summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/i2c/ce4100-i2c.txt93
-rw-r--r--Documentation/devicetree/bindings/x86/ce4100.txt38
-rw-r--r--Documentation/devicetree/bindings/x86/interrupt.txt29
-rw-r--r--Documentation/devicetree/bindings/x86/timer.txt6
-rw-r--r--arch/x86/platform/ce4100/falconfalls.dts428
5 files changed, 594 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/i2c/ce4100-i2c.txt b/Documentation/devicetree/bindings/i2c/ce4100-i2c.txt
new file mode 100644
index 0000000..569b162
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/ce4100-i2c.txt
@@ -0,0 +1,93 @@
+CE4100 I2C
+----------
+
+CE4100 has one PCI device which is described as the I2C-Controller. This
+PCI device has three PCI-bars, each bar contains a complete I2C
+controller. So we have a total of three independent I2C-Controllers
+which share only an interrupt line.
+The driver is probed via the PCI-ID and is gathering the information of
+attached devices from the devices tree.
+Grant Likely recommended to use the ranges property to map the PCI-Bar
+number to its physical address and to use this to find the child nodes
+of the specific I2C controller. This were his exact words:
+
+ Here's where the magic happens. Each entry in
+ ranges describes how the parent pci address space
+ (middle group of 3) is translated to the local
+ address space (first group of 2) and the size of
+ each range (last cell). In this particular case,
+ the first cell of the local address is chosen to be
+ 1:1 mapped to the BARs, and the second is the
+ offset from be base of the BAR (which would be
+ non-zero if you had 2 or more devices mapped off
+ the same BAR)
+
+ ranges allows the address mapping to be described
+ in a way that the OS can interpret without
+ requiring custom device driver code.
+
+This is an example which is used on FalconFalls:
+------------------------------------------------
+ i2c-controller@b,2 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "pci8086,2e68.2",
+ "pci8086,2e68",
+ "pciclass,ff0000",
+ "pciclass,ff00";
+
+ reg = <0x15a00 0x0 0x0 0x0 0x0>;
+ interrupts = <16 1>;
+
+ /* as described by Grant, the first number in the group of
+ * three is the bar number followed by the 64bit bar address
+ * followed by size of the mapping. The bar address
+ * requires also a valid translation in parents ranges
+ * property.
+ */
+ ranges = <0 0 0x02000000 0 0xdffe0500 0x100
+ 1 0 0x02000000 0 0xdffe0600 0x100
+ 2 0 0x02000000 0 0xdffe0700 0x100>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ce4100-i2c-controller";
+
+ /* The first number in the reg property is the
+ * number of the bar
+ */
+ reg = <0 0 0x100>;
+
+ /* This I2C controller has no devices */
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ce4100-i2c-controller";
+ reg = <1 0 0x100>;
+
+ /* This I2C controller has one gpio controller */
+ gpio@26 {
+ #gpio-cells = <2>;
+ compatible = "ti,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ce4100-i2c-controller";
+ reg = <2 0 0x100>;
+
+ gpio@26 {
+ #gpio-cells = <2>;
+ compatible = "ti,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/x86/ce4100.txt b/Documentation/devicetree/bindings/x86/ce4100.txt
new file mode 100644
index 0000000..b49ae59
--- /dev/null
+++ b/Documentation/devicetree/bindings/x86/ce4100.txt
@@ -0,0 +1,38 @@
+CE4100 Device Tree Bindings
+---------------------------
+
+The CE4100 SoC uses for in core peripherals the following compatible
+format: <vendor>,<chip>-<device>.
+Many of the "generic" devices like HPET or IO APIC have the ce4100
+name in their compatible property because they first appeared in this
+SoC.
+
+The CPU node
+------------
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "intel,ce4100";
+ reg = <0>;
+ lapic = <&lapic0>;
+ };
+
+The reg property describes the CPU number. The lapic property points to
+the local APIC timer.
+
+The SoC node
+------------
+
+This node describes the in-core peripherals. Required property:
+ compatible = "intel,ce4100-cp";
+
+The PCI node
+------------
+This node describes the PCI bus on the SoC. Its property should be
+ compatible = "intel,ce4100-pci", "pci";
+
+If the OS is using the IO-APIC for interrupt routing then the reported
+interrupt numbers for devices is no longer true. In order to obtain the
+correct interrupt number, the child node which represents the device has
+to contain the interrupt property. Besides the interrupt property it has
+to contain at least the reg property containing the PCI bus address and
+compatible property according to "PCI Bus Binding Revision 2.1".
diff --git a/Documentation/devicetree/bindings/x86/interrupt.txt b/Documentation/devicetree/bindings/x86/interrupt.txt
new file mode 100644
index 0000000..8b0efb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/x86/interrupt.txt
@@ -0,0 +1,29 @@
+Interrupt chips
+---------------
+
+* Intel I/O Advanced Programmable Interrupt Controller (IO APIC)
+
+ Required properties:
+ --------------------
+ compatible = "intel,ce4100-ioapic";
+ #interrupt-cells = <2>;
+
+ Device's interrupt property:
+
+ interrupts = <P S>;
+
+ The first number (P) represents the interrupt pin which is wired to the
+ IO APIC. The second number (S) represents the sense of interrupt which
+ should be configured and can be one of:
+ 0 - Edge Rising
+ 1 - Level Low
+ 2 - Level High
+ 3 - Edge Falling
+
+* Local APIC
+ Required property:
+
+ compatible = "intel,ce4100-lapic";
+
+ This node is currently unused by Linux as the address of the local APIC
+ read from a MSR.
diff --git a/Documentation/devicetree/bindings/x86/timer.txt b/Documentation/devicetree/bindings/x86/timer.txt
new file mode 100644
index 0000000..c688af5
--- /dev/null
+++ b/Documentation/devicetree/bindings/x86/timer.txt
@@ -0,0 +1,6 @@
+Timers
+------
+
+* High Precision Event Timer (HPET)
+ Required property:
+ compatible = "intel,ce4100-hpet";
diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts
new file mode 100644
index 0000000..dc701ea
--- /dev/null
+++ b/arch/x86/platform/ce4100/falconfalls.dts
@@ -0,0 +1,428 @@
+/*
+ * CE4100 on Falcon Falls
+ *
+ * (c) Copyright 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ */
+/dts-v1/;
+/ {
+ model = "intel,falconfalls";
+ compatible = "intel,falconfalls";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "intel,ce4100";
+ reg = <0>;
+ lapic = <&lapic0>;
+ };
+ };
+
+ soc@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "intel,ce4100-cp";
+ ranges;
+
+ ioapic1: interrupt-controller@fec00000 {
+ #interrupt-cells = <2>;
+ compatible = "intel,ce4100-ioapic";
+ interrupt-controller;
+ reg = <0xfec00000 0x1000>;
+ };
+
+ timer@fed00000 {
+ compatible = "intel,ce4100-hpet";
+ reg = <0xfed00000 0x200>;
+ };
+
+ lapic0: interrupt-controller@fee00000 {
+ compatible = "intel,ce4100-lapic";
+ reg = <0xfee00000 0x1000>;
+ };
+
+ pci@3fc {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ compatible = "intel,ce4100-pci", "pci";
+ device_type = "pci";
+ bus-range = <0 0>;
+ ranges = <0x2000000 0 0xbffff000 0xbffff000 0 0x1000
+ 0x2000000 0 0xdffe0000 0xdffe0000 0 0x1000
+ 0x0000000 0 0x0 0x0 0 0x100>;
+
+ /* Secondary IO-APIC */
+ ioapic2: interrupt-controller@0,1 {
+ #interrupt-cells = <2>;
+ compatible = "intel,ce4100-ioapic";
+ interrupt-controller;
+ reg = <0x100 0x0 0x0 0x0 0x0>;
+ assigned-addresses = <0x02000000 0x0 0xbffff000 0x0 0x1000>;
+ };
+
+ pci@1,0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ compatible = "intel,ce4100-pci", "pci";
+ device_type = "pci";
+ bus-range = <1 1>;
+ ranges = <0x2000000 0 0xdffe0000 0x2000000 0 0xdffe0000 0 0x1000>;
+
+ interrupt-parent = <&ioapic2>;
+
+ display@2,0 {
+ compatible = "pci8086,2e5b.2",
+ "pci8086,2e5b",
+ "pciclass038000",
+ "pciclass0380";
+
+ reg = <0x11000 0x0 0x0 0x0 0x0>;
+ interrupts = <0 1>;
+ };
+
+ multimedia@3,0 {
+ compatible = "pci8086,2e5c.2",
+ "pci8086,2e5c",
+ "pciclass048000",
+ "pciclass0480";
+
+ reg = <0x11800 0x0 0x0 0x0 0x0>;
+ interrupts = <2 1>;
+ };
+
+ multimedia@4,0 {
+ compatible = "pci8086,2e5d.2",
+ "pci8086,2e5d",
+ "pciclass048000",
+ "pciclass0480";
+
+ reg = <0x12000 0x0 0x0 0x0 0x0>;
+ interrupts = <4 1>;
+ };
+
+ multimedia@4,1 {
+ compatible = "pci8086,2e5e.2",
+ "pci8086,2e5e",
+ "pciclass048000",
+ "pciclass0480";
+
+ reg = <0x12100 0x0 0x0 0x0 0x0>;
+ interrupts = <5 1>;
+ };
+
+ sound@6,0 {
+ compatible = "pci8086,2e5f.2",
+ "pci8086,2e5f",
+ "pciclass040100",
+ "pciclass0401";
+
+ reg = <0x13000 0x0 0x0 0x0 0x0>;
+ interrupts = <6 1>;
+ };
+
+ sound@6,1 {
+ compatible = "pci8086,2e5f.2",
+ "pci8086,2e5f",
+ "pciclass040100",
+ "pciclass0401";
+
+ reg = <0x13100 0x0 0x0 0x0 0x0>;
+ interrupts = <7 1>;
+ };
+
+ sound@6,2 {
+ compatible = "pci8086,2e60.2",
+ "pci8086,2e60",
+ "pciclass040100",
+ "pciclass0401";
+
+ reg = <0x13200 0x0 0x0 0x0 0x0>;
+ interrupts = <8 1>;
+ };
+
+ display@8,0 {
+ compatible = "pci8086,2e61.2",
+ "pci8086,2e61",
+ "pciclass038000",
+ "pciclass0380";
+
+ reg = <0x14000 0x0 0x0 0x0 0x0>;
+ interrupts = <9 1>;
+ };
+
+ display@8,1 {
+ compatible = "pci8086,2e62.2",
+ "pci8086,2e62",
+ "pciclass038000",
+ "pciclass0380";
+
+ reg = <0x14100 0x0 0x0 0x0 0x0>;
+ interrupts = <10 1>;
+ };
+
+ multimedia@8,2 {
+ compatible = "pci8086,2e63.2",
+ "pci8086,2e63",
+ "pciclass048000",
+ "pciclass0480";
+
+ reg = <0x14200 0x0 0x0 0x0 0x0>;
+ interrupts = <11 1>;
+ };
+
+ entertainment-encryption@9,0 {
+ compatible = "pci8086,2e64.2",
+ "pci8086,2e64",
+ "pciclass101000",
+ "pciclass1010";
+
+ reg = <0x14800 0x0 0x0 0x0 0x0>;
+ interrupts = <12 1>;
+ };
+
+ localbus@a,0 {
+ compatible = "pci8086,2e65.2",
+ "pci8086,2e65",
+ "pciclassff0000",
+ "pciclassff00";
+
+ reg = <0x15000 0x0 0x0 0x0 0x0>;
+ };
+
+ serial@b,0 {
+ compatible = "pci8086,2e66.2",
+ "pci8086,2e66",
+ "pciclass070003",
+ "pciclass0700";
+
+ reg = <0x15800 0x0 0x0 0x0 0x0>;
+ interrupts = <14 1>;
+ };
+
+ gpio@b,1 {
+ compatible = "pci8086,2e67.2",
+ "pci8086,2e67",
+ "pciclassff0000",
+ "pciclassff00";
+
+ #gpio-cells = <2>;
+ reg = <0x15900 0x0 0x0 0x0 0x0>;
+ interrupts = <15 1>;
+ gpio-controller;
+ };
+
+ i2c-controller@b,2 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "pci8086,2e68.2",
+ "pci8086,2e68",
+ "pciclass,ff0000",
+ "pciclass,ff00";
+
+ reg = <0x15a00 0x0 0x0 0x0 0x0>;
+ interrupts = <16 1>;
+ ranges = <0 0 0x02000000 0 0xdffe0500 0x100
+ 1 0 0x02000000 0 0xdffe0600 0x100
+ 2 0 0x02000000 0 0xdffe0700 0x100>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ce4100-i2c-controller";
+ reg = <0 0 0x100>;
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ce4100-i2c-controller";
+ reg = <1 0 0x100>;
+
+ gpio@26 {
+ #gpio-cells = <2>;
+ compatible = "ti,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ce4100-i2c-controller";
+ reg = <2 0 0x100>;
+
+ gpio@26 {
+ #gpio-cells = <2>;
+ compatible = "ti,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ };
+ };
+ };
+
+ smard-card@b,3 {
+ compatible = "pci8086,2e69.2",
+ "pci8086,2e69",
+ "pciclass070500",
+ "pciclass0705";
+
+ reg = <0x15b00 0x0 0x0 0x0 0x0>;
+ interrupts = <15 1>;
+ };
+
+ spi-controller@b,4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible =
+ "pci8086,2e6a.2",
+ "pci8086,2e6a",
+ "pciclass,ff0000",
+ "pciclass,ff00";
+
+ reg = <0x15c00 0x0 0x0 0x0 0x0>;
+ interrupts = <15 1>;
+
+ dac@0 {
+ compatible = "ti,pcm1755";
+ reg = <0>;
+ spi-max-frequency = <115200>;
+ };
+
+ dac@1 {
+ compatible = "ti,pcm1609a";
+ reg = <1>;
+ spi-max-frequency = <115200>;
+ };
+
+ eeprom@2 {
+ compatible = "atmel,at93c46";
+ reg = <2>;
+ spi-max-frequency = <115200>;
+ };
+ };
+
+ multimedia@b,7 {
+ compatible = "pci8086,2e6d.2",
+ "pci8086,2e6d",
+ "pciclassff0000",
+ "pciclassff00";
+
+ reg = <0x15f00 0x0 0x0 0x0 0x0>;
+ };
+
+ ethernet@c,0 {
+ compatible = "pci8086,2e6e.2",
+ "pci8086,2e6e",
+ "pciclass020000",
+ "pciclass0200";
+
+ reg = <0x16000 0x0 0x0 0x0 0x0>;
+ interrupts = <21 1>;
+ };
+
+ clock@c,1 {
+ compatible = "pci8086,2e6f.2",
+ "pci8086,2e6f",
+ "pciclassff0000",
+ "pciclassff00";
+
+ reg = <0x16100 0x0 0x0 0x0 0x0>;
+ interrupts = <3 1>;
+ };
+
+ usb@d,0 {
+ compatible = "pci8086,2e70.2",
+ "pci8086,2e70",
+ "pciclass0c0320",
+ "pciclass0c03";
+
+ reg = <0x16800 0x0 0x0 0x0 0x0>;
+ interrupts = <22 3>;
+ };
+
+ usb@d,1 {
+ compatible = "pci8086,2e70.2",
+ "pci8086,2e70",
+ "pciclass0c0320",
+ "pciclass0c03";
+
+ reg = <0x16900 0x0 0x0 0x0 0x0>;
+ interrupts = <22 3>;
+ };
+
+ sata@e,0 {
+ compatible = "pci8086,2e71.0",
+ "pci8086,2e71",
+ "pciclass010601",
+ "pciclass0106";
+
+ reg = <0x17000 0x0 0x0 0x0 0x0>;
+ interrupts = <23 3>;
+ };
+
+ flash@f,0 {
+ compatible = "pci8086,701.1",
+ "pci8086,701",
+ "pciclass050100",
+ "pciclass0501";
+
+ reg = <0x17800 0x0 0x0 0x0 0x0>;
+ interrupts = <13 1>;
+ };
+
+ entertainment-encryption@10,0 {
+ compatible = "pci8086,702.1",
+ "pci8086,702",
+ "pciclass101000",
+ "pciclass1010";
+
+ reg = <0x18000 0x0 0x0 0x0 0x0>;
+ };
+
+ co-processor@11,0 {
+ compatible = "pci8086,703.1",
+ "pci8086,703",
+ "pciclass0b4000",
+ "pciclass0b40";
+
+ reg = <0x18800 0x0 0x0 0x0 0x0>;
+ interrupts = <1 1>;
+ };
+
+ multimedia@12,0 {
+ compatible = "pci8086,704.0",
+ "pci8086,704",
+ "pciclass048000",
+ "pciclass0480";
+
+ reg = <0x19000 0x0 0x0 0x0 0x0>;
+ };
+ };
+
+ isa@1f,0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "isa";
+ ranges = <1 0 0 0 0 0x100>;
+
+ rtc@70 {
+ compatible = "intel,ce4100-rtc", "motorola,mc146818";
+ interrupts = <8 3>;
+ interrupt-parent = <&ioapic1>;
+ ctrl-reg = <2>;
+ freq-reg = <0x26>;
+ reg = <1 0x70 2>;
+ };
+ };
+ };
+ };
+};
OpenPOWER on IntegriCloud