diff options
47 files changed, 2073 insertions, 484 deletions
diff --git a/Documentation/input/input-programming.txt b/Documentation/input/input-programming.txt index 47fc868..81905e8 100644 --- a/Documentation/input/input-programming.txt +++ b/Documentation/input/input-programming.txt @@ -22,7 +22,7 @@ static struct input_dev *button_dev; static void button_interrupt(int irq, void *dummy, struct pt_regs *fp) { - input_report_key(button_dev, BTN_1, inb(BUTTON_PORT) & 1); + input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1); input_sync(button_dev); } diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 9b26fa5..f99112d 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -21,6 +21,8 @@ #include <linux/mmc/host.h> #include <linux/pm.h> #include <linux/delay.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <asm/setup.h> #include <asm/memory.h> @@ -246,6 +248,46 @@ static struct platform_device tosakbd_device = { .id = -1, }; +static struct gpio_keys_button tosa_gpio_keys[] = { + { + .type = EV_PWR, + .code = KEY_SUSPEND, + .gpio = TOSA_GPIO_ON_KEY, + .desc = "On key", + .wakeup = 1, + .active_low = 1, + }, + { + .type = EV_KEY, + .code = TOSA_KEY_RECORD, + .gpio = TOSA_GPIO_RECORD_BTN, + .desc = "Record Button", + .wakeup = 1, + .active_low = 1, + }, + { + .type = EV_KEY, + .code = TOSA_KEY_SYNC, + .gpio = TOSA_GPIO_SYNC, + .desc = "Sync Button", + .wakeup = 1, + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = { + .buttons = tosa_gpio_keys, + .nbuttons = ARRAY_SIZE(tosa_gpio_keys), +}; + +static struct platform_device tosa_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &tosa_gpio_keys_platform_data, + }, +}; + /* * Tosa LEDs */ @@ -258,6 +300,7 @@ static struct platform_device *devices[] __initdata = { &tosascoop_device, &tosascoop_jc_device, &tosakbd_device, + &tosa_gpio_keys_device, &tosaled_device, }; diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index fc54d23..4dbd342 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -38,7 +38,6 @@ #include <linux/kbd_kern.h> #include <linux/kbd_diacr.h> #include <linux/vt_kern.h> -#include <linux/consolemap.h> #include <linux/sysrq.h> #include <linux/input.h> #include <linux/reboot.h> @@ -194,7 +193,7 @@ int getkeycode(unsigned int scancode) int error = -ENODEV; list_for_each_entry(handle, &kbd_handler.h_list, h_node) { - error = handle->dev->getkeycode(handle->dev, scancode, &keycode); + error = input_get_keycode(handle->dev, scancode, &keycode); if (!error) return keycode; } @@ -208,7 +207,7 @@ int setkeycode(unsigned int scancode, unsigned int keycode) int error = -ENODEV; list_for_each_entry(handle, &kbd_handler.h_list, h_node) { - error = handle->dev->setkeycode(handle->dev, scancode, keycode); + error = input_set_keycode(handle->dev, scancode, keycode); if (!error) break; } diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index 63512d9..9dea14d 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -137,6 +137,18 @@ config INPUT_EVBUG To compile this driver as a module, choose M here: the module will be called evbug. +config INPUT_APMPOWER + tristate "Input Power Event -> APM Bridge" if EMBEDDED + depends on INPUT && APM_EMULATION + ---help--- + Say Y here if you want suspend key events to trigger a user + requested suspend through APM. This is useful on embedded + systems where such behviour is desired without userspace + interaction. If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called apm-power. + comment "Input Device Drivers" source "drivers/input/keyboard/Kconfig" diff --git a/drivers/input/Makefile b/drivers/input/Makefile index 99af903..2ae87b1 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -22,3 +22,4 @@ obj-$(CONFIG_INPUT_TABLET) += tablet/ obj-$(CONFIG_INPUT_TOUCHSCREEN) += touchscreen/ obj-$(CONFIG_INPUT_MISC) += misc/ +obj-$(CONFIG_INPUT_APMPOWER) += apm-power.o diff --git a/drivers/input/apm-power.c b/drivers/input/apm-power.c new file mode 100644 index 0000000..c36d110 --- /dev/null +++ b/drivers/input/apm-power.c @@ -0,0 +1,131 @@ +/* + * Input Power Event -> APM Bridge + * + * Copyright (c) 2007 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/apm-emulation.h> + +static void system_power_event(unsigned int keycode) +{ + switch (keycode) { + case KEY_SUSPEND: + apm_queue_event(APM_USER_SUSPEND); + + printk(KERN_INFO "apm-power: Requesting system suspend...\n"); + break; + default: + break; + } +} + +static void apmpower_event(struct input_handle *handle, unsigned int type, + unsigned int code, int value) +{ + /* only react on key down events */ + if (value != 1) + return; + + switch (type) { + case EV_PWR: + system_power_event(code); + break; + + default: + break; + } +} + +static int apmpower_connect(struct input_handler *handler, + struct input_dev *dev, + const struct input_device_id *id) +{ + struct input_handle *handle; + int error; + + handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL); + if (!handle) + return -ENOMEM; + + handle->dev = dev; + handle->handler = handler; + handle->name = "apm-power"; + + handler->private = handle; + + error = input_register_handle(handle); + if (error) { + printk(KERN_ERR + "apm-power: Failed to register input power handler, " + "error %d\n", error); + kfree(handle); + return error; + } + + error = input_open_device(handle); + if (error) { + printk(KERN_ERR + "apm-power: Failed to open input power device, " + "error %d\n", error); + input_unregister_handle(handle); + kfree(handle); + return error; + } + + return 0; +} + +static void apmpower_disconnect(struct input_handle *handler) +{ + struct input_handle *handle = handler->private; + + input_close_device(handle); + kfree(handle); +} + +static const struct input_device_id apmpower_ids[] = { + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT, + .evbit = { BIT_MASK(EV_PWR) }, + }, + { }, +}; + +MODULE_DEVICE_TABLE(input, apmpower_ids); + +static struct input_handler apmpower_handler = { + .event = apmpower_event, + .connect = apmpower_connect, + .disconnect = apmpower_disconnect, + .name = "apm-power", + .id_table = apmpower_ids, +}; + +static int __init apmpower_init(void) +{ + return input_register_handler(&apmpower_handler); +} + +static void __exit apmpower_exit(void) +{ + input_unregister_handler(&apmpower_handler); +} + +module_init(apmpower_init); +module_exit(apmpower_exit); + +MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>"); +MODULE_DESCRIPTION("Input Power Event -> APM Bridge"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index e5b4e9b..0727b0a 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -617,7 +617,7 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, if (get_user(t, ip)) return -EFAULT; - error = dev->getkeycode(dev, t, &v); + error = input_get_keycode(dev, t, &v); if (error) return error; @@ -630,7 +630,7 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, if (get_user(t, ip) || get_user(v, ip + 1)) return -EFAULT; - return dev->setkeycode(dev, t, v); + return input_set_keycode(dev, t, v); case EVIOCSFF: if (copy_from_user(&effect, p, sizeof(effect))) @@ -683,7 +683,7 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, case EV_FF: bits = dev->ffbit; len = FF_MAX; break; case EV_SW: bits = dev->swbit; len = SW_MAX; break; default: return -EINVAL; - } + } return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode); } diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c index 92b3598..490918a 100644 --- a/drivers/input/input-polldev.c +++ b/drivers/input/input-polldev.c @@ -60,17 +60,21 @@ static void input_polled_device_work(struct work_struct *work) { struct input_polled_dev *dev = container_of(work, struct input_polled_dev, work.work); + unsigned long delay; dev->poll(dev); - queue_delayed_work(polldev_wq, &dev->work, - msecs_to_jiffies(dev->poll_interval)); + + delay = msecs_to_jiffies(dev->poll_interval); + if (delay >= HZ) + delay = round_jiffies_relative(delay); + + queue_delayed_work(polldev_wq, &dev->work, delay); } static int input_open_polled_device(struct input_dev *input) { struct input_polled_dev *dev = input->private; int error; - unsigned long ticks; error = input_polldev_start_workqueue(); if (error) @@ -79,10 +83,8 @@ static int input_open_polled_device(struct input_dev *input) if (dev->flush) dev->flush(dev); - ticks = msecs_to_jiffies(dev->poll_interval); - if (ticks >= HZ) - ticks = round_jiffies(ticks); - queue_delayed_work(polldev_wq, &dev->work, ticks); + queue_delayed_work(polldev_wq, &dev->work, + msecs_to_jiffies(dev->poll_interval)); return 0; } @@ -91,7 +93,7 @@ static void input_close_polled_device(struct input_dev *input) { struct input_polled_dev *dev = input->private; - cancel_rearming_delayed_workqueue(polldev_wq, &dev->work); + cancel_delayed_work_sync(&dev->work); input_polldev_stop_workqueue(); } diff --git a/drivers/input/input.c b/drivers/input/input.c index a0be978..f02c242 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -493,7 +493,7 @@ static void input_disconnect_device(struct input_dev *dev) if (is_event_supported(EV_KEY, dev->evbit, EV_MAX)) { for (code = 0; code <= KEY_MAX; code++) { if (is_event_supported(code, dev->keybit, KEY_MAX) && - test_bit(code, dev->key)) { + __test_and_clear_bit(code, dev->key)) { input_pass_event(dev, EV_KEY, code, 0); } } @@ -526,7 +526,7 @@ static int input_default_getkeycode(struct input_dev *dev, if (!dev->keycodesize) return -EINVAL; - if (scancode < 0 || scancode >= dev->keycodemax) + if (scancode >= dev->keycodemax) return -EINVAL; *keycode = input_fetch_keycode(dev, scancode); @@ -540,10 +540,7 @@ static int input_default_setkeycode(struct input_dev *dev, int old_keycode; int i; - if (scancode < 0 || scancode >= dev->keycodemax) - return -EINVAL; - - if (keycode < 0 || keycode > KEY_MAX) + if (scancode >= dev->keycodemax) return -EINVAL; if (!dev->keycodesize) @@ -586,6 +583,75 @@ static int input_default_setkeycode(struct input_dev *dev, return 0; } +/** + * input_get_keycode - retrieve keycode currently mapped to a given scancode + * @dev: input device which keymap is being queried + * @scancode: scancode (or its equivalent for device in question) for which + * keycode is needed + * @keycode: result + * + * This function should be called by anyone interested in retrieving current + * keymap. Presently keyboard and evdev handlers use it. + */ +int input_get_keycode(struct input_dev *dev, int scancode, int *keycode) +{ + if (scancode < 0) + return -EINVAL; + + return dev->getkeycode(dev, scancode, keycode); +} +EXPORT_SYMBOL(input_get_keycode); + +/** + * input_get_keycode - assign new keycode to a given scancode + * @dev: input device which keymap is being updated + * @scancode: scancode (or its equivalent for device in question) + * @keycode: new keycode to be assigned to the scancode + * + * This function should be called by anyone needing to update current + * keymap. Presently keyboard and evdev handlers use it. + */ +int input_set_keycode(struct input_dev *dev, int scancode, int keycode) +{ + unsigned long flags; + int old_keycode; + int retval; + + if (scancode < 0) + return -EINVAL; + + if (keycode < 0 || keycode > KEY_MAX) + return -EINVAL; + + spin_lock_irqsave(&dev->event_lock, flags); + + retval = dev->getkeycode(dev, scancode, &old_keycode); + if (retval) + goto out; + + retval = dev->setkeycode(dev, scancode, keycode); + if (retval) + goto out; + + /* + * Simulate keyup event if keycode is not present + * in the keymap anymore + */ + if (test_bit(EV_KEY, dev->evbit) && + !is_event_supported(old_keycode, dev->keybit, KEY_MAX) && + __test_and_clear_bit(old_keycode, dev->key)) { + + input_pass_event(dev, EV_KEY, old_keycode, 0); + if (dev->sync) + input_pass_event(dev, EV_SYN, SYN_REPORT, 1); + } + + out: + spin_unlock_irqrestore(&dev->event_lock, flags); + + return retval; +} +EXPORT_SYMBOL(input_set_keycode); #define MATCH_BIT(bit, max) \ for (i = 0; i < BITS_TO_LONGS(max); i++) \ @@ -755,7 +821,7 @@ static int input_devices_seq_show(struct seq_file *seq, void *v) return 0; } -static struct seq_operations input_devices_seq_ops = { +static const struct seq_operations input_devices_seq_ops = { .start = input_devices_seq_start, .next = input_devices_seq_next, .stop = input_devices_seq_stop, @@ -808,7 +874,7 @@ static int input_handlers_seq_show(struct seq_file *seq, void *v) return 0; } -static struct seq_operations input_handlers_seq_ops = { +static const struct seq_operations input_handlers_seq_ops = { .start = input_handlers_seq_start, .next = input_handlers_seq_next, .stop = input_handlers_seq_stop, @@ -1329,9 +1395,6 @@ int input_register_device(struct input_dev *dev) snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id), "input%ld", (unsigned long) atomic_inc_return(&input_no) - 1); - if (dev->cdev.dev) - dev->dev.parent = dev->cdev.dev; - error = device_add(&dev->dev); if (error) return error; diff --git a/drivers/input/joystick/amijoy.c b/drivers/input/joystick/amijoy.c index 5cf9f36..deb9f82 100644 --- a/drivers/input/joystick/amijoy.c +++ b/drivers/input/joystick/amijoy.c @@ -32,7 +32,6 @@ #include <linux/errno.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/init.h> #include <linux/input.h> #include <linux/interrupt.h> diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c index 1573988..f32e031 100644 --- a/drivers/input/joystick/analog.c +++ b/drivers/input/joystick/analog.c @@ -31,7 +31,6 @@ #include <linux/delay.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/slab.h> #include <linux/bitops.h> #include <linux/init.h> diff --git a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c index a6ca9d5..960e501 100644 --- a/drivers/input/joystick/db9.c +++ b/drivers/input/joystick/db9.c @@ -33,7 +33,6 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/parport.h> diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c index df2a9d0..07a32af 100644 --- a/drivers/input/joystick/gamecon.c +++ b/drivers/input/joystick/gamecon.c @@ -33,7 +33,6 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/init.h> #include <linux/parport.h> #include <linux/input.h> diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c index 6f826b3..a2517fa 100644 --- a/drivers/input/joystick/iforce/iforce-main.c +++ b/drivers/input/joystick/iforce/iforce-main.c @@ -85,7 +85,7 @@ static struct iforce_device iforce_device[] = { static int iforce_playback(struct input_dev *dev, int effect_id, int value) { - struct iforce* iforce = dev->private; + struct iforce *iforce = input_get_drvdata(dev); struct iforce_core_effect *core_effect = &iforce->core_effects[effect_id]; if (value > 0) @@ -99,7 +99,7 @@ static int iforce_playback(struct input_dev *dev, int effect_id, int value) static void iforce_set_gain(struct input_dev *dev, u16 gain) { - struct iforce* iforce = dev->private; + struct iforce *iforce = input_get_drvdata(dev); unsigned char data[3]; data[0] = gain >> 9; @@ -108,7 +108,7 @@ static void iforce_set_gain(struct input_dev *dev, u16 gain) static void iforce_set_autocenter(struct input_dev *dev, u16 magnitude) { - struct iforce* iforce = dev->private; + struct iforce *iforce = input_get_drvdata(dev); unsigned char data[3]; data[0] = 0x03; @@ -126,7 +126,7 @@ static void iforce_set_autocenter(struct input_dev *dev, u16 magnitude) */ static int iforce_upload_effect(struct input_dev *dev, struct ff_effect *effect, struct ff_effect *old) { - struct iforce* iforce = dev->private; + struct iforce *iforce = input_get_drvdata(dev); struct iforce_core_effect *core_effect = &iforce->core_effects[effect->id]; int ret; @@ -173,7 +173,7 @@ static int iforce_upload_effect(struct input_dev *dev, struct ff_effect *effect, */ static int iforce_erase_effect(struct input_dev *dev, int effect_id) { - struct iforce *iforce = dev->private; + struct iforce *iforce = input_get_drvdata(dev); struct iforce_core_effect *core_effect = &iforce->core_effects[effect_id]; int err = 0; @@ -191,7 +191,7 @@ static int iforce_erase_effect(struct input_dev *dev, int effect_id) static int iforce_open(struct input_dev *dev) { - struct iforce *iforce = dev->private; + struct iforce *iforce = input_get_drvdata(dev); switch (iforce->bus) { #ifdef CONFIG_JOYSTICK_IFORCE_USB @@ -213,7 +213,7 @@ static int iforce_open(struct input_dev *dev) static void iforce_release(struct input_dev *dev) { - struct iforce *iforce = dev->private; + struct iforce *iforce = input_get_drvdata(dev); int i; if (test_bit(EV_FF, dev->evbit)) { @@ -298,7 +298,8 @@ int iforce_init_device(struct iforce *iforce) #endif } - input_dev->private = iforce; + input_set_drvdata(input_dev, iforce); + input_dev->name = "Unknown I-Force device"; input_dev->open = iforce_open; input_dev->close = iforce_release; diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c index bbebd4e..989483f 100644 --- a/drivers/input/joystick/turbografx.c +++ b/drivers/input/joystick/turbografx.c @@ -35,7 +35,6 @@ #include <linux/parport.h> #include <linux/input.h> #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/init.h> #include <linux/mutex.h> diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 6e9d75b..0380597 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -75,7 +75,6 @@ #include <linux/slab.h> #include <linux/stat.h> #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/usb/input.h> #define DRIVER_VERSION "v0.0.6" diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 086d58c..8ea709b 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -154,6 +154,27 @@ config KEYBOARD_SPITZ To compile this driver as a module, choose M here: the module will be called spitzkbd. +config KEYBOARD_TOSA + tristate "Tosa keyboard" + depends on MACH_TOSA + default y + help + Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) + + To compile this driver as a module, choose M here: the + module will be called tosakbd. + +config KEYBOARD_TOSA_USE_EXT_KEYCODES + bool "Tosa keyboard: use extended keycodes" + depends on KEYBOARD_TOSA + default n + help + Say Y here to enable the tosa keyboard driver to generate extended + (>= 127) keycodes. Be aware, that they can't be correctly interpreted + by either console keyboard driver or by Kdrive keybd driver. + + Say Y only if you know, what you are doing! + config KEYBOARD_AMIGA tristate "Amiga keyboard" depends on AMIGA @@ -239,13 +260,13 @@ config KEYBOARD_OMAP module will be called omap-keypad. config KEYBOARD_PXA27x - tristate "PXA27x keyboard support" - depends on PXA27x + tristate "PXA27x/PXA3xx keypad support" + depends on PXA27x || PXA3xx help - Enable support for PXA27x matrix keyboard controller + Enable support for PXA27x/PXA3xx keypad controller To compile this driver as a module, choose M here: the - module will be called pxa27x_keyboard. + module will be called pxa27x_keypad. config KEYBOARD_AAED2000 tristate "AAED-2000 keyboard" diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index e97455f..e741f40 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -15,10 +15,11 @@ obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o +obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o -obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keyboard.o +obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index b39c5b3..4a95adc 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -19,7 +19,6 @@ #include <linux/delay.h> #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/init.h> @@ -28,6 +27,7 @@ #include <linux/workqueue.h> #include <linux/libps2.h> #include <linux/mutex.h> +#include <linux/dmi.h> #define DRIVER_DESC "AT and PS/2 keyboard driver" @@ -201,6 +201,7 @@ struct atkbd { unsigned short id; unsigned char keycode[512]; + DECLARE_BITMAP(force_release_mask, 512); unsigned char set; unsigned char translated; unsigned char extra; @@ -225,6 +226,11 @@ struct atkbd { unsigned long event_mask; }; +/* + * System-specific ketymap fixup routine + */ +static void (*atkbd_platform_fixup)(struct atkbd *); + static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, ssize_t (*handler)(struct atkbd *, char *)); static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count, @@ -349,7 +355,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, struct atkbd *atkbd = serio_get_drvdata(serio); struct input_dev *dev = atkbd->dev; unsigned int code = data; - int scroll = 0, hscroll = 0, click = -1, add_release_event = 0; + int scroll = 0, hscroll = 0, click = -1; int value; unsigned char keycode; @@ -414,14 +420,6 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, "Some program might be trying access hardware directly.\n", data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys); goto out; - case ATKBD_RET_HANGEUL: - case ATKBD_RET_HANJA: - /* - * These keys do not report release and thus need to be - * flagged properly - */ - add_release_event = 1; - break; case ATKBD_RET_ERR: atkbd->err_count++; #ifdef ATKBD_DEBUG @@ -491,7 +489,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, input_event(dev, EV_KEY, keycode, value); input_sync(dev); - if (value && add_release_event) { + if (value && test_bit(code, atkbd->force_release_mask)) { input_report_key(dev, keycode, 0); input_sync(dev); } @@ -824,7 +822,6 @@ static void atkbd_disconnect(struct serio *serio) atkbd_disable(atkbd); /* make sure we don't have a command in flight */ - synchronize_sched(); /* Allow atkbd_interrupt()s to complete. */ flush_scheduled_work(); sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group); @@ -834,6 +831,22 @@ static void atkbd_disconnect(struct serio *serio) kfree(atkbd); } +/* + * Most special keys (Fn+F?) on Dell Latitudes do not generate release + * events so we have to do it ourselves. + */ +static void atkbd_latitude_keymap_fixup(struct atkbd *atkbd) +{ + const unsigned int forced_release_keys[] = { + 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93, + }; + int i; + + if (atkbd->set == 2) + for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++) + __set_bit(forced_release_keys[i], + atkbd->force_release_mask); +} /* * atkbd_set_keycode_table() initializes keyboard's keycode table @@ -842,17 +855,20 @@ static void atkbd_disconnect(struct serio *serio) static void atkbd_set_keycode_table(struct atkbd *atkbd) { + unsigned int scancode; int i, j; memset(atkbd->keycode, 0, sizeof(atkbd->keycode)); + bitmap_zero(atkbd->force_release_mask, 512); if (atkbd->translated) { for (i = 0; i < 128; i++) { - atkbd->keycode[i] = atkbd_set2_keycode[atkbd_unxlate_table[i]]; - atkbd->keycode[i | 0x80] = atkbd_set2_keycode[atkbd_unxlate_table[i] | 0x80]; + scancode = atkbd_unxlate_table[i]; + atkbd->keycode[i] = atkbd_set2_keycode[scancode]; + atkbd->keycode[i | 0x80] = atkbd_set2_keycode[scancode | 0x80]; if (atkbd->scroll) for (j = 0; j < ARRAY_SIZE(atkbd_scroll_keys); j++) - if ((atkbd_unxlate_table[i] | 0x80) == atkbd_scroll_keys[j].set2) + if ((scancode | 0x80) == atkbd_scroll_keys[j].set2) atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode; } } else if (atkbd->set == 3) { @@ -861,12 +877,29 @@ static void atkbd_set_keycode_table(struct atkbd *atkbd) memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode)); if (atkbd->scroll) - for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++) - atkbd->keycode[atkbd_scroll_keys[i].set2] = atkbd_scroll_keys[i].keycode; + for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++) { + scancode = atkbd_scroll_keys[i].set2; + atkbd->keycode[scancode] = atkbd_scroll_keys[i].keycode; + } } - atkbd->keycode[atkbd_compat_scancode(atkbd, ATKBD_RET_HANGEUL)] = KEY_HANGUEL; - atkbd->keycode[atkbd_compat_scancode(atkbd, ATKBD_RET_HANJA)] = KEY_HANJA; +/* + * HANGEUL and HANJA keys do not send release events so we need to + * generate such events ourselves + */ + scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANGEUL); + atkbd->keycode[scancode] = KEY_HANGEUL; + __set_bit(scancode, atkbd->force_release_mask); + + scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANJA); + atkbd->keycode[scancode] = KEY_HANJA; + __set_bit(scancode, atkbd->force_release_mask); + +/* + * Perform additional fixups + */ + if (atkbd_platform_fixup) + atkbd_platform_fixup(atkbd); } /* @@ -1401,9 +1434,29 @@ static ssize_t atkbd_show_err_count(struct atkbd *atkbd, char *buf) return sprintf(buf, "%lu\n", atkbd->err_count); } +static int __init atkbd_setup_fixup(const struct dmi_system_id *id) +{ + atkbd_platform_fixup = id->driver_data; + return 0; +} + +static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { + { + .ident = "Dell Latitude series", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude"), + }, + .callback = atkbd_setup_fixup, + .driver_data = atkbd_latitude_keymap_fixup, + }, + { } +}; static int __init atkbd_init(void) { + dmi_check_system(atkbd_dmi_quirk_table); + return serio_register_driver(&atkbd_drv); } diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c index 1b08f4e..32e2c26 100644 --- a/drivers/input/keyboard/lkkbd.c +++ b/drivers/input/keyboard/lkkbd.c @@ -64,7 +64,6 @@ #include <linux/delay.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/interrupt.h> #include <linux/init.h> #include <linux/input.h> diff --git a/drivers/input/keyboard/pxa27x_keyboard.c b/drivers/input/keyboard/pxa27x_keyboard.c deleted file mode 100644 index bdd64ee..0000000 --- a/drivers/input/keyboard/pxa27x_keyboard.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * linux/drivers/input/keyboard/pxa27x_keyboard.c - * - * Driver for the pxa27x matrix keyboard controller. - * - * Created: Feb 22, 2007 - * Author: Rodolfo Giometti <giometti@linux.it> - * - * Based on a previous implementations by Kevin O'Connor - * <kevin_at_koconnor.net> and Alex Osborne <bobofdoom@gmail.com> and - * on some suggestions by Nicolas Pitre <nico@cam.org>. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/input.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/err.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <asm/arch/hardware.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/irqs.h> -#include <asm/arch/pxa27x_keyboard.h> - -#define DRIVER_NAME "pxa27x-keyboard" - -#define KPASMKP(col) (col/2 == 0 ? KPASMKP0 : \ - col/2 == 1 ? KPASMKP1 : \ - col/2 == 2 ? KPASMKP2 : KPASMKP3) -#define KPASMKPx_MKC(row, col) (1 << (row + 16 * (col % 2))) - -static struct clk *pxakbd_clk; - -static irqreturn_t pxakbd_irq_handler(int irq, void *dev_id) -{ - struct platform_device *pdev = dev_id; - struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data; - struct input_dev *input_dev = platform_get_drvdata(pdev); - unsigned long kpc = KPC; - int p, row, col, rel; - - if (kpc & KPC_DI) { - unsigned long kpdk = KPDK; - - if (!(kpdk & KPDK_DKP)) { - /* better luck next time */ - } else if (kpc & KPC_REE0) { - unsigned long kprec = KPREC; - KPREC = 0x7f; - - if (kprec & KPREC_OF0) - rel = (kprec & 0xff) + 0x7f; - else if (kprec & KPREC_UF0) - rel = (kprec & 0xff) - 0x7f - 0xff; - else - rel = (kprec & 0xff) - 0x7f; - - if (rel) { - input_report_rel(input_dev, REL_WHEEL, rel); - input_sync(input_dev); - } - } - } - - if (kpc & KPC_MI) { - /* report the status of every button */ - for (row = 0; row < pdata->nr_rows; row++) { - for (col = 0; col < pdata->nr_cols; col++) { - p = KPASMKP(col) & KPASMKPx_MKC(row, col) ? - 1 : 0; - pr_debug("keycode %x - pressed %x\n", - pdata->keycodes[row][col], p); - input_report_key(input_dev, - pdata->keycodes[row][col], p); - } - } - input_sync(input_dev); - } - - return IRQ_HANDLED; -} - -static int pxakbd_open(struct input_dev *dev) -{ - /* Set keypad control register */ - KPC |= (KPC_ASACT | - KPC_MS_ALL | - (2 << 6) | KPC_REE0 | KPC_DK_DEB_SEL | - KPC_ME | KPC_MIE | KPC_DE | KPC_DIE); - - KPC &= ~KPC_AS; /* disable automatic scan */ - KPC &= ~KPC_IMKP; /* do not ignore multiple keypresses */ - - /* Set rotary count to mid-point value */ - KPREC = 0x7F; - - /* Enable unit clock */ - clk_enable(pxakbd_clk); - - return 0; -} - -static void pxakbd_close(struct input_dev *dev) -{ - /* Disable clock unit */ - clk_disable(pxakbd_clk); -} - -#ifdef CONFIG_PM -static int pxakbd_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data; - - /* Save controller status */ - pdata->reg_kpc = KPC; - pdata->reg_kprec = KPREC; - - return 0; -} - -static int pxakbd_resume(struct platform_device *pdev) -{ - struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data; - struct input_dev *input_dev = platform_get_drvdata(pdev); - - mutex_lock(&input_dev->mutex); - - if (input_dev->users) { - /* Restore controller status */ - KPC = pdata->reg_kpc; - KPREC = pdata->reg_kprec; - - /* Enable unit clock */ - clk_disable(pxakbd_clk); - clk_enable(pxakbd_clk); - } - - mutex_unlock(&input_dev->mutex); - - return 0; -} -#else -#define pxakbd_suspend NULL -#define pxakbd_resume NULL -#endif - -static int __devinit pxakbd_probe(struct platform_device *pdev) -{ - struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data; - struct input_dev *input_dev; - int i, row, col, error; - - pxakbd_clk = clk_get(&pdev->dev, "KBDCLK"); - if (IS_ERR(pxakbd_clk)) { - error = PTR_ERR(pxakbd_clk); - goto err_clk; - } - - /* Create and register the input driver. */ - input_dev = input_allocate_device(); - if (!input_dev) { - printk(KERN_ERR "Cannot request keypad device\n"); - error = -ENOMEM; - goto err_alloc; - } - - input_dev->name = DRIVER_NAME; - input_dev->id.bustype = BUS_HOST; - input_dev->open = pxakbd_open; - input_dev->close = pxakbd_close; - input_dev->dev.parent = &pdev->dev; - - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | - BIT_MASK(EV_REL); - input_dev->relbit[BIT_WORD(REL_WHEEL)] = BIT_MASK(REL_WHEEL); - for (row = 0; row < pdata->nr_rows; row++) { - for (col = 0; col < pdata->nr_cols; col++) { - int code = pdata->keycodes[row][col]; - if (code > 0) - set_bit(code, input_dev->keybit); - } - } - - error = request_irq(IRQ_KEYPAD, pxakbd_irq_handler, IRQF_DISABLED, - DRIVER_NAME, pdev); - if (error) { - printk(KERN_ERR "Cannot request keypad IRQ\n"); - goto err_free_dev; - } - - platform_set_drvdata(pdev, input_dev); - - /* Register the input device */ - error = input_register_device(input_dev); - if (error) - goto err_free_irq; - - /* Setup GPIOs. */ - for (i = 0; i < pdata->nr_rows + pdata->nr_cols; i++) - pxa_gpio_mode(pdata->gpio_modes[i]); - - /* - * Store rows/cols info into keyboard registers. - */ - - KPC |= (pdata->nr_rows - 1) << 26; - KPC |= (pdata->nr_cols - 1) << 23; - - for (col = 0; col < pdata->nr_cols; col++) - KPC |= KPC_MS0 << col; - - return 0; - - err_free_irq: - platform_set_drvdata(pdev, NULL); - free_irq(IRQ_KEYPAD, pdev); - err_free_dev: - input_free_device(input_dev); - err_alloc: - clk_put(pxakbd_clk); - err_clk: - return error; -} - -static int __devexit pxakbd_remove(struct platform_device *pdev) -{ - struct input_dev *input_dev = platform_get_drvdata(pdev); - - input_unregister_device(input_dev); - free_irq(IRQ_KEYPAD, pdev); - clk_put(pxakbd_clk); - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static struct platform_driver pxakbd_driver = { - .probe = pxakbd_probe, - .remove = __devexit_p(pxakbd_remove), - .suspend = pxakbd_suspend, - .resume = pxakbd_resume, - .driver = { - .name = DRIVER_NAME, - }, -}; - -static int __init pxakbd_init(void) -{ - return platform_driver_register(&pxakbd_driver); -} - -static void __exit pxakbd_exit(void) -{ - platform_driver_unregister(&pxakbd_driver); -} - -module_init(pxakbd_init); -module_exit(pxakbd_exit); - -MODULE_DESCRIPTION("PXA27x Matrix Keyboard Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c new file mode 100644 index 0000000..6224c2f --- /dev/null +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -0,0 +1,572 @@ +/* + * linux/drivers/input/keyboard/pxa27x_keypad.c + * + * Driver for the pxa27x matrix keyboard controller. + * + * Created: Feb 22, 2007 + * Author: Rodolfo Giometti <giometti@linux.it> + * + * Based on a previous implementations by Kevin O'Connor + * <kevin_at_koconnor.net> and Alex Osborne <bobofdoom@gmail.com> and + * on some suggestions by Nicolas Pitre <nico@cam.org>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/hardware.h> +#include <asm/arch/pxa27x_keypad.h> + +/* + * Keypad Controller registers + */ +#define KPC 0x0000 /* Keypad Control register */ +#define KPDK 0x0008 /* Keypad Direct Key register */ +#define KPREC 0x0010 /* Keypad Rotary Encoder register */ +#define KPMK 0x0018 /* Keypad Matrix Key register */ +#define KPAS 0x0020 /* Keypad Automatic Scan register */ + +/* Keypad Automatic Scan Multiple Key Presser register 0-3 */ +#define KPASMKP0 0x0028 +#define KPASMKP1 0x0030 +#define KPASMKP2 0x0038 +#define KPASMKP3 0x0040 +#define KPKDI 0x0048 + +/* bit definitions */ +#define KPC_MKRN(n) ((((n) & 0x7) - 1) << 26) /* matrix key row number */ +#define KPC_MKCN(n) ((((n) & 0x7) - 1) << 23) /* matrix key column number */ +#define KPC_DKN(n) ((((n) & 0x7) - 1) << 6) /* direct key number */ + +#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ +#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ +#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ +#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ + +#define KPC_MS(n) (0x1 << (13 + (n))) /* Matrix scan line 'n' */ +#define KPC_MS_ALL (0xff << 13) + +#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ +#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ +#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Keypad Debounce Select */ +#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ +#define KPC_RE_ZERO_DEB (0x1 << 4) /* Rotary Encoder Zero Debounce */ +#define KPC_REE1 (0x1 << 3) /* Rotary Encoder1 Enable */ +#define KPC_REE0 (0x1 << 2) /* Rotary Encoder0 Enable */ +#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ +#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ + +#define KPDK_DKP (0x1 << 31) +#define KPDK_DK(n) ((n) & 0xff) + +#define KPREC_OF1 (0x1 << 31) +#define kPREC_UF1 (0x1 << 30) +#define KPREC_OF0 (0x1 << 15) +#define KPREC_UF0 (0x1 << 14) + +#define KPREC_RECOUNT0(n) ((n) & 0xff) +#define KPREC_RECOUNT1(n) (((n) >> 16) & 0xff) + +#define KPMK_MKP (0x1 << 31) +#define KPAS_SO (0x1 << 31) +#define KPASMKPx_SO (0x1 << 31) + +#define KPAS_MUKP(n) (((n) >> 26) & 0x1f) +#define KPAS_RP(n) (((n) >> 4) & 0xf) +#define KPAS_CP(n) ((n) & 0xf) + +#define KPASMKP_MKC_MASK (0xff) + +#define keypad_readl(off) __raw_readl(keypad->mmio_base + (off)) +#define keypad_writel(off, v) __raw_writel((v), keypad->mmio_base + (off)) + +#define MAX_MATRIX_KEY_NUM (8 * 8) + +struct pxa27x_keypad { + struct pxa27x_keypad_platform_data *pdata; + + struct clk *clk; + struct input_dev *input_dev; + void __iomem *mmio_base; + + /* matrix key code map */ + unsigned int matrix_keycodes[MAX_MATRIX_KEY_NUM]; + + /* state row bits of each column scan */ + uint32_t matrix_key_state[MAX_MATRIX_KEY_COLS]; + uint32_t direct_key_state; + + unsigned int direct_key_mask; + + int rotary_rel_code[2]; + int rotary_up_key[2]; + int rotary_down_key[2]; +}; + +static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad) +{ + struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + struct input_dev *input_dev = keypad->input_dev; + unsigned int *key; + int i; + + key = &pdata->matrix_key_map[0]; + for (i = 0; i < pdata->matrix_key_map_size; i++, key++) { + int row = ((*key) >> 28) & 0xf; + int col = ((*key) >> 24) & 0xf; + int code = (*key) & 0xffffff; + + keypad->matrix_keycodes[(row << 3) + col] = code; + set_bit(code, input_dev->keybit); + } + + keypad->rotary_up_key[0] = pdata->rotary0_up_key; + keypad->rotary_up_key[1] = pdata->rotary1_up_key; + keypad->rotary_down_key[0] = pdata->rotary0_down_key; + keypad->rotary_down_key[1] = pdata->rotary1_down_key; + keypad->rotary_rel_code[0] = pdata->rotary0_rel_code; + keypad->rotary_rel_code[1] = pdata->rotary1_rel_code; + + if (pdata->rotary0_up_key && pdata->rotary0_down_key) { + set_bit(pdata->rotary0_up_key, input_dev->keybit); + set_bit(pdata->rotary0_down_key, input_dev->keybit); + } else + set_bit(pdata->rotary0_rel_code, input_dev->relbit); + + if (pdata->rotary1_up_key && pdata->rotary1_down_key) { + set_bit(pdata->rotary1_up_key, input_dev->keybit); + set_bit(pdata->rotary1_down_key, input_dev->keybit); + } else + set_bit(pdata->rotary1_rel_code, input_dev->relbit); +} + +static inline unsigned int lookup_matrix_keycode( + struct pxa27x_keypad *keypad, int row, int col) +{ + return keypad->matrix_keycodes[(row << 3) + col]; +} + +static void pxa27x_keypad_scan_matrix(struct pxa27x_keypad *keypad) +{ + struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + int row, col, num_keys_pressed = 0; + uint32_t new_state[MAX_MATRIX_KEY_COLS]; + uint32_t kpas = keypad_readl(KPAS); + + num_keys_pressed = KPAS_MUKP(kpas); + + memset(new_state, 0, sizeof(new_state)); + + if (num_keys_pressed == 0) + goto scan; + + if (num_keys_pressed == 1) { + col = KPAS_CP(kpas); + row = KPAS_RP(kpas); + + /* if invalid row/col, treat as no key pressed */ + if (col >= pdata->matrix_key_cols || + row >= pdata->matrix_key_rows) + goto scan; + + new_state[col] = (1 << row); + goto scan; + } + + if (num_keys_pressed > 1) { + uint32_t kpasmkp0 = keypad_readl(KPASMKP0); + uint32_t kpasmkp1 = keypad_readl(KPASMKP1); + uint32_t kpasmkp2 = keypad_readl(KPASMKP2); + uint32_t kpasmkp3 = keypad_readl(KPASMKP3); + + new_state[0] = kpasmkp0 & KPASMKP_MKC_MASK; + new_state[1] = (kpasmkp0 >> 16) & KPASMKP_MKC_MASK; + new_state[2] = kpasmkp1 & KPASMKP_MKC_MASK; + new_state[3] = (kpasmkp1 >> 16) & KPASMKP_MKC_MASK; + new_state[4] = kpasmkp2 & KPASMKP_MKC_MASK; + new_state[5] = (kpasmkp2 >> 16) & KPASMKP_MKC_MASK; + new_state[6] = kpasmkp3 & KPASMKP_MKC_MASK; + new_state[7] = (kpasmkp3 >> 16) & KPASMKP_MKC_MASK; + } +scan: + for (col = 0; col < pdata->matrix_key_cols; col++) { + uint32_t bits_changed; + + bits_changed = keypad->matrix_key_state[col] ^ new_state[col]; + if (bits_changed == 0) + continue; + + for (row = 0; row < pdata->matrix_key_rows; row++) { + if ((bits_changed & (1 << row)) == 0) + continue; + + input_report_key(keypad->input_dev, + lookup_matrix_keycode(keypad, row, col), + new_state[col] & (1 << row)); + } + } + input_sync(keypad->input_dev); + memcpy(keypad->matrix_key_state, new_state, sizeof(new_state)); +} + +#define DEFAULT_KPREC (0x007f007f) + +static inline int rotary_delta(uint32_t kprec) +{ + if (kprec & KPREC_OF0) + return (kprec & 0xff) + 0x7f; + else if (kprec & KPREC_UF0) + return (kprec & 0xff) - 0x7f - 0xff; + else + return (kprec & 0xff) - 0x7f; +} + +static void report_rotary_event(struct pxa27x_keypad *keypad, int r, int delta) +{ + struct input_dev *dev = keypad->input_dev; + + if (delta == 0) + return; + + if (keypad->rotary_up_key[r] && keypad->rotary_down_key[r]) { + int keycode = (delta > 0) ? keypad->rotary_up_key[r] : + keypad->rotary_down_key[r]; + + /* simulate a press-n-release */ + input_report_key(dev, keycode, 1); + input_sync(dev); + input_report_key(dev, keycode, 0); + input_sync(dev); + } else { + input_report_rel(dev, keypad->rotary_rel_code[r], delta); + input_sync(dev); + } +} + +static void pxa27x_keypad_scan_rotary(struct pxa27x_keypad *keypad) +{ + struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + uint32_t kprec; + + /* read and reset to default count value */ + kprec = keypad_readl(KPREC); + keypad_writel(KPREC, DEFAULT_KPREC); + + if (pdata->enable_rotary0) + report_rotary_event(keypad, 0, rotary_delta(kprec)); + + if (pdata->enable_rotary1) + report_rotary_event(keypad, 1, rotary_delta(kprec >> 16)); +} + +static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad) +{ + struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + unsigned int new_state; + uint32_t kpdk, bits_changed; + int i; + + kpdk = keypad_readl(KPDK); + + if (pdata->enable_rotary0 || pdata->enable_rotary1) + pxa27x_keypad_scan_rotary(keypad); + + if (pdata->direct_key_map == NULL) + return; + + new_state = KPDK_DK(kpdk) & keypad->direct_key_mask; + bits_changed = keypad->direct_key_state ^ new_state; + + if (bits_changed == 0) + return; + + for (i = 0; i < pdata->direct_key_num; i++) { + if (bits_changed & (1 << i)) + input_report_key(keypad->input_dev, + pdata->direct_key_map[i], + (new_state & (1 << i))); + } + input_sync(keypad->input_dev); + keypad->direct_key_state = new_state; +} + +static irqreturn_t pxa27x_keypad_irq_handler(int irq, void *dev_id) +{ + struct pxa27x_keypad *keypad = dev_id; + unsigned long kpc = keypad_readl(KPC); + + if (kpc & KPC_DI) + pxa27x_keypad_scan_direct(keypad); + + if (kpc & KPC_MI) + pxa27x_keypad_scan_matrix(keypad); + + return IRQ_HANDLED; +} + +static void pxa27x_keypad_config(struct pxa27x_keypad *keypad) +{ + struct pxa27x_keypad_platform_data *pdata = keypad->pdata; + unsigned int mask = 0, direct_key_num = 0; + unsigned long kpc = 0; + + /* enable matrix keys with automatic scan */ + if (pdata->matrix_key_rows && pdata->matrix_key_cols) { + kpc |= KPC_ASACT | KPC_MIE | KPC_ME | KPC_MS_ALL; + kpc |= KPC_MKRN(pdata->matrix_key_rows) | + KPC_MKCN(pdata->matrix_key_cols); + } + + /* enable rotary key, debounce interval same as direct keys */ + if (pdata->enable_rotary0) { + mask |= 0x03; + direct_key_num = 2; + kpc |= KPC_REE0; + } + + if (pdata->enable_rotary1) { + mask |= 0x0c; + direct_key_num = 4; + kpc |= KPC_REE1; + } + + if (pdata->direct_key_num > direct_key_num) + direct_key_num = pdata->direct_key_num; + + keypad->direct_key_mask = ((2 << direct_key_num) - 1) & ~mask; + + /* enable direct key */ + if (direct_key_num) + kpc |= KPC_DE | KPC_DIE | KPC_DKN(direct_key_num); + + keypad_writel(KPC, kpc | KPC_RE_ZERO_DEB); + keypad_writel(KPREC, DEFAULT_KPREC); + keypad_writel(KPKDI, pdata->debounce_interval); +} + +static int pxa27x_keypad_open(struct input_dev *dev) +{ + struct pxa27x_keypad *keypad = input_get_drvdata(dev); + + /* Enable unit clock */ + clk_enable(keypad->clk); + pxa27x_keypad_config(keypad); + + return 0; +} + +static void pxa27x_keypad_close(struct input_dev *dev) +{ + struct pxa27x_keypad *keypad = input_get_drvdata(dev); + + /* Disable clock unit */ + clk_disable(keypad->clk); +} + +#ifdef CONFIG_PM +static int pxa27x_keypad_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct pxa27x_keypad *keypad = platform_get_drvdata(pdev); + + clk_disable(keypad->clk); + return 0; +} + +static int pxa27x_keypad_resume(struct platform_device *pdev) +{ + struct pxa27x_keypad *keypad = platform_get_drvdata(pdev); + struct input_dev *input_dev = keypad->input_dev; + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) { + /* Enable unit clock */ + clk_enable(keypad->clk); + pxa27x_keypad_config(keypad); + } + + mutex_unlock(&input_dev->mutex); + + return 0; +} +#else +#define pxa27x_keypad_suspend NULL +#define pxa27x_keypad_resume NULL +#endif + +#define res_size(res) ((res)->end - (res)->start + 1) + +static int __devinit pxa27x_keypad_probe(struct platform_device *pdev) +{ + struct pxa27x_keypad *keypad; + struct input_dev *input_dev; + struct resource *res; + int irq, error; + + keypad = kzalloc(sizeof(struct pxa27x_keypad), GFP_KERNEL); + if (keypad == NULL) { + dev_err(&pdev->dev, "failed to allocate driver data\n"); + return -ENOMEM; + } + + keypad->pdata = pdev->dev.platform_data; + if (keypad->pdata == NULL) { + dev_err(&pdev->dev, "no platform data defined\n"); + error = -EINVAL; + goto failed_free; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get keypad irq\n"); + error = -ENXIO; + goto failed_free; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "failed to get I/O memory\n"); + error = -ENXIO; + goto failed_free; + } + + res = request_mem_region(res->start, res_size(res), pdev->name); + if (res == NULL) { + dev_err(&pdev->dev, "failed to request I/O memory\n"); + error = -EBUSY; + goto failed_free; + } + + keypad->mmio_base = ioremap(res->start, res_size(res)); + if (keypad->mmio_base == NULL) { + dev_err(&pdev->dev, "failed to remap I/O memory\n"); + error = -ENXIO; + goto failed_free_mem; + } + + keypad->clk = clk_get(&pdev->dev, "KBDCLK"); + if (IS_ERR(keypad->clk)) { + dev_err(&pdev->dev, "failed to get keypad clock\n"); + error = PTR_ERR(keypad->clk); + goto failed_free_io; + } + + /* Create and register the input driver. */ + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + error = -ENOMEM; + goto failed_put_clk; + } + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->open = pxa27x_keypad_open; + input_dev->close = pxa27x_keypad_close; + input_dev->dev.parent = &pdev->dev; + + keypad->input_dev = input_dev; + input_set_drvdata(input_dev, keypad); + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | + BIT_MASK(EV_REL); + + pxa27x_keypad_build_keycode(keypad); + platform_set_drvdata(pdev, keypad); + + error = request_irq(irq, pxa27x_keypad_irq_handler, IRQF_DISABLED, + pdev->name, keypad); + if (error) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + goto failed_free_dev; + } + + /* Register the input device */ + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, "failed to register input device\n"); + goto failed_free_irq; + } + + return 0; + +failed_free_irq: + free_irq(irq, pdev); + platform_set_drvdata(pdev, NULL); +failed_free_dev: + input_free_device(input_dev); +failed_put_clk: + clk_put(keypad->clk); +failed_free_io: + iounmap(keypad->mmio_base); +failed_free_mem: + release_mem_region(res->start, res_size(res)); +failed_free: + kfree(keypad); + return error; +} + +static int __devexit pxa27x_keypad_remove(struct platform_device *pdev) +{ + struct pxa27x_keypad *keypad = platform_get_drvdata(pdev); + struct resource *res; + + free_irq(platform_get_irq(pdev, 0), pdev); + + clk_disable(keypad->clk); + clk_put(keypad->clk); + + input_unregister_device(keypad->input_dev); + input_free_device(keypad->input_dev); + + iounmap(keypad->mmio_base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, res_size(res)); + + platform_set_drvdata(pdev, NULL); + kfree(keypad); + return 0; +} + +static struct platform_driver pxa27x_keypad_driver = { + .probe = pxa27x_keypad_probe, + .remove = __devexit_p(pxa27x_keypad_remove), + .suspend = pxa27x_keypad_suspend, + .resume = pxa27x_keypad_resume, + .driver = { + .name = "pxa27x-keypad", + }, +}; + +static int __init pxa27x_keypad_init(void) +{ + return platform_driver_register(&pxa27x_keypad_driver); +} + +static void __exit pxa27x_keypad_exit(void) +{ + platform_driver_unregister(&pxa27x_keypad_driver); +} + +module_init(pxa27x_keypad_init); +module_exit(pxa27x_keypad_exit); + +MODULE_DESCRIPTION("PXA27x Keypad Controller Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c new file mode 100644 index 0000000..3884d1e --- /dev/null +++ b/drivers/input/keyboard/tosakbd.c @@ -0,0 +1,415 @@ +/* + * Keyboard driver for Sharp Tosa models (SL-6000x) + * + * Copyright (c) 2005 Dirk Opfer + * Copyright (c) 2007 Dmitry Baryshkov + * + * Based on xtkbd.c/locomkbd.c/corgikbd.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/interrupt.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/tosa.h> + +#define KB_ROWMASK(r) (1 << (r)) +#define SCANCODE(r, c) (((r)<<4) + (c) + 1) +#define NR_SCANCODES SCANCODE(TOSA_KEY_SENSE_NUM - 1, TOSA_KEY_STROBE_NUM - 1) + 1 + +#define SCAN_INTERVAL (HZ/10) + +#define KB_DISCHARGE_DELAY 10 +#define KB_ACTIVATE_DELAY 10 + +static unsigned int tosakbd_keycode[NR_SCANCODES] = { +0, +0, KEY_W, 0, 0, 0, KEY_K, KEY_BACKSPACE, KEY_P, +0, 0, 0, 0, 0, 0, 0, 0, +KEY_Q, KEY_E, KEY_T, KEY_Y, 0, KEY_O, KEY_I, KEY_COMMA, +0, 0, 0, 0, 0, 0, 0, 0, +KEY_A, KEY_D, KEY_G, KEY_U, 0, KEY_L, KEY_ENTER, KEY_DOT, +0, 0, 0, 0, 0, 0, 0, 0, +KEY_Z, KEY_C, KEY_V, KEY_J, TOSA_KEY_ADDRESSBOOK, TOSA_KEY_CANCEL, TOSA_KEY_CENTER, TOSA_KEY_OK, +KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, 0, +KEY_S, KEY_R, KEY_B, KEY_N, TOSA_KEY_CALENDAR, TOSA_KEY_HOMEPAGE, KEY_LEFTCTRL, TOSA_KEY_LIGHT, +0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, +KEY_TAB, KEY_SLASH, KEY_H, KEY_M, TOSA_KEY_MENU, 0, KEY_UP, 0, +0, 0, TOSA_KEY_FN, 0, 0, 0, 0, 0, +KEY_X, KEY_F, KEY_SPACE, KEY_APOSTROPHE, TOSA_KEY_MAIL, KEY_LEFT, KEY_DOWN, KEY_RIGHT, +0, 0, 0, +}; + +struct tosakbd { + unsigned int keycode[ARRAY_SIZE(tosakbd_keycode)]; + struct input_dev *input; + + spinlock_t lock; /* protect kbd scanning */ + struct timer_list timer; +}; + + +/* Helper functions for reading the keyboard matrix + * Note: We should really be using pxa_gpio_mode to alter GPDR but it + * requires a function call per GPIO bit which is excessive + * when we need to access 12 bits at once, multiple times. + * These functions must be called within local_irq_save()/local_irq_restore() + * or similar. + */ +#define GET_ROWS_STATUS(c) ((GPLR2 & TOSA_GPIO_ALL_SENSE_BIT) >> TOSA_GPIO_ALL_SENSE_RSHIFT) + +static inline void tosakbd_discharge_all(void) +{ + /* STROBE All HiZ */ + GPCR1 = TOSA_GPIO_HIGH_STROBE_BIT; + GPDR1 &= ~TOSA_GPIO_HIGH_STROBE_BIT; + GPCR2 = TOSA_GPIO_LOW_STROBE_BIT; + GPDR2 &= ~TOSA_GPIO_LOW_STROBE_BIT; +} + +static inline void tosakbd_activate_all(void) +{ + /* STROBE ALL -> High */ + GPSR1 = TOSA_GPIO_HIGH_STROBE_BIT; + GPDR1 |= TOSA_GPIO_HIGH_STROBE_BIT; + GPSR2 = TOSA_GPIO_LOW_STROBE_BIT; + GPDR2 |= TOSA_GPIO_LOW_STROBE_BIT; + + udelay(KB_DISCHARGE_DELAY); + + /* STATE CLEAR */ + GEDR2 |= TOSA_GPIO_ALL_SENSE_BIT; +} + +static inline void tosakbd_activate_col(int col) +{ + if (col <= 5) { + /* STROBE col -> High, not col -> HiZ */ + GPSR1 = TOSA_GPIO_STROBE_BIT(col); + GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); + } else { + /* STROBE col -> High, not col -> HiZ */ + GPSR2 = TOSA_GPIO_STROBE_BIT(col); + GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); + } +} + +static inline void tosakbd_reset_col(int col) +{ + if (col <= 5) { + /* STROBE col -> Low */ + GPCR1 = TOSA_GPIO_STROBE_BIT(col); + /* STROBE col -> out, not col -> HiZ */ + GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); + } else { + /* STROBE col -> Low */ + GPCR2 = TOSA_GPIO_STROBE_BIT(col); + /* STROBE col -> out, not col -> HiZ */ + GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col); + } +} +/* + * The tosa keyboard only generates interrupts when a key is pressed. + * So when a key is pressed, we enable a timer. This timer scans the + * keyboard, and this is how we detect when the key is released. + */ + +/* Scan the hardware keyboard and push any changes up through the input layer */ +static void tosakbd_scankeyboard(struct platform_device *dev) +{ + struct tosakbd *tosakbd = platform_get_drvdata(dev); + unsigned int row, col, rowd; + unsigned long flags; + unsigned int num_pressed = 0; + + spin_lock_irqsave(&tosakbd->lock, flags); + + for (col = 0; col < TOSA_KEY_STROBE_NUM; col++) { + /* + * Discharge the output driver capacitatance + * in the keyboard matrix. (Yes it is significant..) + */ + tosakbd_discharge_all(); + udelay(KB_DISCHARGE_DELAY); + + tosakbd_activate_col(col); + udelay(KB_ACTIVATE_DELAY); + + rowd = GET_ROWS_STATUS(col); + + for (row = 0; row < TOSA_KEY_SENSE_NUM; row++) { + unsigned int scancode, pressed; + scancode = SCANCODE(row, col); + pressed = rowd & KB_ROWMASK(row); + + if (pressed && !tosakbd->keycode[scancode]) + dev_warn(&dev->dev, + "unhandled scancode: 0x%02x\n", + scancode); + + input_report_key(tosakbd->input, + tosakbd->keycode[scancode], + pressed); + if (pressed) + num_pressed++; + } + + tosakbd_reset_col(col); + } + + tosakbd_activate_all(); + + input_sync(tosakbd->input); + + /* if any keys are pressed, enable the timer */ + if (num_pressed) + mod_timer(&tosakbd->timer, jiffies + SCAN_INTERVAL); + + spin_unlock_irqrestore(&tosakbd->lock, flags); +} + +/* + * tosa keyboard interrupt handler. + */ +static irqreturn_t tosakbd_interrupt(int irq, void *__dev) +{ + struct platform_device *dev = __dev; + struct tosakbd *tosakbd = platform_get_drvdata(dev); + + if (!timer_pending(&tosakbd->timer)) { + /** wait chattering delay **/ + udelay(20); + tosakbd_scankeyboard(dev); + } + + return IRQ_HANDLED; +} + +/* + * tosa timer checking for released keys + */ +static void tosakbd_timer_callback(unsigned long __dev) +{ + struct platform_device *dev = (struct platform_device *)__dev; + tosakbd_scankeyboard(dev); +} + +#ifdef CONFIG_PM +static int tosakbd_suspend(struct platform_device *dev, pm_message_t state) +{ + struct tosakbd *tosakbd = platform_get_drvdata(dev); + + del_timer_sync(&tosakbd->timer); + + return 0; +} + +static int tosakbd_resume(struct platform_device *dev) +{ + tosakbd_scankeyboard(dev); + + return 0; +} +#else +#define tosakbd_suspend NULL +#define tosakbd_resume NULL +#endif + +static int __devinit tosakbd_probe(struct platform_device *pdev) { + + int i; + struct tosakbd *tosakbd; + struct input_dev *input_dev; + int error; + + tosakbd = kzalloc(sizeof(struct tosakbd), GFP_KERNEL); + if (!tosakbd) + return -ENOMEM; + + input_dev = input_allocate_device(); + if (!input_dev) { + kfree(tosakbd); + return -ENOMEM; + } + + platform_set_drvdata(pdev, tosakbd); + + spin_lock_init(&tosakbd->lock); + + /* Init Keyboard rescan timer */ + init_timer(&tosakbd->timer); + tosakbd->timer.function = tosakbd_timer_callback; + tosakbd->timer.data = (unsigned long) pdev; + + tosakbd->input = input_dev; + + input_set_drvdata(input_dev, tosakbd); + input_dev->name = "Tosa Keyboard"; + input_dev->phys = "tosakbd/input0"; + input_dev->dev.parent = &pdev->dev; + + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + input_dev->keycode = tosakbd->keycode; + input_dev->keycodesize = sizeof(unsigned int); + input_dev->keycodemax = ARRAY_SIZE(tosakbd_keycode); + + memcpy(tosakbd->keycode, tosakbd_keycode, sizeof(tosakbd_keycode)); + + for (i = 0; i < ARRAY_SIZE(tosakbd_keycode); i++) + __set_bit(tosakbd->keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); + + /* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */ + for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) { + int gpio = TOSA_GPIO_KEY_SENSE(i); + int irq; + error = gpio_request(gpio, "tosakbd"); + if (error < 0) { + printk(KERN_ERR "tosakbd: failed to request GPIO %d, " + " error %d\n", gpio, error); + goto fail; + } + + error = gpio_direction_input(TOSA_GPIO_KEY_SENSE(i)); + if (error < 0) { + printk(KERN_ERR "tosakbd: failed to configure input" + " direction for GPIO %d, error %d\n", + gpio, error); + gpio_free(gpio); + goto fail; + } + + irq = gpio_to_irq(gpio); + if (irq < 0) { + error = irq; + printk(KERN_ERR "gpio-keys: Unable to get irq number" + " for GPIO %d, error %d\n", + gpio, error); + gpio_free(gpio); + goto fail; + } + + error = request_irq(irq, tosakbd_interrupt, + IRQF_DISABLED | IRQF_TRIGGER_RISING, + "tosakbd", pdev); + + if (error) { + printk("tosakbd: Can't get IRQ: %d: error %d!\n", + irq, error); + gpio_free(gpio); + goto fail; + } + } + + /* Set Strobe lines as outputs - set high */ + for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) { + int gpio = TOSA_GPIO_KEY_STROBE(i); + error = gpio_request(gpio, "tosakbd"); + if (error < 0) { + printk(KERN_ERR "tosakbd: failed to request GPIO %d, " + " error %d\n", gpio, error); + goto fail2; + } + + error = gpio_direction_output(gpio, 1); + if (error < 0) { + printk(KERN_ERR "tosakbd: failed to configure input" + " direction for GPIO %d, error %d\n", + gpio, error); + gpio_free(gpio); + goto fail; + } + + } + + error = input_register_device(input_dev); + if (error) { + printk(KERN_ERR "tosakbd: Unable to register input device, " + "error: %d\n", error); + goto fail; + } + + printk(KERN_INFO "input: Tosa Keyboard Registered\n"); + + return 0; + +fail2: + while (--i >= 0) + gpio_free(TOSA_GPIO_KEY_STROBE(i)); + + i = TOSA_KEY_SENSE_NUM; +fail: + while (--i >= 0) { + free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), pdev); + gpio_free(TOSA_GPIO_KEY_SENSE(i)); + } + + platform_set_drvdata(pdev, NULL); + input_free_device(input_dev); + kfree(tosakbd); + + return error; +} + +static int __devexit tosakbd_remove(struct platform_device *dev) { + + int i; + struct tosakbd *tosakbd = platform_get_drvdata(dev); + + for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) + gpio_free(TOSA_GPIO_KEY_STROBE(i)); + + for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) { + free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), dev); + gpio_free(TOSA_GPIO_KEY_SENSE(i)); + } + + del_timer_sync(&tosakbd->timer); + + input_unregister_device(tosakbd->input); + + kfree(tosakbd); + + return 0; +} + +static struct platform_driver tosakbd_driver = { + .probe = tosakbd_probe, + .remove = __devexit_p(tosakbd_remove), + .suspend = tosakbd_suspend, + .resume = tosakbd_resume, + .driver = { + .name = "tosa-keyboard", + }, +}; + +static int __devinit tosakbd_init(void) +{ + return platform_driver_register(&tosakbd_driver); +} + +static void __exit tosakbd_exit(void) +{ + platform_driver_unregister(&tosakbd_driver); +} + +module_init(tosakbd_init); +module_exit(tosakbd_exit); + +MODULE_AUTHOR("Dirk Opfer <Dirk@Opfer-Online.de>"); +MODULE_DESCRIPTION("Tosa Keyboard Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 8f5c7b9..8b10d9f 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -40,6 +40,20 @@ config INPUT_M68K_BEEP tristate "M68k Beeper support" depends on M68K +config INPUT_APANEL + tristate "Fujitsu Lifebook Application Panel buttons" + depends on X86 + select I2C_I801 + select INPUT_POLLDEV + select CHECK_SIGNATURE + help + Say Y here for support of the Application Panel buttons, used on + Fujitsu Lifebook. These are attached to the mainboard through + an SMBus interface managed by the I2C Intel ICH (i801) driver. + + To compile this driver as a module, choose M here: the module will + be called apanel. + config INPUT_IXP4XX_BEEPER tristate "IXP4XX Beeper support" depends on ARCH_IXP4XX diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 3585b50..ebd39f2 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -18,3 +18,4 @@ obj-$(CONFIG_INPUT_POWERMATE) += powermate.o obj-$(CONFIG_INPUT_YEALINK) += yealink.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_UINPUT) += uinput.o +obj-$(CONFIG_INPUT_APANEL) += apanel.o diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c new file mode 100644 index 0000000..9531d8c --- /dev/null +++ b/drivers/input/misc/apanel.c @@ -0,0 +1,378 @@ +/* + * Fujitsu Lifebook Application Panel button drive + * + * Copyright (C) 2007 Stephen Hemminger <shemminger@linux-foundation.org> + * Copyright (C) 2001-2003 Jochen Eisinger <jochen@penguin-breeder.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * Many Fujitsu Lifebook laptops have a small panel of buttons that are + * accessible via the i2c/smbus interface. This driver polls those + * buttons and generates input events. + * + * For more details see: + * http://apanel.sourceforge.net/tech.php + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/input-polldev.h> +#include <linux/i2c.h> +#include <linux/workqueue.h> +#include <linux/leds.h> + +#define APANEL_NAME "Fujitsu Application Panel" +#define APANEL_VERSION "1.3.1" +#define APANEL "apanel" + +/* How often we poll keys - msecs */ +#define POLL_INTERVAL_DEFAULT 1000 + +/* Magic constants in BIOS that tell about buttons */ +enum apanel_devid { + APANEL_DEV_NONE = 0, + APANEL_DEV_APPBTN = 1, + APANEL_DEV_CDBTN = 2, + APANEL_DEV_LCD = 3, + APANEL_DEV_LED = 4, + + APANEL_DEV_MAX, +}; + +enum apanel_chip { + CHIP_NONE = 0, + CHIP_OZ992C = 1, + CHIP_OZ163T = 2, + CHIP_OZ711M3 = 4, +}; + +/* Result of BIOS snooping/probing -- what features are supported */ +static enum apanel_chip device_chip[APANEL_DEV_MAX]; + +#define MAX_PANEL_KEYS 12 + +struct apanel { + struct input_polled_dev *ipdev; + struct i2c_client client; + unsigned short keymap[MAX_PANEL_KEYS]; + u16 nkeys; + u16 led_bits; + struct work_struct led_work; + struct led_classdev mail_led; +}; + + +static int apanel_probe(struct i2c_adapter *, int, int); + +/* for now, we only support one address */ +static unsigned short normal_i2c[] = {0, I2C_CLIENT_END}; +static unsigned short ignore = I2C_CLIENT_END; +static struct i2c_client_address_data addr_data = { + .normal_i2c = normal_i2c, + .probe = &ignore, + .ignore = &ignore, +}; + +static void report_key(struct input_dev *input, unsigned keycode) +{ + pr_debug(APANEL ": report key %#x\n", keycode); + input_report_key(input, keycode, 1); + input_sync(input); + + input_report_key(input, keycode, 0); + input_sync(input); +} + +/* Poll for key changes + * + * Read Application keys via SMI + * A (0x4), B (0x8), Internet (0x2), Email (0x1). + * + * CD keys: + * Forward (0x100), Rewind (0x200), Stop (0x400), Pause (0x800) + */ +static void apanel_poll(struct input_polled_dev *ipdev) +{ + struct apanel *ap = ipdev->private; + struct input_dev *idev = ipdev->input; + u8 cmd = device_chip[APANEL_DEV_APPBTN] == CHIP_OZ992C ? 0 : 8; + s32 data; + int i; + + data = i2c_smbus_read_word_data(&ap->client, cmd); + if (data < 0) + return; /* ignore errors (due to ACPI??) */ + + /* write back to clear latch */ + i2c_smbus_write_word_data(&ap->client, cmd, 0); + + if (!data) + return; + + dev_dbg(&idev->dev, APANEL ": data %#x\n", data); + for (i = 0; i < idev->keycodemax; i++) + if ((1u << i) & data) + report_key(idev, ap->keymap[i]); +} + +/* Track state changes of LED */ +static void led_update(struct work_struct *work) +{ + struct apanel *ap = container_of(work, struct apanel, led_work); + + i2c_smbus_write_word_data(&ap->client, 0x10, ap->led_bits); +} + +static void mail_led_set(struct led_classdev *led, + enum led_brightness value) +{ + struct apanel *ap = container_of(led, struct apanel, mail_led); + + if (value != LED_OFF) + ap->led_bits |= 0x8000; + else + ap->led_bits &= ~0x8000; + + schedule_work(&ap->led_work); +} + +static int apanel_detach_client(struct i2c_client *client) +{ + struct apanel *ap = i2c_get_clientdata(client); + + if (device_chip[APANEL_DEV_LED] != CHIP_NONE) + led_classdev_unregister(&ap->mail_led); + + input_unregister_polled_device(ap->ipdev); + i2c_detach_client(&ap->client); + input_free_polled_device(ap->ipdev); + + return 0; +} + +/* Function is invoked for every i2c adapter. */ +static int apanel_attach_adapter(struct i2c_adapter *adap) +{ + dev_dbg(&adap->dev, APANEL ": attach adapter id=%d\n", adap->id); + + /* Our device is connected only to i801 on laptop */ + if (adap->id != I2C_HW_SMBUS_I801) + return -ENODEV; + + return i2c_probe(adap, &addr_data, apanel_probe); +} + +static void apanel_shutdown(struct i2c_client *client) +{ + apanel_detach_client(client); +} + +static struct i2c_driver apanel_driver = { + .driver = { + .name = APANEL, + }, + .attach_adapter = &apanel_attach_adapter, + .detach_client = &apanel_detach_client, + .shutdown = &apanel_shutdown, +}; + +static struct apanel apanel = { + .client = { + .driver = &apanel_driver, + .name = APANEL, + }, + .keymap = { + [0] = KEY_MAIL, + [1] = KEY_WWW, + [2] = KEY_PROG2, + [3] = KEY_PROG1, + + [8] = KEY_FORWARD, + [9] = KEY_REWIND, + [10] = KEY_STOPCD, + [11] = KEY_PLAYPAUSE, + + }, + .mail_led = { + .name = "mail:blue", + .brightness_set = mail_led_set, + }, +}; + +/* NB: Only one panel on the i2c. */ +static int apanel_probe(struct i2c_adapter *bus, int address, int kind) +{ + struct apanel *ap; + struct input_polled_dev *ipdev; + struct input_dev *idev; + u8 cmd = device_chip[APANEL_DEV_APPBTN] == CHIP_OZ992C ? 0 : 8; + int i, err = -ENOMEM; + + dev_dbg(&bus->dev, APANEL ": probe adapter %p addr %d kind %d\n", + bus, address, kind); + + ap = &apanel; + + ipdev = input_allocate_polled_device(); + if (!ipdev) + goto out1; + + ap->ipdev = ipdev; + ap->client.adapter = bus; + ap->client.addr = address; + + i2c_set_clientdata(&ap->client, ap); + + err = i2c_attach_client(&ap->client); + if (err) + goto out2; + + err = i2c_smbus_write_word_data(&ap->client, cmd, 0); + if (err) { + dev_warn(&ap->client.dev, APANEL ": smbus write error %d\n", + err); + goto out3; + } + + ipdev->poll = apanel_poll; + ipdev->poll_interval = POLL_INTERVAL_DEFAULT; + ipdev->private = ap; + + idev = ipdev->input; + idev->name = APANEL_NAME " buttons"; + idev->phys = "apanel/input0"; + idev->id.bustype = BUS_HOST; + idev->dev.parent = &ap->client.dev; + + set_bit(EV_KEY, idev->evbit); + + idev->keycode = ap->keymap; + idev->keycodesize = sizeof(ap->keymap[0]); + idev->keycodemax = (device_chip[APANEL_DEV_CDBTN] != CHIP_NONE) ? 12 : 4; + + for (i = 0; i < idev->keycodemax; i++) + if (ap->keymap[i]) + set_bit(ap->keymap[i], idev->keybit); + + err = input_register_polled_device(ipdev); + if (err) + goto out3; + + INIT_WORK(&ap->led_work, led_update); + if (device_chip[APANEL_DEV_LED] != CHIP_NONE) { + err = led_classdev_register(&ap->client.dev, &ap->mail_led); + if (err) + goto out4; + } + + return 0; +out4: + input_unregister_polled_device(ipdev); +out3: + i2c_detach_client(&ap->client); +out2: + input_free_polled_device(ipdev); +out1: + return err; +} + +/* Scan the system ROM for the signature "FJKEYINF" */ +static __init const void __iomem *bios_signature(const void __iomem *bios) +{ + ssize_t offset; + const unsigned char signature[] = "FJKEYINF"; + + for (offset = 0; offset < 0x10000; offset += 0x10) { + if (check_signature(bios + offset, signature, + sizeof(signature)-1)) + return bios + offset; + } + pr_notice(APANEL ": Fujitsu BIOS signature '%s' not found...\n", + signature); + return NULL; +} + +static int __init apanel_init(void) +{ + void __iomem *bios; + const void __iomem *p; + u8 devno; + int found = 0; + + bios = ioremap(0xF0000, 0x10000); /* Can't fail */ + + p = bios_signature(bios); + if (!p) { + iounmap(bios); + return -ENODEV; + } + + /* just use the first address */ + p += 8; + normal_i2c[0] = readb(p+3) >> 1; + + for ( ; (devno = readb(p)) & 0x7f; p += 4) { + unsigned char method, slave, chip; + + method = readb(p + 1); + chip = readb(p + 2); + slave = readb(p + 3) >> 1; + + if (slave != normal_i2c[0]) { + pr_notice(APANEL ": only one SMBus slave " + "address supported, skiping device...\n"); + continue; + } + + /* translate alternative device numbers */ + switch (devno) { + case 6: + devno = APANEL_DEV_APPBTN; + break; + case 7: + devno = APANEL_DEV_LED; + break; + } + + if (devno >= APANEL_DEV_MAX) + pr_notice(APANEL ": unknown device %u found\n", devno); + else if (device_chip[devno] != CHIP_NONE) + pr_warning(APANEL ": duplicate entry for devno %u\n", devno); + + else if (method != 1 && method != 2 && method != 4) { + pr_notice(APANEL ": unknown method %u for devno %u\n", + method, devno); + } else { + device_chip[devno] = (enum apanel_chip) chip; + ++found; + } + } + iounmap(bios); + + if (found == 0) { + pr_info(APANEL ": no input devices reported by BIOS\n"); + return -EIO; + } + + return i2c_add_driver(&apanel_driver); +} +module_init(apanel_init); + +static void __exit apanel_cleanup(void) +{ + i2c_del_driver(&apanel_driver); +} +module_exit(apanel_cleanup); + +MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>"); +MODULE_DESCRIPTION(APANEL_NAME " driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(APANEL_VERSION); + +MODULE_ALIAS("dmi:*:svnFUJITSU:pnLifeBook*:pvr*:rvnFUJITSU:*"); +MODULE_ALIAS("dmi:*:svnFUJITSU:pnLifebook*:pvr*:rvnFUJITSU:*"); diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c index 3a79374..f3b86c2 100644 --- a/drivers/input/misc/ati_remote.c +++ b/drivers/input/misc/ati_remote.c @@ -90,7 +90,6 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/usb/input.h> #include <linux/wait.h> #include <linux/jiffies.h> diff --git a/drivers/input/misc/atlas_btns.c b/drivers/input/misc/atlas_btns.c index 4e3ad65..1b87191 100644 --- a/drivers/input/misc/atlas_btns.c +++ b/drivers/input/misc/atlas_btns.c @@ -29,9 +29,10 @@ #include <asm/uaccess.h> #include <acpi/acpi_drivers.h> -#define ACPI_ATLAS_NAME "Atlas ACPI" -#define ACPI_ATLAS_CLASS "Atlas" +#define ACPI_ATLAS_NAME "Atlas ACPI" +#define ACPI_ATLAS_CLASS "Atlas" +static unsigned short atlas_keymap[16]; static struct input_dev *input_dev; /* button handling code */ @@ -50,12 +51,15 @@ static acpi_status acpi_atlas_button_handler(u32 function, void *handler_context, void *region_context) { acpi_status status; - int keycode; if (function == ACPI_WRITE) { - keycode = KEY_F1 + (address & 0x0F); - input_report_key(input_dev, keycode, !(address & 0x10)); + int code = address & 0x0f; + int key_down = !(address & 0x10); + + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, atlas_keymap[code], key_down); input_sync(input_dev); + status = 0; } else { printk(KERN_WARNING "atlas: shrugged on unexpected function" @@ -70,6 +74,7 @@ static acpi_status acpi_atlas_button_handler(u32 function, static int atlas_acpi_button_add(struct acpi_device *device) { acpi_status status; + int i; int err; input_dev = input_allocate_device(); @@ -81,17 +86,19 @@ static int atlas_acpi_button_add(struct acpi_device *device) input_dev->name = "Atlas ACPI button driver"; input_dev->phys = "ASIM0000/atlas/input0"; input_dev->id.bustype = BUS_HOST; - input_dev->evbit[BIT_WORD(EV_KEY)] = BIT_MASK(EV_KEY); - - set_bit(KEY_F1, input_dev->keybit); - set_bit(KEY_F2, input_dev->keybit); - set_bit(KEY_F3, input_dev->keybit); - set_bit(KEY_F4, input_dev->keybit); - set_bit(KEY_F5, input_dev->keybit); - set_bit(KEY_F6, input_dev->keybit); - set_bit(KEY_F7, input_dev->keybit); - set_bit(KEY_F8, input_dev->keybit); - set_bit(KEY_F9, input_dev->keybit); + input_dev->keycode = atlas_keymap; + input_dev->keycodesize = sizeof(unsigned short); + input_dev->keycodemax = ARRAY_SIZE(atlas_keymap); + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + __set_bit(EV_KEY, input_dev->evbit); + for (i = 0; i < ARRAY_SIZE(atlas_keymap); i++) { + if (i < 9) { + atlas_keymap[i] = KEY_F1 + i; + __set_bit(KEY_F1 + i, input_dev->keybit); + } else + atlas_keymap[i] = KEY_RESERVED; + } err = input_register_device(input_dev); if (err) { diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c index 1aef97e..4833b1a 100644 --- a/drivers/input/misc/cobalt_btns.c +++ b/drivers/input/misc/cobalt_btns.c @@ -27,55 +27,48 @@ #define BUTTONS_COUNT_THRESHOLD 3 #define BUTTONS_STATUS_MASK 0xfe000000 +static const unsigned short cobalt_map[] = { + KEY_RESERVED, + KEY_RESTART, + KEY_LEFT, + KEY_UP, + KEY_DOWN, + KEY_RIGHT, + KEY_ENTER, + KEY_SELECT +}; + struct buttons_dev { struct input_polled_dev *poll_dev; + unsigned short keymap[ARRAY_SIZE(cobalt_map)]; + int count[ARRAY_SIZE(cobalt_map)]; void __iomem *reg; }; -struct buttons_map { - uint32_t mask; - int keycode; - int count; -}; - -static struct buttons_map buttons_map[] = { - { 0x02000000, KEY_RESTART, }, - { 0x04000000, KEY_LEFT, }, - { 0x08000000, KEY_UP, }, - { 0x10000000, KEY_DOWN, }, - { 0x20000000, KEY_RIGHT, }, - { 0x40000000, KEY_ENTER, }, - { 0x80000000, KEY_SELECT, }, -}; - static void handle_buttons(struct input_polled_dev *dev) { - struct buttons_map *button = buttons_map; struct buttons_dev *bdev = dev->private; struct input_dev *input = dev->input; uint32_t status; int i; - status = readl(bdev->reg); - status = ~status & BUTTONS_STATUS_MASK; + status = ~readl(bdev->reg) >> 24; - for (i = 0; i < ARRAY_SIZE(buttons_map); i++) { - if (status & button->mask) { - button->count++; + for (i = 0; i < ARRAY_SIZE(bdev->keymap); i++) { + if (status & (1UL << i)) { + if (++bdev->count[i] == BUTTONS_COUNT_THRESHOLD) { + input_event(input, EV_MSC, MSC_SCAN, i); + input_report_key(input, bdev->keymap[i], 1); + input_sync(input); + } } else { - if (button->count >= BUTTONS_COUNT_THRESHOLD) { - input_report_key(input, button->keycode, 0); + if (bdev->count[i] >= BUTTONS_COUNT_THRESHOLD) { + input_event(input, EV_MSC, MSC_SCAN, i); + input_report_key(input, bdev->keymap[i], 0); input_sync(input); } - button->count = 0; - } - - if (button->count == BUTTONS_COUNT_THRESHOLD) { - input_report_key(input, button->keycode, 1); - input_sync(input); + bdev->count[i] = 0; } - - button++; } } @@ -94,6 +87,8 @@ static int __devinit cobalt_buttons_probe(struct platform_device *pdev) goto err_free_mem; } + memcpy(bdev->keymap, cobalt_map, sizeof(bdev->keymap)); + poll_dev->private = bdev; poll_dev->poll = handle_buttons; poll_dev->poll_interval = BUTTONS_POLL_INTERVAL; @@ -104,11 +99,15 @@ static int __devinit cobalt_buttons_probe(struct platform_device *pdev) input->id.bustype = BUS_HOST; input->cdev.dev = &pdev->dev; - input->evbit[0] = BIT_MASK(EV_KEY); - for (i = 0; i < ARRAY_SIZE(buttons_map); i++) { - set_bit(buttons_map[i].keycode, input->keybit); - buttons_map[i].count = 0; - } + input->keycode = pdev->keymap; + input->keycodemax = ARRAY_SIZE(pdev->keymap); + input->keycodesize = sizeof(unsigned short); + + input_set_capability(input, EV_MSC, MSC_SCAN); + __set_bit(EV_KEY, input->evbit); + for (i = 0; i < ARRAY_SIZE(buttons_map); i++) + __set_bit(input->keycode[i], input->keybit); + __clear_bit(KEY_RESERVED, input->keybit); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c index fd74347..952938a 100644 --- a/drivers/input/misc/keyspan_remote.c +++ b/drivers/input/misc/keyspan_remote.c @@ -16,7 +16,6 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/usb/input.h> #define DRIVER_VERSION "v0.1" @@ -46,53 +45,12 @@ MODULE_PARM_DESC(debug, "Enable extra debug messages and information"); #define RECV_SIZE 8 /* The UIA-11 type have a 8 byte limit. */ -/* table of devices that work with this driver */ -static struct usb_device_id keyspan_table[] = { - { USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) }, - { } /* Terminating entry */ -}; - -/* Structure to store all the real stuff that a remote sends to us. */ -struct keyspan_message { - u16 system; - u8 button; - u8 toggle; -}; - -/* Structure used for all the bit testing magic needed to be done. */ -struct bit_tester { - u32 tester; - int len; - int pos; - int bits_left; - u8 buffer[32]; -}; - -/* Structure to hold all of our driver specific stuff */ -struct usb_keyspan { - char name[128]; - char phys[64]; - struct usb_device* udev; - struct input_dev *input; - struct usb_interface* interface; - struct usb_endpoint_descriptor* in_endpoint; - struct urb* irq_urb; - int open; - dma_addr_t in_dma; - unsigned char* in_buffer; - - /* variables used to parse messages from remote. */ - struct bit_tester data; - int stage; - int toggle; -}; - /* * Table that maps the 31 possible keycodes to input keys. * Currently there are 15 and 17 button models so RESERVED codes * are blank areas in the mapping. */ -static const int keyspan_key_table[] = { +static const unsigned short keyspan_key_table[] = { KEY_RESERVED, /* 0 is just a place holder. */ KEY_RESERVED, KEY_STOP, @@ -127,6 +85,48 @@ static const int keyspan_key_table[] = { KEY_MENU }; +/* table of devices that work with this driver */ +static struct usb_device_id keyspan_table[] = { + { USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) }, + { } /* Terminating entry */ +}; + +/* Structure to store all the real stuff that a remote sends to us. */ +struct keyspan_message { + u16 system; + u8 button; + u8 toggle; +}; + +/* Structure used for all the bit testing magic needed to be done. */ +struct bit_tester { + u32 tester; + int len; + int pos; + int bits_left; + u8 buffer[32]; +}; + +/* Structure to hold all of our driver specific stuff */ +struct usb_keyspan { + char name[128]; + char phys[64]; + unsigned short keymap[ARRAY_SIZE(keyspan_key_table)]; + struct usb_device *udev; + struct input_dev *input; + struct usb_interface *interface; + struct usb_endpoint_descriptor *in_endpoint; + struct urb* irq_urb; + int open; + dma_addr_t in_dma; + unsigned char *in_buffer; + + /* variables used to parse messages from remote. */ + struct bit_tester data; + int stage; + int toggle; +}; + static struct usb_driver keyspan_driver; /* @@ -173,6 +173,15 @@ static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) return 0; } +static void keyspan_report_button(struct usb_keyspan *remote, int button, int press) +{ + struct input_dev *input = remote->input; + + input_event(input, EV_MSC, MSC_SCAN, button); + input_report_key(input, remote->keymap[button], press); + input_sync(input); +} + /* * Routine that handles all the logic needed to parse out the message from the remote. */ @@ -311,9 +320,8 @@ static void keyspan_check_data(struct usb_keyspan *remote) __FUNCTION__, message.system, message.button, message.toggle); if (message.toggle != remote->toggle) { - input_report_key(remote->input, keyspan_key_table[message.button], 1); - input_report_key(remote->input, keyspan_key_table[message.button], 0); - input_sync(remote->input); + keyspan_report_button(remote, message.button, 1); + keyspan_report_button(remote, message.button, 0); remote->toggle = message.toggle; } @@ -491,16 +499,21 @@ static int keyspan_probe(struct usb_interface *interface, const struct usb_devic usb_make_path(udev, remote->phys, sizeof(remote->phys)); strlcat(remote->phys, "/input0", sizeof(remote->phys)); + memcpy(remote->keymap, keyspan_key_table, sizeof(remote->keymap)); input_dev->name = remote->name; input_dev->phys = remote->phys; usb_to_input_id(udev, &input_dev->id); input_dev->dev.parent = &interface->dev; + input_dev->keycode = remote->keymap; + input_dev->keycodesize = sizeof(unsigned short); + input_dev->keycodemax = ARRAY_SIZE(remote->keymap); - input_dev->evbit[0] = BIT_MASK(EV_KEY); /* We will only report KEY events. */ + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + __set_bit(EV_KEY, input_dev->evbit); for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++) - if (keyspan_key_table[i] != KEY_RESERVED) - set_bit(keyspan_key_table[i], input_dev->keybit); + __set_bit(keyspan_key_table[i], input_dev->keybit); + __clear_bit(KEY_RESERVED, input_dev->keybit); input_set_drvdata(input_dev, remote); @@ -508,12 +521,14 @@ static int keyspan_probe(struct usb_interface *interface, const struct usb_devic input_dev->close = keyspan_close; /* - * Initialize the URB to access the device. The urb gets sent to the device in keyspan_open() + * Initialize the URB to access the device. + * The urb gets sent to the device in keyspan_open() */ usb_fill_int_urb(remote->irq_urb, - remote->udev, usb_rcvintpipe(remote->udev, remote->in_endpoint->bEndpointAddress), + remote->udev, + usb_rcvintpipe(remote->udev, endpoint->bEndpointAddress), remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote, - remote->in_endpoint->bInterval); + endpoint->bInterval); remote->irq_urb->transfer_dma = remote->in_dma; remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; diff --git a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c index 26ec095..06c35fc 100644 --- a/drivers/input/mouse/inport.c +++ b/drivers/input/mouse/inport.c @@ -35,7 +35,6 @@ */ #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/ioport.h> #include <linux/init.h> #include <linux/interrupt.h> diff --git a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c index 37e7c75..9ea8955 100644 --- a/drivers/input/mouse/logibm.c +++ b/drivers/input/mouse/logibm.c @@ -36,7 +36,6 @@ */ #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/delay.h> #include <linux/ioport.h> #include <linux/init.h> diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index b862825..f5a6be1 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -13,7 +13,6 @@ #include <linux/delay.h> #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/input.h> diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c index 9ab5b5e..26b845fc 100644 --- a/drivers/input/mouse/trackpoint.c +++ b/drivers/input/mouse/trackpoint.c @@ -11,7 +11,6 @@ #include <linux/delay.h> #include <linux/serio.h> #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/input.h> #include <linux/libps2.h> #include <linux/proc_fs.h> diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index be83516c..bbbe5e8 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -16,7 +16,6 @@ #include <linux/slab.h> #include <linux/poll.h> #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/init.h> #include <linux/input.h> #include <linux/random.h> @@ -1033,7 +1032,7 @@ static const struct input_device_id mousedev_ids[] = { .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT | INPUT_DEVICE_ID_MATCH_ABSBIT, - .evbit = { BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_SYN) }, + .evbit = { BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) }, .keybit = { [BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) }, .absbit = { BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) }, }, /* Mouse-like device with absolute X and Y but ordinary diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index c5e68dc..662e844 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -63,7 +63,7 @@ static inline void i8042_write_command(int val) outb(val, I8042_COMMAND_REG); } -#if defined(__i386__) +#if defined(__i386__) || defined(__x86_64__) #include <linux/dmi.h> @@ -186,6 +186,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { }, }, { + .ident = "Fujitsu-Siemens Amilo Pro 2010", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro V2010"), + }, + }, + { /* * No data is coming from the touchscreen unless KBC * is in legacy mode. @@ -277,6 +284,57 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { #endif +#ifdef CONFIG_X86 + +#include <linux/dmi.h> + +/* + * Some Wistron based laptops need us to explicitly enable the 'Dritek + * keyboard extension' to make their extra keys start generating scancodes. + * Originally, this was just confined to older laptops, but a few Acer laptops + * have turned up in 2007 that also need this again. + */ +static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = { + { + .ident = "Acer Aspire 5630", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5630"), + }, + }, + { + .ident = "Acer Aspire 5650", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5650"), + }, + }, + { + .ident = "Acer Aspire 5680", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5680"), + }, + }, + { + .ident = "Acer Aspire 9110", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 9110"), + }, + }, + { + .ident = "Acer TravelMate 2490", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"), + }, + }, + { } +}; + +#endif /* CONFIG_X86 */ + #ifdef CONFIG_PNP #include <linux/pnp.h> @@ -512,7 +570,7 @@ static int __init i8042_platform_init(void) i8042_reset = 1; #endif -#if defined(__i386__) +#if defined(__i386__) || defined(__x86_64__) if (dmi_check_system(i8042_dmi_noloop_table)) i8042_noloop = 1; @@ -520,6 +578,11 @@ static int __init i8042_platform_init(void) i8042_nomux = 1; #endif +#ifdef CONFIG_X86 + if (dmi_check_system(i8042_dmi_dritek_table)) + i8042_dritek = 1; +#endif /* CONFIG_X86 */ + return retval; } diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 1a0cea3..2763394 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -12,7 +12,6 @@ #include <linux/delay.h> #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/init.h> @@ -64,6 +63,12 @@ static unsigned int i8042_blink_frequency = 500; module_param_named(panicblink, i8042_blink_frequency, uint, 0600); MODULE_PARM_DESC(panicblink, "Frequency with which keyboard LEDs should blink when kernel panics"); +#ifdef CONFIG_X86 +static unsigned int i8042_dritek; +module_param_named(dritek, i8042_dritek, bool, 0); +MODULE_PARM_DESC(dritek, "Force enable the Dritek keyboard extension"); +#endif + #ifdef CONFIG_PNP static int i8042_nopnp; module_param_named(nopnp, i8042_nopnp, bool, 0); @@ -280,7 +285,14 @@ static void i8042_stop(struct serio *serio) struct i8042_port *port = serio->port_data; port->exists = 0; - synchronize_sched(); + + /* + * We synchronize with both AUX and KBD IRQs because there is + * a (very unlikely) chance that AUX IRQ is raised for KBD port + * and vice versa. + */ + synchronize_irq(I8042_AUX_IRQ); + synchronize_irq(I8042_KBD_IRQ); port->serio = NULL; } @@ -1139,6 +1151,7 @@ static int __devinit i8042_setup_kbd(void) static int __devinit i8042_probe(struct platform_device *dev) { int error; + char param; error = i8042_controller_selftest(); if (error) @@ -1159,7 +1172,14 @@ static int __devinit i8042_probe(struct platform_device *dev) if (error) goto out_fail; } - +#ifdef CONFIG_X86 + if (i8042_dritek) { + param = 0x90; + error = i8042_command(¶m, 0x1059); + if (error) + goto out_fail; + } +#endif /* * Ok, everything is ready, let's register all serio ports */ diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c index 10d9d74..b819239 100644 --- a/drivers/input/serio/libps2.c +++ b/drivers/input/serio/libps2.c @@ -13,7 +13,6 @@ #include <linux/delay.h> #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/input.h> diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index fd9c5d5..58934a40 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -116,6 +116,7 @@ struct ads7846 { // FIXME remove "irq_disabled" unsigned irq_disabled:1; /* P: lock */ unsigned disabled:1; + unsigned is_suspended:1; int (*filter)(void *data, int data_idx, int *val); void *filter_data; @@ -203,7 +204,7 @@ static void ads7846_disable(struct ads7846 *ts); static int device_suspended(struct device *dev) { struct ads7846 *ts = dev_get_drvdata(dev); - return dev->power.power_state.event != PM_EVENT_ON || ts->disabled; + return ts->is_suspended || ts->disabled; } static int ads7846_read12_ser(struct device *dev, unsigned command) @@ -794,7 +795,7 @@ static int ads7846_suspend(struct spi_device *spi, pm_message_t message) spin_lock_irq(&ts->lock); - spi->dev.power.power_state = message; + ts->is_suspended = 1; ads7846_disable(ts); spin_unlock_irq(&ts->lock); @@ -809,7 +810,7 @@ static int ads7846_resume(struct spi_device *spi) spin_lock_irq(&ts->lock); - spi->dev.power.power_state = PMSG_ON; + ts->is_suspended = 0; ads7846_enable(ts); spin_unlock_irq(&ts->lock); @@ -871,7 +872,6 @@ static int __devinit ads7846_probe(struct spi_device *spi) } dev_set_drvdata(&spi->dev, ts); - spi->dev.power.power_state = PMSG_ON; ts->spi = spi; ts->input = input_dev; diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c index 80a6588..efd3aeb 100644 --- a/drivers/input/touchscreen/mk712.c +++ b/drivers/input/touchscreen/mk712.c @@ -36,7 +36,6 @@ */ #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/errno.h> diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index 986a836..607f993 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -15,7 +15,6 @@ */ #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/init.h> #include <linux/completion.h> #include <linux/delay.h> diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c index 3e93f80..719b17c 100644 --- a/drivers/media/video/usbvideo/konicawc.c +++ b/drivers/media/video/usbvideo/konicawc.c @@ -241,8 +241,6 @@ static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev input_dev->evbit[0] = BIT_MASK(EV_KEY); input_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0); - input_dev->private = cam; - error = input_register_device(cam->input); if (error) { warn("Failed to register camera's input device, err: %d\n", diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c index 5e7b795..a2acba0 100644 --- a/drivers/media/video/usbvideo/quickcam_messenger.c +++ b/drivers/media/video/usbvideo/quickcam_messenger.c @@ -105,8 +105,6 @@ static void qcm_register_input(struct qcm *cam, struct usb_device *dev) input_dev->evbit[0] = BIT_MASK(EV_KEY); input_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0); - input_dev->private = cam; - error = input_register_device(cam->input); if (error) { warn("Failed to register camera's input device, err: %d\n", diff --git a/include/asm-arm/arch-pxa/pxa27x_keyboard.h b/include/asm-arm/arch-pxa/pxa27x_keyboard.h deleted file mode 100644 index 3aaff92..0000000 --- a/include/asm-arm/arch-pxa/pxa27x_keyboard.h +++ /dev/null @@ -1,13 +0,0 @@ -#define PXAKBD_MAXROW 8 -#define PXAKBD_MAXCOL 8 - -struct pxa27x_keyboard_platform_data { - int nr_rows, nr_cols; - int keycodes[PXAKBD_MAXROW][PXAKBD_MAXCOL]; - int gpio_modes[PXAKBD_MAXROW + PXAKBD_MAXCOL]; - -#ifdef CONFIG_PM - u32 reg_kpc; - u32 reg_kprec; -#endif -}; diff --git a/include/asm-arm/arch-pxa/pxa27x_keypad.h b/include/asm-arm/arch-pxa/pxa27x_keypad.h new file mode 100644 index 0000000..644f760 --- /dev/null +++ b/include/asm-arm/arch-pxa/pxa27x_keypad.h @@ -0,0 +1,56 @@ +#ifndef __ASM_ARCH_PXA27x_KEYPAD_H +#define __ASM_ARCH_PXA27x_KEYPAD_H + +#include <linux/input.h> + +#define MAX_MATRIX_KEY_ROWS (8) +#define MAX_MATRIX_KEY_COLS (8) + +/* pxa3xx keypad platform specific parameters + * + * NOTE: + * 1. direct_key_num indicates the number of keys in the direct keypad + * _plus_ the number of rotary-encoder sensor inputs, this can be + * left as 0 if only rotary encoders are enabled, the driver will + * automatically calculate this + * + * 2. direct_key_map is the key code map for the direct keys, if rotary + * encoder(s) are enabled, direct key 0/1(2/3) will be ignored + * + * 3. rotary can be either interpreted as a relative input event (e.g. + * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT) + * + * 4. matrix key and direct key will use the same debounce_interval by + * default, which should be sufficient in most cases + */ +struct pxa27x_keypad_platform_data { + + /* code map for the matrix keys */ + unsigned int matrix_key_rows; + unsigned int matrix_key_cols; + unsigned int *matrix_key_map; + int matrix_key_map_size; + + /* direct keys */ + int direct_key_num; + unsigned int direct_key_map[8]; + + /* rotary encoders 0 */ + int enable_rotary0; + int rotary0_rel_code; + int rotary0_up_key; + int rotary0_down_key; + + /* rotary encoders 1 */ + int enable_rotary1; + int rotary1_rel_code; + int rotary1_up_key; + int rotary1_down_key; + + /* key debounce interval */ + unsigned int debounce_interval; +}; + +#define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val)) + +#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h index c3364a2..c05e4fa 100644 --- a/include/asm-arm/arch-pxa/tosa.h +++ b/include/asm-arm/arch-pxa/tosa.h @@ -163,4 +163,34 @@ extern struct platform_device tosascoop_jc_device; extern struct platform_device tosascoop_device; + +#define TOSA_KEY_SYNC KEY_102ND /* ??? */ + + +#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES +#define TOSA_KEY_RECORD KEY_YEN +#define TOSA_KEY_ADDRESSBOOK KEY_KATAKANA +#define TOSA_KEY_CANCEL KEY_ESC +#define TOSA_KEY_CENTER KEY_HIRAGANA +#define TOSA_KEY_OK KEY_HENKAN +#define TOSA_KEY_CALENDAR KEY_KATAKANAHIRAGANA +#define TOSA_KEY_HOMEPAGE KEY_HANGEUL +#define TOSA_KEY_LIGHT KEY_MUHENKAN +#define TOSA_KEY_MENU KEY_HANJA +#define TOSA_KEY_FN KEY_RIGHTALT +#define TOSA_KEY_MAIL KEY_ZENKAKUHANKAKU +#else +#define TOSA_KEY_RECORD KEY_RECORD +#define TOSA_KEY_ADDRESSBOOK KEY_ADDRESSBOOK +#define TOSA_KEY_CANCEL KEY_CANCEL +#define TOSA_KEY_CENTER KEY_SELECT /* ??? */ +#define TOSA_KEY_OK KEY_OK +#define TOSA_KEY_CALENDAR KEY_CALENDAR +#define TOSA_KEY_HOMEPAGE KEY_HOMEPAGE +#define TOSA_KEY_LIGHT KEY_KBDILLUMTOGGLE +#define TOSA_KEY_MENU KEY_MENU +#define TOSA_KEY_FN KEY_FN +#define TOSA_KEY_MAIL KEY_MAIL +#endif + #endif /* _ASM_ARCH_TOSA_H_ */ diff --git a/include/linux/input.h b/include/linux/input.h index 056a17a..1bdc39a 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1020,7 +1020,6 @@ struct ff_effect { * @going_away: marks devices that are in a middle of unregistering and * causes input_open_device*() fail with -ENODEV. * @dev: driver model's view of this device - * @cdev: union for struct device pointer * @h_list: list of input handles associated with the device. When * accessing the list dev->mutex must be held * @node: used to place the device onto input_dev_list @@ -1085,9 +1084,6 @@ struct input_dev { int going_away; struct device dev; - union { /* temporarily so while we switching to struct device */ - struct device *dev; - } cdev; struct list_head h_list; struct list_head node; @@ -1311,6 +1307,9 @@ static inline void input_set_abs_params(struct input_dev *dev, int axis, int min dev->absbit[BIT_WORD(axis)] |= BIT_MASK(axis); } +int input_get_keycode(struct input_dev *dev, int scancode, int *keycode); +int input_set_keycode(struct input_dev *dev, int scancode, int keycode); + extern struct class input_class; /** |
