summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/scsi/ufs/ufshcd.c166
-rw-r--r--drivers/scsi/ufs/ufshcd.h27
2 files changed, 160 insertions, 33 deletions
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index f2b50bc..8bbb37d 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -179,6 +179,8 @@ static void ufshcd_hba_exit(struct ufs_hba *hba);
static int ufshcd_probe_hba(struct ufs_hba *hba);
static int ufshcd_host_reset_and_restore(struct ufs_hba *hba);
static irqreturn_t ufshcd_intr(int irq, void *__hba);
+static int ufshcd_config_pwr_mode(struct ufs_hba *hba,
+ struct ufs_pa_layer_attr *desired_pwr_mode);
static inline int ufshcd_enable_irq(struct ufs_hba *hba)
{
@@ -1958,40 +1960,83 @@ static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba)
}
/**
- * ufshcd_config_max_pwr_mode - Set & Change power mode with
- * maximum capability attribute information.
- * @hba: per adapter instance
- *
- * Returns 0 on success, non-zero value on failure
+ * ufshcd_get_max_pwr_mode - reads the max power mode negotiated with device
+ * @hba: per-adapter instance
*/
-static int ufshcd_config_max_pwr_mode(struct ufs_hba *hba)
+static int ufshcd_get_max_pwr_mode(struct ufs_hba *hba)
{
- enum {RX = 0, TX = 1};
- u32 lanes[] = {1, 1};
- u32 gear[] = {1, 1};
- u8 pwr[] = {FASTAUTO_MODE, FASTAUTO_MODE};
- int ret;
+ struct ufs_pa_layer_attr *pwr_info = &hba->max_pwr_info.info;
+
+ if (hba->max_pwr_info.is_valid)
+ return 0;
+
+ pwr_info->pwr_tx = FASTAUTO_MODE;
+ pwr_info->pwr_rx = FASTAUTO_MODE;
+ pwr_info->hs_rate = PA_HS_MODE_B;
/* Get the connected lane count */
- ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES), &lanes[RX]);
- ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), &lanes[TX]);
+ ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES),
+ &pwr_info->lane_rx);
+ ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
+ &pwr_info->lane_tx);
+
+ if (!pwr_info->lane_rx || !pwr_info->lane_tx) {
+ dev_err(hba->dev, "%s: invalid connected lanes value. rx=%d, tx=%d\n",
+ __func__,
+ pwr_info->lane_rx,
+ pwr_info->lane_tx);
+ return -EINVAL;
+ }
/*
* First, get the maximum gears of HS speed.
* If a zero value, it means there is no HSGEAR capability.
* Then, get the maximum gears of PWM speed.
*/
- ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &gear[RX]);
- if (!gear[RX]) {
- ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), &gear[RX]);
- pwr[RX] = SLOWAUTO_MODE;
+ ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &pwr_info->gear_rx);
+ if (!pwr_info->gear_rx) {
+ ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR),
+ &pwr_info->gear_rx);
+ if (!pwr_info->gear_rx) {
+ dev_err(hba->dev, "%s: invalid max pwm rx gear read = %d\n",
+ __func__, pwr_info->gear_rx);
+ return -EINVAL;
+ }
+ pwr_info->pwr_rx = SLOWAUTO_MODE;
}
- ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &gear[TX]);
- if (!gear[TX]) {
+ ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR),
+ &pwr_info->gear_tx);
+ if (!pwr_info->gear_tx) {
ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR),
- &gear[TX]);
- pwr[TX] = SLOWAUTO_MODE;
+ &pwr_info->gear_tx);
+ if (!pwr_info->gear_tx) {
+ dev_err(hba->dev, "%s: invalid max pwm tx gear read = %d\n",
+ __func__, pwr_info->gear_tx);
+ return -EINVAL;
+ }
+ pwr_info->pwr_tx = SLOWAUTO_MODE;
+ }
+
+ hba->max_pwr_info.is_valid = true;
+ return 0;
+}
+
+static int ufshcd_change_power_mode(struct ufs_hba *hba,
+ struct ufs_pa_layer_attr *pwr_mode)
+{
+ int ret;
+
+ /* if already configured to the requested pwr_mode */
+ if (pwr_mode->gear_rx == hba->pwr_info.gear_rx &&
+ pwr_mode->gear_tx == hba->pwr_info.gear_tx &&
+ pwr_mode->lane_rx == hba->pwr_info.lane_rx &&
+ pwr_mode->lane_tx == hba->pwr_info.lane_tx &&
+ pwr_mode->pwr_rx == hba->pwr_info.pwr_rx &&
+ pwr_mode->pwr_tx == hba->pwr_info.pwr_tx &&
+ pwr_mode->hs_rate == hba->pwr_info.hs_rate) {
+ dev_dbg(hba->dev, "%s: power already configured\n", __func__);
+ return 0;
}
/*
@@ -2000,23 +2045,67 @@ static int ufshcd_config_max_pwr_mode(struct ufs_hba *hba)
* - PA_TXGEAR, PA_ACTIVETXDATALANES, PA_TXTERMINATION,
* - PA_HSSERIES
*/
- ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXGEAR), gear[RX]);
- ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVERXDATALANES), lanes[RX]);
- if (pwr[RX] == FASTAUTO_MODE)
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXGEAR), pwr_mode->gear_rx);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVERXDATALANES),
+ pwr_mode->lane_rx);
+ if (pwr_mode->pwr_rx == FASTAUTO_MODE ||
+ pwr_mode->pwr_rx == FAST_MODE)
ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), TRUE);
+ else
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), FALSE);
- ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), gear[TX]);
- ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES), lanes[TX]);
- if (pwr[TX] == FASTAUTO_MODE)
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), pwr_mode->gear_tx);
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES),
+ pwr_mode->lane_tx);
+ if (pwr_mode->pwr_tx == FASTAUTO_MODE ||
+ pwr_mode->pwr_tx == FAST_MODE)
ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), TRUE);
+ else
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), FALSE);
- if (pwr[RX] == FASTAUTO_MODE || pwr[TX] == FASTAUTO_MODE)
- ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES), PA_HS_MODE_B);
+ if (pwr_mode->pwr_rx == FASTAUTO_MODE ||
+ pwr_mode->pwr_tx == FASTAUTO_MODE ||
+ pwr_mode->pwr_rx == FAST_MODE ||
+ pwr_mode->pwr_tx == FAST_MODE)
+ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES),
+ pwr_mode->hs_rate);
- ret = ufshcd_uic_change_pwr_mode(hba, pwr[RX] << 4 | pwr[TX]);
- if (ret)
+ ret = ufshcd_uic_change_pwr_mode(hba, pwr_mode->pwr_rx << 4
+ | pwr_mode->pwr_tx);
+
+ if (ret) {
dev_err(hba->dev,
- "pwr_mode: power mode change failed %d\n", ret);
+ "%s: power mode change failed %d\n", __func__, ret);
+ } else {
+ if (hba->vops && hba->vops->pwr_change_notify)
+ hba->vops->pwr_change_notify(hba,
+ POST_CHANGE, NULL, pwr_mode);
+
+ memcpy(&hba->pwr_info, pwr_mode,
+ sizeof(struct ufs_pa_layer_attr));
+ }
+
+ return ret;
+}
+
+/**
+ * ufshcd_config_pwr_mode - configure a new power mode
+ * @hba: per-adapter instance
+ * @desired_pwr_mode: desired power configuration
+ */
+static int ufshcd_config_pwr_mode(struct ufs_hba *hba,
+ struct ufs_pa_layer_attr *desired_pwr_mode)
+{
+ struct ufs_pa_layer_attr final_params = { 0 };
+ int ret;
+
+ if (hba->vops && hba->vops->pwr_change_notify)
+ hba->vops->pwr_change_notify(hba,
+ PRE_CHANGE, desired_pwr_mode, &final_params);
+ else
+ memcpy(&final_params, desired_pwr_mode, sizeof(final_params));
+
+ ret = ufshcd_change_power_mode(hba, &final_params);
return ret;
}
@@ -3757,7 +3846,16 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL;
hba->wlun_dev_clr_ua = true;
- ufshcd_config_max_pwr_mode(hba);
+ if (ufshcd_get_max_pwr_mode(hba)) {
+ dev_err(hba->dev,
+ "%s: Failed getting max supported power mode\n",
+ __func__);
+ } else {
+ ret = ufshcd_config_pwr_mode(hba, &hba->max_pwr_info.info);
+ if (ret)
+ dev_err(hba->dev, "%s: Failed setting power mode, err = %d\n",
+ __func__, ret);
+ }
/*
* If we are in error handling context or in power management callbacks
@@ -4920,6 +5018,8 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
host->unique_id = host->host_no;
host->max_cmd_len = MAX_CDB_SIZE;
+ hba->max_pwr_info.is_valid = false;
+
/* Initailize wait queue for task management */
init_waitqueue_head(&hba->tm_wq);
init_waitqueue_head(&hba->tm_tag_wq);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index e1bde05..343b18a 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -221,6 +221,22 @@ struct ufs_clk_info {
#define PRE_CHANGE 0
#define POST_CHANGE 1
+
+struct ufs_pa_layer_attr {
+ u32 gear_rx;
+ u32 gear_tx;
+ u32 lane_rx;
+ u32 lane_tx;
+ u32 pwr_rx;
+ u32 pwr_tx;
+ u32 hs_rate;
+};
+
+struct ufs_pwr_mode_info {
+ bool is_valid;
+ struct ufs_pa_layer_attr info;
+};
+
/**
* struct ufs_hba_variant_ops - variant specific callbacks
* @name: variant name
@@ -232,6 +248,9 @@ struct ufs_clk_info {
* variant specific Uni-Pro initialization.
* @link_startup_notify: called before and after Link startup is carried out
* to allow variant specific Uni-Pro initialization.
+ * @pwr_change_notify: called before and after a power mode change
+ * is carried out to allow vendor spesific capabilities
+ * to be set.
* @suspend: called during host controller PM callback
* @resume: called during host controller PM callback
*/
@@ -243,6 +262,9 @@ struct ufs_hba_variant_ops {
int (*setup_regulators)(struct ufs_hba *, bool);
int (*hce_enable_notify)(struct ufs_hba *, bool);
int (*link_startup_notify)(struct ufs_hba *, bool);
+ int (*pwr_change_notify)(struct ufs_hba *,
+ bool, struct ufs_pa_layer_attr *,
+ struct ufs_pa_layer_attr *);
int (*suspend)(struct ufs_hba *, enum ufs_pm_op);
int (*resume)(struct ufs_hba *, enum ufs_pm_op);
};
@@ -302,6 +324,8 @@ struct ufs_init_prefetch {
* @auto_bkops_enabled: to track whether bkops is enabled in device
* @vreg_info: UFS device voltage regulator information
* @clk_list_head: UFS host controller clocks list node head
+ * @pwr_info: holds current power mode
+ * @max_pwr_info: keeps the device max valid pwm
*/
struct ufs_hba {
void __iomem *mmio_base;
@@ -387,6 +411,9 @@ struct ufs_hba {
struct list_head clk_list_head;
bool wlun_dev_clr_ua;
+
+ struct ufs_pa_layer_attr pwr_info;
+ struct ufs_pwr_mode_info max_pwr_info;
};
#define ufshcd_writel(hba, val, reg) \
OpenPOWER on IntegriCloud