diff options
33 files changed, 366 insertions, 623 deletions
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index d1cd5f9..552507f 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -281,3 +281,16 @@ Why: The deferred output hooks are a layering violation causing unusual Who: Patrick McHardy <kaber@trash.net> --------------------------- + +What: frame diverter +When: November 2006 +Why: The frame diverter is included in most distribution kernels, but is + broken. It does not correctly handle many things: + - IPV6 + - non-linear skb's + - network device RCU on removal + - input frames not correctly checked for protocol errors + It also adds allocation overhead even if not enabled. + It is not clear if anyone is still using it. +Who: Stephen Hemminger <shemminger@osdl.org> + diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 7947ced..87a1733 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -697,6 +697,12 @@ running once the system is up. ips= [HW,SCSI] Adaptec / IBM ServeRAID controller See header of drivers/scsi/ips.c. + ports= [IP_VS_FTP] IPVS ftp helper module + Default is 21. + Up to 8 (IP_VS_APP_MAX_PORTS) ports + may be specified. + Format: <port>,<port>.... + irqfixup [HW] When an interrupt is not handled search all handlers for it. Intended to get systems with badly broken diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 3e0c017..90ed781 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -102,9 +102,15 @@ inet_peer_gc_maxtime - INTEGER TCP variables: tcp_abc - INTEGER - Controls Appropriate Byte Count defined in RFC3465. If set to - 0 then does congestion avoid once per ack. 1 is conservative - value, and 2 is more agressive. + Controls Appropriate Byte Count (ABC) defined in RFC3465. + ABC is a way of increasing congestion window (cwnd) more slowly + in response to partial acknowledgments. + Possible values are: + 0 increase cwnd once per acknowledgment (no ABC) + 1 increase cwnd once per acknowledgment of full sized segment + 2 allow increase cwnd by two if acknowledgment is + of two segments to compensate for delayed acknowledgments. + Default: 0 (off) tcp_syn_retries - INTEGER Number of times initial SYNs for an active TCP connection attempt diff --git a/MAINTAINERS b/MAINTAINERS index d13f985..7a08cdb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -416,7 +416,7 @@ S: Supported ATM P: Chas Williams M: chas@cmf.nrl.navy.mil -L: linux-atm-general@lists.sourceforge.net +L: linux-atm-general@lists.sourceforge.net (subscribers-only) W: http://linux-atm.sourceforge.net S: Maintained @@ -2828,6 +2828,14 @@ M: hadi@cyberus.ca L: netdev@vger.kernel.org S: Maintained +TCP LOW PRIORITY MODULE +P: Wong Hoi Sing, Edison +M: hswong3i@gmail.com +P: Hung Hing Lun, Mike +M: hlhung3i@gmail.com +W: http://tcp-lp-mod.sourceforge.net/ +S: Maintained + TI OMAP RANDOM NUMBER GENERATOR SUPPORT P: Deepak Saxena M: dsaxena@plexity.net diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig index 8a078d4..a4989f4 100644 --- a/arch/arm/configs/pnx4008_defconfig +++ b/arch/arm/configs/pnx4008_defconfig @@ -1,14 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc1 -# Thu Apr 6 17:05:58 2006 +# Linux kernel version: 2.6.18-rc6 +# Mon Sep 11 13:59:24 2006 # CONFIG_ARM=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -28,6 +32,7 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y # CONFIG_IKCONFIG is not set @@ -44,14 +49,15 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set -CONFIG_OBSOLETE_INTERMODULE=m # # Loadable module support @@ -84,18 +90,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set # CONFIG_ARCH_IOP3XX is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_L7200 is not set +CONFIG_ARCH_PNX4008=y # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set @@ -103,13 +117,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_AT91RM9200 is not set -CONFIG_ARCH_PNX4008=y # # Processor Type @@ -138,15 +145,7 @@ CONFIG_ARM_THUMB=y # # PCCARD (PCMCIA/CardBus) support # -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y - -# -# PC-card bridges -# +# CONFIG_PCCARD is not set # # Kernel Features @@ -164,13 +163,14 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set CONFIG_ALIGNMENT_TRAP=y # # Boot options # -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200" # CONFIG_XIP_KERNEL is not set @@ -181,7 +181,8 @@ CONFIG_CMDLINE="mem=64M console=ttyS0,115200" # # At least one emulation must be selected # -# CONFIG_FPE_NWFPE is not set +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set # CONFIG_FPE_FASTFPE is not set # CONFIG_VFP is not set @@ -199,7 +200,7 @@ CONFIG_BINFMT_MISC=m CONFIG_PM=y CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set -CONFIG_APM=m +# CONFIG_APM is not set # # Networking @@ -210,12 +211,12 @@ CONFIG_NET=y # Networking options # # CONFIG_NETDEBUG is not set -CONFIG_PACKET=m +CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -CONFIG_UNIX=m +CONFIG_UNIX=y CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y @@ -227,10 +228,12 @@ CONFIG_IP_ROUTE_FWMARK=y CONFIG_IP_ROUTE_MULTIPATH=y # CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y @@ -241,6 +244,8 @@ CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -287,7 +292,10 @@ CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_IPV6_TUNNEL=m +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y @@ -313,6 +321,7 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set # CONFIG_IP_NF_H323 is not set +# CONFIG_IP_NF_SIP is not set CONFIG_IP_NF_QUEUE=m # @@ -384,7 +393,7 @@ CONFIG_LLC2=m CONFIG_IPX=m # CONFIG_IPX_INTERN is not set CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=y +CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y @@ -445,110 +454,9 @@ CONFIG_NET_ESTIMATOR=y # Network testing # CONFIG_NET_PKTGEN=m -CONFIG_HAMRADIO=y - -# -# Packet Radio protocols -# -CONFIG_AX25=m -# CONFIG_AX25_DAMA_SLAVE is not set -CONFIG_NETROM=m -CONFIG_ROSE=m - -# -# AX.25 network device drivers -# -CONFIG_MKISS=m -CONFIG_6PACK=m -CONFIG_BPQETHER=m -CONFIG_BAYCOM_SER_FDX=m -CONFIG_BAYCOM_SER_HDX=m -CONFIG_BAYCOM_PAR=m -CONFIG_BAYCOM_EPP=m -CONFIG_YAM=m -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m - -# -# Dongle support -# -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -# CONFIG_TOIM3232_DONGLE is not set -CONFIG_LITELINK_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m - -# -# Old SIR device drivers -# -CONFIG_IRPORT_SIR=m - -# -# Old Serial dongle support -# -# CONFIG_DONGLE_OLD is not set - -# -# FIR device drivers -# -CONFIG_USB_IRDA=m -CONFIG_SIGMATEL_FIR=m -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_CMTP=m -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIBCM203X=m -# CONFIG_BT_HCIBPA10X is not set -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set # CONFIG_IEEE80211_CRYPT_WEP is not set @@ -566,8 +474,9 @@ CONFIG_WIRELESS_EXT=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -577,11 +486,11 @@ CONFIG_FW_LOADER=m # # Memory Technology Devices (MTD) # -CONFIG_MTD=m +CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=m +CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=m +CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set @@ -591,22 +500,18 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # # User Modules And Translation Layers # -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -CONFIG_FTL=m -CONFIG_NFTL=m -CONFIG_NFTL_RW=y -CONFIG_INFTL=m +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers # -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_GEN_PROBE=m -# CONFIG_MTD_CFI_ADV_OPTIONS is not set +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -617,36 +522,27 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_CFI_UTIL=m -CONFIG_MTD_RAM=m -CONFIG_MTD_ROM=m -CONFIG_MTD_ABSENT=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set # CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -CONFIG_MTD_PHYSMAP_START=0x8000000 -CONFIG_MTD_PHYSMAP_LEN=0x4000000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set CONFIG_MTD_SLRAM=m CONFIG_MTD_PHRAM=m CONFIG_MTD_MTDRAM=m CONFIG_MTDRAM_TOTAL_SIZE=4096 CONFIG_MTDRAM_ERASE_SIZE=128 -CONFIG_MTD_BLKMTD=m # CONFIG_MTD_BLOCK2MTD is not set # @@ -663,14 +559,12 @@ CONFIG_MTD_DOCPROBE_ADDRESS=0 # # NAND Flash Device Drivers # -CONFIG_MTD_NAND=m +CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set -CONFIG_MTD_NAND_IDS=m -CONFIG_MTD_NAND_DISKONCHIP=m -# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 -# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set -# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_NANDSIM=m # # OneNAND Flash Device Drivers @@ -680,15 +574,7 @@ CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 # # Parallel port support # -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_FIFO=y -# CONFIG_PARPORT_PC_SUPERIO is not set -CONFIG_PARPORT_PC_PCMCIA=m -CONFIG_PARPORT_NOT_PC=y -# CONFIG_PARPORT_ARC is not set -# CONFIG_PARPORT_GSC is not set -CONFIG_PARPORT_1284=y +# CONFIG_PARPORT is not set # # Plug and Play support @@ -697,45 +583,15 @@ CONFIG_PARPORT_1284=y # # Block devices # -CONFIG_PARIDE=m -CONFIG_PARIDE_PARPORT=m - -# -# Parallel IDE high-level drivers -# -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m - -# -# Parallel IDE protocol modules -# -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -# CONFIG_PARIDE_EPATC8 is not set -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m # CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 @@ -743,34 +599,6 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_ATA_OVER_ETH is not set # -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=m -CONFIG_BLK_DEV_IDE=m - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=m -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -CONFIG_BLK_DEV_IDECD=m -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=m -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# # SCSI device support # # CONFIG_RAID_ATTRS is not set @@ -808,41 +636,12 @@ CONFIG_SCSI_FC_ATTRS=m # # CONFIG_ISCSI_TCP is not set CONFIG_SCSI_SATA=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -# CONFIG_SCSI_IZIP_EPP16 is not set -# CONFIG_SCSI_IZIP_SLOW_CTR is not set CONFIG_SCSI_DEBUG=m # -# PCMCIA SCSI adapter support -# -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m -CONFIG_PCMCIA_SYM53C500=m - -# # Multi-device support (RAID and LVM) # -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=m -# CONFIG_MD_RAID5_RESHAPE is not set -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -# CONFIG_DM_MULTIPATH is not set +# CONFIG_MD is not set # # Fusion MPT device support @@ -878,9 +677,6 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set -CONFIG_NET_POCKET=y -CONFIG_DE600=m -CONFIG_DE620=m # # Ethernet (1000 Mbit) @@ -904,49 +700,13 @@ CONFIG_NET_RADIO=y # Obsolete Wireless cards support (pre-802.11) # CONFIG_STRIP=m -CONFIG_PCMCIA_WAVELAN=m -CONFIG_PCMCIA_NETWAVE=m - -# -# Wireless 802.11 Frequency Hopping cards support -# -CONFIG_PCMCIA_RAYCS=m - -# -# Wireless 802.11b ISA/PCI cards support -# -CONFIG_HERMES=m -CONFIG_ATMEL=m - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_PCMCIA_HERMES=m -# CONFIG_PCMCIA_SPECTRUM is not set -CONFIG_AIRO_CS=m -CONFIG_PCMCIA_ATMEL=m -CONFIG_PCMCIA_WL3501=m +# CONFIG_USB_ZD1201 is not set # CONFIG_HOSTAP is not set -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -CONFIG_PCMCIA_AXNET=m # # Wan interfaces # CONFIG_WAN=y -CONFIG_SYNCLINK_SYNCPPP=m CONFIG_HDLC=m CONFIG_HDLC_RAW=y CONFIG_HDLC_RAW_ETH=y @@ -966,7 +726,6 @@ CONFIG_X25_ASY=m # # CONFIG_ATM_DUMMY is not set CONFIG_ATM_TCP=m -CONFIG_PLIP=m CONFIG_PPP=m CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y @@ -991,114 +750,7 @@ CONFIG_NET_POLL_CONTROLLER=y # # ISDN subsystem # -CONFIG_ISDN=m - -# -# Old ISDN4Linux -# -CONFIG_ISDN_I4L=m -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_IPPP_FILTER=y -CONFIG_ISDN_PPP_BSDCOMP=m -CONFIG_ISDN_AUDIO=y -CONFIG_ISDN_TTY_FAX=y -CONFIG_ISDN_X25=y - -# -# ISDN feature submodules -# -CONFIG_ISDN_DRV_LOOP=m -CONFIG_ISDN_DIVERSION=m - -# -# ISDN4Linux hardware drivers -# - -# -# Passive cards -# -CONFIG_ISDN_DRV_HISAX=m - -# -# D-channel protocol features -# -CONFIG_HISAX_EURO=y -CONFIG_DE_AOC=y -# CONFIG_HISAX_NO_SENDCOMPLETE is not set -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -CONFIG_HISAX_1TR6=y -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 - -# -# HiSax supported cards -# -CONFIG_HISAX_16_3=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_SX=y -# CONFIG_HISAX_DEBUG is not set - -# -# HiSax PCMCIA card service modules -# -CONFIG_HISAX_SEDLBAUER_CS=m -CONFIG_HISAX_ELSA_CS=m -CONFIG_HISAX_AVM_A1_CS=m -CONFIG_HISAX_TELES_CS=m - -# -# HiSax sub driver modules -# -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_HFCUSB=m -# CONFIG_HISAX_HFC4S8S is not set -CONFIG_HISAX_HDLC=y - -# -# Active cards -# - -# -# Siemens Gigaset -# -# CONFIG_ISDN_DRV_GIGASET is not set - -# -# CAPI subsystem -# -CONFIG_ISDN_CAPI=m -CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y -CONFIG_ISDN_CAPI_MIDDLEWARE=y -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIFS_BOOL=y -CONFIG_ISDN_CAPI_CAPIFS=m -CONFIG_ISDN_CAPI_CAPIDRV=m - -# -# CAPI hardware drivers -# - -# -# Active AVM cards -# -CONFIG_CAPI_AVM=y -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -CONFIG_ISDN_DRV_AVMB1_AVM_CS=m - -# -# Active Eicon DIVA Server cards -# -CONFIG_CAPI_EICON=y +# CONFIG_ISDN is not set # # Input device support @@ -1108,10 +760,7 @@ CONFIG_INPUT=y # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_TSDEV=m CONFIG_INPUT_TSDEV_SCREEN_X=240 @@ -1153,11 +802,9 @@ CONFIG_JOYSTICK_SPACEORB=m CONFIG_JOYSTICK_SPACEBALL=m CONFIG_JOYSTICK_STINGER=m # CONFIG_JOYSTICK_TWIDJOY is not set -CONFIG_JOYSTICK_DB9=m -CONFIG_JOYSTICK_GAMECON=m -CONFIG_JOYSTICK_TURBOGRAFX=m CONFIG_JOYSTICK_JOYDUMP=m CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set CONFIG_TOUCHSCREEN_GUNZE=m # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set @@ -1170,7 +817,6 @@ CONFIG_INPUT_UINPUT=m # CONFIG_SERIO=y CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_PARKBD=m CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m CONFIG_GAMEPORT=m @@ -1183,32 +829,14 @@ CONFIG_GAMEPORT_L4=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_COMPUTONE=m -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -# CONFIG_CYZ_INTR is not set -CONFIG_DIGIEPCA=m -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -# CONFIG_ISI is not set -CONFIG_SYNCLINKMP=m -CONFIG_N_HDLC=m -# CONFIG_RISCOM8 is not set -# CONFIG_SPECIALIX is not set -CONFIG_SX=m -CONFIG_RIO=m -CONFIG_RIO_OLDPCI=y -CONFIG_STALDRV=y -CONFIG_STALLION=m -CONFIG_ISTALLION=m +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y @@ -1225,20 +853,11 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -CONFIG_PPDEV=m -CONFIG_TIPAR=m # # IPMI # -CONFIG_IPMI_HANDLER=m -# CONFIG_IPMI_PANIC_EVENT is not set -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -CONFIG_IPMI_WATCHDOG=m -CONFIG_IPMI_POWEROFF=m +# CONFIG_IPMI_HANDLER is not set # # Watchdog Cards @@ -1255,22 +874,15 @@ CONFIG_SOFT_WATCHDOG=m # USB-based Watchdog Cards # CONFIG_USBPCWATCHDOG=m -CONFIG_NVRAM=m -CONFIG_DTLK=m -CONFIG_R3964=m +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set # # Ftape, the floppy tape device driver # - -# -# PCMCIA character devices -# -CONFIG_SYNCLINK_CS=m -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -CONFIG_RAW_DRIVER=m -CONFIG_MAX_RAW_DEVS=256 +# CONFIG_RAW_DRIVER is not set # # TPM devices @@ -1281,8 +893,8 @@ CONFIG_MAX_RAW_DEVS=256 # # I2C support # -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y # # I2C Algorithms @@ -1294,11 +906,10 @@ CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # -CONFIG_I2C_ISA=m -CONFIG_I2C_PARPORT=m -CONFIG_I2C_PARPORT_LIGHT=m -CONFIG_I2C_STUB=m -CONFIG_I2C_PCA_ISA=m +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -1318,66 +929,28 @@ CONFIG_SENSORS_PCF8591=m # # SPI support # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y # -# Dallas's 1-wire bus +# SPI Master Controller Drivers # -CONFIG_W1=m +CONFIG_SPI_BITBANG=y # -# 1-wire Bus Masters +# SPI Protocol Masters # -# CONFIG_W1_MASTER_DS9490 is not set -# CONFIG_W1_MASTER_DS2482 is not set # -# 1-wire Slaves +# Dallas's 1-wire bus # -# CONFIG_W1_SLAVE_THERM is not set -# CONFIG_W1_SLAVE_SMEM is not set -# CONFIG_W1_SLAVE_DS2433 is not set # # Hardware Monitoring support # -CONFIG_HWMON=y -CONFIG_HWMON_VID=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1031=m -# CONFIG_SENSORS_ADM9240 is not set -CONFIG_SENSORS_ASB100=m -# CONFIG_SENSORS_ATXP1 is not set -CONFIG_SENSORS_DS1621=m -# CONFIG_SENSORS_F71805F is not set -CONFIG_SENSORS_FSCHER=m -# CONFIG_SENSORS_FSCPOS is not set -CONFIG_SENSORS_GL518SM=m -# CONFIG_SENSORS_GL520SM is not set -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -# CONFIG_SENSORS_LM92 is not set -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_PC87360=m -CONFIG_SENSORS_SMSC47M1=m -# CONFIG_SENSORS_SMSC47B397 is not set -CONFIG_SENSORS_W83781D=m -# CONFIG_SENSORS_W83792D is not set -CONFIG_SENSORS_W83L785TS=m -CONFIG_SENSORS_W83627HF=m -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Misc devices @@ -1389,9 +962,18 @@ CONFIG_SENSORS_W83627HF=m # CONFIG_NEW_LEDS is not set # +# LED drivers +# + +# +# LED Triggers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -1460,18 +1042,25 @@ CONFIG_DVB_TDA10021=m CONFIG_DVB_STV0297=m # -# ATSC (North American/Korean Terresterial DTV) frontends +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends # # CONFIG_DVB_NXT200X is not set # CONFIG_DVB_OR51211 is not set # CONFIG_DVB_OR51132 is not set # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set + +# +# Miscellaneous devices +# +CONFIG_DVB_LNBP21=m +# CONFIG_DVB_ISL6421 is not set # CONFIG_USB_DABUSB is not set # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # @@ -1479,6 +1068,7 @@ CONFIG_DVB_STV0297=m # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -1526,17 +1116,12 @@ CONFIG_SND_MPU401=m CONFIG_SND_USB_AUDIO=m # -# PCMCIA devices -# - -# # Open Sound System # CONFIG_SOUND_PRIME=m -# CONFIG_OBSOLETE_OSS_DRIVER is not set +# CONFIG_OSS_OBSOLETE_DRIVER is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set -CONFIG_SOUND_TVMIXER=m # # USB support @@ -1544,7 +1129,7 @@ CONFIG_SOUND_TVMIXER=m CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=m +CONFIG_USB=y # CONFIG_USB_DEBUG is not set # @@ -1561,7 +1146,6 @@ CONFIG_USB_BANDWIDTH=y # # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_SL811_HCD=m -# CONFIG_USB_SL811_CS is not set # # USB Device Class drivers @@ -1580,7 +1164,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y @@ -1608,9 +1191,7 @@ CONFIG_USB_WACOM=m # CONFIG_USB_ACECAD is not set CONFIG_USB_KBTAB=m CONFIG_USB_POWERMATE=m -CONFIG_USB_MTOUCH=m -# CONFIG_USB_ITMTOUCH is not set -CONFIG_USB_EGALAX=m +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set CONFIG_USB_XPAD=m CONFIG_USB_ATI_REMOTE=m @@ -1640,13 +1221,11 @@ CONFIG_USB_NET_NET1080=m # CONFIG_USB_NET_RNDIS_HOST is not set # CONFIG_USB_NET_CDC_SUBSET is not set CONFIG_USB_NET_ZAURUS=m -# CONFIG_USB_ZD1201 is not set CONFIG_USB_MON=y # # USB port drivers # -CONFIG_USB_USS720=m # # USB Serial Converter support @@ -1654,7 +1233,7 @@ CONFIG_USB_USS720=m CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_ARK3116 is not set CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m @@ -1662,6 +1241,7 @@ CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m @@ -1691,9 +1271,11 @@ CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m # CONFIG_USB_SERIAL_SAFE_PADDED is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_TI is not set CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EZUSB=y @@ -1707,10 +1289,12 @@ CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set CONFIG_USB_CYTHERM=m CONFIG_USB_PHIDGETKIT=m CONFIG_USB_PHIDGETSERVO=m # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set CONFIG_USB_TEST=m @@ -1787,7 +1371,6 @@ CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_STATISTICS=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y @@ -1796,6 +1379,7 @@ CONFIG_XFS_RT=y CONFIG_MINIX_FS=m CONFIG_ROMFS_FS=m CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QFMT_V1=m CONFIG_QFMT_V2=m @@ -1856,6 +1440,7 @@ CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -1866,11 +1451,13 @@ CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set # # Network File Systems # -CONFIG_NFS_FS=m +CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y @@ -1880,19 +1467,22 @@ CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y @@ -1940,7 +1530,7 @@ CONFIG_SUN_PARTITION=y # # Native Language Support # -CONFIG_NLS=y +CONFIG_NLS=m CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m @@ -1984,26 +1574,29 @@ CONFIG_NLS_UTF8=m # # Profiling support # -CONFIG_PROFILING=y -CONFIG_OPROFILE=m +# CONFIG_PROFILING is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y @@ -2013,8 +1606,7 @@ CONFIG_FORCED_INLINING=y # CONFIG_DEBUG_USER is not set # CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_LL is not set # # Security options @@ -2039,7 +1631,7 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_SERPENT=m @@ -2068,5 +1660,6 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_REED_SOLOMON=m -CONFIG_REED_SOLOMON_DEC16=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_PLIST=y diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index b4171dd..bbd138b 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -81,9 +81,17 @@ config SMDK2440_CPU2442 depends on ARCH_S3C2440 select CPU_S3C2442 +config MACH_S3C2413 + bool + help + Internal node for S3C2413 verison of SMDK2413, so that + machine_is_s3c2413() will work when MACH_SMDK2413 is + selected + config MACH_SMDK2413 bool "SMDK2413" select CPU_S3C2412 + select MACH_S3C2413 select MACH_SMDK help Say Y here if you are using an SMDK2413 diff --git a/arch/arm/mach-s3c2410/irq.h b/arch/arm/mach-s3c2410/irq.h index f7cc4c9..842a9f4 100644 --- a/arch/arm/mach-s3c2410/irq.h +++ b/arch/arm/mach-s3c2410/irq.h @@ -100,5 +100,10 @@ s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group) /* exported for use in arch/arm/mach-s3c2410 */ +#ifdef CONFIG_PM extern int s3c_irq_wake(unsigned int irqno, unsigned int state); +#else +#define s3c_irq_wake NULL +#endif + extern int s3c_irqext_type(unsigned int irq, unsigned int type); diff --git a/arch/arm/mach-s3c2410/s3c2412.c b/arch/arm/mach-s3c2410/s3c2412.c index e24ffd5..2d163f7 100644 --- a/arch/arm/mach-s3c2410/s3c2412.c +++ b/arch/arm/mach-s3c2410/s3c2412.c @@ -35,11 +35,15 @@ #include <asm/mach/irq.h> #include <asm/hardware.h> +#include <asm/proc-fns.h> #include <asm/io.h> #include <asm/irq.h> +#include <asm/arch/idle.h> + #include <asm/arch/regs-clock.h> #include <asm/arch/regs-serial.h> +#include <asm/arch/regs-power.h> #include <asm/arch/regs-gpio.h> #include <asm/arch/regs-gpioj.h> #include <asm/arch/regs-dsc.h> @@ -75,6 +79,27 @@ void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no) s3c_device_nand.name = "s3c2412-nand"; } +/* s3c2412_idle + * + * use the standard idle call by ensuring the idle mode + * in power config, then issuing the idle co-processor + * instruction +*/ + +static void s3c2412_idle(void) +{ + unsigned long tmp; + + /* ensure our idle mode is to go to idle */ + + tmp = __raw_readl(S3C2412_PWRCFG); + tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK; + tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE; + __raw_writel(tmp, S3C2412_PWRCFG); + + cpu_do_idle(); +} + /* s3c2412_map_io * * register the standard cpu IO areas, and any passed in from the @@ -87,6 +112,10 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size) s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10; + /* set our idle function */ + + s3c24xx_idle = s3c2412_idle; + /* register our io-tables */ iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc)); diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 561bff7..3ca0c92 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -644,7 +644,7 @@ __80219_proc_info: .type __8032x_proc_info,#object __8032x_proc_info: .long 0x69052420 - .long 0xffffffe0 + .long 0xfffff7e0 .long PMD_TYPE_SECT | \ PMD_SECT_BUFFERABLE | \ PMD_SECT_CACHEABLE | \ diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index 37a7d2e..87f9f60 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -209,6 +209,10 @@ ENTRY(ret_from_fork) GET_THREAD_INFO(%ebp) popl %eax CFI_ADJUST_CFA_OFFSET -4 + pushl $0x0202 # Reset kernel eflags + CFI_ADJUST_CFA_OFFSET 4 + popfl + CFI_ADJUST_CFA_OFFSET -4 jmp syscall_exit CFI_ENDPROC diff --git a/arch/sparc/kernel/sys_sparc.c b/arch/sparc/kernel/sys_sparc.c index 94ff58c..896863f 100644 --- a/arch/sparc/kernel/sys_sparc.c +++ b/arch/sparc/kernel/sys_sparc.c @@ -470,19 +470,21 @@ asmlinkage int sys_getdomainname(char __user *name, int len) { int nlen, err; - if (len < 0 || len > __NEW_UTS_LEN) + if (len < 0) return -EINVAL; down_read(&uts_sem); nlen = strlen(system_utsname.domainname) + 1; - if (nlen < len) - len = nlen; + err = -EINVAL; + if (nlen > len) + goto out; err = -EFAULT; - if (!copy_to_user(name, system_utsname.domainname, len)) + if (!copy_to_user(name, system_utsname.domainname, nlen)) err = 0; +out: up_read(&uts_sem); return err; } diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c index bf5f14e..c608c94 100644 --- a/arch/sparc64/kernel/sys_sparc.c +++ b/arch/sparc64/kernel/sys_sparc.c @@ -707,19 +707,21 @@ asmlinkage long sys_getdomainname(char __user *name, int len) { int nlen, err; - if (len < 0 || len > __NEW_UTS_LEN) + if (len < 0) return -EINVAL; down_read(&uts_sem); nlen = strlen(system_utsname.domainname) + 1; - if (nlen < len) - len = nlen; + err = -EINVAL; + if (nlen > len) + goto out; err = -EFAULT; - if (!copy_to_user(name, system_utsname.domainname, len)) + if (!copy_to_user(name, system_utsname.domainname, nlen)) err = 0; +out: up_read(&uts_sem); return err; } diff --git a/drivers/atm/he.c b/drivers/atm/he.c index d369130..dd96123 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -2282,6 +2282,8 @@ __enqueue_tpd(struct he_dev *he_dev, struct he_tpd *tpd, unsigned cid) TPDRQ_MASK(he_readl(he_dev, TPDRQ_B_H))); if (new_tail == he_dev->tpdrq_head) { + int slot; + hprintk("tpdrq full (cid 0x%x)\n", cid); /* * FIXME @@ -2289,6 +2291,13 @@ __enqueue_tpd(struct he_dev *he_dev, struct he_tpd *tpd, unsigned cid) * after service_tbrq, service the backlog * for now, we just drop the pdu */ + for (slot = 0; slot < TPD_MAXIOV; ++slot) { + if (tpd->iovec[slot].addr) + pci_unmap_single(he_dev->pci_dev, + tpd->iovec[slot].addr, + tpd->iovec[slot].len & TPD_LEN_MASK, + PCI_DMA_TODEVICE); + } if (tpd->skb) { if (tpd->vcc->pop) tpd->vcc->pop(tpd->vcc, tpd->skb); diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c index 293bb2f..2f69876 100644 --- a/drivers/sbus/char/openprom.c +++ b/drivers/sbus/char/openprom.c @@ -145,8 +145,9 @@ static int opromgetprop(void __user *argp, struct device_node *dp, struct openpr void *pval; int len; - pval = of_get_property(dp, op->oprom_array, &len); - if (!pval || len <= 0 || len > bufsize) + if (!dp || + !(pval = of_get_property(dp, op->oprom_array, &len)) || + len <= 0 || len > bufsize) return copyout(argp, op, sizeof(int)); memcpy(op->oprom_array, pval, len); @@ -161,6 +162,8 @@ static int opromnxtprop(void __user *argp, struct device_node *dp, struct openpr struct property *prop; int len; + if (!dp) + return copyout(argp, op, sizeof(int)); if (op->oprom_array[0] == '\0') { prop = dp->properties; if (!prop) @@ -266,9 +269,13 @@ static int oprompci2node(void __user *argp, struct device_node *dp, struct openp static int oprompath2node(void __user *argp, struct device_node *dp, struct openpromio *op, int bufsize, DATA *data) { + phandle ph = 0; + dp = of_find_node_by_path(op->oprom_array); + if (dp) + ph = dp->node; data->current_node = dp; - *((int *)op->oprom_array) = dp->node; + *((int *)op->oprom_array) = ph; op->oprom_size = sizeof(int); return copyout(argp, op, bufsize + sizeof(int)); diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index 392bffc..95738a1 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -1621,7 +1621,7 @@ static struct s3c24xx_uart_info s3c2412_uart_inf = { static int s3c2412_serial_probe(struct platform_device *dev) { dbg("s3c2440_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c2440_uart_inf); + return s3c24xx_serial_probe(dev, &s3c2412_uart_inf); } static struct platform_driver s3c2412_serial_drv = { diff --git a/include/asm-arm/arch-s3c2410/regs-power.h b/include/asm-arm/arch-s3c2410/regs-power.h new file mode 100644 index 0000000..6c319ea --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-power.h @@ -0,0 +1,34 @@ +/* linux/include/asm/arch-s3c2410/regs-power.h + * + * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C24XX power control register definitions +*/ + +#ifndef __ASM_ARM_REGS_PWR +#define __ASM_ARM_REGS_PWR __FILE__ + +#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR) + +#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20) +#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24) + +#define S3C2412_PWRCFG_BATF_IGNORE (0<<0) +#define S3C2412_PWRCFG_BATF_SLEEP (3<<0) +#define S3C2412_PWRCFG_BATF_MASK (3<<0) + +#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0<<6) +#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1<<6) +#define S3C2412_PWRCFG_STANDBYWFI_STOP (2<<6) +#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3<<6) +#define S3C2412_PWRCFG_STANDBYWFI_MASK (3<<6) + +#define S3C2412_PWRCFG_RTC_MASKIRQ (1<<8) +#define S3C2412_PWRCFG_NAND_NORST (1<<9) + +#endif /* __ASM_ARM_REGS_PWR */ diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h index 71061ca..ae7baa6 100644 --- a/include/asm-arm/elf.h +++ b/include/asm-arm/elf.h @@ -8,7 +8,9 @@ #include <asm/ptrace.h> #include <asm/user.h> +#ifdef __KERNEL #include <asm/procinfo.h> +#endif typedef unsigned long elf_greg_t; typedef unsigned long elf_freg_t[3]; diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h index 63d12f0..b721270 100644 --- a/include/asm-arm/page.h +++ b/include/asm-arm/page.h @@ -193,8 +193,8 @@ extern pmd_t *top_pmd; #define ARCH_SLAB_MINALIGN 8 #endif -#endif /* __KERNEL__ */ - #include <asm-generic/page.h> +#endif /* __KERNEL__ */ + #endif diff --git a/include/asm-i386/system.h b/include/asm-i386/system.h index 49928eb..098bcee 100644 --- a/include/asm-i386/system.h +++ b/include/asm-i386/system.h @@ -11,9 +11,14 @@ struct task_struct; /* one of the stranger aspects of C forward declarations.. */ extern struct task_struct * FASTCALL(__switch_to(struct task_struct *prev, struct task_struct *next)); +/* + * Saving eflags is important. It switches not only IOPL between tasks, + * it also protects other tasks from NT leaking through sysenter etc. + */ #define switch_to(prev,next,last) do { \ unsigned long esi,edi; \ - asm volatile("pushl %%ebp\n\t" \ + asm volatile("pushfl\n\t" /* Save flags */ \ + "pushl %%ebp\n\t" \ "movl %%esp,%0\n\t" /* save ESP */ \ "movl %5,%%esp\n\t" /* restore ESP */ \ "movl $1f,%1\n\t" /* save EIP */ \ @@ -21,6 +26,7 @@ extern struct task_struct * FASTCALL(__switch_to(struct task_struct *prev, struc "jmp __switch_to\n" \ "1:\t" \ "popl %%ebp\n\t" \ + "popfl" \ :"=m" (prev->thread.esp),"=m" (prev->thread.eip), \ "=a" (last),"=S" (esi),"=D" (edi) \ :"m" (next->thread.esp),"m" (next->thread.eip), \ diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild index d06311a..1d3a14e 100644 --- a/include/linux/netfilter/Kbuild +++ b/include/linux/netfilter/Kbuild @@ -5,7 +5,7 @@ header-y := nf_conntrack_sctp.h nf_conntrack_tuple_common.h \ xt_helper.h xt_length.h xt_limit.h xt_mac.h xt_mark.h \ xt_MARK.h xt_multiport.h xt_NFQUEUE.h xt_pkttype.h \ xt_policy.h xt_realm.h xt_sctp.h xt_state.h xt_string.h \ - xt_tcpmss.h xt_tcpudp.h + xt_tcpmss.h xt_tcpudp.h xt_SECMARK.h xt_CONNSECMARK.h unifdef-y := nf_conntrack_common.h nf_conntrack_ftp.h \ nf_conntrack_tcp.h nfnetlink.h x_tables.h xt_physdev.h diff --git a/net/Kconfig b/net/Kconfig index c6cec5a..4959a4e 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -177,7 +177,7 @@ source "net/lapb/Kconfig" config NET_DIVERT bool "Frame Diverter (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on EXPERIMENTAL && BROKEN ---help--- The Frame Diverter allows you to divert packets from the network, that are not aimed at the interface receiving it (in diff --git a/net/atm/clip.c b/net/atm/clip.c index 7ce7bfe..7af2c41 100644 --- a/net/atm/clip.c +++ b/net/atm/clip.c @@ -500,9 +500,11 @@ static int clip_mkip(struct atm_vcc *vcc, int timeout) } else { unsigned int len = skb->len; + skb_get(skb); clip_push(vcc, skb); PRIV(skb->dev)->stats.rx_packets--; PRIV(skb->dev)->stats.rx_bytes -= len; + kfree_skb(skb); } return 0; } diff --git a/net/bridge/br_stp_bpdu.c b/net/bridge/br_stp_bpdu.c index a7ba0cc..068d8af 100644 --- a/net/bridge/br_stp_bpdu.c +++ b/net/bridge/br_stp_bpdu.c @@ -121,7 +121,7 @@ void br_send_tcn_bpdu(struct net_bridge_port *p) buf[1] = 0; buf[2] = 0; buf[3] = BPDU_TYPE_TCN; - br_send_bpdu(p, buf, 7); + br_send_bpdu(p, buf, 4); } /* diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 5130d2e..fe2113f 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -1432,6 +1432,9 @@ int neigh_table_clear(struct neigh_table *tbl) kfree(tbl->phash_buckets); tbl->phash_buckets = NULL; + free_percpu(tbl->stats); + tbl->stats = NULL; + return 0; } diff --git a/net/ipv4/ipvs/ip_vs_ftp.c b/net/ipv4/ipvs/ip_vs_ftp.c index a19a33c..37fafb1 100644 --- a/net/ipv4/ipvs/ip_vs_ftp.c +++ b/net/ipv4/ipvs/ip_vs_ftp.c @@ -46,14 +46,7 @@ */ static int ports[IP_VS_APP_MAX_PORTS] = {21, 0}; module_param_array(ports, int, NULL, 0); - -/* - * Debug level - */ -#ifdef CONFIG_IP_VS_DEBUG -static int debug=0; -module_param(debug, int, 0); -#endif +MODULE_PARM_DESC(ports, "Ports to monitor for FTP control commands"); /* Dummy variable */ @@ -177,7 +170,7 @@ static int ip_vs_ftp_out(struct ip_vs_app *app, struct ip_vs_conn *cp, &start, &end) != 1) return 1; - IP_VS_DBG(1-debug, "PASV response (%u.%u.%u.%u:%d) -> " + IP_VS_DBG(7, "PASV response (%u.%u.%u.%u:%d) -> " "%u.%u.%u.%u:%d detected\n", NIPQUAD(from), ntohs(port), NIPQUAD(cp->caddr), 0); @@ -280,7 +273,7 @@ static int ip_vs_ftp_in(struct ip_vs_app *app, struct ip_vs_conn *cp, while (data <= data_limit - 6) { if (strnicmp(data, "PASV\r\n", 6) == 0) { /* Passive mode on */ - IP_VS_DBG(1-debug, "got PASV at %zd of %zd\n", + IP_VS_DBG(7, "got PASV at %zd of %zd\n", data - data_start, data_limit - data_start); cp->app_data = &ip_vs_ftp_pasv; @@ -302,7 +295,7 @@ static int ip_vs_ftp_in(struct ip_vs_app *app, struct ip_vs_conn *cp, &start, &end) != 1) return 1; - IP_VS_DBG(1-debug, "PORT %u.%u.%u.%u:%d detected\n", + IP_VS_DBG(7, "PORT %u.%u.%u.%u:%d detected\n", NIPQUAD(to), ntohs(port)); /* Passive mode off */ @@ -311,7 +304,7 @@ static int ip_vs_ftp_in(struct ip_vs_app *app, struct ip_vs_conn *cp, /* * Now update or create a connection entry for it */ - IP_VS_DBG(1-debug, "protocol %s %u.%u.%u.%u:%d %u.%u.%u.%u:%d\n", + IP_VS_DBG(7, "protocol %s %u.%u.%u.%u:%d %u.%u.%u.%u:%d\n", ip_vs_proto_name(iph->protocol), NIPQUAD(to), ntohs(port), NIPQUAD(cp->vaddr), 0); @@ -372,11 +365,17 @@ static int __init ip_vs_ftp_init(void) for (i=0; i<IP_VS_APP_MAX_PORTS; i++) { if (!ports[i]) continue; + if (ports[i] < 0 || ports[i] > 0xffff) { + IP_VS_WARNING("ip_vs_ftp: Ignoring invalid " + "configuration port[%d] = %d\n", + i, ports[i]); + continue; + } ret = register_ip_vs_app_inc(app, app->protocol, ports[i]); if (ret) break; - IP_VS_DBG(1-debug, "%s: loaded support on port[%d] = %d\n", - app->name, i, ports[i]); + IP_VS_INFO("%s: loaded support on port[%d] = %d\n", + app->name, i, ports[i]); } if (ret) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 111ff39..159fa3f 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -89,7 +89,7 @@ int sysctl_tcp_frto; int sysctl_tcp_nometrics_save; int sysctl_tcp_moderate_rcvbuf = 1; -int sysctl_tcp_abc = 1; +int sysctl_tcp_abc; #define FLAG_DATA 0x01 /* Incoming frame contained data. */ #define FLAG_WIN_UPDATE 0x02 /* Incoming ACK was a window update. */ diff --git a/net/ipv4/tcp_lp.c b/net/ipv4/tcp_lp.c index 1f977b6..48f28d6 100644 --- a/net/ipv4/tcp_lp.c +++ b/net/ipv4/tcp_lp.c @@ -3,13 +3,8 @@ * * TCP Low Priority is a distributed algorithm whose goal is to utilize only * the excess network bandwidth as compared to the ``fair share`` of - * bandwidth as targeted by TCP. Available from: - * http://www.ece.rice.edu/~akuzma/Doc/akuzma/TCP-LP.pdf + * bandwidth as targeted by TCP. * - * Original Author: - * Aleksandar Kuzmanovic <akuzma@northwestern.edu> - * - * See http://www-ece.rice.edu/networks/TCP-LP/ for their implementation. * As of 2.6.13, Linux supports pluggable congestion control algorithms. * Due to the limitation of the API, we take the following changes from * the original TCP-LP implementation: @@ -24,11 +19,20 @@ * o OWD is handled in relative format, where local time stamp will in * tcp_time_stamp format. * - * Port from 2.4.19 to 2.6.16 as module by: - * Wong Hoi Sing Edison <hswong3i@gmail.com> - * Hung Hing Lun <hlhung3i@gmail.com> + * Original Author: + * Aleksandar Kuzmanovic <akuzma@northwestern.edu> + * Available from: + * http://www.ece.rice.edu/~akuzma/Doc/akuzma/TCP-LP.pdf + * Original implementation for 2.4.19: + * http://www-ece.rice.edu/networks/TCP-LP/ * - * Version: $Id: tcp_lp.c,v 1.22 2006-05-02 18:18:19 hswong3i Exp $ + * 2.6.x module Authors: + * Wong Hoi Sing, Edison <hswong3i@gmail.com> + * Hung Hing Lun, Mike <hlhung3i@gmail.com> + * SourceForge project page: + * http://tcp-lp-mod.sourceforge.net/ + * + * Version: $Id: tcp_lp.c,v 1.24 2006/09/05 20:22:53 hswong3i Exp $ */ #include <linux/config.h> @@ -153,16 +157,19 @@ static u32 tcp_lp_remote_hz_estimator(struct sock *sk) if (m < 0) m = -m; - if (rhz != 0) { + if (rhz > 0) { m -= rhz >> 6; /* m is now error in remote HZ est */ rhz += m; /* 63/64 old + 1/64 new */ } else rhz = m << 6; + out: /* record time for successful remote HZ calc */ - lp->flag |= LP_VALID_RHZ; + if (rhz > 0) + lp->flag |= LP_VALID_RHZ; + else + lp->flag &= ~LP_VALID_RHZ; - out: /* record reference time stamp */ lp->remote_ref_time = tp->rx_opt.rcv_tsval; lp->local_ref_time = tp->rx_opt.rcv_tsecr; @@ -333,6 +340,6 @@ static void __exit tcp_lp_unregister(void) module_init(tcp_lp_register); module_exit(tcp_lp_unregister); -MODULE_AUTHOR("Wong Hoi Sing Edison, Hung Hing Lun"); +MODULE_AUTHOR("Wong Hoi Sing Edison, Hung Hing Lun Mike"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("TCP Low Priority"); diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 99a6eb2..3b55b4c 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -696,7 +696,7 @@ int datagram_send_ctl(struct msghdr *msg, struct flowi *fl, } tc = *(int *)CMSG_DATA(cmsg); - if (tc < 0 || tc > 0xff) + if (tc < -1 || tc > 0xff) goto exit_f; err = 0; diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c index 3d6e9a3..356a8a7 100644 --- a/net/ipv6/icmp.c +++ b/net/ipv6/icmp.c @@ -401,7 +401,7 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info, if (hlimit < 0) hlimit = ipv6_get_hoplimit(dst->dev); - tclass = np->cork.tclass; + tclass = np->tclass; if (tclass < 0) tclass = 0; @@ -497,7 +497,7 @@ static void icmpv6_echo_reply(struct sk_buff *skb) if (hlimit < 0) hlimit = ipv6_get_hoplimit(dst->dev); - tclass = np->cork.tclass; + tclass = np->tclass; if (tclass < 0) tclass = 0; diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 4332726..a5eaaf6 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -362,7 +362,7 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, break; case IPV6_TCLASS: - if (val < 0 || val > 0xff) + if (val < -1 || val > 0xff) goto e_inval; np->tclass = val; retv = 0; @@ -947,6 +947,8 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname, case IPV6_TCLASS: val = np->tclass; + if (val < 0) + val = 0; break; case IPV6_RECVTCLASS: diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index d57e61c..15b862d 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -781,7 +781,7 @@ static int rawv6_sendmsg(struct kiocb *iocb, struct sock *sk, } if (tclass < 0) { - tclass = np->cork.tclass; + tclass = np->tclass; if (tclass < 0) tclass = 0; } diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index f9cef36..4172a52 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -626,8 +626,6 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, struct packe if ((int)snaplen < 0) snaplen = 0; } - if (snaplen > skb->len-skb->data_len) - snaplen = skb->len-skb->data_len; spin_lock(&sk->sk_receive_queue.lock); h = (struct tpacket_hdr *)packet_lookup_frame(po, po->head); @@ -644,7 +642,7 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, struct packe status &= ~TP_STATUS_LOSING; spin_unlock(&sk->sk_receive_queue.lock); - memcpy((u8*)h + macoff, skb->data, snaplen); + skb_copy_bits(skb, 0, (u8*)h + macoff, snaplen); h->tp_len = skb->len; h->tp_snaplen = snaplen; diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 0834c2e..6f91518 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -238,9 +238,7 @@ void __netdev_watchdog_up(struct net_device *dev) static void dev_watchdog_up(struct net_device *dev) { - netif_tx_lock_bh(dev); __netdev_watchdog_up(dev); - netif_tx_unlock_bh(dev); } static void dev_watchdog_down(struct net_device *dev) |
