diff options
| -rw-r--r-- | drivers/mfd/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/mfd/Makefile | 2 | ||||
| -rw-r--r-- | drivers/mfd/sm501.c | 1148 | ||||
| -rw-r--r-- | include/linux/sm501-regs.h | 357 | ||||
| -rw-r--r-- | include/linux/sm501.h | 170 |
5 files changed, 1691 insertions, 0 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index fc3c885..ab6e985 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2,6 +2,20 @@ # Multifunction miscellaneous devices # +menu "Multifunction device drivers" + +config MFD_SM501 + tristate "Support for Silicon Motion SM501" + ---help--- + This is the core driver for the Silicon Motion SM501 multimedia + companion chip. This device is a multifunction device which may + provide numerous interfaces including USB host controller USB gadget, + Asyncronous Serial ports, Audio functions and a dual display video + interface. The device may be connected by PCI or local bus with + varying functions enabled. + +endmenu + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index adb29b5..5143209 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -2,6 +2,8 @@ # Makefile for multifunction miscellaneous devices # +obj-$(CONFIG_MFD_SM501) += sm501.o + obj-$(CONFIG_MCP) += mcp-core.o obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c new file mode 100644 index 0000000..5c5a1e2 --- /dev/null +++ b/drivers/mfd/sm501.c @@ -0,0 +1,1148 @@ +/* linux/drivers/mfd/sm501.c + * + * Copyright (C) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * Vincent Sanders <vince@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * SM501 MFD driver +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/pci.h> + +#include <linux/sm501.h> +#include <linux/sm501-regs.h> + +#include <asm/io.h> + +struct sm501_device { + struct list_head list; + struct platform_device pdev; +}; + +struct sm501_devdata { + spinlock_t reg_lock; + struct mutex clock_lock; + struct list_head devices; + + struct device *dev; + struct resource *io_res; + struct resource *mem_res; + struct resource *regs_claim; + struct sm501_platdata *platdata; + + int unit_power[20]; + unsigned int pdev_id; + unsigned int irq; + void __iomem *regs; +}; + +#define MHZ (1000 * 1000) + +#ifdef DEBUG +static const unsigned int misc_div[] = { + [0] = 1, + [1] = 2, + [2] = 4, + [3] = 8, + [4] = 16, + [5] = 32, + [6] = 64, + [7] = 128, + [8] = 3, + [9] = 6, + [10] = 12, + [11] = 24, + [12] = 48, + [13] = 96, + [14] = 192, + [15] = 384, +}; + +static const unsigned int px_div[] = { + [0] = 1, + [1] = 2, + [2] = 4, + [3] = 8, + [4] = 16, + [5] = 32, + [6] = 64, + [7] = 128, + [8] = 3, + [9] = 6, + [10] = 12, + [11] = 24, + [12] = 48, + [13] = 96, + [14] = 192, + [15] = 384, + [16] = 5, + [17] = 10, + [18] = 20, + [19] = 40, + [20] = 80, + [21] = 160, + [22] = 320, + [23] = 604, +}; + +static unsigned long decode_div(unsigned long pll2, unsigned long val, + unsigned int lshft, unsigned int selbit, + unsigned long mask, const unsigned int *dtab) +{ + if (val & selbit) + pll2 = 288 * MHZ; + + return pll2 / dtab[(val >> lshft) & mask]; +} + +#define fmt_freq(x) ((x) / MHZ), ((x) % MHZ), (x) + +/* sm501_dump_clk + * + * Print out the current clock configuration for the device +*/ + +static void sm501_dump_clk(struct sm501_devdata *sm) +{ + unsigned long misct = readl(sm->regs + SM501_MISC_TIMING); + unsigned long pm0 = readl(sm->regs + SM501_POWER_MODE_0_CLOCK); + unsigned long pm1 = readl(sm->regs + SM501_POWER_MODE_1_CLOCK); + unsigned long pmc = readl(sm->regs + SM501_POWER_MODE_CONTROL); + unsigned long sdclk0, sdclk1; + unsigned long pll2 = 0; + + switch (misct & 0x30) { + case 0x00: + pll2 = 336 * MHZ; + break; + case 0x10: + pll2 = 288 * MHZ; + break; + case 0x20: + pll2 = 240 * MHZ; + break; + case 0x30: + pll2 = 192 * MHZ; + break; + } + + sdclk0 = (misct & (1<<12)) ? pll2 : 288 * MHZ; + sdclk0 /= misc_div[((misct >> 8) & 0xf)]; + + sdclk1 = (misct & (1<<20)) ? pll2 : 288 * MHZ; + sdclk1 /= misc_div[((misct >> 16) & 0xf)]; + + dev_dbg(sm->dev, "MISCT=%08lx, PM0=%08lx, PM1=%08lx\n", + misct, pm0, pm1); + + dev_dbg(sm->dev, "PLL2 = %ld.%ld MHz (%ld), SDCLK0=%08lx, SDCLK1=%08lx\n", + fmt_freq(pll2), sdclk0, sdclk1); + + dev_dbg(sm->dev, "SDRAM: PM0=%ld, PM1=%ld\n", sdclk0, sdclk1); + + dev_dbg(sm->dev, "PM0[%c]: " + "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), " +x "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n", + (pmc & 3 ) == 0 ? '*' : '-', + fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31, px_div)), + fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15, misc_div)), + fmt_freq(decode_div(pll2, pm0, 8, 1<<12, 15, misc_div)), + fmt_freq(decode_div(pll2, pm0, 0, 1<<4, 15, misc_div))); + + dev_dbg(sm->dev, "PM1[%c]: " + "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), " + "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n", + (pmc & 3 ) == 1 ? '*' : '-', + fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31, px_div)), + fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15, misc_div)), + fmt_freq(decode_div(pll2, pm1, 8, 1<<12, 15, misc_div)), + fmt_freq(decode_div(pll2, pm1, 0, 1<<4, 15, misc_div))); +} +#else +static void sm501_dump_clk(struct sm501_devdata *sm) +{ +} +#endif + +/* sm501_sync_regs + * + * ensure the +*/ + +static void sm501_sync_regs(struct sm501_devdata *sm) +{ + readl(sm->regs); +} + +/* sm501_misc_control + * + * alters the misceleneous control parameters +*/ + +int sm501_misc_control(struct device *dev, + unsigned long set, unsigned long clear) +{ + struct sm501_devdata *sm = dev_get_drvdata(dev); + unsigned long misc; + unsigned long save; + unsigned long to; + + spin_lock_irqsave(&sm->reg_lock, save); + + misc = readl(sm->regs + SM501_MISC_CONTROL); + to = (misc & ~clear) | set; + + if (to != misc) { + writel(to, sm->regs + SM501_MISC_CONTROL); + sm501_sync_regs(sm); + + dev_dbg(sm->dev, "MISC_CONTROL %08lx\n", misc); + } + + spin_unlock_irqrestore(&sm->reg_lock, save); + return to; +} + +EXPORT_SYMBOL_GPL(sm501_misc_control); + +/* sm501_modify_reg + * + * Modify a register in the SM501 which may be shared with other + * drivers. +*/ + +unsigned long sm501_modify_reg(struct device *dev, + unsigned long reg, + unsigned long set, + unsigned long clear) +{ + struct sm501_devdata *sm = dev_get_drvdata(dev); + unsigned long data; + unsigned long save; + + spin_lock_irqsave(&sm->reg_lock, save); + + data = readl(sm->regs + reg); + data |= set; + data &= ~clear; + + writel(data, sm->regs + reg); + sm501_sync_regs(sm); + + spin_unlock_irqrestore(&sm->reg_lock, save); + + return data; +} + +EXPORT_SYMBOL_GPL(sm501_modify_reg); + +unsigned long sm501_gpio_get(struct device *dev, + unsigned long gpio) +{ + struct sm501_devdata *sm = dev_get_drvdata(dev); + unsigned long result; + unsigned long reg; + + reg = (gpio > 32) ? SM501_GPIO_DATA_HIGH : SM501_GPIO_DATA_LOW; + result = readl(sm->regs + reg); + + result >>= (gpio & 31); + return result & 1UL; +} + +EXPORT_SYMBOL_GPL(sm501_gpio_get); + +void sm501_gpio_set(struct device *dev, + unsigned long gpio, + unsigned int to, + unsigned int dir) +{ + struct sm501_devdata *sm = dev_get_drvdata(dev); + + unsigned long bit = 1 << (gpio & 31); + unsigned long base; + unsigned long save; + unsigned long val; + + base = (gpio > 32) ? SM501_GPIO_DATA_HIGH : SM501_GPIO_DATA_LOW; + base += SM501_GPIO; + + spin_lock_irqsave(&sm->reg_lock, save); + + val = readl(sm->regs + base) & ~bit; + if (to) + val |= bit; + writel(val, sm->regs + base); + + val = readl(sm->regs + SM501_GPIO_DDR_LOW) & ~bit; + if (dir) + val |= bit; + + writel(val, sm->regs + SM501_GPIO_DDR_LOW); + sm501_sync_regs(sm); + + spin_unlock_irqrestore(&sm->reg_lock, save); + +} + +EXPORT_SYMBOL_GPL(sm501_gpio_set); + + +/* sm501_unit_power + * + * alters the power active gate to set specific units on or off + */ + +int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to) +{ + struct sm501_devdata *sm = dev_get_drvdata(dev); + unsigned long mode; + unsigned long gate; + unsigned long clock; + + mutex_lock(&sm->clock_lock); + + mode = readl(sm->regs + SM501_POWER_MODE_CONTROL); + gate = readl(sm->regs + SM501_CURRENT_GATE); + clock = readl(sm->regs + SM501_CURRENT_CLOCK); + + mode &= 3; /* get current power mode */ + + if (unit > ARRAY_SIZE(sm->unit_power)) { + dev_err(dev, "%s: bad unit %d\n", __FUNCTION__, unit); + goto already; + } + + dev_dbg(sm->dev, "%s: unit %d, cur %d, to %d\n", __FUNCTION__, unit, + sm->unit_power[unit], to); + + if (to == 0 && sm->unit_power[unit] == 0) { + dev_err(sm->dev, "unit %d is already shutdown\n", unit); + goto already; + } + + sm->unit_power[unit] += to ? 1 : -1; + to = sm->unit_power[unit] ? 1 : 0; + + if (to) { + if (gate & (1 << unit)) + goto already; + gate |= (1 << unit); + } else { + if (!(gate & (1 << unit))) + goto already; + gate &= ~(1 << unit); + } + + switch (mode) { + case 1: + writel(gate, sm->regs + SM501_POWER_MODE_0_GATE); + writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK); + mode = 0; + break; + case 2: + case 0: + writel(gate, sm->regs + SM501_POWER_MODE_1_GATE); + writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK); + mode = 1; + break; + + default: + return -1; + } + + writel(mode, sm->regs + SM501_POWER_MODE_CONTROL); + sm501_sync_regs(sm); + + dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n", + gate, clock, mode); + + msleep(16); + + already: + mutex_unlock(&sm->clock_lock); + return gate; +} + +EXPORT_SYMBOL_GPL(sm501_unit_power); + + +/* Perform a rounded division. */ +static long sm501fb_round_div(long num, long denom) +{ + /* n / d + 1 / 2 = (2n + d) / 2d */ + return (2 * num + denom) / (2 * denom); +} + +/* clock value structure. */ +struct sm501_clock { + unsigned long mclk; + int divider; + int shift; +}; + +/* sm501_select_clock + * + * selects nearest discrete clock frequency the SM501 can achive + * the maximum divisor is 3 or 5 + */ +static unsigned long sm501_select_clock(unsigned long freq, + struct sm501_clock *clock, + int max_div) +{ + unsigned long mclk; + int divider; + int shift; + long diff; + long best_diff = 999999999; + + /* Try 288MHz and 336MHz clocks. */ + for (mclk = 288000000; mclk <= 336000000; mclk += 48000000) { + /* try dividers 1 and 3 for CRT and for panel, + try divider 5 for panel only.*/ + + for (divider = 1; divider <= max_div; divider += 2) { + /* try all 8 shift values.*/ + for (shift = 0; shift < 8; shift++) { + /* Calculate difference to requested clock */ + diff = sm501fb_round_div(mclk, divider << shift) - freq; + if (diff < 0) + diff = -diff; + + /* If it is less than the current, use it */ + if (diff < best_diff) { + best_diff = diff; + + clock->mclk = mclk; + clock->divider = divider; + clock->shift = shift; + } + } + } + } + + /* Return best clock. */ + return clock->mclk / (clock->divider << clock->shift); +} + +/* sm501_set_clock + * + * set one of the four clock sources to the closest available frequency to + * the one specified +*/ + +unsigned long sm501_set_clock(struct device *dev, + int clksrc, + unsigned long req_freq) +{ + struct sm501_devdata *sm = dev_get_drvdata(dev); + unsigned long mode = readl(sm->regs + SM501_POWER_MODE_CONTROL); + unsigned long gate = readl(sm->regs + SM501_CURRENT_GATE); + unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK); + unsigned char reg; + unsigned long sm501_freq; /* the actual frequency acheived */ + + struct sm501_clock to; + + /* find achivable discrete frequency and setup register value + * accordingly, V2XCLK, MCLK and M1XCLK are the same P2XCLK + * has an extra bit for the divider */ + + switch (clksrc) { + case SM501_CLOCK_P2XCLK: + /* This clock is divided in half so to achive the + * requested frequency the value must be multiplied by + * 2. This clock also has an additional pre divisor */ + + sm501_freq = (sm501_select_clock(2 * req_freq, &to, 5) / 2); + reg=to.shift & 0x07;/* bottom 3 bits are shift */ + if (to.divider == 3) + reg |= 0x08; /* /3 divider required */ + else if (to.divider == 5) + reg |= 0x10; /* /5 divider required */ + if (to.mclk != 288000000) + reg |= 0x20; /* which mclk pll is source */ + break; + + case SM501_CLOCK_V2XCLK: + /* This clock is divided in half so to achive the + * requested frequency the value must be multiplied by 2. */ + + sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2); + reg=to.shift & 0x07; /* bottom 3 bits are shift */ + if (to.divider == 3) + reg |= 0x08; /* /3 divider required */ + if (to.mclk != 288000000) + reg |= 0x10; /* which mclk pll is source */ + break; + + case SM501_CLOCK_MCLK: + case SM501_CLOCK_M1XCLK: + /* These clocks are the same and not further divided */ + + sm501_freq = sm501_select_clock( req_freq, &to, 3); + reg=to.shift & 0x07; /* bottom 3 bits are shift */ + if (to.divider == 3) + reg |= 0x08; /* /3 divider required */ + if (to.mclk != 288000000) + reg |= 0x10; /* which mclk pll is source */ + break; + + default: + return 0; /* this is bad */ + } + + mutex_lock(&sm->clock_lock); + + mode = readl(sm->regs + SM501_POWER_MODE_CONTROL); + gate = readl(sm->regs + SM501_CURRENT_GATE); + clock = readl(sm->regs + SM501_CURRENT_CLOCK); + + clock = clock & ~(0xFF << clksrc); + clock |= reg<<clksrc; + + mode &= 3; /* find current mode */ + + switch (mode) { + case 1: + writel(gate, sm->regs + SM501_POWER_MODE_0_GATE); + writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK); + mode = 0; + break; + case 2: + case 0: + writel(gate, sm->regs + SM501_POWER_MODE_1_GATE); + writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK); + mode = 1; + break; + + default: + mutex_unlock(&sm->clock_lock); + return -1; + } + + writel(mode, sm->regs + SM501_POWER_MODE_CONTROL); + sm501_sync_regs(sm); + + dev_info(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n", + gate, clock, mode); + + msleep(16); + mutex_unlock(&sm->clock_lock); + + sm501_dump_clk(sm); + + return sm501_freq; +} + +EXPORT_SYMBOL_GPL(sm501_set_clock); + +/* sm501_find_clock + * + * finds the closest available frequency for a given clock +*/ + +unsigned long sm501_find_clock(int clksrc, + unsigned long req_freq) +{ + unsigned long sm501_freq; /* the frequency achiveable by the 501 */ + struct sm501_clock to; + + switch (clksrc) { + case SM501_CLOCK_P2XCLK: + sm501_freq = (sm501_select_clock(2 * req_freq, &to, 5) / 2); + break; + + case SM501_CLOCK_V2XCLK: + sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2); + break; + + case SM501_CLOCK_MCLK: + case SM501_CLOCK_M1XCLK: + sm501_freq = sm501_select_clock(req_freq, &to, 3); + break; + + default: + sm501_freq = 0; /* error */ + } + + return sm501_freq; +} + +EXPORT_SYMBOL_GPL(sm501_find_clock); + +static struct sm501_device *to_sm_device(struct platform_device *pdev) +{ + return container_of(pdev, struct sm501_device, pdev); +} + +/* sm501_device_release + * + * A release function for the platform devices we create to allow us to + * free any items we allocated +*/ + +static void sm501_device_release(struct device *dev) +{ + kfree(to_sm_device(to_platform_device(dev))); +} + +/* sm501_create_subdev + * + * Create a skeleton platform device with resources for passing to a + * sub-driver +*/ + +static struct platform_device * +sm501_create_subdev(struct sm501_devdata *sm, + char *name, unsigned int res_count) +{ + struct sm501_device *smdev; + + smdev = kzalloc(sizeof(struct sm501_device) + + sizeof(struct resource) * res_count, GFP_KERNEL); + if (!smdev) + return NULL; + + smdev->pdev.dev.release = sm501_device_release; + + smdev->pdev.name = name; + smdev->pdev.id = sm->pdev_id; + smdev->pdev.resource = (struct resource *)(smdev+1); + smdev->pdev.num_resources = res_count; + + smdev->pdev.dev.parent = sm->dev; + + return &smdev->pdev; +} + +/* sm501_register_device + * + * Register a platform device created with sm501_create_subdev() +*/ + +static int sm501_register_device(struct sm501_devdata *sm, + struct platform_device *pdev) +{ + struct sm501_device *smdev = to_sm_device(pdev); + int ptr; + int ret; + + for (ptr = 0; ptr < pdev->num_resources; ptr++) { + printk("%s[%d] flags %08lx: %08llx..%08llx\n", + pdev->name, ptr, + pdev->resource[ptr].flags, + (unsigned long long)pdev->resource[ptr].start, + (unsigned long long)pdev->resource[ptr].end); + } + + ret = platform_device_register(pdev); + + if (ret >= 0) { + dev_dbg(sm->dev, "registered %s\n", pdev->name); + list_add_tail(&smdev->list, &sm->devices); + } else + dev_err(sm->dev, "error registering %s (%d)\n", + pdev->name, ret); + + return ret; +} + +/* sm501_create_subio + * + * Fill in an IO resource for a sub device +*/ + +static void sm501_create_subio(struct sm501_devdata *sm, + struct resource *res, + resource_size_t offs, + resource_size_t size) +{ + res->flags = IORESOURCE_MEM; + res->parent = sm->io_res; + res->start = sm->io_res->start + offs; + res->end = res->start + size - 1; +} + +/* sm501_create_mem + * + * Fill in an MEM resource for a sub device +*/ + +static void sm501_create_mem(struct sm501_devdata *sm, + struct resource *res, + resource_size_t *offs, + resource_size_t size) +{ + *offs -= size; /* adjust memory size */ + + res->flags = IORESOURCE_MEM; + res->parent = sm->mem_res; + res->start = sm->mem_res->start + *offs; + res->end = res->start + size - 1; +} + +/* sm501_create_irq + * + * Fill in an IRQ resource for a sub device +*/ + +static void sm501_create_irq(struct sm501_devdata *sm, + struct resource *res) +{ + res->flags = IORESOURCE_IRQ; + res->parent = NULL; + res->start = res->end = sm->irq; +} + +static int sm501_register_usbhost(struct sm501_devdata *sm, + resource_size_t *mem_avail) +{ + struct platform_device *pdev; + + pdev = sm501_create_subdev(sm, "sm501-usb", 3); + if (!pdev) + return -ENOMEM; + + sm501_create_subio(sm, &pdev->resource[0], 0x40000, 0x20000); + sm501_create_mem(sm, &pdev->resource[1], mem_avail, 256*1024); + sm501_create_irq(sm, &pdev->resource[2]); + + return sm501_register_device(sm, pdev); +} + +static int sm501_register_display(struct sm501_devdata *sm, + resource_size_t *mem_avail) +{ + struct platform_device *pdev; + + pdev = sm501_create_subdev(sm, "sm501-fb", 4); + if (!pdev) + return -ENOMEM; + + sm501_create_subio(sm, &pdev->resource[0], 0x80000, 0x10000); + sm501_create_subio(sm, &pdev->resource[1], 0x100000, 0x50000); + sm501_create_mem(sm, &pdev->resource[2], mem_avail, *mem_avail); + sm501_create_irq(sm, &pdev->resource[3]); + + return sm501_register_device(sm, pdev); +} + +/* sm501_dbg_regs + * + * Debug attribute to attach to parent device to show core registers +*/ + +static ssize_t sm501_dbg_regs(struct device *dev, + struct device_attribute *attr, char *buff) +{ + struct sm501_devdata *sm = dev_get_drvdata(dev) ; + unsigned int reg; + char *ptr = buff; + int ret; + + for (reg = 0x00; reg < 0x70; reg += 4) { + ret = sprintf(ptr, "%08x = %08x\n", + reg, readl(sm->regs + reg)); + ptr += ret; + } + + return ptr - buff; +} + + +static DEVICE_ATTR(dbg_regs, 0666, sm501_dbg_regs, NULL); + +/* sm501_init_reg + * + * Helper function for the init code to setup a register +*/ + +static inline void sm501_init_reg(struct sm501_devdata *sm, + unsigned long reg, + struct sm501_reg_init *r) +{ + unsigned long tmp; + + tmp = readl(sm->regs + reg); + tmp |= r->set; + tmp &= ~r->mask; + writel(tmp, sm->regs + reg); +} + +/* sm501_init_regs + * + * Setup core register values +*/ + +static void sm501_init_regs(struct sm501_devdata *sm, + struct sm501_initdata *init) +{ + sm501_misc_control(sm->dev, + init->misc_control.set, + init->misc_control.mask); + + sm501_init_reg(sm, SM501_MISC_TIMING, &init->misc_timing); + sm501_init_reg(sm, SM501_GPIO31_0_CONTROL, &init->gpio_low); + sm501_init_reg(sm, SM501_GPIO63_32_CONTROL, &init->gpio_high); + + if (init->mclk) { + dev_info(sm->dev, "setting MCLK to %ld\n", init->mclk); + sm501_set_clock(sm->dev, SM501_CLOCK_MCLK, init->mclk); + } + + if (init->m1xclk) { + dev_info(sm->dev, "setting M1XCLK to %ld\n", init->m1xclk); + sm501_set_clock(sm->dev, SM501_CLOCK_M1XCLK, init->m1xclk); + } +} + +static unsigned int sm501_mem_local[] = { + [0] = 4*1024*1024, + [1] = 8*1024*1024, + [2] = 16*1024*1024, + [3] = 32*1024*1024, + [4] = 64*1024*1024, + [5] = 2*1024*1024, +}; + +/* sm501_init_dev + * + * Common init code for an SM501 +*/ + +static int sm501_init_dev(struct sm501_devdata *sm) +{ + resource_size_t mem_avail; + unsigned long dramctrl; + int ret; + + mutex_init(&sm->clock_lock); + spin_lock_init(&sm->reg_lock); + + INIT_LIST_HEAD(&sm->devices); + + dramctrl = readl(sm->regs + SM501_DRAM_CONTROL); + + mem_avail = sm501_mem_local[(dramctrl >> 13) & 0x7]; + + dev_info(sm->dev, "SM501 At %p: Version %08x, %ld Mb, IRQ %d\n", + sm->regs, readl(sm->regs + SM501_DEVICEID), + (unsigned long)mem_avail >> 20, sm->irq); + + dev_info(sm->dev, "CurrentGate %08x\n", readl(sm->regs+0x38)); + dev_info(sm->dev, "CurrentClock %08x\n", readl(sm->regs+0x3c)); + dev_info(sm->dev, "PowerModeControl %08x\n", readl(sm->regs+0x54)); + + ret = device_create_file(sm->dev, &dev_attr_dbg_regs); + if (ret) + dev_err(sm->dev, "failed to create debug regs file\n"); + + sm501_dump_clk(sm); + + /* check to see if we have some device initialisation */ + + if (sm->platdata) { + struct sm501_platdata *pdata = sm->platdata; + + if (pdata->init) { + sm501_init_regs(sm, sm->platdata->init); + + if (pdata->init->devices & SM501_USE_USB_HOST) + sm501_register_usbhost(sm, &mem_avail); + } + } + + /* always create a framebuffer */ + sm501_register_display(sm, &mem_avail); + + return 0; +} + +static int sm501_plat_probe(struct platform_device *dev) +{ + struct sm501_devdata *sm; + int err; + + sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL); + if (sm == NULL) { + dev_err(&dev->dev, "no memory for device data\n"); + err = -ENOMEM; + goto err1; + } + + sm->dev = &dev->dev; + sm->pdev_id = dev->id; + sm->irq = platform_get_irq(dev, 0); + sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1); + sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0); + sm->platdata = dev->dev.platform_data; + + if (sm->irq < 0) { + dev_err(&dev->dev, "failed to get irq resource\n"); + err = sm->irq; + goto err_res; + } + + if (sm->io_res == NULL || sm->mem_res == NULL) { + dev_err(&dev->dev, "failed to get IO resource\n"); + err = -ENOENT; + goto err_res; + } + + sm->regs_claim = request_mem_region(sm->io_res->start, + 0x100, "sm501"); + + if (sm->regs_claim == NULL) { + dev_err(&dev->dev, "cannot claim registers\n"); + err= -EBUSY; + goto err_res; + } + + platform_set_drvdata(dev, sm); + + sm->regs = ioremap(sm->io_res->start, + (sm->io_res->end - sm->io_res->start) - 1); + + if (sm->regs == NULL) { + dev_err(&dev->dev, "cannot remap registers\n"); + err = -EIO; + goto err_claim; + } + + return sm501_init_dev(sm); + + err_claim: + release_resource(sm->regs_claim); + kfree(sm->regs_claim); + err_res: + kfree(sm); + err1: + return err; + +} + +/* Initialisation data for PCI devices */ + +static struct sm501_initdata sm501_pci_initdata = { + .gpio_high = { + .set = 0x3F000000, /* 24bit panel */ + .mask = 0x0, + }, + .misc_timing = { + .set = 0x010100, /* SDRAM timing */ + .mask = 0x1F1F00, + }, + .misc_control = { + .set = SM501_MISC_PNL_24BIT, + .mask = 0, + }, + + .devices = SM501_USE_ALL, + .mclk = 100 * MHZ, + .m1xclk = 160 * MHZ, +}; + +static struct sm501_platdata_fbsub sm501_pdata_fbsub = { + .flags = (SM501FB_FLAG_USE_INIT_MODE | + SM501FB_FLAG_USE_HWCURSOR | + SM501FB_FLAG_USE_HWACCEL | + SM501FB_FLAG_DISABLE_AT_EXIT), +}; + +static struct sm501_platdata_fb sm501_fb_pdata = { + .fb_route = SM501_FB_OWN, + .fb_crt = &sm501_pdata_fbsub, + .fb_pnl = &sm501_pdata_fbsub, +}; + +static struct sm501_platdata sm501_pci_platdata = { + .init = &sm501_pci_initdata, + .fb = &sm501_fb_pdata, +}; + +static int sm501_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct sm501_devdata *sm; + int err; + + sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL); + if (sm == NULL) { + dev_err(&dev->dev, "no memory for device data\n"); + err = -ENOMEM; + goto err1; + } + + /* set a default set of platform data */ + dev->dev.platform_data = sm->platdata = &sm501_pci_platdata; + + /* set a hopefully unique id for our child platform devices */ + sm->pdev_id = 32 + dev->devfn; + + pci_set_drvdata(dev, sm); + + err = pci_enable_device(dev); + if (err) { + dev_err(&dev->dev, "cannot enable device\n"); + goto err2; + } + + sm->dev = &dev->dev; + sm->irq = dev->irq; + +#ifdef __BIG_ENDIAN + /* if the system is big-endian, we most probably have a + * translation in the IO layer making the PCI bus little endian + * so make the framebuffer swapped pixels */ + + sm501_fb_pdata.flags |= SM501_FBPD_SWAP_FB_ENDIAN; +#endif + + /* check our resources */ + + if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM)) { + dev_err(&dev->dev, "region #0 is not memory?\n"); + err = -EINVAL; + goto err3; + } + + if (!(pci_resource_flags(dev, 1) & IORESOURCE_MEM)) { + dev_err(&dev->dev, "region #1 is not memory?\n"); + err = -EINVAL; + goto err3; + } + + /* make our resources ready for sharing */ + + sm->io_res = &dev->resource[1]; + sm->mem_res = &dev->resource[0]; + + sm->regs_claim = request_mem_region(sm->io_res->start, + 0x100, "sm501"); + if (sm->regs_claim == NULL) { + dev_err(&dev->dev, "cannot claim registers\n"); + err= -EBUSY; + goto err3; + } + + sm->regs = ioremap(pci_resource_start(dev, 1), + pci_resource_len(dev, 1)); + + if (sm->regs == NULL) { + dev_err(&dev->dev, "cannot remap registers\n"); + err = -EIO; + goto err4; + } + + sm501_init_dev(sm); + return 0; + + err4: + release_resource(sm->regs_claim); + kfree(sm->regs_claim); + err3: + pci_disable_device(dev); + err2: + pci_set_drvdata(dev, NULL); + kfree(sm); + err1: + return err; +} + +static void sm501_remove_sub(struct sm501_devdata *sm, + struct sm501_device *smdev) +{ + list_del(&smdev->list); + platform_device_unregister(&smdev->pdev); +} + +static void sm501_dev_remove(struct sm501_devdata *sm) +{ + struct sm501_device *smdev, *tmp; + + list_for_each_entry_safe(smdev, tmp, &sm->devices, list) + sm501_remove_sub(sm, smdev); + + device_remove_file(sm->dev, &dev_attr_dbg_regs); +} + +static void sm501_pci_remove(struct pci_dev *dev) +{ + struct sm501_devdata *sm = pci_get_drvdata(dev); + + sm501_dev_remove(sm); + iounmap(sm->regs); + + release_resource(sm->regs_claim); + kfree(sm->regs_claim); + + pci_set_drvdata(dev, NULL); + pci_disable_device(dev); +} + +static int sm501_plat_remove(struct platform_device *dev) +{ + struct sm501_devdata *sm = platform_get_drvdata(dev); + + sm501_dev_remove(sm); + iounmap(sm->regs); + + release_resource(sm->regs_claim); + kfree(sm->regs_claim); + + return 0; +} + +static struct pci_device_id sm501_pci_tbl[] = { + { 0x126f, 0x0501, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, }, +}; + +MODULE_DEVICE_TABLE(pci, sm501_pci_tbl); + +static struct pci_driver sm501_pci_drv = { + .name = "sm501", + .id_table = sm501_pci_tbl, + .probe = sm501_pci_probe, + .remove = sm501_pci_remove, +}; + +static struct platform_driver sm501_plat_drv = { + .driver = { + .name = "sm501", + .owner = THIS_MODULE, + }, + .probe = sm501_plat_probe, + .remove = sm501_plat_remove, +}; + +static int __init sm501_base_init(void) +{ + platform_driver_register(&sm501_plat_drv); + return pci_module_init(&sm501_pci_drv); +} + +static void __exit sm501_base_exit(void) +{ + platform_driver_unregister(&sm501_plat_drv); + pci_unregister_driver(&sm501_pci_drv); +} + +module_init(sm501_base_init); +module_exit(sm501_base_exit); + +MODULE_DESCRIPTION("SM501 Core Driver"); +MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Vincent Sanders"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/sm501-regs.h b/include/linux/sm501-regs.h new file mode 100644 index 0000000..cc9be4a --- /dev/null +++ b/include/linux/sm501-regs.h @@ -0,0 +1,357 @@ +/* sm501-regs.h + * + * Copyright 2006 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Silicon Motion SM501 register definitions +*/ + +/* System Configuration area */ +/* System config base */ +#define SM501_SYS_CONFIG (0x000000) + +/* config 1 */ +#define SM501_SYSTEM_CONTROL (0x000000) +#define SM501_MISC_CONTROL (0x000004) + +#define SM501_MISC_BUS_SH (0x0) +#define SM501_MISC_BUS_PCI (0x1) +#define SM501_MISC_BUS_XSCALE (0x2) +#define SM501_MISC_BUS_NEC (0x6) +#define SM501_MISC_BUS_MASK (0x7) + +#define SM501_MISC_VR_62MB (1<<3) +#define SM501_MISC_CDR_RESET (1<<7) +#define SM501_MISC_USB_LB (1<<8) +#define SM501_MISC_USB_SLAVE (1<<9) +#define SM501_MISC_BL_1 (1<<10) +#define SM501_MISC_MC (1<<11) +#define SM501_MISC_DAC_POWER (1<<12) +#define SM501_MISC_IRQ_INVERT (1<<16) +#define SM501_MISC_SH (1<<17) + +#define SM501_MISC_HOLD_EMPTY (0<<18) +#define SM501_MISC_HOLD_8 (1<<18) +#define SM501_MISC_HOLD_16 (2<<18) +#define SM501_MISC_HOLD_24 (3<<18) +#define SM501_MISC_HOLD_32 (4<<18) +#define SM501_MISC_HOLD_MASK (7<<18) + +#define SM501_MISC_FREQ_12 (1<<24) +#define SM501_MISC_PNL_24BIT (1<<25) +#define SM501_MISC_8051_LE (1<<26) + + + +#define SM501_GPIO31_0_CONTROL (0x000008) +#define SM501_GPIO63_32_CONTROL (0x00000C) +#define SM501_DRAM_CONTROL (0x000010) + +/* command list */ +#define SM501_ARBTRTN_CONTROL (0x000014) + +/* command list */ +#define SM501_COMMAND_LIST_STATUS (0x000024) + +/* interrupt debug */ +#define SM501_RAW_IRQ_STATUS (0x000028) +#define SM501_RAW_IRQ_CLEAR (0x000028) +#define SM501_IRQ_STATUS (0x00002C) +#define SM501_IRQ_MASK (0x000030) +#define SM501_DEBUG_CONTROL (0x000034) + +/* power management */ +#define SM501_CURRENT_GATE (0x000038) +#define SM501_CURRENT_CLOCK (0x00003C) +#define SM501_POWER_MODE_0_GATE (0x000040) +#define SM501_POWER_MODE_0_CLOCK (0x000044) +#define SM501_POWER_MODE_1_GATE (0x000048) +#define SM501_POWER_MODE_1_CLOCK (0x00004C) +#define SM501_SLEEP_MODE_GATE (0x000050) +#define SM501_POWER_MODE_CONTROL (0x000054) + +/* power gates for units within the 501 */ +#define SM501_GATE_HOST (0) +#define SM501_GATE_MEMORY (1) +#define SM501_GATE_DISPLAY (2) +#define SM501_GATE_2D_ENGINE (3) +#define SM501_GATE_CSC (4) +#define SM501_GATE_ZVPORT (5) +#define SM501_GATE_GPIO (6) +#define SM501_GATE_UART0 (7) +#define SM501_GATE_UART1 (8) +#define SM501_GATE_SSP (10) +#define SM501_GATE_USB_HOST (11) +#define SM501_GATE_USB_GADGET (12) +#define SM501_GATE_UCONTROLLER (17) +#define SM501_GATE_AC97 (18) + +/* panel clock */ +#define SM501_CLOCK_P2XCLK (24) +/* crt clock */ +#define SM501_CLOCK_V2XCLK (16) +/* main clock */ +#define SM501_CLOCK_MCLK (8) +/* SDRAM controller clock */ +#define SM501_CLOCK_M1XCLK (0) + +/* config 2 */ +#define SM501_PCI_MASTER_BASE (0x000058) +#define SM501_ENDIAN_CONTROL (0x00005C) +#define SM501_DEVICEID (0x000060) +/* 0x050100A0 */ + +#define SM501_PLLCLOCK_COUNT (0x000064) +#define SM501_MISC_TIMING (0x000068) +#define SM501_CURRENT_SDRAM_CLOCK (0x00006C) + +/* GPIO base */ +#define SM501_GPIO (0x010000) +#define SM501_GPIO_DATA_LOW (0x00) +#define SM501_GPIO_DATA_HIGH (0x04) +#define SM501_GPIO_DDR_LOW (0x08) +#define SM501_GPIO_DDR_HIGH (0x0C) +#define SM501_GPIO_IRQ_SETUP (0x10) +#define SM501_GPIO_IRQ_STATUS (0x14) +#define SM501_GPIO_IRQ_RESET (0x14) + +/* I2C controller base */ +#define SM501_I2C (0x010040) +#define SM501_I2C_BYTE_COUNT (0x00) +#define SM501_I2C_CONTROL (0x01) +#define SM501_I2C_STATUS (0x02) +#define SM501_I2C_RESET (0x02) +#define SM501_I2C_SLAVE_ADDRESS (0x03) +#define SM501_I2C_DATA (0x04) + +/* SSP base */ +#define SM501_SSP (0x020000) + +/* Uart 0 base */ +#define SM501_UART0 (0x030000) + +/* Uart 1 base */ +#define SM501_UART1 (0x030020) + +/* USB host port base */ +#define SM501_USB_HOST (0x040000) + +/* USB slave/gadget base */ +#define SM501_USB_GADGET (0x060000) + +/* USB slave/gadget data port base */ +#define SM501_USB_GADGET_DATA (0x070000) + +/* Display contoller/video engine base */ +#define SM501_DC (0x080000) + +/* common defines for the SM501 address registers */ +#define SM501_ADDR_FLIP (1<<31) +#define SM501_ADDR_EXT (1<<27) +#define SM501_ADDR_CS1 (1<<26) +#define SM501_ADDR_MASK (0x3f << 26) + +#define SM501_FIFO_MASK (0x3 << 16) +#define SM501_FIFO_1 (0x0 << 16) +#define SM501_FIFO_3 (0x1 << 16) +#define SM501_FIFO_7 (0x2 << 16) +#define SM501_FIFO_11 (0x3 << 16) + +/* common registers for panel and the crt */ +#define SM501_OFF_DC_H_TOT (0x000) +#define SM501_OFF_DC_V_TOT (0x008) +#define SM501_OFF_DC_H_SYNC (0x004) +#define SM501_OFF_DC_V_SYNC (0x00C) + +#define SM501_DC_PANEL_CONTROL (0x000) + +#define SM501_DC_PANEL_CONTROL_FPEN (1<<27) +#define SM501_DC_PANEL_CONTROL_BIAS (1<<26) +#define SM501_DC_PANEL_CONTROL_DATA (1<<25) +#define SM501_DC_PANEL_CONTROL_VDD (1<<24) +#define SM501_DC_PANEL_CONTROL_DP (1<<23) + +#define SM501_DC_PANEL_CONTROL_TFT_888 (0<<21) +#define SM501_DC_PANEL_CONTROL_TFT_333 (1<<21) +#define SM501_DC_PANEL_CONTROL_TFT_444 (2<<21) + +#define SM501_DC_PANEL_CONTROL_DE (1<<20) + +#define SM501_DC_PANEL_CONTROL_LCD_TFT (0<<18) +#define SM501_DC_PANEL_CONTROL_LCD_STN8 (1<<18) +#define SM501_DC_PANEL_CONTROL_LCD_STN12 (2<<18) + +#define SM501_DC_PANEL_CONTROL_CP (1<<14) +#define SM501_DC_PANEL_CONTROL_VSP (1<<13) +#define SM501_DC_PANEL_CONTROL_HSP (1<<12) +#define SM501_DC_PANEL_CONTROL_CK (1<<9) +#define SM501_DC_PANEL_CONTROL_TE (1<<8) +#define SM501_DC_PANEL_CONTROL_VPD (1<<7) +#define SM501_DC_PANEL_CONTROL_VP (1<<6) +#define SM501_DC_PANEL_CONTROL_HPD (1<<5) +#define SM501_DC_PANEL_CONTROL_HP (1<<4) +#define SM501_DC_PANEL_CONTROL_GAMMA (1<<3) +#define SM501_DC_PANEL_CONTROL_EN (1<<2) + +#define SM501_DC_PANEL_CONTROL_8BPP (0<<0) +#define SM501_DC_PANEL_CONTROL_16BPP (1<<0) +#define SM501_DC_PANEL_CONTROL_32BPP (2<<0) + + +#define SM501_DC_PANEL_PANNING_CONTROL (0x004) +#define SM501_DC_PANEL_COLOR_KEY (0x008) +#define SM501_DC_PANEL_FB_ADDR (0x00C) +#define SM501_DC_PANEL_FB_OFFSET (0x010) +#define SM501_DC_PANEL_FB_WIDTH (0x014) +#define SM501_DC_PANEL_FB_HEIGHT (0x018) +#define SM501_DC_PANEL_TL_LOC (0x01C) +#define SM501_DC_PANEL_BR_LOC (0x020) +#define SM501_DC_PANEL_H_TOT (0x024) +#define SM501_DC_PANEL_H_SYNC (0x028) +#define SM501_DC_PANEL_V_TOT (0x02C) +#define SM501_DC_PANEL_V_SYNC (0x030) +#define SM501_DC_PANEL_CUR_LINE (0x034) + +#define SM501_DC_VIDEO_CONTROL (0x040) +#define SM501_DC_VIDEO_FB0_ADDR (0x044) +#define SM501_DC_VIDEO_FB_WIDTH (0x048) +#define SM501_DC_VIDEO_FB0_LAST_ADDR (0x04C) +#define SM501_DC_VIDEO_TL_LOC (0x050) +#define SM501_DC_VIDEO_BR_LOC (0x054) +#define SM501_DC_VIDEO_SCALE (0x058) +#define SM501_DC_VIDEO_INIT_SCALE (0x05C) +#define SM501_DC_VIDEO_YUV_CONSTANTS (0x060) +#define SM501_DC_VIDEO_FB1_ADDR (0x064) +#define SM501_DC_VIDEO_FB1_LAST_ADDR (0x068) + +#define SM501_DC_VIDEO_ALPHA_CONTROL (0x080) +#define SM501_DC_VIDEO_ALPHA_FB_ADDR (0x084) +#define SM501_DC_VIDEO_ALPHA_FB_OFFSET (0x088) +#define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR (0x08C) +#define SM501_DC_VIDEO_ALPHA_TL_LOC (0x090) +#define SM501_DC_VIDEO_ALPHA_BR_LOC (0x094) +#define SM501_DC_VIDEO_ALPHA_SCALE (0x098) +#define SM501_DC_VIDEO_ALPHA_INIT_SCALE (0x09C) +#define SM501_DC_VIDEO_ALPHA_CHROMA_KEY (0x0A0) +#define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP (0x0A4) + +#define SM501_DC_PANEL_HWC_BASE (0x0F0) +#define SM501_DC_PANEL_HWC_ADDR (0x0F0) +#define SM501_DC_PANEL_HWC_LOC (0x0F4) +#define SM501_DC_PANEL_HWC_COLOR_1_2 (0x0F8) +#define SM501_DC_PANEL_HWC_COLOR_3 (0x0FC) + +#define SM501_HWC_EN (1<<31) + +#define SM501_OFF_HWC_ADDR (0x00) +#define SM501_OFF_HWC_LOC (0x04) +#define SM501_OFF_HWC_COLOR_1_2 (0x08) +#define SM501_OFF_HWC_COLOR_3 (0x0C) + +#define SM501_DC_ALPHA_CONTROL (0x100) +#define SM501_DC_ALPHA_FB_ADDR (0x104) +#define SM501_DC_ALPHA_FB_OFFSET (0x108) +#define SM501_DC_ALPHA_TL_LOC (0x10C) +#define SM501_DC_ALPHA_BR_LOC (0x110) +#define SM501_DC_ALPHA_CHROMA_KEY (0x114) +#define SM501_DC_ALPHA_COLOR_LOOKUP (0x118) + +#define SM501_DC_CRT_CONTROL (0x200) + +#define SM501_DC_CRT_CONTROL_TVP (1<<15) +#define SM501_DC_CRT_CONTROL_CP (1<<14) +#define SM501_DC_CRT_CONTROL_VSP (1<<13) +#define SM501_DC_CRT_CONTROL_HSP (1<<12) +#define SM501_DC_CRT_CONTROL_VS (1<<11) +#define SM501_DC_CRT_CONTROL_BLANK (1<<10) +#define SM501_DC_CRT_CONTROL_SEL (1<<9) +#define SM501_DC_CRT_CONTROL_TE (1<<8) +#define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4) +#define SM501_DC_CRT_CONTROL_GAMMA (1<<3) +#define SM501_DC_CRT_CONTROL_ENABLE (1<<2) + +#define SM501_DC_CRT_CONTROL_8BPP (0<<0) +#define SM501_DC_CRT_CONTROL_16BPP (1<<0) +#define SM501_DC_CRT_CONTROL_32BPP (2<<0) + +#define SM501_DC_CRT_FB_ADDR (0x204) +#define SM501_DC_CRT_FB_OFFSET (0x208) +#define SM501_DC_CRT_H_TOT (0x20C) +#define SM501_DC_CRT_H_SYNC (0x210) +#define SM501_DC_CRT_V_TOT (0x214) +#define SM501_DC_CRT_V_SYNC (0x218) +#define SM501_DC_CRT_SIGNATURE_ANALYZER (0x21C) +#define SM501_DC_CRT_CUR_LINE (0x220) +#define SM501_DC_CRT_MONITOR_DETECT (0x224) + +#define SM501_DC_CRT_HWC_BASE (0x230) +#define SM501_DC_CRT_HWC_ADDR (0x230) +#define SM501_DC_CRT_HWC_LOC (0x234) +#define SM501_DC_CRT_HWC_COLOR_1_2 (0x238) +#define SM501_DC_CRT_HWC_COLOR_3 (0x23C) + +#define SM501_DC_PANEL_PALETTE (0x400) + +#define SM501_DC_VIDEO_PALETTE (0x800) + +#define SM501_DC_CRT_PALETTE (0xC00) + +/* Zoom Video port base */ +#define SM501_ZVPORT (0x090000) + +/* AC97/I2S base */ +#define SM501_AC97 (0x0A0000) + +/* 8051 micro controller base */ +#define SM501_UCONTROLLER (0x0B0000) + +/* 8051 micro controller SRAM base */ +#define SM501_UCONTROLLER_SRAM (0x0C0000) + +/* DMA base */ +#define SM501_DMA (0x0D0000) + +/* 2d engine base */ +#define SM501_2D_ENGINE (0x100000) +#define SM501_2D_SOURCE (0x00) +#define SM501_2D_DESTINATION (0x04) +#define SM501_2D_DIMENSION (0x08) +#define SM501_2D_CONTROL (0x0C) +#define SM501_2D_PITCH (0x10) +#define SM501_2D_FOREGROUND (0x14) +#define SM501_2D_BACKGROUND (0x18) +#define SM501_2D_STRETCH (0x1C) +#define SM501_2D_COLOR_COMPARE (0x20) +#define SM501_2D_COLOR_COMPARE_MASK (0x24) +#define SM501_2D_MASK (0x28) +#define SM501_2D_CLIP_TL (0x2C) +#define SM501_2D_CLIP_BR (0x30) +#define SM501_2D_MONO_PATTERN_LOW (0x34) +#define SM501_2D_MONO_PATTERN_HIGH (0x38) +#define SM501_2D_WINDOW_WIDTH (0x3C) +#define SM501_2D_SOURCE_BASE (0x40) +#define SM501_2D_DESTINATION_BASE (0x44) +#define SM501_2D_ALPHA (0x48) +#define SM501_2D_WRAP (0x4C) +#define SM501_2D_STATUS (0x50) + +#define SM501_CSC_Y_SOURCE_BASE (0xC8) +#define SM501_CSC_CONSTANTS (0xCC) +#define SM501_CSC_Y_SOURCE_X (0xD0) +#define SM501_CSC_Y_SOURCE_Y (0xD4) +#define SM501_CSC_U_SOURCE_BASE (0xD8) +#define SM501_CSC_V_SOURCE_BASE (0xDC) +#define SM501_CSC_SOURCE_DIMENSION (0xE0) +#define SM501_CSC_SOURCE_PITCH (0xE4) +#define SM501_CSC_DESTINATION (0xE8) +#define SM501_CSC_DESTINATION_DIMENSION (0xEC) +#define SM501_CSC_DESTINATION_PITCH (0xF0) +#define SM501_CSC_SCALE_FACTOR (0xF4) +#define SM501_CSC_DESTINATION_BASE (0xF8) +#define SM501_CSC_CONTROL (0xFC) + +/* 2d engine data port base */ +#define SM501_2D_ENGINE_DATA (0x110000) diff --git a/include/linux/sm501.h b/include/linux/sm501.h new file mode 100644 index 0000000..9e3aaad --- /dev/null +++ b/include/linux/sm501.h @@ -0,0 +1,170 @@ +/* include/linux/sm501.h + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * Vincent Sanders <vince@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +extern int sm501_unit_power(struct device *dev, + unsigned int unit, unsigned int to); + +extern unsigned long sm501_set_clock(struct device *dev, + int clksrc, unsigned long freq); + +extern unsigned long sm501_find_clock(int clksrc, unsigned long req_freq); + +/* sm501_misc_control + * + * Modify the SM501's MISC_CONTROL register +*/ + +extern int sm501_misc_control(struct device *dev, + unsigned long set, unsigned long clear); + +/* sm501_modify_reg + * + * Modify a register in the SM501 which may be shared with other + * drivers. +*/ + +extern unsigned long sm501_modify_reg(struct device *dev, + unsigned long reg, + unsigned long set, + unsigned long clear); + +/* sm501_gpio_set + * + * set the state of the given GPIO line +*/ + +extern void sm501_gpio_set(struct device *dev, + unsigned long gpio, + unsigned int to, + unsigned int dir); + +/* sm501_gpio_get + * + * get the state of the given GPIO line +*/ + +extern unsigned long sm501_gpio_get(struct device *dev, + unsigned long gpio); + + +/* Platform data definitions */ + +#define SM501FB_FLAG_USE_INIT_MODE (1<<0) +#define SM501FB_FLAG_DISABLE_AT_EXIT (1<<1) +#define SM501FB_FLAG_USE_HWCURSOR (1<<2) +#define SM501FB_FLAG_USE_HWACCEL (1<<3) + +struct sm501_platdata_fbsub { + struct fb_videomode *def_mode; + unsigned int def_bpp; + unsigned long max_mem; + unsigned int flags; +}; + +enum sm501_fb_routing { + SM501_FB_OWN = 0, /* CRT=>CRT, Panel=>Panel */ + SM501_FB_CRT_PANEL = 1, /* Panel=>CRT, Panel=>Panel */ +}; + +/* sm501_platdata_fb flag field bit definitions */ + +#define SM501_FBPD_SWAP_FB_ENDIAN (1<<0) /* need to endian swap */ + +/* sm501_platdata_fb + * + * configuration data for the framebuffer driver +*/ + +struct sm501_platdata_fb { + enum sm501_fb_routing fb_route; + unsigned int flags; + struct sm501_platdata_fbsub *fb_crt; + struct sm501_platdata_fbsub *fb_pnl; +}; + +/* gpio i2c */ + +struct sm501_platdata_gpio_i2c { + unsigned int pin_sda; + unsigned int pin_scl; +}; + +/* sm501_initdata + * + * use for initialising values that may not have been setup + * before the driver is loaded. +*/ + +struct sm501_reg_init { + unsigned long set; + unsigned long mask; +}; + +#define SM501_USE_USB_HOST (1<<0) +#define SM501_USE_USB_SLAVE (1<<1) +#define SM501_USE_SSP0 (1<<2) +#define SM501_USE_SSP1 (1<<3) +#define SM501_USE_UART0 (1<<4) +#define SM501_USE_UART1 (1<<5) +#define SM501_USE_FBACCEL (1<<6) +#define SM501_USE_AC97 (1<<7) +#define SM501_USE_I2S (1<<8) + +#define SM501_USE_ALL (0xffffffff) + +struct sm501_initdata { + struct sm501_reg_init gpio_low; + struct sm501_reg_init gpio_high; + struct sm501_reg_init misc_timing; + struct sm501_reg_init misc_control; + + unsigned long devices; + unsigned long mclk; /* non-zero to modify */ + unsigned long m1xclk; /* non-zero to modify */ +}; + +/* sm501_init_gpio + * + * default gpio settings +*/ + +struct sm501_init_gpio { + struct sm501_reg_init gpio_data_low; + struct sm501_reg_init gpio_data_high; + struct sm501_reg_init gpio_ddr_low; + struct sm501_reg_init gpio_ddr_high; +}; + +/* sm501_platdata + * + * This is passed with the platform device to allow the board + * to control the behaviour of the SM501 driver(s) which attach + * to the device. + * +*/ + +struct sm501_platdata { + struct sm501_initdata *init; + struct sm501_init_gpio *init_gpiop; + struct sm501_platdata_fb *fb; + + struct sm501_platdata_gpio_i2c *gpio_i2c; + unsigned int gpio_i2c_nr; +}; |
