diff options
| -rw-r--r-- | drivers/gpu/drm/msm/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/gpu/drm/msm/Makefile | 5 | ||||
| -rw-r--r-- | drivers/gpu/drm/msm/dsi/dsi.h | 3 | ||||
| -rw-r--r-- | drivers/gpu/drm/msm/dsi/dsi_host.c | 10 | ||||
| -rw-r--r-- | drivers/gpu/drm/msm/dsi/dsi_phy.c | 3 | ||||
| -rw-r--r-- | drivers/gpu/drm/msm/dsi/pll/dsi_pll.c | 164 | ||||
| -rw-r--r-- | drivers/gpu/drm/msm/dsi/pll/dsi_pll.h | 89 | ||||
| -rw-r--r-- | drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c | 652 |
8 files changed, 926 insertions, 7 deletions
diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig index 0a6f676..08ba8d0 100644 --- a/drivers/gpu/drm/msm/Kconfig +++ b/drivers/gpu/drm/msm/Kconfig @@ -46,3 +46,10 @@ config DRM_MSM_DSI Choose this option if you have a need for MIPI DSI connector support. +config DRM_MSM_DSI_PLL + bool "Enable DSI PLL driver in MSM DRM" + depends on DRM_MSM_DSI && COMMON_CLK + default y + help + Choose this option to enable DSI PLL driver which provides DSI + source clocks under common clock framework. diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile index ab20867..16a81b9 100644 --- a/drivers/gpu/drm/msm/Makefile +++ b/drivers/gpu/drm/msm/Makefile @@ -1,4 +1,5 @@ ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm +ccflags-$(CONFIG_DRM_MSM_DSI_PLL) += -Idrivers/gpu/drm/msm/dsi msm-y := \ adreno/adreno_device.o \ @@ -50,10 +51,14 @@ msm-y := \ msm-$(CONFIG_DRM_MSM_FBDEV) += msm_fbdev.o msm-$(CONFIG_COMMON_CLK) += mdp/mdp4/mdp4_lvds_pll.o + msm-$(CONFIG_DRM_MSM_DSI) += dsi/dsi.o \ dsi/dsi_host.o \ dsi/dsi_manager.o \ dsi/dsi_phy.o \ mdp/mdp5/mdp5_cmd_encoder.o +msm-$(CONFIG_DRM_MSM_DSI_PLL) += dsi/pll/dsi_pll.o \ + dsi/pll/dsi_pll_28nm.o + obj-$(CONFIG_DRM_MSM) += msm.o diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h index 10f54d4..321964a 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.h +++ b/drivers/gpu/drm/msm/dsi/dsi.h @@ -103,7 +103,8 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi); struct msm_dsi_phy; enum msm_dsi_phy_type { MSM_DSI_PHY_UNKNOWN, - MSM_DSI_PHY_28NM, + MSM_DSI_PHY_28NM_HPM, + MSM_DSI_PHY_28NM_LP, MSM_DSI_PHY_MAX }; struct msm_dsi_phy *msm_dsi_phy_init(struct platform_device *pdev, diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 517e070..8a246cf 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -64,7 +64,7 @@ static const struct dsi_config dsi_cfgs[] = { .major = MSM_DSI_VER_MAJOR_6G, .minor = MSM_DSI_6G_VER_MINOR_V1_0, .io_offset = DSI_6G_REG_SHIFT, - .phy_type = MSM_DSI_PHY_28NM, + .phy_type = MSM_DSI_PHY_28NM_HPM, .reg_cfg = { .num = 4, .regs = { @@ -79,7 +79,7 @@ static const struct dsi_config dsi_cfgs[] = { .major = MSM_DSI_VER_MAJOR_6G, .minor = MSM_DSI_6G_VER_MINOR_V1_1, .io_offset = DSI_6G_REG_SHIFT, - .phy_type = MSM_DSI_PHY_28NM, + .phy_type = MSM_DSI_PHY_28NM_HPM, .reg_cfg = { .num = 4, .regs = { @@ -94,7 +94,7 @@ static const struct dsi_config dsi_cfgs[] = { .major = MSM_DSI_VER_MAJOR_6G, .minor = MSM_DSI_6G_VER_MINOR_V1_1_1, .io_offset = DSI_6G_REG_SHIFT, - .phy_type = MSM_DSI_PHY_28NM, + .phy_type = MSM_DSI_PHY_28NM_HPM, .reg_cfg = { .num = 4, .regs = { @@ -109,7 +109,7 @@ static const struct dsi_config dsi_cfgs[] = { .major = MSM_DSI_VER_MAJOR_6G, .minor = MSM_DSI_6G_VER_MINOR_V1_2, .io_offset = DSI_6G_REG_SHIFT, - .phy_type = MSM_DSI_PHY_28NM, + .phy_type = MSM_DSI_PHY_28NM_HPM, .reg_cfg = { .num = 4, .regs = { @@ -124,7 +124,7 @@ static const struct dsi_config dsi_cfgs[] = { .major = MSM_DSI_VER_MAJOR_6G, .minor = MSM_DSI_6G_VER_MINOR_V1_3_1, .io_offset = DSI_6G_REG_SHIFT, - .phy_type = MSM_DSI_PHY_28NM, + .phy_type = MSM_DSI_PHY_28NM_LP, .reg_cfg = { .num = 4, .regs = { diff --git a/drivers/gpu/drm/msm/dsi/dsi_phy.c b/drivers/gpu/drm/msm/dsi/dsi_phy.c index 61af193..4403f38 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_phy.c +++ b/drivers/gpu/drm/msm/dsi/dsi_phy.c @@ -311,7 +311,8 @@ struct msm_dsi_phy *msm_dsi_phy_init(struct platform_device *pdev, } switch (type) { - case MSM_DSI_PHY_28NM: + case MSM_DSI_PHY_28NM_HPM: + case MSM_DSI_PHY_28NM_LP: dsi_phy_func_init(28nm); break; default: diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c new file mode 100644 index 0000000..509376f --- /dev/null +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c @@ -0,0 +1,164 @@ +/* + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "dsi_pll.h" + +static int dsi_pll_enable(struct msm_dsi_pll *pll) +{ + int i, ret = 0; + + /* + * Certain PLLs do not allow VCO rate update when it is on. + * Keep track of their status to turn on/off after set rate success. + */ + if (unlikely(pll->pll_on)) + return 0; + + /* Try all enable sequences until one succeeds */ + for (i = 0; i < pll->en_seq_cnt; i++) { + ret = pll->enable_seqs[i](pll); + DBG("DSI PLL %s after sequence #%d", + ret ? "unlocked" : "locked", i + 1); + if (!ret) + break; + } + + if (ret) { + DRM_ERROR("DSI PLL failed to lock\n"); + return ret; + } + + pll->pll_on = true; + + return 0; +} + +static void dsi_pll_disable(struct msm_dsi_pll *pll) +{ + if (unlikely(!pll->pll_on)) + return; + + pll->disable_seq(pll); + + pll->pll_on = false; +} + +/* + * DSI PLL Helper functions + */ +long msm_dsi_pll_helper_clk_round_rate(struct clk_hw *hw, + unsigned long rate, unsigned long *parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + + if (rate < pll->min_rate) + return pll->min_rate; + else if (rate > pll->max_rate) + return pll->max_rate; + else + return rate; +} + +int msm_dsi_pll_helper_clk_prepare(struct clk_hw *hw) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + int ret; + + /* + * Certain PLLs need to update the same VCO rate and registers + * after resume in suspend/resume scenario. + */ + if (pll->restore_state) { + ret = pll->restore_state(pll); + if (ret) + goto error; + } + + ret = dsi_pll_enable(pll); + +error: + return ret; +} + +void msm_dsi_pll_helper_clk_unprepare(struct clk_hw *hw) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + + if (pll->save_state) + pll->save_state(pll); + + dsi_pll_disable(pll); +} + +void msm_dsi_pll_helper_unregister_clks(struct platform_device *pdev, + struct clk **clks, u32 num_clks) +{ + of_clk_del_provider(pdev->dev.of_node); + + if (!num_clks || !clks) + return; + + do { + clk_unregister(clks[--num_clks]); + clks[num_clks] = NULL; + } while (num_clks); +} + +/* + * DSI PLL API + */ +int msm_dsi_pll_get_clk_provider(struct msm_dsi_pll *pll, + struct clk **byte_clk_provider, struct clk **pixel_clk_provider) +{ + if (pll->get_provider) + return pll->get_provider(pll, + byte_clk_provider, + pixel_clk_provider); + + return -EINVAL; +} + +void msm_dsi_pll_destroy(struct msm_dsi_pll *pll) +{ + if (pll->destroy) + pll->destroy(pll); +} + +struct msm_dsi_pll *msm_dsi_pll_init(struct platform_device *pdev, + enum msm_dsi_phy_type type, int id) +{ + struct device *dev = &pdev->dev; + struct msm_dsi_pll *pll; + + switch (type) { + case MSM_DSI_PHY_28NM_HPM: + case MSM_DSI_PHY_28NM_LP: + pll = msm_dsi_pll_28nm_init(pdev, type, id); + break; + default: + pll = ERR_PTR(-ENXIO); + break; + } + + if (IS_ERR(pll)) { + dev_err(dev, "%s: failed to init DSI PLL\n", __func__); + return NULL; + } + + pll->type = type; + + DBG("DSI:%d PLL registered", id); + + return pll; +} + diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h new file mode 100644 index 0000000..5a3bb24 --- /dev/null +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h @@ -0,0 +1,89 @@ +/* + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DSI_PLL_H__ +#define __DSI_PLL_H__ + +#include <linux/clk.h> +#include <linux/clk-provider.h> + +#include "dsi.h" + +#define NUM_DSI_CLOCKS_MAX 6 +#define MAX_DSI_PLL_EN_SEQS 10 + +struct msm_dsi_pll { + enum msm_dsi_phy_type type; + + struct clk_hw clk_hw; + bool pll_on; + + unsigned long min_rate; + unsigned long max_rate; + u32 en_seq_cnt; + + int (*enable_seqs[MAX_DSI_PLL_EN_SEQS])(struct msm_dsi_pll *pll); + void (*disable_seq)(struct msm_dsi_pll *pll); + int (*get_provider)(struct msm_dsi_pll *pll, + struct clk **byte_clk_provider, + struct clk **pixel_clk_provider); + void (*destroy)(struct msm_dsi_pll *pll); + void (*save_state)(struct msm_dsi_pll *pll); + int (*restore_state)(struct msm_dsi_pll *pll); +}; + +#define hw_clk_to_pll(x) container_of(x, struct msm_dsi_pll, clk_hw) + +static inline void pll_write(void __iomem *reg, u32 data) +{ + msm_writel(data, reg); +} + +static inline u32 pll_read(const void __iomem *reg) +{ + return msm_readl(reg); +} + +static inline void pll_write_udelay(void __iomem *reg, u32 data, u32 delay_us) +{ + pll_write(reg, data); + udelay(delay_us); +} + +static inline void pll_write_ndelay(void __iomem *reg, u32 data, u32 delay_ns) +{ + pll_write((reg), data); + ndelay(delay_ns); +} + +/* + * DSI PLL Helper functions + */ + +/* clock callbacks */ +long msm_dsi_pll_helper_clk_round_rate(struct clk_hw *hw, + unsigned long rate, unsigned long *parent_rate); +int msm_dsi_pll_helper_clk_prepare(struct clk_hw *hw); +void msm_dsi_pll_helper_clk_unprepare(struct clk_hw *hw); +/* misc */ +void msm_dsi_pll_helper_unregister_clks(struct platform_device *pdev, + struct clk **clks, u32 num_clks); + +/* + * Initialization for Each PLL Type + */ +struct msm_dsi_pll *msm_dsi_pll_28nm_init(struct platform_device *pdev, + enum msm_dsi_phy_type type, int id); + +#endif /* __DSI_PLL_H__ */ + diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c new file mode 100644 index 0000000..eb8ac30 --- /dev/null +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c @@ -0,0 +1,652 @@ +/* + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> + +#include "dsi_pll.h" +#include "dsi.xml.h" + +/* + * DSI PLL 28nm - clock diagram (eg: DSI0): + * + * dsi0analog_postdiv_clk + * | dsi0indirect_path_div2_clk + * | | + * +------+ | +----+ | |\ dsi0byte_mux + * dsi0vco_clk --o--| DIV1 |--o--| /2 |--o--| \ | + * | +------+ +----+ | m| | +----+ + * | | u|--o--| /4 |-- dsi0pllbyte + * | | x| +----+ + * o--------------------------| / + * | |/ + * | +------+ + * o----------| DIV3 |------------------------- dsi0pll + * +------+ + */ + +#define POLL_MAX_READS 10 +#define POLL_TIMEOUT_US 50 + +#define NUM_PROVIDED_CLKS 2 + +#define VCO_REF_CLK_RATE 19200000 +#define VCO_MIN_RATE 350000000 +#define VCO_MAX_RATE 750000000 + +#define DSI_BYTE_PLL_CLK 0 +#define DSI_PIXEL_PLL_CLK 1 + +#define LPFR_LUT_SIZE 10 +struct lpfr_cfg { + unsigned long vco_rate; + u32 resistance; +}; + +/* Loop filter resistance: */ +static const struct lpfr_cfg lpfr_lut[LPFR_LUT_SIZE] = { + { 479500000, 8 }, + { 480000000, 11 }, + { 575500000, 8 }, + { 576000000, 12 }, + { 610500000, 8 }, + { 659500000, 9 }, + { 671500000, 10 }, + { 672000000, 14 }, + { 708500000, 10 }, + { 750000000, 11 }, +}; + +struct pll_28nm_cached_state { + unsigned long vco_rate; + u8 postdiv3; + u8 postdiv1; + u8 byte_mux; +}; + +struct dsi_pll_28nm { + struct msm_dsi_pll base; + + int id; + struct platform_device *pdev; + void __iomem *mmio; + + int vco_delay; + + /* private clocks: */ + struct clk *clks[NUM_DSI_CLOCKS_MAX]; + u32 num_clks; + + /* clock-provider: */ + struct clk *provided_clks[NUM_PROVIDED_CLKS]; + struct clk_onecell_data clk_data; + + struct pll_28nm_cached_state cached_state; +}; + +#define to_pll_28nm(x) container_of(x, struct dsi_pll_28nm, base) + +static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm, + u32 nb_tries, u32 timeout_us) +{ + bool pll_locked = false; + u32 val; + + while (nb_tries--) { + val = pll_read(pll_28nm->mmio + REG_DSI_28nm_PHY_PLL_STATUS); + pll_locked = !!(val & DSI_28nm_PHY_PLL_STATUS_PLL_RDY); + + if (pll_locked) + break; + + udelay(timeout_us); + } + DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); + + return pll_locked; +} + +static void pll_28nm_software_reset(struct dsi_pll_28nm *pll_28nm) +{ + void __iomem *base = pll_28nm->mmio; + + /* + * Add HW recommended delays after toggling the software + * reset bit off and back on. + */ + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_TEST_CFG, + DSI_28nm_PHY_PLL_TEST_CFG_PLL_SW_RESET, 1); + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_TEST_CFG, 0x00, 1); +} + +/* + * Clock Callbacks + */ +static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + struct device *dev = &pll_28nm->pdev->dev; + void __iomem *base = pll_28nm->mmio; + unsigned long div_fbx1000, gen_vco_clk; + u32 refclk_cfg, frac_n_mode, frac_n_value; + u32 sdm_cfg0, sdm_cfg1, sdm_cfg2, sdm_cfg3; + u32 cal_cfg10, cal_cfg11; + u32 rem; + int i; + + VERB("rate=%lu, parent's=%lu", rate, parent_rate); + + /* Force postdiv2 to be div-4 */ + pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV2_CFG, 3); + + /* Configure the Loop filter resistance */ + for (i = 0; i < LPFR_LUT_SIZE; i++) + if (rate <= lpfr_lut[i].vco_rate) + break; + if (i == LPFR_LUT_SIZE) { + dev_err(dev, "unable to get loop filter resistance. vco=%lu\n", + rate); + return -EINVAL; + } + pll_write(base + REG_DSI_28nm_PHY_PLL_LPFR_CFG, lpfr_lut[i].resistance); + + /* Loop filter capacitance values : c1 and c2 */ + pll_write(base + REG_DSI_28nm_PHY_PLL_LPFC1_CFG, 0x70); + pll_write(base + REG_DSI_28nm_PHY_PLL_LPFC2_CFG, 0x15); + + rem = rate % VCO_REF_CLK_RATE; + if (rem) { + refclk_cfg = DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR; + frac_n_mode = 1; + div_fbx1000 = rate / (VCO_REF_CLK_RATE / 500); + gen_vco_clk = div_fbx1000 * (VCO_REF_CLK_RATE / 500); + } else { + refclk_cfg = 0x0; + frac_n_mode = 0; + div_fbx1000 = rate / (VCO_REF_CLK_RATE / 1000); + gen_vco_clk = div_fbx1000 * (VCO_REF_CLK_RATE / 1000); + } + + DBG("refclk_cfg = %d", refclk_cfg); + + rem = div_fbx1000 % 1000; + frac_n_value = (rem << 16) / 1000; + + DBG("div_fb = %lu", div_fbx1000); + DBG("frac_n_value = %d", frac_n_value); + + DBG("Generated VCO Clock: %lu", gen_vco_clk); + rem = 0; + sdm_cfg1 = pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1); + sdm_cfg1 &= ~DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET__MASK; + if (frac_n_mode) { + sdm_cfg0 = 0x0; + sdm_cfg0 |= DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV(0); + sdm_cfg1 |= DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET( + (u32)(((div_fbx1000 / 1000) & 0x3f) - 1)); + sdm_cfg3 = frac_n_value >> 8; + sdm_cfg2 = frac_n_value & 0xff; + } else { + sdm_cfg0 = DSI_28nm_PHY_PLL_SDM_CFG0_BYP; + sdm_cfg0 |= DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV( + (u32)(((div_fbx1000 / 1000) & 0x3f) - 1)); + sdm_cfg1 |= DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET(0); + sdm_cfg2 = 0; + sdm_cfg3 = 0; + } + + DBG("sdm_cfg0=%d", sdm_cfg0); + DBG("sdm_cfg1=%d", sdm_cfg1); + DBG("sdm_cfg2=%d", sdm_cfg2); + DBG("sdm_cfg3=%d", sdm_cfg3); + + cal_cfg11 = (u32)(gen_vco_clk / (256 * 1000000)); + cal_cfg10 = (u32)((gen_vco_clk % (256 * 1000000)) / 1000000); + DBG("cal_cfg10=%d, cal_cfg11=%d", cal_cfg10, cal_cfg11); + + pll_write(base + REG_DSI_28nm_PHY_PLL_CHGPUMP_CFG, 0x02); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG3, 0x2b); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG4, 0x06); + pll_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d); + + pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1, sdm_cfg1); + pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG2, + DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0(sdm_cfg2)); + pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG3, + DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8(sdm_cfg3)); + pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG4, 0x00); + + /* Add hardware recommended delay for correct PLL configuration */ + if (pll_28nm->vco_delay) + udelay(pll_28nm->vco_delay); + + pll_write(base + REG_DSI_28nm_PHY_PLL_REFCLK_CFG, refclk_cfg); + pll_write(base + REG_DSI_28nm_PHY_PLL_PWRGEN_CFG, 0x00); + pll_write(base + REG_DSI_28nm_PHY_PLL_VCOLPF_CFG, 0x31); + pll_write(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0, sdm_cfg0); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG0, 0x12); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG6, 0x30); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG7, 0x00); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG8, 0x60); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG9, 0x00); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG10, cal_cfg10 & 0xff); + pll_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG11, cal_cfg11 & 0xff); + pll_write(base + REG_DSI_28nm_PHY_PLL_EFUSE_CFG, 0x20); + + return 0; +} + +static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + + return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS, + POLL_TIMEOUT_US); +} + +static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + void __iomem *base = pll_28nm->mmio; + u32 sdm0, doubler, sdm_byp_div; + u32 sdm_dc_off, sdm_freq_seed, sdm2, sdm3; + u32 ref_clk = VCO_REF_CLK_RATE; + unsigned long vco_rate; + + VERB("parent_rate=%lu", parent_rate); + + /* Check to see if the ref clk doubler is enabled */ + doubler = pll_read(base + REG_DSI_28nm_PHY_PLL_REFCLK_CFG) & + DSI_28nm_PHY_PLL_REFCLK_CFG_DBLR; + ref_clk += (doubler * VCO_REF_CLK_RATE); + + /* see if it is integer mode or sdm mode */ + sdm0 = pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0); + if (sdm0 & DSI_28nm_PHY_PLL_SDM_CFG0_BYP) { + /* integer mode */ + sdm_byp_div = FIELD( + pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG0), + DSI_28nm_PHY_PLL_SDM_CFG0_BYP_DIV) + 1; + vco_rate = ref_clk * sdm_byp_div; + } else { + /* sdm mode */ + sdm_dc_off = FIELD( + pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG1), + DSI_28nm_PHY_PLL_SDM_CFG1_DC_OFFSET); + DBG("sdm_dc_off = %d", sdm_dc_off); + sdm2 = FIELD(pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG2), + DSI_28nm_PHY_PLL_SDM_CFG2_FREQ_SEED_7_0); + sdm3 = FIELD(pll_read(base + REG_DSI_28nm_PHY_PLL_SDM_CFG3), + DSI_28nm_PHY_PLL_SDM_CFG3_FREQ_SEED_15_8); + sdm_freq_seed = (sdm3 << 8) | sdm2; + DBG("sdm_freq_seed = %d", sdm_freq_seed); + + vco_rate = (ref_clk * (sdm_dc_off + 1)) + + mult_frac(ref_clk, sdm_freq_seed, BIT(16)); + DBG("vco rate = %lu", vco_rate); + } + + DBG("returning vco rate = %lu", vco_rate); + + return vco_rate; +} + +static const struct clk_ops clk_ops_dsi_pll_28nm_vco = { + .round_rate = msm_dsi_pll_helper_clk_round_rate, + .set_rate = dsi_pll_28nm_clk_set_rate, + .recalc_rate = dsi_pll_28nm_clk_recalc_rate, + .prepare = msm_dsi_pll_helper_clk_prepare, + .unprepare = msm_dsi_pll_helper_clk_unprepare, + .is_enabled = dsi_pll_28nm_clk_is_enabled, +}; + +/* + * PLL Callbacks + */ +static int dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + struct device *dev = &pll_28nm->pdev->dev; + void __iomem *base = pll_28nm->mmio; + u32 max_reads = 5, timeout_us = 100; + bool locked; + u32 val; + int i; + + DBG("id=%d", pll_28nm->id); + + pll_28nm_software_reset(pll_28nm); + + /* + * PLL power up sequence. + * Add necessary delays recommended by hardware. + */ + val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 1); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600); + + for (i = 0; i < 2; i++) { + /* DSI Uniphy lock detect setting */ + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, + 0x0c, 100); + pll_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d); + + /* poll for PLL ready status */ + locked = pll_28nm_poll_for_ready(pll_28nm, + max_reads, timeout_us); + if (locked) + break; + + pll_28nm_software_reset(pll_28nm); + + /* + * PLL power up sequence. + * Add necessary delays recommended by hardware. + */ + val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 1); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 250); + + val &= ~DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE; + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600); + } + + if (unlikely(!locked)) + dev_err(dev, "DSI PLL lock failed\n"); + else + DBG("DSI PLL Lock success"); + + return locked ? 0 : -EINVAL; +} + +static int dsi_pll_28nm_enable_seq_lp(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + struct device *dev = &pll_28nm->pdev->dev; + void __iomem *base = pll_28nm->mmio; + bool locked; + u32 max_reads = 10, timeout_us = 50; + u32 val; + + DBG("id=%d", pll_28nm->id); + + pll_28nm_software_reset(pll_28nm); + + /* + * PLL power up sequence. + * Add necessary delays recommended by hardware. + */ + pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_CAL_CFG1, 0x34, 500); + + val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B; + pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B; + pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B | + DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE; + pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 500); + + /* DSI PLL toggle lock detect setting */ + pll_write_ndelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x04, 500); + pll_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x05, 512); + + locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us); + + if (unlikely(!locked)) + dev_err(dev, "DSI PLL lock failed\n"); + else + DBG("DSI PLL lock success"); + + return locked ? 0 : -EINVAL; +} + +static void dsi_pll_28nm_disable_seq(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + + DBG("id=%d", pll_28nm->id); + pll_write(pll_28nm->mmio + REG_DSI_28nm_PHY_PLL_GLB_CFG, 0x00); +} + +static void dsi_pll_28nm_save_state(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state; + void __iomem *base = pll_28nm->mmio; + + cached_state->postdiv3 = + pll_read(base + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG); + cached_state->postdiv1 = + pll_read(base + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG); + cached_state->byte_mux = pll_read(base + REG_DSI_28nm_PHY_PLL_VREG_CFG); + cached_state->vco_rate = __clk_get_rate(pll->clk_hw.clk); +} + +static int dsi_pll_28nm_restore_state(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state; + void __iomem *base = pll_28nm->mmio; + int ret; + + if ((cached_state->vco_rate != 0) && + (cached_state->vco_rate == __clk_get_rate(pll->clk_hw.clk))) { + ret = dsi_pll_28nm_clk_set_rate(&pll->clk_hw, + cached_state->vco_rate, 0); + if (ret) { + dev_err(&pll_28nm->pdev->dev, + "restore vco rate failed. ret=%d\n", ret); + return ret; + } + + pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG, + cached_state->postdiv3); + pll_write(base + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG, + cached_state->postdiv1); + pll_write(base + REG_DSI_28nm_PHY_PLL_VREG_CFG, + cached_state->byte_mux); + + cached_state->vco_rate = 0; + } + + return 0; +} + +static int dsi_pll_28nm_get_provider(struct msm_dsi_pll *pll, + struct clk **byte_clk_provider, + struct clk **pixel_clk_provider) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + + if (byte_clk_provider) + *byte_clk_provider = pll_28nm->provided_clks[DSI_BYTE_PLL_CLK]; + if (pixel_clk_provider) + *pixel_clk_provider = + pll_28nm->provided_clks[DSI_PIXEL_PLL_CLK]; + + return 0; +} + +static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + int i; + + msm_dsi_pll_helper_unregister_clks(pll_28nm->pdev, + pll_28nm->clks, pll_28nm->num_clks); + + for (i = 0; i < NUM_PROVIDED_CLKS; i++) + pll_28nm->provided_clks[i] = NULL; + + pll_28nm->num_clks = 0; + pll_28nm->clk_data.clks = NULL; + pll_28nm->clk_data.clk_num = 0; +} + +static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm) +{ + char clk_name[32], parent1[32], parent2[32], vco_name[32]; + struct clk_init_data vco_init = { + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .name = vco_name, + .ops = &clk_ops_dsi_pll_28nm_vco, + }; + struct device *dev = &pll_28nm->pdev->dev; + struct clk **clks = pll_28nm->clks; + struct clk **provided_clks = pll_28nm->provided_clks; + int num = 0; + int ret; + + DBG("%d", pll_28nm->id); + + snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->id); + pll_28nm->base.clk_hw.init = &vco_init; + clks[num++] = clk_register(dev, &pll_28nm->base.clk_hw); + + snprintf(clk_name, 32, "dsi%danalog_postdiv_clk", pll_28nm->id); + snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id); + clks[num++] = clk_register_divider(dev, clk_name, + parent1, CLK_SET_RATE_PARENT, + pll_28nm->mmio + + REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG, + 0, 4, 0, NULL); + + snprintf(clk_name, 32, "dsi%dindirect_path_div2_clk", pll_28nm->id); + snprintf(parent1, 32, "dsi%danalog_postdiv_clk", pll_28nm->id); + clks[num++] = clk_register_fixed_factor(dev, clk_name, + parent1, CLK_SET_RATE_PARENT, + 1, 2); + + snprintf(clk_name, 32, "dsi%dpll", pll_28nm->id); + snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id); + clks[num++] = provided_clks[DSI_PIXEL_PLL_CLK] = + clk_register_divider(dev, clk_name, + parent1, 0, pll_28nm->mmio + + REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG, + 0, 8, 0, NULL); + + snprintf(clk_name, 32, "dsi%dbyte_mux", pll_28nm->id); + snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->id); + snprintf(parent2, 32, "dsi%dindirect_path_div2_clk", pll_28nm->id); + clks[num++] = clk_register_mux(dev, clk_name, + (const char *[]){ + parent1, parent2 + }, 2, CLK_SET_RATE_PARENT, pll_28nm->mmio + + REG_DSI_28nm_PHY_PLL_VREG_CFG, 1, 1, 0, NULL); + + snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id); + snprintf(parent1, 32, "dsi%dbyte_mux", pll_28nm->id); + clks[num++] = provided_clks[DSI_BYTE_PLL_CLK] = + clk_register_fixed_factor(dev, clk_name, + parent1, CLK_SET_RATE_PARENT, 1, 4); + + pll_28nm->num_clks = num; + + pll_28nm->clk_data.clk_num = NUM_PROVIDED_CLKS; + pll_28nm->clk_data.clks = provided_clks; + + ret = of_clk_add_provider(dev->of_node, + of_clk_src_onecell_get, &pll_28nm->clk_data); + if (ret) { + dev_err(dev, "failed to register clk provider: %d\n", ret); + return ret; + } + + return 0; +} + +struct msm_dsi_pll *msm_dsi_pll_28nm_init(struct platform_device *pdev, + enum msm_dsi_phy_type type, int id) +{ + struct dsi_pll_28nm *pll_28nm; + struct msm_dsi_pll *pll; + int ret; + + if (!pdev) + return ERR_PTR(-ENODEV); + + pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL); + if (!pll_28nm) + return ERR_PTR(-ENOMEM); + + pll_28nm->pdev = pdev; + pll_28nm->id = id; + + pll_28nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL"); + if (IS_ERR_OR_NULL(pll_28nm->mmio)) { + dev_err(&pdev->dev, "%s: failed to map pll base\n", __func__); + return ERR_PTR(-ENOMEM); + } + + pll = &pll_28nm->base; + pll->min_rate = VCO_MIN_RATE; + pll->max_rate = VCO_MAX_RATE; + pll->get_provider = dsi_pll_28nm_get_provider; + pll->destroy = dsi_pll_28nm_destroy; + pll->disable_seq = dsi_pll_28nm_disable_seq; + pll->save_state = dsi_pll_28nm_save_state; + pll->restore_state = dsi_pll_28nm_restore_state; + + if (type == MSM_DSI_PHY_28NM_HPM) { + pll_28nm->vco_delay = 1; + + pll->en_seq_cnt = 3; + pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_hpm; + pll->enable_seqs[1] = dsi_pll_28nm_enable_seq_hpm; + pll->enable_seqs[2] = dsi_pll_28nm_enable_seq_hpm; + } else if (type == MSM_DSI_PHY_28NM_LP) { + pll_28nm->vco_delay = 1000; + + pll->en_seq_cnt = 1; + pll->enable_seqs[0] = dsi_pll_28nm_enable_seq_lp; + } else { + dev_err(&pdev->dev, "phy type (%d) is not 28nm\n", type); + return ERR_PTR(-EINVAL); + } + + ret = pll_28nm_register(pll_28nm); + if (ret) { + dev_err(&pdev->dev, "failed to register PLL: %d\n", ret); + return ERR_PTR(ret); + } + + return pll; +} + |
