diff options
| -rw-r--r-- | Documentation/ide/ide.txt | 33 | ||||
| -rw-r--r-- | drivers/ide/ide-generic.c | 3 | ||||
| -rw-r--r-- | drivers/ide/ide-probe.c | 3 | ||||
| -rw-r--r-- | drivers/ide/ide-proc.c | 3 | ||||
| -rw-r--r-- | drivers/ide/ide.c | 41 | ||||
| -rw-r--r-- | drivers/ide/pci/cmd640.c | 2 | ||||
| -rw-r--r-- | drivers/ide/setup-pci.c | 11 | ||||
| -rw-r--r-- | include/linux/ide.h | 2 |
8 files changed, 17 insertions, 81 deletions
diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt index ae4f4f4..18c02df 100644 --- a/Documentation/ide/ide.txt +++ b/Documentation/ide/ide.txt @@ -71,29 +71,6 @@ This driver automatically probes for most IDE interfaces (including all PCI ones), for the drives/geometries attached to those interfaces, and for the IRQ lines being used by the interfaces (normally 14, 15 for ide0/ide1). -For special cases, interfaces may be specified using kernel "command line" -options. For example, - - ide3=0x168,0x36e,10 /* ioports 0x168-0x16f,0x36e, irq 10 */ - -Normally the irq number need not be specified, as ide.c will probe for it: - - ide3=0x168,0x36e /* ioports 0x168-0x16f,0x36e */ - -The standard port, and irq values are these: - - ide0=0x1f0,0x3f6,14 - ide1=0x170,0x376,15 - ide2=0x1e8,0x3ee,11 - ide3=0x168,0x36e,10 - -Note that the first parameter reserves 8 contiguous ioports, whereas the -second value denotes a single ioport. If in doubt, do a 'cat /proc/ioports'. - -In all probability the device uses these ports and IRQs if it is attached -to the appropriate ide channel. Pass the parameter for the correct ide -channel to the kernel, as explained above. - Any number of interfaces may share a single IRQ if necessary, at a slight performance penalty, whether on separate cards or a single VLB card. The IDE driver automatically detects and handles this. However, this may @@ -199,7 +176,7 @@ When ide.c is used as a module, you can pass command line parameters to the driver using the "options=" keyword to insmod, while replacing any ',' with ';'. For example: - insmod ide.o options="ide0=serialize ide1=serialize ide2=0x1e8;0x3ee;11" + insmod ide.o options="hda=nodma hdb=nodma" ================================================================================ @@ -240,14 +217,6 @@ Summary of ide driver parameters for kernel command line As for VLB, it is safest to not specify it. Bigger values are safer than smaller ones. - "idex=base" : probe for an interface at the addr specified, - where "base" is usually 0x1f0 or 0x170 - and "ctl" is assumed to be "base"+0x206 - - "idex=base,ctl" : specify both base and ctl - - "idex=base,ctl,irq" : specify base, ctl, and irq number - "idex=serialize" : do not overlap operations on idex. Please note that you will have to specify this option for both the respective primary and secondary channel diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index 387574f..bae4145 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -93,8 +93,7 @@ static int __init ide_generic_init(void) ide_hwif_t *hwif = &ide_hwifs[i]; if (hwif->io_ports[IDE_DATA_OFFSET] && - (hwif->chipset == ide_unknown || - hwif->chipset == ide_forced)) + hwif->chipset == ide_unknown) idx[i] = i; else idx[i] = 0xff; diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 8ef5194..33cb5e5 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1519,8 +1519,7 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) hwif = &ide_hwifs[idx[i]]; if (hwif->present) { - if (hwif->chipset == ide_unknown || - hwif->chipset == ide_forced) + if (hwif->chipset == ide_unknown) hwif->chipset = ide_generic; hwif_register_devices(hwif); } diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 77025d1..edd7f18 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -46,9 +46,6 @@ static int proc_ide_read_imodel int len; const char *name; - /* - * Neither ide_unknown nor ide_forced should be set at this point. - */ switch (hwif->chipset) { case ide_generic: name = "generic"; break; case ide_pci: name = "pci"; break; diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 96126b3..7e789c9 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -1170,7 +1170,7 @@ extern int probe_ht6560b; extern int probe_qd65xx; extern int cmd640_vlb; -static int __initdata is_chipset_set[MAX_HWIFS]; +static int __initdata is_chipset_set; /* * ide_setup() gets called VERY EARLY during initialization, @@ -1328,8 +1328,6 @@ static int __init ide_setup(char *s) "minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb", "dtc2278", "umc8672", "ali14xx", NULL }; - hw_regs_t hwregs; - hw = s[3] - '0'; hwif = &ide_hwifs[hw]; i = match_parm(&s[4], ide_words, vals, 3); @@ -1338,19 +1336,14 @@ static int __init ide_setup(char *s) * Cryptic check to ensure chipset not already set for hwif. * Note: we can't depend on hwif->chipset here. */ - if ((i >= -18 && i <= -11) || (i > 0 && i <= 3)) { + if (i >= -18 && i <= -11) { /* chipset already specified */ - if (is_chipset_set[hw]) + if (is_chipset_set) goto bad_option; - if (i > -18 && i <= -11) { - /* these drivers are for "ide0=" only */ - if (hw != 0) - goto bad_hwif; - /* chipset already specified for 2nd port */ - if (is_chipset_set[hw+1]) - goto bad_option; - } - is_chipset_set[hw] = 1; + /* these drivers are for "ide0=" only */ + if (hw != 0) + goto bad_hwif; + is_chipset_set = 1; printk("\n"); } @@ -1430,21 +1423,11 @@ static int __init ide_setup(char *s) case -1: /* "noprobe" */ hwif->noprobe = 1; goto obsolete_option; - - case 1: /* base */ - vals[1] = vals[0] + 0x206; /* default ctl */ - case 2: /* base,ctl */ - vals[2] = 0; /* default irq = probe for it */ - case 3: /* base,ctl,irq */ - memset(&hwregs, 0, sizeof(hwregs)); - ide_init_hwif_ports(&hwregs, vals[0], vals[1], &hwif->irq); - memcpy(hwif->io_ports, hwregs.io_ports, sizeof(hwif->io_ports)); - hwif->irq = vals[2]; - hwif->noprobe = 0; - hwif->chipset = ide_forced; - goto obsolete_option; - - case 0: goto bad_option; + case 0: + case 1: + case 2: + case 3: + goto bad_option; default: printk(" -- SUPPORT NOT CONFIGURED IN THIS KERNEL\n"); return 1; diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index 29fbc5e..58a95f6 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -415,7 +415,7 @@ static void __init setup_device_ptrs (void) cmd_hwif1 = &ide_hwifs[1]; /* default, if not found below */ for (i = 0; i < MAX_HWIFS; i++) { ide_hwif_t *hwif = &ide_hwifs[i]; - if (hwif->chipset == ide_unknown || hwif->chipset == ide_forced) { + if (hwif->chipset == ide_unknown) { if (hwif->io_ports[IDE_DATA_OFFSET] == 0x1f0) cmd_hwif0 = hwif; else if (hwif->io_ports[IDE_DATA_OFFSET] == 0x170) diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 634e3f6..ea66c99 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -41,17 +41,6 @@ static ide_hwif_t *ide_match_hwif(unsigned long io_base, u8 bootable, const char ide_hwif_t *hwif; /* - * Look for a hwif with matching io_base specified using - * parameters to ide_setup(). - */ - for (h = 0; h < MAX_HWIFS; ++h) { - hwif = &ide_hwifs[h]; - if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) { - if (hwif->chipset == ide_forced) - return hwif; /* a perfect match */ - } - } - /* * Look for a hwif with matching io_base default value. * If chipset is "ide_unknown", then claim that hwif slot. * Otherwise, some other chipset has already claimed it.. :( diff --git a/include/linux/ide.h b/include/linux/ide.h index 9cebf30..67f83c6 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -169,7 +169,7 @@ enum { ide_unknown, ide_generic, ide_pci, ide_rz1000, ide_trm290, ide_cmd646, ide_cy82c693, ide_4drives, ide_pmac, ide_etrax100, ide_acorn, - ide_au1xxx, ide_palm3710, ide_forced + ide_au1xxx, ide_palm3710 }; typedef u8 hwif_chipset_t; |
