summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/serial/sh-sci.c145
-rw-r--r--drivers/serial/sh-sci.h12
2 files changed, 43 insertions, 114 deletions
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index b0feea4..cf663b7 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -64,10 +64,6 @@ struct sci_port {
/* Port IRQs: ERI, RXI, TXI, BRI (optional) */
unsigned int irqs[SCIx_NR_IRQS];
- /* Port pin configuration */
- void (*init_pins)(struct uart_port *port,
- unsigned int cflag);
-
/* Port enable callback */
void (*enable)(struct uart_port *port);
@@ -172,7 +168,7 @@ static inline void h8300_sci_disable(struct uart_port *port)
#endif
#if defined(__H8300H__) || defined(__H8300S__)
-static void sci_init_pins_sci(struct uart_port *port, unsigned int cflag)
+static void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
int ch = (port->mapbase - SMR0) >> 3;
@@ -187,140 +183,99 @@ static void sci_init_pins_sci(struct uart_port *port, unsigned int cflag)
/* tx mark output*/
H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
}
-#else
-#define sci_init_pins_sci NULL
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
-static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
- unsigned int fcr_val = 0;
-
- if (cflag & CRTSCTS)
- fcr_val |= SCFCR_MCE;
-
- sci_out(port, SCFCR, fcr_val);
-}
-#else
-#define sci_init_pins_irda NULL
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
-{
- unsigned int fcr_val = 0;
-
- set_sh771x_scif_pfc(port);
- if (cflag & CRTSCTS)
- fcr_val |= SCFCR_MCE;
- sci_out(port, SCFCR, fcr_val);
+ if (port->mapbase == 0xA4400000) {
+ __raw_writew(__raw_readw(PACR) & 0xffc0, PACR);
+ __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR);
+ } else if (port->mapbase == 0xA4410000)
+ __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR);
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
- unsigned int fcr_val = 0;
unsigned short data;
if (cflag & CRTSCTS) {
/* enable RTS/CTS */
if (port->mapbase == 0xa4430000) { /* SCIF0 */
/* Clear PTCR bit 9-2; enable all scif pins but sck */
- data = ctrl_inw(PORT_PTCR);
- ctrl_outw((data & 0xfc03), PORT_PTCR);
+ data = __raw_readw(PORT_PTCR);
+ __raw_writew((data & 0xfc03), PORT_PTCR);
} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
/* Clear PVCR bit 9-2 */
- data = ctrl_inw(PORT_PVCR);
- ctrl_outw((data & 0xfc03), PORT_PVCR);
+ data = __raw_readw(PORT_PVCR);
+ __raw_writew((data & 0xfc03), PORT_PVCR);
}
- fcr_val |= SCFCR_MCE;
} else {
if (port->mapbase == 0xa4430000) { /* SCIF0 */
/* Clear PTCR bit 5-2; enable only tx and rx */
- data = ctrl_inw(PORT_PTCR);
- ctrl_outw((data & 0xffc3), PORT_PTCR);
+ data = __raw_readw(PORT_PTCR);
+ __raw_writew((data & 0xffc3), PORT_PTCR);
} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
/* Clear PVCR bit 5-2 */
- data = ctrl_inw(PORT_PVCR);
- ctrl_outw((data & 0xffc3), PORT_PVCR);
+ data = __raw_readw(PORT_PVCR);
+ __raw_writew((data & 0xffc3), PORT_PVCR);
}
}
- sci_out(port, SCFCR, fcr_val);
}
#elif defined(CONFIG_CPU_SH3)
/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
- unsigned int fcr_val = 0;
unsigned short data;
/* We need to set SCPCR to enable RTS/CTS */
- data = ctrl_inw(SCPCR);
+ data = __raw_readw(SCPCR);
/* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
- ctrl_outw(data & 0x0fcf, SCPCR);
+ __raw_writew(data & 0x0fcf, SCPCR);
- if (cflag & CRTSCTS)
- fcr_val |= SCFCR_MCE;
- else {
+ if (!(cflag & CRTSCTS)) {
/* We need to set SCPCR to enable RTS/CTS */
- data = ctrl_inw(SCPCR);
+ data = __raw_readw(SCPCR);
/* Clear out SCP7MD1,0, SCP4MD1,0,
Set SCP6MD1,0 = {01} (output) */
- ctrl_outw((data & 0x0fcf) | 0x1000, SCPCR);
+ __raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
data = ctrl_inb(SCPDR);
/* Set /RTS2 (bit6) = 0 */
ctrl_outb(data & 0xbf, SCPDR);
}
-
- sci_out(port, SCFCR, fcr_val);
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
- unsigned int fcr_val = 0;
unsigned short data;
if (port->mapbase == 0xffe00000) {
- data = ctrl_inw(PSCR);
+ data = __raw_readw(PSCR);
data &= ~0x03cf;
- if (cflag & CRTSCTS)
- fcr_val |= SCFCR_MCE;
- else
+ if (!(cflag & CRTSCTS))
data |= 0x0340;
- ctrl_outw(data, PSCR);
+ __raw_writew(data, PSCR);
}
- /* SCIF1 and SCIF2 should be setup by board code */
-
- sci_out(port, SCFCR, fcr_val);
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
-{
- /* Nothing to do here.. */
- sci_out(port, SCFCR, 0);
}
-#else
-/* For SH7750 */
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
-{
- unsigned int fcr_val = 0;
-
- if (cflag & CRTSCTS) {
- fcr_val |= SCFCR_MCE;
- } else {
-#if defined(CONFIG_CPU_SUBTYPE_SH7343) || defined(CONFIG_CPU_SUBTYPE_SH7366)
- /* Nothing */
#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785) || \
defined(CONFIG_CPU_SUBTYPE_SHX3)
- ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+ if (!(cflag & CRTSCTS))
+ __raw_writew(0x0080, SCSPTR0); /* Set RTS = 1 */
+}
+#elif defined(CONFIG_CPU_SH4)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+ if (!(cflag & CRTSCTS))
+ __raw_writew(0x0080, SCSPTR2); /* Set RTS = 1 */
+}
#else
- ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
-#endif
- }
- sci_out(port, SCFCR, fcr_val);
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+ /* Nothing to do */
}
#endif
@@ -941,7 +896,6 @@ static void sci_shutdown(struct uart_port *port)
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
- struct sci_port *s = &sci_ports[port->line];
unsigned int status, baud, smr_val;
int t = -1;
@@ -983,8 +937,8 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
}
- if (likely(s->init_pins))
- s->init_pins(port, termios->c_cflag);
+ sci_init_pins(port, termios->c_cflag);
+ sci_out(port, SCFCR, (termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0);
sci_out(port, SCSCR, SCSCR_INIT(port));
@@ -1025,19 +979,6 @@ static void sci_config_port(struct uart_port *port, int flags)
port->type = s->type;
- switch (port->type) {
- case PORT_SCI:
- s->init_pins = sci_init_pins_sci;
- break;
- case PORT_SCIF:
- case PORT_SCIFA:
- s->init_pins = sci_init_pins_scif;
- break;
- case PORT_IRDA:
- s->init_pins = sci_init_pins_irda;
- break;
- }
-
if (port->flags & UPF_IOREMAP && !port->membase) {
#if defined(CONFIG_SUPERH64)
port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 4479a91..38c600c 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -507,18 +507,6 @@ static inline int sci_rxd_in(struct uart_port *port)
{
return sci_in(port,SCxSR)&0x0010 ? 1 : 0;
}
-static inline void set_sh771x_scif_pfc(struct uart_port *port)
-{
- if (port->mapbase == 0xA4400000){
- ctrl_outw(ctrl_inw(PACR)&0xffc0,PACR);
- ctrl_outw(ctrl_inw(PBCR)&0x0fff,PBCR);
- return;
- }
- if (port->mapbase == 0xA4410000){
- ctrl_outw(ctrl_inw(PBCR)&0xf003,PBCR);
- return;
- }
-}
#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
static inline int sci_rxd_in(struct uart_port *port)
OpenPOWER on IntegriCloud