diff options
-rw-r--r-- | Documentation/i2c/busses/i2c-i801 | 1 | ||||
-rw-r--r-- | drivers/i2c/busses/Kconfig | 6 | ||||
-rw-r--r-- | drivers/i2c/busses/Makefile | 5 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-designware-core.c | 11 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 3 | ||||
-rw-r--r-- | drivers/i2c/i2c-core.c | 22 |
6 files changed, 44 insertions, 4 deletions
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 615142d..157416e7 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -21,6 +21,7 @@ Supported adapters: * Intel DH89xxCC (PCH) * Intel Panther Point (PCH) * Intel Lynx Point (PCH) + * Intel Lynx Point-LP (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index b4aaa1b..970a161 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -104,6 +104,7 @@ config I2C_I801 DH89xxCC (PCH) Panther Point (PCH) Lynx Point (PCH) + Lynx Point-LP (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. @@ -354,9 +355,13 @@ config I2C_DAVINCI devices such as DaVinci NIC. For details please see http://www.ti.com/davinci +config I2C_DESIGNWARE_CORE + tristate + config I2C_DESIGNWARE_PLATFORM tristate "Synopsys DesignWare Platform" depends on HAVE_CLK + select I2C_DESIGNWARE_CORE help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. Only master mode is supported. @@ -367,6 +372,7 @@ config I2C_DESIGNWARE_PLATFORM config I2C_DESIGNWARE_PCI tristate "Synopsys DesignWare PCI" depends on PCI + select I2C_DESIGNWARE_CORE help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. Only master mode is supported. diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index ce3c2be..37c4182 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -33,10 +33,11 @@ obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o obj-$(CONFIG_I2C_CPM) += i2c-cpm.o obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o +obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o -i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o +i2c-designware-platform-objs := i2c-designware-platdrv.o obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o -i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o +i2c-designware-pci-objs := i2c-designware-pcidrv.o obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 1e48bec..7b8ebbe 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -25,6 +25,7 @@ * ---------------------------------------------------------------------------- * */ +#include <linux/export.h> #include <linux/clk.h> #include <linux/errno.h> #include <linux/err.h> @@ -316,6 +317,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev) dw_writel(dev, dev->master_cfg , DW_IC_CON); return 0; } +EXPORT_SYMBOL_GPL(i2c_dw_init); /* * Waiting for bus not busy @@ -568,12 +570,14 @@ done: return ret; } +EXPORT_SYMBOL_GPL(i2c_dw_xfer); u32 i2c_dw_func(struct i2c_adapter *adap) { struct dw_i2c_dev *dev = i2c_get_adapdata(adap); return dev->functionality; } +EXPORT_SYMBOL_GPL(i2c_dw_func); static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) { @@ -678,17 +682,20 @@ tx_aborted: return IRQ_HANDLED; } +EXPORT_SYMBOL_GPL(i2c_dw_isr); void i2c_dw_enable(struct dw_i2c_dev *dev) { /* Enable the adapter */ dw_writel(dev, 1, DW_IC_ENABLE); } +EXPORT_SYMBOL_GPL(i2c_dw_enable); u32 i2c_dw_is_enabled(struct dw_i2c_dev *dev) { return dw_readl(dev, DW_IC_ENABLE); } +EXPORT_SYMBOL_GPL(i2c_dw_is_enabled); void i2c_dw_disable(struct dw_i2c_dev *dev) { @@ -699,18 +706,22 @@ void i2c_dw_disable(struct dw_i2c_dev *dev) dw_writel(dev, 0, DW_IC_INTR_MASK); dw_readl(dev, DW_IC_CLR_INTR); } +EXPORT_SYMBOL_GPL(i2c_dw_disable); void i2c_dw_clear_int(struct dw_i2c_dev *dev) { dw_readl(dev, DW_IC_CLR_INTR); } +EXPORT_SYMBOL_GPL(i2c_dw_clear_int); void i2c_dw_disable_int(struct dw_i2c_dev *dev) { dw_writel(dev, 0, DW_IC_INTR_MASK); } +EXPORT_SYMBOL_GPL(i2c_dw_disable_int); u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev) { return dw_readl(dev, DW_IC_COMP_PARAM_1); } +EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param); diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 898dcf9..33e9b0c 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -52,6 +52,7 @@ DH89xxCC (PCH) 0x2330 32 hard yes yes yes Panther Point (PCH) 0x1e22 32 hard yes yes yes Lynx Point (PCH) 0x8c22 32 hard yes yes yes + Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes Features supported by this driver: Software PEC no @@ -155,6 +156,7 @@ #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 +#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22 struct i801_priv { struct i2c_adapter adapter; @@ -771,6 +773,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) }, { 0, } }; diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 2efa56c..2091ae8f 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -637,6 +637,22 @@ static void i2c_adapter_dev_release(struct device *dev) } /* + * This function is only needed for mutex_lock_nested, so it is never + * called unless locking correctness checking is enabled. Thus we + * make it inline to avoid a compiler warning. That's what gcc ends up + * doing anyway. + */ +static inline unsigned int i2c_adapter_depth(struct i2c_adapter *adapter) +{ + unsigned int depth = 0; + + while ((adapter = i2c_parent_is_i2c_adapter(adapter))) + depth++; + + return depth; +} + +/* * Let users instantiate I2C devices through sysfs. This can be used when * platform initialization code doesn't contain the proper data for * whatever reason. Also useful for drivers that do device detection and @@ -726,7 +742,8 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr, /* Make sure the device was added through sysfs */ res = -ENOENT; - mutex_lock(&adap->userspace_clients_lock); + mutex_lock_nested(&adap->userspace_clients_lock, + i2c_adapter_depth(adap)); list_for_each_entry_safe(client, next, &adap->userspace_clients, detected) { if (client->addr == addr) { @@ -1073,7 +1090,8 @@ int i2c_del_adapter(struct i2c_adapter *adap) return res; /* Remove devices instantiated from sysfs */ - mutex_lock(&adap->userspace_clients_lock); + mutex_lock_nested(&adap->userspace_clients_lock, + i2c_adapter_depth(adap)); list_for_each_entry_safe(client, next, &adap->userspace_clients, detected) { dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name, |