diff options
75 files changed, 0 insertions, 3912 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 0be245d..f374cca 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -50,23 +50,6 @@ config AR7 Support for the Texas Instruments AR7 System-on-a-Chip family: TNETD7100, 7200 and 7300. -config BASLER_EXCITE - bool "Basler eXcite smart camera" - select CEVT_R4K - select CSRC_R4K - select DMA_COHERENT - select HW_HAS_PCI - select IRQ_CPU - select IRQ_CPU_RM7K - select IRQ_CPU_RM9K - select MIPS_RM9122 - select SYS_HAS_CPU_RM9000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - help - The eXcite is a smart camera platform manufactured by - Basler Vision Technologies AG. - config BCM47XX bool "BCM47XX based boards" select CEVT_R4K @@ -701,7 +684,6 @@ config CAVIUM_OCTEON_REFERENCE_BOARD endchoice source "arch/mips/alchemy/Kconfig" -source "arch/mips/basler/excite/Kconfig" source "arch/mips/bcm63xx/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" diff --git a/arch/mips/Makefile b/arch/mips/Makefile index d2c39fd..1893efd 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -369,13 +369,6 @@ cflags-$(CONFIG_PMC_YOSEMITE) += -I$(srctree)/arch/mips/include/asm/mach-yosemit load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000 # -# Basler eXcite -# -core-$(CONFIG_BASLER_EXCITE) += arch/mips/basler/excite/ -cflags-$(CONFIG_BASLER_EXCITE) += -I$(srctree)/arch/mips/include/asm/mach-excite -load-$(CONFIG_BASLER_EXCITE) += 0x80100000 - -# # LASAT platforms # core-$(CONFIG_LASAT) += arch/mips/lasat/ diff --git a/arch/mips/basler/excite/Kconfig b/arch/mips/basler/excite/Kconfig deleted file mode 100644 index ba50607..0000000 --- a/arch/mips/basler/excite/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -config BASLER_EXCITE_PROTOTYPE - bool "Support for pre-release units" - depends on BASLER_EXCITE - default n - help - Pre-series (prototype) units are different from later ones in - some ways. Select this option if you have one of these. Please - note that a kernel built with this option selected will not be - able to run on normal units. diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile deleted file mode 100644 index cff29cf..0000000 --- a/arch/mips/basler/excite/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for Basler eXcite -# - -obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \ - excite_device.o excite_procfs.o - -obj-m += excite_iodev.o diff --git a/arch/mips/basler/excite/excite_device.c b/arch/mips/basler/excite/excite_device.c deleted file mode 100644 index e00bc2d..0000000 --- a/arch/mips/basler/excite/excite_device.c +++ /dev/null @@ -1,403 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ioport.h> -#include <linux/err.h> -#include <linux/jiffies.h> -#include <linux/sched.h> -#include <asm/types.h> -#include <asm/rm9k-ocd.h> - -#include <excite.h> -#include <rm9k_eth.h> -#include <rm9k_wdt.h> -#include <rm9k_xicap.h> -#include <excite_nandflash.h> - -#include "excite_iodev.h" - -#define RM9K_GE_UNIT 0 -#define XICAP_UNIT 0 -#define NAND_UNIT 0 - -#define DLL_TIMEOUT 3 /* seconds */ - - -#define RINIT(__start__, __end__, __name__, __parent__) { \ - .name = __name__ "_0", \ - .start = (__start__), \ - .end = (__end__), \ - .flags = 0, \ - .parent = (__parent__) \ -} - -#define RINIT_IRQ(__irq__, __name__) { \ - .name = __name__ "_0", \ - .start = (__irq__), \ - .end = (__irq__), \ - .flags = IORESOURCE_IRQ, \ - .parent = NULL \ -} - - - -enum { - slice_xicap, - slice_eth -}; - - - -static struct resource - excite_ctr_resource __maybe_unused = { - .name = "GPI counters", - .start = 0, - .end = 5, - .flags = 0, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_gpislice_resource __maybe_unused = { - .name = "GPI slices", - .start = 0, - .end = 1, - .flags = 0, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_mdio_channel_resource __maybe_unused = { - .name = "MDIO channels", - .start = 0, - .end = 1, - .flags = 0, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_fifomem_resource __maybe_unused = { - .name = "FIFO memory", - .start = 0, - .end = 767, - .flags = 0, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_scram_resource __maybe_unused = { - .name = "Scratch RAM", - .start = EXCITE_PHYS_SCRAM, - .end = EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1, - .flags = IORESOURCE_MEM, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_fpga_resource __maybe_unused = { - .name = "System FPGA", - .start = EXCITE_PHYS_FPGA, - .end = EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1, - .flags = IORESOURCE_MEM, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_nand_resource __maybe_unused = { - .name = "NAND flash control", - .start = EXCITE_PHYS_NAND, - .end = EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1, - .flags = IORESOURCE_MEM, - .parent = NULL, - .sibling = NULL, - .child = NULL - }, - excite_titan_resource __maybe_unused = { - .name = "TITAN registers", - .start = EXCITE_PHYS_TITAN, - .end = EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1, - .flags = IORESOURCE_MEM, - .parent = NULL, - .sibling = NULL, - .child = NULL - }; - - - -static void adjust_resources(struct resource *res, unsigned int n) -{ - struct resource *p; - const unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM - | IORESOURCE_IRQ | IORESOURCE_DMA; - - for (p = res; p < res + n; p++) { - const struct resource * const parent = p->parent; - if (parent) { - p->start += parent->start; - p->end += parent->start; - p->flags = parent->flags & mask; - } - } -} - - - -#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) -static struct resource xicap_rsrc[] = { - RINIT(0x4840, 0x486f, XICAP_RESOURCE_FIFO_RX, &excite_titan_resource), - RINIT(0x4940, 0x494b, XICAP_RESOURCE_FIFO_TX, &excite_titan_resource), - RINIT(0x5040, 0x5127, XICAP_RESOURCE_XDMA, &excite_titan_resource), - RINIT(0x1000, 0x112f, XICAP_RESOURCE_PKTPROC, &excite_titan_resource), - RINIT(0x1100, 0x110f, XICAP_RESOURCE_PKT_STREAM, &excite_fpga_resource), - RINIT(0x0800, 0x0bff, XICAP_RESOURCE_DMADESC, &excite_scram_resource), - RINIT(slice_xicap, slice_xicap, XICAP_RESOURCE_GPI_SLICE, &excite_gpislice_resource), - RINIT(0x0100, 0x02ff, XICAP_RESOURCE_FIFO_BLK, &excite_fifomem_resource), - RINIT_IRQ(TITAN_IRQ, XICAP_RESOURCE_IRQ) -}; - -static struct platform_device xicap_pdev = { - .name = XICAP_NAME, - .id = XICAP_UNIT, - .num_resources = ARRAY_SIZE(xicap_rsrc), - .resource = xicap_rsrc -}; - -/* - * Create a platform device for the GPI port that receives the - * image data from the embedded camera. - */ -static int __init xicap_devinit(void) -{ - unsigned long tend; - u32 reg; - int retval; - - adjust_resources(xicap_rsrc, ARRAY_SIZE(xicap_rsrc)); - - /* Power up the slice and configure it. */ - reg = titan_readl(CPTC1R); - reg &= ~(0x11100 << slice_xicap); - titan_writel(reg, CPTC1R); - - /* Enable slice & DLL. */ - reg= titan_readl(CPRR); - reg &= ~(0x00030003 << (slice_xicap * 2)); - titan_writel(reg, CPRR); - - /* Wait for DLLs to lock */ - tend = jiffies + DLL_TIMEOUT * HZ; - while (time_before(jiffies, tend)) { - if (!(~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4)))) - break; - yield(); - } - - if (~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))) { - printk(KERN_ERR "%s: DLL not locked after %u seconds\n", - xicap_pdev.name, DLL_TIMEOUT); - retval = -ETIME; - } else { - /* Register platform device */ - retval = platform_device_register(&xicap_pdev); - } - - return retval; -} - -device_initcall(xicap_devinit); -#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */ - - - -#if defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) -static struct resource wdt_rsrc[] = { - RINIT(0, 0, WDT_RESOURCE_COUNTER, &excite_ctr_resource), - RINIT(0x0084, 0x008f, WDT_RESOURCE_REGS, &excite_titan_resource), - RINIT_IRQ(TITAN_IRQ, WDT_RESOURCE_IRQ) -}; - -static struct platform_device wdt_pdev = { - .name = WDT_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(wdt_rsrc), - .resource = wdt_rsrc -}; - -/* - * Create a platform device for the GPI port that receives the - * image data from the embedded camera. - */ -static int __init wdt_devinit(void) -{ - adjust_resources(wdt_rsrc, ARRAY_SIZE(wdt_rsrc)); - return platform_device_register(&wdt_pdev); -} - -device_initcall(wdt_devinit); -#endif /* defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) */ - - - -static struct resource excite_nandflash_rsrc[] = { - RINIT(0x2000, 0x201f, EXCITE_NANDFLASH_RESOURCE_REGS, &excite_nand_resource) -}; - -static struct platform_device excite_nandflash_pdev = { - .name = "excite_nand", - .id = NAND_UNIT, - .num_resources = ARRAY_SIZE(excite_nandflash_rsrc), - .resource = excite_nandflash_rsrc -}; - -/* - * Create a platform device for the access to the nand-flash - * port - */ -static int __init excite_nandflash_devinit(void) -{ - adjust_resources(excite_nandflash_rsrc, ARRAY_SIZE(excite_nandflash_rsrc)); - - /* nothing to be done here */ - - /* Register platform device */ - return platform_device_register(&excite_nandflash_pdev); -} - -device_initcall(excite_nandflash_devinit); - - - -static struct resource iodev_rsrc[] = { - RINIT_IRQ(FPGA1_IRQ, IODEV_RESOURCE_IRQ) -}; - -static struct platform_device io_pdev = { - .name = IODEV_NAME, - .id = -1, - .num_resources = ARRAY_SIZE(iodev_rsrc), - .resource = iodev_rsrc -}; - -/* - * Create a platform device for the external I/O ports. - */ -static int __init io_devinit(void) -{ - adjust_resources(iodev_rsrc, ARRAY_SIZE(iodev_rsrc)); - return platform_device_register(&io_pdev); -} - -device_initcall(io_devinit); - - - - -#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) -static struct resource rm9k_ge_rsrc[] = { - RINIT(0x2200, 0x27ff, RM9K_GE_RESOURCE_MAC, &excite_titan_resource), - RINIT(0x1800, 0x1fff, RM9K_GE_RESOURCE_MSTAT, &excite_titan_resource), - RINIT(0x2000, 0x212f, RM9K_GE_RESOURCE_PKTPROC, &excite_titan_resource), - RINIT(0x5140, 0x5227, RM9K_GE_RESOURCE_XDMA, &excite_titan_resource), - RINIT(0x4870, 0x489f, RM9K_GE_RESOURCE_FIFO_RX, &excite_titan_resource), - RINIT(0x494c, 0x4957, RM9K_GE_RESOURCE_FIFO_TX, &excite_titan_resource), - RINIT(0x0000, 0x007f, RM9K_GE_RESOURCE_FIFOMEM_RX, &excite_fifomem_resource), - RINIT(0x0080, 0x00ff, RM9K_GE_RESOURCE_FIFOMEM_TX, &excite_fifomem_resource), - RINIT(0x0180, 0x019f, RM9K_GE_RESOURCE_PHY, &excite_titan_resource), - RINIT(0x0000, 0x03ff, RM9K_GE_RESOURCE_DMADESC_RX, &excite_scram_resource), - RINIT(0x0400, 0x07ff, RM9K_GE_RESOURCE_DMADESC_TX, &excite_scram_resource), - RINIT(slice_eth, slice_eth, RM9K_GE_RESOURCE_GPI_SLICE, &excite_gpislice_resource), - RINIT(0, 0, RM9K_GE_RESOURCE_MDIO_CHANNEL, &excite_mdio_channel_resource), - RINIT_IRQ(TITAN_IRQ, RM9K_GE_RESOURCE_IRQ_MAIN), - RINIT_IRQ(PHY_IRQ, RM9K_GE_RESOURCE_IRQ_PHY) -}; - -static struct platform_device rm9k_ge_pdev = { - .name = RM9K_GE_NAME, - .id = RM9K_GE_UNIT, - .num_resources = ARRAY_SIZE(rm9k_ge_rsrc), - .resource = rm9k_ge_rsrc -}; - - - -/* - * Create a platform device for the Ethernet port. - */ -static int __init rm9k_ge_devinit(void) -{ - u32 reg; - - adjust_resources(rm9k_ge_rsrc, ARRAY_SIZE(rm9k_ge_rsrc)); - - /* Power up the slice and configure it. */ - reg = titan_readl(CPTC1R); - reg &= ~(0x11000 << slice_eth); - reg |= 0x100 << slice_eth; - titan_writel(reg, CPTC1R); - - /* Take the MAC out of reset, reset the DLLs. */ - reg = titan_readl(CPRR); - reg &= ~(0x00030000 << (slice_eth * 2)); - reg |= 0x3 << (slice_eth * 2); - titan_writel(reg, CPRR); - - return platform_device_register(&rm9k_ge_pdev); -} - -device_initcall(rm9k_ge_devinit); -#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */ - - - -static int __init excite_setup_devs(void) -{ - int res; - u32 reg; - - /* Enable xdma and fifo interrupts */ - reg = titan_readl(0x0050); - titan_writel(reg | 0x18000000, 0x0050); - - res = request_resource(&iomem_resource, &excite_titan_resource); - if (res) - return res; - res = request_resource(&iomem_resource, &excite_scram_resource); - if (res) - return res; - res = request_resource(&iomem_resource, &excite_fpga_resource); - if (res) - return res; - res = request_resource(&iomem_resource, &excite_nand_resource); - if (res) - return res; - excite_fpga_resource.flags = excite_fpga_resource.parent->flags & - ( IORESOURCE_IO | IORESOURCE_MEM - | IORESOURCE_IRQ | IORESOURCE_DMA); - excite_nand_resource.flags = excite_nand_resource.parent->flags & - ( IORESOURCE_IO | IORESOURCE_MEM - | IORESOURCE_IRQ | IORESOURCE_DMA); - - return 0; -} - -arch_initcall(excite_setup_devs); - diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c deleted file mode 100644 index 733b242..0000000 --- a/arch/mips/basler/excite/excite_iodev.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Copyright (C) 2005 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/compiler.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/wait.h> -#include <linux/poll.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/miscdevice.h> -#include <linux/smp_lock.h> - -#include "excite_iodev.h" - - - -static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int); -static int __init iodev_probe(struct platform_device *); -static int __devexit iodev_remove(struct platform_device *); -static int iodev_open(struct inode *, struct file *); -static int iodev_release(struct inode *, struct file *); -static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *); -static unsigned int iodev_poll(struct file *, struct poll_table_struct *); -static irqreturn_t iodev_irqhdl(int, void *); - - - -static const char iodev_name[] = "iodev"; -static unsigned int iodev_irq; -static DECLARE_WAIT_QUEUE_HEAD(wq); - - - -static const struct file_operations fops = -{ - .owner = THIS_MODULE, - .open = iodev_open, - .release = iodev_release, - .read = iodev_read, - .poll = iodev_poll -}; - -static struct miscdevice miscdev = -{ - .minor = MISC_DYNAMIC_MINOR, - .name = iodev_name, - .fops = &fops -}; - -static struct platform_driver iodev_driver = { - .driver = { - .name = iodev_name, - .owner = THIS_MODULE, - }, - .probe = iodev_probe, - .remove = __devexit_p(iodev_remove), -}; - - - -static const struct resource * -iodev_get_resource(struct platform_device *pdv, const char *name, - unsigned int type) -{ - char buf[80]; - if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf) - return NULL; - return platform_get_resource_byname(pdv, type, buf); -} - - - -/* No hotplugging on the platform bus - use __init */ -static int __init iodev_probe(struct platform_device *dev) -{ - const struct resource * const ri = - iodev_get_resource(dev, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ); - - if (unlikely(!ri)) - return -ENXIO; - - iodev_irq = ri->start; - return misc_register(&miscdev); -} - - - -static int __devexit iodev_remove(struct platform_device *dev) -{ - return misc_deregister(&miscdev); -} - -static int iodev_open(struct inode *i, struct file *f) -{ - int ret; - - ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED, - iodev_name, &miscdev); - - return ret; -} - -static int iodev_release(struct inode *i, struct file *f) -{ - free_irq(iodev_irq, &miscdev); - return 0; -} - - - - -static ssize_t -iodev_read(struct file *f, char __user *d, size_t s, loff_t *o) -{ - ssize_t ret; - DEFINE_WAIT(w); - - prepare_to_wait(&wq, &w, TASK_INTERRUPTIBLE); - if (!signal_pending(current)) - schedule(); - ret = signal_pending(current) ? -ERESTARTSYS : 0; - finish_wait(&wq, &w); - return ret; -} - - -static unsigned int iodev_poll(struct file *f, struct poll_table_struct *p) -{ - poll_wait(f, &wq, p); - return POLLOUT | POLLWRNORM; -} - -static irqreturn_t iodev_irqhdl(int irq, void *ctxt) -{ - wake_up(&wq); - - return IRQ_HANDLED; -} - -static int __init iodev_init_module(void) -{ - return platform_driver_register(&iodev_driver); -} - - - -static void __exit iodev_cleanup_module(void) -{ - platform_driver_unregister(&iodev_driver); -} - -module_init(iodev_init_module); -module_exit(iodev_cleanup_module); - - - -MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>"); -MODULE_DESCRIPTION("Basler eXcite i/o interrupt handler"); -MODULE_VERSION("0.0"); -MODULE_LICENSE("GPL"); diff --git a/arch/mips/basler/excite/excite_iodev.h b/arch/mips/basler/excite/excite_iodev.h deleted file mode 100644 index cbfbb5d..0000000 --- a/arch/mips/basler/excite/excite_iodev.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __EXCITE_IODEV_H__ -#define __EXCITE_IODEV_H__ - -/* Device name */ -#define IODEV_NAME "iodev" - -/* Resource names */ -#define IODEV_RESOURCE_IRQ "excite_iodev_irq" - -#endif /* __EXCITE_IODEV_H__ */ diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c deleted file mode 100644 index 934e0a6..0000000 --- a/arch/mips/basler/excite/excite_irq.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Copyright (C) by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslereb.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/bitops.h> -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/irq_cpu.h> -#include <asm/mipsregs.h> -#include <asm/system.h> -#include <asm/rm9k-ocd.h> - -#include <excite.h> - -extern asmlinkage void excite_handle_int(void); - -/* - * Initialize the interrupt handler - */ -void __init arch_init_irq(void) -{ - mips_cpu_irq_init(); - rm7k_cpu_irq_init(); - rm9k_cpu_irq_init(); -} - -asmlinkage void plat_irq_dispatch(void) -{ - const u32 - interrupts = read_c0_cause() >> 8, - mask = ((read_c0_status() >> 8) & 0x000000ff) | - (read_c0_intcontrol() & 0x0000ff00), - pending = interrupts & mask; - u32 msgintflags, msgintmask, msgint; - - /* process timer interrupt */ - if (pending & (1 << TIMER_IRQ)) { - do_IRQ(TIMER_IRQ); - return; - } - - /* Process PCI interrupts */ -#if USB_IRQ < 10 - msgintflags = ocd_readl(INTP0Status0 + (USB_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (USB_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (USB_MSGINT % 0x20)); - if ((pending & (1 << USB_IRQ)) && msgint) { -#else - if (pending & (1 << USB_IRQ)) { -#endif - do_IRQ(USB_IRQ); - return; - } - - /* Process TITAN interrupts */ - msgintflags = ocd_readl(INTP0Status0 + (TITAN_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (TITAN_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20)); - if ((pending & (1 << TITAN_IRQ)) && msgint) { - ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10)); - do_IRQ(TITAN_IRQ); - return; - } - - /* Process FPGA line #0 interrupts */ - msgintflags = ocd_readl(INTP0Status0 + (FPGA0_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (FPGA0_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (FPGA0_MSGINT % 0x20)); - if ((pending & (1 << FPGA0_IRQ)) && msgint) { - do_IRQ(FPGA0_IRQ); - return; - } - - /* Process FPGA line #1 interrupts */ - msgintflags = ocd_readl(INTP0Status0 + (FPGA1_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (FPGA1_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (FPGA1_MSGINT % 0x20)); - if ((pending & (1 << FPGA1_IRQ)) && msgint) { - do_IRQ(FPGA1_IRQ); - return; - } - - /* Process PHY interrupts */ - msgintflags = ocd_readl(INTP0Status0 + (PHY_MSGINT / 0x20 * 0x10)); - msgintmask = ocd_readl(INTP0Mask0 + (PHY_MSGINT / 0x20 * 0x10)); - msgint = msgintflags & msgintmask & (0x1 << (PHY_MSGINT % 0x20)); - if ((pending & (1 << PHY_IRQ)) && msgint) { - do_IRQ(PHY_IRQ); - return; - } - - /* Process spurious interrupts */ - spurious_interrupt(); -} diff --git a/arch/mips/basler/excite/excite_procfs.c b/arch/mips/basler/excite/excite_procfs.c deleted file mode 100644 index 08923e6..0000000 --- a/arch/mips/basler/excite/excite_procfs.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Copyright (C) 2004, 2005 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * - * Procfs support for Basler eXcite - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/module.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/stat.h> -#include <asm/page.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/rm9k-ocd.h> - -#include <excite.h> - -static int excite_unit_id_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%06x", unit_id); - return 0; -} - -static int excite_unit_id_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, excite_unit_id_proc_show, NULL); -} - -static const struct file_operations excite_unit_id_proc_fops = { - .owner = THIS_MODULE, - .open = excite_unit_id_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int -excite_bootrom_read(char *page, char **start, off_t off, int count, - int *eof, void *data) -{ - void __iomem * src; - - if (off >= EXCITE_SIZE_BOOTROM) { - *eof = 1; - return 0; - } - - if ((off + count) > EXCITE_SIZE_BOOTROM) - count = EXCITE_SIZE_BOOTROM - off; - - src = ioremap(EXCITE_PHYS_BOOTROM + off, count); - if (src) { - memcpy_fromio(page, src, count); - iounmap(src); - *start = page; - } else { - count = -ENOMEM; - } - - return count; -} - -void excite_procfs_init(void) -{ - /* Create & populate /proc/excite */ - struct proc_dir_entry * const pdir = proc_mkdir("excite", NULL); - if (pdir) { - struct proc_dir_entry * e; - - e = proc_create("unit_id", S_IRUGO, pdir, - &excite_unit_id_proc_fops); - if (e) e->size = 6; - - e = create_proc_read_entry("bootrom", S_IRUGO, pdir, - excite_bootrom_read, NULL); - if (e) e->size = EXCITE_SIZE_BOOTROM; - } -} diff --git a/arch/mips/basler/excite/excite_prom.c b/arch/mips/basler/excite/excite_prom.c deleted file mode 100644 index 68d8bc5..0000000 --- a/arch/mips/basler/excite/excite_prom.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright (C) 2004, 2005 by Thomas Koeller (thomas.koeller@baslerweb.com) - * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and - * Manish Lachwani. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/smp.h> -#include <linux/module.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/reboot.h> -#include <asm/system.h> -#include <asm/bootinfo.h> -#include <asm/string.h> - -#include <excite.h> - -/* This struct is used by Redboot to pass arguments to the kernel */ -typedef struct -{ - char *name; - char *val; -} t_env_var; - -struct parmblock { - t_env_var memsize; - t_env_var modetty0; - t_env_var ethaddr; - t_env_var env_end; - char *argv[2]; - char text[0]; -}; - -static unsigned int prom_argc; -static const char ** prom_argv; -static const t_env_var * prom_env; - -static void prom_halt(void) __attribute__((noreturn)); -static void prom_exit(void) __attribute__((noreturn)); - - - -const char *get_system_type(void) -{ - return "Basler eXcite"; -} - -/* - * Halt the system - */ -static void prom_halt(void) -{ - printk(KERN_NOTICE "\n** System halted.\n"); - while (1) - asm volatile ( - "\t.set\tmips3\n" - "\twait\n" - "\t.set\tmips0\n" - ); -} - -/* - * Reset the CPU and re-enter Redboot - */ -static void prom_exit(void) -{ - unsigned int i; - volatile unsigned char * const flg = - (volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_DPR); - - /* Clear the watchdog reset flag, set the reboot flag */ - *flg &= ~0x01; - *flg |= 0x80; - - for (i = 0; i < 10; i++) { - *(volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_SYSCTL) = 0x02; - iob(); - mdelay(1000); - } - - printk(KERN_NOTICE "Reset failed\n"); - prom_halt(); -} - -static const char __init *prom_getenv(char *name) -{ - const t_env_var * p; - for (p = prom_env; p->name != NULL; p++) - if(strcmp(name, p->name) == 0) - break; - return p->val; -} - -/* - * Init routine which accepts the variables from Redboot - */ -void __init prom_init(void) -{ - const struct parmblock * const pb = (struct parmblock *) fw_arg2; - - prom_argc = fw_arg0; - prom_argv = (const char **) fw_arg1; - prom_env = &pb->memsize; - - /* Callbacks for halt, restart */ - _machine_restart = (void (*)(char *)) prom_exit; - _machine_halt = prom_halt; - -#ifdef CONFIG_32BIT - /* copy command line */ - strcpy(arcs_cmdline, prom_argv[1]); - memsize = simple_strtol(prom_getenv("memsize"), NULL, 16); - strcpy(modetty, prom_getenv("modetty0")); -#endif /* CONFIG_32BIT */ - -#ifdef CONFIG_64BIT -# error 64 bit support not implemented -#endif /* CONFIG_64BIT */ -} - -/* This is called from free_initmem(), so we need to provide it */ -void __init prom_free_prom_memory(void) -{ - /* Nothing to do */ -} diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c deleted file mode 100644 index d66b3b8..0000000 --- a/arch/mips/basler/excite/excite_setup.c +++ /dev/null @@ -1,302 +0,0 @@ -/* - * Copyright (C) 2004, 2005 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and - * Manish Lachwani. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/tty.h> -#include <linux/serial_core.h> -#include <linux/serial.h> -#include <linux/serial_8250.h> -#include <linux/ioport.h> -#include <linux/spinlock.h> -#include <asm/bootinfo.h> -#include <asm/mipsregs.h> -#include <asm/pgtable-32.h> -#include <asm/io.h> -#include <asm/time.h> -#include <asm/rm9k-ocd.h> - -#include <excite.h> - -#define TITAN_UART_CLK 25000000 - -#if 1 -/* normal serial port assignment */ -#define REGBASE_SER0 0x0208 -#define REGBASE_SER1 0x0238 -#define MASK_SER0 0x1 -#define MASK_SER1 0x2 -#else -/* serial ports swapped */ -#define REGBASE_SER0 0x0238 -#define REGBASE_SER1 0x0208 -#define MASK_SER0 0x2 -#define MASK_SER1 0x1 -#endif - -unsigned long memsize; -char modetty[30]; -unsigned int titan_irq = TITAN_IRQ; -static void __iomem * ctl_regs; -u32 unit_id; - -volatile void __iomem * const ocd_base = (void *) (EXCITE_ADDR_OCD); -volatile void __iomem * const titan_base = (void *) (EXCITE_ADDR_TITAN); - -/* Protect access to shared GPI registers */ -DEFINE_SPINLOCK(titan_lock); -int titan_irqflags; - - -/* - * The eXcite platform uses the alternate timer interrupt - * - * Fixme: At the time of this writing cevt-r4k.c doesn't yet know about how - * to handle the alternate timer interrupt of the RM9000. - */ -void __init plat_time_init(void) -{ - const u32 modebit5 = ocd_readl(0x00e4); - unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2; - unsigned int div = ((modebit5 >> 16) & 0x1f) + 2; - - if (div == 33) - div = 1; - mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2; -} - -static int __init excite_init_console(void) -{ -#if defined(CONFIG_SERIAL_8250) - static __initdata char serr[] = - KERN_ERR "Serial port #%u setup failed\n"; - struct uart_port up; - - /* Take the DUART out of reset */ - titan_writel(0x00ff1cff, CPRR); - -#if (CONFIG_SERIAL_8250_NR_UARTS > 1) - /* Enable both ports */ - titan_writel(MASK_SER0 | MASK_SER1, UACFG); -#else - /* Enable port #0 only */ - titan_writel(MASK_SER0, UACFG); -#endif - - /* - * Set up serial port #0. Do not use autodetection; the result is - * not what we want. - */ - memset(&up, 0, sizeof(up)); - up.membase = (char *) titan_addr(REGBASE_SER0); - up.irq = TITAN_IRQ; - up.uartclk = TITAN_UART_CLK; - up.regshift = 0; - up.iotype = UPIO_RM9000; - up.type = PORT_RM9000; - up.flags = UPF_SHARE_IRQ; - up.line = 0; - if (early_serial_setup(&up)) - printk(serr, up.line); - -#if CONFIG_SERIAL_8250_NR_UARTS > 1 - /* And now for port #1. */ - up.membase = (char *) titan_addr(REGBASE_SER1); - up.line = 1; - if (early_serial_setup(&up)) - printk(serr, up.line); -#endif /* CONFIG_SERIAL_8250_NR_UARTS > 1 */ -#else - /* Leave the DUART in reset */ - titan_writel(0x00ff3cff, CPRR); -#endif /* defined(CONFIG_SERIAL_8250) */ - - return 0; -} - -static int __init excite_platform_init(void) -{ - unsigned int i; - unsigned char buf[3]; - u8 reg; - void __iomem * dpr; - - /* BIU buffer allocations */ - ocd_writel(8, CPURSLMT); /* CPU */ - titan_writel(4, CPGRWL); /* GPI / Ethernet */ - - /* Map control registers located in FPGA */ - ctl_regs = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_SYSCTL, 16); - if (!ctl_regs) - panic("eXcite: failed to map platform control registers\n"); - memcpy_fromio(buf, ctl_regs + 2, ARRAY_SIZE(buf)); - unit_id = buf[0] | (buf[1] << 8) | (buf[2] << 16); - - /* Clear the reboot flag */ - dpr = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_DPR, 1); - reg = __raw_readb(dpr); - __raw_writeb(reg & 0x7f, dpr); - iounmap(dpr); - - /* Interrupt controller setup */ - for (i = INTP0Status0; i < INTP0Status0 + 0x80; i += 0x10) { - ocd_writel(0x00000000, i + 0x04); - ocd_writel(0xffffffff, i + 0x0c); - } - ocd_writel(0x2, NMICONFIG); - - ocd_writel(0x1 << (TITAN_MSGINT % 0x20), - INTP0Mask0 + (0x10 * (TITAN_MSGINT / 0x20))); - ocd_writel((0x1 << (FPGA0_MSGINT % 0x20)) - | ocd_readl(INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))), - INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))); - ocd_writel((0x1 << (FPGA1_MSGINT % 0x20)) - | ocd_readl(INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))), - INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))); - ocd_writel((0x1 << (PHY_MSGINT % 0x20)) - | ocd_readl(INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))), - INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))); -#if USB_IRQ < 10 - ocd_writel((0x1 << (USB_MSGINT % 0x20)) - | ocd_readl(INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))), - INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))); -#endif - /* Enable the packet FIFO, XDMA and XDMA arbiter */ - titan_writel(0x00ff18ff, CPRR); - - /* - * Set up the PADMUX. Power down all ethernet slices, - * they will be powered up and configured at device startup. - */ - titan_writel(0x00878206, CPTC1R); - titan_writel(0x00001100, CPTC0R); /* latch PADMUX, enable WCIMODE */ - - /* Reset and enable the FIFO block */ - titan_writel(0x00000001, SDRXFCIE); - titan_writel(0x00000001, SDTXFCIE); - titan_writel(0x00000100, SDRXFCIE); - titan_writel(0x00000000, SDTXFCIE); - - /* - * Initialize the common interrupt shared by all components of - * the GPI/Ethernet subsystem. - */ - titan_writel((EXCITE_PHYS_OCD >> 12), CPCFG0); - titan_writel(TITAN_MSGINT, CPCFG1); - - /* - * XDMA configuration. - * In order for the XDMA to be sharable among multiple drivers, - * the setup must be done here in the platform. The reason is that - * this setup can only be done while the XDMA is in reset. If this - * were done in a driver, it would interrupt all other drivers - * using the XDMA. - */ - titan_writel(0x80021dff, GXCFG); /* XDMA reset */ - titan_writel(0x00000000, CPXCISRA); - titan_writel(0x00000000, CPXCISRB); /* clear pending interrupts */ -#if defined(CONFIG_HIGHMEM) -# error change for HIGHMEM support! -#else - titan_writel(0x00000000, GXDMADRPFX); /* buffer address prefix */ -#endif - titan_writel(0, GXDMA_DESCADR); - - for (i = 0x5040; i <= 0x5300; i += 0x0040) - titan_writel(0x80080000, i); /* reset channel */ - - titan_writel((0x1 << 29) /* no sparse tx descr. */ - | (0x1 << 28) /* no sparse rx descr. */ - | (0x1 << 23) | (0x1 << 24) /* descriptor coherency */ - | (0x1 << 21) | (0x1 << 22) /* data coherency */ - | (0x1 << 17) - | 0x1dff, - GXCFG); - -#if defined(CONFIG_SMP) -# error No SMP support -#else - /* All interrupts go to core #0 only. */ - titan_writel(0x1f007fff, CPDST0A); - titan_writel(0x00000000, CPDST0B); - titan_writel(0x0000ff3f, CPDST1A); - titan_writel(0x00000000, CPDST1B); - titan_writel(0x00ffffff, CPXDSTA); - titan_writel(0x00000000, CPXDSTB); -#endif - - /* Enable DUART interrupts, disable everything else. */ - titan_writel(0x04000000, CPGIG0ER); - titan_writel(0x000000c0, CPGIG1ER); - - excite_procfs_init(); - return 0; -} - -void __init plat_mem_setup(void) -{ - volatile u32 * const boot_ocd_base = (u32 *) 0xbf7fc000; - - /* Announce RAM to system */ - add_memory_region(0x00000000, memsize, BOOT_MEM_RAM); - - /* Set up the peripheral address map */ - *(boot_ocd_base + (LKB9 / sizeof(u32))) = 0; - *(boot_ocd_base + (LKB10 / sizeof(u32))) = 0; - *(boot_ocd_base + (LKB11 / sizeof(u32))) = 0; - *(boot_ocd_base + (LKB12 / sizeof(u32))) = 0; - wmb(); - *(boot_ocd_base + (LKB0 / sizeof(u32))) = EXCITE_PHYS_OCD >> 4; - wmb(); - - ocd_writel((EXCITE_PHYS_TITAN >> 4) | 0x1UL, LKB5); - ocd_writel(((EXCITE_SIZE_TITAN >> 4) & 0x7fffff00) - 0x100, LKM5); - ocd_writel((EXCITE_PHYS_SCRAM >> 4) | 0x1UL, LKB13); - ocd_writel(((EXCITE_SIZE_SCRAM >> 4) & 0xffffff00) - 0x100, LKM13); - - /* Local bus slot #0 */ - ocd_writel(0x00040510, LDP0); - ocd_writel((EXCITE_PHYS_BOOTROM >> 4) | 0x1UL, LKB9); - ocd_writel(((EXCITE_SIZE_BOOTROM >> 4) & 0x03ffff00) - 0x100, LKM9); - - /* Local bus slot #2 */ - ocd_writel(0x00000330, LDP2); - ocd_writel((EXCITE_PHYS_FPGA >> 4) | 0x1, LKB11); - ocd_writel(((EXCITE_SIZE_FPGA >> 4) - 0x100) & 0x03ffff00, LKM11); - - /* Local bus slot #3 */ - ocd_writel(0x00123413, LDP3); - ocd_writel((EXCITE_PHYS_NAND >> 4) | 0x1, LKB12); - ocd_writel(((EXCITE_SIZE_NAND >> 4) - 0x100) & 0x03ffff00, LKM12); -} - - - -console_initcall(excite_init_console); -arch_initcall(excite_platform_init); - -EXPORT_SYMBOL(titan_lock); -EXPORT_SYMBOL(titan_irqflags); -EXPORT_SYMBOL(titan_irq); -EXPORT_SYMBOL(ocd_base); -EXPORT_SYMBOL(titan_base); diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig index 2cb304a..1d5ec3c 100644 --- a/arch/mips/configs/ar7_defconfig +++ b/arch/mips/configs/ar7_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set CONFIG_AR7=y -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig index 94b7d57..8715de1 100644 --- a/arch/mips/configs/bcm47xx_defconfig +++ b/arch/mips/configs/bcm47xx_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set CONFIG_BCM47XX=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig index ea00c18..efa6598 100644 --- a/arch/mips/configs/bcm63xx_defconfig +++ b/arch/mips/configs/bcm63xx_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set CONFIG_BCM63XX=y # CONFIG_MIPS_COBALT is not set diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 13d9eb4..1f0228d 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index 185df23..be81bf6 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/cavium-octeon_defconfig b/arch/mips/configs/cavium-octeon_defconfig index 1819a4c..22819d9 100644 --- a/arch/mips/configs/cavium-octeon_defconfig +++ b/arch/mips/configs/cavium-octeon_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 6c8cca8..b150286 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set CONFIG_MIPS_COBALT=y # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index dbdf3bb..63cdea2 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_DB1000=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index fa68144..7ae0f9a 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_DB1100=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index d73f1de..a6d9e1f 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y # CONFIG_MIPS_DB1550 is not set CONFIG_MIPS_DB1200=y # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index ec3e028a..a3a462b 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_DB1500=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 7631dae..bfc962ed 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y CONFIG_MIPS_DB1550=y # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 9e65e6a..7eb6d1b 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set CONFIG_MACH_DECSTATION=y # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index 1bd84d4..c6b1d6b 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig deleted file mode 100644 index 1995d43..0000000 --- a/arch/mips/configs/excite_defconfig +++ /dev/null @@ -1,1335 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:31 2007 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -CONFIG_BASLER_EXCITE=y -# CONFIG_BASLER_EXCITE_PROTOTYPE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_DMA_COHERENT=y -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_IRQ_CPU_RM7K=y -CONFIG_IRQ_CPU_RM9K=y -CONFIG_MIPS_RM9122=y -CONFIG_SERIAL_RM9000=y -CONFIG_GPI_RM9000=y -CONFIG_WDT_RM9000=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -CONFIG_CPU_RM9000=y -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_RM9000=y -CONFIG_WEAK_ORDERING=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -# CONFIG_PREEMPT_NONE is not set -# CONFIG_PREEMPT_VOLUNTARY is not set -CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y -# CONFIG_KEXEC is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_BASLER_EXCITE is not set -# CONFIG_MTD_NAND_CAFE is not set -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_TGT=m -# CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -# CONFIG_SERIAL_8250_MANY_PORTS is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_RSA is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_WDT_RM9K_GPI=m - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_SMIVGX is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=m -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -# CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=m -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -# CONFIG_CRYPTO_HMAC is not set -CONFIG_CRYPTO_XCBC=m -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -# CONFIG_CRYPTO_DES is not set -CONFIG_CRYPTO_FCRYPT=m -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig index b3626de..17341a0 100644 --- a/arch/mips/configs/fuloong2e_defconfig +++ b/arch/mips/configs/fuloong2e_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_AR7 is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index f14d38b..3471ac9 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 1fc73aa..26127a8 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig index 539dccb..ac6c850 100644 --- a/arch/mips/configs/ip28_defconfig +++ b/arch/mips/configs/ip28_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index d934bde..56553b1 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig index d22df61..9db23fd 100644 --- a/arch/mips/configs/jazz_defconfig +++ b/arch/mips/configs/jazz_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set CONFIG_MACH_JAZZ=y diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 5380f1f..11fec0e 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig index 044074d..2fe15a5 100644 --- a/arch/mips/configs/lasat_defconfig +++ b/arch/mips/configs/lasat_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index 89e88a0..ddb1c92 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_AR7 is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 3f01870..38d9873 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # CONFIG_ZONE_DMA=y # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig index d001f7e8..9137571 100644 --- a/arch/mips/configs/markeins_defconfig +++ b/arch/mips/configs/markeins_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index 7358454..513e9a4 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index 8c720e5..b893f9d 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index ecbc030..89d2b6a 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index 9477f04..3199668 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # CONFIG_MACH_ALCHEMY=y -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index be8091e..c36e859 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_PB1100=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index e74ba79..4b43e36 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_PB1500=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 1d896fd..7c8d351 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -23,7 +23,6 @@ CONFIG_MIPS_PB1550=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/pnx8335-stb225_defconfig b/arch/mips/configs/pnx8335-stb225_defconfig index fef4d31..77a75f0 100644 --- a/arch/mips/configs/pnx8335-stb225_defconfig +++ b/arch/mips/configs/pnx8335-stb225_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index e10c711..945b27e 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index 5ed3c8d..ff0fc0b 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig index 3aff69ab..86c8007 100644 --- a/arch/mips/configs/powertv_defconfig +++ b/arch/mips/configs/powertv_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_AR7 is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig index f40c3a0..a9408db 100644 --- a/arch/mips/configs/rb532_defconfig +++ b/arch/mips/configs/rb532_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index 4f3b970..1c9a542 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -10,7 +10,6 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_AR7 is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index e53b8d0..5873fc5 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 7f38c0b..5244716 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index b505988..937b47c 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index b06a716..da73584 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 46512cf..99a0d21 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index b437eb7..d3646ea 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -9,7 +9,6 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig index 06acc74..c137831 100644 --- a/arch/mips/configs/wrppmc_defconfig +++ b/arch/mips/configs/wrppmc_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 69feaf8..4a04f0c 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_DB1550 is not set # CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set diff --git a/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h b/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h deleted file mode 100644 index 107104c..0000000 --- a/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004 Thomas Koeller <thomas.koeller@baslerweb.com> - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H - -/* - * Basler eXcite has an RM9122 processor. - */ -#define cpu_has_watch 1 -#define cpu_has_mips16 0 -#define cpu_has_divec 0 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_prefetch 1 -#define cpu_has_mcheck 0 -#define cpu_has_ejtag 0 - -#define cpu_has_llsc 1 -#define cpu_has_vtag_icache 0 -#define cpu_has_dc_aliases 0 -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_dsp 0 -#define cpu_icache_snoops_remote_store 0 -#define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 - -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 1 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#define cpu_has_inclusive_pcaches 0 - -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 32 -#define cpu_scache_line_size() 32 - -#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-excite/excite.h b/arch/mips/include/asm/mach-excite/excite.h deleted file mode 100644 index 4c29ba4..0000000 --- a/arch/mips/include/asm/mach-excite/excite.h +++ /dev/null @@ -1,154 +0,0 @@ -#ifndef __EXCITE_H__ -#define __EXCITE_H__ - -#include <linux/init.h> -#include <asm/addrspace.h> -#include <asm/types.h> - -#define EXCITE_CPU_EXT_CLOCK 100000000 - -#if !defined(__ASSEMBLY__) -void __init excite_kgdb_init(void); -void excite_procfs_init(void); -extern unsigned long memsize; -extern char modetty[]; -extern u32 unit_id; -#endif - -/* Base name for XICAP devices */ -#define XICAP_NAME "xicap_gpi" - -/* OCD register offsets */ -#define LKB0 0x0038 -#define LKB5 0x0128 -#define LKM5 0x012C -#define LKB7 0x0138 -#define LKM7 0x013c -#define LKB8 0x0140 -#define LKM8 0x0144 -#define LKB9 0x0148 -#define LKM9 0x014c -#define LKB10 0x0150 -#define LKM10 0x0154 -#define LKB11 0x0158 -#define LKM11 0x015c -#define LKB12 0x0160 -#define LKM12 0x0164 -#define LKB13 0x0168 -#define LKM13 0x016c -#define LDP0 0x0200 -#define LDP1 0x0210 -#define LDP2 0x0220 -#define LDP3 0x0230 -#define INTPIN0 0x0A40 -#define INTPIN1 0x0A44 -#define INTPIN2 0x0A48 -#define INTPIN3 0x0A4C -#define INTPIN4 0x0A50 -#define INTPIN5 0x0A54 -#define INTPIN6 0x0A58 -#define INTPIN7 0x0A5C - - - - -/* TITAN register offsets */ -#define CPRR 0x0004 -#define CPDSR 0x0008 -#define CPTC0R 0x000c -#define CPTC1R 0x0010 -#define CPCFG0 0x0020 -#define CPCFG1 0x0024 -#define CPDST0A 0x0028 -#define CPDST0B 0x002c -#define CPDST1A 0x0030 -#define CPDST1B 0x0034 -#define CPXDSTA 0x0038 -#define CPXDSTB 0x003c -#define CPXCISRA 0x0048 -#define CPXCISRB 0x004c -#define CPGIG0ER 0x0050 -#define CPGIG1ER 0x0054 -#define CPGRWL 0x0068 -#define CPURSLMT 0x00f8 -#define UACFG 0x0200 -#define UAINTS 0x0204 -#define SDRXFCIE 0x4828 -#define SDTXFCIE 0x4928 -#define INTP0Status0 0x1B00 -#define INTP0Mask0 0x1B04 -#define INTP0Set0 0x1B08 -#define INTP0Clear0 0x1B0C -#define GXCFG 0x5000 -#define GXDMADRPFX 0x5018 -#define GXDMA_DESCADR 0x501c -#define GXCH0TDESSTRT 0x5054 - -/* IRQ definitions */ -#define NMICONFIG 0xac0 -#define TITAN_MSGINT 0xc4 -#define TITAN_IRQ ((TITAN_MSGINT / 0x20) + 2) -#define FPGA0_MSGINT 0x5a -#define FPGA0_IRQ ((FPGA0_MSGINT / 0x20) + 2) -#define FPGA1_MSGINT 0x7b -#define FPGA1_IRQ ((FPGA1_MSGINT / 0x20) + 2) -#define PHY_MSGINT 0x9c -#define PHY_IRQ ((PHY_MSGINT / 0x20) + 2) - -#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE) -/* Pre-release units used interrupt pin #9 */ -#define USB_IRQ 11 -#else -/* Re-designed units use interrupt pin #1 */ -#define USB_MSGINT 0x39 -#define USB_IRQ ((USB_MSGINT / 0x20) + 2) -#endif -#define TIMER_IRQ 12 - - -/* Device address ranges */ -#define EXCITE_OFFS_OCD 0x1fffc000 -#define EXCITE_SIZE_OCD (16 * 1024) -#define EXCITE_PHYS_OCD CPHYSADDR(EXCITE_OFFS_OCD) -#define EXCITE_ADDR_OCD CKSEG1ADDR(EXCITE_OFFS_OCD) - -#define EXCITE_OFFS_SCRAM 0x1fffa000 -#define EXCITE_SIZE_SCRAM (8 << 10) -#define EXCITE_PHYS_SCRAM CPHYSADDR(EXCITE_OFFS_SCRAM) -#define EXCITE_ADDR_SCRAM CKSEG1ADDR(EXCITE_OFFS_SCRAM) - -#define EXCITE_OFFS_PCI_IO 0x1fff8000 -#define EXCITE_SIZE_PCI_IO (8 << 10) -#define EXCITE_PHYS_PCI_IO CPHYSADDR(EXCITE_OFFS_PCI_IO) -#define EXCITE_ADDR_PCI_IO CKSEG1ADDR(EXCITE_OFFS_PCI_IO) - -#define EXCITE_OFFS_TITAN 0x1fff0000 -#define EXCITE_SIZE_TITAN (32 << 10) -#define EXCITE_PHYS_TITAN CPHYSADDR(EXCITE_OFFS_TITAN) -#define EXCITE_ADDR_TITAN CKSEG1ADDR(EXCITE_OFFS_TITAN) - -#define EXCITE_OFFS_PCI_MEM 0x1ffe0000 -#define EXCITE_SIZE_PCI_MEM (64 << 10) -#define EXCITE_PHYS_PCI_MEM CPHYSADDR(EXCITE_OFFS_PCI_MEM) -#define EXCITE_ADDR_PCI_MEM CKSEG1ADDR(EXCITE_OFFS_PCI_MEM) - -#define EXCITE_OFFS_FPGA 0x1ffdc000 -#define EXCITE_SIZE_FPGA (16 << 10) -#define EXCITE_PHYS_FPGA CPHYSADDR(EXCITE_OFFS_FPGA) -#define EXCITE_ADDR_FPGA CKSEG1ADDR(EXCITE_OFFS_FPGA) - -#define EXCITE_OFFS_NAND 0x1ffd8000 -#define EXCITE_SIZE_NAND (16 << 10) -#define EXCITE_PHYS_NAND CPHYSADDR(EXCITE_OFFS_NAND) -#define EXCITE_ADDR_NAND CKSEG1ADDR(EXCITE_OFFS_NAND) - -#define EXCITE_OFFS_BOOTROM 0x1f000000 -#define EXCITE_SIZE_BOOTROM (8 << 20) -#define EXCITE_PHYS_BOOTROM CPHYSADDR(EXCITE_OFFS_BOOTROM) -#define EXCITE_ADDR_BOOTROM CKSEG1ADDR(EXCITE_OFFS_BOOTROM) - -/* FPGA address offsets */ -#define EXCITE_FPGA_DPR 0x0104 /* dual-ported ram */ -#define EXCITE_FPGA_SYSCTL 0x0200 /* system control register block */ - -#endif /* __EXCITE_H__ */ diff --git a/arch/mips/include/asm/mach-excite/excite_fpga.h b/arch/mips/include/asm/mach-excite/excite_fpga.h deleted file mode 100644 index 0a1ef69..0000000 --- a/arch/mips/include/asm/mach-excite/excite_fpga.h +++ /dev/null @@ -1,80 +0,0 @@ -#ifndef EXCITE_FPGA_H_INCLUDED -#define EXCITE_FPGA_H_INCLUDED - - -/** - * Address alignment of the individual FPGA bytes. - * The address arrangement of the individual bytes of the FPGA is two - * byte aligned at the embedded MK2 platform. - */ -#ifdef EXCITE_CCI_FPGA_MK2 -typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2))); -#else -typedef unsigned char excite_cci_fpga_align_t; -#endif - - -/** - * Size of Dual Ported RAM. - */ -#define EXCITE_DPR_SIZE 263 - - -/** - * Size of Reserved Status Fields in Dual Ported RAM. - */ -#define EXCITE_DPR_STATUS_SIZE 7 - - - -/** - * FPGA. - * Hardware register layout of the FPGA interface. The FPGA must accessed - * byte wise solely. - * @see EXCITE_CCI_DPR_MK2 - */ -typedef struct excite_fpga { - - /** - * Dual Ported RAM. - */ - excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE]; - - /** - * Status. - */ - excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE]; - -#ifdef EXCITE_CCI_FPGA_MK2 - /** - * RM9000 Interrupt. - * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite. - */ - excite_cci_fpga_align_t rm9k_int; -#else - /** - * MK2 Interrupt. - * Write access initiates interrupt at the ARM processor of the MK2. - */ - excite_cci_fpga_align_t mk2_int; - - excite_cci_fpga_align_t gap[0x1000-0x10f]; - - /** - * IRQ Source/Acknowledge. - */ - excite_cci_fpga_align_t rm9k_irq_src; - - /** - * IRQ Mask. - * Set bits enable the related interrupt. - */ - excite_cci_fpga_align_t rm9k_irq_mask; -#endif - - -} excite_fpga; - - - -#endif /* ndef EXCITE_FPGA_H_INCLUDED */ diff --git a/arch/mips/include/asm/mach-excite/excite_nandflash.h b/arch/mips/include/asm/mach-excite/excite_nandflash.h deleted file mode 100644 index c4cf614..0000000 --- a/arch/mips/include/asm/mach-excite/excite_nandflash.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __EXCITE_NANDFLASH_H__ -#define __EXCITE_NANDFLASH_H__ - -/* Resource names */ -#define EXCITE_NANDFLASH_RESOURCE_REGS "excite_nandflash_regs" - -#endif /* __EXCITE_NANDFLASH_H__ */ diff --git a/arch/mips/include/asm/mach-excite/rm9k_eth.h b/arch/mips/include/asm/mach-excite/rm9k_eth.h deleted file mode 100644 index 94705a4..0000000 --- a/arch/mips/include/asm/mach-excite/rm9k_eth.h +++ /dev/null @@ -1,23 +0,0 @@ -#if !defined(__RM9K_ETH_H__) -#define __RM9K_ETH_H__ - -#define RM9K_GE_NAME "rm9k_ge" - -/* Resource names */ -#define RM9K_GE_RESOURCE_MAC "rm9k_ge_mac" -#define RM9K_GE_RESOURCE_MSTAT "rm9k_ge_mstat" -#define RM9K_GE_RESOURCE_PKTPROC "rm9k_ge_pktproc" -#define RM9K_GE_RESOURCE_XDMA "rm9k_ge_xdma" -#define RM9K_GE_RESOURCE_FIFO_RX "rm9k_ge_fifo_rx" -#define RM9K_GE_RESOURCE_FIFO_TX "rm9k_ge_fifo_tx" -#define RM9K_GE_RESOURCE_FIFOMEM_RX "rm9k_ge_fifo_memory_rx" -#define RM9K_GE_RESOURCE_FIFOMEM_TX "rm9k_ge_fifo_memory_tx" -#define RM9K_GE_RESOURCE_PHY "rm9k_ge_phy" -#define RM9K_GE_RESOURCE_DMADESC_RX "rm9k_ge_dmadesc_rx" -#define RM9K_GE_RESOURCE_DMADESC_TX "rm9k_ge_dmadesc_tx" -#define RM9K_GE_RESOURCE_IRQ_MAIN "rm9k_ge_irq_main" -#define RM9K_GE_RESOURCE_IRQ_PHY "rm9k_ge_irq_phy" -#define RM9K_GE_RESOURCE_GPI_SLICE "rm9k_ge_gpi_slice" -#define RM9K_GE_RESOURCE_MDIO_CHANNEL "rm9k_ge_mdio_channel" - -#endif /* !defined(__RM9K_ETH_H__) */ diff --git a/arch/mips/include/asm/mach-excite/rm9k_wdt.h b/arch/mips/include/asm/mach-excite/rm9k_wdt.h deleted file mode 100644 index 3fa3c08..0000000 --- a/arch/mips/include/asm/mach-excite/rm9k_wdt.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __RM9K_WDT_H__ -#define __RM9K_WDT_H__ - -/* Device name */ -#define WDT_NAME "wdt_gpi" - -/* Resource names */ -#define WDT_RESOURCE_REGS "excite_watchdog_regs" -#define WDT_RESOURCE_IRQ "excite_watchdog_irq" -#define WDT_RESOURCE_COUNTER "excite_watchdog_counter" - -#endif /* __RM9K_WDT_H__ */ diff --git a/arch/mips/include/asm/mach-excite/rm9k_xicap.h b/arch/mips/include/asm/mach-excite/rm9k_xicap.h deleted file mode 100644 index 0095777..0000000 --- a/arch/mips/include/asm/mach-excite/rm9k_xicap.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __EXCITE_XICAP_H__ -#define __EXCITE_XICAP_H__ - - -/* Resource names */ -#define XICAP_RESOURCE_FIFO_RX "xicap_fifo_rx" -#define XICAP_RESOURCE_FIFO_TX "xicap_fifo_tx" -#define XICAP_RESOURCE_XDMA "xicap_xdma" -#define XICAP_RESOURCE_DMADESC "xicap_dmadesc" -#define XICAP_RESOURCE_PKTPROC "xicap_pktproc" -#define XICAP_RESOURCE_IRQ "xicap_irq" -#define XICAP_RESOURCE_GPI_SLICE "xicap_gpi_slice" -#define XICAP_RESOURCE_FIFO_BLK "xicap_fifo_blocks" -#define XICAP_RESOURCE_PKT_STREAM "xicap_pkt_stream" - -#endif /* __EXCITE_XICAP_H__ */ diff --git a/arch/mips/include/asm/mach-excite/war.h b/arch/mips/include/asm/mach-excite/war.h deleted file mode 100644 index 1f82180..0000000 --- a/arch/mips/include/asm/mach-excite/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MIPS_MACH_EXCITE_WAR_H -#define __ASM_MIPS_MACH_EXCITE_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 1 -#define ICACHE_REFILLS_WORKAROUND_WAR 1 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_EXCITE_WAR_H */ diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index c9a0dc1..c9209ca 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -22,7 +22,6 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ # # These are still pretty much in the old state, watch, go blind. # -obj-$(CONFIG_BASLER_EXCITE) += ops-titan.o pci-excite.o fixup-excite.o obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o diff --git a/arch/mips/pci/fixup-excite.c b/arch/mips/pci/fixup-excite.c deleted file mode 100644 index cd64d9f..0000000 --- a/arch/mips/pci/fixup-excite.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <excite.h> - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - if (pin == 0) - return -1; - - return USB_IRQ; /* USB controller is the only PCI device */ -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/pci-excite.c b/arch/mips/pci/pci-excite.c deleted file mode 100644 index 8a56876..0000000 --- a/arch/mips/pci/pci-excite.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * Based on the PMC-Sierra Yosemite board support by Ralf Baechle. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/bitops.h> -#include <asm/rm9k-ocd.h> -#include <excite.h> - - -extern struct pci_ops titan_pci_ops; - - -static struct resource - mem_resource = { - .name = "PCI memory", - .start = EXCITE_PHYS_PCI_MEM, - .end = EXCITE_PHYS_PCI_MEM + EXCITE_SIZE_PCI_MEM - 1, - .flags = IORESOURCE_MEM - }, - io_resource = { - .name = "PCI I/O", - .start = EXCITE_PHYS_PCI_IO, - .end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1, - .flags = IORESOURCE_IO - }; - - -static struct pci_controller bx_controller = { - .pci_ops = &titan_pci_ops, - .mem_resource = &mem_resource, - .mem_offset = 0x00000000UL, - .io_resource = &io_resource, - .io_offset = 0x00000000UL -}; - - -static char - iopage_failed[] __initdata = "Cannot allocate PCI I/O page", - modebits_no_pci[] __initdata = "PCI is not configured in mode bits"; - -#define RM9000x2_OCD_HTSC 0x0604 -#define RM9000x2_OCD_HTBHL 0x060c -#define RM9000x2_OCD_PCIHRST 0x078c - -#define RM9K_OCD_MODEBIT1 0x00d4 /* (MODEBIT1) Mode Bit 1 */ -#define RM9K_OCD_CPHDCR 0x00f4 /* CPU-PCI/HT Data Control. */ - -#define PCISC_FB2B 0x00000200 -#define PCISC_MWICG 0x00000010 -#define PCISC_EMC 0x00000004 -#define PCISC_ERMA 0x00000002 - - - -static int __init basler_excite_pci_setup(void) -{ - const unsigned int fullbars = memsize / (256 << 20); - unsigned int i; - - /* Check modebits to see if PCI is really enabled. */ - if (!((ocd_readl(RM9K_OCD_MODEBIT1) >> (47-32)) & 0x1)) - panic(modebits_no_pci); - - if (NULL == request_mem_region(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO, - "Memory-mapped PCI I/O page")) - panic(iopage_failed); - - /* Enable PCI 0 as master for config cycles */ - ocd_writel(PCISC_EMC | PCISC_ERMA, RM9000x2_OCD_HTSC); - - - /* Set up latency timer */ - ocd_writel(0x8008, RM9000x2_OCD_HTBHL); - - /* Setup host IO and Memory space */ - ocd_writel((EXCITE_PHYS_PCI_IO >> 4) | 1, LKB7); - ocd_writel(((EXCITE_SIZE_PCI_IO >> 4) & 0x7fffff00) - 0x100, LKM7); - ocd_writel((EXCITE_PHYS_PCI_MEM >> 4) | 1, LKB8); - ocd_writel(((EXCITE_SIZE_PCI_MEM >> 4) & 0x7fffff00) - 0x100, LKM8); - - /* Set up PCI BARs to map all installed memory */ - for (i = 0; i < 6; i++) { - const unsigned int bar = 0x610 + i * 4; - - if (i < fullbars) { - ocd_writel(0x10000000 * i, bar); - ocd_writel(0x01000000 * i, bar + 0x140); - ocd_writel(0x0ffff029, bar + 0x100); - continue; - } - - if (i == fullbars) { - int o; - u32 mask; - - const unsigned long rem = memsize - i * 0x10000000; - if (!rem) { - ocd_writel(0x00000000, bar + 0x100); - continue; - } - - o = ffs(rem) - 1; - if (rem & ~(0x1 << o)) - o++; - mask = ((0x1 << o) & 0x0ffff000) - 0x1000; - ocd_writel(0x10000000 * i, bar); - ocd_writel(0x01000000 * i, bar + 0x140); - ocd_writel(0x00000029 | mask, bar + 0x100); - continue; - } - - ocd_writel(0x00000000, bar + 0x100); - } - - /* Finally, enable the PCI interrupt */ -#if USB_IRQ > 7 - set_c0_intcontrol(1 << USB_IRQ); -#else - set_c0_status(1 << (USB_IRQ + 8)); -#endif - - ioport_resource.start = EXCITE_PHYS_PCI_IO; - ioport_resource.end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1; - set_io_port_base((unsigned long) ioremap_nocache(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO)); - register_pci_controller(&bx_controller); - return 0; -} - - -arch_initcall(basler_excite_pci_setup); diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 7678538..677cd53 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -291,14 +291,6 @@ config MTD_NAND_SHARPSL tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)" depends on ARCH_PXA -config MTD_NAND_BASLER_EXCITE - tristate "Support for NAND Flash on Basler eXcite" - depends on BASLER_EXCITE - help - This enables the driver for the NAND flash device found on the - Basler eXcite Smart Camera. If built as a module, the driver - will be named excite_nandflash. - config MTD_NAND_CAFE tristate "NAND support for OLPC CAFÉ chip" depends on PCI diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 460a1f3..1407bd1 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o obj-$(CONFIG_MTD_NAND_OMAP2) += omap2.o obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o -obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c deleted file mode 100644 index af6a6a5..0000000 --- a/drivers/mtd/nand/excite_nandflash.c +++ /dev/null @@ -1,248 +0,0 @@ -/* -* Copyright (C) 2005 - 2007 by Basler Vision Technologies AG -* Author: Thomas Koeller <thomas.koeller.qbaslerweb.com> -* Original code by Thies Moeller <thies.moeller@baslerweb.com> -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/nand_ecc.h> -#include <linux/mtd/partitions.h> - -#include <asm/io.h> -#include <asm/rm9k-ocd.h> - -#include <excite_nandflash.h> - -#define EXCITE_NANDFLASH_VERSION "0.1" - -/* I/O register offsets */ -#define EXCITE_NANDFLASH_DATA_BYTE 0x00 -#define EXCITE_NANDFLASH_STATUS_BYTE 0x0c -#define EXCITE_NANDFLASH_ADDR_BYTE 0x10 -#define EXCITE_NANDFLASH_CMD_BYTE 0x14 - -/* prefix for debug output */ -static const char module_id[] = "excite_nandflash"; - -/* - * partition definition - */ -static const struct mtd_partition partition_info[] = { - { - .name = "eXcite RootFS", - .offset = 0, - .size = MTDPART_SIZ_FULL - } -}; - -static inline const struct resource * -excite_nand_get_resource(struct platform_device *d, unsigned long flags, - const char *basename) -{ - char buf[80]; - - if (snprintf(buf, sizeof buf, "%s_%u", basename, d->id) >= sizeof buf) - return NULL; - return platform_get_resource_byname(d, flags, buf); -} - -static inline void __iomem * -excite_nand_map_regs(struct platform_device *d, const char *basename) -{ - void *result = NULL; - const struct resource *const r = - excite_nand_get_resource(d, IORESOURCE_MEM, basename); - - if (r) - result = ioremap_nocache(r->start, r->end + 1 - r->start); - return result; -} - -/* controller and mtd information */ -struct excite_nand_drvdata { - struct mtd_info board_mtd; - struct nand_chip board_chip; - void __iomem *regs; - void __iomem *tgt; -}; - -/* Control function */ -static void excite_nand_control(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - struct excite_nand_drvdata * const d = - container_of(mtd, struct excite_nand_drvdata, board_mtd); - - switch (ctrl) { - case NAND_CTRL_CHANGE | NAND_CTRL_CLE: - d->tgt = d->regs + EXCITE_NANDFLASH_CMD_BYTE; - break; - case NAND_CTRL_CHANGE | NAND_CTRL_ALE: - d->tgt = d->regs + EXCITE_NANDFLASH_ADDR_BYTE; - break; - case NAND_CTRL_CHANGE | NAND_NCE: - d->tgt = d->regs + EXCITE_NANDFLASH_DATA_BYTE; - break; - } - - if (cmd != NAND_CMD_NONE) - __raw_writeb(cmd, d->tgt); -} - -/* Return 0 if flash is busy, 1 if ready */ -static int excite_nand_devready(struct mtd_info *mtd) -{ - struct excite_nand_drvdata * const drvdata = - container_of(mtd, struct excite_nand_drvdata, board_mtd); - - return __raw_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS_BYTE); -} - -/* - * Called by device layer to remove the driver. - * The binding to the mtd and all allocated - * resources are released. - */ -static int __devexit excite_nand_remove(struct platform_device *dev) -{ - struct excite_nand_drvdata * const this = platform_get_drvdata(dev); - - platform_set_drvdata(dev, NULL); - - if (unlikely(!this)) { - printk(KERN_ERR "%s: called %s without private data!!", - module_id, __func__); - return -EINVAL; - } - - /* first thing we need to do is release our mtd - * then go through freeing the resource used - */ - nand_release(&this->board_mtd); - - /* free the common resources */ - iounmap(this->regs); - kfree(this); - - DEBUG(MTD_DEBUG_LEVEL1, "%s: removed\n", module_id); - return 0; -} - -/* - * Called by device layer when it finds a device matching - * one our driver can handle. This code checks to see if - * it can allocate all necessary resources then calls the - * nand layer to look for devices. -*/ -static int __init excite_nand_probe(struct platform_device *pdev) -{ - struct excite_nand_drvdata *drvdata; /* private driver data */ - struct nand_chip *board_chip; /* private flash chip data */ - struct mtd_info *board_mtd; /* mtd info for this board */ - int scan_res; - - drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); - if (unlikely(!drvdata)) { - printk(KERN_ERR "%s: no memory for drvdata\n", - module_id); - return -ENOMEM; - } - - /* bind private data into driver */ - platform_set_drvdata(pdev, drvdata); - - /* allocate and map the resource */ - drvdata->regs = - excite_nand_map_regs(pdev, EXCITE_NANDFLASH_RESOURCE_REGS); - - if (unlikely(!drvdata->regs)) { - printk(KERN_ERR "%s: cannot reserve register region\n", - module_id); - kfree(drvdata); - return -ENXIO; - } - - drvdata->tgt = drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE; - - /* initialise our chip */ - board_chip = &drvdata->board_chip; - board_chip->IO_ADDR_R = board_chip->IO_ADDR_W = - drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE; - board_chip->cmd_ctrl = excite_nand_control; - board_chip->dev_ready = excite_nand_devready; - board_chip->chip_delay = 25; - board_chip->ecc.mode = NAND_ECC_SOFT; - - /* link chip to mtd */ - board_mtd = &drvdata->board_mtd; - board_mtd->priv = board_chip; - - DEBUG(MTD_DEBUG_LEVEL2, "%s: device scan\n", module_id); - scan_res = nand_scan(&drvdata->board_mtd, 1); - - if (likely(!scan_res)) { - DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id); - add_mtd_partitions(&drvdata->board_mtd, partition_info, - ARRAY_SIZE(partition_info)); - } else { - iounmap(drvdata->regs); - kfree(drvdata); - printk(KERN_ERR "%s: device scan failed\n", module_id); - return -EIO; - } - return 0; -} - -static struct platform_driver excite_nand_driver = { - .driver = { - .name = "excite_nand", - .owner = THIS_MODULE, - }, - .probe = excite_nand_probe, - .remove = __devexit_p(excite_nand_remove) -}; - -static int __init excite_nand_init(void) -{ - pr_info("Basler eXcite nand flash driver Version " - EXCITE_NANDFLASH_VERSION "\n"); - return platform_driver_register(&excite_nand_driver); -} - -static void __exit excite_nand_exit(void) -{ - platform_driver_unregister(&excite_nand_driver); -} - -module_init(excite_nand_init); -module_exit(excite_nand_exit); - -MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>"); -MODULE_DESCRIPTION("Basler eXcite NAND-Flash driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(EXCITE_NANDFLASH_VERSION) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index d958b76..da84fd0 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -815,16 +815,6 @@ config PNX833X_WDT timer has expired and no process has written to /dev/watchdog during that time. -config WDT_RM9K_GPI - tristate "RM9000/GPI hardware watchdog" - depends on CPU_RM9000 - help - Watchdog implementation using the GPI hardware found on - PMC-Sierra RM9xxx CPUs. - - To compile this driver as a module, choose M here: the - module will be called rm9k_wdt. - config SIBYTE_WDOG tristate "Sibyte SoC hardware watchdog" depends on CPU_SB1 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 89c045d..475c611 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -109,7 +109,6 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o obj-$(CONFIG_INDYDOG) += indydog.o obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o -obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o obj-$(CONFIG_AR7_WDT) += ar7_wdt.o obj-$(CONFIG_TXX9_WDT) += txx9wdt.o diff --git a/drivers/watchdog/rm9k_wdt.c b/drivers/watchdog/rm9k_wdt.c deleted file mode 100644 index bb66958..0000000 --- a/drivers/watchdog/rm9k_wdt.c +++ /dev/null @@ -1,419 +0,0 @@ -/* - * Watchdog implementation for GPI h/w found on PMC-Sierra RM9xxx - * chips. - * - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller <thomas.koeller@baslerweb.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/interrupt.h> -#include <linux/fs.h> -#include <linux/reboot.h> -#include <linux/notifier.h> -#include <linux/miscdevice.h> -#include <linux/watchdog.h> -#include <linux/io.h> -#include <linux/uaccess.h> -#include <asm/atomic.h> -#include <asm/processor.h> -#include <asm/system.h> -#include <asm/rm9k-ocd.h> - -#include <rm9k_wdt.h> - - -#define CLOCK 125000000 -#define MAX_TIMEOUT_SECONDS 32 -#define CPCCR 0x0080 -#define CPGIG1SR 0x0044 -#define CPGIG1ER 0x0054 - - -/* Function prototypes */ -static irqreturn_t wdt_gpi_irqhdl(int, void *); -static void wdt_gpi_start(void); -static void wdt_gpi_stop(void); -static void wdt_gpi_set_timeout(unsigned int); -static int wdt_gpi_open(struct inode *, struct file *); -static int wdt_gpi_release(struct inode *, struct file *); -static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t, - loff_t *); -static long wdt_gpi_ioctl(struct file *, unsigned int, unsigned long); -static int wdt_gpi_notify(struct notifier_block *, unsigned long, void *); -static const struct resource *wdt_gpi_get_resource(struct platform_device *, - const char *, unsigned int); -static int __init wdt_gpi_probe(struct platform_device *); -static int __exit wdt_gpi_remove(struct platform_device *); - - -static const char wdt_gpi_name[] = "wdt_gpi"; -static atomic_t opencnt; -static int expect_close; -static int locked; - - -/* These are set from device resources */ -static void __iomem *wd_regs; -static unsigned int wd_irq, wd_ctr; - - -/* Module arguments */ -static int timeout = MAX_TIMEOUT_SECONDS; -module_param(timeout, int, 0444); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds"); - -static unsigned long resetaddr = 0xbffdc200; -module_param(resetaddr, ulong, 0444); -MODULE_PARM_DESC(resetaddr, "Address to write to to force a reset"); - -static unsigned long flagaddr = 0xbffdc104; -module_param(flagaddr, ulong, 0444); -MODULE_PARM_DESC(flagaddr, "Address to write to boot flags to"); - -static int powercycle; -module_param(powercycle, bool, 0444); -MODULE_PARM_DESC(powercycle, "Cycle power if watchdog expires"); - -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, bool, 0444); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be disabled once started"); - - -/* Kernel interfaces */ -static const struct file_operations fops = { - .owner = THIS_MODULE, - .open = wdt_gpi_open, - .release = wdt_gpi_release, - .write = wdt_gpi_write, - .unlocked_ioctl = wdt_gpi_ioctl, -}; - -static struct miscdevice miscdev = { - .minor = WATCHDOG_MINOR, - .name = wdt_gpi_name, - .fops = &fops, -}; - -static struct notifier_block wdt_gpi_shutdown = { - .notifier_call = wdt_gpi_notify, -}; - - -/* Interrupt handler */ -static irqreturn_t wdt_gpi_irqhdl(int irq, void *ctxt) -{ - if (!unlikely(__raw_readl(wd_regs + 0x0008) & 0x1)) - return IRQ_NONE; - __raw_writel(0x1, wd_regs + 0x0008); - - - printk(KERN_CRIT "%s: watchdog expired - resetting system\n", - wdt_gpi_name); - - *(volatile char *) flagaddr |= 0x01; - *(volatile char *) resetaddr = powercycle ? 0x01 : 0x2; - iob(); - while (1) - cpu_relax(); -} - - -/* Watchdog functions */ -static void wdt_gpi_start(void) -{ - u32 reg; - - lock_titan_regs(); - reg = titan_readl(CPGIG1ER); - titan_writel(reg | (0x100 << wd_ctr), CPGIG1ER); - iob(); - unlock_titan_regs(); -} - -static void wdt_gpi_stop(void) -{ - u32 reg; - - lock_titan_regs(); - reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4)); - titan_writel(reg, CPCCR); - reg = titan_readl(CPGIG1ER); - titan_writel(reg & ~(0x100 << wd_ctr), CPGIG1ER); - iob(); - unlock_titan_regs(); -} - -static void wdt_gpi_set_timeout(unsigned int to) -{ - u32 reg; - const u32 wdval = (to * CLOCK) & ~0x0000000f; - - lock_titan_regs(); - reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4)); - titan_writel(reg, CPCCR); - wmb(); - __raw_writel(wdval, wd_regs + 0x0000); - wmb(); - titan_writel(reg | (0x2 << (wd_ctr * 4)), CPCCR); - wmb(); - titan_writel(reg | (0x5 << (wd_ctr * 4)), CPCCR); - iob(); - unlock_titan_regs(); -} - - -/* /dev/watchdog operations */ -static int wdt_gpi_open(struct inode *inode, struct file *file) -{ - int res; - - if (unlikely(atomic_dec_if_positive(&opencnt) < 0)) - return -EBUSY; - - expect_close = 0; - if (locked) { - module_put(THIS_MODULE); - free_irq(wd_irq, &miscdev); - locked = 0; - } - - res = request_irq(wd_irq, wdt_gpi_irqhdl, IRQF_SHARED | IRQF_DISABLED, - wdt_gpi_name, &miscdev); - if (unlikely(res)) - return res; - - wdt_gpi_set_timeout(timeout); - wdt_gpi_start(); - - printk(KERN_INFO "%s: watchdog started, timeout = %u seconds\n", - wdt_gpi_name, timeout); - return nonseekable_open(inode, file); -} - -static int wdt_gpi_release(struct inode *inode, struct file *file) -{ - if (nowayout) { - printk(KERN_INFO "%s: no way out - watchdog left running\n", - wdt_gpi_name); - __module_get(THIS_MODULE); - locked = 1; - } else { - if (expect_close) { - wdt_gpi_stop(); - free_irq(wd_irq, &miscdev); - printk(KERN_INFO "%s: watchdog stopped\n", - wdt_gpi_name); - } else { - printk(KERN_CRIT "%s: unexpected close() -" - " watchdog left running\n", - wdt_gpi_name); - wdt_gpi_set_timeout(timeout); - __module_get(THIS_MODULE); - locked = 1; - } - } - - atomic_inc(&opencnt); - return 0; -} - -static ssize_t wdt_gpi_write(struct file *f, const char __user *d, size_t s, - loff_t *o) -{ - char val; - - wdt_gpi_set_timeout(timeout); - expect_close = (s > 0) && !get_user(val, d) && (val == 'V'); - return s ? 1 : 0; -} - -static long wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg) -{ - long res = -ENOTTY; - const long size = _IOC_SIZE(cmd); - int stat; - void __user *argp = (void __user *)arg; - static struct watchdog_info wdinfo = { - .identity = "RM9xxx/GPI watchdog", - .firmware_version = 0, - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING - }; - - if (unlikely(_IOC_TYPE(cmd) != WATCHDOG_IOCTL_BASE)) - return -ENOTTY; - - if ((_IOC_DIR(cmd) & _IOC_READ) - && !access_ok(VERIFY_WRITE, arg, size)) - return -EFAULT; - - if ((_IOC_DIR(cmd) & _IOC_WRITE) - && !access_ok(VERIFY_READ, arg, size)) - return -EFAULT; - - expect_close = 0; - - switch (cmd) { - case WDIOC_GETSUPPORT: - wdinfo.options = nowayout ? - WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING : - WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | - WDIOF_MAGICCLOSE; - res = __copy_to_user(argp, &wdinfo, size) ? -EFAULT : size; - break; - - case WDIOC_GETSTATUS: - break; - - case WDIOC_GETBOOTSTATUS: - stat = (*(volatile char *) flagaddr & 0x01) - ? WDIOF_CARDRESET : 0; - res = __copy_to_user(argp, &stat, size) ? - -EFAULT : size; - break; - - case WDIOC_SETOPTIONS: - break; - - case WDIOC_KEEPALIVE: - wdt_gpi_set_timeout(timeout); - res = size; - break; - - case WDIOC_SETTIMEOUT: - { - int val; - if (unlikely(__copy_from_user(&val, argp, size))) { - res = -EFAULT; - break; - } - - if (val > MAX_TIMEOUT_SECONDS) - val = MAX_TIMEOUT_SECONDS; - timeout = val; - wdt_gpi_set_timeout(val); - res = size; - printk(KERN_INFO "%s: timeout set to %u seconds\n", - wdt_gpi_name, timeout); - } - break; - - case WDIOC_GETTIMEOUT: - res = __copy_to_user(argp, &timeout, size) ? - -EFAULT : size; - break; - } - - return res; -} - - -/* Shutdown notifier */ -static int wdt_gpi_notify(struct notifier_block *this, unsigned long code, - void *unused) -{ - if (code == SYS_DOWN || code == SYS_HALT) - wdt_gpi_stop(); - - return NOTIFY_DONE; -} - - -/* Init & exit procedures */ -static const struct resource *wdt_gpi_get_resource(struct platform_device *pdv, - const char *name, unsigned int type) -{ - char buf[80]; - if (snprintf(buf, sizeof(buf), "%s_0", name) >= sizeof(buf)) - return NULL; - return platform_get_resource_byname(pdv, type, buf); -} - -/* No hotplugging on the platform bus - use __devinit */ -static int __devinit wdt_gpi_probe(struct platform_device *pdv) -{ - int res; - const struct resource - * const rr = wdt_gpi_get_resource(pdv, WDT_RESOURCE_REGS, - IORESOURCE_MEM), - * const ri = wdt_gpi_get_resource(pdv, WDT_RESOURCE_IRQ, - IORESOURCE_IRQ), - * const rc = wdt_gpi_get_resource(pdv, WDT_RESOURCE_COUNTER, - 0); - - if (unlikely(!rr || !ri || !rc)) - return -ENXIO; - - wd_regs = ioremap_nocache(rr->start, rr->end + 1 - rr->start); - if (unlikely(!wd_regs)) - return -ENOMEM; - wd_irq = ri->start; - wd_ctr = rc->start; - res = misc_register(&miscdev); - if (res) - iounmap(wd_regs); - else - register_reboot_notifier(&wdt_gpi_shutdown); - return res; -} - -static int __devexit wdt_gpi_remove(struct platform_device *dev) -{ - int res; - - unregister_reboot_notifier(&wdt_gpi_shutdown); - res = misc_deregister(&miscdev); - iounmap(wd_regs); - wd_regs = NULL; - return res; -} - - -/* Device driver init & exit */ -static struct platform_driver wgt_gpi_driver = { - .driver = { - .name = wdt_gpi_name, - .owner = THIS_MODULE, - }, - .probe = wdt_gpi_probe, - .remove = __devexit_p(wdt_gpi_remove), -}; - -static int __init wdt_gpi_init_module(void) -{ - atomic_set(&opencnt, 1); - if (timeout > MAX_TIMEOUT_SECONDS) - timeout = MAX_TIMEOUT_SECONDS; - return platform_driver_register(&wdt_gpi_driver); -} - -static void __exit wdt_gpi_cleanup_module(void) -{ - platform_driver_unregister(&wdt_gpi_driver); -} - -module_init(wdt_gpi_init_module); -module_exit(wdt_gpi_cleanup_module); - -MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>"); -MODULE_DESCRIPTION("Basler eXcite watchdog driver for gpi devices"); -MODULE_VERSION("0.1"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); - |
