diff options
54 files changed, 203 insertions, 207 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 94b823f..b694a9d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -925,14 +925,14 @@ S: Maintained ARM/NOMADIK ARCHITECTURE M: Alessandro Rubini <rubini@unipv.it> -M: Linus Walleij <linus.walleij@stericsson.com> +M: Linus Walleij <linus.walleij@linaro.org> M: STEricsson <STEricsson_nomadik_linux@list.st.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-nomadik/ F: arch/arm/plat-nomadik/ F: drivers/i2c/busses/i2c-nomadik.c -T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT M: Nelson Castillo <arhuaco@freaks-unidos.net> @@ -1146,7 +1146,7 @@ F: drivers/usb/host/ehci-w90x900.c F: drivers/video/nuc900fb.c ARM/U300 MACHINE SUPPORT -M: Linus Walleij <linus.walleij@stericsson.com> +M: Linus Walleij <linus.walleij@linaro.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Supported F: arch/arm/mach-u300/ @@ -1161,15 +1161,20 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git ARM/Ux500 ARM ARCHITECTURE M: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> -M: Linus Walleij <linus.walleij@stericsson.com> +M: Linus Walleij <linus.walleij@linaro.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-ux500/ +F: drivers/clocksource/clksrc-dbx500-prcmu.c F: drivers/dma/ste_dma40* +F: drivers/hwspinlock/u8500_hsem.c F: drivers/mfd/abx500* F: drivers/mfd/ab8500* -F: drivers/mfd/stmpe* +F: drivers/mfd/dbx500* +F: drivers/mfd/db8500* +F: drivers/pinctrl/pinctrl-nomadik* F: drivers/rtc/rtc-ab8500.c +F: drivers/rtc/rtc-pl031.c T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git ARM/VFP SUPPORT @@ -3094,7 +3099,7 @@ F: include/linux/gigaset_dev.h GPIO SUBSYSTEM M: Grant Likely <grant.likely@secretlab.ca> -M: Linus Walleij <linus.walleij@stericsson.com> +M: Linus Walleij <linus.walleij@linaro.org> S: Maintained T: git git://git.secretlab.ca/git/linux-2.6.git F: Documentation/gpio.txt diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 59509c4..bd0cff3 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -154,5 +154,10 @@ #size-cells = <0>; ti,hwmods = "i2c3"; }; + + wdt2: wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; }; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index a874dbf..e613831 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -51,11 +51,11 @@ dma-apbh@80004000 { compatible = "fsl,imx23-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; ecc@80008000 { - reg = <0x80008000 2000>; + reg = <0x80008000 0x2000>; status = "disabled"; }; @@ -63,7 +63,7 @@ compatible = "fsl,imx23-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; @@ -72,14 +72,14 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <15 14>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; etm@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; status = "disabled"; }; @@ -87,7 +87,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx23-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; @@ -273,32 +273,32 @@ }; emi@80020000 { - reg = <0x80020000 2000>; + reg = <0x80020000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx23-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; @@ -310,14 +310,14 @@ }; ssp1: ssp@80034000 { - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <2 20>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; tvenc@80038000 { - reg = <0x80038000 2000>; + reg = <0x80038000 0x2000>; status = "disabled"; }; }; @@ -330,37 +330,37 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; status = "disabled"; }; audio-out@80048000 { - reg = <0x80048000 2000>; + reg = <0x80048000 0x2000>; status = "disabled"; }; audio-in@8004c000 { - reg = <0x8004c000 2000>; + reg = <0x8004c000 0x2000>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; @@ -370,26 +370,26 @@ }; i2c@80058000 { - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; status = "disabled"; }; rtc@8005c000 { compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x8005c000 2000>; + reg = <0x8005c000 0x2000>; interrupts = <22>; }; pwm: pwm@80064000 { compatible = "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <5>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; @@ -429,7 +429,7 @@ ranges; usbctrl@80080000 { - reg = <0x80080000 0x10000>; + reg = <0x80080000 0x40000>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts index d3f8296..0a8978a 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -27,7 +27,7 @@ status = "okay"; }; - uart@1000a000 { + uart1: serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 787efac..3fa6d19 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -57,18 +57,18 @@ }; hsadc@80002000 { - reg = <0x80002000 2000>; + reg = <0x80002000 0x2000>; interrupts = <13 87>; status = "disabled"; }; dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; perfmon@80006000 { - reg = <0x80006000 800>; + reg = <0x80006000 0x800>; interrupts = <27>; status = "disabled"; }; @@ -77,7 +77,7 @@ compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; @@ -86,28 +86,28 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <96 82>; fsl,ssp-dma-channel = <0>; status = "disabled"; }; ssp1: ssp@80012000 { - reg = <0x80012000 2000>; + reg = <0x80012000 0x2000>; interrupts = <97 83>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; ssp2: ssp@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; interrupts = <98 84>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; ssp3: ssp@80016000 { - reg = <0x80016000 2000>; + reg = <0x80016000 0x2000>; interrupts = <99 85>; fsl,ssp-dma-channel = <3>; status = "disabled"; @@ -117,7 +117,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; @@ -510,96 +510,96 @@ }; digctl@8001c000 { - reg = <0x8001c000 2000>; + reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; }; etm@80022000 { - reg = <0x80022000 2000>; + reg = <0x80022000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; interrupts = <52 53 54>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; interrupts = <39>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; lcdif@80030000 { compatible = "fsl,imx28-lcdif"; - reg = <0x80030000 2000>; + reg = <0x80030000 0x2000>; interrupts = <38 86>; status = "disabled"; }; can0: can@80032000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80032000 2000>; + reg = <0x80032000 0x2000>; interrupts = <8>; status = "disabled"; }; can1: can@80034000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <9>; status = "disabled"; }; simdbg@8003c000 { - reg = <0x8003c000 200>; + reg = <0x8003c000 0x200>; status = "disabled"; }; simgpmisel@8003c200 { - reg = <0x8003c200 100>; + reg = <0x8003c200 0x100>; status = "disabled"; }; simsspsel@8003c300 { - reg = <0x8003c300 100>; + reg = <0x8003c300 0x100>; status = "disabled"; }; simmemsel@8003c400 { - reg = <0x8003c400 100>; + reg = <0x8003c400 0x100>; status = "disabled"; }; gpiomon@8003c500 { - reg = <0x8003c500 100>; + reg = <0x8003c500 0x100>; status = "disabled"; }; simenet@8003c700 { - reg = <0x8003c700 100>; + reg = <0x8003c700 0x100>; status = "disabled"; }; armjtag@8003c800 { - reg = <0x8003c800 100>; + reg = <0x8003c800 0x100>; status = "disabled"; }; }; @@ -612,45 +612,45 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { compatible = "fsl,imx28-saif"; - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; interrupts = <59 80>; fsl,saif-dma-channel = <4>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { compatible = "fsl,imx28-saif"; - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; interrupts = <58 81>; fsl,saif-dma-channel = <5>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; spdif@80054000 { - reg = <0x80054000 2000>; + reg = <0x80054000 0x2000>; interrupts = <45 66>; status = "disabled"; }; rtc@80056000 { compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x80056000 2000>; + reg = <0x80056000 0x2000>; interrupts = <29>; }; @@ -658,7 +658,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; interrupts = <111 68>; clock-frequency = <100000>; status = "disabled"; @@ -668,7 +668,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x8005a000 2000>; + reg = <0x8005a000 0x2000>; interrupts = <110 69>; clock-frequency = <100000>; status = "disabled"; @@ -676,14 +676,14 @@ pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <8>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index de065b5..cd86177 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -53,7 +53,7 @@ spi-max-frequency = <6000000>; reg = <0>; interrupt-parent = <&gpio1>; - interrupts = <8>; + interrupts = <8 0x4>; regulators { sw1_reg: sw1 { diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 5b8eafc..da895e9 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -64,12 +64,32 @@ reg = <0xf4000000 0x2000000>; phy-mode = "mii"; interrupt-parent = <&gpio2>; - interrupts = <31>; + interrupts = <31 0x8>; reg-io-width = <4>; + /* + * VDD33A and VDDVARIO of LAN9220 are supplied by + * SW4_3V3 of LTC3589. Before the regulator driver + * for this PMIC is available, we use a fixed dummy + * 3V3 regulator to get LAN9220 driver probing work. + */ + vdd33a-supply = <®_3p3v>; + vddvario-supply = <®_3p3v>; smsc,irq-push-pull; }; }; + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index d42e851..72f30f3 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -53,6 +53,7 @@ fsl,pins = < 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ >; }; }; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 3b2f351..d351b27 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -66,6 +66,7 @@ vcxio: regulator@8 { compatible = "ti,twl6030-vcxio"; + regulator-always-on; }; vusb: regulator@9 { @@ -74,10 +75,12 @@ v1v8: regulator@10 { compatible = "ti,twl6030-v1v8"; + regulator-always-on; }; v2v1: regulator@11 { compatible = "ti,twl6030-v2v1"; + regulator-always-on; }; clk32kg: regulator@12 { diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index f725b96..3c9f32f 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -192,6 +192,7 @@ CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y +CONFIG_MXS_DMA=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index ccdb635..4edcfb4 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -34,7 +34,6 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_NET=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 1d24f84..71277a1 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -7,7 +7,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_KALLSYMS is not set -# CONFIG_BUG is not set +# CONFIG_BUGVERBOSE is not set # CONFIG_ELF_CORE is not set # CONFIG_SHMEM is not set CONFIG_SLOB=y diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 5de69f2..f6b9fc7 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -162,38 +162,6 @@ static void __init davinci_ntosd2_map_io(void) dm644x_init(); } -/* - I2C initialization -*/ -static struct davinci_i2c_platform_data ntosd2_i2c_pdata = { - .bus_freq = 20 /* kHz */, - .bus_delay = 100 /* usec */, -}; - -static struct i2c_board_info __initdata ntosd2_i2c_info[] = { -}; - -static int ntosd2_init_i2c(void) -{ - int status; - - davinci_init_i2c(&ntosd2_i2c_pdata); - status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type); - if (status == 0) { - status = gpio_direction_input(NTOSD2_MSP430_IRQ); - if (status == 0) { - status = gpio_to_irq(NTOSD2_MSP430_IRQ); - if (status > 0) { - ntosd2_i2c_info[0].irq = status; - i2c_register_board_info(1, - ntosd2_i2c_info, - ARRAY_SIZE(ntosd2_i2c_info)); - } - } - } - return status; -} - static struct davinci_mmc_config davinci_ntosd2_mmc_config = { .wires = 4, .version = MMC_CTLR_VERSION_1 @@ -218,7 +186,6 @@ static __init void davinci_ntosd2_init(void) { struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; - int status; aemif_clk = clk_get(NULL, "aemif"); clk_enable(aemif_clk); @@ -242,12 +209,6 @@ static __init void davinci_ntosd2_init(void) platform_add_devices(davinci_ntosd2_devices, ARRAY_SIZE(davinci_ntosd2_devices)); - /* Initialize I2C interface specific for this board */ - status = ntosd2_init_i2c(); - if (status < 0) - pr_warning("davinci_ntosd2_init: msp430 irq setup failed:" - " %d\n", status); - davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_ntosd2_snd_data); diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 373c3c0..c0bc83a 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -115,7 +115,7 @@ static __init int exynos_pm_dt_parse_domains(void) } #endif /* CONFIG_OF */ -static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, +static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, struct exynos_pm_domain *pd) { if (pdev->dev.bus) { diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 7aa6313..f69ca46 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -223,7 +223,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0"); - clk_register_clkdev(clk[csi_ahb_gate], NULL, "mx2-camera.0"); + clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0"); clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc"); @@ -250,8 +250,10 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1"); clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0"); clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad"); - clk_register_clkdev(clk[emma_ahb_gate], "ahb", "imx-emma"); - clk_register_clkdev(clk[emma_ipg_gate], "ipg", "imx-emma"); + clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0"); + clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0"); clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL); clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL); clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index 8e19e70..1253af2 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -130,7 +130,7 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0"); clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); - clk_register_clkdev(clk[kpp_gate], "kpp", NULL); + clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0"); clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index f608669..4bdcaa9 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -303,6 +303,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_prepare_enable(clk[aips_tz2]); /* fec */ clk_prepare_enable(clk[spba]); clk_prepare_enable(clk[emi_fast_gate]); /* fec */ + clk_prepare_enable(clk[emi_slow_gate]); /* eim */ clk_prepare_enable(clk[tmax1]); clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */ clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */ diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index ebf680b..3fa6c51 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/export.h> #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/irq.h> diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 7b1055c..3b22675 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -456,7 +456,7 @@ static void __init ap_init_timer(void) clk = clk_get_sys("ap_timer", NULL); BUG_ON(IS_ERR(clk)); - clk_enable(clk); + clk_prepare_enable(clk); rate = clk_get_rate(clk); writel(0, TIMER0_VA_BASE + TIMER_CTRL); diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index e2ad358..a13299d 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -10,5 +10,5 @@ dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb -dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb -dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 62b53d7..a9bc841 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -37,7 +37,7 @@ #define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) #define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) -static void __init __iomem *win_cfg_base(int win) +static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) { /* * Find the control register base address for this window. diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index ccdf83b..9a8bbda 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -2,9 +2,6 @@ if ARCH_MXS source "arch/arm/mach-mxs/devices/Kconfig" -config MXS_OCOTP - bool - config SOC_IMX23 bool select ARM_AMBA @@ -66,7 +63,6 @@ config MACH_MX28EVK select MXS_HAVE_PLATFORM_MXS_SAIF select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_RTC_STMP3XXX - select MXS_OCOTP help Include support for MX28EVK platform. This includes specific configurations for the board and its peripherals. @@ -94,7 +90,6 @@ config MODULE_M28 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB - select MXS_OCOTP config MODULE_APX4 bool @@ -106,7 +101,6 @@ config MODULE_APX4 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXS_SAIF - select MXS_OCOTP config MACH_TX28 bool "Ka-Ro TX28 module" diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index e41590c..fed3695 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,7 +1,6 @@ # Common support -obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o +obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o -obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd2db02..4a4d058 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -69,6 +69,7 @@ config SOC_OMAP5 select CPU_V7 select ARM_GIC select HAVE_SMP + select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" depends on ARCH_OMAP2 diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 7491529..2821448 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = { #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */ + OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ef230a0..0d362e9 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -58,6 +58,7 @@ #include "hsmmc.h" #include "common-board-devices.h" +#define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 #define OMAP3_EVM_EHCI_SELECT 61 diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 1473474..c187586 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, }; -/* - * ADS7846 driver maybe request a gpio according to the value - * of pdata->get_pendown_state, but we have done this. So set - * get_pendown_state to avoid twice gpio requesting. - */ -static int omap3_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_EVM_TS_GPIO); -} - static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = { .debounce_rep = 1, .gpio_pendown = -EINVAL, .keep_vref_on = 1, - .get_pendown_state = &omap3_get_pendown_state, }; static struct spi_board_info ads7846_spi_board_info __initdata = { diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 4c4ef6a..a0b4a428 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -4,7 +4,6 @@ #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K -#define OMAP3_EVM_TS_GPIO 175 struct mtd_partition; struct ads7846_platform_data; diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 471e62a7..76f9b3c 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -127,7 +127,6 @@ struct omap_mux_partition { * @gpio: GPIO number * @muxnames: available signal modes for a ball * @balls: available balls on the package - * @partition: mux partition */ struct omap_mux { u16 reg_offset; diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index 2293ba2..c95415d 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -94,7 +94,7 @@ int __init omap4_opp_init(void) { int r = -ENODEV; - if (!cpu_is_omap44xx()) + if (!cpu_is_omap443x()) return r; r = omap_init_opp_table(omap44xx_opp_def_list, diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index e4fc88c..05bd8f0 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -272,21 +272,16 @@ void omap_sram_idle(void) per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(mpu_pwrdm); - pwrdm_pre_transition(neon_pwrdm); - } + pwrdm_pre_transition(NULL); /* PER */ if (per_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(per_pwrdm); per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(core_pwrdm); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); @@ -339,20 +334,14 @@ void omap_sram_idle(void) omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); - pwrdm_post_transition(core_pwrdm); } omap3_intc_resume_idle(); + pwrdm_post_transition(NULL); + /* PER */ - if (per_next_state < PWRDM_POWER_ON) { + if (per_next_state < PWRDM_POWER_ON) omap2_gpio_resume_after_idle(); - pwrdm_post_transition(per_pwrdm); - } - - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_post_transition(mpu_pwrdm); - pwrdm_post_transition(neon_pwrdm); - } } static void omap3_pm_idle(void) diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9f6b83d..91e71d8 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -56,9 +56,13 @@ ppa_por_params: * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. * It returns to the caller for CPU INACTIVE and ON power states or in case * CPU failed to transition to targeted OFF/DORMANT state. + * + * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save + * stack frame and it expects the caller to take care of it. Hence the entire + * stack frame is saved to avoid possible stack corruption. */ ENTRY(omap4_finish_suspend) - stmfd sp!, {lr} + stmfd sp!, {r4-r12, lr} cmp r0, #0x0 beq do_WFI @ No lowpower state, jump to WFI @@ -226,7 +230,7 @@ scu_gp_clear: skip_scu_gp_clear: isb dsb - ldmfd sp!, {pc} + ldmfd sp!, {r4-r12, pc} ENDPROC(omap4_finish_suspend) /* diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index de47f17..db5ff66 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) { + omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(pmic_i2c_board_info.type, pmic_type, sizeof(pmic_i2c_board_info.type)); pmic_i2c_board_info.irq = pmic_irq; diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 5905ed1..d89d87ae 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -953,12 +953,12 @@ static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = { static struct eeti_ts_platform_data eeti_ts_pdata = { .irq_active_high = 1, + .irq_gpio = GPIO_TOUCH_IRQ, }; static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { .type = "eeti_ts", .addr = 0x0a, - .irq = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), .platform_data = &eeti_ts_pdata, }; diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index e249611..d56b0f7 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -483,7 +483,7 @@ config MACH_NEO1973_GTA02 select I2C select POWER_SUPPLY select MACH_NEO1973 - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_USB_HOST help Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone @@ -493,7 +493,7 @@ config MACH_RX1950 select S3C24XX_DCLK select PM_H1940 if PM select I2C - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_NAND select S3C2410_IOTIMING if S3C2440_CPUFREQ select S3C2440_XTAL_16934400 diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c index 6a23524..f8e4723 100644 --- a/arch/arm/mach-sa1100/leds-hackkit.c +++ b/arch/arm/mach-sa1100/leds-hackkit.c @@ -10,6 +10,7 @@ * as cpu led, the green one is used as timer led. */ #include <linux/init.h> +#include <linux/io.h> #include <mach/hardware.h> #include <asm/leds.h> diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index 8fd387b..b7344be 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -51,7 +51,7 @@ static struct regulator_init_data ldo0_data = { .consumer_supplies = tps658621_ldo0_supply, }; -#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv) \ +#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv, _on)\ static struct regulator_init_data _id##_data = { \ .supply_regulator = _supply, \ .constraints = { \ @@ -63,21 +63,22 @@ static struct regulator_init_data ldo0_data = { .valid_ops_mask = (REGULATOR_CHANGE_MODE | \ REGULATOR_CHANGE_STATUS | \ REGULATOR_CHANGE_VOLTAGE), \ + .always_on = _on, \ }, \ } -HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500); -HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500); -HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550); -HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500); -HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500); -HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475); -HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300); +HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500, 1); +HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500, 1); +HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550, 1); +HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500, 1); +HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500, 0); +HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475, 1); +HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300, 1); #define TPS_REG(_id, _data) \ { \ @@ -119,9 +120,10 @@ static struct i2c_board_info __initdata harmony_regulators[] = { int __init harmony_regulator_init(void) { + regulator_register_always_on(0, "vdd_sys", + NULL, 0, 5000000); + if (machine_is_harmony()) { - regulator_register_always_on(0, "vdd_sys", - NULL, 0, 5000000); i2c_register_board_info(3, harmony_regulators, 1); } else { /* Harmony, booted using device tree */ struct device_node *np; diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 626ad8c..938b50a 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer->reserved = 1; break; } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer request failed!\n", __func__); @@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) break; } } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer%d request failed!\n", __func__, id); @@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable); void omap_dm_timer_disable(struct omap_dm_timer *timer) { - pm_runtime_put(&timer->pdev->dev); + pm_runtime_put_sync(&timer->pdev->dev); } EXPORT_SYMBOL_GPL(omap_dm_timer_disable); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 68b180e..bb5d08a 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx()) + cpu_is_omap44xx() || soc_is_omap54xx() || \ + soc_is_am33xx()) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index 045e320..324d31b 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -108,4 +108,13 @@ # endif #endif +#ifdef CONFIG_SOC_AM33XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am33xx +# endif +#endif + #endif /* __PLAT_OMAP_MULTI_H */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index b8d19a1..7f7b112 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -110,7 +110,7 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ AM33XXUART##p) -static inline void __arch_decomp_setup(unsigned long arch_id) +static inline void arch_decomp_setup(void) { int port = 0; @@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) } while (0); } -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - /* * nothing to do */ diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 7aca31c..9c3b90c 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -403,7 +403,8 @@ config S5P_DEV_USB_EHCI config S3C24XX_PWM bool "PWM device support" - select HAVE_PWM + select PWM + select PWM_SAMSUNG help Support for exporting the PWM timer blocks via the pwm device system diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index d706bd0e..4fbdceb 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c @@ -160,7 +160,7 @@ static int __exit omap_rng_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int omap_rng_suspend(struct device *dev) { diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 17fa04d0..b47034e 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -218,7 +218,7 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) policy->cur = policy->min = policy->max = omap_getspeed(policy->cpu); - if (atomic_inc_return(&freq_table_users) == 1) + if (!freq_table) result = opp_init_cpufreq_table(mpu_dev, &freq_table); if (result) { @@ -227,6 +227,8 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) goto fail_ck; } + atomic_inc_return(&freq_table_users); + result = cpufreq_frequency_table_cpuinfo(policy, freq_table); if (result) goto fail_table; diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c index 150d976..ae37181 100644 --- a/drivers/gpio/gpio-em.c +++ b/drivers/gpio/gpio-em.c @@ -266,7 +266,7 @@ static int __devinit em_gio_irq_domain_init(struct em_gio_priv *p) return 0; } -static void __devexit em_gio_irq_domain_cleanup(struct em_gio_priv *p) +static void em_gio_irq_domain_cleanup(struct em_gio_priv *p) { struct gpio_em_config *pdata = p->pdev->dev.platform_data; diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c index 503c709..908407e 100644 --- a/drivers/input/touchscreen/eeti_ts.c +++ b/drivers/input/touchscreen/eeti_ts.c @@ -48,7 +48,7 @@ struct eeti_ts_priv { struct input_dev *input; struct work_struct work; struct mutex mutex; - int irq, irq_active_high; + int irq_gpio, irq, irq_active_high; }; #define EETI_TS_BITDEPTH (11) @@ -62,7 +62,7 @@ struct eeti_ts_priv { static inline int eeti_ts_irq_active(struct eeti_ts_priv *priv) { - return gpio_get_value(irq_to_gpio(priv->irq)) == priv->irq_active_high; + return gpio_get_value(priv->irq_gpio) == priv->irq_active_high; } static void eeti_ts_read(struct work_struct *work) @@ -157,7 +157,7 @@ static void eeti_ts_close(struct input_dev *dev) static int __devinit eeti_ts_probe(struct i2c_client *client, const struct i2c_device_id *idp) { - struct eeti_ts_platform_data *pdata; + struct eeti_ts_platform_data *pdata = client->dev.platform_data; struct eeti_ts_priv *priv; struct input_dev *input; unsigned int irq_flags; @@ -199,9 +199,12 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, priv->client = client; priv->input = input; - priv->irq = client->irq; + priv->irq_gpio = pdata->irq_gpio; + priv->irq = gpio_to_irq(pdata->irq_gpio); - pdata = client->dev.platform_data; + err = gpio_request_one(pdata->irq_gpio, GPIOF_IN, client->name); + if (err < 0) + goto err1; if (pdata) priv->irq_active_high = pdata->irq_active_high; @@ -215,13 +218,13 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, err = input_register_device(input); if (err) - goto err1; + goto err2; err = request_irq(priv->irq, eeti_ts_isr, irq_flags, client->name, priv); if (err) { dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); - goto err2; + goto err3; } /* @@ -233,9 +236,11 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, device_init_wakeup(&client->dev, 0); return 0; -err2: +err3: input_unregister_device(input); input = NULL; /* so we dont try to free it below */ +err2: + gpio_free(pdata->irq_gpio); err1: input_free_device(input); kfree(priv); diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index 383421b..683e18a 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -925,6 +925,7 @@ static int __init asic3_mfd_probe(struct platform_device *pdev, goto out; } + ret = 0; if (pdata->leds) { int i; diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c index 43a76c4..db662e2 100644 --- a/drivers/mfd/ezx-pcap.c +++ b/drivers/mfd/ezx-pcap.c @@ -202,7 +202,7 @@ static void pcap_isr_work(struct work_struct *work) } local_irq_enable(); ezx_pcap_write(pcap, PCAP_REG_MSR, pcap->msr); - } while (gpio_get_value(irq_to_gpio(pcap->spi->irq))); + } while (gpio_get_value(pdata->gpio)); } static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc) diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 31bb7e5..8ca4176 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -480,7 +480,7 @@ config MTD_NAND_NANDSIM config MTD_NAND_GPMI_NAND bool "GPMI NAND Flash Controller driver" - depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q) + depends on MTD_NAND && MXS_DMA help Enables NAND Flash support for IMX23 or IMX28. The GPMI controller is very powerful, with the help of BCH diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index e9309b3..ac4fd75 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1245,7 +1245,6 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) goto out_release_mem_region; } else { struct dma_slave_config cfg; - int rc; memset(&cfg, 0, sizeof(cfg)); cfg.src_addr = info->phys_base; @@ -1254,10 +1253,10 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; cfg.src_maxburst = 16; cfg.dst_maxburst = 16; - rc = dmaengine_slave_config(info->dma, &cfg); - if (rc) { + err = dmaengine_slave_config(info->dma, &cfg); + if (err) { dev_err(&pdev->dev, "DMA engine slave config failed: %d\n", - rc); + err); goto out_release_mem_region; } info->nand.read_buf = omap_read_buf_dma_pref; diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 646a7657..cfa2c35 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -826,7 +826,7 @@ static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata( struct spi_device *spi) { struct s3c64xx_spi_csinfo *cs; - struct device_node *slave_np, *data_np; + struct device_node *slave_np, *data_np = NULL; u32 fb_delay = 0; slave_np = spi->dev.of_node; diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index e7d75d2..f8b2d91 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -403,8 +403,6 @@ err0: static inline void usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) { - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - usb_remove_hcd(hcd); if (!IS_ERR_OR_NULL(hcd->phy)) { (void) otg_set_host(hcd->phy->otg, 0); diff --git a/include/linux/input/eeti_ts.h b/include/linux/input/eeti_ts.h index f875b31..16625d7 100644 --- a/include/linux/input/eeti_ts.h +++ b/include/linux/input/eeti_ts.h @@ -2,6 +2,7 @@ #define LINUX_INPUT_EETI_TS_H struct eeti_ts_platform_data { + int irq_gpio; unsigned int irq_active_high; }; diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h index 40c37216..32a1b5c 100644 --- a/include/linux/mfd/ezx-pcap.h +++ b/include/linux/mfd/ezx-pcap.h @@ -16,6 +16,7 @@ struct pcap_subdev { struct pcap_platform_data { unsigned int irq_base; unsigned int config; + int gpio; void (*init) (void *); /* board specific init */ int num_subdevs; struct pcap_subdev *subdevs; |
