summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/lm8711
-rw-r--r--drivers/hwmon/Kconfig4
-rw-r--r--drivers/hwmon/lm87.c25
3 files changed, 29 insertions, 11 deletions
diff --git a/Documentation/hwmon/lm87 b/Documentation/hwmon/lm87
index c952c57..ec27aa1 100644
--- a/Documentation/hwmon/lm87
+++ b/Documentation/hwmon/lm87
@@ -4,8 +4,12 @@ Kernel driver lm87
Supported chips:
* National Semiconductor LM87
Prefix: 'lm87'
- Addresses scanned: I2C 0x2c - 0x2f
+ Addresses scanned: I2C 0x2c - 0x2e
Datasheet: http://www.national.com/pf/LM/LM87.html
+ * Analog Devices ADM1024
+ Prefix: 'adm1024'
+ Addresses scanned: I2C 0x2c - 0x2e
+ Datasheet: http://www.analog.com/en/prod/0,2877,ADM1024,00.html
Authors:
Frodo Looijaard <frodol@dds.nl>,
@@ -19,11 +23,12 @@ Authors:
Description
-----------
-This driver implements support for the National Semiconductor LM87.
+This driver implements support for the National Semiconductor LM87
+and the Analog Devices ADM1024.
The LM87 implements up to three temperature sensors, up to two fan
rotation speed sensors, up to seven voltage sensors, alarms, and some
-miscellaneous stuff.
+miscellaneous stuff. The ADM1024 is fully compatible.
Temperatures are measured in degrees Celsius. Each input has a high
and low alarm settings. A high limit produces an alarm when the value
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index a2187df5..af43d56 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -433,12 +433,12 @@ config SENSORS_LM85
will be called lm85.
config SENSORS_LM87
- tristate "National Semiconductor LM87"
+ tristate "National Semiconductor LM87 and compatibles"
depends on I2C
select HWMON_VID
help
If you say yes here you get support for National Semiconductor LM87
- sensor chips.
+ and Analog Devices ADM1024 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm87.
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index 28cdff0..3ab4c3f 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -5,7 +5,7 @@
* Philip Edelbrock <phil@netroedge.com>
* Stephen Rousset <stephen.rousset@rocketlogix.com>
* Dan Eaton <dan.eaton@rocketlogix.com>
- * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2004,2007 Jean Delvare <khali@linux-fr.org>
*
* Original port to Linux 2.6 by Jeff Oliver.
*
@@ -37,6 +37,11 @@
* instead. The LM87 is the only hardware monitoring chipset I know of
* which uses amplitude modulation. Be careful when using this feature.
*
+ * This driver also supports the ADM1024, a sensor chip made by Analog
+ * Devices. That chip is fully compatible with the LM87. Complete
+ * datasheet can be obtained from Analog's website at:
+ * http://www.analog.com/en/prod/0,2877,ADM1024,00.html
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -74,7 +79,7 @@ static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
* Insmod parameters
*/
-I2C_CLIENT_INSMOD_1(lm87);
+I2C_CLIENT_INSMOD_2(lm87, adm1024);
/*
* The LM87 registers
@@ -662,6 +667,7 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind)
struct i2c_client *new_client;
struct lm87_data *data;
int err = 0;
+ static const char *names[] = { "lm87", "adm1024" };
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
@@ -686,11 +692,18 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind)
/* Now, we do the remaining detection. */
if (kind < 0) {
+ u8 cid = lm87_read_value(new_client, LM87_REG_COMPANY_ID);
u8 rev = lm87_read_value(new_client, LM87_REG_REVISION);
- if (rev < 0x01 || rev > 0x08
- || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)
- || lm87_read_value(new_client, LM87_REG_COMPANY_ID) != 0x02) {
+ if (cid == 0x02 /* National Semiconductor */
+ && (rev >= 0x01 && rev <= 0x08))
+ kind = lm87;
+ else if (cid == 0x41 /* Analog Devices */
+ && (rev & 0xf0) == 0x10)
+ kind = adm1024;
+
+ if (kind < 0
+ || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)) {
dev_dbg(&adapter->dev,
"LM87 detection failed at 0x%02x.\n",
address);
@@ -699,7 +712,7 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind)
}
/* We can fill in the remaining client fields */
- strlcpy(new_client->name, "lm87", I2C_NAME_SIZE);
+ strlcpy(new_client->name, names[kind - 1], I2C_NAME_SIZE);
data->valid = 0;
mutex_init(&data->update_lock);
OpenPOWER on IntegriCloud