diff options
86 files changed, 11428 insertions, 722 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic,scpi.txt b/Documentation/devicetree/bindings/arm/amlogic,scpi.txt new file mode 100644 index 0000000..7b9a861 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic,scpi.txt @@ -0,0 +1,20 @@ +System Control and Power Interface (SCPI) Message Protocol +(in addition to the standard binding in [0]) +---------------------------------------------------------- +Required properties + +- compatible : should be "amlogic,meson-gxbb-scpi" + +AMLOGIC SRAM and Shared Memory for SCPI +------------------------------------ + +Required properties: +- compatible : should be "amlogic,meson-gxbb-sram" + +Each sub-node represents the reserved area for SCPI. + +Required sub-node properties: +- compatible : should be "amlogic,meson-gxbb-scp-shmem" for SRAM based shared + memory on Amlogic GXBB SoC. + +[0] Documentation/devicetree/bindings/arm/arm,scpi.txt diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt index faa4b44..4018319 100644 --- a/Documentation/devicetree/bindings/arm/arm,scpi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt @@ -7,7 +7,10 @@ by Linux to initiate various system control and power operations. Required properties: -- compatible : should be "arm,scpi" +- compatible : should be + * "arm,scpi" : For implementations complying to SCPI v1.0 or above + * "arm,scpi-pre-1.0" : For implementations complying to all + unversioned releases prior to SCPI v1.0 - mboxes: List of phandle and mailbox channel specifiers All the channels reserved by remote SCP firmware for use by SCPI message protocol should be specified in any order @@ -59,18 +62,14 @@ SRAM and Shared Memory for SCPI A small area of SRAM is reserved for SCPI communication between application processors and SCP. -Required properties: -- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno - -The rest of the properties should follow the generic mmio-sram description -found in ../../sram/sram.txt +The properties should follow the generic mmio-sram description found in [3] Each sub-node represents the reserved area for SCPI. Required sub-node properties: - reg : The base offset and size of the reserved area with the SRAM -- compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based - shared memory on Juno platforms +- compatible : should be "arm,scp-shmem" for Non-secure SRAM based + shared memory Sensor bindings for the sensors based on SCPI Message Protocol -------------------------------------------------------------- @@ -81,11 +80,9 @@ Required properties: - #thermal-sensor-cells: should be set to 1. This property follows the thermal device tree bindings[2]. - Valid cell values are raw identifiers (Sensor - ID) as used by the firmware. Refer to - platform documentation for your - implementation for the IDs to use. For Juno - R0 and Juno R1 refer to [3]. + Valid cell values are raw identifiers (Sensor ID) + as used by the firmware. Refer to platform details + for your implementation for the IDs to use. Power domain bindings for the power domains based on SCPI Message Protocol ------------------------------------------------------------ @@ -112,7 +109,7 @@ Required properties: [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html [1] Documentation/devicetree/bindings/clock/clock-bindings.txt [2] Documentation/devicetree/bindings/thermal/thermal.txt -[3] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html +[3] Documentation/devicetree/bindings/sram/sram.txt [4] Documentation/devicetree/bindings/power/power_domain.txt Example: diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index e1f5ad8..29737b9 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -225,3 +225,19 @@ required properties: compatible = "atmel,sama5d3-sfr", "syscon"; reg = <0xf0038000 0x60>; }; + +Security Module (SECUMOD) + +The Security Module macrocell provides all necessary secure functions to avoid +voltage, temperature, frequency and mechanical attacks on the chip. It also +embeds secure memories that can be scrambled + +required properties: +- compatible: Should be "atmel,<chip>-secumod", "syscon". + <chip> can be "sama5d2". +- reg: Should contain registers location and length + + secumod@fc040000 { + compatible = "atmel,sama5d2-secumod", "syscon"; + reg = <0xfc040000 0x100>; + }; diff --git a/Documentation/devicetree/bindings/arm/juno,scpi.txt b/Documentation/devicetree/bindings/arm/juno,scpi.txt new file mode 100644 index 0000000..2ace869 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/juno,scpi.txt @@ -0,0 +1,26 @@ +System Control and Power Interface (SCPI) Message Protocol +(in addition to the standard binding in [0]) + +Juno SRAM and Shared Memory for SCPI +------------------------------------ + +Required properties: +- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM + +Each sub-node represents the reserved area for SCPI. + +Required sub-node properties: +- reg : The base offset and size of the reserved area with the SRAM +- compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based + shared memory on Juno platforms + +Sensor bindings for the sensors based on SCPI Message Protocol +-------------------------------------------------------------- +Required properties: +- compatible : should be "arm,scpi-sensors". +- #thermal-sensor-cells: should be set to 1. + For Juno R0 and Juno R1 refer to [1] for the + sensor identifiers + +[0] Documentation/devicetree/bindings/arm/arm,scpi.txt +[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt b/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt new file mode 100644 index 0000000..31f5f9a10 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt @@ -0,0 +1,81 @@ +Texas Instruments System Control Interface (TI-SCI) Message Protocol +-------------------------------------------------------------------- + +Texas Instrument's processors including those belonging to Keystone generation +of processors have separate hardware entity which is now responsible for the +management of the System on Chip (SoC) system. These include various system +level functions as well. + +An example of such an SoC is K2G, which contains the system control hardware +block called Power Management Micro Controller (PMMC). This hardware block is +initialized early into boot process and provides services to Operating Systems +on multiple processors including ones running Linux. + +See http://processors.wiki.ti.com/index.php/TISCI for protocol definition. + +TI-SCI controller Device Node: +============================= + +The TI-SCI node describes the Texas Instrument's System Controller entity node. +This parent node may optionally have additional children nodes which describe +specific functionality such as clocks, power domain, reset or additional +functionality as may be required for the SoC. This hierarchy also describes the +relationship between the TI-SCI parent node to the child node. + +Required properties: +------------------- +- compatible: should be "ti,k2g-sci" +- mbox-names: + "rx" - Mailbox corresponding to receive path + "tx" - Mailbox corresponding to transmit path + +- mboxes: Mailboxes corresponding to the mbox-names. Each value of the mboxes + property should contain a phandle to the mailbox controller device + node and an args specifier that will be the phandle to the intended + sub-mailbox child node to be used for communication. + +See Documentation/devicetree/bindings/mailbox/mailbox.txt for more details +about the generic mailbox controller and client driver bindings. Also see +Documentation/devicetree/bindings/mailbox/ti,message-manager.txt for typical +controller that is used to communicate with this System controllers. + +Optional Properties: +------------------- +- reg-names: + debug_messages - Map the Debug message region +- reg: register space corresponding to the debug_messages +- ti,system-reboot-controller: If system reboot can be triggered by SoC reboot + +Example (K2G): +------------- + pmmc: pmmc { + compatible = "ti,k2g-sci"; + mbox-names = "rx", "tx"; + mboxes= <&msgmgr &msgmgr_proxy_pmmc_rx>, + <&msgmgr &msgmgr_proxy_pmmc_tx>; + reg-names = "debug_messages"; + reg = <0x02921800 0x800>; + }; + + +TI-SCI Client Device Node: +========================= + +Client nodes are maintained as children of the relevant TI-SCI device node. + +Example (K2G): +------------- + pmmc: pmmc { + compatible = "ti,k2g-sci"; + ... + + my_clk_node: clk_node { + ... + ... + }; + + my_pd_node: pd_node { + ... + ... + }; + }; diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index 5d8229d..253bf9b 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -85,3 +85,21 @@ Boards: compatible = "renesas,sk-rzg1m", "renesas,r8a7743" - Wheat compatible = "renesas,wheat", "renesas,r8a7792" + + +Most Renesas ARM SoCs have a Product Register that allows to retrieve SoC +product and revision information. If present, a device node for this register +should be added. + +Required properties: + - compatible: Must be "renesas,prr". + - reg: Base address and length of the register block. + + +Examples +-------- + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt new file mode 100644 index 0000000..83b0e54 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt @@ -0,0 +1,132 @@ +Device tree bindings for NVIDIA Tegra Generic Memory Interface bus + +The Generic Memory Interface bus enables memory transfers between internal and +external memory. Can be used to attach various high speed devices such as +synchronous/asynchronous NOR, FPGA, UARTS and more. + +The actual devices are instantiated from the child nodes of a GMI node. + +Required properties: + - compatible : Should contain one of the following: + For Tegra20 must contain "nvidia,tegra20-gmi". + For Tegra30 must contain "nvidia,tegra30-gmi". + - reg: Should contain GMI controller registers location and length. + - clocks: Must contain an entry for each entry in clock-names. + - clock-names: Must include the following entries: "gmi" + - resets : Must contain an entry for each entry in reset-names. + - reset-names : Must include the following entries: "gmi" + - #address-cells: The number of cells used to represent physical base + addresses in the GMI address space. Should be 2. + - #size-cells: The number of cells used to represent the size of an address + range in the GMI address space. Should be 1. + - ranges: Must be set up to reflect the memory layout with three integer values + for each chip-select line in use (only one entry is supported, see below + comments): + <cs-number> <offset> <physical address of mapping> <size> + +Note that the GMI controller does not have any internal chip-select address +decoding, because of that chip-selects either need to be managed via software +or by employing external chip-select decoding logic. + +If external chip-select logic is used to support multiple devices it is assumed +that the devices use the same timing and so are probably the same type. It also +assumes that they can fit in the 256MB address range. In this case only one +child device is supported which represents the active chip-select line, see +examples for more insight. + +The chip-select number is decoded from the child nodes second address cell of +'ranges' property, if 'ranges' property is not present or empty chip-select will +then be decoded from the first cell of the 'reg' property. + +Optional child cs node properties: + + - nvidia,snor-data-width-32bit: Use 32bit data-bus, default is 16bit. + - nvidia,snor-mux-mode: Enable address/data MUX mode. + - nvidia,snor-rdy-active-before-data: Assert RDY signal one cycle before data. + If omitted it will be asserted with data. + - nvidia,snor-rdy-active-high: RDY signal is active high + - nvidia,snor-adv-active-high: ADV signal is active high + - nvidia,snor-oe-active-high: WE/OE signal is active high + - nvidia,snor-cs-active-high: CS signal is active high + + Note that there is some special handling for the timing values. + From Tegra TRM: + Programming 0 means 1 clock cycle: actual cycle = programmed cycle + 1 + + - nvidia,snor-muxed-width: Number of cycles MUX address/data asserted on the + bus. Valid values are 0-15, default is 1 + - nvidia,snor-hold-width: Number of cycles CE stays asserted after the + de-assertion of WR_N (in case of SLAVE/MASTER Request) or OE_N + (in case of MASTER Request). Valid values are 0-15, default is 1 + - nvidia,snor-adv-width: Number of cycles during which ADV stays asserted. + Valid values are 0-15, default is 1. + - nvidia,snor-ce-width: Number of cycles before CE is asserted. + Valid values are 0-15, default is 4 + - nvidia,snor-we-width: Number of cycles during which WE stays asserted. + Valid values are 0-15, default is 1 + - nvidia,snor-oe-width: Number of cycles during which OE stays asserted. + Valid values are 0-255, default is 1 + - nvidia,snor-wait-width: Number of cycles before READY is asserted. + Valid values are 0-255, default is 3 + +Example with two SJA1000 CAN controllers connected to the GMI bus. We wrap the +controllers with a simple-bus node since they are all connected to the same +chip-select (CS4), in this example external address decoding is provided: + +gmi@70090000 { + compatible = "nvidia,tegra20-gmi"; + reg = <0x70009000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + clocks = <&tegra_car TEGRA20_CLK_NOR>; + clock-names = "gmi"; + resets = <&tegra_car 42>; + reset-names = "gmi"; + ranges = <4 0 0xd0000000 0xfffffff>; + + status = "okay"; + + bus@4,0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 4 0 0x40100>; + + nvidia,snor-mux-mode; + nvidia,snor-adv-active-high; + + can@0 { + reg = <0 0x100>; + ... + }; + + can@40000 { + reg = <0x40000 0x100>; + ... + }; + }; +}; + +Example with one SJA1000 CAN controller connected to the GMI bus +on CS4: + +gmi@70090000 { + compatible = "nvidia,tegra20-gmi"; + reg = <0x70009000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + clocks = <&tegra_car TEGRA20_CLK_NOR>; + clock-names = "gmi"; + resets = <&tegra_car 42>; + reset-names = "gmi"; + ranges = <4 0 0xd0000000 0xfffffff>; + + status = "okay"; + + can@4,0 { + reg = <4 0 0x100>; + nvidia,snor-mux-mode; + nvidia,snor-adv-active-high; + ... + }; +}; diff --git a/Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt b/Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt new file mode 100644 index 0000000..72daefc --- /dev/null +++ b/Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt @@ -0,0 +1,20 @@ +* Device tree bindings for Texas Instruments da8xx master peripheral + priority driver + +DA8XX SoCs feature a set of registers allowing to change the priority of all +peripherals classified as masters. + +Documentation: +OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf + +Required properties: + +- compatible: "ti,da850-mstpri" - for da850 based boards +- reg: offset and length of the mstpri registers + +Example for da850-lcdk is shown below. + +mstpri { + compatible = "ti,da850-mstpri"; + reg = <0x14110 0x0c>; +}; diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt new file mode 100644 index 0000000..e821e16 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt @@ -0,0 +1,108 @@ +NVIDIA Tegra Boot and Power Management Processor (BPMP) + +The BPMP is a specific processor in Tegra chip, which is designed for +booting process handling and offloading the power management, clock +management, and reset control tasks from the CPU. The binding document +defines the resources that would be used by the BPMP firmware driver, +which can create the interprocessor communication (IPC) between the CPU +and BPMP. + +Required properties: +- name : Should be bpmp +- compatible + Array of strings + One of: + - "nvidia,tegra186-bpmp" +- mboxes : The phandle of mailbox controller and the mailbox specifier. +- shmem : List of the phandle of the TX and RX shared memory area that + the IPC between CPU and BPMP is based on. +- #clock-cells : Should be 1. +- #power-domain-cells : Should be 1. +- #reset-cells : Should be 1. + +This node is a mailbox consumer. See the following files for details of +the mailbox subsystem, and the specifiers implemented by the relevant +provider(s): + +- .../mailbox/mailbox.txt +- .../mailbox/nvidia,tegra186-hsp.txt + +This node is a clock, power domain, and reset provider. See the following +files for general documentation of those features, and the specifiers +implemented by this node: + +- .../clock/clock-bindings.txt +- <dt-bindings/clock/tegra186-clock.h> +- ../power/power_domain.txt +- <dt-bindings/power/tegra186-powergate.h> +- .../reset/reset.txt +- <dt-bindings/reset/tegra186-reset.h> + +The BPMP implements some services which must be represented by separate nodes. +For example, it can provide access to certain I2C controllers, and the I2C +bindings represent each I2C controller as a device tree node. Such nodes should +be nested directly inside the main BPMP node. + +Software can determine whether a child node of the BPMP node represents a device +by checking for a compatible property. Any node with a compatible property +represents a device that can be instantiated. Nodes without a compatible +property may be used to provide configuration information regarding the BPMP +itself, although no such configuration nodes are currently defined by this +binding. + +The BPMP firmware defines no single global name-/numbering-space for such +services. Put another way, the numbering scheme for I2C buses is distinct from +the numbering scheme for any other service the BPMP may provide (e.g. a future +hypothetical SPI bus service). As such, child device nodes will have no reg +property, and the BPMP node will have no #address-cells or #size-cells property. + +The shared memory bindings for BPMP +----------------------------------- + +The shared memory area for the IPC TX and RX between CPU and BPMP are +predefined and work on top of sysram, which is an SRAM inside the chip. + +See ".../sram/sram.txt" for the bindings. + +Example: + +hsp_top0: hsp@03c00000 { + ... + #mbox-cells = <2>; +}; + +sysram@30000000 { + compatible = "nvidia,tegra186-sysram", "mmio-sram"; + reg = <0x0 0x30000000 0x0 0x50000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>; + + cpu_bpmp_tx: shmem@4e000 { + compatible = "nvidia,tegra186-bpmp-shmem"; + reg = <0x0 0x4e000 0x0 0x1000>; + label = "cpu-bpmp-tx"; + pool; + }; + + cpu_bpmp_rx: shmem@4f000 { + compatible = "nvidia,tegra186-bpmp-shmem"; + reg = <0x0 0x4f000 0x0 0x1000>; + label = "cpu-bpmp-rx"; + pool; + }; +}; + +bpmp { + compatible = "nvidia,tegra186-bpmp"; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>; + shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + + i2c { + compatible = "..."; + ... + }; +}; diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt index 3b4436e..20f26fb 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -10,8 +10,10 @@ Required properties: * "qcom,scm-apq8064" for APQ8064 platforms * "qcom,scm-msm8660" for MSM8660 platforms * "qcom,scm-msm8690" for MSM8690 platforms + * "qcom,scm-msm8996" for MSM8996 platforms * "qcom,scm" for later processors (MSM8916, APQ8084, MSM8974, etc) - clocks: One to three clocks may be required based on compatible. + * No clock required for "qcom,scm-msm8996" * Only core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660", and "qcom,scm-msm8960" * Core, iface, and bus clocks required for "qcom,scm" - clock-names: Must contain "core" for the core clock, "iface" for the interface diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt new file mode 100644 index 0000000..b99d25f --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt @@ -0,0 +1,52 @@ +NVIDIA Tegra Hardware Synchronization Primitives (HSP) + +The HSP modules are used for the processors to share resources and communicate +together. It provides a set of hardware synchronization primitives for +interprocessor communication. So the interprocessor communication (IPC) +protocols can use hardware synchronization primitives, when operating between +two processors not in an SMP relationship. + +The features that HSP supported are shared mailboxes, shared semaphores, +arbitrated semaphores and doorbells. + +Required properties: +- name : Should be hsp +- compatible + Array of strings. + one of: + - "nvidia,tegra186-hsp" +- reg : Offset and length of the register set for the device. +- interrupt-names + Array of strings. + Contains a list of names for the interrupts described by the interrupt + property. May contain the following entries, in any order: + - "doorbell" + Users of this binding MUST look up entries in the interrupt property + by name, using this interrupt-names property to do so. +- interrupts + Array of interrupt specifiers. + Must contain one entry per entry in the interrupt-names property, + in a matching order. +- #mbox-cells : Should be 2. + +The mbox specifier of the "mboxes" property in the client node should +contain two data. The first one should be the HSP type and the second +one should be the ID that the client is going to use. Those information +can be found in the following file. + +- <dt-bindings/mailbox/tegra186-hsp.h>. + +Example: + +hsp_top0: hsp@3c00000 { + compatible = "nvidia,tegra186-hsp"; + reg = <0x0 0x03c00000 0x0 0xa0000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "doorbell"; + #mbox-cells = <2>; +}; + +client { + ... + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_XXX>; +}; diff --git a/Documentation/devicetree/bindings/memory-controllers/ti-da8xx-ddrctl.txt b/Documentation/devicetree/bindings/memory-controllers/ti-da8xx-ddrctl.txt new file mode 100644 index 0000000..ec1dd40 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ti-da8xx-ddrctl.txt @@ -0,0 +1,20 @@ +* Device tree bindings for Texas Instruments da8xx DDR2/mDDR memory controller + +The DDR2/mDDR memory controller present on Texas Instruments da8xx SoCs features +a set of registers which allow to tweak the controller's behavior. + +Documentation: +OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf + +Required properties: + +- compatible: "ti,da850-ddr-controller" - for da850 SoC based boards +- reg: a tuple containing the base address of the memory + controller and the size of the memory area to map + +Example for da850 shown below. + +ddrctl { + compatible = "ti,da850-ddr-controller"; + reg = <0xb0000000 0xe8>; +}; diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt index 0725fb3..d91715b 100644 --- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt @@ -1,12 +1,14 @@ -DT bindings for the Renesas R-Car System Controller +DT bindings for the Renesas R-Car (RZ/G) System Controller == System Controller Node == -The R-Car System Controller provides power management for the CPU cores and -various coprocessors. +The R-Car (RZ/G) System Controller provides power management for the CPU cores +and various coprocessors. Required properties: - compatible: Must contain exactly one of the following: + - "renesas,r8a7743-sysc" (RZ/G1M) + - "renesas,r8a7745-sysc" (RZ/G1E) - "renesas,r8a7779-sysc" (R-Car H1) - "renesas,r8a7790-sysc" (R-Car H2) - "renesas,r8a7791-sysc" (R-Car M2-W) diff --git a/Documentation/devicetree/bindings/reset/oxnas,reset.txt b/Documentation/devicetree/bindings/reset/oxnas,reset.txt index 6f06db9..d27ccb5 100644 --- a/Documentation/devicetree/bindings/reset/oxnas,reset.txt +++ b/Documentation/devicetree/bindings/reset/oxnas,reset.txt @@ -5,45 +5,19 @@ Please also refer to reset.txt in this directory for common reset controller binding usage. Required properties: -- compatible: Should be "oxsemi,ox810se-reset" +- compatible: For OX810SE, should be "oxsemi,ox810se-reset" + For OX820, should be "oxsemi,ox820-reset" - #reset-cells: 1, see below Parent node should have the following properties : -- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" +- compatible: For OX810SE, should be : + "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" + For OX820, should be : + "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd" -For OX810SE, the indices are : - - 0 : ARM - - 1 : COPRO - - 2 : Reserved - - 3 : Reserved - - 4 : USBHS - - 5 : USBHSPHY - - 6 : MAC - - 7 : PCI - - 8 : DMA - - 9 : DPE - - 10 : DDR - - 11 : SATA - - 12 : SATA_LINK - - 13 : SATA_PHY - - 14 : Reserved - - 15 : NAND - - 16 : GPIO - - 17 : UART1 - - 18 : UART2 - - 19 : MISC - - 20 : I2S - - 21 : AHB_MON - - 22 : UART3 - - 23 : UART4 - - 24 : SGDMA - - 25 : Reserved - - 26 : Reserved - - 27 : Reserved - - 28 : Reserved - - 29 : Reserved - - 30 : Reserved - - 31 : BUS +Reset indices are in dt-bindings include files : +- For OX810SE: include/dt-bindings/reset/oxsemi,ox810se.h +- For OX820: include/dt-bindings/reset/oxsemi,ox820.h example: diff --git a/Documentation/devicetree/bindings/sram/sram.txt b/Documentation/devicetree/bindings/sram/sram.txt index add48f0..068c2c0 100644 --- a/Documentation/devicetree/bindings/sram/sram.txt +++ b/Documentation/devicetree/bindings/sram/sram.txt @@ -4,7 +4,7 @@ Simple IO memory regions to be managed by the genalloc API. Required properties: -- compatible : mmio-sram +- compatible : mmio-sram or atmel,sama5d2-securam - reg : SRAM iomem address range diff --git a/MAINTAINERS b/MAINTAINERS index b5f5d5b..7dc7663 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1627,6 +1627,7 @@ F: arch/arm/mach-qcom/ F: arch/arm64/boot/dts/qcom/* F: drivers/i2c/busses/i2c-qup.c F: drivers/clk/qcom/ +F: drivers/pinctrl/qcom/ F: drivers/soc/qcom/ F: drivers/spi/spi-qup.c F: drivers/tty/serial/msm_serial.h @@ -12088,6 +12089,16 @@ S: Maintained F: arch/xtensa/ F: drivers/irqchip/irq-xtensa-* +Texas Instruments' System Control Interface (TISCI) Protocol Driver +M: Nishanth Menon <nm@ti.com> +M: Tero Kristo <t-kristo@ti.com> +M: Santosh Shilimkar <ssantosh@kernel.org> +L: linux-arm-kernel@lists.infradead.org +S: Maintained +F: Documentation/devicetree/bindings/arm/keystone/ti,sci.txt +F: drivers/firmware/ti_sci* +F: include/linux/soc/ti/ti_sci_protocol.h + THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER M: Hans Verkuil <hverkuil@xs4all.nl> L: linux-media@vger.kernel.org diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index f0b5e7d..2bb4b09 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -41,6 +41,7 @@ menuconfig ARCH_RENESAS select HAVE_ARM_TWD if SMP select NO_IOPORT_MAP select PINCTRL + select SOC_BUS select ZONE_DMA if ARM_LPAE if ARCH_RENESAS diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index 119e110..f8eeeff 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -28,7 +28,6 @@ if ARCH_STI config SOC_STIH415 bool "STiH415 STMicroelectronics Consumer Electronics family" default y - select STIH415_RESET help This enables support for STMicroelectronics Digital Consumer Electronics family StiH415 parts, primarily targeted at set-top-box @@ -38,7 +37,6 @@ config SOC_STIH415 config SOC_STIH416 bool "STiH416 STMicroelectronics Consumer Electronics family" default y - select STIH416_RESET help This enables support for STMicroelectronics Digital Consumer Electronics family StiH416 parts, primarily targeted at set-top-box diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 6419a57..715ef12 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -144,6 +144,7 @@ config ARCH_RENESAS select PM select PM_GENERIC_DOMAINS select RENESAS_IRQC + select SOC_BUS help This enables support for the ARMv8 based Renesas SoCs. diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 7875105..b9e8cfc 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -150,6 +150,13 @@ config TEGRA_ACONNECT Driver for the Tegra ACONNECT bus which is used to interface with the devices inside the Audio Processing Engine (APE) for Tegra210. +config TEGRA_GMI + tristate "Tegra Generic Memory Interface bus driver" + depends on ARCH_TEGRA + help + Driver for the Tegra Generic Memory Interface bus which can be used + to attach devices such as NOR, UART, FPGA and more. + config UNIPHIER_SYSTEM_BUS tristate "UniPhier System Bus driver" depends on ARCH_UNIPHIER && OF @@ -167,4 +174,13 @@ config VEXPRESS_CONFIG help Platform configuration infrastructure for the ARM Ltd. Versatile Express. + +config DA8XX_MSTPRI + bool "TI da8xx master peripheral priority driver" + depends on ARCH_DAVINCI_DA8XX + help + Driver for Texas Instruments da8xx master peripheral priority + configuration. Allows to adjust the priorities of all master + peripherals. + endmenu diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index c6cfa6b..cc6364b 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -19,5 +19,8 @@ obj-$(CONFIG_QCOM_EBI2) += qcom-ebi2.o obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o +obj-$(CONFIG_TEGRA_GMI) += tegra-gmi.o obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o + +obj-$(CONFIG_DA8XX_MSTPRI) += da8xx-mstpri.o diff --git a/drivers/bus/da8xx-mstpri.c b/drivers/bus/da8xx-mstpri.c new file mode 100644 index 0000000..063397f --- /dev/null +++ b/drivers/bus/da8xx-mstpri.c @@ -0,0 +1,267 @@ +/* + * TI da8xx master peripheral priority driver + * + * Copyright (C) 2016 BayLibre SAS + * + * Author: + * Bartosz Golaszewski <bgolaszewski@baylibre.com.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/regmap.h> + +/* + * REVISIT: Linux doesn't have a good framework for the kind of performance + * knobs this driver controls. We can't use device tree properties as it deals + * with hardware configuration rather than description. We also don't want to + * commit to maintaining some random sysfs attributes. + * + * For now we just hardcode the register values for the boards that need + * some changes (as is the case for the LCD controller on da850-lcdk - the + * first board we support here). When linux gets an appropriate framework, + * we'll easily convert the driver to it. + */ + +#define DA8XX_MSTPRI0_OFFSET 0 +#define DA8XX_MSTPRI1_OFFSET 4 +#define DA8XX_MSTPRI2_OFFSET 8 + +enum { + DA8XX_MSTPRI_ARM_I = 0, + DA8XX_MSTPRI_ARM_D, + DA8XX_MSTPRI_UPP, + DA8XX_MSTPRI_SATA, + DA8XX_MSTPRI_PRU0, + DA8XX_MSTPRI_PRU1, + DA8XX_MSTPRI_EDMA30TC0, + DA8XX_MSTPRI_EDMA30TC1, + DA8XX_MSTPRI_EDMA31TC0, + DA8XX_MSTPRI_VPIF_DMA_0, + DA8XX_MSTPRI_VPIF_DMA_1, + DA8XX_MSTPRI_EMAC, + DA8XX_MSTPRI_USB0CFG, + DA8XX_MSTPRI_USB0CDMA, + DA8XX_MSTPRI_UHPI, + DA8XX_MSTPRI_USB1, + DA8XX_MSTPRI_LCDC, +}; + +struct da8xx_mstpri_descr { + int reg; + int shift; + int mask; +}; + +static const struct da8xx_mstpri_descr da8xx_mstpri_priority_list[] = { + [DA8XX_MSTPRI_ARM_I] = { + .reg = DA8XX_MSTPRI0_OFFSET, + .shift = 0, + .mask = 0x0000000f, + }, + [DA8XX_MSTPRI_ARM_D] = { + .reg = DA8XX_MSTPRI0_OFFSET, + .shift = 4, + .mask = 0x000000f0, + }, + [DA8XX_MSTPRI_UPP] = { + .reg = DA8XX_MSTPRI0_OFFSET, + .shift = 16, + .mask = 0x000f0000, + }, + [DA8XX_MSTPRI_SATA] = { + .reg = DA8XX_MSTPRI0_OFFSET, + .shift = 20, + .mask = 0x00f00000, + }, + [DA8XX_MSTPRI_PRU0] = { + .reg = DA8XX_MSTPRI1_OFFSET, + .shift = 0, + .mask = 0x0000000f, + }, + [DA8XX_MSTPRI_PRU1] = { + .reg = DA8XX_MSTPRI1_OFFSET, + .shift = 4, + .mask = 0x000000f0, + }, + [DA8XX_MSTPRI_EDMA30TC0] = { + .reg = DA8XX_MSTPRI1_OFFSET, + .shift = 8, + .mask = 0x00000f00, + }, + [DA8XX_MSTPRI_EDMA30TC1] = { + .reg = DA8XX_MSTPRI1_OFFSET, + .shift = 12, + .mask = 0x0000f000, + }, + [DA8XX_MSTPRI_EDMA31TC0] = { + .reg = DA8XX_MSTPRI1_OFFSET, + .shift = 16, + .mask = 0x000f0000, + }, + [DA8XX_MSTPRI_VPIF_DMA_0] = { + .reg = DA8XX_MSTPRI1_OFFSET, + .shift = 24, + .mask = 0x0f000000, + }, + [DA8XX_MSTPRI_VPIF_DMA_1] = { + .reg = DA8XX_MSTPRI1_OFFSET, + .shift = 28, + .mask = 0xf0000000, + }, + [DA8XX_MSTPRI_EMAC] = { + .reg = DA8XX_MSTPRI2_OFFSET, + .shift = 0, + .mask = 0x0000000f, + }, + [DA8XX_MSTPRI_USB0CFG] = { + .reg = DA8XX_MSTPRI2_OFFSET, + .shift = 8, + .mask = 0x00000f00, + }, + [DA8XX_MSTPRI_USB0CDMA] = { + .reg = DA8XX_MSTPRI2_OFFSET, + .shift = 12, + .mask = 0x0000f000, + }, + [DA8XX_MSTPRI_UHPI] = { + .reg = DA8XX_MSTPRI2_OFFSET, + .shift = 20, + .mask = 0x00f00000, + }, + [DA8XX_MSTPRI_USB1] = { + .reg = DA8XX_MSTPRI2_OFFSET, + .shift = 24, + .mask = 0x0f000000, + }, + [DA8XX_MSTPRI_LCDC] = { + .reg = DA8XX_MSTPRI2_OFFSET, + .shift = 28, + .mask = 0xf0000000, + }, +}; + +struct da8xx_mstpri_priority { + int which; + u32 val; +}; + +struct da8xx_mstpri_board_priorities { + const char *board; + const struct da8xx_mstpri_priority *priorities; + size_t numprio; +}; + +/* + * Default memory settings of da850 do not meet the throughput/latency + * requirements of tilcdc. This results in the image displayed being + * incorrect and the following warning being displayed by the LCDC + * drm driver: + * + * tilcdc da8xx_lcdc.0: tilcdc_crtc_irq(0x00000020): FIFO underfow + */ +static const struct da8xx_mstpri_priority da850_lcdk_priorities[] = { + { + .which = DA8XX_MSTPRI_LCDC, + .val = 0, + }, + { + .which = DA8XX_MSTPRI_EDMA30TC1, + .val = 0, + }, + { + .which = DA8XX_MSTPRI_EDMA30TC0, + .val = 1, + }, +}; + +static const struct da8xx_mstpri_board_priorities da8xx_mstpri_board_confs[] = { + { + .board = "ti,da850-lcdk", + .priorities = da850_lcdk_priorities, + .numprio = ARRAY_SIZE(da850_lcdk_priorities), + }, +}; + +static const struct da8xx_mstpri_board_priorities * +da8xx_mstpri_get_board_prio(void) +{ + const struct da8xx_mstpri_board_priorities *board_prio; + int i; + + for (i = 0; i < ARRAY_SIZE(da8xx_mstpri_board_confs); i++) { + board_prio = &da8xx_mstpri_board_confs[i]; + + if (of_machine_is_compatible(board_prio->board)) + return board_prio; + } + + return NULL; +} + +static int da8xx_mstpri_probe(struct platform_device *pdev) +{ + const struct da8xx_mstpri_board_priorities *prio_list; + const struct da8xx_mstpri_descr *prio_descr; + const struct da8xx_mstpri_priority *prio; + struct device *dev = &pdev->dev; + struct resource *res; + void __iomem *mstpri; + u32 reg; + int i; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mstpri = devm_ioremap_resource(dev, res); + if (IS_ERR(mstpri)) { + dev_err(dev, "unable to map MSTPRI registers\n"); + return PTR_ERR(mstpri); + } + + prio_list = da8xx_mstpri_get_board_prio(); + if (!prio_list) { + dev_err(dev, "no master priorities defined for this board\n"); + return -EINVAL; + } + + for (i = 0; i < prio_list->numprio; i++) { + prio = &prio_list->priorities[i]; + prio_descr = &da8xx_mstpri_priority_list[prio->which]; + + if (prio_descr->reg + sizeof(u32) > resource_size(res)) { + dev_warn(dev, "register offset out of range\n"); + continue; + } + + reg = readl(mstpri + prio_descr->reg); + reg &= ~prio_descr->mask; + reg |= prio->val << prio_descr->shift; + + writel(reg, mstpri + prio_descr->reg); + } + + return 0; +} + +static const struct of_device_id da8xx_mstpri_of_match[] = { + { .compatible = "ti,da850-mstpri", }, + { }, +}; + +static struct platform_driver da8xx_mstpri_driver = { + .probe = da8xx_mstpri_probe, + .driver = { + .name = "da8xx-mstpri", + .of_match_table = da8xx_mstpri_of_match, + }, +}; +module_platform_driver(da8xx_mstpri_driver); + +MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>"); +MODULE_DESCRIPTION("TI da8xx master peripheral priority driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/bus/tegra-gmi.c b/drivers/bus/tegra-gmi.c new file mode 100644 index 0000000..a657078 --- /dev/null +++ b/drivers/bus/tegra-gmi.c @@ -0,0 +1,284 @@ +/* + * Driver for NVIDIA Generic Memory Interface + * + * Copyright (C) 2016 Host Mobility AB. All rights reserved. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/reset.h> + +#define TEGRA_GMI_CONFIG 0x00 +#define TEGRA_GMI_CONFIG_GO BIT(31) +#define TEGRA_GMI_BUS_WIDTH_32BIT BIT(30) +#define TEGRA_GMI_MUX_MODE BIT(28) +#define TEGRA_GMI_RDY_BEFORE_DATA BIT(24) +#define TEGRA_GMI_RDY_ACTIVE_HIGH BIT(23) +#define TEGRA_GMI_ADV_ACTIVE_HIGH BIT(22) +#define TEGRA_GMI_OE_ACTIVE_HIGH BIT(21) +#define TEGRA_GMI_CS_ACTIVE_HIGH BIT(20) +#define TEGRA_GMI_CS_SELECT(x) ((x & 0x7) << 4) + +#define TEGRA_GMI_TIMING0 0x10 +#define TEGRA_GMI_MUXED_WIDTH(x) ((x & 0xf) << 12) +#define TEGRA_GMI_HOLD_WIDTH(x) ((x & 0xf) << 8) +#define TEGRA_GMI_ADV_WIDTH(x) ((x & 0xf) << 4) +#define TEGRA_GMI_CE_WIDTH(x) (x & 0xf) + +#define TEGRA_GMI_TIMING1 0x14 +#define TEGRA_GMI_WE_WIDTH(x) ((x & 0xff) << 16) +#define TEGRA_GMI_OE_WIDTH(x) ((x & 0xff) << 8) +#define TEGRA_GMI_WAIT_WIDTH(x) (x & 0xff) + +#define TEGRA_GMI_MAX_CHIP_SELECT 8 + +struct tegra_gmi { + struct device *dev; + void __iomem *base; + struct clk *clk; + struct reset_control *rst; + + u32 snor_config; + u32 snor_timing0; + u32 snor_timing1; +}; + +static int tegra_gmi_enable(struct tegra_gmi *gmi) +{ + int err; + + err = clk_prepare_enable(gmi->clk); + if (err < 0) { + dev_err(gmi->dev, "failed to enable clock: %d\n", err); + return err; + } + + reset_control_assert(gmi->rst); + usleep_range(2000, 4000); + reset_control_deassert(gmi->rst); + + writel(gmi->snor_timing0, gmi->base + TEGRA_GMI_TIMING0); + writel(gmi->snor_timing1, gmi->base + TEGRA_GMI_TIMING1); + + gmi->snor_config |= TEGRA_GMI_CONFIG_GO; + writel(gmi->snor_config, gmi->base + TEGRA_GMI_CONFIG); + + return 0; +} + +static void tegra_gmi_disable(struct tegra_gmi *gmi) +{ + u32 config; + + /* stop GMI operation */ + config = readl(gmi->base + TEGRA_GMI_CONFIG); + config &= ~TEGRA_GMI_CONFIG_GO; + writel(config, gmi->base + TEGRA_GMI_CONFIG); + + reset_control_assert(gmi->rst); + clk_disable_unprepare(gmi->clk); +} + +static int tegra_gmi_parse_dt(struct tegra_gmi *gmi) +{ + struct device_node *child; + u32 property, ranges[4]; + int err; + + child = of_get_next_available_child(gmi->dev->of_node, NULL); + if (!child) { + dev_err(gmi->dev, "no child nodes found\n"); + return -ENODEV; + } + + /* + * We currently only support one child device due to lack of + * chip-select address decoding. Which means that we only have one + * chip-select line from the GMI controller. + */ + if (of_get_child_count(gmi->dev->of_node) > 1) + dev_warn(gmi->dev, "only one child device is supported."); + + if (of_property_read_bool(child, "nvidia,snor-data-width-32bit")) + gmi->snor_config |= TEGRA_GMI_BUS_WIDTH_32BIT; + + if (of_property_read_bool(child, "nvidia,snor-mux-mode")) + gmi->snor_config |= TEGRA_GMI_MUX_MODE; + + if (of_property_read_bool(child, "nvidia,snor-rdy-active-before-data")) + gmi->snor_config |= TEGRA_GMI_RDY_BEFORE_DATA; + + if (of_property_read_bool(child, "nvidia,snor-rdy-active-high")) + gmi->snor_config |= TEGRA_GMI_RDY_ACTIVE_HIGH; + + if (of_property_read_bool(child, "nvidia,snor-adv-active-high")) + gmi->snor_config |= TEGRA_GMI_ADV_ACTIVE_HIGH; + + if (of_property_read_bool(child, "nvidia,snor-oe-active-high")) + gmi->snor_config |= TEGRA_GMI_OE_ACTIVE_HIGH; + + if (of_property_read_bool(child, "nvidia,snor-cs-active-high")) + gmi->snor_config |= TEGRA_GMI_CS_ACTIVE_HIGH; + + /* Decode the CS# */ + err = of_property_read_u32_array(child, "ranges", ranges, 4); + if (err < 0) { + /* Invalid binding */ + if (err == -EOVERFLOW) { + dev_err(gmi->dev, + "failed to decode CS: invalid ranges length\n"); + goto error_cs; + } + + /* + * If we reach here it means that the child node has an empty + * ranges or it does not exist at all. Attempt to decode the + * CS# from the reg property instead. + */ + err = of_property_read_u32(child, "reg", &property); + if (err < 0) { + dev_err(gmi->dev, + "failed to decode CS: no reg property found\n"); + goto error_cs; + } + } else { + property = ranges[1]; + } + + /* Valid chip selects are CS0-CS7 */ + if (property >= TEGRA_GMI_MAX_CHIP_SELECT) { + dev_err(gmi->dev, "invalid chip select: %d", property); + err = -EINVAL; + goto error_cs; + } + + gmi->snor_config |= TEGRA_GMI_CS_SELECT(property); + + /* The default values that are provided below are reset values */ + if (!of_property_read_u32(child, "nvidia,snor-muxed-width", &property)) + gmi->snor_timing0 |= TEGRA_GMI_MUXED_WIDTH(property); + else + gmi->snor_timing0 |= TEGRA_GMI_MUXED_WIDTH(1); + + if (!of_property_read_u32(child, "nvidia,snor-hold-width", &property)) + gmi->snor_timing0 |= TEGRA_GMI_HOLD_WIDTH(property); + else + gmi->snor_timing0 |= TEGRA_GMI_HOLD_WIDTH(1); + + if (!of_property_read_u32(child, "nvidia,snor-adv-width", &property)) + gmi->snor_timing0 |= TEGRA_GMI_ADV_WIDTH(property); + else + gmi->snor_timing0 |= TEGRA_GMI_ADV_WIDTH(1); + + if (!of_property_read_u32(child, "nvidia,snor-ce-width", &property)) + gmi->snor_timing0 |= TEGRA_GMI_CE_WIDTH(property); + else + gmi->snor_timing0 |= TEGRA_GMI_CE_WIDTH(4); + + if (!of_property_read_u32(child, "nvidia,snor-we-width", &property)) + gmi->snor_timing1 |= TEGRA_GMI_WE_WIDTH(property); + else + gmi->snor_timing1 |= TEGRA_GMI_WE_WIDTH(1); + + if (!of_property_read_u32(child, "nvidia,snor-oe-width", &property)) + gmi->snor_timing1 |= TEGRA_GMI_OE_WIDTH(property); + else + gmi->snor_timing1 |= TEGRA_GMI_OE_WIDTH(1); + + if (!of_property_read_u32(child, "nvidia,snor-wait-width", &property)) + gmi->snor_timing1 |= TEGRA_GMI_WAIT_WIDTH(property); + else + gmi->snor_timing1 |= TEGRA_GMI_WAIT_WIDTH(3); + +error_cs: + of_node_put(child); + return err; +} + +static int tegra_gmi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct tegra_gmi *gmi; + struct resource *res; + int err; + + gmi = devm_kzalloc(dev, sizeof(*gmi), GFP_KERNEL); + if (!gmi) + return -ENOMEM; + + gmi->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + gmi->base = devm_ioremap_resource(dev, res); + if (IS_ERR(gmi->base)) + return PTR_ERR(gmi->base); + + gmi->clk = devm_clk_get(dev, "gmi"); + if (IS_ERR(gmi->clk)) { + dev_err(dev, "can not get clock\n"); + return PTR_ERR(gmi->clk); + } + + gmi->rst = devm_reset_control_get(dev, "gmi"); + if (IS_ERR(gmi->rst)) { + dev_err(dev, "can not get reset\n"); + return PTR_ERR(gmi->rst); + } + + err = tegra_gmi_parse_dt(gmi); + if (err) + return err; + + err = tegra_gmi_enable(gmi); + if (err < 0) + return err; + + err = of_platform_default_populate(dev->of_node, NULL, dev); + if (err < 0) { + dev_err(dev, "fail to create devices.\n"); + tegra_gmi_disable(gmi); + return err; + } + + platform_set_drvdata(pdev, gmi); + + return 0; +} + +static int tegra_gmi_remove(struct platform_device *pdev) +{ + struct tegra_gmi *gmi = platform_get_drvdata(pdev); + + of_platform_depopulate(gmi->dev); + tegra_gmi_disable(gmi); + + return 0; +} + +static const struct of_device_id tegra_gmi_id_table[] = { + { .compatible = "nvidia,tegra20-gmi", }, + { .compatible = "nvidia,tegra30-gmi", }, + { } +}; +MODULE_DEVICE_TABLE(of, tegra_gmi_id_table); + +static struct platform_driver tegra_gmi_driver = { + .probe = tegra_gmi_probe, + .remove = tegra_gmi_remove, + .driver = { + .name = "tegra-gmi", + .of_match_table = tegra_gmi_id_table, + }, +}; +module_platform_driver(tegra_gmi_driver); + +MODULE_AUTHOR("Mirza Krak <mirza.krak@gmail.com"); +MODULE_DESCRIPTION("NVIDIA Tegra GMI Bus Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index bca172d..1867f0d 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -8,6 +8,17 @@ menu "Firmware Drivers" config ARM_PSCI_FW bool +config ARM_PSCI_CHECKER + bool "ARM PSCI checker" + depends on ARM_PSCI_FW && HOTPLUG_CPU && !TORTURE_TEST + help + Run the PSCI checker during startup. This checks that hotplug and + suspend operations work correctly when using PSCI. + + The torture tests may interfere with the PSCI checker by turning CPUs + on and off through hotplug, so for now torture tests and PSCI checker + are mutually exclusive. + config ARM_SCPI_PROTOCOL tristate "ARM System Control and Power Interface (SCPI) Message Protocol" depends on MAILBOX @@ -203,6 +214,21 @@ config QCOM_SCM_64 def_bool y depends on QCOM_SCM && ARM64 +config TI_SCI_PROTOCOL + tristate "TI System Control Interface (TISCI) Message Protocol" + depends on TI_MESSAGE_MANAGER + help + TI System Control Interface (TISCI) Message Protocol is used to manage + compute systems such as ARM, DSP etc with the system controller in + complex System on Chip(SoC) such as those found on certain keystone + generation SoC from TI. + + System controller provides various facilities including power + management function support. + + This protocol library is used by client drivers to use the features + provided by the system controller. + config HAVE_ARM_SMCCC bool @@ -210,5 +236,6 @@ source "drivers/firmware/broadcom/Kconfig" source "drivers/firmware/google/Kconfig" source "drivers/firmware/efi/Kconfig" source "drivers/firmware/meson/Kconfig" +source "drivers/firmware/tegra/Kconfig" endmenu diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile index 898ac41..a37f12e 100644 --- a/drivers/firmware/Makefile +++ b/drivers/firmware/Makefile @@ -2,6 +2,7 @@ # Makefile for the linux kernel. # obj-$(CONFIG_ARM_PSCI_FW) += psci.o +obj-$(CONFIG_ARM_PSCI_CHECKER) += psci_checker.o obj-$(CONFIG_ARM_SCPI_PROTOCOL) += arm_scpi.o obj-$(CONFIG_ARM_SCPI_POWER_DOMAIN) += scpi_pm_domain.o obj-$(CONFIG_DMI) += dmi_scan.o @@ -20,9 +21,11 @@ obj-$(CONFIG_QCOM_SCM) += qcom_scm.o obj-$(CONFIG_QCOM_SCM_64) += qcom_scm-64.o obj-$(CONFIG_QCOM_SCM_32) += qcom_scm-32.o CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQUIRES_SEC=1) -march=armv7-a +obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o obj-y += broadcom/ obj-y += meson/ obj-$(CONFIG_GOOGLE_FIRMWARE) += google/ obj-$(CONFIG_EFI) += efi/ obj-$(CONFIG_UEFI_CPER) += efi/ +obj-y += tegra/ diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c index ce2bc2a..70e1323 100644 --- a/drivers/firmware/arm_scpi.c +++ b/drivers/firmware/arm_scpi.c @@ -50,20 +50,27 @@ #define CMD_TOKEN_ID_MASK 0xff #define CMD_DATA_SIZE_SHIFT 16 #define CMD_DATA_SIZE_MASK 0x1ff +#define CMD_LEGACY_DATA_SIZE_SHIFT 20 +#define CMD_LEGACY_DATA_SIZE_MASK 0x1ff #define PACK_SCPI_CMD(cmd_id, tx_sz) \ ((((cmd_id) & CMD_ID_MASK) << CMD_ID_SHIFT) | \ (((tx_sz) & CMD_DATA_SIZE_MASK) << CMD_DATA_SIZE_SHIFT)) #define ADD_SCPI_TOKEN(cmd, token) \ ((cmd) |= (((token) & CMD_TOKEN_ID_MASK) << CMD_TOKEN_ID_SHIFT)) +#define PACK_LEGACY_SCPI_CMD(cmd_id, tx_sz) \ + ((((cmd_id) & CMD_ID_MASK) << CMD_ID_SHIFT) | \ + (((tx_sz) & CMD_LEGACY_DATA_SIZE_MASK) << CMD_LEGACY_DATA_SIZE_SHIFT)) #define CMD_SIZE(cmd) (((cmd) >> CMD_DATA_SIZE_SHIFT) & CMD_DATA_SIZE_MASK) +#define CMD_LEGACY_SIZE(cmd) (((cmd) >> CMD_LEGACY_DATA_SIZE_SHIFT) & \ + CMD_LEGACY_DATA_SIZE_MASK) #define CMD_UNIQ_MASK (CMD_TOKEN_ID_MASK << CMD_TOKEN_ID_SHIFT | CMD_ID_MASK) #define CMD_XTRACT_UNIQ(cmd) ((cmd) & CMD_UNIQ_MASK) #define SCPI_SLOT 0 #define MAX_DVFS_DOMAINS 8 -#define MAX_DVFS_OPPS 8 +#define MAX_DVFS_OPPS 16 #define DVFS_LATENCY(hdr) (le32_to_cpu(hdr) >> 16) #define DVFS_OPP_COUNT(hdr) ((le32_to_cpu(hdr) >> 8) & 0xff) @@ -99,6 +106,7 @@ enum scpi_error_codes { SCPI_ERR_MAX }; +/* SCPI Standard commands */ enum scpi_std_cmd { SCPI_CMD_INVALID = 0x00, SCPI_CMD_SCPI_READY = 0x01, @@ -132,6 +140,108 @@ enum scpi_std_cmd { SCPI_CMD_COUNT }; +/* SCPI Legacy Commands */ +enum legacy_scpi_std_cmd { + LEGACY_SCPI_CMD_INVALID = 0x00, + LEGACY_SCPI_CMD_SCPI_READY = 0x01, + LEGACY_SCPI_CMD_SCPI_CAPABILITIES = 0x02, + LEGACY_SCPI_CMD_EVENT = 0x03, + LEGACY_SCPI_CMD_SET_CSS_PWR_STATE = 0x04, + LEGACY_SCPI_CMD_GET_CSS_PWR_STATE = 0x05, + LEGACY_SCPI_CMD_CFG_PWR_STATE_STAT = 0x06, + LEGACY_SCPI_CMD_GET_PWR_STATE_STAT = 0x07, + LEGACY_SCPI_CMD_SYS_PWR_STATE = 0x08, + LEGACY_SCPI_CMD_L2_READY = 0x09, + LEGACY_SCPI_CMD_SET_AP_TIMER = 0x0a, + LEGACY_SCPI_CMD_CANCEL_AP_TIME = 0x0b, + LEGACY_SCPI_CMD_DVFS_CAPABILITIES = 0x0c, + LEGACY_SCPI_CMD_GET_DVFS_INFO = 0x0d, + LEGACY_SCPI_CMD_SET_DVFS = 0x0e, + LEGACY_SCPI_CMD_GET_DVFS = 0x0f, + LEGACY_SCPI_CMD_GET_DVFS_STAT = 0x10, + LEGACY_SCPI_CMD_SET_RTC = 0x11, + LEGACY_SCPI_CMD_GET_RTC = 0x12, + LEGACY_SCPI_CMD_CLOCK_CAPABILITIES = 0x13, + LEGACY_SCPI_CMD_SET_CLOCK_INDEX = 0x14, + LEGACY_SCPI_CMD_SET_CLOCK_VALUE = 0x15, + LEGACY_SCPI_CMD_GET_CLOCK_VALUE = 0x16, + LEGACY_SCPI_CMD_PSU_CAPABILITIES = 0x17, + LEGACY_SCPI_CMD_SET_PSU = 0x18, + LEGACY_SCPI_CMD_GET_PSU = 0x19, + LEGACY_SCPI_CMD_SENSOR_CAPABILITIES = 0x1a, + LEGACY_SCPI_CMD_SENSOR_INFO = 0x1b, + LEGACY_SCPI_CMD_SENSOR_VALUE = 0x1c, + LEGACY_SCPI_CMD_SENSOR_CFG_PERIODIC = 0x1d, + LEGACY_SCPI_CMD_SENSOR_CFG_BOUNDS = 0x1e, + LEGACY_SCPI_CMD_SENSOR_ASYNC_VALUE = 0x1f, + LEGACY_SCPI_CMD_COUNT +}; + +/* List all commands that are required to go through the high priority link */ +static int legacy_hpriority_cmds[] = { + LEGACY_SCPI_CMD_GET_CSS_PWR_STATE, + LEGACY_SCPI_CMD_CFG_PWR_STATE_STAT, + LEGACY_SCPI_CMD_GET_PWR_STATE_STAT, + LEGACY_SCPI_CMD_SET_DVFS, + LEGACY_SCPI_CMD_GET_DVFS, + LEGACY_SCPI_CMD_SET_RTC, + LEGACY_SCPI_CMD_GET_RTC, + LEGACY_SCPI_CMD_SET_CLOCK_INDEX, + LEGACY_SCPI_CMD_SET_CLOCK_VALUE, + LEGACY_SCPI_CMD_GET_CLOCK_VALUE, + LEGACY_SCPI_CMD_SET_PSU, + LEGACY_SCPI_CMD_GET_PSU, + LEGACY_SCPI_CMD_SENSOR_CFG_PERIODIC, + LEGACY_SCPI_CMD_SENSOR_CFG_BOUNDS, +}; + +/* List all commands used by this driver, used as indexes */ +enum scpi_drv_cmds { + CMD_SCPI_CAPABILITIES = 0, + CMD_GET_CLOCK_INFO, + CMD_GET_CLOCK_VALUE, + CMD_SET_CLOCK_VALUE, + CMD_GET_DVFS, + CMD_SET_DVFS, + CMD_GET_DVFS_INFO, + CMD_SENSOR_CAPABILITIES, + CMD_SENSOR_INFO, + CMD_SENSOR_VALUE, + CMD_SET_DEVICE_PWR_STATE, + CMD_GET_DEVICE_PWR_STATE, + CMD_MAX_COUNT, +}; + +static int scpi_std_commands[CMD_MAX_COUNT] = { + SCPI_CMD_SCPI_CAPABILITIES, + SCPI_CMD_GET_CLOCK_INFO, + SCPI_CMD_GET_CLOCK_VALUE, + SCPI_CMD_SET_CLOCK_VALUE, + SCPI_CMD_GET_DVFS, + SCPI_CMD_SET_DVFS, + SCPI_CMD_GET_DVFS_INFO, + SCPI_CMD_SENSOR_CAPABILITIES, + SCPI_CMD_SENSOR_INFO, + SCPI_CMD_SENSOR_VALUE, + SCPI_CMD_SET_DEVICE_PWR_STATE, + SCPI_CMD_GET_DEVICE_PWR_STATE, +}; + +static int scpi_legacy_commands[CMD_MAX_COUNT] = { + LEGACY_SCPI_CMD_SCPI_CAPABILITIES, + -1, /* GET_CLOCK_INFO */ + LEGACY_SCPI_CMD_GET_CLOCK_VALUE, + LEGACY_SCPI_CMD_SET_CLOCK_VALUE, + LEGACY_SCPI_CMD_GET_DVFS, + LEGACY_SCPI_CMD_SET_DVFS, + LEGACY_SCPI_CMD_GET_DVFS_INFO, + LEGACY_SCPI_CMD_SENSOR_CAPABILITIES, + LEGACY_SCPI_CMD_SENSOR_INFO, + LEGACY_SCPI_CMD_SENSOR_VALUE, + -1, /* SET_DEVICE_PWR_STATE */ + -1, /* GET_DEVICE_PWR_STATE */ +}; + struct scpi_xfer { u32 slot; /* has to be first element */ u32 cmd; @@ -160,7 +270,10 @@ struct scpi_chan { struct scpi_drvinfo { u32 protocol_version; u32 firmware_version; + bool is_legacy; int num_chans; + int *commands; + DECLARE_BITMAP(cmd_priority, LEGACY_SCPI_CMD_COUNT); atomic_t next_chan; struct scpi_ops *scpi_ops; struct scpi_chan *channels; @@ -177,6 +290,11 @@ struct scpi_shared_mem { u8 payload[0]; } __packed; +struct legacy_scpi_shared_mem { + __le32 status; + u8 payload[0]; +} __packed; + struct scp_capabilities { __le32 protocol_version; __le32 event_version; @@ -202,6 +320,12 @@ struct clk_set_value { __le32 rate; } __packed; +struct legacy_clk_set_value { + __le32 rate; + __le16 id; + __le16 reserved; +} __packed; + struct dvfs_info { __le32 header; struct { @@ -273,19 +397,43 @@ static void scpi_process_cmd(struct scpi_chan *ch, u32 cmd) return; } - list_for_each_entry(t, &ch->rx_pending, node) - if (CMD_XTRACT_UNIQ(t->cmd) == CMD_XTRACT_UNIQ(cmd)) { - list_del(&t->node); - match = t; - break; - } + /* Command type is not replied by the SCP Firmware in legacy Mode + * We should consider that command is the head of pending RX commands + * if the list is not empty. In TX only mode, the list would be empty. + */ + if (scpi_info->is_legacy) { + match = list_first_entry(&ch->rx_pending, struct scpi_xfer, + node); + list_del(&match->node); + } else { + list_for_each_entry(t, &ch->rx_pending, node) + if (CMD_XTRACT_UNIQ(t->cmd) == CMD_XTRACT_UNIQ(cmd)) { + list_del(&t->node); + match = t; + break; + } + } /* check if wait_for_completion is in progress or timed-out */ if (match && !completion_done(&match->done)) { - struct scpi_shared_mem *mem = ch->rx_payload; - unsigned int len = min(match->rx_len, CMD_SIZE(cmd)); + unsigned int len; + + if (scpi_info->is_legacy) { + struct legacy_scpi_shared_mem *mem = ch->rx_payload; + + /* RX Length is not replied by the legacy Firmware */ + len = match->rx_len; + + match->status = le32_to_cpu(mem->status); + memcpy_fromio(match->rx_buf, mem->payload, len); + } else { + struct scpi_shared_mem *mem = ch->rx_payload; + + len = min(match->rx_len, CMD_SIZE(cmd)); + + match->status = le32_to_cpu(mem->status); + memcpy_fromio(match->rx_buf, mem->payload, len); + } - match->status = le32_to_cpu(mem->status); - memcpy_fromio(match->rx_buf, mem->payload, len); if (match->rx_len > len) memset(match->rx_buf + len, 0, match->rx_len - len); complete(&match->done); @@ -297,7 +445,10 @@ static void scpi_handle_remote_msg(struct mbox_client *c, void *msg) { struct scpi_chan *ch = container_of(c, struct scpi_chan, cl); struct scpi_shared_mem *mem = ch->rx_payload; - u32 cmd = le32_to_cpu(mem->command); + u32 cmd = 0; + + if (!scpi_info->is_legacy) + cmd = le32_to_cpu(mem->command); scpi_process_cmd(ch, cmd); } @@ -309,8 +460,13 @@ static void scpi_tx_prepare(struct mbox_client *c, void *msg) struct scpi_chan *ch = container_of(c, struct scpi_chan, cl); struct scpi_shared_mem *mem = (struct scpi_shared_mem *)ch->tx_payload; - if (t->tx_buf) - memcpy_toio(mem->payload, t->tx_buf, t->tx_len); + if (t->tx_buf) { + if (scpi_info->is_legacy) + memcpy_toio(ch->tx_payload, t->tx_buf, t->tx_len); + else + memcpy_toio(mem->payload, t->tx_buf, t->tx_len); + } + if (t->rx_buf) { if (!(++ch->token)) ++ch->token; @@ -319,7 +475,9 @@ static void scpi_tx_prepare(struct mbox_client *c, void *msg) list_add_tail(&t->node, &ch->rx_pending); spin_unlock_irqrestore(&ch->rx_lock, flags); } - mem->command = cpu_to_le32(t->cmd); + + if (!scpi_info->is_legacy) + mem->command = cpu_to_le32(t->cmd); } static struct scpi_xfer *get_scpi_xfer(struct scpi_chan *ch) @@ -344,23 +502,38 @@ static void put_scpi_xfer(struct scpi_xfer *t, struct scpi_chan *ch) mutex_unlock(&ch->xfers_lock); } -static int scpi_send_message(u8 cmd, void *tx_buf, unsigned int tx_len, +static int scpi_send_message(u8 idx, void *tx_buf, unsigned int tx_len, void *rx_buf, unsigned int rx_len) { int ret; u8 chan; + u8 cmd; struct scpi_xfer *msg; struct scpi_chan *scpi_chan; - chan = atomic_inc_return(&scpi_info->next_chan) % scpi_info->num_chans; + if (scpi_info->commands[idx] < 0) + return -EOPNOTSUPP; + + cmd = scpi_info->commands[idx]; + + if (scpi_info->is_legacy) + chan = test_bit(cmd, scpi_info->cmd_priority) ? 1 : 0; + else + chan = atomic_inc_return(&scpi_info->next_chan) % + scpi_info->num_chans; scpi_chan = scpi_info->channels + chan; msg = get_scpi_xfer(scpi_chan); if (!msg) return -ENOMEM; - msg->slot = BIT(SCPI_SLOT); - msg->cmd = PACK_SCPI_CMD(cmd, tx_len); + if (scpi_info->is_legacy) { + msg->cmd = PACK_LEGACY_SCPI_CMD(cmd, tx_len); + msg->slot = msg->cmd; + } else { + msg->slot = BIT(SCPI_SLOT); + msg->cmd = PACK_SCPI_CMD(cmd, tx_len); + } msg->tx_buf = tx_buf; msg->tx_len = tx_len; msg->rx_buf = rx_buf; @@ -397,7 +570,7 @@ scpi_clk_get_range(u16 clk_id, unsigned long *min, unsigned long *max) struct clk_get_info clk; __le16 le_clk_id = cpu_to_le16(clk_id); - ret = scpi_send_message(SCPI_CMD_GET_CLOCK_INFO, &le_clk_id, + ret = scpi_send_message(CMD_GET_CLOCK_INFO, &le_clk_id, sizeof(le_clk_id), &clk, sizeof(clk)); if (!ret) { *min = le32_to_cpu(clk.min_rate); @@ -412,8 +585,9 @@ static unsigned long scpi_clk_get_val(u16 clk_id) struct clk_get_value clk; __le16 le_clk_id = cpu_to_le16(clk_id); - ret = scpi_send_message(SCPI_CMD_GET_CLOCK_VALUE, &le_clk_id, + ret = scpi_send_message(CMD_GET_CLOCK_VALUE, &le_clk_id, sizeof(le_clk_id), &clk, sizeof(clk)); + return ret ? ret : le32_to_cpu(clk.rate); } @@ -425,7 +599,19 @@ static int scpi_clk_set_val(u16 clk_id, unsigned long rate) .rate = cpu_to_le32(rate) }; - return scpi_send_message(SCPI_CMD_SET_CLOCK_VALUE, &clk, sizeof(clk), + return scpi_send_message(CMD_SET_CLOCK_VALUE, &clk, sizeof(clk), + &stat, sizeof(stat)); +} + +static int legacy_scpi_clk_set_val(u16 clk_id, unsigned long rate) +{ + int stat; + struct legacy_clk_set_value clk = { + .id = cpu_to_le16(clk_id), + .rate = cpu_to_le32(rate) + }; + + return scpi_send_message(CMD_SET_CLOCK_VALUE, &clk, sizeof(clk), &stat, sizeof(stat)); } @@ -434,8 +620,9 @@ static int scpi_dvfs_get_idx(u8 domain) int ret; u8 dvfs_idx; - ret = scpi_send_message(SCPI_CMD_GET_DVFS, &domain, sizeof(domain), + ret = scpi_send_message(CMD_GET_DVFS, &domain, sizeof(domain), &dvfs_idx, sizeof(dvfs_idx)); + return ret ? ret : dvfs_idx; } @@ -444,7 +631,7 @@ static int scpi_dvfs_set_idx(u8 domain, u8 index) int stat; struct dvfs_set dvfs = {domain, index}; - return scpi_send_message(SCPI_CMD_SET_DVFS, &dvfs, sizeof(dvfs), + return scpi_send_message(CMD_SET_DVFS, &dvfs, sizeof(dvfs), &stat, sizeof(stat)); } @@ -468,9 +655,8 @@ static struct scpi_dvfs_info *scpi_dvfs_get_info(u8 domain) if (scpi_info->dvfs[domain]) /* data already populated */ return scpi_info->dvfs[domain]; - ret = scpi_send_message(SCPI_CMD_GET_DVFS_INFO, &domain, sizeof(domain), + ret = scpi_send_message(CMD_GET_DVFS_INFO, &domain, sizeof(domain), &buf, sizeof(buf)); - if (ret) return ERR_PTR(ret); @@ -503,7 +689,7 @@ static int scpi_sensor_get_capability(u16 *sensors) struct sensor_capabilities cap_buf; int ret; - ret = scpi_send_message(SCPI_CMD_SENSOR_CAPABILITIES, NULL, 0, &cap_buf, + ret = scpi_send_message(CMD_SENSOR_CAPABILITIES, NULL, 0, &cap_buf, sizeof(cap_buf)); if (!ret) *sensors = le16_to_cpu(cap_buf.sensors); @@ -517,7 +703,7 @@ static int scpi_sensor_get_info(u16 sensor_id, struct scpi_sensor_info *info) struct _scpi_sensor_info _info; int ret; - ret = scpi_send_message(SCPI_CMD_SENSOR_INFO, &id, sizeof(id), + ret = scpi_send_message(CMD_SENSOR_INFO, &id, sizeof(id), &_info, sizeof(_info)); if (!ret) { memcpy(info, &_info, sizeof(*info)); @@ -533,7 +719,7 @@ static int scpi_sensor_get_value(u16 sensor, u64 *val) struct sensor_value buf; int ret; - ret = scpi_send_message(SCPI_CMD_SENSOR_VALUE, &id, sizeof(id), + ret = scpi_send_message(CMD_SENSOR_VALUE, &id, sizeof(id), &buf, sizeof(buf)); if (!ret) *val = (u64)le32_to_cpu(buf.hi_val) << 32 | @@ -548,7 +734,7 @@ static int scpi_device_get_power_state(u16 dev_id) u8 pstate; __le16 id = cpu_to_le16(dev_id); - ret = scpi_send_message(SCPI_CMD_GET_DEVICE_PWR_STATE, &id, + ret = scpi_send_message(CMD_GET_DEVICE_PWR_STATE, &id, sizeof(id), &pstate, sizeof(pstate)); return ret ? ret : pstate; } @@ -561,7 +747,7 @@ static int scpi_device_set_power_state(u16 dev_id, u8 pstate) .pstate = pstate, }; - return scpi_send_message(SCPI_CMD_SET_DEVICE_PWR_STATE, &dev_set, + return scpi_send_message(CMD_SET_DEVICE_PWR_STATE, &dev_set, sizeof(dev_set), &stat, sizeof(stat)); } @@ -591,12 +777,16 @@ static int scpi_init_versions(struct scpi_drvinfo *info) int ret; struct scp_capabilities caps; - ret = scpi_send_message(SCPI_CMD_SCPI_CAPABILITIES, NULL, 0, + ret = scpi_send_message(CMD_SCPI_CAPABILITIES, NULL, 0, &caps, sizeof(caps)); if (!ret) { info->protocol_version = le32_to_cpu(caps.protocol_version); info->firmware_version = le32_to_cpu(caps.platform_version); } + /* Ignore error if not implemented */ + if (scpi_info->is_legacy && ret == -EOPNOTSUPP) + return 0; + return ret; } @@ -681,6 +871,11 @@ static int scpi_alloc_xfer_list(struct device *dev, struct scpi_chan *ch) return 0; } +static const struct of_device_id legacy_scpi_of_match[] = { + {.compatible = "arm,scpi-pre-1.0"}, + {}, +}; + static int scpi_probe(struct platform_device *pdev) { int count, idx, ret; @@ -693,6 +888,9 @@ static int scpi_probe(struct platform_device *pdev) if (!scpi_info) return -ENOMEM; + if (of_match_device(legacy_scpi_of_match, &pdev->dev)) + scpi_info->is_legacy = true; + count = of_count_phandle_with_args(np, "mboxes", "#mbox-cells"); if (count < 0) { dev_err(dev, "no mboxes property in '%s'\n", np->full_name); @@ -755,8 +953,21 @@ err: scpi_info->channels = scpi_chan; scpi_info->num_chans = count; + scpi_info->commands = scpi_std_commands; + platform_set_drvdata(pdev, scpi_info); + if (scpi_info->is_legacy) { + /* Replace with legacy variants */ + scpi_ops.clk_set_val = legacy_scpi_clk_set_val; + scpi_info->commands = scpi_legacy_commands; + + /* Fill priority bitmap */ + for (idx = 0; idx < ARRAY_SIZE(legacy_hpriority_cmds); idx++) + set_bit(legacy_hpriority_cmds[idx], + scpi_info->cmd_priority); + } + ret = scpi_init_versions(scpi_info); if (ret) { dev_err(dev, "incorrect or no SCP firmware found\n"); @@ -781,6 +992,7 @@ err: static const struct of_device_id scpi_of_match[] = { {.compatible = "arm,scpi"}, + {.compatible = "arm,scpi-pre-1.0"}, {}, }; diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci.c index 8263429..6c60a50 100644 --- a/drivers/firmware/psci.c +++ b/drivers/firmware/psci.c @@ -630,7 +630,7 @@ int __init psci_dt_init(void) np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np); - if (!np) + if (!np || !of_device_is_available(np)) return -ENODEV; init_fn = (psci_initcall_t)matched_np->data; diff --git a/drivers/firmware/psci_checker.c b/drivers/firmware/psci_checker.c new file mode 100644 index 0000000..44bdb78 --- /dev/null +++ b/drivers/firmware/psci_checker.c @@ -0,0 +1,490 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2016 ARM Limited + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/atomic.h> +#include <linux/completion.h> +#include <linux/cpu.h> +#include <linux/cpuidle.h> +#include <linux/cpu_pm.h> +#include <linux/kernel.h> +#include <linux/kthread.h> +#include <linux/module.h> +#include <linux/preempt.h> +#include <linux/psci.h> +#include <linux/slab.h> +#include <linux/tick.h> +#include <linux/topology.h> + +#include <asm/cpuidle.h> + +#include <uapi/linux/psci.h> + +#define NUM_SUSPEND_CYCLE (10) + +static unsigned int nb_available_cpus; +static int tos_resident_cpu = -1; + +static atomic_t nb_active_threads; +static struct completion suspend_threads_started = + COMPLETION_INITIALIZER(suspend_threads_started); +static struct completion suspend_threads_done = + COMPLETION_INITIALIZER(suspend_threads_done); + +/* + * We assume that PSCI operations are used if they are available. This is not + * necessarily true on arm64, since the decision is based on the + * "enable-method" property of each CPU in the DT, but given that there is no + * arch-specific way to check this, we assume that the DT is sensible. + */ +static int psci_ops_check(void) +{ + int migrate_type = -1; + int cpu; + + if (!(psci_ops.cpu_off && psci_ops.cpu_on && psci_ops.cpu_suspend)) { + pr_warn("Missing PSCI operations, aborting tests\n"); + return -EOPNOTSUPP; + } + + if (psci_ops.migrate_info_type) + migrate_type = psci_ops.migrate_info_type(); + + if (migrate_type == PSCI_0_2_TOS_UP_MIGRATE || + migrate_type == PSCI_0_2_TOS_UP_NO_MIGRATE) { + /* There is a UP Trusted OS, find on which core it resides. */ + for_each_online_cpu(cpu) + if (psci_tos_resident_on(cpu)) { + tos_resident_cpu = cpu; + break; + } + if (tos_resident_cpu == -1) + pr_warn("UP Trusted OS resides on no online CPU\n"); + } + + return 0; +} + +static int find_clusters(const struct cpumask *cpus, + const struct cpumask **clusters) +{ + unsigned int nb = 0; + cpumask_var_t tmp; + + if (!alloc_cpumask_var(&tmp, GFP_KERNEL)) + return -ENOMEM; + cpumask_copy(tmp, cpus); + + while (!cpumask_empty(tmp)) { + const struct cpumask *cluster = + topology_core_cpumask(cpumask_any(tmp)); + + clusters[nb++] = cluster; + cpumask_andnot(tmp, tmp, cluster); + } + + free_cpumask_var(tmp); + return nb; +} + +/* + * offlined_cpus is a temporary array but passing it as an argument avoids + * multiple allocations. + */ +static unsigned int down_and_up_cpus(const struct cpumask *cpus, + struct cpumask *offlined_cpus) +{ + int cpu; + int err = 0; + + cpumask_clear(offlined_cpus); + + /* Try to power down all CPUs in the mask. */ + for_each_cpu(cpu, cpus) { + int ret = cpu_down(cpu); + + /* + * cpu_down() checks the number of online CPUs before the TOS + * resident CPU. + */ + if (cpumask_weight(offlined_cpus) + 1 == nb_available_cpus) { + if (ret != -EBUSY) { + pr_err("Unexpected return code %d while trying " + "to power down last online CPU %d\n", + ret, cpu); + ++err; + } + } else if (cpu == tos_resident_cpu) { + if (ret != -EPERM) { + pr_err("Unexpected return code %d while trying " + "to power down TOS resident CPU %d\n", + ret, cpu); + ++err; + } + } else if (ret != 0) { + pr_err("Error occurred (%d) while trying " + "to power down CPU %d\n", ret, cpu); + ++err; + } + + if (ret == 0) + cpumask_set_cpu(cpu, offlined_cpus); + } + + /* Try to power up all the CPUs that have been offlined. */ + for_each_cpu(cpu, offlined_cpus) { + int ret = cpu_up(cpu); + + if (ret != 0) { + pr_err("Error occurred (%d) while trying " + "to power up CPU %d\n", ret, cpu); + ++err; + } else { + cpumask_clear_cpu(cpu, offlined_cpus); + } + } + + /* + * Something went bad at some point and some CPUs could not be turned + * back on. + */ + WARN_ON(!cpumask_empty(offlined_cpus) || + num_online_cpus() != nb_available_cpus); + + return err; +} + +static int hotplug_tests(void) +{ + int err; + cpumask_var_t offlined_cpus; + int i, nb_cluster; + const struct cpumask **clusters; + char *page_buf; + + err = -ENOMEM; + if (!alloc_cpumask_var(&offlined_cpus, GFP_KERNEL)) + return err; + /* We may have up to nb_available_cpus clusters. */ + clusters = kmalloc_array(nb_available_cpus, sizeof(*clusters), + GFP_KERNEL); + if (!clusters) + goto out_free_cpus; + page_buf = (char *)__get_free_page(GFP_KERNEL); + if (!page_buf) + goto out_free_clusters; + + err = 0; + nb_cluster = find_clusters(cpu_online_mask, clusters); + + /* + * Of course the last CPU cannot be powered down and cpu_down() should + * refuse doing that. + */ + pr_info("Trying to turn off and on again all CPUs\n"); + err += down_and_up_cpus(cpu_online_mask, offlined_cpus); + + /* + * Take down CPUs by cluster this time. When the last CPU is turned + * off, the cluster itself should shut down. + */ + for (i = 0; i < nb_cluster; ++i) { + int cluster_id = + topology_physical_package_id(cpumask_any(clusters[i])); + ssize_t len = cpumap_print_to_pagebuf(true, page_buf, + clusters[i]); + /* Remove trailing newline. */ + page_buf[len - 1] = '\0'; + pr_info("Trying to turn off and on again cluster %d " + "(CPUs %s)\n", cluster_id, page_buf); + err += down_and_up_cpus(clusters[i], offlined_cpus); + } + + free_page((unsigned long)page_buf); +out_free_clusters: + kfree(clusters); +out_free_cpus: + free_cpumask_var(offlined_cpus); + return err; +} + +static void dummy_callback(unsigned long ignored) {} + +static int suspend_cpu(int index, bool broadcast) +{ + int ret; + + arch_cpu_idle_enter(); + + if (broadcast) { + /* + * The local timer will be shut down, we need to enter tick + * broadcast. + */ + ret = tick_broadcast_enter(); + if (ret) { + /* + * In the absence of hardware broadcast mechanism, + * this CPU might be used to broadcast wakeups, which + * may be why entering tick broadcast has failed. + * There is little the kernel can do to work around + * that, so enter WFI instead (idle state 0). + */ + cpu_do_idle(); + ret = 0; + goto out_arch_exit; + } + } + + /* + * Replicate the common ARM cpuidle enter function + * (arm_enter_idle_state). + */ + ret = CPU_PM_CPU_IDLE_ENTER(arm_cpuidle_suspend, index); + + if (broadcast) + tick_broadcast_exit(); + +out_arch_exit: + arch_cpu_idle_exit(); + + return ret; +} + +static int suspend_test_thread(void *arg) +{ + int cpu = (long)arg; + int i, nb_suspend = 0, nb_shallow_sleep = 0, nb_err = 0; + struct sched_param sched_priority = { .sched_priority = MAX_RT_PRIO-1 }; + struct cpuidle_device *dev; + struct cpuidle_driver *drv; + /* No need for an actual callback, we just want to wake up the CPU. */ + struct timer_list wakeup_timer = + TIMER_INITIALIZER(dummy_callback, 0, 0); + + /* Wait for the main thread to give the start signal. */ + wait_for_completion(&suspend_threads_started); + + /* Set maximum priority to preempt all other threads on this CPU. */ + if (sched_setscheduler_nocheck(current, SCHED_FIFO, &sched_priority)) + pr_warn("Failed to set suspend thread scheduler on CPU %d\n", + cpu); + + dev = this_cpu_read(cpuidle_devices); + drv = cpuidle_get_cpu_driver(dev); + + pr_info("CPU %d entering suspend cycles, states 1 through %d\n", + cpu, drv->state_count - 1); + + for (i = 0; i < NUM_SUSPEND_CYCLE; ++i) { + int index; + /* + * Test all possible states, except 0 (which is usually WFI and + * doesn't use PSCI). + */ + for (index = 1; index < drv->state_count; ++index) { + struct cpuidle_state *state = &drv->states[index]; + bool broadcast = state->flags & CPUIDLE_FLAG_TIMER_STOP; + int ret; + + /* + * Set the timer to wake this CPU up in some time (which + * should be largely sufficient for entering suspend). + * If the local tick is disabled when entering suspend, + * suspend_cpu() takes care of switching to a broadcast + * tick, so the timer will still wake us up. + */ + mod_timer(&wakeup_timer, jiffies + + usecs_to_jiffies(state->target_residency)); + + /* IRQs must be disabled during suspend operations. */ + local_irq_disable(); + + ret = suspend_cpu(index, broadcast); + + /* + * We have woken up. Re-enable IRQs to handle any + * pending interrupt, do not wait until the end of the + * loop. + */ + local_irq_enable(); + + if (ret == index) { + ++nb_suspend; + } else if (ret >= 0) { + /* We did not enter the expected state. */ + ++nb_shallow_sleep; + } else { + pr_err("Failed to suspend CPU %d: error %d " + "(requested state %d, cycle %d)\n", + cpu, ret, index, i); + ++nb_err; + } + } + } + + /* + * Disable the timer to make sure that the timer will not trigger + * later. + */ + del_timer(&wakeup_timer); + + if (atomic_dec_return_relaxed(&nb_active_threads) == 0) + complete(&suspend_threads_done); + + /* Give up on RT scheduling and wait for termination. */ + sched_priority.sched_priority = 0; + if (sched_setscheduler_nocheck(current, SCHED_NORMAL, &sched_priority)) + pr_warn("Failed to set suspend thread scheduler on CPU %d\n", + cpu); + for (;;) { + /* Needs to be set first to avoid missing a wakeup. */ + set_current_state(TASK_INTERRUPTIBLE); + if (kthread_should_stop()) { + __set_current_state(TASK_RUNNING); + break; + } + schedule(); + } + + pr_info("CPU %d suspend test results: success %d, shallow states %d, errors %d\n", + cpu, nb_suspend, nb_shallow_sleep, nb_err); + + return nb_err; +} + +static int suspend_tests(void) +{ + int i, cpu, err = 0; + struct task_struct **threads; + int nb_threads = 0; + + threads = kmalloc_array(nb_available_cpus, sizeof(*threads), + GFP_KERNEL); + if (!threads) + return -ENOMEM; + + /* + * Stop cpuidle to prevent the idle tasks from entering a deep sleep + * mode, as it might interfere with the suspend threads on other CPUs. + * This does not prevent the suspend threads from using cpuidle (only + * the idle tasks check this status). Take the idle lock so that + * the cpuidle driver and device look-up can be carried out safely. + */ + cpuidle_pause_and_lock(); + + for_each_online_cpu(cpu) { + struct task_struct *thread; + /* Check that cpuidle is available on that CPU. */ + struct cpuidle_device *dev = per_cpu(cpuidle_devices, cpu); + struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev); + + if (!dev || !drv) { + pr_warn("cpuidle not available on CPU %d, ignoring\n", + cpu); + continue; + } + + thread = kthread_create_on_cpu(suspend_test_thread, + (void *)(long)cpu, cpu, + "psci_suspend_test"); + if (IS_ERR(thread)) + pr_err("Failed to create kthread on CPU %d\n", cpu); + else + threads[nb_threads++] = thread; + } + + if (nb_threads < 1) { + err = -ENODEV; + goto out; + } + + atomic_set(&nb_active_threads, nb_threads); + + /* + * Wake up the suspend threads. To avoid the main thread being preempted + * before all the threads have been unparked, the suspend threads will + * wait for the completion of suspend_threads_started. + */ + for (i = 0; i < nb_threads; ++i) + wake_up_process(threads[i]); + complete_all(&suspend_threads_started); + + wait_for_completion(&suspend_threads_done); + + + /* Stop and destroy all threads, get return status. */ + for (i = 0; i < nb_threads; ++i) + err += kthread_stop(threads[i]); + out: + cpuidle_resume_and_unlock(); + kfree(threads); + return err; +} + +static int __init psci_checker(void) +{ + int ret; + + /* + * Since we're in an initcall, we assume that all the CPUs that all + * CPUs that can be onlined have been onlined. + * + * The tests assume that hotplug is enabled but nobody else is using it, + * otherwise the results will be unpredictable. However, since there + * is no userspace yet in initcalls, that should be fine, as long as + * no torture test is running at the same time (see Kconfig). + */ + nb_available_cpus = num_online_cpus(); + + /* Check PSCI operations are set up and working. */ + ret = psci_ops_check(); + if (ret) + return ret; + + pr_info("PSCI checker started using %u CPUs\n", nb_available_cpus); + + pr_info("Starting hotplug tests\n"); + ret = hotplug_tests(); + if (ret == 0) + pr_info("Hotplug tests passed OK\n"); + else if (ret > 0) + pr_err("%d error(s) encountered in hotplug tests\n", ret); + else { + pr_err("Out of memory\n"); + return ret; + } + + pr_info("Starting suspend tests (%d cycles per state)\n", + NUM_SUSPEND_CYCLE); + ret = suspend_tests(); + if (ret == 0) + pr_info("Suspend tests passed OK\n"); + else if (ret > 0) + pr_err("%d error(s) encountered in suspend tests\n", ret); + else { + switch (ret) { + case -ENOMEM: + pr_err("Out of memory\n"); + break; + case -ENODEV: + pr_warn("Could not start suspend tests on any CPU\n"); + break; + } + } + + pr_info("PSCI checker completed\n"); + return ret < 0 ? ret : 0; +} +late_initcall(psci_checker); diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c index d95c702..893f953ea 100644 --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c @@ -28,6 +28,10 @@ #include "qcom_scm.h" +#define SCM_HAS_CORE_CLK BIT(0) +#define SCM_HAS_IFACE_CLK BIT(1) +#define SCM_HAS_BUS_CLK BIT(2) + struct qcom_scm { struct device *dev; struct clk *core_clk; @@ -323,32 +327,40 @@ EXPORT_SYMBOL(qcom_scm_is_available); static int qcom_scm_probe(struct platform_device *pdev) { struct qcom_scm *scm; + unsigned long clks; int ret; scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL); if (!scm) return -ENOMEM; - scm->core_clk = devm_clk_get(&pdev->dev, "core"); - if (IS_ERR(scm->core_clk)) { - if (PTR_ERR(scm->core_clk) == -EPROBE_DEFER) + clks = (unsigned long)of_device_get_match_data(&pdev->dev); + if (clks & SCM_HAS_CORE_CLK) { + scm->core_clk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(scm->core_clk)) { + if (PTR_ERR(scm->core_clk) != -EPROBE_DEFER) + dev_err(&pdev->dev, + "failed to acquire core clk\n"); return PTR_ERR(scm->core_clk); - - scm->core_clk = NULL; + } } - if (of_device_is_compatible(pdev->dev.of_node, "qcom,scm")) { + if (clks & SCM_HAS_IFACE_CLK) { scm->iface_clk = devm_clk_get(&pdev->dev, "iface"); if (IS_ERR(scm->iface_clk)) { if (PTR_ERR(scm->iface_clk) != -EPROBE_DEFER) - dev_err(&pdev->dev, "failed to acquire iface clk\n"); + dev_err(&pdev->dev, + "failed to acquire iface clk\n"); return PTR_ERR(scm->iface_clk); } + } + if (clks & SCM_HAS_BUS_CLK) { scm->bus_clk = devm_clk_get(&pdev->dev, "bus"); if (IS_ERR(scm->bus_clk)) { if (PTR_ERR(scm->bus_clk) != -EPROBE_DEFER) - dev_err(&pdev->dev, "failed to acquire bus clk\n"); + dev_err(&pdev->dev, + "failed to acquire bus clk\n"); return PTR_ERR(scm->bus_clk); } } @@ -356,7 +368,9 @@ static int qcom_scm_probe(struct platform_device *pdev) scm->reset.ops = &qcom_scm_pas_reset_ops; scm->reset.nr_resets = 1; scm->reset.of_node = pdev->dev.of_node; - reset_controller_register(&scm->reset); + ret = devm_reset_controller_register(&pdev->dev, &scm->reset); + if (ret) + return ret; /* vote for max clk rate for highest performance */ ret = clk_set_rate(scm->core_clk, INT_MAX); @@ -372,10 +386,23 @@ static int qcom_scm_probe(struct platform_device *pdev) } static const struct of_device_id qcom_scm_dt_match[] = { - { .compatible = "qcom,scm-apq8064",}, - { .compatible = "qcom,scm-msm8660",}, - { .compatible = "qcom,scm-msm8960",}, - { .compatible = "qcom,scm",}, + { .compatible = "qcom,scm-apq8064", + .data = (void *) SCM_HAS_CORE_CLK, + }, + { .compatible = "qcom,scm-msm8660", + .data = (void *) SCM_HAS_CORE_CLK, + }, + { .compatible = "qcom,scm-msm8960", + .data = (void *) SCM_HAS_CORE_CLK, + }, + { .compatible = "qcom,scm-msm8996", + .data = NULL, /* no clocks */ + }, + { .compatible = "qcom,scm", + .data = (void *)(SCM_HAS_CORE_CLK + | SCM_HAS_IFACE_CLK + | SCM_HAS_BUS_CLK), + }, {} }; diff --git a/drivers/firmware/tegra/Kconfig b/drivers/firmware/tegra/Kconfig new file mode 100644 index 0000000..ff2730d5 --- /dev/null +++ b/drivers/firmware/tegra/Kconfig @@ -0,0 +1,25 @@ +menu "Tegra firmware driver" + +config TEGRA_IVC + bool "Tegra IVC protocol" + depends on ARCH_TEGRA + help + IVC (Inter-VM Communication) protocol is part of the IPC + (Inter Processor Communication) framework on Tegra. It maintains the + data and the different commuication channels in SysRAM or RAM and + keeps the content is synchronization between host CPU and remote + processors. + +config TEGRA_BPMP + bool "Tegra BPMP driver" + depends on ARCH_TEGRA && TEGRA_HSP_MBOX && TEGRA_IVC + help + BPMP (Boot and Power Management Processor) is designed to off-loading + the PM functions which include clock/DVFS/thermal/power from the CPU. + It needs HSP as the HW synchronization and notification module and + IVC module as the message communication protocol. + + This driver manages the IPC interface between host CPU and the + firmware running on BPMP. + +endmenu diff --git a/drivers/firmware/tegra/Makefile b/drivers/firmware/tegra/Makefile new file mode 100644 index 0000000..e34a2f7 --- /dev/null +++ b/drivers/firmware/tegra/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_TEGRA_BPMP) += bpmp.o +obj-$(CONFIG_TEGRA_IVC) += ivc.o diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c new file mode 100644 index 0000000..4ff02d3 --- /dev/null +++ b/drivers/firmware/tegra/bpmp.c @@ -0,0 +1,868 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/clk/tegra.h> +#include <linux/genalloc.h> +#include <linux/mailbox_client.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/semaphore.h> + +#include <soc/tegra/bpmp.h> +#include <soc/tegra/bpmp-abi.h> +#include <soc/tegra/ivc.h> + +#define MSG_ACK BIT(0) +#define MSG_RING BIT(1) + +static inline struct tegra_bpmp * +mbox_client_to_bpmp(struct mbox_client *client) +{ + return container_of(client, struct tegra_bpmp, mbox.client); +} + +struct tegra_bpmp *tegra_bpmp_get(struct device *dev) +{ + struct platform_device *pdev; + struct tegra_bpmp *bpmp; + struct device_node *np; + + np = of_parse_phandle(dev->of_node, "nvidia,bpmp", 0); + if (!np) + return ERR_PTR(-ENOENT); + + pdev = of_find_device_by_node(np); + if (!pdev) { + bpmp = ERR_PTR(-ENODEV); + goto put; + } + + bpmp = platform_get_drvdata(pdev); + if (!bpmp) { + bpmp = ERR_PTR(-EPROBE_DEFER); + put_device(&pdev->dev); + goto put; + } + +put: + of_node_put(np); + return bpmp; +} +EXPORT_SYMBOL_GPL(tegra_bpmp_get); + +void tegra_bpmp_put(struct tegra_bpmp *bpmp) +{ + if (bpmp) + put_device(bpmp->dev); +} +EXPORT_SYMBOL_GPL(tegra_bpmp_put); + +static int tegra_bpmp_channel_get_index(struct tegra_bpmp_channel *channel) +{ + return channel - channel->bpmp->channels; +} + +static int +tegra_bpmp_channel_get_thread_index(struct tegra_bpmp_channel *channel) +{ + struct tegra_bpmp *bpmp = channel->bpmp; + unsigned int offset, count; + int index; + + offset = bpmp->soc->channels.thread.offset; + count = bpmp->soc->channels.thread.count; + + index = tegra_bpmp_channel_get_index(channel); + if (index < 0) + return index; + + if (index < offset || index >= offset + count) + return -EINVAL; + + return index - offset; +} + +static struct tegra_bpmp_channel * +tegra_bpmp_channel_get_thread(struct tegra_bpmp *bpmp, unsigned int index) +{ + unsigned int offset = bpmp->soc->channels.thread.offset; + unsigned int count = bpmp->soc->channels.thread.count; + + if (index >= count) + return NULL; + + return &bpmp->channels[offset + index]; +} + +static struct tegra_bpmp_channel * +tegra_bpmp_channel_get_tx(struct tegra_bpmp *bpmp) +{ + unsigned int offset = bpmp->soc->channels.cpu_tx.offset; + + return &bpmp->channels[offset + smp_processor_id()]; +} + +static struct tegra_bpmp_channel * +tegra_bpmp_channel_get_rx(struct tegra_bpmp *bpmp) +{ + unsigned int offset = bpmp->soc->channels.cpu_rx.offset; + + return &bpmp->channels[offset]; +} + +static bool tegra_bpmp_message_valid(const struct tegra_bpmp_message *msg) +{ + return (msg->tx.size <= MSG_DATA_MIN_SZ) && + (msg->rx.size <= MSG_DATA_MIN_SZ) && + (msg->tx.size == 0 || msg->tx.data) && + (msg->rx.size == 0 || msg->rx.data); +} + +static bool tegra_bpmp_master_acked(struct tegra_bpmp_channel *channel) +{ + void *frame; + + frame = tegra_ivc_read_get_next_frame(channel->ivc); + if (IS_ERR(frame)) { + channel->ib = NULL; + return false; + } + + channel->ib = frame; + + return true; +} + +static int tegra_bpmp_wait_ack(struct tegra_bpmp_channel *channel) +{ + unsigned long timeout = channel->bpmp->soc->channels.cpu_tx.timeout; + ktime_t end; + + end = ktime_add_us(ktime_get(), timeout); + + do { + if (tegra_bpmp_master_acked(channel)) + return 0; + } while (ktime_before(ktime_get(), end)); + + return -ETIMEDOUT; +} + +static bool tegra_bpmp_master_free(struct tegra_bpmp_channel *channel) +{ + void *frame; + + frame = tegra_ivc_write_get_next_frame(channel->ivc); + if (IS_ERR(frame)) { + channel->ob = NULL; + return false; + } + + channel->ob = frame; + + return true; +} + +static int tegra_bpmp_wait_master_free(struct tegra_bpmp_channel *channel) +{ + unsigned long timeout = channel->bpmp->soc->channels.cpu_tx.timeout; + ktime_t start, now; + + start = ns_to_ktime(local_clock()); + + do { + if (tegra_bpmp_master_free(channel)) + return 0; + + now = ns_to_ktime(local_clock()); + } while (ktime_us_delta(now, start) < timeout); + + return -ETIMEDOUT; +} + +static ssize_t __tegra_bpmp_channel_read(struct tegra_bpmp_channel *channel, + void *data, size_t size) +{ + if (data && size > 0) + memcpy(data, channel->ib->data, size); + + return tegra_ivc_read_advance(channel->ivc); +} + +static ssize_t tegra_bpmp_channel_read(struct tegra_bpmp_channel *channel, + void *data, size_t size) +{ + struct tegra_bpmp *bpmp = channel->bpmp; + unsigned long flags; + ssize_t err; + int index; + + index = tegra_bpmp_channel_get_thread_index(channel); + if (index < 0) + return index; + + spin_lock_irqsave(&bpmp->lock, flags); + err = __tegra_bpmp_channel_read(channel, data, size); + clear_bit(index, bpmp->threaded.allocated); + spin_unlock_irqrestore(&bpmp->lock, flags); + + up(&bpmp->threaded.lock); + + return err; +} + +static ssize_t __tegra_bpmp_channel_write(struct tegra_bpmp_channel *channel, + unsigned int mrq, unsigned long flags, + const void *data, size_t size) +{ + channel->ob->code = mrq; + channel->ob->flags = flags; + + if (data && size > 0) + memcpy(channel->ob->data, data, size); + + return tegra_ivc_write_advance(channel->ivc); +} + +static struct tegra_bpmp_channel * +tegra_bpmp_write_threaded(struct tegra_bpmp *bpmp, unsigned int mrq, + const void *data, size_t size) +{ + unsigned long timeout = bpmp->soc->channels.thread.timeout; + unsigned int count = bpmp->soc->channels.thread.count; + struct tegra_bpmp_channel *channel; + unsigned long flags; + unsigned int index; + int err; + + err = down_timeout(&bpmp->threaded.lock, usecs_to_jiffies(timeout)); + if (err < 0) + return ERR_PTR(err); + + spin_lock_irqsave(&bpmp->lock, flags); + + index = find_first_zero_bit(bpmp->threaded.allocated, count); + if (index == count) { + channel = ERR_PTR(-EBUSY); + goto unlock; + } + + channel = tegra_bpmp_channel_get_thread(bpmp, index); + if (!channel) { + channel = ERR_PTR(-EINVAL); + goto unlock; + } + + if (!tegra_bpmp_master_free(channel)) { + channel = ERR_PTR(-EBUSY); + goto unlock; + } + + set_bit(index, bpmp->threaded.allocated); + + err = __tegra_bpmp_channel_write(channel, mrq, MSG_ACK | MSG_RING, + data, size); + if (err < 0) { + clear_bit(index, bpmp->threaded.allocated); + goto unlock; + } + + set_bit(index, bpmp->threaded.busy); + +unlock: + spin_unlock_irqrestore(&bpmp->lock, flags); + return channel; +} + +static ssize_t tegra_bpmp_channel_write(struct tegra_bpmp_channel *channel, + unsigned int mrq, unsigned long flags, + const void *data, size_t size) +{ + int err; + + err = tegra_bpmp_wait_master_free(channel); + if (err < 0) + return err; + + return __tegra_bpmp_channel_write(channel, mrq, flags, data, size); +} + +int tegra_bpmp_transfer_atomic(struct tegra_bpmp *bpmp, + struct tegra_bpmp_message *msg) +{ + struct tegra_bpmp_channel *channel; + int err; + + if (WARN_ON(!irqs_disabled())) + return -EPERM; + + if (!tegra_bpmp_message_valid(msg)) + return -EINVAL; + + channel = tegra_bpmp_channel_get_tx(bpmp); + + err = tegra_bpmp_channel_write(channel, msg->mrq, MSG_ACK, + msg->tx.data, msg->tx.size); + if (err < 0) + return err; + + err = mbox_send_message(bpmp->mbox.channel, NULL); + if (err < 0) + return err; + + mbox_client_txdone(bpmp->mbox.channel, 0); + + err = tegra_bpmp_wait_ack(channel); + if (err < 0) + return err; + + return __tegra_bpmp_channel_read(channel, msg->rx.data, msg->rx.size); +} +EXPORT_SYMBOL_GPL(tegra_bpmp_transfer_atomic); + +int tegra_bpmp_transfer(struct tegra_bpmp *bpmp, + struct tegra_bpmp_message *msg) +{ + struct tegra_bpmp_channel *channel; + unsigned long timeout; + int err; + + if (WARN_ON(irqs_disabled())) + return -EPERM; + + if (!tegra_bpmp_message_valid(msg)) + return -EINVAL; + + channel = tegra_bpmp_write_threaded(bpmp, msg->mrq, msg->tx.data, + msg->tx.size); + if (IS_ERR(channel)) + return PTR_ERR(channel); + + err = mbox_send_message(bpmp->mbox.channel, NULL); + if (err < 0) + return err; + + mbox_client_txdone(bpmp->mbox.channel, 0); + + timeout = usecs_to_jiffies(bpmp->soc->channels.thread.timeout); + + err = wait_for_completion_timeout(&channel->completion, timeout); + if (err == 0) + return -ETIMEDOUT; + + return tegra_bpmp_channel_read(channel, msg->rx.data, msg->rx.size); +} +EXPORT_SYMBOL_GPL(tegra_bpmp_transfer); + +static struct tegra_bpmp_mrq *tegra_bpmp_find_mrq(struct tegra_bpmp *bpmp, + unsigned int mrq) +{ + struct tegra_bpmp_mrq *entry; + + list_for_each_entry(entry, &bpmp->mrqs, list) + if (entry->mrq == mrq) + return entry; + + return NULL; +} + +static void tegra_bpmp_mrq_return(struct tegra_bpmp_channel *channel, + int code, const void *data, size_t size) +{ + unsigned long flags = channel->ib->flags; + struct tegra_bpmp *bpmp = channel->bpmp; + struct tegra_bpmp_mb_data *frame; + int err; + + if (WARN_ON(size > MSG_DATA_MIN_SZ)) + return; + + err = tegra_ivc_read_advance(channel->ivc); + if (WARN_ON(err < 0)) + return; + + if ((flags & MSG_ACK) == 0) + return; + + frame = tegra_ivc_write_get_next_frame(channel->ivc); + if (WARN_ON(IS_ERR(frame))) + return; + + frame->code = code; + + if (data && size > 0) + memcpy(frame->data, data, size); + + err = tegra_ivc_write_advance(channel->ivc); + if (WARN_ON(err < 0)) + return; + + if (flags & MSG_RING) { + err = mbox_send_message(bpmp->mbox.channel, NULL); + if (WARN_ON(err < 0)) + return; + + mbox_client_txdone(bpmp->mbox.channel, 0); + } +} + +static void tegra_bpmp_handle_mrq(struct tegra_bpmp *bpmp, + unsigned int mrq, + struct tegra_bpmp_channel *channel) +{ + struct tegra_bpmp_mrq *entry; + u32 zero = 0; + + spin_lock(&bpmp->lock); + + entry = tegra_bpmp_find_mrq(bpmp, mrq); + if (!entry) { + spin_unlock(&bpmp->lock); + tegra_bpmp_mrq_return(channel, -EINVAL, &zero, sizeof(zero)); + return; + } + + entry->handler(mrq, channel, entry->data); + + spin_unlock(&bpmp->lock); +} + +int tegra_bpmp_request_mrq(struct tegra_bpmp *bpmp, unsigned int mrq, + tegra_bpmp_mrq_handler_t handler, void *data) +{ + struct tegra_bpmp_mrq *entry; + unsigned long flags; + + if (!handler) + return -EINVAL; + + entry = devm_kzalloc(bpmp->dev, sizeof(*entry), GFP_KERNEL); + if (!entry) + return -ENOMEM; + + spin_lock_irqsave(&bpmp->lock, flags); + + entry->mrq = mrq; + entry->handler = handler; + entry->data = data; + list_add(&entry->list, &bpmp->mrqs); + + spin_unlock_irqrestore(&bpmp->lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(tegra_bpmp_request_mrq); + +void tegra_bpmp_free_mrq(struct tegra_bpmp *bpmp, unsigned int mrq, void *data) +{ + struct tegra_bpmp_mrq *entry; + unsigned long flags; + + spin_lock_irqsave(&bpmp->lock, flags); + + entry = tegra_bpmp_find_mrq(bpmp, mrq); + if (!entry) + goto unlock; + + list_del(&entry->list); + devm_kfree(bpmp->dev, entry); + +unlock: + spin_unlock_irqrestore(&bpmp->lock, flags); +} +EXPORT_SYMBOL_GPL(tegra_bpmp_free_mrq); + +static void tegra_bpmp_mrq_handle_ping(unsigned int mrq, + struct tegra_bpmp_channel *channel, + void *data) +{ + struct mrq_ping_request *request; + struct mrq_ping_response response; + + request = (struct mrq_ping_request *)channel->ib->data; + + memset(&response, 0, sizeof(response)); + response.reply = request->challenge << 1; + + tegra_bpmp_mrq_return(channel, 0, &response, sizeof(response)); +} + +static int tegra_bpmp_ping(struct tegra_bpmp *bpmp) +{ + struct mrq_ping_response response; + struct mrq_ping_request request; + struct tegra_bpmp_message msg; + unsigned long flags; + ktime_t start, end; + int err; + + memset(&request, 0, sizeof(request)); + request.challenge = 1; + + memset(&response, 0, sizeof(response)); + + memset(&msg, 0, sizeof(msg)); + msg.mrq = MRQ_PING; + msg.tx.data = &request; + msg.tx.size = sizeof(request); + msg.rx.data = &response; + msg.rx.size = sizeof(response); + + local_irq_save(flags); + start = ktime_get(); + err = tegra_bpmp_transfer_atomic(bpmp, &msg); + end = ktime_get(); + local_irq_restore(flags); + + if (!err) + dev_dbg(bpmp->dev, + "ping ok: challenge: %u, response: %u, time: %lld\n", + request.challenge, response.reply, + ktime_to_us(ktime_sub(end, start))); + + return err; +} + +static int tegra_bpmp_get_firmware_tag(struct tegra_bpmp *bpmp, char *tag, + size_t size) +{ + struct mrq_query_tag_request request; + struct tegra_bpmp_message msg; + unsigned long flags; + dma_addr_t phys; + void *virt; + int err; + + virt = dma_alloc_coherent(bpmp->dev, MSG_DATA_MIN_SZ, &phys, + GFP_KERNEL | GFP_DMA32); + if (!virt) + return -ENOMEM; + + memset(&request, 0, sizeof(request)); + request.addr = phys; + + memset(&msg, 0, sizeof(msg)); + msg.mrq = MRQ_QUERY_TAG; + msg.tx.data = &request; + msg.tx.size = sizeof(request); + + local_irq_save(flags); + err = tegra_bpmp_transfer_atomic(bpmp, &msg); + local_irq_restore(flags); + + if (err == 0) + strlcpy(tag, virt, size); + + dma_free_coherent(bpmp->dev, MSG_DATA_MIN_SZ, virt, phys); + + return err; +} + +static void tegra_bpmp_channel_signal(struct tegra_bpmp_channel *channel) +{ + unsigned long flags = channel->ob->flags; + + if ((flags & MSG_RING) == 0) + return; + + complete(&channel->completion); +} + +static void tegra_bpmp_handle_rx(struct mbox_client *client, void *data) +{ + struct tegra_bpmp *bpmp = mbox_client_to_bpmp(client); + struct tegra_bpmp_channel *channel; + unsigned int i, count; + unsigned long *busy; + + channel = tegra_bpmp_channel_get_rx(bpmp); + count = bpmp->soc->channels.thread.count; + busy = bpmp->threaded.busy; + + if (tegra_bpmp_master_acked(channel)) + tegra_bpmp_handle_mrq(bpmp, channel->ib->code, channel); + + spin_lock(&bpmp->lock); + + for_each_set_bit(i, busy, count) { + struct tegra_bpmp_channel *channel; + + channel = tegra_bpmp_channel_get_thread(bpmp, i); + if (!channel) + continue; + + if (tegra_bpmp_master_acked(channel)) { + tegra_bpmp_channel_signal(channel); + clear_bit(i, busy); + } + } + + spin_unlock(&bpmp->lock); +} + +static void tegra_bpmp_ivc_notify(struct tegra_ivc *ivc, void *data) +{ + struct tegra_bpmp *bpmp = data; + int err; + + if (WARN_ON(bpmp->mbox.channel == NULL)) + return; + + err = mbox_send_message(bpmp->mbox.channel, NULL); + if (err < 0) + return; + + mbox_client_txdone(bpmp->mbox.channel, 0); +} + +static int tegra_bpmp_channel_init(struct tegra_bpmp_channel *channel, + struct tegra_bpmp *bpmp, + unsigned int index) +{ + size_t message_size, queue_size; + unsigned int offset; + int err; + + channel->ivc = devm_kzalloc(bpmp->dev, sizeof(*channel->ivc), + GFP_KERNEL); + if (!channel->ivc) + return -ENOMEM; + + message_size = tegra_ivc_align(MSG_MIN_SZ); + queue_size = tegra_ivc_total_queue_size(message_size); + offset = queue_size * index; + + err = tegra_ivc_init(channel->ivc, NULL, + bpmp->rx.virt + offset, bpmp->rx.phys + offset, + bpmp->tx.virt + offset, bpmp->tx.phys + offset, + 1, message_size, tegra_bpmp_ivc_notify, + bpmp); + if (err < 0) { + dev_err(bpmp->dev, "failed to setup IVC for channel %u: %d\n", + index, err); + return err; + } + + init_completion(&channel->completion); + channel->bpmp = bpmp; + + return 0; +} + +static void tegra_bpmp_channel_reset(struct tegra_bpmp_channel *channel) +{ + /* reset the channel state */ + tegra_ivc_reset(channel->ivc); + + /* sync the channel state with BPMP */ + while (tegra_ivc_notified(channel->ivc)) + ; +} + +static void tegra_bpmp_channel_cleanup(struct tegra_bpmp_channel *channel) +{ + tegra_ivc_cleanup(channel->ivc); +} + +static int tegra_bpmp_probe(struct platform_device *pdev) +{ + struct tegra_bpmp_channel *channel; + struct tegra_bpmp *bpmp; + unsigned int i; + char tag[32]; + size_t size; + int err; + + bpmp = devm_kzalloc(&pdev->dev, sizeof(*bpmp), GFP_KERNEL); + if (!bpmp) + return -ENOMEM; + + bpmp->soc = of_device_get_match_data(&pdev->dev); + bpmp->dev = &pdev->dev; + + bpmp->tx.pool = of_gen_pool_get(pdev->dev.of_node, "shmem", 0); + if (!bpmp->tx.pool) { + dev_err(&pdev->dev, "TX shmem pool not found\n"); + return -ENOMEM; + } + + bpmp->tx.virt = gen_pool_dma_alloc(bpmp->tx.pool, 4096, &bpmp->tx.phys); + if (!bpmp->tx.virt) { + dev_err(&pdev->dev, "failed to allocate from TX pool\n"); + return -ENOMEM; + } + + bpmp->rx.pool = of_gen_pool_get(pdev->dev.of_node, "shmem", 1); + if (!bpmp->rx.pool) { + dev_err(&pdev->dev, "RX shmem pool not found\n"); + err = -ENOMEM; + goto free_tx; + } + + bpmp->rx.virt = gen_pool_dma_alloc(bpmp->rx.pool, 4096, &bpmp->rx.phys); + if (!bpmp->rx.pool) { + dev_err(&pdev->dev, "failed to allocate from RX pool\n"); + err = -ENOMEM; + goto free_tx; + } + + INIT_LIST_HEAD(&bpmp->mrqs); + spin_lock_init(&bpmp->lock); + + bpmp->threaded.count = bpmp->soc->channels.thread.count; + sema_init(&bpmp->threaded.lock, bpmp->threaded.count); + + size = BITS_TO_LONGS(bpmp->threaded.count) * sizeof(long); + + bpmp->threaded.allocated = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); + if (!bpmp->threaded.allocated) { + err = -ENOMEM; + goto free_rx; + } + + bpmp->threaded.busy = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); + if (!bpmp->threaded.busy) { + err = -ENOMEM; + goto free_rx; + } + + bpmp->num_channels = bpmp->soc->channels.cpu_tx.count + + bpmp->soc->channels.thread.count + + bpmp->soc->channels.cpu_rx.count; + + bpmp->channels = devm_kcalloc(&pdev->dev, bpmp->num_channels, + sizeof(*channel), GFP_KERNEL); + if (!bpmp->channels) { + err = -ENOMEM; + goto free_rx; + } + + /* message channel initialization */ + for (i = 0; i < bpmp->num_channels; i++) { + struct tegra_bpmp_channel *channel = &bpmp->channels[i]; + + err = tegra_bpmp_channel_init(channel, bpmp, i); + if (err < 0) + goto cleanup_channels; + } + + /* mbox registration */ + bpmp->mbox.client.dev = &pdev->dev; + bpmp->mbox.client.rx_callback = tegra_bpmp_handle_rx; + bpmp->mbox.client.tx_block = false; + bpmp->mbox.client.knows_txdone = false; + + bpmp->mbox.channel = mbox_request_channel(&bpmp->mbox.client, 0); + if (IS_ERR(bpmp->mbox.channel)) { + err = PTR_ERR(bpmp->mbox.channel); + dev_err(&pdev->dev, "failed to get HSP mailbox: %d\n", err); + goto cleanup_channels; + } + + /* reset message channels */ + for (i = 0; i < bpmp->num_channels; i++) { + struct tegra_bpmp_channel *channel = &bpmp->channels[i]; + + tegra_bpmp_channel_reset(channel); + } + + err = tegra_bpmp_request_mrq(bpmp, MRQ_PING, + tegra_bpmp_mrq_handle_ping, bpmp); + if (err < 0) + goto free_mbox; + + err = tegra_bpmp_ping(bpmp); + if (err < 0) { + dev_err(&pdev->dev, "failed to ping BPMP: %d\n", err); + goto free_mrq; + } + + err = tegra_bpmp_get_firmware_tag(bpmp, tag, sizeof(tag) - 1); + if (err < 0) { + dev_err(&pdev->dev, "failed to get firmware tag: %d\n", err); + goto free_mrq; + } + + dev_info(&pdev->dev, "firmware: %s\n", tag); + + err = of_platform_default_populate(pdev->dev.of_node, NULL, &pdev->dev); + if (err < 0) + goto free_mrq; + + err = tegra_bpmp_init_clocks(bpmp); + if (err < 0) + goto free_mrq; + + err = tegra_bpmp_init_resets(bpmp); + if (err < 0) + goto free_mrq; + + platform_set_drvdata(pdev, bpmp); + + return 0; + +free_mrq: + tegra_bpmp_free_mrq(bpmp, MRQ_PING, bpmp); +free_mbox: + mbox_free_channel(bpmp->mbox.channel); +cleanup_channels: + while (i--) + tegra_bpmp_channel_cleanup(&bpmp->channels[i]); +free_rx: + gen_pool_free(bpmp->rx.pool, (unsigned long)bpmp->rx.virt, 4096); +free_tx: + gen_pool_free(bpmp->tx.pool, (unsigned long)bpmp->tx.virt, 4096); + return err; +} + +static const struct tegra_bpmp_soc tegra186_soc = { + .channels = { + .cpu_tx = { + .offset = 0, + .count = 6, + .timeout = 60 * USEC_PER_SEC, + }, + .thread = { + .offset = 6, + .count = 7, + .timeout = 600 * USEC_PER_SEC, + }, + .cpu_rx = { + .offset = 13, + .count = 1, + .timeout = 0, + }, + }, + .num_resets = 193, +}; + +static const struct of_device_id tegra_bpmp_match[] = { + { .compatible = "nvidia,tegra186-bpmp", .data = &tegra186_soc }, + { } +}; + +static struct platform_driver tegra_bpmp_driver = { + .driver = { + .name = "tegra-bpmp", + .of_match_table = tegra_bpmp_match, + }, + .probe = tegra_bpmp_probe, +}; + +static int __init tegra_bpmp_init(void) +{ + return platform_driver_register(&tegra_bpmp_driver); +} +core_initcall(tegra_bpmp_init); diff --git a/drivers/firmware/tegra/ivc.c b/drivers/firmware/tegra/ivc.c new file mode 100644 index 0000000..29ecfd8 --- /dev/null +++ b/drivers/firmware/tegra/ivc.c @@ -0,0 +1,695 @@ +/* + * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <soc/tegra/ivc.h> + +#define TEGRA_IVC_ALIGN 64 + +/* + * IVC channel reset protocol. + * + * Each end uses its tx_channel.state to indicate its synchronization state. + */ +enum tegra_ivc_state { + /* + * This value is zero for backwards compatibility with services that + * assume channels to be initially zeroed. Such channels are in an + * initially valid state, but cannot be asynchronously reset, and must + * maintain a valid state at all times. + * + * The transmitting end can enter the established state from the sync or + * ack state when it observes the receiving endpoint in the ack or + * established state, indicating that has cleared the counters in our + * rx_channel. + */ + TEGRA_IVC_STATE_ESTABLISHED = 0, + + /* + * If an endpoint is observed in the sync state, the remote endpoint is + * allowed to clear the counters it owns asynchronously with respect to + * the current endpoint. Therefore, the current endpoint is no longer + * allowed to communicate. + */ + TEGRA_IVC_STATE_SYNC, + + /* + * When the transmitting end observes the receiving end in the sync + * state, it can clear the w_count and r_count and transition to the ack + * state. If the remote endpoint observes us in the ack state, it can + * return to the established state once it has cleared its counters. + */ + TEGRA_IVC_STATE_ACK +}; + +/* + * This structure is divided into two-cache aligned parts, the first is only + * written through the tx.channel pointer, while the second is only written + * through the rx.channel pointer. This delineates ownership of the cache + * lines, which is critical to performance and necessary in non-cache coherent + * implementations. + */ +struct tegra_ivc_header { + union { + struct { + /* fields owned by the transmitting end */ + u32 count; + u32 state; + }; + + u8 pad[TEGRA_IVC_ALIGN]; + } tx; + + union { + /* fields owned by the receiving end */ + u32 count; + u8 pad[TEGRA_IVC_ALIGN]; + } rx; +}; + +static inline void tegra_ivc_invalidate(struct tegra_ivc *ivc, dma_addr_t phys) +{ + if (!ivc->peer) + return; + + dma_sync_single_for_cpu(ivc->peer, phys, TEGRA_IVC_ALIGN, + DMA_FROM_DEVICE); +} + +static inline void tegra_ivc_flush(struct tegra_ivc *ivc, dma_addr_t phys) +{ + if (!ivc->peer) + return; + + dma_sync_single_for_device(ivc->peer, phys, TEGRA_IVC_ALIGN, + DMA_TO_DEVICE); +} + +static inline bool tegra_ivc_empty(struct tegra_ivc *ivc, + struct tegra_ivc_header *header) +{ + /* + * This function performs multiple checks on the same values with + * security implications, so create snapshots with ACCESS_ONCE() to + * ensure that these checks use the same values. + */ + u32 tx = ACCESS_ONCE(header->tx.count); + u32 rx = ACCESS_ONCE(header->rx.count); + + /* + * Perform an over-full check to prevent denial of service attacks + * where a server could be easily fooled into believing that there's + * an extremely large number of frames ready, since receivers are not + * expected to check for full or over-full conditions. + * + * Although the channel isn't empty, this is an invalid case caused by + * a potentially malicious peer, so returning empty is safer, because + * it gives the impression that the channel has gone silent. + */ + if (tx - rx > ivc->num_frames) + return true; + + return tx == rx; +} + +static inline bool tegra_ivc_full(struct tegra_ivc *ivc, + struct tegra_ivc_header *header) +{ + u32 tx = ACCESS_ONCE(header->tx.count); + u32 rx = ACCESS_ONCE(header->rx.count); + + /* + * Invalid cases where the counters indicate that the queue is over + * capacity also appear full. + */ + return tx - rx >= ivc->num_frames; +} + +static inline u32 tegra_ivc_available(struct tegra_ivc *ivc, + struct tegra_ivc_header *header) +{ + u32 tx = ACCESS_ONCE(header->tx.count); + u32 rx = ACCESS_ONCE(header->rx.count); + + /* + * This function isn't expected to be used in scenarios where an + * over-full situation can lead to denial of service attacks. See the + * comment in tegra_ivc_empty() for an explanation about special + * over-full considerations. + */ + return tx - rx; +} + +static inline void tegra_ivc_advance_tx(struct tegra_ivc *ivc) +{ + ACCESS_ONCE(ivc->tx.channel->tx.count) = + ACCESS_ONCE(ivc->tx.channel->tx.count) + 1; + + if (ivc->tx.position == ivc->num_frames - 1) + ivc->tx.position = 0; + else + ivc->tx.position++; +} + +static inline void tegra_ivc_advance_rx(struct tegra_ivc *ivc) +{ + ACCESS_ONCE(ivc->rx.channel->rx.count) = + ACCESS_ONCE(ivc->rx.channel->rx.count) + 1; + + if (ivc->rx.position == ivc->num_frames - 1) + ivc->rx.position = 0; + else + ivc->rx.position++; +} + +static inline int tegra_ivc_check_read(struct tegra_ivc *ivc) +{ + unsigned int offset = offsetof(struct tegra_ivc_header, tx.count); + + /* + * tx.channel->state is set locally, so it is not synchronized with + * state from the remote peer. The remote peer cannot reset its + * transmit counters until we've acknowledged its synchronization + * request, so no additional synchronization is required because an + * asynchronous transition of rx.channel->state to + * TEGRA_IVC_STATE_ACK is not allowed. + */ + if (ivc->tx.channel->tx.state != TEGRA_IVC_STATE_ESTABLISHED) + return -ECONNRESET; + + /* + * Avoid unnecessary invalidations when performing repeated accesses + * to an IVC channel by checking the old queue pointers first. + * + * Synchronization is only necessary when these pointers indicate + * empty or full. + */ + if (!tegra_ivc_empty(ivc, ivc->rx.channel)) + return 0; + + tegra_ivc_invalidate(ivc, ivc->rx.phys + offset); + + if (tegra_ivc_empty(ivc, ivc->rx.channel)) + return -ENOSPC; + + return 0; +} + +static inline int tegra_ivc_check_write(struct tegra_ivc *ivc) +{ + unsigned int offset = offsetof(struct tegra_ivc_header, rx.count); + + if (ivc->tx.channel->tx.state != TEGRA_IVC_STATE_ESTABLISHED) + return -ECONNRESET; + + if (!tegra_ivc_full(ivc, ivc->tx.channel)) + return 0; + + tegra_ivc_invalidate(ivc, ivc->tx.phys + offset); + + if (tegra_ivc_full(ivc, ivc->tx.channel)) + return -ENOSPC; + + return 0; +} + +static void *tegra_ivc_frame_virt(struct tegra_ivc *ivc, + struct tegra_ivc_header *header, + unsigned int frame) +{ + if (WARN_ON(frame >= ivc->num_frames)) + return ERR_PTR(-EINVAL); + + return (void *)(header + 1) + ivc->frame_size * frame; +} + +static inline dma_addr_t tegra_ivc_frame_phys(struct tegra_ivc *ivc, + dma_addr_t phys, + unsigned int frame) +{ + unsigned long offset; + + offset = sizeof(struct tegra_ivc_header) + ivc->frame_size * frame; + + return phys + offset; +} + +static inline void tegra_ivc_invalidate_frame(struct tegra_ivc *ivc, + dma_addr_t phys, + unsigned int frame, + unsigned int offset, + size_t size) +{ + if (!ivc->peer || WARN_ON(frame >= ivc->num_frames)) + return; + + phys = tegra_ivc_frame_phys(ivc, phys, frame) + offset; + + dma_sync_single_for_cpu(ivc->peer, phys, size, DMA_FROM_DEVICE); +} + +static inline void tegra_ivc_flush_frame(struct tegra_ivc *ivc, + dma_addr_t phys, + unsigned int frame, + unsigned int offset, + size_t size) +{ + if (!ivc->peer || WARN_ON(frame >= ivc->num_frames)) + return; + + phys = tegra_ivc_frame_phys(ivc, phys, frame) + offset; + + dma_sync_single_for_device(ivc->peer, phys, size, DMA_TO_DEVICE); +} + +/* directly peek at the next frame rx'ed */ +void *tegra_ivc_read_get_next_frame(struct tegra_ivc *ivc) +{ + int err; + + if (WARN_ON(ivc == NULL)) + return ERR_PTR(-EINVAL); + + err = tegra_ivc_check_read(ivc); + if (err < 0) + return ERR_PTR(err); + + /* + * Order observation of ivc->rx.position potentially indicating new + * data before data read. + */ + smp_rmb(); + + tegra_ivc_invalidate_frame(ivc, ivc->rx.phys, ivc->rx.position, 0, + ivc->frame_size); + + return tegra_ivc_frame_virt(ivc, ivc->rx.channel, ivc->rx.position); +} +EXPORT_SYMBOL(tegra_ivc_read_get_next_frame); + +int tegra_ivc_read_advance(struct tegra_ivc *ivc) +{ + unsigned int rx = offsetof(struct tegra_ivc_header, rx.count); + unsigned int tx = offsetof(struct tegra_ivc_header, tx.count); + int err; + + /* + * No read barriers or synchronization here: the caller is expected to + * have already observed the channel non-empty. This check is just to + * catch programming errors. + */ + err = tegra_ivc_check_read(ivc); + if (err < 0) + return err; + + tegra_ivc_advance_rx(ivc); + + tegra_ivc_flush(ivc, ivc->rx.phys + rx); + + /* + * Ensure our write to ivc->rx.position occurs before our read from + * ivc->tx.position. + */ + smp_mb(); + + /* + * Notify only upon transition from full to non-full. The available + * count can only asynchronously increase, so the worst possible + * side-effect will be a spurious notification. + */ + tegra_ivc_invalidate(ivc, ivc->rx.phys + tx); + + if (tegra_ivc_available(ivc, ivc->rx.channel) == ivc->num_frames - 1) + ivc->notify(ivc, ivc->notify_data); + + return 0; +} +EXPORT_SYMBOL(tegra_ivc_read_advance); + +/* directly poke at the next frame to be tx'ed */ +void *tegra_ivc_write_get_next_frame(struct tegra_ivc *ivc) +{ + int err; + + err = tegra_ivc_check_write(ivc); + if (err < 0) + return ERR_PTR(err); + + return tegra_ivc_frame_virt(ivc, ivc->tx.channel, ivc->tx.position); +} +EXPORT_SYMBOL(tegra_ivc_write_get_next_frame); + +/* advance the tx buffer */ +int tegra_ivc_write_advance(struct tegra_ivc *ivc) +{ + unsigned int tx = offsetof(struct tegra_ivc_header, tx.count); + unsigned int rx = offsetof(struct tegra_ivc_header, rx.count); + int err; + + err = tegra_ivc_check_write(ivc); + if (err < 0) + return err; + + tegra_ivc_flush_frame(ivc, ivc->tx.phys, ivc->tx.position, 0, + ivc->frame_size); + + /* + * Order any possible stores to the frame before update of + * ivc->tx.position. + */ + smp_wmb(); + + tegra_ivc_advance_tx(ivc); + tegra_ivc_flush(ivc, ivc->tx.phys + tx); + + /* + * Ensure our write to ivc->tx.position occurs before our read from + * ivc->rx.position. + */ + smp_mb(); + + /* + * Notify only upon transition from empty to non-empty. The available + * count can only asynchronously decrease, so the worst possible + * side-effect will be a spurious notification. + */ + tegra_ivc_invalidate(ivc, ivc->tx.phys + rx); + + if (tegra_ivc_available(ivc, ivc->tx.channel) == 1) + ivc->notify(ivc, ivc->notify_data); + + return 0; +} +EXPORT_SYMBOL(tegra_ivc_write_advance); + +void tegra_ivc_reset(struct tegra_ivc *ivc) +{ + unsigned int offset = offsetof(struct tegra_ivc_header, tx.count); + + ivc->tx.channel->tx.state = TEGRA_IVC_STATE_SYNC; + tegra_ivc_flush(ivc, ivc->tx.phys + offset); + ivc->notify(ivc, ivc->notify_data); +} +EXPORT_SYMBOL(tegra_ivc_reset); + +/* + * ======================================================= + * IVC State Transition Table - see tegra_ivc_notified() + * ======================================================= + * + * local remote action + * ----- ------ ----------------------------------- + * SYNC EST <none> + * SYNC ACK reset counters; move to EST; notify + * SYNC SYNC reset counters; move to ACK; notify + * ACK EST move to EST; notify + * ACK ACK move to EST; notify + * ACK SYNC reset counters; move to ACK; notify + * EST EST <none> + * EST ACK <none> + * EST SYNC reset counters; move to ACK; notify + * + * =============================================================== + */ + +int tegra_ivc_notified(struct tegra_ivc *ivc) +{ + unsigned int offset = offsetof(struct tegra_ivc_header, tx.count); + enum tegra_ivc_state state; + + /* Copy the receiver's state out of shared memory. */ + tegra_ivc_invalidate(ivc, ivc->rx.phys + offset); + state = ACCESS_ONCE(ivc->rx.channel->tx.state); + + if (state == TEGRA_IVC_STATE_SYNC) { + offset = offsetof(struct tegra_ivc_header, tx.count); + + /* + * Order observation of TEGRA_IVC_STATE_SYNC before stores + * clearing tx.channel. + */ + smp_rmb(); + + /* + * Reset tx.channel counters. The remote end is in the SYNC + * state and won't make progress until we change our state, + * so the counters are not in use at this time. + */ + ivc->tx.channel->tx.count = 0; + ivc->rx.channel->rx.count = 0; + + ivc->tx.position = 0; + ivc->rx.position = 0; + + /* + * Ensure that counters appear cleared before new state can be + * observed. + */ + smp_wmb(); + + /* + * Move to ACK state. We have just cleared our counters, so it + * is now safe for the remote end to start using these values. + */ + ivc->tx.channel->tx.state = TEGRA_IVC_STATE_ACK; + tegra_ivc_flush(ivc, ivc->tx.phys + offset); + + /* + * Notify remote end to observe state transition. + */ + ivc->notify(ivc, ivc->notify_data); + + } else if (ivc->tx.channel->tx.state == TEGRA_IVC_STATE_SYNC && + state == TEGRA_IVC_STATE_ACK) { + offset = offsetof(struct tegra_ivc_header, tx.count); + + /* + * Order observation of ivc_state_sync before stores clearing + * tx_channel. + */ + smp_rmb(); + + /* + * Reset tx.channel counters. The remote end is in the ACK + * state and won't make progress until we change our state, + * so the counters are not in use at this time. + */ + ivc->tx.channel->tx.count = 0; + ivc->rx.channel->rx.count = 0; + + ivc->tx.position = 0; + ivc->rx.position = 0; + + /* + * Ensure that counters appear cleared before new state can be + * observed. + */ + smp_wmb(); + + /* + * Move to ESTABLISHED state. We know that the remote end has + * already cleared its counters, so it is safe to start + * writing/reading on this channel. + */ + ivc->tx.channel->tx.state = TEGRA_IVC_STATE_ESTABLISHED; + tegra_ivc_flush(ivc, ivc->tx.phys + offset); + + /* + * Notify remote end to observe state transition. + */ + ivc->notify(ivc, ivc->notify_data); + + } else if (ivc->tx.channel->tx.state == TEGRA_IVC_STATE_ACK) { + offset = offsetof(struct tegra_ivc_header, tx.count); + + /* + * At this point, we have observed the peer to be in either + * the ACK or ESTABLISHED state. Next, order observation of + * peer state before storing to tx.channel. + */ + smp_rmb(); + + /* + * Move to ESTABLISHED state. We know that we have previously + * cleared our counters, and we know that the remote end has + * cleared its counters, so it is safe to start writing/reading + * on this channel. + */ + ivc->tx.channel->tx.state = TEGRA_IVC_STATE_ESTABLISHED; + tegra_ivc_flush(ivc, ivc->tx.phys + offset); + + /* + * Notify remote end to observe state transition. + */ + ivc->notify(ivc, ivc->notify_data); + + } else { + /* + * There is no need to handle any further action. Either the + * channel is already fully established, or we are waiting for + * the remote end to catch up with our current state. Refer + * to the diagram in "IVC State Transition Table" above. + */ + } + + if (ivc->tx.channel->tx.state != TEGRA_IVC_STATE_ESTABLISHED) + return -EAGAIN; + + return 0; +} +EXPORT_SYMBOL(tegra_ivc_notified); + +size_t tegra_ivc_align(size_t size) +{ + return ALIGN(size, TEGRA_IVC_ALIGN); +} +EXPORT_SYMBOL(tegra_ivc_align); + +unsigned tegra_ivc_total_queue_size(unsigned queue_size) +{ + if (!IS_ALIGNED(queue_size, TEGRA_IVC_ALIGN)) { + pr_err("%s: queue_size (%u) must be %u-byte aligned\n", + __func__, queue_size, TEGRA_IVC_ALIGN); + return 0; + } + + return queue_size + sizeof(struct tegra_ivc_header); +} +EXPORT_SYMBOL(tegra_ivc_total_queue_size); + +static int tegra_ivc_check_params(unsigned long rx, unsigned long tx, + unsigned int num_frames, size_t frame_size) +{ + BUILD_BUG_ON(!IS_ALIGNED(offsetof(struct tegra_ivc_header, tx.count), + TEGRA_IVC_ALIGN)); + BUILD_BUG_ON(!IS_ALIGNED(offsetof(struct tegra_ivc_header, rx.count), + TEGRA_IVC_ALIGN)); + BUILD_BUG_ON(!IS_ALIGNED(sizeof(struct tegra_ivc_header), + TEGRA_IVC_ALIGN)); + + if ((uint64_t)num_frames * (uint64_t)frame_size >= 0x100000000UL) { + pr_err("num_frames * frame_size overflows\n"); + return -EINVAL; + } + + if (!IS_ALIGNED(frame_size, TEGRA_IVC_ALIGN)) { + pr_err("frame size not adequately aligned: %zu\n", frame_size); + return -EINVAL; + } + + /* + * The headers must at least be aligned enough for counters + * to be accessed atomically. + */ + if (!IS_ALIGNED(rx, TEGRA_IVC_ALIGN)) { + pr_err("IVC channel start not aligned: %#lx\n", rx); + return -EINVAL; + } + + if (!IS_ALIGNED(tx, TEGRA_IVC_ALIGN)) { + pr_err("IVC channel start not aligned: %#lx\n", tx); + return -EINVAL; + } + + if (rx < tx) { + if (rx + frame_size * num_frames > tx) { + pr_err("queue regions overlap: %#lx + %zx > %#lx\n", + rx, frame_size * num_frames, tx); + return -EINVAL; + } + } else { + if (tx + frame_size * num_frames > rx) { + pr_err("queue regions overlap: %#lx + %zx > %#lx\n", + tx, frame_size * num_frames, rx); + return -EINVAL; + } + } + + return 0; +} + +int tegra_ivc_init(struct tegra_ivc *ivc, struct device *peer, void *rx, + dma_addr_t rx_phys, void *tx, dma_addr_t tx_phys, + unsigned int num_frames, size_t frame_size, + void (*notify)(struct tegra_ivc *ivc, void *data), + void *data) +{ + size_t queue_size; + int err; + + if (WARN_ON(!ivc || !notify)) + return -EINVAL; + + /* + * All sizes that can be returned by communication functions should + * fit in an int. + */ + if (frame_size > INT_MAX) + return -E2BIG; + + err = tegra_ivc_check_params((unsigned long)rx, (unsigned long)tx, + num_frames, frame_size); + if (err < 0) + return err; + + queue_size = tegra_ivc_total_queue_size(num_frames * frame_size); + + if (peer) { + ivc->rx.phys = dma_map_single(peer, rx, queue_size, + DMA_BIDIRECTIONAL); + if (ivc->rx.phys == DMA_ERROR_CODE) + return -ENOMEM; + + ivc->tx.phys = dma_map_single(peer, tx, queue_size, + DMA_BIDIRECTIONAL); + if (ivc->tx.phys == DMA_ERROR_CODE) { + dma_unmap_single(peer, ivc->rx.phys, queue_size, + DMA_BIDIRECTIONAL); + return -ENOMEM; + } + } else { + ivc->rx.phys = rx_phys; + ivc->tx.phys = tx_phys; + } + + ivc->rx.channel = rx; + ivc->tx.channel = tx; + ivc->peer = peer; + ivc->notify = notify; + ivc->notify_data = data; + ivc->frame_size = frame_size; + ivc->num_frames = num_frames; + + /* + * These values aren't necessarily correct until the channel has been + * reset. + */ + ivc->tx.position = 0; + ivc->rx.position = 0; + + return 0; +} +EXPORT_SYMBOL(tegra_ivc_init); + +void tegra_ivc_cleanup(struct tegra_ivc *ivc) +{ + if (ivc->peer) { + size_t size = tegra_ivc_total_queue_size(ivc->num_frames * + ivc->frame_size); + + dma_unmap_single(ivc->peer, ivc->rx.phys, size, + DMA_BIDIRECTIONAL); + dma_unmap_single(ivc->peer, ivc->tx.phys, size, + DMA_BIDIRECTIONAL); + } +} +EXPORT_SYMBOL(tegra_ivc_cleanup); diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c new file mode 100644 index 0000000..874ff32 --- /dev/null +++ b/drivers/firmware/ti_sci.c @@ -0,0 +1,1991 @@ +/* + * Texas Instruments System Control Interface Protocol Driver + * + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Nishanth Menon + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#include <linux/bitmap.h> +#include <linux/debugfs.h> +#include <linux/export.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mailbox_client.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/semaphore.h> +#include <linux/slab.h> +#include <linux/soc/ti/ti-msgmgr.h> +#include <linux/soc/ti/ti_sci_protocol.h> +#include <linux/reboot.h> + +#include "ti_sci.h" + +/* List of all TI SCI devices active in system */ +static LIST_HEAD(ti_sci_list); +/* Protection for the entire list */ +static DEFINE_MUTEX(ti_sci_list_mutex); + +/** + * struct ti_sci_xfer - Structure representing a message flow + * @tx_message: Transmit message + * @rx_len: Receive message length + * @xfer_buf: Preallocated buffer to store receive message + * Since we work with request-ACK protocol, we can + * reuse the same buffer for the rx path as we + * use for the tx path. + * @done: completion event + */ +struct ti_sci_xfer { + struct ti_msgmgr_message tx_message; + u8 rx_len; + u8 *xfer_buf; + struct completion done; +}; + +/** + * struct ti_sci_xfers_info - Structure to manage transfer information + * @sem_xfer_count: Counting Semaphore for managing max simultaneous + * Messages. + * @xfer_block: Preallocated Message array + * @xfer_alloc_table: Bitmap table for allocated messages. + * Index of this bitmap table is also used for message + * sequence identifier. + * @xfer_lock: Protection for message allocation + */ +struct ti_sci_xfers_info { + struct semaphore sem_xfer_count; + struct ti_sci_xfer *xfer_block; + unsigned long *xfer_alloc_table; + /* protect transfer allocation */ + spinlock_t xfer_lock; +}; + +/** + * struct ti_sci_desc - Description of SoC integration + * @host_id: Host identifier representing the compute entity + * @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds) + * @max_msgs: Maximum number of messages that can be pending + * simultaneously in the system + * @max_msg_size: Maximum size of data per message that can be handled. + */ +struct ti_sci_desc { + u8 host_id; + int max_rx_timeout_ms; + int max_msgs; + int max_msg_size; +}; + +/** + * struct ti_sci_info - Structure representing a TI SCI instance + * @dev: Device pointer + * @desc: SoC description for this instance + * @nb: Reboot Notifier block + * @d: Debugfs file entry + * @debug_region: Memory region where the debug message are available + * @debug_region_size: Debug region size + * @debug_buffer: Buffer allocated to copy debug messages. + * @handle: Instance of TI SCI handle to send to clients. + * @cl: Mailbox Client + * @chan_tx: Transmit mailbox channel + * @chan_rx: Receive mailbox channel + * @minfo: Message info + * @node: list head + * @users: Number of users of this instance + */ +struct ti_sci_info { + struct device *dev; + struct notifier_block nb; + const struct ti_sci_desc *desc; + struct dentry *d; + void __iomem *debug_region; + char *debug_buffer; + size_t debug_region_size; + struct ti_sci_handle handle; + struct mbox_client cl; + struct mbox_chan *chan_tx; + struct mbox_chan *chan_rx; + struct ti_sci_xfers_info minfo; + struct list_head node; + /* protected by ti_sci_list_mutex */ + int users; + +}; + +#define cl_to_ti_sci_info(c) container_of(c, struct ti_sci_info, cl) +#define handle_to_ti_sci_info(h) container_of(h, struct ti_sci_info, handle) +#define reboot_to_ti_sci_info(n) container_of(n, struct ti_sci_info, nb) + +#ifdef CONFIG_DEBUG_FS + +/** + * ti_sci_debug_show() - Helper to dump the debug log + * @s: sequence file pointer + * @unused: unused. + * + * Return: 0 + */ +static int ti_sci_debug_show(struct seq_file *s, void *unused) +{ + struct ti_sci_info *info = s->private; + + memcpy_fromio(info->debug_buffer, info->debug_region, + info->debug_region_size); + /* + * We don't trust firmware to leave NULL terminated last byte (hence + * we have allocated 1 extra 0 byte). Since we cannot guarantee any + * specific data format for debug messages, We just present the data + * in the buffer as is - we expect the messages to be self explanatory. + */ + seq_puts(s, info->debug_buffer); + return 0; +} + +/** + * ti_sci_debug_open() - debug file open + * @inode: inode pointer + * @file: file pointer + * + * Return: result of single_open + */ +static int ti_sci_debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, ti_sci_debug_show, inode->i_private); +} + +/* log file operations */ +static const struct file_operations ti_sci_debug_fops = { + .open = ti_sci_debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/** + * ti_sci_debugfs_create() - Create log debug file + * @pdev: platform device pointer + * @info: Pointer to SCI entity information + * + * Return: 0 if all went fine, else corresponding error. + */ +static int ti_sci_debugfs_create(struct platform_device *pdev, + struct ti_sci_info *info) +{ + struct device *dev = &pdev->dev; + struct resource *res; + char debug_name[50] = "ti_sci_debug@"; + + /* Debug region is optional */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "debug_messages"); + info->debug_region = devm_ioremap_resource(dev, res); + if (IS_ERR(info->debug_region)) + return 0; + info->debug_region_size = resource_size(res); + + info->debug_buffer = devm_kcalloc(dev, info->debug_region_size + 1, + sizeof(char), GFP_KERNEL); + if (!info->debug_buffer) + return -ENOMEM; + /* Setup NULL termination */ + info->debug_buffer[info->debug_region_size] = 0; + + info->d = debugfs_create_file(strncat(debug_name, dev_name(dev), + sizeof(debug_name)), + 0444, NULL, info, &ti_sci_debug_fops); + if (IS_ERR(info->d)) + return PTR_ERR(info->d); + + dev_dbg(dev, "Debug region => %p, size = %zu bytes, resource: %pr\n", + info->debug_region, info->debug_region_size, res); + return 0; +} + +/** + * ti_sci_debugfs_destroy() - clean up log debug file + * @pdev: platform device pointer + * @info: Pointer to SCI entity information + */ +static void ti_sci_debugfs_destroy(struct platform_device *pdev, + struct ti_sci_info *info) +{ + if (IS_ERR(info->debug_region)) + return; + + debugfs_remove(info->d); +} +#else /* CONFIG_DEBUG_FS */ +static inline int ti_sci_debugfs_create(struct platform_device *dev, + struct ti_sci_info *info) +{ + return 0; +} + +static inline void ti_sci_debugfs_destroy(struct platform_device *dev, + struct ti_sci_info *info) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +/** + * ti_sci_dump_header_dbg() - Helper to dump a message header. + * @dev: Device pointer corresponding to the SCI entity + * @hdr: pointer to header. + */ +static inline void ti_sci_dump_header_dbg(struct device *dev, + struct ti_sci_msg_hdr *hdr) +{ + dev_dbg(dev, "MSGHDR:type=0x%04x host=0x%02x seq=0x%02x flags=0x%08x\n", + hdr->type, hdr->host, hdr->seq, hdr->flags); +} + +/** + * ti_sci_rx_callback() - mailbox client callback for receive messages + * @cl: client pointer + * @m: mailbox message + * + * Processes one received message to appropriate transfer information and + * signals completion of the transfer. + * + * NOTE: This function will be invoked in IRQ context, hence should be + * as optimal as possible. + */ +static void ti_sci_rx_callback(struct mbox_client *cl, void *m) +{ + struct ti_sci_info *info = cl_to_ti_sci_info(cl); + struct device *dev = info->dev; + struct ti_sci_xfers_info *minfo = &info->minfo; + struct ti_msgmgr_message *mbox_msg = m; + struct ti_sci_msg_hdr *hdr = (struct ti_sci_msg_hdr *)mbox_msg->buf; + struct ti_sci_xfer *xfer; + u8 xfer_id; + + xfer_id = hdr->seq; + + /* + * Are we even expecting this? + * NOTE: barriers were implicit in locks used for modifying the bitmap + */ + if (!test_bit(xfer_id, minfo->xfer_alloc_table)) { + dev_err(dev, "Message for %d is not expected!\n", xfer_id); + return; + } + + xfer = &minfo->xfer_block[xfer_id]; + + /* Is the message of valid length? */ + if (mbox_msg->len > info->desc->max_msg_size) { + dev_err(dev, "Unable to handle %d xfer(max %d)\n", + mbox_msg->len, info->desc->max_msg_size); + ti_sci_dump_header_dbg(dev, hdr); + return; + } + if (mbox_msg->len < xfer->rx_len) { + dev_err(dev, "Recv xfer %d < expected %d length\n", + mbox_msg->len, xfer->rx_len); + ti_sci_dump_header_dbg(dev, hdr); + return; + } + + ti_sci_dump_header_dbg(dev, hdr); + /* Take a copy to the rx buffer.. */ + memcpy(xfer->xfer_buf, mbox_msg->buf, xfer->rx_len); + complete(&xfer->done); +} + +/** + * ti_sci_get_one_xfer() - Allocate one message + * @info: Pointer to SCI entity information + * @msg_type: Message type + * @msg_flags: Flag to set for the message + * @tx_message_size: transmit message size + * @rx_message_size: receive message size + * + * Helper function which is used by various command functions that are + * exposed to clients of this driver for allocating a message traffic event. + * + * This function can sleep depending on pending requests already in the system + * for the SCI entity. Further, this also holds a spinlock to maintain integrity + * of internal data structures. + * + * Return: 0 if all went fine, else corresponding error. + */ +static struct ti_sci_xfer *ti_sci_get_one_xfer(struct ti_sci_info *info, + u16 msg_type, u32 msg_flags, + size_t tx_message_size, + size_t rx_message_size) +{ + struct ti_sci_xfers_info *minfo = &info->minfo; + struct ti_sci_xfer *xfer; + struct ti_sci_msg_hdr *hdr; + unsigned long flags; + unsigned long bit_pos; + u8 xfer_id; + int ret; + int timeout; + + /* Ensure we have sane transfer sizes */ + if (rx_message_size > info->desc->max_msg_size || + tx_message_size > info->desc->max_msg_size || + rx_message_size < sizeof(*hdr) || tx_message_size < sizeof(*hdr)) + return ERR_PTR(-ERANGE); + + /* + * Ensure we have only controlled number of pending messages. + * Ideally, we might just have to wait a single message, be + * conservative and wait 5 times that.. + */ + timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms) * 5; + ret = down_timeout(&minfo->sem_xfer_count, timeout); + if (ret < 0) + return ERR_PTR(ret); + + /* Keep the locked section as small as possible */ + spin_lock_irqsave(&minfo->xfer_lock, flags); + bit_pos = find_first_zero_bit(minfo->xfer_alloc_table, + info->desc->max_msgs); + set_bit(bit_pos, minfo->xfer_alloc_table); + spin_unlock_irqrestore(&minfo->xfer_lock, flags); + + /* + * We already ensured in probe that we can have max messages that can + * fit in hdr.seq - NOTE: this improves access latencies + * to predictable O(1) access, BUT, it opens us to risk if + * remote misbehaves with corrupted message sequence responses. + * If that happens, we are going to be messed up anyways.. + */ + xfer_id = (u8)bit_pos; + + xfer = &minfo->xfer_block[xfer_id]; + + hdr = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + xfer->tx_message.len = tx_message_size; + xfer->rx_len = (u8)rx_message_size; + + reinit_completion(&xfer->done); + + hdr->seq = xfer_id; + hdr->type = msg_type; + hdr->host = info->desc->host_id; + hdr->flags = msg_flags; + + return xfer; +} + +/** + * ti_sci_put_one_xfer() - Release a message + * @minfo: transfer info pointer + * @xfer: message that was reserved by ti_sci_get_one_xfer + * + * This holds a spinlock to maintain integrity of internal data structures. + */ +static void ti_sci_put_one_xfer(struct ti_sci_xfers_info *minfo, + struct ti_sci_xfer *xfer) +{ + unsigned long flags; + struct ti_sci_msg_hdr *hdr; + u8 xfer_id; + + hdr = (struct ti_sci_msg_hdr *)xfer->tx_message.buf; + xfer_id = hdr->seq; + + /* + * Keep the locked section as small as possible + * NOTE: we might escape with smp_mb and no lock here.. + * but just be conservative and symmetric. + */ + spin_lock_irqsave(&minfo->xfer_lock, flags); + clear_bit(xfer_id, minfo->xfer_alloc_table); + spin_unlock_irqrestore(&minfo->xfer_lock, flags); + + /* Increment the count for the next user to get through */ + up(&minfo->sem_xfer_count); +} + +/** + * ti_sci_do_xfer() - Do one transfer + * @info: Pointer to SCI entity information + * @xfer: Transfer to initiate and wait for response + * + * Return: -ETIMEDOUT in case of no response, if transmit error, + * return corresponding error, else if all goes well, + * return 0. + */ +static inline int ti_sci_do_xfer(struct ti_sci_info *info, + struct ti_sci_xfer *xfer) +{ + int ret; + int timeout; + struct device *dev = info->dev; + + ret = mbox_send_message(info->chan_tx, &xfer->tx_message); + if (ret < 0) + return ret; + + ret = 0; + + /* And we wait for the response. */ + timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms); + if (!wait_for_completion_timeout(&xfer->done, timeout)) { + dev_err(dev, "Mbox timedout in resp(caller: %pF)\n", + (void *)_RET_IP_); + ret = -ETIMEDOUT; + } + /* + * NOTE: we might prefer not to need the mailbox ticker to manage the + * transfer queueing since the protocol layer queues things by itself. + * Unfortunately, we have to kick the mailbox framework after we have + * received our message. + */ + mbox_client_txdone(info->chan_tx, ret); + + return ret; +} + +/** + * ti_sci_cmd_get_revision() - command to get the revision of the SCI entity + * @info: Pointer to SCI entity information + * + * Updates the SCI information in the internal data structure. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_get_revision(struct ti_sci_info *info) +{ + struct device *dev = info->dev; + struct ti_sci_handle *handle = &info->handle; + struct ti_sci_version_info *ver = &handle->version; + struct ti_sci_msg_resp_version *rev_info; + struct ti_sci_xfer *xfer; + int ret; + + /* No need to setup flags since it is expected to respond */ + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_VERSION, + 0x0, sizeof(struct ti_sci_msg_hdr), + sizeof(*rev_info)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + + rev_info = (struct ti_sci_msg_resp_version *)xfer->xfer_buf; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + ver->abi_major = rev_info->abi_major; + ver->abi_minor = rev_info->abi_minor; + ver->firmware_revision = rev_info->firmware_revision; + strncpy(ver->firmware_description, rev_info->firmware_description, + sizeof(ver->firmware_description)); + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + return ret; +} + +/** + * ti_sci_is_response_ack() - Generic ACK/NACK message checkup + * @r: pointer to response buffer + * + * Return: true if the response was an ACK, else returns false. + */ +static inline bool ti_sci_is_response_ack(void *r) +{ + struct ti_sci_msg_hdr *hdr = r; + + return hdr->flags & TI_SCI_FLAG_RESP_GENERIC_ACK ? true : false; +} + +/** + * ti_sci_set_device_state() - Set device state helper + * @handle: pointer to TI SCI handle + * @id: Device identifier + * @flags: flags to setup for the device + * @state: State to move the device to + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_set_device_state(const struct ti_sci_handle *handle, + u32 id, u32 flags, u8 state) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_set_device_state *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_DEVICE_STATE, + flags | TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_set_device_state *)xfer->xfer_buf; + req->id = id; + req->state = state; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_get_device_state() - Get device state helper + * @handle: Handle to the device + * @id: Device Identifier + * @clcnt: Pointer to Context Loss Count + * @resets: pointer to resets + * @p_state: pointer to p_state + * @c_state: pointer to c_state + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_get_device_state(const struct ti_sci_handle *handle, + u32 id, u32 *clcnt, u32 *resets, + u8 *p_state, u8 *c_state) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_get_device_state *req; + struct ti_sci_msg_resp_get_device_state *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + if (!clcnt && !resets && !p_state && !c_state) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + /* Response is expected, so need of any flags */ + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_DEVICE_STATE, + 0, sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_get_device_state *)xfer->xfer_buf; + req->id = id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_resp_get_device_state *)xfer->xfer_buf; + if (!ti_sci_is_response_ack(resp)) { + ret = -ENODEV; + goto fail; + } + + if (clcnt) + *clcnt = resp->context_loss_count; + if (resets) + *resets = resp->resets; + if (p_state) + *p_state = resp->programmed_state; + if (c_state) + *c_state = resp->current_state; +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_get_device() - command to request for device managed by TISCI + * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * @id: Device Identifier + * + * Request for the device - NOTE: the client MUST maintain integrity of + * usage count by balancing get_device with put_device. No refcounting is + * managed by driver for that purpose. + * + * NOTE: The request is for exclusive access for the processor. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_get_device(const struct ti_sci_handle *handle, u32 id) +{ + return ti_sci_set_device_state(handle, id, + MSG_FLAG_DEVICE_EXCLUSIVE, + MSG_DEVICE_SW_STATE_ON); +} + +/** + * ti_sci_cmd_idle_device() - Command to idle a device managed by TISCI + * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * @id: Device Identifier + * + * Request for the device - NOTE: the client MUST maintain integrity of + * usage count by balancing get_device with put_device. No refcounting is + * managed by driver for that purpose. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_idle_device(const struct ti_sci_handle *handle, u32 id) +{ + return ti_sci_set_device_state(handle, id, + MSG_FLAG_DEVICE_EXCLUSIVE, + MSG_DEVICE_SW_STATE_RETENTION); +} + +/** + * ti_sci_cmd_put_device() - command to release a device managed by TISCI + * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * @id: Device Identifier + * + * Request for the device - NOTE: the client MUST maintain integrity of + * usage count by balancing get_device with put_device. No refcounting is + * managed by driver for that purpose. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_put_device(const struct ti_sci_handle *handle, u32 id) +{ + return ti_sci_set_device_state(handle, id, + 0, MSG_DEVICE_SW_STATE_AUTO_OFF); +} + +/** + * ti_sci_cmd_dev_is_valid() - Is the device valid + * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * @id: Device Identifier + * + * Return: 0 if all went fine and the device ID is valid, else return + * appropriate error. + */ +static int ti_sci_cmd_dev_is_valid(const struct ti_sci_handle *handle, u32 id) +{ + u8 unused; + + /* check the device state which will also tell us if the ID is valid */ + return ti_sci_get_device_state(handle, id, NULL, NULL, NULL, &unused); +} + +/** + * ti_sci_cmd_dev_get_clcnt() - Get context loss counter + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @count: Pointer to Context Loss counter to populate + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_dev_get_clcnt(const struct ti_sci_handle *handle, u32 id, + u32 *count) +{ + return ti_sci_get_device_state(handle, id, count, NULL, NULL, NULL); +} + +/** + * ti_sci_cmd_dev_is_idle() - Check if the device is requested to be idle + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @r_state: true if requested to be idle + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_dev_is_idle(const struct ti_sci_handle *handle, u32 id, + bool *r_state) +{ + int ret; + u8 state; + + if (!r_state) + return -EINVAL; + + ret = ti_sci_get_device_state(handle, id, NULL, NULL, &state, NULL); + if (ret) + return ret; + + *r_state = (state == MSG_DEVICE_SW_STATE_RETENTION); + + return 0; +} + +/** + * ti_sci_cmd_dev_is_stop() - Check if the device is requested to be stopped + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @r_state: true if requested to be stopped + * @curr_state: true if currently stopped. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_dev_is_stop(const struct ti_sci_handle *handle, u32 id, + bool *r_state, bool *curr_state) +{ + int ret; + u8 p_state, c_state; + + if (!r_state && !curr_state) + return -EINVAL; + + ret = + ti_sci_get_device_state(handle, id, NULL, NULL, &p_state, &c_state); + if (ret) + return ret; + + if (r_state) + *r_state = (p_state == MSG_DEVICE_SW_STATE_AUTO_OFF); + if (curr_state) + *curr_state = (c_state == MSG_DEVICE_HW_STATE_OFF); + + return 0; +} + +/** + * ti_sci_cmd_dev_is_on() - Check if the device is requested to be ON + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @r_state: true if requested to be ON + * @curr_state: true if currently ON and active + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_dev_is_on(const struct ti_sci_handle *handle, u32 id, + bool *r_state, bool *curr_state) +{ + int ret; + u8 p_state, c_state; + + if (!r_state && !curr_state) + return -EINVAL; + + ret = + ti_sci_get_device_state(handle, id, NULL, NULL, &p_state, &c_state); + if (ret) + return ret; + + if (r_state) + *r_state = (p_state == MSG_DEVICE_SW_STATE_ON); + if (curr_state) + *curr_state = (c_state == MSG_DEVICE_HW_STATE_ON); + + return 0; +} + +/** + * ti_sci_cmd_dev_is_trans() - Check if the device is currently transitioning + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @curr_state: true if currently transitioning. + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_dev_is_trans(const struct ti_sci_handle *handle, u32 id, + bool *curr_state) +{ + int ret; + u8 state; + + if (!curr_state) + return -EINVAL; + + ret = ti_sci_get_device_state(handle, id, NULL, NULL, NULL, &state); + if (ret) + return ret; + + *curr_state = (state == MSG_DEVICE_HW_STATE_TRANS); + + return 0; +} + +/** + * ti_sci_cmd_set_device_resets() - command to set resets for device managed + * by TISCI + * @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * @id: Device Identifier + * @reset_state: Device specific reset bit field + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_set_device_resets(const struct ti_sci_handle *handle, + u32 id, u32 reset_state) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_set_device_resets *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_DEVICE_RESETS, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_set_device_resets *)xfer->xfer_buf; + req->id = id; + req->resets = reset_state; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_get_device_resets() - Get reset state for device managed + * by TISCI + * @handle: Pointer to TISCI handle + * @id: Device Identifier + * @reset_state: Pointer to reset state to populate + * + * Return: 0 if all went fine, else return appropriate error. + */ +static int ti_sci_cmd_get_device_resets(const struct ti_sci_handle *handle, + u32 id, u32 *reset_state) +{ + return ti_sci_get_device_state(handle, id, NULL, reset_state, NULL, + NULL); +} + +/** + * ti_sci_set_clock_state() - Set clock state helper + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @flags: Header flags as needed + * @state: State to request for the clock. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_set_clock_state(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, + u32 flags, u8 state) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_set_clock_state *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_CLOCK_STATE, + flags | TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_set_clock_state *)xfer->xfer_buf; + req->dev_id = dev_id; + req->clk_id = clk_id; + req->request_state = state; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_get_clock_state() - Get clock state helper + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @programmed_state: State requested for clock to move to + * @current_state: State that the clock is currently in + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_get_clock_state(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, + u8 *programmed_state, u8 *current_state) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_get_clock_state *req; + struct ti_sci_msg_resp_get_clock_state *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + if (!programmed_state && !current_state) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_CLOCK_STATE, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_get_clock_state *)xfer->xfer_buf; + req->dev_id = dev_id; + req->clk_id = clk_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_resp_get_clock_state *)xfer->xfer_buf; + + if (!ti_sci_is_response_ack(resp)) { + ret = -ENODEV; + goto fail; + } + + if (programmed_state) + *programmed_state = resp->programmed_state; + if (current_state) + *current_state = resp->current_state; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_get_clock() - Get control of a clock from TI SCI + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @needs_ssc: 'true' if Spread Spectrum clock is desired, else 'false' + * @can_change_freq: 'true' if frequency change is desired, else 'false' + * @enable_input_term: 'true' if input termination is desired, else 'false' + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_get_clock(const struct ti_sci_handle *handle, u32 dev_id, + u8 clk_id, bool needs_ssc, bool can_change_freq, + bool enable_input_term) +{ + u32 flags = 0; + + flags |= needs_ssc ? MSG_FLAG_CLOCK_ALLOW_SSC : 0; + flags |= can_change_freq ? MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE : 0; + flags |= enable_input_term ? MSG_FLAG_CLOCK_INPUT_TERM : 0; + + return ti_sci_set_clock_state(handle, dev_id, clk_id, flags, + MSG_CLOCK_SW_STATE_REQ); +} + +/** + * ti_sci_cmd_idle_clock() - Idle a clock which is in our control + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * + * NOTE: This clock must have been requested by get_clock previously. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_idle_clock(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id) +{ + return ti_sci_set_clock_state(handle, dev_id, clk_id, 0, + MSG_CLOCK_SW_STATE_UNREQ); +} + +/** + * ti_sci_cmd_put_clock() - Release a clock from our control back to TISCI + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * + * NOTE: This clock must have been requested by get_clock previously. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_put_clock(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id) +{ + return ti_sci_set_clock_state(handle, dev_id, clk_id, 0, + MSG_CLOCK_SW_STATE_AUTO); +} + +/** + * ti_sci_cmd_clk_is_auto() - Is the clock being auto managed + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @req_state: state indicating if the clock is auto managed + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_is_auto(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, bool *req_state) +{ + u8 state = 0; + int ret; + + if (!req_state) + return -EINVAL; + + ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, &state, NULL); + if (ret) + return ret; + + *req_state = (state == MSG_CLOCK_SW_STATE_AUTO); + return 0; +} + +/** + * ti_sci_cmd_clk_is_on() - Is the clock ON + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @req_state: state indicating if the clock is managed by us and enabled + * @curr_state: state indicating if the clock is ready for operation + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_is_on(const struct ti_sci_handle *handle, u32 dev_id, + u8 clk_id, bool *req_state, bool *curr_state) +{ + u8 c_state = 0, r_state = 0; + int ret; + + if (!req_state && !curr_state) + return -EINVAL; + + ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, + &r_state, &c_state); + if (ret) + return ret; + + if (req_state) + *req_state = (r_state == MSG_CLOCK_SW_STATE_REQ); + if (curr_state) + *curr_state = (c_state == MSG_CLOCK_HW_STATE_READY); + return 0; +} + +/** + * ti_sci_cmd_clk_is_off() - Is the clock OFF + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @req_state: state indicating if the clock is managed by us and disabled + * @curr_state: state indicating if the clock is NOT ready for operation + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_is_off(const struct ti_sci_handle *handle, u32 dev_id, + u8 clk_id, bool *req_state, bool *curr_state) +{ + u8 c_state = 0, r_state = 0; + int ret; + + if (!req_state && !curr_state) + return -EINVAL; + + ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, + &r_state, &c_state); + if (ret) + return ret; + + if (req_state) + *req_state = (r_state == MSG_CLOCK_SW_STATE_UNREQ); + if (curr_state) + *curr_state = (c_state == MSG_CLOCK_HW_STATE_NOT_READY); + return 0; +} + +/** + * ti_sci_cmd_clk_set_parent() - Set the clock source of a specific device clock + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @parent_id: Parent clock identifier to set + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_set_parent(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, u8 parent_id) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_set_clock_parent *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_CLOCK_PARENT, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_set_clock_parent *)xfer->xfer_buf; + req->dev_id = dev_id; + req->clk_id = clk_id; + req->parent_id = parent_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_clk_get_parent() - Get current parent clock source + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @parent_id: Current clock parent + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_get_parent(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, u8 *parent_id) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_get_clock_parent *req; + struct ti_sci_msg_resp_get_clock_parent *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle || !parent_id) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_CLOCK_PARENT, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_get_clock_parent *)xfer->xfer_buf; + req->dev_id = dev_id; + req->clk_id = clk_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_resp_get_clock_parent *)xfer->xfer_buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + else + *parent_id = resp->parent_id; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_clk_get_num_parents() - Get num parents of the current clk source + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @num_parents: Returns he number of parents to the current clock. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_get_num_parents(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, + u8 *num_parents) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_get_clock_num_parents *req; + struct ti_sci_msg_resp_get_clock_num_parents *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle || !num_parents) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_get_clock_num_parents *)xfer->xfer_buf; + req->dev_id = dev_id; + req->clk_id = clk_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_resp_get_clock_num_parents *)xfer->xfer_buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + else + *num_parents = resp->num_parents; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_clk_get_match_freq() - Find a good match for frequency + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @min_freq: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @target_freq: The target clock frequency in Hz. A frequency will be + * processed as close to this target frequency as possible. + * @max_freq: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @match_freq: Frequency match in Hz response. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_get_match_freq(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, u64 min_freq, + u64 target_freq, u64 max_freq, + u64 *match_freq) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_query_clock_freq *req; + struct ti_sci_msg_resp_query_clock_freq *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle || !match_freq) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_QUERY_CLOCK_FREQ, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_query_clock_freq *)xfer->xfer_buf; + req->dev_id = dev_id; + req->clk_id = clk_id; + req->min_freq_hz = min_freq; + req->target_freq_hz = target_freq; + req->max_freq_hz = max_freq; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_resp_query_clock_freq *)xfer->xfer_buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + else + *match_freq = resp->freq_hz; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_clk_set_freq() - Set a frequency for clock + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @min_freq: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @target_freq: The target clock frequency in Hz. A frequency will be + * processed as close to this target frequency as possible. + * @max_freq: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_set_freq(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, u64 min_freq, + u64 target_freq, u64 max_freq) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_set_clock_freq *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_CLOCK_FREQ, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_set_clock_freq *)xfer->xfer_buf; + req->dev_id = dev_id; + req->clk_id = clk_id; + req->min_freq_hz = min_freq; + req->target_freq_hz = target_freq; + req->max_freq_hz = max_freq; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf; + + ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/** + * ti_sci_cmd_clk_get_freq() - Get current frequency + * @handle: pointer to TI SCI handle + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @freq: Currently frequency in Hz + * + * Return: 0 if all went well, else returns appropriate error value. + */ +static int ti_sci_cmd_clk_get_freq(const struct ti_sci_handle *handle, + u32 dev_id, u8 clk_id, u64 *freq) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_get_clock_freq *req; + struct ti_sci_msg_resp_get_clock_freq *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle || !freq) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_CLOCK_FREQ, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_get_clock_freq *)xfer->xfer_buf; + req->dev_id = dev_id; + req->clk_id = clk_id; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_resp_get_clock_freq *)xfer->xfer_buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + else + *freq = resp->freq_hz; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +static int ti_sci_cmd_core_reboot(const struct ti_sci_handle *handle) +{ + struct ti_sci_info *info; + struct ti_sci_msg_req_reboot *req; + struct ti_sci_msg_hdr *resp; + struct ti_sci_xfer *xfer; + struct device *dev; + int ret = 0; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + dev = info->dev; + + xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SYS_RESET, + TI_SCI_FLAG_REQ_ACK_ON_PROCESSED, + sizeof(*req), sizeof(*resp)); + if (IS_ERR(xfer)) { + ret = PTR_ERR(xfer); + dev_err(dev, "Message alloc failed(%d)\n", ret); + return ret; + } + req = (struct ti_sci_msg_req_reboot *)xfer->xfer_buf; + + ret = ti_sci_do_xfer(info, xfer); + if (ret) { + dev_err(dev, "Mbox send fail %d\n", ret); + goto fail; + } + + resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf; + + if (!ti_sci_is_response_ack(resp)) + ret = -ENODEV; + else + ret = 0; + +fail: + ti_sci_put_one_xfer(&info->minfo, xfer); + + return ret; +} + +/* + * ti_sci_setup_ops() - Setup the operations structures + * @info: pointer to TISCI pointer + */ +static void ti_sci_setup_ops(struct ti_sci_info *info) +{ + struct ti_sci_ops *ops = &info->handle.ops; + struct ti_sci_core_ops *core_ops = &ops->core_ops; + struct ti_sci_dev_ops *dops = &ops->dev_ops; + struct ti_sci_clk_ops *cops = &ops->clk_ops; + + core_ops->reboot_device = ti_sci_cmd_core_reboot; + + dops->get_device = ti_sci_cmd_get_device; + dops->idle_device = ti_sci_cmd_idle_device; + dops->put_device = ti_sci_cmd_put_device; + + dops->is_valid = ti_sci_cmd_dev_is_valid; + dops->get_context_loss_count = ti_sci_cmd_dev_get_clcnt; + dops->is_idle = ti_sci_cmd_dev_is_idle; + dops->is_stop = ti_sci_cmd_dev_is_stop; + dops->is_on = ti_sci_cmd_dev_is_on; + dops->is_transitioning = ti_sci_cmd_dev_is_trans; + dops->set_device_resets = ti_sci_cmd_set_device_resets; + dops->get_device_resets = ti_sci_cmd_get_device_resets; + + cops->get_clock = ti_sci_cmd_get_clock; + cops->idle_clock = ti_sci_cmd_idle_clock; + cops->put_clock = ti_sci_cmd_put_clock; + cops->is_auto = ti_sci_cmd_clk_is_auto; + cops->is_on = ti_sci_cmd_clk_is_on; + cops->is_off = ti_sci_cmd_clk_is_off; + + cops->set_parent = ti_sci_cmd_clk_set_parent; + cops->get_parent = ti_sci_cmd_clk_get_parent; + cops->get_num_parents = ti_sci_cmd_clk_get_num_parents; + + cops->get_best_match_freq = ti_sci_cmd_clk_get_match_freq; + cops->set_freq = ti_sci_cmd_clk_set_freq; + cops->get_freq = ti_sci_cmd_clk_get_freq; +} + +/** + * ti_sci_get_handle() - Get the TI SCI handle for a device + * @dev: Pointer to device for which we want SCI handle + * + * NOTE: The function does not track individual clients of the framework + * and is expected to be maintained by caller of TI SCI protocol library. + * ti_sci_put_handle must be balanced with successful ti_sci_get_handle + * Return: pointer to handle if successful, else: + * -EPROBE_DEFER if the instance is not ready + * -ENODEV if the required node handler is missing + * -EINVAL if invalid conditions are encountered. + */ +const struct ti_sci_handle *ti_sci_get_handle(struct device *dev) +{ + struct device_node *ti_sci_np; + struct list_head *p; + struct ti_sci_handle *handle = NULL; + struct ti_sci_info *info; + + if (!dev) { + pr_err("I need a device pointer\n"); + return ERR_PTR(-EINVAL); + } + ti_sci_np = of_get_parent(dev->of_node); + if (!ti_sci_np) { + dev_err(dev, "No OF information\n"); + return ERR_PTR(-EINVAL); + } + + mutex_lock(&ti_sci_list_mutex); + list_for_each(p, &ti_sci_list) { + info = list_entry(p, struct ti_sci_info, node); + if (ti_sci_np == info->dev->of_node) { + handle = &info->handle; + info->users++; + break; + } + } + mutex_unlock(&ti_sci_list_mutex); + of_node_put(ti_sci_np); + + if (!handle) + return ERR_PTR(-EPROBE_DEFER); + + return handle; +} +EXPORT_SYMBOL_GPL(ti_sci_get_handle); + +/** + * ti_sci_put_handle() - Release the handle acquired by ti_sci_get_handle + * @handle: Handle acquired by ti_sci_get_handle + * + * NOTE: The function does not track individual clients of the framework + * and is expected to be maintained by caller of TI SCI protocol library. + * ti_sci_put_handle must be balanced with successful ti_sci_get_handle + * + * Return: 0 is successfully released + * if an error pointer was passed, it returns the error value back, + * if null was passed, it returns -EINVAL; + */ +int ti_sci_put_handle(const struct ti_sci_handle *handle) +{ + struct ti_sci_info *info; + + if (IS_ERR(handle)) + return PTR_ERR(handle); + if (!handle) + return -EINVAL; + + info = handle_to_ti_sci_info(handle); + mutex_lock(&ti_sci_list_mutex); + if (!WARN_ON(!info->users)) + info->users--; + mutex_unlock(&ti_sci_list_mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(ti_sci_put_handle); + +static void devm_ti_sci_release(struct device *dev, void *res) +{ + const struct ti_sci_handle **ptr = res; + const struct ti_sci_handle *handle = *ptr; + int ret; + + ret = ti_sci_put_handle(handle); + if (ret) + dev_err(dev, "failed to put handle %d\n", ret); +} + +/** + * devm_ti_sci_get_handle() - Managed get handle + * @dev: device for which we want SCI handle for. + * + * NOTE: This releases the handle once the device resources are + * no longer needed. MUST NOT BE released with ti_sci_put_handle. + * The function does not track individual clients of the framework + * and is expected to be maintained by caller of TI SCI protocol library. + * + * Return: 0 if all went fine, else corresponding error. + */ +const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev) +{ + const struct ti_sci_handle **ptr; + const struct ti_sci_handle *handle; + + ptr = devres_alloc(devm_ti_sci_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + handle = ti_sci_get_handle(dev); + + if (!IS_ERR(handle)) { + *ptr = handle; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return handle; +} +EXPORT_SYMBOL_GPL(devm_ti_sci_get_handle); + +static int tisci_reboot_handler(struct notifier_block *nb, unsigned long mode, + void *cmd) +{ + struct ti_sci_info *info = reboot_to_ti_sci_info(nb); + const struct ti_sci_handle *handle = &info->handle; + + ti_sci_cmd_core_reboot(handle); + + /* call fail OR pass, we should not be here in the first place */ + return NOTIFY_BAD; +} + +/* Description for K2G */ +static const struct ti_sci_desc ti_sci_pmmc_k2g_desc = { + .host_id = 2, + /* Conservative duration */ + .max_rx_timeout_ms = 1000, + /* Limited by MBOX_TX_QUEUE_LEN. K2G can handle upto 128 messages! */ + .max_msgs = 20, + .max_msg_size = 64, +}; + +static const struct of_device_id ti_sci_of_match[] = { + {.compatible = "ti,k2g-sci", .data = &ti_sci_pmmc_k2g_desc}, + { /* Sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, ti_sci_of_match); + +static int ti_sci_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *of_id; + const struct ti_sci_desc *desc; + struct ti_sci_xfer *xfer; + struct ti_sci_info *info = NULL; + struct ti_sci_xfers_info *minfo; + struct mbox_client *cl; + int ret = -EINVAL; + int i; + int reboot = 0; + + of_id = of_match_device(ti_sci_of_match, dev); + if (!of_id) { + dev_err(dev, "OF data missing\n"); + return -EINVAL; + } + desc = of_id->data; + + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->dev = dev; + info->desc = desc; + reboot = of_property_read_bool(dev->of_node, + "ti,system-reboot-controller"); + INIT_LIST_HEAD(&info->node); + minfo = &info->minfo; + + /* + * Pre-allocate messages + * NEVER allocate more than what we can indicate in hdr.seq + * if we have data description bug, force a fix.. + */ + if (WARN_ON(desc->max_msgs >= + 1 << 8 * sizeof(((struct ti_sci_msg_hdr *)0)->seq))) + return -EINVAL; + + minfo->xfer_block = devm_kcalloc(dev, + desc->max_msgs, + sizeof(*minfo->xfer_block), + GFP_KERNEL); + if (!minfo->xfer_block) + return -ENOMEM; + + minfo->xfer_alloc_table = devm_kzalloc(dev, + BITS_TO_LONGS(desc->max_msgs) + * sizeof(unsigned long), + GFP_KERNEL); + if (!minfo->xfer_alloc_table) + return -ENOMEM; + bitmap_zero(minfo->xfer_alloc_table, desc->max_msgs); + + /* Pre-initialize the buffer pointer to pre-allocated buffers */ + for (i = 0, xfer = minfo->xfer_block; i < desc->max_msgs; i++, xfer++) { + xfer->xfer_buf = devm_kcalloc(dev, 1, desc->max_msg_size, + GFP_KERNEL); + if (!xfer->xfer_buf) + return -ENOMEM; + + xfer->tx_message.buf = xfer->xfer_buf; + init_completion(&xfer->done); + } + + ret = ti_sci_debugfs_create(pdev, info); + if (ret) + dev_warn(dev, "Failed to create debug file\n"); + + platform_set_drvdata(pdev, info); + + cl = &info->cl; + cl->dev = dev; + cl->tx_block = false; + cl->rx_callback = ti_sci_rx_callback; + cl->knows_txdone = true; + + spin_lock_init(&minfo->xfer_lock); + sema_init(&minfo->sem_xfer_count, desc->max_msgs); + + info->chan_rx = mbox_request_channel_byname(cl, "rx"); + if (IS_ERR(info->chan_rx)) { + ret = PTR_ERR(info->chan_rx); + goto out; + } + + info->chan_tx = mbox_request_channel_byname(cl, "tx"); + if (IS_ERR(info->chan_tx)) { + ret = PTR_ERR(info->chan_tx); + goto out; + } + ret = ti_sci_cmd_get_revision(info); + if (ret) { + dev_err(dev, "Unable to communicate with TISCI(%d)\n", ret); + goto out; + } + + ti_sci_setup_ops(info); + + if (reboot) { + info->nb.notifier_call = tisci_reboot_handler; + info->nb.priority = 128; + + ret = register_restart_handler(&info->nb); + if (ret) { + dev_err(dev, "reboot registration fail(%d)\n", ret); + return ret; + } + } + + dev_info(dev, "ABI: %d.%d (firmware rev 0x%04x '%s')\n", + info->handle.version.abi_major, info->handle.version.abi_minor, + info->handle.version.firmware_revision, + info->handle.version.firmware_description); + + mutex_lock(&ti_sci_list_mutex); + list_add_tail(&info->node, &ti_sci_list); + mutex_unlock(&ti_sci_list_mutex); + + return of_platform_populate(dev->of_node, NULL, NULL, dev); +out: + if (!IS_ERR(info->chan_tx)) + mbox_free_channel(info->chan_tx); + if (!IS_ERR(info->chan_rx)) + mbox_free_channel(info->chan_rx); + debugfs_remove(info->d); + return ret; +} + +static int ti_sci_remove(struct platform_device *pdev) +{ + struct ti_sci_info *info; + struct device *dev = &pdev->dev; + int ret = 0; + + of_platform_depopulate(dev); + + info = platform_get_drvdata(pdev); + + if (info->nb.notifier_call) + unregister_restart_handler(&info->nb); + + mutex_lock(&ti_sci_list_mutex); + if (info->users) + ret = -EBUSY; + else + list_del(&info->node); + mutex_unlock(&ti_sci_list_mutex); + + if (!ret) { + ti_sci_debugfs_destroy(pdev, info); + + /* Safe to free channels since no more users */ + mbox_free_channel(info->chan_tx); + mbox_free_channel(info->chan_rx); + } + + return ret; +} + +static struct platform_driver ti_sci_driver = { + .probe = ti_sci_probe, + .remove = ti_sci_remove, + .driver = { + .name = "ti-sci", + .of_match_table = of_match_ptr(ti_sci_of_match), + }, +}; +module_platform_driver(ti_sci_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("TI System Control Interface(SCI) driver"); +MODULE_AUTHOR("Nishanth Menon"); +MODULE_ALIAS("platform:ti-sci"); diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h new file mode 100644 index 0000000..9b611e9 --- /dev/null +++ b/drivers/firmware/ti_sci.h @@ -0,0 +1,492 @@ +/* + * Texas Instruments System Control Interface (TISCI) Protocol + * + * Communication protocol with TI SCI hardware + * The system works in a message response protocol + * See: http://processors.wiki.ti.com/index.php/TISCI for details + * + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the + * distribution. + * + * Neither the name of Texas Instruments Incorporated nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef __TI_SCI_H +#define __TI_SCI_H + +/* Generic Messages */ +#define TI_SCI_MSG_ENABLE_WDT 0x0000 +#define TI_SCI_MSG_WAKE_RESET 0x0001 +#define TI_SCI_MSG_VERSION 0x0002 +#define TI_SCI_MSG_WAKE_REASON 0x0003 +#define TI_SCI_MSG_GOODBYE 0x0004 +#define TI_SCI_MSG_SYS_RESET 0x0005 + +/* Device requests */ +#define TI_SCI_MSG_SET_DEVICE_STATE 0x0200 +#define TI_SCI_MSG_GET_DEVICE_STATE 0x0201 +#define TI_SCI_MSG_SET_DEVICE_RESETS 0x0202 + +/* Clock requests */ +#define TI_SCI_MSG_SET_CLOCK_STATE 0x0100 +#define TI_SCI_MSG_GET_CLOCK_STATE 0x0101 +#define TI_SCI_MSG_SET_CLOCK_PARENT 0x0102 +#define TI_SCI_MSG_GET_CLOCK_PARENT 0x0103 +#define TI_SCI_MSG_GET_NUM_CLOCK_PARENTS 0x0104 +#define TI_SCI_MSG_SET_CLOCK_FREQ 0x010c +#define TI_SCI_MSG_QUERY_CLOCK_FREQ 0x010d +#define TI_SCI_MSG_GET_CLOCK_FREQ 0x010e + +/** + * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses + * @type: Type of messages: One of TI_SCI_MSG* values + * @host: Host of the message + * @seq: Message identifier indicating a transfer sequence + * @flags: Flag for the message + */ +struct ti_sci_msg_hdr { + u16 type; + u8 host; + u8 seq; +#define TI_SCI_MSG_FLAG(val) (1 << (val)) +#define TI_SCI_FLAG_REQ_GENERIC_NORESPONSE 0x0 +#define TI_SCI_FLAG_REQ_ACK_ON_RECEIVED TI_SCI_MSG_FLAG(0) +#define TI_SCI_FLAG_REQ_ACK_ON_PROCESSED TI_SCI_MSG_FLAG(1) +#define TI_SCI_FLAG_RESP_GENERIC_NACK 0x0 +#define TI_SCI_FLAG_RESP_GENERIC_ACK TI_SCI_MSG_FLAG(1) + /* Additional Flags */ + u32 flags; +} __packed; + +/** + * struct ti_sci_msg_resp_version - Response for a message + * @hdr: Generic header + * @firmware_description: String describing the firmware + * @firmware_revision: Firmware revision + * @abi_major: Major version of the ABI that firmware supports + * @abi_minor: Minor version of the ABI that firmware supports + * + * In general, ABI version changes follow the rule that minor version increments + * are backward compatible. Major revision changes in ABI may not be + * backward compatible. + * + * Response to a generic message with message type TI_SCI_MSG_VERSION + */ +struct ti_sci_msg_resp_version { + struct ti_sci_msg_hdr hdr; + char firmware_description[32]; + u16 firmware_revision; + u8 abi_major; + u8 abi_minor; +} __packed; + +/** + * struct ti_sci_msg_req_reboot - Reboot the SoC + * @hdr: Generic Header + * + * Request type is TI_SCI_MSG_SYS_RESET, responded with a generic + * ACK/NACK message. + */ +struct ti_sci_msg_req_reboot { + struct ti_sci_msg_hdr hdr; +} __packed; + +/** + * struct ti_sci_msg_req_set_device_state - Set the desired state of the device + * @hdr: Generic header + * @id: Indicates which device to modify + * @reserved: Reserved space in message, must be 0 for backward compatibility + * @state: The desired state of the device. + * + * Certain flags can also be set to alter the device state: + * + MSG_FLAG_DEVICE_WAKE_ENABLED - Configure the device to be a wake source. + * The meaning of this flag will vary slightly from device to device and from + * SoC to SoC but it generally allows the device to wake the SoC out of deep + * suspend states. + * + MSG_FLAG_DEVICE_RESET_ISO - Enable reset isolation for this device. + * + MSG_FLAG_DEVICE_EXCLUSIVE - Claim this device exclusively. When passed + * with STATE_RETENTION or STATE_ON, it will claim the device exclusively. + * If another host already has this device set to STATE_RETENTION or STATE_ON, + * the message will fail. Once successful, other hosts attempting to set + * STATE_RETENTION or STATE_ON will fail. + * + * Request type is TI_SCI_MSG_SET_DEVICE_STATE, responded with a generic + * ACK/NACK message. + */ +struct ti_sci_msg_req_set_device_state { + /* Additional hdr->flags options */ +#define MSG_FLAG_DEVICE_WAKE_ENABLED TI_SCI_MSG_FLAG(8) +#define MSG_FLAG_DEVICE_RESET_ISO TI_SCI_MSG_FLAG(9) +#define MSG_FLAG_DEVICE_EXCLUSIVE TI_SCI_MSG_FLAG(10) + struct ti_sci_msg_hdr hdr; + u32 id; + u32 reserved; + +#define MSG_DEVICE_SW_STATE_AUTO_OFF 0 +#define MSG_DEVICE_SW_STATE_RETENTION 1 +#define MSG_DEVICE_SW_STATE_ON 2 + u8 state; +} __packed; + +/** + * struct ti_sci_msg_req_get_device_state - Request to get device. + * @hdr: Generic header + * @id: Device Identifier + * + * Request type is TI_SCI_MSG_GET_DEVICE_STATE, responded device state + * information + */ +struct ti_sci_msg_req_get_device_state { + struct ti_sci_msg_hdr hdr; + u32 id; +} __packed; + +/** + * struct ti_sci_msg_resp_get_device_state - Response to get device request. + * @hdr: Generic header + * @context_loss_count: Indicates how many times the device has lost context. A + * driver can use this monotonic counter to determine if the device has + * lost context since the last time this message was exchanged. + * @resets: Programmed state of the reset lines. + * @programmed_state: The state as programmed by set_device. + * - Uses the MSG_DEVICE_SW_* macros + * @current_state: The actual state of the hardware. + * + * Response to request TI_SCI_MSG_GET_DEVICE_STATE. + */ +struct ti_sci_msg_resp_get_device_state { + struct ti_sci_msg_hdr hdr; + u32 context_loss_count; + u32 resets; + u8 programmed_state; +#define MSG_DEVICE_HW_STATE_OFF 0 +#define MSG_DEVICE_HW_STATE_ON 1 +#define MSG_DEVICE_HW_STATE_TRANS 2 + u8 current_state; +} __packed; + +/** + * struct ti_sci_msg_req_set_device_resets - Set the desired resets + * configuration of the device + * @hdr: Generic header + * @id: Indicates which device to modify + * @resets: A bit field of resets for the device. The meaning, behavior, + * and usage of the reset flags are device specific. 0 for a bit + * indicates releasing the reset represented by that bit while 1 + * indicates keeping it held. + * + * Request type is TI_SCI_MSG_SET_DEVICE_RESETS, responded with a generic + * ACK/NACK message. + */ +struct ti_sci_msg_req_set_device_resets { + struct ti_sci_msg_hdr hdr; + u32 id; + u32 resets; +} __packed; + +/** + * struct ti_sci_msg_req_set_clock_state - Request to setup a Clock state + * @hdr: Generic Header, Certain flags can be set specific to the clocks: + * MSG_FLAG_CLOCK_ALLOW_SSC: Allow this clock to be modified + * via spread spectrum clocking. + * MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE: Allow this clock's + * frequency to be changed while it is running so long as it + * is within the min/max limits. + * MSG_FLAG_CLOCK_INPUT_TERM: Enable input termination, this + * is only applicable to clock inputs on the SoC pseudo-device. + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @request_state: Request the state for the clock to be set to. + * MSG_CLOCK_SW_STATE_UNREQ: The IP does not require this clock, + * it can be disabled, regardless of the state of the device + * MSG_CLOCK_SW_STATE_AUTO: Allow the System Controller to + * automatically manage the state of this clock. If the device + * is enabled, then the clock is enabled. If the device is set + * to off or retention, then the clock is internally set as not + * being required by the device.(default) + * MSG_CLOCK_SW_STATE_REQ: Configure the clock to be enabled, + * regardless of the state of the device. + * + * Normally, all required clocks are managed by TISCI entity, this is used + * only for specific control *IF* required. Auto managed state is + * MSG_CLOCK_SW_STATE_AUTO, in other states, TISCI entity assume remote + * will explicitly control. + * + * Request type is TI_SCI_MSG_SET_CLOCK_STATE, response is a generic + * ACK or NACK message. + */ +struct ti_sci_msg_req_set_clock_state { + /* Additional hdr->flags options */ +#define MSG_FLAG_CLOCK_ALLOW_SSC TI_SCI_MSG_FLAG(8) +#define MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE TI_SCI_MSG_FLAG(9) +#define MSG_FLAG_CLOCK_INPUT_TERM TI_SCI_MSG_FLAG(10) + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; +#define MSG_CLOCK_SW_STATE_UNREQ 0 +#define MSG_CLOCK_SW_STATE_AUTO 1 +#define MSG_CLOCK_SW_STATE_REQ 2 + u8 request_state; +} __packed; + +/** + * struct ti_sci_msg_req_get_clock_state - Request for clock state + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to get state of. + * + * Request type is TI_SCI_MSG_GET_CLOCK_STATE, response is state + * of the clock + */ +struct ti_sci_msg_req_get_clock_state { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; +} __packed; + +/** + * struct ti_sci_msg_resp_get_clock_state - Response to get clock state + * @hdr: Generic Header + * @programmed_state: Any programmed state of the clock. This is one of + * MSG_CLOCK_SW_STATE* values. + * @current_state: Current state of the clock. This is one of: + * MSG_CLOCK_HW_STATE_NOT_READY: Clock is not ready + * MSG_CLOCK_HW_STATE_READY: Clock is ready + * + * Response to TI_SCI_MSG_GET_CLOCK_STATE. + */ +struct ti_sci_msg_resp_get_clock_state { + struct ti_sci_msg_hdr hdr; + u8 programmed_state; +#define MSG_CLOCK_HW_STATE_NOT_READY 0 +#define MSG_CLOCK_HW_STATE_READY 1 + u8 current_state; +} __packed; + +/** + * struct ti_sci_msg_req_set_clock_parent - Set the clock parent + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * @parent_id: The new clock parent is selectable by an index via this + * parameter. + * + * Request type is TI_SCI_MSG_SET_CLOCK_PARENT, response is generic + * ACK / NACK message. + */ +struct ti_sci_msg_req_set_clock_parent { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; + u8 parent_id; +} __packed; + +/** + * struct ti_sci_msg_req_get_clock_parent - Get the clock parent + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to get the parent for. + * + * Request type is TI_SCI_MSG_GET_CLOCK_PARENT, response is parent information + */ +struct ti_sci_msg_req_get_clock_parent { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; +} __packed; + +/** + * struct ti_sci_msg_resp_get_clock_parent - Response with clock parent + * @hdr: Generic Header + * @parent_id: The current clock parent + * + * Response to TI_SCI_MSG_GET_CLOCK_PARENT. + */ +struct ti_sci_msg_resp_get_clock_parent { + struct ti_sci_msg_hdr hdr; + u8 parent_id; +} __packed; + +/** + * struct ti_sci_msg_req_get_clock_num_parents - Request to get clock parents + * @hdr: Generic header + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * + * This request provides information about how many clock parent options + * are available for a given clock to a device. This is typically used + * for input clocks. + * + * Request type is TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, response is appropriate + * message, or NACK in case of inability to satisfy request. + */ +struct ti_sci_msg_req_get_clock_num_parents { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; +} __packed; + +/** + * struct ti_sci_msg_resp_get_clock_num_parents - Response for get clk parents + * @hdr: Generic header + * @num_parents: Number of clock parents + * + * Response to TI_SCI_MSG_GET_NUM_CLOCK_PARENTS + */ +struct ti_sci_msg_resp_get_clock_num_parents { + struct ti_sci_msg_hdr hdr; + u8 num_parents; +} __packed; + +/** + * struct ti_sci_msg_req_query_clock_freq - Request to query a frequency + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @target_freq_hz: The target clock frequency. A frequency will be found + * as close to this target frequency as possible. + * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @clk_id: Clock identifier for the device for this request. + * + * NOTE: Normally clock frequency management is automatically done by TISCI + * entity. In case of specific requests, TISCI evaluates capability to achieve + * requested frequency within provided range and responds with + * result message. + * + * Request type is TI_SCI_MSG_QUERY_CLOCK_FREQ, response is appropriate message, + * or NACK in case of inability to satisfy request. + */ +struct ti_sci_msg_req_query_clock_freq { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u64 min_freq_hz; + u64 target_freq_hz; + u64 max_freq_hz; + u8 clk_id; +} __packed; + +/** + * struct ti_sci_msg_resp_query_clock_freq - Response to a clock frequency query + * @hdr: Generic Header + * @freq_hz: Frequency that is the best match in Hz. + * + * Response to request type TI_SCI_MSG_QUERY_CLOCK_FREQ. NOTE: if the request + * cannot be satisfied, the message will be of type NACK. + */ +struct ti_sci_msg_resp_query_clock_freq { + struct ti_sci_msg_hdr hdr; + u64 freq_hz; +} __packed; + +/** + * struct ti_sci_msg_req_set_clock_freq - Request to setup a clock frequency + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @target_freq_hz: The target clock frequency. The clock will be programmed + * at a rate as close to this target frequency as possible. + * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * @clk_id: Clock identifier for the device for this request. + * + * NOTE: Normally clock frequency management is automatically done by TISCI + * entity. In case of specific requests, TISCI evaluates capability to achieve + * requested range and responds with success/failure message. + * + * This sets the desired frequency for a clock within an allowable + * range. This message will fail on an enabled clock unless + * MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE is set for the clock. Additionally, + * if other clocks have their frequency modified due to this message, + * they also must have the MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE or be disabled. + * + * Calling set frequency on a clock input to the SoC pseudo-device will + * inform the PMMC of that clock's frequency. Setting a frequency of + * zero will indicate the clock is disabled. + * + * Calling set frequency on clock outputs from the SoC pseudo-device will + * function similarly to setting the clock frequency on a device. + * + * Request type is TI_SCI_MSG_SET_CLOCK_FREQ, response is a generic ACK/NACK + * message. + */ +struct ti_sci_msg_req_set_clock_freq { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u64 min_freq_hz; + u64 target_freq_hz; + u64 max_freq_hz; + u8 clk_id; +} __packed; + +/** + * struct ti_sci_msg_req_get_clock_freq - Request to get the clock frequency + * @hdr: Generic Header + * @dev_id: Device identifier this request is for + * @clk_id: Clock identifier for the device for this request. + * + * NOTE: Normally clock frequency management is automatically done by TISCI + * entity. In some cases, clock frequencies are configured by host. + * + * Request type is TI_SCI_MSG_GET_CLOCK_FREQ, responded with clock frequency + * that the clock is currently at. + */ +struct ti_sci_msg_req_get_clock_freq { + struct ti_sci_msg_hdr hdr; + u32 dev_id; + u8 clk_id; +} __packed; + +/** + * struct ti_sci_msg_resp_get_clock_freq - Response of clock frequency request + * @hdr: Generic Header + * @freq_hz: Frequency that the clock is currently on, in Hz. + * + * Response to request type TI_SCI_MSG_GET_CLOCK_FREQ. + */ +struct ti_sci_msg_resp_get_clock_freq { + struct ti_sci_msg_hdr hdr; + u64 freq_hz; +} __packed; + +#endif /* __TI_SCI_H */ diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig index 11eebfe..ceff415 100644 --- a/drivers/mailbox/Kconfig +++ b/drivers/mailbox/Kconfig @@ -124,6 +124,15 @@ config MAILBOX_TEST Test client to help with testing new Controller driver implementations. +config TEGRA_HSP_MBOX + bool "Tegra HSP (Hardware Synchronization Primitives) Driver" + depends on ARCH_TEGRA_186_SOC + help + The Tegra HSP driver is used for the interprocessor communication + between different remote processors and host processors on Tegra186 + and later SoCs. Say Y here if you want to have this support. + If unsure say N. + config XGENE_SLIMPRO_MBOX tristate "APM SoC X-Gene SLIMpro Mailbox Controller" depends on ARCH_XGENE diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile index ace6fed..7dde4f6 100644 --- a/drivers/mailbox/Makefile +++ b/drivers/mailbox/Makefile @@ -29,3 +29,5 @@ obj-$(CONFIG_XGENE_SLIMPRO_MBOX) += mailbox-xgene-slimpro.o obj-$(CONFIG_HI6220_MBOX) += hi6220-mailbox.o obj-$(CONFIG_BCM_PDC_MBOX) += bcm-pdc-mailbox.o + +obj-$(CONFIG_TEGRA_HSP_MBOX) += tegra-hsp.o diff --git a/drivers/mailbox/tegra-hsp.c b/drivers/mailbox/tegra-hsp.c new file mode 100644 index 0000000..0cde356 --- /dev/null +++ b/drivers/mailbox/tegra-hsp.c @@ -0,0 +1,479 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/mailbox_controller.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <dt-bindings/mailbox/tegra186-hsp.h> + +#define HSP_INT_DIMENSIONING 0x380 +#define HSP_nSM_SHIFT 0 +#define HSP_nSS_SHIFT 4 +#define HSP_nAS_SHIFT 8 +#define HSP_nDB_SHIFT 12 +#define HSP_nSI_SHIFT 16 +#define HSP_nINT_MASK 0xf + +#define HSP_DB_TRIGGER 0x0 +#define HSP_DB_ENABLE 0x4 +#define HSP_DB_RAW 0x8 +#define HSP_DB_PENDING 0xc + +#define HSP_DB_CCPLEX 1 +#define HSP_DB_BPMP 3 +#define HSP_DB_MAX 7 + +struct tegra_hsp_channel; +struct tegra_hsp; + +struct tegra_hsp_channel { + struct tegra_hsp *hsp; + struct mbox_chan *chan; + void __iomem *regs; +}; + +struct tegra_hsp_doorbell { + struct tegra_hsp_channel channel; + struct list_head list; + const char *name; + unsigned int master; + unsigned int index; +}; + +struct tegra_hsp_db_map { + const char *name; + unsigned int master; + unsigned int index; +}; + +struct tegra_hsp_soc { + const struct tegra_hsp_db_map *map; +}; + +struct tegra_hsp { + const struct tegra_hsp_soc *soc; + struct mbox_controller mbox; + void __iomem *regs; + unsigned int irq; + unsigned int num_sm; + unsigned int num_as; + unsigned int num_ss; + unsigned int num_db; + unsigned int num_si; + spinlock_t lock; + + struct list_head doorbells; +}; + +static inline struct tegra_hsp * +to_tegra_hsp(struct mbox_controller *mbox) +{ + return container_of(mbox, struct tegra_hsp, mbox); +} + +static inline u32 tegra_hsp_readl(struct tegra_hsp *hsp, unsigned int offset) +{ + return readl(hsp->regs + offset); +} + +static inline void tegra_hsp_writel(struct tegra_hsp *hsp, u32 value, + unsigned int offset) +{ + writel(value, hsp->regs + offset); +} + +static inline u32 tegra_hsp_channel_readl(struct tegra_hsp_channel *channel, + unsigned int offset) +{ + return readl(channel->regs + offset); +} + +static inline void tegra_hsp_channel_writel(struct tegra_hsp_channel *channel, + u32 value, unsigned int offset) +{ + writel(value, channel->regs + offset); +} + +static bool tegra_hsp_doorbell_can_ring(struct tegra_hsp_doorbell *db) +{ + u32 value; + + value = tegra_hsp_channel_readl(&db->channel, HSP_DB_ENABLE); + + return (value & BIT(TEGRA_HSP_DB_MASTER_CCPLEX)) != 0; +} + +static struct tegra_hsp_doorbell * +__tegra_hsp_doorbell_get(struct tegra_hsp *hsp, unsigned int master) +{ + struct tegra_hsp_doorbell *entry; + + list_for_each_entry(entry, &hsp->doorbells, list) + if (entry->master == master) + return entry; + + return NULL; +} + +static struct tegra_hsp_doorbell * +tegra_hsp_doorbell_get(struct tegra_hsp *hsp, unsigned int master) +{ + struct tegra_hsp_doorbell *db; + unsigned long flags; + + spin_lock_irqsave(&hsp->lock, flags); + db = __tegra_hsp_doorbell_get(hsp, master); + spin_unlock_irqrestore(&hsp->lock, flags); + + return db; +} + +static irqreturn_t tegra_hsp_doorbell_irq(int irq, void *data) +{ + struct tegra_hsp *hsp = data; + struct tegra_hsp_doorbell *db; + unsigned long master, value; + + db = tegra_hsp_doorbell_get(hsp, TEGRA_HSP_DB_MASTER_CCPLEX); + if (!db) + return IRQ_NONE; + + value = tegra_hsp_channel_readl(&db->channel, HSP_DB_PENDING); + tegra_hsp_channel_writel(&db->channel, value, HSP_DB_PENDING); + + spin_lock(&hsp->lock); + + for_each_set_bit(master, &value, hsp->mbox.num_chans) { + struct tegra_hsp_doorbell *db; + + db = __tegra_hsp_doorbell_get(hsp, master); + /* + * Depending on the bootloader chain, the CCPLEX doorbell will + * have some doorbells enabled, which means that requesting an + * interrupt will immediately fire. + * + * In that case, db->channel.chan will still be NULL here and + * cause a crash if not properly guarded. + * + * It remains to be seen if ignoring the doorbell in that case + * is the correct solution. + */ + if (db && db->channel.chan) + mbox_chan_received_data(db->channel.chan, NULL); + } + + spin_unlock(&hsp->lock); + + return IRQ_HANDLED; +} + +static struct tegra_hsp_channel * +tegra_hsp_doorbell_create(struct tegra_hsp *hsp, const char *name, + unsigned int master, unsigned int index) +{ + struct tegra_hsp_doorbell *db; + unsigned int offset; + unsigned long flags; + + db = kzalloc(sizeof(*db), GFP_KERNEL); + if (!db) + return ERR_PTR(-ENOMEM); + + offset = (1 + (hsp->num_sm / 2) + hsp->num_ss + hsp->num_as) << 16; + offset += index * 0x100; + + db->channel.regs = hsp->regs + offset; + db->channel.hsp = hsp; + + db->name = kstrdup_const(name, GFP_KERNEL); + db->master = master; + db->index = index; + + spin_lock_irqsave(&hsp->lock, flags); + list_add_tail(&db->list, &hsp->doorbells); + spin_unlock_irqrestore(&hsp->lock, flags); + + return &db->channel; +} + +static void __tegra_hsp_doorbell_destroy(struct tegra_hsp_doorbell *db) +{ + list_del(&db->list); + kfree_const(db->name); + kfree(db); +} + +static int tegra_hsp_doorbell_send_data(struct mbox_chan *chan, void *data) +{ + struct tegra_hsp_doorbell *db = chan->con_priv; + + tegra_hsp_channel_writel(&db->channel, 1, HSP_DB_TRIGGER); + + return 0; +} + +static int tegra_hsp_doorbell_startup(struct mbox_chan *chan) +{ + struct tegra_hsp_doorbell *db = chan->con_priv; + struct tegra_hsp *hsp = db->channel.hsp; + struct tegra_hsp_doorbell *ccplex; + unsigned long flags; + u32 value; + + if (db->master >= hsp->mbox.num_chans) { + dev_err(hsp->mbox.dev, + "invalid master ID %u for HSP channel\n", + db->master); + return -EINVAL; + } + + ccplex = tegra_hsp_doorbell_get(hsp, TEGRA_HSP_DB_MASTER_CCPLEX); + if (!ccplex) + return -ENODEV; + + if (!tegra_hsp_doorbell_can_ring(db)) + return -ENODEV; + + spin_lock_irqsave(&hsp->lock, flags); + + value = tegra_hsp_channel_readl(&ccplex->channel, HSP_DB_ENABLE); + value |= BIT(db->master); + tegra_hsp_channel_writel(&ccplex->channel, value, HSP_DB_ENABLE); + + spin_unlock_irqrestore(&hsp->lock, flags); + + return 0; +} + +static void tegra_hsp_doorbell_shutdown(struct mbox_chan *chan) +{ + struct tegra_hsp_doorbell *db = chan->con_priv; + struct tegra_hsp *hsp = db->channel.hsp; + struct tegra_hsp_doorbell *ccplex; + unsigned long flags; + u32 value; + + ccplex = tegra_hsp_doorbell_get(hsp, TEGRA_HSP_DB_MASTER_CCPLEX); + if (!ccplex) + return; + + spin_lock_irqsave(&hsp->lock, flags); + + value = tegra_hsp_channel_readl(&ccplex->channel, HSP_DB_ENABLE); + value &= ~BIT(db->master); + tegra_hsp_channel_writel(&ccplex->channel, value, HSP_DB_ENABLE); + + spin_unlock_irqrestore(&hsp->lock, flags); +} + +static const struct mbox_chan_ops tegra_hsp_doorbell_ops = { + .send_data = tegra_hsp_doorbell_send_data, + .startup = tegra_hsp_doorbell_startup, + .shutdown = tegra_hsp_doorbell_shutdown, +}; + +static struct mbox_chan *of_tegra_hsp_xlate(struct mbox_controller *mbox, + const struct of_phandle_args *args) +{ + struct tegra_hsp_channel *channel = ERR_PTR(-ENODEV); + struct tegra_hsp *hsp = to_tegra_hsp(mbox); + unsigned int type = args->args[0]; + unsigned int master = args->args[1]; + struct tegra_hsp_doorbell *db; + struct mbox_chan *chan; + unsigned long flags; + unsigned int i; + + switch (type) { + case TEGRA_HSP_MBOX_TYPE_DB: + db = tegra_hsp_doorbell_get(hsp, master); + if (db) + channel = &db->channel; + + break; + + default: + break; + } + + if (IS_ERR(channel)) + return ERR_CAST(channel); + + spin_lock_irqsave(&hsp->lock, flags); + + for (i = 0; i < hsp->mbox.num_chans; i++) { + chan = &hsp->mbox.chans[i]; + if (!chan->con_priv) { + chan->con_priv = channel; + channel->chan = chan; + break; + } + + chan = NULL; + } + + spin_unlock_irqrestore(&hsp->lock, flags); + + return chan ?: ERR_PTR(-EBUSY); +} + +static void tegra_hsp_remove_doorbells(struct tegra_hsp *hsp) +{ + struct tegra_hsp_doorbell *db, *tmp; + unsigned long flags; + + spin_lock_irqsave(&hsp->lock, flags); + + list_for_each_entry_safe(db, tmp, &hsp->doorbells, list) + __tegra_hsp_doorbell_destroy(db); + + spin_unlock_irqrestore(&hsp->lock, flags); +} + +static int tegra_hsp_add_doorbells(struct tegra_hsp *hsp) +{ + const struct tegra_hsp_db_map *map = hsp->soc->map; + struct tegra_hsp_channel *channel; + + while (map->name) { + channel = tegra_hsp_doorbell_create(hsp, map->name, + map->master, map->index); + if (IS_ERR(channel)) { + tegra_hsp_remove_doorbells(hsp); + return PTR_ERR(channel); + } + + map++; + } + + return 0; +} + +static int tegra_hsp_probe(struct platform_device *pdev) +{ + struct tegra_hsp *hsp; + struct resource *res; + u32 value; + int err; + + hsp = devm_kzalloc(&pdev->dev, sizeof(*hsp), GFP_KERNEL); + if (!hsp) + return -ENOMEM; + + hsp->soc = of_device_get_match_data(&pdev->dev); + INIT_LIST_HEAD(&hsp->doorbells); + spin_lock_init(&hsp->lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hsp->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hsp->regs)) + return PTR_ERR(hsp->regs); + + value = tegra_hsp_readl(hsp, HSP_INT_DIMENSIONING); + hsp->num_sm = (value >> HSP_nSM_SHIFT) & HSP_nINT_MASK; + hsp->num_ss = (value >> HSP_nSS_SHIFT) & HSP_nINT_MASK; + hsp->num_as = (value >> HSP_nAS_SHIFT) & HSP_nINT_MASK; + hsp->num_db = (value >> HSP_nDB_SHIFT) & HSP_nINT_MASK; + hsp->num_si = (value >> HSP_nSI_SHIFT) & HSP_nINT_MASK; + + err = platform_get_irq_byname(pdev, "doorbell"); + if (err < 0) { + dev_err(&pdev->dev, "failed to get doorbell IRQ: %d\n", err); + return err; + } + + hsp->irq = err; + + hsp->mbox.of_xlate = of_tegra_hsp_xlate; + hsp->mbox.num_chans = 32; + hsp->mbox.dev = &pdev->dev; + hsp->mbox.txdone_irq = false; + hsp->mbox.txdone_poll = false; + hsp->mbox.ops = &tegra_hsp_doorbell_ops; + + hsp->mbox.chans = devm_kcalloc(&pdev->dev, hsp->mbox.num_chans, + sizeof(*hsp->mbox.chans), + GFP_KERNEL); + if (!hsp->mbox.chans) + return -ENOMEM; + + err = tegra_hsp_add_doorbells(hsp); + if (err < 0) { + dev_err(&pdev->dev, "failed to add doorbells: %d\n", err); + return err; + } + + platform_set_drvdata(pdev, hsp); + + err = mbox_controller_register(&hsp->mbox); + if (err) { + dev_err(&pdev->dev, "failed to register mailbox: %d\n", err); + tegra_hsp_remove_doorbells(hsp); + return err; + } + + err = devm_request_irq(&pdev->dev, hsp->irq, tegra_hsp_doorbell_irq, + IRQF_NO_SUSPEND, dev_name(&pdev->dev), hsp); + if (err < 0) { + dev_err(&pdev->dev, "failed to request IRQ#%u: %d\n", + hsp->irq, err); + return err; + } + + return 0; +} + +static int tegra_hsp_remove(struct platform_device *pdev) +{ + struct tegra_hsp *hsp = platform_get_drvdata(pdev); + + mbox_controller_unregister(&hsp->mbox); + tegra_hsp_remove_doorbells(hsp); + + return 0; +} + +static const struct tegra_hsp_db_map tegra186_hsp_db_map[] = { + { "ccplex", TEGRA_HSP_DB_MASTER_CCPLEX, HSP_DB_CCPLEX, }, + { "bpmp", TEGRA_HSP_DB_MASTER_BPMP, HSP_DB_BPMP, }, + { /* sentinel */ } +}; + +static const struct tegra_hsp_soc tegra186_hsp_soc = { + .map = tegra186_hsp_db_map, +}; + +static const struct of_device_id tegra_hsp_match[] = { + { .compatible = "nvidia,tegra186-hsp", .data = &tegra186_hsp_soc }, + { } +}; + +static struct platform_driver tegra_hsp_driver = { + .driver = { + .name = "tegra-hsp", + .of_match_table = tegra_hsp_match, + }, + .probe = tegra_hsp_probe, + .remove = tegra_hsp_remove, +}; + +static int __init tegra_hsp_init(void) +{ + return platform_driver_register(&tegra_hsp_driver); +} +core_initcall(tegra_hsp_init); diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig index 4b4c0c3..ec80e35 100644 --- a/drivers/memory/Kconfig +++ b/drivers/memory/Kconfig @@ -134,6 +134,14 @@ config MTK_SMI mainly help enable/disable iommu and control the power domain and clocks for each local arbiter. +config DA8XX_DDRCTL + bool "Texas Instruments da8xx DDR2/mDDR driver" + depends on ARCH_DAVINCI_DA8XX + help + This driver is for the DDR2/mDDR Memory Controller present on + Texas Instruments da8xx SoCs. It's used to tweak various memory + controller configuration options. + source "drivers/memory/samsung/Kconfig" source "drivers/memory/tegra/Kconfig" diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile index b20ae38..e88097fb 100644 --- a/drivers/memory/Makefile +++ b/drivers/memory/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o obj-$(CONFIG_JZ4780_NEMC) += jz4780-nemc.o obj-$(CONFIG_MTK_SMI) += mtk-smi.o +obj-$(CONFIG_DA8XX_DDRCTL) += da8xx-ddrctl.o obj-$(CONFIG_SAMSUNG_MC) += samsung/ obj-$(CONFIG_TEGRA_MC) += tegra/ diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c index b5ed3bd..047d6fc 100644 --- a/drivers/memory/atmel-ebi.c +++ b/drivers/memory/atmel-ebi.c @@ -657,7 +657,7 @@ static int at91_ebi_dev_disable(struct at91_ebi *ebi, struct device_node *np) return -ENOMEM; newprop->value = devm_kstrdup(dev, "disabled", GFP_KERNEL); - if (!newprop->name) + if (!newprop->value) return -ENOMEM; newprop->length = sizeof("disabled"); diff --git a/drivers/memory/atmel-sdramc.c b/drivers/memory/atmel-sdramc.c index 12080b0..b418b39 100644 --- a/drivers/memory/atmel-sdramc.c +++ b/drivers/memory/atmel-sdramc.c @@ -85,8 +85,4 @@ static struct platform_driver atmel_ramc_driver = { }, }; -static int __init atmel_ramc_init(void) -{ - return platform_driver_register(&atmel_ramc_driver); -} -device_initcall(atmel_ramc_init); +builtin_platform_driver(atmel_ramc_driver); diff --git a/drivers/memory/da8xx-ddrctl.c b/drivers/memory/da8xx-ddrctl.c new file mode 100644 index 0000000..030afbe --- /dev/null +++ b/drivers/memory/da8xx-ddrctl.c @@ -0,0 +1,173 @@ +/* + * TI da8xx DDR2/mDDR controller driver + * + * Copyright (C) 2016 BayLibre SAS + * + * Author: + * Bartosz Golaszewski <bgolaszewski@baylibre.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +/* + * REVISIT: Linux doesn't have a good framework for the kind of performance + * knobs this driver controls. We can't use device tree properties as it deals + * with hardware configuration rather than description. We also don't want to + * commit to maintaining some random sysfs attributes. + * + * For now we just hardcode the register values for the boards that need + * some changes (as is the case for the LCD controller on da850-lcdk - the + * first board we support here). When linux gets an appropriate framework, + * we'll easily convert the driver to it. + */ + +struct da8xx_ddrctl_config_knob { + const char *name; + u32 reg; + u32 mask; + u32 shift; +}; + +static const struct da8xx_ddrctl_config_knob da8xx_ddrctl_knobs[] = { + { + .name = "da850-pbbpr", + .reg = 0x20, + .mask = 0xffffff00, + .shift = 0, + }, +}; + +struct da8xx_ddrctl_setting { + const char *name; + u32 val; +}; + +struct da8xx_ddrctl_board_settings { + const char *board; + const struct da8xx_ddrctl_setting *settings; +}; + +static const struct da8xx_ddrctl_setting da850_lcdk_ddrctl_settings[] = { + { + .name = "da850-pbbpr", + .val = 0x20, + }, + { } +}; + +static const struct da8xx_ddrctl_board_settings da8xx_ddrctl_board_confs[] = { + { + .board = "ti,da850-lcdk", + .settings = da850_lcdk_ddrctl_settings, + }, +}; + +static const struct da8xx_ddrctl_config_knob * +da8xx_ddrctl_match_knob(const struct da8xx_ddrctl_setting *setting) +{ + const struct da8xx_ddrctl_config_knob *knob; + int i; + + for (i = 0; i < ARRAY_SIZE(da8xx_ddrctl_knobs); i++) { + knob = &da8xx_ddrctl_knobs[i]; + + if (strcmp(knob->name, setting->name) == 0) + return knob; + } + + return NULL; +} + +static const struct da8xx_ddrctl_setting *da8xx_ddrctl_get_board_settings(void) +{ + const struct da8xx_ddrctl_board_settings *board_settings; + int i; + + for (i = 0; i < ARRAY_SIZE(da8xx_ddrctl_board_confs); i++) { + board_settings = &da8xx_ddrctl_board_confs[i]; + + if (of_machine_is_compatible(board_settings->board)) + return board_settings->settings; + } + + return NULL; +} + +static int da8xx_ddrctl_probe(struct platform_device *pdev) +{ + const struct da8xx_ddrctl_config_knob *knob; + const struct da8xx_ddrctl_setting *setting; + struct device_node *node; + struct resource *res; + void __iomem *ddrctl; + struct device *dev; + u32 reg; + + dev = &pdev->dev; + node = dev->of_node; + + setting = da8xx_ddrctl_get_board_settings(); + if (!setting) { + dev_err(dev, "no settings defined for this board\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ddrctl = devm_ioremap_resource(dev, res); + if (IS_ERR(ddrctl)) { + dev_err(dev, "unable to map memory controller registers\n"); + return PTR_ERR(ddrctl); + } + + for (; setting->name; setting++) { + knob = da8xx_ddrctl_match_knob(setting); + if (!knob) { + dev_warn(dev, + "no such config option: %s\n", setting->name); + continue; + } + + if (knob->reg + sizeof(u32) > resource_size(res)) { + dev_warn(dev, + "register offset of '%s' exceeds mapped memory size\n", + knob->name); + continue; + } + + reg = readl(ddrctl + knob->reg); + reg &= knob->mask; + reg |= setting->val << knob->shift; + + dev_dbg(dev, "writing 0x%08x to %s\n", reg, setting->name); + + writel(reg, ddrctl + knob->reg); + } + + return 0; +} + +static const struct of_device_id da8xx_ddrctl_of_match[] = { + { .compatible = "ti,da850-ddr-controller", }, + { }, +}; + +static struct platform_driver da8xx_ddrctl_driver = { + .probe = da8xx_ddrctl_probe, + .driver = { + .name = "da850-ddr-controller", + .of_match_table = da8xx_ddrctl_of_match, + }, +}; +module_platform_driver(da8xx_ddrctl_driver); + +MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>"); +MODULE_DESCRIPTION("TI da8xx DDR2/mDDR controller driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c index f84b53d..b33ab8c 100644 --- a/drivers/misc/sram.c +++ b/drivers/misc/sram.c @@ -19,12 +19,17 @@ */ #include <linux/clk.h> +#include <linux/delay.h> #include <linux/genalloc.h> #include <linux/io.h> #include <linux/list_sort.h> #include <linux/of_address.h> +#include <linux/of_device.h> #include <linux/platform_device.h> +#include <linux/regmap.h> #include <linux/slab.h> +#include <linux/mfd/syscon.h> +#include <soc/at91/atmel-secumod.h> #define SRAM_GRANULARITY 32 @@ -334,12 +339,33 @@ static int sram_reserve_regions(struct sram_dev *sram, struct resource *res) return ret; } +static int atmel_securam_wait(void) +{ + struct regmap *regmap; + u32 val; + + regmap = syscon_regmap_lookup_by_compatible("atmel,sama5d2-secumod"); + if (IS_ERR(regmap)) + return -ENODEV; + + return regmap_read_poll_timeout(regmap, AT91_SECUMOD_RAMRDY, val, + val & AT91_SECUMOD_RAMRDY_READY, + 10000, 500000); +} + +static const struct of_device_id sram_dt_ids[] = { + { .compatible = "mmio-sram" }, + { .compatible = "atmel,sama5d2-securam", .data = atmel_securam_wait }, + {} +}; + static int sram_probe(struct platform_device *pdev) { struct sram_dev *sram; struct resource *res; size_t size; int ret; + int (*init_func)(void); sram = devm_kzalloc(&pdev->dev, sizeof(*sram), GFP_KERNEL); if (!sram) @@ -384,6 +410,13 @@ static int sram_probe(struct platform_device *pdev) platform_set_drvdata(pdev, sram); + init_func = of_device_get_match_data(&pdev->dev); + if (init_func) { + ret = init_func(); + if (ret) + return ret; + } + dev_dbg(sram->dev, "SRAM pool: %zu KiB @ 0x%p\n", gen_pool_size(sram->pool) / 1024, sram->virt_base); @@ -405,17 +438,10 @@ static int sram_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_OF -static const struct of_device_id sram_dt_ids[] = { - { .compatible = "mmio-sram" }, - {} -}; -#endif - static struct platform_driver sram_driver = { .driver = { .name = "sram", - .of_match_table = of_match_ptr(sram_dt_ids), + .of_match_table = sram_dt_ids, }, .probe = sram_probe, .remove = sram_remove, diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 06d9fa2..172dc96 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -94,5 +94,6 @@ config RESET_ZYNQ source "drivers/reset/sti/Kconfig" source "drivers/reset/hisilicon/Kconfig" +source "drivers/reset/tegra/Kconfig" endif diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index bbe7026..13b346e 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -1,6 +1,7 @@ obj-y += core.o obj-y += hisilicon/ obj-$(CONFIG_ARCH_STI) += sti/ +obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_RESET_ATH79) += reset-ath79.o obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o diff --git a/drivers/reset/core.c b/drivers/reset/core.c index b8ae1db..10368ed 100644 --- a/drivers/reset/core.c +++ b/drivers/reset/core.c @@ -32,6 +32,9 @@ static LIST_HEAD(reset_controller_list); * @refcnt: Number of gets of this reset_control * @shared: Is this a shared (1), or an exclusive (0) reset_control? * @deassert_cnt: Number of times this reset line has been deasserted + * @triggered_count: Number of times this reset line has been reset. Currently + * only used for shared resets, which means that the value + * will be either 0 or 1. */ struct reset_control { struct reset_controller_dev *rcdev; @@ -40,6 +43,7 @@ struct reset_control { unsigned int refcnt; int shared; atomic_t deassert_count; + atomic_t triggered_count; }; /** @@ -134,18 +138,35 @@ EXPORT_SYMBOL_GPL(devm_reset_controller_register); * reset_control_reset - reset the controlled device * @rstc: reset controller * - * Calling this on a shared reset controller is an error. + * On a shared reset line the actual reset pulse is only triggered once for the + * lifetime of the reset_control instance: for all but the first caller this is + * a no-op. + * Consumers must not use reset_control_(de)assert on shared reset lines when + * reset_control_reset has been used. */ int reset_control_reset(struct reset_control *rstc) { - if (WARN_ON(IS_ERR_OR_NULL(rstc)) || - WARN_ON(rstc->shared)) + int ret; + + if (WARN_ON(IS_ERR_OR_NULL(rstc))) return -EINVAL; - if (rstc->rcdev->ops->reset) - return rstc->rcdev->ops->reset(rstc->rcdev, rstc->id); + if (!rstc->rcdev->ops->reset) + return -ENOTSUPP; - return -ENOTSUPP; + if (rstc->shared) { + if (WARN_ON(atomic_read(&rstc->deassert_count) != 0)) + return -EINVAL; + + if (atomic_inc_return(&rstc->triggered_count) != 1) + return 0; + } + + ret = rstc->rcdev->ops->reset(rstc->rcdev, rstc->id); + if (rstc->shared && !ret) + atomic_dec(&rstc->triggered_count); + + return ret; } EXPORT_SYMBOL_GPL(reset_control_reset); @@ -159,6 +180,8 @@ EXPORT_SYMBOL_GPL(reset_control_reset); * * For shared reset controls a driver cannot expect the hw's registers and * internal state to be reset, but must be prepared for this to happen. + * Consumers must not use reset_control_reset on shared reset lines when + * reset_control_(de)assert has been used. */ int reset_control_assert(struct reset_control *rstc) { @@ -169,6 +192,9 @@ int reset_control_assert(struct reset_control *rstc) return -ENOTSUPP; if (rstc->shared) { + if (WARN_ON(atomic_read(&rstc->triggered_count) != 0)) + return -EINVAL; + if (WARN_ON(atomic_read(&rstc->deassert_count) == 0)) return -EINVAL; @@ -185,6 +211,8 @@ EXPORT_SYMBOL_GPL(reset_control_assert); * @rstc: reset controller * * After calling this function, the reset is guaranteed to be deasserted. + * Consumers must not use reset_control_reset on shared reset lines when + * reset_control_(de)assert has been used. */ int reset_control_deassert(struct reset_control *rstc) { @@ -195,6 +223,9 @@ int reset_control_deassert(struct reset_control *rstc) return -ENOTSUPP; if (rstc->shared) { + if (WARN_ON(atomic_read(&rstc->triggered_count) != 0)) + return -EINVAL; + if (atomic_inc_return(&rstc->deassert_count) != 1) return 0; } diff --git a/drivers/reset/reset-berlin.c b/drivers/reset/reset-berlin.c index 369f391..371197b 100644 --- a/drivers/reset/reset-berlin.c +++ b/drivers/reset/reset-berlin.c @@ -1,6 +1,8 @@ /* * Copyright (C) 2014 Marvell Technology Group Ltd. * + * Marvell Berlin reset driver + * * Antoine Tenart <antoine.tenart@free-electrons.com> * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> * @@ -12,7 +14,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/mfd/syscon.h> -#include <linux/module.h> +#include <linux/init.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/platform_device.h> @@ -91,7 +93,6 @@ static const struct of_device_id berlin_reset_dt_match[] = { { .compatible = "marvell,berlin2-reset" }, { }, }; -MODULE_DEVICE_TABLE(of, berlin_reset_dt_match); static struct platform_driver berlin_reset_driver = { .probe = berlin2_reset_probe, @@ -100,9 +101,4 @@ static struct platform_driver berlin_reset_driver = { .of_match_table = berlin_reset_dt_match, }, }; -module_platform_driver(berlin_reset_driver); - -MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>"); -MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>"); -MODULE_DESCRIPTION("Marvell Berlin reset driver"); -MODULE_LICENSE("GPL"); +builtin_platform_driver(berlin_reset_driver); diff --git a/drivers/reset/reset-lpc18xx.c b/drivers/reset/reset-lpc18xx.c index 54cca00..a62ad52 100644 --- a/drivers/reset/reset-lpc18xx.c +++ b/drivers/reset/reset-lpc18xx.c @@ -13,7 +13,7 @@ #include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> -#include <linux/module.h> +#include <linux/init.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/reboot.h> @@ -218,39 +218,17 @@ dis_clk_reg: return ret; } -static int lpc18xx_rgu_remove(struct platform_device *pdev) -{ - struct lpc18xx_rgu_data *rc = platform_get_drvdata(pdev); - int ret; - - ret = unregister_restart_handler(&rc->restart_nb); - if (ret) - dev_warn(&pdev->dev, "failed to unregister restart handler\n"); - - reset_controller_unregister(&rc->rcdev); - - clk_disable_unprepare(rc->clk_delay); - clk_disable_unprepare(rc->clk_reg); - - return 0; -} - static const struct of_device_id lpc18xx_rgu_match[] = { { .compatible = "nxp,lpc1850-rgu" }, { } }; -MODULE_DEVICE_TABLE(of, lpc18xx_rgu_match); static struct platform_driver lpc18xx_rgu_driver = { .probe = lpc18xx_rgu_probe, - .remove = lpc18xx_rgu_remove, .driver = { - .name = "lpc18xx-reset", - .of_match_table = lpc18xx_rgu_match, + .name = "lpc18xx-reset", + .of_match_table = lpc18xx_rgu_match, + .suppress_bind_attrs = true, }, }; -module_platform_driver(lpc18xx_rgu_driver); - -MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>"); -MODULE_DESCRIPTION("Reset driver for LPC18xx/43xx RGU"); -MODULE_LICENSE("GPL v2"); +builtin_platform_driver(lpc18xx_rgu_driver); diff --git a/drivers/reset/reset-oxnas.c b/drivers/reset/reset-oxnas.c index 9449805..0d9036d 100644 --- a/drivers/reset/reset-oxnas.c +++ b/drivers/reset/reset-oxnas.c @@ -80,6 +80,7 @@ static const struct reset_control_ops oxnas_reset_ops = { static const struct of_device_id oxnas_reset_dt_ids[] = { { .compatible = "oxsemi,ox810se-reset", }, + { .compatible = "oxsemi,ox820-reset", }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, oxnas_reset_dt_ids); diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c index 78ebf84..43e4a9f 100644 --- a/drivers/reset/reset-socfpga.c +++ b/drivers/reset/reset-socfpga.c @@ -1,4 +1,6 @@ /* + * Socfpga Reset Controller Driver + * * Copyright 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de> * * based on @@ -16,7 +18,7 @@ #include <linux/err.h> #include <linux/io.h> -#include <linux/module.h> +#include <linux/init.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/reset-controller.h> @@ -148,8 +150,4 @@ static struct platform_driver socfpga_reset_driver = { .of_match_table = socfpga_reset_dt_ids, }, }; -module_platform_driver(socfpga_reset_driver); - -MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar@pengutronix.de"); -MODULE_DESCRIPTION("Socfpga Reset Controller Driver"); -MODULE_LICENSE("GPL"); +builtin_platform_driver(socfpga_reset_driver); diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c index 3080190..b44f6b5 100644 --- a/drivers/reset/reset-sunxi.c +++ b/drivers/reset/reset-sunxi.c @@ -13,7 +13,7 @@ #include <linux/err.h> #include <linux/io.h> -#include <linux/module.h> +#include <linux/init.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/platform_device.h> @@ -142,7 +142,6 @@ static const struct of_device_id sunxi_reset_dt_ids[] = { { .compatible = "allwinner,sun6i-a31-clock-reset", }, { /* sentinel */ }, }; -MODULE_DEVICE_TABLE(of, sunxi_reset_dt_ids); static int sunxi_reset_probe(struct platform_device *pdev) { @@ -175,8 +174,4 @@ static struct platform_driver sunxi_reset_driver = { .of_match_table = sunxi_reset_dt_ids, }, }; -module_platform_driver(sunxi_reset_driver); - -MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com"); -MODULE_DESCRIPTION("Allwinner SoCs Reset Controller Driver"); -MODULE_LICENSE("GPL"); +builtin_platform_driver(sunxi_reset_driver); diff --git a/drivers/reset/reset-zynq.c b/drivers/reset/reset-zynq.c index 138f2f2..87a4e35 100644 --- a/drivers/reset/reset-zynq.c +++ b/drivers/reset/reset-zynq.c @@ -3,6 +3,8 @@ * * Xilinx Zynq Reset controller driver * + * Author: Moritz Fischer <moritz.fischer@ettus.com> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. @@ -15,7 +17,7 @@ #include <linux/err.h> #include <linux/io.h> -#include <linux/module.h> +#include <linux/init.h> #include <linux/mfd/syscon.h> #include <linux/of.h> #include <linux/platform_device.h> @@ -137,8 +139,4 @@ static struct platform_driver zynq_reset_driver = { .of_match_table = zynq_reset_dt_ids, }, }; -module_platform_driver(zynq_reset_driver); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Moritz Fischer <moritz.fischer@ettus.com>"); -MODULE_DESCRIPTION("Zynq Reset Controller Driver"); +builtin_platform_driver(zynq_reset_driver); diff --git a/drivers/reset/sti/Kconfig b/drivers/reset/sti/Kconfig index 6131785..71592b5 100644 --- a/drivers/reset/sti/Kconfig +++ b/drivers/reset/sti/Kconfig @@ -3,14 +3,6 @@ if ARCH_STI config STI_RESET_SYSCFG bool -config STIH415_RESET - bool - select STI_RESET_SYSCFG - -config STIH416_RESET - bool - select STI_RESET_SYSCFG - config STIH407_RESET bool select STI_RESET_SYSCFG diff --git a/drivers/reset/sti/Makefile b/drivers/reset/sti/Makefile index dc85dfb..f9d8241 100644 --- a/drivers/reset/sti/Makefile +++ b/drivers/reset/sti/Makefile @@ -1,5 +1,3 @@ obj-$(CONFIG_STI_RESET_SYSCFG) += reset-syscfg.o -obj-$(CONFIG_STIH415_RESET) += reset-stih415.o -obj-$(CONFIG_STIH416_RESET) += reset-stih416.o obj-$(CONFIG_STIH407_RESET) += reset-stih407.o diff --git a/drivers/reset/sti/reset-stih415.c b/drivers/reset/sti/reset-stih415.c deleted file mode 100644 index 6f220cd..0000000 --- a/drivers/reset/sti/reset-stih415.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited - * Author: Stephen Gallimore <stephen.gallimore@st.com> - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#include <linux/module.h> -#include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/platform_device.h> - -#include <dt-bindings/reset/stih415-resets.h> - -#include "reset-syscfg.h" - -/* - * STiH415 Peripheral powerdown definitions. - */ -static const char stih415_front[] = "st,stih415-front-syscfg"; -static const char stih415_rear[] = "st,stih415-rear-syscfg"; -static const char stih415_sbc[] = "st,stih415-sbc-syscfg"; -static const char stih415_lpm[] = "st,stih415-lpm-syscfg"; - -#define STIH415_PDN_FRONT(_bit) \ - _SYSCFG_RST_CH(stih415_front, SYSCFG_114, _bit, SYSSTAT_187, _bit) - -#define STIH415_PDN_REAR(_cntl, _stat) \ - _SYSCFG_RST_CH(stih415_rear, SYSCFG_336, _cntl, SYSSTAT_384, _stat) - -#define STIH415_SRST_REAR(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih415_rear, _reg, _bit) - -#define STIH415_SRST_SBC(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih415_sbc, _reg, _bit) - -#define STIH415_SRST_FRONT(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih415_front, _reg, _bit) - -#define STIH415_SRST_LPM(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih415_lpm, _reg, _bit) - -#define SYSCFG_114 0x38 /* Powerdown request EMI/NAND/Keyscan */ -#define SYSSTAT_187 0x15c /* Powerdown status EMI/NAND/Keyscan */ - -#define SYSCFG_336 0x90 /* Powerdown request USB/SATA/PCIe */ -#define SYSSTAT_384 0x150 /* Powerdown status USB/SATA/PCIe */ - -#define SYSCFG_376 0x130 /* Reset generator 0 control 0 */ -#define SYSCFG_166 0x108 /* Softreset Ethernet 0 */ -#define SYSCFG_31 0x7c /* Softreset Ethernet 1 */ -#define LPM_SYSCFG_1 0x4 /* Softreset IRB */ - -static const struct syscfg_reset_channel_data stih415_powerdowns[] = { - [STIH415_EMISS_POWERDOWN] = STIH415_PDN_FRONT(0), - [STIH415_NAND_POWERDOWN] = STIH415_PDN_FRONT(1), - [STIH415_KEYSCAN_POWERDOWN] = STIH415_PDN_FRONT(2), - [STIH415_USB0_POWERDOWN] = STIH415_PDN_REAR(0, 0), - [STIH415_USB1_POWERDOWN] = STIH415_PDN_REAR(1, 1), - [STIH415_USB2_POWERDOWN] = STIH415_PDN_REAR(2, 2), - [STIH415_SATA0_POWERDOWN] = STIH415_PDN_REAR(3, 3), - [STIH415_SATA1_POWERDOWN] = STIH415_PDN_REAR(4, 4), - [STIH415_PCIE_POWERDOWN] = STIH415_PDN_REAR(5, 8), -}; - -static const struct syscfg_reset_channel_data stih415_softresets[] = { - [STIH415_ETH0_SOFTRESET] = STIH415_SRST_FRONT(SYSCFG_166, 0), - [STIH415_ETH1_SOFTRESET] = STIH415_SRST_SBC(SYSCFG_31, 0), - [STIH415_IRB_SOFTRESET] = STIH415_SRST_LPM(LPM_SYSCFG_1, 6), - [STIH415_USB0_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 9), - [STIH415_USB1_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 10), - [STIH415_USB2_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 11), - [STIH415_KEYSCAN_SOFTRESET] = STIH415_SRST_LPM(LPM_SYSCFG_1, 8), -}; - -static struct syscfg_reset_controller_data stih415_powerdown_controller = { - .wait_for_ack = true, - .nr_channels = ARRAY_SIZE(stih415_powerdowns), - .channels = stih415_powerdowns, -}; - -static struct syscfg_reset_controller_data stih415_softreset_controller = { - .wait_for_ack = false, - .active_low = true, - .nr_channels = ARRAY_SIZE(stih415_softresets), - .channels = stih415_softresets, -}; - -static const struct of_device_id stih415_reset_match[] = { - { .compatible = "st,stih415-powerdown", - .data = &stih415_powerdown_controller, }, - { .compatible = "st,stih415-softreset", - .data = &stih415_softreset_controller, }, - {}, -}; - -static struct platform_driver stih415_reset_driver = { - .probe = syscfg_reset_probe, - .driver = { - .name = "reset-stih415", - .of_match_table = stih415_reset_match, - }, -}; - -static int __init stih415_reset_init(void) -{ - return platform_driver_register(&stih415_reset_driver); -} -arch_initcall(stih415_reset_init); diff --git a/drivers/reset/sti/reset-stih416.c b/drivers/reset/sti/reset-stih416.c deleted file mode 100644 index c581d60..0000000 --- a/drivers/reset/sti/reset-stih416.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited - * Author: Stephen Gallimore <stephen.gallimore@st.com> - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#include <linux/module.h> -#include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/platform_device.h> - -#include <dt-bindings/reset/stih416-resets.h> - -#include "reset-syscfg.h" - -/* - * STiH416 Peripheral powerdown definitions. - */ -static const char stih416_front[] = "st,stih416-front-syscfg"; -static const char stih416_rear[] = "st,stih416-rear-syscfg"; -static const char stih416_sbc[] = "st,stih416-sbc-syscfg"; -static const char stih416_lpm[] = "st,stih416-lpm-syscfg"; -static const char stih416_cpu[] = "st,stih416-cpu-syscfg"; - -#define STIH416_PDN_FRONT(_bit) \ - _SYSCFG_RST_CH(stih416_front, SYSCFG_1500, _bit, SYSSTAT_1578, _bit) - -#define STIH416_PDN_REAR(_cntl, _stat) \ - _SYSCFG_RST_CH(stih416_rear, SYSCFG_2525, _cntl, SYSSTAT_2583, _stat) - -#define SYSCFG_1500 0x7d0 /* Powerdown request EMI/NAND/Keyscan */ -#define SYSSTAT_1578 0x908 /* Powerdown status EMI/NAND/Keyscan */ - -#define SYSCFG_2525 0x834 /* Powerdown request USB/SATA/PCIe */ -#define SYSSTAT_2583 0x91c /* Powerdown status USB/SATA/PCIe */ - -#define SYSCFG_2552 0x8A0 /* Reset Generator control 0 */ -#define SYSCFG_1539 0x86c /* Softreset Ethernet 0 */ -#define SYSCFG_510 0x7f8 /* Softreset Ethernet 1 */ -#define LPM_SYSCFG_1 0x4 /* Softreset IRB */ -#define SYSCFG_2553 0x8a4 /* Softreset SATA0/1, PCIE0/1 */ -#define SYSCFG_7563 0x8cc /* MPE softresets 0 */ -#define SYSCFG_7564 0x8d0 /* MPE softresets 1 */ - -#define STIH416_SRST_CPU(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih416_cpu, _reg, _bit) - -#define STIH416_SRST_FRONT(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih416_front, _reg, _bit) - -#define STIH416_SRST_REAR(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih416_rear, _reg, _bit) - -#define STIH416_SRST_LPM(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih416_lpm, _reg, _bit) - -#define STIH416_SRST_SBC(_reg, _bit) \ - _SYSCFG_RST_CH_NO_ACK(stih416_sbc, _reg, _bit) - -static const struct syscfg_reset_channel_data stih416_powerdowns[] = { - [STIH416_EMISS_POWERDOWN] = STIH416_PDN_FRONT(0), - [STIH416_NAND_POWERDOWN] = STIH416_PDN_FRONT(1), - [STIH416_KEYSCAN_POWERDOWN] = STIH416_PDN_FRONT(2), - [STIH416_USB0_POWERDOWN] = STIH416_PDN_REAR(0, 0), - [STIH416_USB1_POWERDOWN] = STIH416_PDN_REAR(1, 1), - [STIH416_USB2_POWERDOWN] = STIH416_PDN_REAR(2, 2), - [STIH416_USB3_POWERDOWN] = STIH416_PDN_REAR(6, 5), - [STIH416_SATA0_POWERDOWN] = STIH416_PDN_REAR(3, 3), - [STIH416_SATA1_POWERDOWN] = STIH416_PDN_REAR(4, 4), - [STIH416_PCIE0_POWERDOWN] = STIH416_PDN_REAR(7, 9), - [STIH416_PCIE1_POWERDOWN] = STIH416_PDN_REAR(5, 8), -}; - -static const struct syscfg_reset_channel_data stih416_softresets[] = { - [STIH416_ETH0_SOFTRESET] = STIH416_SRST_FRONT(SYSCFG_1539, 0), - [STIH416_ETH1_SOFTRESET] = STIH416_SRST_SBC(SYSCFG_510, 0), - [STIH416_IRB_SOFTRESET] = STIH416_SRST_LPM(LPM_SYSCFG_1, 6), - [STIH416_USB0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 9), - [STIH416_USB1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 10), - [STIH416_USB2_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 11), - [STIH416_USB3_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 28), - [STIH416_SATA0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 7), - [STIH416_SATA1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 3), - [STIH416_PCIE0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 15), - [STIH416_PCIE1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 2), - [STIH416_AUD_DAC_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 14), - [STIH416_HDTVOUT_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 5), - [STIH416_VTAC_M_RX_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 25), - [STIH416_VTAC_A_RX_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 26), - [STIH416_SYNC_HD_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 5), - [STIH416_SYNC_SD_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 6), - [STIH416_BLITTER_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 10), - [STIH416_GPU_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 11), - [STIH416_VTAC_M_TX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 18), - [STIH416_VTAC_A_TX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 19), - [STIH416_VTG_AUX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 21), - [STIH416_JPEG_DEC_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 23), - [STIH416_HVA_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 2), - [STIH416_COMPO_M_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 3), - [STIH416_COMPO_A_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 4), - [STIH416_VP8_DEC_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 10), - [STIH416_VTG_MAIN_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 16), - [STIH416_KEYSCAN_SOFTRESET] = STIH416_SRST_LPM(LPM_SYSCFG_1, 8), -}; - -static struct syscfg_reset_controller_data stih416_powerdown_controller = { - .wait_for_ack = true, - .nr_channels = ARRAY_SIZE(stih416_powerdowns), - .channels = stih416_powerdowns, -}; - -static struct syscfg_reset_controller_data stih416_softreset_controller = { - .wait_for_ack = false, - .active_low = true, - .nr_channels = ARRAY_SIZE(stih416_softresets), - .channels = stih416_softresets, -}; - -static const struct of_device_id stih416_reset_match[] = { - { .compatible = "st,stih416-powerdown", - .data = &stih416_powerdown_controller, }, - { .compatible = "st,stih416-softreset", - .data = &stih416_softreset_controller, }, - {}, -}; - -static struct platform_driver stih416_reset_driver = { - .probe = syscfg_reset_probe, - .driver = { - .name = "reset-stih416", - .of_match_table = stih416_reset_match, - }, -}; - -static int __init stih416_reset_init(void) -{ - return platform_driver_register(&stih416_reset_driver); -} -arch_initcall(stih416_reset_init); diff --git a/drivers/reset/tegra/Kconfig b/drivers/reset/tegra/Kconfig new file mode 100644 index 0000000..d2afa29 --- /dev/null +++ b/drivers/reset/tegra/Kconfig @@ -0,0 +1,2 @@ +config RESET_TEGRA_BPMP + def_bool TEGRA_BPMP diff --git a/drivers/reset/tegra/Makefile b/drivers/reset/tegra/Makefile new file mode 100644 index 0000000..775243a --- /dev/null +++ b/drivers/reset/tegra/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_RESET_TEGRA_BPMP) += reset-bpmp.o diff --git a/drivers/reset/tegra/reset-bpmp.c b/drivers/reset/tegra/reset-bpmp.c new file mode 100644 index 0000000..5daf2ee --- /dev/null +++ b/drivers/reset/tegra/reset-bpmp.c @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2016 NVIDIA Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/reset-controller.h> + +#include <soc/tegra/bpmp.h> +#include <soc/tegra/bpmp-abi.h> + +static struct tegra_bpmp *to_tegra_bpmp(struct reset_controller_dev *rstc) +{ + return container_of(rstc, struct tegra_bpmp, rstc); +} + +static int tegra_bpmp_reset_common(struct reset_controller_dev *rstc, + enum mrq_reset_commands command, + unsigned int id) +{ + struct tegra_bpmp *bpmp = to_tegra_bpmp(rstc); + struct mrq_reset_request request; + struct tegra_bpmp_message msg; + + memset(&request, 0, sizeof(request)); + request.cmd = command; + request.reset_id = id; + + memset(&msg, 0, sizeof(msg)); + msg.mrq = MRQ_RESET; + msg.tx.data = &request; + msg.tx.size = sizeof(request); + + return tegra_bpmp_transfer(bpmp, &msg); +} + +static int tegra_bpmp_reset_module(struct reset_controller_dev *rstc, + unsigned long id) +{ + return tegra_bpmp_reset_common(rstc, CMD_RESET_MODULE, id); +} + +static int tegra_bpmp_reset_assert(struct reset_controller_dev *rstc, + unsigned long id) +{ + return tegra_bpmp_reset_common(rstc, CMD_RESET_ASSERT, id); +} + +static int tegra_bpmp_reset_deassert(struct reset_controller_dev *rstc, + unsigned long id) +{ + return tegra_bpmp_reset_common(rstc, CMD_RESET_DEASSERT, id); +} + +static const struct reset_control_ops tegra_bpmp_reset_ops = { + .reset = tegra_bpmp_reset_module, + .assert = tegra_bpmp_reset_assert, + .deassert = tegra_bpmp_reset_deassert, +}; + +int tegra_bpmp_init_resets(struct tegra_bpmp *bpmp) +{ + bpmp->rstc.ops = &tegra_bpmp_reset_ops; + bpmp->rstc.owner = THIS_MODULE; + bpmp->rstc.of_node = bpmp->dev->of_node; + bpmp->rstc.nr_resets = bpmp->soc->num_resets; + + return devm_reset_controller_register(bpmp->dev, &bpmp->rstc); +} diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig index 0a4ea80..609bb34 100644 --- a/drivers/soc/mediatek/Kconfig +++ b/drivers/soc/mediatek/Kconfig @@ -23,7 +23,7 @@ config MTK_PMIC_WRAP config MTK_SCPSYS bool "MediaTek SCPSYS Support" depends on ARCH_MEDIATEK || COMPILE_TEST - default ARM64 && ARCH_MEDIATEK + default ARCH_MEDIATEK select REGMAP select MTK_INFRACFG select PM_GENERIC_DOMAINS if PM diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c index 837effe..beb7916 100644 --- a/drivers/soc/mediatek/mtk-scpsys.c +++ b/drivers/soc/mediatek/mtk-scpsys.c @@ -11,17 +11,16 @@ * GNU General Public License for more details. */ #include <linux/clk.h> -#include <linux/delay.h> +#include <linux/init.h> #include <linux/io.h> -#include <linux/kernel.h> #include <linux/mfd/syscon.h> -#include <linux/init.h> #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/pm_domain.h> -#include <linux/regmap.h> -#include <linux/soc/mediatek/infracfg.h> #include <linux/regulator/consumer.h> +#include <linux/soc/mediatek/infracfg.h> + +#include <dt-bindings/power/mt2701-power.h> #include <dt-bindings/power/mt8173-power.h> #define SPM_VDE_PWR_CON 0x0210 @@ -29,11 +28,17 @@ #define SPM_VEN_PWR_CON 0x0230 #define SPM_ISP_PWR_CON 0x0238 #define SPM_DIS_PWR_CON 0x023c +#define SPM_CONN_PWR_CON 0x0280 #define SPM_VEN2_PWR_CON 0x0298 -#define SPM_AUDIO_PWR_CON 0x029c +#define SPM_AUDIO_PWR_CON 0x029c /* MT8173 */ +#define SPM_BDP_PWR_CON 0x029c /* MT2701 */ +#define SPM_ETH_PWR_CON 0x02a0 +#define SPM_HIF_PWR_CON 0x02a4 +#define SPM_IFR_MSC_PWR_CON 0x02a8 #define SPM_MFG_2D_PWR_CON 0x02c0 #define SPM_MFG_ASYNC_PWR_CON 0x02c4 #define SPM_USB_PWR_CON 0x02cc + #define SPM_PWR_STATUS 0x060c #define SPM_PWR_STATUS_2ND 0x0610 @@ -43,10 +48,15 @@ #define PWR_ON_2ND_BIT BIT(3) #define PWR_CLK_DIS_BIT BIT(4) +#define PWR_STATUS_CONN BIT(1) #define PWR_STATUS_DISP BIT(3) #define PWR_STATUS_MFG BIT(4) #define PWR_STATUS_ISP BIT(5) #define PWR_STATUS_VDEC BIT(7) +#define PWR_STATUS_BDP BIT(14) +#define PWR_STATUS_ETH BIT(15) +#define PWR_STATUS_HIF BIT(16) +#define PWR_STATUS_IFR_MSC BIT(17) #define PWR_STATUS_VENC_LT BIT(20) #define PWR_STATUS_VENC BIT(21) #define PWR_STATUS_MFG_2D BIT(22) @@ -55,12 +65,23 @@ #define PWR_STATUS_USB BIT(25) enum clk_id { - MT8173_CLK_NONE, - MT8173_CLK_MM, - MT8173_CLK_MFG, - MT8173_CLK_VENC, - MT8173_CLK_VENC_LT, - MT8173_CLK_MAX, + CLK_NONE, + CLK_MM, + CLK_MFG, + CLK_VENC, + CLK_VENC_LT, + CLK_ETHIF, + CLK_MAX, +}; + +static const char * const clk_names[] = { + NULL, + "mm", + "mfg", + "venc", + "venc_lt", + "ethif", + NULL, }; #define MAX_CLKS 2 @@ -76,98 +97,6 @@ struct scp_domain_data { bool active_wakeup; }; -static const struct scp_domain_data scp_domain_data[] = { - [MT8173_POWER_DOMAIN_VDEC] = { - .name = "vdec", - .sta_mask = PWR_STATUS_VDEC, - .ctl_offs = SPM_VDE_PWR_CON, - .sram_pdn_bits = GENMASK(11, 8), - .sram_pdn_ack_bits = GENMASK(12, 12), - .clk_id = {MT8173_CLK_MM}, - }, - [MT8173_POWER_DOMAIN_VENC] = { - .name = "venc", - .sta_mask = PWR_STATUS_VENC, - .ctl_offs = SPM_VEN_PWR_CON, - .sram_pdn_bits = GENMASK(11, 8), - .sram_pdn_ack_bits = GENMASK(15, 12), - .clk_id = {MT8173_CLK_MM, MT8173_CLK_VENC}, - }, - [MT8173_POWER_DOMAIN_ISP] = { - .name = "isp", - .sta_mask = PWR_STATUS_ISP, - .ctl_offs = SPM_ISP_PWR_CON, - .sram_pdn_bits = GENMASK(11, 8), - .sram_pdn_ack_bits = GENMASK(13, 12), - .clk_id = {MT8173_CLK_MM}, - }, - [MT8173_POWER_DOMAIN_MM] = { - .name = "mm", - .sta_mask = PWR_STATUS_DISP, - .ctl_offs = SPM_DIS_PWR_CON, - .sram_pdn_bits = GENMASK(11, 8), - .sram_pdn_ack_bits = GENMASK(12, 12), - .clk_id = {MT8173_CLK_MM}, - .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MM_M0 | - MT8173_TOP_AXI_PROT_EN_MM_M1, - }, - [MT8173_POWER_DOMAIN_VENC_LT] = { - .name = "venc_lt", - .sta_mask = PWR_STATUS_VENC_LT, - .ctl_offs = SPM_VEN2_PWR_CON, - .sram_pdn_bits = GENMASK(11, 8), - .sram_pdn_ack_bits = GENMASK(15, 12), - .clk_id = {MT8173_CLK_MM, MT8173_CLK_VENC_LT}, - }, - [MT8173_POWER_DOMAIN_AUDIO] = { - .name = "audio", - .sta_mask = PWR_STATUS_AUDIO, - .ctl_offs = SPM_AUDIO_PWR_CON, - .sram_pdn_bits = GENMASK(11, 8), - .sram_pdn_ack_bits = GENMASK(15, 12), - .clk_id = {MT8173_CLK_NONE}, - }, - [MT8173_POWER_DOMAIN_USB] = { - .name = "usb", - .sta_mask = PWR_STATUS_USB, - .ctl_offs = SPM_USB_PWR_CON, - .sram_pdn_bits = GENMASK(11, 8), - .sram_pdn_ack_bits = GENMASK(15, 12), - .clk_id = {MT8173_CLK_NONE}, - .active_wakeup = true, - }, - [MT8173_POWER_DOMAIN_MFG_ASYNC] = { - .name = "mfg_async", - .sta_mask = PWR_STATUS_MFG_ASYNC, - .ctl_offs = SPM_MFG_ASYNC_PWR_CON, - .sram_pdn_bits = GENMASK(11, 8), - .sram_pdn_ack_bits = 0, - .clk_id = {MT8173_CLK_MFG}, - }, - [MT8173_POWER_DOMAIN_MFG_2D] = { - .name = "mfg_2d", - .sta_mask = PWR_STATUS_MFG_2D, - .ctl_offs = SPM_MFG_2D_PWR_CON, - .sram_pdn_bits = GENMASK(11, 8), - .sram_pdn_ack_bits = GENMASK(13, 12), - .clk_id = {MT8173_CLK_NONE}, - }, - [MT8173_POWER_DOMAIN_MFG] = { - .name = "mfg", - .sta_mask = PWR_STATUS_MFG, - .ctl_offs = SPM_MFG_PWR_CON, - .sram_pdn_bits = GENMASK(13, 8), - .sram_pdn_ack_bits = GENMASK(21, 16), - .clk_id = {MT8173_CLK_NONE}, - .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MFG_S | - MT8173_TOP_AXI_PROT_EN_MFG_M0 | - MT8173_TOP_AXI_PROT_EN_MFG_M1 | - MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT, - }, -}; - -#define NUM_DOMAINS ARRAY_SIZE(scp_domain_data) - struct scp; struct scp_domain { @@ -179,7 +108,7 @@ struct scp_domain { }; struct scp { - struct scp_domain domains[NUM_DOMAINS]; + struct scp_domain *domains; struct genpd_onecell_data pd_data; struct device *dev; void __iomem *base; @@ -408,57 +337,55 @@ static bool scpsys_active_wakeup(struct device *dev) return scpd->data->active_wakeup; } -static int scpsys_probe(struct platform_device *pdev) +static void init_clks(struct platform_device *pdev, struct clk **clk) +{ + int i; + + for (i = CLK_NONE + 1; i < CLK_MAX; i++) + clk[i] = devm_clk_get(&pdev->dev, clk_names[i]); +} + +static struct scp *init_scp(struct platform_device *pdev, + const struct scp_domain_data *scp_domain_data, int num) { struct genpd_onecell_data *pd_data; struct resource *res; - int i, j, ret; + int i, j; struct scp *scp; - struct clk *clk[MT8173_CLK_MAX]; + struct clk *clk[CLK_MAX]; scp = devm_kzalloc(&pdev->dev, sizeof(*scp), GFP_KERNEL); if (!scp) - return -ENOMEM; + return ERR_PTR(-ENOMEM); scp->dev = &pdev->dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); scp->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(scp->base)) - return PTR_ERR(scp->base); + return ERR_CAST(scp->base); + + scp->domains = devm_kzalloc(&pdev->dev, + sizeof(*scp->domains) * num, GFP_KERNEL); + if (!scp->domains) + return ERR_PTR(-ENOMEM); pd_data = &scp->pd_data; pd_data->domains = devm_kzalloc(&pdev->dev, - sizeof(*pd_data->domains) * NUM_DOMAINS, GFP_KERNEL); + sizeof(*pd_data->domains) * num, GFP_KERNEL); if (!pd_data->domains) - return -ENOMEM; - - clk[MT8173_CLK_MM] = devm_clk_get(&pdev->dev, "mm"); - if (IS_ERR(clk[MT8173_CLK_MM])) - return PTR_ERR(clk[MT8173_CLK_MM]); - - clk[MT8173_CLK_MFG] = devm_clk_get(&pdev->dev, "mfg"); - if (IS_ERR(clk[MT8173_CLK_MFG])) - return PTR_ERR(clk[MT8173_CLK_MFG]); - - clk[MT8173_CLK_VENC] = devm_clk_get(&pdev->dev, "venc"); - if (IS_ERR(clk[MT8173_CLK_VENC])) - return PTR_ERR(clk[MT8173_CLK_VENC]); - - clk[MT8173_CLK_VENC_LT] = devm_clk_get(&pdev->dev, "venc_lt"); - if (IS_ERR(clk[MT8173_CLK_VENC_LT])) - return PTR_ERR(clk[MT8173_CLK_VENC_LT]); + return ERR_PTR(-ENOMEM); scp->infracfg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "infracfg"); if (IS_ERR(scp->infracfg)) { dev_err(&pdev->dev, "Cannot find infracfg controller: %ld\n", PTR_ERR(scp->infracfg)); - return PTR_ERR(scp->infracfg); + return ERR_CAST(scp->infracfg); } - for (i = 0; i < NUM_DOMAINS; i++) { + for (i = 0; i < num; i++) { struct scp_domain *scpd = &scp->domains[i]; const struct scp_domain_data *data = &scp_domain_data[i]; @@ -467,13 +394,15 @@ static int scpsys_probe(struct platform_device *pdev) if (PTR_ERR(scpd->supply) == -ENODEV) scpd->supply = NULL; else - return PTR_ERR(scpd->supply); + return ERR_CAST(scpd->supply); } } - pd_data->num_domains = NUM_DOMAINS; + pd_data->num_domains = num; + + init_clks(pdev, clk); - for (i = 0; i < NUM_DOMAINS; i++) { + for (i = 0; i < num; i++) { struct scp_domain *scpd = &scp->domains[i]; struct generic_pm_domain *genpd = &scpd->genpd; const struct scp_domain_data *data = &scp_domain_data[i]; @@ -482,13 +411,37 @@ static int scpsys_probe(struct platform_device *pdev) scpd->scp = scp; scpd->data = data; - for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) - scpd->clk[j] = clk[data->clk_id[j]]; + + for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) { + struct clk *c = clk[data->clk_id[j]]; + + if (IS_ERR(c)) { + dev_err(&pdev->dev, "%s: clk unavailable\n", + data->name); + return ERR_CAST(c); + } + + scpd->clk[j] = c; + } genpd->name = data->name; genpd->power_off = scpsys_power_off; genpd->power_on = scpsys_power_on; genpd->dev_ops.active_wakeup = scpsys_active_wakeup; + } + + return scp; +} + +static void mtk_register_power_domains(struct platform_device *pdev, + struct scp *scp, int num) +{ + struct genpd_onecell_data *pd_data; + int i, ret; + + for (i = 0; i < num; i++) { + struct scp_domain *scpd = &scp->domains[i]; + struct generic_pm_domain *genpd = &scpd->genpd; /* * Initially turn on all domains to make the domains usable @@ -507,6 +460,222 @@ static int scpsys_probe(struct platform_device *pdev) * valid. */ + pd_data = &scp->pd_data; + + ret = of_genpd_add_provider_onecell(pdev->dev.of_node, pd_data); + if (ret) + dev_err(&pdev->dev, "Failed to add OF provider: %d\n", ret); +} + +/* + * MT2701 power domain support + */ + +static const struct scp_domain_data scp_domain_data_mt2701[] = { + [MT2701_POWER_DOMAIN_CONN] = { + .name = "conn", + .sta_mask = PWR_STATUS_CONN, + .ctl_offs = SPM_CONN_PWR_CON, + .bus_prot_mask = 0x0104, + .clk_id = {CLK_NONE}, + .active_wakeup = true, + }, + [MT2701_POWER_DOMAIN_DISP] = { + .name = "disp", + .sta_mask = PWR_STATUS_DISP, + .ctl_offs = SPM_DIS_PWR_CON, + .sram_pdn_bits = GENMASK(11, 8), + .clk_id = {CLK_MM}, + .bus_prot_mask = 0x0002, + .active_wakeup = true, + }, + [MT2701_POWER_DOMAIN_MFG] = { + .name = "mfg", + .sta_mask = PWR_STATUS_MFG, + .ctl_offs = SPM_MFG_PWR_CON, + .sram_pdn_bits = GENMASK(11, 8), + .sram_pdn_ack_bits = GENMASK(12, 12), + .clk_id = {CLK_MFG}, + .active_wakeup = true, + }, + [MT2701_POWER_DOMAIN_VDEC] = { + .name = "vdec", + .sta_mask = PWR_STATUS_VDEC, + .ctl_offs = SPM_VDE_PWR_CON, + .sram_pdn_bits = GENMASK(11, 8), + .sram_pdn_ack_bits = GENMASK(12, 12), + .clk_id = {CLK_MM}, + .active_wakeup = true, + }, + [MT2701_POWER_DOMAIN_ISP] = { + .name = "isp", + .sta_mask = PWR_STATUS_ISP, + .ctl_offs = SPM_ISP_PWR_CON, + .sram_pdn_bits = GENMASK(11, 8), + .sram_pdn_ack_bits = GENMASK(13, 12), + .clk_id = {CLK_MM}, + .active_wakeup = true, + }, + [MT2701_POWER_DOMAIN_BDP] = { + .name = "bdp", + .sta_mask = PWR_STATUS_BDP, + .ctl_offs = SPM_BDP_PWR_CON, + .sram_pdn_bits = GENMASK(11, 8), + .clk_id = {CLK_NONE}, + .active_wakeup = true, + }, + [MT2701_POWER_DOMAIN_ETH] = { + .name = "eth", + .sta_mask = PWR_STATUS_ETH, + .ctl_offs = SPM_ETH_PWR_CON, + .sram_pdn_bits = GENMASK(11, 8), + .sram_pdn_ack_bits = GENMASK(15, 12), + .clk_id = {CLK_ETHIF}, + .active_wakeup = true, + }, + [MT2701_POWER_DOMAIN_HIF] = { + .name = "hif", + .sta_mask = PWR_STATUS_HIF, + .ctl_offs = SPM_HIF_PWR_CON, + .sram_pdn_bits = GENMASK(11, 8), + .sram_pdn_ack_bits = GENMASK(15, 12), + .clk_id = {CLK_ETHIF}, + .active_wakeup = true, + }, + [MT2701_POWER_DOMAIN_IFR_MSC] = { + .name = "ifr_msc", + .sta_mask = PWR_STATUS_IFR_MSC, + .ctl_offs = SPM_IFR_MSC_PWR_CON, + .clk_id = {CLK_NONE}, + .active_wakeup = true, + }, +}; + +#define NUM_DOMAINS_MT2701 ARRAY_SIZE(scp_domain_data_mt2701) + +static int __init scpsys_probe_mt2701(struct platform_device *pdev) +{ + struct scp *scp; + + scp = init_scp(pdev, scp_domain_data_mt2701, NUM_DOMAINS_MT2701); + if (IS_ERR(scp)) + return PTR_ERR(scp); + + mtk_register_power_domains(pdev, scp, NUM_DOMAINS_MT2701); + + return 0; +} + +/* + * MT8173 power domain support + */ + +static const struct scp_domain_data scp_domain_data_mt8173[] = { + [MT8173_POWER_DOMAIN_VDEC] = { + .name = "vdec", + .sta_mask = PWR_STATUS_VDEC, + .ctl_offs = SPM_VDE_PWR_CON, + .sram_pdn_bits = GENMASK(11, 8), + .sram_pdn_ack_bits = GENMASK(12, 12), + .clk_id = {CLK_MM}, + }, + [MT8173_POWER_DOMAIN_VENC] = { + .name = "venc", + .sta_mask = PWR_STATUS_VENC, + .ctl_offs = SPM_VEN_PWR_CON, + .sram_pdn_bits = GENMASK(11, 8), + .sram_pdn_ack_bits = GENMASK(15, 12), + .clk_id = {CLK_MM, CLK_VENC}, + }, + [MT8173_POWER_DOMAIN_ISP] = { + .name = "isp", + .sta_mask = PWR_STATUS_ISP, + .ctl_offs = SPM_ISP_PWR_CON, + .sram_pdn_bits = GENMASK(11, 8), + .sram_pdn_ack_bits = GENMASK(13, 12), + .clk_id = {CLK_MM}, + }, + [MT8173_POWER_DOMAIN_MM] = { + .name = "mm", + .sta_mask = PWR_STATUS_DISP, + .ctl_offs = SPM_DIS_PWR_CON, + .sram_pdn_bits = GENMASK(11, 8), + .sram_pdn_ack_bits = GENMASK(12, 12), + .clk_id = {CLK_MM}, + .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MM_M0 | + MT8173_TOP_AXI_PROT_EN_MM_M1, + }, + [MT8173_POWER_DOMAIN_VENC_LT] = { + .name = "venc_lt", + .sta_mask = PWR_STATUS_VENC_LT, + .ctl_offs = SPM_VEN2_PWR_CON, + .sram_pdn_bits = GENMASK(11, 8), + .sram_pdn_ack_bits = GENMASK(15, 12), + .clk_id = {CLK_MM, CLK_VENC_LT}, + }, + [MT8173_POWER_DOMAIN_AUDIO] = { + .name = "audio", + .sta_mask = PWR_STATUS_AUDIO, + .ctl_offs = SPM_AUDIO_PWR_CON, + .sram_pdn_bits = GENMASK(11, 8), + .sram_pdn_ack_bits = GENMASK(15, 12), + .clk_id = {CLK_NONE}, + }, + [MT8173_POWER_DOMAIN_USB] = { + .name = "usb", + .sta_mask = PWR_STATUS_USB, + .ctl_offs = SPM_USB_PWR_CON, + .sram_pdn_bits = GENMASK(11, 8), + .sram_pdn_ack_bits = GENMASK(15, 12), + .clk_id = {CLK_NONE}, + .active_wakeup = true, + }, + [MT8173_POWER_DOMAIN_MFG_ASYNC] = { + .name = "mfg_async", + .sta_mask = PWR_STATUS_MFG_ASYNC, + .ctl_offs = SPM_MFG_ASYNC_PWR_CON, + .sram_pdn_bits = GENMASK(11, 8), + .sram_pdn_ack_bits = 0, + .clk_id = {CLK_MFG}, + }, + [MT8173_POWER_DOMAIN_MFG_2D] = { + .name = "mfg_2d", + .sta_mask = PWR_STATUS_MFG_2D, + .ctl_offs = SPM_MFG_2D_PWR_CON, + .sram_pdn_bits = GENMASK(11, 8), + .sram_pdn_ack_bits = GENMASK(13, 12), + .clk_id = {CLK_NONE}, + }, + [MT8173_POWER_DOMAIN_MFG] = { + .name = "mfg", + .sta_mask = PWR_STATUS_MFG, + .ctl_offs = SPM_MFG_PWR_CON, + .sram_pdn_bits = GENMASK(13, 8), + .sram_pdn_ack_bits = GENMASK(21, 16), + .clk_id = {CLK_NONE}, + .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MFG_S | + MT8173_TOP_AXI_PROT_EN_MFG_M0 | + MT8173_TOP_AXI_PROT_EN_MFG_M1 | + MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT, + }, +}; + +#define NUM_DOMAINS_MT8173 ARRAY_SIZE(scp_domain_data_mt8173) + +static int __init scpsys_probe_mt8173(struct platform_device *pdev) +{ + struct scp *scp; + struct genpd_onecell_data *pd_data; + int ret; + + scp = init_scp(pdev, scp_domain_data_mt8173, NUM_DOMAINS_MT8173); + if (IS_ERR(scp)) + return PTR_ERR(scp); + + mtk_register_power_domains(pdev, scp, NUM_DOMAINS_MT8173); + + pd_data = &scp->pd_data; + ret = pm_genpd_add_subdomain(pd_data->domains[MT8173_POWER_DOMAIN_MFG_ASYNC], pd_data->domains[MT8173_POWER_DOMAIN_MFG_2D]); if (ret && IS_ENABLED(CONFIG_PM)) @@ -517,21 +686,39 @@ static int scpsys_probe(struct platform_device *pdev) if (ret && IS_ENABLED(CONFIG_PM)) dev_err(&pdev->dev, "Failed to add subdomain: %d\n", ret); - ret = of_genpd_add_provider_onecell(pdev->dev.of_node, pd_data); - if (ret) - dev_err(&pdev->dev, "Failed to add OF provider: %d\n", ret); - return 0; } +/* + * scpsys driver init + */ + static const struct of_device_id of_scpsys_match_tbl[] = { { + .compatible = "mediatek,mt2701-scpsys", + .data = scpsys_probe_mt2701, + }, { .compatible = "mediatek,mt8173-scpsys", + .data = scpsys_probe_mt8173, }, { /* sentinel */ } }; +static int scpsys_probe(struct platform_device *pdev) +{ + int (*probe)(struct platform_device *); + const struct of_device_id *of_id; + + of_id = of_match_node(of_scpsys_match_tbl, pdev->dev.of_node); + if (!of_id || !of_id->data) + return -EINVAL; + + probe = of_id->data; + + return probe(pdev); +} + static struct platform_driver scpsys_drv = { .probe = scpsys_probe, .driver = { diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile index 86cc78c..d9115cb 100644 --- a/drivers/soc/renesas/Makefile +++ b/drivers/soc/renesas/Makefile @@ -1,8 +1,12 @@ +obj-$(CONFIG_SOC_BUS) += renesas-soc.o + obj-$(CONFIG_ARCH_RCAR_GEN1) += rcar-rst.o obj-$(CONFIG_ARCH_RCAR_GEN2) += rcar-rst.o obj-$(CONFIG_ARCH_R8A7795) += rcar-rst.o obj-$(CONFIG_ARCH_R8A7796) += rcar-rst.o +obj-$(CONFIG_ARCH_R8A7743) += rcar-sysc.o r8a7743-sysc.o +obj-$(CONFIG_ARCH_R8A7745) += rcar-sysc.o r8a7745-sysc.o obj-$(CONFIG_ARCH_R8A7779) += rcar-sysc.o r8a7779-sysc.o obj-$(CONFIG_ARCH_R8A7790) += rcar-sysc.o r8a7790-sysc.o obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o r8a7791-sysc.o diff --git a/drivers/soc/renesas/r8a7743-sysc.c b/drivers/soc/renesas/r8a7743-sysc.c new file mode 100644 index 0000000..9583a32 --- /dev/null +++ b/drivers/soc/renesas/r8a7743-sysc.c @@ -0,0 +1,32 @@ +/* + * Renesas RZ/G1M System Controller + * + * Copyright (C) 2016 Cogent Embedded Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; of the License. + */ + +#include <linux/bug.h> +#include <linux/kernel.h> + +#include <dt-bindings/power/r8a7743-sysc.h> + +#include "rcar-sysc.h" + +static const struct rcar_sysc_area r8a7743_areas[] __initconst = { + { "always-on", 0, 0, R8A7743_PD_ALWAYS_ON, -1, PD_ALWAYS_ON }, + { "ca15-scu", 0x180, 0, R8A7743_PD_CA15_SCU, R8A7743_PD_ALWAYS_ON, + PD_SCU }, + { "ca15-cpu0", 0x40, 0, R8A7743_PD_CA15_CPU0, R8A7743_PD_CA15_SCU, + PD_CPU_NOCR }, + { "ca15-cpu1", 0x40, 1, R8A7743_PD_CA15_CPU1, R8A7743_PD_CA15_SCU, + PD_CPU_NOCR }, + { "sgx", 0xc0, 0, R8A7743_PD_SGX, R8A7743_PD_ALWAYS_ON }, +}; + +const struct rcar_sysc_info r8a7743_sysc_info __initconst = { + .areas = r8a7743_areas, + .num_areas = ARRAY_SIZE(r8a7743_areas), +}; diff --git a/drivers/soc/renesas/r8a7745-sysc.c b/drivers/soc/renesas/r8a7745-sysc.c new file mode 100644 index 0000000..d17887c --- /dev/null +++ b/drivers/soc/renesas/r8a7745-sysc.c @@ -0,0 +1,32 @@ +/* + * Renesas RZ/G1E System Controller + * + * Copyright (C) 2016 Cogent Embedded Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; of the License. + */ + +#include <linux/bug.h> +#include <linux/kernel.h> + +#include <dt-bindings/power/r8a7745-sysc.h> + +#include "rcar-sysc.h" + +static const struct rcar_sysc_area r8a7745_areas[] __initconst = { + { "always-on", 0, 0, R8A7745_PD_ALWAYS_ON, -1, PD_ALWAYS_ON }, + { "ca7-scu", 0x100, 0, R8A7745_PD_CA7_SCU, R8A7745_PD_ALWAYS_ON, + PD_SCU }, + { "ca7-cpu0", 0x1c0, 0, R8A7745_PD_CA7_CPU0, R8A7745_PD_CA7_SCU, + PD_CPU_NOCR }, + { "ca7-cpu1", 0x1c0, 1, R8A7745_PD_CA7_CPU1, R8A7745_PD_CA7_SCU, + PD_CPU_NOCR }, + { "sgx", 0xc0, 0, R8A7745_PD_SGX, R8A7745_PD_ALWAYS_ON }, +}; + +const struct rcar_sysc_info r8a7745_sysc_info __initconst = { + .areas = r8a7745_areas, + .num_areas = ARRAY_SIZE(r8a7745_areas), +}; diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 65c8e1e..225c35c 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -275,6 +275,12 @@ finalize: } static const struct of_device_id rcar_sysc_matches[] = { +#ifdef CONFIG_ARCH_R8A7743 + { .compatible = "renesas,r8a7743-sysc", .data = &r8a7743_sysc_info }, +#endif +#ifdef CONFIG_ARCH_R8A7745 + { .compatible = "renesas,r8a7745-sysc", .data = &r8a7745_sysc_info }, +#endif #ifdef CONFIG_ARCH_R8A7779 { .compatible = "renesas,r8a7779-sysc", .data = &r8a7779_sysc_info }, #endif diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h index 77dbe86..f6e842e 100644 --- a/drivers/soc/renesas/rcar-sysc.h +++ b/drivers/soc/renesas/rcar-sysc.h @@ -50,6 +50,8 @@ struct rcar_sysc_info { unsigned int num_areas; }; +extern const struct rcar_sysc_info r8a7743_sysc_info; +extern const struct rcar_sysc_info r8a7745_sysc_info; extern const struct rcar_sysc_info r8a7779_sysc_info; extern const struct rcar_sysc_info r8a7790_sysc_info; extern const struct rcar_sysc_info r8a7791_sysc_info; diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c new file mode 100644 index 0000000..3309603 --- /dev/null +++ b/drivers/soc/renesas/renesas-soc.c @@ -0,0 +1,257 @@ +/* + * Renesas SoC Identification + * + * Copyright (C) 2014-2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/sys_soc.h> + + +struct renesas_family { + const char name[16]; + u32 reg; /* CCCR or PRR, if not in DT */ +}; + +static const struct renesas_family fam_rcar_gen1 __initconst __maybe_unused = { + .name = "R-Car Gen1", + .reg = 0xff000044, /* PRR (Product Register) */ +}; + +static const struct renesas_family fam_rcar_gen2 __initconst __maybe_unused = { + .name = "R-Car Gen2", + .reg = 0xff000044, /* PRR (Product Register) */ +}; + +static const struct renesas_family fam_rcar_gen3 __initconst __maybe_unused = { + .name = "R-Car Gen3", + .reg = 0xfff00044, /* PRR (Product Register) */ +}; + +static const struct renesas_family fam_rmobile __initconst __maybe_unused = { + .name = "R-Mobile", + .reg = 0xe600101c, /* CCCR (Common Chip Code Register) */ +}; + +static const struct renesas_family fam_rza __initconst __maybe_unused = { + .name = "RZ/A", +}; + +static const struct renesas_family fam_rzg __initconst __maybe_unused = { + .name = "RZ/G", + .reg = 0xff000044, /* PRR (Product Register) */ +}; + +static const struct renesas_family fam_shmobile __initconst __maybe_unused = { + .name = "SH-Mobile", + .reg = 0xe600101c, /* CCCR (Common Chip Code Register) */ +}; + + +struct renesas_soc { + const struct renesas_family *family; + u8 id; +}; + +static const struct renesas_soc soc_rz_a1h __initconst __maybe_unused = { + .family = &fam_rza, +}; + +static const struct renesas_soc soc_rmobile_ape6 __initconst __maybe_unused = { + .family = &fam_rmobile, + .id = 0x3f, +}; + +static const struct renesas_soc soc_rmobile_a1 __initconst __maybe_unused = { + .family = &fam_rmobile, + .id = 0x40, +}; + +static const struct renesas_soc soc_rz_g1m __initconst __maybe_unused = { + .family = &fam_rzg, + .id = 0x47, +}; + +static const struct renesas_soc soc_rz_g1e __initconst __maybe_unused = { + .family = &fam_rzg, + .id = 0x4c, +}; + +static const struct renesas_soc soc_rcar_m1a __initconst __maybe_unused = { + .family = &fam_rcar_gen1, +}; + +static const struct renesas_soc soc_rcar_h1 __initconst __maybe_unused = { + .family = &fam_rcar_gen1, + .id = 0x3b, +}; + +static const struct renesas_soc soc_rcar_h2 __initconst __maybe_unused = { + .family = &fam_rcar_gen2, + .id = 0x45, +}; + +static const struct renesas_soc soc_rcar_m2_w __initconst __maybe_unused = { + .family = &fam_rcar_gen2, + .id = 0x47, +}; + +static const struct renesas_soc soc_rcar_v2h __initconst __maybe_unused = { + .family = &fam_rcar_gen2, + .id = 0x4a, +}; + +static const struct renesas_soc soc_rcar_m2_n __initconst __maybe_unused = { + .family = &fam_rcar_gen2, + .id = 0x4b, +}; + +static const struct renesas_soc soc_rcar_e2 __initconst __maybe_unused = { + .family = &fam_rcar_gen2, + .id = 0x4c, +}; + +static const struct renesas_soc soc_rcar_h3 __initconst __maybe_unused = { + .family = &fam_rcar_gen3, + .id = 0x4f, +}; + +static const struct renesas_soc soc_rcar_m3_w __initconst __maybe_unused = { + .family = &fam_rcar_gen3, + .id = 0x52, +}; + +static const struct renesas_soc soc_shmobile_ag5 __initconst __maybe_unused = { + .family = &fam_shmobile, + .id = 0x37, +}; + + +static const struct of_device_id renesas_socs[] __initconst = { +#ifdef CONFIG_ARCH_R7S72100 + { .compatible = "renesas,r7s72100", .data = &soc_rz_a1h }, +#endif +#ifdef CONFIG_ARCH_R8A73A4 + { .compatible = "renesas,r8a73a4", .data = &soc_rmobile_ape6 }, +#endif +#ifdef CONFIG_ARCH_R8A7740 + { .compatible = "renesas,r8a7740", .data = &soc_rmobile_a1 }, +#endif +#ifdef CONFIG_ARCH_R8A7743 + { .compatible = "renesas,r8a7743", .data = &soc_rz_g1m }, +#endif +#ifdef CONFIG_ARCH_R8A7745 + { .compatible = "renesas,r8a7745", .data = &soc_rz_g1e }, +#endif +#ifdef CONFIG_ARCH_R8A7778 + { .compatible = "renesas,r8a7778", .data = &soc_rcar_m1a }, +#endif +#ifdef CONFIG_ARCH_R8A7779 + { .compatible = "renesas,r8a7779", .data = &soc_rcar_h1 }, +#endif +#ifdef CONFIG_ARCH_R8A7790 + { .compatible = "renesas,r8a7790", .data = &soc_rcar_h2 }, +#endif +#ifdef CONFIG_ARCH_R8A7791 + { .compatible = "renesas,r8a7791", .data = &soc_rcar_m2_w }, +#endif +#ifdef CONFIG_ARCH_R8A7792 + { .compatible = "renesas,r8a7792", .data = &soc_rcar_v2h }, +#endif +#ifdef CONFIG_ARCH_R8A7793 + { .compatible = "renesas,r8a7793", .data = &soc_rcar_m2_n }, +#endif +#ifdef CONFIG_ARCH_R8A7794 + { .compatible = "renesas,r8a7794", .data = &soc_rcar_e2 }, +#endif +#ifdef CONFIG_ARCH_R8A7795 + { .compatible = "renesas,r8a7795", .data = &soc_rcar_h3 }, +#endif +#ifdef CONFIG_ARCH_R8A7796 + { .compatible = "renesas,r8a7796", .data = &soc_rcar_m3_w }, +#endif +#ifdef CONFIG_ARCH_SH73A0 + { .compatible = "renesas,sh73a0", .data = &soc_shmobile_ag5 }, +#endif + { /* sentinel */ } +}; + +static int __init renesas_soc_init(void) +{ + struct soc_device_attribute *soc_dev_attr; + const struct renesas_family *family; + const struct of_device_id *match; + const struct renesas_soc *soc; + void __iomem *chipid = NULL; + struct soc_device *soc_dev; + struct device_node *np; + unsigned int product; + + match = of_match_node(renesas_socs, of_root); + if (!match) + return -ENODEV; + + soc = match->data; + family = soc->family; + + /* Try PRR first, then hardcoded fallback */ + np = of_find_compatible_node(NULL, NULL, "renesas,prr"); + if (np) { + chipid = of_iomap(np, 0); + of_node_put(np); + } else if (soc->id) { + chipid = ioremap(family->reg, 4); + } + if (chipid) { + product = readl(chipid); + iounmap(chipid); + if (soc->id && ((product >> 8) & 0xff) != soc->id) { + pr_warn("SoC mismatch (product = 0x%x)\n", product); + return -ENODEV; + } + } + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return -ENOMEM; + + np = of_find_node_by_path("/"); + of_property_read_string(np, "model", &soc_dev_attr->machine); + of_node_put(np); + + soc_dev_attr->family = kstrdup_const(family->name, GFP_KERNEL); + soc_dev_attr->soc_id = kstrdup_const(strchr(match->compatible, ',') + 1, + GFP_KERNEL); + if (chipid) + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "ES%u.%u", + ((product >> 4) & 0x0f) + 1, + product & 0xf); + + pr_info("Detected Renesas %s %s %s\n", soc_dev_attr->family, + soc_dev_attr->soc_id, soc_dev_attr->revision ?: ""); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->revision); + kfree_const(soc_dev_attr->soc_id); + kfree_const(soc_dev_attr->family); + kfree(soc_dev_attr); + return PTR_ERR(soc_dev); + } + + return 0; +} +core_initcall(renesas_soc_init); diff --git a/drivers/soc/rockchip/pm_domains.c b/drivers/soc/rockchip/pm_domains.c index 7acd151..1c78c42 100644 --- a/drivers/soc/rockchip/pm_domains.c +++ b/drivers/soc/rockchip/pm_domains.c @@ -9,6 +9,7 @@ */ #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/err.h> #include <linux/pm_clock.h> #include <linux/pm_domain.h> @@ -105,12 +106,24 @@ static bool rockchip_pmu_domain_is_idle(struct rockchip_pm_domain *pd) return (val & pd_info->idle_mask) == pd_info->idle_mask; } +static unsigned int rockchip_pmu_read_ack(struct rockchip_pmu *pmu) +{ + unsigned int val; + + regmap_read(pmu->regmap, pmu->info->ack_offset, &val); + return val; +} + static int rockchip_pmu_set_idle_request(struct rockchip_pm_domain *pd, bool idle) { const struct rockchip_domain_info *pd_info = pd->info; + struct generic_pm_domain *genpd = &pd->genpd; struct rockchip_pmu *pmu = pd->pmu; + unsigned int target_ack; unsigned int val; + bool is_idle; + int ret; if (pd_info->req_mask == 0) return 0; @@ -120,12 +133,26 @@ static int rockchip_pmu_set_idle_request(struct rockchip_pm_domain *pd, dsb(sy); - do { - regmap_read(pmu->regmap, pmu->info->ack_offset, &val); - } while ((val & pd_info->ack_mask) != (idle ? pd_info->ack_mask : 0)); + /* Wait util idle_ack = 1 */ + target_ack = idle ? pd_info->ack_mask : 0; + ret = readx_poll_timeout_atomic(rockchip_pmu_read_ack, pmu, val, + (val & pd_info->ack_mask) == target_ack, + 0, 10000); + if (ret) { + dev_err(pmu->dev, + "failed to get ack on domain '%s', val=0x%x\n", + genpd->name, val); + return ret; + } - while (rockchip_pmu_domain_is_idle(pd) != idle) - cpu_relax(); + ret = readx_poll_timeout_atomic(rockchip_pmu_domain_is_idle, pd, + is_idle, is_idle == idle, 0, 10000); + if (ret) { + dev_err(pmu->dev, + "failed to set idle on domain '%s', val=%d\n", + genpd->name, is_idle); + return ret; + } return 0; } @@ -198,6 +225,8 @@ static void rockchip_do_pmu_set_power_domain(struct rockchip_pm_domain *pd, bool on) { struct rockchip_pmu *pmu = pd->pmu; + struct generic_pm_domain *genpd = &pd->genpd; + bool is_on; if (pd->info->pwr_mask == 0) return; @@ -207,8 +236,13 @@ static void rockchip_do_pmu_set_power_domain(struct rockchip_pm_domain *pd, dsb(sy); - while (rockchip_pmu_domain_is_on(pd) != on) - cpu_relax(); + if (readx_poll_timeout_atomic(rockchip_pmu_domain_is_on, pd, is_on, + is_on == on, 0, 10000)) { + dev_err(pmu->dev, + "failed to set domain '%s', val=%d\n", + genpd->name, is_on); + return; + } } static int rockchip_pd_power(struct rockchip_pm_domain *pd, bool power_on) @@ -445,7 +479,16 @@ err_out: static void rockchip_pm_remove_one_domain(struct rockchip_pm_domain *pd) { - int i; + int i, ret; + + /* + * We're in the error cleanup already, so we only complain, + * but won't emit another error on top of the original one. + */ + ret = pm_genpd_remove(&pd->genpd); + if (ret < 0) + dev_err(pd->pmu->dev, "failed to remove domain '%s' : %d - state may be inconsistent\n", + pd->genpd.name, ret); for (i = 0; i < pd->num_clks; i++) { clk_unprepare(pd->clks[i]); @@ -597,10 +640,12 @@ static int rockchip_pm_domain_probe(struct platform_device *pdev) * Configure power up and down transition delays for CORE * and GPU domains. */ - rockchip_configure_pd_cnt(pmu, pmu_info->core_pwrcnt_offset, - pmu_info->core_power_transition_time); - rockchip_configure_pd_cnt(pmu, pmu_info->gpu_pwrcnt_offset, - pmu_info->gpu_power_transition_time); + if (pmu_info->core_power_transition_time) + rockchip_configure_pd_cnt(pmu, pmu_info->core_pwrcnt_offset, + pmu_info->core_power_transition_time); + if (pmu_info->gpu_pwrcnt_offset) + rockchip_configure_pd_cnt(pmu, pmu_info->gpu_pwrcnt_offset, + pmu_info->gpu_power_transition_time); error = -ENODEV; @@ -627,7 +672,11 @@ static int rockchip_pm_domain_probe(struct platform_device *pdev) goto err_out; } - of_genpd_add_provider_onecell(np, &pmu->genpd_data); + error = of_genpd_add_provider_onecell(np, &pmu->genpd_data); + if (error) { + dev_err(dev, "failed to add provider: %d\n", error); + goto err_out; + } return 0; @@ -722,11 +771,7 @@ static const struct rockchip_pmu_info rk3399_pmu = { .idle_offset = 0x64, .ack_offset = 0x68, - .core_pwrcnt_offset = 0x9c, - .gpu_pwrcnt_offset = 0xa4, - - .core_power_transition_time = 24, - .gpu_power_transition_time = 24, + /* ARM Trusted Firmware manages power transition times */ .num_domains = ARRAY_SIZE(rk3399_pm_domains), .domain_info = rk3399_pm_domains, diff --git a/drivers/soc/tegra/Kconfig b/drivers/soc/tegra/Kconfig index 03089ad..e5e124c 100644 --- a/drivers/soc/tegra/Kconfig +++ b/drivers/soc/tegra/Kconfig @@ -77,5 +77,19 @@ config ARCH_TEGRA_210_SOC controllers, such as GPIO, I2C, SPI, SDHCI, PCIe, SATA and XHCI, to name only a few. +config ARCH_TEGRA_186_SOC + bool "NVIDIA Tegra186 SoC" + select MAILBOX + select TEGRA_BPMP + select TEGRA_HSP_MBOX + select TEGRA_IVC + help + Enable support for the NVIDIA Tegar186 SoC. The Tegra186 features a + combination of Denver and Cortex-A57 CPU cores and a GPU based on + the Pascal architecture. It contains an ADSP with a Cortex-A9 CPU + used for audio processing, hardware video encoders/decoders with + multi-format support, ISP for image capture processing and BPMP for + power management. + endif endif diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c index 7792ed8..e233dd5 100644 --- a/drivers/soc/tegra/pmc.c +++ b/drivers/soc/tegra/pmc.c @@ -45,29 +45,31 @@ #include <soc/tegra/pmc.h> #define PMC_CNTRL 0x0 -#define PMC_CNTRL_SYSCLK_POLARITY (1 << 10) /* sys clk polarity */ -#define PMC_CNTRL_SYSCLK_OE (1 << 11) /* system clock enable */ -#define PMC_CNTRL_SIDE_EFFECT_LP0 (1 << 14) /* LP0 when CPU pwr gated */ -#define PMC_CNTRL_CPU_PWRREQ_POLARITY (1 << 15) /* CPU pwr req polarity */ -#define PMC_CNTRL_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */ -#define PMC_CNTRL_INTR_POLARITY (1 << 17) /* inverts INTR polarity */ -#define PMC_CNTRL_MAIN_RST (1 << 4) +#define PMC_CNTRL_INTR_POLARITY BIT(17) /* inverts INTR polarity */ +#define PMC_CNTRL_CPU_PWRREQ_OE BIT(16) /* CPU pwr req enable */ +#define PMC_CNTRL_CPU_PWRREQ_POLARITY BIT(15) /* CPU pwr req polarity */ +#define PMC_CNTRL_SIDE_EFFECT_LP0 BIT(14) /* LP0 when CPU pwr gated */ +#define PMC_CNTRL_SYSCLK_OE BIT(11) /* system clock enable */ +#define PMC_CNTRL_SYSCLK_POLARITY BIT(10) /* sys clk polarity */ +#define PMC_CNTRL_MAIN_RST BIT(4) #define DPD_SAMPLE 0x020 -#define DPD_SAMPLE_ENABLE (1 << 0) +#define DPD_SAMPLE_ENABLE BIT(0) #define DPD_SAMPLE_DISABLE (0 << 0) #define PWRGATE_TOGGLE 0x30 -#define PWRGATE_TOGGLE_START (1 << 8) +#define PWRGATE_TOGGLE_START BIT(8) #define REMOVE_CLAMPING 0x34 #define PWRGATE_STATUS 0x38 +#define PMC_PWR_DET 0x48 + #define PMC_SCRATCH0 0x50 -#define PMC_SCRATCH0_MODE_RECOVERY (1 << 31) -#define PMC_SCRATCH0_MODE_BOOTLOADER (1 << 30) -#define PMC_SCRATCH0_MODE_RCM (1 << 1) +#define PMC_SCRATCH0_MODE_RECOVERY BIT(31) +#define PMC_SCRATCH0_MODE_BOOTLOADER BIT(30) +#define PMC_SCRATCH0_MODE_RCM BIT(1) #define PMC_SCRATCH0_MODE_MASK (PMC_SCRATCH0_MODE_RECOVERY | \ PMC_SCRATCH0_MODE_BOOTLOADER | \ PMC_SCRATCH0_MODE_RCM) @@ -75,11 +77,13 @@ #define PMC_CPUPWRGOOD_TIMER 0xc8 #define PMC_CPUPWROFF_TIMER 0xcc +#define PMC_PWR_DET_VALUE 0xe4 + #define PMC_SCRATCH41 0x140 #define PMC_SENSOR_CTRL 0x1b0 -#define PMC_SENSOR_CTRL_SCRATCH_WRITE (1 << 2) -#define PMC_SENSOR_CTRL_ENABLE_RST (1 << 1) +#define PMC_SENSOR_CTRL_SCRATCH_WRITE BIT(2) +#define PMC_SENSOR_CTRL_ENABLE_RST BIT(1) #define PMC_RST_STATUS 0x1b4 #define PMC_RST_STATUS_POR 0 @@ -90,10 +94,10 @@ #define PMC_RST_STATUS_AOTAG 5 #define IO_DPD_REQ 0x1b8 -#define IO_DPD_REQ_CODE_IDLE (0 << 30) -#define IO_DPD_REQ_CODE_OFF (1 << 30) -#define IO_DPD_REQ_CODE_ON (2 << 30) -#define IO_DPD_REQ_CODE_MASK (3 << 30) +#define IO_DPD_REQ_CODE_IDLE (0U << 30) +#define IO_DPD_REQ_CODE_OFF (1U << 30) +#define IO_DPD_REQ_CODE_ON (2U << 30) +#define IO_DPD_REQ_CODE_MASK (3U << 30) #define IO_DPD_STATUS 0x1bc #define IO_DPD2_REQ 0x1c0 @@ -101,16 +105,16 @@ #define SEL_DPD_TIM 0x1c8 #define PMC_SCRATCH54 0x258 -#define PMC_SCRATCH54_DATA_SHIFT 8 -#define PMC_SCRATCH54_ADDR_SHIFT 0 +#define PMC_SCRATCH54_DATA_SHIFT 8 +#define PMC_SCRATCH54_ADDR_SHIFT 0 #define PMC_SCRATCH55 0x25c -#define PMC_SCRATCH55_RESET_TEGRA (1 << 31) -#define PMC_SCRATCH55_CNTRL_ID_SHIFT 27 -#define PMC_SCRATCH55_PINMUX_SHIFT 24 -#define PMC_SCRATCH55_16BITOP (1 << 15) -#define PMC_SCRATCH55_CHECKSUM_SHIFT 16 -#define PMC_SCRATCH55_I2CSLV1_SHIFT 0 +#define PMC_SCRATCH55_RESET_TEGRA BIT(31) +#define PMC_SCRATCH55_CNTRL_ID_SHIFT 27 +#define PMC_SCRATCH55_PINMUX_SHIFT 24 +#define PMC_SCRATCH55_16BITOP BIT(15) +#define PMC_SCRATCH55_CHECKSUM_SHIFT 16 +#define PMC_SCRATCH55_I2CSLV1_SHIFT 0 #define GPU_RG_CNTRL 0x2d4 @@ -124,6 +128,12 @@ struct tegra_powergate { unsigned int num_resets; }; +struct tegra_io_pad_soc { + enum tegra_io_pad id; + unsigned int dpd; + unsigned int voltage; +}; + struct tegra_pmc_soc { unsigned int num_powergates; const char *const *powergates; @@ -132,6 +142,9 @@ struct tegra_pmc_soc { bool has_tsense_reset; bool has_gpu_clamps; + + const struct tegra_io_pad_soc *io_pads; + unsigned int num_io_pads; }; /** @@ -238,8 +251,6 @@ static int tegra_powergate_lookup(struct tegra_pmc *pmc, const char *name) return i; } - dev_err(pmc->dev, "powergate %s not found\n", name); - return -ENODEV; } @@ -456,13 +467,12 @@ disable_clks: static int tegra_genpd_power_on(struct generic_pm_domain *domain) { struct tegra_powergate *pg = to_powergate(domain); - struct tegra_pmc *pmc = pg->pmc; int err; err = tegra_powergate_power_up(pg, true); if (err) - dev_err(pmc->dev, "failed to turn on PM domain %s: %d\n", - pg->genpd.name, err); + pr_err("failed to turn on PM domain %s: %d\n", pg->genpd.name, + err); return err; } @@ -470,13 +480,12 @@ static int tegra_genpd_power_on(struct generic_pm_domain *domain) static int tegra_genpd_power_off(struct generic_pm_domain *domain) { struct tegra_powergate *pg = to_powergate(domain); - struct tegra_pmc *pmc = pg->pmc; int err; err = tegra_powergate_power_down(pg); if (err) - dev_err(pmc->dev, "failed to turn off PM domain %s: %d\n", - pg->genpd.name, err); + pr_err("failed to turn off PM domain %s: %d\n", + pg->genpd.name, err); return err; } @@ -801,8 +810,7 @@ static void tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np) id = tegra_powergate_lookup(pmc, np->name); if (id < 0) { - dev_err(pmc->dev, "powergate lookup failed for %s: %d\n", - np->name, id); + pr_err("powergate lookup failed for %s: %d\n", np->name, id); goto free_mem; } @@ -822,20 +830,22 @@ static void tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np) err = tegra_powergate_of_get_clks(pg, np); if (err < 0) { - dev_err(pmc->dev, "failed to get clocks for %s: %d\n", - np->name, err); + pr_err("failed to get clocks for %s: %d\n", np->name, err); goto set_available; } err = tegra_powergate_of_get_resets(pg, np, off); if (err < 0) { - dev_err(pmc->dev, "failed to get resets for %s: %d\n", - np->name, err); + pr_err("failed to get resets for %s: %d\n", np->name, err); goto remove_clks; } - if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS)) - goto power_on_cleanup; + if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS)) { + if (off) + WARN_ON(tegra_powergate_power_up(pg, true)); + + goto remove_resets; + } /* * FIXME: If XHCI is enabled for Tegra, then power-up the XUSB @@ -846,25 +856,33 @@ static void tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np) * to be unused. */ if (IS_ENABLED(CONFIG_USB_XHCI_TEGRA) && - (id == TEGRA_POWERGATE_XUSBA || id == TEGRA_POWERGATE_XUSBC)) - goto power_on_cleanup; + (id == TEGRA_POWERGATE_XUSBA || id == TEGRA_POWERGATE_XUSBC)) { + if (off) + WARN_ON(tegra_powergate_power_up(pg, true)); + + goto remove_resets; + } - pm_genpd_init(&pg->genpd, NULL, off); + err = pm_genpd_init(&pg->genpd, NULL, off); + if (err < 0) { + pr_err("failed to initialise PM domain %s: %d\n", np->name, + err); + goto remove_resets; + } err = of_genpd_add_provider_simple(np, &pg->genpd); if (err < 0) { - dev_err(pmc->dev, "failed to add genpd provider for %s: %d\n", - np->name, err); - goto remove_resets; + pr_err("failed to add PM domain provider for %s: %d\n", + np->name, err); + goto remove_genpd; } - dev_dbg(pmc->dev, "added power domain %s\n", pg->genpd.name); + pr_debug("added PM domain %s\n", pg->genpd.name); return; -power_on_cleanup: - if (off) - WARN_ON(tegra_powergate_power_up(pg, true)); +remove_genpd: + pm_genpd_remove(&pg->genpd); remove_resets: while (pg->num_resets--) @@ -908,21 +926,36 @@ static void tegra_powergate_init(struct tegra_pmc *pmc, of_node_put(np); } -static int tegra_io_rail_prepare(unsigned int id, unsigned long *request, - unsigned long *status, unsigned int *bit) +static const struct tegra_io_pad_soc * +tegra_io_pad_find(struct tegra_pmc *pmc, enum tegra_io_pad id) { + unsigned int i; + + for (i = 0; i < pmc->soc->num_io_pads; i++) + if (pmc->soc->io_pads[i].id == id) + return &pmc->soc->io_pads[i]; + + return NULL; +} + +static int tegra_io_pad_prepare(enum tegra_io_pad id, unsigned long *request, + unsigned long *status, u32 *mask) +{ + const struct tegra_io_pad_soc *pad; unsigned long rate, value; - *bit = id % 32; + pad = tegra_io_pad_find(pmc, id); + if (!pad) { + pr_err("invalid I/O pad ID %u\n", id); + return -ENOENT; + } - /* - * There are two sets of 30 bits to select IO rails, but bits 30 and - * 31 are control bits rather than IO rail selection bits. - */ - if (id > 63 || *bit == 30 || *bit == 31) - return -EINVAL; + if (pad->dpd == UINT_MAX) + return -ENOTSUPP; - if (id < 32) { + *mask = BIT(pad->dpd % 32); + + if (pad->dpd < 32) { *status = IO_DPD_STATUS; *request = IO_DPD_REQ; } else { @@ -931,6 +964,10 @@ static int tegra_io_rail_prepare(unsigned int id, unsigned long *request, } rate = clk_get_rate(pmc->clk); + if (!rate) { + pr_err("failed to get clock rate\n"); + return -ENODEV; + } tegra_pmc_writel(DPD_SAMPLE_ENABLE, DPD_SAMPLE); @@ -942,10 +979,10 @@ static int tegra_io_rail_prepare(unsigned int id, unsigned long *request, return 0; } -static int tegra_io_rail_poll(unsigned long offset, unsigned long mask, - unsigned long val, unsigned long timeout) +static int tegra_io_pad_poll(unsigned long offset, u32 mask, + u32 val, unsigned long timeout) { - unsigned long value; + u32 value; timeout = jiffies + msecs_to_jiffies(timeout); @@ -960,67 +997,164 @@ static int tegra_io_rail_poll(unsigned long offset, unsigned long mask, return -ETIMEDOUT; } -static void tegra_io_rail_unprepare(void) +static void tegra_io_pad_unprepare(void) { tegra_pmc_writel(DPD_SAMPLE_DISABLE, DPD_SAMPLE); } -int tegra_io_rail_power_on(unsigned int id) +/** + * tegra_io_pad_power_enable() - enable power to I/O pad + * @id: Tegra I/O pad ID for which to enable power + * + * Returns: 0 on success or a negative error code on failure. + */ +int tegra_io_pad_power_enable(enum tegra_io_pad id) { unsigned long request, status; - unsigned int bit; + u32 mask; int err; mutex_lock(&pmc->powergates_lock); - err = tegra_io_rail_prepare(id, &request, &status, &bit); - if (err) - goto error; + err = tegra_io_pad_prepare(id, &request, &status, &mask); + if (err < 0) { + pr_err("failed to prepare I/O pad: %d\n", err); + goto unlock; + } - tegra_pmc_writel(IO_DPD_REQ_CODE_OFF | BIT(bit), request); + tegra_pmc_writel(IO_DPD_REQ_CODE_OFF | mask, request); - err = tegra_io_rail_poll(status, BIT(bit), 0, 250); - if (err) { - pr_info("tegra_io_rail_poll() failed: %d\n", err); - goto error; + err = tegra_io_pad_poll(status, mask, 0, 250); + if (err < 0) { + pr_err("failed to enable I/O pad: %d\n", err); + goto unlock; } - tegra_io_rail_unprepare(); + tegra_io_pad_unprepare(); -error: +unlock: mutex_unlock(&pmc->powergates_lock); - return err; } -EXPORT_SYMBOL(tegra_io_rail_power_on); +EXPORT_SYMBOL(tegra_io_pad_power_enable); -int tegra_io_rail_power_off(unsigned int id) +/** + * tegra_io_pad_power_disable() - disable power to I/O pad + * @id: Tegra I/O pad ID for which to disable power + * + * Returns: 0 on success or a negative error code on failure. + */ +int tegra_io_pad_power_disable(enum tegra_io_pad id) { unsigned long request, status; - unsigned int bit; + u32 mask; int err; mutex_lock(&pmc->powergates_lock); - err = tegra_io_rail_prepare(id, &request, &status, &bit); - if (err) { - pr_info("tegra_io_rail_prepare() failed: %d\n", err); - goto error; + err = tegra_io_pad_prepare(id, &request, &status, &mask); + if (err < 0) { + pr_err("failed to prepare I/O pad: %d\n", err); + goto unlock; } - tegra_pmc_writel(IO_DPD_REQ_CODE_ON | BIT(bit), request); + tegra_pmc_writel(IO_DPD_REQ_CODE_ON | mask, request); - err = tegra_io_rail_poll(status, BIT(bit), BIT(bit), 250); - if (err) - goto error; + err = tegra_io_pad_poll(status, mask, mask, 250); + if (err < 0) { + pr_err("failed to disable I/O pad: %d\n", err); + goto unlock; + } - tegra_io_rail_unprepare(); + tegra_io_pad_unprepare(); -error: +unlock: mutex_unlock(&pmc->powergates_lock); - return err; } +EXPORT_SYMBOL(tegra_io_pad_power_disable); + +int tegra_io_pad_set_voltage(enum tegra_io_pad id, + enum tegra_io_pad_voltage voltage) +{ + const struct tegra_io_pad_soc *pad; + u32 value; + + pad = tegra_io_pad_find(pmc, id); + if (!pad) + return -ENOENT; + + if (pad->voltage == UINT_MAX) + return -ENOTSUPP; + + mutex_lock(&pmc->powergates_lock); + + /* write-enable PMC_PWR_DET_VALUE[pad->voltage] */ + value = tegra_pmc_readl(PMC_PWR_DET); + value |= BIT(pad->voltage); + tegra_pmc_writel(value, PMC_PWR_DET); + + /* update I/O voltage */ + value = tegra_pmc_readl(PMC_PWR_DET_VALUE); + + if (voltage == TEGRA_IO_PAD_1800000UV) + value &= ~BIT(pad->voltage); + else + value |= BIT(pad->voltage); + + tegra_pmc_writel(value, PMC_PWR_DET_VALUE); + + mutex_unlock(&pmc->powergates_lock); + + usleep_range(100, 250); + + return 0; +} +EXPORT_SYMBOL(tegra_io_pad_set_voltage); + +int tegra_io_pad_get_voltage(enum tegra_io_pad id) +{ + const struct tegra_io_pad_soc *pad; + u32 value; + + pad = tegra_io_pad_find(pmc, id); + if (!pad) + return -ENOENT; + + if (pad->voltage == UINT_MAX) + return -ENOTSUPP; + + value = tegra_pmc_readl(PMC_PWR_DET_VALUE); + + if ((value & BIT(pad->voltage)) == 0) + return TEGRA_IO_PAD_1800000UV; + + return TEGRA_IO_PAD_3300000UV; +} +EXPORT_SYMBOL(tegra_io_pad_get_voltage); + +/** + * tegra_io_rail_power_on() - enable power to I/O rail + * @id: Tegra I/O pad ID for which to enable power + * + * See also: tegra_io_pad_power_enable() + */ +int tegra_io_rail_power_on(unsigned int id) +{ + return tegra_io_pad_power_enable(id); +} +EXPORT_SYMBOL(tegra_io_rail_power_on); + +/** + * tegra_io_rail_power_off() - disable power to I/O rail + * @id: Tegra I/O pad ID for which to disable power + * + * See also: tegra_io_pad_power_disable() + */ +int tegra_io_rail_power_off(unsigned int id) +{ + return tegra_io_pad_power_disable(id); +} EXPORT_SYMBOL(tegra_io_rail_power_off); #ifdef CONFIG_PM_SLEEP @@ -1454,6 +1588,39 @@ static const u8 tegra124_cpu_powergates[] = { TEGRA_POWERGATE_CPU3, }; +static const struct tegra_io_pad_soc tegra124_io_pads[] = { + { .id = TEGRA_IO_PAD_AUDIO, .dpd = 17, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_BB, .dpd = 15, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_CAM, .dpd = 36, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_COMP, .dpd = 22, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_CSIA, .dpd = 0, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_CSIB, .dpd = 1, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_CSIE, .dpd = 44, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_DSI, .dpd = 2, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_DSIB, .dpd = 39, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_DSIC, .dpd = 40, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_DSID, .dpd = 41, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_HDMI, .dpd = 28, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_HSIC, .dpd = 19, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_HV, .dpd = 38, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_LVDS, .dpd = 57, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_MIPI_BIAS, .dpd = 3, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_NAND, .dpd = 13, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_PEX_BIAS, .dpd = 4, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_PEX_CLK1, .dpd = 5, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_PEX_CLK2, .dpd = 6, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_PEX_CNTRL, .dpd = 32, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_SDMMC1, .dpd = 33, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_SDMMC3, .dpd = 34, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_SDMMC4, .dpd = 35, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_SYS_DDC, .dpd = 58, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_UART, .dpd = 14, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_USB0, .dpd = 9, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_USB1, .dpd = 10, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_USB2, .dpd = 11, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_USB_BIAS, .dpd = 12, .voltage = UINT_MAX }, +}; + static const struct tegra_pmc_soc tegra124_pmc_soc = { .num_powergates = ARRAY_SIZE(tegra124_powergates), .powergates = tegra124_powergates, @@ -1461,6 +1628,8 @@ static const struct tegra_pmc_soc tegra124_pmc_soc = { .cpu_powergates = tegra124_cpu_powergates, .has_tsense_reset = true, .has_gpu_clamps = true, + .num_io_pads = ARRAY_SIZE(tegra124_io_pads), + .io_pads = tegra124_io_pads, }; static const char * const tegra210_powergates[] = { @@ -1497,6 +1666,47 @@ static const u8 tegra210_cpu_powergates[] = { TEGRA_POWERGATE_CPU3, }; +static const struct tegra_io_pad_soc tegra210_io_pads[] = { + { .id = TEGRA_IO_PAD_AUDIO, .dpd = 17, .voltage = 5 }, + { .id = TEGRA_IO_PAD_AUDIO_HV, .dpd = 61, .voltage = 18 }, + { .id = TEGRA_IO_PAD_CAM, .dpd = 36, .voltage = 10 }, + { .id = TEGRA_IO_PAD_CSIA, .dpd = 0, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_CSIB, .dpd = 1, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_CSIC, .dpd = 42, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_CSID, .dpd = 43, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_CSIE, .dpd = 44, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_CSIF, .dpd = 45, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_DBG, .dpd = 25, .voltage = 19 }, + { .id = TEGRA_IO_PAD_DEBUG_NONAO, .dpd = 26, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_DMIC, .dpd = 50, .voltage = 20 }, + { .id = TEGRA_IO_PAD_DP, .dpd = 51, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_DSI, .dpd = 2, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_DSIB, .dpd = 39, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_DSIC, .dpd = 40, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_DSID, .dpd = 41, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_EMMC, .dpd = 35, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_EMMC2, .dpd = 37, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_GPIO, .dpd = 27, .voltage = 21 }, + { .id = TEGRA_IO_PAD_HDMI, .dpd = 28, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_HSIC, .dpd = 19, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_LVDS, .dpd = 57, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_MIPI_BIAS, .dpd = 3, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_PEX_BIAS, .dpd = 4, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_PEX_CLK1, .dpd = 5, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_PEX_CLK2, .dpd = 6, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_PEX_CNTRL, .dpd = UINT_MAX, .voltage = 11 }, + { .id = TEGRA_IO_PAD_SDMMC1, .dpd = 33, .voltage = 12 }, + { .id = TEGRA_IO_PAD_SDMMC3, .dpd = 34, .voltage = 13 }, + { .id = TEGRA_IO_PAD_SPI, .dpd = 46, .voltage = 22 }, + { .id = TEGRA_IO_PAD_SPI_HV, .dpd = 47, .voltage = 23 }, + { .id = TEGRA_IO_PAD_UART, .dpd = 14, .voltage = 2 }, + { .id = TEGRA_IO_PAD_USB0, .dpd = 9, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_USB1, .dpd = 10, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_USB2, .dpd = 11, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_USB3, .dpd = 18, .voltage = UINT_MAX }, + { .id = TEGRA_IO_PAD_USB_BIAS, .dpd = 12, .voltage = UINT_MAX }, +}; + static const struct tegra_pmc_soc tegra210_pmc_soc = { .num_powergates = ARRAY_SIZE(tegra210_powergates), .powergates = tegra210_powergates, @@ -1504,6 +1714,8 @@ static const struct tegra_pmc_soc tegra210_pmc_soc = { .cpu_powergates = tegra210_cpu_powergates, .has_tsense_reset = true, .has_gpu_clamps = true, + .num_io_pads = ARRAY_SIZE(tegra210_io_pads), + .io_pads = tegra210_io_pads, }; static const struct of_device_id tegra_pmc_match[] = { diff --git a/include/dt-bindings/clock/tegra186-clock.h b/include/dt-bindings/clock/tegra186-clock.h new file mode 100644 index 0000000..f73d320 --- /dev/null +++ b/include/dt-bindings/clock/tegra186-clock.h @@ -0,0 +1,940 @@ +/** @file */ + +#ifndef _MACH_T186_CLK_T186_H +#define _MACH_T186_CLK_T186_H + +/** + * @defgroup clock_ids Clock Identifiers + * @{ + * @defgroup extern_input external input clocks + * @{ + * @def TEGRA186_CLK_OSC + * @def TEGRA186_CLK_CLK_32K + * @def TEGRA186_CLK_DTV_INPUT + * @def TEGRA186_CLK_SOR0_PAD_CLKOUT + * @def TEGRA186_CLK_SOR1_PAD_CLKOUT + * @def TEGRA186_CLK_I2S1_SYNC_INPUT + * @def TEGRA186_CLK_I2S2_SYNC_INPUT + * @def TEGRA186_CLK_I2S3_SYNC_INPUT + * @def TEGRA186_CLK_I2S4_SYNC_INPUT + * @def TEGRA186_CLK_I2S5_SYNC_INPUT + * @def TEGRA186_CLK_I2S6_SYNC_INPUT + * @def TEGRA186_CLK_SPDIFIN_SYNC_INPUT + * @} + * + * @defgroup extern_output external output clocks + * @{ + * @def TEGRA186_CLK_EXTPERIPH1 + * @def TEGRA186_CLK_EXTPERIPH2 + * @def TEGRA186_CLK_EXTPERIPH3 + * @def TEGRA186_CLK_EXTPERIPH4 + * @} + * + * @defgroup display_clks display related clocks + * @{ + * @def TEGRA186_CLK_CEC + * @def TEGRA186_CLK_DSIC + * @def TEGRA186_CLK_DSIC_LP + * @def TEGRA186_CLK_DSID + * @def TEGRA186_CLK_DSID_LP + * @def TEGRA186_CLK_DPAUX1 + * @def TEGRA186_CLK_DPAUX + * @def TEGRA186_CLK_HDA2HDMICODEC + * @def TEGRA186_CLK_NVDISPLAY_DISP + * @def TEGRA186_CLK_NVDISPLAY_DSC + * @def TEGRA186_CLK_NVDISPLAY_P0 + * @def TEGRA186_CLK_NVDISPLAY_P1 + * @def TEGRA186_CLK_NVDISPLAY_P2 + * @def TEGRA186_CLK_NVDISPLAYHUB + * @def TEGRA186_CLK_SOR_SAFE + * @def TEGRA186_CLK_SOR0 + * @def TEGRA186_CLK_SOR0_OUT + * @def TEGRA186_CLK_SOR1 + * @def TEGRA186_CLK_SOR1_OUT + * @def TEGRA186_CLK_DSI + * @def TEGRA186_CLK_MIPI_CAL + * @def TEGRA186_CLK_DSIA_LP + * @def TEGRA186_CLK_DSIB + * @def TEGRA186_CLK_DSIB_LP + * @} + * + * @defgroup camera_clks camera related clocks + * @{ + * @def TEGRA186_CLK_NVCSI + * @def TEGRA186_CLK_NVCSILP + * @def TEGRA186_CLK_VI + * @} + * + * @defgroup audio_clks audio related clocks + * @{ + * @def TEGRA186_CLK_ACLK + * @def TEGRA186_CLK_ADSP + * @def TEGRA186_CLK_ADSPNEON + * @def TEGRA186_CLK_AHUB + * @def TEGRA186_CLK_APE + * @def TEGRA186_CLK_APB2APE + * @def TEGRA186_CLK_AUD_MCLK + * @def TEGRA186_CLK_DMIC1 + * @def TEGRA186_CLK_DMIC2 + * @def TEGRA186_CLK_DMIC3 + * @def TEGRA186_CLK_DMIC4 + * @def TEGRA186_CLK_DSPK1 + * @def TEGRA186_CLK_DSPK2 + * @def TEGRA186_CLK_HDA + * @def TEGRA186_CLK_HDA2CODEC_2X + * @def TEGRA186_CLK_I2S1 + * @def TEGRA186_CLK_I2S2 + * @def TEGRA186_CLK_I2S3 + * @def TEGRA186_CLK_I2S4 + * @def TEGRA186_CLK_I2S5 + * @def TEGRA186_CLK_I2S6 + * @def TEGRA186_CLK_MAUD + * @def TEGRA186_CLK_PLL_A_OUT0 + * @def TEGRA186_CLK_SPDIF_DOUBLER + * @def TEGRA186_CLK_SPDIF_IN + * @def TEGRA186_CLK_SPDIF_OUT + * @def TEGRA186_CLK_SYNC_DMIC1 + * @def TEGRA186_CLK_SYNC_DMIC2 + * @def TEGRA186_CLK_SYNC_DMIC3 + * @def TEGRA186_CLK_SYNC_DMIC4 + * @def TEGRA186_CLK_SYNC_DMIC5 + * @def TEGRA186_CLK_SYNC_DSPK1 + * @def TEGRA186_CLK_SYNC_DSPK2 + * @def TEGRA186_CLK_SYNC_I2S1 + * @def TEGRA186_CLK_SYNC_I2S2 + * @def TEGRA186_CLK_SYNC_I2S3 + * @def TEGRA186_CLK_SYNC_I2S4 + * @def TEGRA186_CLK_SYNC_I2S5 + * @def TEGRA186_CLK_SYNC_I2S6 + * @def TEGRA186_CLK_SYNC_SPDIF + * @} + * + * @defgroup uart_clks UART clocks + * @{ + * @def TEGRA186_CLK_AON_UART_FST_MIPI_CAL + * @def TEGRA186_CLK_UARTA + * @def TEGRA186_CLK_UARTB + * @def TEGRA186_CLK_UARTC + * @def TEGRA186_CLK_UARTD + * @def TEGRA186_CLK_UARTE + * @def TEGRA186_CLK_UARTF + * @def TEGRA186_CLK_UARTG + * @def TEGRA186_CLK_UART_FST_MIPI_CAL + * @} + * + * @defgroup i2c_clks I2C clocks + * @{ + * @def TEGRA186_CLK_AON_I2C_SLOW + * @def TEGRA186_CLK_I2C1 + * @def TEGRA186_CLK_I2C2 + * @def TEGRA186_CLK_I2C3 + * @def TEGRA186_CLK_I2C4 + * @def TEGRA186_CLK_I2C5 + * @def TEGRA186_CLK_I2C6 + * @def TEGRA186_CLK_I2C8 + * @def TEGRA186_CLK_I2C9 + * @def TEGRA186_CLK_I2C1 + * @def TEGRA186_CLK_I2C12 + * @def TEGRA186_CLK_I2C13 + * @def TEGRA186_CLK_I2C14 + * @def TEGRA186_CLK_I2C_SLOW + * @def TEGRA186_CLK_VI_I2C + * @} + * + * @defgroup spi_clks SPI clocks + * @{ + * @def TEGRA186_CLK_SPI1 + * @def TEGRA186_CLK_SPI2 + * @def TEGRA186_CLK_SPI3 + * @def TEGRA186_CLK_SPI4 + * @} + * + * @defgroup storage storage related clocks + * @{ + * @def TEGRA186_CLK_SATA + * @def TEGRA186_CLK_SATA_OOB + * @def TEGRA186_CLK_SATA_IOBIST + * @def TEGRA186_CLK_SDMMC_LEGACY_TM + * @def TEGRA186_CLK_SDMMC1 + * @def TEGRA186_CLK_SDMMC2 + * @def TEGRA186_CLK_SDMMC3 + * @def TEGRA186_CLK_SDMMC4 + * @def TEGRA186_CLK_QSPI + * @def TEGRA186_CLK_QSPI_OUT + * @def TEGRA186_CLK_UFSDEV_REF + * @def TEGRA186_CLK_UFSHC + * @} + * + * @defgroup pwm_clks PWM clocks + * @{ + * @def TEGRA186_CLK_PWM1 + * @def TEGRA186_CLK_PWM2 + * @def TEGRA186_CLK_PWM3 + * @def TEGRA186_CLK_PWM4 + * @def TEGRA186_CLK_PWM5 + * @def TEGRA186_CLK_PWM6 + * @def TEGRA186_CLK_PWM7 + * @def TEGRA186_CLK_PWM8 + * @} + * + * @defgroup plls PLLs and related clocks + * @{ + * @def TEGRA186_CLK_PLLREFE_OUT_GATED + * @def TEGRA186_CLK_PLLREFE_OUT1 + * @def TEGRA186_CLK_PLLD_OUT1 + * @def TEGRA186_CLK_PLLP_OUT0 + * @def TEGRA186_CLK_PLLP_OUT5 + * @def TEGRA186_CLK_PLLA + * @def TEGRA186_CLK_PLLE_PWRSEQ + * @def TEGRA186_CLK_PLLA_OUT1 + * @def TEGRA186_CLK_PLLREFE_REF + * @def TEGRA186_CLK_UPHY_PLL0_PWRSEQ + * @def TEGRA186_CLK_UPHY_PLL1_PWRSEQ + * @def TEGRA186_CLK_PLLREFE_PLLE_PASSTHROUGH + * @def TEGRA186_CLK_PLLREFE_PEX + * @def TEGRA186_CLK_PLLREFE_IDDQ + * @def TEGRA186_CLK_PLLC_OUT_AON + * @def TEGRA186_CLK_PLLC_OUT_ISP + * @def TEGRA186_CLK_PLLC_OUT_VE + * @def TEGRA186_CLK_PLLC4_OUT + * @def TEGRA186_CLK_PLLREFE_OUT + * @def TEGRA186_CLK_PLLREFE_PLL_REF + * @def TEGRA186_CLK_PLLE + * @def TEGRA186_CLK_PLLC + * @def TEGRA186_CLK_PLLP + * @def TEGRA186_CLK_PLLD + * @def TEGRA186_CLK_PLLD2 + * @def TEGRA186_CLK_PLLREFE_VCO + * @def TEGRA186_CLK_PLLC2 + * @def TEGRA186_CLK_PLLC3 + * @def TEGRA186_CLK_PLLDP + * @def TEGRA186_CLK_PLLC4_VCO + * @def TEGRA186_CLK_PLLA1 + * @def TEGRA186_CLK_PLLNVCSI + * @def TEGRA186_CLK_PLLDISPHUB + * @def TEGRA186_CLK_PLLD3 + * @def TEGRA186_CLK_PLLBPMPCAM + * @def TEGRA186_CLK_PLLAON + * @def TEGRA186_CLK_PLLU + * @def TEGRA186_CLK_PLLC4_VCO_DIV2 + * @def TEGRA186_CLK_PLL_REF + * @def TEGRA186_CLK_PLLREFE_OUT1_DIV5 + * @def TEGRA186_CLK_UTMIP_PLL_PWRSEQ + * @def TEGRA186_CLK_PLL_U_48M + * @def TEGRA186_CLK_PLL_U_480M + * @def TEGRA186_CLK_PLLC4_OUT0 + * @def TEGRA186_CLK_PLLC4_OUT1 + * @def TEGRA186_CLK_PLLC4_OUT2 + * @def TEGRA186_CLK_PLLC4_OUT_MUX + * @def TEGRA186_CLK_DFLLDISP_DIV + * @def TEGRA186_CLK_PLLDISPHUB_DIV + * @def TEGRA186_CLK_PLLP_DIV8 + * @} + * + * @defgroup nafll_clks NAFLL clock sources + * @{ + * @def TEGRA186_CLK_NAFLL_AXI_CBB + * @def TEGRA186_CLK_NAFLL_BCPU + * @def TEGRA186_CLK_NAFLL_BPMP + * @def TEGRA186_CLK_NAFLL_DISP + * @def TEGRA186_CLK_NAFLL_GPU + * @def TEGRA186_CLK_NAFLL_ISP + * @def TEGRA186_CLK_NAFLL_MCPU + * @def TEGRA186_CLK_NAFLL_NVDEC + * @def TEGRA186_CLK_NAFLL_NVENC + * @def TEGRA186_CLK_NAFLL_NVJPG + * @def TEGRA186_CLK_NAFLL_SCE + * @def TEGRA186_CLK_NAFLL_SE + * @def TEGRA186_CLK_NAFLL_TSEC + * @def TEGRA186_CLK_NAFLL_TSECB + * @def TEGRA186_CLK_NAFLL_VI + * @def TEGRA186_CLK_NAFLL_VIC + * @} + * + * @defgroup mphy MPHY related clocks + * @{ + * @def TEGRA186_CLK_MPHY_L0_RX_SYMB + * @def TEGRA186_CLK_MPHY_L0_RX_LS_BIT + * @def TEGRA186_CLK_MPHY_L0_TX_SYMB + * @def TEGRA186_CLK_MPHY_L0_TX_LS_3XBIT + * @def TEGRA186_CLK_MPHY_L0_RX_ANA + * @def TEGRA186_CLK_MPHY_L1_RX_ANA + * @def TEGRA186_CLK_MPHY_IOBIST + * @def TEGRA186_CLK_MPHY_TX_1MHZ_REF + * @def TEGRA186_CLK_MPHY_CORE_PLL_FIXED + * @} + * + * @defgroup eavb EAVB related clocks + * @{ + * @def TEGRA186_CLK_EQOS_AXI + * @def TEGRA186_CLK_EQOS_PTP_REF + * @def TEGRA186_CLK_EQOS_RX + * @def TEGRA186_CLK_EQOS_RX_INPUT + * @def TEGRA186_CLK_EQOS_TX + * @} + * + * @defgroup usb USB related clocks + * @{ + * @def TEGRA186_CLK_PEX_USB_PAD0_MGMT + * @def TEGRA186_CLK_PEX_USB_PAD1_MGMT + * @def TEGRA186_CLK_HSIC_TRK + * @def TEGRA186_CLK_USB2_TRK + * @def TEGRA186_CLK_USB2_HSIC_TRK + * @def TEGRA186_CLK_XUSB_CORE_SS + * @def TEGRA186_CLK_XUSB_CORE_DEV + * @def TEGRA186_CLK_XUSB_FALCON + * @def TEGRA186_CLK_XUSB_FS + * @def TEGRA186_CLK_XUSB + * @def TEGRA186_CLK_XUSB_DEV + * @def TEGRA186_CLK_XUSB_HOST + * @def TEGRA186_CLK_XUSB_SS + * @} + * + * @defgroup bigblock compute block related clocks + * @{ + * @def TEGRA186_CLK_GPCCLK + * @def TEGRA186_CLK_GPC2CLK + * @def TEGRA186_CLK_GPU + * @def TEGRA186_CLK_HOST1X + * @def TEGRA186_CLK_ISP + * @def TEGRA186_CLK_NVDEC + * @def TEGRA186_CLK_NVENC + * @def TEGRA186_CLK_NVJPG + * @def TEGRA186_CLK_SE + * @def TEGRA186_CLK_TSEC + * @def TEGRA186_CLK_TSECB + * @def TEGRA186_CLK_VIC + * @} + * + * @defgroup can CAN bus related clocks + * @{ + * @def TEGRA186_CLK_CAN1 + * @def TEGRA186_CLK_CAN1_HOST + * @def TEGRA186_CLK_CAN2 + * @def TEGRA186_CLK_CAN2_HOST + * @} + * + * @defgroup system basic system clocks + * @{ + * @def TEGRA186_CLK_ACTMON + * @def TEGRA186_CLK_AON_APB + * @def TEGRA186_CLK_AON_CPU_NIC + * @def TEGRA186_CLK_AON_NIC + * @def TEGRA186_CLK_AXI_CBB + * @def TEGRA186_CLK_BPMP_APB + * @def TEGRA186_CLK_BPMP_CPU_NIC + * @def TEGRA186_CLK_BPMP_NIC_RATE + * @def TEGRA186_CLK_CLK_M + * @def TEGRA186_CLK_EMC + * @def TEGRA186_CLK_MSS_ENCRYPT + * @def TEGRA186_CLK_SCE_APB + * @def TEGRA186_CLK_SCE_CPU_NIC + * @def TEGRA186_CLK_SCE_NIC + * @def TEGRA186_CLK_TSC + * @} + * + * @defgroup pcie_clks PCIe related clocks + * @{ + * @def TEGRA186_CLK_AFI + * @def TEGRA186_CLK_PCIE + * @def TEGRA186_CLK_PCIE2_IOBIST + * @def TEGRA186_CLK_PCIERX0 + * @def TEGRA186_CLK_PCIERX1 + * @def TEGRA186_CLK_PCIERX2 + * @def TEGRA186_CLK_PCIERX3 + * @def TEGRA186_CLK_PCIERX4 + * @} + */ + +/** @brief output of gate CLK_ENB_FUSE */ +#define TEGRA186_CLK_FUSE 0 +/** + * @brief It's not what you think + * @details output of gate CLK_ENB_GPU. This output connects to the GPU + * pwrclk. @warning: This is almost certainly not the clock you think + * it is. If you're looking for the clock of the graphics engine, see + * TEGRA186_GPCCLK + */ +#define TEGRA186_CLK_GPU 1 +/** @brief output of gate CLK_ENB_PCIE */ +#define TEGRA186_CLK_PCIE 3 +/** @brief output of the divider IPFS_CLK_DIVISOR */ +#define TEGRA186_CLK_AFI 4 +/** @brief output of gate CLK_ENB_PCIE2_IOBIST */ +#define TEGRA186_CLK_PCIE2_IOBIST 5 +/** @brief output of gate CLK_ENB_PCIERX0*/ +#define TEGRA186_CLK_PCIERX0 6 +/** @brief output of gate CLK_ENB_PCIERX1*/ +#define TEGRA186_CLK_PCIERX1 7 +/** @brief output of gate CLK_ENB_PCIERX2*/ +#define TEGRA186_CLK_PCIERX2 8 +/** @brief output of gate CLK_ENB_PCIERX3*/ +#define TEGRA186_CLK_PCIERX3 9 +/** @brief output of gate CLK_ENB_PCIERX4*/ +#define TEGRA186_CLK_PCIERX4 10 +/** @brief output branch of PLL_C for ISP, controlled by gate CLK_ENB_PLLC_OUT_ISP */ +#define TEGRA186_CLK_PLLC_OUT_ISP 11 +/** @brief output branch of PLL_C for VI, controlled by gate CLK_ENB_PLLC_OUT_VE */ +#define TEGRA186_CLK_PLLC_OUT_VE 12 +/** @brief output branch of PLL_C for AON domain, controlled by gate CLK_ENB_PLLC_OUT_AON */ +#define TEGRA186_CLK_PLLC_OUT_AON 13 +/** @brief output of gate CLK_ENB_SOR_SAFE */ +#define TEGRA186_CLK_SOR_SAFE 39 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S2 */ +#define TEGRA186_CLK_I2S2 42 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S3 */ +#define TEGRA186_CLK_I2S3 43 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPDF_IN */ +#define TEGRA186_CLK_SPDIF_IN 44 +/** @brief output of gate CLK_ENB_SPDIF_DOUBLER */ +#define TEGRA186_CLK_SPDIF_DOUBLER 45 +/** @clkdesc{spi_clks, out, mux, CLK_RST_CONTROLLER_CLK_SOURCE_SPI3} */ +#define TEGRA186_CLK_SPI3 46 +/** @clkdesc{i2c_clks, out, mux, CLK_RST_CONTROLLER_CLK_SOURCE_I2C1} */ +#define TEGRA186_CLK_I2C1 47 +/** @clkdesc{i2c_clks, out, mux, CLK_RST_CONTROLLER_CLK_SOURCE_I2C5} */ +#define TEGRA186_CLK_I2C5 48 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI1 */ +#define TEGRA186_CLK_SPI1 49 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_ISP */ +#define TEGRA186_CLK_ISP 50 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VI */ +#define TEGRA186_CLK_VI 51 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC1 */ +#define TEGRA186_CLK_SDMMC1 52 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC2 */ +#define TEGRA186_CLK_SDMMC2 53 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC4 */ +#define TEGRA186_CLK_SDMMC4 54 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTA */ +#define TEGRA186_CLK_UARTA 55 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTB */ +#define TEGRA186_CLK_UARTB 56 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X */ +#define TEGRA186_CLK_HOST1X 57 +/** + * @brief controls the EMC clock frequency. + * @details Doing a clk_set_rate on this clock will select the + * appropriate clock source, program the source rate and execute a + * specific sequence to switch to the new clock source for both memory + * controllers. This can be used to control the balance between memory + * throughput and memory controller power. + */ +#define TEGRA186_CLK_EMC 58 +/* @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH4 */ +#define TEGRA186_CLK_EXTPERIPH4 73 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI4 */ +#define TEGRA186_CLK_SPI4 74 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C3 */ +#define TEGRA186_CLK_I2C3 75 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC3 */ +#define TEGRA186_CLK_SDMMC3 76 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTD */ +#define TEGRA186_CLK_UARTD 77 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S1 */ +#define TEGRA186_CLK_I2S1 79 +/** output of gate CLK_ENB_DTV */ +#define TEGRA186_CLK_DTV 80 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TSEC */ +#define TEGRA186_CLK_TSEC 81 +/** @brief output of gate CLK_ENB_DP2 */ +#define TEGRA186_CLK_DP2 82 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S4 */ +#define TEGRA186_CLK_I2S4 84 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S5 */ +#define TEGRA186_CLK_I2S5 85 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C4 */ +#define TEGRA186_CLK_I2C4 86 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AHUB */ +#define TEGRA186_CLK_AHUB 87 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HDA2CODEC_2X */ +#define TEGRA186_CLK_HDA2CODEC_2X 88 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH1 */ +#define TEGRA186_CLK_EXTPERIPH1 89 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH2 */ +#define TEGRA186_CLK_EXTPERIPH2 90 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH3 */ +#define TEGRA186_CLK_EXTPERIPH3 91 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C_SLOW */ +#define TEGRA186_CLK_I2C_SLOW 92 +/** @brief output of the SOR1_CLK_SRC mux in CLK_RST_CONTROLLER_CLK_SOURCE_SOR1 */ +#define TEGRA186_CLK_SOR1 93 +/** @brief output of gate CLK_ENB_CEC */ +#define TEGRA186_CLK_CEC 94 +/** @brief output of gate CLK_ENB_DPAUX1 */ +#define TEGRA186_CLK_DPAUX1 95 +/** @brief output of gate CLK_ENB_DPAUX */ +#define TEGRA186_CLK_DPAUX 96 +/** @brief output of the SOR0_CLK_SRC mux in CLK_RST_CONTROLLER_CLK_SOURCE_SOR0 */ +#define TEGRA186_CLK_SOR0 97 +/** @brief output of gate CLK_ENB_HDA2HDMICODEC */ +#define TEGRA186_CLK_HDA2HDMICODEC 98 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SATA */ +#define TEGRA186_CLK_SATA 99 +/** @brief output of gate CLK_ENB_SATA_OOB */ +#define TEGRA186_CLK_SATA_OOB 100 +/** @brief output of gate CLK_ENB_SATA_IOBIST */ +#define TEGRA186_CLK_SATA_IOBIST 101 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HDA */ +#define TEGRA186_CLK_HDA 102 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SE */ +#define TEGRA186_CLK_SE 103 +/** @brief output of gate CLK_ENB_APB2APE */ +#define TEGRA186_CLK_APB2APE 104 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_APE */ +#define TEGRA186_CLK_APE 105 +/** @brief output of gate CLK_ENB_IQC1 */ +#define TEGRA186_CLK_IQC1 106 +/** @brief output of gate CLK_ENB_IQC2 */ +#define TEGRA186_CLK_IQC2 107 +/** divide by 2 version of TEGRA186_CLK_PLLREFE_VCO */ +#define TEGRA186_CLK_PLLREFE_OUT 108 +/** @brief output of gate CLK_ENB_PLLREFE_PLL_REF */ +#define TEGRA186_CLK_PLLREFE_PLL_REF 109 +/** @brief output of gate CLK_ENB_PLLC4_OUT */ +#define TEGRA186_CLK_PLLC4_OUT 110 +/** @brief output of mux xusb_core_clk_switch on page 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB 111 +/** controls xusb_dev_ce signal on page 66 and 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_DEV 112 +/** controls xusb_host_ce signal on page 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_HOST 113 +/** controls xusb_ss_ce signal on page 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_SS 114 +/** @brief output of gate CLK_ENB_DSI */ +#define TEGRA186_CLK_DSI 115 +/** @brief output of gate CLK_ENB_MIPI_CAL */ +#define TEGRA186_CLK_MIPI_CAL 116 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSIA_LP */ +#define TEGRA186_CLK_DSIA_LP 117 +/** @brief output of gate CLK_ENB_DSIB */ +#define TEGRA186_CLK_DSIB 118 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSIB_LP */ +#define TEGRA186_CLK_DSIB_LP 119 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC1 */ +#define TEGRA186_CLK_DMIC1 122 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC2 */ +#define TEGRA186_CLK_DMIC2 123 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AUD_MCLK */ +#define TEGRA186_CLK_AUD_MCLK 124 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C6 */ +#define TEGRA186_CLK_I2C6 125 +/**output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UART_FST_MIPI_CAL */ +#define TEGRA186_CLK_UART_FST_MIPI_CAL 126 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VIC */ +#define TEGRA186_CLK_VIC 127 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC_LEGACY_TM */ +#define TEGRA186_CLK_SDMMC_LEGACY_TM 128 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDEC */ +#define TEGRA186_CLK_NVDEC 129 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVJPG */ +#define TEGRA186_CLK_NVJPG 130 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVENC */ +#define TEGRA186_CLK_NVENC 131 +/** @brief output of the QSPI_CLK_SRC mux in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI */ +#define TEGRA186_CLK_QSPI 132 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VI_I2C */ +#define TEGRA186_CLK_VI_I2C 133 +/** @brief output of gate CLK_ENB_HSIC_TRK */ +#define TEGRA186_CLK_HSIC_TRK 134 +/** @brief output of gate CLK_ENB_USB2_TRK */ +#define TEGRA186_CLK_USB2_TRK 135 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_MAUD */ +#define TEGRA186_CLK_MAUD 136 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TSECB */ +#define TEGRA186_CLK_TSECB 137 +/** @brief output of gate CLK_ENB_ADSP */ +#define TEGRA186_CLK_ADSP 138 +/** @brief output of gate CLK_ENB_ADSPNEON */ +#define TEGRA186_CLK_ADSPNEON 139 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_L0_RX_LS_SYMB */ +#define TEGRA186_CLK_MPHY_L0_RX_SYMB 140 +/** @brief output of gate CLK_ENB_MPHY_L0_RX_LS_BIT */ +#define TEGRA186_CLK_MPHY_L0_RX_LS_BIT 141 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_L0_TX_LS_SYMB */ +#define TEGRA186_CLK_MPHY_L0_TX_SYMB 142 +/** @brief output of gate CLK_ENB_MPHY_L0_TX_LS_3XBIT */ +#define TEGRA186_CLK_MPHY_L0_TX_LS_3XBIT 143 +/** @brief output of gate CLK_ENB_MPHY_L0_RX_ANA */ +#define TEGRA186_CLK_MPHY_L0_RX_ANA 144 +/** @brief output of gate CLK_ENB_MPHY_L1_RX_ANA */ +#define TEGRA186_CLK_MPHY_L1_RX_ANA 145 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_IOBIST */ +#define TEGRA186_CLK_MPHY_IOBIST 146 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_TX_1MHZ_REF */ +#define TEGRA186_CLK_MPHY_TX_1MHZ_REF 147 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_CORE_PLL_FIXED */ +#define TEGRA186_CLK_MPHY_CORE_PLL_FIXED 148 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AXI_CBB */ +#define TEGRA186_CLK_AXI_CBB 149 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC3 */ +#define TEGRA186_CLK_DMIC3 150 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC4 */ +#define TEGRA186_CLK_DMIC4 151 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSPK1 */ +#define TEGRA186_CLK_DSPK1 152 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSPK2 */ +#define TEGRA186_CLK_DSPK2 153 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C6 */ +#define TEGRA186_CLK_I2S6 154 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_P0 */ +#define TEGRA186_CLK_NVDISPLAY_P0 155 +/** @brief output of the NVDISPLAY_DISP_CLK_SRC mux in CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_DISP */ +#define TEGRA186_CLK_NVDISPLAY_DISP 156 +/** @brief output of gate CLK_ENB_NVDISPLAY_DSC */ +#define TEGRA186_CLK_NVDISPLAY_DSC 157 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAYHUB */ +#define TEGRA186_CLK_NVDISPLAYHUB 158 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_P1 */ +#define TEGRA186_CLK_NVDISPLAY_P1 159 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_P2 */ +#define TEGRA186_CLK_NVDISPLAY_P2 160 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TACH */ +#define TEGRA186_CLK_TACH 166 +/** @brief output of gate CLK_ENB_EQOS */ +#define TEGRA186_CLK_EQOS_AXI 167 +/** @brief output of gate CLK_ENB_EQOS_RX */ +#define TEGRA186_CLK_EQOS_RX 168 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UFSHC_CG_SYS */ +#define TEGRA186_CLK_UFSHC 178 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UFSDEV_REF */ +#define TEGRA186_CLK_UFSDEV_REF 179 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVCSI */ +#define TEGRA186_CLK_NVCSI 180 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVCSILP */ +#define TEGRA186_CLK_NVCSILP 181 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C7 */ +#define TEGRA186_CLK_I2C7 182 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C9 */ +#define TEGRA186_CLK_I2C9 183 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C12 */ +#define TEGRA186_CLK_I2C12 184 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C13 */ +#define TEGRA186_CLK_I2C13 185 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C14 */ +#define TEGRA186_CLK_I2C14 186 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM1 */ +#define TEGRA186_CLK_PWM1 187 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM2 */ +#define TEGRA186_CLK_PWM2 188 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM3 */ +#define TEGRA186_CLK_PWM3 189 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM5 */ +#define TEGRA186_CLK_PWM5 190 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM6 */ +#define TEGRA186_CLK_PWM6 191 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM7 */ +#define TEGRA186_CLK_PWM7 192 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM8 */ +#define TEGRA186_CLK_PWM8 193 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTE */ +#define TEGRA186_CLK_UARTE 194 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTF */ +#define TEGRA186_CLK_UARTF 195 +/** @deprecated */ +#define TEGRA186_CLK_DBGAPB 196 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_BPMP_CPU_NIC */ +#define TEGRA186_CLK_BPMP_CPU_NIC 197 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_BPMP_APB */ +#define TEGRA186_CLK_BPMP_APB 199 +/** @brief output of mux controlled by TEGRA186_CLK_SOC_ACTMON */ +#define TEGRA186_CLK_ACTMON 201 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_CPU_NIC */ +#define TEGRA186_CLK_AON_CPU_NIC 208 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_CAN1 */ +#define TEGRA186_CLK_CAN1 210 +/** @brief output of gate CLK_ENB_CAN1_HOST */ +#define TEGRA186_CLK_CAN1_HOST 211 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_CAN2 */ +#define TEGRA186_CLK_CAN2 212 +/** @brief output of gate CLK_ENB_CAN2_HOST */ +#define TEGRA186_CLK_CAN2_HOST 213 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_APB */ +#define TEGRA186_CLK_AON_APB 214 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTC */ +#define TEGRA186_CLK_UARTC 215 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTG */ +#define TEGRA186_CLK_UARTG 216 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_UART_FST_MIPI_CAL */ +#define TEGRA186_CLK_AON_UART_FST_MIPI_CAL 217 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C2 */ +#define TEGRA186_CLK_I2C2 218 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C8 */ +#define TEGRA186_CLK_I2C8 219 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C10 */ +#define TEGRA186_CLK_I2C10 220 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_I2C_SLOW */ +#define TEGRA186_CLK_AON_I2C_SLOW 221 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI2 */ +#define TEGRA186_CLK_SPI2 222 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC5 */ +#define TEGRA186_CLK_DMIC5 223 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_TOUCH */ +#define TEGRA186_CLK_AON_TOUCH 224 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM4 */ +#define TEGRA186_CLK_PWM4 225 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TSC. This clock object is read only and is used for all timers in the system. */ +#define TEGRA186_CLK_TSC 226 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_MSS_ENCRYPT */ +#define TEGRA186_CLK_MSS_ENCRYPT 227 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SCE_CPU_NIC */ +#define TEGRA186_CLK_SCE_CPU_NIC 228 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SCE_APB */ +#define TEGRA186_CLK_SCE_APB 230 +/** @brief output of gate CLK_ENB_DSIC */ +#define TEGRA186_CLK_DSIC 231 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSIC_LP */ +#define TEGRA186_CLK_DSIC_LP 232 +/** @brief output of gate CLK_ENB_DSID */ +#define TEGRA186_CLK_DSID 233 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSID_LP */ +#define TEGRA186_CLK_DSID_LP 234 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_PEX_SATA_USB_RX_BYP */ +#define TEGRA186_CLK_PEX_SATA_USB_RX_BYP 236 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPDIF_OUT */ +#define TEGRA186_CLK_SPDIF_OUT 238 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_EQOS_PTP_REF_CLK_0 */ +#define TEGRA186_CLK_EQOS_PTP_REF 239 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_EQOS_TX_CLK */ +#define TEGRA186_CLK_EQOS_TX 240 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_USB2_HSIC_TRK */ +#define TEGRA186_CLK_USB2_HSIC_TRK 241 +/** @brief output of mux xusb_ss_clk_switch on page 66 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_CORE_SS 242 +/** @brief output of mux xusb_core_dev_clk_switch on page 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_CORE_DEV 243 +/** @brief output of mux xusb_core_falcon_clk_switch on page 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_FALCON 244 +/** @brief output of mux xusb_fs_clk_switch on page 66 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_FS 245 +/** @brief output of the divider CLK_RST_CONTROLLER_PLLA_OUT */ +#define TEGRA186_CLK_PLL_A_OUT0 246 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S1 */ +#define TEGRA186_CLK_SYNC_I2S1 247 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S2 */ +#define TEGRA186_CLK_SYNC_I2S2 248 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S3 */ +#define TEGRA186_CLK_SYNC_I2S3 249 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S4 */ +#define TEGRA186_CLK_SYNC_I2S4 250 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S5 */ +#define TEGRA186_CLK_SYNC_I2S5 251 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S6 */ +#define TEGRA186_CLK_SYNC_I2S6 252 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DSPK1 */ +#define TEGRA186_CLK_SYNC_DSPK1 253 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DSPK2 */ +#define TEGRA186_CLK_SYNC_DSPK2 254 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC1 */ +#define TEGRA186_CLK_SYNC_DMIC1 255 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC2 */ +#define TEGRA186_CLK_SYNC_DMIC2 256 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC3 */ +#define TEGRA186_CLK_SYNC_DMIC3 257 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC4 */ +#define TEGRA186_CLK_SYNC_DMIC4 259 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_SPDIF */ +#define TEGRA186_CLK_SYNC_SPDIF 260 +/** @brief output of gate CLK_ENB_PLLREFE_OUT */ +#define TEGRA186_CLK_PLLREFE_OUT_GATED 261 +/** @brief output of the divider PLLREFE_DIVP in CLK_RST_CONTROLLER_PLLREFE_BASE. PLLREFE has 2 outputs: + * * VCO/pdiv defined by this clock object + * * VCO/2 defined by TEGRA186_CLK_PLLREFE_OUT + */ +#define TEGRA186_CLK_PLLREFE_OUT1 262 +#define TEGRA186_CLK_PLLD_OUT1 267 +/** @brief output of the divider PLLP_DIVP in CLK_RST_CONTROLLER_PLLP_BASE */ +#define TEGRA186_CLK_PLLP_OUT0 269 +/** @brief output of the divider CLK_RST_CONTROLLER_PLLP_OUTC */ +#define TEGRA186_CLK_PLLP_OUT5 270 +/** PLL controlled by CLK_RST_CONTROLLER_PLLA_BASE for use by audio clocks */ +#define TEGRA186_CLK_PLLA 271 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_ACLK_BURST_POLICY divided by the divider controlled by ACLK_CLK_DIVISOR in CLK_RST_CONTROLLER_SUPER_ACLK_DIVIDER */ +#define TEGRA186_CLK_ACLK 273 +/** fixed 48MHz clock divided down from TEGRA186_CLK_PLL_U */ +#define TEGRA186_CLK_PLL_U_48M 274 +/** fixed 480MHz clock divided down from TEGRA186_CLK_PLL_U */ +#define TEGRA186_CLK_PLL_U_480M 275 +/** @brief output of the divider PLLC4_DIVP in CLK_RST_CONTROLLER_PLLC4_BASE. Output frequency is TEGRA186_CLK_PLLC4_VCO/PLLC4_DIVP */ +#define TEGRA186_CLK_PLLC4_OUT0 276 +/** fixed /3 divider. Output frequency of this clock is TEGRA186_CLK_PLLC4_VCO/3 */ +#define TEGRA186_CLK_PLLC4_OUT1 277 +/** fixed /5 divider. Output frequency of this clock is TEGRA186_CLK_PLLC4_VCO/5 */ +#define TEGRA186_CLK_PLLC4_OUT2 278 +/** @brief output of mux controlled by PLLC4_CLK_SEL in CLK_RST_CONTROLLER_PLLC4_MISC1 */ +#define TEGRA186_CLK_PLLC4_OUT_MUX 279 +/** @brief output of divider NVDISPLAY_DISP_CLK_DIVISOR in CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_DISP when DFLLDISP_DIV is selected in NVDISPLAY_DISP_CLK_SRC */ +#define TEGRA186_CLK_DFLLDISP_DIV 284 +/** @brief output of divider NVDISPLAY_DISP_CLK_DIVISOR in CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_DISP when PLLDISPHUB_DIV is selected in NVDISPLAY_DISP_CLK_SRC */ +#define TEGRA186_CLK_PLLDISPHUB_DIV 285 +/** fixed /8 divider which is used as the input for TEGRA186_CLK_SOR_SAFE */ +#define TEGRA186_CLK_PLLP_DIV8 286 +/** @brief output of divider CLK_RST_CONTROLLER_BPMP_NIC_RATE */ +#define TEGRA186_CLK_BPMP_NIC 287 +/** @brief output of the divider CLK_RST_CONTROLLER_PLLA1_OUT1 */ +#define TEGRA186_CLK_PLL_A_OUT1 288 +/** @deprecated */ +#define TEGRA186_CLK_GPC2CLK 289 +/** A fake clock which must be enabled during KFUSE read operations to ensure adequate VDD_CORE voltage. */ +#define TEGRA186_CLK_KFUSE 293 +/** + * @brief controls the PLLE hardware sequencer. + * @details This clock only has enable and disable methods. When the + * PLLE hw sequencer is enabled, PLLE, will be enabled or disabled by + * hw based on the control signals from the PCIe, SATA and XUSB + * clocks. When the PLLE hw sequencer is disabled, the state of PLLE + * is controlled by sw using clk_enable/clk_disable on + * TEGRA186_CLK_PLLE. + */ +#define TEGRA186_CLK_PLLE_PWRSEQ 294 +/** fixed 60MHz clock divided down from, TEGRA186_CLK_PLL_U */ +#define TEGRA186_CLK_PLLREFE_REF 295 +/** @brief output of mux controlled by SOR0_CLK_SEL0 and SOR0_CLK_SEL1 in CLK_RST_CONTROLLER_CLK_SOURCE_SOR0 */ +#define TEGRA186_CLK_SOR0_OUT 296 +/** @brief output of mux controlled by SOR1_CLK_SEL0 and SOR1_CLK_SEL1 in CLK_RST_CONTROLLER_CLK_SOURCE_SOR1 */ +#define TEGRA186_CLK_SOR1_OUT 297 +/** @brief fixed /5 divider. Output frequency of this clock is TEGRA186_CLK_PLLREFE_OUT1/5. Used as input for TEGRA186_CLK_EQOS_AXI */ +#define TEGRA186_CLK_PLLREFE_OUT1_DIV5 298 +/** @brief controls the UTMIP_PLL (aka PLLU) hardware sqeuencer */ +#define TEGRA186_CLK_UTMIP_PLL_PWRSEQ 301 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_PEX_USB_PAD_PLL0_MGMT */ +#define TEGRA186_CLK_PEX_USB_PAD0_MGMT 302 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_PEX_USB_PAD_PLL1_MGMT */ +#define TEGRA186_CLK_PEX_USB_PAD1_MGMT 303 +/** @brief controls the UPHY_PLL0 hardware sqeuencer */ +#define TEGRA186_CLK_UPHY_PLL0_PWRSEQ 304 +/** @brief controls the UPHY_PLL1 hardware sqeuencer */ +#define TEGRA186_CLK_UPHY_PLL1_PWRSEQ 305 +/** @brief control for PLLREFE_IDDQ in CLK_RST_CONTROLLER_PLLREFE_MISC so the bypass output even be used when the PLL is disabled */ +#define TEGRA186_CLK_PLLREFE_PLLE_PASSTHROUGH 306 +/** @brief output of the mux controlled by PLLREFE_SEL_CLKIN_PEX in CLK_RST_CONTROLLER_PLLREFE_MISC */ +#define TEGRA186_CLK_PLLREFE_PEX 307 +/** @brief control for PLLREFE_IDDQ in CLK_RST_CONTROLLER_PLLREFE_MISC to turn on the PLL when enabled */ +#define TEGRA186_CLK_PLLREFE_IDDQ 308 +/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI */ +#define TEGRA186_CLK_QSPI_OUT 309 +/** + * @brief GPC2CLK-div-2 + * @details fixed /2 divider. Output frequency is + * TEGRA186_CLK_GPC2CLK/2. The frequency of this clock is the + * frequency at which the GPU graphics engine runs. */ +#define TEGRA186_CLK_GPCCLK 310 +/** @brief output of divider CLK_RST_CONTROLLER_AON_NIC_RATE */ +#define TEGRA186_CLK_AON_NIC 450 +/** @brief output of divider CLK_RST_CONTROLLER_SCE_NIC_RATE */ +#define TEGRA186_CLK_SCE_NIC 451 +/** Fixed 100MHz PLL for PCIe, SATA and superspeed USB */ +#define TEGRA186_CLK_PLLE 512 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC_BASE */ +#define TEGRA186_CLK_PLLC 513 +/** Fixed 408MHz PLL for use by peripheral clocks */ +#define TEGRA186_CLK_PLLP 516 +/** @deprecated */ +#define TEGRA186_CLK_PLL_P TEGRA186_CLK_PLLP +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLD_BASE for use by DSI */ +#define TEGRA186_CLK_PLLD 518 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLD2_BASE for use by HDMI or DP */ +#define TEGRA186_CLK_PLLD2 519 +/** + * @brief PLL controlled by CLK_RST_CONTROLLER_PLLREFE_BASE. + * @details Note that this clock only controls the VCO output, before + * the post-divider. See TEGRA186_CLK_PLLREFE_OUT1 for more + * information. + */ +#define TEGRA186_CLK_PLLREFE_VCO 520 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC2_BASE */ +#define TEGRA186_CLK_PLLC2 521 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC3_BASE */ +#define TEGRA186_CLK_PLLC3 522 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLDP_BASE for use as the DP link clock */ +#define TEGRA186_CLK_PLLDP 523 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC4_BASE */ +#define TEGRA186_CLK_PLLC4_VCO 524 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLA1_BASE for use by audio clocks */ +#define TEGRA186_CLK_PLLA1 525 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLNVCSI_BASE */ +#define TEGRA186_CLK_PLLNVCSI 526 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLDISPHUB_BASE */ +#define TEGRA186_CLK_PLLDISPHUB 527 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLD3_BASE for use by HDMI or DP */ +#define TEGRA186_CLK_PLLD3 528 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLBPMPCAM_BASE */ +#define TEGRA186_CLK_PLLBPMPCAM 531 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLAON_BASE for use by IP blocks in the AON domain */ +#define TEGRA186_CLK_PLLAON 532 +/** Fixed frequency 960MHz PLL for USB and EAVB */ +#define TEGRA186_CLK_PLLU 533 +/** fixed /2 divider. Output frequency is TEGRA186_CLK_PLLC4_VCO/2 */ +#define TEGRA186_CLK_PLLC4_VCO_DIV2 535 +/** @brief NAFLL clock source for AXI_CBB */ +#define TEGRA186_CLK_NAFLL_AXI_CBB 564 +/** @brief NAFLL clock source for BPMP */ +#define TEGRA186_CLK_NAFLL_BPMP 565 +/** @brief NAFLL clock source for ISP */ +#define TEGRA186_CLK_NAFLL_ISP 566 +/** @brief NAFLL clock source for NVDEC */ +#define TEGRA186_CLK_NAFLL_NVDEC 567 +/** @brief NAFLL clock source for NVENC */ +#define TEGRA186_CLK_NAFLL_NVENC 568 +/** @brief NAFLL clock source for NVJPG */ +#define TEGRA186_CLK_NAFLL_NVJPG 569 +/** @brief NAFLL clock source for SCE */ +#define TEGRA186_CLK_NAFLL_SCE 570 +/** @brief NAFLL clock source for SE */ +#define TEGRA186_CLK_NAFLL_SE 571 +/** @brief NAFLL clock source for TSEC */ +#define TEGRA186_CLK_NAFLL_TSEC 572 +/** @brief NAFLL clock source for TSECB */ +#define TEGRA186_CLK_NAFLL_TSECB 573 +/** @brief NAFLL clock source for VI */ +#define TEGRA186_CLK_NAFLL_VI 574 +/** @brief NAFLL clock source for VIC */ +#define TEGRA186_CLK_NAFLL_VIC 575 +/** @brief NAFLL clock source for DISP */ +#define TEGRA186_CLK_NAFLL_DISP 576 +/** @brief NAFLL clock source for GPU */ +#define TEGRA186_CLK_NAFLL_GPU 577 +/** @brief NAFLL clock source for M-CPU cluster */ +#define TEGRA186_CLK_NAFLL_MCPU 578 +/** @brief NAFLL clock source for B-CPU cluster */ +#define TEGRA186_CLK_NAFLL_BCPU 579 +/** @brief input from Tegra's CLK_32K_IN pad */ +#define TEGRA186_CLK_CLK_32K 608 +/** @brief output of divider CLK_RST_CONTROLLER_CLK_M_DIVIDE */ +#define TEGRA186_CLK_CLK_M 609 +/** @brief output of divider PLL_REF_DIV in CLK_RST_CONTROLLER_OSC_CTRL */ +#define TEGRA186_CLK_PLL_REF 610 +/** @brief input from Tegra's XTAL_IN */ +#define TEGRA186_CLK_OSC 612 +/** @brief clock recovered from EAVB input */ +#define TEGRA186_CLK_EQOS_RX_INPUT 613 +/** @brief clock recovered from DTV input */ +#define TEGRA186_CLK_DTV_INPUT 614 +/** @brief SOR0 brick output which feeds into SOR0_CLK_SEL mux in CLK_RST_CONTROLLER_CLK_SOURCE_SOR0*/ +#define TEGRA186_CLK_SOR0_PAD_CLKOUT 615 +/** @brief SOR1 brick output which feeds into SOR1_CLK_SEL mux in CLK_RST_CONTROLLER_CLK_SOURCE_SOR1*/ +#define TEGRA186_CLK_SOR1_PAD_CLKOUT 616 +/** @brief clock recovered from I2S1 input */ +#define TEGRA186_CLK_I2S1_SYNC_INPUT 617 +/** @brief clock recovered from I2S2 input */ +#define TEGRA186_CLK_I2S2_SYNC_INPUT 618 +/** @brief clock recovered from I2S3 input */ +#define TEGRA186_CLK_I2S3_SYNC_INPUT 619 +/** @brief clock recovered from I2S4 input */ +#define TEGRA186_CLK_I2S4_SYNC_INPUT 620 +/** @brief clock recovered from I2S5 input */ +#define TEGRA186_CLK_I2S5_SYNC_INPUT 621 +/** @brief clock recovered from I2S6 input */ +#define TEGRA186_CLK_I2S6_SYNC_INPUT 622 +/** @brief clock recovered from SPDIFIN input */ +#define TEGRA186_CLK_SPDIFIN_SYNC_INPUT 623 + +/** + * @brief subject to change + * @details maximum clock identifier value plus one. + */ +#define TEGRA186_CLK_CLK_MAX 624 + +/** @} */ + +#endif diff --git a/include/dt-bindings/mailbox/tegra186-hsp.h b/include/dt-bindings/mailbox/tegra186-hsp.h new file mode 100644 index 0000000..f5d66e5 --- /dev/null +++ b/include/dt-bindings/mailbox/tegra186-hsp.h @@ -0,0 +1,24 @@ +/* + * This header provides constants for binding nvidia,tegra186-hsp. + */ + +#ifndef _DT_BINDINGS_MAILBOX_TEGRA186_HSP_H +#define _DT_BINDINGS_MAILBOX_TEGRA186_HSP_H + +/* + * These define the type of mailbox that is to be used (doorbell, shared + * mailbox, shared semaphore or arbitrated semaphore). + */ +#define TEGRA_HSP_MBOX_TYPE_DB 0x0 +#define TEGRA_HSP_MBOX_TYPE_SM 0x1 +#define TEGRA_HSP_MBOX_TYPE_SS 0x2 +#define TEGRA_HSP_MBOX_TYPE_AS 0x3 + +/* + * These defines represent the bit associated with the given master ID in the + * doorbell registers. + */ +#define TEGRA_HSP_DB_MASTER_CCPLEX 17 +#define TEGRA_HSP_DB_MASTER_BPMP 19 + +#endif diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h index aafa76c..d33f17c 100644 --- a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h +++ b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h @@ -89,6 +89,10 @@ #define PMA8084_GPIO_S4 2 #define PMA8084_GPIO_L6 3 +#define PM8994_GPIO_VPH 0 +#define PM8994_GPIO_S4 2 +#define PM8994_GPIO_L12 3 + /* To be used with "function" */ #define PMIC_GPIO_FUNC_NORMAL "normal" #define PMIC_GPIO_FUNC_PAIRED "paired" diff --git a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h index a15c170..2e360d8f 100644 --- a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h +++ b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h @@ -65,6 +65,12 @@ #define PMA8084_MPP_S4 2 #define PMA8084_MPP_L6 3 +#define PM8994_MPP_VPH 0 +/* Only supported for MPP_05-MPP_08 */ +#define PM8994_MPP_L19 1 +#define PM8994_MPP_S4 2 +#define PM8994_MPP_L12 3 + /* * Analog Input - Set the source for analog input. * To be used with "qcom,amux-route" property diff --git a/include/dt-bindings/power/tegra186-powergate.h b/include/dt-bindings/power/tegra186-powergate.h new file mode 100644 index 0000000..388d6e2 --- /dev/null +++ b/include/dt-bindings/power/tegra186-powergate.h @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2015-2016, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _DT_BINDINGS_POWER_TEGRA186_POWERGATE_H +#define _DT_BINDINGS_POWER_TEGRA186_POWERGATE_H + +#define TEGRA186_POWER_DOMAIN_AUD 0 +#define TEGRA186_POWER_DOMAIN_DFD 1 +#define TEGRA186_POWER_DOMAIN_DISP 2 +#define TEGRA186_POWER_DOMAIN_DISPB 3 +#define TEGRA186_POWER_DOMAIN_DISPC 4 +#define TEGRA186_POWER_DOMAIN_ISPA 5 +#define TEGRA186_POWER_DOMAIN_NVDEC 6 +#define TEGRA186_POWER_DOMAIN_NVJPG 7 +#define TEGRA186_POWER_DOMAIN_MPE 8 +#define TEGRA186_POWER_DOMAIN_PCX 9 +#define TEGRA186_POWER_DOMAIN_SAX 10 +#define TEGRA186_POWER_DOMAIN_VE 11 +#define TEGRA186_POWER_DOMAIN_VIC 12 +#define TEGRA186_POWER_DOMAIN_XUSBA 13 +#define TEGRA186_POWER_DOMAIN_XUSBB 14 +#define TEGRA186_POWER_DOMAIN_XUSBC 15 +#define TEGRA186_POWER_DOMAIN_GPU 43 +#define TEGRA186_POWER_DOMAIN_MAX 44 + +#endif diff --git a/include/dt-bindings/reset/oxsemi,ox810se.h b/include/dt-bindings/reset/oxsemi,ox810se.h new file mode 100644 index 0000000..960c26e --- /dev/null +++ b/include/dt-bindings/reset/oxsemi,ox810se.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef DT_RESET_OXSEMI_OX810SE_H +#define DT_RESET_OXSEMI_OX810SE_H + +#define RESET_ARM 0 +#define RESET_COPRO 1 +/* Reserved 2 */ +/* Reserved 3 */ +#define RESET_USBHS 4 +#define RESET_USBHSPHY 5 +#define RESET_MAC 6 +#define RESET_PCI 7 +#define RESET_DMA 8 +#define RESET_DPE 9 +#define RESET_DDR 10 +#define RESET_SATA 11 +#define RESET_SATA_LINK 12 +#define RESET_SATA_PHY 13 + /* Reserved 14 */ +#define RESET_NAND 15 +#define RESET_GPIO 16 +#define RESET_UART1 17 +#define RESET_UART2 18 +#define RESET_MISC 19 +#define RESET_I2S 20 +#define RESET_AHB_MON 21 +#define RESET_UART3 22 +#define RESET_UART4 23 +#define RESET_SGDMA 24 +/* Reserved 25 */ +/* Reserved 26 */ +/* Reserved 27 */ +/* Reserved 28 */ +/* Reserved 29 */ +/* Reserved 30 */ +#define RESET_BUS 31 + +#endif /* DT_RESET_OXSEMI_OX810SE_H */ diff --git a/include/dt-bindings/reset/oxsemi,ox820.h b/include/dt-bindings/reset/oxsemi,ox820.h new file mode 100644 index 0000000..cc6797b --- /dev/null +++ b/include/dt-bindings/reset/oxsemi,ox820.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef DT_RESET_OXSEMI_OX820_H +#define DT_RESET_OXSEMI_OX820_H + +#define RESET_SCU 0 +#define RESET_LEON 1 +#define RESET_ARM0 2 +#define RESET_ARM1 3 +#define RESET_USBHS 4 +#define RESET_USBPHYA 5 +#define RESET_MAC 6 +#define RESET_PCIEA 7 +#define RESET_SGDMA 8 +#define RESET_CIPHER 9 +#define RESET_DDR 10 +#define RESET_SATA 11 +#define RESET_SATA_LINK 12 +#define RESET_SATA_PHY 13 +#define RESET_PCIEPHY 14 +#define RESET_NAND 15 +#define RESET_GPIO 16 +#define RESET_UART1 17 +#define RESET_UART2 18 +#define RESET_MISC 19 +#define RESET_I2S 20 +#define RESET_SD 21 +#define RESET_MAC_2 22 +#define RESET_PCIEB 23 +#define RESET_VIDEO 24 +#define RESET_DDR_PHY 25 +#define RESET_USBPHYB 26 +#define RESET_USBDEV 27 +/* Reserved 29 */ +#define RESET_ARMDBG 29 +#define RESET_PLLA 30 +#define RESET_PLLB 31 + +#endif /* DT_RESET_OXSEMI_OX820_H */ diff --git a/include/dt-bindings/reset/tegra186-reset.h b/include/dt-bindings/reset/tegra186-reset.h new file mode 100644 index 0000000..8a184e3 --- /dev/null +++ b/include/dt-bindings/reset/tegra186-reset.h @@ -0,0 +1,217 @@ +/* + * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _ABI_MACH_T186_RESET_T186_H_ +#define _ABI_MACH_T186_RESET_T186_H_ + + +#define TEGRA186_RESET_ACTMON 0 +#define TEGRA186_RESET_AFI 1 +#define TEGRA186_RESET_CEC 2 +#define TEGRA186_RESET_CSITE 3 +#define TEGRA186_RESET_DP2 4 +#define TEGRA186_RESET_DPAUX 5 +#define TEGRA186_RESET_DSI 6 +#define TEGRA186_RESET_DSIB 7 +#define TEGRA186_RESET_DTV 8 +#define TEGRA186_RESET_DVFS 9 +#define TEGRA186_RESET_ENTROPY 10 +#define TEGRA186_RESET_EXTPERIPH1 11 +#define TEGRA186_RESET_EXTPERIPH2 12 +#define TEGRA186_RESET_EXTPERIPH3 13 +#define TEGRA186_RESET_GPU 14 +#define TEGRA186_RESET_HDA 15 +#define TEGRA186_RESET_HDA2CODEC_2X 16 +#define TEGRA186_RESET_HDA2HDMICODEC 17 +#define TEGRA186_RESET_HOST1X 18 +#define TEGRA186_RESET_I2C1 19 +#define TEGRA186_RESET_I2C2 20 +#define TEGRA186_RESET_I2C3 21 +#define TEGRA186_RESET_I2C4 22 +#define TEGRA186_RESET_I2C5 23 +#define TEGRA186_RESET_I2C6 24 +#define TEGRA186_RESET_ISP 25 +#define TEGRA186_RESET_KFUSE 26 +#define TEGRA186_RESET_LA 27 +#define TEGRA186_RESET_MIPI_CAL 28 +#define TEGRA186_RESET_PCIE 29 +#define TEGRA186_RESET_PCIEXCLK 30 +#define TEGRA186_RESET_SATA 31 +#define TEGRA186_RESET_SATACOLD 32 +#define TEGRA186_RESET_SDMMC1 33 +#define TEGRA186_RESET_SDMMC2 34 +#define TEGRA186_RESET_SDMMC3 35 +#define TEGRA186_RESET_SDMMC4 36 +#define TEGRA186_RESET_SE 37 +#define TEGRA186_RESET_SOC_THERM 38 +#define TEGRA186_RESET_SOR0 39 +#define TEGRA186_RESET_SPI1 40 +#define TEGRA186_RESET_SPI2 41 +#define TEGRA186_RESET_SPI3 42 +#define TEGRA186_RESET_SPI4 43 +#define TEGRA186_RESET_TMR 44 +#define TEGRA186_RESET_TRIG_SYS 45 +#define TEGRA186_RESET_TSEC 46 +#define TEGRA186_RESET_UARTA 47 +#define TEGRA186_RESET_UARTB 48 +#define TEGRA186_RESET_UARTC 49 +#define TEGRA186_RESET_UARTD 50 +#define TEGRA186_RESET_VI 51 +#define TEGRA186_RESET_VIC 52 +#define TEGRA186_RESET_XUSB_DEV 53 +#define TEGRA186_RESET_XUSB_HOST 54 +#define TEGRA186_RESET_XUSB_PADCTL 55 +#define TEGRA186_RESET_XUSB_SS 56 +#define TEGRA186_RESET_AON_APB 57 +#define TEGRA186_RESET_AXI_CBB 58 +#define TEGRA186_RESET_BPMP_APB 59 +#define TEGRA186_RESET_CAN1 60 +#define TEGRA186_RESET_CAN2 61 +#define TEGRA186_RESET_DMIC5 62 +#define TEGRA186_RESET_DSIC 63 +#define TEGRA186_RESET_DSID 64 +#define TEGRA186_RESET_EMC_EMC 65 +#define TEGRA186_RESET_EMC_MEM 66 +#define TEGRA186_RESET_EMCSB_EMC 67 +#define TEGRA186_RESET_EMCSB_MEM 68 +#define TEGRA186_RESET_EQOS 69 +#define TEGRA186_RESET_GPCDMA 70 +#define TEGRA186_RESET_GPIO_CTL0 71 +#define TEGRA186_RESET_GPIO_CTL1 72 +#define TEGRA186_RESET_GPIO_CTL2 73 +#define TEGRA186_RESET_GPIO_CTL3 74 +#define TEGRA186_RESET_GPIO_CTL4 75 +#define TEGRA186_RESET_GPIO_CTL5 76 +#define TEGRA186_RESET_I2C10 77 +#define TEGRA186_RESET_I2C12 78 +#define TEGRA186_RESET_I2C13 79 +#define TEGRA186_RESET_I2C14 80 +#define TEGRA186_RESET_I2C7 81 +#define TEGRA186_RESET_I2C8 82 +#define TEGRA186_RESET_I2C9 83 +#define TEGRA186_RESET_JTAG2AXI 84 +#define TEGRA186_RESET_MPHY_IOBIST 85 +#define TEGRA186_RESET_MPHY_L0_RX 86 +#define TEGRA186_RESET_MPHY_L0_TX 87 +#define TEGRA186_RESET_NVCSI 88 +#define TEGRA186_RESET_NVDISPLAY0_HEAD0 89 +#define TEGRA186_RESET_NVDISPLAY0_HEAD1 90 +#define TEGRA186_RESET_NVDISPLAY0_HEAD2 91 +#define TEGRA186_RESET_NVDISPLAY0_MISC 92 +#define TEGRA186_RESET_NVDISPLAY0_WGRP0 93 +#define TEGRA186_RESET_NVDISPLAY0_WGRP1 94 +#define TEGRA186_RESET_NVDISPLAY0_WGRP2 95 +#define TEGRA186_RESET_NVDISPLAY0_WGRP3 96 +#define TEGRA186_RESET_NVDISPLAY0_WGRP4 97 +#define TEGRA186_RESET_NVDISPLAY0_WGRP5 98 +#define TEGRA186_RESET_PWM1 99 +#define TEGRA186_RESET_PWM2 100 +#define TEGRA186_RESET_PWM3 101 +#define TEGRA186_RESET_PWM4 102 +#define TEGRA186_RESET_PWM5 103 +#define TEGRA186_RESET_PWM6 104 +#define TEGRA186_RESET_PWM7 105 +#define TEGRA186_RESET_PWM8 106 +#define TEGRA186_RESET_SCE_APB 107 +#define TEGRA186_RESET_SOR1 108 +#define TEGRA186_RESET_TACH 109 +#define TEGRA186_RESET_TSC 110 +#define TEGRA186_RESET_UARTF 111 +#define TEGRA186_RESET_UARTG 112 +#define TEGRA186_RESET_UFSHC 113 +#define TEGRA186_RESET_UFSHC_AXI_M 114 +#define TEGRA186_RESET_UPHY 115 +#define TEGRA186_RESET_ADSP 116 +#define TEGRA186_RESET_ADSPDBG 117 +#define TEGRA186_RESET_ADSPINTF 118 +#define TEGRA186_RESET_ADSPNEON 119 +#define TEGRA186_RESET_ADSPPERIPH 120 +#define TEGRA186_RESET_ADSPSCU 121 +#define TEGRA186_RESET_ADSPWDT 122 +#define TEGRA186_RESET_APE 123 +#define TEGRA186_RESET_DPAUX1 124 +#define TEGRA186_RESET_NVDEC 125 +#define TEGRA186_RESET_NVENC 126 +#define TEGRA186_RESET_NVJPG 127 +#define TEGRA186_RESET_PEX_USB_UPHY 128 +#define TEGRA186_RESET_QSPI 129 +#define TEGRA186_RESET_TSECB 130 +#define TEGRA186_RESET_VI_I2C 131 +#define TEGRA186_RESET_UARTE 132 +#define TEGRA186_RESET_TOP_GTE 133 +#define TEGRA186_RESET_SHSP 134 +#define TEGRA186_RESET_PEX_USB_UPHY_L5 135 +#define TEGRA186_RESET_PEX_USB_UPHY_L4 136 +#define TEGRA186_RESET_PEX_USB_UPHY_L3 137 +#define TEGRA186_RESET_PEX_USB_UPHY_L2 138 +#define TEGRA186_RESET_PEX_USB_UPHY_L1 139 +#define TEGRA186_RESET_PEX_USB_UPHY_L0 140 +#define TEGRA186_RESET_PEX_USB_UPHY_PLL1 141 +#define TEGRA186_RESET_PEX_USB_UPHY_PLL0 142 +#define TEGRA186_RESET_TSCTNVI 143 +#define TEGRA186_RESET_EXTPERIPH4 144 +#define TEGRA186_RESET_DSIPADCTL 145 +#define TEGRA186_RESET_AUD_MCLK 146 +#define TEGRA186_RESET_MPHY_CLK_CTL 147 +#define TEGRA186_RESET_MPHY_L1_RX 148 +#define TEGRA186_RESET_MPHY_L1_TX 149 +#define TEGRA186_RESET_UFSHC_LP 150 +#define TEGRA186_RESET_BPMP_NIC 151 +#define TEGRA186_RESET_BPMP_NSYSPORESET 152 +#define TEGRA186_RESET_BPMP_NRESET 153 +#define TEGRA186_RESET_BPMP_DBGRESETN 154 +#define TEGRA186_RESET_BPMP_PRESETDBGN 155 +#define TEGRA186_RESET_BPMP_PM 156 +#define TEGRA186_RESET_BPMP_CVC 157 +#define TEGRA186_RESET_BPMP_DMA 158 +#define TEGRA186_RESET_BPMP_HSP 159 +#define TEGRA186_RESET_TSCTNBPMP 160 +#define TEGRA186_RESET_BPMP_TKE 161 +#define TEGRA186_RESET_BPMP_GTE 162 +#define TEGRA186_RESET_BPMP_PM_ACTMON 163 +#define TEGRA186_RESET_AON_NIC 164 +#define TEGRA186_RESET_AON_NSYSPORESET 165 +#define TEGRA186_RESET_AON_NRESET 166 +#define TEGRA186_RESET_AON_DBGRESETN 167 +#define TEGRA186_RESET_AON_PRESETDBGN 168 +#define TEGRA186_RESET_AON_ACTMON 169 +#define TEGRA186_RESET_AOPM 170 +#define TEGRA186_RESET_AOVC 171 +#define TEGRA186_RESET_AON_DMA 172 +#define TEGRA186_RESET_AON_GPIO 173 +#define TEGRA186_RESET_AON_HSP 174 +#define TEGRA186_RESET_TSCTNAON 175 +#define TEGRA186_RESET_AON_TKE 176 +#define TEGRA186_RESET_AON_GTE 177 +#define TEGRA186_RESET_SCE_NIC 178 +#define TEGRA186_RESET_SCE_NSYSPORESET 179 +#define TEGRA186_RESET_SCE_NRESET 180 +#define TEGRA186_RESET_SCE_DBGRESETN 181 +#define TEGRA186_RESET_SCE_PRESETDBGN 182 +#define TEGRA186_RESET_SCE_ACTMON 183 +#define TEGRA186_RESET_SCE_PM 184 +#define TEGRA186_RESET_SCE_DMA 185 +#define TEGRA186_RESET_SCE_HSP 186 +#define TEGRA186_RESET_TSCTNSCE 187 +#define TEGRA186_RESET_SCE_TKE 188 +#define TEGRA186_RESET_SCE_GTE 189 +#define TEGRA186_RESET_SCE_CFG 190 +#define TEGRA186_RESET_ADSP_ALL 191 +/** @brief controls the power up/down sequence of UFSHC PSW partition. Controls LP_PWR_READY, LP_ISOL_EN, and LP_RESET_N signals */ +#define TEGRA186_RESET_UFSHC_LP_SEQ 192 +#define TEGRA186_RESET_SIZE 193 + +#endif diff --git a/include/linux/soc/qcom/wcnss_ctrl.h b/include/linux/soc/qcom/wcnss_ctrl.h index a37bc55..eab6497 100644 --- a/include/linux/soc/qcom/wcnss_ctrl.h +++ b/include/linux/soc/qcom/wcnss_ctrl.h @@ -3,6 +3,19 @@ #include <linux/soc/qcom/smd.h> +#if IS_ENABLED(CONFIG_QCOM_WCNSS_CTRL) + struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb); +#else + +static inline struct qcom_smd_channel* +qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb) +{ + WARN_ON(1); + return ERR_PTR(-ENXIO); +} + +#endif + #endif diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h new file mode 100644 index 0000000..0ccbc13 --- /dev/null +++ b/include/linux/soc/ti/ti_sci_protocol.h @@ -0,0 +1,249 @@ +/* + * Texas Instruments System Control Interface Protocol + * + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Nishanth Menon + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __TISCI_PROTOCOL_H +#define __TISCI_PROTOCOL_H + +/** + * struct ti_sci_version_info - version information structure + * @abi_major: Major ABI version. Change here implies risk of backward + * compatibility break. + * @abi_minor: Minor ABI version. Change here implies new feature addition, + * or compatible change in ABI. + * @firmware_revision: Firmware revision (not usually used). + * @firmware_description: Firmware description (not usually used). + */ +struct ti_sci_version_info { + u8 abi_major; + u8 abi_minor; + u16 firmware_revision; + char firmware_description[32]; +}; + +struct ti_sci_handle; + +/** + * struct ti_sci_core_ops - SoC Core Operations + * @reboot_device: Reboot the SoC + * Returns 0 for successful request(ideally should never return), + * else returns corresponding error value. + */ +struct ti_sci_core_ops { + int (*reboot_device)(const struct ti_sci_handle *handle); +}; + +/** + * struct ti_sci_dev_ops - Device control operations + * @get_device: Command to request for device managed by TISCI + * Returns 0 for successful exclusive request, else returns + * corresponding error message. + * @idle_device: Command to idle a device managed by TISCI + * Returns 0 for successful exclusive request, else returns + * corresponding error message. + * @put_device: Command to release a device managed by TISCI + * Returns 0 for successful release, else returns corresponding + * error message. + * @is_valid: Check if the device ID is a valid ID. + * Returns 0 if the ID is valid, else returns corresponding error. + * @get_context_loss_count: Command to retrieve context loss counter - this + * increments every time the device looses context. Overflow + * is possible. + * - count: pointer to u32 which will retrieve counter + * Returns 0 for successful information request and count has + * proper data, else returns corresponding error message. + * @is_idle: Reports back about device idle state + * - req_state: Returns requested idle state + * Returns 0 for successful information request and req_state and + * current_state has proper data, else returns corresponding error + * message. + * @is_stop: Reports back about device stop state + * - req_state: Returns requested stop state + * - current_state: Returns current stop state + * Returns 0 for successful information request and req_state and + * current_state has proper data, else returns corresponding error + * message. + * @is_on: Reports back about device ON(or active) state + * - req_state: Returns requested ON state + * - current_state: Returns current ON state + * Returns 0 for successful information request and req_state and + * current_state has proper data, else returns corresponding error + * message. + * @is_transitioning: Reports back if the device is in the middle of transition + * of state. + * -current_state: Returns 'true' if currently transitioning. + * @set_device_resets: Command to configure resets for device managed by TISCI. + * -reset_state: Device specific reset bit field + * Returns 0 for successful request, else returns + * corresponding error message. + * @get_device_resets: Command to read state of resets for device managed + * by TISCI. + * -reset_state: pointer to u32 which will retrieve resets + * Returns 0 for successful request, else returns + * corresponding error message. + * + * NOTE: for all these functions, the following parameters are generic in + * nature: + * -handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * -id: Device Identifier + * + * Request for the device - NOTE: the client MUST maintain integrity of + * usage count by balancing get_device with put_device. No refcounting is + * managed by driver for that purpose. + */ +struct ti_sci_dev_ops { + int (*get_device)(const struct ti_sci_handle *handle, u32 id); + int (*idle_device)(const struct ti_sci_handle *handle, u32 id); + int (*put_device)(const struct ti_sci_handle *handle, u32 id); + int (*is_valid)(const struct ti_sci_handle *handle, u32 id); + int (*get_context_loss_count)(const struct ti_sci_handle *handle, + u32 id, u32 *count); + int (*is_idle)(const struct ti_sci_handle *handle, u32 id, + bool *requested_state); + int (*is_stop)(const struct ti_sci_handle *handle, u32 id, + bool *req_state, bool *current_state); + int (*is_on)(const struct ti_sci_handle *handle, u32 id, + bool *req_state, bool *current_state); + int (*is_transitioning)(const struct ti_sci_handle *handle, u32 id, + bool *current_state); + int (*set_device_resets)(const struct ti_sci_handle *handle, u32 id, + u32 reset_state); + int (*get_device_resets)(const struct ti_sci_handle *handle, u32 id, + u32 *reset_state); +}; + +/** + * struct ti_sci_clk_ops - Clock control operations + * @get_clock: Request for activation of clock and manage by processor + * - needs_ssc: 'true' if Spread Spectrum clock is desired. + * - can_change_freq: 'true' if frequency change is desired. + * - enable_input_term: 'true' if input termination is desired. + * @idle_clock: Request for Idling a clock managed by processor + * @put_clock: Release the clock to be auto managed by TISCI + * @is_auto: Is the clock being auto managed + * - req_state: state indicating if the clock is auto managed + * @is_on: Is the clock ON + * - req_state: if the clock is requested to be forced ON + * - current_state: if the clock is currently ON + * @is_off: Is the clock OFF + * - req_state: if the clock is requested to be forced OFF + * - current_state: if the clock is currently Gated + * @set_parent: Set the clock source of a specific device clock + * - parent_id: Parent clock identifier to set. + * @get_parent: Get the current clock source of a specific device clock + * - parent_id: Parent clock identifier which is the parent. + * @get_num_parents: Get the number of parents of the current clock source + * - num_parents: returns the number of parent clocks. + * @get_best_match_freq: Find a best matching frequency for a frequency + * range. + * - match_freq: Best matching frequency in Hz. + * @set_freq: Set the Clock frequency + * @get_freq: Get the Clock frequency + * - current_freq: Frequency in Hz that the clock is at. + * + * NOTE: for all these functions, the following parameters are generic in + * nature: + * -handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * -did: Device identifier this request is for + * -cid: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * -min_freq: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * -target_freq: The target clock frequency in Hz. A frequency will be + * processed as close to this target frequency as possible. + * -max_freq: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * + * Request for the clock - NOTE: the client MUST maintain integrity of + * usage count by balancing get_clock with put_clock. No refcounting is + * managed by driver for that purpose. + */ +struct ti_sci_clk_ops { + int (*get_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid, + bool needs_ssc, bool can_change_freq, + bool enable_input_term); + int (*idle_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid); + int (*put_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid); + int (*is_auto)(const struct ti_sci_handle *handle, u32 did, u8 cid, + bool *req_state); + int (*is_on)(const struct ti_sci_handle *handle, u32 did, u8 cid, + bool *req_state, bool *current_state); + int (*is_off)(const struct ti_sci_handle *handle, u32 did, u8 cid, + bool *req_state, bool *current_state); + int (*set_parent)(const struct ti_sci_handle *handle, u32 did, u8 cid, + u8 parent_id); + int (*get_parent)(const struct ti_sci_handle *handle, u32 did, u8 cid, + u8 *parent_id); + int (*get_num_parents)(const struct ti_sci_handle *handle, u32 did, + u8 cid, u8 *num_parents); + int (*get_best_match_freq)(const struct ti_sci_handle *handle, u32 did, + u8 cid, u64 min_freq, u64 target_freq, + u64 max_freq, u64 *match_freq); + int (*set_freq)(const struct ti_sci_handle *handle, u32 did, u8 cid, + u64 min_freq, u64 target_freq, u64 max_freq); + int (*get_freq)(const struct ti_sci_handle *handle, u32 did, u8 cid, + u64 *current_freq); +}; + +/** + * struct ti_sci_ops - Function support for TI SCI + * @dev_ops: Device specific operations + * @clk_ops: Clock specific operations + */ +struct ti_sci_ops { + struct ti_sci_core_ops core_ops; + struct ti_sci_dev_ops dev_ops; + struct ti_sci_clk_ops clk_ops; +}; + +/** + * struct ti_sci_handle - Handle returned to TI SCI clients for usage. + * @version: structure containing version information + * @ops: operations that are made available to TI SCI clients + */ +struct ti_sci_handle { + struct ti_sci_version_info version; + struct ti_sci_ops ops; +}; + +#if IS_ENABLED(CONFIG_TI_SCI_PROTOCOL) +const struct ti_sci_handle *ti_sci_get_handle(struct device *dev); +int ti_sci_put_handle(const struct ti_sci_handle *handle); +const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev); + +#else /* CONFIG_TI_SCI_PROTOCOL */ + +static inline const struct ti_sci_handle *ti_sci_get_handle(struct device *dev) +{ + return ERR_PTR(-EINVAL); +} + +static inline int ti_sci_put_handle(const struct ti_sci_handle *handle) +{ + return -EINVAL; +} + +static inline +const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev) +{ + return ERR_PTR(-EINVAL); +} + +#endif /* CONFIG_TI_SCI_PROTOCOL */ + +#endif /* __TISCI_PROTOCOL_H */ diff --git a/include/soc/at91/atmel-secumod.h b/include/soc/at91/atmel-secumod.h new file mode 100644 index 0000000..22cd5d5 --- /dev/null +++ b/include/soc/at91/atmel-secumod.h @@ -0,0 +1,19 @@ +/* + * Atmel Security Module register offsets and bit definitions. + * + * Copyright (C) 2016 Atmel + * + * Author: Alexandre Belloni <alexandre.belloni@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _LINUX_SOC_AT91_ATMEL_SECUMOD_H +#define _LINUX_SOC_AT91_ATMEL_SECUMOD_H + +#define AT91_SECUMOD_RAMRDY 0x14 +#define AT91_SECUMOD_RAMRDY_READY BIT(0) + +#endif /* _LINUX_SOC_AT91_ATMEL_SECUMOD_H */ diff --git a/include/soc/tegra/bpmp-abi.h b/include/soc/tegra/bpmp-abi.h new file mode 100644 index 0000000..0aaef59 --- /dev/null +++ b/include/soc/tegra/bpmp-abi.h @@ -0,0 +1,1601 @@ +/* + * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _ABI_BPMP_ABI_H_ +#define _ABI_BPMP_ABI_H_ + +#ifdef LK +#include <stdint.h> +#endif + +#ifndef __ABI_PACKED +#define __ABI_PACKED __attribute__((packed)) +#endif + +#ifdef NO_GCC_EXTENSIONS +#define EMPTY char empty; +#define EMPTY_ARRAY 1 +#else +#define EMPTY +#define EMPTY_ARRAY 0 +#endif + +#ifndef __UNION_ANON +#define __UNION_ANON +#endif +/** + * @file + */ + + +/** + * @defgroup MRQ MRQ Messages + * @brief Messages sent to/from BPMP via IPC + * @{ + * @defgroup MRQ_Format Message Format + * @defgroup MRQ_Codes Message Request (MRQ) Codes + * @defgroup MRQ_Payloads Message Payloads + * @defgroup Error_Codes Error Codes + * @} + */ + +/** + * @addtogroup MRQ_Format Message Format + * @{ + * The CPU requests the BPMP to perform a particular service by + * sending it an IVC frame containing a single MRQ message. An MRQ + * message consists of a @ref mrq_request followed by a payload whose + * format depends on mrq_request::mrq. + * + * The BPMP processes the data and replies with an IVC frame (on the + * same IVC channel) containing and MRQ response. An MRQ response + * consists of a @ref mrq_response followed by a payload whose format + * depends on the associated mrq_request::mrq. + * + * A well-defined subset of the MRQ messages that the CPU sends to the + * BPMP can lead to BPMP eventually sending an MRQ message to the + * CPU. For example, when the CPU uses an #MRQ_THERMAL message to set + * a thermal trip point, the BPMP may eventually send a single + * #MRQ_THERMAL message of its own to the CPU indicating that the trip + * point has been crossed. + * @} + */ + +/** + * @ingroup MRQ_Format + * @brief header for an MRQ message + * + * Provides the MRQ number for the MRQ message: #mrq. The remainder of + * the MRQ message is a payload (immediately following the + * mrq_request) whose format depends on mrq. + * + * @todo document the flags + */ +struct mrq_request { + /** @brief MRQ number of the request */ + uint32_t mrq; + /** @brief flags for the request */ + uint32_t flags; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Format + * @brief header for an MRQ response + * + * Provides an error code for the associated MRQ message. The + * remainder of the MRQ response is a payload (immediately following + * the mrq_response) whose format depends on the associated + * mrq_request::mrq + * + * @todo document the flags + */ +struct mrq_response { + /** @brief error code for the MRQ request itself */ + int32_t err; + /** @brief flags for the response */ + uint32_t flags; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Format + * Minimum needed size for an IPC message buffer + */ +#define MSG_MIN_SZ 128 +/** + * @ingroup MRQ_Format + * Minimum size guaranteed for data in an IPC message buffer + */ +#define MSG_DATA_MIN_SZ 120 + +/** + * @ingroup MRQ_Codes + * @name Legal MRQ codes + * These are the legal values for mrq_request::mrq + * @{ + */ + +#define MRQ_PING 0 +#define MRQ_QUERY_TAG 1 +#define MRQ_MODULE_LOAD 4 +#define MRQ_MODULE_UNLOAD 5 +#define MRQ_TRACE_MODIFY 7 +#define MRQ_WRITE_TRACE 8 +#define MRQ_THREADED_PING 9 +#define MRQ_MODULE_MAIL 11 +#define MRQ_DEBUGFS 19 +#define MRQ_RESET 20 +#define MRQ_I2C 21 +#define MRQ_CLK 22 +#define MRQ_QUERY_ABI 23 +#define MRQ_PG_READ_STATE 25 +#define MRQ_PG_UPDATE_STATE 26 +#define MRQ_THERMAL 27 +#define MRQ_CPU_VHINT 28 +#define MRQ_ABI_RATCHET 29 +#define MRQ_EMC_DVFS_LATENCY 31 +#define MRQ_TRACE_ITER 64 + +/** @} */ + +/** + * @ingroup MRQ_Codes + * @brief Maximum MRQ code to be sent by CPU software to + * BPMP. Subject to change in future + */ +#define MAX_CPU_MRQ_ID 64 + +/** + * @addtogroup MRQ_Payloads Message Payloads + * @{ + * @defgroup Ping + * @defgroup Query_Tag Query Tag + * @defgroup Module Loadable Modules + * @defgroup Trace + * @defgroup Debugfs + * @defgroup Reset + * @defgroup I2C + * @defgroup Clocks + * @defgroup ABI_info ABI Info + * @defgroup MC_Flush MC Flush + * @defgroup Powergating + * @defgroup Thermal + * @defgroup Vhint CPU Voltage hint + * @defgroup MRQ_Deprecated Deprecated MRQ messages + * @defgroup EMC + * @} + */ + + +/** + * @ingroup MRQ_Codes + * @def MRQ_PING + * @brief A simple ping + * + * * Platforms: All + * * Initiators: Any + * * Targets: Any + * * Request Payload: @ref mrq_ping_request + * * Response Payload: @ref mrq_ping_response + * + * @ingroup MRQ_Codes + * @def MRQ_THREADED_PING + * @brief A deeper ping + * + * * Platforms: All + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_ping_request + * * Response Payload: @ref mrq_ping_response + * + * Behavior is equivalent to a simple #MRQ_PING except that BPMP + * responds from a thread context (providing a slightly more robust + * sign of life). + * + */ + +/** + * @ingroup Ping + * @brief request with #MRQ_PING + * + * Used by the sender of an #MRQ_PING message to request a pong from + * recipient. The response from the recipient is computed based on + * #challenge. + */ +struct mrq_ping_request { +/** @brief arbitrarily chosen value */ + uint32_t challenge; +} __ABI_PACKED; + +/** + * @ingroup Ping + * @brief response to #MRQ_PING + * + * Sent in response to an #MRQ_PING message. #reply should be the + * mrq_ping_request challenge left shifted by 1 with the carry-bit + * dropped. + * + */ +struct mrq_ping_response { + /** @brief response to the MRQ_PING challege */ + uint32_t reply; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_QUERY_TAG + * @brief Query BPMP firmware's tag (i.e. version information) + * + * * Platforms: All + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: @ref mrq_query_tag_request + * * Response Payload: N/A + * + */ + +/** + * @ingroup Query_Tag + * @brief request with #MRQ_QUERY_TAG + * + * Used by #MRQ_QUERY_TAG call to ask BPMP to fill in the memory + * pointed by #addr with BPMP firmware header. + * + * The sender is reponsible for ensuring that #addr is mapped in to + * the recipient's address map. + */ +struct mrq_query_tag_request { + /** @brief base address to store the firmware header */ + uint32_t addr; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_MODULE_LOAD + * @brief dynamically load a BPMP code module + * + * * Platforms: All + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: @ref mrq_module_load_request + * * Response Payload: @ref mrq_module_load_response + * + * @note This MRQ is disabled on production systems + * + */ + +/** + * @ingroup Module + * @brief request with #MRQ_MODULE_LOAD + * + * Used by #MRQ_MODULE_LOAD calls to ask the recipient to dynamically + * load the code located at #phys_addr and having size #size + * bytes. #phys_addr is treated as a void pointer. + * + * The recipient copies the code from #phys_addr to locally allocated + * memory prior to responding to this message. + * + * @todo document the module header format + * + * The sender is responsible for ensuring that the code is mapped in + * the recipient's address map. + * + */ +struct mrq_module_load_request { + /** @brief base address of the code to load. Treated as (void *) */ + uint32_t phys_addr; /* (void *) */ + /** @brief size in bytes of code to load */ + uint32_t size; +} __ABI_PACKED; + +/** + * @ingroup Module + * @brief response to #MRQ_MODULE_LOAD + * + * @todo document mrq_response::err + */ +struct mrq_module_load_response { + /** @brief handle to the loaded module */ + uint32_t base; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_MODULE_UNLOAD + * @brief unload a previously loaded code module + * + * * Platforms: All + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: @ref mrq_module_unload_request + * * Response Payload: N/A + * + * @note This MRQ is disabled on production systems + */ + +/** + * @ingroup Module + * @brief request with #MRQ_MODULE_UNLOAD + * + * Used by #MRQ_MODULE_UNLOAD calls to request that a previously loaded + * module be unloaded. + */ +struct mrq_module_unload_request { + /** @brief handle of the module to unload */ + uint32_t base; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_TRACE_MODIFY + * @brief modify the set of enabled trace events + * + * * Platforms: All + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: @ref mrq_trace_modify_request + * * Response Payload: @ref mrq_trace_modify_response + * + * @note This MRQ is disabled on production systems + */ + +/** + * @ingroup Trace + * @brief request with #MRQ_TRACE_MODIFY + * + * Used by %MRQ_TRACE_MODIFY calls to enable or disable specify trace + * events. #set takes precedence for any bit set in both #set and + * #clr. + */ +struct mrq_trace_modify_request { + /** @brief bit mask of trace events to disable */ + uint32_t clr; + /** @brief bit mask of trace events to enable */ + uint32_t set; +} __ABI_PACKED; + +/** + * @ingroup Trace + * @brief response to #MRQ_TRACE_MODIFY + * + * Sent in repsonse to an #MRQ_TRACE_MODIFY message. #mask reflects the + * state of which events are enabled after the recipient acted on the + * message. + * + */ +struct mrq_trace_modify_response { + /** @brief bit mask of trace event enable states */ + uint32_t mask; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_WRITE_TRACE + * @brief Write trace data to a buffer + * + * * Platforms: All + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: @ref mrq_write_trace_request + * * Response Payload: @ref mrq_write_trace_response + * + * mrq_response::err depends on the @ref mrq_write_trace_request field + * values. err is -#BPMP_EINVAL if size is zero or area is NULL or + * area is in an illegal range. A positive value for err indicates the + * number of bytes written to area. + * + * @note This MRQ is disabled on production systems + */ + +/** + * @ingroup Trace + * @brief request with #MRQ_WRITE_TRACE + * + * Used by MRQ_WRITE_TRACE calls to ask the recipient to copy trace + * data from the recipient's local buffer to the output buffer. #area + * is treated as a byte-aligned pointer in the recipient's address + * space. + * + * The sender is responsible for ensuring that the output + * buffer is mapped in the recipient's address map. The recipient is + * responsible for protecting its own code and data from accidental + * overwrites. + */ +struct mrq_write_trace_request { + /** @brief base address of output buffer */ + uint32_t area; + /** @brief size in bytes of the output buffer */ + uint32_t size; +} __ABI_PACKED; + +/** + * @ingroup Trace + * @brief response to #MRQ_WRITE_TRACE + * + * Once this response is sent, the respondent will not access the + * output buffer further. + */ +struct mrq_write_trace_response { + /** + * @brief flag whether more data remains in local buffer + * + * Value is 1 if the entire local trace buffer has been + * drained to the outputbuffer. Value is 0 otherwise. + */ + uint32_t eof; +} __ABI_PACKED; + +/** @private */ +struct mrq_threaded_ping_request { + uint32_t challenge; +} __ABI_PACKED; + +/** @private */ +struct mrq_threaded_ping_response { + uint32_t reply; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_MODULE_MAIL + * @brief send a message to a loadable module + * + * * Platforms: All + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_module_mail_request + * * Response Payload: @ref mrq_module_mail_response + * + * @note This MRQ is disabled on production systems + */ + +/** + * @ingroup Module + * @brief request with #MRQ_MODULE_MAIL + */ +struct mrq_module_mail_request { + /** @brief handle to the previously loaded module */ + uint32_t base; + /** @brief module-specific mail payload + * + * The length of data[ ] is unknown to the BPMP core firmware + * but it is limited to the size of an IPC message. + */ + uint8_t data[EMPTY_ARRAY]; +} __ABI_PACKED; + +/** + * @ingroup Module + * @brief response to #MRQ_MODULE_MAIL + */ +struct mrq_module_mail_response { + /** @brief module-specific mail payload + * + * The length of data[ ] is unknown to the BPMP core firmware + * but it is limited to the size of an IPC message. + */ + uint8_t data[EMPTY_ARRAY]; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_DEBUGFS + * @brief Interact with BPMP's debugfs file nodes + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_debugfs_request + * * Response Payload: @ref mrq_debugfs_response + */ + +/** + * @addtogroup Debugfs + * @{ + * + * The BPMP firmware implements a pseudo-filesystem called + * debugfs. Any driver within the firmware may register with debugfs + * to expose an arbitrary set of "files" in the filesystem. When + * software on the CPU writes to a debugfs file, debugfs passes the + * written data to a callback provided by the driver. When software on + * the CPU reads a debugfs file, debugfs queries the driver for the + * data to return to the CPU. The intention of the debugfs filesystem + * is to provide information useful for debugging the system at + * runtime. + * + * @note The files exposed via debugfs are not part of the + * BPMP firmware's ABI. debugfs files may be added or removed in any + * given version of the firmware. Typically the semantics of a debugfs + * file are consistent from version to version but even that is not + * guaranteed. + * + * @} + */ +/** @ingroup Debugfs */ +enum mrq_debugfs_commands { + CMD_DEBUGFS_READ = 1, + CMD_DEBUGFS_WRITE = 2, + CMD_DEBUGFS_DUMPDIR = 3, + CMD_DEBUGFS_MAX +}; + +/** + * @ingroup Debugfs + * @brief parameters for CMD_DEBUGFS_READ/WRITE command + */ +struct cmd_debugfs_fileop_request { + /** @brief physical address pointing at filename */ + uint32_t fnameaddr; + /** @brief length in bytes of filename buffer */ + uint32_t fnamelen; + /** @brief physical address pointing to data buffer */ + uint32_t dataaddr; + /** @brief length in bytes of data buffer */ + uint32_t datalen; +} __ABI_PACKED; + +/** + * @ingroup Debugfs + * @brief parameters for CMD_DEBUGFS_READ/WRITE command + */ +struct cmd_debugfs_dumpdir_request { + /** @brief physical address pointing to data buffer */ + uint32_t dataaddr; + /** @brief length in bytes of data buffer */ + uint32_t datalen; +} __ABI_PACKED; + +/** + * @ingroup Debugfs + * @brief response data for CMD_DEBUGFS_READ/WRITE command + */ +struct cmd_debugfs_fileop_response { + /** @brief always 0 */ + uint32_t reserved; + /** @brief number of bytes read from or written to data buffer */ + uint32_t nbytes; +} __ABI_PACKED; + +/** + * @ingroup Debugfs + * @brief response data for CMD_DEBUGFS_DUMPDIR command + */ +struct cmd_debugfs_dumpdir_response { + /** @brief always 0 */ + uint32_t reserved; + /** @brief number of bytes read from or written to data buffer */ + uint32_t nbytes; +} __ABI_PACKED; + +/** + * @ingroup Debugfs + * @brief request with #MRQ_DEBUGFS. + * + * The sender of an MRQ_DEBUGFS message uses #cmd to specify a debugfs + * command to execute. Legal commands are the values of @ref + * mrq_debugfs_commands. Each command requires a specific additional + * payload of data. + * + * |command |payload| + * |-------------------|-------| + * |CMD_DEBUGFS_READ |fop | + * |CMD_DEBUGFS_WRITE |fop | + * |CMD_DEBUGFS_DUMPDIR|dumpdir| + */ +struct mrq_debugfs_request { + uint32_t cmd; + union { + struct cmd_debugfs_fileop_request fop; + struct cmd_debugfs_dumpdir_request dumpdir; + } __UNION_ANON; +} __ABI_PACKED; + +/** + * @ingroup Debugfs + */ +struct mrq_debugfs_response { + /** @brief always 0 */ + int32_t reserved; + union { + /** @brief response data for CMD_DEBUGFS_READ OR + * CMD_DEBUGFS_WRITE command + */ + struct cmd_debugfs_fileop_response fop; + /** @brief response data for CMD_DEBUGFS_DUMPDIR command */ + struct cmd_debugfs_dumpdir_response dumpdir; + } __UNION_ANON; +} __ABI_PACKED; + +/** + * @addtogroup Debugfs + * @{ + */ +#define DEBUGFS_S_ISDIR (1 << 9) +#define DEBUGFS_S_IRUSR (1 << 8) +#define DEBUGFS_S_IWUSR (1 << 7) +/** @} */ + + +/** + * @ingroup MRQ_Codes + * @def MRQ_RESET + * @brief reset an IP block + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_reset_request + * * Response Payload: N/A + */ + +/** + * @ingroup Reset + */ +enum mrq_reset_commands { + CMD_RESET_ASSERT = 1, + CMD_RESET_DEASSERT = 2, + CMD_RESET_MODULE = 3, + CMD_RESET_MAX, /* not part of ABI and subject to change */ +}; + +/** + * @ingroup Reset + * @brief request with MRQ_RESET + * + * Used by the sender of an #MRQ_RESET message to request BPMP to + * assert or or deassert a given reset line. + */ +struct mrq_reset_request { + /** @brief reset action to perform (@enum mrq_reset_commands) */ + uint32_t cmd; + /** @brief id of the reset to affected */ + uint32_t reset_id; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_I2C + * @brief issue an i2c transaction + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_i2c_request + * * Response Payload: @ref mrq_i2c_response + */ + +/** + * @addtogroup I2C + * @{ + */ +#define TEGRA_I2C_IPC_MAX_IN_BUF_SIZE (MSG_DATA_MIN_SZ - 12) +#define TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE (MSG_DATA_MIN_SZ - 4) +/** @} */ + +/** + * @ingroup I2C + * @name Serial I2C flags + * Use these flags with serial_i2c_request::flags + * @{ + */ +#define SERIALI2C_TEN 0x0010 +#define SERIALI2C_RD 0x0001 +#define SERIALI2C_STOP 0x8000 +#define SERIALI2C_NOSTART 0x4000 +#define SERIALI2C_REV_DIR_ADDR 0x2000 +#define SERIALI2C_IGNORE_NAK 0x1000 +#define SERIALI2C_NO_RD_ACK 0x0800 +#define SERIALI2C_RECV_LEN 0x0400 +/** @} */ +/** @ingroup I2C */ +enum { + CMD_I2C_XFER = 1 +}; + +/** + * @ingroup I2C + * @brief serializable i2c request + * + * Instances of this structure are packed (little-endian) into + * cmd_i2c_xfer_request::data_buf. Each instance represents a single + * transaction (or a portion of a transaction with repeated starts) on + * an i2c bus. + * + * Because these structures are packed, some instances are likely to + * be misaligned. Additionally because #data is variable length, it is + * not possible to iterate through a serialized list of these + * structures without inspecting #len in each instance. It may be + * easier to serialize or deserialize cmd_i2c_xfer_request::data_buf + * manually rather than using this structure definition. +*/ +struct serial_i2c_request { + /** @brief I2C slave address */ + uint16_t addr; + /** @brief bitmask of SERIALI2C_ flags */ + uint16_t flags; + /** @brief length of I2C transaction in bytes */ + uint16_t len; + /** @brief for write transactions only, #len bytes of data */ + uint8_t data[]; +} __ABI_PACKED; + +/** + * @ingroup I2C + * @brief trigger one or more i2c transactions + */ +struct cmd_i2c_xfer_request { + /** @brief valid bus number from mach-t186/i2c-t186.h*/ + uint32_t bus_id; + + /** @brief count of valid bytes in #data_buf*/ + uint32_t data_size; + + /** @brief serialized packed instances of @ref serial_i2c_request*/ + uint8_t data_buf[TEGRA_I2C_IPC_MAX_IN_BUF_SIZE]; +} __ABI_PACKED; + +/** + * @ingroup I2C + * @brief container for data read from the i2c bus + * + * Processing an cmd_i2c_xfer_request::data_buf causes BPMP to execute + * zero or more I2C reads. The data read from the bus is serialized + * into #data_buf. + */ +struct cmd_i2c_xfer_response { + /** @brief count of valid bytes in #data_buf*/ + uint32_t data_size; + /** @brief i2c read data */ + uint8_t data_buf[TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE]; +} __ABI_PACKED; + +/** + * @ingroup I2C + * @brief request with #MRQ_I2C + */ +struct mrq_i2c_request { + /** @brief always CMD_I2C_XFER (i.e. 1) */ + uint32_t cmd; + /** @brief parameters of the transfer request */ + struct cmd_i2c_xfer_request xfer; +} __ABI_PACKED; + +/** + * @ingroup I2C + * @brief response to #MRQ_I2C + */ +struct mrq_i2c_response { + struct cmd_i2c_xfer_response xfer; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_CLK + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_clk_request + * * Response Payload: @ref mrq_clk_response + * @addtogroup Clocks + * @{ + */ + +/** + * @name MRQ_CLK sub-commands + * @{ + */ +enum { + CMD_CLK_GET_RATE = 1, + CMD_CLK_SET_RATE = 2, + CMD_CLK_ROUND_RATE = 3, + CMD_CLK_GET_PARENT = 4, + CMD_CLK_SET_PARENT = 5, + CMD_CLK_IS_ENABLED = 6, + CMD_CLK_ENABLE = 7, + CMD_CLK_DISABLE = 8, + CMD_CLK_GET_ALL_INFO = 14, + CMD_CLK_GET_MAX_CLK_ID = 15, + CMD_CLK_MAX, +}; +/** @} */ + +#define MRQ_CLK_NAME_MAXLEN 40 +#define MRQ_CLK_MAX_PARENTS 16 + +/** @private */ +struct cmd_clk_get_rate_request { + EMPTY +} __ABI_PACKED; + +struct cmd_clk_get_rate_response { + int64_t rate; +} __ABI_PACKED; + +struct cmd_clk_set_rate_request { + int32_t unused; + int64_t rate; +} __ABI_PACKED; + +struct cmd_clk_set_rate_response { + int64_t rate; +} __ABI_PACKED; + +struct cmd_clk_round_rate_request { + int32_t unused; + int64_t rate; +} __ABI_PACKED; + +struct cmd_clk_round_rate_response { + int64_t rate; +} __ABI_PACKED; + +/** @private */ +struct cmd_clk_get_parent_request { + EMPTY +} __ABI_PACKED; + +struct cmd_clk_get_parent_response { + uint32_t parent_id; +} __ABI_PACKED; + +struct cmd_clk_set_parent_request { + uint32_t parent_id; +} __ABI_PACKED; + +struct cmd_clk_set_parent_response { + uint32_t parent_id; +} __ABI_PACKED; + +/** @private */ +struct cmd_clk_is_enabled_request { + EMPTY +} __ABI_PACKED; + +struct cmd_clk_is_enabled_response { + int32_t state; +} __ABI_PACKED; + +/** @private */ +struct cmd_clk_enable_request { + EMPTY +} __ABI_PACKED; + +/** @private */ +struct cmd_clk_enable_response { + EMPTY +} __ABI_PACKED; + +/** @private */ +struct cmd_clk_disable_request { + EMPTY +} __ABI_PACKED; + +/** @private */ +struct cmd_clk_disable_response { + EMPTY +} __ABI_PACKED; + +/** @private */ +struct cmd_clk_get_all_info_request { + EMPTY +} __ABI_PACKED; + +struct cmd_clk_get_all_info_response { + uint32_t flags; + uint32_t parent; + uint32_t parents[MRQ_CLK_MAX_PARENTS]; + uint8_t num_parents; + uint8_t name[MRQ_CLK_NAME_MAXLEN]; +} __ABI_PACKED; + +/** @private */ +struct cmd_clk_get_max_clk_id_request { + EMPTY +} __ABI_PACKED; + +struct cmd_clk_get_max_clk_id_response { + uint32_t max_id; +} __ABI_PACKED; +/** @} */ + +/** + * @ingroup Clocks + * @brief request with #MRQ_CLK + * + * Used by the sender of an #MRQ_CLK message to control clocks. The + * clk_request is split into several sub-commands. Some sub-commands + * require no additional data. Others have a sub-command specific + * payload + * + * |sub-command |payload | + * |----------------------------|-----------------------| + * |CMD_CLK_GET_RATE |- | + * |CMD_CLK_SET_RATE |clk_set_rate | + * |CMD_CLK_ROUND_RATE |clk_round_rate | + * |CMD_CLK_GET_PARENT |- | + * |CMD_CLK_SET_PARENT |clk_set_parent | + * |CMD_CLK_IS_ENABLED |- | + * |CMD_CLK_ENABLE |- | + * |CMD_CLK_DISABLE |- | + * |CMD_CLK_GET_ALL_INFO |- | + * |CMD_CLK_GET_MAX_CLK_ID |- | + * + */ + +struct mrq_clk_request { + /** @brief sub-command and clock id concatenated to 32-bit word. + * - bits[31..24] is the sub-cmd. + * - bits[23..0] is the clock id + */ + uint32_t cmd_and_id; + + union { + /** @private */ + struct cmd_clk_get_rate_request clk_get_rate; + struct cmd_clk_set_rate_request clk_set_rate; + struct cmd_clk_round_rate_request clk_round_rate; + /** @private */ + struct cmd_clk_get_parent_request clk_get_parent; + struct cmd_clk_set_parent_request clk_set_parent; + /** @private */ + struct cmd_clk_enable_request clk_enable; + /** @private */ + struct cmd_clk_disable_request clk_disable; + /** @private */ + struct cmd_clk_is_enabled_request clk_is_enabled; + /** @private */ + struct cmd_clk_get_all_info_request clk_get_all_info; + /** @private */ + struct cmd_clk_get_max_clk_id_request clk_get_max_clk_id; + } __UNION_ANON; +} __ABI_PACKED; + +/** + * @ingroup Clocks + * @brief response to MRQ_CLK + * + * Each sub-command supported by @ref mrq_clk_request may return + * sub-command-specific data. Some do and some do not as indicated in + * the following table + * + * |sub-command |payload | + * |----------------------------|------------------------| + * |CMD_CLK_GET_RATE |clk_get_rate | + * |CMD_CLK_SET_RATE |clk_set_rate | + * |CMD_CLK_ROUND_RATE |clk_round_rate | + * |CMD_CLK_GET_PARENT |clk_get_parent | + * |CMD_CLK_SET_PARENT |clk_set_parent | + * |CMD_CLK_IS_ENABLED |clk_is_enabled | + * |CMD_CLK_ENABLE |- | + * |CMD_CLK_DISABLE |- | + * |CMD_CLK_GET_ALL_INFO |clk_get_all_info | + * |CMD_CLK_GET_MAX_CLK_ID |clk_get_max_id | + * + */ + +struct mrq_clk_response { + union { + struct cmd_clk_get_rate_response clk_get_rate; + struct cmd_clk_set_rate_response clk_set_rate; + struct cmd_clk_round_rate_response clk_round_rate; + struct cmd_clk_get_parent_response clk_get_parent; + struct cmd_clk_set_parent_response clk_set_parent; + /** @private */ + struct cmd_clk_enable_response clk_enable; + /** @private */ + struct cmd_clk_disable_response clk_disable; + struct cmd_clk_is_enabled_response clk_is_enabled; + struct cmd_clk_get_all_info_response clk_get_all_info; + struct cmd_clk_get_max_clk_id_response clk_get_max_clk_id; + } __UNION_ANON; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_QUERY_ABI + * @brief check if an MRQ is implemented + * + * * Platforms: All + * * Initiators: Any + * * Targets: Any + * * Request Payload: @ref mrq_query_abi_request + * * Response Payload: @ref mrq_query_abi_response + */ + +/** + * @ingroup ABI_info + * @brief request with MRQ_QUERY_ABI + * + * Used by #MRQ_QUERY_ABI call to check if MRQ code #mrq is supported + * by the recipient. + */ +struct mrq_query_abi_request { + /** @brief MRQ code to query */ + uint32_t mrq; +} __ABI_PACKED; + +/** + * @ingroup ABI_info + * @brief response to MRQ_QUERY_ABI + */ +struct mrq_query_abi_response { + /** @brief 0 if queried MRQ is supported. Else, -#BPMP_ENODEV */ + int32_t status; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_PG_READ_STATE + * @brief read the power-gating state of a partition + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_pg_read_state_request + * * Response Payload: @ref mrq_pg_read_state_response + * @addtogroup Powergating + * @{ + */ + +/** + * @brief request with #MRQ_PG_READ_STATE + * + * Used by MRQ_PG_READ_STATE call to read the current state of a + * partition. + */ +struct mrq_pg_read_state_request { + /** @brief ID of partition */ + uint32_t partition_id; +} __ABI_PACKED; + +/** + * @brief response to MRQ_PG_READ_STATE + * @todo define possible errors. + */ +struct mrq_pg_read_state_response { + /** @brief read as don't care */ + uint32_t sram_state; + /** @brief state of power partition + * * 0 : off + * * 1 : on + */ + uint32_t logic_state; +} __ABI_PACKED; + +/** @} */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_PG_UPDATE_STATE + * @brief modify the power-gating state of a partition + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_pg_update_state_request + * * Response Payload: N/A + * @addtogroup Powergating + * @{ + */ + +/** + * @brief request with mrq_pg_update_state_request + * + * Used by #MRQ_PG_UPDATE_STATE call to request BPMP to change the + * state of a power partition #partition_id. + */ +struct mrq_pg_update_state_request { + /** @brief ID of partition */ + uint32_t partition_id; + /** @brief secondary control of power partition + * @details Ignored by many versions of the BPMP + * firmware. For maximum compatibility, set the value + * according to @logic_state + * * 0x1: power ON partition (@ref logic_state == 0x3) + * * 0x3: power OFF partition (@ref logic_state == 0x1) + */ + uint32_t sram_state; + /** @brief controls state of power partition, legal values are + * * 0x1 : power OFF partition + * * 0x3 : power ON partition + */ + uint32_t logic_state; + /** @brief change state of clocks of the power partition, legal values + * * 0x0 : do not change clock state + * * 0x1 : disable partition clocks (only applicable when + * @ref logic_state == 0x1) + * * 0x3 : enable partition clocks (only applicable when + * @ref logic_state == 0x3) + */ + uint32_t clock_state; +} __ABI_PACKED; +/** @} */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_THERMAL + * @brief interact with BPMP thermal framework + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: Any + * * Request Payload: TODO + * * Response Payload: TODO + * + * @addtogroup Thermal + * + * The BPMP firmware includes a thermal framework. Drivers within the + * bpmp firmware register with the framework to provide thermal + * zones. Each thermal zone corresponds to an entity whose temperature + * can be measured. The framework also has a notion of trip points. A + * trip point consists of a thermal zone id, a temperature, and a + * callback routine. The framework invokes the callback when the zone + * hits the indicated temperature. The BPMP firmware uses this thermal + * framework interally to implement various temperature-dependent + * functions. + * + * Software on the CPU can use #MRQ_THERMAL (with payload @ref + * mrq_thermal_host_to_bpmp_request) to interact with the BPMP thermal + * framework. The CPU must It can query the number of supported zones, + * query zone temperatures, and set trip points. + * + * When a trip point set by the CPU gets crossed, BPMP firmware issues + * an IPC to the CPU having mrq_request::mrq = #MRQ_THERMAL and a + * payload of @ref mrq_thermal_bpmp_to_host_request. + * @{ + */ +enum mrq_thermal_host_to_bpmp_cmd { + /** + * @brief Check whether the BPMP driver supports the specified + * request type. + * + * Host needs to supply request parameters. + * + * mrq_response::err is 0 if the specified request is + * supported and -#BPMP_ENODEV otherwise. + */ + CMD_THERMAL_QUERY_ABI = 0, + + /** + * @brief Get the current temperature of the specified zone. + * + * Host needs to supply request parameters. + * + * mrq_response::err is + * * 0: Temperature query succeeded. + * * -#BPMP_EINVAL: Invalid request parameters. + * * -#BPMP_ENOENT: No driver registered for thermal zone.. + * * -#BPMP_EFAULT: Problem reading temperature measurement. + */ + CMD_THERMAL_GET_TEMP = 1, + + /** + * @brief Enable or disable and set the lower and upper + * thermal limits for a thermal trip point. Each zone has + * one trip point. + * + * Host needs to supply request parameters. Once the + * temperature hits a trip point, the BPMP will send a message + * to the CPU having MRQ=MRQ_THERMAL and + * type=CMD_THERMAL_HOST_TRIP_REACHED + * + * mrq_response::err is + * * 0: Trip successfully set. + * * -#BPMP_EINVAL: Invalid request parameters. + * * -#BPMP_ENOENT: No driver registered for thermal zone. + * * -#BPMP_EFAULT: Problem setting trip point. + */ + CMD_THERMAL_SET_TRIP = 2, + + /** + * @brief Get the number of supported thermal zones. + * + * No request parameters required. + * + * mrq_response::err is always 0, indicating success. + */ + CMD_THERMAL_GET_NUM_ZONES = 3, + + /** @brief: number of supported host-to-bpmp commands. May + * increase in future + */ + CMD_THERMAL_HOST_TO_BPMP_NUM +}; + +enum mrq_thermal_bpmp_to_host_cmd { + /** + * @brief Indication that the temperature for a zone has + * exceeded the range indicated in the thermal trip point + * for the zone. + * + * BPMP needs to supply request parameters. Host only needs to + * acknowledge. + */ + CMD_THERMAL_HOST_TRIP_REACHED = 100, + + /** @brief: number of supported bpmp-to-host commands. May + * increase in future + */ + CMD_THERMAL_BPMP_TO_HOST_NUM +}; + +/* + * Host->BPMP request data for request type CMD_THERMAL_QUERY_ABI + * + * zone: Request type for which to check existence. + */ +struct cmd_thermal_query_abi_request { + uint32_t type; +} __ABI_PACKED; + +/* + * Host->BPMP request data for request type CMD_THERMAL_GET_TEMP + * + * zone: Number of thermal zone. + */ +struct cmd_thermal_get_temp_request { + uint32_t zone; +} __ABI_PACKED; + +/* + * BPMP->Host reply data for request CMD_THERMAL_GET_TEMP + * + * error: 0 if request succeeded. + * -BPMP_EINVAL if request parameters were invalid. + * -BPMP_ENOENT if no driver was registered for the specified thermal zone. + * -BPMP_EFAULT for other thermal zone driver errors. + * temp: Current temperature in millicelsius. + */ +struct cmd_thermal_get_temp_response { + int32_t temp; +} __ABI_PACKED; + +/* + * Host->BPMP request data for request type CMD_THERMAL_SET_TRIP + * + * zone: Number of thermal zone. + * low: Temperature of lower trip point in millicelsius + * high: Temperature of upper trip point in millicelsius + * enabled: 1 to enable trip point, 0 to disable trip point + */ +struct cmd_thermal_set_trip_request { + uint32_t zone; + int32_t low; + int32_t high; + uint32_t enabled; +} __ABI_PACKED; + +/* + * BPMP->Host request data for request type CMD_THERMAL_HOST_TRIP_REACHED + * + * zone: Number of thermal zone where trip point was reached. + */ +struct cmd_thermal_host_trip_reached_request { + uint32_t zone; +} __ABI_PACKED; + +/* + * BPMP->Host reply data for request type CMD_THERMAL_GET_NUM_ZONES + * + * num: Number of supported thermal zones. The thermal zones are indexed + * starting from zero. + */ +struct cmd_thermal_get_num_zones_response { + uint32_t num; +} __ABI_PACKED; + +/* + * Host->BPMP request data. + * + * Reply type is union mrq_thermal_bpmp_to_host_response. + * + * type: Type of request. Values listed in enum mrq_thermal_type. + * data: Request type specific parameters. + */ +struct mrq_thermal_host_to_bpmp_request { + uint32_t type; + union { + struct cmd_thermal_query_abi_request query_abi; + struct cmd_thermal_get_temp_request get_temp; + struct cmd_thermal_set_trip_request set_trip; + } __UNION_ANON; +} __ABI_PACKED; + +/* + * BPMP->Host request data. + * + * type: Type of request. Values listed in enum mrq_thermal_type. + * data: Request type specific parameters. + */ +struct mrq_thermal_bpmp_to_host_request { + uint32_t type; + union { + struct cmd_thermal_host_trip_reached_request host_trip_reached; + } __UNION_ANON; +} __ABI_PACKED; + +/* + * Data in reply to a Host->BPMP request. + */ +union mrq_thermal_bpmp_to_host_response { + struct cmd_thermal_get_temp_response get_temp; + struct cmd_thermal_get_num_zones_response get_num_zones; +} __ABI_PACKED; +/** @} */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_CPU_VHINT + * @brief Query CPU voltage hint data + * + * * Platforms: T186 + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: @ref mrq_cpu_vhint_request + * * Response Payload: N/A + * + * @addtogroup Vhint CPU Voltage hint + * @{ + */ + +/** + * @brief request with #MRQ_CPU_VHINT + * + * Used by #MRQ_CPU_VHINT call by CCPLEX to retrieve voltage hint data + * from BPMP to memory space pointed by #addr. CCPLEX is responsible + * to allocate sizeof(cpu_vhint_data) sized block of memory and + * appropriately map it for BPMP before sending the request. + */ +struct mrq_cpu_vhint_request { + /** @brief IOVA address for the #cpu_vhint_data */ + uint32_t addr; /* struct cpu_vhint_data * */ + /** @brief ID of the cluster whose data is requested */ + uint32_t cluster_id; /* enum cluster_id */ +} __ABI_PACKED; + +/** + * @brief description of the CPU v/f relation + * + * Used by #MRQ_CPU_VHINT call to carry data pointed by #addr of + * struct mrq_cpu_vhint_request + */ +struct cpu_vhint_data { + uint32_t ref_clk_hz; /**< reference frequency in Hz */ + uint16_t pdiv; /**< post divider value */ + uint16_t mdiv; /**< input divider value */ + uint16_t ndiv_max; /**< fMAX expressed with max NDIV value */ + /** table of ndiv values as a function of vINDEX (voltage index) */ + uint16_t ndiv[80]; + /** minimum allowed NDIV value */ + uint16_t ndiv_min; + /** minimum allowed voltage hint value (as in vINDEX) */ + uint16_t vfloor; + /** maximum allowed voltage hint value (as in vINDEX) */ + uint16_t vceil; + /** post-multiplier for vindex value */ + uint16_t vindex_mult; + /** post-divider for vindex value */ + uint16_t vindex_div; + /** reserved for future use */ + uint16_t reserved[328]; +} __ABI_PACKED; + +/** @} */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_ABI_RATCHET + * @brief ABI ratchet value query + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_abi_ratchet_request + * * Response Payload: @ref mrq_abi_ratchet_response + * @addtogroup ABI_info + * @{ + */ + +/** + * @brief an ABI compatibility mechanism + * + * BPMP_ABI_RATCHET_VALUE may increase for various reasons in a future + * revision of this header file. + * 1. That future revision deprecates some MRQ + * 2. That future revision introduces a breaking change to an existing + * MRQ or + * 3. A bug is discovered in an existing implementation of the BPMP-FW + * (or possibly one of its clients) which warrants deprecating that + * implementation. + */ +#define BPMP_ABI_RATCHET_VALUE 3 + +/** + * @brief request with #MRQ_ABI_RATCHET. + * + * #ratchet should be #BPMP_ABI_RATCHET_VALUE from the ABI header + * against which the requester was compiled. + * + * If ratchet is less than BPMP's #BPMP_ABI_RATCHET_VALUE, BPMP may + * reply with mrq_response::err = -#BPMP_ERANGE to indicate that + * BPMP-FW cannot interoperate correctly with the requester. Requester + * should cease further communication with BPMP. + * + * Otherwise, err shall be 0. + */ +struct mrq_abi_ratchet_request { + /** @brief requester's ratchet value */ + uint16_t ratchet; +}; + +/** + * @brief response to #MRQ_ABI_RATCHET + * + * #ratchet shall be #BPMP_ABI_RATCHET_VALUE from the ABI header + * against which BPMP firwmare was compiled. + * + * If #ratchet is less than the requester's #BPMP_ABI_RATCHET_VALUE, + * the requster must either interoperate with BPMP according to an ABI + * header version with BPMP_ABI_RATCHET_VALUE = ratchet or cease + * communication with BPMP. + * + * If mrq_response::err is 0 and ratchet is greater than or equal to the + * requester's BPMP_ABI_RATCHET_VALUE, the requester should continue + * normal operation. + */ +struct mrq_abi_ratchet_response { + /** @brief BPMP's ratchet value */ + uint16_t ratchet; +}; +/** @} */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_EMC_DVFS_LATENCY + * @brief query frequency dependent EMC DVFS latency + * + * * Platforms: T186 + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: N/A + * * Response Payload: @ref mrq_emc_dvfs_latency_response + * @addtogroup EMC + * @{ + */ + +/** + * @brief used by @ref mrq_emc_dvfs_latency_response + */ +struct emc_dvfs_latency { + /** @brief EMC frequency in kHz */ + uint32_t freq; + /** @brief EMC DVFS latency in nanoseconds */ + uint32_t latency; +} __ABI_PACKED; + +#define EMC_DVFS_LATENCY_MAX_SIZE 14 +/** + * @brief response to #MRQ_EMC_DVFS_LATENCY + */ +struct mrq_emc_dvfs_latency_response { + /** @brief the number valid entries in #pairs */ + uint32_t num_pairs; + /** @brief EMC <frequency, latency> information */ + struct emc_dvfs_latency pairs[EMC_DVFS_LATENCY_MAX_SIZE]; +} __ABI_PACKED; + +/** @} */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_TRACE_ITER + * @brief manage the trace iterator + * + * * Platforms: All + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: N/A + * * Response Payload: @ref mrq_trace_iter_request + * @addtogroup Trace + * @{ + */ +enum { + /** @brief (re)start the tracing now. Ignore older events */ + TRACE_ITER_INIT = 0, + /** @brief clobber all events in the trace buffer */ + TRACE_ITER_CLEAN = 1 +}; + +/** + * @brief request with #MRQ_TRACE_ITER + */ +struct mrq_trace_iter_request { + /** @brief TRACE_ITER_INIT or TRACE_ITER_CLEAN */ + uint32_t cmd; +} __ABI_PACKED; + +/** @} */ + +/* + * 4. Enumerations + */ + +/* + * 4.1 CPU enumerations + * + * See <mach-t186/system-t186.h> + * + * 4.2 CPU Cluster enumerations + * + * See <mach-t186/system-t186.h> + * + * 4.3 System low power state enumerations + * + * See <mach-t186/system-t186.h> + */ + +/* + * 4.4 Clock enumerations + * + * For clock enumerations, see <mach-t186/clk-t186.h> + */ + +/* + * 4.5 Reset enumerations + * + * For reset enumerations, see <mach-t186/reset-t186.h> + */ + +/* + * 4.6 Thermal sensor enumerations + * + * For thermal sensor enumerations, see <mach-t186/thermal-t186.h> + */ + +/** + * @defgroup Error_Codes + * Negative values for mrq_response::err generally indicate some + * error. The ABI defines the following error codes. Negating these + * defines is an exercise left to the user. + * @{ + */ +/** @brief No such file or directory */ +#define BPMP_ENOENT 2 +/** @brief No MRQ handler */ +#define BPMP_ENOHANDLER 3 +/** @brief I/O error */ +#define BPMP_EIO 5 +/** @brief Bad sub-MRQ command */ +#define BPMP_EBADCMD 6 +/** @brief Not enough memory */ +#define BPMP_ENOMEM 12 +/** @brief Permission denied */ +#define BPMP_EACCES 13 +/** @brief Bad address */ +#define BPMP_EFAULT 14 +/** @brief No such device */ +#define BPMP_ENODEV 19 +/** @brief Argument is a directory */ +#define BPMP_EISDIR 21 +/** @brief Invalid argument */ +#define BPMP_EINVAL 22 +/** @brief Timeout during operation */ +#define BPMP_ETIMEDOUT 23 +/** @brief Out of range */ +#define BPMP_ERANGE 34 +/** @} */ +/** @} */ +#endif diff --git a/include/soc/tegra/bpmp.h b/include/soc/tegra/bpmp.h new file mode 100644 index 0000000..13dcd44 --- /dev/null +++ b/include/soc/tegra/bpmp.h @@ -0,0 +1,141 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __SOC_TEGRA_BPMP_H +#define __SOC_TEGRA_BPMP_H + +#include <linux/mailbox_client.h> +#include <linux/reset-controller.h> +#include <linux/semaphore.h> +#include <linux/types.h> + +#include <soc/tegra/bpmp-abi.h> + +struct tegra_bpmp_clk; + +struct tegra_bpmp_soc { + struct { + struct { + unsigned int offset; + unsigned int count; + unsigned int timeout; + } cpu_tx, thread, cpu_rx; + } channels; + unsigned int num_resets; +}; + +struct tegra_bpmp_mb_data { + u32 code; + u32 flags; + u8 data[MSG_DATA_MIN_SZ]; +} __packed; + +struct tegra_bpmp_channel { + struct tegra_bpmp *bpmp; + struct tegra_bpmp_mb_data *ib; + struct tegra_bpmp_mb_data *ob; + struct completion completion; + struct tegra_ivc *ivc; +}; + +typedef void (*tegra_bpmp_mrq_handler_t)(unsigned int mrq, + struct tegra_bpmp_channel *channel, + void *data); + +struct tegra_bpmp_mrq { + struct list_head list; + unsigned int mrq; + tegra_bpmp_mrq_handler_t handler; + void *data; +}; + +struct tegra_bpmp { + const struct tegra_bpmp_soc *soc; + struct device *dev; + + struct { + struct gen_pool *pool; + dma_addr_t phys; + void *virt; + } tx, rx; + + struct { + struct mbox_client client; + struct mbox_chan *channel; + } mbox; + + struct tegra_bpmp_channel *channels; + unsigned int num_channels; + + struct { + unsigned long *allocated; + unsigned long *busy; + unsigned int count; + struct semaphore lock; + } threaded; + + struct list_head mrqs; + spinlock_t lock; + + struct tegra_bpmp_clk **clocks; + unsigned int num_clocks; + + struct reset_controller_dev rstc; +}; + +struct tegra_bpmp *tegra_bpmp_get(struct device *dev); +void tegra_bpmp_put(struct tegra_bpmp *bpmp); + +struct tegra_bpmp_message { + unsigned int mrq; + + struct { + const void *data; + size_t size; + } tx; + + struct { + void *data; + size_t size; + } rx; +}; + +int tegra_bpmp_transfer_atomic(struct tegra_bpmp *bpmp, + struct tegra_bpmp_message *msg); +int tegra_bpmp_transfer(struct tegra_bpmp *bpmp, + struct tegra_bpmp_message *msg); + +int tegra_bpmp_request_mrq(struct tegra_bpmp *bpmp, unsigned int mrq, + tegra_bpmp_mrq_handler_t handler, void *data); +void tegra_bpmp_free_mrq(struct tegra_bpmp *bpmp, unsigned int mrq, + void *data); + +#if IS_ENABLED(CONFIG_CLK_TEGRA_BPMP) +int tegra_bpmp_init_clocks(struct tegra_bpmp *bpmp); +#else +static inline int tegra_bpmp_init_clocks(struct tegra_bpmp *bpmp) +{ + return 0; +} +#endif + +#if IS_ENABLED(CONFIG_RESET_TEGRA_BPMP) +int tegra_bpmp_init_resets(struct tegra_bpmp *bpmp); +#else +static inline int tegra_bpmp_init_resets(struct tegra_bpmp *bpmp) +{ + return 0; +} +#endif + +#endif /* __SOC_TEGRA_BPMP_H */ diff --git a/include/soc/tegra/ivc.h b/include/soc/tegra/ivc.h new file mode 100644 index 0000000..b13cc43 --- /dev/null +++ b/include/soc/tegra/ivc.h @@ -0,0 +1,109 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __TEGRA_IVC_H + +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/types.h> + +struct tegra_ivc_header; + +struct tegra_ivc { + struct device *peer; + + struct { + struct tegra_ivc_header *channel; + unsigned int position; + dma_addr_t phys; + } rx, tx; + + void (*notify)(struct tegra_ivc *ivc, void *data); + void *notify_data; + + unsigned int num_frames; + size_t frame_size; +}; + +/** + * tegra_ivc_read_get_next_frame - Peek at the next frame to receive + * @ivc pointer of the IVC channel + * + * Peek at the next frame to be received, without removing it from + * the queue. + * + * Returns a pointer to the frame, or an error encoded pointer. + */ +void *tegra_ivc_read_get_next_frame(struct tegra_ivc *ivc); + +/** + * tegra_ivc_read_advance - Advance the read queue + * @ivc pointer of the IVC channel + * + * Advance the read queue + * + * Returns 0, or a negative error value if failed. + */ +int tegra_ivc_read_advance(struct tegra_ivc *ivc); + +/** + * tegra_ivc_write_get_next_frame - Poke at the next frame to transmit + * @ivc pointer of the IVC channel + * + * Get access to the next frame. + * + * Returns a pointer to the frame, or an error encoded pointer. + */ +void *tegra_ivc_write_get_next_frame(struct tegra_ivc *ivc); + +/** + * tegra_ivc_write_advance - Advance the write queue + * @ivc pointer of the IVC channel + * + * Advance the write queue + * + * Returns 0, or a negative error value if failed. + */ +int tegra_ivc_write_advance(struct tegra_ivc *ivc); + +/** + * tegra_ivc_notified - handle internal messages + * @ivc pointer of the IVC channel + * + * This function must be called following every notification. + * + * Returns 0 if the channel is ready for communication, or -EAGAIN if a channel + * reset is in progress. + */ +int tegra_ivc_notified(struct tegra_ivc *ivc); + +/** + * tegra_ivc_reset - initiates a reset of the shared memory state + * @ivc pointer of the IVC channel + * + * This function must be called after a channel is reserved before it is used + * for communication. The channel will be ready for use when a subsequent call + * to notify the remote of the channel reset. + */ +void tegra_ivc_reset(struct tegra_ivc *ivc); + +size_t tegra_ivc_align(size_t size); +unsigned tegra_ivc_total_queue_size(unsigned queue_size); +int tegra_ivc_init(struct tegra_ivc *ivc, struct device *peer, void *rx, + dma_addr_t rx_phys, void *tx, dma_addr_t tx_phys, + unsigned int num_frames, size_t frame_size, + void (*notify)(struct tegra_ivc *ivc, void *data), + void *data); +void tegra_ivc_cleanup(struct tegra_ivc *ivc); + +#endif /* __TEGRA_IVC_H */ diff --git a/include/soc/tegra/pmc.h b/include/soc/tegra/pmc.h index e9e5347..2f271d1 100644 --- a/include/soc/tegra/pmc.h +++ b/include/soc/tegra/pmc.h @@ -76,37 +76,73 @@ int tegra_pmc_cpu_remove_clamping(unsigned int cpuid); #define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D -#define TEGRA_IO_RAIL_CSIA 0 -#define TEGRA_IO_RAIL_CSIB 1 -#define TEGRA_IO_RAIL_DSI 2 -#define TEGRA_IO_RAIL_MIPI_BIAS 3 -#define TEGRA_IO_RAIL_PEX_BIAS 4 -#define TEGRA_IO_RAIL_PEX_CLK1 5 -#define TEGRA_IO_RAIL_PEX_CLK2 6 -#define TEGRA_IO_RAIL_USB0 9 -#define TEGRA_IO_RAIL_USB1 10 -#define TEGRA_IO_RAIL_USB2 11 -#define TEGRA_IO_RAIL_USB_BIAS 12 -#define TEGRA_IO_RAIL_NAND 13 -#define TEGRA_IO_RAIL_UART 14 -#define TEGRA_IO_RAIL_BB 15 -#define TEGRA_IO_RAIL_AUDIO 17 -#define TEGRA_IO_RAIL_HSIC 19 -#define TEGRA_IO_RAIL_COMP 22 -#define TEGRA_IO_RAIL_HDMI 28 -#define TEGRA_IO_RAIL_PEX_CNTRL 32 -#define TEGRA_IO_RAIL_SDMMC1 33 -#define TEGRA_IO_RAIL_SDMMC3 34 -#define TEGRA_IO_RAIL_SDMMC4 35 -#define TEGRA_IO_RAIL_CAM 36 -#define TEGRA_IO_RAIL_RES 37 -#define TEGRA_IO_RAIL_HV 38 -#define TEGRA_IO_RAIL_DSIB 39 -#define TEGRA_IO_RAIL_DSIC 40 -#define TEGRA_IO_RAIL_DSID 41 -#define TEGRA_IO_RAIL_CSIE 44 -#define TEGRA_IO_RAIL_LVDS 57 -#define TEGRA_IO_RAIL_SYS_DDC 58 +/** + * enum tegra_io_pad - I/O pad group identifier + * + * I/O pins on Tegra SoCs are grouped into so-called I/O pads. Each such pad + * can be used to control the common voltage signal level and power state of + * the pins of the given pad. + */ +enum tegra_io_pad { + TEGRA_IO_PAD_AUDIO, + TEGRA_IO_PAD_AUDIO_HV, + TEGRA_IO_PAD_BB, + TEGRA_IO_PAD_CAM, + TEGRA_IO_PAD_COMP, + TEGRA_IO_PAD_CSIA, + TEGRA_IO_PAD_CSIB, + TEGRA_IO_PAD_CSIC, + TEGRA_IO_PAD_CSID, + TEGRA_IO_PAD_CSIE, + TEGRA_IO_PAD_CSIF, + TEGRA_IO_PAD_DBG, + TEGRA_IO_PAD_DEBUG_NONAO, + TEGRA_IO_PAD_DMIC, + TEGRA_IO_PAD_DP, + TEGRA_IO_PAD_DSI, + TEGRA_IO_PAD_DSIB, + TEGRA_IO_PAD_DSIC, + TEGRA_IO_PAD_DSID, + TEGRA_IO_PAD_EMMC, + TEGRA_IO_PAD_EMMC2, + TEGRA_IO_PAD_GPIO, + TEGRA_IO_PAD_HDMI, + TEGRA_IO_PAD_HSIC, + TEGRA_IO_PAD_HV, + TEGRA_IO_PAD_LVDS, + TEGRA_IO_PAD_MIPI_BIAS, + TEGRA_IO_PAD_NAND, + TEGRA_IO_PAD_PEX_BIAS, + TEGRA_IO_PAD_PEX_CLK1, + TEGRA_IO_PAD_PEX_CLK2, + TEGRA_IO_PAD_PEX_CNTRL, + TEGRA_IO_PAD_SDMMC1, + TEGRA_IO_PAD_SDMMC3, + TEGRA_IO_PAD_SDMMC4, + TEGRA_IO_PAD_SPI, + TEGRA_IO_PAD_SPI_HV, + TEGRA_IO_PAD_SYS_DDC, + TEGRA_IO_PAD_UART, + TEGRA_IO_PAD_USB0, + TEGRA_IO_PAD_USB1, + TEGRA_IO_PAD_USB2, + TEGRA_IO_PAD_USB3, + TEGRA_IO_PAD_USB_BIAS, +}; + +/* deprecated, use TEGRA_IO_PAD_{HDMI,LVDS} instead */ +#define TEGRA_IO_RAIL_HDMI TEGRA_IO_PAD_HDMI +#define TEGRA_IO_RAIL_LVDS TEGRA_IO_PAD_LVDS + +/** + * enum tegra_io_pad_voltage - voltage level of the I/O pad's source rail + * @TEGRA_IO_PAD_1800000UV: 1.8 V + * @TEGRA_IO_PAD_3300000UV: 3.3 V + */ +enum tegra_io_pad_voltage { + TEGRA_IO_PAD_1800000UV, + TEGRA_IO_PAD_3300000UV, +}; #ifdef CONFIG_ARCH_TEGRA int tegra_powergate_is_powered(unsigned int id); @@ -118,6 +154,13 @@ int tegra_powergate_remove_clamping(unsigned int id); int tegra_powergate_sequence_power_up(unsigned int id, struct clk *clk, struct reset_control *rst); +int tegra_io_pad_power_enable(enum tegra_io_pad id); +int tegra_io_pad_power_disable(enum tegra_io_pad id); +int tegra_io_pad_set_voltage(enum tegra_io_pad id, + enum tegra_io_pad_voltage voltage); +int tegra_io_pad_get_voltage(enum tegra_io_pad id); + +/* deprecated, use tegra_io_pad_power_{enable,disable}() instead */ int tegra_io_rail_power_on(unsigned int id); int tegra_io_rail_power_off(unsigned int id); #else @@ -148,6 +191,27 @@ static inline int tegra_powergate_sequence_power_up(unsigned int id, return -ENOSYS; } +static inline int tegra_io_pad_power_enable(enum tegra_io_pad id) +{ + return -ENOSYS; +} + +static inline int tegra_io_pad_power_disable(enum tegra_io_pad id) +{ + return -ENOSYS; +} + +static inline int tegra_io_pad_set_voltage(enum tegra_io_pad id, + enum tegra_io_pad_voltage voltage) +{ + return -ENOSYS; +} + +static inline int tegra_io_pad_get_voltage(enum tegra_io_pad id) +{ + return -ENOSYS; +} + static inline int tegra_io_rail_power_on(unsigned int id) { return -ENOSYS; |
