summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/powerpc/booting-without-of.txt13
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe.c32
-rw-r--r--include/asm-powerpc/qe.h1
3 files changed, 46 insertions, 0 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index c3fc9d9..ee0209a 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1629,6 +1629,19 @@ platforms are moved over to use the flattened-device-tree model.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- pio-handle : The phandle for the Parallel I/O port configuration.
+ - rx-clock-name: the UCC receive clock source
+ "none": clock source is disabled
+ "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+ "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+ - tx-clock-name: the UCC transmit clock source
+ "none": clock source is disabled
+ "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+ "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+ The following two properties are deprecated. rx-clock has been replaced
+ with rx-clock-name, and tx-clock has been replaced with tx-clock-name.
+ Drivers that currently use the deprecated properties should continue to
+ do so, in order to support older device trees, but they should be updated
+ to check for the new properties first.
- rx-clock : represents the UCC receive clock source.
0x00 : clock source is disabled;
0x1~0x10 : clock source is BRG1~BRG16 respectively;
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 1df3b4a..21e0106 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -203,6 +203,38 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
}
EXPORT_SYMBOL(qe_setbrg);
+/* Convert a string to a QE clock source enum
+ *
+ * This function takes a string, typically from a property in the device
+ * tree, and returns the corresponding "enum qe_clock" value.
+*/
+enum qe_clock qe_clock_source(const char *source)
+{
+ unsigned int i;
+
+ if (strcasecmp(source, "none") == 0)
+ return QE_CLK_NONE;
+
+ if (strncasecmp(source, "brg", 3) == 0) {
+ i = simple_strtoul(source + 3, NULL, 10);
+ if ((i >= 1) && (i <= 16))
+ return (QE_BRG1 - 1) + i;
+ else
+ return QE_CLK_DUMMY;
+ }
+
+ if (strncasecmp(source, "clk", 3) == 0) {
+ i = simple_strtoul(source + 3, NULL, 10);
+ if ((i >= 1) && (i <= 24))
+ return (QE_CLK1 - 1) + i;
+ else
+ return QE_CLK_DUMMY;
+ }
+
+ return QE_CLK_DUMMY;
+}
+EXPORT_SYMBOL(qe_clock_source);
+
/* Initialize SNUMs (thread serial numbers) according to
* QE Module Control chapter, SNUM table
*/
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
index bcf60be..a24b7b1 100644
--- a/include/asm-powerpc/qe.h
+++ b/include/asm-powerpc/qe.h
@@ -84,6 +84,7 @@ extern int par_io_data_set(u8 port, u8 pin, u8 val);
/* QE internal API */
int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+enum qe_clock qe_clock_source(const char *source);
int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
int qe_get_snum(void);
void qe_put_snum(u8 snum);
OpenPOWER on IntegriCloud