summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/boot/dts/sun4i-a10.dtsi6
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-one.dts1
-rw-r--r--arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts2
-rw-r--r--arch/arm/mach-ep93xx/core.c2
-rw-r--r--arch/arm/mach-ixp4xx/avila-setup.c2
-rw-r--r--arch/arm/mach-ixp4xx/dsmg600-setup.c2
-rw-r--r--arch/arm/mach-ixp4xx/fsg-setup.c2
-rw-r--r--arch/arm/mach-ixp4xx/ixdp425-setup.c2
-rw-r--r--arch/arm/mach-ixp4xx/nas100d-setup.c2
-rw-r--r--arch/arm/mach-ixp4xx/nslu2-setup.c2
-rw-r--r--arch/arm/mach-pxa/palmz72.c2
-rw-r--r--arch/arm/mach-pxa/viper.c4
-rw-r--r--arch/arm/mach-sa1100/simpad.c2
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts1
-rw-r--r--drivers/firmware/qcom_scm-32.c8
15 files changed, 20 insertions, 20 deletions
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 77e8436..3a1c6b4 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -76,7 +76,7 @@
allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
<&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
- <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
<&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>,
<&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
@@ -88,7 +88,7 @@
allwinner,pipeline = "de_fe0-de_be0-lcd0";
clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
<&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
- <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_TCON0_CH0>,
+ <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>,
<&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -99,7 +99,7 @@
allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
<&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
- <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
<&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
<&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 3328fe5..232f124 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -117,6 +117,7 @@
phy-handle = <&int_mii_phy>;
phy-mode = "mii";
allwinner,leds-active-low;
+ status = "okay";
};
&hdmi {
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
index d131109..ad17360 100644
--- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
+++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
@@ -51,7 +51,7 @@
leds {
/* The LEDs use PG0~2 pins, which conflict with MMC1 */
- status = "disbaled";
+ status = "disabled";
};
};
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index e70feec..0581ffb 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -323,7 +323,7 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */
static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
/* Use local offsets on gpiochip/port "G" */
GPIO_LOOKUP_IDX("G", 1, NULL, 0,
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 77def61..44cbbce 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -51,7 +51,7 @@ static struct platform_device avila_flash = {
};
static struct gpiod_lookup_table avila_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SDA_PIN,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 0f5c999..397190f 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -70,7 +70,7 @@ static struct platform_device dsmg600_flash = {
};
static struct gpiod_lookup_table dsmg600_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SDA_PIN,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 033f79b..f0a152e 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -56,7 +56,7 @@ static struct platform_device fsg_flash = {
};
static struct gpiod_lookup_table fsg_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", FSG_SDA_PIN,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index b168e2f..3ec829d 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -124,7 +124,7 @@ static struct platform_device ixdp425_flash_nand = {
#endif /* CONFIG_MTD_NAND_PLATFORM */
static struct gpiod_lookup_table ixdp425_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SDA_PIN,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 76dfff0..4138d6a 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -102,7 +102,7 @@ static struct platform_device nas100d_leds = {
};
static struct gpiod_lookup_table nas100d_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NAS100D_SDA_PIN,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 91da63a..341b263 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -70,7 +70,7 @@ static struct platform_device nslu2_flash = {
};
static struct gpiod_lookup_table nslu2_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SDA_PIN,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 5877e54..0adb1bd 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -322,7 +322,7 @@ static struct soc_camera_link palmz72_iclink = {
};
static struct gpiod_lookup_table palmz72_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", 118, NULL, 0,
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 90d0f27..207dcc2 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -460,7 +460,7 @@ static struct platform_device smc91x_device = {
/* i2c */
static struct gpiod_lookup_table viper_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.1",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SDA_GPIO,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
@@ -789,7 +789,7 @@ static int __init viper_tpm_setup(char *str)
__setup("tpm=", viper_tpm_setup);
struct gpiod_lookup_table viper_tpm_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.2",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SDA_GPIO,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index ace0104..f45aed2 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -327,7 +327,7 @@ static struct platform_device simpad_gpio_leds = {
* i2c
*/
static struct gpiod_lookup_table simpad_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("gpio", 21, NULL, 0,
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 724a0d3..edb4ee0 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -299,7 +299,6 @@
/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
dwmmc_0: dwmmc0@f723d000 {
- max-frequency = <150000000>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
non-removable;
diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index dfbd894..4e24e59 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -147,7 +147,7 @@ static u32 smc(u32 cmd_addr)
"smc #0 @ switch to secure world\n"
: "=r" (r0)
: "r" (r0), "r" (r1), "r" (r2)
- : "r3");
+ : "r3", "r12");
} while (r0 == QCOM_SCM_INTERRUPTED);
return r0;
@@ -263,7 +263,7 @@ static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1)
"smc #0 @ switch to secure world\n"
: "=r" (r0)
: "r" (r0), "r" (r1), "r" (r2)
- : "r3");
+ : "r3", "r12");
return r0;
}
@@ -298,7 +298,7 @@ static s32 qcom_scm_call_atomic2(u32 svc, u32 cmd, u32 arg1, u32 arg2)
"smc #0 @ switch to secure world\n"
: "=r" (r0)
: "r" (r0), "r" (r1), "r" (r2), "r" (r3)
- );
+ : "r12");
return r0;
}
@@ -328,7 +328,7 @@ u32 qcom_scm_get_version(void)
"smc #0 @ switch to secure world\n"
: "=r" (r0), "=r" (r1)
: "r" (r0), "r" (r1)
- : "r2", "r3");
+ : "r2", "r3", "r12");
} while (r0 == QCOM_SCM_INTERRUPTED);
version = r1;
OpenPOWER on IntegriCloud