summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/ide/ide-cd.c401
1 files changed, 191 insertions, 210 deletions
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 9071449..cc9e7f4 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -39,7 +39,8 @@
#include <linux/mutex.h>
#include <linux/bcd.h>
-#include <scsi/scsi.h> /* For SCSI -> ATAPI command conversion */
+/* For SCSI -> ATAPI command conversion */
+#include <scsi/scsi.h>
#include <linux/irq.h>
#include <linux/io.h>
@@ -77,12 +78,11 @@ static void ide_cd_put(struct cdrom_info *cd)
mutex_unlock(&idecd_ref_mutex);
}
-/****************************************************************************
+/*
* Generic packet command support and error handling routines.
*/
-/* Mark that we've seen a media change, and invalidate our internal
- buffers. */
+/* Mark that we've seen a media change and invalidate our internal buffers. */
static void cdrom_saw_media_change(ide_drive_t *drive)
{
struct cdrom_info *cd = drive->driver_data;
@@ -105,9 +105,8 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,
break;
case NOT_READY:
/*
- * don't care about tray state messages for
- * e.g. capacity commands or in-progress or
- * becoming ready
+ * don't care about tray state messages for e.g. capacity
+ * commands or in-progress or becoming ready
*/
if (sense->asc == 0x3a || sense->asc == 0x04)
break;
@@ -115,8 +114,8 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,
break;
case ILLEGAL_REQUEST:
/*
- * don't log START_STOP unit with LoEj set, since
- * we cannot reliably check if drive can auto-close
+ * don't log START_STOP unit with LoEj set, since we cannot
+ * reliably check if drive can auto-close
*/
if (rq->cmd[0] == GPCMD_START_STOP_UNIT && sense->asc == 0x24)
break;
@@ -124,9 +123,9 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,
break;
case UNIT_ATTENTION:
/*
- * Make good and sure we've seen this potential media
- * change. Some drives (i.e. Creative) fail to present
- * the correct sense key in the error register.
+ * Make good and sure we've seen this potential media change.
+ * Some drives (i.e. Creative) fail to present the correct sense
+ * key in the error register.
*/
cdrom_saw_media_change(drive);
break;
@@ -151,15 +150,16 @@ void cdrom_analyze_sense_data(ide_drive_t *drive,
return;
/*
- * If a read toc is executed for a CD-R or CD-RW medium where
- * the first toc has not been recorded yet, it will fail with
- * 05/24/00 (which is a confusing error)
+ * If a read toc is executed for a CD-R or CD-RW medium where the first
+ * toc has not been recorded yet, it will fail with 05/24/00 (which is a
+ * confusing error)
*/
if (failed_command && failed_command->cmd[0] == GPCMD_READ_TOC_PMA_ATIP)
if (sense->sense_key == 0x05 && sense->asc == 0x24)
return;
- if (sense->error_code == 0x70) { /* Current Error */
+ /* current error */
+ if (sense->error_code == 0x70) {
switch (sense->sense_key) {
case MEDIUM_ERROR:
case VOLUME_OVERFLOW:
@@ -178,7 +178,8 @@ void cdrom_analyze_sense_data(ide_drive_t *drive,
if (bio_sectors < 4)
bio_sectors = 4;
if (drive->queue->hardsect_size == 2048)
- sector <<= 2; /* Device sector size is 2K */
+ /* device sector size is 2K */
+ sector <<= 2;
sector &= ~(bio_sectors - 1);
valid = (sector - failed_command->sector) << 9;
@@ -194,9 +195,7 @@ void cdrom_analyze_sense_data(ide_drive_t *drive,
ide_cd_log_error(drive->name, failed_command, sense);
}
-/*
- * Initialize a ide-cd packet command request
- */
+/* Initialize a ide-cd packet command request */
void ide_cd_init_rq(ide_drive_t *drive, struct request *rq)
{
struct cdrom_info *cd = drive->driver_data;
@@ -252,7 +251,7 @@ static void cdrom_end_request(ide_drive_t *drive, int uptodate)
}
cdrom_analyze_sense_data(drive, failed, sense);
/*
- * now end failed request
+ * now end the failed request
*/
if (blk_fs_request(failed)) {
if (ide_end_dequeued_request(drive, failed, 0,
@@ -287,14 +286,17 @@ static void ide_dump_status_no_sense(ide_drive_t *drive, const char *msg, u8 sta
ide_dump_status(drive, msg, stat);
}
-/* Returns 0 if the request should be continued.
- Returns 1 if the request was ended. */
+/*
+ * Returns:
+ * 0: if the request should be continued.
+ * 1: if the request was ended.
+ */
static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
{
struct request *rq = HWGROUP(drive)->rq;
int stat, err, sense_key;
- /* Check for errors. */
+ /* check for errors */
stat = ide_read_status(drive);
if (stat_ret)
@@ -303,7 +305,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
if (OK_STAT(stat, good_stat, BAD_R_STAT))
return 0;
- /* Get the IDE error register. */
+ /* get the IDE error register */
err = ide_read_error(drive);
sense_key = err >> 4;
@@ -313,10 +315,11 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
}
if (blk_sense_request(rq)) {
- /* We got an error trying to get sense info
- from the drive (probably while trying
- to recover from a former error). Just give up. */
-
+ /*
+ * We got an error trying to get sense info from the drive
+ * (probably while trying to recover from a former error).
+ * Just give up.
+ */
rq->cmd_flags |= REQ_FAILED;
cdrom_end_request(drive, 0);
ide_error(drive, "request sense failure", stat);
@@ -332,13 +335,12 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
if (blk_pc_request(rq) && !rq->errors)
rq->errors = SAM_STAT_CHECK_CONDITION;
- /* Check for tray open. */
+ /* check for tray open */
if (sense_key == NOT_READY) {
cdrom_saw_media_change(drive);
} else if (sense_key == UNIT_ATTENTION) {
- /* Check for media change. */
+ /* check for media change */
cdrom_saw_media_change(drive);
- /*printk("%s: media changed\n",drive->name);*/
return 0;
} else if (sense_key == ILLEGAL_REQUEST &&
rq->cmd[0] == GPCMD_START_STOP_UNIT) {
@@ -350,7 +352,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
* cdrom_log_sense() knows this!
*/
} else if (!(rq->cmd_flags & REQ_QUIET)) {
- /* Otherwise, print an error. */
+ /* otherwise, print an error */
ide_dump_status(drive, "packet command error", stat);
}
@@ -366,25 +368,27 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
} else if (blk_fs_request(rq)) {
int do_end_request = 0;
- /* Handle errors from READ and WRITE requests. */
+ /* handle errors from READ and WRITE requests */
if (blk_noretry_request(rq))
do_end_request = 1;
if (sense_key == NOT_READY) {
- /* Tray open. */
+ /* tray open */
if (rq_data_dir(rq) == READ) {
cdrom_saw_media_change(drive);
- /* Fail the request. */
+ /* fail the request */
printk("%s: tray open\n", drive->name);
do_end_request = 1;
} else {
struct cdrom_info *info = drive->driver_data;
- /* allow the drive 5 seconds to recover, some
+ /*
+ * Allow the drive 5 seconds to recover, some
* devices will return this error while flushing
- * data from cache */
+ * data from cache.
+ */
if (!rq->errors)
info->write_timeout = jiffies + ATAPI_WAIT_WRITE_BUSY;
rq->errors = 1;
@@ -394,8 +398,8 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
unsigned long flags;
/*
- * take a breather relying on the
- * unplug timer to kick us again
+ * take a breather relying on the unplug
+ * timer to kick us again
*/
spin_lock_irqsave(&ide_lock, flags);
blk_plug_device(drive->queue);
@@ -404,55 +408,54 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
}
}
} else if (sense_key == UNIT_ATTENTION) {
- /* Media change. */
+ /* media change */
cdrom_saw_media_change (drive);
/*
- * Arrange to retry the request.
- * But be sure to give up if we've retried
- * too many times.
+ * Arrange to retry the request but be sure to give up
+ * if we've retried too many times.
*/
if (++rq->errors > ERROR_MAX)
do_end_request = 1;
} else if (sense_key == ILLEGAL_REQUEST ||
sense_key == DATA_PROTECT) {
/*
- * No point in retrying after an illegal
- * request or data protect error.
+ * No point in retrying after an illegal request or data
+ * protect error.
*/
ide_dump_status_no_sense(drive, "command error", stat);
do_end_request = 1;
} else if (sense_key == MEDIUM_ERROR) {
/*
* No point in re-trying a zillion times on a bad
- * sector... If we got here the error is not correctable
+ * sector. If we got here the error is not correctable.
*/
ide_dump_status_no_sense(drive, "media error (bad sector)", stat);
do_end_request = 1;
} else if (sense_key == BLANK_CHECK) {
- /* Disk appears blank ?? */
+ /* disk appears blank ?? */
ide_dump_status_no_sense(drive, "media error (blank)", stat);
do_end_request = 1;
} else if ((err & ~ABRT_ERR) != 0) {
- /* Go to the default handler
- for other errors. */
+ /* go to the default handler for other errors */
ide_error(drive, "cdrom_decode_status", stat);
return 1;
} else if ((++rq->errors > ERROR_MAX)) {
- /* We've racked up too many retries. Abort. */
+ /* we've racked up too many retries, abort */
do_end_request = 1;
}
- /* End a request through request sense analysis when we have
- sense data. We need this in order to perform end of media
- processing */
-
+ /*
+ * End a request through request sense analysis when we have
+ * sense data. We need this in order to perform end of media
+ * processing.
+ */
if (do_end_request)
goto end_request;
/*
- * If we got a CHECK_CONDITION status,
- * queue a request sense command.
+ * If we got a CHECK_CONDITION status, queue
+ * a request sense command.
*/
if (stat & ERR_STAT)
cdrom_queue_request_sense(drive, NULL, NULL);
@@ -461,7 +464,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
cdrom_end_request(drive, 0);
}
- /* Retry, or handle the next request. */
+ /* retry, or handle the next request */
return 1;
end_request:
@@ -486,10 +489,10 @@ static int cdrom_timer_expiry(ide_drive_t *drive)
unsigned long wait = 0;
/*
- * Some commands are *slow* and normally take a long time to
- * complete. Usually we can use the ATAPI "disconnect" to bypass
- * this, but not all commands/drives support that. Let
- * ide_timer_expiry keep polling us for these.
+ * Some commands are *slow* and normally take a long time to complete.
+ * Usually we can use the ATAPI "disconnect" to bypass this, but not all
+ * commands/drives support that. Let ide_timer_expiry keep polling us
+ * for these.
*/
switch (rq->cmd[0]) {
case GPCMD_BLANK:
@@ -508,13 +511,14 @@ static int cdrom_timer_expiry(ide_drive_t *drive)
return wait;
}
-/* Set up the device registers for transferring a packet command on DEV,
- expecting to later transfer XFERLEN bytes. HANDLER is the routine
- which actually transfers the command to the drive. If this is a
- drq_interrupt device, this routine will arrange for HANDLER to be
- called when the interrupt from the drive arrives. Otherwise, HANDLER
- will be called immediately after the drive is prepared for the transfer. */
-
+/*
+ * Set up the device registers for transferring a packet command on DEV,
+ * expecting to later transfer XFERLEN bytes. HANDLER is the routine
+ * which actually transfers the command to the drive. If this is a
+ * drq_interrupt device, this routine will arrange for HANDLER to be
+ * called when the interrupt from the drive arrives. Otherwise, HANDLER
+ * will be called immediately after the drive is prepared for the transfer.
+ */
static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
int xferlen,
ide_handler_t *handler)
@@ -523,7 +527,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
struct cdrom_info *info = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
- /* Wait for the controller to be idle. */
+ /* wait for the controller to be idle */
if (ide_wait_stat(&startstop, drive, 0, BUSY_STAT, WAIT_READY))
return startstop;
@@ -531,7 +535,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
if (info->dma)
info->dma = !hwif->dma_setup(drive);
- /* Set up the controller registers. */
+ /* set up the controller registers */
ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL |
IDE_TFLAG_NO_SELECT_MASK, xferlen, info->dma);
@@ -557,11 +561,12 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
}
}
-/* Send a packet command to DRIVE described by CMD_BUF and CMD_LEN.
- The device registers must have already been prepared
- by cdrom_start_packet_command.
- HANDLER is the interrupt handler to call when the command completes
- or there's data ready. */
+/*
+ * Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. The device
+ * registers must have already been prepared by cdrom_start_packet_command.
+ * HANDLER is the interrupt handler to call when the command completes or
+ * there's data ready.
+ */
#define ATAPI_MIN_CDB_BYTES 12
static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
struct request *rq,
@@ -573,24 +578,26 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
ide_startstop_t startstop;
if (info->cd_flags & IDE_CD_FLAG_DRQ_INTERRUPT) {
- /* Here we should have been called after receiving an interrupt
- from the device. DRQ should how be set. */
+ /*
+ * Here we should have been called after receiving an interrupt
+ * from the device. DRQ should how be set.
+ */
- /* Check for errors. */
+ /* check for errors */
if (cdrom_decode_status(drive, DRQ_STAT, NULL))
return ide_stopped;
- /* Ok, next interrupt will be DMA interrupt. */
+ /* ok, next interrupt will be DMA interrupt */
if (info->dma)
drive->waiting_for_dma = 1;
} else {
- /* Otherwise, we must wait for DRQ to get set. */
+ /* otherwise, we must wait for DRQ to get set */
if (ide_wait_stat(&startstop, drive, DRQ_STAT,
BUSY_STAT, WAIT_READY))
return startstop;
}
- /* Arm the interrupt handler. */
+ /* arm the interrupt handler */
ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry);
/* ATAPI commands get padded out to 12 bytes minimum */
@@ -598,20 +605,19 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
if (cmd_len < ATAPI_MIN_CDB_BYTES)
cmd_len = ATAPI_MIN_CDB_BYTES;
- /* Send the command to the device. */
+ /* send the command to the device */
HWIF(drive)->atapi_output_bytes(drive, rq->cmd, cmd_len);
- /* Start the DMA if need be */
+ /* start the DMA if need be */
if (info->dma)
hwif->dma_start(drive);
return ide_started;
}
-/****************************************************************************
+/*
* Block read functions.
*/
-
static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len)
{
while (len > 0) {
@@ -649,20 +655,21 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
ide_hwif_t *hwif = drive->hwif;
xfer_func_t *xf;
- /* Whoops... */
+ /* whoops... */
printk(KERN_ERR "%s: %s: wrong transfer direction!\n",
drive->name, __func__);
xf = rw ? hwif->atapi_output_bytes : hwif->atapi_input_bytes;
ide_cd_pad_transfer(drive, xf, len);
} else if (rw == 0 && ireason == 1) {
- /* Some drives (ASUS) seem to tell us that status
- * info is available. just get it and ignore.
+ /*
+ * Some drives (ASUS) seem to tell us that status info is
+ * available. Just get it and ignore.
*/
(void)ide_read_status(drive);
return 0;
} else {
- /* Drive wants a command packet, or invalid ireason... */
+ /* drive wants a command packet, or invalid ireason... */
printk(KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n",
drive->name, __func__, ireason);
}
@@ -702,10 +709,10 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)
static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
/*
- * Routine to send a read/write packet command to the drive.
- * This is usually called directly from cdrom_start_{read,write}().
- * However, for drq_interrupt devices, it is called from an interrupt
- * when the drive is ready to accept the command.
+ * Routine to send a read/write packet command to the drive. This is usually
+ * called directly from cdrom_start_{read,write}(). However, for drq_interrupt
+ * devices, it is called from an interrupt when the drive is ready to accept
+ * the command.
*/
static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
{
@@ -727,7 +734,7 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
* is larger than the buffer size.
*/
if (nskip > 0) {
- /* Sanity check... */
+ /* sanity check... */
if (rq->current_nr_sectors !=
bio_cur_sectors(rq->bio)) {
printk(KERN_ERR "%s: %s: buffer botch (%u)\n",
@@ -744,10 +751,10 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
/* the immediate bit */
rq->cmd[1] = 1 << 3;
#endif
- /* Set up the command */
+ /* set up the command */
rq->timeout = ATAPI_WAIT_PC;
- /* Send the command to the drive and return. */
+ /* send the command to the drive and return */
return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
}
@@ -767,14 +774,8 @@ static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive)
info->cd_flags |= IDE_CD_FLAG_SEEKING;
if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) {
- if (--retry == 0) {
- /*
- * this condition is far too common, to bother
- * users about it
- */
- /* printk("%s: disabled DSC seek overlap\n", drive->name);*/
+ if (--retry == 0)
drive->dsc_overlap = 0;
- }
}
return ide_stopped;
}
@@ -804,8 +805,8 @@ static ide_startstop_t cdrom_start_seek(ide_drive_t *drive, unsigned int block)
}
/*
- * Fix up a possibly partially-processed request so that we can
- * start it over entirely, or even put it back on the request queue.
+ * Fix up a possibly partially-processed request so that we can start it over
+ * entirely, or even put it back on the request queue.
*/
static void restore_request(struct request *rq)
{
@@ -822,10 +823,9 @@ static void restore_request(struct request *rq)
rq->q->prep_rq_fn(rq->q, rq);
}
-/****************************************************************************
- * Execute all other packet commands.
+/*
+ * All other packet commands.
*/
-
static void ide_cd_request_sense_fixup(struct request *rq)
{
/*
@@ -849,7 +849,7 @@ int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq)
if (rq->sense == NULL)
rq->sense = &sense;
- /* Start of retry loop. */
+ /* start of retry loop */
do {
int error;
unsigned long time = jiffies;
@@ -858,41 +858,45 @@ int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq)
error = ide_do_drive_cmd(drive, rq, ide_wait);
time = jiffies - time;
- /* FIXME: we should probably abort/retry or something
- * in case of failure */
+ /*
+ * FIXME: we should probably abort/retry or something in case of
+ * failure.
+ */
if (rq->cmd_flags & REQ_FAILED) {
- /* The request failed. Retry if it was due to a unit
- attention status
- (usually means media was changed). */
+ /*
+ * The request failed. Retry if it was due to a unit
+ * attention status (usually means media was changed).
+ */
struct request_sense *reqbuf = rq->sense;
if (reqbuf->sense_key == UNIT_ATTENTION)
cdrom_saw_media_change(drive);
else if (reqbuf->sense_key == NOT_READY &&
reqbuf->asc == 4 && reqbuf->ascq != 4) {
- /* The drive is in the process of loading
- a disk. Retry, but wait a little to give
- the drive time to complete the load. */
+ /*
+ * The drive is in the process of loading
+ * a disk. Retry, but wait a little to give
+ * the drive time to complete the load.
+ */
ssleep(2);
} else {
- /* Otherwise, don't retry. */
+ /* otherwise, don't retry */
retries = 0;
}
--retries;
}
- /* End of retry loop. */
+ /* end of retry loop */
} while ((rq->cmd_flags & REQ_FAILED) && retries >= 0);
- /* Return an error if the command failed. */
+ /* return an error if the command failed */
return (rq->cmd_flags & REQ_FAILED) ? -EIO : 0;
}
/*
- * Called from blk_end_request_callback() after the data of the request
- * is completed and before the request is completed.
- * By returning value '1', blk_end_request_callback() returns immediately
- * without completing the request.
+ * Called from blk_end_request_callback() after the data of the request is
+ * completed and before the request itself is completed. By returning value '1',
+ * blk_end_request_callback() returns immediately without completing it.
*/
static int cdrom_newpc_intr_dummy_cb(struct request *rq)
{
@@ -911,7 +915,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
unsigned int timeout;
u8 lowcyl, highcyl;
- /* Check for errors. */
+ /* check for errors */
dma = info->dma;
if (dma) {
info->dma = 0;
@@ -926,9 +930,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
if (cdrom_decode_status(drive, 0, &stat))
return ide_stopped;
- /*
- * using dma, transfer is complete now
- */
+ /* using dma, transfer is complete now */
if (dma) {
if (dma_error)
return ide_error(drive, "dma error", stat);
@@ -939,9 +941,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
goto end_request;
}
- /*
- * ok we fall to pio :/
- */
+ /* ok we fall to pio :/ */
ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]) & 0x3;
lowcyl = hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]);
highcyl = hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]);
@@ -952,9 +952,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
if (thislen > len)
thislen = len;
- /*
- * If DRQ is clear, the command has completed.
- */
+ /* If DRQ is clear, the command has completed. */
if ((stat & DRQ_STAT) == 0) {
if (blk_fs_request(rq)) {
/*
@@ -975,15 +973,13 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
return ide_stopped;
} else if (!blk_pc_request(rq)) {
ide_cd_request_sense_fixup(rq);
- /* Complain if we still have data left to transfer. */
+ /* complain if we still have data left to transfer */
uptodate = rq->data_len ? 0 : 1;
}
goto end_request;
}
- /*
- * check which way to transfer data
- */
+ /* check which way to transfer data */
if (ide_cd_check_ireason(drive, rq, len, ireason, write))
return ide_stopped;
@@ -1019,16 +1015,12 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
xferfunc = HWIF(drive)->atapi_input_bytes;
}
- /*
- * transfer data
- */
+ /* transfer data */
while (thislen > 0) {
u8 *ptr = blk_fs_request(rq) ? NULL : rq->data;
int blen = rq->data_len;
- /*
- * bio backed?
- */
+ /* bio backed? */
if (rq->bio) {
if (blk_fs_request(rq)) {
ptr = rq->buffer;
@@ -1043,7 +1035,8 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
if (blk_fs_request(rq) && !write)
/*
* If the buffers are full, pipe the rest into
- * oblivion. */
+ * oblivion.
+ */
ide_cd_drain_data(drive, thislen >> 9);
else {
printk(KERN_ERR "%s: confused, missing data\n",
@@ -1090,9 +1083,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
rq->sense_len += blen;
}
- /*
- * pad, if necessary
- */
+ /* pad, if necessary */
if (!blk_fs_request(rq) && len > 0)
ide_cd_pad_transfer(drive, xferfunc, len);
@@ -1136,9 +1127,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
queue_hardsect_size(drive->queue) >> SECTOR_BITS;
if (write) {
- /*
- * disk has become write protected
- */
+ /* disk has become write protected */
if (cd->disk->policy) {
cdrom_end_request(drive, 0);
return ide_stopped;
@@ -1151,9 +1140,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
restore_request(rq);
}
- /*
- * use DMA, if possible / writes *must* be hardware frame aligned
- */
+ /* use DMA, if possible / writes *must* be hardware frame aligned */
if ((rq->nr_sectors & (sectors_per_frame - 1)) ||
(rq->sector & (sectors_per_frame - 1))) {
if (write) {
@@ -1167,7 +1154,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
if (write)
cd->devinfo.media_written = 1;
- /* Start sending the read/write request to the drive. */
+ /* start sending the read/write request to the drive */
return cdrom_start_packet_command(drive, 32768, cdrom_start_rw_cont);
}
@@ -1192,9 +1179,7 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
info->dma = 0;
- /*
- * sg request
- */
+ /* sg request */
if (rq->bio) {
int mask = drive->queue->dma_alignment;
unsigned long addr = (unsigned long) page_address(bio_page(rq->bio));
@@ -1211,11 +1196,11 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
info->dma = 0;
}
- /* Start sending the command to the drive. */
+ /* start sending the command to the drive */
return cdrom_start_packet_command(drive, rq->data_len, cdrom_do_newpc_cont);
}
-/****************************************************************************
+/*
* cdrom driver request routine.
*/
static ide_startstop_t
@@ -1248,9 +1233,7 @@ ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, sector_t block)
rq->cmd_type == REQ_TYPE_ATA_PC) {
return cdrom_do_block_pc(drive, rq);
} else if (blk_special_request(rq)) {
- /*
- * right now this can only be a reset...
- */
+ /* right now this can only be a reset... */
cdrom_end_request(drive, 1);
return ide_stopped;
}
@@ -1262,16 +1245,15 @@ ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, sector_t block)
-/****************************************************************************
+/*
* Ioctl handling.
*
- * Routines which queue packet commands take as a final argument a pointer
- * to a request_sense struct. If execution of the command results
- * in an error with a CHECK CONDITION status, this structure will be filled
- * with the results of the subsequent request sense command. The pointer
- * can also be NULL, in which case no sense information is returned.
+ * Routines which queue packet commands take as a final argument a pointer to a
+ * request_sense struct. If execution of the command results in an error with a
+ * CHECK CONDITION status, this structure will be filled with the results of the
+ * subsequent request sense command. The pointer can also be NULL, in which case
+ * no sense information is returned.
*/
-
static
void msf_from_bcd(struct atapi_msf *msf)
{
@@ -1293,8 +1275,8 @@ int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
req.cmd_flags |= REQ_QUIET;
/*
- * Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to
- * switch CDs instead of supporting the LOAD_UNLOAD opcode.
+ * Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to switch CDs
+ * instead of supporting the LOAD_UNLOAD opcode.
*/
req.cmd[7] = cdi->sanyo_slot % 3;
@@ -1370,7 +1352,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
unsigned long sectors_per_frame = SECTORS_PER_FRAME;
if (toc == NULL) {
- /* Try to allocate space. */
+ /* try to allocate space */
toc = kmalloc(sizeof(struct atapi_toc), GFP_KERNEL);
if (toc == NULL) {
printk(KERN_ERR "%s: No cdrom TOC buffer!\n", drive->name);
@@ -1379,27 +1361,29 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
info->toc = toc;
}
- /* Check to see if the existing data is still valid.
- If it is, just return. */
+ /*
+ * Check to see if the existing data is still valid. If it is,
+ * just return.
+ */
(void) cdrom_check_status(drive, sense);
if (info->cd_flags & IDE_CD_FLAG_TOC_VALID)
return 0;
- /* Try to get the total cdrom capacity and sector size. */
+ /* try to get the total cdrom capacity and sector size */
stat = cdrom_read_capacity(drive, &toc->capacity, &sectors_per_frame,
sense);
if (stat)
toc->capacity = 0x1fffff;
set_capacity(info->disk, toc->capacity * sectors_per_frame);
- /* Save a private copy of te TOC capacity for error handling */
+ /* save a private copy of the TOC capacity for error handling */
drive->probed_capacity = toc->capacity * sectors_per_frame;
blk_queue_hardsect_size(drive->queue,
sectors_per_frame << SECTOR_BITS);
- /* First read just the header, so we know how long the TOC is. */
+ /* first read just the header, so we know how long the TOC is */
stat = cdrom_read_tocentry(drive, 0, 1, 0, (char *) &toc->hdr,
sizeof(struct atapi_toc_header), sense);
if (stat)
@@ -1416,7 +1400,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
if (ntracks > MAX_TRACKS)
ntracks = MAX_TRACKS;
- /* Now read the whole schmeer. */
+ /* now read the whole schmeer */
stat = cdrom_read_tocentry(drive, toc->hdr.first_track, 1, 0,
(char *)&toc->hdr,
sizeof(struct atapi_toc_header) +
@@ -1424,15 +1408,18 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
sizeof(struct atapi_toc_entry), sense);
if (stat && toc->hdr.first_track > 1) {
- /* Cds with CDI tracks only don't have any TOC entries,
- despite of this the returned values are
- first_track == last_track = number of CDI tracks + 1,
- so that this case is indistinguishable from the same
- layout plus an additional audio track.
- If we get an error for the regular case, we assume
- a CDI without additional audio tracks. In this case
- the readable TOC is empty (CDI tracks are not included)
- and only holds the Leadout entry. Heiko Eißfeldt */
+ /*
+ * Cds with CDI tracks only don't have any TOC entries, despite
+ * of this the returned values are
+ * first_track == last_track = number of CDI tracks + 1,
+ * so that this case is indistinguishable from the same layout
+ * plus an additional audio track. If we get an error for the
+ * regular case, we assume a CDI without additional audio
+ * tracks. In this case the readable TOC is empty (CDI tracks
+ * are not included) and only holds the Leadout entry.
+ *
+ * Heiko Eißfeldt.
+ */
ntracks = 0;
stat = cdrom_read_tocentry(drive, CDROM_LEADOUT, 1, 0,
(char *)&toc->hdr,
@@ -1473,9 +1460,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
toc->ent[i].addr.msf.frame);
}
- /* Read the multisession information. */
if (toc->hdr.first_track != CDROM_LEADOUT) {
- /* Read the multisession information. */
+ /* read the multisession information */
stat = cdrom_read_tocentry(drive, 0, 0, 1, (char *)&ms_tmp,
sizeof(ms_tmp), sense);
if (stat)
@@ -1488,7 +1474,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
}
if (info->cd_flags & IDE_CD_FLAG_TOCADDR_AS_BCD) {
- /* Re-read multisession information using MSF format */
+ /* re-read multisession information using MSF format */
stat = cdrom_read_tocentry(drive, 0, 1, 1, (char *)&ms_tmp,
sizeof(ms_tmp), sense);
if (stat)
@@ -1502,7 +1488,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
toc->xa_flag = (ms_tmp.hdr.first_track != ms_tmp.hdr.last_track);
- /* Now try to get the total cdrom capacity. */
+ /* now try to get the total cdrom capacity */
stat = cdrom_get_last_written(cdi, &last_written);
if (!stat && (last_written > toc->capacity)) {
toc->capacity = last_written;
@@ -1527,7 +1513,8 @@ int ide_cdrom_get_capabilities(ide_drive_t *drive, u8 *buf)
size -= ATAPI_CAPABILITIES_PAGE_PAD_SIZE;
init_cdrom_command(&cgc, buf, size, CGC_DATA_UNKNOWN);
- do { /* we seem to get stat=0x01,err=0x00 the first time (??) */
+ do {
+ /* we seem to get stat=0x01,err=0x00 the first time (??) */
stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CAPABILITIES_PAGE, 0);
if (!stat)
break;
@@ -1622,11 +1609,10 @@ int ide_cdrom_probe_capabilities(ide_drive_t *drive)
}
/*
- * we have to cheat a little here. the packet will eventually
- * be queued with ide_cdrom_packet(), which extracts the
- * drive from cdi->handle. Since this device hasn't been
- * registered with the Uniform layer yet, it can't do this.
- * Same goes for cdi->ops.
+ * We have to cheat a little here. the packet will eventually be queued
+ * with ide_cdrom_packet(), which extracts the drive from cdi->handle.
+ * Since this device hasn't been registered with the Uniform layer yet,
+ * it can't do this. Same goes for cdi->ops.
*/
cdi->handle = drive;
cdi->ops = &ide_cdrom_dops;
@@ -1695,9 +1681,7 @@ int ide_cdrom_probe_capabilities(ide_drive_t *drive)
return nslots;
}
-/*
- * standard prep_rq_fn that builds 10 byte cmds
- */
+/* standard prep_rq_fn that builds 10 byte cmds */
static int ide_cdrom_prep_fs(struct request_queue *q, struct request *rq)
{
int hard_sect = queue_hardsect_size(q);
@@ -1736,9 +1720,7 @@ static int ide_cdrom_prep_pc(struct request *rq)
{
u8 *c = rq->cmd;
- /*
- * Transform 6-byte read/write commands to the 10-byte version
- */
+ /* transform 6-byte read/write commands to the 10-byte version */
if (c[0] == READ_6 || c[0] == WRITE_6) {
c[8] = c[4];
c[5] = c[3];
@@ -1902,13 +1884,12 @@ int ide_cdrom_setup(ide_drive_t *drive)
id->fw_rev[4] == '1' && id->fw_rev[6] <= '2')
cd->cd_flags |= IDE_CD_FLAG_TOCTRACKS_AS_BCD;
else if (cd->cd_flags & IDE_CD_FLAG_SANYO_3CD)
- cdi->sanyo_slot = 3; /* 3 => use CD in slot 0 */
+ /* 3 => use CD in slot 0 */
+ cdi->sanyo_slot = 3;
nslots = ide_cdrom_probe_capabilities(drive);
- /*
- * set correct block size
- */
+ /* set correct block size */
blk_queue_hardsect_size(drive->queue, CD_FRAMESIZE);
if (drive->autotune == IDE_TUNE_DEFAULT ||
@@ -2092,7 +2073,7 @@ static struct block_device_operations idecd_ops = {
.revalidate_disk = idecd_revalidate_disk
};
-/* options */
+/* module options */
static char *ignore;
module_param(ignore, charp, 0400);
OpenPOWER on IntegriCloud