diff options
| -rw-r--r-- | drivers/serial/sunzilog.c | 71 |
1 files changed, 35 insertions, 36 deletions
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 18df10f..47bc3d5 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -68,9 +68,6 @@ static int num_sunzilog; #define NUM_SUNZILOG num_sunzilog #define NUM_CHANNELS (NUM_SUNZILOG * 2) -#define KEYBOARD_LINE 0x2 -#define MOUSE_LINE 0x3 - #define ZS_CLOCK 4915200 /* Zilog input clock rate. */ #define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */ @@ -1225,12 +1222,10 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe { int baud, brg; - if (channel == KEYBOARD_LINE) { - up->flags |= SUNZILOG_FLAG_CONS_KEYB; + if (up->flags & SUNZILOG_FLAG_CONS_KEYB) { up->cflag = B1200 | CS8 | CLOCAL | CREAD; baud = 1200; } else { - up->flags |= SUNZILOG_FLAG_CONS_MOUSE; up->cflag = B4800 | CS8 | CLOCAL | CREAD; baud = 4800; } @@ -1243,14 +1238,14 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe } #ifdef CONFIG_SERIO -static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int channel) +static void __init sunzilog_register_serio(struct uart_sunzilog_port *up) { struct serio *serio = &up->serio; serio->port_data = up; serio->id.type = SERIO_RS232; - if (channel == KEYBOARD_LINE) { + if (up->flags & SUNZILOG_FLAG_CONS_KEYB) { serio->id.proto = SERIO_SUNKBD; strlcpy(serio->name, "zskbd", sizeof(serio->name)); } else { @@ -1259,7 +1254,8 @@ static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int ch strlcpy(serio->name, "zsms", sizeof(serio->name)); } strlcpy(serio->phys, - (channel == KEYBOARD_LINE ? "zs/serio0" : "zs/serio1"), + ((up->flags & SUNZILOG_FLAG_CONS_KEYB) ? + "zs/serio0" : "zs/serio1"), sizeof(serio->phys)); serio->write = sunzilog_serio_write; @@ -1286,8 +1282,8 @@ static void __init sunzilog_init_hw(struct uart_sunzilog_port *up) (void) read_zsreg(channel, R0); } - if (up->port.line == KEYBOARD_LINE || - up->port.line == MOUSE_LINE) { + if (up->flags & (SUNZILOG_FLAG_CONS_KEYB | + SUNZILOG_FLAG_CONS_MOUSE)) { sunzilog_init_kbdms(up, up->port.line); up->curregs[R9] |= (NV | MIE); write_zsreg(channel, R9, up->curregs[R9]); @@ -1313,36 +1309,26 @@ static void __init sunzilog_init_hw(struct uart_sunzilog_port *up) spin_unlock_irqrestore(&up->port.lock, flags); #ifdef CONFIG_SERIO - if (up->port.line == KEYBOARD_LINE || up->port.line == MOUSE_LINE) - sunzilog_register_serio(up, up->port.line); + if (up->flags & (SUNZILOG_FLAG_CONS_KEYB | + SUNZILOG_FLAG_CONS_MOUSE)) + sunzilog_register_serio(up); #endif } -static int __devinit zs_get_instance(struct device_node *dp) -{ - int ret; - - ret = of_getintprop_default(dp, "slave", -1); - if (ret != -1) - return ret; - - if (of_find_property(dp, "keyboard", NULL)) - ret = 1; - else - ret = 0; - - return ret; -} - static int zilog_irq = -1; static int __devinit zs_probe(struct of_device *op, const struct of_device_id *match) { + static int inst; struct uart_sunzilog_port *up; struct zilog_layout __iomem *rp; - int inst = zs_get_instance(op->node); + int keyboard_mouse; int err; + keyboard_mouse = 0; + if (of_find_property(op->node, "keyboard", NULL)) + keyboard_mouse = 1; + sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0, sizeof(struct zilog_layout), "zs"); @@ -1369,7 +1355,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m up[0].port.line = (inst * 2) + 0; up[0].port.dev = &op->dev; up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A; - if (inst == 1) + if (keyboard_mouse) up[0].flags |= SUNZILOG_FLAG_CONS_KEYB; sunzilog_init_hw(&up[0]); @@ -1386,11 +1372,11 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m up[1].port.line = (inst * 2) + 1; up[1].port.dev = &op->dev; up[1].flags |= 0; - if (inst == 1) + if (keyboard_mouse) up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE; sunzilog_init_hw(&up[1]); - if (inst != 1) { + if (!keyboard_mouse) { err = uart_add_one_port(&sunzilog_reg, &up[0].port); if (err) { of_iounmap(rp, sizeof(struct zilog_layout)); @@ -1402,10 +1388,19 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m of_iounmap(rp, sizeof(struct zilog_layout)); return err; } + } else { + printk(KERN_INFO "%s: Keyboard at MMIO %lx (irq = %d) " + "is a zs\n", + op->dev.bus_id, up[0].port.mapbase, op->irqs[0]); + printk(KERN_INFO "%s: Mouse at MMIO %lx (irq = %d) " + "is a zs\n", + op->dev.bus_id, up[1].port.mapbase, op->irqs[0]); } dev_set_drvdata(&op->dev, &up[0]); + inst++; + return 0; } @@ -1454,10 +1449,15 @@ static int __init sunzilog_init(void) { struct device_node *dp; int err, uart_count; + int num_keybms; NUM_SUNZILOG = 0; - for_each_node_by_name(dp, "zs") + num_keybms = 0; + for_each_node_by_name(dp, "zs") { NUM_SUNZILOG++; + if (of_find_property(dp, "keyboard", NULL)) + num_keybms++; + } uart_count = 0; if (NUM_SUNZILOG) { @@ -1467,8 +1467,7 @@ static int __init sunzilog_init(void) if (err) goto out; - /* Subtract 1 for keyboard, 1 for mouse. */ - uart_count = (NUM_SUNZILOG * 2) - 2; + uart_count = (NUM_SUNZILOG * 2) - (2 * num_keybms); sunzilog_reg.nr = uart_count; sunzilog_reg.minor = sunserial_current_minor; |
