diff options
| -rw-r--r-- | drivers/staging/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/staging/Makefile | 1 | ||||
| -rw-r--r-- | drivers/staging/altpciechdma/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/staging/altpciechdma/Makefile | 2 | ||||
| -rw-r--r-- | drivers/staging/altpciechdma/TODO | 15 | ||||
| -rw-r--r-- | drivers/staging/altpciechdma/altpciechdma.c | 1182 |
6 files changed, 0 insertions, 1212 deletions
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index e43cab4..9543174 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -71,8 +71,6 @@ source "drivers/staging/asus_oled/Kconfig" source "drivers/staging/panel/Kconfig" -source "drivers/staging/altpciechdma/Kconfig" - source "drivers/staging/rtl8187se/Kconfig" source "drivers/staging/rtl8192su/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index c2f0ca9..394327a 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_RT2870) += rt2870/ obj-$(CONFIG_COMEDI) += comedi/ obj-$(CONFIG_ASUS_OLED) += asus_oled/ obj-$(CONFIG_PANEL) += panel/ -obj-$(CONFIG_ALTERA_PCIE_CHDMA) += altpciechdma/ obj-$(CONFIG_R8187SE) += rtl8187se/ obj-$(CONFIG_RTL8192SU) += rtl8192su/ obj-$(CONFIG_RTL8192U) += rtl8192u/ diff --git a/drivers/staging/altpciechdma/Kconfig b/drivers/staging/altpciechdma/Kconfig deleted file mode 100644 index 0f4bf92..0000000 --- a/drivers/staging/altpciechdma/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -config ALTERA_PCIE_CHDMA - tristate "Altera PCI Express Chaining DMA driver" - depends on PCI - default N - ---help--- - A reference driver that exercises the Chaining DMA logic reference - design generated along the Altera FPGA PCI Express soft or hard core, - only if instantiated using the MegaWizard, not the SOPC builder, of - Quartus 8.1. - diff --git a/drivers/staging/altpciechdma/Makefile b/drivers/staging/altpciechdma/Makefile deleted file mode 100644 index c08c843..0000000 --- a/drivers/staging/altpciechdma/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -obj-$(CONFIG_ALTERA_PCIE_CHDMA) += altpciechdma.o - diff --git a/drivers/staging/altpciechdma/TODO b/drivers/staging/altpciechdma/TODO deleted file mode 100644 index 12c945f..0000000 --- a/drivers/staging/altpciechdma/TODO +++ /dev/null @@ -1,15 +0,0 @@ -DONE: - - functionality similar to logic testbench - -TODO: - - checkpatch.pl cleanups. - - keep state of DMA engines. - - keep data structure that keeps state of each transfer. - - interrupt handler should iterate over outstanding descriptor tables. - - complete userspace cdev to read/write using the DMA engines. - - split off the DMA support functions in a module, re-usable by custom - drivers. - -Please coordinate work with, and send patches to -Leon Woestenberg <leon@sidebranch.com> - diff --git a/drivers/staging/altpciechdma/altpciechdma.c b/drivers/staging/altpciechdma/altpciechdma.c deleted file mode 100644 index 2a02f8e..0000000 --- a/drivers/staging/altpciechdma/altpciechdma.c +++ /dev/null @@ -1,1182 +0,0 @@ -/** - * Driver for Altera PCIe core chaining DMA reference design. - * - * Copyright (C) 2008 Leon Woestenberg <leon.woestenberg@axon.tv> - * Copyright (C) 2008 Nickolas Heppermann <heppermannwdt@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - * - * - * Rationale: This driver exercises the chaining DMA read and write engine - * in the reference design. It is meant as a complementary reference - * driver that can be used for testing early designs as well as a basis to - * write your custom driver. - * - * Status: Test results from Leon Woestenberg <leon.woestenberg@axon.tv>: - * - * Sendero Board w/ Cyclone II EP2C35F672C6N, PX1011A PCIe x1 PHY on a - * Dell Precision 370 PC, x86, kernel 2.6.20 from Ubuntu 7.04. - * - * Sendero Board w/ Cyclone II EP2C35F672C6N, PX1011A PCIe x1 PHY on a - * Freescale MPC8313E-RDB board, PowerPC, 2.6.24 w/ Freescale patches. - * - * Driver tests passed with PCIe Compiler 8.1. With PCIe 8.0 the DMA - * loopback test had reproducable compare errors. I assume a change - * in the compiler or reference design, but could not find evidence nor - * documentation on a change or fix in that direction. - * - * The reference design does not have readable locations and thus a - * dummy read, used to flush PCI posted writes, cannot be performed. - * - */ - -#include <linux/kernel.h> -#include <linux/cdev.h> -#include <linux/delay.h> -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/jiffies.h> -#include <linux/module.h> -#include <linux/pci.h> - - -/* by default do not build the character device interface */ -/* XXX It is non-functional yet */ -#ifndef ALTPCIECHDMA_CDEV -# define ALTPCIECHDMA_CDEV 0 -#endif - -/* build the character device interface? */ -#if ALTPCIECHDMA_CDEV -# define MAX_CHDMA_SIZE (8 * 1024 * 1024) -# include "mapper_user_to_sg.h" -#endif - -/** driver name, mimicks Altera naming of the reference design */ -#define DRV_NAME "altpciechdma" -/** number of BARs on the device */ -#define APE_BAR_NUM (6) -/** BAR number where the RCSLAVE memory sits */ -#define APE_BAR_RCSLAVE (0) -/** BAR number where the Descriptor Header sits */ -#define APE_BAR_HEADER (2) - -/** maximum size in bytes of the descriptor table, chdma logic limit */ -#define APE_CHDMA_TABLE_SIZE (4096) -/* single transfer must not exceed 255 table entries. worst case this can be - * achieved by 255 scattered pages, with only a single byte in the head and - * tail pages. 253 * PAGE_SIZE is a safe upper bound for the transfer size. - */ -#define APE_CHDMA_MAX_TRANSFER_LEN (253 * PAGE_SIZE) - -/** - * Specifies those BARs to be mapped and the length of each mapping. - * - * Zero (0) means do not map, otherwise specifies the BAR lengths to be mapped. - * If the actual BAR length is less, this is considered an error; then - * reconfigure your PCIe core. - * - * @see ug_pci_express 8.0, table 7-2 at page 7-13. - */ -static const unsigned long bar_min_len[APE_BAR_NUM] = - { 32768, 0, 256, 0, 32768, 0 }; - -/** - * Descriptor Header, controls the DMA read engine or write engine. - * - * The descriptor header is the main data structure for starting DMA transfers. - * - * It sits in End Point (FPGA) memory BAR[2] for 32-bit or BAR[3:2] for 64-bit. - * It references a descriptor table which exists in Root Complex (PC) memory. - * Writing the rclast field starts the DMA operation, thus all other structures - * and fields must be setup before doing so. - * - * @see ug_pci_express 8.0, tables 7-3, 7-4 and 7-5 at page 7-14. - * @note This header must be written in four 32-bit (PCI DWORD) writes. - */ -struct ape_chdma_header { - /** - * w0 consists of two 16-bit fields: - * lsb u16 number; number of descriptors in ape_chdma_table - * msb u16 control; global control flags - */ - u32 w0; - /* bus address to ape_chdma_table in Root Complex memory */ - u32 bdt_addr_h; - u32 bdt_addr_l; - /** - * w3 consists of two 16-bit fields: - * - lsb u16 rclast; last descriptor number available in Root Complex - * - zero (0) means the first descriptor is ready, - * - one (1) means two descriptors are ready, etc. - * - msb u16 reserved; - * - * @note writing to this memory location starts the DMA operation! - */ - u32 w3; -} __attribute__ ((packed)); - -/** - * Descriptor Entry, describing a (non-scattered) single memory block transfer. - * - * There is one descriptor for each memory block involved in the transfer, a - * block being a contiguous address range on the bus. - * - * Multiple descriptors are chained by means of the ape_chdma_table data - * structure. - * - * @see ug_pci_express 8.0, tables 7-6, 7-7 and 7-8 at page 7-14 and page 7-15. - */ -struct ape_chdma_desc { - /** - * w0 consists of two 16-bit fields: - * number of DWORDS to transfer - * - lsb u16 length; - * global control - * - msb u16 control; - */ - u32 w0; - /* address of memory in the End Point */ - u32 ep_addr; - /* bus address of source or destination memory in the Root Complex */ - u32 rc_addr_h; - u32 rc_addr_l; -} __attribute__ ((packed)); - -/** - * Descriptor Table, an array of descriptors describing a chained transfer. - * - * An array of descriptors, preceded by workspace for the End Point. - * It exists in Root Complex memory. - * - * The End Point can update its last completed descriptor number in the - * eplast field if requested by setting the EPLAST_ENA bit either - * globally in the header's or locally in any descriptor's control field. - * - * @note this structure may not exceed 4096 bytes. This results in a - * maximum of 4096 / (4 * 4) - 1 = 255 descriptors per chained transfer. - * - * @see ug_pci_express 8.0, tables 7-9, 7-10 and 7-11 at page 7-17 and page 7-18. - */ -struct ape_chdma_table { - /* workspace 0x00-0x0b, reserved */ - u32 reserved1[3]; - /* workspace 0x0c-0x0f, last descriptor handled by End Point */ - u32 w3; - /* the actual array of descriptors - * 0x10-0x1f, 0x20-0x2f, ... 0xff0-0xfff (255 entries) - */ - struct ape_chdma_desc desc[255]; -} __attribute__ ((packed)); - -/** - * Altera PCI Express ('ape') board specific book keeping data - * - * Keeps state of the PCIe core and the Chaining DMA controller - * application. - */ -struct ape_dev { - /** the kernel pci device data structure provided by probe() */ - struct pci_dev *pci_dev; - /** - * kernel virtual address of the mapped BAR memory and IO regions of - * the End Point. Used by map_bars()/unmap_bars(). - */ - void * __iomem bar[APE_BAR_NUM]; - /** kernel virtual address for Descriptor Table in Root Complex memory */ - struct ape_chdma_table *table_virt; - /** - * bus address for the Descriptor Table in Root Complex memory, in - * CPU-native endianess - */ - dma_addr_t table_bus; - /* if the device regions could not be allocated, assume and remember it - * is in use by another driver; this driver must not disable the device. - */ - int in_use; - /* whether this driver enabled msi for the device */ - int msi_enabled; - /* whether this driver could obtain the regions */ - int got_regions; - /* irq line successfully requested by this driver, -1 otherwise */ - int irq_line; - /* board revision */ - u8 revision; - /* interrupt count, incremented by the interrupt handler */ - int irq_count; -#if ALTPCIECHDMA_CDEV - /* character device */ - dev_t cdevno; - struct cdev cdev; - /* user space scatter gather mapper */ - struct sg_mapping_t *sgm; -#endif -}; - -/** - * Using the subsystem vendor id and subsystem id, it is possible to - * distinguish between different cards bases around the same - * (third-party) logic core. - * - * Default Altera vendor and device ID's, and some (non-reserved) - * ID's are now used here that are used amongst the testers/developers. - */ -static const struct pci_device_id ids[] = { - { PCI_DEVICE(0x1172, 0xE001), }, - { PCI_DEVICE(0x2071, 0x2071), }, - { 0, } -}; -MODULE_DEVICE_TABLE(pci, ids); - -#if ALTPCIECHDMA_CDEV -/* prototypes for character device */ -static int sg_init(struct ape_dev *ape); -static void sg_exit(struct ape_dev *ape); -#endif - -/** - * altpciechdma_isr() - Interrupt handler - * - */ -static irqreturn_t altpciechdma_isr(int irq, void *dev_id) -{ - struct ape_dev *ape = (struct ape_dev *)dev_id; - if (!ape) - return IRQ_NONE; - ape->irq_count++; - return IRQ_HANDLED; -} - -static int __devinit scan_bars(struct ape_dev *ape, struct pci_dev *dev) -{ - int i; - for (i = 0; i < APE_BAR_NUM; i++) { - unsigned long bar_start = pci_resource_start(dev, i); - if (bar_start) { - unsigned long bar_end = pci_resource_end(dev, i); - unsigned long bar_flags = pci_resource_flags(dev, i); - printk(KERN_DEBUG "BAR%d 0x%08lx-0x%08lx flags 0x%08lx\n", - i, bar_start, bar_end, bar_flags); - } - } - return 0; -} - -/** - * Unmap the BAR regions that had been mapped earlier using map_bars() - */ -static void unmap_bars(struct ape_dev *ape, struct pci_dev *dev) -{ - int i; - for (i = 0; i < APE_BAR_NUM; i++) { - /* is this BAR mapped? */ - if (ape->bar[i]) { - /* unmap BAR */ - pci_iounmap(dev, ape->bar[i]); - ape->bar[i] = NULL; - } - } -} - -/** - * Map the device memory regions into kernel virtual address space after - * verifying their sizes respect the minimum sizes needed, given by the - * bar_min_len[] array. - */ -static int __devinit map_bars(struct ape_dev *ape, struct pci_dev *dev) -{ - int rc; - int i; - /* iterate through all the BARs */ - for (i = 0; i < APE_BAR_NUM; i++) { - unsigned long bar_start = pci_resource_start(dev, i); - unsigned long bar_end = pci_resource_end(dev, i); - unsigned long bar_length = bar_end - bar_start + 1; - ape->bar[i] = NULL; - /* do not map, and skip, BARs with length 0 */ - if (!bar_min_len[i]) - continue; - /* do not map BARs with address 0 */ - if (!bar_start || !bar_end) { - printk(KERN_DEBUG "BAR #%d is not present?!\n", i); - rc = -1; - goto fail; - } - bar_length = bar_end - bar_start + 1; - /* BAR length is less than driver requires? */ - if (bar_length < bar_min_len[i]) { - printk(KERN_DEBUG "BAR #%d length = %lu bytes but driver " - "requires at least %lu bytes\n", - i, bar_length, bar_min_len[i]); - rc = -1; - goto fail; - } - /* map the device memory or IO region into kernel virtual - * address space */ - ape->bar[i] = pci_iomap(dev, i, bar_min_len[i]); - if (!ape->bar[i]) { - printk(KERN_DEBUG "Could not map BAR #%d.\n", i); - rc = -1; - goto fail; - } - printk(KERN_DEBUG "BAR[%d] mapped at 0x%p with length %lu(/%lu).\n", i, - ape->bar[i], bar_min_len[i], bar_length); - } - /* successfully mapped all required BAR regions */ - rc = 0; - goto success; -fail: - /* unmap any BARs that we did map */ - unmap_bars(ape, dev); -success: - return rc; -} - -#if 0 /* not yet implemented fully FIXME add opcode */ -static void __devinit rcslave_test(struct ape_dev *ape, struct pci_dev *dev) -{ - u32 *rcslave_mem = (u32 *)ape->bar[APE_BAR_RCSLAVE]; - u32 result = 0; - /** this number is assumed to be different each time this test runs */ - u32 seed = (u32)jiffies; - u32 value = seed; - int i; - - /* write loop */ - value = seed; - for (i = 1024; i < 32768 / 4 ; i++) { - printk(KERN_DEBUG "Writing 0x%08x to 0x%p.\n", - (u32)value, (void *)rcslave_mem + i); - iowrite32(value, rcslave_mem + i); - value++; - } - /* read-back loop */ - value = seed; - for (i = 1024; i < 32768 / 4; i++) { - result = ioread32(rcslave_mem + i); - if (result != value) { - printk(KERN_DEBUG "Wrote 0x%08x to 0x%p, but read back 0x%08x.\n", - (u32)value, (void *)rcslave_mem + i, (u32)result); - break; - } - value++; - } -} -#endif - -/* obtain the 32 most significant (high) bits of a 32-bit or 64-bit address */ -#define pci_dma_h(addr) ((addr >> 16) >> 16) -/* obtain the 32 least significant (low) bits of a 32-bit or 64-bit address */ -#define pci_dma_l(addr) (addr & 0xffffffffUL) - -/* ape_fill_chdma_desc() - Fill a Altera PCI Express Chaining DMA descriptor - * - * @desc pointer to descriptor to be filled - * @addr root complex address - * @ep_addr end point address - * @len number of bytes, must be a multiple of 4. - */ -static inline void ape_chdma_desc_set(struct ape_chdma_desc *desc, dma_addr_t addr, u32 ep_addr, int len) -{ - BUG_ON(len & 3); - desc->w0 = cpu_to_le32(len / 4); - desc->ep_addr = cpu_to_le32(ep_addr); - desc->rc_addr_h = cpu_to_le32(pci_dma_h(addr)); - desc->rc_addr_l = cpu_to_le32(pci_dma_l(addr)); -} - -#if ALTPCIECHDMA_CDEV -/* - * ape_sg_to_chdma_table() - Create a device descriptor table from a scatterlist. - * - * The scatterlist must have been mapped by pci_map_sg(sgm->sgl). - * - * @sgl scatterlist. - * @nents Number of entries in the scatterlist. - * @first Start index in the scatterlist sgm->sgl. - * @ep_addr End Point address for the scatter/gather transfer. - * @desc pointer to first descriptor - * - * Returns Number of entries in the table on success, -1 on error. - */ -static int ape_sg_to_chdma_table(struct scatterlist *sgl, int nents, int first, struct ape_chdma_desc *desc, u32 ep_addr) -{ - int i = first, j = 0; - /* inspect first entry */ - dma_addr_t addr = sg_dma_address(&sgl[i]); - unsigned int len = sg_dma_len(&sgl[i]); - /* contiguous block */ - dma_addr_t cont_addr = addr; - unsigned int cont_len = len; - /* iterate over remaining entries */ - for (; j < 25 && i < nents - 1; i++) { - /* bus address of next entry i + 1 */ - dma_addr_t next = sg_dma_address(&sgl[i + 1]); - /* length of this entry i */ - len = sg_dma_len(&sgl[i]); - printk(KERN_DEBUG "%04d: addr=0x%Lx length=0x%08x\n", i, - (unsigned long long)addr, len); - /* entry i + 1 is non-contiguous with entry i? */ - if (next != addr + len) { - /* TODO create entry here (we could overwrite i) */ - printk(KERN_DEBUG "%4d: cont_addr=0x%Lx cont_len=0x%08x\n", j, - (unsigned long long)cont_addr, cont_len); - /* set descriptor for contiguous transfer */ - ape_chdma_desc_set(&desc[j], cont_addr, ep_addr, cont_len); - /* next end point memory address */ - ep_addr += cont_len; - /* start new contiguous block */ - cont_addr = next; - cont_len = 0; - j++; - } - /* add entry i + 1 to current contiguous block */ - cont_len += len; - /* goto entry i + 1 */ - addr = next; - } - /* TODO create entry here (we could overwrite i) */ - printk(KERN_DEBUG "%04d: addr=0x%Lx length=0x%08x\n", i, - (unsigned long long)addr, len); - printk(KERN_DEBUG "%4d: cont_addr=0x%Lx length=0x%08x\n", j, - (unsigned long long)cont_addr, cont_len); - j++; - return j; -} -#endif - -/* compare buffers */ -static inline int compare(u32 *p, u32 *q, int len) -{ - int result = -1; - int fail = 0; - int i; - for (i = 0; i < len / 4; i++) { - if (*p == *q) { - /* every so many u32 words, show equals */ - if ((i & 255) == 0) - printk(KERN_DEBUG "[%p] = 0x%08x [%p] = 0x%08x\n", p, *p, q, *q); - } else { - fail++; - /* show the first few miscompares */ - if (fail < 10) - printk(KERN_DEBUG "[%p] = 0x%08x != [%p] = 0x%08x ?!\n", p, *p, q, *q); - /* but stop after a while */ - else if (fail == 10) - printk(KERN_DEBUG "---more errors follow! not printed---\n"); - else - /* stop compare after this many errors */ - break; - } - p++; - q++; - } - if (!fail) - result = 0; - return result; -} - -/* dma_test() - Perform DMA loop back test to end point and back to root complex. - * - * Allocate a cache-coherent buffer in host memory, consisting of four pages. - * - * Fill the four memory pages such that each 32-bit word contains its own address. - * - * Now perform a loop back test, have the end point device copy the first buffer - * half to end point memory, then have it copy back into the second half. - * - * Create a descriptor table to copy the first buffer half into End Point - * memory. Instruct the End Point to do a DMA read using that table. - * - * Create a descriptor table to copy End Point memory to the second buffer - * half. Instruct the End Point to do a DMA write using that table. - * - * Compare results, fail or pass. - * - */ -static int __devinit dma_test(struct ape_dev *ape, struct pci_dev *dev) -{ - /* test result; guilty until proven innocent */ - int result = -1; - /* the DMA read header sits at address 0x00 of the DMA engine BAR */ - struct ape_chdma_header *write_header = (struct ape_chdma_header *)ape->bar[APE_BAR_HEADER]; - /* the write DMA header sits after the read header at address 0x10 */ - struct ape_chdma_header *read_header = write_header + 1; - /* virtual address of the allocated buffer */ - u8 *buffer_virt = 0; - /* bus address of the allocated buffer */ - dma_addr_t buffer_bus = 0; - int i, n = 0, irq_count; - - /* temporary value used to construct 32-bit data words */ - u32 w; - - printk(KERN_DEBUG "bar_tests(), PAGE_SIZE = 0x%0x\n", (int)PAGE_SIZE); - printk(KERN_DEBUG "write_header = 0x%p.\n", write_header); - printk(KERN_DEBUG "read_header = 0x%p.\n", read_header); - printk(KERN_DEBUG "&write_header->w3 = 0x%p\n", &write_header->w3); - printk(KERN_DEBUG "&read_header->w3 = 0x%p\n", &read_header->w3); - printk(KERN_DEBUG "ape->table_virt = 0x%p.\n", ape->table_virt); - - if (!write_header || !read_header || !ape->table_virt) - goto fail; - - /* allocate and map coherently-cached memory for a DMA-able buffer */ - /* @see Documentation/PCI/PCI-DMA-mapping.txt, near line 318 */ - buffer_virt = (u8 *)pci_alloc_consistent(dev, PAGE_SIZE * 4, &buffer_bus); - if (!buffer_virt) { - printk(KERN_DEBUG "Could not allocate coherent DMA buffer.\n"); - goto fail; - } - printk(KERN_DEBUG "Allocated cache-coherent DMA buffer (virtual address = %p, bus address = 0x%016llx).\n", - buffer_virt, (u64)buffer_bus); - - /* fill first half of buffer with its virtual address as data */ - for (i = 0; i < 4 * PAGE_SIZE; i += 4) -#if 0 - *(u32 *)(buffer_virt + i) = i / PAGE_SIZE + 1; -#else - *(u32 *)(buffer_virt + i) = (u32)(unsigned long)(buffer_virt + i); -#endif -#if 0 - compare((u32 *)buffer_virt, (u32 *)(buffer_virt + 2 * PAGE_SIZE), 8192); -#endif - -#if 0 - /* fill second half of buffer with zeroes */ - for (i = 2 * PAGE_SIZE; i < 4 * PAGE_SIZE; i += 4) - *(u32 *)(buffer_virt + i) = 0; -#endif - - /* invalidate EPLAST, outside 0-255, 0xFADE is from the testbench */ - ape->table_virt->w3 = cpu_to_le32(0x0000FADE); - - /* fill in first descriptor */ - n = 0; - /* read 8192 bytes from RC buffer to EP address 4096 */ - ape_chdma_desc_set(&ape->table_virt->desc[n], buffer_bus, 4096, 2 * PAGE_SIZE); -#if 1 - for (i = 0; i < 255; i++) - ape_chdma_desc_set(&ape->table_virt->desc[i], buffer_bus, 4096, 2 * PAGE_SIZE); - /* index of last descriptor */ - n = i - 1; -#endif -#if 0 - /* fill in next descriptor */ - n++; - /* read 1024 bytes from RC buffer to EP address 4096 + 1024 */ - ape_chdma_desc_set(&ape->table_virt->desc[n], buffer_bus + 1024, 4096 + 1024, 1024); -#endif - -#if 1 - /* enable MSI after the last descriptor is completed */ - if (ape->msi_enabled) - ape->table_virt->desc[n].w0 |= cpu_to_le32(1UL << 16)/*local MSI*/; -#endif -#if 0 - /* dump descriptor table for debugging */ - printk(KERN_DEBUG "Descriptor Table (Read, in Root Complex Memory, # = %d)\n", n + 1); - for (i = 0; i < 4 + (n + 1) * 4; i += 4) { - u32 *p = (u32 *)ape->table_virt; - p += i; - printk(KERN_DEBUG "0x%08x/0x%02x: 0x%08x (LEN=0x%x)\n", (u32)p, (u32)p & 15, *p, 4 * le32_to_cpu(*p)); - p++; - printk(KERN_DEBUG "0x%08x/0x%02x: 0x%08x (EPA=0x%x)\n", (u32)p, (u32)p & 15, *p, le32_to_cpu(*p)); - p++; - printk(KERN_DEBUG "0x%08x/0x%02x: 0x%08x (RCH=0x%x)\n", (u32)p, (u32)p & 15, *p, le32_to_cpu(*p)); - p++; - printk(KERN_DEBUG "0x%08x/0x%02x: 0x%08x (RCL=0x%x)\n", (u32)p, (u32)p & 15, *p, le32_to_cpu(*p)); - } -#endif - /* set available number of descriptors in table */ - w = (u32)(n + 1); - w |= (1UL << 18)/*global EPLAST_EN*/; -#if 0 - if (ape->msi_enabled) - w |= (1UL << 17)/*global MSI*/; -#endif - printk(KERN_DEBUG "writing 0x%08x to 0x%p\n", w, (void *)&read_header->w0); - iowrite32(w, &read_header->w0); - - /* write table address (higher 32-bits) */ - printk(KERN_DEBUG "writing 0x%08x to 0x%p\n", (u32)((ape->table_bus >> 16) >> 16), (void *)&read_header->bdt_addr_h); - iowrite32(pci_dma_h(ape->table_bus), &read_header->bdt_addr_h); - - /* write table address (lower 32-bits) */ - printk(KERN_DEBUG "writing 0x%08x to 0x%p\n", (u32)(ape->table_bus & 0xffffffffUL), (void *)&read_header->bdt_addr_l); - iowrite32(pci_dma_l(ape->table_bus), &read_header->bdt_addr_l); - - /* memory write barrier */ - wmb(); - printk(KERN_DEBUG "Flush posted writes\n"); - /** FIXME Add dummy read to flush posted writes but need a readable location! */ -#if 0 - (void)ioread32(); -#endif - - /* remember IRQ count before the transfer */ - irq_count = ape->irq_count; - /* write number of descriptors - this starts the DMA */ - printk(KERN_DEBUG "\nStart DMA read\n"); - printk(KERN_DEBUG "writing 0x%08x to 0x%p\n", (u32)n, (void *)&read_header->w3); - iowrite32(n, &read_header->w3); - printk(KERN_DEBUG "EPLAST = %lu\n", le32_to_cpu(*(u32 *)&ape->table_virt->w3) & 0xffffUL); - - /** memory write barrier */ - wmb(); - /* dummy read to flush posted writes */ - /* FIXME Need a readable location! */ -#if 0 - (void)ioread32(); -#endif - printk(KERN_DEBUG "POLL FOR READ:\n"); - /* poll for chain completion, 1000 times 1 millisecond */ - for (i = 0; i < 100; i++) { - volatile u32 *p = &ape->table_virt->w3; - u32 eplast = le32_to_cpu(*p) & 0xffffUL; - printk(KERN_DEBUG "EPLAST = %u, n = %d\n", eplast, n); - if (eplast == n) { - printk(KERN_DEBUG "DONE\n"); - /* print IRQ count before the transfer */ - printk(KERN_DEBUG "#IRQs during transfer: %d\n", ape->irq_count - irq_count); - break; - } - udelay(100); - } - - /* invalidate EPLAST, outside 0-255, 0xFADE is from the testbench */ - ape->table_virt->w3 = cpu_to_le32(0x0000FADE); - - /* setup first descriptor */ - n = 0; - ape_chdma_desc_set(&ape->table_virt->desc[n], buffer_bus + 8192, 4096, 2 * PAGE_SIZE); -#if 1 - for (i = 0; i < 255; i++) - ape_chdma_desc_set(&ape->table_virt->desc[i], buffer_bus + 8192, 4096, 2 * PAGE_SIZE); - - /* index of last descriptor */ - n = i - 1; -#endif -#if 1 /* test variable, make a module option later */ - if (ape->msi_enabled) - ape->table_virt->desc[n].w0 |= cpu_to_le32(1UL << 16)/*local MSI*/; -#endif -#if 0 - /* dump descriptor table for debugging */ - printk(KERN_DEBUG "Descriptor Table (Write, in Root Complex Memory, # = %d)\n", n + 1); - for (i = 0; i < 4 + (n + 1) * 4; i += 4) { - u32 *p = (u32 *)ape->table_virt; - p += i; - printk(KERN_DEBUG "0x%08x/0x%02x: 0x%08x (LEN=0x%x)\n", (u32)p, (u32)p & 15, *p, 4 * le32_to_cpu(*p)); - p++; - printk(KERN_DEBUG "0x%08x/0x%02x: 0x%08x (EPA=0x%x)\n", (u32)p, (u32)p & 15, *p, le32_to_cpu(*p)); - p++; - printk(KERN_DEBUG "0x%08x/0x%02x: 0x%08x (RCH=0x%x)\n", (u32)p, (u32)p & 15, *p, le32_to_cpu(*p)); - p++; - printk(KERN_DEBUG "0x%08x/0x%02x: 0x%08x (RCL=0x%x)\n", (u32)p, (u32)p & 15, *p, le32_to_cpu(*p)); - } -#endif - - /* set number of available descriptors in the table */ - w = (u32)(n + 1); - /* enable updates of eplast for each descriptor completion */ - w |= (u32)(1UL << 18)/*global EPLAST_EN*/; -#if 0 /* test variable, make a module option later */ - /* enable MSI for each descriptor completion */ - if (ape->msi_enabled) - w |= (1UL << 17)/*global MSI*/; -#endif - iowrite32(w, &write_header->w0); - iowrite32(pci_dma_h(ape->table_bus), &write_header->bdt_addr_h); - iowrite32(pci_dma_l(ape->table_bus), &write_header->bdt_addr_l); - - /** memory write barrier and flush posted writes */ - wmb(); - /* dummy read to flush posted writes */ - /* FIXME Need a readable location! */ -#if 0 - (void)ioread32(); -#endif - irq_count = ape->irq_count; - - printk(KERN_DEBUG "\nStart DMA write\n"); - iowrite32(n, &write_header->w3); - - /** memory write barrier */ - wmb(); - /** dummy read to flush posted writes */ - /* (void) ioread32(); */ - - printk(KERN_DEBUG "POLL FOR WRITE:\n"); - /* poll for completion, 1000 times 1 millisecond */ - for (i = 0; i < 100; i++) { - volatile u32 *p = &ape->table_virt->w3; - u32 eplast = le32_to_cpu(*p) & 0xffffUL; - printk(KERN_DEBUG "EPLAST = %u, n = %d\n", eplast, n); - if (eplast == n) { - printk(KERN_DEBUG "DONE\n"); - /* print IRQ count before the transfer */ - printk(KERN_DEBUG "#IRQs during transfer: %d\n", ape->irq_count - irq_count); - break; - } - udelay(100); - } - /* soft-reset DMA write engine */ - iowrite32(0x0000ffffUL, &write_header->w0); - /* soft-reset DMA read engine */ - iowrite32(0x0000ffffUL, &read_header->w0); - - /** memory write barrier */ - wmb(); - /* dummy read to flush posted writes */ - /* FIXME Need a readable location! */ -#if 0 - (void)ioread32(); -#endif - /* compare first half of buffer with second half, should be identical */ - result = compare((u32 *)buffer_virt, (u32 *)(buffer_virt + 2 * PAGE_SIZE), 8192); - printk(KERN_DEBUG "DMA loop back test %s.\n", result ? "FAILED" : "PASSED"); - - pci_free_consistent(dev, 4 * PAGE_SIZE, buffer_virt, buffer_bus); -fail: - printk(KERN_DEBUG "bar_tests() end, result %d\n", result); - return result; -} - -/* Called when the PCI sub system thinks we can control the given device. - * Inspect if we can support the device and if so take control of it. - * - * Return 0 when we have taken control of the given device. - * - * - allocate board specific bookkeeping - * - allocate coherently-mapped memory for the descriptor table - * - enable the board - * - verify board revision - * - request regions - * - query DMA mask - * - obtain and request irq - * - map regions into kernel address space - */ -static int __devinit probe(struct pci_dev *dev, const struct pci_device_id *id) -{ - int rc = 0; - struct ape_dev *ape = NULL; - u8 irq_pin, irq_line; - printk(KERN_DEBUG "probe(dev = 0x%p, pciid = 0x%p)\n", dev, id); - - /* allocate memory for per-board book keeping */ - ape = kzalloc(sizeof(struct ape_dev), GFP_KERNEL); - if (!ape) { - printk(KERN_DEBUG "Could not kzalloc()ate memory.\n"); - goto err_ape; - } - ape->pci_dev = dev; - dev_set_drvdata(&dev->dev, ape); - printk(KERN_DEBUG "probe() ape = 0x%p\n", ape); - - printk(KERN_DEBUG "sizeof(struct ape_chdma_table) = %d.\n", - (int)sizeof(struct ape_chdma_table)); - /* the reference design has a size restriction on the table size */ - BUG_ON(sizeof(struct ape_chdma_table) > APE_CHDMA_TABLE_SIZE); - - /* allocate and map coherently-cached memory for a descriptor table */ - /* @see LDD3 page 446 */ - ape->table_virt = (struct ape_chdma_table *)pci_alloc_consistent(dev, - APE_CHDMA_TABLE_SIZE, &ape->table_bus); - /* could not allocate table? */ - if (!ape->table_virt) { - printk(KERN_DEBUG "Could not dma_alloc()ate_coherent memory.\n"); - goto err_table; - } - - printk(KERN_DEBUG "table_virt = %p, table_bus = 0x%16llx.\n", - ape->table_virt, (u64)ape->table_bus); - - /* enable device */ - rc = pci_enable_device(dev); - if (rc) { - printk(KERN_DEBUG "pci_enable_device() failed\n"); - goto err_enable; - } - - /* enable bus master capability on device */ - pci_set_master(dev); - /* enable message signaled interrupts */ - rc = pci_enable_msi(dev); - /* could not use MSI? */ - if (rc) { - /* resort to legacy interrupts */ - printk(KERN_DEBUG "Could not enable MSI interrupting.\n"); - ape->msi_enabled = 0; - /* MSI enabled, remember for cleanup */ - } else { - printk(KERN_DEBUG "Enabled MSI interrupting.\n"); - ape->msi_enabled = 1; - } - - pci_read_config_byte(dev, PCI_REVISION_ID, &ape->revision); -#if 0 /* example */ - /* (for example) this driver does not support revision 0x42 */ - if (ape->revision == 0x42) { - printk(KERN_DEBUG "Revision 0x42 is not supported by this driver.\n"); - rc = -ENODEV; - goto err_rev; - } -#endif - /** XXX check for native or legacy PCIe endpoint? */ - - rc = pci_request_regions(dev, DRV_NAME); - /* could not request all regions? */ - if (rc) { - /* assume device is in use (and do not disable it later!) */ - ape->in_use = 1; - goto err_regions; - } - ape->got_regions = 1; - -#if 1 /* @todo For now, disable 64-bit, because I do not understand the implications (DAC!) */ - /* query for DMA transfer */ - /* @see Documentation/PCI/PCI-DMA-mapping.txt */ - if (!pci_set_dma_mask(dev, DMA_BIT_MASK(64))) { - pci_set_consistent_dma_mask(dev, DMA_BIT_MASK(64)); - /* use 64-bit DMA */ - printk(KERN_DEBUG "Using a 64-bit DMA mask.\n"); - } else -#endif - if (!pci_set_dma_mask(dev, DMA_BIT_MASK(32))) { - printk(KERN_DEBUG "Could not set 64-bit DMA mask.\n"); - pci_set_consistent_dma_mask(dev, DMA_BIT_MASK(32)); - /* use 32-bit DMA */ - printk(KERN_DEBUG "Using a 32-bit DMA mask.\n"); - } else { - printk(KERN_DEBUG "No suitable DMA possible.\n"); - /** @todo Choose proper error return code */ - rc = -1; - goto err_mask; - } - - rc = pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq_pin); - /* could not read? */ - if (rc) - goto err_irq; - printk(KERN_DEBUG "IRQ pin #%d (0=none, 1=INTA#...4=INTD#).\n", irq_pin); - - /* @see LDD3, page 318 */ - rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq_line); - /* could not read? */ - if (rc) { - printk(KERN_DEBUG "Could not query PCI_INTERRUPT_LINE, error %d\n", rc); - goto err_irq; - } - printk(KERN_DEBUG "IRQ line #%d.\n", irq_line); -#if 1 - irq_line = dev->irq; - /* @see LDD3, page 259 */ - rc = request_irq(irq_line, altpciechdma_isr, IRQF_SHARED, DRV_NAME, (void *)ape); - if (rc) { - printk(KERN_DEBUG "Could not request IRQ #%d, error %d\n", irq_line, rc); - ape->irq_line = -1; - goto err_irq; - } - /* remember which irq we allocated */ - ape->irq_line = (int)irq_line; - printk(KERN_DEBUG "Successfully requested IRQ #%d with dev_id 0x%p\n", irq_line, ape); -#endif - /* show BARs */ - scan_bars(ape, dev); - /* map BARs */ - rc = map_bars(ape, dev); - if (rc) - goto err_map; -#if ALTPCIECHDMA_CDEV - /* initialize character device */ - rc = sg_init(ape); - if (rc) - goto err_cdev; -#endif - /* perform DMA engines loop back test */ - rc = dma_test(ape, dev); - (void)rc; - /* successfully took the device */ - rc = 0; - printk(KERN_DEBUG "probe() successful.\n"); - goto end; -#if ALTPCIECHDMA_CDEV -err_cdev: - /* unmap the BARs */ - unmap_bars(ape, dev); -#endif -err_map: - /* free allocated irq */ - if (ape->irq_line >= 0) - free_irq(ape->irq_line, (void *)ape); -err_irq: - if (ape->msi_enabled) - pci_disable_msi(dev); - /* disable the device iff it is not in use */ - if (!ape->in_use) - pci_disable_device(dev); - if (ape->got_regions) - pci_release_regions(dev); -err_mask: -err_regions: -/*err_rev:*/ -/* clean up everything before device enable() */ -err_enable: - if (ape->table_virt) - pci_free_consistent(dev, APE_CHDMA_TABLE_SIZE, ape->table_virt, ape->table_bus); -/* clean up everything before allocating descriptor table */ -err_table: - if (ape) - kfree(ape); -err_ape: -end: - return rc; -} - -static void __devexit remove(struct pci_dev *dev) -{ - struct ape_dev *ape = dev_get_drvdata(&dev->dev); - - printk(KERN_DEBUG "remove(0x%p)\n", dev); - printk(KERN_DEBUG "remove(dev = 0x%p) where ape = 0x%p\n", dev, ape); - - /* remove character device */ -#if ALTPCIECHDMA_CDEV - sg_exit(ape); -#endif - - if (ape->table_virt) - pci_free_consistent(dev, APE_CHDMA_TABLE_SIZE, ape->table_virt, ape->table_bus); - - /* free IRQ - * @see LDD3 page 279 - */ - if (ape->irq_line >= 0) { - printk(KERN_DEBUG "Freeing IRQ #%d for dev_id 0x%08lx.\n", - ape->irq_line, (unsigned long)ape); - free_irq(ape->irq_line, (void *)ape); - } - /* MSI was enabled? */ - if (ape->msi_enabled) { - /* Disable MSI @see Documentation/MSI-HOWTO.txt */ - pci_disable_msi(dev); - ape->msi_enabled = 0; - } - /* unmap the BARs */ - unmap_bars(ape, dev); - if (!ape->in_use) - pci_disable_device(dev); - if (ape->got_regions) - /* to be called after device disable */ - pci_release_regions(dev); -} - -#if ALTPCIECHDMA_CDEV - -/* - * Called when the device goes from unused to used. - */ -static int sg_open(struct inode *inode, struct file *file) -{ - struct ape_dev *ape; - printk(KERN_DEBUG DRV_NAME "_open()\n"); - /* pointer to containing data structure of the character device inode */ - ape = container_of(inode->i_cdev, struct ape_dev, cdev); - /* create a reference to our device state in the opened file */ - file->private_data = ape; - /* create virtual memory mapper */ - ape->sgm = sg_create_mapper(MAX_CHDMA_SIZE); - return 0; -} - -/* - * Called when the device goes from used to unused. - */ -static int sg_close(struct inode *inode, struct file *file) -{ - /* fetch device specific data stored earlier during open */ - struct ape_dev *ape = (struct ape_dev *)file->private_data; - printk(KERN_DEBUG DRV_NAME "_close()\n"); - /* destroy virtual memory mapper */ - sg_destroy_mapper(ape->sgm); - return 0; -} - -static ssize_t sg_read(struct file *file, char __user *buf, size_t count, loff_t *pos) -{ - /* fetch device specific data stored earlier during open */ - struct ape_dev *ape = (struct ape_dev *)file->private_data; - (void)ape; - printk(KERN_DEBUG DRV_NAME "_read(buf=0x%p, count=%lld, pos=%llu)\n", buf, (s64)count, (u64)*pos); - return count; -} - -/* sg_write() - Write to the device - * - * @buf userspace buffer - * @count number of bytes in the userspace buffer - * - * Iterate over the userspace buffer, taking at most 255 * PAGE_SIZE bytes for - * each DMA transfer. - * For each transfer, get the user pages, build a sglist, map, build a - * descriptor table. submit the transfer. wait for the interrupt handler - * to wake us on completion. - */ -static ssize_t sg_write(struct file *file, const char __user *buf, size_t count, loff_t *pos) -{ - int hwnents, tents; - size_t transfer_len, remaining = count, done = 0; - u64 transfer_addr = (u64)buf; - /* fetch device specific data stored earlier during open */ - struct ape_dev *ape = (struct ape_dev *)file->private_data; - printk(KERN_DEBUG DRV_NAME "_write(buf=0x%p, count=%lld, pos=%llu)\n", - buf, (s64)count, (u64)*pos); - /* TODO transfer boundaries at PAGE_SIZE granularity */ - while (remaining > 0) { - /* limit DMA transfer size */ - transfer_len = (remaining < APE_CHDMA_MAX_TRANSFER_LEN) ? remaining : - APE_CHDMA_MAX_TRANSFER_LEN; - /* get all user space buffer pages and create a scattergather list */ - sgm_map_user_pages(ape->sgm, transfer_addr, transfer_len, 0/*read from userspace*/); - printk(KERN_DEBUG DRV_NAME "mapped_pages=%d\n", ape->sgm->mapped_pages); - /* map all entries in the scattergather list */ - hwnents = pci_map_sg(ape->pci_dev, ape->sgm->sgl, ape->sgm->mapped_pages, DMA_TO_DEVICE); - printk(KERN_DEBUG DRV_NAME "hwnents=%d\n", hwnents); - /* build device descriptor tables and submit them to the DMA engine */ - tents = ape_sg_to_chdma_table(ape->sgm->sgl, hwnents, 0, &ape->table_virt->desc[0], 4096); - printk(KERN_DEBUG DRV_NAME "tents=%d\n", hwnents); -#if 0 - while (tables) { - /* TODO build table */ - /* TODO submit table to the device */ - /* if engine stopped and unfinished work then start engine */ - } - put ourselves on wait queue -#endif - - dma_unmap_sg(NULL, ape->sgm->sgl, ape->sgm->mapped_pages, DMA_TO_DEVICE); - /* dirty and free the pages */ - sgm_unmap_user_pages(ape->sgm, 1/*dirtied*/); - /* book keeping */ - transfer_addr += transfer_len; - remaining -= transfer_len; - done += transfer_len; - } - return done; -} - -/* - * character device file operations - */ -static const struct file_operations sg_fops = { - .owner = THIS_MODULE, - .open = sg_open, - .release = sg_close, - .read = sg_read, - .write = sg_write, -}; - -/* sg_init() - Initialize character device - * - * XXX Should ideally be tied to the device, on device probe, not module init. - */ -static int sg_init(struct ape_dev *ape) -{ - int rc; - printk(KERN_DEBUG DRV_NAME " sg_init()\n"); - /* allocate a dynamically allocated character device node */ - rc = alloc_chrdev_region(&ape->cdevno, 0/*requested minor*/, 1/*count*/, DRV_NAME); - /* allocation failed? */ - if (rc < 0) { - printk("alloc_chrdev_region() = %d\n", rc); - goto fail_alloc; - } - /* couple the device file operations to the character device */ - cdev_init(&ape->cdev, &sg_fops); - ape->cdev.owner = THIS_MODULE; - /* bring character device live */ - rc = cdev_add(&ape->cdev, ape->cdevno, 1/*count*/); - if (rc < 0) { - printk("cdev_add() = %d\n", rc); - goto fail_add; - } - printk(KERN_DEBUG "altpciechdma = %d:%d\n", MAJOR(ape->cdevno), MINOR(ape->cdevno)); - return 0; -fail_add: - /* free the dynamically allocated character device node */ - unregister_chrdev_region(ape->cdevno, 1/*count*/); -fail_alloc: - return -1; -} - -/* sg_exit() - Cleanup character device - * - * XXX Should ideally be tied to the device, on device remove, not module exit. - */ - -static void sg_exit(struct ape_dev *ape) -{ - printk(KERN_DEBUG DRV_NAME " sg_exit()\n"); - /* remove the character device */ - cdev_del(&ape->cdev); - /* free the dynamically allocated character device node */ - unregister_chrdev_region(ape->cdevno, 1/*count*/); -} - -#endif /* ALTPCIECHDMA_CDEV */ - -/* used to register the driver with the PCI kernel sub system - * @see LDD3 page 311 - */ -static struct pci_driver pci_driver = { - .name = DRV_NAME, - .id_table = ids, - .probe = probe, - .remove = __devexit_p(remove), - /* resume, suspend are optional */ -}; - -/** - * alterapciechdma_init() - Module initialization, registers devices. - */ -static int __init alterapciechdma_init(void) -{ - int rc = 0; - printk(KERN_DEBUG DRV_NAME " init(), built at " __DATE__ " " __TIME__ "\n"); - /* register this driver with the PCI bus driver */ - rc = pci_register_driver(&pci_driver); - if (rc < 0) - return rc; - return 0; -} - -/** - * alterapciechdma_init() - Module cleanup, unregisters devices. - */ -static void __exit alterapciechdma_exit(void) -{ - printk(KERN_DEBUG DRV_NAME " exit(), built at " __DATE__ " " __TIME__ "\n"); - /* unregister this driver from the PCI bus driver */ - pci_unregister_driver(&pci_driver); -} - -MODULE_LICENSE("GPL"); - -module_init(alterapciechdma_init); -module_exit(alterapciechdma_exit); - |
