diff options
| -rw-r--r-- | drivers/firewire/Kconfig | 50 | ||||
| -rw-r--r-- | drivers/firewire/fw-ohci.c | 108 | ||||
| -rw-r--r-- | drivers/firewire/fw-sbp2.c | 36 | ||||
| -rw-r--r-- | drivers/firewire/fw-topology.c | 3 | ||||
| -rw-r--r-- | drivers/firewire/fw-transaction.c | 2 | ||||
| -rw-r--r-- | drivers/firewire/fw-transaction.h | 6 | ||||
| -rw-r--r-- | drivers/ieee1394/sbp2.c | 5 |
7 files changed, 143 insertions, 67 deletions
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig index fe9e768..25bdc2d 100644 --- a/drivers/firewire/Kconfig +++ b/drivers/firewire/Kconfig @@ -1,5 +1,3 @@ -# -*- shell-script -*- - comment "An alternative FireWire stack is available with EXPERIMENTAL=y" depends on EXPERIMENTAL=n @@ -21,27 +19,7 @@ config FIREWIRE NOTE: You should only build ONE of the stacks, unless you REALLY know what - you are doing. If you install both, you should configure them only as - modules rather than link them statically, and you should blacklist one - of the concurrent low-level drivers in /etc/modprobe.conf. Add either - - blacklist firewire-ohci - or - blacklist ohci1394 - - there depending on which driver you DON'T want to have auto-loaded. - You can optionally do the same with the other IEEE 1394/ FireWire - drivers. - - If you have an old modprobe which doesn't implement the blacklist - directive, use either - - install firewire-ohci /bin/true - or - install ohci1394 /bin/true - - and so on, depending on which modules you DON't want to have - auto-loaded. + you are doing. config FIREWIRE_OHCI tristate "Support for OHCI FireWire host controllers" @@ -57,8 +35,24 @@ config FIREWIRE_OHCI NOTE: - If you also build ohci1394 of the classic stack, blacklist either - ohci1394 or firewire-ohci to let hotplug load only the desired driver. + You should only build ohci1394 or firewire-ohci, but not both. + If you nevertheless want to install both, you should configure them + only as modules and blacklist the driver(s) which you don't want to + have auto-loaded. Add either + + blacklist firewire-ohci + or + blacklist ohci1394 + blacklist video1394 + blacklist dv1394 + + to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf + depending on your distribution. The latter two modules should be + blacklisted together with ohci1394 because they depend on ohci1394. + + If you have an old modprobe which doesn't implement the blacklist + directive, use "install modulename /bin/true" for the modules to be + blacklisted. config FIREWIRE_SBP2 tristate "Support for storage devices (SBP-2 protocol driver)" @@ -75,9 +69,3 @@ config FIREWIRE_SBP2 You should also enable support for disks, CD-ROMs, etc. in the SCSI configuration section. - - NOTE: - - If you also build sbp2 of the classic stack, blacklist either sbp2 - or firewire-sbp2 to let hotplug load only the desired driver. - diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 7ebad3c..996d61f 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -33,6 +33,10 @@ #include <asm/page.h> #include <asm/system.h> +#ifdef CONFIG_PPC_PMAC +#include <asm/pmac_feature.h> +#endif + #include "fw-ohci.h" #include "fw-transaction.h" @@ -175,6 +179,7 @@ struct fw_ohci { int generation; int request_generation; u32 bus_seconds; + bool old_uninorth; /* * Spinlock for accessing fw_ohci data. Never call out of @@ -276,19 +281,13 @@ static int ar_context_add_page(struct ar_context *ctx) { struct device *dev = ctx->ohci->card.device; struct ar_buffer *ab; - dma_addr_t ab_bus; + dma_addr_t uninitialized_var(ab_bus); size_t offset; - ab = (struct ar_buffer *) __get_free_page(GFP_ATOMIC); + ab = dma_alloc_coherent(dev, PAGE_SIZE, &ab_bus, GFP_ATOMIC); if (ab == NULL) return -ENOMEM; - ab_bus = dma_map_single(dev, ab, PAGE_SIZE, DMA_BIDIRECTIONAL); - if (dma_mapping_error(ab_bus)) { - free_page((unsigned long) ab); - return -ENOMEM; - } - memset(&ab->descriptor, 0, sizeof(ab->descriptor)); ab->descriptor.control = cpu_to_le16(DESCRIPTOR_INPUT_MORE | DESCRIPTOR_STATUS | @@ -299,8 +298,6 @@ static int ar_context_add_page(struct ar_context *ctx) ab->descriptor.res_count = cpu_to_le16(PAGE_SIZE - offset); ab->descriptor.branch_address = 0; - dma_sync_single_for_device(dev, ab_bus, PAGE_SIZE, DMA_BIDIRECTIONAL); - ctx->last_buffer->descriptor.branch_address = cpu_to_le32(ab_bus | 1); ctx->last_buffer->next = ab; ctx->last_buffer = ab; @@ -311,15 +308,22 @@ static int ar_context_add_page(struct ar_context *ctx) return 0; } +#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) +#define cond_le32_to_cpu(v) \ + (ohci->old_uninorth ? (__force __u32)(v) : le32_to_cpu(v)) +#else +#define cond_le32_to_cpu(v) le32_to_cpu(v) +#endif + static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer) { struct fw_ohci *ohci = ctx->ohci; struct fw_packet p; u32 status, length, tcode; - p.header[0] = le32_to_cpu(buffer[0]); - p.header[1] = le32_to_cpu(buffer[1]); - p.header[2] = le32_to_cpu(buffer[2]); + p.header[0] = cond_le32_to_cpu(buffer[0]); + p.header[1] = cond_le32_to_cpu(buffer[1]); + p.header[2] = cond_le32_to_cpu(buffer[2]); tcode = (p.header[0] >> 4) & 0x0f; switch (tcode) { @@ -331,7 +335,7 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer) break; case TCODE_READ_BLOCK_REQUEST : - p.header[3] = le32_to_cpu(buffer[3]); + p.header[3] = cond_le32_to_cpu(buffer[3]); p.header_length = 16; p.payload_length = 0; break; @@ -340,7 +344,7 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer) case TCODE_READ_BLOCK_RESPONSE: case TCODE_LOCK_REQUEST: case TCODE_LOCK_RESPONSE: - p.header[3] = le32_to_cpu(buffer[3]); + p.header[3] = cond_le32_to_cpu(buffer[3]); p.header_length = 16; p.payload_length = p.header[3] >> 16; break; @@ -357,7 +361,7 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer) /* FIXME: What to do about evt_* errors? */ length = (p.header_length + p.payload_length + 3) / 4; - status = le32_to_cpu(buffer[length]); + status = cond_le32_to_cpu(buffer[length]); p.ack = ((status >> 16) & 0x1f) - 16; p.speed = (status >> 21) & 0x7; @@ -375,7 +379,7 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer) */ if (p.ack + 16 == 0x09) - ohci->request_generation = (buffer[2] >> 16) & 0xff; + ohci->request_generation = (p.header[2] >> 16) & 0xff; else if (ctx == &ohci->ar_request_ctx) fw_core_handle_request(&ohci->card, &p); else @@ -397,6 +401,7 @@ static void ar_context_tasklet(unsigned long data) if (d->res_count == 0) { size_t size, rest, offset; + dma_addr_t buffer_bus; /* * This descriptor is finished and we may have a @@ -405,9 +410,7 @@ static void ar_context_tasklet(unsigned long data) */ offset = offsetof(struct ar_buffer, data); - dma_unmap_single(ohci->card.device, - le32_to_cpu(ab->descriptor.data_address) - offset, - PAGE_SIZE, DMA_BIDIRECTIONAL); + buffer_bus = le32_to_cpu(ab->descriptor.data_address) - offset; buffer = ab; ab = ab->next; @@ -423,7 +426,8 @@ static void ar_context_tasklet(unsigned long data) while (buffer < end) buffer = handle_ar_packet(ctx, buffer); - free_page((unsigned long)buffer); + dma_free_coherent(ohci->card.device, PAGE_SIZE, + buffer, buffer_bus); ar_context_add_page(ctx); } else { buffer = ctx->pointer; @@ -532,7 +536,7 @@ static int context_add_buffer(struct context *ctx) { struct descriptor_buffer *desc; - dma_addr_t bus_addr; + dma_addr_t uninitialized_var(bus_addr); int offset; /* @@ -1022,13 +1026,14 @@ static void bus_reset_tasklet(unsigned long data) */ self_id_count = (reg_read(ohci, OHCI1394_SelfIDCount) >> 3) & 0x3ff; - generation = (le32_to_cpu(ohci->self_id_cpu[0]) >> 16) & 0xff; + generation = (cond_le32_to_cpu(ohci->self_id_cpu[0]) >> 16) & 0xff; rmb(); for (i = 1, j = 0; j < self_id_count; i += 2, j++) { if (ohci->self_id_cpu[i] != ~ohci->self_id_cpu[i + 1]) fw_error("inconsistent self IDs\n"); - ohci->self_id_buffer[j] = le32_to_cpu(ohci->self_id_cpu[i]); + ohci->self_id_buffer[j] = + cond_le32_to_cpu(ohci->self_id_cpu[i]); } rmb(); @@ -1316,7 +1321,7 @@ ohci_set_config_rom(struct fw_card *card, u32 *config_rom, size_t length) unsigned long flags; int retval = -EBUSY; __be32 *next_config_rom; - dma_addr_t next_config_rom_bus; + dma_addr_t uninitialized_var(next_config_rom_bus); ohci = fw_ohci(card); @@ -1487,7 +1492,7 @@ static int handle_ir_dualbuffer_packet(struct context *context, void *p, *end; int i; - if (db->first_res_count > 0 && db->second_res_count > 0) { + if (db->first_res_count != 0 && db->second_res_count != 0) { if (ctx->excess_bytes <= le16_to_cpu(db->second_req_count)) { /* This descriptor isn't done yet, stop iteration. */ return 0; @@ -1513,7 +1518,7 @@ static int handle_ir_dualbuffer_packet(struct context *context, memcpy(ctx->header + i + 4, p + 8, ctx->base.header_size - 4); i += ctx->base.header_size; ctx->excess_bytes += - (le32_to_cpu(*(u32 *)(p + 4)) >> 16) & 0xffff; + (le32_to_cpu(*(__le32 *)(p + 4)) >> 16) & 0xffff; p += ctx->base.header_size + 4; } ctx->header_length = i; @@ -2048,6 +2053,18 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) int err; size_t size; +#ifdef CONFIG_PPC_PMAC + /* Necessary on some machines if fw-ohci was loaded/ unloaded before */ + if (machine_is(powermac)) { + struct device_node *ofn = pci_device_to_OF_node(dev); + + if (ofn) { + pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 1); + pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1); + } + } +#endif /* CONFIG_PPC_PMAC */ + ohci = kzalloc(sizeof(*ohci), GFP_KERNEL); if (ohci == NULL) { fw_error("Could not malloc fw_ohci data.\n"); @@ -2066,6 +2083,10 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) pci_write_config_dword(dev, OHCI1394_PCI_HCI_Control, 0); pci_set_drvdata(dev, ohci); +#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) + ohci->old_uninorth = dev->vendor == PCI_VENDOR_ID_APPLE && + dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW; +#endif spin_lock_init(&ohci->lock); tasklet_init(&ohci->bus_reset_tasklet, @@ -2182,6 +2203,19 @@ static void pci_remove(struct pci_dev *dev) pci_disable_device(dev); fw_card_put(&ohci->card); +#ifdef CONFIG_PPC_PMAC + /* On UniNorth, power down the cable and turn off the chip clock + * to save power on laptops */ + if (machine_is(powermac)) { + struct device_node *ofn = pci_device_to_OF_node(dev); + + if (ofn) { + pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0); + pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, ofn, 0, 0); + } + } +#endif /* CONFIG_PPC_PMAC */ + fw_notify("Removed fw-ohci device.\n"); } @@ -2202,6 +2236,16 @@ static int pci_suspend(struct pci_dev *pdev, pm_message_t state) if (err) fw_error("pci_set_power_state failed with %d\n", err); +/* PowerMac suspend code comes last */ +#ifdef CONFIG_PPC_PMAC + if (machine_is(powermac)) { + struct device_node *ofn = pci_device_to_OF_node(pdev); + + if (ofn) + pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 0); + } +#endif /* CONFIG_PPC_PMAC */ + return 0; } @@ -2210,6 +2254,16 @@ static int pci_resume(struct pci_dev *pdev) struct fw_ohci *ohci = pci_get_drvdata(pdev); int err; +/* PowerMac resume code comes first */ +#ifdef CONFIG_PPC_PMAC + if (machine_is(powermac)) { + struct device_node *ofn = pci_device_to_OF_node(pdev); + + if (ofn) + pmac_call_feature(PMAC_FTR_1394_ENABLE, ofn, 0, 1); + } +#endif /* CONFIG_PPC_PMAC */ + pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); err = pci_enable_device(pdev); diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index 03069a4..62b4e47 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -173,6 +173,7 @@ struct sbp2_target { #define SBP2_ORB_TIMEOUT 2000U /* Timeout in ms */ #define SBP2_ORB_NULL 0x80000000 #define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000 +#define SBP2_RETRY_LIMIT 0xf /* 15 retries */ #define SBP2_DIRECTION_TO_MEDIA 0x0 #define SBP2_DIRECTION_FROM_MEDIA 0x1 @@ -330,6 +331,11 @@ static const struct { .model = ~0, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, + /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ { + .firmware_revision = 0x002600, + .model = ~0, + .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, + }, /* * There are iPods (2nd gen, 3rd gen) with model_id == 0, but @@ -812,6 +818,30 @@ static void sbp2_target_put(struct sbp2_target *tgt) kref_put(&tgt->kref, sbp2_release_target); } +static void +complete_set_busy_timeout(struct fw_card *card, int rcode, + void *payload, size_t length, void *done) +{ + complete(done); +} + +static void sbp2_set_busy_timeout(struct sbp2_logical_unit *lu) +{ + struct fw_device *device = fw_device(lu->tgt->unit->device.parent); + DECLARE_COMPLETION_ONSTACK(done); + struct fw_transaction t; + static __be32 busy_timeout; + + /* FIXME: we should try to set dual-phase cycle_limit too */ + busy_timeout = cpu_to_be32(SBP2_RETRY_LIMIT); + + fw_send_request(device->card, &t, TCODE_WRITE_QUADLET_REQUEST, + lu->tgt->node_id, lu->generation, device->max_speed, + CSR_REGISTER_BASE + CSR_BUSY_TIMEOUT, &busy_timeout, + sizeof(busy_timeout), complete_set_busy_timeout, &done); + wait_for_completion(&done); +} + static void sbp2_reconnect(struct work_struct *work); static void sbp2_login(struct work_struct *work) @@ -864,10 +894,8 @@ static void sbp2_login(struct work_struct *work) fw_notify("%s: logged in to LUN %04x (%d retries)\n", tgt->bus_id, lu->lun, lu->retries); -#if 0 - /* FIXME: The linux1394 sbp2 does this last step. */ - sbp2_set_busy_timeout(scsi_id); -#endif + /* set appropriate retry limit(s) in BUSY_TIMEOUT register */ + sbp2_set_busy_timeout(lu); PREPARE_DELAYED_WORK(&lu->work, sbp2_reconnect); sbp2_agent_reset(lu); diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index e47bb04..d2c7a3d 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -21,6 +21,7 @@ #include <linux/module.h> #include <linux/wait.h> #include <linux/errno.h> +#include <asm/bug.h> #include <asm/system.h> #include "fw-transaction.h" #include "fw-topology.h" @@ -424,8 +425,8 @@ update_tree(struct fw_card *card, struct fw_node *root) node1 = fw_node(list1.next); while (&node0->link != &list0) { + WARN_ON(node0->port_count != node1->port_count); - /* assert(node0->port_count == node1->port_count); */ if (node0->link_on && !node1->link_on) event = FW_NODE_LINK_OFF; else if (!node0->link_on && node1->link_on) diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c index 7fcc59d..99529e5 100644 --- a/drivers/firewire/fw-transaction.c +++ b/drivers/firewire/fw-transaction.c @@ -751,7 +751,7 @@ handle_topology_map(struct fw_card *card, struct fw_request *request, void *payload, size_t length, void *callback_data) { int i, start, end; - u32 *map; + __be32 *map; if (!TCODE_IS_READ_REQUEST(tcode)) { fw_send_response(card, request, RCODE_TYPE_ERROR); diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index 09cb728..a43bb22 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -86,12 +86,12 @@ static inline void fw_memcpy_from_be32(void *_dst, void *_src, size_t size) { - u32 *dst = _dst; - u32 *src = _src; + u32 *dst = _dst; + __be32 *src = _src; int i; for (i = 0; i < size / 4; i++) - dst[i] = cpu_to_be32(src[i]); + dst[i] = be32_to_cpu(src[i]); } static inline void diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index 9e2b1964..f53f72d 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -376,6 +376,11 @@ static const struct { .model_id = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, + /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ { + .firmware_revision = 0x002600, + .model_id = SBP2_ROM_VALUE_WILDCARD, + .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, + }, /* iPod 4th generation */ { .firmware_revision = 0x0a2700, .model_id = 0x000021, |
