diff options
46 files changed, 87 insertions, 28109 deletions
diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt index b971456..5575539 100644 --- a/Documentation/filesystems/ext2.txt +++ b/Documentation/filesystems/ext2.txt @@ -360,8 +360,8 @@ and are copied into the filesystem. If a transaction is incomplete at the time of the crash, then there is no guarantee of consistency for the blocks in that transaction so they are discarded (which means any filesystem changes they represent are also lost). -Check Documentation/filesystems/ext3.txt if you want to read more about -ext3 and journaling. +Check Documentation/filesystems/ext4.txt if you want to read more about +ext4 and journaling. References ========== diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt index 7ed0d17..58758fb 100644 --- a/Documentation/filesystems/ext3.txt +++ b/Documentation/filesystems/ext3.txt @@ -6,210 +6,7 @@ Ext3 was originally released in September 1999. Written by Stephen Tweedie for the 2.2 branch, and ported to 2.4 kernels by Peter Braam, Andreas Dilger, Andrew Morton, Alexander Viro, Ted Ts'o and Stephen Tweedie. -Ext3 is the ext2 filesystem enhanced with journalling capabilities. +Ext3 is the ext2 filesystem enhanced with journalling capabilities. The +filesystem is a subset of ext4 filesystem so use ext4 driver for accessing +ext3 filesystems. -Options -======= - -When mounting an ext3 filesystem, the following option are accepted: -(*) == default - -ro Mount filesystem read only. Note that ext3 will replay - the journal (and thus write to the partition) even when - mounted "read only". Mount options "ro,noload" can be - used to prevent writes to the filesystem. - -journal=update Update the ext3 file system's journal to the current - format. - -journal=inum When a journal already exists, this option is ignored. - Otherwise, it specifies the number of the inode which - will represent the ext3 file system's journal file. - -journal_path=path -journal_dev=devnum When the external journal device's major/minor numbers - have changed, these options allow the user to specify - the new journal location. The journal device is - identified through either its new major/minor numbers - encoded in devnum, or via a path to the device. - -norecovery Don't load the journal on mounting. Note that this forces -noload mount of inconsistent filesystem, which can lead to - various problems. - -data=journal All data are committed into the journal prior to being - written into the main file system. - -data=ordered (*) All data are forced directly out to the main file - system prior to its metadata being committed to the - journal. - -data=writeback Data ordering is not preserved, data may be written - into the main file system after its metadata has been - committed to the journal. - -commit=nrsec (*) Ext3 can be told to sync all its data and metadata - every 'nrsec' seconds. The default value is 5 seconds. - This means that if you lose your power, you will lose - as much as the latest 5 seconds of work (your - filesystem will not be damaged though, thanks to the - journaling). This default value (or any low value) - will hurt performance, but it's good for data-safety. - Setting it to 0 will have the same effect as leaving - it at the default (5 seconds). - Setting it to very large values will improve - performance. - -barrier=<0|1(*)> This enables/disables the use of write barriers in -barrier (*) the jbd code. barrier=0 disables, barrier=1 enables. -nobarrier This also requires an IO stack which can support - barriers, and if jbd gets an error on a barrier - write, it will disable again with a warning. - Write barriers enforce proper on-disk ordering - of journal commits, making volatile disk write caches - safe to use, at some performance penalty. If - your disks are battery-backed in one way or another, - disabling barriers may safely improve performance. - The mount options "barrier" and "nobarrier" can - also be used to enable or disable barriers, for - consistency with other ext3 mount options. - -user_xattr Enables Extended User Attributes. Additionally, you - need to have extended attribute support enabled in the - kernel configuration (CONFIG_EXT3_FS_XATTR). See the - attr(5) manual page and http://acl.bestbits.at/ to - learn more about extended attributes. - -nouser_xattr Disables Extended User Attributes. - -acl Enables POSIX Access Control Lists support. - Additionally, you need to have ACL support enabled in - the kernel configuration (CONFIG_EXT3_FS_POSIX_ACL). - See the acl(5) manual page and http://acl.bestbits.at/ - for more information. - -noacl This option disables POSIX Access Control List - support. - -reservation - -noreservation - -bsddf (*) Make 'df' act like BSD. -minixdf Make 'df' act like Minix. - -check=none Don't do extra checking of bitmaps on mount. -nocheck - -debug Extra debugging information is sent to syslog. - -errors=remount-ro Remount the filesystem read-only on an error. -errors=continue Keep going on a filesystem error. -errors=panic Panic and halt the machine if an error occurs. - (These mount options override the errors behavior - specified in the superblock, which can be - configured using tune2fs.) - -data_err=ignore(*) Just print an error message if an error occurs - in a file data buffer in ordered mode. -data_err=abort Abort the journal if an error occurs in a file - data buffer in ordered mode. - -grpid Give objects the same group ID as their creator. -bsdgroups - -nogrpid (*) New objects have the group ID of their creator. -sysvgroups - -resgid=n The group ID which may use the reserved blocks. - -resuid=n The user ID which may use the reserved blocks. - -sb=n Use alternate superblock at this location. - -quota These options are ignored by the filesystem. They -noquota are used only by quota tools to recognize volumes -grpquota where quota should be turned on. See documentation -usrquota in the quota-tools package for more details - (http://sourceforge.net/projects/linuxquota). - -jqfmt=<quota type> These options tell filesystem details about quota -usrjquota=<file> so that quota information can be properly updated -grpjquota=<file> during journal replay. They replace the above - quota options. See documentation in the quota-tools - package for more details - (http://sourceforge.net/projects/linuxquota). - -Specification -============= -Ext3 shares all disk implementation with the ext2 filesystem, and adds -transactions capabilities to ext2. Journaling is done by the Journaling Block -Device layer. - -Journaling Block Device layer ------------------------------ -The Journaling Block Device layer (JBD) isn't ext3 specific. It was designed -to add journaling capabilities to a block device. The ext3 filesystem code -will inform the JBD of modifications it is performing (called a transaction). -The journal supports the transactions start and stop, and in case of a crash, -the journal can replay the transactions to quickly put the partition back into -a consistent state. - -Handles represent a single atomic update to a filesystem. JBD can handle an -external journal on a block device. - -Data Mode ---------- -There are 3 different data modes: - -* writeback mode -In data=writeback mode, ext3 does not journal data at all. This mode provides -a similar level of journaling as that of XFS, JFS, and ReiserFS in its default -mode - metadata journaling. A crash+recovery can cause incorrect data to -appear in files which were written shortly before the crash. This mode will -typically provide the best ext3 performance. - -* ordered mode -In data=ordered mode, ext3 only officially journals metadata, but it logically -groups metadata and data blocks into a single unit called a transaction. When -it's time to write the new metadata out to disk, the associated data blocks -are written first. In general, this mode performs slightly slower than -writeback but significantly faster than journal mode. - -* journal mode -data=journal mode provides full data and metadata journaling. All new data is -written to the journal first, and then to its final location. -In the event of a crash, the journal can be replayed, bringing both data and -metadata into a consistent state. This mode is the slowest except when data -needs to be read from and written to disk at the same time where it -outperforms all other modes. - -Compatibility -------------- - -Ext2 partitions can be easily convert to ext3, with `tune2fs -j <dev>`. -Ext3 is fully compatible with Ext2. Ext3 partitions can easily be mounted as -Ext2. - - -External Tools -============== -See manual pages to learn more. - -tune2fs: create a ext3 journal on a ext2 partition with the -j flag. -mke2fs: create a ext3 partition with the -j flag. -debugfs: ext2 and ext3 file system debugger. -ext2online: online (mounted) ext2 and ext3 filesystem resizer - - -References -========== - -kernel source: <file:fs/ext3/> - <file:fs/jbd/> - -programs: http://e2fsprogs.sourceforge.net/ - http://ext2resize.sourceforge.net - -useful links: http://www.ibm.com/developerworks/library/l-fs7/index.html - http://www.ibm.com/developerworks/library/l-fs8/index.html diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 5eb8456..8c6f07a 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -769,7 +769,7 @@ struct address_space_operations { to stall to allow flushers a chance to complete some IO. Ordinarily it can use PageDirty and PageWriteback but some filesystems have more complex state (unstable pages in NFS prevent reclaim) or - do not set those flags due to locking problems (jbd). This callback + do not set those flags due to locking problems. This callback allows a filesystem to indicate to the VM if a page should be treated as dirty or writeback for the purposes of stalling. diff --git a/MAINTAINERS b/MAINTAINERS index a226416..0555bdb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4059,15 +4059,6 @@ F: Documentation/filesystems/ext2.txt F: fs/ext2/ F: include/linux/ext2* -EXT3 FILE SYSTEM -M: Jan Kara <jack@suse.com> -M: Andrew Morton <akpm@linux-foundation.org> -M: Andreas Dilger <adilger.kernel@dilger.ca> -L: linux-ext4@vger.kernel.org -S: Maintained -F: Documentation/filesystems/ext3.txt -F: fs/ext3/ - EXT4 FILE SYSTEM M: "Theodore Ts'o" <tytso@mit.edu> M: Andreas Dilger <adilger.kernel@dilger.ca> @@ -5751,16 +5742,9 @@ S: Maintained F: fs/jffs2/ F: include/uapi/linux/jffs2.h -JOURNALLING LAYER FOR BLOCK DEVICES (JBD) -M: Andrew Morton <akpm@linux-foundation.org> -M: Jan Kara <jack@suse.com> -L: linux-ext4@vger.kernel.org -S: Maintained -F: fs/jbd/ -F: include/linux/jbd.h - JOURNALLING LAYER FOR BLOCK DEVICES (JBD2) M: "Theodore Ts'o" <tytso@mit.edu> +M: Jan Kara <jack@suse.com> L: linux-ext4@vger.kernel.org S: Maintained F: fs/jbd2/ @@ -11,18 +11,15 @@ config DCACHE_WORD_ACCESS if BLOCK source "fs/ext2/Kconfig" -source "fs/ext3/Kconfig" source "fs/ext4/Kconfig" -source "fs/jbd/Kconfig" source "fs/jbd2/Kconfig" config FS_MBCACHE # Meta block cache for Extended Attributes (ext2/ext3/ext4) tristate default y if EXT2_FS=y && EXT2_FS_XATTR - default y if EXT3_FS=y && EXT3_FS_XATTR default y if EXT4_FS=y - default m if EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS + default m if EXT2_FS_XATTR || EXT4_FS source "fs/reiserfs/Kconfig" source "fs/jfs/Kconfig" diff --git a/fs/Makefile b/fs/Makefile index cb20e4b..09e051f 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -62,12 +62,10 @@ obj-$(CONFIG_DLM) += dlm/ # Do not add any filesystems before this line obj-$(CONFIG_FSCACHE) += fscache/ obj-$(CONFIG_REISERFS_FS) += reiserfs/ -obj-$(CONFIG_EXT3_FS) += ext3/ # Before ext2 so root fs can be ext3 obj-$(CONFIG_EXT2_FS) += ext2/ # We place ext4 after ext2 so plain ext2 root fs's are mounted using ext2 # unless explicitly requested by rootfstype obj-$(CONFIG_EXT4_FS) += ext4/ -obj-$(CONFIG_JBD) += jbd/ obj-$(CONFIG_JBD2) += jbd2/ obj-$(CONFIG_CRAMFS) += cramfs/ obj-$(CONFIG_SQUASHFS) += squashfs/ diff --git a/fs/ext3/Kconfig b/fs/ext3/Kconfig deleted file mode 100644 index e8c6ba0..0000000 --- a/fs/ext3/Kconfig +++ /dev/null @@ -1,89 +0,0 @@ -config EXT3_FS - tristate "Ext3 journalling file system support" - select JBD - help - This is the journalling version of the Second extended file system - (often called ext3), the de facto standard Linux file system - (method to organize files on a storage device) for hard disks. - - The journalling code included in this driver means you do not have - to run e2fsck (file system checker) on your file systems after a - crash. The journal keeps track of any changes that were being made - at the time the system crashed, and can ensure that your file system - is consistent without the need for a lengthy check. - - Other than adding the journal to the file system, the on-disk format - of ext3 is identical to ext2. It is possible to freely switch - between using the ext3 driver and the ext2 driver, as long as the - file system has been cleanly unmounted, or e2fsck is run on the file - system. - - To add a journal on an existing ext2 file system or change the - behavior of ext3 file systems, you can use the tune2fs utility ("man - tune2fs"). To modify attributes of files and directories on ext3 - file systems, use chattr ("man chattr"). You need to be using - e2fsprogs version 1.20 or later in order to create ext3 journals - (available at <http://sourceforge.net/projects/e2fsprogs/>). - - To compile this file system support as a module, choose M here: the - module will be called ext3. - -config EXT3_DEFAULTS_TO_ORDERED - bool "Default to 'data=ordered' in ext3" - depends on EXT3_FS - default y - help - The journal mode options for ext3 have different tradeoffs - between when data is guaranteed to be on disk and - performance. The use of "data=writeback" can cause - unwritten data to appear in files after an system crash or - power failure, which can be a security issue. However, - "data=ordered" mode can also result in major performance - problems, including seconds-long delays before an fsync() - call returns. For details, see: - - http://ext4.wiki.kernel.org/index.php/Ext3_data_mode_tradeoffs - - If you have been historically happy with ext3's performance, - data=ordered mode will be a safe choice and you should - answer 'y' here. If you understand the reliability and data - privacy issues of data=writeback and are willing to make - that trade off, answer 'n'. - -config EXT3_FS_XATTR - bool "Ext3 extended attributes" - depends on EXT3_FS - default y - help - Extended attributes are name:value pairs associated with inodes by - the kernel or by users (see the attr(5) manual page, or visit - <http://acl.bestbits.at/> for details). - - If unsure, say N. - - You need this for POSIX ACL support on ext3. - -config EXT3_FS_POSIX_ACL - bool "Ext3 POSIX Access Control Lists" - depends on EXT3_FS_XATTR - select FS_POSIX_ACL - help - Posix Access Control Lists (ACLs) support permissions for users and - groups beyond the owner/group/world scheme. - - To learn more about Access Control Lists, visit the Posix ACLs for - Linux website <http://acl.bestbits.at/>. - - If you don't know what Access Control Lists are, say N - -config EXT3_FS_SECURITY - bool "Ext3 Security Labels" - depends on EXT3_FS_XATTR - help - Security labels support alternative access control models - implemented by security modules like SELinux. This option - enables an extended attribute handler for file security - labels in the ext3 filesystem. - - If you are not using a security module that requires using - extended attributes for file security labels, say N. diff --git a/fs/ext3/Makefile b/fs/ext3/Makefile deleted file mode 100644 index e77766a..0000000 --- a/fs/ext3/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Makefile for the linux ext3-filesystem routines. -# - -obj-$(CONFIG_EXT3_FS) += ext3.o - -ext3-y := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \ - ioctl.o namei.o super.o symlink.o hash.o resize.o ext3_jbd.o - -ext3-$(CONFIG_EXT3_FS_XATTR) += xattr.o xattr_user.o xattr_trusted.o -ext3-$(CONFIG_EXT3_FS_POSIX_ACL) += acl.o -ext3-$(CONFIG_EXT3_FS_SECURITY) += xattr_security.o diff --git a/fs/ext3/acl.c b/fs/ext3/acl.c deleted file mode 100644 index 8bbaf5b..0000000 --- a/fs/ext3/acl.c +++ /dev/null @@ -1,281 +0,0 @@ -/* - * linux/fs/ext3/acl.c - * - * Copyright (C) 2001-2003 Andreas Gruenbacher, <agruen@suse.de> - */ - -#include "ext3.h" -#include "xattr.h" -#include "acl.h" - -/* - * Convert from filesystem to in-memory representation. - */ -static struct posix_acl * -ext3_acl_from_disk(const void *value, size_t size) -{ - const char *end = (char *)value + size; - int n, count; - struct posix_acl *acl; - - if (!value) - return NULL; - if (size < sizeof(ext3_acl_header)) - return ERR_PTR(-EINVAL); - if (((ext3_acl_header *)value)->a_version != - cpu_to_le32(EXT3_ACL_VERSION)) - return ERR_PTR(-EINVAL); - value = (char *)value + sizeof(ext3_acl_header); - count = ext3_acl_count(size); - if (count < 0) - return ERR_PTR(-EINVAL); - if (count == 0) - return NULL; - acl = posix_acl_alloc(count, GFP_NOFS); - if (!acl) - return ERR_PTR(-ENOMEM); - for (n=0; n < count; n++) { - ext3_acl_entry *entry = - (ext3_acl_entry *)value; - if ((char *)value + sizeof(ext3_acl_entry_short) > end) - goto fail; - acl->a_entries[n].e_tag = le16_to_cpu(entry->e_tag); - acl->a_entries[n].e_perm = le16_to_cpu(entry->e_perm); - switch(acl->a_entries[n].e_tag) { - case ACL_USER_OBJ: - case ACL_GROUP_OBJ: - case ACL_MASK: - case ACL_OTHER: - value = (char *)value + - sizeof(ext3_acl_entry_short); - break; - - case ACL_USER: - value = (char *)value + sizeof(ext3_acl_entry); - if ((char *)value > end) - goto fail; - acl->a_entries[n].e_uid = - make_kuid(&init_user_ns, - le32_to_cpu(entry->e_id)); - break; - case ACL_GROUP: - value = (char *)value + sizeof(ext3_acl_entry); - if ((char *)value > end) - goto fail; - acl->a_entries[n].e_gid = - make_kgid(&init_user_ns, - le32_to_cpu(entry->e_id)); - break; - - default: - goto fail; - } - } - if (value != end) - goto fail; - return acl; - -fail: - posix_acl_release(acl); - return ERR_PTR(-EINVAL); -} - -/* - * Convert from in-memory to filesystem representation. - */ -static void * -ext3_acl_to_disk(const struct posix_acl *acl, size_t *size) -{ - ext3_acl_header *ext_acl; - char *e; - size_t n; - - *size = ext3_acl_size(acl->a_count); - ext_acl = kmalloc(sizeof(ext3_acl_header) + acl->a_count * - sizeof(ext3_acl_entry), GFP_NOFS); - if (!ext_acl) - return ERR_PTR(-ENOMEM); - ext_acl->a_version = cpu_to_le32(EXT3_ACL_VERSION); - e = (char *)ext_acl + sizeof(ext3_acl_header); - for (n=0; n < acl->a_count; n++) { - const struct posix_acl_entry *acl_e = &acl->a_entries[n]; - ext3_acl_entry *entry = (ext3_acl_entry *)e; - entry->e_tag = cpu_to_le16(acl_e->e_tag); - entry->e_perm = cpu_to_le16(acl_e->e_perm); - switch(acl_e->e_tag) { - case ACL_USER: - entry->e_id = cpu_to_le32( - from_kuid(&init_user_ns, acl_e->e_uid)); - e += sizeof(ext3_acl_entry); - break; - case ACL_GROUP: - entry->e_id = cpu_to_le32( - from_kgid(&init_user_ns, acl_e->e_gid)); - e += sizeof(ext3_acl_entry); - break; - - case ACL_USER_OBJ: - case ACL_GROUP_OBJ: - case ACL_MASK: - case ACL_OTHER: - e += sizeof(ext3_acl_entry_short); - break; - - default: - goto fail; - } - } - return (char *)ext_acl; - -fail: - kfree(ext_acl); - return ERR_PTR(-EINVAL); -} - -/* - * Inode operation get_posix_acl(). - * - * inode->i_mutex: don't care - */ -struct posix_acl * -ext3_get_acl(struct inode *inode, int type) -{ - int name_index; - char *value = NULL; - struct posix_acl *acl; - int retval; - - switch (type) { - case ACL_TYPE_ACCESS: - name_index = EXT3_XATTR_INDEX_POSIX_ACL_ACCESS; - break; - case ACL_TYPE_DEFAULT: - name_index = EXT3_XATTR_INDEX_POSIX_ACL_DEFAULT; - break; - default: - BUG(); - } - - retval = ext3_xattr_get(inode, name_index, "", NULL, 0); - if (retval > 0) { - value = kmalloc(retval, GFP_NOFS); - if (!value) - return ERR_PTR(-ENOMEM); - retval = ext3_xattr_get(inode, name_index, "", value, retval); - } - if (retval > 0) - acl = ext3_acl_from_disk(value, retval); - else if (retval == -ENODATA || retval == -ENOSYS) - acl = NULL; - else - acl = ERR_PTR(retval); - kfree(value); - - if (!IS_ERR(acl)) - set_cached_acl(inode, type, acl); - - return acl; -} - -/* - * Set the access or default ACL of an inode. - * - * inode->i_mutex: down unless called from ext3_new_inode - */ -static int -__ext3_set_acl(handle_t *handle, struct inode *inode, int type, - struct posix_acl *acl) -{ - int name_index; - void *value = NULL; - size_t size = 0; - int error; - - switch(type) { - case ACL_TYPE_ACCESS: - name_index = EXT3_XATTR_INDEX_POSIX_ACL_ACCESS; - if (acl) { - error = posix_acl_equiv_mode(acl, &inode->i_mode); - if (error < 0) - return error; - else { - inode->i_ctime = CURRENT_TIME_SEC; - ext3_mark_inode_dirty(handle, inode); - if (error == 0) - acl = NULL; - } - } - break; - - case ACL_TYPE_DEFAULT: - name_index = EXT3_XATTR_INDEX_POSIX_ACL_DEFAULT; - if (!S_ISDIR(inode->i_mode)) - return acl ? -EACCES : 0; - break; - - default: - return -EINVAL; - } - if (acl) { - value = ext3_acl_to_disk(acl, &size); - if (IS_ERR(value)) - return (int)PTR_ERR(value); - } - - error = ext3_xattr_set_handle(handle, inode, name_index, "", - value, size, 0); - - kfree(value); - - if (!error) - set_cached_acl(inode, type, acl); - - return error; -} - -int -ext3_set_acl(struct inode *inode, struct posix_acl *acl, int type) -{ - handle_t *handle; - int error, retries = 0; - -retry: - handle = ext3_journal_start(inode, EXT3_DATA_TRANS_BLOCKS(inode->i_sb)); - if (IS_ERR(handle)) - return PTR_ERR(handle); - error = __ext3_set_acl(handle, inode, type, acl); - ext3_journal_stop(handle); - if (error == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries)) - goto retry; - return error; -} - -/* - * Initialize the ACLs of a new inode. Called from ext3_new_inode. - * - * dir->i_mutex: down - * inode->i_mutex: up (access to inode is still exclusive) - */ -int -ext3_init_acl(handle_t *handle, struct inode *inode, struct inode *dir) -{ - struct posix_acl *default_acl, *acl; - int error; - - error = posix_acl_create(dir, &inode->i_mode, &default_acl, &acl); - if (error) - return error; - - if (default_acl) { - error = __ext3_set_acl(handle, inode, ACL_TYPE_DEFAULT, - default_acl); - posix_acl_release(default_acl); - } - if (acl) { - if (!error) - error = __ext3_set_acl(handle, inode, ACL_TYPE_ACCESS, - acl); - posix_acl_release(acl); - } - return error; -} diff --git a/fs/ext3/acl.h b/fs/ext3/acl.h deleted file mode 100644 index ea1c69e..0000000 --- a/fs/ext3/acl.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - File: fs/ext3/acl.h - - (C) 2001 Andreas Gruenbacher, <a.gruenbacher@computer.org> -*/ - -#include <linux/posix_acl_xattr.h> - -#define EXT3_ACL_VERSION 0x0001 - -typedef struct { - __le16 e_tag; - __le16 e_perm; - __le32 e_id; -} ext3_acl_entry; - -typedef struct { - __le16 e_tag; - __le16 e_perm; -} ext3_acl_entry_short; - -typedef struct { - __le32 a_version; -} ext3_acl_header; - -static inline size_t ext3_acl_size(int count) -{ - if (count <= 4) { - return sizeof(ext3_acl_header) + - count * sizeof(ext3_acl_entry_short); - } else { - return sizeof(ext3_acl_header) + - 4 * sizeof(ext3_acl_entry_short) + - (count - 4) * sizeof(ext3_acl_entry); - } -} - -static inline int ext3_acl_count(size_t size) -{ - ssize_t s; - size -= sizeof(ext3_acl_header); - s = size - 4 * sizeof(ext3_acl_entry_short); - if (s < 0) { - if (size % sizeof(ext3_acl_entry_short)) - return -1; - return size / sizeof(ext3_acl_entry_short); - } else { - if (s % sizeof(ext3_acl_entry)) - return -1; - return s / sizeof(ext3_acl_entry) + 4; - } -} - -#ifdef CONFIG_EXT3_FS_POSIX_ACL - -/* acl.c */ -extern struct posix_acl *ext3_get_acl(struct inode *inode, int type); -extern int ext3_set_acl(struct inode *inode, struct posix_acl *acl, int type); -extern int ext3_init_acl (handle_t *, struct inode *, struct inode *); - -#else /* CONFIG_EXT3_FS_POSIX_ACL */ -#include <linux/sched.h> -#define ext3_get_acl NULL -#define ext3_set_acl NULL - -static inline int -ext3_init_acl(handle_t *handle, struct inode *inode, struct inode *dir) -{ - return 0; -} -#endif /* CONFIG_EXT3_FS_POSIX_ACL */ - diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c deleted file mode 100644 index 158b5d4..0000000 --- a/fs/ext3/balloc.c +++ /dev/null @@ -1,2158 +0,0 @@ -/* - * linux/fs/ext3/balloc.c - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * Enhanced block allocation by Stephen Tweedie (sct@redhat.com), 1993 - * Big-endian to little-endian byte-swapping/bitmaps by - * David S. Miller (davem@caip.rutgers.edu), 1995 - */ - -#include <linux/quotaops.h> -#include <linux/blkdev.h> -#include "ext3.h" - -/* - * balloc.c contains the blocks allocation and deallocation routines - */ - -/* - * The free blocks are managed by bitmaps. A file system contains several - * blocks groups. Each group contains 1 bitmap block for blocks, 1 bitmap - * block for inodes, N blocks for the inode table and data blocks. - * - * The file system contains group descriptors which are located after the - * super block. Each descriptor contains the number of the bitmap block and - * the free blocks count in the block. The descriptors are loaded in memory - * when a file system is mounted (see ext3_fill_super). - */ - - -#define in_range(b, first, len) ((b) >= (first) && (b) <= (first) + (len) - 1) - -/* - * Calculate the block group number and offset, given a block number - */ -static void ext3_get_group_no_and_offset(struct super_block *sb, - ext3_fsblk_t blocknr, unsigned long *blockgrpp, ext3_grpblk_t *offsetp) -{ - struct ext3_super_block *es = EXT3_SB(sb)->s_es; - - blocknr = blocknr - le32_to_cpu(es->s_first_data_block); - if (offsetp) - *offsetp = blocknr % EXT3_BLOCKS_PER_GROUP(sb); - if (blockgrpp) - *blockgrpp = blocknr / EXT3_BLOCKS_PER_GROUP(sb); -} - -/** - * ext3_get_group_desc() -- load group descriptor from disk - * @sb: super block - * @block_group: given block group - * @bh: pointer to the buffer head to store the block - * group descriptor - */ -struct ext3_group_desc * ext3_get_group_desc(struct super_block * sb, - unsigned int block_group, - struct buffer_head ** bh) -{ - unsigned long group_desc; - unsigned long offset; - struct ext3_group_desc * desc; - struct ext3_sb_info *sbi = EXT3_SB(sb); - - if (block_group >= sbi->s_groups_count) { - ext3_error (sb, "ext3_get_group_desc", - "block_group >= groups_count - " - "block_group = %d, groups_count = %lu", - block_group, sbi->s_groups_count); - - return NULL; - } - smp_rmb(); - - group_desc = block_group >> EXT3_DESC_PER_BLOCK_BITS(sb); - offset = block_group & (EXT3_DESC_PER_BLOCK(sb) - 1); - if (!sbi->s_group_desc[group_desc]) { - ext3_error (sb, "ext3_get_group_desc", - "Group descriptor not loaded - " - "block_group = %d, group_desc = %lu, desc = %lu", - block_group, group_desc, offset); - return NULL; - } - - desc = (struct ext3_group_desc *) sbi->s_group_desc[group_desc]->b_data; - if (bh) - *bh = sbi->s_group_desc[group_desc]; - return desc + offset; -} - -static int ext3_valid_block_bitmap(struct super_block *sb, - struct ext3_group_desc *desc, - unsigned int block_group, - struct buffer_head *bh) -{ - ext3_grpblk_t offset; - ext3_grpblk_t next_zero_bit; - ext3_fsblk_t bitmap_blk; - ext3_fsblk_t group_first_block; - - group_first_block = ext3_group_first_block_no(sb, block_group); - - /* check whether block bitmap block number is set */ - bitmap_blk = le32_to_cpu(desc->bg_block_bitmap); - offset = bitmap_blk - group_first_block; - if (!ext3_test_bit(offset, bh->b_data)) - /* bad block bitmap */ - goto err_out; - - /* check whether the inode bitmap block number is set */ - bitmap_blk = le32_to_cpu(desc->bg_inode_bitmap); - offset = bitmap_blk - group_first_block; - if (!ext3_test_bit(offset, bh->b_data)) - /* bad block bitmap */ - goto err_out; - - /* check whether the inode table block number is set */ - bitmap_blk = le32_to_cpu(desc->bg_inode_table); - offset = bitmap_blk - group_first_block; - next_zero_bit = ext3_find_next_zero_bit(bh->b_data, - offset + EXT3_SB(sb)->s_itb_per_group, - offset); - if (next_zero_bit >= offset + EXT3_SB(sb)->s_itb_per_group) - /* good bitmap for inode tables */ - return 1; - -err_out: - ext3_error(sb, __func__, - "Invalid block bitmap - " - "block_group = %d, block = %lu", - block_group, bitmap_blk); - return 0; -} - -/** - * read_block_bitmap() - * @sb: super block - * @block_group: given block group - * - * Read the bitmap for a given block_group,and validate the - * bits for block/inode/inode tables are set in the bitmaps - * - * Return buffer_head on success or NULL in case of failure. - */ -static struct buffer_head * -read_block_bitmap(struct super_block *sb, unsigned int block_group) -{ - struct ext3_group_desc * desc; - struct buffer_head * bh = NULL; - ext3_fsblk_t bitmap_blk; - - desc = ext3_get_group_desc(sb, block_group, NULL); - if (!desc) - return NULL; - trace_ext3_read_block_bitmap(sb, block_group); - bitmap_blk = le32_to_cpu(desc->bg_block_bitmap); - bh = sb_getblk(sb, bitmap_blk); - if (unlikely(!bh)) { - ext3_error(sb, __func__, - "Cannot read block bitmap - " - "block_group = %d, block_bitmap = %u", - block_group, le32_to_cpu(desc->bg_block_bitmap)); - return NULL; - } - if (likely(bh_uptodate_or_lock(bh))) - return bh; - - if (bh_submit_read(bh) < 0) { - brelse(bh); - ext3_error(sb, __func__, - "Cannot read block bitmap - " - "block_group = %d, block_bitmap = %u", - block_group, le32_to_cpu(desc->bg_block_bitmap)); - return NULL; - } - ext3_valid_block_bitmap(sb, desc, block_group, bh); - /* - * file system mounted not to panic on error, continue with corrupt - * bitmap - */ - return bh; -} -/* - * The reservation window structure operations - * -------------------------------------------- - * Operations include: - * dump, find, add, remove, is_empty, find_next_reservable_window, etc. - * - * We use a red-black tree to represent per-filesystem reservation - * windows. - * - */ - -/** - * __rsv_window_dump() -- Dump the filesystem block allocation reservation map - * @rb_root: root of per-filesystem reservation rb tree - * @verbose: verbose mode - * @fn: function which wishes to dump the reservation map - * - * If verbose is turned on, it will print the whole block reservation - * windows(start, end). Otherwise, it will only print out the "bad" windows, - * those windows that overlap with their immediate neighbors. - */ -#if 1 -static void __rsv_window_dump(struct rb_root *root, int verbose, - const char *fn) -{ - struct rb_node *n; - struct ext3_reserve_window_node *rsv, *prev; - int bad; - -restart: - n = rb_first(root); - bad = 0; - prev = NULL; - - printk("Block Allocation Reservation Windows Map (%s):\n", fn); - while (n) { - rsv = rb_entry(n, struct ext3_reserve_window_node, rsv_node); - if (verbose) - printk("reservation window 0x%p " - "start: %lu, end: %lu\n", - rsv, rsv->rsv_start, rsv->rsv_end); - if (rsv->rsv_start && rsv->rsv_start >= rsv->rsv_end) { - printk("Bad reservation %p (start >= end)\n", - rsv); - bad = 1; - } - if (prev && prev->rsv_end >= rsv->rsv_start) { - printk("Bad reservation %p (prev->end >= start)\n", - rsv); - bad = 1; - } - if (bad) { - if (!verbose) { - printk("Restarting reservation walk in verbose mode\n"); - verbose = 1; - goto restart; - } - } - n = rb_next(n); - prev = rsv; - } - printk("Window map complete.\n"); - BUG_ON(bad); -} -#define rsv_window_dump(root, verbose) \ - __rsv_window_dump((root), (verbose), __func__) -#else -#define rsv_window_dump(root, verbose) do {} while (0) -#endif - -/** - * goal_in_my_reservation() - * @rsv: inode's reservation window - * @grp_goal: given goal block relative to the allocation block group - * @group: the current allocation block group - * @sb: filesystem super block - * - * Test if the given goal block (group relative) is within the file's - * own block reservation window range. - * - * If the reservation window is outside the goal allocation group, return 0; - * grp_goal (given goal block) could be -1, which means no specific - * goal block. In this case, always return 1. - * If the goal block is within the reservation window, return 1; - * otherwise, return 0; - */ -static int -goal_in_my_reservation(struct ext3_reserve_window *rsv, ext3_grpblk_t grp_goal, - unsigned int group, struct super_block * sb) -{ - ext3_fsblk_t group_first_block, group_last_block; - - group_first_block = ext3_group_first_block_no(sb, group); - group_last_block = group_first_block + (EXT3_BLOCKS_PER_GROUP(sb) - 1); - - if ((rsv->_rsv_start > group_last_block) || - (rsv->_rsv_end < group_first_block)) - return 0; - if ((grp_goal >= 0) && ((grp_goal + group_first_block < rsv->_rsv_start) - || (grp_goal + group_first_block > rsv->_rsv_end))) - return 0; - return 1; -} - -/** - * search_reserve_window() - * @rb_root: root of reservation tree - * @goal: target allocation block - * - * Find the reserved window which includes the goal, or the previous one - * if the goal is not in any window. - * Returns NULL if there are no windows or if all windows start after the goal. - */ -static struct ext3_reserve_window_node * -search_reserve_window(struct rb_root *root, ext3_fsblk_t goal) -{ - struct rb_node *n = root->rb_node; - struct ext3_reserve_window_node *rsv; - - if (!n) - return NULL; - - do { - rsv = rb_entry(n, struct ext3_reserve_window_node, rsv_node); - - if (goal < rsv->rsv_start) - n = n->rb_left; - else if (goal > rsv->rsv_end) - n = n->rb_right; - else - return rsv; - } while (n); - /* - * We've fallen off the end of the tree: the goal wasn't inside - * any particular node. OK, the previous node must be to one - * side of the interval containing the goal. If it's the RHS, - * we need to back up one. - */ - if (rsv->rsv_start > goal) { - n = rb_prev(&rsv->rsv_node); - rsv = rb_entry(n, struct ext3_reserve_window_node, rsv_node); - } - return rsv; -} - -/** - * ext3_rsv_window_add() -- Insert a window to the block reservation rb tree. - * @sb: super block - * @rsv: reservation window to add - * - * Must be called with rsv_lock hold. - */ -void ext3_rsv_window_add(struct super_block *sb, - struct ext3_reserve_window_node *rsv) -{ - struct rb_root *root = &EXT3_SB(sb)->s_rsv_window_root; - struct rb_node *node = &rsv->rsv_node; - ext3_fsblk_t start = rsv->rsv_start; - - struct rb_node ** p = &root->rb_node; - struct rb_node * parent = NULL; - struct ext3_reserve_window_node *this; - - trace_ext3_rsv_window_add(sb, rsv); - while (*p) - { - parent = *p; - this = rb_entry(parent, struct ext3_reserve_window_node, rsv_node); - - if (start < this->rsv_start) - p = &(*p)->rb_left; - else if (start > this->rsv_end) - p = &(*p)->rb_right; - else { - rsv_window_dump(root, 1); - BUG(); - } - } - - rb_link_node(node, parent, p); - rb_insert_color(node, root); -} - -/** - * ext3_rsv_window_remove() -- unlink a window from the reservation rb tree - * @sb: super block - * @rsv: reservation window to remove - * - * Mark the block reservation window as not allocated, and unlink it - * from the filesystem reservation window rb tree. Must be called with - * rsv_lock hold. - */ -static void rsv_window_remove(struct super_block *sb, - struct ext3_reserve_window_node *rsv) -{ - rsv->rsv_start = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; - rsv->rsv_end = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; - rsv->rsv_alloc_hit = 0; - rb_erase(&rsv->rsv_node, &EXT3_SB(sb)->s_rsv_window_root); -} - -/* - * rsv_is_empty() -- Check if the reservation window is allocated. - * @rsv: given reservation window to check - * - * returns 1 if the end block is EXT3_RESERVE_WINDOW_NOT_ALLOCATED. - */ -static inline int rsv_is_empty(struct ext3_reserve_window *rsv) -{ - /* a valid reservation end block could not be 0 */ - return rsv->_rsv_end == EXT3_RESERVE_WINDOW_NOT_ALLOCATED; -} - -/** - * ext3_init_block_alloc_info() - * @inode: file inode structure - * - * Allocate and initialize the reservation window structure, and - * link the window to the ext3 inode structure at last - * - * The reservation window structure is only dynamically allocated - * and linked to ext3 inode the first time the open file - * needs a new block. So, before every ext3_new_block(s) call, for - * regular files, we should check whether the reservation window - * structure exists or not. In the latter case, this function is called. - * Fail to do so will result in block reservation being turned off for that - * open file. - * - * This function is called from ext3_get_blocks_handle(), also called - * when setting the reservation window size through ioctl before the file - * is open for write (needs block allocation). - * - * Needs truncate_mutex protection prior to call this function. - */ -void ext3_init_block_alloc_info(struct inode *inode) -{ - struct ext3_inode_info *ei = EXT3_I(inode); - struct ext3_block_alloc_info *block_i; - struct super_block *sb = inode->i_sb; - - block_i = kmalloc(sizeof(*block_i), GFP_NOFS); - if (block_i) { - struct ext3_reserve_window_node *rsv = &block_i->rsv_window_node; - - rsv->rsv_start = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; - rsv->rsv_end = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; - - /* - * if filesystem is mounted with NORESERVATION, the goal - * reservation window size is set to zero to indicate - * block reservation is off - */ - if (!test_opt(sb, RESERVATION)) - rsv->rsv_goal_size = 0; - else - rsv->rsv_goal_size = EXT3_DEFAULT_RESERVE_BLOCKS; - rsv->rsv_alloc_hit = 0; - block_i->last_alloc_logical_block = 0; - block_i->last_alloc_physical_block = 0; - } - ei->i_block_alloc_info = block_i; -} - -/** - * ext3_discard_reservation() - * @inode: inode - * - * Discard(free) block reservation window on last file close, or truncate - * or at last iput(). - * - * It is being called in three cases: - * ext3_release_file(): last writer close the file - * ext3_clear_inode(): last iput(), when nobody link to this file. - * ext3_truncate(): when the block indirect map is about to change. - * - */ -void ext3_discard_reservation(struct inode *inode) -{ - struct ext3_inode_info *ei = EXT3_I(inode); - struct ext3_block_alloc_info *block_i = ei->i_block_alloc_info; - struct ext3_reserve_window_node *rsv; - spinlock_t *rsv_lock = &EXT3_SB(inode->i_sb)->s_rsv_window_lock; - - if (!block_i) - return; - - rsv = &block_i->rsv_window_node; - if (!rsv_is_empty(&rsv->rsv_window)) { - spin_lock(rsv_lock); - if (!rsv_is_empty(&rsv->rsv_window)) { - trace_ext3_discard_reservation(inode, rsv); - rsv_window_remove(inode->i_sb, rsv); - } - spin_unlock(rsv_lock); - } -} - -/** - * ext3_free_blocks_sb() -- Free given blocks and update quota - * @handle: handle to this transaction - * @sb: super block - * @block: start physical block to free - * @count: number of blocks to free - * @pdquot_freed_blocks: pointer to quota - */ -void ext3_free_blocks_sb(handle_t *handle, struct super_block *sb, - ext3_fsblk_t block, unsigned long count, - unsigned long *pdquot_freed_blocks) -{ - struct buffer_head *bitmap_bh = NULL; - struct buffer_head *gd_bh; - unsigned long block_group; - ext3_grpblk_t bit; - unsigned long i; - unsigned long overflow; - struct ext3_group_desc * desc; - struct ext3_super_block * es; - struct ext3_sb_info *sbi; - int err = 0, ret; - ext3_grpblk_t group_freed; - - *pdquot_freed_blocks = 0; - sbi = EXT3_SB(sb); - es = sbi->s_es; - if (block < le32_to_cpu(es->s_first_data_block) || - block + count < block || - block + count > le32_to_cpu(es->s_blocks_count)) { - ext3_error (sb, "ext3_free_blocks", - "Freeing blocks not in datazone - " - "block = "E3FSBLK", count = %lu", block, count); - goto error_return; - } - - ext3_debug ("freeing block(s) %lu-%lu\n", block, block + count - 1); - -do_more: - overflow = 0; - block_group = (block - le32_to_cpu(es->s_first_data_block)) / - EXT3_BLOCKS_PER_GROUP(sb); - bit = (block - le32_to_cpu(es->s_first_data_block)) % - EXT3_BLOCKS_PER_GROUP(sb); - /* - * Check to see if we are freeing blocks across a group - * boundary. - */ - if (bit + count > EXT3_BLOCKS_PER_GROUP(sb)) { - overflow = bit + count - EXT3_BLOCKS_PER_GROUP(sb); - count -= overflow; - } - brelse(bitmap_bh); - bitmap_bh = read_block_bitmap(sb, block_group); - if (!bitmap_bh) - goto error_return; - desc = ext3_get_group_desc (sb, block_group, &gd_bh); - if (!desc) - goto error_return; - - if (in_range (le32_to_cpu(desc->bg_block_bitmap), block, count) || - in_range (le32_to_cpu(desc->bg_inode_bitmap), block, count) || - in_range (block, le32_to_cpu(desc->bg_inode_table), - sbi->s_itb_per_group) || - in_range (block + count - 1, le32_to_cpu(desc->bg_inode_table), - sbi->s_itb_per_group)) { - ext3_error (sb, "ext3_free_blocks", - "Freeing blocks in system zones - " - "Block = "E3FSBLK", count = %lu", - block, count); - goto error_return; - } - - /* - * We are about to start releasing blocks in the bitmap, - * so we need undo access. - */ - /* @@@ check errors */ - BUFFER_TRACE(bitmap_bh, "getting undo access"); - err = ext3_journal_get_undo_access(handle, bitmap_bh); - if (err) - goto error_return; - - /* - * We are about to modify some metadata. Call the journal APIs - * to unshare ->b_data if a currently-committing transaction is - * using it - */ - BUFFER_TRACE(gd_bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, gd_bh); - if (err) - goto error_return; - - jbd_lock_bh_state(bitmap_bh); - - for (i = 0, group_freed = 0; i < count; i++) { - /* - * An HJ special. This is expensive... - */ -#ifdef CONFIG_JBD_DEBUG - jbd_unlock_bh_state(bitmap_bh); - { - struct buffer_head *debug_bh; - debug_bh = sb_find_get_block(sb, block + i); - if (debug_bh) { - BUFFER_TRACE(debug_bh, "Deleted!"); - if (!bh2jh(bitmap_bh)->b_committed_data) - BUFFER_TRACE(debug_bh, - "No committed data in bitmap"); - BUFFER_TRACE2(debug_bh, bitmap_bh, "bitmap"); - __brelse(debug_bh); - } - } - jbd_lock_bh_state(bitmap_bh); -#endif - if (need_resched()) { - jbd_unlock_bh_state(bitmap_bh); - cond_resched(); - jbd_lock_bh_state(bitmap_bh); - } - /* @@@ This prevents newly-allocated data from being - * freed and then reallocated within the same - * transaction. - * - * Ideally we would want to allow that to happen, but to - * do so requires making journal_forget() capable of - * revoking the queued write of a data block, which - * implies blocking on the journal lock. *forget() - * cannot block due to truncate races. - * - * Eventually we can fix this by making journal_forget() - * return a status indicating whether or not it was able - * to revoke the buffer. On successful revoke, it is - * safe not to set the allocation bit in the committed - * bitmap, because we know that there is no outstanding - * activity on the buffer any more and so it is safe to - * reallocate it. - */ - BUFFER_TRACE(bitmap_bh, "set in b_committed_data"); - J_ASSERT_BH(bitmap_bh, - bh2jh(bitmap_bh)->b_committed_data != NULL); - ext3_set_bit_atomic(sb_bgl_lock(sbi, block_group), bit + i, - bh2jh(bitmap_bh)->b_committed_data); - - /* - * We clear the bit in the bitmap after setting the committed - * data bit, because this is the reverse order to that which - * the allocator uses. - */ - BUFFER_TRACE(bitmap_bh, "clear bit"); - if (!ext3_clear_bit_atomic(sb_bgl_lock(sbi, block_group), - bit + i, bitmap_bh->b_data)) { - jbd_unlock_bh_state(bitmap_bh); - ext3_error(sb, __func__, - "bit already cleared for block "E3FSBLK, - block + i); - jbd_lock_bh_state(bitmap_bh); - BUFFER_TRACE(bitmap_bh, "bit already cleared"); - } else { - group_freed++; - } - } - jbd_unlock_bh_state(bitmap_bh); - - spin_lock(sb_bgl_lock(sbi, block_group)); - le16_add_cpu(&desc->bg_free_blocks_count, group_freed); - spin_unlock(sb_bgl_lock(sbi, block_group)); - percpu_counter_add(&sbi->s_freeblocks_counter, count); - - /* We dirtied the bitmap block */ - BUFFER_TRACE(bitmap_bh, "dirtied bitmap block"); - err = ext3_journal_dirty_metadata(handle, bitmap_bh); - - /* And the group descriptor block */ - BUFFER_TRACE(gd_bh, "dirtied group descriptor block"); - ret = ext3_journal_dirty_metadata(handle, gd_bh); - if (!err) err = ret; - *pdquot_freed_blocks += group_freed; - - if (overflow && !err) { - block += count; - count = overflow; - goto do_more; - } - -error_return: - brelse(bitmap_bh); - ext3_std_error(sb, err); - return; -} - -/** - * ext3_free_blocks() -- Free given blocks and update quota - * @handle: handle for this transaction - * @inode: inode - * @block: start physical block to free - * @count: number of blocks to count - */ -void ext3_free_blocks(handle_t *handle, struct inode *inode, - ext3_fsblk_t block, unsigned long count) -{ - struct super_block *sb = inode->i_sb; - unsigned long dquot_freed_blocks; - - trace_ext3_free_blocks(inode, block, count); - ext3_free_blocks_sb(handle, sb, block, count, &dquot_freed_blocks); - if (dquot_freed_blocks) - dquot_free_block(inode, dquot_freed_blocks); - return; -} - -/** - * ext3_test_allocatable() - * @nr: given allocation block group - * @bh: bufferhead contains the bitmap of the given block group - * - * For ext3 allocations, we must not reuse any blocks which are - * allocated in the bitmap buffer's "last committed data" copy. This - * prevents deletes from freeing up the page for reuse until we have - * committed the delete transaction. - * - * If we didn't do this, then deleting something and reallocating it as - * data would allow the old block to be overwritten before the - * transaction committed (because we force data to disk before commit). - * This would lead to corruption if we crashed between overwriting the - * data and committing the delete. - * - * @@@ We may want to make this allocation behaviour conditional on - * data-writes at some point, and disable it for metadata allocations or - * sync-data inodes. - */ -static int ext3_test_allocatable(ext3_grpblk_t nr, struct buffer_head *bh) -{ - int ret; - struct journal_head *jh = bh2jh(bh); - - if (ext3_test_bit(nr, bh->b_data)) - return 0; - - jbd_lock_bh_state(bh); - if (!jh->b_committed_data) - ret = 1; - else - ret = !ext3_test_bit(nr, jh->b_committed_data); - jbd_unlock_bh_state(bh); - return ret; -} - -/** - * bitmap_search_next_usable_block() - * @start: the starting block (group relative) of the search - * @bh: bufferhead contains the block group bitmap - * @maxblocks: the ending block (group relative) of the reservation - * - * The bitmap search --- search forward alternately through the actual - * bitmap on disk and the last-committed copy in journal, until we find a - * bit free in both bitmaps. - */ -static ext3_grpblk_t -bitmap_search_next_usable_block(ext3_grpblk_t start, struct buffer_head *bh, - ext3_grpblk_t maxblocks) -{ - ext3_grpblk_t next; - struct journal_head *jh = bh2jh(bh); - - while (start < maxblocks) { - next = ext3_find_next_zero_bit(bh->b_data, maxblocks, start); - if (next >= maxblocks) - return -1; - if (ext3_test_allocatable(next, bh)) - return next; - jbd_lock_bh_state(bh); - if (jh->b_committed_data) - start = ext3_find_next_zero_bit(jh->b_committed_data, - maxblocks, next); - jbd_unlock_bh_state(bh); - } - return -1; -} - -/** - * find_next_usable_block() - * @start: the starting block (group relative) to find next - * allocatable block in bitmap. - * @bh: bufferhead contains the block group bitmap - * @maxblocks: the ending block (group relative) for the search - * - * Find an allocatable block in a bitmap. We honor both the bitmap and - * its last-committed copy (if that exists), and perform the "most - * appropriate allocation" algorithm of looking for a free block near - * the initial goal; then for a free byte somewhere in the bitmap; then - * for any free bit in the bitmap. - */ -static ext3_grpblk_t -find_next_usable_block(ext3_grpblk_t start, struct buffer_head *bh, - ext3_grpblk_t maxblocks) -{ - ext3_grpblk_t here, next; - char *p, *r; - - if (start > 0) { - /* - * The goal was occupied; search forward for a free - * block within the next XX blocks. - * - * end_goal is more or less random, but it has to be - * less than EXT3_BLOCKS_PER_GROUP. Aligning up to the - * next 64-bit boundary is simple.. - */ - ext3_grpblk_t end_goal = (start + 63) & ~63; - if (end_goal > maxblocks) - end_goal = maxblocks; - here = ext3_find_next_zero_bit(bh->b_data, end_goal, start); - if (here < end_goal && ext3_test_allocatable(here, bh)) - return here; - ext3_debug("Bit not found near goal\n"); - } - - here = start; - if (here < 0) - here = 0; - - p = bh->b_data + (here >> 3); - r = memscan(p, 0, ((maxblocks + 7) >> 3) - (here >> 3)); - next = (r - bh->b_data) << 3; - - if (next < maxblocks && next >= start && ext3_test_allocatable(next, bh)) - return next; - - /* - * The bitmap search --- search forward alternately through the actual - * bitmap and the last-committed copy until we find a bit free in - * both - */ - here = bitmap_search_next_usable_block(here, bh, maxblocks); - return here; -} - -/** - * claim_block() - * @lock: the spin lock for this block group - * @block: the free block (group relative) to allocate - * @bh: the buffer_head contains the block group bitmap - * - * We think we can allocate this block in this bitmap. Try to set the bit. - * If that succeeds then check that nobody has allocated and then freed the - * block since we saw that is was not marked in b_committed_data. If it _was_ - * allocated and freed then clear the bit in the bitmap again and return - * zero (failure). - */ -static inline int -claim_block(spinlock_t *lock, ext3_grpblk_t block, struct buffer_head *bh) -{ - struct journal_head *jh = bh2jh(bh); - int ret; - - if (ext3_set_bit_atomic(lock, block, bh->b_data)) - return 0; - jbd_lock_bh_state(bh); - if (jh->b_committed_data && ext3_test_bit(block,jh->b_committed_data)) { - ext3_clear_bit_atomic(lock, block, bh->b_data); - ret = 0; - } else { - ret = 1; - } - jbd_unlock_bh_state(bh); - return ret; -} - -/** - * ext3_try_to_allocate() - * @sb: superblock - * @handle: handle to this transaction - * @group: given allocation block group - * @bitmap_bh: bufferhead holds the block bitmap - * @grp_goal: given target block within the group - * @count: target number of blocks to allocate - * @my_rsv: reservation window - * - * Attempt to allocate blocks within a give range. Set the range of allocation - * first, then find the first free bit(s) from the bitmap (within the range), - * and at last, allocate the blocks by claiming the found free bit as allocated. - * - * To set the range of this allocation: - * if there is a reservation window, only try to allocate block(s) from the - * file's own reservation window; - * Otherwise, the allocation range starts from the give goal block, ends at - * the block group's last block. - * - * If we failed to allocate the desired block then we may end up crossing to a - * new bitmap. In that case we must release write access to the old one via - * ext3_journal_release_buffer(), else we'll run out of credits. - */ -static ext3_grpblk_t -ext3_try_to_allocate(struct super_block *sb, handle_t *handle, int group, - struct buffer_head *bitmap_bh, ext3_grpblk_t grp_goal, - unsigned long *count, struct ext3_reserve_window *my_rsv) -{ - ext3_fsblk_t group_first_block; - ext3_grpblk_t start, end; - unsigned long num = 0; - - /* we do allocation within the reservation window if we have a window */ - if (my_rsv) { - group_first_block = ext3_group_first_block_no(sb, group); - if (my_rsv->_rsv_start >= group_first_block) - start = my_rsv->_rsv_start - group_first_block; - else - /* reservation window cross group boundary */ - start = 0; - end = my_rsv->_rsv_end - group_first_block + 1; - if (end > EXT3_BLOCKS_PER_GROUP(sb)) - /* reservation window crosses group boundary */ - end = EXT3_BLOCKS_PER_GROUP(sb); - if ((start <= grp_goal) && (grp_goal < end)) - start = grp_goal; - else - grp_goal = -1; - } else { - if (grp_goal > 0) - start = grp_goal; - else - start = 0; - end = EXT3_BLOCKS_PER_GROUP(sb); - } - - BUG_ON(start > EXT3_BLOCKS_PER_GROUP(sb)); - -repeat: - if (grp_goal < 0 || !ext3_test_allocatable(grp_goal, bitmap_bh)) { - grp_goal = find_next_usable_block(start, bitmap_bh, end); - if (grp_goal < 0) - goto fail_access; - if (!my_rsv) { - int i; - - for (i = 0; i < 7 && grp_goal > start && - ext3_test_allocatable(grp_goal - 1, - bitmap_bh); - i++, grp_goal--) - ; - } - } - start = grp_goal; - - if (!claim_block(sb_bgl_lock(EXT3_SB(sb), group), - grp_goal, bitmap_bh)) { - /* - * The block was allocated by another thread, or it was - * allocated and then freed by another thread - */ - start++; - grp_goal++; - if (start >= end) - goto fail_access; - goto repeat; - } - num++; - grp_goal++; - while (num < *count && grp_goal < end - && ext3_test_allocatable(grp_goal, bitmap_bh) - && claim_block(sb_bgl_lock(EXT3_SB(sb), group), - grp_goal, bitmap_bh)) { - num++; - grp_goal++; - } - *count = num; - return grp_goal - num; -fail_access: - *count = num; - return -1; -} - -/** - * find_next_reservable_window(): - * find a reservable space within the given range. - * It does not allocate the reservation window for now: - * alloc_new_reservation() will do the work later. - * - * @search_head: the head of the searching list; - * This is not necessarily the list head of the whole filesystem - * - * We have both head and start_block to assist the search - * for the reservable space. The list starts from head, - * but we will shift to the place where start_block is, - * then start from there, when looking for a reservable space. - * - * @my_rsv: the reservation window - * - * @sb: the super block - * - * @start_block: the first block we consider to start - * the real search from - * - * @last_block: - * the maximum block number that our goal reservable space - * could start from. This is normally the last block in this - * group. The search will end when we found the start of next - * possible reservable space is out of this boundary. - * This could handle the cross boundary reservation window - * request. - * - * basically we search from the given range, rather than the whole - * reservation double linked list, (start_block, last_block) - * to find a free region that is of my size and has not - * been reserved. - * - */ -static int find_next_reservable_window( - struct ext3_reserve_window_node *search_head, - struct ext3_reserve_window_node *my_rsv, - struct super_block * sb, - ext3_fsblk_t start_block, - ext3_fsblk_t last_block) -{ - struct rb_node *next; - struct ext3_reserve_window_node *rsv, *prev; - ext3_fsblk_t cur; - int size = my_rsv->rsv_goal_size; - - /* TODO: make the start of the reservation window byte-aligned */ - /* cur = *start_block & ~7;*/ - cur = start_block; - rsv = search_head; - if (!rsv) - return -1; - - while (1) { - if (cur <= rsv->rsv_end) - cur = rsv->rsv_end + 1; - - /* TODO? - * in the case we could not find a reservable space - * that is what is expected, during the re-search, we could - * remember what's the largest reservable space we could have - * and return that one. - * - * For now it will fail if we could not find the reservable - * space with expected-size (or more)... - */ - if (cur > last_block) - return -1; /* fail */ - - prev = rsv; - next = rb_next(&rsv->rsv_node); - rsv = rb_entry(next,struct ext3_reserve_window_node,rsv_node); - - /* - * Reached the last reservation, we can just append to the - * previous one. - */ - if (!next) - break; - - if (cur + size <= rsv->rsv_start) { - /* - * Found a reserveable space big enough. We could - * have a reservation across the group boundary here - */ - break; - } - } - /* - * we come here either : - * when we reach the end of the whole list, - * and there is empty reservable space after last entry in the list. - * append it to the end of the list. - * - * or we found one reservable space in the middle of the list, - * return the reservation window that we could append to. - * succeed. - */ - - if ((prev != my_rsv) && (!rsv_is_empty(&my_rsv->rsv_window))) - rsv_window_remove(sb, my_rsv); - - /* - * Let's book the whole available window for now. We will check the - * disk bitmap later and then, if there are free blocks then we adjust - * the window size if it's larger than requested. - * Otherwise, we will remove this node from the tree next time - * call find_next_reservable_window. - */ - my_rsv->rsv_start = cur; - my_rsv->rsv_end = cur + size - 1; - my_rsv->rsv_alloc_hit = 0; - - if (prev != my_rsv) - ext3_rsv_window_add(sb, my_rsv); - - return 0; -} - -/** - * alloc_new_reservation()--allocate a new reservation window - * - * To make a new reservation, we search part of the filesystem - * reservation list (the list that inside the group). We try to - * allocate a new reservation window near the allocation goal, - * or the beginning of the group, if there is no goal. - * - * We first find a reservable space after the goal, then from - * there, we check the bitmap for the first free block after - * it. If there is no free block until the end of group, then the - * whole group is full, we failed. Otherwise, check if the free - * block is inside the expected reservable space, if so, we - * succeed. - * If the first free block is outside the reservable space, then - * start from the first free block, we search for next available - * space, and go on. - * - * on succeed, a new reservation will be found and inserted into the list - * It contains at least one free block, and it does not overlap with other - * reservation windows. - * - * failed: we failed to find a reservation window in this group - * - * @my_rsv: the reservation window - * - * @grp_goal: The goal (group-relative). It is where the search for a - * free reservable space should start from. - * if we have a grp_goal(grp_goal >0 ), then start from there, - * no grp_goal(grp_goal = -1), we start from the first block - * of the group. - * - * @sb: the super block - * @group: the group we are trying to allocate in - * @bitmap_bh: the block group block bitmap - * - */ -static int alloc_new_reservation(struct ext3_reserve_window_node *my_rsv, - ext3_grpblk_t grp_goal, struct super_block *sb, - unsigned int group, struct buffer_head *bitmap_bh) -{ - struct ext3_reserve_window_node *search_head; - ext3_fsblk_t group_first_block, group_end_block, start_block; - ext3_grpblk_t first_free_block; - struct rb_root *fs_rsv_root = &EXT3_SB(sb)->s_rsv_window_root; - unsigned long size; - int ret; - spinlock_t *rsv_lock = &EXT3_SB(sb)->s_rsv_window_lock; - - group_first_block = ext3_group_first_block_no(sb, group); - group_end_block = group_first_block + (EXT3_BLOCKS_PER_GROUP(sb) - 1); - - if (grp_goal < 0) - start_block = group_first_block; - else - start_block = grp_goal + group_first_block; - - trace_ext3_alloc_new_reservation(sb, start_block); - size = my_rsv->rsv_goal_size; - - if (!rsv_is_empty(&my_rsv->rsv_window)) { - /* - * if the old reservation is cross group boundary - * and if the goal is inside the old reservation window, - * we will come here when we just failed to allocate from - * the first part of the window. We still have another part - * that belongs to the next group. In this case, there is no - * point to discard our window and try to allocate a new one - * in this group(which will fail). we should - * keep the reservation window, just simply move on. - * - * Maybe we could shift the start block of the reservation - * window to the first block of next group. - */ - - if ((my_rsv->rsv_start <= group_end_block) && - (my_rsv->rsv_end > group_end_block) && - (start_block >= my_rsv->rsv_start)) - return -1; - - if ((my_rsv->rsv_alloc_hit > - (my_rsv->rsv_end - my_rsv->rsv_start + 1) / 2)) { - /* - * if the previously allocation hit ratio is - * greater than 1/2, then we double the size of - * the reservation window the next time, - * otherwise we keep the same size window - */ - size = size * 2; - if (size > EXT3_MAX_RESERVE_BLOCKS) - size = EXT3_MAX_RESERVE_BLOCKS; - my_rsv->rsv_goal_size= size; - } - } - - spin_lock(rsv_lock); - /* - * shift the search start to the window near the goal block - */ - search_head = search_reserve_window(fs_rsv_root, start_block); - - /* - * find_next_reservable_window() simply finds a reservable window - * inside the given range(start_block, group_end_block). - * - * To make sure the reservation window has a free bit inside it, we - * need to check the bitmap after we found a reservable window. - */ -retry: - ret = find_next_reservable_window(search_head, my_rsv, sb, - start_block, group_end_block); - - if (ret == -1) { - if (!rsv_is_empty(&my_rsv->rsv_window)) - rsv_window_remove(sb, my_rsv); - spin_unlock(rsv_lock); - return -1; - } - - /* - * On success, find_next_reservable_window() returns the - * reservation window where there is a reservable space after it. - * Before we reserve this reservable space, we need - * to make sure there is at least a free block inside this region. - * - * searching the first free bit on the block bitmap and copy of - * last committed bitmap alternatively, until we found a allocatable - * block. Search start from the start block of the reservable space - * we just found. - */ - spin_unlock(rsv_lock); - first_free_block = bitmap_search_next_usable_block( - my_rsv->rsv_start - group_first_block, - bitmap_bh, group_end_block - group_first_block + 1); - - if (first_free_block < 0) { - /* - * no free block left on the bitmap, no point - * to reserve the space. return failed. - */ - spin_lock(rsv_lock); - if (!rsv_is_empty(&my_rsv->rsv_window)) - rsv_window_remove(sb, my_rsv); - spin_unlock(rsv_lock); - return -1; /* failed */ - } - - start_block = first_free_block + group_first_block; - /* - * check if the first free block is within the - * free space we just reserved - */ - if (start_block >= my_rsv->rsv_start && - start_block <= my_rsv->rsv_end) { - trace_ext3_reserved(sb, start_block, my_rsv); - return 0; /* success */ - } - /* - * if the first free bit we found is out of the reservable space - * continue search for next reservable space, - * start from where the free block is, - * we also shift the list head to where we stopped last time - */ - search_head = my_rsv; - spin_lock(rsv_lock); - goto retry; -} - -/** - * try_to_extend_reservation() - * @my_rsv: given reservation window - * @sb: super block - * @size: the delta to extend - * - * Attempt to expand the reservation window large enough to have - * required number of free blocks - * - * Since ext3_try_to_allocate() will always allocate blocks within - * the reservation window range, if the window size is too small, - * multiple blocks allocation has to stop at the end of the reservation - * window. To make this more efficient, given the total number of - * blocks needed and the current size of the window, we try to - * expand the reservation window size if necessary on a best-effort - * basis before ext3_new_blocks() tries to allocate blocks, - */ -static void try_to_extend_reservation(struct ext3_reserve_window_node *my_rsv, - struct super_block *sb, int size) -{ - struct ext3_reserve_window_node *next_rsv; - struct rb_node *next; - spinlock_t *rsv_lock = &EXT3_SB(sb)->s_rsv_window_lock; - - if (!spin_trylock(rsv_lock)) - return; - - next = rb_next(&my_rsv->rsv_node); - - if (!next) - my_rsv->rsv_end += size; - else { - next_rsv = rb_entry(next, struct ext3_reserve_window_node, rsv_node); - - if ((next_rsv->rsv_start - my_rsv->rsv_end - 1) >= size) - my_rsv->rsv_end += size; - else - my_rsv->rsv_end = next_rsv->rsv_start - 1; - } - spin_unlock(rsv_lock); -} - -/** - * ext3_try_to_allocate_with_rsv() - * @sb: superblock - * @handle: handle to this transaction - * @group: given allocation block group - * @bitmap_bh: bufferhead holds the block bitmap - * @grp_goal: given target block within the group - * @my_rsv: reservation window - * @count: target number of blocks to allocate - * @errp: pointer to store the error code - * - * This is the main function used to allocate a new block and its reservation - * window. - * - * Each time when a new block allocation is need, first try to allocate from - * its own reservation. If it does not have a reservation window, instead of - * looking for a free bit on bitmap first, then look up the reservation list to - * see if it is inside somebody else's reservation window, we try to allocate a - * reservation window for it starting from the goal first. Then do the block - * allocation within the reservation window. - * - * This will avoid keeping on searching the reservation list again and - * again when somebody is looking for a free block (without - * reservation), and there are lots of free blocks, but they are all - * being reserved. - * - * We use a red-black tree for the per-filesystem reservation list. - * - */ -static ext3_grpblk_t -ext3_try_to_allocate_with_rsv(struct super_block *sb, handle_t *handle, - unsigned int group, struct buffer_head *bitmap_bh, - ext3_grpblk_t grp_goal, - struct ext3_reserve_window_node * my_rsv, - unsigned long *count, int *errp) -{ - ext3_fsblk_t group_first_block, group_last_block; - ext3_grpblk_t ret = 0; - int fatal; - unsigned long num = *count; - - *errp = 0; - - /* - * Make sure we use undo access for the bitmap, because it is critical - * that we do the frozen_data COW on bitmap buffers in all cases even - * if the buffer is in BJ_Forget state in the committing transaction. - */ - BUFFER_TRACE(bitmap_bh, "get undo access for new block"); - fatal = ext3_journal_get_undo_access(handle, bitmap_bh); - if (fatal) { - *errp = fatal; - return -1; - } - - /* - * we don't deal with reservation when - * filesystem is mounted without reservation - * or the file is not a regular file - * or last attempt to allocate a block with reservation turned on failed - */ - if (my_rsv == NULL ) { - ret = ext3_try_to_allocate(sb, handle, group, bitmap_bh, - grp_goal, count, NULL); - goto out; - } - /* - * grp_goal is a group relative block number (if there is a goal) - * 0 <= grp_goal < EXT3_BLOCKS_PER_GROUP(sb) - * first block is a filesystem wide block number - * first block is the block number of the first block in this group - */ - group_first_block = ext3_group_first_block_no(sb, group); - group_last_block = group_first_block + (EXT3_BLOCKS_PER_GROUP(sb) - 1); - - /* - * Basically we will allocate a new block from inode's reservation - * window. - * - * We need to allocate a new reservation window, if: - * a) inode does not have a reservation window; or - * b) last attempt to allocate a block from existing reservation - * failed; or - * c) we come here with a goal and with a reservation window - * - * We do not need to allocate a new reservation window if we come here - * at the beginning with a goal and the goal is inside the window, or - * we don't have a goal but already have a reservation window. - * then we could go to allocate from the reservation window directly. - */ - while (1) { - if (rsv_is_empty(&my_rsv->rsv_window) || (ret < 0) || - !goal_in_my_reservation(&my_rsv->rsv_window, - grp_goal, group, sb)) { - if (my_rsv->rsv_goal_size < *count) - my_rsv->rsv_goal_size = *count; - ret = alloc_new_reservation(my_rsv, grp_goal, sb, - group, bitmap_bh); - if (ret < 0) - break; /* failed */ - - if (!goal_in_my_reservation(&my_rsv->rsv_window, - grp_goal, group, sb)) - grp_goal = -1; - } else if (grp_goal >= 0) { - int curr = my_rsv->rsv_end - - (grp_goal + group_first_block) + 1; - - if (curr < *count) - try_to_extend_reservation(my_rsv, sb, - *count - curr); - } - - if ((my_rsv->rsv_start > group_last_block) || - (my_rsv->rsv_end < group_first_block)) { - rsv_window_dump(&EXT3_SB(sb)->s_rsv_window_root, 1); - BUG(); - } - ret = ext3_try_to_allocate(sb, handle, group, bitmap_bh, - grp_goal, &num, &my_rsv->rsv_window); - if (ret >= 0) { - my_rsv->rsv_alloc_hit += num; - *count = num; - break; /* succeed */ - } - num = *count; - } -out: - if (ret >= 0) { - BUFFER_TRACE(bitmap_bh, "journal_dirty_metadata for " - "bitmap block"); - fatal = ext3_journal_dirty_metadata(handle, bitmap_bh); - if (fatal) { - *errp = fatal; - return -1; - } - return ret; - } - - BUFFER_TRACE(bitmap_bh, "journal_release_buffer"); - ext3_journal_release_buffer(handle, bitmap_bh); - return ret; -} - -/** - * ext3_has_free_blocks() - * @sbi: in-core super block structure. - * - * Check if filesystem has at least 1 free block available for allocation. - */ -static int ext3_has_free_blocks(struct ext3_sb_info *sbi, int use_reservation) -{ - ext3_fsblk_t free_blocks, root_blocks; - - free_blocks = percpu_counter_read_positive(&sbi->s_freeblocks_counter); - root_blocks = le32_to_cpu(sbi->s_es->s_r_blocks_count); - if (free_blocks < root_blocks + 1 && !capable(CAP_SYS_RESOURCE) && - !use_reservation && !uid_eq(sbi->s_resuid, current_fsuid()) && - (gid_eq(sbi->s_resgid, GLOBAL_ROOT_GID) || - !in_group_p (sbi->s_resgid))) { - return 0; - } - return 1; -} - -/** - * ext3_should_retry_alloc() - * @sb: super block - * @retries number of attemps has been made - * - * ext3_should_retry_alloc() is called when ENOSPC is returned, and if - * it is profitable to retry the operation, this function will wait - * for the current or committing transaction to complete, and then - * return TRUE. - * - * if the total number of retries exceed three times, return FALSE. - */ -int ext3_should_retry_alloc(struct super_block *sb, int *retries) -{ - if (!ext3_has_free_blocks(EXT3_SB(sb), 0) || (*retries)++ > 3) - return 0; - - jbd_debug(1, "%s: retrying operation after ENOSPC\n", sb->s_id); - - return journal_force_commit_nested(EXT3_SB(sb)->s_journal); -} - -/** - * ext3_new_blocks() -- core block(s) allocation function - * @handle: handle to this transaction - * @inode: file inode - * @goal: given target block(filesystem wide) - * @count: target number of blocks to allocate - * @errp: error code - * - * ext3_new_blocks uses a goal block to assist allocation. It tries to - * allocate block(s) from the block group contains the goal block first. If that - * fails, it will try to allocate block(s) from other block groups without - * any specific goal block. - * - */ -ext3_fsblk_t ext3_new_blocks(handle_t *handle, struct inode *inode, - ext3_fsblk_t goal, unsigned long *count, int *errp) -{ - struct buffer_head *bitmap_bh = NULL; - struct buffer_head *gdp_bh; - int group_no; - int goal_group; - ext3_grpblk_t grp_target_blk; /* blockgroup relative goal block */ - ext3_grpblk_t grp_alloc_blk; /* blockgroup-relative allocated block*/ - ext3_fsblk_t ret_block; /* filesyetem-wide allocated block */ - int bgi; /* blockgroup iteration index */ - int fatal = 0, err; - int performed_allocation = 0; - ext3_grpblk_t free_blocks; /* number of free blocks in a group */ - struct super_block *sb; - struct ext3_group_desc *gdp; - struct ext3_super_block *es; - struct ext3_sb_info *sbi; - struct ext3_reserve_window_node *my_rsv = NULL; - struct ext3_block_alloc_info *block_i; - unsigned short windowsz = 0; -#ifdef EXT3FS_DEBUG - static int goal_hits, goal_attempts; -#endif - unsigned long ngroups; - unsigned long num = *count; - - *errp = -ENOSPC; - sb = inode->i_sb; - - /* - * Check quota for allocation of this block. - */ - err = dquot_alloc_block(inode, num); - if (err) { - *errp = err; - return 0; - } - - trace_ext3_request_blocks(inode, goal, num); - - sbi = EXT3_SB(sb); - es = sbi->s_es; - ext3_debug("goal=%lu.\n", goal); - /* - * Allocate a block from reservation only when - * filesystem is mounted with reservation(default,-o reservation), and - * it's a regular file, and - * the desired window size is greater than 0 (One could use ioctl - * command EXT3_IOC_SETRSVSZ to set the window size to 0 to turn off - * reservation on that particular file) - */ - block_i = EXT3_I(inode)->i_block_alloc_info; - if (block_i && ((windowsz = block_i->rsv_window_node.rsv_goal_size) > 0)) - my_rsv = &block_i->rsv_window_node; - - if (!ext3_has_free_blocks(sbi, IS_NOQUOTA(inode))) { - *errp = -ENOSPC; - goto out; - } - - /* - * First, test whether the goal block is free. - */ - if (goal < le32_to_cpu(es->s_first_data_block) || - goal >= le32_to_cpu(es->s_blocks_count)) - goal = le32_to_cpu(es->s_first_data_block); - group_no = (goal - le32_to_cpu(es->s_first_data_block)) / - EXT3_BLOCKS_PER_GROUP(sb); - goal_group = group_no; -retry_alloc: - gdp = ext3_get_group_desc(sb, group_no, &gdp_bh); - if (!gdp) - goto io_error; - - free_blocks = le16_to_cpu(gdp->bg_free_blocks_count); - /* - * if there is not enough free blocks to make a new resevation - * turn off reservation for this allocation - */ - if (my_rsv && (free_blocks < windowsz) - && (free_blocks > 0) - && (rsv_is_empty(&my_rsv->rsv_window))) - my_rsv = NULL; - - if (free_blocks > 0) { - grp_target_blk = ((goal - le32_to_cpu(es->s_first_data_block)) % - EXT3_BLOCKS_PER_GROUP(sb)); - bitmap_bh = read_block_bitmap(sb, group_no); - if (!bitmap_bh) - goto io_error; - grp_alloc_blk = ext3_try_to_allocate_with_rsv(sb, handle, - group_no, bitmap_bh, grp_target_blk, - my_rsv, &num, &fatal); - if (fatal) - goto out; - if (grp_alloc_blk >= 0) - goto allocated; - } - - ngroups = EXT3_SB(sb)->s_groups_count; - smp_rmb(); - - /* - * Now search the rest of the groups. We assume that - * group_no and gdp correctly point to the last group visited. - */ - for (bgi = 0; bgi < ngroups; bgi++) { - group_no++; - if (group_no >= ngroups) - group_no = 0; - gdp = ext3_get_group_desc(sb, group_no, &gdp_bh); - if (!gdp) - goto io_error; - free_blocks = le16_to_cpu(gdp->bg_free_blocks_count); - /* - * skip this group (and avoid loading bitmap) if there - * are no free blocks - */ - if (!free_blocks) - continue; - /* - * skip this group if the number of - * free blocks is less than half of the reservation - * window size. - */ - if (my_rsv && (free_blocks <= (windowsz/2))) - continue; - - brelse(bitmap_bh); - bitmap_bh = read_block_bitmap(sb, group_no); - if (!bitmap_bh) - goto io_error; - /* - * try to allocate block(s) from this group, without a goal(-1). - */ - grp_alloc_blk = ext3_try_to_allocate_with_rsv(sb, handle, - group_no, bitmap_bh, -1, my_rsv, - &num, &fatal); - if (fatal) - goto out; - if (grp_alloc_blk >= 0) - goto allocated; - } - /* - * We may end up a bogus earlier ENOSPC error due to - * filesystem is "full" of reservations, but - * there maybe indeed free blocks available on disk - * In this case, we just forget about the reservations - * just do block allocation as without reservations. - */ - if (my_rsv) { - my_rsv = NULL; - windowsz = 0; - group_no = goal_group; - goto retry_alloc; - } - /* No space left on the device */ - *errp = -ENOSPC; - goto out; - -allocated: - - ext3_debug("using block group %d(%d)\n", - group_no, gdp->bg_free_blocks_count); - - BUFFER_TRACE(gdp_bh, "get_write_access"); - fatal = ext3_journal_get_write_access(handle, gdp_bh); - if (fatal) - goto out; - - ret_block = grp_alloc_blk + ext3_group_first_block_no(sb, group_no); - - if (in_range(le32_to_cpu(gdp->bg_block_bitmap), ret_block, num) || - in_range(le32_to_cpu(gdp->bg_inode_bitmap), ret_block, num) || - in_range(ret_block, le32_to_cpu(gdp->bg_inode_table), - EXT3_SB(sb)->s_itb_per_group) || - in_range(ret_block + num - 1, le32_to_cpu(gdp->bg_inode_table), - EXT3_SB(sb)->s_itb_per_group)) { - ext3_error(sb, "ext3_new_block", - "Allocating block in system zone - " - "blocks from "E3FSBLK", length %lu", - ret_block, num); - /* - * claim_block() marked the blocks we allocated as in use. So we - * may want to selectively mark some of the blocks as free. - */ - goto retry_alloc; - } - - performed_allocation = 1; - -#ifdef CONFIG_JBD_DEBUG - { - struct buffer_head *debug_bh; - - /* Record bitmap buffer state in the newly allocated block */ - debug_bh = sb_find_get_block(sb, ret_block); - if (debug_bh) { - BUFFER_TRACE(debug_bh, "state when allocated"); - BUFFER_TRACE2(debug_bh, bitmap_bh, "bitmap state"); - brelse(debug_bh); - } - } - jbd_lock_bh_state(bitmap_bh); - spin_lock(sb_bgl_lock(sbi, group_no)); - if (buffer_jbd(bitmap_bh) && bh2jh(bitmap_bh)->b_committed_data) { - int i; - - for (i = 0; i < num; i++) { - if (ext3_test_bit(grp_alloc_blk+i, - bh2jh(bitmap_bh)->b_committed_data)) { - printk("%s: block was unexpectedly set in " - "b_committed_data\n", __func__); - } - } - } - ext3_debug("found bit %d\n", grp_alloc_blk); - spin_unlock(sb_bgl_lock(sbi, group_no)); - jbd_unlock_bh_state(bitmap_bh); -#endif - - if (ret_block + num - 1 >= le32_to_cpu(es->s_blocks_count)) { - ext3_error(sb, "ext3_new_block", - "block("E3FSBLK") >= blocks count(%d) - " - "block_group = %d, es == %p ", ret_block, - le32_to_cpu(es->s_blocks_count), group_no, es); - goto out; - } - - /* - * It is up to the caller to add the new buffer to a journal - * list of some description. We don't know in advance whether - * the caller wants to use it as metadata or data. - */ - ext3_debug("allocating block %lu. Goal hits %d of %d.\n", - ret_block, goal_hits, goal_attempts); - - spin_lock(sb_bgl_lock(sbi, group_no)); - le16_add_cpu(&gdp->bg_free_blocks_count, -num); - spin_unlock(sb_bgl_lock(sbi, group_no)); - percpu_counter_sub(&sbi->s_freeblocks_counter, num); - - BUFFER_TRACE(gdp_bh, "journal_dirty_metadata for group descriptor"); - fatal = ext3_journal_dirty_metadata(handle, gdp_bh); - if (fatal) - goto out; - - *errp = 0; - brelse(bitmap_bh); - - if (num < *count) { - dquot_free_block(inode, *count-num); - *count = num; - } - - trace_ext3_allocate_blocks(inode, goal, num, - (unsigned long long)ret_block); - - return ret_block; - -io_error: - *errp = -EIO; -out: - if (fatal) { - *errp = fatal; - ext3_std_error(sb, fatal); - } - /* - * Undo the block allocation - */ - if (!performed_allocation) - dquot_free_block(inode, *count); - brelse(bitmap_bh); - return 0; -} - -ext3_fsblk_t ext3_new_block(handle_t *handle, struct inode *inode, - ext3_fsblk_t goal, int *errp) -{ - unsigned long count = 1; - - return ext3_new_blocks(handle, inode, goal, &count, errp); -} - -/** - * ext3_count_free_blocks() -- count filesystem free blocks - * @sb: superblock - * - * Adds up the number of free blocks from each block group. - */ -ext3_fsblk_t ext3_count_free_blocks(struct super_block *sb) -{ - ext3_fsblk_t desc_count; - struct ext3_group_desc *gdp; - int i; - unsigned long ngroups = EXT3_SB(sb)->s_groups_count; -#ifdef EXT3FS_DEBUG - struct ext3_super_block *es; - ext3_fsblk_t bitmap_count; - unsigned long x; - struct buffer_head *bitmap_bh = NULL; - - es = EXT3_SB(sb)->s_es; - desc_count = 0; - bitmap_count = 0; - gdp = NULL; - - smp_rmb(); - for (i = 0; i < ngroups; i++) { - gdp = ext3_get_group_desc(sb, i, NULL); - if (!gdp) - continue; - desc_count += le16_to_cpu(gdp->bg_free_blocks_count); - brelse(bitmap_bh); - bitmap_bh = read_block_bitmap(sb, i); - if (bitmap_bh == NULL) - continue; - - x = ext3_count_free(bitmap_bh, sb->s_blocksize); - printk("group %d: stored = %d, counted = %lu\n", - i, le16_to_cpu(gdp->bg_free_blocks_count), x); - bitmap_count += x; - } - brelse(bitmap_bh); - printk("ext3_count_free_blocks: stored = "E3FSBLK - ", computed = "E3FSBLK", "E3FSBLK"\n", - (ext3_fsblk_t)le32_to_cpu(es->s_free_blocks_count), - desc_count, bitmap_count); - return bitmap_count; -#else - desc_count = 0; - smp_rmb(); - for (i = 0; i < ngroups; i++) { - gdp = ext3_get_group_desc(sb, i, NULL); - if (!gdp) - continue; - desc_count += le16_to_cpu(gdp->bg_free_blocks_count); - } - - return desc_count; -#endif -} - -static inline int test_root(int a, int b) -{ - int num = b; - - while (a > num) - num *= b; - return num == a; -} - -static int ext3_group_sparse(int group) -{ - if (group <= 1) - return 1; - if (!(group & 1)) - return 0; - return (test_root(group, 7) || test_root(group, 5) || - test_root(group, 3)); -} - -/** - * ext3_bg_has_super - number of blocks used by the superblock in group - * @sb: superblock for filesystem - * @group: group number to check - * - * Return the number of blocks used by the superblock (primary or backup) - * in this group. Currently this will be only 0 or 1. - */ -int ext3_bg_has_super(struct super_block *sb, int group) -{ - if (EXT3_HAS_RO_COMPAT_FEATURE(sb, - EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER) && - !ext3_group_sparse(group)) - return 0; - return 1; -} - -static unsigned long ext3_bg_num_gdb_meta(struct super_block *sb, int group) -{ - unsigned long metagroup = group / EXT3_DESC_PER_BLOCK(sb); - unsigned long first = metagroup * EXT3_DESC_PER_BLOCK(sb); - unsigned long last = first + EXT3_DESC_PER_BLOCK(sb) - 1; - - if (group == first || group == first + 1 || group == last) - return 1; - return 0; -} - -static unsigned long ext3_bg_num_gdb_nometa(struct super_block *sb, int group) -{ - return ext3_bg_has_super(sb, group) ? EXT3_SB(sb)->s_gdb_count : 0; -} - -/** - * ext3_bg_num_gdb - number of blocks used by the group table in group - * @sb: superblock for filesystem - * @group: group number to check - * - * Return the number of blocks used by the group descriptor table - * (primary or backup) in this group. In the future there may be a - * different number of descriptor blocks in each group. - */ -unsigned long ext3_bg_num_gdb(struct super_block *sb, int group) -{ - unsigned long first_meta_bg = - le32_to_cpu(EXT3_SB(sb)->s_es->s_first_meta_bg); - unsigned long metagroup = group / EXT3_DESC_PER_BLOCK(sb); - - if (!EXT3_HAS_INCOMPAT_FEATURE(sb,EXT3_FEATURE_INCOMPAT_META_BG) || - metagroup < first_meta_bg) - return ext3_bg_num_gdb_nometa(sb,group); - - return ext3_bg_num_gdb_meta(sb,group); - -} - -/** - * ext3_trim_all_free -- function to trim all free space in alloc. group - * @sb: super block for file system - * @group: allocation group to trim - * @start: first group block to examine - * @max: last group block to examine - * @gdp: allocation group description structure - * @minblocks: minimum extent block count - * - * ext3_trim_all_free walks through group's block bitmap searching for free - * blocks. When the free block is found, it tries to allocate this block and - * consequent free block to get the biggest free extent possible, until it - * reaches any used block. Then issue a TRIM command on this extent and free - * the extent in the block bitmap. This is done until whole group is scanned. - */ -static ext3_grpblk_t ext3_trim_all_free(struct super_block *sb, - unsigned int group, - ext3_grpblk_t start, ext3_grpblk_t max, - ext3_grpblk_t minblocks) -{ - handle_t *handle; - ext3_grpblk_t next, free_blocks, bit, freed, count = 0; - ext3_fsblk_t discard_block; - struct ext3_sb_info *sbi; - struct buffer_head *gdp_bh, *bitmap_bh = NULL; - struct ext3_group_desc *gdp; - int err = 0, ret = 0; - - /* - * We will update one block bitmap, and one group descriptor - */ - handle = ext3_journal_start_sb(sb, 2); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - bitmap_bh = read_block_bitmap(sb, group); - if (!bitmap_bh) { - err = -EIO; - goto err_out; - } - - BUFFER_TRACE(bitmap_bh, "getting undo access"); - err = ext3_journal_get_undo_access(handle, bitmap_bh); - if (err) - goto err_out; - - gdp = ext3_get_group_desc(sb, group, &gdp_bh); - if (!gdp) { - err = -EIO; - goto err_out; - } - - BUFFER_TRACE(gdp_bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, gdp_bh); - if (err) - goto err_out; - - free_blocks = le16_to_cpu(gdp->bg_free_blocks_count); - sbi = EXT3_SB(sb); - - /* Walk through the whole group */ - while (start <= max) { - start = bitmap_search_next_usable_block(start, bitmap_bh, max); - if (start < 0) - break; - next = start; - - /* - * Allocate contiguous free extents by setting bits in the - * block bitmap - */ - while (next <= max - && claim_block(sb_bgl_lock(sbi, group), - next, bitmap_bh)) { - next++; - } - - /* We did not claim any blocks */ - if (next == start) - continue; - - discard_block = (ext3_fsblk_t)start + - ext3_group_first_block_no(sb, group); - - /* Update counters */ - spin_lock(sb_bgl_lock(sbi, group)); - le16_add_cpu(&gdp->bg_free_blocks_count, start - next); - spin_unlock(sb_bgl_lock(sbi, group)); - percpu_counter_sub(&sbi->s_freeblocks_counter, next - start); - - free_blocks -= next - start; - /* Do not issue a TRIM on extents smaller than minblocks */ - if ((next - start) < minblocks) - goto free_extent; - - trace_ext3_discard_blocks(sb, discard_block, next - start); - /* Send the TRIM command down to the device */ - err = sb_issue_discard(sb, discard_block, next - start, - GFP_NOFS, 0); - count += (next - start); -free_extent: - freed = 0; - - /* - * Clear bits in the bitmap - */ - for (bit = start; bit < next; bit++) { - BUFFER_TRACE(bitmap_bh, "clear bit"); - if (!ext3_clear_bit_atomic(sb_bgl_lock(sbi, group), - bit, bitmap_bh->b_data)) { - ext3_error(sb, __func__, - "bit already cleared for block "E3FSBLK, - (unsigned long)bit); - BUFFER_TRACE(bitmap_bh, "bit already cleared"); - } else { - freed++; - } - } - - /* Update couters */ - spin_lock(sb_bgl_lock(sbi, group)); - le16_add_cpu(&gdp->bg_free_blocks_count, freed); - spin_unlock(sb_bgl_lock(sbi, group)); - percpu_counter_add(&sbi->s_freeblocks_counter, freed); - - start = next; - if (err < 0) { - if (err != -EOPNOTSUPP) - ext3_warning(sb, __func__, "Discard command " - "returned error %d\n", err); - break; - } - - if (fatal_signal_pending(current)) { - err = -ERESTARTSYS; - break; - } - - cond_resched(); - - /* No more suitable extents */ - if (free_blocks < minblocks) - break; - } - - /* We dirtied the bitmap block */ - BUFFER_TRACE(bitmap_bh, "dirtied bitmap block"); - ret = ext3_journal_dirty_metadata(handle, bitmap_bh); - if (!err) - err = ret; - - /* And the group descriptor block */ - BUFFER_TRACE(gdp_bh, "dirtied group descriptor block"); - ret = ext3_journal_dirty_metadata(handle, gdp_bh); - if (!err) - err = ret; - - ext3_debug("trimmed %d blocks in the group %d\n", - count, group); - -err_out: - if (err) - count = err; - ext3_journal_stop(handle); - brelse(bitmap_bh); - - return count; -} - -/** - * ext3_trim_fs() -- trim ioctl handle function - * @sb: superblock for filesystem - * @start: First Byte to trim - * @len: number of Bytes to trim from start - * @minlen: minimum extent length in Bytes - * - * ext3_trim_fs goes through all allocation groups containing Bytes from - * start to start+len. For each such a group ext3_trim_all_free function - * is invoked to trim all free space. - */ -int ext3_trim_fs(struct super_block *sb, struct fstrim_range *range) -{ - ext3_grpblk_t last_block, first_block; - unsigned long group, first_group, last_group; - struct ext3_group_desc *gdp; - struct ext3_super_block *es = EXT3_SB(sb)->s_es; - uint64_t start, minlen, end, trimmed = 0; - ext3_fsblk_t first_data_blk = - le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block); - ext3_fsblk_t max_blks = le32_to_cpu(es->s_blocks_count); - int ret = 0; - - start = range->start >> sb->s_blocksize_bits; - end = start + (range->len >> sb->s_blocksize_bits) - 1; - minlen = range->minlen >> sb->s_blocksize_bits; - - if (minlen > EXT3_BLOCKS_PER_GROUP(sb) || - start >= max_blks || - range->len < sb->s_blocksize) - return -EINVAL; - if (end >= max_blks) - end = max_blks - 1; - if (end <= first_data_blk) - goto out; - if (start < first_data_blk) - start = first_data_blk; - - smp_rmb(); - - /* Determine first and last group to examine based on start and len */ - ext3_get_group_no_and_offset(sb, (ext3_fsblk_t) start, - &first_group, &first_block); - ext3_get_group_no_and_offset(sb, (ext3_fsblk_t) end, - &last_group, &last_block); - - /* end now represents the last block to discard in this group */ - end = EXT3_BLOCKS_PER_GROUP(sb) - 1; - - for (group = first_group; group <= last_group; group++) { - gdp = ext3_get_group_desc(sb, group, NULL); - if (!gdp) - break; - - /* - * For all the groups except the last one, last block will - * always be EXT3_BLOCKS_PER_GROUP(sb)-1, so we only need to - * change it for the last group, note that last_block is - * already computed earlier by ext3_get_group_no_and_offset() - */ - if (group == last_group) - end = last_block; - - if (le16_to_cpu(gdp->bg_free_blocks_count) >= minlen) { - ret = ext3_trim_all_free(sb, group, first_block, - end, minlen); - if (ret < 0) - break; - trimmed += ret; - } - - /* - * For every group except the first one, we are sure - * that the first block to discard will be block #0. - */ - first_block = 0; - } - - if (ret > 0) - ret = 0; - -out: - range->len = trimmed * sb->s_blocksize; - return ret; -} diff --git a/fs/ext3/bitmap.c b/fs/ext3/bitmap.c deleted file mode 100644 index ef9c643..0000000 --- a/fs/ext3/bitmap.c +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/fs/ext3/bitmap.c - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - */ - -#include "ext3.h" - -#ifdef EXT3FS_DEBUG - -unsigned long ext3_count_free (struct buffer_head * map, unsigned int numchars) -{ - return numchars * BITS_PER_BYTE - memweight(map->b_data, numchars); -} - -#endif /* EXT3FS_DEBUG */ - diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c deleted file mode 100644 index 17742ee..0000000 --- a/fs/ext3/dir.c +++ /dev/null @@ -1,537 +0,0 @@ -/* - * linux/fs/ext3/dir.c - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/fs/minix/dir.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * ext3 directory handling functions - * - * Big-endian to little-endian byte-swapping/bitmaps by - * David S. Miller (davem@caip.rutgers.edu), 1995 - * - * Hash Tree Directory indexing (c) 2001 Daniel Phillips - * - */ - -#include <linux/compat.h> -#include "ext3.h" - -static unsigned char ext3_filetype_table[] = { - DT_UNKNOWN, DT_REG, DT_DIR, DT_CHR, DT_BLK, DT_FIFO, DT_SOCK, DT_LNK -}; - -static int ext3_dx_readdir(struct file *, struct dir_context *); - -static unsigned char get_dtype(struct super_block *sb, int filetype) -{ - if (!EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_FILETYPE) || - (filetype >= EXT3_FT_MAX)) - return DT_UNKNOWN; - - return (ext3_filetype_table[filetype]); -} - -/** - * Check if the given dir-inode refers to an htree-indexed directory - * (or a directory which could potentially get converted to use htree - * indexing). - * - * Return 1 if it is a dx dir, 0 if not - */ -static int is_dx_dir(struct inode *inode) -{ - struct super_block *sb = inode->i_sb; - - if (EXT3_HAS_COMPAT_FEATURE(inode->i_sb, - EXT3_FEATURE_COMPAT_DIR_INDEX) && - ((EXT3_I(inode)->i_flags & EXT3_INDEX_FL) || - ((inode->i_size >> sb->s_blocksize_bits) == 1))) - return 1; - - return 0; -} - -int ext3_check_dir_entry (const char * function, struct inode * dir, - struct ext3_dir_entry_2 * de, - struct buffer_head * bh, - unsigned long offset) -{ - const char * error_msg = NULL; - const int rlen = ext3_rec_len_from_disk(de->rec_len); - - if (unlikely(rlen < EXT3_DIR_REC_LEN(1))) - error_msg = "rec_len is smaller than minimal"; - else if (unlikely(rlen % 4 != 0)) - error_msg = "rec_len % 4 != 0"; - else if (unlikely(rlen < EXT3_DIR_REC_LEN(de->name_len))) - error_msg = "rec_len is too small for name_len"; - else if (unlikely((((char *) de - bh->b_data) + rlen > dir->i_sb->s_blocksize))) - error_msg = "directory entry across blocks"; - else if (unlikely(le32_to_cpu(de->inode) > - le32_to_cpu(EXT3_SB(dir->i_sb)->s_es->s_inodes_count))) - error_msg = "inode out of bounds"; - - if (unlikely(error_msg != NULL)) - ext3_error (dir->i_sb, function, - "bad entry in directory #%lu: %s - " - "offset=%lu, inode=%lu, rec_len=%d, name_len=%d", - dir->i_ino, error_msg, offset, - (unsigned long) le32_to_cpu(de->inode), - rlen, de->name_len); - - return error_msg == NULL ? 1 : 0; -} - -static int ext3_readdir(struct file *file, struct dir_context *ctx) -{ - unsigned long offset; - int i; - struct ext3_dir_entry_2 *de; - int err; - struct inode *inode = file_inode(file); - struct super_block *sb = inode->i_sb; - int dir_has_error = 0; - - if (is_dx_dir(inode)) { - err = ext3_dx_readdir(file, ctx); - if (err != ERR_BAD_DX_DIR) - return err; - /* - * We don't set the inode dirty flag since it's not - * critical that it get flushed back to the disk. - */ - EXT3_I(inode)->i_flags &= ~EXT3_INDEX_FL; - } - offset = ctx->pos & (sb->s_blocksize - 1); - - while (ctx->pos < inode->i_size) { - unsigned long blk = ctx->pos >> EXT3_BLOCK_SIZE_BITS(sb); - struct buffer_head map_bh; - struct buffer_head *bh = NULL; - - map_bh.b_state = 0; - err = ext3_get_blocks_handle(NULL, inode, blk, 1, &map_bh, 0); - if (err > 0) { - pgoff_t index = map_bh.b_blocknr >> - (PAGE_CACHE_SHIFT - inode->i_blkbits); - if (!ra_has_index(&file->f_ra, index)) - page_cache_sync_readahead( - sb->s_bdev->bd_inode->i_mapping, - &file->f_ra, file, - index, 1); - file->f_ra.prev_pos = (loff_t)index << PAGE_CACHE_SHIFT; - bh = ext3_bread(NULL, inode, blk, 0, &err); - } - - /* - * We ignore I/O errors on directories so users have a chance - * of recovering data when there's a bad sector - */ - if (!bh) { - if (!dir_has_error) { - ext3_error(sb, __func__, "directory #%lu " - "contains a hole at offset %lld", - inode->i_ino, ctx->pos); - dir_has_error = 1; - } - /* corrupt size? Maybe no more blocks to read */ - if (ctx->pos > inode->i_blocks << 9) - break; - ctx->pos += sb->s_blocksize - offset; - continue; - } - - /* If the dir block has changed since the last call to - * readdir(2), then we might be pointing to an invalid - * dirent right now. Scan from the start of the block - * to make sure. */ - if (offset && file->f_version != inode->i_version) { - for (i = 0; i < sb->s_blocksize && i < offset; ) { - de = (struct ext3_dir_entry_2 *) - (bh->b_data + i); - /* It's too expensive to do a full - * dirent test each time round this - * loop, but we do have to test at - * least that it is non-zero. A - * failure will be detected in the - * dirent test below. */ - if (ext3_rec_len_from_disk(de->rec_len) < - EXT3_DIR_REC_LEN(1)) - break; - i += ext3_rec_len_from_disk(de->rec_len); - } - offset = i; - ctx->pos = (ctx->pos & ~(sb->s_blocksize - 1)) - | offset; - file->f_version = inode->i_version; - } - - while (ctx->pos < inode->i_size - && offset < sb->s_blocksize) { - de = (struct ext3_dir_entry_2 *) (bh->b_data + offset); - if (!ext3_check_dir_entry ("ext3_readdir", inode, de, - bh, offset)) { - /* On error, skip the to the - next block. */ - ctx->pos = (ctx->pos | - (sb->s_blocksize - 1)) + 1; - break; - } - offset += ext3_rec_len_from_disk(de->rec_len); - if (le32_to_cpu(de->inode)) { - if (!dir_emit(ctx, de->name, de->name_len, - le32_to_cpu(de->inode), - get_dtype(sb, de->file_type))) { - brelse(bh); - return 0; - } - } - ctx->pos += ext3_rec_len_from_disk(de->rec_len); - } - offset = 0; - brelse (bh); - if (ctx->pos < inode->i_size) - if (!dir_relax(inode)) - return 0; - } - return 0; -} - -static inline int is_32bit_api(void) -{ -#ifdef CONFIG_COMPAT - return is_compat_task(); -#else - return (BITS_PER_LONG == 32); -#endif -} - -/* - * These functions convert from the major/minor hash to an f_pos - * value for dx directories - * - * Upper layer (for example NFS) should specify FMODE_32BITHASH or - * FMODE_64BITHASH explicitly. On the other hand, we allow ext3 to be mounted - * directly on both 32-bit and 64-bit nodes, under such case, neither - * FMODE_32BITHASH nor FMODE_64BITHASH is specified. - */ -static inline loff_t hash2pos(struct file *filp, __u32 major, __u32 minor) -{ - if ((filp->f_mode & FMODE_32BITHASH) || - (!(filp->f_mode & FMODE_64BITHASH) && is_32bit_api())) - return major >> 1; - else - return ((__u64)(major >> 1) << 32) | (__u64)minor; -} - -static inline __u32 pos2maj_hash(struct file *filp, loff_t pos) -{ - if ((filp->f_mode & FMODE_32BITHASH) || - (!(filp->f_mode & FMODE_64BITHASH) && is_32bit_api())) - return (pos << 1) & 0xffffffff; - else - return ((pos >> 32) << 1) & 0xffffffff; -} - -static inline __u32 pos2min_hash(struct file *filp, loff_t pos) -{ - if ((filp->f_mode & FMODE_32BITHASH) || - (!(filp->f_mode & FMODE_64BITHASH) && is_32bit_api())) - return 0; - else - return pos & 0xffffffff; -} - -/* - * Return 32- or 64-bit end-of-file for dx directories - */ -static inline loff_t ext3_get_htree_eof(struct file *filp) -{ - if ((filp->f_mode & FMODE_32BITHASH) || - (!(filp->f_mode & FMODE_64BITHASH) && is_32bit_api())) - return EXT3_HTREE_EOF_32BIT; - else - return EXT3_HTREE_EOF_64BIT; -} - - -/* - * ext3_dir_llseek() calls generic_file_llseek[_size]() to handle both - * non-htree and htree directories, where the "offset" is in terms - * of the filename hash value instead of the byte offset. - * - * Because we may return a 64-bit hash that is well beyond s_maxbytes, - * we need to pass the max hash as the maximum allowable offset in - * the htree directory case. - * - * NOTE: offsets obtained *before* ext3_set_inode_flag(dir, EXT3_INODE_INDEX) - * will be invalid once the directory was converted into a dx directory - */ -static loff_t ext3_dir_llseek(struct file *file, loff_t offset, int whence) -{ - struct inode *inode = file->f_mapping->host; - int dx_dir = is_dx_dir(inode); - loff_t htree_max = ext3_get_htree_eof(file); - - if (likely(dx_dir)) - return generic_file_llseek_size(file, offset, whence, - htree_max, htree_max); - else - return generic_file_llseek(file, offset, whence); -} - -/* - * This structure holds the nodes of the red-black tree used to store - * the directory entry in hash order. - */ -struct fname { - __u32 hash; - __u32 minor_hash; - struct rb_node rb_hash; - struct fname *next; - __u32 inode; - __u8 name_len; - __u8 file_type; - char name[0]; -}; - -/* - * This functoin implements a non-recursive way of freeing all of the - * nodes in the red-black tree. - */ -static void free_rb_tree_fname(struct rb_root *root) -{ - struct fname *fname, *next; - - rbtree_postorder_for_each_entry_safe(fname, next, root, rb_hash) - do { - struct fname *old = fname; - fname = fname->next; - kfree(old); - } while (fname); - - *root = RB_ROOT; -} - -static struct dir_private_info *ext3_htree_create_dir_info(struct file *filp, - loff_t pos) -{ - struct dir_private_info *p; - - p = kzalloc(sizeof(struct dir_private_info), GFP_KERNEL); - if (!p) - return NULL; - p->curr_hash = pos2maj_hash(filp, pos); - p->curr_minor_hash = pos2min_hash(filp, pos); - return p; -} - -void ext3_htree_free_dir_info(struct dir_private_info *p) -{ - free_rb_tree_fname(&p->root); - kfree(p); -} - -/* - * Given a directory entry, enter it into the fname rb tree. - */ -int ext3_htree_store_dirent(struct file *dir_file, __u32 hash, - __u32 minor_hash, - struct ext3_dir_entry_2 *dirent) -{ - struct rb_node **p, *parent = NULL; - struct fname * fname, *new_fn; - struct dir_private_info *info; - int len; - - info = (struct dir_private_info *) dir_file->private_data; - p = &info->root.rb_node; - - /* Create and allocate the fname structure */ - len = sizeof(struct fname) + dirent->name_len + 1; - new_fn = kzalloc(len, GFP_KERNEL); - if (!new_fn) - return -ENOMEM; - new_fn->hash = hash; - new_fn->minor_hash = minor_hash; - new_fn->inode = le32_to_cpu(dirent->inode); - new_fn->name_len = dirent->name_len; - new_fn->file_type = dirent->file_type; - memcpy(new_fn->name, dirent->name, dirent->name_len); - new_fn->name[dirent->name_len] = 0; - - while (*p) { - parent = *p; - fname = rb_entry(parent, struct fname, rb_hash); - - /* - * If the hash and minor hash match up, then we put - * them on a linked list. This rarely happens... - */ - if ((new_fn->hash == fname->hash) && - (new_fn->minor_hash == fname->minor_hash)) { - new_fn->next = fname->next; - fname->next = new_fn; - return 0; - } - - if (new_fn->hash < fname->hash) - p = &(*p)->rb_left; - else if (new_fn->hash > fname->hash) - p = &(*p)->rb_right; - else if (new_fn->minor_hash < fname->minor_hash) - p = &(*p)->rb_left; - else /* if (new_fn->minor_hash > fname->minor_hash) */ - p = &(*p)->rb_right; - } - - rb_link_node(&new_fn->rb_hash, parent, p); - rb_insert_color(&new_fn->rb_hash, &info->root); - return 0; -} - - - -/* - * This is a helper function for ext3_dx_readdir. It calls filldir - * for all entres on the fname linked list. (Normally there is only - * one entry on the linked list, unless there are 62 bit hash collisions.) - */ -static bool call_filldir(struct file *file, struct dir_context *ctx, - struct fname *fname) -{ - struct dir_private_info *info = file->private_data; - struct inode *inode = file_inode(file); - struct super_block *sb = inode->i_sb; - - if (!fname) { - printk("call_filldir: called with null fname?!?\n"); - return true; - } - ctx->pos = hash2pos(file, fname->hash, fname->minor_hash); - while (fname) { - if (!dir_emit(ctx, fname->name, fname->name_len, - fname->inode, - get_dtype(sb, fname->file_type))) { - info->extra_fname = fname; - return false; - } - fname = fname->next; - } - return true; -} - -static int ext3_dx_readdir(struct file *file, struct dir_context *ctx) -{ - struct dir_private_info *info = file->private_data; - struct inode *inode = file_inode(file); - struct fname *fname; - int ret; - - if (!info) { - info = ext3_htree_create_dir_info(file, ctx->pos); - if (!info) - return -ENOMEM; - file->private_data = info; - } - - if (ctx->pos == ext3_get_htree_eof(file)) - return 0; /* EOF */ - - /* Some one has messed with f_pos; reset the world */ - if (info->last_pos != ctx->pos) { - free_rb_tree_fname(&info->root); - info->curr_node = NULL; - info->extra_fname = NULL; - info->curr_hash = pos2maj_hash(file, ctx->pos); - info->curr_minor_hash = pos2min_hash(file, ctx->pos); - } - - /* - * If there are any leftover names on the hash collision - * chain, return them first. - */ - if (info->extra_fname) { - if (!call_filldir(file, ctx, info->extra_fname)) - goto finished; - info->extra_fname = NULL; - goto next_node; - } else if (!info->curr_node) - info->curr_node = rb_first(&info->root); - - while (1) { - /* - * Fill the rbtree if we have no more entries, - * or the inode has changed since we last read in the - * cached entries. - */ - if ((!info->curr_node) || - (file->f_version != inode->i_version)) { - info->curr_node = NULL; - free_rb_tree_fname(&info->root); - file->f_version = inode->i_version; - ret = ext3_htree_fill_tree(file, info->curr_hash, - info->curr_minor_hash, - &info->next_hash); - if (ret < 0) - return ret; - if (ret == 0) { - ctx->pos = ext3_get_htree_eof(file); - break; - } - info->curr_node = rb_first(&info->root); - } - - fname = rb_entry(info->curr_node, struct fname, rb_hash); - info->curr_hash = fname->hash; - info->curr_minor_hash = fname->minor_hash; - if (!call_filldir(file, ctx, fname)) - break; - next_node: - info->curr_node = rb_next(info->curr_node); - if (info->curr_node) { - fname = rb_entry(info->curr_node, struct fname, - rb_hash); - info->curr_hash = fname->hash; - info->curr_minor_hash = fname->minor_hash; - } else { - if (info->next_hash == ~0) { - ctx->pos = ext3_get_htree_eof(file); - break; - } - info->curr_hash = info->next_hash; - info->curr_minor_hash = 0; - } - } -finished: - info->last_pos = ctx->pos; - return 0; -} - -static int ext3_release_dir (struct inode * inode, struct file * filp) -{ - if (filp->private_data) - ext3_htree_free_dir_info(filp->private_data); - - return 0; -} - -const struct file_operations ext3_dir_operations = { - .llseek = ext3_dir_llseek, - .read = generic_read_dir, - .iterate = ext3_readdir, - .unlocked_ioctl = ext3_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = ext3_compat_ioctl, -#endif - .fsync = ext3_sync_file, - .release = ext3_release_dir, -}; diff --git a/fs/ext3/ext3.h b/fs/ext3/ext3.h deleted file mode 100644 index f483a80..0000000 --- a/fs/ext3/ext3.h +++ /dev/null @@ -1,1332 +0,0 @@ -/* - * Written by Stephen C. Tweedie <sct@redhat.com>, 1999 - * - * Copyright 1998--1999 Red Hat corp --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/include/linux/minix_fs.h - * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -#include <linux/fs.h> -#include <linux/jbd.h> -#include <linux/magic.h> -#include <linux/bug.h> -#include <linux/blockgroup_lock.h> - -/* - * The second extended filesystem constants/structures - */ - -/* - * Define EXT3FS_DEBUG to produce debug messages - */ -#undef EXT3FS_DEBUG - -/* - * Define EXT3_RESERVATION to reserve data blocks for expanding files - */ -#define EXT3_DEFAULT_RESERVE_BLOCKS 8 -/*max window size: 1024(direct blocks) + 3([t,d]indirect blocks) */ -#define EXT3_MAX_RESERVE_BLOCKS 1027 -#define EXT3_RESERVE_WINDOW_NOT_ALLOCATED 0 - -/* - * Debug code - */ -#ifdef EXT3FS_DEBUG -#define ext3_debug(f, a...) \ - do { \ - printk (KERN_DEBUG "EXT3-fs DEBUG (%s, %d): %s:", \ - __FILE__, __LINE__, __func__); \ - printk (KERN_DEBUG f, ## a); \ - } while (0) -#else -#define ext3_debug(f, a...) do {} while (0) -#endif - -/* - * Special inodes numbers - */ -#define EXT3_BAD_INO 1 /* Bad blocks inode */ -#define EXT3_ROOT_INO 2 /* Root inode */ -#define EXT3_BOOT_LOADER_INO 5 /* Boot loader inode */ -#define EXT3_UNDEL_DIR_INO 6 /* Undelete directory inode */ -#define EXT3_RESIZE_INO 7 /* Reserved group descriptors inode */ -#define EXT3_JOURNAL_INO 8 /* Journal inode */ - -/* First non-reserved inode for old ext3 filesystems */ -#define EXT3_GOOD_OLD_FIRST_INO 11 - -/* - * Maximal count of links to a file - */ -#define EXT3_LINK_MAX 32000 - -/* - * Macro-instructions used to manage several block sizes - */ -#define EXT3_MIN_BLOCK_SIZE 1024 -#define EXT3_MAX_BLOCK_SIZE 65536 -#define EXT3_MIN_BLOCK_LOG_SIZE 10 -#define EXT3_BLOCK_SIZE(s) ((s)->s_blocksize) -#define EXT3_ADDR_PER_BLOCK(s) (EXT3_BLOCK_SIZE(s) / sizeof (__u32)) -#define EXT3_BLOCK_SIZE_BITS(s) ((s)->s_blocksize_bits) -#define EXT3_ADDR_PER_BLOCK_BITS(s) (EXT3_SB(s)->s_addr_per_block_bits) -#define EXT3_INODE_SIZE(s) (EXT3_SB(s)->s_inode_size) -#define EXT3_FIRST_INO(s) (EXT3_SB(s)->s_first_ino) - -/* - * Macro-instructions used to manage fragments - */ -#define EXT3_MIN_FRAG_SIZE 1024 -#define EXT3_MAX_FRAG_SIZE 4096 -#define EXT3_MIN_FRAG_LOG_SIZE 10 -#define EXT3_FRAG_SIZE(s) (EXT3_SB(s)->s_frag_size) -#define EXT3_FRAGS_PER_BLOCK(s) (EXT3_SB(s)->s_frags_per_block) - -/* - * Structure of a blocks group descriptor - */ -struct ext3_group_desc -{ - __le32 bg_block_bitmap; /* Blocks bitmap block */ - __le32 bg_inode_bitmap; /* Inodes bitmap block */ - __le32 bg_inode_table; /* Inodes table block */ - __le16 bg_free_blocks_count; /* Free blocks count */ - __le16 bg_free_inodes_count; /* Free inodes count */ - __le16 bg_used_dirs_count; /* Directories count */ - __u16 bg_pad; - __le32 bg_reserved[3]; -}; - -/* - * Macro-instructions used to manage group descriptors - */ -#define EXT3_BLOCKS_PER_GROUP(s) (EXT3_SB(s)->s_blocks_per_group) -#define EXT3_DESC_PER_BLOCK(s) (EXT3_SB(s)->s_desc_per_block) -#define EXT3_INODES_PER_GROUP(s) (EXT3_SB(s)->s_inodes_per_group) -#define EXT3_DESC_PER_BLOCK_BITS(s) (EXT3_SB(s)->s_desc_per_block_bits) - -/* - * Constants relative to the data blocks - */ -#define EXT3_NDIR_BLOCKS 12 -#define EXT3_IND_BLOCK EXT3_NDIR_BLOCKS -#define EXT3_DIND_BLOCK (EXT3_IND_BLOCK + 1) -#define EXT3_TIND_BLOCK (EXT3_DIND_BLOCK + 1) -#define EXT3_N_BLOCKS (EXT3_TIND_BLOCK + 1) - -/* - * Inode flags - */ -#define EXT3_SECRM_FL 0x00000001 /* Secure deletion */ -#define EXT3_UNRM_FL 0x00000002 /* Undelete */ -#define EXT3_COMPR_FL 0x00000004 /* Compress file */ -#define EXT3_SYNC_FL 0x00000008 /* Synchronous updates */ -#define EXT3_IMMUTABLE_FL 0x00000010 /* Immutable file */ -#define EXT3_APPEND_FL 0x00000020 /* writes to file may only append */ -#define EXT3_NODUMP_FL 0x00000040 /* do not dump file */ -#define EXT3_NOATIME_FL 0x00000080 /* do not update atime */ -/* Reserved for compression usage... */ -#define EXT3_DIRTY_FL 0x00000100 -#define EXT3_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */ -#define EXT3_NOCOMPR_FL 0x00000400 /* Don't compress */ -#define EXT3_ECOMPR_FL 0x00000800 /* Compression error */ -/* End compression flags --- maybe not all used */ -#define EXT3_INDEX_FL 0x00001000 /* hash-indexed directory */ -#define EXT3_IMAGIC_FL 0x00002000 /* AFS directory */ -#define EXT3_JOURNAL_DATA_FL 0x00004000 /* file data should be journaled */ -#define EXT3_NOTAIL_FL 0x00008000 /* file tail should not be merged */ -#define EXT3_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */ -#define EXT3_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/ -#define EXT3_RESERVED_FL 0x80000000 /* reserved for ext3 lib */ - -#define EXT3_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */ -#define EXT3_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */ - -/* Flags that should be inherited by new inodes from their parent. */ -#define EXT3_FL_INHERITED (EXT3_SECRM_FL | EXT3_UNRM_FL | EXT3_COMPR_FL |\ - EXT3_SYNC_FL | EXT3_NODUMP_FL |\ - EXT3_NOATIME_FL | EXT3_COMPRBLK_FL |\ - EXT3_NOCOMPR_FL | EXT3_JOURNAL_DATA_FL |\ - EXT3_NOTAIL_FL | EXT3_DIRSYNC_FL) - -/* Flags that are appropriate for regular files (all but dir-specific ones). */ -#define EXT3_REG_FLMASK (~(EXT3_DIRSYNC_FL | EXT3_TOPDIR_FL)) - -/* Flags that are appropriate for non-directories/regular files. */ -#define EXT3_OTHER_FLMASK (EXT3_NODUMP_FL | EXT3_NOATIME_FL) - -/* Mask out flags that are inappropriate for the given type of inode. */ -static inline __u32 ext3_mask_flags(umode_t mode, __u32 flags) -{ - if (S_ISDIR(mode)) - return flags; - else if (S_ISREG(mode)) - return flags & EXT3_REG_FLMASK; - else - return flags & EXT3_OTHER_FLMASK; -} - -/* Used to pass group descriptor data when online resize is done */ -struct ext3_new_group_input { - __u32 group; /* Group number for this data */ - __u32 block_bitmap; /* Absolute block number of block bitmap */ - __u32 inode_bitmap; /* Absolute block number of inode bitmap */ - __u32 inode_table; /* Absolute block number of inode table start */ - __u32 blocks_count; /* Total number of blocks in this group */ - __u16 reserved_blocks; /* Number of reserved blocks in this group */ - __u16 unused; -}; - -/* The struct ext3_new_group_input in kernel space, with free_blocks_count */ -struct ext3_new_group_data { - __u32 group; - __u32 block_bitmap; - __u32 inode_bitmap; - __u32 inode_table; - __u32 blocks_count; - __u16 reserved_blocks; - __u16 unused; - __u32 free_blocks_count; -}; - - -/* - * ioctl commands - */ -#define EXT3_IOC_GETFLAGS FS_IOC_GETFLAGS -#define EXT3_IOC_SETFLAGS FS_IOC_SETFLAGS -#define EXT3_IOC_GETVERSION _IOR('f', 3, long) -#define EXT3_IOC_SETVERSION _IOW('f', 4, long) -#define EXT3_IOC_GROUP_EXTEND _IOW('f', 7, unsigned long) -#define EXT3_IOC_GROUP_ADD _IOW('f', 8,struct ext3_new_group_input) -#define EXT3_IOC_GETVERSION_OLD FS_IOC_GETVERSION -#define EXT3_IOC_SETVERSION_OLD FS_IOC_SETVERSION -#ifdef CONFIG_JBD_DEBUG -#define EXT3_IOC_WAIT_FOR_READONLY _IOR('f', 99, long) -#endif -#define EXT3_IOC_GETRSVSZ _IOR('f', 5, long) -#define EXT3_IOC_SETRSVSZ _IOW('f', 6, long) - -/* - * ioctl commands in 32 bit emulation - */ -#define EXT3_IOC32_GETFLAGS FS_IOC32_GETFLAGS -#define EXT3_IOC32_SETFLAGS FS_IOC32_SETFLAGS -#define EXT3_IOC32_GETVERSION _IOR('f', 3, int) -#define EXT3_IOC32_SETVERSION _IOW('f', 4, int) -#define EXT3_IOC32_GETRSVSZ _IOR('f', 5, int) -#define EXT3_IOC32_SETRSVSZ _IOW('f', 6, int) -#define EXT3_IOC32_GROUP_EXTEND _IOW('f', 7, unsigned int) -#ifdef CONFIG_JBD_DEBUG -#define EXT3_IOC32_WAIT_FOR_READONLY _IOR('f', 99, int) -#endif -#define EXT3_IOC32_GETVERSION_OLD FS_IOC32_GETVERSION -#define EXT3_IOC32_SETVERSION_OLD FS_IOC32_SETVERSION - -/* Number of supported quota types */ -#define EXT3_MAXQUOTAS 2 - -/* - * Mount options - */ -struct ext3_mount_options { - unsigned long s_mount_opt; - kuid_t s_resuid; - kgid_t s_resgid; - unsigned long s_commit_interval; -#ifdef CONFIG_QUOTA - int s_jquota_fmt; - char *s_qf_names[EXT3_MAXQUOTAS]; -#endif -}; - -/* - * Structure of an inode on the disk - */ -struct ext3_inode { - __le16 i_mode; /* File mode */ - __le16 i_uid; /* Low 16 bits of Owner Uid */ - __le32 i_size; /* Size in bytes */ - __le32 i_atime; /* Access time */ - __le32 i_ctime; /* Creation time */ - __le32 i_mtime; /* Modification time */ - __le32 i_dtime; /* Deletion Time */ - __le16 i_gid; /* Low 16 bits of Group Id */ - __le16 i_links_count; /* Links count */ - __le32 i_blocks; /* Blocks count */ - __le32 i_flags; /* File flags */ - union { - struct { - __u32 l_i_reserved1; - } linux1; - struct { - __u32 h_i_translator; - } hurd1; - struct { - __u32 m_i_reserved1; - } masix1; - } osd1; /* OS dependent 1 */ - __le32 i_block[EXT3_N_BLOCKS];/* Pointers to blocks */ - __le32 i_generation; /* File version (for NFS) */ - __le32 i_file_acl; /* File ACL */ - __le32 i_dir_acl; /* Directory ACL */ - __le32 i_faddr; /* Fragment address */ - union { - struct { - __u8 l_i_frag; /* Fragment number */ - __u8 l_i_fsize; /* Fragment size */ - __u16 i_pad1; - __le16 l_i_uid_high; /* these 2 fields */ - __le16 l_i_gid_high; /* were reserved2[0] */ - __u32 l_i_reserved2; - } linux2; - struct { - __u8 h_i_frag; /* Fragment number */ - __u8 h_i_fsize; /* Fragment size */ - __u16 h_i_mode_high; - __u16 h_i_uid_high; - __u16 h_i_gid_high; - __u32 h_i_author; - } hurd2; - struct { - __u8 m_i_frag; /* Fragment number */ - __u8 m_i_fsize; /* Fragment size */ - __u16 m_pad1; - __u32 m_i_reserved2[2]; - } masix2; - } osd2; /* OS dependent 2 */ - __le16 i_extra_isize; - __le16 i_pad1; -}; - -#define i_size_high i_dir_acl - -#define i_reserved1 osd1.linux1.l_i_reserved1 -#define i_frag osd2.linux2.l_i_frag -#define i_fsize osd2.linux2.l_i_fsize -#define i_uid_low i_uid -#define i_gid_low i_gid -#define i_uid_high osd2.linux2.l_i_uid_high -#define i_gid_high osd2.linux2.l_i_gid_high -#define i_reserved2 osd2.linux2.l_i_reserved2 - -/* - * File system states - */ -#define EXT3_VALID_FS 0x0001 /* Unmounted cleanly */ -#define EXT3_ERROR_FS 0x0002 /* Errors detected */ -#define EXT3_ORPHAN_FS 0x0004 /* Orphans being recovered */ - -/* - * Misc. filesystem flags - */ -#define EXT2_FLAGS_SIGNED_HASH 0x0001 /* Signed dirhash in use */ -#define EXT2_FLAGS_UNSIGNED_HASH 0x0002 /* Unsigned dirhash in use */ -#define EXT2_FLAGS_TEST_FILESYS 0x0004 /* to test development code */ - -/* - * Mount flags - */ -#define EXT3_MOUNT_CHECK 0x00001 /* Do mount-time checks */ -/* EXT3_MOUNT_OLDALLOC was there */ -#define EXT3_MOUNT_GRPID 0x00004 /* Create files with directory's group */ -#define EXT3_MOUNT_DEBUG 0x00008 /* Some debugging messages */ -#define EXT3_MOUNT_ERRORS_CONT 0x00010 /* Continue on errors */ -#define EXT3_MOUNT_ERRORS_RO 0x00020 /* Remount fs ro on errors */ -#define EXT3_MOUNT_ERRORS_PANIC 0x00040 /* Panic on errors */ -#define EXT3_MOUNT_MINIX_DF 0x00080 /* Mimics the Minix statfs */ -#define EXT3_MOUNT_NOLOAD 0x00100 /* Don't use existing journal*/ -#define EXT3_MOUNT_ABORT 0x00200 /* Fatal error detected */ -#define EXT3_MOUNT_DATA_FLAGS 0x00C00 /* Mode for data writes: */ -#define EXT3_MOUNT_JOURNAL_DATA 0x00400 /* Write data to journal */ -#define EXT3_MOUNT_ORDERED_DATA 0x00800 /* Flush data before commit */ -#define EXT3_MOUNT_WRITEBACK_DATA 0x00C00 /* No data ordering */ -#define EXT3_MOUNT_UPDATE_JOURNAL 0x01000 /* Update the journal format */ -#define EXT3_MOUNT_NO_UID32 0x02000 /* Disable 32-bit UIDs */ -#define EXT3_MOUNT_XATTR_USER 0x04000 /* Extended user attributes */ -#define EXT3_MOUNT_POSIX_ACL 0x08000 /* POSIX Access Control Lists */ -#define EXT3_MOUNT_RESERVATION 0x10000 /* Preallocation */ -#define EXT3_MOUNT_BARRIER 0x20000 /* Use block barriers */ -#define EXT3_MOUNT_QUOTA 0x80000 /* Some quota option set */ -#define EXT3_MOUNT_USRQUOTA 0x100000 /* "old" user quota */ -#define EXT3_MOUNT_GRPQUOTA 0x200000 /* "old" group quota */ -#define EXT3_MOUNT_DATA_ERR_ABORT 0x400000 /* Abort on file data write - * error in ordered mode */ - -/* Compatibility, for having both ext2_fs.h and ext3_fs.h included at once */ -#ifndef _LINUX_EXT2_FS_H -#define clear_opt(o, opt) o &= ~EXT3_MOUNT_##opt -#define set_opt(o, opt) o |= EXT3_MOUNT_##opt -#define test_opt(sb, opt) (EXT3_SB(sb)->s_mount_opt & \ - EXT3_MOUNT_##opt) -#else -#define EXT2_MOUNT_NOLOAD EXT3_MOUNT_NOLOAD -#define EXT2_MOUNT_ABORT EXT3_MOUNT_ABORT -#define EXT2_MOUNT_DATA_FLAGS EXT3_MOUNT_DATA_FLAGS -#endif - -#define ext3_set_bit __set_bit_le -#define ext3_set_bit_atomic ext2_set_bit_atomic -#define ext3_clear_bit __clear_bit_le -#define ext3_clear_bit_atomic ext2_clear_bit_atomic -#define ext3_test_bit test_bit_le -#define ext3_find_next_zero_bit find_next_zero_bit_le - -/* - * Maximal mount counts between two filesystem checks - */ -#define EXT3_DFL_MAX_MNT_COUNT 20 /* Allow 20 mounts */ -#define EXT3_DFL_CHECKINTERVAL 0 /* Don't use interval check */ - -/* - * Behaviour when detecting errors - */ -#define EXT3_ERRORS_CONTINUE 1 /* Continue execution */ -#define EXT3_ERRORS_RO 2 /* Remount fs read-only */ -#define EXT3_ERRORS_PANIC 3 /* Panic */ -#define EXT3_ERRORS_DEFAULT EXT3_ERRORS_CONTINUE - -/* - * Structure of the super block - */ -struct ext3_super_block { -/*00*/ __le32 s_inodes_count; /* Inodes count */ - __le32 s_blocks_count; /* Blocks count */ - __le32 s_r_blocks_count; /* Reserved blocks count */ - __le32 s_free_blocks_count; /* Free blocks count */ -/*10*/ __le32 s_free_inodes_count; /* Free inodes count */ - __le32 s_first_data_block; /* First Data Block */ - __le32 s_log_block_size; /* Block size */ - __le32 s_log_frag_size; /* Fragment size */ -/*20*/ __le32 s_blocks_per_group; /* # Blocks per group */ - __le32 s_frags_per_group; /* # Fragments per group */ - __le32 s_inodes_per_group; /* # Inodes per group */ - __le32 s_mtime; /* Mount time */ -/*30*/ __le32 s_wtime; /* Write time */ - __le16 s_mnt_count; /* Mount count */ - __le16 s_max_mnt_count; /* Maximal mount count */ - __le16 s_magic; /* Magic signature */ - __le16 s_state; /* File system state */ - __le16 s_errors; /* Behaviour when detecting errors */ - __le16 s_minor_rev_level; /* minor revision level */ -/*40*/ __le32 s_lastcheck; /* time of last check */ - __le32 s_checkinterval; /* max. time between checks */ - __le32 s_creator_os; /* OS */ - __le32 s_rev_level; /* Revision level */ -/*50*/ __le16 s_def_resuid; /* Default uid for reserved blocks */ - __le16 s_def_resgid; /* Default gid for reserved blocks */ - /* - * These fields are for EXT3_DYNAMIC_REV superblocks only. - * - * Note: the difference between the compatible feature set and - * the incompatible feature set is that if there is a bit set - * in the incompatible feature set that the kernel doesn't - * know about, it should refuse to mount the filesystem. - * - * e2fsck's requirements are more strict; if it doesn't know - * about a feature in either the compatible or incompatible - * feature set, it must abort and not try to meddle with - * things it doesn't understand... - */ - __le32 s_first_ino; /* First non-reserved inode */ - __le16 s_inode_size; /* size of inode structure */ - __le16 s_block_group_nr; /* block group # of this superblock */ - __le32 s_feature_compat; /* compatible feature set */ -/*60*/ __le32 s_feature_incompat; /* incompatible feature set */ - __le32 s_feature_ro_compat; /* readonly-compatible feature set */ -/*68*/ __u8 s_uuid[16]; /* 128-bit uuid for volume */ -/*78*/ char s_volume_name[16]; /* volume name */ -/*88*/ char s_last_mounted[64]; /* directory where last mounted */ -/*C8*/ __le32 s_algorithm_usage_bitmap; /* For compression */ - /* - * Performance hints. Directory preallocation should only - * happen if the EXT3_FEATURE_COMPAT_DIR_PREALLOC flag is on. - */ - __u8 s_prealloc_blocks; /* Nr of blocks to try to preallocate*/ - __u8 s_prealloc_dir_blocks; /* Nr to preallocate for dirs */ - __le16 s_reserved_gdt_blocks; /* Per group desc for online growth */ - /* - * Journaling support valid if EXT3_FEATURE_COMPAT_HAS_JOURNAL set. - */ -/*D0*/ __u8 s_journal_uuid[16]; /* uuid of journal superblock */ -/*E0*/ __le32 s_journal_inum; /* inode number of journal file */ - __le32 s_journal_dev; /* device number of journal file */ - __le32 s_last_orphan; /* start of list of inodes to delete */ - __le32 s_hash_seed[4]; /* HTREE hash seed */ - __u8 s_def_hash_version; /* Default hash version to use */ - __u8 s_reserved_char_pad; - __u16 s_reserved_word_pad; - __le32 s_default_mount_opts; - __le32 s_first_meta_bg; /* First metablock block group */ - __le32 s_mkfs_time; /* When the filesystem was created */ - __le32 s_jnl_blocks[17]; /* Backup of the journal inode */ - /* 64bit support valid if EXT4_FEATURE_COMPAT_64BIT */ -/*150*/ __le32 s_blocks_count_hi; /* Blocks count */ - __le32 s_r_blocks_count_hi; /* Reserved blocks count */ - __le32 s_free_blocks_count_hi; /* Free blocks count */ - __le16 s_min_extra_isize; /* All inodes have at least # bytes */ - __le16 s_want_extra_isize; /* New inodes should reserve # bytes */ - __le32 s_flags; /* Miscellaneous flags */ - __le16 s_raid_stride; /* RAID stride */ - __le16 s_mmp_interval; /* # seconds to wait in MMP checking */ - __le64 s_mmp_block; /* Block for multi-mount protection */ - __le32 s_raid_stripe_width; /* blocks on all data disks (N*stride)*/ - __u8 s_log_groups_per_flex; /* FLEX_BG group size */ - __u8 s_reserved_char_pad2; - __le16 s_reserved_pad; - __u32 s_reserved[162]; /* Padding to the end of the block */ -}; - -/* data type for block offset of block group */ -typedef int ext3_grpblk_t; - -/* data type for filesystem-wide blocks number */ -typedef unsigned long ext3_fsblk_t; - -#define E3FSBLK "%lu" - -struct ext3_reserve_window { - ext3_fsblk_t _rsv_start; /* First byte reserved */ - ext3_fsblk_t _rsv_end; /* Last byte reserved or 0 */ -}; - -struct ext3_reserve_window_node { - struct rb_node rsv_node; - __u32 rsv_goal_size; - __u32 rsv_alloc_hit; - struct ext3_reserve_window rsv_window; -}; - -struct ext3_block_alloc_info { - /* information about reservation window */ - struct ext3_reserve_window_node rsv_window_node; - /* - * was i_next_alloc_block in ext3_inode_info - * is the logical (file-relative) number of the - * most-recently-allocated block in this file. - * We use this for detecting linearly ascending allocation requests. - */ - __u32 last_alloc_logical_block; - /* - * Was i_next_alloc_goal in ext3_inode_info - * is the *physical* companion to i_next_alloc_block. - * it the physical block number of the block which was most-recentl - * allocated to this file. This give us the goal (target) for the next - * allocation when we detect linearly ascending requests. - */ - ext3_fsblk_t last_alloc_physical_block; -}; - -#define rsv_start rsv_window._rsv_start -#define rsv_end rsv_window._rsv_end - -/* - * third extended file system inode data in memory - */ -struct ext3_inode_info { - __le32 i_data[15]; /* unconverted */ - __u32 i_flags; -#ifdef EXT3_FRAGMENTS - __u32 i_faddr; - __u8 i_frag_no; - __u8 i_frag_size; -#endif - ext3_fsblk_t i_file_acl; - __u32 i_dir_acl; - __u32 i_dtime; - - /* - * i_block_group is the number of the block group which contains - * this file's inode. Constant across the lifetime of the inode, - * it is ued for making block allocation decisions - we try to - * place a file's data blocks near its inode block, and new inodes - * near to their parent directory's inode. - */ - __u32 i_block_group; - unsigned long i_state_flags; /* Dynamic state flags for ext3 */ - - /* block reservation info */ - struct ext3_block_alloc_info *i_block_alloc_info; - - __u32 i_dir_start_lookup; -#ifdef CONFIG_EXT3_FS_XATTR - /* - * Extended attributes can be read independently of the main file - * data. Taking i_mutex even when reading would cause contention - * between readers of EAs and writers of regular file data, so - * instead we synchronize on xattr_sem when reading or changing - * EAs. - */ - struct rw_semaphore xattr_sem; -#endif - - struct list_head i_orphan; /* unlinked but open inodes */ - - /* - * i_disksize keeps track of what the inode size is ON DISK, not - * in memory. During truncate, i_size is set to the new size by - * the VFS prior to calling ext3_truncate(), but the filesystem won't - * set i_disksize to 0 until the truncate is actually under way. - * - * The intent is that i_disksize always represents the blocks which - * are used by this file. This allows recovery to restart truncate - * on orphans if we crash during truncate. We actually write i_disksize - * into the on-disk inode when writing inodes out, instead of i_size. - * - * The only time when i_disksize and i_size may be different is when - * a truncate is in progress. The only things which change i_disksize - * are ext3_get_block (growth) and ext3_truncate (shrinkth). - */ - loff_t i_disksize; - - /* on-disk additional length */ - __u16 i_extra_isize; - - /* - * truncate_mutex is for serialising ext3_truncate() against - * ext3_getblock(). In the 2.4 ext2 design, great chunks of inode's - * data tree are chopped off during truncate. We can't do that in - * ext3 because whenever we perform intermediate commits during - * truncate, the inode and all the metadata blocks *must* be in a - * consistent state which allows truncation of the orphans to restart - * during recovery. Hence we must fix the get_block-vs-truncate race - * by other means, so we have truncate_mutex. - */ - struct mutex truncate_mutex; - - /* - * Transactions that contain inode's metadata needed to complete - * fsync and fdatasync, respectively. - */ - atomic_t i_sync_tid; - atomic_t i_datasync_tid; - -#ifdef CONFIG_QUOTA - struct dquot *i_dquot[MAXQUOTAS]; -#endif - - struct inode vfs_inode; -}; - -/* - * third extended-fs super-block data in memory - */ -struct ext3_sb_info { - unsigned long s_frag_size; /* Size of a fragment in bytes */ - unsigned long s_frags_per_block;/* Number of fragments per block */ - unsigned long s_inodes_per_block;/* Number of inodes per block */ - unsigned long s_frags_per_group;/* Number of fragments in a group */ - unsigned long s_blocks_per_group;/* Number of blocks in a group */ - unsigned long s_inodes_per_group;/* Number of inodes in a group */ - unsigned long s_itb_per_group; /* Number of inode table blocks per group */ - unsigned long s_gdb_count; /* Number of group descriptor blocks */ - unsigned long s_desc_per_block; /* Number of group descriptors per block */ - unsigned long s_groups_count; /* Number of groups in the fs */ - unsigned long s_overhead_last; /* Last calculated overhead */ - unsigned long s_blocks_last; /* Last seen block count */ - struct buffer_head * s_sbh; /* Buffer containing the super block */ - struct ext3_super_block * s_es; /* Pointer to the super block in the buffer */ - struct buffer_head ** s_group_desc; - unsigned long s_mount_opt; - ext3_fsblk_t s_sb_block; - kuid_t s_resuid; - kgid_t s_resgid; - unsigned short s_mount_state; - unsigned short s_pad; - int s_addr_per_block_bits; - int s_desc_per_block_bits; - int s_inode_size; - int s_first_ino; - spinlock_t s_next_gen_lock; - u32 s_next_generation; - u32 s_hash_seed[4]; - int s_def_hash_version; - int s_hash_unsigned; /* 3 if hash should be signed, 0 if not */ - struct percpu_counter s_freeblocks_counter; - struct percpu_counter s_freeinodes_counter; - struct percpu_counter s_dirs_counter; - struct blockgroup_lock *s_blockgroup_lock; - - /* root of the per fs reservation window tree */ - spinlock_t s_rsv_window_lock; - struct rb_root s_rsv_window_root; - struct ext3_reserve_window_node s_rsv_window_head; - - /* Journaling */ - struct inode * s_journal_inode; - struct journal_s * s_journal; - struct list_head s_orphan; - struct mutex s_orphan_lock; - struct mutex s_resize_lock; - unsigned long s_commit_interval; - struct block_device *journal_bdev; -#ifdef CONFIG_QUOTA - char *s_qf_names[EXT3_MAXQUOTAS]; /* Names of quota files with journalled quota */ - int s_jquota_fmt; /* Format of quota to use */ -#endif -}; - -static inline spinlock_t * -sb_bgl_lock(struct ext3_sb_info *sbi, unsigned int block_group) -{ - return bgl_lock_ptr(sbi->s_blockgroup_lock, block_group); -} - -static inline struct ext3_sb_info * EXT3_SB(struct super_block *sb) -{ - return sb->s_fs_info; -} -static inline struct ext3_inode_info *EXT3_I(struct inode *inode) -{ - return container_of(inode, struct ext3_inode_info, vfs_inode); -} - -static inline int ext3_valid_inum(struct super_block *sb, unsigned long ino) -{ - return ino == EXT3_ROOT_INO || - ino == EXT3_JOURNAL_INO || - ino == EXT3_RESIZE_INO || - (ino >= EXT3_FIRST_INO(sb) && - ino <= le32_to_cpu(EXT3_SB(sb)->s_es->s_inodes_count)); -} - -/* - * Inode dynamic state flags - */ -enum { - EXT3_STATE_JDATA, /* journaled data exists */ - EXT3_STATE_NEW, /* inode is newly created */ - EXT3_STATE_XATTR, /* has in-inode xattrs */ - EXT3_STATE_FLUSH_ON_CLOSE, /* flush dirty pages on close */ -}; - -static inline int ext3_test_inode_state(struct inode *inode, int bit) -{ - return test_bit(bit, &EXT3_I(inode)->i_state_flags); -} - -static inline void ext3_set_inode_state(struct inode *inode, int bit) -{ - set_bit(bit, &EXT3_I(inode)->i_state_flags); -} - -static inline void ext3_clear_inode_state(struct inode *inode, int bit) -{ - clear_bit(bit, &EXT3_I(inode)->i_state_flags); -} - -#define NEXT_ORPHAN(inode) EXT3_I(inode)->i_dtime - -/* - * Codes for operating systems - */ -#define EXT3_OS_LINUX 0 -#define EXT3_OS_HURD 1 -#define EXT3_OS_MASIX 2 -#define EXT3_OS_FREEBSD 3 -#define EXT3_OS_LITES 4 - -/* - * Revision levels - */ -#define EXT3_GOOD_OLD_REV 0 /* The good old (original) format */ -#define EXT3_DYNAMIC_REV 1 /* V2 format w/ dynamic inode sizes */ - -#define EXT3_CURRENT_REV EXT3_GOOD_OLD_REV -#define EXT3_MAX_SUPP_REV EXT3_DYNAMIC_REV - -#define EXT3_GOOD_OLD_INODE_SIZE 128 - -/* - * Feature set definitions - */ - -#define EXT3_HAS_COMPAT_FEATURE(sb,mask) \ - ( EXT3_SB(sb)->s_es->s_feature_compat & cpu_to_le32(mask) ) -#define EXT3_HAS_RO_COMPAT_FEATURE(sb,mask) \ - ( EXT3_SB(sb)->s_es->s_feature_ro_compat & cpu_to_le32(mask) ) -#define EXT3_HAS_INCOMPAT_FEATURE(sb,mask) \ - ( EXT3_SB(sb)->s_es->s_feature_incompat & cpu_to_le32(mask) ) -#define EXT3_SET_COMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_compat |= cpu_to_le32(mask) -#define EXT3_SET_RO_COMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_ro_compat |= cpu_to_le32(mask) -#define EXT3_SET_INCOMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_incompat |= cpu_to_le32(mask) -#define EXT3_CLEAR_COMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_compat &= ~cpu_to_le32(mask) -#define EXT3_CLEAR_RO_COMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_ro_compat &= ~cpu_to_le32(mask) -#define EXT3_CLEAR_INCOMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_incompat &= ~cpu_to_le32(mask) - -#define EXT3_FEATURE_COMPAT_DIR_PREALLOC 0x0001 -#define EXT3_FEATURE_COMPAT_IMAGIC_INODES 0x0002 -#define EXT3_FEATURE_COMPAT_HAS_JOURNAL 0x0004 -#define EXT3_FEATURE_COMPAT_EXT_ATTR 0x0008 -#define EXT3_FEATURE_COMPAT_RESIZE_INODE 0x0010 -#define EXT3_FEATURE_COMPAT_DIR_INDEX 0x0020 - -#define EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER 0x0001 -#define EXT3_FEATURE_RO_COMPAT_LARGE_FILE 0x0002 -#define EXT3_FEATURE_RO_COMPAT_BTREE_DIR 0x0004 - -#define EXT3_FEATURE_INCOMPAT_COMPRESSION 0x0001 -#define EXT3_FEATURE_INCOMPAT_FILETYPE 0x0002 -#define EXT3_FEATURE_INCOMPAT_RECOVER 0x0004 /* Needs recovery */ -#define EXT3_FEATURE_INCOMPAT_JOURNAL_DEV 0x0008 /* Journal device */ -#define EXT3_FEATURE_INCOMPAT_META_BG 0x0010 - -#define EXT3_FEATURE_COMPAT_SUPP EXT2_FEATURE_COMPAT_EXT_ATTR -#define EXT3_FEATURE_INCOMPAT_SUPP (EXT3_FEATURE_INCOMPAT_FILETYPE| \ - EXT3_FEATURE_INCOMPAT_RECOVER| \ - EXT3_FEATURE_INCOMPAT_META_BG) -#define EXT3_FEATURE_RO_COMPAT_SUPP (EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER| \ - EXT3_FEATURE_RO_COMPAT_LARGE_FILE| \ - EXT3_FEATURE_RO_COMPAT_BTREE_DIR) - -/* - * Default values for user and/or group using reserved blocks - */ -#define EXT3_DEF_RESUID 0 -#define EXT3_DEF_RESGID 0 - -/* - * Default mount options - */ -#define EXT3_DEFM_DEBUG 0x0001 -#define EXT3_DEFM_BSDGROUPS 0x0002 -#define EXT3_DEFM_XATTR_USER 0x0004 -#define EXT3_DEFM_ACL 0x0008 -#define EXT3_DEFM_UID16 0x0010 -#define EXT3_DEFM_JMODE 0x0060 -#define EXT3_DEFM_JMODE_DATA 0x0020 -#define EXT3_DEFM_JMODE_ORDERED 0x0040 -#define EXT3_DEFM_JMODE_WBACK 0x0060 - -/* - * Structure of a directory entry - */ -#define EXT3_NAME_LEN 255 - -struct ext3_dir_entry { - __le32 inode; /* Inode number */ - __le16 rec_len; /* Directory entry length */ - __le16 name_len; /* Name length */ - char name[EXT3_NAME_LEN]; /* File name */ -}; - -/* - * The new version of the directory entry. Since EXT3 structures are - * stored in intel byte order, and the name_len field could never be - * bigger than 255 chars, it's safe to reclaim the extra byte for the - * file_type field. - */ -struct ext3_dir_entry_2 { - __le32 inode; /* Inode number */ - __le16 rec_len; /* Directory entry length */ - __u8 name_len; /* Name length */ - __u8 file_type; - char name[EXT3_NAME_LEN]; /* File name */ -}; - -/* - * Ext3 directory file types. Only the low 3 bits are used. The - * other bits are reserved for now. - */ -#define EXT3_FT_UNKNOWN 0 -#define EXT3_FT_REG_FILE 1 -#define EXT3_FT_DIR 2 -#define EXT3_FT_CHRDEV 3 -#define EXT3_FT_BLKDEV 4 -#define EXT3_FT_FIFO 5 -#define EXT3_FT_SOCK 6 -#define EXT3_FT_SYMLINK 7 - -#define EXT3_FT_MAX 8 - -/* - * EXT3_DIR_PAD defines the directory entries boundaries - * - * NOTE: It must be a multiple of 4 - */ -#define EXT3_DIR_PAD 4 -#define EXT3_DIR_ROUND (EXT3_DIR_PAD - 1) -#define EXT3_DIR_REC_LEN(name_len) (((name_len) + 8 + EXT3_DIR_ROUND) & \ - ~EXT3_DIR_ROUND) -#define EXT3_MAX_REC_LEN ((1<<16)-1) - -/* - * Tests against MAX_REC_LEN etc were put in place for 64k block - * sizes; if that is not possible on this arch, we can skip - * those tests and speed things up. - */ -static inline unsigned ext3_rec_len_from_disk(__le16 dlen) -{ - unsigned len = le16_to_cpu(dlen); - -#if (PAGE_CACHE_SIZE >= 65536) - if (len == EXT3_MAX_REC_LEN) - return 1 << 16; -#endif - return len; -} - -static inline __le16 ext3_rec_len_to_disk(unsigned len) -{ -#if (PAGE_CACHE_SIZE >= 65536) - if (len == (1 << 16)) - return cpu_to_le16(EXT3_MAX_REC_LEN); - else if (len > (1 << 16)) - BUG(); -#endif - return cpu_to_le16(len); -} - -/* - * Hash Tree Directory indexing - * (c) Daniel Phillips, 2001 - */ - -#define is_dx(dir) (EXT3_HAS_COMPAT_FEATURE(dir->i_sb, \ - EXT3_FEATURE_COMPAT_DIR_INDEX) && \ - (EXT3_I(dir)->i_flags & EXT3_INDEX_FL)) -#define EXT3_DIR_LINK_MAX(dir) (!is_dx(dir) && (dir)->i_nlink >= EXT3_LINK_MAX) -#define EXT3_DIR_LINK_EMPTY(dir) ((dir)->i_nlink == 2 || (dir)->i_nlink == 1) - -/* Legal values for the dx_root hash_version field: */ - -#define DX_HASH_LEGACY 0 -#define DX_HASH_HALF_MD4 1 -#define DX_HASH_TEA 2 -#define DX_HASH_LEGACY_UNSIGNED 3 -#define DX_HASH_HALF_MD4_UNSIGNED 4 -#define DX_HASH_TEA_UNSIGNED 5 - -/* hash info structure used by the directory hash */ -struct dx_hash_info -{ - u32 hash; - u32 minor_hash; - int hash_version; - u32 *seed; -}; - - -/* 32 and 64 bit signed EOF for dx directories */ -#define EXT3_HTREE_EOF_32BIT ((1UL << (32 - 1)) - 1) -#define EXT3_HTREE_EOF_64BIT ((1ULL << (64 - 1)) - 1) - - -/* - * Control parameters used by ext3_htree_next_block - */ -#define HASH_NB_ALWAYS 1 - - -/* - * Describe an inode's exact location on disk and in memory - */ -struct ext3_iloc -{ - struct buffer_head *bh; - unsigned long offset; - unsigned long block_group; -}; - -static inline struct ext3_inode *ext3_raw_inode(struct ext3_iloc *iloc) -{ - return (struct ext3_inode *) (iloc->bh->b_data + iloc->offset); -} - -/* - * This structure is stuffed into the struct file's private_data field - * for directories. It is where we put information so that we can do - * readdir operations in hash tree order. - */ -struct dir_private_info { - struct rb_root root; - struct rb_node *curr_node; - struct fname *extra_fname; - loff_t last_pos; - __u32 curr_hash; - __u32 curr_minor_hash; - __u32 next_hash; -}; - -/* calculate the first block number of the group */ -static inline ext3_fsblk_t -ext3_group_first_block_no(struct super_block *sb, unsigned long group_no) -{ - return group_no * (ext3_fsblk_t)EXT3_BLOCKS_PER_GROUP(sb) + - le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block); -} - -/* - * Special error return code only used by dx_probe() and its callers. - */ -#define ERR_BAD_DX_DIR -75000 - -/* - * Function prototypes - */ - -/* - * Ok, these declarations are also in <linux/kernel.h> but none of the - * ext3 source programs needs to include it so they are duplicated here. - */ -# define NORET_TYPE /**/ -# define ATTRIB_NORET __attribute__((noreturn)) -# define NORET_AND noreturn, - -/* balloc.c */ -extern int ext3_bg_has_super(struct super_block *sb, int group); -extern unsigned long ext3_bg_num_gdb(struct super_block *sb, int group); -extern ext3_fsblk_t ext3_new_block (handle_t *handle, struct inode *inode, - ext3_fsblk_t goal, int *errp); -extern ext3_fsblk_t ext3_new_blocks (handle_t *handle, struct inode *inode, - ext3_fsblk_t goal, unsigned long *count, int *errp); -extern void ext3_free_blocks (handle_t *handle, struct inode *inode, - ext3_fsblk_t block, unsigned long count); -extern void ext3_free_blocks_sb (handle_t *handle, struct super_block *sb, - ext3_fsblk_t block, unsigned long count, - unsigned long *pdquot_freed_blocks); -extern ext3_fsblk_t ext3_count_free_blocks (struct super_block *); -extern void ext3_check_blocks_bitmap (struct super_block *); -extern struct ext3_group_desc * ext3_get_group_desc(struct super_block * sb, - unsigned int block_group, - struct buffer_head ** bh); -extern int ext3_should_retry_alloc(struct super_block *sb, int *retries); -extern void ext3_init_block_alloc_info(struct inode *); -extern void ext3_rsv_window_add(struct super_block *sb, struct ext3_reserve_window_node *rsv); -extern int ext3_trim_fs(struct super_block *sb, struct fstrim_range *range); - -/* dir.c */ -extern int ext3_check_dir_entry(const char *, struct inode *, - struct ext3_dir_entry_2 *, - struct buffer_head *, unsigned long); -extern int ext3_htree_store_dirent(struct file *dir_file, __u32 hash, - __u32 minor_hash, - struct ext3_dir_entry_2 *dirent); -extern void ext3_htree_free_dir_info(struct dir_private_info *p); - -/* fsync.c */ -extern int ext3_sync_file(struct file *, loff_t, loff_t, int); - -/* hash.c */ -extern int ext3fs_dirhash(const char *name, int len, struct - dx_hash_info *hinfo); - -/* ialloc.c */ -extern struct inode * ext3_new_inode (handle_t *, struct inode *, - const struct qstr *, umode_t); -extern void ext3_free_inode (handle_t *, struct inode *); -extern struct inode * ext3_orphan_get (struct super_block *, unsigned long); -extern unsigned long ext3_count_free_inodes (struct super_block *); -extern unsigned long ext3_count_dirs (struct super_block *); -extern void ext3_check_inodes_bitmap (struct super_block *); -extern unsigned long ext3_count_free (struct buffer_head *, unsigned); - - -/* inode.c */ -int ext3_forget(handle_t *handle, int is_metadata, struct inode *inode, - struct buffer_head *bh, ext3_fsblk_t blocknr); -struct buffer_head * ext3_getblk (handle_t *, struct inode *, long, int, int *); -struct buffer_head * ext3_bread (handle_t *, struct inode *, int, int, int *); -int ext3_get_blocks_handle(handle_t *handle, struct inode *inode, - sector_t iblock, unsigned long maxblocks, struct buffer_head *bh_result, - int create); - -extern struct inode *ext3_iget(struct super_block *, unsigned long); -extern int ext3_write_inode (struct inode *, struct writeback_control *); -extern int ext3_setattr (struct dentry *, struct iattr *); -extern void ext3_evict_inode (struct inode *); -extern int ext3_sync_inode (handle_t *, struct inode *); -extern void ext3_discard_reservation (struct inode *); -extern void ext3_dirty_inode(struct inode *, int); -extern int ext3_change_inode_journal_flag(struct inode *, int); -extern int ext3_get_inode_loc(struct inode *, struct ext3_iloc *); -extern int ext3_can_truncate(struct inode *inode); -extern void ext3_truncate(struct inode *inode); -extern void ext3_set_inode_flags(struct inode *); -extern void ext3_get_inode_flags(struct ext3_inode_info *); -extern void ext3_set_aops(struct inode *inode); -extern int ext3_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, - u64 start, u64 len); - -/* ioctl.c */ -extern long ext3_ioctl(struct file *, unsigned int, unsigned long); -extern long ext3_compat_ioctl(struct file *, unsigned int, unsigned long); - -/* namei.c */ -extern int ext3_orphan_add(handle_t *, struct inode *); -extern int ext3_orphan_del(handle_t *, struct inode *); -extern int ext3_htree_fill_tree(struct file *dir_file, __u32 start_hash, - __u32 start_minor_hash, __u32 *next_hash); - -/* resize.c */ -extern int ext3_group_add(struct super_block *sb, - struct ext3_new_group_data *input); -extern int ext3_group_extend(struct super_block *sb, - struct ext3_super_block *es, - ext3_fsblk_t n_blocks_count); - -/* super.c */ -extern __printf(3, 4) -void ext3_error(struct super_block *, const char *, const char *, ...); -extern void __ext3_std_error (struct super_block *, const char *, int); -extern __printf(3, 4) -void ext3_abort(struct super_block *, const char *, const char *, ...); -extern __printf(3, 4) -void ext3_warning(struct super_block *, const char *, const char *, ...); -extern __printf(3, 4) -void ext3_msg(struct super_block *, const char *, const char *, ...); -extern void ext3_update_dynamic_rev (struct super_block *sb); - -#define ext3_std_error(sb, errno) \ -do { \ - if ((errno)) \ - __ext3_std_error((sb), __func__, (errno)); \ -} while (0) - -/* - * Inodes and files operations - */ - -/* dir.c */ -extern const struct file_operations ext3_dir_operations; - -/* file.c */ -extern const struct inode_operations ext3_file_inode_operations; -extern const struct file_operations ext3_file_operations; - -/* namei.c */ -extern const struct inode_operations ext3_dir_inode_operations; -extern const struct inode_operations ext3_special_inode_operations; - -/* symlink.c */ -extern const struct inode_operations ext3_symlink_inode_operations; -extern const struct inode_operations ext3_fast_symlink_inode_operations; - -#define EXT3_JOURNAL(inode) (EXT3_SB((inode)->i_sb)->s_journal) - -/* Define the number of blocks we need to account to a transaction to - * modify one block of data. - * - * We may have to touch one inode, one bitmap buffer, up to three - * indirection blocks, the group and superblock summaries, and the data - * block to complete the transaction. */ - -#define EXT3_SINGLEDATA_TRANS_BLOCKS 8U - -/* Extended attribute operations touch at most two data buffers, - * two bitmap buffers, and two group summaries, in addition to the inode - * and the superblock, which are already accounted for. */ - -#define EXT3_XATTR_TRANS_BLOCKS 6U - -/* Define the minimum size for a transaction which modifies data. This - * needs to take into account the fact that we may end up modifying two - * quota files too (one for the group, one for the user quota). The - * superblock only gets updated once, of course, so don't bother - * counting that again for the quota updates. */ - -#define EXT3_DATA_TRANS_BLOCKS(sb) (EXT3_SINGLEDATA_TRANS_BLOCKS + \ - EXT3_XATTR_TRANS_BLOCKS - 2 + \ - EXT3_MAXQUOTAS_TRANS_BLOCKS(sb)) - -/* Delete operations potentially hit one directory's namespace plus an - * entire inode, plus arbitrary amounts of bitmap/indirection data. Be - * generous. We can grow the delete transaction later if necessary. */ - -#define EXT3_DELETE_TRANS_BLOCKS(sb) (EXT3_MAXQUOTAS_TRANS_BLOCKS(sb) + 64) - -/* Define an arbitrary limit for the amount of data we will anticipate - * writing to any given transaction. For unbounded transactions such as - * write(2) and truncate(2) we can write more than this, but we always - * start off at the maximum transaction size and grow the transaction - * optimistically as we go. */ - -#define EXT3_MAX_TRANS_DATA 64U - -/* We break up a large truncate or write transaction once the handle's - * buffer credits gets this low, we need either to extend the - * transaction or to start a new one. Reserve enough space here for - * inode, bitmap, superblock, group and indirection updates for at least - * one block, plus two quota updates. Quota allocations are not - * needed. */ - -#define EXT3_RESERVE_TRANS_BLOCKS 12U - -#define EXT3_INDEX_EXTRA_TRANS_BLOCKS 8 - -#ifdef CONFIG_QUOTA -/* Amount of blocks needed for quota update - we know that the structure was - * allocated so we need to update only inode+data */ -#define EXT3_QUOTA_TRANS_BLOCKS(sb) (test_opt(sb, QUOTA) ? 2 : 0) -/* Amount of blocks needed for quota insert/delete - we do some block writes - * but inode, sb and group updates are done only once */ -#define EXT3_QUOTA_INIT_BLOCKS(sb) (test_opt(sb, QUOTA) ? (DQUOT_INIT_ALLOC*\ - (EXT3_SINGLEDATA_TRANS_BLOCKS-3)+3+DQUOT_INIT_REWRITE) : 0) -#define EXT3_QUOTA_DEL_BLOCKS(sb) (test_opt(sb, QUOTA) ? (DQUOT_DEL_ALLOC*\ - (EXT3_SINGLEDATA_TRANS_BLOCKS-3)+3+DQUOT_DEL_REWRITE) : 0) -#else -#define EXT3_QUOTA_TRANS_BLOCKS(sb) 0 -#define EXT3_QUOTA_INIT_BLOCKS(sb) 0 -#define EXT3_QUOTA_DEL_BLOCKS(sb) 0 -#endif -#define EXT3_MAXQUOTAS_TRANS_BLOCKS(sb) (EXT3_MAXQUOTAS*EXT3_QUOTA_TRANS_BLOCKS(sb)) -#define EXT3_MAXQUOTAS_INIT_BLOCKS(sb) (EXT3_MAXQUOTAS*EXT3_QUOTA_INIT_BLOCKS(sb)) -#define EXT3_MAXQUOTAS_DEL_BLOCKS(sb) (EXT3_MAXQUOTAS*EXT3_QUOTA_DEL_BLOCKS(sb)) - -int -ext3_mark_iloc_dirty(handle_t *handle, - struct inode *inode, - struct ext3_iloc *iloc); - -/* - * On success, We end up with an outstanding reference count against - * iloc->bh. This _must_ be cleaned up later. - */ - -int ext3_reserve_inode_write(handle_t *handle, struct inode *inode, - struct ext3_iloc *iloc); - -int ext3_mark_inode_dirty(handle_t *handle, struct inode *inode); - -/* - * Wrapper functions with which ext3 calls into JBD. The intent here is - * to allow these to be turned into appropriate stubs so ext3 can control - * ext2 filesystems, so ext2+ext3 systems only nee one fs. This work hasn't - * been done yet. - */ - -static inline void ext3_journal_release_buffer(handle_t *handle, - struct buffer_head *bh) -{ - journal_release_buffer(handle, bh); -} - -void ext3_journal_abort_handle(const char *caller, const char *err_fn, - struct buffer_head *bh, handle_t *handle, int err); - -int __ext3_journal_get_undo_access(const char *where, handle_t *handle, - struct buffer_head *bh); - -int __ext3_journal_get_write_access(const char *where, handle_t *handle, - struct buffer_head *bh); - -int __ext3_journal_forget(const char *where, handle_t *handle, - struct buffer_head *bh); - -int __ext3_journal_revoke(const char *where, handle_t *handle, - unsigned long blocknr, struct buffer_head *bh); - -int __ext3_journal_get_create_access(const char *where, - handle_t *handle, struct buffer_head *bh); - -int __ext3_journal_dirty_metadata(const char *where, - handle_t *handle, struct buffer_head *bh); - -#define ext3_journal_get_undo_access(handle, bh) \ - __ext3_journal_get_undo_access(__func__, (handle), (bh)) -#define ext3_journal_get_write_access(handle, bh) \ - __ext3_journal_get_write_access(__func__, (handle), (bh)) -#define ext3_journal_revoke(handle, blocknr, bh) \ - __ext3_journal_revoke(__func__, (handle), (blocknr), (bh)) -#define ext3_journal_get_create_access(handle, bh) \ - __ext3_journal_get_create_access(__func__, (handle), (bh)) -#define ext3_journal_dirty_metadata(handle, bh) \ - __ext3_journal_dirty_metadata(__func__, (handle), (bh)) -#define ext3_journal_forget(handle, bh) \ - __ext3_journal_forget(__func__, (handle), (bh)) - -int ext3_journal_dirty_data(handle_t *handle, struct buffer_head *bh); - -handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks); -int __ext3_journal_stop(const char *where, handle_t *handle); - -static inline handle_t *ext3_journal_start(struct inode *inode, int nblocks) -{ - return ext3_journal_start_sb(inode->i_sb, nblocks); -} - -#define ext3_journal_stop(handle) \ - __ext3_journal_stop(__func__, (handle)) - -static inline handle_t *ext3_journal_current_handle(void) -{ - return journal_current_handle(); -} - -static inline int ext3_journal_extend(handle_t *handle, int nblocks) -{ - return journal_extend(handle, nblocks); -} - -static inline int ext3_journal_restart(handle_t *handle, int nblocks) -{ - return journal_restart(handle, nblocks); -} - -static inline int ext3_journal_blocks_per_page(struct inode *inode) -{ - return journal_blocks_per_page(inode); -} - -static inline int ext3_journal_force_commit(journal_t *journal) -{ - return journal_force_commit(journal); -} - -/* super.c */ -int ext3_force_commit(struct super_block *sb); - -static inline int ext3_should_journal_data(struct inode *inode) -{ - if (!S_ISREG(inode->i_mode)) - return 1; - if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA) - return 1; - if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL) - return 1; - return 0; -} - -static inline int ext3_should_order_data(struct inode *inode) -{ - if (!S_ISREG(inode->i_mode)) - return 0; - if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL) - return 0; - if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA) - return 1; - return 0; -} - -static inline int ext3_should_writeback_data(struct inode *inode) -{ - if (!S_ISREG(inode->i_mode)) - return 0; - if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL) - return 0; - if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA) - return 1; - return 0; -} - -#include <trace/events/ext3.h> diff --git a/fs/ext3/ext3_jbd.c b/fs/ext3/ext3_jbd.c deleted file mode 100644 index 785a326..0000000 --- a/fs/ext3/ext3_jbd.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Interface between ext3 and JBD - */ - -#include "ext3.h" - -int __ext3_journal_get_undo_access(const char *where, handle_t *handle, - struct buffer_head *bh) -{ - int err = journal_get_undo_access(handle, bh); - if (err) - ext3_journal_abort_handle(where, __func__, bh, handle,err); - return err; -} - -int __ext3_journal_get_write_access(const char *where, handle_t *handle, - struct buffer_head *bh) -{ - int err = journal_get_write_access(handle, bh); - if (err) - ext3_journal_abort_handle(where, __func__, bh, handle,err); - return err; -} - -int __ext3_journal_forget(const char *where, handle_t *handle, - struct buffer_head *bh) -{ - int err = journal_forget(handle, bh); - if (err) - ext3_journal_abort_handle(where, __func__, bh, handle,err); - return err; -} - -int __ext3_journal_revoke(const char *where, handle_t *handle, - unsigned long blocknr, struct buffer_head *bh) -{ - int err = journal_revoke(handle, blocknr, bh); - if (err) - ext3_journal_abort_handle(where, __func__, bh, handle,err); - return err; -} - -int __ext3_journal_get_create_access(const char *where, - handle_t *handle, struct buffer_head *bh) -{ - int err = journal_get_create_access(handle, bh); - if (err) - ext3_journal_abort_handle(where, __func__, bh, handle,err); - return err; -} - -int __ext3_journal_dirty_metadata(const char *where, - handle_t *handle, struct buffer_head *bh) -{ - int err = journal_dirty_metadata(handle, bh); - if (err) - ext3_journal_abort_handle(where, __func__, bh, handle,err); - return err; -} diff --git a/fs/ext3/file.c b/fs/ext3/file.c deleted file mode 100644 index 3b8f650..0000000 --- a/fs/ext3/file.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * linux/fs/ext3/file.c - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/fs/minix/file.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * ext3 fs regular file handling primitives - * - * 64-bit file support on 64-bit platforms by Jakub Jelinek - * (jj@sunsite.ms.mff.cuni.cz) - */ - -#include <linux/quotaops.h> -#include "ext3.h" -#include "xattr.h" -#include "acl.h" - -/* - * Called when an inode is released. Note that this is different - * from ext3_file_open: open gets called at every open, but release - * gets called only when /all/ the files are closed. - */ -static int ext3_release_file (struct inode * inode, struct file * filp) -{ - if (ext3_test_inode_state(inode, EXT3_STATE_FLUSH_ON_CLOSE)) { - filemap_flush(inode->i_mapping); - ext3_clear_inode_state(inode, EXT3_STATE_FLUSH_ON_CLOSE); - } - /* if we are the last writer on the inode, drop the block reservation */ - if ((filp->f_mode & FMODE_WRITE) && - (atomic_read(&inode->i_writecount) == 1)) - { - mutex_lock(&EXT3_I(inode)->truncate_mutex); - ext3_discard_reservation(inode); - mutex_unlock(&EXT3_I(inode)->truncate_mutex); - } - if (is_dx(inode) && filp->private_data) - ext3_htree_free_dir_info(filp->private_data); - - return 0; -} - -const struct file_operations ext3_file_operations = { - .llseek = generic_file_llseek, - .read_iter = generic_file_read_iter, - .write_iter = generic_file_write_iter, - .unlocked_ioctl = ext3_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = ext3_compat_ioctl, -#endif - .mmap = generic_file_mmap, - .open = dquot_file_open, - .release = ext3_release_file, - .fsync = ext3_sync_file, - .splice_read = generic_file_splice_read, - .splice_write = iter_file_splice_write, -}; - -const struct inode_operations ext3_file_inode_operations = { - .setattr = ext3_setattr, -#ifdef CONFIG_EXT3_FS_XATTR - .setxattr = generic_setxattr, - .getxattr = generic_getxattr, - .listxattr = ext3_listxattr, - .removexattr = generic_removexattr, -#endif - .get_acl = ext3_get_acl, - .set_acl = ext3_set_acl, - .fiemap = ext3_fiemap, -}; - diff --git a/fs/ext3/fsync.c b/fs/ext3/fsync.c deleted file mode 100644 index 1cb9c7e..0000000 --- a/fs/ext3/fsync.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * linux/fs/ext3/fsync.c - * - * Copyright (C) 1993 Stephen Tweedie (sct@redhat.com) - * from - * Copyright (C) 1992 Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * from - * linux/fs/minix/truncate.c Copyright (C) 1991, 1992 Linus Torvalds - * - * ext3fs fsync primitive - * - * Big-endian to little-endian byte-swapping/bitmaps by - * David S. Miller (davem@caip.rutgers.edu), 1995 - * - * Removed unnecessary code duplication for little endian machines - * and excessive __inline__s. - * Andi Kleen, 1997 - * - * Major simplications and cleanup - we only need to do the metadata, because - * we can depend on generic_block_fdatasync() to sync the data blocks. - */ - -#include <linux/blkdev.h> -#include <linux/writeback.h> -#include "ext3.h" - -/* - * akpm: A new design for ext3_sync_file(). - * - * This is only called from sys_fsync(), sys_fdatasync() and sys_msync(). - * There cannot be a transaction open by this task. - * Another task could have dirtied this inode. Its data can be in any - * state in the journalling system. - * - * What we do is just kick off a commit and wait on it. This will snapshot the - * inode to disk. - */ - -int ext3_sync_file(struct file *file, loff_t start, loff_t end, int datasync) -{ - struct inode *inode = file->f_mapping->host; - struct ext3_inode_info *ei = EXT3_I(inode); - journal_t *journal = EXT3_SB(inode->i_sb)->s_journal; - int ret, needs_barrier = 0; - tid_t commit_tid; - - trace_ext3_sync_file_enter(file, datasync); - - if (inode->i_sb->s_flags & MS_RDONLY) { - /* Make sure that we read updated state */ - smp_rmb(); - if (EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ERROR_FS) - return -EROFS; - return 0; - } - ret = filemap_write_and_wait_range(inode->i_mapping, start, end); - if (ret) - goto out; - - J_ASSERT(ext3_journal_current_handle() == NULL); - - /* - * data=writeback,ordered: - * The caller's filemap_fdatawrite()/wait will sync the data. - * Metadata is in the journal, we wait for a proper transaction - * to commit here. - * - * data=journal: - * filemap_fdatawrite won't do anything (the buffers are clean). - * ext3_force_commit will write the file data into the journal and - * will wait on that. - * filemap_fdatawait() will encounter a ton of newly-dirtied pages - * (they were dirtied by commit). But that's OK - the blocks are - * safe in-journal, which is all fsync() needs to ensure. - */ - if (ext3_should_journal_data(inode)) { - ret = ext3_force_commit(inode->i_sb); - goto out; - } - - if (datasync) - commit_tid = atomic_read(&ei->i_datasync_tid); - else - commit_tid = atomic_read(&ei->i_sync_tid); - - if (test_opt(inode->i_sb, BARRIER) && - !journal_trans_will_send_data_barrier(journal, commit_tid)) - needs_barrier = 1; - log_start_commit(journal, commit_tid); - ret = log_wait_commit(journal, commit_tid); - - /* - * In case we didn't commit a transaction, we have to flush - * disk caches manually so that data really is on persistent - * storage - */ - if (needs_barrier) { - int err; - - err = blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL); - if (!ret) - ret = err; - } -out: - trace_ext3_sync_file_exit(inode, ret); - return ret; -} diff --git a/fs/ext3/hash.c b/fs/ext3/hash.c deleted file mode 100644 index ede315c..0000000 --- a/fs/ext3/hash.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * linux/fs/ext3/hash.c - * - * Copyright (C) 2002 by Theodore Ts'o - * - * This file is released under the GPL v2. - * - * This file may be redistributed under the terms of the GNU Public - * License. - */ - -#include "ext3.h" -#include <linux/cryptohash.h> - -#define DELTA 0x9E3779B9 - -static void TEA_transform(__u32 buf[4], __u32 const in[]) -{ - __u32 sum = 0; - __u32 b0 = buf[0], b1 = buf[1]; - __u32 a = in[0], b = in[1], c = in[2], d = in[3]; - int n = 16; - - do { - sum += DELTA; - b0 += ((b1 << 4)+a) ^ (b1+sum) ^ ((b1 >> 5)+b); - b1 += ((b0 << 4)+c) ^ (b0+sum) ^ ((b0 >> 5)+d); - } while(--n); - - buf[0] += b0; - buf[1] += b1; -} - - -/* The old legacy hash */ -static __u32 dx_hack_hash_unsigned(const char *name, int len) -{ - __u32 hash, hash0 = 0x12a3fe2d, hash1 = 0x37abe8f9; - const unsigned char *ucp = (const unsigned char *) name; - - while (len--) { - hash = hash1 + (hash0 ^ (((int) *ucp++) * 7152373)); - - if (hash & 0x80000000) - hash -= 0x7fffffff; - hash1 = hash0; - hash0 = hash; - } - return hash0 << 1; -} - -static __u32 dx_hack_hash_signed(const char *name, int len) -{ - __u32 hash, hash0 = 0x12a3fe2d, hash1 = 0x37abe8f9; - const signed char *scp = (const signed char *) name; - - while (len--) { - hash = hash1 + (hash0 ^ (((int) *scp++) * 7152373)); - - if (hash & 0x80000000) - hash -= 0x7fffffff; - hash1 = hash0; - hash0 = hash; - } - return hash0 << 1; -} - -static void str2hashbuf_signed(const char *msg, int len, __u32 *buf, int num) -{ - __u32 pad, val; - int i; - const signed char *scp = (const signed char *) msg; - - pad = (__u32)len | ((__u32)len << 8); - pad |= pad << 16; - - val = pad; - if (len > num*4) - len = num * 4; - for (i = 0; i < len; i++) { - if ((i % 4) == 0) - val = pad; - val = ((int) scp[i]) + (val << 8); - if ((i % 4) == 3) { - *buf++ = val; - val = pad; - num--; - } - } - if (--num >= 0) - *buf++ = val; - while (--num >= 0) - *buf++ = pad; -} - -static void str2hashbuf_unsigned(const char *msg, int len, __u32 *buf, int num) -{ - __u32 pad, val; - int i; - const unsigned char *ucp = (const unsigned char *) msg; - - pad = (__u32)len | ((__u32)len << 8); - pad |= pad << 16; - - val = pad; - if (len > num*4) - len = num * 4; - for (i=0; i < len; i++) { - if ((i % 4) == 0) - val = pad; - val = ((int) ucp[i]) + (val << 8); - if ((i % 4) == 3) { - *buf++ = val; - val = pad; - num--; - } - } - if (--num >= 0) - *buf++ = val; - while (--num >= 0) - *buf++ = pad; -} - -/* - * Returns the hash of a filename. If len is 0 and name is NULL, then - * this function can be used to test whether or not a hash version is - * supported. - * - * The seed is an 4 longword (32 bits) "secret" which can be used to - * uniquify a hash. If the seed is all zero's, then some default seed - * may be used. - * - * A particular hash version specifies whether or not the seed is - * represented, and whether or not the returned hash is 32 bits or 64 - * bits. 32 bit hashes will return 0 for the minor hash. - */ -int ext3fs_dirhash(const char *name, int len, struct dx_hash_info *hinfo) -{ - __u32 hash; - __u32 minor_hash = 0; - const char *p; - int i; - __u32 in[8], buf[4]; - void (*str2hashbuf)(const char *, int, __u32 *, int) = - str2hashbuf_signed; - - /* Initialize the default seed for the hash checksum functions */ - buf[0] = 0x67452301; - buf[1] = 0xefcdab89; - buf[2] = 0x98badcfe; - buf[3] = 0x10325476; - - /* Check to see if the seed is all zero's */ - if (hinfo->seed) { - for (i=0; i < 4; i++) { - if (hinfo->seed[i]) - break; - } - if (i < 4) - memcpy(buf, hinfo->seed, sizeof(buf)); - } - - switch (hinfo->hash_version) { - case DX_HASH_LEGACY_UNSIGNED: - hash = dx_hack_hash_unsigned(name, len); - break; - case DX_HASH_LEGACY: - hash = dx_hack_hash_signed(name, len); - break; - case DX_HASH_HALF_MD4_UNSIGNED: - str2hashbuf = str2hashbuf_unsigned; - case DX_HASH_HALF_MD4: - p = name; - while (len > 0) { - (*str2hashbuf)(p, len, in, 8); - half_md4_transform(buf, in); - len -= 32; - p += 32; - } - minor_hash = buf[2]; - hash = buf[1]; - break; - case DX_HASH_TEA_UNSIGNED: - str2hashbuf = str2hashbuf_unsigned; - case DX_HASH_TEA: - p = name; - while (len > 0) { - (*str2hashbuf)(p, len, in, 4); - TEA_transform(buf, in); - len -= 16; - p += 16; - } - hash = buf[0]; - minor_hash = buf[1]; - break; - default: - hinfo->hash = 0; - return -1; - } - hash = hash & ~1; - if (hash == (EXT3_HTREE_EOF_32BIT << 1)) - hash = (EXT3_HTREE_EOF_32BIT - 1) << 1; - hinfo->hash = hash; - hinfo->minor_hash = minor_hash; - return 0; -} diff --git a/fs/ext3/ialloc.c b/fs/ext3/ialloc.c deleted file mode 100644 index 3ad242e..0000000 --- a/fs/ext3/ialloc.c +++ /dev/null @@ -1,706 +0,0 @@ -/* - * linux/fs/ext3/ialloc.c - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * BSD ufs-inspired inode and directory allocation by - * Stephen Tweedie (sct@redhat.com), 1993 - * Big-endian to little-endian byte-swapping/bitmaps by - * David S. Miller (davem@caip.rutgers.edu), 1995 - */ - -#include <linux/quotaops.h> -#include <linux/random.h> - -#include "ext3.h" -#include "xattr.h" -#include "acl.h" - -/* - * ialloc.c contains the inodes allocation and deallocation routines - */ - -/* - * The free inodes are managed by bitmaps. A file system contains several - * blocks groups. Each group contains 1 bitmap block for blocks, 1 bitmap - * block for inodes, N blocks for the inode table and data blocks. - * - * The file system contains group descriptors which are located after the - * super block. Each descriptor contains the number of the bitmap block and - * the free blocks count in the block. - */ - - -/* - * Read the inode allocation bitmap for a given block_group, reading - * into the specified slot in the superblock's bitmap cache. - * - * Return buffer_head of bitmap on success or NULL. - */ -static struct buffer_head * -read_inode_bitmap(struct super_block * sb, unsigned long block_group) -{ - struct ext3_group_desc *desc; - struct buffer_head *bh = NULL; - - desc = ext3_get_group_desc(sb, block_group, NULL); - if (!desc) - goto error_out; - - bh = sb_bread(sb, le32_to_cpu(desc->bg_inode_bitmap)); - if (!bh) - ext3_error(sb, "read_inode_bitmap", - "Cannot read inode bitmap - " - "block_group = %lu, inode_bitmap = %u", - block_group, le32_to_cpu(desc->bg_inode_bitmap)); -error_out: - return bh; -} - -/* - * NOTE! When we get the inode, we're the only people - * that have access to it, and as such there are no - * race conditions we have to worry about. The inode - * is not on the hash-lists, and it cannot be reached - * through the filesystem because the directory entry - * has been deleted earlier. - * - * HOWEVER: we must make sure that we get no aliases, - * which means that we have to call "clear_inode()" - * _before_ we mark the inode not in use in the inode - * bitmaps. Otherwise a newly created file might use - * the same inode number (not actually the same pointer - * though), and then we'd have two inodes sharing the - * same inode number and space on the harddisk. - */ -void ext3_free_inode (handle_t *handle, struct inode * inode) -{ - struct super_block * sb = inode->i_sb; - int is_directory; - unsigned long ino; - struct buffer_head *bitmap_bh = NULL; - struct buffer_head *bh2; - unsigned long block_group; - unsigned long bit; - struct ext3_group_desc * gdp; - struct ext3_super_block * es; - struct ext3_sb_info *sbi; - int fatal = 0, err; - - if (atomic_read(&inode->i_count) > 1) { - printk ("ext3_free_inode: inode has count=%d\n", - atomic_read(&inode->i_count)); - return; - } - if (inode->i_nlink) { - printk ("ext3_free_inode: inode has nlink=%d\n", - inode->i_nlink); - return; - } - if (!sb) { - printk("ext3_free_inode: inode on nonexistent device\n"); - return; - } - sbi = EXT3_SB(sb); - - ino = inode->i_ino; - ext3_debug ("freeing inode %lu\n", ino); - trace_ext3_free_inode(inode); - - is_directory = S_ISDIR(inode->i_mode); - - es = EXT3_SB(sb)->s_es; - if (ino < EXT3_FIRST_INO(sb) || ino > le32_to_cpu(es->s_inodes_count)) { - ext3_error (sb, "ext3_free_inode", - "reserved or nonexistent inode %lu", ino); - goto error_return; - } - block_group = (ino - 1) / EXT3_INODES_PER_GROUP(sb); - bit = (ino - 1) % EXT3_INODES_PER_GROUP(sb); - bitmap_bh = read_inode_bitmap(sb, block_group); - if (!bitmap_bh) - goto error_return; - - BUFFER_TRACE(bitmap_bh, "get_write_access"); - fatal = ext3_journal_get_write_access(handle, bitmap_bh); - if (fatal) - goto error_return; - - /* Ok, now we can actually update the inode bitmaps.. */ - if (!ext3_clear_bit_atomic(sb_bgl_lock(sbi, block_group), - bit, bitmap_bh->b_data)) - ext3_error (sb, "ext3_free_inode", - "bit already cleared for inode %lu", ino); - else { - gdp = ext3_get_group_desc (sb, block_group, &bh2); - - BUFFER_TRACE(bh2, "get_write_access"); - fatal = ext3_journal_get_write_access(handle, bh2); - if (fatal) goto error_return; - - if (gdp) { - spin_lock(sb_bgl_lock(sbi, block_group)); - le16_add_cpu(&gdp->bg_free_inodes_count, 1); - if (is_directory) - le16_add_cpu(&gdp->bg_used_dirs_count, -1); - spin_unlock(sb_bgl_lock(sbi, block_group)); - percpu_counter_inc(&sbi->s_freeinodes_counter); - if (is_directory) - percpu_counter_dec(&sbi->s_dirs_counter); - - } - BUFFER_TRACE(bh2, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, bh2); - if (!fatal) fatal = err; - } - BUFFER_TRACE(bitmap_bh, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, bitmap_bh); - if (!fatal) - fatal = err; - -error_return: - brelse(bitmap_bh); - ext3_std_error(sb, fatal); -} - -/* - * Orlov's allocator for directories. - * - * We always try to spread first-level directories. - * - * If there are blockgroups with both free inodes and free blocks counts - * not worse than average we return one with smallest directory count. - * Otherwise we simply return a random group. - * - * For the rest rules look so: - * - * It's OK to put directory into a group unless - * it has too many directories already (max_dirs) or - * it has too few free inodes left (min_inodes) or - * it has too few free blocks left (min_blocks). - * Parent's group is preferred, if it doesn't satisfy these - * conditions we search cyclically through the rest. If none - * of the groups look good we just look for a group with more - * free inodes than average (starting at parent's group). - * - * Debt is incremented each time we allocate a directory and decremented - * when we allocate an inode, within 0--255. - */ - -static int find_group_orlov(struct super_block *sb, struct inode *parent) -{ - int parent_group = EXT3_I(parent)->i_block_group; - struct ext3_sb_info *sbi = EXT3_SB(sb); - int ngroups = sbi->s_groups_count; - int inodes_per_group = EXT3_INODES_PER_GROUP(sb); - unsigned int freei, avefreei; - ext3_fsblk_t freeb, avefreeb; - unsigned int ndirs; - int max_dirs, min_inodes; - ext3_grpblk_t min_blocks; - int group = -1, i; - struct ext3_group_desc *desc; - - freei = percpu_counter_read_positive(&sbi->s_freeinodes_counter); - avefreei = freei / ngroups; - freeb = percpu_counter_read_positive(&sbi->s_freeblocks_counter); - avefreeb = freeb / ngroups; - ndirs = percpu_counter_read_positive(&sbi->s_dirs_counter); - - if ((parent == d_inode(sb->s_root)) || - (EXT3_I(parent)->i_flags & EXT3_TOPDIR_FL)) { - int best_ndir = inodes_per_group; - int best_group = -1; - - group = prandom_u32(); - parent_group = (unsigned)group % ngroups; - for (i = 0; i < ngroups; i++) { - group = (parent_group + i) % ngroups; - desc = ext3_get_group_desc (sb, group, NULL); - if (!desc || !desc->bg_free_inodes_count) - continue; - if (le16_to_cpu(desc->bg_used_dirs_count) >= best_ndir) - continue; - if (le16_to_cpu(desc->bg_free_inodes_count) < avefreei) - continue; - if (le16_to_cpu(desc->bg_free_blocks_count) < avefreeb) - continue; - best_group = group; - best_ndir = le16_to_cpu(desc->bg_used_dirs_count); - } - if (best_group >= 0) - return best_group; - goto fallback; - } - - max_dirs = ndirs / ngroups + inodes_per_group / 16; - min_inodes = avefreei - inodes_per_group / 4; - min_blocks = avefreeb - EXT3_BLOCKS_PER_GROUP(sb) / 4; - - for (i = 0; i < ngroups; i++) { - group = (parent_group + i) % ngroups; - desc = ext3_get_group_desc (sb, group, NULL); - if (!desc || !desc->bg_free_inodes_count) - continue; - if (le16_to_cpu(desc->bg_used_dirs_count) >= max_dirs) - continue; - if (le16_to_cpu(desc->bg_free_inodes_count) < min_inodes) - continue; - if (le16_to_cpu(desc->bg_free_blocks_count) < min_blocks) - continue; - return group; - } - -fallback: - for (i = 0; i < ngroups; i++) { - group = (parent_group + i) % ngroups; - desc = ext3_get_group_desc (sb, group, NULL); - if (!desc || !desc->bg_free_inodes_count) - continue; - if (le16_to_cpu(desc->bg_free_inodes_count) >= avefreei) - return group; - } - - if (avefreei) { - /* - * The free-inodes counter is approximate, and for really small - * filesystems the above test can fail to find any blockgroups - */ - avefreei = 0; - goto fallback; - } - - return -1; -} - -static int find_group_other(struct super_block *sb, struct inode *parent) -{ - int parent_group = EXT3_I(parent)->i_block_group; - int ngroups = EXT3_SB(sb)->s_groups_count; - struct ext3_group_desc *desc; - int group, i; - - /* - * Try to place the inode in its parent directory - */ - group = parent_group; - desc = ext3_get_group_desc (sb, group, NULL); - if (desc && le16_to_cpu(desc->bg_free_inodes_count) && - le16_to_cpu(desc->bg_free_blocks_count)) - return group; - - /* - * We're going to place this inode in a different blockgroup from its - * parent. We want to cause files in a common directory to all land in - * the same blockgroup. But we want files which are in a different - * directory which shares a blockgroup with our parent to land in a - * different blockgroup. - * - * So add our directory's i_ino into the starting point for the hash. - */ - group = (group + parent->i_ino) % ngroups; - - /* - * Use a quadratic hash to find a group with a free inode and some free - * blocks. - */ - for (i = 1; i < ngroups; i <<= 1) { - group += i; - if (group >= ngroups) - group -= ngroups; - desc = ext3_get_group_desc (sb, group, NULL); - if (desc && le16_to_cpu(desc->bg_free_inodes_count) && - le16_to_cpu(desc->bg_free_blocks_count)) - return group; - } - - /* - * That failed: try linear search for a free inode, even if that group - * has no free blocks. - */ - group = parent_group; - for (i = 0; i < ngroups; i++) { - if (++group >= ngroups) - group = 0; - desc = ext3_get_group_desc (sb, group, NULL); - if (desc && le16_to_cpu(desc->bg_free_inodes_count)) - return group; - } - - return -1; -} - -/* - * There are two policies for allocating an inode. If the new inode is - * a directory, then a forward search is made for a block group with both - * free space and a low directory-to-inode ratio; if that fails, then of - * the groups with above-average free space, that group with the fewest - * directories already is chosen. - * - * For other inodes, search forward from the parent directory's block - * group to find a free inode. - */ -struct inode *ext3_new_inode(handle_t *handle, struct inode * dir, - const struct qstr *qstr, umode_t mode) -{ - struct super_block *sb; - struct buffer_head *bitmap_bh = NULL; - struct buffer_head *bh2; - int group; - unsigned long ino = 0; - struct inode * inode; - struct ext3_group_desc * gdp = NULL; - struct ext3_super_block * es; - struct ext3_inode_info *ei; - struct ext3_sb_info *sbi; - int err = 0; - struct inode *ret; - int i; - - /* Cannot create files in a deleted directory */ - if (!dir || !dir->i_nlink) - return ERR_PTR(-EPERM); - - sb = dir->i_sb; - trace_ext3_request_inode(dir, mode); - inode = new_inode(sb); - if (!inode) - return ERR_PTR(-ENOMEM); - ei = EXT3_I(inode); - - sbi = EXT3_SB(sb); - es = sbi->s_es; - if (S_ISDIR(mode)) - group = find_group_orlov(sb, dir); - else - group = find_group_other(sb, dir); - - err = -ENOSPC; - if (group == -1) - goto out; - - for (i = 0; i < sbi->s_groups_count; i++) { - err = -EIO; - - gdp = ext3_get_group_desc(sb, group, &bh2); - if (!gdp) - goto fail; - - brelse(bitmap_bh); - bitmap_bh = read_inode_bitmap(sb, group); - if (!bitmap_bh) - goto fail; - - ino = 0; - -repeat_in_this_group: - ino = ext3_find_next_zero_bit((unsigned long *) - bitmap_bh->b_data, EXT3_INODES_PER_GROUP(sb), ino); - if (ino < EXT3_INODES_PER_GROUP(sb)) { - - BUFFER_TRACE(bitmap_bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, bitmap_bh); - if (err) - goto fail; - - if (!ext3_set_bit_atomic(sb_bgl_lock(sbi, group), - ino, bitmap_bh->b_data)) { - /* we won it */ - BUFFER_TRACE(bitmap_bh, - "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, - bitmap_bh); - if (err) - goto fail; - goto got; - } - /* we lost it */ - journal_release_buffer(handle, bitmap_bh); - - if (++ino < EXT3_INODES_PER_GROUP(sb)) - goto repeat_in_this_group; - } - - /* - * This case is possible in concurrent environment. It is very - * rare. We cannot repeat the find_group_xxx() call because - * that will simply return the same blockgroup, because the - * group descriptor metadata has not yet been updated. - * So we just go onto the next blockgroup. - */ - if (++group == sbi->s_groups_count) - group = 0; - } - err = -ENOSPC; - goto out; - -got: - ino += group * EXT3_INODES_PER_GROUP(sb) + 1; - if (ino < EXT3_FIRST_INO(sb) || ino > le32_to_cpu(es->s_inodes_count)) { - ext3_error (sb, "ext3_new_inode", - "reserved inode or inode > inodes count - " - "block_group = %d, inode=%lu", group, ino); - err = -EIO; - goto fail; - } - - BUFFER_TRACE(bh2, "get_write_access"); - err = ext3_journal_get_write_access(handle, bh2); - if (err) goto fail; - spin_lock(sb_bgl_lock(sbi, group)); - le16_add_cpu(&gdp->bg_free_inodes_count, -1); - if (S_ISDIR(mode)) { - le16_add_cpu(&gdp->bg_used_dirs_count, 1); - } - spin_unlock(sb_bgl_lock(sbi, group)); - BUFFER_TRACE(bh2, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, bh2); - if (err) goto fail; - - percpu_counter_dec(&sbi->s_freeinodes_counter); - if (S_ISDIR(mode)) - percpu_counter_inc(&sbi->s_dirs_counter); - - - if (test_opt(sb, GRPID)) { - inode->i_mode = mode; - inode->i_uid = current_fsuid(); - inode->i_gid = dir->i_gid; - } else - inode_init_owner(inode, dir, mode); - - inode->i_ino = ino; - /* This is the optimal IO size (for stat), not the fs block size */ - inode->i_blocks = 0; - inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC; - - memset(ei->i_data, 0, sizeof(ei->i_data)); - ei->i_dir_start_lookup = 0; - ei->i_disksize = 0; - - ei->i_flags = - ext3_mask_flags(mode, EXT3_I(dir)->i_flags & EXT3_FL_INHERITED); -#ifdef EXT3_FRAGMENTS - ei->i_faddr = 0; - ei->i_frag_no = 0; - ei->i_frag_size = 0; -#endif - ei->i_file_acl = 0; - ei->i_dir_acl = 0; - ei->i_dtime = 0; - ei->i_block_alloc_info = NULL; - ei->i_block_group = group; - - ext3_set_inode_flags(inode); - if (IS_DIRSYNC(inode)) - handle->h_sync = 1; - if (insert_inode_locked(inode) < 0) { - /* - * Likely a bitmap corruption causing inode to be allocated - * twice. - */ - err = -EIO; - goto fail; - } - spin_lock(&sbi->s_next_gen_lock); - inode->i_generation = sbi->s_next_generation++; - spin_unlock(&sbi->s_next_gen_lock); - - ei->i_state_flags = 0; - ext3_set_inode_state(inode, EXT3_STATE_NEW); - - /* See comment in ext3_iget for explanation */ - if (ino >= EXT3_FIRST_INO(sb) + 1 && - EXT3_INODE_SIZE(sb) > EXT3_GOOD_OLD_INODE_SIZE) { - ei->i_extra_isize = - sizeof(struct ext3_inode) - EXT3_GOOD_OLD_INODE_SIZE; - } else { - ei->i_extra_isize = 0; - } - - ret = inode; - dquot_initialize(inode); - err = dquot_alloc_inode(inode); - if (err) - goto fail_drop; - - err = ext3_init_acl(handle, inode, dir); - if (err) - goto fail_free_drop; - - err = ext3_init_security(handle, inode, dir, qstr); - if (err) - goto fail_free_drop; - - err = ext3_mark_inode_dirty(handle, inode); - if (err) { - ext3_std_error(sb, err); - goto fail_free_drop; - } - - ext3_debug("allocating inode %lu\n", inode->i_ino); - trace_ext3_allocate_inode(inode, dir, mode); - goto really_out; -fail: - ext3_std_error(sb, err); -out: - iput(inode); - ret = ERR_PTR(err); -really_out: - brelse(bitmap_bh); - return ret; - -fail_free_drop: - dquot_free_inode(inode); - -fail_drop: - dquot_drop(inode); - inode->i_flags |= S_NOQUOTA; - clear_nlink(inode); - unlock_new_inode(inode); - iput(inode); - brelse(bitmap_bh); - return ERR_PTR(err); -} - -/* Verify that we are loading a valid orphan from disk */ -struct inode *ext3_orphan_get(struct super_block *sb, unsigned long ino) -{ - unsigned long max_ino = le32_to_cpu(EXT3_SB(sb)->s_es->s_inodes_count); - unsigned long block_group; - int bit; - struct buffer_head *bitmap_bh; - struct inode *inode = NULL; - long err = -EIO; - - /* Error cases - e2fsck has already cleaned up for us */ - if (ino > max_ino) { - ext3_warning(sb, __func__, - "bad orphan ino %lu! e2fsck was run?", ino); - goto error; - } - - block_group = (ino - 1) / EXT3_INODES_PER_GROUP(sb); - bit = (ino - 1) % EXT3_INODES_PER_GROUP(sb); - bitmap_bh = read_inode_bitmap(sb, block_group); - if (!bitmap_bh) { - ext3_warning(sb, __func__, - "inode bitmap error for orphan %lu", ino); - goto error; - } - - /* Having the inode bit set should be a 100% indicator that this - * is a valid orphan (no e2fsck run on fs). Orphans also include - * inodes that were being truncated, so we can't check i_nlink==0. - */ - if (!ext3_test_bit(bit, bitmap_bh->b_data)) - goto bad_orphan; - - inode = ext3_iget(sb, ino); - if (IS_ERR(inode)) - goto iget_failed; - - /* - * If the orphans has i_nlinks > 0 then it should be able to be - * truncated, otherwise it won't be removed from the orphan list - * during processing and an infinite loop will result. - */ - if (inode->i_nlink && !ext3_can_truncate(inode)) - goto bad_orphan; - - if (NEXT_ORPHAN(inode) > max_ino) - goto bad_orphan; - brelse(bitmap_bh); - return inode; - -iget_failed: - err = PTR_ERR(inode); - inode = NULL; -bad_orphan: - ext3_warning(sb, __func__, - "bad orphan inode %lu! e2fsck was run?", ino); - printk(KERN_NOTICE "ext3_test_bit(bit=%d, block=%llu) = %d\n", - bit, (unsigned long long)bitmap_bh->b_blocknr, - ext3_test_bit(bit, bitmap_bh->b_data)); - printk(KERN_NOTICE "inode=%p\n", inode); - if (inode) { - printk(KERN_NOTICE "is_bad_inode(inode)=%d\n", - is_bad_inode(inode)); - printk(KERN_NOTICE "NEXT_ORPHAN(inode)=%u\n", - NEXT_ORPHAN(inode)); - printk(KERN_NOTICE "max_ino=%lu\n", max_ino); - printk(KERN_NOTICE "i_nlink=%u\n", inode->i_nlink); - /* Avoid freeing blocks if we got a bad deleted inode */ - if (inode->i_nlink == 0) - inode->i_blocks = 0; - iput(inode); - } - brelse(bitmap_bh); -error: - return ERR_PTR(err); -} - -unsigned long ext3_count_free_inodes (struct super_block * sb) -{ - unsigned long desc_count; - struct ext3_group_desc *gdp; - int i; -#ifdef EXT3FS_DEBUG - struct ext3_super_block *es; - unsigned long bitmap_count, x; - struct buffer_head *bitmap_bh = NULL; - - es = EXT3_SB(sb)->s_es; - desc_count = 0; - bitmap_count = 0; - gdp = NULL; - for (i = 0; i < EXT3_SB(sb)->s_groups_count; i++) { - gdp = ext3_get_group_desc (sb, i, NULL); - if (!gdp) - continue; - desc_count += le16_to_cpu(gdp->bg_free_inodes_count); - brelse(bitmap_bh); - bitmap_bh = read_inode_bitmap(sb, i); - if (!bitmap_bh) - continue; - - x = ext3_count_free(bitmap_bh, EXT3_INODES_PER_GROUP(sb) / 8); - printk("group %d: stored = %d, counted = %lu\n", - i, le16_to_cpu(gdp->bg_free_inodes_count), x); - bitmap_count += x; - } - brelse(bitmap_bh); - printk("ext3_count_free_inodes: stored = %u, computed = %lu, %lu\n", - le32_to_cpu(es->s_free_inodes_count), desc_count, bitmap_count); - return desc_count; -#else - desc_count = 0; - for (i = 0; i < EXT3_SB(sb)->s_groups_count; i++) { - gdp = ext3_get_group_desc (sb, i, NULL); - if (!gdp) - continue; - desc_count += le16_to_cpu(gdp->bg_free_inodes_count); - cond_resched(); - } - return desc_count; -#endif -} - -/* Called at mount-time, super-block is locked */ -unsigned long ext3_count_dirs (struct super_block * sb) -{ - unsigned long count = 0; - int i; - - for (i = 0; i < EXT3_SB(sb)->s_groups_count; i++) { - struct ext3_group_desc *gdp = ext3_get_group_desc (sb, i, NULL); - if (!gdp) - continue; - count += le16_to_cpu(gdp->bg_used_dirs_count); - } - return count; -} - diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c deleted file mode 100644 index 6c7e546..0000000 --- a/fs/ext3/inode.c +++ /dev/null @@ -1,3574 +0,0 @@ -/* - * linux/fs/ext3/inode.c - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/fs/minix/inode.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * Goal-directed block allocation by Stephen Tweedie - * (sct@redhat.com), 1993, 1998 - * Big-endian to little-endian byte-swapping/bitmaps by - * David S. Miller (davem@caip.rutgers.edu), 1995 - * 64-bit file support on 64-bit platforms by Jakub Jelinek - * (jj@sunsite.ms.mff.cuni.cz) - * - * Assorted race fixes, rewrite of ext3_get_block() by Al Viro, 2000 - */ - -#include <linux/highuid.h> -#include <linux/quotaops.h> -#include <linux/writeback.h> -#include <linux/mpage.h> -#include <linux/namei.h> -#include <linux/uio.h> -#include "ext3.h" -#include "xattr.h" -#include "acl.h" - -static int ext3_writepage_trans_blocks(struct inode *inode); -static int ext3_block_truncate_page(struct inode *inode, loff_t from); - -/* - * Test whether an inode is a fast symlink. - */ -static int ext3_inode_is_fast_symlink(struct inode *inode) -{ - int ea_blocks = EXT3_I(inode)->i_file_acl ? - (inode->i_sb->s_blocksize >> 9) : 0; - - return (S_ISLNK(inode->i_mode) && inode->i_blocks - ea_blocks == 0); -} - -/* - * The ext3 forget function must perform a revoke if we are freeing data - * which has been journaled. Metadata (eg. indirect blocks) must be - * revoked in all cases. - * - * "bh" may be NULL: a metadata block may have been freed from memory - * but there may still be a record of it in the journal, and that record - * still needs to be revoked. - */ -int ext3_forget(handle_t *handle, int is_metadata, struct inode *inode, - struct buffer_head *bh, ext3_fsblk_t blocknr) -{ - int err; - - might_sleep(); - - trace_ext3_forget(inode, is_metadata, blocknr); - BUFFER_TRACE(bh, "enter"); - - jbd_debug(4, "forgetting bh %p: is_metadata = %d, mode %o, " - "data mode %lx\n", - bh, is_metadata, inode->i_mode, - test_opt(inode->i_sb, DATA_FLAGS)); - - /* Never use the revoke function if we are doing full data - * journaling: there is no need to, and a V1 superblock won't - * support it. Otherwise, only skip the revoke on un-journaled - * data blocks. */ - - if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA || - (!is_metadata && !ext3_should_journal_data(inode))) { - if (bh) { - BUFFER_TRACE(bh, "call journal_forget"); - return ext3_journal_forget(handle, bh); - } - return 0; - } - - /* - * data!=journal && (is_metadata || should_journal_data(inode)) - */ - BUFFER_TRACE(bh, "call ext3_journal_revoke"); - err = ext3_journal_revoke(handle, blocknr, bh); - if (err) - ext3_abort(inode->i_sb, __func__, - "error %d when attempting revoke", err); - BUFFER_TRACE(bh, "exit"); - return err; -} - -/* - * Work out how many blocks we need to proceed with the next chunk of a - * truncate transaction. - */ -static unsigned long blocks_for_truncate(struct inode *inode) -{ - unsigned long needed; - - needed = inode->i_blocks >> (inode->i_sb->s_blocksize_bits - 9); - - /* Give ourselves just enough room to cope with inodes in which - * i_blocks is corrupt: we've seen disk corruptions in the past - * which resulted in random data in an inode which looked enough - * like a regular file for ext3 to try to delete it. Things - * will go a bit crazy if that happens, but at least we should - * try not to panic the whole kernel. */ - if (needed < 2) - needed = 2; - - /* But we need to bound the transaction so we don't overflow the - * journal. */ - if (needed > EXT3_MAX_TRANS_DATA) - needed = EXT3_MAX_TRANS_DATA; - - return EXT3_DATA_TRANS_BLOCKS(inode->i_sb) + needed; -} - -/* - * Truncate transactions can be complex and absolutely huge. So we need to - * be able to restart the transaction at a conventient checkpoint to make - * sure we don't overflow the journal. - * - * start_transaction gets us a new handle for a truncate transaction, - * and extend_transaction tries to extend the existing one a bit. If - * extend fails, we need to propagate the failure up and restart the - * transaction in the top-level truncate loop. --sct - */ -static handle_t *start_transaction(struct inode *inode) -{ - handle_t *result; - - result = ext3_journal_start(inode, blocks_for_truncate(inode)); - if (!IS_ERR(result)) - return result; - - ext3_std_error(inode->i_sb, PTR_ERR(result)); - return result; -} - -/* - * Try to extend this transaction for the purposes of truncation. - * - * Returns 0 if we managed to create more room. If we can't create more - * room, and the transaction must be restarted we return 1. - */ -static int try_to_extend_transaction(handle_t *handle, struct inode *inode) -{ - if (handle->h_buffer_credits > EXT3_RESERVE_TRANS_BLOCKS) - return 0; - if (!ext3_journal_extend(handle, blocks_for_truncate(inode))) - return 0; - return 1; -} - -/* - * Restart the transaction associated with *handle. This does a commit, - * so before we call here everything must be consistently dirtied against - * this transaction. - */ -static int truncate_restart_transaction(handle_t *handle, struct inode *inode) -{ - int ret; - - jbd_debug(2, "restarting handle %p\n", handle); - /* - * Drop truncate_mutex to avoid deadlock with ext3_get_blocks_handle - * At this moment, get_block can be called only for blocks inside - * i_size since page cache has been already dropped and writes are - * blocked by i_mutex. So we can safely drop the truncate_mutex. - */ - mutex_unlock(&EXT3_I(inode)->truncate_mutex); - ret = ext3_journal_restart(handle, blocks_for_truncate(inode)); - mutex_lock(&EXT3_I(inode)->truncate_mutex); - return ret; -} - -/* - * Called at inode eviction from icache - */ -void ext3_evict_inode (struct inode *inode) -{ - struct ext3_inode_info *ei = EXT3_I(inode); - struct ext3_block_alloc_info *rsv; - handle_t *handle; - int want_delete = 0; - - trace_ext3_evict_inode(inode); - if (!inode->i_nlink && !is_bad_inode(inode)) { - dquot_initialize(inode); - want_delete = 1; - } - - /* - * When journalling data dirty buffers are tracked only in the journal. - * So although mm thinks everything is clean and ready for reaping the - * inode might still have some pages to write in the running - * transaction or waiting to be checkpointed. Thus calling - * journal_invalidatepage() (via truncate_inode_pages()) to discard - * these buffers can cause data loss. Also even if we did not discard - * these buffers, we would have no way to find them after the inode - * is reaped and thus user could see stale data if he tries to read - * them before the transaction is checkpointed. So be careful and - * force everything to disk here... We use ei->i_datasync_tid to - * store the newest transaction containing inode's data. - * - * Note that directories do not have this problem because they don't - * use page cache. - * - * The s_journal check handles the case when ext3_get_journal() fails - * and puts the journal inode. - */ - if (inode->i_nlink && ext3_should_journal_data(inode) && - EXT3_SB(inode->i_sb)->s_journal && - (S_ISLNK(inode->i_mode) || S_ISREG(inode->i_mode)) && - inode->i_ino != EXT3_JOURNAL_INO) { - tid_t commit_tid = atomic_read(&ei->i_datasync_tid); - journal_t *journal = EXT3_SB(inode->i_sb)->s_journal; - - log_start_commit(journal, commit_tid); - log_wait_commit(journal, commit_tid); - filemap_write_and_wait(&inode->i_data); - } - truncate_inode_pages_final(&inode->i_data); - - ext3_discard_reservation(inode); - rsv = ei->i_block_alloc_info; - ei->i_block_alloc_info = NULL; - if (unlikely(rsv)) - kfree(rsv); - - if (!want_delete) - goto no_delete; - - handle = start_transaction(inode); - if (IS_ERR(handle)) { - /* - * If we're going to skip the normal cleanup, we still need to - * make sure that the in-core orphan linked list is properly - * cleaned up. - */ - ext3_orphan_del(NULL, inode); - goto no_delete; - } - - if (IS_SYNC(inode)) - handle->h_sync = 1; - inode->i_size = 0; - if (inode->i_blocks) - ext3_truncate(inode); - /* - * Kill off the orphan record created when the inode lost the last - * link. Note that ext3_orphan_del() has to be able to cope with the - * deletion of a non-existent orphan - ext3_truncate() could - * have removed the record. - */ - ext3_orphan_del(handle, inode); - ei->i_dtime = get_seconds(); - - /* - * One subtle ordering requirement: if anything has gone wrong - * (transaction abort, IO errors, whatever), then we can still - * do these next steps (the fs will already have been marked as - * having errors), but we can't free the inode if the mark_dirty - * fails. - */ - if (ext3_mark_inode_dirty(handle, inode)) { - /* If that failed, just dquot_drop() and be done with that */ - dquot_drop(inode); - clear_inode(inode); - } else { - ext3_xattr_delete_inode(handle, inode); - dquot_free_inode(inode); - dquot_drop(inode); - clear_inode(inode); - ext3_free_inode(handle, inode); - } - ext3_journal_stop(handle); - return; -no_delete: - clear_inode(inode); - dquot_drop(inode); -} - -typedef struct { - __le32 *p; - __le32 key; - struct buffer_head *bh; -} Indirect; - -static inline void add_chain(Indirect *p, struct buffer_head *bh, __le32 *v) -{ - p->key = *(p->p = v); - p->bh = bh; -} - -static int verify_chain(Indirect *from, Indirect *to) -{ - while (from <= to && from->key == *from->p) - from++; - return (from > to); -} - -/** - * ext3_block_to_path - parse the block number into array of offsets - * @inode: inode in question (we are only interested in its superblock) - * @i_block: block number to be parsed - * @offsets: array to store the offsets in - * @boundary: set this non-zero if the referred-to block is likely to be - * followed (on disk) by an indirect block. - * - * To store the locations of file's data ext3 uses a data structure common - * for UNIX filesystems - tree of pointers anchored in the inode, with - * data blocks at leaves and indirect blocks in intermediate nodes. - * This function translates the block number into path in that tree - - * return value is the path length and @offsets[n] is the offset of - * pointer to (n+1)th node in the nth one. If @block is out of range - * (negative or too large) warning is printed and zero returned. - * - * Note: function doesn't find node addresses, so no IO is needed. All - * we need to know is the capacity of indirect blocks (taken from the - * inode->i_sb). - */ - -/* - * Portability note: the last comparison (check that we fit into triple - * indirect block) is spelled differently, because otherwise on an - * architecture with 32-bit longs and 8Kb pages we might get into trouble - * if our filesystem had 8Kb blocks. We might use long long, but that would - * kill us on x86. Oh, well, at least the sign propagation does not matter - - * i_block would have to be negative in the very beginning, so we would not - * get there at all. - */ - -static int ext3_block_to_path(struct inode *inode, - long i_block, int offsets[4], int *boundary) -{ - int ptrs = EXT3_ADDR_PER_BLOCK(inode->i_sb); - int ptrs_bits = EXT3_ADDR_PER_BLOCK_BITS(inode->i_sb); - const long direct_blocks = EXT3_NDIR_BLOCKS, - indirect_blocks = ptrs, - double_blocks = (1 << (ptrs_bits * 2)); - int n = 0; - int final = 0; - - if (i_block < 0) { - ext3_warning (inode->i_sb, "ext3_block_to_path", "block < 0"); - } else if (i_block < direct_blocks) { - offsets[n++] = i_block; - final = direct_blocks; - } else if ( (i_block -= direct_blocks) < indirect_blocks) { - offsets[n++] = EXT3_IND_BLOCK; - offsets[n++] = i_block; - final = ptrs; - } else if ((i_block -= indirect_blocks) < double_blocks) { - offsets[n++] = EXT3_DIND_BLOCK; - offsets[n++] = i_block >> ptrs_bits; - offsets[n++] = i_block & (ptrs - 1); - final = ptrs; - } else if (((i_block -= double_blocks) >> (ptrs_bits * 2)) < ptrs) { - offsets[n++] = EXT3_TIND_BLOCK; - offsets[n++] = i_block >> (ptrs_bits * 2); - offsets[n++] = (i_block >> ptrs_bits) & (ptrs - 1); - offsets[n++] = i_block & (ptrs - 1); - final = ptrs; - } else { - ext3_warning(inode->i_sb, "ext3_block_to_path", "block > big"); - } - if (boundary) - *boundary = final - 1 - (i_block & (ptrs - 1)); - return n; -} - -/** - * ext3_get_branch - read the chain of indirect blocks leading to data - * @inode: inode in question - * @depth: depth of the chain (1 - direct pointer, etc.) - * @offsets: offsets of pointers in inode/indirect blocks - * @chain: place to store the result - * @err: here we store the error value - * - * Function fills the array of triples <key, p, bh> and returns %NULL - * if everything went OK or the pointer to the last filled triple - * (incomplete one) otherwise. Upon the return chain[i].key contains - * the number of (i+1)-th block in the chain (as it is stored in memory, - * i.e. little-endian 32-bit), chain[i].p contains the address of that - * number (it points into struct inode for i==0 and into the bh->b_data - * for i>0) and chain[i].bh points to the buffer_head of i-th indirect - * block for i>0 and NULL for i==0. In other words, it holds the block - * numbers of the chain, addresses they were taken from (and where we can - * verify that chain did not change) and buffer_heads hosting these - * numbers. - * - * Function stops when it stumbles upon zero pointer (absent block) - * (pointer to last triple returned, *@err == 0) - * or when it gets an IO error reading an indirect block - * (ditto, *@err == -EIO) - * or when it notices that chain had been changed while it was reading - * (ditto, *@err == -EAGAIN) - * or when it reads all @depth-1 indirect blocks successfully and finds - * the whole chain, all way to the data (returns %NULL, *err == 0). - */ -static Indirect *ext3_get_branch(struct inode *inode, int depth, int *offsets, - Indirect chain[4], int *err) -{ - struct super_block *sb = inode->i_sb; - Indirect *p = chain; - struct buffer_head *bh; - - *err = 0; - /* i_data is not going away, no lock needed */ - add_chain (chain, NULL, EXT3_I(inode)->i_data + *offsets); - if (!p->key) - goto no_block; - while (--depth) { - bh = sb_bread(sb, le32_to_cpu(p->key)); - if (!bh) - goto failure; - /* Reader: pointers */ - if (!verify_chain(chain, p)) - goto changed; - add_chain(++p, bh, (__le32*)bh->b_data + *++offsets); - /* Reader: end */ - if (!p->key) - goto no_block; - } - return NULL; - -changed: - brelse(bh); - *err = -EAGAIN; - goto no_block; -failure: - *err = -EIO; -no_block: - return p; -} - -/** - * ext3_find_near - find a place for allocation with sufficient locality - * @inode: owner - * @ind: descriptor of indirect block. - * - * This function returns the preferred place for block allocation. - * It is used when heuristic for sequential allocation fails. - * Rules are: - * + if there is a block to the left of our position - allocate near it. - * + if pointer will live in indirect block - allocate near that block. - * + if pointer will live in inode - allocate in the same - * cylinder group. - * - * In the latter case we colour the starting block by the callers PID to - * prevent it from clashing with concurrent allocations for a different inode - * in the same block group. The PID is used here so that functionally related - * files will be close-by on-disk. - * - * Caller must make sure that @ind is valid and will stay that way. - */ -static ext3_fsblk_t ext3_find_near(struct inode *inode, Indirect *ind) -{ - struct ext3_inode_info *ei = EXT3_I(inode); - __le32 *start = ind->bh ? (__le32*) ind->bh->b_data : ei->i_data; - __le32 *p; - ext3_fsblk_t bg_start; - ext3_grpblk_t colour; - - /* Try to find previous block */ - for (p = ind->p - 1; p >= start; p--) { - if (*p) - return le32_to_cpu(*p); - } - - /* No such thing, so let's try location of indirect block */ - if (ind->bh) - return ind->bh->b_blocknr; - - /* - * It is going to be referred to from the inode itself? OK, just put it - * into the same cylinder group then. - */ - bg_start = ext3_group_first_block_no(inode->i_sb, ei->i_block_group); - colour = (current->pid % 16) * - (EXT3_BLOCKS_PER_GROUP(inode->i_sb) / 16); - return bg_start + colour; -} - -/** - * ext3_find_goal - find a preferred place for allocation. - * @inode: owner - * @block: block we want - * @partial: pointer to the last triple within a chain - * - * Normally this function find the preferred place for block allocation, - * returns it. - */ - -static ext3_fsblk_t ext3_find_goal(struct inode *inode, long block, - Indirect *partial) -{ - struct ext3_block_alloc_info *block_i; - - block_i = EXT3_I(inode)->i_block_alloc_info; - - /* - * try the heuristic for sequential allocation, - * failing that at least try to get decent locality. - */ - if (block_i && (block == block_i->last_alloc_logical_block + 1) - && (block_i->last_alloc_physical_block != 0)) { - return block_i->last_alloc_physical_block + 1; - } - - return ext3_find_near(inode, partial); -} - -/** - * ext3_blks_to_allocate - Look up the block map and count the number - * of direct blocks need to be allocated for the given branch. - * - * @branch: chain of indirect blocks - * @k: number of blocks need for indirect blocks - * @blks: number of data blocks to be mapped. - * @blocks_to_boundary: the offset in the indirect block - * - * return the total number of blocks to be allocate, including the - * direct and indirect blocks. - */ -static int ext3_blks_to_allocate(Indirect *branch, int k, unsigned long blks, - int blocks_to_boundary) -{ - unsigned long count = 0; - - /* - * Simple case, [t,d]Indirect block(s) has not allocated yet - * then it's clear blocks on that path have not allocated - */ - if (k > 0) { - /* right now we don't handle cross boundary allocation */ - if (blks < blocks_to_boundary + 1) - count += blks; - else - count += blocks_to_boundary + 1; - return count; - } - - count++; - while (count < blks && count <= blocks_to_boundary && - le32_to_cpu(*(branch[0].p + count)) == 0) { - count++; - } - return count; -} - -/** - * ext3_alloc_blocks - multiple allocate blocks needed for a branch - * @handle: handle for this transaction - * @inode: owner - * @goal: preferred place for allocation - * @indirect_blks: the number of blocks need to allocate for indirect - * blocks - * @blks: number of blocks need to allocated for direct blocks - * @new_blocks: on return it will store the new block numbers for - * the indirect blocks(if needed) and the first direct block, - * @err: here we store the error value - * - * return the number of direct blocks allocated - */ -static int ext3_alloc_blocks(handle_t *handle, struct inode *inode, - ext3_fsblk_t goal, int indirect_blks, int blks, - ext3_fsblk_t new_blocks[4], int *err) -{ - int target, i; - unsigned long count = 0; - int index = 0; - ext3_fsblk_t current_block = 0; - int ret = 0; - - /* - * Here we try to allocate the requested multiple blocks at once, - * on a best-effort basis. - * To build a branch, we should allocate blocks for - * the indirect blocks(if not allocated yet), and at least - * the first direct block of this branch. That's the - * minimum number of blocks need to allocate(required) - */ - target = blks + indirect_blks; - - while (1) { - count = target; - /* allocating blocks for indirect blocks and direct blocks */ - current_block = ext3_new_blocks(handle,inode,goal,&count,err); - if (*err) - goto failed_out; - - target -= count; - /* allocate blocks for indirect blocks */ - while (index < indirect_blks && count) { - new_blocks[index++] = current_block++; - count--; - } - - if (count > 0) - break; - } - - /* save the new block number for the first direct block */ - new_blocks[index] = current_block; - - /* total number of blocks allocated for direct blocks */ - ret = count; - *err = 0; - return ret; -failed_out: - for (i = 0; i <index; i++) - ext3_free_blocks(handle, inode, new_blocks[i], 1); - return ret; -} - -/** - * ext3_alloc_branch - allocate and set up a chain of blocks. - * @handle: handle for this transaction - * @inode: owner - * @indirect_blks: number of allocated indirect blocks - * @blks: number of allocated direct blocks - * @goal: preferred place for allocation - * @offsets: offsets (in the blocks) to store the pointers to next. - * @branch: place to store the chain in. - * - * This function allocates blocks, zeroes out all but the last one, - * links them into chain and (if we are synchronous) writes them to disk. - * In other words, it prepares a branch that can be spliced onto the - * inode. It stores the information about that chain in the branch[], in - * the same format as ext3_get_branch() would do. We are calling it after - * we had read the existing part of chain and partial points to the last - * triple of that (one with zero ->key). Upon the exit we have the same - * picture as after the successful ext3_get_block(), except that in one - * place chain is disconnected - *branch->p is still zero (we did not - * set the last link), but branch->key contains the number that should - * be placed into *branch->p to fill that gap. - * - * If allocation fails we free all blocks we've allocated (and forget - * their buffer_heads) and return the error value the from failed - * ext3_alloc_block() (normally -ENOSPC). Otherwise we set the chain - * as described above and return 0. - */ -static int ext3_alloc_branch(handle_t *handle, struct inode *inode, - int indirect_blks, int *blks, ext3_fsblk_t goal, - int *offsets, Indirect *branch) -{ - int blocksize = inode->i_sb->s_blocksize; - int i, n = 0; - int err = 0; - struct buffer_head *bh; - int num; - ext3_fsblk_t new_blocks[4]; - ext3_fsblk_t current_block; - - num = ext3_alloc_blocks(handle, inode, goal, indirect_blks, - *blks, new_blocks, &err); - if (err) - return err; - - branch[0].key = cpu_to_le32(new_blocks[0]); - /* - * metadata blocks and data blocks are allocated. - */ - for (n = 1; n <= indirect_blks; n++) { - /* - * Get buffer_head for parent block, zero it out - * and set the pointer to new one, then send - * parent to disk. - */ - bh = sb_getblk(inode->i_sb, new_blocks[n-1]); - if (unlikely(!bh)) { - err = -ENOMEM; - goto failed; - } - branch[n].bh = bh; - lock_buffer(bh); - BUFFER_TRACE(bh, "call get_create_access"); - err = ext3_journal_get_create_access(handle, bh); - if (err) { - unlock_buffer(bh); - brelse(bh); - goto failed; - } - - memset(bh->b_data, 0, blocksize); - branch[n].p = (__le32 *) bh->b_data + offsets[n]; - branch[n].key = cpu_to_le32(new_blocks[n]); - *branch[n].p = branch[n].key; - if ( n == indirect_blks) { - current_block = new_blocks[n]; - /* - * End of chain, update the last new metablock of - * the chain to point to the new allocated - * data blocks numbers - */ - for (i=1; i < num; i++) - *(branch[n].p + i) = cpu_to_le32(++current_block); - } - BUFFER_TRACE(bh, "marking uptodate"); - set_buffer_uptodate(bh); - unlock_buffer(bh); - - BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, bh); - if (err) - goto failed; - } - *blks = num; - return err; -failed: - /* Allocation failed, free what we already allocated */ - for (i = 1; i <= n ; i++) { - BUFFER_TRACE(branch[i].bh, "call journal_forget"); - ext3_journal_forget(handle, branch[i].bh); - } - for (i = 0; i < indirect_blks; i++) - ext3_free_blocks(handle, inode, new_blocks[i], 1); - - ext3_free_blocks(handle, inode, new_blocks[i], num); - - return err; -} - -/** - * ext3_splice_branch - splice the allocated branch onto inode. - * @handle: handle for this transaction - * @inode: owner - * @block: (logical) number of block we are adding - * @where: location of missing link - * @num: number of indirect blocks we are adding - * @blks: number of direct blocks we are adding - * - * This function fills the missing link and does all housekeeping needed in - * inode (->i_blocks, etc.). In case of success we end up with the full - * chain to new block and return 0. - */ -static int ext3_splice_branch(handle_t *handle, struct inode *inode, - long block, Indirect *where, int num, int blks) -{ - int i; - int err = 0; - struct ext3_block_alloc_info *block_i; - ext3_fsblk_t current_block; - struct ext3_inode_info *ei = EXT3_I(inode); - struct timespec now; - - block_i = ei->i_block_alloc_info; - /* - * If we're splicing into a [td]indirect block (as opposed to the - * inode) then we need to get write access to the [td]indirect block - * before the splice. - */ - if (where->bh) { - BUFFER_TRACE(where->bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, where->bh); - if (err) - goto err_out; - } - /* That's it */ - - *where->p = where->key; - - /* - * Update the host buffer_head or inode to point to more just allocated - * direct blocks blocks - */ - if (num == 0 && blks > 1) { - current_block = le32_to_cpu(where->key) + 1; - for (i = 1; i < blks; i++) - *(where->p + i ) = cpu_to_le32(current_block++); - } - - /* - * update the most recently allocated logical & physical block - * in i_block_alloc_info, to assist find the proper goal block for next - * allocation - */ - if (block_i) { - block_i->last_alloc_logical_block = block + blks - 1; - block_i->last_alloc_physical_block = - le32_to_cpu(where[num].key) + blks - 1; - } - - /* We are done with atomic stuff, now do the rest of housekeeping */ - now = CURRENT_TIME_SEC; - if (!timespec_equal(&inode->i_ctime, &now) || !where->bh) { - inode->i_ctime = now; - ext3_mark_inode_dirty(handle, inode); - } - /* ext3_mark_inode_dirty already updated i_sync_tid */ - atomic_set(&ei->i_datasync_tid, handle->h_transaction->t_tid); - - /* had we spliced it onto indirect block? */ - if (where->bh) { - /* - * If we spliced it onto an indirect block, we haven't - * altered the inode. Note however that if it is being spliced - * onto an indirect block at the very end of the file (the - * file is growing) then we *will* alter the inode to reflect - * the new i_size. But that is not done here - it is done in - * generic_commit_write->__mark_inode_dirty->ext3_dirty_inode. - */ - jbd_debug(5, "splicing indirect only\n"); - BUFFER_TRACE(where->bh, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, where->bh); - if (err) - goto err_out; - } else { - /* - * OK, we spliced it into the inode itself on a direct block. - * Inode was dirtied above. - */ - jbd_debug(5, "splicing direct\n"); - } - return err; - -err_out: - for (i = 1; i <= num; i++) { - BUFFER_TRACE(where[i].bh, "call journal_forget"); - ext3_journal_forget(handle, where[i].bh); - ext3_free_blocks(handle,inode,le32_to_cpu(where[i-1].key),1); - } - ext3_free_blocks(handle, inode, le32_to_cpu(where[num].key), blks); - - return err; -} - -/* - * Allocation strategy is simple: if we have to allocate something, we will - * have to go the whole way to leaf. So let's do it before attaching anything - * to tree, set linkage between the newborn blocks, write them if sync is - * required, recheck the path, free and repeat if check fails, otherwise - * set the last missing link (that will protect us from any truncate-generated - * removals - all blocks on the path are immune now) and possibly force the - * write on the parent block. - * That has a nice additional property: no special recovery from the failed - * allocations is needed - we simply release blocks and do not touch anything - * reachable from inode. - * - * `handle' can be NULL if create == 0. - * - * The BKL may not be held on entry here. Be sure to take it early. - * return > 0, # of blocks mapped or allocated. - * return = 0, if plain lookup failed. - * return < 0, error case. - */ -int ext3_get_blocks_handle(handle_t *handle, struct inode *inode, - sector_t iblock, unsigned long maxblocks, - struct buffer_head *bh_result, - int create) -{ - int err = -EIO; - int offsets[4]; - Indirect chain[4]; - Indirect *partial; - ext3_fsblk_t goal; - int indirect_blks; - int blocks_to_boundary = 0; - int depth; - struct ext3_inode_info *ei = EXT3_I(inode); - int count = 0; - ext3_fsblk_t first_block = 0; - - - trace_ext3_get_blocks_enter(inode, iblock, maxblocks, create); - J_ASSERT(handle != NULL || create == 0); - depth = ext3_block_to_path(inode,iblock,offsets,&blocks_to_boundary); - - if (depth == 0) - goto out; - - partial = ext3_get_branch(inode, depth, offsets, chain, &err); - - /* Simplest case - block found, no allocation needed */ - if (!partial) { - first_block = le32_to_cpu(chain[depth - 1].key); - clear_buffer_new(bh_result); - count++; - /*map more blocks*/ - while (count < maxblocks && count <= blocks_to_boundary) { - ext3_fsblk_t blk; - - if (!verify_chain(chain, chain + depth - 1)) { - /* - * Indirect block might be removed by - * truncate while we were reading it. - * Handling of that case: forget what we've - * got now. Flag the err as EAGAIN, so it - * will reread. - */ - err = -EAGAIN; - count = 0; - break; - } - blk = le32_to_cpu(*(chain[depth-1].p + count)); - - if (blk == first_block + count) - count++; - else - break; - } - if (err != -EAGAIN) - goto got_it; - } - - /* Next simple case - plain lookup or failed read of indirect block */ - if (!create || err == -EIO) - goto cleanup; - - /* - * Block out ext3_truncate while we alter the tree - */ - mutex_lock(&ei->truncate_mutex); - - /* - * If the indirect block is missing while we are reading - * the chain(ext3_get_branch() returns -EAGAIN err), or - * if the chain has been changed after we grab the semaphore, - * (either because another process truncated this branch, or - * another get_block allocated this branch) re-grab the chain to see if - * the request block has been allocated or not. - * - * Since we already block the truncate/other get_block - * at this point, we will have the current copy of the chain when we - * splice the branch into the tree. - */ - if (err == -EAGAIN || !verify_chain(chain, partial)) { - while (partial > chain) { - brelse(partial->bh); - partial--; - } - partial = ext3_get_branch(inode, depth, offsets, chain, &err); - if (!partial) { - count++; - mutex_unlock(&ei->truncate_mutex); - if (err) - goto cleanup; - clear_buffer_new(bh_result); - goto got_it; - } - } - - /* - * Okay, we need to do block allocation. Lazily initialize the block - * allocation info here if necessary - */ - if (S_ISREG(inode->i_mode) && (!ei->i_block_alloc_info)) - ext3_init_block_alloc_info(inode); - - goal = ext3_find_goal(inode, iblock, partial); - - /* the number of blocks need to allocate for [d,t]indirect blocks */ - indirect_blks = (chain + depth) - partial - 1; - - /* - * Next look up the indirect map to count the totoal number of - * direct blocks to allocate for this branch. - */ - count = ext3_blks_to_allocate(partial, indirect_blks, - maxblocks, blocks_to_boundary); - err = ext3_alloc_branch(handle, inode, indirect_blks, &count, goal, - offsets + (partial - chain), partial); - - /* - * The ext3_splice_branch call will free and forget any buffers - * on the new chain if there is a failure, but that risks using - * up transaction credits, especially for bitmaps where the - * credits cannot be returned. Can we handle this somehow? We - * may need to return -EAGAIN upwards in the worst case. --sct - */ - if (!err) - err = ext3_splice_branch(handle, inode, iblock, - partial, indirect_blks, count); - mutex_unlock(&ei->truncate_mutex); - if (err) - goto cleanup; - - set_buffer_new(bh_result); -got_it: - map_bh(bh_result, inode->i_sb, le32_to_cpu(chain[depth-1].key)); - if (count > blocks_to_boundary) - set_buffer_boundary(bh_result); - err = count; - /* Clean up and exit */ - partial = chain + depth - 1; /* the whole chain */ -cleanup: - while (partial > chain) { - BUFFER_TRACE(partial->bh, "call brelse"); - brelse(partial->bh); - partial--; - } - BUFFER_TRACE(bh_result, "returned"); -out: - trace_ext3_get_blocks_exit(inode, iblock, - depth ? le32_to_cpu(chain[depth-1].key) : 0, - count, err); - return err; -} - -/* Maximum number of blocks we map for direct IO at once. */ -#define DIO_MAX_BLOCKS 4096 -/* - * Number of credits we need for writing DIO_MAX_BLOCKS: - * We need sb + group descriptor + bitmap + inode -> 4 - * For B blocks with A block pointers per block we need: - * 1 (triple ind.) + (B/A/A + 2) (doubly ind.) + (B/A + 2) (indirect). - * If we plug in 4096 for B and 256 for A (for 1KB block size), we get 25. - */ -#define DIO_CREDITS 25 - -static int ext3_get_block(struct inode *inode, sector_t iblock, - struct buffer_head *bh_result, int create) -{ - handle_t *handle = ext3_journal_current_handle(); - int ret = 0, started = 0; - unsigned max_blocks = bh_result->b_size >> inode->i_blkbits; - - if (create && !handle) { /* Direct IO write... */ - if (max_blocks > DIO_MAX_BLOCKS) - max_blocks = DIO_MAX_BLOCKS; - handle = ext3_journal_start(inode, DIO_CREDITS + - EXT3_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb)); - if (IS_ERR(handle)) { - ret = PTR_ERR(handle); - goto out; - } - started = 1; - } - - ret = ext3_get_blocks_handle(handle, inode, iblock, - max_blocks, bh_result, create); - if (ret > 0) { - bh_result->b_size = (ret << inode->i_blkbits); - ret = 0; - } - if (started) - ext3_journal_stop(handle); -out: - return ret; -} - -int ext3_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, - u64 start, u64 len) -{ - return generic_block_fiemap(inode, fieinfo, start, len, - ext3_get_block); -} - -/* - * `handle' can be NULL if create is zero - */ -struct buffer_head *ext3_getblk(handle_t *handle, struct inode *inode, - long block, int create, int *errp) -{ - struct buffer_head dummy; - int fatal = 0, err; - - J_ASSERT(handle != NULL || create == 0); - - dummy.b_state = 0; - dummy.b_blocknr = -1000; - buffer_trace_init(&dummy.b_history); - err = ext3_get_blocks_handle(handle, inode, block, 1, - &dummy, create); - /* - * ext3_get_blocks_handle() returns number of blocks - * mapped. 0 in case of a HOLE. - */ - if (err > 0) { - WARN_ON(err > 1); - err = 0; - } - *errp = err; - if (!err && buffer_mapped(&dummy)) { - struct buffer_head *bh; - bh = sb_getblk(inode->i_sb, dummy.b_blocknr); - if (unlikely(!bh)) { - *errp = -ENOMEM; - goto err; - } - if (buffer_new(&dummy)) { - J_ASSERT(create != 0); - J_ASSERT(handle != NULL); - - /* - * Now that we do not always journal data, we should - * keep in mind whether this should always journal the - * new buffer as metadata. For now, regular file - * writes use ext3_get_block instead, so it's not a - * problem. - */ - lock_buffer(bh); - BUFFER_TRACE(bh, "call get_create_access"); - fatal = ext3_journal_get_create_access(handle, bh); - if (!fatal && !buffer_uptodate(bh)) { - memset(bh->b_data,0,inode->i_sb->s_blocksize); - set_buffer_uptodate(bh); - } - unlock_buffer(bh); - BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, bh); - if (!fatal) - fatal = err; - } else { - BUFFER_TRACE(bh, "not a new buffer"); - } - if (fatal) { - *errp = fatal; - brelse(bh); - bh = NULL; - } - return bh; - } -err: - return NULL; -} - -struct buffer_head *ext3_bread(handle_t *handle, struct inode *inode, - int block, int create, int *err) -{ - struct buffer_head * bh; - - bh = ext3_getblk(handle, inode, block, create, err); - if (!bh) - return bh; - if (bh_uptodate_or_lock(bh)) - return bh; - get_bh(bh); - bh->b_end_io = end_buffer_read_sync; - submit_bh(READ | REQ_META | REQ_PRIO, bh); - wait_on_buffer(bh); - if (buffer_uptodate(bh)) - return bh; - put_bh(bh); - *err = -EIO; - return NULL; -} - -static int walk_page_buffers( handle_t *handle, - struct buffer_head *head, - unsigned from, - unsigned to, - int *partial, - int (*fn)( handle_t *handle, - struct buffer_head *bh)) -{ - struct buffer_head *bh; - unsigned block_start, block_end; - unsigned blocksize = head->b_size; - int err, ret = 0; - struct buffer_head *next; - - for ( bh = head, block_start = 0; - ret == 0 && (bh != head || !block_start); - block_start = block_end, bh = next) - { - next = bh->b_this_page; - block_end = block_start + blocksize; - if (block_end <= from || block_start >= to) { - if (partial && !buffer_uptodate(bh)) - *partial = 1; - continue; - } - err = (*fn)(handle, bh); - if (!ret) - ret = err; - } - return ret; -} - -/* - * To preserve ordering, it is essential that the hole instantiation and - * the data write be encapsulated in a single transaction. We cannot - * close off a transaction and start a new one between the ext3_get_block() - * and the commit_write(). So doing the journal_start at the start of - * prepare_write() is the right place. - * - * Also, this function can nest inside ext3_writepage() -> - * block_write_full_page(). In that case, we *know* that ext3_writepage() - * has generated enough buffer credits to do the whole page. So we won't - * block on the journal in that case, which is good, because the caller may - * be PF_MEMALLOC. - * - * By accident, ext3 can be reentered when a transaction is open via - * quota file writes. If we were to commit the transaction while thus - * reentered, there can be a deadlock - we would be holding a quota - * lock, and the commit would never complete if another thread had a - * transaction open and was blocking on the quota lock - a ranking - * violation. - * - * So what we do is to rely on the fact that journal_stop/journal_start - * will _not_ run commit under these circumstances because handle->h_ref - * is elevated. We'll still have enough credits for the tiny quotafile - * write. - */ -static int do_journal_get_write_access(handle_t *handle, - struct buffer_head *bh) -{ - int dirty = buffer_dirty(bh); - int ret; - - if (!buffer_mapped(bh) || buffer_freed(bh)) - return 0; - /* - * __block_prepare_write() could have dirtied some buffers. Clean - * the dirty bit as jbd2_journal_get_write_access() could complain - * otherwise about fs integrity issues. Setting of the dirty bit - * by __block_prepare_write() isn't a real problem here as we clear - * the bit before releasing a page lock and thus writeback cannot - * ever write the buffer. - */ - if (dirty) - clear_buffer_dirty(bh); - ret = ext3_journal_get_write_access(handle, bh); - if (!ret && dirty) - ret = ext3_journal_dirty_metadata(handle, bh); - return ret; -} - -/* - * Truncate blocks that were not used by write. We have to truncate the - * pagecache as well so that corresponding buffers get properly unmapped. - */ -static void ext3_truncate_failed_write(struct inode *inode) -{ - truncate_inode_pages(inode->i_mapping, inode->i_size); - ext3_truncate(inode); -} - -/* - * Truncate blocks that were not used by direct IO write. We have to zero out - * the last file block as well because direct IO might have written to it. - */ -static void ext3_truncate_failed_direct_write(struct inode *inode) -{ - ext3_block_truncate_page(inode, inode->i_size); - ext3_truncate(inode); -} - -static int ext3_write_begin(struct file *file, struct address_space *mapping, - loff_t pos, unsigned len, unsigned flags, - struct page **pagep, void **fsdata) -{ - struct inode *inode = mapping->host; - int ret; - handle_t *handle; - int retries = 0; - struct page *page; - pgoff_t index; - unsigned from, to; - /* Reserve one block more for addition to orphan list in case - * we allocate blocks but write fails for some reason */ - int needed_blocks = ext3_writepage_trans_blocks(inode) + 1; - - trace_ext3_write_begin(inode, pos, len, flags); - - index = pos >> PAGE_CACHE_SHIFT; - from = pos & (PAGE_CACHE_SIZE - 1); - to = from + len; - -retry: - page = grab_cache_page_write_begin(mapping, index, flags); - if (!page) - return -ENOMEM; - *pagep = page; - - handle = ext3_journal_start(inode, needed_blocks); - if (IS_ERR(handle)) { - unlock_page(page); - page_cache_release(page); - ret = PTR_ERR(handle); - goto out; - } - ret = __block_write_begin(page, pos, len, ext3_get_block); - if (ret) - goto write_begin_failed; - - if (ext3_should_journal_data(inode)) { - ret = walk_page_buffers(handle, page_buffers(page), - from, to, NULL, do_journal_get_write_access); - } -write_begin_failed: - if (ret) { - /* - * block_write_begin may have instantiated a few blocks - * outside i_size. Trim these off again. Don't need - * i_size_read because we hold i_mutex. - * - * Add inode to orphan list in case we crash before truncate - * finishes. Do this only if ext3_can_truncate() agrees so - * that orphan processing code is happy. - */ - if (pos + len > inode->i_size && ext3_can_truncate(inode)) - ext3_orphan_add(handle, inode); - ext3_journal_stop(handle); - unlock_page(page); - page_cache_release(page); - if (pos + len > inode->i_size) - ext3_truncate_failed_write(inode); - } - if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries)) - goto retry; -out: - return ret; -} - - -int ext3_journal_dirty_data(handle_t *handle, struct buffer_head *bh) -{ - int err = journal_dirty_data(handle, bh); - if (err) - ext3_journal_abort_handle(__func__, __func__, - bh, handle, err); - return err; -} - -/* For ordered writepage and write_end functions */ -static int journal_dirty_data_fn(handle_t *handle, struct buffer_head *bh) -{ - /* - * Write could have mapped the buffer but it didn't copy the data in - * yet. So avoid filing such buffer into a transaction. - */ - if (buffer_mapped(bh) && buffer_uptodate(bh)) - return ext3_journal_dirty_data(handle, bh); - return 0; -} - -/* For write_end() in data=journal mode */ -static int write_end_fn(handle_t *handle, struct buffer_head *bh) -{ - if (!buffer_mapped(bh) || buffer_freed(bh)) - return 0; - set_buffer_uptodate(bh); - return ext3_journal_dirty_metadata(handle, bh); -} - -/* - * This is nasty and subtle: ext3_write_begin() could have allocated blocks - * for the whole page but later we failed to copy the data in. Update inode - * size according to what we managed to copy. The rest is going to be - * truncated in write_end function. - */ -static void update_file_sizes(struct inode *inode, loff_t pos, unsigned copied) -{ - /* What matters to us is i_disksize. We don't write i_size anywhere */ - if (pos + copied > inode->i_size) - i_size_write(inode, pos + copied); - if (pos + copied > EXT3_I(inode)->i_disksize) { - EXT3_I(inode)->i_disksize = pos + copied; - mark_inode_dirty(inode); - } -} - -/* - * We need to pick up the new inode size which generic_commit_write gave us - * `file' can be NULL - eg, when called from page_symlink(). - * - * ext3 never places buffers on inode->i_mapping->private_list. metadata - * buffers are managed internally. - */ -static int ext3_ordered_write_end(struct file *file, - struct address_space *mapping, - loff_t pos, unsigned len, unsigned copied, - struct page *page, void *fsdata) -{ - handle_t *handle = ext3_journal_current_handle(); - struct inode *inode = file->f_mapping->host; - unsigned from, to; - int ret = 0, ret2; - - trace_ext3_ordered_write_end(inode, pos, len, copied); - copied = block_write_end(file, mapping, pos, len, copied, page, fsdata); - - from = pos & (PAGE_CACHE_SIZE - 1); - to = from + copied; - ret = walk_page_buffers(handle, page_buffers(page), - from, to, NULL, journal_dirty_data_fn); - - if (ret == 0) - update_file_sizes(inode, pos, copied); - /* - * There may be allocated blocks outside of i_size because - * we failed to copy some data. Prepare for truncate. - */ - if (pos + len > inode->i_size && ext3_can_truncate(inode)) - ext3_orphan_add(handle, inode); - ret2 = ext3_journal_stop(handle); - if (!ret) - ret = ret2; - unlock_page(page); - page_cache_release(page); - - if (pos + len > inode->i_size) - ext3_truncate_failed_write(inode); - return ret ? ret : copied; -} - -static int ext3_writeback_write_end(struct file *file, - struct address_space *mapping, - loff_t pos, unsigned len, unsigned copied, - struct page *page, void *fsdata) -{ - handle_t *handle = ext3_journal_current_handle(); - struct inode *inode = file->f_mapping->host; - int ret; - - trace_ext3_writeback_write_end(inode, pos, len, copied); - copied = block_write_end(file, mapping, pos, len, copied, page, fsdata); - update_file_sizes(inode, pos, copied); - /* - * There may be allocated blocks outside of i_size because - * we failed to copy some data. Prepare for truncate. - */ - if (pos + len > inode->i_size && ext3_can_truncate(inode)) - ext3_orphan_add(handle, inode); - ret = ext3_journal_stop(handle); - unlock_page(page); - page_cache_release(page); - - if (pos + len > inode->i_size) - ext3_truncate_failed_write(inode); - return ret ? ret : copied; -} - -static int ext3_journalled_write_end(struct file *file, - struct address_space *mapping, - loff_t pos, unsigned len, unsigned copied, - struct page *page, void *fsdata) -{ - handle_t *handle = ext3_journal_current_handle(); - struct inode *inode = mapping->host; - struct ext3_inode_info *ei = EXT3_I(inode); - int ret = 0, ret2; - int partial = 0; - unsigned from, to; - - trace_ext3_journalled_write_end(inode, pos, len, copied); - from = pos & (PAGE_CACHE_SIZE - 1); - to = from + len; - - if (copied < len) { - if (!PageUptodate(page)) - copied = 0; - page_zero_new_buffers(page, from + copied, to); - to = from + copied; - } - - ret = walk_page_buffers(handle, page_buffers(page), from, - to, &partial, write_end_fn); - if (!partial) - SetPageUptodate(page); - - if (pos + copied > inode->i_size) - i_size_write(inode, pos + copied); - /* - * There may be allocated blocks outside of i_size because - * we failed to copy some data. Prepare for truncate. - */ - if (pos + len > inode->i_size && ext3_can_truncate(inode)) - ext3_orphan_add(handle, inode); - ext3_set_inode_state(inode, EXT3_STATE_JDATA); - atomic_set(&ei->i_datasync_tid, handle->h_transaction->t_tid); - if (inode->i_size > ei->i_disksize) { - ei->i_disksize = inode->i_size; - ret2 = ext3_mark_inode_dirty(handle, inode); - if (!ret) - ret = ret2; - } - - ret2 = ext3_journal_stop(handle); - if (!ret) - ret = ret2; - unlock_page(page); - page_cache_release(page); - - if (pos + len > inode->i_size) - ext3_truncate_failed_write(inode); - return ret ? ret : copied; -} - -/* - * bmap() is special. It gets used by applications such as lilo and by - * the swapper to find the on-disk block of a specific piece of data. - * - * Naturally, this is dangerous if the block concerned is still in the - * journal. If somebody makes a swapfile on an ext3 data-journaling - * filesystem and enables swap, then they may get a nasty shock when the - * data getting swapped to that swapfile suddenly gets overwritten by - * the original zero's written out previously to the journal and - * awaiting writeback in the kernel's buffer cache. - * - * So, if we see any bmap calls here on a modified, data-journaled file, - * take extra steps to flush any blocks which might be in the cache. - */ -static sector_t ext3_bmap(struct address_space *mapping, sector_t block) -{ - struct inode *inode = mapping->host; - journal_t *journal; - int err; - - if (ext3_test_inode_state(inode, EXT3_STATE_JDATA)) { - /* - * This is a REALLY heavyweight approach, but the use of - * bmap on dirty files is expected to be extremely rare: - * only if we run lilo or swapon on a freshly made file - * do we expect this to happen. - * - * (bmap requires CAP_SYS_RAWIO so this does not - * represent an unprivileged user DOS attack --- we'd be - * in trouble if mortal users could trigger this path at - * will.) - * - * NB. EXT3_STATE_JDATA is not set on files other than - * regular files. If somebody wants to bmap a directory - * or symlink and gets confused because the buffer - * hasn't yet been flushed to disk, they deserve - * everything they get. - */ - - ext3_clear_inode_state(inode, EXT3_STATE_JDATA); - journal = EXT3_JOURNAL(inode); - journal_lock_updates(journal); - err = journal_flush(journal); - journal_unlock_updates(journal); - - if (err) - return 0; - } - - return generic_block_bmap(mapping,block,ext3_get_block); -} - -static int bget_one(handle_t *handle, struct buffer_head *bh) -{ - get_bh(bh); - return 0; -} - -static int bput_one(handle_t *handle, struct buffer_head *bh) -{ - put_bh(bh); - return 0; -} - -static int buffer_unmapped(handle_t *handle, struct buffer_head *bh) -{ - return !buffer_mapped(bh); -} - -/* - * Note that whenever we need to map blocks we start a transaction even if - * we're not journalling data. This is to preserve ordering: any hole - * instantiation within __block_write_full_page -> ext3_get_block() should be - * journalled along with the data so we don't crash and then get metadata which - * refers to old data. - * - * In all journalling modes block_write_full_page() will start the I/O. - * - * We don't honour synchronous mounts for writepage(). That would be - * disastrous. Any write() or metadata operation will sync the fs for - * us. - */ -static int ext3_ordered_writepage(struct page *page, - struct writeback_control *wbc) -{ - struct inode *inode = page->mapping->host; - struct buffer_head *page_bufs; - handle_t *handle = NULL; - int ret = 0; - int err; - - J_ASSERT(PageLocked(page)); - /* - * We don't want to warn for emergency remount. The condition is - * ordered to avoid dereferencing inode->i_sb in non-error case to - * avoid slow-downs. - */ - WARN_ON_ONCE(IS_RDONLY(inode) && - !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ERROR_FS)); - - /* - * We give up here if we're reentered, because it might be for a - * different filesystem. - */ - if (ext3_journal_current_handle()) - goto out_fail; - - trace_ext3_ordered_writepage(page); - if (!page_has_buffers(page)) { - create_empty_buffers(page, inode->i_sb->s_blocksize, - (1 << BH_Dirty)|(1 << BH_Uptodate)); - page_bufs = page_buffers(page); - } else { - page_bufs = page_buffers(page); - if (!walk_page_buffers(NULL, page_bufs, 0, PAGE_CACHE_SIZE, - NULL, buffer_unmapped)) { - /* Provide NULL get_block() to catch bugs if buffers - * weren't really mapped */ - return block_write_full_page(page, NULL, wbc); - } - } - handle = ext3_journal_start(inode, ext3_writepage_trans_blocks(inode)); - - if (IS_ERR(handle)) { - ret = PTR_ERR(handle); - goto out_fail; - } - - walk_page_buffers(handle, page_bufs, 0, - PAGE_CACHE_SIZE, NULL, bget_one); - - ret = block_write_full_page(page, ext3_get_block, wbc); - - /* - * The page can become unlocked at any point now, and - * truncate can then come in and change things. So we - * can't touch *page from now on. But *page_bufs is - * safe due to elevated refcount. - */ - - /* - * And attach them to the current transaction. But only if - * block_write_full_page() succeeded. Otherwise they are unmapped, - * and generally junk. - */ - if (ret == 0) - ret = walk_page_buffers(handle, page_bufs, 0, PAGE_CACHE_SIZE, - NULL, journal_dirty_data_fn); - walk_page_buffers(handle, page_bufs, 0, - PAGE_CACHE_SIZE, NULL, bput_one); - err = ext3_journal_stop(handle); - if (!ret) - ret = err; - return ret; - -out_fail: - redirty_page_for_writepage(wbc, page); - unlock_page(page); - return ret; -} - -static int ext3_writeback_writepage(struct page *page, - struct writeback_control *wbc) -{ - struct inode *inode = page->mapping->host; - handle_t *handle = NULL; - int ret = 0; - int err; - - J_ASSERT(PageLocked(page)); - /* - * We don't want to warn for emergency remount. The condition is - * ordered to avoid dereferencing inode->i_sb in non-error case to - * avoid slow-downs. - */ - WARN_ON_ONCE(IS_RDONLY(inode) && - !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ERROR_FS)); - - if (ext3_journal_current_handle()) - goto out_fail; - - trace_ext3_writeback_writepage(page); - if (page_has_buffers(page)) { - if (!walk_page_buffers(NULL, page_buffers(page), 0, - PAGE_CACHE_SIZE, NULL, buffer_unmapped)) { - /* Provide NULL get_block() to catch bugs if buffers - * weren't really mapped */ - return block_write_full_page(page, NULL, wbc); - } - } - - handle = ext3_journal_start(inode, ext3_writepage_trans_blocks(inode)); - if (IS_ERR(handle)) { - ret = PTR_ERR(handle); - goto out_fail; - } - - ret = block_write_full_page(page, ext3_get_block, wbc); - - err = ext3_journal_stop(handle); - if (!ret) - ret = err; - return ret; - -out_fail: - redirty_page_for_writepage(wbc, page); - unlock_page(page); - return ret; -} - -static int ext3_journalled_writepage(struct page *page, - struct writeback_control *wbc) -{ - struct inode *inode = page->mapping->host; - handle_t *handle = NULL; - int ret = 0; - int err; - - J_ASSERT(PageLocked(page)); - /* - * We don't want to warn for emergency remount. The condition is - * ordered to avoid dereferencing inode->i_sb in non-error case to - * avoid slow-downs. - */ - WARN_ON_ONCE(IS_RDONLY(inode) && - !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ERROR_FS)); - - trace_ext3_journalled_writepage(page); - if (!page_has_buffers(page) || PageChecked(page)) { - if (ext3_journal_current_handle()) - goto no_write; - - handle = ext3_journal_start(inode, - ext3_writepage_trans_blocks(inode)); - if (IS_ERR(handle)) { - ret = PTR_ERR(handle); - goto no_write; - } - /* - * It's mmapped pagecache. Add buffers and journal it. There - * doesn't seem much point in redirtying the page here. - */ - ClearPageChecked(page); - ret = __block_write_begin(page, 0, PAGE_CACHE_SIZE, - ext3_get_block); - if (ret != 0) { - ext3_journal_stop(handle); - goto out_unlock; - } - ret = walk_page_buffers(handle, page_buffers(page), 0, - PAGE_CACHE_SIZE, NULL, do_journal_get_write_access); - - err = walk_page_buffers(handle, page_buffers(page), 0, - PAGE_CACHE_SIZE, NULL, write_end_fn); - if (ret == 0) - ret = err; - ext3_set_inode_state(inode, EXT3_STATE_JDATA); - atomic_set(&EXT3_I(inode)->i_datasync_tid, - handle->h_transaction->t_tid); - unlock_page(page); - err = ext3_journal_stop(handle); - if (!ret) - ret = err; - } else { - /* - * It is a page full of checkpoint-mode buffers. Go and write - * them. They should have been already mapped when they went - * to the journal so provide NULL get_block function to catch - * errors. - */ - ret = block_write_full_page(page, NULL, wbc); - } -out: - return ret; - -no_write: - redirty_page_for_writepage(wbc, page); -out_unlock: - unlock_page(page); - goto out; -} - -static int ext3_readpage(struct file *file, struct page *page) -{ - trace_ext3_readpage(page); - return mpage_readpage(page, ext3_get_block); -} - -static int -ext3_readpages(struct file *file, struct address_space *mapping, - struct list_head *pages, unsigned nr_pages) -{ - return mpage_readpages(mapping, pages, nr_pages, ext3_get_block); -} - -static void ext3_invalidatepage(struct page *page, unsigned int offset, - unsigned int length) -{ - journal_t *journal = EXT3_JOURNAL(page->mapping->host); - - trace_ext3_invalidatepage(page, offset, length); - - /* - * If it's a full truncate we just forget about the pending dirtying - */ - if (offset == 0 && length == PAGE_CACHE_SIZE) - ClearPageChecked(page); - - journal_invalidatepage(journal, page, offset, length); -} - -static int ext3_releasepage(struct page *page, gfp_t wait) -{ - journal_t *journal = EXT3_JOURNAL(page->mapping->host); - - trace_ext3_releasepage(page); - WARN_ON(PageChecked(page)); - if (!page_has_buffers(page)) - return 0; - return journal_try_to_free_buffers(journal, page, wait); -} - -/* - * If the O_DIRECT write will extend the file then add this inode to the - * orphan list. So recovery will truncate it back to the original size - * if the machine crashes during the write. - * - * If the O_DIRECT write is intantiating holes inside i_size and the machine - * crashes then stale disk data _may_ be exposed inside the file. But current - * VFS code falls back into buffered path in that case so we are safe. - */ -static ssize_t ext3_direct_IO(struct kiocb *iocb, struct iov_iter *iter, - loff_t offset) -{ - struct file *file = iocb->ki_filp; - struct inode *inode = file->f_mapping->host; - struct ext3_inode_info *ei = EXT3_I(inode); - handle_t *handle; - ssize_t ret; - int orphan = 0; - size_t count = iov_iter_count(iter); - int retries = 0; - - trace_ext3_direct_IO_enter(inode, offset, count, iov_iter_rw(iter)); - - if (iov_iter_rw(iter) == WRITE) { - loff_t final_size = offset + count; - - if (final_size > inode->i_size) { - /* Credits for sb + inode write */ - handle = ext3_journal_start(inode, 2); - if (IS_ERR(handle)) { - ret = PTR_ERR(handle); - goto out; - } - ret = ext3_orphan_add(handle, inode); - if (ret) { - ext3_journal_stop(handle); - goto out; - } - orphan = 1; - ei->i_disksize = inode->i_size; - ext3_journal_stop(handle); - } - } - -retry: - ret = blockdev_direct_IO(iocb, inode, iter, offset, ext3_get_block); - /* - * In case of error extending write may have instantiated a few - * blocks outside i_size. Trim these off again. - */ - if (unlikely(iov_iter_rw(iter) == WRITE && ret < 0)) { - loff_t isize = i_size_read(inode); - loff_t end = offset + count; - - if (end > isize) - ext3_truncate_failed_direct_write(inode); - } - if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries)) - goto retry; - - if (orphan) { - int err; - - /* Credits for sb + inode write */ - handle = ext3_journal_start(inode, 2); - if (IS_ERR(handle)) { - /* This is really bad luck. We've written the data - * but cannot extend i_size. Truncate allocated blocks - * and pretend the write failed... */ - ext3_truncate_failed_direct_write(inode); - ret = PTR_ERR(handle); - if (inode->i_nlink) - ext3_orphan_del(NULL, inode); - goto out; - } - if (inode->i_nlink) - ext3_orphan_del(handle, inode); - if (ret > 0) { - loff_t end = offset + ret; - if (end > inode->i_size) { - ei->i_disksize = end; - i_size_write(inode, end); - /* - * We're going to return a positive `ret' - * here due to non-zero-length I/O, so there's - * no way of reporting error returns from - * ext3_mark_inode_dirty() to userspace. So - * ignore it. - */ - ext3_mark_inode_dirty(handle, inode); - } - } - err = ext3_journal_stop(handle); - if (ret == 0) - ret = err; - } -out: - trace_ext3_direct_IO_exit(inode, offset, count, iov_iter_rw(iter), ret); - return ret; -} - -/* - * Pages can be marked dirty completely asynchronously from ext3's journalling - * activity. By filemap_sync_pte(), try_to_unmap_one(), etc. We cannot do - * much here because ->set_page_dirty is called under VFS locks. The page is - * not necessarily locked. - * - * We cannot just dirty the page and leave attached buffers clean, because the - * buffers' dirty state is "definitive". We cannot just set the buffers dirty - * or jbddirty because all the journalling code will explode. - * - * So what we do is to mark the page "pending dirty" and next time writepage - * is called, propagate that into the buffers appropriately. - */ -static int ext3_journalled_set_page_dirty(struct page *page) -{ - SetPageChecked(page); - return __set_page_dirty_nobuffers(page); -} - -static const struct address_space_operations ext3_ordered_aops = { - .readpage = ext3_readpage, - .readpages = ext3_readpages, - .writepage = ext3_ordered_writepage, - .write_begin = ext3_write_begin, - .write_end = ext3_ordered_write_end, - .bmap = ext3_bmap, - .invalidatepage = ext3_invalidatepage, - .releasepage = ext3_releasepage, - .direct_IO = ext3_direct_IO, - .migratepage = buffer_migrate_page, - .is_partially_uptodate = block_is_partially_uptodate, - .is_dirty_writeback = buffer_check_dirty_writeback, - .error_remove_page = generic_error_remove_page, -}; - -static const struct address_space_operations ext3_writeback_aops = { - .readpage = ext3_readpage, - .readpages = ext3_readpages, - .writepage = ext3_writeback_writepage, - .write_begin = ext3_write_begin, - .write_end = ext3_writeback_write_end, - .bmap = ext3_bmap, - .invalidatepage = ext3_invalidatepage, - .releasepage = ext3_releasepage, - .direct_IO = ext3_direct_IO, - .migratepage = buffer_migrate_page, - .is_partially_uptodate = block_is_partially_uptodate, - .error_remove_page = generic_error_remove_page, -}; - -static const struct address_space_operations ext3_journalled_aops = { - .readpage = ext3_readpage, - .readpages = ext3_readpages, - .writepage = ext3_journalled_writepage, - .write_begin = ext3_write_begin, - .write_end = ext3_journalled_write_end, - .set_page_dirty = ext3_journalled_set_page_dirty, - .bmap = ext3_bmap, - .invalidatepage = ext3_invalidatepage, - .releasepage = ext3_releasepage, - .is_partially_uptodate = block_is_partially_uptodate, - .error_remove_page = generic_error_remove_page, -}; - -void ext3_set_aops(struct inode *inode) -{ - if (ext3_should_order_data(inode)) - inode->i_mapping->a_ops = &ext3_ordered_aops; - else if (ext3_should_writeback_data(inode)) - inode->i_mapping->a_ops = &ext3_writeback_aops; - else - inode->i_mapping->a_ops = &ext3_journalled_aops; -} - -/* - * ext3_block_truncate_page() zeroes out a mapping from file offset `from' - * up to the end of the block which corresponds to `from'. - * This required during truncate. We need to physically zero the tail end - * of that block so it doesn't yield old data if the file is later grown. - */ -static int ext3_block_truncate_page(struct inode *inode, loff_t from) -{ - ext3_fsblk_t index = from >> PAGE_CACHE_SHIFT; - unsigned offset = from & (PAGE_CACHE_SIZE - 1); - unsigned blocksize, iblock, length, pos; - struct page *page; - handle_t *handle = NULL; - struct buffer_head *bh; - int err = 0; - - /* Truncated on block boundary - nothing to do */ - blocksize = inode->i_sb->s_blocksize; - if ((from & (blocksize - 1)) == 0) - return 0; - - page = grab_cache_page(inode->i_mapping, index); - if (!page) - return -ENOMEM; - length = blocksize - (offset & (blocksize - 1)); - iblock = index << (PAGE_CACHE_SHIFT - inode->i_sb->s_blocksize_bits); - - if (!page_has_buffers(page)) - create_empty_buffers(page, blocksize, 0); - - /* Find the buffer that contains "offset" */ - bh = page_buffers(page); - pos = blocksize; - while (offset >= pos) { - bh = bh->b_this_page; - iblock++; - pos += blocksize; - } - - err = 0; - if (buffer_freed(bh)) { - BUFFER_TRACE(bh, "freed: skip"); - goto unlock; - } - - if (!buffer_mapped(bh)) { - BUFFER_TRACE(bh, "unmapped"); - ext3_get_block(inode, iblock, bh, 0); - /* unmapped? It's a hole - nothing to do */ - if (!buffer_mapped(bh)) { - BUFFER_TRACE(bh, "still unmapped"); - goto unlock; - } - } - - /* Ok, it's mapped. Make sure it's up-to-date */ - if (PageUptodate(page)) - set_buffer_uptodate(bh); - - if (!bh_uptodate_or_lock(bh)) { - err = bh_submit_read(bh); - /* Uhhuh. Read error. Complain and punt. */ - if (err) - goto unlock; - } - - /* data=writeback mode doesn't need transaction to zero-out data */ - if (!ext3_should_writeback_data(inode)) { - /* We journal at most one block */ - handle = ext3_journal_start(inode, 1); - if (IS_ERR(handle)) { - clear_highpage(page); - flush_dcache_page(page); - err = PTR_ERR(handle); - goto unlock; - } - } - - if (ext3_should_journal_data(inode)) { - BUFFER_TRACE(bh, "get write access"); - err = ext3_journal_get_write_access(handle, bh); - if (err) - goto stop; - } - - zero_user(page, offset, length); - BUFFER_TRACE(bh, "zeroed end of block"); - - err = 0; - if (ext3_should_journal_data(inode)) { - err = ext3_journal_dirty_metadata(handle, bh); - } else { - if (ext3_should_order_data(inode)) - err = ext3_journal_dirty_data(handle, bh); - mark_buffer_dirty(bh); - } -stop: - if (handle) - ext3_journal_stop(handle); - -unlock: - unlock_page(page); - page_cache_release(page); - return err; -} - -/* - * Probably it should be a library function... search for first non-zero word - * or memcmp with zero_page, whatever is better for particular architecture. - * Linus? - */ -static inline int all_zeroes(__le32 *p, __le32 *q) -{ - while (p < q) - if (*p++) - return 0; - return 1; -} - -/** - * ext3_find_shared - find the indirect blocks for partial truncation. - * @inode: inode in question - * @depth: depth of the affected branch - * @offsets: offsets of pointers in that branch (see ext3_block_to_path) - * @chain: place to store the pointers to partial indirect blocks - * @top: place to the (detached) top of branch - * - * This is a helper function used by ext3_truncate(). - * - * When we do truncate() we may have to clean the ends of several - * indirect blocks but leave the blocks themselves alive. Block is - * partially truncated if some data below the new i_size is referred - * from it (and it is on the path to the first completely truncated - * data block, indeed). We have to free the top of that path along - * with everything to the right of the path. Since no allocation - * past the truncation point is possible until ext3_truncate() - * finishes, we may safely do the latter, but top of branch may - * require special attention - pageout below the truncation point - * might try to populate it. - * - * We atomically detach the top of branch from the tree, store the - * block number of its root in *@top, pointers to buffer_heads of - * partially truncated blocks - in @chain[].bh and pointers to - * their last elements that should not be removed - in - * @chain[].p. Return value is the pointer to last filled element - * of @chain. - * - * The work left to caller to do the actual freeing of subtrees: - * a) free the subtree starting from *@top - * b) free the subtrees whose roots are stored in - * (@chain[i].p+1 .. end of @chain[i].bh->b_data) - * c) free the subtrees growing from the inode past the @chain[0]. - * (no partially truncated stuff there). */ - -static Indirect *ext3_find_shared(struct inode *inode, int depth, - int offsets[4], Indirect chain[4], __le32 *top) -{ - Indirect *partial, *p; - int k, err; - - *top = 0; - /* Make k index the deepest non-null offset + 1 */ - for (k = depth; k > 1 && !offsets[k-1]; k--) - ; - partial = ext3_get_branch(inode, k, offsets, chain, &err); - /* Writer: pointers */ - if (!partial) - partial = chain + k-1; - /* - * If the branch acquired continuation since we've looked at it - - * fine, it should all survive and (new) top doesn't belong to us. - */ - if (!partial->key && *partial->p) - /* Writer: end */ - goto no_top; - for (p=partial; p>chain && all_zeroes((__le32*)p->bh->b_data,p->p); p--) - ; - /* - * OK, we've found the last block that must survive. The rest of our - * branch should be detached before unlocking. However, if that rest - * of branch is all ours and does not grow immediately from the inode - * it's easier to cheat and just decrement partial->p. - */ - if (p == chain + k - 1 && p > chain) { - p->p--; - } else { - *top = *p->p; - /* Nope, don't do this in ext3. Must leave the tree intact */ -#if 0 - *p->p = 0; -#endif - } - /* Writer: end */ - - while(partial > p) { - brelse(partial->bh); - partial--; - } -no_top: - return partial; -} - -/* - * Zero a number of block pointers in either an inode or an indirect block. - * If we restart the transaction we must again get write access to the - * indirect block for further modification. - * - * We release `count' blocks on disk, but (last - first) may be greater - * than `count' because there can be holes in there. - */ -static void ext3_clear_blocks(handle_t *handle, struct inode *inode, - struct buffer_head *bh, ext3_fsblk_t block_to_free, - unsigned long count, __le32 *first, __le32 *last) -{ - __le32 *p; - if (try_to_extend_transaction(handle, inode)) { - if (bh) { - BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata"); - if (ext3_journal_dirty_metadata(handle, bh)) - return; - } - ext3_mark_inode_dirty(handle, inode); - truncate_restart_transaction(handle, inode); - if (bh) { - BUFFER_TRACE(bh, "retaking write access"); - if (ext3_journal_get_write_access(handle, bh)) - return; - } - } - - /* - * Any buffers which are on the journal will be in memory. We find - * them on the hash table so journal_revoke() will run journal_forget() - * on them. We've already detached each block from the file, so - * bforget() in journal_forget() should be safe. - * - * AKPM: turn on bforget in journal_forget()!!! - */ - for (p = first; p < last; p++) { - u32 nr = le32_to_cpu(*p); - if (nr) { - struct buffer_head *bh; - - *p = 0; - bh = sb_find_get_block(inode->i_sb, nr); - ext3_forget(handle, 0, inode, bh, nr); - } - } - - ext3_free_blocks(handle, inode, block_to_free, count); -} - -/** - * ext3_free_data - free a list of data blocks - * @handle: handle for this transaction - * @inode: inode we are dealing with - * @this_bh: indirect buffer_head which contains *@first and *@last - * @first: array of block numbers - * @last: points immediately past the end of array - * - * We are freeing all blocks referred from that array (numbers are stored as - * little-endian 32-bit) and updating @inode->i_blocks appropriately. - * - * We accumulate contiguous runs of blocks to free. Conveniently, if these - * blocks are contiguous then releasing them at one time will only affect one - * or two bitmap blocks (+ group descriptor(s) and superblock) and we won't - * actually use a lot of journal space. - * - * @this_bh will be %NULL if @first and @last point into the inode's direct - * block pointers. - */ -static void ext3_free_data(handle_t *handle, struct inode *inode, - struct buffer_head *this_bh, - __le32 *first, __le32 *last) -{ - ext3_fsblk_t block_to_free = 0; /* Starting block # of a run */ - unsigned long count = 0; /* Number of blocks in the run */ - __le32 *block_to_free_p = NULL; /* Pointer into inode/ind - corresponding to - block_to_free */ - ext3_fsblk_t nr; /* Current block # */ - __le32 *p; /* Pointer into inode/ind - for current block */ - int err; - - if (this_bh) { /* For indirect block */ - BUFFER_TRACE(this_bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, this_bh); - /* Important: if we can't update the indirect pointers - * to the blocks, we can't free them. */ - if (err) - return; - } - - for (p = first; p < last; p++) { - nr = le32_to_cpu(*p); - if (nr) { - /* accumulate blocks to free if they're contiguous */ - if (count == 0) { - block_to_free = nr; - block_to_free_p = p; - count = 1; - } else if (nr == block_to_free + count) { - count++; - } else { - ext3_clear_blocks(handle, inode, this_bh, - block_to_free, - count, block_to_free_p, p); - block_to_free = nr; - block_to_free_p = p; - count = 1; - } - } - } - - if (count > 0) - ext3_clear_blocks(handle, inode, this_bh, block_to_free, - count, block_to_free_p, p); - - if (this_bh) { - BUFFER_TRACE(this_bh, "call ext3_journal_dirty_metadata"); - - /* - * The buffer head should have an attached journal head at this - * point. However, if the data is corrupted and an indirect - * block pointed to itself, it would have been detached when - * the block was cleared. Check for this instead of OOPSing. - */ - if (bh2jh(this_bh)) - ext3_journal_dirty_metadata(handle, this_bh); - else - ext3_error(inode->i_sb, "ext3_free_data", - "circular indirect block detected, " - "inode=%lu, block=%llu", - inode->i_ino, - (unsigned long long)this_bh->b_blocknr); - } -} - -/** - * ext3_free_branches - free an array of branches - * @handle: JBD handle for this transaction - * @inode: inode we are dealing with - * @parent_bh: the buffer_head which contains *@first and *@last - * @first: array of block numbers - * @last: pointer immediately past the end of array - * @depth: depth of the branches to free - * - * We are freeing all blocks referred from these branches (numbers are - * stored as little-endian 32-bit) and updating @inode->i_blocks - * appropriately. - */ -static void ext3_free_branches(handle_t *handle, struct inode *inode, - struct buffer_head *parent_bh, - __le32 *first, __le32 *last, int depth) -{ - ext3_fsblk_t nr; - __le32 *p; - - if (is_handle_aborted(handle)) - return; - - if (depth--) { - struct buffer_head *bh; - int addr_per_block = EXT3_ADDR_PER_BLOCK(inode->i_sb); - p = last; - while (--p >= first) { - nr = le32_to_cpu(*p); - if (!nr) - continue; /* A hole */ - - /* Go read the buffer for the next level down */ - bh = sb_bread(inode->i_sb, nr); - - /* - * A read failure? Report error and clear slot - * (should be rare). - */ - if (!bh) { - ext3_error(inode->i_sb, "ext3_free_branches", - "Read failure, inode=%lu, block="E3FSBLK, - inode->i_ino, nr); - continue; - } - - /* This zaps the entire block. Bottom up. */ - BUFFER_TRACE(bh, "free child branches"); - ext3_free_branches(handle, inode, bh, - (__le32*)bh->b_data, - (__le32*)bh->b_data + addr_per_block, - depth); - - /* - * Everything below this this pointer has been - * released. Now let this top-of-subtree go. - * - * We want the freeing of this indirect block to be - * atomic in the journal with the updating of the - * bitmap block which owns it. So make some room in - * the journal. - * - * We zero the parent pointer *after* freeing its - * pointee in the bitmaps, so if extend_transaction() - * for some reason fails to put the bitmap changes and - * the release into the same transaction, recovery - * will merely complain about releasing a free block, - * rather than leaking blocks. - */ - if (is_handle_aborted(handle)) - return; - if (try_to_extend_transaction(handle, inode)) { - ext3_mark_inode_dirty(handle, inode); - truncate_restart_transaction(handle, inode); - } - - /* - * We've probably journalled the indirect block several - * times during the truncate. But it's no longer - * needed and we now drop it from the transaction via - * journal_revoke(). - * - * That's easy if it's exclusively part of this - * transaction. But if it's part of the committing - * transaction then journal_forget() will simply - * brelse() it. That means that if the underlying - * block is reallocated in ext3_get_block(), - * unmap_underlying_metadata() will find this block - * and will try to get rid of it. damn, damn. Thus - * we don't allow a block to be reallocated until - * a transaction freeing it has fully committed. - * - * We also have to make sure journal replay after a - * crash does not overwrite non-journaled data blocks - * with old metadata when the block got reallocated for - * data. Thus we have to store a revoke record for a - * block in the same transaction in which we free the - * block. - */ - ext3_forget(handle, 1, inode, bh, bh->b_blocknr); - - ext3_free_blocks(handle, inode, nr, 1); - - if (parent_bh) { - /* - * The block which we have just freed is - * pointed to by an indirect block: journal it - */ - BUFFER_TRACE(parent_bh, "get_write_access"); - if (!ext3_journal_get_write_access(handle, - parent_bh)){ - *p = 0; - BUFFER_TRACE(parent_bh, - "call ext3_journal_dirty_metadata"); - ext3_journal_dirty_metadata(handle, - parent_bh); - } - } - } - } else { - /* We have reached the bottom of the tree. */ - BUFFER_TRACE(parent_bh, "free data blocks"); - ext3_free_data(handle, inode, parent_bh, first, last); - } -} - -int ext3_can_truncate(struct inode *inode) -{ - if (S_ISREG(inode->i_mode)) - return 1; - if (S_ISDIR(inode->i_mode)) - return 1; - if (S_ISLNK(inode->i_mode)) - return !ext3_inode_is_fast_symlink(inode); - return 0; -} - -/* - * ext3_truncate() - * - * We block out ext3_get_block() block instantiations across the entire - * transaction, and VFS/VM ensures that ext3_truncate() cannot run - * simultaneously on behalf of the same inode. - * - * As we work through the truncate and commit bits of it to the journal there - * is one core, guiding principle: the file's tree must always be consistent on - * disk. We must be able to restart the truncate after a crash. - * - * The file's tree may be transiently inconsistent in memory (although it - * probably isn't), but whenever we close off and commit a journal transaction, - * the contents of (the filesystem + the journal) must be consistent and - * restartable. It's pretty simple, really: bottom up, right to left (although - * left-to-right works OK too). - * - * Note that at recovery time, journal replay occurs *before* the restart of - * truncate against the orphan inode list. - * - * The committed inode has the new, desired i_size (which is the same as - * i_disksize in this case). After a crash, ext3_orphan_cleanup() will see - * that this inode's truncate did not complete and it will again call - * ext3_truncate() to have another go. So there will be instantiated blocks - * to the right of the truncation point in a crashed ext3 filesystem. But - * that's fine - as long as they are linked from the inode, the post-crash - * ext3_truncate() run will find them and release them. - */ -void ext3_truncate(struct inode *inode) -{ - handle_t *handle; - struct ext3_inode_info *ei = EXT3_I(inode); - __le32 *i_data = ei->i_data; - int addr_per_block = EXT3_ADDR_PER_BLOCK(inode->i_sb); - int offsets[4]; - Indirect chain[4]; - Indirect *partial; - __le32 nr = 0; - int n; - long last_block; - unsigned blocksize = inode->i_sb->s_blocksize; - - trace_ext3_truncate_enter(inode); - - if (!ext3_can_truncate(inode)) - goto out_notrans; - - if (inode->i_size == 0 && ext3_should_writeback_data(inode)) - ext3_set_inode_state(inode, EXT3_STATE_FLUSH_ON_CLOSE); - - handle = start_transaction(inode); - if (IS_ERR(handle)) - goto out_notrans; - - last_block = (inode->i_size + blocksize-1) - >> EXT3_BLOCK_SIZE_BITS(inode->i_sb); - n = ext3_block_to_path(inode, last_block, offsets, NULL); - if (n == 0) - goto out_stop; /* error */ - - /* - * OK. This truncate is going to happen. We add the inode to the - * orphan list, so that if this truncate spans multiple transactions, - * and we crash, we will resume the truncate when the filesystem - * recovers. It also marks the inode dirty, to catch the new size. - * - * Implication: the file must always be in a sane, consistent - * truncatable state while each transaction commits. - */ - if (ext3_orphan_add(handle, inode)) - goto out_stop; - - /* - * The orphan list entry will now protect us from any crash which - * occurs before the truncate completes, so it is now safe to propagate - * the new, shorter inode size (held for now in i_size) into the - * on-disk inode. We do this via i_disksize, which is the value which - * ext3 *really* writes onto the disk inode. - */ - ei->i_disksize = inode->i_size; - - /* - * From here we block out all ext3_get_block() callers who want to - * modify the block allocation tree. - */ - mutex_lock(&ei->truncate_mutex); - - if (n == 1) { /* direct blocks */ - ext3_free_data(handle, inode, NULL, i_data+offsets[0], - i_data + EXT3_NDIR_BLOCKS); - goto do_indirects; - } - - partial = ext3_find_shared(inode, n, offsets, chain, &nr); - /* Kill the top of shared branch (not detached) */ - if (nr) { - if (partial == chain) { - /* Shared branch grows from the inode */ - ext3_free_branches(handle, inode, NULL, - &nr, &nr+1, (chain+n-1) - partial); - *partial->p = 0; - /* - * We mark the inode dirty prior to restart, - * and prior to stop. No need for it here. - */ - } else { - /* Shared branch grows from an indirect block */ - ext3_free_branches(handle, inode, partial->bh, - partial->p, - partial->p+1, (chain+n-1) - partial); - } - } - /* Clear the ends of indirect blocks on the shared branch */ - while (partial > chain) { - ext3_free_branches(handle, inode, partial->bh, partial->p + 1, - (__le32*)partial->bh->b_data+addr_per_block, - (chain+n-1) - partial); - BUFFER_TRACE(partial->bh, "call brelse"); - brelse (partial->bh); - partial--; - } -do_indirects: - /* Kill the remaining (whole) subtrees */ - switch (offsets[0]) { - default: - nr = i_data[EXT3_IND_BLOCK]; - if (nr) { - ext3_free_branches(handle, inode, NULL, &nr, &nr+1, 1); - i_data[EXT3_IND_BLOCK] = 0; - } - case EXT3_IND_BLOCK: - nr = i_data[EXT3_DIND_BLOCK]; - if (nr) { - ext3_free_branches(handle, inode, NULL, &nr, &nr+1, 2); - i_data[EXT3_DIND_BLOCK] = 0; - } - case EXT3_DIND_BLOCK: - nr = i_data[EXT3_TIND_BLOCK]; - if (nr) { - ext3_free_branches(handle, inode, NULL, &nr, &nr+1, 3); - i_data[EXT3_TIND_BLOCK] = 0; - } - case EXT3_TIND_BLOCK: - ; - } - - ext3_discard_reservation(inode); - - mutex_unlock(&ei->truncate_mutex); - inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC; - ext3_mark_inode_dirty(handle, inode); - - /* - * In a multi-transaction truncate, we only make the final transaction - * synchronous - */ - if (IS_SYNC(inode)) - handle->h_sync = 1; -out_stop: - /* - * If this was a simple ftruncate(), and the file will remain alive - * then we need to clear up the orphan record which we created above. - * However, if this was a real unlink then we were called by - * ext3_evict_inode(), and we allow that function to clean up the - * orphan info for us. - */ - if (inode->i_nlink) - ext3_orphan_del(handle, inode); - - ext3_journal_stop(handle); - trace_ext3_truncate_exit(inode); - return; -out_notrans: - /* - * Delete the inode from orphan list so that it doesn't stay there - * forever and trigger assertion on umount. - */ - if (inode->i_nlink) - ext3_orphan_del(NULL, inode); - trace_ext3_truncate_exit(inode); -} - -static ext3_fsblk_t ext3_get_inode_block(struct super_block *sb, - unsigned long ino, struct ext3_iloc *iloc) -{ - unsigned long block_group; - unsigned long offset; - ext3_fsblk_t block; - struct ext3_group_desc *gdp; - - if (!ext3_valid_inum(sb, ino)) { - /* - * This error is already checked for in namei.c unless we are - * looking at an NFS filehandle, in which case no error - * report is needed - */ - return 0; - } - - block_group = (ino - 1) / EXT3_INODES_PER_GROUP(sb); - gdp = ext3_get_group_desc(sb, block_group, NULL); - if (!gdp) - return 0; - /* - * Figure out the offset within the block group inode table - */ - offset = ((ino - 1) % EXT3_INODES_PER_GROUP(sb)) * - EXT3_INODE_SIZE(sb); - block = le32_to_cpu(gdp->bg_inode_table) + - (offset >> EXT3_BLOCK_SIZE_BITS(sb)); - - iloc->block_group = block_group; - iloc->offset = offset & (EXT3_BLOCK_SIZE(sb) - 1); - return block; -} - -/* - * ext3_get_inode_loc returns with an extra refcount against the inode's - * underlying buffer_head on success. If 'in_mem' is true, we have all - * data in memory that is needed to recreate the on-disk version of this - * inode. - */ -static int __ext3_get_inode_loc(struct inode *inode, - struct ext3_iloc *iloc, int in_mem) -{ - ext3_fsblk_t block; - struct buffer_head *bh; - - block = ext3_get_inode_block(inode->i_sb, inode->i_ino, iloc); - if (!block) - return -EIO; - - bh = sb_getblk(inode->i_sb, block); - if (unlikely(!bh)) { - ext3_error (inode->i_sb, "ext3_get_inode_loc", - "unable to read inode block - " - "inode=%lu, block="E3FSBLK, - inode->i_ino, block); - return -ENOMEM; - } - if (!buffer_uptodate(bh)) { - lock_buffer(bh); - - /* - * If the buffer has the write error flag, we have failed - * to write out another inode in the same block. In this - * case, we don't have to read the block because we may - * read the old inode data successfully. - */ - if (buffer_write_io_error(bh) && !buffer_uptodate(bh)) - set_buffer_uptodate(bh); - - if (buffer_uptodate(bh)) { - /* someone brought it uptodate while we waited */ - unlock_buffer(bh); - goto has_buffer; - } - - /* - * If we have all information of the inode in memory and this - * is the only valid inode in the block, we need not read the - * block. - */ - if (in_mem) { - struct buffer_head *bitmap_bh; - struct ext3_group_desc *desc; - int inodes_per_buffer; - int inode_offset, i; - int block_group; - int start; - - block_group = (inode->i_ino - 1) / - EXT3_INODES_PER_GROUP(inode->i_sb); - inodes_per_buffer = bh->b_size / - EXT3_INODE_SIZE(inode->i_sb); - inode_offset = ((inode->i_ino - 1) % - EXT3_INODES_PER_GROUP(inode->i_sb)); - start = inode_offset & ~(inodes_per_buffer - 1); - - /* Is the inode bitmap in cache? */ - desc = ext3_get_group_desc(inode->i_sb, - block_group, NULL); - if (!desc) - goto make_io; - - bitmap_bh = sb_getblk(inode->i_sb, - le32_to_cpu(desc->bg_inode_bitmap)); - if (unlikely(!bitmap_bh)) - goto make_io; - - /* - * If the inode bitmap isn't in cache then the - * optimisation may end up performing two reads instead - * of one, so skip it. - */ - if (!buffer_uptodate(bitmap_bh)) { - brelse(bitmap_bh); - goto make_io; - } - for (i = start; i < start + inodes_per_buffer; i++) { - if (i == inode_offset) - continue; - if (ext3_test_bit(i, bitmap_bh->b_data)) - break; - } - brelse(bitmap_bh); - if (i == start + inodes_per_buffer) { - /* all other inodes are free, so skip I/O */ - memset(bh->b_data, 0, bh->b_size); - set_buffer_uptodate(bh); - unlock_buffer(bh); - goto has_buffer; - } - } - -make_io: - /* - * There are other valid inodes in the buffer, this inode - * has in-inode xattrs, or we don't have this inode in memory. - * Read the block from disk. - */ - trace_ext3_load_inode(inode); - get_bh(bh); - bh->b_end_io = end_buffer_read_sync; - submit_bh(READ | REQ_META | REQ_PRIO, bh); - wait_on_buffer(bh); - if (!buffer_uptodate(bh)) { - ext3_error(inode->i_sb, "ext3_get_inode_loc", - "unable to read inode block - " - "inode=%lu, block="E3FSBLK, - inode->i_ino, block); - brelse(bh); - return -EIO; - } - } -has_buffer: - iloc->bh = bh; - return 0; -} - -int ext3_get_inode_loc(struct inode *inode, struct ext3_iloc *iloc) -{ - /* We have all inode data except xattrs in memory here. */ - return __ext3_get_inode_loc(inode, iloc, - !ext3_test_inode_state(inode, EXT3_STATE_XATTR)); -} - -void ext3_set_inode_flags(struct inode *inode) -{ - unsigned int flags = EXT3_I(inode)->i_flags; - - inode->i_flags &= ~(S_SYNC|S_APPEND|S_IMMUTABLE|S_NOATIME|S_DIRSYNC); - if (flags & EXT3_SYNC_FL) - inode->i_flags |= S_SYNC; - if (flags & EXT3_APPEND_FL) - inode->i_flags |= S_APPEND; - if (flags & EXT3_IMMUTABLE_FL) - inode->i_flags |= S_IMMUTABLE; - if (flags & EXT3_NOATIME_FL) - inode->i_flags |= S_NOATIME; - if (flags & EXT3_DIRSYNC_FL) - inode->i_flags |= S_DIRSYNC; -} - -/* Propagate flags from i_flags to EXT3_I(inode)->i_flags */ -void ext3_get_inode_flags(struct ext3_inode_info *ei) -{ - unsigned int flags = ei->vfs_inode.i_flags; - - ei->i_flags &= ~(EXT3_SYNC_FL|EXT3_APPEND_FL| - EXT3_IMMUTABLE_FL|EXT3_NOATIME_FL|EXT3_DIRSYNC_FL); - if (flags & S_SYNC) - ei->i_flags |= EXT3_SYNC_FL; - if (flags & S_APPEND) - ei->i_flags |= EXT3_APPEND_FL; - if (flags & S_IMMUTABLE) - ei->i_flags |= EXT3_IMMUTABLE_FL; - if (flags & S_NOATIME) - ei->i_flags |= EXT3_NOATIME_FL; - if (flags & S_DIRSYNC) - ei->i_flags |= EXT3_DIRSYNC_FL; -} - -struct inode *ext3_iget(struct super_block *sb, unsigned long ino) -{ - struct ext3_iloc iloc; - struct ext3_inode *raw_inode; - struct ext3_inode_info *ei; - struct buffer_head *bh; - struct inode *inode; - journal_t *journal = EXT3_SB(sb)->s_journal; - transaction_t *transaction; - long ret; - int block; - uid_t i_uid; - gid_t i_gid; - - inode = iget_locked(sb, ino); - if (!inode) - return ERR_PTR(-ENOMEM); - if (!(inode->i_state & I_NEW)) - return inode; - - ei = EXT3_I(inode); - ei->i_block_alloc_info = NULL; - - ret = __ext3_get_inode_loc(inode, &iloc, 0); - if (ret < 0) - goto bad_inode; - bh = iloc.bh; - raw_inode = ext3_raw_inode(&iloc); - inode->i_mode = le16_to_cpu(raw_inode->i_mode); - i_uid = (uid_t)le16_to_cpu(raw_inode->i_uid_low); - i_gid = (gid_t)le16_to_cpu(raw_inode->i_gid_low); - if(!(test_opt (inode->i_sb, NO_UID32))) { - i_uid |= le16_to_cpu(raw_inode->i_uid_high) << 16; - i_gid |= le16_to_cpu(raw_inode->i_gid_high) << 16; - } - i_uid_write(inode, i_uid); - i_gid_write(inode, i_gid); - set_nlink(inode, le16_to_cpu(raw_inode->i_links_count)); - inode->i_size = le32_to_cpu(raw_inode->i_size); - inode->i_atime.tv_sec = (signed)le32_to_cpu(raw_inode->i_atime); - inode->i_ctime.tv_sec = (signed)le32_to_cpu(raw_inode->i_ctime); - inode->i_mtime.tv_sec = (signed)le32_to_cpu(raw_inode->i_mtime); - inode->i_atime.tv_nsec = inode->i_ctime.tv_nsec = inode->i_mtime.tv_nsec = 0; - - ei->i_state_flags = 0; - ei->i_dir_start_lookup = 0; - ei->i_dtime = le32_to_cpu(raw_inode->i_dtime); - /* We now have enough fields to check if the inode was active or not. - * This is needed because nfsd might try to access dead inodes - * the test is that same one that e2fsck uses - * NeilBrown 1999oct15 - */ - if (inode->i_nlink == 0) { - if (inode->i_mode == 0 || - !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ORPHAN_FS)) { - /* this inode is deleted */ - brelse (bh); - ret = -ESTALE; - goto bad_inode; - } - /* The only unlinked inodes we let through here have - * valid i_mode and are being read by the orphan - * recovery code: that's fine, we're about to complete - * the process of deleting those. */ - } - inode->i_blocks = le32_to_cpu(raw_inode->i_blocks); - ei->i_flags = le32_to_cpu(raw_inode->i_flags); -#ifdef EXT3_FRAGMENTS - ei->i_faddr = le32_to_cpu(raw_inode->i_faddr); - ei->i_frag_no = raw_inode->i_frag; - ei->i_frag_size = raw_inode->i_fsize; -#endif - ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl); - if (!S_ISREG(inode->i_mode)) { - ei->i_dir_acl = le32_to_cpu(raw_inode->i_dir_acl); - } else { - inode->i_size |= - ((__u64)le32_to_cpu(raw_inode->i_size_high)) << 32; - } - ei->i_disksize = inode->i_size; - inode->i_generation = le32_to_cpu(raw_inode->i_generation); - ei->i_block_group = iloc.block_group; - /* - * NOTE! The in-memory inode i_data array is in little-endian order - * even on big-endian machines: we do NOT byteswap the block numbers! - */ - for (block = 0; block < EXT3_N_BLOCKS; block++) - ei->i_data[block] = raw_inode->i_block[block]; - INIT_LIST_HEAD(&ei->i_orphan); - - /* - * Set transaction id's of transactions that have to be committed - * to finish f[data]sync. We set them to currently running transaction - * as we cannot be sure that the inode or some of its metadata isn't - * part of the transaction - the inode could have been reclaimed and - * now it is reread from disk. - */ - if (journal) { - tid_t tid; - - spin_lock(&journal->j_state_lock); - if (journal->j_running_transaction) - transaction = journal->j_running_transaction; - else - transaction = journal->j_committing_transaction; - if (transaction) - tid = transaction->t_tid; - else - tid = journal->j_commit_sequence; - spin_unlock(&journal->j_state_lock); - atomic_set(&ei->i_sync_tid, tid); - atomic_set(&ei->i_datasync_tid, tid); - } - - if (inode->i_ino >= EXT3_FIRST_INO(inode->i_sb) + 1 && - EXT3_INODE_SIZE(inode->i_sb) > EXT3_GOOD_OLD_INODE_SIZE) { - /* - * When mke2fs creates big inodes it does not zero out - * the unused bytes above EXT3_GOOD_OLD_INODE_SIZE, - * so ignore those first few inodes. - */ - ei->i_extra_isize = le16_to_cpu(raw_inode->i_extra_isize); - if (EXT3_GOOD_OLD_INODE_SIZE + ei->i_extra_isize > - EXT3_INODE_SIZE(inode->i_sb)) { - brelse (bh); - ret = -EIO; - goto bad_inode; - } - if (ei->i_extra_isize == 0) { - /* The extra space is currently unused. Use it. */ - ei->i_extra_isize = sizeof(struct ext3_inode) - - EXT3_GOOD_OLD_INODE_SIZE; - } else { - __le32 *magic = (void *)raw_inode + - EXT3_GOOD_OLD_INODE_SIZE + - ei->i_extra_isize; - if (*magic == cpu_to_le32(EXT3_XATTR_MAGIC)) - ext3_set_inode_state(inode, EXT3_STATE_XATTR); - } - } else - ei->i_extra_isize = 0; - - if (S_ISREG(inode->i_mode)) { - inode->i_op = &ext3_file_inode_operations; - inode->i_fop = &ext3_file_operations; - ext3_set_aops(inode); - } else if (S_ISDIR(inode->i_mode)) { - inode->i_op = &ext3_dir_inode_operations; - inode->i_fop = &ext3_dir_operations; - } else if (S_ISLNK(inode->i_mode)) { - if (ext3_inode_is_fast_symlink(inode)) { - inode->i_op = &ext3_fast_symlink_inode_operations; - nd_terminate_link(ei->i_data, inode->i_size, - sizeof(ei->i_data) - 1); - inode->i_link = (char *)ei->i_data; - } else { - inode->i_op = &ext3_symlink_inode_operations; - ext3_set_aops(inode); - } - } else { - inode->i_op = &ext3_special_inode_operations; - if (raw_inode->i_block[0]) - init_special_inode(inode, inode->i_mode, - old_decode_dev(le32_to_cpu(raw_inode->i_block[0]))); - else - init_special_inode(inode, inode->i_mode, - new_decode_dev(le32_to_cpu(raw_inode->i_block[1]))); - } - brelse (iloc.bh); - ext3_set_inode_flags(inode); - unlock_new_inode(inode); - return inode; - -bad_inode: - iget_failed(inode); - return ERR_PTR(ret); -} - -/* - * Post the struct inode info into an on-disk inode location in the - * buffer-cache. This gobbles the caller's reference to the - * buffer_head in the inode location struct. - * - * The caller must have write access to iloc->bh. - */ -static int ext3_do_update_inode(handle_t *handle, - struct inode *inode, - struct ext3_iloc *iloc) -{ - struct ext3_inode *raw_inode = ext3_raw_inode(iloc); - struct ext3_inode_info *ei = EXT3_I(inode); - struct buffer_head *bh = iloc->bh; - int err = 0, rc, block; - int need_datasync = 0; - __le32 disksize; - uid_t i_uid; - gid_t i_gid; - -again: - /* we can't allow multiple procs in here at once, its a bit racey */ - lock_buffer(bh); - - /* For fields not not tracking in the in-memory inode, - * initialise them to zero for new inodes. */ - if (ext3_test_inode_state(inode, EXT3_STATE_NEW)) - memset(raw_inode, 0, EXT3_SB(inode->i_sb)->s_inode_size); - - ext3_get_inode_flags(ei); - raw_inode->i_mode = cpu_to_le16(inode->i_mode); - i_uid = i_uid_read(inode); - i_gid = i_gid_read(inode); - if(!(test_opt(inode->i_sb, NO_UID32))) { - raw_inode->i_uid_low = cpu_to_le16(low_16_bits(i_uid)); - raw_inode->i_gid_low = cpu_to_le16(low_16_bits(i_gid)); -/* - * Fix up interoperability with old kernels. Otherwise, old inodes get - * re-used with the upper 16 bits of the uid/gid intact - */ - if(!ei->i_dtime) { - raw_inode->i_uid_high = - cpu_to_le16(high_16_bits(i_uid)); - raw_inode->i_gid_high = - cpu_to_le16(high_16_bits(i_gid)); - } else { - raw_inode->i_uid_high = 0; - raw_inode->i_gid_high = 0; - } - } else { - raw_inode->i_uid_low = - cpu_to_le16(fs_high2lowuid(i_uid)); - raw_inode->i_gid_low = - cpu_to_le16(fs_high2lowgid(i_gid)); - raw_inode->i_uid_high = 0; - raw_inode->i_gid_high = 0; - } - raw_inode->i_links_count = cpu_to_le16(inode->i_nlink); - disksize = cpu_to_le32(ei->i_disksize); - if (disksize != raw_inode->i_size) { - need_datasync = 1; - raw_inode->i_size = disksize; - } - raw_inode->i_atime = cpu_to_le32(inode->i_atime.tv_sec); - raw_inode->i_ctime = cpu_to_le32(inode->i_ctime.tv_sec); - raw_inode->i_mtime = cpu_to_le32(inode->i_mtime.tv_sec); - raw_inode->i_blocks = cpu_to_le32(inode->i_blocks); - raw_inode->i_dtime = cpu_to_le32(ei->i_dtime); - raw_inode->i_flags = cpu_to_le32(ei->i_flags); -#ifdef EXT3_FRAGMENTS - raw_inode->i_faddr = cpu_to_le32(ei->i_faddr); - raw_inode->i_frag = ei->i_frag_no; - raw_inode->i_fsize = ei->i_frag_size; -#endif - raw_inode->i_file_acl = cpu_to_le32(ei->i_file_acl); - if (!S_ISREG(inode->i_mode)) { - raw_inode->i_dir_acl = cpu_to_le32(ei->i_dir_acl); - } else { - disksize = cpu_to_le32(ei->i_disksize >> 32); - if (disksize != raw_inode->i_size_high) { - raw_inode->i_size_high = disksize; - need_datasync = 1; - } - if (ei->i_disksize > 0x7fffffffULL) { - struct super_block *sb = inode->i_sb; - if (!EXT3_HAS_RO_COMPAT_FEATURE(sb, - EXT3_FEATURE_RO_COMPAT_LARGE_FILE) || - EXT3_SB(sb)->s_es->s_rev_level == - cpu_to_le32(EXT3_GOOD_OLD_REV)) { - /* If this is the first large file - * created, add a flag to the superblock. - */ - unlock_buffer(bh); - err = ext3_journal_get_write_access(handle, - EXT3_SB(sb)->s_sbh); - if (err) - goto out_brelse; - - ext3_update_dynamic_rev(sb); - EXT3_SET_RO_COMPAT_FEATURE(sb, - EXT3_FEATURE_RO_COMPAT_LARGE_FILE); - handle->h_sync = 1; - err = ext3_journal_dirty_metadata(handle, - EXT3_SB(sb)->s_sbh); - /* get our lock and start over */ - goto again; - } - } - } - raw_inode->i_generation = cpu_to_le32(inode->i_generation); - if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) { - if (old_valid_dev(inode->i_rdev)) { - raw_inode->i_block[0] = - cpu_to_le32(old_encode_dev(inode->i_rdev)); - raw_inode->i_block[1] = 0; - } else { - raw_inode->i_block[0] = 0; - raw_inode->i_block[1] = - cpu_to_le32(new_encode_dev(inode->i_rdev)); - raw_inode->i_block[2] = 0; - } - } else for (block = 0; block < EXT3_N_BLOCKS; block++) - raw_inode->i_block[block] = ei->i_data[block]; - - if (ei->i_extra_isize) - raw_inode->i_extra_isize = cpu_to_le16(ei->i_extra_isize); - - BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata"); - unlock_buffer(bh); - rc = ext3_journal_dirty_metadata(handle, bh); - if (!err) - err = rc; - ext3_clear_inode_state(inode, EXT3_STATE_NEW); - - atomic_set(&ei->i_sync_tid, handle->h_transaction->t_tid); - if (need_datasync) - atomic_set(&ei->i_datasync_tid, handle->h_transaction->t_tid); -out_brelse: - brelse (bh); - ext3_std_error(inode->i_sb, err); - return err; -} - -/* - * ext3_write_inode() - * - * We are called from a few places: - * - * - Within generic_file_aio_write() -> generic_write_sync() for O_SYNC files. - * Here, there will be no transaction running. We wait for any running - * transaction to commit. - * - * - Within flush work (for sys_sync(), kupdate and such). - * We wait on commit, if told to. - * - * - Within iput_final() -> write_inode_now() - * We wait on commit, if told to. - * - * In all cases it is actually safe for us to return without doing anything, - * because the inode has been copied into a raw inode buffer in - * ext3_mark_inode_dirty(). This is a correctness thing for WB_SYNC_ALL - * writeback. - * - * Note that we are absolutely dependent upon all inode dirtiers doing the - * right thing: they *must* call mark_inode_dirty() after dirtying info in - * which we are interested. - * - * It would be a bug for them to not do this. The code: - * - * mark_inode_dirty(inode) - * stuff(); - * inode->i_size = expr; - * - * is in error because write_inode() could occur while `stuff()' is running, - * and the new i_size will be lost. Plus the inode will no longer be on the - * superblock's dirty inode list. - */ -int ext3_write_inode(struct inode *inode, struct writeback_control *wbc) -{ - if (WARN_ON_ONCE(current->flags & PF_MEMALLOC)) - return 0; - - if (ext3_journal_current_handle()) { - jbd_debug(1, "called recursively, non-PF_MEMALLOC!\n"); - dump_stack(); - return -EIO; - } - - /* - * No need to force transaction in WB_SYNC_NONE mode. Also - * ext3_sync_fs() will force the commit after everything is - * written. - */ - if (wbc->sync_mode != WB_SYNC_ALL || wbc->for_sync) - return 0; - - return ext3_force_commit(inode->i_sb); -} - -/* - * ext3_setattr() - * - * Called from notify_change. - * - * We want to trap VFS attempts to truncate the file as soon as - * possible. In particular, we want to make sure that when the VFS - * shrinks i_size, we put the inode on the orphan list and modify - * i_disksize immediately, so that during the subsequent flushing of - * dirty pages and freeing of disk blocks, we can guarantee that any - * commit will leave the blocks being flushed in an unused state on - * disk. (On recovery, the inode will get truncated and the blocks will - * be freed, so we have a strong guarantee that no future commit will - * leave these blocks visible to the user.) - * - * Called with inode->sem down. - */ -int ext3_setattr(struct dentry *dentry, struct iattr *attr) -{ - struct inode *inode = d_inode(dentry); - int error, rc = 0; - const unsigned int ia_valid = attr->ia_valid; - - error = inode_change_ok(inode, attr); - if (error) - return error; - - if (is_quota_modification(inode, attr)) - dquot_initialize(inode); - if ((ia_valid & ATTR_UID && !uid_eq(attr->ia_uid, inode->i_uid)) || - (ia_valid & ATTR_GID && !gid_eq(attr->ia_gid, inode->i_gid))) { - handle_t *handle; - - /* (user+group)*(old+new) structure, inode write (sb, - * inode block, ? - but truncate inode update has it) */ - handle = ext3_journal_start(inode, EXT3_MAXQUOTAS_INIT_BLOCKS(inode->i_sb)+ - EXT3_MAXQUOTAS_DEL_BLOCKS(inode->i_sb)+3); - if (IS_ERR(handle)) { - error = PTR_ERR(handle); - goto err_out; - } - error = dquot_transfer(inode, attr); - if (error) { - ext3_journal_stop(handle); - return error; - } - /* Update corresponding info in inode so that everything is in - * one transaction */ - if (attr->ia_valid & ATTR_UID) - inode->i_uid = attr->ia_uid; - if (attr->ia_valid & ATTR_GID) - inode->i_gid = attr->ia_gid; - error = ext3_mark_inode_dirty(handle, inode); - ext3_journal_stop(handle); - } - - if (attr->ia_valid & ATTR_SIZE) - inode_dio_wait(inode); - - if (S_ISREG(inode->i_mode) && - attr->ia_valid & ATTR_SIZE && attr->ia_size < inode->i_size) { - handle_t *handle; - - handle = ext3_journal_start(inode, 3); - if (IS_ERR(handle)) { - error = PTR_ERR(handle); - goto err_out; - } - - error = ext3_orphan_add(handle, inode); - if (error) { - ext3_journal_stop(handle); - goto err_out; - } - EXT3_I(inode)->i_disksize = attr->ia_size; - error = ext3_mark_inode_dirty(handle, inode); - ext3_journal_stop(handle); - if (error) { - /* Some hard fs error must have happened. Bail out. */ - ext3_orphan_del(NULL, inode); - goto err_out; - } - rc = ext3_block_truncate_page(inode, attr->ia_size); - if (rc) { - /* Cleanup orphan list and exit */ - handle = ext3_journal_start(inode, 3); - if (IS_ERR(handle)) { - ext3_orphan_del(NULL, inode); - goto err_out; - } - ext3_orphan_del(handle, inode); - ext3_journal_stop(handle); - goto err_out; - } - } - - if ((attr->ia_valid & ATTR_SIZE) && - attr->ia_size != i_size_read(inode)) { - truncate_setsize(inode, attr->ia_size); - ext3_truncate(inode); - } - - setattr_copy(inode, attr); - mark_inode_dirty(inode); - - if (ia_valid & ATTR_MODE) - rc = posix_acl_chmod(inode, inode->i_mode); - -err_out: - ext3_std_error(inode->i_sb, error); - if (!error) - error = rc; - return error; -} - - -/* - * How many blocks doth make a writepage()? - * - * With N blocks per page, it may be: - * N data blocks - * 2 indirect block - * 2 dindirect - * 1 tindirect - * N+5 bitmap blocks (from the above) - * N+5 group descriptor summary blocks - * 1 inode block - * 1 superblock. - * 2 * EXT3_SINGLEDATA_TRANS_BLOCKS for the quote files - * - * 3 * (N + 5) + 2 + 2 * EXT3_SINGLEDATA_TRANS_BLOCKS - * - * With ordered or writeback data it's the same, less the N data blocks. - * - * If the inode's direct blocks can hold an integral number of pages then a - * page cannot straddle two indirect blocks, and we can only touch one indirect - * and dindirect block, and the "5" above becomes "3". - * - * This still overestimates under most circumstances. If we were to pass the - * start and end offsets in here as well we could do block_to_path() on each - * block and work out the exact number of indirects which are touched. Pah. - */ - -static int ext3_writepage_trans_blocks(struct inode *inode) -{ - int bpp = ext3_journal_blocks_per_page(inode); - int indirects = (EXT3_NDIR_BLOCKS % bpp) ? 5 : 3; - int ret; - - if (ext3_should_journal_data(inode)) - ret = 3 * (bpp + indirects) + 2; - else - ret = 2 * (bpp + indirects) + indirects + 2; - -#ifdef CONFIG_QUOTA - /* We know that structure was already allocated during dquot_initialize so - * we will be updating only the data blocks + inodes */ - ret += EXT3_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb); -#endif - - return ret; -} - -/* - * The caller must have previously called ext3_reserve_inode_write(). - * Give this, we know that the caller already has write access to iloc->bh. - */ -int ext3_mark_iloc_dirty(handle_t *handle, - struct inode *inode, struct ext3_iloc *iloc) -{ - int err = 0; - - /* the do_update_inode consumes one bh->b_count */ - get_bh(iloc->bh); - - /* ext3_do_update_inode() does journal_dirty_metadata */ - err = ext3_do_update_inode(handle, inode, iloc); - put_bh(iloc->bh); - return err; -} - -/* - * On success, We end up with an outstanding reference count against - * iloc->bh. This _must_ be cleaned up later. - */ - -int -ext3_reserve_inode_write(handle_t *handle, struct inode *inode, - struct ext3_iloc *iloc) -{ - int err = 0; - if (handle) { - err = ext3_get_inode_loc(inode, iloc); - if (!err) { - BUFFER_TRACE(iloc->bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, iloc->bh); - if (err) { - brelse(iloc->bh); - iloc->bh = NULL; - } - } - } - ext3_std_error(inode->i_sb, err); - return err; -} - -/* - * What we do here is to mark the in-core inode as clean with respect to inode - * dirtiness (it may still be data-dirty). - * This means that the in-core inode may be reaped by prune_icache - * without having to perform any I/O. This is a very good thing, - * because *any* task may call prune_icache - even ones which - * have a transaction open against a different journal. - * - * Is this cheating? Not really. Sure, we haven't written the - * inode out, but prune_icache isn't a user-visible syncing function. - * Whenever the user wants stuff synced (sys_sync, sys_msync, sys_fsync) - * we start and wait on commits. - */ -int ext3_mark_inode_dirty(handle_t *handle, struct inode *inode) -{ - struct ext3_iloc iloc; - int err; - - might_sleep(); - trace_ext3_mark_inode_dirty(inode, _RET_IP_); - err = ext3_reserve_inode_write(handle, inode, &iloc); - if (!err) - err = ext3_mark_iloc_dirty(handle, inode, &iloc); - return err; -} - -/* - * ext3_dirty_inode() is called from __mark_inode_dirty() - * - * We're really interested in the case where a file is being extended. - * i_size has been changed by generic_commit_write() and we thus need - * to include the updated inode in the current transaction. - * - * Also, dquot_alloc_space() will always dirty the inode when blocks - * are allocated to the file. - * - * If the inode is marked synchronous, we don't honour that here - doing - * so would cause a commit on atime updates, which we don't bother doing. - * We handle synchronous inodes at the highest possible level. - */ -void ext3_dirty_inode(struct inode *inode, int flags) -{ - handle_t *current_handle = ext3_journal_current_handle(); - handle_t *handle; - - handle = ext3_journal_start(inode, 2); - if (IS_ERR(handle)) - goto out; - if (current_handle && - current_handle->h_transaction != handle->h_transaction) { - /* This task has a transaction open against a different fs */ - printk(KERN_EMERG "%s: transactions do not match!\n", - __func__); - } else { - jbd_debug(5, "marking dirty. outer handle=%p\n", - current_handle); - ext3_mark_inode_dirty(handle, inode); - } - ext3_journal_stop(handle); -out: - return; -} - -#if 0 -/* - * Bind an inode's backing buffer_head into this transaction, to prevent - * it from being flushed to disk early. Unlike - * ext3_reserve_inode_write, this leaves behind no bh reference and - * returns no iloc structure, so the caller needs to repeat the iloc - * lookup to mark the inode dirty later. - */ -static int ext3_pin_inode(handle_t *handle, struct inode *inode) -{ - struct ext3_iloc iloc; - - int err = 0; - if (handle) { - err = ext3_get_inode_loc(inode, &iloc); - if (!err) { - BUFFER_TRACE(iloc.bh, "get_write_access"); - err = journal_get_write_access(handle, iloc.bh); - if (!err) - err = ext3_journal_dirty_metadata(handle, - iloc.bh); - brelse(iloc.bh); - } - } - ext3_std_error(inode->i_sb, err); - return err; -} -#endif - -int ext3_change_inode_journal_flag(struct inode *inode, int val) -{ - journal_t *journal; - handle_t *handle; - int err; - - /* - * We have to be very careful here: changing a data block's - * journaling status dynamically is dangerous. If we write a - * data block to the journal, change the status and then delete - * that block, we risk forgetting to revoke the old log record - * from the journal and so a subsequent replay can corrupt data. - * So, first we make sure that the journal is empty and that - * nobody is changing anything. - */ - - journal = EXT3_JOURNAL(inode); - if (is_journal_aborted(journal)) - return -EROFS; - - journal_lock_updates(journal); - journal_flush(journal); - - /* - * OK, there are no updates running now, and all cached data is - * synced to disk. We are now in a completely consistent state - * which doesn't have anything in the journal, and we know that - * no filesystem updates are running, so it is safe to modify - * the inode's in-core data-journaling state flag now. - */ - - if (val) - EXT3_I(inode)->i_flags |= EXT3_JOURNAL_DATA_FL; - else - EXT3_I(inode)->i_flags &= ~EXT3_JOURNAL_DATA_FL; - ext3_set_aops(inode); - - journal_unlock_updates(journal); - - /* Finally we can mark the inode as dirty. */ - - handle = ext3_journal_start(inode, 1); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - err = ext3_mark_inode_dirty(handle, inode); - handle->h_sync = 1; - ext3_journal_stop(handle); - ext3_std_error(inode->i_sb, err); - - return err; -} diff --git a/fs/ext3/ioctl.c b/fs/ext3/ioctl.c deleted file mode 100644 index 4d96e9a..0000000 --- a/fs/ext3/ioctl.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - * linux/fs/ext3/ioctl.c - * - * Copyright (C) 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - */ - -#include <linux/mount.h> -#include <linux/compat.h> -#include <asm/uaccess.h> -#include "ext3.h" - -long ext3_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) -{ - struct inode *inode = file_inode(filp); - struct ext3_inode_info *ei = EXT3_I(inode); - unsigned int flags; - unsigned short rsv_window_size; - - ext3_debug ("cmd = %u, arg = %lu\n", cmd, arg); - - switch (cmd) { - case EXT3_IOC_GETFLAGS: - ext3_get_inode_flags(ei); - flags = ei->i_flags & EXT3_FL_USER_VISIBLE; - return put_user(flags, (int __user *) arg); - case EXT3_IOC_SETFLAGS: { - handle_t *handle = NULL; - int err; - struct ext3_iloc iloc; - unsigned int oldflags; - unsigned int jflag; - - if (!inode_owner_or_capable(inode)) - return -EACCES; - - if (get_user(flags, (int __user *) arg)) - return -EFAULT; - - err = mnt_want_write_file(filp); - if (err) - return err; - - flags = ext3_mask_flags(inode->i_mode, flags); - - mutex_lock(&inode->i_mutex); - - /* Is it quota file? Do not allow user to mess with it */ - err = -EPERM; - if (IS_NOQUOTA(inode)) - goto flags_out; - - oldflags = ei->i_flags; - - /* The JOURNAL_DATA flag is modifiable only by root */ - jflag = flags & EXT3_JOURNAL_DATA_FL; - - /* - * The IMMUTABLE and APPEND_ONLY flags can only be changed by - * the relevant capability. - * - * This test looks nicer. Thanks to Pauline Middelink - */ - if ((flags ^ oldflags) & (EXT3_APPEND_FL | EXT3_IMMUTABLE_FL)) { - if (!capable(CAP_LINUX_IMMUTABLE)) - goto flags_out; - } - - /* - * The JOURNAL_DATA flag can only be changed by - * the relevant capability. - */ - if ((jflag ^ oldflags) & (EXT3_JOURNAL_DATA_FL)) { - if (!capable(CAP_SYS_RESOURCE)) - goto flags_out; - } - - handle = ext3_journal_start(inode, 1); - if (IS_ERR(handle)) { - err = PTR_ERR(handle); - goto flags_out; - } - if (IS_SYNC(inode)) - handle->h_sync = 1; - err = ext3_reserve_inode_write(handle, inode, &iloc); - if (err) - goto flags_err; - - flags = flags & EXT3_FL_USER_MODIFIABLE; - flags |= oldflags & ~EXT3_FL_USER_MODIFIABLE; - ei->i_flags = flags; - - ext3_set_inode_flags(inode); - inode->i_ctime = CURRENT_TIME_SEC; - - err = ext3_mark_iloc_dirty(handle, inode, &iloc); -flags_err: - ext3_journal_stop(handle); - if (err) - goto flags_out; - - if ((jflag ^ oldflags) & (EXT3_JOURNAL_DATA_FL)) - err = ext3_change_inode_journal_flag(inode, jflag); -flags_out: - mutex_unlock(&inode->i_mutex); - mnt_drop_write_file(filp); - return err; - } - case EXT3_IOC_GETVERSION: - case EXT3_IOC_GETVERSION_OLD: - return put_user(inode->i_generation, (int __user *) arg); - case EXT3_IOC_SETVERSION: - case EXT3_IOC_SETVERSION_OLD: { - handle_t *handle; - struct ext3_iloc iloc; - __u32 generation; - int err; - - if (!inode_owner_or_capable(inode)) - return -EPERM; - - err = mnt_want_write_file(filp); - if (err) - return err; - if (get_user(generation, (int __user *) arg)) { - err = -EFAULT; - goto setversion_out; - } - - mutex_lock(&inode->i_mutex); - handle = ext3_journal_start(inode, 1); - if (IS_ERR(handle)) { - err = PTR_ERR(handle); - goto unlock_out; - } - err = ext3_reserve_inode_write(handle, inode, &iloc); - if (err == 0) { - inode->i_ctime = CURRENT_TIME_SEC; - inode->i_generation = generation; - err = ext3_mark_iloc_dirty(handle, inode, &iloc); - } - ext3_journal_stop(handle); - -unlock_out: - mutex_unlock(&inode->i_mutex); -setversion_out: - mnt_drop_write_file(filp); - return err; - } - case EXT3_IOC_GETRSVSZ: - if (test_opt(inode->i_sb, RESERVATION) - && S_ISREG(inode->i_mode) - && ei->i_block_alloc_info) { - rsv_window_size = ei->i_block_alloc_info->rsv_window_node.rsv_goal_size; - return put_user(rsv_window_size, (int __user *)arg); - } - return -ENOTTY; - case EXT3_IOC_SETRSVSZ: { - int err; - - if (!test_opt(inode->i_sb, RESERVATION) ||!S_ISREG(inode->i_mode)) - return -ENOTTY; - - err = mnt_want_write_file(filp); - if (err) - return err; - - if (!inode_owner_or_capable(inode)) { - err = -EACCES; - goto setrsvsz_out; - } - - if (get_user(rsv_window_size, (int __user *)arg)) { - err = -EFAULT; - goto setrsvsz_out; - } - - if (rsv_window_size > EXT3_MAX_RESERVE_BLOCKS) - rsv_window_size = EXT3_MAX_RESERVE_BLOCKS; - - /* - * need to allocate reservation structure for this inode - * before set the window size - */ - mutex_lock(&ei->truncate_mutex); - if (!ei->i_block_alloc_info) - ext3_init_block_alloc_info(inode); - - if (ei->i_block_alloc_info){ - struct ext3_reserve_window_node *rsv = &ei->i_block_alloc_info->rsv_window_node; - rsv->rsv_goal_size = rsv_window_size; - } - mutex_unlock(&ei->truncate_mutex); -setrsvsz_out: - mnt_drop_write_file(filp); - return err; - } - case EXT3_IOC_GROUP_EXTEND: { - ext3_fsblk_t n_blocks_count; - struct super_block *sb = inode->i_sb; - int err, err2; - - if (!capable(CAP_SYS_RESOURCE)) - return -EPERM; - - err = mnt_want_write_file(filp); - if (err) - return err; - - if (get_user(n_blocks_count, (__u32 __user *)arg)) { - err = -EFAULT; - goto group_extend_out; - } - err = ext3_group_extend(sb, EXT3_SB(sb)->s_es, n_blocks_count); - journal_lock_updates(EXT3_SB(sb)->s_journal); - err2 = journal_flush(EXT3_SB(sb)->s_journal); - journal_unlock_updates(EXT3_SB(sb)->s_journal); - if (err == 0) - err = err2; -group_extend_out: - mnt_drop_write_file(filp); - return err; - } - case EXT3_IOC_GROUP_ADD: { - struct ext3_new_group_data input; - struct super_block *sb = inode->i_sb; - int err, err2; - - if (!capable(CAP_SYS_RESOURCE)) - return -EPERM; - - err = mnt_want_write_file(filp); - if (err) - return err; - - if (copy_from_user(&input, (struct ext3_new_group_input __user *)arg, - sizeof(input))) { - err = -EFAULT; - goto group_add_out; - } - - err = ext3_group_add(sb, &input); - journal_lock_updates(EXT3_SB(sb)->s_journal); - err2 = journal_flush(EXT3_SB(sb)->s_journal); - journal_unlock_updates(EXT3_SB(sb)->s_journal); - if (err == 0) - err = err2; -group_add_out: - mnt_drop_write_file(filp); - return err; - } - case FITRIM: { - - struct super_block *sb = inode->i_sb; - struct fstrim_range range; - int ret = 0; - - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - - if (copy_from_user(&range, (struct fstrim_range __user *)arg, - sizeof(range))) - return -EFAULT; - - ret = ext3_trim_fs(sb, &range); - if (ret < 0) - return ret; - - if (copy_to_user((struct fstrim_range __user *)arg, &range, - sizeof(range))) - return -EFAULT; - - return 0; - } - - default: - return -ENOTTY; - } -} - -#ifdef CONFIG_COMPAT -long ext3_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - /* These are just misnamed, they actually get/put from/to user an int */ - switch (cmd) { - case EXT3_IOC32_GETFLAGS: - cmd = EXT3_IOC_GETFLAGS; - break; - case EXT3_IOC32_SETFLAGS: - cmd = EXT3_IOC_SETFLAGS; - break; - case EXT3_IOC32_GETVERSION: - cmd = EXT3_IOC_GETVERSION; - break; - case EXT3_IOC32_SETVERSION: - cmd = EXT3_IOC_SETVERSION; - break; - case EXT3_IOC32_GROUP_EXTEND: - cmd = EXT3_IOC_GROUP_EXTEND; - break; - case EXT3_IOC32_GETVERSION_OLD: - cmd = EXT3_IOC_GETVERSION_OLD; - break; - case EXT3_IOC32_SETVERSION_OLD: - cmd = EXT3_IOC_SETVERSION_OLD; - break; -#ifdef CONFIG_JBD_DEBUG - case EXT3_IOC32_WAIT_FOR_READONLY: - cmd = EXT3_IOC_WAIT_FOR_READONLY; - break; -#endif - case EXT3_IOC32_GETRSVSZ: - cmd = EXT3_IOC_GETRSVSZ; - break; - case EXT3_IOC32_SETRSVSZ: - cmd = EXT3_IOC_SETRSVSZ; - break; - case EXT3_IOC_GROUP_ADD: - break; - default: - return -ENOIOCTLCMD; - } - return ext3_ioctl(file, cmd, (unsigned long) compat_ptr(arg)); -} -#endif diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c deleted file mode 100644 index c9e767c..0000000 --- a/fs/ext3/namei.c +++ /dev/null @@ -1,2586 +0,0 @@ -/* - * linux/fs/ext3/namei.c - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/fs/minix/namei.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * Big-endian to little-endian byte-swapping/bitmaps by - * David S. Miller (davem@caip.rutgers.edu), 1995 - * Directory entry file type support and forward compatibility hooks - * for B-tree directories by Theodore Ts'o (tytso@mit.edu), 1998 - * Hash Tree Directory indexing (c) - * Daniel Phillips, 2001 - * Hash Tree Directory indexing porting - * Christopher Li, 2002 - * Hash Tree Directory indexing cleanup - * Theodore Ts'o, 2002 - */ - -#include <linux/quotaops.h> -#include "ext3.h" -#include "namei.h" -#include "xattr.h" -#include "acl.h" - -/* - * define how far ahead to read directories while searching them. - */ -#define NAMEI_RA_CHUNKS 2 -#define NAMEI_RA_BLOCKS 4 -#define NAMEI_RA_SIZE (NAMEI_RA_CHUNKS * NAMEI_RA_BLOCKS) - -static struct buffer_head *ext3_append(handle_t *handle, - struct inode *inode, - u32 *block, int *err) -{ - struct buffer_head *bh; - - *block = inode->i_size >> inode->i_sb->s_blocksize_bits; - - if ((bh = ext3_dir_bread(handle, inode, *block, 1, err))) { - inode->i_size += inode->i_sb->s_blocksize; - EXT3_I(inode)->i_disksize = inode->i_size; - *err = ext3_journal_get_write_access(handle, bh); - if (*err) { - brelse(bh); - bh = NULL; - } - } - return bh; -} - -#ifndef assert -#define assert(test) J_ASSERT(test) -#endif - -#ifdef DX_DEBUG -#define dxtrace(command) command -#else -#define dxtrace(command) -#endif - -struct fake_dirent -{ - __le32 inode; - __le16 rec_len; - u8 name_len; - u8 file_type; -}; - -struct dx_countlimit -{ - __le16 limit; - __le16 count; -}; - -struct dx_entry -{ - __le32 hash; - __le32 block; -}; - -/* - * dx_root_info is laid out so that if it should somehow get overlaid by a - * dirent the two low bits of the hash version will be zero. Therefore, the - * hash version mod 4 should never be 0. Sincerely, the paranoia department. - */ - -struct dx_root -{ - struct fake_dirent dot; - char dot_name[4]; - struct fake_dirent dotdot; - char dotdot_name[4]; - struct dx_root_info - { - __le32 reserved_zero; - u8 hash_version; - u8 info_length; /* 8 */ - u8 indirect_levels; - u8 unused_flags; - } - info; - struct dx_entry entries[0]; -}; - -struct dx_node -{ - struct fake_dirent fake; - struct dx_entry entries[0]; -}; - - -struct dx_frame -{ - struct buffer_head *bh; - struct dx_entry *entries; - struct dx_entry *at; -}; - -struct dx_map_entry -{ - u32 hash; - u16 offs; - u16 size; -}; - -static inline unsigned dx_get_block (struct dx_entry *entry); -static void dx_set_block (struct dx_entry *entry, unsigned value); -static inline unsigned dx_get_hash (struct dx_entry *entry); -static void dx_set_hash (struct dx_entry *entry, unsigned value); -static unsigned dx_get_count (struct dx_entry *entries); -static unsigned dx_get_limit (struct dx_entry *entries); -static void dx_set_count (struct dx_entry *entries, unsigned value); -static void dx_set_limit (struct dx_entry *entries, unsigned value); -static unsigned dx_root_limit (struct inode *dir, unsigned infosize); -static unsigned dx_node_limit (struct inode *dir); -static struct dx_frame *dx_probe(struct qstr *entry, - struct inode *dir, - struct dx_hash_info *hinfo, - struct dx_frame *frame, - int *err); -static void dx_release (struct dx_frame *frames); -static int dx_make_map(struct ext3_dir_entry_2 *de, unsigned blocksize, - struct dx_hash_info *hinfo, struct dx_map_entry map[]); -static void dx_sort_map(struct dx_map_entry *map, unsigned count); -static struct ext3_dir_entry_2 *dx_move_dirents (char *from, char *to, - struct dx_map_entry *offsets, int count); -static struct ext3_dir_entry_2 *dx_pack_dirents(char *base, unsigned blocksize); -static void dx_insert_block (struct dx_frame *frame, u32 hash, u32 block); -static int ext3_htree_next_block(struct inode *dir, __u32 hash, - struct dx_frame *frame, - struct dx_frame *frames, - __u32 *start_hash); -static struct buffer_head * ext3_dx_find_entry(struct inode *dir, - struct qstr *entry, struct ext3_dir_entry_2 **res_dir, - int *err); -static int ext3_dx_add_entry(handle_t *handle, struct dentry *dentry, - struct inode *inode); - -/* - * p is at least 6 bytes before the end of page - */ -static inline struct ext3_dir_entry_2 * -ext3_next_entry(struct ext3_dir_entry_2 *p) -{ - return (struct ext3_dir_entry_2 *)((char *)p + - ext3_rec_len_from_disk(p->rec_len)); -} - -/* - * Future: use high four bits of block for coalesce-on-delete flags - * Mask them off for now. - */ - -static inline unsigned dx_get_block (struct dx_entry *entry) -{ - return le32_to_cpu(entry->block) & 0x00ffffff; -} - -static inline void dx_set_block (struct dx_entry *entry, unsigned value) -{ - entry->block = cpu_to_le32(value); -} - -static inline unsigned dx_get_hash (struct dx_entry *entry) -{ - return le32_to_cpu(entry->hash); -} - -static inline void dx_set_hash (struct dx_entry *entry, unsigned value) -{ - entry->hash = cpu_to_le32(value); -} - -static inline unsigned dx_get_count (struct dx_entry *entries) -{ - return le16_to_cpu(((struct dx_countlimit *) entries)->count); -} - -static inline unsigned dx_get_limit (struct dx_entry *entries) -{ - return le16_to_cpu(((struct dx_countlimit *) entries)->limit); -} - -static inline void dx_set_count (struct dx_entry *entries, unsigned value) -{ - ((struct dx_countlimit *) entries)->count = cpu_to_le16(value); -} - -static inline void dx_set_limit (struct dx_entry *entries, unsigned value) -{ - ((struct dx_countlimit *) entries)->limit = cpu_to_le16(value); -} - -static inline unsigned dx_root_limit (struct inode *dir, unsigned infosize) -{ - unsigned entry_space = dir->i_sb->s_blocksize - EXT3_DIR_REC_LEN(1) - - EXT3_DIR_REC_LEN(2) - infosize; - return entry_space / sizeof(struct dx_entry); -} - -static inline unsigned dx_node_limit (struct inode *dir) -{ - unsigned entry_space = dir->i_sb->s_blocksize - EXT3_DIR_REC_LEN(0); - return entry_space / sizeof(struct dx_entry); -} - -/* - * Debug - */ -#ifdef DX_DEBUG -static void dx_show_index (char * label, struct dx_entry *entries) -{ - int i, n = dx_get_count (entries); - printk("%s index ", label); - for (i = 0; i < n; i++) - { - printk("%x->%u ", i? dx_get_hash(entries + i): 0, dx_get_block(entries + i)); - } - printk("\n"); -} - -struct stats -{ - unsigned names; - unsigned space; - unsigned bcount; -}; - -static struct stats dx_show_leaf(struct dx_hash_info *hinfo, struct ext3_dir_entry_2 *de, - int size, int show_names) -{ - unsigned names = 0, space = 0; - char *base = (char *) de; - struct dx_hash_info h = *hinfo; - - printk("names: "); - while ((char *) de < base + size) - { - if (de->inode) - { - if (show_names) - { - int len = de->name_len; - char *name = de->name; - while (len--) printk("%c", *name++); - ext3fs_dirhash(de->name, de->name_len, &h); - printk(":%x.%u ", h.hash, - (unsigned) ((char *) de - base)); - } - space += EXT3_DIR_REC_LEN(de->name_len); - names++; - } - de = ext3_next_entry(de); - } - printk("(%i)\n", names); - return (struct stats) { names, space, 1 }; -} - -struct stats dx_show_entries(struct dx_hash_info *hinfo, struct inode *dir, - struct dx_entry *entries, int levels) -{ - unsigned blocksize = dir->i_sb->s_blocksize; - unsigned count = dx_get_count (entries), names = 0, space = 0, i; - unsigned bcount = 0; - struct buffer_head *bh; - int err; - printk("%i indexed blocks...\n", count); - for (i = 0; i < count; i++, entries++) - { - u32 block = dx_get_block(entries), hash = i? dx_get_hash(entries): 0; - u32 range = i < count - 1? (dx_get_hash(entries + 1) - hash): ~hash; - struct stats stats; - printk("%s%3u:%03u hash %8x/%8x ",levels?"":" ", i, block, hash, range); - if (!(bh = ext3_bread (NULL,dir, block, 0,&err))) continue; - stats = levels? - dx_show_entries(hinfo, dir, ((struct dx_node *) bh->b_data)->entries, levels - 1): - dx_show_leaf(hinfo, (struct ext3_dir_entry_2 *) bh->b_data, blocksize, 0); - names += stats.names; - space += stats.space; - bcount += stats.bcount; - brelse (bh); - } - if (bcount) - printk("%snames %u, fullness %u (%u%%)\n", levels?"":" ", - names, space/bcount,(space/bcount)*100/blocksize); - return (struct stats) { names, space, bcount}; -} -#endif /* DX_DEBUG */ - -/* - * Probe for a directory leaf block to search. - * - * dx_probe can return ERR_BAD_DX_DIR, which means there was a format - * error in the directory index, and the caller should fall back to - * searching the directory normally. The callers of dx_probe **MUST** - * check for this error code, and make sure it never gets reflected - * back to userspace. - */ -static struct dx_frame * -dx_probe(struct qstr *entry, struct inode *dir, - struct dx_hash_info *hinfo, struct dx_frame *frame_in, int *err) -{ - unsigned count, indirect; - struct dx_entry *at, *entries, *p, *q, *m; - struct dx_root *root; - struct buffer_head *bh; - struct dx_frame *frame = frame_in; - u32 hash; - - frame->bh = NULL; - if (!(bh = ext3_dir_bread(NULL, dir, 0, 0, err))) { - *err = ERR_BAD_DX_DIR; - goto fail; - } - root = (struct dx_root *) bh->b_data; - if (root->info.hash_version != DX_HASH_TEA && - root->info.hash_version != DX_HASH_HALF_MD4 && - root->info.hash_version != DX_HASH_LEGACY) { - ext3_warning(dir->i_sb, __func__, - "Unrecognised inode hash code %d", - root->info.hash_version); - brelse(bh); - *err = ERR_BAD_DX_DIR; - goto fail; - } - hinfo->hash_version = root->info.hash_version; - if (hinfo->hash_version <= DX_HASH_TEA) - hinfo->hash_version += EXT3_SB(dir->i_sb)->s_hash_unsigned; - hinfo->seed = EXT3_SB(dir->i_sb)->s_hash_seed; - if (entry) - ext3fs_dirhash(entry->name, entry->len, hinfo); - hash = hinfo->hash; - - if (root->info.unused_flags & 1) { - ext3_warning(dir->i_sb, __func__, - "Unimplemented inode hash flags: %#06x", - root->info.unused_flags); - brelse(bh); - *err = ERR_BAD_DX_DIR; - goto fail; - } - - if ((indirect = root->info.indirect_levels) > 1) { - ext3_warning(dir->i_sb, __func__, - "Unimplemented inode hash depth: %#06x", - root->info.indirect_levels); - brelse(bh); - *err = ERR_BAD_DX_DIR; - goto fail; - } - - entries = (struct dx_entry *) (((char *)&root->info) + - root->info.info_length); - - if (dx_get_limit(entries) != dx_root_limit(dir, - root->info.info_length)) { - ext3_warning(dir->i_sb, __func__, - "dx entry: limit != root limit"); - brelse(bh); - *err = ERR_BAD_DX_DIR; - goto fail; - } - - dxtrace (printk("Look up %x", hash)); - while (1) - { - count = dx_get_count(entries); - if (!count || count > dx_get_limit(entries)) { - ext3_warning(dir->i_sb, __func__, - "dx entry: no count or count > limit"); - brelse(bh); - *err = ERR_BAD_DX_DIR; - goto fail2; - } - - p = entries + 1; - q = entries + count - 1; - while (p <= q) - { - m = p + (q - p)/2; - dxtrace(printk(".")); - if (dx_get_hash(m) > hash) - q = m - 1; - else - p = m + 1; - } - - if (0) // linear search cross check - { - unsigned n = count - 1; - at = entries; - while (n--) - { - dxtrace(printk(",")); - if (dx_get_hash(++at) > hash) - { - at--; - break; - } - } - assert (at == p - 1); - } - - at = p - 1; - dxtrace(printk(" %x->%u\n", at == entries? 0: dx_get_hash(at), dx_get_block(at))); - frame->bh = bh; - frame->entries = entries; - frame->at = at; - if (!indirect--) return frame; - if (!(bh = ext3_dir_bread(NULL, dir, dx_get_block(at), 0, err))) { - *err = ERR_BAD_DX_DIR; - goto fail2; - } - at = entries = ((struct dx_node *) bh->b_data)->entries; - if (dx_get_limit(entries) != dx_node_limit (dir)) { - ext3_warning(dir->i_sb, __func__, - "dx entry: limit != node limit"); - brelse(bh); - *err = ERR_BAD_DX_DIR; - goto fail2; - } - frame++; - frame->bh = NULL; - } -fail2: - while (frame >= frame_in) { - brelse(frame->bh); - frame--; - } -fail: - if (*err == ERR_BAD_DX_DIR) - ext3_warning(dir->i_sb, __func__, - "Corrupt dir inode %ld, running e2fsck is " - "recommended.", dir->i_ino); - return NULL; -} - -static void dx_release (struct dx_frame *frames) -{ - if (frames[0].bh == NULL) - return; - - if (((struct dx_root *) frames[0].bh->b_data)->info.indirect_levels) - brelse(frames[1].bh); - brelse(frames[0].bh); -} - -/* - * This function increments the frame pointer to search the next leaf - * block, and reads in the necessary intervening nodes if the search - * should be necessary. Whether or not the search is necessary is - * controlled by the hash parameter. If the hash value is even, then - * the search is only continued if the next block starts with that - * hash value. This is used if we are searching for a specific file. - * - * If the hash value is HASH_NB_ALWAYS, then always go to the next block. - * - * This function returns 1 if the caller should continue to search, - * or 0 if it should not. If there is an error reading one of the - * index blocks, it will a negative error code. - * - * If start_hash is non-null, it will be filled in with the starting - * hash of the next page. - */ -static int ext3_htree_next_block(struct inode *dir, __u32 hash, - struct dx_frame *frame, - struct dx_frame *frames, - __u32 *start_hash) -{ - struct dx_frame *p; - struct buffer_head *bh; - int err, num_frames = 0; - __u32 bhash; - - p = frame; - /* - * Find the next leaf page by incrementing the frame pointer. - * If we run out of entries in the interior node, loop around and - * increment pointer in the parent node. When we break out of - * this loop, num_frames indicates the number of interior - * nodes need to be read. - */ - while (1) { - if (++(p->at) < p->entries + dx_get_count(p->entries)) - break; - if (p == frames) - return 0; - num_frames++; - p--; - } - - /* - * If the hash is 1, then continue only if the next page has a - * continuation hash of any value. This is used for readdir - * handling. Otherwise, check to see if the hash matches the - * desired contiuation hash. If it doesn't, return since - * there's no point to read in the successive index pages. - */ - bhash = dx_get_hash(p->at); - if (start_hash) - *start_hash = bhash; - if ((hash & 1) == 0) { - if ((bhash & ~1) != hash) - return 0; - } - /* - * If the hash is HASH_NB_ALWAYS, we always go to the next - * block so no check is necessary - */ - while (num_frames--) { - if (!(bh = ext3_dir_bread(NULL, dir, dx_get_block(p->at), - 0, &err))) - return err; /* Failure */ - p++; - brelse (p->bh); - p->bh = bh; - p->at = p->entries = ((struct dx_node *) bh->b_data)->entries; - } - return 1; -} - - -/* - * This function fills a red-black tree with information from a - * directory block. It returns the number directory entries loaded - * into the tree. If there is an error it is returned in err. - */ -static int htree_dirblock_to_tree(struct file *dir_file, - struct inode *dir, int block, - struct dx_hash_info *hinfo, - __u32 start_hash, __u32 start_minor_hash) -{ - struct buffer_head *bh; - struct ext3_dir_entry_2 *de, *top; - int err = 0, count = 0; - - dxtrace(printk("In htree dirblock_to_tree: block %d\n", block)); - - if (!(bh = ext3_dir_bread(NULL, dir, block, 0, &err))) - return err; - - de = (struct ext3_dir_entry_2 *) bh->b_data; - top = (struct ext3_dir_entry_2 *) ((char *) de + - dir->i_sb->s_blocksize - - EXT3_DIR_REC_LEN(0)); - for (; de < top; de = ext3_next_entry(de)) { - if (!ext3_check_dir_entry("htree_dirblock_to_tree", dir, de, bh, - (block<<EXT3_BLOCK_SIZE_BITS(dir->i_sb)) - +((char *)de - bh->b_data))) { - /* silently ignore the rest of the block */ - break; - } - ext3fs_dirhash(de->name, de->name_len, hinfo); - if ((hinfo->hash < start_hash) || - ((hinfo->hash == start_hash) && - (hinfo->minor_hash < start_minor_hash))) - continue; - if (de->inode == 0) - continue; - if ((err = ext3_htree_store_dirent(dir_file, - hinfo->hash, hinfo->minor_hash, de)) != 0) { - brelse(bh); - return err; - } - count++; - } - brelse(bh); - return count; -} - - -/* - * This function fills a red-black tree with information from a - * directory. We start scanning the directory in hash order, starting - * at start_hash and start_minor_hash. - * - * This function returns the number of entries inserted into the tree, - * or a negative error code. - */ -int ext3_htree_fill_tree(struct file *dir_file, __u32 start_hash, - __u32 start_minor_hash, __u32 *next_hash) -{ - struct dx_hash_info hinfo; - struct ext3_dir_entry_2 *de; - struct dx_frame frames[2], *frame; - struct inode *dir; - int block, err; - int count = 0; - int ret; - __u32 hashval; - - dxtrace(printk("In htree_fill_tree, start hash: %x:%x\n", start_hash, - start_minor_hash)); - dir = file_inode(dir_file); - if (!(EXT3_I(dir)->i_flags & EXT3_INDEX_FL)) { - hinfo.hash_version = EXT3_SB(dir->i_sb)->s_def_hash_version; - if (hinfo.hash_version <= DX_HASH_TEA) - hinfo.hash_version += - EXT3_SB(dir->i_sb)->s_hash_unsigned; - hinfo.seed = EXT3_SB(dir->i_sb)->s_hash_seed; - count = htree_dirblock_to_tree(dir_file, dir, 0, &hinfo, - start_hash, start_minor_hash); - *next_hash = ~0; - return count; - } - hinfo.hash = start_hash; - hinfo.minor_hash = 0; - frame = dx_probe(NULL, file_inode(dir_file), &hinfo, frames, &err); - if (!frame) - return err; - - /* Add '.' and '..' from the htree header */ - if (!start_hash && !start_minor_hash) { - de = (struct ext3_dir_entry_2 *) frames[0].bh->b_data; - if ((err = ext3_htree_store_dirent(dir_file, 0, 0, de)) != 0) - goto errout; - count++; - } - if (start_hash < 2 || (start_hash ==2 && start_minor_hash==0)) { - de = (struct ext3_dir_entry_2 *) frames[0].bh->b_data; - de = ext3_next_entry(de); - if ((err = ext3_htree_store_dirent(dir_file, 2, 0, de)) != 0) - goto errout; - count++; - } - - while (1) { - block = dx_get_block(frame->at); - ret = htree_dirblock_to_tree(dir_file, dir, block, &hinfo, - start_hash, start_minor_hash); - if (ret < 0) { - err = ret; - goto errout; - } - count += ret; - hashval = ~0; - ret = ext3_htree_next_block(dir, HASH_NB_ALWAYS, - frame, frames, &hashval); - *next_hash = hashval; - if (ret < 0) { - err = ret; - goto errout; - } - /* - * Stop if: (a) there are no more entries, or - * (b) we have inserted at least one entry and the - * next hash value is not a continuation - */ - if ((ret == 0) || - (count && ((hashval & 1) == 0))) - break; - } - dx_release(frames); - dxtrace(printk("Fill tree: returned %d entries, next hash: %x\n", - count, *next_hash)); - return count; -errout: - dx_release(frames); - return (err); -} - - -/* - * Directory block splitting, compacting - */ - -/* - * Create map of hash values, offsets, and sizes, stored at end of block. - * Returns number of entries mapped. - */ -static int dx_make_map(struct ext3_dir_entry_2 *de, unsigned blocksize, - struct dx_hash_info *hinfo, struct dx_map_entry *map_tail) -{ - int count = 0; - char *base = (char *) de; - struct dx_hash_info h = *hinfo; - - while ((char *) de < base + blocksize) - { - if (de->name_len && de->inode) { - ext3fs_dirhash(de->name, de->name_len, &h); - map_tail--; - map_tail->hash = h.hash; - map_tail->offs = (u16) ((char *) de - base); - map_tail->size = le16_to_cpu(de->rec_len); - count++; - cond_resched(); - } - /* XXX: do we need to check rec_len == 0 case? -Chris */ - de = ext3_next_entry(de); - } - return count; -} - -/* Sort map by hash value */ -static void dx_sort_map (struct dx_map_entry *map, unsigned count) -{ - struct dx_map_entry *p, *q, *top = map + count - 1; - int more; - /* Combsort until bubble sort doesn't suck */ - while (count > 2) - { - count = count*10/13; - if (count - 9 < 2) /* 9, 10 -> 11 */ - count = 11; - for (p = top, q = p - count; q >= map; p--, q--) - if (p->hash < q->hash) - swap(*p, *q); - } - /* Garden variety bubble sort */ - do { - more = 0; - q = top; - while (q-- > map) - { - if (q[1].hash >= q[0].hash) - continue; - swap(*(q+1), *q); - more = 1; - } - } while(more); -} - -static void dx_insert_block(struct dx_frame *frame, u32 hash, u32 block) -{ - struct dx_entry *entries = frame->entries; - struct dx_entry *old = frame->at, *new = old + 1; - int count = dx_get_count(entries); - - assert(count < dx_get_limit(entries)); - assert(old < entries + count); - memmove(new + 1, new, (char *)(entries + count) - (char *)(new)); - dx_set_hash(new, hash); - dx_set_block(new, block); - dx_set_count(entries, count + 1); -} - -static void ext3_update_dx_flag(struct inode *inode) -{ - if (!EXT3_HAS_COMPAT_FEATURE(inode->i_sb, - EXT3_FEATURE_COMPAT_DIR_INDEX)) - EXT3_I(inode)->i_flags &= ~EXT3_INDEX_FL; -} - -/* - * NOTE! unlike strncmp, ext3_match returns 1 for success, 0 for failure. - * - * `len <= EXT3_NAME_LEN' is guaranteed by caller. - * `de != NULL' is guaranteed by caller. - */ -static inline int ext3_match (int len, const char * const name, - struct ext3_dir_entry_2 * de) -{ - if (len != de->name_len) - return 0; - if (!de->inode) - return 0; - return !memcmp(name, de->name, len); -} - -/* - * Returns 0 if not found, -1 on failure, and 1 on success - */ -static inline int search_dirblock(struct buffer_head * bh, - struct inode *dir, - struct qstr *child, - unsigned long offset, - struct ext3_dir_entry_2 ** res_dir) -{ - struct ext3_dir_entry_2 * de; - char * dlimit; - int de_len; - const char *name = child->name; - int namelen = child->len; - - de = (struct ext3_dir_entry_2 *) bh->b_data; - dlimit = bh->b_data + dir->i_sb->s_blocksize; - while ((char *) de < dlimit) { - /* this code is executed quadratically often */ - /* do minimal checking `by hand' */ - - if ((char *) de + namelen <= dlimit && - ext3_match (namelen, name, de)) { - /* found a match - just to be sure, do a full check */ - if (!ext3_check_dir_entry("ext3_find_entry", - dir, de, bh, offset)) - return -1; - *res_dir = de; - return 1; - } - /* prevent looping on a bad block */ - de_len = ext3_rec_len_from_disk(de->rec_len); - if (de_len <= 0) - return -1; - offset += de_len; - de = (struct ext3_dir_entry_2 *) ((char *) de + de_len); - } - return 0; -} - - -/* - * ext3_find_entry() - * - * finds an entry in the specified directory with the wanted name. It - * returns the cache buffer in which the entry was found, and the entry - * itself (as a parameter - res_dir). It does NOT read the inode of the - * entry - you'll have to do that yourself if you want to. - * - * The returned buffer_head has ->b_count elevated. The caller is expected - * to brelse() it when appropriate. - */ -static struct buffer_head *ext3_find_entry(struct inode *dir, - struct qstr *entry, - struct ext3_dir_entry_2 **res_dir) -{ - struct super_block * sb; - struct buffer_head * bh_use[NAMEI_RA_SIZE]; - struct buffer_head * bh, *ret = NULL; - unsigned long start, block, b; - const u8 *name = entry->name; - int ra_max = 0; /* Number of bh's in the readahead - buffer, bh_use[] */ - int ra_ptr = 0; /* Current index into readahead - buffer */ - int num = 0; - int nblocks, i, err; - int namelen; - - *res_dir = NULL; - sb = dir->i_sb; - namelen = entry->len; - if (namelen > EXT3_NAME_LEN) - return NULL; - if ((namelen <= 2) && (name[0] == '.') && - (name[1] == '.' || name[1] == 0)) { - /* - * "." or ".." will only be in the first block - * NFS may look up ".."; "." should be handled by the VFS - */ - block = start = 0; - nblocks = 1; - goto restart; - } - if (is_dx(dir)) { - bh = ext3_dx_find_entry(dir, entry, res_dir, &err); - /* - * On success, or if the error was file not found, - * return. Otherwise, fall back to doing a search the - * old fashioned way. - */ - if (bh || (err != ERR_BAD_DX_DIR)) - return bh; - dxtrace(printk("ext3_find_entry: dx failed, falling back\n")); - } - nblocks = dir->i_size >> EXT3_BLOCK_SIZE_BITS(sb); - start = EXT3_I(dir)->i_dir_start_lookup; - if (start >= nblocks) - start = 0; - block = start; -restart: - do { - /* - * We deal with the read-ahead logic here. - */ - if (ra_ptr >= ra_max) { - /* Refill the readahead buffer */ - ra_ptr = 0; - b = block; - for (ra_max = 0; ra_max < NAMEI_RA_SIZE; ra_max++) { - /* - * Terminate if we reach the end of the - * directory and must wrap, or if our - * search has finished at this block. - */ - if (b >= nblocks || (num && block == start)) { - bh_use[ra_max] = NULL; - break; - } - num++; - bh = ext3_getblk(NULL, dir, b++, 0, &err); - bh_use[ra_max] = bh; - if (bh && !bh_uptodate_or_lock(bh)) { - get_bh(bh); - bh->b_end_io = end_buffer_read_sync; - submit_bh(READ | REQ_META | REQ_PRIO, - bh); - } - } - } - if ((bh = bh_use[ra_ptr++]) == NULL) - goto next; - wait_on_buffer(bh); - if (!buffer_uptodate(bh)) { - /* read error, skip block & hope for the best */ - ext3_error(sb, __func__, "reading directory #%lu " - "offset %lu", dir->i_ino, block); - brelse(bh); - goto next; - } - i = search_dirblock(bh, dir, entry, - block << EXT3_BLOCK_SIZE_BITS(sb), res_dir); - if (i == 1) { - EXT3_I(dir)->i_dir_start_lookup = block; - ret = bh; - goto cleanup_and_exit; - } else { - brelse(bh); - if (i < 0) - goto cleanup_and_exit; - } - next: - if (++block >= nblocks) - block = 0; - } while (block != start); - - /* - * If the directory has grown while we were searching, then - * search the last part of the directory before giving up. - */ - block = nblocks; - nblocks = dir->i_size >> EXT3_BLOCK_SIZE_BITS(sb); - if (block < nblocks) { - start = 0; - goto restart; - } - -cleanup_and_exit: - /* Clean up the read-ahead blocks */ - for (; ra_ptr < ra_max; ra_ptr++) - brelse (bh_use[ra_ptr]); - return ret; -} - -static struct buffer_head * ext3_dx_find_entry(struct inode *dir, - struct qstr *entry, struct ext3_dir_entry_2 **res_dir, - int *err) -{ - struct super_block *sb = dir->i_sb; - struct dx_hash_info hinfo; - struct dx_frame frames[2], *frame; - struct buffer_head *bh; - unsigned long block; - int retval; - - if (!(frame = dx_probe(entry, dir, &hinfo, frames, err))) - return NULL; - do { - block = dx_get_block(frame->at); - if (!(bh = ext3_dir_bread (NULL, dir, block, 0, err))) - goto errout; - - retval = search_dirblock(bh, dir, entry, - block << EXT3_BLOCK_SIZE_BITS(sb), - res_dir); - if (retval == 1) { - dx_release(frames); - return bh; - } - brelse(bh); - if (retval == -1) { - *err = ERR_BAD_DX_DIR; - goto errout; - } - - /* Check to see if we should continue to search */ - retval = ext3_htree_next_block(dir, hinfo.hash, frame, - frames, NULL); - if (retval < 0) { - ext3_warning(sb, __func__, - "error reading index page in directory #%lu", - dir->i_ino); - *err = retval; - goto errout; - } - } while (retval == 1); - - *err = -ENOENT; -errout: - dxtrace(printk("%s not found\n", entry->name)); - dx_release (frames); - return NULL; -} - -static struct dentry *ext3_lookup(struct inode * dir, struct dentry *dentry, unsigned int flags) -{ - struct inode * inode; - struct ext3_dir_entry_2 * de; - struct buffer_head * bh; - - if (dentry->d_name.len > EXT3_NAME_LEN) - return ERR_PTR(-ENAMETOOLONG); - - bh = ext3_find_entry(dir, &dentry->d_name, &de); - inode = NULL; - if (bh) { - unsigned long ino = le32_to_cpu(de->inode); - brelse (bh); - if (!ext3_valid_inum(dir->i_sb, ino)) { - ext3_error(dir->i_sb, "ext3_lookup", - "bad inode number: %lu", ino); - return ERR_PTR(-EIO); - } - inode = ext3_iget(dir->i_sb, ino); - if (inode == ERR_PTR(-ESTALE)) { - ext3_error(dir->i_sb, __func__, - "deleted inode referenced: %lu", - ino); - return ERR_PTR(-EIO); - } - } - return d_splice_alias(inode, dentry); -} - - -struct dentry *ext3_get_parent(struct dentry *child) -{ - unsigned long ino; - struct qstr dotdot = QSTR_INIT("..", 2); - struct ext3_dir_entry_2 * de; - struct buffer_head *bh; - - bh = ext3_find_entry(d_inode(child), &dotdot, &de); - if (!bh) - return ERR_PTR(-ENOENT); - ino = le32_to_cpu(de->inode); - brelse(bh); - - if (!ext3_valid_inum(d_inode(child)->i_sb, ino)) { - ext3_error(d_inode(child)->i_sb, "ext3_get_parent", - "bad inode number: %lu", ino); - return ERR_PTR(-EIO); - } - - return d_obtain_alias(ext3_iget(d_inode(child)->i_sb, ino)); -} - -#define S_SHIFT 12 -static unsigned char ext3_type_by_mode[S_IFMT >> S_SHIFT] = { - [S_IFREG >> S_SHIFT] = EXT3_FT_REG_FILE, - [S_IFDIR >> S_SHIFT] = EXT3_FT_DIR, - [S_IFCHR >> S_SHIFT] = EXT3_FT_CHRDEV, - [S_IFBLK >> S_SHIFT] = EXT3_FT_BLKDEV, - [S_IFIFO >> S_SHIFT] = EXT3_FT_FIFO, - [S_IFSOCK >> S_SHIFT] = EXT3_FT_SOCK, - [S_IFLNK >> S_SHIFT] = EXT3_FT_SYMLINK, -}; - -static inline void ext3_set_de_type(struct super_block *sb, - struct ext3_dir_entry_2 *de, - umode_t mode) { - if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_FILETYPE)) - de->file_type = ext3_type_by_mode[(mode & S_IFMT)>>S_SHIFT]; -} - -/* - * Move count entries from end of map between two memory locations. - * Returns pointer to last entry moved. - */ -static struct ext3_dir_entry_2 * -dx_move_dirents(char *from, char *to, struct dx_map_entry *map, int count) -{ - unsigned rec_len = 0; - - while (count--) { - struct ext3_dir_entry_2 *de = (struct ext3_dir_entry_2 *) (from + map->offs); - rec_len = EXT3_DIR_REC_LEN(de->name_len); - memcpy (to, de, rec_len); - ((struct ext3_dir_entry_2 *) to)->rec_len = - ext3_rec_len_to_disk(rec_len); - de->inode = 0; - map++; - to += rec_len; - } - return (struct ext3_dir_entry_2 *) (to - rec_len); -} - -/* - * Compact each dir entry in the range to the minimal rec_len. - * Returns pointer to last entry in range. - */ -static struct ext3_dir_entry_2 *dx_pack_dirents(char *base, unsigned blocksize) -{ - struct ext3_dir_entry_2 *next, *to, *prev; - struct ext3_dir_entry_2 *de = (struct ext3_dir_entry_2 *)base; - unsigned rec_len = 0; - - prev = to = de; - while ((char *)de < base + blocksize) { - next = ext3_next_entry(de); - if (de->inode && de->name_len) { - rec_len = EXT3_DIR_REC_LEN(de->name_len); - if (de > to) - memmove(to, de, rec_len); - to->rec_len = ext3_rec_len_to_disk(rec_len); - prev = to; - to = (struct ext3_dir_entry_2 *) (((char *) to) + rec_len); - } - de = next; - } - return prev; -} - -/* - * Split a full leaf block to make room for a new dir entry. - * Allocate a new block, and move entries so that they are approx. equally full. - * Returns pointer to de in block into which the new entry will be inserted. - */ -static struct ext3_dir_entry_2 *do_split(handle_t *handle, struct inode *dir, - struct buffer_head **bh,struct dx_frame *frame, - struct dx_hash_info *hinfo, int *error) -{ - unsigned blocksize = dir->i_sb->s_blocksize; - unsigned count, continued; - struct buffer_head *bh2; - u32 newblock; - u32 hash2; - struct dx_map_entry *map; - char *data1 = (*bh)->b_data, *data2; - unsigned split, move, size; - struct ext3_dir_entry_2 *de = NULL, *de2; - int err = 0, i; - - bh2 = ext3_append (handle, dir, &newblock, &err); - if (!(bh2)) { - brelse(*bh); - *bh = NULL; - goto errout; - } - - BUFFER_TRACE(*bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, *bh); - if (err) - goto journal_error; - - BUFFER_TRACE(frame->bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, frame->bh); - if (err) - goto journal_error; - - data2 = bh2->b_data; - - /* create map in the end of data2 block */ - map = (struct dx_map_entry *) (data2 + blocksize); - count = dx_make_map ((struct ext3_dir_entry_2 *) data1, - blocksize, hinfo, map); - map -= count; - dx_sort_map (map, count); - /* Split the existing block in the middle, size-wise */ - size = 0; - move = 0; - for (i = count-1; i >= 0; i--) { - /* is more than half of this entry in 2nd half of the block? */ - if (size + map[i].size/2 > blocksize/2) - break; - size += map[i].size; - move++; - } - /* map index at which we will split */ - split = count - move; - hash2 = map[split].hash; - continued = hash2 == map[split - 1].hash; - dxtrace(printk("Split block %i at %x, %i/%i\n", - dx_get_block(frame->at), hash2, split, count-split)); - - /* Fancy dance to stay within two buffers */ - de2 = dx_move_dirents(data1, data2, map + split, count - split); - de = dx_pack_dirents(data1,blocksize); - de->rec_len = ext3_rec_len_to_disk(data1 + blocksize - (char *) de); - de2->rec_len = ext3_rec_len_to_disk(data2 + blocksize - (char *) de2); - dxtrace(dx_show_leaf (hinfo, (struct ext3_dir_entry_2 *) data1, blocksize, 1)); - dxtrace(dx_show_leaf (hinfo, (struct ext3_dir_entry_2 *) data2, blocksize, 1)); - - /* Which block gets the new entry? */ - if (hinfo->hash >= hash2) - { - swap(*bh, bh2); - de = de2; - } - dx_insert_block (frame, hash2 + continued, newblock); - err = ext3_journal_dirty_metadata (handle, bh2); - if (err) - goto journal_error; - err = ext3_journal_dirty_metadata (handle, frame->bh); - if (err) - goto journal_error; - brelse (bh2); - dxtrace(dx_show_index ("frame", frame->entries)); - return de; - -journal_error: - brelse(*bh); - brelse(bh2); - *bh = NULL; - ext3_std_error(dir->i_sb, err); -errout: - *error = err; - return NULL; -} - - -/* - * Add a new entry into a directory (leaf) block. If de is non-NULL, - * it points to a directory entry which is guaranteed to be large - * enough for new directory entry. If de is NULL, then - * add_dirent_to_buf will attempt search the directory block for - * space. It will return -ENOSPC if no space is available, and -EIO - * and -EEXIST if directory entry already exists. - * - * NOTE! bh is NOT released in the case where ENOSPC is returned. In - * all other cases bh is released. - */ -static int add_dirent_to_buf(handle_t *handle, struct dentry *dentry, - struct inode *inode, struct ext3_dir_entry_2 *de, - struct buffer_head * bh) -{ - struct inode *dir = d_inode(dentry->d_parent); - const char *name = dentry->d_name.name; - int namelen = dentry->d_name.len; - unsigned long offset = 0; - unsigned short reclen; - int nlen, rlen, err; - char *top; - - reclen = EXT3_DIR_REC_LEN(namelen); - if (!de) { - de = (struct ext3_dir_entry_2 *)bh->b_data; - top = bh->b_data + dir->i_sb->s_blocksize - reclen; - while ((char *) de <= top) { - if (!ext3_check_dir_entry("ext3_add_entry", dir, de, - bh, offset)) { - brelse (bh); - return -EIO; - } - if (ext3_match (namelen, name, de)) { - brelse (bh); - return -EEXIST; - } - nlen = EXT3_DIR_REC_LEN(de->name_len); - rlen = ext3_rec_len_from_disk(de->rec_len); - if ((de->inode? rlen - nlen: rlen) >= reclen) - break; - de = (struct ext3_dir_entry_2 *)((char *)de + rlen); - offset += rlen; - } - if ((char *) de > top) - return -ENOSPC; - } - BUFFER_TRACE(bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, bh); - if (err) { - ext3_std_error(dir->i_sb, err); - brelse(bh); - return err; - } - - /* By now the buffer is marked for journaling */ - nlen = EXT3_DIR_REC_LEN(de->name_len); - rlen = ext3_rec_len_from_disk(de->rec_len); - if (de->inode) { - struct ext3_dir_entry_2 *de1 = (struct ext3_dir_entry_2 *)((char *)de + nlen); - de1->rec_len = ext3_rec_len_to_disk(rlen - nlen); - de->rec_len = ext3_rec_len_to_disk(nlen); - de = de1; - } - de->file_type = EXT3_FT_UNKNOWN; - if (inode) { - de->inode = cpu_to_le32(inode->i_ino); - ext3_set_de_type(dir->i_sb, de, inode->i_mode); - } else - de->inode = 0; - de->name_len = namelen; - memcpy (de->name, name, namelen); - /* - * XXX shouldn't update any times until successful - * completion of syscall, but too many callers depend - * on this. - * - * XXX similarly, too many callers depend on - * ext3_new_inode() setting the times, but error - * recovery deletes the inode, so the worst that can - * happen is that the times are slightly out of date - * and/or different from the directory change time. - */ - dir->i_mtime = dir->i_ctime = CURRENT_TIME_SEC; - ext3_update_dx_flag(dir); - dir->i_version++; - ext3_mark_inode_dirty(handle, dir); - BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, bh); - if (err) - ext3_std_error(dir->i_sb, err); - brelse(bh); - return 0; -} - -/* - * This converts a one block unindexed directory to a 3 block indexed - * directory, and adds the dentry to the indexed directory. - */ -static int make_indexed_dir(handle_t *handle, struct dentry *dentry, - struct inode *inode, struct buffer_head *bh) -{ - struct inode *dir = d_inode(dentry->d_parent); - const char *name = dentry->d_name.name; - int namelen = dentry->d_name.len; - struct buffer_head *bh2; - struct dx_root *root; - struct dx_frame frames[2], *frame; - struct dx_entry *entries; - struct ext3_dir_entry_2 *de, *de2; - char *data1, *top; - unsigned len; - int retval; - unsigned blocksize; - struct dx_hash_info hinfo; - u32 block; - struct fake_dirent *fde; - - blocksize = dir->i_sb->s_blocksize; - dxtrace(printk(KERN_DEBUG "Creating index: inode %lu\n", dir->i_ino)); - retval = ext3_journal_get_write_access(handle, bh); - if (retval) { - ext3_std_error(dir->i_sb, retval); - brelse(bh); - return retval; - } - root = (struct dx_root *) bh->b_data; - - /* The 0th block becomes the root, move the dirents out */ - fde = &root->dotdot; - de = (struct ext3_dir_entry_2 *)((char *)fde + - ext3_rec_len_from_disk(fde->rec_len)); - if ((char *) de >= (((char *) root) + blocksize)) { - ext3_error(dir->i_sb, __func__, - "invalid rec_len for '..' in inode %lu", - dir->i_ino); - brelse(bh); - return -EIO; - } - len = ((char *) root) + blocksize - (char *) de; - - bh2 = ext3_append (handle, dir, &block, &retval); - if (!(bh2)) { - brelse(bh); - return retval; - } - EXT3_I(dir)->i_flags |= EXT3_INDEX_FL; - data1 = bh2->b_data; - - memcpy (data1, de, len); - de = (struct ext3_dir_entry_2 *) data1; - top = data1 + len; - while ((char *)(de2 = ext3_next_entry(de)) < top) - de = de2; - de->rec_len = ext3_rec_len_to_disk(data1 + blocksize - (char *) de); - /* Initialize the root; the dot dirents already exist */ - de = (struct ext3_dir_entry_2 *) (&root->dotdot); - de->rec_len = ext3_rec_len_to_disk(blocksize - EXT3_DIR_REC_LEN(2)); - memset (&root->info, 0, sizeof(root->info)); - root->info.info_length = sizeof(root->info); - root->info.hash_version = EXT3_SB(dir->i_sb)->s_def_hash_version; - entries = root->entries; - dx_set_block (entries, 1); - dx_set_count (entries, 1); - dx_set_limit (entries, dx_root_limit(dir, sizeof(root->info))); - - /* Initialize as for dx_probe */ - hinfo.hash_version = root->info.hash_version; - if (hinfo.hash_version <= DX_HASH_TEA) - hinfo.hash_version += EXT3_SB(dir->i_sb)->s_hash_unsigned; - hinfo.seed = EXT3_SB(dir->i_sb)->s_hash_seed; - ext3fs_dirhash(name, namelen, &hinfo); - frame = frames; - frame->entries = entries; - frame->at = entries; - frame->bh = bh; - bh = bh2; - /* - * Mark buffers dirty here so that if do_split() fails we write a - * consistent set of buffers to disk. - */ - ext3_journal_dirty_metadata(handle, frame->bh); - ext3_journal_dirty_metadata(handle, bh); - de = do_split(handle,dir, &bh, frame, &hinfo, &retval); - if (!de) { - ext3_mark_inode_dirty(handle, dir); - dx_release(frames); - return retval; - } - dx_release(frames); - - return add_dirent_to_buf(handle, dentry, inode, de, bh); -} - -/* - * ext3_add_entry() - * - * adds a file entry to the specified directory, using the same - * semantics as ext3_find_entry(). It returns NULL if it failed. - * - * NOTE!! The inode part of 'de' is left at 0 - which means you - * may not sleep between calling this and putting something into - * the entry, as someone else might have used it while you slept. - */ -static int ext3_add_entry (handle_t *handle, struct dentry *dentry, - struct inode *inode) -{ - struct inode *dir = d_inode(dentry->d_parent); - struct buffer_head * bh; - struct ext3_dir_entry_2 *de; - struct super_block * sb; - int retval; - int dx_fallback=0; - unsigned blocksize; - u32 block, blocks; - - sb = dir->i_sb; - blocksize = sb->s_blocksize; - if (!dentry->d_name.len) - return -EINVAL; - if (is_dx(dir)) { - retval = ext3_dx_add_entry(handle, dentry, inode); - if (!retval || (retval != ERR_BAD_DX_DIR)) - return retval; - EXT3_I(dir)->i_flags &= ~EXT3_INDEX_FL; - dx_fallback++; - ext3_mark_inode_dirty(handle, dir); - } - blocks = dir->i_size >> sb->s_blocksize_bits; - for (block = 0; block < blocks; block++) { - if (!(bh = ext3_dir_bread(handle, dir, block, 0, &retval))) - return retval; - - retval = add_dirent_to_buf(handle, dentry, inode, NULL, bh); - if (retval != -ENOSPC) - return retval; - - if (blocks == 1 && !dx_fallback && - EXT3_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_DIR_INDEX)) - return make_indexed_dir(handle, dentry, inode, bh); - brelse(bh); - } - bh = ext3_append(handle, dir, &block, &retval); - if (!bh) - return retval; - de = (struct ext3_dir_entry_2 *) bh->b_data; - de->inode = 0; - de->rec_len = ext3_rec_len_to_disk(blocksize); - return add_dirent_to_buf(handle, dentry, inode, de, bh); -} - -/* - * Returns 0 for success, or a negative error value - */ -static int ext3_dx_add_entry(handle_t *handle, struct dentry *dentry, - struct inode *inode) -{ - struct dx_frame frames[2], *frame; - struct dx_entry *entries, *at; - struct dx_hash_info hinfo; - struct buffer_head * bh; - struct inode *dir = d_inode(dentry->d_parent); - struct super_block * sb = dir->i_sb; - struct ext3_dir_entry_2 *de; - int err; - - frame = dx_probe(&dentry->d_name, dir, &hinfo, frames, &err); - if (!frame) - return err; - entries = frame->entries; - at = frame->at; - - if (!(bh = ext3_dir_bread(handle, dir, dx_get_block(frame->at), 0, &err))) - goto cleanup; - - BUFFER_TRACE(bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, bh); - if (err) - goto journal_error; - - err = add_dirent_to_buf(handle, dentry, inode, NULL, bh); - if (err != -ENOSPC) { - bh = NULL; - goto cleanup; - } - - /* Block full, should compress but for now just split */ - dxtrace(printk("using %u of %u node entries\n", - dx_get_count(entries), dx_get_limit(entries))); - /* Need to split index? */ - if (dx_get_count(entries) == dx_get_limit(entries)) { - u32 newblock; - unsigned icount = dx_get_count(entries); - int levels = frame - frames; - struct dx_entry *entries2; - struct dx_node *node2; - struct buffer_head *bh2; - - if (levels && (dx_get_count(frames->entries) == - dx_get_limit(frames->entries))) { - ext3_warning(sb, __func__, - "Directory index full!"); - err = -ENOSPC; - goto cleanup; - } - bh2 = ext3_append (handle, dir, &newblock, &err); - if (!(bh2)) - goto cleanup; - node2 = (struct dx_node *)(bh2->b_data); - entries2 = node2->entries; - memset(&node2->fake, 0, sizeof(struct fake_dirent)); - node2->fake.rec_len = ext3_rec_len_to_disk(sb->s_blocksize); - BUFFER_TRACE(frame->bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, frame->bh); - if (err) - goto journal_error; - if (levels) { - unsigned icount1 = icount/2, icount2 = icount - icount1; - unsigned hash2 = dx_get_hash(entries + icount1); - dxtrace(printk("Split index %i/%i\n", icount1, icount2)); - - BUFFER_TRACE(frame->bh, "get_write_access"); /* index root */ - err = ext3_journal_get_write_access(handle, - frames[0].bh); - if (err) - goto journal_error; - - memcpy ((char *) entries2, (char *) (entries + icount1), - icount2 * sizeof(struct dx_entry)); - dx_set_count (entries, icount1); - dx_set_count (entries2, icount2); - dx_set_limit (entries2, dx_node_limit(dir)); - - /* Which index block gets the new entry? */ - if (at - entries >= icount1) { - frame->at = at = at - entries - icount1 + entries2; - frame->entries = entries = entries2; - swap(frame->bh, bh2); - } - dx_insert_block (frames + 0, hash2, newblock); - dxtrace(dx_show_index ("node", frames[1].entries)); - dxtrace(dx_show_index ("node", - ((struct dx_node *) bh2->b_data)->entries)); - err = ext3_journal_dirty_metadata(handle, bh2); - if (err) - goto journal_error; - brelse (bh2); - } else { - dxtrace(printk("Creating second level index...\n")); - memcpy((char *) entries2, (char *) entries, - icount * sizeof(struct dx_entry)); - dx_set_limit(entries2, dx_node_limit(dir)); - - /* Set up root */ - dx_set_count(entries, 1); - dx_set_block(entries + 0, newblock); - ((struct dx_root *) frames[0].bh->b_data)->info.indirect_levels = 1; - - /* Add new access path frame */ - frame = frames + 1; - frame->at = at = at - entries + entries2; - frame->entries = entries = entries2; - frame->bh = bh2; - err = ext3_journal_get_write_access(handle, - frame->bh); - if (err) - goto journal_error; - } - err = ext3_journal_dirty_metadata(handle, frames[0].bh); - if (err) - goto journal_error; - } - de = do_split(handle, dir, &bh, frame, &hinfo, &err); - if (!de) - goto cleanup; - err = add_dirent_to_buf(handle, dentry, inode, de, bh); - bh = NULL; - goto cleanup; - -journal_error: - ext3_std_error(dir->i_sb, err); -cleanup: - if (bh) - brelse(bh); - dx_release(frames); - return err; -} - -/* - * ext3_delete_entry deletes a directory entry by merging it with the - * previous entry - */ -static int ext3_delete_entry (handle_t *handle, - struct inode * dir, - struct ext3_dir_entry_2 * de_del, - struct buffer_head * bh) -{ - struct ext3_dir_entry_2 * de, * pde; - int i; - - i = 0; - pde = NULL; - de = (struct ext3_dir_entry_2 *) bh->b_data; - while (i < bh->b_size) { - if (!ext3_check_dir_entry("ext3_delete_entry", dir, de, bh, i)) - return -EIO; - if (de == de_del) { - int err; - - BUFFER_TRACE(bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, bh); - if (err) - goto journal_error; - - if (pde) - pde->rec_len = ext3_rec_len_to_disk( - ext3_rec_len_from_disk(pde->rec_len) + - ext3_rec_len_from_disk(de->rec_len)); - else - de->inode = 0; - dir->i_version++; - BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, bh); - if (err) { -journal_error: - ext3_std_error(dir->i_sb, err); - return err; - } - return 0; - } - i += ext3_rec_len_from_disk(de->rec_len); - pde = de; - de = ext3_next_entry(de); - } - return -ENOENT; -} - -static int ext3_add_nondir(handle_t *handle, - struct dentry *dentry, struct inode *inode) -{ - int err = ext3_add_entry(handle, dentry, inode); - if (!err) { - ext3_mark_inode_dirty(handle, inode); - unlock_new_inode(inode); - d_instantiate(dentry, inode); - return 0; - } - drop_nlink(inode); - unlock_new_inode(inode); - iput(inode); - return err; -} - -/* - * By the time this is called, we already have created - * the directory cache entry for the new file, but it - * is so far negative - it has no inode. - * - * If the create succeeds, we fill in the inode information - * with d_instantiate(). - */ -static int ext3_create (struct inode * dir, struct dentry * dentry, umode_t mode, - bool excl) -{ - handle_t *handle; - struct inode * inode; - int err, retries = 0; - - dquot_initialize(dir); - -retry: - handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + - EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + - EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - if (IS_DIRSYNC(dir)) - handle->h_sync = 1; - - inode = ext3_new_inode (handle, dir, &dentry->d_name, mode); - err = PTR_ERR(inode); - if (!IS_ERR(inode)) { - inode->i_op = &ext3_file_inode_operations; - inode->i_fop = &ext3_file_operations; - ext3_set_aops(inode); - err = ext3_add_nondir(handle, dentry, inode); - } - ext3_journal_stop(handle); - if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries)) - goto retry; - return err; -} - -static int ext3_mknod (struct inode * dir, struct dentry *dentry, - umode_t mode, dev_t rdev) -{ - handle_t *handle; - struct inode *inode; - int err, retries = 0; - - if (!new_valid_dev(rdev)) - return -EINVAL; - - dquot_initialize(dir); - -retry: - handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + - EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + - EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - if (IS_DIRSYNC(dir)) - handle->h_sync = 1; - - inode = ext3_new_inode (handle, dir, &dentry->d_name, mode); - err = PTR_ERR(inode); - if (!IS_ERR(inode)) { - init_special_inode(inode, inode->i_mode, rdev); -#ifdef CONFIG_EXT3_FS_XATTR - inode->i_op = &ext3_special_inode_operations; -#endif - err = ext3_add_nondir(handle, dentry, inode); - } - ext3_journal_stop(handle); - if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries)) - goto retry; - return err; -} - -static int ext3_tmpfile(struct inode *dir, struct dentry *dentry, umode_t mode) -{ - handle_t *handle; - struct inode *inode; - int err, retries = 0; - - dquot_initialize(dir); - -retry: - handle = ext3_journal_start(dir, EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb) + - 4 + EXT3_XATTR_TRANS_BLOCKS); - - if (IS_ERR(handle)) - return PTR_ERR(handle); - - inode = ext3_new_inode (handle, dir, NULL, mode); - err = PTR_ERR(inode); - if (!IS_ERR(inode)) { - inode->i_op = &ext3_file_inode_operations; - inode->i_fop = &ext3_file_operations; - ext3_set_aops(inode); - d_tmpfile(dentry, inode); - err = ext3_orphan_add(handle, inode); - if (err) - goto err_unlock_inode; - mark_inode_dirty(inode); - unlock_new_inode(inode); - } - ext3_journal_stop(handle); - if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries)) - goto retry; - return err; -err_unlock_inode: - ext3_journal_stop(handle); - unlock_new_inode(inode); - return err; -} - -static int ext3_mkdir(struct inode * dir, struct dentry * dentry, umode_t mode) -{ - handle_t *handle; - struct inode * inode; - struct buffer_head * dir_block = NULL; - struct ext3_dir_entry_2 * de; - int err, retries = 0; - - if (dir->i_nlink >= EXT3_LINK_MAX) - return -EMLINK; - - dquot_initialize(dir); - -retry: - handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + - EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + - EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - if (IS_DIRSYNC(dir)) - handle->h_sync = 1; - - inode = ext3_new_inode (handle, dir, &dentry->d_name, S_IFDIR | mode); - err = PTR_ERR(inode); - if (IS_ERR(inode)) - goto out_stop; - - inode->i_op = &ext3_dir_inode_operations; - inode->i_fop = &ext3_dir_operations; - inode->i_size = EXT3_I(inode)->i_disksize = inode->i_sb->s_blocksize; - if (!(dir_block = ext3_dir_bread(handle, inode, 0, 1, &err))) - goto out_clear_inode; - - BUFFER_TRACE(dir_block, "get_write_access"); - err = ext3_journal_get_write_access(handle, dir_block); - if (err) - goto out_clear_inode; - - de = (struct ext3_dir_entry_2 *) dir_block->b_data; - de->inode = cpu_to_le32(inode->i_ino); - de->name_len = 1; - de->rec_len = ext3_rec_len_to_disk(EXT3_DIR_REC_LEN(de->name_len)); - strcpy (de->name, "."); - ext3_set_de_type(dir->i_sb, de, S_IFDIR); - de = ext3_next_entry(de); - de->inode = cpu_to_le32(dir->i_ino); - de->rec_len = ext3_rec_len_to_disk(inode->i_sb->s_blocksize - - EXT3_DIR_REC_LEN(1)); - de->name_len = 2; - strcpy (de->name, ".."); - ext3_set_de_type(dir->i_sb, de, S_IFDIR); - set_nlink(inode, 2); - BUFFER_TRACE(dir_block, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, dir_block); - if (err) - goto out_clear_inode; - - err = ext3_mark_inode_dirty(handle, inode); - if (!err) - err = ext3_add_entry (handle, dentry, inode); - - if (err) { -out_clear_inode: - clear_nlink(inode); - unlock_new_inode(inode); - ext3_mark_inode_dirty(handle, inode); - iput (inode); - goto out_stop; - } - inc_nlink(dir); - ext3_update_dx_flag(dir); - err = ext3_mark_inode_dirty(handle, dir); - if (err) - goto out_clear_inode; - - unlock_new_inode(inode); - d_instantiate(dentry, inode); -out_stop: - brelse(dir_block); - ext3_journal_stop(handle); - if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries)) - goto retry; - return err; -} - -/* - * routine to check that the specified directory is empty (for rmdir) - */ -static int empty_dir (struct inode * inode) -{ - unsigned long offset; - struct buffer_head * bh; - struct ext3_dir_entry_2 * de, * de1; - struct super_block * sb; - int err = 0; - - sb = inode->i_sb; - if (inode->i_size < EXT3_DIR_REC_LEN(1) + EXT3_DIR_REC_LEN(2) || - !(bh = ext3_dir_bread(NULL, inode, 0, 0, &err))) { - if (err) - ext3_error(inode->i_sb, __func__, - "error %d reading directory #%lu offset 0", - err, inode->i_ino); - else - ext3_warning(inode->i_sb, __func__, - "bad directory (dir #%lu) - no data block", - inode->i_ino); - return 1; - } - de = (struct ext3_dir_entry_2 *) bh->b_data; - de1 = ext3_next_entry(de); - if (le32_to_cpu(de->inode) != inode->i_ino || - !le32_to_cpu(de1->inode) || - strcmp (".", de->name) || - strcmp ("..", de1->name)) { - ext3_warning (inode->i_sb, "empty_dir", - "bad directory (dir #%lu) - no `.' or `..'", - inode->i_ino); - brelse (bh); - return 1; - } - offset = ext3_rec_len_from_disk(de->rec_len) + - ext3_rec_len_from_disk(de1->rec_len); - de = ext3_next_entry(de1); - while (offset < inode->i_size ) { - if (!bh || - (void *) de >= (void *) (bh->b_data+sb->s_blocksize)) { - err = 0; - brelse (bh); - if (!(bh = ext3_dir_bread (NULL, inode, - offset >> EXT3_BLOCK_SIZE_BITS(sb), 0, &err))) { - if (err) - ext3_error(sb, __func__, - "error %d reading directory" - " #%lu offset %lu", - err, inode->i_ino, offset); - offset += sb->s_blocksize; - continue; - } - de = (struct ext3_dir_entry_2 *) bh->b_data; - } - if (!ext3_check_dir_entry("empty_dir", inode, de, bh, offset)) { - de = (struct ext3_dir_entry_2 *)(bh->b_data + - sb->s_blocksize); - offset = (offset | (sb->s_blocksize - 1)) + 1; - continue; - } - if (le32_to_cpu(de->inode)) { - brelse (bh); - return 0; - } - offset += ext3_rec_len_from_disk(de->rec_len); - de = ext3_next_entry(de); - } - brelse (bh); - return 1; -} - -/* ext3_orphan_add() links an unlinked or truncated inode into a list of - * such inodes, starting at the superblock, in case we crash before the - * file is closed/deleted, or in case the inode truncate spans multiple - * transactions and the last transaction is not recovered after a crash. - * - * At filesystem recovery time, we walk this list deleting unlinked - * inodes and truncating linked inodes in ext3_orphan_cleanup(). - */ -int ext3_orphan_add(handle_t *handle, struct inode *inode) -{ - struct super_block *sb = inode->i_sb; - struct ext3_iloc iloc; - int err = 0, rc; - - mutex_lock(&EXT3_SB(sb)->s_orphan_lock); - if (!list_empty(&EXT3_I(inode)->i_orphan)) - goto out_unlock; - - /* Orphan handling is only valid for files with data blocks - * being truncated, or files being unlinked. */ - - /* @@@ FIXME: Observation from aviro: - * I think I can trigger J_ASSERT in ext3_orphan_add(). We block - * here (on s_orphan_lock), so race with ext3_link() which might bump - * ->i_nlink. For, say it, character device. Not a regular file, - * not a directory, not a symlink and ->i_nlink > 0. - * - * tytso, 4/25/2009: I'm not sure how that could happen; - * shouldn't the fs core protect us from these sort of - * unlink()/link() races? - */ - J_ASSERT ((S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || - S_ISLNK(inode->i_mode)) || inode->i_nlink == 0); - - BUFFER_TRACE(EXT3_SB(sb)->s_sbh, "get_write_access"); - err = ext3_journal_get_write_access(handle, EXT3_SB(sb)->s_sbh); - if (err) - goto out_unlock; - - err = ext3_reserve_inode_write(handle, inode, &iloc); - if (err) - goto out_unlock; - - /* Insert this inode at the head of the on-disk orphan list... */ - NEXT_ORPHAN(inode) = le32_to_cpu(EXT3_SB(sb)->s_es->s_last_orphan); - EXT3_SB(sb)->s_es->s_last_orphan = cpu_to_le32(inode->i_ino); - err = ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh); - rc = ext3_mark_iloc_dirty(handle, inode, &iloc); - if (!err) - err = rc; - - /* Only add to the head of the in-memory list if all the - * previous operations succeeded. If the orphan_add is going to - * fail (possibly taking the journal offline), we can't risk - * leaving the inode on the orphan list: stray orphan-list - * entries can cause panics at unmount time. - * - * This is safe: on error we're going to ignore the orphan list - * anyway on the next recovery. */ - if (!err) - list_add(&EXT3_I(inode)->i_orphan, &EXT3_SB(sb)->s_orphan); - - jbd_debug(4, "superblock will point to %lu\n", inode->i_ino); - jbd_debug(4, "orphan inode %lu will point to %d\n", - inode->i_ino, NEXT_ORPHAN(inode)); -out_unlock: - mutex_unlock(&EXT3_SB(sb)->s_orphan_lock); - ext3_std_error(inode->i_sb, err); - return err; -} - -/* - * ext3_orphan_del() removes an unlinked or truncated inode from the list - * of such inodes stored on disk, because it is finally being cleaned up. - */ -int ext3_orphan_del(handle_t *handle, struct inode *inode) -{ - struct list_head *prev; - struct ext3_inode_info *ei = EXT3_I(inode); - struct ext3_sb_info *sbi; - unsigned long ino_next; - struct ext3_iloc iloc; - int err = 0; - - mutex_lock(&EXT3_SB(inode->i_sb)->s_orphan_lock); - if (list_empty(&ei->i_orphan)) - goto out; - - ino_next = NEXT_ORPHAN(inode); - prev = ei->i_orphan.prev; - sbi = EXT3_SB(inode->i_sb); - - jbd_debug(4, "remove inode %lu from orphan list\n", inode->i_ino); - - list_del_init(&ei->i_orphan); - - /* If we're on an error path, we may not have a valid - * transaction handle with which to update the orphan list on - * disk, but we still need to remove the inode from the linked - * list in memory. */ - if (!handle) - goto out; - - err = ext3_reserve_inode_write(handle, inode, &iloc); - if (err) - goto out_err; - - if (prev == &sbi->s_orphan) { - jbd_debug(4, "superblock will point to %lu\n", ino_next); - BUFFER_TRACE(sbi->s_sbh, "get_write_access"); - err = ext3_journal_get_write_access(handle, sbi->s_sbh); - if (err) - goto out_brelse; - sbi->s_es->s_last_orphan = cpu_to_le32(ino_next); - err = ext3_journal_dirty_metadata(handle, sbi->s_sbh); - } else { - struct ext3_iloc iloc2; - struct inode *i_prev = - &list_entry(prev, struct ext3_inode_info, i_orphan)->vfs_inode; - - jbd_debug(4, "orphan inode %lu will point to %lu\n", - i_prev->i_ino, ino_next); - err = ext3_reserve_inode_write(handle, i_prev, &iloc2); - if (err) - goto out_brelse; - NEXT_ORPHAN(i_prev) = ino_next; - err = ext3_mark_iloc_dirty(handle, i_prev, &iloc2); - } - if (err) - goto out_brelse; - NEXT_ORPHAN(inode) = 0; - err = ext3_mark_iloc_dirty(handle, inode, &iloc); - -out_err: - ext3_std_error(inode->i_sb, err); -out: - mutex_unlock(&EXT3_SB(inode->i_sb)->s_orphan_lock); - return err; - -out_brelse: - brelse(iloc.bh); - goto out_err; -} - -static int ext3_rmdir (struct inode * dir, struct dentry *dentry) -{ - int retval; - struct inode * inode; - struct buffer_head * bh; - struct ext3_dir_entry_2 * de; - handle_t *handle; - - /* Initialize quotas before so that eventual writes go in - * separate transaction */ - dquot_initialize(dir); - dquot_initialize(d_inode(dentry)); - - handle = ext3_journal_start(dir, EXT3_DELETE_TRANS_BLOCKS(dir->i_sb)); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - retval = -ENOENT; - bh = ext3_find_entry(dir, &dentry->d_name, &de); - if (!bh) - goto end_rmdir; - - if (IS_DIRSYNC(dir)) - handle->h_sync = 1; - - inode = d_inode(dentry); - - retval = -EIO; - if (le32_to_cpu(de->inode) != inode->i_ino) - goto end_rmdir; - - retval = -ENOTEMPTY; - if (!empty_dir (inode)) - goto end_rmdir; - - retval = ext3_delete_entry(handle, dir, de, bh); - if (retval) - goto end_rmdir; - if (inode->i_nlink != 2) - ext3_warning (inode->i_sb, "ext3_rmdir", - "empty directory has nlink!=2 (%d)", - inode->i_nlink); - inode->i_version++; - clear_nlink(inode); - /* There's no need to set i_disksize: the fact that i_nlink is - * zero will ensure that the right thing happens during any - * recovery. */ - inode->i_size = 0; - ext3_orphan_add(handle, inode); - inode->i_ctime = dir->i_ctime = dir->i_mtime = CURRENT_TIME_SEC; - ext3_mark_inode_dirty(handle, inode); - drop_nlink(dir); - ext3_update_dx_flag(dir); - ext3_mark_inode_dirty(handle, dir); - -end_rmdir: - ext3_journal_stop(handle); - brelse (bh); - return retval; -} - -static int ext3_unlink(struct inode * dir, struct dentry *dentry) -{ - int retval; - struct inode * inode; - struct buffer_head * bh; - struct ext3_dir_entry_2 * de; - handle_t *handle; - - trace_ext3_unlink_enter(dir, dentry); - /* Initialize quotas before so that eventual writes go - * in separate transaction */ - dquot_initialize(dir); - dquot_initialize(d_inode(dentry)); - - handle = ext3_journal_start(dir, EXT3_DELETE_TRANS_BLOCKS(dir->i_sb)); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - if (IS_DIRSYNC(dir)) - handle->h_sync = 1; - - retval = -ENOENT; - bh = ext3_find_entry(dir, &dentry->d_name, &de); - if (!bh) - goto end_unlink; - - inode = d_inode(dentry); - - retval = -EIO; - if (le32_to_cpu(de->inode) != inode->i_ino) - goto end_unlink; - - if (!inode->i_nlink) { - ext3_warning (inode->i_sb, "ext3_unlink", - "Deleting nonexistent file (%lu), %d", - inode->i_ino, inode->i_nlink); - set_nlink(inode, 1); - } - retval = ext3_delete_entry(handle, dir, de, bh); - if (retval) - goto end_unlink; - dir->i_ctime = dir->i_mtime = CURRENT_TIME_SEC; - ext3_update_dx_flag(dir); - ext3_mark_inode_dirty(handle, dir); - drop_nlink(inode); - if (!inode->i_nlink) - ext3_orphan_add(handle, inode); - inode->i_ctime = dir->i_ctime; - ext3_mark_inode_dirty(handle, inode); - retval = 0; - -end_unlink: - ext3_journal_stop(handle); - brelse (bh); - trace_ext3_unlink_exit(dentry, retval); - return retval; -} - -static int ext3_symlink (struct inode * dir, - struct dentry *dentry, const char * symname) -{ - handle_t *handle; - struct inode * inode; - int l, err, retries = 0; - int credits; - - l = strlen(symname)+1; - if (l > dir->i_sb->s_blocksize) - return -ENAMETOOLONG; - - dquot_initialize(dir); - - if (l > EXT3_N_BLOCKS * 4) { - /* - * For non-fast symlinks, we just allocate inode and put it on - * orphan list in the first transaction => we need bitmap, - * group descriptor, sb, inode block, quota blocks, and - * possibly selinux xattr blocks. - */ - credits = 4 + EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb) + - EXT3_XATTR_TRANS_BLOCKS; - } else { - /* - * Fast symlink. We have to add entry to directory - * (EXT3_DATA_TRANS_BLOCKS + EXT3_INDEX_EXTRA_TRANS_BLOCKS), - * allocate new inode (bitmap, group descriptor, inode block, - * quota blocks, sb is already counted in previous macros). - */ - credits = EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + - EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + - EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb); - } -retry: - handle = ext3_journal_start(dir, credits); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - if (IS_DIRSYNC(dir)) - handle->h_sync = 1; - - inode = ext3_new_inode (handle, dir, &dentry->d_name, S_IFLNK|S_IRWXUGO); - err = PTR_ERR(inode); - if (IS_ERR(inode)) - goto out_stop; - - if (l > EXT3_N_BLOCKS * 4) { - inode->i_op = &ext3_symlink_inode_operations; - ext3_set_aops(inode); - /* - * We cannot call page_symlink() with transaction started - * because it calls into ext3_write_begin() which acquires page - * lock which ranks below transaction start (and it can also - * wait for journal commit if we are running out of space). So - * we have to stop transaction now and restart it when symlink - * contents is written. - * - * To keep fs consistent in case of crash, we have to put inode - * to orphan list in the mean time. - */ - drop_nlink(inode); - err = ext3_orphan_add(handle, inode); - ext3_journal_stop(handle); - if (err) - goto err_drop_inode; - err = __page_symlink(inode, symname, l, 1); - if (err) - goto err_drop_inode; - /* - * Now inode is being linked into dir (EXT3_DATA_TRANS_BLOCKS - * + EXT3_INDEX_EXTRA_TRANS_BLOCKS), inode is also modified - */ - handle = ext3_journal_start(dir, - EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + - EXT3_INDEX_EXTRA_TRANS_BLOCKS + 1); - if (IS_ERR(handle)) { - err = PTR_ERR(handle); - goto err_drop_inode; - } - set_nlink(inode, 1); - err = ext3_orphan_del(handle, inode); - if (err) { - ext3_journal_stop(handle); - drop_nlink(inode); - goto err_drop_inode; - } - } else { - inode->i_op = &ext3_fast_symlink_inode_operations; - inode->i_link = (char*)&EXT3_I(inode)->i_data; - memcpy(inode->i_link, symname, l); - inode->i_size = l-1; - } - EXT3_I(inode)->i_disksize = inode->i_size; - err = ext3_add_nondir(handle, dentry, inode); -out_stop: - ext3_journal_stop(handle); - if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries)) - goto retry; - return err; -err_drop_inode: - unlock_new_inode(inode); - iput(inode); - return err; -} - -static int ext3_link (struct dentry * old_dentry, - struct inode * dir, struct dentry *dentry) -{ - handle_t *handle; - struct inode *inode = d_inode(old_dentry); - int err, retries = 0; - - if (inode->i_nlink >= EXT3_LINK_MAX) - return -EMLINK; - - dquot_initialize(dir); - -retry: - handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + - EXT3_INDEX_EXTRA_TRANS_BLOCKS + 1); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - if (IS_DIRSYNC(dir)) - handle->h_sync = 1; - - inode->i_ctime = CURRENT_TIME_SEC; - inc_nlink(inode); - ihold(inode); - - err = ext3_add_entry(handle, dentry, inode); - if (!err) { - ext3_mark_inode_dirty(handle, inode); - /* this can happen only for tmpfile being - * linked the first time - */ - if (inode->i_nlink == 1) - ext3_orphan_del(handle, inode); - d_instantiate(dentry, inode); - } else { - drop_nlink(inode); - iput(inode); - } - ext3_journal_stop(handle); - if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries)) - goto retry; - return err; -} - -#define PARENT_INO(buffer) \ - (ext3_next_entry((struct ext3_dir_entry_2 *)(buffer))->inode) - -/* - * Anybody can rename anything with this: the permission checks are left to the - * higher-level routines. - */ -static int ext3_rename (struct inode * old_dir, struct dentry *old_dentry, - struct inode * new_dir,struct dentry *new_dentry) -{ - handle_t *handle; - struct inode * old_inode, * new_inode; - struct buffer_head * old_bh, * new_bh, * dir_bh; - struct ext3_dir_entry_2 * old_de, * new_de; - int retval, flush_file = 0; - - dquot_initialize(old_dir); - dquot_initialize(new_dir); - - old_bh = new_bh = dir_bh = NULL; - - /* Initialize quotas before so that eventual writes go - * in separate transaction */ - if (d_really_is_positive(new_dentry)) - dquot_initialize(d_inode(new_dentry)); - handle = ext3_journal_start(old_dir, 2 * - EXT3_DATA_TRANS_BLOCKS(old_dir->i_sb) + - EXT3_INDEX_EXTRA_TRANS_BLOCKS + 2); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - if (IS_DIRSYNC(old_dir) || IS_DIRSYNC(new_dir)) - handle->h_sync = 1; - - old_bh = ext3_find_entry(old_dir, &old_dentry->d_name, &old_de); - /* - * Check for inode number is _not_ due to possible IO errors. - * We might rmdir the source, keep it as pwd of some process - * and merrily kill the link to whatever was created under the - * same name. Goodbye sticky bit ;-< - */ - old_inode = d_inode(old_dentry); - retval = -ENOENT; - if (!old_bh || le32_to_cpu(old_de->inode) != old_inode->i_ino) - goto end_rename; - - new_inode = d_inode(new_dentry); - new_bh = ext3_find_entry(new_dir, &new_dentry->d_name, &new_de); - if (new_bh) { - if (!new_inode) { - brelse (new_bh); - new_bh = NULL; - } - } - if (S_ISDIR(old_inode->i_mode)) { - if (new_inode) { - retval = -ENOTEMPTY; - if (!empty_dir (new_inode)) - goto end_rename; - } - retval = -EIO; - dir_bh = ext3_dir_bread(handle, old_inode, 0, 0, &retval); - if (!dir_bh) - goto end_rename; - if (le32_to_cpu(PARENT_INO(dir_bh->b_data)) != old_dir->i_ino) - goto end_rename; - retval = -EMLINK; - if (!new_inode && new_dir!=old_dir && - new_dir->i_nlink >= EXT3_LINK_MAX) - goto end_rename; - } - if (!new_bh) { - retval = ext3_add_entry (handle, new_dentry, old_inode); - if (retval) - goto end_rename; - } else { - BUFFER_TRACE(new_bh, "get write access"); - retval = ext3_journal_get_write_access(handle, new_bh); - if (retval) - goto journal_error; - new_de->inode = cpu_to_le32(old_inode->i_ino); - if (EXT3_HAS_INCOMPAT_FEATURE(new_dir->i_sb, - EXT3_FEATURE_INCOMPAT_FILETYPE)) - new_de->file_type = old_de->file_type; - new_dir->i_version++; - new_dir->i_ctime = new_dir->i_mtime = CURRENT_TIME_SEC; - ext3_mark_inode_dirty(handle, new_dir); - BUFFER_TRACE(new_bh, "call ext3_journal_dirty_metadata"); - retval = ext3_journal_dirty_metadata(handle, new_bh); - if (retval) - goto journal_error; - brelse(new_bh); - new_bh = NULL; - } - - /* - * Like most other Unix systems, set the ctime for inodes on a - * rename. - */ - old_inode->i_ctime = CURRENT_TIME_SEC; - ext3_mark_inode_dirty(handle, old_inode); - - /* - * ok, that's it - */ - if (le32_to_cpu(old_de->inode) != old_inode->i_ino || - old_de->name_len != old_dentry->d_name.len || - strncmp(old_de->name, old_dentry->d_name.name, old_de->name_len) || - (retval = ext3_delete_entry(handle, old_dir, - old_de, old_bh)) == -ENOENT) { - /* old_de could have moved from under us during htree split, so - * make sure that we are deleting the right entry. We might - * also be pointing to a stale entry in the unused part of - * old_bh so just checking inum and the name isn't enough. */ - struct buffer_head *old_bh2; - struct ext3_dir_entry_2 *old_de2; - - old_bh2 = ext3_find_entry(old_dir, &old_dentry->d_name, - &old_de2); - if (old_bh2) { - retval = ext3_delete_entry(handle, old_dir, - old_de2, old_bh2); - brelse(old_bh2); - } - } - if (retval) { - ext3_warning(old_dir->i_sb, "ext3_rename", - "Deleting old file (%lu), %d, error=%d", - old_dir->i_ino, old_dir->i_nlink, retval); - } - - if (new_inode) { - drop_nlink(new_inode); - new_inode->i_ctime = CURRENT_TIME_SEC; - } - old_dir->i_ctime = old_dir->i_mtime = CURRENT_TIME_SEC; - ext3_update_dx_flag(old_dir); - if (dir_bh) { - BUFFER_TRACE(dir_bh, "get_write_access"); - retval = ext3_journal_get_write_access(handle, dir_bh); - if (retval) - goto journal_error; - PARENT_INO(dir_bh->b_data) = cpu_to_le32(new_dir->i_ino); - BUFFER_TRACE(dir_bh, "call ext3_journal_dirty_metadata"); - retval = ext3_journal_dirty_metadata(handle, dir_bh); - if (retval) { -journal_error: - ext3_std_error(new_dir->i_sb, retval); - goto end_rename; - } - drop_nlink(old_dir); - if (new_inode) { - drop_nlink(new_inode); - } else { - inc_nlink(new_dir); - ext3_update_dx_flag(new_dir); - ext3_mark_inode_dirty(handle, new_dir); - } - } - ext3_mark_inode_dirty(handle, old_dir); - if (new_inode) { - ext3_mark_inode_dirty(handle, new_inode); - if (!new_inode->i_nlink) - ext3_orphan_add(handle, new_inode); - if (ext3_should_writeback_data(new_inode)) - flush_file = 1; - } - retval = 0; - -end_rename: - brelse (dir_bh); - brelse (old_bh); - brelse (new_bh); - ext3_journal_stop(handle); - if (retval == 0 && flush_file) - filemap_flush(old_inode->i_mapping); - return retval; -} - -/* - * directories can handle most operations... - */ -const struct inode_operations ext3_dir_inode_operations = { - .create = ext3_create, - .lookup = ext3_lookup, - .link = ext3_link, - .unlink = ext3_unlink, - .symlink = ext3_symlink, - .mkdir = ext3_mkdir, - .rmdir = ext3_rmdir, - .mknod = ext3_mknod, - .tmpfile = ext3_tmpfile, - .rename = ext3_rename, - .setattr = ext3_setattr, -#ifdef CONFIG_EXT3_FS_XATTR - .setxattr = generic_setxattr, - .getxattr = generic_getxattr, - .listxattr = ext3_listxattr, - .removexattr = generic_removexattr, -#endif - .get_acl = ext3_get_acl, - .set_acl = ext3_set_acl, -}; - -const struct inode_operations ext3_special_inode_operations = { - .setattr = ext3_setattr, -#ifdef CONFIG_EXT3_FS_XATTR - .setxattr = generic_setxattr, - .getxattr = generic_getxattr, - .listxattr = ext3_listxattr, - .removexattr = generic_removexattr, -#endif - .get_acl = ext3_get_acl, - .set_acl = ext3_set_acl, -}; diff --git a/fs/ext3/namei.h b/fs/ext3/namei.h deleted file mode 100644 index 46304d8..0000000 --- a/fs/ext3/namei.h +++ /dev/null @@ -1,27 +0,0 @@ -/* linux/fs/ext3/namei.h - * - * Copyright (C) 2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * -*/ - -extern struct dentry *ext3_get_parent(struct dentry *child); - -static inline struct buffer_head *ext3_dir_bread(handle_t *handle, - struct inode *inode, - int block, int create, - int *err) -{ - struct buffer_head *bh; - - bh = ext3_bread(handle, inode, block, create, err); - - if (!bh && !(*err)) { - *err = -EIO; - ext3_error(inode->i_sb, __func__, - "Directory hole detected on inode %lu\n", - inode->i_ino); - return NULL; - } - return bh; -} diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c deleted file mode 100644 index 2710565..0000000 --- a/fs/ext3/resize.c +++ /dev/null @@ -1,1117 +0,0 @@ -/* - * linux/fs/ext3/resize.c - * - * Support for resizing an ext3 filesystem while it is mounted. - * - * Copyright (C) 2001, 2002 Andreas Dilger <adilger@clusterfs.com> - * - * This could probably be made into a module, because it is not often in use. - */ - - -#define EXT3FS_DEBUG - -#include "ext3.h" - - -#define outside(b, first, last) ((b) < (first) || (b) >= (last)) -#define inside(b, first, last) ((b) >= (first) && (b) < (last)) - -static int verify_group_input(struct super_block *sb, - struct ext3_new_group_data *input) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - struct ext3_super_block *es = sbi->s_es; - ext3_fsblk_t start = le32_to_cpu(es->s_blocks_count); - ext3_fsblk_t end = start + input->blocks_count; - unsigned group = input->group; - ext3_fsblk_t itend = input->inode_table + sbi->s_itb_per_group; - unsigned overhead = ext3_bg_has_super(sb, group) ? - (1 + ext3_bg_num_gdb(sb, group) + - le16_to_cpu(es->s_reserved_gdt_blocks)) : 0; - ext3_fsblk_t metaend = start + overhead; - struct buffer_head *bh = NULL; - ext3_grpblk_t free_blocks_count; - int err = -EINVAL; - - input->free_blocks_count = free_blocks_count = - input->blocks_count - 2 - overhead - sbi->s_itb_per_group; - - if (test_opt(sb, DEBUG)) - printk(KERN_DEBUG "EXT3-fs: adding %s group %u: %u blocks " - "(%d free, %u reserved)\n", - ext3_bg_has_super(sb, input->group) ? "normal" : - "no-super", input->group, input->blocks_count, - free_blocks_count, input->reserved_blocks); - - if (group != sbi->s_groups_count) - ext3_warning(sb, __func__, - "Cannot add at group %u (only %lu groups)", - input->group, sbi->s_groups_count); - else if ((start - le32_to_cpu(es->s_first_data_block)) % - EXT3_BLOCKS_PER_GROUP(sb)) - ext3_warning(sb, __func__, "Last group not full"); - else if (input->reserved_blocks > input->blocks_count / 5) - ext3_warning(sb, __func__, "Reserved blocks too high (%u)", - input->reserved_blocks); - else if (free_blocks_count < 0) - ext3_warning(sb, __func__, "Bad blocks count %u", - input->blocks_count); - else if (!(bh = sb_bread(sb, end - 1))) - ext3_warning(sb, __func__, - "Cannot read last block ("E3FSBLK")", - end - 1); - else if (outside(input->block_bitmap, start, end)) - ext3_warning(sb, __func__, - "Block bitmap not in group (block %u)", - input->block_bitmap); - else if (outside(input->inode_bitmap, start, end)) - ext3_warning(sb, __func__, - "Inode bitmap not in group (block %u)", - input->inode_bitmap); - else if (outside(input->inode_table, start, end) || - outside(itend - 1, start, end)) - ext3_warning(sb, __func__, - "Inode table not in group (blocks %u-"E3FSBLK")", - input->inode_table, itend - 1); - else if (input->inode_bitmap == input->block_bitmap) - ext3_warning(sb, __func__, - "Block bitmap same as inode bitmap (%u)", - input->block_bitmap); - else if (inside(input->block_bitmap, input->inode_table, itend)) - ext3_warning(sb, __func__, - "Block bitmap (%u) in inode table (%u-"E3FSBLK")", - input->block_bitmap, input->inode_table, itend-1); - else if (inside(input->inode_bitmap, input->inode_table, itend)) - ext3_warning(sb, __func__, - "Inode bitmap (%u) in inode table (%u-"E3FSBLK")", - input->inode_bitmap, input->inode_table, itend-1); - else if (inside(input->block_bitmap, start, metaend)) - ext3_warning(sb, __func__, - "Block bitmap (%u) in GDT table" - " ("E3FSBLK"-"E3FSBLK")", - input->block_bitmap, start, metaend - 1); - else if (inside(input->inode_bitmap, start, metaend)) - ext3_warning(sb, __func__, - "Inode bitmap (%u) in GDT table" - " ("E3FSBLK"-"E3FSBLK")", - input->inode_bitmap, start, metaend - 1); - else if (inside(input->inode_table, start, metaend) || - inside(itend - 1, start, metaend)) - ext3_warning(sb, __func__, - "Inode table (%u-"E3FSBLK") overlaps" - "GDT table ("E3FSBLK"-"E3FSBLK")", - input->inode_table, itend - 1, start, metaend - 1); - else - err = 0; - brelse(bh); - - return err; -} - -static struct buffer_head *bclean(handle_t *handle, struct super_block *sb, - ext3_fsblk_t blk) -{ - struct buffer_head *bh; - int err; - - bh = sb_getblk(sb, blk); - if (unlikely(!bh)) - return ERR_PTR(-ENOMEM); - if ((err = ext3_journal_get_write_access(handle, bh))) { - brelse(bh); - bh = ERR_PTR(err); - } else { - lock_buffer(bh); - memset(bh->b_data, 0, sb->s_blocksize); - set_buffer_uptodate(bh); - unlock_buffer(bh); - } - - return bh; -} - -/* - * To avoid calling the atomic setbit hundreds or thousands of times, we only - * need to use it within a single byte (to ensure we get endianness right). - * We can use memset for the rest of the bitmap as there are no other users. - */ -static void mark_bitmap_end(int start_bit, int end_bit, char *bitmap) -{ - int i; - - if (start_bit >= end_bit) - return; - - ext3_debug("mark end bits +%d through +%d used\n", start_bit, end_bit); - for (i = start_bit; i < ((start_bit + 7) & ~7UL); i++) - ext3_set_bit(i, bitmap); - if (i < end_bit) - memset(bitmap + (i >> 3), 0xff, (end_bit - i) >> 3); -} - -/* - * If we have fewer than thresh credits, extend by EXT3_MAX_TRANS_DATA. - * If that fails, restart the transaction & regain write access for the - * buffer head which is used for block_bitmap modifications. - */ -static int extend_or_restart_transaction(handle_t *handle, int thresh, - struct buffer_head *bh) -{ - int err; - - if (handle->h_buffer_credits >= thresh) - return 0; - - err = ext3_journal_extend(handle, EXT3_MAX_TRANS_DATA); - if (err < 0) - return err; - if (err) { - err = ext3_journal_restart(handle, EXT3_MAX_TRANS_DATA); - if (err) - return err; - err = ext3_journal_get_write_access(handle, bh); - if (err) - return err; - } - - return 0; -} - -/* - * Set up the block and inode bitmaps, and the inode table for the new group. - * This doesn't need to be part of the main transaction, since we are only - * changing blocks outside the actual filesystem. We still do journaling to - * ensure the recovery is correct in case of a failure just after resize. - * If any part of this fails, we simply abort the resize. - */ -static int setup_new_group_blocks(struct super_block *sb, - struct ext3_new_group_data *input) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - ext3_fsblk_t start = ext3_group_first_block_no(sb, input->group); - int reserved_gdb = ext3_bg_has_super(sb, input->group) ? - le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks) : 0; - unsigned long gdblocks = ext3_bg_num_gdb(sb, input->group); - struct buffer_head *bh; - handle_t *handle; - ext3_fsblk_t block; - ext3_grpblk_t bit; - int i; - int err = 0, err2; - - /* This transaction may be extended/restarted along the way */ - handle = ext3_journal_start_sb(sb, EXT3_MAX_TRANS_DATA); - - if (IS_ERR(handle)) - return PTR_ERR(handle); - - mutex_lock(&sbi->s_resize_lock); - if (input->group != sbi->s_groups_count) { - err = -EBUSY; - goto exit_journal; - } - - if (IS_ERR(bh = bclean(handle, sb, input->block_bitmap))) { - err = PTR_ERR(bh); - goto exit_journal; - } - - if (ext3_bg_has_super(sb, input->group)) { - ext3_debug("mark backup superblock %#04lx (+0)\n", start); - ext3_set_bit(0, bh->b_data); - } - - /* Copy all of the GDT blocks into the backup in this group */ - for (i = 0, bit = 1, block = start + 1; - i < gdblocks; i++, block++, bit++) { - struct buffer_head *gdb; - - ext3_debug("update backup group %#04lx (+%d)\n", block, bit); - - err = extend_or_restart_transaction(handle, 1, bh); - if (err) - goto exit_bh; - - gdb = sb_getblk(sb, block); - if (unlikely(!gdb)) { - err = -ENOMEM; - goto exit_bh; - } - if ((err = ext3_journal_get_write_access(handle, gdb))) { - brelse(gdb); - goto exit_bh; - } - lock_buffer(gdb); - memcpy(gdb->b_data, sbi->s_group_desc[i]->b_data, gdb->b_size); - set_buffer_uptodate(gdb); - unlock_buffer(gdb); - err = ext3_journal_dirty_metadata(handle, gdb); - if (err) { - brelse(gdb); - goto exit_bh; - } - ext3_set_bit(bit, bh->b_data); - brelse(gdb); - } - - /* Zero out all of the reserved backup group descriptor table blocks */ - for (i = 0, bit = gdblocks + 1, block = start + bit; - i < reserved_gdb; i++, block++, bit++) { - struct buffer_head *gdb; - - ext3_debug("clear reserved block %#04lx (+%d)\n", block, bit); - - err = extend_or_restart_transaction(handle, 1, bh); - if (err) - goto exit_bh; - - if (IS_ERR(gdb = bclean(handle, sb, block))) { - err = PTR_ERR(gdb); - goto exit_bh; - } - err = ext3_journal_dirty_metadata(handle, gdb); - if (err) { - brelse(gdb); - goto exit_bh; - } - ext3_set_bit(bit, bh->b_data); - brelse(gdb); - } - ext3_debug("mark block bitmap %#04x (+%ld)\n", input->block_bitmap, - input->block_bitmap - start); - ext3_set_bit(input->block_bitmap - start, bh->b_data); - ext3_debug("mark inode bitmap %#04x (+%ld)\n", input->inode_bitmap, - input->inode_bitmap - start); - ext3_set_bit(input->inode_bitmap - start, bh->b_data); - - /* Zero out all of the inode table blocks */ - for (i = 0, block = input->inode_table, bit = block - start; - i < sbi->s_itb_per_group; i++, bit++, block++) { - struct buffer_head *it; - - ext3_debug("clear inode block %#04lx (+%d)\n", block, bit); - - err = extend_or_restart_transaction(handle, 1, bh); - if (err) - goto exit_bh; - - if (IS_ERR(it = bclean(handle, sb, block))) { - err = PTR_ERR(it); - goto exit_bh; - } - err = ext3_journal_dirty_metadata(handle, it); - if (err) { - brelse(it); - goto exit_bh; - } - brelse(it); - ext3_set_bit(bit, bh->b_data); - } - - err = extend_or_restart_transaction(handle, 2, bh); - if (err) - goto exit_bh; - - mark_bitmap_end(input->blocks_count, EXT3_BLOCKS_PER_GROUP(sb), - bh->b_data); - err = ext3_journal_dirty_metadata(handle, bh); - if (err) - goto exit_bh; - brelse(bh); - - /* Mark unused entries in inode bitmap used */ - ext3_debug("clear inode bitmap %#04x (+%ld)\n", - input->inode_bitmap, input->inode_bitmap - start); - if (IS_ERR(bh = bclean(handle, sb, input->inode_bitmap))) { - err = PTR_ERR(bh); - goto exit_journal; - } - - mark_bitmap_end(EXT3_INODES_PER_GROUP(sb), EXT3_BLOCKS_PER_GROUP(sb), - bh->b_data); - err = ext3_journal_dirty_metadata(handle, bh); -exit_bh: - brelse(bh); - -exit_journal: - mutex_unlock(&sbi->s_resize_lock); - if ((err2 = ext3_journal_stop(handle)) && !err) - err = err2; - - return err; -} - -/* - * Iterate through the groups which hold BACKUP superblock/GDT copies in an - * ext3 filesystem. The counters should be initialized to 1, 5, and 7 before - * calling this for the first time. In a sparse filesystem it will be the - * sequence of powers of 3, 5, and 7: 1, 3, 5, 7, 9, 25, 27, 49, 81, ... - * For a non-sparse filesystem it will be every group: 1, 2, 3, 4, ... - */ -static unsigned ext3_list_backups(struct super_block *sb, unsigned *three, - unsigned *five, unsigned *seven) -{ - unsigned *min = three; - int mult = 3; - unsigned ret; - - if (!EXT3_HAS_RO_COMPAT_FEATURE(sb, - EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER)) { - ret = *min; - *min += 1; - return ret; - } - - if (*five < *min) { - min = five; - mult = 5; - } - if (*seven < *min) { - min = seven; - mult = 7; - } - - ret = *min; - *min *= mult; - - return ret; -} - -/* - * Check that all of the backup GDT blocks are held in the primary GDT block. - * It is assumed that they are stored in group order. Returns the number of - * groups in current filesystem that have BACKUPS, or -ve error code. - */ -static int verify_reserved_gdb(struct super_block *sb, - struct buffer_head *primary) -{ - const ext3_fsblk_t blk = primary->b_blocknr; - const unsigned long end = EXT3_SB(sb)->s_groups_count; - unsigned three = 1; - unsigned five = 5; - unsigned seven = 7; - unsigned grp; - __le32 *p = (__le32 *)primary->b_data; - int gdbackups = 0; - - while ((grp = ext3_list_backups(sb, &three, &five, &seven)) < end) { - if (le32_to_cpu(*p++) != grp * EXT3_BLOCKS_PER_GROUP(sb) + blk){ - ext3_warning(sb, __func__, - "reserved GDT "E3FSBLK - " missing grp %d ("E3FSBLK")", - blk, grp, - grp * EXT3_BLOCKS_PER_GROUP(sb) + blk); - return -EINVAL; - } - if (++gdbackups > EXT3_ADDR_PER_BLOCK(sb)) - return -EFBIG; - } - - return gdbackups; -} - -/* - * Called when we need to bring a reserved group descriptor table block into - * use from the resize inode. The primary copy of the new GDT block currently - * is an indirect block (under the double indirect block in the resize inode). - * The new backup GDT blocks will be stored as leaf blocks in this indirect - * block, in group order. Even though we know all the block numbers we need, - * we check to ensure that the resize inode has actually reserved these blocks. - * - * Don't need to update the block bitmaps because the blocks are still in use. - * - * We get all of the error cases out of the way, so that we are sure to not - * fail once we start modifying the data on disk, because JBD has no rollback. - */ -static int add_new_gdb(handle_t *handle, struct inode *inode, - struct ext3_new_group_data *input, - struct buffer_head **primary) -{ - struct super_block *sb = inode->i_sb; - struct ext3_super_block *es = EXT3_SB(sb)->s_es; - unsigned long gdb_num = input->group / EXT3_DESC_PER_BLOCK(sb); - ext3_fsblk_t gdblock = EXT3_SB(sb)->s_sbh->b_blocknr + 1 + gdb_num; - struct buffer_head **o_group_desc, **n_group_desc; - struct buffer_head *dind; - int gdbackups; - struct ext3_iloc iloc; - __le32 *data; - int err; - - if (test_opt(sb, DEBUG)) - printk(KERN_DEBUG - "EXT3-fs: ext3_add_new_gdb: adding group block %lu\n", - gdb_num); - - /* - * If we are not using the primary superblock/GDT copy don't resize, - * because the user tools have no way of handling this. Probably a - * bad time to do it anyways. - */ - if (EXT3_SB(sb)->s_sbh->b_blocknr != - le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block)) { - ext3_warning(sb, __func__, - "won't resize using backup superblock at %llu", - (unsigned long long)EXT3_SB(sb)->s_sbh->b_blocknr); - return -EPERM; - } - - *primary = sb_bread(sb, gdblock); - if (!*primary) - return -EIO; - - if ((gdbackups = verify_reserved_gdb(sb, *primary)) < 0) { - err = gdbackups; - goto exit_bh; - } - - data = EXT3_I(inode)->i_data + EXT3_DIND_BLOCK; - dind = sb_bread(sb, le32_to_cpu(*data)); - if (!dind) { - err = -EIO; - goto exit_bh; - } - - data = (__le32 *)dind->b_data; - if (le32_to_cpu(data[gdb_num % EXT3_ADDR_PER_BLOCK(sb)]) != gdblock) { - ext3_warning(sb, __func__, - "new group %u GDT block "E3FSBLK" not reserved", - input->group, gdblock); - err = -EINVAL; - goto exit_dind; - } - - if ((err = ext3_journal_get_write_access(handle, EXT3_SB(sb)->s_sbh))) - goto exit_dind; - - if ((err = ext3_journal_get_write_access(handle, *primary))) - goto exit_sbh; - - if ((err = ext3_journal_get_write_access(handle, dind))) - goto exit_primary; - - /* ext3_reserve_inode_write() gets a reference on the iloc */ - if ((err = ext3_reserve_inode_write(handle, inode, &iloc))) - goto exit_dindj; - - n_group_desc = kmalloc((gdb_num + 1) * sizeof(struct buffer_head *), - GFP_NOFS); - if (!n_group_desc) { - err = -ENOMEM; - ext3_warning (sb, __func__, - "not enough memory for %lu groups", gdb_num + 1); - goto exit_inode; - } - - /* - * Finally, we have all of the possible failures behind us... - * - * Remove new GDT block from inode double-indirect block and clear out - * the new GDT block for use (which also "frees" the backup GDT blocks - * from the reserved inode). We don't need to change the bitmaps for - * these blocks, because they are marked as in-use from being in the - * reserved inode, and will become GDT blocks (primary and backup). - */ - data[gdb_num % EXT3_ADDR_PER_BLOCK(sb)] = 0; - err = ext3_journal_dirty_metadata(handle, dind); - if (err) - goto exit_group_desc; - brelse(dind); - dind = NULL; - inode->i_blocks -= (gdbackups + 1) * sb->s_blocksize >> 9; - err = ext3_mark_iloc_dirty(handle, inode, &iloc); - if (err) - goto exit_group_desc; - memset((*primary)->b_data, 0, sb->s_blocksize); - err = ext3_journal_dirty_metadata(handle, *primary); - if (err) - goto exit_group_desc; - - o_group_desc = EXT3_SB(sb)->s_group_desc; - memcpy(n_group_desc, o_group_desc, - EXT3_SB(sb)->s_gdb_count * sizeof(struct buffer_head *)); - n_group_desc[gdb_num] = *primary; - EXT3_SB(sb)->s_group_desc = n_group_desc; - EXT3_SB(sb)->s_gdb_count++; - kfree(o_group_desc); - - le16_add_cpu(&es->s_reserved_gdt_blocks, -1); - err = ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh); - if (err) - goto exit_inode; - - return 0; - -exit_group_desc: - kfree(n_group_desc); -exit_inode: - //ext3_journal_release_buffer(handle, iloc.bh); - brelse(iloc.bh); -exit_dindj: - //ext3_journal_release_buffer(handle, dind); -exit_primary: - //ext3_journal_release_buffer(handle, *primary); -exit_sbh: - //ext3_journal_release_buffer(handle, *primary); -exit_dind: - brelse(dind); -exit_bh: - brelse(*primary); - - ext3_debug("leaving with error %d\n", err); - return err; -} - -/* - * Called when we are adding a new group which has a backup copy of each of - * the GDT blocks (i.e. sparse group) and there are reserved GDT blocks. - * We need to add these reserved backup GDT blocks to the resize inode, so - * that they are kept for future resizing and not allocated to files. - * - * Each reserved backup GDT block will go into a different indirect block. - * The indirect blocks are actually the primary reserved GDT blocks, - * so we know in advance what their block numbers are. We only get the - * double-indirect block to verify it is pointing to the primary reserved - * GDT blocks so we don't overwrite a data block by accident. The reserved - * backup GDT blocks are stored in their reserved primary GDT block. - */ -static int reserve_backup_gdb(handle_t *handle, struct inode *inode, - struct ext3_new_group_data *input) -{ - struct super_block *sb = inode->i_sb; - int reserved_gdb =le16_to_cpu(EXT3_SB(sb)->s_es->s_reserved_gdt_blocks); - struct buffer_head **primary; - struct buffer_head *dind; - struct ext3_iloc iloc; - ext3_fsblk_t blk; - __le32 *data, *end; - int gdbackups = 0; - int res, i; - int err; - - primary = kmalloc(reserved_gdb * sizeof(*primary), GFP_NOFS); - if (!primary) - return -ENOMEM; - - data = EXT3_I(inode)->i_data + EXT3_DIND_BLOCK; - dind = sb_bread(sb, le32_to_cpu(*data)); - if (!dind) { - err = -EIO; - goto exit_free; - } - - blk = EXT3_SB(sb)->s_sbh->b_blocknr + 1 + EXT3_SB(sb)->s_gdb_count; - data = (__le32 *)dind->b_data + (EXT3_SB(sb)->s_gdb_count % - EXT3_ADDR_PER_BLOCK(sb)); - end = (__le32 *)dind->b_data + EXT3_ADDR_PER_BLOCK(sb); - - /* Get each reserved primary GDT block and verify it holds backups */ - for (res = 0; res < reserved_gdb; res++, blk++) { - if (le32_to_cpu(*data) != blk) { - ext3_warning(sb, __func__, - "reserved block "E3FSBLK - " not at offset %ld", - blk, - (long)(data - (__le32 *)dind->b_data)); - err = -EINVAL; - goto exit_bh; - } - primary[res] = sb_bread(sb, blk); - if (!primary[res]) { - err = -EIO; - goto exit_bh; - } - if ((gdbackups = verify_reserved_gdb(sb, primary[res])) < 0) { - brelse(primary[res]); - err = gdbackups; - goto exit_bh; - } - if (++data >= end) - data = (__le32 *)dind->b_data; - } - - for (i = 0; i < reserved_gdb; i++) { - if ((err = ext3_journal_get_write_access(handle, primary[i]))) { - /* - int j; - for (j = 0; j < i; j++) - ext3_journal_release_buffer(handle, primary[j]); - */ - goto exit_bh; - } - } - - if ((err = ext3_reserve_inode_write(handle, inode, &iloc))) - goto exit_bh; - - /* - * Finally we can add each of the reserved backup GDT blocks from - * the new group to its reserved primary GDT block. - */ - blk = input->group * EXT3_BLOCKS_PER_GROUP(sb); - for (i = 0; i < reserved_gdb; i++) { - int err2; - data = (__le32 *)primary[i]->b_data; - /* printk("reserving backup %lu[%u] = %lu\n", - primary[i]->b_blocknr, gdbackups, - blk + primary[i]->b_blocknr); */ - data[gdbackups] = cpu_to_le32(blk + primary[i]->b_blocknr); - err2 = ext3_journal_dirty_metadata(handle, primary[i]); - if (!err) - err = err2; - } - inode->i_blocks += reserved_gdb * sb->s_blocksize >> 9; - ext3_mark_iloc_dirty(handle, inode, &iloc); - -exit_bh: - while (--res >= 0) - brelse(primary[res]); - brelse(dind); - -exit_free: - kfree(primary); - - return err; -} - -/* - * Update the backup copies of the ext3 metadata. These don't need to be part - * of the main resize transaction, because e2fsck will re-write them if there - * is a problem (basically only OOM will cause a problem). However, we - * _should_ update the backups if possible, in case the primary gets trashed - * for some reason and we need to run e2fsck from a backup superblock. The - * important part is that the new block and inode counts are in the backup - * superblocks, and the location of the new group metadata in the GDT backups. - * - * We do not need take the s_resize_lock for this, because these - * blocks are not otherwise touched by the filesystem code when it is - * mounted. We don't need to worry about last changing from - * sbi->s_groups_count, because the worst that can happen is that we - * do not copy the full number of backups at this time. The resize - * which changed s_groups_count will backup again. - */ -static void update_backups(struct super_block *sb, - int blk_off, char *data, int size) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - const unsigned long last = sbi->s_groups_count; - const int bpg = EXT3_BLOCKS_PER_GROUP(sb); - unsigned three = 1; - unsigned five = 5; - unsigned seven = 7; - unsigned group; - int rest = sb->s_blocksize - size; - handle_t *handle; - int err = 0, err2; - - handle = ext3_journal_start_sb(sb, EXT3_MAX_TRANS_DATA); - if (IS_ERR(handle)) { - group = 1; - err = PTR_ERR(handle); - goto exit_err; - } - - while ((group = ext3_list_backups(sb, &three, &five, &seven)) < last) { - struct buffer_head *bh; - - /* Out of journal space, and can't get more - abort - so sad */ - if (handle->h_buffer_credits == 0 && - ext3_journal_extend(handle, EXT3_MAX_TRANS_DATA) && - (err = ext3_journal_restart(handle, EXT3_MAX_TRANS_DATA))) - break; - - bh = sb_getblk(sb, group * bpg + blk_off); - if (unlikely(!bh)) { - err = -ENOMEM; - break; - } - ext3_debug("update metadata backup %#04lx\n", - (unsigned long)bh->b_blocknr); - if ((err = ext3_journal_get_write_access(handle, bh))) { - brelse(bh); - break; - } - lock_buffer(bh); - memcpy(bh->b_data, data, size); - if (rest) - memset(bh->b_data + size, 0, rest); - set_buffer_uptodate(bh); - unlock_buffer(bh); - err = ext3_journal_dirty_metadata(handle, bh); - brelse(bh); - if (err) - break; - } - if ((err2 = ext3_journal_stop(handle)) && !err) - err = err2; - - /* - * Ugh! Need to have e2fsck write the backup copies. It is too - * late to revert the resize, we shouldn't fail just because of - * the backup copies (they are only needed in case of corruption). - * - * However, if we got here we have a journal problem too, so we - * can't really start a transaction to mark the superblock. - * Chicken out and just set the flag on the hope it will be written - * to disk, and if not - we will simply wait until next fsck. - */ -exit_err: - if (err) { - ext3_warning(sb, __func__, - "can't update backup for group %d (err %d), " - "forcing fsck on next reboot", group, err); - sbi->s_mount_state &= ~EXT3_VALID_FS; - sbi->s_es->s_state &= cpu_to_le16(~EXT3_VALID_FS); - mark_buffer_dirty(sbi->s_sbh); - } -} - -/* Add group descriptor data to an existing or new group descriptor block. - * Ensure we handle all possible error conditions _before_ we start modifying - * the filesystem, because we cannot abort the transaction and not have it - * write the data to disk. - * - * If we are on a GDT block boundary, we need to get the reserved GDT block. - * Otherwise, we may need to add backup GDT blocks for a sparse group. - * - * We only need to hold the superblock lock while we are actually adding - * in the new group's counts to the superblock. Prior to that we have - * not really "added" the group at all. We re-check that we are still - * adding in the last group in case things have changed since verifying. - */ -int ext3_group_add(struct super_block *sb, struct ext3_new_group_data *input) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - struct ext3_super_block *es = sbi->s_es; - int reserved_gdb = ext3_bg_has_super(sb, input->group) ? - le16_to_cpu(es->s_reserved_gdt_blocks) : 0; - struct buffer_head *primary = NULL; - struct ext3_group_desc *gdp; - struct inode *inode = NULL; - handle_t *handle; - int gdb_off, gdb_num; - int err, err2; - - gdb_num = input->group / EXT3_DESC_PER_BLOCK(sb); - gdb_off = input->group % EXT3_DESC_PER_BLOCK(sb); - - if (gdb_off == 0 && !EXT3_HAS_RO_COMPAT_FEATURE(sb, - EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER)) { - ext3_warning(sb, __func__, - "Can't resize non-sparse filesystem further"); - return -EPERM; - } - - if (le32_to_cpu(es->s_blocks_count) + input->blocks_count < - le32_to_cpu(es->s_blocks_count)) { - ext3_warning(sb, __func__, "blocks_count overflow\n"); - return -EINVAL; - } - - if (le32_to_cpu(es->s_inodes_count) + EXT3_INODES_PER_GROUP(sb) < - le32_to_cpu(es->s_inodes_count)) { - ext3_warning(sb, __func__, "inodes_count overflow\n"); - return -EINVAL; - } - - if (reserved_gdb || gdb_off == 0) { - if (!EXT3_HAS_COMPAT_FEATURE(sb, - EXT3_FEATURE_COMPAT_RESIZE_INODE) - || !le16_to_cpu(es->s_reserved_gdt_blocks)) { - ext3_warning(sb, __func__, - "No reserved GDT blocks, can't resize"); - return -EPERM; - } - inode = ext3_iget(sb, EXT3_RESIZE_INO); - if (IS_ERR(inode)) { - ext3_warning(sb, __func__, - "Error opening resize inode"); - return PTR_ERR(inode); - } - } - - if ((err = verify_group_input(sb, input))) - goto exit_put; - - if ((err = setup_new_group_blocks(sb, input))) - goto exit_put; - - /* - * We will always be modifying at least the superblock and a GDT - * block. If we are adding a group past the last current GDT block, - * we will also modify the inode and the dindirect block. If we - * are adding a group with superblock/GDT backups we will also - * modify each of the reserved GDT dindirect blocks. - */ - handle = ext3_journal_start_sb(sb, - ext3_bg_has_super(sb, input->group) ? - 3 + reserved_gdb : 4); - if (IS_ERR(handle)) { - err = PTR_ERR(handle); - goto exit_put; - } - - mutex_lock(&sbi->s_resize_lock); - if (input->group != sbi->s_groups_count) { - ext3_warning(sb, __func__, - "multiple resizers run on filesystem!"); - err = -EBUSY; - goto exit_journal; - } - - if ((err = ext3_journal_get_write_access(handle, sbi->s_sbh))) - goto exit_journal; - - /* - * We will only either add reserved group blocks to a backup group - * or remove reserved blocks for the first group in a new group block. - * Doing both would be mean more complex code, and sane people don't - * use non-sparse filesystems anymore. This is already checked above. - */ - if (gdb_off) { - primary = sbi->s_group_desc[gdb_num]; - if ((err = ext3_journal_get_write_access(handle, primary))) - goto exit_journal; - - if (reserved_gdb && ext3_bg_num_gdb(sb, input->group) && - (err = reserve_backup_gdb(handle, inode, input))) - goto exit_journal; - } else if ((err = add_new_gdb(handle, inode, input, &primary))) - goto exit_journal; - - /* - * OK, now we've set up the new group. Time to make it active. - * - * We do not lock all allocations via s_resize_lock - * so we have to be safe wrt. concurrent accesses the group - * data. So we need to be careful to set all of the relevant - * group descriptor data etc. *before* we enable the group. - * - * The key field here is sbi->s_groups_count: as long as - * that retains its old value, nobody is going to access the new - * group. - * - * So first we update all the descriptor metadata for the new - * group; then we update the total disk blocks count; then we - * update the groups count to enable the group; then finally we - * update the free space counts so that the system can start - * using the new disk blocks. - */ - - /* Update group descriptor block for new group */ - gdp = (struct ext3_group_desc *)primary->b_data + gdb_off; - - gdp->bg_block_bitmap = cpu_to_le32(input->block_bitmap); - gdp->bg_inode_bitmap = cpu_to_le32(input->inode_bitmap); - gdp->bg_inode_table = cpu_to_le32(input->inode_table); - gdp->bg_free_blocks_count = cpu_to_le16(input->free_blocks_count); - gdp->bg_free_inodes_count = cpu_to_le16(EXT3_INODES_PER_GROUP(sb)); - - /* - * Make the new blocks and inodes valid next. We do this before - * increasing the group count so that once the group is enabled, - * all of its blocks and inodes are already valid. - * - * We always allocate group-by-group, then block-by-block or - * inode-by-inode within a group, so enabling these - * blocks/inodes before the group is live won't actually let us - * allocate the new space yet. - */ - le32_add_cpu(&es->s_blocks_count, input->blocks_count); - le32_add_cpu(&es->s_inodes_count, EXT3_INODES_PER_GROUP(sb)); - - /* - * We need to protect s_groups_count against other CPUs seeing - * inconsistent state in the superblock. - * - * The precise rules we use are: - * - * * Writers of s_groups_count *must* hold s_resize_lock - * AND - * * Writers must perform a smp_wmb() after updating all dependent - * data and before modifying the groups count - * - * * Readers must hold s_resize_lock over the access - * OR - * * Readers must perform an smp_rmb() after reading the groups count - * and before reading any dependent data. - * - * NB. These rules can be relaxed when checking the group count - * while freeing data, as we can only allocate from a block - * group after serialising against the group count, and we can - * only then free after serialising in turn against that - * allocation. - */ - smp_wmb(); - - /* Update the global fs size fields */ - sbi->s_groups_count++; - - err = ext3_journal_dirty_metadata(handle, primary); - if (err) - goto exit_journal; - - /* Update the reserved block counts only once the new group is - * active. */ - le32_add_cpu(&es->s_r_blocks_count, input->reserved_blocks); - - /* Update the free space counts */ - percpu_counter_add(&sbi->s_freeblocks_counter, - input->free_blocks_count); - percpu_counter_add(&sbi->s_freeinodes_counter, - EXT3_INODES_PER_GROUP(sb)); - - err = ext3_journal_dirty_metadata(handle, sbi->s_sbh); - -exit_journal: - mutex_unlock(&sbi->s_resize_lock); - if ((err2 = ext3_journal_stop(handle)) && !err) - err = err2; - if (!err) { - update_backups(sb, sbi->s_sbh->b_blocknr, (char *)es, - sizeof(struct ext3_super_block)); - update_backups(sb, primary->b_blocknr, primary->b_data, - primary->b_size); - } -exit_put: - iput(inode); - return err; -} /* ext3_group_add */ - -/* Extend the filesystem to the new number of blocks specified. This entry - * point is only used to extend the current filesystem to the end of the last - * existing group. It can be accessed via ioctl, or by "remount,resize=<size>" - * for emergencies (because it has no dependencies on reserved blocks). - * - * If we _really_ wanted, we could use default values to call ext3_group_add() - * allow the "remount" trick to work for arbitrary resizing, assuming enough - * GDT blocks are reserved to grow to the desired size. - */ -int ext3_group_extend(struct super_block *sb, struct ext3_super_block *es, - ext3_fsblk_t n_blocks_count) -{ - ext3_fsblk_t o_blocks_count; - ext3_grpblk_t last; - ext3_grpblk_t add; - struct buffer_head * bh; - handle_t *handle; - int err; - unsigned long freed_blocks; - - /* We don't need to worry about locking wrt other resizers just - * yet: we're going to revalidate es->s_blocks_count after - * taking the s_resize_lock below. */ - o_blocks_count = le32_to_cpu(es->s_blocks_count); - - if (test_opt(sb, DEBUG)) - printk(KERN_DEBUG "EXT3-fs: extending last group from "E3FSBLK - " up to "E3FSBLK" blocks\n", - o_blocks_count, n_blocks_count); - - if (n_blocks_count == 0 || n_blocks_count == o_blocks_count) - return 0; - - if (n_blocks_count > (sector_t)(~0ULL) >> (sb->s_blocksize_bits - 9)) { - printk(KERN_ERR "EXT3-fs: filesystem on %s:" - " too large to resize to "E3FSBLK" blocks safely\n", - sb->s_id, n_blocks_count); - if (sizeof(sector_t) < 8) - ext3_warning(sb, __func__, - "CONFIG_LBDAF not enabled\n"); - return -EINVAL; - } - - if (n_blocks_count < o_blocks_count) { - ext3_warning(sb, __func__, - "can't shrink FS - resize aborted"); - return -EBUSY; - } - - /* Handle the remaining blocks in the last group only. */ - last = (o_blocks_count - le32_to_cpu(es->s_first_data_block)) % - EXT3_BLOCKS_PER_GROUP(sb); - - if (last == 0) { - ext3_warning(sb, __func__, - "need to use ext2online to resize further"); - return -EPERM; - } - - add = EXT3_BLOCKS_PER_GROUP(sb) - last; - - if (o_blocks_count + add < o_blocks_count) { - ext3_warning(sb, __func__, "blocks_count overflow"); - return -EINVAL; - } - - if (o_blocks_count + add > n_blocks_count) - add = n_blocks_count - o_blocks_count; - - if (o_blocks_count + add < n_blocks_count) - ext3_warning(sb, __func__, - "will only finish group ("E3FSBLK - " blocks, %u new)", - o_blocks_count + add, add); - - /* See if the device is actually as big as what was requested */ - bh = sb_bread(sb, o_blocks_count + add -1); - if (!bh) { - ext3_warning(sb, __func__, - "can't read last block, resize aborted"); - return -ENOSPC; - } - brelse(bh); - - /* We will update the superblock, one block bitmap, and - * one group descriptor via ext3_free_blocks(). - */ - handle = ext3_journal_start_sb(sb, 3); - if (IS_ERR(handle)) { - err = PTR_ERR(handle); - ext3_warning(sb, __func__, "error %d on journal start",err); - goto exit_put; - } - - mutex_lock(&EXT3_SB(sb)->s_resize_lock); - if (o_blocks_count != le32_to_cpu(es->s_blocks_count)) { - ext3_warning(sb, __func__, - "multiple resizers run on filesystem!"); - mutex_unlock(&EXT3_SB(sb)->s_resize_lock); - ext3_journal_stop(handle); - err = -EBUSY; - goto exit_put; - } - - if ((err = ext3_journal_get_write_access(handle, - EXT3_SB(sb)->s_sbh))) { - ext3_warning(sb, __func__, - "error %d on journal write access", err); - mutex_unlock(&EXT3_SB(sb)->s_resize_lock); - ext3_journal_stop(handle); - goto exit_put; - } - es->s_blocks_count = cpu_to_le32(o_blocks_count + add); - err = ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh); - mutex_unlock(&EXT3_SB(sb)->s_resize_lock); - if (err) { - ext3_warning(sb, __func__, - "error %d on journal dirty metadata", err); - ext3_journal_stop(handle); - goto exit_put; - } - ext3_debug("freeing blocks "E3FSBLK" through "E3FSBLK"\n", - o_blocks_count, o_blocks_count + add); - ext3_free_blocks_sb(handle, sb, o_blocks_count, add, &freed_blocks); - ext3_debug("freed blocks "E3FSBLK" through "E3FSBLK"\n", - o_blocks_count, o_blocks_count + add); - if ((err = ext3_journal_stop(handle))) - goto exit_put; - if (test_opt(sb, DEBUG)) - printk(KERN_DEBUG "EXT3-fs: extended group to %u blocks\n", - le32_to_cpu(es->s_blocks_count)); - update_backups(sb, EXT3_SB(sb)->s_sbh->b_blocknr, (char *)es, - sizeof(struct ext3_super_block)); -exit_put: - return err; -} /* ext3_group_extend */ diff --git a/fs/ext3/super.c b/fs/ext3/super.c deleted file mode 100644 index 5ed0044..0000000 --- a/fs/ext3/super.c +++ /dev/null @@ -1,3165 +0,0 @@ -/* - * linux/fs/ext3/super.c - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/fs/minix/inode.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * Big-endian to little-endian byte-swapping/bitmaps by - * David S. Miller (davem@caip.rutgers.edu), 1995 - */ - -#include <linux/module.h> -#include <linux/blkdev.h> -#include <linux/parser.h> -#include <linux/exportfs.h> -#include <linux/statfs.h> -#include <linux/random.h> -#include <linux/mount.h> -#include <linux/quotaops.h> -#include <linux/seq_file.h> -#include <linux/log2.h> -#include <linux/cleancache.h> -#include <linux/namei.h> - -#include <asm/uaccess.h> - -#define CREATE_TRACE_POINTS - -#include "ext3.h" -#include "xattr.h" -#include "acl.h" -#include "namei.h" - -#ifdef CONFIG_EXT3_DEFAULTS_TO_ORDERED - #define EXT3_MOUNT_DEFAULT_DATA_MODE EXT3_MOUNT_ORDERED_DATA -#else - #define EXT3_MOUNT_DEFAULT_DATA_MODE EXT3_MOUNT_WRITEBACK_DATA -#endif - -static int ext3_load_journal(struct super_block *, struct ext3_super_block *, - unsigned long journal_devnum); -static int ext3_create_journal(struct super_block *, struct ext3_super_block *, - unsigned int); -static int ext3_commit_super(struct super_block *sb, - struct ext3_super_block *es, - int sync); -static void ext3_mark_recovery_complete(struct super_block * sb, - struct ext3_super_block * es); -static void ext3_clear_journal_err(struct super_block * sb, - struct ext3_super_block * es); -static int ext3_sync_fs(struct super_block *sb, int wait); -static const char *ext3_decode_error(struct super_block * sb, int errno, - char nbuf[16]); -static int ext3_remount (struct super_block * sb, int * flags, char * data); -static int ext3_statfs (struct dentry * dentry, struct kstatfs * buf); -static int ext3_unfreeze(struct super_block *sb); -static int ext3_freeze(struct super_block *sb); - -/* - * Wrappers for journal_start/end. - */ -handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks) -{ - journal_t *journal; - - if (sb->s_flags & MS_RDONLY) - return ERR_PTR(-EROFS); - - /* Special case here: if the journal has aborted behind our - * backs (eg. EIO in the commit thread), then we still need to - * take the FS itself readonly cleanly. */ - journal = EXT3_SB(sb)->s_journal; - if (is_journal_aborted(journal)) { - ext3_abort(sb, __func__, - "Detected aborted journal"); - return ERR_PTR(-EROFS); - } - - return journal_start(journal, nblocks); -} - -int __ext3_journal_stop(const char *where, handle_t *handle) -{ - struct super_block *sb; - int err; - int rc; - - sb = handle->h_transaction->t_journal->j_private; - err = handle->h_err; - rc = journal_stop(handle); - - if (!err) - err = rc; - if (err) - __ext3_std_error(sb, where, err); - return err; -} - -void ext3_journal_abort_handle(const char *caller, const char *err_fn, - struct buffer_head *bh, handle_t *handle, int err) -{ - char nbuf[16]; - const char *errstr = ext3_decode_error(NULL, err, nbuf); - - if (bh) - BUFFER_TRACE(bh, "abort"); - - if (!handle->h_err) - handle->h_err = err; - - if (is_handle_aborted(handle)) - return; - - printk(KERN_ERR "EXT3-fs: %s: aborting transaction: %s in %s\n", - caller, errstr, err_fn); - - journal_abort_handle(handle); -} - -void ext3_msg(struct super_block *sb, const char *prefix, - const char *fmt, ...) -{ - struct va_format vaf; - va_list args; - - va_start(args, fmt); - - vaf.fmt = fmt; - vaf.va = &args; - - printk("%sEXT3-fs (%s): %pV\n", prefix, sb->s_id, &vaf); - - va_end(args); -} - -/* Deal with the reporting of failure conditions on a filesystem such as - * inconsistencies detected or read IO failures. - * - * On ext2, we can store the error state of the filesystem in the - * superblock. That is not possible on ext3, because we may have other - * write ordering constraints on the superblock which prevent us from - * writing it out straight away; and given that the journal is about to - * be aborted, we can't rely on the current, or future, transactions to - * write out the superblock safely. - * - * We'll just use the journal_abort() error code to record an error in - * the journal instead. On recovery, the journal will complain about - * that error until we've noted it down and cleared it. - */ - -static void ext3_handle_error(struct super_block *sb) -{ - struct ext3_super_block *es = EXT3_SB(sb)->s_es; - - EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS; - es->s_state |= cpu_to_le16(EXT3_ERROR_FS); - - if (sb->s_flags & MS_RDONLY) - return; - - if (!test_opt (sb, ERRORS_CONT)) { - journal_t *journal = EXT3_SB(sb)->s_journal; - - set_opt(EXT3_SB(sb)->s_mount_opt, ABORT); - if (journal) - journal_abort(journal, -EIO); - } - if (test_opt (sb, ERRORS_RO)) { - ext3_msg(sb, KERN_CRIT, - "error: remounting filesystem read-only"); - /* - * Make sure updated value of ->s_mount_state will be visible - * before ->s_flags update. - */ - smp_wmb(); - sb->s_flags |= MS_RDONLY; - } - ext3_commit_super(sb, es, 1); - if (test_opt(sb, ERRORS_PANIC)) - panic("EXT3-fs (%s): panic forced after error\n", - sb->s_id); -} - -void ext3_error(struct super_block *sb, const char *function, - const char *fmt, ...) -{ - struct va_format vaf; - va_list args; - - va_start(args, fmt); - - vaf.fmt = fmt; - vaf.va = &args; - - printk(KERN_CRIT "EXT3-fs error (device %s): %s: %pV\n", - sb->s_id, function, &vaf); - - va_end(args); - - ext3_handle_error(sb); -} - -static const char *ext3_decode_error(struct super_block * sb, int errno, - char nbuf[16]) -{ - char *errstr = NULL; - - switch (errno) { - case -EIO: - errstr = "IO failure"; - break; - case -ENOMEM: - errstr = "Out of memory"; - break; - case -EROFS: - if (!sb || EXT3_SB(sb)->s_journal->j_flags & JFS_ABORT) - errstr = "Journal has aborted"; - else - errstr = "Readonly filesystem"; - break; - default: - /* If the caller passed in an extra buffer for unknown - * errors, textualise them now. Else we just return - * NULL. */ - if (nbuf) { - /* Check for truncated error codes... */ - if (snprintf(nbuf, 16, "error %d", -errno) >= 0) - errstr = nbuf; - } - break; - } - - return errstr; -} - -/* __ext3_std_error decodes expected errors from journaling functions - * automatically and invokes the appropriate error response. */ - -void __ext3_std_error (struct super_block * sb, const char * function, - int errno) -{ - char nbuf[16]; - const char *errstr; - - /* Special case: if the error is EROFS, and we're not already - * inside a transaction, then there's really no point in logging - * an error. */ - if (errno == -EROFS && journal_current_handle() == NULL && - (sb->s_flags & MS_RDONLY)) - return; - - errstr = ext3_decode_error(sb, errno, nbuf); - ext3_msg(sb, KERN_CRIT, "error in %s: %s", function, errstr); - - ext3_handle_error(sb); -} - -/* - * ext3_abort is a much stronger failure handler than ext3_error. The - * abort function may be used to deal with unrecoverable failures such - * as journal IO errors or ENOMEM at a critical moment in log management. - * - * We unconditionally force the filesystem into an ABORT|READONLY state, - * unless the error response on the fs has been set to panic in which - * case we take the easy way out and panic immediately. - */ - -void ext3_abort(struct super_block *sb, const char *function, - const char *fmt, ...) -{ - struct va_format vaf; - va_list args; - - va_start(args, fmt); - - vaf.fmt = fmt; - vaf.va = &args; - - printk(KERN_CRIT "EXT3-fs (%s): error: %s: %pV\n", - sb->s_id, function, &vaf); - - va_end(args); - - if (test_opt(sb, ERRORS_PANIC)) - panic("EXT3-fs: panic from previous error\n"); - - if (sb->s_flags & MS_RDONLY) - return; - - ext3_msg(sb, KERN_CRIT, - "error: remounting filesystem read-only"); - EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS; - set_opt(EXT3_SB(sb)->s_mount_opt, ABORT); - /* - * Make sure updated value of ->s_mount_state will be visible - * before ->s_flags update. - */ - smp_wmb(); - sb->s_flags |= MS_RDONLY; - - if (EXT3_SB(sb)->s_journal) - journal_abort(EXT3_SB(sb)->s_journal, -EIO); -} - -void ext3_warning(struct super_block *sb, const char *function, - const char *fmt, ...) -{ - struct va_format vaf; - va_list args; - - va_start(args, fmt); - - vaf.fmt = fmt; - vaf.va = &args; - - printk(KERN_WARNING "EXT3-fs (%s): warning: %s: %pV\n", - sb->s_id, function, &vaf); - - va_end(args); -} - -void ext3_update_dynamic_rev(struct super_block *sb) -{ - struct ext3_super_block *es = EXT3_SB(sb)->s_es; - - if (le32_to_cpu(es->s_rev_level) > EXT3_GOOD_OLD_REV) - return; - - ext3_msg(sb, KERN_WARNING, - "warning: updating to rev %d because of " - "new feature flag, running e2fsck is recommended", - EXT3_DYNAMIC_REV); - - es->s_first_ino = cpu_to_le32(EXT3_GOOD_OLD_FIRST_INO); - es->s_inode_size = cpu_to_le16(EXT3_GOOD_OLD_INODE_SIZE); - es->s_rev_level = cpu_to_le32(EXT3_DYNAMIC_REV); - /* leave es->s_feature_*compat flags alone */ - /* es->s_uuid will be set by e2fsck if empty */ - - /* - * The rest of the superblock fields should be zero, and if not it - * means they are likely already in use, so leave them alone. We - * can leave it up to e2fsck to clean up any inconsistencies there. - */ -} - -/* - * Open the external journal device - */ -static struct block_device *ext3_blkdev_get(dev_t dev, struct super_block *sb) -{ - struct block_device *bdev; - char b[BDEVNAME_SIZE]; - - bdev = blkdev_get_by_dev(dev, FMODE_READ|FMODE_WRITE|FMODE_EXCL, sb); - if (IS_ERR(bdev)) - goto fail; - return bdev; - -fail: - ext3_msg(sb, KERN_ERR, "error: failed to open journal device %s: %ld", - __bdevname(dev, b), PTR_ERR(bdev)); - - return NULL; -} - -/* - * Release the journal device - */ -static void ext3_blkdev_put(struct block_device *bdev) -{ - blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL); -} - -static void ext3_blkdev_remove(struct ext3_sb_info *sbi) -{ - struct block_device *bdev; - bdev = sbi->journal_bdev; - if (bdev) { - ext3_blkdev_put(bdev); - sbi->journal_bdev = NULL; - } -} - -static inline struct inode *orphan_list_entry(struct list_head *l) -{ - return &list_entry(l, struct ext3_inode_info, i_orphan)->vfs_inode; -} - -static void dump_orphan_list(struct super_block *sb, struct ext3_sb_info *sbi) -{ - struct list_head *l; - - ext3_msg(sb, KERN_ERR, "error: sb orphan head is %d", - le32_to_cpu(sbi->s_es->s_last_orphan)); - - ext3_msg(sb, KERN_ERR, "sb_info orphan list:"); - list_for_each(l, &sbi->s_orphan) { - struct inode *inode = orphan_list_entry(l); - ext3_msg(sb, KERN_ERR, " " - "inode %s:%lu at %p: mode %o, nlink %d, next %d\n", - inode->i_sb->s_id, inode->i_ino, inode, - inode->i_mode, inode->i_nlink, - NEXT_ORPHAN(inode)); - } -} - -static void ext3_put_super (struct super_block * sb) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - struct ext3_super_block *es = sbi->s_es; - int i, err; - - dquot_disable(sb, -1, DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED); - ext3_xattr_put_super(sb); - err = journal_destroy(sbi->s_journal); - sbi->s_journal = NULL; - if (err < 0) - ext3_abort(sb, __func__, "Couldn't clean up the journal"); - - if (!(sb->s_flags & MS_RDONLY)) { - EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); - es->s_state = cpu_to_le16(sbi->s_mount_state); - BUFFER_TRACE(sbi->s_sbh, "marking dirty"); - mark_buffer_dirty(sbi->s_sbh); - ext3_commit_super(sb, es, 1); - } - - for (i = 0; i < sbi->s_gdb_count; i++) - brelse(sbi->s_group_desc[i]); - kfree(sbi->s_group_desc); - percpu_counter_destroy(&sbi->s_freeblocks_counter); - percpu_counter_destroy(&sbi->s_freeinodes_counter); - percpu_counter_destroy(&sbi->s_dirs_counter); - brelse(sbi->s_sbh); -#ifdef CONFIG_QUOTA - for (i = 0; i < EXT3_MAXQUOTAS; i++) - kfree(sbi->s_qf_names[i]); -#endif - - /* Debugging code just in case the in-memory inode orphan list - * isn't empty. The on-disk one can be non-empty if we've - * detected an error and taken the fs readonly, but the - * in-memory list had better be clean by this point. */ - if (!list_empty(&sbi->s_orphan)) - dump_orphan_list(sb, sbi); - J_ASSERT(list_empty(&sbi->s_orphan)); - - invalidate_bdev(sb->s_bdev); - if (sbi->journal_bdev && sbi->journal_bdev != sb->s_bdev) { - /* - * Invalidate the journal device's buffers. We don't want them - * floating about in memory - the physical journal device may - * hotswapped, and it breaks the `ro-after' testing code. - */ - sync_blockdev(sbi->journal_bdev); - invalidate_bdev(sbi->journal_bdev); - ext3_blkdev_remove(sbi); - } - sb->s_fs_info = NULL; - kfree(sbi->s_blockgroup_lock); - mutex_destroy(&sbi->s_orphan_lock); - mutex_destroy(&sbi->s_resize_lock); - kfree(sbi); -} - -static struct kmem_cache *ext3_inode_cachep; - -/* - * Called inside transaction, so use GFP_NOFS - */ -static struct inode *ext3_alloc_inode(struct super_block *sb) -{ - struct ext3_inode_info *ei; - - ei = kmem_cache_alloc(ext3_inode_cachep, GFP_NOFS); - if (!ei) - return NULL; - ei->i_block_alloc_info = NULL; - ei->vfs_inode.i_version = 1; - atomic_set(&ei->i_datasync_tid, 0); - atomic_set(&ei->i_sync_tid, 0); -#ifdef CONFIG_QUOTA - memset(&ei->i_dquot, 0, sizeof(ei->i_dquot)); -#endif - - return &ei->vfs_inode; -} - -static int ext3_drop_inode(struct inode *inode) -{ - int drop = generic_drop_inode(inode); - - trace_ext3_drop_inode(inode, drop); - return drop; -} - -static void ext3_i_callback(struct rcu_head *head) -{ - struct inode *inode = container_of(head, struct inode, i_rcu); - kmem_cache_free(ext3_inode_cachep, EXT3_I(inode)); -} - -static void ext3_destroy_inode(struct inode *inode) -{ - if (!list_empty(&(EXT3_I(inode)->i_orphan))) { - printk("EXT3 Inode %p: orphan list check failed!\n", - EXT3_I(inode)); - print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 4, - EXT3_I(inode), sizeof(struct ext3_inode_info), - false); - dump_stack(); - } - call_rcu(&inode->i_rcu, ext3_i_callback); -} - -static void init_once(void *foo) -{ - struct ext3_inode_info *ei = (struct ext3_inode_info *) foo; - - INIT_LIST_HEAD(&ei->i_orphan); -#ifdef CONFIG_EXT3_FS_XATTR - init_rwsem(&ei->xattr_sem); -#endif - mutex_init(&ei->truncate_mutex); - inode_init_once(&ei->vfs_inode); -} - -static int __init init_inodecache(void) -{ - ext3_inode_cachep = kmem_cache_create("ext3_inode_cache", - sizeof(struct ext3_inode_info), - 0, (SLAB_RECLAIM_ACCOUNT| - SLAB_MEM_SPREAD), - init_once); - if (ext3_inode_cachep == NULL) - return -ENOMEM; - return 0; -} - -static void destroy_inodecache(void) -{ - /* - * Make sure all delayed rcu free inodes are flushed before we - * destroy cache. - */ - rcu_barrier(); - kmem_cache_destroy(ext3_inode_cachep); -} - -static inline void ext3_show_quota_options(struct seq_file *seq, struct super_block *sb) -{ -#if defined(CONFIG_QUOTA) - struct ext3_sb_info *sbi = EXT3_SB(sb); - - if (sbi->s_jquota_fmt) { - char *fmtname = ""; - - switch (sbi->s_jquota_fmt) { - case QFMT_VFS_OLD: - fmtname = "vfsold"; - break; - case QFMT_VFS_V0: - fmtname = "vfsv0"; - break; - case QFMT_VFS_V1: - fmtname = "vfsv1"; - break; - } - seq_printf(seq, ",jqfmt=%s", fmtname); - } - - if (sbi->s_qf_names[USRQUOTA]) - seq_printf(seq, ",usrjquota=%s", sbi->s_qf_names[USRQUOTA]); - - if (sbi->s_qf_names[GRPQUOTA]) - seq_printf(seq, ",grpjquota=%s", sbi->s_qf_names[GRPQUOTA]); - - if (test_opt(sb, USRQUOTA)) - seq_puts(seq, ",usrquota"); - - if (test_opt(sb, GRPQUOTA)) - seq_puts(seq, ",grpquota"); -#endif -} - -static char *data_mode_string(unsigned long mode) -{ - switch (mode) { - case EXT3_MOUNT_JOURNAL_DATA: - return "journal"; - case EXT3_MOUNT_ORDERED_DATA: - return "ordered"; - case EXT3_MOUNT_WRITEBACK_DATA: - return "writeback"; - } - return "unknown"; -} - -/* - * Show an option if - * - it's set to a non-default value OR - * - if the per-sb default is different from the global default - */ -static int ext3_show_options(struct seq_file *seq, struct dentry *root) -{ - struct super_block *sb = root->d_sb; - struct ext3_sb_info *sbi = EXT3_SB(sb); - struct ext3_super_block *es = sbi->s_es; - unsigned long def_mount_opts; - - def_mount_opts = le32_to_cpu(es->s_default_mount_opts); - - if (sbi->s_sb_block != 1) - seq_printf(seq, ",sb=%lu", sbi->s_sb_block); - if (test_opt(sb, MINIX_DF)) - seq_puts(seq, ",minixdf"); - if (test_opt(sb, GRPID)) - seq_puts(seq, ",grpid"); - if (!test_opt(sb, GRPID) && (def_mount_opts & EXT3_DEFM_BSDGROUPS)) - seq_puts(seq, ",nogrpid"); - if (!uid_eq(sbi->s_resuid, make_kuid(&init_user_ns, EXT3_DEF_RESUID)) || - le16_to_cpu(es->s_def_resuid) != EXT3_DEF_RESUID) { - seq_printf(seq, ",resuid=%u", - from_kuid_munged(&init_user_ns, sbi->s_resuid)); - } - if (!gid_eq(sbi->s_resgid, make_kgid(&init_user_ns, EXT3_DEF_RESGID)) || - le16_to_cpu(es->s_def_resgid) != EXT3_DEF_RESGID) { - seq_printf(seq, ",resgid=%u", - from_kgid_munged(&init_user_ns, sbi->s_resgid)); - } - if (test_opt(sb, ERRORS_RO)) { - int def_errors = le16_to_cpu(es->s_errors); - - if (def_errors == EXT3_ERRORS_PANIC || - def_errors == EXT3_ERRORS_CONTINUE) { - seq_puts(seq, ",errors=remount-ro"); - } - } - if (test_opt(sb, ERRORS_CONT)) - seq_puts(seq, ",errors=continue"); - if (test_opt(sb, ERRORS_PANIC)) - seq_puts(seq, ",errors=panic"); - if (test_opt(sb, NO_UID32)) - seq_puts(seq, ",nouid32"); - if (test_opt(sb, DEBUG)) - seq_puts(seq, ",debug"); -#ifdef CONFIG_EXT3_FS_XATTR - if (test_opt(sb, XATTR_USER)) - seq_puts(seq, ",user_xattr"); - if (!test_opt(sb, XATTR_USER) && - (def_mount_opts & EXT3_DEFM_XATTR_USER)) { - seq_puts(seq, ",nouser_xattr"); - } -#endif -#ifdef CONFIG_EXT3_FS_POSIX_ACL - if (test_opt(sb, POSIX_ACL)) - seq_puts(seq, ",acl"); - if (!test_opt(sb, POSIX_ACL) && (def_mount_opts & EXT3_DEFM_ACL)) - seq_puts(seq, ",noacl"); -#endif - if (!test_opt(sb, RESERVATION)) - seq_puts(seq, ",noreservation"); - if (sbi->s_commit_interval) { - seq_printf(seq, ",commit=%u", - (unsigned) (sbi->s_commit_interval / HZ)); - } - - /* - * Always display barrier state so it's clear what the status is. - */ - seq_puts(seq, ",barrier="); - seq_puts(seq, test_opt(sb, BARRIER) ? "1" : "0"); - seq_printf(seq, ",data=%s", data_mode_string(test_opt(sb, DATA_FLAGS))); - if (test_opt(sb, DATA_ERR_ABORT)) - seq_puts(seq, ",data_err=abort"); - - if (test_opt(sb, NOLOAD)) - seq_puts(seq, ",norecovery"); - - ext3_show_quota_options(seq, sb); - - return 0; -} - - -static struct inode *ext3_nfs_get_inode(struct super_block *sb, - u64 ino, u32 generation) -{ - struct inode *inode; - - if (ino < EXT3_FIRST_INO(sb) && ino != EXT3_ROOT_INO) - return ERR_PTR(-ESTALE); - if (ino > le32_to_cpu(EXT3_SB(sb)->s_es->s_inodes_count)) - return ERR_PTR(-ESTALE); - - /* iget isn't really right if the inode is currently unallocated!! - * - * ext3_read_inode will return a bad_inode if the inode had been - * deleted, so we should be safe. - * - * Currently we don't know the generation for parent directory, so - * a generation of 0 means "accept any" - */ - inode = ext3_iget(sb, ino); - if (IS_ERR(inode)) - return ERR_CAST(inode); - if (generation && inode->i_generation != generation) { - iput(inode); - return ERR_PTR(-ESTALE); - } - - return inode; -} - -static struct dentry *ext3_fh_to_dentry(struct super_block *sb, struct fid *fid, - int fh_len, int fh_type) -{ - return generic_fh_to_dentry(sb, fid, fh_len, fh_type, - ext3_nfs_get_inode); -} - -static struct dentry *ext3_fh_to_parent(struct super_block *sb, struct fid *fid, - int fh_len, int fh_type) -{ - return generic_fh_to_parent(sb, fid, fh_len, fh_type, - ext3_nfs_get_inode); -} - -/* - * Try to release metadata pages (indirect blocks, directories) which are - * mapped via the block device. Since these pages could have journal heads - * which would prevent try_to_free_buffers() from freeing them, we must use - * jbd layer's try_to_free_buffers() function to release them. - */ -static int bdev_try_to_free_page(struct super_block *sb, struct page *page, - gfp_t wait) -{ - journal_t *journal = EXT3_SB(sb)->s_journal; - - WARN_ON(PageChecked(page)); - if (!page_has_buffers(page)) - return 0; - if (journal) - return journal_try_to_free_buffers(journal, page, - wait & ~__GFP_WAIT); - return try_to_free_buffers(page); -} - -#ifdef CONFIG_QUOTA -#define QTYPE2NAME(t) ((t)==USRQUOTA?"user":"group") -#define QTYPE2MOPT(on, t) ((t)==USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA)) - -static int ext3_write_dquot(struct dquot *dquot); -static int ext3_acquire_dquot(struct dquot *dquot); -static int ext3_release_dquot(struct dquot *dquot); -static int ext3_mark_dquot_dirty(struct dquot *dquot); -static int ext3_write_info(struct super_block *sb, int type); -static int ext3_quota_on(struct super_block *sb, int type, int format_id, - struct path *path); -static int ext3_quota_on_mount(struct super_block *sb, int type); -static ssize_t ext3_quota_read(struct super_block *sb, int type, char *data, - size_t len, loff_t off); -static ssize_t ext3_quota_write(struct super_block *sb, int type, - const char *data, size_t len, loff_t off); -static struct dquot **ext3_get_dquots(struct inode *inode) -{ - return EXT3_I(inode)->i_dquot; -} - -static const struct dquot_operations ext3_quota_operations = { - .write_dquot = ext3_write_dquot, - .acquire_dquot = ext3_acquire_dquot, - .release_dquot = ext3_release_dquot, - .mark_dirty = ext3_mark_dquot_dirty, - .write_info = ext3_write_info, - .alloc_dquot = dquot_alloc, - .destroy_dquot = dquot_destroy, -}; - -static const struct quotactl_ops ext3_qctl_operations = { - .quota_on = ext3_quota_on, - .quota_off = dquot_quota_off, - .quota_sync = dquot_quota_sync, - .get_state = dquot_get_state, - .set_info = dquot_set_dqinfo, - .get_dqblk = dquot_get_dqblk, - .set_dqblk = dquot_set_dqblk -}; -#endif - -static const struct super_operations ext3_sops = { - .alloc_inode = ext3_alloc_inode, - .destroy_inode = ext3_destroy_inode, - .write_inode = ext3_write_inode, - .dirty_inode = ext3_dirty_inode, - .drop_inode = ext3_drop_inode, - .evict_inode = ext3_evict_inode, - .put_super = ext3_put_super, - .sync_fs = ext3_sync_fs, - .freeze_fs = ext3_freeze, - .unfreeze_fs = ext3_unfreeze, - .statfs = ext3_statfs, - .remount_fs = ext3_remount, - .show_options = ext3_show_options, -#ifdef CONFIG_QUOTA - .quota_read = ext3_quota_read, - .quota_write = ext3_quota_write, - .get_dquots = ext3_get_dquots, -#endif - .bdev_try_to_free_page = bdev_try_to_free_page, -}; - -static const struct export_operations ext3_export_ops = { - .fh_to_dentry = ext3_fh_to_dentry, - .fh_to_parent = ext3_fh_to_parent, - .get_parent = ext3_get_parent, -}; - -enum { - Opt_bsd_df, Opt_minix_df, Opt_grpid, Opt_nogrpid, - Opt_resgid, Opt_resuid, Opt_sb, Opt_err_cont, Opt_err_panic, Opt_err_ro, - Opt_nouid32, Opt_nocheck, Opt_debug, Opt_oldalloc, Opt_orlov, - Opt_user_xattr, Opt_nouser_xattr, Opt_acl, Opt_noacl, - Opt_reservation, Opt_noreservation, Opt_noload, Opt_nobh, Opt_bh, - Opt_commit, Opt_journal_update, Opt_journal_inum, Opt_journal_dev, - Opt_journal_path, - Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback, - Opt_data_err_abort, Opt_data_err_ignore, - Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota, - Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_jqfmt_vfsv1, Opt_quota, - Opt_noquota, Opt_ignore, Opt_barrier, Opt_nobarrier, Opt_err, - Opt_resize, Opt_usrquota, Opt_grpquota -}; - -static const match_table_t tokens = { - {Opt_bsd_df, "bsddf"}, - {Opt_minix_df, "minixdf"}, - {Opt_grpid, "grpid"}, - {Opt_grpid, "bsdgroups"}, - {Opt_nogrpid, "nogrpid"}, - {Opt_nogrpid, "sysvgroups"}, - {Opt_resgid, "resgid=%u"}, - {Opt_resuid, "resuid=%u"}, - {Opt_sb, "sb=%u"}, - {Opt_err_cont, "errors=continue"}, - {Opt_err_panic, "errors=panic"}, - {Opt_err_ro, "errors=remount-ro"}, - {Opt_nouid32, "nouid32"}, - {Opt_nocheck, "nocheck"}, - {Opt_nocheck, "check=none"}, - {Opt_debug, "debug"}, - {Opt_oldalloc, "oldalloc"}, - {Opt_orlov, "orlov"}, - {Opt_user_xattr, "user_xattr"}, - {Opt_nouser_xattr, "nouser_xattr"}, - {Opt_acl, "acl"}, - {Opt_noacl, "noacl"}, - {Opt_reservation, "reservation"}, - {Opt_noreservation, "noreservation"}, - {Opt_noload, "noload"}, - {Opt_noload, "norecovery"}, - {Opt_nobh, "nobh"}, - {Opt_bh, "bh"}, - {Opt_commit, "commit=%u"}, - {Opt_journal_update, "journal=update"}, - {Opt_journal_inum, "journal=%u"}, - {Opt_journal_dev, "journal_dev=%u"}, - {Opt_journal_path, "journal_path=%s"}, - {Opt_abort, "abort"}, - {Opt_data_journal, "data=journal"}, - {Opt_data_ordered, "data=ordered"}, - {Opt_data_writeback, "data=writeback"}, - {Opt_data_err_abort, "data_err=abort"}, - {Opt_data_err_ignore, "data_err=ignore"}, - {Opt_offusrjquota, "usrjquota="}, - {Opt_usrjquota, "usrjquota=%s"}, - {Opt_offgrpjquota, "grpjquota="}, - {Opt_grpjquota, "grpjquota=%s"}, - {Opt_jqfmt_vfsold, "jqfmt=vfsold"}, - {Opt_jqfmt_vfsv0, "jqfmt=vfsv0"}, - {Opt_jqfmt_vfsv1, "jqfmt=vfsv1"}, - {Opt_grpquota, "grpquota"}, - {Opt_noquota, "noquota"}, - {Opt_quota, "quota"}, - {Opt_usrquota, "usrquota"}, - {Opt_barrier, "barrier=%u"}, - {Opt_barrier, "barrier"}, - {Opt_nobarrier, "nobarrier"}, - {Opt_resize, "resize"}, - {Opt_err, NULL}, -}; - -static ext3_fsblk_t get_sb_block(void **data, struct super_block *sb) -{ - ext3_fsblk_t sb_block; - char *options = (char *) *data; - - if (!options || strncmp(options, "sb=", 3) != 0) - return 1; /* Default location */ - options += 3; - /*todo: use simple_strtoll with >32bit ext3 */ - sb_block = simple_strtoul(options, &options, 0); - if (*options && *options != ',') { - ext3_msg(sb, KERN_ERR, "error: invalid sb specification: %s", - (char *) *data); - return 1; - } - if (*options == ',') - options++; - *data = (void *) options; - return sb_block; -} - -#ifdef CONFIG_QUOTA -static int set_qf_name(struct super_block *sb, int qtype, substring_t *args) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - char *qname; - - if (sb_any_quota_loaded(sb) && - !sbi->s_qf_names[qtype]) { - ext3_msg(sb, KERN_ERR, - "Cannot change journaled " - "quota options when quota turned on"); - return 0; - } - qname = match_strdup(args); - if (!qname) { - ext3_msg(sb, KERN_ERR, - "Not enough memory for storing quotafile name"); - return 0; - } - if (sbi->s_qf_names[qtype]) { - int same = !strcmp(sbi->s_qf_names[qtype], qname); - - kfree(qname); - if (!same) { - ext3_msg(sb, KERN_ERR, - "%s quota file already specified", - QTYPE2NAME(qtype)); - } - return same; - } - if (strchr(qname, '/')) { - ext3_msg(sb, KERN_ERR, - "quotafile must be on filesystem root"); - kfree(qname); - return 0; - } - sbi->s_qf_names[qtype] = qname; - set_opt(sbi->s_mount_opt, QUOTA); - return 1; -} - -static int clear_qf_name(struct super_block *sb, int qtype) { - - struct ext3_sb_info *sbi = EXT3_SB(sb); - - if (sb_any_quota_loaded(sb) && - sbi->s_qf_names[qtype]) { - ext3_msg(sb, KERN_ERR, "Cannot change journaled quota options" - " when quota turned on"); - return 0; - } - if (sbi->s_qf_names[qtype]) { - kfree(sbi->s_qf_names[qtype]); - sbi->s_qf_names[qtype] = NULL; - } - return 1; -} -#endif - -static int parse_options (char *options, struct super_block *sb, - unsigned int *inum, unsigned long *journal_devnum, - ext3_fsblk_t *n_blocks_count, int is_remount) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - char * p; - substring_t args[MAX_OPT_ARGS]; - int data_opt = 0; - int option; - kuid_t uid; - kgid_t gid; - char *journal_path; - struct inode *journal_inode; - struct path path; - int error; - -#ifdef CONFIG_QUOTA - int qfmt; -#endif - - if (!options) - return 1; - - while ((p = strsep (&options, ",")) != NULL) { - int token; - if (!*p) - continue; - /* - * Initialize args struct so we know whether arg was - * found; some options take optional arguments. - */ - args[0].to = args[0].from = NULL; - token = match_token(p, tokens, args); - switch (token) { - case Opt_bsd_df: - clear_opt (sbi->s_mount_opt, MINIX_DF); - break; - case Opt_minix_df: - set_opt (sbi->s_mount_opt, MINIX_DF); - break; - case Opt_grpid: - set_opt (sbi->s_mount_opt, GRPID); - break; - case Opt_nogrpid: - clear_opt (sbi->s_mount_opt, GRPID); - break; - case Opt_resuid: - if (match_int(&args[0], &option)) - return 0; - uid = make_kuid(current_user_ns(), option); - if (!uid_valid(uid)) { - ext3_msg(sb, KERN_ERR, "Invalid uid value %d", option); - return 0; - - } - sbi->s_resuid = uid; - break; - case Opt_resgid: - if (match_int(&args[0], &option)) - return 0; - gid = make_kgid(current_user_ns(), option); - if (!gid_valid(gid)) { - ext3_msg(sb, KERN_ERR, "Invalid gid value %d", option); - return 0; - } - sbi->s_resgid = gid; - break; - case Opt_sb: - /* handled by get_sb_block() instead of here */ - /* *sb_block = match_int(&args[0]); */ - break; - case Opt_err_panic: - clear_opt (sbi->s_mount_opt, ERRORS_CONT); - clear_opt (sbi->s_mount_opt, ERRORS_RO); - set_opt (sbi->s_mount_opt, ERRORS_PANIC); - break; - case Opt_err_ro: - clear_opt (sbi->s_mount_opt, ERRORS_CONT); - clear_opt (sbi->s_mount_opt, ERRORS_PANIC); - set_opt (sbi->s_mount_opt, ERRORS_RO); - break; - case Opt_err_cont: - clear_opt (sbi->s_mount_opt, ERRORS_RO); - clear_opt (sbi->s_mount_opt, ERRORS_PANIC); - set_opt (sbi->s_mount_opt, ERRORS_CONT); - break; - case Opt_nouid32: - set_opt (sbi->s_mount_opt, NO_UID32); - break; - case Opt_nocheck: - clear_opt (sbi->s_mount_opt, CHECK); - break; - case Opt_debug: - set_opt (sbi->s_mount_opt, DEBUG); - break; - case Opt_oldalloc: - ext3_msg(sb, KERN_WARNING, - "Ignoring deprecated oldalloc option"); - break; - case Opt_orlov: - ext3_msg(sb, KERN_WARNING, - "Ignoring deprecated orlov option"); - break; -#ifdef CONFIG_EXT3_FS_XATTR - case Opt_user_xattr: - set_opt (sbi->s_mount_opt, XATTR_USER); - break; - case Opt_nouser_xattr: - clear_opt (sbi->s_mount_opt, XATTR_USER); - break; -#else - case Opt_user_xattr: - case Opt_nouser_xattr: - ext3_msg(sb, KERN_INFO, - "(no)user_xattr options not supported"); - break; -#endif -#ifdef CONFIG_EXT3_FS_POSIX_ACL - case Opt_acl: - set_opt(sbi->s_mount_opt, POSIX_ACL); - break; - case Opt_noacl: - clear_opt(sbi->s_mount_opt, POSIX_ACL); - break; -#else - case Opt_acl: - case Opt_noacl: - ext3_msg(sb, KERN_INFO, - "(no)acl options not supported"); - break; -#endif - case Opt_reservation: - set_opt(sbi->s_mount_opt, RESERVATION); - break; - case Opt_noreservation: - clear_opt(sbi->s_mount_opt, RESERVATION); - break; - case Opt_journal_update: - /* @@@ FIXME */ - /* Eventually we will want to be able to create - a journal file here. For now, only allow the - user to specify an existing inode to be the - journal file. */ - if (is_remount) { - ext3_msg(sb, KERN_ERR, "error: cannot specify " - "journal on remount"); - return 0; - } - set_opt (sbi->s_mount_opt, UPDATE_JOURNAL); - break; - case Opt_journal_inum: - if (is_remount) { - ext3_msg(sb, KERN_ERR, "error: cannot specify " - "journal on remount"); - return 0; - } - if (match_int(&args[0], &option)) - return 0; - *inum = option; - break; - case Opt_journal_dev: - if (is_remount) { - ext3_msg(sb, KERN_ERR, "error: cannot specify " - "journal on remount"); - return 0; - } - if (match_int(&args[0], &option)) - return 0; - *journal_devnum = option; - break; - case Opt_journal_path: - if (is_remount) { - ext3_msg(sb, KERN_ERR, "error: cannot specify " - "journal on remount"); - return 0; - } - - journal_path = match_strdup(&args[0]); - if (!journal_path) { - ext3_msg(sb, KERN_ERR, "error: could not dup " - "journal device string"); - return 0; - } - - error = kern_path(journal_path, LOOKUP_FOLLOW, &path); - if (error) { - ext3_msg(sb, KERN_ERR, "error: could not find " - "journal device path: error %d", error); - kfree(journal_path); - return 0; - } - - journal_inode = d_inode(path.dentry); - if (!S_ISBLK(journal_inode->i_mode)) { - ext3_msg(sb, KERN_ERR, "error: journal path %s " - "is not a block device", journal_path); - path_put(&path); - kfree(journal_path); - return 0; - } - - *journal_devnum = new_encode_dev(journal_inode->i_rdev); - path_put(&path); - kfree(journal_path); - break; - case Opt_noload: - set_opt (sbi->s_mount_opt, NOLOAD); - break; - case Opt_commit: - if (match_int(&args[0], &option)) - return 0; - if (option < 0) - return 0; - if (option == 0) - option = JBD_DEFAULT_MAX_COMMIT_AGE; - sbi->s_commit_interval = HZ * option; - break; - case Opt_data_journal: - data_opt = EXT3_MOUNT_JOURNAL_DATA; - goto datacheck; - case Opt_data_ordered: - data_opt = EXT3_MOUNT_ORDERED_DATA; - goto datacheck; - case Opt_data_writeback: - data_opt = EXT3_MOUNT_WRITEBACK_DATA; - datacheck: - if (is_remount) { - if (test_opt(sb, DATA_FLAGS) == data_opt) - break; - ext3_msg(sb, KERN_ERR, - "error: cannot change " - "data mode on remount. The filesystem " - "is mounted in data=%s mode and you " - "try to remount it in data=%s mode.", - data_mode_string(test_opt(sb, - DATA_FLAGS)), - data_mode_string(data_opt)); - return 0; - } else { - clear_opt(sbi->s_mount_opt, DATA_FLAGS); - sbi->s_mount_opt |= data_opt; - } - break; - case Opt_data_err_abort: - set_opt(sbi->s_mount_opt, DATA_ERR_ABORT); - break; - case Opt_data_err_ignore: - clear_opt(sbi->s_mount_opt, DATA_ERR_ABORT); - break; -#ifdef CONFIG_QUOTA - case Opt_usrjquota: - if (!set_qf_name(sb, USRQUOTA, &args[0])) - return 0; - break; - case Opt_grpjquota: - if (!set_qf_name(sb, GRPQUOTA, &args[0])) - return 0; - break; - case Opt_offusrjquota: - if (!clear_qf_name(sb, USRQUOTA)) - return 0; - break; - case Opt_offgrpjquota: - if (!clear_qf_name(sb, GRPQUOTA)) - return 0; - break; - case Opt_jqfmt_vfsold: - qfmt = QFMT_VFS_OLD; - goto set_qf_format; - case Opt_jqfmt_vfsv0: - qfmt = QFMT_VFS_V0; - goto set_qf_format; - case Opt_jqfmt_vfsv1: - qfmt = QFMT_VFS_V1; -set_qf_format: - if (sb_any_quota_loaded(sb) && - sbi->s_jquota_fmt != qfmt) { - ext3_msg(sb, KERN_ERR, "error: cannot change " - "journaled quota options when " - "quota turned on."); - return 0; - } - sbi->s_jquota_fmt = qfmt; - break; - case Opt_quota: - case Opt_usrquota: - set_opt(sbi->s_mount_opt, QUOTA); - set_opt(sbi->s_mount_opt, USRQUOTA); - break; - case Opt_grpquota: - set_opt(sbi->s_mount_opt, QUOTA); - set_opt(sbi->s_mount_opt, GRPQUOTA); - break; - case Opt_noquota: - if (sb_any_quota_loaded(sb)) { - ext3_msg(sb, KERN_ERR, "error: cannot change " - "quota options when quota turned on."); - return 0; - } - clear_opt(sbi->s_mount_opt, QUOTA); - clear_opt(sbi->s_mount_opt, USRQUOTA); - clear_opt(sbi->s_mount_opt, GRPQUOTA); - break; -#else - case Opt_quota: - case Opt_usrquota: - case Opt_grpquota: - ext3_msg(sb, KERN_ERR, - "error: quota options not supported."); - break; - case Opt_usrjquota: - case Opt_grpjquota: - case Opt_offusrjquota: - case Opt_offgrpjquota: - case Opt_jqfmt_vfsold: - case Opt_jqfmt_vfsv0: - case Opt_jqfmt_vfsv1: - ext3_msg(sb, KERN_ERR, - "error: journaled quota options not " - "supported."); - break; - case Opt_noquota: - break; -#endif - case Opt_abort: - set_opt(sbi->s_mount_opt, ABORT); - break; - case Opt_nobarrier: - clear_opt(sbi->s_mount_opt, BARRIER); - break; - case Opt_barrier: - if (args[0].from) { - if (match_int(&args[0], &option)) - return 0; - } else - option = 1; /* No argument, default to 1 */ - if (option) - set_opt(sbi->s_mount_opt, BARRIER); - else - clear_opt(sbi->s_mount_opt, BARRIER); - break; - case Opt_ignore: - break; - case Opt_resize: - if (!is_remount) { - ext3_msg(sb, KERN_ERR, - "error: resize option only available " - "for remount"); - return 0; - } - if (match_int(&args[0], &option) != 0) - return 0; - *n_blocks_count = option; - break; - case Opt_nobh: - ext3_msg(sb, KERN_WARNING, - "warning: ignoring deprecated nobh option"); - break; - case Opt_bh: - ext3_msg(sb, KERN_WARNING, - "warning: ignoring deprecated bh option"); - break; - default: - ext3_msg(sb, KERN_ERR, - "error: unrecognized mount option \"%s\" " - "or missing value", p); - return 0; - } - } -#ifdef CONFIG_QUOTA - if (sbi->s_qf_names[USRQUOTA] || sbi->s_qf_names[GRPQUOTA]) { - if (test_opt(sb, USRQUOTA) && sbi->s_qf_names[USRQUOTA]) - clear_opt(sbi->s_mount_opt, USRQUOTA); - if (test_opt(sb, GRPQUOTA) && sbi->s_qf_names[GRPQUOTA]) - clear_opt(sbi->s_mount_opt, GRPQUOTA); - - if (test_opt(sb, GRPQUOTA) || test_opt(sb, USRQUOTA)) { - ext3_msg(sb, KERN_ERR, "error: old and new quota " - "format mixing."); - return 0; - } - - if (!sbi->s_jquota_fmt) { - ext3_msg(sb, KERN_ERR, "error: journaled quota format " - "not specified."); - return 0; - } - } -#endif - return 1; -} - -static int ext3_setup_super(struct super_block *sb, struct ext3_super_block *es, - int read_only) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - int res = 0; - - if (le32_to_cpu(es->s_rev_level) > EXT3_MAX_SUPP_REV) { - ext3_msg(sb, KERN_ERR, - "error: revision level too high, " - "forcing read-only mode"); - res = MS_RDONLY; - } - if (read_only) - return res; - if (!(sbi->s_mount_state & EXT3_VALID_FS)) - ext3_msg(sb, KERN_WARNING, - "warning: mounting unchecked fs, " - "running e2fsck is recommended"); - else if ((sbi->s_mount_state & EXT3_ERROR_FS)) - ext3_msg(sb, KERN_WARNING, - "warning: mounting fs with errors, " - "running e2fsck is recommended"); - else if ((__s16) le16_to_cpu(es->s_max_mnt_count) > 0 && - le16_to_cpu(es->s_mnt_count) >= - le16_to_cpu(es->s_max_mnt_count)) - ext3_msg(sb, KERN_WARNING, - "warning: maximal mount count reached, " - "running e2fsck is recommended"); - else if (le32_to_cpu(es->s_checkinterval) && - (le32_to_cpu(es->s_lastcheck) + - le32_to_cpu(es->s_checkinterval) <= get_seconds())) - ext3_msg(sb, KERN_WARNING, - "warning: checktime reached, " - "running e2fsck is recommended"); -#if 0 - /* @@@ We _will_ want to clear the valid bit if we find - inconsistencies, to force a fsck at reboot. But for - a plain journaled filesystem we can keep it set as - valid forever! :) */ - es->s_state &= cpu_to_le16(~EXT3_VALID_FS); -#endif - if (!le16_to_cpu(es->s_max_mnt_count)) - es->s_max_mnt_count = cpu_to_le16(EXT3_DFL_MAX_MNT_COUNT); - le16_add_cpu(&es->s_mnt_count, 1); - es->s_mtime = cpu_to_le32(get_seconds()); - ext3_update_dynamic_rev(sb); - EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); - - ext3_commit_super(sb, es, 1); - if (test_opt(sb, DEBUG)) - ext3_msg(sb, KERN_INFO, "[bs=%lu, gc=%lu, " - "bpg=%lu, ipg=%lu, mo=%04lx]", - sb->s_blocksize, - sbi->s_groups_count, - EXT3_BLOCKS_PER_GROUP(sb), - EXT3_INODES_PER_GROUP(sb), - sbi->s_mount_opt); - - if (EXT3_SB(sb)->s_journal->j_inode == NULL) { - char b[BDEVNAME_SIZE]; - ext3_msg(sb, KERN_INFO, "using external journal on %s", - bdevname(EXT3_SB(sb)->s_journal->j_dev, b)); - } else { - ext3_msg(sb, KERN_INFO, "using internal journal"); - } - cleancache_init_fs(sb); - return res; -} - -/* Called at mount-time, super-block is locked */ -static int ext3_check_descriptors(struct super_block *sb) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - int i; - - ext3_debug ("Checking group descriptors"); - - for (i = 0; i < sbi->s_groups_count; i++) { - struct ext3_group_desc *gdp = ext3_get_group_desc(sb, i, NULL); - ext3_fsblk_t first_block = ext3_group_first_block_no(sb, i); - ext3_fsblk_t last_block; - - if (i == sbi->s_groups_count - 1) - last_block = le32_to_cpu(sbi->s_es->s_blocks_count) - 1; - else - last_block = first_block + - (EXT3_BLOCKS_PER_GROUP(sb) - 1); - - if (le32_to_cpu(gdp->bg_block_bitmap) < first_block || - le32_to_cpu(gdp->bg_block_bitmap) > last_block) - { - ext3_error (sb, "ext3_check_descriptors", - "Block bitmap for group %d" - " not in group (block %lu)!", - i, (unsigned long) - le32_to_cpu(gdp->bg_block_bitmap)); - return 0; - } - if (le32_to_cpu(gdp->bg_inode_bitmap) < first_block || - le32_to_cpu(gdp->bg_inode_bitmap) > last_block) - { - ext3_error (sb, "ext3_check_descriptors", - "Inode bitmap for group %d" - " not in group (block %lu)!", - i, (unsigned long) - le32_to_cpu(gdp->bg_inode_bitmap)); - return 0; - } - if (le32_to_cpu(gdp->bg_inode_table) < first_block || - le32_to_cpu(gdp->bg_inode_table) + sbi->s_itb_per_group - 1 > - last_block) - { - ext3_error (sb, "ext3_check_descriptors", - "Inode table for group %d" - " not in group (block %lu)!", - i, (unsigned long) - le32_to_cpu(gdp->bg_inode_table)); - return 0; - } - } - - sbi->s_es->s_free_blocks_count=cpu_to_le32(ext3_count_free_blocks(sb)); - sbi->s_es->s_free_inodes_count=cpu_to_le32(ext3_count_free_inodes(sb)); - return 1; -} - - -/* ext3_orphan_cleanup() walks a singly-linked list of inodes (starting at - * the superblock) which were deleted from all directories, but held open by - * a process at the time of a crash. We walk the list and try to delete these - * inodes at recovery time (only with a read-write filesystem). - * - * In order to keep the orphan inode chain consistent during traversal (in - * case of crash during recovery), we link each inode into the superblock - * orphan list_head and handle it the same way as an inode deletion during - * normal operation (which journals the operations for us). - * - * We only do an iget() and an iput() on each inode, which is very safe if we - * accidentally point at an in-use or already deleted inode. The worst that - * can happen in this case is that we get a "bit already cleared" message from - * ext3_free_inode(). The only reason we would point at a wrong inode is if - * e2fsck was run on this filesystem, and it must have already done the orphan - * inode cleanup for us, so we can safely abort without any further action. - */ -static void ext3_orphan_cleanup (struct super_block * sb, - struct ext3_super_block * es) -{ - unsigned int s_flags = sb->s_flags; - int nr_orphans = 0, nr_truncates = 0; -#ifdef CONFIG_QUOTA - int i; -#endif - if (!es->s_last_orphan) { - jbd_debug(4, "no orphan inodes to clean up\n"); - return; - } - - if (bdev_read_only(sb->s_bdev)) { - ext3_msg(sb, KERN_ERR, "error: write access " - "unavailable, skipping orphan cleanup."); - return; - } - - /* Check if feature set allows readwrite operations */ - if (EXT3_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP)) { - ext3_msg(sb, KERN_INFO, "Skipping orphan cleanup due to " - "unknown ROCOMPAT features"); - return; - } - - if (EXT3_SB(sb)->s_mount_state & EXT3_ERROR_FS) { - /* don't clear list on RO mount w/ errors */ - if (es->s_last_orphan && !(s_flags & MS_RDONLY)) { - jbd_debug(1, "Errors on filesystem, " - "clearing orphan list.\n"); - es->s_last_orphan = 0; - } - jbd_debug(1, "Skipping orphan recovery on fs with errors.\n"); - return; - } - - if (s_flags & MS_RDONLY) { - ext3_msg(sb, KERN_INFO, "orphan cleanup on readonly fs"); - sb->s_flags &= ~MS_RDONLY; - } -#ifdef CONFIG_QUOTA - /* Needed for iput() to work correctly and not trash data */ - sb->s_flags |= MS_ACTIVE; - /* Turn on quotas so that they are updated correctly */ - for (i = 0; i < EXT3_MAXQUOTAS; i++) { - if (EXT3_SB(sb)->s_qf_names[i]) { - int ret = ext3_quota_on_mount(sb, i); - if (ret < 0) - ext3_msg(sb, KERN_ERR, - "error: cannot turn on journaled " - "quota: %d", ret); - } - } -#endif - - while (es->s_last_orphan) { - struct inode *inode; - - inode = ext3_orphan_get(sb, le32_to_cpu(es->s_last_orphan)); - if (IS_ERR(inode)) { - es->s_last_orphan = 0; - break; - } - - list_add(&EXT3_I(inode)->i_orphan, &EXT3_SB(sb)->s_orphan); - dquot_initialize(inode); - if (inode->i_nlink) { - printk(KERN_DEBUG - "%s: truncating inode %lu to %Ld bytes\n", - __func__, inode->i_ino, inode->i_size); - jbd_debug(2, "truncating inode %lu to %Ld bytes\n", - inode->i_ino, inode->i_size); - ext3_truncate(inode); - nr_truncates++; - } else { - printk(KERN_DEBUG - "%s: deleting unreferenced inode %lu\n", - __func__, inode->i_ino); - jbd_debug(2, "deleting unreferenced inode %lu\n", - inode->i_ino); - nr_orphans++; - } - iput(inode); /* The delete magic happens here! */ - } - -#define PLURAL(x) (x), ((x)==1) ? "" : "s" - - if (nr_orphans) - ext3_msg(sb, KERN_INFO, "%d orphan inode%s deleted", - PLURAL(nr_orphans)); - if (nr_truncates) - ext3_msg(sb, KERN_INFO, "%d truncate%s cleaned up", - PLURAL(nr_truncates)); -#ifdef CONFIG_QUOTA - /* Turn quotas off */ - for (i = 0; i < EXT3_MAXQUOTAS; i++) { - if (sb_dqopt(sb)->files[i]) - dquot_quota_off(sb, i); - } -#endif - sb->s_flags = s_flags; /* Restore MS_RDONLY status */ -} - -/* - * Maximal file size. There is a direct, and {,double-,triple-}indirect - * block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks. - * We need to be 1 filesystem block less than the 2^32 sector limit. - */ -static loff_t ext3_max_size(int bits) -{ - loff_t res = EXT3_NDIR_BLOCKS; - int meta_blocks; - loff_t upper_limit; - - /* This is calculated to be the largest file size for a - * dense, file such that the total number of - * sectors in the file, including data and all indirect blocks, - * does not exceed 2^32 -1 - * __u32 i_blocks representing the total number of - * 512 bytes blocks of the file - */ - upper_limit = (1LL << 32) - 1; - - /* total blocks in file system block size */ - upper_limit >>= (bits - 9); - - - /* indirect blocks */ - meta_blocks = 1; - /* double indirect blocks */ - meta_blocks += 1 + (1LL << (bits-2)); - /* tripple indirect blocks */ - meta_blocks += 1 + (1LL << (bits-2)) + (1LL << (2*(bits-2))); - - upper_limit -= meta_blocks; - upper_limit <<= bits; - - res += 1LL << (bits-2); - res += 1LL << (2*(bits-2)); - res += 1LL << (3*(bits-2)); - res <<= bits; - if (res > upper_limit) - res = upper_limit; - - if (res > MAX_LFS_FILESIZE) - res = MAX_LFS_FILESIZE; - - return res; -} - -static ext3_fsblk_t descriptor_loc(struct super_block *sb, - ext3_fsblk_t logic_sb_block, - int nr) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - unsigned long bg, first_meta_bg; - int has_super = 0; - - first_meta_bg = le32_to_cpu(sbi->s_es->s_first_meta_bg); - - if (!EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_META_BG) || - nr < first_meta_bg) - return (logic_sb_block + nr + 1); - bg = sbi->s_desc_per_block * nr; - if (ext3_bg_has_super(sb, bg)) - has_super = 1; - return (has_super + ext3_group_first_block_no(sb, bg)); -} - - -static int ext3_fill_super (struct super_block *sb, void *data, int silent) -{ - struct buffer_head * bh; - struct ext3_super_block *es = NULL; - struct ext3_sb_info *sbi; - ext3_fsblk_t block; - ext3_fsblk_t sb_block = get_sb_block(&data, sb); - ext3_fsblk_t logic_sb_block; - unsigned long offset = 0; - unsigned int journal_inum = 0; - unsigned long journal_devnum = 0; - unsigned long def_mount_opts; - struct inode *root; - int blocksize; - int hblock; - int db_count; - int i; - int needs_recovery; - int ret = -EINVAL; - __le32 features; - int err; - - sbi = kzalloc(sizeof(*sbi), GFP_KERNEL); - if (!sbi) - return -ENOMEM; - - sbi->s_blockgroup_lock = - kzalloc(sizeof(struct blockgroup_lock), GFP_KERNEL); - if (!sbi->s_blockgroup_lock) { - kfree(sbi); - return -ENOMEM; - } - sb->s_fs_info = sbi; - sbi->s_sb_block = sb_block; - - blocksize = sb_min_blocksize(sb, EXT3_MIN_BLOCK_SIZE); - if (!blocksize) { - ext3_msg(sb, KERN_ERR, "error: unable to set blocksize"); - goto out_fail; - } - - /* - * The ext3 superblock will not be buffer aligned for other than 1kB - * block sizes. We need to calculate the offset from buffer start. - */ - if (blocksize != EXT3_MIN_BLOCK_SIZE) { - logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize; - offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize; - } else { - logic_sb_block = sb_block; - } - - if (!(bh = sb_bread(sb, logic_sb_block))) { - ext3_msg(sb, KERN_ERR, "error: unable to read superblock"); - goto out_fail; - } - /* - * Note: s_es must be initialized as soon as possible because - * some ext3 macro-instructions depend on its value - */ - es = (struct ext3_super_block *) (bh->b_data + offset); - sbi->s_es = es; - sb->s_magic = le16_to_cpu(es->s_magic); - if (sb->s_magic != EXT3_SUPER_MAGIC) - goto cantfind_ext3; - - /* Set defaults before we parse the mount options */ - def_mount_opts = le32_to_cpu(es->s_default_mount_opts); - if (def_mount_opts & EXT3_DEFM_DEBUG) - set_opt(sbi->s_mount_opt, DEBUG); - if (def_mount_opts & EXT3_DEFM_BSDGROUPS) - set_opt(sbi->s_mount_opt, GRPID); - if (def_mount_opts & EXT3_DEFM_UID16) - set_opt(sbi->s_mount_opt, NO_UID32); -#ifdef CONFIG_EXT3_FS_XATTR - if (def_mount_opts & EXT3_DEFM_XATTR_USER) - set_opt(sbi->s_mount_opt, XATTR_USER); -#endif -#ifdef CONFIG_EXT3_FS_POSIX_ACL - if (def_mount_opts & EXT3_DEFM_ACL) - set_opt(sbi->s_mount_opt, POSIX_ACL); -#endif - if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_DATA) - set_opt(sbi->s_mount_opt, JOURNAL_DATA); - else if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_ORDERED) - set_opt(sbi->s_mount_opt, ORDERED_DATA); - else if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_WBACK) - set_opt(sbi->s_mount_opt, WRITEBACK_DATA); - - if (le16_to_cpu(sbi->s_es->s_errors) == EXT3_ERRORS_PANIC) - set_opt(sbi->s_mount_opt, ERRORS_PANIC); - else if (le16_to_cpu(sbi->s_es->s_errors) == EXT3_ERRORS_CONTINUE) - set_opt(sbi->s_mount_opt, ERRORS_CONT); - else - set_opt(sbi->s_mount_opt, ERRORS_RO); - - sbi->s_resuid = make_kuid(&init_user_ns, le16_to_cpu(es->s_def_resuid)); - sbi->s_resgid = make_kgid(&init_user_ns, le16_to_cpu(es->s_def_resgid)); - - /* enable barriers by default */ - set_opt(sbi->s_mount_opt, BARRIER); - set_opt(sbi->s_mount_opt, RESERVATION); - - if (!parse_options ((char *) data, sb, &journal_inum, &journal_devnum, - NULL, 0)) - goto failed_mount; - - sb->s_flags = (sb->s_flags & ~MS_POSIXACL) | - (test_opt(sb, POSIX_ACL) ? MS_POSIXACL : 0); - - if (le32_to_cpu(es->s_rev_level) == EXT3_GOOD_OLD_REV && - (EXT3_HAS_COMPAT_FEATURE(sb, ~0U) || - EXT3_HAS_RO_COMPAT_FEATURE(sb, ~0U) || - EXT3_HAS_INCOMPAT_FEATURE(sb, ~0U))) - ext3_msg(sb, KERN_WARNING, - "warning: feature flags set on rev 0 fs, " - "running e2fsck is recommended"); - /* - * Check feature flags regardless of the revision level, since we - * previously didn't change the revision level when setting the flags, - * so there is a chance incompat flags are set on a rev 0 filesystem. - */ - features = EXT3_HAS_INCOMPAT_FEATURE(sb, ~EXT3_FEATURE_INCOMPAT_SUPP); - if (features) { - ext3_msg(sb, KERN_ERR, - "error: couldn't mount because of unsupported " - "optional features (%x)", le32_to_cpu(features)); - goto failed_mount; - } - features = EXT3_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP); - if (!(sb->s_flags & MS_RDONLY) && features) { - ext3_msg(sb, KERN_ERR, - "error: couldn't mount RDWR because of unsupported " - "optional features (%x)", le32_to_cpu(features)); - goto failed_mount; - } - blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size); - - if (blocksize < EXT3_MIN_BLOCK_SIZE || - blocksize > EXT3_MAX_BLOCK_SIZE) { - ext3_msg(sb, KERN_ERR, - "error: couldn't mount because of unsupported " - "filesystem blocksize %d", blocksize); - goto failed_mount; - } - - hblock = bdev_logical_block_size(sb->s_bdev); - if (sb->s_blocksize != blocksize) { - /* - * Make sure the blocksize for the filesystem is larger - * than the hardware sectorsize for the machine. - */ - if (blocksize < hblock) { - ext3_msg(sb, KERN_ERR, - "error: fsblocksize %d too small for " - "hardware sectorsize %d", blocksize, hblock); - goto failed_mount; - } - - brelse (bh); - if (!sb_set_blocksize(sb, blocksize)) { - ext3_msg(sb, KERN_ERR, - "error: bad blocksize %d", blocksize); - goto out_fail; - } - logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize; - offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize; - bh = sb_bread(sb, logic_sb_block); - if (!bh) { - ext3_msg(sb, KERN_ERR, - "error: can't read superblock on 2nd try"); - goto failed_mount; - } - es = (struct ext3_super_block *)(bh->b_data + offset); - sbi->s_es = es; - if (es->s_magic != cpu_to_le16(EXT3_SUPER_MAGIC)) { - ext3_msg(sb, KERN_ERR, - "error: magic mismatch"); - goto failed_mount; - } - } - - sb->s_maxbytes = ext3_max_size(sb->s_blocksize_bits); - - if (le32_to_cpu(es->s_rev_level) == EXT3_GOOD_OLD_REV) { - sbi->s_inode_size = EXT3_GOOD_OLD_INODE_SIZE; - sbi->s_first_ino = EXT3_GOOD_OLD_FIRST_INO; - } else { - sbi->s_inode_size = le16_to_cpu(es->s_inode_size); - sbi->s_first_ino = le32_to_cpu(es->s_first_ino); - if ((sbi->s_inode_size < EXT3_GOOD_OLD_INODE_SIZE) || - (!is_power_of_2(sbi->s_inode_size)) || - (sbi->s_inode_size > blocksize)) { - ext3_msg(sb, KERN_ERR, - "error: unsupported inode size: %d", - sbi->s_inode_size); - goto failed_mount; - } - } - sbi->s_frag_size = EXT3_MIN_FRAG_SIZE << - le32_to_cpu(es->s_log_frag_size); - if (blocksize != sbi->s_frag_size) { - ext3_msg(sb, KERN_ERR, - "error: fragsize %lu != blocksize %u (unsupported)", - sbi->s_frag_size, blocksize); - goto failed_mount; - } - sbi->s_frags_per_block = 1; - sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group); - sbi->s_frags_per_group = le32_to_cpu(es->s_frags_per_group); - sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group); - if (EXT3_INODE_SIZE(sb) == 0 || EXT3_INODES_PER_GROUP(sb) == 0) - goto cantfind_ext3; - sbi->s_inodes_per_block = blocksize / EXT3_INODE_SIZE(sb); - if (sbi->s_inodes_per_block == 0) - goto cantfind_ext3; - sbi->s_itb_per_group = sbi->s_inodes_per_group / - sbi->s_inodes_per_block; - sbi->s_desc_per_block = blocksize / sizeof(struct ext3_group_desc); - sbi->s_sbh = bh; - sbi->s_mount_state = le16_to_cpu(es->s_state); - sbi->s_addr_per_block_bits = ilog2(EXT3_ADDR_PER_BLOCK(sb)); - sbi->s_desc_per_block_bits = ilog2(EXT3_DESC_PER_BLOCK(sb)); - for (i = 0; i < 4; i++) - sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]); - sbi->s_def_hash_version = es->s_def_hash_version; - i = le32_to_cpu(es->s_flags); - if (i & EXT2_FLAGS_UNSIGNED_HASH) - sbi->s_hash_unsigned = 3; - else if ((i & EXT2_FLAGS_SIGNED_HASH) == 0) { -#ifdef __CHAR_UNSIGNED__ - es->s_flags |= cpu_to_le32(EXT2_FLAGS_UNSIGNED_HASH); - sbi->s_hash_unsigned = 3; -#else - es->s_flags |= cpu_to_le32(EXT2_FLAGS_SIGNED_HASH); -#endif - } - - if (sbi->s_blocks_per_group > blocksize * 8) { - ext3_msg(sb, KERN_ERR, - "#blocks per group too big: %lu", - sbi->s_blocks_per_group); - goto failed_mount; - } - if (sbi->s_frags_per_group > blocksize * 8) { - ext3_msg(sb, KERN_ERR, - "error: #fragments per group too big: %lu", - sbi->s_frags_per_group); - goto failed_mount; - } - if (sbi->s_inodes_per_group > blocksize * 8) { - ext3_msg(sb, KERN_ERR, - "error: #inodes per group too big: %lu", - sbi->s_inodes_per_group); - goto failed_mount; - } - - err = generic_check_addressable(sb->s_blocksize_bits, - le32_to_cpu(es->s_blocks_count)); - if (err) { - ext3_msg(sb, KERN_ERR, - "error: filesystem is too large to mount safely"); - if (sizeof(sector_t) < 8) - ext3_msg(sb, KERN_ERR, - "error: CONFIG_LBDAF not enabled"); - ret = err; - goto failed_mount; - } - - if (EXT3_BLOCKS_PER_GROUP(sb) == 0) - goto cantfind_ext3; - sbi->s_groups_count = ((le32_to_cpu(es->s_blocks_count) - - le32_to_cpu(es->s_first_data_block) - 1) - / EXT3_BLOCKS_PER_GROUP(sb)) + 1; - db_count = DIV_ROUND_UP(sbi->s_groups_count, EXT3_DESC_PER_BLOCK(sb)); - sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *), - GFP_KERNEL); - if (sbi->s_group_desc == NULL) { - ext3_msg(sb, KERN_ERR, - "error: not enough memory"); - ret = -ENOMEM; - goto failed_mount; - } - - bgl_lock_init(sbi->s_blockgroup_lock); - - for (i = 0; i < db_count; i++) { - block = descriptor_loc(sb, logic_sb_block, i); - sbi->s_group_desc[i] = sb_bread(sb, block); - if (!sbi->s_group_desc[i]) { - ext3_msg(sb, KERN_ERR, - "error: can't read group descriptor %d", i); - db_count = i; - goto failed_mount2; - } - } - if (!ext3_check_descriptors (sb)) { - ext3_msg(sb, KERN_ERR, - "error: group descriptors corrupted"); - goto failed_mount2; - } - sbi->s_gdb_count = db_count; - get_random_bytes(&sbi->s_next_generation, sizeof(u32)); - spin_lock_init(&sbi->s_next_gen_lock); - - /* per fileystem reservation list head & lock */ - spin_lock_init(&sbi->s_rsv_window_lock); - sbi->s_rsv_window_root = RB_ROOT; - /* Add a single, static dummy reservation to the start of the - * reservation window list --- it gives us a placeholder for - * append-at-start-of-list which makes the allocation logic - * _much_ simpler. */ - sbi->s_rsv_window_head.rsv_start = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; - sbi->s_rsv_window_head.rsv_end = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; - sbi->s_rsv_window_head.rsv_alloc_hit = 0; - sbi->s_rsv_window_head.rsv_goal_size = 0; - ext3_rsv_window_add(sb, &sbi->s_rsv_window_head); - - /* - * set up enough so that it can read an inode - */ - sb->s_op = &ext3_sops; - sb->s_export_op = &ext3_export_ops; - sb->s_xattr = ext3_xattr_handlers; -#ifdef CONFIG_QUOTA - sb->s_qcop = &ext3_qctl_operations; - sb->dq_op = &ext3_quota_operations; - sb->s_quota_types = QTYPE_MASK_USR | QTYPE_MASK_GRP; -#endif - memcpy(sb->s_uuid, es->s_uuid, sizeof(es->s_uuid)); - INIT_LIST_HEAD(&sbi->s_orphan); /* unlinked but open files */ - mutex_init(&sbi->s_orphan_lock); - mutex_init(&sbi->s_resize_lock); - - sb->s_root = NULL; - - needs_recovery = (es->s_last_orphan != 0 || - EXT3_HAS_INCOMPAT_FEATURE(sb, - EXT3_FEATURE_INCOMPAT_RECOVER)); - - /* - * The first inode we look at is the journal inode. Don't try - * root first: it may be modified in the journal! - */ - if (!test_opt(sb, NOLOAD) && - EXT3_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL)) { - if (ext3_load_journal(sb, es, journal_devnum)) - goto failed_mount2; - } else if (journal_inum) { - if (ext3_create_journal(sb, es, journal_inum)) - goto failed_mount2; - } else { - if (!silent) - ext3_msg(sb, KERN_ERR, - "error: no journal found. " - "mounting ext3 over ext2?"); - goto failed_mount2; - } - err = percpu_counter_init(&sbi->s_freeblocks_counter, - ext3_count_free_blocks(sb), GFP_KERNEL); - if (!err) { - err = percpu_counter_init(&sbi->s_freeinodes_counter, - ext3_count_free_inodes(sb), GFP_KERNEL); - } - if (!err) { - err = percpu_counter_init(&sbi->s_dirs_counter, - ext3_count_dirs(sb), GFP_KERNEL); - } - if (err) { - ext3_msg(sb, KERN_ERR, "error: insufficient memory"); - ret = err; - goto failed_mount3; - } - - /* We have now updated the journal if required, so we can - * validate the data journaling mode. */ - switch (test_opt(sb, DATA_FLAGS)) { - case 0: - /* No mode set, assume a default based on the journal - capabilities: ORDERED_DATA if the journal can - cope, else JOURNAL_DATA */ - if (journal_check_available_features - (sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE)) - set_opt(sbi->s_mount_opt, DEFAULT_DATA_MODE); - else - set_opt(sbi->s_mount_opt, JOURNAL_DATA); - break; - - case EXT3_MOUNT_ORDERED_DATA: - case EXT3_MOUNT_WRITEBACK_DATA: - if (!journal_check_available_features - (sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE)) { - ext3_msg(sb, KERN_ERR, - "error: journal does not support " - "requested data journaling mode"); - goto failed_mount3; - } - default: - break; - } - - /* - * The journal_load will have done any necessary log recovery, - * so we can safely mount the rest of the filesystem now. - */ - - root = ext3_iget(sb, EXT3_ROOT_INO); - if (IS_ERR(root)) { - ext3_msg(sb, KERN_ERR, "error: get root inode failed"); - ret = PTR_ERR(root); - goto failed_mount3; - } - if (!S_ISDIR(root->i_mode) || !root->i_blocks || !root->i_size) { - iput(root); - ext3_msg(sb, KERN_ERR, "error: corrupt root inode, run e2fsck"); - goto failed_mount3; - } - sb->s_root = d_make_root(root); - if (!sb->s_root) { - ext3_msg(sb, KERN_ERR, "error: get root dentry failed"); - ret = -ENOMEM; - goto failed_mount3; - } - - if (ext3_setup_super(sb, es, sb->s_flags & MS_RDONLY)) - sb->s_flags |= MS_RDONLY; - - EXT3_SB(sb)->s_mount_state |= EXT3_ORPHAN_FS; - ext3_orphan_cleanup(sb, es); - EXT3_SB(sb)->s_mount_state &= ~EXT3_ORPHAN_FS; - if (needs_recovery) { - ext3_mark_recovery_complete(sb, es); - ext3_msg(sb, KERN_INFO, "recovery complete"); - } - ext3_msg(sb, KERN_INFO, "mounted filesystem with %s data mode", - test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA ? "journal": - test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA ? "ordered": - "writeback"); - - return 0; - -cantfind_ext3: - if (!silent) - ext3_msg(sb, KERN_INFO, - "error: can't find ext3 filesystem on dev %s.", - sb->s_id); - goto failed_mount; - -failed_mount3: - percpu_counter_destroy(&sbi->s_freeblocks_counter); - percpu_counter_destroy(&sbi->s_freeinodes_counter); - percpu_counter_destroy(&sbi->s_dirs_counter); - journal_destroy(sbi->s_journal); -failed_mount2: - for (i = 0; i < db_count; i++) - brelse(sbi->s_group_desc[i]); - kfree(sbi->s_group_desc); -failed_mount: -#ifdef CONFIG_QUOTA - for (i = 0; i < EXT3_MAXQUOTAS; i++) - kfree(sbi->s_qf_names[i]); -#endif - ext3_blkdev_remove(sbi); - brelse(bh); -out_fail: - sb->s_fs_info = NULL; - kfree(sbi->s_blockgroup_lock); - kfree(sbi); - return ret; -} - -/* - * Setup any per-fs journal parameters now. We'll do this both on - * initial mount, once the journal has been initialised but before we've - * done any recovery; and again on any subsequent remount. - */ -static void ext3_init_journal_params(struct super_block *sb, journal_t *journal) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - - if (sbi->s_commit_interval) - journal->j_commit_interval = sbi->s_commit_interval; - /* We could also set up an ext3-specific default for the commit - * interval here, but for now we'll just fall back to the jbd - * default. */ - - spin_lock(&journal->j_state_lock); - if (test_opt(sb, BARRIER)) - journal->j_flags |= JFS_BARRIER; - else - journal->j_flags &= ~JFS_BARRIER; - if (test_opt(sb, DATA_ERR_ABORT)) - journal->j_flags |= JFS_ABORT_ON_SYNCDATA_ERR; - else - journal->j_flags &= ~JFS_ABORT_ON_SYNCDATA_ERR; - spin_unlock(&journal->j_state_lock); -} - -static journal_t *ext3_get_journal(struct super_block *sb, - unsigned int journal_inum) -{ - struct inode *journal_inode; - journal_t *journal; - - /* First, test for the existence of a valid inode on disk. Bad - * things happen if we iget() an unused inode, as the subsequent - * iput() will try to delete it. */ - - journal_inode = ext3_iget(sb, journal_inum); - if (IS_ERR(journal_inode)) { - ext3_msg(sb, KERN_ERR, "error: no journal found"); - return NULL; - } - if (!journal_inode->i_nlink) { - make_bad_inode(journal_inode); - iput(journal_inode); - ext3_msg(sb, KERN_ERR, "error: journal inode is deleted"); - return NULL; - } - - jbd_debug(2, "Journal inode found at %p: %Ld bytes\n", - journal_inode, journal_inode->i_size); - if (!S_ISREG(journal_inode->i_mode)) { - ext3_msg(sb, KERN_ERR, "error: invalid journal inode"); - iput(journal_inode); - return NULL; - } - - journal = journal_init_inode(journal_inode); - if (!journal) { - ext3_msg(sb, KERN_ERR, "error: could not load journal inode"); - iput(journal_inode); - return NULL; - } - journal->j_private = sb; - ext3_init_journal_params(sb, journal); - return journal; -} - -static journal_t *ext3_get_dev_journal(struct super_block *sb, - dev_t j_dev) -{ - struct buffer_head * bh; - journal_t *journal; - ext3_fsblk_t start; - ext3_fsblk_t len; - int hblock, blocksize; - ext3_fsblk_t sb_block; - unsigned long offset; - struct ext3_super_block * es; - struct block_device *bdev; - - bdev = ext3_blkdev_get(j_dev, sb); - if (bdev == NULL) - return NULL; - - blocksize = sb->s_blocksize; - hblock = bdev_logical_block_size(bdev); - if (blocksize < hblock) { - ext3_msg(sb, KERN_ERR, - "error: blocksize too small for journal device"); - goto out_bdev; - } - - sb_block = EXT3_MIN_BLOCK_SIZE / blocksize; - offset = EXT3_MIN_BLOCK_SIZE % blocksize; - set_blocksize(bdev, blocksize); - if (!(bh = __bread(bdev, sb_block, blocksize))) { - ext3_msg(sb, KERN_ERR, "error: couldn't read superblock of " - "external journal"); - goto out_bdev; - } - - es = (struct ext3_super_block *) (bh->b_data + offset); - if ((le16_to_cpu(es->s_magic) != EXT3_SUPER_MAGIC) || - !(le32_to_cpu(es->s_feature_incompat) & - EXT3_FEATURE_INCOMPAT_JOURNAL_DEV)) { - ext3_msg(sb, KERN_ERR, "error: external journal has " - "bad superblock"); - brelse(bh); - goto out_bdev; - } - - if (memcmp(EXT3_SB(sb)->s_es->s_journal_uuid, es->s_uuid, 16)) { - ext3_msg(sb, KERN_ERR, "error: journal UUID does not match"); - brelse(bh); - goto out_bdev; - } - - len = le32_to_cpu(es->s_blocks_count); - start = sb_block + 1; - brelse(bh); /* we're done with the superblock */ - - journal = journal_init_dev(bdev, sb->s_bdev, - start, len, blocksize); - if (!journal) { - ext3_msg(sb, KERN_ERR, - "error: failed to create device journal"); - goto out_bdev; - } - journal->j_private = sb; - if (!bh_uptodate_or_lock(journal->j_sb_buffer)) { - if (bh_submit_read(journal->j_sb_buffer)) { - ext3_msg(sb, KERN_ERR, "I/O error on journal device"); - goto out_journal; - } - } - if (be32_to_cpu(journal->j_superblock->s_nr_users) != 1) { - ext3_msg(sb, KERN_ERR, - "error: external journal has more than one " - "user (unsupported) - %d", - be32_to_cpu(journal->j_superblock->s_nr_users)); - goto out_journal; - } - EXT3_SB(sb)->journal_bdev = bdev; - ext3_init_journal_params(sb, journal); - return journal; -out_journal: - journal_destroy(journal); -out_bdev: - ext3_blkdev_put(bdev); - return NULL; -} - -static int ext3_load_journal(struct super_block *sb, - struct ext3_super_block *es, - unsigned long journal_devnum) -{ - journal_t *journal; - unsigned int journal_inum = le32_to_cpu(es->s_journal_inum); - dev_t journal_dev; - int err = 0; - int really_read_only; - - if (journal_devnum && - journal_devnum != le32_to_cpu(es->s_journal_dev)) { - ext3_msg(sb, KERN_INFO, "external journal device major/minor " - "numbers have changed"); - journal_dev = new_decode_dev(journal_devnum); - } else - journal_dev = new_decode_dev(le32_to_cpu(es->s_journal_dev)); - - really_read_only = bdev_read_only(sb->s_bdev); - - /* - * Are we loading a blank journal or performing recovery after a - * crash? For recovery, we need to check in advance whether we - * can get read-write access to the device. - */ - - if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER)) { - if (sb->s_flags & MS_RDONLY) { - ext3_msg(sb, KERN_INFO, - "recovery required on readonly filesystem"); - if (really_read_only) { - ext3_msg(sb, KERN_ERR, "error: write access " - "unavailable, cannot proceed"); - return -EROFS; - } - ext3_msg(sb, KERN_INFO, - "write access will be enabled during recovery"); - } - } - - if (journal_inum && journal_dev) { - ext3_msg(sb, KERN_ERR, "error: filesystem has both journal " - "and inode journals"); - return -EINVAL; - } - - if (journal_inum) { - if (!(journal = ext3_get_journal(sb, journal_inum))) - return -EINVAL; - } else { - if (!(journal = ext3_get_dev_journal(sb, journal_dev))) - return -EINVAL; - } - - if (!(journal->j_flags & JFS_BARRIER)) - printk(KERN_INFO "EXT3-fs: barriers not enabled\n"); - - if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) { - err = journal_update_format(journal); - if (err) { - ext3_msg(sb, KERN_ERR, "error updating journal"); - journal_destroy(journal); - return err; - } - } - - if (!EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER)) - err = journal_wipe(journal, !really_read_only); - if (!err) - err = journal_load(journal); - - if (err) { - ext3_msg(sb, KERN_ERR, "error loading journal"); - journal_destroy(journal); - return err; - } - - EXT3_SB(sb)->s_journal = journal; - ext3_clear_journal_err(sb, es); - - if (!really_read_only && journal_devnum && - journal_devnum != le32_to_cpu(es->s_journal_dev)) { - es->s_journal_dev = cpu_to_le32(journal_devnum); - - /* Make sure we flush the recovery flag to disk. */ - ext3_commit_super(sb, es, 1); - } - - return 0; -} - -static int ext3_create_journal(struct super_block *sb, - struct ext3_super_block *es, - unsigned int journal_inum) -{ - journal_t *journal; - int err; - - if (sb->s_flags & MS_RDONLY) { - ext3_msg(sb, KERN_ERR, - "error: readonly filesystem when trying to " - "create journal"); - return -EROFS; - } - - journal = ext3_get_journal(sb, journal_inum); - if (!journal) - return -EINVAL; - - ext3_msg(sb, KERN_INFO, "creating new journal on inode %u", - journal_inum); - - err = journal_create(journal); - if (err) { - ext3_msg(sb, KERN_ERR, "error creating journal"); - journal_destroy(journal); - return -EIO; - } - - EXT3_SB(sb)->s_journal = journal; - - ext3_update_dynamic_rev(sb); - EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); - EXT3_SET_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL); - - es->s_journal_inum = cpu_to_le32(journal_inum); - - /* Make sure we flush the recovery flag to disk. */ - ext3_commit_super(sb, es, 1); - - return 0; -} - -static int ext3_commit_super(struct super_block *sb, - struct ext3_super_block *es, - int sync) -{ - struct buffer_head *sbh = EXT3_SB(sb)->s_sbh; - int error = 0; - - if (!sbh) - return error; - - if (buffer_write_io_error(sbh)) { - /* - * Oh, dear. A previous attempt to write the - * superblock failed. This could happen because the - * USB device was yanked out. Or it could happen to - * be a transient write error and maybe the block will - * be remapped. Nothing we can do but to retry the - * write and hope for the best. - */ - ext3_msg(sb, KERN_ERR, "previous I/O error to " - "superblock detected"); - clear_buffer_write_io_error(sbh); - set_buffer_uptodate(sbh); - } - /* - * If the file system is mounted read-only, don't update the - * superblock write time. This avoids updating the superblock - * write time when we are mounting the root file system - * read/only but we need to replay the journal; at that point, - * for people who are east of GMT and who make their clock - * tick in localtime for Windows bug-for-bug compatibility, - * the clock is set in the future, and this will cause e2fsck - * to complain and force a full file system check. - */ - if (!(sb->s_flags & MS_RDONLY)) - es->s_wtime = cpu_to_le32(get_seconds()); - es->s_free_blocks_count = cpu_to_le32(ext3_count_free_blocks(sb)); - es->s_free_inodes_count = cpu_to_le32(ext3_count_free_inodes(sb)); - BUFFER_TRACE(sbh, "marking dirty"); - mark_buffer_dirty(sbh); - if (sync) { - error = sync_dirty_buffer(sbh); - if (buffer_write_io_error(sbh)) { - ext3_msg(sb, KERN_ERR, "I/O error while writing " - "superblock"); - clear_buffer_write_io_error(sbh); - set_buffer_uptodate(sbh); - } - } - return error; -} - - -/* - * Have we just finished recovery? If so, and if we are mounting (or - * remounting) the filesystem readonly, then we will end up with a - * consistent fs on disk. Record that fact. - */ -static void ext3_mark_recovery_complete(struct super_block * sb, - struct ext3_super_block * es) -{ - journal_t *journal = EXT3_SB(sb)->s_journal; - - journal_lock_updates(journal); - if (journal_flush(journal) < 0) - goto out; - - if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER) && - sb->s_flags & MS_RDONLY) { - EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); - ext3_commit_super(sb, es, 1); - } - -out: - journal_unlock_updates(journal); -} - -/* - * If we are mounting (or read-write remounting) a filesystem whose journal - * has recorded an error from a previous lifetime, move that error to the - * main filesystem now. - */ -static void ext3_clear_journal_err(struct super_block *sb, - struct ext3_super_block *es) -{ - journal_t *journal; - int j_errno; - const char *errstr; - - journal = EXT3_SB(sb)->s_journal; - - /* - * Now check for any error status which may have been recorded in the - * journal by a prior ext3_error() or ext3_abort() - */ - - j_errno = journal_errno(journal); - if (j_errno) { - char nbuf[16]; - - errstr = ext3_decode_error(sb, j_errno, nbuf); - ext3_warning(sb, __func__, "Filesystem error recorded " - "from previous mount: %s", errstr); - ext3_warning(sb, __func__, "Marking fs in need of " - "filesystem check."); - - EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS; - es->s_state |= cpu_to_le16(EXT3_ERROR_FS); - ext3_commit_super (sb, es, 1); - - journal_clear_err(journal); - } -} - -/* - * Force the running and committing transactions to commit, - * and wait on the commit. - */ -int ext3_force_commit(struct super_block *sb) -{ - journal_t *journal; - int ret; - - if (sb->s_flags & MS_RDONLY) - return 0; - - journal = EXT3_SB(sb)->s_journal; - ret = ext3_journal_force_commit(journal); - return ret; -} - -static int ext3_sync_fs(struct super_block *sb, int wait) -{ - tid_t target; - - trace_ext3_sync_fs(sb, wait); - /* - * Writeback quota in non-journalled quota case - journalled quota has - * no dirty dquots - */ - dquot_writeback_dquots(sb, -1); - if (journal_start_commit(EXT3_SB(sb)->s_journal, &target)) { - if (wait) - log_wait_commit(EXT3_SB(sb)->s_journal, target); - } - return 0; -} - -/* - * LVM calls this function before a (read-only) snapshot is created. This - * gives us a chance to flush the journal completely and mark the fs clean. - */ -static int ext3_freeze(struct super_block *sb) -{ - int error = 0; - journal_t *journal; - - if (!(sb->s_flags & MS_RDONLY)) { - journal = EXT3_SB(sb)->s_journal; - - /* Now we set up the journal barrier. */ - journal_lock_updates(journal); - - /* - * We don't want to clear needs_recovery flag when we failed - * to flush the journal. - */ - error = journal_flush(journal); - if (error < 0) - goto out; - - /* Journal blocked and flushed, clear needs_recovery flag. */ - EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); - error = ext3_commit_super(sb, EXT3_SB(sb)->s_es, 1); - if (error) - goto out; - } - return 0; - -out: - journal_unlock_updates(journal); - return error; -} - -/* - * Called by LVM after the snapshot is done. We need to reset the RECOVER - * flag here, even though the filesystem is not technically dirty yet. - */ -static int ext3_unfreeze(struct super_block *sb) -{ - if (!(sb->s_flags & MS_RDONLY)) { - /* Reser the needs_recovery flag before the fs is unlocked. */ - EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); - ext3_commit_super(sb, EXT3_SB(sb)->s_es, 1); - journal_unlock_updates(EXT3_SB(sb)->s_journal); - } - return 0; -} - -static int ext3_remount (struct super_block * sb, int * flags, char * data) -{ - struct ext3_super_block * es; - struct ext3_sb_info *sbi = EXT3_SB(sb); - ext3_fsblk_t n_blocks_count = 0; - unsigned long old_sb_flags; - struct ext3_mount_options old_opts; - int enable_quota = 0; - int err; -#ifdef CONFIG_QUOTA - int i; -#endif - - sync_filesystem(sb); - - /* Store the original options */ - old_sb_flags = sb->s_flags; - old_opts.s_mount_opt = sbi->s_mount_opt; - old_opts.s_resuid = sbi->s_resuid; - old_opts.s_resgid = sbi->s_resgid; - old_opts.s_commit_interval = sbi->s_commit_interval; -#ifdef CONFIG_QUOTA - old_opts.s_jquota_fmt = sbi->s_jquota_fmt; - for (i = 0; i < EXT3_MAXQUOTAS; i++) - if (sbi->s_qf_names[i]) { - old_opts.s_qf_names[i] = kstrdup(sbi->s_qf_names[i], - GFP_KERNEL); - if (!old_opts.s_qf_names[i]) { - int j; - - for (j = 0; j < i; j++) - kfree(old_opts.s_qf_names[j]); - return -ENOMEM; - } - } else - old_opts.s_qf_names[i] = NULL; -#endif - - /* - * Allow the "check" option to be passed as a remount option. - */ - if (!parse_options(data, sb, NULL, NULL, &n_blocks_count, 1)) { - err = -EINVAL; - goto restore_opts; - } - - if (test_opt(sb, ABORT)) - ext3_abort(sb, __func__, "Abort forced by user"); - - sb->s_flags = (sb->s_flags & ~MS_POSIXACL) | - (test_opt(sb, POSIX_ACL) ? MS_POSIXACL : 0); - - es = sbi->s_es; - - ext3_init_journal_params(sb, sbi->s_journal); - - if ((*flags & MS_RDONLY) != (sb->s_flags & MS_RDONLY) || - n_blocks_count > le32_to_cpu(es->s_blocks_count)) { - if (test_opt(sb, ABORT)) { - err = -EROFS; - goto restore_opts; - } - - if (*flags & MS_RDONLY) { - err = dquot_suspend(sb, -1); - if (err < 0) - goto restore_opts; - - /* - * First of all, the unconditional stuff we have to do - * to disable replay of the journal when we next remount - */ - sb->s_flags |= MS_RDONLY; - - /* - * OK, test if we are remounting a valid rw partition - * readonly, and if so set the rdonly flag and then - * mark the partition as valid again. - */ - if (!(es->s_state & cpu_to_le16(EXT3_VALID_FS)) && - (sbi->s_mount_state & EXT3_VALID_FS)) - es->s_state = cpu_to_le16(sbi->s_mount_state); - - ext3_mark_recovery_complete(sb, es); - } else { - __le32 ret; - if ((ret = EXT3_HAS_RO_COMPAT_FEATURE(sb, - ~EXT3_FEATURE_RO_COMPAT_SUPP))) { - ext3_msg(sb, KERN_WARNING, - "warning: couldn't remount RDWR " - "because of unsupported optional " - "features (%x)", le32_to_cpu(ret)); - err = -EROFS; - goto restore_opts; - } - - /* - * If we have an unprocessed orphan list hanging - * around from a previously readonly bdev mount, - * require a full umount & mount for now. - */ - if (es->s_last_orphan) { - ext3_msg(sb, KERN_WARNING, "warning: couldn't " - "remount RDWR because of unprocessed " - "orphan inode list. Please " - "umount & mount instead."); - err = -EINVAL; - goto restore_opts; - } - - /* - * Mounting a RDONLY partition read-write, so reread - * and store the current valid flag. (It may have - * been changed by e2fsck since we originally mounted - * the partition.) - */ - ext3_clear_journal_err(sb, es); - sbi->s_mount_state = le16_to_cpu(es->s_state); - if ((err = ext3_group_extend(sb, es, n_blocks_count))) - goto restore_opts; - if (!ext3_setup_super (sb, es, 0)) - sb->s_flags &= ~MS_RDONLY; - enable_quota = 1; - } - } -#ifdef CONFIG_QUOTA - /* Release old quota file names */ - for (i = 0; i < EXT3_MAXQUOTAS; i++) - kfree(old_opts.s_qf_names[i]); -#endif - if (enable_quota) - dquot_resume(sb, -1); - return 0; -restore_opts: - sb->s_flags = old_sb_flags; - sbi->s_mount_opt = old_opts.s_mount_opt; - sbi->s_resuid = old_opts.s_resuid; - sbi->s_resgid = old_opts.s_resgid; - sbi->s_commit_interval = old_opts.s_commit_interval; -#ifdef CONFIG_QUOTA - sbi->s_jquota_fmt = old_opts.s_jquota_fmt; - for (i = 0; i < EXT3_MAXQUOTAS; i++) { - kfree(sbi->s_qf_names[i]); - sbi->s_qf_names[i] = old_opts.s_qf_names[i]; - } -#endif - return err; -} - -static int ext3_statfs (struct dentry * dentry, struct kstatfs * buf) -{ - struct super_block *sb = dentry->d_sb; - struct ext3_sb_info *sbi = EXT3_SB(sb); - struct ext3_super_block *es = sbi->s_es; - u64 fsid; - - if (test_opt(sb, MINIX_DF)) { - sbi->s_overhead_last = 0; - } else if (sbi->s_blocks_last != le32_to_cpu(es->s_blocks_count)) { - unsigned long ngroups = sbi->s_groups_count, i; - ext3_fsblk_t overhead = 0; - smp_rmb(); - - /* - * Compute the overhead (FS structures). This is constant - * for a given filesystem unless the number of block groups - * changes so we cache the previous value until it does. - */ - - /* - * All of the blocks before first_data_block are - * overhead - */ - overhead = le32_to_cpu(es->s_first_data_block); - - /* - * Add the overhead attributed to the superblock and - * block group descriptors. If the sparse superblocks - * feature is turned on, then not all groups have this. - */ - for (i = 0; i < ngroups; i++) { - overhead += ext3_bg_has_super(sb, i) + - ext3_bg_num_gdb(sb, i); - cond_resched(); - } - - /* - * Every block group has an inode bitmap, a block - * bitmap, and an inode table. - */ - overhead += ngroups * (2 + sbi->s_itb_per_group); - - /* Add the internal journal blocks as well */ - if (sbi->s_journal && !sbi->journal_bdev) - overhead += sbi->s_journal->j_maxlen; - - sbi->s_overhead_last = overhead; - smp_wmb(); - sbi->s_blocks_last = le32_to_cpu(es->s_blocks_count); - } - - buf->f_type = EXT3_SUPER_MAGIC; - buf->f_bsize = sb->s_blocksize; - buf->f_blocks = le32_to_cpu(es->s_blocks_count) - sbi->s_overhead_last; - buf->f_bfree = percpu_counter_sum_positive(&sbi->s_freeblocks_counter); - buf->f_bavail = buf->f_bfree - le32_to_cpu(es->s_r_blocks_count); - if (buf->f_bfree < le32_to_cpu(es->s_r_blocks_count)) - buf->f_bavail = 0; - buf->f_files = le32_to_cpu(es->s_inodes_count); - buf->f_ffree = percpu_counter_sum_positive(&sbi->s_freeinodes_counter); - buf->f_namelen = EXT3_NAME_LEN; - fsid = le64_to_cpup((void *)es->s_uuid) ^ - le64_to_cpup((void *)es->s_uuid + sizeof(u64)); - buf->f_fsid.val[0] = fsid & 0xFFFFFFFFUL; - buf->f_fsid.val[1] = (fsid >> 32) & 0xFFFFFFFFUL; - return 0; -} - -/* Helper function for writing quotas on sync - we need to start transaction before quota file - * is locked for write. Otherwise the are possible deadlocks: - * Process 1 Process 2 - * ext3_create() quota_sync() - * journal_start() write_dquot() - * dquot_initialize() down(dqio_mutex) - * down(dqio_mutex) journal_start() - * - */ - -#ifdef CONFIG_QUOTA - -static inline struct inode *dquot_to_inode(struct dquot *dquot) -{ - return sb_dqopt(dquot->dq_sb)->files[dquot->dq_id.type]; -} - -static int ext3_write_dquot(struct dquot *dquot) -{ - int ret, err; - handle_t *handle; - struct inode *inode; - - inode = dquot_to_inode(dquot); - handle = ext3_journal_start(inode, - EXT3_QUOTA_TRANS_BLOCKS(dquot->dq_sb)); - if (IS_ERR(handle)) - return PTR_ERR(handle); - ret = dquot_commit(dquot); - err = ext3_journal_stop(handle); - if (!ret) - ret = err; - return ret; -} - -static int ext3_acquire_dquot(struct dquot *dquot) -{ - int ret, err; - handle_t *handle; - - handle = ext3_journal_start(dquot_to_inode(dquot), - EXT3_QUOTA_INIT_BLOCKS(dquot->dq_sb)); - if (IS_ERR(handle)) - return PTR_ERR(handle); - ret = dquot_acquire(dquot); - err = ext3_journal_stop(handle); - if (!ret) - ret = err; - return ret; -} - -static int ext3_release_dquot(struct dquot *dquot) -{ - int ret, err; - handle_t *handle; - - handle = ext3_journal_start(dquot_to_inode(dquot), - EXT3_QUOTA_DEL_BLOCKS(dquot->dq_sb)); - if (IS_ERR(handle)) { - /* Release dquot anyway to avoid endless cycle in dqput() */ - dquot_release(dquot); - return PTR_ERR(handle); - } - ret = dquot_release(dquot); - err = ext3_journal_stop(handle); - if (!ret) - ret = err; - return ret; -} - -static int ext3_mark_dquot_dirty(struct dquot *dquot) -{ - /* Are we journaling quotas? */ - if (EXT3_SB(dquot->dq_sb)->s_qf_names[USRQUOTA] || - EXT3_SB(dquot->dq_sb)->s_qf_names[GRPQUOTA]) { - dquot_mark_dquot_dirty(dquot); - return ext3_write_dquot(dquot); - } else { - return dquot_mark_dquot_dirty(dquot); - } -} - -static int ext3_write_info(struct super_block *sb, int type) -{ - int ret, err; - handle_t *handle; - - /* Data block + inode block */ - handle = ext3_journal_start(d_inode(sb->s_root), 2); - if (IS_ERR(handle)) - return PTR_ERR(handle); - ret = dquot_commit_info(sb, type); - err = ext3_journal_stop(handle); - if (!ret) - ret = err; - return ret; -} - -/* - * Turn on quotas during mount time - we need to find - * the quota file and such... - */ -static int ext3_quota_on_mount(struct super_block *sb, int type) -{ - return dquot_quota_on_mount(sb, EXT3_SB(sb)->s_qf_names[type], - EXT3_SB(sb)->s_jquota_fmt, type); -} - -/* - * Standard function to be called on quota_on - */ -static int ext3_quota_on(struct super_block *sb, int type, int format_id, - struct path *path) -{ - int err; - - if (!test_opt(sb, QUOTA)) - return -EINVAL; - - /* Quotafile not on the same filesystem? */ - if (path->dentry->d_sb != sb) - return -EXDEV; - /* Journaling quota? */ - if (EXT3_SB(sb)->s_qf_names[type]) { - /* Quotafile not of fs root? */ - if (path->dentry->d_parent != sb->s_root) - ext3_msg(sb, KERN_WARNING, - "warning: Quota file not on filesystem root. " - "Journaled quota will not work."); - } - - /* - * When we journal data on quota file, we have to flush journal to see - * all updates to the file when we bypass pagecache... - */ - if (ext3_should_journal_data(d_inode(path->dentry))) { - /* - * We don't need to lock updates but journal_flush() could - * otherwise be livelocked... - */ - journal_lock_updates(EXT3_SB(sb)->s_journal); - err = journal_flush(EXT3_SB(sb)->s_journal); - journal_unlock_updates(EXT3_SB(sb)->s_journal); - if (err) - return err; - } - - return dquot_quota_on(sb, type, format_id, path); -} - -/* Read data from quotafile - avoid pagecache and such because we cannot afford - * acquiring the locks... As quota files are never truncated and quota code - * itself serializes the operations (and no one else should touch the files) - * we don't have to be afraid of races */ -static ssize_t ext3_quota_read(struct super_block *sb, int type, char *data, - size_t len, loff_t off) -{ - struct inode *inode = sb_dqopt(sb)->files[type]; - sector_t blk = off >> EXT3_BLOCK_SIZE_BITS(sb); - int err = 0; - int offset = off & (sb->s_blocksize - 1); - int tocopy; - size_t toread; - struct buffer_head *bh; - loff_t i_size = i_size_read(inode); - - if (off > i_size) - return 0; - if (off+len > i_size) - len = i_size-off; - toread = len; - while (toread > 0) { - tocopy = sb->s_blocksize - offset < toread ? - sb->s_blocksize - offset : toread; - bh = ext3_bread(NULL, inode, blk, 0, &err); - if (err) - return err; - if (!bh) /* A hole? */ - memset(data, 0, tocopy); - else - memcpy(data, bh->b_data+offset, tocopy); - brelse(bh); - offset = 0; - toread -= tocopy; - data += tocopy; - blk++; - } - return len; -} - -/* Write to quotafile (we know the transaction is already started and has - * enough credits) */ -static ssize_t ext3_quota_write(struct super_block *sb, int type, - const char *data, size_t len, loff_t off) -{ - struct inode *inode = sb_dqopt(sb)->files[type]; - sector_t blk = off >> EXT3_BLOCK_SIZE_BITS(sb); - int err = 0; - int offset = off & (sb->s_blocksize - 1); - int journal_quota = EXT3_SB(sb)->s_qf_names[type] != NULL; - struct buffer_head *bh; - handle_t *handle = journal_current_handle(); - - if (!handle) { - ext3_msg(sb, KERN_WARNING, - "warning: quota write (off=%llu, len=%llu)" - " cancelled because transaction is not started.", - (unsigned long long)off, (unsigned long long)len); - return -EIO; - } - - /* - * Since we account only one data block in transaction credits, - * then it is impossible to cross a block boundary. - */ - if (sb->s_blocksize - offset < len) { - ext3_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)" - " cancelled because not block aligned", - (unsigned long long)off, (unsigned long long)len); - return -EIO; - } - bh = ext3_bread(handle, inode, blk, 1, &err); - if (!bh) - goto out; - if (journal_quota) { - err = ext3_journal_get_write_access(handle, bh); - if (err) { - brelse(bh); - goto out; - } - } - lock_buffer(bh); - memcpy(bh->b_data+offset, data, len); - flush_dcache_page(bh->b_page); - unlock_buffer(bh); - if (journal_quota) - err = ext3_journal_dirty_metadata(handle, bh); - else { - /* Always do at least ordered writes for quotas */ - err = ext3_journal_dirty_data(handle, bh); - mark_buffer_dirty(bh); - } - brelse(bh); -out: - if (err) - return err; - if (inode->i_size < off + len) { - i_size_write(inode, off + len); - EXT3_I(inode)->i_disksize = inode->i_size; - } - inode->i_version++; - inode->i_mtime = inode->i_ctime = CURRENT_TIME; - ext3_mark_inode_dirty(handle, inode); - return len; -} - -#endif - -static struct dentry *ext3_mount(struct file_system_type *fs_type, - int flags, const char *dev_name, void *data) -{ - return mount_bdev(fs_type, flags, dev_name, data, ext3_fill_super); -} - -static struct file_system_type ext3_fs_type = { - .owner = THIS_MODULE, - .name = "ext3", - .mount = ext3_mount, - .kill_sb = kill_block_super, - .fs_flags = FS_REQUIRES_DEV, -}; -MODULE_ALIAS_FS("ext3"); - -static int __init init_ext3_fs(void) -{ - int err = init_ext3_xattr(); - if (err) - return err; - err = init_inodecache(); - if (err) - goto out1; - err = register_filesystem(&ext3_fs_type); - if (err) - goto out; - return 0; -out: - destroy_inodecache(); -out1: - exit_ext3_xattr(); - return err; -} - -static void __exit exit_ext3_fs(void) -{ - unregister_filesystem(&ext3_fs_type); - destroy_inodecache(); - exit_ext3_xattr(); -} - -MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others"); -MODULE_DESCRIPTION("Second Extended Filesystem with journaling extensions"); -MODULE_LICENSE("GPL"); -module_init(init_ext3_fs) -module_exit(exit_ext3_fs) diff --git a/fs/ext3/symlink.c b/fs/ext3/symlink.c deleted file mode 100644 index c08c590..0000000 --- a/fs/ext3/symlink.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/fs/ext3/symlink.c - * - * Only fast symlinks left here - the rest is done by generic code. AV, 1999 - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/fs/minix/symlink.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * ext3 symlink handling code - */ - -#include "ext3.h" -#include "xattr.h" - -const struct inode_operations ext3_symlink_inode_operations = { - .readlink = generic_readlink, - .follow_link = page_follow_link_light, - .put_link = page_put_link, - .setattr = ext3_setattr, -#ifdef CONFIG_EXT3_FS_XATTR - .setxattr = generic_setxattr, - .getxattr = generic_getxattr, - .listxattr = ext3_listxattr, - .removexattr = generic_removexattr, -#endif -}; - -const struct inode_operations ext3_fast_symlink_inode_operations = { - .readlink = generic_readlink, - .follow_link = simple_follow_link, - .setattr = ext3_setattr, -#ifdef CONFIG_EXT3_FS_XATTR - .setxattr = generic_setxattr, - .getxattr = generic_getxattr, - .listxattr = ext3_listxattr, - .removexattr = generic_removexattr, -#endif -}; diff --git a/fs/ext3/xattr.c b/fs/ext3/xattr.c deleted file mode 100644 index 7cf3650..0000000 --- a/fs/ext3/xattr.c +++ /dev/null @@ -1,1330 +0,0 @@ -/* - * linux/fs/ext3/xattr.c - * - * Copyright (C) 2001-2003 Andreas Gruenbacher, <agruen@suse.de> - * - * Fix by Harrison Xing <harrison@mountainviewdata.com>. - * Ext3 code with a lot of help from Eric Jarman <ejarman@acm.org>. - * Extended attributes for symlinks and special files added per - * suggestion of Luka Renko <luka.renko@hermes.si>. - * xattr consolidation Copyright (c) 2004 James Morris <jmorris@redhat.com>, - * Red Hat Inc. - * ea-in-inode support by Alex Tomas <alex@clusterfs.com> aka bzzz - * and Andreas Gruenbacher <agruen@suse.de>. - */ - -/* - * Extended attributes are stored directly in inodes (on file systems with - * inodes bigger than 128 bytes) and on additional disk blocks. The i_file_acl - * field contains the block number if an inode uses an additional block. All - * attributes must fit in the inode and one additional block. Blocks that - * contain the identical set of attributes may be shared among several inodes. - * Identical blocks are detected by keeping a cache of blocks that have - * recently been accessed. - * - * The attributes in inodes and on blocks have a different header; the entries - * are stored in the same format: - * - * +------------------+ - * | header | - * | entry 1 | | - * | entry 2 | | growing downwards - * | entry 3 | v - * | four null bytes | - * | . . . | - * | value 1 | ^ - * | value 3 | | growing upwards - * | value 2 | | - * +------------------+ - * - * The header is followed by multiple entry descriptors. In disk blocks, the - * entry descriptors are kept sorted. In inodes, they are unsorted. The - * attribute values are aligned to the end of the block in no specific order. - * - * Locking strategy - * ---------------- - * EXT3_I(inode)->i_file_acl is protected by EXT3_I(inode)->xattr_sem. - * EA blocks are only changed if they are exclusive to an inode, so - * holding xattr_sem also means that nothing but the EA block's reference - * count can change. Multiple writers to the same block are synchronized - * by the buffer lock. - */ - -#include "ext3.h" -#include <linux/mbcache.h> -#include <linux/quotaops.h> -#include "xattr.h" -#include "acl.h" - -#define BHDR(bh) ((struct ext3_xattr_header *)((bh)->b_data)) -#define ENTRY(ptr) ((struct ext3_xattr_entry *)(ptr)) -#define BFIRST(bh) ENTRY(BHDR(bh)+1) -#define IS_LAST_ENTRY(entry) (*(__u32 *)(entry) == 0) - -#define IHDR(inode, raw_inode) \ - ((struct ext3_xattr_ibody_header *) \ - ((void *)raw_inode + \ - EXT3_GOOD_OLD_INODE_SIZE + \ - EXT3_I(inode)->i_extra_isize)) -#define IFIRST(hdr) ((struct ext3_xattr_entry *)((hdr)+1)) - -#ifdef EXT3_XATTR_DEBUG -# define ea_idebug(inode, f...) do { \ - printk(KERN_DEBUG "inode %s:%lu: ", \ - inode->i_sb->s_id, inode->i_ino); \ - printk(f); \ - printk("\n"); \ - } while (0) -# define ea_bdebug(bh, f...) do { \ - char b[BDEVNAME_SIZE]; \ - printk(KERN_DEBUG "block %s:%lu: ", \ - bdevname(bh->b_bdev, b), \ - (unsigned long) bh->b_blocknr); \ - printk(f); \ - printk("\n"); \ - } while (0) -#else -# define ea_idebug(f...) -# define ea_bdebug(f...) -#endif - -static void ext3_xattr_cache_insert(struct buffer_head *); -static struct buffer_head *ext3_xattr_cache_find(struct inode *, - struct ext3_xattr_header *, - struct mb_cache_entry **); -static void ext3_xattr_rehash(struct ext3_xattr_header *, - struct ext3_xattr_entry *); -static int ext3_xattr_list(struct dentry *dentry, char *buffer, - size_t buffer_size); - -static struct mb_cache *ext3_xattr_cache; - -static const struct xattr_handler *ext3_xattr_handler_map[] = { - [EXT3_XATTR_INDEX_USER] = &ext3_xattr_user_handler, -#ifdef CONFIG_EXT3_FS_POSIX_ACL - [EXT3_XATTR_INDEX_POSIX_ACL_ACCESS] = &posix_acl_access_xattr_handler, - [EXT3_XATTR_INDEX_POSIX_ACL_DEFAULT] = &posix_acl_default_xattr_handler, -#endif - [EXT3_XATTR_INDEX_TRUSTED] = &ext3_xattr_trusted_handler, -#ifdef CONFIG_EXT3_FS_SECURITY - [EXT3_XATTR_INDEX_SECURITY] = &ext3_xattr_security_handler, -#endif -}; - -const struct xattr_handler *ext3_xattr_handlers[] = { - &ext3_xattr_user_handler, - &ext3_xattr_trusted_handler, -#ifdef CONFIG_EXT3_FS_POSIX_ACL - &posix_acl_access_xattr_handler, - &posix_acl_default_xattr_handler, -#endif -#ifdef CONFIG_EXT3_FS_SECURITY - &ext3_xattr_security_handler, -#endif - NULL -}; - -static inline const struct xattr_handler * -ext3_xattr_handler(int name_index) -{ - const struct xattr_handler *handler = NULL; - - if (name_index > 0 && name_index < ARRAY_SIZE(ext3_xattr_handler_map)) - handler = ext3_xattr_handler_map[name_index]; - return handler; -} - -/* - * Inode operation listxattr() - * - * d_inode(dentry)->i_mutex: don't care - */ -ssize_t -ext3_listxattr(struct dentry *dentry, char *buffer, size_t size) -{ - return ext3_xattr_list(dentry, buffer, size); -} - -static int -ext3_xattr_check_names(struct ext3_xattr_entry *entry, void *end) -{ - while (!IS_LAST_ENTRY(entry)) { - struct ext3_xattr_entry *next = EXT3_XATTR_NEXT(entry); - if ((void *)next >= end) - return -EIO; - entry = next; - } - return 0; -} - -static inline int -ext3_xattr_check_block(struct buffer_head *bh) -{ - int error; - - if (BHDR(bh)->h_magic != cpu_to_le32(EXT3_XATTR_MAGIC) || - BHDR(bh)->h_blocks != cpu_to_le32(1)) - return -EIO; - error = ext3_xattr_check_names(BFIRST(bh), bh->b_data + bh->b_size); - return error; -} - -static inline int -ext3_xattr_check_entry(struct ext3_xattr_entry *entry, size_t size) -{ - size_t value_size = le32_to_cpu(entry->e_value_size); - - if (entry->e_value_block != 0 || value_size > size || - le16_to_cpu(entry->e_value_offs) + value_size > size) - return -EIO; - return 0; -} - -static int -ext3_xattr_find_entry(struct ext3_xattr_entry **pentry, int name_index, - const char *name, size_t size, int sorted) -{ - struct ext3_xattr_entry *entry; - size_t name_len; - int cmp = 1; - - if (name == NULL) - return -EINVAL; - name_len = strlen(name); - entry = *pentry; - for (; !IS_LAST_ENTRY(entry); entry = EXT3_XATTR_NEXT(entry)) { - cmp = name_index - entry->e_name_index; - if (!cmp) - cmp = name_len - entry->e_name_len; - if (!cmp) - cmp = memcmp(name, entry->e_name, name_len); - if (cmp <= 0 && (sorted || cmp == 0)) - break; - } - *pentry = entry; - if (!cmp && ext3_xattr_check_entry(entry, size)) - return -EIO; - return cmp ? -ENODATA : 0; -} - -static int -ext3_xattr_block_get(struct inode *inode, int name_index, const char *name, - void *buffer, size_t buffer_size) -{ - struct buffer_head *bh = NULL; - struct ext3_xattr_entry *entry; - size_t size; - int error; - - ea_idebug(inode, "name=%d.%s, buffer=%p, buffer_size=%ld", - name_index, name, buffer, (long)buffer_size); - - error = -ENODATA; - if (!EXT3_I(inode)->i_file_acl) - goto cleanup; - ea_idebug(inode, "reading block %u", EXT3_I(inode)->i_file_acl); - bh = sb_bread(inode->i_sb, EXT3_I(inode)->i_file_acl); - if (!bh) - goto cleanup; - ea_bdebug(bh, "b_count=%d, refcount=%d", - atomic_read(&(bh->b_count)), le32_to_cpu(BHDR(bh)->h_refcount)); - if (ext3_xattr_check_block(bh)) { -bad_block: ext3_error(inode->i_sb, __func__, - "inode %lu: bad block "E3FSBLK, inode->i_ino, - EXT3_I(inode)->i_file_acl); - error = -EIO; - goto cleanup; - } - ext3_xattr_cache_insert(bh); - entry = BFIRST(bh); - error = ext3_xattr_find_entry(&entry, name_index, name, bh->b_size, 1); - if (error == -EIO) - goto bad_block; - if (error) - goto cleanup; - size = le32_to_cpu(entry->e_value_size); - if (buffer) { - error = -ERANGE; - if (size > buffer_size) - goto cleanup; - memcpy(buffer, bh->b_data + le16_to_cpu(entry->e_value_offs), - size); - } - error = size; - -cleanup: - brelse(bh); - return error; -} - -static int -ext3_xattr_ibody_get(struct inode *inode, int name_index, const char *name, - void *buffer, size_t buffer_size) -{ - struct ext3_xattr_ibody_header *header; - struct ext3_xattr_entry *entry; - struct ext3_inode *raw_inode; - struct ext3_iloc iloc; - size_t size; - void *end; - int error; - - if (!ext3_test_inode_state(inode, EXT3_STATE_XATTR)) - return -ENODATA; - error = ext3_get_inode_loc(inode, &iloc); - if (error) - return error; - raw_inode = ext3_raw_inode(&iloc); - header = IHDR(inode, raw_inode); - entry = IFIRST(header); - end = (void *)raw_inode + EXT3_SB(inode->i_sb)->s_inode_size; - error = ext3_xattr_check_names(entry, end); - if (error) - goto cleanup; - error = ext3_xattr_find_entry(&entry, name_index, name, - end - (void *)entry, 0); - if (error) - goto cleanup; - size = le32_to_cpu(entry->e_value_size); - if (buffer) { - error = -ERANGE; - if (size > buffer_size) - goto cleanup; - memcpy(buffer, (void *)IFIRST(header) + - le16_to_cpu(entry->e_value_offs), size); - } - error = size; - -cleanup: - brelse(iloc.bh); - return error; -} - -/* - * ext3_xattr_get() - * - * Copy an extended attribute into the buffer - * provided, or compute the buffer size required. - * Buffer is NULL to compute the size of the buffer required. - * - * Returns a negative error number on failure, or the number of bytes - * used / required on success. - */ -int -ext3_xattr_get(struct inode *inode, int name_index, const char *name, - void *buffer, size_t buffer_size) -{ - int error; - - down_read(&EXT3_I(inode)->xattr_sem); - error = ext3_xattr_ibody_get(inode, name_index, name, buffer, - buffer_size); - if (error == -ENODATA) - error = ext3_xattr_block_get(inode, name_index, name, buffer, - buffer_size); - up_read(&EXT3_I(inode)->xattr_sem); - return error; -} - -static int -ext3_xattr_list_entries(struct dentry *dentry, struct ext3_xattr_entry *entry, - char *buffer, size_t buffer_size) -{ - size_t rest = buffer_size; - - for (; !IS_LAST_ENTRY(entry); entry = EXT3_XATTR_NEXT(entry)) { - const struct xattr_handler *handler = - ext3_xattr_handler(entry->e_name_index); - - if (handler) { - size_t size = handler->list(dentry, buffer, rest, - entry->e_name, - entry->e_name_len, - handler->flags); - if (buffer) { - if (size > rest) - return -ERANGE; - buffer += size; - } - rest -= size; - } - } - return buffer_size - rest; -} - -static int -ext3_xattr_block_list(struct dentry *dentry, char *buffer, size_t buffer_size) -{ - struct inode *inode = d_inode(dentry); - struct buffer_head *bh = NULL; - int error; - - ea_idebug(inode, "buffer=%p, buffer_size=%ld", - buffer, (long)buffer_size); - - error = 0; - if (!EXT3_I(inode)->i_file_acl) - goto cleanup; - ea_idebug(inode, "reading block %u", EXT3_I(inode)->i_file_acl); - bh = sb_bread(inode->i_sb, EXT3_I(inode)->i_file_acl); - error = -EIO; - if (!bh) - goto cleanup; - ea_bdebug(bh, "b_count=%d, refcount=%d", - atomic_read(&(bh->b_count)), le32_to_cpu(BHDR(bh)->h_refcount)); - if (ext3_xattr_check_block(bh)) { - ext3_error(inode->i_sb, __func__, - "inode %lu: bad block "E3FSBLK, inode->i_ino, - EXT3_I(inode)->i_file_acl); - error = -EIO; - goto cleanup; - } - ext3_xattr_cache_insert(bh); - error = ext3_xattr_list_entries(dentry, BFIRST(bh), buffer, buffer_size); - -cleanup: - brelse(bh); - - return error; -} - -static int -ext3_xattr_ibody_list(struct dentry *dentry, char *buffer, size_t buffer_size) -{ - struct inode *inode = d_inode(dentry); - struct ext3_xattr_ibody_header *header; - struct ext3_inode *raw_inode; - struct ext3_iloc iloc; - void *end; - int error; - - if (!ext3_test_inode_state(inode, EXT3_STATE_XATTR)) - return 0; - error = ext3_get_inode_loc(inode, &iloc); - if (error) - return error; - raw_inode = ext3_raw_inode(&iloc); - header = IHDR(inode, raw_inode); - end = (void *)raw_inode + EXT3_SB(inode->i_sb)->s_inode_size; - error = ext3_xattr_check_names(IFIRST(header), end); - if (error) - goto cleanup; - error = ext3_xattr_list_entries(dentry, IFIRST(header), - buffer, buffer_size); - -cleanup: - brelse(iloc.bh); - return error; -} - -/* - * ext3_xattr_list() - * - * Copy a list of attribute names into the buffer - * provided, or compute the buffer size required. - * Buffer is NULL to compute the size of the buffer required. - * - * Returns a negative error number on failure, or the number of bytes - * used / required on success. - */ -static int -ext3_xattr_list(struct dentry *dentry, char *buffer, size_t buffer_size) -{ - int i_error, b_error; - - down_read(&EXT3_I(d_inode(dentry))->xattr_sem); - i_error = ext3_xattr_ibody_list(dentry, buffer, buffer_size); - if (i_error < 0) { - b_error = 0; - } else { - if (buffer) { - buffer += i_error; - buffer_size -= i_error; - } - b_error = ext3_xattr_block_list(dentry, buffer, buffer_size); - if (b_error < 0) - i_error = 0; - } - up_read(&EXT3_I(d_inode(dentry))->xattr_sem); - return i_error + b_error; -} - -/* - * If the EXT3_FEATURE_COMPAT_EXT_ATTR feature of this file system is - * not set, set it. - */ -static void ext3_xattr_update_super_block(handle_t *handle, - struct super_block *sb) -{ - if (EXT3_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_EXT_ATTR)) - return; - - if (ext3_journal_get_write_access(handle, EXT3_SB(sb)->s_sbh) == 0) { - EXT3_SET_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_EXT_ATTR); - ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh); - } -} - -/* - * Release the xattr block BH: If the reference count is > 1, decrement - * it; otherwise free the block. - */ -static void -ext3_xattr_release_block(handle_t *handle, struct inode *inode, - struct buffer_head *bh) -{ - struct mb_cache_entry *ce = NULL; - int error = 0; - - ce = mb_cache_entry_get(ext3_xattr_cache, bh->b_bdev, bh->b_blocknr); - error = ext3_journal_get_write_access(handle, bh); - if (error) - goto out; - - lock_buffer(bh); - - if (BHDR(bh)->h_refcount == cpu_to_le32(1)) { - ea_bdebug(bh, "refcount now=0; freeing"); - if (ce) - mb_cache_entry_free(ce); - ext3_free_blocks(handle, inode, bh->b_blocknr, 1); - get_bh(bh); - ext3_forget(handle, 1, inode, bh, bh->b_blocknr); - } else { - le32_add_cpu(&BHDR(bh)->h_refcount, -1); - error = ext3_journal_dirty_metadata(handle, bh); - if (IS_SYNC(inode)) - handle->h_sync = 1; - dquot_free_block(inode, 1); - ea_bdebug(bh, "refcount now=%d; releasing", - le32_to_cpu(BHDR(bh)->h_refcount)); - if (ce) - mb_cache_entry_release(ce); - } - unlock_buffer(bh); -out: - ext3_std_error(inode->i_sb, error); - return; -} - -struct ext3_xattr_info { - int name_index; - const char *name; - const void *value; - size_t value_len; -}; - -struct ext3_xattr_search { - struct ext3_xattr_entry *first; - void *base; - void *end; - struct ext3_xattr_entry *here; - int not_found; -}; - -static int -ext3_xattr_set_entry(struct ext3_xattr_info *i, struct ext3_xattr_search *s) -{ - struct ext3_xattr_entry *last; - size_t free, min_offs = s->end - s->base, name_len = strlen(i->name); - - /* Compute min_offs and last. */ - last = s->first; - for (; !IS_LAST_ENTRY(last); last = EXT3_XATTR_NEXT(last)) { - if (!last->e_value_block && last->e_value_size) { - size_t offs = le16_to_cpu(last->e_value_offs); - if (offs < min_offs) - min_offs = offs; - } - } - free = min_offs - ((void *)last - s->base) - sizeof(__u32); - if (!s->not_found) { - if (!s->here->e_value_block && s->here->e_value_size) { - size_t size = le32_to_cpu(s->here->e_value_size); - free += EXT3_XATTR_SIZE(size); - } - free += EXT3_XATTR_LEN(name_len); - } - if (i->value) { - if (free < EXT3_XATTR_LEN(name_len) + - EXT3_XATTR_SIZE(i->value_len)) - return -ENOSPC; - } - - if (i->value && s->not_found) { - /* Insert the new name. */ - size_t size = EXT3_XATTR_LEN(name_len); - size_t rest = (void *)last - (void *)s->here + sizeof(__u32); - memmove((void *)s->here + size, s->here, rest); - memset(s->here, 0, size); - s->here->e_name_index = i->name_index; - s->here->e_name_len = name_len; - memcpy(s->here->e_name, i->name, name_len); - } else { - if (!s->here->e_value_block && s->here->e_value_size) { - void *first_val = s->base + min_offs; - size_t offs = le16_to_cpu(s->here->e_value_offs); - void *val = s->base + offs; - size_t size = EXT3_XATTR_SIZE( - le32_to_cpu(s->here->e_value_size)); - - if (i->value && size == EXT3_XATTR_SIZE(i->value_len)) { - /* The old and the new value have the same - size. Just replace. */ - s->here->e_value_size = - cpu_to_le32(i->value_len); - memset(val + size - EXT3_XATTR_PAD, 0, - EXT3_XATTR_PAD); /* Clear pad bytes. */ - memcpy(val, i->value, i->value_len); - return 0; - } - - /* Remove the old value. */ - memmove(first_val + size, first_val, val - first_val); - memset(first_val, 0, size); - s->here->e_value_size = 0; - s->here->e_value_offs = 0; - min_offs += size; - - /* Adjust all value offsets. */ - last = s->first; - while (!IS_LAST_ENTRY(last)) { - size_t o = le16_to_cpu(last->e_value_offs); - if (!last->e_value_block && - last->e_value_size && o < offs) - last->e_value_offs = - cpu_to_le16(o + size); - last = EXT3_XATTR_NEXT(last); - } - } - if (!i->value) { - /* Remove the old name. */ - size_t size = EXT3_XATTR_LEN(name_len); - last = ENTRY((void *)last - size); - memmove(s->here, (void *)s->here + size, - (void *)last - (void *)s->here + sizeof(__u32)); - memset(last, 0, size); - } - } - - if (i->value) { - /* Insert the new value. */ - s->here->e_value_size = cpu_to_le32(i->value_len); - if (i->value_len) { - size_t size = EXT3_XATTR_SIZE(i->value_len); - void *val = s->base + min_offs - size; - s->here->e_value_offs = cpu_to_le16(min_offs - size); - memset(val + size - EXT3_XATTR_PAD, 0, - EXT3_XATTR_PAD); /* Clear the pad bytes. */ - memcpy(val, i->value, i->value_len); - } - } - return 0; -} - -struct ext3_xattr_block_find { - struct ext3_xattr_search s; - struct buffer_head *bh; -}; - -static int -ext3_xattr_block_find(struct inode *inode, struct ext3_xattr_info *i, - struct ext3_xattr_block_find *bs) -{ - struct super_block *sb = inode->i_sb; - int error; - - ea_idebug(inode, "name=%d.%s, value=%p, value_len=%ld", - i->name_index, i->name, i->value, (long)i->value_len); - - if (EXT3_I(inode)->i_file_acl) { - /* The inode already has an extended attribute block. */ - bs->bh = sb_bread(sb, EXT3_I(inode)->i_file_acl); - error = -EIO; - if (!bs->bh) - goto cleanup; - ea_bdebug(bs->bh, "b_count=%d, refcount=%d", - atomic_read(&(bs->bh->b_count)), - le32_to_cpu(BHDR(bs->bh)->h_refcount)); - if (ext3_xattr_check_block(bs->bh)) { - ext3_error(sb, __func__, - "inode %lu: bad block "E3FSBLK, inode->i_ino, - EXT3_I(inode)->i_file_acl); - error = -EIO; - goto cleanup; - } - /* Find the named attribute. */ - bs->s.base = BHDR(bs->bh); - bs->s.first = BFIRST(bs->bh); - bs->s.end = bs->bh->b_data + bs->bh->b_size; - bs->s.here = bs->s.first; - error = ext3_xattr_find_entry(&bs->s.here, i->name_index, - i->name, bs->bh->b_size, 1); - if (error && error != -ENODATA) - goto cleanup; - bs->s.not_found = error; - } - error = 0; - -cleanup: - return error; -} - -static int -ext3_xattr_block_set(handle_t *handle, struct inode *inode, - struct ext3_xattr_info *i, - struct ext3_xattr_block_find *bs) -{ - struct super_block *sb = inode->i_sb; - struct buffer_head *new_bh = NULL; - struct ext3_xattr_search *s = &bs->s; - struct mb_cache_entry *ce = NULL; - int error = 0; - -#define header(x) ((struct ext3_xattr_header *)(x)) - - if (i->value && i->value_len > sb->s_blocksize) - return -ENOSPC; - if (s->base) { - ce = mb_cache_entry_get(ext3_xattr_cache, bs->bh->b_bdev, - bs->bh->b_blocknr); - error = ext3_journal_get_write_access(handle, bs->bh); - if (error) - goto cleanup; - lock_buffer(bs->bh); - - if (header(s->base)->h_refcount == cpu_to_le32(1)) { - if (ce) { - mb_cache_entry_free(ce); - ce = NULL; - } - ea_bdebug(bs->bh, "modifying in-place"); - error = ext3_xattr_set_entry(i, s); - if (!error) { - if (!IS_LAST_ENTRY(s->first)) - ext3_xattr_rehash(header(s->base), - s->here); - ext3_xattr_cache_insert(bs->bh); - } - unlock_buffer(bs->bh); - if (error == -EIO) - goto bad_block; - if (!error) - error = ext3_journal_dirty_metadata(handle, - bs->bh); - if (error) - goto cleanup; - goto inserted; - } else { - int offset = (char *)s->here - bs->bh->b_data; - - unlock_buffer(bs->bh); - journal_release_buffer(handle, bs->bh); - - if (ce) { - mb_cache_entry_release(ce); - ce = NULL; - } - ea_bdebug(bs->bh, "cloning"); - s->base = kmalloc(bs->bh->b_size, GFP_NOFS); - error = -ENOMEM; - if (s->base == NULL) - goto cleanup; - memcpy(s->base, BHDR(bs->bh), bs->bh->b_size); - s->first = ENTRY(header(s->base)+1); - header(s->base)->h_refcount = cpu_to_le32(1); - s->here = ENTRY(s->base + offset); - s->end = s->base + bs->bh->b_size; - } - } else { - /* Allocate a buffer where we construct the new block. */ - s->base = kzalloc(sb->s_blocksize, GFP_NOFS); - /* assert(header == s->base) */ - error = -ENOMEM; - if (s->base == NULL) - goto cleanup; - header(s->base)->h_magic = cpu_to_le32(EXT3_XATTR_MAGIC); - header(s->base)->h_blocks = cpu_to_le32(1); - header(s->base)->h_refcount = cpu_to_le32(1); - s->first = ENTRY(header(s->base)+1); - s->here = ENTRY(header(s->base)+1); - s->end = s->base + sb->s_blocksize; - } - - error = ext3_xattr_set_entry(i, s); - if (error == -EIO) - goto bad_block; - if (error) - goto cleanup; - if (!IS_LAST_ENTRY(s->first)) - ext3_xattr_rehash(header(s->base), s->here); - -inserted: - if (!IS_LAST_ENTRY(s->first)) { - new_bh = ext3_xattr_cache_find(inode, header(s->base), &ce); - if (new_bh) { - /* We found an identical block in the cache. */ - if (new_bh == bs->bh) - ea_bdebug(new_bh, "keeping"); - else { - /* The old block is released after updating - the inode. */ - error = dquot_alloc_block(inode, 1); - if (error) - goto cleanup; - error = ext3_journal_get_write_access(handle, - new_bh); - if (error) - goto cleanup_dquot; - lock_buffer(new_bh); - le32_add_cpu(&BHDR(new_bh)->h_refcount, 1); - ea_bdebug(new_bh, "reusing; refcount now=%d", - le32_to_cpu(BHDR(new_bh)->h_refcount)); - unlock_buffer(new_bh); - error = ext3_journal_dirty_metadata(handle, - new_bh); - if (error) - goto cleanup_dquot; - } - mb_cache_entry_release(ce); - ce = NULL; - } else if (bs->bh && s->base == bs->bh->b_data) { - /* We were modifying this block in-place. */ - ea_bdebug(bs->bh, "keeping this block"); - new_bh = bs->bh; - get_bh(new_bh); - } else { - /* We need to allocate a new block */ - ext3_fsblk_t goal = ext3_group_first_block_no(sb, - EXT3_I(inode)->i_block_group); - ext3_fsblk_t block; - - /* - * Protect us agaist concurrent allocations to the - * same inode from ext3_..._writepage(). Reservation - * code does not expect racing allocations. - */ - mutex_lock(&EXT3_I(inode)->truncate_mutex); - block = ext3_new_block(handle, inode, goal, &error); - mutex_unlock(&EXT3_I(inode)->truncate_mutex); - if (error) - goto cleanup; - ea_idebug(inode, "creating block %d", block); - - new_bh = sb_getblk(sb, block); - if (unlikely(!new_bh)) { -getblk_failed: - ext3_free_blocks(handle, inode, block, 1); - error = -ENOMEM; - goto cleanup; - } - lock_buffer(new_bh); - error = ext3_journal_get_create_access(handle, new_bh); - if (error) { - unlock_buffer(new_bh); - goto getblk_failed; - } - memcpy(new_bh->b_data, s->base, new_bh->b_size); - set_buffer_uptodate(new_bh); - unlock_buffer(new_bh); - ext3_xattr_cache_insert(new_bh); - error = ext3_journal_dirty_metadata(handle, new_bh); - if (error) - goto cleanup; - } - } - - /* Update the inode. */ - EXT3_I(inode)->i_file_acl = new_bh ? new_bh->b_blocknr : 0; - - /* Drop the previous xattr block. */ - if (bs->bh && bs->bh != new_bh) - ext3_xattr_release_block(handle, inode, bs->bh); - error = 0; - -cleanup: - if (ce) - mb_cache_entry_release(ce); - brelse(new_bh); - if (!(bs->bh && s->base == bs->bh->b_data)) - kfree(s->base); - - return error; - -cleanup_dquot: - dquot_free_block(inode, 1); - goto cleanup; - -bad_block: - ext3_error(inode->i_sb, __func__, - "inode %lu: bad block "E3FSBLK, inode->i_ino, - EXT3_I(inode)->i_file_acl); - goto cleanup; - -#undef header -} - -struct ext3_xattr_ibody_find { - struct ext3_xattr_search s; - struct ext3_iloc iloc; -}; - -static int -ext3_xattr_ibody_find(struct inode *inode, struct ext3_xattr_info *i, - struct ext3_xattr_ibody_find *is) -{ - struct ext3_xattr_ibody_header *header; - struct ext3_inode *raw_inode; - int error; - - if (EXT3_I(inode)->i_extra_isize == 0) - return 0; - raw_inode = ext3_raw_inode(&is->iloc); - header = IHDR(inode, raw_inode); - is->s.base = is->s.first = IFIRST(header); - is->s.here = is->s.first; - is->s.end = (void *)raw_inode + EXT3_SB(inode->i_sb)->s_inode_size; - if (ext3_test_inode_state(inode, EXT3_STATE_XATTR)) { - error = ext3_xattr_check_names(IFIRST(header), is->s.end); - if (error) - return error; - /* Find the named attribute. */ - error = ext3_xattr_find_entry(&is->s.here, i->name_index, - i->name, is->s.end - - (void *)is->s.base, 0); - if (error && error != -ENODATA) - return error; - is->s.not_found = error; - } - return 0; -} - -static int -ext3_xattr_ibody_set(handle_t *handle, struct inode *inode, - struct ext3_xattr_info *i, - struct ext3_xattr_ibody_find *is) -{ - struct ext3_xattr_ibody_header *header; - struct ext3_xattr_search *s = &is->s; - int error; - - if (EXT3_I(inode)->i_extra_isize == 0) - return -ENOSPC; - error = ext3_xattr_set_entry(i, s); - if (error) - return error; - header = IHDR(inode, ext3_raw_inode(&is->iloc)); - if (!IS_LAST_ENTRY(s->first)) { - header->h_magic = cpu_to_le32(EXT3_XATTR_MAGIC); - ext3_set_inode_state(inode, EXT3_STATE_XATTR); - } else { - header->h_magic = cpu_to_le32(0); - ext3_clear_inode_state(inode, EXT3_STATE_XATTR); - } - return 0; -} - -/* - * ext3_xattr_set_handle() - * - * Create, replace or remove an extended attribute for this inode. Value - * is NULL to remove an existing extended attribute, and non-NULL to - * either replace an existing extended attribute, or create a new extended - * attribute. The flags XATTR_REPLACE and XATTR_CREATE - * specify that an extended attribute must exist and must not exist - * previous to the call, respectively. - * - * Returns 0, or a negative error number on failure. - */ -int -ext3_xattr_set_handle(handle_t *handle, struct inode *inode, int name_index, - const char *name, const void *value, size_t value_len, - int flags) -{ - struct ext3_xattr_info i = { - .name_index = name_index, - .name = name, - .value = value, - .value_len = value_len, - - }; - struct ext3_xattr_ibody_find is = { - .s = { .not_found = -ENODATA, }, - }; - struct ext3_xattr_block_find bs = { - .s = { .not_found = -ENODATA, }, - }; - int error; - - if (!name) - return -EINVAL; - if (strlen(name) > 255) - return -ERANGE; - down_write(&EXT3_I(inode)->xattr_sem); - error = ext3_get_inode_loc(inode, &is.iloc); - if (error) - goto cleanup; - - error = ext3_journal_get_write_access(handle, is.iloc.bh); - if (error) - goto cleanup; - - if (ext3_test_inode_state(inode, EXT3_STATE_NEW)) { - struct ext3_inode *raw_inode = ext3_raw_inode(&is.iloc); - memset(raw_inode, 0, EXT3_SB(inode->i_sb)->s_inode_size); - ext3_clear_inode_state(inode, EXT3_STATE_NEW); - } - - error = ext3_xattr_ibody_find(inode, &i, &is); - if (error) - goto cleanup; - if (is.s.not_found) - error = ext3_xattr_block_find(inode, &i, &bs); - if (error) - goto cleanup; - if (is.s.not_found && bs.s.not_found) { - error = -ENODATA; - if (flags & XATTR_REPLACE) - goto cleanup; - error = 0; - if (!value) - goto cleanup; - } else { - error = -EEXIST; - if (flags & XATTR_CREATE) - goto cleanup; - } - if (!value) { - if (!is.s.not_found) - error = ext3_xattr_ibody_set(handle, inode, &i, &is); - else if (!bs.s.not_found) - error = ext3_xattr_block_set(handle, inode, &i, &bs); - } else { - error = ext3_xattr_ibody_set(handle, inode, &i, &is); - if (!error && !bs.s.not_found) { - i.value = NULL; - error = ext3_xattr_block_set(handle, inode, &i, &bs); - } else if (error == -ENOSPC) { - if (EXT3_I(inode)->i_file_acl && !bs.s.base) { - error = ext3_xattr_block_find(inode, &i, &bs); - if (error) - goto cleanup; - } - error = ext3_xattr_block_set(handle, inode, &i, &bs); - if (error) - goto cleanup; - if (!is.s.not_found) { - i.value = NULL; - error = ext3_xattr_ibody_set(handle, inode, &i, - &is); - } - } - } - if (!error) { - ext3_xattr_update_super_block(handle, inode->i_sb); - inode->i_ctime = CURRENT_TIME_SEC; - error = ext3_mark_iloc_dirty(handle, inode, &is.iloc); - /* - * The bh is consumed by ext3_mark_iloc_dirty, even with - * error != 0. - */ - is.iloc.bh = NULL; - if (IS_SYNC(inode)) - handle->h_sync = 1; - } - -cleanup: - brelse(is.iloc.bh); - brelse(bs.bh); - up_write(&EXT3_I(inode)->xattr_sem); - return error; -} - -/* - * ext3_xattr_set() - * - * Like ext3_xattr_set_handle, but start from an inode. This extended - * attribute modification is a filesystem transaction by itself. - * - * Returns 0, or a negative error number on failure. - */ -int -ext3_xattr_set(struct inode *inode, int name_index, const char *name, - const void *value, size_t value_len, int flags) -{ - handle_t *handle; - int error, retries = 0; - -retry: - handle = ext3_journal_start(inode, EXT3_DATA_TRANS_BLOCKS(inode->i_sb)); - if (IS_ERR(handle)) { - error = PTR_ERR(handle); - } else { - int error2; - - error = ext3_xattr_set_handle(handle, inode, name_index, name, - value, value_len, flags); - error2 = ext3_journal_stop(handle); - if (error == -ENOSPC && - ext3_should_retry_alloc(inode->i_sb, &retries)) - goto retry; - if (error == 0) - error = error2; - } - - return error; -} - -/* - * ext3_xattr_delete_inode() - * - * Free extended attribute resources associated with this inode. This - * is called immediately before an inode is freed. We have exclusive - * access to the inode. - */ -void -ext3_xattr_delete_inode(handle_t *handle, struct inode *inode) -{ - struct buffer_head *bh = NULL; - - if (!EXT3_I(inode)->i_file_acl) - goto cleanup; - bh = sb_bread(inode->i_sb, EXT3_I(inode)->i_file_acl); - if (!bh) { - ext3_error(inode->i_sb, __func__, - "inode %lu: block "E3FSBLK" read error", inode->i_ino, - EXT3_I(inode)->i_file_acl); - goto cleanup; - } - if (BHDR(bh)->h_magic != cpu_to_le32(EXT3_XATTR_MAGIC) || - BHDR(bh)->h_blocks != cpu_to_le32(1)) { - ext3_error(inode->i_sb, __func__, - "inode %lu: bad block "E3FSBLK, inode->i_ino, - EXT3_I(inode)->i_file_acl); - goto cleanup; - } - ext3_xattr_release_block(handle, inode, bh); - EXT3_I(inode)->i_file_acl = 0; - -cleanup: - brelse(bh); -} - -/* - * ext3_xattr_put_super() - * - * This is called when a file system is unmounted. - */ -void -ext3_xattr_put_super(struct super_block *sb) -{ - mb_cache_shrink(sb->s_bdev); -} - -/* - * ext3_xattr_cache_insert() - * - * Create a new entry in the extended attribute cache, and insert - * it unless such an entry is already in the cache. - * - * Returns 0, or a negative error number on failure. - */ -static void -ext3_xattr_cache_insert(struct buffer_head *bh) -{ - __u32 hash = le32_to_cpu(BHDR(bh)->h_hash); - struct mb_cache_entry *ce; - int error; - - ce = mb_cache_entry_alloc(ext3_xattr_cache, GFP_NOFS); - if (!ce) { - ea_bdebug(bh, "out of memory"); - return; - } - error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, hash); - if (error) { - mb_cache_entry_free(ce); - if (error == -EBUSY) { - ea_bdebug(bh, "already in cache"); - error = 0; - } - } else { - ea_bdebug(bh, "inserting [%x]", (int)hash); - mb_cache_entry_release(ce); - } -} - -/* - * ext3_xattr_cmp() - * - * Compare two extended attribute blocks for equality. - * - * Returns 0 if the blocks are equal, 1 if they differ, and - * a negative error number on errors. - */ -static int -ext3_xattr_cmp(struct ext3_xattr_header *header1, - struct ext3_xattr_header *header2) -{ - struct ext3_xattr_entry *entry1, *entry2; - - entry1 = ENTRY(header1+1); - entry2 = ENTRY(header2+1); - while (!IS_LAST_ENTRY(entry1)) { - if (IS_LAST_ENTRY(entry2)) - return 1; - if (entry1->e_hash != entry2->e_hash || - entry1->e_name_index != entry2->e_name_index || - entry1->e_name_len != entry2->e_name_len || - entry1->e_value_size != entry2->e_value_size || - memcmp(entry1->e_name, entry2->e_name, entry1->e_name_len)) - return 1; - if (entry1->e_value_block != 0 || entry2->e_value_block != 0) - return -EIO; - if (memcmp((char *)header1 + le16_to_cpu(entry1->e_value_offs), - (char *)header2 + le16_to_cpu(entry2->e_value_offs), - le32_to_cpu(entry1->e_value_size))) - return 1; - - entry1 = EXT3_XATTR_NEXT(entry1); - entry2 = EXT3_XATTR_NEXT(entry2); - } - if (!IS_LAST_ENTRY(entry2)) - return 1; - return 0; -} - -/* - * ext3_xattr_cache_find() - * - * Find an identical extended attribute block. - * - * Returns a pointer to the block found, or NULL if such a block was - * not found or an error occurred. - */ -static struct buffer_head * -ext3_xattr_cache_find(struct inode *inode, struct ext3_xattr_header *header, - struct mb_cache_entry **pce) -{ - __u32 hash = le32_to_cpu(header->h_hash); - struct mb_cache_entry *ce; - - if (!header->h_hash) - return NULL; /* never share */ - ea_idebug(inode, "looking for cached blocks [%x]", (int)hash); -again: - ce = mb_cache_entry_find_first(ext3_xattr_cache, inode->i_sb->s_bdev, - hash); - while (ce) { - struct buffer_head *bh; - - if (IS_ERR(ce)) { - if (PTR_ERR(ce) == -EAGAIN) - goto again; - break; - } - bh = sb_bread(inode->i_sb, ce->e_block); - if (!bh) { - ext3_error(inode->i_sb, __func__, - "inode %lu: block %lu read error", - inode->i_ino, (unsigned long) ce->e_block); - } else if (le32_to_cpu(BHDR(bh)->h_refcount) >= - EXT3_XATTR_REFCOUNT_MAX) { - ea_idebug(inode, "block %lu refcount %d>=%d", - (unsigned long) ce->e_block, - le32_to_cpu(BHDR(bh)->h_refcount), - EXT3_XATTR_REFCOUNT_MAX); - } else if (ext3_xattr_cmp(header, BHDR(bh)) == 0) { - *pce = ce; - return bh; - } - brelse(bh); - ce = mb_cache_entry_find_next(ce, inode->i_sb->s_bdev, hash); - } - return NULL; -} - -#define NAME_HASH_SHIFT 5 -#define VALUE_HASH_SHIFT 16 - -/* - * ext3_xattr_hash_entry() - * - * Compute the hash of an extended attribute. - */ -static inline void ext3_xattr_hash_entry(struct ext3_xattr_header *header, - struct ext3_xattr_entry *entry) -{ - __u32 hash = 0; - char *name = entry->e_name; - int n; - - for (n=0; n < entry->e_name_len; n++) { - hash = (hash << NAME_HASH_SHIFT) ^ - (hash >> (8*sizeof(hash) - NAME_HASH_SHIFT)) ^ - *name++; - } - - if (entry->e_value_block == 0 && entry->e_value_size != 0) { - __le32 *value = (__le32 *)((char *)header + - le16_to_cpu(entry->e_value_offs)); - for (n = (le32_to_cpu(entry->e_value_size) + - EXT3_XATTR_ROUND) >> EXT3_XATTR_PAD_BITS; n; n--) { - hash = (hash << VALUE_HASH_SHIFT) ^ - (hash >> (8*sizeof(hash) - VALUE_HASH_SHIFT)) ^ - le32_to_cpu(*value++); - } - } - entry->e_hash = cpu_to_le32(hash); -} - -#undef NAME_HASH_SHIFT -#undef VALUE_HASH_SHIFT - -#define BLOCK_HASH_SHIFT 16 - -/* - * ext3_xattr_rehash() - * - * Re-compute the extended attribute hash value after an entry has changed. - */ -static void ext3_xattr_rehash(struct ext3_xattr_header *header, - struct ext3_xattr_entry *entry) -{ - struct ext3_xattr_entry *here; - __u32 hash = 0; - - ext3_xattr_hash_entry(header, entry); - here = ENTRY(header+1); - while (!IS_LAST_ENTRY(here)) { - if (!here->e_hash) { - /* Block is not shared if an entry's hash value == 0 */ - hash = 0; - break; - } - hash = (hash << BLOCK_HASH_SHIFT) ^ - (hash >> (8*sizeof(hash) - BLOCK_HASH_SHIFT)) ^ - le32_to_cpu(here->e_hash); - here = EXT3_XATTR_NEXT(here); - } - header->h_hash = cpu_to_le32(hash); -} - -#undef BLOCK_HASH_SHIFT - -int __init -init_ext3_xattr(void) -{ - ext3_xattr_cache = mb_cache_create("ext3_xattr", 6); - if (!ext3_xattr_cache) - return -ENOMEM; - return 0; -} - -void -exit_ext3_xattr(void) -{ - if (ext3_xattr_cache) - mb_cache_destroy(ext3_xattr_cache); - ext3_xattr_cache = NULL; -} diff --git a/fs/ext3/xattr.h b/fs/ext3/xattr.h deleted file mode 100644 index 32e93eb..0000000 --- a/fs/ext3/xattr.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - File: fs/ext3/xattr.h - - On-disk format of extended attributes for the ext3 filesystem. - - (C) 2001 Andreas Gruenbacher, <a.gruenbacher@computer.org> -*/ - -#include <linux/xattr.h> - -/* Magic value in attribute blocks */ -#define EXT3_XATTR_MAGIC 0xEA020000 - -/* Maximum number of references to one attribute block */ -#define EXT3_XATTR_REFCOUNT_MAX 1024 - -/* Name indexes */ -#define EXT3_XATTR_INDEX_USER 1 -#define EXT3_XATTR_INDEX_POSIX_ACL_ACCESS 2 -#define EXT3_XATTR_INDEX_POSIX_ACL_DEFAULT 3 -#define EXT3_XATTR_INDEX_TRUSTED 4 -#define EXT3_XATTR_INDEX_LUSTRE 5 -#define EXT3_XATTR_INDEX_SECURITY 6 - -struct ext3_xattr_header { - __le32 h_magic; /* magic number for identification */ - __le32 h_refcount; /* reference count */ - __le32 h_blocks; /* number of disk blocks used */ - __le32 h_hash; /* hash value of all attributes */ - __u32 h_reserved[4]; /* zero right now */ -}; - -struct ext3_xattr_ibody_header { - __le32 h_magic; /* magic number for identification */ -}; - -struct ext3_xattr_entry { - __u8 e_name_len; /* length of name */ - __u8 e_name_index; /* attribute name index */ - __le16 e_value_offs; /* offset in disk block of value */ - __le32 e_value_block; /* disk block attribute is stored on (n/i) */ - __le32 e_value_size; /* size of attribute value */ - __le32 e_hash; /* hash value of name and value */ - char e_name[0]; /* attribute name */ -}; - -#define EXT3_XATTR_PAD_BITS 2 -#define EXT3_XATTR_PAD (1<<EXT3_XATTR_PAD_BITS) -#define EXT3_XATTR_ROUND (EXT3_XATTR_PAD-1) -#define EXT3_XATTR_LEN(name_len) \ - (((name_len) + EXT3_XATTR_ROUND + \ - sizeof(struct ext3_xattr_entry)) & ~EXT3_XATTR_ROUND) -#define EXT3_XATTR_NEXT(entry) \ - ( (struct ext3_xattr_entry *)( \ - (char *)(entry) + EXT3_XATTR_LEN((entry)->e_name_len)) ) -#define EXT3_XATTR_SIZE(size) \ - (((size) + EXT3_XATTR_ROUND) & ~EXT3_XATTR_ROUND) - -# ifdef CONFIG_EXT3_FS_XATTR - -extern const struct xattr_handler ext3_xattr_user_handler; -extern const struct xattr_handler ext3_xattr_trusted_handler; -extern const struct xattr_handler ext3_xattr_security_handler; - -extern ssize_t ext3_listxattr(struct dentry *, char *, size_t); - -extern int ext3_xattr_get(struct inode *, int, const char *, void *, size_t); -extern int ext3_xattr_set(struct inode *, int, const char *, const void *, size_t, int); -extern int ext3_xattr_set_handle(handle_t *, struct inode *, int, const char *, const void *, size_t, int); - -extern void ext3_xattr_delete_inode(handle_t *, struct inode *); -extern void ext3_xattr_put_super(struct super_block *); - -extern int init_ext3_xattr(void); -extern void exit_ext3_xattr(void); - -extern const struct xattr_handler *ext3_xattr_handlers[]; - -# else /* CONFIG_EXT3_FS_XATTR */ - -static inline int -ext3_xattr_get(struct inode *inode, int name_index, const char *name, - void *buffer, size_t size, int flags) -{ - return -EOPNOTSUPP; -} - -static inline int -ext3_xattr_set(struct inode *inode, int name_index, const char *name, - const void *value, size_t size, int flags) -{ - return -EOPNOTSUPP; -} - -static inline int -ext3_xattr_set_handle(handle_t *handle, struct inode *inode, int name_index, - const char *name, const void *value, size_t size, int flags) -{ - return -EOPNOTSUPP; -} - -static inline void -ext3_xattr_delete_inode(handle_t *handle, struct inode *inode) -{ -} - -static inline void -ext3_xattr_put_super(struct super_block *sb) -{ -} - -static inline int -init_ext3_xattr(void) -{ - return 0; -} - -static inline void -exit_ext3_xattr(void) -{ -} - -#define ext3_xattr_handlers NULL - -# endif /* CONFIG_EXT3_FS_XATTR */ - -#ifdef CONFIG_EXT3_FS_SECURITY -extern int ext3_init_security(handle_t *handle, struct inode *inode, - struct inode *dir, const struct qstr *qstr); -#else -static inline int ext3_init_security(handle_t *handle, struct inode *inode, - struct inode *dir, const struct qstr *qstr) -{ - return 0; -} -#endif diff --git a/fs/ext3/xattr_security.c b/fs/ext3/xattr_security.c deleted file mode 100644 index c9506d5..0000000 --- a/fs/ext3/xattr_security.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * linux/fs/ext3/xattr_security.c - * Handler for storing security labels as extended attributes. - */ - -#include <linux/security.h> -#include "ext3.h" -#include "xattr.h" - -static size_t -ext3_xattr_security_list(struct dentry *dentry, char *list, size_t list_size, - const char *name, size_t name_len, int type) -{ - const size_t prefix_len = XATTR_SECURITY_PREFIX_LEN; - const size_t total_len = prefix_len + name_len + 1; - - - if (list && total_len <= list_size) { - memcpy(list, XATTR_SECURITY_PREFIX, prefix_len); - memcpy(list+prefix_len, name, name_len); - list[prefix_len + name_len] = '\0'; - } - return total_len; -} - -static int -ext3_xattr_security_get(struct dentry *dentry, const char *name, - void *buffer, size_t size, int type) -{ - if (strcmp(name, "") == 0) - return -EINVAL; - return ext3_xattr_get(d_inode(dentry), EXT3_XATTR_INDEX_SECURITY, - name, buffer, size); -} - -static int -ext3_xattr_security_set(struct dentry *dentry, const char *name, - const void *value, size_t size, int flags, int type) -{ - if (strcmp(name, "") == 0) - return -EINVAL; - return ext3_xattr_set(d_inode(dentry), EXT3_XATTR_INDEX_SECURITY, - name, value, size, flags); -} - -static int ext3_initxattrs(struct inode *inode, - const struct xattr *xattr_array, - void *fs_info) -{ - const struct xattr *xattr; - handle_t *handle = fs_info; - int err = 0; - - for (xattr = xattr_array; xattr->name != NULL; xattr++) { - err = ext3_xattr_set_handle(handle, inode, - EXT3_XATTR_INDEX_SECURITY, - xattr->name, xattr->value, - xattr->value_len, 0); - if (err < 0) - break; - } - return err; -} - -int -ext3_init_security(handle_t *handle, struct inode *inode, struct inode *dir, - const struct qstr *qstr) -{ - return security_inode_init_security(inode, dir, qstr, - &ext3_initxattrs, handle); -} - -const struct xattr_handler ext3_xattr_security_handler = { - .prefix = XATTR_SECURITY_PREFIX, - .list = ext3_xattr_security_list, - .get = ext3_xattr_security_get, - .set = ext3_xattr_security_set, -}; diff --git a/fs/ext3/xattr_trusted.c b/fs/ext3/xattr_trusted.c deleted file mode 100644 index 206cc66..0000000 --- a/fs/ext3/xattr_trusted.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/fs/ext3/xattr_trusted.c - * Handler for trusted extended attributes. - * - * Copyright (C) 2003 by Andreas Gruenbacher, <a.gruenbacher@computer.org> - */ - -#include "ext3.h" -#include "xattr.h" - -static size_t -ext3_xattr_trusted_list(struct dentry *dentry, char *list, size_t list_size, - const char *name, size_t name_len, int type) -{ - const size_t prefix_len = XATTR_TRUSTED_PREFIX_LEN; - const size_t total_len = prefix_len + name_len + 1; - - if (!capable(CAP_SYS_ADMIN)) - return 0; - - if (list && total_len <= list_size) { - memcpy(list, XATTR_TRUSTED_PREFIX, prefix_len); - memcpy(list+prefix_len, name, name_len); - list[prefix_len + name_len] = '\0'; - } - return total_len; -} - -static int -ext3_xattr_trusted_get(struct dentry *dentry, const char *name, - void *buffer, size_t size, int type) -{ - if (strcmp(name, "") == 0) - return -EINVAL; - return ext3_xattr_get(d_inode(dentry), EXT3_XATTR_INDEX_TRUSTED, - name, buffer, size); -} - -static int -ext3_xattr_trusted_set(struct dentry *dentry, const char *name, - const void *value, size_t size, int flags, int type) -{ - if (strcmp(name, "") == 0) - return -EINVAL; - return ext3_xattr_set(d_inode(dentry), EXT3_XATTR_INDEX_TRUSTED, name, - value, size, flags); -} - -const struct xattr_handler ext3_xattr_trusted_handler = { - .prefix = XATTR_TRUSTED_PREFIX, - .list = ext3_xattr_trusted_list, - .get = ext3_xattr_trusted_get, - .set = ext3_xattr_trusted_set, -}; diff --git a/fs/ext3/xattr_user.c b/fs/ext3/xattr_user.c deleted file mode 100644 index 021508a..0000000 --- a/fs/ext3/xattr_user.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * linux/fs/ext3/xattr_user.c - * Handler for extended user attributes. - * - * Copyright (C) 2001 by Andreas Gruenbacher, <a.gruenbacher@computer.org> - */ - -#include "ext3.h" -#include "xattr.h" - -static size_t -ext3_xattr_user_list(struct dentry *dentry, char *list, size_t list_size, - const char *name, size_t name_len, int type) -{ - const size_t prefix_len = XATTR_USER_PREFIX_LEN; - const size_t total_len = prefix_len + name_len + 1; - - if (!test_opt(dentry->d_sb, XATTR_USER)) - return 0; - - if (list && total_len <= list_size) { - memcpy(list, XATTR_USER_PREFIX, prefix_len); - memcpy(list+prefix_len, name, name_len); - list[prefix_len + name_len] = '\0'; - } - return total_len; -} - -static int -ext3_xattr_user_get(struct dentry *dentry, const char *name, void *buffer, - size_t size, int type) -{ - if (strcmp(name, "") == 0) - return -EINVAL; - if (!test_opt(dentry->d_sb, XATTR_USER)) - return -EOPNOTSUPP; - return ext3_xattr_get(d_inode(dentry), EXT3_XATTR_INDEX_USER, - name, buffer, size); -} - -static int -ext3_xattr_user_set(struct dentry *dentry, const char *name, - const void *value, size_t size, int flags, int type) -{ - if (strcmp(name, "") == 0) - return -EINVAL; - if (!test_opt(dentry->d_sb, XATTR_USER)) - return -EOPNOTSUPP; - return ext3_xattr_set(d_inode(dentry), EXT3_XATTR_INDEX_USER, - name, value, size, flags); -} - -const struct xattr_handler ext3_xattr_user_handler = { - .prefix = XATTR_USER_PREFIX, - .list = ext3_xattr_user_list, - .get = ext3_xattr_user_get, - .set = ext3_xattr_user_set, -}; diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig index bf8bc8a..219a190 100644 --- a/fs/ext4/Kconfig +++ b/fs/ext4/Kconfig @@ -1,5 +1,38 @@ +# Ext3 configs are here for backward compatibility with old configs which may +# have EXT3_FS set but not EXT4_FS set and thus would result in non-bootable +# kernels after the removal of ext3 driver. +config EXT3_FS + tristate "The Extended 3 (ext3) filesystem" + # These must match EXT4_FS selects... + select EXT4_FS + select JBD2 + select CRC16 + select CRYPTO + select CRYPTO_CRC32C + help + This config option is here only for backward compatibility. ext3 + filesystem is now handled by the ext4 driver. + +config EXT3_FS_POSIX_ACL + bool "Ext3 POSIX Access Control Lists" + depends on EXT3_FS + select EXT4_FS_POSIX_ACL + select FS_POSIX_ACL + help + This config option is here only for backward compatibility. ext3 + filesystem is now handled by the ext4 driver. + +config EXT3_FS_SECURITY + bool "Ext3 Security Labels" + depends on EXT3_FS + select EXT4_FS_SECURITY + help + This config option is here only for backward compatibility. ext3 + filesystem is now handled by the ext4 driver. + config EXT4_FS tristate "The Extended 4 (ext4) filesystem" + # Please update EXT3_FS selects when changing these select JBD2 select CRC16 select CRYPTO @@ -28,14 +61,14 @@ config EXT4_FS If unsure, say N. -config EXT4_USE_FOR_EXT23 +config EXT4_USE_FOR_EXT2 bool "Use ext4 for ext2/ext3 file systems" depends on EXT4_FS - depends on EXT3_FS=n || EXT2_FS=n + depends on EXT2_FS=n default y help - Allow the ext4 file system driver code to be used for ext2 or - ext3 file system mounts. This allows users to reduce their + Allow the ext4 file system driver code to be used for ext2 + file system mounts. This allows users to reduce their compiled kernel size by using one file system driver for ext2, ext3, and ext4 file systems. diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 58987b5..06b4b14 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -84,7 +84,7 @@ static void ext4_unregister_li_request(struct super_block *sb); static void ext4_clear_request_list(void); static int ext4_reserve_clusters(struct ext4_sb_info *, ext4_fsblk_t); -#if !defined(CONFIG_EXT2_FS) && !defined(CONFIG_EXT2_FS_MODULE) && defined(CONFIG_EXT4_USE_FOR_EXT23) +#if !defined(CONFIG_EXT2_FS) && !defined(CONFIG_EXT2_FS_MODULE) && defined(CONFIG_EXT4_USE_FOR_EXT2) static struct file_system_type ext2_fs_type = { .owner = THIS_MODULE, .name = "ext2", @@ -100,7 +100,6 @@ MODULE_ALIAS("ext2"); #endif -#if !defined(CONFIG_EXT3_FS) && !defined(CONFIG_EXT3_FS_MODULE) && defined(CONFIG_EXT4_USE_FOR_EXT23) static struct file_system_type ext3_fs_type = { .owner = THIS_MODULE, .name = "ext3", @@ -111,9 +110,6 @@ static struct file_system_type ext3_fs_type = { MODULE_ALIAS_FS("ext3"); MODULE_ALIAS("ext3"); #define IS_EXT3_SB(sb) ((sb)->s_bdev->bd_holder == &ext3_fs_type) -#else -#define IS_EXT3_SB(sb) (0) -#endif static int ext4_verify_csum_type(struct super_block *sb, struct ext4_super_block *es) @@ -5500,7 +5496,7 @@ static struct dentry *ext4_mount(struct file_system_type *fs_type, int flags, return mount_bdev(fs_type, flags, dev_name, data, ext4_fill_super); } -#if !defined(CONFIG_EXT2_FS) && !defined(CONFIG_EXT2_FS_MODULE) && defined(CONFIG_EXT4_USE_FOR_EXT23) +#if !defined(CONFIG_EXT2_FS) && !defined(CONFIG_EXT2_FS_MODULE) && defined(CONFIG_EXT4_USE_FOR_EXT2) static inline void register_as_ext2(void) { int err = register_filesystem(&ext2_fs_type); @@ -5530,7 +5526,6 @@ static inline void unregister_as_ext2(void) { } static inline int ext2_feature_set_ok(struct super_block *sb) { return 0; } #endif -#if !defined(CONFIG_EXT3_FS) && !defined(CONFIG_EXT3_FS_MODULE) && defined(CONFIG_EXT4_USE_FOR_EXT23) static inline void register_as_ext3(void) { int err = register_filesystem(&ext3_fs_type); @@ -5556,11 +5551,6 @@ static inline int ext3_feature_set_ok(struct super_block *sb) return 0; return 1; } -#else -static inline void register_as_ext3(void) { } -static inline void unregister_as_ext3(void) { } -static inline int ext3_feature_set_ok(struct super_block *sb) { return 0; } -#endif static struct file_system_type ext4_fs_type = { .owner = THIS_MODULE, diff --git a/fs/jbd/Kconfig b/fs/jbd/Kconfig deleted file mode 100644 index 4e28bee..0000000 --- a/fs/jbd/Kconfig +++ /dev/null @@ -1,30 +0,0 @@ -config JBD - tristate - help - This is a generic journalling layer for block devices. It is - currently used by the ext3 file system, but it could also be - used to add journal support to other file systems or block - devices such as RAID or LVM. - - If you are using the ext3 file system, you need to say Y here. - If you are not using ext3 then you will probably want to say N. - - To compile this device as a module, choose M here: the module will be - called jbd. If you are compiling ext3 into the kernel, you - cannot compile this code as a module. - -config JBD_DEBUG - bool "JBD (ext3) debugging support" - depends on JBD && DEBUG_FS - help - If you are using the ext3 journaled file system (or potentially any - other file system/device using JBD), this option allows you to - enable debugging output while the system is running, in order to - help track down any problems you are having. By default the - debugging output will be turned off. - - If you select Y here, then you will be able to turn on debugging - with "echo N > /sys/kernel/debug/jbd/jbd-debug", where N is a - number between 1 and 5, the higher the number, the more debugging - output is generated. To turn debugging off again, do - "echo 0 > /sys/kernel/debug/jbd/jbd-debug". diff --git a/fs/jbd/Makefile b/fs/jbd/Makefile deleted file mode 100644 index 54aca48..0000000 --- a/fs/jbd/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the linux journaling routines. -# - -obj-$(CONFIG_JBD) += jbd.o - -jbd-objs := transaction.o commit.o recovery.o checkpoint.o revoke.o journal.o diff --git a/fs/jbd/checkpoint.c b/fs/jbd/checkpoint.c deleted file mode 100644 index 08c0304..0000000 --- a/fs/jbd/checkpoint.c +++ /dev/null @@ -1,782 +0,0 @@ -/* - * linux/fs/jbd/checkpoint.c - * - * Written by Stephen C. Tweedie <sct@redhat.com>, 1999 - * - * Copyright 1999 Red Hat Software --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Checkpoint routines for the generic filesystem journaling code. - * Part of the ext2fs journaling system. - * - * Checkpointing is the process of ensuring that a section of the log is - * committed fully to disk, so that that portion of the log can be - * reused. - */ - -#include <linux/time.h> -#include <linux/fs.h> -#include <linux/jbd.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/blkdev.h> -#include <trace/events/jbd.h> - -/* - * Unlink a buffer from a transaction checkpoint list. - * - * Called with j_list_lock held. - */ -static inline void __buffer_unlink_first(struct journal_head *jh) -{ - transaction_t *transaction = jh->b_cp_transaction; - - jh->b_cpnext->b_cpprev = jh->b_cpprev; - jh->b_cpprev->b_cpnext = jh->b_cpnext; - if (transaction->t_checkpoint_list == jh) { - transaction->t_checkpoint_list = jh->b_cpnext; - if (transaction->t_checkpoint_list == jh) - transaction->t_checkpoint_list = NULL; - } -} - -/* - * Unlink a buffer from a transaction checkpoint(io) list. - * - * Called with j_list_lock held. - */ -static inline void __buffer_unlink(struct journal_head *jh) -{ - transaction_t *transaction = jh->b_cp_transaction; - - __buffer_unlink_first(jh); - if (transaction->t_checkpoint_io_list == jh) { - transaction->t_checkpoint_io_list = jh->b_cpnext; - if (transaction->t_checkpoint_io_list == jh) - transaction->t_checkpoint_io_list = NULL; - } -} - -/* - * Move a buffer from the checkpoint list to the checkpoint io list - * - * Called with j_list_lock held - */ -static inline void __buffer_relink_io(struct journal_head *jh) -{ - transaction_t *transaction = jh->b_cp_transaction; - - __buffer_unlink_first(jh); - - if (!transaction->t_checkpoint_io_list) { - jh->b_cpnext = jh->b_cpprev = jh; - } else { - jh->b_cpnext = transaction->t_checkpoint_io_list; - jh->b_cpprev = transaction->t_checkpoint_io_list->b_cpprev; - jh->b_cpprev->b_cpnext = jh; - jh->b_cpnext->b_cpprev = jh; - } - transaction->t_checkpoint_io_list = jh; -} - -/* - * Try to release a checkpointed buffer from its transaction. - * Returns 1 if we released it and 2 if we also released the - * whole transaction. - * - * Requires j_list_lock - * Called under jbd_lock_bh_state(jh2bh(jh)), and drops it - */ -static int __try_to_free_cp_buf(struct journal_head *jh) -{ - int ret = 0; - struct buffer_head *bh = jh2bh(jh); - - if (jh->b_jlist == BJ_None && !buffer_locked(bh) && - !buffer_dirty(bh) && !buffer_write_io_error(bh)) { - /* - * Get our reference so that bh cannot be freed before - * we unlock it - */ - get_bh(bh); - JBUFFER_TRACE(jh, "remove from checkpoint list"); - ret = __journal_remove_checkpoint(jh) + 1; - jbd_unlock_bh_state(bh); - BUFFER_TRACE(bh, "release"); - __brelse(bh); - } else { - jbd_unlock_bh_state(bh); - } - return ret; -} - -/* - * __log_wait_for_space: wait until there is space in the journal. - * - * Called under j-state_lock *only*. It will be unlocked if we have to wait - * for a checkpoint to free up some space in the log. - */ -void __log_wait_for_space(journal_t *journal) -{ - int nblocks, space_left; - assert_spin_locked(&journal->j_state_lock); - - nblocks = jbd_space_needed(journal); - while (__log_space_left(journal) < nblocks) { - if (journal->j_flags & JFS_ABORT) - return; - spin_unlock(&journal->j_state_lock); - mutex_lock(&journal->j_checkpoint_mutex); - - /* - * Test again, another process may have checkpointed while we - * were waiting for the checkpoint lock. If there are no - * transactions ready to be checkpointed, try to recover - * journal space by calling cleanup_journal_tail(), and if - * that doesn't work, by waiting for the currently committing - * transaction to complete. If there is absolutely no way - * to make progress, this is either a BUG or corrupted - * filesystem, so abort the journal and leave a stack - * trace for forensic evidence. - */ - spin_lock(&journal->j_state_lock); - spin_lock(&journal->j_list_lock); - nblocks = jbd_space_needed(journal); - space_left = __log_space_left(journal); - if (space_left < nblocks) { - int chkpt = journal->j_checkpoint_transactions != NULL; - tid_t tid = 0; - - if (journal->j_committing_transaction) - tid = journal->j_committing_transaction->t_tid; - spin_unlock(&journal->j_list_lock); - spin_unlock(&journal->j_state_lock); - if (chkpt) { - log_do_checkpoint(journal); - } else if (cleanup_journal_tail(journal) == 0) { - /* We were able to recover space; yay! */ - ; - } else if (tid) { - log_wait_commit(journal, tid); - } else { - printk(KERN_ERR "%s: needed %d blocks and " - "only had %d space available\n", - __func__, nblocks, space_left); - printk(KERN_ERR "%s: no way to get more " - "journal space\n", __func__); - WARN_ON(1); - journal_abort(journal, 0); - } - spin_lock(&journal->j_state_lock); - } else { - spin_unlock(&journal->j_list_lock); - } - mutex_unlock(&journal->j_checkpoint_mutex); - } -} - -/* - * We were unable to perform jbd_trylock_bh_state() inside j_list_lock. - * The caller must restart a list walk. Wait for someone else to run - * jbd_unlock_bh_state(). - */ -static void jbd_sync_bh(journal_t *journal, struct buffer_head *bh) - __releases(journal->j_list_lock) -{ - get_bh(bh); - spin_unlock(&journal->j_list_lock); - jbd_lock_bh_state(bh); - jbd_unlock_bh_state(bh); - put_bh(bh); -} - -/* - * Clean up transaction's list of buffers submitted for io. - * We wait for any pending IO to complete and remove any clean - * buffers. Note that we take the buffers in the opposite ordering - * from the one in which they were submitted for IO. - * - * Return 0 on success, and return <0 if some buffers have failed - * to be written out. - * - * Called with j_list_lock held. - */ -static int __wait_cp_io(journal_t *journal, transaction_t *transaction) -{ - struct journal_head *jh; - struct buffer_head *bh; - tid_t this_tid; - int released = 0; - int ret = 0; - - this_tid = transaction->t_tid; -restart: - /* Did somebody clean up the transaction in the meanwhile? */ - if (journal->j_checkpoint_transactions != transaction || - transaction->t_tid != this_tid) - return ret; - while (!released && transaction->t_checkpoint_io_list) { - jh = transaction->t_checkpoint_io_list; - bh = jh2bh(jh); - if (!jbd_trylock_bh_state(bh)) { - jbd_sync_bh(journal, bh); - spin_lock(&journal->j_list_lock); - goto restart; - } - get_bh(bh); - if (buffer_locked(bh)) { - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - wait_on_buffer(bh); - /* the journal_head may have gone by now */ - BUFFER_TRACE(bh, "brelse"); - __brelse(bh); - spin_lock(&journal->j_list_lock); - goto restart; - } - if (unlikely(buffer_write_io_error(bh))) - ret = -EIO; - - /* - * Now in whatever state the buffer currently is, we know that - * it has been written out and so we can drop it from the list - */ - released = __journal_remove_checkpoint(jh); - jbd_unlock_bh_state(bh); - __brelse(bh); - } - - return ret; -} - -#define NR_BATCH 64 - -static void -__flush_batch(journal_t *journal, struct buffer_head **bhs, int *batch_count) -{ - int i; - struct blk_plug plug; - - blk_start_plug(&plug); - for (i = 0; i < *batch_count; i++) - write_dirty_buffer(bhs[i], WRITE_SYNC); - blk_finish_plug(&plug); - - for (i = 0; i < *batch_count; i++) { - struct buffer_head *bh = bhs[i]; - clear_buffer_jwrite(bh); - BUFFER_TRACE(bh, "brelse"); - __brelse(bh); - } - *batch_count = 0; -} - -/* - * Try to flush one buffer from the checkpoint list to disk. - * - * Return 1 if something happened which requires us to abort the current - * scan of the checkpoint list. Return <0 if the buffer has failed to - * be written out. - * - * Called with j_list_lock held and drops it if 1 is returned - * Called under jbd_lock_bh_state(jh2bh(jh)), and drops it - */ -static int __process_buffer(journal_t *journal, struct journal_head *jh, - struct buffer_head **bhs, int *batch_count) -{ - struct buffer_head *bh = jh2bh(jh); - int ret = 0; - - if (buffer_locked(bh)) { - get_bh(bh); - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - wait_on_buffer(bh); - /* the journal_head may have gone by now */ - BUFFER_TRACE(bh, "brelse"); - __brelse(bh); - ret = 1; - } else if (jh->b_transaction != NULL) { - transaction_t *t = jh->b_transaction; - tid_t tid = t->t_tid; - - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - log_start_commit(journal, tid); - log_wait_commit(journal, tid); - ret = 1; - } else if (!buffer_dirty(bh)) { - ret = 1; - if (unlikely(buffer_write_io_error(bh))) - ret = -EIO; - get_bh(bh); - J_ASSERT_JH(jh, !buffer_jbddirty(bh)); - BUFFER_TRACE(bh, "remove from checkpoint"); - __journal_remove_checkpoint(jh); - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - __brelse(bh); - } else { - /* - * Important: we are about to write the buffer, and - * possibly block, while still holding the journal lock. - * We cannot afford to let the transaction logic start - * messing around with this buffer before we write it to - * disk, as that would break recoverability. - */ - BUFFER_TRACE(bh, "queue"); - get_bh(bh); - J_ASSERT_BH(bh, !buffer_jwrite(bh)); - set_buffer_jwrite(bh); - bhs[*batch_count] = bh; - __buffer_relink_io(jh); - jbd_unlock_bh_state(bh); - (*batch_count)++; - if (*batch_count == NR_BATCH) { - spin_unlock(&journal->j_list_lock); - __flush_batch(journal, bhs, batch_count); - ret = 1; - } - } - return ret; -} - -/* - * Perform an actual checkpoint. We take the first transaction on the - * list of transactions to be checkpointed and send all its buffers - * to disk. We submit larger chunks of data at once. - * - * The journal should be locked before calling this function. - * Called with j_checkpoint_mutex held. - */ -int log_do_checkpoint(journal_t *journal) -{ - transaction_t *transaction; - tid_t this_tid; - int result; - - jbd_debug(1, "Start checkpoint\n"); - - /* - * First thing: if there are any transactions in the log which - * don't need checkpointing, just eliminate them from the - * journal straight away. - */ - result = cleanup_journal_tail(journal); - trace_jbd_checkpoint(journal, result); - jbd_debug(1, "cleanup_journal_tail returned %d\n", result); - if (result <= 0) - return result; - - /* - * OK, we need to start writing disk blocks. Take one transaction - * and write it. - */ - result = 0; - spin_lock(&journal->j_list_lock); - if (!journal->j_checkpoint_transactions) - goto out; - transaction = journal->j_checkpoint_transactions; - this_tid = transaction->t_tid; -restart: - /* - * If someone cleaned up this transaction while we slept, we're - * done (maybe it's a new transaction, but it fell at the same - * address). - */ - if (journal->j_checkpoint_transactions == transaction && - transaction->t_tid == this_tid) { - int batch_count = 0; - struct buffer_head *bhs[NR_BATCH]; - struct journal_head *jh; - int retry = 0, err; - - while (!retry && transaction->t_checkpoint_list) { - struct buffer_head *bh; - - jh = transaction->t_checkpoint_list; - bh = jh2bh(jh); - if (!jbd_trylock_bh_state(bh)) { - jbd_sync_bh(journal, bh); - retry = 1; - break; - } - retry = __process_buffer(journal, jh, bhs,&batch_count); - if (retry < 0 && !result) - result = retry; - if (!retry && (need_resched() || - spin_needbreak(&journal->j_list_lock))) { - spin_unlock(&journal->j_list_lock); - retry = 1; - break; - } - } - - if (batch_count) { - if (!retry) { - spin_unlock(&journal->j_list_lock); - retry = 1; - } - __flush_batch(journal, bhs, &batch_count); - } - - if (retry) { - spin_lock(&journal->j_list_lock); - goto restart; - } - /* - * Now we have cleaned up the first transaction's checkpoint - * list. Let's clean up the second one - */ - err = __wait_cp_io(journal, transaction); - if (!result) - result = err; - } -out: - spin_unlock(&journal->j_list_lock); - if (result < 0) - journal_abort(journal, result); - else - result = cleanup_journal_tail(journal); - - return (result < 0) ? result : 0; -} - -/* - * Check the list of checkpoint transactions for the journal to see if - * we have already got rid of any since the last update of the log tail - * in the journal superblock. If so, we can instantly roll the - * superblock forward to remove those transactions from the log. - * - * Return <0 on error, 0 on success, 1 if there was nothing to clean up. - * - * This is the only part of the journaling code which really needs to be - * aware of transaction aborts. Checkpointing involves writing to the - * main filesystem area rather than to the journal, so it can proceed - * even in abort state, but we must not update the super block if - * checkpointing may have failed. Otherwise, we would lose some metadata - * buffers which should be written-back to the filesystem. - */ - -int cleanup_journal_tail(journal_t *journal) -{ - transaction_t * transaction; - tid_t first_tid; - unsigned int blocknr, freed; - - if (is_journal_aborted(journal)) - return 1; - - /* - * OK, work out the oldest transaction remaining in the log, and - * the log block it starts at. - * - * If the log is now empty, we need to work out which is the - * next transaction ID we will write, and where it will - * start. - */ - spin_lock(&journal->j_state_lock); - spin_lock(&journal->j_list_lock); - transaction = journal->j_checkpoint_transactions; - if (transaction) { - first_tid = transaction->t_tid; - blocknr = transaction->t_log_start; - } else if ((transaction = journal->j_committing_transaction) != NULL) { - first_tid = transaction->t_tid; - blocknr = transaction->t_log_start; - } else if ((transaction = journal->j_running_transaction) != NULL) { - first_tid = transaction->t_tid; - blocknr = journal->j_head; - } else { - first_tid = journal->j_transaction_sequence; - blocknr = journal->j_head; - } - spin_unlock(&journal->j_list_lock); - J_ASSERT(blocknr != 0); - - /* If the oldest pinned transaction is at the tail of the log - already then there's not much we can do right now. */ - if (journal->j_tail_sequence == first_tid) { - spin_unlock(&journal->j_state_lock); - return 1; - } - spin_unlock(&journal->j_state_lock); - - /* - * We need to make sure that any blocks that were recently written out - * --- perhaps by log_do_checkpoint() --- are flushed out before we - * drop the transactions from the journal. Similarly we need to be sure - * superblock makes it to disk before next transaction starts reusing - * freed space (otherwise we could replay some blocks of the new - * transaction thinking they belong to the old one). So we use - * WRITE_FLUSH_FUA. It's unlikely this will be necessary, especially - * with an appropriately sized journal, but we need this to guarantee - * correctness. Fortunately cleanup_journal_tail() doesn't get called - * all that often. - */ - journal_update_sb_log_tail(journal, first_tid, blocknr, - WRITE_FLUSH_FUA); - - spin_lock(&journal->j_state_lock); - /* OK, update the superblock to recover the freed space. - * Physical blocks come first: have we wrapped beyond the end of - * the log? */ - freed = blocknr - journal->j_tail; - if (blocknr < journal->j_tail) - freed = freed + journal->j_last - journal->j_first; - - trace_jbd_cleanup_journal_tail(journal, first_tid, blocknr, freed); - jbd_debug(1, - "Cleaning journal tail from %d to %d (offset %u), " - "freeing %u\n", - journal->j_tail_sequence, first_tid, blocknr, freed); - - journal->j_free += freed; - journal->j_tail_sequence = first_tid; - journal->j_tail = blocknr; - spin_unlock(&journal->j_state_lock); - return 0; -} - - -/* Checkpoint list management */ - -/* - * journal_clean_one_cp_list - * - * Find all the written-back checkpoint buffers in the given list and release - * them. - * - * Called with j_list_lock held. - * Returns number of buffers reaped (for debug) - */ - -static int journal_clean_one_cp_list(struct journal_head *jh, int *released) -{ - struct journal_head *last_jh; - struct journal_head *next_jh = jh; - int ret, freed = 0; - - *released = 0; - if (!jh) - return 0; - - last_jh = jh->b_cpprev; - do { - jh = next_jh; - next_jh = jh->b_cpnext; - /* Use trylock because of the ranking */ - if (jbd_trylock_bh_state(jh2bh(jh))) { - ret = __try_to_free_cp_buf(jh); - if (ret) { - freed++; - if (ret == 2) { - *released = 1; - return freed; - } - } - } - /* - * This function only frees up some memory - * if possible so we dont have an obligation - * to finish processing. Bail out if preemption - * requested: - */ - if (need_resched()) - return freed; - } while (jh != last_jh); - - return freed; -} - -/* - * journal_clean_checkpoint_list - * - * Find all the written-back checkpoint buffers in the journal and release them. - * - * Called with the journal locked. - * Called with j_list_lock held. - * Returns number of buffers reaped (for debug) - */ - -int __journal_clean_checkpoint_list(journal_t *journal) -{ - transaction_t *transaction, *last_transaction, *next_transaction; - int ret = 0; - int released; - - transaction = journal->j_checkpoint_transactions; - if (!transaction) - goto out; - - last_transaction = transaction->t_cpprev; - next_transaction = transaction; - do { - transaction = next_transaction; - next_transaction = transaction->t_cpnext; - ret += journal_clean_one_cp_list(transaction-> - t_checkpoint_list, &released); - /* - * This function only frees up some memory if possible so we - * dont have an obligation to finish processing. Bail out if - * preemption requested: - */ - if (need_resched()) - goto out; - if (released) - continue; - /* - * It is essential that we are as careful as in the case of - * t_checkpoint_list with removing the buffer from the list as - * we can possibly see not yet submitted buffers on io_list - */ - ret += journal_clean_one_cp_list(transaction-> - t_checkpoint_io_list, &released); - if (need_resched()) - goto out; - } while (transaction != last_transaction); -out: - return ret; -} - -/* - * journal_remove_checkpoint: called after a buffer has been committed - * to disk (either by being write-back flushed to disk, or being - * committed to the log). - * - * We cannot safely clean a transaction out of the log until all of the - * buffer updates committed in that transaction have safely been stored - * elsewhere on disk. To achieve this, all of the buffers in a - * transaction need to be maintained on the transaction's checkpoint - * lists until they have been rewritten, at which point this function is - * called to remove the buffer from the existing transaction's - * checkpoint lists. - * - * The function returns 1 if it frees the transaction, 0 otherwise. - * The function can free jh and bh. - * - * This function is called with j_list_lock held. - * This function is called with jbd_lock_bh_state(jh2bh(jh)) - */ - -int __journal_remove_checkpoint(struct journal_head *jh) -{ - transaction_t *transaction; - journal_t *journal; - int ret = 0; - - JBUFFER_TRACE(jh, "entry"); - - if ((transaction = jh->b_cp_transaction) == NULL) { - JBUFFER_TRACE(jh, "not on transaction"); - goto out; - } - journal = transaction->t_journal; - - JBUFFER_TRACE(jh, "removing from transaction"); - __buffer_unlink(jh); - jh->b_cp_transaction = NULL; - journal_put_journal_head(jh); - - if (transaction->t_checkpoint_list != NULL || - transaction->t_checkpoint_io_list != NULL) - goto out; - - /* - * There is one special case to worry about: if we have just pulled the - * buffer off a running or committing transaction's checkpoing list, - * then even if the checkpoint list is empty, the transaction obviously - * cannot be dropped! - * - * The locking here around t_state is a bit sleazy. - * See the comment at the end of journal_commit_transaction(). - */ - if (transaction->t_state != T_FINISHED) - goto out; - - /* OK, that was the last buffer for the transaction: we can now - safely remove this transaction from the log */ - - __journal_drop_transaction(journal, transaction); - - /* Just in case anybody was waiting for more transactions to be - checkpointed... */ - wake_up(&journal->j_wait_logspace); - ret = 1; -out: - return ret; -} - -/* - * journal_insert_checkpoint: put a committed buffer onto a checkpoint - * list so that we know when it is safe to clean the transaction out of - * the log. - * - * Called with the journal locked. - * Called with j_list_lock held. - */ -void __journal_insert_checkpoint(struct journal_head *jh, - transaction_t *transaction) -{ - JBUFFER_TRACE(jh, "entry"); - J_ASSERT_JH(jh, buffer_dirty(jh2bh(jh)) || buffer_jbddirty(jh2bh(jh))); - J_ASSERT_JH(jh, jh->b_cp_transaction == NULL); - - /* Get reference for checkpointing transaction */ - journal_grab_journal_head(jh2bh(jh)); - jh->b_cp_transaction = transaction; - - if (!transaction->t_checkpoint_list) { - jh->b_cpnext = jh->b_cpprev = jh; - } else { - jh->b_cpnext = transaction->t_checkpoint_list; - jh->b_cpprev = transaction->t_checkpoint_list->b_cpprev; - jh->b_cpprev->b_cpnext = jh; - jh->b_cpnext->b_cpprev = jh; - } - transaction->t_checkpoint_list = jh; -} - -/* - * We've finished with this transaction structure: adios... - * - * The transaction must have no links except for the checkpoint by this - * point. - * - * Called with the journal locked. - * Called with j_list_lock held. - */ - -void __journal_drop_transaction(journal_t *journal, transaction_t *transaction) -{ - assert_spin_locked(&journal->j_list_lock); - if (transaction->t_cpnext) { - transaction->t_cpnext->t_cpprev = transaction->t_cpprev; - transaction->t_cpprev->t_cpnext = transaction->t_cpnext; - if (journal->j_checkpoint_transactions == transaction) - journal->j_checkpoint_transactions = - transaction->t_cpnext; - if (journal->j_checkpoint_transactions == transaction) - journal->j_checkpoint_transactions = NULL; - } - - J_ASSERT(transaction->t_state == T_FINISHED); - J_ASSERT(transaction->t_buffers == NULL); - J_ASSERT(transaction->t_sync_datalist == NULL); - J_ASSERT(transaction->t_forget == NULL); - J_ASSERT(transaction->t_iobuf_list == NULL); - J_ASSERT(transaction->t_shadow_list == NULL); - J_ASSERT(transaction->t_log_list == NULL); - J_ASSERT(transaction->t_checkpoint_list == NULL); - J_ASSERT(transaction->t_checkpoint_io_list == NULL); - J_ASSERT(transaction->t_updates == 0); - J_ASSERT(journal->j_committing_transaction != transaction); - J_ASSERT(journal->j_running_transaction != transaction); - - trace_jbd_drop_transaction(journal, transaction); - jbd_debug(1, "Dropping transaction %d, all done\n", transaction->t_tid); - kfree(transaction); -} diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c deleted file mode 100644 index bb217dc..0000000 --- a/fs/jbd/commit.c +++ /dev/null @@ -1,1021 +0,0 @@ -/* - * linux/fs/jbd/commit.c - * - * Written by Stephen C. Tweedie <sct@redhat.com>, 1998 - * - * Copyright 1998 Red Hat corp --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Journal commit routines for the generic filesystem journaling code; - * part of the ext2fs journaling system. - */ - -#include <linux/time.h> -#include <linux/fs.h> -#include <linux/jbd.h> -#include <linux/errno.h> -#include <linux/mm.h> -#include <linux/pagemap.h> -#include <linux/bio.h> -#include <linux/blkdev.h> -#include <trace/events/jbd.h> - -/* - * Default IO end handler for temporary BJ_IO buffer_heads. - */ -static void journal_end_buffer_io_sync(struct buffer_head *bh, int uptodate) -{ - BUFFER_TRACE(bh, ""); - if (uptodate) - set_buffer_uptodate(bh); - else - clear_buffer_uptodate(bh); - unlock_buffer(bh); -} - -/* - * When an ext3-ordered file is truncated, it is possible that many pages are - * not successfully freed, because they are attached to a committing transaction. - * After the transaction commits, these pages are left on the LRU, with no - * ->mapping, and with attached buffers. These pages are trivially reclaimable - * by the VM, but their apparent absence upsets the VM accounting, and it makes - * the numbers in /proc/meminfo look odd. - * - * So here, we have a buffer which has just come off the forget list. Look to - * see if we can strip all buffers from the backing page. - * - * Called under journal->j_list_lock. The caller provided us with a ref - * against the buffer, and we drop that here. - */ -static void release_buffer_page(struct buffer_head *bh) -{ - struct page *page; - - if (buffer_dirty(bh)) - goto nope; - if (atomic_read(&bh->b_count) != 1) - goto nope; - page = bh->b_page; - if (!page) - goto nope; - if (page->mapping) - goto nope; - - /* OK, it's a truncated page */ - if (!trylock_page(page)) - goto nope; - - page_cache_get(page); - __brelse(bh); - try_to_free_buffers(page); - unlock_page(page); - page_cache_release(page); - return; - -nope: - __brelse(bh); -} - -/* - * Decrement reference counter for data buffer. If it has been marked - * 'BH_Freed', release it and the page to which it belongs if possible. - */ -static void release_data_buffer(struct buffer_head *bh) -{ - if (buffer_freed(bh)) { - WARN_ON_ONCE(buffer_dirty(bh)); - clear_buffer_freed(bh); - clear_buffer_mapped(bh); - clear_buffer_new(bh); - clear_buffer_req(bh); - bh->b_bdev = NULL; - release_buffer_page(bh); - } else - put_bh(bh); -} - -/* - * Try to acquire jbd_lock_bh_state() against the buffer, when j_list_lock is - * held. For ranking reasons we must trylock. If we lose, schedule away and - * return 0. j_list_lock is dropped in this case. - */ -static int inverted_lock(journal_t *journal, struct buffer_head *bh) -{ - if (!jbd_trylock_bh_state(bh)) { - spin_unlock(&journal->j_list_lock); - schedule(); - return 0; - } - return 1; -} - -/* Done it all: now write the commit record. We should have - * cleaned up our previous buffers by now, so if we are in abort - * mode we can now just skip the rest of the journal write - * entirely. - * - * Returns 1 if the journal needs to be aborted or 0 on success - */ -static int journal_write_commit_record(journal_t *journal, - transaction_t *commit_transaction) -{ - struct journal_head *descriptor; - struct buffer_head *bh; - journal_header_t *header; - int ret; - - if (is_journal_aborted(journal)) - return 0; - - descriptor = journal_get_descriptor_buffer(journal); - if (!descriptor) - return 1; - - bh = jh2bh(descriptor); - - header = (journal_header_t *)(bh->b_data); - header->h_magic = cpu_to_be32(JFS_MAGIC_NUMBER); - header->h_blocktype = cpu_to_be32(JFS_COMMIT_BLOCK); - header->h_sequence = cpu_to_be32(commit_transaction->t_tid); - - JBUFFER_TRACE(descriptor, "write commit block"); - set_buffer_dirty(bh); - - if (journal->j_flags & JFS_BARRIER) - ret = __sync_dirty_buffer(bh, WRITE_SYNC | WRITE_FLUSH_FUA); - else - ret = sync_dirty_buffer(bh); - - put_bh(bh); /* One for getblk() */ - journal_put_journal_head(descriptor); - - return (ret == -EIO); -} - -static void journal_do_submit_data(struct buffer_head **wbuf, int bufs, - int write_op) -{ - int i; - - for (i = 0; i < bufs; i++) { - wbuf[i]->b_end_io = end_buffer_write_sync; - /* - * Here we write back pagecache data that may be mmaped. Since - * we cannot afford to clean the page and set PageWriteback - * here due to lock ordering (page lock ranks above transaction - * start), the data can change while IO is in flight. Tell the - * block layer it should bounce the bio pages if stable data - * during write is required. - * - * We use up our safety reference in submit_bh(). - */ - _submit_bh(write_op, wbuf[i], 1 << BIO_SNAP_STABLE); - } -} - -/* - * Submit all the data buffers to disk - */ -static int journal_submit_data_buffers(journal_t *journal, - transaction_t *commit_transaction, - int write_op) -{ - struct journal_head *jh; - struct buffer_head *bh; - int locked; - int bufs = 0; - struct buffer_head **wbuf = journal->j_wbuf; - int err = 0; - - /* - * Whenever we unlock the journal and sleep, things can get added - * onto ->t_sync_datalist, so we have to keep looping back to - * write_out_data until we *know* that the list is empty. - * - * Cleanup any flushed data buffers from the data list. Even in - * abort mode, we want to flush this out as soon as possible. - */ -write_out_data: - cond_resched(); - spin_lock(&journal->j_list_lock); - - while (commit_transaction->t_sync_datalist) { - jh = commit_transaction->t_sync_datalist; - bh = jh2bh(jh); - locked = 0; - - /* Get reference just to make sure buffer does not disappear - * when we are forced to drop various locks */ - get_bh(bh); - /* If the buffer is dirty, we need to submit IO and hence - * we need the buffer lock. We try to lock the buffer without - * blocking. If we fail, we need to drop j_list_lock and do - * blocking lock_buffer(). - */ - if (buffer_dirty(bh)) { - if (!trylock_buffer(bh)) { - BUFFER_TRACE(bh, "needs blocking lock"); - spin_unlock(&journal->j_list_lock); - trace_jbd_do_submit_data(journal, - commit_transaction); - /* Write out all data to prevent deadlocks */ - journal_do_submit_data(wbuf, bufs, write_op); - bufs = 0; - lock_buffer(bh); - spin_lock(&journal->j_list_lock); - } - locked = 1; - } - /* We have to get bh_state lock. Again out of order, sigh. */ - if (!inverted_lock(journal, bh)) { - jbd_lock_bh_state(bh); - spin_lock(&journal->j_list_lock); - } - /* Someone already cleaned up the buffer? */ - if (!buffer_jbd(bh) || bh2jh(bh) != jh - || jh->b_transaction != commit_transaction - || jh->b_jlist != BJ_SyncData) { - jbd_unlock_bh_state(bh); - if (locked) - unlock_buffer(bh); - BUFFER_TRACE(bh, "already cleaned up"); - release_data_buffer(bh); - continue; - } - if (locked && test_clear_buffer_dirty(bh)) { - BUFFER_TRACE(bh, "needs writeout, adding to array"); - wbuf[bufs++] = bh; - __journal_file_buffer(jh, commit_transaction, - BJ_Locked); - jbd_unlock_bh_state(bh); - if (bufs == journal->j_wbufsize) { - spin_unlock(&journal->j_list_lock); - trace_jbd_do_submit_data(journal, - commit_transaction); - journal_do_submit_data(wbuf, bufs, write_op); - bufs = 0; - goto write_out_data; - } - } else if (!locked && buffer_locked(bh)) { - __journal_file_buffer(jh, commit_transaction, - BJ_Locked); - jbd_unlock_bh_state(bh); - put_bh(bh); - } else { - BUFFER_TRACE(bh, "writeout complete: unfile"); - if (unlikely(!buffer_uptodate(bh))) - err = -EIO; - __journal_unfile_buffer(jh); - jbd_unlock_bh_state(bh); - if (locked) - unlock_buffer(bh); - release_data_buffer(bh); - } - - if (need_resched() || spin_needbreak(&journal->j_list_lock)) { - spin_unlock(&journal->j_list_lock); - goto write_out_data; - } - } - spin_unlock(&journal->j_list_lock); - trace_jbd_do_submit_data(journal, commit_transaction); - journal_do_submit_data(wbuf, bufs, write_op); - - return err; -} - -/* - * journal_commit_transaction - * - * The primary function for committing a transaction to the log. This - * function is called by the journal thread to begin a complete commit. - */ -void journal_commit_transaction(journal_t *journal) -{ - transaction_t *commit_transaction; - struct journal_head *jh, *new_jh, *descriptor; - struct buffer_head **wbuf = journal->j_wbuf; - int bufs; - int flags; - int err; - unsigned int blocknr; - ktime_t start_time; - u64 commit_time; - char *tagp = NULL; - journal_header_t *header; - journal_block_tag_t *tag = NULL; - int space_left = 0; - int first_tag = 0; - int tag_flag; - int i; - struct blk_plug plug; - int write_op = WRITE; - - /* - * First job: lock down the current transaction and wait for - * all outstanding updates to complete. - */ - - /* Do we need to erase the effects of a prior journal_flush? */ - if (journal->j_flags & JFS_FLUSHED) { - jbd_debug(3, "super block updated\n"); - mutex_lock(&journal->j_checkpoint_mutex); - /* - * We hold j_checkpoint_mutex so tail cannot change under us. - * We don't need any special data guarantees for writing sb - * since journal is empty and it is ok for write to be - * flushed only with transaction commit. - */ - journal_update_sb_log_tail(journal, journal->j_tail_sequence, - journal->j_tail, WRITE_SYNC); - mutex_unlock(&journal->j_checkpoint_mutex); - } else { - jbd_debug(3, "superblock not updated\n"); - } - - J_ASSERT(journal->j_running_transaction != NULL); - J_ASSERT(journal->j_committing_transaction == NULL); - - commit_transaction = journal->j_running_transaction; - - trace_jbd_start_commit(journal, commit_transaction); - jbd_debug(1, "JBD: starting commit of transaction %d\n", - commit_transaction->t_tid); - - spin_lock(&journal->j_state_lock); - J_ASSERT(commit_transaction->t_state == T_RUNNING); - commit_transaction->t_state = T_LOCKED; - - trace_jbd_commit_locking(journal, commit_transaction); - spin_lock(&commit_transaction->t_handle_lock); - while (commit_transaction->t_updates) { - DEFINE_WAIT(wait); - - prepare_to_wait(&journal->j_wait_updates, &wait, - TASK_UNINTERRUPTIBLE); - if (commit_transaction->t_updates) { - spin_unlock(&commit_transaction->t_handle_lock); - spin_unlock(&journal->j_state_lock); - schedule(); - spin_lock(&journal->j_state_lock); - spin_lock(&commit_transaction->t_handle_lock); - } - finish_wait(&journal->j_wait_updates, &wait); - } - spin_unlock(&commit_transaction->t_handle_lock); - - J_ASSERT (commit_transaction->t_outstanding_credits <= - journal->j_max_transaction_buffers); - - /* - * First thing we are allowed to do is to discard any remaining - * BJ_Reserved buffers. Note, it is _not_ permissible to assume - * that there are no such buffers: if a large filesystem - * operation like a truncate needs to split itself over multiple - * transactions, then it may try to do a journal_restart() while - * there are still BJ_Reserved buffers outstanding. These must - * be released cleanly from the current transaction. - * - * In this case, the filesystem must still reserve write access - * again before modifying the buffer in the new transaction, but - * we do not require it to remember exactly which old buffers it - * has reserved. This is consistent with the existing behaviour - * that multiple journal_get_write_access() calls to the same - * buffer are perfectly permissible. - */ - while (commit_transaction->t_reserved_list) { - jh = commit_transaction->t_reserved_list; - JBUFFER_TRACE(jh, "reserved, unused: refile"); - /* - * A journal_get_undo_access()+journal_release_buffer() may - * leave undo-committed data. - */ - if (jh->b_committed_data) { - struct buffer_head *bh = jh2bh(jh); - - jbd_lock_bh_state(bh); - jbd_free(jh->b_committed_data, bh->b_size); - jh->b_committed_data = NULL; - jbd_unlock_bh_state(bh); - } - journal_refile_buffer(journal, jh); - } - - /* - * Now try to drop any written-back buffers from the journal's - * checkpoint lists. We do this *before* commit because it potentially - * frees some memory - */ - spin_lock(&journal->j_list_lock); - __journal_clean_checkpoint_list(journal); - spin_unlock(&journal->j_list_lock); - - jbd_debug (3, "JBD: commit phase 1\n"); - - /* - * Clear revoked flag to reflect there is no revoked buffers - * in the next transaction which is going to be started. - */ - journal_clear_buffer_revoked_flags(journal); - - /* - * Switch to a new revoke table. - */ - journal_switch_revoke_table(journal); - - trace_jbd_commit_flushing(journal, commit_transaction); - commit_transaction->t_state = T_FLUSH; - journal->j_committing_transaction = commit_transaction; - journal->j_running_transaction = NULL; - start_time = ktime_get(); - commit_transaction->t_log_start = journal->j_head; - wake_up(&journal->j_wait_transaction_locked); - spin_unlock(&journal->j_state_lock); - - jbd_debug (3, "JBD: commit phase 2\n"); - - if (tid_geq(journal->j_commit_waited, commit_transaction->t_tid)) - write_op = WRITE_SYNC; - - /* - * Now start flushing things to disk, in the order they appear - * on the transaction lists. Data blocks go first. - */ - blk_start_plug(&plug); - err = journal_submit_data_buffers(journal, commit_transaction, - write_op); - blk_finish_plug(&plug); - - /* - * Wait for all previously submitted IO to complete. - */ - spin_lock(&journal->j_list_lock); - while (commit_transaction->t_locked_list) { - struct buffer_head *bh; - - jh = commit_transaction->t_locked_list->b_tprev; - bh = jh2bh(jh); - get_bh(bh); - if (buffer_locked(bh)) { - spin_unlock(&journal->j_list_lock); - wait_on_buffer(bh); - spin_lock(&journal->j_list_lock); - } - if (unlikely(!buffer_uptodate(bh))) { - if (!trylock_page(bh->b_page)) { - spin_unlock(&journal->j_list_lock); - lock_page(bh->b_page); - spin_lock(&journal->j_list_lock); - } - if (bh->b_page->mapping) - set_bit(AS_EIO, &bh->b_page->mapping->flags); - - unlock_page(bh->b_page); - SetPageError(bh->b_page); - err = -EIO; - } - if (!inverted_lock(journal, bh)) { - put_bh(bh); - spin_lock(&journal->j_list_lock); - continue; - } - if (buffer_jbd(bh) && bh2jh(bh) == jh && - jh->b_transaction == commit_transaction && - jh->b_jlist == BJ_Locked) - __journal_unfile_buffer(jh); - jbd_unlock_bh_state(bh); - release_data_buffer(bh); - cond_resched_lock(&journal->j_list_lock); - } - spin_unlock(&journal->j_list_lock); - - if (err) { - char b[BDEVNAME_SIZE]; - - printk(KERN_WARNING - "JBD: Detected IO errors while flushing file data " - "on %s\n", bdevname(journal->j_fs_dev, b)); - if (journal->j_flags & JFS_ABORT_ON_SYNCDATA_ERR) - journal_abort(journal, err); - err = 0; - } - - blk_start_plug(&plug); - - journal_write_revoke_records(journal, commit_transaction, write_op); - - /* - * If we found any dirty or locked buffers, then we should have - * looped back up to the write_out_data label. If there weren't - * any then journal_clean_data_list should have wiped the list - * clean by now, so check that it is in fact empty. - */ - J_ASSERT (commit_transaction->t_sync_datalist == NULL); - - jbd_debug (3, "JBD: commit phase 3\n"); - - /* - * Way to go: we have now written out all of the data for a - * transaction! Now comes the tricky part: we need to write out - * metadata. Loop over the transaction's entire buffer list: - */ - spin_lock(&journal->j_state_lock); - commit_transaction->t_state = T_COMMIT; - spin_unlock(&journal->j_state_lock); - - trace_jbd_commit_logging(journal, commit_transaction); - J_ASSERT(commit_transaction->t_nr_buffers <= - commit_transaction->t_outstanding_credits); - - descriptor = NULL; - bufs = 0; - while (commit_transaction->t_buffers) { - - /* Find the next buffer to be journaled... */ - - jh = commit_transaction->t_buffers; - - /* If we're in abort mode, we just un-journal the buffer and - release it. */ - - if (is_journal_aborted(journal)) { - clear_buffer_jbddirty(jh2bh(jh)); - JBUFFER_TRACE(jh, "journal is aborting: refile"); - journal_refile_buffer(journal, jh); - /* If that was the last one, we need to clean up - * any descriptor buffers which may have been - * already allocated, even if we are now - * aborting. */ - if (!commit_transaction->t_buffers) - goto start_journal_io; - continue; - } - - /* Make sure we have a descriptor block in which to - record the metadata buffer. */ - - if (!descriptor) { - struct buffer_head *bh; - - J_ASSERT (bufs == 0); - - jbd_debug(4, "JBD: get descriptor\n"); - - descriptor = journal_get_descriptor_buffer(journal); - if (!descriptor) { - journal_abort(journal, -EIO); - continue; - } - - bh = jh2bh(descriptor); - jbd_debug(4, "JBD: got buffer %llu (%p)\n", - (unsigned long long)bh->b_blocknr, bh->b_data); - header = (journal_header_t *)&bh->b_data[0]; - header->h_magic = cpu_to_be32(JFS_MAGIC_NUMBER); - header->h_blocktype = cpu_to_be32(JFS_DESCRIPTOR_BLOCK); - header->h_sequence = cpu_to_be32(commit_transaction->t_tid); - - tagp = &bh->b_data[sizeof(journal_header_t)]; - space_left = bh->b_size - sizeof(journal_header_t); - first_tag = 1; - set_buffer_jwrite(bh); - set_buffer_dirty(bh); - wbuf[bufs++] = bh; - - /* Record it so that we can wait for IO - completion later */ - BUFFER_TRACE(bh, "ph3: file as descriptor"); - journal_file_buffer(descriptor, commit_transaction, - BJ_LogCtl); - } - - /* Where is the buffer to be written? */ - - err = journal_next_log_block(journal, &blocknr); - /* If the block mapping failed, just abandon the buffer - and repeat this loop: we'll fall into the - refile-on-abort condition above. */ - if (err) { - journal_abort(journal, err); - continue; - } - - /* - * start_this_handle() uses t_outstanding_credits to determine - * the free space in the log, but this counter is changed - * by journal_next_log_block() also. - */ - commit_transaction->t_outstanding_credits--; - - /* Bump b_count to prevent truncate from stumbling over - the shadowed buffer! @@@ This can go if we ever get - rid of the BJ_IO/BJ_Shadow pairing of buffers. */ - get_bh(jh2bh(jh)); - - /* Make a temporary IO buffer with which to write it out - (this will requeue both the metadata buffer and the - temporary IO buffer). new_bh goes on BJ_IO*/ - - set_buffer_jwrite(jh2bh(jh)); - /* - * akpm: journal_write_metadata_buffer() sets - * new_bh->b_transaction to commit_transaction. - * We need to clean this up before we release new_bh - * (which is of type BJ_IO) - */ - JBUFFER_TRACE(jh, "ph3: write metadata"); - flags = journal_write_metadata_buffer(commit_transaction, - jh, &new_jh, blocknr); - set_buffer_jwrite(jh2bh(new_jh)); - wbuf[bufs++] = jh2bh(new_jh); - - /* Record the new block's tag in the current descriptor - buffer */ - - tag_flag = 0; - if (flags & 1) - tag_flag |= JFS_FLAG_ESCAPE; - if (!first_tag) - tag_flag |= JFS_FLAG_SAME_UUID; - - tag = (journal_block_tag_t *) tagp; - tag->t_blocknr = cpu_to_be32(jh2bh(jh)->b_blocknr); - tag->t_flags = cpu_to_be32(tag_flag); - tagp += sizeof(journal_block_tag_t); - space_left -= sizeof(journal_block_tag_t); - - if (first_tag) { - memcpy (tagp, journal->j_uuid, 16); - tagp += 16; - space_left -= 16; - first_tag = 0; - } - - /* If there's no more to do, or if the descriptor is full, - let the IO rip! */ - - if (bufs == journal->j_wbufsize || - commit_transaction->t_buffers == NULL || - space_left < sizeof(journal_block_tag_t) + 16) { - - jbd_debug(4, "JBD: Submit %d IOs\n", bufs); - - /* Write an end-of-descriptor marker before - submitting the IOs. "tag" still points to - the last tag we set up. */ - - tag->t_flags |= cpu_to_be32(JFS_FLAG_LAST_TAG); - -start_journal_io: - for (i = 0; i < bufs; i++) { - struct buffer_head *bh = wbuf[i]; - lock_buffer(bh); - clear_buffer_dirty(bh); - set_buffer_uptodate(bh); - bh->b_end_io = journal_end_buffer_io_sync; - /* - * In data=journal mode, here we can end up - * writing pagecache data that might be - * mmapped. Since we can't afford to clean the - * page and set PageWriteback (see the comment - * near the other use of _submit_bh()), the - * data can change while the write is in - * flight. Tell the block layer to bounce the - * bio pages if stable pages are required. - */ - _submit_bh(write_op, bh, 1 << BIO_SNAP_STABLE); - } - cond_resched(); - - /* Force a new descriptor to be generated next - time round the loop. */ - descriptor = NULL; - bufs = 0; - } - } - - blk_finish_plug(&plug); - - /* Lo and behold: we have just managed to send a transaction to - the log. Before we can commit it, wait for the IO so far to - complete. Control buffers being written are on the - transaction's t_log_list queue, and metadata buffers are on - the t_iobuf_list queue. - - Wait for the buffers in reverse order. That way we are - less likely to be woken up until all IOs have completed, and - so we incur less scheduling load. - */ - - jbd_debug(3, "JBD: commit phase 4\n"); - - /* - * akpm: these are BJ_IO, and j_list_lock is not needed. - * See __journal_try_to_free_buffer. - */ -wait_for_iobuf: - while (commit_transaction->t_iobuf_list != NULL) { - struct buffer_head *bh; - - jh = commit_transaction->t_iobuf_list->b_tprev; - bh = jh2bh(jh); - if (buffer_locked(bh)) { - wait_on_buffer(bh); - goto wait_for_iobuf; - } - if (cond_resched()) - goto wait_for_iobuf; - - if (unlikely(!buffer_uptodate(bh))) - err = -EIO; - - clear_buffer_jwrite(bh); - - JBUFFER_TRACE(jh, "ph4: unfile after journal write"); - journal_unfile_buffer(journal, jh); - - /* - * ->t_iobuf_list should contain only dummy buffer_heads - * which were created by journal_write_metadata_buffer(). - */ - BUFFER_TRACE(bh, "dumping temporary bh"); - journal_put_journal_head(jh); - __brelse(bh); - J_ASSERT_BH(bh, atomic_read(&bh->b_count) == 0); - free_buffer_head(bh); - - /* We also have to unlock and free the corresponding - shadowed buffer */ - jh = commit_transaction->t_shadow_list->b_tprev; - bh = jh2bh(jh); - clear_buffer_jwrite(bh); - J_ASSERT_BH(bh, buffer_jbddirty(bh)); - - /* The metadata is now released for reuse, but we need - to remember it against this transaction so that when - we finally commit, we can do any checkpointing - required. */ - JBUFFER_TRACE(jh, "file as BJ_Forget"); - journal_file_buffer(jh, commit_transaction, BJ_Forget); - /* - * Wake up any transactions which were waiting for this - * IO to complete. The barrier must be here so that changes - * by journal_file_buffer() take effect before wake_up_bit() - * does the waitqueue check. - */ - smp_mb(); - wake_up_bit(&bh->b_state, BH_Unshadow); - JBUFFER_TRACE(jh, "brelse shadowed buffer"); - __brelse(bh); - } - - J_ASSERT (commit_transaction->t_shadow_list == NULL); - - jbd_debug(3, "JBD: commit phase 5\n"); - - /* Here we wait for the revoke record and descriptor record buffers */ - wait_for_ctlbuf: - while (commit_transaction->t_log_list != NULL) { - struct buffer_head *bh; - - jh = commit_transaction->t_log_list->b_tprev; - bh = jh2bh(jh); - if (buffer_locked(bh)) { - wait_on_buffer(bh); - goto wait_for_ctlbuf; - } - if (cond_resched()) - goto wait_for_ctlbuf; - - if (unlikely(!buffer_uptodate(bh))) - err = -EIO; - - BUFFER_TRACE(bh, "ph5: control buffer writeout done: unfile"); - clear_buffer_jwrite(bh); - journal_unfile_buffer(journal, jh); - journal_put_journal_head(jh); - __brelse(bh); /* One for getblk */ - /* AKPM: bforget here */ - } - - if (err) - journal_abort(journal, err); - - jbd_debug(3, "JBD: commit phase 6\n"); - - /* All metadata is written, now write commit record and do cleanup */ - spin_lock(&journal->j_state_lock); - J_ASSERT(commit_transaction->t_state == T_COMMIT); - commit_transaction->t_state = T_COMMIT_RECORD; - spin_unlock(&journal->j_state_lock); - - if (journal_write_commit_record(journal, commit_transaction)) - err = -EIO; - - if (err) - journal_abort(journal, err); - - /* End of a transaction! Finally, we can do checkpoint - processing: any buffers committed as a result of this - transaction can be removed from any checkpoint list it was on - before. */ - - jbd_debug(3, "JBD: commit phase 7\n"); - - J_ASSERT(commit_transaction->t_sync_datalist == NULL); - J_ASSERT(commit_transaction->t_buffers == NULL); - J_ASSERT(commit_transaction->t_checkpoint_list == NULL); - J_ASSERT(commit_transaction->t_iobuf_list == NULL); - J_ASSERT(commit_transaction->t_shadow_list == NULL); - J_ASSERT(commit_transaction->t_log_list == NULL); - -restart_loop: - /* - * As there are other places (journal_unmap_buffer()) adding buffers - * to this list we have to be careful and hold the j_list_lock. - */ - spin_lock(&journal->j_list_lock); - while (commit_transaction->t_forget) { - transaction_t *cp_transaction; - struct buffer_head *bh; - int try_to_free = 0; - - jh = commit_transaction->t_forget; - spin_unlock(&journal->j_list_lock); - bh = jh2bh(jh); - /* - * Get a reference so that bh cannot be freed before we are - * done with it. - */ - get_bh(bh); - jbd_lock_bh_state(bh); - J_ASSERT_JH(jh, jh->b_transaction == commit_transaction || - jh->b_transaction == journal->j_running_transaction); - - /* - * If there is undo-protected committed data against - * this buffer, then we can remove it now. If it is a - * buffer needing such protection, the old frozen_data - * field now points to a committed version of the - * buffer, so rotate that field to the new committed - * data. - * - * Otherwise, we can just throw away the frozen data now. - */ - if (jh->b_committed_data) { - jbd_free(jh->b_committed_data, bh->b_size); - jh->b_committed_data = NULL; - if (jh->b_frozen_data) { - jh->b_committed_data = jh->b_frozen_data; - jh->b_frozen_data = NULL; - } - } else if (jh->b_frozen_data) { - jbd_free(jh->b_frozen_data, bh->b_size); - jh->b_frozen_data = NULL; - } - - spin_lock(&journal->j_list_lock); - cp_transaction = jh->b_cp_transaction; - if (cp_transaction) { - JBUFFER_TRACE(jh, "remove from old cp transaction"); - __journal_remove_checkpoint(jh); - } - - /* Only re-checkpoint the buffer_head if it is marked - * dirty. If the buffer was added to the BJ_Forget list - * by journal_forget, it may no longer be dirty and - * there's no point in keeping a checkpoint record for - * it. */ - - /* - * A buffer which has been freed while still being journaled by - * a previous transaction. - */ - if (buffer_freed(bh)) { - /* - * If the running transaction is the one containing - * "add to orphan" operation (b_next_transaction != - * NULL), we have to wait for that transaction to - * commit before we can really get rid of the buffer. - * So just clear b_modified to not confuse transaction - * credit accounting and refile the buffer to - * BJ_Forget of the running transaction. If the just - * committed transaction contains "add to orphan" - * operation, we can completely invalidate the buffer - * now. We are rather throughout in that since the - * buffer may be still accessible when blocksize < - * pagesize and it is attached to the last partial - * page. - */ - jh->b_modified = 0; - if (!jh->b_next_transaction) { - clear_buffer_freed(bh); - clear_buffer_jbddirty(bh); - clear_buffer_mapped(bh); - clear_buffer_new(bh); - clear_buffer_req(bh); - bh->b_bdev = NULL; - } - } - - if (buffer_jbddirty(bh)) { - JBUFFER_TRACE(jh, "add to new checkpointing trans"); - __journal_insert_checkpoint(jh, commit_transaction); - if (is_journal_aborted(journal)) - clear_buffer_jbddirty(bh); - } else { - J_ASSERT_BH(bh, !buffer_dirty(bh)); - /* - * The buffer on BJ_Forget list and not jbddirty means - * it has been freed by this transaction and hence it - * could not have been reallocated until this - * transaction has committed. *BUT* it could be - * reallocated once we have written all the data to - * disk and before we process the buffer on BJ_Forget - * list. - */ - if (!jh->b_next_transaction) - try_to_free = 1; - } - JBUFFER_TRACE(jh, "refile or unfile freed buffer"); - __journal_refile_buffer(jh); - jbd_unlock_bh_state(bh); - if (try_to_free) - release_buffer_page(bh); - else - __brelse(bh); - cond_resched_lock(&journal->j_list_lock); - } - spin_unlock(&journal->j_list_lock); - /* - * This is a bit sleazy. We use j_list_lock to protect transition - * of a transaction into T_FINISHED state and calling - * __journal_drop_transaction(). Otherwise we could race with - * other checkpointing code processing the transaction... - */ - spin_lock(&journal->j_state_lock); - spin_lock(&journal->j_list_lock); - /* - * Now recheck if some buffers did not get attached to the transaction - * while the lock was dropped... - */ - if (commit_transaction->t_forget) { - spin_unlock(&journal->j_list_lock); - spin_unlock(&journal->j_state_lock); - goto restart_loop; - } - - /* Done with this transaction! */ - - jbd_debug(3, "JBD: commit phase 8\n"); - - J_ASSERT(commit_transaction->t_state == T_COMMIT_RECORD); - - commit_transaction->t_state = T_FINISHED; - J_ASSERT(commit_transaction == journal->j_committing_transaction); - journal->j_commit_sequence = commit_transaction->t_tid; - journal->j_committing_transaction = NULL; - commit_time = ktime_to_ns(ktime_sub(ktime_get(), start_time)); - - /* - * weight the commit time higher than the average time so we don't - * react too strongly to vast changes in commit time - */ - if (likely(journal->j_average_commit_time)) - journal->j_average_commit_time = (commit_time*3 + - journal->j_average_commit_time) / 4; - else - journal->j_average_commit_time = commit_time; - - spin_unlock(&journal->j_state_lock); - - if (commit_transaction->t_checkpoint_list == NULL && - commit_transaction->t_checkpoint_io_list == NULL) { - __journal_drop_transaction(journal, commit_transaction); - } else { - if (journal->j_checkpoint_transactions == NULL) { - journal->j_checkpoint_transactions = commit_transaction; - commit_transaction->t_cpnext = commit_transaction; - commit_transaction->t_cpprev = commit_transaction; - } else { - commit_transaction->t_cpnext = - journal->j_checkpoint_transactions; - commit_transaction->t_cpprev = - commit_transaction->t_cpnext->t_cpprev; - commit_transaction->t_cpnext->t_cpprev = - commit_transaction; - commit_transaction->t_cpprev->t_cpnext = - commit_transaction; - } - } - spin_unlock(&journal->j_list_lock); - - trace_jbd_end_commit(journal, commit_transaction); - jbd_debug(1, "JBD: commit %d complete, head %d\n", - journal->j_commit_sequence, journal->j_tail_sequence); - - wake_up(&journal->j_wait_done_commit); -} diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c deleted file mode 100644 index c46a79a..0000000 --- a/fs/jbd/journal.c +++ /dev/null @@ -1,2145 +0,0 @@ -/* - * linux/fs/jbd/journal.c - * - * Written by Stephen C. Tweedie <sct@redhat.com>, 1998 - * - * Copyright 1998 Red Hat corp --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Generic filesystem journal-writing code; part of the ext2fs - * journaling system. - * - * This file manages journals: areas of disk reserved for logging - * transactional updates. This includes the kernel journaling thread - * which is responsible for scheduling updates to the log. - * - * We do not actually manage the physical storage of the journal in this - * file: that is left to a per-journal policy function, which allows us - * to store the journal within a filesystem-specified area for ext2 - * journaling (ext2 can use a reserved inode for storing the log). - */ - -#include <linux/module.h> -#include <linux/time.h> -#include <linux/fs.h> -#include <linux/jbd.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/freezer.h> -#include <linux/pagemap.h> -#include <linux/kthread.h> -#include <linux/poison.h> -#include <linux/proc_fs.h> -#include <linux/debugfs.h> -#include <linux/ratelimit.h> - -#define CREATE_TRACE_POINTS -#include <trace/events/jbd.h> - -#include <asm/uaccess.h> -#include <asm/page.h> - -EXPORT_SYMBOL(journal_start); -EXPORT_SYMBOL(journal_restart); -EXPORT_SYMBOL(journal_extend); -EXPORT_SYMBOL(journal_stop); -EXPORT_SYMBOL(journal_lock_updates); -EXPORT_SYMBOL(journal_unlock_updates); -EXPORT_SYMBOL(journal_get_write_access); -EXPORT_SYMBOL(journal_get_create_access); -EXPORT_SYMBOL(journal_get_undo_access); -EXPORT_SYMBOL(journal_dirty_data); -EXPORT_SYMBOL(journal_dirty_metadata); -EXPORT_SYMBOL(journal_release_buffer); -EXPORT_SYMBOL(journal_forget); -#if 0 -EXPORT_SYMBOL(journal_sync_buffer); -#endif -EXPORT_SYMBOL(journal_flush); -EXPORT_SYMBOL(journal_revoke); - -EXPORT_SYMBOL(journal_init_dev); -EXPORT_SYMBOL(journal_init_inode); -EXPORT_SYMBOL(journal_update_format); -EXPORT_SYMBOL(journal_check_used_features); -EXPORT_SYMBOL(journal_check_available_features); -EXPORT_SYMBOL(journal_set_features); -EXPORT_SYMBOL(journal_create); -EXPORT_SYMBOL(journal_load); -EXPORT_SYMBOL(journal_destroy); -EXPORT_SYMBOL(journal_abort); -EXPORT_SYMBOL(journal_errno); -EXPORT_SYMBOL(journal_ack_err); -EXPORT_SYMBOL(journal_clear_err); -EXPORT_SYMBOL(log_wait_commit); -EXPORT_SYMBOL(log_start_commit); -EXPORT_SYMBOL(journal_start_commit); -EXPORT_SYMBOL(journal_force_commit_nested); -EXPORT_SYMBOL(journal_wipe); -EXPORT_SYMBOL(journal_blocks_per_page); -EXPORT_SYMBOL(journal_invalidatepage); -EXPORT_SYMBOL(journal_try_to_free_buffers); -EXPORT_SYMBOL(journal_force_commit); - -static int journal_convert_superblock_v1(journal_t *, journal_superblock_t *); -static void __journal_abort_soft (journal_t *journal, int errno); -static const char *journal_dev_name(journal_t *journal, char *buffer); - -#ifdef CONFIG_JBD_DEBUG -void __jbd_debug(int level, const char *file, const char *func, - unsigned int line, const char *fmt, ...) -{ - struct va_format vaf; - va_list args; - - if (level > journal_enable_debug) - return; - va_start(args, fmt); - vaf.fmt = fmt; - vaf.va = &args; - printk(KERN_DEBUG "%s: (%s, %u): %pV\n", file, func, line, &vaf); - va_end(args); -} -EXPORT_SYMBOL(__jbd_debug); -#endif - -/* - * Helper function used to manage commit timeouts - */ - -static void commit_timeout(unsigned long __data) -{ - struct task_struct * p = (struct task_struct *) __data; - - wake_up_process(p); -} - -/* - * kjournald: The main thread function used to manage a logging device - * journal. - * - * This kernel thread is responsible for two things: - * - * 1) COMMIT: Every so often we need to commit the current state of the - * filesystem to disk. The journal thread is responsible for writing - * all of the metadata buffers to disk. - * - * 2) CHECKPOINT: We cannot reuse a used section of the log file until all - * of the data in that part of the log has been rewritten elsewhere on - * the disk. Flushing these old buffers to reclaim space in the log is - * known as checkpointing, and this thread is responsible for that job. - */ - -static int kjournald(void *arg) -{ - journal_t *journal = arg; - transaction_t *transaction; - - /* - * Set up an interval timer which can be used to trigger a commit wakeup - * after the commit interval expires - */ - setup_timer(&journal->j_commit_timer, commit_timeout, - (unsigned long)current); - - set_freezable(); - - /* Record that the journal thread is running */ - journal->j_task = current; - wake_up(&journal->j_wait_done_commit); - - printk(KERN_INFO "kjournald starting. Commit interval %ld seconds\n", - journal->j_commit_interval / HZ); - - /* - * And now, wait forever for commit wakeup events. - */ - spin_lock(&journal->j_state_lock); - -loop: - if (journal->j_flags & JFS_UNMOUNT) - goto end_loop; - - jbd_debug(1, "commit_sequence=%d, commit_request=%d\n", - journal->j_commit_sequence, journal->j_commit_request); - - if (journal->j_commit_sequence != journal->j_commit_request) { - jbd_debug(1, "OK, requests differ\n"); - spin_unlock(&journal->j_state_lock); - del_timer_sync(&journal->j_commit_timer); - journal_commit_transaction(journal); - spin_lock(&journal->j_state_lock); - goto loop; - } - - wake_up(&journal->j_wait_done_commit); - if (freezing(current)) { - /* - * The simpler the better. Flushing journal isn't a - * good idea, because that depends on threads that may - * be already stopped. - */ - jbd_debug(1, "Now suspending kjournald\n"); - spin_unlock(&journal->j_state_lock); - try_to_freeze(); - spin_lock(&journal->j_state_lock); - } else { - /* - * We assume on resume that commits are already there, - * so we don't sleep - */ - DEFINE_WAIT(wait); - int should_sleep = 1; - - prepare_to_wait(&journal->j_wait_commit, &wait, - TASK_INTERRUPTIBLE); - if (journal->j_commit_sequence != journal->j_commit_request) - should_sleep = 0; - transaction = journal->j_running_transaction; - if (transaction && time_after_eq(jiffies, - transaction->t_expires)) - should_sleep = 0; - if (journal->j_flags & JFS_UNMOUNT) - should_sleep = 0; - if (should_sleep) { - spin_unlock(&journal->j_state_lock); - schedule(); - spin_lock(&journal->j_state_lock); - } - finish_wait(&journal->j_wait_commit, &wait); - } - - jbd_debug(1, "kjournald wakes\n"); - - /* - * Were we woken up by a commit wakeup event? - */ - transaction = journal->j_running_transaction; - if (transaction && time_after_eq(jiffies, transaction->t_expires)) { - journal->j_commit_request = transaction->t_tid; - jbd_debug(1, "woke because of timeout\n"); - } - goto loop; - -end_loop: - spin_unlock(&journal->j_state_lock); - del_timer_sync(&journal->j_commit_timer); - journal->j_task = NULL; - wake_up(&journal->j_wait_done_commit); - jbd_debug(1, "Journal thread exiting.\n"); - return 0; -} - -static int journal_start_thread(journal_t *journal) -{ - struct task_struct *t; - - t = kthread_run(kjournald, journal, "kjournald"); - if (IS_ERR(t)) - return PTR_ERR(t); - - wait_event(journal->j_wait_done_commit, journal->j_task != NULL); - return 0; -} - -static void journal_kill_thread(journal_t *journal) -{ - spin_lock(&journal->j_state_lock); - journal->j_flags |= JFS_UNMOUNT; - - while (journal->j_task) { - wake_up(&journal->j_wait_commit); - spin_unlock(&journal->j_state_lock); - wait_event(journal->j_wait_done_commit, - journal->j_task == NULL); - spin_lock(&journal->j_state_lock); - } - spin_unlock(&journal->j_state_lock); -} - -/* - * journal_write_metadata_buffer: write a metadata buffer to the journal. - * - * Writes a metadata buffer to a given disk block. The actual IO is not - * performed but a new buffer_head is constructed which labels the data - * to be written with the correct destination disk block. - * - * Any magic-number escaping which needs to be done will cause a - * copy-out here. If the buffer happens to start with the - * JFS_MAGIC_NUMBER, then we can't write it to the log directly: the - * magic number is only written to the log for descripter blocks. In - * this case, we copy the data and replace the first word with 0, and we - * return a result code which indicates that this buffer needs to be - * marked as an escaped buffer in the corresponding log descriptor - * block. The missing word can then be restored when the block is read - * during recovery. - * - * If the source buffer has already been modified by a new transaction - * since we took the last commit snapshot, we use the frozen copy of - * that data for IO. If we end up using the existing buffer_head's data - * for the write, then we *have* to lock the buffer to prevent anyone - * else from using and possibly modifying it while the IO is in - * progress. - * - * The function returns a pointer to the buffer_heads to be used for IO. - * - * We assume that the journal has already been locked in this function. - * - * Return value: - * <0: Error - * >=0: Finished OK - * - * On success: - * Bit 0 set == escape performed on the data - * Bit 1 set == buffer copy-out performed (kfree the data after IO) - */ - -int journal_write_metadata_buffer(transaction_t *transaction, - struct journal_head *jh_in, - struct journal_head **jh_out, - unsigned int blocknr) -{ - int need_copy_out = 0; - int done_copy_out = 0; - int do_escape = 0; - char *mapped_data; - struct buffer_head *new_bh; - struct journal_head *new_jh; - struct page *new_page; - unsigned int new_offset; - struct buffer_head *bh_in = jh2bh(jh_in); - journal_t *journal = transaction->t_journal; - - /* - * The buffer really shouldn't be locked: only the current committing - * transaction is allowed to write it, so nobody else is allowed - * to do any IO. - * - * akpm: except if we're journalling data, and write() output is - * also part of a shared mapping, and another thread has - * decided to launch a writepage() against this buffer. - */ - J_ASSERT_BH(bh_in, buffer_jbddirty(bh_in)); - - new_bh = alloc_buffer_head(GFP_NOFS|__GFP_NOFAIL); - /* keep subsequent assertions sane */ - atomic_set(&new_bh->b_count, 1); - new_jh = journal_add_journal_head(new_bh); /* This sleeps */ - - /* - * If a new transaction has already done a buffer copy-out, then - * we use that version of the data for the commit. - */ - jbd_lock_bh_state(bh_in); -repeat: - if (jh_in->b_frozen_data) { - done_copy_out = 1; - new_page = virt_to_page(jh_in->b_frozen_data); - new_offset = offset_in_page(jh_in->b_frozen_data); - } else { - new_page = jh2bh(jh_in)->b_page; - new_offset = offset_in_page(jh2bh(jh_in)->b_data); - } - - mapped_data = kmap_atomic(new_page); - /* - * Check for escaping - */ - if (*((__be32 *)(mapped_data + new_offset)) == - cpu_to_be32(JFS_MAGIC_NUMBER)) { - need_copy_out = 1; - do_escape = 1; - } - kunmap_atomic(mapped_data); - - /* - * Do we need to do a data copy? - */ - if (need_copy_out && !done_copy_out) { - char *tmp; - - jbd_unlock_bh_state(bh_in); - tmp = jbd_alloc(bh_in->b_size, GFP_NOFS); - jbd_lock_bh_state(bh_in); - if (jh_in->b_frozen_data) { - jbd_free(tmp, bh_in->b_size); - goto repeat; - } - - jh_in->b_frozen_data = tmp; - mapped_data = kmap_atomic(new_page); - memcpy(tmp, mapped_data + new_offset, jh2bh(jh_in)->b_size); - kunmap_atomic(mapped_data); - - new_page = virt_to_page(tmp); - new_offset = offset_in_page(tmp); - done_copy_out = 1; - } - - /* - * Did we need to do an escaping? Now we've done all the - * copying, we can finally do so. - */ - if (do_escape) { - mapped_data = kmap_atomic(new_page); - *((unsigned int *)(mapped_data + new_offset)) = 0; - kunmap_atomic(mapped_data); - } - - set_bh_page(new_bh, new_page, new_offset); - new_jh->b_transaction = NULL; - new_bh->b_size = jh2bh(jh_in)->b_size; - new_bh->b_bdev = transaction->t_journal->j_dev; - new_bh->b_blocknr = blocknr; - set_buffer_mapped(new_bh); - set_buffer_dirty(new_bh); - - *jh_out = new_jh; - - /* - * The to-be-written buffer needs to get moved to the io queue, - * and the original buffer whose contents we are shadowing or - * copying is moved to the transaction's shadow queue. - */ - JBUFFER_TRACE(jh_in, "file as BJ_Shadow"); - spin_lock(&journal->j_list_lock); - __journal_file_buffer(jh_in, transaction, BJ_Shadow); - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh_in); - - JBUFFER_TRACE(new_jh, "file as BJ_IO"); - journal_file_buffer(new_jh, transaction, BJ_IO); - - return do_escape | (done_copy_out << 1); -} - -/* - * Allocation code for the journal file. Manage the space left in the - * journal, so that we can begin checkpointing when appropriate. - */ - -/* - * __log_space_left: Return the number of free blocks left in the journal. - * - * Called with the journal already locked. - * - * Called under j_state_lock - */ - -int __log_space_left(journal_t *journal) -{ - int left = journal->j_free; - - assert_spin_locked(&journal->j_state_lock); - - /* - * Be pessimistic here about the number of those free blocks which - * might be required for log descriptor control blocks. - */ - -#define MIN_LOG_RESERVED_BLOCKS 32 /* Allow for rounding errors */ - - left -= MIN_LOG_RESERVED_BLOCKS; - - if (left <= 0) - return 0; - left -= (left >> 3); - return left; -} - -/* - * Called under j_state_lock. Returns true if a transaction commit was started. - */ -int __log_start_commit(journal_t *journal, tid_t target) -{ - /* - * The only transaction we can possibly wait upon is the - * currently running transaction (if it exists). Otherwise, - * the target tid must be an old one. - */ - if (journal->j_commit_request != target && - journal->j_running_transaction && - journal->j_running_transaction->t_tid == target) { - /* - * We want a new commit: OK, mark the request and wakeup the - * commit thread. We do _not_ do the commit ourselves. - */ - - journal->j_commit_request = target; - jbd_debug(1, "JBD: requesting commit %d/%d\n", - journal->j_commit_request, - journal->j_commit_sequence); - wake_up(&journal->j_wait_commit); - return 1; - } else if (!tid_geq(journal->j_commit_request, target)) - /* This should never happen, but if it does, preserve - the evidence before kjournald goes into a loop and - increments j_commit_sequence beyond all recognition. */ - WARN_ONCE(1, "jbd: bad log_start_commit: %u %u %u %u\n", - journal->j_commit_request, journal->j_commit_sequence, - target, journal->j_running_transaction ? - journal->j_running_transaction->t_tid : 0); - return 0; -} - -int log_start_commit(journal_t *journal, tid_t tid) -{ - int ret; - - spin_lock(&journal->j_state_lock); - ret = __log_start_commit(journal, tid); - spin_unlock(&journal->j_state_lock); - return ret; -} - -/* - * Force and wait upon a commit if the calling process is not within - * transaction. This is used for forcing out undo-protected data which contains - * bitmaps, when the fs is running out of space. - * - * We can only force the running transaction if we don't have an active handle; - * otherwise, we will deadlock. - * - * Returns true if a transaction was started. - */ -int journal_force_commit_nested(journal_t *journal) -{ - transaction_t *transaction = NULL; - tid_t tid; - - spin_lock(&journal->j_state_lock); - if (journal->j_running_transaction && !current->journal_info) { - transaction = journal->j_running_transaction; - __log_start_commit(journal, transaction->t_tid); - } else if (journal->j_committing_transaction) - transaction = journal->j_committing_transaction; - - if (!transaction) { - spin_unlock(&journal->j_state_lock); - return 0; /* Nothing to retry */ - } - - tid = transaction->t_tid; - spin_unlock(&journal->j_state_lock); - log_wait_commit(journal, tid); - return 1; -} - -/* - * Start a commit of the current running transaction (if any). Returns true - * if a transaction is going to be committed (or is currently already - * committing), and fills its tid in at *ptid - */ -int journal_start_commit(journal_t *journal, tid_t *ptid) -{ - int ret = 0; - - spin_lock(&journal->j_state_lock); - if (journal->j_running_transaction) { - tid_t tid = journal->j_running_transaction->t_tid; - - __log_start_commit(journal, tid); - /* There's a running transaction and we've just made sure - * it's commit has been scheduled. */ - if (ptid) - *ptid = tid; - ret = 1; - } else if (journal->j_committing_transaction) { - /* - * If commit has been started, then we have to wait for - * completion of that transaction. - */ - if (ptid) - *ptid = journal->j_committing_transaction->t_tid; - ret = 1; - } - spin_unlock(&journal->j_state_lock); - return ret; -} - -/* - * Wait for a specified commit to complete. - * The caller may not hold the journal lock. - */ -int log_wait_commit(journal_t *journal, tid_t tid) -{ - int err = 0; - -#ifdef CONFIG_JBD_DEBUG - spin_lock(&journal->j_state_lock); - if (!tid_geq(journal->j_commit_request, tid)) { - printk(KERN_ERR - "%s: error: j_commit_request=%d, tid=%d\n", - __func__, journal->j_commit_request, tid); - } - spin_unlock(&journal->j_state_lock); -#endif - spin_lock(&journal->j_state_lock); - /* - * Not running or committing trans? Must be already committed. This - * saves us from waiting for a *long* time when tid overflows. - */ - if (!((journal->j_running_transaction && - journal->j_running_transaction->t_tid == tid) || - (journal->j_committing_transaction && - journal->j_committing_transaction->t_tid == tid))) - goto out_unlock; - - if (!tid_geq(journal->j_commit_waited, tid)) - journal->j_commit_waited = tid; - while (tid_gt(tid, journal->j_commit_sequence)) { - jbd_debug(1, "JBD: want %d, j_commit_sequence=%d\n", - tid, journal->j_commit_sequence); - wake_up(&journal->j_wait_commit); - spin_unlock(&journal->j_state_lock); - wait_event(journal->j_wait_done_commit, - !tid_gt(tid, journal->j_commit_sequence)); - spin_lock(&journal->j_state_lock); - } -out_unlock: - spin_unlock(&journal->j_state_lock); - - if (unlikely(is_journal_aborted(journal))) - err = -EIO; - return err; -} - -/* - * Return 1 if a given transaction has not yet sent barrier request - * connected with a transaction commit. If 0 is returned, transaction - * may or may not have sent the barrier. Used to avoid sending barrier - * twice in common cases. - */ -int journal_trans_will_send_data_barrier(journal_t *journal, tid_t tid) -{ - int ret = 0; - transaction_t *commit_trans; - - if (!(journal->j_flags & JFS_BARRIER)) - return 0; - spin_lock(&journal->j_state_lock); - /* Transaction already committed? */ - if (tid_geq(journal->j_commit_sequence, tid)) - goto out; - /* - * Transaction is being committed and we already proceeded to - * writing commit record? - */ - commit_trans = journal->j_committing_transaction; - if (commit_trans && commit_trans->t_tid == tid && - commit_trans->t_state >= T_COMMIT_RECORD) - goto out; - ret = 1; -out: - spin_unlock(&journal->j_state_lock); - return ret; -} -EXPORT_SYMBOL(journal_trans_will_send_data_barrier); - -/* - * Log buffer allocation routines: - */ - -int journal_next_log_block(journal_t *journal, unsigned int *retp) -{ - unsigned int blocknr; - - spin_lock(&journal->j_state_lock); - J_ASSERT(journal->j_free > 1); - - blocknr = journal->j_head; - journal->j_head++; - journal->j_free--; - if (journal->j_head == journal->j_last) - journal->j_head = journal->j_first; - spin_unlock(&journal->j_state_lock); - return journal_bmap(journal, blocknr, retp); -} - -/* - * Conversion of logical to physical block numbers for the journal - * - * On external journals the journal blocks are identity-mapped, so - * this is a no-op. If needed, we can use j_blk_offset - everything is - * ready. - */ -int journal_bmap(journal_t *journal, unsigned int blocknr, - unsigned int *retp) -{ - int err = 0; - unsigned int ret; - - if (journal->j_inode) { - ret = bmap(journal->j_inode, blocknr); - if (ret) - *retp = ret; - else { - char b[BDEVNAME_SIZE]; - - printk(KERN_ALERT "%s: journal block not found " - "at offset %u on %s\n", - __func__, - blocknr, - bdevname(journal->j_dev, b)); - err = -EIO; - __journal_abort_soft(journal, err); - } - } else { - *retp = blocknr; /* +journal->j_blk_offset */ - } - return err; -} - -/* - * We play buffer_head aliasing tricks to write data/metadata blocks to - * the journal without copying their contents, but for journal - * descriptor blocks we do need to generate bona fide buffers. - * - * After the caller of journal_get_descriptor_buffer() has finished modifying - * the buffer's contents they really should run flush_dcache_page(bh->b_page). - * But we don't bother doing that, so there will be coherency problems with - * mmaps of blockdevs which hold live JBD-controlled filesystems. - */ -struct journal_head *journal_get_descriptor_buffer(journal_t *journal) -{ - struct buffer_head *bh; - unsigned int blocknr; - int err; - - err = journal_next_log_block(journal, &blocknr); - - if (err) - return NULL; - - bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize); - if (!bh) - return NULL; - lock_buffer(bh); - memset(bh->b_data, 0, journal->j_blocksize); - set_buffer_uptodate(bh); - unlock_buffer(bh); - BUFFER_TRACE(bh, "return this buffer"); - return journal_add_journal_head(bh); -} - -/* - * Management for journal control blocks: functions to create and - * destroy journal_t structures, and to initialise and read existing - * journal blocks from disk. */ - -/* First: create and setup a journal_t object in memory. We initialise - * very few fields yet: that has to wait until we have created the - * journal structures from from scratch, or loaded them from disk. */ - -static journal_t * journal_init_common (void) -{ - journal_t *journal; - int err; - - journal = kzalloc(sizeof(*journal), GFP_KERNEL); - if (!journal) - goto fail; - - init_waitqueue_head(&journal->j_wait_transaction_locked); - init_waitqueue_head(&journal->j_wait_logspace); - init_waitqueue_head(&journal->j_wait_done_commit); - init_waitqueue_head(&journal->j_wait_checkpoint); - init_waitqueue_head(&journal->j_wait_commit); - init_waitqueue_head(&journal->j_wait_updates); - mutex_init(&journal->j_checkpoint_mutex); - spin_lock_init(&journal->j_revoke_lock); - spin_lock_init(&journal->j_list_lock); - spin_lock_init(&journal->j_state_lock); - - journal->j_commit_interval = (HZ * JBD_DEFAULT_MAX_COMMIT_AGE); - - /* The journal is marked for error until we succeed with recovery! */ - journal->j_flags = JFS_ABORT; - - /* Set up a default-sized revoke table for the new mount. */ - err = journal_init_revoke(journal, JOURNAL_REVOKE_DEFAULT_HASH); - if (err) { - kfree(journal); - goto fail; - } - return journal; -fail: - return NULL; -} - -/* journal_init_dev and journal_init_inode: - * - * Create a journal structure assigned some fixed set of disk blocks to - * the journal. We don't actually touch those disk blocks yet, but we - * need to set up all of the mapping information to tell the journaling - * system where the journal blocks are. - * - */ - -/** - * journal_t * journal_init_dev() - creates and initialises a journal structure - * @bdev: Block device on which to create the journal - * @fs_dev: Device which hold journalled filesystem for this journal. - * @start: Block nr Start of journal. - * @len: Length of the journal in blocks. - * @blocksize: blocksize of journalling device - * - * Returns: a newly created journal_t * - * - * journal_init_dev creates a journal which maps a fixed contiguous - * range of blocks on an arbitrary block device. - * - */ -journal_t * journal_init_dev(struct block_device *bdev, - struct block_device *fs_dev, - int start, int len, int blocksize) -{ - journal_t *journal = journal_init_common(); - struct buffer_head *bh; - int n; - - if (!journal) - return NULL; - - /* journal descriptor can store up to n blocks -bzzz */ - journal->j_blocksize = blocksize; - n = journal->j_blocksize / sizeof(journal_block_tag_t); - journal->j_wbufsize = n; - journal->j_wbuf = kmalloc(n * sizeof(struct buffer_head*), GFP_KERNEL); - if (!journal->j_wbuf) { - printk(KERN_ERR "%s: Can't allocate bhs for commit thread\n", - __func__); - goto out_err; - } - journal->j_dev = bdev; - journal->j_fs_dev = fs_dev; - journal->j_blk_offset = start; - journal->j_maxlen = len; - - bh = __getblk(journal->j_dev, start, journal->j_blocksize); - if (!bh) { - printk(KERN_ERR - "%s: Cannot get buffer for journal superblock\n", - __func__); - goto out_err; - } - journal->j_sb_buffer = bh; - journal->j_superblock = (journal_superblock_t *)bh->b_data; - - return journal; -out_err: - kfree(journal->j_wbuf); - kfree(journal); - return NULL; -} - -/** - * journal_t * journal_init_inode () - creates a journal which maps to a inode. - * @inode: An inode to create the journal in - * - * journal_init_inode creates a journal which maps an on-disk inode as - * the journal. The inode must exist already, must support bmap() and - * must have all data blocks preallocated. - */ -journal_t * journal_init_inode (struct inode *inode) -{ - struct buffer_head *bh; - journal_t *journal = journal_init_common(); - int err; - int n; - unsigned int blocknr; - - if (!journal) - return NULL; - - journal->j_dev = journal->j_fs_dev = inode->i_sb->s_bdev; - journal->j_inode = inode; - jbd_debug(1, - "journal %p: inode %s/%ld, size %Ld, bits %d, blksize %ld\n", - journal, inode->i_sb->s_id, inode->i_ino, - (long long) inode->i_size, - inode->i_sb->s_blocksize_bits, inode->i_sb->s_blocksize); - - journal->j_maxlen = inode->i_size >> inode->i_sb->s_blocksize_bits; - journal->j_blocksize = inode->i_sb->s_blocksize; - - /* journal descriptor can store up to n blocks -bzzz */ - n = journal->j_blocksize / sizeof(journal_block_tag_t); - journal->j_wbufsize = n; - journal->j_wbuf = kmalloc(n * sizeof(struct buffer_head*), GFP_KERNEL); - if (!journal->j_wbuf) { - printk(KERN_ERR "%s: Can't allocate bhs for commit thread\n", - __func__); - goto out_err; - } - - err = journal_bmap(journal, 0, &blocknr); - /* If that failed, give up */ - if (err) { - printk(KERN_ERR "%s: Cannot locate journal superblock\n", - __func__); - goto out_err; - } - - bh = getblk_unmovable(journal->j_dev, blocknr, journal->j_blocksize); - if (!bh) { - printk(KERN_ERR - "%s: Cannot get buffer for journal superblock\n", - __func__); - goto out_err; - } - journal->j_sb_buffer = bh; - journal->j_superblock = (journal_superblock_t *)bh->b_data; - - return journal; -out_err: - kfree(journal->j_wbuf); - kfree(journal); - return NULL; -} - -/* - * If the journal init or create aborts, we need to mark the journal - * superblock as being NULL to prevent the journal destroy from writing - * back a bogus superblock. - */ -static void journal_fail_superblock (journal_t *journal) -{ - struct buffer_head *bh = journal->j_sb_buffer; - brelse(bh); - journal->j_sb_buffer = NULL; -} - -/* - * Given a journal_t structure, initialise the various fields for - * startup of a new journaling session. We use this both when creating - * a journal, and after recovering an old journal to reset it for - * subsequent use. - */ - -static int journal_reset(journal_t *journal) -{ - journal_superblock_t *sb = journal->j_superblock; - unsigned int first, last; - - first = be32_to_cpu(sb->s_first); - last = be32_to_cpu(sb->s_maxlen); - if (first + JFS_MIN_JOURNAL_BLOCKS > last + 1) { - printk(KERN_ERR "JBD: Journal too short (blocks %u-%u).\n", - first, last); - journal_fail_superblock(journal); - return -EINVAL; - } - - journal->j_first = first; - journal->j_last = last; - - journal->j_head = first; - journal->j_tail = first; - journal->j_free = last - first; - - journal->j_tail_sequence = journal->j_transaction_sequence; - journal->j_commit_sequence = journal->j_transaction_sequence - 1; - journal->j_commit_request = journal->j_commit_sequence; - - journal->j_max_transaction_buffers = journal->j_maxlen / 4; - - /* - * As a special case, if the on-disk copy is already marked as needing - * no recovery (s_start == 0), then we can safely defer the superblock - * update until the next commit by setting JFS_FLUSHED. This avoids - * attempting a write to a potential-readonly device. - */ - if (sb->s_start == 0) { - jbd_debug(1,"JBD: Skipping superblock update on recovered sb " - "(start %u, seq %d, errno %d)\n", - journal->j_tail, journal->j_tail_sequence, - journal->j_errno); - journal->j_flags |= JFS_FLUSHED; - } else { - /* Lock here to make assertions happy... */ - mutex_lock(&journal->j_checkpoint_mutex); - /* - * Update log tail information. We use WRITE_FUA since new - * transaction will start reusing journal space and so we - * must make sure information about current log tail is on - * disk before that. - */ - journal_update_sb_log_tail(journal, - journal->j_tail_sequence, - journal->j_tail, - WRITE_FUA); - mutex_unlock(&journal->j_checkpoint_mutex); - } - return journal_start_thread(journal); -} - -/** - * int journal_create() - Initialise the new journal file - * @journal: Journal to create. This structure must have been initialised - * - * Given a journal_t structure which tells us which disk blocks we can - * use, create a new journal superblock and initialise all of the - * journal fields from scratch. - **/ -int journal_create(journal_t *journal) -{ - unsigned int blocknr; - struct buffer_head *bh; - journal_superblock_t *sb; - int i, err; - - if (journal->j_maxlen < JFS_MIN_JOURNAL_BLOCKS) { - printk (KERN_ERR "Journal length (%d blocks) too short.\n", - journal->j_maxlen); - journal_fail_superblock(journal); - return -EINVAL; - } - - if (journal->j_inode == NULL) { - /* - * We don't know what block to start at! - */ - printk(KERN_EMERG - "%s: creation of journal on external device!\n", - __func__); - BUG(); - } - - /* Zero out the entire journal on disk. We cannot afford to - have any blocks on disk beginning with JFS_MAGIC_NUMBER. */ - jbd_debug(1, "JBD: Zeroing out journal blocks...\n"); - for (i = 0; i < journal->j_maxlen; i++) { - err = journal_bmap(journal, i, &blocknr); - if (err) - return err; - bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize); - if (unlikely(!bh)) - return -ENOMEM; - lock_buffer(bh); - memset (bh->b_data, 0, journal->j_blocksize); - BUFFER_TRACE(bh, "marking dirty"); - mark_buffer_dirty(bh); - BUFFER_TRACE(bh, "marking uptodate"); - set_buffer_uptodate(bh); - unlock_buffer(bh); - __brelse(bh); - } - - sync_blockdev(journal->j_dev); - jbd_debug(1, "JBD: journal cleared.\n"); - - /* OK, fill in the initial static fields in the new superblock */ - sb = journal->j_superblock; - - sb->s_header.h_magic = cpu_to_be32(JFS_MAGIC_NUMBER); - sb->s_header.h_blocktype = cpu_to_be32(JFS_SUPERBLOCK_V2); - - sb->s_blocksize = cpu_to_be32(journal->j_blocksize); - sb->s_maxlen = cpu_to_be32(journal->j_maxlen); - sb->s_first = cpu_to_be32(1); - - journal->j_transaction_sequence = 1; - - journal->j_flags &= ~JFS_ABORT; - journal->j_format_version = 2; - - return journal_reset(journal); -} - -static void journal_write_superblock(journal_t *journal, int write_op) -{ - struct buffer_head *bh = journal->j_sb_buffer; - int ret; - - trace_journal_write_superblock(journal, write_op); - if (!(journal->j_flags & JFS_BARRIER)) - write_op &= ~(REQ_FUA | REQ_FLUSH); - lock_buffer(bh); - if (buffer_write_io_error(bh)) { - char b[BDEVNAME_SIZE]; - /* - * Oh, dear. A previous attempt to write the journal - * superblock failed. This could happen because the - * USB device was yanked out. Or it could happen to - * be a transient write error and maybe the block will - * be remapped. Nothing we can do but to retry the - * write and hope for the best. - */ - printk(KERN_ERR "JBD: previous I/O error detected " - "for journal superblock update for %s.\n", - journal_dev_name(journal, b)); - clear_buffer_write_io_error(bh); - set_buffer_uptodate(bh); - } - - get_bh(bh); - bh->b_end_io = end_buffer_write_sync; - ret = submit_bh(write_op, bh); - wait_on_buffer(bh); - if (buffer_write_io_error(bh)) { - clear_buffer_write_io_error(bh); - set_buffer_uptodate(bh); - ret = -EIO; - } - if (ret) { - char b[BDEVNAME_SIZE]; - printk(KERN_ERR "JBD: Error %d detected " - "when updating journal superblock for %s.\n", - ret, journal_dev_name(journal, b)); - } -} - -/** - * journal_update_sb_log_tail() - Update log tail in journal sb on disk. - * @journal: The journal to update. - * @tail_tid: TID of the new transaction at the tail of the log - * @tail_block: The first block of the transaction at the tail of the log - * @write_op: With which operation should we write the journal sb - * - * Update a journal's superblock information about log tail and write it to - * disk, waiting for the IO to complete. - */ -void journal_update_sb_log_tail(journal_t *journal, tid_t tail_tid, - unsigned int tail_block, int write_op) -{ - journal_superblock_t *sb = journal->j_superblock; - - BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex)); - jbd_debug(1,"JBD: updating superblock (start %u, seq %u)\n", - tail_block, tail_tid); - - sb->s_sequence = cpu_to_be32(tail_tid); - sb->s_start = cpu_to_be32(tail_block); - - journal_write_superblock(journal, write_op); - - /* Log is no longer empty */ - spin_lock(&journal->j_state_lock); - WARN_ON(!sb->s_sequence); - journal->j_flags &= ~JFS_FLUSHED; - spin_unlock(&journal->j_state_lock); -} - -/** - * mark_journal_empty() - Mark on disk journal as empty. - * @journal: The journal to update. - * - * Update a journal's dynamic superblock fields to show that journal is empty. - * Write updated superblock to disk waiting for IO to complete. - */ -static void mark_journal_empty(journal_t *journal) -{ - journal_superblock_t *sb = journal->j_superblock; - - BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex)); - spin_lock(&journal->j_state_lock); - /* Is it already empty? */ - if (sb->s_start == 0) { - spin_unlock(&journal->j_state_lock); - return; - } - jbd_debug(1, "JBD: Marking journal as empty (seq %d)\n", - journal->j_tail_sequence); - - sb->s_sequence = cpu_to_be32(journal->j_tail_sequence); - sb->s_start = cpu_to_be32(0); - spin_unlock(&journal->j_state_lock); - - journal_write_superblock(journal, WRITE_FUA); - - spin_lock(&journal->j_state_lock); - /* Log is empty */ - journal->j_flags |= JFS_FLUSHED; - spin_unlock(&journal->j_state_lock); -} - -/** - * journal_update_sb_errno() - Update error in the journal. - * @journal: The journal to update. - * - * Update a journal's errno. Write updated superblock to disk waiting for IO - * to complete. - */ -static void journal_update_sb_errno(journal_t *journal) -{ - journal_superblock_t *sb = journal->j_superblock; - - spin_lock(&journal->j_state_lock); - jbd_debug(1, "JBD: updating superblock error (errno %d)\n", - journal->j_errno); - sb->s_errno = cpu_to_be32(journal->j_errno); - spin_unlock(&journal->j_state_lock); - - journal_write_superblock(journal, WRITE_SYNC); -} - -/* - * Read the superblock for a given journal, performing initial - * validation of the format. - */ - -static int journal_get_superblock(journal_t *journal) -{ - struct buffer_head *bh; - journal_superblock_t *sb; - int err = -EIO; - - bh = journal->j_sb_buffer; - - J_ASSERT(bh != NULL); - if (!buffer_uptodate(bh)) { - ll_rw_block(READ, 1, &bh); - wait_on_buffer(bh); - if (!buffer_uptodate(bh)) { - printk (KERN_ERR - "JBD: IO error reading journal superblock\n"); - goto out; - } - } - - sb = journal->j_superblock; - - err = -EINVAL; - - if (sb->s_header.h_magic != cpu_to_be32(JFS_MAGIC_NUMBER) || - sb->s_blocksize != cpu_to_be32(journal->j_blocksize)) { - printk(KERN_WARNING "JBD: no valid journal superblock found\n"); - goto out; - } - - switch(be32_to_cpu(sb->s_header.h_blocktype)) { - case JFS_SUPERBLOCK_V1: - journal->j_format_version = 1; - break; - case JFS_SUPERBLOCK_V2: - journal->j_format_version = 2; - break; - default: - printk(KERN_WARNING "JBD: unrecognised superblock format ID\n"); - goto out; - } - - if (be32_to_cpu(sb->s_maxlen) < journal->j_maxlen) - journal->j_maxlen = be32_to_cpu(sb->s_maxlen); - else if (be32_to_cpu(sb->s_maxlen) > journal->j_maxlen) { - printk (KERN_WARNING "JBD: journal file too short\n"); - goto out; - } - - if (be32_to_cpu(sb->s_first) == 0 || - be32_to_cpu(sb->s_first) >= journal->j_maxlen) { - printk(KERN_WARNING - "JBD: Invalid start block of journal: %u\n", - be32_to_cpu(sb->s_first)); - goto out; - } - - return 0; - -out: - journal_fail_superblock(journal); - return err; -} - -/* - * Load the on-disk journal superblock and read the key fields into the - * journal_t. - */ - -static int load_superblock(journal_t *journal) -{ - int err; - journal_superblock_t *sb; - - err = journal_get_superblock(journal); - if (err) - return err; - - sb = journal->j_superblock; - - journal->j_tail_sequence = be32_to_cpu(sb->s_sequence); - journal->j_tail = be32_to_cpu(sb->s_start); - journal->j_first = be32_to_cpu(sb->s_first); - journal->j_last = be32_to_cpu(sb->s_maxlen); - journal->j_errno = be32_to_cpu(sb->s_errno); - - return 0; -} - - -/** - * int journal_load() - Read journal from disk. - * @journal: Journal to act on. - * - * Given a journal_t structure which tells us which disk blocks contain - * a journal, read the journal from disk to initialise the in-memory - * structures. - */ -int journal_load(journal_t *journal) -{ - int err; - journal_superblock_t *sb; - - err = load_superblock(journal); - if (err) - return err; - - sb = journal->j_superblock; - /* If this is a V2 superblock, then we have to check the - * features flags on it. */ - - if (journal->j_format_version >= 2) { - if ((sb->s_feature_ro_compat & - ~cpu_to_be32(JFS_KNOWN_ROCOMPAT_FEATURES)) || - (sb->s_feature_incompat & - ~cpu_to_be32(JFS_KNOWN_INCOMPAT_FEATURES))) { - printk (KERN_WARNING - "JBD: Unrecognised features on journal\n"); - return -EINVAL; - } - } - - /* Let the recovery code check whether it needs to recover any - * data from the journal. */ - if (journal_recover(journal)) - goto recovery_error; - - /* OK, we've finished with the dynamic journal bits: - * reinitialise the dynamic contents of the superblock in memory - * and reset them on disk. */ - if (journal_reset(journal)) - goto recovery_error; - - journal->j_flags &= ~JFS_ABORT; - journal->j_flags |= JFS_LOADED; - return 0; - -recovery_error: - printk (KERN_WARNING "JBD: recovery failed\n"); - return -EIO; -} - -/** - * void journal_destroy() - Release a journal_t structure. - * @journal: Journal to act on. - * - * Release a journal_t structure once it is no longer in use by the - * journaled object. - * Return <0 if we couldn't clean up the journal. - */ -int journal_destroy(journal_t *journal) -{ - int err = 0; - - - /* Wait for the commit thread to wake up and die. */ - journal_kill_thread(journal); - - /* Force a final log commit */ - if (journal->j_running_transaction) - journal_commit_transaction(journal); - - /* Force any old transactions to disk */ - - /* We cannot race with anybody but must keep assertions happy */ - mutex_lock(&journal->j_checkpoint_mutex); - /* Totally anal locking here... */ - spin_lock(&journal->j_list_lock); - while (journal->j_checkpoint_transactions != NULL) { - spin_unlock(&journal->j_list_lock); - log_do_checkpoint(journal); - spin_lock(&journal->j_list_lock); - } - - J_ASSERT(journal->j_running_transaction == NULL); - J_ASSERT(journal->j_committing_transaction == NULL); - J_ASSERT(journal->j_checkpoint_transactions == NULL); - spin_unlock(&journal->j_list_lock); - - if (journal->j_sb_buffer) { - if (!is_journal_aborted(journal)) { - journal->j_tail_sequence = - ++journal->j_transaction_sequence; - mark_journal_empty(journal); - } else - err = -EIO; - brelse(journal->j_sb_buffer); - } - mutex_unlock(&journal->j_checkpoint_mutex); - - iput(journal->j_inode); - if (journal->j_revoke) - journal_destroy_revoke(journal); - kfree(journal->j_wbuf); - kfree(journal); - - return err; -} - - -/** - *int journal_check_used_features () - Check if features specified are used. - * @journal: Journal to check. - * @compat: bitmask of compatible features - * @ro: bitmask of features that force read-only mount - * @incompat: bitmask of incompatible features - * - * Check whether the journal uses all of a given set of - * features. Return true (non-zero) if it does. - **/ - -int journal_check_used_features (journal_t *journal, unsigned long compat, - unsigned long ro, unsigned long incompat) -{ - journal_superblock_t *sb; - - if (!compat && !ro && !incompat) - return 1; - if (journal->j_format_version == 1) - return 0; - - sb = journal->j_superblock; - - if (((be32_to_cpu(sb->s_feature_compat) & compat) == compat) && - ((be32_to_cpu(sb->s_feature_ro_compat) & ro) == ro) && - ((be32_to_cpu(sb->s_feature_incompat) & incompat) == incompat)) - return 1; - - return 0; -} - -/** - * int journal_check_available_features() - Check feature set in journalling layer - * @journal: Journal to check. - * @compat: bitmask of compatible features - * @ro: bitmask of features that force read-only mount - * @incompat: bitmask of incompatible features - * - * Check whether the journaling code supports the use of - * all of a given set of features on this journal. Return true - * (non-zero) if it can. */ - -int journal_check_available_features (journal_t *journal, unsigned long compat, - unsigned long ro, unsigned long incompat) -{ - if (!compat && !ro && !incompat) - return 1; - - /* We can support any known requested features iff the - * superblock is in version 2. Otherwise we fail to support any - * extended sb features. */ - - if (journal->j_format_version != 2) - return 0; - - if ((compat & JFS_KNOWN_COMPAT_FEATURES) == compat && - (ro & JFS_KNOWN_ROCOMPAT_FEATURES) == ro && - (incompat & JFS_KNOWN_INCOMPAT_FEATURES) == incompat) - return 1; - - return 0; -} - -/** - * int journal_set_features () - Mark a given journal feature in the superblock - * @journal: Journal to act on. - * @compat: bitmask of compatible features - * @ro: bitmask of features that force read-only mount - * @incompat: bitmask of incompatible features - * - * Mark a given journal feature as present on the - * superblock. Returns true if the requested features could be set. - * - */ - -int journal_set_features (journal_t *journal, unsigned long compat, - unsigned long ro, unsigned long incompat) -{ - journal_superblock_t *sb; - - if (journal_check_used_features(journal, compat, ro, incompat)) - return 1; - - if (!journal_check_available_features(journal, compat, ro, incompat)) - return 0; - - jbd_debug(1, "Setting new features 0x%lx/0x%lx/0x%lx\n", - compat, ro, incompat); - - sb = journal->j_superblock; - - sb->s_feature_compat |= cpu_to_be32(compat); - sb->s_feature_ro_compat |= cpu_to_be32(ro); - sb->s_feature_incompat |= cpu_to_be32(incompat); - - return 1; -} - - -/** - * int journal_update_format () - Update on-disk journal structure. - * @journal: Journal to act on. - * - * Given an initialised but unloaded journal struct, poke about in the - * on-disk structure to update it to the most recent supported version. - */ -int journal_update_format (journal_t *journal) -{ - journal_superblock_t *sb; - int err; - - err = journal_get_superblock(journal); - if (err) - return err; - - sb = journal->j_superblock; - - switch (be32_to_cpu(sb->s_header.h_blocktype)) { - case JFS_SUPERBLOCK_V2: - return 0; - case JFS_SUPERBLOCK_V1: - return journal_convert_superblock_v1(journal, sb); - default: - break; - } - return -EINVAL; -} - -static int journal_convert_superblock_v1(journal_t *journal, - journal_superblock_t *sb) -{ - int offset, blocksize; - struct buffer_head *bh; - - printk(KERN_WARNING - "JBD: Converting superblock from version 1 to 2.\n"); - - /* Pre-initialise new fields to zero */ - offset = ((char *) &(sb->s_feature_compat)) - ((char *) sb); - blocksize = be32_to_cpu(sb->s_blocksize); - memset(&sb->s_feature_compat, 0, blocksize-offset); - - sb->s_nr_users = cpu_to_be32(1); - sb->s_header.h_blocktype = cpu_to_be32(JFS_SUPERBLOCK_V2); - journal->j_format_version = 2; - - bh = journal->j_sb_buffer; - BUFFER_TRACE(bh, "marking dirty"); - mark_buffer_dirty(bh); - sync_dirty_buffer(bh); - return 0; -} - - -/** - * int journal_flush () - Flush journal - * @journal: Journal to act on. - * - * Flush all data for a given journal to disk and empty the journal. - * Filesystems can use this when remounting readonly to ensure that - * recovery does not need to happen on remount. - */ - -int journal_flush(journal_t *journal) -{ - int err = 0; - transaction_t *transaction = NULL; - - spin_lock(&journal->j_state_lock); - - /* Force everything buffered to the log... */ - if (journal->j_running_transaction) { - transaction = journal->j_running_transaction; - __log_start_commit(journal, transaction->t_tid); - } else if (journal->j_committing_transaction) - transaction = journal->j_committing_transaction; - - /* Wait for the log commit to complete... */ - if (transaction) { - tid_t tid = transaction->t_tid; - - spin_unlock(&journal->j_state_lock); - log_wait_commit(journal, tid); - } else { - spin_unlock(&journal->j_state_lock); - } - - /* ...and flush everything in the log out to disk. */ - spin_lock(&journal->j_list_lock); - while (!err && journal->j_checkpoint_transactions != NULL) { - spin_unlock(&journal->j_list_lock); - mutex_lock(&journal->j_checkpoint_mutex); - err = log_do_checkpoint(journal); - mutex_unlock(&journal->j_checkpoint_mutex); - spin_lock(&journal->j_list_lock); - } - spin_unlock(&journal->j_list_lock); - - if (is_journal_aborted(journal)) - return -EIO; - - mutex_lock(&journal->j_checkpoint_mutex); - cleanup_journal_tail(journal); - - /* Finally, mark the journal as really needing no recovery. - * This sets s_start==0 in the underlying superblock, which is - * the magic code for a fully-recovered superblock. Any future - * commits of data to the journal will restore the current - * s_start value. */ - mark_journal_empty(journal); - mutex_unlock(&journal->j_checkpoint_mutex); - spin_lock(&journal->j_state_lock); - J_ASSERT(!journal->j_running_transaction); - J_ASSERT(!journal->j_committing_transaction); - J_ASSERT(!journal->j_checkpoint_transactions); - J_ASSERT(journal->j_head == journal->j_tail); - J_ASSERT(journal->j_tail_sequence == journal->j_transaction_sequence); - spin_unlock(&journal->j_state_lock); - return 0; -} - -/** - * int journal_wipe() - Wipe journal contents - * @journal: Journal to act on. - * @write: flag (see below) - * - * Wipe out all of the contents of a journal, safely. This will produce - * a warning if the journal contains any valid recovery information. - * Must be called between journal_init_*() and journal_load(). - * - * If 'write' is non-zero, then we wipe out the journal on disk; otherwise - * we merely suppress recovery. - */ - -int journal_wipe(journal_t *journal, int write) -{ - int err = 0; - - J_ASSERT (!(journal->j_flags & JFS_LOADED)); - - err = load_superblock(journal); - if (err) - return err; - - if (!journal->j_tail) - goto no_recovery; - - printk (KERN_WARNING "JBD: %s recovery information on journal\n", - write ? "Clearing" : "Ignoring"); - - err = journal_skip_recovery(journal); - if (write) { - /* Lock to make assertions happy... */ - mutex_lock(&journal->j_checkpoint_mutex); - mark_journal_empty(journal); - mutex_unlock(&journal->j_checkpoint_mutex); - } - - no_recovery: - return err; -} - -/* - * journal_dev_name: format a character string to describe on what - * device this journal is present. - */ - -static const char *journal_dev_name(journal_t *journal, char *buffer) -{ - struct block_device *bdev; - - if (journal->j_inode) - bdev = journal->j_inode->i_sb->s_bdev; - else - bdev = journal->j_dev; - - return bdevname(bdev, buffer); -} - -/* - * Journal abort has very specific semantics, which we describe - * for journal abort. - * - * Two internal function, which provide abort to te jbd layer - * itself are here. - */ - -/* - * Quick version for internal journal use (doesn't lock the journal). - * Aborts hard --- we mark the abort as occurred, but do _nothing_ else, - * and don't attempt to make any other journal updates. - */ -static void __journal_abort_hard(journal_t *journal) -{ - transaction_t *transaction; - char b[BDEVNAME_SIZE]; - - if (journal->j_flags & JFS_ABORT) - return; - - printk(KERN_ERR "Aborting journal on device %s.\n", - journal_dev_name(journal, b)); - - spin_lock(&journal->j_state_lock); - journal->j_flags |= JFS_ABORT; - transaction = journal->j_running_transaction; - if (transaction) - __log_start_commit(journal, transaction->t_tid); - spin_unlock(&journal->j_state_lock); -} - -/* Soft abort: record the abort error status in the journal superblock, - * but don't do any other IO. */ -static void __journal_abort_soft (journal_t *journal, int errno) -{ - if (journal->j_flags & JFS_ABORT) - return; - - if (!journal->j_errno) - journal->j_errno = errno; - - __journal_abort_hard(journal); - - if (errno) - journal_update_sb_errno(journal); -} - -/** - * void journal_abort () - Shutdown the journal immediately. - * @journal: the journal to shutdown. - * @errno: an error number to record in the journal indicating - * the reason for the shutdown. - * - * Perform a complete, immediate shutdown of the ENTIRE - * journal (not of a single transaction). This operation cannot be - * undone without closing and reopening the journal. - * - * The journal_abort function is intended to support higher level error - * recovery mechanisms such as the ext2/ext3 remount-readonly error - * mode. - * - * Journal abort has very specific semantics. Any existing dirty, - * unjournaled buffers in the main filesystem will still be written to - * disk by bdflush, but the journaling mechanism will be suspended - * immediately and no further transaction commits will be honoured. - * - * Any dirty, journaled buffers will be written back to disk without - * hitting the journal. Atomicity cannot be guaranteed on an aborted - * filesystem, but we _do_ attempt to leave as much data as possible - * behind for fsck to use for cleanup. - * - * Any attempt to get a new transaction handle on a journal which is in - * ABORT state will just result in an -EROFS error return. A - * journal_stop on an existing handle will return -EIO if we have - * entered abort state during the update. - * - * Recursive transactions are not disturbed by journal abort until the - * final journal_stop, which will receive the -EIO error. - * - * Finally, the journal_abort call allows the caller to supply an errno - * which will be recorded (if possible) in the journal superblock. This - * allows a client to record failure conditions in the middle of a - * transaction without having to complete the transaction to record the - * failure to disk. ext3_error, for example, now uses this - * functionality. - * - * Errors which originate from within the journaling layer will NOT - * supply an errno; a null errno implies that absolutely no further - * writes are done to the journal (unless there are any already in - * progress). - * - */ - -void journal_abort(journal_t *journal, int errno) -{ - __journal_abort_soft(journal, errno); -} - -/** - * int journal_errno () - returns the journal's error state. - * @journal: journal to examine. - * - * This is the errno numbet set with journal_abort(), the last - * time the journal was mounted - if the journal was stopped - * without calling abort this will be 0. - * - * If the journal has been aborted on this mount time -EROFS will - * be returned. - */ -int journal_errno(journal_t *journal) -{ - int err; - - spin_lock(&journal->j_state_lock); - if (journal->j_flags & JFS_ABORT) - err = -EROFS; - else - err = journal->j_errno; - spin_unlock(&journal->j_state_lock); - return err; -} - -/** - * int journal_clear_err () - clears the journal's error state - * @journal: journal to act on. - * - * An error must be cleared or Acked to take a FS out of readonly - * mode. - */ -int journal_clear_err(journal_t *journal) -{ - int err = 0; - - spin_lock(&journal->j_state_lock); - if (journal->j_flags & JFS_ABORT) - err = -EROFS; - else - journal->j_errno = 0; - spin_unlock(&journal->j_state_lock); - return err; -} - -/** - * void journal_ack_err() - Ack journal err. - * @journal: journal to act on. - * - * An error must be cleared or Acked to take a FS out of readonly - * mode. - */ -void journal_ack_err(journal_t *journal) -{ - spin_lock(&journal->j_state_lock); - if (journal->j_errno) - journal->j_flags |= JFS_ACK_ERR; - spin_unlock(&journal->j_state_lock); -} - -int journal_blocks_per_page(struct inode *inode) -{ - return 1 << (PAGE_CACHE_SHIFT - inode->i_sb->s_blocksize_bits); -} - -/* - * Journal_head storage management - */ -static struct kmem_cache *journal_head_cache; -#ifdef CONFIG_JBD_DEBUG -static atomic_t nr_journal_heads = ATOMIC_INIT(0); -#endif - -static int journal_init_journal_head_cache(void) -{ - int retval; - - J_ASSERT(journal_head_cache == NULL); - journal_head_cache = kmem_cache_create("journal_head", - sizeof(struct journal_head), - 0, /* offset */ - SLAB_TEMPORARY, /* flags */ - NULL); /* ctor */ - retval = 0; - if (!journal_head_cache) { - retval = -ENOMEM; - printk(KERN_EMERG "JBD: no memory for journal_head cache\n"); - } - return retval; -} - -static void journal_destroy_journal_head_cache(void) -{ - if (journal_head_cache) { - kmem_cache_destroy(journal_head_cache); - journal_head_cache = NULL; - } -} - -/* - * journal_head splicing and dicing - */ -static struct journal_head *journal_alloc_journal_head(void) -{ - struct journal_head *ret; - -#ifdef CONFIG_JBD_DEBUG - atomic_inc(&nr_journal_heads); -#endif - ret = kmem_cache_zalloc(journal_head_cache, GFP_NOFS); - if (ret == NULL) { - jbd_debug(1, "out of memory for journal_head\n"); - printk_ratelimited(KERN_NOTICE "ENOMEM in %s, retrying.\n", - __func__); - - while (ret == NULL) { - yield(); - ret = kmem_cache_zalloc(journal_head_cache, GFP_NOFS); - } - } - return ret; -} - -static void journal_free_journal_head(struct journal_head *jh) -{ -#ifdef CONFIG_JBD_DEBUG - atomic_dec(&nr_journal_heads); - memset(jh, JBD_POISON_FREE, sizeof(*jh)); -#endif - kmem_cache_free(journal_head_cache, jh); -} - -/* - * A journal_head is attached to a buffer_head whenever JBD has an - * interest in the buffer. - * - * Whenever a buffer has an attached journal_head, its ->b_state:BH_JBD bit - * is set. This bit is tested in core kernel code where we need to take - * JBD-specific actions. Testing the zeroness of ->b_private is not reliable - * there. - * - * When a buffer has its BH_JBD bit set, its ->b_count is elevated by one. - * - * When a buffer has its BH_JBD bit set it is immune from being released by - * core kernel code, mainly via ->b_count. - * - * A journal_head is detached from its buffer_head when the journal_head's - * b_jcount reaches zero. Running transaction (b_transaction) and checkpoint - * transaction (b_cp_transaction) hold their references to b_jcount. - * - * Various places in the kernel want to attach a journal_head to a buffer_head - * _before_ attaching the journal_head to a transaction. To protect the - * journal_head in this situation, journal_add_journal_head elevates the - * journal_head's b_jcount refcount by one. The caller must call - * journal_put_journal_head() to undo this. - * - * So the typical usage would be: - * - * (Attach a journal_head if needed. Increments b_jcount) - * struct journal_head *jh = journal_add_journal_head(bh); - * ... - * (Get another reference for transaction) - * journal_grab_journal_head(bh); - * jh->b_transaction = xxx; - * (Put original reference) - * journal_put_journal_head(jh); - */ - -/* - * Give a buffer_head a journal_head. - * - * May sleep. - */ -struct journal_head *journal_add_journal_head(struct buffer_head *bh) -{ - struct journal_head *jh; - struct journal_head *new_jh = NULL; - -repeat: - if (!buffer_jbd(bh)) - new_jh = journal_alloc_journal_head(); - - jbd_lock_bh_journal_head(bh); - if (buffer_jbd(bh)) { - jh = bh2jh(bh); - } else { - J_ASSERT_BH(bh, - (atomic_read(&bh->b_count) > 0) || - (bh->b_page && bh->b_page->mapping)); - - if (!new_jh) { - jbd_unlock_bh_journal_head(bh); - goto repeat; - } - - jh = new_jh; - new_jh = NULL; /* We consumed it */ - set_buffer_jbd(bh); - bh->b_private = jh; - jh->b_bh = bh; - get_bh(bh); - BUFFER_TRACE(bh, "added journal_head"); - } - jh->b_jcount++; - jbd_unlock_bh_journal_head(bh); - if (new_jh) - journal_free_journal_head(new_jh); - return bh->b_private; -} - -/* - * Grab a ref against this buffer_head's journal_head. If it ended up not - * having a journal_head, return NULL - */ -struct journal_head *journal_grab_journal_head(struct buffer_head *bh) -{ - struct journal_head *jh = NULL; - - jbd_lock_bh_journal_head(bh); - if (buffer_jbd(bh)) { - jh = bh2jh(bh); - jh->b_jcount++; - } - jbd_unlock_bh_journal_head(bh); - return jh; -} - -static void __journal_remove_journal_head(struct buffer_head *bh) -{ - struct journal_head *jh = bh2jh(bh); - - J_ASSERT_JH(jh, jh->b_jcount >= 0); - J_ASSERT_JH(jh, jh->b_transaction == NULL); - J_ASSERT_JH(jh, jh->b_next_transaction == NULL); - J_ASSERT_JH(jh, jh->b_cp_transaction == NULL); - J_ASSERT_JH(jh, jh->b_jlist == BJ_None); - J_ASSERT_BH(bh, buffer_jbd(bh)); - J_ASSERT_BH(bh, jh2bh(jh) == bh); - BUFFER_TRACE(bh, "remove journal_head"); - if (jh->b_frozen_data) { - printk(KERN_WARNING "%s: freeing b_frozen_data\n", __func__); - jbd_free(jh->b_frozen_data, bh->b_size); - } - if (jh->b_committed_data) { - printk(KERN_WARNING "%s: freeing b_committed_data\n", __func__); - jbd_free(jh->b_committed_data, bh->b_size); - } - bh->b_private = NULL; - jh->b_bh = NULL; /* debug, really */ - clear_buffer_jbd(bh); - journal_free_journal_head(jh); -} - -/* - * Drop a reference on the passed journal_head. If it fell to zero then - * release the journal_head from the buffer_head. - */ -void journal_put_journal_head(struct journal_head *jh) -{ - struct buffer_head *bh = jh2bh(jh); - - jbd_lock_bh_journal_head(bh); - J_ASSERT_JH(jh, jh->b_jcount > 0); - --jh->b_jcount; - if (!jh->b_jcount) { - __journal_remove_journal_head(bh); - jbd_unlock_bh_journal_head(bh); - __brelse(bh); - } else - jbd_unlock_bh_journal_head(bh); -} - -/* - * debugfs tunables - */ -#ifdef CONFIG_JBD_DEBUG - -u8 journal_enable_debug __read_mostly; -EXPORT_SYMBOL(journal_enable_debug); - -static struct dentry *jbd_debugfs_dir; -static struct dentry *jbd_debug; - -static void __init jbd_create_debugfs_entry(void) -{ - jbd_debugfs_dir = debugfs_create_dir("jbd", NULL); - if (jbd_debugfs_dir) - jbd_debug = debugfs_create_u8("jbd-debug", S_IRUGO | S_IWUSR, - jbd_debugfs_dir, - &journal_enable_debug); -} - -static void __exit jbd_remove_debugfs_entry(void) -{ - debugfs_remove(jbd_debug); - debugfs_remove(jbd_debugfs_dir); -} - -#else - -static inline void jbd_create_debugfs_entry(void) -{ -} - -static inline void jbd_remove_debugfs_entry(void) -{ -} - -#endif - -struct kmem_cache *jbd_handle_cache; - -static int __init journal_init_handle_cache(void) -{ - jbd_handle_cache = kmem_cache_create("journal_handle", - sizeof(handle_t), - 0, /* offset */ - SLAB_TEMPORARY, /* flags */ - NULL); /* ctor */ - if (jbd_handle_cache == NULL) { - printk(KERN_EMERG "JBD: failed to create handle cache\n"); - return -ENOMEM; - } - return 0; -} - -static void journal_destroy_handle_cache(void) -{ - if (jbd_handle_cache) - kmem_cache_destroy(jbd_handle_cache); -} - -/* - * Module startup and shutdown - */ - -static int __init journal_init_caches(void) -{ - int ret; - - ret = journal_init_revoke_caches(); - if (ret == 0) - ret = journal_init_journal_head_cache(); - if (ret == 0) - ret = journal_init_handle_cache(); - return ret; -} - -static void journal_destroy_caches(void) -{ - journal_destroy_revoke_caches(); - journal_destroy_journal_head_cache(); - journal_destroy_handle_cache(); -} - -static int __init journal_init(void) -{ - int ret; - - BUILD_BUG_ON(sizeof(struct journal_superblock_s) != 1024); - - ret = journal_init_caches(); - if (ret != 0) - journal_destroy_caches(); - jbd_create_debugfs_entry(); - return ret; -} - -static void __exit journal_exit(void) -{ -#ifdef CONFIG_JBD_DEBUG - int n = atomic_read(&nr_journal_heads); - if (n) - printk(KERN_ERR "JBD: leaked %d journal_heads!\n", n); -#endif - jbd_remove_debugfs_entry(); - journal_destroy_caches(); -} - -MODULE_LICENSE("GPL"); -module_init(journal_init); -module_exit(journal_exit); - diff --git a/fs/jbd/recovery.c b/fs/jbd/recovery.c deleted file mode 100644 index a748fe2..0000000 --- a/fs/jbd/recovery.c +++ /dev/null @@ -1,594 +0,0 @@ -/* - * linux/fs/jbd/recovery.c - * - * Written by Stephen C. Tweedie <sct@redhat.com>, 1999 - * - * Copyright 1999-2000 Red Hat Software --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Journal recovery routines for the generic filesystem journaling code; - * part of the ext2fs journaling system. - */ - -#ifndef __KERNEL__ -#include "jfs_user.h" -#else -#include <linux/time.h> -#include <linux/fs.h> -#include <linux/jbd.h> -#include <linux/errno.h> -#include <linux/blkdev.h> -#endif - -/* - * Maintain information about the progress of the recovery job, so that - * the different passes can carry information between them. - */ -struct recovery_info -{ - tid_t start_transaction; - tid_t end_transaction; - - int nr_replays; - int nr_revokes; - int nr_revoke_hits; -}; - -enum passtype {PASS_SCAN, PASS_REVOKE, PASS_REPLAY}; -static int do_one_pass(journal_t *journal, - struct recovery_info *info, enum passtype pass); -static int scan_revoke_records(journal_t *, struct buffer_head *, - tid_t, struct recovery_info *); - -#ifdef __KERNEL__ - -/* Release readahead buffers after use */ -static void journal_brelse_array(struct buffer_head *b[], int n) -{ - while (--n >= 0) - brelse (b[n]); -} - - -/* - * When reading from the journal, we are going through the block device - * layer directly and so there is no readahead being done for us. We - * need to implement any readahead ourselves if we want it to happen at - * all. Recovery is basically one long sequential read, so make sure we - * do the IO in reasonably large chunks. - * - * This is not so critical that we need to be enormously clever about - * the readahead size, though. 128K is a purely arbitrary, good-enough - * fixed value. - */ - -#define MAXBUF 8 -static int do_readahead(journal_t *journal, unsigned int start) -{ - int err; - unsigned int max, nbufs, next; - unsigned int blocknr; - struct buffer_head *bh; - - struct buffer_head * bufs[MAXBUF]; - - /* Do up to 128K of readahead */ - max = start + (128 * 1024 / journal->j_blocksize); - if (max > journal->j_maxlen) - max = journal->j_maxlen; - - /* Do the readahead itself. We'll submit MAXBUF buffer_heads at - * a time to the block device IO layer. */ - - nbufs = 0; - - for (next = start; next < max; next++) { - err = journal_bmap(journal, next, &blocknr); - - if (err) { - printk (KERN_ERR "JBD: bad block at offset %u\n", - next); - goto failed; - } - - bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize); - if (!bh) { - err = -ENOMEM; - goto failed; - } - - if (!buffer_uptodate(bh) && !buffer_locked(bh)) { - bufs[nbufs++] = bh; - if (nbufs == MAXBUF) { - ll_rw_block(READ, nbufs, bufs); - journal_brelse_array(bufs, nbufs); - nbufs = 0; - } - } else - brelse(bh); - } - - if (nbufs) - ll_rw_block(READ, nbufs, bufs); - err = 0; - -failed: - if (nbufs) - journal_brelse_array(bufs, nbufs); - return err; -} - -#endif /* __KERNEL__ */ - - -/* - * Read a block from the journal - */ - -static int jread(struct buffer_head **bhp, journal_t *journal, - unsigned int offset) -{ - int err; - unsigned int blocknr; - struct buffer_head *bh; - - *bhp = NULL; - - if (offset >= journal->j_maxlen) { - printk(KERN_ERR "JBD: corrupted journal superblock\n"); - return -EIO; - } - - err = journal_bmap(journal, offset, &blocknr); - - if (err) { - printk (KERN_ERR "JBD: bad block at offset %u\n", - offset); - return err; - } - - bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize); - if (!bh) - return -ENOMEM; - - if (!buffer_uptodate(bh)) { - /* If this is a brand new buffer, start readahead. - Otherwise, we assume we are already reading it. */ - if (!buffer_req(bh)) - do_readahead(journal, offset); - wait_on_buffer(bh); - } - - if (!buffer_uptodate(bh)) { - printk (KERN_ERR "JBD: Failed to read block at offset %u\n", - offset); - brelse(bh); - return -EIO; - } - - *bhp = bh; - return 0; -} - - -/* - * Count the number of in-use tags in a journal descriptor block. - */ - -static int count_tags(struct buffer_head *bh, int size) -{ - char * tagp; - journal_block_tag_t * tag; - int nr = 0; - - tagp = &bh->b_data[sizeof(journal_header_t)]; - - while ((tagp - bh->b_data + sizeof(journal_block_tag_t)) <= size) { - tag = (journal_block_tag_t *) tagp; - - nr++; - tagp += sizeof(journal_block_tag_t); - if (!(tag->t_flags & cpu_to_be32(JFS_FLAG_SAME_UUID))) - tagp += 16; - - if (tag->t_flags & cpu_to_be32(JFS_FLAG_LAST_TAG)) - break; - } - - return nr; -} - - -/* Make sure we wrap around the log correctly! */ -#define wrap(journal, var) \ -do { \ - if (var >= (journal)->j_last) \ - var -= ((journal)->j_last - (journal)->j_first); \ -} while (0) - -/** - * journal_recover - recovers a on-disk journal - * @journal: the journal to recover - * - * The primary function for recovering the log contents when mounting a - * journaled device. - * - * Recovery is done in three passes. In the first pass, we look for the - * end of the log. In the second, we assemble the list of revoke - * blocks. In the third and final pass, we replay any un-revoked blocks - * in the log. - */ -int journal_recover(journal_t *journal) -{ - int err, err2; - journal_superblock_t * sb; - - struct recovery_info info; - - memset(&info, 0, sizeof(info)); - sb = journal->j_superblock; - - /* - * The journal superblock's s_start field (the current log head) - * is always zero if, and only if, the journal was cleanly - * unmounted. - */ - - if (!sb->s_start) { - jbd_debug(1, "No recovery required, last transaction %d\n", - be32_to_cpu(sb->s_sequence)); - journal->j_transaction_sequence = be32_to_cpu(sb->s_sequence) + 1; - return 0; - } - - err = do_one_pass(journal, &info, PASS_SCAN); - if (!err) - err = do_one_pass(journal, &info, PASS_REVOKE); - if (!err) - err = do_one_pass(journal, &info, PASS_REPLAY); - - jbd_debug(1, "JBD: recovery, exit status %d, " - "recovered transactions %u to %u\n", - err, info.start_transaction, info.end_transaction); - jbd_debug(1, "JBD: Replayed %d and revoked %d/%d blocks\n", - info.nr_replays, info.nr_revoke_hits, info.nr_revokes); - - /* Restart the log at the next transaction ID, thus invalidating - * any existing commit records in the log. */ - journal->j_transaction_sequence = ++info.end_transaction; - - journal_clear_revoke(journal); - err2 = sync_blockdev(journal->j_fs_dev); - if (!err) - err = err2; - /* Flush disk caches to get replayed data on the permanent storage */ - if (journal->j_flags & JFS_BARRIER) { - err2 = blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL); - if (!err) - err = err2; - } - - return err; -} - -/** - * journal_skip_recovery - Start journal and wipe exiting records - * @journal: journal to startup - * - * Locate any valid recovery information from the journal and set up the - * journal structures in memory to ignore it (presumably because the - * caller has evidence that it is out of date). - * This function does'nt appear to be exorted.. - * - * We perform one pass over the journal to allow us to tell the user how - * much recovery information is being erased, and to let us initialise - * the journal transaction sequence numbers to the next unused ID. - */ -int journal_skip_recovery(journal_t *journal) -{ - int err; - struct recovery_info info; - - memset (&info, 0, sizeof(info)); - - err = do_one_pass(journal, &info, PASS_SCAN); - - if (err) { - printk(KERN_ERR "JBD: error %d scanning journal\n", err); - ++journal->j_transaction_sequence; - } else { -#ifdef CONFIG_JBD_DEBUG - int dropped = info.end_transaction - - be32_to_cpu(journal->j_superblock->s_sequence); - jbd_debug(1, - "JBD: ignoring %d transaction%s from the journal.\n", - dropped, (dropped == 1) ? "" : "s"); -#endif - journal->j_transaction_sequence = ++info.end_transaction; - } - - journal->j_tail = 0; - return err; -} - -static int do_one_pass(journal_t *journal, - struct recovery_info *info, enum passtype pass) -{ - unsigned int first_commit_ID, next_commit_ID; - unsigned int next_log_block; - int err, success = 0; - journal_superblock_t * sb; - journal_header_t * tmp; - struct buffer_head * bh; - unsigned int sequence; - int blocktype; - - /* - * First thing is to establish what we expect to find in the log - * (in terms of transaction IDs), and where (in terms of log - * block offsets): query the superblock. - */ - - sb = journal->j_superblock; - next_commit_ID = be32_to_cpu(sb->s_sequence); - next_log_block = be32_to_cpu(sb->s_start); - - first_commit_ID = next_commit_ID; - if (pass == PASS_SCAN) - info->start_transaction = first_commit_ID; - - jbd_debug(1, "Starting recovery pass %d\n", pass); - - /* - * Now we walk through the log, transaction by transaction, - * making sure that each transaction has a commit block in the - * expected place. Each complete transaction gets replayed back - * into the main filesystem. - */ - - while (1) { - int flags; - char * tagp; - journal_block_tag_t * tag; - struct buffer_head * obh; - struct buffer_head * nbh; - - cond_resched(); - - /* If we already know where to stop the log traversal, - * check right now that we haven't gone past the end of - * the log. */ - - if (pass != PASS_SCAN) - if (tid_geq(next_commit_ID, info->end_transaction)) - break; - - jbd_debug(2, "Scanning for sequence ID %u at %u/%u\n", - next_commit_ID, next_log_block, journal->j_last); - - /* Skip over each chunk of the transaction looking - * either the next descriptor block or the final commit - * record. */ - - jbd_debug(3, "JBD: checking block %u\n", next_log_block); - err = jread(&bh, journal, next_log_block); - if (err) - goto failed; - - next_log_block++; - wrap(journal, next_log_block); - - /* What kind of buffer is it? - * - * If it is a descriptor block, check that it has the - * expected sequence number. Otherwise, we're all done - * here. */ - - tmp = (journal_header_t *)bh->b_data; - - if (tmp->h_magic != cpu_to_be32(JFS_MAGIC_NUMBER)) { - brelse(bh); - break; - } - - blocktype = be32_to_cpu(tmp->h_blocktype); - sequence = be32_to_cpu(tmp->h_sequence); - jbd_debug(3, "Found magic %d, sequence %d\n", - blocktype, sequence); - - if (sequence != next_commit_ID) { - brelse(bh); - break; - } - - /* OK, we have a valid descriptor block which matches - * all of the sequence number checks. What are we going - * to do with it? That depends on the pass... */ - - switch(blocktype) { - case JFS_DESCRIPTOR_BLOCK: - /* If it is a valid descriptor block, replay it - * in pass REPLAY; otherwise, just skip over the - * blocks it describes. */ - if (pass != PASS_REPLAY) { - next_log_block += - count_tags(bh, journal->j_blocksize); - wrap(journal, next_log_block); - brelse(bh); - continue; - } - - /* A descriptor block: we can now write all of - * the data blocks. Yay, useful work is finally - * getting done here! */ - - tagp = &bh->b_data[sizeof(journal_header_t)]; - while ((tagp - bh->b_data +sizeof(journal_block_tag_t)) - <= journal->j_blocksize) { - unsigned int io_block; - - tag = (journal_block_tag_t *) tagp; - flags = be32_to_cpu(tag->t_flags); - - io_block = next_log_block++; - wrap(journal, next_log_block); - err = jread(&obh, journal, io_block); - if (err) { - /* Recover what we can, but - * report failure at the end. */ - success = err; - printk (KERN_ERR - "JBD: IO error %d recovering " - "block %u in log\n", - err, io_block); - } else { - unsigned int blocknr; - - J_ASSERT(obh != NULL); - blocknr = be32_to_cpu(tag->t_blocknr); - - /* If the block has been - * revoked, then we're all done - * here. */ - if (journal_test_revoke - (journal, blocknr, - next_commit_ID)) { - brelse(obh); - ++info->nr_revoke_hits; - goto skip_write; - } - - /* Find a buffer for the new - * data being restored */ - nbh = __getblk(journal->j_fs_dev, - blocknr, - journal->j_blocksize); - if (nbh == NULL) { - printk(KERN_ERR - "JBD: Out of memory " - "during recovery.\n"); - err = -ENOMEM; - brelse(bh); - brelse(obh); - goto failed; - } - - lock_buffer(nbh); - memcpy(nbh->b_data, obh->b_data, - journal->j_blocksize); - if (flags & JFS_FLAG_ESCAPE) { - *((__be32 *)nbh->b_data) = - cpu_to_be32(JFS_MAGIC_NUMBER); - } - - BUFFER_TRACE(nbh, "marking dirty"); - set_buffer_uptodate(nbh); - mark_buffer_dirty(nbh); - BUFFER_TRACE(nbh, "marking uptodate"); - ++info->nr_replays; - /* ll_rw_block(WRITE, 1, &nbh); */ - unlock_buffer(nbh); - brelse(obh); - brelse(nbh); - } - - skip_write: - tagp += sizeof(journal_block_tag_t); - if (!(flags & JFS_FLAG_SAME_UUID)) - tagp += 16; - - if (flags & JFS_FLAG_LAST_TAG) - break; - } - - brelse(bh); - continue; - - case JFS_COMMIT_BLOCK: - /* Found an expected commit block: not much to - * do other than move on to the next sequence - * number. */ - brelse(bh); - next_commit_ID++; - continue; - - case JFS_REVOKE_BLOCK: - /* If we aren't in the REVOKE pass, then we can - * just skip over this block. */ - if (pass != PASS_REVOKE) { - brelse(bh); - continue; - } - - err = scan_revoke_records(journal, bh, - next_commit_ID, info); - brelse(bh); - if (err) - goto failed; - continue; - - default: - jbd_debug(3, "Unrecognised magic %d, end of scan.\n", - blocktype); - brelse(bh); - goto done; - } - } - - done: - /* - * We broke out of the log scan loop: either we came to the - * known end of the log or we found an unexpected block in the - * log. If the latter happened, then we know that the "current" - * transaction marks the end of the valid log. - */ - - if (pass == PASS_SCAN) - info->end_transaction = next_commit_ID; - else { - /* It's really bad news if different passes end up at - * different places (but possible due to IO errors). */ - if (info->end_transaction != next_commit_ID) { - printk (KERN_ERR "JBD: recovery pass %d ended at " - "transaction %u, expected %u\n", - pass, next_commit_ID, info->end_transaction); - if (!success) - success = -EIO; - } - } - - return success; - - failed: - return err; -} - - -/* Scan a revoke record, marking all blocks mentioned as revoked. */ - -static int scan_revoke_records(journal_t *journal, struct buffer_head *bh, - tid_t sequence, struct recovery_info *info) -{ - journal_revoke_header_t *header; - int offset, max; - - header = (journal_revoke_header_t *) bh->b_data; - offset = sizeof(journal_revoke_header_t); - max = be32_to_cpu(header->r_count); - - while (offset < max) { - unsigned int blocknr; - int err; - - blocknr = be32_to_cpu(* ((__be32 *) (bh->b_data+offset))); - offset += 4; - err = journal_set_revoke(journal, blocknr, sequence); - if (err) - return err; - ++info->nr_revokes; - } - return 0; -} diff --git a/fs/jbd/revoke.c b/fs/jbd/revoke.c deleted file mode 100644 index dcead63..0000000 --- a/fs/jbd/revoke.c +++ /dev/null @@ -1,733 +0,0 @@ -/* - * linux/fs/jbd/revoke.c - * - * Written by Stephen C. Tweedie <sct@redhat.com>, 2000 - * - * Copyright 2000 Red Hat corp --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Journal revoke routines for the generic filesystem journaling code; - * part of the ext2fs journaling system. - * - * Revoke is the mechanism used to prevent old log records for deleted - * metadata from being replayed on top of newer data using the same - * blocks. The revoke mechanism is used in two separate places: - * - * + Commit: during commit we write the entire list of the current - * transaction's revoked blocks to the journal - * - * + Recovery: during recovery we record the transaction ID of all - * revoked blocks. If there are multiple revoke records in the log - * for a single block, only the last one counts, and if there is a log - * entry for a block beyond the last revoke, then that log entry still - * gets replayed. - * - * We can get interactions between revokes and new log data within a - * single transaction: - * - * Block is revoked and then journaled: - * The desired end result is the journaling of the new block, so we - * cancel the revoke before the transaction commits. - * - * Block is journaled and then revoked: - * The revoke must take precedence over the write of the block, so we - * need either to cancel the journal entry or to write the revoke - * later in the log than the log block. In this case, we choose the - * latter: journaling a block cancels any revoke record for that block - * in the current transaction, so any revoke for that block in the - * transaction must have happened after the block was journaled and so - * the revoke must take precedence. - * - * Block is revoked and then written as data: - * The data write is allowed to succeed, but the revoke is _not_ - * cancelled. We still need to prevent old log records from - * overwriting the new data. We don't even need to clear the revoke - * bit here. - * - * We cache revoke status of a buffer in the current transaction in b_states - * bits. As the name says, revokevalid flag indicates that the cached revoke - * status of a buffer is valid and we can rely on the cached status. - * - * Revoke information on buffers is a tri-state value: - * - * RevokeValid clear: no cached revoke status, need to look it up - * RevokeValid set, Revoked clear: - * buffer has not been revoked, and cancel_revoke - * need do nothing. - * RevokeValid set, Revoked set: - * buffer has been revoked. - * - * Locking rules: - * We keep two hash tables of revoke records. One hashtable belongs to the - * running transaction (is pointed to by journal->j_revoke), the other one - * belongs to the committing transaction. Accesses to the second hash table - * happen only from the kjournald and no other thread touches this table. Also - * journal_switch_revoke_table() which switches which hashtable belongs to the - * running and which to the committing transaction is called only from - * kjournald. Therefore we need no locks when accessing the hashtable belonging - * to the committing transaction. - * - * All users operating on the hash table belonging to the running transaction - * have a handle to the transaction. Therefore they are safe from kjournald - * switching hash tables under them. For operations on the lists of entries in - * the hash table j_revoke_lock is used. - * - * Finally, also replay code uses the hash tables but at this moment no one else - * can touch them (filesystem isn't mounted yet) and hence no locking is - * needed. - */ - -#ifndef __KERNEL__ -#include "jfs_user.h" -#else -#include <linux/time.h> -#include <linux/fs.h> -#include <linux/jbd.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/list.h> -#include <linux/init.h> -#include <linux/bio.h> -#endif -#include <linux/log2.h> -#include <linux/hash.h> - -static struct kmem_cache *revoke_record_cache; -static struct kmem_cache *revoke_table_cache; - -/* Each revoke record represents one single revoked block. During - journal replay, this involves recording the transaction ID of the - last transaction to revoke this block. */ - -struct jbd_revoke_record_s -{ - struct list_head hash; - tid_t sequence; /* Used for recovery only */ - unsigned int blocknr; -}; - - -/* The revoke table is just a simple hash table of revoke records. */ -struct jbd_revoke_table_s -{ - /* It is conceivable that we might want a larger hash table - * for recovery. Must be a power of two. */ - int hash_size; - int hash_shift; - struct list_head *hash_table; -}; - - -#ifdef __KERNEL__ -static void write_one_revoke_record(journal_t *, transaction_t *, - struct journal_head **, int *, - struct jbd_revoke_record_s *, int); -static void flush_descriptor(journal_t *, struct journal_head *, int, int); -#endif - -/* Utility functions to maintain the revoke table */ - -static inline int hash(journal_t *journal, unsigned int block) -{ - struct jbd_revoke_table_s *table = journal->j_revoke; - - return hash_32(block, table->hash_shift); -} - -static int insert_revoke_hash(journal_t *journal, unsigned int blocknr, - tid_t seq) -{ - struct list_head *hash_list; - struct jbd_revoke_record_s *record; - -repeat: - record = kmem_cache_alloc(revoke_record_cache, GFP_NOFS); - if (!record) - goto oom; - - record->sequence = seq; - record->blocknr = blocknr; - hash_list = &journal->j_revoke->hash_table[hash(journal, blocknr)]; - spin_lock(&journal->j_revoke_lock); - list_add(&record->hash, hash_list); - spin_unlock(&journal->j_revoke_lock); - return 0; - -oom: - if (!journal_oom_retry) - return -ENOMEM; - jbd_debug(1, "ENOMEM in %s, retrying\n", __func__); - yield(); - goto repeat; -} - -/* Find a revoke record in the journal's hash table. */ - -static struct jbd_revoke_record_s *find_revoke_record(journal_t *journal, - unsigned int blocknr) -{ - struct list_head *hash_list; - struct jbd_revoke_record_s *record; - - hash_list = &journal->j_revoke->hash_table[hash(journal, blocknr)]; - - spin_lock(&journal->j_revoke_lock); - record = (struct jbd_revoke_record_s *) hash_list->next; - while (&(record->hash) != hash_list) { - if (record->blocknr == blocknr) { - spin_unlock(&journal->j_revoke_lock); - return record; - } - record = (struct jbd_revoke_record_s *) record->hash.next; - } - spin_unlock(&journal->j_revoke_lock); - return NULL; -} - -void journal_destroy_revoke_caches(void) -{ - if (revoke_record_cache) { - kmem_cache_destroy(revoke_record_cache); - revoke_record_cache = NULL; - } - if (revoke_table_cache) { - kmem_cache_destroy(revoke_table_cache); - revoke_table_cache = NULL; - } -} - -int __init journal_init_revoke_caches(void) -{ - J_ASSERT(!revoke_record_cache); - J_ASSERT(!revoke_table_cache); - - revoke_record_cache = kmem_cache_create("revoke_record", - sizeof(struct jbd_revoke_record_s), - 0, - SLAB_HWCACHE_ALIGN|SLAB_TEMPORARY, - NULL); - if (!revoke_record_cache) - goto record_cache_failure; - - revoke_table_cache = kmem_cache_create("revoke_table", - sizeof(struct jbd_revoke_table_s), - 0, SLAB_TEMPORARY, NULL); - if (!revoke_table_cache) - goto table_cache_failure; - - return 0; - -table_cache_failure: - journal_destroy_revoke_caches(); -record_cache_failure: - return -ENOMEM; -} - -static struct jbd_revoke_table_s *journal_init_revoke_table(int hash_size) -{ - int i; - struct jbd_revoke_table_s *table; - - table = kmem_cache_alloc(revoke_table_cache, GFP_KERNEL); - if (!table) - goto out; - - table->hash_size = hash_size; - table->hash_shift = ilog2(hash_size); - table->hash_table = - kmalloc(hash_size * sizeof(struct list_head), GFP_KERNEL); - if (!table->hash_table) { - kmem_cache_free(revoke_table_cache, table); - table = NULL; - goto out; - } - - for (i = 0; i < hash_size; i++) - INIT_LIST_HEAD(&table->hash_table[i]); - -out: - return table; -} - -static void journal_destroy_revoke_table(struct jbd_revoke_table_s *table) -{ - int i; - struct list_head *hash_list; - - for (i = 0; i < table->hash_size; i++) { - hash_list = &table->hash_table[i]; - J_ASSERT(list_empty(hash_list)); - } - - kfree(table->hash_table); - kmem_cache_free(revoke_table_cache, table); -} - -/* Initialise the revoke table for a given journal to a given size. */ -int journal_init_revoke(journal_t *journal, int hash_size) -{ - J_ASSERT(journal->j_revoke_table[0] == NULL); - J_ASSERT(is_power_of_2(hash_size)); - - journal->j_revoke_table[0] = journal_init_revoke_table(hash_size); - if (!journal->j_revoke_table[0]) - goto fail0; - - journal->j_revoke_table[1] = journal_init_revoke_table(hash_size); - if (!journal->j_revoke_table[1]) - goto fail1; - - journal->j_revoke = journal->j_revoke_table[1]; - - spin_lock_init(&journal->j_revoke_lock); - - return 0; - -fail1: - journal_destroy_revoke_table(journal->j_revoke_table[0]); -fail0: - return -ENOMEM; -} - -/* Destroy a journal's revoke table. The table must already be empty! */ -void journal_destroy_revoke(journal_t *journal) -{ - journal->j_revoke = NULL; - if (journal->j_revoke_table[0]) - journal_destroy_revoke_table(journal->j_revoke_table[0]); - if (journal->j_revoke_table[1]) - journal_destroy_revoke_table(journal->j_revoke_table[1]); -} - - -#ifdef __KERNEL__ - -/* - * journal_revoke: revoke a given buffer_head from the journal. This - * prevents the block from being replayed during recovery if we take a - * crash after this current transaction commits. Any subsequent - * metadata writes of the buffer in this transaction cancel the - * revoke. - * - * Note that this call may block --- it is up to the caller to make - * sure that there are no further calls to journal_write_metadata - * before the revoke is complete. In ext3, this implies calling the - * revoke before clearing the block bitmap when we are deleting - * metadata. - * - * Revoke performs a journal_forget on any buffer_head passed in as a - * parameter, but does _not_ forget the buffer_head if the bh was only - * found implicitly. - * - * bh_in may not be a journalled buffer - it may have come off - * the hash tables without an attached journal_head. - * - * If bh_in is non-zero, journal_revoke() will decrement its b_count - * by one. - */ - -int journal_revoke(handle_t *handle, unsigned int blocknr, - struct buffer_head *bh_in) -{ - struct buffer_head *bh = NULL; - journal_t *journal; - struct block_device *bdev; - int err; - - might_sleep(); - if (bh_in) - BUFFER_TRACE(bh_in, "enter"); - - journal = handle->h_transaction->t_journal; - if (!journal_set_features(journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE)){ - J_ASSERT (!"Cannot set revoke feature!"); - return -EINVAL; - } - - bdev = journal->j_fs_dev; - bh = bh_in; - - if (!bh) { - bh = __find_get_block(bdev, blocknr, journal->j_blocksize); - if (bh) - BUFFER_TRACE(bh, "found on hash"); - } -#ifdef JBD_EXPENSIVE_CHECKING - else { - struct buffer_head *bh2; - - /* If there is a different buffer_head lying around in - * memory anywhere... */ - bh2 = __find_get_block(bdev, blocknr, journal->j_blocksize); - if (bh2) { - /* ... and it has RevokeValid status... */ - if (bh2 != bh && buffer_revokevalid(bh2)) - /* ...then it better be revoked too, - * since it's illegal to create a revoke - * record against a buffer_head which is - * not marked revoked --- that would - * risk missing a subsequent revoke - * cancel. */ - J_ASSERT_BH(bh2, buffer_revoked(bh2)); - put_bh(bh2); - } - } -#endif - - /* We really ought not ever to revoke twice in a row without - first having the revoke cancelled: it's illegal to free a - block twice without allocating it in between! */ - if (bh) { - if (!J_EXPECT_BH(bh, !buffer_revoked(bh), - "inconsistent data on disk")) { - if (!bh_in) - brelse(bh); - return -EIO; - } - set_buffer_revoked(bh); - set_buffer_revokevalid(bh); - if (bh_in) { - BUFFER_TRACE(bh_in, "call journal_forget"); - journal_forget(handle, bh_in); - } else { - BUFFER_TRACE(bh, "call brelse"); - __brelse(bh); - } - } - - jbd_debug(2, "insert revoke for block %u, bh_in=%p\n", blocknr, bh_in); - err = insert_revoke_hash(journal, blocknr, - handle->h_transaction->t_tid); - BUFFER_TRACE(bh_in, "exit"); - return err; -} - -/* - * Cancel an outstanding revoke. For use only internally by the - * journaling code (called from journal_get_write_access). - * - * We trust buffer_revoked() on the buffer if the buffer is already - * being journaled: if there is no revoke pending on the buffer, then we - * don't do anything here. - * - * This would break if it were possible for a buffer to be revoked and - * discarded, and then reallocated within the same transaction. In such - * a case we would have lost the revoked bit, but when we arrived here - * the second time we would still have a pending revoke to cancel. So, - * do not trust the Revoked bit on buffers unless RevokeValid is also - * set. - */ -int journal_cancel_revoke(handle_t *handle, struct journal_head *jh) -{ - struct jbd_revoke_record_s *record; - journal_t *journal = handle->h_transaction->t_journal; - int need_cancel; - int did_revoke = 0; /* akpm: debug */ - struct buffer_head *bh = jh2bh(jh); - - jbd_debug(4, "journal_head %p, cancelling revoke\n", jh); - - /* Is the existing Revoke bit valid? If so, we trust it, and - * only perform the full cancel if the revoke bit is set. If - * not, we can't trust the revoke bit, and we need to do the - * full search for a revoke record. */ - if (test_set_buffer_revokevalid(bh)) { - need_cancel = test_clear_buffer_revoked(bh); - } else { - need_cancel = 1; - clear_buffer_revoked(bh); - } - - if (need_cancel) { - record = find_revoke_record(journal, bh->b_blocknr); - if (record) { - jbd_debug(4, "cancelled existing revoke on " - "blocknr %llu\n", (unsigned long long)bh->b_blocknr); - spin_lock(&journal->j_revoke_lock); - list_del(&record->hash); - spin_unlock(&journal->j_revoke_lock); - kmem_cache_free(revoke_record_cache, record); - did_revoke = 1; - } - } - -#ifdef JBD_EXPENSIVE_CHECKING - /* There better not be one left behind by now! */ - record = find_revoke_record(journal, bh->b_blocknr); - J_ASSERT_JH(jh, record == NULL); -#endif - - /* Finally, have we just cleared revoke on an unhashed - * buffer_head? If so, we'd better make sure we clear the - * revoked status on any hashed alias too, otherwise the revoke - * state machine will get very upset later on. */ - if (need_cancel) { - struct buffer_head *bh2; - bh2 = __find_get_block(bh->b_bdev, bh->b_blocknr, bh->b_size); - if (bh2) { - if (bh2 != bh) - clear_buffer_revoked(bh2); - __brelse(bh2); - } - } - return did_revoke; -} - -/* - * journal_clear_revoked_flags clears revoked flag of buffers in - * revoke table to reflect there is no revoked buffer in the next - * transaction which is going to be started. - */ -void journal_clear_buffer_revoked_flags(journal_t *journal) -{ - struct jbd_revoke_table_s *revoke = journal->j_revoke; - int i = 0; - - for (i = 0; i < revoke->hash_size; i++) { - struct list_head *hash_list; - struct list_head *list_entry; - hash_list = &revoke->hash_table[i]; - - list_for_each(list_entry, hash_list) { - struct jbd_revoke_record_s *record; - struct buffer_head *bh; - record = (struct jbd_revoke_record_s *)list_entry; - bh = __find_get_block(journal->j_fs_dev, - record->blocknr, - journal->j_blocksize); - if (bh) { - clear_buffer_revoked(bh); - __brelse(bh); - } - } - } -} - -/* journal_switch_revoke table select j_revoke for next transaction - * we do not want to suspend any processing until all revokes are - * written -bzzz - */ -void journal_switch_revoke_table(journal_t *journal) -{ - int i; - - if (journal->j_revoke == journal->j_revoke_table[0]) - journal->j_revoke = journal->j_revoke_table[1]; - else - journal->j_revoke = journal->j_revoke_table[0]; - - for (i = 0; i < journal->j_revoke->hash_size; i++) - INIT_LIST_HEAD(&journal->j_revoke->hash_table[i]); -} - -/* - * Write revoke records to the journal for all entries in the current - * revoke hash, deleting the entries as we go. - */ -void journal_write_revoke_records(journal_t *journal, - transaction_t *transaction, int write_op) -{ - struct journal_head *descriptor; - struct jbd_revoke_record_s *record; - struct jbd_revoke_table_s *revoke; - struct list_head *hash_list; - int i, offset, count; - - descriptor = NULL; - offset = 0; - count = 0; - - /* select revoke table for committing transaction */ - revoke = journal->j_revoke == journal->j_revoke_table[0] ? - journal->j_revoke_table[1] : journal->j_revoke_table[0]; - - for (i = 0; i < revoke->hash_size; i++) { - hash_list = &revoke->hash_table[i]; - - while (!list_empty(hash_list)) { - record = (struct jbd_revoke_record_s *) - hash_list->next; - write_one_revoke_record(journal, transaction, - &descriptor, &offset, - record, write_op); - count++; - list_del(&record->hash); - kmem_cache_free(revoke_record_cache, record); - } - } - if (descriptor) - flush_descriptor(journal, descriptor, offset, write_op); - jbd_debug(1, "Wrote %d revoke records\n", count); -} - -/* - * Write out one revoke record. We need to create a new descriptor - * block if the old one is full or if we have not already created one. - */ - -static void write_one_revoke_record(journal_t *journal, - transaction_t *transaction, - struct journal_head **descriptorp, - int *offsetp, - struct jbd_revoke_record_s *record, - int write_op) -{ - struct journal_head *descriptor; - int offset; - journal_header_t *header; - - /* If we are already aborting, this all becomes a noop. We - still need to go round the loop in - journal_write_revoke_records in order to free all of the - revoke records: only the IO to the journal is omitted. */ - if (is_journal_aborted(journal)) - return; - - descriptor = *descriptorp; - offset = *offsetp; - - /* Make sure we have a descriptor with space left for the record */ - if (descriptor) { - if (offset == journal->j_blocksize) { - flush_descriptor(journal, descriptor, offset, write_op); - descriptor = NULL; - } - } - - if (!descriptor) { - descriptor = journal_get_descriptor_buffer(journal); - if (!descriptor) - return; - header = (journal_header_t *) &jh2bh(descriptor)->b_data[0]; - header->h_magic = cpu_to_be32(JFS_MAGIC_NUMBER); - header->h_blocktype = cpu_to_be32(JFS_REVOKE_BLOCK); - header->h_sequence = cpu_to_be32(transaction->t_tid); - - /* Record it so that we can wait for IO completion later */ - JBUFFER_TRACE(descriptor, "file as BJ_LogCtl"); - journal_file_buffer(descriptor, transaction, BJ_LogCtl); - - offset = sizeof(journal_revoke_header_t); - *descriptorp = descriptor; - } - - * ((__be32 *)(&jh2bh(descriptor)->b_data[offset])) = - cpu_to_be32(record->blocknr); - offset += 4; - *offsetp = offset; -} - -/* - * Flush a revoke descriptor out to the journal. If we are aborting, - * this is a noop; otherwise we are generating a buffer which needs to - * be waited for during commit, so it has to go onto the appropriate - * journal buffer list. - */ - -static void flush_descriptor(journal_t *journal, - struct journal_head *descriptor, - int offset, int write_op) -{ - journal_revoke_header_t *header; - struct buffer_head *bh = jh2bh(descriptor); - - if (is_journal_aborted(journal)) { - put_bh(bh); - return; - } - - header = (journal_revoke_header_t *) jh2bh(descriptor)->b_data; - header->r_count = cpu_to_be32(offset); - set_buffer_jwrite(bh); - BUFFER_TRACE(bh, "write"); - set_buffer_dirty(bh); - write_dirty_buffer(bh, write_op); -} -#endif - -/* - * Revoke support for recovery. - * - * Recovery needs to be able to: - * - * record all revoke records, including the tid of the latest instance - * of each revoke in the journal - * - * check whether a given block in a given transaction should be replayed - * (ie. has not been revoked by a revoke record in that or a subsequent - * transaction) - * - * empty the revoke table after recovery. - */ - -/* - * First, setting revoke records. We create a new revoke record for - * every block ever revoked in the log as we scan it for recovery, and - * we update the existing records if we find multiple revokes for a - * single block. - */ - -int journal_set_revoke(journal_t *journal, - unsigned int blocknr, - tid_t sequence) -{ - struct jbd_revoke_record_s *record; - - record = find_revoke_record(journal, blocknr); - if (record) { - /* If we have multiple occurrences, only record the - * latest sequence number in the hashed record */ - if (tid_gt(sequence, record->sequence)) - record->sequence = sequence; - return 0; - } - return insert_revoke_hash(journal, blocknr, sequence); -} - -/* - * Test revoke records. For a given block referenced in the log, has - * that block been revoked? A revoke record with a given transaction - * sequence number revokes all blocks in that transaction and earlier - * ones, but later transactions still need replayed. - */ - -int journal_test_revoke(journal_t *journal, - unsigned int blocknr, - tid_t sequence) -{ - struct jbd_revoke_record_s *record; - - record = find_revoke_record(journal, blocknr); - if (!record) - return 0; - if (tid_gt(sequence, record->sequence)) - return 0; - return 1; -} - -/* - * Finally, once recovery is over, we need to clear the revoke table so - * that it can be reused by the running filesystem. - */ - -void journal_clear_revoke(journal_t *journal) -{ - int i; - struct list_head *hash_list; - struct jbd_revoke_record_s *record; - struct jbd_revoke_table_s *revoke; - - revoke = journal->j_revoke; - - for (i = 0; i < revoke->hash_size; i++) { - hash_list = &revoke->hash_table[i]; - while (!list_empty(hash_list)) { - record = (struct jbd_revoke_record_s*) hash_list->next; - list_del(&record->hash); - kmem_cache_free(revoke_record_cache, record); - } - } -} diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c deleted file mode 100644 index 1695ba8..0000000 --- a/fs/jbd/transaction.c +++ /dev/null @@ -1,2237 +0,0 @@ -/* - * linux/fs/jbd/transaction.c - * - * Written by Stephen C. Tweedie <sct@redhat.com>, 1998 - * - * Copyright 1998 Red Hat corp --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Generic filesystem transaction handling code; part of the ext2fs - * journaling system. - * - * This file manages transactions (compound commits managed by the - * journaling code) and handles (individual atomic operations by the - * filesystem). - */ - -#include <linux/time.h> -#include <linux/fs.h> -#include <linux/jbd.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/highmem.h> -#include <linux/hrtimer.h> - -static void __journal_temp_unlink_buffer(struct journal_head *jh); - -/* - * get_transaction: obtain a new transaction_t object. - * - * Simply allocate and initialise a new transaction. Create it in - * RUNNING state and add it to the current journal (which should not - * have an existing running transaction: we only make a new transaction - * once we have started to commit the old one). - * - * Preconditions: - * The journal MUST be locked. We don't perform atomic mallocs on the - * new transaction and we can't block without protecting against other - * processes trying to touch the journal while it is in transition. - * - * Called under j_state_lock - */ - -static transaction_t * -get_transaction(journal_t *journal, transaction_t *transaction) -{ - transaction->t_journal = journal; - transaction->t_state = T_RUNNING; - transaction->t_start_time = ktime_get(); - transaction->t_tid = journal->j_transaction_sequence++; - transaction->t_expires = jiffies + journal->j_commit_interval; - spin_lock_init(&transaction->t_handle_lock); - - /* Set up the commit timer for the new transaction. */ - journal->j_commit_timer.expires = - round_jiffies_up(transaction->t_expires); - add_timer(&journal->j_commit_timer); - - J_ASSERT(journal->j_running_transaction == NULL); - journal->j_running_transaction = transaction; - - return transaction; -} - -/* - * Handle management. - * - * A handle_t is an object which represents a single atomic update to a - * filesystem, and which tracks all of the modifications which form part - * of that one update. - */ - -/* - * start_this_handle: Given a handle, deal with any locking or stalling - * needed to make sure that there is enough journal space for the handle - * to begin. Attach the handle to a transaction and set up the - * transaction's buffer credits. - */ - -static int start_this_handle(journal_t *journal, handle_t *handle) -{ - transaction_t *transaction; - int needed; - int nblocks = handle->h_buffer_credits; - transaction_t *new_transaction = NULL; - int ret = 0; - - if (nblocks > journal->j_max_transaction_buffers) { - printk(KERN_ERR "JBD: %s wants too many credits (%d > %d)\n", - current->comm, nblocks, - journal->j_max_transaction_buffers); - ret = -ENOSPC; - goto out; - } - -alloc_transaction: - if (!journal->j_running_transaction) { - new_transaction = kzalloc(sizeof(*new_transaction), - GFP_NOFS|__GFP_NOFAIL); - if (!new_transaction) { - ret = -ENOMEM; - goto out; - } - } - - jbd_debug(3, "New handle %p going live.\n", handle); - -repeat: - - /* - * We need to hold j_state_lock until t_updates has been incremented, - * for proper journal barrier handling - */ - spin_lock(&journal->j_state_lock); -repeat_locked: - if (is_journal_aborted(journal) || - (journal->j_errno != 0 && !(journal->j_flags & JFS_ACK_ERR))) { - spin_unlock(&journal->j_state_lock); - ret = -EROFS; - goto out; - } - - /* Wait on the journal's transaction barrier if necessary */ - if (journal->j_barrier_count) { - spin_unlock(&journal->j_state_lock); - wait_event(journal->j_wait_transaction_locked, - journal->j_barrier_count == 0); - goto repeat; - } - - if (!journal->j_running_transaction) { - if (!new_transaction) { - spin_unlock(&journal->j_state_lock); - goto alloc_transaction; - } - get_transaction(journal, new_transaction); - new_transaction = NULL; - } - - transaction = journal->j_running_transaction; - - /* - * If the current transaction is locked down for commit, wait for the - * lock to be released. - */ - if (transaction->t_state == T_LOCKED) { - DEFINE_WAIT(wait); - - prepare_to_wait(&journal->j_wait_transaction_locked, - &wait, TASK_UNINTERRUPTIBLE); - spin_unlock(&journal->j_state_lock); - schedule(); - finish_wait(&journal->j_wait_transaction_locked, &wait); - goto repeat; - } - - /* - * If there is not enough space left in the log to write all potential - * buffers requested by this operation, we need to stall pending a log - * checkpoint to free some more log space. - */ - spin_lock(&transaction->t_handle_lock); - needed = transaction->t_outstanding_credits + nblocks; - - if (needed > journal->j_max_transaction_buffers) { - /* - * If the current transaction is already too large, then start - * to commit it: we can then go back and attach this handle to - * a new transaction. - */ - DEFINE_WAIT(wait); - - jbd_debug(2, "Handle %p starting new commit...\n", handle); - spin_unlock(&transaction->t_handle_lock); - prepare_to_wait(&journal->j_wait_transaction_locked, &wait, - TASK_UNINTERRUPTIBLE); - __log_start_commit(journal, transaction->t_tid); - spin_unlock(&journal->j_state_lock); - schedule(); - finish_wait(&journal->j_wait_transaction_locked, &wait); - goto repeat; - } - - /* - * The commit code assumes that it can get enough log space - * without forcing a checkpoint. This is *critical* for - * correctness: a checkpoint of a buffer which is also - * associated with a committing transaction creates a deadlock, - * so commit simply cannot force through checkpoints. - * - * We must therefore ensure the necessary space in the journal - * *before* starting to dirty potentially checkpointed buffers - * in the new transaction. - * - * The worst part is, any transaction currently committing can - * reduce the free space arbitrarily. Be careful to account for - * those buffers when checkpointing. - */ - - /* - * @@@ AKPM: This seems rather over-defensive. We're giving commit - * a _lot_ of headroom: 1/4 of the journal plus the size of - * the committing transaction. Really, we only need to give it - * committing_transaction->t_outstanding_credits plus "enough" for - * the log control blocks. - * Also, this test is inconsistent with the matching one in - * journal_extend(). - */ - if (__log_space_left(journal) < jbd_space_needed(journal)) { - jbd_debug(2, "Handle %p waiting for checkpoint...\n", handle); - spin_unlock(&transaction->t_handle_lock); - __log_wait_for_space(journal); - goto repeat_locked; - } - - /* OK, account for the buffers that this operation expects to - * use and add the handle to the running transaction. */ - - handle->h_transaction = transaction; - transaction->t_outstanding_credits += nblocks; - transaction->t_updates++; - transaction->t_handle_count++; - jbd_debug(4, "Handle %p given %d credits (total %d, free %d)\n", - handle, nblocks, transaction->t_outstanding_credits, - __log_space_left(journal)); - spin_unlock(&transaction->t_handle_lock); - spin_unlock(&journal->j_state_lock); - - lock_map_acquire(&handle->h_lockdep_map); -out: - if (unlikely(new_transaction)) /* It's usually NULL */ - kfree(new_transaction); - return ret; -} - -static struct lock_class_key jbd_handle_key; - -/* Allocate a new handle. This should probably be in a slab... */ -static handle_t *new_handle(int nblocks) -{ - handle_t *handle = jbd_alloc_handle(GFP_NOFS); - if (!handle) - return NULL; - handle->h_buffer_credits = nblocks; - handle->h_ref = 1; - - lockdep_init_map(&handle->h_lockdep_map, "jbd_handle", &jbd_handle_key, 0); - - return handle; -} - -/** - * handle_t *journal_start() - Obtain a new handle. - * @journal: Journal to start transaction on. - * @nblocks: number of block buffer we might modify - * - * We make sure that the transaction can guarantee at least nblocks of - * modified buffers in the log. We block until the log can guarantee - * that much space. - * - * This function is visible to journal users (like ext3fs), so is not - * called with the journal already locked. - * - * Return a pointer to a newly allocated handle, or an ERR_PTR() value - * on failure. - */ -handle_t *journal_start(journal_t *journal, int nblocks) -{ - handle_t *handle = journal_current_handle(); - int err; - - if (!journal) - return ERR_PTR(-EROFS); - - if (handle) { - J_ASSERT(handle->h_transaction->t_journal == journal); - handle->h_ref++; - return handle; - } - - handle = new_handle(nblocks); - if (!handle) - return ERR_PTR(-ENOMEM); - - current->journal_info = handle; - - err = start_this_handle(journal, handle); - if (err < 0) { - jbd_free_handle(handle); - current->journal_info = NULL; - handle = ERR_PTR(err); - } - return handle; -} - -/** - * int journal_extend() - extend buffer credits. - * @handle: handle to 'extend' - * @nblocks: nr blocks to try to extend by. - * - * Some transactions, such as large extends and truncates, can be done - * atomically all at once or in several stages. The operation requests - * a credit for a number of buffer modications in advance, but can - * extend its credit if it needs more. - * - * journal_extend tries to give the running handle more buffer credits. - * It does not guarantee that allocation - this is a best-effort only. - * The calling process MUST be able to deal cleanly with a failure to - * extend here. - * - * Return 0 on success, non-zero on failure. - * - * return code < 0 implies an error - * return code > 0 implies normal transaction-full status. - */ -int journal_extend(handle_t *handle, int nblocks) -{ - transaction_t *transaction = handle->h_transaction; - journal_t *journal = transaction->t_journal; - int result; - int wanted; - - result = -EIO; - if (is_handle_aborted(handle)) - goto out; - - result = 1; - - spin_lock(&journal->j_state_lock); - - /* Don't extend a locked-down transaction! */ - if (handle->h_transaction->t_state != T_RUNNING) { - jbd_debug(3, "denied handle %p %d blocks: " - "transaction not running\n", handle, nblocks); - goto error_out; - } - - spin_lock(&transaction->t_handle_lock); - wanted = transaction->t_outstanding_credits + nblocks; - - if (wanted > journal->j_max_transaction_buffers) { - jbd_debug(3, "denied handle %p %d blocks: " - "transaction too large\n", handle, nblocks); - goto unlock; - } - - if (wanted > __log_space_left(journal)) { - jbd_debug(3, "denied handle %p %d blocks: " - "insufficient log space\n", handle, nblocks); - goto unlock; - } - - handle->h_buffer_credits += nblocks; - transaction->t_outstanding_credits += nblocks; - result = 0; - - jbd_debug(3, "extended handle %p by %d\n", handle, nblocks); -unlock: - spin_unlock(&transaction->t_handle_lock); -error_out: - spin_unlock(&journal->j_state_lock); -out: - return result; -} - - -/** - * int journal_restart() - restart a handle. - * @handle: handle to restart - * @nblocks: nr credits requested - * - * Restart a handle for a multi-transaction filesystem - * operation. - * - * If the journal_extend() call above fails to grant new buffer credits - * to a running handle, a call to journal_restart will commit the - * handle's transaction so far and reattach the handle to a new - * transaction capabable of guaranteeing the requested number of - * credits. - */ - -int journal_restart(handle_t *handle, int nblocks) -{ - transaction_t *transaction = handle->h_transaction; - journal_t *journal = transaction->t_journal; - int ret; - - /* If we've had an abort of any type, don't even think about - * actually doing the restart! */ - if (is_handle_aborted(handle)) - return 0; - - /* - * First unlink the handle from its current transaction, and start the - * commit on that. - */ - J_ASSERT(transaction->t_updates > 0); - J_ASSERT(journal_current_handle() == handle); - - spin_lock(&journal->j_state_lock); - spin_lock(&transaction->t_handle_lock); - transaction->t_outstanding_credits -= handle->h_buffer_credits; - transaction->t_updates--; - - if (!transaction->t_updates) - wake_up(&journal->j_wait_updates); - spin_unlock(&transaction->t_handle_lock); - - jbd_debug(2, "restarting handle %p\n", handle); - __log_start_commit(journal, transaction->t_tid); - spin_unlock(&journal->j_state_lock); - - lock_map_release(&handle->h_lockdep_map); - handle->h_buffer_credits = nblocks; - ret = start_this_handle(journal, handle); - return ret; -} - - -/** - * void journal_lock_updates () - establish a transaction barrier. - * @journal: Journal to establish a barrier on. - * - * This locks out any further updates from being started, and blocks until all - * existing updates have completed, returning only once the journal is in a - * quiescent state with no updates running. - * - * We do not use simple mutex for synchronization as there are syscalls which - * want to return with filesystem locked and that trips up lockdep. Also - * hibernate needs to lock filesystem but locked mutex then blocks hibernation. - * Since locking filesystem is rare operation, we use simple counter and - * waitqueue for locking. - */ -void journal_lock_updates(journal_t *journal) -{ - DEFINE_WAIT(wait); - -wait: - /* Wait for previous locked operation to finish */ - wait_event(journal->j_wait_transaction_locked, - journal->j_barrier_count == 0); - - spin_lock(&journal->j_state_lock); - /* - * Check reliably under the lock whether we are the ones winning the race - * and locking the journal - */ - if (journal->j_barrier_count > 0) { - spin_unlock(&journal->j_state_lock); - goto wait; - } - ++journal->j_barrier_count; - - /* Wait until there are no running updates */ - while (1) { - transaction_t *transaction = journal->j_running_transaction; - - if (!transaction) - break; - - spin_lock(&transaction->t_handle_lock); - if (!transaction->t_updates) { - spin_unlock(&transaction->t_handle_lock); - break; - } - prepare_to_wait(&journal->j_wait_updates, &wait, - TASK_UNINTERRUPTIBLE); - spin_unlock(&transaction->t_handle_lock); - spin_unlock(&journal->j_state_lock); - schedule(); - finish_wait(&journal->j_wait_updates, &wait); - spin_lock(&journal->j_state_lock); - } - spin_unlock(&journal->j_state_lock); -} - -/** - * void journal_unlock_updates (journal_t* journal) - release barrier - * @journal: Journal to release the barrier on. - * - * Release a transaction barrier obtained with journal_lock_updates(). - */ -void journal_unlock_updates (journal_t *journal) -{ - J_ASSERT(journal->j_barrier_count != 0); - - spin_lock(&journal->j_state_lock); - --journal->j_barrier_count; - spin_unlock(&journal->j_state_lock); - wake_up(&journal->j_wait_transaction_locked); -} - -static void warn_dirty_buffer(struct buffer_head *bh) -{ - char b[BDEVNAME_SIZE]; - - printk(KERN_WARNING - "JBD: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). " - "There's a risk of filesystem corruption in case of system " - "crash.\n", - bdevname(bh->b_bdev, b), (unsigned long long)bh->b_blocknr); -} - -/* - * If the buffer is already part of the current transaction, then there - * is nothing we need to do. If it is already part of a prior - * transaction which we are still committing to disk, then we need to - * make sure that we do not overwrite the old copy: we do copy-out to - * preserve the copy going to disk. We also account the buffer against - * the handle's metadata buffer credits (unless the buffer is already - * part of the transaction, that is). - * - */ -static int -do_get_write_access(handle_t *handle, struct journal_head *jh, - int force_copy) -{ - struct buffer_head *bh; - transaction_t *transaction; - journal_t *journal; - int error; - char *frozen_buffer = NULL; - int need_copy = 0; - - if (is_handle_aborted(handle)) - return -EROFS; - - transaction = handle->h_transaction; - journal = transaction->t_journal; - - jbd_debug(5, "journal_head %p, force_copy %d\n", jh, force_copy); - - JBUFFER_TRACE(jh, "entry"); -repeat: - bh = jh2bh(jh); - - /* @@@ Need to check for errors here at some point. */ - - lock_buffer(bh); - jbd_lock_bh_state(bh); - - /* We now hold the buffer lock so it is safe to query the buffer - * state. Is the buffer dirty? - * - * If so, there are two possibilities. The buffer may be - * non-journaled, and undergoing a quite legitimate writeback. - * Otherwise, it is journaled, and we don't expect dirty buffers - * in that state (the buffers should be marked JBD_Dirty - * instead.) So either the IO is being done under our own - * control and this is a bug, or it's a third party IO such as - * dump(8) (which may leave the buffer scheduled for read --- - * ie. locked but not dirty) or tune2fs (which may actually have - * the buffer dirtied, ugh.) */ - - if (buffer_dirty(bh)) { - /* - * First question: is this buffer already part of the current - * transaction or the existing committing transaction? - */ - if (jh->b_transaction) { - J_ASSERT_JH(jh, - jh->b_transaction == transaction || - jh->b_transaction == - journal->j_committing_transaction); - if (jh->b_next_transaction) - J_ASSERT_JH(jh, jh->b_next_transaction == - transaction); - warn_dirty_buffer(bh); - } - /* - * In any case we need to clean the dirty flag and we must - * do it under the buffer lock to be sure we don't race - * with running write-out. - */ - JBUFFER_TRACE(jh, "Journalling dirty buffer"); - clear_buffer_dirty(bh); - set_buffer_jbddirty(bh); - } - - unlock_buffer(bh); - - error = -EROFS; - if (is_handle_aborted(handle)) { - jbd_unlock_bh_state(bh); - goto out; - } - error = 0; - - /* - * The buffer is already part of this transaction if b_transaction or - * b_next_transaction points to it - */ - if (jh->b_transaction == transaction || - jh->b_next_transaction == transaction) - goto done; - - /* - * this is the first time this transaction is touching this buffer, - * reset the modified flag - */ - jh->b_modified = 0; - - /* - * If there is already a copy-out version of this buffer, then we don't - * need to make another one - */ - if (jh->b_frozen_data) { - JBUFFER_TRACE(jh, "has frozen data"); - J_ASSERT_JH(jh, jh->b_next_transaction == NULL); - jh->b_next_transaction = transaction; - goto done; - } - - /* Is there data here we need to preserve? */ - - if (jh->b_transaction && jh->b_transaction != transaction) { - JBUFFER_TRACE(jh, "owned by older transaction"); - J_ASSERT_JH(jh, jh->b_next_transaction == NULL); - J_ASSERT_JH(jh, jh->b_transaction == - journal->j_committing_transaction); - - /* There is one case we have to be very careful about. - * If the committing transaction is currently writing - * this buffer out to disk and has NOT made a copy-out, - * then we cannot modify the buffer contents at all - * right now. The essence of copy-out is that it is the - * extra copy, not the primary copy, which gets - * journaled. If the primary copy is already going to - * disk then we cannot do copy-out here. */ - - if (jh->b_jlist == BJ_Shadow) { - DEFINE_WAIT_BIT(wait, &bh->b_state, BH_Unshadow); - wait_queue_head_t *wqh; - - wqh = bit_waitqueue(&bh->b_state, BH_Unshadow); - - JBUFFER_TRACE(jh, "on shadow: sleep"); - jbd_unlock_bh_state(bh); - /* commit wakes up all shadow buffers after IO */ - for ( ; ; ) { - prepare_to_wait(wqh, &wait.wait, - TASK_UNINTERRUPTIBLE); - if (jh->b_jlist != BJ_Shadow) - break; - schedule(); - } - finish_wait(wqh, &wait.wait); - goto repeat; - } - - /* Only do the copy if the currently-owning transaction - * still needs it. If it is on the Forget list, the - * committing transaction is past that stage. The - * buffer had better remain locked during the kmalloc, - * but that should be true --- we hold the journal lock - * still and the buffer is already on the BUF_JOURNAL - * list so won't be flushed. - * - * Subtle point, though: if this is a get_undo_access, - * then we will be relying on the frozen_data to contain - * the new value of the committed_data record after the - * transaction, so we HAVE to force the frozen_data copy - * in that case. */ - - if (jh->b_jlist != BJ_Forget || force_copy) { - JBUFFER_TRACE(jh, "generate frozen data"); - if (!frozen_buffer) { - JBUFFER_TRACE(jh, "allocate memory for buffer"); - jbd_unlock_bh_state(bh); - frozen_buffer = - jbd_alloc(jh2bh(jh)->b_size, - GFP_NOFS); - if (!frozen_buffer) { - printk(KERN_ERR - "%s: OOM for frozen_buffer\n", - __func__); - JBUFFER_TRACE(jh, "oom!"); - error = -ENOMEM; - jbd_lock_bh_state(bh); - goto done; - } - goto repeat; - } - jh->b_frozen_data = frozen_buffer; - frozen_buffer = NULL; - need_copy = 1; - } - jh->b_next_transaction = transaction; - } - - - /* - * Finally, if the buffer is not journaled right now, we need to make - * sure it doesn't get written to disk before the caller actually - * commits the new data - */ - if (!jh->b_transaction) { - JBUFFER_TRACE(jh, "no transaction"); - J_ASSERT_JH(jh, !jh->b_next_transaction); - JBUFFER_TRACE(jh, "file as BJ_Reserved"); - spin_lock(&journal->j_list_lock); - __journal_file_buffer(jh, transaction, BJ_Reserved); - spin_unlock(&journal->j_list_lock); - } - -done: - if (need_copy) { - struct page *page; - int offset; - char *source; - - J_EXPECT_JH(jh, buffer_uptodate(jh2bh(jh)), - "Possible IO failure.\n"); - page = jh2bh(jh)->b_page; - offset = offset_in_page(jh2bh(jh)->b_data); - source = kmap_atomic(page); - memcpy(jh->b_frozen_data, source+offset, jh2bh(jh)->b_size); - kunmap_atomic(source); - } - jbd_unlock_bh_state(bh); - - /* - * If we are about to journal a buffer, then any revoke pending on it is - * no longer valid - */ - journal_cancel_revoke(handle, jh); - -out: - if (unlikely(frozen_buffer)) /* It's usually NULL */ - jbd_free(frozen_buffer, bh->b_size); - - JBUFFER_TRACE(jh, "exit"); - return error; -} - -/** - * int journal_get_write_access() - notify intent to modify a buffer for metadata (not data) update. - * @handle: transaction to add buffer modifications to - * @bh: bh to be used for metadata writes - * - * Returns an error code or 0 on success. - * - * In full data journalling mode the buffer may be of type BJ_AsyncData, - * because we're write()ing a buffer which is also part of a shared mapping. - */ - -int journal_get_write_access(handle_t *handle, struct buffer_head *bh) -{ - struct journal_head *jh = journal_add_journal_head(bh); - int rc; - - /* We do not want to get caught playing with fields which the - * log thread also manipulates. Make sure that the buffer - * completes any outstanding IO before proceeding. */ - rc = do_get_write_access(handle, jh, 0); - journal_put_journal_head(jh); - return rc; -} - - -/* - * When the user wants to journal a newly created buffer_head - * (ie. getblk() returned a new buffer and we are going to populate it - * manually rather than reading off disk), then we need to keep the - * buffer_head locked until it has been completely filled with new - * data. In this case, we should be able to make the assertion that - * the bh is not already part of an existing transaction. - * - * The buffer should already be locked by the caller by this point. - * There is no lock ranking violation: it was a newly created, - * unlocked buffer beforehand. */ - -/** - * int journal_get_create_access () - notify intent to use newly created bh - * @handle: transaction to new buffer to - * @bh: new buffer. - * - * Call this if you create a new bh. - */ -int journal_get_create_access(handle_t *handle, struct buffer_head *bh) -{ - transaction_t *transaction = handle->h_transaction; - journal_t *journal = transaction->t_journal; - struct journal_head *jh = journal_add_journal_head(bh); - int err; - - jbd_debug(5, "journal_head %p\n", jh); - err = -EROFS; - if (is_handle_aborted(handle)) - goto out; - err = 0; - - JBUFFER_TRACE(jh, "entry"); - /* - * The buffer may already belong to this transaction due to pre-zeroing - * in the filesystem's new_block code. It may also be on the previous, - * committing transaction's lists, but it HAS to be in Forget state in - * that case: the transaction must have deleted the buffer for it to be - * reused here. - */ - jbd_lock_bh_state(bh); - spin_lock(&journal->j_list_lock); - J_ASSERT_JH(jh, (jh->b_transaction == transaction || - jh->b_transaction == NULL || - (jh->b_transaction == journal->j_committing_transaction && - jh->b_jlist == BJ_Forget))); - - J_ASSERT_JH(jh, jh->b_next_transaction == NULL); - J_ASSERT_JH(jh, buffer_locked(jh2bh(jh))); - - if (jh->b_transaction == NULL) { - /* - * Previous journal_forget() could have left the buffer - * with jbddirty bit set because it was being committed. When - * the commit finished, we've filed the buffer for - * checkpointing and marked it dirty. Now we are reallocating - * the buffer so the transaction freeing it must have - * committed and so it's safe to clear the dirty bit. - */ - clear_buffer_dirty(jh2bh(jh)); - - /* first access by this transaction */ - jh->b_modified = 0; - - JBUFFER_TRACE(jh, "file as BJ_Reserved"); - __journal_file_buffer(jh, transaction, BJ_Reserved); - } else if (jh->b_transaction == journal->j_committing_transaction) { - /* first access by this transaction */ - jh->b_modified = 0; - - JBUFFER_TRACE(jh, "set next transaction"); - jh->b_next_transaction = transaction; - } - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - - /* - * akpm: I added this. ext3_alloc_branch can pick up new indirect - * blocks which contain freed but then revoked metadata. We need - * to cancel the revoke in case we end up freeing it yet again - * and the reallocating as data - this would cause a second revoke, - * which hits an assertion error. - */ - JBUFFER_TRACE(jh, "cancelling revoke"); - journal_cancel_revoke(handle, jh); -out: - journal_put_journal_head(jh); - return err; -} - -/** - * int journal_get_undo_access() - Notify intent to modify metadata with non-rewindable consequences - * @handle: transaction - * @bh: buffer to undo - * - * Sometimes there is a need to distinguish between metadata which has - * been committed to disk and that which has not. The ext3fs code uses - * this for freeing and allocating space, we have to make sure that we - * do not reuse freed space until the deallocation has been committed, - * since if we overwrote that space we would make the delete - * un-rewindable in case of a crash. - * - * To deal with that, journal_get_undo_access requests write access to a - * buffer for parts of non-rewindable operations such as delete - * operations on the bitmaps. The journaling code must keep a copy of - * the buffer's contents prior to the undo_access call until such time - * as we know that the buffer has definitely been committed to disk. - * - * We never need to know which transaction the committed data is part - * of, buffers touched here are guaranteed to be dirtied later and so - * will be committed to a new transaction in due course, at which point - * we can discard the old committed data pointer. - * - * Returns error number or 0 on success. - */ -int journal_get_undo_access(handle_t *handle, struct buffer_head *bh) -{ - int err; - struct journal_head *jh = journal_add_journal_head(bh); - char *committed_data = NULL; - - JBUFFER_TRACE(jh, "entry"); - - /* - * Do this first --- it can drop the journal lock, so we want to - * make sure that obtaining the committed_data is done - * atomically wrt. completion of any outstanding commits. - */ - err = do_get_write_access(handle, jh, 1); - if (err) - goto out; - -repeat: - if (!jh->b_committed_data) { - committed_data = jbd_alloc(jh2bh(jh)->b_size, GFP_NOFS); - if (!committed_data) { - printk(KERN_ERR "%s: No memory for committed data\n", - __func__); - err = -ENOMEM; - goto out; - } - } - - jbd_lock_bh_state(bh); - if (!jh->b_committed_data) { - /* Copy out the current buffer contents into the - * preserved, committed copy. */ - JBUFFER_TRACE(jh, "generate b_committed data"); - if (!committed_data) { - jbd_unlock_bh_state(bh); - goto repeat; - } - - jh->b_committed_data = committed_data; - committed_data = NULL; - memcpy(jh->b_committed_data, bh->b_data, bh->b_size); - } - jbd_unlock_bh_state(bh); -out: - journal_put_journal_head(jh); - if (unlikely(committed_data)) - jbd_free(committed_data, bh->b_size); - return err; -} - -/** - * int journal_dirty_data() - mark a buffer as containing dirty data to be flushed - * @handle: transaction - * @bh: bufferhead to mark - * - * Description: - * Mark a buffer as containing dirty data which needs to be flushed before - * we can commit the current transaction. - * - * The buffer is placed on the transaction's data list and is marked as - * belonging to the transaction. - * - * Returns error number or 0 on success. - * - * journal_dirty_data() can be called via page_launder->ext3_writepage - * by kswapd. - */ -int journal_dirty_data(handle_t *handle, struct buffer_head *bh) -{ - journal_t *journal = handle->h_transaction->t_journal; - int need_brelse = 0; - struct journal_head *jh; - int ret = 0; - - if (is_handle_aborted(handle)) - return ret; - - jh = journal_add_journal_head(bh); - JBUFFER_TRACE(jh, "entry"); - - /* - * The buffer could *already* be dirty. Writeout can start - * at any time. - */ - jbd_debug(4, "jh: %p, tid:%d\n", jh, handle->h_transaction->t_tid); - - /* - * What if the buffer is already part of a running transaction? - * - * There are two cases: - * 1) It is part of the current running transaction. Refile it, - * just in case we have allocated it as metadata, deallocated - * it, then reallocated it as data. - * 2) It is part of the previous, still-committing transaction. - * If all we want to do is to guarantee that the buffer will be - * written to disk before this new transaction commits, then - * being sure that the *previous* transaction has this same - * property is sufficient for us! Just leave it on its old - * transaction. - * - * In case (2), the buffer must not already exist as metadata - * --- that would violate write ordering (a transaction is free - * to write its data at any point, even before the previous - * committing transaction has committed). The caller must - * never, ever allow this to happen: there's nothing we can do - * about it in this layer. - */ - jbd_lock_bh_state(bh); - spin_lock(&journal->j_list_lock); - - /* Now that we have bh_state locked, are we really still mapped? */ - if (!buffer_mapped(bh)) { - JBUFFER_TRACE(jh, "unmapped buffer, bailing out"); - goto no_journal; - } - - if (jh->b_transaction) { - JBUFFER_TRACE(jh, "has transaction"); - if (jh->b_transaction != handle->h_transaction) { - JBUFFER_TRACE(jh, "belongs to older transaction"); - J_ASSERT_JH(jh, jh->b_transaction == - journal->j_committing_transaction); - - /* @@@ IS THIS TRUE ? */ - /* - * Not any more. Scenario: someone does a write() - * in data=journal mode. The buffer's transaction has - * moved into commit. Then someone does another - * write() to the file. We do the frozen data copyout - * and set b_next_transaction to point to j_running_t. - * And while we're in that state, someone does a - * writepage() in an attempt to pageout the same area - * of the file via a shared mapping. At present that - * calls journal_dirty_data(), and we get right here. - * It may be too late to journal the data. Simply - * falling through to the next test will suffice: the - * data will be dirty and wil be checkpointed. The - * ordering comments in the next comment block still - * apply. - */ - //J_ASSERT_JH(jh, jh->b_next_transaction == NULL); - - /* - * If we're journalling data, and this buffer was - * subject to a write(), it could be metadata, forget - * or shadow against the committing transaction. Now, - * someone has dirtied the same darn page via a mapping - * and it is being writepage()'d. - * We *could* just steal the page from commit, with some - * fancy locking there. Instead, we just skip it - - * don't tie the page's buffers to the new transaction - * at all. - * Implication: if we crash before the writepage() data - * is written into the filesystem, recovery will replay - * the write() data. - */ - if (jh->b_jlist != BJ_None && - jh->b_jlist != BJ_SyncData && - jh->b_jlist != BJ_Locked) { - JBUFFER_TRACE(jh, "Not stealing"); - goto no_journal; - } - - /* - * This buffer may be undergoing writeout in commit. We - * can't return from here and let the caller dirty it - * again because that can cause the write-out loop in - * commit to never terminate. - */ - if (buffer_dirty(bh)) { - get_bh(bh); - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - need_brelse = 1; - sync_dirty_buffer(bh); - jbd_lock_bh_state(bh); - spin_lock(&journal->j_list_lock); - /* Since we dropped the lock... */ - if (!buffer_mapped(bh)) { - JBUFFER_TRACE(jh, "buffer got unmapped"); - goto no_journal; - } - /* The buffer may become locked again at any - time if it is redirtied */ - } - - /* - * We cannot remove the buffer with io error from the - * committing transaction, because otherwise it would - * miss the error and the commit would not abort. - */ - if (unlikely(!buffer_uptodate(bh))) { - ret = -EIO; - goto no_journal; - } - /* We might have slept so buffer could be refiled now */ - if (jh->b_transaction != NULL && - jh->b_transaction != handle->h_transaction) { - JBUFFER_TRACE(jh, "unfile from commit"); - __journal_temp_unlink_buffer(jh); - /* It still points to the committing - * transaction; move it to this one so - * that the refile assert checks are - * happy. */ - jh->b_transaction = handle->h_transaction; - } - /* The buffer will be refiled below */ - - } - /* - * Special case --- the buffer might actually have been - * allocated and then immediately deallocated in the previous, - * committing transaction, so might still be left on that - * transaction's metadata lists. - */ - if (jh->b_jlist != BJ_SyncData && jh->b_jlist != BJ_Locked) { - JBUFFER_TRACE(jh, "not on correct data list: unfile"); - J_ASSERT_JH(jh, jh->b_jlist != BJ_Shadow); - JBUFFER_TRACE(jh, "file as data"); - __journal_file_buffer(jh, handle->h_transaction, - BJ_SyncData); - } - } else { - JBUFFER_TRACE(jh, "not on a transaction"); - __journal_file_buffer(jh, handle->h_transaction, BJ_SyncData); - } -no_journal: - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - if (need_brelse) { - BUFFER_TRACE(bh, "brelse"); - __brelse(bh); - } - JBUFFER_TRACE(jh, "exit"); - journal_put_journal_head(jh); - return ret; -} - -/** - * int journal_dirty_metadata() - mark a buffer as containing dirty metadata - * @handle: transaction to add buffer to. - * @bh: buffer to mark - * - * Mark dirty metadata which needs to be journaled as part of the current - * transaction. - * - * The buffer is placed on the transaction's metadata list and is marked - * as belonging to the transaction. - * - * Returns error number or 0 on success. - * - * Special care needs to be taken if the buffer already belongs to the - * current committing transaction (in which case we should have frozen - * data present for that commit). In that case, we don't relink the - * buffer: that only gets done when the old transaction finally - * completes its commit. - */ -int journal_dirty_metadata(handle_t *handle, struct buffer_head *bh) -{ - transaction_t *transaction = handle->h_transaction; - journal_t *journal = transaction->t_journal; - struct journal_head *jh = bh2jh(bh); - - jbd_debug(5, "journal_head %p\n", jh); - JBUFFER_TRACE(jh, "entry"); - if (is_handle_aborted(handle)) - goto out; - - jbd_lock_bh_state(bh); - - if (jh->b_modified == 0) { - /* - * This buffer's got modified and becoming part - * of the transaction. This needs to be done - * once a transaction -bzzz - */ - jh->b_modified = 1; - J_ASSERT_JH(jh, handle->h_buffer_credits > 0); - handle->h_buffer_credits--; - } - - /* - * fastpath, to avoid expensive locking. If this buffer is already - * on the running transaction's metadata list there is nothing to do. - * Nobody can take it off again because there is a handle open. - * I _think_ we're OK here with SMP barriers - a mistaken decision will - * result in this test being false, so we go in and take the locks. - */ - if (jh->b_transaction == transaction && jh->b_jlist == BJ_Metadata) { - JBUFFER_TRACE(jh, "fastpath"); - J_ASSERT_JH(jh, jh->b_transaction == - journal->j_running_transaction); - goto out_unlock_bh; - } - - set_buffer_jbddirty(bh); - - /* - * Metadata already on the current transaction list doesn't - * need to be filed. Metadata on another transaction's list must - * be committing, and will be refiled once the commit completes: - * leave it alone for now. - */ - if (jh->b_transaction != transaction) { - JBUFFER_TRACE(jh, "already on other transaction"); - J_ASSERT_JH(jh, jh->b_transaction == - journal->j_committing_transaction); - J_ASSERT_JH(jh, jh->b_next_transaction == transaction); - /* And this case is illegal: we can't reuse another - * transaction's data buffer, ever. */ - goto out_unlock_bh; - } - - /* That test should have eliminated the following case: */ - J_ASSERT_JH(jh, jh->b_frozen_data == NULL); - - JBUFFER_TRACE(jh, "file as BJ_Metadata"); - spin_lock(&journal->j_list_lock); - __journal_file_buffer(jh, handle->h_transaction, BJ_Metadata); - spin_unlock(&journal->j_list_lock); -out_unlock_bh: - jbd_unlock_bh_state(bh); -out: - JBUFFER_TRACE(jh, "exit"); - return 0; -} - -/* - * journal_release_buffer: undo a get_write_access without any buffer - * updates, if the update decided in the end that it didn't need access. - * - */ -void -journal_release_buffer(handle_t *handle, struct buffer_head *bh) -{ - BUFFER_TRACE(bh, "entry"); -} - -/** - * void journal_forget() - bforget() for potentially-journaled buffers. - * @handle: transaction handle - * @bh: bh to 'forget' - * - * We can only do the bforget if there are no commits pending against the - * buffer. If the buffer is dirty in the current running transaction we - * can safely unlink it. - * - * bh may not be a journalled buffer at all - it may be a non-JBD - * buffer which came off the hashtable. Check for this. - * - * Decrements bh->b_count by one. - * - * Allow this call even if the handle has aborted --- it may be part of - * the caller's cleanup after an abort. - */ -int journal_forget (handle_t *handle, struct buffer_head *bh) -{ - transaction_t *transaction = handle->h_transaction; - journal_t *journal = transaction->t_journal; - struct journal_head *jh; - int drop_reserve = 0; - int err = 0; - int was_modified = 0; - - BUFFER_TRACE(bh, "entry"); - - jbd_lock_bh_state(bh); - spin_lock(&journal->j_list_lock); - - if (!buffer_jbd(bh)) - goto not_jbd; - jh = bh2jh(bh); - - /* Critical error: attempting to delete a bitmap buffer, maybe? - * Don't do any jbd operations, and return an error. */ - if (!J_EXPECT_JH(jh, !jh->b_committed_data, - "inconsistent data on disk")) { - err = -EIO; - goto not_jbd; - } - - /* keep track of whether or not this transaction modified us */ - was_modified = jh->b_modified; - - /* - * The buffer's going from the transaction, we must drop - * all references -bzzz - */ - jh->b_modified = 0; - - if (jh->b_transaction == handle->h_transaction) { - J_ASSERT_JH(jh, !jh->b_frozen_data); - - /* If we are forgetting a buffer which is already part - * of this transaction, then we can just drop it from - * the transaction immediately. */ - clear_buffer_dirty(bh); - clear_buffer_jbddirty(bh); - - JBUFFER_TRACE(jh, "belongs to current transaction: unfile"); - - /* - * we only want to drop a reference if this transaction - * modified the buffer - */ - if (was_modified) - drop_reserve = 1; - - /* - * We are no longer going to journal this buffer. - * However, the commit of this transaction is still - * important to the buffer: the delete that we are now - * processing might obsolete an old log entry, so by - * committing, we can satisfy the buffer's checkpoint. - * - * So, if we have a checkpoint on the buffer, we should - * now refile the buffer on our BJ_Forget list so that - * we know to remove the checkpoint after we commit. - */ - - if (jh->b_cp_transaction) { - __journal_temp_unlink_buffer(jh); - __journal_file_buffer(jh, transaction, BJ_Forget); - } else { - __journal_unfile_buffer(jh); - if (!buffer_jbd(bh)) { - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - __bforget(bh); - goto drop; - } - } - } else if (jh->b_transaction) { - J_ASSERT_JH(jh, (jh->b_transaction == - journal->j_committing_transaction)); - /* However, if the buffer is still owned by a prior - * (committing) transaction, we can't drop it yet... */ - JBUFFER_TRACE(jh, "belongs to older transaction"); - /* ... but we CAN drop it from the new transaction if we - * have also modified it since the original commit. */ - - if (jh->b_next_transaction) { - J_ASSERT(jh->b_next_transaction == transaction); - jh->b_next_transaction = NULL; - - /* - * only drop a reference if this transaction modified - * the buffer - */ - if (was_modified) - drop_reserve = 1; - } - } - -not_jbd: - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - __brelse(bh); -drop: - if (drop_reserve) { - /* no need to reserve log space for this block -bzzz */ - handle->h_buffer_credits++; - } - return err; -} - -/** - * int journal_stop() - complete a transaction - * @handle: tranaction to complete. - * - * All done for a particular handle. - * - * There is not much action needed here. We just return any remaining - * buffer credits to the transaction and remove the handle. The only - * complication is that we need to start a commit operation if the - * filesystem is marked for synchronous update. - * - * journal_stop itself will not usually return an error, but it may - * do so in unusual circumstances. In particular, expect it to - * return -EIO if a journal_abort has been executed since the - * transaction began. - */ -int journal_stop(handle_t *handle) -{ - transaction_t *transaction = handle->h_transaction; - journal_t *journal = transaction->t_journal; - int err; - pid_t pid; - - J_ASSERT(journal_current_handle() == handle); - - if (is_handle_aborted(handle)) - err = -EIO; - else { - J_ASSERT(transaction->t_updates > 0); - err = 0; - } - - if (--handle->h_ref > 0) { - jbd_debug(4, "h_ref %d -> %d\n", handle->h_ref + 1, - handle->h_ref); - return err; - } - - jbd_debug(4, "Handle %p going down\n", handle); - - /* - * Implement synchronous transaction batching. If the handle - * was synchronous, don't force a commit immediately. Let's - * yield and let another thread piggyback onto this transaction. - * Keep doing that while new threads continue to arrive. - * It doesn't cost much - we're about to run a commit and sleep - * on IO anyway. Speeds up many-threaded, many-dir operations - * by 30x or more... - * - * We try and optimize the sleep time against what the underlying disk - * can do, instead of having a static sleep time. This is useful for - * the case where our storage is so fast that it is more optimal to go - * ahead and force a flush and wait for the transaction to be committed - * than it is to wait for an arbitrary amount of time for new writers to - * join the transaction. We achieve this by measuring how long it takes - * to commit a transaction, and compare it with how long this - * transaction has been running, and if run time < commit time then we - * sleep for the delta and commit. This greatly helps super fast disks - * that would see slowdowns as more threads started doing fsyncs. - * - * But don't do this if this process was the most recent one to - * perform a synchronous write. We do this to detect the case where a - * single process is doing a stream of sync writes. No point in waiting - * for joiners in that case. - */ - pid = current->pid; - if (handle->h_sync && journal->j_last_sync_writer != pid) { - u64 commit_time, trans_time; - - journal->j_last_sync_writer = pid; - - spin_lock(&journal->j_state_lock); - commit_time = journal->j_average_commit_time; - spin_unlock(&journal->j_state_lock); - - trans_time = ktime_to_ns(ktime_sub(ktime_get(), - transaction->t_start_time)); - - commit_time = min_t(u64, commit_time, - 1000*jiffies_to_usecs(1)); - - if (trans_time < commit_time) { - ktime_t expires = ktime_add_ns(ktime_get(), - commit_time); - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_hrtimeout(&expires, HRTIMER_MODE_ABS); - } - } - - current->journal_info = NULL; - spin_lock(&journal->j_state_lock); - spin_lock(&transaction->t_handle_lock); - transaction->t_outstanding_credits -= handle->h_buffer_credits; - transaction->t_updates--; - if (!transaction->t_updates) { - wake_up(&journal->j_wait_updates); - if (journal->j_barrier_count) - wake_up(&journal->j_wait_transaction_locked); - } - - /* - * If the handle is marked SYNC, we need to set another commit - * going! We also want to force a commit if the current - * transaction is occupying too much of the log, or if the - * transaction is too old now. - */ - if (handle->h_sync || - transaction->t_outstanding_credits > - journal->j_max_transaction_buffers || - time_after_eq(jiffies, transaction->t_expires)) { - /* Do this even for aborted journals: an abort still - * completes the commit thread, it just doesn't write - * anything to disk. */ - tid_t tid = transaction->t_tid; - - spin_unlock(&transaction->t_handle_lock); - jbd_debug(2, "transaction too old, requesting commit for " - "handle %p\n", handle); - /* This is non-blocking */ - __log_start_commit(journal, transaction->t_tid); - spin_unlock(&journal->j_state_lock); - - /* - * Special case: JFS_SYNC synchronous updates require us - * to wait for the commit to complete. - */ - if (handle->h_sync && !(current->flags & PF_MEMALLOC)) - err = log_wait_commit(journal, tid); - } else { - spin_unlock(&transaction->t_handle_lock); - spin_unlock(&journal->j_state_lock); - } - - lock_map_release(&handle->h_lockdep_map); - - jbd_free_handle(handle); - return err; -} - -/** - * int journal_force_commit() - force any uncommitted transactions - * @journal: journal to force - * - * For synchronous operations: force any uncommitted transactions - * to disk. May seem kludgy, but it reuses all the handle batching - * code in a very simple manner. - */ -int journal_force_commit(journal_t *journal) -{ - handle_t *handle; - int ret; - - handle = journal_start(journal, 1); - if (IS_ERR(handle)) { - ret = PTR_ERR(handle); - } else { - handle->h_sync = 1; - ret = journal_stop(handle); - } - return ret; -} - -/* - * - * List management code snippets: various functions for manipulating the - * transaction buffer lists. - * - */ - -/* - * Append a buffer to a transaction list, given the transaction's list head - * pointer. - * - * j_list_lock is held. - * - * jbd_lock_bh_state(jh2bh(jh)) is held. - */ - -static inline void -__blist_add_buffer(struct journal_head **list, struct journal_head *jh) -{ - if (!*list) { - jh->b_tnext = jh->b_tprev = jh; - *list = jh; - } else { - /* Insert at the tail of the list to preserve order */ - struct journal_head *first = *list, *last = first->b_tprev; - jh->b_tprev = last; - jh->b_tnext = first; - last->b_tnext = first->b_tprev = jh; - } -} - -/* - * Remove a buffer from a transaction list, given the transaction's list - * head pointer. - * - * Called with j_list_lock held, and the journal may not be locked. - * - * jbd_lock_bh_state(jh2bh(jh)) is held. - */ - -static inline void -__blist_del_buffer(struct journal_head **list, struct journal_head *jh) -{ - if (*list == jh) { - *list = jh->b_tnext; - if (*list == jh) - *list = NULL; - } - jh->b_tprev->b_tnext = jh->b_tnext; - jh->b_tnext->b_tprev = jh->b_tprev; -} - -/* - * Remove a buffer from the appropriate transaction list. - * - * Note that this function can *change* the value of - * bh->b_transaction->t_sync_datalist, t_buffers, t_forget, - * t_iobuf_list, t_shadow_list, t_log_list or t_reserved_list. If the caller - * is holding onto a copy of one of thee pointers, it could go bad. - * Generally the caller needs to re-read the pointer from the transaction_t. - * - * Called under j_list_lock. The journal may not be locked. - */ -static void __journal_temp_unlink_buffer(struct journal_head *jh) -{ - struct journal_head **list = NULL; - transaction_t *transaction; - struct buffer_head *bh = jh2bh(jh); - - J_ASSERT_JH(jh, jbd_is_locked_bh_state(bh)); - transaction = jh->b_transaction; - if (transaction) - assert_spin_locked(&transaction->t_journal->j_list_lock); - - J_ASSERT_JH(jh, jh->b_jlist < BJ_Types); - if (jh->b_jlist != BJ_None) - J_ASSERT_JH(jh, transaction != NULL); - - switch (jh->b_jlist) { - case BJ_None: - return; - case BJ_SyncData: - list = &transaction->t_sync_datalist; - break; - case BJ_Metadata: - transaction->t_nr_buffers--; - J_ASSERT_JH(jh, transaction->t_nr_buffers >= 0); - list = &transaction->t_buffers; - break; - case BJ_Forget: - list = &transaction->t_forget; - break; - case BJ_IO: - list = &transaction->t_iobuf_list; - break; - case BJ_Shadow: - list = &transaction->t_shadow_list; - break; - case BJ_LogCtl: - list = &transaction->t_log_list; - break; - case BJ_Reserved: - list = &transaction->t_reserved_list; - break; - case BJ_Locked: - list = &transaction->t_locked_list; - break; - } - - __blist_del_buffer(list, jh); - jh->b_jlist = BJ_None; - if (test_clear_buffer_jbddirty(bh)) - mark_buffer_dirty(bh); /* Expose it to the VM */ -} - -/* - * Remove buffer from all transactions. - * - * Called with bh_state lock and j_list_lock - * - * jh and bh may be already freed when this function returns. - */ -void __journal_unfile_buffer(struct journal_head *jh) -{ - __journal_temp_unlink_buffer(jh); - jh->b_transaction = NULL; - journal_put_journal_head(jh); -} - -void journal_unfile_buffer(journal_t *journal, struct journal_head *jh) -{ - struct buffer_head *bh = jh2bh(jh); - - /* Get reference so that buffer cannot be freed before we unlock it */ - get_bh(bh); - jbd_lock_bh_state(bh); - spin_lock(&journal->j_list_lock); - __journal_unfile_buffer(jh); - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - __brelse(bh); -} - -/* - * Called from journal_try_to_free_buffers(). - * - * Called under jbd_lock_bh_state(bh) - */ -static void -__journal_try_to_free_buffer(journal_t *journal, struct buffer_head *bh) -{ - struct journal_head *jh; - - jh = bh2jh(bh); - - if (buffer_locked(bh) || buffer_dirty(bh)) - goto out; - - if (jh->b_next_transaction != NULL) - goto out; - - spin_lock(&journal->j_list_lock); - if (jh->b_transaction != NULL && jh->b_cp_transaction == NULL) { - if (jh->b_jlist == BJ_SyncData || jh->b_jlist == BJ_Locked) { - /* A written-back ordered data buffer */ - JBUFFER_TRACE(jh, "release data"); - __journal_unfile_buffer(jh); - } - } else if (jh->b_cp_transaction != NULL && jh->b_transaction == NULL) { - /* written-back checkpointed metadata buffer */ - if (jh->b_jlist == BJ_None) { - JBUFFER_TRACE(jh, "remove from checkpoint list"); - __journal_remove_checkpoint(jh); - } - } - spin_unlock(&journal->j_list_lock); -out: - return; -} - -/** - * int journal_try_to_free_buffers() - try to free page buffers. - * @journal: journal for operation - * @page: to try and free - * @gfp_mask: we use the mask to detect how hard should we try to release - * buffers. If __GFP_WAIT and __GFP_FS is set, we wait for commit code to - * release the buffers. - * - * - * For all the buffers on this page, - * if they are fully written out ordered data, move them onto BUF_CLEAN - * so try_to_free_buffers() can reap them. - * - * This function returns non-zero if we wish try_to_free_buffers() - * to be called. We do this if the page is releasable by try_to_free_buffers(). - * We also do it if the page has locked or dirty buffers and the caller wants - * us to perform sync or async writeout. - * - * This complicates JBD locking somewhat. We aren't protected by the - * BKL here. We wish to remove the buffer from its committing or - * running transaction's ->t_datalist via __journal_unfile_buffer. - * - * This may *change* the value of transaction_t->t_datalist, so anyone - * who looks at t_datalist needs to lock against this function. - * - * Even worse, someone may be doing a journal_dirty_data on this - * buffer. So we need to lock against that. journal_dirty_data() - * will come out of the lock with the buffer dirty, which makes it - * ineligible for release here. - * - * Who else is affected by this? hmm... Really the only contender - * is do_get_write_access() - it could be looking at the buffer while - * journal_try_to_free_buffer() is changing its state. But that - * cannot happen because we never reallocate freed data as metadata - * while the data is part of a transaction. Yes? - * - * Return 0 on failure, 1 on success - */ -int journal_try_to_free_buffers(journal_t *journal, - struct page *page, gfp_t gfp_mask) -{ - struct buffer_head *head; - struct buffer_head *bh; - int ret = 0; - - J_ASSERT(PageLocked(page)); - - head = page_buffers(page); - bh = head; - do { - struct journal_head *jh; - - /* - * We take our own ref against the journal_head here to avoid - * having to add tons of locking around each instance of - * journal_put_journal_head(). - */ - jh = journal_grab_journal_head(bh); - if (!jh) - continue; - - jbd_lock_bh_state(bh); - __journal_try_to_free_buffer(journal, bh); - journal_put_journal_head(jh); - jbd_unlock_bh_state(bh); - if (buffer_jbd(bh)) - goto busy; - } while ((bh = bh->b_this_page) != head); - - ret = try_to_free_buffers(page); - -busy: - return ret; -} - -/* - * This buffer is no longer needed. If it is on an older transaction's - * checkpoint list we need to record it on this transaction's forget list - * to pin this buffer (and hence its checkpointing transaction) down until - * this transaction commits. If the buffer isn't on a checkpoint list, we - * release it. - * Returns non-zero if JBD no longer has an interest in the buffer. - * - * Called under j_list_lock. - * - * Called under jbd_lock_bh_state(bh). - */ -static int __dispose_buffer(struct journal_head *jh, transaction_t *transaction) -{ - int may_free = 1; - struct buffer_head *bh = jh2bh(jh); - - if (jh->b_cp_transaction) { - JBUFFER_TRACE(jh, "on running+cp transaction"); - __journal_temp_unlink_buffer(jh); - /* - * We don't want to write the buffer anymore, clear the - * bit so that we don't confuse checks in - * __journal_file_buffer - */ - clear_buffer_dirty(bh); - __journal_file_buffer(jh, transaction, BJ_Forget); - may_free = 0; - } else { - JBUFFER_TRACE(jh, "on running transaction"); - __journal_unfile_buffer(jh); - } - return may_free; -} - -/* - * journal_invalidatepage - * - * This code is tricky. It has a number of cases to deal with. - * - * There are two invariants which this code relies on: - * - * i_size must be updated on disk before we start calling invalidatepage on the - * data. - * - * This is done in ext3 by defining an ext3_setattr method which - * updates i_size before truncate gets going. By maintaining this - * invariant, we can be sure that it is safe to throw away any buffers - * attached to the current transaction: once the transaction commits, - * we know that the data will not be needed. - * - * Note however that we can *not* throw away data belonging to the - * previous, committing transaction! - * - * Any disk blocks which *are* part of the previous, committing - * transaction (and which therefore cannot be discarded immediately) are - * not going to be reused in the new running transaction - * - * The bitmap committed_data images guarantee this: any block which is - * allocated in one transaction and removed in the next will be marked - * as in-use in the committed_data bitmap, so cannot be reused until - * the next transaction to delete the block commits. This means that - * leaving committing buffers dirty is quite safe: the disk blocks - * cannot be reallocated to a different file and so buffer aliasing is - * not possible. - * - * - * The above applies mainly to ordered data mode. In writeback mode we - * don't make guarantees about the order in which data hits disk --- in - * particular we don't guarantee that new dirty data is flushed before - * transaction commit --- so it is always safe just to discard data - * immediately in that mode. --sct - */ - -/* - * The journal_unmap_buffer helper function returns zero if the buffer - * concerned remains pinned as an anonymous buffer belonging to an older - * transaction. - * - * We're outside-transaction here. Either or both of j_running_transaction - * and j_committing_transaction may be NULL. - */ -static int journal_unmap_buffer(journal_t *journal, struct buffer_head *bh, - int partial_page) -{ - transaction_t *transaction; - struct journal_head *jh; - int may_free = 1; - - BUFFER_TRACE(bh, "entry"); - -retry: - /* - * It is safe to proceed here without the j_list_lock because the - * buffers cannot be stolen by try_to_free_buffers as long as we are - * holding the page lock. --sct - */ - - if (!buffer_jbd(bh)) - goto zap_buffer_unlocked; - - spin_lock(&journal->j_state_lock); - jbd_lock_bh_state(bh); - spin_lock(&journal->j_list_lock); - - jh = journal_grab_journal_head(bh); - if (!jh) - goto zap_buffer_no_jh; - - /* - * We cannot remove the buffer from checkpoint lists until the - * transaction adding inode to orphan list (let's call it T) - * is committed. Otherwise if the transaction changing the - * buffer would be cleaned from the journal before T is - * committed, a crash will cause that the correct contents of - * the buffer will be lost. On the other hand we have to - * clear the buffer dirty bit at latest at the moment when the - * transaction marking the buffer as freed in the filesystem - * structures is committed because from that moment on the - * block can be reallocated and used by a different page. - * Since the block hasn't been freed yet but the inode has - * already been added to orphan list, it is safe for us to add - * the buffer to BJ_Forget list of the newest transaction. - * - * Also we have to clear buffer_mapped flag of a truncated buffer - * because the buffer_head may be attached to the page straddling - * i_size (can happen only when blocksize < pagesize) and thus the - * buffer_head can be reused when the file is extended again. So we end - * up keeping around invalidated buffers attached to transactions' - * BJ_Forget list just to stop checkpointing code from cleaning up - * the transaction this buffer was modified in. - */ - transaction = jh->b_transaction; - if (transaction == NULL) { - /* First case: not on any transaction. If it - * has no checkpoint link, then we can zap it: - * it's a writeback-mode buffer so we don't care - * if it hits disk safely. */ - if (!jh->b_cp_transaction) { - JBUFFER_TRACE(jh, "not on any transaction: zap"); - goto zap_buffer; - } - - if (!buffer_dirty(bh)) { - /* bdflush has written it. We can drop it now */ - goto zap_buffer; - } - - /* OK, it must be in the journal but still not - * written fully to disk: it's metadata or - * journaled data... */ - - if (journal->j_running_transaction) { - /* ... and once the current transaction has - * committed, the buffer won't be needed any - * longer. */ - JBUFFER_TRACE(jh, "checkpointed: add to BJ_Forget"); - may_free = __dispose_buffer(jh, - journal->j_running_transaction); - goto zap_buffer; - } else { - /* There is no currently-running transaction. So the - * orphan record which we wrote for this file must have - * passed into commit. We must attach this buffer to - * the committing transaction, if it exists. */ - if (journal->j_committing_transaction) { - JBUFFER_TRACE(jh, "give to committing trans"); - may_free = __dispose_buffer(jh, - journal->j_committing_transaction); - goto zap_buffer; - } else { - /* The orphan record's transaction has - * committed. We can cleanse this buffer */ - clear_buffer_jbddirty(bh); - goto zap_buffer; - } - } - } else if (transaction == journal->j_committing_transaction) { - JBUFFER_TRACE(jh, "on committing transaction"); - if (jh->b_jlist == BJ_Locked) { - /* - * The buffer is on the committing transaction's locked - * list. We have the buffer locked, so I/O has - * completed. So we can nail the buffer now. - */ - may_free = __dispose_buffer(jh, transaction); - goto zap_buffer; - } - /* - * The buffer is committing, we simply cannot touch - * it. If the page is straddling i_size we have to wait - * for commit and try again. - */ - if (partial_page) { - tid_t tid = journal->j_committing_transaction->t_tid; - - journal_put_journal_head(jh); - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - spin_unlock(&journal->j_state_lock); - unlock_buffer(bh); - log_wait_commit(journal, tid); - lock_buffer(bh); - goto retry; - } - /* - * OK, buffer won't be reachable after truncate. We just set - * j_next_transaction to the running transaction (if there is - * one) and mark buffer as freed so that commit code knows it - * should clear dirty bits when it is done with the buffer. - */ - set_buffer_freed(bh); - if (journal->j_running_transaction && buffer_jbddirty(bh)) - jh->b_next_transaction = journal->j_running_transaction; - journal_put_journal_head(jh); - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - spin_unlock(&journal->j_state_lock); - return 0; - } else { - /* Good, the buffer belongs to the running transaction. - * We are writing our own transaction's data, not any - * previous one's, so it is safe to throw it away - * (remember that we expect the filesystem to have set - * i_size already for this truncate so recovery will not - * expose the disk blocks we are discarding here.) */ - J_ASSERT_JH(jh, transaction == journal->j_running_transaction); - JBUFFER_TRACE(jh, "on running transaction"); - may_free = __dispose_buffer(jh, transaction); - } - -zap_buffer: - /* - * This is tricky. Although the buffer is truncated, it may be reused - * if blocksize < pagesize and it is attached to the page straddling - * EOF. Since the buffer might have been added to BJ_Forget list of the - * running transaction, journal_get_write_access() won't clear - * b_modified and credit accounting gets confused. So clear b_modified - * here. */ - jh->b_modified = 0; - journal_put_journal_head(jh); -zap_buffer_no_jh: - spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); - spin_unlock(&journal->j_state_lock); -zap_buffer_unlocked: - clear_buffer_dirty(bh); - J_ASSERT_BH(bh, !buffer_jbddirty(bh)); - clear_buffer_mapped(bh); - clear_buffer_req(bh); - clear_buffer_new(bh); - bh->b_bdev = NULL; - return may_free; -} - -/** - * void journal_invalidatepage() - invalidate a journal page - * @journal: journal to use for flush - * @page: page to flush - * @offset: offset of the range to invalidate - * @length: length of the range to invalidate - * - * Reap page buffers containing data in specified range in page. - */ -void journal_invalidatepage(journal_t *journal, - struct page *page, - unsigned int offset, - unsigned int length) -{ - struct buffer_head *head, *bh, *next; - unsigned int stop = offset + length; - unsigned int curr_off = 0; - int partial_page = (offset || length < PAGE_CACHE_SIZE); - int may_free = 1; - - if (!PageLocked(page)) - BUG(); - if (!page_has_buffers(page)) - return; - - BUG_ON(stop > PAGE_CACHE_SIZE || stop < length); - - /* We will potentially be playing with lists other than just the - * data lists (especially for journaled data mode), so be - * cautious in our locking. */ - - head = bh = page_buffers(page); - do { - unsigned int next_off = curr_off + bh->b_size; - next = bh->b_this_page; - - if (next_off > stop) - return; - - if (offset <= curr_off) { - /* This block is wholly outside the truncation point */ - lock_buffer(bh); - may_free &= journal_unmap_buffer(journal, bh, - partial_page); - unlock_buffer(bh); - } - curr_off = next_off; - bh = next; - - } while (bh != head); - - if (!partial_page) { - if (may_free && try_to_free_buffers(page)) - J_ASSERT(!page_has_buffers(page)); - } -} - -/* - * File a buffer on the given transaction list. - */ -void __journal_file_buffer(struct journal_head *jh, - transaction_t *transaction, int jlist) -{ - struct journal_head **list = NULL; - int was_dirty = 0; - struct buffer_head *bh = jh2bh(jh); - - J_ASSERT_JH(jh, jbd_is_locked_bh_state(bh)); - assert_spin_locked(&transaction->t_journal->j_list_lock); - - J_ASSERT_JH(jh, jh->b_jlist < BJ_Types); - J_ASSERT_JH(jh, jh->b_transaction == transaction || - jh->b_transaction == NULL); - - if (jh->b_transaction && jh->b_jlist == jlist) - return; - - if (jlist == BJ_Metadata || jlist == BJ_Reserved || - jlist == BJ_Shadow || jlist == BJ_Forget) { - /* - * For metadata buffers, we track dirty bit in buffer_jbddirty - * instead of buffer_dirty. We should not see a dirty bit set - * here because we clear it in do_get_write_access but e.g. - * tune2fs can modify the sb and set the dirty bit at any time - * so we try to gracefully handle that. - */ - if (buffer_dirty(bh)) - warn_dirty_buffer(bh); - if (test_clear_buffer_dirty(bh) || - test_clear_buffer_jbddirty(bh)) - was_dirty = 1; - } - - if (jh->b_transaction) - __journal_temp_unlink_buffer(jh); - else - journal_grab_journal_head(bh); - jh->b_transaction = transaction; - - switch (jlist) { - case BJ_None: - J_ASSERT_JH(jh, !jh->b_committed_data); - J_ASSERT_JH(jh, !jh->b_frozen_data); - return; - case BJ_SyncData: - list = &transaction->t_sync_datalist; - break; - case BJ_Metadata: - transaction->t_nr_buffers++; - list = &transaction->t_buffers; - break; - case BJ_Forget: - list = &transaction->t_forget; - break; - case BJ_IO: - list = &transaction->t_iobuf_list; - break; - case BJ_Shadow: - list = &transaction->t_shadow_list; - break; - case BJ_LogCtl: - list = &transaction->t_log_list; - break; - case BJ_Reserved: - list = &transaction->t_reserved_list; - break; - case BJ_Locked: - list = &transaction->t_locked_list; - break; - } - - __blist_add_buffer(list, jh); - jh->b_jlist = jlist; - - if (was_dirty) - set_buffer_jbddirty(bh); -} - -void journal_file_buffer(struct journal_head *jh, - transaction_t *transaction, int jlist) -{ - jbd_lock_bh_state(jh2bh(jh)); - spin_lock(&transaction->t_journal->j_list_lock); - __journal_file_buffer(jh, transaction, jlist); - spin_unlock(&transaction->t_journal->j_list_lock); - jbd_unlock_bh_state(jh2bh(jh)); -} - -/* - * Remove a buffer from its current buffer list in preparation for - * dropping it from its current transaction entirely. If the buffer has - * already started to be used by a subsequent transaction, refile the - * buffer on that transaction's metadata list. - * - * Called under j_list_lock - * Called under jbd_lock_bh_state(jh2bh(jh)) - * - * jh and bh may be already free when this function returns - */ -void __journal_refile_buffer(struct journal_head *jh) -{ - int was_dirty, jlist; - struct buffer_head *bh = jh2bh(jh); - - J_ASSERT_JH(jh, jbd_is_locked_bh_state(bh)); - if (jh->b_transaction) - assert_spin_locked(&jh->b_transaction->t_journal->j_list_lock); - - /* If the buffer is now unused, just drop it. */ - if (jh->b_next_transaction == NULL) { - __journal_unfile_buffer(jh); - return; - } - - /* - * It has been modified by a later transaction: add it to the new - * transaction's metadata list. - */ - - was_dirty = test_clear_buffer_jbddirty(bh); - __journal_temp_unlink_buffer(jh); - /* - * We set b_transaction here because b_next_transaction will inherit - * our jh reference and thus __journal_file_buffer() must not take a - * new one. - */ - jh->b_transaction = jh->b_next_transaction; - jh->b_next_transaction = NULL; - if (buffer_freed(bh)) - jlist = BJ_Forget; - else if (jh->b_modified) - jlist = BJ_Metadata; - else - jlist = BJ_Reserved; - __journal_file_buffer(jh, jh->b_transaction, jlist); - J_ASSERT_JH(jh, jh->b_transaction->t_state == T_RUNNING); - - if (was_dirty) - set_buffer_jbddirty(bh); -} - -/* - * __journal_refile_buffer() with necessary locking added. We take our bh - * reference so that we can safely unlock bh. - * - * The jh and bh may be freed by this call. - */ -void journal_refile_buffer(journal_t *journal, struct journal_head *jh) -{ - struct buffer_head *bh = jh2bh(jh); - - /* Get reference so that buffer cannot be freed before we unlock it */ - get_bh(bh); - jbd_lock_bh_state(bh); - spin_lock(&journal->j_list_lock); - __journal_refile_buffer(jh); - jbd_unlock_bh_state(bh); - spin_unlock(&journal->j_list_lock); - __brelse(bh); -} diff --git a/include/linux/jbd.h b/include/linux/jbd.h deleted file mode 100644 index d326152..0000000 --- a/include/linux/jbd.h +++ /dev/null @@ -1,1047 +0,0 @@ -/* - * linux/include/linux/jbd.h - * - * Written by Stephen C. Tweedie <sct@redhat.com> - * - * Copyright 1998-2000 Red Hat, Inc --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Definitions for transaction data structures for the buffer cache - * filesystem journaling support. - */ - -#ifndef _LINUX_JBD_H -#define _LINUX_JBD_H - -/* Allow this file to be included directly into e2fsprogs */ -#ifndef __KERNEL__ -#include "jfs_compat.h" -#define JFS_DEBUG -#define jfs_debug jbd_debug -#else - -#include <linux/types.h> -#include <linux/buffer_head.h> -#include <linux/journal-head.h> -#include <linux/stddef.h> -#include <linux/mutex.h> -#include <linux/timer.h> -#include <linux/lockdep.h> -#include <linux/slab.h> - -#define journal_oom_retry 1 - -/* - * Define JBD_PARANOID_IOFAIL to cause a kernel BUG() if ext3 finds - * certain classes of error which can occur due to failed IOs. Under - * normal use we want ext3 to continue after such errors, because - * hardware _can_ fail, but for debugging purposes when running tests on - * known-good hardware we may want to trap these errors. - */ -#undef JBD_PARANOID_IOFAIL - -/* - * The default maximum commit age, in seconds. - */ -#define JBD_DEFAULT_MAX_COMMIT_AGE 5 - -#ifdef CONFIG_JBD_DEBUG -/* - * Define JBD_EXPENSIVE_CHECKING to enable more expensive internal - * consistency checks. By default we don't do this unless - * CONFIG_JBD_DEBUG is on. - */ -#define JBD_EXPENSIVE_CHECKING -extern u8 journal_enable_debug; - -void __jbd_debug(int level, const char *file, const char *func, - unsigned int line, const char *fmt, ...); - -#define jbd_debug(n, fmt, a...) \ - __jbd_debug((n), __FILE__, __func__, __LINE__, (fmt), ##a) -#else -#define jbd_debug(n, fmt, a...) /**/ -#endif - -static inline void *jbd_alloc(size_t size, gfp_t flags) -{ - return (void *)__get_free_pages(flags, get_order(size)); -} - -static inline void jbd_free(void *ptr, size_t size) -{ - free_pages((unsigned long)ptr, get_order(size)); -} - -#define JFS_MIN_JOURNAL_BLOCKS 1024 - - -/** - * typedef handle_t - The handle_t type represents a single atomic update being performed by some process. - * - * All filesystem modifications made by the process go - * through this handle. Recursive operations (such as quota operations) - * are gathered into a single update. - * - * The buffer credits field is used to account for journaled buffers - * being modified by the running process. To ensure that there is - * enough log space for all outstanding operations, we need to limit the - * number of outstanding buffers possible at any time. When the - * operation completes, any buffer credits not used are credited back to - * the transaction, so that at all times we know how many buffers the - * outstanding updates on a transaction might possibly touch. - * - * This is an opaque datatype. - **/ -typedef struct handle_s handle_t; /* Atomic operation type */ - - -/** - * typedef journal_t - The journal_t maintains all of the journaling state information for a single filesystem. - * - * journal_t is linked to from the fs superblock structure. - * - * We use the journal_t to keep track of all outstanding transaction - * activity on the filesystem, and to manage the state of the log - * writing process. - * - * This is an opaque datatype. - **/ -typedef struct journal_s journal_t; /* Journal control structure */ -#endif - -/* - * Internal structures used by the logging mechanism: - */ - -#define JFS_MAGIC_NUMBER 0xc03b3998U /* The first 4 bytes of /dev/random! */ - -/* - * On-disk structures - */ - -/* - * Descriptor block types: - */ - -#define JFS_DESCRIPTOR_BLOCK 1 -#define JFS_COMMIT_BLOCK 2 -#define JFS_SUPERBLOCK_V1 3 -#define JFS_SUPERBLOCK_V2 4 -#define JFS_REVOKE_BLOCK 5 - -/* - * Standard header for all descriptor blocks: - */ -typedef struct journal_header_s -{ - __be32 h_magic; - __be32 h_blocktype; - __be32 h_sequence; -} journal_header_t; - - -/* - * The block tag: used to describe a single buffer in the journal - */ -typedef struct journal_block_tag_s -{ - __be32 t_blocknr; /* The on-disk block number */ - __be32 t_flags; /* See below */ -} journal_block_tag_t; - -/* - * The revoke descriptor: used on disk to describe a series of blocks to - * be revoked from the log - */ -typedef struct journal_revoke_header_s -{ - journal_header_t r_header; - __be32 r_count; /* Count of bytes used in the block */ -} journal_revoke_header_t; - - -/* Definitions for the journal tag flags word: */ -#define JFS_FLAG_ESCAPE 1 /* on-disk block is escaped */ -#define JFS_FLAG_SAME_UUID 2 /* block has same uuid as previous */ -#define JFS_FLAG_DELETED 4 /* block deleted by this transaction */ -#define JFS_FLAG_LAST_TAG 8 /* last tag in this descriptor block */ - - -/* - * The journal superblock. All fields are in big-endian byte order. - */ -typedef struct journal_superblock_s -{ -/* 0x0000 */ - journal_header_t s_header; - -/* 0x000C */ - /* Static information describing the journal */ - __be32 s_blocksize; /* journal device blocksize */ - __be32 s_maxlen; /* total blocks in journal file */ - __be32 s_first; /* first block of log information */ - -/* 0x0018 */ - /* Dynamic information describing the current state of the log */ - __be32 s_sequence; /* first commit ID expected in log */ - __be32 s_start; /* blocknr of start of log */ - -/* 0x0020 */ - /* Error value, as set by journal_abort(). */ - __be32 s_errno; - -/* 0x0024 */ - /* Remaining fields are only valid in a version-2 superblock */ - __be32 s_feature_compat; /* compatible feature set */ - __be32 s_feature_incompat; /* incompatible feature set */ - __be32 s_feature_ro_compat; /* readonly-compatible feature set */ -/* 0x0030 */ - __u8 s_uuid[16]; /* 128-bit uuid for journal */ - -/* 0x0040 */ - __be32 s_nr_users; /* Nr of filesystems sharing log */ - - __be32 s_dynsuper; /* Blocknr of dynamic superblock copy*/ - -/* 0x0048 */ - __be32 s_max_transaction; /* Limit of journal blocks per trans.*/ - __be32 s_max_trans_data; /* Limit of data blocks per trans. */ - -/* 0x0050 */ - __u32 s_padding[44]; - -/* 0x0100 */ - __u8 s_users[16*48]; /* ids of all fs'es sharing the log */ -/* 0x0400 */ -} journal_superblock_t; - -#define JFS_HAS_COMPAT_FEATURE(j,mask) \ - ((j)->j_format_version >= 2 && \ - ((j)->j_superblock->s_feature_compat & cpu_to_be32((mask)))) -#define JFS_HAS_RO_COMPAT_FEATURE(j,mask) \ - ((j)->j_format_version >= 2 && \ - ((j)->j_superblock->s_feature_ro_compat & cpu_to_be32((mask)))) -#define JFS_HAS_INCOMPAT_FEATURE(j,mask) \ - ((j)->j_format_version >= 2 && \ - ((j)->j_superblock->s_feature_incompat & cpu_to_be32((mask)))) - -#define JFS_FEATURE_INCOMPAT_REVOKE 0x00000001 - -/* Features known to this kernel version: */ -#define JFS_KNOWN_COMPAT_FEATURES 0 -#define JFS_KNOWN_ROCOMPAT_FEATURES 0 -#define JFS_KNOWN_INCOMPAT_FEATURES JFS_FEATURE_INCOMPAT_REVOKE - -#ifdef __KERNEL__ - -#include <linux/fs.h> -#include <linux/sched.h> - -enum jbd_state_bits { - BH_JBD /* Has an attached ext3 journal_head */ - = BH_PrivateStart, - BH_JWrite, /* Being written to log (@@@ DEBUGGING) */ - BH_Freed, /* Has been freed (truncated) */ - BH_Revoked, /* Has been revoked from the log */ - BH_RevokeValid, /* Revoked flag is valid */ - BH_JBDDirty, /* Is dirty but journaled */ - BH_State, /* Pins most journal_head state */ - BH_JournalHead, /* Pins bh->b_private and jh->b_bh */ - BH_Unshadow, /* Dummy bit, for BJ_Shadow wakeup filtering */ - BH_JBDPrivateStart, /* First bit available for private use by FS */ -}; - -BUFFER_FNS(JBD, jbd) -BUFFER_FNS(JWrite, jwrite) -BUFFER_FNS(JBDDirty, jbddirty) -TAS_BUFFER_FNS(JBDDirty, jbddirty) -BUFFER_FNS(Revoked, revoked) -TAS_BUFFER_FNS(Revoked, revoked) -BUFFER_FNS(RevokeValid, revokevalid) -TAS_BUFFER_FNS(RevokeValid, revokevalid) -BUFFER_FNS(Freed, freed) - -#include <linux/jbd_common.h> - -#define J_ASSERT(assert) BUG_ON(!(assert)) - -#define J_ASSERT_BH(bh, expr) J_ASSERT(expr) -#define J_ASSERT_JH(jh, expr) J_ASSERT(expr) - -#if defined(JBD_PARANOID_IOFAIL) -#define J_EXPECT(expr, why...) J_ASSERT(expr) -#define J_EXPECT_BH(bh, expr, why...) J_ASSERT_BH(bh, expr) -#define J_EXPECT_JH(jh, expr, why...) J_ASSERT_JH(jh, expr) -#else -#define __journal_expect(expr, why...) \ - ({ \ - int val = (expr); \ - if (!val) { \ - printk(KERN_ERR \ - "EXT3-fs unexpected failure: %s;\n",# expr); \ - printk(KERN_ERR why "\n"); \ - } \ - val; \ - }) -#define J_EXPECT(expr, why...) __journal_expect(expr, ## why) -#define J_EXPECT_BH(bh, expr, why...) __journal_expect(expr, ## why) -#define J_EXPECT_JH(jh, expr, why...) __journal_expect(expr, ## why) -#endif - -struct jbd_revoke_table_s; - -/** - * struct handle_s - this is the concrete type associated with handle_t. - * @h_transaction: Which compound transaction is this update a part of? - * @h_buffer_credits: Number of remaining buffers we are allowed to dirty. - * @h_ref: Reference count on this handle - * @h_err: Field for caller's use to track errors through large fs operations - * @h_sync: flag for sync-on-close - * @h_jdata: flag to force data journaling - * @h_aborted: flag indicating fatal error on handle - * @h_lockdep_map: lockdep info for debugging lock problems - */ -struct handle_s -{ - /* Which compound transaction is this update a part of? */ - transaction_t *h_transaction; - - /* Number of remaining buffers we are allowed to dirty: */ - int h_buffer_credits; - - /* Reference count on this handle */ - int h_ref; - - /* Field for caller's use to track errors through large fs */ - /* operations */ - int h_err; - - /* Flags [no locking] */ - unsigned int h_sync: 1; /* sync-on-close */ - unsigned int h_jdata: 1; /* force data journaling */ - unsigned int h_aborted: 1; /* fatal error on handle */ - -#ifdef CONFIG_DEBUG_LOCK_ALLOC - struct lockdep_map h_lockdep_map; -#endif -}; - - -/* The transaction_t type is the guts of the journaling mechanism. It - * tracks a compound transaction through its various states: - * - * RUNNING: accepting new updates - * LOCKED: Updates still running but we don't accept new ones - * RUNDOWN: Updates are tidying up but have finished requesting - * new buffers to modify (state not used for now) - * FLUSH: All updates complete, but we are still writing to disk - * COMMIT: All data on disk, writing commit record - * FINISHED: We still have to keep the transaction for checkpointing. - * - * The transaction keeps track of all of the buffers modified by a - * running transaction, and all of the buffers committed but not yet - * flushed to home for finished transactions. - */ - -/* - * Lock ranking: - * - * j_list_lock - * ->jbd_lock_bh_journal_head() (This is "innermost") - * - * j_state_lock - * ->jbd_lock_bh_state() - * - * jbd_lock_bh_state() - * ->j_list_lock - * - * j_state_lock - * ->t_handle_lock - * - * j_state_lock - * ->j_list_lock (journal_unmap_buffer) - * - */ - -struct transaction_s -{ - /* Pointer to the journal for this transaction. [no locking] */ - journal_t *t_journal; - - /* Sequence number for this transaction [no locking] */ - tid_t t_tid; - - /* - * Transaction's current state - * [no locking - only kjournald alters this] - * [j_list_lock] guards transition of a transaction into T_FINISHED - * state and subsequent call of __journal_drop_transaction() - * FIXME: needs barriers - * KLUDGE: [use j_state_lock] - */ - enum { - T_RUNNING, - T_LOCKED, - T_FLUSH, - T_COMMIT, - T_COMMIT_RECORD, - T_FINISHED - } t_state; - - /* - * Where in the log does this transaction's commit start? [no locking] - */ - unsigned int t_log_start; - - /* Number of buffers on the t_buffers list [j_list_lock] */ - int t_nr_buffers; - - /* - * Doubly-linked circular list of all buffers reserved but not yet - * modified by this transaction [j_list_lock] - */ - struct journal_head *t_reserved_list; - - /* - * Doubly-linked circular list of all buffers under writeout during - * commit [j_list_lock] - */ - struct journal_head *t_locked_list; - - /* - * Doubly-linked circular list of all metadata buffers owned by this - * transaction [j_list_lock] - */ - struct journal_head *t_buffers; - - /* - * Doubly-linked circular list of all data buffers still to be - * flushed before this transaction can be committed [j_list_lock] - */ - struct journal_head *t_sync_datalist; - - /* - * Doubly-linked circular list of all forget buffers (superseded - * buffers which we can un-checkpoint once this transaction commits) - * [j_list_lock] - */ - struct journal_head *t_forget; - - /* - * Doubly-linked circular list of all buffers still to be flushed before - * this transaction can be checkpointed. [j_list_lock] - */ - struct journal_head *t_checkpoint_list; - - /* - * Doubly-linked circular list of all buffers submitted for IO while - * checkpointing. [j_list_lock] - */ - struct journal_head *t_checkpoint_io_list; - - /* - * Doubly-linked circular list of temporary buffers currently undergoing - * IO in the log [j_list_lock] - */ - struct journal_head *t_iobuf_list; - - /* - * Doubly-linked circular list of metadata buffers being shadowed by log - * IO. The IO buffers on the iobuf list and the shadow buffers on this - * list match each other one for one at all times. [j_list_lock] - */ - struct journal_head *t_shadow_list; - - /* - * Doubly-linked circular list of control buffers being written to the - * log. [j_list_lock] - */ - struct journal_head *t_log_list; - - /* - * Protects info related to handles - */ - spinlock_t t_handle_lock; - - /* - * Number of outstanding updates running on this transaction - * [t_handle_lock] - */ - int t_updates; - - /* - * Number of buffers reserved for use by all handles in this transaction - * handle but not yet modified. [t_handle_lock] - */ - int t_outstanding_credits; - - /* - * Forward and backward links for the circular list of all transactions - * awaiting checkpoint. [j_list_lock] - */ - transaction_t *t_cpnext, *t_cpprev; - - /* - * When will the transaction expire (become due for commit), in jiffies? - * [no locking] - */ - unsigned long t_expires; - - /* - * When this transaction started, in nanoseconds [no locking] - */ - ktime_t t_start_time; - - /* - * How many handles used this transaction? [t_handle_lock] - */ - int t_handle_count; -}; - -/** - * struct journal_s - this is the concrete type associated with journal_t. - * @j_flags: General journaling state flags - * @j_errno: Is there an outstanding uncleared error on the journal (from a - * prior abort)? - * @j_sb_buffer: First part of superblock buffer - * @j_superblock: Second part of superblock buffer - * @j_format_version: Version of the superblock format - * @j_state_lock: Protect the various scalars in the journal - * @j_barrier_count: Number of processes waiting to create a barrier lock - * @j_running_transaction: The current running transaction.. - * @j_committing_transaction: the transaction we are pushing to disk - * @j_checkpoint_transactions: a linked circular list of all transactions - * waiting for checkpointing - * @j_wait_transaction_locked: Wait queue for waiting for a locked transaction - * to start committing, or for a barrier lock to be released - * @j_wait_logspace: Wait queue for waiting for checkpointing to complete - * @j_wait_done_commit: Wait queue for waiting for commit to complete - * @j_wait_checkpoint: Wait queue to trigger checkpointing - * @j_wait_commit: Wait queue to trigger commit - * @j_wait_updates: Wait queue to wait for updates to complete - * @j_checkpoint_mutex: Mutex for locking against concurrent checkpoints - * @j_head: Journal head - identifies the first unused block in the journal - * @j_tail: Journal tail - identifies the oldest still-used block in the - * journal. - * @j_free: Journal free - how many free blocks are there in the journal? - * @j_first: The block number of the first usable block - * @j_last: The block number one beyond the last usable block - * @j_dev: Device where we store the journal - * @j_blocksize: blocksize for the location where we store the journal. - * @j_blk_offset: starting block offset for into the device where we store the - * journal - * @j_fs_dev: Device which holds the client fs. For internal journal this will - * be equal to j_dev - * @j_maxlen: Total maximum capacity of the journal region on disk. - * @j_list_lock: Protects the buffer lists and internal buffer state. - * @j_inode: Optional inode where we store the journal. If present, all journal - * block numbers are mapped into this inode via bmap(). - * @j_tail_sequence: Sequence number of the oldest transaction in the log - * @j_transaction_sequence: Sequence number of the next transaction to grant - * @j_commit_sequence: Sequence number of the most recently committed - * transaction - * @j_commit_request: Sequence number of the most recent transaction wanting - * commit - * @j_commit_waited: Sequence number of the most recent transaction someone - * is waiting for to commit. - * @j_uuid: Uuid of client object. - * @j_task: Pointer to the current commit thread for this journal - * @j_max_transaction_buffers: Maximum number of metadata buffers to allow in a - * single compound commit transaction - * @j_commit_interval: What is the maximum transaction lifetime before we begin - * a commit? - * @j_commit_timer: The timer used to wakeup the commit thread - * @j_revoke_lock: Protect the revoke table - * @j_revoke: The revoke table - maintains the list of revoked blocks in the - * current transaction. - * @j_revoke_table: alternate revoke tables for j_revoke - * @j_wbuf: array of buffer_heads for journal_commit_transaction - * @j_wbufsize: maximum number of buffer_heads allowed in j_wbuf, the - * number that will fit in j_blocksize - * @j_last_sync_writer: most recent pid which did a synchronous write - * @j_average_commit_time: the average amount of time in nanoseconds it - * takes to commit a transaction to the disk. - * @j_private: An opaque pointer to fs-private information. - */ - -struct journal_s -{ - /* General journaling state flags [j_state_lock] */ - unsigned long j_flags; - - /* - * Is there an outstanding uncleared error on the journal (from a prior - * abort)? [j_state_lock] - */ - int j_errno; - - /* The superblock buffer */ - struct buffer_head *j_sb_buffer; - journal_superblock_t *j_superblock; - - /* Version of the superblock format */ - int j_format_version; - - /* - * Protect the various scalars in the journal - */ - spinlock_t j_state_lock; - - /* - * Number of processes waiting to create a barrier lock [j_state_lock] - */ - int j_barrier_count; - - /* - * Transactions: The current running transaction... - * [j_state_lock] [caller holding open handle] - */ - transaction_t *j_running_transaction; - - /* - * the transaction we are pushing to disk - * [j_state_lock] [caller holding open handle] - */ - transaction_t *j_committing_transaction; - - /* - * ... and a linked circular list of all transactions waiting for - * checkpointing. [j_list_lock] - */ - transaction_t *j_checkpoint_transactions; - - /* - * Wait queue for waiting for a locked transaction to start committing, - * or for a barrier lock to be released - */ - wait_queue_head_t j_wait_transaction_locked; - - /* Wait queue for waiting for checkpointing to complete */ - wait_queue_head_t j_wait_logspace; - - /* Wait queue for waiting for commit to complete */ - wait_queue_head_t j_wait_done_commit; - - /* Wait queue to trigger checkpointing */ - wait_queue_head_t j_wait_checkpoint; - - /* Wait queue to trigger commit */ - wait_queue_head_t j_wait_commit; - - /* Wait queue to wait for updates to complete */ - wait_queue_head_t j_wait_updates; - - /* Semaphore for locking against concurrent checkpoints */ - struct mutex j_checkpoint_mutex; - - /* - * Journal head: identifies the first unused block in the journal. - * [j_state_lock] - */ - unsigned int j_head; - - /* - * Journal tail: identifies the oldest still-used block in the journal. - * [j_state_lock] - */ - unsigned int j_tail; - - /* - * Journal free: how many free blocks are there in the journal? - * [j_state_lock] - */ - unsigned int j_free; - - /* - * Journal start and end: the block numbers of the first usable block - * and one beyond the last usable block in the journal. [j_state_lock] - */ - unsigned int j_first; - unsigned int j_last; - - /* - * Device, blocksize and starting block offset for the location where we - * store the journal. - */ - struct block_device *j_dev; - int j_blocksize; - unsigned int j_blk_offset; - - /* - * Device which holds the client fs. For internal journal this will be - * equal to j_dev. - */ - struct block_device *j_fs_dev; - - /* Total maximum capacity of the journal region on disk. */ - unsigned int j_maxlen; - - /* - * Protects the buffer lists and internal buffer state. - */ - spinlock_t j_list_lock; - - /* Optional inode where we store the journal. If present, all */ - /* journal block numbers are mapped into this inode via */ - /* bmap(). */ - struct inode *j_inode; - - /* - * Sequence number of the oldest transaction in the log [j_state_lock] - */ - tid_t j_tail_sequence; - - /* - * Sequence number of the next transaction to grant [j_state_lock] - */ - tid_t j_transaction_sequence; - - /* - * Sequence number of the most recently committed transaction - * [j_state_lock]. - */ - tid_t j_commit_sequence; - - /* - * Sequence number of the most recent transaction wanting commit - * [j_state_lock] - */ - tid_t j_commit_request; - - /* - * Sequence number of the most recent transaction someone is waiting - * for to commit. - * [j_state_lock] - */ - tid_t j_commit_waited; - - /* - * Journal uuid: identifies the object (filesystem, LVM volume etc) - * backed by this journal. This will eventually be replaced by an array - * of uuids, allowing us to index multiple devices within a single - * journal and to perform atomic updates across them. - */ - __u8 j_uuid[16]; - - /* Pointer to the current commit thread for this journal */ - struct task_struct *j_task; - - /* - * Maximum number of metadata buffers to allow in a single compound - * commit transaction - */ - int j_max_transaction_buffers; - - /* - * What is the maximum transaction lifetime before we begin a commit? - */ - unsigned long j_commit_interval; - - /* The timer used to wakeup the commit thread: */ - struct timer_list j_commit_timer; - - /* - * The revoke table: maintains the list of revoked blocks in the - * current transaction. [j_revoke_lock] - */ - spinlock_t j_revoke_lock; - struct jbd_revoke_table_s *j_revoke; - struct jbd_revoke_table_s *j_revoke_table[2]; - - /* - * array of bhs for journal_commit_transaction - */ - struct buffer_head **j_wbuf; - int j_wbufsize; - - /* - * this is the pid of the last person to run a synchronous operation - * through the journal. - */ - pid_t j_last_sync_writer; - - /* - * the average amount of time in nanoseconds it takes to commit a - * transaction to the disk. [j_state_lock] - */ - u64 j_average_commit_time; - - /* - * An opaque pointer to fs-private information. ext3 puts its - * superblock pointer here - */ - void *j_private; -}; - -/* - * Journal flag definitions - */ -#define JFS_UNMOUNT 0x001 /* Journal thread is being destroyed */ -#define JFS_ABORT 0x002 /* Journaling has been aborted for errors. */ -#define JFS_ACK_ERR 0x004 /* The errno in the sb has been acked */ -#define JFS_FLUSHED 0x008 /* The journal superblock has been flushed */ -#define JFS_LOADED 0x010 /* The journal superblock has been loaded */ -#define JFS_BARRIER 0x020 /* Use IDE barriers */ -#define JFS_ABORT_ON_SYNCDATA_ERR 0x040 /* Abort the journal on file - * data write error in ordered - * mode */ - -/* - * Function declarations for the journaling transaction and buffer - * management - */ - -/* Filing buffers */ -extern void journal_unfile_buffer(journal_t *, struct journal_head *); -extern void __journal_unfile_buffer(struct journal_head *); -extern void __journal_refile_buffer(struct journal_head *); -extern void journal_refile_buffer(journal_t *, struct journal_head *); -extern void __journal_file_buffer(struct journal_head *, transaction_t *, int); -extern void __journal_free_buffer(struct journal_head *bh); -extern void journal_file_buffer(struct journal_head *, transaction_t *, int); -extern void __journal_clean_data_list(transaction_t *transaction); - -/* Log buffer allocation */ -extern struct journal_head * journal_get_descriptor_buffer(journal_t *); -int journal_next_log_block(journal_t *, unsigned int *); - -/* Commit management */ -extern void journal_commit_transaction(journal_t *); - -/* Checkpoint list management */ -int __journal_clean_checkpoint_list(journal_t *journal); -int __journal_remove_checkpoint(struct journal_head *); -void __journal_insert_checkpoint(struct journal_head *, transaction_t *); - -/* Buffer IO */ -extern int -journal_write_metadata_buffer(transaction_t *transaction, - struct journal_head *jh_in, - struct journal_head **jh_out, - unsigned int blocknr); - -/* Transaction locking */ -extern void __wait_on_journal (journal_t *); - -/* - * Journal locking. - * - * We need to lock the journal during transaction state changes so that nobody - * ever tries to take a handle on the running transaction while we are in the - * middle of moving it to the commit phase. j_state_lock does this. - * - * Note that the locking is completely interrupt unsafe. We never touch - * journal structures from interrupts. - */ - -static inline handle_t *journal_current_handle(void) -{ - return current->journal_info; -} - -/* The journaling code user interface: - * - * Create and destroy handles - * Register buffer modifications against the current transaction. - */ - -extern handle_t *journal_start(journal_t *, int nblocks); -extern int journal_restart (handle_t *, int nblocks); -extern int journal_extend (handle_t *, int nblocks); -extern int journal_get_write_access(handle_t *, struct buffer_head *); -extern int journal_get_create_access (handle_t *, struct buffer_head *); -extern int journal_get_undo_access(handle_t *, struct buffer_head *); -extern int journal_dirty_data (handle_t *, struct buffer_head *); -extern int journal_dirty_metadata (handle_t *, struct buffer_head *); -extern void journal_release_buffer (handle_t *, struct buffer_head *); -extern int journal_forget (handle_t *, struct buffer_head *); -extern void journal_sync_buffer (struct buffer_head *); -extern void journal_invalidatepage(journal_t *, - struct page *, unsigned int, unsigned int); -extern int journal_try_to_free_buffers(journal_t *, struct page *, gfp_t); -extern int journal_stop(handle_t *); -extern int journal_flush (journal_t *); -extern void journal_lock_updates (journal_t *); -extern void journal_unlock_updates (journal_t *); - -extern journal_t * journal_init_dev(struct block_device *bdev, - struct block_device *fs_dev, - int start, int len, int bsize); -extern journal_t * journal_init_inode (struct inode *); -extern int journal_update_format (journal_t *); -extern int journal_check_used_features - (journal_t *, unsigned long, unsigned long, unsigned long); -extern int journal_check_available_features - (journal_t *, unsigned long, unsigned long, unsigned long); -extern int journal_set_features - (journal_t *, unsigned long, unsigned long, unsigned long); -extern int journal_create (journal_t *); -extern int journal_load (journal_t *journal); -extern int journal_destroy (journal_t *); -extern int journal_recover (journal_t *journal); -extern int journal_wipe (journal_t *, int); -extern int journal_skip_recovery (journal_t *); -extern void journal_update_sb_log_tail (journal_t *, tid_t, unsigned int, - int); -extern void journal_abort (journal_t *, int); -extern int journal_errno (journal_t *); -extern void journal_ack_err (journal_t *); -extern int journal_clear_err (journal_t *); -extern int journal_bmap(journal_t *, unsigned int, unsigned int *); -extern int journal_force_commit(journal_t *); - -/* - * journal_head management - */ -struct journal_head *journal_add_journal_head(struct buffer_head *bh); -struct journal_head *journal_grab_journal_head(struct buffer_head *bh); -void journal_put_journal_head(struct journal_head *jh); - -/* - * handle management - */ -extern struct kmem_cache *jbd_handle_cache; - -static inline handle_t *jbd_alloc_handle(gfp_t gfp_flags) -{ - return kmem_cache_zalloc(jbd_handle_cache, gfp_flags); -} - -static inline void jbd_free_handle(handle_t *handle) -{ - kmem_cache_free(jbd_handle_cache, handle); -} - -/* Primary revoke support */ -#define JOURNAL_REVOKE_DEFAULT_HASH 256 -extern int journal_init_revoke(journal_t *, int); -extern void journal_destroy_revoke_caches(void); -extern int journal_init_revoke_caches(void); - -extern void journal_destroy_revoke(journal_t *); -extern int journal_revoke (handle_t *, - unsigned int, struct buffer_head *); -extern int journal_cancel_revoke(handle_t *, struct journal_head *); -extern void journal_write_revoke_records(journal_t *, - transaction_t *, int); - -/* Recovery revoke support */ -extern int journal_set_revoke(journal_t *, unsigned int, tid_t); -extern int journal_test_revoke(journal_t *, unsigned int, tid_t); -extern void journal_clear_revoke(journal_t *); -extern void journal_switch_revoke_table(journal_t *journal); -extern void journal_clear_buffer_revoked_flags(journal_t *journal); - -/* - * The log thread user interface: - * - * Request space in the current transaction, and force transaction commit - * transitions on demand. - */ - -int __log_space_left(journal_t *); /* Called with journal locked */ -int log_start_commit(journal_t *journal, tid_t tid); -int __log_start_commit(journal_t *journal, tid_t tid); -int journal_start_commit(journal_t *journal, tid_t *tid); -int journal_force_commit_nested(journal_t *journal); -int log_wait_commit(journal_t *journal, tid_t tid); -int log_do_checkpoint(journal_t *journal); -int journal_trans_will_send_data_barrier(journal_t *journal, tid_t tid); - -void __log_wait_for_space(journal_t *journal); -extern void __journal_drop_transaction(journal_t *, transaction_t *); -extern int cleanup_journal_tail(journal_t *); - -/* - * is_journal_abort - * - * Simple test wrapper function to test the JFS_ABORT state flag. This - * bit, when set, indicates that we have had a fatal error somewhere, - * either inside the journaling layer or indicated to us by the client - * (eg. ext3), and that we and should not commit any further - * transactions. - */ - -static inline int is_journal_aborted(journal_t *journal) -{ - return journal->j_flags & JFS_ABORT; -} - -static inline int is_handle_aborted(handle_t *handle) -{ - if (handle->h_aborted) - return 1; - return is_journal_aborted(handle->h_transaction->t_journal); -} - -static inline void journal_abort_handle(handle_t *handle) -{ - handle->h_aborted = 1; -} - -#endif /* __KERNEL__ */ - -/* Comparison functions for transaction IDs: perform comparisons using - * modulo arithmetic so that they work over sequence number wraps. */ - -static inline int tid_gt(tid_t x, tid_t y) -{ - int difference = (x - y); - return (difference > 0); -} - -static inline int tid_geq(tid_t x, tid_t y) -{ - int difference = (x - y); - return (difference >= 0); -} - -extern int journal_blocks_per_page(struct inode *inode); - -/* - * Return the minimum number of blocks which must be free in the journal - * before a new transaction may be started. Must be called under j_state_lock. - */ -static inline int jbd_space_needed(journal_t *journal) -{ - int nblocks = journal->j_max_transaction_buffers; - if (journal->j_committing_transaction) - nblocks += journal->j_committing_transaction-> - t_outstanding_credits; - return nblocks; -} - -/* - * Definitions which augment the buffer_head layer - */ - -/* journaling buffer types */ -#define BJ_None 0 /* Not journaled */ -#define BJ_SyncData 1 /* Normal data: flush before commit */ -#define BJ_Metadata 2 /* Normal journaled metadata */ -#define BJ_Forget 3 /* Buffer superseded by this transaction */ -#define BJ_IO 4 /* Buffer is for temporary IO use */ -#define BJ_Shadow 5 /* Buffer contents being shadowed to the log */ -#define BJ_LogCtl 6 /* Buffer contains log descriptors */ -#define BJ_Reserved 7 /* Buffer is reserved for access by journal */ -#define BJ_Locked 8 /* Locked for I/O during commit */ -#define BJ_Types 9 - -extern int jbd_blocks_per_page(struct inode *inode); - -#ifdef __KERNEL__ - -#define buffer_trace_init(bh) do {} while (0) -#define print_buffer_fields(bh) do {} while (0) -#define print_buffer_trace(bh) do {} while (0) -#define BUFFER_TRACE(bh, info) do {} while (0) -#define BUFFER_TRACE2(bh, bh2, info) do {} while (0) -#define JBUFFER_TRACE(jh, info) do {} while (0) - -#endif /* __KERNEL__ */ - -#endif /* _LINUX_JBD_H */ diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index edb640a..ad4b286 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -29,6 +29,7 @@ #include <linux/mutex.h> #include <linux/timer.h> #include <linux/slab.h> +#include <linux/bit_spinlock.h> #include <crypto/hash.h> #endif @@ -336,7 +337,45 @@ BUFFER_FNS(Freed, freed) BUFFER_FNS(Shadow, shadow) BUFFER_FNS(Verified, verified) -#include <linux/jbd_common.h> +static inline struct buffer_head *jh2bh(struct journal_head *jh) +{ + return jh->b_bh; +} + +static inline struct journal_head *bh2jh(struct buffer_head *bh) +{ + return bh->b_private; +} + +static inline void jbd_lock_bh_state(struct buffer_head *bh) +{ + bit_spin_lock(BH_State, &bh->b_state); +} + +static inline int jbd_trylock_bh_state(struct buffer_head *bh) +{ + return bit_spin_trylock(BH_State, &bh->b_state); +} + +static inline int jbd_is_locked_bh_state(struct buffer_head *bh) +{ + return bit_spin_is_locked(BH_State, &bh->b_state); +} + +static inline void jbd_unlock_bh_state(struct buffer_head *bh) +{ + bit_spin_unlock(BH_State, &bh->b_state); +} + +static inline void jbd_lock_bh_journal_head(struct buffer_head *bh) +{ + bit_spin_lock(BH_JournalHead, &bh->b_state); +} + +static inline void jbd_unlock_bh_journal_head(struct buffer_head *bh) +{ + bit_spin_unlock(BH_JournalHead, &bh->b_state); +} #define J_ASSERT(assert) BUG_ON(!(assert)) diff --git a/include/linux/jbd_common.h b/include/linux/jbd_common.h deleted file mode 100644 index 3dc5343..0000000 --- a/include/linux/jbd_common.h +++ /dev/null @@ -1,46 +0,0 @@ -#ifndef _LINUX_JBD_STATE_H -#define _LINUX_JBD_STATE_H - -#include <linux/bit_spinlock.h> - -static inline struct buffer_head *jh2bh(struct journal_head *jh) -{ - return jh->b_bh; -} - -static inline struct journal_head *bh2jh(struct buffer_head *bh) -{ - return bh->b_private; -} - -static inline void jbd_lock_bh_state(struct buffer_head *bh) -{ - bit_spin_lock(BH_State, &bh->b_state); -} - -static inline int jbd_trylock_bh_state(struct buffer_head *bh) -{ - return bit_spin_trylock(BH_State, &bh->b_state); -} - -static inline int jbd_is_locked_bh_state(struct buffer_head *bh) -{ - return bit_spin_is_locked(BH_State, &bh->b_state); -} - -static inline void jbd_unlock_bh_state(struct buffer_head *bh) -{ - bit_spin_unlock(BH_State, &bh->b_state); -} - -static inline void jbd_lock_bh_journal_head(struct buffer_head *bh) -{ - bit_spin_lock(BH_JournalHead, &bh->b_state); -} - -static inline void jbd_unlock_bh_journal_head(struct buffer_head *bh) -{ - bit_spin_unlock(BH_JournalHead, &bh->b_state); -} - -#endif diff --git a/include/trace/events/ext3.h b/include/trace/events/ext3.h deleted file mode 100644 index fc733d2..0000000 --- a/include/trace/events/ext3.h +++ /dev/null @@ -1,866 +0,0 @@ -#undef TRACE_SYSTEM -#define TRACE_SYSTEM ext3 - -#if !defined(_TRACE_EXT3_H) || defined(TRACE_HEADER_MULTI_READ) -#define _TRACE_EXT3_H - -#include <linux/tracepoint.h> - -TRACE_EVENT(ext3_free_inode, - TP_PROTO(struct inode *inode), - - TP_ARGS(inode), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, ino ) - __field( umode_t, mode ) - __field( uid_t, uid ) - __field( gid_t, gid ) - __field( blkcnt_t, blocks ) - ), - - TP_fast_assign( - __entry->dev = inode->i_sb->s_dev; - __entry->ino = inode->i_ino; - __entry->mode = inode->i_mode; - __entry->uid = i_uid_read(inode); - __entry->gid = i_gid_read(inode); - __entry->blocks = inode->i_blocks; - ), - - TP_printk("dev %d,%d ino %lu mode 0%o uid %u gid %u blocks %lu", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - __entry->mode, __entry->uid, __entry->gid, - (unsigned long) __entry->blocks) -); - -TRACE_EVENT(ext3_request_inode, - TP_PROTO(struct inode *dir, int mode), - - TP_ARGS(dir, mode), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, dir ) - __field( umode_t, mode ) - ), - - TP_fast_assign( - __entry->dev = dir->i_sb->s_dev; - __entry->dir = dir->i_ino; - __entry->mode = mode; - ), - - TP_printk("dev %d,%d dir %lu mode 0%o", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->dir, __entry->mode) -); - -TRACE_EVENT(ext3_allocate_inode, - TP_PROTO(struct inode *inode, struct inode *dir, int mode), - - TP_ARGS(inode, dir, mode), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, ino ) - __field( ino_t, dir ) - __field( umode_t, mode ) - ), - - TP_fast_assign( - __entry->dev = inode->i_sb->s_dev; - __entry->ino = inode->i_ino; - __entry->dir = dir->i_ino; - __entry->mode = mode; - ), - - TP_printk("dev %d,%d ino %lu dir %lu mode 0%o", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - (unsigned long) __entry->dir, __entry->mode) -); - -TRACE_EVENT(ext3_evict_inode, - TP_PROTO(struct inode *inode), - - TP_ARGS(inode), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, ino ) - __field( int, nlink ) - ), - - TP_fast_assign( - __entry->dev = inode->i_sb->s_dev; - __entry->ino = inode->i_ino; - __entry->nlink = inode->i_nlink; - ), - - TP_printk("dev %d,%d ino %lu nlink %d", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, __entry->nlink) -); - -TRACE_EVENT(ext3_drop_inode, - TP_PROTO(struct inode *inode, int drop), - - TP_ARGS(inode, drop), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, ino ) - __field( int, drop ) - ), - - TP_fast_assign( - __entry->dev = inode->i_sb->s_dev; - __entry->ino = inode->i_ino; - __entry->drop = drop; - ), - - TP_printk("dev %d,%d ino %lu drop %d", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, __entry->drop) -); - -TRACE_EVENT(ext3_mark_inode_dirty, - TP_PROTO(struct inode *inode, unsigned long IP), - - TP_ARGS(inode, IP), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, ino ) - __field(unsigned long, ip ) - ), - - TP_fast_assign( - __entry->dev = inode->i_sb->s_dev; - __entry->ino = inode->i_ino; - __entry->ip = IP; - ), - - TP_printk("dev %d,%d ino %lu caller %pS", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, (void *)__entry->ip) -); - -TRACE_EVENT(ext3_write_begin, - TP_PROTO(struct inode *inode, loff_t pos, unsigned int len, - unsigned int flags), - - TP_ARGS(inode, pos, len, flags), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, ino ) - __field( loff_t, pos ) - __field( unsigned int, len ) - __field( unsigned int, flags ) - ), - - TP_fast_assign( - __entry->dev = inode->i_sb->s_dev; - __entry->ino = inode->i_ino; - __entry->pos = pos; - __entry->len = len; - __entry->flags = flags; - ), - - TP_printk("dev %d,%d ino %lu pos %llu len %u flags %u", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - (unsigned long long) __entry->pos, __entry->len, - __entry->flags) -); - -DECLARE_EVENT_CLASS(ext3__write_end, - TP_PROTO(struct inode *inode, loff_t pos, unsigned int len, - unsigned int copied), - - TP_ARGS(inode, pos, len, copied), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, ino ) - __field( loff_t, pos ) - __field( unsigned int, len ) - __field( unsigned int, copied ) - ), - - TP_fast_assign( - __entry->dev = inode->i_sb->s_dev; - __entry->ino = inode->i_ino; - __entry->pos = pos; - __entry->len = len; - __entry->copied = copied; - ), - - TP_printk("dev %d,%d ino %lu pos %llu len %u copied %u", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - (unsigned long long) __entry->pos, __entry->len, - __entry->copied) -); - -DEFINE_EVENT(ext3__write_end, ext3_ordered_write_end, - - TP_PROTO(struct inode *inode, loff_t pos, unsigned int len, - unsigned int copied), - - TP_ARGS(inode, pos, len, copied) -); - -DEFINE_EVENT(ext3__write_end, ext3_writeback_write_end, - - TP_PROTO(struct inode *inode, loff_t pos, unsigned int len, - unsigned int copied), - - TP_ARGS(inode, pos, len, copied) -); - -DEFINE_EVENT(ext3__write_end, ext3_journalled_write_end, - - TP_PROTO(struct inode *inode, loff_t pos, unsigned int len, - unsigned int copied), - - TP_ARGS(inode, pos, len, copied) -); - -DECLARE_EVENT_CLASS(ext3__page_op, - TP_PROTO(struct page *page), - - TP_ARGS(page), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, ino ) - __field( pgoff_t, index ) - - ), - - TP_fast_assign( - __entry->index = page->index; - __entry->ino = page->mapping->host->i_ino; - __entry->dev = page->mapping->host->i_sb->s_dev; - ), - - TP_printk("dev %d,%d ino %lu page_index %lu", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, __entry->index) -); - -DEFINE_EVENT(ext3__page_op, ext3_ordered_writepage, - - TP_PROTO(struct page *page), - - TP_ARGS(page) -); - -DEFINE_EVENT(ext3__page_op, ext3_writeback_writepage, - - TP_PROTO(struct page *page), - - TP_ARGS(page) -); - -DEFINE_EVENT(ext3__page_op, ext3_journalled_writepage, - - TP_PROTO(struct page *page), - - TP_ARGS(page) -); - -DEFINE_EVENT(ext3__page_op, ext3_readpage, - - TP_PROTO(struct page *page), - - TP_ARGS(page) -); - -DEFINE_EVENT(ext3__page_op, ext3_releasepage, - - TP_PROTO(struct page *page), - - TP_ARGS(page) -); - -TRACE_EVENT(ext3_invalidatepage, - TP_PROTO(struct page *page, unsigned int offset, unsigned int length), - - TP_ARGS(page, offset, length), - - TP_STRUCT__entry( - __field( pgoff_t, index ) - __field( unsigned int, offset ) - __field( unsigned int, length ) - __field( ino_t, ino ) - __field( dev_t, dev ) - - ), - - TP_fast_assign( - __entry->index = page->index; - __entry->offset = offset; - __entry->length = length; - __entry->ino = page->mapping->host->i_ino; - __entry->dev = page->mapping->host->i_sb->s_dev; - ), - - TP_printk("dev %d,%d ino %lu page_index %lu offset %u length %u", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - __entry->index, __entry->offset, __entry->length) -); - -TRACE_EVENT(ext3_discard_blocks, - TP_PROTO(struct super_block *sb, unsigned long blk, - unsigned long count), - - TP_ARGS(sb, blk, count), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( unsigned long, blk ) - __field( unsigned long, count ) - - ), - - TP_fast_assign( - __entry->dev = sb->s_dev; - __entry->blk = blk; - __entry->count = count; - ), - - TP_printk("dev %d,%d blk %lu count %lu", - MAJOR(__entry->dev), MINOR(__entry->dev), - __entry->blk, __entry->count) -); - -TRACE_EVENT(ext3_request_blocks, - TP_PROTO(struct inode *inode, unsigned long goal, - unsigned long count), - - TP_ARGS(inode, goal, count), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, ino ) - __field( unsigned long, count ) - __field( unsigned long, goal ) - ), - - TP_fast_assign( - __entry->dev = inode->i_sb->s_dev; - __entry->ino = inode->i_ino; - __entry->count = count; - __entry->goal = goal; - ), - - TP_printk("dev %d,%d ino %lu count %lu goal %lu ", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - __entry->count, __entry->goal) -); - -TRACE_EVENT(ext3_allocate_blocks, - TP_PROTO(struct inode *inode, unsigned long goal, - unsigned long count, unsigned long block), - - TP_ARGS(inode, goal, count, block), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, ino ) - __field( unsigned long, block ) - __field( unsigned long, count ) - __field( unsigned long, goal ) - ), - - TP_fast_assign( - __entry->dev = inode->i_sb->s_dev; - __entry->ino = inode->i_ino; - __entry->block = block; - __entry->count = count; - __entry->goal = goal; - ), - - TP_printk("dev %d,%d ino %lu count %lu block %lu goal %lu", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - __entry->count, __entry->block, - __entry->goal) -); - -TRACE_EVENT(ext3_free_blocks, - TP_PROTO(struct inode *inode, unsigned long block, - unsigned long count), - - TP_ARGS(inode, block, count), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, ino ) - __field( umode_t, mode ) - __field( unsigned long, block ) - __field( unsigned long, count ) - ), - - TP_fast_assign( - __entry->dev = inode->i_sb->s_dev; - __entry->ino = inode->i_ino; - __entry->mode = inode->i_mode; - __entry->block = block; - __entry->count = count; - ), - - TP_printk("dev %d,%d ino %lu mode 0%o block %lu count %lu", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - __entry->mode, __entry->block, __entry->count) -); - -TRACE_EVENT(ext3_sync_file_enter, - TP_PROTO(struct file *file, int datasync), - - TP_ARGS(file, datasync), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, ino ) - __field( ino_t, parent ) - __field( int, datasync ) - ), - - TP_fast_assign( - struct dentry *dentry = file->f_path.dentry; - - __entry->dev = d_inode(dentry)->i_sb->s_dev; - __entry->ino = d_inode(dentry)->i_ino; - __entry->datasync = datasync; - __entry->parent = d_inode(dentry->d_parent)->i_ino; - ), - - TP_printk("dev %d,%d ino %lu parent %ld datasync %d ", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - (unsigned long) __entry->parent, __entry->datasync) -); - -TRACE_EVENT(ext3_sync_file_exit, - TP_PROTO(struct inode *inode, int ret), - - TP_ARGS(inode, ret), - - TP_STRUCT__entry( - __field( int, ret ) - __field( ino_t, ino ) - __field( dev_t, dev ) - ), - - TP_fast_assign( - __entry->ret = ret; - __entry->ino = inode->i_ino; - __entry->dev = inode->i_sb->s_dev; - ), - - TP_printk("dev %d,%d ino %lu ret %d", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - __entry->ret) -); - -TRACE_EVENT(ext3_sync_fs, - TP_PROTO(struct super_block *sb, int wait), - - TP_ARGS(sb, wait), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( int, wait ) - - ), - - TP_fast_assign( - __entry->dev = sb->s_dev; - __entry->wait = wait; - ), - - TP_printk("dev %d,%d wait %d", - MAJOR(__entry->dev), MINOR(__entry->dev), - __entry->wait) -); - -TRACE_EVENT(ext3_rsv_window_add, - TP_PROTO(struct super_block *sb, - struct ext3_reserve_window_node *rsv_node), - - TP_ARGS(sb, rsv_node), - - TP_STRUCT__entry( - __field( unsigned long, start ) - __field( unsigned long, end ) - __field( dev_t, dev ) - ), - - TP_fast_assign( - __entry->dev = sb->s_dev; - __entry->start = rsv_node->rsv_window._rsv_start; - __entry->end = rsv_node->rsv_window._rsv_end; - ), - - TP_printk("dev %d,%d start %lu end %lu", - MAJOR(__entry->dev), MINOR(__entry->dev), - __entry->start, __entry->end) -); - -TRACE_EVENT(ext3_discard_reservation, - TP_PROTO(struct inode *inode, - struct ext3_reserve_window_node *rsv_node), - - TP_ARGS(inode, rsv_node), - - TP_STRUCT__entry( - __field( unsigned long, start ) - __field( unsigned long, end ) - __field( ino_t, ino ) - __field( dev_t, dev ) - ), - - TP_fast_assign( - __entry->start = rsv_node->rsv_window._rsv_start; - __entry->end = rsv_node->rsv_window._rsv_end; - __entry->ino = inode->i_ino; - __entry->dev = inode->i_sb->s_dev; - ), - - TP_printk("dev %d,%d ino %lu start %lu end %lu", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long)__entry->ino, __entry->start, - __entry->end) -); - -TRACE_EVENT(ext3_alloc_new_reservation, - TP_PROTO(struct super_block *sb, unsigned long goal), - - TP_ARGS(sb, goal), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( unsigned long, goal ) - ), - - TP_fast_assign( - __entry->dev = sb->s_dev; - __entry->goal = goal; - ), - - TP_printk("dev %d,%d goal %lu", - MAJOR(__entry->dev), MINOR(__entry->dev), - __entry->goal) -); - -TRACE_EVENT(ext3_reserved, - TP_PROTO(struct super_block *sb, unsigned long block, - struct ext3_reserve_window_node *rsv_node), - - TP_ARGS(sb, block, rsv_node), - - TP_STRUCT__entry( - __field( unsigned long, block ) - __field( unsigned long, start ) - __field( unsigned long, end ) - __field( dev_t, dev ) - ), - - TP_fast_assign( - __entry->block = block; - __entry->start = rsv_node->rsv_window._rsv_start; - __entry->end = rsv_node->rsv_window._rsv_end; - __entry->dev = sb->s_dev; - ), - - TP_printk("dev %d,%d block %lu, start %lu end %lu", - MAJOR(__entry->dev), MINOR(__entry->dev), - __entry->block, __entry->start, __entry->end) -); - -TRACE_EVENT(ext3_forget, - TP_PROTO(struct inode *inode, int is_metadata, unsigned long block), - - TP_ARGS(inode, is_metadata, block), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, ino ) - __field( umode_t, mode ) - __field( int, is_metadata ) - __field( unsigned long, block ) - ), - - TP_fast_assign( - __entry->dev = inode->i_sb->s_dev; - __entry->ino = inode->i_ino; - __entry->mode = inode->i_mode; - __entry->is_metadata = is_metadata; - __entry->block = block; - ), - - TP_printk("dev %d,%d ino %lu mode 0%o is_metadata %d block %lu", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - __entry->mode, __entry->is_metadata, __entry->block) -); - -TRACE_EVENT(ext3_read_block_bitmap, - TP_PROTO(struct super_block *sb, unsigned int group), - - TP_ARGS(sb, group), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( __u32, group ) - - ), - - TP_fast_assign( - __entry->dev = sb->s_dev; - __entry->group = group; - ), - - TP_printk("dev %d,%d group %u", - MAJOR(__entry->dev), MINOR(__entry->dev), - __entry->group) -); - -TRACE_EVENT(ext3_direct_IO_enter, - TP_PROTO(struct inode *inode, loff_t offset, unsigned long len, int rw), - - TP_ARGS(inode, offset, len, rw), - - TP_STRUCT__entry( - __field( ino_t, ino ) - __field( dev_t, dev ) - __field( loff_t, pos ) - __field( unsigned long, len ) - __field( int, rw ) - ), - - TP_fast_assign( - __entry->ino = inode->i_ino; - __entry->dev = inode->i_sb->s_dev; - __entry->pos = offset; - __entry->len = len; - __entry->rw = rw; - ), - - TP_printk("dev %d,%d ino %lu pos %llu len %lu rw %d", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - (unsigned long long) __entry->pos, __entry->len, - __entry->rw) -); - -TRACE_EVENT(ext3_direct_IO_exit, - TP_PROTO(struct inode *inode, loff_t offset, unsigned long len, - int rw, int ret), - - TP_ARGS(inode, offset, len, rw, ret), - - TP_STRUCT__entry( - __field( ino_t, ino ) - __field( dev_t, dev ) - __field( loff_t, pos ) - __field( unsigned long, len ) - __field( int, rw ) - __field( int, ret ) - ), - - TP_fast_assign( - __entry->ino = inode->i_ino; - __entry->dev = inode->i_sb->s_dev; - __entry->pos = offset; - __entry->len = len; - __entry->rw = rw; - __entry->ret = ret; - ), - - TP_printk("dev %d,%d ino %lu pos %llu len %lu rw %d ret %d", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - (unsigned long long) __entry->pos, __entry->len, - __entry->rw, __entry->ret) -); - -TRACE_EVENT(ext3_unlink_enter, - TP_PROTO(struct inode *parent, struct dentry *dentry), - - TP_ARGS(parent, dentry), - - TP_STRUCT__entry( - __field( ino_t, parent ) - __field( ino_t, ino ) - __field( loff_t, size ) - __field( dev_t, dev ) - ), - - TP_fast_assign( - __entry->parent = parent->i_ino; - __entry->ino = d_inode(dentry)->i_ino; - __entry->size = d_inode(dentry)->i_size; - __entry->dev = d_inode(dentry)->i_sb->s_dev; - ), - - TP_printk("dev %d,%d ino %lu size %lld parent %ld", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - (unsigned long long)__entry->size, - (unsigned long) __entry->parent) -); - -TRACE_EVENT(ext3_unlink_exit, - TP_PROTO(struct dentry *dentry, int ret), - - TP_ARGS(dentry, ret), - - TP_STRUCT__entry( - __field( ino_t, ino ) - __field( dev_t, dev ) - __field( int, ret ) - ), - - TP_fast_assign( - __entry->ino = d_inode(dentry)->i_ino; - __entry->dev = d_inode(dentry)->i_sb->s_dev; - __entry->ret = ret; - ), - - TP_printk("dev %d,%d ino %lu ret %d", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - __entry->ret) -); - -DECLARE_EVENT_CLASS(ext3__truncate, - TP_PROTO(struct inode *inode), - - TP_ARGS(inode), - - TP_STRUCT__entry( - __field( ino_t, ino ) - __field( dev_t, dev ) - __field( blkcnt_t, blocks ) - ), - - TP_fast_assign( - __entry->ino = inode->i_ino; - __entry->dev = inode->i_sb->s_dev; - __entry->blocks = inode->i_blocks; - ), - - TP_printk("dev %d,%d ino %lu blocks %lu", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, (unsigned long) __entry->blocks) -); - -DEFINE_EVENT(ext3__truncate, ext3_truncate_enter, - - TP_PROTO(struct inode *inode), - - TP_ARGS(inode) -); - -DEFINE_EVENT(ext3__truncate, ext3_truncate_exit, - - TP_PROTO(struct inode *inode), - - TP_ARGS(inode) -); - -TRACE_EVENT(ext3_get_blocks_enter, - TP_PROTO(struct inode *inode, unsigned long lblk, - unsigned long len, int create), - - TP_ARGS(inode, lblk, len, create), - - TP_STRUCT__entry( - __field( ino_t, ino ) - __field( dev_t, dev ) - __field( unsigned long, lblk ) - __field( unsigned long, len ) - __field( int, create ) - ), - - TP_fast_assign( - __entry->ino = inode->i_ino; - __entry->dev = inode->i_sb->s_dev; - __entry->lblk = lblk; - __entry->len = len; - __entry->create = create; - ), - - TP_printk("dev %d,%d ino %lu lblk %lu len %lu create %u", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - __entry->lblk, __entry->len, __entry->create) -); - -TRACE_EVENT(ext3_get_blocks_exit, - TP_PROTO(struct inode *inode, unsigned long lblk, - unsigned long pblk, unsigned long len, int ret), - - TP_ARGS(inode, lblk, pblk, len, ret), - - TP_STRUCT__entry( - __field( ino_t, ino ) - __field( dev_t, dev ) - __field( unsigned long, lblk ) - __field( unsigned long, pblk ) - __field( unsigned long, len ) - __field( int, ret ) - ), - - TP_fast_assign( - __entry->ino = inode->i_ino; - __entry->dev = inode->i_sb->s_dev; - __entry->lblk = lblk; - __entry->pblk = pblk; - __entry->len = len; - __entry->ret = ret; - ), - - TP_printk("dev %d,%d ino %lu lblk %lu pblk %lu len %lu ret %d", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - __entry->lblk, __entry->pblk, - __entry->len, __entry->ret) -); - -TRACE_EVENT(ext3_load_inode, - TP_PROTO(struct inode *inode), - - TP_ARGS(inode), - - TP_STRUCT__entry( - __field( ino_t, ino ) - __field( dev_t, dev ) - ), - - TP_fast_assign( - __entry->ino = inode->i_ino; - __entry->dev = inode->i_sb->s_dev; - ), - - TP_printk("dev %d,%d ino %lu", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino) -); - -#endif /* _TRACE_EXT3_H */ - -/* This part must be outside protection */ -#include <trace/define_trace.h> diff --git a/include/trace/events/jbd.h b/include/trace/events/jbd.h deleted file mode 100644 index da6f259..0000000 --- a/include/trace/events/jbd.h +++ /dev/null @@ -1,194 +0,0 @@ -#undef TRACE_SYSTEM -#define TRACE_SYSTEM jbd - -#if !defined(_TRACE_JBD_H) || defined(TRACE_HEADER_MULTI_READ) -#define _TRACE_JBD_H - -#include <linux/jbd.h> -#include <linux/tracepoint.h> - -TRACE_EVENT(jbd_checkpoint, - - TP_PROTO(journal_t *journal, int result), - - TP_ARGS(journal, result), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( int, result ) - ), - - TP_fast_assign( - __entry->dev = journal->j_fs_dev->bd_dev; - __entry->result = result; - ), - - TP_printk("dev %d,%d result %d", - MAJOR(__entry->dev), MINOR(__entry->dev), - __entry->result) -); - -DECLARE_EVENT_CLASS(jbd_commit, - - TP_PROTO(journal_t *journal, transaction_t *commit_transaction), - - TP_ARGS(journal, commit_transaction), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( int, transaction ) - ), - - TP_fast_assign( - __entry->dev = journal->j_fs_dev->bd_dev; - __entry->transaction = commit_transaction->t_tid; - ), - - TP_printk("dev %d,%d transaction %d", - MAJOR(__entry->dev), MINOR(__entry->dev), - __entry->transaction) -); - -DEFINE_EVENT(jbd_commit, jbd_start_commit, - - TP_PROTO(journal_t *journal, transaction_t *commit_transaction), - - TP_ARGS(journal, commit_transaction) -); - -DEFINE_EVENT(jbd_commit, jbd_commit_locking, - - TP_PROTO(journal_t *journal, transaction_t *commit_transaction), - - TP_ARGS(journal, commit_transaction) -); - -DEFINE_EVENT(jbd_commit, jbd_commit_flushing, - - TP_PROTO(journal_t *journal, transaction_t *commit_transaction), - - TP_ARGS(journal, commit_transaction) -); - -DEFINE_EVENT(jbd_commit, jbd_commit_logging, - - TP_PROTO(journal_t *journal, transaction_t *commit_transaction), - - TP_ARGS(journal, commit_transaction) -); - -TRACE_EVENT(jbd_drop_transaction, - - TP_PROTO(journal_t *journal, transaction_t *commit_transaction), - - TP_ARGS(journal, commit_transaction), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( int, transaction ) - ), - - TP_fast_assign( - __entry->dev = journal->j_fs_dev->bd_dev; - __entry->transaction = commit_transaction->t_tid; - ), - - TP_printk("dev %d,%d transaction %d", - MAJOR(__entry->dev), MINOR(__entry->dev), - __entry->transaction) -); - -TRACE_EVENT(jbd_end_commit, - TP_PROTO(journal_t *journal, transaction_t *commit_transaction), - - TP_ARGS(journal, commit_transaction), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( int, transaction ) - __field( int, head ) - ), - - TP_fast_assign( - __entry->dev = journal->j_fs_dev->bd_dev; - __entry->transaction = commit_transaction->t_tid; - __entry->head = journal->j_tail_sequence; - ), - - TP_printk("dev %d,%d transaction %d head %d", - MAJOR(__entry->dev), MINOR(__entry->dev), - __entry->transaction, __entry->head) -); - -TRACE_EVENT(jbd_do_submit_data, - TP_PROTO(journal_t *journal, transaction_t *commit_transaction), - - TP_ARGS(journal, commit_transaction), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( int, transaction ) - ), - - TP_fast_assign( - __entry->dev = journal->j_fs_dev->bd_dev; - __entry->transaction = commit_transaction->t_tid; - ), - - TP_printk("dev %d,%d transaction %d", - MAJOR(__entry->dev), MINOR(__entry->dev), - __entry->transaction) -); - -TRACE_EVENT(jbd_cleanup_journal_tail, - - TP_PROTO(journal_t *journal, tid_t first_tid, - unsigned long block_nr, unsigned long freed), - - TP_ARGS(journal, first_tid, block_nr, freed), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( tid_t, tail_sequence ) - __field( tid_t, first_tid ) - __field(unsigned long, block_nr ) - __field(unsigned long, freed ) - ), - - TP_fast_assign( - __entry->dev = journal->j_fs_dev->bd_dev; - __entry->tail_sequence = journal->j_tail_sequence; - __entry->first_tid = first_tid; - __entry->block_nr = block_nr; - __entry->freed = freed; - ), - - TP_printk("dev %d,%d from %u to %u offset %lu freed %lu", - MAJOR(__entry->dev), MINOR(__entry->dev), - __entry->tail_sequence, __entry->first_tid, - __entry->block_nr, __entry->freed) -); - -TRACE_EVENT(journal_write_superblock, - TP_PROTO(journal_t *journal, int write_op), - - TP_ARGS(journal, write_op), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( int, write_op ) - ), - - TP_fast_assign( - __entry->dev = journal->j_fs_dev->bd_dev; - __entry->write_op = write_op; - ), - - TP_printk("dev %d,%d write_op %x", MAJOR(__entry->dev), - MINOR(__entry->dev), __entry->write_op) -); - -#endif /* _TRACE_JBD_H */ - -/* This part must be outside protection */ -#include <trace/define_trace.h> |
