summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/spi/Kconfig7
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/spi_sh_sci.c205
3 files changed, 213 insertions, 0 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index aaaea81..69e28ed 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -176,6 +176,13 @@ config SPI_S3C24XX_GPIO
the inbuilt hardware cannot provide the transfer mode, or
where the board is using non hardware connected pins.
+config SPI_SH_SCI
+ tristate "SuperH SCI SPI controller"
+ depends on SPI_MASTER && SUPERH
+ select SPI_BITBANG
+ help
+ SPI driver for SuperH SCI blocks.
+
config SPI_TXX9
tristate "Toshiba TXx9 SPI controller"
depends on SPI_MASTER && GENERIC_GPIO && CPU_TX49XX
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 41fbac4..7fca043 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
+obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
# ... add above this line ...
# SPI protocol drivers (device/link on bus)
diff --git a/drivers/spi/spi_sh_sci.c b/drivers/spi/spi_sh_sci.c
new file mode 100644
index 0000000..3dbe71b
--- /dev/null
+++ b/drivers/spi/spi_sh_sci.c
@@ -0,0 +1,205 @@
+/*
+ * SH SCI SPI interface
+ *
+ * Copyright (c) 2008 Magnus Damm
+ *
+ * Based on S3C24XX GPIO based SPI driver, which is:
+ * Copyright (c) 2006 Ben Dooks
+ * Copyright (c) 2006 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <asm/spi.h>
+#include <asm/io.h>
+
+struct sh_sci_spi {
+ struct spi_bitbang bitbang;
+
+ void __iomem *membase;
+ unsigned char val;
+ struct sh_spi_info *info;
+ struct platform_device *dev;
+};
+
+#define SCSPTR(sp) (sp->membase + 0x1c)
+#define PIN_SCK (1 << 2)
+#define PIN_TXD (1 << 0)
+#define PIN_RXD PIN_TXD
+#define PIN_INIT ((1 << 1) | (1 << 3) | PIN_SCK | PIN_TXD)
+
+static inline void setbits(struct sh_sci_spi *sp, int bits, int on)
+{
+ /*
+ * We are the only user of SCSPTR so no locking is required.
+ * Reading bit 2 and 0 in SCSPTR gives pin state as input.
+ * Writing the same bits sets the output value.
+ * This makes regular read-modify-write difficult so we
+ * use sp->val to keep track of the latest register value.
+ */
+
+ if (on)
+ sp->val |= bits;
+ else
+ sp->val &= ~bits;
+
+ iowrite8(sp->val, SCSPTR(sp));
+}
+
+static inline void setsck(struct spi_device *dev, int on)
+{
+ setbits(spi_master_get_devdata(dev->master), PIN_SCK, on);
+}
+
+static inline void setmosi(struct spi_device *dev, int on)
+{
+ setbits(spi_master_get_devdata(dev->master), PIN_TXD, on);
+}
+
+static inline u32 getmiso(struct spi_device *dev)
+{
+ struct sh_sci_spi *sp = spi_master_get_devdata(dev->master);
+
+ return (ioread8(SCSPTR(sp)) & PIN_RXD) ? 1 : 0;
+}
+
+#define spidelay(x) ndelay(x)
+
+#define EXPAND_BITBANG_TXRX
+#include <linux/spi/spi_bitbang.h>
+
+static u32 sh_sci_spi_txrx_mode0(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+}
+
+static u32 sh_sci_spi_txrx_mode1(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
+}
+
+static u32 sh_sci_spi_txrx_mode2(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
+}
+
+static u32 sh_sci_spi_txrx_mode3(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
+}
+
+static void sh_sci_spi_chipselect(struct spi_device *dev, int value)
+{
+ struct sh_sci_spi *sp = spi_master_get_devdata(dev->master);
+
+ if (sp->info && sp->info->chip_select)
+ (sp->info->chip_select)(sp->info, dev->chip_select, value);
+}
+
+static int sh_sci_spi_probe(struct platform_device *dev)
+{
+ struct resource *r;
+ struct spi_master *master;
+ struct sh_sci_spi *sp;
+ int ret;
+
+ master = spi_alloc_master(&dev->dev, sizeof(struct sh_sci_spi));
+ if (master == NULL) {
+ dev_err(&dev->dev, "failed to allocate spi master\n");
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ sp = spi_master_get_devdata(master);
+
+ platform_set_drvdata(dev, sp);
+ sp->info = dev->dev.platform_data;
+
+ /* setup spi bitbang adaptor */
+ sp->bitbang.master = spi_master_get(master);
+ sp->bitbang.master->bus_num = sp->info->bus_num;
+ sp->bitbang.master->num_chipselect = sp->info->num_chipselect;
+ sp->bitbang.chipselect = sh_sci_spi_chipselect;
+
+ sp->bitbang.txrx_word[SPI_MODE_0] = sh_sci_spi_txrx_mode0;
+ sp->bitbang.txrx_word[SPI_MODE_1] = sh_sci_spi_txrx_mode1;
+ sp->bitbang.txrx_word[SPI_MODE_2] = sh_sci_spi_txrx_mode2;
+ sp->bitbang.txrx_word[SPI_MODE_3] = sh_sci_spi_txrx_mode3;
+
+ r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ ret = -ENOENT;
+ goto err1;
+ }
+ sp->membase = ioremap(r->start, r->end - r->start + 1);
+ if (!sp->membase) {
+ ret = -ENXIO;
+ goto err1;
+ }
+ sp->val = ioread8(SCSPTR(sp));
+ setbits(sp, PIN_INIT, 1);
+
+ ret = spi_bitbang_start(&sp->bitbang);
+ if (!ret)
+ return 0;
+
+ setbits(sp, PIN_INIT, 0);
+ iounmap(sp->membase);
+ err1:
+ spi_master_put(sp->bitbang.master);
+ err0:
+ return ret;
+}
+
+static int sh_sci_spi_remove(struct platform_device *dev)
+{
+ struct sh_sci_spi *sp = platform_get_drvdata(dev);
+
+ iounmap(sp->membase);
+ setbits(sp, PIN_INIT, 0);
+ spi_bitbang_stop(&sp->bitbang);
+ spi_master_put(sp->bitbang.master);
+ return 0;
+}
+
+static struct platform_driver sh_sci_spi_drv = {
+ .probe = sh_sci_spi_probe,
+ .remove = sh_sci_spi_remove,
+ .driver = {
+ .name = "spi_sh_sci",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init sh_sci_spi_init(void)
+{
+ return platform_driver_register(&sh_sci_spi_drv);
+}
+module_init(sh_sci_spi_init);
+
+static void __exit sh_sci_spi_exit(void)
+{
+ platform_driver_unregister(&sh_sci_spi_drv);
+}
+module_exit(sh_sci_spi_exit);
+
+MODULE_DESCRIPTION("SH SCI SPI Driver");
+MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
+MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud