diff options
24 files changed, 747 insertions, 106 deletions
diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt index e2f494d..0d73ea5 100644 --- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt @@ -11,6 +11,7 @@ Required properties: - compatible: - "mediatek,mt8173-thermal" : For MT8173 family of SoCs - "mediatek,mt2701-thermal" : For MT2701 family of SoCs + - "mediatek,mt2712-thermal" : For MT2712 family of SoCs - reg: Address range of the thermal controller - interrupts: IRQ for the thermal controller - clocks, clock-names: Clocks needed for the thermal controller. required diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt index 43003ae..e3a6234 100644 --- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt @@ -4,6 +4,7 @@ Required properties: - compatible : should be "rockchip,<name>-tsadc" "rockchip,rk3228-tsadc": found on RK3228 SoCs "rockchip,rk3288-tsadc": found on RK3288 SoCs + "rockchip,rk3328-tsadc": found on RK3328 SoCs "rockchip,rk3368-tsadc": found on RK3368 SoCs "rockchip,rk3399-tsadc": found on RK3399 SoCs - reg : physical base address of the controller and length of memory mapped diff --git a/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt b/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt new file mode 100644 index 0000000..686c0b4 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/uniphier-thermal.txt @@ -0,0 +1,64 @@ +* UniPhier Thermal bindings + +This describes the devicetree bindings for thermal monitor supported by +PVT(Process, Voltage and Temperature) monitoring unit implemented on Socionext +UniPhier SoCs. + +Required properties: +- compatible : + - "socionext,uniphier-pxs2-thermal" : For UniPhier PXs2 SoC + - "socionext,uniphier-ld20-thermal" : For UniPhier LD20 SoC +- interrupts : IRQ for the temperature alarm +- #thermal-sensor-cells : Should be 0. See ./thermal.txt for details. + +Optional properties: +- socionext,tmod-calibration: A pair of calibrated values referred from PVT, + in case that the values aren't set on SoC, + like a reference board. + +Example: + + sysctrl@61840000 { + compatible = "socionext,uniphier-ld20-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x10000>; + ... + pvtctl: pvtctl { + compatible = "socionext,uniphier-ld20-thermal"; + interrupts = <0 3 1>; + #thermal-sensor-cells = <0>; + }; + ... + }; + + thermal-zones { + cpu_thermal { + polling-delay-passive = <250>; /* 250ms */ + polling-delay = <1000>; /* 1000ms */ + thermal-sensors = <&pvtctl>; + + trips { + cpu_crit: cpu_crit { + temperature = <110000>; /* 110C */ + hysteresis = <2000>; + type = "critical"; + }; + cpu_alert: cpu_alert { + temperature = <100000>; /* 100C */ + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = <&cpu0 (-1) (-1)>; + }; + map1 { + trip = <&cpu_alert>; + cooling-device = <&cpu2 (-1) (-1)>; + }; + }; + }; + }; diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index b5b5fac..07002df 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -342,7 +342,7 @@ config X86_PKG_TEMP_THERMAL config INTEL_SOC_DTS_IOSF_CORE tristate - depends on X86 + depends on X86 && PCI select IOSF_MBI help This is becoming a common feature for Intel SoCs to expose the additional @@ -352,7 +352,7 @@ config INTEL_SOC_DTS_IOSF_CORE config INTEL_SOC_DTS_THERMAL tristate "Intel SoCs DTS thermal driver" - depends on X86 + depends on X86 && PCI select INTEL_SOC_DTS_IOSF_CORE select THERMAL_WRITABLE_TRIPS help @@ -473,4 +473,12 @@ config ZX2967_THERMAL the primitive temperature sensor embedded in zx2967 SoCs. This sensor generates the real time die temperature. +config UNIPHIER_THERMAL + tristate "Socionext UniPhier thermal driver" + depends on ARCH_UNIPHIER || COMPILE_TEST + depends on THERMAL_OF && MFD_SYSCON + help + Enable this to plug in UniPhier on-chip PVT thermal driver into the + thermal framework. The driver supports CPU thermal zone temperature + reporting and a couple of trip points. endif diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 094d703..8b79bca 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -59,3 +59,4 @@ obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o +obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c index e6863c8..a4d6a0e 100644 --- a/drivers/thermal/broadcom/bcm2835_thermal.c +++ b/drivers/thermal/broadcom/bcm2835_thermal.c @@ -145,7 +145,7 @@ static void bcm2835_thermal_debugfs(struct platform_device *pdev) debugfs_create_regset32("regset", 0444, data->debugfsdir, regset); } -static struct thermal_zone_of_device_ops bcm2835_thermal_ops = { +static const struct thermal_zone_of_device_ops bcm2835_thermal_ops = { .get_temp = bcm2835_thermal_get_temp, }; diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 9c3ce34..bd3572c 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -206,7 +206,7 @@ static int hisi_thermal_get_temp(void *_sensor, int *temp) return 0; } -static struct thermal_zone_of_device_ops hisi_of_thermal_ops = { +static const struct thermal_zone_of_device_ops hisi_of_thermal_ops = { .get_temp = hisi_thermal_get_temp, }; diff --git a/drivers/thermal/int340x_thermal/acpi_thermal_rel.c b/drivers/thermal/int340x_thermal/acpi_thermal_rel.c index 51ceb80..c719167 100644 --- a/drivers/thermal/int340x_thermal/acpi_thermal_rel.c +++ b/drivers/thermal/int340x_thermal/acpi_thermal_rel.c @@ -228,7 +228,7 @@ static void get_single_name(acpi_handle handle, char *name) struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER}; if (ACPI_FAILURE(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer))) - pr_warn("Failed get name from handle\n"); + pr_warn("Failed to get device name from acpi handle\n"); else { memcpy(name, buffer.pointer, ACPI_NAME_SIZE); kfree(buffer.pointer); diff --git a/drivers/thermal/int340x_thermal/acpi_thermal_rel.h b/drivers/thermal/int340x_thermal/acpi_thermal_rel.h index f00700b..65075b1 100644 --- a/drivers/thermal/int340x_thermal/acpi_thermal_rel.h +++ b/drivers/thermal/int340x_thermal/acpi_thermal_rel.h @@ -34,10 +34,10 @@ struct trt { acpi_handle target; u64 influence; u64 sample_period; - u64 reverved1; - u64 reverved2; - u64 reverved3; - u64 reverved4; + u64 reserved1; + u64 reserved2; + u64 reserved3; + u64 reserved4; } __packed; #define ACPI_NR_ART_ELEMENTS 13 diff --git a/drivers/thermal/int340x_thermal/int3400_thermal.c b/drivers/thermal/int340x_thermal/int3400_thermal.c index a9ec94e..8ee38f5 100644 --- a/drivers/thermal/int340x_thermal/int3400_thermal.c +++ b/drivers/thermal/int340x_thermal/int3400_thermal.c @@ -16,6 +16,8 @@ #include <linux/thermal.h> #include "acpi_thermal_rel.h" +#define INT3400_THERMAL_TABLE_CHANGED 0x83 + enum int3400_thermal_uuid { INT3400_THERMAL_PASSIVE_1, INT3400_THERMAL_ACTIVE, @@ -104,7 +106,7 @@ static struct attribute *uuid_attrs[] = { NULL }; -static struct attribute_group uuid_attribute_group = { +static const struct attribute_group uuid_attribute_group = { .attrs = uuid_attrs, .name = "uuids" }; @@ -185,6 +187,35 @@ static int int3400_thermal_run_osc(acpi_handle handle, return result; } +static void int3400_notify(acpi_handle handle, + u32 event, + void *data) +{ + struct int3400_thermal_priv *priv = data; + char *thermal_prop[5]; + + if (!priv) + return; + + switch (event) { + case INT3400_THERMAL_TABLE_CHANGED: + thermal_prop[0] = kasprintf(GFP_KERNEL, "NAME=%s", + priv->thermal->type); + thermal_prop[1] = kasprintf(GFP_KERNEL, "TEMP=%d", + priv->thermal->temperature); + thermal_prop[2] = kasprintf(GFP_KERNEL, "TRIP="); + thermal_prop[3] = kasprintf(GFP_KERNEL, "EVENT=%d", + THERMAL_TABLE_CHANGED); + thermal_prop[4] = NULL; + kobject_uevent_env(&priv->thermal->device.kobj, KOBJ_CHANGE, + thermal_prop); + break; + default: + dev_err(&priv->adev->dev, "Unsupported event [0x%x]\n", event); + break; + } +} + static int int3400_thermal_get_temp(struct thermal_zone_device *thermal, int *temp) { @@ -290,6 +321,12 @@ static int int3400_thermal_probe(struct platform_device *pdev) if (result) goto free_zone; + result = acpi_install_notify_handler( + priv->adev->handle, ACPI_DEVICE_NOTIFY, int3400_notify, + (void *)priv); + if (result) + goto free_zone; + return 0; free_zone: @@ -306,6 +343,10 @@ static int int3400_thermal_remove(struct platform_device *pdev) { struct int3400_thermal_priv *priv = platform_get_drvdata(pdev); + acpi_remove_notify_handler( + priv->adev->handle, ACPI_DEVICE_NOTIFY, + int3400_notify); + if (!priv->rel_misc_dev_res) acpi_thermal_rel_misc_device_remove(priv->adev->handle); diff --git a/drivers/thermal/int340x_thermal/int3406_thermal.c b/drivers/thermal/int340x_thermal/int3406_thermal.c index 1891f34..f69ab02 100644 --- a/drivers/thermal/int340x_thermal/int3406_thermal.c +++ b/drivers/thermal/int340x_thermal/int3406_thermal.c @@ -21,39 +21,33 @@ struct int3406_thermal_data { int upper_limit; - int upper_limit_index; int lower_limit; - int lower_limit_index; acpi_handle handle; struct acpi_video_device_brightness *br; struct backlight_device *raw_bd; struct thermal_cooling_device *cooling_dev; }; -static int int3406_thermal_to_raw(int level, struct int3406_thermal_data *d) -{ - int max_level = d->br->levels[d->br->count - 1]; - int raw_max = d->raw_bd->props.max_brightness; - - return level * raw_max / max_level; -} - -static int int3406_thermal_to_acpi(int level, struct int3406_thermal_data *d) -{ - int raw_max = d->raw_bd->props.max_brightness; - int max_level = d->br->levels[d->br->count - 1]; - - return level * max_level / raw_max; -} +/* + * According to the ACPI spec, + * "Each brightness level is represented by a number between 0 and 100, + * and can be thought of as a percentage. For example, 50 can be 50% + * power consumption or 50% brightness, as defined by the OEM." + * + * As int3406 device uses this value to communicate with the native + * graphics driver, we make the assumption that it represents + * the percentage of brightness only + */ +#define ACPI_TO_RAW(v, d) (d->raw_bd->props.max_brightness * v / 100) +#define RAW_TO_ACPI(v, d) (v * 100 / d->raw_bd->props.max_brightness) static int int3406_thermal_get_max_state(struct thermal_cooling_device *cooling_dev, unsigned long *state) { struct int3406_thermal_data *d = cooling_dev->devdata; - int index = d->lower_limit_index ? d->lower_limit_index : 2; - *state = d->br->count - 1 - index; + *state = d->upper_limit - d->lower_limit; return 0; } @@ -62,19 +56,15 @@ int3406_thermal_set_cur_state(struct thermal_cooling_device *cooling_dev, unsigned long state) { struct int3406_thermal_data *d = cooling_dev->devdata; - int level, raw_level; + int acpi_level, raw_level; - if (state > d->br->count - 3) + if (state > d->upper_limit - d->lower_limit) return -EINVAL; - state = d->br->count - 1 - state; - level = d->br->levels[state]; + acpi_level = d->br->levels[d->upper_limit - state]; - if ((d->upper_limit && level > d->upper_limit) || - (d->lower_limit && level < d->lower_limit)) - return -EINVAL; + raw_level = ACPI_TO_RAW(acpi_level, d); - raw_level = int3406_thermal_to_raw(level, d); return backlight_device_set_brightness(d->raw_bd, raw_level); } @@ -83,27 +73,22 @@ int3406_thermal_get_cur_state(struct thermal_cooling_device *cooling_dev, unsigned long *state) { struct int3406_thermal_data *d = cooling_dev->devdata; - int raw_level, level, i; - int *levels = d->br->levels; + int acpi_level; + int index; - raw_level = d->raw_bd->props.brightness; - level = int3406_thermal_to_acpi(raw_level, d); + acpi_level = RAW_TO_ACPI(d->raw_bd->props.brightness, d); /* - * There is no 1:1 mapping between the firmware interface level with the - * raw interface level, we will have to find one that is close enough. + * There is no 1:1 mapping between the firmware interface level + * with the raw interface level, we will have to find one that is + * right above it. */ - for (i = 2; i < d->br->count; i++) { - if (level < levels[i]) { - if (i == 2) - break; - if ((level - levels[i - 1]) < (levels[i] - level)) - i--; + for (index = d->lower_limit; index < d->upper_limit; index++) { + if (acpi_level <= d->br->levels[index]) break; - } } - *state = d->br->count - 1 - i; + *state = d->upper_limit - index; return 0; } @@ -117,7 +102,7 @@ static int int3406_thermal_get_index(int *array, int nr, int value) { int i; - for (i = 0; i < nr; i++) { + for (i = 2; i < nr; i++) { if (array[i] == value) break; } @@ -128,27 +113,20 @@ static void int3406_thermal_get_limit(struct int3406_thermal_data *d) { acpi_status status; unsigned long long lower_limit, upper_limit; - int index; status = acpi_evaluate_integer(d->handle, "DDDL", NULL, &lower_limit); - if (ACPI_SUCCESS(status)) { - index = int3406_thermal_get_index(d->br->levels, d->br->count, - lower_limit); - if (index > 0) { - d->lower_limit = (int)lower_limit; - d->lower_limit_index = index; - } - } + if (ACPI_SUCCESS(status)) + d->lower_limit = int3406_thermal_get_index(d->br->levels, + d->br->count, lower_limit); status = acpi_evaluate_integer(d->handle, "DDPC", NULL, &upper_limit); - if (ACPI_SUCCESS(status)) { - index = int3406_thermal_get_index(d->br->levels, d->br->count, - upper_limit); - if (index > 0) { - d->upper_limit = (int)upper_limit; - d->upper_limit_index = index; - } - } + if (ACPI_SUCCESS(status)) + d->upper_limit = int3406_thermal_get_index(d->br->levels, + d->br->count, upper_limit); + + /* lower_limit and upper_limit should be always set */ + d->lower_limit = d->lower_limit > 0 ? d->lower_limit : 2; + d->upper_limit = d->upper_limit > 0 ? d->upper_limit : d->br->count - 1; } static void int3406_notify(acpi_handle handle, u32 event, void *data) diff --git a/drivers/thermal/int340x_thermal/processor_thermal_device.c b/drivers/thermal/int340x_thermal/processor_thermal_device.c index ff3b36f..f02341f 100644 --- a/drivers/thermal/int340x_thermal/processor_thermal_device.c +++ b/drivers/thermal/int340x_thermal/processor_thermal_device.c @@ -127,7 +127,7 @@ static struct attribute *power_limit_attrs[] = { NULL }; -static struct attribute_group power_limit_attribute_group = { +static const struct attribute_group power_limit_attribute_group = { .attrs = power_limit_attrs, .name = "power_limits" }; diff --git a/drivers/thermal/intel_pch_thermal.c b/drivers/thermal/intel_pch_thermal.c index 2b49e8d..c60b1cf 100644 --- a/drivers/thermal/intel_pch_thermal.c +++ b/drivers/thermal/intel_pch_thermal.c @@ -49,7 +49,7 @@ #define WPT_TSGPEN 0x84 /* General Purpose Event Enables */ /* Wildcat Point-LP PCH Thermal Register bit definitions */ -#define WPT_TEMP_TSR 0x00ff /* Temp TS Reading */ +#define WPT_TEMP_TSR 0x01ff /* Temp TS Reading */ #define WPT_TSC_CPDE 0x01 /* Catastrophic Power-Down Enable */ #define WPT_TSS_TSDSS 0x10 /* Thermal Sensor Dynamic Shutdown Status */ #define WPT_TSS_GPES 0x08 /* GPE status */ @@ -125,7 +125,7 @@ static int pch_wpt_init(struct pch_thermal_device *ptd, int *nr_trips) *nr_trips = 0; /* Check if BIOS has already enabled thermal sensor */ - if (WPT_TSS_TSDSS & readb(ptd->hw_base + WPT_TSS)) { + if (WPT_TSEL_ETS & readb(ptd->hw_base + WPT_TSEL)) { ptd->bios_enabled = true; goto read_trips; } @@ -141,7 +141,7 @@ static int pch_wpt_init(struct pch_thermal_device *ptd, int *nr_trips) } writeb(tsel|WPT_TSEL_ETS, ptd->hw_base + WPT_TSEL); - if (!(WPT_TSS_TSDSS & readb(ptd->hw_base + WPT_TSS))) { + if (!(WPT_TSEL_ETS & readb(ptd->hw_base + WPT_TSEL))) { dev_err(&ptd->pdev->dev, "Sensor can't be enabled\n"); return -ENODEV; } @@ -174,9 +174,9 @@ read_trips: static int pch_wpt_get_temp(struct pch_thermal_device *ptd, int *temp) { - u8 wpt_temp; + u16 wpt_temp; - wpt_temp = WPT_TEMP_TSR & readl(ptd->hw_base + WPT_TEMP); + wpt_temp = WPT_TEMP_TSR & readw(ptd->hw_base + WPT_TEMP); /* Resolution of 1/2 degree C and an offset of -50C */ *temp = (wpt_temp * 1000 / 2 - 50000); @@ -387,7 +387,7 @@ static int intel_pch_thermal_resume(struct device *device) return ptd->ops->resume(ptd); } -static struct pci_device_id intel_pch_thermal_id[] = { +static const struct pci_device_id intel_pch_thermal_id[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_1), .driver_data = board_hsw, }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_2), diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c index 7737f14..1e61c09 100644 --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -3,6 +3,7 @@ * Author: Hanyi Wu <hanyi.wu@mediatek.com> * Sascha Hauer <s.hauer@pengutronix.de> * Dawei Chien <dawei.chien@mediatek.com> + * Louis Yu <louis.yu@mediatek.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -111,9 +112,10 @@ /* * Layout of the fuses providing the calibration data - * These macros could be used for both MT8173 and MT2701. - * MT8173 has five sensors and need five VTS calibration data, - * and MT2701 has three sensors and need three VTS calibration data. + * These macros could be used for MT8173, MT2701, and MT2712. + * MT8173 has 5 sensors and needs 5 VTS calibration data. + * MT2701 has 3 sensors and needs 3 VTS calibration data. + * MT2712 has 4 sensors and needs 4 VTS calibration data. */ #define MT8173_CALIB_BUF0_VALID BIT(0) #define MT8173_CALIB_BUF1_ADC_GE(x) (((x) >> 22) & 0x3ff) @@ -124,6 +126,8 @@ #define MT8173_CALIB_BUF2_VTS_TSABB(x) (((x) >> 14) & 0x1ff) #define MT8173_CALIB_BUF0_DEGC_CALI(x) (((x) >> 1) & 0x3f) #define MT8173_CALIB_BUF0_O_SLOPE(x) (((x) >> 26) & 0x3f) +#define MT8173_CALIB_BUF0_O_SLOPE_SIGN(x) (((x) >> 7) & 0x1) +#define MT8173_CALIB_BUF1_ID(x) (((x) >> 9) & 0x1) /* MT2701 thermal sensors */ #define MT2701_TS1 0 @@ -136,11 +140,26 @@ /* The total number of temperature sensors in the MT2701 */ #define MT2701_NUM_SENSORS 3 -#define THERMAL_NAME "mtk-thermal" - /* The number of sensing points per bank */ #define MT2701_NUM_SENSORS_PER_ZONE 3 +/* MT2712 thermal sensors */ +#define MT2712_TS1 0 +#define MT2712_TS2 1 +#define MT2712_TS3 2 +#define MT2712_TS4 3 + +/* AUXADC channel 11 is used for the temperature sensors */ +#define MT2712_TEMP_AUXADC_CHANNEL 11 + +/* The total number of temperature sensors in the MT2712 */ +#define MT2712_NUM_SENSORS 4 + +/* The number of sensing points per bank */ +#define MT2712_NUM_SENSORS_PER_ZONE 4 + +#define THERMAL_NAME "mtk-thermal" + struct mtk_thermal; struct thermal_bank_cfg { @@ -215,6 +234,21 @@ static const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = { static const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 }; +/* MT2712 thermal sensor data */ +static const int mt2712_bank_data[MT2712_NUM_SENSORS] = { + MT2712_TS1, MT2712_TS2, MT2712_TS3, MT2712_TS4 +}; + +static const int mt2712_msr[MT2712_NUM_SENSORS_PER_ZONE] = { + TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3 +}; + +static const int mt2712_adcpnp[MT2712_NUM_SENSORS_PER_ZONE] = { + TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3 +}; + +static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 }; + /** * The MT8173 thermal controller has four banks. Each bank can read up to * four temperature sensors simultaneously. The MT8173 has a total of 5 @@ -278,6 +312,31 @@ static const struct mtk_thermal_data mt2701_thermal_data = { }; /** + * The MT2712 thermal controller has one bank, which can read up to + * four temperature sensors simultaneously. The MT2712 has a total of 4 + * temperature sensors. + * + * The thermal core only gets the maximum temperature of this one bank, + * so the bank concept wouldn't be necessary here. However, the SVS (Smart + * Voltage Scaling) unit makes its decisions based on the same bank + * data. + */ +static const struct mtk_thermal_data mt2712_thermal_data = { + .auxadc_channel = MT2712_TEMP_AUXADC_CHANNEL, + .num_banks = 1, + .num_sensors = MT2712_NUM_SENSORS, + .bank_data = { + { + .num_sensors = 4, + .sensors = mt2712_bank_data, + }, + }, + .msr = mt2712_msr, + .adcpnp = mt2712_adcpnp, + .sensor_mux_values = mt2712_mux_values, +}; + +/** * raw_to_mcelsius - convert a raw ADC value to mcelsius * @mt: The thermal controller * @raw: raw ADC value @@ -552,7 +611,11 @@ static int mtk_thermal_get_calibration_data(struct device *dev, mt->vts[MT8173_TS4] = MT8173_CALIB_BUF2_VTS_TS4(buf[2]); mt->vts[MT8173_TSABB] = MT8173_CALIB_BUF2_VTS_TSABB(buf[2]); mt->degc_cali = MT8173_CALIB_BUF0_DEGC_CALI(buf[0]); - mt->o_slope = MT8173_CALIB_BUF0_O_SLOPE(buf[0]); + if (MT8173_CALIB_BUF1_ID(buf[1]) & + MT8173_CALIB_BUF0_O_SLOPE_SIGN(buf[0])) + mt->o_slope = -MT8173_CALIB_BUF0_O_SLOPE(buf[0]); + else + mt->o_slope = MT8173_CALIB_BUF0_O_SLOPE(buf[0]); } else { dev_info(dev, "Device not calibrated, using default calibration values\n"); } @@ -571,6 +634,10 @@ static const struct of_device_id mtk_thermal_of_match[] = { { .compatible = "mediatek,mt2701-thermal", .data = (void *)&mt2701_thermal_data, + }, + { + .compatible = "mediatek,mt2712-thermal", + .data = (void *)&mt2712_thermal_data, }, { }, }; @@ -645,16 +712,16 @@ static int mtk_thermal_probe(struct platform_device *pdev) return -EINVAL; } + ret = device_reset(&pdev->dev); + if (ret) + return ret; + ret = clk_prepare_enable(mt->clk_auxadc); if (ret) { dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret); return ret; } - ret = device_reset(&pdev->dev); - if (ret) - goto err_disable_clk_auxadc; - ret = clk_prepare_enable(mt->clk_peri_therm); if (ret) { dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret); @@ -705,6 +772,7 @@ static struct platform_driver mtk_thermal_driver = { module_platform_driver(mtk_thermal_driver); +MODULE_AUTHOR("Louis Yu <louis.yu@mediatek.com>"); MODULE_AUTHOR("Dawei Chien <dawei.chien@mediatek.com>"); MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); MODULE_AUTHOR("Hanyi Wu <hanyi.wu@mediatek.com>"); diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c index 4362a69..c866cc1 100644 --- a/drivers/thermal/qoriq_thermal.c +++ b/drivers/thermal/qoriq_thermal.c @@ -188,7 +188,7 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) tmu_write(data, TMR_DISABLE, &data->regs->tmr); } -static struct thermal_zone_of_device_ops tmu_tz_ops = { +static const struct thermal_zone_of_device_ops tmu_tz_ops = { .get_temp = tmu_get_temp, }; diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c index 37fcefd..203aca4 100644 --- a/drivers/thermal/rcar_gen3_thermal.c +++ b/drivers/thermal/rcar_gen3_thermal.c @@ -225,7 +225,7 @@ static int rcar_gen3_thermal_set_trips(void *devdata, int low, int high) return 0; } -static struct thermal_zone_of_device_ops rcar_gen3_tz_of_ops = { +static const struct thermal_zone_of_device_ops rcar_gen3_tz_of_ops = { .get_temp = rcar_gen3_thermal_get_temp, .set_trips = rcar_gen3_thermal_set_trips, }; diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 4c77965..2060351 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -320,6 +320,44 @@ static const struct tsadc_table rk3288_code_table[] = { {0, 125000}, }; +static const struct tsadc_table rk3328_code_table[] = { + {0, -40000}, + {296, -40000}, + {304, -35000}, + {313, -30000}, + {331, -20000}, + {340, -15000}, + {349, -10000}, + {359, -5000}, + {368, 0}, + {378, 5000}, + {388, 10000}, + {398, 15000}, + {408, 20000}, + {418, 25000}, + {429, 30000}, + {440, 35000}, + {451, 40000}, + {462, 45000}, + {473, 50000}, + {485, 55000}, + {496, 60000}, + {508, 65000}, + {521, 70000}, + {533, 75000}, + {546, 80000}, + {559, 85000}, + {572, 90000}, + {586, 95000}, + {600, 100000}, + {614, 105000}, + {629, 110000}, + {644, 115000}, + {659, 120000}, + {675, 125000}, + {TSADCV2_DATA_MASK, 125000}, +}; + static const struct tsadc_table rk3368_code_table[] = { {0, -40000}, {106, -40000}, @@ -790,6 +828,29 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = { }, }; +static const struct rockchip_tsadc_chip rk3328_tsadc_data = { + .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */ + .chn_num = 1, /* one channels for tsadc */ + + .tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */ + .tshut_temp = 95000, + + .initialize = rk_tsadcv2_initialize, + .irq_ack = rk_tsadcv3_irq_ack, + .control = rk_tsadcv3_control, + .get_temp = rk_tsadcv2_get_temp, + .set_alarm_temp = rk_tsadcv2_alarm_temp, + .set_tshut_temp = rk_tsadcv2_tshut_temp, + .set_tshut_mode = rk_tsadcv2_tshut_mode, + + .table = { + .id = rk3328_code_table, + .length = ARRAY_SIZE(rk3328_code_table), + .data_mask = TSADCV2_DATA_MASK, + .mode = ADC_INCREMENT, + }, +}; + static const struct rockchip_tsadc_chip rk3366_tsadc_data = { .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */ .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */ @@ -875,6 +936,10 @@ static const struct of_device_id of_rockchip_thermal_match[] = { .data = (void *)&rk3288_tsadc_data, }, { + .compatible = "rockchip,rk3328-tsadc", + .data = (void *)&rk3328_tsadc_data, + }, + { .compatible = "rockchip,rk3366-tsadc", .data = (void *)&rk3366_tsadc_data, }, diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 7b8ef09..ed805c7 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -1286,7 +1286,7 @@ static int exynos_map_dt_data(struct platform_device *pdev) return 0; } -static struct thermal_zone_of_device_ops exynos_sensor_ops = { +static const struct thermal_zone_of_device_ops exynos_sensor_ops = { .get_temp = exynos_get_temp, .set_emul_temp = exynos_tmu_set_emulation, }; diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 5a51c74..2b1b0ba 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -390,7 +390,7 @@ static void handle_critical_trips(struct thermal_zone_device *tz, if (trip_type == THERMAL_TRIP_CRITICAL) { dev_emerg(&tz->device, - "critical temperature reached(%d C),shutting down\n", + "critical temperature reached (%d C), shutting down\n", tz->temperature / 1000); mutex_lock(&poweroff_lock); if (!power_off_triggered) { @@ -836,11 +836,7 @@ static void thermal_release(struct device *dev) if (!strncmp(dev_name(dev), "thermal_zone", sizeof("thermal_zone") - 1)) { tz = to_thermal_zone(dev); - kfree(tz->trip_type_attrs); - kfree(tz->trip_temp_attrs); - kfree(tz->trip_hyst_attrs); - kfree(tz->trips_attribute_group.attrs); - kfree(tz->device.groups); + thermal_zone_destroy_device_groups(tz); kfree(tz); } else if (!strncmp(dev_name(dev), "cooling_device", sizeof("cooling_device") - 1)) { @@ -1213,10 +1209,8 @@ thermal_zone_device_register(const char *type, int trips, int mask, ida_init(&tz->ida); mutex_init(&tz->lock); result = ida_simple_get(&thermal_tz_ida, 0, 0, GFP_KERNEL); - if (result < 0) { - kfree(tz); - return ERR_PTR(result); - } + if (result < 0) + goto free_tz; tz->id = result; strlcpy(tz->type, type, sizeof(tz->type)); @@ -1232,18 +1226,15 @@ thermal_zone_device_register(const char *type, int trips, int mask, /* Add nodes that are always present via .groups */ result = thermal_zone_create_device_groups(tz, mask); if (result) - goto unregister; + goto remove_id; /* A new thermal zone needs to be updated anyway. */ atomic_set(&tz->need_update, 1); dev_set_name(&tz->device, "thermal_zone%d", tz->id); result = device_register(&tz->device); - if (result) { - ida_simple_remove(&thermal_tz_ida, tz->id); - kfree(tz); - return ERR_PTR(result); - } + if (result) + goto remove_device_groups; for (count = 0; count < trips; count++) { if (tz->ops->get_trip_type(tz, count, &trip_type)) @@ -1297,6 +1288,14 @@ unregister: ida_simple_remove(&thermal_tz_ida, tz->id); device_unregister(&tz->device); return ERR_PTR(result); + +remove_device_groups: + thermal_zone_destroy_device_groups(tz); +remove_id: + ida_simple_remove(&thermal_tz_ida, tz->id); +free_tz: + kfree(tz); + return ERR_PTR(result); } EXPORT_SYMBOL_GPL(thermal_zone_device_register); diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index 2412b37..27e3b1d 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -71,6 +71,7 @@ int thermal_build_list_of_policies(char *buf); /* sysfs I/F */ int thermal_zone_create_device_groups(struct thermal_zone_device *, int); +void thermal_zone_destroy_device_groups(struct thermal_zone_device *); void thermal_cooling_device_setup_sysfs(struct thermal_cooling_device *); /* used only at binding time */ ssize_t diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c index a694de9..fb80c96 100644 --- a/drivers/thermal/thermal_sysfs.c +++ b/drivers/thermal/thermal_sysfs.c @@ -605,6 +605,24 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask) return 0; } +/** + * destroy_trip_attrs() - destroy attributes for trip points + * @tz: the thermal zone device + * + * helper function to free resources allocated by create_trip_attrs() + */ +static void destroy_trip_attrs(struct thermal_zone_device *tz) +{ + if (!tz) + return; + + kfree(tz->trip_type_attrs); + kfree(tz->trip_temp_attrs); + if (tz->ops->get_trip_hyst) + kfree(tz->trip_hyst_attrs); + kfree(tz->trips_attribute_group.attrs); +} + int thermal_zone_create_device_groups(struct thermal_zone_device *tz, int mask) { @@ -637,6 +655,17 @@ int thermal_zone_create_device_groups(struct thermal_zone_device *tz, return 0; } +void thermal_zone_destroy_device_groups(struct thermal_zone_device *tz) +{ + if (!tz) + return; + + if (tz->trips) + destroy_trip_attrs(tz); + + kfree(tz->device.groups); +} + /* sys I/F for cooling device */ static ssize_t thermal_cooling_device_type_show(struct device *dev, diff --git a/drivers/thermal/uniphier_thermal.c b/drivers/thermal/uniphier_thermal.c new file mode 100644 index 0000000..9570473 --- /dev/null +++ b/drivers/thermal/uniphier_thermal.c @@ -0,0 +1,384 @@ +/** + * uniphier_thermal.c - Socionext UniPhier thermal driver + * + * Copyright 2014 Panasonic Corporation + * Copyright 2016-2017 Socionext Inc. + * All rights reserved. + * + * Author: + * Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitops.h> +#include <linux/interrupt.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/thermal.h> + +#include "thermal_core.h" + +/* + * block registers + * addresses are the offset from .block_base + */ +#define PVTCTLEN 0x0000 +#define PVTCTLEN_EN BIT(0) + +#define PVTCTLMODE 0x0004 +#define PVTCTLMODE_MASK 0xf +#define PVTCTLMODE_TEMPMON 0x5 + +#define EMONREPEAT 0x0040 +#define EMONREPEAT_ENDLESS BIT(24) +#define EMONREPEAT_PERIOD GENMASK(3, 0) +#define EMONREPEAT_PERIOD_1000000 0x9 + +/* + * common registers + * addresses are the offset from .map_base + */ +#define PVTCTLSEL 0x0900 +#define PVTCTLSEL_MASK GENMASK(2, 0) +#define PVTCTLSEL_MONITOR 0 + +#define SETALERT0 0x0910 +#define SETALERT1 0x0914 +#define SETALERT2 0x0918 +#define SETALERT_TEMP_OVF (GENMASK(7, 0) << 16) +#define SETALERT_TEMP_OVF_VALUE(val) (((val) & GENMASK(7, 0)) << 16) +#define SETALERT_EN BIT(0) + +#define PMALERTINTCTL 0x0920 +#define PMALERTINTCTL_CLR(ch) BIT(4 * (ch) + 2) +#define PMALERTINTCTL_SET(ch) BIT(4 * (ch) + 1) +#define PMALERTINTCTL_EN(ch) BIT(4 * (ch) + 0) +#define PMALERTINTCTL_MASK (GENMASK(10, 8) | GENMASK(6, 4) | \ + GENMASK(2, 0)) + +#define TMOD 0x0928 +#define TMOD_WIDTH 9 + +#define TMODCOEF 0x0e5c + +#define TMODSETUP0_EN BIT(30) +#define TMODSETUP0_VAL(val) (((val) & GENMASK(13, 0)) << 16) +#define TMODSETUP1_EN BIT(15) +#define TMODSETUP1_VAL(val) ((val) & GENMASK(14, 0)) + +/* SoC critical temperature */ +#define CRITICAL_TEMP_LIMIT (120 * 1000) + +/* Max # of alert channels */ +#define ALERT_CH_NUM 3 + +/* SoC specific thermal sensor data */ +struct uniphier_tm_soc_data { + u32 map_base; + u32 block_base; + u32 tmod_setup_addr; +}; + +struct uniphier_tm_dev { + struct regmap *regmap; + struct device *dev; + bool alert_en[ALERT_CH_NUM]; + struct thermal_zone_device *tz_dev; + const struct uniphier_tm_soc_data *data; +}; + +static int uniphier_tm_initialize_sensor(struct uniphier_tm_dev *tdev) +{ + struct regmap *map = tdev->regmap; + u32 val; + u32 tmod_calib[2]; + int ret; + + /* stop PVT */ + regmap_write_bits(map, tdev->data->block_base + PVTCTLEN, + PVTCTLEN_EN, 0); + + /* + * Since SoC has a calibrated value that was set in advance, + * TMODCOEF shows non-zero and PVT refers the value internally. + * + * If TMODCOEF shows zero, the boards don't have the calibrated + * value, and the driver has to set default value from DT. + */ + ret = regmap_read(map, tdev->data->map_base + TMODCOEF, &val); + if (ret) + return ret; + if (!val) { + /* look for the default values in DT */ + ret = of_property_read_u32_array(tdev->dev->of_node, + "socionext,tmod-calibration", + tmod_calib, + ARRAY_SIZE(tmod_calib)); + if (ret) + return ret; + + regmap_write(map, tdev->data->tmod_setup_addr, + TMODSETUP0_EN | TMODSETUP0_VAL(tmod_calib[0]) | + TMODSETUP1_EN | TMODSETUP1_VAL(tmod_calib[1])); + } + + /* select temperature mode */ + regmap_write_bits(map, tdev->data->block_base + PVTCTLMODE, + PVTCTLMODE_MASK, PVTCTLMODE_TEMPMON); + + /* set monitoring period */ + regmap_write_bits(map, tdev->data->block_base + EMONREPEAT, + EMONREPEAT_ENDLESS | EMONREPEAT_PERIOD, + EMONREPEAT_ENDLESS | EMONREPEAT_PERIOD_1000000); + + /* set monitor mode */ + regmap_write_bits(map, tdev->data->map_base + PVTCTLSEL, + PVTCTLSEL_MASK, PVTCTLSEL_MONITOR); + + return 0; +} + +static void uniphier_tm_set_alert(struct uniphier_tm_dev *tdev, u32 ch, + u32 temp) +{ + struct regmap *map = tdev->regmap; + + /* set alert temperature */ + regmap_write_bits(map, tdev->data->map_base + SETALERT0 + (ch << 2), + SETALERT_EN | SETALERT_TEMP_OVF, + SETALERT_EN | + SETALERT_TEMP_OVF_VALUE(temp / 1000)); +} + +static void uniphier_tm_enable_sensor(struct uniphier_tm_dev *tdev) +{ + struct regmap *map = tdev->regmap; + int i; + u32 bits = 0; + + for (i = 0; i < ALERT_CH_NUM; i++) + if (tdev->alert_en[i]) + bits |= PMALERTINTCTL_EN(i); + + /* enable alert interrupt */ + regmap_write_bits(map, tdev->data->map_base + PMALERTINTCTL, + PMALERTINTCTL_MASK, bits); + + /* start PVT */ + regmap_write_bits(map, tdev->data->block_base + PVTCTLEN, + PVTCTLEN_EN, PVTCTLEN_EN); + + usleep_range(700, 1500); /* The spec note says at least 700us */ +} + +static void uniphier_tm_disable_sensor(struct uniphier_tm_dev *tdev) +{ + struct regmap *map = tdev->regmap; + + /* disable alert interrupt */ + regmap_write_bits(map, tdev->data->map_base + PMALERTINTCTL, + PMALERTINTCTL_MASK, 0); + + /* stop PVT */ + regmap_write_bits(map, tdev->data->block_base + PVTCTLEN, + PVTCTLEN_EN, 0); + + usleep_range(1000, 2000); /* The spec note says at least 1ms */ +} + +static int uniphier_tm_get_temp(void *data, int *out_temp) +{ + struct uniphier_tm_dev *tdev = data; + struct regmap *map = tdev->regmap; + int ret; + u32 temp; + + ret = regmap_read(map, tdev->data->map_base + TMOD, &temp); + if (ret) + return ret; + + /* MSB of the TMOD field is a sign bit */ + *out_temp = sign_extend32(temp, TMOD_WIDTH - 1) * 1000; + + return 0; +} + +static const struct thermal_zone_of_device_ops uniphier_of_thermal_ops = { + .get_temp = uniphier_tm_get_temp, +}; + +static void uniphier_tm_irq_clear(struct uniphier_tm_dev *tdev) +{ + u32 mask = 0, bits = 0; + int i; + + for (i = 0; i < ALERT_CH_NUM; i++) { + mask |= (PMALERTINTCTL_CLR(i) | PMALERTINTCTL_SET(i)); + bits |= PMALERTINTCTL_CLR(i); + } + + /* clear alert interrupt */ + regmap_write_bits(tdev->regmap, + tdev->data->map_base + PMALERTINTCTL, mask, bits); +} + +static irqreturn_t uniphier_tm_alarm_irq(int irq, void *_tdev) +{ + struct uniphier_tm_dev *tdev = _tdev; + + disable_irq_nosync(irq); + uniphier_tm_irq_clear(tdev); + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t uniphier_tm_alarm_irq_thread(int irq, void *_tdev) +{ + struct uniphier_tm_dev *tdev = _tdev; + + thermal_zone_device_update(tdev->tz_dev, THERMAL_EVENT_UNSPECIFIED); + + return IRQ_HANDLED; +} + +static int uniphier_tm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *regmap; + struct device_node *parent; + struct uniphier_tm_dev *tdev; + const struct thermal_trip *trips; + int i, ret, irq, ntrips, crit_temp = INT_MAX; + + tdev = devm_kzalloc(dev, sizeof(*tdev), GFP_KERNEL); + if (!tdev) + return -ENOMEM; + tdev->dev = dev; + + tdev->data = of_device_get_match_data(dev); + if (WARN_ON(!tdev->data)) + return -EINVAL; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + /* get regmap from syscon node */ + parent = of_get_parent(dev->of_node); /* parent should be syscon node */ + regmap = syscon_node_to_regmap(parent); + of_node_put(parent); + if (IS_ERR(regmap)) { + dev_err(dev, "failed to get regmap (error %ld)\n", + PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + tdev->regmap = regmap; + + ret = uniphier_tm_initialize_sensor(tdev); + if (ret) { + dev_err(dev, "failed to initialize sensor\n"); + return ret; + } + + ret = devm_request_threaded_irq(dev, irq, uniphier_tm_alarm_irq, + uniphier_tm_alarm_irq_thread, + 0, "thermal", tdev); + if (ret) + return ret; + + platform_set_drvdata(pdev, tdev); + + tdev->tz_dev = devm_thermal_zone_of_sensor_register(dev, 0, tdev, + &uniphier_of_thermal_ops); + if (IS_ERR(tdev->tz_dev)) { + dev_err(dev, "failed to register sensor device\n"); + return PTR_ERR(tdev->tz_dev); + } + + /* get trip points */ + trips = of_thermal_get_trip_points(tdev->tz_dev); + ntrips = of_thermal_get_ntrips(tdev->tz_dev); + if (ntrips > ALERT_CH_NUM) { + dev_err(dev, "thermal zone has too many trips\n"); + return -E2BIG; + } + + /* set alert temperatures */ + for (i = 0; i < ntrips; i++) { + if (trips[i].type == THERMAL_TRIP_CRITICAL && + trips[i].temperature < crit_temp) + crit_temp = trips[i].temperature; + uniphier_tm_set_alert(tdev, i, trips[i].temperature); + tdev->alert_en[i] = true; + } + if (crit_temp > CRITICAL_TEMP_LIMIT) { + dev_err(dev, "critical trip is over limit(>%d), or not set\n", + CRITICAL_TEMP_LIMIT); + return -EINVAL; + } + + uniphier_tm_enable_sensor(tdev); + + return 0; +} + +static int uniphier_tm_remove(struct platform_device *pdev) +{ + struct uniphier_tm_dev *tdev = platform_get_drvdata(pdev); + + /* disable sensor */ + uniphier_tm_disable_sensor(tdev); + + return 0; +} + +static const struct uniphier_tm_soc_data uniphier_pxs2_tm_data = { + .map_base = 0xe000, + .block_base = 0xe000, + .tmod_setup_addr = 0xe904, +}; + +static const struct uniphier_tm_soc_data uniphier_ld20_tm_data = { + .map_base = 0xe000, + .block_base = 0xe800, + .tmod_setup_addr = 0xe938, +}; + +static const struct of_device_id uniphier_tm_dt_ids[] = { + { + .compatible = "socionext,uniphier-pxs2-thermal", + .data = &uniphier_pxs2_tm_data, + }, + { + .compatible = "socionext,uniphier-ld20-thermal", + .data = &uniphier_ld20_tm_data, + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, uniphier_tm_dt_ids); + +static struct platform_driver uniphier_tm_driver = { + .probe = uniphier_tm_probe, + .remove = uniphier_tm_remove, + .driver = { + .name = "uniphier-thermal", + .of_match_table = uniphier_tm_dt_ids, + }, +}; +module_platform_driver(uniphier_tm_driver); + +MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>"); +MODULE_DESCRIPTION("UniPhier thermal driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/zx2967_thermal.c b/drivers/thermal/zx2967_thermal.c index a5670ad..6acce0b 100644 --- a/drivers/thermal/zx2967_thermal.c +++ b/drivers/thermal/zx2967_thermal.c @@ -111,7 +111,7 @@ unlock: return ret; } -static struct thermal_zone_of_device_ops zx2967_of_thermal_ops = { +static const struct thermal_zone_of_device_ops zx2967_of_thermal_ops = { .get_temp = zx2967_thermal_get_temp, }; diff --git a/include/linux/thermal.h b/include/linux/thermal.h index dab11f9..fd5b959 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -102,6 +102,7 @@ enum thermal_notify_event { THERMAL_DEVICE_DOWN, /* Thermal device is down */ THERMAL_DEVICE_UP, /* Thermal device is up after a down event */ THERMAL_DEVICE_POWER_CAPABILITY_CHANGED, /* power capability changed */ + THERMAL_TABLE_CHANGED, /* Thermal table(s) changed */ }; struct thermal_zone_device_ops { |
