diff options
| -rw-r--r-- | Documentation/hwmon/smsc47b397 | 8 | ||||
| -rw-r--r-- | drivers/hwmon/smsc47b397.c | 7 |
2 files changed, 10 insertions, 5 deletions
diff --git a/Documentation/hwmon/smsc47b397 b/Documentation/hwmon/smsc47b397 index da9d80c..20682f1 100644 --- a/Documentation/hwmon/smsc47b397 +++ b/Documentation/hwmon/smsc47b397 @@ -3,6 +3,7 @@ Kernel driver smsc47b397 Supported chips: * SMSC LPC47B397-NC + * SMSC SCH5307-NS Prefix: 'smsc47b397' Addresses scanned: none, address read from Super I/O config space Datasheet: In this file @@ -12,11 +13,14 @@ Authors: Mark M. Hoffman <mhoffman@lightlink.com> November 23, 2004 -The following specification describes the SMSC LPC47B397-NC sensor chip +The following specification describes the SMSC LPC47B397-NC[1] sensor chip (for which there is no public datasheet available). This document was provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected by Mark M. Hoffman <mhoffman@lightlink.com>. +[1] And SMSC SCH5307-NS, which has a different device ID but is otherwise +compatible. + * * * * * Methods for detecting the HP SIO and reading the thermal data on a dc7100. @@ -127,7 +131,7 @@ OUT DX,AL The registers of interest for identifying the SIO on the dc7100 are Device ID (0x20) and Device Rev (0x21). -The Device ID will read 0X6F +The Device ID will read 0x6F (for SCH5307-NS, 0x81) The Device Rev currently reads 0x01 Obtaining the HWM Base Address. diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c index 7fe7157..37ed8b3 100644 --- a/drivers/hwmon/smsc47b397.c +++ b/drivers/hwmon/smsc47b397.c @@ -299,7 +299,7 @@ static int __init smsc47b397_find(unsigned short *addr) superio_enter(); id = superio_inb(SUPERIO_REG_DEVID); - if (id != 0x6f) { + if ((id != 0x6f) && (id != 0x81)) { superio_exit(); return -ENODEV; } @@ -310,8 +310,9 @@ static int __init smsc47b397_find(unsigned short *addr) *addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8) | superio_inb(SUPERIO_REG_BASE_LSB); - printk(KERN_INFO "smsc47b397: found SMSC LPC47B397-NC " - "(base address 0x%04x, revision %u)\n", *addr, rev); + printk(KERN_INFO "smsc47b397: found SMSC %s " + "(base address 0x%04x, revision %u)\n", + id == 0x81 ? "SCH5307-NS" : "LPC47B397-NC", *addr, rev); superio_exit(); return 0; |
