diff options
137 files changed, 491 insertions, 428 deletions
diff --git a/arch/x86/mm/testmmiotrace.c b/arch/x86/mm/testmmiotrace.c index 38868ad..f6ae683 100644 --- a/arch/x86/mm/testmmiotrace.c +++ b/arch/x86/mm/testmmiotrace.c @@ -9,7 +9,7 @@ #include <linux/mmiotrace.h> static unsigned long mmio_address; -module_param(mmio_address, ulong, 0); +module_param_hw(mmio_address, ulong, iomem, 0); MODULE_PARM_DESC(mmio_address, " Start address of the mapping of 16 kB " "(or 8 MB if read_far is non-zero)."); diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c index e770ad9..b67263d 100644 --- a/drivers/char/applicom.c +++ b/drivers/char/applicom.c @@ -94,9 +94,9 @@ static struct applicom_board { static unsigned int irq = 0; /* interrupt number IRQ */ static unsigned long mem = 0; /* physical segment of board */ -module_param(irq, uint, 0); +module_param_hw(irq, uint, irq, 0); MODULE_PARM_DESC(irq, "IRQ of the Applicom board"); -module_param(mem, ulong, 0); +module_param_hw(mem, ulong, iomem, 0); MODULE_PARM_DESC(mem, "Shared Memory Address of Applicom board"); static unsigned int numboards; /* number of installed boards */ diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index b2b618f..59ee93e 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -1375,39 +1375,39 @@ MODULE_PARM_DESC(type, "Defines the type of each interface, each" " interface separated by commas. The types are 'kcs'," " 'smic', and 'bt'. For example si_type=kcs,bt will set" " the first interface to kcs and the second to bt"); -module_param_array(addrs, ulong, &num_addrs, 0); +module_param_hw_array(addrs, ulong, iomem, &num_addrs, 0); MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the" " addresses separated by commas. Only use if an interface" " is in memory. Otherwise, set it to zero or leave" " it blank."); -module_param_array(ports, uint, &num_ports, 0); +module_param_hw_array(ports, uint, ioport, &num_ports, 0); MODULE_PARM_DESC(ports, "Sets the port address of each interface, the" " addresses separated by commas. Only use if an interface" " is a port. Otherwise, set it to zero or leave" " it blank."); -module_param_array(irqs, int, &num_irqs, 0); +module_param_hw_array(irqs, int, irq, &num_irqs, 0); MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the" " addresses separated by commas. Only use if an interface" " has an interrupt. Otherwise, set it to zero or leave" " it blank."); -module_param_array(regspacings, int, &num_regspacings, 0); +module_param_hw_array(regspacings, int, other, &num_regspacings, 0); MODULE_PARM_DESC(regspacings, "The number of bytes between the start address" " and each successive register used by the interface. For" " instance, if the start address is 0xca2 and the spacing" " is 2, then the second address is at 0xca4. Defaults" " to 1."); -module_param_array(regsizes, int, &num_regsizes, 0); +module_param_hw_array(regsizes, int, other, &num_regsizes, 0); MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes." " This should generally be 1, 2, 4, or 8 for an 8-bit," " 16-bit, 32-bit, or 64-bit register. Use this if you" " the 8-bit IPMI register has to be read from a larger" " register."); -module_param_array(regshifts, int, &num_regshifts, 0); +module_param_hw_array(regshifts, int, other, &num_regshifts, 0); MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the." " IPMI register, in bits. For instance, if the data" " is read from a 32-bit word and the IPMI data is in" " bit 8-15, then the shift would be 8"); -module_param_array(slave_addrs, int, &num_slave_addrs, 0); +module_param_hw_array(slave_addrs, int, other, &num_slave_addrs, 0); MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for" " the controller. Normally this is 0x20, but can be" " overridden by this parm. This is an array indexed" diff --git a/drivers/char/mwave/mwavedd.c b/drivers/char/mwave/mwavedd.c index 3a3ff2e..b5e3103 100644 --- a/drivers/char/mwave/mwavedd.c +++ b/drivers/char/mwave/mwavedd.c @@ -80,10 +80,10 @@ int mwave_3780i_io = 0; int mwave_uart_irq = 0; int mwave_uart_io = 0; module_param(mwave_debug, int, 0); -module_param(mwave_3780i_irq, int, 0); -module_param(mwave_3780i_io, int, 0); -module_param(mwave_uart_irq, int, 0); -module_param(mwave_uart_io, int, 0); +module_param_hw(mwave_3780i_irq, int, irq, 0); +module_param_hw(mwave_3780i_io, int, ioport, 0); +module_param_hw(mwave_uart_irq, int, irq, 0); +module_param_hw(mwave_uart_io, int, ioport, 0); static int mwave_open(struct inode *inode, struct file *file); static int mwave_close(struct inode *inode, struct file *file); diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c index 9a7e37c..a1df588 100644 --- a/drivers/clocksource/cs5535-clockevt.c +++ b/drivers/clocksource/cs5535-clockevt.c @@ -22,7 +22,7 @@ #define DRV_NAME "cs5535-clockevt" static int timer_irq; -module_param_named(irq, timer_irq, int, 0644); +module_param_hw_named(irq, timer_irq, int, irq, 0644); MODULE_PARM_DESC(irq, "Which IRQ to use for the clock source MFGPT ticks."); /* diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c index 770a9ae..37b30071 100644 --- a/drivers/cpufreq/speedstep-smi.c +++ b/drivers/cpufreq/speedstep-smi.c @@ -378,7 +378,7 @@ static void __exit speedstep_exit(void) cpufreq_unregister_driver(&speedstep_driver); } -module_param(smi_port, int, 0444); +module_param_hw(smi_port, int, ioport, 0444); module_param(smi_cmd, int, 0444); module_param(smi_sig, uint, 0444); diff --git a/drivers/gpio/gpio-104-dio-48e.c b/drivers/gpio/gpio-104-dio-48e.c index 61b50c4..598e209 100644 --- a/drivers/gpio/gpio-104-dio-48e.c +++ b/drivers/gpio/gpio-104-dio-48e.c @@ -33,11 +33,11 @@ static unsigned int base[MAX_NUM_DIO48E]; static unsigned int num_dio48e; -module_param_array(base, uint, &num_dio48e, 0); +module_param_hw_array(base, uint, ioport, &num_dio48e, 0); MODULE_PARM_DESC(base, "ACCES 104-DIO-48E base addresses"); static unsigned int irq[MAX_NUM_DIO48E]; -module_param_array(irq, uint, NULL, 0); +module_param_hw_array(irq, uint, irq, NULL, 0); MODULE_PARM_DESC(irq, "ACCES 104-DIO-48E interrupt line numbers"); /** diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c index 337c048..51f046e 100644 --- a/drivers/gpio/gpio-104-idi-48.c +++ b/drivers/gpio/gpio-104-idi-48.c @@ -33,11 +33,11 @@ static unsigned int base[MAX_NUM_IDI_48]; static unsigned int num_idi_48; -module_param_array(base, uint, &num_idi_48, 0); +module_param_hw_array(base, uint, ioport, &num_idi_48, 0); MODULE_PARM_DESC(base, "ACCES 104-IDI-48 base addresses"); static unsigned int irq[MAX_NUM_IDI_48]; -module_param_array(irq, uint, NULL, 0); +module_param_hw_array(irq, uint, irq, NULL, 0); MODULE_PARM_DESC(irq, "ACCES 104-IDI-48 interrupt line numbers"); /** diff --git a/drivers/gpio/gpio-104-idio-16.c b/drivers/gpio/gpio-104-idio-16.c index 5281e1c..ec2ce34 100644 --- a/drivers/gpio/gpio-104-idio-16.c +++ b/drivers/gpio/gpio-104-idio-16.c @@ -33,11 +33,11 @@ static unsigned int base[MAX_NUM_IDIO_16]; static unsigned int num_idio_16; -module_param_array(base, uint, &num_idio_16, 0); +module_param_hw_array(base, uint, ioport, &num_idio_16, 0); MODULE_PARM_DESC(base, "ACCES 104-IDIO-16 base addresses"); static unsigned int irq[MAX_NUM_IDIO_16]; -module_param_array(irq, uint, NULL, 0); +module_param_hw_array(irq, uint, irq, NULL, 0); MODULE_PARM_DESC(irq, "ACCES 104-IDIO-16 interrupt line numbers"); /** diff --git a/drivers/gpio/gpio-gpio-mm.c b/drivers/gpio/gpio-gpio-mm.c index fa4baa2..11ade5b 100644 --- a/drivers/gpio/gpio-gpio-mm.c +++ b/drivers/gpio/gpio-gpio-mm.c @@ -31,7 +31,7 @@ static unsigned int base[MAX_NUM_GPIOMM]; static unsigned int num_gpiomm; -module_param_array(base, uint, &num_gpiomm, 0); +module_param_hw_array(base, uint, ioport, &num_gpiomm, 0); MODULE_PARM_DESC(base, "Diamond Systems GPIO-MM base addresses"); /** diff --git a/drivers/gpio/gpio-ws16c48.c b/drivers/gpio/gpio-ws16c48.c index 87d6369..5037974 100644 --- a/drivers/gpio/gpio-ws16c48.c +++ b/drivers/gpio/gpio-ws16c48.c @@ -30,11 +30,11 @@ static unsigned int base[MAX_NUM_WS16C48]; static unsigned int num_ws16c48; -module_param_array(base, uint, &num_ws16c48, 0); +module_param_hw_array(base, uint, ioport, &num_ws16c48, 0); MODULE_PARM_DESC(base, "WinSystems WS16C48 base addresses"); static unsigned int irq[MAX_NUM_WS16C48]; -module_param_array(irq, uint, NULL, 0); +module_param_hw_array(irq, uint, irq, NULL, 0); MODULE_PARM_DESC(irq, "WinSystems WS16C48 interrupt line numbers"); /** diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 45c5c48..6e6bf46 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -119,7 +119,7 @@ /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ static u16 force_addr; -module_param(force_addr, ushort, 0); +module_param_hw(force_addr, ushort, ioport, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 8af62fb..5416003 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -323,9 +323,9 @@ MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>"); MODULE_DESCRIPTION("I2C-Bus adapter routines for PCF8584 ISA bus adapter"); MODULE_LICENSE("GPL"); -module_param(base, int, 0); -module_param(irq, int, 0); +module_param_hw(base, int, ioport_or_iomem, 0); +module_param_hw(irq, int, irq, 0); module_param(clock, int, 0); module_param(own, int, 0); -module_param(mmapped, int, 0); +module_param_hw(mmapped, int, other, 0); module_isa_driver(i2c_elektor_driver, 1); diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c index 1bcdd10..faa8fb8 100644 --- a/drivers/i2c/busses/i2c-parport-light.c +++ b/drivers/i2c/busses/i2c-parport-light.c @@ -38,11 +38,11 @@ static struct platform_device *pdev; static u16 base; -module_param(base, ushort, 0); +module_param_hw(base, ushort, ioport, 0); MODULE_PARM_DESC(base, "Base I/O address"); static int irq; -module_param(irq, int, 0); +module_param_hw(irq, int, irq, 0); MODULE_PARM_DESC(irq, "IRQ (optional)"); /* ----- Low-level parallel port access ----------------------------------- */ diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index ba88f17..946ac64 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -197,9 +197,9 @@ MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>"); MODULE_DESCRIPTION("ISA base PCA9564/PCA9665 driver"); MODULE_LICENSE("GPL"); -module_param(base, ulong, 0); +module_param_hw(base, ulong, ioport, 0); MODULE_PARM_DESC(base, "I/O base address"); -module_param(irq, int, 0); +module_param_hw(irq, int, irq, 0); MODULE_PARM_DESC(irq, "IRQ"); module_param(clock, int, 0); MODULE_PARM_DESC(clock, "Clock rate in hertz.\n\t\t" diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index c21ca7b..0ecdb47 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -106,7 +106,7 @@ MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!"); /* If force_addr is set to anything different from 0, we forcibly enable the PIIX4 at the given address. VERY DANGEROUS! */ static int force_addr; -module_param (force_addr, int, 0); +module_param_hw(force_addr, int, ioport, 0); MODULE_PARM_DESC(force_addr, "Forcibly enable the PIIX4 at the given address. " "EXTREMELY DANGEROUS!"); diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 7d58a40..d543a98 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -119,7 +119,7 @@ static int blacklist[] = { /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ static u16 force_addr; -module_param(force_addr, ushort, 0); +module_param_hw(force_addr, ushort, ioport, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); static struct pci_driver sis5595_driver; diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 0ee2646..0dc45e1 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -94,7 +94,7 @@ MODULE_PARM_DESC(force, "Forcibly enable the SMBus. DANGEROUS!"); /* If force_addr is set to anything different from 0, we forcibly enable the VT596 at the given address. VERY DANGEROUS! */ static u16 force_addr; -module_param(force_addr, ushort, 0); +module_param_hw(force_addr, ushort, ioport, 0); MODULE_PARM_DESC(force_addr, "Forcibly enable the SMBus at the given address. " "EXTREMELY DANGEROUS!"); diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index 0a7e410..e0923be 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -42,7 +42,7 @@ MODULE_LICENSE("GPL"); #define MAX_DEVICES 4 static int base[MAX_DEVICES] = { 0x820, 0x840 }; -module_param_array(base, int, NULL, 0); +module_param_hw_array(base, int, ioport, NULL, 0); MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers"); #define POLL_TIMEOUT (HZ/5) diff --git a/drivers/iio/adc/stx104.c b/drivers/iio/adc/stx104.c index 2df84fa5..2da741d 100644 --- a/drivers/iio/adc/stx104.c +++ b/drivers/iio/adc/stx104.c @@ -49,7 +49,7 @@ static unsigned int base[max_num_isa_dev(STX104_EXTENT)]; static unsigned int num_stx104; -module_param_array(base, uint, &num_stx104, 0); +module_param_hw_array(base, uint, ioport, &num_stx104, 0); MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses"); /** diff --git a/drivers/iio/dac/cio-dac.c b/drivers/iio/dac/cio-dac.c index a046422..a8dffd9 100644 --- a/drivers/iio/dac/cio-dac.c +++ b/drivers/iio/dac/cio-dac.c @@ -39,7 +39,7 @@ static unsigned int base[max_num_isa_dev(CIO_DAC_EXTENT)]; static unsigned int num_cio_dac; -module_param_array(base, uint, &num_cio_dac, 0); +module_param_hw_array(base, uint, ioport, &num_cio_dac, 0); MODULE_PARM_DESC(base, "Measurement Computing CIO-DAC base addresses"); /** diff --git a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c index 3827a22..9ce71df 100644 --- a/drivers/input/mouse/inport.c +++ b/drivers/input/mouse/inport.c @@ -78,7 +78,7 @@ MODULE_LICENSE("GPL"); #define INPORT_IRQ 5 static int inport_irq = INPORT_IRQ; -module_param_named(irq, inport_irq, uint, 0); +module_param_hw_named(irq, inport_irq, uint, irq, 0); MODULE_PARM_DESC(irq, "IRQ number (5=default)"); static struct input_dev *inport_dev; diff --git a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c index e241311..6f165e0 100644 --- a/drivers/input/mouse/logibm.c +++ b/drivers/input/mouse/logibm.c @@ -69,7 +69,7 @@ MODULE_LICENSE("GPL"); #define LOGIBM_IRQ 5 static int logibm_irq = LOGIBM_IRQ; -module_param_named(irq, logibm_irq, uint, 0); +module_param_hw_named(irq, logibm_irq, uint, irq, 0); MODULE_PARM_DESC(irq, "IRQ number (5=default)"); static struct input_dev *logibm_dev; diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c index 36e57de..bd53528 100644 --- a/drivers/input/touchscreen/mk712.c +++ b/drivers/input/touchscreen/mk712.c @@ -50,11 +50,11 @@ MODULE_DESCRIPTION("ICS MicroClock MK712 TouchScreen driver"); MODULE_LICENSE("GPL"); static unsigned int mk712_io = 0x260; /* Also 0x200, 0x208, 0x300 */ -module_param_named(io, mk712_io, uint, 0); +module_param_hw_named(io, mk712_io, uint, ioport, 0); MODULE_PARM_DESC(io, "I/O base address of MK712 touchscreen controller"); static unsigned int mk712_irq = 10; /* Also 12, 14, 15 */ -module_param_named(irq, mk712_irq, uint, 0); +module_param_hw_named(irq, mk712_irq, uint, irq, 0); MODULE_PARM_DESC(irq, "IRQ of MK712 touchscreen controller"); /* eight 8-bit registers */ diff --git a/drivers/isdn/hardware/avm/b1isa.c b/drivers/isdn/hardware/avm/b1isa.c index 31ef813..54e871a 100644 --- a/drivers/isdn/hardware/avm/b1isa.c +++ b/drivers/isdn/hardware/avm/b1isa.c @@ -169,8 +169,8 @@ static struct pci_dev isa_dev[MAX_CARDS]; static int io[MAX_CARDS]; static int irq[MAX_CARDS]; -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(io, "I/O base address(es)"); MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); diff --git a/drivers/isdn/hardware/avm/t1isa.c b/drivers/isdn/hardware/avm/t1isa.c index 72ef188..9516203 100644 --- a/drivers/isdn/hardware/avm/t1isa.c +++ b/drivers/isdn/hardware/avm/t1isa.c @@ -516,8 +516,8 @@ static int io[MAX_CARDS]; static int irq[MAX_CARDS]; static int cardnr[MAX_CARDS]; -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param_array(cardnr, int, NULL, 0); MODULE_PARM_DESC(io, "I/O base address(es)"); MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c index 2d12c6c..c7d6867 100644 --- a/drivers/isdn/hisax/config.c +++ b/drivers/isdn/hisax/config.c @@ -350,13 +350,13 @@ MODULE_AUTHOR("Karsten Keil"); MODULE_LICENSE("GPL"); module_param_array(type, int, NULL, 0); module_param_array(protocol, int, NULL, 0); -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(mem, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); +module_param_hw_array(mem, int, iomem, NULL, 0); module_param(id, charp, 0); #ifdef IO0_IO1 -module_param_array(io0, int, NULL, 0); -module_param_array(io1, int, NULL, 0); +module_param_hw_array(io0, int, ioport, NULL, 0); +module_param_hw_array(io1, int, ioport, NULL, 0); #endif #endif /* MODULE */ diff --git a/drivers/media/pci/zoran/zoran_card.c b/drivers/media/pci/zoran/zoran_card.c index 5266755..4680f00 100644 --- a/drivers/media/pci/zoran/zoran_card.c +++ b/drivers/media/pci/zoran/zoran_card.c @@ -69,7 +69,7 @@ MODULE_PARM_DESC(card, "Card type"); */ static unsigned long vidmem; /* default = 0 - Video memory base address */ -module_param(vidmem, ulong, 0444); +module_param_hw(vidmem, ulong, iomem, 0444); MODULE_PARM_DESC(vidmem, "Default video memory base address"); /* diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c index 2f0a0d2..77d5d4c 100644 --- a/drivers/media/rc/serial_ir.c +++ b/drivers/media/rc/serial_ir.c @@ -833,11 +833,11 @@ MODULE_LICENSE("GPL"); module_param(type, int, 0444); MODULE_PARM_DESC(type, "Hardware type (0 = home-brew, 1 = IRdeo, 2 = IRdeo Remote, 3 = AnimaX, 4 = IgorPlug"); -module_param(io, int, 0444); +module_param_hw(io, int, ioport, 0444); MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)"); /* some architectures (e.g. intel xscale) have memory mapped registers */ -module_param(iommap, ulong, 0444); +module_param_hw(iommap, ulong, other, 0444); MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O (0 = no memory mapped io)"); /* @@ -845,13 +845,13 @@ MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O (0 = no memory map * on 32bit word boundaries. * See linux-kernel/drivers/tty/serial/8250/8250.c serial_in()/out() */ -module_param(ioshift, int, 0444); +module_param_hw(ioshift, int, other, 0444); MODULE_PARM_DESC(ioshift, "shift I/O register offset (0 = no shift)"); -module_param(irq, int, 0444); +module_param_hw(irq, int, irq, 0444); MODULE_PARM_DESC(irq, "Interrupt (4 or 3)"); -module_param(share_irq, bool, 0444); +module_param_hw(share_irq, bool, other, 0444); MODULE_PARM_DESC(share_irq, "Share interrupts (0 = off, 1 = on)"); module_param(sense, int, 0444); diff --git a/drivers/misc/dummy-irq.c b/drivers/misc/dummy-irq.c index acbbe03..76a1015 100644 --- a/drivers/misc/dummy-irq.c +++ b/drivers/misc/dummy-irq.c @@ -59,6 +59,6 @@ module_exit(dummy_irq_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Jiri Kosina"); -module_param(irq, uint, 0444); +module_param_hw(irq, uint, irq, 0444); MODULE_PARM_DESC(irq, "The IRQ to register for"); MODULE_DESCRIPTION("Dummy IRQ handler driver"); diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index bd04e8b..e15a973 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -2001,11 +2001,11 @@ static void __exit wbsd_drv_exit(void) module_init(wbsd_drv_init); module_exit(wbsd_drv_exit); #ifdef CONFIG_PNP -module_param_named(nopnp, param_nopnp, uint, 0444); +module_param_hw_named(nopnp, param_nopnp, uint, other, 0444); #endif -module_param_named(io, param_io, uint, 0444); -module_param_named(irq, param_irq, uint, 0444); -module_param_named(dma, param_dma, int, 0444); +module_param_hw_named(io, param_io, uint, ioport, 0444); +module_param_hw_named(irq, param_irq, uint, irq, 0444); +module_param_hw_named(dma, param_dma, int, dma, 0444); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>"); diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index 1b2e921..486e1e6 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -986,9 +986,9 @@ static int cops_close(struct net_device *dev) static struct net_device *cops_dev; MODULE_LICENSE("GPL"); -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(board_type, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); +module_param_hw(board_type, int, other, 0); static int __init cops_module_init(void) { diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c index 01e2ac5..ac755d2 100644 --- a/drivers/net/appletalk/ltpc.c +++ b/drivers/net/appletalk/ltpc.c @@ -1231,9 +1231,9 @@ static struct net_device *dev_ltpc; MODULE_LICENSE("GPL"); module_param(debug, int, 0); -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(dma, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); +module_param_hw(dma, int, dma, 0); static int __init ltpc_module_init(void) diff --git a/drivers/net/arcnet/com20020-isa.c b/drivers/net/arcnet/com20020-isa.c index b9e9931..38fa60d 100644 --- a/drivers/net/arcnet/com20020-isa.c +++ b/drivers/net/arcnet/com20020-isa.c @@ -129,8 +129,8 @@ static int clockp = 0; static int clockm = 0; module_param(node, int, 0); -module_param(io, int, 0); -module_param(irq, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); module_param_string(device, device, sizeof(device), 0); module_param(timeout, int, 0); module_param(backplane, int, 0); diff --git a/drivers/net/arcnet/com90io.c b/drivers/net/arcnet/com90io.c index b57863d..4e56aaf 100644 --- a/drivers/net/arcnet/com90io.c +++ b/drivers/net/arcnet/com90io.c @@ -347,8 +347,8 @@ static int io; /* use the insmod io= irq= shmem= options */ static int irq; static char device[9]; /* use eg. device=arc1 to change name */ -module_param(io, int, 0); -module_param(irq, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); module_param_string(device, device, sizeof(device), 0); MODULE_LICENSE("GPL"); diff --git a/drivers/net/arcnet/com90xx.c b/drivers/net/arcnet/com90xx.c index 81f90c4..ca4a57c 100644 --- a/drivers/net/arcnet/com90xx.c +++ b/drivers/net/arcnet/com90xx.c @@ -88,8 +88,8 @@ static int irq; static int shmem; static char device[9]; /* use eg. device=arc1 to change name */ -module_param(io, int, 0); -module_param(irq, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); module_param(shmem, int, 0); module_param_string(device, device, sizeof(device), 0); diff --git a/drivers/net/can/cc770/cc770_isa.c b/drivers/net/can/cc770/cc770_isa.c index e0d1571..3a30fd3 100644 --- a/drivers/net/can/cc770/cc770_isa.c +++ b/drivers/net/can/cc770/cc770_isa.c @@ -82,16 +82,16 @@ static u8 cor[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff}; static u8 bcr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff}; static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1}; -module_param_array(port, ulong, NULL, S_IRUGO); +module_param_hw_array(port, ulong, ioport, NULL, S_IRUGO); MODULE_PARM_DESC(port, "I/O port number"); -module_param_array(mem, ulong, NULL, S_IRUGO); +module_param_hw_array(mem, ulong, iomem, NULL, S_IRUGO); MODULE_PARM_DESC(mem, "I/O memory address"); -module_param_array(indirect, int, NULL, S_IRUGO); +module_param_hw_array(indirect, int, ioport, NULL, S_IRUGO); MODULE_PARM_DESC(indirect, "Indirect access via address and data port"); -module_param_array(irq, int, NULL, S_IRUGO); +module_param_hw_array(irq, int, irq, NULL, S_IRUGO); MODULE_PARM_DESC(irq, "IRQ number"); module_param_array(clk, int, NULL, S_IRUGO); diff --git a/drivers/net/can/sja1000/sja1000_isa.c b/drivers/net/can/sja1000/sja1000_isa.c index e97e6d3..a89c1e925 100644 --- a/drivers/net/can/sja1000/sja1000_isa.c +++ b/drivers/net/can/sja1000/sja1000_isa.c @@ -48,16 +48,16 @@ static unsigned char ocr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff}; static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1}; static spinlock_t indirect_lock[MAXDEV]; /* lock for indirect access mode */ -module_param_array(port, ulong, NULL, S_IRUGO); +module_param_hw_array(port, ulong, ioport, NULL, S_IRUGO); MODULE_PARM_DESC(port, "I/O port number"); -module_param_array(mem, ulong, NULL, S_IRUGO); +module_param_hw_array(mem, ulong, iomem, NULL, S_IRUGO); MODULE_PARM_DESC(mem, "I/O memory address"); -module_param_array(indirect, int, NULL, S_IRUGO); +module_param_hw_array(indirect, int, ioport, NULL, S_IRUGO); MODULE_PARM_DESC(indirect, "Indirect access via address and data port"); -module_param_array(irq, int, NULL, S_IRUGO); +module_param_hw_array(irq, int, irq, NULL, S_IRUGO); MODULE_PARM_DESC(irq, "IRQ number"); module_param_array(clk, int, NULL, S_IRUGO); diff --git a/drivers/net/ethernet/3com/3c509.c b/drivers/net/ethernet/3com/3c509.c index c7f9f2c..db8592d 100644 --- a/drivers/net/ethernet/3com/3c509.c +++ b/drivers/net/ethernet/3com/3c509.c @@ -1371,7 +1371,7 @@ el3_resume(struct device *pdev) #endif /* CONFIG_PM */ module_param(debug,int, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param(max_interrupt_work, int, 0); MODULE_PARM_DESC(debug, "debug level (0-6)"); MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c index 40196f4..e41245a 100644 --- a/drivers/net/ethernet/3com/3c59x.c +++ b/drivers/net/ethernet/3com/3c59x.c @@ -813,8 +813,8 @@ module_param(global_enable_wol, int, 0); module_param_array(enable_wol, int, NULL, 0); module_param(rx_copybreak, int, 0); module_param(max_interrupt_work, int, 0); -module_param(compaq_ioaddr, int, 0); -module_param(compaq_irq, int, 0); +module_param_hw(compaq_ioaddr, int, ioport, 0); +module_param_hw(compaq_irq, int, irq, 0); module_param(compaq_device_id, int, 0); module_param(watchdog, int, 0); module_param(global_use_mmio, int, 0); diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c index c063b41..66f4798 100644 --- a/drivers/net/ethernet/8390/ne.c +++ b/drivers/net/ethernet/8390/ne.c @@ -74,8 +74,8 @@ static int bad[MAX_NE_CARDS]; static u32 ne_msg_enable; #ifdef MODULE -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param_array(bad, int, NULL, 0); module_param_named(msg_enable, ne_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es),required"); diff --git a/drivers/net/ethernet/8390/smc-ultra.c b/drivers/net/ethernet/8390/smc-ultra.c index 364b651..4e02f6a 100644 --- a/drivers/net/ethernet/8390/smc-ultra.c +++ b/drivers/net/ethernet/8390/smc-ultra.c @@ -561,8 +561,8 @@ static struct net_device *dev_ultra[MAX_ULTRA_CARDS]; static int io[MAX_ULTRA_CARDS]; static int irq[MAX_ULTRA_CARDS]; -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param_named(msg_enable, ultra_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es)"); MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); diff --git a/drivers/net/ethernet/8390/wd.c b/drivers/net/ethernet/8390/wd.c index ad019cb..6efa272 100644 --- a/drivers/net/ethernet/8390/wd.c +++ b/drivers/net/ethernet/8390/wd.c @@ -503,10 +503,10 @@ static int irq[MAX_WD_CARDS]; static int mem[MAX_WD_CARDS]; static int mem_end[MAX_WD_CARDS]; /* for non std. mem size */ -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(mem, int, NULL, 0); -module_param_array(mem_end, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); +module_param_hw_array(mem, int, iomem, NULL, 0); +module_param_hw_array(mem_end, int, iomem, NULL, 0); module_param_named(msg_enable, wd_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es)"); MODULE_PARM_DESC(irq, "IRQ number(s) (ignored for PureData boards)"); diff --git a/drivers/net/ethernet/amd/lance.c b/drivers/net/ethernet/amd/lance.c index 61a641f..12a6a93 100644 --- a/drivers/net/ethernet/amd/lance.c +++ b/drivers/net/ethernet/amd/lance.c @@ -318,9 +318,9 @@ static int io[MAX_CARDS]; static int dma[MAX_CARDS]; static int irq[MAX_CARDS]; -module_param_array(io, int, NULL, 0); -module_param_array(dma, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(dma, int, dma, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param(lance_debug, int, 0); MODULE_PARM_DESC(io, "LANCE/PCnet I/O base address(es),required"); MODULE_PARM_DESC(dma, "LANCE/PCnet ISA DMA channel (ignored for some devices)"); diff --git a/drivers/net/ethernet/amd/ni65.c b/drivers/net/ethernet/amd/ni65.c index 5985bf2..e248d1a 100644 --- a/drivers/net/ethernet/amd/ni65.c +++ b/drivers/net/ethernet/amd/ni65.c @@ -1227,9 +1227,9 @@ static void set_multicast_list(struct net_device *dev) #ifdef MODULE static struct net_device *dev_ni65; -module_param(irq, int, 0); -module_param(io, int, 0); -module_param(dma, int, 0); +module_param_hw(irq, int, irq, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(dma, int, dma, 0); MODULE_PARM_DESC(irq, "ni6510 IRQ number (ignored for some cards)"); MODULE_PARM_DESC(io, "ni6510 I/O base address"); MODULE_PARM_DESC(dma, "ni6510 ISA DMA channel (ignored for some cards)"); diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index 47384f7..da5b58b 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -1704,12 +1704,12 @@ static int use_dma; /* These generate unused var warnings if ALLOW_DMA = 0 */ static int dma; static int dmasize = 16; /* or 64 */ -module_param(io, int, 0); -module_param(irq, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); module_param(debug, int, 0); module_param_string(media, media, sizeof(media), 0); module_param(duplex, int, 0); -module_param(dma , int, 0); +module_param_hw(dma , int, dma, 0); module_param(dmasize , int, 0); module_param(use_dma , int, 0); MODULE_PARM_DESC(io, "cs89x0 I/O base address"); diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c index df4a871..fd6bcf0 100644 --- a/drivers/net/ethernet/dec/tulip/de4x5.c +++ b/drivers/net/ethernet/dec/tulip/de4x5.c @@ -1015,7 +1015,7 @@ static int compact_infoblock(struct net_device *dev, u_char count, u_char *p static int io=0x0;/* EDIT THIS LINE FOR YOUR CONFIGURATION IF NEEDED */ -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); module_param(de4x5_debug, int, 0); module_param(dec_only, int, 0); module_param(args, charp, 0); diff --git a/drivers/net/ethernet/hp/hp100.c b/drivers/net/ethernet/hp/hp100.c index 1a31bee..5673b07 100644 --- a/drivers/net/ethernet/hp/hp100.c +++ b/drivers/net/ethernet/hp/hp100.c @@ -2966,7 +2966,7 @@ MODULE_DESCRIPTION("HP CASCADE Architecture Driver for 100VG-AnyLan Network Adap #define HP100_DEVICES 5 /* Parameters set by insmod */ static int hp100_port[HP100_DEVICES] = { 0, [1 ... (HP100_DEVICES-1)] = -1 }; -module_param_array(hp100_port, int, NULL, 0); +module_param_hw_array(hp100_port, int, ioport, NULL, 0); /* List of devices */ static struct net_device *hp100_devlist[HP100_DEVICES]; diff --git a/drivers/net/ethernet/realtek/atp.c b/drivers/net/ethernet/realtek/atp.c index 9bcd4ae..bed3468 100644 --- a/drivers/net/ethernet/realtek/atp.c +++ b/drivers/net/ethernet/realtek/atp.c @@ -151,8 +151,8 @@ MODULE_LICENSE("GPL"); module_param(max_interrupt_work, int, 0); module_param(debug, int, 0); -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param_array(xcvr, int, NULL, 0); MODULE_PARM_DESC(max_interrupt_work, "ATP maximum events handled per interrupt"); MODULE_PARM_DESC(debug, "ATP debug level (0-7)"); diff --git a/drivers/net/ethernet/smsc/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c index c8d8467..d3bb2ba 100644 --- a/drivers/net/ethernet/smsc/smc9194.c +++ b/drivers/net/ethernet/smsc/smc9194.c @@ -1501,8 +1501,8 @@ static void smc_set_multicast_list(struct net_device *dev) static struct net_device *devSMC9194; MODULE_LICENSE("GPL"); -module_param(io, int, 0); -module_param(irq, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); module_param(ifport, int, 0); MODULE_PARM_DESC(io, "SMC 99194 I/O base address"); MODULE_PARM_DESC(irq, "SMC 99194 IRQ number"); diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index 594fa14..1503f10 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -1176,7 +1176,7 @@ static int iobase[NR_PORTS] = { 0x378, }; module_param_array(mode, charp, NULL, 0); MODULE_PARM_DESC(mode, "baycom operating mode"); -module_param_array(iobase, int, NULL, 0); +module_param_hw_array(iobase, int, ioport, NULL, 0); MODULE_PARM_DESC(iobase, "baycom io base address"); MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu"); diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c index 809dc25..92b13b3 100644 --- a/drivers/net/hamradio/baycom_par.c +++ b/drivers/net/hamradio/baycom_par.c @@ -481,7 +481,7 @@ static int iobase[NR_PORTS] = { 0x378, }; module_param_array(mode, charp, NULL, 0); MODULE_PARM_DESC(mode, "baycom operating mode; eg. par96 or picpar"); -module_param_array(iobase, int, NULL, 0); +module_param_hw_array(iobase, int, ioport, NULL, 0); MODULE_PARM_DESC(iobase, "baycom io base address"); MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu"); diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c index ebc0682..d9a646a 100644 --- a/drivers/net/hamradio/baycom_ser_fdx.c +++ b/drivers/net/hamradio/baycom_ser_fdx.c @@ -614,9 +614,9 @@ static int baud[NR_PORTS] = { [0 ... NR_PORTS-1] = 1200 }; module_param_array(mode, charp, NULL, 0); MODULE_PARM_DESC(mode, "baycom operating mode; * for software DCD"); -module_param_array(iobase, int, NULL, 0); +module_param_hw_array(iobase, int, ioport, NULL, 0); MODULE_PARM_DESC(iobase, "baycom io base address"); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(irq, "baycom irq number"); module_param_array(baud, int, NULL, 0); MODULE_PARM_DESC(baud, "baycom baud rate (300 to 4800)"); diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c index 60fcf51..f1c8a9f 100644 --- a/drivers/net/hamradio/baycom_ser_hdx.c +++ b/drivers/net/hamradio/baycom_ser_hdx.c @@ -642,9 +642,9 @@ static int irq[NR_PORTS] = { 4, }; module_param_array(mode, charp, NULL, 0); MODULE_PARM_DESC(mode, "baycom operating mode; * for software DCD"); -module_param_array(iobase, int, NULL, 0); +module_param_hw_array(iobase, int, ioport, NULL, 0); MODULE_PARM_DESC(iobase, "baycom io base address"); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(irq, "baycom irq number"); MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu"); diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c index 2479072..dec6b76 100644 --- a/drivers/net/hamradio/dmascc.c +++ b/drivers/net/hamradio/dmascc.c @@ -274,7 +274,7 @@ static unsigned long rand; MODULE_AUTHOR("Klaus Kudielka"); MODULE_DESCRIPTION("Driver for high-speed SCC boards"); -module_param_array(io, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); MODULE_LICENSE("GPL"); static void __exit dmascc_exit(void) diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index c285eaf..35f198d 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -2207,11 +2207,11 @@ MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" ALI_IRCC_DRIVER_NAME); -module_param_array(io, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); MODULE_PARM_DESC(io, "Base I/O addresses"); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(irq, "IRQ lines"); -module_param_array(dma, int, NULL, 0); +module_param_hw_array(dma, int, dma, NULL, 0); MODULE_PARM_DESC(dma, "DMA channels"); module_init(ali_ircc_init); diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c index aaecc3b..7beae147b 100644 --- a/drivers/net/irda/nsc-ircc.c +++ b/drivers/net/irda/nsc-ircc.c @@ -2396,11 +2396,11 @@ MODULE_LICENSE("GPL"); module_param(qos_mtt_bits, int, 0); MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time"); -module_param_array(io, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); MODULE_PARM_DESC(io, "Base I/O addresses"); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(irq, "IRQ lines"); -module_param_array(dma, int, NULL, 0); +module_param_hw_array(dma, int, dma, NULL, 0); MODULE_PARM_DESC(dma, "DMA channels"); module_param(dongle_id, int, 0); MODULE_PARM_DESC(dongle_id, "Type-id of used dongle"); diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index dcf92ba..23ed89a 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -82,24 +82,24 @@ MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings, defaults #define DMA_INVAL 255 static int ircc_dma = DMA_INVAL; -module_param(ircc_dma, int, 0); +module_param_hw(ircc_dma, int, dma, 0); MODULE_PARM_DESC(ircc_dma, "DMA channel"); #define IRQ_INVAL 255 static int ircc_irq = IRQ_INVAL; -module_param(ircc_irq, int, 0); +module_param_hw(ircc_irq, int, irq, 0); MODULE_PARM_DESC(ircc_irq, "IRQ line"); static int ircc_fir; -module_param(ircc_fir, int, 0); +module_param_hw(ircc_fir, int, ioport, 0); MODULE_PARM_DESC(ircc_fir, "FIR Base Address"); static int ircc_sir; -module_param(ircc_sir, int, 0); +module_param_hw(ircc_sir, int, ioport, 0); MODULE_PARM_DESC(ircc_sir, "SIR Base Address"); static int ircc_cfg; -module_param(ircc_cfg, int, 0); +module_param_hw(ircc_cfg, int, ioport, 0); MODULE_PARM_DESC(ircc_cfg, "Configuration register base address"); static int ircc_transceiver; diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c index 8d5b903..282b6c9 100644 --- a/drivers/net/irda/w83977af_ir.c +++ b/drivers/net/irda/w83977af_ir.c @@ -1263,9 +1263,9 @@ MODULE_LICENSE("GPL"); module_param(qos_mtt_bits, int, 0); MODULE_PARM_DESC(qos_mtt_bits, "Mimimum Turn Time"); -module_param_array(io, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); MODULE_PARM_DESC(io, "Base I/O addresses"); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(irq, "IRQ lines"); /* diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 4ca71bc..6ea1626 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -232,11 +232,11 @@ static int irq[MAX_CARDS+1] = { -1, -1, -1, -1, -1, -1, 0, }; static struct class *cosa_class; #ifdef MODULE -module_param_array(io, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); MODULE_PARM_DESC(io, "The I/O bases of the COSA or SRP cards"); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(irq, "The IRQ lines of the COSA or SRP cards"); -module_param_array(dma, int, NULL, 0); +module_param_hw_array(dma, int, dma, NULL, 0); MODULE_PARM_DESC(dma, "The DMA channels of the COSA or SRP cards"); MODULE_AUTHOR("Jan \"Yenya\" Kasprzak, <kas@fi.muni.cz>"); diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c index dd6bb33..4de0737 100644 --- a/drivers/net/wan/hostess_sv11.c +++ b/drivers/net/wan/hostess_sv11.c @@ -324,11 +324,11 @@ static void sv11_shutdown(struct z8530_dev *dev) static int io = 0x200; static int irq = 9; -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); MODULE_PARM_DESC(io, "The I/O base of the Comtrol Hostess SV11 card"); -module_param(dma, int, 0); +module_param_hw(dma, int, dma, 0); MODULE_PARM_DESC(dma, "Set this to 1 to use DMA1/DMA3 for TX/RX"); -module_param(irq, int, 0); +module_param_hw(irq, int, irq, 0); MODULE_PARM_DESC(irq, "The interrupt line setting for the Comtrol Hostess SV11 card"); MODULE_AUTHOR("Alan Cox"); diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c index 3ca3419..bde8c03 100644 --- a/drivers/net/wan/sbni.c +++ b/drivers/net/wan/sbni.c @@ -1463,8 +1463,8 @@ set_multicast_list( struct net_device *dev ) #ifdef MODULE -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param_array(baud, int, NULL, 0); module_param_array(rxl, int, NULL, 0); module_param_array(mac, int, NULL, 0); diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c index fbb5aa2..c56f2c2 100644 --- a/drivers/net/wan/sealevel.c +++ b/drivers/net/wan/sealevel.c @@ -363,13 +363,13 @@ static int rxdma=3; static int irq=5; static bool slow=false; -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); MODULE_PARM_DESC(io, "The I/O base of the Sealevel card"); -module_param(txdma, int, 0); +module_param_hw(txdma, int, dma, 0); MODULE_PARM_DESC(txdma, "Transmit DMA channel"); -module_param(rxdma, int, 0); +module_param_hw(rxdma, int, dma, 0); MODULE_PARM_DESC(rxdma, "Receive DMA channel"); -module_param(irq, int, 0); +module_param_hw(irq, int, irq, 0); MODULE_PARM_DESC(irq, "The interrupt line setting for the SeaLevel card"); module_param(slow, bool, 0); MODULE_PARM_DESC(slow, "Set this for an older Sealevel card such as the 4012"); diff --git a/drivers/net/wireless/cisco/airo.c b/drivers/net/wireless/cisco/airo.c index 4b04045..1b7e125 100644 --- a/drivers/net/wireless/cisco/airo.c +++ b/drivers/net/wireless/cisco/airo.c @@ -246,8 +246,8 @@ MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet cards. " "Direct support for ISA/PCI/MPI cards and support for PCMCIA when used with airo_cs."); MODULE_LICENSE("Dual BSD/GPL"); MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340/350"); -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param_array(rates, int, NULL, 0); module_param_array(ssids, charp, NULL, 0); module_param(auto_wep, int, 0); diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 9d42dfe..5548193 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -3150,13 +3150,13 @@ static char *irq[PARPORT_PC_MAX_PORTS]; static char *dma[PARPORT_PC_MAX_PORTS]; MODULE_PARM_DESC(io, "Base I/O address (SPP regs)"); -module_param_array(io, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); MODULE_PARM_DESC(io_hi, "Base I/O address (ECR)"); -module_param_array(io_hi, int, NULL, 0); +module_param_hw_array(io_hi, int, ioport, NULL, 0); MODULE_PARM_DESC(irq, "IRQ line"); -module_param_array(irq, charp, NULL, 0); +module_param_hw_array(irq, charp, irq, NULL, 0); MODULE_PARM_DESC(dma, "DMA channel"); -module_param_array(dma, charp, NULL, 0); +module_param_hw_array(dma, charp, dma, NULL, 0); #if defined(CONFIG_PARPORT_PC_SUPERIO) || \ (defined(CONFIG_PARPORT_1284) && defined(CONFIG_PARPORT_PC_FIFO)) MODULE_PARM_DESC(verbose_probing, "Log chit-chat during initialisation"); diff --git a/drivers/pci/hotplug/cpcihp_generic.c b/drivers/pci/hotplug/cpcihp_generic.c index 88a44a7..bbf9cf8 100644 --- a/drivers/pci/hotplug/cpcihp_generic.c +++ b/drivers/pci/hotplug/cpcihp_generic.c @@ -220,7 +220,7 @@ module_param(first_slot, byte, 0); MODULE_PARM_DESC(first_slot, "Hotswap bus first slot number"); module_param(last_slot, byte, 0); MODULE_PARM_DESC(last_slot, "Hotswap bus last slot number"); -module_param(port, ushort, 0); +module_param_hw(port, ushort, ioport, 0); MODULE_PARM_DESC(port, "#ENUM signal I/O port"); module_param(enum_bit, uint, 0); MODULE_PARM_DESC(enum_bit, "#ENUM signal bit (0-7)"); diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index eb0d80a..fb38cc0 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -108,12 +108,12 @@ static int async_clock = -1; static int cable_mode = -1; static int wakeup = 0; -module_param(i365_base, ulong, 0444); +module_param_hw(i365_base, ulong, ioport, 0444); module_param(ignore, int, 0444); module_param(extra_sockets, int, 0444); -module_param(irq_mask, int, 0444); -module_param_array(irq_list, int, &irq_list_count, 0444); -module_param(cs_irq, int, 0444); +module_param_hw(irq_mask, int, other, 0444); +module_param_hw_array(irq_list, int, irq, &irq_list_count, 0444); +module_param_hw(cs_irq, int, irq, 0444); module_param(async_clock, int, 0444); module_param(cable_mode, int, 0444); module_param(wakeup, int, 0444); diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index 1ee63e5..a1ac72d 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -85,12 +85,12 @@ static int poll_quick = HZ/20; /* CCLK external clock time, in nanoseconds. 70 ns = 14.31818 MHz */ static int cycle_time = 70; -module_param(tcic_base, ulong, 0444); +module_param_hw(tcic_base, ulong, ioport, 0444); module_param(ignore, int, 0444); module_param(do_scan, int, 0444); -module_param(irq_mask, int, 0444); -module_param_array(irq_list, int, &irq_list_count, 0444); -module_param(cs_irq, int, 0444); +module_param_hw(irq_mask, int, other, 0444); +module_param_hw_array(irq_list, int, irq, &irq_list_count, 0444); +module_param_hw(cs_irq, int, irq, 0444); module_param(poll_interval, int, 0444); module_param(poll_quick, int, 0444); module_param(cycle_time, int, 0444); diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c index f44d048..ce5dc73 100644 --- a/drivers/scsi/aha152x.c +++ b/drivers/scsi/aha152x.c @@ -331,11 +331,11 @@ MODULE_LICENSE("GPL"); #if !defined(PCMCIA) #if defined(MODULE) static int io[] = {0, 0}; -module_param_array(io, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); MODULE_PARM_DESC(io,"base io address of controller"); static int irq[] = {0, 0}; -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(irq,"interrupt for controller"); static int scsiid[] = {7, 7}; diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c index 7db448e..a23cc9a 100644 --- a/drivers/scsi/aha1542.c +++ b/drivers/scsi/aha1542.c @@ -31,7 +31,7 @@ module_param(isapnp, bool, 0); MODULE_PARM_DESC(isapnp, "enable PnP support (default=1)"); static int io[MAXBOARDS] = { 0x330, 0x334, 0, 0 }; -module_param_array(io, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); MODULE_PARM_DESC(io, "base IO address of controller (0x130,0x134,0x230,0x234,0x330,0x334, default=0x330,0x334)"); /* time AHA spends on the AT-bus during data transfer */ diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c index 67c8dac..c34fc91 100644 --- a/drivers/scsi/g_NCR5380.c +++ b/drivers/scsi/g_NCR5380.c @@ -85,8 +85,8 @@ static int ncr_53c400; static int ncr_53c400a; static int dtc_3181e; static int hp_c2502; -module_param(ncr_irq, int, 0); -module_param(ncr_addr, int, 0); +module_param_hw(ncr_irq, int, irq, 0); +module_param_hw(ncr_addr, int, ioport, 0); module_param(ncr_5380, int, 0); module_param(ncr_53c400, int, 0); module_param(ncr_53c400a, int, 0); @@ -94,11 +94,11 @@ module_param(dtc_3181e, int, 0); module_param(hp_c2502, int, 0); static int irq[] = { -1, -1, -1, -1, -1, -1, -1, -1 }; -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(irq, "IRQ number(s) (0=none, 254=auto [default])"); static int base[] = { 0, 0, 0, 0, 0, 0, 0, 0 }; -module_param_array(base, int, NULL, 0); +module_param_hw_array(base, int, ioport, NULL, 0); MODULE_PARM_DESC(base, "base address(es)"); static int card[] = { -1, -1, -1, -1, -1, -1, -1, -1 }; diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index d020a13..facc727 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -353,7 +353,7 @@ static int probe_eisa_isa = 0; static int force_dma32 = 0; /* parameters for modprobe/insmod */ -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param(disable, int, 0); module_param(reserve_mode, int, 0); module_param_array(reserve_list, int, NULL, 0); diff --git a/drivers/scsi/qlogicfas.c b/drivers/scsi/qlogicfas.c index 61cac87..840823b 100644 --- a/drivers/scsi/qlogicfas.c +++ b/drivers/scsi/qlogicfas.c @@ -137,8 +137,8 @@ err: static struct qlogicfas408_priv *cards; static int iobase[MAX_QLOGICFAS]; static int irq[MAX_QLOGICFAS] = { [0 ... MAX_QLOGICFAS-1] = -1 }; -module_param_array(iobase, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(iobase, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(iobase, "I/O address"); MODULE_PARM_DESC(irq, "IRQ"); diff --git a/drivers/staging/speakup/speakup_acntpc.c b/drivers/staging/speakup/speakup_acntpc.c index ad72f8e..a041441 100644 --- a/drivers/staging/speakup/speakup_acntpc.c +++ b/drivers/staging/speakup/speakup_acntpc.c @@ -310,7 +310,7 @@ static void accent_release(void) speakup_info.port_tts = 0; } -module_param_named(port, port_forced, int, 0444); +module_param_hw_named(port, port_forced, int, ioport, 0444); module_param_named(start, synth_acntpc.startup, short, 0444); MODULE_PARM_DESC(port, "Set the port for the synthesizer (override probing)."); diff --git a/drivers/staging/speakup/speakup_dtlk.c b/drivers/staging/speakup/speakup_dtlk.c index 5973acc..3318093 100644 --- a/drivers/staging/speakup/speakup_dtlk.c +++ b/drivers/staging/speakup/speakup_dtlk.c @@ -382,7 +382,7 @@ static void dtlk_release(void) speakup_info.port_tts = 0; } -module_param_named(port, port_forced, int, 0444); +module_param_hw_named(port, port_forced, int, ioport, 0444); module_param_named(start, synth_dtlk.startup, short, 0444); MODULE_PARM_DESC(port, "Set the port for the synthesizer (override probing)."); diff --git a/drivers/staging/speakup/speakup_keypc.c b/drivers/staging/speakup/speakup_keypc.c index ba79011..d3203f8 100644 --- a/drivers/staging/speakup/speakup_keypc.c +++ b/drivers/staging/speakup/speakup_keypc.c @@ -312,7 +312,7 @@ static void keynote_release(void) synth_port = 0; } -module_param_named(port, port_forced, int, 0444); +module_param_hw_named(port, port_forced, int, ioport, 0444); module_param_named(start, synth_keypc.startup, short, 0444); MODULE_PARM_DESC(port, "Set the port for the synthesizer (override probing)."); diff --git a/drivers/staging/vme/devices/vme_pio2_core.c b/drivers/staging/vme/devices/vme_pio2_core.c index 20a2d83..367535b 100644 --- a/drivers/staging/vme/devices/vme_pio2_core.c +++ b/drivers/staging/vme/devices/vme_pio2_core.c @@ -466,16 +466,16 @@ static void __exit pio2_exit(void) /* These are required for each board */ MODULE_PARM_DESC(bus, "Enumeration of VMEbus to which the board is connected"); -module_param_array(bus, int, &bus_num, 0444); +module_param_hw_array(bus, int, other, &bus_num, 0444); MODULE_PARM_DESC(base, "Base VME address for PIO2 Registers"); -module_param_array(base, long, &base_num, 0444); +module_param_hw_array(base, long, other, &base_num, 0444); MODULE_PARM_DESC(vector, "VME IRQ Vector (Lower 4 bits masked)"); -module_param_array(vector, int, &vector_num, 0444); +module_param_hw_array(vector, int, other, &vector_num, 0444); MODULE_PARM_DESC(level, "VME IRQ Level"); -module_param_array(level, int, &level_num, 0444); +module_param_hw_array(level, int, other, &level_num, 0444); MODULE_PARM_DESC(variant, "Last 4 characters of PIO2 board variant"); module_param_array(variant, charp, &variant_num, 0444); diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c index 5e4fa92..104f09c 100644 --- a/drivers/tty/cyclades.c +++ b/drivers/tty/cyclades.c @@ -156,8 +156,8 @@ static unsigned int cy_isa_addresses[] = { static long maddr[NR_CARDS]; static int irq[NR_CARDS]; -module_param_array(maddr, long, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(maddr, long, iomem, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); #endif /* CONFIG_ISA */ diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c index 4caf0c3..3b251f4e 100644 --- a/drivers/tty/moxa.c +++ b/drivers/tty/moxa.c @@ -179,7 +179,7 @@ MODULE_FIRMWARE("c320tunx.cod"); module_param_array(type, uint, NULL, 0); MODULE_PARM_DESC(type, "card type: C218=2, C320=4"); -module_param_array(baseaddr, ulong, NULL, 0); +module_param_hw_array(baseaddr, ulong, ioport, NULL, 0); MODULE_PARM_DESC(baseaddr, "base address"); module_param_array(numports, uint, NULL, 0); MODULE_PARM_DESC(numports, "numports (ignored for C218)"); diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 7b8f383..8bd6fb6 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -183,7 +183,7 @@ static int ttymajor = MXSERMAJOR; MODULE_AUTHOR("Casper Yang"); MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver"); -module_param_array(ioaddr, ulong, NULL, 0); +module_param_hw_array(ioaddr, ulong, ioport, NULL, 0); MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board"); module_param(ttymajor, int, 0); MODULE_LICENSE("GPL"); diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index d66c1ed..b51a877 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -250,15 +250,15 @@ static int sReadAiopNumChan(WordIO_t io); MODULE_AUTHOR("Theodore Ts'o"); MODULE_DESCRIPTION("Comtrol RocketPort driver"); -module_param(board1, ulong, 0); +module_param_hw(board1, ulong, ioport, 0); MODULE_PARM_DESC(board1, "I/O port for (ISA) board #1"); -module_param(board2, ulong, 0); +module_param_hw(board2, ulong, ioport, 0); MODULE_PARM_DESC(board2, "I/O port for (ISA) board #2"); -module_param(board3, ulong, 0); +module_param_hw(board3, ulong, ioport, 0); MODULE_PARM_DESC(board3, "I/O port for (ISA) board #3"); -module_param(board4, ulong, 0); +module_param_hw(board4, ulong, ioport, 0); MODULE_PARM_DESC(board4, "I/O port for (ISA) board #4"); -module_param(controller, ulong, 0); +module_param_hw(controller, ulong, ioport, 0); MODULE_PARM_DESC(controller, "I/O port for (ISA) rocketport controller"); module_param(support_low_speed, bool, 0); MODULE_PARM_DESC(support_low_speed, "1 means support 50 baud, 0 means support 460400 baud"); diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 48a07e2..1aab301 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1191,7 +1191,7 @@ module_exit(serial8250_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Generic 8250/16x50 serial driver"); -module_param(share_irqs, uint, 0644); +module_param_hw(share_irqs, uint, other, 0644); MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices (unsafe)"); module_param(nr_uarts, uint, 0644); @@ -1201,7 +1201,7 @@ module_param(skip_txen_test, uint, 0644); MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time"); #ifdef CONFIG_SERIAL_8250_RSA -module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); +module_param_hw_array(probe_rsa, ulong, ioport, &probe_rsa_count, 0444); MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); #endif MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index 657eed8..a2c308f 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -869,9 +869,9 @@ static int txholdbufs[MAX_TOTAL_DEVICES]; module_param(break_on_load, bool, 0); module_param(ttymajor, int, 0); -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(dma, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); +module_param_hw_array(dma, int, dma, NULL, 0); module_param(debug_level, int, 0); module_param_array(maxframe, int, NULL, 0); module_param_array(txdmabufs, int, NULL, 0); diff --git a/drivers/video/fbdev/arcfb.c b/drivers/video/fbdev/arcfb.c index 1928cb2..7e87d0d 100644 --- a/drivers/video/fbdev/arcfb.c +++ b/drivers/video/fbdev/arcfb.c @@ -645,17 +645,17 @@ module_param(nosplash, uint, 0); MODULE_PARM_DESC(nosplash, "Disable doing the splash screen"); module_param(arcfb_enable, uint, 0); MODULE_PARM_DESC(arcfb_enable, "Enable communication with Arc board"); -module_param(dio_addr, ulong, 0); +module_param_hw(dio_addr, ulong, ioport, 0); MODULE_PARM_DESC(dio_addr, "IO address for data, eg: 0x480"); -module_param(cio_addr, ulong, 0); +module_param_hw(cio_addr, ulong, ioport, 0); MODULE_PARM_DESC(cio_addr, "IO address for control, eg: 0x400"); -module_param(c2io_addr, ulong, 0); +module_param_hw(c2io_addr, ulong, ioport, 0); MODULE_PARM_DESC(c2io_addr, "IO address for secondary control, eg: 0x408"); module_param(splashval, ulong, 0); MODULE_PARM_DESC(splashval, "Splash pattern: 0xFF is black, 0x00 is green"); module_param(tuhold, ulong, 0); MODULE_PARM_DESC(tuhold, "Time to hold between strobing data to Arc board"); -module_param(irq, uint, 0); +module_param_hw(irq, uint, irq, 0); MODULE_PARM_DESC(irq, "IRQ for the Arc board"); module_init(arcfb_init); diff --git a/drivers/video/fbdev/n411.c b/drivers/video/fbdev/n411.c index 053deac..a367731 100644 --- a/drivers/video/fbdev/n411.c +++ b/drivers/video/fbdev/n411.c @@ -193,11 +193,11 @@ module_exit(n411_exit); module_param(nosplash, uint, 0); MODULE_PARM_DESC(nosplash, "Disable doing the splash screen"); -module_param(dio_addr, ulong, 0); +module_param_hw(dio_addr, ulong, ioport, 0); MODULE_PARM_DESC(dio_addr, "IO address for data, eg: 0x480"); -module_param(cio_addr, ulong, 0); +module_param_hw(cio_addr, ulong, ioport, 0); MODULE_PARM_DESC(cio_addr, "IO address for control, eg: 0x400"); -module_param(c2io_addr, ulong, 0); +module_param_hw(c2io_addr, ulong, ioport, 0); MODULE_PARM_DESC(c2io_addr, "IO address for secondary control, eg: 0x408"); module_param(splashval, ulong, 0); MODULE_PARM_DESC(splashval, "Splash pattern: 0x00 is black, 0x01 is white"); diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c index 6d03e8e..6c3f78e 100644 --- a/drivers/watchdog/cpu5wdt.c +++ b/drivers/watchdog/cpu5wdt.c @@ -289,7 +289,7 @@ MODULE_DESCRIPTION("sma cpu5 watchdog driver"); MODULE_SUPPORTED_DEVICE("sma cpu5 watchdog"); MODULE_LICENSE("GPL"); -module_param(port, int, 0); +module_param_hw(port, int, ioport, 0); MODULE_PARM_DESC(port, "base address of watchdog card, default is 0x91"); module_param(verbose, int, 0); diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c index 23ee532..38e9671 100644 --- a/drivers/watchdog/eurotechwdt.c +++ b/drivers/watchdog/eurotechwdt.c @@ -97,9 +97,9 @@ MODULE_PARM_DESC(nowayout, #define WDT_TIMER_CFG 0xf3 -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); MODULE_PARM_DESC(io, "Eurotech WDT io port (default=0x3f0)"); -module_param(irq, int, 0); +module_param_hw(irq, int, irq, 0); MODULE_PARM_DESC(irq, "Eurotech WDT irq (default=10)"); module_param(ev, charp, 0); MODULE_PARM_DESC(ev, "Eurotech WDT event type (default is `int')"); diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c index 9f15dd9..06a892e 100644 --- a/drivers/watchdog/pc87413_wdt.c +++ b/drivers/watchdog/pc87413_wdt.c @@ -579,7 +579,7 @@ MODULE_AUTHOR("Marcus Junker <junker@anduras.de>"); MODULE_DESCRIPTION("PC87413 WDT driver"); MODULE_LICENSE("GPL"); -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); MODULE_PARM_DESC(io, MODNAME " I/O port (default: " __MODULE_STRING(IO_DEFAULT) ")."); diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c index 131193a..b34d3d5 100644 --- a/drivers/watchdog/sc1200wdt.c +++ b/drivers/watchdog/sc1200wdt.c @@ -88,7 +88,7 @@ MODULE_PARM_DESC(isapnp, "When set to 0 driver ISA PnP support will be disabled"); #endif -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); MODULE_PARM_DESC(io, "io port"); module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "range is 0-255 minutes, default is 1"); diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c index e0206b5..e481fbb 100644 --- a/drivers/watchdog/wdt.c +++ b/drivers/watchdog/wdt.c @@ -78,9 +78,9 @@ static int irq = 11; static DEFINE_SPINLOCK(wdt_lock); -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); MODULE_PARM_DESC(io, "WDT io port (default=0x240)"); -module_param(irq, int, 0); +module_param_hw(irq, int, irq, 0); MODULE_PARM_DESC(irq, "WDT irq (default=11)"); /* Support for the Fan Tachometer on the WDT501-P */ diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c index 5523df7..5cb022c 100644 --- a/fs/pstore/ram.c +++ b/fs/pstore/ram.c @@ -58,7 +58,7 @@ module_param_named(pmsg_size, ramoops_pmsg_size, ulong, 0400); MODULE_PARM_DESC(pmsg_size, "size of user space message log"); static unsigned long long mem_address; -module_param(mem_address, ullong, 0400); +module_param_hw(mem_address, ullong, other, 0400); MODULE_PARM_DESC(mem_address, "start of reserved RAM used to store oops/panic logs"); diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index 52666d9..6be1949 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -60,9 +60,11 @@ struct kernel_param_ops { * Flags available for kernel_param * * UNSAFE - the parameter is dangerous and setting it will taint the kernel + * HWPARAM - Hardware param not permitted in lockdown mode */ enum { - KERNEL_PARAM_FL_UNSAFE = (1 << 0) + KERNEL_PARAM_FL_UNSAFE = (1 << 0), + KERNEL_PARAM_FL_HWPARAM = (1 << 1), }; struct kernel_param { @@ -451,6 +453,67 @@ extern int param_set_bint(const char *val, const struct kernel_param *kp); perm, -1, 0); \ __MODULE_PARM_TYPE(name, "array of " #type) +enum hwparam_type { + hwparam_ioport, /* Module parameter configures an I/O port */ + hwparam_iomem, /* Module parameter configures an I/O mem address */ + hwparam_ioport_or_iomem, /* Module parameter could be either, depending on other option */ + hwparam_irq, /* Module parameter configures an I/O port */ + hwparam_dma, /* Module parameter configures a DMA channel */ + hwparam_dma_addr, /* Module parameter configures a DMA buffer address */ + hwparam_other, /* Module parameter configures some other value */ +}; + +/** + * module_param_hw_named - A parameter representing a hw parameters + * @name: a valid C identifier which is the parameter name. + * @value: the actual lvalue to alter. + * @type: the type of the parameter + * @hwtype: what the value represents (enum hwparam_type) + * @perm: visibility in sysfs. + * + * Usually it's a good idea to have variable names and user-exposed names the + * same, but that's harder if the variable must be non-static or is inside a + * structure. This allows exposure under a different name. + */ +#define module_param_hw_named(name, value, type, hwtype, perm) \ + param_check_##type(name, &(value)); \ + __module_param_call(MODULE_PARAM_PREFIX, name, \ + ¶m_ops_##type, &value, \ + perm, -1, \ + KERNEL_PARAM_FL_HWPARAM | (hwparam_##hwtype & 0)); \ + __MODULE_PARM_TYPE(name, #type) + +#define module_param_hw(name, type, hwtype, perm) \ + module_param_hw_named(name, name, type, hwtype, perm) + +/** + * module_param_hw_array - A parameter representing an array of hw parameters + * @name: the name of the array variable + * @type: the type, as per module_param() + * @hwtype: what the value represents (enum hwparam_type) + * @nump: optional pointer filled in with the number written + * @perm: visibility in sysfs + * + * Input and output are as comma-separated values. Commas inside values + * don't work properly (eg. an array of charp). + * + * ARRAY_SIZE(@name) is used to determine the number of elements in the + * array, so the definition must be visible. + */ +#define module_param_hw_array(name, type, hwtype, nump, perm) \ + param_check_##type(name, &(name)[0]); \ + static const struct kparam_array __param_arr_##name \ + = { .max = ARRAY_SIZE(name), .num = nump, \ + .ops = ¶m_ops_##type, \ + .elemsize = sizeof(name[0]), .elem = name }; \ + __module_param_call(MODULE_PARAM_PREFIX, name, \ + ¶m_array_ops, \ + .arr = &__param_arr_##name, \ + perm, -1, \ + KERNEL_PARAM_FL_HWPARAM | (hwparam_##hwtype & 0)); \ + __MODULE_PARM_TYPE(name, "array of " #type) + + extern const struct kernel_param_ops param_array_ops; extern const struct kernel_param_ops param_ops_string; diff --git a/sound/drivers/mpu401/mpu401.c b/sound/drivers/mpu401/mpu401.c index fed7e7e..9b86e00 100644 --- a/sound/drivers/mpu401/mpu401.c +++ b/sound/drivers/mpu401/mpu401.c @@ -53,9 +53,9 @@ MODULE_PARM_DESC(enable, "Enable MPU-401 device."); module_param_array(pnp, bool, NULL, 0444); MODULE_PARM_DESC(pnp, "PnP detection for MPU-401 device."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for MPU-401 device."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for MPU-401 device."); module_param_array(uart_enter, bool, NULL, 0444); MODULE_PARM_DESC(uart_enter, "Issue UART_ENTER command at open."); diff --git a/sound/drivers/mtpav.c b/sound/drivers/mtpav.c index 00b31f9..0f63920 100644 --- a/sound/drivers/mtpav.c +++ b/sound/drivers/mtpav.c @@ -86,9 +86,9 @@ module_param(index, int, 0444); MODULE_PARM_DESC(index, "Index value for MotuMTPAV MIDI."); module_param(id, charp, 0444); MODULE_PARM_DESC(id, "ID string for MotuMTPAV MIDI."); -module_param(port, long, 0444); +module_param_hw(port, long, ioport, 0444); MODULE_PARM_DESC(port, "Parallel port # for MotuMTPAV MIDI."); -module_param(irq, int, 0444); +module_param_hw(irq, int, irq, 0444); MODULE_PARM_DESC(irq, "Parallel IRQ # for MotuMTPAV MIDI."); module_param(hwports, int, 0444); MODULE_PARM_DESC(hwports, "Hardware ports # for MotuMTPAV MIDI."); diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c index 60d51ac..88e66ea 100644 --- a/sound/drivers/serial-u16550.c +++ b/sound/drivers/serial-u16550.c @@ -84,9 +84,9 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for Serial MIDI."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable UART16550A chip."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for UART16550A chip."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for UART16550A chip."); module_param_array(speed, int, NULL, 0444); MODULE_PARM_DESC(speed, "Speed in bauds."); diff --git a/sound/isa/ad1848/ad1848.c b/sound/isa/ad1848/ad1848.c index a302d1f..e739b1c 100644 --- a/sound/isa/ad1848/ad1848.c +++ b/sound/isa/ad1848/ad1848.c @@ -55,11 +55,11 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for " CRD_NAME " driver."); module_param_array(thinkpad, bool, NULL, 0444); MODULE_PARM_DESC(thinkpad, "Enable only for the onboard CS4248 of IBM Thinkpad 360/750/755 series."); diff --git a/sound/isa/adlib.c b/sound/isa/adlib.c index 8d3060f..5fb619e 100644 --- a/sound/isa/adlib.c +++ b/sound/isa/adlib.c @@ -27,7 +27,7 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); static int snd_adlib_match(struct device *dev, unsigned int n) diff --git a/sound/isa/cmi8328.c b/sound/isa/cmi8328.c index 7874750..8e1756c 100644 --- a/sound/isa/cmi8328.c +++ b/sound/isa/cmi8328.c @@ -51,18 +51,18 @@ MODULE_PARM_DESC(index, "Index value for CMI8328 soundcard."); module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for CMI8328 soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for CMI8328 driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for CMI8328 driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 for CMI8328 driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 for CMI8328 driver."); -module_param_array(mpuport, long, NULL, 0444); +module_param_hw_array(mpuport, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8328 driver."); -module_param_array(mpuirq, int, NULL, 0444); +module_param_hw_array(mpuirq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8328 MPU-401 port."); #ifdef SUPPORT_JOYSTICK module_param_array(gameport, bool, NULL, 0444); diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c index dfedfd8..f64b29a 100644 --- a/sound/isa/cmi8330.c +++ b/sound/isa/cmi8330.c @@ -95,27 +95,27 @@ module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif -module_param_array(sbport, long, NULL, 0444); +module_param_hw_array(sbport, long, ioport, NULL, 0444); MODULE_PARM_DESC(sbport, "Port # for CMI8330/CMI8329 SB driver."); -module_param_array(sbirq, int, NULL, 0444); +module_param_hw_array(sbirq, int, irq, NULL, 0444); MODULE_PARM_DESC(sbirq, "IRQ # for CMI8330/CMI8329 SB driver."); -module_param_array(sbdma8, int, NULL, 0444); +module_param_hw_array(sbdma8, int, dma, NULL, 0444); MODULE_PARM_DESC(sbdma8, "DMA8 for CMI8330/CMI8329 SB driver."); -module_param_array(sbdma16, int, NULL, 0444); +module_param_hw_array(sbdma16, int, dma, NULL, 0444); MODULE_PARM_DESC(sbdma16, "DMA16 for CMI8330/CMI8329 SB driver."); -module_param_array(wssport, long, NULL, 0444); +module_param_hw_array(wssport, long, ioport, NULL, 0444); MODULE_PARM_DESC(wssport, "Port # for CMI8330/CMI8329 WSS driver."); -module_param_array(wssirq, int, NULL, 0444); +module_param_hw_array(wssirq, int, irq, NULL, 0444); MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330/CMI8329 WSS driver."); -module_param_array(wssdma, int, NULL, 0444); +module_param_hw_array(wssdma, int, dma, NULL, 0444); MODULE_PARM_DESC(wssdma, "DMA for CMI8330/CMI8329 WSS driver."); -module_param_array(fmport, long, NULL, 0444); +module_param_hw_array(fmport, long, ioport, NULL, 0444); MODULE_PARM_DESC(fmport, "FM port # for CMI8330/CMI8329 driver."); -module_param_array(mpuport, long, NULL, 0444); +module_param_hw_array(mpuport, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330/CMI8329 driver."); -module_param_array(mpuirq, int, NULL, 0444); +module_param_hw_array(mpuirq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330/CMI8329 MPU-401 port."); #ifdef CONFIG_PNP static int isa_registered; diff --git a/sound/isa/cs423x/cs4231.c b/sound/isa/cs423x/cs4231.c index ef7448e..e8edd90 100644 --- a/sound/isa/cs423x/cs4231.c +++ b/sound/isa/cs423x/cs4231.c @@ -55,17 +55,17 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for " CRD_NAME " driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for " CRD_NAME " driver."); static int snd_cs4231_match(struct device *dev, unsigned int n) diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c index 9d7582c..1f9a3b2 100644 --- a/sound/isa/cs423x/cs4236.c +++ b/sound/isa/cs423x/cs4236.c @@ -98,23 +98,23 @@ MODULE_PARM_DESC(enable, "Enable " IDENT " soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "ISA PnP detection for specified soundcard."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " IDENT " driver."); -module_param_array(cport, long, NULL, 0444); +module_param_hw_array(cport, long, ioport, NULL, 0444); MODULE_PARM_DESC(cport, "Control port # for " IDENT " driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " IDENT " driver."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for " IDENT " driver."); -module_param_array(sb_port, long, NULL, 0444); +module_param_hw_array(sb_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(sb_port, "SB port # for " IDENT " driver (optional)."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " IDENT " driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " IDENT " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for " IDENT " driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for " IDENT " driver."); #ifdef CONFIG_PNP diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c index 1901c2b..36320e7 100644 --- a/sound/isa/es1688/es1688.c +++ b/sound/isa/es1688/es1688.c @@ -71,17 +71,17 @@ module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for ES1688 driver."); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver."); -module_param_array(dma8, int, NULL, 0444); +module_param_hw_array(dma8, int, dma, NULL, 0444); MODULE_PARM_DESC(dma8, "8-bit DMA # for " CRD_NAME " driver."); #ifdef CONFIG_PNP diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c index 5094b62..0cabe2b 100644 --- a/sound/isa/es18xx.c +++ b/sound/isa/es18xx.c @@ -1999,17 +1999,17 @@ MODULE_PARM_DESC(enable, "Enable ES18xx soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for ES18xx driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for ES18xx driver."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for ES18xx driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for ES18xx driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA 1 # for ES18xx driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA 2 # for ES18xx driver."); #ifdef CONFIG_PNP diff --git a/sound/isa/galaxy/galaxy.c b/sound/isa/galaxy/galaxy.c index 379abe2..b9994cc 100644 --- a/sound/isa/galaxy/galaxy.c +++ b/sound/isa/galaxy/galaxy.c @@ -53,21 +53,21 @@ static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; static int dma1[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(wss_port, long, NULL, 0444); +module_param_hw_array(wss_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(wss_port, "WSS port # for " CRD_NAME " driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "Playback DMA # for " CRD_NAME " driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "Capture DMA # for " CRD_NAME " driver."); /* diff --git a/sound/isa/gus/gusclassic.c b/sound/isa/gus/gusclassic.c index c169be4..92a997a 100644 --- a/sound/isa/gus/gusclassic.c +++ b/sound/isa/gus/gusclassic.c @@ -58,13 +58,13 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for " CRD_NAME " driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for " CRD_NAME " driver."); module_param_array(joystick_dac, int, NULL, 0444); MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for " CRD_NAME " driver."); diff --git a/sound/isa/gus/gusextreme.c b/sound/isa/gus/gusextreme.c index 77ac2fd..beb52c0 100644 --- a/sound/isa/gus/gusextreme.c +++ b/sound/isa/gus/gusextreme.c @@ -66,21 +66,21 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(gf1_port, long, NULL, 0444); +module_param_hw_array(gf1_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(gf1_port, "GF1 port # for " CRD_NAME " driver (optional)."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver."); -module_param_array(gf1_irq, int, NULL, 0444); +module_param_hw_array(gf1_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(gf1_irq, "GF1 IRQ # for " CRD_NAME " driver."); -module_param_array(dma8, int, NULL, 0444); +module_param_hw_array(dma8, int, dma, NULL, 0444); MODULE_PARM_DESC(dma8, "8-bit DMA # for " CRD_NAME " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "GF1 DMA # for " CRD_NAME " driver."); module_param_array(joystick_dac, int, NULL, 0444); MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for " CRD_NAME " driver."); diff --git a/sound/isa/gus/gusmax.c b/sound/isa/gus/gusmax.c index dd88c9d..63309a4 100644 --- a/sound/isa/gus/gusmax.c +++ b/sound/isa/gus/gusmax.c @@ -56,13 +56,13 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for GUS MAX soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable GUS MAX soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for GUS MAX driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for GUS MAX driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for GUS MAX driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for GUS MAX driver."); module_param_array(joystick_dac, int, NULL, 0444); MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for GUS MAX driver."); diff --git a/sound/isa/gus/interwave.c b/sound/isa/gus/interwave.c index 70d0040..0687b7e 100644 --- a/sound/isa/gus/interwave.c +++ b/sound/isa/gus/interwave.c @@ -92,17 +92,17 @@ MODULE_PARM_DESC(enable, "Enable InterWave soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "ISA PnP detection for specified soundcard."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for InterWave driver."); #ifdef SNDRV_STB -module_param_array(port_tc, long, NULL, 0444); +module_param_hw_array(port_tc, long, ioport, NULL, 0444); MODULE_PARM_DESC(port_tc, "Tone control (TEA6330T - i2c bus) port # for InterWave driver."); #endif -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for InterWave driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for InterWave driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for InterWave driver."); module_param_array(joystick_dac, int, NULL, 0444); MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for InterWave driver."); diff --git a/sound/isa/msnd/msnd_pinnacle.c b/sound/isa/msnd/msnd_pinnacle.c index 4c07266..ad48973 100644 --- a/sound/isa/msnd/msnd_pinnacle.c +++ b/sound/isa/msnd/msnd_pinnacle.c @@ -800,22 +800,22 @@ MODULE_LICENSE("GPL"); MODULE_FIRMWARE(INITCODEFILE); MODULE_FIRMWARE(PERMCODEFILE); -module_param_array(io, long, NULL, S_IRUGO); +module_param_hw_array(io, long, ioport, NULL, S_IRUGO); MODULE_PARM_DESC(io, "IO port #"); -module_param_array(irq, int, NULL, S_IRUGO); -module_param_array(mem, long, NULL, S_IRUGO); +module_param_hw_array(irq, int, irq, NULL, S_IRUGO); +module_param_hw_array(mem, long, iomem, NULL, S_IRUGO); module_param_array(write_ndelay, int, NULL, S_IRUGO); module_param(calibrate_signal, int, S_IRUGO); #ifndef MSND_CLASSIC module_param_array(digital, int, NULL, S_IRUGO); -module_param_array(cfg, long, NULL, S_IRUGO); +module_param_hw_array(cfg, long, ioport, NULL, S_IRUGO); module_param_array(reset, int, 0, S_IRUGO); -module_param_array(mpu_io, long, NULL, S_IRUGO); -module_param_array(mpu_irq, int, NULL, S_IRUGO); -module_param_array(ide_io0, long, NULL, S_IRUGO); -module_param_array(ide_io1, long, NULL, S_IRUGO); -module_param_array(ide_irq, int, NULL, S_IRUGO); -module_param_array(joystick_io, long, NULL, S_IRUGO); +module_param_hw_array(mpu_io, long, ioport, NULL, S_IRUGO); +module_param_hw_array(mpu_irq, int, irq, NULL, S_IRUGO); +module_param_hw_array(ide_io0, long, ioport, NULL, S_IRUGO); +module_param_hw_array(ide_io1, long, ioport, NULL, S_IRUGO); +module_param_hw_array(ide_irq, int, irq, NULL, S_IRUGO); +module_param_hw_array(joystick_io, long, ioport, NULL, S_IRUGO); #endif diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c index ae13363..4098e3e0 100644 --- a/sound/isa/opl3sa2.c +++ b/sound/isa/opl3sa2.c @@ -69,21 +69,21 @@ MODULE_PARM_DESC(enable, "Enable OPL3-SA soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for OPL3-SA driver."); -module_param_array(sb_port, long, NULL, 0444); +module_param_hw_array(sb_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(sb_port, "SB port # for OPL3-SA driver."); -module_param_array(wss_port, long, NULL, 0444); +module_param_hw_array(wss_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(wss_port, "WSS port # for OPL3-SA driver."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for OPL3-SA driver."); -module_param_array(midi_port, long, NULL, 0444); +module_param_hw_array(midi_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(midi_port, "MIDI port # for OPL3-SA driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for OPL3-SA driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for OPL3-SA driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for OPL3-SA driver."); module_param_array(opl3sa3_ymode, int, NULL, 0444); MODULE_PARM_DESC(opl3sa3_ymode, "Speaker size selection for 3D Enhancement mode: Desktop/Large Notebook/Small Notebook/HiFi."); diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c index 3a9067d..bcbff56 100644 --- a/sound/isa/opti9xx/miro.c +++ b/sound/isa/opti9xx/miro.c @@ -69,19 +69,19 @@ module_param(index, int, 0444); MODULE_PARM_DESC(index, "Index value for miro soundcard."); module_param(id, charp, 0444); MODULE_PARM_DESC(id, "ID string for miro soundcard."); -module_param(port, long, 0444); +module_param_hw(port, long, ioport, 0444); MODULE_PARM_DESC(port, "WSS port # for miro driver."); -module_param(mpu_port, long, 0444); +module_param_hw(mpu_port, long, ioport, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for miro driver."); -module_param(fm_port, long, 0444); +module_param_hw(fm_port, long, ioport, 0444); MODULE_PARM_DESC(fm_port, "FM Port # for miro driver."); -module_param(irq, int, 0444); +module_param_hw(irq, int, irq, 0444); MODULE_PARM_DESC(irq, "WSS irq # for miro driver."); -module_param(mpu_irq, int, 0444); +module_param_hw(mpu_irq, int, irq, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 irq # for miro driver."); -module_param(dma1, int, 0444); +module_param_hw(dma1, int, dma, 0444); MODULE_PARM_DESC(dma1, "1st dma # for miro driver."); -module_param(dma2, int, 0444); +module_param_hw(dma2, int, dma, 0444); MODULE_PARM_DESC(dma2, "2nd dma # for miro driver."); module_param(wss, int, 0444); MODULE_PARM_DESC(wss, "wss mode"); diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index 0a52660..ceddb39 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -88,20 +88,20 @@ MODULE_PARM_DESC(id, "ID string for opti9xx based soundcard."); module_param(isapnp, bool, 0444); MODULE_PARM_DESC(isapnp, "Enable ISA PnP detection for specified soundcard."); #endif -module_param(port, long, 0444); +module_param_hw(port, long, ioport, 0444); MODULE_PARM_DESC(port, "WSS port # for opti9xx driver."); -module_param(mpu_port, long, 0444); +module_param_hw(mpu_port, long, ioport, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for opti9xx driver."); -module_param(fm_port, long, 0444); +module_param_hw(fm_port, long, ioport, 0444); MODULE_PARM_DESC(fm_port, "FM port # for opti9xx driver."); -module_param(irq, int, 0444); +module_param_hw(irq, int, irq, 0444); MODULE_PARM_DESC(irq, "WSS irq # for opti9xx driver."); -module_param(mpu_irq, int, 0444); +module_param_hw(mpu_irq, int, irq, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 irq # for opti9xx driver."); -module_param(dma1, int, 0444); +module_param_hw(dma1, int, dma, 0444); MODULE_PARM_DESC(dma1, "1st dma # for opti9xx driver."); #if defined(CS4231) || defined(OPTi93X) -module_param(dma2, int, 0444); +module_param_hw(dma2, int, dma, 0444); MODULE_PARM_DESC(dma2, "2nd dma # for opti9xx driver."); #endif /* CS4231 || OPTi93X */ diff --git a/sound/isa/sb/jazz16.c b/sound/isa/sb/jazz16.c index 4d90997..bfa0055 100644 --- a/sound/isa/sb/jazz16.c +++ b/sound/isa/sb/jazz16.c @@ -50,17 +50,17 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for Media Vision Jazz16 based soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Media Vision Jazz16 based soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for jazz16 driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for jazz16 driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for jazz16 driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for jazz16 driver."); -module_param_array(dma8, int, NULL, 0444); +module_param_hw_array(dma8, int, dma, NULL, 0444); MODULE_PARM_DESC(dma8, "DMA8 # for jazz16 driver."); -module_param_array(dma16, int, NULL, 0444); +module_param_hw_array(dma16, int, dma, NULL, 0444); MODULE_PARM_DESC(dma16, "DMA16 # for jazz16 driver."); #define SB_JAZZ16_WAKEUP 0xaf diff --git a/sound/isa/sb/sb16.c b/sound/isa/sb/sb16.c index 4a7d7c8..3b2e4f4 100644 --- a/sound/isa/sb/sb16.c +++ b/sound/isa/sb/sb16.c @@ -99,21 +99,21 @@ MODULE_PARM_DESC(enable, "Enable SoundBlaster 16 soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for SB16 driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for SB16 driver."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for SB16 PnP driver."); #ifdef SNDRV_SBAWE_EMU8000 -module_param_array(awe_port, long, NULL, 0444); +module_param_hw_array(awe_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(awe_port, "AWE port # for SB16 PnP driver."); #endif -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for SB16 driver."); -module_param_array(dma8, int, NULL, 0444); +module_param_hw_array(dma8, int, dma, NULL, 0444); MODULE_PARM_DESC(dma8, "8-bit DMA # for SB16 driver."); -module_param_array(dma16, int, NULL, 0444); +module_param_hw_array(dma16, int, dma, NULL, 0444); MODULE_PARM_DESC(dma16, "16-bit DMA # for SB16 driver."); module_param_array(mic_agc, int, NULL, 0444); MODULE_PARM_DESC(mic_agc, "Mic Auto-Gain-Control switch."); diff --git a/sound/isa/sb/sb8.c b/sound/isa/sb/sb8.c index ad42d23..d77dcba 100644 --- a/sound/isa/sb/sb8.c +++ b/sound/isa/sb/sb8.c @@ -47,11 +47,11 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for Sound Blaster soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Sound Blaster soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for SB8 driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for SB8 driver."); -module_param_array(dma8, int, NULL, 0444); +module_param_hw_array(dma8, int, dma, NULL, 0444); MODULE_PARM_DESC(dma8, "8-bit DMA # for SB8 driver."); struct snd_sb8 { diff --git a/sound/isa/sc6000.c b/sound/isa/sc6000.c index b61a663..c09d9b9 100644 --- a/sound/isa/sc6000.c +++ b/sound/isa/sc6000.c @@ -64,17 +64,17 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for sc-6000 based soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable sc-6000 based soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for sc-6000 driver."); -module_param_array(mss_port, long, NULL, 0444); +module_param_hw_array(mss_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mss_port, "MSS Port # for sc-6000 driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for sc-6000 driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for sc-6000 driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for sc-6000 driver."); -module_param_array(dma, int, NULL, 0444); +module_param_hw_array(dma, int, dma, NULL, 0444); MODULE_PARM_DESC(dma, "DMA # for sc-6000 driver."); module_param_array(joystick, bool, NULL, 0444); MODULE_PARM_DESC(joystick, "Enable gameport."); diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index fdcfa29..54f5758a 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -63,22 +63,22 @@ MODULE_PARM_DESC(index, "Index number for SoundScape soundcard"); module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "Description for SoundScape card"); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for SoundScape driver."); -module_param_array(wss_port, long, NULL, 0444); +module_param_hw_array(wss_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(wss_port, "WSS Port # for SoundScape driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for SoundScape driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU401 IRQ # for SoundScape driver."); -module_param_array(dma, int, NULL, 0444); +module_param_hw_array(dma, int, dma, NULL, 0444); MODULE_PARM_DESC(dma, "DMA # for SoundScape driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for SoundScape driver."); module_param_array(joystick, bool, NULL, 0444); diff --git a/sound/isa/wavefront/wavefront.c b/sound/isa/wavefront/wavefront.c index a0987a5..da4e9a8 100644 --- a/sound/isa/wavefront/wavefront.c +++ b/sound/isa/wavefront/wavefront.c @@ -63,23 +63,23 @@ MODULE_PARM_DESC(enable, "Enable WaveFront soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "ISA PnP detection for WaveFront soundcards."); #endif -module_param_array(cs4232_pcm_port, long, NULL, 0444); +module_param_hw_array(cs4232_pcm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(cs4232_pcm_port, "Port # for CS4232 PCM interface."); -module_param_array(cs4232_pcm_irq, int, NULL, 0444); +module_param_hw_array(cs4232_pcm_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(cs4232_pcm_irq, "IRQ # for CS4232 PCM interface."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for CS4232 PCM interface."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for CS4232 PCM interface."); -module_param_array(cs4232_mpu_port, long, NULL, 0444); +module_param_hw_array(cs4232_mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(cs4232_mpu_port, "port # for CS4232 MPU-401 interface."); -module_param_array(cs4232_mpu_irq, int, NULL, 0444); +module_param_hw_array(cs4232_mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(cs4232_mpu_irq, "IRQ # for CS4232 MPU-401 interface."); -module_param_array(ics2115_irq, int, NULL, 0444); +module_param_hw_array(ics2115_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(ics2115_irq, "IRQ # for ICS2115."); -module_param_array(ics2115_port, long, NULL, 0444); +module_param_hw_array(ics2115_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(ics2115_port, "Port # for ICS2115."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port #."); module_param_array(use_cs4232_midi, bool, NULL, 0444); MODULE_PARM_DESC(use_cs4232_midi, "Use CS4232 MPU-401 interface (inaccessibly located inside your computer)"); diff --git a/sound/oss/ad1848.c b/sound/oss/ad1848.c index f6156d8..2421f59 100644 --- a/sound/oss/ad1848.c +++ b/sound/oss/ad1848.c @@ -2805,10 +2805,10 @@ static int __initdata dma = -1; static int __initdata dma2 = -1; static int __initdata type = 0; -module_param(io, int, 0); /* I/O for a raw AD1848 card */ -module_param(irq, int, 0); /* IRQ to use */ -module_param(dma, int, 0); /* First DMA channel */ -module_param(dma2, int, 0); /* Second DMA channel */ +module_param_hw(io, int, ioport, 0); /* I/O for a raw AD1848 card */ +module_param_hw(irq, int, irq, 0); /* IRQ to use */ +module_param_hw(dma, int, dma, 0); /* First DMA channel */ +module_param_hw(dma2, int, dma, 0); /* Second DMA channel */ module_param(type, int, 0); /* Card type */ module_param(deskpro_xl, bool, 0); /* Special magic for Deskpro XL boxen */ module_param(deskpro_m, bool, 0); /* Special magic for Deskpro M box */ diff --git a/sound/oss/aedsp16.c b/sound/oss/aedsp16.c index bb477d5..f058ed6 100644 --- a/sound/oss/aedsp16.c +++ b/sound/oss/aedsp16.c @@ -1303,17 +1303,17 @@ static int __initdata mpu_irq = -1; static int __initdata mss_base = -1; static int __initdata mpu_base = -1; -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); MODULE_PARM_DESC(io, "I/O base address (0x220 0x240)"); -module_param(irq, int, 0); +module_param_hw(irq, int, irq, 0); MODULE_PARM_DESC(irq, "IRQ line (5 7 9 10 11)"); -module_param(dma, int, 0); +module_param_hw(dma, int, dma, 0); MODULE_PARM_DESC(dma, "dma line (0 1 3)"); -module_param(mpu_irq, int, 0); +module_param_hw(mpu_irq, int, irq, 0); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ line (5 7 9 10 0)"); -module_param(mss_base, int, 0); +module_param_hw(mss_base, int, ioport, 0); MODULE_PARM_DESC(mss_base, "MSS emulation I/O base address (0x530 0xE80)"); -module_param(mpu_base, int, 0); +module_param_hw(mpu_base, int, ioport, 0); MODULE_PARM_DESC(mpu_base,"MPU-401 I/O base address (0x300 0x310 0x320 0x330)"); MODULE_AUTHOR("Riccardo Facchetti <fizban@tin.it>"); MODULE_DESCRIPTION("Audio Excel DSP 16 Driver Version " VERSION); diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c index 8627350..20e8fa4 100644 --- a/sound/oss/mpu401.c +++ b/sound/oss/mpu401.c @@ -1748,8 +1748,8 @@ static struct address_info cfg; static int io = -1; static int irq = -1; -module_param(irq, int, 0); -module_param(io, int, 0); +module_param_hw(irq, int, irq, 0); +module_param_hw(io, int, ioport, 0); static int __init init_mpu401(void) { diff --git a/sound/oss/msnd_pinnacle.c b/sound/oss/msnd_pinnacle.c index f34ec01..d2abc2c 100644 --- a/sound/oss/msnd_pinnacle.c +++ b/sound/oss/msnd_pinnacle.c @@ -1727,22 +1727,22 @@ static int calibrate_signal __initdata = CONFIG_MSND_CALSIGNAL; #endif /* MODULE */ -module_param (io, int, 0); -module_param (irq, int, 0); -module_param (mem, int, 0); +module_param_hw (io, int, ioport, 0); +module_param_hw (irq, int, irq, 0); +module_param_hw (mem, int, iomem, 0); module_param (write_ndelay, int, 0); module_param (fifosize, int, 0); module_param (calibrate_signal, int, 0); #ifndef MSND_CLASSIC module_param (digital, bool, 0); -module_param (cfg, int, 0); +module_param_hw (cfg, int, ioport, 0); module_param (reset, int, 0); -module_param (mpu_io, int, 0); -module_param (mpu_irq, int, 0); -module_param (ide_io0, int, 0); -module_param (ide_io1, int, 0); -module_param (ide_irq, int, 0); -module_param (joystick_io, int, 0); +module_param_hw (mpu_io, int, ioport, 0); +module_param_hw (mpu_irq, int, irq, 0); +module_param_hw (ide_io0, int, ioport, 0); +module_param_hw (ide_io1, int, ioport, 0); +module_param_hw (ide_irq, int, irq, 0); +module_param_hw (joystick_io, int, ioport, 0); #endif static int __init msnd_init(void) diff --git a/sound/oss/opl3.c b/sound/oss/opl3.c index b6d19ad..f0f5b5b 100644 --- a/sound/oss/opl3.c +++ b/sound/oss/opl3.c @@ -1200,7 +1200,7 @@ static int me; static int io = -1; -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); static int __init init_opl3 (void) { diff --git a/sound/oss/pas2_card.c b/sound/oss/pas2_card.c index b07954a..769fca6 100644 --- a/sound/oss/pas2_card.c +++ b/sound/oss/pas2_card.c @@ -383,15 +383,15 @@ static int __initdata sb_irq = -1; static int __initdata sb_dma = -1; static int __initdata sb_dma16 = -1; -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(dma, int, 0); -module_param(dma16, int, 0); - -module_param(sb_io, int, 0); -module_param(sb_irq, int, 0); -module_param(sb_dma, int, 0); -module_param(sb_dma16, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); +module_param_hw(dma, int, dma, 0); +module_param_hw(dma16, int, dma, 0); + +module_param_hw(sb_io, int, ioport, 0); +module_param_hw(sb_irq, int, irq, 0); +module_param_hw(sb_dma, int, dma, 0); +module_param_hw(sb_dma16, int, dma, 0); module_param(joystick, bool, 0); module_param(symphony, bool, 0); diff --git a/sound/oss/pss.c b/sound/oss/pss.c index 81314f9..33c3a44 100644 --- a/sound/oss/pss.c +++ b/sound/oss/pss.c @@ -1139,19 +1139,19 @@ static bool pss_no_sound = 0; /* Just configure non-sound components */ static bool pss_keep_settings = 1; /* Keep hardware settings at module exit */ static char *pss_firmware = "/etc/sound/pss_synth"; -module_param(pss_io, int, 0); +module_param_hw(pss_io, int, ioport, 0); MODULE_PARM_DESC(pss_io, "Set i/o base of PSS card (probably 0x220 or 0x240)"); -module_param(mss_io, int, 0); +module_param_hw(mss_io, int, ioport, 0); MODULE_PARM_DESC(mss_io, "Set WSS (audio) i/o base (0x530, 0x604, 0xE80, 0xF40, or other. Address must end in 0 or 4 and must be from 0x100 to 0xFF4)"); -module_param(mss_irq, int, 0); +module_param_hw(mss_irq, int, irq, 0); MODULE_PARM_DESC(mss_irq, "Set WSS (audio) IRQ (3, 5, 7, 9, 10, 11, 12)"); -module_param(mss_dma, int, 0); +module_param_hw(mss_dma, int, dma, 0); MODULE_PARM_DESC(mss_dma, "Set WSS (audio) DMA (0, 1, 3)"); -module_param(mpu_io, int, 0); +module_param_hw(mpu_io, int, ioport, 0); MODULE_PARM_DESC(mpu_io, "Set MIDI i/o base (0x330 or other. Address must be on 4 location boundaries and must be from 0x100 to 0xFFC)"); -module_param(mpu_irq, int, 0); +module_param_hw(mpu_irq, int, irq, 0); MODULE_PARM_DESC(mpu_irq, "Set MIDI IRQ (3, 5, 7, 9, 10, 11, 12)"); -module_param(pss_cdrom_port, int, 0); +module_param_hw(pss_cdrom_port, int, ioport, 0); MODULE_PARM_DESC(pss_cdrom_port, "Set the PSS CDROM port i/o base (0x340 or other)"); module_param(pss_enable_joystick, bool, 0); MODULE_PARM_DESC(pss_enable_joystick, "Enables the PSS joystick port (1 to enable, 0 to disable)"); diff --git a/sound/oss/sb_card.c b/sound/oss/sb_card.c index fb5d725..2a92cfe 100644 --- a/sound/oss/sb_card.c +++ b/sound/oss/sb_card.c @@ -61,15 +61,15 @@ static int __initdata uart401 = 0; static int __initdata pnp = 0; #endif -module_param(io, int, 000); +module_param_hw(io, int, ioport, 000); MODULE_PARM_DESC(io, "Soundblaster i/o base address (0x220,0x240,0x260,0x280)"); -module_param(irq, int, 000); +module_param_hw(irq, int, irq, 000); MODULE_PARM_DESC(irq, "IRQ (5,7,9,10)"); -module_param(dma, int, 000); +module_param_hw(dma, int, dma, 000); MODULE_PARM_DESC(dma, "8-bit DMA channel (0,1,3)"); -module_param(dma16, int, 000); +module_param_hw(dma16, int, dma, 000); MODULE_PARM_DESC(dma16, "16-bit DMA channel (5,6,7)"); -module_param(mpu_io, int, 000); +module_param_hw(mpu_io, int, ioport, 000); MODULE_PARM_DESC(mpu_io, "MPU base address"); module_param(type, int, 000); MODULE_PARM_DESC(type, "You can set this to specific card type (doesn't " \ diff --git a/sound/oss/trix.c b/sound/oss/trix.c index 3c494dc..a57bc63 100644 --- a/sound/oss/trix.c +++ b/sound/oss/trix.c @@ -413,15 +413,15 @@ static int __initdata sb_irq = -1; static int __initdata mpu_io = -1; static int __initdata mpu_irq = -1; -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(dma, int, 0); -module_param(dma2, int, 0); -module_param(sb_io, int, 0); -module_param(sb_dma, int, 0); -module_param(sb_irq, int, 0); -module_param(mpu_io, int, 0); -module_param(mpu_irq, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); +module_param_hw(dma, int, dma, 0); +module_param_hw(dma2, int, dma, 0); +module_param_hw(sb_io, int, ioport, 0); +module_param_hw(sb_dma, int, dma, 0); +module_param_hw(sb_irq, int, irq, 0); +module_param_hw(mpu_io, int, ioport, 0); +module_param_hw(mpu_irq, int, irq, 0); module_param(joystick, bool, 0); static int __init init_trix(void) diff --git a/sound/oss/uart401.c b/sound/oss/uart401.c index dae4d43..83dcc85 100644 --- a/sound/oss/uart401.c +++ b/sound/oss/uart401.c @@ -429,8 +429,8 @@ static struct address_info cfg_mpu; static int io = -1; static int irq = -1; -module_param(io, int, 0444); -module_param(irq, int, 0444); +module_param_hw(io, int, ioport, 0444); +module_param_hw(irq, int, irq, 0444); static int __init init_uart401(void) diff --git a/sound/oss/uart6850.c b/sound/oss/uart6850.c index 1079133..eda32d7 100644 --- a/sound/oss/uart6850.c +++ b/sound/oss/uart6850.c @@ -315,8 +315,8 @@ static struct address_info cfg_mpu; static int __initdata io = -1; static int __initdata irq = -1; -module_param(io, int, 0); -module_param(irq, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); static int __init init_uart6850(void) { diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c index 0b8d0de..4f0c3a2 100644 --- a/sound/oss/waveartist.c +++ b/sound/oss/waveartist.c @@ -2036,8 +2036,8 @@ __setup("waveartist=", setup_waveartist); #endif MODULE_DESCRIPTION("Rockwell WaveArtist RWA-010 sound driver"); -module_param(io, int, 0); /* IO base */ -module_param(irq, int, 0); /* IRQ */ -module_param(dma, int, 0); /* DMA */ -module_param(dma2, int, 0); /* DMA2 */ +module_param_hw(io, int, ioport, 0); /* IO base */ +module_param_hw(irq, int, irq, 0); /* IRQ */ +module_param_hw(dma, int, dma, 0); /* DMA */ +module_param_hw(dma2, int, dma, 0); /* DMA2 */ MODULE_LICENSE("GPL"); diff --git a/sound/pci/als4000.c b/sound/pci/als4000.c index 92bc06d..7844a75 100644 --- a/sound/pci/als4000.c +++ b/sound/pci/als4000.c @@ -102,7 +102,7 @@ MODULE_PARM_DESC(id, "ID string for ALS4000 soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable ALS4000 soundcard."); #ifdef SUPPORT_JOYSTICK -module_param_array(joystick_port, int, NULL, 0444); +module_param_hw_array(joystick_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(joystick_port, "Joystick port address for ALS4000 soundcard. (0 = disabled)"); #endif diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c index 227c9d3..745a0a3 100644 --- a/sound/pci/cmipci.c +++ b/sound/pci/cmipci.c @@ -68,14 +68,14 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for C-Media PCI soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable C-Media PCI soundcard."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port."); module_param_array(soft_ac3, bool, NULL, 0444); MODULE_PARM_DESC(soft_ac3, "Software-conversion of raw SPDIF packets (model 033 only)."); #ifdef SUPPORT_JOYSTICK -module_param_array(joystick_port, int, NULL, 0444); +module_param_hw_array(joystick_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(joystick_port, "Joystick port address."); #endif diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c index 5d10349..09a63ef 100644 --- a/sound/pci/ens1370.c +++ b/sound/pci/ens1370.c @@ -106,7 +106,7 @@ module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Ensoniq AudioPCI soundcard."); #ifdef SUPPORT_JOYSTICK #ifdef CHIP1371 -module_param_array(joystick_port, int, NULL, 0444); +module_param_hw_array(joystick_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(joystick_port, "Joystick port address."); #else module_param_array(joystick, bool, NULL, 0444); diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c index 19c9df6..f067c76 100644 --- a/sound/pci/riptide/riptide.c +++ b/sound/pci/riptide/riptide.c @@ -137,12 +137,12 @@ MODULE_PARM_DESC(id, "ID string for Riptide soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Riptide soundcard."); #ifdef SUPPORT_JOYSTICK -module_param_array(joystick_port, int, NULL, 0444); +module_param_hw_array(joystick_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(joystick_port, "Joystick port # for Riptide soundcard."); #endif -module_param_array(mpu_port, int, NULL, 0444); +module_param_hw_array(mpu_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU401 port # for Riptide driver."); -module_param_array(opl3_port, int, NULL, 0444); +module_param_hw_array(opl3_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(opl3_port, "OPL3 port # for Riptide driver."); /* diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c index a6aa48c..8e3d4ec 100644 --- a/sound/pci/sonicvibes.c +++ b/sound/pci/sonicvibes.c @@ -66,7 +66,7 @@ module_param_array(reverb, bool, NULL, 0444); MODULE_PARM_DESC(reverb, "Enable reverb (SRAM is present) for S3 SonicVibes soundcard."); module_param_array(mge, bool, NULL, 0444); MODULE_PARM_DESC(mge, "MIC Gain Enable for S3 SonicVibes soundcard."); -module_param(dmaio, uint, 0444); +module_param_hw(dmaio, uint, ioport, 0444); MODULE_PARM_DESC(dmaio, "DDMA i/o base address for S3 SonicVibes soundcard."); /* diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index d078e86..b6c84d1 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -92,7 +92,7 @@ module_param(index, int, 0444); MODULE_PARM_DESC(index, "Index value for VIA 82xx bridge."); module_param(id, charp, 0444); MODULE_PARM_DESC(id, "ID string for VIA 82xx bridge."); -module_param(mpu_port, long, 0444); +module_param_hw(mpu_port, long, ioport, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port. (VT82C686x only)"); #ifdef SUPPORT_JOYSTICK module_param(joystick, bool, 0444); diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c index 812e27a..4faf3e1 100644 --- a/sound/pci/ymfpci/ymfpci.c +++ b/sound/pci/ymfpci/ymfpci.c @@ -55,12 +55,12 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for the Yamaha DS-1 PCI soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Yamaha DS-1 soundcard."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 Port."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM OPL-3 Port."); #ifdef SUPPORT_JOYSTICK -module_param_array(joystick_port, long, NULL, 0444); +module_param_hw_array(joystick_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(joystick_port, "Joystick port address"); #endif module_param_array(rear_switch, bool, NULL, 0444); |
