diff options
86 files changed, 5202 insertions, 2309 deletions
diff --git a/arch/m68k/include/asm/checksum.h b/arch/m68k/include/asm/checksum.h index 1cf5447..ec51448 100644 --- a/arch/m68k/include/asm/checksum.h +++ b/arch/m68k/include/asm/checksum.h @@ -1,5 +1,170 @@ -#ifdef __uClinux__ -#include "checksum_no.h" +#ifndef _M68K_CHECKSUM_H +#define _M68K_CHECKSUM_H + +#include <linux/in6.h> + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +extern __wsum csum_partial_copy_from_user(const void __user *src, + void *dst, + int len, __wsum sum, + int *csum_err); + +extern __wsum csum_partial_copy_nocheck(const void *src, + void *dst, int len, + __wsum sum); + + +#ifdef CONFIG_COLDFIRE + +/* + * The ColdFire cores don't support all the 68k instructions used + * in the optimized checksum code below. So it reverts back to using + * more standard C coded checksums. The fast checksum code is + * significantly larger than the optimized version, so it is not + * inlined here. + */ +__sum16 ip_fast_csum(const void *iph, unsigned int ihl); + +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int tmp = (__force u32)sum; + + tmp = (tmp & 0xffff) + (tmp >> 16); + tmp = (tmp & 0xffff) + (tmp >> 16); + + return (__force __sum16)~tmp; +} + #else -#include "checksum_mm.h" -#endif + +/* + * This is a version of ip_fast_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + unsigned int sum = 0; + unsigned long tmp; + + __asm__ ("subqw #1,%2\n" + "1:\t" + "movel %1@+,%3\n\t" + "addxl %3,%0\n\t" + "dbra %2,1b\n\t" + "movel %0,%3\n\t" + "swap %3\n\t" + "addxw %3,%0\n\t" + "clrw %3\n\t" + "addxw %3,%0\n\t" + : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp) + : "0" (sum), "1" (iph), "2" (ihl) + : "memory"); + return (__force __sum16)~sum; +} + +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int tmp = (__force u32)sum; + + __asm__("swap %1\n\t" + "addw %1, %0\n\t" + "clrw %1\n\t" + "addxw %1, %0" + : "=&d" (sum), "=&d" (tmp) + : "0" (sum), "1" (tmp)); + + return (__force __sum16)~sum; +} + +#endif /* CONFIG_COLDFIRE */ + +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + __asm__ ("addl %2,%0\n\t" + "addxl %3,%0\n\t" + "addxl %4,%0\n\t" + "clrl %1\n\t" + "addxl %1,%0" + : "=&d" (sum), "=d" (saddr) + : "g" (daddr), "1" (saddr), "d" (len + proto), + "0" (sum)); + return sum; +} + + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 +csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ + +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold (csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +static __inline__ __sum16 +csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, + __u32 len, unsigned short proto, __wsum sum) +{ + register unsigned long tmp; + __asm__("addl %2@,%0\n\t" + "movel %2@(4),%1\n\t" + "addxl %1,%0\n\t" + "movel %2@(8),%1\n\t" + "addxl %1,%0\n\t" + "movel %2@(12),%1\n\t" + "addxl %1,%0\n\t" + "movel %3@,%1\n\t" + "addxl %1,%0\n\t" + "movel %3@(4),%1\n\t" + "addxl %1,%0\n\t" + "movel %3@(8),%1\n\t" + "addxl %1,%0\n\t" + "movel %3@(12),%1\n\t" + "addxl %1,%0\n\t" + "addxl %4,%0\n\t" + "clrl %1\n\t" + "addxl %1,%0" + : "=&d" (sum), "=&d" (tmp) + : "a" (saddr), "a" (daddr), "d" (len + proto), + "0" (sum)); + + return csum_fold(sum); +} + +#endif /* _M68K_CHECKSUM_H */ diff --git a/arch/m68k/include/asm/checksum_mm.h b/arch/m68k/include/asm/checksum_mm.h deleted file mode 100644 index 494f9ae..0000000 --- a/arch/m68k/include/asm/checksum_mm.h +++ /dev/null @@ -1,148 +0,0 @@ -#ifndef _M68K_CHECKSUM_H -#define _M68K_CHECKSUM_H - -#include <linux/in6.h> - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -extern __wsum csum_partial_copy_from_user(const void __user *src, - void *dst, - int len, __wsum sum, - int *csum_err); - -extern __wsum csum_partial_copy_nocheck(const void *src, - void *dst, int len, - __wsum sum); - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - * - */ -static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - unsigned int sum = 0; - unsigned long tmp; - - __asm__ ("subqw #1,%2\n" - "1:\t" - "movel %1@+,%3\n\t" - "addxl %3,%0\n\t" - "dbra %2,1b\n\t" - "movel %0,%3\n\t" - "swap %3\n\t" - "addxw %3,%0\n\t" - "clrw %3\n\t" - "addxw %3,%0\n\t" - : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp) - : "0" (sum), "1" (iph), "2" (ihl) - : "memory"); - return (__force __sum16)~sum; -} - -/* - * Fold a partial checksum - */ - -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int tmp = (__force u32)sum; - __asm__("swap %1\n\t" - "addw %1, %0\n\t" - "clrw %1\n\t" - "addxw %1, %0" - : "=&d" (sum), "=&d" (tmp) - : "0" (sum), "1" (tmp)); - return (__force __sum16)~sum; -} - - -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - __asm__ ("addl %2,%0\n\t" - "addxl %3,%0\n\t" - "addxl %4,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=d" (saddr) - : "g" (daddr), "1" (saddr), "d" (len + proto), - "0" (sum)); - return sum; -} - - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ - -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold (csum_partial(buff, len, 0)); -} - -#define _HAVE_ARCH_IPV6_CSUM -static __inline__ __sum16 -csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, - __u32 len, unsigned short proto, __wsum sum) -{ - register unsigned long tmp; - __asm__("addl %2@,%0\n\t" - "movel %2@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(12),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@,%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(12),%1\n\t" - "addxl %1,%0\n\t" - "addxl %4,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=&d" (tmp) - : "a" (saddr), "a" (daddr), "d" (len + proto), - "0" (sum)); - - return csum_fold(sum); -} - -#endif /* _M68K_CHECKSUM_H */ diff --git a/arch/m68k/include/asm/checksum_no.h b/arch/m68k/include/asm/checksum_no.h deleted file mode 100644 index 8188348..0000000 --- a/arch/m68k/include/asm/checksum_no.h +++ /dev/null @@ -1,132 +0,0 @@ -#ifndef _M68K_CHECKSUM_H -#define _M68K_CHECKSUM_H - -#include <linux/in6.h> - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -__wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum); - - -/* - * the same as csum_partial_copy, but copies from user space. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -extern __wsum csum_partial_copy_from_user(const void __user *src, - void *dst, int len, __wsum sum, int *csum_err); - -__sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -/* - * Fold a partial checksum - */ - -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int tmp = (__force u32)sum; -#ifdef CONFIG_COLDFIRE - tmp = (tmp & 0xffff) + (tmp >> 16); - tmp = (tmp & 0xffff) + (tmp >> 16); - return (__force __sum16)~tmp; -#else - __asm__("swap %1\n\t" - "addw %1, %0\n\t" - "clrw %1\n\t" - "addxw %1, %0" - : "=&d" (sum), "=&d" (tmp) - : "0" (sum), "1" (sum)); - return (__force __sum16)~sum; -#endif -} - - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ - -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - __asm__ ("addl %1,%0\n\t" - "addxl %4,%0\n\t" - "addxl %5,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=&d" (saddr) - : "0" (daddr), "1" (saddr), "d" (len + proto), - "d"(sum)); - return sum; -} - -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ - -extern __sum16 ip_compute_csum(const void *buff, int len); - -#define _HAVE_ARCH_IPV6_CSUM -static __inline__ __sum16 -csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, - __u32 len, unsigned short proto, __wsum sum) -{ - register unsigned long tmp; - __asm__("addl %2@,%0\n\t" - "movel %2@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %2@(12),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@,%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(4),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(8),%1\n\t" - "addxl %1,%0\n\t" - "movel %3@(12),%1\n\t" - "addxl %1,%0\n\t" - "addxl %4,%0\n\t" - "clrl %1\n\t" - "addxl %1,%0" - : "=&d" (sum), "=&d" (tmp) - : "a" (saddr), "a" (daddr), "d" (len + proto), - "0" (sum)); - - return csum_fold(sum); -} - -#endif /* _M68K_CHECKSUM_H */ diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h index b82e660..6fbdfe8 100644 --- a/arch/m68k/include/asm/dma.h +++ b/arch/m68k/include/asm/dma.h @@ -1,5 +1,491 @@ -#ifdef __uClinux__ -#include "dma_no.h" +#ifndef _M68K_DMA_H +#define _M68K_DMA_H 1 + +#ifdef CONFIG_COLDFIRE +/* + * ColdFire DMA Model: + * ColdFire DMA supports two forms of DMA: Single and Dual address. Single + * address mode emits a source address, and expects that the device will either + * pick up the data (DMA READ) or source data (DMA WRITE). This implies that + * the device will place data on the correct byte(s) of the data bus, as the + * memory transactions are always 32 bits. This implies that only 32 bit + * devices will find single mode transfers useful. Dual address DMA mode + * performs two cycles: source read and destination write. ColdFire will + * align the data so that the device will always get the correct bytes, thus + * is useful for 8 and 16 bit devices. This is the mode that is supported + * below. + * + * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 + * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) + * + * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000 + * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) + * + * APR/18/2002 : added proper support for MCF5272 DMA controller. + * Arthur Shipkowski (art@videon-central.com) + */ + +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfdma.h> + +/* + * Set number of channels of DMA on ColdFire for different implementations. + */ +#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \ + defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) +#define MAX_M68K_DMA_CHANNELS 4 +#elif defined(CONFIG_M5272) +#define MAX_M68K_DMA_CHANNELS 1 +#elif defined(CONFIG_M532x) +#define MAX_M68K_DMA_CHANNELS 0 #else -#include "dma_mm.h" +#define MAX_M68K_DMA_CHANNELS 2 #endif + +extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS]; +extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; + +#if !defined(CONFIG_M5272) +#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */ +#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */ +#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */ +#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */ + +/* I/O to memory, 8 bits, mode */ +#define DMA_MODE_READ 0 +/* memory to I/O, 8 bits, mode */ +#define DMA_MODE_WRITE 1 +/* I/O to memory, 16 bits, mode */ +#define DMA_MODE_READ_WORD 2 +/* memory to I/O, 16 bits, mode */ +#define DMA_MODE_WRITE_WORD 3 +/* I/O to memory, 32 bits, mode */ +#define DMA_MODE_READ_LONG 4 +/* memory to I/O, 32 bits, mode */ +#define DMA_MODE_WRITE_LONG 5 +/* I/O to memory, 8 bits, single-address-mode */ +#define DMA_MODE_READ_SINGLE 8 +/* memory to I/O, 8 bits, single-address-mode */ +#define DMA_MODE_WRITE_SINGLE 9 +/* I/O to memory, 16 bits, single-address-mode */ +#define DMA_MODE_READ_WORD_SINGLE 10 +/* memory to I/O, 16 bits, single-address-mode */ +#define DMA_MODE_WRITE_WORD_SINGLE 11 +/* I/O to memory, 32 bits, single-address-mode */ +#define DMA_MODE_READ_LONG_SINGLE 12 +/* memory to I/O, 32 bits, single-address-mode */ +#define DMA_MODE_WRITE_LONG_SINGLE 13 + +#else /* CONFIG_M5272 is defined */ + +/* Source static-address mode */ +#define DMA_MODE_SRC_SA_BIT 0x01 +/* Two bits to select between all four modes */ +#define DMA_MODE_SSIZE_MASK 0x06 +/* Offset to shift bits in */ +#define DMA_MODE_SSIZE_OFF 0x01 +/* Destination static-address mode */ +#define DMA_MODE_DES_SA_BIT 0x10 +/* Two bits to select between all four modes */ +#define DMA_MODE_DSIZE_MASK 0x60 +/* Offset to shift bits in */ +#define DMA_MODE_DSIZE_OFF 0x05 +/* Size modifiers */ +#define DMA_MODE_SIZE_LONG 0x00 +#define DMA_MODE_SIZE_BYTE 0x01 +#define DMA_MODE_SIZE_WORD 0x02 +#define DMA_MODE_SIZE_LINE 0x03 + +/* + * Aliases to help speed quick ports; these may be suboptimal, however. They + * do not include the SINGLE mode modifiers since the MCF5272 does not have a + * mode where the device is in control of its addressing. + */ + +/* I/O to memory, 8 bits, mode */ +#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) +/* memory to I/O, 8 bits, mode */ +#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) +/* I/O to memory, 16 bits, mode */ +#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) +/* memory to I/O, 16 bits, mode */ +#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) +/* I/O to memory, 32 bits, mode */ +#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) +/* memory to I/O, 32 bits, mode */ +#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) + +#endif /* !defined(CONFIG_M5272) */ + +#if !defined(CONFIG_M5272) +/* enable/disable a specific DMA channel */ +static __inline__ void enable_dma(unsigned int dmanr) +{ + volatile unsigned short *dmawp; + +#ifdef DMA_DEBUG + printk("enable_dma(dmanr=%d)\n", dmanr); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT; +} + +static __inline__ void disable_dma(unsigned int dmanr) +{ + volatile unsigned short *dmawp; + volatile unsigned char *dmapb; + +#ifdef DMA_DEBUG + printk("disable_dma(dmanr=%d)\n", dmanr); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + dmapb = (unsigned char *) dma_base_addr[dmanr]; + + /* Turn off external requests, and stop any DMA in progress */ + dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT; + dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE; +} + +/* + * Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while interrupts are disabled! --- + * + * This is a NOP for ColdFire. Provide a stub for compatibility. + */ +static __inline__ void clear_dma_ff(unsigned int dmanr) +{ +} + +/* set mode (above) for a specific DMA channel */ +static __inline__ void set_dma_mode(unsigned int dmanr, char mode) +{ + + volatile unsigned char *dmabp; + volatile unsigned short *dmawp; + +#ifdef DMA_DEBUG + printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); +#endif + + dmabp = (unsigned char *) dma_base_addr[dmanr]; + dmawp = (unsigned short *) dma_base_addr[dmanr]; + + /* Clear config errors */ + dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; + + /* Set command register */ + dmawp[MCFDMA_DCR] = + MCFDMA_DCR_INT | /* Enable completion irq */ + MCFDMA_DCR_CS | /* Force one xfer per request */ + MCFDMA_DCR_AA | /* Enable auto alignment */ + /* single-address-mode */ + ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) | + /* sets s_rw (-> r/w) high if Memory to I/0 */ + ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) | + /* Memory to I/O or I/O to Memory */ + ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) | + /* 32 bit, 16 bit or 8 bit transfers */ + ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD : + ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG : + MCFDMA_DCR_SSIZE_BYTE)) | + ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD : + ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG : + MCFDMA_DCR_DSIZE_BYTE)); + +#ifdef DEBUG_DMA + printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__, + dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR], + (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]); +#endif +} + +/* Set transfer address for specific DMA channel */ +static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) +{ + volatile unsigned short *dmawp; + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + dmalp = (unsigned int *) dma_base_addr[dmanr]; + + /* Determine which address registers are used for memory/device accesses */ + if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) { + /* Source incrementing, must be memory */ + dmalp[MCFDMA_SAR] = a; + /* Set dest address, must be device */ + dmalp[MCFDMA_DAR] = dma_device_address[dmanr]; + } else { + /* Destination incrementing, must be memory */ + dmalp[MCFDMA_DAR] = a; + /* Set source address, must be device */ + dmalp[MCFDMA_SAR] = dma_device_address[dmanr]; + } + +#ifdef DEBUG_DMA + printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", + __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR], + (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR], + (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]); +#endif +} + +/* + * Specific for Coldfire - sets device address. + * Should be called after the mode set call, and before set DMA address. + */ +static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) +{ +#ifdef DMA_DEBUG + printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); +#endif + + dma_device_address[dmanr] = a; +} + +/* + * NOTE 2: "count" represents _bytes_. + */ +static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) +{ + volatile unsigned short *dmawp; + +#ifdef DMA_DEBUG + printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + dmawp[MCFDMA_BCR] = (unsigned short)count; +} + +/* + * Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * Otherwise, it returns the number of _bytes_ left to transfer. + */ +static __inline__ int get_dma_residue(unsigned int dmanr) +{ + volatile unsigned short *dmawp; + unsigned short count; + +#ifdef DMA_DEBUG + printk("get_dma_residue(dmanr=%d)\n", dmanr); +#endif + + dmawp = (unsigned short *) dma_base_addr[dmanr]; + count = dmawp[MCFDMA_BCR]; + return((int) count); +} +#else /* CONFIG_M5272 is defined */ + +/* + * The MCF5272 DMA controller is very different than the controller defined above + * in terms of register mapping. For instance, with the exception of the 16-bit + * interrupt register (IRQ#85, for reference), all of the registers are 32-bit. + * + * The big difference, however, is the lack of device-requested DMA. All modes + * are dual address transfer, and there is no 'device' setup or direction bit. + * You can DMA between a device and memory, between memory and memory, or even between + * two devices directly, with any combination of incrementing and non-incrementing + * addresses you choose. This puts a crimp in distinguishing between the 'device + * address' set up by set_dma_device_addr. + * + * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr, + * which will act exactly as above in -- it will look to see if the source is set to + * autoincrement, and if so it will make the source use the set_dma_addr value and the + * destination the set_dma_device_addr value. Otherwise the source will be set to the + * set_dma_device_addr value and the destination will get the set_dma_addr value. + * + * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions + * and make it explicit. Depending on what you're doing, one of these two should work + * for you, but don't mix them in the same transfer setup. + */ + +/* enable/disable a specific DMA channel */ +static __inline__ void enable_dma(unsigned int dmanr) +{ + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("enable_dma(dmanr=%d)\n", dmanr); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN; +} + +static __inline__ void disable_dma(unsigned int dmanr) +{ + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("disable_dma(dmanr=%d)\n", dmanr); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + + /* Turn off external requests, and stop any DMA in progress */ + dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN; + dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; +} + +/* + * Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while interrupts are disabled! --- + * + * This is a NOP for ColdFire. Provide a stub for compatibility. + */ +static __inline__ void clear_dma_ff(unsigned int dmanr) +{ +} + +/* set mode (above) for a specific DMA channel */ +static __inline__ void set_dma_mode(unsigned int dmanr, char mode) +{ + + volatile unsigned int *dmalp; + volatile unsigned short *dmawp; + +#ifdef DMA_DEBUG + printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); +#endif + dmalp = (unsigned int *) dma_base_addr[dmanr]; + dmawp = (unsigned short *) dma_base_addr[dmanr]; + + /* Clear config errors */ + dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; + + /* Set command register */ + dmalp[MCFDMA_DMR] = + MCFDMA_DMR_RQM_DUAL | /* Mandatory Request Mode setting */ + MCFDMA_DMR_DSTT_SD | /* Set up addressing types; set to supervisor-data. */ + MCFDMA_DMR_SRCT_SD | /* Set up addressing types; set to supervisor-data. */ + /* source static-address-mode */ + ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) | + /* dest static-address-mode */ + ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) | + /* burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 */ + (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) | + (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF); + + dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */ + +#ifdef DEBUG_DMA + printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__, + dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR], + (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]); +#endif +} + +/* Set transfer address for specific DMA channel */ +static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) +{ + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + + /* Determine which address registers are used for memory/device accesses */ + if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) { + /* Source incrementing, must be memory */ + dmalp[MCFDMA_DSAR] = a; + /* Set dest address, must be device */ + dmalp[MCFDMA_DDAR] = dma_device_address[dmanr]; + } else { + /* Destination incrementing, must be memory */ + dmalp[MCFDMA_DDAR] = a; + /* Set source address, must be device */ + dmalp[MCFDMA_DSAR] = dma_device_address[dmanr]; + } + +#ifdef DEBUG_DMA + printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", + __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR], + (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR], + (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]); +#endif +} + +/* + * Specific for Coldfire - sets device address. + * Should be called after the mode set call, and before set DMA address. + */ +static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) +{ +#ifdef DMA_DEBUG + printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); +#endif + + dma_device_address[dmanr] = a; +} + +/* + * NOTE 2: "count" represents _bytes_. + * + * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value. + */ +static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) +{ + volatile unsigned int *dmalp; + +#ifdef DMA_DEBUG + printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + dmalp[MCFDMA_DBCR] = count; +} + +/* + * Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * Otherwise, it returns the number of _bytes_ left to transfer. + */ +static __inline__ int get_dma_residue(unsigned int dmanr) +{ + volatile unsigned int *dmalp; + unsigned int count; + +#ifdef DMA_DEBUG + printk("get_dma_residue(dmanr=%d)\n", dmanr); +#endif + + dmalp = (unsigned int *) dma_base_addr[dmanr]; + count = dmalp[MCFDMA_DBCR]; + return(count); +} + +#endif /* !defined(CONFIG_M5272) */ +#endif /* CONFIG_COLDFIRE */ + +/* it's useless on the m68k, but unfortunately needed by the new + bootmem allocator (but this should do it for this) */ +#define MAX_DMA_ADDRESS PAGE_OFFSET + +#define MAX_DMA_CHANNELS 8 + +extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ +extern void free_dma(unsigned int dmanr); /* release it again */ + +#define isa_dma_bridge_buggy (0) + +#endif /* _M68K_DMA_H */ diff --git a/arch/m68k/include/asm/dma_mm.h b/arch/m68k/include/asm/dma_mm.h deleted file mode 100644 index 4240fbc..0000000 --- a/arch/m68k/include/asm/dma_mm.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _M68K_DMA_H -#define _M68K_DMA_H 1 - - -/* it's useless on the m68k, but unfortunately needed by the new - bootmem allocator (but this should do it for this) */ -#define MAX_DMA_ADDRESS PAGE_OFFSET - -#define MAX_DMA_CHANNELS 8 - -extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -#define isa_dma_bridge_buggy (0) - -#endif /* _M68K_DMA_H */ diff --git a/arch/m68k/include/asm/dma_no.h b/arch/m68k/include/asm/dma_no.h deleted file mode 100644 index 939a020..0000000 --- a/arch/m68k/include/asm/dma_no.h +++ /dev/null @@ -1,494 +0,0 @@ -#ifndef _M68K_DMA_H -#define _M68K_DMA_H 1 - -//#define DMA_DEBUG 1 - - -#ifdef CONFIG_COLDFIRE -/* - * ColdFire DMA Model: - * ColdFire DMA supports two forms of DMA: Single and Dual address. Single - * address mode emits a source address, and expects that the device will either - * pick up the data (DMA READ) or source data (DMA WRITE). This implies that - * the device will place data on the correct byte(s) of the data bus, as the - * memory transactions are always 32 bits. This implies that only 32 bit - * devices will find single mode transfers useful. Dual address DMA mode - * performs two cycles: source read and destination write. ColdFire will - * align the data so that the device will always get the correct bytes, thus - * is useful for 8 and 16 bit devices. This is the mode that is supported - * below. - * - * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 - * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) - * - * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000 - * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) - * - * APR/18/2002 : added proper support for MCF5272 DMA controller. - * Arthur Shipkowski (art@videon-central.com) - */ - -#include <asm/coldfire.h> -#include <asm/mcfsim.h> -#include <asm/mcfdma.h> - -/* - * Set number of channels of DMA on ColdFire for different implementations. - */ -#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \ - defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) -#define MAX_M68K_DMA_CHANNELS 4 -#elif defined(CONFIG_M5272) -#define MAX_M68K_DMA_CHANNELS 1 -#elif defined(CONFIG_M532x) -#define MAX_M68K_DMA_CHANNELS 0 -#else -#define MAX_M68K_DMA_CHANNELS 2 -#endif - -extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS]; -extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; - -#if !defined(CONFIG_M5272) -#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */ -#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */ -#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */ -#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */ - -/* I/O to memory, 8 bits, mode */ -#define DMA_MODE_READ 0 -/* memory to I/O, 8 bits, mode */ -#define DMA_MODE_WRITE 1 -/* I/O to memory, 16 bits, mode */ -#define DMA_MODE_READ_WORD 2 -/* memory to I/O, 16 bits, mode */ -#define DMA_MODE_WRITE_WORD 3 -/* I/O to memory, 32 bits, mode */ -#define DMA_MODE_READ_LONG 4 -/* memory to I/O, 32 bits, mode */ -#define DMA_MODE_WRITE_LONG 5 -/* I/O to memory, 8 bits, single-address-mode */ -#define DMA_MODE_READ_SINGLE 8 -/* memory to I/O, 8 bits, single-address-mode */ -#define DMA_MODE_WRITE_SINGLE 9 -/* I/O to memory, 16 bits, single-address-mode */ -#define DMA_MODE_READ_WORD_SINGLE 10 -/* memory to I/O, 16 bits, single-address-mode */ -#define DMA_MODE_WRITE_WORD_SINGLE 11 -/* I/O to memory, 32 bits, single-address-mode */ -#define DMA_MODE_READ_LONG_SINGLE 12 -/* memory to I/O, 32 bits, single-address-mode */ -#define DMA_MODE_WRITE_LONG_SINGLE 13 - -#else /* CONFIG_M5272 is defined */ - -/* Source static-address mode */ -#define DMA_MODE_SRC_SA_BIT 0x01 -/* Two bits to select between all four modes */ -#define DMA_MODE_SSIZE_MASK 0x06 -/* Offset to shift bits in */ -#define DMA_MODE_SSIZE_OFF 0x01 -/* Destination static-address mode */ -#define DMA_MODE_DES_SA_BIT 0x10 -/* Two bits to select between all four modes */ -#define DMA_MODE_DSIZE_MASK 0x60 -/* Offset to shift bits in */ -#define DMA_MODE_DSIZE_OFF 0x05 -/* Size modifiers */ -#define DMA_MODE_SIZE_LONG 0x00 -#define DMA_MODE_SIZE_BYTE 0x01 -#define DMA_MODE_SIZE_WORD 0x02 -#define DMA_MODE_SIZE_LINE 0x03 - -/* - * Aliases to help speed quick ports; these may be suboptimal, however. They - * do not include the SINGLE mode modifiers since the MCF5272 does not have a - * mode where the device is in control of its addressing. - */ - -/* I/O to memory, 8 bits, mode */ -#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 8 bits, mode */ -#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) -/* I/O to memory, 16 bits, mode */ -#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 16 bits, mode */ -#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) -/* I/O to memory, 32 bits, mode */ -#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 32 bits, mode */ -#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) - -#endif /* !defined(CONFIG_M5272) */ - -#if !defined(CONFIG_M5272) -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("enable_dma(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT; -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - volatile unsigned char *dmapb; - -#ifdef DMA_DEBUG - printk("disable_dma(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmapb = (unsigned char *) dma_base_addr[dmanr]; - - /* Turn off external requests, and stop any DMA in progress */ - dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT; - dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE; -} - -/* - * Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while interrupts are disabled! --- - * - * This is a NOP for ColdFire. Provide a stub for compatibility. - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - - volatile unsigned char *dmabp; - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); -#endif - - dmabp = (unsigned char *) dma_base_addr[dmanr]; - dmawp = (unsigned short *) dma_base_addr[dmanr]; - - // Clear config errors - dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; - - // Set command register - dmawp[MCFDMA_DCR] = - MCFDMA_DCR_INT | // Enable completion irq - MCFDMA_DCR_CS | // Force one xfer per request - MCFDMA_DCR_AA | // Enable auto alignment - // single-address-mode - ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) | - // sets s_rw (-> r/w) high if Memory to I/0 - ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) | - // Memory to I/O or I/O to Memory - ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) | - // 32 bit, 16 bit or 8 bit transfers - ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD : - ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG : - MCFDMA_DCR_SSIZE_BYTE)) | - ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD : - ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG : - MCFDMA_DCR_DSIZE_BYTE)); - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__, - dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR], - (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]); -#endif -} - -/* Set transfer address for specific DMA channel */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - volatile unsigned short *dmawp; - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - // Determine which address registers are used for memory/device accesses - if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) { - // Source incrementing, must be memory - dmalp[MCFDMA_SAR] = a; - // Set dest address, must be device - dmalp[MCFDMA_DAR] = dma_device_address[dmanr]; - } else { - // Destination incrementing, must be memory - dmalp[MCFDMA_DAR] = a; - // Set source address, must be device - dmalp[MCFDMA_SAR] = dma_device_address[dmanr]; - } - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", - __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR], - (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR], - (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]); -#endif -} - -/* - * Specific for Coldfire - sets device address. - * Should be called after the mode set call, and before set DMA address. - */ -static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) -{ -#ifdef DMA_DEBUG - printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dma_device_address[dmanr] = a; -} - -/* - * NOTE 2: "count" represents _bytes_. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmawp[MCFDMA_BCR] = (unsigned short)count; -} - -/* - * Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * Otherwise, it returns the number of _bytes_ left to transfer. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - unsigned short count; - -#ifdef DMA_DEBUG - printk("get_dma_residue(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - count = dmawp[MCFDMA_BCR]; - return((int) count); -} -#else /* CONFIG_M5272 is defined */ - -/* - * The MCF5272 DMA controller is very different than the controller defined above - * in terms of register mapping. For instance, with the exception of the 16-bit - * interrupt register (IRQ#85, for reference), all of the registers are 32-bit. - * - * The big difference, however, is the lack of device-requested DMA. All modes - * are dual address transfer, and there is no 'device' setup or direction bit. - * You can DMA between a device and memory, between memory and memory, or even between - * two devices directly, with any combination of incrementing and non-incrementing - * addresses you choose. This puts a crimp in distinguishing between the 'device - * address' set up by set_dma_device_addr. - * - * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr, - * which will act exactly as above in -- it will look to see if the source is set to - * autoincrement, and if so it will make the source use the set_dma_addr value and the - * destination the set_dma_device_addr value. Otherwise the source will be set to the - * set_dma_device_addr value and the destination will get the set_dma_addr value. - * - * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions - * and make it explicit. Depending on what you're doing, one of these two should work - * for you, but don't mix them in the same transfer setup. - */ - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("enable_dma(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN; -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("disable_dma(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - /* Turn off external requests, and stop any DMA in progress */ - dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN; - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; -} - -/* - * Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while interrupts are disabled! --- - * - * This is a NOP for ColdFire. Provide a stub for compatibility. - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - - volatile unsigned int *dmalp; - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); -#endif - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmawp = (unsigned short *) dma_base_addr[dmanr]; - - // Clear config errors - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; - - // Set command register - dmalp[MCFDMA_DMR] = - MCFDMA_DMR_RQM_DUAL | // Mandatory Request Mode setting - MCFDMA_DMR_DSTT_SD | // Set up addressing types; set to supervisor-data. - MCFDMA_DMR_SRCT_SD | // Set up addressing types; set to supervisor-data. - // source static-address-mode - ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) | - // dest static-address-mode - ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) | - // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 - (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) | - (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF); - - dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */ - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__, - dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR], - (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]); -#endif -} - -/* Set transfer address for specific DMA channel */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - // Determine which address registers are used for memory/device accesses - if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) { - // Source incrementing, must be memory - dmalp[MCFDMA_DSAR] = a; - // Set dest address, must be device - dmalp[MCFDMA_DDAR] = dma_device_address[dmanr]; - } else { - // Destination incrementing, must be memory - dmalp[MCFDMA_DDAR] = a; - // Set source address, must be device - dmalp[MCFDMA_DSAR] = dma_device_address[dmanr]; - } - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", - __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR], - (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR], - (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]); -#endif -} - -/* - * Specific for Coldfire - sets device address. - * Should be called after the mode set call, and before set DMA address. - */ -static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) -{ -#ifdef DMA_DEBUG - printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dma_device_address[dmanr] = a; -} - -/* - * NOTE 2: "count" represents _bytes_. - * - * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmalp[MCFDMA_DBCR] = count; -} - -/* - * Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * Otherwise, it returns the number of _bytes_ left to transfer. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - unsigned int count; - -#ifdef DMA_DEBUG - printk("get_dma_residue(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - count = dmalp[MCFDMA_DBCR]; - return(count); -} - -#endif /* !defined(CONFIG_M5272) */ -#endif /* CONFIG_COLDFIRE */ - -#define MAX_DMA_CHANNELS 8 - -/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any - occurrence should be flagged as an error. */ -/* under 2.4 it is actually needed by the new bootmem allocator */ -#define MAX_DMA_ADDRESS PAGE_OFFSET - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -#endif /* _M68K_DMA_H */ diff --git a/arch/m68k/include/asm/elia.h b/arch/m68k/include/asm/elia.h deleted file mode 100644 index e037d4e..0000000 --- a/arch/m68k/include/asm/elia.h +++ /dev/null @@ -1,41 +0,0 @@ -/****************************************************************************/ - -/* - * elia.h -- Lineo (formerly Moreton Bay) eLIA platform support. - * - * (C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au) - * (C) Copyright 1999-2000, Lineo (www.lineo.com) - */ - -/****************************************************************************/ -#ifndef elia_h -#define elia_h -/****************************************************************************/ - -#include <asm/coldfire.h> - -#ifdef CONFIG_eLIA - -/* - * The serial port DTR and DCD lines are also on the Parallel I/O - * as well, so define those too. - */ - -#define eLIA_DCD1 0x0001 -#define eLIA_DCD0 0x0002 -#define eLIA_DTR1 0x0004 -#define eLIA_DTR0 0x0008 - -#define eLIA_PCIRESET 0x0020 - -/* - * Kernel macros to set and unset the LEDs. - */ -#ifndef __ASSEMBLY__ -extern unsigned short ppdata; -#endif /* __ASSEMBLY__ */ - -#endif /* CONFIG_eLIA */ - -/****************************************************************************/ -#endif /* elia_h */ diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h new file mode 100644 index 0000000..283214d --- /dev/null +++ b/arch/m68k/include/asm/gpio.h @@ -0,0 +1,238 @@ +/* + * Coldfire generic GPIO support + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#ifndef coldfire_gpio_h +#define coldfire_gpio_h + +#include <linux/io.h> +#include <asm-generic/gpio.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> + +/* + * The Freescale Coldfire family is quite varied in how they implement GPIO. + * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have + * only one port, others have multiple ports; some have a single data latch + * for both input and output, others have a separate pin data register to read + * input; some require a read-modify-write access to change an output, others + * have set and clear registers for some of the outputs; Some have all the + * GPIOs in a single control area, others have some GPIOs implemented in + * different modules. + * + * This implementation attempts accomodate the differences while presenting + * a generic interface that will optimize to as few instructions as possible. + */ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x) + +/* These parts have GPIO organized by 8 bit ports */ + +#define MCFGPIO_PORTTYPE u8 +#define MCFGPIO_PORTSIZE 8 +#define mcfgpio_read(port) __raw_readb(port) +#define mcfgpio_write(data, port) __raw_writeb(data, port) + +#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272) + +/* These parts have GPIO organized by 16 bit ports */ + +#define MCFGPIO_PORTTYPE u16 +#define MCFGPIO_PORTSIZE 16 +#define mcfgpio_read(port) __raw_readw(port) +#define mcfgpio_write(data, port) __raw_writew(data, port) + +#elif defined(CONFIG_M5249) + +/* These parts have GPIO organized by 32 bit ports */ + +#define MCFGPIO_PORTTYPE u32 +#define MCFGPIO_PORTSIZE 32 +#define mcfgpio_read(port) __raw_readl(port) +#define mcfgpio_write(data, port) __raw_writel(data, port) + +#endif + +#define mcfgpio_bit(gpio) (1 << ((gpio) % MCFGPIO_PORTSIZE)) +#define mcfgpio_port(gpio) ((gpio) / MCFGPIO_PORTSIZE) + +#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x) +/* + * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses + * read-modify-write to change an output and a GPIO module which has separate + * set/clr registers to directly change outputs with a single write access. + */ +#if defined(CONFIG_M528x) +/* + * The 528x also has GPIOs in other modules (GPT, QADC) which use + * read-modify-write as well as those controlled by the EPORT and GPIO modules. + */ +#define MCFGPIO_SCR_START 40 +#else +#define MCFGPIO_SCR_START 8 +#endif + +#define MCFGPIO_SETR_PORT(gpio) (MCFGPIO_SETR + \ + mcfgpio_port(gpio - MCFGPIO_SCR_START)) + +#define MCFGPIO_CLRR_PORT(gpio) (MCFGPIO_CLRR + \ + mcfgpio_port(gpio - MCFGPIO_SCR_START)) +#else + +#define MCFGPIO_SCR_START MCFGPIO_PIN_MAX +/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */ +#define MCFGPIO_SETR_PORT(gpio) 0 +#define MCFGPIO_CLRR_PORT(gpio) 0 + +#endif +/* + * Coldfire specific helper functions + */ + +/* return the port pin data register for a gpio */ +static inline u32 __mcf_gpio_ppdr(unsigned gpio) +{ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M5307) || defined(CONFIG_M5407) + return MCFSIM_PADAT; +#elif defined(CONFIG_M5272) + if (gpio < 16) + return MCFSIM_PADAT; + else if (gpio < 32) + return MCFSIM_PBDAT; + else + return MCFSIM_PCDAT; +#elif defined(CONFIG_M5249) + if (gpio < 32) + return MCFSIM2_GPIOREAD; + else + return MCFSIM2_GPIO1READ; +#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x) + if (gpio < 8) + return MCFEPORT_EPPDR; +#if defined(CONFIG_M528x) + else if (gpio < 16) + return MCFGPTA_GPTPORT; + else if (gpio < 24) + return MCFGPTB_GPTPORT; + else if (gpio < 32) + return MCFQADC_PORTQA; + else if (gpio < 40) + return MCFQADC_PORTQB; +#endif + else + return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START); +#endif +} + +/* return the port output data register for a gpio */ +static inline u32 __mcf_gpio_podr(unsigned gpio) +{ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M5307) || defined(CONFIG_M5407) + return MCFSIM_PADAT; +#elif defined(CONFIG_M5272) + if (gpio < 16) + return MCFSIM_PADAT; + else if (gpio < 32) + return MCFSIM_PBDAT; + else + return MCFSIM_PCDAT; +#elif defined(CONFIG_M5249) + if (gpio < 32) + return MCFSIM2_GPIOWRITE; + else + return MCFSIM2_GPIO1WRITE; +#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x) + if (gpio < 8) + return MCFEPORT_EPDR; +#if defined(CONFIG_M528x) + else if (gpio < 16) + return MCFGPTA_GPTPORT; + else if (gpio < 24) + return MCFGPTB_GPTPORT; + else if (gpio < 32) + return MCFQADC_PORTQA; + else if (gpio < 40) + return MCFQADC_PORTQB; +#endif + else + return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START); +#endif +} + +/* + * The Generic GPIO functions + * + * If the gpio is a compile time constant and is one of the Coldfire gpios, + * use the inline version, otherwise dispatch thru gpiolib. + */ + +static inline int gpio_get_value(unsigned gpio) +{ + if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) + return mcfgpio_read(__mcf_gpio_ppdr(gpio)) & mcfgpio_bit(gpio); + else + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) { + if (gpio < MCFGPIO_SCR_START) { + unsigned long flags; + MCFGPIO_PORTTYPE data; + + local_irq_save(flags); + data = mcfgpio_read(__mcf_gpio_podr(gpio)); + if (value) + data |= mcfgpio_bit(gpio); + else + data &= ~mcfgpio_bit(gpio); + mcfgpio_write(data, __mcf_gpio_podr(gpio)); + local_irq_restore(flags); + } else { + if (value) + mcfgpio_write(mcfgpio_bit(gpio), + MCFGPIO_SETR_PORT(gpio)); + else + mcfgpio_write(~mcfgpio_bit(gpio), + MCFGPIO_CLRR_PORT(gpio)); + } + } else + __gpio_set_value(gpio, value); +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE : -EINVAL; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return (irq >= MCFGPIO_IRQ_VECBASE && + irq < (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) ? + irq - MCFGPIO_IRQ_VECBASE : -ENXIO; +} + +static inline int gpio_cansleep(unsigned gpio) +{ + return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio); +} + +#endif diff --git a/arch/m68k/include/asm/hardirq_no.h b/arch/m68k/include/asm/hardirq_no.h index bfad281..b44b14b 100644 --- a/arch/m68k/include/asm/hardirq_no.h +++ b/arch/m68k/include/asm/hardirq_no.h @@ -1,16 +1,8 @@ #ifndef __M68K_HARDIRQ_H #define __M68K_HARDIRQ_H -#include <linux/cache.h> -#include <linux/threads.h> #include <asm/irq.h> -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - #define HARDIRQ_BITS 8 /* @@ -22,6 +14,6 @@ typedef struct { # error HARDIRQ_BITS is too low! #endif -void ack_bad_irq(unsigned int irq); +#include <asm-generic/hardirq.h> #endif /* __M68K_HARDIRQ_H */ diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h index 6adef1e..7f57436 100644 --- a/arch/m68k/include/asm/io_no.h +++ b/arch/m68k/include/asm/io_no.h @@ -134,7 +134,7 @@ static inline void io_insl(unsigned int addr, void *buf, int len) #define insw(a,b,l) io_insw(a,b,l) #define insl(a,b,l) io_insl(a,b,l) -#define IO_SPACE_LIMIT 0xffff +#define IO_SPACE_LIMIT 0xffffffff /* Values for nocacheflag and cmode */ diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index d031416..907eff1 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -1,5 +1,134 @@ -#ifdef __uClinux__ -#include "irq_no.h" +#ifndef _M68K_IRQ_H_ +#define _M68K_IRQ_H_ + +/* + * This should be the same as the max(NUM_X_SOURCES) for all the + * different m68k hosts compiled into the kernel. + * Currently the Atari has 72 and the Amiga 24, but if both are + * supported in the kernel it is better to make room for 72. + */ +#if defined(CONFIG_COLDFIRE) +#define NR_IRQS 256 +#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X) +#define NR_IRQS 200 +#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) +#define NR_IRQS 72 +#elif defined(CONFIG_Q40) +#define NR_IRQS 43 +#elif defined(CONFIG_AMIGA) || !defined(CONFIG_MMU) +#define NR_IRQS 32 +#elif defined(CONFIG_APOLLO) +#define NR_IRQS 24 +#elif defined(CONFIG_HP300) +#define NR_IRQS 8 #else -#include "irq_mm.h" +#define NR_IRQS 0 #endif + +#ifdef CONFIG_MMU + +#include <linux/linkage.h> +#include <linux/hardirq.h> +#include <linux/irqreturn.h> +#include <linux/spinlock_types.h> + +/* + * The hardirq mask has to be large enough to have + * space for potentially all IRQ sources in the system + * nesting on a single CPU: + */ +#if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +#endif + +/* + * Interrupt source definitions + * General interrupt sources are the level 1-7. + * Adding an interrupt service routine for one of these sources + * results in the addition of that routine to a chain of routines. + * Each one is called in succession. Each individual interrupt + * service routine should determine if the device associated with + * that routine requires service. + */ + +#define IRQ_SPURIOUS 0 + +#define IRQ_AUTO_1 1 /* level 1 interrupt */ +#define IRQ_AUTO_2 2 /* level 2 interrupt */ +#define IRQ_AUTO_3 3 /* level 3 interrupt */ +#define IRQ_AUTO_4 4 /* level 4 interrupt */ +#define IRQ_AUTO_5 5 /* level 5 interrupt */ +#define IRQ_AUTO_6 6 /* level 6 interrupt */ +#define IRQ_AUTO_7 7 /* level 7 interrupt (non-maskable) */ + +#define IRQ_USER 8 + +extern unsigned int irq_canonicalize(unsigned int irq); + +struct pt_regs; + +/* + * various flags for request_irq() - the Amiga now uses the standard + * mechanism like all other architectures - IRQF_DISABLED and + * IRQF_SHARED are your friends. + */ +#ifndef MACH_AMIGA_ONLY +#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */ +#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */ +#define IRQ_FLG_FAST (0x0004) +#define IRQ_FLG_SLOW (0x0008) +#define IRQ_FLG_STD (0x8000) /* internally used */ +#endif + +/* + * This structure is used to chain together the ISRs for a particular + * interrupt source (if it supports chaining). + */ +typedef struct irq_node { + irqreturn_t (*handler)(int, void *); + void *dev_id; + struct irq_node *next; + unsigned long flags; + const char *devname; +} irq_node_t; + +/* + * This structure has only 4 elements for speed reasons + */ +struct irq_handler { + int (*handler)(int, void *); + unsigned long flags; + void *dev_id; + const char *devname; +}; + +struct irq_controller { + const char *name; + spinlock_t lock; + int (*startup)(unsigned int irq); + void (*shutdown)(unsigned int irq); + void (*enable)(unsigned int irq); + void (*disable)(unsigned int irq); +}; + +extern int m68k_irq_startup(unsigned int); +extern void m68k_irq_shutdown(unsigned int); + +/* + * This function returns a new irq_node_t + */ +extern irq_node_t *new_irq_node(void); + +extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); +extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, + void (*handler)(unsigned int, struct pt_regs *)); +extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int); + +asmlinkage void m68k_handle_int(unsigned int); +asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); + +#else +#define irq_canonicalize(irq) (irq) +#endif /* CONFIG_MMU */ + +#endif /* _M68K_IRQ_H_ */ diff --git a/arch/m68k/include/asm/irq_mm.h b/arch/m68k/include/asm/irq_mm.h deleted file mode 100644 index 0cab42c..0000000 --- a/arch/m68k/include/asm/irq_mm.h +++ /dev/null @@ -1,126 +0,0 @@ -#ifndef _M68K_IRQ_H_ -#define _M68K_IRQ_H_ - -#include <linux/linkage.h> -#include <linux/hardirq.h> -#include <linux/irqreturn.h> -#include <linux/spinlock_types.h> - -/* - * This should be the same as the max(NUM_X_SOURCES) for all the - * different m68k hosts compiled into the kernel. - * Currently the Atari has 72 and the Amiga 24, but if both are - * supported in the kernel it is better to make room for 72. - */ -#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X) -#define NR_IRQS 200 -#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) -#define NR_IRQS 72 -#elif defined(CONFIG_Q40) -#define NR_IRQS 43 -#elif defined(CONFIG_AMIGA) -#define NR_IRQS 32 -#elif defined(CONFIG_APOLLO) -#define NR_IRQS 24 -#elif defined(CONFIG_HP300) -#define NR_IRQS 8 -#else -#define NR_IRQS 0 -#endif - -/* - * The hardirq mask has to be large enough to have - * space for potentially all IRQ sources in the system - * nesting on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - -/* - * Interrupt source definitions - * General interrupt sources are the level 1-7. - * Adding an interrupt service routine for one of these sources - * results in the addition of that routine to a chain of routines. - * Each one is called in succession. Each individual interrupt - * service routine should determine if the device associated with - * that routine requires service. - */ - -#define IRQ_SPURIOUS 0 - -#define IRQ_AUTO_1 1 /* level 1 interrupt */ -#define IRQ_AUTO_2 2 /* level 2 interrupt */ -#define IRQ_AUTO_3 3 /* level 3 interrupt */ -#define IRQ_AUTO_4 4 /* level 4 interrupt */ -#define IRQ_AUTO_5 5 /* level 5 interrupt */ -#define IRQ_AUTO_6 6 /* level 6 interrupt */ -#define IRQ_AUTO_7 7 /* level 7 interrupt (non-maskable) */ - -#define IRQ_USER 8 - -extern unsigned int irq_canonicalize(unsigned int irq); - -struct pt_regs; - -/* - * various flags for request_irq() - the Amiga now uses the standard - * mechanism like all other architectures - IRQF_DISABLED and - * IRQF_SHARED are your friends. - */ -#ifndef MACH_AMIGA_ONLY -#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */ -#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */ -#define IRQ_FLG_FAST (0x0004) -#define IRQ_FLG_SLOW (0x0008) -#define IRQ_FLG_STD (0x8000) /* internally used */ -#endif - -/* - * This structure is used to chain together the ISRs for a particular - * interrupt source (if it supports chaining). - */ -typedef struct irq_node { - irqreturn_t (*handler)(int, void *); - void *dev_id; - struct irq_node *next; - unsigned long flags; - const char *devname; -} irq_node_t; - -/* - * This structure has only 4 elements for speed reasons - */ -struct irq_handler { - int (*handler)(int, void *); - unsigned long flags; - void *dev_id; - const char *devname; -}; - -struct irq_controller { - const char *name; - spinlock_t lock; - int (*startup)(unsigned int irq); - void (*shutdown)(unsigned int irq); - void (*enable)(unsigned int irq); - void (*disable)(unsigned int irq); -}; - -extern int m68k_irq_startup(unsigned int); -extern void m68k_irq_shutdown(unsigned int); - -/* - * This function returns a new irq_node_t - */ -extern irq_node_t *new_irq_node(void); - -extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, - void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int); - -asmlinkage void m68k_handle_int(unsigned int); -asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); - -#endif /* _M68K_IRQ_H_ */ diff --git a/arch/m68k/include/asm/irq_no.h b/arch/m68k/include/asm/irq_no.h deleted file mode 100644 index 9373c31..0000000 --- a/arch/m68k/include/asm/irq_no.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _M68KNOMMU_IRQ_H_ -#define _M68KNOMMU_IRQ_H_ - -#ifdef CONFIG_COLDFIRE -/* - * On the ColdFire we keep track of all vectors. That way drivers - * can register whatever vector number they wish, and we can deal - * with it. - */ -#define SYS_IRQS 256 -#define NR_IRQS SYS_IRQS - -#else - -/* - * # of m68k interrupts - */ -#define SYS_IRQS 8 -#define NR_IRQS (24 + SYS_IRQS) - -#endif /* CONFIG_COLDFIRE */ - - -#define irq_canonicalize(irq) (irq) - -#endif /* _M68KNOMMU_IRQ_H_ */ diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h index 7e3594d..9c384e2 100644 --- a/arch/m68k/include/asm/m5206sim.h +++ b/arch/m68k/include/asm/m5206sim.h @@ -85,8 +85,21 @@ #define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */ #endif -#define MCFSIM_PADDR 0x1c5 /* Parallel Direction (r/w) */ -#define MCFSIM_PADAT 0x1c9 /* Parallel Port Value (r/w) */ +#define MCFSIM_PADDR (MCF_MBAR + 0x1c5) /* Parallel Direction (r/w) */ +#define MCFSIM_PADAT (MCF_MBAR + 0x1c9) /* Parallel Port Value (r/w) */ + +/* + * Define system peripheral IRQ usage. + */ +#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ +#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ + +/* + * Generic GPIO + */ +#define MCFGPIO_PIN_MAX 8 +#define MCFGPIO_IRQ_VECBASE -1 +#define MCFGPIO_IRQ_MAX -1 /* * Some symbol defines for the Parallel Port Pin Assignment Register @@ -111,21 +124,5 @@ #define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */ #endif -#if defined(CONFIG_M5206e) -#define MCFSIM_IMR_MASKALL 0xfffe /* All SIM intr sources */ -#endif - -/* - * Macro to get and set IMR register. It is 16 bits on the 5206. - */ -#define mcf_getimr() \ - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr) - -#define mcf_getipr() \ - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR)) - /****************************************************************************/ #endif /* m5206sim_h */ diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h index 83bbcfd..ed2b69b 100644 --- a/arch/m68k/include/asm/m520xsim.h +++ b/arch/m68k/include/asm/m520xsim.h @@ -11,9 +11,8 @@ #define m520xsim_h /****************************************************************************/ - /* - * Define the 5282 SIM register set addresses. + * Define the 520x SIM register set addresses. */ #define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */ #define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ @@ -22,8 +21,22 @@ #define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ #define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ #define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ +#define MCFINTC_SIMR 0x1c /* Set interrupt mask 0-63 */ +#define MCFINTC_CIMR 0x1d /* Clear interrupt mask 0-63 */ #define MCFINTC_ICR0 0x40 /* Base ICR register */ +/* + * The common interrupt controller code just wants to know the absolute + * address to the SIMR and CIMR registers (not offsets into IPSBAR). + * The 520x family only has a single INTC unit. + */ +#define MCFINTC0_SIMR (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_SIMR) +#define MCFINTC0_CIMR (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_CIMR) +#define MCFINTC0_ICR0 (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0) +#define MCFINTC1_SIMR (0) +#define MCFINTC1_CIMR (0) +#define MCFINTC1_ICR0 (0) + #define MCFINT_VECBASE 64 #define MCFINT_UART0 26 /* Interrupt number for UART0 */ #define MCFINT_UART1 27 /* Interrupt number for UART1 */ @@ -41,6 +54,62 @@ #define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */ #define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */ +#define MCFEPORT_EPDDR 0xFC088002 +#define MCFEPORT_EPDR 0xFC088004 +#define MCFEPORT_EPPDR 0xFC088005 + +#define MCFGPIO_PODR_BUSCTL 0xFC0A4000 +#define MCFGPIO_PODR_BE 0xFC0A4001 +#define MCFGPIO_PODR_CS 0xFC0A4002 +#define MCFGPIO_PODR_FECI2C 0xFC0A4003 +#define MCFGPIO_PODR_QSPI 0xFC0A4004 +#define MCFGPIO_PODR_TIMER 0xFC0A4005 +#define MCFGPIO_PODR_UART 0xFC0A4006 +#define MCFGPIO_PODR_FECH 0xFC0A4007 +#define MCFGPIO_PODR_FECL 0xFC0A4008 + +#define MCFGPIO_PDDR_BUSCTL 0xFC0A400C +#define MCFGPIO_PDDR_BE 0xFC0A400D +#define MCFGPIO_PDDR_CS 0xFC0A400E +#define MCFGPIO_PDDR_FECI2C 0xFC0A400F +#define MCFGPIO_PDDR_QSPI 0xFC0A4010 +#define MCFGPIO_PDDR_TIMER 0xFC0A4011 +#define MCFGPIO_PDDR_UART 0xFC0A4012 +#define MCFGPIO_PDDR_FECH 0xFC0A4013 +#define MCFGPIO_PDDR_FECL 0xFC0A4014 + +#define MCFGPIO_PPDSDR_BUSCTL 0xFC0A401A +#define MCFGPIO_PPDSDR_BE 0xFC0A401B +#define MCFGPIO_PPDSDR_CS 0xFC0A401C +#define MCFGPIO_PPDSDR_FECI2C 0xFC0A401D +#define MCFGPIO_PPDSDR_QSPI 0xFC0A401E +#define MCFGPIO_PPDSDR_TIMER 0xFC0A401F +#define MCFGPIO_PPDSDR_UART 0xFC0A4021 +#define MCFGPIO_PPDSDR_FECH 0xFC0A4021 +#define MCFGPIO_PPDSDR_FECL 0xFC0A4022 + +#define MCFGPIO_PCLRR_BUSCTL 0xFC0A4024 +#define MCFGPIO_PCLRR_BE 0xFC0A4025 +#define MCFGPIO_PCLRR_CS 0xFC0A4026 +#define MCFGPIO_PCLRR_FECI2C 0xFC0A4027 +#define MCFGPIO_PCLRR_QSPI 0xFC0A4028 +#define MCFGPIO_PCLRR_TIMER 0xFC0A4029 +#define MCFGPIO_PCLRR_UART 0xFC0A402A +#define MCFGPIO_PCLRR_FECH 0xFC0A402B +#define MCFGPIO_PCLRR_FECL 0xFC0A402C +/* + * Generic GPIO support + */ +#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL +#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL +#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL +#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL + +#define MCFGPIO_PIN_MAX 80 +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +/****************************************************************************/ #define MCF_GPIO_PAR_UART (0xA4036) #define MCF_GPIO_PAR_FECI2C (0xA4033) @@ -55,10 +124,6 @@ #define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02) #define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) -#define ICR_INTRCONF 0x05 -#define MCFPIT_IMR MCFINTC_IMRL -#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1) - /* * Reset Controll Unit. */ diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h index 55183b5d..a34894c 100644 --- a/arch/m68k/include/asm/m523xsim.h +++ b/arch/m68k/include/asm/m523xsim.h @@ -50,5 +50,82 @@ #define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ +#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000) +#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001) +#define MCFGPIO_PODR_DATAL (MCF_IPSBAR + 0x100002) +#define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100003) +#define MCFGPIO_PODR_BS (MCF_IPSBAR + 0x100004) +#define MCFGPIO_PODR_CS (MCF_IPSBAR + 0x100005) +#define MCFGPIO_PODR_SDRAM (MCF_IPSBAR + 0x100006) +#define MCFGPIO_PODR_FECI2C (MCF_IPSBAR + 0x100007) +#define MCFGPIO_PODR_UARTH (MCF_IPSBAR + 0x100008) +#define MCFGPIO_PODR_UARTL (MCF_IPSBAR + 0x100009) +#define MCFGPIO_PODR_QSPI (MCF_IPSBAR + 0x10000A) +#define MCFGPIO_PODR_TIMER (MCF_IPSBAR + 0x10000B) +#define MCFGPIO_PODR_ETPU (MCF_IPSBAR + 0x10000C) + +#define MCFGPIO_PDDR_ADDR (MCF_IPSBAR + 0x100010) +#define MCFGPIO_PDDR_DATAH (MCF_IPSBAR + 0x100011) +#define MCFGPIO_PDDR_DATAL (MCF_IPSBAR + 0x100012) +#define MCFGPIO_PDDR_BUSCTL (MCF_IPSBAR + 0x100013) +#define MCFGPIO_PDDR_BS (MCF_IPSBAR + 0x100014) +#define MCFGPIO_PDDR_CS (MCF_IPSBAR + 0x100015) +#define MCFGPIO_PDDR_SDRAM (MCF_IPSBAR + 0x100016) +#define MCFGPIO_PDDR_FECI2C (MCF_IPSBAR + 0x100017) +#define MCFGPIO_PDDR_UARTH (MCF_IPSBAR + 0x100018) +#define MCFGPIO_PDDR_UARTL (MCF_IPSBAR + 0x100019) +#define MCFGPIO_PDDR_QSPI (MCF_IPSBAR + 0x10001A) +#define MCFGPIO_PDDR_TIMER (MCF_IPSBAR + 0x10001B) +#define MCFGPIO_PDDR_ETPU (MCF_IPSBAR + 0x10001C) + +#define MCFGPIO_PPDSDR_ADDR (MCF_IPSBAR + 0x100020) +#define MCFGPIO_PPDSDR_DATAH (MCF_IPSBAR + 0x100021) +#define MCFGPIO_PPDSDR_DATAL (MCF_IPSBAR + 0x100022) +#define MCFGPIO_PPDSDR_BUSCTL (MCF_IPSBAR + 0x100023) +#define MCFGPIO_PPDSDR_BS (MCF_IPSBAR + 0x100024) +#define MCFGPIO_PPDSDR_CS (MCF_IPSBAR + 0x100025) +#define MCFGPIO_PPDSDR_SDRAM (MCF_IPSBAR + 0x100026) +#define MCFGPIO_PPDSDR_FECI2C (MCF_IPSBAR + 0x100027) +#define MCFGPIO_PPDSDR_UARTH (MCF_IPSBAR + 0x100028) +#define MCFGPIO_PPDSDR_UARTL (MCF_IPSBAR + 0x100029) +#define MCFGPIO_PPDSDR_QSPI (MCF_IPSBAR + 0x10002A) +#define MCFGPIO_PPDSDR_TIMER (MCF_IPSBAR + 0x10002B) +#define MCFGPIO_PPDSDR_ETPU (MCF_IPSBAR + 0x10002C) + +#define MCFGPIO_PCLRR_ADDR (MCF_IPSBAR + 0x100030) +#define MCFGPIO_PCLRR_DATAH (MCF_IPSBAR + 0x100031) +#define MCFGPIO_PCLRR_DATAL (MCF_IPSBAR + 0x100032) +#define MCFGPIO_PCLRR_BUSCTL (MCF_IPSBAR + 0x100033) +#define MCFGPIO_PCLRR_BS (MCF_IPSBAR + 0x100034) +#define MCFGPIO_PCLRR_CS (MCF_IPSBAR + 0x100035) +#define MCFGPIO_PCLRR_SDRAM (MCF_IPSBAR + 0x100036) +#define MCFGPIO_PCLRR_FECI2C (MCF_IPSBAR + 0x100037) +#define MCFGPIO_PCLRR_UARTH (MCF_IPSBAR + 0x100038) +#define MCFGPIO_PCLRR_UARTL (MCF_IPSBAR + 0x100039) +#define MCFGPIO_PCLRR_QSPI (MCF_IPSBAR + 0x10003A) +#define MCFGPIO_PCLRR_TIMER (MCF_IPSBAR + 0x10003B) +#define MCFGPIO_PCLRR_ETPU (MCF_IPSBAR + 0x10003C) + +/* + * EPort + */ + +#define MCFEPORT_EPDDR (MCF_IPSBAR + 0x130002) +#define MCFEPORT_EPDR (MCF_IPSBAR + 0x130004) +#define MCFEPORT_EPPDR (MCF_IPSBAR + 0x130005) + +/* + * Generic GPIO support + */ +#define MCFGPIO_PODR MCFGPIO_PODR_ADDR +#define MCFGPIO_PDDR MCFGPIO_PDDR_ADDR +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_ADDR +#define MCFGPIO_SETR MCFGPIO_PPDSDR_ADDR +#define MCFGPIO_CLRR MCFGPIO_PCLRR_ADDR + +#define MCFGPIO_PIN_MAX 107 +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE + /****************************************************************************/ #endif /* m523xsim_h */ diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h index 366eb86..14bce87 100644 --- a/arch/m68k/include/asm/m5249sim.h +++ b/arch/m68k/include/asm/m5249sim.h @@ -71,16 +71,22 @@ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ /* + * Define system peripheral IRQ usage. + */ +#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ +#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ + +/* * General purpose IO registers (in MBAR2). */ -#define MCFSIM2_GPIOREAD 0x0 /* GPIO read values */ -#define MCFSIM2_GPIOWRITE 0x4 /* GPIO write values */ -#define MCFSIM2_GPIOENABLE 0x8 /* GPIO enabled */ -#define MCFSIM2_GPIOFUNC 0xc /* GPIO function */ -#define MCFSIM2_GPIO1READ 0xb0 /* GPIO1 read values */ -#define MCFSIM2_GPIO1WRITE 0xb4 /* GPIO1 write values */ -#define MCFSIM2_GPIO1ENABLE 0xb8 /* GPIO1 enabled */ -#define MCFSIM2_GPIO1FUNC 0xbc /* GPIO1 function */ +#define MCFSIM2_GPIOREAD (MCF_MBAR2 + 0x000) /* GPIO read values */ +#define MCFSIM2_GPIOWRITE (MCF_MBAR2 + 0x004) /* GPIO write values */ +#define MCFSIM2_GPIOENABLE (MCF_MBAR2 + 0x008) /* GPIO enabled */ +#define MCFSIM2_GPIOFUNC (MCF_MBAR2 + 0x00C) /* GPIO function */ +#define MCFSIM2_GPIO1READ (MCF_MBAR2 + 0x0B0) /* GPIO1 read values */ +#define MCFSIM2_GPIO1WRITE (MCF_MBAR2 + 0x0B4) /* GPIO1 write values */ +#define MCFSIM2_GPIO1ENABLE (MCF_MBAR2 + 0x0B8) /* GPIO1 enabled */ +#define MCFSIM2_GPIO1FUNC (MCF_MBAR2 + 0x0BC) /* GPIO1 function */ #define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */ #define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */ @@ -100,20 +106,28 @@ #define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */ #define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */ - /* - * Macro to set IMR register. It is 32 bits on the 5249. + * Define the base interrupt for the second interrupt controller. + * We set it to 128, out of the way of the base interrupts, and plenty + * of room for its 64 interrupts. */ -#define MCFSIM_IMR_MASKALL 0x7fffe /* All SIM intr sources */ +#define MCFINTC2_VECBASE 128 -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) +#define MCFINTC2_GPIOIRQ0 (MCFINTC2_VECBASE + 32) +#define MCFINTC2_GPIOIRQ1 (MCFINTC2_VECBASE + 33) +#define MCFINTC2_GPIOIRQ2 (MCFINTC2_VECBASE + 34) +#define MCFINTC2_GPIOIRQ3 (MCFINTC2_VECBASE + 35) +#define MCFINTC2_GPIOIRQ4 (MCFINTC2_VECBASE + 36) +#define MCFINTC2_GPIOIRQ5 (MCFINTC2_VECBASE + 37) +#define MCFINTC2_GPIOIRQ6 (MCFINTC2_VECBASE + 38) +#define MCFINTC2_GPIOIRQ7 (MCFINTC2_VECBASE + 39) -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) +/* + * Generic GPIO support + */ +#define MCFGPIO_PIN_MAX 64 +#define MCFGPIO_IRQ_MAX -1 +#define MCFGPIO_IRQ_VECBASE -1 /****************************************************************************/ @@ -137,9 +151,9 @@ subql #1,%a1 /* get MBAR2 address in a1 */ /* - * Move secondary interrupts to base at 128. + * Move secondary interrupts to their base (128). */ - moveb #0x80,%d0 + moveb #MCFINTC2_VECBASE,%d0 moveb %d0,0x16b(%a1) /* interrupt base register */ /* diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h index 6217edc..df3332c 100644 --- a/arch/m68k/include/asm/m5272sim.h +++ b/arch/m68k/include/asm/m5272sim.h @@ -12,7 +12,6 @@ #define m5272sim_h /****************************************************************************/ - /* * Define the 5272 SIM register set addresses. */ @@ -63,16 +62,59 @@ #define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ #define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ -#define MCFSIM_PACNT 0x80 /* Port A Control (r/w) */ -#define MCFSIM_PADDR 0x84 /* Port A Direction (r/w) */ -#define MCFSIM_PADAT 0x86 /* Port A Data (r/w) */ -#define MCFSIM_PBCNT 0x88 /* Port B Control (r/w) */ -#define MCFSIM_PBDDR 0x8c /* Port B Direction (r/w) */ -#define MCFSIM_PBDAT 0x8e /* Port B Data (r/w) */ -#define MCFSIM_PCDDR 0x94 /* Port C Direction (r/w) */ -#define MCFSIM_PCDAT 0x96 /* Port C Data (r/w) */ -#define MCFSIM_PDCNT 0x98 /* Port D Control (r/w) */ +#define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */ +#define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */ +#define MCFSIM_PADAT (MCF_MBAR + 0x86) /* Port A Data (r/w) */ +#define MCFSIM_PBCNT (MCF_MBAR + 0x88) /* Port B Control (r/w) */ +#define MCFSIM_PBDDR (MCF_MBAR + 0x8c) /* Port B Direction (r/w) */ +#define MCFSIM_PBDAT (MCF_MBAR + 0x8e) /* Port B Data (r/w) */ +#define MCFSIM_PCDDR (MCF_MBAR + 0x94) /* Port C Direction (r/w) */ +#define MCFSIM_PCDAT (MCF_MBAR + 0x96) /* Port C Data (r/w) */ +#define MCFSIM_PDCNT (MCF_MBAR + 0x98) /* Port D Control (r/w) */ + +/* + * Define system peripheral IRQ usage. + */ +#define MCFINT_VECBASE 64 /* Base of interrupts */ +#define MCF_IRQ_SPURIOUS 64 /* User Spurious */ +#define MCF_IRQ_EINT1 65 /* External Interrupt 1 */ +#define MCF_IRQ_EINT2 66 /* External Interrupt 2 */ +#define MCF_IRQ_EINT3 67 /* External Interrupt 3 */ +#define MCF_IRQ_EINT4 68 /* External Interrupt 4 */ +#define MCF_IRQ_TIMER1 69 /* Timer 1 */ +#define MCF_IRQ_TIMER2 70 /* Timer 2 */ +#define MCF_IRQ_TIMER3 71 /* Timer 3 */ +#define MCF_IRQ_TIMER4 72 /* Timer 4 */ +#define MCF_IRQ_UART1 73 /* UART 1 */ +#define MCF_IRQ_UART2 74 /* UART 2 */ +#define MCF_IRQ_PLIP 75 /* PLIC 2Khz Periodic */ +#define MCF_IRQ_PLIA 76 /* PLIC Asynchronous */ +#define MCF_IRQ_USB0 77 /* USB Endpoint 0 */ +#define MCF_IRQ_USB1 78 /* USB Endpoint 1 */ +#define MCF_IRQ_USB2 79 /* USB Endpoint 2 */ +#define MCF_IRQ_USB3 80 /* USB Endpoint 3 */ +#define MCF_IRQ_USB4 81 /* USB Endpoint 4 */ +#define MCF_IRQ_USB5 82 /* USB Endpoint 5 */ +#define MCF_IRQ_USB6 83 /* USB Endpoint 6 */ +#define MCF_IRQ_USB7 84 /* USB Endpoint 7 */ +#define MCF_IRQ_DMA 85 /* DMA Controller */ +#define MCF_IRQ_ERX 86 /* Ethernet Receiver */ +#define MCF_IRQ_ETX 87 /* Ethernet Transmitter */ +#define MCF_IRQ_ENTC 88 /* Ethernet Non-Time Critical */ +#define MCF_IRQ_QSPI 89 /* Queued Serial Interface */ +#define MCF_IRQ_EINT5 90 /* External Interrupt 5 */ +#define MCF_IRQ_EINT6 91 /* External Interrupt 6 */ +#define MCF_IRQ_SWTO 92 /* Software Watchdog */ +#define MCFINT_VECMAX 95 /* Maxmum interrupt */ +#define MCF_IRQ_TIMER MCF_IRQ_TIMER1 +#define MCF_IRQ_PROFILER MCF_IRQ_TIMER2 +/* + * Generic GPIO support + */ +#define MCFGPIO_PIN_MAX 48 +#define MCFGPIO_IRQ_MAX -1 +#define MCFGPIO_IRQ_VECBASE -1 /****************************************************************************/ #endif /* m5272sim_h */ diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h index 95f4f8e..453356d 100644 --- a/arch/m68k/include/asm/m527xsim.h +++ b/arch/m68k/include/asm/m527xsim.h @@ -54,6 +54,175 @@ #define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */ #endif + +#ifdef CONFIG_M5271 +#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000) +#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001) +#define MCFGPIO_PODR_DATAL (MCF_IPSBAR + 0x100002) +#define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100003) +#define MCFGPIO_PODR_BS (MCF_IPSBAR + 0x100004) +#define MCFGPIO_PODR_CS (MCF_IPSBAR + 0x100005) +#define MCFGPIO_PODR_SDRAM (MCF_IPSBAR + 0x100006) +#define MCFGPIO_PODR_FECI2C (MCF_IPSBAR + 0x100007) +#define MCFGPIO_PODR_UARTH (MCF_IPSBAR + 0x100008) +#define MCFGPIO_PODR_UARTL (MCF_IPSBAR + 0x100009) +#define MCFGPIO_PODR_QSPI (MCF_IPSBAR + 0x10000A) +#define MCFGPIO_PODR_TIMER (MCF_IPSBAR + 0x10000B) + +#define MCFGPIO_PDDR_ADDR (MCF_IPSBAR + 0x100010) +#define MCFGPIO_PDDR_DATAH (MCF_IPSBAR + 0x100011) +#define MCFGPIO_PDDR_DATAL (MCF_IPSBAR + 0x100012) +#define MCFGPIO_PDDR_BUSCTL (MCF_IPSBAR + 0x100013) +#define MCFGPIO_PDDR_BS (MCF_IPSBAR + 0x100014) +#define MCFGPIO_PDDR_CS (MCF_IPSBAR + 0x100015) +#define MCFGPIO_PDDR_SDRAM (MCF_IPSBAR + 0x100016) +#define MCFGPIO_PDDR_FECI2C (MCF_IPSBAR + 0x100017) +#define MCFGPIO_PDDR_UARTH (MCF_IPSBAR + 0x100018) +#define MCFGPIO_PDDR_UARTL (MCF_IPSBAR + 0x100019) +#define MCFGPIO_PDDR_QSPI (MCF_IPSBAR + 0x10001A) +#define MCFGPIO_PDDR_TIMER (MCF_IPSBAR + 0x10001B) + +#define MCFGPIO_PPDSDR_ADDR (MCF_IPSBAR + 0x100020) +#define MCFGPIO_PPDSDR_DATAH (MCF_IPSBAR + 0x100021) +#define MCFGPIO_PPDSDR_DATAL (MCF_IPSBAR + 0x100022) +#define MCFGPIO_PPDSDR_BUSCTL (MCF_IPSBAR + 0x100023) +#define MCFGPIO_PPDSDR_BS (MCF_IPSBAR + 0x100024) +#define MCFGPIO_PPDSDR_CS (MCF_IPSBAR + 0x100025) +#define MCFGPIO_PPDSDR_SDRAM (MCF_IPSBAR + 0x100026) +#define MCFGPIO_PPDSDR_FECI2C (MCF_IPSBAR + 0x100027) +#define MCFGPIO_PPDSDR_UARTH (MCF_IPSBAR + 0x100028) +#define MCFGPIO_PPDSDR_UARTL (MCF_IPSBAR + 0x100029) +#define MCFGPIO_PPDSDR_QSPI (MCF_IPSBAR + 0x10002A) +#define MCFGPIO_PPDSDR_TIMER (MCF_IPSBAR + 0x10002B) + +#define MCFGPIO_PCLRR_ADDR (MCF_IPSBAR + 0x100030) +#define MCFGPIO_PCLRR_DATAH (MCF_IPSBAR + 0x100031) +#define MCFGPIO_PCLRR_DATAL (MCF_IPSBAR + 0x100032) +#define MCFGPIO_PCLRR_BUSCTL (MCF_IPSBAR + 0x100033) +#define MCFGPIO_PCLRR_BS (MCF_IPSBAR + 0x100034) +#define MCFGPIO_PCLRR_CS (MCF_IPSBAR + 0x100035) +#define MCFGPIO_PCLRR_SDRAM (MCF_IPSBAR + 0x100036) +#define MCFGPIO_PCLRR_FECI2C (MCF_IPSBAR + 0x100037) +#define MCFGPIO_PCLRR_UARTH (MCF_IPSBAR + 0x100038) +#define MCFGPIO_PCLRR_UARTL (MCF_IPSBAR + 0x100039) +#define MCFGPIO_PCLRR_QSPI (MCF_IPSBAR + 0x10003A) +#define MCFGPIO_PCLRR_TIMER (MCF_IPSBAR + 0x10003B) + +/* + * Generic GPIO support + */ +#define MCFGPIO_PODR MCFGPIO_PODR_ADDR +#define MCFGPIO_PDDR MCFGPIO_PDDR_ADDR +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_ADDR +#define MCFGPIO_SETR MCFGPIO_PPDSDR_ADDR +#define MCFGPIO_CLRR MCFGPIO_PCLRR_ADDR + +#define MCFGPIO_PIN_MAX 100 +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +#endif + +#ifdef CONFIG_M5275 +#define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100004) +#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100005) +#define MCFGPIO_PODR_CS (MCF_IPSBAR + 0x100008) +#define MCFGPIO_PODR_FEC0H (MCF_IPSBAR + 0x10000A) +#define MCFGPIO_PODR_FEC0L (MCF_IPSBAR + 0x10000B) +#define MCFGPIO_PODR_FECI2C (MCF_IPSBAR + 0x10000C) +#define MCFGPIO_PODR_QSPI (MCF_IPSBAR + 0x10000D) +#define MCFGPIO_PODR_SDRAM (MCF_IPSBAR + 0x10000E) +#define MCFGPIO_PODR_TIMERH (MCF_IPSBAR + 0x10000F) +#define MCFGPIO_PODR_TIMERL (MCF_IPSBAR + 0x100010) +#define MCFGPIO_PODR_UARTL (MCF_IPSBAR + 0x100011) +#define MCFGPIO_PODR_FEC1H (MCF_IPSBAR + 0x100012) +#define MCFGPIO_PODR_FEC1L (MCF_IPSBAR + 0x100013) +#define MCFGPIO_PODR_BS (MCF_IPSBAR + 0x100014) +#define MCFGPIO_PODR_IRQ (MCF_IPSBAR + 0x100015) +#define MCFGPIO_PODR_USBH (MCF_IPSBAR + 0x100016) +#define MCFGPIO_PODR_USBL (MCF_IPSBAR + 0x100017) +#define MCFGPIO_PODR_UARTH (MCF_IPSBAR + 0x100018) + +#define MCFGPIO_PDDR_BUSCTL (MCF_IPSBAR + 0x100020) +#define MCFGPIO_PDDR_ADDR (MCF_IPSBAR + 0x100021) +#define MCFGPIO_PDDR_CS (MCF_IPSBAR + 0x100024) +#define MCFGPIO_PDDR_FEC0H (MCF_IPSBAR + 0x100026) +#define MCFGPIO_PDDR_FEC0L (MCF_IPSBAR + 0x100027) +#define MCFGPIO_PDDR_FECI2C (MCF_IPSBAR + 0x100028) +#define MCFGPIO_PDDR_QSPI (MCF_IPSBAR + 0x100029) +#define MCFGPIO_PDDR_SDRAM (MCF_IPSBAR + 0x10002A) +#define MCFGPIO_PDDR_TIMERH (MCF_IPSBAR + 0x10002B) +#define MCFGPIO_PDDR_TIMERL (MCF_IPSBAR + 0x10002C) +#define MCFGPIO_PDDR_UARTL (MCF_IPSBAR + 0x10002D) +#define MCFGPIO_PDDR_FEC1H (MCF_IPSBAR + 0x10002E) +#define MCFGPIO_PDDR_FEC1L (MCF_IPSBAR + 0x10002F) +#define MCFGPIO_PDDR_BS (MCF_IPSBAR + 0x100030) +#define MCFGPIO_PDDR_IRQ (MCF_IPSBAR + 0x100031) +#define MCFGPIO_PDDR_USBH (MCF_IPSBAR + 0x100032) +#define MCFGPIO_PDDR_USBL (MCF_IPSBAR + 0x100033) +#define MCFGPIO_PDDR_UARTH (MCF_IPSBAR + 0x100034) + +#define MCFGPIO_PPDSDR_BUSCTL (MCF_IPSBAR + 0x10003C) +#define MCFGPIO_PPDSDR_ADDR (MCF_IPSBAR + 0x10003D) +#define MCFGPIO_PPDSDR_CS (MCF_IPSBAR + 0x100040) +#define MCFGPIO_PPDSDR_FEC0H (MCF_IPSBAR + 0x100042) +#define MCFGPIO_PPDSDR_FEC0L (MCF_IPSBAR + 0x100043) +#define MCFGPIO_PPDSDR_FECI2C (MCF_IPSBAR + 0x100044) +#define MCFGPIO_PPDSDR_QSPI (MCF_IPSBAR + 0x100045) +#define MCFGPIO_PPDSDR_SDRAM (MCF_IPSBAR + 0x100046) +#define MCFGPIO_PPDSDR_TIMERH (MCF_IPSBAR + 0x100047) +#define MCFGPIO_PPDSDR_TIMERL (MCF_IPSBAR + 0x100048) +#define MCFGPIO_PPDSDR_UARTL (MCF_IPSBAR + 0x100049) +#define MCFGPIO_PPDSDR_FEC1H (MCF_IPSBAR + 0x10004A) +#define MCFGPIO_PPDSDR_FEC1L (MCF_IPSBAR + 0x10004B) +#define MCFGPIO_PPDSDR_BS (MCF_IPSBAR + 0x10004C) +#define MCFGPIO_PPDSDR_IRQ (MCF_IPSBAR + 0x10004D) +#define MCFGPIO_PPDSDR_USBH (MCF_IPSBAR + 0x10004E) +#define MCFGPIO_PPDSDR_USBL (MCF_IPSBAR + 0x10004F) +#define MCFGPIO_PPDSDR_UARTH (MCF_IPSBAR + 0x100050) + +#define MCFGPIO_PCLRR_BUSCTL (MCF_IPSBAR + 0x100058) +#define MCFGPIO_PCLRR_ADDR (MCF_IPSBAR + 0x100059) +#define MCFGPIO_PCLRR_CS (MCF_IPSBAR + 0x10005C) +#define MCFGPIO_PCLRR_FEC0H (MCF_IPSBAR + 0x10005E) +#define MCFGPIO_PCLRR_FEC0L (MCF_IPSBAR + 0x10005F) +#define MCFGPIO_PCLRR_FECI2C (MCF_IPSBAR + 0x100060) +#define MCFGPIO_PCLRR_QSPI (MCF_IPSBAR + 0x100061) +#define MCFGPIO_PCLRR_SDRAM (MCF_IPSBAR + 0x100062) +#define MCFGPIO_PCLRR_TIMERH (MCF_IPSBAR + 0x100063) +#define MCFGPIO_PCLRR_TIMERL (MCF_IPSBAR + 0x100064) +#define MCFGPIO_PCLRR_UARTL (MCF_IPSBAR + 0x100065) +#define MCFGPIO_PCLRR_FEC1H (MCF_IPSBAR + 0x100066) +#define MCFGPIO_PCLRR_FEC1L (MCF_IPSBAR + 0x100067) +#define MCFGPIO_PCLRR_BS (MCF_IPSBAR + 0x100068) +#define MCFGPIO_PCLRR_IRQ (MCF_IPSBAR + 0x100069) +#define MCFGPIO_PCLRR_USBH (MCF_IPSBAR + 0x10006A) +#define MCFGPIO_PCLRR_USBL (MCF_IPSBAR + 0x10006B) +#define MCFGPIO_PCLRR_UARTH (MCF_IPSBAR + 0x10006C) + + +/* + * Generic GPIO support + */ +#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL +#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL +#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL +#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL + +#define MCFGPIO_PIN_MAX 148 +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +#endif + +/* + * EPort + */ + +#define MCFEPORT_EPDDR (MCF_IPSBAR + 0x130002) +#define MCFEPORT_EPDR (MCF_IPSBAR + 0x130004) +#define MCFEPORT_EPPDR (MCF_IPSBAR + 0x130005) + + /* * GPIO pins setups to enable the UARTs. */ diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h index d79c49f..e2ad1f4 100644 --- a/arch/m68k/include/asm/m528xsim.h +++ b/arch/m68k/include/asm/m528xsim.h @@ -41,6 +41,157 @@ #define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ /* + * GPIO registers + */ +#define MCFGPIO_PORTA (MCF_IPSBAR + 0x00100000) +#define MCFGPIO_PORTB (MCF_IPSBAR + 0x00100001) +#define MCFGPIO_PORTC (MCF_IPSBAR + 0x00100002) +#define MCFGPIO_PORTD (MCF_IPSBAR + 0x00100003) +#define MCFGPIO_PORTE (MCF_IPSBAR + 0x00100004) +#define MCFGPIO_PORTF (MCF_IPSBAR + 0x00100005) +#define MCFGPIO_PORTG (MCF_IPSBAR + 0x00100006) +#define MCFGPIO_PORTH (MCF_IPSBAR + 0x00100007) +#define MCFGPIO_PORTJ (MCF_IPSBAR + 0x00100008) +#define MCFGPIO_PORTDD (MCF_IPSBAR + 0x00100009) +#define MCFGPIO_PORTEH (MCF_IPSBAR + 0x0010000A) +#define MCFGPIO_PORTEL (MCF_IPSBAR + 0x0010000B) +#define MCFGPIO_PORTAS (MCF_IPSBAR + 0x0010000C) +#define MCFGPIO_PORTQS (MCF_IPSBAR + 0x0010000D) +#define MCFGPIO_PORTSD (MCF_IPSBAR + 0x0010000E) +#define MCFGPIO_PORTTC (MCF_IPSBAR + 0x0010000F) +#define MCFGPIO_PORTTD (MCF_IPSBAR + 0x00100010) +#define MCFGPIO_PORTUA (MCF_IPSBAR + 0x00100011) + +#define MCFGPIO_DDRA (MCF_IPSBAR + 0x00100014) +#define MCFGPIO_DDRB (MCF_IPSBAR + 0x00100015) +#define MCFGPIO_DDRC (MCF_IPSBAR + 0x00100016) +#define MCFGPIO_DDRD (MCF_IPSBAR + 0x00100017) +#define MCFGPIO_DDRE (MCF_IPSBAR + 0x00100018) +#define MCFGPIO_DDRF (MCF_IPSBAR + 0x00100019) +#define MCFGPIO_DDRG (MCF_IPSBAR + 0x0010001A) +#define MCFGPIO_DDRH (MCF_IPSBAR + 0x0010001B) +#define MCFGPIO_DDRJ (MCF_IPSBAR + 0x0010001C) +#define MCFGPIO_DDRDD (MCF_IPSBAR + 0x0010001D) +#define MCFGPIO_DDREH (MCF_IPSBAR + 0x0010001E) +#define MCFGPIO_DDREL (MCF_IPSBAR + 0x0010001F) +#define MCFGPIO_DDRAS (MCF_IPSBAR + 0x00100020) +#define MCFGPIO_DDRQS (MCF_IPSBAR + 0x00100021) +#define MCFGPIO_DDRSD (MCF_IPSBAR + 0x00100022) +#define MCFGPIO_DDRTC (MCF_IPSBAR + 0x00100023) +#define MCFGPIO_DDRTD (MCF_IPSBAR + 0x00100024) +#define MCFGPIO_DDRUA (MCF_IPSBAR + 0x00100025) + +#define MCFGPIO_PORTAP (MCF_IPSBAR + 0x00100028) +#define MCFGPIO_PORTBP (MCF_IPSBAR + 0x00100029) +#define MCFGPIO_PORTCP (MCF_IPSBAR + 0x0010002A) +#define MCFGPIO_PORTDP (MCF_IPSBAR + 0x0010002B) +#define MCFGPIO_PORTEP (MCF_IPSBAR + 0x0010002C) +#define MCFGPIO_PORTFP (MCF_IPSBAR + 0x0010002D) +#define MCFGPIO_PORTGP (MCF_IPSBAR + 0x0010002E) +#define MCFGPIO_PORTHP (MCF_IPSBAR + 0x0010002F) +#define MCFGPIO_PORTJP (MCF_IPSBAR + 0x00100030) +#define MCFGPIO_PORTDDP (MCF_IPSBAR + 0x00100031) +#define MCFGPIO_PORTEHP (MCF_IPSBAR + 0x00100032) +#define MCFGPIO_PORTELP (MCF_IPSBAR + 0x00100033) +#define MCFGPIO_PORTASP (MCF_IPSBAR + 0x00100034) +#define MCFGPIO_PORTQSP (MCF_IPSBAR + 0x00100035) +#define MCFGPIO_PORTSDP (MCF_IPSBAR + 0x00100036) +#define MCFGPIO_PORTTCP (MCF_IPSBAR + 0x00100037) +#define MCFGPIO_PORTTDP (MCF_IPSBAR + 0x00100038) +#define MCFGPIO_PORTUAP (MCF_IPSBAR + 0x00100039) + +#define MCFGPIO_SETA (MCF_IPSBAR + 0x00100028) +#define MCFGPIO_SETB (MCF_IPSBAR + 0x00100029) +#define MCFGPIO_SETC (MCF_IPSBAR + 0x0010002A) +#define MCFGPIO_SETD (MCF_IPSBAR + 0x0010002B) +#define MCFGPIO_SETE (MCF_IPSBAR + 0x0010002C) +#define MCFGPIO_SETF (MCF_IPSBAR + 0x0010002D) +#define MCFGPIO_SETG (MCF_IPSBAR + 0x0010002E) +#define MCFGPIO_SETH (MCF_IPSBAR + 0x0010002F) +#define MCFGPIO_SETJ (MCF_IPSBAR + 0x00100030) +#define MCFGPIO_SETDD (MCF_IPSBAR + 0x00100031) +#define MCFGPIO_SETEH (MCF_IPSBAR + 0x00100032) +#define MCFGPIO_SETEL (MCF_IPSBAR + 0x00100033) +#define MCFGPIO_SETAS (MCF_IPSBAR + 0x00100034) +#define MCFGPIO_SETQS (MCF_IPSBAR + 0x00100035) +#define MCFGPIO_SETSD (MCF_IPSBAR + 0x00100036) +#define MCFGPIO_SETTC (MCF_IPSBAR + 0x00100037) +#define MCFGPIO_SETTD (MCF_IPSBAR + 0x00100038) +#define MCFGPIO_SETUA (MCF_IPSBAR + 0x00100039) + +#define MCFGPIO_CLRA (MCF_IPSBAR + 0x0010003C) +#define MCFGPIO_CLRB (MCF_IPSBAR + 0x0010003D) +#define MCFGPIO_CLRC (MCF_IPSBAR + 0x0010003E) +#define MCFGPIO_CLRD (MCF_IPSBAR + 0x0010003F) +#define MCFGPIO_CLRE (MCF_IPSBAR + 0x00100040) +#define MCFGPIO_CLRF (MCF_IPSBAR + 0x00100041) +#define MCFGPIO_CLRG (MCF_IPSBAR + 0x00100042) +#define MCFGPIO_CLRH (MCF_IPSBAR + 0x00100043) +#define MCFGPIO_CLRJ (MCF_IPSBAR + 0x00100044) +#define MCFGPIO_CLRDD (MCF_IPSBAR + 0x00100045) +#define MCFGPIO_CLREH (MCF_IPSBAR + 0x00100046) +#define MCFGPIO_CLREL (MCF_IPSBAR + 0x00100047) +#define MCFGPIO_CLRAS (MCF_IPSBAR + 0x00100048) +#define MCFGPIO_CLRQS (MCF_IPSBAR + 0x00100049) +#define MCFGPIO_CLRSD (MCF_IPSBAR + 0x0010004A) +#define MCFGPIO_CLRTC (MCF_IPSBAR + 0x0010004B) +#define MCFGPIO_CLRTD (MCF_IPSBAR + 0x0010004C) +#define MCFGPIO_CLRUA (MCF_IPSBAR + 0x0010004D) + +#define MCFGPIO_PBCDPAR (MCF_IPSBAR + 0x00100050) +#define MCFGPIO_PFPAR (MCF_IPSBAR + 0x00100051) +#define MCFGPIO_PEPAR (MCF_IPSBAR + 0x00100052) +#define MCFGPIO_PJPAR (MCF_IPSBAR + 0x00100054) +#define MCFGPIO_PSDPAR (MCF_IPSBAR + 0x00100055) +#define MCFGPIO_PASPAR (MCF_IPSBAR + 0x00100056) +#define MCFGPIO_PEHLPAR (MCF_IPSBAR + 0x00100058) +#define MCFGPIO_PQSPAR (MCF_IPSBAR + 0x00100059) +#define MCFGPIO_PTCPAR (MCF_IPSBAR + 0x0010005A) +#define MCFGPIO_PTDPAR (MCF_IPSBAR + 0x0010005B) +#define MCFGPIO_PUAPAR (MCF_IPSBAR + 0x0010005C) + +/* + * Edge Port registers + */ +#define MCFEPORT_EPPAR (MCF_IPSBAR + 0x00130000) +#define MCFEPORT_EPDDR (MCF_IPSBAR + 0x00130002) +#define MCFEPORT_EPIER (MCF_IPSBAR + 0x00130003) +#define MCFEPORT_EPDR (MCF_IPSBAR + 0x00130004) +#define MCFEPORT_EPPDR (MCF_IPSBAR + 0x00130005) +#define MCFEPORT_EPFR (MCF_IPSBAR + 0x00130006) + +/* + * Queued ADC registers + */ +#define MCFQADC_PORTQA (MCF_IPSBAR + 0x00190006) +#define MCFQADC_PORTQB (MCF_IPSBAR + 0x00190007) +#define MCFQADC_DDRQA (MCF_IPSBAR + 0x00190008) +#define MCFQADC_DDRQB (MCF_IPSBAR + 0x00190009) + +/* + * General Purpose Timers registers + */ +#define MCFGPTA_GPTPORT (MCF_IPSBAR + 0x001A001D) +#define MCFGPTA_GPTDDR (MCF_IPSBAR + 0x001A001E) +#define MCFGPTB_GPTPORT (MCF_IPSBAR + 0x001B001D) +#define MCFGPTB_GPTDDR (MCF_IPSBAR + 0x001B001E) +/* + * + * definitions for generic gpio support + * + */ +#define MCFGPIO_PODR MCFGPIO_PORTA /* port output data */ +#define MCFGPIO_PDDR MCFGPIO_DDRA /* port data direction */ +#define MCFGPIO_PPDR MCFGPIO_PORTAP /* port pin data */ +#define MCFGPIO_SETR MCFGPIO_SETA /* set output */ +#define MCFGPIO_CLRR MCFGPIO_CLRA /* clr output */ + +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +#define MCFGPIO_PIN_MAX 180 + + +/* * Derek Cheung - 6 Feb 2005 * add I2C and QSPI register definition using Freescale's MCF5282 */ diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h index 5886728..c6830e5 100644 --- a/arch/m68k/include/asm/m5307sim.h +++ b/arch/m68k/include/asm/m5307sim.h @@ -90,8 +90,15 @@ #define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ #define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ -#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ -#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ +#define MCFSIM_PADDR (MCF_MBAR + 0x244) +#define MCFSIM_PADAT (MCF_MBAR + 0x248) + +/* + * Generic GPIO support + */ +#define MCFGPIO_PIN_MAX 16 +#define MCFGPIO_IRQ_MAX -1 +#define MCFGPIO_IRQ_VECBASE -1 /* Definition offset address for CS2-7 -- old mask 5307 */ @@ -117,22 +124,6 @@ #define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ -#if defined(CONFIG_M5307) -#define MCFSIM_IMR_MASKALL 0x3fffe /* All SIM intr sources */ -#endif - -/* - * Macro to set IMR register. It is 32 bits on the 5307. - */ -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - /* * Some symbol defines for the Parallel Port Pin Assignment Register @@ -149,6 +140,11 @@ #define IRQ3_LEVEL6 0x40 #define IRQ1_LEVEL2 0x20 +/* + * Define system peripheral IRQ usage. + */ +#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ +#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ /* * Define the Cache register flags. diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h index eb7fd44..36bf15a 100644 --- a/arch/m68k/include/asm/m532xsim.h +++ b/arch/m68k/include/asm/m532xsim.h @@ -56,47 +56,21 @@ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ -#define MCFSIM_IMR_MASKALL 0xFFFFFFFF /* All SIM intr sources */ - -#define MCFSIM_IMR_SIMR0 0xFC04801C -#define MCFSIM_IMR_SIMR1 0xFC04C01C -#define MCFSIM_IMR_CIMR0 0xFC04801D -#define MCFSIM_IMR_CIMR1 0xFC04C01D +#define MCFINTC0_SIMR 0xFC04801C +#define MCFINTC0_CIMR 0xFC04801D +#define MCFINTC0_ICR0 0xFC048040 +#define MCFINTC1_SIMR 0xFC04C01C +#define MCFINTC1_CIMR 0xFC04C01D +#define MCFINTC1_ICR0 0xFC04C040 #define MCFSIM_ICR_TIMER1 (0xFC048040+32) #define MCFSIM_ICR_TIMER2 (0xFC048040+33) - /* - * Macro to set IMR register. It is 32 bits on the 5307. + * Define system peripheral IRQ usage. */ -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - -#define mcf_getiprl() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL)) - -#define mcf_getiprh() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH)) - - -#define mcf_enable_irq0(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq); - -#define mcf_enable_irq1(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq); - -#define mcf_disable_irq0(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq); - -#define mcf_disable_irq1(irq) \ - *((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq); +#define MCF_IRQ_TIMER (64 + 32) /* Timer0 */ +#define MCF_IRQ_PROFILER (64 + 33) /* Timer1 */ /* * Define the Cache register flags. @@ -422,70 +396,70 @@ *********************************************************************/ /* Register read/write macros */ -#define MCF_GPIO_PODR_FECH MCF_REG08(0xFC0A4000) -#define MCF_GPIO_PODR_FECL MCF_REG08(0xFC0A4001) -#define MCF_GPIO_PODR_SSI MCF_REG08(0xFC0A4002) -#define MCF_GPIO_PODR_BUSCTL MCF_REG08(0xFC0A4003) -#define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004) -#define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005) -#define MCF_GPIO_PODR_PWM MCF_REG08(0xFC0A4006) -#define MCF_GPIO_PODR_FECI2C MCF_REG08(0xFC0A4007) -#define MCF_GPIO_PODR_UART MCF_REG08(0xFC0A4009) -#define MCF_GPIO_PODR_QSPI MCF_REG08(0xFC0A400A) -#define MCF_GPIO_PODR_TIMER MCF_REG08(0xFC0A400B) -#define MCF_GPIO_PODR_LCDDATAH MCF_REG08(0xFC0A400D) -#define MCF_GPIO_PODR_LCDDATAM MCF_REG08(0xFC0A400E) -#define MCF_GPIO_PODR_LCDDATAL MCF_REG08(0xFC0A400F) -#define MCF_GPIO_PODR_LCDCTLH MCF_REG08(0xFC0A4010) -#define MCF_GPIO_PODR_LCDCTLL MCF_REG08(0xFC0A4011) -#define MCF_GPIO_PDDR_FECH MCF_REG08(0xFC0A4014) -#define MCF_GPIO_PDDR_FECL MCF_REG08(0xFC0A4015) -#define MCF_GPIO_PDDR_SSI MCF_REG08(0xFC0A4016) -#define MCF_GPIO_PDDR_BUSCTL MCF_REG08(0xFC0A4017) -#define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A4018) -#define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A4019) -#define MCF_GPIO_PDDR_PWM MCF_REG08(0xFC0A401A) -#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0xFC0A401B) -#define MCF_GPIO_PDDR_UART MCF_REG08(0xFC0A401C) -#define MCF_GPIO_PDDR_QSPI MCF_REG08(0xFC0A401E) -#define MCF_GPIO_PDDR_TIMER MCF_REG08(0xFC0A401F) -#define MCF_GPIO_PDDR_LCDDATAH MCF_REG08(0xFC0A4021) -#define MCF_GPIO_PDDR_LCDDATAM MCF_REG08(0xFC0A4022) -#define MCF_GPIO_PDDR_LCDDATAL MCF_REG08(0xFC0A4023) -#define MCF_GPIO_PDDR_LCDCTLH MCF_REG08(0xFC0A4024) -#define MCF_GPIO_PDDR_LCDCTLL MCF_REG08(0xFC0A4025) -#define MCF_GPIO_PPDSDR_FECH MCF_REG08(0xFC0A4028) -#define MCF_GPIO_PPDSDR_FECL MCF_REG08(0xFC0A4029) -#define MCF_GPIO_PPDSDR_SSI MCF_REG08(0xFC0A402A) -#define MCF_GPIO_PPDSDR_BUSCTL MCF_REG08(0xFC0A402B) -#define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A402C) -#define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A402D) -#define MCF_GPIO_PPDSDR_PWM MCF_REG08(0xFC0A402E) -#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0xFC0A402F) -#define MCF_GPIO_PPDSDR_UART MCF_REG08(0xFC0A4031) -#define MCF_GPIO_PPDSDR_QSPI MCF_REG08(0xFC0A4032) -#define MCF_GPIO_PPDSDR_TIMER MCF_REG08(0xFC0A4033) -#define MCF_GPIO_PPDSDR_LCDDATAH MCF_REG08(0xFC0A4035) -#define MCF_GPIO_PPDSDR_LCDDATAM MCF_REG08(0xFC0A4036) -#define MCF_GPIO_PPDSDR_LCDDATAL MCF_REG08(0xFC0A4037) -#define MCF_GPIO_PPDSDR_LCDCTLH MCF_REG08(0xFC0A4038) -#define MCF_GPIO_PPDSDR_LCDCTLL MCF_REG08(0xFC0A4039) -#define MCF_GPIO_PCLRR_FECH MCF_REG08(0xFC0A403C) -#define MCF_GPIO_PCLRR_FECL MCF_REG08(0xFC0A403D) -#define MCF_GPIO_PCLRR_SSI MCF_REG08(0xFC0A403E) -#define MCF_GPIO_PCLRR_BUSCTL MCF_REG08(0xFC0A403F) -#define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A4040) -#define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A4041) -#define MCF_GPIO_PCLRR_PWM MCF_REG08(0xFC0A4042) -#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0xFC0A4043) -#define MCF_GPIO_PCLRR_UART MCF_REG08(0xFC0A4045) -#define MCF_GPIO_PCLRR_QSPI MCF_REG08(0xFC0A4046) -#define MCF_GPIO_PCLRR_TIMER MCF_REG08(0xFC0A4047) -#define MCF_GPIO_PCLRR_LCDDATAH MCF_REG08(0xFC0A4049) -#define MCF_GPIO_PCLRR_LCDDATAM MCF_REG08(0xFC0A404A) -#define MCF_GPIO_PCLRR_LCDDATAL MCF_REG08(0xFC0A404B) -#define MCF_GPIO_PCLRR_LCDCTLH MCF_REG08(0xFC0A404C) -#define MCF_GPIO_PCLRR_LCDCTLL MCF_REG08(0xFC0A404D) +#define MCFGPIO_PODR_FECH (0xFC0A4000) +#define MCFGPIO_PODR_FECL (0xFC0A4001) +#define MCFGPIO_PODR_SSI (0xFC0A4002) +#define MCFGPIO_PODR_BUSCTL (0xFC0A4003) +#define MCFGPIO_PODR_BE (0xFC0A4004) +#define MCFGPIO_PODR_CS (0xFC0A4005) +#define MCFGPIO_PODR_PWM (0xFC0A4006) +#define MCFGPIO_PODR_FECI2C (0xFC0A4007) +#define MCFGPIO_PODR_UART (0xFC0A4009) +#define MCFGPIO_PODR_QSPI (0xFC0A400A) +#define MCFGPIO_PODR_TIMER (0xFC0A400B) +#define MCFGPIO_PODR_LCDDATAH (0xFC0A400D) +#define MCFGPIO_PODR_LCDDATAM (0xFC0A400E) +#define MCFGPIO_PODR_LCDDATAL (0xFC0A400F) +#define MCFGPIO_PODR_LCDCTLH (0xFC0A4010) +#define MCFGPIO_PODR_LCDCTLL (0xFC0A4011) +#define MCFGPIO_PDDR_FECH (0xFC0A4014) +#define MCFGPIO_PDDR_FECL (0xFC0A4015) +#define MCFGPIO_PDDR_SSI (0xFC0A4016) +#define MCFGPIO_PDDR_BUSCTL (0xFC0A4017) +#define MCFGPIO_PDDR_BE (0xFC0A4018) +#define MCFGPIO_PDDR_CS (0xFC0A4019) +#define MCFGPIO_PDDR_PWM (0xFC0A401A) +#define MCFGPIO_PDDR_FECI2C (0xFC0A401B) +#define MCFGPIO_PDDR_UART (0xFC0A401C) +#define MCFGPIO_PDDR_QSPI (0xFC0A401E) +#define MCFGPIO_PDDR_TIMER (0xFC0A401F) +#define MCFGPIO_PDDR_LCDDATAH (0xFC0A4021) +#define MCFGPIO_PDDR_LCDDATAM (0xFC0A4022) +#define MCFGPIO_PDDR_LCDDATAL (0xFC0A4023) +#define MCFGPIO_PDDR_LCDCTLH (0xFC0A4024) +#define MCFGPIO_PDDR_LCDCTLL (0xFC0A4025) +#define MCFGPIO_PPDSDR_FECH (0xFC0A4028) +#define MCFGPIO_PPDSDR_FECL (0xFC0A4029) +#define MCFGPIO_PPDSDR_SSI (0xFC0A402A) +#define MCFGPIO_PPDSDR_BUSCTL (0xFC0A402B) +#define MCFGPIO_PPDSDR_BE (0xFC0A402C) +#define MCFGPIO_PPDSDR_CS (0xFC0A402D) +#define MCFGPIO_PPDSDR_PWM (0xFC0A402E) +#define MCFGPIO_PPDSDR_FECI2C (0xFC0A402F) +#define MCFGPIO_PPDSDR_UART (0xFC0A4031) +#define MCFGPIO_PPDSDR_QSPI (0xFC0A4032) +#define MCFGPIO_PPDSDR_TIMER (0xFC0A4033) +#define MCFGPIO_PPDSDR_LCDDATAH (0xFC0A4035) +#define MCFGPIO_PPDSDR_LCDDATAM (0xFC0A4036) +#define MCFGPIO_PPDSDR_LCDDATAL (0xFC0A4037) +#define MCFGPIO_PPDSDR_LCDCTLH (0xFC0A4038) +#define MCFGPIO_PPDSDR_LCDCTLL (0xFC0A4039) +#define MCFGPIO_PCLRR_FECH (0xFC0A403C) +#define MCFGPIO_PCLRR_FECL (0xFC0A403D) +#define MCFGPIO_PCLRR_SSI (0xFC0A403E) +#define MCFGPIO_PCLRR_BUSCTL (0xFC0A403F) +#define MCFGPIO_PCLRR_BE (0xFC0A4040) +#define MCFGPIO_PCLRR_CS (0xFC0A4041) +#define MCFGPIO_PCLRR_PWM (0xFC0A4042) +#define MCFGPIO_PCLRR_FECI2C (0xFC0A4043) +#define MCFGPIO_PCLRR_UART (0xFC0A4045) +#define MCFGPIO_PCLRR_QSPI (0xFC0A4046) +#define MCFGPIO_PCLRR_TIMER (0xFC0A4047) +#define MCFGPIO_PCLRR_LCDDATAH (0xFC0A4049) +#define MCFGPIO_PCLRR_LCDDATAM (0xFC0A404A) +#define MCFGPIO_PCLRR_LCDDATAL (0xFC0A404B) +#define MCFGPIO_PCLRR_LCDCTLH (0xFC0A404C) +#define MCFGPIO_PCLRR_LCDCTLL (0xFC0A404D) #define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4050) #define MCF_GPIO_PAR_PWM MCF_REG08(0xFC0A4051) #define MCF_GPIO_PAR_BUSCTL MCF_REG08(0xFC0A4052) @@ -1187,6 +1161,20 @@ /* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */ #define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x) (((x)&0x03)<<0) +/* + * Generic GPIO support + */ +#define MCFGPIO_PODR MCFGPIO_PODR_FECH +#define MCFGPIO_PDDR MCFGPIO_PDDR_FECH +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_FECH +#define MCFGPIO_SETR MCFGPIO_PPDSDR_FECH +#define MCFGPIO_CLRR MCFGPIO_PCLRR_FECH + +#define MCFGPIO_PIN_MAX 136 +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE + + /********************************************************************* * * Interrupt Controller (INTC) @@ -2154,12 +2142,12 @@ *********************************************************************/ /* Register read/write macros */ -#define MCF_EPORT_EPPAR MCF_REG16(0xFC094000) -#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002) -#define MCF_EPORT_EPIER MCF_REG08(0xFC094003) -#define MCF_EPORT_EPDR MCF_REG08(0xFC094004) -#define MCF_EPORT_EPPDR MCF_REG08(0xFC094005) -#define MCF_EPORT_EPFR MCF_REG08(0xFC094006) +#define MCFEPORT_EPPAR (0xFC094000) +#define MCFEPORT_EPDDR (0xFC094002) +#define MCFEPORT_EPIER (0xFC094003) +#define MCFEPORT_EPDR (0xFC094004) +#define MCFEPORT_EPPDR (0xFC094005) +#define MCFEPORT_EPFR (0xFC094006) /* Bit definitions and macros for MCF_EPORT_EPPAR */ #define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2) diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h index cc22c4a..c399abb 100644 --- a/arch/m68k/include/asm/m5407sim.h +++ b/arch/m68k/include/asm/m5407sim.h @@ -73,9 +73,15 @@ #define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ #define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ -#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ -#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ +#define MCFSIM_PADDR (MCF_MBAR + 0x244) +#define MCFSIM_PADAT (MCF_MBAR + 0x248) +/* + * Generic GPIO support + */ +#define MCFGPIO_PIN_MAX 16 +#define MCFGPIO_IRQ_MAX -1 +#define MCFGPIO_IRQ_VECBASE -1 /* * Some symbol defines for the above... @@ -91,19 +97,6 @@ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ /* - * Macro to set IMR register. It is 32 bits on the 5407. - */ -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#define mcf_getipr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) - - -/* * Some symbol defines for the Parallel Port Pin Assignment Register */ #define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */ @@ -118,6 +111,11 @@ #define IRQ3_LEVEL6 0x40 #define IRQ1_LEVEL2 0x20 +/* + * Define system peripheral IRQ usage. + */ +#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ +#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ /* * Define the Cache register flags. diff --git a/arch/m68k/include/asm/mcfgpio.h b/arch/m68k/include/asm/mcfgpio.h new file mode 100644 index 0000000..ee5e4cc --- /dev/null +++ b/arch/m68k/include/asm/mcfgpio.h @@ -0,0 +1,40 @@ +/* + * Coldfire generic GPIO support. + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef mcfgpio_h +#define mcfgpio_h + +#include <linux/io.h> +#include <asm-generic/gpio.h> + +struct mcf_gpio_chip { + struct gpio_chip gpio_chip; + void __iomem *pddr; + void __iomem *podr; + void __iomem *ppdr; + void __iomem *setr; + void __iomem *clrr; + const u8 *gpio_to_pinmux; +}; + +int mcf_gpio_direction_input(struct gpio_chip *, unsigned); +int mcf_gpio_get_value(struct gpio_chip *, unsigned); +int mcf_gpio_direction_output(struct gpio_chip *, unsigned, int); +void mcf_gpio_set_value(struct gpio_chip *, unsigned, int); +void mcf_gpio_set_value_fast(struct gpio_chip *, unsigned, int); +int mcf_gpio_request(struct gpio_chip *, unsigned); +void mcf_gpio_free(struct gpio_chip *, unsigned); + +#endif diff --git a/arch/m68k/include/asm/mcfintc.h b/arch/m68k/include/asm/mcfintc.h new file mode 100644 index 0000000..4183320 --- /dev/null +++ b/arch/m68k/include/asm/mcfintc.h @@ -0,0 +1,89 @@ +/****************************************************************************/ + +/* + * mcfintc.h -- support definitions for the simple ColdFire + * Interrupt Controller + * + * (C) Copyright 2009, Greg Ungerer <gerg@uclinux.org> + */ + +/****************************************************************************/ +#ifndef mcfintc_h +#define mcfintc_h +/****************************************************************************/ + +/* + * Most of the older ColdFire parts use the same simple interrupt + * controller. This is currently used on the 5206, 5206e, 5249, 5307 + * and 5407 parts. + * + * The builtin peripherals are masked through dedicated bits in the + * Interrupt Mask register (IMR) - and this is not indexed (or in any way + * related to) the actual interrupt number they use. So knowing the IRQ + * number doesn't explicitly map to a certain internal device for + * interrupt control purposes. + */ + +/* + * Bit definitions for the ICR family of registers. + */ +#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ +#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ +#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ +#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ +#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ +#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ +#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ +#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ +#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ + +#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ +#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ +#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ +#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ + +/* + * IMR bit position definitions. Not all ColdFire parts with this interrupt + * controller actually support all of these interrupt sources. But the bit + * numbers are the same in all cores. + */ +#define MCFINTC_EINT1 1 /* External int #1 */ +#define MCFINTC_EINT2 2 /* External int #2 */ +#define MCFINTC_EINT3 3 /* External int #3 */ +#define MCFINTC_EINT4 4 /* External int #4 */ +#define MCFINTC_EINT5 5 /* External int #5 */ +#define MCFINTC_EINT6 6 /* External int #6 */ +#define MCFINTC_EINT7 7 /* External int #7 */ +#define MCFINTC_SWT 8 /* Software Watchdog */ +#define MCFINTC_TIMER1 9 +#define MCFINTC_TIMER2 10 +#define MCFINTC_I2C 11 /* I2C / MBUS */ +#define MCFINTC_UART0 12 +#define MCFINTC_UART1 13 +#define MCFINTC_DMA0 14 +#define MCFINTC_DMA1 15 +#define MCFINTC_DMA2 16 +#define MCFINTC_DMA3 17 +#define MCFINTC_QSPI 18 + +#ifndef __ASSEMBLER__ + +/* + * There is no one-is-one correspondance between the interrupt number (irq) + * and the bit fields on the mask register. So we create a per-cpu type + * mapping of irq to mask bit. The CPU platform code needs to register + * its supported irq's at init time, using this function. + */ +extern unsigned char mcf_irq2imr[]; +static inline void mcf_mapirq2imr(int irq, int imr) +{ + mcf_irq2imr[irq] = imr; +} + +void mcf_autovector(int irq); +void mcf_setimr(int index); +void mcf_clrimr(int index); +#endif + +/****************************************************************************/ +#endif /* mcfintc_h */ diff --git a/arch/m68k/include/asm/mcfne.h b/arch/m68k/include/asm/mcfne.h index 431f63a..bf638be 100644 --- a/arch/m68k/include/asm/mcfne.h +++ b/arch/m68k/include/asm/mcfne.h @@ -239,87 +239,4 @@ void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len) #endif /* NE2000_OFFOFFSET */ /****************************************************************************/ - -#ifdef COLDFIRE_NE2000_FUNCS - -/* - * Lastly the interrupt set up code... - * Minor differences between the different board types. - */ - -#if defined(CONFIG_ARN5206) -void ne2000_irqsetup(int irq) -{ - volatile unsigned char *icrp; - - icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4); - *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2; - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4); -} -#endif - -#if defined(CONFIG_M5206eC3) -void ne2000_irqsetup(int irq) -{ - volatile unsigned char *icrp; - - icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4); - *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC; - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4); -} -#endif - -#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel) -void ne2000_irqsetup(int irq) -{ - mcf_autovector(irq); -} -#endif - -#if defined(CONFIG_M5272) && defined(CONFIG_NETtel) -void ne2000_irqsetup(int irq) -{ - volatile unsigned long *icrp; - volatile unsigned long *pitr; - - /* The NE2000 device uses external IRQ3 */ - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = (*icrp & 0x77077777) | 0x00d00000; - - pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR); - *pitr = *pitr | 0x20000000; -} - -void ne2000_irqack(int irq) -{ - volatile unsigned long *icrp; - - /* The NE2000 device uses external IRQ3 */ - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = (*icrp & 0x77777777) | 0x00800000; -} -#endif - -#if defined(CONFIG_M5307) || defined(CONFIG_M5407) -#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) - -void ne2000_irqsetup(int irq) -{ - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3); - mcf_autovector(irq); -} - -#else - -void ne2000_irqsetup(int irq) -{ - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3); -} - -#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */ -#endif /* CONFIG_M5307 || CONFIG_M5407 */ - -#endif /* COLDFIRE_NE2000_FUNCS */ - -/****************************************************************************/ #endif /* mcfne_h */ diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h index da3f2ce..9c70a67 100644 --- a/arch/m68k/include/asm/mcfsim.h +++ b/arch/m68k/include/asm/mcfsim.h @@ -4,7 +4,7 @@ * mcfsim.h -- ColdFire System Integration Module support. * * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) */ /****************************************************************************/ @@ -12,19 +12,21 @@ #define mcfsim_h /****************************************************************************/ - /* - * Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282, - * 5307 or 5407 specific addresses. + * Include the appropriate ColdFire CPU specific System Integration Module + * (SIM) definitions. */ #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) #include <asm/m5206sim.h> +#include <asm/mcfintc.h> #elif defined(CONFIG_M520x) #include <asm/m520xsim.h> #elif defined(CONFIG_M523x) #include <asm/m523xsim.h> +#include <asm/mcfintc.h> #elif defined(CONFIG_M5249) #include <asm/m5249sim.h> +#include <asm/mcfintc.h> #elif defined(CONFIG_M527x) #include <asm/m527xsim.h> #elif defined(CONFIG_M5272) @@ -33,94 +35,13 @@ #include <asm/m528xsim.h> #elif defined(CONFIG_M5307) #include <asm/m5307sim.h> +#include <asm/mcfintc.h> #elif defined(CONFIG_M532x) #include <asm/m532xsim.h> #elif defined(CONFIG_M5407) #include <asm/m5407sim.h> +#include <asm/mcfintc.h> #endif - -/* - * Define the base address of the SIM within the MBAR address space. - */ -#define MCFSIM_BASE 0x0 /* Base address of SIM */ - - -/* - * Bit definitions for the ICR family of registers. - */ -#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ -#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ -#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ -#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ -#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ -#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ -#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ -#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ -#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ - -#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ -#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ -#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ -#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ - -/* - * Bit definitions for the Interrupt Mask register (IMR). - */ -#define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */ -#define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */ -#define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */ -#define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */ -#define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */ -#define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */ -#define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */ - -#define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */ -#define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */ -#define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */ -#define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */ -#define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */ -#define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */ - -#if defined(CONFIG_M5206e) -#define MCFSIM_IMR_DMA1 0x4000 /* DMA 1 intr */ -#define MCFSIM_IMR_DMA2 0x8000 /* DMA 2 intr */ -#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) -#define MCFSIM_IMR_DMA0 0x4000 /* DMA 0 intr */ -#define MCFSIM_IMR_DMA1 0x8000 /* DMA 1 intr */ -#define MCFSIM_IMR_DMA2 0x10000 /* DMA 2 intr */ -#define MCFSIM_IMR_DMA3 0x20000 /* DMA 3 intr */ -#endif - -/* - * Mask for all of the SIM devices. Some parts have more or less - * SIM devices. This is a catchall for the sandard set. - */ -#ifndef MCFSIM_IMR_MASKALL -#define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */ -#endif - - -/* - * PIT interrupt settings, if not found in mXXXXsim.h file. - */ -#ifndef ICR_INTRCONF -#define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */ -#endif -#ifndef MCFPIT_IMR -#define MCFPIT_IMR MCFINTC_IMRH -#endif -#ifndef MCFPIT_IMR_IBIT -#define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32)) -#endif - - -#ifndef __ASSEMBLY__ -/* - * Definition for the interrupt auto-vectoring support. - */ -extern void mcf_autovector(unsigned int vec); -#endif /* __ASSEMBLY__ */ - /****************************************************************************/ #endif /* mcfsim_h */ diff --git a/arch/m68k/include/asm/mcfsmc.h b/arch/m68k/include/asm/mcfsmc.h index 2d7a4db..527bea5 100644 --- a/arch/m68k/include/asm/mcfsmc.h +++ b/arch/m68k/include/asm/mcfsmc.h @@ -167,15 +167,15 @@ void smc_remap(unsigned int ioaddr) static int once = 0; extern unsigned short ppdata; if (once++ == 0) { - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec; + *((volatile unsigned short *)MCFSIM_PADDR) = 0x00ec; ppdata |= 0x0080; - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; + *((volatile unsigned short *)MCFSIM_PADAT) = ppdata; outw(0x0001, ioaddr + BANK_SELECT); outw(0x0001, ioaddr + BANK_SELECT); outw(0x0067, ioaddr + BASE); ppdata &= ~0x0080; - *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; + *((volatile unsigned short *)MCFSIM_PADAT) = ppdata; } *((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180; diff --git a/arch/m68k/include/asm/nettel.h b/arch/m68k/include/asm/nettel.h index 0299f6a..4dec2d9 100644 --- a/arch/m68k/include/asm/nettel.h +++ b/arch/m68k/include/asm/nettel.h @@ -48,14 +48,14 @@ extern volatile unsigned short ppdata; static __inline__ unsigned int mcf_getppdata(void) { volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); + pp = (volatile unsigned short *) MCFSIM_PADAT; return((unsigned int) *pp); } static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) { volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); + pp = (volatile unsigned short *) MCFSIM_PADAT; ppdata = (ppdata & ~mask) | bits; *pp = ppdata; } diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h index 9aa3f90..1f31b06 100644 --- a/arch/m68k/include/asm/page_no.h +++ b/arch/m68k/include/asm/page_no.h @@ -1,10 +1,12 @@ #ifndef _M68KNOMMU_PAGE_H #define _M68KNOMMU_PAGE_H +#include <linux/const.h> + /* PAGE_SHIFT determines the page size */ #define PAGE_SHIFT (12) -#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) #include <asm/setup.h> diff --git a/arch/m68k/include/asm/pinmux.h b/arch/m68k/include/asm/pinmux.h new file mode 100644 index 0000000..119ee68 --- /dev/null +++ b/arch/m68k/include/asm/pinmux.h @@ -0,0 +1,30 @@ +/* + * Coldfire generic GPIO pinmux support. + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef pinmux_h +#define pinmux_h + +#define MCFPINMUX_NONE -1 + +extern int mcf_pinmux_request(unsigned, unsigned); +extern void mcf_pinmux_release(unsigned, unsigned); + +static inline int mcf_pinmux_is_valid(unsigned pinmux) +{ + return pinmux != MCFPINMUX_NONE; +} + +#endif + diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h index fc3f2c2..74fd674 100644 --- a/arch/m68k/include/asm/processor.h +++ b/arch/m68k/include/asm/processor.h @@ -1,5 +1,170 @@ -#ifdef __uClinux__ -#include "processor_no.h" +/* + * include/asm-m68k/processor.h + * + * Copyright (C) 1995 Hamish Macdonald + */ + +#ifndef __ASM_M68K_PROCESSOR_H +#define __ASM_M68K_PROCESSOR_H + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +#include <linux/thread_info.h> +#include <asm/segment.h> +#include <asm/fpu.h> +#include <asm/ptrace.h> + +static inline unsigned long rdusp(void) +{ +#ifdef CONFIG_COLDFIRE + extern unsigned int sw_usp; + return sw_usp; #else -#include "processor_mm.h" + unsigned long usp; + __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); + return usp; +#endif +} + +static inline void wrusp(unsigned long usp) +{ +#ifdef CONFIG_COLDFIRE + extern unsigned int sw_usp; + sw_usp = usp; +#else + __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); +#endif +} + +/* + * User space process size: 3.75GB. This is hardcoded into a few places, + * so don't change it unless you know what you are doing. + */ +#ifndef CONFIG_SUN3 +#define TASK_SIZE (0xF0000000UL) +#else +#define TASK_SIZE (0x0E000000UL) +#endif + +#ifdef __KERNEL__ +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP +#endif + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#ifdef CONFIG_MMU +#ifndef CONFIG_SUN3 +#define TASK_UNMAPPED_BASE 0xC0000000UL +#else +#define TASK_UNMAPPED_BASE 0x0A000000UL +#endif +#define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr) +#else +#define TASK_UNMAPPED_BASE 0 +#endif + +struct thread_struct { + unsigned long ksp; /* kernel stack pointer */ + unsigned long usp; /* user stack pointer */ + unsigned short sr; /* saved status register */ + unsigned short fs; /* saved fs (sfc, dfc) */ + unsigned long crp[2]; /* cpu root pointer */ + unsigned long esp0; /* points to SR of stack frame */ + unsigned long faddr; /* info about last fault */ + int signo, code; + unsigned long fp[8*3]; + unsigned long fpcntl[3]; /* fp control regs */ + unsigned char fpstate[FPSTATESIZE]; /* floating point state */ + struct thread_info info; +}; + +#define INIT_THREAD { \ + .ksp = sizeof(init_stack) + (unsigned long) init_stack, \ + .sr = PS_S, \ + .fs = __KERNEL_DS, \ + .info = INIT_THREAD_INFO(init_task), \ +} + +#ifdef CONFIG_MMU +/* + * Do necessary setup to start up a newly executed thread. + */ +static inline void start_thread(struct pt_regs * regs, unsigned long pc, + unsigned long usp) +{ + /* reads from user space */ + set_fs(USER_DS); + + regs->pc = pc; + regs->sr &= ~0x2000; + wrusp(usp); +} + +#else + +/* + * Coldfire stacks need to be re-aligned on trap exit, conventional + * 68k can handle this case cleanly. + */ +#ifdef CONFIG_COLDFIRE +#define reformat(_regs) do { (_regs)->format = 0x4; } while(0) +#else +#define reformat(_regs) do { } while (0) +#endif + +#define start_thread(_regs, _pc, _usp) \ +do { \ + set_fs(USER_DS); /* reads from user space */ \ + (_regs)->pc = (_pc); \ + ((struct switch_stack *)(_regs))[-1].a6 = 0; \ + reformat(_regs); \ + if (current->mm) \ + (_regs)->d5 = current->mm->start_data; \ + (_regs)->sr &= ~0x2000; \ + wrusp(_usp); \ +} while(0) + +#endif + +/* Forward declaration, a strange C thing */ +struct task_struct; + +/* Free all resources held by a thread. */ +static inline void release_thread(struct task_struct *dead_task) +{ +} + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +/* + * Free current thread data structures etc.. + */ +static inline void exit_thread(void) +{ +} + +extern unsigned long thread_saved_pc(struct task_struct *tsk); + +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) \ + ({ \ + unsigned long eip = 0; \ + if ((tsk)->thread.esp0 > PAGE_SIZE && \ + (virt_addr_valid((tsk)->thread.esp0))) \ + eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ + eip; }) +#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) + +#define cpu_relax() barrier() + #endif diff --git a/arch/m68k/include/asm/processor_mm.h b/arch/m68k/include/asm/processor_mm.h deleted file mode 100644 index 1f61ef5..0000000 --- a/arch/m68k/include/asm/processor_mm.h +++ /dev/null @@ -1,130 +0,0 @@ -/* - * include/asm-m68k/processor.h - * - * Copyright (C) 1995 Hamish Macdonald - */ - -#ifndef __ASM_M68K_PROCESSOR_H -#define __ASM_M68K_PROCESSOR_H - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -#include <linux/thread_info.h> -#include <asm/segment.h> -#include <asm/fpu.h> -#include <asm/ptrace.h> - -static inline unsigned long rdusp(void) -{ - unsigned long usp; - - __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); - return usp; -} - -static inline void wrusp(unsigned long usp) -{ - __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); -} - -/* - * User space process size: 3.75GB. This is hardcoded into a few places, - * so don't change it unless you know what you are doing. - */ -#ifndef CONFIG_SUN3 -#define TASK_SIZE (0xF0000000UL) -#else -#define TASK_SIZE (0x0E000000UL) -#endif - -#ifdef __KERNEL__ -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX STACK_TOP -#endif - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#ifndef CONFIG_SUN3 -#define TASK_UNMAPPED_BASE 0xC0000000UL -#else -#define TASK_UNMAPPED_BASE 0x0A000000UL -#endif -#define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr) - -struct thread_struct { - unsigned long ksp; /* kernel stack pointer */ - unsigned long usp; /* user stack pointer */ - unsigned short sr; /* saved status register */ - unsigned short fs; /* saved fs (sfc, dfc) */ - unsigned long crp[2]; /* cpu root pointer */ - unsigned long esp0; /* points to SR of stack frame */ - unsigned long faddr; /* info about last fault */ - int signo, code; - unsigned long fp[8*3]; - unsigned long fpcntl[3]; /* fp control regs */ - unsigned char fpstate[FPSTATESIZE]; /* floating point state */ - struct thread_info info; -}; - -#define INIT_THREAD { \ - .ksp = sizeof(init_stack) + (unsigned long) init_stack, \ - .sr = PS_S, \ - .fs = __KERNEL_DS, \ - .info = INIT_THREAD_INFO(init_task), \ -} - -/* - * Do necessary setup to start up a newly executed thread. - */ -static inline void start_thread(struct pt_regs * regs, unsigned long pc, - unsigned long usp) -{ - /* reads from user space */ - set_fs(USER_DS); - - regs->pc = pc; - regs->sr &= ~0x2000; - wrusp(usp); -} - -/* Forward declaration, a strange C thing */ -struct task_struct; - -/* Free all resources held by a thread. */ -static inline void release_thread(struct task_struct *dead_task) -{ -} - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -/* - * Free current thread data structures etc.. - */ -static inline void exit_thread(void) -{ -} - -extern unsigned long thread_saved_pc(struct task_struct *tsk); - -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) \ - ({ \ - unsigned long eip = 0; \ - if ((tsk)->thread.esp0 > PAGE_SIZE && \ - (virt_addr_valid((tsk)->thread.esp0))) \ - eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ - eip; }) -#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) - -#define cpu_relax() barrier() - -#endif diff --git a/arch/m68k/include/asm/processor_no.h b/arch/m68k/include/asm/processor_no.h deleted file mode 100644 index 7a1e0ba..0000000 --- a/arch/m68k/include/asm/processor_no.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * include/asm-m68knommu/processor.h - * - * Copyright (C) 1995 Hamish Macdonald - */ - -#ifndef __ASM_M68K_PROCESSOR_H -#define __ASM_M68K_PROCESSOR_H - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -#include <linux/compiler.h> -#include <linux/threads.h> -#include <asm/types.h> -#include <asm/segment.h> -#include <asm/fpu.h> -#include <asm/ptrace.h> -#include <asm/current.h> - -static inline unsigned long rdusp(void) -{ -#ifdef CONFIG_COLDFIRE - extern unsigned int sw_usp; - return(sw_usp); -#else - unsigned long usp; - __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); - return usp; -#endif -} - -static inline void wrusp(unsigned long usp) -{ -#ifdef CONFIG_COLDFIRE - extern unsigned int sw_usp; - sw_usp = usp; -#else - __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); -#endif -} - -/* - * User space process size: 3.75GB. This is hardcoded into a few places, - * so don't change it unless you know what you are doing. - */ -#define TASK_SIZE (0xF0000000UL) - -/* - * This decides where the kernel will search for a free chunk of vm - * space during mmap's. We won't be using it - */ -#define TASK_UNMAPPED_BASE 0 - -/* - * if you change this structure, you must change the code and offsets - * in m68k/machasm.S - */ - -struct thread_struct { - unsigned long ksp; /* kernel stack pointer */ - unsigned long usp; /* user stack pointer */ - unsigned short sr; /* saved status register */ - unsigned short fs; /* saved fs (sfc, dfc) */ - unsigned long crp[2]; /* cpu root pointer */ - unsigned long esp0; /* points to SR of stack frame */ - unsigned long fp[8*3]; - unsigned long fpcntl[3]; /* fp control regs */ - unsigned char fpstate[FPSTATESIZE]; /* floating point state */ -}; - -#define INIT_THREAD { \ - .ksp = sizeof(init_stack) + (unsigned long) init_stack, \ - .sr = PS_S, \ - .fs = __KERNEL_DS, \ -} - -/* - * Coldfire stacks need to be re-aligned on trap exit, conventional - * 68k can handle this case cleanly. - */ -#if defined(CONFIG_COLDFIRE) -#define reformat(_regs) do { (_regs)->format = 0x4; } while(0) -#else -#define reformat(_regs) do { } while (0) -#endif - -/* - * Do necessary setup to start up a newly executed thread. - * - * pass the data segment into user programs if it exists, - * it can't hurt anything as far as I can tell - */ -#define start_thread(_regs, _pc, _usp) \ -do { \ - set_fs(USER_DS); /* reads from user space */ \ - (_regs)->pc = (_pc); \ - ((struct switch_stack *)(_regs))[-1].a6 = 0; \ - reformat(_regs); \ - if (current->mm) \ - (_regs)->d5 = current->mm->start_data; \ - (_regs)->sr &= ~0x2000; \ - wrusp(_usp); \ -} while(0) - -/* Forward declaration, a strange C thing */ -struct task_struct; - -/* Free all resources held by a thread. */ -static inline void release_thread(struct task_struct *dead_task) -{ -} - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -/* - * Free current thread data structures etc.. - */ -static inline void exit_thread(void) -{ -} - -unsigned long thread_saved_pc(struct task_struct *tsk); -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) \ - ({ \ - unsigned long eip = 0; \ - if ((tsk)->thread.esp0 > PAGE_SIZE && \ - (virt_addr_valid((tsk)->thread.esp0))) \ - eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ - eip; }) -#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) - -#define cpu_relax() barrier() - -#endif diff --git a/arch/m68k/include/asm/timex.h b/arch/m68k/include/asm/timex.h index b87f2f2..6759dad 100644 --- a/arch/m68k/include/asm/timex.h +++ b/arch/m68k/include/asm/timex.h @@ -3,10 +3,23 @@ * * m68k architecture timex specifications */ -#ifndef _ASMm68k_TIMEX_H -#define _ASMm68k_TIMEX_H +#ifndef _ASMm68K_TIMEX_H +#define _ASMm68K_TIMEX_H +#ifdef CONFIG_COLDFIRE +/* + * CLOCK_TICK_RATE should give the underlying frequency of the tick timer + * to make ntp work best. For Coldfires, that's the main clock. + */ +#include <asm/coldfire.h> +#define CLOCK_TICK_RATE MCF_CLK +#else +/* + * This default CLOCK_TICK_RATE is probably wrong for many 68k boards + * Users of those boards will need to check and modify accordingly + */ #define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ +#endif typedef unsigned long cycles_t; diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 5343762..e2201b9 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -47,6 +47,10 @@ config GENERIC_FIND_NEXT_BIT bool default y +config GENERIC_GPIO + bool + default n + config GENERIC_HWEIGHT bool default y @@ -182,6 +186,8 @@ config M527x config COLDFIRE bool depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407) + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB default y config CLOCK_SET diff --git a/arch/m68knommu/kernel/irq.c b/arch/m68knommu/kernel/irq.c index 56e0f4c5..c9cac36 100644 --- a/arch/m68knommu/kernel/irq.c +++ b/arch/m68knommu/kernel/irq.c @@ -29,32 +29,6 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs) set_irq_regs(oldregs); } -void ack_bad_irq(unsigned int irq) -{ - printk(KERN_ERR "IRQ: unexpected irq=%d\n", irq); -} - -static struct irq_chip m_irq_chip = { - .name = "M68K-INTC", - .enable = enable_vector, - .disable = disable_vector, - .ack = ack_vector, -}; - -void __init init_IRQ(void) -{ - int irq; - - init_vectors(); - - for (irq = 0; (irq < NR_IRQS); irq++) { - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = NULL; - irq_desc[irq].depth = 1; - irq_desc[irq].chip = &m_irq_chip; - } -} - int show_interrupts(struct seq_file *p, void *v) { struct irqaction *ap; diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c index d182b2f..c2aa717 100644 --- a/arch/m68knommu/kernel/time.c +++ b/arch/m68knommu/kernel/time.c @@ -69,7 +69,7 @@ static unsigned long read_rtc_mmss(void) if ((year += 1900) < 1970) year += 100; - return mktime(year, mon, day, hour, min, sec);; + return mktime(year, mon, day, hour, min, sec); } unsigned long read_persistent_clock(void) diff --git a/arch/m68knommu/lib/checksum.c b/arch/m68knommu/lib/checksum.c index 269d83b..eccf25d 100644 --- a/arch/m68knommu/lib/checksum.c +++ b/arch/m68knommu/lib/checksum.c @@ -92,6 +92,7 @@ out: return result; } +#ifdef CONFIG_COLDFIRE /* * This is a version of ip_compute_csum() optimized for IP headers, * which always checksum on 4 octet boundaries. @@ -100,6 +101,7 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl) { return (__force __sum16)~do_csum(iph,ihl*4); } +#endif /* * computes the checksum of a memory block at buff, length len, @@ -127,15 +129,6 @@ __wsum csum_partial(const void *buff, int len, __wsum sum) EXPORT_SYMBOL(csum_partial); /* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -__sum16 ip_compute_csum(const void *buff, int len) -{ - return (__force __sum16)~do_csum(buff,len); -} - -/* * copy from fs while checksumming, otherwise like csum_partial */ diff --git a/arch/m68knommu/platform/5206/Makefile b/arch/m68knommu/platform/5206/Makefile index a439d9a..113c333 100644 --- a/arch/m68knommu/platform/5206/Makefile +++ b/arch/m68knommu/platform/5206/Makefile @@ -14,5 +14,5 @@ asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 -obj-y := config.o +obj-y := config.o gpio.o diff --git a/arch/m68knommu/platform/5206/config.c b/arch/m68knommu/platform/5206/config.c index f6f7987..9c33546 100644 --- a/arch/m68knommu/platform/5206/config.c +++ b/arch/m68knommu/platform/5206/config.c @@ -49,11 +49,11 @@ static void __init m5206_uart_init_line(int line, int irq) if (line == 0) { writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); writeb(irq, MCFUART_BASE1 + MCFUART_UIVR); - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1); + mcf_mapirq2imr(irq, MCFINTC_UART0); } else if (line == 1) { writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); writeb(irq, MCFUART_BASE2 + MCFUART_UIVR); - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2); + mcf_mapirq2imr(irq, MCFINTC_UART1); } } @@ -68,38 +68,19 @@ static void __init m5206_uarts_init(void) /***************************************************************************/ -void mcf_autovector(unsigned int vec) +static void __init m5206_timers_init(void) { - volatile unsigned char *mbar; - unsigned char icr; - - if ((vec >= 25) && (vec <= 31)) { - vec -= 25; - mbar = (volatile unsigned char *) MCF_MBAR; - icr = MCFSIM_ICR_AUTOVEC | (vec << 3); - *(mbar + MCFSIM_ICR1 + vec) = icr; - vec = 0x1 << (vec + 1); - mcf_setimr(mcf_getimr() & ~vec); - } -} - -/***************************************************************************/ - -void mcf_settimericr(unsigned int timer, unsigned int level) -{ - volatile unsigned char *icrp; - unsigned int icr, imr; - - if (timer <= 2) { - switch (timer) { - case 2: icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break; - default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break; - } - - icrp = (volatile unsigned char *) (MCF_MBAR + icr); - *icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3; - mcf_setimr(mcf_getimr() & ~imr); - } + /* Timer1 is always used as system timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER1ICR); + mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1); + +#ifdef CONFIG_HIGHPROFILE + /* Timer2 is to be used as a high speed profile timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER2ICR); + mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2); +#endif } /***************************************************************************/ @@ -117,15 +98,20 @@ void m5206_cpu_reset(void) void __init config_BSP(char *commandp, int size) { - mcf_setimr(MCFSIM_IMR_MASKALL); mach_reset = m5206_cpu_reset; + m5206_timers_init(); + m5206_uarts_init(); + + /* Only support the external interrupts on their primary level */ + mcf_mapirq2imr(25, MCFINTC_EINT1); + mcf_mapirq2imr(28, MCFINTC_EINT4); + mcf_mapirq2imr(31, MCFINTC_EINT7); } /***************************************************************************/ static int __init init_BSP(void) { - m5206_uarts_init(); platform_add_devices(m5206_devices, ARRAY_SIZE(m5206_devices)); return 0; } diff --git a/arch/m68knommu/platform/5206/gpio.c b/arch/m68knommu/platform/5206/gpio.c new file mode 100644 index 0000000..60f779c --- /dev/null +++ b/arch/m68knommu/platform/5206/gpio.c @@ -0,0 +1,49 @@ +/* + * Coldfire generic GPIO support + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfgpio.h> + +static struct mcf_gpio_chip mcf_gpio_chips[] = { + { + .gpio_chip = { + .label = "PP", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value, + .ngpio = 8, + }, + .pddr = MCFSIM_PADDR, + .podr = MCFSIM_PADAT, + .ppdr = MCFSIM_PADAT, + }, +}; + +static int __init mcf_gpio_init(void) +{ + unsigned i = 0; + while (i < ARRAY_SIZE(mcf_gpio_chips)) + (void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]); + return 0; +} + +core_initcall(mcf_gpio_init); diff --git a/arch/m68knommu/platform/5206e/Makefile b/arch/m68knommu/platform/5206e/Makefile index a439d9a..113c333 100644 --- a/arch/m68knommu/platform/5206e/Makefile +++ b/arch/m68knommu/platform/5206e/Makefile @@ -14,5 +14,5 @@ asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 -obj-y := config.o +obj-y := config.o gpio.o diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c index 65887799..0f41ba8 100644 --- a/arch/m68knommu/platform/5206e/config.c +++ b/arch/m68knommu/platform/5206e/config.c @@ -15,6 +15,7 @@ #include <asm/machdep.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> +#include <asm/mcfuart.h> #include <asm/mcfdma.h> #include <asm/mcfuart.h> @@ -49,11 +50,11 @@ static void __init m5206e_uart_init_line(int line, int irq) if (line == 0) { writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); writeb(irq, MCFUART_BASE1 + MCFUART_UIVR); - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1); + mcf_mapirq2imr(irq, MCFINTC_UART0); } else if (line == 1) { writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); writeb(irq, MCFUART_BASE2 + MCFUART_UIVR); - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2); + mcf_mapirq2imr(irq, MCFINTC_UART1); } } @@ -68,38 +69,19 @@ static void __init m5206e_uarts_init(void) /***************************************************************************/ -void mcf_autovector(unsigned int vec) -{ - volatile unsigned char *mbar; - unsigned char icr; - - if ((vec >= 25) && (vec <= 31)) { - vec -= 25; - mbar = (volatile unsigned char *) MCF_MBAR; - icr = MCFSIM_ICR_AUTOVEC | (vec << 3); - *(mbar + MCFSIM_ICR1 + vec) = icr; - vec = 0x1 << (vec + 1); - mcf_setimr(mcf_getimr() & ~vec); - } -} - -/***************************************************************************/ - -void mcf_settimericr(unsigned int timer, unsigned int level) +static void __init m5206e_timers_init(void) { - volatile unsigned char *icrp; - unsigned int icr, imr; - - if (timer <= 2) { - switch (timer) { - case 2: icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break; - default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break; - } - - icrp = (volatile unsigned char *) (MCF_MBAR + icr); - *icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3; - mcf_setimr(mcf_getimr() & ~imr); - } + /* Timer1 is always used as system timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER1ICR); + mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1); + +#ifdef CONFIG_HIGHPROFILE + /* Timer2 is to be used as a high speed profile timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER2ICR); + mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2); +#endif } /***************************************************************************/ @@ -117,8 +99,6 @@ void m5206e_cpu_reset(void) void __init config_BSP(char *commandp, int size) { - mcf_setimr(MCFSIM_IMR_MASKALL); - #if defined(CONFIG_NETtel) /* Copy command line from FLASH to local buffer... */ memcpy(commandp, (char *) 0xf0004000, size); @@ -126,13 +106,19 @@ void __init config_BSP(char *commandp, int size) #endif /* CONFIG_NETtel */ mach_reset = m5206e_cpu_reset; + m5206e_timers_init(); + m5206e_uarts_init(); + + /* Only support the external interrupts on their primary level */ + mcf_mapirq2imr(25, MCFINTC_EINT1); + mcf_mapirq2imr(28, MCFINTC_EINT4); + mcf_mapirq2imr(31, MCFINTC_EINT7); } /***************************************************************************/ static int __init init_BSP(void) { - m5206e_uarts_init(); platform_add_devices(m5206e_devices, ARRAY_SIZE(m5206e_devices)); return 0; } diff --git a/arch/m68knommu/platform/5206e/gpio.c b/arch/m68knommu/platform/5206e/gpio.c new file mode 100644 index 0000000..60f779c --- /dev/null +++ b/arch/m68knommu/platform/5206e/gpio.c @@ -0,0 +1,49 @@ +/* + * Coldfire generic GPIO support + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfgpio.h> + +static struct mcf_gpio_chip mcf_gpio_chips[] = { + { + .gpio_chip = { + .label = "PP", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value, + .ngpio = 8, + }, + .pddr = MCFSIM_PADDR, + .podr = MCFSIM_PADAT, + .ppdr = MCFSIM_PADAT, + }, +}; + +static int __init mcf_gpio_init(void) +{ + unsigned i = 0; + while (i < ARRAY_SIZE(mcf_gpio_chips)) + (void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]); + return 0; +} + +core_initcall(mcf_gpio_init); diff --git a/arch/m68knommu/platform/520x/Makefile b/arch/m68knommu/platform/520x/Makefile index a50e76a..435ab34 100644 --- a/arch/m68knommu/platform/520x/Makefile +++ b/arch/m68knommu/platform/520x/Makefile @@ -14,4 +14,4 @@ asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 -obj-y := config.o +obj-y := config.o gpio.o diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c index 1c43a8a..92614de 100644 --- a/arch/m68knommu/platform/520x/config.c +++ b/arch/m68knommu/platform/520x/config.c @@ -81,20 +81,11 @@ static struct platform_device *m520x_devices[] __initdata = { /***************************************************************************/ -#define INTC0 (MCF_MBAR + MCFICM_INTC0) - static void __init m520x_uart_init_line(int line, int irq) { - u32 imr; u16 par; u8 par2; - writeb(0x03, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line); - - imr = readl(INTC0 + MCFINTC_IMRL); - imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1); - writel(imr, INTC0 + MCFINTC_IMRL); - switch (line) { case 0: par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART); @@ -131,18 +122,8 @@ static void __init m520x_uarts_init(void) static void __init m520x_fec_init(void) { - u32 imr; u8 v; - /* Unmask FEC interrupts at ColdFire interrupt controller */ - writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 36); - writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 40); - writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 42); - - imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH); - imr &= ~0x0001FFF0; - writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH); - /* Set multi-function pins to ethernet mode */ v = readb(MCF_IPSBAR + MCF_GPIO_PAR_FEC); writeb(v | 0xf0, MCF_IPSBAR + MCF_GPIO_PAR_FEC); @@ -153,17 +134,6 @@ static void __init m520x_fec_init(void) /***************************************************************************/ -/* - * Program the vector to be an auto-vectored. - */ - -void mcf_autovector(unsigned int vec) -{ - /* Everything is auto-vectored on the 520x devices */ -} - -/***************************************************************************/ - static void m520x_cpu_reset(void) { local_irq_disable(); diff --git a/arch/m68knommu/platform/520x/gpio.c b/arch/m68knommu/platform/520x/gpio.c new file mode 100644 index 0000000..15b5bb6 --- /dev/null +++ b/arch/m68knommu/platform/520x/gpio.c @@ -0,0 +1,211 @@ +/* + * Coldfire generic GPIO support + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfgpio.h> + +static struct mcf_gpio_chip mcf_gpio_chips[] = { + { + .gpio_chip = { + .label = "PIRQ", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value, + .ngpio = 8, + }, + .pddr = MCFEPORT_EPDDR, + .podr = MCFEPORT_EPDR, + .ppdr = MCFEPORT_EPPDR, + }, + { + .gpio_chip = { + .label = "BUSCTL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 8, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_BUSCTL, + .podr = MCFGPIO_PODR_BUSCTL, + .ppdr = MCFGPIO_PPDSDR_BUSCTL, + .setr = MCFGPIO_PPDSDR_BUSCTL, + .clrr = MCFGPIO_PCLRR_BUSCTL, + }, + { + .gpio_chip = { + .label = "BE", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 16, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_BE, + .podr = MCFGPIO_PODR_BE, + .ppdr = MCFGPIO_PPDSDR_BE, + .setr = MCFGPIO_PPDSDR_BE, + .clrr = MCFGPIO_PCLRR_BE, + }, + { + .gpio_chip = { + .label = "CS", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 25, + .ngpio = 3, + }, + .pddr = MCFGPIO_PDDR_CS, + .podr = MCFGPIO_PODR_CS, + .ppdr = MCFGPIO_PPDSDR_CS, + .setr = MCFGPIO_PPDSDR_CS, + .clrr = MCFGPIO_PCLRR_CS, + }, + { + .gpio_chip = { + .label = "FECI2C", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 32, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_FECI2C, + .podr = MCFGPIO_PODR_FECI2C, + .ppdr = MCFGPIO_PPDSDR_FECI2C, + .setr = MCFGPIO_PPDSDR_FECI2C, + .clrr = MCFGPIO_PCLRR_FECI2C, + }, + { + .gpio_chip = { + .label = "QSPI", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 40, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_QSPI, + .podr = MCFGPIO_PODR_QSPI, + .ppdr = MCFGPIO_PPDSDR_QSPI, + .setr = MCFGPIO_PPDSDR_QSPI, + .clrr = MCFGPIO_PCLRR_QSPI, + }, + { + .gpio_chip = { + .label = "TIMER", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 48, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_TIMER, + .podr = MCFGPIO_PODR_TIMER, + .ppdr = MCFGPIO_PPDSDR_TIMER, + .setr = MCFGPIO_PPDSDR_TIMER, + .clrr = MCFGPIO_PCLRR_TIMER, + }, + { + .gpio_chip = { + .label = "UART", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 56, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_UART, + .podr = MCFGPIO_PODR_UART, + .ppdr = MCFGPIO_PPDSDR_UART, + .setr = MCFGPIO_PPDSDR_UART, + .clrr = MCFGPIO_PCLRR_UART, + }, + { + .gpio_chip = { + .label = "FECH", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 64, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_FECH, + .podr = MCFGPIO_PODR_FECH, + .ppdr = MCFGPIO_PPDSDR_FECH, + .setr = MCFGPIO_PPDSDR_FECH, + .clrr = MCFGPIO_PCLRR_FECH, + }, + { + .gpio_chip = { + .label = "FECL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 72, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_FECL, + .podr = MCFGPIO_PODR_FECL, + .ppdr = MCFGPIO_PPDSDR_FECL, + .setr = MCFGPIO_PPDSDR_FECL, + .clrr = MCFGPIO_PCLRR_FECL, + }, +}; + +static int __init mcf_gpio_init(void) +{ + unsigned i = 0; + while (i < ARRAY_SIZE(mcf_gpio_chips)) + (void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]); + return 0; +} + +core_initcall(mcf_gpio_init); diff --git a/arch/m68knommu/platform/523x/Makefile b/arch/m68knommu/platform/523x/Makefile index 5694d593..b8f9b45 100644 --- a/arch/m68knommu/platform/523x/Makefile +++ b/arch/m68knommu/platform/523x/Makefile @@ -14,4 +14,4 @@ asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 -obj-y := config.o +obj-y := config.o gpio.o diff --git a/arch/m68knommu/platform/523x/config.c b/arch/m68knommu/platform/523x/config.c index 961fefe..6ba84f2 100644 --- a/arch/m68knommu/platform/523x/config.c +++ b/arch/m68knommu/platform/523x/config.c @@ -82,66 +82,20 @@ static struct platform_device *m523x_devices[] __initdata = { /***************************************************************************/ -#define INTC0 (MCF_MBAR + MCFICM_INTC0) - -static void __init m523x_uart_init_line(int line, int irq) -{ - u32 imr; - - if ((line < 0) || (line > 2)) - return; - - writeb(0x30+line, (INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line)); - - imr = readl(INTC0 + MCFINTC_IMRL); - imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1); - writel(imr, INTC0 + MCFINTC_IMRL); -} - -static void __init m523x_uarts_init(void) -{ - const int nrlines = ARRAY_SIZE(m523x_uart_platform); - int line; - - for (line = 0; (line < nrlines); line++) - m523x_uart_init_line(line, m523x_uart_platform[line].irq); -} - -/***************************************************************************/ - static void __init m523x_fec_init(void) { - u32 imr; - - /* Unmask FEC interrupts at ColdFire interrupt controller */ - writeb(0x28, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 23); - writeb(0x27, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 27); - writeb(0x26, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 29); - - imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH); - imr &= ~0xf; - writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH); - imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL); - imr &= ~0xff800001; - writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL); -} - -/***************************************************************************/ - -void mcf_disableall(void) -{ - *((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff; - *((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff; + u16 par; + u8 v; + + /* Set multi-function pins to ethernet use */ + par = readw(MCF_IPSBAR + 0x100082); + writew(par | 0xf00, MCF_IPSBAR + 0x100082); + v = readb(MCF_IPSBAR + 0x100078); + writeb(v | 0xc0, MCF_IPSBAR + 0x100078); } /***************************************************************************/ -void mcf_autovector(unsigned int vec) -{ - /* Everything is auto-vectored on the 523x */ -} -/***************************************************************************/ - static void m523x_cpu_reset(void) { local_irq_disable(); @@ -152,16 +106,14 @@ static void m523x_cpu_reset(void) void __init config_BSP(char *commandp, int size) { - mcf_disableall(); mach_reset = m523x_cpu_reset; - m523x_uarts_init(); - m523x_fec_init(); } /***************************************************************************/ static int __init init_BSP(void) { + m523x_fec_init(); platform_add_devices(m523x_devices, ARRAY_SIZE(m523x_devices)); return 0; } diff --git a/arch/m68knommu/platform/523x/gpio.c b/arch/m68knommu/platform/523x/gpio.c new file mode 100644 index 0000000..f02840d --- /dev/null +++ b/arch/m68knommu/platform/523x/gpio.c @@ -0,0 +1,283 @@ +/* + * Coldfire generic GPIO support + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfgpio.h> + +static struct mcf_gpio_chip mcf_gpio_chips[] = { + { + .gpio_chip = { + .label = "PIRQ", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value, + .ngpio = 8, + }, + .pddr = MCFEPORT_EPDDR, + .podr = MCFEPORT_EPDR, + .ppdr = MCFEPORT_EPPDR, + }, + { + .gpio_chip = { + .label = "ADDR", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 13, + .ngpio = 3, + }, + .pddr = MCFGPIO_PDDR_ADDR, + .podr = MCFGPIO_PODR_ADDR, + .ppdr = MCFGPIO_PPDSDR_ADDR, + .setr = MCFGPIO_PPDSDR_ADDR, + .clrr = MCFGPIO_PCLRR_ADDR, + }, + { + .gpio_chip = { + .label = "DATAH", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 16, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_DATAH, + .podr = MCFGPIO_PODR_DATAH, + .ppdr = MCFGPIO_PPDSDR_DATAH, + .setr = MCFGPIO_PPDSDR_DATAH, + .clrr = MCFGPIO_PCLRR_DATAH, + }, + { + .gpio_chip = { + .label = "DATAL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 24, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_DATAL, + .podr = MCFGPIO_PODR_DATAL, + .ppdr = MCFGPIO_PPDSDR_DATAL, + .setr = MCFGPIO_PPDSDR_DATAL, + .clrr = MCFGPIO_PCLRR_DATAL, + }, + { + .gpio_chip = { + .label = "BUSCTL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 32, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_BUSCTL, + .podr = MCFGPIO_PODR_BUSCTL, + .ppdr = MCFGPIO_PPDSDR_BUSCTL, + .setr = MCFGPIO_PPDSDR_BUSCTL, + .clrr = MCFGPIO_PCLRR_BUSCTL, + }, + { + .gpio_chip = { + .label = "BS", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 40, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_BS, + .podr = MCFGPIO_PODR_BS, + .ppdr = MCFGPIO_PPDSDR_BS, + .setr = MCFGPIO_PPDSDR_BS, + .clrr = MCFGPIO_PCLRR_BS, + }, + { + .gpio_chip = { + .label = "CS", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 49, + .ngpio = 7, + }, + .pddr = MCFGPIO_PDDR_CS, + .podr = MCFGPIO_PODR_CS, + .ppdr = MCFGPIO_PPDSDR_CS, + .setr = MCFGPIO_PPDSDR_CS, + .clrr = MCFGPIO_PCLRR_CS, + }, + { + .gpio_chip = { + .label = "SDRAM", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 56, + .ngpio = 6, + }, + .pddr = MCFGPIO_PDDR_SDRAM, + .podr = MCFGPIO_PODR_SDRAM, + .ppdr = MCFGPIO_PPDSDR_SDRAM, + .setr = MCFGPIO_PPDSDR_SDRAM, + .clrr = MCFGPIO_PCLRR_SDRAM, + }, + { + .gpio_chip = { + .label = "FECI2C", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 64, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_FECI2C, + .podr = MCFGPIO_PODR_FECI2C, + .ppdr = MCFGPIO_PPDSDR_FECI2C, + .setr = MCFGPIO_PPDSDR_FECI2C, + .clrr = MCFGPIO_PCLRR_FECI2C, + }, + { + .gpio_chip = { + .label = "UARTH", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 72, + .ngpio = 2, + }, + .pddr = MCFGPIO_PDDR_UARTH, + .podr = MCFGPIO_PODR_UARTH, + .ppdr = MCFGPIO_PPDSDR_UARTH, + .setr = MCFGPIO_PPDSDR_UARTH, + .clrr = MCFGPIO_PCLRR_UARTH, + }, + { + .gpio_chip = { + .label = "UARTL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 80, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_UARTL, + .podr = MCFGPIO_PODR_UARTL, + .ppdr = MCFGPIO_PPDSDR_UARTL, + .setr = MCFGPIO_PPDSDR_UARTL, + .clrr = MCFGPIO_PCLRR_UARTL, + }, + { + .gpio_chip = { + .label = "QSPI", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 88, + .ngpio = 5, + }, + .pddr = MCFGPIO_PDDR_QSPI, + .podr = MCFGPIO_PODR_QSPI, + .ppdr = MCFGPIO_PPDSDR_QSPI, + .setr = MCFGPIO_PPDSDR_QSPI, + .clrr = MCFGPIO_PCLRR_QSPI, + }, + { + .gpio_chip = { + .label = "TIMER", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 96, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_TIMER, + .podr = MCFGPIO_PODR_TIMER, + .ppdr = MCFGPIO_PPDSDR_TIMER, + .setr = MCFGPIO_PPDSDR_TIMER, + .clrr = MCFGPIO_PCLRR_TIMER, + }, + { + .gpio_chip = { + .label = "ETPU", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 104, + .ngpio = 3, + }, + .pddr = MCFGPIO_PDDR_ETPU, + .podr = MCFGPIO_PODR_ETPU, + .ppdr = MCFGPIO_PPDSDR_ETPU, + .setr = MCFGPIO_PPDSDR_ETPU, + .clrr = MCFGPIO_PCLRR_ETPU, + }, +}; + +static int __init mcf_gpio_init(void) +{ + unsigned i = 0; + while (i < ARRAY_SIZE(mcf_gpio_chips)) + (void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]); + return 0; +} + +core_initcall(mcf_gpio_init); diff --git a/arch/m68knommu/platform/5249/Makefile b/arch/m68knommu/platform/5249/Makefile index a439d9a..f56225d 100644 --- a/arch/m68knommu/platform/5249/Makefile +++ b/arch/m68knommu/platform/5249/Makefile @@ -14,5 +14,5 @@ asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 -obj-y := config.o +obj-y := config.o gpio.o intc2.o diff --git a/arch/m68knommu/platform/5249/config.c b/arch/m68knommu/platform/5249/config.c index 93d9988..646f5ba 100644 --- a/arch/m68knommu/platform/5249/config.c +++ b/arch/m68knommu/platform/5249/config.c @@ -48,11 +48,11 @@ static void __init m5249_uart_init_line(int line, int irq) if (line == 0) { writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR); - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1); + mcf_mapirq2imr(irq, MCFINTC_UART0); } else if (line == 1) { writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR); - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2); + mcf_mapirq2imr(irq, MCFINTC_UART1); } } @@ -65,38 +65,21 @@ static void __init m5249_uarts_init(void) m5249_uart_init_line(line, m5249_uart_platform[line].irq); } - /***************************************************************************/ -void mcf_autovector(unsigned int vec) +static void __init m5249_timers_init(void) { - volatile unsigned char *mbar; - - if ((vec >= 25) && (vec <= 31)) { - mbar = (volatile unsigned char *) MCF_MBAR; - vec = 0x1 << (vec - 24); - *(mbar + MCFSIM_AVR) |= vec; - mcf_setimr(mcf_getimr() & ~vec); - } -} - -/***************************************************************************/ - -void mcf_settimericr(unsigned int timer, unsigned int level) -{ - volatile unsigned char *icrp; - unsigned int icr, imr; - - if (timer <= 2) { - switch (timer) { - case 2: icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break; - default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break; - } - - icrp = (volatile unsigned char *) (MCF_MBAR + icr); - *icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3; - mcf_setimr(mcf_getimr() & ~imr); - } + /* Timer1 is always used as system timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER1ICR); + mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1); + +#ifdef CONFIG_HIGHPROFILE + /* Timer2 is to be used as a high speed profile timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER2ICR); + mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2); +#endif } /***************************************************************************/ @@ -114,15 +97,15 @@ void m5249_cpu_reset(void) void __init config_BSP(char *commandp, int size) { - mcf_setimr(MCFSIM_IMR_MASKALL); mach_reset = m5249_cpu_reset; + m5249_timers_init(); + m5249_uarts_init(); } /***************************************************************************/ static int __init init_BSP(void) { - m5249_uarts_init(); platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices)); return 0; } diff --git a/arch/m68knommu/platform/5249/gpio.c b/arch/m68knommu/platform/5249/gpio.c new file mode 100644 index 0000000..c611eab --- /dev/null +++ b/arch/m68knommu/platform/5249/gpio.c @@ -0,0 +1,65 @@ +/* + * Coldfire generic GPIO support + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfgpio.h> + +static struct mcf_gpio_chip mcf_gpio_chips[] = { + { + .gpio_chip = { + .label = "GPIO0", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value, + .ngpio = 32, + }, + .pddr = MCFSIM2_GPIOENABLE, + .podr = MCFSIM2_GPIOWRITE, + .ppdr = MCFSIM2_GPIOREAD, + }, + { + .gpio_chip = { + .label = "GPIO1", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value, + .base = 32, + .ngpio = 32, + }, + .pddr = MCFSIM2_GPIO1ENABLE, + .podr = MCFSIM2_GPIO1WRITE, + .ppdr = MCFSIM2_GPIO1READ, + }, +}; + +static int __init mcf_gpio_init(void) +{ + unsigned i = 0; + while (i < ARRAY_SIZE(mcf_gpio_chips)) + (void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]); + return 0; +} + +core_initcall(mcf_gpio_init); diff --git a/arch/m68knommu/platform/5249/intc2.c b/arch/m68knommu/platform/5249/intc2.c new file mode 100644 index 0000000..d09d9da --- /dev/null +++ b/arch/m68knommu/platform/5249/intc2.c @@ -0,0 +1,59 @@ +/* + * intc2.c -- support for the 2nd INTC controller of the 5249 + * + * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> + +static void intc2_irq_gpio_mask(unsigned int irq) +{ + u32 imr; + imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE); + imr &= ~(0x1 << (irq - MCFINTC2_GPIOIRQ0)); + writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE); +} + +static void intc2_irq_gpio_unmask(unsigned int irq) +{ + u32 imr; + imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE); + imr |= (0x1 << (irq - MCFINTC2_GPIOIRQ0)); + writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE); +} + +static void intc2_irq_gpio_ack(unsigned int irq) +{ + writel(0x1 << (irq - MCFINTC2_GPIOIRQ0), MCF_MBAR2 + MCFSIM2_GPIOINTCLEAR); +} + +static struct irq_chip intc2_irq_gpio_chip = { + .name = "CF-INTC2", + .mask = intc2_irq_gpio_mask, + .unmask = intc2_irq_gpio_unmask, + .ack = intc2_irq_gpio_ack, +}; + +static int __init mcf_intc2_init(void) +{ + int irq; + + /* GPIO interrupt sources */ + for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++) + irq_desc[irq].chip = &intc2_irq_gpio_chip; + + return 0; +} + +arch_initcall(mcf_intc2_init); diff --git a/arch/m68knommu/platform/5272/Makefile b/arch/m68knommu/platform/5272/Makefile index 26135d9..93673ef 100644 --- a/arch/m68knommu/platform/5272/Makefile +++ b/arch/m68knommu/platform/5272/Makefile @@ -14,5 +14,5 @@ asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 -obj-y := config.o +obj-y := config.o gpio.o intc.o diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c index 5f95fcd..59278c0 100644 --- a/arch/m68knommu/platform/5272/config.c +++ b/arch/m68knommu/platform/5272/config.c @@ -20,12 +20,6 @@ /***************************************************************************/ -extern unsigned int mcf_timervector; -extern unsigned int mcf_profilevector; -extern unsigned int mcf_timerlevel; - -/***************************************************************************/ - /* * Some platforms need software versions of the GPIO data registers. */ @@ -37,11 +31,11 @@ unsigned char ledbank = 0xff; static struct mcf_platform_uart m5272_uart_platform[] = { { .mapbase = MCF_MBAR + MCFUART_BASE1, - .irq = 73, + .irq = MCF_IRQ_UART1, }, { .mapbase = MCF_MBAR + MCFUART_BASE2, - .irq = 74, + .irq = MCF_IRQ_UART2, }, { }, }; @@ -59,18 +53,18 @@ static struct resource m5272_fec_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = 86, - .end = 86, + .start = MCF_IRQ_ERX, + .end = MCF_IRQ_ERX, .flags = IORESOURCE_IRQ, }, { - .start = 87, - .end = 87, + .start = MCF_IRQ_ETX, + .end = MCF_IRQ_ETX, .flags = IORESOURCE_IRQ, }, { - .start = 88, - .end = 88, + .start = MCF_IRQ_ENTC, + .end = MCF_IRQ_ENTC, .flags = IORESOURCE_IRQ, }, }; @@ -94,9 +88,6 @@ static void __init m5272_uart_init_line(int line, int irq) u32 v; if ((line >= 0) && (line < 2)) { - v = (line) ? 0x0e000000 : 0xe0000000; - writel(v, MCF_MBAR + MCFSIM_ICR2); - /* Enable the output lines for the serial ports */ v = readl(MCF_MBAR + MCFSIM_PBCNT); v = (v & ~0x000000ff) | 0x00000055; @@ -119,54 +110,6 @@ static void __init m5272_uarts_init(void) /***************************************************************************/ -static void __init m5272_fec_init(void) -{ - u32 imr; - - /* Unmask FEC interrupts at ColdFire interrupt controller */ - imr = readl(MCF_MBAR + MCFSIM_ICR3); - imr = (imr & ~0x00000fff) | 0x00000ddd; - writel(imr, MCF_MBAR + MCFSIM_ICR3); - - imr = readl(MCF_MBAR + MCFSIM_ICR1); - imr = (imr & ~0x0f000000) | 0x0d000000; - writel(imr, MCF_MBAR + MCFSIM_ICR1); -} - -/***************************************************************************/ - -void mcf_disableall(void) -{ - volatile unsigned long *icrp; - - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - icrp[0] = 0x88888888; - icrp[1] = 0x88888888; - icrp[2] = 0x88888888; - icrp[3] = 0x88888888; -} - -/***************************************************************************/ - -void mcf_autovector(unsigned int vec) -{ - /* Everything is auto-vectored on the 5272 */ -} - -/***************************************************************************/ - -void mcf_settimericr(int timer, int level) -{ - volatile unsigned long *icrp; - - if ((timer >= 1 ) && (timer <= 4)) { - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = (0x8 | level) << ((4 - timer) * 4); - } -} - -/***************************************************************************/ - static void m5272_cpu_reset(void) { local_irq_disable(); @@ -190,8 +133,6 @@ void __init config_BSP(char *commandp, int size) *pivrp = 0x40; #endif - mcf_disableall(); - #if defined(CONFIG_NETtel) || defined(CONFIG_SCALES) /* Copy command line from FLASH to local buffer... */ memcpy(commandp, (char *) 0xf0004000, size); @@ -202,8 +143,6 @@ void __init config_BSP(char *commandp, int size) commandp[size-1] = 0; #endif - mcf_timervector = 69; - mcf_profilevector = 70; mach_reset = m5272_cpu_reset; } @@ -212,7 +151,6 @@ void __init config_BSP(char *commandp, int size) static int __init init_BSP(void) { m5272_uarts_init(); - m5272_fec_init(); platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices)); return 0; } diff --git a/arch/m68knommu/platform/5272/gpio.c b/arch/m68knommu/platform/5272/gpio.c new file mode 100644 index 0000000..459db89 --- /dev/null +++ b/arch/m68knommu/platform/5272/gpio.c @@ -0,0 +1,81 @@ +/* + * Coldfire generic GPIO support + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfgpio.h> + +static struct mcf_gpio_chip mcf_gpio_chips[] = { + { + .gpio_chip = { + .label = "PA", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value, + .ngpio = 16, + }, + .pddr = MCFSIM_PADDR, + .podr = MCFSIM_PADAT, + .ppdr = MCFSIM_PADAT, + }, + { + .gpio_chip = { + .label = "PB", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value, + .base = 16, + .ngpio = 16, + }, + .pddr = MCFSIM_PBDDR, + .podr = MCFSIM_PBDAT, + .ppdr = MCFSIM_PBDAT, + }, + { + .gpio_chip = { + .label = "PC", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value, + .base = 32, + .ngpio = 16, + }, + .pddr = MCFSIM_PCDDR, + .podr = MCFSIM_PCDAT, + .ppdr = MCFSIM_PCDAT, + }, +}; + +static int __init mcf_gpio_init(void) +{ + unsigned i = 0; + while (i < ARRAY_SIZE(mcf_gpio_chips)) + (void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]); + return 0; +} + +core_initcall(mcf_gpio_init); diff --git a/arch/m68knommu/platform/5272/intc.c b/arch/m68knommu/platform/5272/intc.c new file mode 100644 index 0000000..7081e0a --- /dev/null +++ b/arch/m68knommu/platform/5272/intc.c @@ -0,0 +1,138 @@ +/* + * intc.c -- interrupt controller or ColdFire 5272 SoC + * + * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/traps.h> + +/* + * The 5272 ColdFire interrupt controller is nothing like any other + * ColdFire interrupt controller - it truly is completely different. + * Given its age it is unlikely to be used on any other ColdFire CPU. + */ + +/* + * The masking and priproty setting of interrupts on the 5272 is done + * via a set of 4 "Interrupt Controller Registers" (ICR). There is a + * loose mapping of vector number to register and internal bits, but + * a table is the easiest and quickest way to map them. + */ +struct irqmap { + unsigned char icr; + unsigned char index; + unsigned char ack; +}; + +static struct irqmap intc_irqmap[MCFINT_VECMAX - MCFINT_VECBASE] = { + /*MCF_IRQ_SPURIOUS*/ { .icr = 0, .index = 0, .ack = 0, }, + /*MCF_IRQ_EINT1*/ { .icr = MCFSIM_ICR1, .index = 28, .ack = 1, }, + /*MCF_IRQ_EINT2*/ { .icr = MCFSIM_ICR1, .index = 24, .ack = 1, }, + /*MCF_IRQ_EINT3*/ { .icr = MCFSIM_ICR1, .index = 20, .ack = 1, }, + /*MCF_IRQ_EINT4*/ { .icr = MCFSIM_ICR1, .index = 16, .ack = 1, }, + /*MCF_IRQ_TIMER1*/ { .icr = MCFSIM_ICR1, .index = 12, .ack = 0, }, + /*MCF_IRQ_TIMER2*/ { .icr = MCFSIM_ICR1, .index = 8, .ack = 0, }, + /*MCF_IRQ_TIMER3*/ { .icr = MCFSIM_ICR1, .index = 4, .ack = 0, }, + /*MCF_IRQ_TIMER4*/ { .icr = MCFSIM_ICR1, .index = 0, .ack = 0, }, + /*MCF_IRQ_UART1*/ { .icr = MCFSIM_ICR2, .index = 28, .ack = 0, }, + /*MCF_IRQ_UART2*/ { .icr = MCFSIM_ICR2, .index = 24, .ack = 0, }, + /*MCF_IRQ_PLIP*/ { .icr = MCFSIM_ICR2, .index = 20, .ack = 0, }, + /*MCF_IRQ_PLIA*/ { .icr = MCFSIM_ICR2, .index = 16, .ack = 0, }, + /*MCF_IRQ_USB0*/ { .icr = MCFSIM_ICR2, .index = 12, .ack = 0, }, + /*MCF_IRQ_USB1*/ { .icr = MCFSIM_ICR2, .index = 8, .ack = 0, }, + /*MCF_IRQ_USB2*/ { .icr = MCFSIM_ICR2, .index = 4, .ack = 0, }, + /*MCF_IRQ_USB3*/ { .icr = MCFSIM_ICR2, .index = 0, .ack = 0, }, + /*MCF_IRQ_USB4*/ { .icr = MCFSIM_ICR3, .index = 28, .ack = 0, }, + /*MCF_IRQ_USB5*/ { .icr = MCFSIM_ICR3, .index = 24, .ack = 0, }, + /*MCF_IRQ_USB6*/ { .icr = MCFSIM_ICR3, .index = 20, .ack = 0, }, + /*MCF_IRQ_USB7*/ { .icr = MCFSIM_ICR3, .index = 16, .ack = 0, }, + /*MCF_IRQ_DMA*/ { .icr = MCFSIM_ICR3, .index = 12, .ack = 0, }, + /*MCF_IRQ_ERX*/ { .icr = MCFSIM_ICR3, .index = 8, .ack = 0, }, + /*MCF_IRQ_ETX*/ { .icr = MCFSIM_ICR3, .index = 4, .ack = 0, }, + /*MCF_IRQ_ENTC*/ { .icr = MCFSIM_ICR3, .index = 0, .ack = 0, }, + /*MCF_IRQ_QSPI*/ { .icr = MCFSIM_ICR4, .index = 28, .ack = 0, }, + /*MCF_IRQ_EINT5*/ { .icr = MCFSIM_ICR4, .index = 24, .ack = 1, }, + /*MCF_IRQ_EINT6*/ { .icr = MCFSIM_ICR4, .index = 20, .ack = 1, }, + /*MCF_IRQ_SWTO*/ { .icr = MCFSIM_ICR4, .index = 16, .ack = 0, }, +}; + +static void intc_irq_mask(unsigned int irq) +{ + if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) { + u32 v; + irq -= MCFINT_VECBASE; + v = 0x8 << intc_irqmap[irq].index; + writel(v, MCF_MBAR + intc_irqmap[irq].icr); + } +} + +static void intc_irq_unmask(unsigned int irq) +{ + if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) { + u32 v; + irq -= MCFINT_VECBASE; + v = 0xd << intc_irqmap[irq].index; + writel(v, MCF_MBAR + intc_irqmap[irq].icr); + } +} + +static void intc_irq_ack(unsigned int irq) +{ + /* Only external interrupts are acked */ + if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) { + irq -= MCFINT_VECBASE; + if (intc_irqmap[irq].ack) { + u32 v; + v = 0xd << intc_irqmap[irq].index; + writel(v, MCF_MBAR + intc_irqmap[irq].icr); + } + } +} + +static int intc_irq_set_type(unsigned int irq, unsigned int type) +{ + /* We can set the edge type here for external interrupts */ + return 0; +} + +static struct irq_chip intc_irq_chip = { + .name = "CF-INTC", + .mask = intc_irq_mask, + .unmask = intc_irq_unmask, + .ack = intc_irq_ack, + .set_type = intc_irq_set_type, +}; + +void __init init_IRQ(void) +{ + int irq; + + init_vectors(); + + /* Mask all interrupt sources */ + writel(0x88888888, MCF_MBAR + MCFSIM_ICR1); + writel(0x88888888, MCF_MBAR + MCFSIM_ICR2); + writel(0x88888888, MCF_MBAR + MCFSIM_ICR3); + writel(0x88888888, MCF_MBAR + MCFSIM_ICR4); + + for (irq = 0; (irq < NR_IRQS); irq++) { + irq_desc[irq].status = IRQ_DISABLED; + irq_desc[irq].action = NULL; + irq_desc[irq].depth = 1; + irq_desc[irq].chip = &intc_irq_chip; + intc_irq_set_type(irq, 0); + } +} + diff --git a/arch/m68knommu/platform/527x/Makefile b/arch/m68knommu/platform/527x/Makefile index 26135d9..3d90e6d 100644 --- a/arch/m68knommu/platform/527x/Makefile +++ b/arch/m68knommu/platform/527x/Makefile @@ -14,5 +14,5 @@ asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 -obj-y := config.o +obj-y := config.o gpio.o diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c index f746439..fa51be1 100644 --- a/arch/m68knommu/platform/527x/config.c +++ b/arch/m68knommu/platform/527x/config.c @@ -116,23 +116,13 @@ static struct platform_device *m527x_devices[] __initdata = { /***************************************************************************/ -#define INTC0 (MCF_MBAR + MCFICM_INTC0) - static void __init m527x_uart_init_line(int line, int irq) { u16 sepmask; - u32 imr; if ((line < 0) || (line > 2)) return; - /* level 6, line based priority */ - writeb(0x30+line, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line); - - imr = readl(INTC0 + MCFINTC_IMRL); - imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1); - writel(imr, INTC0 + MCFINTC_IMRL); - /* * External Pin Mask Setting & Enable External Pin for Interface */ @@ -157,32 +147,11 @@ static void __init m527x_uarts_init(void) /***************************************************************************/ -static void __init m527x_fec_irq_init(int nr) -{ - unsigned long base; - u32 imr; - - base = MCF_IPSBAR + (nr ? MCFICM_INTC1 : MCFICM_INTC0); - - writeb(0x28, base + MCFINTC_ICR0 + 23); - writeb(0x27, base + MCFINTC_ICR0 + 27); - writeb(0x26, base + MCFINTC_ICR0 + 29); - - imr = readl(base + MCFINTC_IMRH); - imr &= ~0xf; - writel(imr, base + MCFINTC_IMRH); - imr = readl(base + MCFINTC_IMRL); - imr &= ~0xff800001; - writel(imr, base + MCFINTC_IMRL); -} - static void __init m527x_fec_init(void) { u16 par; u8 v; - m527x_fec_irq_init(0); - /* Set multi-function pins to ethernet mode for fec0 */ #if defined(CONFIG_M5271) v = readb(MCF_IPSBAR + 0x100047); @@ -195,8 +164,6 @@ static void __init m527x_fec_init(void) #endif #ifdef CONFIG_FEC2 - m527x_fec_irq_init(1); - /* Set multi-function pins to ethernet mode for fec1 */ par = readw(MCF_IPSBAR + 0x100082); writew(par | 0xa0, MCF_IPSBAR + 0x100082); @@ -207,21 +174,6 @@ static void __init m527x_fec_init(void) /***************************************************************************/ -void mcf_disableall(void) -{ - *((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff; - *((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff; -} - -/***************************************************************************/ - -void mcf_autovector(unsigned int vec) -{ - /* Everything is auto-vectored on the 5272 */ -} - -/***************************************************************************/ - static void m527x_cpu_reset(void) { local_irq_disable(); @@ -232,7 +184,6 @@ static void m527x_cpu_reset(void) void __init config_BSP(char *commandp, int size) { - mcf_disableall(); mach_reset = m527x_cpu_reset; m527x_uarts_init(); m527x_fec_init(); diff --git a/arch/m68knommu/platform/527x/gpio.c b/arch/m68knommu/platform/527x/gpio.c new file mode 100644 index 0000000..1028142 --- /dev/null +++ b/arch/m68knommu/platform/527x/gpio.c @@ -0,0 +1,607 @@ +/* + * Coldfire generic GPIO support + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfgpio.h> + +static struct mcf_gpio_chip mcf_gpio_chips[] = { +#if defined(CONFIG_M5271) + { + .gpio_chip = { + .label = "PIRQ", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value, + .ngpio = 8, + }, + .pddr = MCFEPORT_EPDDR, + .podr = MCFEPORT_EPDR, + .ppdr = MCFEPORT_EPPDR, + }, + { + .gpio_chip = { + .label = "ADDR", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 13, + .ngpio = 3, + }, + .pddr = MCFGPIO_PDDR_ADDR, + .podr = MCFGPIO_PODR_ADDR, + .ppdr = MCFGPIO_PPDSDR_ADDR, + .setr = MCFGPIO_PPDSDR_ADDR, + .clrr = MCFGPIO_PCLRR_ADDR, + }, + { + .gpio_chip = { + .label = "DATAH", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 16, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_DATAH, + .podr = MCFGPIO_PODR_DATAH, + .ppdr = MCFGPIO_PPDSDR_DATAH, + .setr = MCFGPIO_PPDSDR_DATAH, + .clrr = MCFGPIO_PCLRR_DATAH, + }, + { + .gpio_chip = { + .label = "DATAL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 24, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_DATAL, + .podr = MCFGPIO_PODR_DATAL, + .ppdr = MCFGPIO_PPDSDR_DATAL, + .setr = MCFGPIO_PPDSDR_DATAL, + .clrr = MCFGPIO_PCLRR_DATAL, + }, + { + .gpio_chip = { + .label = "BUSCTL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 32, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_BUSCTL, + .podr = MCFGPIO_PODR_BUSCTL, + .ppdr = MCFGPIO_PPDSDR_BUSCTL, + .setr = MCFGPIO_PPDSDR_BUSCTL, + .clrr = MCFGPIO_PCLRR_BUSCTL, + }, + { + .gpio_chip = { + .label = "BS", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 40, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_BS, + .podr = MCFGPIO_PODR_BS, + .ppdr = MCFGPIO_PPDSDR_BS, + .setr = MCFGPIO_PPDSDR_BS, + .clrr = MCFGPIO_PCLRR_BS, + }, + { + .gpio_chip = { + .label = "CS", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 49, + .ngpio = 7, + }, + .pddr = MCFGPIO_PDDR_CS, + .podr = MCFGPIO_PODR_CS, + .ppdr = MCFGPIO_PPDSDR_CS, + .setr = MCFGPIO_PPDSDR_CS, + .clrr = MCFGPIO_PCLRR_CS, + }, + { + .gpio_chip = { + .label = "SDRAM", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 56, + .ngpio = 6, + }, + .pddr = MCFGPIO_PDDR_SDRAM, + .podr = MCFGPIO_PODR_SDRAM, + .ppdr = MCFGPIO_PPDSDR_SDRAM, + .setr = MCFGPIO_PPDSDR_SDRAM, + .clrr = MCFGPIO_PCLRR_SDRAM, + }, + { + .gpio_chip = { + .label = "FECI2C", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 64, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_FECI2C, + .podr = MCFGPIO_PODR_FECI2C, + .ppdr = MCFGPIO_PPDSDR_FECI2C, + .setr = MCFGPIO_PPDSDR_FECI2C, + .clrr = MCFGPIO_PCLRR_FECI2C, + }, + { + .gpio_chip = { + .label = "UARTH", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 72, + .ngpio = 2, + }, + .pddr = MCFGPIO_PDDR_UARTH, + .podr = MCFGPIO_PODR_UARTH, + .ppdr = MCFGPIO_PPDSDR_UARTH, + .setr = MCFGPIO_PPDSDR_UARTH, + .clrr = MCFGPIO_PCLRR_UARTH, + }, + { + .gpio_chip = { + .label = "UARTL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 80, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_UARTL, + .podr = MCFGPIO_PODR_UARTL, + .ppdr = MCFGPIO_PPDSDR_UARTL, + .setr = MCFGPIO_PPDSDR_UARTL, + .clrr = MCFGPIO_PCLRR_UARTL, + }, + { + .gpio_chip = { + .label = "QSPI", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 88, + .ngpio = 5, + }, + .pddr = MCFGPIO_PDDR_QSPI, + .podr = MCFGPIO_PODR_QSPI, + .ppdr = MCFGPIO_PPDSDR_QSPI, + .setr = MCFGPIO_PPDSDR_QSPI, + .clrr = MCFGPIO_PCLRR_QSPI, + }, + { + .gpio_chip = { + .label = "TIMER", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 96, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_TIMER, + .podr = MCFGPIO_PODR_TIMER, + .ppdr = MCFGPIO_PPDSDR_TIMER, + .setr = MCFGPIO_PPDSDR_TIMER, + .clrr = MCFGPIO_PCLRR_TIMER, + }, +#elif defined(CONFIG_M5275) + { + .gpio_chip = { + .label = "PIRQ", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value, + .ngpio = 8, + }, + .pddr = MCFEPORT_EPDDR, + .podr = MCFEPORT_EPDR, + .ppdr = MCFEPORT_EPPDR, + }, + { + .gpio_chip = { + .label = "BUSCTL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 8, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_BUSCTL, + .podr = MCFGPIO_PODR_BUSCTL, + .ppdr = MCFGPIO_PPDSDR_BUSCTL, + .setr = MCFGPIO_PPDSDR_BUSCTL, + .clrr = MCFGPIO_PCLRR_BUSCTL, + }, + { + .gpio_chip = { + .label = "ADDR", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 21, + .ngpio = 3, + }, + .pddr = MCFGPIO_PDDR_ADDR, + .podr = MCFGPIO_PODR_ADDR, + .ppdr = MCFGPIO_PPDSDR_ADDR, + .setr = MCFGPIO_PPDSDR_ADDR, + .clrr = MCFGPIO_PCLRR_ADDR, + }, + { + .gpio_chip = { + .label = "CS", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 25, + .ngpio = 7, + }, + .pddr = MCFGPIO_PDDR_CS, + .podr = MCFGPIO_PODR_CS, + .ppdr = MCFGPIO_PPDSDR_CS, + .setr = MCFGPIO_PPDSDR_CS, + .clrr = MCFGPIO_PCLRR_CS, + }, + { + .gpio_chip = { + .label = "FEC0H", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 32, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_FEC0H, + .podr = MCFGPIO_PODR_FEC0H, + .ppdr = MCFGPIO_PPDSDR_FEC0H, + .setr = MCFGPIO_PPDSDR_FEC0H, + .clrr = MCFGPIO_PCLRR_FEC0H, + }, + { + .gpio_chip = { + .label = "FEC0L", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 40, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_FEC0L, + .podr = MCFGPIO_PODR_FEC0L, + .ppdr = MCFGPIO_PPDSDR_FEC0L, + .setr = MCFGPIO_PPDSDR_FEC0L, + .clrr = MCFGPIO_PCLRR_FEC0L, + }, + { + .gpio_chip = { + .label = "FECI2C", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 48, + .ngpio = 6, + }, + .pddr = MCFGPIO_PDDR_FECI2C, + .podr = MCFGPIO_PODR_FECI2C, + .ppdr = MCFGPIO_PPDSDR_FECI2C, + .setr = MCFGPIO_PPDSDR_FECI2C, + .clrr = MCFGPIO_PCLRR_FECI2C, + }, + { + .gpio_chip = { + .label = "QSPI", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 56, + .ngpio = 7, + }, + .pddr = MCFGPIO_PDDR_QSPI, + .podr = MCFGPIO_PODR_QSPI, + .ppdr = MCFGPIO_PPDSDR_QSPI, + .setr = MCFGPIO_PPDSDR_QSPI, + .clrr = MCFGPIO_PCLRR_QSPI, + }, + { + .gpio_chip = { + .label = "SDRAM", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 64, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_SDRAM, + .podr = MCFGPIO_PODR_SDRAM, + .ppdr = MCFGPIO_PPDSDR_SDRAM, + .setr = MCFGPIO_PPDSDR_SDRAM, + .clrr = MCFGPIO_PCLRR_SDRAM, + }, + { + .gpio_chip = { + .label = "TIMERH", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 72, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_TIMERH, + .podr = MCFGPIO_PODR_TIMERH, + .ppdr = MCFGPIO_PPDSDR_TIMERH, + .setr = MCFGPIO_PPDSDR_TIMERH, + .clrr = MCFGPIO_PCLRR_TIMERH, + }, + { + .gpio_chip = { + .label = "TIMERL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 80, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_TIMERL, + .podr = MCFGPIO_PODR_TIMERL, + .ppdr = MCFGPIO_PPDSDR_TIMERL, + .setr = MCFGPIO_PPDSDR_TIMERL, + .clrr = MCFGPIO_PCLRR_TIMERL, + }, + { + .gpio_chip = { + .label = "UARTL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 88, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_UARTL, + .podr = MCFGPIO_PODR_UARTL, + .ppdr = MCFGPIO_PPDSDR_UARTL, + .setr = MCFGPIO_PPDSDR_UARTL, + .clrr = MCFGPIO_PCLRR_UARTL, + }, + { + .gpio_chip = { + .label = "FEC1H", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 96, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_FEC1H, + .podr = MCFGPIO_PODR_FEC1H, + .ppdr = MCFGPIO_PPDSDR_FEC1H, + .setr = MCFGPIO_PPDSDR_FEC1H, + .clrr = MCFGPIO_PCLRR_FEC1H, + }, + { + .gpio_chip = { + .label = "FEC1L", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 104, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_FEC1L, + .podr = MCFGPIO_PODR_FEC1L, + .ppdr = MCFGPIO_PPDSDR_FEC1L, + .setr = MCFGPIO_PPDSDR_FEC1L, + .clrr = MCFGPIO_PCLRR_FEC1L, + }, + { + .gpio_chip = { + .label = "BS", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 114, + .ngpio = 2, + }, + .pddr = MCFGPIO_PDDR_BS, + .podr = MCFGPIO_PODR_BS, + .ppdr = MCFGPIO_PPDSDR_BS, + .setr = MCFGPIO_PPDSDR_BS, + .clrr = MCFGPIO_PCLRR_BS, + }, + { + .gpio_chip = { + .label = "IRQ", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 121, + .ngpio = 7, + }, + .pddr = MCFGPIO_PDDR_IRQ, + .podr = MCFGPIO_PODR_IRQ, + .ppdr = MCFGPIO_PPDSDR_IRQ, + .setr = MCFGPIO_PPDSDR_IRQ, + .clrr = MCFGPIO_PCLRR_IRQ, + }, + { + .gpio_chip = { + .label = "USBH", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 128, + .ngpio = 1, + }, + .pddr = MCFGPIO_PDDR_USBH, + .podr = MCFGPIO_PODR_USBH, + .ppdr = MCFGPIO_PPDSDR_USBH, + .setr = MCFGPIO_PPDSDR_USBH, + .clrr = MCFGPIO_PCLRR_USBH, + }, + { + .gpio_chip = { + .label = "USBL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 136, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_USBL, + .podr = MCFGPIO_PODR_USBL, + .ppdr = MCFGPIO_PPDSDR_USBL, + .setr = MCFGPIO_PPDSDR_USBL, + .clrr = MCFGPIO_PCLRR_USBL, + }, + { + .gpio_chip = { + .label = "UARTH", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 144, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_UARTH, + .podr = MCFGPIO_PODR_UARTH, + .ppdr = MCFGPIO_PPDSDR_UARTH, + .setr = MCFGPIO_PPDSDR_UARTH, + .clrr = MCFGPIO_PCLRR_UARTH, + }, +#endif +}; + +static int __init mcf_gpio_init(void) +{ + unsigned i = 0; + while (i < ARRAY_SIZE(mcf_gpio_chips)) + (void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]); + return 0; +} + +core_initcall(mcf_gpio_init); diff --git a/arch/m68knommu/platform/528x/Makefile b/arch/m68knommu/platform/528x/Makefile index 26135d9..3d90e6d 100644 --- a/arch/m68knommu/platform/528x/Makefile +++ b/arch/m68knommu/platform/528x/Makefile @@ -14,5 +14,5 @@ asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 -obj-y := config.o +obj-y := config.o gpio.o diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c index a1d1a61..6e608d1 100644 --- a/arch/m68knommu/platform/528x/config.c +++ b/arch/m68knommu/platform/528x/config.c @@ -3,8 +3,8 @@ /* * linux/arch/m68knommu/platform/528x/config.c * - * Sub-architcture dependant initialization code for the Motorola - * 5280 and 5282 CPUs. + * Sub-architcture dependant initialization code for the Freescale + * 5280, 5281 and 5282 CPUs. * * Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com) * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com) @@ -15,20 +15,13 @@ #include <linux/kernel.h> #include <linux/param.h> #include <linux/init.h> -#include <linux/interrupt.h> #include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> #include <linux/io.h> #include <asm/machdep.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> #include <asm/mcfuart.h> -#ifdef CONFIG_MTD_PARTITIONS -#include <linux/mtd/partitions.h> -#endif - /***************************************************************************/ static struct mcf_platform_uart m528x_uart_platform[] = { @@ -91,23 +84,13 @@ static struct platform_device *m528x_devices[] __initdata = { /***************************************************************************/ -#define INTC0 (MCF_MBAR + MCFICM_INTC0) - static void __init m528x_uart_init_line(int line, int irq) { u8 port; - u32 imr; if ((line < 0) || (line > 2)) return; - /* level 6, line based priority */ - writeb(0x30+line, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line); - - imr = readl(INTC0 + MCFINTC_IMRL); - imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1); - writel(imr, INTC0 + MCFINTC_IMRL); - /* make sure PUAPAR is set for UART0 and UART1 */ if (line < 2) { port = readb(MCF_MBAR + MCF5282_GPIO_PUAPAR); @@ -129,21 +112,8 @@ static void __init m528x_uarts_init(void) static void __init m528x_fec_init(void) { - u32 imr; u16 v16; - /* Unmask FEC interrupts at ColdFire interrupt controller */ - writeb(0x28, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 23); - writeb(0x27, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 27); - writeb(0x26, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 29); - - imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH); - imr &= ~0xf; - writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH); - imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL); - imr &= ~0xff800001; - writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL); - /* Set multi-function pins to ethernet mode for fec0 */ v16 = readw(MCF_IPSBAR + 0x100056); writew(v16 | 0xf00, MCF_IPSBAR + 0x100056); @@ -152,21 +122,6 @@ static void __init m528x_fec_init(void) /***************************************************************************/ -void mcf_disableall(void) -{ - *((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff; - *((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff; -} - -/***************************************************************************/ - -void mcf_autovector(unsigned int vec) -{ - /* Everything is auto-vectored on the 5272 */ -} - -/***************************************************************************/ - static void m528x_cpu_reset(void) { local_irq_disable(); @@ -204,8 +159,6 @@ void wildfiremod_halt(void) void __init config_BSP(char *commandp, int size) { - mcf_disableall(); - #ifdef CONFIG_WILDFIRE mach_halt = wildfire_halt; #endif diff --git a/arch/m68knommu/platform/528x/gpio.c b/arch/m68knommu/platform/528x/gpio.c new file mode 100644 index 0000000..ec59395 --- /dev/null +++ b/arch/m68knommu/platform/528x/gpio.c @@ -0,0 +1,438 @@ +/* + * Coldfire generic GPIO support + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfgpio.h> + +static struct mcf_gpio_chip mcf_gpio_chips[] = { + { + .gpio_chip = { + .label = "NQ", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value, + .base = 1, + .ngpio = 8, + }, + .pddr = MCFEPORT_EPDDR, + .podr = MCFEPORT_EPDR, + .ppdr = MCFEPORT_EPPDR, + }, + { + .gpio_chip = { + .label = "TA", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 8, + .ngpio = 4, + }, + .pddr = MCFGPTA_GPTDDR, + .podr = MCFGPTA_GPTPORT, + .ppdr = MCFGPTB_GPTPORT, + }, + { + .gpio_chip = { + .label = "TB", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 16, + .ngpio = 4, + }, + .pddr = MCFGPTB_GPTDDR, + .podr = MCFGPTB_GPTPORT, + .ppdr = MCFGPTB_GPTPORT, + }, + { + .gpio_chip = { + .label = "QA", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 24, + .ngpio = 4, + }, + .pddr = MCFQADC_DDRQA, + .podr = MCFQADC_PORTQA, + .ppdr = MCFQADC_PORTQA, + }, + { + .gpio_chip = { + .label = "QB", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 32, + .ngpio = 4, + }, + .pddr = MCFQADC_DDRQB, + .podr = MCFQADC_PORTQB, + .ppdr = MCFQADC_PORTQB, + }, + { + .gpio_chip = { + .label = "A", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 40, + .ngpio = 8, + }, + .pddr = MCFGPIO_DDRA, + .podr = MCFGPIO_PORTA, + .ppdr = MCFGPIO_PORTAP, + .setr = MCFGPIO_SETA, + .clrr = MCFGPIO_CLRA, + }, + { + .gpio_chip = { + .label = "B", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 48, + .ngpio = 8, + }, + .pddr = MCFGPIO_DDRB, + .podr = MCFGPIO_PORTB, + .ppdr = MCFGPIO_PORTBP, + .setr = MCFGPIO_SETB, + .clrr = MCFGPIO_CLRB, + }, + { + .gpio_chip = { + .label = "C", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 56, + .ngpio = 8, + }, + .pddr = MCFGPIO_DDRC, + .podr = MCFGPIO_PORTC, + .ppdr = MCFGPIO_PORTCP, + .setr = MCFGPIO_SETC, + .clrr = MCFGPIO_CLRC, + }, + { + .gpio_chip = { + .label = "D", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 64, + .ngpio = 8, + }, + .pddr = MCFGPIO_DDRD, + .podr = MCFGPIO_PORTD, + .ppdr = MCFGPIO_PORTDP, + .setr = MCFGPIO_SETD, + .clrr = MCFGPIO_CLRD, + }, + { + .gpio_chip = { + .label = "E", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 72, + .ngpio = 8, + }, + .pddr = MCFGPIO_DDRE, + .podr = MCFGPIO_PORTE, + .ppdr = MCFGPIO_PORTEP, + .setr = MCFGPIO_SETE, + .clrr = MCFGPIO_CLRE, + }, + { + .gpio_chip = { + .label = "F", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 80, + .ngpio = 8, + }, + .pddr = MCFGPIO_DDRF, + .podr = MCFGPIO_PORTF, + .ppdr = MCFGPIO_PORTFP, + .setr = MCFGPIO_SETF, + .clrr = MCFGPIO_CLRF, + }, + { + .gpio_chip = { + .label = "G", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 88, + .ngpio = 8, + }, + .pddr = MCFGPIO_DDRG, + .podr = MCFGPIO_PORTG, + .ppdr = MCFGPIO_PORTGP, + .setr = MCFGPIO_SETG, + .clrr = MCFGPIO_CLRG, + }, + { + .gpio_chip = { + .label = "H", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 96, + .ngpio = 8, + }, + .pddr = MCFGPIO_DDRH, + .podr = MCFGPIO_PORTH, + .ppdr = MCFGPIO_PORTHP, + .setr = MCFGPIO_SETH, + .clrr = MCFGPIO_CLRH, + }, + { + .gpio_chip = { + .label = "J", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 104, + .ngpio = 8, + }, + .pddr = MCFGPIO_DDRJ, + .podr = MCFGPIO_PORTJ, + .ppdr = MCFGPIO_PORTJP, + .setr = MCFGPIO_SETJ, + .clrr = MCFGPIO_CLRJ, + }, + { + .gpio_chip = { + .label = "DD", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 112, + .ngpio = 8, + }, + .pddr = MCFGPIO_DDRDD, + .podr = MCFGPIO_PORTDD, + .ppdr = MCFGPIO_PORTDDP, + .setr = MCFGPIO_SETDD, + .clrr = MCFGPIO_CLRDD, + }, + { + .gpio_chip = { + .label = "EH", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 120, + .ngpio = 8, + }, + .pddr = MCFGPIO_DDREH, + .podr = MCFGPIO_PORTEH, + .ppdr = MCFGPIO_PORTEHP, + .setr = MCFGPIO_SETEH, + .clrr = MCFGPIO_CLREH, + }, + { + .gpio_chip = { + .label = "EL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 128, + .ngpio = 8, + }, + .pddr = MCFGPIO_DDREL, + .podr = MCFGPIO_PORTEL, + .ppdr = MCFGPIO_PORTELP, + .setr = MCFGPIO_SETEL, + .clrr = MCFGPIO_CLREL, + }, + { + .gpio_chip = { + .label = "AS", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 136, + .ngpio = 6, + }, + .pddr = MCFGPIO_DDRAS, + .podr = MCFGPIO_PORTAS, + .ppdr = MCFGPIO_PORTASP, + .setr = MCFGPIO_SETAS, + .clrr = MCFGPIO_CLRAS, + }, + { + .gpio_chip = { + .label = "QS", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 144, + .ngpio = 7, + }, + .pddr = MCFGPIO_DDRQS, + .podr = MCFGPIO_PORTQS, + .ppdr = MCFGPIO_PORTQSP, + .setr = MCFGPIO_SETQS, + .clrr = MCFGPIO_CLRQS, + }, + { + .gpio_chip = { + .label = "SD", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 152, + .ngpio = 6, + }, + .pddr = MCFGPIO_DDRSD, + .podr = MCFGPIO_PORTSD, + .ppdr = MCFGPIO_PORTSDP, + .setr = MCFGPIO_SETSD, + .clrr = MCFGPIO_CLRSD, + }, + { + .gpio_chip = { + .label = "TC", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 160, + .ngpio = 4, + }, + .pddr = MCFGPIO_DDRTC, + .podr = MCFGPIO_PORTTC, + .ppdr = MCFGPIO_PORTTCP, + .setr = MCFGPIO_SETTC, + .clrr = MCFGPIO_CLRTC, + }, + { + .gpio_chip = { + .label = "TD", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 168, + .ngpio = 4, + }, + .pddr = MCFGPIO_DDRTD, + .podr = MCFGPIO_PORTTD, + .ppdr = MCFGPIO_PORTTDP, + .setr = MCFGPIO_SETTD, + .clrr = MCFGPIO_CLRTD, + }, + { + .gpio_chip = { + .label = "UA", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 176, + .ngpio = 4, + }, + .pddr = MCFGPIO_DDRUA, + .podr = MCFGPIO_PORTUA, + .ppdr = MCFGPIO_PORTUAP, + .setr = MCFGPIO_SETUA, + .clrr = MCFGPIO_CLRUA, + }, +}; + +static int __init mcf_gpio_init(void) +{ + unsigned i = 0; + while (i < ARRAY_SIZE(mcf_gpio_chips)) + (void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]); + return 0; +} + +core_initcall(mcf_gpio_init); diff --git a/arch/m68knommu/platform/5307/Makefile b/arch/m68knommu/platform/5307/Makefile index cfd5868..667db65 100644 --- a/arch/m68knommu/platform/5307/Makefile +++ b/arch/m68knommu/platform/5307/Makefile @@ -14,5 +14,5 @@ asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 -obj-y += config.o +obj-y += config.o gpio.o diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c index 39da9e9..00900ac 100644 --- a/arch/m68knommu/platform/5307/config.c +++ b/arch/m68knommu/platform/5307/config.c @@ -21,12 +21,6 @@ /***************************************************************************/ -extern unsigned int mcf_timervector; -extern unsigned int mcf_profilevector; -extern unsigned int mcf_timerlevel; - -/***************************************************************************/ - /* * Some platforms need software versions of the GPIO data registers. */ @@ -64,11 +58,11 @@ static void __init m5307_uart_init_line(int line, int irq) if (line == 0) { writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR); - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1); + mcf_mapirq2imr(irq, MCFINTC_UART0); } else if (line == 1) { writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR); - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2); + mcf_mapirq2imr(irq, MCFINTC_UART1); } } @@ -83,35 +77,19 @@ static void __init m5307_uarts_init(void) /***************************************************************************/ -void mcf_autovector(unsigned int vec) -{ - volatile unsigned char *mbar; - - if ((vec >= 25) && (vec <= 31)) { - mbar = (volatile unsigned char *) MCF_MBAR; - vec = 0x1 << (vec - 24); - *(mbar + MCFSIM_AVR) |= vec; - mcf_setimr(mcf_getimr() & ~vec); - } -} - -/***************************************************************************/ - -void mcf_settimericr(unsigned int timer, unsigned int level) +static void __init m5307_timers_init(void) { - volatile unsigned char *icrp; - unsigned int icr, imr; - - if (timer <= 2) { - switch (timer) { - case 2: icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break; - default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break; - } - - icrp = (volatile unsigned char *) (MCF_MBAR + icr); - *icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3; - mcf_setimr(mcf_getimr() & ~imr); - } + /* Timer1 is always used as system timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER1ICR); + mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1); + +#ifdef CONFIG_HIGHPROFILE + /* Timer2 is to be used as a high speed profile timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER2ICR); + mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2); +#endif } /***************************************************************************/ @@ -129,20 +107,22 @@ void m5307_cpu_reset(void) void __init config_BSP(char *commandp, int size) { - mcf_setimr(MCFSIM_IMR_MASKALL); - #if defined(CONFIG_NETtel) || \ defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA) /* Copy command line from FLASH to local buffer... */ memcpy(commandp, (char *) 0xf0004000, size); commandp[size-1] = 0; - /* Different timer setup - to prevent device clash */ - mcf_timervector = 30; - mcf_profilevector = 31; - mcf_timerlevel = 6; #endif mach_reset = m5307_cpu_reset; + m5307_timers_init(); + m5307_uarts_init(); + + /* Only support the external interrupts on their primary level */ + mcf_mapirq2imr(25, MCFINTC_EINT1); + mcf_mapirq2imr(27, MCFINTC_EINT3); + mcf_mapirq2imr(29, MCFINTC_EINT5); + mcf_mapirq2imr(31, MCFINTC_EINT7); #ifdef CONFIG_BDM_DISABLE /* @@ -158,7 +138,6 @@ void __init config_BSP(char *commandp, int size) static int __init init_BSP(void) { - m5307_uarts_init(); platform_add_devices(m5307_devices, ARRAY_SIZE(m5307_devices)); return 0; } diff --git a/arch/m68knommu/platform/5307/gpio.c b/arch/m68knommu/platform/5307/gpio.c new file mode 100644 index 0000000..8da5880 --- /dev/null +++ b/arch/m68knommu/platform/5307/gpio.c @@ -0,0 +1,49 @@ +/* + * Coldfire generic GPIO support + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfgpio.h> + +static struct mcf_gpio_chip mcf_gpio_chips[] = { + { + .gpio_chip = { + .label = "PP", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value, + .ngpio = 16, + }, + .pddr = MCFSIM_PADDR, + .podr = MCFSIM_PADAT, + .ppdr = MCFSIM_PADAT, + }, +}; + +static int __init mcf_gpio_init(void) +{ + unsigned i = 0; + while (i < ARRAY_SIZE(mcf_gpio_chips)) + (void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]); + return 0; +} + +core_initcall(mcf_gpio_init); diff --git a/arch/m68knommu/platform/532x/Makefile b/arch/m68knommu/platform/532x/Makefile index e431912..4cc2324 100644 --- a/arch/m68knommu/platform/532x/Makefile +++ b/arch/m68knommu/platform/532x/Makefile @@ -15,4 +15,4 @@ asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 #obj-y := config.o usb-mcf532x.o spi-mcf532x.o -obj-y := config.o +obj-y := config.o gpio.o diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c index cdb7619..d632948 100644 --- a/arch/m68knommu/platform/532x/config.c +++ b/arch/m68knommu/platform/532x/config.c @@ -20,7 +20,6 @@ #include <linux/kernel.h> #include <linux/param.h> #include <linux/init.h> -#include <linux/interrupt.h> #include <linux/io.h> #include <asm/machdep.h> #include <asm/coldfire.h> @@ -31,12 +30,6 @@ /***************************************************************************/ -extern unsigned int mcf_timervector; -extern unsigned int mcf_profilevector; -extern unsigned int mcf_timerlevel; - -/***************************************************************************/ - static struct mcf_platform_uart m532x_uart_platform[] = { { .mapbase = MCFUART_BASE1, @@ -88,6 +81,7 @@ static struct platform_device m532x_fec = { .num_resources = ARRAY_SIZE(m532x_fec_resources), .resource = m532x_fec_resources, }; + static struct platform_device *m532x_devices[] __initdata = { &m532x_uart, &m532x_fec, @@ -98,18 +92,11 @@ static struct platform_device *m532x_devices[] __initdata = { static void __init m532x_uart_init_line(int line, int irq) { if (line == 0) { - MCF_INTC0_ICR26 = 0x3; - MCF_INTC0_CIMR = 26; /* GPIO initialization */ MCF_GPIO_PAR_UART |= 0x000F; } else if (line == 1) { - MCF_INTC0_ICR27 = 0x3; - MCF_INTC0_CIMR = 27; /* GPIO initialization */ MCF_GPIO_PAR_UART |= 0x0FF0; - } else if (line == 2) { - MCF_INTC0_ICR28 = 0x3; - MCF_INTC0_CIMR = 28; } } @@ -125,14 +112,6 @@ static void __init m532x_uarts_init(void) static void __init m532x_fec_init(void) { - /* Unmask FEC interrupts at ColdFire interrupt controller */ - MCF_INTC0_ICR36 = 0x2; - MCF_INTC0_ICR40 = 0x2; - MCF_INTC0_ICR42 = 0x2; - - MCF_INTC0_IMRH &= ~(MCF_INTC_IMRH_INT_MASK36 | - MCF_INTC_IMRH_INT_MASK40 | MCF_INTC_IMRH_INT_MASK42); - /* Set multi-function pins to ethernet mode for fec0 */ MCF_GPIO_PAR_FECI2C |= (MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC | MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO); @@ -142,26 +121,6 @@ static void __init m532x_fec_init(void) /***************************************************************************/ -void mcf_settimericr(unsigned int timer, unsigned int level) -{ - volatile unsigned char *icrp; - unsigned int icr; - unsigned char irq; - - if (timer <= 2) { - switch (timer) { - case 2: irq = 33; icr = MCFSIM_ICR_TIMER2; break; - default: irq = 32; icr = MCFSIM_ICR_TIMER1; break; - } - - icrp = (volatile unsigned char *) (icr); - *icrp = level; - mcf_enable_irq0(irq); - } -} - -/***************************************************************************/ - static void m532x_cpu_reset(void) { local_irq_disable(); @@ -172,8 +131,6 @@ static void m532x_cpu_reset(void) void __init config_BSP(char *commandp, int size) { - mcf_setimr(MCFSIM_IMR_MASKALL); - #if !defined(CONFIG_BOOTPARAM) /* Copy command line from FLASH to local buffer... */ memcpy(commandp, (char *) 0x4000, 4); @@ -185,10 +142,6 @@ void __init config_BSP(char *commandp, int size) } #endif - mcf_timervector = 64+32; - mcf_profilevector = 64+33; - mach_reset = m532x_cpu_reset; - #ifdef CONFIG_BDM_DISABLE /* * Disable the BDM clocking. This also turns off most of the rest of @@ -438,8 +391,8 @@ void gpio_init(void) /* Initialize TIN3 as a GPIO output to enable the write half of the latch */ MCF_GPIO_PAR_TIMER = 0x00; - MCF_GPIO_PDDR_TIMER = 0x08; - MCF_GPIO_PCLRR_TIMER = 0x0; + __raw_writeb(0x08, MCFGPIO_PDDR_TIMER); + __raw_writeb(0x00, MCFGPIO_PCLRR_TIMER); } diff --git a/arch/m68knommu/platform/532x/gpio.c b/arch/m68knommu/platform/532x/gpio.c new file mode 100644 index 0000000..184b773 --- /dev/null +++ b/arch/m68knommu/platform/532x/gpio.c @@ -0,0 +1,337 @@ +/* + * Coldfire generic GPIO support + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfgpio.h> + +static struct mcf_gpio_chip mcf_gpio_chips[] = { + { + .gpio_chip = { + .label = "PIRQ", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value, + .ngpio = 8, + }, + .pddr = MCFEPORT_EPDDR, + .podr = MCFEPORT_EPDR, + .ppdr = MCFEPORT_EPPDR, + }, + { + .gpio_chip = { + .label = "FECH", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 8, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_FECH, + .podr = MCFGPIO_PODR_FECH, + .ppdr = MCFGPIO_PPDSDR_FECH, + .setr = MCFGPIO_PPDSDR_FECH, + .clrr = MCFGPIO_PCLRR_FECH, + }, + { + .gpio_chip = { + .label = "FECL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 16, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_FECL, + .podr = MCFGPIO_PODR_FECL, + .ppdr = MCFGPIO_PPDSDR_FECL, + .setr = MCFGPIO_PPDSDR_FECL, + .clrr = MCFGPIO_PCLRR_FECL, + }, + { + .gpio_chip = { + .label = "SSI", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 24, + .ngpio = 5, + }, + .pddr = MCFGPIO_PDDR_SSI, + .podr = MCFGPIO_PODR_SSI, + .ppdr = MCFGPIO_PPDSDR_SSI, + .setr = MCFGPIO_PPDSDR_SSI, + .clrr = MCFGPIO_PCLRR_SSI, + }, + { + .gpio_chip = { + .label = "BUSCTL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 32, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_BUSCTL, + .podr = MCFGPIO_PODR_BUSCTL, + .ppdr = MCFGPIO_PPDSDR_BUSCTL, + .setr = MCFGPIO_PPDSDR_BUSCTL, + .clrr = MCFGPIO_PCLRR_BUSCTL, + }, + { + .gpio_chip = { + .label = "BE", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 40, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_BE, + .podr = MCFGPIO_PODR_BE, + .ppdr = MCFGPIO_PPDSDR_BE, + .setr = MCFGPIO_PPDSDR_BE, + .clrr = MCFGPIO_PCLRR_BE, + }, + { + .gpio_chip = { + .label = "CS", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 49, + .ngpio = 5, + }, + .pddr = MCFGPIO_PDDR_CS, + .podr = MCFGPIO_PODR_CS, + .ppdr = MCFGPIO_PPDSDR_CS, + .setr = MCFGPIO_PPDSDR_CS, + .clrr = MCFGPIO_PCLRR_CS, + }, + { + .gpio_chip = { + .label = "PWM", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 58, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_PWM, + .podr = MCFGPIO_PODR_PWM, + .ppdr = MCFGPIO_PPDSDR_PWM, + .setr = MCFGPIO_PPDSDR_PWM, + .clrr = MCFGPIO_PCLRR_PWM, + }, + { + .gpio_chip = { + .label = "FECI2C", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 64, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_FECI2C, + .podr = MCFGPIO_PODR_FECI2C, + .ppdr = MCFGPIO_PPDSDR_FECI2C, + .setr = MCFGPIO_PPDSDR_FECI2C, + .clrr = MCFGPIO_PCLRR_FECI2C, + }, + { + .gpio_chip = { + .label = "UART", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 72, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_UART, + .podr = MCFGPIO_PODR_UART, + .ppdr = MCFGPIO_PPDSDR_UART, + .setr = MCFGPIO_PPDSDR_UART, + .clrr = MCFGPIO_PCLRR_UART, + }, + { + .gpio_chip = { + .label = "QSPI", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 80, + .ngpio = 6, + }, + .pddr = MCFGPIO_PDDR_QSPI, + .podr = MCFGPIO_PODR_QSPI, + .ppdr = MCFGPIO_PPDSDR_QSPI, + .setr = MCFGPIO_PPDSDR_QSPI, + .clrr = MCFGPIO_PCLRR_QSPI, + }, + { + .gpio_chip = { + .label = "TIMER", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 88, + .ngpio = 4, + }, + .pddr = MCFGPIO_PDDR_TIMER, + .podr = MCFGPIO_PODR_TIMER, + .ppdr = MCFGPIO_PPDSDR_TIMER, + .setr = MCFGPIO_PPDSDR_TIMER, + .clrr = MCFGPIO_PCLRR_TIMER, + }, + { + .gpio_chip = { + .label = "LCDDATAH", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 96, + .ngpio = 2, + }, + .pddr = MCFGPIO_PDDR_LCDDATAH, + .podr = MCFGPIO_PODR_LCDDATAH, + .ppdr = MCFGPIO_PPDSDR_LCDDATAH, + .setr = MCFGPIO_PPDSDR_LCDDATAH, + .clrr = MCFGPIO_PCLRR_LCDDATAH, + }, + { + .gpio_chip = { + .label = "LCDDATAM", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 104, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_LCDDATAM, + .podr = MCFGPIO_PODR_LCDDATAM, + .ppdr = MCFGPIO_PPDSDR_LCDDATAM, + .setr = MCFGPIO_PPDSDR_LCDDATAM, + .clrr = MCFGPIO_PCLRR_LCDDATAM, + }, + { + .gpio_chip = { + .label = "LCDDATAL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 112, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_LCDDATAL, + .podr = MCFGPIO_PODR_LCDDATAL, + .ppdr = MCFGPIO_PPDSDR_LCDDATAL, + .setr = MCFGPIO_PPDSDR_LCDDATAL, + .clrr = MCFGPIO_PCLRR_LCDDATAL, + }, + { + .gpio_chip = { + .label = "LCDCTLH", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 120, + .ngpio = 1, + }, + .pddr = MCFGPIO_PDDR_LCDCTLH, + .podr = MCFGPIO_PODR_LCDCTLH, + .ppdr = MCFGPIO_PPDSDR_LCDCTLH, + .setr = MCFGPIO_PPDSDR_LCDCTLH, + .clrr = MCFGPIO_PCLRR_LCDCTLH, + }, + { + .gpio_chip = { + .label = "LCDCTLL", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value_fast, + .base = 128, + .ngpio = 8, + }, + .pddr = MCFGPIO_PDDR_LCDCTLL, + .podr = MCFGPIO_PODR_LCDCTLL, + .ppdr = MCFGPIO_PPDSDR_LCDCTLL, + .setr = MCFGPIO_PPDSDR_LCDCTLL, + .clrr = MCFGPIO_PCLRR_LCDCTLL, + }, +}; + +static int __init mcf_gpio_init(void) +{ + unsigned i = 0; + while (i < ARRAY_SIZE(mcf_gpio_chips)) + (void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]); + return 0; +} + +core_initcall(mcf_gpio_init); diff --git a/arch/m68knommu/platform/5407/Makefile b/arch/m68knommu/platform/5407/Makefile index e6035e7..dee62c5 100644 --- a/arch/m68knommu/platform/5407/Makefile +++ b/arch/m68knommu/platform/5407/Makefile @@ -14,5 +14,5 @@ asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 -obj-y := config.o +obj-y := config.o gpio.o diff --git a/arch/m68knommu/platform/5407/config.c b/arch/m68knommu/platform/5407/config.c index b41d942..70ea789 100644 --- a/arch/m68knommu/platform/5407/config.c +++ b/arch/m68knommu/platform/5407/config.c @@ -20,12 +20,6 @@ /***************************************************************************/ -extern unsigned int mcf_timervector; -extern unsigned int mcf_profilevector; -extern unsigned int mcf_timerlevel; - -/***************************************************************************/ - static struct mcf_platform_uart m5407_uart_platform[] = { { .mapbase = MCF_MBAR + MCFUART_BASE1, @@ -55,11 +49,11 @@ static void __init m5407_uart_init_line(int line, int irq) if (line == 0) { writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR); - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1); + mcf_mapirq2imr(irq, MCFINTC_UART0); } else if (line == 1) { writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR); - mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2); + mcf_mapirq2imr(irq, MCFINTC_UART1); } } @@ -74,35 +68,19 @@ static void __init m5407_uarts_init(void) /***************************************************************************/ -void mcf_autovector(unsigned int vec) -{ - volatile unsigned char *mbar; - - if ((vec >= 25) && (vec <= 31)) { - mbar = (volatile unsigned char *) MCF_MBAR; - vec = 0x1 << (vec - 24); - *(mbar + MCFSIM_AVR) |= vec; - mcf_setimr(mcf_getimr() & ~vec); - } -} - -/***************************************************************************/ - -void mcf_settimericr(unsigned int timer, unsigned int level) +static void __init m5407_timers_init(void) { - volatile unsigned char *icrp; - unsigned int icr, imr; - - if (timer <= 2) { - switch (timer) { - case 2: icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break; - default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break; - } - - icrp = (volatile unsigned char *) (MCF_MBAR + icr); - *icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3; - mcf_setimr(mcf_getimr() & ~imr); - } + /* Timer1 is always used as system timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER1ICR); + mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1); + +#ifdef CONFIG_HIGHPROFILE + /* Timer2 is to be used as a high speed profile timer */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, + MCF_MBAR + MCFSIM_TIMER2ICR); + mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2); +#endif } /***************************************************************************/ @@ -120,23 +98,21 @@ void m5407_cpu_reset(void) void __init config_BSP(char *commandp, int size) { - mcf_setimr(MCFSIM_IMR_MASKALL); - -#if defined(CONFIG_CLEOPATRA) - /* Different timer setup - to prevent device clash */ - mcf_timervector = 30; - mcf_profilevector = 31; - mcf_timerlevel = 6; -#endif - mach_reset = m5407_cpu_reset; + m5407_timers_init(); + m5407_uarts_init(); + + /* Only support the external interrupts on their primary level */ + mcf_mapirq2imr(25, MCFINTC_EINT1); + mcf_mapirq2imr(27, MCFINTC_EINT3); + mcf_mapirq2imr(29, MCFINTC_EINT5); + mcf_mapirq2imr(31, MCFINTC_EINT7); } /***************************************************************************/ static int __init init_BSP(void) { - m5407_uarts_init(); platform_add_devices(m5407_devices, ARRAY_SIZE(m5407_devices)); return 0; } diff --git a/arch/m68knommu/platform/5407/gpio.c b/arch/m68knommu/platform/5407/gpio.c new file mode 100644 index 0000000..8da5880 --- /dev/null +++ b/arch/m68knommu/platform/5407/gpio.c @@ -0,0 +1,49 @@ +/* + * Coldfire generic GPIO support + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfgpio.h> + +static struct mcf_gpio_chip mcf_gpio_chips[] = { + { + .gpio_chip = { + .label = "PP", + .request = mcf_gpio_request, + .free = mcf_gpio_free, + .direction_input = mcf_gpio_direction_input, + .direction_output = mcf_gpio_direction_output, + .get = mcf_gpio_get_value, + .set = mcf_gpio_set_value, + .ngpio = 16, + }, + .pddr = MCFSIM_PADDR, + .podr = MCFSIM_PADAT, + .ppdr = MCFSIM_PADAT, + }, +}; + +static int __init mcf_gpio_init(void) +{ + unsigned i = 0; + while (i < ARRAY_SIZE(mcf_gpio_chips)) + (void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]); + return 0; +} + +core_initcall(mcf_gpio_init); diff --git a/arch/m68knommu/platform/68328/ints.c b/arch/m68knommu/platform/68328/ints.c index 72e56d5..b91ee85 100644 --- a/arch/m68knommu/platform/68328/ints.c +++ b/arch/m68knommu/platform/68328/ints.c @@ -73,34 +73,6 @@ extern e_vector *_ramvec; /* The number of spurious interrupts */ volatile unsigned int num_spurious; -/* - * This function should be called during kernel startup to initialize - * the machine vector table. - */ -void __init init_vectors(void) -{ - int i; - - /* set up the vectors */ - for (i = 72; i < 256; ++i) - _ramvec[i] = (e_vector) bad_interrupt; - - _ramvec[32] = system_call; - - _ramvec[65] = (e_vector) inthandler1; - _ramvec[66] = (e_vector) inthandler2; - _ramvec[67] = (e_vector) inthandler3; - _ramvec[68] = (e_vector) inthandler4; - _ramvec[69] = (e_vector) inthandler5; - _ramvec[70] = (e_vector) inthandler6; - _ramvec[71] = (e_vector) inthandler7; - - IVR = 0x40; /* Set DragonBall IVR (interrupt base) to 64 */ - - /* turn off all interrupts */ - IMR = ~0; -} - /* The 68k family did not have a good way to determine the source * of interrupts until later in the family. The EC000 core does * not provide the vector number on the stack, we vector everything @@ -163,18 +135,54 @@ void process_int(int vec, struct pt_regs *fp) } } -void enable_vector(unsigned int irq) +static void intc_irq_unmask(unsigned int irq) { IMR &= ~(1<<irq); } -void disable_vector(unsigned int irq) +static void intc_irq_mask(unsigned int irq) { IMR |= (1<<irq); } -void ack_vector(unsigned int irq) +static struct irq_chip intc_irq_chip = { + .name = "M68K-INTC", + .mask = intc_irq_mask, + .unmask = intc_irq_unmask, +}; + +/* + * This function should be called during kernel startup to initialize + * the machine vector table. + */ +void __init init_IRQ(void) { - /* Nothing needed */ + int i; + + /* set up the vectors */ + for (i = 72; i < 256; ++i) + _ramvec[i] = (e_vector) bad_interrupt; + + _ramvec[32] = system_call; + + _ramvec[65] = (e_vector) inthandler1; + _ramvec[66] = (e_vector) inthandler2; + _ramvec[67] = (e_vector) inthandler3; + _ramvec[68] = (e_vector) inthandler4; + _ramvec[69] = (e_vector) inthandler5; + _ramvec[70] = (e_vector) inthandler6; + _ramvec[71] = (e_vector) inthandler7; + + IVR = 0x40; /* Set DragonBall IVR (interrupt base) to 64 */ + + /* turn off all interrupts */ + IMR = ~0; + + for (i = 0; (i < NR_IRQS); i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + irq_desc[i].chip = &intc_irq_chip; + } } diff --git a/arch/m68knommu/platform/68360/ints.c b/arch/m68knommu/platform/68360/ints.c index c367811..1143f77 100644 --- a/arch/m68knommu/platform/68360/ints.c +++ b/arch/m68knommu/platform/68360/ints.c @@ -37,11 +37,33 @@ extern void *_ramvec[]; /* The number of spurious interrupts */ volatile unsigned int num_spurious; +static void intc_irq_unmask(unsigned int irq) +{ + pquicc->intr_cimr |= (1 << irq); +} + +static void intc_irq_mask(unsigned int irq) +{ + pquicc->intr_cimr &= ~(1 << irq); +} + +static void intc_irq_ack(unsigned int irq) +{ + pquicc->intr_cisr = (1 << irq); +} + +static struct irq_chip intc_irq_chip = { + .name = "M68K-INTC", + .mask = intc_irq_mask, + .unmask = intc_irq_unmask, + .ack = intc_irq_ack, +}; + /* * This function should be called during kernel startup to initialize * the vector table. */ -void init_vectors(void) +void init_IRQ(void) { int i; int vba = (CPM_VECTOR_BASE<<4); @@ -109,20 +131,12 @@ void init_vectors(void) /* turn off all CPM interrupts */ pquicc->intr_cimr = 0x00000000; -} - -void enable_vector(unsigned int irq) -{ - pquicc->intr_cimr |= (1 << irq); -} -void disable_vector(unsigned int irq) -{ - pquicc->intr_cimr &= ~(1 << irq); -} - -void ack_vector(unsigned int irq) -{ - pquicc->intr_cisr = (1 << irq); + for (i = 0; (i < NR_IRQS); i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + irq_desc[i].chip = &intc_irq_chip; + } } diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile index 1bcb937..f72a0e5 100644 --- a/arch/m68knommu/platform/coldfire/Makefile +++ b/arch/m68knommu/platform/coldfire/Makefile @@ -15,16 +15,17 @@ asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 obj-$(CONFIG_COLDFIRE) += clk.o dma.o entry.o vectors.o -obj-$(CONFIG_M5206) += timers.o -obj-$(CONFIG_M5206e) += timers.o -obj-$(CONFIG_M520x) += pit.o -obj-$(CONFIG_M523x) += pit.o dma_timer.o -obj-$(CONFIG_M5249) += timers.o -obj-$(CONFIG_M527x) += pit.o +obj-$(CONFIG_M5206) += timers.o intc.o +obj-$(CONFIG_M5206e) += timers.o intc.o +obj-$(CONFIG_M520x) += pit.o intc-simr.o +obj-$(CONFIG_M523x) += pit.o dma_timer.o intc-2.o +obj-$(CONFIG_M5249) += timers.o intc.o +obj-$(CONFIG_M527x) += pit.o intc-2.o obj-$(CONFIG_M5272) += timers.o -obj-$(CONFIG_M528x) += pit.o -obj-$(CONFIG_M5307) += timers.o -obj-$(CONFIG_M532x) += timers.o -obj-$(CONFIG_M5407) += timers.o +obj-$(CONFIG_M528x) += pit.o intc-2.o +obj-$(CONFIG_M5307) += timers.o intc.o +obj-$(CONFIG_M532x) += timers.o intc-simr.o +obj-$(CONFIG_M5407) += timers.o intc.o +obj-y += pinmux.o gpio.o extra-y := head.o diff --git a/arch/m68knommu/platform/coldfire/gpio.c b/arch/m68knommu/platform/coldfire/gpio.c new file mode 100644 index 0000000..ff004579 --- /dev/null +++ b/arch/m68knommu/platform/coldfire/gpio.c @@ -0,0 +1,127 @@ +/* + * Coldfire generic GPIO support. + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sysdev.h> + +#include <asm/gpio.h> +#include <asm/pinmux.h> +#include <asm/mcfgpio.h> + +#define MCF_CHIP(chip) container_of(chip, struct mcf_gpio_chip, gpio_chip) + +int mcf_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + unsigned long flags; + MCFGPIO_PORTTYPE dir; + struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip); + + local_irq_save(flags); + dir = mcfgpio_read(mcf_chip->pddr); + dir &= ~mcfgpio_bit(chip->base + offset); + mcfgpio_write(dir, mcf_chip->pddr); + local_irq_restore(flags); + + return 0; +} + +int mcf_gpio_get_value(struct gpio_chip *chip, unsigned offset) +{ + struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip); + + return mcfgpio_read(mcf_chip->ppdr) & mcfgpio_bit(chip->base + offset); +} + +int mcf_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + unsigned long flags; + MCFGPIO_PORTTYPE data; + struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip); + + local_irq_save(flags); + /* write the value to the output latch */ + data = mcfgpio_read(mcf_chip->podr); + if (value) + data |= mcfgpio_bit(chip->base + offset); + else + data &= ~mcfgpio_bit(chip->base + offset); + mcfgpio_write(data, mcf_chip->podr); + + /* now set the direction to output */ + data = mcfgpio_read(mcf_chip->pddr); + data |= mcfgpio_bit(chip->base + offset); + mcfgpio_write(data, mcf_chip->pddr); + local_irq_restore(flags); + + return 0; +} + +void mcf_gpio_set_value(struct gpio_chip *chip, unsigned offset, int value) +{ + struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip); + + unsigned long flags; + MCFGPIO_PORTTYPE data; + + local_irq_save(flags); + data = mcfgpio_read(mcf_chip->podr); + if (value) + data |= mcfgpio_bit(chip->base + offset); + else + data &= ~mcfgpio_bit(chip->base + offset); + mcfgpio_write(data, mcf_chip->podr); + local_irq_restore(flags); +} + +void mcf_gpio_set_value_fast(struct gpio_chip *chip, unsigned offset, int value) +{ + struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip); + + if (value) + mcfgpio_write(mcfgpio_bit(chip->base + offset), mcf_chip->setr); + else + mcfgpio_write(~mcfgpio_bit(chip->base + offset), mcf_chip->clrr); +} + +int mcf_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip); + + return mcf_chip->gpio_to_pinmux ? + mcf_pinmux_request(mcf_chip->gpio_to_pinmux[offset], 0) : 0; +} + +void mcf_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip); + + mcf_gpio_direction_input(chip, offset); + + if (mcf_chip->gpio_to_pinmux) + mcf_pinmux_release(mcf_chip->gpio_to_pinmux[offset], 0); +} + +struct sysdev_class mcf_gpio_sysclass = { + .name = "gpio", +}; + +static int __init mcf_gpio_sysinit(void) +{ + return sysdev_class_register(&mcf_gpio_sysclass); +} + +core_initcall(mcf_gpio_sysinit); diff --git a/arch/m68knommu/platform/coldfire/intc-2.c b/arch/m68knommu/platform/coldfire/intc-2.c new file mode 100644 index 0000000..5598c8b --- /dev/null +++ b/arch/m68knommu/platform/coldfire/intc-2.c @@ -0,0 +1,93 @@ +/* + * intc-1.c + * + * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/traps.h> + +/* + * Each vector needs a unique priority and level asscoiated with it. + * We don't really care so much what they are, we don't rely on the + * tranditional priority interrupt scheme of the m68k/ColdFire. + */ +static u8 intc_intpri = 0x36; + +static void intc_irq_mask(unsigned int irq) +{ + if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 128)) { + unsigned long imraddr; + u32 val, imrbit; + + irq -= MCFINT_VECBASE; + imraddr = MCF_IPSBAR; + imraddr += (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0; + imraddr += (irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL; + imrbit = 0x1 << (irq & 0x1f); + + val = __raw_readl(imraddr); + __raw_writel(val | imrbit, imraddr); + } +} + +static void intc_irq_unmask(unsigned int irq) +{ + if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 128)) { + unsigned long intaddr, imraddr, icraddr; + u32 val, imrbit; + + irq -= MCFINT_VECBASE; + intaddr = MCF_IPSBAR; + intaddr += (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0; + imraddr = intaddr + ((irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL); + icraddr = intaddr + MCFINTC_ICR0 + (irq & 0x3f); + imrbit = 0x1 << (irq & 0x1f); + + /* Don't set the "maskall" bit! */ + if ((irq & 0x20) == 0) + imrbit |= 0x1; + + if (__raw_readb(icraddr) == 0) + __raw_writeb(intc_intpri--, icraddr); + + val = __raw_readl(imraddr); + __raw_writel(val & ~imrbit, imraddr); + } +} + +static struct irq_chip intc_irq_chip = { + .name = "CF-INTC", + .mask = intc_irq_mask, + .unmask = intc_irq_unmask, +}; + +void __init init_IRQ(void) +{ + int irq; + + init_vectors(); + + /* Mask all interrupt sources */ + __raw_writel(0x1, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL); + __raw_writel(0x1, MCF_IPSBAR + MCFICM_INTC1 + MCFINTC_IMRL); + + for (irq = 0; (irq < NR_IRQS); irq++) { + irq_desc[irq].status = IRQ_DISABLED; + irq_desc[irq].action = NULL; + irq_desc[irq].depth = 1; + irq_desc[irq].chip = &intc_irq_chip; + } +} + diff --git a/arch/m68knommu/platform/coldfire/intc-simr.c b/arch/m68knommu/platform/coldfire/intc-simr.c new file mode 100644 index 0000000..1b01e79 --- /dev/null +++ b/arch/m68knommu/platform/coldfire/intc-simr.c @@ -0,0 +1,78 @@ +/* + * intc-simr.c + * + * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/traps.h> + +static void intc_irq_mask(unsigned int irq) +{ + if (irq >= MCFINT_VECBASE) { + if (irq < MCFINT_VECBASE + 64) + __raw_writeb(irq - MCFINT_VECBASE, MCFINTC0_SIMR); + else if ((irq < MCFINT_VECBASE + 128) && MCFINTC1_SIMR) + __raw_writeb(irq - MCFINT_VECBASE - 64, MCFINTC1_SIMR); + } +} + +static void intc_irq_unmask(unsigned int irq) +{ + if (irq >= MCFINT_VECBASE) { + if (irq < MCFINT_VECBASE + 64) + __raw_writeb(irq - MCFINT_VECBASE, MCFINTC0_CIMR); + else if ((irq < MCFINT_VECBASE + 128) && MCFINTC1_CIMR) + __raw_writeb(irq - MCFINT_VECBASE - 64, MCFINTC1_CIMR); + } +} + +static int intc_irq_set_type(unsigned int irq, unsigned int type) +{ + if (irq >= MCFINT_VECBASE) { + if (irq < MCFINT_VECBASE + 64) + __raw_writeb(5, MCFINTC0_ICR0 + irq - MCFINT_VECBASE); + else if ((irq < MCFINT_VECBASE) && MCFINTC1_ICR0) + __raw_writeb(5, MCFINTC1_ICR0 + irq - MCFINT_VECBASE - 64); + } + return 0; +} + +static struct irq_chip intc_irq_chip = { + .name = "CF-INTC", + .mask = intc_irq_mask, + .unmask = intc_irq_unmask, + .set_type = intc_irq_set_type, +}; + +void __init init_IRQ(void) +{ + int irq; + + init_vectors(); + + /* Mask all interrupt sources */ + __raw_writeb(0xff, MCFINTC0_SIMR); + if (MCFINTC1_SIMR) + __raw_writeb(0xff, MCFINTC1_SIMR); + + for (irq = 0; (irq < NR_IRQS); irq++) { + irq_desc[irq].status = IRQ_DISABLED; + irq_desc[irq].action = NULL; + irq_desc[irq].depth = 1; + irq_desc[irq].chip = &intc_irq_chip; + intc_irq_set_type(irq, 0); + } +} + diff --git a/arch/m68knommu/platform/coldfire/intc.c b/arch/m68knommu/platform/coldfire/intc.c new file mode 100644 index 0000000..a4560c8 --- /dev/null +++ b/arch/m68knommu/platform/coldfire/intc.c @@ -0,0 +1,153 @@ +/* + * intc.c -- support for the old ColdFire interrupt controller + * + * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <asm/traps.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> + +/* + * The mapping of irq number to a mask register bit is not one-to-one. + * The irq numbers are either based on "level" of interrupt or fixed + * for an autovector-able interrupt. So we keep a local data structure + * that maps from irq to mask register. Not all interrupts will have + * an IMR bit. + */ +unsigned char mcf_irq2imr[NR_IRQS]; + +/* + * Define the miniumun and maximum external interrupt numbers. + * This is also used as the "level" interrupt numbers. + */ +#define EIRQ1 25 +#define EIRQ7 31 + +/* + * In the early version 2 core ColdFire parts the IMR register was 16 bits + * in size. Version 3 (and later version 2) core parts have a 32 bit + * sized IMR register. Provide some size independant methods to access the + * IMR register. + */ +#ifdef MCFSIM_IMR_IS_16BITS + +void mcf_setimr(int index) +{ + u16 imr; + imr = __raw_readw(MCF_MBAR + MCFSIM_IMR); + __raw_writew(imr | (0x1 << index), MCF_MBAR + MCFSIM_IMR); +} + +void mcf_clrimr(int index) +{ + u16 imr; + imr = __raw_readw(MCF_MBAR + MCFSIM_IMR); + __raw_writew(imr & ~(0x1 << index), MCF_MBAR + MCFSIM_IMR); +} + +void mcf_maskimr(unsigned int mask) +{ + u16 imr; + imr = __raw_readw(MCF_MBAR + MCFSIM_IMR); + imr |= mask; + __raw_writew(imr, MCF_MBAR + MCFSIM_IMR); +} + +#else + +void mcf_setimr(int index) +{ + u32 imr; + imr = __raw_readl(MCF_MBAR + MCFSIM_IMR); + __raw_writel(imr | (0x1 << index), MCF_MBAR + MCFSIM_IMR); +} + +void mcf_clrimr(int index) +{ + u32 imr; + imr = __raw_readl(MCF_MBAR + MCFSIM_IMR); + __raw_writel(imr & ~(0x1 << index), MCF_MBAR + MCFSIM_IMR); +} + +void mcf_maskimr(unsigned int mask) +{ + u32 imr; + imr = __raw_readl(MCF_MBAR + MCFSIM_IMR); + imr |= mask; + __raw_writel(imr, MCF_MBAR + MCFSIM_IMR); +} + +#endif + +/* + * Interrupts can be "vectored" on the ColdFire cores that support this old + * interrupt controller. That is, the device raising the interrupt can also + * supply the vector number to interrupt through. The AVR register of the + * interrupt controller enables or disables this for each external interrupt, + * so provide generic support for this. Setting this up is out-of-band for + * the interrupt system API's, and needs to be done by the driver that + * supports this device. Very few devices actually use this. + */ +void mcf_autovector(int irq) +{ +#ifdef MCFSIM_AVR + if ((irq >= EIRQ1) && (irq <= EIRQ7)) { + u8 avec; + avec = __raw_readb(MCF_MBAR + MCFSIM_AVR); + avec |= (0x1 << (irq - EIRQ1 + 1)); + __raw_writeb(avec, MCF_MBAR + MCFSIM_AVR); + } +#endif +} + +static void intc_irq_mask(unsigned int irq) +{ + if (mcf_irq2imr[irq]) + mcf_setimr(mcf_irq2imr[irq]); +} + +static void intc_irq_unmask(unsigned int irq) +{ + if (mcf_irq2imr[irq]) + mcf_clrimr(mcf_irq2imr[irq]); +} + +static int intc_irq_set_type(unsigned int irq, unsigned int type) +{ + return 0; +} + +static struct irq_chip intc_irq_chip = { + .name = "CF-INTC", + .mask = intc_irq_mask, + .unmask = intc_irq_unmask, + .set_type = intc_irq_set_type, +}; + +void __init init_IRQ(void) +{ + int irq; + + init_vectors(); + mcf_maskimr(0xffffffff); + + for (irq = 0; (irq < NR_IRQS); irq++) { + irq_desc[irq].status = IRQ_DISABLED; + irq_desc[irq].action = NULL; + irq_desc[irq].depth = 1; + irq_desc[irq].chip = &intc_irq_chip; + intc_irq_set_type(irq, 0); + } +} + diff --git a/arch/m68knommu/platform/coldfire/pinmux.c b/arch/m68knommu/platform/coldfire/pinmux.c new file mode 100644 index 0000000..8c62b82 --- /dev/null +++ b/arch/m68knommu/platform/coldfire/pinmux.c @@ -0,0 +1,28 @@ +/* + * Coldfire generic GPIO pinmux support. + * + * (C) Copyright 2009, Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> + +#include <asm/pinmux.h> + +int mcf_pinmux_request(unsigned pinmux, unsigned func) +{ + return 0; +} + +void mcf_pinmux_release(unsigned pinmux, unsigned func) +{ +} diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c index 61b9621..d8720ee 100644 --- a/arch/m68knommu/platform/coldfire/pit.c +++ b/arch/m68knommu/platform/coldfire/pit.c @@ -32,7 +32,6 @@ */ #define FREQ ((MCF_CLK / 2) / 64) #define TA(a) (MCF_IPSBAR + MCFPIT_BASE1 + (a)) -#define INTC0 (MCF_IPSBAR + MCFICM_INTC0) #define PIT_CYCLES_PER_JIFFY (FREQ / HZ) static u32 pit_cnt; @@ -154,8 +153,6 @@ static struct clocksource pit_clk = { void hw_timer_init(void) { - u32 imr; - cf_pit_clockevent.cpumask = cpumask_of(smp_processor_id()); cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32); cf_pit_clockevent.max_delta_ns = @@ -166,11 +163,6 @@ void hw_timer_init(void) setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq); - __raw_writeb(ICR_INTRCONF, INTC0 + MCFINTC_ICR0 + MCFINT_PIT1); - imr = __raw_readl(INTC0 + MCFPIT_IMR); - imr &= ~MCFPIT_IMR_IBIT; - __raw_writel(imr, INTC0 + MCFPIT_IMR); - pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift); clocksource_register(&pit_clk); } diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c index 1ba8a37..2304d73 100644 --- a/arch/m68knommu/platform/coldfire/timers.c +++ b/arch/m68knommu/platform/coldfire/timers.c @@ -31,19 +31,9 @@ #define TA(a) (MCF_MBAR + MCFTIMER_BASE1 + (a)) /* - * Default the timer and vector to use for ColdFire. Some ColdFire - * CPU's and some boards may want different. Their sub-architecture - * startup code (in config.c) can change these if they want. - */ -unsigned int mcf_timervector = 29; -unsigned int mcf_profilevector = 31; -unsigned int mcf_timerlevel = 5; - -/* * These provide the underlying interrupt vector support. * Unfortunately it is a little different on each ColdFire. */ -extern void mcf_settimericr(int timer, int level); void coldfire_profile_init(void); #if defined(CONFIG_M532x) @@ -107,8 +97,6 @@ static struct clocksource mcftmr_clk = { void hw_timer_init(void) { - setup_irq(mcf_timervector, &mcftmr_timer_irq); - __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR)); mcftmr_cycles_per_jiffy = FREQ / HZ; /* @@ -124,7 +112,7 @@ void hw_timer_init(void) mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift); clocksource_register(&mcftmr_clk); - mcf_settimericr(1, mcf_timerlevel); + setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq); #ifdef CONFIG_HIGHPROFILE coldfire_profile_init(); @@ -171,8 +159,6 @@ void coldfire_profile_init(void) printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n", PROFILEHZ); - setup_irq(mcf_profilevector, &coldfire_profile_irq); - /* Set up TIMER 2 as high speed profile clock */ __raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR)); @@ -180,7 +166,7 @@ void coldfire_profile_init(void) __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 | MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR)); - mcf_settimericr(2, 7); + setup_irq(MCF_IRQ_PROFILER, &coldfire_profile_irq); } /***************************************************************************/ diff --git a/arch/m68knommu/platform/coldfire/vectors.c b/arch/m68knommu/platform/coldfire/vectors.c index bdca029..a21d3f8 100644 --- a/arch/m68knommu/platform/coldfire/vectors.c +++ b/arch/m68knommu/platform/coldfire/vectors.c @@ -1,7 +1,7 @@ /***************************************************************************/ /* - * linux/arch/m68knommu/platform/5307/vectors.c + * linux/arch/m68knommu/platform/coldfire/vectors.c * * Copyright (C) 1999-2007, Greg Ungerer <gerg@snapgear.com> */ @@ -15,7 +15,6 @@ #include <asm/machdep.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> -#include <asm/mcfdma.h> #include <asm/mcfwdebug.h> /***************************************************************************/ @@ -79,20 +78,3 @@ void __init init_vectors(void) } /***************************************************************************/ - -void enable_vector(unsigned int irq) -{ - /* Currently no action on ColdFire */ -} - -void disable_vector(unsigned int irq) -{ - /* Currently no action on ColdFire */ -} - -void ack_vector(unsigned int irq) -{ - /* Currently no action on ColdFire */ -} - -/***************************************************************************/ diff --git a/drivers/net/fec.c b/drivers/net/fec.c index b472018..2923438 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -1154,19 +1154,9 @@ static void __inline__ fec_request_mii_intr(struct net_device *dev) printk("FEC: Could not allocate fec(MII) IRQ(66)!\n"); } -static void __inline__ fec_disable_phy_intr(void) +static void __inline__ fec_disable_phy_intr(struct net_device *dev) { - volatile unsigned long *icrp; - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = 0x08000000; -} - -static void __inline__ fec_phy_ack_intr(void) -{ - volatile unsigned long *icrp; - /* Acknowledge the interrupt */ - icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); - *icrp = 0x0d000000; + free_irq(66, dev); } #endif @@ -1398,7 +1388,7 @@ mii_discover_phy(uint mii_reg, struct net_device *dev) writel(0, fep->hwp + FEC_MII_SPEED); fep->phy_speed = 0; #ifdef HAVE_mii_link_interrupt - fec_disable_phy_intr(); + fec_disable_phy_intr(dev); #endif } } @@ -1411,8 +1401,6 @@ mii_link_interrupt(int irq, void * dev_id) struct net_device *dev = dev_id; struct fec_enet_private *fep = netdev_priv(dev); - fec_phy_ack_intr(); - mii_do_cmd(dev, fep->phy->ack_int); mii_do_cmd(dev, phy_cmd_relink); /* restart and display status */ |
