diff options
-rw-r--r-- | Documentation/devicetree/bindings/mfd/s2mps11.txt | 22 | ||||
-rw-r--r-- | drivers/clk/clk-s2mps11.c | 24 | ||||
-rw-r--r-- | drivers/mfd/sec-core.c | 29 | ||||
-rw-r--r-- | drivers/mfd/sec-irq.c | 23 | ||||
-rw-r--r-- | drivers/regulator/Kconfig | 10 | ||||
-rw-r--r-- | drivers/regulator/s2mps11.c | 102 | ||||
-rw-r--r-- | include/linux/mfd/samsung/core.h | 2 | ||||
-rw-r--r-- | include/linux/mfd/samsung/s2mps13.h | 186 |
8 files changed, 374 insertions, 24 deletions
diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index 0e4026a..57a0450 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -1,5 +1,5 @@ -* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator +* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator The Samsung S2MPS11 is a multi-function device which includes voltage and current regulators, RTC, charger controller and other sub-blocks. It is @@ -7,8 +7,8 @@ interfaced to the host controller using an I2C interface. Each sub-block is addressed by the host system using different I2C slave addresses. Required properties: -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic" - or "samsung,s2mpu02-pmic". +- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic" + or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic". - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. Optional properties: @@ -17,8 +17,8 @@ Optional properties: - interrupts: Interrupt specifiers for interrupt sources. Optional nodes: -- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz - outputs, so to register these as clocks with common clock framework +- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768 + KHz outputs, so to register these as clocks with common clock framework instantiate a sub-node named "clocks". It uses the common clock binding documented in : [Documentation/devicetree/bindings/clock/clock-bindings.txt] @@ -30,12 +30,12 @@ Optional nodes: the clock which they consume. Clock ID Devices ---------------------------------------------------------- - 32KhzAP 0 S2MPS11, S2MPS14, S5M8767 - 32KhzCP 1 S2MPS11, S5M8767 - 32KhzBT 2 S2MPS11, S2MPS14, S5M8767 + 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S5M8767 + 32KhzCP 1 S2MPS11, S2MPS13, S5M8767 + 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S5M8767 - - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk", - "samsung,s5m8767-clk" + - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk", + "samsung,s2mps14-clk", "samsung,s5m8767-clk" - regulators: The regulators of s2mps11 that have to be instantiated should be included in a sub-node named 'regulators'. Regulator nodes included in this @@ -81,12 +81,14 @@ as per the datasheet of s2mps11. - LDOn - valid values for n are: - S2MPS11: 1 to 38 + - S2MPS13: 1 to 40 - S2MPS14: 1 to 25 - S2MPU02: 1 to 28 - Example: LDO1, LDO2, LDO28 - BUCKn - valid values for n are: - S2MPS11: 1 to 10 + - S2MPS13: 1 to 10 - S2MPS14: 1 to 5 - S2MPU02: 1 to 7 - Example: BUCK1, BUCK2, BUCK9 diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c index f16ab25e..4f98898 100644 --- a/drivers/clk/clk-s2mps11.c +++ b/drivers/clk/clk-s2mps11.c @@ -23,6 +23,7 @@ #include <linux/clk-provider.h> #include <linux/platform_device.h> #include <linux/mfd/samsung/s2mps11.h> +#include <linux/mfd/samsung/s2mps13.h> #include <linux/mfd/samsung/s2mps14.h> #include <linux/mfd/samsung/s5m8767.h> #include <linux/mfd/samsung/core.h> @@ -120,6 +121,24 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = { }, }; +static struct clk_init_data s2mps13_clks_init[S2MPS11_CLKS_NUM] = { + [S2MPS11_CLK_AP] = { + .name = "s2mps13_ap", + .ops = &s2mps11_clk_ops, + .flags = CLK_IS_ROOT, + }, + [S2MPS11_CLK_CP] = { + .name = "s2mps13_cp", + .ops = &s2mps11_clk_ops, + .flags = CLK_IS_ROOT, + }, + [S2MPS11_CLK_BT] = { + .name = "s2mps13_bt", + .ops = &s2mps11_clk_ops, + .flags = CLK_IS_ROOT, + }, +}; + static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = { [S2MPS11_CLK_AP] = { .name = "s2mps14_ap", @@ -184,6 +203,10 @@ static int s2mps11_clk_probe(struct platform_device *pdev) s2mps11_reg = S2MPS11_REG_RTC_CTRL; clks_init = s2mps11_clks_init; break; + case S2MPS13X: + s2mps11_reg = S2MPS13_REG_RTCCTRL; + clks_init = s2mps13_clks_init; + break; case S2MPS14X: s2mps11_reg = S2MPS14_REG_RTCCTRL; clks_init = s2mps14_clks_init; @@ -279,6 +302,7 @@ static int s2mps11_clk_remove(struct platform_device *pdev) static const struct platform_device_id s2mps11_clk_id[] = { { "s2mps11-clk", S2MPS11X}, + { "s2mps13-clk", S2MPS13X}, { "s2mps14-clk", S2MPS14X}, { "s5m8767-clk", S5M8767X}, { }, diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index dba7e2b..b399605 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -27,6 +27,7 @@ #include <linux/mfd/samsung/irq.h> #include <linux/mfd/samsung/s2mpa01.h> #include <linux/mfd/samsung/s2mps11.h> +#include <linux/mfd/samsung/s2mps13.h> #include <linux/mfd/samsung/s2mps14.h> #include <linux/mfd/samsung/s2mpu02.h> #include <linux/mfd/samsung/s5m8763.h> @@ -74,6 +75,15 @@ static const struct mfd_cell s2mps11_devs[] = { } }; +static const struct mfd_cell s2mps13_devs[] = { + { .name = "s2mps13-pmic", }, + { .name = "s2mps13-rtc", }, + { + .name = "s2mps13-clk", + .of_compatible = "samsung,s2mps13-clk", + }, +}; + static const struct mfd_cell s2mps14_devs[] = { { .name = "s2mps14-pmic", @@ -108,6 +118,9 @@ static const struct of_device_id sec_dt_match[] = { .compatible = "samsung,s2mps11-pmic", .data = (void *)S2MPS11X, }, { + .compatible = "samsung,s2mps13-pmic", + .data = (void *)S2MPS13X, + }, { .compatible = "samsung,s2mps14-pmic", .data = (void *)S2MPS14X, }, { @@ -194,6 +207,15 @@ static const struct regmap_config s2mps11_regmap_config = { .cache_type = REGCACHE_FLAT, }; +static const struct regmap_config s2mps13_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = S2MPS13_REG_LDODSCH5, + .volatile_reg = s2mps11_volatile, + .cache_type = REGCACHE_FLAT, +}; + static const struct regmap_config s2mps14_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -325,6 +347,9 @@ static int sec_pmic_probe(struct i2c_client *i2c, case S2MPS11X: regmap = &s2mps11_regmap_config; break; + case S2MPS13X: + regmap = &s2mps13_regmap_config; + break; case S2MPS14X: regmap = &s2mps14_regmap_config; break; @@ -378,6 +403,10 @@ static int sec_pmic_probe(struct i2c_client *i2c, sec_devs = s2mps11_devs; num_sec_devs = ARRAY_SIZE(s2mps11_devs); break; + case S2MPS13X: + sec_devs = s2mps13_devs; + num_sec_devs = ARRAY_SIZE(s2mps13_devs); + break; case S2MPS14X: sec_devs = s2mps14_devs; num_sec_devs = ARRAY_SIZE(s2mps14_devs); diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c index f9a5786..ba86a91 100644 --- a/drivers/mfd/sec-irq.c +++ b/drivers/mfd/sec-irq.c @@ -389,14 +389,22 @@ static const struct regmap_irq_chip s2mps11_irq_chip = { .ack_base = S2MPS11_REG_INT1, }; +#define S2MPS1X_IRQ_CHIP_COMMON_DATA \ + .irqs = s2mps14_irqs, \ + .num_irqs = ARRAY_SIZE(s2mps14_irqs), \ + .num_regs = 3, \ + .status_base = S2MPS14_REG_INT1, \ + .mask_base = S2MPS14_REG_INT1M, \ + .ack_base = S2MPS14_REG_INT1 \ + +static const struct regmap_irq_chip s2mps13_irq_chip = { + .name = "s2mps13", + S2MPS1X_IRQ_CHIP_COMMON_DATA, +}; + static const struct regmap_irq_chip s2mps14_irq_chip = { .name = "s2mps14", - .irqs = s2mps14_irqs, - .num_irqs = ARRAY_SIZE(s2mps14_irqs), - .num_regs = 3, - .status_base = S2MPS14_REG_INT1, - .mask_base = S2MPS14_REG_INT1M, - .ack_base = S2MPS14_REG_INT1, + S2MPS1X_IRQ_CHIP_COMMON_DATA, }; static const struct regmap_irq_chip s2mpu02_irq_chip = { @@ -452,6 +460,9 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic) case S2MPS11X: sec_irq_chip = &s2mps11_irq_chip; break; + case S2MPS13X: + sec_irq_chip = &s2mps13_irq_chip; + break; case S2MPS14X: sec_irq_chip = &s2mps14_irq_chip; break; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 55d7b7b..5e06134 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -529,13 +529,13 @@ config REGULATOR_S2MPA01 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. config REGULATOR_S2MPS11 - tristate "Samsung S2MPS11/S2MPS14/S2MPU02 voltage regulator" + tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator" depends on MFD_SEC_CORE help - This driver supports a Samsung S2MPS11/S2MPS14/S2MPU02 voltage output - regulator via I2C bus. The chip is comprised of high efficient Buck - converters including Dual-Phase Buck converter, Buck-Boost converter, - various LDOs. + This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage + output regulator via I2C bus. The chip is comprised of high efficient + Buck converters including Dual-Phase Buck converter, Buck-Boost + converter, various LDOs. config REGULATOR_S5M8767 tristate "Samsung S5M8767A voltage regulator" diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index adab82d..738dc77 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -30,6 +30,7 @@ #include <linux/of_gpio.h> #include <linux/mfd/samsung/core.h> #include <linux/mfd/samsung/s2mps11.h> +#include <linux/mfd/samsung/s2mps13.h> #include <linux/mfd/samsung/s2mps14.h> #include <linux/mfd/samsung/s2mpu02.h> @@ -45,10 +46,10 @@ struct s2mps11_info { enum sec_device_type dev_type; /* - * One bit for each S2MPS14/S2MPU02 regulator whether the suspend mode - * was enabled. + * One bit for each S2MPS13/S2MPS14/S2MPU02 regulator whether + * the suspend mode was enabled. */ - unsigned long long s2mps14_suspend_state:35; + unsigned long long s2mps14_suspend_state:50; /* Array of size rdev_num with GPIO-s for external sleep control */ int *ext_control_gpio; @@ -369,12 +370,101 @@ static const struct regulator_desc s2mps11_regulators[] = { regulator_desc_s2mps11_buck6_10(10, MIN_750_MV, STEP_12_5_MV), }; +static struct regulator_ops s2mps14_reg_ops; + +#define regulator_desc_s2mps13_ldo(num, min, step, min_sel) { \ + .name = "LDO"#num, \ + .id = S2MPS13_LDO##num, \ + .ops = &s2mps14_reg_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = min, \ + .uV_step = step, \ + .linear_min_sel = min_sel, \ + .n_voltages = S2MPS14_LDO_N_VOLTAGES, \ + .vsel_reg = S2MPS13_REG_L1CTRL + num - 1, \ + .vsel_mask = S2MPS14_LDO_VSEL_MASK, \ + .enable_reg = S2MPS13_REG_L1CTRL + num - 1, \ + .enable_mask = S2MPS14_ENABLE_MASK \ +} + +#define regulator_desc_s2mps13_buck(num, min, step, min_sel) { \ + .name = "BUCK"#num, \ + .id = S2MPS13_BUCK##num, \ + .ops = &s2mps14_reg_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = min, \ + .uV_step = step, \ + .linear_min_sel = min_sel, \ + .n_voltages = S2MPS14_BUCK_N_VOLTAGES, \ + .ramp_delay = S2MPS13_BUCK_RAMP_DELAY, \ + .vsel_reg = S2MPS13_REG_B1OUT + (num - 1) * 2, \ + .vsel_mask = S2MPS14_BUCK_VSEL_MASK, \ + .enable_reg = S2MPS13_REG_B1CTRL + (num - 1) * 2, \ + .enable_mask = S2MPS14_ENABLE_MASK \ +} + +static const struct regulator_desc s2mps13_regulators[] = { + regulator_desc_s2mps13_ldo(1, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(2, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(3, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(4, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(5, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(6, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(7, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(8, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(9, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(10, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(11, MIN_800_MV, STEP_25_MV, 0x10), + regulator_desc_s2mps13_ldo(12, MIN_800_MV, STEP_25_MV, 0x10), + regulator_desc_s2mps13_ldo(13, MIN_800_MV, STEP_25_MV, 0x10), + regulator_desc_s2mps13_ldo(14, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(15, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(16, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(17, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(18, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(19, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(20, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(21, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(22, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(23, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(24, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(25, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(26, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(27, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(28, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(29, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(30, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(31, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(32, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(33, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(34, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(35, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(36, MIN_800_MV, STEP_12_5_MV, 0x00), + regulator_desc_s2mps13_ldo(37, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(38, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_ldo(39, MIN_1000_MV, STEP_25_MV, 0x08), + regulator_desc_s2mps13_ldo(40, MIN_1400_MV, STEP_50_MV, 0x0C), + regulator_desc_s2mps13_buck(1, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(2, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(3, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(4, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(5, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(6, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(7, MIN_500_MV, STEP_6_25_MV, 0x10), + regulator_desc_s2mps13_buck(8, MIN_1000_MV, STEP_12_5_MV, 0x20), + regulator_desc_s2mps13_buck(9, MIN_1000_MV, STEP_12_5_MV, 0x20), + regulator_desc_s2mps13_buck(10, MIN_500_MV, STEP_6_25_MV, 0x10), +}; + static int s2mps14_regulator_enable(struct regulator_dev *rdev) { struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev); unsigned int val; switch (s2mps11->dev_type) { + case S2MPS13X: case S2MPS14X: if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev))) val = S2MPS14_ENABLE_SUSPEND; @@ -406,6 +496,7 @@ static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev) /* Below LDO should be always on or does not support suspend mode. */ switch (s2mps11->dev_type) { + case S2MPS13X: case S2MPS14X: switch (rdev_id) { case S2MPS14_LDO3: @@ -831,6 +922,10 @@ static int s2mps11_pmic_probe(struct platform_device *pdev) s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators); regulators = s2mps11_regulators; break; + case S2MPS13X: + s2mps11->rdev_num = ARRAY_SIZE(s2mps13_regulators); + regulators = s2mps13_regulators; + break; case S2MPS14X: s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators); regulators = s2mps14_regulators; @@ -927,6 +1022,7 @@ out: static const struct platform_device_id s2mps11_pmic_id[] = { { "s2mps11-pmic", S2MPS11X}, + { "s2mps13-pmic", S2MPS13X}, { "s2mps14-pmic", S2MPS14X}, { "s2mpu02-pmic", S2MPU02}, { }, diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 1825eda..3fdb7cfb 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -28,6 +28,7 @@ #define MIN_800_MV 800000 #define MIN_750_MV 750000 #define MIN_600_MV 600000 +#define MIN_500_MV 500000 /* Macros to represent steps for LDO/BUCK */ #define STEP_50_MV 50000 @@ -41,6 +42,7 @@ enum sec_device_type { S5M8767X, S2MPA01, S2MPS11X, + S2MPS13X, S2MPS14X, S2MPU02, }; diff --git a/include/linux/mfd/samsung/s2mps13.h b/include/linux/mfd/samsung/s2mps13.h new file mode 100644 index 0000000..ce5dda8 --- /dev/null +++ b/include/linux/mfd/samsung/s2mps13.h @@ -0,0 +1,186 @@ +/* + * s2mps13.h + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __LINUX_MFD_S2MPS13_H +#define __LINUX_MFD_S2MPS13_H + +/* S2MPS13 registers */ +enum s2mps13_reg { + S2MPS13_REG_ID, + S2MPS13_REG_INT1, + S2MPS13_REG_INT2, + S2MPS13_REG_INT3, + S2MPS13_REG_INT1M, + S2MPS13_REG_INT2M, + S2MPS13_REG_INT3M, + S2MPS13_REG_ST1, + S2MPS13_REG_ST2, + S2MPS13_REG_PWRONSRC, + S2MPS13_REG_OFFSRC, + S2MPS13_REG_BU_CHG, + S2MPS13_REG_RTCCTRL, + S2MPS13_REG_CTRL1, + S2MPS13_REG_CTRL2, + S2MPS13_REG_RSVD1, + S2MPS13_REG_RSVD2, + S2MPS13_REG_RSVD3, + S2MPS13_REG_RSVD4, + S2MPS13_REG_RSVD5, + S2MPS13_REG_RSVD6, + S2MPS13_REG_CTRL3, + S2MPS13_REG_RSVD7, + S2MPS13_REG_RSVD8, + S2MPS13_REG_WRSTBI, + S2MPS13_REG_B1CTRL, + S2MPS13_REG_B1OUT, + S2MPS13_REG_B2CTRL, + S2MPS13_REG_B2OUT, + S2MPS13_REG_B3CTRL, + S2MPS13_REG_B3OUT, + S2MPS13_REG_B4CTRL, + S2MPS13_REG_B4OUT, + S2MPS13_REG_B5CTRL, + S2MPS13_REG_B5OUT, + S2MPS13_REG_B6CTRL, + S2MPS13_REG_B6OUT, + S2MPS13_REG_B7CTRL, + S2MPS13_REG_B7OUT, + S2MPS13_REG_B8CTRL, + S2MPS13_REG_B8OUT, + S2MPS13_REG_B9CTRL, + S2MPS13_REG_B9OUT, + S2MPS13_REG_B10CTRL, + S2MPS13_REG_B10OUT, + S2MPS13_REG_BB1CTRL, + S2MPS13_REG_BB1OUT, + S2MPS13_REG_BUCK_RAMP1, + S2MPS13_REG_BUCK_RAMP2, + S2MPS13_REG_LDO_DVS1, + S2MPS13_REG_LDO_DVS2, + S2MPS13_REG_LDO_DVS3, + S2MPS13_REG_B6OUT2, + S2MPS13_REG_L1CTRL, + S2MPS13_REG_L2CTRL, + S2MPS13_REG_L3CTRL, + S2MPS13_REG_L4CTRL, + S2MPS13_REG_L5CTRL, + S2MPS13_REG_L6CTRL, + S2MPS13_REG_L7CTRL, + S2MPS13_REG_L8CTRL, + S2MPS13_REG_L9CTRL, + S2MPS13_REG_L10CTRL, + S2MPS13_REG_L11CTRL, + S2MPS13_REG_L12CTRL, + S2MPS13_REG_L13CTRL, + S2MPS13_REG_L14CTRL, + S2MPS13_REG_L15CTRL, + S2MPS13_REG_L16CTRL, + S2MPS13_REG_L17CTRL, + S2MPS13_REG_L18CTRL, + S2MPS13_REG_L19CTRL, + S2MPS13_REG_L20CTRL, + S2MPS13_REG_L21CTRL, + S2MPS13_REG_L22CTRL, + S2MPS13_REG_L23CTRL, + S2MPS13_REG_L24CTRL, + S2MPS13_REG_L25CTRL, + S2MPS13_REG_L26CTRL, + S2MPS13_REG_L27CTRL, + S2MPS13_REG_L28CTRL, + S2MPS13_REG_L30CTRL, + S2MPS13_REG_L31CTRL, + S2MPS13_REG_L32CTRL, + S2MPS13_REG_L33CTRL, + S2MPS13_REG_L34CTRL, + S2MPS13_REG_L35CTRL, + S2MPS13_REG_L36CTRL, + S2MPS13_REG_L37CTRL, + S2MPS13_REG_L38CTRL, + S2MPS13_REG_L39CTRL, + S2MPS13_REG_L40CTRL, + S2MPS13_REG_LDODSCH1, + S2MPS13_REG_LDODSCH2, + S2MPS13_REG_LDODSCH3, + S2MPS13_REG_LDODSCH4, + S2MPS13_REG_LDODSCH5, +}; + +/* regulator ids */ +enum s2mps13_regulators { + S2MPS13_LDO1, + S2MPS13_LDO2, + S2MPS13_LDO3, + S2MPS13_LDO4, + S2MPS13_LDO5, + S2MPS13_LDO6, + S2MPS13_LDO7, + S2MPS13_LDO8, + S2MPS13_LDO9, + S2MPS13_LDO10, + S2MPS13_LDO11, + S2MPS13_LDO12, + S2MPS13_LDO13, + S2MPS13_LDO14, + S2MPS13_LDO15, + S2MPS13_LDO16, + S2MPS13_LDO17, + S2MPS13_LDO18, + S2MPS13_LDO19, + S2MPS13_LDO20, + S2MPS13_LDO21, + S2MPS13_LDO22, + S2MPS13_LDO23, + S2MPS13_LDO24, + S2MPS13_LDO25, + S2MPS13_LDO26, + S2MPS13_LDO27, + S2MPS13_LDO28, + S2MPS13_LDO29, + S2MPS13_LDO30, + S2MPS13_LDO31, + S2MPS13_LDO32, + S2MPS13_LDO33, + S2MPS13_LDO34, + S2MPS13_LDO35, + S2MPS13_LDO36, + S2MPS13_LDO37, + S2MPS13_LDO38, + S2MPS13_LDO39, + S2MPS13_LDO40, + S2MPS13_BUCK1, + S2MPS13_BUCK2, + S2MPS13_BUCK3, + S2MPS13_BUCK4, + S2MPS13_BUCK5, + S2MPS13_BUCK6, + S2MPS13_BUCK7, + S2MPS13_BUCK8, + S2MPS13_BUCK9, + S2MPS13_BUCK10, + + S2MPS13_REGULATOR_MAX, +}; + +/* + * Default ramp delay in uv/us. Datasheet says that ramp delay can be + * controlled however it does not specify which register is used for that. + * Let's assume that default value will be set. + */ +#define S2MPS13_BUCK_RAMP_DELAY 12500 + +#endif /* __LINUX_MFD_S2MPS13_H */ |