summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/clock/ingenic,cgu.txt53
-rw-r--r--Documentation/devicetree/bindings/clock/qca,ath79-pll.txt33
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-ath79.txt38
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt28
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt44
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt30
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt35
-rw-r--r--Documentation/devicetree/bindings/mips/ath79-soc.txt21
-rw-r--r--Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt29
-rw-r--r--Documentation/devicetree/bindings/serial/ingenic,uart.txt22
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt3
-rw-r--r--MAINTAINERS14
-rw-r--r--arch/mips/Kbuild.platforms4
-rw-r--r--arch/mips/Kconfig163
-rw-r--r--arch/mips/alchemy/common/clock.c6
-rw-r--r--arch/mips/ath25/ar2315.c2
-rw-r--r--arch/mips/ath25/ar5312.c2
-rw-r--r--arch/mips/ath25/board.c2
-rw-r--r--arch/mips/ath79/Kconfig12
-rw-r--r--arch/mips/ath79/clock.c86
-rw-r--r--arch/mips/ath79/common.c35
-rw-r--r--arch/mips/ath79/common.h1
-rw-r--r--arch/mips/ath79/dev-common.c51
-rw-r--r--arch/mips/ath79/gpio.c79
-rw-r--r--arch/mips/ath79/irq.c200
-rw-r--r--arch/mips/ath79/machtypes.h1
-rw-r--r--arch/mips/ath79/setup.c30
-rw-r--r--arch/mips/bcm47xx/Kconfig1
-rw-r--r--arch/mips/bcm47xx/Makefile2
-rw-r--r--arch/mips/bcm47xx/board.c1
-rw-r--r--arch/mips/bcm47xx/buttons.c11
-rw-r--r--arch/mips/bcm47xx/leds.c14
-rw-r--r--arch/mips/bcm47xx/prom.c2
-rw-r--r--arch/mips/bcm47xx/setup.c3
-rw-r--r--arch/mips/bcm47xx/sprom.c106
-rw-r--r--arch/mips/bmips/Kconfig4
-rw-r--r--arch/mips/bmips/setup.c2
-rw-r--r--arch/mips/boot/compressed/head.S16
-rw-r--r--arch/mips/boot/compressed/ld.script6
-rw-r--r--arch/mips/boot/compressed/uart-16550.c2
-rw-r--r--arch/mips/boot/dts/Makefile2
-rw-r--r--arch/mips/boot/dts/brcm/Makefile14
-rw-r--r--arch/mips/boot/dts/brcm/bcm7346.dtsi26
-rw-r--r--arch/mips/boot/dts/brcm/bcm7358.dtsi26
-rw-r--r--arch/mips/boot/dts/brcm/bcm7360.dtsi26
-rw-r--r--arch/mips/boot/dts/brcm/bcm7362.dtsi26
-rw-r--r--arch/mips/boot/dts/brcm/bcm7435.dtsi239
-rw-r--r--arch/mips/boot/dts/brcm/bcm97346dbsmb.dts8
-rw-r--r--arch/mips/boot/dts/brcm/bcm97358svmb.dts8
-rw-r--r--arch/mips/boot/dts/brcm/bcm97360svmb.dts8
-rw-r--r--arch/mips/boot/dts/brcm/bcm97362svmb.dts8
-rw-r--r--arch/mips/boot/dts/brcm/bcm97435svmb.dts60
-rw-r--r--arch/mips/boot/dts/ingenic/Makefile10
-rw-r--r--arch/mips/boot/dts/ingenic/ci20.dts44
-rw-r--r--arch/mips/boot/dts/ingenic/jz4740.dtsi68
-rw-r--r--arch/mips/boot/dts/ingenic/jz4780.dtsi111
-rw-r--r--arch/mips/boot/dts/ingenic/qi_lb60.dts15
-rw-r--r--arch/mips/boot/dts/mti/Makefile1
-rw-r--r--arch/mips/boot/dts/mti/malta.dts7
-rw-r--r--arch/mips/boot/dts/qca/Makefile11
-rw-r--r--arch/mips/boot/dts/qca/ar9132.dtsi133
-rw-r--r--arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts112
-rw-r--r--arch/mips/cavium-octeon/octeon-irq.c4
-rw-r--r--arch/mips/cobalt/mtd.c3
-rw-r--r--arch/mips/configs/ci20_defconfig162
-rw-r--r--arch/mips/configs/fuloong2e_defconfig2
-rw-r--r--arch/mips/configs/lemote2f_defconfig2
-rw-r--r--arch/mips/configs/loongson3_defconfig2
-rw-r--r--arch/mips/configs/ls1b_defconfig2
-rw-r--r--arch/mips/configs/maltasmvp_defconfig17
-rw-r--r--arch/mips/configs/pistachio_defconfig1
-rw-r--r--arch/mips/configs/qi_lb60_defconfig3
-rw-r--r--arch/mips/include/asm/asmmacro.h11
-rw-r--r--arch/mips/include/asm/bitops.h2
-rw-r--r--arch/mips/include/asm/bmips-spaces.h7
-rw-r--r--arch/mips/include/asm/cpu-features.h3
-rw-r--r--arch/mips/include/asm/cpu-type.h2
-rw-r--r--arch/mips/include/asm/cpu.h7
-rw-r--r--arch/mips/include/asm/hazards.h52
-rw-r--r--arch/mips/include/asm/i8259.h1
-rw-r--r--arch/mips/include/asm/irqflags.h4
-rw-r--r--arch/mips/include/asm/kgdb.h1
-rw-r--r--arch/mips/include/asm/mach-ath79/ar71xx_regs.h12
-rw-r--r--arch/mips/include/asm/mach-ath79/ath79.h3
-rw-r--r--arch/mips/include/asm/mach-bcm47xx/bcm47xx.h4
-rw-r--r--arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h2
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/spaces.h2
-rw-r--r--arch/mips/include/asm/mach-bmips/spaces.h2
-rw-r--r--arch/mips/include/asm/mach-dec/cpu-feature-overrides.h16
-rw-r--r--arch/mips/include/asm/mach-generic/irq.h4
-rw-r--r--arch/mips/include/asm/mach-generic/spaces.h4
-rw-r--r--arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h92
-rw-r--r--arch/mips/include/asm/mach-jz4740/clock.h3
-rw-r--r--arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h3
-rw-r--r--arch/mips/include/asm/mach-jz4740/irq.h14
-rw-r--r--arch/mips/include/asm/mach-jz4740/platform.h2
-rw-r--r--arch/mips/include/asm/mach-loongson/workarounds.h7
-rw-r--r--arch/mips/include/asm/mach-loongson32/cpufreq.h (renamed from arch/mips/include/asm/mach-loongson1/cpufreq.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson32/irq.h (renamed from arch/mips/include/asm/mach-loongson1/irq.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson32/loongson1.h (renamed from arch/mips/include/asm/mach-loongson1/loongson1.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson32/platform.h (renamed from arch/mips/include/asm/mach-loongson1/platform.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson32/prom.h (renamed from arch/mips/include/asm/mach-loongson1/prom.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson32/regs-clk.h (renamed from arch/mips/include/asm/mach-loongson1/regs-clk.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson32/regs-mux.h (renamed from arch/mips/include/asm/mach-loongson1/regs-mux.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson32/regs-pwm.h (renamed from arch/mips/include/asm/mach-loongson1/regs-pwm.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson32/regs-wdt.h (renamed from arch/mips/include/asm/mach-loongson1/regs-wdt.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson64/boot_param.h (renamed from arch/mips/include/asm/mach-loongson/boot_param.h)4
-rw-r--r--arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h (renamed from arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson64/cs5536/cs5536.h (renamed from arch/mips/include/asm/mach-loongson/cs5536/cs5536.h)0
-rw-r--r--arch/mips/include/asm/mach-loongson64/cs5536/cs5536_mfgpt.h (renamed from arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h)0
-rw-r--r--arch/mips/include/asm/mach-loongson64/cs5536/cs5536_pci.h (renamed from arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h)0
-rw-r--r--arch/mips/include/asm/mach-loongson64/cs5536/cs5536_vsm.h (renamed from arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h)0
-rw-r--r--arch/mips/include/asm/mach-loongson64/dma-coherence.h (renamed from arch/mips/include/asm/mach-loongson/dma-coherence.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson64/gpio.h (renamed from arch/mips/include/asm/mach-loongson/gpio.h)0
-rw-r--r--arch/mips/include/asm/mach-loongson64/irq.h (renamed from arch/mips/include/asm/mach-loongson/irq.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson64/kernel-entry-init.h (renamed from arch/mips/include/asm/mach-loongson/kernel-entry-init.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson64/loongson.h (renamed from arch/mips/include/asm/mach-loongson/loongson.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson64/loongson_hwmon.h (renamed from arch/mips/include/asm/mach-loongson/loongson_hwmon.h)0
-rw-r--r--arch/mips/include/asm/mach-loongson64/machine.h (renamed from arch/mips/include/asm/mach-loongson/machine.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson64/mc146818rtc.h (renamed from arch/mips/include/asm/mach-loongson/mc146818rtc.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson64/mem.h (renamed from arch/mips/include/asm/mach-loongson/mem.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson64/mmzone.h (renamed from arch/mips/include/asm/mach-loongson/mmzone.h)0
-rw-r--r--arch/mips/include/asm/mach-loongson64/pci.h (renamed from arch/mips/include/asm/mach-loongson/pci.h)6
-rw-r--r--arch/mips/include/asm/mach-loongson64/spaces.h (renamed from arch/mips/include/asm/mach-loongson/spaces.h)4
-rw-r--r--arch/mips/include/asm/mach-loongson64/topology.h (renamed from arch/mips/include/asm/mach-loongson/topology.h)0
-rw-r--r--arch/mips/include/asm/mach-loongson64/workarounds.h7
-rw-r--r--arch/mips/include/asm/mips-cm.h5
-rw-r--r--arch/mips/include/asm/mipsregs.h35
-rw-r--r--arch/mips/include/asm/pgtable-32.h2
-rw-r--r--arch/mips/include/asm/prom.h2
-rw-r--r--arch/mips/include/asm/spinlock.h4
-rw-r--r--arch/mips/include/asm/txx9irq.h2
-rw-r--r--arch/mips/include/asm/uaccess.h47
-rw-r--r--arch/mips/include/asm/xtalk/xwidget.h112
-rw-r--r--arch/mips/jz4740/Kconfig17
-rw-r--r--arch/mips/jz4740/Makefile8
-rw-r--r--arch/mips/jz4740/Platform8
-rw-r--r--arch/mips/jz4740/board-qi_lb60.c7
-rw-r--r--arch/mips/jz4740/clock-debugfs.c108
-rw-r--r--arch/mips/jz4740/clock.c924
-rw-r--r--arch/mips/jz4740/clock.h76
-rw-r--r--arch/mips/jz4740/gpio.c7
-rw-r--r--arch/mips/jz4740/irq.c162
-rw-r--r--arch/mips/jz4740/platform.c38
-rw-r--r--arch/mips/jz4740/pm.c2
-rw-r--r--arch/mips/jz4740/prom.c13
-rw-r--r--arch/mips/jz4740/reset.c13
-rw-r--r--arch/mips/jz4740/serial.c33
-rw-r--r--arch/mips/jz4740/serial.h23
-rw-r--r--arch/mips/jz4740/setup.c36
-rw-r--r--arch/mips/jz4740/time.c19
-rw-r--r--arch/mips/kernel/Makefile2
-rw-r--r--arch/mips/kernel/cpu-probe.c12
-rw-r--r--arch/mips/kernel/head.S16
-rw-r--r--arch/mips/kernel/i8259.c43
-rw-r--r--arch/mips/kernel/irq.c52
-rw-r--r--arch/mips/kernel/kgdb.c4
-rw-r--r--arch/mips/kernel/prom.c1
-rw-r--r--arch/mips/kernel/sysrq.c77
-rw-r--r--arch/mips/kernel/traps.c12
-rw-r--r--arch/mips/kernel/vmlinux.lds.S8
-rw-r--r--arch/mips/lib/dump_tlb.c110
-rw-r--r--arch/mips/lib/r3k_dump_tlb.c15
-rw-r--r--arch/mips/loongson32/Kconfig (renamed from arch/mips/loongson1/Kconfig)6
-rw-r--r--arch/mips/loongson32/Makefile (renamed from arch/mips/loongson1/Makefile)2
-rw-r--r--arch/mips/loongson32/Platform (renamed from arch/mips/loongson1/Platform)4
-rw-r--r--arch/mips/loongson32/common/Makefile (renamed from arch/mips/loongson1/common/Makefile)0
-rw-r--r--arch/mips/loongson32/common/irq.c (renamed from arch/mips/loongson1/common/irq.c)0
-rw-r--r--arch/mips/loongson32/common/platform.c (renamed from arch/mips/loongson1/common/platform.c)0
-rw-r--r--arch/mips/loongson32/common/prom.c (renamed from arch/mips/loongson1/common/prom.c)0
-rw-r--r--arch/mips/loongson32/common/reset.c (renamed from arch/mips/loongson1/common/reset.c)0
-rw-r--r--arch/mips/loongson32/common/setup.c (renamed from arch/mips/loongson1/common/setup.c)0
-rw-r--r--arch/mips/loongson32/common/time.c (renamed from arch/mips/loongson1/common/time.c)0
-rw-r--r--arch/mips/loongson32/ls1b/Makefile (renamed from arch/mips/loongson1/ls1b/Makefile)0
-rw-r--r--arch/mips/loongson32/ls1b/board.c (renamed from arch/mips/loongson1/ls1b/board.c)0
-rw-r--r--arch/mips/loongson64/Kconfig (renamed from arch/mips/loongson/Kconfig)10
-rw-r--r--arch/mips/loongson64/Makefile (renamed from arch/mips/loongson/Makefile)2
-rw-r--r--arch/mips/loongson64/Platform (renamed from arch/mips/loongson/Platform)4
-rw-r--r--arch/mips/loongson64/common/Makefile (renamed from arch/mips/loongson/common/Makefile)0
-rw-r--r--arch/mips/loongson64/common/bonito-irq.c (renamed from arch/mips/loongson/common/bonito-irq.c)0
-rw-r--r--arch/mips/loongson64/common/cmdline.c (renamed from arch/mips/loongson/common/cmdline.c)0
-rw-r--r--arch/mips/loongson64/common/cs5536/Makefile (renamed from arch/mips/loongson/common/cs5536/Makefile)0
-rw-r--r--arch/mips/loongson64/common/cs5536/cs5536_acc.c (renamed from arch/mips/loongson/common/cs5536/cs5536_acc.c)0
-rw-r--r--arch/mips/loongson64/common/cs5536/cs5536_ehci.c (renamed from arch/mips/loongson/common/cs5536/cs5536_ehci.c)0
-rw-r--r--arch/mips/loongson64/common/cs5536/cs5536_ide.c (renamed from arch/mips/loongson/common/cs5536/cs5536_ide.c)0
-rw-r--r--arch/mips/loongson64/common/cs5536/cs5536_isa.c (renamed from arch/mips/loongson/common/cs5536/cs5536_isa.c)0
-rw-r--r--arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c (renamed from arch/mips/loongson/common/cs5536/cs5536_mfgpt.c)0
-rw-r--r--arch/mips/loongson64/common/cs5536/cs5536_ohci.c (renamed from arch/mips/loongson/common/cs5536/cs5536_ohci.c)0
-rw-r--r--arch/mips/loongson64/common/cs5536/cs5536_pci.c (renamed from arch/mips/loongson/common/cs5536/cs5536_pci.c)0
-rw-r--r--arch/mips/loongson64/common/dma-swiotlb.c (renamed from arch/mips/loongson/common/dma-swiotlb.c)0
-rw-r--r--arch/mips/loongson64/common/early_printk.c (renamed from arch/mips/loongson/common/early_printk.c)0
-rw-r--r--arch/mips/loongson64/common/env.c (renamed from arch/mips/loongson/common/env.c)0
-rw-r--r--arch/mips/loongson64/common/init.c (renamed from arch/mips/loongson/common/init.c)0
-rw-r--r--arch/mips/loongson64/common/irq.c (renamed from arch/mips/loongson/common/irq.c)0
-rw-r--r--arch/mips/loongson64/common/machtype.c (renamed from arch/mips/loongson/common/machtype.c)0
-rw-r--r--arch/mips/loongson64/common/mem.c (renamed from arch/mips/loongson/common/mem.c)0
-rw-r--r--arch/mips/loongson64/common/pci.c (renamed from arch/mips/loongson/common/pci.c)0
-rw-r--r--arch/mips/loongson64/common/platform.c (renamed from arch/mips/loongson/common/platform.c)0
-rw-r--r--arch/mips/loongson64/common/pm.c (renamed from arch/mips/loongson/common/pm.c)0
-rw-r--r--arch/mips/loongson64/common/reset.c (renamed from arch/mips/loongson/common/reset.c)0
-rw-r--r--arch/mips/loongson64/common/rtc.c (renamed from arch/mips/loongson/common/rtc.c)0
-rw-r--r--arch/mips/loongson64/common/serial.c (renamed from arch/mips/loongson/common/serial.c)9
-rw-r--r--arch/mips/loongson64/common/setup.c (renamed from arch/mips/loongson/common/setup.c)0
-rw-r--r--arch/mips/loongson64/common/time.c (renamed from arch/mips/loongson/common/time.c)0
-rw-r--r--arch/mips/loongson64/common/uart_base.c (renamed from arch/mips/loongson/common/uart_base.c)0
-rw-r--r--arch/mips/loongson64/fuloong-2e/Makefile (renamed from arch/mips/loongson/fuloong-2e/Makefile)0
-rw-r--r--arch/mips/loongson64/fuloong-2e/irq.c (renamed from arch/mips/loongson/fuloong-2e/irq.c)0
-rw-r--r--arch/mips/loongson64/fuloong-2e/reset.c (renamed from arch/mips/loongson/fuloong-2e/reset.c)0
-rw-r--r--arch/mips/loongson64/lemote-2f/Makefile (renamed from arch/mips/loongson/lemote-2f/Makefile)0
-rw-r--r--arch/mips/loongson64/lemote-2f/clock.c (renamed from arch/mips/loongson/lemote-2f/clock.c)0
-rw-r--r--arch/mips/loongson64/lemote-2f/ec_kb3310b.c (renamed from arch/mips/loongson/lemote-2f/ec_kb3310b.c)0
-rw-r--r--arch/mips/loongson64/lemote-2f/ec_kb3310b.h (renamed from arch/mips/loongson/lemote-2f/ec_kb3310b.h)0
-rw-r--r--arch/mips/loongson64/lemote-2f/irq.c (renamed from arch/mips/loongson/lemote-2f/irq.c)0
-rw-r--r--arch/mips/loongson64/lemote-2f/machtype.c (renamed from arch/mips/loongson/lemote-2f/machtype.c)0
-rw-r--r--arch/mips/loongson64/lemote-2f/pm.c (renamed from arch/mips/loongson/lemote-2f/pm.c)0
-rw-r--r--arch/mips/loongson64/lemote-2f/reset.c (renamed from arch/mips/loongson/lemote-2f/reset.c)0
-rw-r--r--arch/mips/loongson64/loongson-3/Makefile (renamed from arch/mips/loongson/loongson-3/Makefile)0
-rw-r--r--arch/mips/loongson64/loongson-3/cop2-ex.c (renamed from arch/mips/loongson/loongson-3/cop2-ex.c)0
-rw-r--r--arch/mips/loongson64/loongson-3/hpet.c (renamed from arch/mips/loongson/loongson-3/hpet.c)0
-rw-r--r--arch/mips/loongson64/loongson-3/irq.c (renamed from arch/mips/loongson/loongson-3/irq.c)0
-rw-r--r--arch/mips/loongson64/loongson-3/numa.c (renamed from arch/mips/loongson/loongson-3/numa.c)0
-rw-r--r--arch/mips/loongson64/loongson-3/platform.c (renamed from arch/mips/loongson/loongson-3/platform.c)0
-rw-r--r--arch/mips/loongson64/loongson-3/smp.c (renamed from arch/mips/loongson/loongson-3/smp.c)0
-rw-r--r--arch/mips/loongson64/loongson-3/smp.h (renamed from arch/mips/loongson/loongson-3/smp.h)0
-rw-r--r--arch/mips/mm/c-r4k.c2
-rw-r--r--arch/mips/mm/c-tx39.c4
-rw-r--r--arch/mips/mm/dma-default.c30
-rw-r--r--arch/mips/mm/tlb-r3k.c37
-rw-r--r--arch/mips/mm/tlb-r4k.c2
-rw-r--r--arch/mips/mm/tlbex.c33
-rw-r--r--arch/mips/mti-malta/Makefile2
-rw-r--r--arch/mips/mti-malta/malta-dt.c34
-rw-r--r--arch/mips/mti-malta/malta-setup.c4
-rw-r--r--arch/mips/net/Makefile2
-rw-r--r--arch/mips/net/bpf_jit.c262
-rw-r--r--arch/mips/net/bpf_jit.h42
-rw-r--r--arch/mips/net/bpf_jit_asm.S238
-rw-r--r--arch/mips/netlogic/xlr/platform-flash.c3
-rw-r--r--arch/mips/pci/pci-ar2315.c2
-rw-r--r--arch/mips/pci/pci-ar71xx.c14
-rw-r--r--arch/mips/pci/pci-ar724x.c2
-rw-r--r--arch/mips/pci/pci-rt3883.c2
-rw-r--r--arch/mips/ralink/irq.c2
-rw-r--r--arch/mips/sgi-ip27/Makefile6
-rw-r--r--arch/mips/sgi-ip27/ip27-irqno.c48
-rw-r--r--arch/mips/sibyte/Kconfig16
-rw-r--r--arch/mips/txx9/Kconfig2
-rw-r--r--arch/mips/vr41xx/Kconfig10
-rw-r--r--drivers/clk/Makefile3
-rw-r--r--drivers/clk/ingenic/Makefile3
-rw-r--r--drivers/clk/ingenic/cgu.c711
-rw-r--r--drivers/clk/ingenic/cgu.h223
-rw-r--r--drivers/clk/ingenic/jz4740-cgu.c303
-rw-r--r--drivers/clk/ingenic/jz4780-cgu.c733
-rw-r--r--drivers/cpufreq/ls1x-cpufreq.c4
-rw-r--r--drivers/firmware/Kconfig1
-rw-r--r--drivers/firmware/Makefile1
-rw-r--r--drivers/firmware/broadcom/Kconfig11
-rw-r--r--drivers/firmware/broadcom/Makefile1
-rw-r--r--drivers/firmware/broadcom/bcm47xx_nvram.c (renamed from arch/mips/bcm47xx/nvram.c)81
-rw-r--r--drivers/irqchip/Kconfig12
-rw-r--r--drivers/irqchip/Makefile2
-rw-r--r--drivers/irqchip/irq-ingenic.c177
-rw-r--r--drivers/irqchip/irq-mips-cpu.c (renamed from arch/mips/kernel/irq_cpu.c)3
-rw-r--r--drivers/phy/Kconfig7
-rw-r--r--drivers/phy/Makefile1
-rw-r--r--drivers/phy/phy-pistachio-usb.c206
-rw-r--r--drivers/rtc/Kconfig2
-rw-r--r--drivers/rtc/rtc-ls1x.c2
-rw-r--r--drivers/tty/serial/8250/8250_ingenic.c266
-rw-r--r--drivers/tty/serial/8250/Kconfig9
-rw-r--r--drivers/tty/serial/8250/Makefile3
-rw-r--r--drivers/tty/sysrq.c1
-rw-r--r--drivers/usb/host/Kconfig4
-rw-r--r--include/dt-bindings/clock/jz4740-cgu.h37
-rw-r--r--include/dt-bindings/clock/jz4780-cgu.h88
-rw-r--r--include/dt-bindings/phy/phy-pistachio-usb.h16
-rw-r--r--include/linux/bcm47xx_nvram.h17
-rw-r--r--include/linux/irqchip/ingenic.h (renamed from arch/mips/jz4740/irq.h)8
-rw-r--r--include/linux/platform_data/gpio-ath79.h19
-rw-r--r--include/linux/ssb/ssb.h8
281 files changed, 6271 insertions, 2321 deletions
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
new file mode 100644
index 0000000..f8d4134
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
@@ -0,0 +1,53 @@
+Ingenic SoC CGU binding
+
+The CGU in an Ingenic SoC provides all the clocks generated on-chip. It
+typically includes a variety of PLLs, multiplexers, dividers & gates in order
+to provide many different clock signals derived from only 2 external source
+clocks.
+
+Required properties:
+- compatible : Should be "ingenic,<soctype>-cgu".
+ For example "ingenic,jz4740-cgu" or "ingenic,jz4780-cgu".
+- reg : The address & length of the CGU registers.
+- clocks : List of phandle & clock specifiers for clocks external to the CGU.
+ Two such external clocks should be specified - first the external crystal
+ "ext" and second the RTC clock source "rtc".
+- clock-names : List of name strings for the external clocks.
+- #clock-cells: Should be 1.
+ Clock consumers specify this argument to identify a clock. The valid values
+ may be found in <dt-bindings/clock/<soctype>-cgu.h>.
+
+Example SoC include file:
+
+/ {
+ cgu: jz4740-cgu {
+ compatible = "ingenic,jz4740-cgu";
+ reg = <0x10000000 0x100>;
+ #clock-cells = <1>;
+ };
+
+ uart0: serial@10030000 {
+ clocks = <&cgu JZ4740_CLK_UART0>;
+ };
+};
+
+Example board file:
+
+/ {
+ ext: clock@0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ rtc: clock@1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ &cgu {
+ clocks = <&ext> <&rtc>;
+ clock-names: "ext", "rtc";
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
new file mode 100644
index 0000000..e0fc2c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
@@ -0,0 +1,33 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller
+
+The PPL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB.
+
+Required Properties:
+- compatible: has to be "qca,<soctype>-cpu-intc" and one of the following
+ fallbacks:
+ - "qca,ar7100-pll"
+ - "qca,ar7240-pll"
+ - "qca,ar9130-pll"
+ - "qca,ar9330-pll"
+ - "qca,ar9340-pll"
+ - "qca,qca9550-pll"
+- reg: Base address and size of the controllers memory area
+- clock-names: Name of the input clock, has to be "ref"
+- clocks: phandle of the external reference clock
+- #clock-cells: has to be one
+
+Optional properties:
+- clock-output-names: should be "cpu", "ddr", "ahb"
+
+Example:
+
+ memory-controller@18050000 {
+ compatible = "qca,ar9132-ppl", "qca,ar9130-pll";
+ reg = <0x18050000 0x20>;
+
+ clock-names = "ref";
+ clocks = <&extosc>;
+
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "ddr", "ahb";
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ath79.txt b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
new file mode 100644
index 0000000..c522851
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
@@ -0,0 +1,38 @@
+Binding for Qualcomm Atheros AR7xxx/AR9xxx GPIO controller
+
+Required properties:
+- compatible: has to be "qca,<soctype>-gpio" and one of the following
+ fallbacks:
+ - "qca,ar7100-gpio"
+ - "qca,ar9340-gpio"
+- reg: Base address and size of the controllers memory area
+- gpio-controller : Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional parameters.
+- ngpios: Should be set to the number of GPIOs available on the SoC.
+
+Optional properties:
+- interrupt-parent: phandle of the parent interrupt controller.
+- interrupts: Interrupt specifier for the controllers interrupt.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+ source, should be 2
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+
+ gpio@18040000 {
+ compatible = "qca,ar9132-gpio", "qca,ar7100-gpio";
+ reg = <0x18040000 0x30>;
+ interrupts = <2>;
+
+ ngpios = <22>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt
new file mode 100644
index 0000000..5f89fb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt
@@ -0,0 +1,28 @@
+Ingenic SoC Interrupt Controller
+
+Required properties:
+
+- compatible : should be "ingenic,<socname>-intc". Valid strings are:
+ ingenic,jz4740-intc
+ ingenic,jz4770-intc
+ ingenic,jz4775-intc
+ ingenic,jz4780-intc
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+- interrupt-parent : phandle of the CPU interrupt controller.
+- interrupts : Specifies the CPU interrupt the controller is connected to.
+
+Example:
+
+intc: interrupt-controller@10001000 {
+ compatible = "ingenic,jz4740-intc";
+ reg = <0x10001000 0x14>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt
new file mode 100644
index 0000000..aabce78
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt
@@ -0,0 +1,44 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX CPU interrupt controller
+
+On most SoC the IRQ controller need to flush the DDR FIFO before running
+the interrupt handler of some devices. This is configured using the
+qca,ddr-wb-channels and qca,ddr-wb-channel-interrupts properties.
+
+Required Properties:
+
+- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-cpu-intc"
+ as fallback
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+ source, should be 1 for intc
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Optional Properties:
+
+- qca,ddr-wb-channel-interrupts: List of the interrupts needing a write
+ buffer flush
+- qca,ddr-wb-channels: List of phandles to the write buffer channels for
+ each interrupt. If qca,ddr-wb-channel-interrupts is not present the interrupt
+ default to the entry's index.
+
+Example:
+
+ interrupt-controller {
+ compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+ <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+ };
+
+ ...
+
+ ddr_ctrl: memory-controller@18000000 {
+ ...
+ #qca,ddr-wb-channel-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
new file mode 100644
index 0000000..391717a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
@@ -0,0 +1,30 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX MISC interrupt controller
+
+The MISC interrupt controller is a secondary controller for lower priority
+interrupt.
+
+Required Properties:
+- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc"
+ as fallback
+- reg: Base address and size of the controllers memory area
+- interrupt-parent: phandle of the parent interrupt controller.
+- interrupts: Interrupt specifier for the controllers interrupt.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+ source, should be 1
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+
+ interrupt-controller@18060010 {
+ compatible = "qca,ar9132-misc-intc", qca,ar7100-misc-intc";
+ reg = <0x18060010 0x4>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt b/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
new file mode 100644
index 0000000..efe35a06
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt
@@ -0,0 +1,35 @@
+Binding for Qualcomm Atheros AR7xxx/AR9xxx DDR controller
+
+The DDR controller of the ARxxx and AR9xxx families provides an interface
+to flush the FIFO between various devices and the DDR. This is mainly used
+by the IRQ controller to flush the FIFO before running the interrupt handler
+of such devices.
+
+Required properties:
+
+- compatible: has to be "qca,<soc-type>-ddr-controller",
+ "qca,[ar7100|ar7240]-ddr-controller" as fallback.
+ On SoC with PCI support "qca,ar7100-ddr-controller" should be used as
+ fallback, otherwise "qca,ar7240-ddr-controller" should be used.
+- reg: Base address and size of the controllers memory area
+- #qca,ddr-wb-channel-cells: has to be 1, the index of the write buffer
+ channel
+
+Example:
+
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,ar9132-ddr-controller",
+ "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ ...
+
+ interrupt-controller {
+ ...
+ qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+ <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+ };
diff --git a/Documentation/devicetree/bindings/mips/ath79-soc.txt b/Documentation/devicetree/bindings/mips/ath79-soc.txt
new file mode 100644
index 0000000..88a12a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/ath79-soc.txt
@@ -0,0 +1,21 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX SoC
+
+Each device tree must specify a compatible value for the AR SoC
+it uses in the compatible property of the root node. The compatible
+value must be one of the following values:
+
+- qca,ar7130
+- qca,ar7141
+- qca,ar7161
+- qca,ar7240
+- qca,ar7241
+- qca,ar7242
+- qca,ar9130
+- qca,ar9132
+- qca,ar9330
+- qca,ar9331
+- qca,ar9341
+- qca,ar9342
+- qca,ar9344
+- qca,qca9556
+- qca,qca9558
diff --git a/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt b/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt
new file mode 100644
index 0000000..afbc7e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt
@@ -0,0 +1,29 @@
+IMG Pistachio USB PHY
+=====================
+
+Required properties:
+--------------------
+ - compatible: Must be "img,pistachio-usb-phy".
+ - #phy-cells: Must be 0. See ./phy-bindings.txt for details.
+ - clocks: Must contain an entry for each entry in clock-names.
+ See ../clock/clock-bindings.txt for details.
+ - clock-names: Must include "usb_phy".
+ - img,cr-top: Must constain a phandle to the CR_TOP syscon node.
+ - img,refclk: Indicates the reference clock source for the USB PHY.
+ See <dt-bindings/phy/phy-pistachio-usb.h> for a list of valid values.
+
+Optional properties:
+--------------------
+ - phy-supply: USB VBUS supply. Must supply 5.0V.
+
+Example:
+--------
+usb_phy: usb-phy {
+ compatible = "img,pistachio-usb-phy";
+ clocks = <&clk_core CLK_USB_PHY>;
+ clock-names = "usb_phy";
+ phy-supply = <&usb_vbus>;
+ img,refclk = <REFCLK_CLK_CORE>;
+ img,cr-top = <&cr_top>;
+ #phy-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.txt b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
new file mode 100644
index 0000000..c2d3b3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
@@ -0,0 +1,22 @@
+* Ingenic SoC UART
+
+Required properties:
+- compatible : "ingenic,jz4740-uart" or "ingenic,jz4780-uart"
+- reg : offset and length of the register set for the device.
+- interrupts : should contain uart interrupt.
+- clocks : phandles to the module & baud clocks.
+- clock-names: tuple listing input clock names.
+ Required elements: "baud", "module"
+
+Example:
+
+uart0: serial@10030000 {
+ compatible = "ingenic,jz4740-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <9>;
+
+ clocks = <&ext>, <&cgu JZ4740_CLK_UART0>;
+ clock-names = "baud", "module";
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 8e8f4bc..7b607761 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -106,6 +106,7 @@ ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
iom Iomega Corporation
img Imagination Technologies Ltd.
+ingenic Ingenic Semiconductor
innolux Innolux Corporation
intel Intel Corporation
intercontrol Inter Control Group
@@ -161,6 +162,7 @@ powervr PowerVR (deprecated, use img)
qca Qualcomm Atheros, Inc.
qcom Qualcomm Technologies, Inc
qemu QEMU, a generic and open source machine emulator and virtualizer
+qi Qi Hardware
qnap QNAP Systems, Inc.
radxa Radxa
raidsonic RaidSonic Technology GmbH
@@ -206,6 +208,7 @@ tlm Trusted Logic Mobility
toradex Toradex AG
toshiba Toshiba Corporation
toumaz Toumaz
+tplink TP-LINK Technologies Co., Ltd.
truly Truly Semiconductors Limited
usi Universal Scientific Industrial Co., Ltd.
v3 V3 Semiconductor
diff --git a/MAINTAINERS b/MAINTAINERS
index c54a674..6aedd50 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2229,6 +2229,14 @@ F: arch/mips/bcm3384/*
F: arch/mips/include/asm/mach-bcm3384/*
F: arch/mips/kernel/*bmips*
+BROADCOM BCM47XX MIPS ARCHITECTURE
+M: Hauke Mehrtens <hauke@hauke-m.de>
+M: Rafał Miłecki <zajec5@gmail.com>
+L: linux-mips@linux-mips.org
+S: Maintained
+F: arch/mips/bcm47xx/*
+F: arch/mips/include/asm/mach-bcm47xx/*
+
BROADCOM BCM5301X ARM ARCHITECTURE
M: Hauke Mehrtens <hauke@hauke-m.de>
L: linux-arm-kernel@lists.infradead.org
@@ -2333,6 +2341,12 @@ S: Supported
F: drivers/gpio/gpio-bcm-kona.c
F: Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt
+BROADCOM NVRAM DRIVER
+M: Rafał Miłecki <zajec5@gmail.com>
+L: linux-mips@linux-mips.org
+S: Maintained
+F: drivers/firmware/broadcom/*
+
BROADCOM STB NAND FLASH DRIVER
M: Brian Norris <computersforpeace@gmail.com>
L: linux-mtd@lists.infradead.org
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 39cf40d..a424e46 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -15,8 +15,8 @@ platforms += jazz
platforms += jz4740
platforms += lantiq
platforms += lasat
-platforms += loongson
-platforms += loongson1
+platforms += loongson32
+platforms += loongson64
platforms += mti-malta
platforms += mti-sead3
platforms += netlogic
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b65edf5..2a14585 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -21,11 +21,12 @@ config MIPS
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_KPROBES
select HAVE_KRETPROBES
+ select HAVE_SYSCALL_TRACEPOINTS
select HAVE_DEBUG_KMEMLEAK
select HAVE_SYSCALL_TRACEPOINTS
select ARCH_HAS_ELF_RANDOMIZE
select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
- select RTC_LIB if !MACH_LOONGSON
+ select RTC_LIB if !MACH_LOONGSON64
select GENERIC_ATOMIC64 if !64BIT
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select HAVE_DMA_ATTRS
@@ -70,7 +71,7 @@ config MIPS_ALCHEMY
select ARCH_PHYS_ADDR_T_64BIT
select CEVT_R4K
select CSRC_R4K
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select DMA_MAYBE_COHERENT # Au1000,1500,1100 aren't, rest is
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
@@ -85,7 +86,7 @@ config AR7
select DMA_NONCOHERENT
select CEVT_R4K
select CSRC_R4K
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select NO_EXCEPT_FILL
select SWAP_IO_SPACE
select SYS_HAS_CPU_MIPS32_R1
@@ -106,7 +107,7 @@ config ATH25
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select IRQ_DOMAIN
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_BIG_ENDIAN
@@ -123,14 +124,17 @@ config ATH79
select CSRC_R4K
select DMA_NONCOHERENT
select HAVE_CLK
+ select COMMON_CLK
select CLKDEV_LOOKUP
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select MIPS_MACHINE
select SYS_HAS_CPU_MIPS32_R2
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_MIPS16
+ select SYS_SUPPORTS_ZBOOT
+ select USE_OF
help
Support for the Atheros AR71XX/AR724X/AR913X SoCs.
@@ -146,7 +150,7 @@ config BMIPS_GENERIC
select BCM7038_L1_IRQ
select BCM7120_L2_IRQ
select BRCMSTB_L2_IRQ
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select RAW_IRQ_ACCESSORS
select DMA_NONCOHERENT
select SYS_SUPPORTS_32BIT_KERNEL
@@ -176,7 +180,7 @@ config BCM47XX
select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SYS_HAS_CPU_MIPS32_R1
select NO_EXCEPT_FILL
select SYS_SUPPORTS_32BIT_KERNEL
@@ -186,6 +190,7 @@ config BCM47XX
select USE_GENERIC_EARLY_PRINTK_8250
select GPIOLIB
select LEDS_GPIO_REGISTER
+ select BCM47XX_NVRAM
help
Support for BCM47XX based boards
@@ -196,7 +201,7 @@ config BCM63XX
select CSRC_R4K
select SYNC_R4K
select DMA_NONCOHERENT
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_HAS_EARLY_PRINTK
@@ -216,7 +221,7 @@ config MIPS_COBALT
select HW_HAS_PCI
select I8253
select I8259
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select IRQ_GT641XX
select PCI_GT64XXX_PCI0
select PCI
@@ -239,7 +244,7 @@ config MACH_DECSTATION
select CPU_R4400_WORKAROUNDS if 64BIT
select DMA_NONCOHERENT
select NO_IOPORT_MAP
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SYS_HAS_CPU_R3000
select SYS_HAS_CPU_R4X00
select SYS_SUPPORTS_32BIT_KERNEL
@@ -274,7 +279,7 @@ config MACH_JAZZ
select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
select GENERIC_ISA_DMA
select HAVE_PCSPKR_PLATFORM
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select I8253
select I8259
select ISA
@@ -288,23 +293,24 @@ config MACH_JAZZ
Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
Olivetti M700-10 workstations.
-config MACH_JZ4740
- bool "Ingenic JZ4740 based machines"
- select SYS_HAS_CPU_MIPS32_R1
+config MACH_INGENIC
+ bool "Ingenic SoC based machines"
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_ZBOOT_UART16550
select DMA_NONCOHERENT
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select ARCH_REQUIRE_GPIOLIB
- select SYS_HAS_EARLY_PRINTK
- select HAVE_CLK
+ select COMMON_CLK
select GENERIC_IRQ_CHIP
+ select BUILTIN_DTB
+ select USE_OF
+ select LIBFDT
config LANTIQ
bool "Lantiq based platforms"
select DMA_NONCOHERENT
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select CEVT_R4K
select CSRC_R4K
select SYS_HAS_CPU_MIPS32_R1
@@ -333,7 +339,7 @@ config LASAT
select DMA_NONCOHERENT
select SYS_HAS_EARLY_PRINTK
select HW_HAS_PCI
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select PCI_GT64XXX_PCI0
select MIPS_NILE4
select R5000_CPU_SCACHE
@@ -342,26 +348,28 @@ config LASAT
select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
select SYS_SUPPORTS_LITTLE_ENDIAN
-config MACH_LOONGSON
- bool "Loongson family of machines"
+config MACH_LOONGSON32
+ bool "Loongson-1 family of machines"
select SYS_SUPPORTS_ZBOOT
help
- This enables the support of Loongson family of machines.
+ This enables support for the Loongson-1 family of machines.
- Loongson is a family of general-purpose MIPS-compatible CPUs.
- developed at Institute of Computing Technology (ICT),
- Chinese Academy of Sciences (CAS) in the People's Republic
- of China. The chief architect is Professor Weiwu Hu.
+ Loongson-1 is a family of 32-bit MIPS-compatible SoCs developed by
+ the Institute of Computing Technology (ICT), Chinese Academy of
+ Sciences (CAS).
-config MACH_LOONGSON1
- bool "Loongson 1 family of machines"
+config MACH_LOONGSON64
+ bool "Loongson-2/3 family of machines"
select SYS_SUPPORTS_ZBOOT
help
- This enables support for the Loongson 1 based machines.
+ This enables the support of Loongson-2/3 family of machines.
- Loongson 1 is a family of 32-bit MIPS-compatible SoCs developed by
- the ICT (Institute of Computing Technology) and the Chinese Academy
- of Sciences.
+ Loongson-2 is a family of single-core CPUs and Loongson-3 is a
+ family of multi-core CPUs. They are both 64-bit general-purpose
+ MIPS-compatible CPUs. Loongson-2/3 are developed by the Institute
+ of Computing Technology (ICT), Chinese Academy of Sciences (CAS)
+ in the People's Republic of China. The chief architect is Professor
+ Weiwu Hu.
config MACH_PISTACHIO
bool "IMG Pistachio SoC based boards"
@@ -373,7 +381,7 @@ config MACH_PISTACHIO
select COMMON_CLK
select CSRC_R4K
select DMA_MAYBE_COHERENT
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select LIBFDT
select MFD_SYSCON
select MIPS_CPU_SCACHE
@@ -386,6 +394,8 @@ config MACH_PISTACHIO
select SYS_SUPPORTS_MIPS_CPS
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_ZBOOT
+ select SYS_HAS_EARLY_PRINTK
+ select USE_GENERIC_EARLY_PRINTK_8250
select USE_OF
help
This enables support for the IMG Pistachio SoC platform.
@@ -395,13 +405,14 @@ config MIPS_MALTA
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select BOOT_RAW
+ select BUILTIN_DTB
select CEVT_R4K
select CSRC_R4K
select CLKSRC_MIPS_GIC
select DMA_MAYBE_COHERENT
select GENERIC_ISA_DMA
select HAVE_PCSPKR_PLATFORM
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select MIPS_GIC
select HW_HAS_PCI
select I8253
@@ -434,6 +445,8 @@ config MIPS_MALTA
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_SMARTMIPS
select SYS_SUPPORTS_ZBOOT
+ select USE_OF
+ select ZONE_DMA32 if 64BIT
help
This enables support for the MIPS Technologies Malta evaluation
board.
@@ -449,7 +462,7 @@ config MIPS_SEAD3
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
select DMA_NONCOHERENT
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select MIPS_GIC
select LIBFDT
select MIPS_MSC
@@ -512,7 +525,7 @@ config PMC_MSP
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_MIPS16
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SERIAL_8250
select SERIAL_8250_CONSOLE
select USB_EHCI_BIG_ENDIAN_MMIO
@@ -529,7 +542,7 @@ config RALINK
select CSRC_R4K
select BOOT_RAW
select DMA_NONCOHERENT
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select USE_OF
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
@@ -555,7 +568,7 @@ config SGI_IP22
select I8253
select I8259
select IP22_CPU_SCACHE
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select SGI_HAS_I8042
select SGI_HAS_INDYDOG
@@ -614,7 +627,7 @@ config SGI_IP28
select DEFAULT_SGI_PARTITION
select DMA_NONCOHERENT
select GENERIC_ISA_DMA_SUPPORT_BROKEN
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select HW_HAS_EISA
select I8253
select I8259
@@ -650,7 +663,7 @@ config SGI_IP32
select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select R5000_CPU_SCACHE
select RM7000_CPU_SCACHE
select SYS_HAS_CPU_R5000
@@ -766,7 +779,7 @@ config SNI_RM
select HAVE_PCSPKR_PLATFORM
select HW_HAS_EISA
select HW_HAS_PCI
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select I8253
select I8259
select ISA
@@ -799,7 +812,7 @@ config MIKROTIK_RB532
select CSRC_R4K
select DMA_NONCOHERENT
select HW_HAS_PCI
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -866,7 +879,7 @@ config NLM_XLR_BOARD
select NR_CPUS_DEFAULT_32
select CEVT_R4K
select CSRC_R4K
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select ZONE_DMA32 if 64BIT
select SYNC_R4K
select SYS_HAS_EARLY_PRINTK
@@ -893,7 +906,7 @@ config NLM_XLP_BOARD
select NR_CPUS_DEFAULT_32
select CEVT_R4K
select CSRC_R4K
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select ZONE_DMA32 if 64BIT
select SYNC_R4K
select SYS_HAS_EARLY_PRINTK
@@ -942,8 +955,8 @@ source "arch/mips/sibyte/Kconfig"
source "arch/mips/txx9/Kconfig"
source "arch/mips/vr41xx/Kconfig"
source "arch/mips/cavium-octeon/Kconfig"
-source "arch/mips/loongson/Kconfig"
-source "arch/mips/loongson1/Kconfig"
+source "arch/mips/loongson32/Kconfig"
+source "arch/mips/loongson64/Kconfig"
source "arch/mips/netlogic/Kconfig"
source "arch/mips/paravirt/Kconfig"
@@ -1142,10 +1155,6 @@ config SYS_SUPPORTS_HUGETLBFS
config MIPS_HUGE_TLB_SUPPORT
def_bool HUGETLB_PAGE || TRANSPARENT_HUGEPAGE
-config IRQ_CPU
- bool
- select IRQ_DOMAIN
-
config IRQ_CPU_RM7K
bool
@@ -1172,7 +1181,7 @@ config SOC_EMMA2RH
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SWAP_IO_SPACE
select SYS_HAS_CPU_R5500
select SYS_SUPPORTS_32BIT_KERNEL
@@ -1183,7 +1192,7 @@ config SOC_PNX833X
bool
select CEVT_R4K
select CSRC_R4K
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select DMA_NONCOHERENT
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_32BIT_KERNEL
@@ -1569,7 +1578,8 @@ config CPU_CAVIUM_OCTEON
select WEAK_ORDERING
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
- select USB_EHCI_BIG_ENDIAN_MMIO
+ select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
+ select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
select MIPS_L1_CACHE_SHIFT_7
help
The Cavium Octeon processor is a highly integrated chip containing
@@ -1587,7 +1597,7 @@ config CPU_BMIPS
select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000
select CPU_SUPPORTS_32BIT_KERNEL
select DMA_NONCOHERENT
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SWAP_IO_SPACE
select WEAK_ORDERING
select CPU_SUPPORTS_HIGHMEM
@@ -2672,6 +2682,51 @@ config USE_OF
config BUILTIN_DTB
bool
+choice
+ prompt "Kernel appended dtb support" if OF
+ default MIPS_NO_APPENDED_DTB
+
+ config MIPS_NO_APPENDED_DTB
+ bool "None"
+ help
+ Do not enable appended dtb support.
+
+ config MIPS_RAW_APPENDED_DTB
+ bool "vmlinux.bin"
+ help
+ With this option, the boot code will look for a device tree binary
+ DTB) appended to raw vmlinux.bin (without decompressor).
+ (e.g. cat vmlinux.bin <filename>.dtb > vmlinux_w_dtb).
+
+ This is meant as a backward compatibility convenience for those
+ systems with a bootloader that can't be upgraded to accommodate
+ the documented boot protocol using a device tree.
+
+ Beware that there is very little in terms of protection against
+ this option being confused by leftover garbage in memory that might
+ look like a DTB header after a reboot if no actual DTB is appended
+ to vmlinux.bin. Do not leave this option active in a production kernel
+ if you don't intend to always append a DTB.
+
+ config MIPS_ZBOOT_APPENDED_DTB
+ bool "vmlinuz.bin"
+ depends on SYS_SUPPORTS_ZBOOT
+ help
+ With this option, the boot code will look for a device tree binary
+ DTB) appended to raw vmlinuz.bin (with decompressor).
+ (e.g. cat vmlinuz.bin <filename>.dtb > vmlinuz_w_dtb).
+
+ This is meant as a backward compatibility convenience for those
+ systems with a bootloader that can't be upgraded to accommodate
+ the documented boot protocol using a device tree.
+
+ Beware that there is very little in terms of protection against
+ this option being confused by leftover garbage in memory that might
+ look like a DTB header after a reboot if no actual DTB is appended
+ to vmlinuz.bin. Do not leave this option active in a production kernel
+ if you don't intend to always append a DTB.
+endchoice
+
endmenu
config LOCKDEP_SUPPORT
diff --git a/arch/mips/alchemy/common/clock.c b/arch/mips/alchemy/common/clock.c
index 6a98d2c..6e46abe 100644
--- a/arch/mips/alchemy/common/clock.c
+++ b/arch/mips/alchemy/common/clock.c
@@ -752,12 +752,12 @@ static int __init alchemy_clk_init_fgens(int ctype)
switch (ctype) {
case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200:
id.ops = &alchemy_clkops_fgenv1;
- id.parent_names = (const char **)alchemy_clk_fgv1_parents;
+ id.parent_names = alchemy_clk_fgv1_parents;
id.num_parents = 2;
break;
case ALCHEMY_CPU_AU1300:
id.ops = &alchemy_clkops_fgenv2;
- id.parent_names = (const char **)alchemy_clk_fgv2_parents;
+ id.parent_names = alchemy_clk_fgv2_parents;
id.num_parents = 3;
break;
default:
@@ -961,7 +961,7 @@ static int __init alchemy_clk_setup_imux(int ctype)
struct clk *c;
id.ops = &alchemy_clkops_csrc;
- id.parent_names = (const char **)alchemy_clk_csrc_parents;
+ id.parent_names = alchemy_clk_csrc_parents;
id.num_parents = 7;
id.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE;
diff --git a/arch/mips/ath25/ar2315.c b/arch/mips/ath25/ar2315.c
index 2befa7d..8742e1c 100644
--- a/arch/mips/ath25/ar2315.c
+++ b/arch/mips/ath25/ar2315.c
@@ -76,7 +76,7 @@ static void ar2315_misc_irq_handler(unsigned irq, struct irq_desc *desc)
unsigned nr, misc_irq = 0;
if (pending) {
- struct irq_domain *domain = irq_get_handler_data(irq);
+ struct irq_domain *domain = irq_desc_get_handler_data(desc);
nr = __ffs(pending);
misc_irq = irq_find_mapping(domain, nr);
diff --git a/arch/mips/ath25/ar5312.c b/arch/mips/ath25/ar5312.c
index b6887f7..094b938 100644
--- a/arch/mips/ath25/ar5312.c
+++ b/arch/mips/ath25/ar5312.c
@@ -80,7 +80,7 @@ static void ar5312_misc_irq_handler(unsigned irq, struct irq_desc *desc)
unsigned nr, misc_irq = 0;
if (pending) {
- struct irq_domain *domain = irq_get_handler_data(irq);
+ struct irq_domain *domain = irq_desc_get_handler_data(desc);
nr = __ffs(pending);
misc_irq = irq_find_mapping(domain, nr);
diff --git a/arch/mips/ath25/board.c b/arch/mips/ath25/board.c
index b8bb782..9ab48ff 100644
--- a/arch/mips/ath25/board.c
+++ b/arch/mips/ath25/board.c
@@ -216,7 +216,7 @@ void __init plat_time_init(void)
ar2315_plat_time_init();
}
-unsigned int __cpuinit get_c0_compare_int(void)
+unsigned int get_c0_compare_int(void)
{
return CP0_LEGACY_COMPARE_IRQ;
}
diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index dfc6020..13c04cf 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -71,6 +71,18 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
+choice
+ prompt "Build a DTB in the kernel"
+ optional
+ help
+ Select a devicetree that should be built into the kernel.
+
+ config DTB_TL_WR1043ND_V1
+ bool "TL-WR1043ND Version 1"
+ select BUILTIN_DTB
+ select SOC_AR913X
+endchoice
+
endmenu
config SOC_AR71XX
diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c
index 26479f4..eb5117c 100644
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
#include <asm/div64.h>
@@ -28,24 +29,27 @@
#define AR724X_BASE_FREQ 5000000
#define AR913X_BASE_FREQ 5000000
-struct clk {
- unsigned long rate;
+static struct clk *clks[3];
+static struct clk_onecell_data clk_data = {
+ .clks = clks,
+ .clk_num = ARRAY_SIZE(clks),
};
-static void __init ath79_add_sys_clkdev(const char *id, unsigned long rate)
+static struct clk *__init ath79_add_sys_clkdev(
+ const char *id, unsigned long rate)
{
struct clk *clk;
int err;
- clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+ clk = clk_register_fixed_rate(NULL, id, NULL, CLK_IS_ROOT, rate);
if (!clk)
panic("failed to allocate %s clock structure", id);
- clk->rate = rate;
-
err = clk_register_clkdev(clk, id, NULL);
if (err)
panic("unable to register %s clock device", id);
+
+ return clk;
}
static void __init ar71xx_clocks_init(void)
@@ -62,7 +66,7 @@ static void __init ar71xx_clocks_init(void)
pll = ath79_pll_rr(AR71XX_PLL_REG_CPU_CONFIG);
- div = ((pll >> AR71XX_PLL_DIV_SHIFT) & AR71XX_PLL_DIV_MASK) + 1;
+ div = ((pll >> AR71XX_PLL_FB_SHIFT) & AR71XX_PLL_FB_MASK) + 1;
freq = div * ref_rate;
div = ((pll >> AR71XX_CPU_DIV_SHIFT) & AR71XX_CPU_DIV_MASK) + 1;
@@ -75,9 +79,9 @@ static void __init ar71xx_clocks_init(void)
ahb_rate = cpu_rate / div;
ath79_add_sys_clkdev("ref", ref_rate);
- ath79_add_sys_clkdev("cpu", cpu_rate);
- ath79_add_sys_clkdev("ddr", ddr_rate);
- ath79_add_sys_clkdev("ahb", ahb_rate);
+ clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
+ clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
+ clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
clk_add_alias("wdt", NULL, "ahb", NULL);
clk_add_alias("uart", NULL, "ahb", NULL);
@@ -96,7 +100,7 @@ static void __init ar724x_clocks_init(void)
ref_rate = AR724X_BASE_FREQ;
pll = ath79_pll_rr(AR724X_PLL_REG_CPU_CONFIG);
- div = ((pll >> AR724X_PLL_DIV_SHIFT) & AR724X_PLL_DIV_MASK);
+ div = ((pll >> AR724X_PLL_FB_SHIFT) & AR724X_PLL_FB_MASK);
freq = div * ref_rate;
div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK);
@@ -111,9 +115,9 @@ static void __init ar724x_clocks_init(void)
ahb_rate = cpu_rate / div;
ath79_add_sys_clkdev("ref", ref_rate);
- ath79_add_sys_clkdev("cpu", cpu_rate);
- ath79_add_sys_clkdev("ddr", ddr_rate);
- ath79_add_sys_clkdev("ahb", ahb_rate);
+ clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
+ clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
+ clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
clk_add_alias("wdt", NULL, "ahb", NULL);
clk_add_alias("uart", NULL, "ahb", NULL);
@@ -132,7 +136,7 @@ static void __init ar913x_clocks_init(void)
ref_rate = AR913X_BASE_FREQ;
pll = ath79_pll_rr(AR913X_PLL_REG_CPU_CONFIG);
- div = ((pll >> AR913X_PLL_DIV_SHIFT) & AR913X_PLL_DIV_MASK);
+ div = ((pll >> AR913X_PLL_FB_SHIFT) & AR913X_PLL_FB_MASK);
freq = div * ref_rate;
cpu_rate = freq;
@@ -144,9 +148,9 @@ static void __init ar913x_clocks_init(void)
ahb_rate = cpu_rate / div;
ath79_add_sys_clkdev("ref", ref_rate);
- ath79_add_sys_clkdev("cpu", cpu_rate);
- ath79_add_sys_clkdev("ddr", ddr_rate);
- ath79_add_sys_clkdev("ahb", ahb_rate);
+ clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
+ clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
+ clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
clk_add_alias("wdt", NULL, "ahb", NULL);
clk_add_alias("uart", NULL, "ahb", NULL);
@@ -206,9 +210,9 @@ static void __init ar933x_clocks_init(void)
}
ath79_add_sys_clkdev("ref", ref_rate);
- ath79_add_sys_clkdev("cpu", cpu_rate);
- ath79_add_sys_clkdev("ddr", ddr_rate);
- ath79_add_sys_clkdev("ahb", ahb_rate);
+ clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
+ clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
+ clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
clk_add_alias("wdt", NULL, "ahb", NULL);
clk_add_alias("uart", NULL, "ref", NULL);
@@ -340,9 +344,9 @@ static void __init ar934x_clocks_init(void)
ahb_rate = cpu_pll / (postdiv + 1);
ath79_add_sys_clkdev("ref", ref_rate);
- ath79_add_sys_clkdev("cpu", cpu_rate);
- ath79_add_sys_clkdev("ddr", ddr_rate);
- ath79_add_sys_clkdev("ahb", ahb_rate);
+ clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
+ clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
+ clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
clk_add_alias("wdt", NULL, "ref", NULL);
clk_add_alias("uart", NULL, "ref", NULL);
@@ -427,9 +431,9 @@ static void __init qca955x_clocks_init(void)
ahb_rate = cpu_pll / (postdiv + 1);
ath79_add_sys_clkdev("ref", ref_rate);
- ath79_add_sys_clkdev("cpu", cpu_rate);
- ath79_add_sys_clkdev("ddr", ddr_rate);
- ath79_add_sys_clkdev("ahb", ahb_rate);
+ clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
+ clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
+ clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
clk_add_alias("wdt", NULL, "ref", NULL);
clk_add_alias("uart", NULL, "ref", NULL);
@@ -451,6 +455,8 @@ void __init ath79_clocks_init(void)
qca955x_clocks_init();
else
BUG();
+
+ of_clk_init(NULL);
}
unsigned long __init
@@ -469,22 +475,16 @@ ath79_get_sys_clk_rate(const char *id)
return rate;
}
-/*
- * Linux clock API
- */
-int clk_enable(struct clk *clk)
+#ifdef CONFIG_OF
+static void __init ath79_clocks_init_dt(struct device_node *np)
{
- return 0;
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
}
-EXPORT_SYMBOL(clk_enable);
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
+CLK_OF_DECLARE(ar7100, "qca,ar7100-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar7240, "qca,ar7240-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar9130, "qca,ar9130-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar9330, "qca,ar9330-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar9340, "qca,ar9340-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar9550, "qca,qca9550-pll", ath79_clocks_init_dt);
+#endif
diff --git a/arch/mips/ath79/common.c b/arch/mips/ath79/common.c
index eb3966c..3cedd1f 100644
--- a/arch/mips/ath79/common.c
+++ b/arch/mips/ath79/common.c
@@ -38,11 +38,27 @@ unsigned int ath79_soc_rev;
void __iomem *ath79_pll_base;
void __iomem *ath79_reset_base;
EXPORT_SYMBOL_GPL(ath79_reset_base);
-void __iomem *ath79_ddr_base;
+static void __iomem *ath79_ddr_base;
+static void __iomem *ath79_ddr_wb_flush_base;
+static void __iomem *ath79_ddr_pci_win_base;
+
+void ath79_ddr_ctrl_init(void)
+{
+ ath79_ddr_base = ioremap_nocache(AR71XX_DDR_CTRL_BASE,
+ AR71XX_DDR_CTRL_SIZE);
+ if (soc_is_ar71xx() || soc_is_ar934x()) {
+ ath79_ddr_wb_flush_base = ath79_ddr_base + 0x9c;
+ ath79_ddr_pci_win_base = ath79_ddr_base + 0x7c;
+ } else {
+ ath79_ddr_wb_flush_base = ath79_ddr_base + 0x7c;
+ ath79_ddr_pci_win_base = 0;
+ }
+}
+EXPORT_SYMBOL_GPL(ath79_ddr_ctrl_init);
void ath79_ddr_wb_flush(u32 reg)
{
- void __iomem *flush_reg = ath79_ddr_base + reg;
+ void __iomem *flush_reg = ath79_ddr_wb_flush_base + reg;
/* Flush the DDR write buffer. */
__raw_writel(0x1, flush_reg);
@@ -56,6 +72,21 @@ void ath79_ddr_wb_flush(u32 reg)
}
EXPORT_SYMBOL_GPL(ath79_ddr_wb_flush);
+void ath79_ddr_set_pci_windows(void)
+{
+ BUG_ON(!ath79_ddr_pci_win_base);
+
+ __raw_writel(AR71XX_PCI_WIN0_OFFS, ath79_ddr_pci_win_base + 0);
+ __raw_writel(AR71XX_PCI_WIN1_OFFS, ath79_ddr_pci_win_base + 1);
+ __raw_writel(AR71XX_PCI_WIN2_OFFS, ath79_ddr_pci_win_base + 2);
+ __raw_writel(AR71XX_PCI_WIN3_OFFS, ath79_ddr_pci_win_base + 3);
+ __raw_writel(AR71XX_PCI_WIN4_OFFS, ath79_ddr_pci_win_base + 4);
+ __raw_writel(AR71XX_PCI_WIN5_OFFS, ath79_ddr_pci_win_base + 5);
+ __raw_writel(AR71XX_PCI_WIN6_OFFS, ath79_ddr_pci_win_base + 6);
+ __raw_writel(AR71XX_PCI_WIN7_OFFS, ath79_ddr_pci_win_base + 7);
+}
+EXPORT_SYMBOL_GPL(ath79_ddr_set_pci_windows);
+
void ath79_device_reset_set(u32 mask)
{
unsigned long flags;
diff --git a/arch/mips/ath79/common.h b/arch/mips/ath79/common.h
index c39de61..e5ea712 100644
--- a/arch/mips/ath79/common.h
+++ b/arch/mips/ath79/common.h
@@ -22,6 +22,7 @@
void ath79_clocks_init(void);
unsigned long ath79_get_sys_clk_rate(const char *id);
+void ath79_ddr_ctrl_init(void);
void ath79_ddr_wb_flush(unsigned int reg);
void ath79_gpio_function_enable(u32 mask);
diff --git a/arch/mips/ath79/dev-common.c b/arch/mips/ath79/dev-common.c
index 516225d..9d0172a 100644
--- a/arch/mips/ath79/dev-common.c
+++ b/arch/mips/ath79/dev-common.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/gpio-ath79.h>
#include <linux/serial_8250.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -106,3 +107,53 @@ void __init ath79_register_wdt(void)
platform_device_register_simple("ath79-wdt", -1, &res, 1);
}
+
+static struct ath79_gpio_platform_data ath79_gpio_pdata;
+
+static struct resource ath79_gpio_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = AR71XX_GPIO_BASE,
+ .end = AR71XX_GPIO_BASE + AR71XX_GPIO_SIZE - 1,
+ },
+ {
+ .start = ATH79_MISC_IRQ(2),
+ .end = ATH79_MISC_IRQ(2),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ath79_gpio_device = {
+ .name = "ath79-gpio",
+ .id = -1,
+ .resource = ath79_gpio_resources,
+ .num_resources = ARRAY_SIZE(ath79_gpio_resources),
+ .dev = {
+ .platform_data = &ath79_gpio_pdata
+ },
+};
+
+void __init ath79_gpio_init(void)
+{
+ if (soc_is_ar71xx()) {
+ ath79_gpio_pdata.ngpios = AR71XX_GPIO_COUNT;
+ } else if (soc_is_ar7240()) {
+ ath79_gpio_pdata.ngpios = AR7240_GPIO_COUNT;
+ } else if (soc_is_ar7241() || soc_is_ar7242()) {
+ ath79_gpio_pdata.ngpios = AR7241_GPIO_COUNT;
+ } else if (soc_is_ar913x()) {
+ ath79_gpio_pdata.ngpios = AR913X_GPIO_COUNT;
+ } else if (soc_is_ar933x()) {
+ ath79_gpio_pdata.ngpios = AR933X_GPIO_COUNT;
+ } else if (soc_is_ar934x()) {
+ ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT;
+ ath79_gpio_pdata.oe_inverted = 1;
+ } else if (soc_is_qca955x()) {
+ ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT;
+ ath79_gpio_pdata.oe_inverted = 1;
+ } else {
+ BUG();
+ }
+
+ platform_device_register(&ath79_gpio_device);
+}
diff --git a/arch/mips/ath79/gpio.c b/arch/mips/ath79/gpio.c
index 8d025b0..f59ccb2 100644
--- a/arch/mips/ath79/gpio.c
+++ b/arch/mips/ath79/gpio.c
@@ -20,13 +20,15 @@
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/gpio.h>
+#include <linux/platform_data/gpio-ath79.h>
+#include <linux/of_device.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79.h>
#include "common.h"
static void __iomem *ath79_gpio_base;
-static unsigned long ath79_gpio_count;
+static u32 ath79_gpio_count;
static DEFINE_SPINLOCK(ath79_gpio_lock);
static void __ath79_gpio_set_value(unsigned gpio, int value)
@@ -178,39 +180,72 @@ void ath79_gpio_function_disable(u32 mask)
ath79_gpio_function_setup(0, mask);
}
-void __init ath79_gpio_init(void)
+static const struct of_device_id ath79_gpio_of_match[] = {
+ { .compatible = "qca,ar7100-gpio" },
+ { .compatible = "qca,ar9340-gpio" },
+ {},
+};
+
+static int ath79_gpio_probe(struct platform_device *pdev)
{
+ struct ath79_gpio_platform_data *pdata = pdev->dev.platform_data;
+ struct device_node *np = pdev->dev.of_node;
+ struct resource *res;
+ bool oe_inverted;
int err;
- if (soc_is_ar71xx())
- ath79_gpio_count = AR71XX_GPIO_COUNT;
- else if (soc_is_ar7240())
- ath79_gpio_count = AR7240_GPIO_COUNT;
- else if (soc_is_ar7241() || soc_is_ar7242())
- ath79_gpio_count = AR7241_GPIO_COUNT;
- else if (soc_is_ar913x())
- ath79_gpio_count = AR913X_GPIO_COUNT;
- else if (soc_is_ar933x())
- ath79_gpio_count = AR933X_GPIO_COUNT;
- else if (soc_is_ar934x())
- ath79_gpio_count = AR934X_GPIO_COUNT;
- else if (soc_is_qca955x())
- ath79_gpio_count = QCA955X_GPIO_COUNT;
- else
- BUG();
+ if (np) {
+ err = of_property_read_u32(np, "ngpios", &ath79_gpio_count);
+ if (err) {
+ dev_err(&pdev->dev, "ngpios property is not valid\n");
+ return err;
+ }
+ if (ath79_gpio_count >= 32) {
+ dev_err(&pdev->dev, "ngpios must be less than 32\n");
+ return -EINVAL;
+ }
+ oe_inverted = of_device_is_compatible(np, "qca,ar9340-gpio");
+ } else if (pdata) {
+ ath79_gpio_count = pdata->ngpios;
+ oe_inverted = pdata->oe_inverted;
+ } else {
+ dev_err(&pdev->dev, "No DT node or platform data found\n");
+ return -EINVAL;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ath79_gpio_base = devm_ioremap_nocache(
+ &pdev->dev, res->start, resource_size(res));
+ if (!ath79_gpio_base)
+ return -ENOMEM;
- ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+ ath79_gpio_chip.dev = &pdev->dev;
ath79_gpio_chip.ngpio = ath79_gpio_count;
- if (soc_is_ar934x() || soc_is_qca955x()) {
+ if (oe_inverted) {
ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
}
err = gpiochip_add(&ath79_gpio_chip);
- if (err)
- panic("cannot add AR71xx GPIO chip, error=%d", err);
+ if (err) {
+ dev_err(&pdev->dev,
+ "cannot add AR71xx GPIO chip, error=%d", err);
+ return err;
+ }
+
+ return 0;
}
+static struct platform_driver ath79_gpio_driver = {
+ .driver = {
+ .name = "ath79-gpio",
+ .of_match_table = ath79_gpio_of_match,
+ },
+ .probe = ath79_gpio_probe,
+};
+
+module_platform_driver(ath79_gpio_driver);
+
int gpio_get_value(unsigned gpio)
{
if (gpio < ath79_gpio_count)
diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c
index 6adae36..afb0096 100644
--- a/arch/mips/ath79/irq.c
+++ b/arch/mips/ath79/irq.c
@@ -15,7 +15,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/of_irq.h>
+#include "../../../drivers/irqchip/irqchip.h"
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
@@ -23,9 +25,7 @@
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
-
-static void (*ath79_ip2_handler)(void);
-static void (*ath79_ip3_handler)(void);
+#include "machtypes.h"
static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc)
{
@@ -129,10 +129,10 @@ static void ar934x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS);
if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) {
- ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_PCIE);
+ ath79_ddr_wb_flush(3);
generic_handle_irq(ATH79_IP2_IRQ(0));
} else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) {
- ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_WMAC);
+ ath79_ddr_wb_flush(4);
generic_handle_irq(ATH79_IP2_IRQ(1));
} else {
spurious_interrupt();
@@ -235,128 +235,132 @@ static void qca955x_irq_init(void)
irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
}
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned long pending;
-
- pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
- if (pending & STATUSF_IP7)
- do_IRQ(ATH79_CPU_IRQ(7));
-
- else if (pending & STATUSF_IP2)
- ath79_ip2_handler();
-
- else if (pending & STATUSF_IP4)
- do_IRQ(ATH79_CPU_IRQ(4));
-
- else if (pending & STATUSF_IP5)
- do_IRQ(ATH79_CPU_IRQ(5));
-
- else if (pending & STATUSF_IP3)
- ath79_ip3_handler();
-
- else if (pending & STATUSF_IP6)
- do_IRQ(ATH79_CPU_IRQ(6));
-
- else
- spurious_interrupt();
-}
-
/*
* The IP2/IP3 lines are tied to a PCI/WMAC/USB device. Drivers for
* these devices typically allocate coherent DMA memory, however the
* DMA controller may still have some unsynchronized data in the FIFO.
* Issue a flush in the handlers to ensure that the driver sees
* the update.
+ *
+ * This array map the interrupt lines to the DDR write buffer channels.
*/
-static void ath79_default_ip2_handler(void)
-{
- do_IRQ(ATH79_CPU_IRQ(2));
-}
+static unsigned irq_wb_chan[8] = {
+ -1, -1, -1, -1, -1, -1, -1, -1,
+};
-static void ath79_default_ip3_handler(void)
+asmlinkage void plat_irq_dispatch(void)
{
- do_IRQ(ATH79_CPU_IRQ(3));
-}
+ unsigned long pending;
+ int irq;
-static void ar71xx_ip2_handler(void)
-{
- ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_PCI);
- do_IRQ(ATH79_CPU_IRQ(2));
-}
+ pending = read_c0_status() & read_c0_cause() & ST0_IM;
-static void ar724x_ip2_handler(void)
-{
- ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_PCIE);
- do_IRQ(ATH79_CPU_IRQ(2));
-}
+ if (!pending) {
+ spurious_interrupt();
+ return;
+ }
-static void ar913x_ip2_handler(void)
-{
- ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_WMAC);
- do_IRQ(ATH79_CPU_IRQ(2));
+ pending >>= CAUSEB_IP;
+ while (pending) {
+ irq = fls(pending) - 1;
+ if (irq < ARRAY_SIZE(irq_wb_chan) && irq_wb_chan[irq] != -1)
+ ath79_ddr_wb_flush(irq_wb_chan[irq]);
+ do_IRQ(MIPS_CPU_IRQ_BASE + irq);
+ pending &= ~BIT(irq);
+ }
}
-static void ar933x_ip2_handler(void)
+#ifdef CONFIG_IRQCHIP
+static int misc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
{
- ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_WMAC);
- do_IRQ(ATH79_CPU_IRQ(2));
+ irq_set_chip_and_handler(irq, &ath79_misc_irq_chip, handle_level_irq);
+ return 0;
}
-static void ar71xx_ip3_handler(void)
-{
- ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB);
- do_IRQ(ATH79_CPU_IRQ(3));
-}
+static const struct irq_domain_ops misc_irq_domain_ops = {
+ .xlate = irq_domain_xlate_onecell,
+ .map = misc_map,
+};
-static void ar724x_ip3_handler(void)
+static int __init ath79_misc_intc_of_init(
+ struct device_node *node, struct device_node *parent)
{
- ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_USB);
- do_IRQ(ATH79_CPU_IRQ(3));
-}
+ void __iomem *base = ath79_reset_base;
+ struct irq_domain *domain;
+ int irq;
-static void ar913x_ip3_handler(void)
-{
- ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_USB);
- do_IRQ(ATH79_CPU_IRQ(3));
-}
+ irq = irq_of_parse_and_map(node, 0);
+ if (!irq)
+ panic("Failed to get MISC IRQ");
-static void ar933x_ip3_handler(void)
-{
- ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_USB);
- do_IRQ(ATH79_CPU_IRQ(3));
+ domain = irq_domain_add_legacy(node, ATH79_MISC_IRQ_COUNT,
+ ATH79_MISC_IRQ_BASE, 0, &misc_irq_domain_ops, NULL);
+ if (!domain)
+ panic("Failed to add MISC irqdomain");
+
+ /* Disable and clear all interrupts */
+ __raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+ __raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS);
+
+
+ irq_set_chained_handler(irq, ath79_misc_irq_handler);
+
+ return 0;
}
+IRQCHIP_DECLARE(ath79_misc_intc, "qca,ar7100-misc-intc",
+ ath79_misc_intc_of_init);
-static void ar934x_ip3_handler(void)
+static int __init ar79_cpu_intc_of_init(
+ struct device_node *node, struct device_node *parent)
{
- ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_USB);
- do_IRQ(ATH79_CPU_IRQ(3));
+ int err, i, count;
+
+ /* Fill the irq_wb_chan table */
+ count = of_count_phandle_with_args(
+ node, "qca,ddr-wb-channels", "#qca,ddr-wb-channel-cells");
+
+ for (i = 0; i < count; i++) {
+ struct of_phandle_args args;
+ u32 irq = i;
+
+ of_property_read_u32_index(
+ node, "qca,ddr-wb-channel-interrupts", i, &irq);
+ if (irq >= ARRAY_SIZE(irq_wb_chan))
+ continue;
+
+ err = of_parse_phandle_with_args(
+ node, "qca,ddr-wb-channels",
+ "#qca,ddr-wb-channel-cells",
+ i, &args);
+ if (err)
+ return err;
+
+ irq_wb_chan[irq] = args.args[0];
+ pr_info("IRQ: Set flush channel of IRQ%d to %d\n",
+ irq, args.args[0]);
+ }
+
+ return mips_cpu_irq_of_init(node, parent);
}
+IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
+ ar79_cpu_intc_of_init);
+
+#endif
void __init arch_init_irq(void)
{
- if (soc_is_ar71xx()) {
- ath79_ip2_handler = ar71xx_ip2_handler;
- ath79_ip3_handler = ar71xx_ip3_handler;
- } else if (soc_is_ar724x()) {
- ath79_ip2_handler = ar724x_ip2_handler;
- ath79_ip3_handler = ar724x_ip3_handler;
- } else if (soc_is_ar913x()) {
- ath79_ip2_handler = ar913x_ip2_handler;
- ath79_ip3_handler = ar913x_ip3_handler;
- } else if (soc_is_ar933x()) {
- ath79_ip2_handler = ar933x_ip2_handler;
- ath79_ip3_handler = ar933x_ip3_handler;
+ if (mips_machtype == ATH79_MACH_GENERIC_OF) {
+ irqchip_init();
+ return;
+ }
+
+ if (soc_is_ar71xx() || soc_is_ar724x() ||
+ soc_is_ar913x() || soc_is_ar933x()) {
+ irq_wb_chan[2] = 3;
+ irq_wb_chan[3] = 2;
} else if (soc_is_ar934x()) {
- ath79_ip2_handler = ath79_default_ip2_handler;
- ath79_ip3_handler = ar934x_ip3_handler;
- } else if (soc_is_qca955x()) {
- ath79_ip2_handler = ath79_default_ip2_handler;
- ath79_ip3_handler = ath79_default_ip3_handler;
- } else {
- BUG();
+ irq_wb_chan[3] = 2;
}
mips_cpu_irq_init();
diff --git a/arch/mips/ath79/machtypes.h b/arch/mips/ath79/machtypes.h
index 2625405..a13db3d 100644
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -15,6 +15,7 @@
#include <asm/mips_machine.h>
enum ath79_mach_type {
+ ATH79_MACH_GENERIC_OF = -1, /* Device tree board */
ATH79_MACH_GENERIC = 0,
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 7fc8397..01a644f 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -17,12 +17,16 @@
#include <linux/bootmem.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
#include <asm/bootinfo.h>
#include <asm/idle.h>
#include <asm/time.h> /* for mips_hpt_frequency */
#include <asm/reboot.h> /* for _machine_{restart,halt} */
#include <asm/mips_machine.h>
+#include <asm/prom.h>
+#include <asm/fw/fw.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
@@ -194,17 +198,28 @@ unsigned int get_c0_compare_int(void)
void __init plat_mem_setup(void)
{
+ unsigned long fdt_start;
+
set_io_port_base(KSEG1);
+ /* Get the position of the FDT passed by the bootloader */
+ fdt_start = fw_getenvl("fdt_start");
+ if (fdt_start)
+ __dt_setup_arch((void *)KSEG0ADDR(fdt_start));
+#ifdef CONFIG_BUILTIN_DTB
+ else
+ __dt_setup_arch(__dtb_start);
+#endif
+
ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
AR71XX_RESET_SIZE);
ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
AR71XX_PLL_SIZE);
- ath79_ddr_base = ioremap_nocache(AR71XX_DDR_CTRL_BASE,
- AR71XX_DDR_CTRL_SIZE);
+ ath79_ddr_ctrl_init();
ath79_detect_sys_type();
- detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
+ if (mips_machtype != ATH79_MACH_GENERIC_OF)
+ detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
_machine_restart = ath79_restart;
_machine_halt = ath79_halt;
@@ -236,6 +251,10 @@ void __init plat_time_init(void)
static int __init ath79_setup(void)
{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ if (mips_machtype == ATH79_MACH_GENERIC_OF)
+ return 0;
+
ath79_gpio_init();
ath79_register_uart();
ath79_register_wdt();
@@ -247,6 +266,11 @@ static int __init ath79_setup(void)
arch_initcall(ath79_setup);
+void __init device_tree_init(void)
+{
+ unflatten_and_copy_device_tree();
+}
+
static void __init ath79_generic_init(void)
{
/* Nothing to do */
diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig
index fc21d36..51ed599 100644
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -25,7 +25,6 @@ config BCM47XX_BCMA
select BCMA
select BCMA_HOST_SOC
select BCMA_DRIVER_MIPS
- select BCMA_HOST_PCI if PCI
select BCMA_DRIVER_PCI_HOSTMODE if PCI
select BCMA_DRIVER_GPIO
default y
diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile
index d58c51b..66bea4e 100644
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -3,5 +3,5 @@
# under Linux.
#
-obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
+obj-y += irq.o prom.o serial.o setup.o time.o sprom.o
obj-y += board.o buttons.o leds.o workarounds.o
diff --git a/arch/mips/bcm47xx/board.c b/arch/mips/bcm47xx/board.c
index bd56415..a88975a 100644
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -149,6 +149,7 @@ struct bcm47xx_board_type_list2 bcm47xx_board_list_boot_hw[] __initconst = {
/* board_id */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = {
+ {{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"},
diff --git a/arch/mips/bcm47xx/buttons.c b/arch/mips/bcm47xx/buttons.c
index 276276a..08a4abf 100644
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -299,6 +299,13 @@ bcm47xx_buttons_linksys_wrtsl54gs[] __initconst = {
BCM47XX_GPIO_KEY(6, KEY_RESTART),
};
+/* Luxul */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_luxul_xwr_1750_v1[] = {
+ BCM47XX_GPIO_KEY(14, BTN_TASK),
+};
+
/* Microsoft */
static const struct gpio_keys_button
@@ -555,6 +562,10 @@ int __init bcm47xx_buttons_register(void)
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrtsl54gs);
break;
+ case BCM47XX_BOARD_LUXUL_XWR_1750_V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xwr_1750_v1);
+ break;
+
case BCM47XX_BOARD_MICROSOFT_MN700:
err = bcm47xx_copy_bdata(bcm47xx_buttons_microsoft_nm700);
break;
diff --git a/arch/mips/bcm47xx/leds.c b/arch/mips/bcm47xx/leds.c
index 0e4ade3..d20ae63 100644
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -370,6 +370,16 @@ bcm47xx_leds_linksys_wrtsl54gs[] __initconst = {
BCM47XX_GPIO_LED(7, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
};
+/* Luxul */
+
+static const struct gpio_led
+bcm47xx_leds_luxul_xwr_1750_v1[] __initconst = {
+ BCM47XX_GPIO_LED(5, "green", "5ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED_TRIGGER(13, "green", "status", 0, "timer"),
+ BCM47XX_GPIO_LED(15, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
/* Microsoft */
static const struct gpio_led
@@ -623,6 +633,10 @@ void __init bcm47xx_leds_register(void)
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrtsl54gs);
break;
+ case BCM47XX_BOARD_LUXUL_XWR_1750_V1:
+ bcm47xx_set_pdata(bcm47xx_leds_luxul_xwr_1750_v1);
+ break;
+
case BCM47XX_BOARD_MICROSOFT_MN700:
bcm47xx_set_pdata(bcm47xx_leds_microsoft_nm700);
break;
diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c
index ab698ba..135a540 100644
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -126,7 +126,7 @@ void __init prom_free_prom_memory(void)
/* Stripped version of tlb_init, with the call to build_tlb_refill_handler
* dropped. Calling it at this stage causes a hang.
*/
-void __cpuinit early_tlb_init(void)
+void early_tlb_init(void)
{
write_c0_pagemask(PM_DEFAULT_MASK);
write_c0_wired(0);
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 82ff9fd..98c075f 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -206,9 +206,6 @@ void __init bcm47xx_bus_setup(void)
err = bcma_host_soc_init(&bcm47xx_bus.bcma);
if (err)
panic("Failed to initialize BCMA bus (err %d)", err);
-
- bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo,
- NULL);
}
#endif
diff --git a/arch/mips/bcm47xx/sprom.c b/arch/mips/bcm47xx/sprom.c
index 68ebf23..2d5c7a7 100644
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -200,7 +200,13 @@ static void bcm47xx_sprom_fill_auto(struct ssb_sprom *sprom,
const char *pre = prefix;
bool fb = fallback;
+ /* Broadcom extracts it for rev 8+ but it was found on 2 and 4 too */
+ ENTRY(0xfffffffe, u16, pre, "devid", dev_id, 0, fallback);
+
ENTRY(0xfffffffe, u16, pre, "boardrev", board_rev, 0, true);
+ ENTRY(0xfffffffe, u32, pre, "boardflags", boardflags, 0, fb);
+ ENTRY(0xfffffff0, u32, pre, "boardflags2", boardflags2, 0, fb);
+ ENTRY(0xfffff800, u32, pre, "boardflags3", boardflags3, 0, fb);
ENTRY(0x00000002, u16, pre, "boardflags", boardflags_lo, 0, fb);
ENTRY(0xfffffffc, u16, pre, "boardtype", board_type, 0, true);
ENTRY(0xfffffffe, u16, pre, "boardnum", board_num, 0, fb);
@@ -409,27 +415,6 @@ static void bcm47xx_sprom_fill_auto(struct ssb_sprom *sprom,
}
#undef ENTRY /* It's specififc, uses local variable, don't use it (again). */
-static void bcm47xx_fill_sprom_r1234589(struct ssb_sprom *sprom,
- const char *prefix, bool fallback)
-{
- nvram_read_u16(prefix, NULL, "devid", &sprom->dev_id, 0, fallback);
- nvram_read_alpha2(prefix, "ccode", sprom->alpha2, fallback);
-}
-
-static void bcm47xx_fill_sprom_r3(struct ssb_sprom *sprom, const char *prefix,
- bool fallback)
-{
- nvram_read_leddc(prefix, "leddc", &sprom->leddc_on_time,
- &sprom->leddc_off_time, fallback);
-}
-
-static void bcm47xx_fill_sprom_r4589(struct ssb_sprom *sprom,
- const char *prefix, bool fallback)
-{
- nvram_read_leddc(prefix, "leddc", &sprom->leddc_on_time,
- &sprom->leddc_off_time, fallback);
-}
-
static void bcm47xx_fill_sprom_path_r4589(struct ssb_sprom *sprom,
const char *prefix, bool fallback)
{
@@ -528,6 +513,8 @@ static int mac_addr_used = 2;
static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
const char *prefix, bool fallback)
{
+ bool fb = fallback;
+
nvram_read_macaddr(prefix, "et0macaddr", sprom->et0mac, fallback);
nvram_read_u8(prefix, NULL, "et0mdcport", &sprom->et0mdcport, 0,
fallback);
@@ -540,6 +527,10 @@ static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
nvram_read_u8(prefix, NULL, "et1phyaddr", &sprom->et1phyaddr, 0,
fallback);
+ nvram_read_macaddr(prefix, "et2macaddr", sprom->et2mac, fb);
+ nvram_read_u8(prefix, NULL, "et2mdcport", &sprom->et2mdcport, 0, fb);
+ nvram_read_u8(prefix, NULL, "et2phyaddr", &sprom->et2phyaddr, 0, fb);
+
nvram_read_macaddr(prefix, "macaddr", sprom->il0mac, fallback);
nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
@@ -580,39 +571,22 @@ void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix,
nvram_read_u8(prefix, NULL, "sromrev", &sprom->revision, 0, fallback);
+ /* Entries requiring custom functions */
+ nvram_read_alpha2(prefix, "ccode", sprom->alpha2, fallback);
+ if (sprom->revision >= 3)
+ nvram_read_leddc(prefix, "leddc", &sprom->leddc_on_time,
+ &sprom->leddc_off_time, fallback);
+
switch (sprom->revision) {
- case 1:
- bcm47xx_fill_sprom_r1234589(sprom, prefix, fallback);
- break;
- case 2:
- bcm47xx_fill_sprom_r1234589(sprom, prefix, fallback);
- break;
- case 3:
- bcm47xx_fill_sprom_r1234589(sprom, prefix, fallback);
- bcm47xx_fill_sprom_r3(sprom, prefix, fallback);
- break;
case 4:
case 5:
- bcm47xx_fill_sprom_r1234589(sprom, prefix, fallback);
- bcm47xx_fill_sprom_r4589(sprom, prefix, fallback);
bcm47xx_fill_sprom_path_r4589(sprom, prefix, fallback);
bcm47xx_fill_sprom_path_r45(sprom, prefix, fallback);
break;
case 8:
- bcm47xx_fill_sprom_r1234589(sprom, prefix, fallback);
- bcm47xx_fill_sprom_r4589(sprom, prefix, fallback);
- bcm47xx_fill_sprom_path_r4589(sprom, prefix, fallback);
- break;
case 9:
- bcm47xx_fill_sprom_r1234589(sprom, prefix, fallback);
- bcm47xx_fill_sprom_r4589(sprom, prefix, fallback);
bcm47xx_fill_sprom_path_r4589(sprom, prefix, fallback);
break;
- default:
- pr_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
- sprom->revision);
- sprom->revision = 1;
- bcm47xx_fill_sprom_r1234589(sprom, prefix, fallback);
}
bcm47xx_sprom_fill_auto(sprom, prefix, fallback);
@@ -631,19 +605,6 @@ void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo,
}
#endif
-#ifdef CONFIG_BCM47XX_BCMA
-void bcm47xx_fill_bcma_boardinfo(struct bcma_boardinfo *boardinfo,
- const char *prefix)
-{
- nvram_read_u16(prefix, NULL, "boardvendor", &boardinfo->vendor, 0,
- true);
- if (!boardinfo->vendor)
- boardinfo->vendor = SSB_BOARDVENDOR_BCM;
-
- nvram_read_u16(prefix, NULL, "boardtype", &boardinfo->type, 0, true);
-}
-#endif
-
#if defined(CONFIG_BCM47XX_SSB)
static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
{
@@ -698,33 +659,46 @@ static void bcm47xx_sprom_apply_prefix_alias(char *prefix, size_t prefix_size)
static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
{
- char prefix[10];
+ struct bcma_boardinfo *binfo = &bus->boardinfo;
struct bcma_device *core;
+ char buf[10];
+ char *prefix;
+ bool fallback = false;
switch (bus->hosttype) {
case BCMA_HOSTTYPE_PCI:
memset(out, 0, sizeof(struct ssb_sprom));
- snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
+ snprintf(buf, sizeof(buf), "pci/%u/%u/",
bus->host_pci->bus->number + 1,
PCI_SLOT(bus->host_pci->devfn));
- bcm47xx_sprom_apply_prefix_alias(prefix, sizeof(prefix));
- bcm47xx_fill_sprom(out, prefix, false);
- return 0;
+ bcm47xx_sprom_apply_prefix_alias(buf, sizeof(buf));
+ prefix = buf;
+ break;
case BCMA_HOSTTYPE_SOC:
memset(out, 0, sizeof(struct ssb_sprom));
core = bcma_find_core(bus, BCMA_CORE_80211);
if (core) {
- snprintf(prefix, sizeof(prefix), "sb/%u/",
+ snprintf(buf, sizeof(buf), "sb/%u/",
core->core_index);
- bcm47xx_fill_sprom(out, prefix, true);
+ prefix = buf;
+ fallback = true;
} else {
- bcm47xx_fill_sprom(out, NULL, false);
+ prefix = NULL;
}
- return 0;
+ break;
default:
pr_warn("Unable to fill SPROM for given bustype.\n");
return -EINVAL;
}
+
+ nvram_read_u16(prefix, NULL, "boardvendor", &binfo->vendor, 0, true);
+ if (!binfo->vendor)
+ binfo->vendor = SSB_BOARDVENDOR_BCM;
+ nvram_read_u16(prefix, NULL, "boardtype", &binfo->type, 0, true);
+
+ bcm47xx_fill_sprom(out, prefix, fallback);
+
+ return 0;
}
#endif
diff --git a/arch/mips/bmips/Kconfig b/arch/mips/bmips/Kconfig
index f35c84c..e2c4fd6 100644
--- a/arch/mips/bmips/Kconfig
+++ b/arch/mips/bmips/Kconfig
@@ -57,6 +57,10 @@ config DT_BCM97425SVMB
bool "BCM97425SVMB"
select BUILTIN_DTB
+config DT_BCM97435SVMB
+ bool "BCM97435SVMB"
+ select BUILTIN_DTB
+
endchoice
endif
diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c
index fae800e..526ec27 100644
--- a/arch/mips/bmips/setup.c
+++ b/arch/mips/bmips/setup.c
@@ -149,6 +149,8 @@ void __init plat_mem_setup(void)
/* intended to somewhat resemble ARM; see Documentation/arm/Booting */
if (fw_arg0 == 0 && fw_arg1 == 0xffffffff)
dtb = phys_to_virt(fw_arg2);
+ else if (fw_arg0 == -2) /* UHI interface */
+ dtb = (void *)fw_arg1;
else if (__dtb_start != __dtb_end)
dtb = (void *)__dtb_start;
else
diff --git a/arch/mips/boot/compressed/head.S b/arch/mips/boot/compressed/head.S
index 409cb48..c580e85 100644
--- a/arch/mips/boot/compressed/head.S
+++ b/arch/mips/boot/compressed/head.S
@@ -25,6 +25,22 @@ start:
move s2, a2
move s3, a3
+#ifdef CONFIG_MIPS_ZBOOT_APPENDED_DTB
+ PTR_LA t0, __appended_dtb
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ li t1, 0xd00dfeed
+#else
+ li t1, 0xedfe0dd0
+#endif
+ lw t2, (t0)
+ bne t1, t2, not_found
+ nop
+
+ move s1, t0
+ PTR_LI s0, -2
+not_found:
+#endif
+
/* Clear BSS */
PTR_LA a0, _edata
PTR_LA a2, _end
diff --git a/arch/mips/boot/compressed/ld.script b/arch/mips/boot/compressed/ld.script
index 5a33409..2ed08fb 100644
--- a/arch/mips/boot/compressed/ld.script
+++ b/arch/mips/boot/compressed/ld.script
@@ -29,8 +29,12 @@ SECTIONS
*(.image)
__image_end = .;
CONSTRUCTORS
+ . = ALIGN(16);
}
- . = ALIGN(16);
+ __appended_dtb = .;
+ /* leave space for appended DTB */
+ . += 0x100000;
+
_edata = .;
/* End of data section */
diff --git a/arch/mips/boot/compressed/uart-16550.c b/arch/mips/boot/compressed/uart-16550.c
index 237494b..408799a 100644
--- a/arch/mips/boot/compressed/uart-16550.c
+++ b/arch/mips/boot/compressed/uart-16550.c
@@ -7,7 +7,7 @@
#include <asm/addrspace.h>
-#if defined(CONFIG_MACH_LOONGSON) || defined(CONFIG_MIPS_MALTA)
+#if defined(CONFIG_MACH_LOONGSON64) || defined(CONFIG_MIPS_MALTA)
#define UART_BASE 0x1fd003f8
#define PORT(offset) (CKSEG1ADDR(UART_BASE) + (offset))
#endif
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index 5d95e4b..778a340 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -1,8 +1,10 @@
dts-dirs += brcm
dts-dirs += cavium-octeon
+dts-dirs += ingenic
dts-dirs += lantiq
dts-dirs += mti
dts-dirs += netlogic
+dts-dirs += qca
dts-dirs += ralink
obj-y := $(addsuffix /, $(dts-dirs))
diff --git a/arch/mips/boot/dts/brcm/Makefile b/arch/mips/boot/dts/brcm/Makefile
index 1c8353b..eabeb60 100644
--- a/arch/mips/boot/dts/brcm/Makefile
+++ b/arch/mips/boot/dts/brcm/Makefile
@@ -9,6 +9,20 @@ dtb-$(CONFIG_DT_BCM97360SVMB) += bcm97360svmb.dtb
dtb-$(CONFIG_DT_BCM97362SVMB) += bcm97362svmb.dtb
dtb-$(CONFIG_DT_BCM97420C) += bcm97420c.dtb
dtb-$(CONFIG_DT_BCM97425SVMB) += bcm97425svmb.dtb
+dtb-$(CONFIG_DT_BCM97435SVMB) += bcm97435svmb.dtb
+
+dtb-$(CONFIG_DT_NONE) += \
+ bcm93384wvg.dtb \
+ bcm93384wvg_viper.dtb \
+ bcm96368mvwg.dtb \
+ bcm9ejtagprb.dtb \
+ bcm97125cbmb.dtb \
+ bcm97346dbsmb.dtb \
+ bcm97358svmb.dtb \
+ bcm97360svmb.dtb \
+ bcm97362svmb.dtb \
+ bcm97420c.dtb \
+ bcm97425svmb.dtb
obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
index 1f30728..d817bb4 100644
--- a/arch/mips/boot/dts/brcm/bcm7346.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -24,6 +24,8 @@
aliases {
uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
};
cpu_intc: cpu_intc {
@@ -118,6 +120,30 @@
status = "disabled";
};
+ uart1: serial@406940 {
+ compatible = "ns16550a";
+ reg = <0x406940 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <65>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406980 {
+ compatible = "ns16550a";
+ reg = <0x406980 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <66>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi
index 2c2aa93..277a90a 100644
--- a/arch/mips/boot/dts/brcm/bcm7358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi
@@ -18,6 +18,8 @@
aliases {
uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
};
cpu_intc: cpu_intc {
@@ -112,6 +114,30 @@
status = "disabled";
};
+ uart1: serial@406840 {
+ compatible = "ns16550a";
+ reg = <0x406840 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <62>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406880 {
+ compatible = "ns16550a";
+ reg = <0x406880 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <63>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi
index f23b0ae..9e1e571 100644
--- a/arch/mips/boot/dts/brcm/bcm7360.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi
@@ -18,6 +18,8 @@
aliases {
uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
};
cpu_intc: cpu_intc {
@@ -112,6 +114,30 @@
status = "disabled";
};
+ uart1: serial@406840 {
+ compatible = "ns16550a";
+ reg = <0x406840 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <62>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406880 {
+ compatible = "ns16550a";
+ reg = <0x406880 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <63>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi
index da99db6..6e65db8 100644
--- a/arch/mips/boot/dts/brcm/bcm7362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi
@@ -24,6 +24,8 @@
aliases {
uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
};
cpu_intc: cpu_intc {
@@ -118,6 +120,30 @@
status = "disabled";
};
+ uart1: serial@406840 {
+ compatible = "ns16550a";
+ reg = <0x406840 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <62>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406880 {
+ compatible = "ns16550a";
+ reg = <0x406880 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <63>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi
new file mode 100644
index 0000000..8b9432c
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
@@ -0,0 +1,239 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm7435";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <163125000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips5200";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips5200";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ compatible = "brcm,bmips5200";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "brcm,bmips5200";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: cpu_intc {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ uart_clk: uart_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <81000000>;
+ };
+ };
+
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges = <0 0x10000000 0x01000000>;
+
+ periph_intc: periph_intc@41b500 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x41b500 0x40>, <0x41b600 0x40>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ sun_l2_intc: sun_l2_intc@403000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x403000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <52>;
+ };
+
+ gisb-arb@400000 {
+ compatible = "brcm,bcm7400-gisb-arb";
+ reg = <0x400000 0xdc>;
+ native-endian;
+ interrupt-parent = <&sun_l2_intc>;
+ interrupts = <0>, <2>;
+ brcm,gisb-arb-master-mask = <0xf77f>;
+ brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "webcpu_0",
+ "pcie_0", "bsp_0",
+ "rdc_0", "raaga_0",
+ "avd_1", "jtag_0",
+ "svd_0", "vice_0",
+ "vice_1", "raaga_1",
+ "scpu";
+ };
+
+ upg_irq0_intc: upg_irq0_intc@406780 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x406780 0x8>;
+
+ brcm,int-map-mask = <0x44>;
+ brcm,int-fwd-mask = <0x70000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <60>;
+ };
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x51c>;
+ little-endian;
+ };
+
+ reboot {
+ compatible = "brcm,brcmstb-reboot";
+ syscon = <&sun_top_ctrl 0x304 0x308>;
+ };
+
+ uart0: serial@406b00 {
+ compatible = "ns16550a";
+ reg = <0x406b00 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <66>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ enet0: ethernet@b80000 {
+ phy-mode = "internal";
+ phy-handle = <&phy1>;
+ mac-address = [ 00 10 18 36 23 1a ];
+ compatible = "brcm,genet-v3";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0xb80000 0x11c88>;
+ interrupts = <17>, <18>;
+ interrupt-parent = <&periph_intc>;
+ status = "disabled";
+
+ mdio@e14 {
+ compatible = "brcm,genet-mdio-v3";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ reg = <0xe14 0x8>;
+
+ phy1: ethernet-phy@1 {
+ max-speed = <100>;
+ reg = <0x1>;
+ compatible = "brcm,40nm-ephy",
+ "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
+
+ ehci0: usb@480300 {
+ compatible = "brcm,bcm7435-ehci", "generic-ehci";
+ reg = <0x480300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <70>;
+ status = "disabled";
+ };
+
+ ohci0: usb@480400 {
+ compatible = "brcm,bcm7435-ohci", "generic-ohci";
+ reg = <0x480400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <72>;
+ status = "disabled";
+ };
+
+ ehci1: usb@480500 {
+ compatible = "brcm,bcm7435-ehci", "generic-ehci";
+ reg = <0x480500 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <71>;
+ status = "disabled";
+ };
+
+ ohci1: usb@480600 {
+ compatible = "brcm,bcm7435-ohci", "generic-ohci";
+ reg = <0x480600 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <73>;
+ status = "disabled";
+ };
+
+ ehci2: usb@490300 {
+ compatible = "brcm,bcm7435-ehci", "generic-ehci";
+ reg = <0x490300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <75>;
+ status = "disabled";
+ };
+
+ ohci2: usb@490400 {
+ compatible = "brcm,bcm7435-ohci", "generic-ohci";
+ reg = <0x490400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <77>;
+ status = "disabled";
+ };
+
+ ehci3: usb@490500 {
+ compatible = "brcm,bcm7435-ehci", "generic-ehci";
+ reg = <0x490500 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <76>;
+ status = "disabled";
+ };
+
+ ohci3: usb@490600 {
+ compatible = "brcm,bcm7435-ohci", "generic-ohci";
+ reg = <0x490600 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <78>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
index 70f196d..3fe0445 100644
--- a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
@@ -21,6 +21,14 @@
status = "okay";
};
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
index d18e6d9..a8dc01e 100644
--- a/arch/mips/boot/dts/brcm/bcm97358svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
@@ -21,6 +21,14 @@
status = "okay";
};
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
index 4fe5155..eee8b0e 100644
--- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
@@ -21,6 +21,14 @@
status = "okay";
};
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
index b7b88e5..739c2ef 100644
--- a/arch/mips/boot/dts/brcm/bcm97362svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
@@ -21,6 +21,14 @@
status = "okay";
};
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
diff --git a/arch/mips/boot/dts/brcm/bcm97435svmb.dts b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
new file mode 100644
index 0000000..1df0881
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
@@ -0,0 +1,60 @@
+/dts-v1/;
+
+/include/ "bcm7435.dtsi"
+
+/ {
+ compatible = "brcm,bcm97435svmb", "brcm,bcm7435";
+ model = "Broadcom BCM97435SVMB";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>,
+ <0x20000000 0x30000000>,
+ <0x90000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 maxcpus=1";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&enet0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/ingenic/Makefile b/arch/mips/boot/dts/ingenic/Makefile
new file mode 100644
index 0000000..f2b864f
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/Makefile
@@ -0,0 +1,10 @@
+dtb-$(CONFIG_JZ4740_QI_LB60) += qi_lb60.dtb
+dtb-$(CONFIG_JZ4780_CI20) += ci20.dtb
+
+obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
new file mode 100644
index 0000000..9fcb9e7
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -0,0 +1,44 @@
+/dts-v1/;
+
+#include "jz4780.dtsi"
+
+/ {
+ compatible = "img,ci20", "ingenic,jz4780";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x10000000
+ 0x30000000 0x30000000>;
+ };
+};
+
+&ext {
+ clock-frequency = <48000000>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
new file mode 100644
index 0000000..8b2437c
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -0,0 +1,68 @@
+#include <dt-bindings/clock/jz4740-cgu.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,jz4740";
+
+ cpuintc: interrupt-controller@0 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,jz4740-intc";
+ reg = <0x10001000 0x14>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ ext: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ rtc: rtc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: jz4740-cgu@10000000 {
+ compatible = "ingenic,jz4740-cgu";
+ reg = <0x10000000 0x100>;
+
+ clocks = <&ext>, <&rtc>;
+ clock-names = "ext", "rtc";
+
+ #clock-cells = <1>;
+ };
+
+ uart0: serial@10030000 {
+ compatible = "ingenic,jz4740-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <9>;
+
+ clocks = <&ext>, <&cgu JZ4740_CLK_UART0>;
+ clock-names = "baud", "module";
+ };
+
+ uart1: serial@10031000 {
+ compatible = "ingenic,jz4740-uart";
+ reg = <0x10031000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <8>;
+
+ clocks = <&ext>, <&cgu JZ4740_CLK_UART1>;
+ clock-names = "baud", "module";
+ };
+};
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
new file mode 100644
index 0000000..65389f6
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -0,0 +1,111 @@
+#include <dt-bindings/clock/jz4780-cgu.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,jz4780";
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,jz4780-intc";
+ reg = <0x10001000 0x50>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ ext: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ rtc: rtc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: jz4780-cgu@10000000 {
+ compatible = "ingenic,jz4780-cgu";
+ reg = <0x10000000 0x100>;
+
+ clocks = <&ext>, <&rtc>;
+ clock-names = "ext", "rtc";
+
+ #clock-cells = <1>;
+ };
+
+ uart0: serial@10030000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <51>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART0>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart1: serial@10031000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10031000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <50>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART1>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart2: serial@10032000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10032000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <49>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART2>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart3: serial@10033000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10033000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <48>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART3>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart4: serial@10034000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10034000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <34>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART4>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+};
diff --git a/arch/mips/boot/dts/ingenic/qi_lb60.dts b/arch/mips/boot/dts/ingenic/qi_lb60.dts
new file mode 100644
index 0000000..2414d63
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/qi_lb60.dts
@@ -0,0 +1,15 @@
+/dts-v1/;
+
+#include "jz4740.dtsi"
+
+/ {
+ compatible = "qi,lb60", "ingenic,jz4740";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+};
+
+&ext {
+ clock-frequency = <12000000>;
+};
diff --git a/arch/mips/boot/dts/mti/Makefile b/arch/mips/boot/dts/mti/Makefile
index ef1f3db..144d776 100644
--- a/arch/mips/boot/dts/mti/Makefile
+++ b/arch/mips/boot/dts/mti/Makefile
@@ -1,3 +1,4 @@
+dtb-$(CONFIG_MIPS_MALTA) += malta.dtb
dtb-$(CONFIG_MIPS_SEAD3) += sead3.dtb
obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
diff --git a/arch/mips/boot/dts/mti/malta.dts b/arch/mips/boot/dts/mti/malta.dts
new file mode 100644
index 0000000..c678115
--- /dev/null
+++ b/arch/mips/boot/dts/mti/malta.dts
@@ -0,0 +1,7 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mti,malta";
+};
diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile
new file mode 100644
index 0000000..2d61455d
--- /dev/null
+++ b/arch/mips/boot/dts/qca/Makefile
@@ -0,0 +1,11 @@
+# All DTBs
+dtb-$(CONFIG_ATH79) += ar9132_tl_wr1043nd_v1.dtb
+
+# Select a DTB to build in the kernel
+obj-$(CONFIG_DTB_TL_WR1043ND_V1) += ar9132_tl_wr1043nd_v1.dtb.o
+
+# Force kbuild to make empty built-in.o if necessary
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
new file mode 100644
index 0000000..4759cff
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -0,0 +1,133 @@
+/ {
+ compatible = "qca,ar9132";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips24Kc";
+ reg = <0>;
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+ <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+
+ apb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&miscintc>;
+
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,ar9132-ddr-controller",
+ "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart@18020000 {
+ compatible = "ns8250";
+ reg = <0x18020000 0x20>;
+ interrupts = <3>;
+
+ clocks = <&pll 2>;
+ clock-names = "uart";
+
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ no-loopback-test;
+
+ status = "disabled";
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,ar9132-gpio",
+ "qca,ar7100-gpio";
+ reg = <0x18040000 0x30>;
+ interrupts = <2>;
+
+ ngpios = <22>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,ar9132-ppl",
+ "qca,ar9130-pll";
+ reg = <0x18050000 0x20>;
+
+ clock-names = "ref";
+ /* The board must provides the ref clock */
+
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "ddr", "ahb";
+ };
+
+ wdt@18060008 {
+ compatible = "qca,ar7130-wdt";
+ reg = <0x18060008 0x8>;
+
+ interrupts = <4>;
+
+ clocks = <&pll 2>;
+ clock-names = "wdt";
+ };
+
+ miscintc: interrupt-controller@18060010 {
+ compatible = "qca,ar9132-misc-intc",
+ "qca,ar7100-misc-intc";
+ reg = <0x18060010 0x4>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ spi@1f000000 {
+ compatible = "qca,ar9132-spi", "qca,ar7100-spi";
+ reg = <0x1f000000 0x10>;
+
+ clocks = <&pll 2>;
+ clock-names = "ahb";
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
new file mode 100644
index 0000000..003015a
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -0,0 +1,112 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9132.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
+ model = "TP-Link TL-WR1043ND Version 1";
+
+ alias {
+ serial0 = "/ahb/apb/uart@18020000";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ extosc: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ ahb {
+ apb {
+ uart@18020000 {
+ status = "okay";
+ };
+
+ pll-controller@18050000 {
+ clocks = <&extosc>;
+ };
+ };
+
+ spi@1f000000 {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "s25sl064a";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ };
+
+ partition@1 {
+ label = "firmware";
+ reg = <0x020000 0x7D0000>;
+ };
+
+ partition@2 {
+ label = "art";
+ reg = <0x7F0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ poll-interval = <20>;
+ button@0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ button@1 {
+ label = "qss";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led@0 {
+ label = "tp-link:green:usb";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led@1 {
+ label = "tp-link:green:system";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led@2 {
+ label = "tp-link:green:qss";
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led@3 {
+ label = "tp-link:green:wlan";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index 10f7625..d8124a3 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -698,7 +698,9 @@ static void octeon_irq_ciu_gpio_ack(struct irq_data *data)
static void octeon_irq_handle_trigger(unsigned int irq, struct irq_desc *desc)
{
- if (irq_get_trigger_type(irq) & IRQ_TYPE_EDGE_BOTH)
+ struct irq_data *data = irq_desc_get_irq_data(desc);
+
+ if (irqd_get_trigger_type(data) & IRQ_TYPE_EDGE_BOTH)
handle_edge_irq(irq, desc);
else
handle_level_irq(irq, desc);
diff --git a/arch/mips/cobalt/mtd.c b/arch/mips/cobalt/mtd.c
index 8db7b5d..83e1b10 100644
--- a/arch/mips/cobalt/mtd.c
+++ b/arch/mips/cobalt/mtd.c
@@ -57,5 +57,4 @@ static int __init cobalt_mtd_init(void)
return 0;
}
-
-module_init(cobalt_mtd_init);
+device_initcall(cobalt_mtd_init);
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
new file mode 100644
index 0000000..4e36b6e
--- /dev/null
+++ b/arch/mips/configs/ci20_defconfig
@@ -0,0 +1,162 @@
+CONFIG_MACH_INGENIC=y
+CONFIG_JZ4780_CI20=y
+CONFIG_HIGHMEM=y
+# CONFIG_COMPACTION is not set
+CONFIG_CMA=y
+CONFIG_HZ_100=y
+CONFIG_PREEMPT=y
+# CONFIG_SECCOMP is not set
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_XZ=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=32
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_LEGACY_PTY_COUNT=2
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=5
+CONFIG_SERIAL_8250_RUNTIME_UARTS=5
+CONFIG_SERIAL_8250_INGENIC=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_JZ4780=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_MEMORY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_PANIC_TIMEOUT=10
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_STACKTRACE=y
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon console=ttyS4,115200 clk_ignore_unused"
diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig
index b2a577e..a75c65d 100644
--- a/arch/mips/configs/fuloong2e_defconfig
+++ b/arch/mips/configs/fuloong2e_defconfig
@@ -1,4 +1,4 @@
-CONFIG_MACH_LOONGSON=y
+CONFIG_MACH_LOONGSON64=y
CONFIG_64BIT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index 0cbc986..54cc385 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -1,4 +1,4 @@
-CONFIG_MACH_LOONGSON=y
+CONFIG_MACH_LOONGSON64=y
CONFIG_LEMOTE_MACH2F=y
CONFIG_CS5536_MFGPT=y
CONFIG_64BIT=y
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index c844299..f8bf915c 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -1,4 +1,4 @@
-CONFIG_MACH_LOONGSON=y
+CONFIG_MACH_LOONGSON64=y
CONFIG_SWIOTLB=y
CONFIG_LOONGSON_MACH3X=y
CONFIG_CPU_LOONGSON3=y
diff --git a/arch/mips/configs/ls1b_defconfig b/arch/mips/configs/ls1b_defconfig
index 7eb7554..1b2cc1f 100644
--- a/arch/mips/configs/ls1b_defconfig
+++ b/arch/mips/configs/ls1b_defconfig
@@ -1,4 +1,4 @@
-CONFIG_MACH_LOONGSON1=y
+CONFIG_MACH_LOONGSON32=y
CONFIG_PREEMPT=y
# CONFIG_SECCOMP is not set
CONFIG_EXPERIMENTAL=y
diff --git a/arch/mips/configs/maltasmvp_defconfig b/arch/mips/configs/maltasmvp_defconfig
index f8a3231..ac0eb4d 100644
--- a/arch/mips/configs/maltasmvp_defconfig
+++ b/arch/mips/configs/maltasmvp_defconfig
@@ -84,15 +84,12 @@ CONFIG_NET_CLS_IND=y
CONFIG_DEVTMPFS=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_PIIX=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
@@ -138,7 +135,6 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_HW_RANDOM=y
# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MATROX=y
@@ -152,7 +148,6 @@ CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
@@ -160,7 +155,11 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_CMOS=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
diff --git a/arch/mips/configs/pistachio_defconfig b/arch/mips/configs/pistachio_defconfig
index f22e92e..1646cce 100644
--- a/arch/mips/configs/pistachio_defconfig
+++ b/arch/mips/configs/pistachio_defconfig
@@ -272,6 +272,7 @@ CONFIG_IIO=y
CONFIG_CC10001_ADC=y
CONFIG_PWM=y
CONFIG_PWM_IMG=y
+CONFIG_PHY_PISTACHIO_USB=y
CONFIG_ANDROID=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
diff --git a/arch/mips/configs/qi_lb60_defconfig b/arch/mips/configs/qi_lb60_defconfig
index 2b96547..d7bb8cc 100644
--- a/arch/mips/configs/qi_lb60_defconfig
+++ b/arch/mips/configs/qi_lb60_defconfig
@@ -1,4 +1,4 @@
-CONFIG_MACH_JZ4740=y
+CONFIG_MACH_INGENIC=y
# CONFIG_COMPACTION is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_HZ_100=y
@@ -66,6 +66,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_INGENIC=y
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
CONFIG_SPI_GPIO=y
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
index 6156ac8..76317a7 100644
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -211,9 +211,13 @@
.endm
#ifdef TOOLCHAIN_SUPPORTS_MSA
+/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
+#undef fp
+
.macro _cfcmsa rd, cs
.set push
.set mips32r2
+ .set fp=64
.set msa
cfcmsa \rd, $\cs
.set pop
@@ -222,6 +226,7 @@
.macro _ctcmsa cd, rs
.set push
.set mips32r2
+ .set fp=64
.set msa
ctcmsa $\cd, \rs
.set pop
@@ -230,6 +235,7 @@
.macro ld_d wd, off, base
.set push
.set mips32r2
+ .set fp=64
.set msa
ld.d $w\wd, \off(\base)
.set pop
@@ -238,6 +244,7 @@
.macro st_d wd, off, base
.set push
.set mips32r2
+ .set fp=64
.set msa
st.d $w\wd, \off(\base)
.set pop
@@ -246,6 +253,7 @@
.macro copy_u_w ws, n
.set push
.set mips32r2
+ .set fp=64
.set msa
copy_u.w $1, $w\ws[\n]
.set pop
@@ -254,6 +262,7 @@
.macro copy_u_d ws, n
.set push
.set mips64r2
+ .set fp=64
.set msa
copy_u.d $1, $w\ws[\n]
.set pop
@@ -262,6 +271,7 @@
.macro insert_w wd, n
.set push
.set mips32r2
+ .set fp=64
.set msa
insert.w $w\wd[\n], $1
.set pop
@@ -270,6 +280,7 @@
.macro insert_d wd, n
.set push
.set mips64r2
+ .set fp=64
.set msa
insert.d $w\wd[\n], $1
.set pop
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index 0cf29bd..ce9666c 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -469,7 +469,7 @@ static inline int test_and_change_bit(unsigned long nr,
*/
static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
{
- smp_mb();
+ smp_mb__before_llsc();
__clear_bit(nr, addr);
}
diff --git a/arch/mips/include/asm/bmips-spaces.h b/arch/mips/include/asm/bmips-spaces.h
new file mode 100644
index 0000000..eb96541
--- /dev/null
+++ b/arch/mips/include/asm/bmips-spaces.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_BMIPS_SPACES_H
+#define __ASM_BMIPS_SPACES_H
+
+/* Avoid collisions with system base register (SBR) region on BMIPS3300 */
+#define FIXADDR_TOP ((unsigned long)(long)(int)0xff000000)
+
+#endif /* __ASM_BMIPS_SPACES_H */
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 5aeaf19..f25de77 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -108,6 +108,9 @@
#ifndef cpu_has_llsc
#define cpu_has_llsc (cpu_data[0].options & MIPS_CPU_LLSC)
#endif
+#ifndef cpu_has_bp_ghist
+#define cpu_has_bp_ghist (cpu_data[0].options & MIPS_CPU_BP_GHIST)
+#endif
#ifndef kernel_uses_llsc
#define kernel_uses_llsc cpu_has_llsc
#endif
diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h
index 33f3cab..d41e8e2 100644
--- a/arch/mips/include/asm/cpu-type.h
+++ b/arch/mips/include/asm/cpu-type.h
@@ -32,12 +32,12 @@ static inline int __pure __get_cpu_type(const int cpu_type)
case CPU_4KC:
case CPU_ALCHEMY:
case CPU_PR4450:
- case CPU_JZRISC:
#endif
#if defined(CONFIG_SYS_HAS_CPU_MIPS32_R1) || \
defined(CONFIG_SYS_HAS_CPU_MIPS32_R2)
case CPU_4KEC:
+ case CPU_JZRISC:
#endif
#ifdef CONFIG_SYS_HAS_CPU_MIPS32_R2
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index e3adca1..e46e406 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -42,7 +42,9 @@
#define PRID_COMP_LEXRA 0x0b0000
#define PRID_COMP_NETLOGIC 0x0c0000
#define PRID_COMP_CAVIUM 0x0d0000
-#define PRID_COMP_INGENIC 0xd00000
+#define PRID_COMP_INGENIC_D0 0xd00000 /* JZ4740, JZ4750 */
+#define PRID_COMP_INGENIC_D1 0xd10000 /* JZ4770, JZ4775 */
+#define PRID_COMP_INGENIC_E1 0xe10000 /* JZ4780 */
/*
* Assigned Processor ID (implementation) values for bits 15:8 of the PRId
@@ -168,7 +170,7 @@
#define PRID_IMP_CAVIUM_CN70XX 0x9600
/*
- * These are the PRID's for when 23:16 == PRID_COMP_INGENIC
+ * These are the PRID's for when 23:16 == PRID_COMP_INGENIC_*
*/
#define PRID_IMP_JZRISC 0x0200
@@ -379,6 +381,7 @@ enum cpu_type_enum {
#define MIPS_CPU_RW_LLB 0x1000000000ull /* LLADDR/LLB writes are allowed */
#define MIPS_CPU_XPA 0x2000000000ull /* CPU supports Extended Physical Addressing */
#define MIPS_CPU_CDMM 0x4000000000ull /* CPU has Common Device Memory Map */
+#define MIPS_CPU_BP_GHIST 0x8000000000ull /* R12K+ Branch Prediction Global History */
/*
* CPU ASE encodings
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index 4087b47..7b99efd 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -31,9 +31,15 @@
#define __mtc0_tlbw_hazard \
___ehb
+#define __mtc0_tlbr_hazard \
+ ___ehb
+
#define __tlbw_use_hazard \
___ehb
+#define __tlb_read_hazard \
+ ___ehb
+
#define __tlb_probe_hazard \
___ehb
@@ -80,12 +86,23 @@ do { \
___ssnop; \
___ehb
+#define __mtc0_tlbr_hazard \
+ ___ssnop; \
+ ___ssnop; \
+ ___ehb
+
#define __tlbw_use_hazard \
___ssnop; \
___ssnop; \
___ssnop; \
___ehb
+#define __tlb_read_hazard \
+ ___ssnop; \
+ ___ssnop; \
+ ___ssnop; \
+ ___ehb
+
#define __tlb_probe_hazard \
___ssnop; \
___ssnop; \
@@ -147,8 +164,12 @@ do { \
#define __mtc0_tlbw_hazard
+#define __mtc0_tlbr_hazard
+
#define __tlbw_use_hazard
+#define __tlb_read_hazard
+
#define __tlb_probe_hazard
#define __irq_enable_hazard
@@ -166,8 +187,12 @@ do { \
*/
#define __mtc0_tlbw_hazard
+#define __mtc0_tlbr_hazard
+
#define __tlbw_use_hazard
+#define __tlb_read_hazard
+
#define __tlb_probe_hazard
#define __irq_enable_hazard
@@ -196,11 +221,20 @@ do { \
nop; \
nop
+#define __mtc0_tlbr_hazard \
+ nop; \
+ nop
+
#define __tlbw_use_hazard \
nop; \
nop; \
nop
+#define __tlb_read_hazard \
+ nop; \
+ nop; \
+ nop
+
#define __tlb_probe_hazard \
nop; \
nop; \
@@ -267,7 +301,9 @@ do { \
#define _ssnop ___ssnop
#define _ehb ___ehb
#define mtc0_tlbw_hazard __mtc0_tlbw_hazard
+#define mtc0_tlbr_hazard __mtc0_tlbr_hazard
#define tlbw_use_hazard __tlbw_use_hazard
+#define tlb_read_hazard __tlb_read_hazard
#define tlb_probe_hazard __tlb_probe_hazard
#define irq_enable_hazard __irq_enable_hazard
#define irq_disable_hazard __irq_disable_hazard
@@ -300,6 +336,14 @@ do { \
} while (0)
+#define mtc0_tlbr_hazard() \
+do { \
+ __asm__ __volatile__( \
+ __stringify(__mtc0_tlbr_hazard) \
+ ); \
+} while (0)
+
+
#define tlbw_use_hazard() \
do { \
__asm__ __volatile__( \
@@ -308,6 +352,14 @@ do { \
} while (0)
+#define tlb_read_hazard() \
+do { \
+ __asm__ __volatile__( \
+ __stringify(__tlb_read_hazard) \
+ ); \
+} while (0)
+
+
#define tlb_probe_hazard() \
do { \
__asm__ __volatile__( \
diff --git a/arch/mips/include/asm/i8259.h b/arch/mips/include/asm/i8259.h
index c7e2784..a7fbcd6 100644
--- a/arch/mips/include/asm/i8259.h
+++ b/arch/mips/include/asm/i8259.h
@@ -41,6 +41,7 @@ extern int i8259A_irq_pending(unsigned int irq);
extern void make_8259A_irq(unsigned int irq);
extern void init_i8259_irqs(void);
+extern int i8259_of_init(struct device_node *node, struct device_node *parent);
/*
* Do the traditional i8259 interrupt polling thing. This is for the few
diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h
index d60cc68..e7b138b 100644
--- a/arch/mips/include/asm/irqflags.h
+++ b/arch/mips/include/asm/irqflags.h
@@ -60,7 +60,7 @@ static inline void arch_local_irq_restore(unsigned long flags)
" .set push \n"
" .set noreorder \n"
" .set noat \n"
-#if defined(CONFIG_IRQ_CPU)
+#if defined(CONFIG_IRQ_MIPS_CPU)
/*
* Slow, but doesn't suffer from a relatively unlikely race
* condition we're having since days 1.
@@ -90,7 +90,7 @@ static inline void __arch_local_irq_restore(unsigned long flags)
" .set push \n"
" .set noreorder \n"
" .set noat \n"
-#if defined(CONFIG_IRQ_CPU)
+#if defined(CONFIG_IRQ_MIPS_CPU)
/*
* Slow, but doesn't suffer from a relatively unlikely race
* condition we're having since days 1.
diff --git a/arch/mips/include/asm/kgdb.h b/arch/mips/include/asm/kgdb.h
index e6c0b0e..69dc0df 100644
--- a/arch/mips/include/asm/kgdb.h
+++ b/arch/mips/include/asm/kgdb.h
@@ -33,7 +33,6 @@
#define CACHE_FLUSH_IS_SAFE 0
extern void arch_kgdb_breakpoint(void);
-extern int kgdb_early_setup;
extern void *saved_vectors[32];
extern void handle_exception(struct pt_regs *regs);
extern void breakinst(void);
diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
index cd41e93..aa3800c 100644
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -157,8 +157,8 @@
#define AR71XX_PLL_REG_ETH0_INT_CLOCK 0x10
#define AR71XX_PLL_REG_ETH1_INT_CLOCK 0x14
-#define AR71XX_PLL_DIV_SHIFT 3
-#define AR71XX_PLL_DIV_MASK 0x1f
+#define AR71XX_PLL_FB_SHIFT 3
+#define AR71XX_PLL_FB_MASK 0x1f
#define AR71XX_CPU_DIV_SHIFT 16
#define AR71XX_CPU_DIV_MASK 0x3
#define AR71XX_DDR_DIV_SHIFT 18
@@ -169,8 +169,8 @@
#define AR724X_PLL_REG_CPU_CONFIG 0x00
#define AR724X_PLL_REG_PCIE_CONFIG 0x18
-#define AR724X_PLL_DIV_SHIFT 0
-#define AR724X_PLL_DIV_MASK 0x3ff
+#define AR724X_PLL_FB_SHIFT 0
+#define AR724X_PLL_FB_MASK 0x3ff
#define AR724X_PLL_REF_DIV_SHIFT 10
#define AR724X_PLL_REF_DIV_MASK 0xf
#define AR724X_AHB_DIV_SHIFT 19
@@ -183,8 +183,8 @@
#define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14
#define AR913X_PLL_REG_ETH1_INT_CLOCK 0x18
-#define AR913X_PLL_DIV_SHIFT 0
-#define AR913X_PLL_DIV_MASK 0x3ff
+#define AR913X_PLL_FB_SHIFT 0
+#define AR913X_PLL_FB_MASK 0x3ff
#define AR913X_DDR_DIV_SHIFT 22
#define AR913X_DDR_DIV_MASK 0x3
#define AR913X_AHB_DIV_SHIFT 19
diff --git a/arch/mips/include/asm/mach-ath79/ath79.h b/arch/mips/include/asm/mach-ath79/ath79.h
index 1557934..4eee221 100644
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -115,7 +115,8 @@ static inline int soc_is_qca955x(void)
return soc_is_qca9556() || soc_is_qca9558();
}
-extern void __iomem *ath79_ddr_base;
+void ath79_ddr_set_pci_windows(void);
+
extern void __iomem *ath79_pll_base;
extern void __iomem *ath79_reset_base;
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
index 8ed77f6..1461c10 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -52,10 +52,6 @@ void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix,
void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo,
const char *prefix);
#endif
-#ifdef CONFIG_BCM47XX_BCMA
-void bcm47xx_fill_bcma_boardinfo(struct bcma_boardinfo *boardinfo,
- const char *prefix);
-#endif
void bcm47xx_set_system_type(u16 chip_id);
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
index c41d1dce1..2afb840 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -80,6 +80,8 @@ enum bcm47xx_board {
BCM47XX_BOARD_LINKSYS_WRT610NV2,
BCM47XX_BOARD_LINKSYS_WRTSL54GS,
+ BCM47XX_BOARD_LUXUL_XWR_1750_V1,
+
BCM47XX_BOARD_MICROSOFT_MN700,
BCM47XX_BOARD_MOTOROLA_WE800G,
diff --git a/arch/mips/include/asm/mach-bcm63xx/spaces.h b/arch/mips/include/asm/mach-bcm63xx/spaces.h
index 61e750f..1410ed0 100644
--- a/arch/mips/include/asm/mach-bcm63xx/spaces.h
+++ b/arch/mips/include/asm/mach-bcm63xx/spaces.h
@@ -10,7 +10,7 @@
#ifndef _ASM_BCM63XX_SPACES_H
#define _ASM_BCM63XX_SPACES_H
-#define FIXADDR_TOP ((unsigned long)(long)(int)0xff000000)
+#include <asm/bmips-spaces.h>
#include <asm/mach-generic/spaces.h>
diff --git a/arch/mips/include/asm/mach-bmips/spaces.h b/arch/mips/include/asm/mach-bmips/spaces.h
index 1b05bdd..c59b28f 100644
--- a/arch/mips/include/asm/mach-bmips/spaces.h
+++ b/arch/mips/include/asm/mach-bmips/spaces.h
@@ -11,7 +11,7 @@
#define _ASM_BMIPS_SPACES_H
/* Avoid collisions with system base register (SBR) region on BMIPS3300 */
-#define FIXADDR_TOP ((unsigned long)(long)(int)0xff000000)
+#include <asm/bmips-spaces.h>
#include <asm/mach-generic/spaces.h>
diff --git a/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h b/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h
index bdf045f..21eae03 100644
--- a/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h
@@ -14,6 +14,13 @@
/* Generic ones first. */
#define cpu_has_tlb 1
+#define cpu_has_tlbinv 0
+#define cpu_has_segments 0
+#define cpu_has_eva 0
+#define cpu_has_htw 0
+#define cpu_has_rixiex 0
+#define cpu_has_maar 0
+#define cpu_has_rw_llb 0
#define cpu_has_tx39_cache 0
#define cpu_has_divec 0
#define cpu_has_prefetch 0
@@ -24,6 +31,7 @@
#define cpu_has_mips3d 0
#define cpu_has_smartmips 0
#define cpu_has_rixi 0
+#define cpu_has_xpa 0
#define cpu_has_vtag_icache 0
#define cpu_has_ic_fills_f_dc 0
#define cpu_has_pindexed_dcache 0
@@ -36,11 +44,18 @@
#define cpu_has_mips64r1 0
#define cpu_has_mips64r2 0
#define cpu_has_dsp 0
+#define cpu_has_dsp2 0
#define cpu_has_mipsmt 0
#define cpu_has_userlocal 0
+#define cpu_hwrena_impl_bits 0
+#define cpu_has_perf_cntr_intr_bit 0
+#define cpu_has_vz 0
+#define cpu_has_fre 0
+#define cpu_has_cdmm 0
/* R3k-specific ones. */
#ifdef CONFIG_CPU_R3000
+#define cpu_has_3kex 1
#define cpu_has_4kex 0
#define cpu_has_3k_cache 1
#define cpu_has_4k_cache 0
@@ -63,6 +78,7 @@
/* R4k-specific ones. */
#ifdef CONFIG_CPU_R4X00
+#define cpu_has_3kex 0
#define cpu_has_4kex 1
#define cpu_has_3k_cache 0
#define cpu_has_4k_cache 1
diff --git a/arch/mips/include/asm/mach-generic/irq.h b/arch/mips/include/asm/mach-generic/irq.h
index 050e18b..be546a0 100644
--- a/arch/mips/include/asm/mach-generic/irq.h
+++ b/arch/mips/include/asm/mach-generic/irq.h
@@ -18,7 +18,7 @@
#endif
#endif
-#ifdef CONFIG_IRQ_CPU
+#ifdef CONFIG_IRQ_MIPS_CPU
#ifndef MIPS_CPU_IRQ_BASE
#ifdef CONFIG_I8259
@@ -34,7 +34,7 @@
#endif
#endif
-#endif /* CONFIG_IRQ_CPU */
+#endif /* CONFIG_IRQ_MIPS_CPU */
#ifdef CONFIG_MIPS_GIC
#ifndef MIPS_GIC_IRQ_BASE
diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h
index 9488fa5..afc96ec 100644
--- a/arch/mips/include/asm/mach-generic/spaces.h
+++ b/arch/mips/include/asm/mach-generic/spaces.h
@@ -94,7 +94,11 @@
#endif
#ifndef FIXADDR_TOP
+#ifdef CONFIG_KVM_GUEST
+#define FIXADDR_TOP ((unsigned long)(long)(int)0x7ffe0000)
+#else
#define FIXADDR_TOP ((unsigned long)(long)(int)0xfffe0000)
#endif
+#endif
#endif /* __ASM_MACH_GENERIC_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
index d6111aa..7449794 100644
--- a/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
@@ -11,47 +11,69 @@
#include <asm/cpu.h>
/*
- * IP27 only comes with R10000 family processors all using the same config
+ * IP27 only comes with R1x000 family processors, all using the same config
*/
-#define cpu_has_watch 1
-#define cpu_has_mips16 0
-#define cpu_has_divec 0
-#define cpu_has_vce 0
-#define cpu_has_cache_cdex_p 0
-#define cpu_has_cache_cdex_s 0
-#define cpu_has_prefetch 1
-#define cpu_has_mcheck 0
-#define cpu_has_ejtag 0
+#define cpu_has_tlb 1
+#define cpu_has_tlbinv 0
+#define cpu_has_segments 0
+#define cpu_has_eva 0
+#define cpu_has_htw 0
+#define cpu_has_rixiex 0
+#define cpu_has_maar 0
+#define cpu_has_rw_llb 0
+#define cpu_has_3kex 0
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_6k_cache 0
+#define cpu_has_8k_cache 0
+#define cpu_has_tx39_cache 0
+#define cpu_has_fpu 1
+#define cpu_has_nofpuex 0
+#define cpu_has_32fpr 1
+#define cpu_has_counter 1
+#define cpu_has_watch 1
+#define cpu_has_64bits 1
+#define cpu_has_divec 0
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 1
+#define cpu_has_mcheck 0
+#define cpu_has_ejtag 0
+#define cpu_has_llsc 1
+#define cpu_has_mips16 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+#define cpu_has_rixi 0
+#define cpu_has_xpa 0
+#define cpu_has_vtag_icache 0
+#define cpu_has_dc_aliases 0
+#define cpu_has_ic_fills_f_dc 0
-#define cpu_has_llsc 1
-#define cpu_has_vtag_icache 0
-#define cpu_has_dc_aliases 0
-#define cpu_has_ic_fills_f_dc 0
-#define cpu_has_dsp 0
-#define cpu_has_dsp2 0
#define cpu_icache_snoops_remote_store 1
-#define cpu_has_mipsmt 0
-#define cpu_has_userlocal 0
-#define cpu_has_nofpuex 0
-#define cpu_has_64bits 1
-
-#define cpu_has_4kex 1
-#define cpu_has_3k_cache 0
-#define cpu_has_6k_cache 0
-#define cpu_has_4k_cache 1
-#define cpu_has_8k_cache 0
-#define cpu_has_tx39_cache 0
+#define cpu_has_mips32r1 0
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+#define cpu_has_mips32r6 0
+#define cpu_has_mips64r6 0
+#define cpu_has_dsp 0
+#define cpu_has_dsp2 0
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
#define cpu_has_inclusive_pcaches 1
+#define cpu_hwrena_impl_bits 0
+#define cpu_has_perf_cntr_intr_bit 0
+#define cpu_has_vz 0
+#define cpu_has_fre 0
+#define cpu_has_cdmm 0
-#define cpu_dcache_line_size() 32
-#define cpu_icache_line_size() 64
-#define cpu_scache_line_size() 128
-
-#define cpu_has_mips32r1 0
-#define cpu_has_mips32r2 0
-#define cpu_has_mips64r1 0
-#define cpu_has_mips64r2 0
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 64
+#define cpu_scache_line_size() 128
#endif /* __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-jz4740/clock.h b/arch/mips/include/asm/mach-jz4740/clock.h
index 16659cd..104d2df 100644
--- a/arch/mips/include/asm/mach-jz4740/clock.h
+++ b/arch/mips/include/asm/mach-jz4740/clock.h
@@ -22,6 +22,9 @@ enum jz4740_wait_mode {
void jz4740_clock_set_wait_mode(enum jz4740_wait_mode mode);
+void jz4740_clock_suspend(void);
+void jz4740_clock_resume(void);
+
void jz4740_clock_udc_enable_auto_suspend(void);
void jz4740_clock_udc_disable_auto_suspend(void);
diff --git a/arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h b/arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h
index a225baa..0933f94 100644
--- a/arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h
@@ -12,8 +12,6 @@
#define cpu_has_3k_cache 0
#define cpu_has_4k_cache 1
#define cpu_has_tx39_cache 0
-#define cpu_has_fpu 0
-#define cpu_has_32fpr 0
#define cpu_has_counter 0
#define cpu_has_watch 1
#define cpu_has_divec 1
@@ -34,7 +32,6 @@
#define cpu_has_ic_fills_f_dc 0
#define cpu_has_pindexed_dcache 0
#define cpu_has_mips32r1 1
-#define cpu_has_mips32r2 0
#define cpu_has_mips64r1 0
#define cpu_has_mips64r2 0
#define cpu_has_dsp 0
diff --git a/arch/mips/include/asm/mach-jz4740/irq.h b/arch/mips/include/asm/mach-jz4740/irq.h
index df50736..9b439fc 100644
--- a/arch/mips/include/asm/mach-jz4740/irq.h
+++ b/arch/mips/include/asm/mach-jz4740/irq.h
@@ -19,6 +19,12 @@
#define MIPS_CPU_IRQ_BASE 0
#define JZ4740_IRQ_BASE 8
+#ifdef CONFIG_MACH_JZ4740
+# define NR_INTC_IRQS 32
+#else
+# define NR_INTC_IRQS 64
+#endif
+
/* 1st-level interrupts */
#define JZ4740_IRQ(x) (JZ4740_IRQ_BASE + (x))
#define JZ4740_IRQ_I2C JZ4740_IRQ(1)
@@ -44,13 +50,15 @@
#define JZ4740_IRQ_IPU JZ4740_IRQ(29)
#define JZ4740_IRQ_LCD JZ4740_IRQ(30)
+#define JZ4780_IRQ_TCU2 JZ4740_IRQ(25)
+
/* 2nd-level interrupts */
-#define JZ4740_IRQ_DMA(x) (JZ4740_IRQ(32) + (x))
+#define JZ4740_IRQ_DMA(x) (JZ4740_IRQ(NR_INTC_IRQS) + (x))
#define JZ4740_IRQ_INTC_GPIO(x) (JZ4740_IRQ_GPIO0 - (x))
-#define JZ4740_IRQ_GPIO(x) (JZ4740_IRQ(48) + (x))
+#define JZ4740_IRQ_GPIO(x) (JZ4740_IRQ(NR_INTC_IRQS + 16) + (x))
-#define JZ4740_IRQ_ADC_BASE JZ4740_IRQ(176)
+#define JZ4740_IRQ_ADC_BASE JZ4740_IRQ(NR_INTC_IRQS + 144)
#define NR_IRQS (JZ4740_IRQ_ADC_BASE + 6)
diff --git a/arch/mips/include/asm/mach-jz4740/platform.h b/arch/mips/include/asm/mach-jz4740/platform.h
index 069b43a..32cfbe6 100644
--- a/arch/mips/include/asm/mach-jz4740/platform.h
+++ b/arch/mips/include/asm/mach-jz4740/platform.h
@@ -35,6 +35,4 @@ extern struct platform_device jz4740_wdt_device;
extern struct platform_device jz4740_pwm_device;
extern struct platform_device jz4740_dma_device;
-void jz4740_serial_device_register(void);
-
#endif
diff --git a/arch/mips/include/asm/mach-loongson/workarounds.h b/arch/mips/include/asm/mach-loongson/workarounds.h
deleted file mode 100644
index e180c14..0000000
--- a/arch/mips/include/asm/mach-loongson/workarounds.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_LOONGSON_WORKAROUNDS_H_
-#define __ASM_MACH_LOONGSON_WORKAROUNDS_H_
-
-#define WORKAROUND_CPUFREQ 0x00000001
-#define WORKAROUND_CPUHOTPLUG 0x00000002
-
-#endif
diff --git a/arch/mips/include/asm/mach-loongson1/cpufreq.h b/arch/mips/include/asm/mach-loongson32/cpufreq.h
index e7765ce..6843fa1 100644
--- a/arch/mips/include/asm/mach-loongson1/cpufreq.h
+++ b/arch/mips/include/asm/mach-loongson32/cpufreq.h
@@ -10,8 +10,8 @@
*/
-#ifndef __ASM_MACH_LOONGSON1_CPUFREQ_H
-#define __ASM_MACH_LOONGSON1_CPUFREQ_H
+#ifndef __ASM_MACH_LOONGSON32_CPUFREQ_H
+#define __ASM_MACH_LOONGSON32_CPUFREQ_H
struct plat_ls1x_cpufreq {
const char *clk_name; /* CPU clk */
@@ -20,4 +20,4 @@ struct plat_ls1x_cpufreq {
unsigned int min_freq; /* in kHz */
};
-#endif /* __ASM_MACH_LOONGSON1_CPUFREQ_H */
+#endif /* __ASM_MACH_LOONGSON32_CPUFREQ_H */
diff --git a/arch/mips/include/asm/mach-loongson1/irq.h b/arch/mips/include/asm/mach-loongson32/irq.h
index 96bfb1c..0d35b99 100644
--- a/arch/mips/include/asm/mach-loongson1/irq.h
+++ b/arch/mips/include/asm/mach-loongson32/irq.h
@@ -10,8 +10,8 @@
*/
-#ifndef __ASM_MACH_LOONGSON1_IRQ_H
-#define __ASM_MACH_LOONGSON1_IRQ_H
+#ifndef __ASM_MACH_LOONGSON32_IRQ_H
+#define __ASM_MACH_LOONGSON32_IRQ_H
/*
* CPU core Interrupt Numbers
@@ -70,4 +70,4 @@
#define NR_IRQS (MIPS_CPU_IRQS + LS1X_IRQS)
-#endif /* __ASM_MACH_LOONGSON1_IRQ_H */
+#endif /* __ASM_MACH_LOONGSON32_IRQ_H */
diff --git a/arch/mips/include/asm/mach-loongson1/loongson1.h b/arch/mips/include/asm/mach-loongson32/loongson1.h
index 20e0c2b..12aa129 100644
--- a/arch/mips/include/asm/mach-loongson1/loongson1.h
+++ b/arch/mips/include/asm/mach-loongson32/loongson1.h
@@ -10,8 +10,8 @@
*/
-#ifndef __ASM_MACH_LOONGSON1_LOONGSON1_H
-#define __ASM_MACH_LOONGSON1_LOONGSON1_H
+#ifndef __ASM_MACH_LOONGSON32_LOONGSON1_H
+#define __ASM_MACH_LOONGSON32_LOONGSON1_H
#define DEFAULT_MEMSIZE 256 /* If no memsize provided */
@@ -47,4 +47,4 @@
#include <regs-pwm.h>
#include <regs-wdt.h>
-#endif /* __ASM_MACH_LOONGSON1_LOONGSON1_H */
+#endif /* __ASM_MACH_LOONGSON32_LOONGSON1_H */
diff --git a/arch/mips/include/asm/mach-loongson1/platform.h b/arch/mips/include/asm/mach-loongson32/platform.h
index 47de55e..c32f03f 100644
--- a/arch/mips/include/asm/mach-loongson1/platform.h
+++ b/arch/mips/include/asm/mach-loongson32/platform.h
@@ -8,8 +8,8 @@
*/
-#ifndef __ASM_MACH_LOONGSON1_PLATFORM_H
-#define __ASM_MACH_LOONGSON1_PLATFORM_H
+#ifndef __ASM_MACH_LOONGSON32_PLATFORM_H
+#define __ASM_MACH_LOONGSON32_PLATFORM_H
#include <linux/platform_device.h>
@@ -23,4 +23,4 @@ extern struct platform_device ls1x_rtc_pdev;
extern void __init ls1x_clk_init(void);
extern void __init ls1x_serial_setup(struct platform_device *pdev);
-#endif /* __ASM_MACH_LOONGSON1_PLATFORM_H */
+#endif /* __ASM_MACH_LOONGSON32_PLATFORM_H */
diff --git a/arch/mips/include/asm/mach-loongson1/prom.h b/arch/mips/include/asm/mach-loongson32/prom.h
index 34859a4..a08503c 100644
--- a/arch/mips/include/asm/mach-loongson1/prom.h
+++ b/arch/mips/include/asm/mach-loongson32/prom.h
@@ -7,8 +7,8 @@
* option) any later version.
*/
-#ifndef __ASM_MACH_LOONGSON1_PROM_H
-#define __ASM_MACH_LOONGSON1_PROM_H
+#ifndef __ASM_MACH_LOONGSON32_PROM_H
+#define __ASM_MACH_LOONGSON32_PROM_H
#include <linux/io.h>
#include <linux/init.h>
@@ -21,4 +21,4 @@ extern unsigned long memsize, highmemsize;
extern char *prom_getenv(char *name);
extern void __init prom_init_cmdline(void);
-#endif /* __ASM_MACH_LOONGSON1_PROM_H */
+#endif /* __ASM_MACH_LOONGSON32_PROM_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-clk.h b/arch/mips/include/asm/mach-loongson32/regs-clk.h
index ee2445b..1f5a715 100644
--- a/arch/mips/include/asm/mach-loongson1/regs-clk.h
+++ b/arch/mips/include/asm/mach-loongson32/regs-clk.h
@@ -9,8 +9,8 @@
* option) any later version.
*/
-#ifndef __ASM_MACH_LOONGSON1_REGS_CLK_H
-#define __ASM_MACH_LOONGSON1_REGS_CLK_H
+#ifndef __ASM_MACH_LOONGSON32_REGS_CLK_H
+#define __ASM_MACH_LOONGSON32_REGS_CLK_H
#define LS1X_CLK_REG(x) \
((void __iomem *)KSEG1ADDR(LS1X_CLK_BASE + (x)))
@@ -48,4 +48,4 @@
#define BYPASS_DDR_WIDTH 1
#define BYPASS_CPU_WIDTH 1
-#endif /* __ASM_MACH_LOONGSON1_REGS_CLK_H */
+#endif /* __ASM_MACH_LOONGSON32_REGS_CLK_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-mux.h b/arch/mips/include/asm/mach-loongson32/regs-mux.h
index fb1e36e..8302d92 100644
--- a/arch/mips/include/asm/mach-loongson1/regs-mux.h
+++ b/arch/mips/include/asm/mach-loongson32/regs-mux.h
@@ -9,8 +9,8 @@
* option) any later version.
*/
-#ifndef __ASM_MACH_LOONGSON1_REGS_MUX_H
-#define __ASM_MACH_LOONGSON1_REGS_MUX_H
+#ifndef __ASM_MACH_LOONGSON32_REGS_MUX_H
+#define __ASM_MACH_LOONGSON32_REGS_MUX_H
#define LS1X_MUX_REG(x) \
((void __iomem *)KSEG1ADDR(LS1X_MUX_BASE + (x)))
@@ -64,4 +64,4 @@
#define GMAC1_USE_PWM23 (0x1 << 1)
#define GMAC0_USE_PWM01 0x1
-#endif /* __ASM_MACH_LOONGSON1_REGS_MUX_H */
+#endif /* __ASM_MACH_LOONGSON32_REGS_MUX_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-pwm.h b/arch/mips/include/asm/mach-loongson32/regs-pwm.h
index 99f2bcc..69f174e 100644
--- a/arch/mips/include/asm/mach-loongson1/regs-pwm.h
+++ b/arch/mips/include/asm/mach-loongson32/regs-pwm.h
@@ -9,8 +9,8 @@
* option) any later version.
*/
-#ifndef __ASM_MACH_LOONGSON1_REGS_PWM_H
-#define __ASM_MACH_LOONGSON1_REGS_PWM_H
+#ifndef __ASM_MACH_LOONGSON32_REGS_PWM_H
+#define __ASM_MACH_LOONGSON32_REGS_PWM_H
/* Loongson 1 PWM Timer Register Definitions */
#define PWM_CNT 0x0
@@ -26,4 +26,4 @@
#define PWM_OE (0x1 << 3)
#define CNT_EN 0x1
-#endif /* __ASM_MACH_LOONGSON1_REGS_PWM_H */
+#endif /* __ASM_MACH_LOONGSON32_REGS_PWM_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-wdt.h b/arch/mips/include/asm/mach-loongson32/regs-wdt.h
index c39ee98..6644ab6 100644
--- a/arch/mips/include/asm/mach-loongson1/regs-wdt.h
+++ b/arch/mips/include/asm/mach-loongson32/regs-wdt.h
@@ -9,11 +9,11 @@
* option) any later version.
*/
-#ifndef __ASM_MACH_LOONGSON1_REGS_WDT_H
-#define __ASM_MACH_LOONGSON1_REGS_WDT_H
+#ifndef __ASM_MACH_LOONGSON32_REGS_WDT_H
+#define __ASM_MACH_LOONGSON32_REGS_WDT_H
#define WDT_EN 0x0
#define WDT_TIMER 0x4
#define WDT_SET 0x8
-#endif /* __ASM_MACH_LOONGSON1_REGS_WDT_H */
+#endif /* __ASM_MACH_LOONGSON32_REGS_WDT_H */
diff --git a/arch/mips/include/asm/mach-loongson/boot_param.h b/arch/mips/include/asm/mach-loongson64/boot_param.h
index fa80292..d3f3258 100644
--- a/arch/mips/include/asm/mach-loongson/boot_param.h
+++ b/arch/mips/include/asm/mach-loongson64/boot_param.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_MACH_LOONGSON_BOOT_PARAM_H_
-#define __ASM_MACH_LOONGSON_BOOT_PARAM_H_
+#ifndef __ASM_MACH_LOONGSON64_BOOT_PARAM_H_
+#define __ASM_MACH_LOONGSON64_BOOT_PARAM_H_
#define SYSTEM_RAM_LOW 1
#define SYSTEM_RAM_HIGH 2
diff --git a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h
index acc3768..98963c2 100644
--- a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h
@@ -13,8 +13,8 @@
* loongson2f user manual.
*/
-#ifndef __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H
+#ifndef __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
@@ -58,4 +58,4 @@
#define cpu_has_wsbh IS_ENABLED(CONFIG_CPU_LOONGSON3)
-#endif /* __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H */
+#endif /* __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h b/arch/mips/include/asm/mach-loongson64/cs5536/cs5536.h
index a0ee0cb..a0ee0cb 100644
--- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536.h
+++ b/arch/mips/include/asm/mach-loongson64/cs5536/cs5536.h
diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h b/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_mfgpt.h
index 021d017..021d017 100644
--- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h
+++ b/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_mfgpt.h
diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h b/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_pci.h
index 8a7ecb4..8a7ecb4 100644
--- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h
+++ b/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_pci.h
diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h b/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_vsm.h
index 1f17c18..1f17c18 100644
--- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h
+++ b/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_vsm.h
diff --git a/arch/mips/include/asm/mach-loongson/dma-coherence.h b/arch/mips/include/asm/mach-loongson64/dma-coherence.h
index 4bf4e19..1602a9e 100644
--- a/arch/mips/include/asm/mach-loongson/dma-coherence.h
+++ b/arch/mips/include/asm/mach-loongson64/dma-coherence.h
@@ -8,8 +8,8 @@
* Author: Fuxin Zhang, zhangfx@lemote.com
*
*/
-#ifndef __ASM_MACH_LOONGSON_DMA_COHERENCE_H
-#define __ASM_MACH_LOONGSON_DMA_COHERENCE_H
+#ifndef __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
+#define __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
#ifdef CONFIG_SWIOTLB
#include <linux/swiotlb.h>
@@ -82,4 +82,4 @@ static inline void plat_post_dma_flush(struct device *dev)
{
}
-#endif /* __ASM_MACH_LOONGSON_DMA_COHERENCE_H */
+#endif /* __ASM_MACH_LOONGSON64_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-loongson/gpio.h b/arch/mips/include/asm/mach-loongson64/gpio.h
index b3b2169..b3b2169 100644
--- a/arch/mips/include/asm/mach-loongson/gpio.h
+++ b/arch/mips/include/asm/mach-loongson64/gpio.h
diff --git a/arch/mips/include/asm/mach-loongson/irq.h b/arch/mips/include/asm/mach-loongson64/irq.h
index a281cca..d18c45c 100644
--- a/arch/mips/include/asm/mach-loongson/irq.h
+++ b/arch/mips/include/asm/mach-loongson64/irq.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_MACH_LOONGSON_IRQ_H_
-#define __ASM_MACH_LOONGSON_IRQ_H_
+#ifndef __ASM_MACH_LOONGSON64_IRQ_H_
+#define __ASM_MACH_LOONGSON64_IRQ_H_
#include <boot_param.h>
@@ -40,4 +40,4 @@ extern void fixup_irqs(void);
extern void loongson3_ipi_interrupt(struct pt_regs *regs);
#include_next <irq.h>
-#endif /* __ASM_MACH_LOONGSON_IRQ_H_ */
+#endif /* __ASM_MACH_LOONGSON64_IRQ_H_ */
diff --git a/arch/mips/include/asm/mach-loongson/kernel-entry-init.h b/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h
index df5fca8..3f2f84f 100644
--- a/arch/mips/include/asm/mach-loongson/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h
@@ -8,8 +8,8 @@
* Copyright (C) 2009 Jiajie Chen (chenjiajie@cse.buaa.edu.cn)
* Copyright (C) 2012 Huacai Chen (chenhc@lemote.com)
*/
-#ifndef __ASM_MACH_LOONGSON_KERNEL_ENTRY_H
-#define __ASM_MACH_LOONGSON_KERNEL_ENTRY_H
+#ifndef __ASM_MACH_LOONGSON64_KERNEL_ENTRY_H
+#define __ASM_MACH_LOONGSON64_KERNEL_ENTRY_H
/*
* Override macros used in arch/mips/kernel/head.S.
@@ -49,4 +49,4 @@
#endif
.endm
-#endif /* __ASM_MACH_LOONGSON_KERNEL_ENTRY_H */
+#endif /* __ASM_MACH_LOONGSON64_KERNEL_ENTRY_H */
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson64/loongson.h
index 9783103..d1ff774 100644
--- a/arch/mips/include/asm/mach-loongson/loongson.h
+++ b/arch/mips/include/asm/mach-loongson64/loongson.h
@@ -8,8 +8,8 @@
* option) any later version.
*/
-#ifndef __ASM_MACH_LOONGSON_LOONGSON_H
-#define __ASM_MACH_LOONGSON_LOONGSON_H
+#ifndef __ASM_MACH_LOONGSON64_LOONGSON_H
+#define __ASM_MACH_LOONGSON64_LOONGSON_H
#include <linux/io.h>
#include <linux/init.h>
@@ -357,4 +357,4 @@ extern unsigned long _loongson_addrwincfg_base;
#endif /* ! CONFIG_CPU_SUPPORTS_ADDRWINCFG */
-#endif /* __ASM_MACH_LOONGSON_LOONGSON_H */
+#endif /* __ASM_MACH_LOONGSON64_LOONGSON_H */
diff --git a/arch/mips/include/asm/mach-loongson/loongson_hwmon.h b/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h
index 4431fc5..4431fc5 100644
--- a/arch/mips/include/asm/mach-loongson/loongson_hwmon.h
+++ b/arch/mips/include/asm/mach-loongson64/loongson_hwmon.h
diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson64/machine.h
index cb2b602..c52549b 100644
--- a/arch/mips/include/asm/mach-loongson/machine.h
+++ b/arch/mips/include/asm/mach-loongson64/machine.h
@@ -8,8 +8,8 @@
* option) any later version.
*/
-#ifndef __ASM_MACH_LOONGSON_MACHINE_H
-#define __ASM_MACH_LOONGSON_MACHINE_H
+#ifndef __ASM_MACH_LOONGSON64_MACHINE_H
+#define __ASM_MACH_LOONGSON64_MACHINE_H
#ifdef CONFIG_LEMOTE_FULOONG2E
@@ -30,4 +30,4 @@
#endif /* CONFIG_LOONGSON_MACH3X */
-#endif /* __ASM_MACH_LOONGSON_MACHINE_H */
+#endif /* __ASM_MACH_LOONGSON64_MACHINE_H */
diff --git a/arch/mips/include/asm/mach-loongson/mc146818rtc.h b/arch/mips/include/asm/mach-loongson64/mc146818rtc.h
index ed7fe97..ebdccfe 100644
--- a/arch/mips/include/asm/mach-loongson/mc146818rtc.h
+++ b/arch/mips/include/asm/mach-loongson64/mc146818rtc.h
@@ -7,8 +7,8 @@
*
* RTC routines for PC style attached Dallas chip.
*/
-#ifndef __ASM_MACH_LOONGSON_MC146818RTC_H
-#define __ASM_MACH_LOONGSON_MC146818RTC_H
+#ifndef __ASM_MACH_LOONGSON64_MC146818RTC_H
+#define __ASM_MACH_LOONGSON64_MC146818RTC_H
#include <linux/io.h>
@@ -33,4 +33,4 @@ static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
#endif
-#endif /* __ASM_MACH_LOONGSON_MC146818RTC_H */
+#endif /* __ASM_MACH_LOONGSON64_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-loongson/mem.h b/arch/mips/include/asm/mach-loongson64/mem.h
index f4a36d7..75c16be 100644
--- a/arch/mips/include/asm/mach-loongson/mem.h
+++ b/arch/mips/include/asm/mach-loongson64/mem.h
@@ -8,8 +8,8 @@
* option) any later version.
*/
-#ifndef __ASM_MACH_LOONGSON_MEM_H
-#define __ASM_MACH_LOONGSON_MEM_H
+#ifndef __ASM_MACH_LOONGSON64_MEM_H
+#define __ASM_MACH_LOONGSON64_MEM_H
/*
* high memory space
@@ -38,4 +38,4 @@
#define LOONGSON_MMIO_MEM_END 0x80000000
#endif
-#endif /* __ASM_MACH_LOONGSON_MEM_H */
+#endif /* __ASM_MACH_LOONGSON64_MEM_H */
diff --git a/arch/mips/include/asm/mach-loongson/mmzone.h b/arch/mips/include/asm/mach-loongson64/mmzone.h
index 37c08a2..37c08a2 100644
--- a/arch/mips/include/asm/mach-loongson/mmzone.h
+++ b/arch/mips/include/asm/mach-loongson64/mmzone.h
diff --git a/arch/mips/include/asm/mach-loongson/pci.h b/arch/mips/include/asm/mach-loongson64/pci.h
index 1212774..3401f55 100644
--- a/arch/mips/include/asm/mach-loongson/pci.h
+++ b/arch/mips/include/asm/mach-loongson64/pci.h
@@ -9,8 +9,8 @@
* option) any later version.
*/
-#ifndef __ASM_MACH_LOONGSON_PCI_H_
-#define __ASM_MACH_LOONGSON_PCI_H_
+#ifndef __ASM_MACH_LOONGSON64_PCI_H_
+#define __ASM_MACH_LOONGSON64_PCI_H_
extern struct pci_ops loongson_pci_ops;
@@ -52,4 +52,4 @@ extern struct pci_ops loongson_pci_ops;
#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */
-#endif /* !__ASM_MACH_LOONGSON_PCI_H_ */
+#endif /* !__ASM_MACH_LOONGSON64_PCI_H_ */
diff --git a/arch/mips/include/asm/mach-loongson/spaces.h b/arch/mips/include/asm/mach-loongson64/spaces.h
index e2506ee..c6040b9 100644
--- a/arch/mips/include/asm/mach-loongson/spaces.h
+++ b/arch/mips/include/asm/mach-loongson64/spaces.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_MACH_LOONGSON_SPACES_H_
-#define __ASM_MACH_LOONGSON_SPACES_H_
+#ifndef __ASM_MACH_LOONGSON64_SPACES_H_
+#define __ASM_MACH_LOONGSON64_SPACES_H_
#if defined(CONFIG_64BIT)
#define CAC_BASE _AC(0x9800000000000000, UL)
diff --git a/arch/mips/include/asm/mach-loongson/topology.h b/arch/mips/include/asm/mach-loongson64/topology.h
index 0d8f3b5..0d8f3b5 100644
--- a/arch/mips/include/asm/mach-loongson/topology.h
+++ b/arch/mips/include/asm/mach-loongson64/topology.h
diff --git a/arch/mips/include/asm/mach-loongson64/workarounds.h b/arch/mips/include/asm/mach-loongson64/workarounds.h
new file mode 100644
index 0000000..e659f04
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson64/workarounds.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_LOONGSON64_WORKAROUNDS_H_
+#define __ASM_MACH_LOONGSON64_WORKAROUNDS_H_
+
+#define WORKAROUND_CPUFREQ 0x00000001
+#define WORKAROUND_CPUHOTPLUG 0x00000002
+
+#endif
diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
index 59c0901..edc7ee9 100644
--- a/arch/mips/include/asm/mips-cm.h
+++ b/arch/mips/include/asm/mips-cm.h
@@ -11,6 +11,7 @@
#ifndef __MIPS_ASM_MIPS_CM_H__
#define __MIPS_ASM_MIPS_CM_H__
+#include <linux/errno.h>
#include <linux/io.h>
#include <linux/types.h>
@@ -216,6 +217,10 @@ BUILD_CM_Cx_R_(tcid_8_priority, 0x80)
#define CM_GCR_CPC_BASE_CPCEN_SHF 0
#define CM_GCR_CPC_BASE_CPCEN_MSK (_ULCAST_(0x1) << 0)
+/* GCR_GIC_STATUS register fields */
+#define CM_GCR_GIC_STATUS_GICEX_SHF 0
+#define CM_GCR_GIC_STATUS_GICEX_MSK (_ULCAST_(0x1) << 0)
+
/* GCR_REGn_BASE register fields */
#define CM_GCR_REGn_BASE_BASEADDR_SHF 16
#define CM_GCR_REGn_BASE_BASEADDR_MSK (_ULCAST_(0xffff) << 16)
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 764e275..c5b0956 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -589,6 +589,28 @@
/* EntryHI bit definition */
#define MIPS_ENTRYHI_EHINV (_ULCAST_(1) << 10)
+/* R3000 EntryLo bit definitions */
+#define R3K_ENTRYLO_G (_ULCAST_(1) << 8)
+#define R3K_ENTRYLO_V (_ULCAST_(1) << 9)
+#define R3K_ENTRYLO_D (_ULCAST_(1) << 10)
+#define R3K_ENTRYLO_N (_ULCAST_(1) << 11)
+
+/* R4000 compatible EntryLo bit definitions */
+#define MIPS_ENTRYLO_G (_ULCAST_(1) << 0)
+#define MIPS_ENTRYLO_V (_ULCAST_(1) << 1)
+#define MIPS_ENTRYLO_D (_ULCAST_(1) << 2)
+#define MIPS_ENTRYLO_C_SHIFT 3
+#define MIPS_ENTRYLO_C (_ULCAST_(7) << MIPS_ENTRYLO_C_SHIFT)
+#ifdef CONFIG_64BIT
+/* as read by dmfc0 */
+#define MIPS_ENTRYLO_XI (_ULCAST_(1) << 62)
+#define MIPS_ENTRYLO_RI (_ULCAST_(1) << 63)
+#else
+/* as read by mfc0 */
+#define MIPS_ENTRYLO_XI (_ULCAST_(1) << 30)
+#define MIPS_ENTRYLO_RI (_ULCAST_(1) << 31)
+#endif
+
/* CMGCRBase bit definitions */
#define MIPS_CMGCRB_BASE 11
#define MIPS_CMGCRF_BASE (~_ULCAST_((1 << MIPS_CMGCRB_BASE) - 1))
@@ -685,6 +707,15 @@
#define TX39_CONF_DRSIZE_SHIFT 0
#define TX39_CONF_DRSIZE_MASK 0x00000003
+/*
+ * Interesting Bits in the R10K CP0 Branch Diagnostic Register
+ */
+/* Disable Branch Target Address Cache */
+#define R10K_DIAG_D_BTAC (_ULCAST_(1) << 27)
+/* Enable Branch Prediction Global History */
+#define R10K_DIAG_E_GHIST (_ULCAST_(1) << 26)
+/* Disable Branch Return Cache */
+#define R10K_DIAG_D_BRC (_ULCAST_(1) << 22)
/*
* Coprocessor 1 (FPU) register names
@@ -1247,6 +1278,10 @@ do { \
#define read_c0_diag() __read_32bit_c0_register($22, 0)
#define write_c0_diag(val) __write_32bit_c0_register($22, 0, val)
+/* R10K CP0 Branch Diagnostic register is 64bits wide */
+#define read_c0_r10k_diag() __read_64bit_c0_register($22, 0)
+#define write_c0_r10k_diag(val) __write_64bit_c0_register($22, 0, val)
+
#define read_c0_diag1() __read_32bit_c0_register($22, 1)
#define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val)
diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h
index 7d56686..832e216 100644
--- a/arch/mips/include/asm/pgtable-32.h
+++ b/arch/mips/include/asm/pgtable-32.h
@@ -18,7 +18,7 @@
#include <asm-generic/pgtable-nopmd.h>
-extern int temp_tlb_entry __cpuinitdata;
+extern int temp_tlb_entry;
/*
* - add_temporary_entry() add a temporary TLB entry. We use TLB entries
diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
index 8ebc2aa..0b4b668 100644
--- a/arch/mips/include/asm/prom.h
+++ b/arch/mips/include/asm/prom.h
@@ -11,7 +11,7 @@
#ifndef __ASM_PROM_H
#define __ASM_PROM_H
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
#include <linux/bug.h>
#include <linux/io.h>
#include <linux/types.h>
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index 1fca2e0..9de4ba4 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -109,7 +109,7 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
" subu %[ticket], %[my_ticket], %[ticket] \n"
"2: \n"
" .subsection 2 \n"
- "4: andi %[ticket], %[ticket], 0x1fff \n"
+ "4: andi %[ticket], %[ticket], 0xffff \n"
" sll %[ticket], 5 \n"
" \n"
"6: bnez %[ticket], 6b \n"
@@ -317,7 +317,7 @@ static inline void arch_write_lock(arch_rwlock_t *rw)
static inline void arch_write_unlock(arch_rwlock_t *rw)
{
- smp_mb();
+ smp_mb__before_llsc();
__asm__ __volatile__(
" # arch_write_unlock \n"
diff --git a/arch/mips/include/asm/txx9irq.h b/arch/mips/include/asm/txx9irq.h
index 5620879..68a6650 100644
--- a/arch/mips/include/asm/txx9irq.h
+++ b/arch/mips/include/asm/txx9irq.h
@@ -11,7 +11,7 @@
#include <irq.h>
-#ifdef CONFIG_IRQ_CPU
+#ifdef CONFIG_IRQ_MIPS_CPU
#define TXX9_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
#else
#ifdef CONFIG_I8259
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 9722357..5305d69 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -78,6 +78,21 @@ extern u64 __ua_limit;
#define segment_eq(a, b) ((a).seg == (b).seg)
+/*
+ * eva_kernel_access() - determine whether kernel memory access on an EVA system
+ *
+ * Determines whether memory accesses should be performed to kernel memory
+ * on a system using Extended Virtual Addressing (EVA).
+ *
+ * Return: true if a kernel memory access on an EVA system, else false.
+ */
+static inline bool eva_kernel_access(void)
+{
+ if (!config_enabled(CONFIG_EVA))
+ return false;
+
+ return segment_eq(get_fs(), get_ds());
+}
/*
* Is a address valid? This does a straighforward calculation rather
@@ -286,7 +301,7 @@ do { \
({ \
int __gu_err; \
\
- if (segment_eq(get_fs(), get_ds())) { \
+ if (eva_kernel_access()) { \
__get_kernel_common((x), size, ptr); \
} else { \
__chk_user_ptr(ptr); \
@@ -302,7 +317,7 @@ do { \
\
might_fault(); \
if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) { \
- if (segment_eq(get_fs(), get_ds())) \
+ if (eva_kernel_access()) \
__get_kernel_common((x), size, __gu_ptr); \
else \
__get_user_common((x), size, __gu_ptr); \
@@ -427,7 +442,7 @@ do { \
int __pu_err = 0; \
\
__pu_val = (x); \
- if (segment_eq(get_fs(), get_ds())) { \
+ if (eva_kernel_access()) { \
__put_kernel_common(ptr, size); \
} else { \
__chk_user_ptr(ptr); \
@@ -444,7 +459,7 @@ do { \
\
might_fault(); \
if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \
- if (segment_eq(get_fs(), get_ds())) \
+ if (eva_kernel_access()) \
__put_kernel_common(__pu_addr, size); \
else \
__put_user_common(__pu_addr, size); \
@@ -843,7 +858,7 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n);
__cu_from = (from); \
__cu_len = (n); \
might_fault(); \
- if (segment_eq(get_fs(), get_ds())) \
+ if (eva_kernel_access()) \
__cu_len = __invoke_copy_to_kernel(__cu_to, __cu_from, \
__cu_len); \
else \
@@ -863,7 +878,7 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
- if (segment_eq(get_fs(), get_ds())) \
+ if (eva_kernel_access()) \
__cu_len = __invoke_copy_to_kernel(__cu_to, __cu_from, \
__cu_len); \
else \
@@ -881,7 +896,7 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
- if (segment_eq(get_fs(), get_ds())) \
+ if (eva_kernel_access()) \
__cu_len = __invoke_copy_from_kernel_inatomic(__cu_to, \
__cu_from,\
__cu_len);\
@@ -915,7 +930,7 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
- if (segment_eq(get_fs(), get_ds())) { \
+ if (eva_kernel_access()) { \
__cu_len = __invoke_copy_to_kernel(__cu_to, \
__cu_from, \
__cu_len); \
@@ -1139,7 +1154,7 @@ extern size_t __copy_in_user_eva(void *__to, const void *__from, size_t __n);
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
- if (segment_eq(get_fs(), get_ds())) { \
+ if (eva_kernel_access()) { \
__cu_len = __invoke_copy_from_kernel(__cu_to, \
__cu_from, \
__cu_len); \
@@ -1163,7 +1178,7 @@ extern size_t __copy_in_user_eva(void *__to, const void *__from, size_t __n);
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
- if (segment_eq(get_fs(), get_ds())) { \
+ if (eva_kernel_access()) { \
__cu_len = ___invoke_copy_in_kernel(__cu_to, __cu_from, \
__cu_len); \
} else { \
@@ -1183,7 +1198,7 @@ extern size_t __copy_in_user_eva(void *__to, const void *__from, size_t __n);
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
- if (segment_eq(get_fs(), get_ds())) { \
+ if (eva_kernel_access()) { \
__cu_len = ___invoke_copy_in_kernel(__cu_to,__cu_from, \
__cu_len); \
} else { \
@@ -1263,7 +1278,7 @@ __strncpy_from_user(char *__to, const char __user *__from, long __len)
{
long res;
- if (segment_eq(get_fs(), get_ds())) {
+ if (eva_kernel_access()) {
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, %2\n\t"
@@ -1312,7 +1327,7 @@ strncpy_from_user(char *__to, const char __user *__from, long __len)
{
long res;
- if (segment_eq(get_fs(), get_ds())) {
+ if (eva_kernel_access()) {
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, %2\n\t"
@@ -1357,7 +1372,7 @@ static inline long strlen_user(const char __user *s)
{
long res;
- if (segment_eq(get_fs(), get_ds())) {
+ if (eva_kernel_access()) {
__asm__ __volatile__(
"move\t$4, %1\n\t"
__MODULE_JAL(__strlen_kernel_asm)
@@ -1384,7 +1399,7 @@ static inline long __strnlen_user(const char __user *s, long n)
{
long res;
- if (segment_eq(get_fs(), get_ds())) {
+ if (eva_kernel_access()) {
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, %2\n\t"
@@ -1426,7 +1441,7 @@ static inline long strnlen_user(const char __user *s, long n)
long res;
might_fault();
- if (segment_eq(get_fs(), get_ds())) {
+ if (eva_kernel_access()) {
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, %2\n\t"
diff --git a/arch/mips/include/asm/xtalk/xwidget.h b/arch/mips/include/asm/xtalk/xwidget.h
index 32e4e88..24f121d 100644
--- a/arch/mips/include/asm/xtalk/xwidget.h
+++ b/arch/mips/include/asm/xtalk/xwidget.h
@@ -84,6 +84,118 @@
#define WIDGET_LLP_MAXBURST 0x000003ff
#define WIDGET_LLP_MAXBURST_SHFT 0
+/* Xtalk Widget Device Mfgr Nums */
+#define WIDGET_XBOW_MFGR_NUM 0x0 /* IP30 XBow Chip */
+#define WIDGET_XXBOW_MFGR_NUM 0x0 /* IP35 Xbow + XBridge Chip */
+#define WIDGET_ODYS_MFGR_NUM 0x023 /* Odyssey / VPro GFX */
+#define WIDGET_TPU_MFGR_NUM 0x024 /* Tensor Processor Unit */
+#define WIDGET_XBRDG_MFGR_NUM 0x024 /* IP35 XBridge Chip */
+#define WIDGET_HEART_MFGR_NUM 0x036 /* IP30 HEART Chip */
+#define WIDGET_BRIDG_MFGR_NUM 0x036 /* PCI Bridge */
+#define WIDGET_HUB_MFGR_NUM 0x036 /* IP27 Hub Chip */
+#define WIDGET_BDRCK_MFGR_NUM 0x036 /* IP35 Bedrock Chip */
+#define WIDGET_IMPCT_MFGR_NUM 0x2aa /* HQ4 / Impact GFX */
+#define WIDGET_KONA_MFGR_NUM 0x2aa /* InfiniteReality3 / Kona GFX */
+#define WIDGET_NULL_MFGR_NUM -1 /* NULL */
+
+/* Xtalk Widget Device Part Nums */
+#define WIDGET_XBOW_PART_NUM 0x0000
+#define WIDGET_HEART_PART_NUM 0xc001
+#define WIDGET_BRIDG_PART_NUM 0xc002
+#define WIDGET_IMPCT_PART_NUM 0xc003
+#define WIDGET_ODYS_PART_NUM 0xc013
+#define WIDGET_HUB_PART_NUM 0xc101
+#define WIDGET_KONA_PART_NUM 0xc102
+#define WIDGET_BDRCK_PART_NUM 0xc110
+#define WIDGET_TPU_PART_NUM 0xc202
+#define WIDGET_XXBOW_PART_NUM 0xd000
+#define WIDGET_XBRDG_PART_NUM 0xd002
+#define WIDGET_NULL_PART_NUM -1
+
+/* For Xtalk Widget identification */
+struct widget_ident {
+ u32 mfgr;
+ u32 part;
+ char *name;
+ char *revs[16];
+};
+
+/* Known Xtalk Widgets */
+static const struct widget_ident __initconst widget_idents[] = {
+ {
+ WIDGET_XBOW_MFGR_NUM,
+ WIDGET_XBOW_PART_NUM,
+ "xbow",
+ {NULL, "1.0", "1.1", "1.2", "1.3", "2.0", NULL},
+ },
+ {
+ WIDGET_HEART_MFGR_NUM,
+ WIDGET_HEART_PART_NUM,
+ "heart",
+ {NULL, "A", "B", "C", "D", "E", "F", NULL},
+ },
+ {
+ WIDGET_BRIDG_MFGR_NUM,
+ WIDGET_BRIDG_PART_NUM,
+ "bridge",
+ {NULL, "A", "B", "C", "D", NULL},
+ },
+ {
+ WIDGET_IMPCT_MFGR_NUM,
+ WIDGET_IMPCT_PART_NUM,
+ "impact",
+ {NULL, "A", "B", NULL},
+ },
+ {
+ WIDGET_ODYS_MFGR_NUM,
+ WIDGET_ODYS_PART_NUM,
+ "odyssey",
+ {NULL, "A", "B", NULL},
+ },
+ {
+ WIDGET_HUB_MFGR_NUM,
+ WIDGET_HUB_PART_NUM,
+ "hub",
+ {NULL, "1.0", "2.0", "2.1", "2.2", "2.3", "2.4", NULL},
+ },
+ {
+ WIDGET_KONA_MFGR_NUM,
+ WIDGET_KONA_PART_NUM,
+ "kona",
+ {NULL},
+ },
+ {
+ WIDGET_BDRCK_MFGR_NUM,
+ WIDGET_BDRCK_PART_NUM,
+ "bedrock",
+ {NULL, "1.0", "1.1", NULL},
+ },
+ {
+ WIDGET_TPU_MFGR_NUM,
+ WIDGET_TPU_PART_NUM,
+ "tpu",
+ {"0", NULL},
+ },
+ {
+ WIDGET_XXBOW_MFGR_NUM,
+ WIDGET_XXBOW_PART_NUM,
+ "xxbow",
+ {NULL, "1.0", "2.0", NULL},
+ },
+ {
+ WIDGET_XBRDG_MFGR_NUM,
+ WIDGET_XBRDG_PART_NUM,
+ "xbridge",
+ {NULL, "A", "B", NULL},
+ },
+ {
+ WIDGET_NULL_MFGR_NUM,
+ WIDGET_NULL_PART_NUM,
+ NULL,
+ {NULL},
+ }
+};
+
/*
* according to the crosstalk spec, only 32-bits access to the widget
* configuration registers is allowed. some widgets may allow 64-bits
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 4689030..36f8201 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -1,9 +1,24 @@
choice
prompt "Machine type"
- depends on MACH_JZ4740
+ depends on MACH_INGENIC
default JZ4740_QI_LB60
config JZ4740_QI_LB60
bool "Qi Hardware Ben NanoNote"
+ select MACH_JZ4740
+
+config JZ4780_CI20
+ bool "MIPS Creator CI20"
+ select MACH_JZ4780
endchoice
+
+config MACH_JZ4740
+ bool
+ select SYS_HAS_CPU_MIPS32_R1
+
+config MACH_JZ4780
+ bool
+ select MIPS_CPU_SCACHE
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_HIGHMEM
diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
index 28e5535..39d70bd 100644
--- a/arch/mips/jz4740/Makefile
+++ b/arch/mips/jz4740/Makefile
@@ -4,10 +4,12 @@
# Object file lists.
-obj-y += prom.o irq.o time.o reset.o setup.o \
- gpio.o clock.o platform.o timer.o serial.o
+obj-y += prom.o time.o reset.o setup.o \
+ platform.o timer.o
-obj-$(CONFIG_DEBUG_FS) += clock-debugfs.o
+obj-$(CONFIG_MACH_JZ4740) += gpio.o
+
+CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
# board specific support
diff --git a/arch/mips/jz4740/Platform b/arch/mips/jz4740/Platform
index c41d300..28448d35 100644
--- a/arch/mips/jz4740/Platform
+++ b/arch/mips/jz4740/Platform
@@ -1,4 +1,4 @@
-platform-$(CONFIG_MACH_JZ4740) += jz4740/
-cflags-$(CONFIG_MACH_JZ4740) += -I$(srctree)/arch/mips/include/asm/mach-jz4740
-load-$(CONFIG_MACH_JZ4740) += 0xffffffff80010000
-zload-$(CONFIG_MACH_JZ4740) += 0xffffffff80600000
+platform-$(CONFIG_MACH_INGENIC) += jz4740/
+cflags-$(CONFIG_MACH_INGENIC) += -I$(srctree)/arch/mips/include/asm/mach-jz4740
+load-$(CONFIG_MACH_INGENIC) += 0xffffffff80010000
+zload-$(CONFIG_MACH_INGENIC) += 0xffffffff80600000
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 9dd051e..4e62bf8 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -482,8 +482,6 @@ static int __init qi_lb60_init_platform_devices(void)
gpiod_add_lookup_table(&qi_lb60_audio_gpio_table);
gpiod_add_lookup_table(&qi_lb60_nand_gpio_table);
- jz4740_serial_device_register();
-
spi_register_board_info(qi_lb60_spi_board_info,
ARRAY_SIZE(qi_lb60_spi_board_info));
@@ -497,11 +495,6 @@ static int __init qi_lb60_init_platform_devices(void)
}
-struct jz4740_clock_board_data jz4740_clock_bdata = {
- .ext_rate = 12000000,
- .rtc_rate = 32768,
-};
-
static __init int board_avt2(char *str)
{
qi_lb60_mmc_pdata.card_detect_active_low = 1;
diff --git a/arch/mips/jz4740/clock-debugfs.c b/arch/mips/jz4740/clock-debugfs.c
deleted file mode 100644
index 325422d0..0000000
--- a/arch/mips/jz4740/clock-debugfs.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- * JZ4740 SoC clock support debugfs entries
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <linux/debugfs.h>
-#include <linux/uaccess.h>
-
-#include <asm/mach-jz4740/clock.h>
-#include "clock.h"
-
-static struct dentry *jz4740_clock_debugfs;
-
-static int jz4740_clock_debugfs_show_enabled(void *data, uint64_t *value)
-{
- struct clk *clk = data;
- *value = clk_is_enabled(clk);
-
- return 0;
-}
-
-static int jz4740_clock_debugfs_set_enabled(void *data, uint64_t value)
-{
- struct clk *clk = data;
-
- if (value)
- return clk_enable(clk);
- else
- clk_disable(clk);
-
- return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(jz4740_clock_debugfs_ops_enabled,
- jz4740_clock_debugfs_show_enabled,
- jz4740_clock_debugfs_set_enabled,
- "%llu\n");
-
-static int jz4740_clock_debugfs_show_rate(void *data, uint64_t *value)
-{
- struct clk *clk = data;
- *value = clk_get_rate(clk);
-
- return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(jz4740_clock_debugfs_ops_rate,
- jz4740_clock_debugfs_show_rate,
- NULL,
- "%llu\n");
-
-void jz4740_clock_debugfs_add_clk(struct clk *clk)
-{
- if (!jz4740_clock_debugfs)
- return;
-
- clk->debugfs_entry = debugfs_create_dir(clk->name, jz4740_clock_debugfs);
- debugfs_create_file("rate", S_IWUGO | S_IRUGO, clk->debugfs_entry, clk,
- &jz4740_clock_debugfs_ops_rate);
- debugfs_create_file("enabled", S_IRUGO, clk->debugfs_entry, clk,
- &jz4740_clock_debugfs_ops_enabled);
-
- if (clk->parent) {
- char parent_path[100];
- snprintf(parent_path, 100, "../%s", clk->parent->name);
- clk->debugfs_parent_entry = debugfs_create_symlink("parent",
- clk->debugfs_entry,
- parent_path);
- }
-}
-
-/* TODO: Locking */
-void jz4740_clock_debugfs_update_parent(struct clk *clk)
-{
- debugfs_remove(clk->debugfs_parent_entry);
-
- if (clk->parent) {
- char parent_path[100];
- snprintf(parent_path, 100, "../%s", clk->parent->name);
- clk->debugfs_parent_entry = debugfs_create_symlink("parent",
- clk->debugfs_entry,
- parent_path);
- } else {
- clk->debugfs_parent_entry = NULL;
- }
-}
-
-void jz4740_clock_debugfs_init(void)
-{
- jz4740_clock_debugfs = debugfs_create_dir("jz4740-clock", NULL);
- if (IS_ERR(jz4740_clock_debugfs))
- jz4740_clock_debugfs = NULL;
-}
diff --git a/arch/mips/jz4740/clock.c b/arch/mips/jz4740/clock.c
deleted file mode 100644
index 1b5f554..0000000
--- a/arch/mips/jz4740/clock.c
+++ /dev/null
@@ -1,924 +0,0 @@
-/*
- * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- * JZ4740 SoC clock support
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/err.h>
-
-#include <asm/mach-jz4740/clock.h>
-#include <asm/mach-jz4740/base.h>
-
-#include "clock.h"
-
-#define JZ_REG_CLOCK_CTRL 0x00
-#define JZ_REG_CLOCK_LOW_POWER 0x04
-#define JZ_REG_CLOCK_PLL 0x10
-#define JZ_REG_CLOCK_GATE 0x20
-#define JZ_REG_CLOCK_SLEEP_CTRL 0x24
-#define JZ_REG_CLOCK_I2S 0x60
-#define JZ_REG_CLOCK_LCD 0x64
-#define JZ_REG_CLOCK_MMC 0x68
-#define JZ_REG_CLOCK_UHC 0x6C
-#define JZ_REG_CLOCK_SPI 0x74
-
-#define JZ_CLOCK_CTRL_I2S_SRC_PLL BIT(31)
-#define JZ_CLOCK_CTRL_KO_ENABLE BIT(30)
-#define JZ_CLOCK_CTRL_UDC_SRC_PLL BIT(29)
-#define JZ_CLOCK_CTRL_UDIV_MASK 0x1f800000
-#define JZ_CLOCK_CTRL_CHANGE_ENABLE BIT(22)
-#define JZ_CLOCK_CTRL_PLL_HALF BIT(21)
-#define JZ_CLOCK_CTRL_LDIV_MASK 0x001f0000
-#define JZ_CLOCK_CTRL_UDIV_OFFSET 23
-#define JZ_CLOCK_CTRL_LDIV_OFFSET 16
-#define JZ_CLOCK_CTRL_MDIV_OFFSET 12
-#define JZ_CLOCK_CTRL_PDIV_OFFSET 8
-#define JZ_CLOCK_CTRL_HDIV_OFFSET 4
-#define JZ_CLOCK_CTRL_CDIV_OFFSET 0
-
-#define JZ_CLOCK_GATE_UART0 BIT(0)
-#define JZ_CLOCK_GATE_TCU BIT(1)
-#define JZ_CLOCK_GATE_RTC BIT(2)
-#define JZ_CLOCK_GATE_I2C BIT(3)
-#define JZ_CLOCK_GATE_SPI BIT(4)
-#define JZ_CLOCK_GATE_AIC BIT(5)
-#define JZ_CLOCK_GATE_I2S BIT(6)
-#define JZ_CLOCK_GATE_MMC BIT(7)
-#define JZ_CLOCK_GATE_ADC BIT(8)
-#define JZ_CLOCK_GATE_CIM BIT(9)
-#define JZ_CLOCK_GATE_LCD BIT(10)
-#define JZ_CLOCK_GATE_UDC BIT(11)
-#define JZ_CLOCK_GATE_DMAC BIT(12)
-#define JZ_CLOCK_GATE_IPU BIT(13)
-#define JZ_CLOCK_GATE_UHC BIT(14)
-#define JZ_CLOCK_GATE_UART1 BIT(15)
-
-#define JZ_CLOCK_I2S_DIV_MASK 0x01ff
-
-#define JZ_CLOCK_LCD_DIV_MASK 0x01ff
-
-#define JZ_CLOCK_MMC_DIV_MASK 0x001f
-
-#define JZ_CLOCK_UHC_DIV_MASK 0x000f
-
-#define JZ_CLOCK_SPI_SRC_PLL BIT(31)
-#define JZ_CLOCK_SPI_DIV_MASK 0x000f
-
-#define JZ_CLOCK_PLL_M_MASK 0x01ff
-#define JZ_CLOCK_PLL_N_MASK 0x001f
-#define JZ_CLOCK_PLL_OD_MASK 0x0003
-#define JZ_CLOCK_PLL_STABLE BIT(10)
-#define JZ_CLOCK_PLL_BYPASS BIT(9)
-#define JZ_CLOCK_PLL_ENABLED BIT(8)
-#define JZ_CLOCK_PLL_STABLIZE_MASK 0x000f
-#define JZ_CLOCK_PLL_M_OFFSET 23
-#define JZ_CLOCK_PLL_N_OFFSET 18
-#define JZ_CLOCK_PLL_OD_OFFSET 16
-
-#define JZ_CLOCK_LOW_POWER_MODE_DOZE BIT(2)
-#define JZ_CLOCK_LOW_POWER_MODE_SLEEP BIT(0)
-
-#define JZ_CLOCK_SLEEP_CTRL_SUSPEND_UHC BIT(7)
-#define JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC BIT(6)
-
-static void __iomem *jz_clock_base;
-static spinlock_t jz_clock_lock;
-static LIST_HEAD(jz_clocks);
-
-struct main_clk {
- struct clk clk;
- uint32_t div_offset;
-};
-
-struct divided_clk {
- struct clk clk;
- uint32_t reg;
- uint32_t mask;
-};
-
-struct static_clk {
- struct clk clk;
- unsigned long rate;
-};
-
-static uint32_t jz_clk_reg_read(int reg)
-{
- return readl(jz_clock_base + reg);
-}
-
-static void jz_clk_reg_write_mask(int reg, uint32_t val, uint32_t mask)
-{
- uint32_t val2;
-
- spin_lock(&jz_clock_lock);
- val2 = readl(jz_clock_base + reg);
- val2 &= ~mask;
- val2 |= val;
- writel(val2, jz_clock_base + reg);
- spin_unlock(&jz_clock_lock);
-}
-
-static void jz_clk_reg_set_bits(int reg, uint32_t mask)
-{
- uint32_t val;
-
- spin_lock(&jz_clock_lock);
- val = readl(jz_clock_base + reg);
- val |= mask;
- writel(val, jz_clock_base + reg);
- spin_unlock(&jz_clock_lock);
-}
-
-static void jz_clk_reg_clear_bits(int reg, uint32_t mask)
-{
- uint32_t val;
-
- spin_lock(&jz_clock_lock);
- val = readl(jz_clock_base + reg);
- val &= ~mask;
- writel(val, jz_clock_base + reg);
- spin_unlock(&jz_clock_lock);
-}
-
-static int jz_clk_enable_gating(struct clk *clk)
-{
- if (clk->gate_bit == JZ4740_CLK_NOT_GATED)
- return -EINVAL;
-
- jz_clk_reg_clear_bits(JZ_REG_CLOCK_GATE, clk->gate_bit);
- return 0;
-}
-
-static int jz_clk_disable_gating(struct clk *clk)
-{
- if (clk->gate_bit == JZ4740_CLK_NOT_GATED)
- return -EINVAL;
-
- jz_clk_reg_set_bits(JZ_REG_CLOCK_GATE, clk->gate_bit);
- return 0;
-}
-
-static int jz_clk_is_enabled_gating(struct clk *clk)
-{
- if (clk->gate_bit == JZ4740_CLK_NOT_GATED)
- return 1;
-
- return !(jz_clk_reg_read(JZ_REG_CLOCK_GATE) & clk->gate_bit);
-}
-
-static unsigned long jz_clk_static_get_rate(struct clk *clk)
-{
- return ((struct static_clk *)clk)->rate;
-}
-
-static int jz_clk_ko_enable(struct clk *clk)
-{
- jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_KO_ENABLE);
- return 0;
-}
-
-static int jz_clk_ko_disable(struct clk *clk)
-{
- jz_clk_reg_clear_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_KO_ENABLE);
- return 0;
-}
-
-static int jz_clk_ko_is_enabled(struct clk *clk)
-{
- return !!(jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_KO_ENABLE);
-}
-
-static const int pllno[] = {1, 2, 2, 4};
-
-static unsigned long jz_clk_pll_get_rate(struct clk *clk)
-{
- uint32_t val;
- int m;
- int n;
- int od;
-
- val = jz_clk_reg_read(JZ_REG_CLOCK_PLL);
-
- if (val & JZ_CLOCK_PLL_BYPASS)
- return clk_get_rate(clk->parent);
-
- m = ((val >> 23) & 0x1ff) + 2;
- n = ((val >> 18) & 0x1f) + 2;
- od = (val >> 16) & 0x3;
-
- return ((clk_get_rate(clk->parent) / n) * m) / pllno[od];
-}
-
-static unsigned long jz_clk_pll_half_get_rate(struct clk *clk)
-{
- uint32_t reg;
-
- reg = jz_clk_reg_read(JZ_REG_CLOCK_CTRL);
- if (reg & JZ_CLOCK_CTRL_PLL_HALF)
- return jz_clk_pll_get_rate(clk->parent);
- return jz_clk_pll_get_rate(clk->parent) >> 1;
-}
-
-static const int jz_clk_main_divs[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
-
-static unsigned long jz_clk_main_round_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = jz_clk_pll_get_rate(clk->parent);
- int div;
-
- div = parent_rate / rate;
- if (div > 32)
- return parent_rate / 32;
- else if (div < 1)
- return parent_rate;
-
- div &= (0x3 << (ffs(div) - 1));
-
- return parent_rate / div;
-}
-
-static unsigned long jz_clk_main_get_rate(struct clk *clk)
-{
- struct main_clk *mclk = (struct main_clk *)clk;
- uint32_t div;
-
- div = jz_clk_reg_read(JZ_REG_CLOCK_CTRL);
-
- div >>= mclk->div_offset;
- div &= 0xf;
-
- if (div >= ARRAY_SIZE(jz_clk_main_divs))
- div = ARRAY_SIZE(jz_clk_main_divs) - 1;
-
- return jz_clk_pll_get_rate(clk->parent) / jz_clk_main_divs[div];
-}
-
-static int jz_clk_main_set_rate(struct clk *clk, unsigned long rate)
-{
- struct main_clk *mclk = (struct main_clk *)clk;
- int i;
- int div;
- unsigned long parent_rate = jz_clk_pll_get_rate(clk->parent);
-
- rate = jz_clk_main_round_rate(clk, rate);
-
- div = parent_rate / rate;
-
- i = (ffs(div) - 1) << 1;
- if (i > 0 && !(div & BIT(i-1)))
- i -= 1;
-
- jz_clk_reg_write_mask(JZ_REG_CLOCK_CTRL, i << mclk->div_offset,
- 0xf << mclk->div_offset);
-
- return 0;
-}
-
-static struct clk_ops jz_clk_static_ops = {
- .get_rate = jz_clk_static_get_rate,
- .enable = jz_clk_enable_gating,
- .disable = jz_clk_disable_gating,
- .is_enabled = jz_clk_is_enabled_gating,
-};
-
-static struct static_clk jz_clk_ext = {
- .clk = {
- .name = "ext",
- .gate_bit = JZ4740_CLK_NOT_GATED,
- .ops = &jz_clk_static_ops,
- },
-};
-
-static struct clk_ops jz_clk_pll_ops = {
- .get_rate = jz_clk_pll_get_rate,
-};
-
-static struct clk jz_clk_pll = {
- .name = "pll",
- .parent = &jz_clk_ext.clk,
- .ops = &jz_clk_pll_ops,
-};
-
-static struct clk_ops jz_clk_pll_half_ops = {
- .get_rate = jz_clk_pll_half_get_rate,
-};
-
-static struct clk jz_clk_pll_half = {
- .name = "pll half",
- .parent = &jz_clk_pll,
- .ops = &jz_clk_pll_half_ops,
-};
-
-static const struct clk_ops jz_clk_main_ops = {
- .get_rate = jz_clk_main_get_rate,
- .set_rate = jz_clk_main_set_rate,
- .round_rate = jz_clk_main_round_rate,
-};
-
-static struct main_clk jz_clk_cpu = {
- .clk = {
- .name = "cclk",
- .parent = &jz_clk_pll,
- .ops = &jz_clk_main_ops,
- },
- .div_offset = JZ_CLOCK_CTRL_CDIV_OFFSET,
-};
-
-static struct main_clk jz_clk_memory = {
- .clk = {
- .name = "mclk",
- .parent = &jz_clk_pll,
- .ops = &jz_clk_main_ops,
- },
- .div_offset = JZ_CLOCK_CTRL_MDIV_OFFSET,
-};
-
-static struct main_clk jz_clk_high_speed_peripheral = {
- .clk = {
- .name = "hclk",
- .parent = &jz_clk_pll,
- .ops = &jz_clk_main_ops,
- },
- .div_offset = JZ_CLOCK_CTRL_HDIV_OFFSET,
-};
-
-
-static struct main_clk jz_clk_low_speed_peripheral = {
- .clk = {
- .name = "pclk",
- .parent = &jz_clk_pll,
- .ops = &jz_clk_main_ops,
- },
- .div_offset = JZ_CLOCK_CTRL_PDIV_OFFSET,
-};
-
-static const struct clk_ops jz_clk_ko_ops = {
- .enable = jz_clk_ko_enable,
- .disable = jz_clk_ko_disable,
- .is_enabled = jz_clk_ko_is_enabled,
-};
-
-static struct clk jz_clk_ko = {
- .name = "cko",
- .parent = &jz_clk_memory.clk,
- .ops = &jz_clk_ko_ops,
-};
-
-static int jz_clk_spi_set_parent(struct clk *clk, struct clk *parent)
-{
- if (parent == &jz_clk_pll)
- jz_clk_reg_set_bits(JZ_CLOCK_SPI_SRC_PLL, JZ_REG_CLOCK_SPI);
- else if (parent == &jz_clk_ext.clk)
- jz_clk_reg_clear_bits(JZ_CLOCK_SPI_SRC_PLL, JZ_REG_CLOCK_SPI);
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- return 0;
-}
-
-static int jz_clk_i2s_set_parent(struct clk *clk, struct clk *parent)
-{
- if (parent == &jz_clk_pll_half)
- jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_I2S_SRC_PLL);
- else if (parent == &jz_clk_ext.clk)
- jz_clk_reg_clear_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_I2S_SRC_PLL);
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- return 0;
-}
-
-static int jz_clk_udc_enable(struct clk *clk)
-{
- jz_clk_reg_set_bits(JZ_REG_CLOCK_SLEEP_CTRL,
- JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC);
-
- return 0;
-}
-
-static int jz_clk_udc_disable(struct clk *clk)
-{
- jz_clk_reg_clear_bits(JZ_REG_CLOCK_SLEEP_CTRL,
- JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC);
-
- return 0;
-}
-
-static int jz_clk_udc_is_enabled(struct clk *clk)
-{
- return !!(jz_clk_reg_read(JZ_REG_CLOCK_SLEEP_CTRL) &
- JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC);
-}
-
-static int jz_clk_udc_set_parent(struct clk *clk, struct clk *parent)
-{
- if (parent == &jz_clk_pll_half)
- jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_UDC_SRC_PLL);
- else if (parent == &jz_clk_ext.clk)
- jz_clk_reg_clear_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_UDC_SRC_PLL);
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- return 0;
-}
-
-static int jz_clk_udc_set_rate(struct clk *clk, unsigned long rate)
-{
- int div;
-
- if (clk->parent == &jz_clk_ext.clk)
- return -EINVAL;
-
- div = clk_get_rate(clk->parent) / rate - 1;
-
- if (div < 0)
- div = 0;
- else if (div > 63)
- div = 63;
-
- jz_clk_reg_write_mask(JZ_REG_CLOCK_CTRL, div << JZ_CLOCK_CTRL_UDIV_OFFSET,
- JZ_CLOCK_CTRL_UDIV_MASK);
- return 0;
-}
-
-static unsigned long jz_clk_udc_get_rate(struct clk *clk)
-{
- int div;
-
- if (clk->parent == &jz_clk_ext.clk)
- return clk_get_rate(clk->parent);
-
- div = (jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_UDIV_MASK);
- div >>= JZ_CLOCK_CTRL_UDIV_OFFSET;
- div += 1;
-
- return clk_get_rate(clk->parent) / div;
-}
-
-static unsigned long jz_clk_divided_get_rate(struct clk *clk)
-{
- struct divided_clk *dclk = (struct divided_clk *)clk;
- int div;
-
- if (clk->parent == &jz_clk_ext.clk)
- return clk_get_rate(clk->parent);
-
- div = (jz_clk_reg_read(dclk->reg) & dclk->mask) + 1;
-
- return clk_get_rate(clk->parent) / div;
-}
-
-static int jz_clk_divided_set_rate(struct clk *clk, unsigned long rate)
-{
- struct divided_clk *dclk = (struct divided_clk *)clk;
- int div;
-
- if (clk->parent == &jz_clk_ext.clk)
- return -EINVAL;
-
- div = clk_get_rate(clk->parent) / rate - 1;
-
- if (div < 0)
- div = 0;
- else if (div > dclk->mask)
- div = dclk->mask;
-
- jz_clk_reg_write_mask(dclk->reg, div, dclk->mask);
-
- return 0;
-}
-
-static unsigned long jz_clk_ldclk_round_rate(struct clk *clk, unsigned long rate)
-{
- int div;
- unsigned long parent_rate = jz_clk_pll_half_get_rate(clk->parent);
-
- if (rate > 150000000)
- return 150000000;
-
- div = parent_rate / rate;
- if (div < 1)
- div = 1;
- else if (div > 32)
- div = 32;
-
- return parent_rate / div;
-}
-
-static int jz_clk_ldclk_set_rate(struct clk *clk, unsigned long rate)
-{
- int div;
-
- if (rate > 150000000)
- return -EINVAL;
-
- div = jz_clk_pll_half_get_rate(clk->parent) / rate - 1;
- if (div < 0)
- div = 0;
- else if (div > 31)
- div = 31;
-
- jz_clk_reg_write_mask(JZ_REG_CLOCK_CTRL, div << JZ_CLOCK_CTRL_LDIV_OFFSET,
- JZ_CLOCK_CTRL_LDIV_MASK);
-
- return 0;
-}
-
-static unsigned long jz_clk_ldclk_get_rate(struct clk *clk)
-{
- int div;
-
- div = jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_LDIV_MASK;
- div >>= JZ_CLOCK_CTRL_LDIV_OFFSET;
-
- return jz_clk_pll_half_get_rate(clk->parent) / (div + 1);
-}
-
-static const struct clk_ops jz_clk_ops_ld = {
- .set_rate = jz_clk_ldclk_set_rate,
- .get_rate = jz_clk_ldclk_get_rate,
- .round_rate = jz_clk_ldclk_round_rate,
- .enable = jz_clk_enable_gating,
- .disable = jz_clk_disable_gating,
- .is_enabled = jz_clk_is_enabled_gating,
-};
-
-static struct clk jz_clk_ld = {
- .name = "lcd",
- .gate_bit = JZ_CLOCK_GATE_LCD,
- .parent = &jz_clk_pll_half,
- .ops = &jz_clk_ops_ld,
-};
-
-static const struct clk_ops jz_clk_i2s_ops = {
- .set_rate = jz_clk_divided_set_rate,
- .get_rate = jz_clk_divided_get_rate,
- .enable = jz_clk_enable_gating,
- .disable = jz_clk_disable_gating,
- .is_enabled = jz_clk_is_enabled_gating,
- .set_parent = jz_clk_i2s_set_parent,
-};
-
-static const struct clk_ops jz_clk_spi_ops = {
- .set_rate = jz_clk_divided_set_rate,
- .get_rate = jz_clk_divided_get_rate,
- .enable = jz_clk_enable_gating,
- .disable = jz_clk_disable_gating,
- .is_enabled = jz_clk_is_enabled_gating,
- .set_parent = jz_clk_spi_set_parent,
-};
-
-static const struct clk_ops jz_clk_divided_ops = {
- .set_rate = jz_clk_divided_set_rate,
- .get_rate = jz_clk_divided_get_rate,
- .enable = jz_clk_enable_gating,
- .disable = jz_clk_disable_gating,
- .is_enabled = jz_clk_is_enabled_gating,
-};
-
-static struct divided_clk jz4740_clock_divided_clks[] = {
- [0] = {
- .clk = {
- .name = "i2s",
- .parent = &jz_clk_ext.clk,
- .gate_bit = JZ_CLOCK_GATE_I2S,
- .ops = &jz_clk_i2s_ops,
- },
- .reg = JZ_REG_CLOCK_I2S,
- .mask = JZ_CLOCK_I2S_DIV_MASK,
- },
- [1] = {
- .clk = {
- .name = "spi",
- .parent = &jz_clk_ext.clk,
- .gate_bit = JZ_CLOCK_GATE_SPI,
- .ops = &jz_clk_spi_ops,
- },
- .reg = JZ_REG_CLOCK_SPI,
- .mask = JZ_CLOCK_SPI_DIV_MASK,
- },
- [2] = {
- .clk = {
- .name = "lcd_pclk",
- .parent = &jz_clk_pll_half,
- .gate_bit = JZ4740_CLK_NOT_GATED,
- .ops = &jz_clk_divided_ops,
- },
- .reg = JZ_REG_CLOCK_LCD,
- .mask = JZ_CLOCK_LCD_DIV_MASK,
- },
- [3] = {
- .clk = {
- .name = "mmc",
- .parent = &jz_clk_pll_half,
- .gate_bit = JZ_CLOCK_GATE_MMC,
- .ops = &jz_clk_divided_ops,
- },
- .reg = JZ_REG_CLOCK_MMC,
- .mask = JZ_CLOCK_MMC_DIV_MASK,
- },
- [4] = {
- .clk = {
- .name = "uhc",
- .parent = &jz_clk_pll_half,
- .gate_bit = JZ_CLOCK_GATE_UHC,
- .ops = &jz_clk_divided_ops,
- },
- .reg = JZ_REG_CLOCK_UHC,
- .mask = JZ_CLOCK_UHC_DIV_MASK,
- },
-};
-
-static const struct clk_ops jz_clk_udc_ops = {
- .set_parent = jz_clk_udc_set_parent,
- .set_rate = jz_clk_udc_set_rate,
- .get_rate = jz_clk_udc_get_rate,
- .enable = jz_clk_udc_enable,
- .disable = jz_clk_udc_disable,
- .is_enabled = jz_clk_udc_is_enabled,
-};
-
-static const struct clk_ops jz_clk_simple_ops = {
- .enable = jz_clk_enable_gating,
- .disable = jz_clk_disable_gating,
- .is_enabled = jz_clk_is_enabled_gating,
-};
-
-static struct clk jz4740_clock_simple_clks[] = {
- [0] = {
- .name = "udc",
- .parent = &jz_clk_ext.clk,
- .ops = &jz_clk_udc_ops,
- },
- [1] = {
- .name = "uart0",
- .parent = &jz_clk_ext.clk,
- .gate_bit = JZ_CLOCK_GATE_UART0,
- .ops = &jz_clk_simple_ops,
- },
- [2] = {
- .name = "uart1",
- .parent = &jz_clk_ext.clk,
- .gate_bit = JZ_CLOCK_GATE_UART1,
- .ops = &jz_clk_simple_ops,
- },
- [3] = {
- .name = "dma",
- .parent = &jz_clk_high_speed_peripheral.clk,
- .gate_bit = JZ_CLOCK_GATE_DMAC,
- .ops = &jz_clk_simple_ops,
- },
- [4] = {
- .name = "ipu",
- .parent = &jz_clk_high_speed_peripheral.clk,
- .gate_bit = JZ_CLOCK_GATE_IPU,
- .ops = &jz_clk_simple_ops,
- },
- [5] = {
- .name = "adc",
- .parent = &jz_clk_ext.clk,
- .gate_bit = JZ_CLOCK_GATE_ADC,
- .ops = &jz_clk_simple_ops,
- },
- [6] = {
- .name = "i2c",
- .parent = &jz_clk_ext.clk,
- .gate_bit = JZ_CLOCK_GATE_I2C,
- .ops = &jz_clk_simple_ops,
- },
- [7] = {
- .name = "aic",
- .parent = &jz_clk_ext.clk,
- .gate_bit = JZ_CLOCK_GATE_AIC,
- .ops = &jz_clk_simple_ops,
- },
-};
-
-static struct static_clk jz_clk_rtc = {
- .clk = {
- .name = "rtc",
- .gate_bit = JZ_CLOCK_GATE_RTC,
- .ops = &jz_clk_static_ops,
- },
- .rate = 32768,
-};
-
-int clk_enable(struct clk *clk)
-{
- if (!clk->ops->enable)
- return -EINVAL;
-
- return clk->ops->enable(clk);
-}
-EXPORT_SYMBOL_GPL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
- if (clk->ops->disable)
- clk->ops->disable(clk);
-}
-EXPORT_SYMBOL_GPL(clk_disable);
-
-int clk_is_enabled(struct clk *clk)
-{
- if (clk->ops->is_enabled)
- return clk->ops->is_enabled(clk);
-
- return 1;
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (clk->ops->get_rate)
- return clk->ops->get_rate(clk);
- if (clk->parent)
- return clk_get_rate(clk->parent);
-
- return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(clk_get_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- if (!clk->ops->set_rate)
- return -EINVAL;
- return clk->ops->set_rate(clk, rate);
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (clk->ops->round_rate)
- return clk->ops->round_rate(clk, rate);
-
- return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(clk_round_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret;
- int enabled;
-
- if (!clk->ops->set_parent)
- return -EINVAL;
-
- enabled = clk_is_enabled(clk);
- if (enabled)
- clk_disable(clk);
- ret = clk->ops->set_parent(clk, parent);
- if (enabled)
- clk_enable(clk);
-
- jz4740_clock_debugfs_update_parent(clk);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_parent);
-
-struct clk *clk_get(struct device *dev, const char *name)
-{
- struct clk *clk;
-
- list_for_each_entry(clk, &jz_clocks, list) {
- if (strcmp(clk->name, name) == 0)
- return clk;
- }
- return ERR_PTR(-ENXIO);
-}
-EXPORT_SYMBOL_GPL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL_GPL(clk_put);
-
-static inline void clk_add(struct clk *clk)
-{
- list_add_tail(&clk->list, &jz_clocks);
-
- jz4740_clock_debugfs_add_clk(clk);
-}
-
-static void clk_register_clks(void)
-{
- size_t i;
-
- clk_add(&jz_clk_ext.clk);
- clk_add(&jz_clk_pll);
- clk_add(&jz_clk_pll_half);
- clk_add(&jz_clk_cpu.clk);
- clk_add(&jz_clk_high_speed_peripheral.clk);
- clk_add(&jz_clk_low_speed_peripheral.clk);
- clk_add(&jz_clk_ko);
- clk_add(&jz_clk_ld);
- clk_add(&jz_clk_rtc.clk);
-
- for (i = 0; i < ARRAY_SIZE(jz4740_clock_divided_clks); ++i)
- clk_add(&jz4740_clock_divided_clks[i].clk);
-
- for (i = 0; i < ARRAY_SIZE(jz4740_clock_simple_clks); ++i)
- clk_add(&jz4740_clock_simple_clks[i]);
-}
-
-void jz4740_clock_set_wait_mode(enum jz4740_wait_mode mode)
-{
- switch (mode) {
- case JZ4740_WAIT_MODE_IDLE:
- jz_clk_reg_clear_bits(JZ_REG_CLOCK_LOW_POWER, JZ_CLOCK_LOW_POWER_MODE_SLEEP);
- break;
- case JZ4740_WAIT_MODE_SLEEP:
- jz_clk_reg_set_bits(JZ_REG_CLOCK_LOW_POWER, JZ_CLOCK_LOW_POWER_MODE_SLEEP);
- break;
- }
-}
-
-void jz4740_clock_udc_disable_auto_suspend(void)
-{
- jz_clk_reg_clear_bits(JZ_REG_CLOCK_GATE, JZ_CLOCK_GATE_UDC);
-}
-EXPORT_SYMBOL_GPL(jz4740_clock_udc_disable_auto_suspend);
-
-void jz4740_clock_udc_enable_auto_suspend(void)
-{
- jz_clk_reg_set_bits(JZ_REG_CLOCK_GATE, JZ_CLOCK_GATE_UDC);
-}
-EXPORT_SYMBOL_GPL(jz4740_clock_udc_enable_auto_suspend);
-
-void jz4740_clock_suspend(void)
-{
- jz_clk_reg_set_bits(JZ_REG_CLOCK_GATE,
- JZ_CLOCK_GATE_TCU | JZ_CLOCK_GATE_DMAC | JZ_CLOCK_GATE_UART0);
-
- jz_clk_reg_clear_bits(JZ_REG_CLOCK_PLL, JZ_CLOCK_PLL_ENABLED);
-}
-
-void jz4740_clock_resume(void)
-{
- uint32_t pll;
-
- jz_clk_reg_set_bits(JZ_REG_CLOCK_PLL, JZ_CLOCK_PLL_ENABLED);
-
- do {
- pll = jz_clk_reg_read(JZ_REG_CLOCK_PLL);
- } while (!(pll & JZ_CLOCK_PLL_STABLE));
-
- jz_clk_reg_clear_bits(JZ_REG_CLOCK_GATE,
- JZ_CLOCK_GATE_TCU | JZ_CLOCK_GATE_DMAC | JZ_CLOCK_GATE_UART0);
-}
-
-static int jz4740_clock_init(void)
-{
- uint32_t val;
-
- jz_clock_base = ioremap(JZ4740_CPM_BASE_ADDR, 0x100);
- if (!jz_clock_base)
- return -EBUSY;
-
- spin_lock_init(&jz_clock_lock);
-
- jz_clk_ext.rate = jz4740_clock_bdata.ext_rate;
- jz_clk_rtc.rate = jz4740_clock_bdata.rtc_rate;
-
- val = jz_clk_reg_read(JZ_REG_CLOCK_SPI);
-
- if (val & JZ_CLOCK_SPI_SRC_PLL)
- jz4740_clock_divided_clks[1].clk.parent = &jz_clk_pll_half;
-
- val = jz_clk_reg_read(JZ_REG_CLOCK_CTRL);
-
- if (val & JZ_CLOCK_CTRL_I2S_SRC_PLL)
- jz4740_clock_divided_clks[0].clk.parent = &jz_clk_pll_half;
-
- if (val & JZ_CLOCK_CTRL_UDC_SRC_PLL)
- jz4740_clock_simple_clks[0].parent = &jz_clk_pll_half;
-
- jz4740_clock_debugfs_init();
-
- clk_register_clks();
-
- return 0;
-}
-arch_initcall(jz4740_clock_init);
diff --git a/arch/mips/jz4740/clock.h b/arch/mips/jz4740/clock.h
deleted file mode 100644
index 5d07499..0000000
--- a/arch/mips/jz4740/clock.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- * JZ4740 SoC clock support
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __MIPS_JZ4740_CLOCK_H__
-#define __MIPS_JZ4740_CLOCK_H__
-
-#include <linux/list.h>
-
-struct jz4740_clock_board_data {
- unsigned long ext_rate;
- unsigned long rtc_rate;
-};
-
-extern struct jz4740_clock_board_data jz4740_clock_bdata;
-
-void jz4740_clock_suspend(void);
-void jz4740_clock_resume(void);
-
-struct clk;
-
-struct clk_ops {
- unsigned long (*get_rate)(struct clk *clk);
- unsigned long (*round_rate)(struct clk *clk, unsigned long rate);
- int (*set_rate)(struct clk *clk, unsigned long rate);
- int (*enable)(struct clk *clk);
- int (*disable)(struct clk *clk);
- int (*is_enabled)(struct clk *clk);
-
- int (*set_parent)(struct clk *clk, struct clk *parent);
-
-};
-
-struct clk {
- const char *name;
- struct clk *parent;
-
- uint32_t gate_bit;
-
- const struct clk_ops *ops;
-
- struct list_head list;
-
-#ifdef CONFIG_DEBUG_FS
- struct dentry *debugfs_entry;
- struct dentry *debugfs_parent_entry;
-#endif
-
-};
-
-#define JZ4740_CLK_NOT_GATED ((uint32_t)-1)
-
-int clk_is_enabled(struct clk *clk);
-
-#ifdef CONFIG_DEBUG_FS
-void jz4740_clock_debugfs_init(void);
-void jz4740_clock_debugfs_add_clk(struct clk *clk);
-void jz4740_clock_debugfs_update_parent(struct clk *clk);
-#else
-static inline void jz4740_clock_debugfs_init(void) {};
-static inline void jz4740_clock_debugfs_add_clk(struct clk *clk) {};
-static inline void jz4740_clock_debugfs_update_parent(struct clk *clk) {};
-#endif
-
-#endif
diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c
index 00b798d..54c80d4 100644
--- a/arch/mips/jz4740/gpio.c
+++ b/arch/mips/jz4740/gpio.c
@@ -21,6 +21,7 @@
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/irqchip/ingenic.h>
#include <linux/bitops.h>
#include <linux/debugfs.h>
@@ -28,8 +29,6 @@
#include <asm/mach-jz4740/base.h>
-#include "irq.h"
-
#define JZ4740_GPIO_BASE_A (32*0)
#define JZ4740_GPIO_BASE_B (32*1)
#define JZ4740_GPIO_BASE_C (32*2)
@@ -442,8 +441,8 @@ static void jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id)
ct->chip.irq_mask = irq_gc_mask_disable_reg;
ct->chip.irq_unmask = jz_gpio_irq_unmask;
ct->chip.irq_ack = irq_gc_ack_set_bit;
- ct->chip.irq_suspend = jz4740_irq_suspend;
- ct->chip.irq_resume = jz4740_irq_resume;
+ ct->chip.irq_suspend = ingenic_intc_irq_suspend;
+ ct->chip.irq_resume = ingenic_intc_irq_resume;
ct->chip.irq_startup = jz_gpio_irq_startup;
ct->chip.irq_shutdown = jz_gpio_irq_shutdown;
ct->chip.irq_set_type = jz_gpio_irq_set_type;
diff --git a/arch/mips/jz4740/irq.c b/arch/mips/jz4740/irq.c
deleted file mode 100644
index 97206b3..0000000
--- a/arch/mips/jz4740/irq.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
- * JZ4740 platform IRQ support
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/irq_cpu.h>
-
-#include <asm/mach-jz4740/base.h>
-#include <asm/mach-jz4740/irq.h>
-
-#include "irq.h"
-
-static void __iomem *jz_intc_base;
-
-#define JZ_REG_INTC_STATUS 0x00
-#define JZ_REG_INTC_MASK 0x04
-#define JZ_REG_INTC_SET_MASK 0x08
-#define JZ_REG_INTC_CLEAR_MASK 0x0c
-#define JZ_REG_INTC_PENDING 0x10
-
-static irqreturn_t jz4740_cascade(int irq, void *data)
-{
- uint32_t irq_reg;
-
- irq_reg = readl(jz_intc_base + JZ_REG_INTC_PENDING);
-
- if (irq_reg)
- generic_handle_irq(__fls(irq_reg) + JZ4740_IRQ_BASE);
-
- return IRQ_HANDLED;
-}
-
-static void jz4740_irq_set_mask(struct irq_chip_generic *gc, uint32_t mask)
-{
- struct irq_chip_regs *regs = &gc->chip_types->regs;
-
- writel(mask, gc->reg_base + regs->enable);
- writel(~mask, gc->reg_base + regs->disable);
-}
-
-void jz4740_irq_suspend(struct irq_data *data)
-{
- struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
- jz4740_irq_set_mask(gc, gc->wake_active);
-}
-
-void jz4740_irq_resume(struct irq_data *data)
-{
- struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
- jz4740_irq_set_mask(gc, gc->mask_cache);
-}
-
-static struct irqaction jz4740_cascade_action = {
- .handler = jz4740_cascade,
- .name = "JZ4740 cascade interrupt",
-};
-
-void __init arch_init_irq(void)
-{
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
-
- mips_cpu_irq_init();
-
- jz_intc_base = ioremap(JZ4740_INTC_BASE_ADDR, 0x14);
-
- /* Mask all irqs */
- writel(0xffffffff, jz_intc_base + JZ_REG_INTC_SET_MASK);
-
- gc = irq_alloc_generic_chip("INTC", 1, JZ4740_IRQ_BASE, jz_intc_base,
- handle_level_irq);
-
- gc->wake_enabled = IRQ_MSK(32);
-
- ct = gc->chip_types;
- ct->regs.enable = JZ_REG_INTC_CLEAR_MASK;
- ct->regs.disable = JZ_REG_INTC_SET_MASK;
- ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
- ct->chip.irq_mask = irq_gc_mask_disable_reg;
- ct->chip.irq_mask_ack = irq_gc_mask_disable_reg;
- ct->chip.irq_set_wake = irq_gc_set_wake;
- ct->chip.irq_suspend = jz4740_irq_suspend;
- ct->chip.irq_resume = jz4740_irq_resume;
-
- irq_setup_generic_chip(gc, IRQ_MSK(32), 0, 0, IRQ_NOPROBE | IRQ_LEVEL);
-
- setup_irq(2, &jz4740_cascade_action);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
- if (pending & STATUSF_IP2)
- do_IRQ(2);
- else if (pending & STATUSF_IP3)
- do_IRQ(3);
- else
- spurious_interrupt();
-}
-
-#ifdef CONFIG_DEBUG_FS
-
-static inline void intc_seq_reg(struct seq_file *s, const char *name,
- unsigned int reg)
-{
- seq_printf(s, "%s:\t\t%08x\n", name, readl(jz_intc_base + reg));
-}
-
-static int intc_regs_show(struct seq_file *s, void *unused)
-{
- intc_seq_reg(s, "Status", JZ_REG_INTC_STATUS);
- intc_seq_reg(s, "Mask", JZ_REG_INTC_MASK);
- intc_seq_reg(s, "Pending", JZ_REG_INTC_PENDING);
-
- return 0;
-}
-
-static int intc_regs_open(struct inode *inode, struct file *file)
-{
- return single_open(file, intc_regs_show, NULL);
-}
-
-static const struct file_operations intc_regs_operations = {
- .open = intc_regs_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init intc_debugfs_init(void)
-{
- (void) debugfs_create_file("jz_regs_intc", S_IFREG | S_IRUGO,
- NULL, NULL, &intc_regs_operations);
- return 0;
-}
-subsys_initcall(intc_debugfs_init);
-
-#endif
diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c
index 0b12f27..e8a463b 100644
--- a/arch/mips/jz4740/platform.c
+++ b/arch/mips/jz4740/platform.c
@@ -13,6 +13,7 @@
*
*/
+#include <linux/clk.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
@@ -29,7 +30,6 @@
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
-#include "serial.h"
#include "clock.h"
/* OHCI controller */
@@ -279,42 +279,6 @@ struct platform_device jz4740_adc_device = {
.resource = jz4740_adc_resources,
};
-/* Serial */
-#define JZ4740_UART_DATA(_id) \
- { \
- .flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE, \
- .iotype = UPIO_MEM, \
- .regshift = 2, \
- .serial_out = jz4740_serial_out, \
- .type = PORT_16550, \
- .mapbase = JZ4740_UART ## _id ## _BASE_ADDR, \
- .irq = JZ4740_IRQ_UART ## _id, \
- }
-
-static struct plat_serial8250_port jz4740_uart_data[] = {
- JZ4740_UART_DATA(0),
- JZ4740_UART_DATA(1),
- {},
-};
-
-static struct platform_device jz4740_uart_device = {
- .name = "serial8250",
- .id = 0,
- .dev = {
- .platform_data = jz4740_uart_data,
- },
-};
-
-void jz4740_serial_device_register(void)
-{
- struct plat_serial8250_port *p;
-
- for (p = jz4740_uart_data; p->flags != 0; ++p)
- p->uartclk = jz4740_clock_bdata.ext_rate;
-
- platform_device_register(&jz4740_uart_device);
-}
-
/* Watchdog */
static struct resource jz4740_wdt_resources[] = {
{
diff --git a/arch/mips/jz4740/pm.c b/arch/mips/jz4740/pm.c
index d8e2130..2d8653f 100644
--- a/arch/mips/jz4740/pm.c
+++ b/arch/mips/jz4740/pm.c
@@ -20,8 +20,6 @@
#include <asm/mach-jz4740/clock.h>
-#include "clock.h"
-
static int jz4740_pm_enter(suspend_state_t state)
{
jz4740_clock_suspend();
diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
index 5a93f38..6984683 100644
--- a/arch/mips/jz4740/prom.c
+++ b/arch/mips/jz4740/prom.c
@@ -53,16 +53,3 @@ void __init prom_init(void)
void __init prom_free_prom_memory(void)
{
}
-
-#define UART_REG(_reg) ((void __iomem *)CKSEG1ADDR(JZ4740_UART0_BASE_ADDR + (_reg << 2)))
-
-void prom_putchar(char c)
-{
- uint8_t lsr;
-
- do {
- lsr = readb(UART_REG(UART_LSR));
- } while ((lsr & UART_LSR_TEMT) == 0);
-
- writeb(c, UART_REG(UART_TX));
-}
diff --git a/arch/mips/jz4740/reset.c b/arch/mips/jz4740/reset.c
index b6c6343..954e669 100644
--- a/arch/mips/jz4740/reset.c
+++ b/arch/mips/jz4740/reset.c
@@ -12,6 +12,7 @@
*
*/
+#include <linux/clk.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/pm.h>
@@ -79,12 +80,20 @@ static void jz4740_power_off(void)
void __iomem *rtc_base = ioremap(JZ4740_RTC_BASE_ADDR, 0x38);
unsigned long wakeup_filter_ticks;
unsigned long reset_counter_ticks;
+ struct clk *rtc_clk;
+ unsigned long rtc_rate;
+
+ rtc_clk = clk_get(NULL, "rtc");
+ if (IS_ERR(rtc_clk))
+ panic("unable to get RTC clock");
+ rtc_rate = clk_get_rate(rtc_clk);
+ clk_put(rtc_clk);
/*
* Set minimum wakeup pin assertion time: 100 ms.
* Range is 0 to 2 sec if RTC is clocked at 32 kHz.
*/
- wakeup_filter_ticks = (100 * jz4740_clock_bdata.rtc_rate) / 1000;
+ wakeup_filter_ticks = (100 * rtc_rate) / 1000;
if (wakeup_filter_ticks < JZ_RTC_WAKEUP_FILTER_MASK)
wakeup_filter_ticks &= JZ_RTC_WAKEUP_FILTER_MASK;
else
@@ -96,7 +105,7 @@ static void jz4740_power_off(void)
* Set reset pin low-level assertion time after wakeup: 60 ms.
* Range is 0 to 125 ms if RTC is clocked at 32 kHz.
*/
- reset_counter_ticks = (60 * jz4740_clock_bdata.rtc_rate) / 1000;
+ reset_counter_ticks = (60 * rtc_rate) / 1000;
if (reset_counter_ticks < JZ_RTC_RESET_COUNTER_MASK)
reset_counter_ticks &= JZ_RTC_RESET_COUNTER_MASK;
else
diff --git a/arch/mips/jz4740/serial.c b/arch/mips/jz4740/serial.c
deleted file mode 100644
index d23de45..0000000
--- a/arch/mips/jz4740/serial.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- * JZ4740 serial support
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-void jz4740_serial_out(struct uart_port *p, int offset, int value)
-{
- switch (offset) {
- case UART_FCR:
- value |= 0x10; /* Enable uart module */
- break;
- case UART_IER:
- value |= (value & 0x4) << 2;
- break;
- default:
- break;
- }
- writeb(value, p->membase + (offset << p->regshift));
-}
diff --git a/arch/mips/jz4740/serial.h b/arch/mips/jz4740/serial.h
deleted file mode 100644
index 8eb715b..0000000
--- a/arch/mips/jz4740/serial.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- * JZ4740 serial support
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __MIPS_JZ4740_SERIAL_H__
-#define __MIPS_JZ4740_SERIAL_H__
-
-struct uart_port;
-
-void jz4740_serial_out(struct uart_port *p, int offset, int value);
-
-#endif
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index ef796f9..510fc0d 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -16,9 +16,14 @@
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/irqchip.h>
#include <linux/kernel.h>
+#include <linux/libfdt.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
#include <asm/bootinfo.h>
+#include <asm/prom.h>
#include <asm/mach-jz4740/base.h>
@@ -51,11 +56,40 @@ static void __init jz4740_detect_mem(void)
void __init plat_mem_setup(void)
{
+ int offset;
+
jz4740_reset_init();
- jz4740_detect_mem();
+ __dt_setup_arch(__dtb_start);
+
+ offset = fdt_path_offset(__dtb_start, "/memory");
+ if (offset < 0)
+ jz4740_detect_mem();
}
+void __init device_tree_init(void)
+{
+ if (!initial_boot_params)
+ return;
+
+ unflatten_and_copy_device_tree();
+}
+
+static int __init populate_machine(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ return 0;
+}
+arch_initcall(populate_machine);
+
const char *get_system_type(void)
{
+ if (config_enabled(CONFIG_MACH_JZ4780))
+ return "JZ4780";
+
return "JZ4740";
}
+
+void __init arch_init_irq(void)
+{
+ irqchip_init();
+}
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
index 72b0cec..7ab47fe 100644
--- a/arch/mips/jz4740/time.c
+++ b/arch/mips/jz4740/time.c
@@ -13,6 +13,8 @@
*
*/
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/time.h>
@@ -20,6 +22,7 @@
#include <linux/clockchips.h>
#include <linux/sched_clock.h>
+#include <asm/mach-jz4740/clock.h>
#include <asm/mach-jz4740/irq.h>
#include <asm/mach-jz4740/timer.h>
#include <asm/time.h>
@@ -99,7 +102,12 @@ static struct clock_event_device jz4740_clockevent = {
.set_next_event = jz4740_clockevent_set_next,
.set_mode = jz4740_clockevent_set_mode,
.rating = 200,
+#ifdef CONFIG_MACH_JZ4740
.irq = JZ4740_IRQ_TCU0,
+#endif
+#ifdef CONFIG_MACH_JZ4780
+ .irq = JZ4780_IRQ_TCU2,
+#endif
};
static struct irqaction timer_irqaction = {
@@ -114,10 +122,17 @@ void __init plat_time_init(void)
int ret;
uint32_t clk_rate;
uint16_t ctrl;
+ struct clk *ext_clk;
+ of_clk_init(NULL);
jz4740_timer_init();
- clk_rate = jz4740_clock_bdata.ext_rate >> 4;
+ ext_clk = clk_get(NULL, "ext");
+ if (IS_ERR(ext_clk))
+ panic("unable to get ext clock");
+ clk_rate = clk_get_rate(ext_clk) >> 4;
+ clk_put(ext_clk);
+
jz4740_jiffies_per_tick = DIV_ROUND_CLOSEST(clk_rate, HZ);
clockevent_set_clock(&jz4740_clockevent, clk_rate);
@@ -134,7 +149,7 @@ void __init plat_time_init(void)
sched_clock_register(jz4740_read_sched_clock, 16, clk_rate);
- setup_irq(JZ4740_IRQ_TCU0, &timer_irqaction);
+ setup_irq(jz4740_clockevent.irq, &timer_irqaction);
ctrl = JZ_TIMER_CTRL_PRESCALE_16 | JZ_TIMER_CTRL_SRC_EXT;
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index d3d2ff2..3f5cf8a 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -62,7 +62,6 @@ obj-$(CONFIG_MIPS_VPE_APSP_API_CMP) += rtlx-cmp.o
obj-$(CONFIG_MIPS_VPE_APSP_API_MT) += rtlx-mt.o
obj-$(CONFIG_I8259) += i8259.o
-obj-$(CONFIG_IRQ_CPU) += irq_cpu.o
obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o
obj-$(CONFIG_MIPS_MSC) += irq-msc01.o
obj-$(CONFIG_IRQ_TXX9) += irq_txx9.o
@@ -77,6 +76,7 @@ obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_PROC_FS) += proc.o
+obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o
obj-$(CONFIG_64BIT) += cpu-bugs64.o
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 209e5b7..dbe0792 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -945,7 +945,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
- MIPS_CPU_LLSC;
+ MIPS_CPU_LLSC | MIPS_CPU_BP_GHIST;
c->tlbsize = 64;
break;
case PRID_IMP_R14000:
@@ -960,7 +960,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
- MIPS_CPU_LLSC;
+ MIPS_CPU_LLSC | MIPS_CPU_BP_GHIST;
c->tlbsize = 64;
break;
case PRID_IMP_LOONGSON_64: /* Loongson-2/3 */
@@ -1443,7 +1443,9 @@ void cpu_probe(void)
case PRID_COMP_CAVIUM:
cpu_probe_cavium(c, cpu);
break;
- case PRID_COMP_INGENIC:
+ case PRID_COMP_INGENIC_D0:
+ case PRID_COMP_INGENIC_D1:
+ case PRID_COMP_INGENIC_E1:
cpu_probe_ingenic(c, cpu);
break;
case PRID_COMP_NETLOGIC:
@@ -1478,6 +1480,10 @@ void cpu_probe(void)
else
cpu_set_nofpu_opts(c);
+ if (cpu_has_bp_ghist)
+ write_c0_r10k_diag(read_c0_r10k_diag() |
+ R10K_DIAG_E_GHIST);
+
if (cpu_has_mips_r2_r6) {
c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
/* R2 has Performance Counter Interrupt indicator */
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 95afd66..4e4cc5b 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -94,6 +94,22 @@ NESTED(kernel_entry, 16, sp) # kernel entry point
jr t0
0:
+#ifdef CONFIG_MIPS_RAW_APPENDED_DTB
+ PTR_LA t0, __appended_dtb
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ li t1, 0xd00dfeed
+#else
+ li t1, 0xedfe0dd0
+#endif
+ lw t2, (t0)
+ bne t1, t2, not_found
+ nop
+
+ move a1, t0
+ PTR_LI a0, -2
+not_found:
+#endif
PTR_LA t0, __bss_start # clear .bss
LONG_S zero, (t0)
PTR_LA t1, __bss_stop - LONGSIZE
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
index a74ec3a..74f6752 100644
--- a/arch/mips/kernel/i8259.c
+++ b/arch/mips/kernel/i8259.c
@@ -14,6 +14,7 @@
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/kernel.h>
+#include <linux/of_irq.h>
#include <linux/spinlock.h>
#include <linux/syscore_ops.h>
#include <linux/irq.h>
@@ -21,6 +22,8 @@
#include <asm/i8259.h>
#include <asm/io.h>
+#include "../../drivers/irqchip/irqchip.h"
+
/*
* This is the 'legacy' 8259A Programmable Interrupt Controller,
* present in the majority of PC/AT boxes.
@@ -327,7 +330,7 @@ static struct irq_domain_ops i8259A_ops = {
* driver compatibility reasons interrupts 0 - 15 to be the i8259
* interrupts even if the hardware uses a different interrupt numbering.
*/
-void __init init_i8259_irqs(void)
+struct irq_domain * __init __init_i8259_irqs(struct device_node *node)
{
struct irq_domain *domain;
@@ -336,10 +339,46 @@ void __init init_i8259_irqs(void)
init_8259A(0);
- domain = irq_domain_add_legacy(NULL, 16, I8259A_IRQ_BASE, 0,
+ domain = irq_domain_add_legacy(node, 16, I8259A_IRQ_BASE, 0,
&i8259A_ops, NULL);
if (!domain)
panic("Failed to add i8259 IRQ domain");
setup_irq(I8259A_IRQ_BASE + PIC_CASCADE_IR, &irq2);
+ return domain;
+}
+
+void __init init_i8259_irqs(void)
+{
+ __init_i8259_irqs(NULL);
+}
+
+static void i8259_irq_dispatch(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_domain *domain = irq_get_handler_data(irq);
+ int hwirq = i8259_irq();
+
+ if (hwirq < 0)
+ return;
+
+ irq = irq_linear_revmap(domain, hwirq);
+ generic_handle_irq(irq);
+}
+
+int __init i8259_of_init(struct device_node *node, struct device_node *parent)
+{
+ struct irq_domain *domain;
+ unsigned int parent_irq;
+
+ parent_irq = irq_of_parse_and_map(node, 0);
+ if (!parent_irq) {
+ pr_err("Failed to map i8259 parent IRQ\n");
+ return -ENODEV;
+ }
+
+ domain = __init_i8259_irqs(node);
+ irq_set_handler_data(parent_irq, domain);
+ irq_set_chained_handler(parent_irq, i8259_irq_dispatch);
+ return 0;
}
+IRQCHIP_DECLARE(i8259, "intel,i8259", i8259_of_init);
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index 3c8a18a..8eb5af8 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -25,48 +25,6 @@
#include <linux/atomic.h>
#include <asm/uaccess.h>
-#ifdef CONFIG_KGDB
-int kgdb_early_setup;
-#endif
-
-static DECLARE_BITMAP(irq_map, NR_IRQS);
-
-int allocate_irqno(void)
-{
- int irq;
-
-again:
- irq = find_first_zero_bit(irq_map, NR_IRQS);
-
- if (irq >= NR_IRQS)
- return -ENOSPC;
-
- if (test_and_set_bit(irq, irq_map))
- goto again;
-
- return irq;
-}
-
-/*
- * Allocate the 16 legacy interrupts for i8259 devices. This happens early
- * in the kernel initialization so treating allocation failure as BUG() is
- * ok.
- */
-void __init alloc_legacy_irqno(void)
-{
- int i;
-
- for (i = 0; i <= 16; i++)
- BUG_ON(test_and_set_bit(i, irq_map));
-}
-
-void free_irqno(unsigned int irq)
-{
- smp_mb__before_atomic();
- clear_bit(irq, irq_map);
- smp_mb__after_atomic();
-}
-
/*
* 'what should we do if we get a hw irq event on an illegal vector'.
* each architecture has to answer this themselves.
@@ -93,20 +51,10 @@ void __init init_IRQ(void)
{
int i;
-#ifdef CONFIG_KGDB
- if (kgdb_early_setup)
- return;
-#endif
-
for (i = 0; i < NR_IRQS; i++)
irq_set_noprobe(i);
arch_init_irq();
-
-#ifdef CONFIG_KGDB
- if (!kgdb_early_setup)
- kgdb_early_setup = 1;
-#endif
}
#ifdef CONFIG_DEBUG_STACKOVERFLOW
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
index 7afcc2f..de63d36 100644
--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -378,10 +378,6 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
struct kgdb_arch arch_kgdb_ops;
-/*
- * We use kgdb_early_setup so that functions we need to call now don't
- * cause trouble when called again later.
- */
int kgdb_arch_init(void)
{
union mips_instruction insn = {
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index e303cb1..b130033 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -18,6 +18,7 @@
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
+#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/prom.h>
diff --git a/arch/mips/kernel/sysrq.c b/arch/mips/kernel/sysrq.c
new file mode 100644
index 0000000..5b539f5
--- /dev/null
+++ b/arch/mips/kernel/sysrq.c
@@ -0,0 +1,77 @@
+/*
+ * MIPS specific sysrq operations.
+ *
+ * Copyright (C) 2015 Imagination Technologies Ltd.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/sysrq.h>
+#include <linux/workqueue.h>
+
+#include <asm/cpu-features.h>
+#include <asm/mipsregs.h>
+#include <asm/tlbdebug.h>
+
+/*
+ * Dump TLB entries on all CPUs.
+ */
+
+static DEFINE_SPINLOCK(show_lock);
+
+static void sysrq_tlbdump_single(void *dummy)
+{
+ const int field = 2 * sizeof(unsigned long);
+ unsigned long flags;
+
+ spin_lock_irqsave(&show_lock, flags);
+
+ pr_info("CPU%d:\n", smp_processor_id());
+ pr_info("Index : %0x\n", read_c0_index());
+ pr_info("Pagemask: %0x\n", read_c0_pagemask());
+ pr_info("EntryHi : %0*lx\n", field, read_c0_entryhi());
+ pr_info("EntryLo0: %0*lx\n", field, read_c0_entrylo0());
+ pr_info("EntryLo1: %0*lx\n", field, read_c0_entrylo1());
+ pr_info("Wired : %0x\n", read_c0_wired());
+ pr_info("Pagegrain: %0x\n", read_c0_pagegrain());
+ if (cpu_has_htw) {
+ pr_info("PWField : %0*lx\n", field, read_c0_pwfield());
+ pr_info("PWSize : %0*lx\n", field, read_c0_pwsize());
+ pr_info("PWCtl : %0x\n", read_c0_pwctl());
+ }
+ pr_info("\n");
+ dump_tlb_all();
+ pr_info("\n");
+
+ spin_unlock_irqrestore(&show_lock, flags);
+}
+
+#ifdef CONFIG_SMP
+static void sysrq_tlbdump_othercpus(struct work_struct *dummy)
+{
+ smp_call_function(sysrq_tlbdump_single, NULL, 0);
+}
+
+static DECLARE_WORK(sysrq_tlbdump, sysrq_tlbdump_othercpus);
+#endif
+
+static void sysrq_handle_tlbdump(int key)
+{
+ sysrq_tlbdump_single(NULL);
+#ifdef CONFIG_SMP
+ schedule_work(&sysrq_tlbdump);
+#endif
+}
+
+static struct sysrq_key_op sysrq_tlbdump_op = {
+ .handler = sysrq_handle_tlbdump,
+ .help_msg = "show-tlbs(x)",
+ .action_msg = "Show TLB entries",
+ .enable_mask = SYSRQ_ENABLE_DUMP,
+};
+
+static int __init mips_sysrq_init(void)
+{
+ return register_sysrq_key('x', &sysrq_tlbdump_op);
+}
+arch_initcall(mips_sysrq_init);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index d2d1c19..2a7b38e 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -236,6 +236,7 @@ static void __show_regs(const struct pt_regs *regs)
{
const int field = 2 * sizeof(unsigned long);
unsigned int cause = regs->cp0_cause;
+ unsigned int exccode;
int i;
show_regs_print_info(KERN_DEFAULT);
@@ -317,10 +318,10 @@ static void __show_regs(const struct pt_regs *regs)
}
printk("\n");
- printk("Cause : %08x\n", cause);
+ exccode = (cause & CAUSEF_EXCCODE) >> CAUSEB_EXCCODE;
+ printk("Cause : %08x (ExcCode %02x)\n", cause, exccode);
- cause = (cause & CAUSEF_EXCCODE) >> CAUSEB_EXCCODE;
- if (1 <= cause && cause <= 5)
+ if (1 <= exccode && exccode <= 5)
printk("BadVA : %0*lx\n", field, regs->cp0_badvaddr);
printk("PrId : %08x (%s)\n", read_c0_prid(),
@@ -2184,11 +2185,6 @@ void __init trap_init(void)
check_wait();
-#if defined(CONFIG_KGDB)
- if (kgdb_early_setup)
- return; /* Already done */
-#endif
-
if (cpu_has_veic || cpu_has_vint) {
unsigned long size = 0x200 + VECTORSPACING*64;
ebase = (unsigned long)
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 3b46f7c..07d32a4 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -125,8 +125,14 @@ SECTIONS
.exit.data : {
EXIT_DATA
}
-
+#ifdef CONFIG_SMP
PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
+#endif
+#ifdef CONFIG_MIPS_RAW_APPENDED_DTB
+ __appended_dtb = .;
+ /* leave space for appended DTB */
+ . += 0x100000;
+#endif
/*
* Align to 64K in attempt to eliminate holes before the
* .bss..swapper_pg_dir section at the start of .bss. This
diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c
index 32b9f21..167f3563 100644
--- a/arch/mips/lib/dump_tlb.c
+++ b/arch/mips/lib/dump_tlb.c
@@ -7,6 +7,7 @@
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <asm/hazards.h>
#include <asm/mipsregs.h>
#include <asm/page.h>
#include <asm/pgtable.h>
@@ -40,17 +41,20 @@ static inline const char *msk2str(unsigned int mask)
return "";
}
-#define BARRIER() \
- __asm__ __volatile__( \
- ".set\tnoreorder\n\t" \
- "nop;nop;nop;nop;nop;nop;nop\n\t" \
- ".set\treorder");
-
static void dump_tlb(int first, int last)
{
unsigned long s_entryhi, entryhi, asid;
- unsigned long long entrylo0, entrylo1;
+ unsigned long long entrylo0, entrylo1, pa;
unsigned int s_index, s_pagemask, pagemask, c0, c1, i;
+#ifdef CONFIG_32BIT
+ bool xpa = cpu_has_xpa && (read_c0_pagegrain() & PG_ELPA);
+ int pwidth = xpa ? 11 : 8;
+ int vwidth = 8;
+#else
+ bool xpa = false;
+ int pwidth = 11;
+ int vwidth = 11;
+#endif
s_pagemask = read_c0_pagemask();
s_entryhi = read_c0_entryhi();
@@ -59,46 +63,74 @@ static void dump_tlb(int first, int last)
for (i = first; i <= last; i++) {
write_c0_index(i);
- BARRIER();
+ mtc0_tlbr_hazard();
tlb_read();
- BARRIER();
+ tlb_read_hazard();
pagemask = read_c0_pagemask();
entryhi = read_c0_entryhi();
entrylo0 = read_c0_entrylo0();
entrylo1 = read_c0_entrylo1();
- /* Unused entries have a virtual address of CKSEG0. */
- if ((entryhi & ~0x1ffffUL) != CKSEG0
- && (entryhi & 0xff) == asid) {
-#ifdef CONFIG_32BIT
- int width = 8;
-#else
- int width = 11;
-#endif
- /*
- * Only print entries in use
- */
- printk("Index: %2d pgmask=%s ", i, msk2str(pagemask));
+ /* EHINV bit marks entire entry as invalid */
+ if (cpu_has_tlbinv && entryhi & MIPS_ENTRYHI_EHINV)
+ continue;
+ /*
+ * Prior to tlbinv, unused entries have a virtual address of
+ * CKSEG0.
+ */
+ if ((entryhi & ~0x1ffffUL) == CKSEG0)
+ continue;
+ /*
+ * ASID takes effect in absence of G (global) bit.
+ * We check both G bits, even though architecturally they should
+ * match one another, because some revisions of the SB1 core may
+ * leave only a single G bit set after a machine check exception
+ * due to duplicate TLB entry.
+ */
+ if (!((entrylo0 | entrylo1) & MIPS_ENTRYLO_G) &&
+ (entryhi & 0xff) != asid)
+ continue;
+
+ /*
+ * Only print entries in use
+ */
+ printk("Index: %2d pgmask=%s ", i, msk2str(pagemask));
- c0 = (entrylo0 >> 3) & 7;
- c1 = (entrylo1 >> 3) & 7;
+ c0 = (entrylo0 & MIPS_ENTRYLO_C) >> MIPS_ENTRYLO_C_SHIFT;
+ c1 = (entrylo1 & MIPS_ENTRYLO_C) >> MIPS_ENTRYLO_C_SHIFT;
- printk("va=%0*lx asid=%02lx\n",
- width, (entryhi & ~0x1fffUL),
- entryhi & 0xff);
- printk("\t[pa=%0*llx c=%d d=%d v=%d g=%d] ",
- width,
- (entrylo0 << 6) & PAGE_MASK, c0,
- (entrylo0 & 4) ? 1 : 0,
- (entrylo0 & 2) ? 1 : 0,
- (entrylo0 & 1) ? 1 : 0);
- printk("[pa=%0*llx c=%d d=%d v=%d g=%d]\n",
- width,
- (entrylo1 << 6) & PAGE_MASK, c1,
- (entrylo1 & 4) ? 1 : 0,
- (entrylo1 & 2) ? 1 : 0,
- (entrylo1 & 1) ? 1 : 0);
- }
+ printk("va=%0*lx asid=%02lx\n",
+ vwidth, (entryhi & ~0x1fffUL),
+ entryhi & 0xff);
+ /* RI/XI are in awkward places, so mask them off separately */
+ pa = entrylo0 & ~(MIPS_ENTRYLO_RI | MIPS_ENTRYLO_XI);
+ if (xpa)
+ pa |= (unsigned long long)readx_c0_entrylo0() << 30;
+ pa = (pa << 6) & PAGE_MASK;
+ printk("\t[");
+ if (cpu_has_rixi)
+ printk("ri=%d xi=%d ",
+ (entrylo0 & MIPS_ENTRYLO_RI) ? 1 : 0,
+ (entrylo0 & MIPS_ENTRYLO_XI) ? 1 : 0);
+ printk("pa=%0*llx c=%d d=%d v=%d g=%d] [",
+ pwidth, pa, c0,
+ (entrylo0 & MIPS_ENTRYLO_D) ? 1 : 0,
+ (entrylo0 & MIPS_ENTRYLO_V) ? 1 : 0,
+ (entrylo0 & MIPS_ENTRYLO_G) ? 1 : 0);
+ /* RI/XI are in awkward places, so mask them off separately */
+ pa = entrylo1 & ~(MIPS_ENTRYLO_RI | MIPS_ENTRYLO_XI);
+ if (xpa)
+ pa |= (unsigned long long)readx_c0_entrylo1() << 30;
+ pa = (pa << 6) & PAGE_MASK;
+ if (cpu_has_rixi)
+ printk("ri=%d xi=%d ",
+ (entrylo1 & MIPS_ENTRYLO_RI) ? 1 : 0,
+ (entrylo1 & MIPS_ENTRYLO_XI) ? 1 : 0);
+ printk("pa=%0*llx c=%d d=%d v=%d g=%d]\n",
+ pwidth, pa, c1,
+ (entrylo1 & MIPS_ENTRYLO_D) ? 1 : 0,
+ (entrylo1 & MIPS_ENTRYLO_V) ? 1 : 0,
+ (entrylo1 & MIPS_ENTRYLO_G) ? 1 : 0);
}
printk("\n");
diff --git a/arch/mips/lib/r3k_dump_tlb.c b/arch/mips/lib/r3k_dump_tlb.c
index 975a138..8e0d3cf 100644
--- a/arch/mips/lib/r3k_dump_tlb.c
+++ b/arch/mips/lib/r3k_dump_tlb.c
@@ -14,8 +14,6 @@
#include <asm/pgtable.h>
#include <asm/tlbdebug.h>
-extern int r3k_have_wired_reg; /* defined in tlb-r3k.c */
-
static void dump_tlb(int first, int last)
{
int i;
@@ -35,8 +33,9 @@ static void dump_tlb(int first, int last)
entrylo0 = read_c0_entrylo0();
/* Unused entries have a virtual address of KSEG0. */
- if ((entryhi & PAGE_MASK) != KSEG0
- && (entryhi & ASID_MASK) == asid) {
+ if ((entryhi & PAGE_MASK) != KSEG0 &&
+ (entrylo0 & R3K_ENTRYLO_G ||
+ (entryhi & ASID_MASK) == asid)) {
/*
* Only print entries in use
*/
@@ -47,10 +46,10 @@ static void dump_tlb(int first, int last)
entryhi & PAGE_MASK,
entryhi & ASID_MASK,
entrylo0 & PAGE_MASK,
- (entrylo0 & (1 << 11)) ? 1 : 0,
- (entrylo0 & (1 << 10)) ? 1 : 0,
- (entrylo0 & (1 << 9)) ? 1 : 0,
- (entrylo0 & (1 << 8)) ? 1 : 0);
+ (entrylo0 & R3K_ENTRYLO_N) ? 1 : 0,
+ (entrylo0 & R3K_ENTRYLO_D) ? 1 : 0,
+ (entrylo0 & R3K_ENTRYLO_V) ? 1 : 0,
+ (entrylo0 & R3K_ENTRYLO_G) ? 1 : 0);
}
}
printk("\n");
diff --git a/arch/mips/loongson1/Kconfig b/arch/mips/loongson32/Kconfig
index a2b796e..7704f20 100644
--- a/arch/mips/loongson1/Kconfig
+++ b/arch/mips/loongson32/Kconfig
@@ -1,4 +1,4 @@
-if MACH_LOONGSON1
+if MACH_LOONGSON32
choice
prompt "Machine Type"
@@ -10,7 +10,7 @@ config LOONGSON1_LS1B
select SYS_HAS_CPU_LOONGSON1B
select DMA_NONCOHERENT
select BOOT_ELF32
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_HIGHMEM
@@ -58,4 +58,4 @@ config TIMER_USE_PWM3
endchoice
-endif # MACH_LOONGSON1
+endif # MACH_LOONGSON32
diff --git a/arch/mips/loongson1/Makefile b/arch/mips/loongson32/Makefile
index 9719c75..5f4bd6e 100644
--- a/arch/mips/loongson1/Makefile
+++ b/arch/mips/loongson32/Makefile
@@ -2,7 +2,7 @@
# Common code for all Loongson 1 based systems
#
-obj-$(CONFIG_MACH_LOONGSON1) += common/
+obj-$(CONFIG_MACH_LOONGSON32) += common/
#
# Loongson LS1B board
diff --git a/arch/mips/loongson1/Platform b/arch/mips/loongson32/Platform
index 1186344..ebb6dc2 100644
--- a/arch/mips/loongson1/Platform
+++ b/arch/mips/loongson32/Platform
@@ -2,6 +2,6 @@ cflags-$(CONFIG_CPU_LOONGSON1) += \
$(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
-Wa,-mips32r2 -Wa,--trap
-platform-$(CONFIG_MACH_LOONGSON1) += loongson1/
-cflags-$(CONFIG_MACH_LOONGSON1) += -I$(srctree)/arch/mips/include/asm/mach-loongson1
+platform-$(CONFIG_MACH_LOONGSON32) += loongson32/
+cflags-$(CONFIG_MACH_LOONGSON32) += -I$(srctree)/arch/mips/include/asm/mach-loongson32
load-$(CONFIG_LOONGSON1_LS1B) += 0xffffffff80100000
diff --git a/arch/mips/loongson1/common/Makefile b/arch/mips/loongson32/common/Makefile
index 723b4ce..723b4ce 100644
--- a/arch/mips/loongson1/common/Makefile
+++ b/arch/mips/loongson32/common/Makefile
diff --git a/arch/mips/loongson1/common/irq.c b/arch/mips/loongson32/common/irq.c
index 455a770..455a770 100644
--- a/arch/mips/loongson1/common/irq.c
+++ b/arch/mips/loongson32/common/irq.c
diff --git a/arch/mips/loongson1/common/platform.c b/arch/mips/loongson32/common/platform.c
index ddf1d4c..ddf1d4c 100644
--- a/arch/mips/loongson1/common/platform.c
+++ b/arch/mips/loongson32/common/platform.c
diff --git a/arch/mips/loongson1/common/prom.c b/arch/mips/loongson32/common/prom.c
index 6860098..6860098 100644
--- a/arch/mips/loongson1/common/prom.c
+++ b/arch/mips/loongson32/common/prom.c
diff --git a/arch/mips/loongson1/common/reset.c b/arch/mips/loongson32/common/reset.c
index c41e4ca..c41e4ca 100644
--- a/arch/mips/loongson1/common/reset.c
+++ b/arch/mips/loongson32/common/reset.c
diff --git a/arch/mips/loongson1/common/setup.c b/arch/mips/loongson32/common/setup.c
index 62f41af..62f41af 100644
--- a/arch/mips/loongson1/common/setup.c
+++ b/arch/mips/loongson32/common/setup.c
diff --git a/arch/mips/loongson1/common/time.c b/arch/mips/loongson32/common/time.c
index df0f850..df0f850 100644
--- a/arch/mips/loongson1/common/time.c
+++ b/arch/mips/loongson32/common/time.c
diff --git a/arch/mips/loongson1/ls1b/Makefile b/arch/mips/loongson32/ls1b/Makefile
index 891eac4..891eac4 100644
--- a/arch/mips/loongson1/ls1b/Makefile
+++ b/arch/mips/loongson32/ls1b/Makefile
diff --git a/arch/mips/loongson1/ls1b/board.c b/arch/mips/loongson32/ls1b/board.c
index 58daeea..58daeea 100644
--- a/arch/mips/loongson1/ls1b/board.c
+++ b/arch/mips/loongson32/ls1b/board.c
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson64/Kconfig
index 156de85..497912b 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -1,4 +1,4 @@
-if MACH_LOONGSON
+if MACH_LOONGSON64
choice
prompt "Machine Type"
@@ -15,7 +15,7 @@ config LEMOTE_FULOONG2E
select HW_HAS_PCI
select I8259
select ISA
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -44,7 +44,7 @@ config LEMOTE_MACH2F
select HAVE_CLK
select HW_HAS_PCI
select I8259
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select ISA
select SYS_HAS_CPU_LOONGSON2F
select SYS_HAS_EARLY_PRINTK
@@ -73,7 +73,7 @@ config LOONGSON_MACH3X
select ISA
select HT_PCI
select I8259
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select NR_CPUS_DEFAULT_4
select SYS_HAS_CPU_LOONGSON3
select SYS_HAS_EARLY_PRINTK
@@ -155,4 +155,4 @@ config LOONGSON_MC146818
config LEFI_FIRMWARE_INTERFACE
bool
-endif # MACH_LOONGSON
+endif # MACH_LOONGSON64
diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson64/Makefile
index 7429994..4fe3d88 100644
--- a/arch/mips/loongson/Makefile
+++ b/arch/mips/loongson64/Makefile
@@ -2,7 +2,7 @@
# Common code for all Loongson based systems
#
-obj-$(CONFIG_MACH_LOONGSON) += common/
+obj-$(CONFIG_MACH_LOONGSON64) += common/
#
# Lemote Fuloong mini-PC (Loongson 2E-based)
diff --git a/arch/mips/loongson/Platform b/arch/mips/loongson64/Platform
index 0ac20eb..2e48e83 100644
--- a/arch/mips/loongson/Platform
+++ b/arch/mips/loongson64/Platform
@@ -26,8 +26,8 @@ endif
# Loongson Machines' Support
#
-platform-$(CONFIG_MACH_LOONGSON) += loongson/
-cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson -mno-branch-likely
+platform-$(CONFIG_MACH_LOONGSON64) += loongson64/
+cflags-$(CONFIG_MACH_LOONGSON64) += -I$(srctree)/arch/mips/include/asm/mach-loongson64 -mno-branch-likely
load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
load-$(CONFIG_LOONGSON_MACH3X) += 0xffffffff80200000
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson64/common/Makefile
index f2e8153..f2e8153 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson64/common/Makefile
diff --git a/arch/mips/loongson/common/bonito-irq.c b/arch/mips/loongson64/common/bonito-irq.c
index cc0e4fd..cc0e4fd 100644
--- a/arch/mips/loongson/common/bonito-irq.c
+++ b/arch/mips/loongson64/common/bonito-irq.c
diff --git a/arch/mips/loongson/common/cmdline.c b/arch/mips/loongson64/common/cmdline.c
index 72fed00..72fed00 100644
--- a/arch/mips/loongson/common/cmdline.c
+++ b/arch/mips/loongson64/common/cmdline.c
diff --git a/arch/mips/loongson/common/cs5536/Makefile b/arch/mips/loongson64/common/cs5536/Makefile
index f12e640..f12e640 100644
--- a/arch/mips/loongson/common/cs5536/Makefile
+++ b/arch/mips/loongson64/common/cs5536/Makefile
diff --git a/arch/mips/loongson/common/cs5536/cs5536_acc.c b/arch/mips/loongson64/common/cs5536/cs5536_acc.c
index ab4d6cc..ab4d6cc 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_acc.c
+++ b/arch/mips/loongson64/common/cs5536/cs5536_acc.c
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ehci.c b/arch/mips/loongson64/common/cs5536/cs5536_ehci.c
index ec2e360..ec2e360 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ehci.c
+++ b/arch/mips/loongson64/common/cs5536/cs5536_ehci.c
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ide.c b/arch/mips/loongson64/common/cs5536/cs5536_ide.c
index a73414d..a73414d 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ide.c
+++ b/arch/mips/loongson64/common/cs5536/cs5536_ide.c
diff --git a/arch/mips/loongson/common/cs5536/cs5536_isa.c b/arch/mips/loongson64/common/cs5536/cs5536_isa.c
index 924be39..924be39 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_isa.c
+++ b/arch/mips/loongson64/common/cs5536/cs5536_isa.c
diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c
index 12c75db..12c75db 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
+++ b/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ohci.c b/arch/mips/loongson64/common/cs5536/cs5536_ohci.c
index f7c905e..f7c905e 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ohci.c
+++ b/arch/mips/loongson64/common/cs5536/cs5536_ohci.c
diff --git a/arch/mips/loongson/common/cs5536/cs5536_pci.c b/arch/mips/loongson64/common/cs5536/cs5536_pci.c
index b739723..b739723 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_pci.c
+++ b/arch/mips/loongson64/common/cs5536/cs5536_pci.c
diff --git a/arch/mips/loongson/common/dma-swiotlb.c b/arch/mips/loongson64/common/dma-swiotlb.c
index 2c6b989..2c6b989 100644
--- a/arch/mips/loongson/common/dma-swiotlb.c
+++ b/arch/mips/loongson64/common/dma-swiotlb.c
diff --git a/arch/mips/loongson/common/early_printk.c b/arch/mips/loongson64/common/early_printk.c
index 6ca632e..6ca632e 100644
--- a/arch/mips/loongson/common/early_printk.c
+++ b/arch/mips/loongson64/common/early_printk.c
diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson64/common/env.c
index 22f04ca..22f04ca 100644
--- a/arch/mips/loongson/common/env.c
+++ b/arch/mips/loongson64/common/env.c
diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson64/common/init.c
index 9b987fe..9b987fe 100644
--- a/arch/mips/loongson/common/init.c
+++ b/arch/mips/loongson64/common/init.c
diff --git a/arch/mips/loongson/common/irq.c b/arch/mips/loongson64/common/irq.c
index 687003b..687003b 100644
--- a/arch/mips/loongson/common/irq.c
+++ b/arch/mips/loongson64/common/irq.c
diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson64/common/machtype.c
index f2807bc..f2807bc 100644
--- a/arch/mips/loongson/common/machtype.c
+++ b/arch/mips/loongson64/common/machtype.c
diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson64/common/mem.c
index b01d524..b01d524 100644
--- a/arch/mips/loongson/common/mem.c
+++ b/arch/mips/loongson64/common/mem.c
diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson64/common/pci.c
index 4e25756..4e25756 100644
--- a/arch/mips/loongson/common/pci.c
+++ b/arch/mips/loongson64/common/pci.c
diff --git a/arch/mips/loongson/common/platform.c b/arch/mips/loongson64/common/platform.c
index 0ed3832..0ed3832 100644
--- a/arch/mips/loongson/common/platform.c
+++ b/arch/mips/loongson64/common/platform.c
diff --git a/arch/mips/loongson/common/pm.c b/arch/mips/loongson64/common/pm.c
index a6b67cc..a6b67cc 100644
--- a/arch/mips/loongson/common/pm.c
+++ b/arch/mips/loongson64/common/pm.c
diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson64/common/reset.c
index a60715e..a60715e 100644
--- a/arch/mips/loongson/common/reset.c
+++ b/arch/mips/loongson64/common/reset.c
diff --git a/arch/mips/loongson/common/rtc.c b/arch/mips/loongson64/common/rtc.c
index b5709af..b5709af 100644
--- a/arch/mips/loongson/common/rtc.c
+++ b/arch/mips/loongson64/common/rtc.c
diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson64/common/serial.c
index c23fa13..ffefc1c 100644
--- a/arch/mips/loongson/common/serial.c
+++ b/arch/mips/loongson64/common/serial.c
@@ -11,7 +11,7 @@
*/
#include <linux/io.h>
-#include <linux/init.h>
+#include <linux/module.h>
#include <linux/serial_8250.h>
#include <asm/bootinfo.h>
@@ -108,5 +108,10 @@ static int __init serial_init(void)
return platform_device_register(&uart8250_device);
}
+module_init(serial_init);
-device_initcall(serial_init);
+static void __init serial_exit(void)
+{
+ platform_device_unregister(&uart8250_device);
+}
+module_exit(serial_exit);
diff --git a/arch/mips/loongson/common/setup.c b/arch/mips/loongson64/common/setup.c
index d477dd6..d477dd6 100644
--- a/arch/mips/loongson/common/setup.c
+++ b/arch/mips/loongson64/common/setup.c
diff --git a/arch/mips/loongson/common/time.c b/arch/mips/loongson64/common/time.c
index e1a5382a..e1a5382a 100644
--- a/arch/mips/loongson/common/time.c
+++ b/arch/mips/loongson64/common/time.c
diff --git a/arch/mips/loongson/common/uart_base.c b/arch/mips/loongson64/common/uart_base.c
index 9de559d..9de559d 100644
--- a/arch/mips/loongson/common/uart_base.c
+++ b/arch/mips/loongson64/common/uart_base.c
diff --git a/arch/mips/loongson/fuloong-2e/Makefile b/arch/mips/loongson64/fuloong-2e/Makefile
index b762272..b762272 100644
--- a/arch/mips/loongson/fuloong-2e/Makefile
+++ b/arch/mips/loongson64/fuloong-2e/Makefile
diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson64/fuloong-2e/irq.c
index ef5ec8f..ef5ec8f 100644
--- a/arch/mips/loongson/fuloong-2e/irq.c
+++ b/arch/mips/loongson64/fuloong-2e/irq.c
diff --git a/arch/mips/loongson/fuloong-2e/reset.c b/arch/mips/loongson64/fuloong-2e/reset.c
index da4d2ae..da4d2ae 100644
--- a/arch/mips/loongson/fuloong-2e/reset.c
+++ b/arch/mips/loongson64/fuloong-2e/reset.c
diff --git a/arch/mips/loongson/lemote-2f/Makefile b/arch/mips/loongson64/lemote-2f/Makefile
index 4f9eaa3..4f9eaa3 100644
--- a/arch/mips/loongson/lemote-2f/Makefile
+++ b/arch/mips/loongson64/lemote-2f/Makefile
diff --git a/arch/mips/loongson/lemote-2f/clock.c b/arch/mips/loongson64/lemote-2f/clock.c
index 462e34d..462e34d 100644
--- a/arch/mips/loongson/lemote-2f/clock.c
+++ b/arch/mips/loongson64/lemote-2f/clock.c
diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.c b/arch/mips/loongson64/lemote-2f/ec_kb3310b.c
index 2b666d3..2b666d3 100644
--- a/arch/mips/loongson/lemote-2f/ec_kb3310b.c
+++ b/arch/mips/loongson64/lemote-2f/ec_kb3310b.c
diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.h b/arch/mips/loongson64/lemote-2f/ec_kb3310b.h
index 5a3f186..5a3f186 100644
--- a/arch/mips/loongson/lemote-2f/ec_kb3310b.h
+++ b/arch/mips/loongson64/lemote-2f/ec_kb3310b.h
diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson64/lemote-2f/irq.c
index cab5f43..cab5f43 100644
--- a/arch/mips/loongson/lemote-2f/irq.c
+++ b/arch/mips/loongson64/lemote-2f/irq.c
diff --git a/arch/mips/loongson/lemote-2f/machtype.c b/arch/mips/loongson64/lemote-2f/machtype.c
index b55e6ee..b55e6ee 100644
--- a/arch/mips/loongson/lemote-2f/machtype.c
+++ b/arch/mips/loongson64/lemote-2f/machtype.c
diff --git a/arch/mips/loongson/lemote-2f/pm.c b/arch/mips/loongson64/lemote-2f/pm.c
index cac4d38..cac4d38 100644
--- a/arch/mips/loongson/lemote-2f/pm.c
+++ b/arch/mips/loongson64/lemote-2f/pm.c
diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson64/lemote-2f/reset.c
index a26ca7f..a26ca7f 100644
--- a/arch/mips/loongson/lemote-2f/reset.c
+++ b/arch/mips/loongson64/lemote-2f/reset.c
diff --git a/arch/mips/loongson/loongson-3/Makefile b/arch/mips/loongson64/loongson-3/Makefile
index 622fead..622fead 100644
--- a/arch/mips/loongson/loongson-3/Makefile
+++ b/arch/mips/loongson64/loongson-3/Makefile
diff --git a/arch/mips/loongson/loongson-3/cop2-ex.c b/arch/mips/loongson64/loongson-3/cop2-ex.c
index ea13764..ea13764 100644
--- a/arch/mips/loongson/loongson-3/cop2-ex.c
+++ b/arch/mips/loongson64/loongson-3/cop2-ex.c
diff --git a/arch/mips/loongson/loongson-3/hpet.c b/arch/mips/loongson64/loongson-3/hpet.c
index 5c21cd3..5c21cd3 100644
--- a/arch/mips/loongson/loongson-3/hpet.c
+++ b/arch/mips/loongson64/loongson-3/hpet.c
diff --git a/arch/mips/loongson/loongson-3/irq.c b/arch/mips/loongson64/loongson-3/irq.c
index 0f75b6b..0f75b6b 100644
--- a/arch/mips/loongson/loongson-3/irq.c
+++ b/arch/mips/loongson64/loongson-3/irq.c
diff --git a/arch/mips/loongson/loongson-3/numa.c b/arch/mips/loongson64/loongson-3/numa.c
index 12d14ed..12d14ed 100644
--- a/arch/mips/loongson/loongson-3/numa.c
+++ b/arch/mips/loongson64/loongson-3/numa.c
diff --git a/arch/mips/loongson/loongson-3/platform.c b/arch/mips/loongson64/loongson-3/platform.c
index 25a97cc..25a97cc 100644
--- a/arch/mips/loongson/loongson-3/platform.c
+++ b/arch/mips/loongson64/loongson-3/platform.c
diff --git a/arch/mips/loongson/loongson-3/smp.c b/arch/mips/loongson64/loongson-3/smp.c
index 509877c..509877c 100644
--- a/arch/mips/loongson/loongson-3/smp.c
+++ b/arch/mips/loongson64/loongson-3/smp.c
diff --git a/arch/mips/loongson/loongson-3/smp.h b/arch/mips/loongson64/loongson-3/smp.h
index d98ff65..d98ff65 100644
--- a/arch/mips/loongson/loongson-3/smp.h
+++ b/arch/mips/loongson64/loongson-3/smp.h
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 2e03ab1..7f660dc 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -295,7 +295,7 @@ static void r4k_blast_icache_page_setup(void)
static void (*r4k_blast_icache_user_page)(unsigned long addr);
-static void __cpuinit r4k_blast_icache_user_page_setup(void)
+static void r4k_blast_icache_user_page_setup(void)
{
unsigned long ic_lsize = cpu_icache_line_size();
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index 8d909db..596e184 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -28,8 +28,6 @@ static unsigned long icache_size, dcache_size; /* Size in bytes */
#include <asm/r4kcache.h>
-extern int r3k_have_wired_reg; /* in r3k-tlb.c */
-
/* This sequence is required to ensure icache is disabled immediately */
#define TX39_STOP_STREAMING() \
__asm__ __volatile__( \
@@ -383,8 +381,6 @@ void tx39_cache_init(void)
case CPU_TX3927:
default:
/* TX39/H2,H3 core (writeback 2way-set-associative cache) */
- r3k_have_wired_reg = 1;
- write_c0_wired(0); /* set 8 on reset... */
/* board-dependent init code may set WBON */
__flush_cache_vmap = tx39__flush_cache_vmap;
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 609d124..eeaf024 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -262,12 +262,13 @@ static void mips_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
plat_unmap_dma_mem(dev, dma_addr, size, direction);
}
-static int mips_dma_map_sg(struct device *dev, struct scatterlist *sg,
+static int mips_dma_map_sg(struct device *dev, struct scatterlist *sglist,
int nents, enum dma_data_direction direction, struct dma_attrs *attrs)
{
int i;
+ struct scatterlist *sg;
- for (i = 0; i < nents; i++, sg++) {
+ for_each_sg(sglist, sg, nents, i) {
if (!plat_device_is_coherent(dev))
__dma_sync(sg_page(sg), sg->offset, sg->length,
direction);
@@ -291,13 +292,14 @@ static dma_addr_t mips_dma_map_page(struct device *dev, struct page *page,
return plat_map_dma_mem_page(dev, page) + offset;
}
-static void mips_dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+static void mips_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
int nhwentries, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
int i;
+ struct scatterlist *sg;
- for (i = 0; i < nhwentries; i++, sg++) {
+ for_each_sg(sglist, sg, nhwentries, i) {
if (!plat_device_is_coherent(dev) &&
direction != DMA_TO_DEVICE)
__dma_sync(sg_page(sg), sg->offset, sg->length,
@@ -324,26 +326,34 @@ static void mips_dma_sync_single_for_device(struct device *dev,
}
static void mips_dma_sync_sg_for_cpu(struct device *dev,
- struct scatterlist *sg, int nelems, enum dma_data_direction direction)
+ struct scatterlist *sglist, int nelems,
+ enum dma_data_direction direction)
{
int i;
+ struct scatterlist *sg;
- if (cpu_needs_post_dma_flush(dev))
- for (i = 0; i < nelems; i++, sg++)
+ if (cpu_needs_post_dma_flush(dev)) {
+ for_each_sg(sglist, sg, nelems, i) {
__dma_sync(sg_page(sg), sg->offset, sg->length,
direction);
+ }
+ }
plat_post_dma_flush(dev);
}
static void mips_dma_sync_sg_for_device(struct device *dev,
- struct scatterlist *sg, int nelems, enum dma_data_direction direction)
+ struct scatterlist *sglist, int nelems,
+ enum dma_data_direction direction)
{
int i;
+ struct scatterlist *sg;
- if (!plat_device_is_coherent(dev))
- for (i = 0; i < nelems; i++, sg++)
+ if (!plat_device_is_coherent(dev)) {
+ for_each_sg(sglist, sg, nelems, i) {
__dma_sync(sg_page(sg), sg->offset, sg->length,
direction);
+ }
+ }
}
int mips_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index 4094bbd..2b75b8f 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -36,30 +36,33 @@ extern void build_tlb_refill_handler(void);
"nop\n\t" \
".set pop\n\t")
-int r3k_have_wired_reg; /* should be in cpu_data? */
+static int r3k_have_wired_reg; /* Should be in cpu_data? */
/* TLB operations. */
-void local_flush_tlb_all(void)
+static void local_flush_tlb_from(int entry)
{
- unsigned long flags;
unsigned long old_ctx;
- int entry;
-
-#ifdef DEBUG_TLB
- printk("[tlball]");
-#endif
- local_irq_save(flags);
old_ctx = read_c0_entryhi() & ASID_MASK;
write_c0_entrylo0(0);
- entry = r3k_have_wired_reg ? read_c0_wired() : 8;
- for (; entry < current_cpu_data.tlbsize; entry++) {
+ while (entry < current_cpu_data.tlbsize) {
write_c0_index(entry << 8);
write_c0_entryhi((entry | 0x80000) << 12);
- BARRIER;
+ entry++; /* BARRIER */
tlb_write_indexed();
}
write_c0_entryhi(old_ctx);
+}
+
+void local_flush_tlb_all(void)
+{
+ unsigned long flags;
+
+#ifdef DEBUG_TLB
+ printk("[tlball]");
+#endif
+ local_irq_save(flags);
+ local_flush_tlb_from(r3k_have_wired_reg ? read_c0_wired() : 8);
local_irq_restore(flags);
}
@@ -277,7 +280,13 @@ void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
void tlb_init(void)
{
- local_flush_tlb_all();
-
+ switch (current_cpu_type()) {
+ case CPU_TX3922:
+ case CPU_TX3927:
+ r3k_have_wired_reg = 1;
+ write_c0_wired(0); /* Set to 8 on reset... */
+ break;
+ }
+ local_flush_tlb_from(0);
build_tlb_refill_handler();
}
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 08318ec..5037d58 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -423,7 +423,7 @@ int __init has_transparent_hugepage(void)
* lifetime of the system
*/
-int temp_tlb_entry __cpuinitdata;
+int temp_tlb_entry;
__init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
unsigned long entryhi, unsigned long pagemask)
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 97c8702..323d1d3 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -35,7 +35,7 @@
#include <asm/uasm.h>
#include <asm/setup.h>
-static int __cpuinitdata mips_xpa_disabled;
+static int mips_xpa_disabled;
static int __init xpa_disable(char *s)
{
@@ -1608,23 +1608,32 @@ build_pte_present(u32 **p, struct uasm_reloc **r,
int pte, int ptr, int scratch, enum label_id lid)
{
int t = scratch >= 0 ? scratch : pte;
+ int cur = pte;
if (cpu_has_rixi) {
if (use_bbit_insns()) {
uasm_il_bbit0(p, r, pte, ilog2(_PAGE_PRESENT), lid);
uasm_i_nop(p);
} else {
- uasm_i_srl(p, t, pte, _PAGE_PRESENT_SHIFT);
- uasm_i_andi(p, t, t, 1);
+ if (_PAGE_PRESENT_SHIFT) {
+ uasm_i_srl(p, t, cur, _PAGE_PRESENT_SHIFT);
+ cur = t;
+ }
+ uasm_i_andi(p, t, cur, 1);
uasm_il_beqz(p, r, t, lid);
if (pte == t)
/* You lose the SMP race :-(*/
iPTE_LW(p, pte, ptr);
}
} else {
- uasm_i_srl(p, t, pte, _PAGE_PRESENT_SHIFT);
- uasm_i_andi(p, t, t, 3);
- uasm_i_xori(p, t, t, 3);
+ if (_PAGE_PRESENT_SHIFT) {
+ uasm_i_srl(p, t, cur, _PAGE_PRESENT_SHIFT);
+ cur = t;
+ }
+ uasm_i_andi(p, t, cur,
+ (_PAGE_PRESENT | _PAGE_READ) >> _PAGE_PRESENT_SHIFT);
+ uasm_i_xori(p, t, t,
+ (_PAGE_PRESENT | _PAGE_READ) >> _PAGE_PRESENT_SHIFT);
uasm_il_bnez(p, r, t, lid);
if (pte == t)
/* You lose the SMP race :-(*/
@@ -1652,10 +1661,16 @@ build_pte_writable(u32 **p, struct uasm_reloc **r,
enum label_id lid)
{
int t = scratch >= 0 ? scratch : pte;
+ int cur = pte;
- uasm_i_srl(p, t, pte, _PAGE_PRESENT_SHIFT);
- uasm_i_andi(p, t, t, 5);
- uasm_i_xori(p, t, t, 5);
+ if (_PAGE_PRESENT_SHIFT) {
+ uasm_i_srl(p, t, cur, _PAGE_PRESENT_SHIFT);
+ cur = t;
+ }
+ uasm_i_andi(p, t, cur,
+ (_PAGE_PRESENT | _PAGE_WRITE) >> _PAGE_PRESENT_SHIFT);
+ uasm_i_xori(p, t, t,
+ (_PAGE_PRESENT | _PAGE_WRITE) >> _PAGE_PRESENT_SHIFT);
uasm_il_bnez(p, r, t, lid);
if (pte == t)
/* You lose the SMP race :-(*/
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index 6510ace..ea35587 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -5,7 +5,7 @@
# Copyright (C) 2008 Wind River Systems, Inc.
# written by Ralf Baechle <ralf@linux-mips.org>
#
-obj-y := malta-display.o malta-init.o \
+obj-y := malta-display.o malta-dt.o malta-init.o \
malta-int.o malta-memory.o malta-platform.o \
malta-reset.o malta-setup.o malta-time.o
diff --git a/arch/mips/mti-malta/malta-dt.c b/arch/mips/mti-malta/malta-dt.c
new file mode 100644
index 0000000..47a2288
--- /dev/null
+++ b/arch/mips/mti-malta/malta-dt.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+void __init device_tree_init(void)
+{
+ unflatten_and_copy_device_tree();
+}
+
+static const struct of_device_id bus_ids[] __initconst = {
+ { .compatible = "simple-bus", },
+ { .compatible = "isa", },
+ {},
+};
+
+static int __init publish_devices(void)
+{
+ if (!of_have_populated_dt())
+ return 0;
+
+ return of_platform_bus_probe(NULL, bus_ids, NULL);
+}
+device_initcall(publish_devices);
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index db7c9e5..9d1e7f5 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -21,6 +21,7 @@
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/irq.h>
+#include <linux/of_fdt.h>
#include <linux/pci.h>
#include <linux/screen_info.h>
#include <linux/time.h>
@@ -31,6 +32,7 @@
#include <asm/mips-boards/malta.h>
#include <asm/mips-boards/maltaint.h>
#include <asm/dma.h>
+#include <asm/prom.h>
#include <asm/traps.h>
#ifdef CONFIG_VT
#include <linux/console.h>
@@ -249,6 +251,8 @@ void __init plat_mem_setup(void)
{
unsigned int i;
+ __dt_setup_arch(__dtb_start);
+
if (config_enabled(CONFIG_EVA))
/* EVA has already been configured in mach-malta/kernel-init.h */
pr_info("Enhanced Virtual Addressing (EVA) activated\n");
diff --git a/arch/mips/net/Makefile b/arch/mips/net/Makefile
index ae74b3a..8c27714 100644
--- a/arch/mips/net/Makefile
+++ b/arch/mips/net/Makefile
@@ -1,3 +1,3 @@
# MIPS networking code
-obj-$(CONFIG_BPF_JIT) += bpf_jit.o
+obj-$(CONFIG_BPF_JIT) += bpf_jit.o bpf_jit_asm.o
diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c
index e23fdf2..0c4a133 100644
--- a/arch/mips/net/bpf_jit.c
+++ b/arch/mips/net/bpf_jit.c
@@ -20,6 +20,7 @@
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/types.h>
+#include <asm/asm.h>
#include <asm/bitops.h>
#include <asm/cacheflush.h>
#include <asm/cpu-features.h>
@@ -28,14 +29,14 @@
#include "bpf_jit.h"
/* ABI
- *
- * s0 1st scratch register
- * s1 2nd scratch register
- * s2 offset register
- * s3 BPF register A
- * s4 BPF register X
- * s5 *skb
- * s6 *scratch memory
+ * r_skb_hl SKB header length
+ * r_data SKB data pointer
+ * r_off Offset
+ * r_A BPF register A
+ * r_X BPF register X
+ * r_skb *skb
+ * r_M *scratch memory
+ * r_skb_len SKB length
*
* On entry (*bpf_func)(*skb, *filter)
* a0 = MIPS_R_A0 = skb;
@@ -63,44 +64,8 @@
* ----------------------------------------------------
*/
-#define RSIZE (sizeof(unsigned long))
#define ptr typeof(unsigned long)
-/* ABI specific return values */
-#ifdef CONFIG_32BIT /* O32 */
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define r_err MIPS_R_V1
-#define r_val MIPS_R_V0
-#else /* CONFIG_CPU_LITTLE_ENDIAN */
-#define r_err MIPS_R_V0
-#define r_val MIPS_R_V1
-#endif
-#else /* N64 */
-#define r_err MIPS_R_V0
-#define r_val MIPS_R_V0
-#endif
-
-#define r_ret MIPS_R_V0
-
-/*
- * Use 2 scratch registers to avoid pipeline interlocks.
- * There is no overhead during epilogue and prologue since
- * any of the $s0-$s6 registers will only be preserved if
- * they are going to actually be used.
- */
-#define r_s0 MIPS_R_S0 /* scratch reg 1 */
-#define r_s1 MIPS_R_S1 /* scratch reg 2 */
-#define r_off MIPS_R_S2
-#define r_A MIPS_R_S3
-#define r_X MIPS_R_S4
-#define r_skb MIPS_R_S5
-#define r_M MIPS_R_S6
-#define r_tmp_imm MIPS_R_T6 /* No need to preserve this */
-#define r_tmp MIPS_R_T7 /* No need to preserve this */
-#define r_zero MIPS_R_ZERO
-#define r_sp MIPS_R_SP
-#define r_ra MIPS_R_RA
-
#define SCRATCH_OFF(k) (4 * (k))
/* JIT flags */
@@ -108,13 +73,13 @@
#define SEEN_SREG_SFT (BPF_MEMWORDS + 1)
#define SEEN_SREG_BASE (1 << SEEN_SREG_SFT)
#define SEEN_SREG(x) (SEEN_SREG_BASE << (x))
-#define SEEN_S0 SEEN_SREG(0)
-#define SEEN_S1 SEEN_SREG(1)
#define SEEN_OFF SEEN_SREG(2)
#define SEEN_A SEEN_SREG(3)
#define SEEN_X SEEN_SREG(4)
#define SEEN_SKB SEEN_SREG(5)
#define SEEN_MEM SEEN_SREG(6)
+/* SEEN_SK_DATA also implies skb_hl an skb_len */
+#define SEEN_SKB_DATA (SEEN_SREG(7) | SEEN_SREG(1) | SEEN_SREG(0))
/* Arguments used by JIT */
#define ARGS_USED_BY_JIT 2 /* only applicable to 64-bit */
@@ -577,27 +542,13 @@ static void save_bpf_jit_regs(struct jit_ctx *ctx, unsigned offset)
/* Adjust the stack pointer */
emit_stack_offset(-align_sp(offset), ctx);
- if (ctx->flags & SEEN_CALL) {
- /* Argument save area */
- if (config_enabled(CONFIG_64BIT))
- /* Bottom of current frame */
- real_off = align_sp(offset) - RSIZE;
- else
- /* Top of previous frame */
- real_off = align_sp(offset) + RSIZE;
- emit_store_stack_reg(MIPS_R_A0, r_sp, real_off, ctx);
- emit_store_stack_reg(MIPS_R_A1, r_sp, real_off + RSIZE, ctx);
-
- real_off = 0;
- }
-
tmp_flags = sflags = ctx->flags >> SEEN_SREG_SFT;
/* sflags is essentially a bitmap */
while (tmp_flags) {
if ((sflags >> i) & 0x1) {
emit_store_stack_reg(MIPS_R_S0 + i, r_sp, real_off,
ctx);
- real_off += RSIZE;
+ real_off += SZREG;
}
i++;
tmp_flags >>= 1;
@@ -606,13 +557,13 @@ static void save_bpf_jit_regs(struct jit_ctx *ctx, unsigned offset)
/* save return address */
if (ctx->flags & SEEN_CALL) {
emit_store_stack_reg(r_ra, r_sp, real_off, ctx);
- real_off += RSIZE;
+ real_off += SZREG;
}
/* Setup r_M leaving the alignment gap if necessary */
if (ctx->flags & SEEN_MEM) {
- if (real_off % (RSIZE * 2))
- real_off += RSIZE;
+ if (real_off % (SZREG * 2))
+ real_off += SZREG;
emit_long_instr(ctx, ADDIU, r_M, r_sp, real_off);
}
}
@@ -623,19 +574,6 @@ static void restore_bpf_jit_regs(struct jit_ctx *ctx,
int i, real_off = 0;
u32 sflags, tmp_flags;
- if (ctx->flags & SEEN_CALL) {
- if (config_enabled(CONFIG_64BIT))
- /* Bottom of current frame */
- real_off = align_sp(offset) - RSIZE;
- else
- /* Top of previous frame */
- real_off = align_sp(offset) + RSIZE;
- emit_load_stack_reg(MIPS_R_A0, r_sp, real_off, ctx);
- emit_load_stack_reg(MIPS_R_A1, r_sp, real_off + RSIZE, ctx);
-
- real_off = 0;
- }
-
tmp_flags = sflags = ctx->flags >> SEEN_SREG_SFT;
/* sflags is a bitmap */
i = 0;
@@ -643,7 +581,7 @@ static void restore_bpf_jit_regs(struct jit_ctx *ctx,
if ((sflags >> i) & 0x1) {
emit_load_stack_reg(MIPS_R_S0 + i, r_sp, real_off,
ctx);
- real_off += RSIZE;
+ real_off += SZREG;
}
i++;
tmp_flags >>= 1;
@@ -663,23 +601,13 @@ static unsigned int get_stack_depth(struct jit_ctx *ctx)
/* How may s* regs do we need to preserved? */
- sp_off += hweight32(ctx->flags >> SEEN_SREG_SFT) * RSIZE;
+ sp_off += hweight32(ctx->flags >> SEEN_SREG_SFT) * SZREG;
if (ctx->flags & SEEN_MEM)
sp_off += 4 * BPF_MEMWORDS; /* BPF_MEMWORDS are 32-bit */
if (ctx->flags & SEEN_CALL)
- /*
- * The JIT code make calls to external functions using 2
- * arguments. Therefore, for o32 we don't need to allocate
- * space because we don't care if the argumetns are lost
- * across calls. We do need however to preserve incoming
- * arguments but the space is already allocated for us by
- * the caller. On the other hand, for n64, we need to allocate
- * this space ourselves. We need to preserve $ra as well.
- */
- sp_off += config_enabled(CONFIG_64BIT) ?
- (ARGS_USED_BY_JIT + 1) * RSIZE : RSIZE;
+ sp_off += SZREG; /* Space for our ra register */
return sp_off;
}
@@ -696,6 +624,19 @@ static void build_prologue(struct jit_ctx *ctx)
if (ctx->flags & SEEN_SKB)
emit_reg_move(r_skb, MIPS_R_A0, ctx);
+ if (ctx->flags & SEEN_SKB_DATA) {
+ /* Load packet length */
+ emit_load(r_skb_len, r_skb, offsetof(struct sk_buff, len),
+ ctx);
+ emit_load(r_tmp, r_skb, offsetof(struct sk_buff, data_len),
+ ctx);
+ /* Load the data pointer */
+ emit_load_ptr(r_skb_data, r_skb,
+ offsetof(struct sk_buff, data), ctx);
+ /* Load the header length */
+ emit_subu(r_skb_hl, r_skb_len, r_tmp, ctx);
+ }
+
if (ctx->flags & SEEN_X)
emit_jit_reg_move(r_X, r_zero, ctx);
@@ -718,43 +659,17 @@ static void build_epilogue(struct jit_ctx *ctx)
emit_nop(ctx);
}
-static u64 jit_get_skb_b(struct sk_buff *skb, unsigned offset)
-{
- u8 ret;
- int err;
-
- err = skb_copy_bits(skb, offset, &ret, 1);
-
- return (u64)err << 32 | ret;
-}
-
-static u64 jit_get_skb_h(struct sk_buff *skb, unsigned offset)
-{
- u16 ret;
- int err;
-
- err = skb_copy_bits(skb, offset, &ret, 2);
-
- return (u64)err << 32 | ntohs(ret);
-}
-
-static u64 jit_get_skb_w(struct sk_buff *skb, unsigned offset)
-{
- u32 ret;
- int err;
-
- err = skb_copy_bits(skb, offset, &ret, 4);
-
- return (u64)err << 32 | ntohl(ret);
-}
+#define CHOOSE_LOAD_FUNC(K, func) \
+ ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative : func) : \
+ func##_positive)
static int build_body(struct jit_ctx *ctx)
{
- void *load_func[] = {jit_get_skb_b, jit_get_skb_h, jit_get_skb_w};
const struct bpf_prog *prog = ctx->skf;
const struct sock_filter *inst;
- unsigned int i, off, load_order, condt;
+ unsigned int i, off, condt;
u32 k, b_off __maybe_unused;
+ u8 (*sk_load_func)(unsigned long *skb, int offset);
for (i = 0; i < prog->len; i++) {
u16 code;
@@ -788,71 +703,46 @@ static int build_body(struct jit_ctx *ctx)
break;
case BPF_LD | BPF_W | BPF_ABS:
/* A <- P[k:4] */
- load_order = 2;
+ sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_word);
goto load;
case BPF_LD | BPF_H | BPF_ABS:
/* A <- P[k:2] */
- load_order = 1;
+ sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_half);
goto load;
case BPF_LD | BPF_B | BPF_ABS:
/* A <- P[k:1] */
- load_order = 0;
+ sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_byte);
load:
- /* the interpreter will deal with the negative K */
- if ((int)k < 0)
- return -ENOTSUPP;
-
emit_load_imm(r_off, k, ctx);
load_common:
- /*
- * We may got here from the indirect loads so
- * return if offset is negative.
- */
- emit_slt(r_s0, r_off, r_zero, ctx);
- emit_bcond(MIPS_COND_NE, r_s0, r_zero,
- b_imm(prog->len, ctx), ctx);
- emit_reg_move(r_ret, r_zero, ctx);
-
- ctx->flags |= SEEN_CALL | SEEN_OFF | SEEN_S0 |
- SEEN_SKB | SEEN_A;
+ ctx->flags |= SEEN_CALL | SEEN_OFF |
+ SEEN_SKB | SEEN_A | SEEN_SKB_DATA;
- emit_load_func(r_s0, (ptr)load_func[load_order],
- ctx);
+ emit_load_func(r_s0, (ptr)sk_load_func, ctx);
emit_reg_move(MIPS_R_A0, r_skb, ctx);
emit_jalr(MIPS_R_RA, r_s0, ctx);
/* Load second argument to delay slot */
emit_reg_move(MIPS_R_A1, r_off, ctx);
/* Check the error value */
- if (config_enabled(CONFIG_64BIT)) {
- /* Get error code from the top 32-bits */
- emit_dsrl32(r_s0, r_val, 0, ctx);
- /* Branch to 3 instructions ahead */
- emit_bcond(MIPS_COND_NE, r_s0, r_zero, 3 << 2,
- ctx);
- } else {
- /* Branch to 3 instructions ahead */
- emit_bcond(MIPS_COND_NE, r_err, r_zero, 3 << 2,
- ctx);
- }
- emit_nop(ctx);
- /* We are good */
- emit_b(b_imm(i + 1, ctx), ctx);
- emit_jit_reg_move(r_A, r_val, ctx);
+ emit_bcond(MIPS_COND_EQ, r_ret, 0, b_imm(i + 1, ctx),
+ ctx);
+ /* Load return register on DS for failures */
+ emit_reg_move(r_ret, r_zero, ctx);
/* Return with error */
emit_b(b_imm(prog->len, ctx), ctx);
- emit_reg_move(r_ret, r_zero, ctx);
+ emit_nop(ctx);
break;
case BPF_LD | BPF_W | BPF_IND:
/* A <- P[X + k:4] */
- load_order = 2;
+ sk_load_func = sk_load_word;
goto load_ind;
case BPF_LD | BPF_H | BPF_IND:
/* A <- P[X + k:2] */
- load_order = 1;
+ sk_load_func = sk_load_half;
goto load_ind;
case BPF_LD | BPF_B | BPF_IND:
/* A <- P[X + k:1] */
- load_order = 0;
+ sk_load_func = sk_load_byte;
load_ind:
ctx->flags |= SEEN_OFF | SEEN_X;
emit_addiu(r_off, r_X, k, ctx);
@@ -874,14 +764,10 @@ load_ind:
emit_load(r_X, r_skb, off, ctx);
break;
case BPF_LDX | BPF_B | BPF_MSH:
- /* the interpreter will deal with the negative K */
- if ((int)k < 0)
- return -ENOTSUPP;
-
/* X <- 4 * (P[k:1] & 0xf) */
- ctx->flags |= SEEN_X | SEEN_CALL | SEEN_S0 | SEEN_SKB;
+ ctx->flags |= SEEN_X | SEEN_CALL | SEEN_SKB;
/* Load offset to a1 */
- emit_load_func(r_s0, (ptr)jit_get_skb_b, ctx);
+ emit_load_func(r_s0, (ptr)sk_load_byte, ctx);
/*
* This may emit two instructions so it may not fit
* in the delay slot. So use a0 in the delay slot.
@@ -890,25 +776,15 @@ load_ind:
emit_jalr(MIPS_R_RA, r_s0, ctx);
emit_reg_move(MIPS_R_A0, r_skb, ctx); /* delay slot */
/* Check the error value */
- if (config_enabled(CONFIG_64BIT)) {
- /* Top 32-bits of $v0 on 64-bit */
- emit_dsrl32(r_s0, r_val, 0, ctx);
- emit_bcond(MIPS_COND_NE, r_s0, r_zero,
- 3 << 2, ctx);
- } else {
- emit_bcond(MIPS_COND_NE, r_err, r_zero,
- 3 << 2, ctx);
- }
- /* No need for delay slot */
+ emit_bcond(MIPS_COND_NE, r_ret, 0,
+ b_imm(prog->len, ctx), ctx);
+ emit_reg_move(r_ret, r_zero, ctx);
/* We are good */
/* X <- P[1:K] & 0xf */
- emit_andi(r_X, r_val, 0xf, ctx);
+ emit_andi(r_X, r_A, 0xf, ctx);
/* X << 2 */
emit_b(b_imm(i + 1, ctx), ctx);
emit_sll(r_X, r_X, 2, ctx); /* delay slot */
- /* Return with error */
- emit_b(b_imm(prog->len, ctx), ctx);
- emit_load_imm(r_ret, 0, ctx); /* delay slot */
break;
case BPF_ST:
/* M[k] <- A */
@@ -943,7 +819,7 @@ load_ind:
case BPF_ALU | BPF_MUL | BPF_K:
/* A *= K */
/* Load K to scratch register before MUL */
- ctx->flags |= SEEN_A | SEEN_S0;
+ ctx->flags |= SEEN_A;
emit_load_imm(r_s0, k, ctx);
emit_mul(r_A, r_A, r_s0, ctx);
break;
@@ -961,7 +837,7 @@ load_ind:
emit_srl(r_A, r_A, k, ctx);
break;
}
- ctx->flags |= SEEN_A | SEEN_S0;
+ ctx->flags |= SEEN_A;
emit_load_imm(r_s0, k, ctx);
emit_div(r_A, r_s0, ctx);
break;
@@ -971,7 +847,7 @@ load_ind:
ctx->flags |= SEEN_A;
emit_jit_reg_move(r_A, r_zero, ctx);
} else {
- ctx->flags |= SEEN_A | SEEN_S0;
+ ctx->flags |= SEEN_A;
emit_load_imm(r_s0, k, ctx);
emit_mod(r_A, r_s0, ctx);
}
@@ -982,7 +858,7 @@ load_ind:
/* Check if r_X is zero */
emit_bcond(MIPS_COND_EQ, r_X, r_zero,
b_imm(prog->len, ctx), ctx);
- emit_load_imm(r_val, 0, ctx); /* delay slot */
+ emit_load_imm(r_ret, 0, ctx); /* delay slot */
emit_div(r_A, r_X, ctx);
break;
case BPF_ALU | BPF_MOD | BPF_X:
@@ -991,7 +867,7 @@ load_ind:
/* Check if r_X is zero */
emit_bcond(MIPS_COND_EQ, r_X, r_zero,
b_imm(prog->len, ctx), ctx);
- emit_load_imm(r_val, 0, ctx); /* delay slot */
+ emit_load_imm(r_ret, 0, ctx); /* delay slot */
emit_mod(r_A, r_X, ctx);
break;
case BPF_ALU | BPF_OR | BPF_K:
@@ -1085,10 +961,10 @@ jmp_cmp:
if ((condt & MIPS_COND_GE) ||
(condt & MIPS_COND_GT)) {
if (condt & MIPS_COND_K) { /* K */
- ctx->flags |= SEEN_S0 | SEEN_A;
+ ctx->flags |= SEEN_A;
emit_sltiu(r_s0, r_A, k, ctx);
} else { /* X */
- ctx->flags |= SEEN_S0 | SEEN_A |
+ ctx->flags |= SEEN_A |
SEEN_X;
emit_sltu(r_s0, r_A, r_X, ctx);
}
@@ -1100,7 +976,7 @@ jmp_cmp:
/* A > (K|X) ? scratch = 0 */
if (condt & MIPS_COND_GT) {
/* Checking for equality */
- ctx->flags |= SEEN_S0 | SEEN_A | SEEN_X;
+ ctx->flags |= SEEN_A | SEEN_X;
if (condt & MIPS_COND_K)
emit_load_imm(r_s0, k, ctx);
else
@@ -1123,7 +999,7 @@ jmp_cmp:
} else {
/* A == K|X */
if (condt & MIPS_COND_K) { /* K */
- ctx->flags |= SEEN_S0 | SEEN_A;
+ ctx->flags |= SEEN_A;
emit_load_imm(r_s0, k, ctx);
/* jump true */
b_off = b_imm(i + inst->jt + 1, ctx);
@@ -1153,7 +1029,7 @@ jmp_cmp:
}
break;
case BPF_JMP | BPF_JSET | BPF_K:
- ctx->flags |= SEEN_S0 | SEEN_S1 | SEEN_A;
+ ctx->flags |= SEEN_A;
/* pc += (A & K) ? pc -> jt : pc -> jf */
emit_load_imm(r_s1, k, ctx);
emit_and(r_s0, r_A, r_s1, ctx);
@@ -1167,7 +1043,7 @@ jmp_cmp:
emit_nop(ctx);
break;
case BPF_JMP | BPF_JSET | BPF_X:
- ctx->flags |= SEEN_S0 | SEEN_X | SEEN_A;
+ ctx->flags |= SEEN_X | SEEN_A;
/* pc += (A & X) ? pc -> jt : pc -> jf */
emit_and(r_s0, r_A, r_X, ctx);
/* jump true */
@@ -1251,7 +1127,7 @@ jmp_cmp:
break;
case BPF_ANC | SKF_AD_IFINDEX:
/* A = skb->dev->ifindex */
- ctx->flags |= SEEN_SKB | SEEN_A | SEEN_S0;
+ ctx->flags |= SEEN_SKB | SEEN_A;
off = offsetof(struct sk_buff, dev);
/* Load *dev pointer */
emit_load_ptr(r_s0, r_skb, off, ctx);
@@ -1278,7 +1154,7 @@ jmp_cmp:
break;
case BPF_ANC | SKF_AD_VLAN_TAG:
case BPF_ANC | SKF_AD_VLAN_TAG_PRESENT:
- ctx->flags |= SEEN_SKB | SEEN_S0 | SEEN_A;
+ ctx->flags |= SEEN_SKB | SEEN_A;
BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
vlan_tci) != 2);
off = offsetof(struct sk_buff, vlan_tci);
diff --git a/arch/mips/net/bpf_jit.h b/arch/mips/net/bpf_jit.h
index 3a5751b..8f9f548 100644
--- a/arch/mips/net/bpf_jit.h
+++ b/arch/mips/net/bpf_jit.h
@@ -15,9 +15,10 @@
/* Registers used by JIT */
#define MIPS_R_ZERO 0
#define MIPS_R_V0 2
-#define MIPS_R_V1 3
#define MIPS_R_A0 4
#define MIPS_R_A1 5
+#define MIPS_R_T4 12
+#define MIPS_R_T5 13
#define MIPS_R_T6 14
#define MIPS_R_T7 15
#define MIPS_R_S0 16
@@ -41,4 +42,43 @@
#define MIPS_COND_X (0x1 << 5)
#define MIPS_COND_K (0x1 << 6)
+#define r_ret MIPS_R_V0
+
+/*
+ * Use 2 scratch registers to avoid pipeline interlocks.
+ * There is no overhead during epilogue and prologue since
+ * any of the $s0-$s6 registers will only be preserved if
+ * they are going to actually be used.
+ */
+#define r_skb_hl MIPS_R_S0 /* skb header length */
+#define r_skb_data MIPS_R_S1 /* skb actual data */
+#define r_off MIPS_R_S2
+#define r_A MIPS_R_S3
+#define r_X MIPS_R_S4
+#define r_skb MIPS_R_S5
+#define r_M MIPS_R_S6
+#define r_skb_len MIPS_R_S7
+#define r_s0 MIPS_R_T4 /* scratch reg 1 */
+#define r_s1 MIPS_R_T5 /* scratch reg 2 */
+#define r_tmp_imm MIPS_R_T6 /* No need to preserve this */
+#define r_tmp MIPS_R_T7 /* No need to preserve this */
+#define r_zero MIPS_R_ZERO
+#define r_sp MIPS_R_SP
+#define r_ra MIPS_R_RA
+
+#ifndef __ASSEMBLY__
+
+/* Declare ASM helpers */
+
+#define DECLARE_LOAD_FUNC(func) \
+ extern u8 func(unsigned long *skb, int offset); \
+ extern u8 func##_negative(unsigned long *skb, int offset); \
+ extern u8 func##_positive(unsigned long *skb, int offset)
+
+DECLARE_LOAD_FUNC(sk_load_word);
+DECLARE_LOAD_FUNC(sk_load_half);
+DECLARE_LOAD_FUNC(sk_load_byte);
+
+#endif
+
#endif /* BPF_JIT_MIPS_OP_H */
diff --git a/arch/mips/net/bpf_jit_asm.S b/arch/mips/net/bpf_jit_asm.S
new file mode 100644
index 0000000..e927260
--- /dev/null
+++ b/arch/mips/net/bpf_jit_asm.S
@@ -0,0 +1,238 @@
+/*
+ * bpf_jib_asm.S: Packet/header access helper functions for MIPS/MIPS64 BPF
+ * compiler.
+ *
+ * Copyright (C) 2015 Imagination Technologies Ltd.
+ * Author: Markos Chandras <markos.chandras@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include "bpf_jit.h"
+
+/* ABI
+ *
+ * r_skb_hl skb header length
+ * r_skb_data skb data
+ * r_off(a1) offset register
+ * r_A BPF register A
+ * r_X PF register X
+ * r_skb(a0) *skb
+ * r_M *scratch memory
+ * r_skb_le skb length
+ * r_s0 Scratch register 0
+ * r_s1 Scratch register 1
+ *
+ * On entry:
+ * a0: *skb
+ * a1: offset (imm or imm + X)
+ *
+ * All non-BPF-ABI registers are free for use. On return, we only
+ * care about r_ret. The BPF-ABI registers are assumed to remain
+ * unmodified during the entire filter operation.
+ */
+
+#define skb a0
+#define offset a1
+#define SKF_LL_OFF (-0x200000) /* Can't include linux/filter.h in assembly */
+
+ /* We know better :) so prevent assembler reordering etc */
+ .set noreorder
+
+#define is_offset_negative(TYPE) \
+ /* If offset is negative we have more work to do */ \
+ slti t0, offset, 0; \
+ bgtz t0, bpf_slow_path_##TYPE##_neg; \
+ /* Be careful what follows in DS. */
+
+#define is_offset_in_header(SIZE, TYPE) \
+ /* Reading from header? */ \
+ addiu $r_s0, $r_skb_hl, -SIZE; \
+ slt t0, $r_s0, offset; \
+ bgtz t0, bpf_slow_path_##TYPE; \
+
+LEAF(sk_load_word)
+ is_offset_negative(word)
+ .globl sk_load_word_positive
+sk_load_word_positive:
+ is_offset_in_header(4, word)
+ /* Offset within header boundaries */
+ PTR_ADDU t1, $r_skb_data, offset
+ lw $r_A, 0(t1)
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ wsbh t0, $r_A
+ rotr $r_A, t0, 16
+#endif
+ jr $r_ra
+ move $r_ret, zero
+ END(sk_load_word)
+
+LEAF(sk_load_half)
+ is_offset_negative(half)
+ .globl sk_load_half_positive
+sk_load_half_positive:
+ is_offset_in_header(2, half)
+ /* Offset within header boundaries */
+ PTR_ADDU t1, $r_skb_data, offset
+ lh $r_A, 0(t1)
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ wsbh t0, $r_A
+ seh $r_A, t0
+#endif
+ jr $r_ra
+ move $r_ret, zero
+ END(sk_load_half)
+
+LEAF(sk_load_byte)
+ is_offset_negative(byte)
+ .globl sk_load_byte_positive
+sk_load_byte_positive:
+ is_offset_in_header(1, byte)
+ /* Offset within header boundaries */
+ PTR_ADDU t1, $r_skb_data, offset
+ lb $r_A, 0(t1)
+ jr $r_ra
+ move $r_ret, zero
+ END(sk_load_byte)
+
+/*
+ * call skb_copy_bits:
+ * (prototype in linux/skbuff.h)
+ *
+ * int skb_copy_bits(sk_buff *skb, int offset, void *to, int len)
+ *
+ * o32 mandates we leave 4 spaces for argument registers in case
+ * the callee needs to use them. Even though we don't care about
+ * the argument registers ourselves, we need to allocate that space
+ * to remain ABI compliant since the callee may want to use that space.
+ * We also allocate 2 more spaces for $r_ra and our return register (*to).
+ *
+ * n64 is a bit different. The *caller* will allocate the space to preserve
+ * the arguments. So in 64-bit kernels, we allocate the 4-arg space for no
+ * good reason but it does not matter that much really.
+ *
+ * (void *to) is returned in r_s0
+ *
+ */
+#define bpf_slow_path_common(SIZE) \
+ /* Quick check. Are we within reasonable boundaries? */ \
+ LONG_ADDIU $r_s1, $r_skb_len, -SIZE; \
+ sltu $r_s0, offset, $r_s1; \
+ beqz $r_s0, fault; \
+ /* Load 4th argument in DS */ \
+ LONG_ADDIU a3, zero, SIZE; \
+ PTR_ADDIU $r_sp, $r_sp, -(6 * SZREG); \
+ PTR_LA t0, skb_copy_bits; \
+ PTR_S $r_ra, (5 * SZREG)($r_sp); \
+ /* Assign low slot to a2 */ \
+ move a2, $r_sp; \
+ jalr t0; \
+ /* Reset our destination slot (DS but it's ok) */ \
+ INT_S zero, (4 * SZREG)($r_sp); \
+ /* \
+ * skb_copy_bits returns 0 on success and -EFAULT \
+ * on error. Our data live in a2. Do not bother with \
+ * our data if an error has been returned. \
+ */ \
+ /* Restore our frame */ \
+ PTR_L $r_ra, (5 * SZREG)($r_sp); \
+ INT_L $r_s0, (4 * SZREG)($r_sp); \
+ bltz v0, fault; \
+ PTR_ADDIU $r_sp, $r_sp, 6 * SZREG; \
+ move $r_ret, zero; \
+
+NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
+ bpf_slow_path_common(4)
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ wsbh t0, $r_s0
+ jr $r_ra
+ rotr $r_A, t0, 16
+#endif
+ jr $r_ra
+ move $r_A, $r_s0
+
+ END(bpf_slow_path_word)
+
+NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp)
+ bpf_slow_path_common(2)
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ jr $r_ra
+ wsbh $r_A, $r_s0
+#endif
+ jr $r_ra
+ move $r_A, $r_s0
+
+ END(bpf_slow_path_half)
+
+NESTED(bpf_slow_path_byte, (6 * SZREG), $r_sp)
+ bpf_slow_path_common(1)
+ jr $r_ra
+ move $r_A, $r_s0
+
+ END(bpf_slow_path_byte)
+
+/*
+ * Negative entry points
+ */
+ .macro bpf_is_end_of_data
+ li t0, SKF_LL_OFF
+ /* Reading link layer data? */
+ slt t1, offset, t0
+ bgtz t1, fault
+ /* Be careful what follows in DS. */
+ .endm
+/*
+ * call skb_copy_bits:
+ * (prototype in linux/filter.h)
+ *
+ * void *bpf_internal_load_pointer_neg_helper(const struct sk_buff *skb,
+ * int k, unsigned int size)
+ *
+ * see above (bpf_slow_path_common) for ABI restrictions
+ */
+#define bpf_negative_common(SIZE) \
+ PTR_ADDIU $r_sp, $r_sp, -(6 * SZREG); \
+ PTR_LA t0, bpf_internal_load_pointer_neg_helper; \
+ PTR_S $r_ra, (5 * SZREG)($r_sp); \
+ jalr t0; \
+ li a2, SIZE; \
+ PTR_L $r_ra, (5 * SZREG)($r_sp); \
+ /* Check return pointer */ \
+ beqz v0, fault; \
+ PTR_ADDIU $r_sp, $r_sp, 6 * SZREG; \
+ /* Preserve our pointer */ \
+ move $r_s0, v0; \
+ /* Set return value */ \
+ move $r_ret, zero; \
+
+bpf_slow_path_word_neg:
+ bpf_is_end_of_data
+NESTED(sk_load_word_negative, (6 * SZREG), $r_sp)
+ bpf_negative_common(4)
+ jr $r_ra
+ lw $r_A, 0($r_s0)
+ END(sk_load_word_negative)
+
+bpf_slow_path_half_neg:
+ bpf_is_end_of_data
+NESTED(sk_load_half_negative, (6 * SZREG), $r_sp)
+ bpf_negative_common(2)
+ jr $r_ra
+ lhu $r_A, 0($r_s0)
+ END(sk_load_half_negative)
+
+bpf_slow_path_byte_neg:
+ bpf_is_end_of_data
+NESTED(sk_load_byte_negative, (6 * SZREG), $r_sp)
+ bpf_negative_common(1)
+ jr $r_ra
+ lbu $r_A, 0($r_s0)
+ END(sk_load_byte_negative)
+
+fault:
+ jr $r_ra
+ addiu $r_ret, zero, 1
diff --git a/arch/mips/netlogic/xlr/platform-flash.c b/arch/mips/netlogic/xlr/platform-flash.c
index 6d3c727..f03131f 100644
--- a/arch/mips/netlogic/xlr/platform-flash.c
+++ b/arch/mips/netlogic/xlr/platform-flash.c
@@ -78,8 +78,6 @@ static struct platform_device xlr_nor_dev = {
.resource = xlr_nor_res,
};
-const char *xlr_part_probes[] = { "cmdlinepart", NULL };
-
/*
* Use "gen_nand" driver for NAND flash
*
@@ -111,7 +109,6 @@ struct platform_nand_data xlr_nand_data = {
.nr_partitions = ARRAY_SIZE(xlr_nand_parts),
.chip_delay = 50,
.partitions = xlr_nand_parts,
- .part_probe_types = xlr_part_probes,
},
.ctrl = {
.cmd_ctrl = xlr_nand_ctrl,
diff --git a/arch/mips/pci/pci-ar2315.c b/arch/mips/pci/pci-ar2315.c
index 07a1822..dadb303 100644
--- a/arch/mips/pci/pci-ar2315.c
+++ b/arch/mips/pci/pci-ar2315.c
@@ -320,7 +320,7 @@ static int ar2315_pci_host_setup(struct ar2315_pci_ctrl *apc)
static void ar2315_pci_irq_handler(unsigned irq, struct irq_desc *desc)
{
- struct ar2315_pci_ctrl *apc = irq_get_handler_data(irq);
+ struct ar2315_pci_ctrl *apc = irq_desc_get_handler_data(desc);
u32 pending = ar2315_pci_reg_read(apc, AR2315_PCI_ISR) &
ar2315_pci_reg_read(apc, AR2315_PCI_IMR);
unsigned pci_irq = 0;
diff --git a/arch/mips/pci/pci-ar71xx.c b/arch/mips/pci/pci-ar71xx.c
index 9e62ad3..283157f 100644
--- a/arch/mips/pci/pci-ar71xx.c
+++ b/arch/mips/pci/pci-ar71xx.c
@@ -232,7 +232,7 @@ static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
void __iomem *base = ath79_reset_base;
u32 pending;
- apc = irq_get_handler_data(irq);
+ apc = irq_desc_get_handler_data(desc);
pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
__raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
@@ -318,23 +318,13 @@ static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
static void ar71xx_pci_reset(void)
{
- void __iomem *ddr_base = ath79_ddr_base;
-
ath79_device_reset_set(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
mdelay(100);
ath79_device_reset_clear(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
mdelay(100);
- __raw_writel(AR71XX_PCI_WIN0_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN0);
- __raw_writel(AR71XX_PCI_WIN1_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN1);
- __raw_writel(AR71XX_PCI_WIN2_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN2);
- __raw_writel(AR71XX_PCI_WIN3_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN3);
- __raw_writel(AR71XX_PCI_WIN4_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN4);
- __raw_writel(AR71XX_PCI_WIN5_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN5);
- __raw_writel(AR71XX_PCI_WIN6_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN6);
- __raw_writel(AR71XX_PCI_WIN7_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN7);
-
+ ath79_ddr_set_pci_windows();
mdelay(100);
}
diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c
index a1b7d2a..0af362b 100644
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -231,7 +231,7 @@ static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
void __iomem *base;
u32 pending;
- apc = irq_get_handler_data(irq);
+ apc = irq_desc_get_handler_data(desc);
base = apc->ctrl_base;
pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
index ec9be8c..80fafe6 100644
--- a/arch/mips/pci/pci-rt3883.c
+++ b/arch/mips/pci/pci-rt3883.c
@@ -134,7 +134,7 @@ static void rt3883_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
struct rt3883_pci_controller *rpc;
u32 pending;
- rpc = irq_get_handler_data(irq);
+ rpc = irq_desc_get_handler_data(desc);
pending = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIINT) &
rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
index 7cf91b9..da301e0 100644
--- a/arch/mips/ralink/irq.c
+++ b/arch/mips/ralink/irq.c
@@ -100,7 +100,7 @@ static void ralink_intc_irq_handler(unsigned int irq, struct irq_desc *desc)
u32 pending = rt_intc_r32(INTC_REG_STATUS0);
if (pending) {
- struct irq_domain *domain = irq_get_handler_data(irq);
+ struct irq_domain *domain = irq_desc_get_handler_data(desc);
generic_handle_irq(irq_find_mapping(domain, __ffs(pending)));
} else {
spurious_interrupt();
diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile
index da8f681..ab4affa 100644
--- a/arch/mips/sgi-ip27/Makefile
+++ b/arch/mips/sgi-ip27/Makefile
@@ -2,9 +2,9 @@
# Makefile for the IP27 specific kernel interface routines under Linux.
#
-obj-y := ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \
- ip27-memory.o ip27-nmi.o ip27-reset.o ip27-timer.o ip27-hubio.o \
- ip27-xtalk.o
+obj-y := ip27-berr.o ip27-irq.o ip27-irqno.o ip27-init.o ip27-klconfig.o \
+ ip27-klnuma.o ip27-memory.o ip27-nmi.o ip27-reset.o ip27-timer.o \
+ ip27-hubio.o ip27-xtalk.o
obj-$(CONFIG_EARLY_PRINTK) += ip27-console.o
obj-$(CONFIG_PCI) += ip27-irq-pci.o
diff --git a/arch/mips/sgi-ip27/ip27-irqno.c b/arch/mips/sgi-ip27/ip27-irqno.c
new file mode 100644
index 0000000..957ab58
--- /dev/null
+++ b/arch/mips/sgi-ip27/ip27-irqno.c
@@ -0,0 +1,48 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/types.h>
+
+#include <asm/barrier.h>
+
+static DECLARE_BITMAP(irq_map, NR_IRQS);
+
+int allocate_irqno(void)
+{
+ int irq;
+
+again:
+ irq = find_first_zero_bit(irq_map, NR_IRQS);
+
+ if (irq >= NR_IRQS)
+ return -ENOSPC;
+
+ if (test_and_set_bit(irq, irq_map))
+ goto again;
+
+ return irq;
+}
+
+/*
+ * Allocate the 16 legacy interrupts for i8259 devices. This happens early
+ * in the kernel initialization so treating allocation failure as BUG() is
+ * ok.
+ */
+void __init alloc_legacy_irqno(void)
+{
+ int i;
+
+ for (i = 0; i <= 16; i++)
+ BUG_ON(test_and_set_bit(i, irq_map));
+}
+
+void free_irqno(unsigned int irq)
+{
+ smp_mb__before_atomic();
+ clear_bit(irq, irq_map);
+ smp_mb__after_atomic();
+}
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index 5fbd360..a8bb972 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -3,7 +3,7 @@ config SIBYTE_SB1250
select CEVT_SB1250
select CSRC_SB1250
select HW_HAS_PCI
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SIBYTE_ENABLE_LDT_IF_PCI
select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
@@ -13,7 +13,7 @@ config SIBYTE_BCM1120
bool
select CEVT_SB1250
select CSRC_SB1250
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SIBYTE_BCM112X
select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
@@ -23,7 +23,7 @@ config SIBYTE_BCM1125
select CEVT_SB1250
select CSRC_SB1250
select HW_HAS_PCI
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SIBYTE_BCM112X
select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
@@ -33,7 +33,7 @@ config SIBYTE_BCM1125H
select CEVT_SB1250
select CSRC_SB1250
select HW_HAS_PCI
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SIBYTE_BCM112X
select SIBYTE_ENABLE_LDT_IF_PCI
select SIBYTE_HAS_ZBUS_PROFILING
@@ -43,7 +43,7 @@ config SIBYTE_BCM112X
bool
select CEVT_SB1250
select CSRC_SB1250
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SIBYTE_SB1xxx_SOC
select SIBYTE_HAS_ZBUS_PROFILING
@@ -52,7 +52,7 @@ config SIBYTE_BCM1x80
select CEVT_BCM1480
select CSRC_BCM1480
select HW_HAS_PCI
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SIBYTE_HAS_ZBUS_PROFILING
select SIBYTE_SB1xxx_SOC
select SYS_SUPPORTS_SMP
@@ -62,7 +62,7 @@ config SIBYTE_BCM1x55
select CEVT_BCM1480
select CSRC_BCM1480
select HW_HAS_PCI
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SIBYTE_SB1xxx_SOC
select SIBYTE_HAS_ZBUS_PROFILING
select SYS_SUPPORTS_SMP
@@ -70,7 +70,7 @@ config SIBYTE_BCM1x55
config SIBYTE_SB1xxx_SOC
bool
select DMA_COHERENT
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SWAP_IO_SPACE
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 6d40bc7..8c337d6 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -8,7 +8,7 @@ config MACH_TX49XX
select MACH_TXX9
select CEVT_R4K
select CSRC_R4K
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select SYS_HAS_CPU_TX49XX
select SYS_SUPPORTS_64BIT_KERNEL
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
index c1be6b3..74927b4 100644
--- a/arch/mips/vr41xx/Kconfig
+++ b/arch/mips/vr41xx/Kconfig
@@ -8,7 +8,7 @@ config CASIO_E55
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select ISA
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -18,7 +18,7 @@ config IBM_WORKPAD
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select ISA
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -28,7 +28,7 @@ config TANBAC_TB022X
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select HW_HAS_PCI
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -44,7 +44,7 @@ config VICTOR_MPC30X
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select HW_HAS_PCI
select PCI_VR41XX
select SYS_SUPPORTS_32BIT_KERNEL
@@ -55,7 +55,7 @@ config ZAO_CAPCELLA
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select IRQ_CPU
+ select IRQ_MIPS_CPU
select HW_HAS_PCI
select PCI_VR41XX
select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 5b6af6a..8732e4c 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -24,7 +24,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE706) += clk-cdce706.o
obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
-obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o
+obj-$(CONFIG_MACH_LOONGSON32) += clk-ls1x.o
obj-$(CONFIG_COMMON_CLK_MAX_GEN) += clk-max-gen.o
obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
obj-$(CONFIG_COMMON_CLK_MAX77802) += clk-max77802.o
@@ -51,6 +51,7 @@ obj-$(CONFIG_ARCH_HI3xxx) += hisilicon/
obj-$(CONFIG_ARCH_HIP04) += hisilicon/
obj-$(CONFIG_ARCH_HIX5HD2) += hisilicon/
obj-$(CONFIG_ARCH_MXC) += imx/
+obj-$(CONFIG_MACH_INGENIC) += ingenic/
obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/
ifeq ($(CONFIG_COMMON_CLK), y)
obj-$(CONFIG_ARCH_MMP) += mmp/
diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
new file mode 100644
index 0000000..cd47b06
--- /dev/null
+++ b/drivers/clk/ingenic/Makefile
@@ -0,0 +1,3 @@
+obj-y += cgu.o
+obj-$(CONFIG_MACH_JZ4740) += jz4740-cgu.o
+obj-$(CONFIG_MACH_JZ4780) += jz4780-cgu.o
diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
new file mode 100644
index 0000000..b936cdd
--- /dev/null
+++ b/drivers/clk/ingenic/cgu.c
@@ -0,0 +1,711 @@
+/*
+ * Ingenic SoC CGU driver
+ *
+ * Copyright (c) 2013-2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/delay.h>
+#include <linux/math64.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include "cgu.h"
+
+#define MHZ (1000 * 1000)
+
+/**
+ * ingenic_cgu_gate_get() - get the value of clock gate register bit
+ * @cgu: reference to the CGU whose registers should be read
+ * @info: info struct describing the gate bit
+ *
+ * Retrieves the state of the clock gate bit described by info. The
+ * caller must hold cgu->lock.
+ *
+ * Return: true if the gate bit is set, else false.
+ */
+static inline bool
+ingenic_cgu_gate_get(struct ingenic_cgu *cgu,
+ const struct ingenic_cgu_gate_info *info)
+{
+ return readl(cgu->base + info->reg) & BIT(info->bit);
+}
+
+/**
+ * ingenic_cgu_gate_set() - set the value of clock gate register bit
+ * @cgu: reference to the CGU whose registers should be modified
+ * @info: info struct describing the gate bit
+ * @val: non-zero to gate a clock, otherwise zero
+ *
+ * Sets the given gate bit in order to gate or ungate a clock.
+ *
+ * The caller must hold cgu->lock.
+ */
+static inline void
+ingenic_cgu_gate_set(struct ingenic_cgu *cgu,
+ const struct ingenic_cgu_gate_info *info, bool val)
+{
+ u32 clkgr = readl(cgu->base + info->reg);
+
+ if (val)
+ clkgr |= BIT(info->bit);
+ else
+ clkgr &= ~BIT(info->bit);
+
+ writel(clkgr, cgu->base + info->reg);
+}
+
+/*
+ * PLL operations
+ */
+
+static unsigned long
+ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+ struct ingenic_cgu *cgu = ingenic_clk->cgu;
+ const struct ingenic_cgu_clk_info *clk_info;
+ const struct ingenic_cgu_pll_info *pll_info;
+ unsigned m, n, od_enc, od;
+ bool bypass, enable;
+ unsigned long flags;
+ u32 ctl;
+
+ clk_info = &cgu->clock_info[ingenic_clk->idx];
+ BUG_ON(clk_info->type != CGU_CLK_PLL);
+ pll_info = &clk_info->pll;
+
+ spin_lock_irqsave(&cgu->lock, flags);
+ ctl = readl(cgu->base + pll_info->reg);
+ spin_unlock_irqrestore(&cgu->lock, flags);
+
+ m = (ctl >> pll_info->m_shift) & GENMASK(pll_info->m_bits - 1, 0);
+ m += pll_info->m_offset;
+ n = (ctl >> pll_info->n_shift) & GENMASK(pll_info->n_bits - 1, 0);
+ n += pll_info->n_offset;
+ od_enc = ctl >> pll_info->od_shift;
+ od_enc &= GENMASK(pll_info->od_bits - 1, 0);
+ bypass = !!(ctl & BIT(pll_info->bypass_bit));
+ enable = !!(ctl & BIT(pll_info->enable_bit));
+
+ if (bypass)
+ return parent_rate;
+
+ if (!enable)
+ return 0;
+
+ for (od = 0; od < pll_info->od_max; od++) {
+ if (pll_info->od_encoding[od] == od_enc)
+ break;
+ }
+ BUG_ON(od == pll_info->od_max);
+ od++;
+
+ return div_u64((u64)parent_rate * m, n * od);
+}
+
+static unsigned long
+ingenic_pll_calc(const struct ingenic_cgu_clk_info *clk_info,
+ unsigned long rate, unsigned long parent_rate,
+ unsigned *pm, unsigned *pn, unsigned *pod)
+{
+ const struct ingenic_cgu_pll_info *pll_info;
+ unsigned m, n, od;
+
+ pll_info = &clk_info->pll;
+ od = 1;
+
+ /*
+ * The frequency after the input divider must be between 10 and 50 MHz.
+ * The highest divider yields the best resolution.
+ */
+ n = parent_rate / (10 * MHZ);
+ n = min_t(unsigned, n, 1 << clk_info->pll.n_bits);
+ n = max_t(unsigned, n, pll_info->n_offset);
+
+ m = (rate / MHZ) * od * n / (parent_rate / MHZ);
+ m = min_t(unsigned, m, 1 << clk_info->pll.m_bits);
+ m = max_t(unsigned, m, pll_info->m_offset);
+
+ if (pm)
+ *pm = m;
+ if (pn)
+ *pn = n;
+ if (pod)
+ *pod = od;
+
+ return div_u64((u64)parent_rate * m, n * od);
+}
+
+static long
+ingenic_pll_round_rate(struct clk_hw *hw, unsigned long req_rate,
+ unsigned long *prate)
+{
+ struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+ struct ingenic_cgu *cgu = ingenic_clk->cgu;
+ const struct ingenic_cgu_clk_info *clk_info;
+
+ clk_info = &cgu->clock_info[ingenic_clk->idx];
+ BUG_ON(clk_info->type != CGU_CLK_PLL);
+
+ return ingenic_pll_calc(clk_info, req_rate, *prate, NULL, NULL, NULL);
+}
+
+static int
+ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
+ unsigned long parent_rate)
+{
+ const unsigned timeout = 100;
+ struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+ struct ingenic_cgu *cgu = ingenic_clk->cgu;
+ const struct ingenic_cgu_clk_info *clk_info;
+ const struct ingenic_cgu_pll_info *pll_info;
+ unsigned long rate, flags;
+ unsigned m, n, od, i;
+ u32 ctl;
+
+ clk_info = &cgu->clock_info[ingenic_clk->idx];
+ BUG_ON(clk_info->type != CGU_CLK_PLL);
+ pll_info = &clk_info->pll;
+
+ rate = ingenic_pll_calc(clk_info, req_rate, parent_rate,
+ &m, &n, &od);
+ if (rate != req_rate)
+ pr_info("ingenic-cgu: request '%s' rate %luHz, actual %luHz\n",
+ clk_info->name, req_rate, rate);
+
+ spin_lock_irqsave(&cgu->lock, flags);
+ ctl = readl(cgu->base + pll_info->reg);
+
+ ctl &= ~(GENMASK(pll_info->m_bits - 1, 0) << pll_info->m_shift);
+ ctl |= (m - pll_info->m_offset) << pll_info->m_shift;
+
+ ctl &= ~(GENMASK(pll_info->n_bits - 1, 0) << pll_info->n_shift);
+ ctl |= (n - pll_info->n_offset) << pll_info->n_shift;
+
+ ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift);
+ ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift;
+
+ ctl &= ~BIT(pll_info->bypass_bit);
+ ctl |= BIT(pll_info->enable_bit);
+
+ writel(ctl, cgu->base + pll_info->reg);
+
+ /* wait for the PLL to stabilise */
+ for (i = 0; i < timeout; i++) {
+ ctl = readl(cgu->base + pll_info->reg);
+ if (ctl & BIT(pll_info->stable_bit))
+ break;
+ mdelay(1);
+ }
+
+ spin_unlock_irqrestore(&cgu->lock, flags);
+
+ if (i == timeout)
+ return -EBUSY;
+
+ return 0;
+}
+
+static const struct clk_ops ingenic_pll_ops = {
+ .recalc_rate = ingenic_pll_recalc_rate,
+ .round_rate = ingenic_pll_round_rate,
+ .set_rate = ingenic_pll_set_rate,
+};
+
+/*
+ * Operations for all non-PLL clocks
+ */
+
+static u8 ingenic_clk_get_parent(struct clk_hw *hw)
+{
+ struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+ struct ingenic_cgu *cgu = ingenic_clk->cgu;
+ const struct ingenic_cgu_clk_info *clk_info;
+ u32 reg;
+ u8 i, hw_idx, idx = 0;
+
+ clk_info = &cgu->clock_info[ingenic_clk->idx];
+
+ if (clk_info->type & CGU_CLK_MUX) {
+ reg = readl(cgu->base + clk_info->mux.reg);
+ hw_idx = (reg >> clk_info->mux.shift) &
+ GENMASK(clk_info->mux.bits - 1, 0);
+
+ /*
+ * Convert the hardware index to the parent index by skipping
+ * over any -1's in the parents array.
+ */
+ for (i = 0; i < hw_idx; i++) {
+ if (clk_info->parents[i] != -1)
+ idx++;
+ }
+ }
+
+ return idx;
+}
+
+static int ingenic_clk_set_parent(struct clk_hw *hw, u8 idx)
+{
+ struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+ struct ingenic_cgu *cgu = ingenic_clk->cgu;
+ const struct ingenic_cgu_clk_info *clk_info;
+ unsigned long flags;
+ u8 curr_idx, hw_idx, num_poss;
+ u32 reg, mask;
+
+ clk_info = &cgu->clock_info[ingenic_clk->idx];
+
+ if (clk_info->type & CGU_CLK_MUX) {
+ /*
+ * Convert the parent index to the hardware index by adding
+ * 1 for any -1 in the parents array preceding the given
+ * index. That is, we want the index of idx'th entry in
+ * clk_info->parents which does not equal -1.
+ */
+ hw_idx = curr_idx = 0;
+ num_poss = 1 << clk_info->mux.bits;
+ for (; hw_idx < num_poss; hw_idx++) {
+ if (clk_info->parents[hw_idx] == -1)
+ continue;
+ if (curr_idx == idx)
+ break;
+ curr_idx++;
+ }
+
+ /* idx should always be a valid parent */
+ BUG_ON(curr_idx != idx);
+
+ mask = GENMASK(clk_info->mux.bits - 1, 0);
+ mask <<= clk_info->mux.shift;
+
+ spin_lock_irqsave(&cgu->lock, flags);
+
+ /* write the register */
+ reg = readl(cgu->base + clk_info->mux.reg);
+ reg &= ~mask;
+ reg |= hw_idx << clk_info->mux.shift;
+ writel(reg, cgu->base + clk_info->mux.reg);
+
+ spin_unlock_irqrestore(&cgu->lock, flags);
+ return 0;
+ }
+
+ return idx ? -EINVAL : 0;
+}
+
+static unsigned long
+ingenic_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+ struct ingenic_cgu *cgu = ingenic_clk->cgu;
+ const struct ingenic_cgu_clk_info *clk_info;
+ unsigned long rate = parent_rate;
+ u32 div_reg, div;
+
+ clk_info = &cgu->clock_info[ingenic_clk->idx];
+
+ if (clk_info->type & CGU_CLK_DIV) {
+ div_reg = readl(cgu->base + clk_info->div.reg);
+ div = (div_reg >> clk_info->div.shift) &
+ GENMASK(clk_info->div.bits - 1, 0);
+ div += 1;
+
+ rate /= div;
+ }
+
+ return rate;
+}
+
+static unsigned
+ingenic_clk_calc_div(const struct ingenic_cgu_clk_info *clk_info,
+ unsigned long parent_rate, unsigned long req_rate)
+{
+ unsigned div;
+
+ /* calculate the divide */
+ div = DIV_ROUND_UP(parent_rate, req_rate);
+
+ /* and impose hardware constraints */
+ div = min_t(unsigned, div, 1 << clk_info->div.bits);
+ div = max_t(unsigned, div, 1);
+
+ return div;
+}
+
+static long
+ingenic_clk_round_rate(struct clk_hw *hw, unsigned long req_rate,
+ unsigned long *parent_rate)
+{
+ struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+ struct ingenic_cgu *cgu = ingenic_clk->cgu;
+ const struct ingenic_cgu_clk_info *clk_info;
+ long rate = *parent_rate;
+
+ clk_info = &cgu->clock_info[ingenic_clk->idx];
+
+ if (clk_info->type & CGU_CLK_DIV)
+ rate /= ingenic_clk_calc_div(clk_info, *parent_rate, req_rate);
+ else if (clk_info->type & CGU_CLK_FIXDIV)
+ rate /= clk_info->fixdiv.div;
+
+ return rate;
+}
+
+static int
+ingenic_clk_set_rate(struct clk_hw *hw, unsigned long req_rate,
+ unsigned long parent_rate)
+{
+ struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+ struct ingenic_cgu *cgu = ingenic_clk->cgu;
+ const struct ingenic_cgu_clk_info *clk_info;
+ const unsigned timeout = 100;
+ unsigned long rate, flags;
+ unsigned div, i;
+ u32 reg, mask;
+ int ret = 0;
+
+ clk_info = &cgu->clock_info[ingenic_clk->idx];
+
+ if (clk_info->type & CGU_CLK_DIV) {
+ div = ingenic_clk_calc_div(clk_info, parent_rate, req_rate);
+ rate = parent_rate / div;
+
+ if (rate != req_rate)
+ return -EINVAL;
+
+ spin_lock_irqsave(&cgu->lock, flags);
+ reg = readl(cgu->base + clk_info->div.reg);
+
+ /* update the divide */
+ mask = GENMASK(clk_info->div.bits - 1, 0);
+ reg &= ~(mask << clk_info->div.shift);
+ reg |= (div - 1) << clk_info->div.shift;
+
+ /* clear the stop bit */
+ if (clk_info->div.stop_bit != -1)
+ reg &= ~BIT(clk_info->div.stop_bit);
+
+ /* set the change enable bit */
+ if (clk_info->div.ce_bit != -1)
+ reg |= BIT(clk_info->div.ce_bit);
+
+ /* update the hardware */
+ writel(reg, cgu->base + clk_info->div.reg);
+
+ /* wait for the change to take effect */
+ if (clk_info->div.busy_bit != -1) {
+ for (i = 0; i < timeout; i++) {
+ reg = readl(cgu->base + clk_info->div.reg);
+ if (!(reg & BIT(clk_info->div.busy_bit)))
+ break;
+ mdelay(1);
+ }
+ if (i == timeout)
+ ret = -EBUSY;
+ }
+
+ spin_unlock_irqrestore(&cgu->lock, flags);
+ return ret;
+ }
+
+ return -EINVAL;
+}
+
+static int ingenic_clk_enable(struct clk_hw *hw)
+{
+ struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+ struct ingenic_cgu *cgu = ingenic_clk->cgu;
+ const struct ingenic_cgu_clk_info *clk_info;
+ unsigned long flags;
+
+ clk_info = &cgu->clock_info[ingenic_clk->idx];
+
+ if (clk_info->type & CGU_CLK_GATE) {
+ /* ungate the clock */
+ spin_lock_irqsave(&cgu->lock, flags);
+ ingenic_cgu_gate_set(cgu, &clk_info->gate, false);
+ spin_unlock_irqrestore(&cgu->lock, flags);
+ }
+
+ return 0;
+}
+
+static void ingenic_clk_disable(struct clk_hw *hw)
+{
+ struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+ struct ingenic_cgu *cgu = ingenic_clk->cgu;
+ const struct ingenic_cgu_clk_info *clk_info;
+ unsigned long flags;
+
+ clk_info = &cgu->clock_info[ingenic_clk->idx];
+
+ if (clk_info->type & CGU_CLK_GATE) {
+ /* gate the clock */
+ spin_lock_irqsave(&cgu->lock, flags);
+ ingenic_cgu_gate_set(cgu, &clk_info->gate, true);
+ spin_unlock_irqrestore(&cgu->lock, flags);
+ }
+}
+
+static int ingenic_clk_is_enabled(struct clk_hw *hw)
+{
+ struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+ struct ingenic_cgu *cgu = ingenic_clk->cgu;
+ const struct ingenic_cgu_clk_info *clk_info;
+ unsigned long flags;
+ int enabled = 1;
+
+ clk_info = &cgu->clock_info[ingenic_clk->idx];
+
+ if (clk_info->type & CGU_CLK_GATE) {
+ spin_lock_irqsave(&cgu->lock, flags);
+ enabled = !ingenic_cgu_gate_get(cgu, &clk_info->gate);
+ spin_unlock_irqrestore(&cgu->lock, flags);
+ }
+
+ return enabled;
+}
+
+static const struct clk_ops ingenic_clk_ops = {
+ .get_parent = ingenic_clk_get_parent,
+ .set_parent = ingenic_clk_set_parent,
+
+ .recalc_rate = ingenic_clk_recalc_rate,
+ .round_rate = ingenic_clk_round_rate,
+ .set_rate = ingenic_clk_set_rate,
+
+ .enable = ingenic_clk_enable,
+ .disable = ingenic_clk_disable,
+ .is_enabled = ingenic_clk_is_enabled,
+};
+
+/*
+ * Setup functions.
+ */
+
+static int ingenic_register_clock(struct ingenic_cgu *cgu, unsigned idx)
+{
+ const struct ingenic_cgu_clk_info *clk_info = &cgu->clock_info[idx];
+ struct clk_init_data clk_init;
+ struct ingenic_clk *ingenic_clk = NULL;
+ struct clk *clk, *parent;
+ const char *parent_names[4];
+ unsigned caps, i, num_possible;
+ int err = -EINVAL;
+
+ BUILD_BUG_ON(ARRAY_SIZE(clk_info->parents) > ARRAY_SIZE(parent_names));
+
+ if (clk_info->type == CGU_CLK_EXT) {
+ clk = of_clk_get_by_name(cgu->np, clk_info->name);
+ if (IS_ERR(clk)) {
+ pr_err("%s: no external clock '%s' provided\n",
+ __func__, clk_info->name);
+ err = -ENODEV;
+ goto out;
+ }
+ err = clk_register_clkdev(clk, clk_info->name, NULL);
+ if (err) {
+ clk_put(clk);
+ goto out;
+ }
+ cgu->clocks.clks[idx] = clk;
+ return 0;
+ }
+
+ if (!clk_info->type) {
+ pr_err("%s: no clock type specified for '%s'\n", __func__,
+ clk_info->name);
+ goto out;
+ }
+
+ ingenic_clk = kzalloc(sizeof(*ingenic_clk), GFP_KERNEL);
+ if (!ingenic_clk) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ ingenic_clk->hw.init = &clk_init;
+ ingenic_clk->cgu = cgu;
+ ingenic_clk->idx = idx;
+
+ clk_init.name = clk_info->name;
+ clk_init.flags = 0;
+ clk_init.parent_names = parent_names;
+
+ caps = clk_info->type;
+
+ if (caps & (CGU_CLK_MUX | CGU_CLK_CUSTOM)) {
+ clk_init.num_parents = 0;
+
+ if (caps & CGU_CLK_MUX)
+ num_possible = 1 << clk_info->mux.bits;
+ else
+ num_possible = ARRAY_SIZE(clk_info->parents);
+
+ for (i = 0; i < num_possible; i++) {
+ if (clk_info->parents[i] == -1)
+ continue;
+
+ parent = cgu->clocks.clks[clk_info->parents[i]];
+ parent_names[clk_init.num_parents] =
+ __clk_get_name(parent);
+ clk_init.num_parents++;
+ }
+
+ BUG_ON(!clk_init.num_parents);
+ BUG_ON(clk_init.num_parents > ARRAY_SIZE(parent_names));
+ } else {
+ BUG_ON(clk_info->parents[0] == -1);
+ clk_init.num_parents = 1;
+ parent = cgu->clocks.clks[clk_info->parents[0]];
+ parent_names[0] = __clk_get_name(parent);
+ }
+
+ if (caps & CGU_CLK_CUSTOM) {
+ clk_init.ops = clk_info->custom.clk_ops;
+
+ caps &= ~CGU_CLK_CUSTOM;
+
+ if (caps) {
+ pr_err("%s: custom clock may not be combined with type 0x%x\n",
+ __func__, caps);
+ goto out;
+ }
+ } else if (caps & CGU_CLK_PLL) {
+ clk_init.ops = &ingenic_pll_ops;
+
+ caps &= ~CGU_CLK_PLL;
+
+ if (caps) {
+ pr_err("%s: PLL may not be combined with type 0x%x\n",
+ __func__, caps);
+ goto out;
+ }
+ } else {
+ clk_init.ops = &ingenic_clk_ops;
+ }
+
+ /* nothing to do for gates or fixed dividers */
+ caps &= ~(CGU_CLK_GATE | CGU_CLK_FIXDIV);
+
+ if (caps & CGU_CLK_MUX) {
+ if (!(caps & CGU_CLK_MUX_GLITCHFREE))
+ clk_init.flags |= CLK_SET_PARENT_GATE;
+
+ caps &= ~(CGU_CLK_MUX | CGU_CLK_MUX_GLITCHFREE);
+ }
+
+ if (caps & CGU_CLK_DIV) {
+ caps &= ~CGU_CLK_DIV;
+ } else {
+ /* pass rate changes to the parent clock */
+ clk_init.flags |= CLK_SET_RATE_PARENT;
+ }
+
+ if (caps) {
+ pr_err("%s: unknown clock type 0x%x\n", __func__, caps);
+ goto out;
+ }
+
+ clk = clk_register(NULL, &ingenic_clk->hw);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock '%s'\n", __func__,
+ clk_info->name);
+ err = PTR_ERR(clk);
+ goto out;
+ }
+
+ err = clk_register_clkdev(clk, clk_info->name, NULL);
+ if (err)
+ goto out;
+
+ cgu->clocks.clks[idx] = clk;
+out:
+ if (err)
+ kfree(ingenic_clk);
+ return err;
+}
+
+struct ingenic_cgu *
+ingenic_cgu_new(const struct ingenic_cgu_clk_info *clock_info,
+ unsigned num_clocks, struct device_node *np)
+{
+ struct ingenic_cgu *cgu;
+
+ cgu = kzalloc(sizeof(*cgu), GFP_KERNEL);
+ if (!cgu)
+ goto err_out;
+
+ cgu->base = of_iomap(np, 0);
+ if (!cgu->base) {
+ pr_err("%s: failed to map CGU registers\n", __func__);
+ goto err_out_free;
+ }
+
+ cgu->np = np;
+ cgu->clock_info = clock_info;
+ cgu->clocks.clk_num = num_clocks;
+
+ spin_lock_init(&cgu->lock);
+
+ return cgu;
+
+err_out_free:
+ kfree(cgu);
+err_out:
+ return NULL;
+}
+
+int ingenic_cgu_register_clocks(struct ingenic_cgu *cgu)
+{
+ unsigned i;
+ int err;
+
+ cgu->clocks.clks = kcalloc(cgu->clocks.clk_num, sizeof(struct clk *),
+ GFP_KERNEL);
+ if (!cgu->clocks.clks) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ for (i = 0; i < cgu->clocks.clk_num; i++) {
+ err = ingenic_register_clock(cgu, i);
+ if (err)
+ goto err_out_unregister;
+ }
+
+ err = of_clk_add_provider(cgu->np, of_clk_src_onecell_get,
+ &cgu->clocks);
+ if (err)
+ goto err_out_unregister;
+
+ return 0;
+
+err_out_unregister:
+ for (i = 0; i < cgu->clocks.clk_num; i++) {
+ if (!cgu->clocks.clks[i])
+ continue;
+ if (cgu->clock_info[i].type & CGU_CLK_EXT)
+ clk_put(cgu->clocks.clks[i]);
+ else
+ clk_unregister(cgu->clocks.clks[i]);
+ }
+ kfree(cgu->clocks.clks);
+err_out:
+ return err;
+}
diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
new file mode 100644
index 0000000..99347e2
--- /dev/null
+++ b/drivers/clk/ingenic/cgu.h
@@ -0,0 +1,223 @@
+/*
+ * Ingenic SoC CGU driver
+ *
+ * Copyright (c) 2013-2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DRIVERS_CLK_INGENIC_CGU_H__
+#define __DRIVERS_CLK_INGENIC_CGU_H__
+
+#include <linux/bitops.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+
+/**
+ * struct ingenic_cgu_pll_info - information about a PLL
+ * @reg: the offset of the PLL's control register within the CGU
+ * @m_shift: the number of bits to shift the multiplier value by (ie. the
+ * index of the lowest bit of the multiplier value in the PLL's
+ * control register)
+ * @m_bits: the size of the multiplier field in bits
+ * @m_offset: the multiplier value which encodes to 0 in the PLL's control
+ * register
+ * @n_shift: the number of bits to shift the divider value by (ie. the
+ * index of the lowest bit of the divider value in the PLL's
+ * control register)
+ * @n_bits: the size of the divider field in bits
+ * @n_offset: the divider value which encodes to 0 in the PLL's control
+ * register
+ * @od_shift: the number of bits to shift the post-VCO divider value by (ie.
+ * the index of the lowest bit of the post-VCO divider value in
+ * the PLL's control register)
+ * @od_bits: the size of the post-VCO divider field in bits
+ * @od_max: the maximum post-VCO divider value
+ * @od_encoding: a pointer to an array mapping post-VCO divider values to
+ * their encoded values in the PLL control register, or -1 for
+ * unsupported values
+ * @bypass_bit: the index of the bypass bit in the PLL control register
+ * @enable_bit: the index of the enable bit in the PLL control register
+ * @stable_bit: the index of the stable bit in the PLL control register
+ */
+struct ingenic_cgu_pll_info {
+ unsigned reg;
+ const s8 *od_encoding;
+ u8 m_shift, m_bits, m_offset;
+ u8 n_shift, n_bits, n_offset;
+ u8 od_shift, od_bits, od_max;
+ u8 bypass_bit;
+ u8 enable_bit;
+ u8 stable_bit;
+};
+
+/**
+ * struct ingenic_cgu_mux_info - information about a clock mux
+ * @reg: offset of the mux control register within the CGU
+ * @shift: number of bits to shift the mux value by (ie. the index of
+ * the lowest bit of the mux value within its control register)
+ * @bits: the size of the mux value in bits
+ */
+struct ingenic_cgu_mux_info {
+ unsigned reg;
+ u8 shift;
+ u8 bits;
+};
+
+/**
+ * struct ingenic_cgu_div_info - information about a divider
+ * @reg: offset of the divider control register within the CGU
+ * @shift: number of bits to shift the divide value by (ie. the index of
+ * the lowest bit of the divide value within its control register)
+ * @bits: the size of the divide value in bits
+ * @ce_bit: the index of the change enable bit within reg, or -1 if there
+ * isn't one
+ * @busy_bit: the index of the busy bit within reg, or -1 if there isn't one
+ * @stop_bit: the index of the stop bit within reg, or -1 if there isn't one
+ */
+struct ingenic_cgu_div_info {
+ unsigned reg;
+ u8 shift;
+ u8 bits;
+ s8 ce_bit;
+ s8 busy_bit;
+ s8 stop_bit;
+};
+
+/**
+ * struct ingenic_cgu_fixdiv_info - information about a fixed divider
+ * @div: the divider applied to the parent clock
+ */
+struct ingenic_cgu_fixdiv_info {
+ unsigned div;
+};
+
+/**
+ * struct ingenic_cgu_gate_info - information about a clock gate
+ * @reg: offset of the gate control register within the CGU
+ * @bit: offset of the bit in the register that controls the gate
+ */
+struct ingenic_cgu_gate_info {
+ unsigned reg;
+ u8 bit;
+};
+
+/**
+ * struct ingenic_cgu_custom_info - information about a custom (SoC) clock
+ * @clk_ops: custom clock operation callbacks
+ */
+struct ingenic_cgu_custom_info {
+ struct clk_ops *clk_ops;
+};
+
+/**
+ * struct ingenic_cgu_clk_info - information about a clock
+ * @name: name of the clock
+ * @type: a bitmask formed from CGU_CLK_* values
+ * @parents: an array of the indices of potential parents of this clock
+ * within the clock_info array of the CGU, or -1 in entries
+ * which correspond to no valid parent
+ * @pll: information valid if type includes CGU_CLK_PLL
+ * @gate: information valid if type includes CGU_CLK_GATE
+ * @mux: information valid if type includes CGU_CLK_MUX
+ * @div: information valid if type includes CGU_CLK_DIV
+ * @fixdiv: information valid if type includes CGU_CLK_FIXDIV
+ * @custom: information valid if type includes CGU_CLK_CUSTOM
+ */
+struct ingenic_cgu_clk_info {
+ const char *name;
+
+ enum {
+ CGU_CLK_NONE = 0,
+ CGU_CLK_EXT = BIT(0),
+ CGU_CLK_PLL = BIT(1),
+ CGU_CLK_GATE = BIT(2),
+ CGU_CLK_MUX = BIT(3),
+ CGU_CLK_MUX_GLITCHFREE = BIT(4),
+ CGU_CLK_DIV = BIT(5),
+ CGU_CLK_FIXDIV = BIT(6),
+ CGU_CLK_CUSTOM = BIT(7),
+ } type;
+
+ int parents[4];
+
+ union {
+ struct ingenic_cgu_pll_info pll;
+
+ struct {
+ struct ingenic_cgu_gate_info gate;
+ struct ingenic_cgu_mux_info mux;
+ struct ingenic_cgu_div_info div;
+ struct ingenic_cgu_fixdiv_info fixdiv;
+ };
+
+ struct ingenic_cgu_custom_info custom;
+ };
+};
+
+/**
+ * struct ingenic_cgu - data about the CGU
+ * @np: the device tree node that caused the CGU to be probed
+ * @base: the ioremap'ed base address of the CGU registers
+ * @clock_info: an array containing information about implemented clocks
+ * @clocks: used to provide clocks to DT, allows lookup of struct clk*
+ * @lock: lock to be held whilst manipulating CGU registers
+ */
+struct ingenic_cgu {
+ struct device_node *np;
+ void __iomem *base;
+
+ const struct ingenic_cgu_clk_info *clock_info;
+ struct clk_onecell_data clocks;
+
+ spinlock_t lock;
+};
+
+/**
+ * struct ingenic_clk - private data for a clock
+ * @hw: see Documentation/clk.txt
+ * @cgu: a pointer to the CGU data
+ * @idx: the index of this clock in cgu->clock_info
+ */
+struct ingenic_clk {
+ struct clk_hw hw;
+ struct ingenic_cgu *cgu;
+ unsigned idx;
+};
+
+#define to_ingenic_clk(_hw) container_of(_hw, struct ingenic_clk, hw)
+
+/**
+ * ingenic_cgu_new() - create a new CGU instance
+ * @clock_info: an array of clock information structures describing the clocks
+ * which are implemented by the CGU
+ * @num_clocks: the number of entries in clock_info
+ * @np: the device tree node which causes this CGU to be probed
+ *
+ * Return: a pointer to the CGU instance if initialisation is successful,
+ * otherwise NULL.
+ */
+struct ingenic_cgu *
+ingenic_cgu_new(const struct ingenic_cgu_clk_info *clock_info,
+ unsigned num_clocks, struct device_node *np);
+
+/**
+ * ingenic_cgu_register_clocks() - Registers the clocks
+ * @cgu: pointer to cgu data
+ *
+ * Register the clocks described by the CGU with the common clock framework.
+ *
+ * Return: 0 on success or -errno if unsuccesful.
+ */
+int ingenic_cgu_register_clocks(struct ingenic_cgu *cgu);
+
+#endif /* __DRIVERS_CLK_INGENIC_CGU_H__ */
diff --git a/drivers/clk/ingenic/jz4740-cgu.c b/drivers/clk/ingenic/jz4740-cgu.c
new file mode 100644
index 0000000..305a26c2
--- /dev/null
+++ b/drivers/clk/ingenic/jz4740-cgu.c
@@ -0,0 +1,303 @@
+/*
+ * Ingenic JZ4740 SoC CGU driver
+ *
+ * Copyright (c) 2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <dt-bindings/clock/jz4740-cgu.h>
+#include <asm/mach-jz4740/clock.h>
+#include "cgu.h"
+
+/* CGU register offsets */
+#define CGU_REG_CPCCR 0x00
+#define CGU_REG_LCR 0x04
+#define CGU_REG_CPPCR 0x10
+#define CGU_REG_CLKGR 0x20
+#define CGU_REG_SCR 0x24
+#define CGU_REG_I2SCDR 0x60
+#define CGU_REG_LPCDR 0x64
+#define CGU_REG_MSCCDR 0x68
+#define CGU_REG_UHCCDR 0x6c
+#define CGU_REG_SSICDR 0x74
+
+/* bits within a PLL control register */
+#define PLLCTL_M_SHIFT 23
+#define PLLCTL_M_MASK (0x1ff << PLLCTL_M_SHIFT)
+#define PLLCTL_N_SHIFT 18
+#define PLLCTL_N_MASK (0x1f << PLLCTL_N_SHIFT)
+#define PLLCTL_OD_SHIFT 16
+#define PLLCTL_OD_MASK (0x3 << PLLCTL_OD_SHIFT)
+#define PLLCTL_STABLE (1 << 10)
+#define PLLCTL_BYPASS (1 << 9)
+#define PLLCTL_ENABLE (1 << 8)
+
+/* bits within the LCR register */
+#define LCR_SLEEP (1 << 0)
+
+/* bits within the CLKGR register */
+#define CLKGR_UDC (1 << 11)
+
+static struct ingenic_cgu *cgu;
+
+static const s8 pll_od_encoding[4] = {
+ 0x0, 0x1, -1, 0x3,
+};
+
+static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
+
+ /* External clocks */
+
+ [JZ4740_CLK_EXT] = { "ext", CGU_CLK_EXT },
+ [JZ4740_CLK_RTC] = { "rtc", CGU_CLK_EXT },
+
+ [JZ4740_CLK_PLL] = {
+ "pll", CGU_CLK_PLL,
+ .parents = { JZ4740_CLK_EXT, -1, -1, -1 },
+ .pll = {
+ .reg = CGU_REG_CPPCR,
+ .m_shift = 23,
+ .m_bits = 9,
+ .m_offset = 2,
+ .n_shift = 18,
+ .n_bits = 5,
+ .n_offset = 2,
+ .od_shift = 16,
+ .od_bits = 2,
+ .od_max = 4,
+ .od_encoding = pll_od_encoding,
+ .stable_bit = 10,
+ .bypass_bit = 9,
+ .enable_bit = 8,
+ },
+ },
+
+ /* Muxes & dividers */
+
+ [JZ4740_CLK_PLL_HALF] = {
+ "pll half", CGU_CLK_DIV,
+ .parents = { JZ4740_CLK_PLL, -1, -1, -1 },
+ .div = { CGU_REG_CPCCR, 21, 1, -1, -1, -1 },
+ },
+
+ [JZ4740_CLK_CCLK] = {
+ "cclk", CGU_CLK_DIV,
+ .parents = { JZ4740_CLK_PLL, -1, -1, -1 },
+ .div = { CGU_REG_CPCCR, 0, 4, 22, -1, -1 },
+ },
+
+ [JZ4740_CLK_HCLK] = {
+ "hclk", CGU_CLK_DIV,
+ .parents = { JZ4740_CLK_PLL, -1, -1, -1 },
+ .div = { CGU_REG_CPCCR, 4, 4, 22, -1, -1 },
+ },
+
+ [JZ4740_CLK_PCLK] = {
+ "pclk", CGU_CLK_DIV,
+ .parents = { JZ4740_CLK_PLL, -1, -1, -1 },
+ .div = { CGU_REG_CPCCR, 8, 4, 22, -1, -1 },
+ },
+
+ [JZ4740_CLK_MCLK] = {
+ "mclk", CGU_CLK_DIV,
+ .parents = { JZ4740_CLK_PLL, -1, -1, -1 },
+ .div = { CGU_REG_CPCCR, 12, 4, 22, -1, -1 },
+ },
+
+ [JZ4740_CLK_LCD] = {
+ "lcd", CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { JZ4740_CLK_PLL_HALF, -1, -1, -1 },
+ .div = { CGU_REG_CPCCR, 16, 5, 22, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 10 },
+ },
+
+ [JZ4740_CLK_LCD_PCLK] = {
+ "lcd_pclk", CGU_CLK_DIV,
+ .parents = { JZ4740_CLK_PLL_HALF, -1, -1, -1 },
+ .div = { CGU_REG_LPCDR, 0, 11, -1, -1, -1 },
+ },
+
+ [JZ4740_CLK_I2S] = {
+ "i2s", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { JZ4740_CLK_EXT, JZ4740_CLK_PLL_HALF, -1, -1 },
+ .mux = { CGU_REG_CPCCR, 31, 1 },
+ .div = { CGU_REG_I2SCDR, 0, 8, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 6 },
+ },
+
+ [JZ4740_CLK_SPI] = {
+ "spi", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { JZ4740_CLK_EXT, JZ4740_CLK_PLL, -1, -1 },
+ .mux = { CGU_REG_SSICDR, 31, 1 },
+ .div = { CGU_REG_SSICDR, 0, 4, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 4 },
+ },
+
+ [JZ4740_CLK_MMC] = {
+ "mmc", CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { JZ4740_CLK_PLL_HALF, -1, -1, -1 },
+ .div = { CGU_REG_MSCCDR, 0, 5, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 7 },
+ },
+
+ [JZ4740_CLK_UHC] = {
+ "uhc", CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { JZ4740_CLK_PLL_HALF, -1, -1, -1 },
+ .div = { CGU_REG_UHCCDR, 0, 4, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 14 },
+ },
+
+ [JZ4740_CLK_UDC] = {
+ "udc", CGU_CLK_MUX | CGU_CLK_DIV,
+ .parents = { JZ4740_CLK_EXT, JZ4740_CLK_PLL_HALF, -1, -1 },
+ .mux = { CGU_REG_CPCCR, 29, 1 },
+ .div = { CGU_REG_CPCCR, 23, 6, -1, -1, -1 },
+ .gate = { CGU_REG_SCR, 6 },
+ },
+
+ /* Gate-only clocks */
+
+ [JZ4740_CLK_UART0] = {
+ "uart0", CGU_CLK_GATE,
+ .parents = { JZ4740_CLK_EXT, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 0 },
+ },
+
+ [JZ4740_CLK_UART1] = {
+ "uart1", CGU_CLK_GATE,
+ .parents = { JZ4740_CLK_EXT, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 15 },
+ },
+
+ [JZ4740_CLK_DMA] = {
+ "dma", CGU_CLK_GATE,
+ .parents = { JZ4740_CLK_PCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 12 },
+ },
+
+ [JZ4740_CLK_IPU] = {
+ "ipu", CGU_CLK_GATE,
+ .parents = { JZ4740_CLK_PCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 13 },
+ },
+
+ [JZ4740_CLK_ADC] = {
+ "adc", CGU_CLK_GATE,
+ .parents = { JZ4740_CLK_EXT, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 8 },
+ },
+
+ [JZ4740_CLK_I2C] = {
+ "i2c", CGU_CLK_GATE,
+ .parents = { JZ4740_CLK_EXT, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 3 },
+ },
+
+ [JZ4740_CLK_AIC] = {
+ "aic", CGU_CLK_GATE,
+ .parents = { JZ4740_CLK_EXT, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 5 },
+ },
+};
+
+static void __init jz4740_cgu_init(struct device_node *np)
+{
+ int retval;
+
+ cgu = ingenic_cgu_new(jz4740_cgu_clocks,
+ ARRAY_SIZE(jz4740_cgu_clocks), np);
+ if (!cgu) {
+ pr_err("%s: failed to initialise CGU\n", __func__);
+ return;
+ }
+
+ retval = ingenic_cgu_register_clocks(cgu);
+ if (retval)
+ pr_err("%s: failed to register CGU Clocks\n", __func__);
+}
+CLK_OF_DECLARE(jz4740_cgu, "ingenic,jz4740-cgu", jz4740_cgu_init);
+
+void jz4740_clock_set_wait_mode(enum jz4740_wait_mode mode)
+{
+ uint32_t lcr = readl(cgu->base + CGU_REG_LCR);
+
+ switch (mode) {
+ case JZ4740_WAIT_MODE_IDLE:
+ lcr &= ~LCR_SLEEP;
+ break;
+
+ case JZ4740_WAIT_MODE_SLEEP:
+ lcr |= LCR_SLEEP;
+ break;
+ }
+
+ writel(lcr, cgu->base + CGU_REG_LCR);
+}
+
+void jz4740_clock_udc_disable_auto_suspend(void)
+{
+ uint32_t clkgr = readl(cgu->base + CGU_REG_CLKGR);
+
+ clkgr &= ~CLKGR_UDC;
+ writel(clkgr, cgu->base + CGU_REG_CLKGR);
+}
+EXPORT_SYMBOL_GPL(jz4740_clock_udc_disable_auto_suspend);
+
+void jz4740_clock_udc_enable_auto_suspend(void)
+{
+ uint32_t clkgr = readl(cgu->base + CGU_REG_CLKGR);
+
+ clkgr |= CLKGR_UDC;
+ writel(clkgr, cgu->base + CGU_REG_CLKGR);
+}
+EXPORT_SYMBOL_GPL(jz4740_clock_udc_enable_auto_suspend);
+
+#define JZ_CLOCK_GATE_UART0 BIT(0)
+#define JZ_CLOCK_GATE_TCU BIT(1)
+#define JZ_CLOCK_GATE_DMAC BIT(12)
+
+void jz4740_clock_suspend(void)
+{
+ uint32_t clkgr, cppcr;
+
+ clkgr = readl(cgu->base + CGU_REG_CLKGR);
+ clkgr |= JZ_CLOCK_GATE_TCU | JZ_CLOCK_GATE_DMAC | JZ_CLOCK_GATE_UART0;
+ writel(clkgr, cgu->base + CGU_REG_CLKGR);
+
+ cppcr = readl(cgu->base + CGU_REG_CPPCR);
+ cppcr &= ~BIT(jz4740_cgu_clocks[JZ4740_CLK_PLL].pll.enable_bit);
+ writel(cppcr, cgu->base + CGU_REG_CPPCR);
+}
+
+void jz4740_clock_resume(void)
+{
+ uint32_t clkgr, cppcr, stable;
+
+ cppcr = readl(cgu->base + CGU_REG_CPPCR);
+ cppcr |= BIT(jz4740_cgu_clocks[JZ4740_CLK_PLL].pll.enable_bit);
+ writel(cppcr, cgu->base + CGU_REG_CPPCR);
+
+ stable = BIT(jz4740_cgu_clocks[JZ4740_CLK_PLL].pll.stable_bit);
+ do {
+ cppcr = readl(cgu->base + CGU_REG_CPPCR);
+ } while (!(cppcr & stable));
+
+ clkgr = readl(cgu->base + CGU_REG_CLKGR);
+ clkgr &= ~JZ_CLOCK_GATE_TCU;
+ clkgr &= ~JZ_CLOCK_GATE_DMAC;
+ clkgr &= ~JZ_CLOCK_GATE_UART0;
+ writel(clkgr, cgu->base + CGU_REG_CLKGR);
+}
diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c
new file mode 100644
index 0000000..431f962
--- /dev/null
+++ b/drivers/clk/ingenic/jz4780-cgu.c
@@ -0,0 +1,733 @@
+/*
+ * Ingenic JZ4780 SoC CGU driver
+ *
+ * Copyright (c) 2013-2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <dt-bindings/clock/jz4780-cgu.h>
+#include "cgu.h"
+
+/* CGU register offsets */
+#define CGU_REG_CLOCKCONTROL 0x00
+#define CGU_REG_PLLCONTROL 0x0c
+#define CGU_REG_APLL 0x10
+#define CGU_REG_MPLL 0x14
+#define CGU_REG_EPLL 0x18
+#define CGU_REG_VPLL 0x1c
+#define CGU_REG_CLKGR0 0x20
+#define CGU_REG_OPCR 0x24
+#define CGU_REG_CLKGR1 0x28
+#define CGU_REG_DDRCDR 0x2c
+#define CGU_REG_VPUCDR 0x30
+#define CGU_REG_USBPCR 0x3c
+#define CGU_REG_USBRDT 0x40
+#define CGU_REG_USBVBFIL 0x44
+#define CGU_REG_USBPCR1 0x48
+#define CGU_REG_LP0CDR 0x54
+#define CGU_REG_I2SCDR 0x60
+#define CGU_REG_LP1CDR 0x64
+#define CGU_REG_MSC0CDR 0x68
+#define CGU_REG_UHCCDR 0x6c
+#define CGU_REG_SSICDR 0x74
+#define CGU_REG_CIMCDR 0x7c
+#define CGU_REG_PCMCDR 0x84
+#define CGU_REG_GPUCDR 0x88
+#define CGU_REG_HDMICDR 0x8c
+#define CGU_REG_MSC1CDR 0xa4
+#define CGU_REG_MSC2CDR 0xa8
+#define CGU_REG_BCHCDR 0xac
+#define CGU_REG_CLOCKSTATUS 0xd4
+
+/* bits within the OPCR register */
+#define OPCR_SPENDN0 (1 << 7)
+#define OPCR_SPENDN1 (1 << 6)
+
+/* bits within the USBPCR register */
+#define USBPCR_USB_MODE BIT(31)
+#define USBPCR_IDPULLUP_MASK (0x3 << 28)
+#define USBPCR_COMMONONN BIT(25)
+#define USBPCR_VBUSVLDEXT BIT(24)
+#define USBPCR_VBUSVLDEXTSEL BIT(23)
+#define USBPCR_POR BIT(22)
+#define USBPCR_OTG_DISABLE BIT(20)
+#define USBPCR_COMPDISTUNE_MASK (0x7 << 17)
+#define USBPCR_OTGTUNE_MASK (0x7 << 14)
+#define USBPCR_SQRXTUNE_MASK (0x7 << 11)
+#define USBPCR_TXFSLSTUNE_MASK (0xf << 7)
+#define USBPCR_TXPREEMPHTUNE BIT(6)
+#define USBPCR_TXHSXVTUNE_MASK (0x3 << 4)
+#define USBPCR_TXVREFTUNE_MASK 0xf
+
+/* bits within the USBPCR1 register */
+#define USBPCR1_REFCLKSEL_SHIFT 26
+#define USBPCR1_REFCLKSEL_MASK (0x3 << USBPCR1_REFCLKSEL_SHIFT)
+#define USBPCR1_REFCLKSEL_CORE (0x2 << USBPCR1_REFCLKSEL_SHIFT)
+#define USBPCR1_REFCLKDIV_SHIFT 24
+#define USBPCR1_REFCLKDIV_MASK (0x3 << USBPCR1_REFCLKDIV_SHIFT)
+#define USBPCR1_REFCLKDIV_19_2 (0x3 << USBPCR1_REFCLKDIV_SHIFT)
+#define USBPCR1_REFCLKDIV_48 (0x2 << USBPCR1_REFCLKDIV_SHIFT)
+#define USBPCR1_REFCLKDIV_24 (0x1 << USBPCR1_REFCLKDIV_SHIFT)
+#define USBPCR1_REFCLKDIV_12 (0x0 << USBPCR1_REFCLKDIV_SHIFT)
+#define USBPCR1_USB_SEL BIT(28)
+#define USBPCR1_WORD_IF0 BIT(19)
+#define USBPCR1_WORD_IF1 BIT(18)
+
+/* bits within the USBRDT register */
+#define USBRDT_VBFIL_LD_EN BIT(25)
+#define USBRDT_USBRDT_MASK 0x7fffff
+
+/* bits within the USBVBFIL register */
+#define USBVBFIL_IDDIGFIL_SHIFT 16
+#define USBVBFIL_IDDIGFIL_MASK (0xffff << USBVBFIL_IDDIGFIL_SHIFT)
+#define USBVBFIL_USBVBFIL_MASK (0xffff)
+
+static struct ingenic_cgu *cgu;
+
+static u8 jz4780_otg_phy_get_parent(struct clk_hw *hw)
+{
+ /* we only use CLKCORE, revisit if that ever changes */
+ return 0;
+}
+
+static int jz4780_otg_phy_set_parent(struct clk_hw *hw, u8 idx)
+{
+ unsigned long flags;
+ u32 usbpcr1;
+
+ if (idx > 0)
+ return -EINVAL;
+
+ spin_lock_irqsave(&cgu->lock, flags);
+
+ usbpcr1 = readl(cgu->base + CGU_REG_USBPCR1);
+ usbpcr1 &= ~USBPCR1_REFCLKSEL_MASK;
+ /* we only use CLKCORE */
+ usbpcr1 |= USBPCR1_REFCLKSEL_CORE;
+ writel(usbpcr1, cgu->base + CGU_REG_USBPCR1);
+
+ spin_unlock_irqrestore(&cgu->lock, flags);
+ return 0;
+}
+
+static unsigned long jz4780_otg_phy_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u32 usbpcr1;
+ unsigned refclk_div;
+
+ usbpcr1 = readl(cgu->base + CGU_REG_USBPCR1);
+ refclk_div = usbpcr1 & USBPCR1_REFCLKDIV_MASK;
+
+ switch (refclk_div) {
+ case USBPCR1_REFCLKDIV_12:
+ return 12000000;
+
+ case USBPCR1_REFCLKDIV_24:
+ return 24000000;
+
+ case USBPCR1_REFCLKDIV_48:
+ return 48000000;
+
+ case USBPCR1_REFCLKDIV_19_2:
+ return 19200000;
+ }
+
+ BUG();
+ return parent_rate;
+}
+
+static long jz4780_otg_phy_round_rate(struct clk_hw *hw, unsigned long req_rate,
+ unsigned long *parent_rate)
+{
+ if (req_rate < 15600000)
+ return 12000000;
+
+ if (req_rate < 21600000)
+ return 19200000;
+
+ if (req_rate < 36000000)
+ return 24000000;
+
+ return 48000000;
+}
+
+static int jz4780_otg_phy_set_rate(struct clk_hw *hw, unsigned long req_rate,
+ unsigned long parent_rate)
+{
+ unsigned long flags;
+ u32 usbpcr1, div_bits;
+
+ switch (req_rate) {
+ case 12000000:
+ div_bits = USBPCR1_REFCLKDIV_12;
+ break;
+
+ case 19200000:
+ div_bits = USBPCR1_REFCLKDIV_19_2;
+ break;
+
+ case 24000000:
+ div_bits = USBPCR1_REFCLKDIV_24;
+ break;
+
+ case 48000000:
+ div_bits = USBPCR1_REFCLKDIV_48;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&cgu->lock, flags);
+
+ usbpcr1 = readl(cgu->base + CGU_REG_USBPCR1);
+ usbpcr1 &= ~USBPCR1_REFCLKDIV_MASK;
+ usbpcr1 |= div_bits;
+ writel(usbpcr1, cgu->base + CGU_REG_USBPCR1);
+
+ spin_unlock_irqrestore(&cgu->lock, flags);
+ return 0;
+}
+
+static struct clk_ops jz4780_otg_phy_ops = {
+ .get_parent = jz4780_otg_phy_get_parent,
+ .set_parent = jz4780_otg_phy_set_parent,
+
+ .recalc_rate = jz4780_otg_phy_recalc_rate,
+ .round_rate = jz4780_otg_phy_round_rate,
+ .set_rate = jz4780_otg_phy_set_rate,
+};
+
+static const s8 pll_od_encoding[16] = {
+ 0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7,
+ 0x8, 0x9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf,
+};
+
+static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = {
+
+ /* External clocks */
+
+ [JZ4780_CLK_EXCLK] = { "ext", CGU_CLK_EXT },
+ [JZ4780_CLK_RTCLK] = { "rtc", CGU_CLK_EXT },
+
+ /* PLLs */
+
+#define DEF_PLL(name) { \
+ .reg = CGU_REG_ ## name, \
+ .m_shift = 19, \
+ .m_bits = 13, \
+ .m_offset = 1, \
+ .n_shift = 13, \
+ .n_bits = 6, \
+ .n_offset = 1, \
+ .od_shift = 9, \
+ .od_bits = 4, \
+ .od_max = 16, \
+ .od_encoding = pll_od_encoding, \
+ .stable_bit = 6, \
+ .bypass_bit = 1, \
+ .enable_bit = 0, \
+}
+
+ [JZ4780_CLK_APLL] = {
+ "apll", CGU_CLK_PLL,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .pll = DEF_PLL(APLL),
+ },
+
+ [JZ4780_CLK_MPLL] = {
+ "mpll", CGU_CLK_PLL,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .pll = DEF_PLL(MPLL),
+ },
+
+ [JZ4780_CLK_EPLL] = {
+ "epll", CGU_CLK_PLL,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .pll = DEF_PLL(EPLL),
+ },
+
+ [JZ4780_CLK_VPLL] = {
+ "vpll", CGU_CLK_PLL,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .pll = DEF_PLL(VPLL),
+ },
+
+#undef DEF_PLL
+
+ /* Custom (SoC-specific) OTG PHY */
+
+ [JZ4780_CLK_OTGPHY] = {
+ "otg_phy", CGU_CLK_CUSTOM,
+ .parents = { -1, -1, JZ4780_CLK_EXCLK, -1 },
+ .custom = { &jz4780_otg_phy_ops },
+ },
+
+ /* Muxes & dividers */
+
+ [JZ4780_CLK_SCLKA] = {
+ "sclk_a", CGU_CLK_MUX,
+ .parents = { -1, JZ4780_CLK_APLL, JZ4780_CLK_EXCLK,
+ JZ4780_CLK_RTCLK },
+ .mux = { CGU_REG_CLOCKCONTROL, 30, 2 },
+ },
+
+ [JZ4780_CLK_CPUMUX] = {
+ "cpumux", CGU_CLK_MUX,
+ .parents = { -1, JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
+ JZ4780_CLK_EPLL },
+ .mux = { CGU_REG_CLOCKCONTROL, 28, 2 },
+ },
+
+ [JZ4780_CLK_CPU] = {
+ "cpu", CGU_CLK_DIV,
+ .parents = { JZ4780_CLK_CPUMUX, -1, -1, -1 },
+ .div = { CGU_REG_CLOCKCONTROL, 0, 4, 22, -1, -1 },
+ },
+
+ [JZ4780_CLK_L2CACHE] = {
+ "l2cache", CGU_CLK_DIV,
+ .parents = { JZ4780_CLK_CPUMUX, -1, -1, -1 },
+ .div = { CGU_REG_CLOCKCONTROL, 4, 4, -1, -1, -1 },
+ },
+
+ [JZ4780_CLK_AHB0] = {
+ "ahb0", CGU_CLK_MUX | CGU_CLK_DIV,
+ .parents = { -1, JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
+ JZ4780_CLK_EPLL },
+ .mux = { CGU_REG_CLOCKCONTROL, 26, 2 },
+ .div = { CGU_REG_CLOCKCONTROL, 8, 4, 21, -1, -1 },
+ },
+
+ [JZ4780_CLK_AHB2PMUX] = {
+ "ahb2_apb_mux", CGU_CLK_MUX,
+ .parents = { -1, JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
+ JZ4780_CLK_RTCLK },
+ .mux = { CGU_REG_CLOCKCONTROL, 24, 2 },
+ },
+
+ [JZ4780_CLK_AHB2] = {
+ "ahb2", CGU_CLK_DIV,
+ .parents = { JZ4780_CLK_AHB2PMUX, -1, -1, -1 },
+ .div = { CGU_REG_CLOCKCONTROL, 12, 4, 20, -1, -1 },
+ },
+
+ [JZ4780_CLK_PCLK] = {
+ "pclk", CGU_CLK_DIV,
+ .parents = { JZ4780_CLK_AHB2PMUX, -1, -1, -1 },
+ .div = { CGU_REG_CLOCKCONTROL, 16, 4, 20, -1, -1 },
+ },
+
+ [JZ4780_CLK_DDR] = {
+ "ddr", CGU_CLK_MUX | CGU_CLK_DIV,
+ .parents = { -1, JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL, -1 },
+ .mux = { CGU_REG_DDRCDR, 30, 2 },
+ .div = { CGU_REG_DDRCDR, 0, 4, 29, 28, 27 },
+ },
+
+ [JZ4780_CLK_VPU] = {
+ "vpu", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
+ JZ4780_CLK_EPLL, -1 },
+ .mux = { CGU_REG_VPUCDR, 30, 2 },
+ .div = { CGU_REG_VPUCDR, 0, 4, 29, 28, 27 },
+ .gate = { CGU_REG_CLKGR1, 2 },
+ },
+
+ [JZ4780_CLK_I2SPLL] = {
+ "i2s_pll", CGU_CLK_MUX | CGU_CLK_DIV,
+ .parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_EPLL, -1, -1 },
+ .mux = { CGU_REG_I2SCDR, 30, 1 },
+ .div = { CGU_REG_I2SCDR, 0, 8, 29, 28, 27 },
+ },
+
+ [JZ4780_CLK_I2S] = {
+ "i2s", CGU_CLK_MUX,
+ .parents = { JZ4780_CLK_EXCLK, JZ4780_CLK_I2SPLL, -1, -1 },
+ .mux = { CGU_REG_I2SCDR, 31, 1 },
+ },
+
+ [JZ4780_CLK_LCD0PIXCLK] = {
+ "lcd0pixclk", CGU_CLK_MUX | CGU_CLK_DIV,
+ .parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
+ JZ4780_CLK_VPLL, -1 },
+ .mux = { CGU_REG_LP0CDR, 30, 2 },
+ .div = { CGU_REG_LP0CDR, 0, 8, 28, 27, 26 },
+ },
+
+ [JZ4780_CLK_LCD1PIXCLK] = {
+ "lcd1pixclk", CGU_CLK_MUX | CGU_CLK_DIV,
+ .parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
+ JZ4780_CLK_VPLL, -1 },
+ .mux = { CGU_REG_LP1CDR, 30, 2 },
+ .div = { CGU_REG_LP1CDR, 0, 8, 28, 27, 26 },
+ },
+
+ [JZ4780_CLK_MSCMUX] = {
+ "msc_mux", CGU_CLK_MUX,
+ .parents = { -1, JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL, -1 },
+ .mux = { CGU_REG_MSC0CDR, 30, 2 },
+ },
+
+ [JZ4780_CLK_MSC0] = {
+ "msc0", CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_MSCMUX, -1, -1, -1 },
+ .div = { CGU_REG_MSC0CDR, 0, 8, 29, 28, 27 },
+ .gate = { CGU_REG_CLKGR0, 3 },
+ },
+
+ [JZ4780_CLK_MSC1] = {
+ "msc1", CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_MSCMUX, -1, -1, -1 },
+ .div = { CGU_REG_MSC1CDR, 0, 8, 29, 28, 27 },
+ .gate = { CGU_REG_CLKGR0, 11 },
+ },
+
+ [JZ4780_CLK_MSC2] = {
+ "msc2", CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_MSCMUX, -1, -1, -1 },
+ .div = { CGU_REG_MSC2CDR, 0, 8, 29, 28, 27 },
+ .gate = { CGU_REG_CLKGR0, 12 },
+ },
+
+ [JZ4780_CLK_UHC] = {
+ "uhc", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
+ JZ4780_CLK_EPLL, JZ4780_CLK_OTGPHY },
+ .mux = { CGU_REG_UHCCDR, 30, 2 },
+ .div = { CGU_REG_UHCCDR, 0, 8, 29, 28, 27 },
+ .gate = { CGU_REG_CLKGR0, 24 },
+ },
+
+ [JZ4780_CLK_SSIPLL] = {
+ "ssi_pll", CGU_CLK_MUX | CGU_CLK_DIV,
+ .parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL, -1, -1 },
+ .mux = { CGU_REG_SSICDR, 30, 1 },
+ .div = { CGU_REG_SSICDR, 0, 8, 29, 28, 27 },
+ },
+
+ [JZ4780_CLK_SSI] = {
+ "ssi", CGU_CLK_MUX,
+ .parents = { JZ4780_CLK_EXCLK, JZ4780_CLK_SSIPLL, -1, -1 },
+ .mux = { CGU_REG_SSICDR, 31, 1 },
+ },
+
+ [JZ4780_CLK_CIMMCLK] = {
+ "cim_mclk", CGU_CLK_MUX | CGU_CLK_DIV,
+ .parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL, -1, -1 },
+ .mux = { CGU_REG_CIMCDR, 31, 1 },
+ .div = { CGU_REG_CIMCDR, 0, 8, 30, 29, 28 },
+ },
+
+ [JZ4780_CLK_PCMPLL] = {
+ "pcm_pll", CGU_CLK_MUX | CGU_CLK_DIV,
+ .parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
+ JZ4780_CLK_EPLL, JZ4780_CLK_VPLL },
+ .mux = { CGU_REG_PCMCDR, 29, 2 },
+ .div = { CGU_REG_PCMCDR, 0, 8, 28, 27, 26 },
+ },
+
+ [JZ4780_CLK_PCM] = {
+ "pcm", CGU_CLK_MUX | CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, JZ4780_CLK_PCMPLL, -1, -1 },
+ .mux = { CGU_REG_PCMCDR, 31, 1 },
+ .gate = { CGU_REG_CLKGR1, 3 },
+ },
+
+ [JZ4780_CLK_GPU] = {
+ "gpu", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { -1, JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
+ JZ4780_CLK_EPLL },
+ .mux = { CGU_REG_GPUCDR, 30, 2 },
+ .div = { CGU_REG_GPUCDR, 0, 4, 29, 28, 27 },
+ .gate = { CGU_REG_CLKGR1, 4 },
+ },
+
+ [JZ4780_CLK_HDMI] = {
+ "hdmi", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
+ JZ4780_CLK_VPLL, -1 },
+ .mux = { CGU_REG_HDMICDR, 30, 2 },
+ .div = { CGU_REG_HDMICDR, 0, 8, 29, 28, 26 },
+ .gate = { CGU_REG_CLKGR1, 9 },
+ },
+
+ [JZ4780_CLK_BCH] = {
+ "bch", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+ .parents = { -1, JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
+ JZ4780_CLK_EPLL },
+ .mux = { CGU_REG_BCHCDR, 30, 2 },
+ .div = { CGU_REG_BCHCDR, 0, 4, 29, 28, 27 },
+ .gate = { CGU_REG_CLKGR0, 1 },
+ },
+
+ /* Gate-only clocks */
+
+ [JZ4780_CLK_NEMC] = {
+ "nemc", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_AHB2, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 0 },
+ },
+
+ [JZ4780_CLK_OTG0] = {
+ "otg0", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 2 },
+ },
+
+ [JZ4780_CLK_SSI0] = {
+ "ssi0", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_SSI, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 4 },
+ },
+
+ [JZ4780_CLK_SMB0] = {
+ "smb0", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_PCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 5 },
+ },
+
+ [JZ4780_CLK_SMB1] = {
+ "smb1", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_PCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 6 },
+ },
+
+ [JZ4780_CLK_SCC] = {
+ "scc", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 7 },
+ },
+
+ [JZ4780_CLK_AIC] = {
+ "aic", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 8 },
+ },
+
+ [JZ4780_CLK_TSSI0] = {
+ "tssi0", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 9 },
+ },
+
+ [JZ4780_CLK_OWI] = {
+ "owi", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 10 },
+ },
+
+ [JZ4780_CLK_KBC] = {
+ "kbc", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 13 },
+ },
+
+ [JZ4780_CLK_SADC] = {
+ "sadc", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 14 },
+ },
+
+ [JZ4780_CLK_UART0] = {
+ "uart0", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 15 },
+ },
+
+ [JZ4780_CLK_UART1] = {
+ "uart1", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 16 },
+ },
+
+ [JZ4780_CLK_UART2] = {
+ "uart2", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 17 },
+ },
+
+ [JZ4780_CLK_UART3] = {
+ "uart3", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 18 },
+ },
+
+ [JZ4780_CLK_SSI1] = {
+ "ssi1", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_SSI, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 19 },
+ },
+
+ [JZ4780_CLK_SSI2] = {
+ "ssi2", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_SSI, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 20 },
+ },
+
+ [JZ4780_CLK_PDMA] = {
+ "pdma", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 21 },
+ },
+
+ [JZ4780_CLK_GPS] = {
+ "gps", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 22 },
+ },
+
+ [JZ4780_CLK_MAC] = {
+ "mac", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 23 },
+ },
+
+ [JZ4780_CLK_SMB2] = {
+ "smb2", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_PCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 24 },
+ },
+
+ [JZ4780_CLK_CIM] = {
+ "cim", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 26 },
+ },
+
+ [JZ4780_CLK_LCD] = {
+ "lcd", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 28 },
+ },
+
+ [JZ4780_CLK_TVE] = {
+ "tve", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_LCD, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 27 },
+ },
+
+ [JZ4780_CLK_IPU] = {
+ "ipu", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 29 },
+ },
+
+ [JZ4780_CLK_DDR0] = {
+ "ddr0", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_DDR, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 30 },
+ },
+
+ [JZ4780_CLK_DDR1] = {
+ "ddr1", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_DDR, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 31 },
+ },
+
+ [JZ4780_CLK_SMB3] = {
+ "smb3", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_PCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR1, 0 },
+ },
+
+ [JZ4780_CLK_TSSI1] = {
+ "tssi1", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR1, 1 },
+ },
+
+ [JZ4780_CLK_COMPRESS] = {
+ "compress", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR1, 5 },
+ },
+
+ [JZ4780_CLK_AIC1] = {
+ "aic1", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR1, 6 },
+ },
+
+ [JZ4780_CLK_GPVLC] = {
+ "gpvlc", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR1, 7 },
+ },
+
+ [JZ4780_CLK_OTG1] = {
+ "otg1", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR1, 8 },
+ },
+
+ [JZ4780_CLK_UART4] = {
+ "uart4", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR1, 10 },
+ },
+
+ [JZ4780_CLK_AHBMON] = {
+ "ahb_mon", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR1, 11 },
+ },
+
+ [JZ4780_CLK_SMB4] = {
+ "smb4", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_PCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR1, 12 },
+ },
+
+ [JZ4780_CLK_DES] = {
+ "des", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR1, 13 },
+ },
+
+ [JZ4780_CLK_X2D] = {
+ "x2d", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR1, 14 },
+ },
+
+ [JZ4780_CLK_CORE1] = {
+ "core1", CGU_CLK_GATE,
+ .parents = { JZ4780_CLK_CPU, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR1, 15 },
+ },
+
+};
+
+static void __init jz4780_cgu_init(struct device_node *np)
+{
+ int retval;
+
+ cgu = ingenic_cgu_new(jz4780_cgu_clocks,
+ ARRAY_SIZE(jz4780_cgu_clocks), np);
+ if (!cgu) {
+ pr_err("%s: failed to initialise CGU\n", __func__);
+ return;
+ }
+
+ retval = ingenic_cgu_register_clocks(cgu);
+ if (retval) {
+ pr_err("%s: failed to register CGU Clocks\n", __func__);
+ return;
+ }
+}
+CLK_OF_DECLARE(jz4780_cgu, "ingenic,jz4780-cgu", jz4780_cgu_init);
diff --git a/drivers/cpufreq/ls1x-cpufreq.c b/drivers/cpufreq/ls1x-cpufreq.c
index f0913ee..262581b 100644
--- a/drivers/cpufreq/ls1x-cpufreq.c
+++ b/drivers/cpufreq/ls1x-cpufreq.c
@@ -17,8 +17,8 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <asm/mach-loongson1/cpufreq.h>
-#include <asm/mach-loongson1/loongson1.h>
+#include <cpufreq.h>
+#include <loongson1.h>
static struct {
struct device *dev;
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 6517132..99c69a3 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -136,6 +136,7 @@ config QCOM_SCM
bool
depends on ARM || ARM64
+source "drivers/firmware/broadcom/Kconfig"
source "drivers/firmware/google/Kconfig"
source "drivers/firmware/efi/Kconfig"
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 3001f1a..4a4b897 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_QCOM_SCM) += qcom_scm.o
obj-$(CONFIG_QCOM_SCM) += qcom_scm-32.o
CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
+obj-y += broadcom/
obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
obj-$(CONFIG_EFI) += efi/
obj-$(CONFIG_UEFI_CPER) += efi/
diff --git a/drivers/firmware/broadcom/Kconfig b/drivers/firmware/broadcom/Kconfig
new file mode 100644
index 0000000..6bed1199
--- /dev/null
+++ b/drivers/firmware/broadcom/Kconfig
@@ -0,0 +1,11 @@
+config BCM47XX_NVRAM
+ bool "Broadcom NVRAM driver"
+ depends on BCM47XX || ARCH_BCM_5301X
+ help
+ Broadcom home routers contain flash partition called "nvram" with all
+ important hardware configuration as well as some minor user setup.
+ NVRAM partition contains a text-like data representing name=value
+ pairs.
+ This driver provides an easy way to get value of requested parameter.
+ It simply reads content of NVRAM and parses it. It doesn't control any
+ hardware part itself.
diff --git a/drivers/firmware/broadcom/Makefile b/drivers/firmware/broadcom/Makefile
new file mode 100644
index 0000000..d0e6835
--- /dev/null
+++ b/drivers/firmware/broadcom/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o
diff --git a/arch/mips/bcm47xx/nvram.c b/drivers/firmware/broadcom/bcm47xx_nvram.c
index ba632ff..87add3f 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
@@ -35,6 +35,7 @@ struct nvram_header {
};
static char nvram_buf[NVRAM_SPACE];
+static size_t nvram_len;
static const u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
static u32 find_nvram_size(void __iomem *end)
@@ -60,7 +61,7 @@ static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
u32 *src, *dst;
u32 size;
- if (nvram_buf[0]) {
+ if (nvram_len) {
pr_warn("nvram already initialized\n");
return -EEXIST;
}
@@ -94,18 +95,25 @@ static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
return -ENXIO;
found:
- if (header->len > size)
- pr_err("The nvram size accoridng to the header seems to be bigger than the partition on flash\n");
- if (header->len > NVRAM_SPACE)
- pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
- header->len, NVRAM_SPACE);
-
src = (u32 *)header;
dst = (u32 *)nvram_buf;
for (i = 0; i < sizeof(struct nvram_header); i += 4)
*dst++ = __raw_readl(src++);
- for (; i < header->len && i < NVRAM_SPACE && i < size; i += 4)
+ header = (struct nvram_header *)nvram_buf;
+ nvram_len = header->len;
+ if (nvram_len > size) {
+ pr_err("The nvram size according to the header seems to be bigger than the partition on flash\n");
+ nvram_len = size;
+ }
+ if (nvram_len >= NVRAM_SPACE) {
+ pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
+ header->len, NVRAM_SPACE - 1);
+ nvram_len = NVRAM_SPACE - 1;
+ }
+ /* proceed reading data after header */
+ for (; i < nvram_len; i += 4)
*dst++ = readl(src++);
+ nvram_buf[NVRAM_SPACE - 1] = '\0';
return 0;
}
@@ -146,21 +154,18 @@ static int nvram_init(void)
return -ENODEV;
err = mtd_read(mtd, 0, sizeof(header), &bytes_read, (uint8_t *)&header);
- if (!err && header.magic == NVRAM_MAGIC) {
- u8 *dst = (uint8_t *)nvram_buf;
- size_t len = header.len;
-
- if (header.len > NVRAM_SPACE) {
+ if (!err && header.magic == NVRAM_MAGIC &&
+ header.len > sizeof(header)) {
+ nvram_len = header.len;
+ if (nvram_len >= NVRAM_SPACE) {
pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
header.len, NVRAM_SPACE);
- len = NVRAM_SPACE;
+ nvram_len = NVRAM_SPACE - 1;
}
- err = mtd_read(mtd, 0, len, &bytes_read, dst);
- if (err)
- return err;
-
- return 0;
+ err = mtd_read(mtd, 0, nvram_len, &nvram_len,
+ (u8 *)nvram_buf);
+ return err;
}
#endif
@@ -170,12 +175,12 @@ static int nvram_init(void)
int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len)
{
char *var, *value, *end, *eq;
- int data_left, err;
+ int err;
if (!name)
return -EINVAL;
- if (!nvram_buf[0]) {
+ if (!nvram_len) {
err = nvram_init();
if (err)
return err;
@@ -183,19 +188,16 @@ int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len)
/* Look for name=value and return value */
var = &nvram_buf[sizeof(struct nvram_header)];
- end = nvram_buf + sizeof(nvram_buf) - 2;
- end[0] = '\0';
- end[1] = '\0';
- for (; *var; var = value + strlen(value) + 1) {
- data_left = end - var;
-
- eq = strnchr(var, data_left, '=');
+ end = nvram_buf + sizeof(nvram_buf);
+ while (var < end && *var) {
+ eq = strchr(var, '=');
if (!eq)
break;
value = eq + 1;
if (eq - var == strlen(name) &&
strncmp(var, name, eq - var) == 0)
return snprintf(val, val_len, "%s", value);
+ var = value + strlen(value) + 1;
}
return -ENOENT;
}
@@ -221,3 +223,26 @@ int bcm47xx_nvram_gpio_pin(const char *name)
return -ENOENT;
}
EXPORT_SYMBOL(bcm47xx_nvram_gpio_pin);
+
+char *bcm47xx_nvram_get_contents(size_t *nvram_size)
+{
+ int err;
+ char *nvram;
+
+ if (!nvram_len) {
+ err = nvram_init();
+ if (err)
+ return NULL;
+ }
+
+ *nvram_size = nvram_len - sizeof(struct nvram_header);
+ nvram = vmalloc(*nvram_size);
+ if (!nvram)
+ return NULL;
+ memcpy(nvram, &nvram_buf[sizeof(struct nvram_header)], *nvram_size);
+
+ return nvram;
+}
+EXPORT_SYMBOL(bcm47xx_nvram_get_contents);
+
+MODULE_LICENSE("GPLv2");
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 8a7d780..120d815 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -86,6 +86,11 @@ config IMGPDC_IRQ
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
+config IRQ_MIPS_CPU
+ bool
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+
config CLPS711X_IRQCHIP
bool
depends on ARCH_CLPS711X
@@ -160,10 +165,15 @@ config MIPS_GIC
bool
select MIPS_CM
+config INGENIC_IRQ
+ bool
+ depends on MACH_INGENIC
+ default y
+
config RENESAS_H8300H_INTC
bool
select IRQ_DOMAIN
config RENESAS_H8S_INTC
bool
- select IRQ_DOMAIN \ No newline at end of file
+ select IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 5c9adf1..b8d4e96 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_ARM_VIC) += irq-vic.o
obj-$(CONFIG_ATMEL_AIC_IRQ) += irq-atmel-aic-common.o irq-atmel-aic.o
obj-$(CONFIG_ATMEL_AIC5_IRQ) += irq-atmel-aic-common.o irq-atmel-aic5.o
obj-$(CONFIG_IMGPDC_IRQ) += irq-imgpdc.o
+obj-$(CONFIG_IRQ_MIPS_CPU) += irq-mips-cpu.o
obj-$(CONFIG_SIRF_IRQ) += irq-sirfsoc.o
obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o
obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o
@@ -50,3 +51,4 @@ obj-$(CONFIG_ARCH_DIGICOLOR) += irq-digicolor.o
obj-$(CONFIG_RENESAS_H8300H_INTC) += irq-renesas-h8300h.o
obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o
obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
+obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o
diff --git a/drivers/irqchip/irq-ingenic.c b/drivers/irqchip/irq-ingenic.c
new file mode 100644
index 0000000..005de3f
--- /dev/null
+++ b/drivers/irqchip/irq-ingenic.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ * JZ4740 platform IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irqchip/ingenic.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/mach-jz4740/irq.h>
+
+#include "irqchip.h"
+
+struct ingenic_intc_data {
+ void __iomem *base;
+ unsigned num_chips;
+};
+
+#define JZ_REG_INTC_STATUS 0x00
+#define JZ_REG_INTC_MASK 0x04
+#define JZ_REG_INTC_SET_MASK 0x08
+#define JZ_REG_INTC_CLEAR_MASK 0x0c
+#define JZ_REG_INTC_PENDING 0x10
+#define CHIP_SIZE 0x20
+
+static irqreturn_t intc_cascade(int irq, void *data)
+{
+ struct ingenic_intc_data *intc = irq_get_handler_data(irq);
+ uint32_t irq_reg;
+ unsigned i;
+
+ for (i = 0; i < intc->num_chips; i++) {
+ irq_reg = readl(intc->base + (i * CHIP_SIZE) +
+ JZ_REG_INTC_PENDING);
+ if (!irq_reg)
+ continue;
+
+ generic_handle_irq(__fls(irq_reg) + (i * 32) + JZ4740_IRQ_BASE);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void intc_irq_set_mask(struct irq_chip_generic *gc, uint32_t mask)
+{
+ struct irq_chip_regs *regs = &gc->chip_types->regs;
+
+ writel(mask, gc->reg_base + regs->enable);
+ writel(~mask, gc->reg_base + regs->disable);
+}
+
+void ingenic_intc_irq_suspend(struct irq_data *data)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+ intc_irq_set_mask(gc, gc->wake_active);
+}
+
+void ingenic_intc_irq_resume(struct irq_data *data)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+ intc_irq_set_mask(gc, gc->mask_cache);
+}
+
+static struct irqaction intc_cascade_action = {
+ .handler = intc_cascade,
+ .name = "SoC intc cascade interrupt",
+};
+
+static int __init ingenic_intc_of_init(struct device_node *node,
+ unsigned num_chips)
+{
+ struct ingenic_intc_data *intc;
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ struct irq_domain *domain;
+ int parent_irq, err = 0;
+ unsigned i;
+
+ intc = kzalloc(sizeof(*intc), GFP_KERNEL);
+ if (!intc) {
+ err = -ENOMEM;
+ goto out_err;
+ }
+
+ parent_irq = irq_of_parse_and_map(node, 0);
+ if (!parent_irq) {
+ err = -EINVAL;
+ goto out_free;
+ }
+
+ err = irq_set_handler_data(parent_irq, intc);
+ if (err)
+ goto out_unmap_irq;
+
+ intc->num_chips = num_chips;
+ intc->base = of_iomap(node, 0);
+ if (!intc->base) {
+ err = -ENODEV;
+ goto out_unmap_irq;
+ }
+
+ for (i = 0; i < num_chips; i++) {
+ /* Mask all irqs */
+ writel(0xffffffff, intc->base + (i * CHIP_SIZE) +
+ JZ_REG_INTC_SET_MASK);
+
+ gc = irq_alloc_generic_chip("INTC", 1,
+ JZ4740_IRQ_BASE + (i * 32),
+ intc->base + (i * CHIP_SIZE),
+ handle_level_irq);
+
+ gc->wake_enabled = IRQ_MSK(32);
+
+ ct = gc->chip_types;
+ ct->regs.enable = JZ_REG_INTC_CLEAR_MASK;
+ ct->regs.disable = JZ_REG_INTC_SET_MASK;
+ ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+ ct->chip.irq_mask = irq_gc_mask_disable_reg;
+ ct->chip.irq_mask_ack = irq_gc_mask_disable_reg;
+ ct->chip.irq_set_wake = irq_gc_set_wake;
+ ct->chip.irq_suspend = ingenic_intc_irq_suspend;
+ ct->chip.irq_resume = ingenic_intc_irq_resume;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(32), 0, 0,
+ IRQ_NOPROBE | IRQ_LEVEL);
+ }
+
+ domain = irq_domain_add_legacy(node, num_chips * 32, JZ4740_IRQ_BASE, 0,
+ &irq_domain_simple_ops, NULL);
+ if (!domain)
+ pr_warn("unable to register IRQ domain\n");
+
+ setup_irq(parent_irq, &intc_cascade_action);
+ return 0;
+
+out_unmap_irq:
+ irq_dispose_mapping(parent_irq);
+out_free:
+ kfree(intc);
+out_err:
+ return err;
+}
+
+static int __init intc_1chip_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ return ingenic_intc_of_init(node, 1);
+}
+IRQCHIP_DECLARE(jz4740_intc, "ingenic,jz4740-intc", intc_1chip_of_init);
+
+static int __init intc_2chip_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ return ingenic_intc_of_init(node, 2);
+}
+IRQCHIP_DECLARE(jz4770_intc, "ingenic,jz4770-intc", intc_2chip_of_init);
+IRQCHIP_DECLARE(jz4775_intc, "ingenic,jz4775-intc", intc_2chip_of_init);
+IRQCHIP_DECLARE(jz4780_intc, "ingenic,jz4780-intc", intc_2chip_of_init);
diff --git a/arch/mips/kernel/irq_cpu.c b/drivers/irqchip/irq-mips-cpu.c
index 6eb7a3f..a43c419 100644
--- a/arch/mips/kernel/irq_cpu.c
+++ b/drivers/irqchip/irq-mips-cpu.c
@@ -38,6 +38,8 @@
#include <asm/mipsmtregs.h>
#include <asm/setup.h>
+#include "irqchip.h"
+
static inline void unmask_mips_irq(struct irq_data *d)
{
set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
@@ -167,3 +169,4 @@ int __init mips_cpu_irq_of_init(struct device_node *of_node,
__mips_cpu_irq_init(of_node);
return 0;
}
+IRQCHIP_DECLARE(cpu_intc, "mti,cpu-interrupt-controller", mips_cpu_irq_of_init);
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 487d057..c0e6ede 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -267,6 +267,13 @@ config PHY_EXYNOS5_USBDRD
This driver provides PHY interface for USB 3.0 DRD controller
present on Exynos5 SoC series.
+config PHY_PISTACHIO_USB
+ tristate "IMG Pistachio USB2.0 PHY driver"
+ depends on MACH_PISTACHIO
+ select GENERIC_PHY
+ help
+ Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
+
config PHY_QCOM_APQ8064_SATA
tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
depends on ARCH_QCOM
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 42f58e9..f344e1b 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -44,3 +44,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
+obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
diff --git a/drivers/phy/phy-pistachio-usb.c b/drivers/phy/phy-pistachio-usb.c
new file mode 100644
index 0000000..c6db35e
--- /dev/null
+++ b/drivers/phy/phy-pistachio-usb.c
@@ -0,0 +1,206 @@
+/*
+ * IMG Pistachio USB PHY driver
+ *
+ * Copyright (C) 2015 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/phy/phy-pistachio-usb.h>
+
+#define USB_PHY_CONTROL1 0x04
+#define USB_PHY_CONTROL1_FSEL_SHIFT 2
+#define USB_PHY_CONTROL1_FSEL_MASK 0x7
+
+#define USB_PHY_STRAP_CONTROL 0x10
+#define USB_PHY_STRAP_CONTROL_REFCLK_SHIFT 4
+#define USB_PHY_STRAP_CONTROL_REFCLK_MASK 0x3
+
+#define USB_PHY_STATUS 0x14
+#define USB_PHY_STATUS_RX_PHY_CLK BIT(9)
+#define USB_PHY_STATUS_RX_UTMI_CLK BIT(8)
+#define USB_PHY_STATUS_VBUS_FAULT BIT(7)
+
+struct pistachio_usb_phy {
+ struct device *dev;
+ struct regmap *cr_top;
+ struct clk *phy_clk;
+ unsigned int refclk;
+};
+
+static const unsigned long fsel_rate_map[] = {
+ 9600000,
+ 10000000,
+ 12000000,
+ 19200000,
+ 20000000,
+ 24000000,
+ 0,
+ 50000000,
+};
+
+static int pistachio_usb_phy_power_on(struct phy *phy)
+{
+ struct pistachio_usb_phy *p_phy = phy_get_drvdata(phy);
+ unsigned long timeout, rate;
+ unsigned int i;
+ int ret;
+
+ ret = clk_prepare_enable(p_phy->phy_clk);
+ if (ret < 0) {
+ dev_err(p_phy->dev, "Failed to enable PHY clock: %d\n", ret);
+ return ret;
+ }
+
+ regmap_update_bits(p_phy->cr_top, USB_PHY_STRAP_CONTROL,
+ USB_PHY_STRAP_CONTROL_REFCLK_MASK <<
+ USB_PHY_STRAP_CONTROL_REFCLK_SHIFT,
+ p_phy->refclk << USB_PHY_STRAP_CONTROL_REFCLK_SHIFT);
+
+ rate = clk_get_rate(p_phy->phy_clk);
+ if (p_phy->refclk == REFCLK_XO_CRYSTAL && rate != 12000000) {
+ dev_err(p_phy->dev, "Unsupported rate for XO crystal: %ld\n",
+ rate);
+ ret = -EINVAL;
+ goto disable_clk;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(fsel_rate_map); i++) {
+ if (rate == fsel_rate_map[i])
+ break;
+ }
+ if (i == ARRAY_SIZE(fsel_rate_map)) {
+ dev_err(p_phy->dev, "Unsupported clock rate: %lu\n", rate);
+ ret = -EINVAL;
+ goto disable_clk;
+ }
+
+ regmap_update_bits(p_phy->cr_top, USB_PHY_CONTROL1,
+ USB_PHY_CONTROL1_FSEL_MASK <<
+ USB_PHY_CONTROL1_FSEL_SHIFT,
+ i << USB_PHY_CONTROL1_FSEL_SHIFT);
+
+ timeout = jiffies + msecs_to_jiffies(200);
+ while (time_before(jiffies, timeout)) {
+ unsigned int val;
+
+ regmap_read(p_phy->cr_top, USB_PHY_STATUS, &val);
+ if (val & USB_PHY_STATUS_VBUS_FAULT) {
+ dev_err(p_phy->dev, "VBUS fault detected\n");
+ ret = -EIO;
+ goto disable_clk;
+ }
+ if ((val & USB_PHY_STATUS_RX_PHY_CLK) &&
+ (val & USB_PHY_STATUS_RX_UTMI_CLK))
+ return 0;
+ usleep_range(1000, 1500);
+ }
+
+ dev_err(p_phy->dev, "Timed out waiting for PHY to power on\n");
+ ret = -ETIMEDOUT;
+
+disable_clk:
+ clk_disable_unprepare(p_phy->phy_clk);
+ return ret;
+}
+
+static int pistachio_usb_phy_power_off(struct phy *phy)
+{
+ struct pistachio_usb_phy *p_phy = phy_get_drvdata(phy);
+
+ clk_disable_unprepare(p_phy->phy_clk);
+
+ return 0;
+}
+
+static const struct phy_ops pistachio_usb_phy_ops = {
+ .power_on = pistachio_usb_phy_power_on,
+ .power_off = pistachio_usb_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int pistachio_usb_phy_probe(struct platform_device *pdev)
+{
+ struct pistachio_usb_phy *p_phy;
+ struct phy_provider *provider;
+ struct phy *phy;
+ int ret;
+
+ p_phy = devm_kzalloc(&pdev->dev, sizeof(*p_phy), GFP_KERNEL);
+ if (!p_phy)
+ return -ENOMEM;
+ p_phy->dev = &pdev->dev;
+ platform_set_drvdata(pdev, p_phy);
+
+ p_phy->cr_top = syscon_regmap_lookup_by_phandle(p_phy->dev->of_node,
+ "img,cr-top");
+ if (IS_ERR(p_phy->cr_top)) {
+ dev_err(p_phy->dev, "Failed to get CR_TOP registers: %ld\n",
+ PTR_ERR(p_phy->cr_top));
+ return PTR_ERR(p_phy->cr_top);
+ }
+
+ p_phy->phy_clk = devm_clk_get(p_phy->dev, "usb_phy");
+ if (IS_ERR(p_phy->phy_clk)) {
+ dev_err(p_phy->dev, "Failed to get usb_phy clock: %ld\n",
+ PTR_ERR(p_phy->phy_clk));
+ return PTR_ERR(p_phy->phy_clk);
+ }
+
+ ret = of_property_read_u32(p_phy->dev->of_node, "img,refclk",
+ &p_phy->refclk);
+ if (ret < 0) {
+ dev_err(p_phy->dev, "No reference clock selector specified\n");
+ return ret;
+ }
+
+ phy = devm_phy_create(p_phy->dev, NULL, &pistachio_usb_phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(p_phy->dev, "Failed to create PHY: %ld\n",
+ PTR_ERR(phy));
+ return PTR_ERR(phy);
+ }
+ phy_set_drvdata(phy, p_phy);
+
+ provider = devm_of_phy_provider_register(p_phy->dev,
+ of_phy_simple_xlate);
+ if (IS_ERR(provider)) {
+ dev_err(p_phy->dev, "Failed to register PHY provider: %ld\n",
+ PTR_ERR(provider));
+ return PTR_ERR(provider);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id pistachio_usb_phy_of_match[] = {
+ { .compatible = "img,pistachio-usb-phy", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, pistachio_usb_phy_of_match);
+
+static struct platform_driver pistachio_usb_phy_driver = {
+ .probe = pistachio_usb_phy_probe,
+ .driver = {
+ .name = "pistachio-usb-phy",
+ .of_match_table = pistachio_usb_phy_of_match,
+ },
+};
+module_platform_driver(pistachio_usb_phy_driver);
+
+MODULE_AUTHOR("Andrew Bresticker <abrestic@chromium.org>");
+MODULE_DESCRIPTION("IMG Pistachio USB2.0 PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index db2fe4a..83b4b89 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1503,7 +1503,7 @@ config RTC_DRV_PUV3
config RTC_DRV_LOONGSON1
tristate "loongson1 RTC support"
- depends on MACH_LOONGSON1
+ depends on MACH_LOONGSON32
help
This is a driver for the loongson1 on-chip Counter0 (Time-Of-Year
counter) to be used as a RTC.
diff --git a/drivers/rtc/rtc-ls1x.c b/drivers/rtc/rtc-ls1x.c
index 8445e56..22a9ec4 100644
--- a/drivers/rtc/rtc-ls1x.c
+++ b/drivers/rtc/rtc-ls1x.c
@@ -17,7 +17,7 @@
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/io.h>
-#include <asm/mach-loongson1/loongson1.h>
+#include <loongson1.h>
#define LS1X_RTC_REG_OFFSET (LS1X_RTC_BASE + 0x20)
#define LS1X_RTC_REGS(x) \
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
new file mode 100644
index 0000000..21bf81f
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -0,0 +1,266 @@
+/*
+ * Copyright (C) 2010 Lars-Peter Clausen <lars@metafoo.de>
+ * Copyright (C) 2015 Imagination Technologies
+ *
+ * Ingenic SoC UART support
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/io.h>
+#include <linux/libfdt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+struct ingenic_uart_data {
+ struct clk *clk_module;
+ struct clk *clk_baud;
+ int line;
+};
+
+#define UART_FCR_UME BIT(4)
+
+static struct earlycon_device *early_device;
+
+static uint8_t __init early_in(struct uart_port *port, int offset)
+{
+ return readl(port->membase + (offset << 2));
+}
+
+static void __init early_out(struct uart_port *port, int offset, uint8_t value)
+{
+ writel(value, port->membase + (offset << 2));
+}
+
+static void __init ingenic_early_console_putc(struct uart_port *port, int c)
+{
+ uint8_t lsr;
+
+ do {
+ lsr = early_in(port, UART_LSR);
+ } while ((lsr & UART_LSR_TEMT) == 0);
+
+ early_out(port, UART_TX, c);
+}
+
+static void __init ingenic_early_console_write(struct console *console,
+ const char *s, unsigned int count)
+{
+ uart_console_write(&early_device->port, s, count,
+ ingenic_early_console_putc);
+}
+
+static void __init ingenic_early_console_setup_clock(struct earlycon_device *dev)
+{
+ void *fdt = initial_boot_params;
+ const __be32 *prop;
+ int offset;
+
+ offset = fdt_path_offset(fdt, "/ext");
+ if (offset < 0)
+ return;
+
+ prop = fdt_getprop(fdt, offset, "clock-frequency", NULL);
+ if (!prop)
+ return;
+
+ dev->port.uartclk = be32_to_cpup(prop);
+}
+
+static int __init ingenic_early_console_setup(struct earlycon_device *dev,
+ const char *opt)
+{
+ struct uart_port *port = &dev->port;
+ unsigned int baud, divisor;
+
+ if (!dev->port.membase)
+ return -ENODEV;
+
+ ingenic_early_console_setup_clock(dev);
+
+ baud = dev->baud ?: 115200;
+ divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * baud);
+
+ early_out(port, UART_IER, 0);
+ early_out(port, UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8);
+ early_out(port, UART_DLL, 0);
+ early_out(port, UART_DLM, 0);
+ early_out(port, UART_LCR, UART_LCR_WLEN8);
+ early_out(port, UART_FCR, UART_FCR_UME | UART_FCR_CLEAR_XMIT |
+ UART_FCR_CLEAR_RCVR | UART_FCR_ENABLE_FIFO);
+ early_out(port, UART_MCR, UART_MCR_RTS | UART_MCR_DTR);
+
+ early_out(port, UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8);
+ early_out(port, UART_DLL, divisor & 0xff);
+ early_out(port, UART_DLM, (divisor >> 8) & 0xff);
+ early_out(port, UART_LCR, UART_LCR_WLEN8);
+
+ early_device = dev;
+ dev->con->write = ingenic_early_console_write;
+
+ return 0;
+}
+
+EARLYCON_DECLARE(jz4740_uart, ingenic_early_console_setup);
+OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart",
+ ingenic_early_console_setup);
+
+EARLYCON_DECLARE(jz4775_uart, ingenic_early_console_setup);
+OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart",
+ ingenic_early_console_setup);
+
+EARLYCON_DECLARE(jz4780_uart, ingenic_early_console_setup);
+OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart",
+ ingenic_early_console_setup);
+
+static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
+{
+ switch (offset) {
+ case UART_FCR:
+ /* UART module enable */
+ value |= UART_FCR_UME;
+ break;
+
+ case UART_IER:
+ value |= (value & 0x4) << 2;
+ break;
+
+ default:
+ break;
+ }
+
+ writeb(value, p->membase + (offset << p->regshift));
+}
+
+static int ingenic_uart_probe(struct platform_device *pdev)
+{
+ struct uart_8250_port uart = {};
+ struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ struct ingenic_uart_data *data;
+ int err, line;
+
+ if (!regs || !irq) {
+ dev_err(&pdev->dev, "no registers/irq defined\n");
+ return -EINVAL;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ spin_lock_init(&uart.port.lock);
+ uart.port.type = PORT_16550;
+ uart.port.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.mapbase = regs->start;
+ uart.port.regshift = 2;
+ uart.port.serial_out = ingenic_uart_serial_out;
+ uart.port.irq = irq->start;
+ uart.port.dev = &pdev->dev;
+
+ /* Check for a fixed line number */
+ line = of_alias_get_id(pdev->dev.of_node, "serial");
+ if (line >= 0)
+ uart.port.line = line;
+
+ uart.port.membase = devm_ioremap(&pdev->dev, regs->start,
+ resource_size(regs));
+ if (!uart.port.membase)
+ return -ENOMEM;
+
+ data->clk_module = devm_clk_get(&pdev->dev, "module");
+ if (IS_ERR(data->clk_module)) {
+ err = PTR_ERR(data->clk_module);
+ if (err != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "unable to get module clock: %d\n", err);
+ return err;
+ }
+
+ data->clk_baud = devm_clk_get(&pdev->dev, "baud");
+ if (IS_ERR(data->clk_baud)) {
+ err = PTR_ERR(data->clk_baud);
+ if (err != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "unable to get baud clock: %d\n", err);
+ return err;
+ }
+
+ err = clk_prepare_enable(data->clk_module);
+ if (err) {
+ dev_err(&pdev->dev, "could not enable module clock: %d\n", err);
+ goto out;
+ }
+
+ err = clk_prepare_enable(data->clk_baud);
+ if (err) {
+ dev_err(&pdev->dev, "could not enable baud clock: %d\n", err);
+ goto out_disable_moduleclk;
+ }
+ uart.port.uartclk = clk_get_rate(data->clk_baud);
+
+ data->line = serial8250_register_8250_port(&uart);
+ if (data->line < 0) {
+ err = data->line;
+ goto out_disable_baudclk;
+ }
+
+ platform_set_drvdata(pdev, data);
+ return 0;
+
+out_disable_baudclk:
+ clk_disable_unprepare(data->clk_baud);
+out_disable_moduleclk:
+ clk_disable_unprepare(data->clk_module);
+out:
+ return err;
+}
+
+static int ingenic_uart_remove(struct platform_device *pdev)
+{
+ struct ingenic_uart_data *data = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(data->line);
+ clk_disable_unprepare(data->clk_module);
+ clk_disable_unprepare(data->clk_baud);
+ return 0;
+}
+
+static const struct of_device_id of_match[] = {
+ { .compatible = "ingenic,jz4740-uart" },
+ { .compatible = "ingenic,jz4775-uart" },
+ { .compatible = "ingenic,jz4780-uart" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_match);
+
+static struct platform_driver ingenic_uart_platform_driver = {
+ .driver = {
+ .name = "ingenic-uart",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match,
+ },
+ .probe = ingenic_uart_probe,
+ .remove = ingenic_uart_remove,
+};
+
+module_platform_driver(ingenic_uart_platform_driver);
+
+MODULE_AUTHOR("Paul Burton");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Ingenic SoC UART driver");
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index a74a8e4..e1de118 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -357,3 +357,12 @@ config SERIAL_8250_UNIPHIER
help
If you have a UniPhier based board and want to use the on-chip
serial ports, say Y to this option. If unsure, say N.
+
+config SERIAL_8250_INGENIC
+ bool "Support for Ingenic SoC serial ports"
+ depends on SERIAL_8250_CONSOLE && OF_FLATTREE
+ select LIBFDT
+ select SERIAL_EARLYCON
+ help
+ If you have a system using an Ingenic SoC and wish to make use of
+ its UARTs, say Y to this option. If unsure, say N.
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 6fa22ff..7062959 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -25,3 +25,6 @@ obj-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o
obj-$(CONFIG_SERIAL_8250_LPC18XX) += 8250_lpc18xx.o
obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o
obj-$(CONFIG_SERIAL_8250_UNIPHIER) += 8250_uniphier.o
+obj-$(CONFIG_SERIAL_8250_INGENIC) += 8250_ingenic.o
+
+CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index 1c479103..2847108 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -462,6 +462,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
/* v: May be registered for frame buffer console restore */
NULL, /* v */
&sysrq_showstate_blocked_op, /* w */
+ /* x: May be registered on mips for TLB dump */
/* x: May be registered on ppc/powerpc for xmon */
/* x: May be registered on sparc64 for global PMU dump */
NULL, /* x */
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 547cee8..8afc3c1 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -295,7 +295,7 @@ config USB_OCTEON_EHCI
bool "Octeon on-chip EHCI support (DEPRECATED)"
depends on CAVIUM_OCTEON_SOC
default n
- select USB_EHCI_BIG_ENDIAN_MMIO
+ select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
select USB_EHCI_HCD_PLATFORM
help
This option is deprecated now and the driver was removed, use
@@ -568,7 +568,7 @@ config USB_OCTEON_OHCI
bool "Octeon on-chip OHCI support (DEPRECATED)"
depends on CAVIUM_OCTEON_SOC
default USB_OCTEON_EHCI
- select USB_OHCI_BIG_ENDIAN_MMIO
+ select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
select USB_OHCI_LITTLE_ENDIAN
select USB_OHCI_HCD_PLATFORM
help
diff --git a/include/dt-bindings/clock/jz4740-cgu.h b/include/dt-bindings/clock/jz4740-cgu.h
new file mode 100644
index 0000000..43153d3
--- /dev/null
+++ b/include/dt-bindings/clock/jz4740-cgu.h
@@ -0,0 +1,37 @@
+/*
+ * This header provides clock numbers for the ingenic,jz4740-cgu DT binding.
+ *
+ * They are roughly ordered as:
+ * - external clocks
+ * - PLLs
+ * - muxes/dividers in the order they appear in the jz4740 programmers manual
+ * - gates in order of their bit in the CLKGR* registers
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_JZ4740_CGU_H__
+#define __DT_BINDINGS_CLOCK_JZ4740_CGU_H__
+
+#define JZ4740_CLK_EXT 0
+#define JZ4740_CLK_RTC 1
+#define JZ4740_CLK_PLL 2
+#define JZ4740_CLK_PLL_HALF 3
+#define JZ4740_CLK_CCLK 4
+#define JZ4740_CLK_HCLK 5
+#define JZ4740_CLK_PCLK 6
+#define JZ4740_CLK_MCLK 7
+#define JZ4740_CLK_LCD 8
+#define JZ4740_CLK_LCD_PCLK 9
+#define JZ4740_CLK_I2S 10
+#define JZ4740_CLK_SPI 11
+#define JZ4740_CLK_MMC 12
+#define JZ4740_CLK_UHC 13
+#define JZ4740_CLK_UDC 14
+#define JZ4740_CLK_UART0 15
+#define JZ4740_CLK_UART1 16
+#define JZ4740_CLK_DMA 17
+#define JZ4740_CLK_IPU 18
+#define JZ4740_CLK_ADC 19
+#define JZ4740_CLK_I2C 20
+#define JZ4740_CLK_AIC 21
+
+#endif /* __DT_BINDINGS_CLOCK_JZ4740_CGU_H__ */
diff --git a/include/dt-bindings/clock/jz4780-cgu.h b/include/dt-bindings/clock/jz4780-cgu.h
new file mode 100644
index 0000000..467165e
--- /dev/null
+++ b/include/dt-bindings/clock/jz4780-cgu.h
@@ -0,0 +1,88 @@
+/*
+ * This header provides clock numbers for the ingenic,jz4780-cgu DT binding.
+ *
+ * They are roughly ordered as:
+ * - external clocks
+ * - PLLs
+ * - muxes/dividers in the order they appear in the jz4780 programmers manual
+ * - gates in order of their bit in the CLKGR* registers
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_JZ4780_CGU_H__
+#define __DT_BINDINGS_CLOCK_JZ4780_CGU_H__
+
+#define JZ4780_CLK_EXCLK 0
+#define JZ4780_CLK_RTCLK 1
+#define JZ4780_CLK_APLL 2
+#define JZ4780_CLK_MPLL 3
+#define JZ4780_CLK_EPLL 4
+#define JZ4780_CLK_VPLL 5
+#define JZ4780_CLK_OTGPHY 6
+#define JZ4780_CLK_SCLKA 7
+#define JZ4780_CLK_CPUMUX 8
+#define JZ4780_CLK_CPU 9
+#define JZ4780_CLK_L2CACHE 10
+#define JZ4780_CLK_AHB0 11
+#define JZ4780_CLK_AHB2PMUX 12
+#define JZ4780_CLK_AHB2 13
+#define JZ4780_CLK_PCLK 14
+#define JZ4780_CLK_DDR 15
+#define JZ4780_CLK_VPU 16
+#define JZ4780_CLK_I2SPLL 17
+#define JZ4780_CLK_I2S 18
+#define JZ4780_CLK_LCD0PIXCLK 19
+#define JZ4780_CLK_LCD1PIXCLK 20
+#define JZ4780_CLK_MSCMUX 21
+#define JZ4780_CLK_MSC0 22
+#define JZ4780_CLK_MSC1 23
+#define JZ4780_CLK_MSC2 24
+#define JZ4780_CLK_UHC 25
+#define JZ4780_CLK_SSIPLL 26
+#define JZ4780_CLK_SSI 27
+#define JZ4780_CLK_CIMMCLK 28
+#define JZ4780_CLK_PCMPLL 29
+#define JZ4780_CLK_PCM 30
+#define JZ4780_CLK_GPU 31
+#define JZ4780_CLK_HDMI 32
+#define JZ4780_CLK_BCH 33
+#define JZ4780_CLK_NEMC 34
+#define JZ4780_CLK_OTG0 35
+#define JZ4780_CLK_SSI0 36
+#define JZ4780_CLK_SMB0 37
+#define JZ4780_CLK_SMB1 38
+#define JZ4780_CLK_SCC 39
+#define JZ4780_CLK_AIC 40
+#define JZ4780_CLK_TSSI0 41
+#define JZ4780_CLK_OWI 42
+#define JZ4780_CLK_KBC 43
+#define JZ4780_CLK_SADC 44
+#define JZ4780_CLK_UART0 45
+#define JZ4780_CLK_UART1 46
+#define JZ4780_CLK_UART2 47
+#define JZ4780_CLK_UART3 48
+#define JZ4780_CLK_SSI1 49
+#define JZ4780_CLK_SSI2 50
+#define JZ4780_CLK_PDMA 51
+#define JZ4780_CLK_GPS 52
+#define JZ4780_CLK_MAC 53
+#define JZ4780_CLK_SMB2 54
+#define JZ4780_CLK_CIM 55
+#define JZ4780_CLK_LCD 56
+#define JZ4780_CLK_TVE 57
+#define JZ4780_CLK_IPU 58
+#define JZ4780_CLK_DDR0 59
+#define JZ4780_CLK_DDR1 60
+#define JZ4780_CLK_SMB3 61
+#define JZ4780_CLK_TSSI1 62
+#define JZ4780_CLK_COMPRESS 63
+#define JZ4780_CLK_AIC1 64
+#define JZ4780_CLK_GPVLC 65
+#define JZ4780_CLK_OTG1 66
+#define JZ4780_CLK_UART4 67
+#define JZ4780_CLK_AHBMON 68
+#define JZ4780_CLK_SMB4 69
+#define JZ4780_CLK_DES 70
+#define JZ4780_CLK_X2D 71
+#define JZ4780_CLK_CORE1 72
+
+#endif /* __DT_BINDINGS_CLOCK_JZ4780_CGU_H__ */
diff --git a/include/dt-bindings/phy/phy-pistachio-usb.h b/include/dt-bindings/phy/phy-pistachio-usb.h
new file mode 100644
index 0000000..d1877aa
--- /dev/null
+++ b/include/dt-bindings/phy/phy-pistachio-usb.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2015 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#ifndef _DT_BINDINGS_PHY_PISTACHIO
+#define _DT_BINDINGS_PHY_PISTACHIO
+
+#define REFCLK_XO_CRYSTAL 0x0
+#define REFCLK_X0_EXT_CLK 0x1
+#define REFCLK_CLK_CORE 0x2
+
+#endif /* _DT_BINDINGS_PHY_PISTACHIO */
diff --git a/include/linux/bcm47xx_nvram.h b/include/linux/bcm47xx_nvram.h
index b12b07e..2793652 100644
--- a/include/linux/bcm47xx_nvram.h
+++ b/include/linux/bcm47xx_nvram.h
@@ -10,11 +10,17 @@
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/vmalloc.h>
-#ifdef CONFIG_BCM47XX
+#ifdef CONFIG_BCM47XX_NVRAM
int bcm47xx_nvram_init_from_mem(u32 base, u32 lim);
int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len);
int bcm47xx_nvram_gpio_pin(const char *name);
+char *bcm47xx_nvram_get_contents(size_t *val_len);
+static inline void bcm47xx_nvram_release_contents(char *nvram)
+{
+ vfree(nvram);
+};
#else
static inline int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
{
@@ -29,6 +35,15 @@ static inline int bcm47xx_nvram_gpio_pin(const char *name)
{
return -ENOTSUPP;
};
+
+static inline char *bcm47xx_nvram_get_contents(size_t *val_len)
+{
+ return NULL;
+};
+
+static inline void bcm47xx_nvram_release_contents(char *nvram)
+{
+};
#endif
#endif /* __BCM47XX_NVRAM_H */
diff --git a/arch/mips/jz4740/irq.h b/include/linux/irqchip/ingenic.h
index 0f48720..0ee319a 100644
--- a/arch/mips/jz4740/irq.h
+++ b/include/linux/irqchip/ingenic.h
@@ -12,12 +12,12 @@
*
*/
-#ifndef __MIPS_JZ4740_IRQ_H__
-#define __MIPS_JZ4740_IRQ_H__
+#ifndef __LINUX_IRQCHIP_INGENIC_H__
+#define __LINUX_IRQCHIP_INGENIC_H__
#include <linux/irq.h>
-extern void jz4740_irq_suspend(struct irq_data *data);
-extern void jz4740_irq_resume(struct irq_data *data);
+extern void ingenic_intc_irq_suspend(struct irq_data *data);
+extern void ingenic_intc_irq_resume(struct irq_data *data);
#endif
diff --git a/include/linux/platform_data/gpio-ath79.h b/include/linux/platform_data/gpio-ath79.h
new file mode 100644
index 0000000..88b0db7
--- /dev/null
+++ b/include/linux/platform_data/gpio-ath79.h
@@ -0,0 +1,19 @@
+/*
+ * Atheros AR7XXX/AR9XXX GPIO controller platform data
+ *
+ * Copyright (C) 2015 Alban Bedel <albeu@free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_GPIO_ATH79_H
+#define __LINUX_PLATFORM_DATA_GPIO_ATH79_H
+
+struct ath79_gpio_platform_data {
+ unsigned ngpios;
+ bool oe_inverted;
+};
+
+#endif
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 4568a5c..c3d1a52 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -29,10 +29,13 @@ struct ssb_sprom {
u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */
u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */
u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */
+ u8 et2mac[6] __aligned(sizeof(u16)); /* MAC address for extra Ethernet */
u8 et0phyaddr; /* MII address for enet0 */
u8 et1phyaddr; /* MII address for enet1 */
+ u8 et2phyaddr; /* MII address for enet2 */
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
+ u8 et2mdcport; /* MDIO for enet2 */
u16 dev_id; /* Device ID overriding e.g. PCI ID */
u16 board_rev; /* Board revision number from SPROM. */
u16 board_num; /* Board number from SPROM. */
@@ -88,11 +91,14 @@ struct ssb_sprom {
u32 ofdm5glpo; /* 5.2GHz OFDM power offset */
u32 ofdm5gpo; /* 5.3GHz OFDM power offset */
u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */
+ u32 boardflags;
+ u32 boardflags2;
+ u32 boardflags3;
+ /* TODO: Switch all drivers to new u32 fields and drop below ones */
u16 boardflags_lo; /* Board flags (bits 0-15) */
u16 boardflags_hi; /* Board flags (bits 16-31) */
u16 boardflags2_lo; /* Board flags (bits 32-47) */
u16 boardflags2_hi; /* Board flags (bits 48-63) */
- /* TODO store board flags in a single u64 */
struct ssb_sprom_core_pwr_info core_pwr_info[4];
OpenPOWER on IntegriCloud