diff options
| -rw-r--r-- | arch/arm/Kconfig | 1 | ||||
| -rw-r--r-- | arch/arm/kernel/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/kernel/kgdb.c | 201 | ||||
| -rw-r--r-- | arch/arm/kernel/setup.c | 2 | ||||
| -rw-r--r-- | arch/arm/kernel/traps.c | 5 | ||||
| -rw-r--r-- | arch/powerpc/Kconfig | 1 | ||||
| -rw-r--r-- | arch/powerpc/Kconfig.debug | 50 | ||||
| -rw-r--r-- | arch/powerpc/kernel/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/kernel/kgdb.c | 410 | ||||
| -rw-r--r-- | arch/powerpc/kernel/setup_32.c | 16 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powermac/setup.c | 6 | ||||
| -rw-r--r-- | drivers/serial/cpm_uart/cpm_uart_core.c | 95 | ||||
| -rw-r--r-- | drivers/serial/mpsc.c | 148 | ||||
| -rw-r--r-- | include/asm-arm/kgdb.h | 104 | ||||
| -rw-r--r-- | include/asm-arm/traps.h | 2 | ||||
| -rw-r--r-- | include/asm-powerpc/kgdb.h | 92 | ||||
| -rw-r--r-- | lib/Kconfig.kgdb | 3 |
17 files changed, 1025 insertions, 113 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c7ad324..d048f68 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -12,6 +12,7 @@ config ARM select RTC_LIB select SYS_SUPPORTS_APM_EMULATION select HAVE_OPROFILE + select HAVE_ARCH_KGDB select HAVE_KPROBES if (!XIP_KERNEL) select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FTRACE if (!XIP_KERNEL) diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index eb9092c..1d296fc 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o obj-$(CONFIG_ATAGS_PROC) += atags.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_ARM_THUMBEE) += thumbee.o +obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c new file mode 100644 index 0000000..aaffaec --- /dev/null +++ b/arch/arm/kernel/kgdb.c @@ -0,0 +1,201 @@ +/* + * arch/arm/kernel/kgdb.c + * + * ARM KGDB support + * + * Copyright (c) 2002-2004 MontaVista Software, Inc + * Copyright (c) 2008 Wind River Systems, Inc. + * + * Authors: George Davis <davis_g@mvista.com> + * Deepak Saxena <dsaxena@plexity.net> + */ +#include <linux/kgdb.h> +#include <asm/traps.h> + +/* Make a local copy of the registers passed into the handler (bletch) */ +void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs) +{ + int regno; + + /* Initialize all to zero. */ + for (regno = 0; regno < GDB_MAX_REGS; regno++) + gdb_regs[regno] = 0; + + gdb_regs[_R0] = kernel_regs->ARM_r0; + gdb_regs[_R1] = kernel_regs->ARM_r1; + gdb_regs[_R2] = kernel_regs->ARM_r2; + gdb_regs[_R3] = kernel_regs->ARM_r3; + gdb_regs[_R4] = kernel_regs->ARM_r4; + gdb_regs[_R5] = kernel_regs->ARM_r5; + gdb_regs[_R6] = kernel_regs->ARM_r6; + gdb_regs[_R7] = kernel_regs->ARM_r7; + gdb_regs[_R8] = kernel_regs->ARM_r8; + gdb_regs[_R9] = kernel_regs->ARM_r9; + gdb_regs[_R10] = kernel_regs->ARM_r10; + gdb_regs[_FP] = kernel_regs->ARM_fp; + gdb_regs[_IP] = kernel_regs->ARM_ip; + gdb_regs[_SPT] = kernel_regs->ARM_sp; + gdb_regs[_LR] = kernel_regs->ARM_lr; + gdb_regs[_PC] = kernel_regs->ARM_pc; + gdb_regs[_CPSR] = kernel_regs->ARM_cpsr; +} + +/* Copy local gdb registers back to kgdb regs, for later copy to kernel */ +void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs) +{ + kernel_regs->ARM_r0 = gdb_regs[_R0]; + kernel_regs->ARM_r1 = gdb_regs[_R1]; + kernel_regs->ARM_r2 = gdb_regs[_R2]; + kernel_regs->ARM_r3 = gdb_regs[_R3]; + kernel_regs->ARM_r4 = gdb_regs[_R4]; + kernel_regs->ARM_r5 = gdb_regs[_R5]; + kernel_regs->ARM_r6 = gdb_regs[_R6]; + kernel_regs->ARM_r7 = gdb_regs[_R7]; + kernel_regs->ARM_r8 = gdb_regs[_R8]; + kernel_regs->ARM_r9 = gdb_regs[_R9]; + kernel_regs->ARM_r10 = gdb_regs[_R10]; + kernel_regs->ARM_fp = gdb_regs[_FP]; + kernel_regs->ARM_ip = gdb_regs[_IP]; + kernel_regs->ARM_sp = gdb_regs[_SPT]; + kernel_regs->ARM_lr = gdb_regs[_LR]; + kernel_regs->ARM_pc = gdb_regs[_PC]; + kernel_regs->ARM_cpsr = gdb_regs[_CPSR]; +} + +void +sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task) +{ + struct pt_regs *thread_regs; + int regno; + + /* Just making sure... */ + if (task == NULL) + return; + + /* Initialize to zero */ + for (regno = 0; regno < GDB_MAX_REGS; regno++) + gdb_regs[regno] = 0; + + /* Otherwise, we have only some registers from switch_to() */ + thread_regs = task_pt_regs(task); + gdb_regs[_R0] = thread_regs->ARM_r0; + gdb_regs[_R1] = thread_regs->ARM_r1; + gdb_regs[_R2] = thread_regs->ARM_r2; + gdb_regs[_R3] = thread_regs->ARM_r3; + gdb_regs[_R4] = thread_regs->ARM_r4; + gdb_regs[_R5] = thread_regs->ARM_r5; + gdb_regs[_R6] = thread_regs->ARM_r6; + gdb_regs[_R7] = thread_regs->ARM_r7; + gdb_regs[_R8] = thread_regs->ARM_r8; + gdb_regs[_R9] = thread_regs->ARM_r9; + gdb_regs[_R10] = thread_regs->ARM_r10; + gdb_regs[_FP] = thread_regs->ARM_fp; + gdb_regs[_IP] = thread_regs->ARM_ip; + gdb_regs[_SPT] = thread_regs->ARM_sp; + gdb_regs[_LR] = thread_regs->ARM_lr; + gdb_regs[_PC] = thread_regs->ARM_pc; + gdb_regs[_CPSR] = thread_regs->ARM_cpsr; +} + +static int compiled_break; + +int kgdb_arch_handle_exception(int exception_vector, int signo, + int err_code, char *remcom_in_buffer, + char *remcom_out_buffer, + struct pt_regs *linux_regs) +{ + unsigned long addr; + char *ptr; + + switch (remcom_in_buffer[0]) { + case 'D': + case 'k': + case 'c': + kgdb_contthread = NULL; + + /* + * Try to read optional parameter, pc unchanged if no parm. + * If this was a compiled breakpoint, we need to move + * to the next instruction or we will just breakpoint + * over and over again. + */ + ptr = &remcom_in_buffer[1]; + if (kgdb_hex2long(&ptr, &addr)) + linux_regs->ARM_pc = addr; + else if (compiled_break == 1) + linux_regs->ARM_pc += 4; + + compiled_break = 0; + + return 0; + } + + return -1; +} + +static int kgdb_brk_fn(struct pt_regs *regs, unsigned int instr) +{ + kgdb_handle_exception(1, SIGTRAP, 0, regs); + + return 0; +} + +static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr) +{ + compiled_break = 1; + kgdb_handle_exception(1, SIGTRAP, 0, regs); + + return 0; +} + +static struct undef_hook kgdb_brkpt_hook = { + .instr_mask = 0xffffffff, + .instr_val = KGDB_BREAKINST, + .fn = kgdb_brk_fn +}; + +static struct undef_hook kgdb_compiled_brkpt_hook = { + .instr_mask = 0xffffffff, + .instr_val = KGDB_COMPILED_BREAK, + .fn = kgdb_compiled_brk_fn +}; + +/** + * kgdb_arch_init - Perform any architecture specific initalization. + * + * This function will handle the initalization of any architecture + * specific callbacks. + */ +int kgdb_arch_init(void) +{ + register_undef_hook(&kgdb_brkpt_hook); + register_undef_hook(&kgdb_compiled_brkpt_hook); + + return 0; +} + +/** + * kgdb_arch_exit - Perform any architecture specific uninitalization. + * + * This function will handle the uninitalization of any architecture + * specific callbacks, for dynamic registration and unregistration. + */ +void kgdb_arch_exit(void) +{ + unregister_undef_hook(&kgdb_brkpt_hook); + unregister_undef_hook(&kgdb_compiled_brkpt_hook); +} + +/* + * Register our undef instruction hooks with ARM undef core. + * We regsiter a hook specifically looking for the KGB break inst + * and we handle the normal undef case within the do_undefinstr + * handler. + */ +struct kgdb_arch arch_kgdb_ops = { +#ifndef __ARMEB__ + .gdb_bpt_instr = {0xfe, 0xde, 0xff, 0xe7} +#else /* ! __ARMEB__ */ + .gdb_bpt_instr = {0xe7, 0xff, 0xde, 0xfe} +#endif +}; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index b7b0720..38f0e79 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -36,6 +36,7 @@ #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> +#include <asm/traps.h> #include "compat.h" #include "atags.h" @@ -853,6 +854,7 @@ void __init setup_arch(char **cmdline_p) conswitchp = &dummy_con; #endif #endif + early_trap_init(); } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 5595fdd..7277aef 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -708,6 +708,11 @@ EXPORT_SYMBOL(abort); void __init trap_init(void) { + return; +} + +void __init early_trap_init(void) +{ unsigned long vectors = CONFIG_VECTORS_BASE; extern char __stubs_start[], __stubs_end[]; extern char __vectors_start[], __vectors_end[]; diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 4c22242..737ebf9 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -112,6 +112,7 @@ config PPC select HAVE_FTRACE select HAVE_IDE select HAVE_KPROBES + select HAVE_ARCH_KGDB select HAVE_KRETPROBES select HAVE_LMB select HAVE_DMA_ATTRS if PPC64 diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 2840ab6..8c8aadb 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -41,22 +41,6 @@ config HCALL_STATS This option will add a small amount of overhead to all hypervisor calls. -config DEBUGGER - bool "Enable debugger hooks" - depends on DEBUG_KERNEL - help - Include in-kernel hooks for kernel debuggers. Unless you are - intending to debug the kernel, say N here. - -config KGDB - bool "Include kgdb kernel debugger" - depends on DEBUGGER && (BROKEN || PPC_GEN550 || 4xx) - select DEBUG_INFO - help - Include in-kernel hooks for kgdb, the Linux kernel source level - debugger. See <http://kgdb.sourceforge.net/> for more information. - Unless you are intending to debug the kernel, say N here. - config CODE_PATCHING_SELFTEST bool "Run self-tests of the code-patching code." depends on DEBUG_KERNEL @@ -67,36 +51,9 @@ config FTR_FIXUP_SELFTEST depends on DEBUG_KERNEL default n -choice - prompt "Serial Port" - depends on KGDB - default KGDB_TTYS1 - -config KGDB_TTYS0 - bool "ttyS0" - -config KGDB_TTYS1 - bool "ttyS1" - -config KGDB_TTYS2 - bool "ttyS2" - -config KGDB_TTYS3 - bool "ttyS3" - -endchoice - -config KGDB_CONSOLE - bool "Enable serial console thru kgdb port" - depends on KGDB && 8xx || CPM2 - help - If you enable this, all serial console messages will be sent - over the gdb stub. - If unsure, say N. - config XMON bool "Include xmon kernel debugger" - depends on DEBUGGER + depends on DEBUG_KERNEL help Include in-kernel hooks for the xmon kernel monitor/debugger. Unless you are intending to debug the kernel, say N here. @@ -126,6 +83,11 @@ config XMON_DISASSEMBLY to say Y here, unless you're building for a memory-constrained system. +config DEBUGGER + bool + depends on KGDB || XMON + default y + config IRQSTACKS bool "Use separate kernel stacks when processing interrupts" help diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index bf0b1fd..1a40947 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -74,6 +74,7 @@ obj-y += time.o prom.o traps.o setup-common.o \ misc_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_PPC32) += entry_32.o setup_32.o obj-$(CONFIG_PPC64) += dma_64.o iommu.o +obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c new file mode 100644 index 0000000..b4fdf2f --- /dev/null +++ b/arch/powerpc/kernel/kgdb.c @@ -0,0 +1,410 @@ +/* + * PowerPC backend to the KGDB stub. + * + * 1998 (c) Michael AK Tesch (tesch@cs.wisc.edu) + * Copyright (C) 2003 Timesys Corporation. + * Copyright (C) 2004-2006 MontaVista Software, Inc. + * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com) + * PPC32 support restored by Vitaly Wool <vwool@ru.mvista.com> and + * Sergei Shtylyov <sshtylyov@ru.mvista.com> + * Copyright (C) 2007-2008 Wind River Systems, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program as licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/kgdb.h> +#include <linux/smp.h> +#include <linux/signal.h> +#include <linux/ptrace.h> +#include <asm/current.h> +#include <asm/processor.h> +#include <asm/machdep.h> + +/* + * This table contains the mapping between PowerPC hardware trap types, and + * signals, which are primarily what GDB understands. GDB and the kernel + * don't always agree on values, so we use constants taken from gdb-6.2. + */ +static struct hard_trap_info +{ + unsigned int tt; /* Trap type code for powerpc */ + unsigned char signo; /* Signal that we map this trap into */ +} hard_trap_info[] = { + { 0x0100, 0x02 /* SIGINT */ }, /* system reset */ + { 0x0200, 0x0b /* SIGSEGV */ }, /* machine check */ + { 0x0300, 0x0b /* SIGSEGV */ }, /* data access */ + { 0x0400, 0x0b /* SIGSEGV */ }, /* instruction access */ + { 0x0500, 0x02 /* SIGINT */ }, /* external interrupt */ + { 0x0600, 0x0a /* SIGBUS */ }, /* alignment */ + { 0x0700, 0x05 /* SIGTRAP */ }, /* program check */ + { 0x0800, 0x08 /* SIGFPE */ }, /* fp unavailable */ + { 0x0900, 0x0e /* SIGALRM */ }, /* decrementer */ + { 0x0c00, 0x14 /* SIGCHLD */ }, /* system call */ +#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) + { 0x2002, 0x05 /* SIGTRAP */ }, /* debug */ +#if defined(CONFIG_FSL_BOOKE) + { 0x2010, 0x08 /* SIGFPE */ }, /* spe unavailable */ + { 0x2020, 0x08 /* SIGFPE */ }, /* spe unavailable */ + { 0x2030, 0x08 /* SIGFPE */ }, /* spe fp data */ + { 0x2040, 0x08 /* SIGFPE */ }, /* spe fp data */ + { 0x2050, 0x08 /* SIGFPE */ }, /* spe fp round */ + { 0x2060, 0x0e /* SIGILL */ }, /* performace monitor */ + { 0x2900, 0x08 /* SIGFPE */ }, /* apu unavailable */ + { 0x3100, 0x0e /* SIGALRM */ }, /* fixed interval timer */ + { 0x3200, 0x02 /* SIGINT */ }, /* watchdog */ +#else /* ! CONFIG_FSL_BOOKE */ + { 0x1000, 0x0e /* SIGALRM */ }, /* prog interval timer */ + { 0x1010, 0x0e /* SIGALRM */ }, /* fixed interval timer */ + { 0x1020, 0x02 /* SIGINT */ }, /* watchdog */ + { 0x2010, 0x08 /* SIGFPE */ }, /* fp unavailable */ + { 0x2020, 0x08 /* SIGFPE */ }, /* ap unavailable */ +#endif +#else /* ! (defined(CONFIG_40x) || defined(CONFIG_BOOKE)) */ + { 0x0d00, 0x05 /* SIGTRAP */ }, /* single-step */ +#if defined(CONFIG_8xx) + { 0x1000, 0x04 /* SIGILL */ }, /* software emulation */ +#else /* ! CONFIG_8xx */ + { 0x0f00, 0x04 /* SIGILL */ }, /* performance monitor */ + { 0x0f20, 0x08 /* SIGFPE */ }, /* altivec unavailable */ + { 0x1300, 0x05 /* SIGTRAP */ }, /* instruction address break */ +#if defined(CONFIG_PPC64) + { 0x1200, 0x05 /* SIGILL */ }, /* system error */ + { 0x1500, 0x04 /* SIGILL */ }, /* soft patch */ + { 0x1600, 0x04 /* SIGILL */ }, /* maintenance */ + { 0x1700, 0x08 /* SIGFPE */ }, /* altivec assist */ + { 0x1800, 0x04 /* SIGILL */ }, /* thermal */ +#else /* ! CONFIG_PPC64 */ + { 0x1400, 0x02 /* SIGINT */ }, /* SMI */ + { 0x1600, 0x08 /* SIGFPE */ }, /* altivec assist */ + { 0x1700, 0x04 /* SIGILL */ }, /* TAU */ + { 0x2000, 0x05 /* SIGTRAP */ }, /* run mode */ +#endif +#endif +#endif + { 0x0000, 0x00 } /* Must be last */ +}; + +static int computeSignal(unsigned int tt) +{ + struct hard_trap_info *ht; + + for (ht = hard_trap_info; ht->tt && ht->signo; ht++) + if (ht->tt == tt) + return ht->signo; + + return SIGHUP; /* default for things we don't know about */ +} + +static int kgdb_call_nmi_hook(struct pt_regs *regs) +{ + kgdb_nmicallback(raw_smp_processor_id(), regs); + return 0; +} + +#ifdef CONFIG_SMP +void kgdb_roundup_cpus(unsigned long flags) +{ + smp_send_debugger_break(MSG_ALL_BUT_SELF); +} +#endif + +/* KGDB functions to use existing PowerPC64 hooks. */ +static int kgdb_debugger(struct pt_regs *regs) +{ + return kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs); +} + +static int kgdb_handle_breakpoint(struct pt_regs *regs) +{ + if (user_mode(regs)) + return 0; + + if (kgdb_handle_exception(0, SIGTRAP, 0, regs) != 0) + return 0; + + if (*(u32 *) (regs->nip) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr)) + regs->nip += 4; + + return 1; +} + +static int kgdb_singlestep(struct pt_regs *regs) +{ + struct thread_info *thread_info, *exception_thread_info; + + if (user_mode(regs)) + return 0; + + /* + * On Book E and perhaps other processsors, singlestep is handled on + * the critical exception stack. This causes current_thread_info() + * to fail, since it it locates the thread_info by masking off + * the low bits of the current stack pointer. We work around + * this issue by copying the thread_info from the kernel stack + * before calling kgdb_handle_exception, and copying it back + * afterwards. On most processors the copy is avoided since + * exception_thread_info == thread_info. + */ + thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1)); + exception_thread_info = current_thread_info(); + + if (thread_info != exception_thread_info) + memcpy(exception_thread_info, thread_info, sizeof *thread_info); + + kgdb_handle_exception(0, SIGTRAP, 0, regs); + + if (thread_info != exception_thread_info) + memcpy(thread_info, exception_thread_info, sizeof *thread_info); + + return 1; +} + +static int kgdb_iabr_match(struct pt_regs *regs) +{ + if (user_mode(regs)) + return 0; + + if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0) + return 0; + return 1; +} + +static int kgdb_dabr_match(struct pt_regs *regs) +{ + if (user_mode(regs)) + return 0; + + if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0) + return 0; + return 1; +} + +#define PACK64(ptr, src) do { *(ptr++) = (src); } while (0) + +#define PACK32(ptr, src) do { \ + u32 *ptr32; \ + ptr32 = (u32 *)ptr; \ + *(ptr32++) = (src); \ + ptr = (unsigned long *)ptr32; \ + } while (0) + + +void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) +{ + unsigned long *ptr = gdb_regs; + int reg; + + memset(gdb_regs, 0, NUMREGBYTES); + + for (reg = 0; reg < 32; reg++) + PACK64(ptr, regs->gpr[reg]); + +#ifdef CONFIG_FSL_BOOKE +#ifdef CONFIG_SPE + for (reg = 0; reg < 32; reg++) + PACK64(ptr, current->thread.evr[reg]); +#else + ptr += 32; +#endif +#else + /* fp registers not used by kernel, leave zero */ + ptr += 32 * 8 / sizeof(long); +#endif + + PACK64(ptr, regs->nip); + PACK64(ptr, regs->msr); + PACK32(ptr, regs->ccr); + PACK64(ptr, regs->link); + PACK64(ptr, regs->ctr); + PACK32(ptr, regs->xer); + + BUG_ON((unsigned long)ptr > + (unsigned long)(((void *)gdb_regs) + NUMREGBYTES)); +} + +void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) +{ + struct pt_regs *regs = (struct pt_regs *)(p->thread.ksp + + STACK_FRAME_OVERHEAD); + unsigned long *ptr = gdb_regs; + int reg; + + memset(gdb_regs, 0, NUMREGBYTES); + + /* Regs GPR0-2 */ + for (reg = 0; reg < 3; reg++) + PACK64(ptr, regs->gpr[reg]); + + /* Regs GPR3-13 are caller saved, not in regs->gpr[] */ + ptr += 11; + + /* Regs GPR14-31 */ + for (reg = 14; reg < 32; reg++) + PACK64(ptr, regs->gpr[reg]); + +#ifdef CONFIG_FSL_BOOKE +#ifdef CONFIG_SPE + for (reg = 0; reg < 32; reg++) + PACK64(ptr, p->thread.evr[reg]); +#else + ptr += 32; +#endif +#else + /* fp registers not used by kernel, leave zero */ + ptr += 32 * 8 / sizeof(long); +#endif + + PACK64(ptr, regs->nip); + PACK64(ptr, regs->msr); + PACK32(ptr, regs->ccr); + PACK64(ptr, regs->link); + PACK64(ptr, regs->ctr); + PACK32(ptr, regs->xer); + + BUG_ON((unsigned long)ptr > + (unsigned long)(((void *)gdb_regs) + NUMREGBYTES)); +} + +#define UNPACK64(dest, ptr) do { dest = *(ptr++); } while (0) + +#define UNPACK32(dest, ptr) do { \ + u32 *ptr32; \ + ptr32 = (u32 *)ptr; \ + dest = *(ptr32++); \ + ptr = (unsigned long *)ptr32; \ + } while (0) + +void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) +{ + unsigned long *ptr = gdb_regs; + int reg; +#ifdef CONFIG_SPE + union { + u32 v32[2]; + u64 v64; + } acc; +#endif + + for (reg = 0; reg < 32; reg++) + UNPACK64(regs->gpr[reg], ptr); + +#ifdef CONFIG_FSL_BOOKE +#ifdef CONFIG_SPE + for (reg = 0; reg < 32; reg++) + UNPACK64(current->thread.evr[reg], ptr); +#else + ptr += 32; +#endif +#else + /* fp registers not used by kernel, leave zero */ + ptr += 32 * 8 / sizeof(int); +#endif + + UNPACK64(regs->nip, ptr); + UNPACK64(regs->msr, ptr); + UNPACK32(regs->ccr, ptr); + UNPACK64(regs->link, ptr); + UNPACK64(regs->ctr, ptr); + UNPACK32(regs->xer, ptr); + + BUG_ON((unsigned long)ptr > + (unsigned long)(((void *)gdb_regs) + NUMREGBYTES)); +} + +/* + * This function does PowerPC specific procesing for interfacing to gdb. + */ +int kgdb_arch_handle_exception(int vector, int signo, int err_code, + char *remcom_in_buffer, char *remcom_out_buffer, + struct pt_regs *linux_regs) +{ + char *ptr = &remcom_in_buffer[1]; + unsigned long addr; + + switch (remcom_in_buffer[0]) { + /* + * sAA..AA Step one instruction from AA..AA + * This will return an error to gdb .. + */ + case 's': + case 'c': + /* handle the optional parameter */ + if (kgdb_hex2long(&ptr, &addr)) + linux_regs->nip = addr; + + atomic_set(&kgdb_cpu_doing_single_step, -1); + /* set the trace bit if we're stepping */ + if (remcom_in_buffer[0] == 's') { +#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) + mtspr(SPRN_DBCR0, + mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM); + linux_regs->msr |= MSR_DE; +#else + linux_regs->msr |= MSR_SE; +#endif + kgdb_single_step = 1; + if (kgdb_contthread) + atomic_set(&kgdb_cpu_doing_single_step, + raw_smp_processor_id()); + } + return 0; + } + + return -1; +} + +/* + * Global data + */ +struct kgdb_arch arch_kgdb_ops = { + .gdb_bpt_instr = {0x7d, 0x82, 0x10, 0x08}, +}; + +static int kgdb_not_implemented(struct pt_regs *regs) +{ + return 0; +} + +static void *old__debugger_ipi; +static void *old__debugger; +static void *old__debugger_bpt; +static void *old__debugger_sstep; +static void *old__debugger_iabr_match; +static void *old__debugger_dabr_match; +static void *old__debugger_fault_handler; + +int kgdb_arch_init(void) +{ + old__debugger_ipi = __debugger_ipi; + old__debugger = __debugger; + old__debugger_bpt = __debugger_bpt; + old__debugger_sstep = __debugger_sstep; + old__debugger_iabr_match = __debugger_iabr_match; + old__debugger_dabr_match = __debugger_dabr_match; + old__debugger_fault_handler = __debugger_fault_handler; + + __debugger_ipi = kgdb_call_nmi_hook; + __debugger = kgdb_debugger; + __debugger_bpt = kgdb_handle_breakpoint; + __debugger_sstep = kgdb_singlestep; + __debugger_iabr_match = kgdb_iabr_match; + __debugger_dabr_match = kgdb_dabr_match; + __debugger_fault_handler = kgdb_not_implemented; + + return 0; +} + +void kgdb_arch_exit(void) +{ + __debugger_ipi = old__debugger_ipi; + __debugger = old__debugger; + __debugger_bpt = old__debugger_bpt; + __debugger_sstep = old__debugger_sstep; + __debugger_iabr_match = old__debugger_iabr_match; + __debugger_dabr_match = old__debugger_dabr_match; + __debugger_fault_handler = old__debugger_fault_handler; +} diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 4efebe8..066e65c 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -43,10 +43,6 @@ #define DBG(fmt...) -#if defined CONFIG_KGDB -#include <asm/kgdb.h> -#endif - extern void bootx_init(unsigned long r4, unsigned long phys); int boot_cpuid; @@ -302,18 +298,6 @@ void __init setup_arch(char **cmdline_p) xmon_setup(); -#if defined(CONFIG_KGDB) - if (ppc_md.kgdb_map_scc) - ppc_md.kgdb_map_scc(); - set_debug_traps(); - if (strstr(cmd_line, "gdb")) { - if (ppc_md.progress) - ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000); - printk("kgdb breakpoint activated\n"); - breakpoint(); - } -#endif - /* * Set cache line size based on type of cpu as a default. * Systems with OF can look in the properties on the cpu node(s) diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 00bd016..3163544 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -97,8 +97,6 @@ extern struct machdep_calls pmac_md; int sccdbg; #endif -extern void zs_kgdb_hook(int tty_num); - sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN; EXPORT_SYMBOL(sys_ctrler); @@ -329,10 +327,6 @@ static void __init pmac_setup_arch(void) l2cr_init(); #endif /* CONFIG_PPC32 */ -#ifdef CONFIG_KGDB - zs_kgdb_hook(0); -#endif - find_via_cuda(); find_via_pmu(); smu_init(); diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 93e407e..1ff80de 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -201,6 +201,10 @@ static void cpm_uart_int_tx(struct uart_port *port) cpm_uart_tx_pump(port); } +#ifdef CONFIG_CONSOLE_POLL +static int serial_polled; +#endif + /* * Receive characters */ @@ -222,6 +226,12 @@ static void cpm_uart_int_rx(struct uart_port *port) */ bdp = pinfo->rx_cur; for (;;) { +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return; + } +#endif /* get status */ status = in_be16(&bdp->cbd_sc); /* If this one is empty, return happy */ @@ -253,7 +263,12 @@ static void cpm_uart_int_rx(struct uart_port *port) goto handle_error; if (uart_handle_sysrq_char(port, ch)) continue; - +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return; + } +#endif error_return: tty_insert_flip_char(tty, ch, flg); @@ -865,6 +880,80 @@ static void cpm_uart_config_port(struct uart_port *port, int flags) cpm_uart_request_port(port); } } + +#ifdef CONFIG_CONSOLE_POLL +/* Serial polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +#define GDB_BUF_SIZE 512 /* power of 2, please */ + +static char poll_buf[GDB_BUF_SIZE]; +static char *pollp; +static int poll_chars; + +static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo) +{ + u_char c, *cp; + volatile cbd_t *bdp; + int i; + + /* Get the address of the host memory buffer. + */ + bdp = pinfo->rx_cur; + while (bdp->cbd_sc & BD_SC_EMPTY) + ; + + /* If the buffer address is in the CPM DPRAM, don't + * convert it. + */ + cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); + + if (obuf) { + i = c = bdp->cbd_datlen; + while (i-- > 0) + *obuf++ = *cp++; + } else + c = *cp; + bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID); + bdp->cbd_sc |= BD_SC_EMPTY; + + if (bdp->cbd_sc & BD_SC_WRAP) + bdp = pinfo->rx_bd_base; + else + bdp++; + pinfo->rx_cur = (cbd_t *)bdp; + + return (int)c; +} + +static int cpm_get_poll_char(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (!serial_polled) { + serial_polled = 1; + poll_chars = 0; + } + if (poll_chars <= 0) { + poll_chars = poll_wait_key(poll_buf, pinfo); + pollp = poll_buf; + } + poll_chars--; + return *pollp++; +} + +static void cpm_put_poll_char(struct uart_port *port, + unsigned char c) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + static char ch[2]; + + ch[0] = (char)c; + cpm_uart_early_write(pinfo->port.line, ch, 1); +} +#endif /* CONFIG_CONSOLE_POLL */ + static struct uart_ops cpm_uart_pops = { .tx_empty = cpm_uart_tx_empty, .set_mctrl = cpm_uart_set_mctrl, @@ -882,6 +971,10 @@ static struct uart_ops cpm_uart_pops = { .request_port = cpm_uart_request_port, .config_port = cpm_uart_config_port, .verify_port = cpm_uart_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = cpm_get_poll_char, + .poll_put_char = cpm_put_poll_char, +#endif }; struct uart_cpm_port cpm_uart_ports[UART_NR]; diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c index c9f53e7..61d3ade 100644 --- a/drivers/serial/mpsc.c +++ b/drivers/serial/mpsc.c @@ -921,6 +921,10 @@ static int mpsc_make_ready(struct mpsc_port_info *pi) return 0; } +#ifdef CONFIG_CONSOLE_POLL +static int serial_polled; +#endif + /* ****************************************************************************** * @@ -956,7 +960,12 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi) while (!((cmdstat = be32_to_cpu(rxre->cmdstat)) & SDMA_DESC_CMDSTAT_O)) { bytes_in = be16_to_cpu(rxre->bytecnt); - +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return 0; + } +#endif /* Following use of tty struct directly is deprecated */ if (unlikely(tty_buffer_request_room(tty, bytes_in) < bytes_in)) { @@ -1017,6 +1026,12 @@ static int mpsc_rx_intr(struct mpsc_port_info *pi) if (uart_handle_sysrq_char(&pi->port, *bp)) { bp++; bytes_in--; +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return 0; + } +#endif goto next_frame; } @@ -1519,6 +1534,133 @@ static int mpsc_verify_port(struct uart_port *port, struct serial_struct *ser) return rc; } +#ifdef CONFIG_CONSOLE_POLL +/* Serial polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static char poll_buf[2048]; +static int poll_ptr; +static int poll_cnt; +static void mpsc_put_poll_char(struct uart_port *port, + unsigned char c); + +static int mpsc_get_poll_char(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + struct mpsc_rx_desc *rxre; + u32 cmdstat, bytes_in, i; + u8 *bp; + + if (!serial_polled) + serial_polled = 1; + + pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line); + + if (poll_cnt) { + poll_cnt--; + return poll_buf[poll_ptr++]; + } + poll_ptr = 0; + poll_cnt = 0; + + while (poll_cnt == 0) { + rxre = (struct mpsc_rx_desc *)(pi->rxr + + (pi->rxr_posn*MPSC_RXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)rxre, + MPSC_RXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + /* + * Loop through Rx descriptors handling ones that have + * been completed. + */ + while (poll_cnt == 0 && + !((cmdstat = be32_to_cpu(rxre->cmdstat)) & + SDMA_DESC_CMDSTAT_O)){ + bytes_in = be16_to_cpu(rxre->bytecnt); + bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE); + dma_cache_sync(pi->port.dev, (void *) bp, + MPSC_RXBE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)bp, + (ulong)bp + MPSC_RXBE_SIZE); +#endif + if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR | + SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) && + !(cmdstat & pi->port.ignore_status_mask)) { + poll_buf[poll_cnt] = *bp; + poll_cnt++; + } else { + for (i = 0; i < bytes_in; i++) { + poll_buf[poll_cnt] = *bp++; + poll_cnt++; + } + pi->port.icount.rx += bytes_in; + } + rxre->bytecnt = cpu_to_be16(0); + wmb(); + rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | + SDMA_DESC_CMDSTAT_EI | + SDMA_DESC_CMDSTAT_F | + SDMA_DESC_CMDSTAT_L); + wmb(); + dma_cache_sync(pi->port.dev, (void *)rxre, + MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + + /* Advance to next descriptor */ + pi->rxr_posn = (pi->rxr_posn + 1) & + (MPSC_RXR_ENTRIES - 1); + rxre = (struct mpsc_rx_desc *)(pi->rxr + + (pi->rxr_posn * MPSC_RXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)rxre, + MPSC_RXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + } + + /* Restart rx engine, if its stopped */ + if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0) + mpsc_start_rx(pi); + } + if (poll_cnt) { + poll_cnt--; + return poll_buf[poll_ptr++]; + } + + return 0; +} + + +static void mpsc_put_poll_char(struct uart_port *port, + unsigned char c) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 data; + + data = readl(pi->mpsc_base + MPSC_MPCR); + writeb(c, pi->mpsc_base + MPSC_CHR_1); + mb(); + data = readl(pi->mpsc_base + MPSC_CHR_2); + data |= MPSC_CHR_2_TTCS; + writel(data, pi->mpsc_base + MPSC_CHR_2); + mb(); + + while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_TTCS); +} +#endif static struct uart_ops mpsc_pops = { .tx_empty = mpsc_tx_empty, @@ -1537,6 +1679,10 @@ static struct uart_ops mpsc_pops = { .request_port = mpsc_request_port, .config_port = mpsc_config_port, .verify_port = mpsc_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = mpsc_get_poll_char, + .poll_put_char = mpsc_put_poll_char, +#endif }; /* diff --git a/include/asm-arm/kgdb.h b/include/asm-arm/kgdb.h new file mode 100644 index 0000000..67af4b8 --- /dev/null +++ b/include/asm-arm/kgdb.h @@ -0,0 +1,104 @@ +/* + * ARM KGDB support + * + * Author: Deepak Saxena <dsaxena@mvista.com> + * + * Copyright (C) 2002 MontaVista Software Inc. + * + */ + +#ifndef __ARM_KGDB_H__ +#define __ARM_KGDB_H__ + +#include <linux/ptrace.h> + +/* + * GDB assumes that we're a user process being debugged, so + * it will send us an SWI command to write into memory as the + * debug trap. When an SWI occurs, the next instruction addr is + * placed into R14_svc before jumping to the vector trap. + * This doesn't work for kernel debugging as we are already in SVC + * we would loose the kernel's LR, which is a bad thing. This + * is bad thing. + * + * By doing this as an undefined instruction trap, we force a mode + * switch from SVC to UND mode, allowing us to save full kernel state. + * + * We also define a KGDB_COMPILED_BREAK which can be used to compile + * in breakpoints. This is important for things like sysrq-G and for + * the initial breakpoint from trap_init(). + * + * Note to ARM HW designers: Add real trap support like SH && PPC to + * make our lives much much simpler. :) + */ +#define BREAK_INSTR_SIZE 4 +#define GDB_BREAKINST 0xef9f0001 +#define KGDB_BREAKINST 0xe7ffdefe +#define KGDB_COMPILED_BREAK 0xe7ffdeff +#define CACHE_FLUSH_IS_SAFE 1 + +#ifndef __ASSEMBLY__ + +static inline void arch_kgdb_breakpoint(void) +{ + asm(".word 0xe7ffdeff"); +} + +extern void kgdb_handle_bus_error(void); +extern int kgdb_fault_expected; + +#endif /* !__ASSEMBLY__ */ + +/* + * From Kevin Hilman: + * + * gdb is expecting the following registers layout. + * + * r0-r15: 1 long word each + * f0-f7: unused, 3 long words each !! + * fps: unused, 1 long word + * cpsr: 1 long word + * + * Even though f0-f7 and fps are not used, they need to be + * present in the registers sent for correct processing in + * the host-side gdb. + * + * In particular, it is crucial that CPSR is in the right place, + * otherwise gdb will not be able to correctly interpret stepping over + * conditional branches. + */ +#define _GP_REGS 16 +#define _FP_REGS 8 +#define _EXTRA_REGS 2 +#define GDB_MAX_REGS (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS) + +#define KGDB_MAX_NO_CPUS 1 +#define BUFMAX 400 +#define NUMREGBYTES (GDB_MAX_REGS << 2) +#define NUMCRITREGBYTES (32 << 2) + +#define _R0 0 +#define _R1 1 +#define _R2 2 +#define _R3 3 +#define _R4 4 +#define _R5 5 +#define _R6 6 +#define _R7 7 +#define _R8 8 +#define _R9 9 +#define _R10 10 +#define _FP 11 +#define _IP 12 +#define _SPT 13 +#define _LR 14 +#define _PC 15 +#define _CPSR (GDB_MAX_REGS - 1) + +/* + * So that we can denote the end of a frame for tracing, + * in the simple case: + */ +#define CFI_END_FRAME(func) __CFI_END_FRAME(_PC, _SPT, func) + +#endif /* __ASM_KGDB_H__ */ diff --git a/include/asm-arm/traps.h b/include/asm-arm/traps.h index f1541af..aa399ae 100644 --- a/include/asm-arm/traps.h +++ b/include/asm-arm/traps.h @@ -24,4 +24,6 @@ static inline int in_exception_text(unsigned long ptr) ptr < (unsigned long)&__exception_text_end; } +extern void __init early_trap_init(void); + #endif diff --git a/include/asm-powerpc/kgdb.h b/include/asm-powerpc/kgdb.h index b617dac..1399caf 100644 --- a/include/asm-powerpc/kgdb.h +++ b/include/asm-powerpc/kgdb.h @@ -1,57 +1,65 @@ /* - * kgdb.h: Defines and declarations for serial line source level - * remote debugging of the Linux kernel using gdb. + * include/asm-powerpc/kgdb.h * + * The PowerPC (32/64) specific defines / externs for KGDB. Based on + * the previous 32bit and 64bit specific files, which had the following + * copyrights: + * + * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com) + * PPC Mods (C) 2004 Tom Rini (trini@mvista.com) + * PPC Mods (C) 2003 John Whitney (john.whitney@timesys.com) * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu) * + * * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Author: Tom Rini <trini@kernel.crashing.org> + * + * 2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. */ #ifdef __KERNEL__ -#ifndef _PPC_KGDB_H -#define _PPC_KGDB_H +#ifndef __POWERPC_KGDB_H__ +#define __POWERPC_KGDB_H__ #ifndef __ASSEMBLY__ -/* Things specific to the gen550 backend. */ -struct uart_port; - -extern void gen550_progress(char *, unsigned short); -extern void gen550_kgdb_map_scc(void); -extern void gen550_init(int, struct uart_port *); - -/* Things specific to the pmac backend. */ -extern void zs_kgdb_hook(int tty_num); - -/* To init the kgdb engine. (called by serial hook)*/ -extern void set_debug_traps(void); - -/* To enter the debugger explicitly. */ -extern void breakpoint(void); - -/* For taking exceptions - * these are defined in traps.c - */ -extern int (*debugger)(struct pt_regs *regs); -extern int (*debugger_bpt)(struct pt_regs *regs); -extern int (*debugger_sstep)(struct pt_regs *regs); -extern int (*debugger_iabr_match)(struct pt_regs *regs); -extern int (*debugger_dabr_match)(struct pt_regs *regs); -extern void (*debugger_fault_handler)(struct pt_regs *regs); - -/* What we bring to the party */ -int kgdb_bpt(struct pt_regs *regs); -int kgdb_sstep(struct pt_regs *regs); -void kgdb(struct pt_regs *regs); -int kgdb_iabr_match(struct pt_regs *regs); -int kgdb_dabr_match(struct pt_regs *regs); +#define BREAK_INSTR_SIZE 4 +#define BUFMAX ((NUMREGBYTES * 2) + 512) +#define OUTBUFMAX ((NUMREGBYTES * 2) + 512) +static inline void arch_kgdb_breakpoint(void) +{ + asm(".long 0x7d821008"); /* twge r2, r2 */ +} +#define CACHE_FLUSH_IS_SAFE 1 +/* The number bytes of registers we have to save depends on a few + * things. For 64bit we default to not including vector registers and + * vector state registers. */ +#ifdef CONFIG_PPC64 /* - * external low-level support routines (ie macserial.c) + * 64 bit (8 byte) registers: + * 32 gpr, 32 fpr, nip, msr, link, ctr + * 32 bit (4 byte) registers: + * ccr, xer, fpscr */ -extern void kgdb_interruptible(int); /* control interrupts from serial */ -extern void putDebugChar(char); /* write a single character */ -extern char getDebugChar(void); /* read and return a single char */ - +#define NUMREGBYTES ((68 * 8) + (3 * 4)) +#define NUMCRITREGBYTES 184 +#else /* CONFIG_PPC32 */ +/* On non-E500 family PPC32 we determine the size by picking the last + * register we need, but on E500 we skip sections so we list what we + * need to store, and add it up. */ +#ifndef CONFIG_E500 +#define MAXREG (PT_FPSCR+1) +#else +/* 32 GPRs (8 bytes), nip, msr, ccr, link, ctr, xer, acc (8 bytes), spefscr*/ +#define MAXREG ((32*2)+6+2+1) +#endif +#define NUMREGBYTES (MAXREG * sizeof(int)) +/* CR/LR, R1, R2, R13-R31 inclusive. */ +#define NUMCRITREGBYTES (23 * sizeof(int)) +#endif /* 32/64 */ #endif /* !(__ASSEMBLY__) */ -#endif /* !(_PPC_KGDB_H) */ +#endif /* !__POWERPC_KGDB_H__ */ #endif /* __KERNEL__ */ diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb index a5d4b1d..2cfd272 100644 --- a/lib/Kconfig.kgdb +++ b/lib/Kconfig.kgdb @@ -1,7 +1,4 @@ -config HAVE_ARCH_KGDB_SHADOW_INFO - bool - config HAVE_ARCH_KGDB bool |
