summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/usb/core/hub.c46
-rw-r--r--drivers/usb/host/xhci-pci.c1
-rw-r--r--drivers/usb/host/xhci-plat.c1
-rw-r--r--drivers/usb/host/xhci-ring.c6
-rw-r--r--drivers/usb/host/xhci.c41
-rw-r--r--drivers/usb/host/xhci.h11
-rw-r--r--include/linux/usb/hcd.h2
7 files changed, 87 insertions, 21 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 32e1035..6a11eff 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2498,6 +2498,21 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
#define HUB_LONG_RESET_TIME 200
#define HUB_RESET_TIMEOUT 800
+/*
+ * "New scheme" enumeration causes an extra state transition to be
+ * exposed to an xhci host and causes USB3 devices to receive control
+ * commands in the default state. This has been seen to cause
+ * enumeration failures, so disable this enumeration scheme for USB3
+ * devices.
+ */
+static bool use_new_scheme(struct usb_device *udev, int retry)
+{
+ if (udev->speed == USB_SPEED_SUPER)
+ return false;
+
+ return USE_NEW_SCHEME(retry);
+}
+
static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay, bool warm);
@@ -3956,6 +3971,20 @@ static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
}
}
+static int hub_enable_device(struct usb_device *udev)
+{
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+ if (!hcd->driver->enable_device)
+ return 0;
+ if (udev->state == USB_STATE_ADDRESS)
+ return 0;
+ if (udev->state != USB_STATE_DEFAULT)
+ return -EINVAL;
+
+ return hcd->driver->enable_device(hcd, udev);
+}
+
/* Reset device, (re)assign address, get device descriptor.
* Device connection must be stable, no more debouncing needed.
* Returns device in USB_STATE_ADDRESS, except on error.
@@ -4068,7 +4097,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
* this area, and this is how Linux has done it for ages.
* Change it cautiously.
*
- * NOTE: If USE_NEW_SCHEME() is true we will start by issuing
+ * NOTE: If use_new_scheme() is true we will start by issuing
* a 64-byte GET_DESCRIPTOR request. This is what Windows does,
* so it may help with some non-standards-compliant devices.
* Otherwise we start with SET_ADDRESS and then try to read the
@@ -4076,10 +4105,17 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
* value.
*/
for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
- if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3)) {
+ bool did_new_scheme = false;
+
+ if (use_new_scheme(udev, retry_counter)) {
struct usb_device_descriptor *buf;
int r = 0;
+ did_new_scheme = true;
+ retval = hub_enable_device(udev);
+ if (retval < 0)
+ goto fail;
+
#define GET_DESCRIPTOR_BUFSIZE 64
buf = kmalloc(GET_DESCRIPTOR_BUFSIZE, GFP_NOIO);
if (!buf) {
@@ -4168,7 +4204,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
* - read ep0 maxpacket even for high and low speed,
*/
msleep(10);
- if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3))
+ /* use_new_scheme() checks the speed which may have
+ * changed since the initial look so we cache the result
+ * in did_new_scheme
+ */
+ if (did_new_scheme)
break;
}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index b8dffd5..4221dee 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -331,6 +331,7 @@ static const struct hc_driver xhci_pci_hc_driver = {
.check_bandwidth = xhci_check_bandwidth,
.reset_bandwidth = xhci_reset_bandwidth,
.address_device = xhci_address_device,
+ .enable_device = xhci_enable_device,
.update_hub_device = xhci_update_hub_device,
.reset_device = xhci_discover_or_reset_device,
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 9d29aa1..8abda5c 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -69,6 +69,7 @@ static const struct hc_driver xhci_plat_xhci_driver = {
.check_bandwidth = xhci_check_bandwidth,
.reset_bandwidth = xhci_reset_bandwidth,
.address_device = xhci_address_device,
+ .enable_device = xhci_enable_device,
.update_hub_device = xhci_update_hub_device,
.reset_device = xhci_discover_or_reset_device,
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index fe9208a..d26cd94 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -4004,12 +4004,12 @@ int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id)
/* Queue an address device command TRB */
int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
- u32 slot_id)
+ u32 slot_id, enum xhci_setup_dev setup)
{
return queue_command(xhci, lower_32_bits(in_ctx_ptr),
upper_32_bits(in_ctx_ptr), 0,
- TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id),
- false);
+ TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id)
+ | (setup == SETUP_CONTEXT_ONLY ? TRB_BSR : 0), false);
}
int xhci_queue_vendor_command(struct xhci_hcd *xhci,
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 7fe6f66..d68ec1a 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3709,13 +3709,15 @@ disable_slot:
}
/*
- * Issue an Address Device command (which will issue a SetAddress request to
- * the device).
+ * Issue an Address Device command and optionally send a corresponding
+ * SetAddress request to the device.
* We should be protected by the usb_address0_mutex in khubd's hub_port_init, so
* we should only issue and wait on one address command at the same time.
*/
-int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
+static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
+ enum xhci_setup_dev setup)
{
+ const char *act = setup == SETUP_CONTEXT_ONLY ? "context" : "address";
unsigned long flags;
int timeleft;
struct xhci_virt_device *virt_dev;
@@ -3773,7 +3775,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
spin_lock_irqsave(&xhci->lock, flags);
cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring);
ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
- udev->slot_id);
+ udev->slot_id, setup);
if (ret) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
@@ -3791,8 +3793,8 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
* command on a timeout.
*/
if (timeleft <= 0) {
- xhci_warn(xhci, "%s while waiting for address device command\n",
- timeleft == 0 ? "Timeout" : "Signal");
+ xhci_warn(xhci, "%s while waiting for setup %s command\n",
+ timeleft == 0 ? "Timeout" : "Signal", act);
/* cancel the address device command */
ret = xhci_cancel_cmd(xhci, NULL, cmd_trb);
if (ret < 0)
@@ -3803,26 +3805,27 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
switch (virt_dev->cmd_status) {
case COMP_CTX_STATE:
case COMP_EBADSLT:
- xhci_err(xhci, "Setup ERROR: address device command for slot %d.\n",
- udev->slot_id);
+ xhci_err(xhci, "Setup ERROR: setup %s command for slot %d.\n",
+ act, udev->slot_id);
ret = -EINVAL;
break;
case COMP_TX_ERR:
- dev_warn(&udev->dev, "Device not responding to set address.\n");
+ dev_warn(&udev->dev, "Device not responding to setup %s.\n", act);
ret = -EPROTO;
break;
case COMP_DEV_ERR:
- dev_warn(&udev->dev, "ERROR: Incompatible device for address "
- "device command.\n");
+ dev_warn(&udev->dev,
+ "ERROR: Incompatible device for setup %s command\n", act);
ret = -ENODEV;
break;
case COMP_SUCCESS:
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
- "Successful Address Device command");
+ "Successful setup %s command", act);
break;
default:
- xhci_err(xhci, "ERROR: unexpected command completion "
- "code 0x%x.\n", virt_dev->cmd_status);
+ xhci_err(xhci,
+ "ERROR: unexpected setup %s command completion code 0x%x.\n",
+ act, virt_dev->cmd_status);
xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
trace_xhci_address_ctx(xhci, virt_dev->out_ctx, 1);
@@ -3868,6 +3871,16 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
return 0;
}
+int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ return xhci_setup_device(hcd, udev, SETUP_CONTEXT_ADDRESS);
+}
+
+int xhci_enable_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ return xhci_setup_device(hcd, udev, SETUP_CONTEXT_ONLY);
+}
+
/*
* Transfer the port index into real index in the HW port status
* registers. Caculate offset between the port's PORTSC register
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 7807f62..24344aab 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1108,6 +1108,14 @@ struct xhci_event_cmd {
};
/* flags bitmasks */
+
+/* Address device - disable SetAddress */
+#define TRB_BSR (1<<9)
+enum xhci_setup_dev {
+ SETUP_CONTEXT_ONLY,
+ SETUP_CONTEXT_ADDRESS,
+};
+
/* bits 16:23 are the virtual function ID */
/* bits 24:31 are the slot ID */
#define TRB_TO_SLOT_ID(p) (((p) & (0xff<<24)) >> 24)
@@ -1760,6 +1768,7 @@ int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
struct usb_host_endpoint **eps, unsigned int num_eps,
gfp_t mem_flags);
int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_enable_device(struct usb_hcd *hcd, struct usb_device *udev);
int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev);
int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
struct usb_device *udev, int enable);
@@ -1783,7 +1792,7 @@ int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
void xhci_ring_cmd_db(struct xhci_hcd *xhci);
int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
- u32 slot_id);
+ u32 slot_id, enum xhci_setup_dev);
int xhci_queue_vendor_command(struct xhci_hcd *xhci,
u32 field1, u32 field2, u32 field3, u32 field4);
int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 758ce80..efe8d8a 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -353,6 +353,8 @@ struct hc_driver {
void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
/* Returns the hardware-chosen device address */
int (*address_device)(struct usb_hcd *, struct usb_device *udev);
+ /* prepares the hardware to send commands to the device */
+ int (*enable_device)(struct usb_hcd *, struct usb_device *udev);
/* Notifies the HCD after a hub descriptor is fetched.
* Will block.
*/
OpenPOWER on IntegriCloud