diff options
| -rw-r--r-- | Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt | 76 |
1 files changed, 42 insertions, 34 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt index 53cd146..3ae0612 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt @@ -19,32 +19,42 @@ Required properties: with PMIC variant but is typically something like 2.2 or 1.8V. The following required properties are standard for IO channels, see -iio-bindings.txt for more details: +iio-bindings.txt for more details, but notice that this particular +ADC has a special addressing scheme that require two cells for +identifying each ADC channel: -- #address-cells: should be set to <1> +- #address-cells: should be set to <2>, the first cell is the + prescaler (on PM8058) or premux (on PM8921) with two valid bits + so legal values are 0x00, 0x01 or 0x02. The second cell + is the main analog mux setting (0x00..0x0f). The combination + of prescaler/premux and analog mux uniquely addresses a hardware + channel on all systems. - #size-cells: should be set to <0> -- #io-channel-cells: should be set to <1> +- #io-channel-cells: should be set to <2>, again the cells are + precaler or premux followed by the analog muxing line. - interrupts: should refer to the parent PMIC interrupt controller and reference the proper ADC interrupt. Required subnodes: -The ADC channels are configured as subnodes of the ADC. Since some of -them are used for calibrating the ADC, these nodes are compulsory: +The ADC channels are configured as subnodes of the ADC. + +Since some of them are used for calibrating the ADC, these nodes are +compulsory: adc-channel@c { - reg = <0x0c>; + reg = <0x00 0x0c>; }; adc-channel@d { - reg = <0x0d>; + reg = <0x00 0x0d>; }; adc-channel@f { - reg = <0x0f>; + reg = <0x00 0x0f>; }; These three nodes are used for absolute and ratiometric calibration @@ -52,13 +62,13 @@ and only need to have these reg values: they are by hardware definition 1:1 ratio converters that sample 625, 1250 and 0 milliV and create an interpolation calibration for all other ADCs. -Optional subnodes: any channels other than channel 0x0c, 0x0d and -0x0f are optional. +Optional subnodes: any channels other than channels [0x00 0x0c], +[0x00 0x0d] and [0x00 0x0f] are optional. Required channel node properties: - reg: should contain the hardware channel number in the range - 0 .. 0x0f (4 bits). The hardware only supports 16 channels. + 0 .. 0xff (8 bits). Optional channel node properties: @@ -94,56 +104,54 @@ Example: xoadc: xoadc@197 { compatible = "qcom,pm8058-adc"; reg = <0x197>; - interrupt-parent = <&pm8058>; - interrupts = <76 1>; - #address-cells = <1>; + interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>; + #address-cells = <2>; #size-cells = <0>; - #io-channel-cells = <1>; + #io-channel-cells = <2>; vcoin: adc-channel@0 { - reg = <0x00>; + reg = <0x00 0x00>; }; vbat: adc-channel@1 { - reg = <0x01>; + reg = <0x00 0x01>; }; dcin: adc-channel@2 { - reg = <0x02>; + reg = <0x00 0x02>; }; ichg: adc-channel@3 { - reg = <0x03>; + reg = <0x00 0x03>; }; vph_pwr: adc-channel@4 { - reg = <0x04>; + reg = <0x00 0x04>; }; usb_vbus: adc-channel@a { - reg = <0x0a>; + reg = <0x00 0x0a>; }; die_temp: adc-channel@b { - reg = <0x0b>; + reg = <0x00 0x0b>; }; ref_625mv: adc-channel@c { - reg = <0x0c>; + reg = <0x00 0x0c>; }; ref_1250mv: adc-channel@d { - reg = <0x0d>; + reg = <0x00 0x0d>; }; ref_325mv: adc-channel@e { - reg = <0x0e>; + reg = <0x00 0x0e>; }; ref_muxoff: adc-channel@f { - reg = <0x0f>; + reg = <0x00 0x0f>; }; }; - /* IIO client node */ iio-hwmon { compatible = "iio-hwmon"; - io-channels = <&xoadc 0x01>, /* Battery */ - <&xoadc 0x02>, /* DC in (charger) */ - <&xoadc 0x04>, /* VPH the main system voltage */ - <&xoadc 0x0b>, /* Die temperature */ - <&xoadc 0x0c>, /* Reference voltage 1.25V */ - <&xoadc 0x0d>, /* Reference voltage 0.625V */ - <&xoadc 0x0e>; /* Reference voltage 0.325V */ + io-channels = <&xoadc 0x00 0x01>, /* Battery */ + <&xoadc 0x00 0x02>, /* DC in (charger) */ + <&xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&xoadc 0x00 0x0b>, /* Die temperature */ + <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ }; |
