summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/net/phy/broadcom.c43
-rw-r--r--drivers/net/tg3.c3
-rw-r--r--include/linux/brcmphy.h2
3 files changed, 46 insertions, 2 deletions
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index bddf4a4..7491433 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -25,6 +25,9 @@
#define BRCM_PHY_MODEL(phydev) \
((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask)
+#define BRCM_PHY_REV(phydev) \
+ ((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask))
+
#define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */
#define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */
@@ -95,11 +98,16 @@
#define BCM_LED_SRC_OFF 0xe /* Tied high */
#define BCM_LED_SRC_ON 0xf /* Tied low */
+
/*
* BCM5482: Shadow registers
* Shadow values go into bits [14:10] of register 0x1c to select a shadow
* register to access.
*/
+/* 00101: Spare Control Register 3 */
+#define BCM54XX_SHD_SCR3 0x05
+#define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001
+
#define BCM5482_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */
/* LED3 / ~LINKSPD[2] selector */
#define BCM5482_SHD_LEDS1_LED3(src) ((src & 0xf) << 4)
@@ -112,6 +120,7 @@
#define BCM5482_SHD_MODE 0x1f /* 11111: Mode Control Register */
#define BCM5482_SHD_MODE_1000BX 0x0001 /* Enable 1000BASE-X registers */
+
/*
* EXPANSION SHADOW ACCESS REGISTERS. (PHY REG 0x15, 0x16, and 0x17)
*/
@@ -309,6 +318,37 @@ error:
return err ? err : err2;
}
+static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
+{
+ u32 val, orig;
+
+ /* Abort if we are using an untested phy. */
+ if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 ||
+ BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M)
+ return;
+
+ val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
+ if (val < 0)
+ return;
+
+ orig = val;
+
+ if (phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) {
+ if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+ BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
+ BRCM_PHY_REV(phydev) >= 0x3) {
+ /* Here, bit 0 _disables_ CLK125 when set */
+ val |= BCM54XX_SHD_SCR3_DEF_CLK125;
+ } else {
+ /* Here, bit 0 _enables_ CLK125 when set */
+ val &= ~BCM54XX_SHD_SCR3_DEF_CLK125;
+ }
+ }
+
+ if (orig != val)
+ bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
+}
+
static int bcm54xx_config_init(struct phy_device *phydev)
{
int reg, err;
@@ -336,6 +376,9 @@ static int bcm54xx_config_init(struct phy_device *phydev)
(phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE))
bcm54xx_shadow_write(phydev, BCM54XX_SHD_RGMII_MODE, 0);
+ if (phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)
+ bcm54xx_adjust_rxrefclk(phydev);
+
bcm54xx_phydsp_config(phydev);
return 0;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 592b5bf..369ddba 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1100,7 +1100,8 @@ static int tg3_mdio_init(struct tg3 *tp)
break;
case TG3_PHY_ID_BCM50610:
case TG3_PHY_ID_BCM50610M:
- phydev->dev_flags |= PHY_BRCM_CLEAR_RGMII_MODE;
+ phydev->dev_flags |= PHY_BRCM_CLEAR_RGMII_MODE |
+ PHY_BRCM_RX_REFCLK_UNUSED;
if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)
phydev->dev_flags |= PHY_BRCM_STD_IBND_DISABLE;
if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 6e7ffce..5943227 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -4,7 +4,7 @@
#define PHY_BCM_FLAGS_INTF_XAUI 0x00000020
#define PHY_BRCM_WIRESPEED_ENABLE 0x00000100
#define PHY_BRCM_AUTO_PWRDWN_ENABLE 0x00000200
-#define PHY_BRCM_APD_CLK125_ENABLE 0x00000400
+#define PHY_BRCM_RX_REFCLK_UNUSED 0x00000400
#define PHY_BRCM_STD_IBND_DISABLE 0x00000800
#define PHY_BRCM_EXT_IBND_RX_ENABLE 0x00001000
#define PHY_BRCM_EXT_IBND_TX_ENABLE 0x00002000
OpenPOWER on IntegriCloud