diff options
-rw-r--r-- | arch/arm/mach-tegra/platsmp.c | 93 |
1 files changed, 38 insertions, 55 deletions
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index e78d52d..41971ac 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -35,13 +35,8 @@ #include "common.h" #include "iomap.h" -extern void tegra_secondary_startup(void); - static cpumask_t tegra_cpu_init_mask; -#define EVP_CPU_RESET_VECTOR \ - (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100) - static void __cpuinit tegra_secondary_init(unsigned int cpu) { /* @@ -54,26 +49,48 @@ static void __cpuinit tegra_secondary_init(unsigned int cpu) cpumask_set_cpu(cpu, &tegra_cpu_init_mask); } -static int tegra20_power_up_cpu(unsigned int cpu) + +static int tegra20_boot_secondary(unsigned int cpu, struct task_struct *idle) { - /* Enable the CPU clock. */ - tegra_enable_cpu_clock(cpu); + cpu = cpu_logical_map(cpu); - /* Clear flow controller CSR. */ - flowctrl_write_cpu_csr(cpu, 0); + /* + * Force the CPU into reset. The CPU must remain in reset when + * the flow controller state is cleared (which will cause the + * flow controller to stop driving reset if the CPU has been + * power-gated via the flow controller). This will have no + * effect on first boot of the CPU since it should already be + * in reset. + */ + tegra_put_cpu_in_reset(cpu); + /* + * Unhalt the CPU. If the flow controller was used to + * power-gate the CPU this will cause the flow controller to + * stop driving reset. The CPU will remain in reset because the + * clock and reset block is now driving reset. + */ + flowctrl_write_cpu_halt(cpu, 0); + + tegra_enable_cpu_clock(cpu); + flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */ + tegra_cpu_out_of_reset(cpu); return 0; } -static int tegra30_power_up_cpu(unsigned int cpu) +static int tegra30_boot_secondary(unsigned int cpu, struct task_struct *idle) { int ret, pwrgateid; unsigned long timeout; + cpu = cpu_logical_map(cpu); pwrgateid = tegra_cpu_powergate_id(cpu); if (pwrgateid < 0) return pwrgateid; + tegra_put_cpu_in_reset(cpu); + flowctrl_write_cpu_halt(cpu, 0); + /* * The power up sequence of cold boot CPU and warm boot CPU * was different. @@ -85,7 +102,7 @@ static int tegra30_power_up_cpu(unsigned int cpu) * the IO clamps. * For cold boot CPU, do not wait. After the cold boot CPU be * booted, it will run to tegra_secondary_init() and set - * tegra_cpu_init_mask which influences what tegra30_power_up_cpu() + * tegra_cpu_init_mask which influences what tegra30_boot_secondary() * next time around. */ if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) { @@ -129,54 +146,20 @@ remove_clamps: udelay(10); - /* Clear flow controller CSR. */ - flowctrl_write_cpu_csr(cpu, 0); - + flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */ + tegra_cpu_out_of_reset(cpu); return 0; } -static int __cpuinit tegra_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int __cpuinit tegra_boot_secondary(unsigned int cpu, + struct task_struct *idle) { - int status; - - cpu = cpu_logical_map(cpu); - - /* - * Force the CPU into reset. The CPU must remain in reset when the - * flow controller state is cleared (which will cause the flow - * controller to stop driving reset if the CPU has been power-gated - * via the flow controller). This will have no effect on first boot - * of the CPU since it should already be in reset. - */ - tegra_put_cpu_in_reset(cpu); + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20) + return tegra20_boot_secondary(cpu, idle); + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30) + return tegra30_boot_secondary(cpu, idle); - /* - * Unhalt the CPU. If the flow controller was used to power-gate the - * CPU this will cause the flow controller to stop driving reset. - * The CPU will remain in reset because the clock and reset block - * is now driving reset. - */ - flowctrl_write_cpu_halt(cpu, 0); - - switch (tegra_chip_id) { - case TEGRA20: - status = tegra20_power_up_cpu(cpu); - break; - case TEGRA30: - status = tegra30_power_up_cpu(cpu); - break; - default: - status = -EINVAL; - break; - } - - if (status) - goto done; - - /* Take the CPU out of reset. */ - tegra_cpu_out_of_reset(cpu); -done: - return status; + return -EINVAL; } static void __init tegra_smp_prepare_cpus(unsigned int max_cpus) |