diff options
| -rw-r--r-- | Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 22 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/spi/spi_nvidia.txt | 5 | ||||
| -rw-r--r-- | Documentation/spi/ep93xx_spi | 10 | ||||
| -rw-r--r-- | Documentation/spi/pxa2xx | 5 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/Makefile | 4 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/core.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/dma-m2p.c | 411 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/dma.c | 108 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/include/mach/dma.h | 190 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-imx/clock-imx25.c | 7 | ||||
| -rw-r--r-- | arch/arm/mach-mx5/clock-mx51-mx53.c | 11 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/include/mach/spi-gpio.h | 28 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/mach-qt2410.c | 34 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2412/mach-jive.c | 41 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2440/mach-gta02.c | 1 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/devices/platform-spi_imx.c | 12 | ||||
| -rw-r--r-- | drivers/dma/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/dma/Makefile | 1 | ||||
| -rw-r--r-- | drivers/dma/ep93xx_dma.c | 1355 | ||||
| -rw-r--r-- | drivers/spi/Kconfig | 48 | ||||
| -rw-r--r-- | drivers/spi/Makefile | 111 | ||||
| -rw-r--r-- | drivers/spi/atmel_spi.h | 167 | ||||
| -rw-r--r-- | drivers/spi/spi-altera.c (renamed from drivers/spi/spi_altera.c) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-ath79.c (renamed from drivers/spi/ath79_spi.c) | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-atmel.c (renamed from drivers/spi/atmel_spi.c) | 155 | ||||
| -rw-r--r-- | drivers/spi/spi-au1550.c (renamed from drivers/spi/au1550_spi.c) | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-bfin-sport.c (renamed from drivers/spi/spi_bfin_sport.c) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-bfin5xx.c (renamed from drivers/spi/spi_bfin5xx.c) | 218 | ||||
| -rw-r--r-- | drivers/spi/spi-bitbang-txrx.h (renamed from drivers/spi/spi_bitbang_txrx.h) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-bitbang.c (renamed from drivers/spi/spi_bitbang.c) | 8 | ||||
| -rw-r--r-- | drivers/spi/spi-butterfly.c (renamed from drivers/spi/spi_butterfly.c) | 4 | ||||
| -rw-r--r-- | drivers/spi/spi-coldfire-qspi.c (renamed from drivers/spi/coldfire_qspi.c) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-davinci.c (renamed from drivers/spi/davinci_spi.c) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-dw-mid.c (renamed from drivers/spi/dw_spi_mid.c) | 4 | ||||
| -rw-r--r-- | drivers/spi/spi-dw-mmio.c (renamed from drivers/spi/dw_spi_mmio.c) | 4 | ||||
| -rw-r--r-- | drivers/spi/spi-dw-pci.c (renamed from drivers/spi/dw_spi_pci.c) | 4 | ||||
| -rw-r--r-- | drivers/spi/spi-dw.c (renamed from drivers/spi/dw_spi.c) | 8 | ||||
| -rw-r--r-- | drivers/spi/spi-dw.h (renamed from drivers/spi/dw_spi.h) | 1 | ||||
| -rw-r--r-- | drivers/spi/spi-ep93xx.c (renamed from drivers/spi/ep93xx_spi.c) | 303 | ||||
| -rw-r--r-- | drivers/spi/spi-fsl-espi.c (renamed from drivers/spi/spi_fsl_espi.c) | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-fsl-lib.c (renamed from drivers/spi/spi_fsl_lib.c) | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-fsl-lib.h (renamed from drivers/spi/spi_fsl_lib.h) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-fsl-spi.c (renamed from drivers/spi/spi_fsl_spi.c) | 30 | ||||
| -rw-r--r-- | drivers/spi/spi-gpio.c (renamed from drivers/spi/spi_gpio.c) | 6 | ||||
| -rw-r--r-- | drivers/spi/spi-imx.c (renamed from drivers/spi/spi_imx.c) | 466 | ||||
| -rw-r--r-- | drivers/spi/spi-lm70llp.c (renamed from drivers/spi/spi_lm70llp.c) | 4 | ||||
| -rw-r--r-- | drivers/spi/spi-mpc512x-psc.c (renamed from drivers/spi/mpc512x_psc_spi.c) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-mpc52xx-psc.c (renamed from drivers/spi/mpc52xx_psc_spi.c) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-mpc52xx.c (renamed from drivers/spi/mpc52xx_spi.c) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-nuc900.c (renamed from drivers/spi/spi_nuc900.c) | 5 | ||||
| -rw-r--r-- | drivers/spi/spi-oc-tiny.c (renamed from drivers/spi/spi_oc_tiny.c) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-omap-100k.c (renamed from drivers/spi/omap_spi_100k.c) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-omap-uwire.c (renamed from drivers/spi/omap_uwire.c) | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-omap2-mcspi.c (renamed from drivers/spi/omap2_mcspi.c) | 10 | ||||
| -rw-r--r-- | drivers/spi/spi-orion.c (renamed from drivers/spi/orion_spi.c) | 8 | ||||
| -rw-r--r-- | drivers/spi/spi-pl022.c (renamed from drivers/spi/amba-pl022.c) | 111 | ||||
| -rw-r--r-- | drivers/spi/spi-ppc4xx.c (renamed from drivers/spi/spi_ppc4xx.c) | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-pxa2xx-pci.c (renamed from drivers/spi/pxa2xx_spi_pci.c) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-pxa2xx.c (renamed from drivers/spi/pxa2xx_spi.c) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-s3c24xx-fiq.S (renamed from drivers/spi/spi_s3c24xx_fiq.S) | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-s3c24xx-fiq.h (renamed from drivers/spi/spi_s3c24xx_fiq.h) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-s3c24xx.c (renamed from drivers/spi/spi_s3c24xx.c) | 5 | ||||
| -rw-r--r-- | drivers/spi/spi-s3c64xx.c (renamed from drivers/spi/spi_s3c64xx.c) | 3 | ||||
| -rw-r--r-- | drivers/spi/spi-sh-msiof.c (renamed from drivers/spi/spi_sh_msiof.c) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-sh-sci.c (renamed from drivers/spi/spi_sh_sci.c) | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-sh.c (renamed from drivers/spi/spi_sh.c) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-stmp.c (renamed from drivers/spi/spi_stmp.c) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-tegra.c (renamed from drivers/spi/spi_tegra.c) | 20 | ||||
| -rw-r--r-- | drivers/spi/spi-ti-ssp.c (renamed from drivers/spi/ti-ssp-spi.c) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi-tle62x0.c (renamed from drivers/spi/tle62x0.c) | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-topcliff-pch.c (renamed from drivers/spi/spi_topcliff_pch.c) | 1158 | ||||
| -rw-r--r-- | drivers/spi/spi-txx9.c (renamed from drivers/spi/spi_txx9.c) | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-xilinx.c (renamed from drivers/spi/xilinx_spi.c) | 0 | ||||
| -rw-r--r-- | drivers/spi/spi.c | 2 | ||||
| -rw-r--r-- | drivers/spi/spi_s3c24xx_gpio.c | 201 | ||||
| -rw-r--r-- | drivers/spi/spidev.c | 2 | ||||
| -rw-r--r-- | sound/soc/ep93xx/ep93xx-ac97.c | 4 | ||||
| -rw-r--r-- | sound/soc/ep93xx/ep93xx-i2s.c | 4 | ||||
| -rw-r--r-- | sound/soc/ep93xx/ep93xx-pcm.c | 137 |
80 files changed, 3494 insertions, 1997 deletions
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt new file mode 100644 index 0000000..9841057 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt @@ -0,0 +1,22 @@ +* Freescale (Enhanced) Configurable Serial Peripheral Interface + (CSPI/eCSPI) for i.MX + +Required properties: +- compatible : Should be "fsl,<soc>-cspi" or "fsl,<soc>-ecspi" +- reg : Offset and length of the register set for the device +- interrupts : Should contain CSPI/eCSPI interrupt +- fsl,spi-num-chipselects : Contains the number of the chipselect +- cs-gpios : Specifies the gpio pins to be used for chipselects. + +Example: + +ecspi@70010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx51-ecspi"; + reg = <0x70010000 0x4000>; + interrupts = <36>; + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */ + <&gpio3 25 0>; /* GPIO4_25 */ +}; diff --git a/Documentation/devicetree/bindings/spi/spi_nvidia.txt b/Documentation/devicetree/bindings/spi/spi_nvidia.txt new file mode 100644 index 0000000..6b9e518 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi_nvidia.txt @@ -0,0 +1,5 @@ +NVIDIA Tegra 2 SPI device + +Required properties: +- compatible : should be "nvidia,tegra20-spi". +- gpios : should specify GPIOs used for chipselect. diff --git a/Documentation/spi/ep93xx_spi b/Documentation/spi/ep93xx_spi index 6325f5b..d8eb01c 100644 --- a/Documentation/spi/ep93xx_spi +++ b/Documentation/spi/ep93xx_spi @@ -88,6 +88,16 @@ static void __init ts72xx_init_machine(void) ARRAY_SIZE(ts72xx_spi_devices)); } +The driver can use DMA for the transfers also. In this case ts72xx_spi_info +becomes: + +static struct ep93xx_spi_info ts72xx_spi_info = { + .num_chipselect = ARRAY_SIZE(ts72xx_spi_devices), + .use_dma = true; +}; + +Note that CONFIG_EP93XX_DMA should be enabled as well. + Thanks to ========= Martin Guy, H. Hartley Sweeten and others who helped me during development of diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx index 493dada..00511e0 100644 --- a/Documentation/spi/pxa2xx +++ b/Documentation/spi/pxa2xx @@ -22,15 +22,11 @@ Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a found in include/linux/spi/pxa2xx_spi.h: struct pxa2xx_spi_master { - enum pxa_ssp_type ssp_type; u32 clock_enable; u16 num_chipselect; u8 enable_dma; }; -The "pxa2xx_spi_master.ssp_type" field must have a value between 1 and 3 and -informs the driver which features a particular SSP supports. - The "pxa2xx_spi_master.clock_enable" field is used to enable/disable the corresponding SSP peripheral block in the "Clock Enable Register (CKEN"). See the "PXA2xx Developer Manual" section "Clocks and Power Management". @@ -61,7 +57,6 @@ static struct resource pxa_spi_nssp_resources[] = { }; static struct pxa2xx_spi_master pxa_nssp_master_info = { - .ssp_type = PXA25x_NSSP, /* Type of SSP */ .clock_enable = CKEN_NSSP, /* NSSP Peripheral clock */ .num_chipselect = 1, /* Matches the number of chips attached to NSSP */ .enable_dma = 1, /* Enables NSSP DMA */ diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 6b7c41d..3cedcf2 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -1,11 +1,13 @@ # # Makefile for the linux kernel. # -obj-y := core.o clock.o dma-m2p.o +obj-y := core.o clock.o obj-m := obj-n := obj- := +obj-$(CONFIG_EP93XX_DMA) += dma.o + obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index c488e4b..c60f081 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -506,11 +506,15 @@ static struct resource ep93xx_spi_resources[] = { }, }; +static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32); + static struct platform_device ep93xx_spi_device = { .name = "ep93xx-spi", .id = 0, .dev = { - .platform_data = &ep93xx_spi_master_data, + .platform_data = &ep93xx_spi_master_data, + .coherent_dma_mask = DMA_BIT_MASK(32), + .dma_mask = &ep93xx_spi_dma_mask, }, .num_resources = ARRAY_SIZE(ep93xx_spi_resources), .resource = ep93xx_spi_resources, diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c deleted file mode 100644 index a696d35..0000000 --- a/arch/arm/mach-ep93xx/dma-m2p.c +++ /dev/null @@ -1,411 +0,0 @@ -/* - * arch/arm/mach-ep93xx/dma-m2p.c - * M2P DMA handling for Cirrus EP93xx chips. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * Copyright (C) 2006 Applied Data Systems - * - * Copyright (C) 2009 Ryan Mallon <ryan@bluewatersys.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -/* - * On the EP93xx chip the following peripherals my be allocated to the 10 - * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive). - * - * I2S contains 3 Tx and 3 Rx DMA Channels - * AAC contains 3 Tx and 3 Rx DMA Channels - * UART1 contains 1 Tx and 1 Rx DMA Channels - * UART2 contains 1 Tx and 1 Rx DMA Channels - * UART3 contains 1 Tx and 1 Rx DMA Channels - * IrDA contains 1 Tx and 1 Rx DMA Channels - * - * SSP and IDE use the Memory to Memory (M2M) channels and are not covered - * with this implementation. - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/io.h> - -#include <mach/dma.h> -#include <mach/hardware.h> - -#define M2P_CONTROL 0x00 -#define M2P_CONTROL_STALL_IRQ_EN (1 << 0) -#define M2P_CONTROL_NFB_IRQ_EN (1 << 1) -#define M2P_CONTROL_ERROR_IRQ_EN (1 << 3) -#define M2P_CONTROL_ENABLE (1 << 4) -#define M2P_INTERRUPT 0x04 -#define M2P_INTERRUPT_STALL (1 << 0) -#define M2P_INTERRUPT_NFB (1 << 1) -#define M2P_INTERRUPT_ERROR (1 << 3) -#define M2P_PPALLOC 0x08 -#define M2P_STATUS 0x0c -#define M2P_REMAIN 0x14 -#define M2P_MAXCNT0 0x20 -#define M2P_BASE0 0x24 -#define M2P_MAXCNT1 0x30 -#define M2P_BASE1 0x34 - -#define STATE_IDLE 0 /* Channel is inactive. */ -#define STATE_STALL 1 /* Channel is active, no buffers pending. */ -#define STATE_ON 2 /* Channel is active, one buffer pending. */ -#define STATE_NEXT 3 /* Channel is active, two buffers pending. */ - -struct m2p_channel { - char *name; - void __iomem *base; - int irq; - - struct clk *clk; - spinlock_t lock; - - void *client; - unsigned next_slot:1; - struct ep93xx_dma_buffer *buffer_xfer; - struct ep93xx_dma_buffer *buffer_next; - struct list_head buffers_pending; -}; - -static struct m2p_channel m2p_rx[] = { - {"m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1}, - {"m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3}, - {"m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5}, - {"m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7}, - {"m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9}, - {NULL}, -}; - -static struct m2p_channel m2p_tx[] = { - {"m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0}, - {"m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2}, - {"m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4}, - {"m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6}, - {"m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8}, - {NULL}, -}; - -static void feed_buf(struct m2p_channel *ch, struct ep93xx_dma_buffer *buf) -{ - if (ch->next_slot == 0) { - writel(buf->size, ch->base + M2P_MAXCNT0); - writel(buf->bus_addr, ch->base + M2P_BASE0); - } else { - writel(buf->size, ch->base + M2P_MAXCNT1); - writel(buf->bus_addr, ch->base + M2P_BASE1); - } - ch->next_slot ^= 1; -} - -static void choose_buffer_xfer(struct m2p_channel *ch) -{ - struct ep93xx_dma_buffer *buf; - - ch->buffer_xfer = NULL; - if (!list_empty(&ch->buffers_pending)) { - buf = list_entry(ch->buffers_pending.next, - struct ep93xx_dma_buffer, list); - list_del(&buf->list); - feed_buf(ch, buf); - ch->buffer_xfer = buf; - } -} - -static void choose_buffer_next(struct m2p_channel *ch) -{ - struct ep93xx_dma_buffer *buf; - - ch->buffer_next = NULL; - if (!list_empty(&ch->buffers_pending)) { - buf = list_entry(ch->buffers_pending.next, - struct ep93xx_dma_buffer, list); - list_del(&buf->list); - feed_buf(ch, buf); - ch->buffer_next = buf; - } -} - -static inline void m2p_set_control(struct m2p_channel *ch, u32 v) -{ - /* - * The control register must be read immediately after being written so - * that the internal state machine is correctly updated. See the ep93xx - * users' guide for details. - */ - writel(v, ch->base + M2P_CONTROL); - readl(ch->base + M2P_CONTROL); -} - -static inline int m2p_channel_state(struct m2p_channel *ch) -{ - return (readl(ch->base + M2P_STATUS) >> 4) & 0x3; -} - -static irqreturn_t m2p_irq(int irq, void *dev_id) -{ - struct m2p_channel *ch = dev_id; - struct ep93xx_dma_m2p_client *cl; - u32 irq_status, v; - int error = 0; - - cl = ch->client; - - spin_lock(&ch->lock); - irq_status = readl(ch->base + M2P_INTERRUPT); - - if (irq_status & M2P_INTERRUPT_ERROR) { - writel(M2P_INTERRUPT_ERROR, ch->base + M2P_INTERRUPT); - error = 1; - } - - if ((irq_status & (M2P_INTERRUPT_STALL | M2P_INTERRUPT_NFB)) == 0) { - spin_unlock(&ch->lock); - return IRQ_NONE; - } - - switch (m2p_channel_state(ch)) { - case STATE_IDLE: - pr_crit("dma interrupt without a dma buffer\n"); - BUG(); - break; - - case STATE_STALL: - cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error); - if (ch->buffer_next != NULL) { - cl->buffer_finished(cl->cookie, ch->buffer_next, - 0, error); - } - choose_buffer_xfer(ch); - choose_buffer_next(ch); - if (ch->buffer_xfer != NULL) - cl->buffer_started(cl->cookie, ch->buffer_xfer); - break; - - case STATE_ON: - cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error); - ch->buffer_xfer = ch->buffer_next; - choose_buffer_next(ch); - cl->buffer_started(cl->cookie, ch->buffer_xfer); - break; - - case STATE_NEXT: - pr_crit("dma interrupt while next\n"); - BUG(); - break; - } - - v = readl(ch->base + M2P_CONTROL) & ~(M2P_CONTROL_STALL_IRQ_EN | - M2P_CONTROL_NFB_IRQ_EN); - if (ch->buffer_xfer != NULL) - v |= M2P_CONTROL_STALL_IRQ_EN; - if (ch->buffer_next != NULL) - v |= M2P_CONTROL_NFB_IRQ_EN; - m2p_set_control(ch, v); - - spin_unlock(&ch->lock); - return IRQ_HANDLED; -} - -static struct m2p_channel *find_free_channel(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch; - int i; - - if (cl->flags & EP93XX_DMA_M2P_RX) - ch = m2p_rx; - else - ch = m2p_tx; - - for (i = 0; ch[i].base; i++) { - struct ep93xx_dma_m2p_client *client; - - client = ch[i].client; - if (client != NULL) { - int port; - - port = cl->flags & EP93XX_DMA_M2P_PORT_MASK; - if (port == (client->flags & - EP93XX_DMA_M2P_PORT_MASK)) { - pr_warning("DMA channel already used by %s\n", - cl->name ? : "unknown client"); - return ERR_PTR(-EBUSY); - } - } - } - - for (i = 0; ch[i].base; i++) { - if (ch[i].client == NULL) - return ch + i; - } - - pr_warning("No free DMA channel for %s\n", - cl->name ? : "unknown client"); - return ERR_PTR(-ENODEV); -} - -static void channel_enable(struct m2p_channel *ch) -{ - struct ep93xx_dma_m2p_client *cl = ch->client; - u32 v; - - clk_enable(ch->clk); - - v = cl->flags & EP93XX_DMA_M2P_PORT_MASK; - writel(v, ch->base + M2P_PPALLOC); - - v = cl->flags & EP93XX_DMA_M2P_ERROR_MASK; - v |= M2P_CONTROL_ENABLE | M2P_CONTROL_ERROR_IRQ_EN; - m2p_set_control(ch, v); -} - -static void channel_disable(struct m2p_channel *ch) -{ - u32 v; - - v = readl(ch->base + M2P_CONTROL); - v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN); - m2p_set_control(ch, v); - - while (m2p_channel_state(ch) >= STATE_ON) - cpu_relax(); - - m2p_set_control(ch, 0x0); - - while (m2p_channel_state(ch) == STATE_STALL) - cpu_relax(); - - clk_disable(ch->clk); -} - -int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch; - int err; - - ch = find_free_channel(cl); - if (IS_ERR(ch)) - return PTR_ERR(ch); - - err = request_irq(ch->irq, m2p_irq, 0, cl->name ? : "dma-m2p", ch); - if (err) - return err; - - ch->client = cl; - ch->next_slot = 0; - ch->buffer_xfer = NULL; - ch->buffer_next = NULL; - INIT_LIST_HEAD(&ch->buffers_pending); - - cl->channel = ch; - - channel_enable(ch); - - return 0; -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_register); - -void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch = cl->channel; - - channel_disable(ch); - free_irq(ch->irq, ch); - ch->client = NULL; -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_unregister); - -void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *cl, - struct ep93xx_dma_buffer *buf) -{ - struct m2p_channel *ch = cl->channel; - unsigned long flags; - u32 v; - - spin_lock_irqsave(&ch->lock, flags); - v = readl(ch->base + M2P_CONTROL); - if (ch->buffer_xfer == NULL) { - ch->buffer_xfer = buf; - feed_buf(ch, buf); - cl->buffer_started(cl->cookie, buf); - - v |= M2P_CONTROL_STALL_IRQ_EN; - m2p_set_control(ch, v); - - } else if (ch->buffer_next == NULL) { - ch->buffer_next = buf; - feed_buf(ch, buf); - - v |= M2P_CONTROL_NFB_IRQ_EN; - m2p_set_control(ch, v); - } else { - list_add_tail(&buf->list, &ch->buffers_pending); - } - spin_unlock_irqrestore(&ch->lock, flags); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit); - -void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *cl, - struct ep93xx_dma_buffer *buf) -{ - struct m2p_channel *ch = cl->channel; - - list_add_tail(&buf->list, &ch->buffers_pending); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit_recursive); - -void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch = cl->channel; - - channel_disable(ch); - ch->next_slot = 0; - ch->buffer_xfer = NULL; - ch->buffer_next = NULL; - INIT_LIST_HEAD(&ch->buffers_pending); - channel_enable(ch); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_flush); - -static int init_channel(struct m2p_channel *ch) -{ - ch->clk = clk_get(NULL, ch->name); - if (IS_ERR(ch->clk)) - return PTR_ERR(ch->clk); - - spin_lock_init(&ch->lock); - ch->client = NULL; - - return 0; -} - -static int __init ep93xx_dma_m2p_init(void) -{ - int i; - int ret; - - for (i = 0; m2p_rx[i].base; i++) { - ret = init_channel(m2p_rx + i); - if (ret) - return ret; - } - - for (i = 0; m2p_tx[i].base; i++) { - ret = init_channel(m2p_tx + i); - if (ret) - return ret; - } - - pr_info("M2P DMA subsystem initialized\n"); - return 0; -} -arch_initcall(ep93xx_dma_m2p_init); diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c new file mode 100644 index 0000000..5a25708 --- /dev/null +++ b/arch/arm/mach-ep93xx/dma.c @@ -0,0 +1,108 @@ +/* + * arch/arm/mach-ep93xx/dma.c + * + * Platform support code for the EP93xx dmaengine driver. + * + * Copyright (C) 2011 Mika Westerberg + * + * This work is based on the original dma-m2p implementation with + * following copyrights: + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * Copyright (C) 2006 Applied Data Systems + * Copyright (C) 2009 Ryan Mallon <rmallon@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <mach/dma.h> +#include <mach/hardware.h> + +#define DMA_CHANNEL(_name, _base, _irq) \ + { .name = (_name), .base = (_base), .irq = (_irq) } + +/* + * DMA M2P channels. + * + * On the EP93xx chip the following peripherals my be allocated to the 10 + * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive). + * + * I2S contains 3 Tx and 3 Rx DMA Channels + * AAC contains 3 Tx and 3 Rx DMA Channels + * UART1 contains 1 Tx and 1 Rx DMA Channels + * UART2 contains 1 Tx and 1 Rx DMA Channels + * UART3 contains 1 Tx and 1 Rx DMA Channels + * IrDA contains 1 Tx and 1 Rx DMA Channels + * + * Registers are mapped statically in ep93xx_map_io(). + */ +static struct ep93xx_dma_chan_data ep93xx_dma_m2p_channels[] = { + DMA_CHANNEL("m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0), + DMA_CHANNEL("m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1), + DMA_CHANNEL("m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2), + DMA_CHANNEL("m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3), + DMA_CHANNEL("m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4), + DMA_CHANNEL("m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5), + DMA_CHANNEL("m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6), + DMA_CHANNEL("m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7), + DMA_CHANNEL("m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8), + DMA_CHANNEL("m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9), +}; + +static struct ep93xx_dma_platform_data ep93xx_dma_m2p_data = { + .channels = ep93xx_dma_m2p_channels, + .num_channels = ARRAY_SIZE(ep93xx_dma_m2p_channels), +}; + +static struct platform_device ep93xx_dma_m2p_device = { + .name = "ep93xx-dma-m2p", + .id = -1, + .dev = { + .platform_data = &ep93xx_dma_m2p_data, + }, +}; + +/* + * DMA M2M channels. + * + * There are 2 M2M channels which support memcpy/memset and in addition simple + * hardware requests from/to SSP and IDE. We do not implement an external + * hardware requests. + * + * Registers are mapped statically in ep93xx_map_io(). + */ +static struct ep93xx_dma_chan_data ep93xx_dma_m2m_channels[] = { + DMA_CHANNEL("m2m0", EP93XX_DMA_BASE + 0x0100, IRQ_EP93XX_DMAM2M0), + DMA_CHANNEL("m2m1", EP93XX_DMA_BASE + 0x0140, IRQ_EP93XX_DMAM2M1), +}; + +static struct ep93xx_dma_platform_data ep93xx_dma_m2m_data = { + .channels = ep93xx_dma_m2m_channels, + .num_channels = ARRAY_SIZE(ep93xx_dma_m2m_channels), +}; + +static struct platform_device ep93xx_dma_m2m_device = { + .name = "ep93xx-dma-m2m", + .id = -1, + .dev = { + .platform_data = &ep93xx_dma_m2m_data, + }, +}; + +static int __init ep93xx_dma_init(void) +{ + platform_device_register(&ep93xx_dma_m2p_device); + platform_device_register(&ep93xx_dma_m2m_device); + return 0; +} +arch_initcall(ep93xx_dma_init); diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h index 5e31b2b..46d4d87 100644 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ b/arch/arm/mach-ep93xx/include/mach/dma.h @@ -1,149 +1,93 @@ -/** - * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine - * - * The EP93xx DMA M2P subsystem handles DMA transfers between memory and - * peripherals. DMA M2P channels are available for audio, UARTs and IrDA. - * See chapter 10 of the EP93xx users guide for full details on the DMA M2P - * engine. - * - * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code. - * - */ - #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#include <linux/list.h> #include <linux/types.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> -/** - * struct ep93xx_dma_buffer - Information about a buffer to be transferred - * using the DMA M2P engine +/* + * M2P channels. * - * @list: Entry in DMA buffer list - * @bus_addr: Physical address of the buffer - * @size: Size of the buffer in bytes + * Note that these values are also directly used for setting the PPALLOC + * register. */ -struct ep93xx_dma_buffer { - struct list_head list; - u32 bus_addr; - u16 size; -}; +#define EP93XX_DMA_I2S1 0 +#define EP93XX_DMA_I2S2 1 +#define EP93XX_DMA_AAC1 2 +#define EP93XX_DMA_AAC2 3 +#define EP93XX_DMA_AAC3 4 +#define EP93XX_DMA_I2S3 5 +#define EP93XX_DMA_UART1 6 +#define EP93XX_DMA_UART2 7 +#define EP93XX_DMA_UART3 8 +#define EP93XX_DMA_IRDA 9 +/* M2M channels */ +#define EP93XX_DMA_SSP 10 +#define EP93XX_DMA_IDE 11 /** - * struct ep93xx_dma_m2p_client - Information about a DMA M2P client - * - * @name: Unique name for this client - * @flags: Client flags - * @cookie: User data to pass to callback functions - * @buffer_started: Non NULL function to call when a transfer is started. - * The arguments are the user data cookie and the DMA - * buffer which is starting. - * @buffer_finished: Non NULL function to call when a transfer is completed. - * The arguments are the user data cookie, the DMA buffer - * which has completed, and a boolean flag indicating if - * the transfer had an error. + * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine + * @port: peripheral which is requesting the channel + * @direction: TX/RX channel + * @name: optional name for the channel, this is displayed in /proc/interrupts + * + * This information is passed as private channel parameter in a filter + * function. Note that this is only needed for slave/cyclic channels. For + * memcpy channels %NULL data should be passed. */ -struct ep93xx_dma_m2p_client { - char *name; - u8 flags; - void *cookie; - void (*buffer_started)(void *cookie, - struct ep93xx_dma_buffer *buf); - void (*buffer_finished)(void *cookie, - struct ep93xx_dma_buffer *buf, - int bytes, int error); - - /* private: Internal use only */ - void *channel; +struct ep93xx_dma_data { + int port; + enum dma_data_direction direction; + const char *name; }; -/* DMA M2P ports */ -#define EP93XX_DMA_M2P_PORT_I2S1 0x00 -#define EP93XX_DMA_M2P_PORT_I2S2 0x01 -#define EP93XX_DMA_M2P_PORT_AAC1 0x02 -#define EP93XX_DMA_M2P_PORT_AAC2 0x03 -#define EP93XX_DMA_M2P_PORT_AAC3 0x04 -#define EP93XX_DMA_M2P_PORT_I2S3 0x05 -#define EP93XX_DMA_M2P_PORT_UART1 0x06 -#define EP93XX_DMA_M2P_PORT_UART2 0x07 -#define EP93XX_DMA_M2P_PORT_UART3 0x08 -#define EP93XX_DMA_M2P_PORT_IRDA 0x09 -#define EP93XX_DMA_M2P_PORT_MASK 0x0f - -/* DMA M2P client flags */ -#define EP93XX_DMA_M2P_TX 0x00 /* Memory to peripheral */ -#define EP93XX_DMA_M2P_RX 0x10 /* Peripheral to memory */ - -/* - * DMA M2P client error handling flags. See the EP93xx users guide - * documentation on the DMA M2P CONTROL register for more details - */ -#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 /* Abort on peripheral error */ -#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 /* Ignore peripheral errors */ -#define EP93XX_DMA_M2P_ERROR_MASK 0x60 /* Mask of error bits */ - /** - * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P - * subsystem - * - * @m2p: Client information to register - * returns 0 on success - * - * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA - * client + * struct ep93xx_dma_chan_data - platform specific data for a DMA channel + * @name: name of the channel, used for getting the right clock for the channel + * @base: mapped registers + * @irq: interrupt number used by this channel */ -int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p); +struct ep93xx_dma_chan_data { + const char *name; + void __iomem *base; + int irq; +}; /** - * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P - * subsystem - * - * @m2p: Client to unregister + * struct ep93xx_dma_platform_data - platform data for the dmaengine driver + * @channels: array of channels which are passed to the driver + * @num_channels: number of channels in the array * - * Any transfers currently in progress will be completed in hardware, but - * ignored in software. + * This structure is passed to the DMA engine driver via platform data. For + * M2P channels, contract is that even channels are for TX and odd for RX. + * There is no requirement for the M2M channels. */ -void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p); +struct ep93xx_dma_platform_data { + struct ep93xx_dma_chan_data *channels; + size_t num_channels; +}; -/** - * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer - * - * @m2p: DMA Client to submit the transfer on - * @buf: DMA Buffer to submit - * - * If the current or next transfer positions are free on the M2P client then - * the transfer is started immediately. If not, the transfer is added to the - * list of pending transfers. This function must not be called from the - * buffer_finished callback for an M2P channel. - * - */ -void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p, - struct ep93xx_dma_buffer *buf); +static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); +} /** - * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list - * for an M2P channel + * ep93xx_dma_chan_direction - returns direction the channel can be used + * @chan: channel * - * @m2p: DMA Client to submit the transfer on - * @buf: DMA Buffer to submit - * - * This function must only be called from the buffer_finished callback for an - * M2P channel. It is commonly used to add the next transfer in a chained list - * of DMA transfers. + * This function can be used in filter functions to find out whether the + * channel supports given DMA direction. Only M2P channels have such + * limitation, for M2M channels the direction is configurable. */ -void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p, - struct ep93xx_dma_buffer *buf); +static inline enum dma_data_direction +ep93xx_dma_chan_direction(struct dma_chan *chan) +{ + if (!ep93xx_dma_chan_is_m2p(chan)) + return DMA_NONE; -/** - * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client - * - * @m2p: DMA client to flush transfers on - * - * Any transfers currently in progress will be completed in hardware, but - * ignored in software. - * - */ -void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p); + /* even channels are for TX, odd for RX */ + return (chan->chan_id % 2 == 0) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; +} #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h index 0a37961..9bb63ac 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h @@ -7,9 +7,11 @@ struct spi_device; * struct ep93xx_spi_info - EP93xx specific SPI descriptor * @num_chipselect: number of chip selects on this board, must be * at least one + * @use_dma: use DMA for the transfers */ struct ep93xx_spi_info { int num_chipselect; + bool use_dma; }; /** diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c index a65838f..af1c580 100644 --- a/arch/arm/mach-imx/clock-imx25.c +++ b/arch/arm/mach-imx/clock-imx25.c @@ -282,9 +282,10 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) - _REGISTER_CLOCK("imx25-cspi.0", NULL, cspi1_clk) - _REGISTER_CLOCK("imx25-cspi.1", NULL, cspi2_clk) - _REGISTER_CLOCK("imx25-cspi.2", NULL, cspi3_clk) + /* i.mx25 has the i.mx35 type cspi */ + _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk) + _REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk) + _REGISTER_CLOCK("imx35-cspi.2", NULL, cspi3_clk) _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk) _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk) _REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk) diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 6b89c1b..cd79e34 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -1442,7 +1442,8 @@ static struct clk_lookup mx51_lookups[] = { _REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk) _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk) _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk) - _REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk) + /* i.mx51 has the i.mx35 type cspi */ + _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk) @@ -1471,9 +1472,11 @@ static struct clk_lookup mx53_lookups[] = { _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_mx53_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_mx53_clk) _REGISTER_CLOCK("sdhci-esdhc-imx.3", NULL, esdhc4_mx53_clk) - _REGISTER_CLOCK("imx53-ecspi.0", NULL, ecspi1_clk) - _REGISTER_CLOCK("imx53-ecspi.1", NULL, ecspi2_clk) - _REGISTER_CLOCK("imx53-cspi.0", NULL, cspi_clk) + /* i.mx53 has the i.mx51 type ecspi */ + _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk) + _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk) + /* i.mx53 has the i.mx25 type cspi */ + _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk) _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk) _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk) }; diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h deleted file mode 100644 index dcef228..0000000 --- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h +++ /dev/null @@ -1,28 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/spi-gpio.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - SPI Controller platform_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SPIGPIO_H -#define __ASM_ARCH_SPIGPIO_H __FILE__ - -struct s3c2410_spigpio_info { - unsigned long pin_clk; - unsigned long pin_mosi; - unsigned long pin_miso; - - int num_chipselect; - int bus_num; - - void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs); -}; - - -#endif /* __ASM_ARCH_SPIGPIO_H */ diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index e8f49fe..f44f775 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -32,7 +32,7 @@ #include <linux/platform_device.h> #include <linux/serial_core.h> #include <linux/spi/spi.h> -#include <linux/spi/spi_bitbang.h> +#include <linux/spi/spi_gpio.h> #include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -53,8 +53,6 @@ #include <mach/fb.h> #include <plat/nand.h> #include <plat/udc.h> -#include <mach/spi.h> -#include <mach/spi-gpio.h> #include <plat/iic.h> #include <plat/common-smdk.h> @@ -216,32 +214,16 @@ static struct platform_device qt2410_led = { /* SPI */ -static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs) -{ - switch (cs) { - case BITBANG_CS_ACTIVE: - gpio_set_value(S3C2410_GPB(5), 0); - break; - case BITBANG_CS_INACTIVE: - gpio_set_value(S3C2410_GPB(5), 1); - break; - } -} - -static struct s3c2410_spigpio_info spi_gpio_cfg = { - .pin_clk = S3C2410_GPG(7), - .pin_mosi = S3C2410_GPG(6), - .pin_miso = S3C2410_GPG(5), - .chip_select = &spi_gpio_cs, +static struct spi_gpio_platform_data spi_gpio_cfg = { + .sck = S3C2410_GPG(7), + .mosi = S3C2410_GPG(6), + .miso = S3C2410_GPG(5), }; - static struct platform_device qt2410_spi = { - .name = "s3c24xx-spi-gpio", - .id = 1, - .dev = { - .platform_data = &spi_gpio_cfg, - }, + .name = "spi-gpio", + .id = 1, + .dev.platform_data = &spi_gpio_cfg, }; /* Board devices */ diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 85dcaeb..5eeb475 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -25,6 +25,7 @@ #include <video/ili9320.h> #include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -38,7 +39,6 @@ #include <mach/regs-gpio.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> -#include <mach/spi-gpio.h> #include <mach/fb.h> #include <asm/mach-types.h> @@ -389,45 +389,30 @@ static struct ili9320_platdata jive_lcm_config = { /* LCD SPI support */ -static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs) -{ - gpio_set_value(S3C2410_GPB(7), cs ? 0 : 1); -} - -static struct s3c2410_spigpio_info jive_lcd_spi = { - .bus_num = 1, - .pin_clk = S3C2410_GPG(8), - .pin_mosi = S3C2410_GPB(8), - .num_chipselect = 1, - .chip_select = jive_lcd_spi_chipselect, +static struct spi_gpio_platform_data jive_lcd_spi = { + .sck = S3C2410_GPG(8), + .mosi = S3C2410_GPB(8), + .miso = SPI_GPIO_NO_MISO, }; static struct platform_device jive_device_lcdspi = { - .name = "spi_s3c24xx_gpio", + .name = "spi-gpio", .id = 1, - .num_resources = 0, .dev.platform_data = &jive_lcd_spi, }; -/* WM8750 audio code SPI definition */ -static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs) -{ - gpio_set_value(S3C2410_GPH(10), cs ? 0 : 1); -} +/* WM8750 audio code SPI definition */ -static struct s3c2410_spigpio_info jive_wm8750_spi = { - .bus_num = 2, - .pin_clk = S3C2410_GPB(4), - .pin_mosi = S3C2410_GPB(9), - .num_chipselect = 1, - .chip_select = jive_wm8750_chipselect, +static struct spi_gpio_platform_data jive_wm8750_spi = { + .sck = S3C2410_GPB(4), + .mosi = S3C2410_GPB(9), + .miso = SPI_GPIO_NO_MISO, }; static struct platform_device jive_device_wm8750 = { - .name = "spi_s3c24xx_gpio", + .name = "spi-gpio", .id = 2, - .num_resources = 0, .dev.platform_data = &jive_wm8750_spi, }; @@ -441,12 +426,14 @@ static struct spi_board_info __initdata jive_spi_devs[] = { .mode = SPI_MODE_3, /* CPOL=1, CPHA=1 */ .max_speed_hz = 100000, .platform_data = &jive_lcm_config, + .controller_data = (void *)S3C2410_GPB(7), }, { .modalias = "WM8750", .bus_num = 2, .chip_select = 0, .mode = SPI_MODE_0, /* CPOL=0, CPHA=0 */ .max_speed_hz = 100000, + .controller_data = (void *)S3C2410_GPH(10), }, }; diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 7166620..c10ddf4 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -74,7 +74,6 @@ #include <mach/fb.h> #include <mach/spi.h> -#include <mach/spi-gpio.h> #include <plat/usb-control.h> #include <mach/regs-mem.h> #include <mach/hardware.h> diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c index f97eb36..9bfae8b 100644 --- a/arch/arm/plat-mxc/devices/platform-spi_imx.c +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -40,9 +40,10 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { #endif #ifdef CONFIG_SOC_IMX25 +/* i.mx25 has the i.mx35 type cspi */ const struct imx_spi_imx_data imx25_cspi_data[] __initconst = { #define imx25_cspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX25, CSPI, "imx25-cspi", _id, _hwid, SZ_16K) + imx_spi_imx_data_entry(MX25, CSPI, "imx35-cspi", _id, _hwid, SZ_16K) imx25_cspi_data_entry(0, 1), imx25_cspi_data_entry(1, 2), imx25_cspi_data_entry(2, 3), @@ -79,8 +80,9 @@ const struct imx_spi_imx_data imx35_cspi_data[] __initconst = { #endif /* ifdef CONFIG_SOC_IMX35 */ #ifdef CONFIG_SOC_IMX51 +/* i.mx51 has the i.mx35 type cspi */ const struct imx_spi_imx_data imx51_cspi_data __initconst = - imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 2, , SZ_4K); + imx_spi_imx_data_entry_single(MX51, CSPI, "imx35-cspi", 2, , SZ_4K); const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = { #define imx51_ecspi_data_entry(_id, _hwid) \ @@ -91,12 +93,14 @@ const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = { #endif /* ifdef CONFIG_SOC_IMX51 */ #ifdef CONFIG_SOC_IMX53 +/* i.mx53 has the i.mx35 type cspi */ const struct imx_spi_imx_data imx53_cspi_data __initconst = - imx_spi_imx_data_entry_single(MX53, CSPI, "imx53-cspi", 0, , SZ_4K); + imx_spi_imx_data_entry_single(MX53, CSPI, "imx35-cspi", 0, , SZ_4K); +/* i.mx53 has the i.mx51 type ecspi */ const struct imx_spi_imx_data imx53_ecspi_data[] __initconst = { #define imx53_ecspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX53, ECSPI, "imx53-ecspi", _id, _hwid, SZ_4K) + imx_spi_imx_data_entry(MX53, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K) imx53_ecspi_data_entry(0, 1), imx53_ecspi_data_entry(1, 2), }; diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 25cf327..2e3b3d3 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -237,6 +237,13 @@ config MXS_DMA Support the MXS DMA engine. This engine including APBH-DMA and APBX-DMA is integrated into Freescale i.MX23/28 chips. +config EP93XX_DMA + bool "Cirrus Logic EP93xx DMA support" + depends on ARCH_EP93XX + select DMA_ENGINE + help + Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller. + config DMA_ENGINE bool diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 836095a..30cf3b1 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -25,3 +25,4 @@ obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o obj-$(CONFIG_PL330_DMA) += pl330.o obj-$(CONFIG_PCH_DMA) += pch_dma.o obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o +obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c new file mode 100644 index 0000000..0766c1e --- /dev/null +++ b/drivers/dma/ep93xx_dma.c @@ -0,0 +1,1355 @@ +/* + * Driver for the Cirrus Logic EP93xx DMA Controller + * + * Copyright (C) 2011 Mika Westerberg + * + * DMA M2P implementation is based on the original + * arch/arm/mach-ep93xx/dma-m2p.c which has following copyrights: + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * Copyright (C) 2006 Applied Data Systems + * Copyright (C) 2009 Ryan Mallon <rmallon@gmail.com> + * + * This driver is based on dw_dmac and amba-pl08x drivers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/dmaengine.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <mach/dma.h> + +/* M2P registers */ +#define M2P_CONTROL 0x0000 +#define M2P_CONTROL_STALLINT BIT(0) +#define M2P_CONTROL_NFBINT BIT(1) +#define M2P_CONTROL_CH_ERROR_INT BIT(3) +#define M2P_CONTROL_ENABLE BIT(4) +#define M2P_CONTROL_ICE BIT(6) + +#define M2P_INTERRUPT 0x0004 +#define M2P_INTERRUPT_STALL BIT(0) +#define M2P_INTERRUPT_NFB BIT(1) +#define M2P_INTERRUPT_ERROR BIT(3) + +#define M2P_PPALLOC 0x0008 +#define M2P_STATUS 0x000c + +#define M2P_MAXCNT0 0x0020 +#define M2P_BASE0 0x0024 +#define M2P_MAXCNT1 0x0030 +#define M2P_BASE1 0x0034 + +#define M2P_STATE_IDLE 0 +#define M2P_STATE_STALL 1 +#define M2P_STATE_ON 2 +#define M2P_STATE_NEXT 3 + +/* M2M registers */ +#define M2M_CONTROL 0x0000 +#define M2M_CONTROL_DONEINT BIT(2) +#define M2M_CONTROL_ENABLE BIT(3) +#define M2M_CONTROL_START BIT(4) +#define M2M_CONTROL_DAH BIT(11) +#define M2M_CONTROL_SAH BIT(12) +#define M2M_CONTROL_PW_SHIFT 9 +#define M2M_CONTROL_PW_8 (0 << M2M_CONTROL_PW_SHIFT) +#define M2M_CONTROL_PW_16 (1 << M2M_CONTROL_PW_SHIFT) +#define M2M_CONTROL_PW_32 (2 << M2M_CONTROL_PW_SHIFT) +#define M2M_CONTROL_PW_MASK (3 << M2M_CONTROL_PW_SHIFT) +#define M2M_CONTROL_TM_SHIFT 13 +#define M2M_CONTROL_TM_TX (1 << M2M_CONTROL_TM_SHIFT) +#define M2M_CONTROL_TM_RX (2 << M2M_CONTROL_TM_SHIFT) +#define M2M_CONTROL_RSS_SHIFT 22 +#define M2M_CONTROL_RSS_SSPRX (1 << M2M_CONTROL_RSS_SHIFT) +#define M2M_CONTROL_RSS_SSPTX (2 << M2M_CONTROL_RSS_SHIFT) +#define M2M_CONTROL_RSS_IDE (3 << M2M_CONTROL_RSS_SHIFT) +#define M2M_CONTROL_NO_HDSK BIT(24) +#define M2M_CONTROL_PWSC_SHIFT 25 + +#define M2M_INTERRUPT 0x0004 +#define M2M_INTERRUPT_DONEINT BIT(1) + +#define M2M_BCR0 0x0010 +#define M2M_BCR1 0x0014 +#define M2M_SAR_BASE0 0x0018 +#define M2M_SAR_BASE1 0x001c +#define M2M_DAR_BASE0 0x002c +#define M2M_DAR_BASE1 0x0030 + +#define DMA_MAX_CHAN_BYTES 0xffff +#define DMA_MAX_CHAN_DESCRIPTORS 32 + +struct ep93xx_dma_engine; + +/** + * struct ep93xx_dma_desc - EP93xx specific transaction descriptor + * @src_addr: source address of the transaction + * @dst_addr: destination address of the transaction + * @size: size of the transaction (in bytes) + * @complete: this descriptor is completed + * @txd: dmaengine API descriptor + * @tx_list: list of linked descriptors + * @node: link used for putting this into a channel queue + */ +struct ep93xx_dma_desc { + u32 src_addr; + u32 dst_addr; + size_t size; + bool complete; + struct dma_async_tx_descriptor txd; + struct list_head tx_list; + struct list_head node; +}; + +/** + * struct ep93xx_dma_chan - an EP93xx DMA M2P/M2M channel + * @chan: dmaengine API channel + * @edma: pointer to to the engine device + * @regs: memory mapped registers + * @irq: interrupt number of the channel + * @clk: clock used by this channel + * @tasklet: channel specific tasklet used for callbacks + * @lock: lock protecting the fields following + * @flags: flags for the channel + * @buffer: which buffer to use next (0/1) + * @last_completed: last completed cookie value + * @active: flattened chain of descriptors currently being processed + * @queue: pending descriptors which are handled next + * @free_list: list of free descriptors which can be used + * @runtime_addr: physical address currently used as dest/src (M2M only). This + * is set via %DMA_SLAVE_CONFIG before slave operation is + * prepared + * @runtime_ctrl: M2M runtime values for the control register. + * + * As EP93xx DMA controller doesn't support real chained DMA descriptors we + * will have slightly different scheme here: @active points to a head of + * flattened DMA descriptor chain. + * + * @queue holds pending transactions. These are linked through the first + * descriptor in the chain. When a descriptor is moved to the @active queue, + * the first and chained descriptors are flattened into a single list. + * + * @chan.private holds pointer to &struct ep93xx_dma_data which contains + * necessary channel configuration information. For memcpy channels this must + * be %NULL. + */ +struct ep93xx_dma_chan { + struct dma_chan chan; + const struct ep93xx_dma_engine *edma; + void __iomem *regs; + int irq; + struct clk *clk; + struct tasklet_struct tasklet; + /* protects the fields following */ + spinlock_t lock; + unsigned long flags; +/* Channel is configured for cyclic transfers */ +#define EP93XX_DMA_IS_CYCLIC 0 + + int buffer; + dma_cookie_t last_completed; + struct list_head active; + struct list_head queue; + struct list_head free_list; + u32 runtime_addr; + u32 runtime_ctrl; +}; + +/** + * struct ep93xx_dma_engine - the EP93xx DMA engine instance + * @dma_dev: holds the dmaengine device + * @m2m: is this an M2M or M2P device + * @hw_setup: method which sets the channel up for operation + * @hw_shutdown: shuts the channel down and flushes whatever is left + * @hw_submit: pushes active descriptor(s) to the hardware + * @hw_interrupt: handle the interrupt + * @num_channels: number of channels for this instance + * @channels: array of channels + * + * There is one instance of this struct for the M2P channels and one for the + * M2M channels. hw_xxx() methods are used to perform operations which are + * different on M2M and M2P channels. These methods are called with channel + * lock held and interrupts disabled so they cannot sleep. + */ +struct ep93xx_dma_engine { + struct dma_device dma_dev; + bool m2m; + int (*hw_setup)(struct ep93xx_dma_chan *); + void (*hw_shutdown)(struct ep93xx_dma_chan *); + void (*hw_submit)(struct ep93xx_dma_chan *); + int (*hw_interrupt)(struct ep93xx_dma_chan *); +#define INTERRUPT_UNKNOWN 0 +#define INTERRUPT_DONE 1 +#define INTERRUPT_NEXT_BUFFER 2 + + size_t num_channels; + struct ep93xx_dma_chan channels[]; +}; + +static inline struct device *chan2dev(struct ep93xx_dma_chan *edmac) +{ + return &edmac->chan.dev->device; +} + +static struct ep93xx_dma_chan *to_ep93xx_dma_chan(struct dma_chan *chan) +{ + return container_of(chan, struct ep93xx_dma_chan, chan); +} + +/** + * ep93xx_dma_set_active - set new active descriptor chain + * @edmac: channel + * @desc: head of the new active descriptor chain + * + * Sets @desc to be the head of the new active descriptor chain. This is the + * chain which is processed next. The active list must be empty before calling + * this function. + * + * Called with @edmac->lock held and interrupts disabled. + */ +static void ep93xx_dma_set_active(struct ep93xx_dma_chan *edmac, + struct ep93xx_dma_desc *desc) +{ + BUG_ON(!list_empty(&edmac->active)); + + list_add_tail(&desc->node, &edmac->active); + + /* Flatten the @desc->tx_list chain into @edmac->active list */ + while (!list_empty(&desc->tx_list)) { + struct ep93xx_dma_desc *d = list_first_entry(&desc->tx_list, + struct ep93xx_dma_desc, node); + + /* + * We copy the callback parameters from the first descriptor + * to all the chained descriptors. This way we can call the + * callback without having to find out the first descriptor in + * the chain. Useful for cyclic transfers. + */ + d->txd.callback = desc->txd.callback; + d->txd.callback_param = desc->txd.callback_param; + + list_move_tail(&d->node, &edmac->active); + } +} + +/* Called with @edmac->lock held and interrupts disabled */ +static struct ep93xx_dma_desc * +ep93xx_dma_get_active(struct ep93xx_dma_chan *edmac) +{ + return list_first_entry(&edmac->active, struct ep93xx_dma_desc, node); +} + +/** + * ep93xx_dma_advance_active - advances to the next active descriptor + * @edmac: channel + * + * Function advances active descriptor to the next in the @edmac->active and + * returns %true if we still have descriptors in the chain to process. + * Otherwise returns %false. + * + * When the channel is in cyclic mode always returns %true. + * + * Called with @edmac->lock held and interrupts disabled. + */ +static bool ep93xx_dma_advance_active(struct ep93xx_dma_chan *edmac) +{ + list_rotate_left(&edmac->active); + + if (test_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags)) + return true; + + /* + * If txd.cookie is set it means that we are back in the first + * descriptor in the chain and hence done with it. + */ + return !ep93xx_dma_get_active(edmac)->txd.cookie; +} + +/* + * M2P DMA implementation + */ + +static void m2p_set_control(struct ep93xx_dma_chan *edmac, u32 control) +{ + writel(control, edmac->regs + M2P_CONTROL); + /* + * EP93xx User's Guide states that we must perform a dummy read after + * write to the control register. + */ + readl(edmac->regs + M2P_CONTROL); +} + +static int m2p_hw_setup(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_data *data = edmac->chan.private; + u32 control; + + writel(data->port & 0xf, edmac->regs + M2P_PPALLOC); + + control = M2P_CONTROL_CH_ERROR_INT | M2P_CONTROL_ICE + | M2P_CONTROL_ENABLE; + m2p_set_control(edmac, control); + + return 0; +} + +static inline u32 m2p_channel_state(struct ep93xx_dma_chan *edmac) +{ + return (readl(edmac->regs + M2P_STATUS) >> 4) & 0x3; +} + +static void m2p_hw_shutdown(struct ep93xx_dma_chan *edmac) +{ + u32 control; + + control = readl(edmac->regs + M2P_CONTROL); + control &= ~(M2P_CONTROL_STALLINT | M2P_CONTROL_NFBINT); + m2p_set_control(edmac, control); + + while (m2p_channel_state(edmac) >= M2P_STATE_ON) + cpu_relax(); + + m2p_set_control(edmac, 0); + + while (m2p_channel_state(edmac) == M2P_STATE_STALL) + cpu_relax(); +} + +static void m2p_fill_desc(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_desc *desc = ep93xx_dma_get_active(edmac); + u32 bus_addr; + + if (ep93xx_dma_chan_direction(&edmac->chan) == DMA_TO_DEVICE) + bus_addr = desc->src_addr; + else + bus_addr = desc->dst_addr; + + if (edmac->buffer == 0) { + writel(desc->size, edmac->regs + M2P_MAXCNT0); + writel(bus_addr, edmac->regs + M2P_BASE0); + } else { + writel(desc->size, edmac->regs + M2P_MAXCNT1); + writel(bus_addr, edmac->regs + M2P_BASE1); + } + + edmac->buffer ^= 1; +} + +static void m2p_hw_submit(struct ep93xx_dma_chan *edmac) +{ + u32 control = readl(edmac->regs + M2P_CONTROL); + + m2p_fill_desc(edmac); + control |= M2P_CONTROL_STALLINT; + + if (ep93xx_dma_advance_active(edmac)) { + m2p_fill_desc(edmac); + control |= M2P_CONTROL_NFBINT; + } + + m2p_set_control(edmac, control); +} + +static int m2p_hw_interrupt(struct ep93xx_dma_chan *edmac) +{ + u32 irq_status = readl(edmac->regs + M2P_INTERRUPT); + u32 control; + + if (irq_status & M2P_INTERRUPT_ERROR) { + struct ep93xx_dma_desc *desc = ep93xx_dma_get_active(edmac); + + /* Clear the error interrupt */ + writel(1, edmac->regs + M2P_INTERRUPT); + + /* + * It seems that there is no easy way of reporting errors back + * to client so we just report the error here and continue as + * usual. + * + * Revisit this when there is a mechanism to report back the + * errors. + */ + dev_err(chan2dev(edmac), + "DMA transfer failed! Details:\n" + "\tcookie : %d\n" + "\tsrc_addr : 0x%08x\n" + "\tdst_addr : 0x%08x\n" + "\tsize : %zu\n", + desc->txd.cookie, desc->src_addr, desc->dst_addr, + desc->size); + } + + switch (irq_status & (M2P_INTERRUPT_STALL | M2P_INTERRUPT_NFB)) { + case M2P_INTERRUPT_STALL: + /* Disable interrupts */ + control = readl(edmac->regs + M2P_CONTROL); + control &= ~(M2P_CONTROL_STALLINT | M2P_CONTROL_NFBINT); + m2p_set_control(edmac, control); + + return INTERRUPT_DONE; + + case M2P_INTERRUPT_NFB: + if (ep93xx_dma_advance_active(edmac)) + m2p_fill_desc(edmac); + + return INTERRUPT_NEXT_BUFFER; + } + + return INTERRUPT_UNKNOWN; +} + +/* + * M2M DMA implementation + * + * For the M2M transfers we don't use NFB at all. This is because it simply + * doesn't work well with memcpy transfers. When you submit both buffers it is + * extremely unlikely that you get an NFB interrupt, but it instead reports + * DONE interrupt and both buffers are already transferred which means that we + * weren't able to update the next buffer. + * + * So for now we "simulate" NFB by just submitting buffer after buffer + * without double buffering. + */ + +static int m2m_hw_setup(struct ep93xx_dma_chan *edmac) +{ + const struct ep93xx_dma_data *data = edmac->chan.private; + u32 control = 0; + + if (!data) { + /* This is memcpy channel, nothing to configure */ + writel(control, edmac->regs + M2M_CONTROL); + return 0; + } + + switch (data->port) { + case EP93XX_DMA_SSP: + /* + * This was found via experimenting - anything less than 5 + * causes the channel to perform only a partial transfer which + * leads to problems since we don't get DONE interrupt then. + */ + control = (5 << M2M_CONTROL_PWSC_SHIFT); + control |= M2M_CONTROL_NO_HDSK; + + if (data->direction == DMA_TO_DEVICE) { + control |= M2M_CONTROL_DAH; + control |= M2M_CONTROL_TM_TX; + control |= M2M_CONTROL_RSS_SSPTX; + } else { + control |= M2M_CONTROL_SAH; + control |= M2M_CONTROL_TM_RX; + control |= M2M_CONTROL_RSS_SSPRX; + } + break; + + case EP93XX_DMA_IDE: + /* + * This IDE part is totally untested. Values below are taken + * from the EP93xx Users's Guide and might not be correct. + */ + control |= M2M_CONTROL_NO_HDSK; + control |= M2M_CONTROL_RSS_IDE; + control |= M2M_CONTROL_PW_16; + + if (data->direction == DMA_TO_DEVICE) { + /* Worst case from the UG */ + control = (3 << M2M_CONTROL_PWSC_SHIFT); + control |= M2M_CONTROL_DAH; + control |= M2M_CONTROL_TM_TX; + } else { + control = (2 << M2M_CONTROL_PWSC_SHIFT); + control |= M2M_CONTROL_SAH; + control |= M2M_CONTROL_TM_RX; + } + break; + + default: + return -EINVAL; + } + + writel(control, edmac->regs + M2M_CONTROL); + return 0; +} + +static void m2m_hw_shutdown(struct ep93xx_dma_chan *edmac) +{ + /* Just disable the channel */ + writel(0, edmac->regs + M2M_CONTROL); +} + +static void m2m_fill_desc(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_desc *desc = ep93xx_dma_get_active(edmac); + + if (edmac->buffer == 0) { + writel(desc->src_addr, edmac->regs + M2M_SAR_BASE0); + writel(desc->dst_addr, edmac->regs + M2M_DAR_BASE0); + writel(desc->size, edmac->regs + M2M_BCR0); + } else { + writel(desc->src_addr, edmac->regs + M2M_SAR_BASE1); + writel(desc->dst_addr, edmac->regs + M2M_DAR_BASE1); + writel(desc->size, edmac->regs + M2M_BCR1); + } + + edmac->buffer ^= 1; +} + +static void m2m_hw_submit(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_data *data = edmac->chan.private; + u32 control = readl(edmac->regs + M2M_CONTROL); + + /* + * Since we allow clients to configure PW (peripheral width) we always + * clear PW bits here and then set them according what is given in + * the runtime configuration. + */ + control &= ~M2M_CONTROL_PW_MASK; + control |= edmac->runtime_ctrl; + + m2m_fill_desc(edmac); + control |= M2M_CONTROL_DONEINT; + + /* + * Now we can finally enable the channel. For M2M channel this must be + * done _after_ the BCRx registers are programmed. + */ + control |= M2M_CONTROL_ENABLE; + writel(control, edmac->regs + M2M_CONTROL); + + if (!data) { + /* + * For memcpy channels the software trigger must be asserted + * in order to start the memcpy operation. + */ + control |= M2M_CONTROL_START; + writel(control, edmac->regs + M2M_CONTROL); + } +} + +static int m2m_hw_interrupt(struct ep93xx_dma_chan *edmac) +{ + u32 control; + + if (!(readl(edmac->regs + M2M_INTERRUPT) & M2M_INTERRUPT_DONEINT)) + return INTERRUPT_UNKNOWN; + + /* Clear the DONE bit */ + writel(0, edmac->regs + M2M_INTERRUPT); + + /* Disable interrupts and the channel */ + control = readl(edmac->regs + M2M_CONTROL); + control &= ~(M2M_CONTROL_DONEINT | M2M_CONTROL_ENABLE); + writel(control, edmac->regs + M2M_CONTROL); + + /* + * Since we only get DONE interrupt we have to find out ourselves + * whether there still is something to process. So we try to advance + * the chain an see whether it succeeds. + */ + if (ep93xx_dma_advance_active(edmac)) { + edmac->edma->hw_submit(edmac); + return INTERRUPT_NEXT_BUFFER; + } + + return INTERRUPT_DONE; +} + +/* + * DMA engine API implementation + */ + +static struct ep93xx_dma_desc * +ep93xx_dma_desc_get(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_desc *desc, *_desc; + struct ep93xx_dma_desc *ret = NULL; + unsigned long flags; + + spin_lock_irqsave(&edmac->lock, flags); + list_for_each_entry_safe(desc, _desc, &edmac->free_list, node) { + if (async_tx_test_ack(&desc->txd)) { + list_del_init(&desc->node); + + /* Re-initialize the descriptor */ + desc->src_addr = 0; + desc->dst_addr = 0; + desc->size = 0; + desc->complete = false; + desc->txd.cookie = 0; + desc->txd.callback = NULL; + desc->txd.callback_param = NULL; + + ret = desc; + break; + } + } + spin_unlock_irqrestore(&edmac->lock, flags); + return ret; +} + +static void ep93xx_dma_desc_put(struct ep93xx_dma_chan *edmac, + struct ep93xx_dma_desc *desc) +{ + if (desc) { + unsigned long flags; + + spin_lock_irqsave(&edmac->lock, flags); + list_splice_init(&desc->tx_list, &edmac->free_list); + list_add(&desc->node, &edmac->free_list); + spin_unlock_irqrestore(&edmac->lock, flags); + } +} + +/** + * ep93xx_dma_advance_work - start processing the next pending transaction + * @edmac: channel + * + * If we have pending transactions queued and we are currently idling, this + * function takes the next queued transaction from the @edmac->queue and + * pushes it to the hardware for execution. + */ +static void ep93xx_dma_advance_work(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_desc *new; + unsigned long flags; + + spin_lock_irqsave(&edmac->lock, flags); + if (!list_empty(&edmac->active) || list_empty(&edmac->queue)) { + spin_unlock_irqrestore(&edmac->lock, flags); + return; + } + + /* Take the next descriptor from the pending queue */ + new = list_first_entry(&edmac->queue, struct ep93xx_dma_desc, node); + list_del_init(&new->node); + + ep93xx_dma_set_active(edmac, new); + + /* Push it to the hardware */ + edmac->edma->hw_submit(edmac); + spin_unlock_irqrestore(&edmac->lock, flags); +} + +static void ep93xx_dma_unmap_buffers(struct ep93xx_dma_desc *desc) +{ + struct device *dev = desc->txd.chan->device->dev; + + if (!(desc->txd.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { + if (desc->txd.flags & DMA_COMPL_SRC_UNMAP_SINGLE) + dma_unmap_single(dev, desc->src_addr, desc->size, + DMA_TO_DEVICE); + else + dma_unmap_page(dev, desc->src_addr, desc->size, + DMA_TO_DEVICE); + } + if (!(desc->txd.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { + if (desc->txd.flags & DMA_COMPL_DEST_UNMAP_SINGLE) + dma_unmap_single(dev, desc->dst_addr, desc->size, + DMA_FROM_DEVICE); + else + dma_unmap_page(dev, desc->dst_addr, desc->size, + DMA_FROM_DEVICE); + } +} + +static void ep93xx_dma_tasklet(unsigned long data) +{ + struct ep93xx_dma_chan *edmac = (struct ep93xx_dma_chan *)data; + struct ep93xx_dma_desc *desc, *d; + dma_async_tx_callback callback; + void *callback_param; + LIST_HEAD(list); + + spin_lock_irq(&edmac->lock); + desc = ep93xx_dma_get_active(edmac); + if (desc->complete) { + edmac->last_completed = desc->txd.cookie; + list_splice_init(&edmac->active, &list); + } + spin_unlock_irq(&edmac->lock); + + /* Pick up the next descriptor from the queue */ + ep93xx_dma_advance_work(edmac); + + callback = desc->txd.callback; + callback_param = desc->txd.callback_param; + + /* Now we can release all the chained descriptors */ + list_for_each_entry_safe(desc, d, &list, node) { + /* + * For the memcpy channels the API requires us to unmap the + * buffers unless requested otherwise. + */ + if (!edmac->chan.private) + ep93xx_dma_unmap_buffers(desc); + + ep93xx_dma_desc_put(edmac, desc); + } + + if (callback) + callback(callback_param); +} + +static irqreturn_t ep93xx_dma_interrupt(int irq, void *dev_id) +{ + struct ep93xx_dma_chan *edmac = dev_id; + irqreturn_t ret = IRQ_HANDLED; + + spin_lock(&edmac->lock); + + switch (edmac->edma->hw_interrupt(edmac)) { + case INTERRUPT_DONE: + ep93xx_dma_get_active(edmac)->complete = true; + tasklet_schedule(&edmac->tasklet); + break; + + case INTERRUPT_NEXT_BUFFER: + if (test_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags)) + tasklet_schedule(&edmac->tasklet); + break; + + default: + dev_warn(chan2dev(edmac), "unknown interrupt!\n"); + ret = IRQ_NONE; + break; + } + + spin_unlock(&edmac->lock); + return ret; +} + +/** + * ep93xx_dma_tx_submit - set the prepared descriptor(s) to be executed + * @tx: descriptor to be executed + * + * Function will execute given descriptor on the hardware or if the hardware + * is busy, queue the descriptor to be executed later on. Returns cookie which + * can be used to poll the status of the descriptor. + */ +static dma_cookie_t ep93xx_dma_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(tx->chan); + struct ep93xx_dma_desc *desc; + dma_cookie_t cookie; + unsigned long flags; + + spin_lock_irqsave(&edmac->lock, flags); + + cookie = edmac->chan.cookie; + + if (++cookie < 0) + cookie = 1; + + desc = container_of(tx, struct ep93xx_dma_desc, txd); + + edmac->chan.cookie = cookie; + desc->txd.cookie = cookie; + + /* + * If nothing is currently prosessed, we push this descriptor + * directly to the hardware. Otherwise we put the descriptor + * to the pending queue. + */ + if (list_empty(&edmac->active)) { + ep93xx_dma_set_active(edmac, desc); + edmac->edma->hw_submit(edmac); + } else { + list_add_tail(&desc->node, &edmac->queue); + } + + spin_unlock_irqrestore(&edmac->lock, flags); + return cookie; +} + +/** + * ep93xx_dma_alloc_chan_resources - allocate resources for the channel + * @chan: channel to allocate resources + * + * Function allocates necessary resources for the given DMA channel and + * returns number of allocated descriptors for the channel. Negative errno + * is returned in case of failure. + */ +static int ep93xx_dma_alloc_chan_resources(struct dma_chan *chan) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_data *data = chan->private; + const char *name = dma_chan_name(chan); + int ret, i; + + /* Sanity check the channel parameters */ + if (!edmac->edma->m2m) { + if (!data) + return -EINVAL; + if (data->port < EP93XX_DMA_I2S1 || + data->port > EP93XX_DMA_IRDA) + return -EINVAL; + if (data->direction != ep93xx_dma_chan_direction(chan)) + return -EINVAL; + } else { + if (data) { + switch (data->port) { + case EP93XX_DMA_SSP: + case EP93XX_DMA_IDE: + if (data->direction != DMA_TO_DEVICE && + data->direction != DMA_FROM_DEVICE) + return -EINVAL; + break; + default: + return -EINVAL; + } + } + } + + if (data && data->name) + name = data->name; + + ret = clk_enable(edmac->clk); + if (ret) + return ret; + + ret = request_irq(edmac->irq, ep93xx_dma_interrupt, 0, name, edmac); + if (ret) + goto fail_clk_disable; + + spin_lock_irq(&edmac->lock); + edmac->last_completed = 1; + edmac->chan.cookie = 1; + ret = edmac->edma->hw_setup(edmac); + spin_unlock_irq(&edmac->lock); + + if (ret) + goto fail_free_irq; + + for (i = 0; i < DMA_MAX_CHAN_DESCRIPTORS; i++) { + struct ep93xx_dma_desc *desc; + + desc = kzalloc(sizeof(*desc), GFP_KERNEL); + if (!desc) { + dev_warn(chan2dev(edmac), "not enough descriptors\n"); + break; + } + + INIT_LIST_HEAD(&desc->tx_list); + + dma_async_tx_descriptor_init(&desc->txd, chan); + desc->txd.flags = DMA_CTRL_ACK; + desc->txd.tx_submit = ep93xx_dma_tx_submit; + + ep93xx_dma_desc_put(edmac, desc); + } + + return i; + +fail_free_irq: + free_irq(edmac->irq, edmac); +fail_clk_disable: + clk_disable(edmac->clk); + + return ret; +} + +/** + * ep93xx_dma_free_chan_resources - release resources for the channel + * @chan: channel + * + * Function releases all the resources allocated for the given channel. + * The channel must be idle when this is called. + */ +static void ep93xx_dma_free_chan_resources(struct dma_chan *chan) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_desc *desc, *d; + unsigned long flags; + LIST_HEAD(list); + + BUG_ON(!list_empty(&edmac->active)); + BUG_ON(!list_empty(&edmac->queue)); + + spin_lock_irqsave(&edmac->lock, flags); + edmac->edma->hw_shutdown(edmac); + edmac->runtime_addr = 0; + edmac->runtime_ctrl = 0; + edmac->buffer = 0; + list_splice_init(&edmac->free_list, &list); + spin_unlock_irqrestore(&edmac->lock, flags); + + list_for_each_entry_safe(desc, d, &list, node) + kfree(desc); + + clk_disable(edmac->clk); + free_irq(edmac->irq, edmac); +} + +/** + * ep93xx_dma_prep_dma_memcpy - prepare a memcpy DMA operation + * @chan: channel + * @dest: destination bus address + * @src: source bus address + * @len: size of the transaction + * @flags: flags for the descriptor + * + * Returns a valid DMA descriptor or %NULL in case of failure. + */ +struct dma_async_tx_descriptor * +ep93xx_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, + dma_addr_t src, size_t len, unsigned long flags) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_desc *desc, *first; + size_t bytes, offset; + + first = NULL; + for (offset = 0; offset < len; offset += bytes) { + desc = ep93xx_dma_desc_get(edmac); + if (!desc) { + dev_warn(chan2dev(edmac), "couln't get descriptor\n"); + goto fail; + } + + bytes = min_t(size_t, len - offset, DMA_MAX_CHAN_BYTES); + + desc->src_addr = src + offset; + desc->dst_addr = dest + offset; + desc->size = bytes; + + if (!first) + first = desc; + else + list_add_tail(&desc->node, &first->tx_list); + } + + first->txd.cookie = -EBUSY; + first->txd.flags = flags; + + return &first->txd; +fail: + ep93xx_dma_desc_put(edmac, first); + return NULL; +} + +/** + * ep93xx_dma_prep_slave_sg - prepare a slave DMA operation + * @chan: channel + * @sgl: list of buffers to transfer + * @sg_len: number of entries in @sgl + * @dir: direction of tha DMA transfer + * @flags: flags for the descriptor + * + * Returns a valid DMA descriptor or %NULL in case of failure. + */ +static struct dma_async_tx_descriptor * +ep93xx_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, + unsigned int sg_len, enum dma_data_direction dir, + unsigned long flags) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_desc *desc, *first; + struct scatterlist *sg; + int i; + + if (!edmac->edma->m2m && dir != ep93xx_dma_chan_direction(chan)) { + dev_warn(chan2dev(edmac), + "channel was configured with different direction\n"); + return NULL; + } + + if (test_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags)) { + dev_warn(chan2dev(edmac), + "channel is already used for cyclic transfers\n"); + return NULL; + } + + first = NULL; + for_each_sg(sgl, sg, sg_len, i) { + size_t sg_len = sg_dma_len(sg); + + if (sg_len > DMA_MAX_CHAN_BYTES) { + dev_warn(chan2dev(edmac), "too big transfer size %d\n", + sg_len); + goto fail; + } + + desc = ep93xx_dma_desc_get(edmac); + if (!desc) { + dev_warn(chan2dev(edmac), "couln't get descriptor\n"); + goto fail; + } + + if (dir == DMA_TO_DEVICE) { + desc->src_addr = sg_dma_address(sg); + desc->dst_addr = edmac->runtime_addr; + } else { + desc->src_addr = edmac->runtime_addr; + desc->dst_addr = sg_dma_address(sg); + } + desc->size = sg_len; + + if (!first) + first = desc; + else + list_add_tail(&desc->node, &first->tx_list); + } + + first->txd.cookie = -EBUSY; + first->txd.flags = flags; + + return &first->txd; + +fail: + ep93xx_dma_desc_put(edmac, first); + return NULL; +} + +/** + * ep93xx_dma_prep_dma_cyclic - prepare a cyclic DMA operation + * @chan: channel + * @dma_addr: DMA mapped address of the buffer + * @buf_len: length of the buffer (in bytes) + * @period_len: lenght of a single period + * @dir: direction of the operation + * + * Prepares a descriptor for cyclic DMA operation. This means that once the + * descriptor is submitted, we will be submitting in a @period_len sized + * buffers and calling callback once the period has been elapsed. Transfer + * terminates only when client calls dmaengine_terminate_all() for this + * channel. + * + * Returns a valid DMA descriptor or %NULL in case of failure. + */ +static struct dma_async_tx_descriptor * +ep93xx_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr, + size_t buf_len, size_t period_len, + enum dma_data_direction dir) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_desc *desc, *first; + size_t offset = 0; + + if (!edmac->edma->m2m && dir != ep93xx_dma_chan_direction(chan)) { + dev_warn(chan2dev(edmac), + "channel was configured with different direction\n"); + return NULL; + } + + if (test_and_set_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags)) { + dev_warn(chan2dev(edmac), + "channel is already used for cyclic transfers\n"); + return NULL; + } + + if (period_len > DMA_MAX_CHAN_BYTES) { + dev_warn(chan2dev(edmac), "too big period length %d\n", + period_len); + return NULL; + } + + /* Split the buffer into period size chunks */ + first = NULL; + for (offset = 0; offset < buf_len; offset += period_len) { + desc = ep93xx_dma_desc_get(edmac); + if (!desc) { + dev_warn(chan2dev(edmac), "couln't get descriptor\n"); + goto fail; + } + + if (dir == DMA_TO_DEVICE) { + desc->src_addr = dma_addr + offset; + desc->dst_addr = edmac->runtime_addr; + } else { + desc->src_addr = edmac->runtime_addr; + desc->dst_addr = dma_addr + offset; + } + + desc->size = period_len; + + if (!first) + first = desc; + else + list_add_tail(&desc->node, &first->tx_list); + } + + first->txd.cookie = -EBUSY; + + return &first->txd; + +fail: + ep93xx_dma_desc_put(edmac, first); + return NULL; +} + +/** + * ep93xx_dma_terminate_all - terminate all transactions + * @edmac: channel + * + * Stops all DMA transactions. All descriptors are put back to the + * @edmac->free_list and callbacks are _not_ called. + */ +static int ep93xx_dma_terminate_all(struct ep93xx_dma_chan *edmac) +{ + struct ep93xx_dma_desc *desc, *_d; + unsigned long flags; + LIST_HEAD(list); + + spin_lock_irqsave(&edmac->lock, flags); + /* First we disable and flush the DMA channel */ + edmac->edma->hw_shutdown(edmac); + clear_bit(EP93XX_DMA_IS_CYCLIC, &edmac->flags); + list_splice_init(&edmac->active, &list); + list_splice_init(&edmac->queue, &list); + /* + * We then re-enable the channel. This way we can continue submitting + * the descriptors by just calling ->hw_submit() again. + */ + edmac->edma->hw_setup(edmac); + spin_unlock_irqrestore(&edmac->lock, flags); + + list_for_each_entry_safe(desc, _d, &list, node) + ep93xx_dma_desc_put(edmac, desc); + + return 0; +} + +static int ep93xx_dma_slave_config(struct ep93xx_dma_chan *edmac, + struct dma_slave_config *config) +{ + enum dma_slave_buswidth width; + unsigned long flags; + u32 addr, ctrl; + + if (!edmac->edma->m2m) + return -EINVAL; + + switch (config->direction) { + case DMA_FROM_DEVICE: + width = config->src_addr_width; + addr = config->src_addr; + break; + + case DMA_TO_DEVICE: + width = config->dst_addr_width; + addr = config->dst_addr; + break; + + default: + return -EINVAL; + } + + switch (width) { + case DMA_SLAVE_BUSWIDTH_1_BYTE: + ctrl = 0; + break; + case DMA_SLAVE_BUSWIDTH_2_BYTES: + ctrl = M2M_CONTROL_PW_16; + break; + case DMA_SLAVE_BUSWIDTH_4_BYTES: + ctrl = M2M_CONTROL_PW_32; + break; + default: + return -EINVAL; + } + + spin_lock_irqsave(&edmac->lock, flags); + edmac->runtime_addr = addr; + edmac->runtime_ctrl = ctrl; + spin_unlock_irqrestore(&edmac->lock, flags); + + return 0; +} + +/** + * ep93xx_dma_control - manipulate all pending operations on a channel + * @chan: channel + * @cmd: control command to perform + * @arg: optional argument + * + * Controls the channel. Function returns %0 in case of success or negative + * error in case of failure. + */ +static int ep93xx_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, + unsigned long arg) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + struct dma_slave_config *config; + + switch (cmd) { + case DMA_TERMINATE_ALL: + return ep93xx_dma_terminate_all(edmac); + + case DMA_SLAVE_CONFIG: + config = (struct dma_slave_config *)arg; + return ep93xx_dma_slave_config(edmac, config); + + default: + break; + } + + return -ENOSYS; +} + +/** + * ep93xx_dma_tx_status - check if a transaction is completed + * @chan: channel + * @cookie: transaction specific cookie + * @state: state of the transaction is stored here if given + * + * This function can be used to query state of a given transaction. + */ +static enum dma_status ep93xx_dma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, + struct dma_tx_state *state) +{ + struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); + dma_cookie_t last_used, last_completed; + enum dma_status ret; + unsigned long flags; + + spin_lock_irqsave(&edmac->lock, flags); + last_used = chan->cookie; + last_completed = edmac->last_completed; + spin_unlock_irqrestore(&edmac->lock, flags); + + ret = dma_async_is_complete(cookie, last_completed, last_used); + dma_set_tx_state(state, last_completed, last_used, 0); + + return ret; +} + +/** + * ep93xx_dma_issue_pending - push pending transactions to the hardware + * @chan: channel + * + * When this function is called, all pending transactions are pushed to the + * hardware and executed. + */ +static void ep93xx_dma_issue_pending(struct dma_chan *chan) +{ + ep93xx_dma_advance_work(to_ep93xx_dma_chan(chan)); +} + +static int __init ep93xx_dma_probe(struct platform_device *pdev) +{ + struct ep93xx_dma_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct ep93xx_dma_engine *edma; + struct dma_device *dma_dev; + size_t edma_size; + int ret, i; + + edma_size = pdata->num_channels * sizeof(struct ep93xx_dma_chan); + edma = kzalloc(sizeof(*edma) + edma_size, GFP_KERNEL); + if (!edma) + return -ENOMEM; + + dma_dev = &edma->dma_dev; + edma->m2m = platform_get_device_id(pdev)->driver_data; + edma->num_channels = pdata->num_channels; + + INIT_LIST_HEAD(&dma_dev->channels); + for (i = 0; i < pdata->num_channels; i++) { + const struct ep93xx_dma_chan_data *cdata = &pdata->channels[i]; + struct ep93xx_dma_chan *edmac = &edma->channels[i]; + + edmac->chan.device = dma_dev; + edmac->regs = cdata->base; + edmac->irq = cdata->irq; + edmac->edma = edma; + + edmac->clk = clk_get(NULL, cdata->name); + if (IS_ERR(edmac->clk)) { + dev_warn(&pdev->dev, "failed to get clock for %s\n", + cdata->name); + continue; + } + + spin_lock_init(&edmac->lock); + INIT_LIST_HEAD(&edmac->active); + INIT_LIST_HEAD(&edmac->queue); + INIT_LIST_HEAD(&edmac->free_list); + tasklet_init(&edmac->tasklet, ep93xx_dma_tasklet, + (unsigned long)edmac); + + list_add_tail(&edmac->chan.device_node, + &dma_dev->channels); + } + + dma_cap_zero(dma_dev->cap_mask); + dma_cap_set(DMA_SLAVE, dma_dev->cap_mask); + dma_cap_set(DMA_CYCLIC, dma_dev->cap_mask); + + dma_dev->dev = &pdev->dev; + dma_dev->device_alloc_chan_resources = ep93xx_dma_alloc_chan_resources; + dma_dev->device_free_chan_resources = ep93xx_dma_free_chan_resources; + dma_dev->device_prep_slave_sg = ep93xx_dma_prep_slave_sg; + dma_dev->device_prep_dma_cyclic = ep93xx_dma_prep_dma_cyclic; + dma_dev->device_control = ep93xx_dma_control; + dma_dev->device_issue_pending = ep93xx_dma_issue_pending; + dma_dev->device_tx_status = ep93xx_dma_tx_status; + + dma_set_max_seg_size(dma_dev->dev, DMA_MAX_CHAN_BYTES); + + if (edma->m2m) { + dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask); + dma_dev->device_prep_dma_memcpy = ep93xx_dma_prep_dma_memcpy; + + edma->hw_setup = m2m_hw_setup; + edma->hw_shutdown = m2m_hw_shutdown; + edma->hw_submit = m2m_hw_submit; + edma->hw_interrupt = m2m_hw_interrupt; + } else { + dma_cap_set(DMA_PRIVATE, dma_dev->cap_mask); + + edma->hw_setup = m2p_hw_setup; + edma->hw_shutdown = m2p_hw_shutdown; + edma->hw_submit = m2p_hw_submit; + edma->hw_interrupt = m2p_hw_interrupt; + } + + ret = dma_async_device_register(dma_dev); + if (unlikely(ret)) { + for (i = 0; i < edma->num_channels; i++) { + struct ep93xx_dma_chan *edmac = &edma->channels[i]; + if (!IS_ERR_OR_NULL(edmac->clk)) + clk_put(edmac->clk); + } + kfree(edma); + } else { + dev_info(dma_dev->dev, "EP93xx M2%s DMA ready\n", + edma->m2m ? "M" : "P"); + } + + return ret; +} + +static struct platform_device_id ep93xx_dma_driver_ids[] = { + { "ep93xx-dma-m2p", 0 }, + { "ep93xx-dma-m2m", 1 }, + { }, +}; + +static struct platform_driver ep93xx_dma_driver = { + .driver = { + .name = "ep93xx-dma", + }, + .id_table = ep93xx_dma_driver_ids, +}; + +static int __init ep93xx_dma_module_init(void) +{ + return platform_driver_probe(&ep93xx_dma_driver, ep93xx_dma_probe); +} +subsys_initcall(ep93xx_dma_module_init); + +MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>"); +MODULE_DESCRIPTION("EP93xx DMA driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index de35c3a..52e2900 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -86,9 +86,6 @@ config SPI_BFIN_SPORT help Enable support for a SPI bus via the Blackfin SPORT peripheral. - This driver can also be built as a module. If so, the module - will be called spi_bfin_sport. - config SPI_AU1550 tristate "Au1550/Au12x0 SPI Controller" depends on (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL @@ -97,9 +94,6 @@ config SPI_AU1550 If you say yes to this option, support will be included for the Au1550 SPI controller (may also work with Au1200,Au1210,Au1250). - This driver can also be built as a module. If so, the module - will be called au1550_spi. - config SPI_BITBANG tristate "Utilities for Bitbanging SPI masters" help @@ -130,9 +124,6 @@ config SPI_COLDFIRE_QSPI This enables support for the Coldfire QSPI controller in master mode. - This driver can also be built as a module. If so, the module - will be called coldfire_qspi. - config SPI_DAVINCI tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller" depends on SPI_MASTER && ARCH_DAVINCI @@ -140,9 +131,6 @@ config SPI_DAVINCI help SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules. - This driver can also be built as a module. The module will be called - davinci_spi. - config SPI_EP93XX tristate "Cirrus Logic EP93xx SPI controller" depends on ARCH_EP93XX @@ -150,9 +138,6 @@ config SPI_EP93XX This enables using the Cirrus EP93xx SPI controller in master mode. - To compile this driver as a module, choose M here. The module will be - called ep93xx_spi. - config SPI_GPIO tristate "GPIO-based bitbanging SPI Master" depends on GENERIC_GPIO @@ -169,21 +154,6 @@ config SPI_GPIO GPIO operations, you should be able to leverage that for better speed with a custom version of this driver; see the source code. -config SPI_IMX_VER_IMX1 - def_bool y if SOC_IMX1 - -config SPI_IMX_VER_0_0 - def_bool y if SOC_IMX21 || SOC_IMX27 - -config SPI_IMX_VER_0_4 - def_bool y if SOC_IMX31 - -config SPI_IMX_VER_0_7 - def_bool y if ARCH_MX25 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53 - -config SPI_IMX_VER_2_3 - def_bool y if SOC_IMX51 || SOC_IMX53 - config SPI_IMX tristate "Freescale i.MX SPI controllers" depends on ARCH_MXC @@ -328,16 +298,6 @@ config SPI_S3C24XX_FIQ no free DMA channels, or when doing transfers that required both TX and RX data paths. -config SPI_S3C24XX_GPIO - tristate "Samsung S3C24XX series SPI by GPIO" - depends on ARCH_S3C2410 && EXPERIMENTAL - select SPI_BITBANG - help - SPI driver for Samsung S3C24XX series ARM SoCs using - GPIO lines to provide the SPI bus. This can be used where - the inbuilt hardware cannot provide the transfer mode, or - where the board is using non hardware connected pins. - config SPI_S3C64XX tristate "Samsung S3C64XX series type SPI" depends on (ARCH_S3C64XX || ARCH_S5P64X0) @@ -385,16 +345,16 @@ config SPI_TI_SSP This selects an SPI master implementation using a TI sequencer serial port. - To compile this driver as a module, choose M here: the - module will be called ti-ssp-spi. - config SPI_TOPCLIFF_PCH - tristate "Topcliff PCH SPI Controller" + tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH SPI controller" depends on PCI help SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus used in some x86 embedded processors. + This driver also supports the ML7213, a companion chip for the + Atom E6xx series and compatible with the Intel EG20T PCH. + config SPI_TXX9 tristate "Toshiba TXx9 SPI controller" depends on GENERIC_GPIO && CPU_TX49XX diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 0f8c69b..61c3261 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -7,68 +7,55 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG # small core, mostly translating board-specific # config declarations into driver model code obj-$(CONFIG_SPI_MASTER) += spi.o +obj-$(CONFIG_SPI_SPIDEV) += spidev.o # SPI master controller drivers (bus) -obj-$(CONFIG_SPI_ALTERA) += spi_altera.o -obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o -obj-$(CONFIG_SPI_ATH79) += ath79_spi.o -obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o -obj-$(CONFIG_SPI_BFIN_SPORT) += spi_bfin_sport.o -obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o -obj-$(CONFIG_SPI_AU1550) += au1550_spi.o -obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o -obj-$(CONFIG_SPI_COLDFIRE_QSPI) += coldfire_qspi.o -obj-$(CONFIG_SPI_DAVINCI) += davinci_spi.o -obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o -obj-$(CONFIG_SPI_DW_PCI) += dw_spi_midpci.o -dw_spi_midpci-objs := dw_spi_pci.o dw_spi_mid.o -obj-$(CONFIG_SPI_DW_MMIO) += dw_spi_mmio.o -obj-$(CONFIG_SPI_EP93XX) += ep93xx_spi.o -obj-$(CONFIG_SPI_GPIO) += spi_gpio.o -obj-$(CONFIG_SPI_IMX) += spi_imx.o -obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o -obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o -obj-$(CONFIG_SPI_PXA2XX_PCI) += pxa2xx_spi_pci.o -obj-$(CONFIG_SPI_OC_TINY) += spi_oc_tiny.o -obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o -obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o -obj-$(CONFIG_SPI_OMAP_100K) += omap_spi_100k.o -obj-$(CONFIG_SPI_ORION) += orion_spi.o -obj-$(CONFIG_SPI_PL022) += amba-pl022.o -obj-$(CONFIG_SPI_MPC512x_PSC) += mpc512x_psc_spi.o -obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o -obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o -obj-$(CONFIG_SPI_FSL_LIB) += spi_fsl_lib.o -obj-$(CONFIG_SPI_FSL_ESPI) += spi_fsl_espi.o -obj-$(CONFIG_SPI_FSL_SPI) += spi_fsl_spi.o -obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o -obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o -obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o -obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o -obj-$(CONFIG_SPI_TEGRA) += spi_tegra.o -obj-$(CONFIG_SPI_TI_SSP) += ti-ssp-spi.o -obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi_topcliff_pch.o -obj-$(CONFIG_SPI_TXX9) += spi_txx9.o -obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o -obj-$(CONFIG_SPI_SH) += spi_sh.o -obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o -obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o -obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o -obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o +obj-$(CONFIG_SPI_ALTERA) += spi-altera.o +obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o +obj-$(CONFIG_SPI_ATH79) += spi-ath79.o +obj-$(CONFIG_SPI_AU1550) += spi-au1550.o +obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o +obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o +obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o +obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o +obj-$(CONFIG_SPI_COLDFIRE_QSPI) += spi-coldfire-qspi.o +obj-$(CONFIG_SPI_DAVINCI) += spi-davinci.o +obj-$(CONFIG_SPI_DESIGNWARE) += spi-dw.o +obj-$(CONFIG_SPI_DW_MMIO) += spi-dw-mmio.o +obj-$(CONFIG_SPI_DW_PCI) += spi-dw-midpci.o +spi-dw-midpci-objs := spi-dw-pci.o spi-dw-mid.o +obj-$(CONFIG_SPI_EP93XX) += spi-ep93xx.o +obj-$(CONFIG_SPI_FSL_LIB) += spi-fsl-lib.o +obj-$(CONFIG_SPI_FSL_ESPI) += spi-fsl-espi.o +obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o +obj-$(CONFIG_SPI_GPIO) += spi-gpio.o +obj-$(CONFIG_SPI_IMX) += spi-imx.o +obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o +obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o +obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o +obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o +obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o +obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o +obj-$(CONFIG_SPI_OMAP_UWIRE) += spi-omap-uwire.o +obj-$(CONFIG_SPI_OMAP_100K) += spi-omap-100k.o +obj-$(CONFIG_SPI_OMAP24XX) += spi-omap2-mcspi.o +obj-$(CONFIG_SPI_ORION) += spi-orion.o +obj-$(CONFIG_SPI_PL022) += spi-pl022.o +obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o +obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o +obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o +obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o +spi-s3c24xx-hw-y := spi-s3c24xx.o +spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o +obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o +obj-$(CONFIG_SPI_SH) += spi-sh.o +obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o +obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o +obj-$(CONFIG_SPI_STMP3XXX) += spi-stmp.o +obj-$(CONFIG_SPI_TEGRA) += spi-tegra.o +obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp.o +obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o +obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o +obj-$(CONFIG_SPI_TXX9) += spi-txx9.o +obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o -# special build for s3c24xx spi driver with fiq support -spi_s3c24xx_hw-y := spi_s3c24xx.o -spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi_s3c24xx_fiq.o - -# ... add above this line ... - -# SPI protocol drivers (device/link on bus) -obj-$(CONFIG_SPI_SPIDEV) += spidev.o -obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o -# ... add above this line ... - -# SPI slave controller drivers (upstream link) -# ... add above this line ... - -# SPI slave drivers (protocol for that link) -# ... add above this line ... diff --git a/drivers/spi/atmel_spi.h b/drivers/spi/atmel_spi.h deleted file mode 100644 index 6e06b6a..0000000 --- a/drivers/spi/atmel_spi.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Register definitions for Atmel Serial Peripheral Interface (SPI) - * - * Copyright (C) 2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ATMEL_SPI_H__ -#define __ATMEL_SPI_H__ - -/* SPI register offsets */ -#define SPI_CR 0x0000 -#define SPI_MR 0x0004 -#define SPI_RDR 0x0008 -#define SPI_TDR 0x000c -#define SPI_SR 0x0010 -#define SPI_IER 0x0014 -#define SPI_IDR 0x0018 -#define SPI_IMR 0x001c -#define SPI_CSR0 0x0030 -#define SPI_CSR1 0x0034 -#define SPI_CSR2 0x0038 -#define SPI_CSR3 0x003c -#define SPI_RPR 0x0100 -#define SPI_RCR 0x0104 -#define SPI_TPR 0x0108 -#define SPI_TCR 0x010c -#define SPI_RNPR 0x0110 -#define SPI_RNCR 0x0114 -#define SPI_TNPR 0x0118 -#define SPI_TNCR 0x011c -#define SPI_PTCR 0x0120 -#define SPI_PTSR 0x0124 - -/* Bitfields in CR */ -#define SPI_SPIEN_OFFSET 0 -#define SPI_SPIEN_SIZE 1 -#define SPI_SPIDIS_OFFSET 1 -#define SPI_SPIDIS_SIZE 1 -#define SPI_SWRST_OFFSET 7 -#define SPI_SWRST_SIZE 1 -#define SPI_LASTXFER_OFFSET 24 -#define SPI_LASTXFER_SIZE 1 - -/* Bitfields in MR */ -#define SPI_MSTR_OFFSET 0 -#define SPI_MSTR_SIZE 1 -#define SPI_PS_OFFSET 1 -#define SPI_PS_SIZE 1 -#define SPI_PCSDEC_OFFSET 2 -#define SPI_PCSDEC_SIZE 1 -#define SPI_FDIV_OFFSET 3 -#define SPI_FDIV_SIZE 1 -#define SPI_MODFDIS_OFFSET 4 -#define SPI_MODFDIS_SIZE 1 -#define SPI_LLB_OFFSET 7 -#define SPI_LLB_SIZE 1 -#define SPI_PCS_OFFSET 16 -#define SPI_PCS_SIZE 4 -#define SPI_DLYBCS_OFFSET 24 -#define SPI_DLYBCS_SIZE 8 - -/* Bitfields in RDR */ -#define SPI_RD_OFFSET 0 -#define SPI_RD_SIZE 16 - -/* Bitfields in TDR */ -#define SPI_TD_OFFSET 0 -#define SPI_TD_SIZE 16 - -/* Bitfields in SR */ -#define SPI_RDRF_OFFSET 0 -#define SPI_RDRF_SIZE 1 -#define SPI_TDRE_OFFSET 1 -#define SPI_TDRE_SIZE 1 -#define SPI_MODF_OFFSET 2 -#define SPI_MODF_SIZE 1 -#define SPI_OVRES_OFFSET 3 -#define SPI_OVRES_SIZE 1 -#define SPI_ENDRX_OFFSET 4 -#define SPI_ENDRX_SIZE 1 -#define SPI_ENDTX_OFFSET 5 -#define SPI_ENDTX_SIZE 1 -#define SPI_RXBUFF_OFFSET 6 -#define SPI_RXBUFF_SIZE 1 -#define SPI_TXBUFE_OFFSET 7 -#define SPI_TXBUFE_SIZE 1 -#define SPI_NSSR_OFFSET 8 -#define SPI_NSSR_SIZE 1 -#define SPI_TXEMPTY_OFFSET 9 -#define SPI_TXEMPTY_SIZE 1 -#define SPI_SPIENS_OFFSET 16 -#define SPI_SPIENS_SIZE 1 - -/* Bitfields in CSR0 */ -#define SPI_CPOL_OFFSET 0 -#define SPI_CPOL_SIZE 1 -#define SPI_NCPHA_OFFSET 1 -#define SPI_NCPHA_SIZE 1 -#define SPI_CSAAT_OFFSET 3 -#define SPI_CSAAT_SIZE 1 -#define SPI_BITS_OFFSET 4 -#define SPI_BITS_SIZE 4 -#define SPI_SCBR_OFFSET 8 -#define SPI_SCBR_SIZE 8 -#define SPI_DLYBS_OFFSET 16 -#define SPI_DLYBS_SIZE 8 -#define SPI_DLYBCT_OFFSET 24 -#define SPI_DLYBCT_SIZE 8 - -/* Bitfields in RCR */ -#define SPI_RXCTR_OFFSET 0 -#define SPI_RXCTR_SIZE 16 - -/* Bitfields in TCR */ -#define SPI_TXCTR_OFFSET 0 -#define SPI_TXCTR_SIZE 16 - -/* Bitfields in RNCR */ -#define SPI_RXNCR_OFFSET 0 -#define SPI_RXNCR_SIZE 16 - -/* Bitfields in TNCR */ -#define SPI_TXNCR_OFFSET 0 -#define SPI_TXNCR_SIZE 16 - -/* Bitfields in PTCR */ -#define SPI_RXTEN_OFFSET 0 -#define SPI_RXTEN_SIZE 1 -#define SPI_RXTDIS_OFFSET 1 -#define SPI_RXTDIS_SIZE 1 -#define SPI_TXTEN_OFFSET 8 -#define SPI_TXTEN_SIZE 1 -#define SPI_TXTDIS_OFFSET 9 -#define SPI_TXTDIS_SIZE 1 - -/* Constants for BITS */ -#define SPI_BITS_8_BPT 0 -#define SPI_BITS_9_BPT 1 -#define SPI_BITS_10_BPT 2 -#define SPI_BITS_11_BPT 3 -#define SPI_BITS_12_BPT 4 -#define SPI_BITS_13_BPT 5 -#define SPI_BITS_14_BPT 6 -#define SPI_BITS_15_BPT 7 -#define SPI_BITS_16_BPT 8 - -/* Bit manipulation macros */ -#define SPI_BIT(name) \ - (1 << SPI_##name##_OFFSET) -#define SPI_BF(name,value) \ - (((value) & ((1 << SPI_##name##_SIZE) - 1)) << SPI_##name##_OFFSET) -#define SPI_BFEXT(name,value) \ - (((value) >> SPI_##name##_OFFSET) & ((1 << SPI_##name##_SIZE) - 1)) -#define SPI_BFINS(name,value,old) \ - ( ((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \ - | SPI_BF(name,value)) - -/* Register access macros */ -#define spi_readl(port,reg) \ - __raw_readl((port)->regs + SPI_##reg) -#define spi_writel(port,reg,value) \ - __raw_writel((value), (port)->regs + SPI_##reg) - -#endif /* __ATMEL_SPI_H__ */ diff --git a/drivers/spi/spi_altera.c b/drivers/spi/spi-altera.c index 4813a63..4813a63 100644 --- a/drivers/spi/spi_altera.c +++ b/drivers/spi/spi-altera.c diff --git a/drivers/spi/ath79_spi.c b/drivers/spi/spi-ath79.c index fcff810..03019bf 100644 --- a/drivers/spi/ath79_spi.c +++ b/drivers/spi/spi-ath79.c @@ -232,7 +232,7 @@ static __devinit int ath79_spi_probe(struct platform_device *pdev) goto err_put_master; } - sp->base = ioremap(r->start, r->end - r->start + 1); + sp->base = ioremap(r->start, resource_size(r)); if (!sp->base) { ret = -ENXIO; goto err_put_master; diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/spi-atmel.c index 08711e9..82dee9a 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/spi-atmel.c @@ -25,7 +25,160 @@ #include <mach/gpio.h> #include <mach/cpu.h> -#include "atmel_spi.h" +/* SPI register offsets */ +#define SPI_CR 0x0000 +#define SPI_MR 0x0004 +#define SPI_RDR 0x0008 +#define SPI_TDR 0x000c +#define SPI_SR 0x0010 +#define SPI_IER 0x0014 +#define SPI_IDR 0x0018 +#define SPI_IMR 0x001c +#define SPI_CSR0 0x0030 +#define SPI_CSR1 0x0034 +#define SPI_CSR2 0x0038 +#define SPI_CSR3 0x003c +#define SPI_RPR 0x0100 +#define SPI_RCR 0x0104 +#define SPI_TPR 0x0108 +#define SPI_TCR 0x010c +#define SPI_RNPR 0x0110 +#define SPI_RNCR 0x0114 +#define SPI_TNPR 0x0118 +#define SPI_TNCR 0x011c +#define SPI_PTCR 0x0120 +#define SPI_PTSR 0x0124 + +/* Bitfields in CR */ +#define SPI_SPIEN_OFFSET 0 +#define SPI_SPIEN_SIZE 1 +#define SPI_SPIDIS_OFFSET 1 +#define SPI_SPIDIS_SIZE 1 +#define SPI_SWRST_OFFSET 7 +#define SPI_SWRST_SIZE 1 +#define SPI_LASTXFER_OFFSET 24 +#define SPI_LASTXFER_SIZE 1 + +/* Bitfields in MR */ +#define SPI_MSTR_OFFSET 0 +#define SPI_MSTR_SIZE 1 +#define SPI_PS_OFFSET 1 +#define SPI_PS_SIZE 1 +#define SPI_PCSDEC_OFFSET 2 +#define SPI_PCSDEC_SIZE 1 +#define SPI_FDIV_OFFSET 3 +#define SPI_FDIV_SIZE 1 +#define SPI_MODFDIS_OFFSET 4 +#define SPI_MODFDIS_SIZE 1 +#define SPI_LLB_OFFSET 7 +#define SPI_LLB_SIZE 1 +#define SPI_PCS_OFFSET 16 +#define SPI_PCS_SIZE 4 +#define SPI_DLYBCS_OFFSET 24 +#define SPI_DLYBCS_SIZE 8 + +/* Bitfields in RDR */ +#define SPI_RD_OFFSET 0 +#define SPI_RD_SIZE 16 + +/* Bitfields in TDR */ +#define SPI_TD_OFFSET 0 +#define SPI_TD_SIZE 16 + +/* Bitfields in SR */ +#define SPI_RDRF_OFFSET 0 +#define SPI_RDRF_SIZE 1 +#define SPI_TDRE_OFFSET 1 +#define SPI_TDRE_SIZE 1 +#define SPI_MODF_OFFSET 2 +#define SPI_MODF_SIZE 1 +#define SPI_OVRES_OFFSET 3 +#define SPI_OVRES_SIZE 1 +#define SPI_ENDRX_OFFSET 4 +#define SPI_ENDRX_SIZE 1 +#define SPI_ENDTX_OFFSET 5 +#define SPI_ENDTX_SIZE 1 +#define SPI_RXBUFF_OFFSET 6 +#define SPI_RXBUFF_SIZE 1 +#define SPI_TXBUFE_OFFSET 7 +#define SPI_TXBUFE_SIZE 1 +#define SPI_NSSR_OFFSET 8 +#define SPI_NSSR_SIZE 1 +#define SPI_TXEMPTY_OFFSET 9 +#define SPI_TXEMPTY_SIZE 1 +#define SPI_SPIENS_OFFSET 16 +#define SPI_SPIENS_SIZE 1 + +/* Bitfields in CSR0 */ +#define SPI_CPOL_OFFSET 0 +#define SPI_CPOL_SIZE 1 +#define SPI_NCPHA_OFFSET 1 +#define SPI_NCPHA_SIZE 1 +#define SPI_CSAAT_OFFSET 3 +#define SPI_CSAAT_SIZE 1 +#define SPI_BITS_OFFSET 4 +#define SPI_BITS_SIZE 4 +#define SPI_SCBR_OFFSET 8 +#define SPI_SCBR_SIZE 8 +#define SPI_DLYBS_OFFSET 16 +#define SPI_DLYBS_SIZE 8 +#define SPI_DLYBCT_OFFSET 24 +#define SPI_DLYBCT_SIZE 8 + +/* Bitfields in RCR */ +#define SPI_RXCTR_OFFSET 0 +#define SPI_RXCTR_SIZE 16 + +/* Bitfields in TCR */ +#define SPI_TXCTR_OFFSET 0 +#define SPI_TXCTR_SIZE 16 + +/* Bitfields in RNCR */ +#define SPI_RXNCR_OFFSET 0 +#define SPI_RXNCR_SIZE 16 + +/* Bitfields in TNCR */ +#define SPI_TXNCR_OFFSET 0 +#define SPI_TXNCR_SIZE 16 + +/* Bitfields in PTCR */ +#define SPI_RXTEN_OFFSET 0 +#define SPI_RXTEN_SIZE 1 +#define SPI_RXTDIS_OFFSET 1 +#define SPI_RXTDIS_SIZE 1 +#define SPI_TXTEN_OFFSET 8 +#define SPI_TXTEN_SIZE 1 +#define SPI_TXTDIS_OFFSET 9 +#define SPI_TXTDIS_SIZE 1 + +/* Constants for BITS */ +#define SPI_BITS_8_BPT 0 +#define SPI_BITS_9_BPT 1 +#define SPI_BITS_10_BPT 2 +#define SPI_BITS_11_BPT 3 +#define SPI_BITS_12_BPT 4 +#define SPI_BITS_13_BPT 5 +#define SPI_BITS_14_BPT 6 +#define SPI_BITS_15_BPT 7 +#define SPI_BITS_16_BPT 8 + +/* Bit manipulation macros */ +#define SPI_BIT(name) \ + (1 << SPI_##name##_OFFSET) +#define SPI_BF(name,value) \ + (((value) & ((1 << SPI_##name##_SIZE) - 1)) << SPI_##name##_OFFSET) +#define SPI_BFEXT(name,value) \ + (((value) >> SPI_##name##_OFFSET) & ((1 << SPI_##name##_SIZE) - 1)) +#define SPI_BFINS(name,value,old) \ + ( ((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \ + | SPI_BF(name,value)) + +/* Register access macros */ +#define spi_readl(port,reg) \ + __raw_readl((port)->regs + SPI_##reg) +#define spi_writel(port,reg,value) \ + __raw_writel((value), (port)->regs + SPI_##reg) + /* * The core SPI transfer engine just talks to a register bank to set up diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/spi-au1550.c index b50563d..bddee5f5 100644 --- a/drivers/spi/au1550_spi.c +++ b/drivers/spi/spi-au1550.c @@ -1,5 +1,5 @@ /* - * au1550_spi.c - au1550 psc spi controller driver + * au1550 psc spi controller driver * may work also with au1200, au1210, au1250 * will not work on au1000, au1100 and au1500 (no full spi controller there) * diff --git a/drivers/spi/spi_bfin_sport.c b/drivers/spi/spi-bfin-sport.c index e557ff6..e557ff6 100644 --- a/drivers/spi/spi_bfin_sport.c +++ b/drivers/spi/spi-bfin-sport.c diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi-bfin5xx.c index cc880c9..b8d25f2 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -58,7 +58,7 @@ struct bfin_spi_master_data { struct spi_master *master; /* Regs base of SPI controller */ - void __iomem *regs_base; + struct bfin_spi_regs __iomem *regs; /* Pin request list */ u16 *pin_req; @@ -122,34 +122,14 @@ struct bfin_spi_slave_data { const struct bfin_spi_transfer_ops *ops; }; -#define DEFINE_SPI_REG(reg, off) \ -static inline u16 read_##reg(struct bfin_spi_master_data *drv_data) \ - { return bfin_read16(drv_data->regs_base + off); } \ -static inline void write_##reg(struct bfin_spi_master_data *drv_data, u16 v) \ - { bfin_write16(drv_data->regs_base + off, v); } - -DEFINE_SPI_REG(CTRL, 0x00) -DEFINE_SPI_REG(FLAG, 0x04) -DEFINE_SPI_REG(STAT, 0x08) -DEFINE_SPI_REG(TDBR, 0x0C) -DEFINE_SPI_REG(RDBR, 0x10) -DEFINE_SPI_REG(BAUD, 0x14) -DEFINE_SPI_REG(SHAW, 0x18) - static void bfin_spi_enable(struct bfin_spi_master_data *drv_data) { - u16 cr; - - cr = read_CTRL(drv_data); - write_CTRL(drv_data, (cr | BIT_CTL_ENABLE)); + bfin_write_or(&drv_data->regs->ctl, BIT_CTL_ENABLE); } static void bfin_spi_disable(struct bfin_spi_master_data *drv_data) { - u16 cr; - - cr = read_CTRL(drv_data); - write_CTRL(drv_data, (cr & (~BIT_CTL_ENABLE))); + bfin_write_and(&drv_data->regs->ctl, ~BIT_CTL_ENABLE); } /* Caculate the SPI_BAUD register value based on input HZ */ @@ -172,10 +152,10 @@ static int bfin_spi_flush(struct bfin_spi_master_data *drv_data) unsigned long limit = loops_per_jiffy << 1; /* wait for stop and clear stat */ - while (!(read_STAT(drv_data) & BIT_STAT_SPIF) && --limit) + while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_SPIF) && --limit) cpu_relax(); - write_STAT(drv_data, BIT_STAT_CLR); + bfin_write(&drv_data->regs->stat, BIT_STAT_CLR); return limit; } @@ -183,29 +163,19 @@ static int bfin_spi_flush(struct bfin_spi_master_data *drv_data) /* Chip select operation functions for cs_change flag */ static void bfin_spi_cs_active(struct bfin_spi_master_data *drv_data, struct bfin_spi_slave_data *chip) { - if (likely(chip->chip_select_num < MAX_CTRL_CS)) { - u16 flag = read_FLAG(drv_data); - - flag &= ~chip->flag; - - write_FLAG(drv_data, flag); - } else { + if (likely(chip->chip_select_num < MAX_CTRL_CS)) + bfin_write_and(&drv_data->regs->flg, ~chip->flag); + else gpio_set_value(chip->cs_gpio, 0); - } } static void bfin_spi_cs_deactive(struct bfin_spi_master_data *drv_data, struct bfin_spi_slave_data *chip) { - if (likely(chip->chip_select_num < MAX_CTRL_CS)) { - u16 flag = read_FLAG(drv_data); - - flag |= chip->flag; - - write_FLAG(drv_data, flag); - } else { + if (likely(chip->chip_select_num < MAX_CTRL_CS)) + bfin_write_or(&drv_data->regs->flg, chip->flag); + else gpio_set_value(chip->cs_gpio, 1); - } /* Move delay here for consistency */ if (chip->cs_chg_udelay) @@ -216,25 +186,15 @@ static void bfin_spi_cs_deactive(struct bfin_spi_master_data *drv_data, static inline void bfin_spi_cs_enable(struct bfin_spi_master_data *drv_data, struct bfin_spi_slave_data *chip) { - if (chip->chip_select_num < MAX_CTRL_CS) { - u16 flag = read_FLAG(drv_data); - - flag |= (chip->flag >> 8); - - write_FLAG(drv_data, flag); - } + if (chip->chip_select_num < MAX_CTRL_CS) + bfin_write_or(&drv_data->regs->flg, chip->flag >> 8); } static inline void bfin_spi_cs_disable(struct bfin_spi_master_data *drv_data, struct bfin_spi_slave_data *chip) { - if (chip->chip_select_num < MAX_CTRL_CS) { - u16 flag = read_FLAG(drv_data); - - flag &= ~(chip->flag >> 8); - - write_FLAG(drv_data, flag); - } + if (chip->chip_select_num < MAX_CTRL_CS) + bfin_write_and(&drv_data->regs->flg, ~(chip->flag >> 8)); } /* stop controller and re-config current chip*/ @@ -243,15 +203,15 @@ static void bfin_spi_restore_state(struct bfin_spi_master_data *drv_data) struct bfin_spi_slave_data *chip = drv_data->cur_chip; /* Clear status and disable clock */ - write_STAT(drv_data, BIT_STAT_CLR); + bfin_write(&drv_data->regs->stat, BIT_STAT_CLR); bfin_spi_disable(drv_data); dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n"); SSYNC(); /* Load the registers */ - write_CTRL(drv_data, chip->ctl_reg); - write_BAUD(drv_data, chip->baud); + bfin_write(&drv_data->regs->ctl, chip->ctl_reg); + bfin_write(&drv_data->regs->baud, chip->baud); bfin_spi_enable(drv_data); bfin_spi_cs_active(drv_data, chip); @@ -260,7 +220,7 @@ static void bfin_spi_restore_state(struct bfin_spi_master_data *drv_data) /* used to kick off transfer in rx mode and read unwanted RX data */ static inline void bfin_spi_dummy_read(struct bfin_spi_master_data *drv_data) { - (void) read_RDBR(drv_data); + (void) bfin_read(&drv_data->regs->rdbr); } static void bfin_spi_u8_writer(struct bfin_spi_master_data *drv_data) @@ -269,10 +229,10 @@ static void bfin_spi_u8_writer(struct bfin_spi_master_data *drv_data) bfin_spi_dummy_read(drv_data); while (drv_data->tx < drv_data->tx_end) { - write_TDBR(drv_data, (*(u8 *) (drv_data->tx++))); + bfin_write(&drv_data->regs->tdbr, (*(u8 *) (drv_data->tx++))); /* wait until transfer finished. checking SPIF or TXS may not guarantee transfer completion */ - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS)) cpu_relax(); /* discard RX data and clear RXS */ bfin_spi_dummy_read(drv_data); @@ -287,10 +247,10 @@ static void bfin_spi_u8_reader(struct bfin_spi_master_data *drv_data) bfin_spi_dummy_read(drv_data); while (drv_data->rx < drv_data->rx_end) { - write_TDBR(drv_data, tx_val); - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + bfin_write(&drv_data->regs->tdbr, tx_val); + while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS)) cpu_relax(); - *(u8 *) (drv_data->rx++) = read_RDBR(drv_data); + *(u8 *) (drv_data->rx++) = bfin_read(&drv_data->regs->rdbr); } } @@ -300,10 +260,10 @@ static void bfin_spi_u8_duplex(struct bfin_spi_master_data *drv_data) bfin_spi_dummy_read(drv_data); while (drv_data->rx < drv_data->rx_end) { - write_TDBR(drv_data, (*(u8 *) (drv_data->tx++))); - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + bfin_write(&drv_data->regs->tdbr, (*(u8 *) (drv_data->tx++))); + while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS)) cpu_relax(); - *(u8 *) (drv_data->rx++) = read_RDBR(drv_data); + *(u8 *) (drv_data->rx++) = bfin_read(&drv_data->regs->rdbr); } } @@ -319,11 +279,11 @@ static void bfin_spi_u16_writer(struct bfin_spi_master_data *drv_data) bfin_spi_dummy_read(drv_data); while (drv_data->tx < drv_data->tx_end) { - write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); + bfin_write(&drv_data->regs->tdbr, (*(u16 *) (drv_data->tx))); drv_data->tx += 2; /* wait until transfer finished. checking SPIF or TXS may not guarantee transfer completion */ - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS)) cpu_relax(); /* discard RX data and clear RXS */ bfin_spi_dummy_read(drv_data); @@ -338,10 +298,10 @@ static void bfin_spi_u16_reader(struct bfin_spi_master_data *drv_data) bfin_spi_dummy_read(drv_data); while (drv_data->rx < drv_data->rx_end) { - write_TDBR(drv_data, tx_val); - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + bfin_write(&drv_data->regs->tdbr, tx_val); + while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS)) cpu_relax(); - *(u16 *) (drv_data->rx) = read_RDBR(drv_data); + *(u16 *) (drv_data->rx) = bfin_read(&drv_data->regs->rdbr); drv_data->rx += 2; } } @@ -352,11 +312,11 @@ static void bfin_spi_u16_duplex(struct bfin_spi_master_data *drv_data) bfin_spi_dummy_read(drv_data); while (drv_data->rx < drv_data->rx_end) { - write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); + bfin_write(&drv_data->regs->tdbr, (*(u16 *) (drv_data->tx))); drv_data->tx += 2; - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS)) cpu_relax(); - *(u16 *) (drv_data->rx) = read_RDBR(drv_data); + *(u16 *) (drv_data->rx) = bfin_read(&drv_data->regs->rdbr); drv_data->rx += 2; } } @@ -428,7 +388,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) int loop = 0; /* wait until transfer finished. */ - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_RXS)) cpu_relax(); if ((drv_data->tx && drv_data->tx >= drv_data->tx_end) || @@ -439,11 +399,11 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) if (n_bytes % 2) { u16 *buf = (u16 *)drv_data->rx; for (loop = 0; loop < n_bytes / 2; loop++) - *buf++ = read_RDBR(drv_data); + *buf++ = bfin_read(&drv_data->regs->rdbr); } else { u8 *buf = (u8 *)drv_data->rx; for (loop = 0; loop < n_bytes; loop++) - *buf++ = read_RDBR(drv_data); + *buf++ = bfin_read(&drv_data->regs->rdbr); } drv_data->rx += n_bytes; } @@ -468,15 +428,15 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) u16 *buf = (u16 *)drv_data->rx; u16 *buf2 = (u16 *)drv_data->tx; for (loop = 0; loop < n_bytes / 2; loop++) { - *buf++ = read_RDBR(drv_data); - write_TDBR(drv_data, *buf2++); + *buf++ = bfin_read(&drv_data->regs->rdbr); + bfin_write(&drv_data->regs->tdbr, *buf2++); } } else { u8 *buf = (u8 *)drv_data->rx; u8 *buf2 = (u8 *)drv_data->tx; for (loop = 0; loop < n_bytes; loop++) { - *buf++ = read_RDBR(drv_data); - write_TDBR(drv_data, *buf2++); + *buf++ = bfin_read(&drv_data->regs->rdbr); + bfin_write(&drv_data->regs->tdbr, *buf2++); } } } else if (drv_data->rx) { @@ -485,14 +445,14 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) if (n_bytes % 2) { u16 *buf = (u16 *)drv_data->rx; for (loop = 0; loop < n_bytes / 2; loop++) { - *buf++ = read_RDBR(drv_data); - write_TDBR(drv_data, chip->idle_tx_val); + *buf++ = bfin_read(&drv_data->regs->rdbr); + bfin_write(&drv_data->regs->tdbr, chip->idle_tx_val); } } else { u8 *buf = (u8 *)drv_data->rx; for (loop = 0; loop < n_bytes; loop++) { - *buf++ = read_RDBR(drv_data); - write_TDBR(drv_data, chip->idle_tx_val); + *buf++ = bfin_read(&drv_data->regs->rdbr); + bfin_write(&drv_data->regs->tdbr, chip->idle_tx_val); } } } else if (drv_data->tx) { @@ -501,14 +461,14 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) if (n_bytes % 2) { u16 *buf = (u16 *)drv_data->tx; for (loop = 0; loop < n_bytes / 2; loop++) { - read_RDBR(drv_data); - write_TDBR(drv_data, *buf++); + bfin_read(&drv_data->regs->rdbr); + bfin_write(&drv_data->regs->tdbr, *buf++); } } else { u8 *buf = (u8 *)drv_data->tx; for (loop = 0; loop < n_bytes; loop++) { - read_RDBR(drv_data); - write_TDBR(drv_data, *buf++); + bfin_read(&drv_data->regs->rdbr); + bfin_write(&drv_data->regs->tdbr, *buf++); } } } @@ -528,19 +488,19 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) struct spi_message *msg = drv_data->cur_msg; unsigned long timeout; unsigned short dmastat = get_dma_curr_irqstat(drv_data->dma_channel); - u16 spistat = read_STAT(drv_data); + u16 spistat = bfin_read(&drv_data->regs->stat); dev_dbg(&drv_data->pdev->dev, "in dma_irq_handler dmastat:0x%x spistat:0x%x\n", dmastat, spistat); if (drv_data->rx != NULL) { - u16 cr = read_CTRL(drv_data); + u16 cr = bfin_read(&drv_data->regs->ctl); /* discard old RX data and clear RXS */ bfin_spi_dummy_read(drv_data); - write_CTRL(drv_data, cr & ~BIT_CTL_ENABLE); /* Disable SPI */ - write_CTRL(drv_data, cr & ~BIT_CTL_TIMOD); /* Restore State */ - write_STAT(drv_data, BIT_STAT_CLR); /* Clear Status */ + bfin_write(&drv_data->regs->ctl, cr & ~BIT_CTL_ENABLE); /* Disable SPI */ + bfin_write(&drv_data->regs->ctl, cr & ~BIT_CTL_TIMOD); /* Restore State */ + bfin_write(&drv_data->regs->stat, BIT_STAT_CLR); /* Clear Status */ } clear_dma_irqstat(drv_data->dma_channel); @@ -552,17 +512,17 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) * register until it goes low for 2 successive reads */ if (drv_data->tx != NULL) { - while ((read_STAT(drv_data) & BIT_STAT_TXS) || - (read_STAT(drv_data) & BIT_STAT_TXS)) + while ((bfin_read(&drv_data->regs->stat) & BIT_STAT_TXS) || + (bfin_read(&drv_data->regs->stat) & BIT_STAT_TXS)) cpu_relax(); } dev_dbg(&drv_data->pdev->dev, "in dma_irq_handler dmastat:0x%x spistat:0x%x\n", - dmastat, read_STAT(drv_data)); + dmastat, bfin_read(&drv_data->regs->stat)); timeout = jiffies + HZ; - while (!(read_STAT(drv_data) & BIT_STAT_SPIF)) + while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_SPIF)) if (!time_before(jiffies, timeout)) { dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF"); break; @@ -699,9 +659,9 @@ static void bfin_spi_pump_transfers(unsigned long data) bfin_spi_giveback(drv_data); return; } - cr = read_CTRL(drv_data) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE); + cr = bfin_read(&drv_data->regs->ctl) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE); cr |= cr_width; - write_CTRL(drv_data, cr); + bfin_write(&drv_data->regs->ctl, cr); dev_dbg(&drv_data->pdev->dev, "transfer: drv_data->ops is %p, chip->ops is %p, u8_ops is %p\n", @@ -712,11 +672,11 @@ static void bfin_spi_pump_transfers(unsigned long data) /* Speed setup (surely valid because already checked) */ if (transfer->speed_hz) - write_BAUD(drv_data, hz_to_spi_baud(transfer->speed_hz)); + bfin_write(&drv_data->regs->baud, hz_to_spi_baud(transfer->speed_hz)); else - write_BAUD(drv_data, chip->baud); + bfin_write(&drv_data->regs->baud, chip->baud); - write_STAT(drv_data, BIT_STAT_CLR); + bfin_write(&drv_data->regs->stat, BIT_STAT_CLR); bfin_spi_cs_active(drv_data, chip); dev_dbg(&drv_data->pdev->dev, @@ -749,7 +709,7 @@ static void bfin_spi_pump_transfers(unsigned long data) } /* poll for SPI completion before start */ - while (!(read_STAT(drv_data) & BIT_STAT_SPIF)) + while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_SPIF)) cpu_relax(); /* dirty hack for autobuffer DMA mode */ @@ -766,7 +726,7 @@ static void bfin_spi_pump_transfers(unsigned long data) enable_dma(drv_data->dma_channel); /* start SPI transfer */ - write_CTRL(drv_data, cr | BIT_CTL_TIMOD_DMA_TX); + bfin_write(&drv_data->regs->ctl, cr | BIT_CTL_TIMOD_DMA_TX); /* just return here, there can only be one transfer * in this mode @@ -821,7 +781,7 @@ static void bfin_spi_pump_transfers(unsigned long data) set_dma_config(drv_data->dma_channel, dma_config); local_irq_save(flags); SSYNC(); - write_CTRL(drv_data, cr); + bfin_write(&drv_data->regs->ctl, cr); enable_dma(drv_data->dma_channel); dma_enable_irq(drv_data->dma_channel); local_irq_restore(flags); @@ -835,7 +795,7 @@ static void bfin_spi_pump_transfers(unsigned long data) * problems with setting up the output value in TDBR prior to the * start of the transfer. */ - write_CTRL(drv_data, cr | BIT_CTL_TXMOD); + bfin_write(&drv_data->regs->ctl, cr | BIT_CTL_TXMOD); if (chip->pio_interrupt) { /* SPI irq should have been disabled by now */ @@ -845,19 +805,19 @@ static void bfin_spi_pump_transfers(unsigned long data) /* start transfer */ if (drv_data->tx == NULL) - write_TDBR(drv_data, chip->idle_tx_val); + bfin_write(&drv_data->regs->tdbr, chip->idle_tx_val); else { int loop; if (bits_per_word % 16 == 0) { u16 *buf = (u16 *)drv_data->tx; for (loop = 0; loop < bits_per_word / 16; loop++) { - write_TDBR(drv_data, *buf++); + bfin_write(&drv_data->regs->tdbr, *buf++); } } else if (bits_per_word % 8 == 0) { u8 *buf = (u8 *)drv_data->tx; for (loop = 0; loop < bits_per_word / 8; loop++) - write_TDBR(drv_data, *buf++); + bfin_write(&drv_data->regs->tdbr, *buf++); } drv_data->tx += drv_data->n_bytes; @@ -1005,7 +965,7 @@ static int bfin_spi_transfer(struct spi_device *spi, struct spi_message *msg) #define MAX_SPI_SSEL 7 -static u16 ssel[][MAX_SPI_SSEL] = { +static const u16 ssel[][MAX_SPI_SSEL] = { {P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3, P_SPI0_SSEL4, P_SPI0_SSEL5, P_SPI0_SSEL6, P_SPI0_SSEL7}, @@ -1226,7 +1186,7 @@ static void bfin_spi_cleanup(struct spi_device *spi) spi_set_ctldata(spi, NULL); } -static inline int bfin_spi_init_queue(struct bfin_spi_master_data *drv_data) +static int bfin_spi_init_queue(struct bfin_spi_master_data *drv_data) { INIT_LIST_HEAD(&drv_data->queue); spin_lock_init(&drv_data->lock); @@ -1248,7 +1208,7 @@ static inline int bfin_spi_init_queue(struct bfin_spi_master_data *drv_data) return 0; } -static inline int bfin_spi_start_queue(struct bfin_spi_master_data *drv_data) +static int bfin_spi_start_queue(struct bfin_spi_master_data *drv_data) { unsigned long flags; @@ -1270,7 +1230,7 @@ static inline int bfin_spi_start_queue(struct bfin_spi_master_data *drv_data) return 0; } -static inline int bfin_spi_stop_queue(struct bfin_spi_master_data *drv_data) +static int bfin_spi_stop_queue(struct bfin_spi_master_data *drv_data) { unsigned long flags; unsigned limit = 500; @@ -1299,7 +1259,7 @@ static inline int bfin_spi_stop_queue(struct bfin_spi_master_data *drv_data) return status; } -static inline int bfin_spi_destroy_queue(struct bfin_spi_master_data *drv_data) +static int bfin_spi_destroy_queue(struct bfin_spi_master_data *drv_data) { int status; @@ -1353,8 +1313,8 @@ static int __init bfin_spi_probe(struct platform_device *pdev) goto out_error_get_res; } - drv_data->regs_base = ioremap(res->start, resource_size(res)); - if (drv_data->regs_base == NULL) { + drv_data->regs = ioremap(res->start, resource_size(res)); + if (drv_data->regs == NULL) { dev_err(dev, "Cannot map IO\n"); status = -ENXIO; goto out_error_ioremap; @@ -1397,8 +1357,8 @@ static int __init bfin_spi_probe(struct platform_device *pdev) /* Reset SPI registers. If these registers were used by the boot loader, * the sky may fall on your head if you enable the dma controller. */ - write_CTRL(drv_data, BIT_CTL_CPHA | BIT_CTL_MASTER); - write_FLAG(drv_data, 0xFF00); + bfin_write(&drv_data->regs->ctl, BIT_CTL_CPHA | BIT_CTL_MASTER); + bfin_write(&drv_data->regs->flg, 0xFF00); /* Register with the SPI framework */ platform_set_drvdata(pdev, drv_data); @@ -1408,15 +1368,15 @@ static int __init bfin_spi_probe(struct platform_device *pdev) goto out_error_queue_alloc; } - dev_info(dev, "%s, Version %s, regs_base@%p, dma channel@%d\n", - DRV_DESC, DRV_VERSION, drv_data->regs_base, + dev_info(dev, "%s, Version %s, regs@%p, dma channel@%d\n", + DRV_DESC, DRV_VERSION, drv_data->regs, drv_data->dma_channel); return status; out_error_queue_alloc: bfin_spi_destroy_queue(drv_data); out_error_free_io: - iounmap((void *) drv_data->regs_base); + iounmap(drv_data->regs); out_error_ioremap: out_error_get_res: spi_master_put(master); @@ -1473,14 +1433,14 @@ static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state) if (status != 0) return status; - drv_data->ctrl_reg = read_CTRL(drv_data); - drv_data->flag_reg = read_FLAG(drv_data); + drv_data->ctrl_reg = bfin_read(&drv_data->regs->ctl); + drv_data->flag_reg = bfin_read(&drv_data->regs->flg); /* * reset SPI_CTL and SPI_FLG registers */ - write_CTRL(drv_data, BIT_CTL_CPHA | BIT_CTL_MASTER); - write_FLAG(drv_data, 0xFF00); + bfin_write(&drv_data->regs->ctl, BIT_CTL_CPHA | BIT_CTL_MASTER); + bfin_write(&drv_data->regs->flg, 0xFF00); return 0; } @@ -1490,8 +1450,8 @@ static int bfin_spi_resume(struct platform_device *pdev) struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); int status = 0; - write_CTRL(drv_data, drv_data->ctrl_reg); - write_FLAG(drv_data, drv_data->flag_reg); + bfin_write(&drv_data->regs->ctl, drv_data->ctrl_reg); + bfin_write(&drv_data->regs->flg, drv_data->flag_reg); /* Start the queue running */ status = bfin_spi_start_queue(drv_data); diff --git a/drivers/spi/spi_bitbang_txrx.h b/drivers/spi/spi-bitbang-txrx.h index c16bf85..c16bf85 100644 --- a/drivers/spi/spi_bitbang_txrx.h +++ b/drivers/spi/spi-bitbang-txrx.h diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi-bitbang.c index 14a63f6..02d57fb 100644 --- a/drivers/spi/spi_bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -1,5 +1,5 @@ /* - * spi_bitbang.c - polling/bitbanging SPI master controller driver utilities + * polling/bitbanging SPI master controller driver utilities * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -68,7 +68,7 @@ static unsigned bitbang_txrx_8( unsigned ns, struct spi_transfer *t ) { - unsigned bits = spi->bits_per_word; + unsigned bits = t->bits_per_word ? : spi->bits_per_word; unsigned count = t->len; const u8 *tx = t->tx_buf; u8 *rx = t->rx_buf; @@ -94,7 +94,7 @@ static unsigned bitbang_txrx_16( unsigned ns, struct spi_transfer *t ) { - unsigned bits = spi->bits_per_word; + unsigned bits = t->bits_per_word ? : spi->bits_per_word; unsigned count = t->len; const u16 *tx = t->tx_buf; u16 *rx = t->rx_buf; @@ -120,7 +120,7 @@ static unsigned bitbang_txrx_32( unsigned ns, struct spi_transfer *t ) { - unsigned bits = spi->bits_per_word; + unsigned bits = t->bits_per_word ? : spi->bits_per_word; unsigned count = t->len; const u32 *tx = t->tx_buf; u32 *rx = t->rx_buf; diff --git a/drivers/spi/spi_butterfly.c b/drivers/spi/spi-butterfly.c index 0d4ceba..9f907ec 100644 --- a/drivers/spi/spi_butterfly.c +++ b/drivers/spi/spi-butterfly.c @@ -1,5 +1,5 @@ /* - * spi_butterfly.c - parport-to-butterfly adapter + * parport-to-butterfly adapter * * Copyright (C) 2005 David Brownell * @@ -149,7 +149,7 @@ static void butterfly_chipselect(struct spi_device *spi, int value) #define spidelay(X) do{}while(0) //#define spidelay ndelay -#include "spi_bitbang_txrx.h" +#include "spi-bitbang-txrx.h" static u32 butterfly_txrx_word_mode0(struct spi_device *spi, diff --git a/drivers/spi/coldfire_qspi.c b/drivers/spi/spi-coldfire-qspi.c index ae2cd1c..ae2cd1c 100644 --- a/drivers/spi/coldfire_qspi.c +++ b/drivers/spi/spi-coldfire-qspi.c diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/spi-davinci.c index 1f0ed80..1f0ed80 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/spi-davinci.c diff --git a/drivers/spi/dw_spi_mid.c b/drivers/spi/spi-dw-mid.c index 4891782..130e555 100644 --- a/drivers/spi/dw_spi_mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -1,5 +1,5 @@ /* - * dw_spi_mid.c - special handling for DW core on Intel MID platform + * Special handling for DW core on Intel MID platform * * Copyright (c) 2009, Intel Corporation. * @@ -23,7 +23,7 @@ #include <linux/slab.h> #include <linux/spi/spi.h> -#include "dw_spi.h" +#include "spi-dw.h" #ifdef CONFIG_SPI_DW_MID_DMA #include <linux/intel_mid_dma.h> diff --git a/drivers/spi/dw_spi_mmio.c b/drivers/spi/spi-dw-mmio.c index e0e813d..34eb665 100644 --- a/drivers/spi/dw_spi_mmio.c +++ b/drivers/spi/spi-dw-mmio.c @@ -1,5 +1,5 @@ /* - * dw_spi_mmio.c - Memory-mapped interface driver for DW SPI Core + * Memory-mapped interface driver for DW SPI Core * * Copyright (c) 2010, Octasic semiconductor. * @@ -16,7 +16,7 @@ #include <linux/spi/spi.h> #include <linux/scatterlist.h> -#include "dw_spi.h" +#include "spi-dw.h" #define DRIVER_NAME "dw_spi_mmio" diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/spi-dw-pci.c index ad260aa..c5f37f0 100644 --- a/drivers/spi/dw_spi_pci.c +++ b/drivers/spi/spi-dw-pci.c @@ -1,5 +1,5 @@ /* - * dw_spi_pci.c - PCI interface driver for DW SPI Core + * PCI interface driver for DW SPI Core * * Copyright (c) 2009, Intel Corporation. * @@ -22,7 +22,7 @@ #include <linux/slab.h> #include <linux/spi/spi.h> -#include "dw_spi.h" +#include "spi-dw.h" #define DRIVER_NAME "dw_spi_pci" diff --git a/drivers/spi/dw_spi.c b/drivers/spi/spi-dw.c index 919fa9d..857cd30 100644 --- a/drivers/spi/dw_spi.c +++ b/drivers/spi/spi-dw.c @@ -1,5 +1,5 @@ /* - * dw_spi.c - Designware SPI core controller driver (refer pxa2xx_spi.c) + * Designware SPI core controller driver (refer pxa2xx_spi.c) * * Copyright (c) 2009, Intel Corporation. * @@ -24,7 +24,7 @@ #include <linux/slab.h> #include <linux/spi/spi.h> -#include "dw_spi.h" +#include "spi-dw.h" #ifdef CONFIG_DEBUG_FS #include <linux/debugfs.h> @@ -818,9 +818,11 @@ int __devinit dw_spi_add_host(struct dw_spi *dws) dws->prev_chip = NULL; dws->dma_inited = 0; dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60); + snprintf(dws->name, sizeof(dws->name), "dw_spi%d", + dws->bus_num); ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED, - "dw_spi", dws); + dws->name, dws); if (ret < 0) { dev_err(&master->dev, "can not get IRQ\n"); goto err_free_master; diff --git a/drivers/spi/dw_spi.h b/drivers/spi/spi-dw.h index 7a5e78d..8b7b07b 100644 --- a/drivers/spi/dw_spi.h +++ b/drivers/spi/spi-dw.h @@ -96,6 +96,7 @@ struct dw_spi { struct spi_device *cur_dev; struct device *parent_dev; enum dw_ssi_type type; + char name[16]; void __iomem *regs; unsigned long paddr; diff --git a/drivers/spi/ep93xx_spi.c b/drivers/spi/spi-ep93xx.c index d357007..1cf64547 100644 --- a/drivers/spi/ep93xx_spi.c +++ b/drivers/spi/spi-ep93xx.c @@ -1,7 +1,7 @@ /* * Driver for Cirrus Logic EP93xx SPI controller. * - * Copyright (c) 2010 Mika Westerberg + * Copyright (C) 2010-2011 Mika Westerberg * * Explicit FIFO handling code was inspired by amba-pl022 driver. * @@ -21,13 +21,16 @@ #include <linux/err.h> #include <linux/delay.h> #include <linux/device.h> +#include <linux/dmaengine.h> #include <linux/bitops.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/workqueue.h> #include <linux/sched.h> +#include <linux/scatterlist.h> #include <linux/spi/spi.h> +#include <mach/dma.h> #include <mach/ep93xx_spi.h> #define SSPCR0 0x0000 @@ -71,6 +74,7 @@ * @pdev: pointer to platform device * @clk: clock for the controller * @regs_base: pointer to ioremap()'d registers + * @sspdr_phys: physical address of the SSPDR register * @irq: IRQ number used by the driver * @min_rate: minimum clock rate (in Hz) supported by the controller * @max_rate: maximum clock rate (in Hz) supported by the controller @@ -84,6 +88,14 @@ * @rx: current byte in transfer to receive * @fifo_level: how full is FIFO (%0..%SPI_FIFO_SIZE - %1). Receiving one * frame decreases this level and sending one frame increases it. + * @dma_rx: RX DMA channel + * @dma_tx: TX DMA channel + * @dma_rx_data: RX parameters passed to the DMA engine + * @dma_tx_data: TX parameters passed to the DMA engine + * @rx_sgt: sg table for RX transfers + * @tx_sgt: sg table for TX transfers + * @zeropage: dummy page used as RX buffer when only TX buffer is passed in by + * the client * * This structure holds EP93xx SPI controller specific information. When * @running is %true, driver accepts transfer requests from protocol drivers. @@ -100,6 +112,7 @@ struct ep93xx_spi { const struct platform_device *pdev; struct clk *clk; void __iomem *regs_base; + unsigned long sspdr_phys; int irq; unsigned long min_rate; unsigned long max_rate; @@ -112,6 +125,13 @@ struct ep93xx_spi { size_t tx; size_t rx; size_t fifo_level; + struct dma_chan *dma_rx; + struct dma_chan *dma_tx; + struct ep93xx_dma_data dma_rx_data; + struct ep93xx_dma_data dma_tx_data; + struct sg_table rx_sgt; + struct sg_table tx_sgt; + void *zeropage; }; /** @@ -496,14 +516,195 @@ static int ep93xx_spi_read_write(struct ep93xx_spi *espi) espi->fifo_level++; } - if (espi->rx == t->len) { - msg->actual_length += t->len; + if (espi->rx == t->len) return 0; - } return -EINPROGRESS; } +static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi) +{ + /* + * Now everything is set up for the current transfer. We prime the TX + * FIFO, enable interrupts, and wait for the transfer to complete. + */ + if (ep93xx_spi_read_write(espi)) { + ep93xx_spi_enable_interrupts(espi); + wait_for_completion(&espi->wait); + } +} + +/** + * ep93xx_spi_dma_prepare() - prepares a DMA transfer + * @espi: ep93xx SPI controller struct + * @dir: DMA transfer direction + * + * Function configures the DMA, maps the buffer and prepares the DMA + * descriptor. Returns a valid DMA descriptor in case of success and ERR_PTR + * in case of failure. + */ +static struct dma_async_tx_descriptor * +ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) +{ + struct spi_transfer *t = espi->current_msg->state; + struct dma_async_tx_descriptor *txd; + enum dma_slave_buswidth buswidth; + struct dma_slave_config conf; + struct scatterlist *sg; + struct sg_table *sgt; + struct dma_chan *chan; + const void *buf, *pbuf; + size_t len = t->len; + int i, ret, nents; + + if (bits_per_word(espi) > 8) + buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES; + else + buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE; + + memset(&conf, 0, sizeof(conf)); + conf.direction = dir; + + if (dir == DMA_FROM_DEVICE) { + chan = espi->dma_rx; + buf = t->rx_buf; + sgt = &espi->rx_sgt; + + conf.src_addr = espi->sspdr_phys; + conf.src_addr_width = buswidth; + } else { + chan = espi->dma_tx; + buf = t->tx_buf; + sgt = &espi->tx_sgt; + + conf.dst_addr = espi->sspdr_phys; + conf.dst_addr_width = buswidth; + } + + ret = dmaengine_slave_config(chan, &conf); + if (ret) + return ERR_PTR(ret); + + /* + * We need to split the transfer into PAGE_SIZE'd chunks. This is + * because we are using @espi->zeropage to provide a zero RX buffer + * for the TX transfers and we have only allocated one page for that. + * + * For performance reasons we allocate a new sg_table only when + * needed. Otherwise we will re-use the current one. Eventually the + * last sg_table is released in ep93xx_spi_release_dma(). + */ + + nents = DIV_ROUND_UP(len, PAGE_SIZE); + if (nents != sgt->nents) { + sg_free_table(sgt); + + ret = sg_alloc_table(sgt, nents, GFP_KERNEL); + if (ret) + return ERR_PTR(ret); + } + + pbuf = buf; + for_each_sg(sgt->sgl, sg, sgt->nents, i) { + size_t bytes = min_t(size_t, len, PAGE_SIZE); + + if (buf) { + sg_set_page(sg, virt_to_page(pbuf), bytes, + offset_in_page(pbuf)); + } else { + sg_set_page(sg, virt_to_page(espi->zeropage), + bytes, 0); + } + + pbuf += bytes; + len -= bytes; + } + + if (WARN_ON(len)) { + dev_warn(&espi->pdev->dev, "len = %d expected 0!", len); + return ERR_PTR(-EINVAL); + } + + nents = dma_map_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); + if (!nents) + return ERR_PTR(-ENOMEM); + + txd = chan->device->device_prep_slave_sg(chan, sgt->sgl, nents, + dir, DMA_CTRL_ACK); + if (!txd) { + dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); + return ERR_PTR(-ENOMEM); + } + return txd; +} + +/** + * ep93xx_spi_dma_finish() - finishes with a DMA transfer + * @espi: ep93xx SPI controller struct + * @dir: DMA transfer direction + * + * Function finishes with the DMA transfer. After this, the DMA buffer is + * unmapped. + */ +static void ep93xx_spi_dma_finish(struct ep93xx_spi *espi, + enum dma_data_direction dir) +{ + struct dma_chan *chan; + struct sg_table *sgt; + + if (dir == DMA_FROM_DEVICE) { + chan = espi->dma_rx; + sgt = &espi->rx_sgt; + } else { + chan = espi->dma_tx; + sgt = &espi->tx_sgt; + } + + dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); +} + +static void ep93xx_spi_dma_callback(void *callback_param) +{ + complete(callback_param); +} + +static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi) +{ + struct spi_message *msg = espi->current_msg; + struct dma_async_tx_descriptor *rxd, *txd; + + rxd = ep93xx_spi_dma_prepare(espi, DMA_FROM_DEVICE); + if (IS_ERR(rxd)) { + dev_err(&espi->pdev->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd)); + msg->status = PTR_ERR(rxd); + return; + } + + txd = ep93xx_spi_dma_prepare(espi, DMA_TO_DEVICE); + if (IS_ERR(txd)) { + ep93xx_spi_dma_finish(espi, DMA_FROM_DEVICE); + dev_err(&espi->pdev->dev, "DMA TX failed: %ld\n", PTR_ERR(rxd)); + msg->status = PTR_ERR(txd); + return; + } + + /* We are ready when RX is done */ + rxd->callback = ep93xx_spi_dma_callback; + rxd->callback_param = &espi->wait; + + /* Now submit both descriptors and wait while they finish */ + dmaengine_submit(rxd); + dmaengine_submit(txd); + + dma_async_issue_pending(espi->dma_rx); + dma_async_issue_pending(espi->dma_tx); + + wait_for_completion(&espi->wait); + + ep93xx_spi_dma_finish(espi, DMA_TO_DEVICE); + ep93xx_spi_dma_finish(espi, DMA_FROM_DEVICE); +} + /** * ep93xx_spi_process_transfer() - processes one SPI transfer * @espi: ep93xx SPI controller struct @@ -556,13 +757,14 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi, espi->tx = 0; /* - * Now everything is set up for the current transfer. We prime the TX - * FIFO, enable interrupts, and wait for the transfer to complete. + * There is no point of setting up DMA for the transfers which will + * fit into the FIFO and can be transferred with a single interrupt. + * So in these cases we will be using PIO and don't bother for DMA. */ - if (ep93xx_spi_read_write(espi)) { - ep93xx_spi_enable_interrupts(espi); - wait_for_completion(&espi->wait); - } + if (espi->dma_rx && t->len > SPI_FIFO_SIZE) + ep93xx_spi_dma_transfer(espi); + else + ep93xx_spi_pio_transfer(espi); /* * In case of error during transmit, we bail out from processing @@ -571,6 +773,8 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi, if (msg->status) return; + msg->actual_length += t->len; + /* * After this transfer is finished, perform any possible * post-transfer actions requested by the protocol driver. @@ -752,6 +956,75 @@ static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +static bool ep93xx_spi_dma_filter(struct dma_chan *chan, void *filter_param) +{ + if (ep93xx_dma_chan_is_m2p(chan)) + return false; + + chan->private = filter_param; + return true; +} + +static int ep93xx_spi_setup_dma(struct ep93xx_spi *espi) +{ + dma_cap_mask_t mask; + int ret; + + espi->zeropage = (void *)get_zeroed_page(GFP_KERNEL); + if (!espi->zeropage) + return -ENOMEM; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + espi->dma_rx_data.port = EP93XX_DMA_SSP; + espi->dma_rx_data.direction = DMA_FROM_DEVICE; + espi->dma_rx_data.name = "ep93xx-spi-rx"; + + espi->dma_rx = dma_request_channel(mask, ep93xx_spi_dma_filter, + &espi->dma_rx_data); + if (!espi->dma_rx) { + ret = -ENODEV; + goto fail_free_page; + } + + espi->dma_tx_data.port = EP93XX_DMA_SSP; + espi->dma_tx_data.direction = DMA_TO_DEVICE; + espi->dma_tx_data.name = "ep93xx-spi-tx"; + + espi->dma_tx = dma_request_channel(mask, ep93xx_spi_dma_filter, + &espi->dma_tx_data); + if (!espi->dma_tx) { + ret = -ENODEV; + goto fail_release_rx; + } + + return 0; + +fail_release_rx: + dma_release_channel(espi->dma_rx); + espi->dma_rx = NULL; +fail_free_page: + free_page((unsigned long)espi->zeropage); + + return ret; +} + +static void ep93xx_spi_release_dma(struct ep93xx_spi *espi) +{ + if (espi->dma_rx) { + dma_release_channel(espi->dma_rx); + sg_free_table(&espi->rx_sgt); + } + if (espi->dma_tx) { + dma_release_channel(espi->dma_tx); + sg_free_table(&espi->tx_sgt); + } + + if (espi->zeropage) + free_page((unsigned long)espi->zeropage); +} + static int __init ep93xx_spi_probe(struct platform_device *pdev) { struct spi_master *master; @@ -818,6 +1091,7 @@ static int __init ep93xx_spi_probe(struct platform_device *pdev) goto fail_put_clock; } + espi->sspdr_phys = res->start + SSPDR; espi->regs_base = ioremap(res->start, resource_size(res)); if (!espi->regs_base) { dev_err(&pdev->dev, "failed to map resources\n"); @@ -832,10 +1106,13 @@ static int __init ep93xx_spi_probe(struct platform_device *pdev) goto fail_unmap_regs; } + if (info->use_dma && ep93xx_spi_setup_dma(espi)) + dev_warn(&pdev->dev, "DMA setup failed. Falling back to PIO\n"); + espi->wq = create_singlethread_workqueue("ep93xx_spid"); if (!espi->wq) { dev_err(&pdev->dev, "unable to create workqueue\n"); - goto fail_free_irq; + goto fail_free_dma; } INIT_WORK(&espi->msg_work, ep93xx_spi_work); INIT_LIST_HEAD(&espi->msg_queue); @@ -857,7 +1134,8 @@ static int __init ep93xx_spi_probe(struct platform_device *pdev) fail_free_queue: destroy_workqueue(espi->wq); -fail_free_irq: +fail_free_dma: + ep93xx_spi_release_dma(espi); free_irq(espi->irq, espi); fail_unmap_regs: iounmap(espi->regs_base); @@ -901,6 +1179,7 @@ static int __exit ep93xx_spi_remove(struct platform_device *pdev) } spin_unlock_irq(&espi->lock); + ep93xx_spi_release_dma(espi); free_irq(espi->irq, espi); iounmap(espi->regs_base); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); diff --git a/drivers/spi/spi_fsl_espi.c b/drivers/spi/spi-fsl-espi.c index 496f895..54e499d 100644 --- a/drivers/spi/spi_fsl_espi.c +++ b/drivers/spi/spi-fsl-espi.c @@ -22,7 +22,7 @@ #include <linux/err.h> #include <sysdev/fsl_soc.h> -#include "spi_fsl_lib.h" +#include "spi-fsl-lib.h" /* eSPI Controller registers */ struct fsl_espi_reg { diff --git a/drivers/spi/spi_fsl_lib.c b/drivers/spi/spi-fsl-lib.c index ff59f42..2674fad 100644 --- a/drivers/spi/spi_fsl_lib.c +++ b/drivers/spi/spi-fsl-lib.c @@ -25,7 +25,7 @@ #include <linux/of_spi.h> #include <sysdev/fsl_soc.h> -#include "spi_fsl_lib.h" +#include "spi-fsl-lib.h" #define MPC8XXX_SPI_RX_BUF(type) \ void mpc8xxx_spi_rx_buf_##type(u32 data, struct mpc8xxx_spi *mpc8xxx_spi) \ diff --git a/drivers/spi/spi_fsl_lib.h b/drivers/spi/spi-fsl-lib.h index cbe881b..cbe881b 100644 --- a/drivers/spi/spi_fsl_lib.h +++ b/drivers/spi/spi-fsl-lib.h diff --git a/drivers/spi/spi_fsl_spi.c b/drivers/spi/spi-fsl-spi.c index 7963c9b..d240755 100644 --- a/drivers/spi/spi_fsl_spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -37,7 +37,7 @@ #include <asm/cpm.h> #include <asm/qe.h> -#include "spi_fsl_lib.h" +#include "spi-fsl-lib.h" /* CPM1 and CPM2 are mutually exclusive. */ #ifdef CONFIG_CPM1 @@ -684,7 +684,7 @@ static unsigned long fsl_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) struct device_node *np = dev->of_node; const u32 *iprop; int size; - unsigned long spi_base_ofs; + void __iomem *spi_base; unsigned long pram_ofs = -ENOMEM; /* Can't use of_address_to_resource(), QE muram isn't at 0. */ @@ -702,33 +702,27 @@ static unsigned long fsl_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) return pram_ofs; } - /* CPM1 and CPM2 pram must be at a fixed addr. */ - if (!iprop || size != sizeof(*iprop) * 4) - return -ENOMEM; - - spi_base_ofs = cpm_muram_alloc_fixed(iprop[2], 2); - if (IS_ERR_VALUE(spi_base_ofs)) - return -ENOMEM; + spi_base = of_iomap(np, 1); + if (spi_base == NULL) + return -EINVAL; if (mspi->flags & SPI_CPM2) { pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64); - if (!IS_ERR_VALUE(pram_ofs)) { - u16 __iomem *spi_base = cpm_muram_addr(spi_base_ofs); - - out_be16(spi_base, pram_ofs); - } + out_be16(spi_base, pram_ofs); } else { - struct spi_pram __iomem *pram = cpm_muram_addr(spi_base_ofs); + struct spi_pram __iomem *pram = spi_base; u16 rpbase = in_be16(&pram->rpbase); /* Microcode relocation patch applied? */ if (rpbase) pram_ofs = rpbase; - else - return spi_base_ofs; + else { + pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64); + out_be16(spi_base, pram_ofs); + } } - cpm_muram_free(spi_base_ofs); + iounmap(spi_base); return pram_ofs; } diff --git a/drivers/spi/spi_gpio.c b/drivers/spi/spi-gpio.c index 63e51b0..0e88ab7 100644 --- a/drivers/spi/spi_gpio.c +++ b/drivers/spi/spi-gpio.c @@ -1,5 +1,5 @@ /* - * spi_gpio.c - SPI master driver using generic bitbanged GPIO + * SPI master driver using generic bitbanged GPIO * * Copyright (C) 2006,2008 David Brownell * @@ -69,7 +69,7 @@ struct spi_gpio { * #define SPI_MOSI_GPIO 120 * #define SPI_SCK_GPIO 121 * #define SPI_N_CHIPSEL 4 - * #include "spi_gpio.c" + * #include "spi-gpio.c" */ #ifndef DRIVER_NAME @@ -127,7 +127,7 @@ static inline int getmiso(const struct spi_device *spi) */ #define spidelay(nsecs) do {} while (0) -#include "spi_bitbang_txrx.h" +#include "spi-bitbang-txrx.h" /* * These functions can leverage inline expansion of GPIO calls to shrink diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi-imx.c index 69d6dba..8ac6542 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi-imx.c @@ -34,6 +34,9 @@ #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> #include <linux/types.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> #include <mach/spi.h> @@ -45,9 +48,6 @@ #define MXC_CSPIINT 0x0c #define MXC_RESET 0x1c -#define MX3_CSPISTAT 0x14 -#define MX3_CSPISTAT_RR (1 << 3) - /* generic defines to abstract from the different register layouts */ #define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */ #define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */ @@ -60,12 +60,12 @@ struct spi_imx_config { }; enum spi_imx_devtype { - SPI_IMX_VER_IMX1, - SPI_IMX_VER_0_0, - SPI_IMX_VER_0_4, - SPI_IMX_VER_0_5, - SPI_IMX_VER_0_7, - SPI_IMX_VER_2_3, + IMX1_CSPI, + IMX21_CSPI, + IMX27_CSPI, + IMX31_CSPI, + IMX35_CSPI, /* CSPI on all i.mx except above */ + IMX51_ECSPI, /* ECSPI on i.mx51 and later */ }; struct spi_imx_data; @@ -76,7 +76,7 @@ struct spi_imx_devtype_data { void (*trigger)(struct spi_imx_data *); int (*rx_available)(struct spi_imx_data *); void (*reset)(struct spi_imx_data *); - unsigned int fifosize; + enum spi_imx_devtype devtype; }; struct spi_imx_data { @@ -87,7 +87,6 @@ struct spi_imx_data { int irq; struct clk *clk; unsigned long spi_clk; - int *chipselect; unsigned int count; void (*tx)(struct spi_imx_data *); @@ -96,9 +95,25 @@ struct spi_imx_data { const void *tx_buf; unsigned int txfifo; /* number of words pushed in tx FIFO */ - struct spi_imx_devtype_data devtype_data; + struct spi_imx_devtype_data *devtype_data; + int chipselect[0]; }; +static inline int is_imx27_cspi(struct spi_imx_data *d) +{ + return d->devtype_data->devtype == IMX27_CSPI; +} + +static inline int is_imx35_cspi(struct spi_imx_data *d) +{ + return d->devtype_data->devtype == IMX35_CSPI; +} + +static inline unsigned spi_imx_get_fifosize(struct spi_imx_data *d) +{ + return (d->devtype_data->devtype == IMX51_ECSPI) ? 64 : 8; +} + #define MXC_SPI_BUF_RX(type) \ static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx) \ { \ @@ -140,14 +155,9 @@ static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192, /* MX21, MX27 */ static unsigned int spi_imx_clkdiv_1(unsigned int fin, - unsigned int fspi) + unsigned int fspi, unsigned int max) { - int i, max; - - if (cpu_is_mx21()) - max = 18; - else - max = 16; + int i; for (i = 2; i < max; i++) if (fspi * mxc_clkdivs[i] >= fin) @@ -171,30 +181,30 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin, return 7; } -#define SPI_IMX2_3_CTRL 0x08 -#define SPI_IMX2_3_CTRL_ENABLE (1 << 0) -#define SPI_IMX2_3_CTRL_XCH (1 << 2) -#define SPI_IMX2_3_CTRL_MODE_MASK (0xf << 4) -#define SPI_IMX2_3_CTRL_POSTDIV_OFFSET 8 -#define SPI_IMX2_3_CTRL_PREDIV_OFFSET 12 -#define SPI_IMX2_3_CTRL_CS(cs) ((cs) << 18) -#define SPI_IMX2_3_CTRL_BL_OFFSET 20 +#define MX51_ECSPI_CTRL 0x08 +#define MX51_ECSPI_CTRL_ENABLE (1 << 0) +#define MX51_ECSPI_CTRL_XCH (1 << 2) +#define MX51_ECSPI_CTRL_MODE_MASK (0xf << 4) +#define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8 +#define MX51_ECSPI_CTRL_PREDIV_OFFSET 12 +#define MX51_ECSPI_CTRL_CS(cs) ((cs) << 18) +#define MX51_ECSPI_CTRL_BL_OFFSET 20 -#define SPI_IMX2_3_CONFIG 0x0c -#define SPI_IMX2_3_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0)) -#define SPI_IMX2_3_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4)) -#define SPI_IMX2_3_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8)) -#define SPI_IMX2_3_CONFIG_SSBPOL(cs) (1 << ((cs) + 12)) +#define MX51_ECSPI_CONFIG 0x0c +#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0)) +#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4)) +#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8)) +#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs) + 12)) -#define SPI_IMX2_3_INT 0x10 -#define SPI_IMX2_3_INT_TEEN (1 << 0) -#define SPI_IMX2_3_INT_RREN (1 << 3) +#define MX51_ECSPI_INT 0x10 +#define MX51_ECSPI_INT_TEEN (1 << 0) +#define MX51_ECSPI_INT_RREN (1 << 3) -#define SPI_IMX2_3_STAT 0x18 -#define SPI_IMX2_3_STAT_RR (1 << 3) +#define MX51_ECSPI_STAT 0x18 +#define MX51_ECSPI_STAT_RR (1 << 3) /* MX51 eCSPI */ -static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi) +static unsigned int mx51_ecspi_clkdiv(unsigned int fin, unsigned int fspi) { /* * there are two 4-bit dividers, the pre-divider divides by @@ -222,36 +232,36 @@ static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi) pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n", __func__, fin, fspi, post, pre); - return (pre << SPI_IMX2_3_CTRL_PREDIV_OFFSET) | - (post << SPI_IMX2_3_CTRL_POSTDIV_OFFSET); + return (pre << MX51_ECSPI_CTRL_PREDIV_OFFSET) | + (post << MX51_ECSPI_CTRL_POSTDIV_OFFSET); } -static void __maybe_unused spi_imx2_3_intctrl(struct spi_imx_data *spi_imx, int enable) +static void __maybe_unused mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int enable) { unsigned val = 0; if (enable & MXC_INT_TE) - val |= SPI_IMX2_3_INT_TEEN; + val |= MX51_ECSPI_INT_TEEN; if (enable & MXC_INT_RR) - val |= SPI_IMX2_3_INT_RREN; + val |= MX51_ECSPI_INT_RREN; - writel(val, spi_imx->base + SPI_IMX2_3_INT); + writel(val, spi_imx->base + MX51_ECSPI_INT); } -static void __maybe_unused spi_imx2_3_trigger(struct spi_imx_data *spi_imx) +static void __maybe_unused mx51_ecspi_trigger(struct spi_imx_data *spi_imx) { u32 reg; - reg = readl(spi_imx->base + SPI_IMX2_3_CTRL); - reg |= SPI_IMX2_3_CTRL_XCH; - writel(reg, spi_imx->base + SPI_IMX2_3_CTRL); + reg = readl(spi_imx->base + MX51_ECSPI_CTRL); + reg |= MX51_ECSPI_CTRL_XCH; + writel(reg, spi_imx->base + MX51_ECSPI_CTRL); } -static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx, +static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { - u32 ctrl = SPI_IMX2_3_CTRL_ENABLE, cfg = 0; + u32 ctrl = MX51_ECSPI_CTRL_ENABLE, cfg = 0; /* * The hardware seems to have a race condition when changing modes. The @@ -260,42 +270,42 @@ static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx, * the same time. * So set master mode for all channels as we do not support slave mode. */ - ctrl |= SPI_IMX2_3_CTRL_MODE_MASK; + ctrl |= MX51_ECSPI_CTRL_MODE_MASK; /* set clock speed */ - ctrl |= spi_imx2_3_clkdiv(spi_imx->spi_clk, config->speed_hz); + ctrl |= mx51_ecspi_clkdiv(spi_imx->spi_clk, config->speed_hz); /* set chip select to use */ - ctrl |= SPI_IMX2_3_CTRL_CS(config->cs); + ctrl |= MX51_ECSPI_CTRL_CS(config->cs); - ctrl |= (config->bpw - 1) << SPI_IMX2_3_CTRL_BL_OFFSET; + ctrl |= (config->bpw - 1) << MX51_ECSPI_CTRL_BL_OFFSET; - cfg |= SPI_IMX2_3_CONFIG_SBBCTRL(config->cs); + cfg |= MX51_ECSPI_CONFIG_SBBCTRL(config->cs); if (config->mode & SPI_CPHA) - cfg |= SPI_IMX2_3_CONFIG_SCLKPHA(config->cs); + cfg |= MX51_ECSPI_CONFIG_SCLKPHA(config->cs); if (config->mode & SPI_CPOL) - cfg |= SPI_IMX2_3_CONFIG_SCLKPOL(config->cs); + cfg |= MX51_ECSPI_CONFIG_SCLKPOL(config->cs); if (config->mode & SPI_CS_HIGH) - cfg |= SPI_IMX2_3_CONFIG_SSBPOL(config->cs); + cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs); - writel(ctrl, spi_imx->base + SPI_IMX2_3_CTRL); - writel(cfg, spi_imx->base + SPI_IMX2_3_CONFIG); + writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); + writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG); return 0; } -static int __maybe_unused spi_imx2_3_rx_available(struct spi_imx_data *spi_imx) +static int __maybe_unused mx51_ecspi_rx_available(struct spi_imx_data *spi_imx) { - return readl(spi_imx->base + SPI_IMX2_3_STAT) & SPI_IMX2_3_STAT_RR; + return readl(spi_imx->base + MX51_ECSPI_STAT) & MX51_ECSPI_STAT_RR; } -static void __maybe_unused spi_imx2_3_reset(struct spi_imx_data *spi_imx) +static void __maybe_unused mx51_ecspi_reset(struct spi_imx_data *spi_imx) { /* drain receive buffer */ - while (spi_imx2_3_rx_available(spi_imx)) + while (mx51_ecspi_rx_available(spi_imx)) readl(spi_imx->base + MXC_CSPIRXDATA); } @@ -343,32 +353,7 @@ static void __maybe_unused mx31_trigger(struct spi_imx_data *spi_imx) writel(reg, spi_imx->base + MXC_CSPICTRL); } -static int __maybe_unused spi_imx0_4_config(struct spi_imx_data *spi_imx, - struct spi_imx_config *config) -{ - unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER; - int cs = spi_imx->chipselect[config->cs]; - - reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << - MX31_CSPICTRL_DR_SHIFT; - - reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT; - - if (config->mode & SPI_CPHA) - reg |= MX31_CSPICTRL_PHA; - if (config->mode & SPI_CPOL) - reg |= MX31_CSPICTRL_POL; - if (config->mode & SPI_CS_HIGH) - reg |= MX31_CSPICTRL_SSPOL; - if (cs < 0) - reg |= (cs + 32) << MX31_CSPICTRL_CS_SHIFT; - - writel(reg, spi_imx->base + MXC_CSPICTRL); - - return 0; -} - -static int __maybe_unused spi_imx0_7_config(struct spi_imx_data *spi_imx, +static int __maybe_unused mx31_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER; @@ -377,8 +362,12 @@ static int __maybe_unused spi_imx0_7_config(struct spi_imx_data *spi_imx, reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << MX31_CSPICTRL_DR_SHIFT; - reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT; - reg |= MX31_CSPICTRL_SSCTL; + if (is_imx35_cspi(spi_imx)) { + reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT; + reg |= MX31_CSPICTRL_SSCTL; + } else { + reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT; + } if (config->mode & SPI_CPHA) reg |= MX31_CSPICTRL_PHA; @@ -387,7 +376,9 @@ static int __maybe_unused spi_imx0_7_config(struct spi_imx_data *spi_imx, if (config->mode & SPI_CS_HIGH) reg |= MX31_CSPICTRL_SSPOL; if (cs < 0) - reg |= (cs + 32) << MX35_CSPICTRL_CS_SHIFT; + reg |= (cs + 32) << + (is_imx35_cspi(spi_imx) ? MX35_CSPICTRL_CS_SHIFT : + MX31_CSPICTRL_CS_SHIFT); writel(reg, spi_imx->base + MXC_CSPICTRL); @@ -399,77 +390,78 @@ static int __maybe_unused mx31_rx_available(struct spi_imx_data *spi_imx) return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR; } -static void __maybe_unused spi_imx0_4_reset(struct spi_imx_data *spi_imx) +static void __maybe_unused mx31_reset(struct spi_imx_data *spi_imx) { /* drain receive buffer */ - while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR) + while (readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR) readl(spi_imx->base + MXC_CSPIRXDATA); } -#define MX27_INTREG_RR (1 << 4) -#define MX27_INTREG_TEEN (1 << 9) -#define MX27_INTREG_RREN (1 << 13) +#define MX21_INTREG_RR (1 << 4) +#define MX21_INTREG_TEEN (1 << 9) +#define MX21_INTREG_RREN (1 << 13) -#define MX27_CSPICTRL_POL (1 << 5) -#define MX27_CSPICTRL_PHA (1 << 6) -#define MX27_CSPICTRL_SSPOL (1 << 8) -#define MX27_CSPICTRL_XCH (1 << 9) -#define MX27_CSPICTRL_ENABLE (1 << 10) -#define MX27_CSPICTRL_MASTER (1 << 11) -#define MX27_CSPICTRL_DR_SHIFT 14 -#define MX27_CSPICTRL_CS_SHIFT 19 +#define MX21_CSPICTRL_POL (1 << 5) +#define MX21_CSPICTRL_PHA (1 << 6) +#define MX21_CSPICTRL_SSPOL (1 << 8) +#define MX21_CSPICTRL_XCH (1 << 9) +#define MX21_CSPICTRL_ENABLE (1 << 10) +#define MX21_CSPICTRL_MASTER (1 << 11) +#define MX21_CSPICTRL_DR_SHIFT 14 +#define MX21_CSPICTRL_CS_SHIFT 19 -static void __maybe_unused mx27_intctrl(struct spi_imx_data *spi_imx, int enable) +static void __maybe_unused mx21_intctrl(struct spi_imx_data *spi_imx, int enable) { unsigned int val = 0; if (enable & MXC_INT_TE) - val |= MX27_INTREG_TEEN; + val |= MX21_INTREG_TEEN; if (enable & MXC_INT_RR) - val |= MX27_INTREG_RREN; + val |= MX21_INTREG_RREN; writel(val, spi_imx->base + MXC_CSPIINT); } -static void __maybe_unused mx27_trigger(struct spi_imx_data *spi_imx) +static void __maybe_unused mx21_trigger(struct spi_imx_data *spi_imx) { unsigned int reg; reg = readl(spi_imx->base + MXC_CSPICTRL); - reg |= MX27_CSPICTRL_XCH; + reg |= MX21_CSPICTRL_XCH; writel(reg, spi_imx->base + MXC_CSPICTRL); } -static int __maybe_unused mx27_config(struct spi_imx_data *spi_imx, +static int __maybe_unused mx21_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { - unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER; + unsigned int reg = MX21_CSPICTRL_ENABLE | MX21_CSPICTRL_MASTER; int cs = spi_imx->chipselect[config->cs]; + unsigned int max = is_imx27_cspi(spi_imx) ? 16 : 18; - reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz) << - MX27_CSPICTRL_DR_SHIFT; + reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz, max) << + MX21_CSPICTRL_DR_SHIFT; reg |= config->bpw - 1; if (config->mode & SPI_CPHA) - reg |= MX27_CSPICTRL_PHA; + reg |= MX21_CSPICTRL_PHA; if (config->mode & SPI_CPOL) - reg |= MX27_CSPICTRL_POL; + reg |= MX21_CSPICTRL_POL; if (config->mode & SPI_CS_HIGH) - reg |= MX27_CSPICTRL_SSPOL; + reg |= MX21_CSPICTRL_SSPOL; if (cs < 0) - reg |= (cs + 32) << MX27_CSPICTRL_CS_SHIFT; + reg |= (cs + 32) << MX21_CSPICTRL_CS_SHIFT; writel(reg, spi_imx->base + MXC_CSPICTRL); return 0; } -static int __maybe_unused mx27_rx_available(struct spi_imx_data *spi_imx) +static int __maybe_unused mx21_rx_available(struct spi_imx_data *spi_imx) { - return readl(spi_imx->base + MXC_CSPIINT) & MX27_INTREG_RR; + return readl(spi_imx->base + MXC_CSPIINT) & MX21_INTREG_RR; } -static void __maybe_unused spi_imx0_0_reset(struct spi_imx_data *spi_imx) +static void __maybe_unused mx21_reset(struct spi_imx_data *spi_imx) { writel(1, spi_imx->base + MXC_RESET); } @@ -535,61 +527,94 @@ static void __maybe_unused mx1_reset(struct spi_imx_data *spi_imx) writel(1, spi_imx->base + MXC_RESET); } -/* - * These version numbers are taken from the Freescale driver. Unfortunately it - * doesn't support i.MX1, so this entry doesn't match the scheme. :-( - */ -static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = { -#ifdef CONFIG_SPI_IMX_VER_IMX1 - [SPI_IMX_VER_IMX1] = { - .intctrl = mx1_intctrl, - .config = mx1_config, - .trigger = mx1_trigger, - .rx_available = mx1_rx_available, - .reset = mx1_reset, - .fifosize = 8, - }, -#endif -#ifdef CONFIG_SPI_IMX_VER_0_0 - [SPI_IMX_VER_0_0] = { - .intctrl = mx27_intctrl, - .config = mx27_config, - .trigger = mx27_trigger, - .rx_available = mx27_rx_available, - .reset = spi_imx0_0_reset, - .fifosize = 8, - }, -#endif -#ifdef CONFIG_SPI_IMX_VER_0_4 - [SPI_IMX_VER_0_4] = { - .intctrl = mx31_intctrl, - .config = spi_imx0_4_config, - .trigger = mx31_trigger, - .rx_available = mx31_rx_available, - .reset = spi_imx0_4_reset, - .fifosize = 8, - }, -#endif -#ifdef CONFIG_SPI_IMX_VER_0_7 - [SPI_IMX_VER_0_7] = { - .intctrl = mx31_intctrl, - .config = spi_imx0_7_config, - .trigger = mx31_trigger, - .rx_available = mx31_rx_available, - .reset = spi_imx0_4_reset, - .fifosize = 8, - }, -#endif -#ifdef CONFIG_SPI_IMX_VER_2_3 - [SPI_IMX_VER_2_3] = { - .intctrl = spi_imx2_3_intctrl, - .config = spi_imx2_3_config, - .trigger = spi_imx2_3_trigger, - .rx_available = spi_imx2_3_rx_available, - .reset = spi_imx2_3_reset, - .fifosize = 64, - }, -#endif +static struct spi_imx_devtype_data imx1_cspi_devtype_data = { + .intctrl = mx1_intctrl, + .config = mx1_config, + .trigger = mx1_trigger, + .rx_available = mx1_rx_available, + .reset = mx1_reset, + .devtype = IMX1_CSPI, +}; + +static struct spi_imx_devtype_data imx21_cspi_devtype_data = { + .intctrl = mx21_intctrl, + .config = mx21_config, + .trigger = mx21_trigger, + .rx_available = mx21_rx_available, + .reset = mx21_reset, + .devtype = IMX21_CSPI, +}; + +static struct spi_imx_devtype_data imx27_cspi_devtype_data = { + /* i.mx27 cspi shares the functions with i.mx21 one */ + .intctrl = mx21_intctrl, + .config = mx21_config, + .trigger = mx21_trigger, + .rx_available = mx21_rx_available, + .reset = mx21_reset, + .devtype = IMX27_CSPI, +}; + +static struct spi_imx_devtype_data imx31_cspi_devtype_data = { + .intctrl = mx31_intctrl, + .config = mx31_config, + .trigger = mx31_trigger, + .rx_available = mx31_rx_available, + .reset = mx31_reset, + .devtype = IMX31_CSPI, +}; + +static struct spi_imx_devtype_data imx35_cspi_devtype_data = { + /* i.mx35 and later cspi shares the functions with i.mx31 one */ + .intctrl = mx31_intctrl, + .config = mx31_config, + .trigger = mx31_trigger, + .rx_available = mx31_rx_available, + .reset = mx31_reset, + .devtype = IMX35_CSPI, +}; + +static struct spi_imx_devtype_data imx51_ecspi_devtype_data = { + .intctrl = mx51_ecspi_intctrl, + .config = mx51_ecspi_config, + .trigger = mx51_ecspi_trigger, + .rx_available = mx51_ecspi_rx_available, + .reset = mx51_ecspi_reset, + .devtype = IMX51_ECSPI, +}; + +static struct platform_device_id spi_imx_devtype[] = { + { + .name = "imx1-cspi", + .driver_data = (kernel_ulong_t) &imx1_cspi_devtype_data, + }, { + .name = "imx21-cspi", + .driver_data = (kernel_ulong_t) &imx21_cspi_devtype_data, + }, { + .name = "imx27-cspi", + .driver_data = (kernel_ulong_t) &imx27_cspi_devtype_data, + }, { + .name = "imx31-cspi", + .driver_data = (kernel_ulong_t) &imx31_cspi_devtype_data, + }, { + .name = "imx35-cspi", + .driver_data = (kernel_ulong_t) &imx35_cspi_devtype_data, + }, { + .name = "imx51-ecspi", + .driver_data = (kernel_ulong_t) &imx51_ecspi_devtype_data, + }, { + /* sentinel */ + } +}; + +static const struct of_device_id spi_imx_dt_ids[] = { + { .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, }, + { .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, }, + { .compatible = "fsl,imx27-cspi", .data = &imx27_cspi_devtype_data, }, + { .compatible = "fsl,imx31-cspi", .data = &imx31_cspi_devtype_data, }, + { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, }, + { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, }, + { /* sentinel */ } }; static void spi_imx_chipselect(struct spi_device *spi, int is_active) @@ -607,21 +632,21 @@ static void spi_imx_chipselect(struct spi_device *spi, int is_active) static void spi_imx_push(struct spi_imx_data *spi_imx) { - while (spi_imx->txfifo < spi_imx->devtype_data.fifosize) { + while (spi_imx->txfifo < spi_imx_get_fifosize(spi_imx)) { if (!spi_imx->count) break; spi_imx->tx(spi_imx); spi_imx->txfifo++; } - spi_imx->devtype_data.trigger(spi_imx); + spi_imx->devtype_data->trigger(spi_imx); } static irqreturn_t spi_imx_isr(int irq, void *dev_id) { struct spi_imx_data *spi_imx = dev_id; - while (spi_imx->devtype_data.rx_available(spi_imx)) { + while (spi_imx->devtype_data->rx_available(spi_imx)) { spi_imx->rx(spi_imx); spi_imx->txfifo--; } @@ -635,12 +660,12 @@ static irqreturn_t spi_imx_isr(int irq, void *dev_id) /* No data left to push, but still waiting for rx data, * enable receive data available interrupt. */ - spi_imx->devtype_data.intctrl( + spi_imx->devtype_data->intctrl( spi_imx, MXC_INT_RR); return IRQ_HANDLED; } - spi_imx->devtype_data.intctrl(spi_imx, 0); + spi_imx->devtype_data->intctrl(spi_imx, 0); complete(&spi_imx->xfer_done); return IRQ_HANDLED; @@ -677,7 +702,7 @@ static int spi_imx_setupxfer(struct spi_device *spi, } else BUG(); - spi_imx->devtype_data.config(spi_imx, &config); + spi_imx->devtype_data->config(spi_imx, &config); return 0; } @@ -696,7 +721,7 @@ static int spi_imx_transfer(struct spi_device *spi, spi_imx_push(spi_imx); - spi_imx->devtype_data.intctrl(spi_imx, MXC_INT_TE); + spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE); wait_for_completion(&spi_imx->xfer_done); @@ -723,72 +748,47 @@ static void spi_imx_cleanup(struct spi_device *spi) { } -static struct platform_device_id spi_imx_devtype[] = { - { - .name = "imx1-cspi", - .driver_data = SPI_IMX_VER_IMX1, - }, { - .name = "imx21-cspi", - .driver_data = SPI_IMX_VER_0_0, - }, { - .name = "imx25-cspi", - .driver_data = SPI_IMX_VER_0_7, - }, { - .name = "imx27-cspi", - .driver_data = SPI_IMX_VER_0_0, - }, { - .name = "imx31-cspi", - .driver_data = SPI_IMX_VER_0_4, - }, { - .name = "imx35-cspi", - .driver_data = SPI_IMX_VER_0_7, - }, { - .name = "imx51-cspi", - .driver_data = SPI_IMX_VER_0_7, - }, { - .name = "imx51-ecspi", - .driver_data = SPI_IMX_VER_2_3, - }, { - .name = "imx53-cspi", - .driver_data = SPI_IMX_VER_0_7, - }, { - .name = "imx53-ecspi", - .driver_data = SPI_IMX_VER_2_3, - }, { - /* sentinel */ - } -}; - static int __devinit spi_imx_probe(struct platform_device *pdev) { - struct spi_imx_master *mxc_platform_info; + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *of_id = + of_match_device(spi_imx_dt_ids, &pdev->dev); + struct spi_imx_master *mxc_platform_info = + dev_get_platdata(&pdev->dev); struct spi_master *master; struct spi_imx_data *spi_imx; struct resource *res; - int i, ret; + int i, ret, num_cs; - mxc_platform_info = dev_get_platdata(&pdev->dev); - if (!mxc_platform_info) { + if (!np && !mxc_platform_info) { dev_err(&pdev->dev, "can't get the platform data\n"); return -EINVAL; } - master = spi_alloc_master(&pdev->dev, sizeof(struct spi_imx_data)); + ret = of_property_read_u32(np, "fsl,spi-num-chipselects", &num_cs); + if (ret < 0) + num_cs = mxc_platform_info->num_chipselect; + + master = spi_alloc_master(&pdev->dev, + sizeof(struct spi_imx_data) + sizeof(int) * num_cs); if (!master) return -ENOMEM; platform_set_drvdata(pdev, master); master->bus_num = pdev->id; - master->num_chipselect = mxc_platform_info->num_chipselect; + master->num_chipselect = num_cs; spi_imx = spi_master_get_devdata(master); spi_imx->bitbang.master = spi_master_get(master); - spi_imx->chipselect = mxc_platform_info->chipselect; for (i = 0; i < master->num_chipselect; i++) { - if (spi_imx->chipselect[i] < 0) + int cs_gpio = of_get_named_gpio(np, "cs-gpios", i); + if (cs_gpio < 0) + cs_gpio = mxc_platform_info->chipselect[i]; + if (cs_gpio < 0) continue; + spi_imx->chipselect[i] = cs_gpio; ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME); if (ret) { while (i > 0) { @@ -810,8 +810,8 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) init_completion(&spi_imx->xfer_done); - spi_imx->devtype_data = - spi_imx_devtype_data[pdev->id_entry->driver_data]; + spi_imx->devtype_data = of_id ? of_id->data : + (struct spi_imx_devtype_data *) pdev->id_entry->driver_data; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -854,10 +854,11 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) clk_enable(spi_imx->clk); spi_imx->spi_clk = clk_get_rate(spi_imx->clk); - spi_imx->devtype_data.reset(spi_imx); + spi_imx->devtype_data->reset(spi_imx); - spi_imx->devtype_data.intctrl(spi_imx, 0); + spi_imx->devtype_data->intctrl(spi_imx, 0); + master->dev.of_node = pdev->dev.of_node; ret = spi_bitbang_start(&spi_imx->bitbang); if (ret) { dev_err(&pdev->dev, "bitbang start failed with %d\n", ret); @@ -920,6 +921,7 @@ static struct platform_driver spi_imx_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, + .of_match_table = spi_imx_dt_ids, }, .id_table = spi_imx_devtype, .probe = spi_imx_probe, diff --git a/drivers/spi/spi_lm70llp.c b/drivers/spi/spi-lm70llp.c index 7746a41..933eb9d 100644 --- a/drivers/spi/spi_lm70llp.c +++ b/drivers/spi/spi-lm70llp.c @@ -1,5 +1,5 @@ /* - * spi_lm70llp.c - driver for LM70EVAL-LLP board for the LM70 sensor + * Driver for LM70EVAL-LLP board for the LM70 sensor * * Copyright (C) 2006 Kaiwan N Billimoria <kaiwan@designergraphix.com> * @@ -174,7 +174,7 @@ static inline int getmiso(struct spi_device *s) } /*--------------------------------------------------------------------*/ -#include "spi_bitbang_txrx.h" +#include "spi-bitbang-txrx.h" static void lm70_chipselect(struct spi_device *spi, int value) { diff --git a/drivers/spi/mpc512x_psc_spi.c b/drivers/spi/spi-mpc512x-psc.c index 6a5b423..6a5b423 100644 --- a/drivers/spi/mpc512x_psc_spi.c +++ b/drivers/spi/spi-mpc512x-psc.c diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/spi-mpc52xx-psc.c index e30baf0..e30baf0 100644 --- a/drivers/spi/mpc52xx_psc_spi.c +++ b/drivers/spi/spi-mpc52xx-psc.c diff --git a/drivers/spi/mpc52xx_spi.c b/drivers/spi/spi-mpc52xx.c index 015a974..015a974 100644 --- a/drivers/spi/mpc52xx_spi.c +++ b/drivers/spi/spi-mpc52xx.c diff --git a/drivers/spi/spi_nuc900.c b/drivers/spi/spi-nuc900.c index 3cd15f6..c0a6ce8 100644 --- a/drivers/spi/spi_nuc900.c +++ b/drivers/spi/spi-nuc900.c @@ -1,5 +1,4 @@ -/* linux/drivers/spi/spi_nuc900.c - * +/* * Copyright (c) 2009 Nuvoton technology. * Wan ZongShun <mcuos.com@gmail.com> * @@ -7,7 +6,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * -*/ + */ #include <linux/init.h> #include <linux/spinlock.h> diff --git a/drivers/spi/spi_oc_tiny.c b/drivers/spi/spi-oc-tiny.c index f1bde66..f1bde66 100644 --- a/drivers/spi/spi_oc_tiny.c +++ b/drivers/spi/spi-oc-tiny.c diff --git a/drivers/spi/omap_spi_100k.c b/drivers/spi/spi-omap-100k.c index 9bd1c92..9bd1c92 100644 --- a/drivers/spi/omap_spi_100k.c +++ b/drivers/spi/spi-omap-100k.c diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/spi-omap-uwire.c index 160d326..00a8e9d 100644 --- a/drivers/spi/omap_uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -1,5 +1,5 @@ /* - * omap_uwire.c -- MicroWire interface driver for OMAP + * MicroWire interface driver for OMAP * * Copyright 2003 MontaVista Software Inc. <source@mvista.com> * diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 969cdd2..fde3a2d 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -1116,8 +1116,8 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev) status = -ENODEV; goto err1; } - if (!request_mem_region(r->start, (r->end - r->start) + 1, - dev_name(&pdev->dev))) { + if (!request_mem_region(r->start, resource_size(r), + dev_name(&pdev->dev))) { status = -EBUSY; goto err1; } @@ -1125,7 +1125,7 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev) r->start += pdata->regs_offset; r->end += pdata->regs_offset; mcspi->phys = r->start; - mcspi->base = ioremap(r->start, r->end - r->start + 1); + mcspi->base = ioremap(r->start, resource_size(r)); if (!mcspi->base) { dev_dbg(&pdev->dev, "can't ioremap MCSPI\n"); status = -ENOMEM; @@ -1190,7 +1190,7 @@ err4: err3: kfree(mcspi->dma_channels); err2: - release_mem_region(r->start, (r->end - r->start) + 1); + release_mem_region(r->start, resource_size(r)); iounmap(mcspi->base); err1: return status; @@ -1210,7 +1210,7 @@ static int __exit omap2_mcspi_remove(struct platform_device *pdev) omap2_mcspi_disable_clocks(mcspi); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, (r->end - r->start) + 1); + release_mem_region(r->start, resource_size(r)); base = mcspi->base; spi_unregister_master(master); diff --git a/drivers/spi/orion_spi.c b/drivers/spi/spi-orion.c index 0b677dc..9421a39 100644 --- a/drivers/spi/orion_spi.c +++ b/drivers/spi/spi-orion.c @@ -1,5 +1,5 @@ /* - * orion_spi.c -- Marvell Orion SPI controller driver + * Marvell Orion SPI controller driver * * Author: Shadi Ammouri <shadi@marvell.com> * Copyright (C) 2007-2008 Marvell Ltd. @@ -489,7 +489,7 @@ static int __init orion_spi_probe(struct platform_device *pdev) goto out; } - if (!request_mem_region(r->start, (r->end - r->start) + 1, + if (!request_mem_region(r->start, resource_size(r), dev_name(&pdev->dev))) { status = -EBUSY; goto out; @@ -511,7 +511,7 @@ static int __init orion_spi_probe(struct platform_device *pdev) return status; out_rel_mem: - release_mem_region(r->start, (r->end - r->start) + 1); + release_mem_region(r->start, resource_size(r)); out: spi_master_put(master); @@ -531,7 +531,7 @@ static int __exit orion_spi_remove(struct platform_device *pdev) cancel_work_sync(&spi->work); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, (r->end - r->start) + 1); + release_mem_region(r->start, resource_size(r)); spi_unregister_master(master); diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/spi-pl022.c index d18ce9e..eba88c7 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1,6 +1,4 @@ /* - * drivers/spi/amba-pl022.c - * * A driver for the ARM PL022 PrimeCell SSP/SPI bus master. * * Copyright (C) 2008-2009 ST-Ericsson AB @@ -42,6 +40,7 @@ #include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/scatterlist.h> +#include <linux/pm_runtime.h> /* * This macro is used to define some register default values. @@ -383,6 +382,8 @@ struct pl022 { enum ssp_reading read; enum ssp_writing write; u32 exp_fifo_level; + enum ssp_rx_level_trig rx_lev_trig; + enum ssp_tx_level_trig tx_lev_trig; /* DMA settings */ #ifdef CONFIG_DMA_ENGINE struct dma_chan *dma_rx_channel; @@ -517,6 +518,7 @@ static void giveback(struct pl022 *pl022) clk_disable(pl022->clk); amba_pclk_disable(pl022->adev); amba_vcore_disable(pl022->adev); + pm_runtime_put(&pl022->adev->dev); } /** @@ -909,12 +911,10 @@ static int configure_dma(struct pl022 *pl022) struct dma_slave_config rx_conf = { .src_addr = SSP_DR(pl022->phybase), .direction = DMA_FROM_DEVICE, - .src_maxburst = pl022->vendor->fifodepth >> 1, }; struct dma_slave_config tx_conf = { .dst_addr = SSP_DR(pl022->phybase), .direction = DMA_TO_DEVICE, - .dst_maxburst = pl022->vendor->fifodepth >> 1, }; unsigned int pages; int ret; @@ -928,6 +928,54 @@ static int configure_dma(struct pl022 *pl022) if (!rxchan || !txchan) return -ENODEV; + /* + * If supplied, the DMA burstsize should equal the FIFO trigger level. + * Notice that the DMA engine uses one-to-one mapping. Since we can + * not trigger on 2 elements this needs explicit mapping rather than + * calculation. + */ + switch (pl022->rx_lev_trig) { + case SSP_RX_1_OR_MORE_ELEM: + rx_conf.src_maxburst = 1; + break; + case SSP_RX_4_OR_MORE_ELEM: + rx_conf.src_maxburst = 4; + break; + case SSP_RX_8_OR_MORE_ELEM: + rx_conf.src_maxburst = 8; + break; + case SSP_RX_16_OR_MORE_ELEM: + rx_conf.src_maxburst = 16; + break; + case SSP_RX_32_OR_MORE_ELEM: + rx_conf.src_maxburst = 32; + break; + default: + rx_conf.src_maxburst = pl022->vendor->fifodepth >> 1; + break; + } + + switch (pl022->tx_lev_trig) { + case SSP_TX_1_OR_MORE_EMPTY_LOC: + tx_conf.dst_maxburst = 1; + break; + case SSP_TX_4_OR_MORE_EMPTY_LOC: + tx_conf.dst_maxburst = 4; + break; + case SSP_TX_8_OR_MORE_EMPTY_LOC: + tx_conf.dst_maxburst = 8; + break; + case SSP_TX_16_OR_MORE_EMPTY_LOC: + tx_conf.dst_maxburst = 16; + break; + case SSP_TX_32_OR_MORE_EMPTY_LOC: + tx_conf.dst_maxburst = 32; + break; + default: + tx_conf.dst_maxburst = pl022->vendor->fifodepth >> 1; + break; + } + switch (pl022->read) { case READING_NULL: /* Use the same as for writing */ @@ -1496,6 +1544,7 @@ static void pump_messages(struct work_struct *work) * and core will be disabled when giveback() is called in each method * (poll/interrupt/DMA) */ + pm_runtime_get_sync(&pl022->adev->dev); amba_vcore_enable(pl022->adev); amba_pclk_enable(pl022->adev); clk_enable(pl022->clk); @@ -1629,17 +1678,57 @@ static int verify_controller_parameters(struct pl022 *pl022, "Communication mode is configured incorrectly\n"); return -EINVAL; } - if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM) - || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) { + switch (chip_info->rx_lev_trig) { + case SSP_RX_1_OR_MORE_ELEM: + case SSP_RX_4_OR_MORE_ELEM: + case SSP_RX_8_OR_MORE_ELEM: + /* These are always OK, all variants can handle this */ + break; + case SSP_RX_16_OR_MORE_ELEM: + if (pl022->vendor->fifodepth < 16) { + dev_err(&pl022->adev->dev, + "RX FIFO Trigger Level is configured incorrectly\n"); + return -EINVAL; + } + break; + case SSP_RX_32_OR_MORE_ELEM: + if (pl022->vendor->fifodepth < 32) { + dev_err(&pl022->adev->dev, + "RX FIFO Trigger Level is configured incorrectly\n"); + return -EINVAL; + } + break; + default: dev_err(&pl022->adev->dev, "RX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; + break; } - if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC) - || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) { + switch (chip_info->tx_lev_trig) { + case SSP_TX_1_OR_MORE_EMPTY_LOC: + case SSP_TX_4_OR_MORE_EMPTY_LOC: + case SSP_TX_8_OR_MORE_EMPTY_LOC: + /* These are always OK, all variants can handle this */ + break; + case SSP_TX_16_OR_MORE_EMPTY_LOC: + if (pl022->vendor->fifodepth < 16) { + dev_err(&pl022->adev->dev, + "TX FIFO Trigger Level is configured incorrectly\n"); + return -EINVAL; + } + break; + case SSP_TX_32_OR_MORE_EMPTY_LOC: + if (pl022->vendor->fifodepth < 32) { + dev_err(&pl022->adev->dev, + "TX FIFO Trigger Level is configured incorrectly\n"); + return -EINVAL; + } + break; + default: dev_err(&pl022->adev->dev, "TX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; + break; } if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) { if ((chip_info->ctrl_len < SSP_BITS_4) @@ -1874,6 +1963,9 @@ static int pl022_setup(struct spi_device *spi) goto err_config_params; } + pl022->rx_lev_trig = chip_info->rx_lev_trig; + pl022->tx_lev_trig = chip_info->tx_lev_trig; + /* Now set controller state based on controller data */ chip->xfer_type = chip_info->com_mode; if (!chip_info->cs_control) { @@ -2094,6 +2186,8 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) } printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n", adev->res.start, pl022->virtbase); + pm_runtime_enable(dev); + pm_runtime_resume(dev); pl022->clk = clk_get(&adev->dev, NULL); if (IS_ERR(pl022->clk)) { @@ -2155,6 +2249,7 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) destroy_queue(pl022); pl022_dma_remove(pl022); free_irq(adev->irq[0], pl022); + pm_runtime_disable(&adev->dev); err_no_irq: clk_put(pl022->clk); err_no_clk: diff --git a/drivers/spi/spi_ppc4xx.c b/drivers/spi/spi-ppc4xx.c index 2a298c0..b267fd9 100644 --- a/drivers/spi/spi_ppc4xx.c +++ b/drivers/spi/spi-ppc4xx.c @@ -502,7 +502,7 @@ static int __init spi_ppc4xx_of_probe(struct platform_device *op) goto free_gpios; } hw->mapbase = resource.start; - hw->mapsize = resource.end - resource.start + 1; + hw->mapsize = resource_size(&resource); /* Sanity check */ if (hw->mapsize < sizeof(struct spi_ppc4xx_regs)) { diff --git a/drivers/spi/pxa2xx_spi_pci.c b/drivers/spi/spi-pxa2xx-pci.c index 378e504..378e504 100644 --- a/drivers/spi/pxa2xx_spi_pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/spi-pxa2xx.c index dc25bee..dc25bee 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/spi-pxa2xx.c diff --git a/drivers/spi/spi_s3c24xx_fiq.S b/drivers/spi/spi-s3c24xx-fiq.S index 3793cae..059f2dc 100644 --- a/drivers/spi/spi_s3c24xx_fiq.S +++ b/drivers/spi/spi-s3c24xx-fiq.S @@ -17,7 +17,7 @@ #include <mach/regs-irq.h> #include <plat/regs-spi.h> -#include "spi_s3c24xx_fiq.h" +#include "spi-s3c24xx-fiq.h" .text diff --git a/drivers/spi/spi_s3c24xx_fiq.h b/drivers/spi/spi-s3c24xx-fiq.h index a5950bb..a5950bb 100644 --- a/drivers/spi/spi_s3c24xx_fiq.h +++ b/drivers/spi/spi-s3c24xx-fiq.h diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi-s3c24xx.c index 1a5fcab..1996ac5 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi-s3c24xx.c @@ -1,5 +1,4 @@ -/* linux/drivers/spi/spi_s3c24xx.c - * +/* * Copyright (c) 2006 Ben Dooks * Copyright 2006-2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -32,7 +31,7 @@ #include <plat/fiq.h> #include <asm/fiq.h> -#include "spi_s3c24xx_fiq.h" +#include "spi-s3c24xx-fiq.h" /** * s3c24xx_spi_devstate - per device data diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 8945e20..595dacc 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -1,5 +1,4 @@ -/* linux/drivers/spi/spi_s3c64xx.c - * +/* * Copyright (C) 2009 Samsung Electronics Ltd. * Jaswinder Singh <jassi.brar@samsung.com> * diff --git a/drivers/spi/spi_sh_msiof.c b/drivers/spi/spi-sh-msiof.c index e00d94b..e00d94b 100644 --- a/drivers/spi/spi_sh_msiof.c +++ b/drivers/spi/spi-sh-msiof.c diff --git a/drivers/spi/spi_sh_sci.c b/drivers/spi/spi-sh-sci.c index 5c64391..e7779c0 100644 --- a/drivers/spi/spi_sh_sci.c +++ b/drivers/spi/spi-sh-sci.c @@ -78,7 +78,7 @@ static inline u32 getmiso(struct spi_device *dev) #define spidelay(x) ndelay(x) -#include "spi_bitbang_txrx.h" +#include "spi-bitbang-txrx.h" static u32 sh_sci_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs, u32 word, u8 bits) diff --git a/drivers/spi/spi_sh.c b/drivers/spi/spi-sh.c index 9eedd71..9eedd71 100644 --- a/drivers/spi/spi_sh.c +++ b/drivers/spi/spi-sh.c diff --git a/drivers/spi/spi_stmp.c b/drivers/spi/spi-stmp.c index fadff76..fadff76 100644 --- a/drivers/spi/spi_stmp.c +++ b/drivers/spi/spi-stmp.c diff --git a/drivers/spi/spi_tegra.c b/drivers/spi/spi-tegra.c index 6c3aa6e..a5a6302 100644 --- a/drivers/spi/spi_tegra.c +++ b/drivers/spi/spi-tegra.c @@ -498,14 +498,14 @@ static int __init spi_tegra_probe(struct platform_device *pdev) goto err0; } - if (!request_mem_region(r->start, (r->end - r->start) + 1, + if (!request_mem_region(r->start, resource_size(r), dev_name(&pdev->dev))) { ret = -EBUSY; goto err0; } tspi->phys = r->start; - tspi->base = ioremap(r->start, r->end - r->start + 1); + tspi->base = ioremap(r->start, resource_size(r)); if (!tspi->base) { dev_err(&pdev->dev, "can't ioremap iomem\n"); ret = -ENOMEM; @@ -546,6 +546,7 @@ static int __init spi_tegra_probe(struct platform_device *pdev) tspi->rx_dma_req.req_sel = spi_tegra_req_sels[pdev->id]; tspi->rx_dma_req.dev = tspi; + master->dev.of_node = pdev->dev.of_node; ret = spi_register_master(master); if (ret < 0) @@ -563,7 +564,7 @@ err3: err2: iounmap(tspi->base); err1: - release_mem_region(r->start, (r->end - r->start) + 1); + release_mem_region(r->start, resource_size(r)); err0: spi_master_put(master); return ret; @@ -588,17 +589,28 @@ static int __devexit spi_tegra_remove(struct platform_device *pdev) iounmap(tspi->base); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, (r->end - r->start) + 1); + release_mem_region(r->start, resource_size(r)); return 0; } MODULE_ALIAS("platform:spi_tegra"); +#ifdef CONFIG_OF +static struct of_device_id spi_tegra_of_match_table[] __devinitdata = { + { .compatible = "nvidia,tegra20-spi", }, + {} +}; +MODULE_DEVICE_TABLE(of, spi_tegra_of_match_table); +#else /* CONFIG_OF */ +#define spi_tegra_of_match_table NULL +#endif /* CONFIG_OF */ + static struct platform_driver spi_tegra_driver = { .driver = { .name = "spi_tegra", .owner = THIS_MODULE, + .of_match_table = spi_tegra_of_match_table, }, .remove = __devexit_p(spi_tegra_remove), }; diff --git a/drivers/spi/ti-ssp-spi.c b/drivers/spi/spi-ti-ssp.c index ee22795..ee22795 100644 --- a/drivers/spi/ti-ssp-spi.c +++ b/drivers/spi/spi-ti-ssp.c diff --git a/drivers/spi/tle62x0.c b/drivers/spi/spi-tle62x0.c index 32a4087..940e73d 100644 --- a/drivers/spi/tle62x0.c +++ b/drivers/spi/spi-tle62x0.c @@ -1,5 +1,5 @@ /* - * tle62x0.c -- support Infineon TLE62x0 driver chips + * Support Infineon TLE62x0 driver chips * * Copyright (c) 2007 Simtec Electronics * Ben Dooks, <ben@simtec.co.uk> diff --git a/drivers/spi/spi_topcliff_pch.c b/drivers/spi/spi-topcliff-pch.c index 79e48d4..1d23f38 100644 --- a/drivers/spi/spi_topcliff_pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -26,6 +26,10 @@ #include <linux/spi/spidev.h> #include <linux/module.h> #include <linux/device.h> +#include <linux/platform_device.h> + +#include <linux/dmaengine.h> +#include <linux/pch_dma.h> /* Register offsets */ #define PCH_SPCR 0x00 /* SPI control register */ @@ -35,6 +39,7 @@ #define PCH_SPDRR 0x10 /* SPI read data register */ #define PCH_SSNXCR 0x18 /* SSN Expand Control Register */ #define PCH_SRST 0x1C /* SPI reset register */ +#define PCH_ADDRESS_SIZE 0x20 #define PCH_SPSR_TFD 0x000007C0 #define PCH_SPSR_RFD 0x0000F800 @@ -52,8 +57,6 @@ #define STATUS_EXITING 2 #define PCH_SLEEP_TIME 10 -#define PCH_ADDRESS_SIZE 0x20 - #define SSN_LOW 0x02U #define SSN_NO_CONTROL 0x00U #define PCH_MAX_CS 0xFF @@ -73,22 +76,57 @@ #define SPSR_TFI_BIT (1 << 0) #define SPSR_RFI_BIT (1 << 1) #define SPSR_FI_BIT (1 << 2) +#define SPSR_ORF_BIT (1 << 3) #define SPBRR_SIZE_BIT (1 << 10) -#define PCH_ALL (SPCR_TFIE_BIT|SPCR_RFIE_BIT|SPCR_FIE_BIT|SPCR_ORIE_BIT|SPCR_MDFIE_BIT) +#define PCH_ALL (SPCR_TFIE_BIT|SPCR_RFIE_BIT|SPCR_FIE_BIT|\ + SPCR_ORIE_BIT|SPCR_MDFIE_BIT) #define SPCR_RFIC_FIELD 20 #define SPCR_TFIC_FIELD 16 -#define SPSR_INT_BITS 0x1F -#define MASK_SPBRR_SPBR_BITS (~((1 << 10) - 1)) -#define MASK_RFIC_SPCR_BITS (~(0xf << 20)) -#define MASK_TFIC_SPCR_BITS (~(0xf000f << 12)) +#define MASK_SPBRR_SPBR_BITS ((1 << 10) - 1) +#define MASK_RFIC_SPCR_BITS (0xf << SPCR_RFIC_FIELD) +#define MASK_TFIC_SPCR_BITS (0xf << SPCR_TFIC_FIELD) #define PCH_CLOCK_HZ 50000000 #define PCH_MAX_SPBR 1023 +/* Definition for ML7213 by OKI SEMICONDUCTOR */ +#define PCI_VENDOR_ID_ROHM 0x10DB +#define PCI_DEVICE_ID_ML7213_SPI 0x802c +#define PCI_DEVICE_ID_ML7223_SPI 0x800F +/* + * Set the number of SPI instance max + * Intel EG20T PCH : 1ch + * OKI SEMICONDUCTOR ML7213 IOH : 2ch + * OKI SEMICONDUCTOR ML7223 IOH : 1ch +*/ +#define PCH_SPI_MAX_DEV 2 + +#define PCH_BUF_SIZE 4096 +#define PCH_DMA_TRANS_SIZE 12 + +static int use_dma = 1; + +struct pch_spi_dma_ctrl { + struct dma_async_tx_descriptor *desc_tx; + struct dma_async_tx_descriptor *desc_rx; + struct pch_dma_slave param_tx; + struct pch_dma_slave param_rx; + struct dma_chan *chan_tx; + struct dma_chan *chan_rx; + struct scatterlist *sg_tx_p; + struct scatterlist *sg_rx_p; + struct scatterlist sg_tx; + struct scatterlist sg_rx; + int nent; + void *tx_buf_virt; + void *rx_buf_virt; + dma_addr_t tx_buf_dma; + dma_addr_t rx_buf_dma; +}; /** * struct pch_spi_data - Holds the SPI channel specific details * @io_remap_addr: The remapped PCI base address @@ -121,9 +159,13 @@ * @cur_trans: The current transfer that this SPI driver is * handling * @board_dat: Reference to the SPI device data structure + * @plat_dev: platform_device structure + * @ch: SPI channel number + * @irq_reg_sts: Status of IRQ registration */ struct pch_spi_data { void __iomem *io_remap_addr; + unsigned long io_base_addr; struct spi_master *master; struct work_struct work; struct workqueue_struct *wk; @@ -144,27 +186,36 @@ struct pch_spi_data { struct spi_message *current_msg; struct spi_transfer *cur_trans; struct pch_spi_board_data *board_dat; + struct platform_device *plat_dev; + int ch; + struct pch_spi_dma_ctrl dma; + int use_dma; + u8 irq_reg_sts; }; /** * struct pch_spi_board_data - Holds the SPI device specific details * @pdev: Pointer to the PCI device - * @irq_reg_sts: Status of IRQ registration - * @pci_req_sts: Status of pci_request_regions * @suspend_sts: Status of suspend - * @data: Pointer to SPI channel data structure + * @num: The number of SPI device instance */ struct pch_spi_board_data { struct pci_dev *pdev; - u8 irq_reg_sts; - u8 pci_req_sts; u8 suspend_sts; - struct pch_spi_data *data; + int num; +}; + +struct pch_pd_dev_save { + int num; + struct platform_device *pd_save[PCH_SPI_MAX_DEV]; + struct pch_spi_board_data *board_dat; }; static struct pci_device_id pch_spi_pcidev_id[] = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_GE_SPI)}, - {0,} + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_GE_SPI), 1, }, + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_SPI), 2, }, + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_SPI), 1, }, + { } }; /** @@ -251,10 +302,10 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val, reg_spcr_val &= ~SPCR_RFIE_BIT; /* disable RFI */ /* reset rx threshold */ - reg_spcr_val &= MASK_RFIC_SPCR_BITS; + reg_spcr_val &= ~MASK_RFIC_SPCR_BITS; reg_spcr_val |= (PCH_RX_THOLD_MAX << SPCR_RFIC_FIELD); - iowrite32(((reg_spcr_val) &= (~(SPCR_RFIE_BIT))), - (io_remap_addr + PCH_SPCR)); + + iowrite32(reg_spcr_val, (io_remap_addr + PCH_SPCR)); } /* update counts */ @@ -265,12 +316,15 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val, /* if transfer complete interrupt */ if (reg_spsr_val & SPSR_FI_BIT) { - /* disable FI & RFI interrupts */ - pch_spi_setclr_reg(data->master, PCH_SPCR, 0, - SPCR_FIE_BIT | SPCR_RFIE_BIT); + if (tx_index < bpw_len) + dev_err(&data->master->dev, + "%s : Transfer is not completed", __func__); + /* disable interrupts */ + pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL); /* transfer is completed;inform pch_spi_process_messages */ data->transfer_complete = true; + data->transfer_active = false; wake_up(&data->wait); } } @@ -283,24 +337,28 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val, static irqreturn_t pch_spi_handler(int irq, void *dev_id) { u32 reg_spsr_val; - struct pch_spi_data *data; void __iomem *spsr; void __iomem *io_remap_addr; irqreturn_t ret = IRQ_NONE; - struct pch_spi_board_data *board_dat = dev_id; + struct pch_spi_data *data = dev_id; + struct pch_spi_board_data *board_dat = data->board_dat; if (board_dat->suspend_sts) { dev_dbg(&board_dat->pdev->dev, "%s returning due to suspend\n", __func__); return IRQ_NONE; } + if (data->use_dma) + return IRQ_NONE; - data = board_dat->data; io_remap_addr = data->io_remap_addr; spsr = io_remap_addr + PCH_SPSR; reg_spsr_val = ioread32(spsr); + if (reg_spsr_val & SPSR_ORF_BIT) + dev_err(&board_dat->pdev->dev, "%s Over run error", __func__); + /* Check if the interrupt is for SPI device */ if (reg_spsr_val & (SPSR_FI_BIT | SPSR_RFI_BIT)) { pch_spi_handler_sub(data, reg_spsr_val, io_remap_addr); @@ -326,7 +384,7 @@ static void pch_spi_set_baud_rate(struct spi_master *master, u32 speed_hz) if (n_spbr > PCH_MAX_SPBR) n_spbr = PCH_MAX_SPBR; - pch_spi_setclr_reg(master, PCH_SPBRR, n_spbr, ~MASK_SPBRR_SPBR_BITS); + pch_spi_setclr_reg(master, PCH_SPBRR, n_spbr, MASK_SPBRR_SPBR_BITS); } /** @@ -435,26 +493,27 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) dev_dbg(&pspi->dev, "%s Transfer List not empty. " "Transfer Speed is set.\n", __func__); + spin_lock_irqsave(&data->lock, flags); /* validate Tx/Rx buffers and Transfer length */ list_for_each_entry(transfer, &pmsg->transfers, transfer_list) { if (!transfer->tx_buf && !transfer->rx_buf) { dev_err(&pspi->dev, "%s Tx and Rx buffer NULL\n", __func__); retval = -EINVAL; - goto err_out; + goto err_return_spinlock; } if (!transfer->len) { dev_err(&pspi->dev, "%s Transfer length invalid\n", __func__); retval = -EINVAL; - goto err_out; + goto err_return_spinlock; } dev_dbg(&pspi->dev, "%s Tx/Rx buffer valid. Transfer length" " valid\n", __func__); - /* if baud rate hs been specified validate the same */ + /* if baud rate has been specified validate the same */ if (transfer->speed_hz > PCH_MAX_BAUDRATE) transfer->speed_hz = PCH_MAX_BAUDRATE; @@ -465,25 +524,24 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) retval = -EINVAL; dev_err(&pspi->dev, "%s Invalid bits per word\n", __func__); - goto err_out; + goto err_return_spinlock; } } } - - spin_lock_irqsave(&data->lock, flags); + spin_unlock_irqrestore(&data->lock, flags); /* We won't process any messages if we have been asked to terminate */ if (data->status == STATUS_EXITING) { dev_err(&pspi->dev, "%s status = STATUS_EXITING.\n", __func__); retval = -ESHUTDOWN; - goto err_return_spinlock; + goto err_out; } /* If suspended ,return -EINVAL */ if (data->board_dat->suspend_sts) { dev_err(&pspi->dev, "%s suspend; returning EINVAL\n", __func__); retval = -EINVAL; - goto err_return_spinlock; + goto err_out; } /* set status of message */ @@ -491,9 +549,11 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) dev_dbg(&pspi->dev, "%s - pmsg->status =%d\n", __func__, pmsg->status); pmsg->status = -EINPROGRESS; - + spin_lock_irqsave(&data->lock, flags); /* add message to queue */ list_add_tail(&pmsg->queue, &data->queue); + spin_unlock_irqrestore(&data->lock, flags); + dev_dbg(&pspi->dev, "%s - Invoked list_add_tail\n", __func__); /* schedule work queue to run */ @@ -502,11 +562,13 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) retval = 0; -err_return_spinlock: - spin_unlock_irqrestore(&data->lock, flags); err_out: dev_dbg(&pspi->dev, "%s RETURN=%d\n", __func__, retval); return retval; +err_return_spinlock: + dev_dbg(&pspi->dev, "%s RETURN=%d\n", __func__, retval); + spin_unlock_irqrestore(&data->lock, flags); + return retval; } static inline void pch_spi_select_chip(struct pch_spi_data *data, @@ -527,8 +589,7 @@ static inline void pch_spi_select_chip(struct pch_spi_data *data, pch_spi_setup_transfer(pspi); } -static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw, - struct spi_message **ppmsg) +static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw) { int size; u32 n_writes; @@ -537,8 +598,6 @@ static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw, const u8 *tx_buf; const u16 *tx_sbuf; - pmsg = *ppmsg; - /* set baud rate if needed */ if (data->cur_trans->speed_hz) { dev_dbg(&data->master->dev, "%s:setting baud rate\n", __func__); @@ -621,10 +680,9 @@ static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw, data->transfer_active = true; } - -static void pch_spi_nomore_transfer(struct pch_spi_data *data, - struct spi_message *pmsg) +static void pch_spi_nomore_transfer(struct pch_spi_data *data) { + struct spi_message *pmsg; dev_dbg(&data->master->dev, "%s called\n", __func__); /* Invoke complete callback * [To the spi core..indicating end of transfer] */ @@ -675,29 +733,21 @@ static void pch_spi_nomore_transfer(struct pch_spi_data *data, static void pch_spi_set_ir(struct pch_spi_data *data) { - /* enable interrupts */ - if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) { + /* enable interrupts, set threshold, enable SPI */ + if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) /* set receive threshold to PCH_RX_THOLD */ pch_spi_setclr_reg(data->master, PCH_SPCR, - PCH_RX_THOLD << SPCR_RFIC_FIELD, - ~MASK_RFIC_SPCR_BITS); - /* enable FI and RFI interrupts */ - pch_spi_setclr_reg(data->master, PCH_SPCR, - SPCR_RFIE_BIT | SPCR_FIE_BIT, 0); - } else { + PCH_RX_THOLD << SPCR_RFIC_FIELD | + SPCR_FIE_BIT | SPCR_RFIE_BIT | + SPCR_ORIE_BIT | SPCR_SPE_BIT, + MASK_RFIC_SPCR_BITS | PCH_ALL); + else /* set receive threshold to maximum */ pch_spi_setclr_reg(data->master, PCH_SPCR, - PCH_RX_THOLD_MAX << SPCR_TFIC_FIELD, - ~MASK_TFIC_SPCR_BITS); - /* enable FI interrupt */ - pch_spi_setclr_reg(data->master, PCH_SPCR, SPCR_FIE_BIT, 0); - } - - dev_dbg(&data->master->dev, - "%s:invoking pch_spi_set_enable to enable SPI\n", __func__); - - /* SPI set enable */ - pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, SPCR_SPE_BIT, 0); + PCH_RX_THOLD_MAX << SPCR_RFIC_FIELD | + SPCR_FIE_BIT | SPCR_ORIE_BIT | + SPCR_SPE_BIT, + MASK_RFIC_SPCR_BITS | PCH_ALL); /* Wait until the transfer completes; go to sleep after initiating the transfer. */ @@ -710,15 +760,13 @@ static void pch_spi_set_ir(struct pch_spi_data *data) dev_dbg(&data->master->dev, "%s:no more control over SSN-writing 0 to SSNXCR.", __func__); - data->transfer_active = false; - dev_dbg(&data->master->dev, - "%s set data->transfer_active = false\n", __func__); - /* clear all interrupts */ pch_spi_writereg(data->master, PCH_SPSR, pch_spi_readreg(data->master, PCH_SPSR)); - /* disable interrupts */ - pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL); + /* Disable interrupts and SPI transfer */ + pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL | SPCR_SPE_BIT); + /* clear FIFO */ + pch_spi_clear_fifo(data->master); } static void pch_spi_copy_rx_data(struct pch_spi_data *data, int bpw) @@ -742,6 +790,327 @@ static void pch_spi_copy_rx_data(struct pch_spi_data *data, int bpw) } } +static void pch_spi_copy_rx_data_for_dma(struct pch_spi_data *data, int bpw) +{ + int j; + u8 *rx_buf; + u16 *rx_sbuf; + const u8 *rx_dma_buf; + const u16 *rx_dma_sbuf; + + /* copy Rx Data */ + if (!data->cur_trans->rx_buf) + return; + + if (bpw == 8) { + rx_buf = data->cur_trans->rx_buf; + rx_dma_buf = data->dma.rx_buf_virt; + for (j = 0; j < data->bpw_len; j++) + *rx_buf++ = *rx_dma_buf++ & 0xFF; + } else { + rx_sbuf = data->cur_trans->rx_buf; + rx_dma_sbuf = data->dma.rx_buf_virt; + for (j = 0; j < data->bpw_len; j++) + *rx_sbuf++ = *rx_dma_sbuf++; + } +} + +static void pch_spi_start_transfer(struct pch_spi_data *data) +{ + struct pch_spi_dma_ctrl *dma; + unsigned long flags; + + dma = &data->dma; + + spin_lock_irqsave(&data->lock, flags); + + /* disable interrupts, SPI set enable */ + pch_spi_setclr_reg(data->master, PCH_SPCR, SPCR_SPE_BIT, PCH_ALL); + + spin_unlock_irqrestore(&data->lock, flags); + + /* Wait until the transfer completes; go to sleep after + initiating the transfer. */ + dev_dbg(&data->master->dev, + "%s:waiting for transfer to get over\n", __func__); + wait_event_interruptible(data->wait, data->transfer_complete); + + dma_sync_sg_for_cpu(&data->master->dev, dma->sg_rx_p, dma->nent, + DMA_FROM_DEVICE); + async_tx_ack(dma->desc_rx); + async_tx_ack(dma->desc_tx); + kfree(dma->sg_tx_p); + kfree(dma->sg_rx_p); + + spin_lock_irqsave(&data->lock, flags); + pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL); + dev_dbg(&data->master->dev, + "%s:no more control over SSN-writing 0 to SSNXCR.", __func__); + + /* clear fifo threshold, disable interrupts, disable SPI transfer */ + pch_spi_setclr_reg(data->master, PCH_SPCR, 0, + MASK_RFIC_SPCR_BITS | MASK_TFIC_SPCR_BITS | PCH_ALL | + SPCR_SPE_BIT); + /* clear all interrupts */ + pch_spi_writereg(data->master, PCH_SPSR, + pch_spi_readreg(data->master, PCH_SPSR)); + /* clear FIFO */ + pch_spi_clear_fifo(data->master); + + spin_unlock_irqrestore(&data->lock, flags); +} + +static void pch_dma_rx_complete(void *arg) +{ + struct pch_spi_data *data = arg; + + /* transfer is completed;inform pch_spi_process_messages_dma */ + data->transfer_complete = true; + wake_up_interruptible(&data->wait); +} + +static bool pch_spi_filter(struct dma_chan *chan, void *slave) +{ + struct pch_dma_slave *param = slave; + + if ((chan->chan_id == param->chan_id) && + (param->dma_dev == chan->device->dev)) { + chan->private = param; + return true; + } else { + return false; + } +} + +static void pch_spi_request_dma(struct pch_spi_data *data, int bpw) +{ + dma_cap_mask_t mask; + struct dma_chan *chan; + struct pci_dev *dma_dev; + struct pch_dma_slave *param; + struct pch_spi_dma_ctrl *dma; + unsigned int width; + + if (bpw == 8) + width = PCH_DMA_WIDTH_1_BYTE; + else + width = PCH_DMA_WIDTH_2_BYTES; + + dma = &data->dma; + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* Get DMA's dev information */ + dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(12, 0)); + + /* Set Tx DMA */ + param = &dma->param_tx; + param->dma_dev = &dma_dev->dev; + param->chan_id = data->master->bus_num * 2; /* Tx = 0, 2 */ + param->tx_reg = data->io_base_addr + PCH_SPDWR; + param->width = width; + chan = dma_request_channel(mask, pch_spi_filter, param); + if (!chan) { + dev_err(&data->master->dev, + "ERROR: dma_request_channel FAILS(Tx)\n"); + data->use_dma = 0; + return; + } + dma->chan_tx = chan; + + /* Set Rx DMA */ + param = &dma->param_rx; + param->dma_dev = &dma_dev->dev; + param->chan_id = data->master->bus_num * 2 + 1; /* Rx = Tx + 1 */ + param->rx_reg = data->io_base_addr + PCH_SPDRR; + param->width = width; + chan = dma_request_channel(mask, pch_spi_filter, param); + if (!chan) { + dev_err(&data->master->dev, + "ERROR: dma_request_channel FAILS(Rx)\n"); + dma_release_channel(dma->chan_tx); + dma->chan_tx = NULL; + data->use_dma = 0; + return; + } + dma->chan_rx = chan; +} + +static void pch_spi_release_dma(struct pch_spi_data *data) +{ + struct pch_spi_dma_ctrl *dma; + + dma = &data->dma; + if (dma->chan_tx) { + dma_release_channel(dma->chan_tx); + dma->chan_tx = NULL; + } + if (dma->chan_rx) { + dma_release_channel(dma->chan_rx); + dma->chan_rx = NULL; + } + return; +} + +static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw) +{ + const u8 *tx_buf; + const u16 *tx_sbuf; + u8 *tx_dma_buf; + u16 *tx_dma_sbuf; + struct scatterlist *sg; + struct dma_async_tx_descriptor *desc_tx; + struct dma_async_tx_descriptor *desc_rx; + int num; + int i; + int size; + int rem; + unsigned long flags; + struct pch_spi_dma_ctrl *dma; + + dma = &data->dma; + + /* set baud rate if needed */ + if (data->cur_trans->speed_hz) { + dev_dbg(&data->master->dev, "%s:setting baud rate\n", __func__); + spin_lock_irqsave(&data->lock, flags); + pch_spi_set_baud_rate(data->master, data->cur_trans->speed_hz); + spin_unlock_irqrestore(&data->lock, flags); + } + + /* set bits per word if needed */ + if (data->cur_trans->bits_per_word && + (data->current_msg->spi->bits_per_word != + data->cur_trans->bits_per_word)) { + dev_dbg(&data->master->dev, "%s:set bits per word\n", __func__); + spin_lock_irqsave(&data->lock, flags); + pch_spi_set_bits_per_word(data->master, + data->cur_trans->bits_per_word); + spin_unlock_irqrestore(&data->lock, flags); + *bpw = data->cur_trans->bits_per_word; + } else { + *bpw = data->current_msg->spi->bits_per_word; + } + data->bpw_len = data->cur_trans->len / (*bpw / 8); + + /* copy Tx Data */ + if (data->cur_trans->tx_buf != NULL) { + if (*bpw == 8) { + tx_buf = data->cur_trans->tx_buf; + tx_dma_buf = dma->tx_buf_virt; + for (i = 0; i < data->bpw_len; i++) + *tx_dma_buf++ = *tx_buf++; + } else { + tx_sbuf = data->cur_trans->tx_buf; + tx_dma_sbuf = dma->tx_buf_virt; + for (i = 0; i < data->bpw_len; i++) + *tx_dma_sbuf++ = *tx_sbuf++; + } + } + if (data->bpw_len > PCH_DMA_TRANS_SIZE) { + num = data->bpw_len / PCH_DMA_TRANS_SIZE + 1; + size = PCH_DMA_TRANS_SIZE; + rem = data->bpw_len % PCH_DMA_TRANS_SIZE; + } else { + num = 1; + size = data->bpw_len; + rem = data->bpw_len; + } + dev_dbg(&data->master->dev, "%s num=%d size=%d rem=%d\n", + __func__, num, size, rem); + spin_lock_irqsave(&data->lock, flags); + + /* set receive fifo threshold and transmit fifo threshold */ + pch_spi_setclr_reg(data->master, PCH_SPCR, + ((size - 1) << SPCR_RFIC_FIELD) | + ((PCH_MAX_FIFO_DEPTH - PCH_DMA_TRANS_SIZE) << + SPCR_TFIC_FIELD), + MASK_RFIC_SPCR_BITS | MASK_TFIC_SPCR_BITS); + + spin_unlock_irqrestore(&data->lock, flags); + + /* RX */ + dma->sg_rx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC); + sg_init_table(dma->sg_rx_p, num); /* Initialize SG table */ + /* offset, length setting */ + sg = dma->sg_rx_p; + for (i = 0; i < num; i++, sg++) { + if (i == 0) { + sg->offset = 0; + sg_set_page(sg, virt_to_page(dma->rx_buf_virt), rem, + sg->offset); + sg_dma_len(sg) = rem; + } else { + sg->offset = rem + size * (i - 1); + sg->offset = sg->offset * (*bpw / 8); + sg_set_page(sg, virt_to_page(dma->rx_buf_virt), size, + sg->offset); + sg_dma_len(sg) = size; + } + sg_dma_address(sg) = dma->rx_buf_dma + sg->offset; + } + sg = dma->sg_rx_p; + desc_rx = dma->chan_rx->device->device_prep_slave_sg(dma->chan_rx, sg, + num, DMA_FROM_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc_rx) { + dev_err(&data->master->dev, "%s:device_prep_slave_sg Failed\n", + __func__); + return; + } + dma_sync_sg_for_device(&data->master->dev, sg, num, DMA_FROM_DEVICE); + desc_rx->callback = pch_dma_rx_complete; + desc_rx->callback_param = data; + dma->nent = num; + dma->desc_rx = desc_rx; + + /* TX */ + dma->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC); + sg_init_table(dma->sg_tx_p, num); /* Initialize SG table */ + /* offset, length setting */ + sg = dma->sg_tx_p; + for (i = 0; i < num; i++, sg++) { + if (i == 0) { + sg->offset = 0; + sg_set_page(sg, virt_to_page(dma->tx_buf_virt), rem, + sg->offset); + sg_dma_len(sg) = rem; + } else { + sg->offset = rem + size * (i - 1); + sg->offset = sg->offset * (*bpw / 8); + sg_set_page(sg, virt_to_page(dma->tx_buf_virt), size, + sg->offset); + sg_dma_len(sg) = size; + } + sg_dma_address(sg) = dma->tx_buf_dma + sg->offset; + } + sg = dma->sg_tx_p; + desc_tx = dma->chan_tx->device->device_prep_slave_sg(dma->chan_tx, + sg, num, DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc_tx) { + dev_err(&data->master->dev, "%s:device_prep_slave_sg Failed\n", + __func__); + return; + } + dma_sync_sg_for_device(&data->master->dev, sg, num, DMA_TO_DEVICE); + desc_tx->callback = NULL; + desc_tx->callback_param = data; + dma->nent = num; + dma->desc_tx = desc_tx; + + dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing " + "0x2 to SSNXCR\n", __func__); + + spin_lock_irqsave(&data->lock, flags); + pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW); + desc_rx->tx_submit(desc_rx); + desc_tx->tx_submit(desc_tx); + spin_unlock_irqrestore(&data->lock, flags); + + /* reset transfer complete flag */ + data->transfer_complete = false; +} static void pch_spi_process_messages(struct work_struct *pwork) { @@ -753,13 +1122,10 @@ static void pch_spi_process_messages(struct work_struct *pwork) dev_dbg(&data->master->dev, "%s data initialized\n", __func__); spin_lock(&data->lock); - /* check if suspend has been initiated;if yes flush queue */ if (data->board_dat->suspend_sts || (data->status == STATUS_EXITING)) { - dev_dbg(&data->master->dev, - "%s suspend/remove initiated,flushing queue\n", - __func__); - + dev_dbg(&data->master->dev, "%s suspend/remove initiated," + "flushing queue\n", __func__); list_for_each_entry(pmsg, data->queue.next, queue) { pmsg->status = -EIO; @@ -793,53 +1159,42 @@ static void pch_spi_process_messages(struct work_struct *pwork) spin_unlock(&data->lock); + if (data->use_dma) + pch_spi_request_dma(data, + data->current_msg->spi->bits_per_word); do { /* If we are already processing a message get the next transfer structure from the message otherwise retrieve the 1st transfer request from the message. */ spin_lock(&data->lock); - if (data->cur_trans == NULL) { data->cur_trans = - list_entry(data->current_msg->transfers. - next, struct spi_transfer, - transfer_list); - dev_dbg(&data->master->dev, - "%s :Getting 1st transfer message\n", __func__); + list_entry(data->current_msg->transfers.next, + struct spi_transfer, transfer_list); + dev_dbg(&data->master->dev, "%s " + ":Getting 1st transfer message\n", __func__); } else { data->cur_trans = - list_entry(data->cur_trans->transfer_list.next, - struct spi_transfer, - transfer_list); - dev_dbg(&data->master->dev, - "%s :Getting next transfer message\n", - __func__); + list_entry(data->cur_trans->transfer_list.next, + struct spi_transfer, transfer_list); + dev_dbg(&data->master->dev, "%s " + ":Getting next transfer message\n", __func__); } - spin_unlock(&data->lock); - pch_spi_set_tx(data, &bpw, &pmsg); - - /* Control interrupt*/ - pch_spi_set_ir(data); - - /* Disable SPI transfer */ - pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, 0, - SPCR_SPE_BIT); - - /* clear FIFO */ - pch_spi_clear_fifo(data->master); - - /* copy Rx Data */ - pch_spi_copy_rx_data(data, bpw); - - /* free memory */ - kfree(data->pkt_rx_buff); - data->pkt_rx_buff = NULL; - - kfree(data->pkt_tx_buff); - data->pkt_tx_buff = NULL; - + if (data->use_dma) { + pch_spi_handle_dma(data, &bpw); + pch_spi_start_transfer(data); + pch_spi_copy_rx_data_for_dma(data, bpw); + } else { + pch_spi_set_tx(data, &bpw); + pch_spi_set_ir(data); + pch_spi_copy_rx_data(data, bpw); + kfree(data->pkt_rx_buff); + data->pkt_rx_buff = NULL; + kfree(data->pkt_tx_buff); + data->pkt_tx_buff = NULL; + } /* increment message count */ data->current_msg->actual_length += data->cur_trans->len; @@ -860,125 +1215,60 @@ static void pch_spi_process_messages(struct work_struct *pwork) /* No more transfer in this message. */ if ((data->cur_trans->transfer_list.next) == &(data->current_msg->transfers)) { - pch_spi_nomore_transfer(data, pmsg); + pch_spi_nomore_transfer(data); } spin_unlock(&data->lock); } while (data->cur_trans != NULL); + + if (data->use_dma) + pch_spi_release_dma(data); } -static void pch_spi_free_resources(struct pch_spi_board_data *board_dat) +static void pch_spi_free_resources(struct pch_spi_board_data *board_dat, + struct pch_spi_data *data) { dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__); /* free workqueue */ - if (board_dat->data->wk != NULL) { - destroy_workqueue(board_dat->data->wk); - board_dat->data->wk = NULL; + if (data->wk != NULL) { + destroy_workqueue(data->wk); + data->wk = NULL; dev_dbg(&board_dat->pdev->dev, "%s destroy_workqueue invoked successfully\n", __func__); } - - /* disable interrupts & free IRQ */ - if (board_dat->irq_reg_sts) { - /* disable interrupts */ - pch_spi_setclr_reg(board_dat->data->master, PCH_SPCR, 0, - PCH_ALL); - - /* free IRQ */ - free_irq(board_dat->pdev->irq, board_dat); - - dev_dbg(&board_dat->pdev->dev, - "%s free_irq invoked successfully\n", __func__); - - board_dat->irq_reg_sts = false; - } - - /* unmap PCI base address */ - if (board_dat->data->io_remap_addr != 0) { - pci_iounmap(board_dat->pdev, board_dat->data->io_remap_addr); - - board_dat->data->io_remap_addr = 0; - - dev_dbg(&board_dat->pdev->dev, - "%s pci_iounmap invoked successfully\n", __func__); - } - - /* release PCI region */ - if (board_dat->pci_req_sts) { - pci_release_regions(board_dat->pdev); - dev_dbg(&board_dat->pdev->dev, - "%s pci_release_regions invoked successfully\n", - __func__); - board_dat->pci_req_sts = false; - } } -static int pch_spi_get_resources(struct pch_spi_board_data *board_dat) +static int pch_spi_get_resources(struct pch_spi_board_data *board_dat, + struct pch_spi_data *data) { - void __iomem *io_remap_addr; - int retval; + int retval = 0; + dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__); /* create workqueue */ - board_dat->data->wk = create_singlethread_workqueue(KBUILD_MODNAME); - if (!board_dat->data->wk) { + data->wk = create_singlethread_workqueue(KBUILD_MODNAME); + if (!data->wk) { dev_err(&board_dat->pdev->dev, "%s create_singlet hread_workqueue failed\n", __func__); retval = -EBUSY; goto err_return; } - dev_dbg(&board_dat->pdev->dev, - "%s create_singlethread_workqueue success\n", __func__); - - retval = pci_request_regions(board_dat->pdev, KBUILD_MODNAME); - if (retval != 0) { - dev_err(&board_dat->pdev->dev, - "%s request_region failed\n", __func__); - goto err_return; - } - - board_dat->pci_req_sts = true; - - io_remap_addr = pci_iomap(board_dat->pdev, 1, 0); - if (io_remap_addr == 0) { - dev_err(&board_dat->pdev->dev, - "%s pci_iomap failed\n", __func__); - retval = -ENOMEM; - goto err_return; - } - - /* calculate base address for all channels */ - board_dat->data->io_remap_addr = io_remap_addr; - /* reset PCH SPI h/w */ - pch_spi_reset(board_dat->data->master); + pch_spi_reset(data->master); dev_dbg(&board_dat->pdev->dev, "%s pch_spi_reset invoked successfully\n", __func__); - /* register IRQ */ - retval = request_irq(board_dat->pdev->irq, pch_spi_handler, - IRQF_SHARED, KBUILD_MODNAME, board_dat); - if (retval != 0) { - dev_err(&board_dat->pdev->dev, - "%s request_irq failed\n", __func__); - goto err_return; - } - - dev_dbg(&board_dat->pdev->dev, "%s request_irq returned=%d\n", - __func__, retval); - - board_dat->irq_reg_sts = true; dev_dbg(&board_dat->pdev->dev, "%s data->irq_reg_sts=true\n", __func__); err_return: if (retval != 0) { dev_err(&board_dat->pdev->dev, "%s FAIL:invoking pch_spi_free_resources\n", __func__); - pch_spi_free_resources(board_dat); + pch_spi_free_resources(board_dat, data); } dev_dbg(&board_dat->pdev->dev, "%s Return=%d\n", __func__, retval); @@ -986,255 +1276,387 @@ err_return: return retval; } -static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id) +static void pch_free_dma_buf(struct pch_spi_board_data *board_dat, + struct pch_spi_data *data) { + struct pch_spi_dma_ctrl *dma; + + dma = &data->dma; + if (dma->tx_buf_dma) + dma_free_coherent(&board_dat->pdev->dev, PCH_BUF_SIZE, + dma->tx_buf_virt, dma->tx_buf_dma); + if (dma->rx_buf_dma) + dma_free_coherent(&board_dat->pdev->dev, PCH_BUF_SIZE, + dma->rx_buf_virt, dma->rx_buf_dma); + return; +} - struct spi_master *master; - - struct pch_spi_board_data *board_dat; - int retval; - - dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); - - /* allocate memory for private data */ - board_dat = kzalloc(sizeof(struct pch_spi_board_data), GFP_KERNEL); - if (board_dat == NULL) { - dev_err(&pdev->dev, - " %s memory allocation for private data failed\n", - __func__); - retval = -ENOMEM; - goto err_kmalloc; - } +static void pch_alloc_dma_buf(struct pch_spi_board_data *board_dat, + struct pch_spi_data *data) +{ + struct pch_spi_dma_ctrl *dma; + + dma = &data->dma; + /* Get Consistent memory for Tx DMA */ + dma->tx_buf_virt = dma_alloc_coherent(&board_dat->pdev->dev, + PCH_BUF_SIZE, &dma->tx_buf_dma, GFP_KERNEL); + /* Get Consistent memory for Rx DMA */ + dma->rx_buf_virt = dma_alloc_coherent(&board_dat->pdev->dev, + PCH_BUF_SIZE, &dma->rx_buf_dma, GFP_KERNEL); +} - dev_dbg(&pdev->dev, - "%s memory allocation for private data success\n", __func__); +static int __devinit pch_spi_pd_probe(struct platform_device *plat_dev) +{ + int ret; + struct spi_master *master; + struct pch_spi_board_data *board_dat = dev_get_platdata(&plat_dev->dev); + struct pch_spi_data *data; - /* enable PCI device */ - retval = pci_enable_device(pdev); - if (retval != 0) { - dev_err(&pdev->dev, "%s pci_enable_device FAILED\n", __func__); + dev_dbg(&plat_dev->dev, "%s:debug\n", __func__); - goto err_pci_en_device; + master = spi_alloc_master(&board_dat->pdev->dev, + sizeof(struct pch_spi_data)); + if (!master) { + dev_err(&plat_dev->dev, "spi_alloc_master[%d] failed.\n", + plat_dev->id); + return -ENOMEM; } - dev_dbg(&pdev->dev, "%s pci_enable_device returned=%d\n", - __func__, retval); + data = spi_master_get_devdata(master); + data->master = master; - board_dat->pdev = pdev; + platform_set_drvdata(plat_dev, data); - /* alllocate memory for SPI master */ - master = spi_alloc_master(&pdev->dev, sizeof(struct pch_spi_data)); - if (master == NULL) { - retval = -ENOMEM; - dev_err(&pdev->dev, "%s Fail.\n", __func__); - goto err_spi_alloc_master; + /* baseaddress + address offset) */ + data->io_base_addr = pci_resource_start(board_dat->pdev, 1) + + PCH_ADDRESS_SIZE * plat_dev->id; + data->io_remap_addr = pci_iomap(board_dat->pdev, 1, 0) + + PCH_ADDRESS_SIZE * plat_dev->id; + if (!data->io_remap_addr) { + dev_err(&plat_dev->dev, "%s pci_iomap failed\n", __func__); + ret = -ENOMEM; + goto err_pci_iomap; } - dev_dbg(&pdev->dev, - "%s spi_alloc_master returned non NULL\n", __func__); + dev_dbg(&plat_dev->dev, "[ch%d] remap_addr=%p\n", + plat_dev->id, data->io_remap_addr); /* initialize members of SPI master */ master->bus_num = -1; master->num_chipselect = PCH_MAX_CS; master->setup = pch_spi_setup; master->transfer = pch_spi_transfer; - dev_dbg(&pdev->dev, - "%s transfer member of SPI master initialized\n", __func__); - - board_dat->data = spi_master_get_devdata(master); - - board_dat->data->master = master; - board_dat->data->n_curnt_chip = 255; - board_dat->data->board_dat = board_dat; - board_dat->data->status = STATUS_RUNNING; - - INIT_LIST_HEAD(&board_dat->data->queue); - spin_lock_init(&board_dat->data->lock); - INIT_WORK(&board_dat->data->work, pch_spi_process_messages); - init_waitqueue_head(&board_dat->data->wait); - /* allocate resources for PCH SPI */ - retval = pch_spi_get_resources(board_dat); - if (retval) { - dev_err(&pdev->dev, "%s fail(retval=%d)\n", __func__, retval); + data->board_dat = board_dat; + data->plat_dev = plat_dev; + data->n_curnt_chip = 255; + data->status = STATUS_RUNNING; + data->ch = plat_dev->id; + data->use_dma = use_dma; + + INIT_LIST_HEAD(&data->queue); + spin_lock_init(&data->lock); + INIT_WORK(&data->work, pch_spi_process_messages); + init_waitqueue_head(&data->wait); + + ret = pch_spi_get_resources(board_dat, data); + if (ret) { + dev_err(&plat_dev->dev, "%s fail(retval=%d)\n", __func__, ret); goto err_spi_get_resources; } - dev_dbg(&pdev->dev, "%s pch_spi_get_resources returned=%d\n", - __func__, retval); - - /* save private data in dev */ - pci_set_drvdata(pdev, board_dat); - dev_dbg(&pdev->dev, "%s invoked pci_set_drvdata\n", __func__); + ret = request_irq(board_dat->pdev->irq, pch_spi_handler, + IRQF_SHARED, KBUILD_MODNAME, data); + if (ret) { + dev_err(&plat_dev->dev, + "%s request_irq failed\n", __func__); + goto err_request_irq; + } + data->irq_reg_sts = true; - /* set master mode */ pch_spi_set_master_mode(master); - dev_dbg(&pdev->dev, - "%s invoked pch_spi_set_master_mode\n", __func__); - /* Register the controller with the SPI core. */ - retval = spi_register_master(master); - if (retval != 0) { - dev_err(&pdev->dev, + ret = spi_register_master(master); + if (ret != 0) { + dev_err(&plat_dev->dev, "%s spi_register_master FAILED\n", __func__); - goto err_spi_reg_master; + goto err_spi_register_master; } - dev_dbg(&pdev->dev, "%s spi_register_master returned=%d\n", - __func__, retval); - + if (use_dma) { + dev_info(&plat_dev->dev, "Use DMA for data transfers\n"); + pch_alloc_dma_buf(board_dat, data); + } return 0; -err_spi_reg_master: - spi_unregister_master(master); +err_spi_register_master: + free_irq(board_dat->pdev->irq, board_dat); +err_request_irq: + pch_spi_free_resources(board_dat, data); err_spi_get_resources: -err_spi_alloc_master: + pci_iounmap(board_dat->pdev, data->io_remap_addr); +err_pci_iomap: spi_master_put(master); - pci_disable_device(pdev); -err_pci_en_device: - kfree(board_dat); -err_kmalloc: - return retval; + + return ret; } -static void pch_spi_remove(struct pci_dev *pdev) +static int __devexit pch_spi_pd_remove(struct platform_device *plat_dev) { - struct pch_spi_board_data *board_dat = pci_get_drvdata(pdev); + struct pch_spi_board_data *board_dat = dev_get_platdata(&plat_dev->dev); + struct pch_spi_data *data = platform_get_drvdata(plat_dev); int count; + unsigned long flags; - dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + dev_dbg(&plat_dev->dev, "%s:[ch%d] irq=%d\n", + __func__, plat_dev->id, board_dat->pdev->irq); - if (!board_dat) { - dev_err(&pdev->dev, - "%s pci_get_drvdata returned NULL\n", __func__); - return; - } + if (use_dma) + pch_free_dma_buf(board_dat, data); /* check for any pending messages; no action is taken if the queue * is still full; but at least we tried. Unload anyway */ count = 500; - spin_lock(&board_dat->data->lock); - board_dat->data->status = STATUS_EXITING; - while ((list_empty(&board_dat->data->queue) == 0) && --count) { + spin_lock_irqsave(&data->lock, flags); + data->status = STATUS_EXITING; + while ((list_empty(&data->queue) == 0) && --count) { dev_dbg(&board_dat->pdev->dev, "%s :queue not empty\n", __func__); - spin_unlock(&board_dat->data->lock); + spin_unlock_irqrestore(&data->lock, flags); msleep(PCH_SLEEP_TIME); - spin_lock(&board_dat->data->lock); + spin_lock_irqsave(&data->lock, flags); } - spin_unlock(&board_dat->data->lock); - - /* Free resources allocated for PCH SPI */ - pch_spi_free_resources(board_dat); - - spi_unregister_master(board_dat->data->master); - - /* free memory for private data */ - kfree(board_dat); + spin_unlock_irqrestore(&data->lock, flags); - pci_set_drvdata(pdev, NULL); + pch_spi_free_resources(board_dat, data); + /* disable interrupts & free IRQ */ + if (data->irq_reg_sts) { + /* disable interrupts */ + pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL); + data->irq_reg_sts = false; + free_irq(board_dat->pdev->irq, data); + } - /* disable PCI device */ - pci_disable_device(pdev); + pci_iounmap(board_dat->pdev, data->io_remap_addr); + spi_unregister_master(data->master); + spi_master_put(data->master); + platform_set_drvdata(plat_dev, NULL); - dev_dbg(&pdev->dev, "%s invoked pci_disable_device\n", __func__); + return 0; } - #ifdef CONFIG_PM -static int pch_spi_suspend(struct pci_dev *pdev, pm_message_t state) +static int pch_spi_pd_suspend(struct platform_device *pd_dev, + pm_message_t state) { u8 count; - int retval; - - struct pch_spi_board_data *board_dat = pci_get_drvdata(pdev); + struct pch_spi_board_data *board_dat = dev_get_platdata(&pd_dev->dev); + struct pch_spi_data *data = platform_get_drvdata(pd_dev); - dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + dev_dbg(&pd_dev->dev, "%s ENTRY\n", __func__); if (!board_dat) { - dev_err(&pdev->dev, + dev_err(&pd_dev->dev, "%s pci_get_drvdata returned NULL\n", __func__); return -EFAULT; } - retval = 0; - board_dat->suspend_sts = true; - /* check if the current message is processed: Only after thats done the transfer will be suspended */ count = 255; while ((--count) > 0) { - if (!(board_dat->data->bcurrent_msg_processing)) { - dev_dbg(&pdev->dev, "%s board_dat->data->bCurrent_" - "msg_processing = false\n", __func__); + if (!(data->bcurrent_msg_processing)) break; - } else { - dev_dbg(&pdev->dev, "%s board_dat->data->bCurrent_msg_" - "processing = true\n", __func__); - } msleep(PCH_SLEEP_TIME); } /* Free IRQ */ - if (board_dat->irq_reg_sts) { + if (data->irq_reg_sts) { /* disable all interrupts */ - pch_spi_setclr_reg(board_dat->data->master, PCH_SPCR, 0, - PCH_ALL); - pch_spi_reset(board_dat->data->master); - - free_irq(board_dat->pdev->irq, board_dat); + pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL); + pch_spi_reset(data->master); + free_irq(board_dat->pdev->irq, data); - board_dat->irq_reg_sts = false; - dev_dbg(&pdev->dev, + data->irq_reg_sts = false; + dev_dbg(&pd_dev->dev, "%s free_irq invoked successfully.\n", __func__); } + return 0; +} + +static int pch_spi_pd_resume(struct platform_device *pd_dev) +{ + struct pch_spi_board_data *board_dat = dev_get_platdata(&pd_dev->dev); + struct pch_spi_data *data = platform_get_drvdata(pd_dev); + int retval; + + if (!board_dat) { + dev_err(&pd_dev->dev, + "%s pci_get_drvdata returned NULL\n", __func__); + return -EFAULT; + } + + if (!data->irq_reg_sts) { + /* register IRQ */ + retval = request_irq(board_dat->pdev->irq, pch_spi_handler, + IRQF_SHARED, KBUILD_MODNAME, data); + if (retval < 0) { + dev_err(&pd_dev->dev, + "%s request_irq failed\n", __func__); + return retval; + } + + /* reset PCH SPI h/w */ + pch_spi_reset(data->master); + pch_spi_set_master_mode(data->master); + data->irq_reg_sts = true; + } + return 0; +} +#else +#define pch_spi_pd_suspend NULL +#define pch_spi_pd_resume NULL +#endif + +static struct platform_driver pch_spi_pd_driver = { + .driver = { + .name = "pch-spi", + .owner = THIS_MODULE, + }, + .probe = pch_spi_pd_probe, + .remove = __devexit_p(pch_spi_pd_remove), + .suspend = pch_spi_pd_suspend, + .resume = pch_spi_pd_resume +}; + +static int __devinit pch_spi_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct pch_spi_board_data *board_dat; + struct platform_device *pd_dev = NULL; + int retval; + int i; + struct pch_pd_dev_save *pd_dev_save; + + pd_dev_save = kzalloc(sizeof(struct pch_pd_dev_save), GFP_KERNEL); + if (!pd_dev_save) { + dev_err(&pdev->dev, "%s Can't allocate pd_dev_sav\n", __func__); + return -ENOMEM; + } + + board_dat = kzalloc(sizeof(struct pch_spi_board_data), GFP_KERNEL); + if (!board_dat) { + dev_err(&pdev->dev, "%s Can't allocate board_dat\n", __func__); + retval = -ENOMEM; + goto err_no_mem; + } + + retval = pci_request_regions(pdev, KBUILD_MODNAME); + if (retval) { + dev_err(&pdev->dev, "%s request_region failed\n", __func__); + goto pci_request_regions; + } + + board_dat->pdev = pdev; + board_dat->num = id->driver_data; + pd_dev_save->num = id->driver_data; + pd_dev_save->board_dat = board_dat; + + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "%s pci_enable_device failed\n", __func__); + goto pci_enable_device; + } + + for (i = 0; i < board_dat->num; i++) { + pd_dev = platform_device_alloc("pch-spi", i); + if (!pd_dev) { + dev_err(&pdev->dev, "platform_device_alloc failed\n"); + goto err_platform_device; + } + pd_dev_save->pd_save[i] = pd_dev; + pd_dev->dev.parent = &pdev->dev; + + retval = platform_device_add_data(pd_dev, board_dat, + sizeof(*board_dat)); + if (retval) { + dev_err(&pdev->dev, + "platform_device_add_data failed\n"); + platform_device_put(pd_dev); + goto err_platform_device; + } + + retval = platform_device_add(pd_dev); + if (retval) { + dev_err(&pdev->dev, "platform_device_add failed\n"); + platform_device_put(pd_dev); + goto err_platform_device; + } + } + + pci_set_drvdata(pdev, pd_dev_save); + + return 0; + +err_platform_device: + pci_disable_device(pdev); +pci_enable_device: + pci_release_regions(pdev); +pci_request_regions: + kfree(board_dat); +err_no_mem: + kfree(pd_dev_save); + + return retval; +} + +static void __devexit pch_spi_remove(struct pci_dev *pdev) +{ + int i; + struct pch_pd_dev_save *pd_dev_save = pci_get_drvdata(pdev); + + dev_dbg(&pdev->dev, "%s ENTRY:pdev=%p\n", __func__, pdev); + + for (i = 0; i < pd_dev_save->num; i++) + platform_device_unregister(pd_dev_save->pd_save[i]); + + pci_disable_device(pdev); + pci_release_regions(pdev); + kfree(pd_dev_save->board_dat); + kfree(pd_dev_save); +} + +#ifdef CONFIG_PM +static int pch_spi_suspend(struct pci_dev *pdev, pm_message_t state) +{ + int retval; + struct pch_pd_dev_save *pd_dev_save = pci_get_drvdata(pdev); + + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + pd_dev_save->board_dat->suspend_sts = true; + /* save config space */ retval = pci_save_state(pdev); - if (retval == 0) { - dev_dbg(&pdev->dev, "%s pci_save_state returned=%d\n", - __func__, retval); - /* disable PM notifications */ pci_enable_wake(pdev, PCI_D3hot, 0); - dev_dbg(&pdev->dev, - "%s pci_enable_wake invoked successfully\n", __func__); - /* disable PCI device */ pci_disable_device(pdev); - dev_dbg(&pdev->dev, - "%s pci_disable_device invoked successfully\n", - __func__); - /* move device to D3hot state */ pci_set_power_state(pdev, PCI_D3hot); - dev_dbg(&pdev->dev, - "%s pci_set_power_state invoked successfully\n", - __func__); } else { dev_err(&pdev->dev, "%s pci_save_state failed\n", __func__); } - dev_dbg(&pdev->dev, "%s return=%d\n", __func__, retval); - return retval; } static int pch_spi_resume(struct pci_dev *pdev) { int retval; - - struct pch_spi_board_data *board = pci_get_drvdata(pdev); + struct pch_pd_dev_save *pd_dev_save = pci_get_drvdata(pdev); dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); - if (!board) { - dev_err(&pdev->dev, - "%s pci_get_drvdata returned NULL\n", __func__); - return -EFAULT; - } - - /* move device to DO power state */ pci_set_power_state(pdev, PCI_D0); - - /* restore state */ pci_restore_state(pdev); retval = pci_enable_device(pdev); @@ -1242,34 +1664,12 @@ static int pch_spi_resume(struct pci_dev *pdev) dev_err(&pdev->dev, "%s pci_enable_device failed\n", __func__); } else { - /* disable PM notifications */ pci_enable_wake(pdev, PCI_D3hot, 0); - /* register IRQ handler */ - if (!board->irq_reg_sts) { - /* register IRQ */ - retval = request_irq(board->pdev->irq, pch_spi_handler, - IRQF_SHARED, KBUILD_MODNAME, - board); - if (retval < 0) { - dev_err(&pdev->dev, - "%s request_irq failed\n", __func__); - return retval; - } - board->irq_reg_sts = true; - - /* reset PCH SPI h/w */ - pch_spi_reset(board->data->master); - pch_spi_set_master_mode(board->data->master); - - /* set suspend status to false */ - board->suspend_sts = false; - - } + /* set suspend status to false */ + pd_dev_save->board_dat->suspend_sts = false; } - dev_dbg(&pdev->dev, "%s returning=%d\n", __func__, retval); - return retval; } #else @@ -1289,15 +1689,29 @@ static struct pci_driver pch_spi_pcidev = { static int __init pch_spi_init(void) { - return pci_register_driver(&pch_spi_pcidev); + int ret; + ret = platform_driver_register(&pch_spi_pd_driver); + if (ret) + return ret; + + ret = pci_register_driver(&pch_spi_pcidev); + if (ret) + return ret; + + return 0; } module_init(pch_spi_init); static void __exit pch_spi_exit(void) { pci_unregister_driver(&pch_spi_pcidev); + platform_driver_unregister(&pch_spi_pd_driver); } module_exit(pch_spi_exit); +module_param(use_dma, int, 0644); +MODULE_PARM_DESC(use_dma, + "to use DMA for data transfers pass 1 else 0; default 1"); + MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Topcliff PCH SPI PCI Driver"); +MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR ML7xxx IOH SPI Driver"); diff --git a/drivers/spi/spi_txx9.c b/drivers/spi/spi-txx9.c index dfa024b..f0a2ab0 100644 --- a/drivers/spi/spi_txx9.c +++ b/drivers/spi/spi-txx9.c @@ -1,5 +1,5 @@ /* - * spi_txx9.c - TXx9 SPI controller driver. + * TXx9 SPI controller driver. * * Based on linux/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c * Copyright (C) 2000-2001 Toshiba Corporation diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/spi-xilinx.c index 4d2c75d..4d2c75d 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/spi-xilinx.c diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 2e13a14..4d1b9f5 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1,5 +1,5 @@ /* - * spi.c - SPI init/core code + * SPI init/core code * * Copyright (C) 2005 David Brownell * diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c deleted file mode 100644 index be99135..0000000 --- a/drivers/spi/spi_s3c24xx_gpio.c +++ /dev/null @@ -1,201 +0,0 @@ -/* linux/drivers/spi/spi_s3c24xx_gpio.c - * - * Copyright (c) 2006 Ben Dooks - * Copyright (c) 2006 Simtec Electronics - * - * S3C24XX GPIO based SPI driver - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/workqueue.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> - -#include <linux/spi/spi.h> -#include <linux/spi/spi_bitbang.h> - -#include <mach/regs-gpio.h> -#include <mach/spi-gpio.h> -#include <mach/hardware.h> - -struct s3c2410_spigpio { - struct spi_bitbang bitbang; - - struct s3c2410_spigpio_info *info; - struct platform_device *dev; -}; - -static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi) -{ - return spi_master_get_devdata(spi->master); -} - -static inline void setsck(struct spi_device *dev, int on) -{ - struct s3c2410_spigpio *sg = spidev_to_sg(dev); - s3c2410_gpio_setpin(sg->info->pin_clk, on ? 1 : 0); -} - -static inline void setmosi(struct spi_device *dev, int on) -{ - struct s3c2410_spigpio *sg = spidev_to_sg(dev); - s3c2410_gpio_setpin(sg->info->pin_mosi, on ? 1 : 0); -} - -static inline u32 getmiso(struct spi_device *dev) -{ - struct s3c2410_spigpio *sg = spidev_to_sg(dev); - return s3c2410_gpio_getpin(sg->info->pin_miso) ? 1 : 0; -} - -#define spidelay(x) ndelay(x) - -#include "spi_bitbang_txrx.h" - - -static u32 s3c2410_spigpio_txrx_mode0(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); -} - -static u32 s3c2410_spigpio_txrx_mode1(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); -} - -static u32 s3c2410_spigpio_txrx_mode2(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); -} - -static u32 s3c2410_spigpio_txrx_mode3(struct spi_device *spi, - unsigned nsecs, u32 word, u8 bits) -{ - return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); -} - - -static void s3c2410_spigpio_chipselect(struct spi_device *dev, int value) -{ - struct s3c2410_spigpio *sg = spidev_to_sg(dev); - - if (sg->info && sg->info->chip_select) - (sg->info->chip_select)(sg->info, value); -} - -static int s3c2410_spigpio_probe(struct platform_device *dev) -{ - struct s3c2410_spigpio_info *info; - struct spi_master *master; - struct s3c2410_spigpio *sp; - int ret; - - master = spi_alloc_master(&dev->dev, sizeof(struct s3c2410_spigpio)); - if (master == NULL) { - dev_err(&dev->dev, "failed to allocate spi master\n"); - ret = -ENOMEM; - goto err; - } - - sp = spi_master_get_devdata(master); - - platform_set_drvdata(dev, sp); - - /* copy in the plkatform data */ - info = sp->info = dev->dev.platform_data; - - /* setup spi bitbang adaptor */ - sp->bitbang.master = spi_master_get(master); - sp->bitbang.master->bus_num = info->bus_num; - sp->bitbang.master->num_chipselect = info->num_chipselect; - sp->bitbang.chipselect = s3c2410_spigpio_chipselect; - - sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0; - sp->bitbang.txrx_word[SPI_MODE_1] = s3c2410_spigpio_txrx_mode1; - sp->bitbang.txrx_word[SPI_MODE_2] = s3c2410_spigpio_txrx_mode2; - sp->bitbang.txrx_word[SPI_MODE_3] = s3c2410_spigpio_txrx_mode3; - - /* set state of spi pins, always assume that the clock is - * available, but do check the MOSI and MISO. */ - s3c2410_gpio_setpin(info->pin_clk, 0); - s3c2410_gpio_cfgpin(info->pin_clk, S3C2410_GPIO_OUTPUT); - - if (info->pin_mosi < S3C2410_GPH10) { - s3c2410_gpio_setpin(info->pin_mosi, 0); - s3c2410_gpio_cfgpin(info->pin_mosi, S3C2410_GPIO_OUTPUT); - } - - if (info->pin_miso != S3C2410_GPA0 && info->pin_miso < S3C2410_GPH10) - s3c2410_gpio_cfgpin(info->pin_miso, S3C2410_GPIO_INPUT); - - ret = spi_bitbang_start(&sp->bitbang); - if (ret) - goto err_no_bitbang; - - return 0; - - err_no_bitbang: - spi_master_put(sp->bitbang.master); - err: - return ret; - -} - -static int s3c2410_spigpio_remove(struct platform_device *dev) -{ - struct s3c2410_spigpio *sp = platform_get_drvdata(dev); - - spi_bitbang_stop(&sp->bitbang); - spi_master_put(sp->bitbang.master); - - return 0; -} - -/* all gpio should be held over suspend/resume, so we should - * not need to deal with this -*/ - -#define s3c2410_spigpio_suspend NULL -#define s3c2410_spigpio_resume NULL - -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:spi_s3c24xx_gpio"); - -static struct platform_driver s3c2410_spigpio_drv = { - .probe = s3c2410_spigpio_probe, - .remove = s3c2410_spigpio_remove, - .suspend = s3c2410_spigpio_suspend, - .resume = s3c2410_spigpio_resume, - .driver = { - .name = "spi_s3c24xx_gpio", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c2410_spigpio_init(void) -{ - return platform_driver_register(&s3c2410_spigpio_drv); -} - -static void __exit s3c2410_spigpio_exit(void) -{ - platform_driver_unregister(&s3c2410_spigpio_drv); -} - -module_init(s3c2410_spigpio_init); -module_exit(s3c2410_spigpio_exit); - -MODULE_DESCRIPTION("S3C24XX SPI Driver"); -MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index d9fd862..830adbe 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -1,5 +1,5 @@ /* - * spidev.c -- simple synchronous userspace interface to SPI devices + * Simple synchronous userspace interface to SPI devices * * Copyright (C) 2006 SWAPP * Andrea Paterniani <a.paterniani@swapp-eng.it> diff --git a/sound/soc/ep93xx/ep93xx-ac97.c b/sound/soc/ep93xx/ep93xx-ac97.c index 104e95c..c7417c7 100644 --- a/sound/soc/ep93xx/ep93xx-ac97.c +++ b/sound/soc/ep93xx/ep93xx-ac97.c @@ -106,12 +106,12 @@ static struct ep93xx_ac97_info *ep93xx_ac97_info; static struct ep93xx_pcm_dma_params ep93xx_ac97_pcm_out = { .name = "ac97-pcm-out", - .dma_port = EP93XX_DMA_M2P_PORT_AAC1, + .dma_port = EP93XX_DMA_AAC1, }; static struct ep93xx_pcm_dma_params ep93xx_ac97_pcm_in = { .name = "ac97-pcm-in", - .dma_port = EP93XX_DMA_M2P_PORT_AAC1, + .dma_port = EP93XX_DMA_AAC1, }; static inline unsigned ep93xx_ac97_read_reg(struct ep93xx_ac97_info *info, diff --git a/sound/soc/ep93xx/ep93xx-i2s.c b/sound/soc/ep93xx/ep93xx-i2s.c index 042f4e9..30df425 100644 --- a/sound/soc/ep93xx/ep93xx-i2s.c +++ b/sound/soc/ep93xx/ep93xx-i2s.c @@ -70,11 +70,11 @@ struct ep93xx_i2s_info { struct ep93xx_pcm_dma_params ep93xx_i2s_dma_params[] = { [SNDRV_PCM_STREAM_PLAYBACK] = { .name = "i2s-pcm-out", - .dma_port = EP93XX_DMA_M2P_PORT_I2S1, + .dma_port = EP93XX_DMA_I2S1, }, [SNDRV_PCM_STREAM_CAPTURE] = { .name = "i2s-pcm-in", - .dma_port = EP93XX_DMA_M2P_PORT_I2S1, + .dma_port = EP93XX_DMA_I2S1, }, }; diff --git a/sound/soc/ep93xx/ep93xx-pcm.c b/sound/soc/ep93xx/ep93xx-pcm.c index a456e49..a07f99c 100644 --- a/sound/soc/ep93xx/ep93xx-pcm.c +++ b/sound/soc/ep93xx/ep93xx-pcm.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/slab.h> +#include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <sound/core.h> @@ -53,43 +54,34 @@ static const struct snd_pcm_hardware ep93xx_pcm_hardware = { struct ep93xx_runtime_data { - struct ep93xx_dma_m2p_client cl; - struct ep93xx_pcm_dma_params *params; int pointer_bytes; - struct tasklet_struct period_tasklet; int periods; - struct ep93xx_dma_buffer buf[32]; + int period_bytes; + struct dma_chan *dma_chan; + struct ep93xx_dma_data dma_data; }; -static void ep93xx_pcm_period_elapsed(unsigned long data) +static void ep93xx_pcm_dma_callback(void *data) { - struct snd_pcm_substream *substream = (struct snd_pcm_substream *)data; - snd_pcm_period_elapsed(substream); -} + struct snd_pcm_substream *substream = data; + struct ep93xx_runtime_data *rtd = substream->runtime->private_data; -static void ep93xx_pcm_buffer_started(void *cookie, - struct ep93xx_dma_buffer *buf) -{ + rtd->pointer_bytes += rtd->period_bytes; + rtd->pointer_bytes %= rtd->period_bytes * rtd->periods; + + snd_pcm_period_elapsed(substream); } -static void ep93xx_pcm_buffer_finished(void *cookie, - struct ep93xx_dma_buffer *buf, - int bytes, int error) +static bool ep93xx_pcm_dma_filter(struct dma_chan *chan, void *filter_param) { - struct snd_pcm_substream *substream = cookie; - struct ep93xx_runtime_data *rtd = substream->runtime->private_data; - - if (buf == rtd->buf + rtd->periods - 1) - rtd->pointer_bytes = 0; - else - rtd->pointer_bytes += buf->size; + struct ep93xx_dma_data *data = filter_param; - if (!error) { - ep93xx_dma_m2p_submit_recursive(&rtd->cl, buf); - tasklet_schedule(&rtd->period_tasklet); - } else { - snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN); + if (data->direction == ep93xx_dma_chan_direction(chan)) { + chan->private = data; + return true; } + + return false; } static int ep93xx_pcm_open(struct snd_pcm_substream *substream) @@ -98,30 +90,38 @@ static int ep93xx_pcm_open(struct snd_pcm_substream *substream) struct snd_soc_dai *cpu_dai = soc_rtd->cpu_dai; struct ep93xx_pcm_dma_params *dma_params; struct ep93xx_runtime_data *rtd; + dma_cap_mask_t mask; int ret; - dma_params = snd_soc_dai_get_dma_data(cpu_dai, substream); + ret = snd_pcm_hw_constraint_integer(substream->runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (ret < 0) + return ret; + snd_soc_set_runtime_hwparams(substream, &ep93xx_pcm_hardware); rtd = kmalloc(sizeof(*rtd), GFP_KERNEL); if (!rtd) return -ENOMEM; - memset(&rtd->period_tasklet, 0, sizeof(rtd->period_tasklet)); - rtd->period_tasklet.func = ep93xx_pcm_period_elapsed; - rtd->period_tasklet.data = (unsigned long)substream; - - rtd->cl.name = dma_params->name; - rtd->cl.flags = dma_params->dma_port | EP93XX_DMA_M2P_IGNORE_ERROR | - ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? - EP93XX_DMA_M2P_TX : EP93XX_DMA_M2P_RX); - rtd->cl.cookie = substream; - rtd->cl.buffer_started = ep93xx_pcm_buffer_started; - rtd->cl.buffer_finished = ep93xx_pcm_buffer_finished; - ret = ep93xx_dma_m2p_client_register(&rtd->cl); - if (ret < 0) { + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + dma_cap_set(DMA_CYCLIC, mask); + + dma_params = snd_soc_dai_get_dma_data(cpu_dai, substream); + rtd->dma_data.port = dma_params->dma_port; + rtd->dma_data.name = dma_params->name; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + rtd->dma_data.direction = DMA_TO_DEVICE; + else + rtd->dma_data.direction = DMA_FROM_DEVICE; + + rtd->dma_chan = dma_request_channel(mask, ep93xx_pcm_dma_filter, + &rtd->dma_data); + if (!rtd->dma_chan) { kfree(rtd); - return ret; + return -EINVAL; } substream->runtime->private_data = rtd; @@ -132,31 +132,52 @@ static int ep93xx_pcm_close(struct snd_pcm_substream *substream) { struct ep93xx_runtime_data *rtd = substream->runtime->private_data; - ep93xx_dma_m2p_client_unregister(&rtd->cl); + dma_release_channel(rtd->dma_chan); kfree(rtd); return 0; } +static int ep93xx_pcm_dma_submit(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct ep93xx_runtime_data *rtd = runtime->private_data; + struct dma_chan *chan = rtd->dma_chan; + struct dma_device *dma_dev = chan->device; + struct dma_async_tx_descriptor *desc; + + rtd->pointer_bytes = 0; + desc = dma_dev->device_prep_dma_cyclic(chan, runtime->dma_addr, + rtd->period_bytes * rtd->periods, + rtd->period_bytes, + rtd->dma_data.direction); + if (!desc) + return -EINVAL; + + desc->callback = ep93xx_pcm_dma_callback; + desc->callback_param = substream; + + dmaengine_submit(desc); + return 0; +} + +static void ep93xx_pcm_dma_flush(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct ep93xx_runtime_data *rtd = runtime->private_data; + + dmaengine_terminate_all(rtd->dma_chan); +} + static int ep93xx_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_pcm_runtime *runtime = substream->runtime; struct ep93xx_runtime_data *rtd = runtime->private_data; - size_t totsize = params_buffer_bytes(params); - size_t period = params_period_bytes(params); - int i; snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); - runtime->dma_bytes = totsize; - - rtd->periods = (totsize + period - 1) / period; - for (i = 0; i < rtd->periods; i++) { - rtd->buf[i].bus_addr = runtime->dma_addr + (i * period); - rtd->buf[i].size = period; - if ((i + 1) * period > totsize) - rtd->buf[i].size = totsize - (i * period); - } + rtd->periods = params_periods(params); + rtd->period_bytes = params_period_bytes(params); return 0; } @@ -168,24 +189,20 @@ static int ep93xx_pcm_hw_free(struct snd_pcm_substream *substream) static int ep93xx_pcm_trigger(struct snd_pcm_substream *substream, int cmd) { - struct ep93xx_runtime_data *rtd = substream->runtime->private_data; int ret; - int i; ret = 0; switch (cmd) { case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - rtd->pointer_bytes = 0; - for (i = 0; i < rtd->periods; i++) - ep93xx_dma_m2p_submit(&rtd->cl, rtd->buf + i); + ret = ep93xx_pcm_dma_submit(substream); break; case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - ep93xx_dma_m2p_flush(&rtd->cl); + ep93xx_pcm_dma_flush(substream); break; default: |
