diff options
| -rw-r--r-- | drivers/block/Kconfig | 25 | ||||
| -rw-r--r-- | init/Kconfig | 50 | ||||
| -rw-r--r-- | init/do_mounts_rd.c | 182 | ||||
| -rw-r--r-- | init/initramfs.c | 123 | ||||
| -rw-r--r-- | lib/Makefile | 3 |
5 files changed, 184 insertions, 199 deletions
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 0344a8a..7955944 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -358,6 +358,31 @@ config BLK_DEV_XIP will prevent RAM block device backing store memory from being allocated from highmem (only a problem for highmem systems). +config RD_BZIP2 + bool "Initial ramdisk compressed using bzip2" + default n + depends on BLK_DEV_INITRD=y + help + Support loading of a bzip2 encoded initial ramdisk or cpio buffer + If unsure, say N. + +config RD_LZMA + bool "Initial ramdisk compressed using lzma" + default n + depends on BLK_DEV_INITRD=y + help + Support loading of a lzma encoded initial ramdisk or cpio buffer + If unsure, say N. + +config RD_GZIP + bool "Initial ramdisk compressed using gzip" + default y + depends on BLK_DEV_INITRD=y + select ZLIB_INFLATE + help + Support loading of a gzip encoded initial ramdisk or cpio buffer. + If unsure, say Y. + config CDROM_PKTCDVD tristate "Packet writing on CD/DVD media" depends on !UML diff --git a/init/Kconfig b/init/Kconfig index f628171..df84625 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -101,6 +101,56 @@ config LOCALVERSION_AUTO which is done within the script "scripts/setlocalversion".) +choice + prompt "Kernel compression mode" + default KERNEL_GZIP + help + The linux kernel is a kind of self-extracting executable. + Several compression algorithms are available, which differ + in efficiency, compression and decompression speed. + Compression speed is only relevant when building a kernel. + Decompression speed is relevant at each boot. + + If you have any problems with bzip2 or lzma compressed + kernels, mail me (Alain Knaff) <alain@knaff.lu>. (An older + version of this functionality (bzip2 only), for 2.4, was + supplied by Christian Ludwig) + + High compression options are mostly useful for users, who + are low on disk space (embedded systems), but for whom ram + size matters less. + + If in doubt, select 'gzip' + +config KERNEL_GZIP + bool "Gzip" + help + The old and tried gzip compression. Its compression ratio is + the poorest among the 3 choices; however its speed (both + compression and decompression) is the fastest. + +config KERNEL_BZIP2 + bool "Bzip2" + help + Its compression ratio and speed is intermediate. + Decompression speed is slowest among the 3. + The kernel size is about 10 per cent smaller with bzip2, + in comparison to gzip. + Bzip2 uses a large amount of memory. For modern kernels + you will need at least 8MB RAM or more for booting. + +config KERNEL_LZMA + bool "LZMA" + help + The most recent compression algorithm. + Its ratio is best, decompression speed is between the other + 2. Compression is slowest. + The kernel size is about 33 per cent smaller with lzma, + in comparison to gzip. + +endchoice + + config SWAP bool "Support for paging of anonymous memory (swap)" depends on MMU && BLOCK diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c index a7c748f..dcaeb1f 100644 --- a/init/do_mounts_rd.c +++ b/init/do_mounts_rd.c @@ -10,6 +10,12 @@ #include "do_mounts.h" +#include <linux/decompress/generic.h> + +#include <linux/decompress/bunzip2.h> +#include <linux/decompress/unlzma.h> +#include <linux/decompress/inflate.h> + int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */ static int __init prompt_ramdisk(char *str) @@ -28,7 +34,7 @@ static int __init ramdisk_start_setup(char *str) } __setup("ramdisk_start=", ramdisk_start_setup); -static int __init crd_load(int in_fd, int out_fd); +static int __init crd_load(int in_fd, int out_fd, decompress_fn deco); /* * This routine tries to find a RAM disk image to load, and returns the @@ -44,7 +50,7 @@ static int __init crd_load(int in_fd, int out_fd); * gzip */ static int __init -identify_ramdisk_image(int fd, int start_block) +identify_ramdisk_image(int fd, int start_block, decompress_fn *decompressor) { const int size = 512; struct minix_super_block *minixsb; @@ -70,6 +76,7 @@ identify_ramdisk_image(int fd, int start_block) sys_lseek(fd, start_block * BLOCK_SIZE, 0); sys_read(fd, buf, size); +#ifdef CONFIG_RD_GZIP /* * If it matches the gzip magic numbers, return 0 */ @@ -77,9 +84,39 @@ identify_ramdisk_image(int fd, int start_block) printk(KERN_NOTICE "RAMDISK: Compressed image found at block %d\n", start_block); + *decompressor = gunzip; + nblocks = 0; + goto done; + } +#endif + +#ifdef CONFIG_RD_BZIP2 + /* + * If it matches the bzip2 magic numbers, return -1 + */ + if (buf[0] == 0x42 && (buf[1] == 0x5a)) { + printk(KERN_NOTICE + "RAMDISK: Bzipped image found at block %d\n", + start_block); + *decompressor = bunzip2; + nblocks = 0; + goto done; + } +#endif + +#ifdef CONFIG_RD_LZMA + /* + * If it matches the lzma magic numbers, return -1 + */ + if (buf[0] == 0x5d && (buf[1] == 0x00)) { + printk(KERN_NOTICE + "RAMDISK: Lzma image found at block %d\n", + start_block); + *decompressor = unlzma; nblocks = 0; goto done; } +#endif /* romfs is at block zero too */ if (romfsb->word0 == ROMSB_WORD0 && @@ -143,6 +180,7 @@ int __init rd_load_image(char *from) int nblocks, i, disk; char *buf = NULL; unsigned short rotate = 0; + decompress_fn decompressor = NULL; #if !defined(CONFIG_S390) && !defined(CONFIG_PPC_ISERIES) char rotator[4] = { '|' , '/' , '-' , '\\' }; #endif @@ -155,12 +193,12 @@ int __init rd_load_image(char *from) if (in_fd < 0) goto noclose_input; - nblocks = identify_ramdisk_image(in_fd, rd_image_start); + nblocks = identify_ramdisk_image(in_fd, rd_image_start, &decompressor); if (nblocks < 0) goto done; if (nblocks == 0) { - if (crd_load(in_fd, out_fd) == 0) + if (crd_load(in_fd, out_fd, decompressor) == 0) goto successful_load; goto done; } @@ -259,138 +297,48 @@ int __init rd_load_disk(int n) return rd_load_image("/dev/root"); } -/* - * gzip declarations - */ - -#define OF(args) args - -#ifndef memzero -#define memzero(s, n) memset ((s), 0, (n)) -#endif - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define INBUFSIZ 4096 -#define WSIZE 0x8000 /* window size--must be a power of two, and */ - /* at least 32K for zip's deflate method */ - -static uch *inbuf; -static uch *window; - -static unsigned insize; /* valid bytes in inbuf */ -static unsigned inptr; /* index of next byte to be processed in inbuf */ -static unsigned outcnt; /* bytes in output buffer */ static int exit_code; -static int unzip_error; -static long bytes_out; +static int decompress_error; static int crd_infd, crd_outfd; -#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) - -/* Diagnostic functions (stubbed out) */ -#define Assert(cond,msg) -#define Trace(x) -#define Tracev(x) -#define Tracevv(x) -#define Tracec(c,x) -#define Tracecv(c,x) - -#define STATIC static -#define INIT __init - -static int __init fill_inbuf(void); -static void __init flush_window(void); -static void __init error(char *m); - -#define NO_INFLATE_MALLOC - -#include "../lib/inflate.c" - -/* =========================================================================== - * Fill the input buffer. This is called only when the buffer is empty - * and at least one byte is really needed. - * Returning -1 does not guarantee that gunzip() will ever return. - */ -static int __init fill_inbuf(void) +static int __init compr_fill(void *buf, unsigned int len) { - if (exit_code) return -1; - - insize = sys_read(crd_infd, inbuf, INBUFSIZ); - if (insize == 0) { - error("RAMDISK: ran out of compressed data"); - return -1; - } - - inptr = 1; - - return inbuf[0]; + int r = sys_read(crd_infd, buf, len); + if (r < 0) + printk(KERN_ERR "RAMDISK: error while reading compressed data"); + else if (r == 0) + printk(KERN_ERR "RAMDISK: EOF while reading compressed data"); + return r; } -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ -static void __init flush_window(void) +static int __init compr_flush(void *window, unsigned int outcnt) { - ulg c = crc; /* temporary variable */ - unsigned n, written; - uch *in, ch; - - written = sys_write(crd_outfd, window, outcnt); - if (written != outcnt && unzip_error == 0) { - printk(KERN_ERR "RAMDISK: incomplete write (%d != %d) %ld\n", - written, outcnt, bytes_out); - unzip_error = 1; - } - in = window; - for (n = 0; n < outcnt; n++) { - ch = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - outcnt = 0; + int written = sys_write(crd_outfd, window, outcnt); + if (written != outcnt) { + if (decompress_error == 0) + printk(KERN_ERR + "RAMDISK: incomplete write (%d != %d)\n", + written, outcnt); + decompress_error = 1; + return -1; + } + return outcnt; } static void __init error(char *x) { printk(KERN_ERR "%s\n", x); exit_code = 1; - unzip_error = 1; + decompress_error = 1; } -static int __init crd_load(int in_fd, int out_fd) +static int __init crd_load(int in_fd, int out_fd, decompress_fn deco) { int result; - - insize = 0; /* valid bytes in inbuf */ - inptr = 0; /* index of next byte to be processed in inbuf */ - outcnt = 0; /* bytes in output buffer */ - exit_code = 0; - bytes_out = 0; - crc = (ulg)0xffffffffL; /* shift register contents */ - crd_infd = in_fd; crd_outfd = out_fd; - inbuf = kmalloc(INBUFSIZ, GFP_KERNEL); - if (!inbuf) { - printk(KERN_ERR "RAMDISK: Couldn't allocate gzip buffer\n"); - return -1; - } - window = kmalloc(WSIZE, GFP_KERNEL); - if (!window) { - printk(KERN_ERR "RAMDISK: Couldn't allocate gzip window\n"); - kfree(inbuf); - return -1; - } - makecrc(); - result = gunzip(); - if (unzip_error) + result = deco(NULL, 0, compr_fill, compr_flush, NULL, NULL, error); + if (decompress_error) result = 1; - kfree(inbuf); - kfree(window); return result; } diff --git a/init/initramfs.c b/init/initramfs.c index 4f5ba75..40bd4fb 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -389,11 +389,14 @@ static int __init write_buffer(char *buf, unsigned len) return len - count; } -static void __init flush_buffer(char *buf, unsigned len) + +static int __init flush_buffer(void *bufv, unsigned len) { + char *buf = (char *) bufv; int written; + int origLen = len; if (message) - return; + return -1; while ((written = write_buffer(buf, len)) < len && !message) { char c = buf[written]; if (c == '0') { @@ -407,73 +410,14 @@ static void __init flush_buffer(char *buf, unsigned len) } else error("junk in compressed archive"); } + return origLen; } -/* - * gzip declarations - */ - -#define OF(args) args - -#ifndef memzero -#define memzero(s, n) memset ((s), 0, (n)) -#endif - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x8000 /* window size--must be a power of two, and */ - /* at least 32K for zip's deflate method */ - -static uch *inbuf; -static uch *window; - -static unsigned insize; /* valid bytes in inbuf */ -static unsigned inptr; /* index of next byte to be processed in inbuf */ -static unsigned outcnt; /* bytes in output buffer */ -static long bytes_out; - -#define get_byte() (inptr < insize ? inbuf[inptr++] : -1) - -/* Diagnostic functions (stubbed out) */ -#define Assert(cond,msg) -#define Trace(x) -#define Tracev(x) -#define Tracevv(x) -#define Tracec(c,x) -#define Tracecv(c,x) - -#define STATIC static -#define INIT __init - -static void __init flush_window(void); -static void __init error(char *m); - -#define NO_INFLATE_MALLOC +static unsigned my_inptr; /* index of next byte to be processed in inbuf */ -#include "../lib/inflate.c" - -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ -static void __init flush_window(void) -{ - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, ch; - - flush_buffer(window, outcnt); - in = window; - for (n = 0; n < outcnt; n++) { - ch = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - outcnt = 0; -} +#include <linux/decompress/bunzip2.h> +#include <linux/decompress/unlzma.h> +#include <linux/decompress/inflate.h> static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only) { @@ -482,9 +426,10 @@ static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only) header_buf = kmalloc(110, GFP_KERNEL); symlink_buf = kmalloc(PATH_MAX + N_ALIGN(PATH_MAX) + 1, GFP_KERNEL); name_buf = kmalloc(N_ALIGN(PATH_MAX), GFP_KERNEL); - window = kmalloc(WSIZE, GFP_KERNEL); - if (!window || !header_buf || !symlink_buf || !name_buf) + + if (!header_buf || !symlink_buf || !name_buf) panic("can't allocate buffers"); + state = Start; this_header = 0; message = NULL; @@ -504,22 +449,38 @@ static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only) continue; } this_header = 0; - insize = len; - inbuf = buf; - inptr = 0; - outcnt = 0; /* bytes in output buffer */ - bytes_out = 0; - crc = (ulg)0xffffffffL; /* shift register contents */ - makecrc(); - gunzip(); + if (!gunzip(buf, len, NULL, flush_buffer, NULL, + &my_inptr, error) && + message == NULL) + goto ok; + +#ifdef CONFIG_RD_BZIP2 + message = NULL; /* Zero out message, or else cpio will + think an error has already occured */ + if (!bunzip2(buf, len, NULL, flush_buffer, NULL, + &my_inptr, error) && + message == NULL) { + goto ok; + } +#endif + +#ifdef CONFIG_RD_LZMA + message = NULL; /* Zero out message, or else cpio will + think an error has already occured */ + if (!unlzma(buf, len, NULL, flush_buffer, NULL, + &my_inptr, error) && + message == NULL) { + goto ok; + } +#endif +ok: if (state != Reset) - error("junk in gzipped archive"); - this_header = saved_offset + inptr; - buf += inptr; - len -= inptr; + error("junk in compressed archive"); + this_header = saved_offset + my_inptr; + buf += my_inptr; + len -= my_inptr; } dir_utime(); - kfree(window); kfree(name_buf); kfree(symlink_buf); kfree(header_buf); diff --git a/lib/Makefile b/lib/Makefile index 32b0e64..e2a21d5 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -11,7 +11,8 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \ rbtree.o radix-tree.o dump_stack.o \ idr.o int_sqrt.o extable.o prio_tree.o \ sha1.o irq_regs.o reciprocal_div.o argv_split.o \ - proportions.o prio_heap.o ratelimit.o show_mem.o is_single_threaded.o + proportions.o prio_heap.o ratelimit.o show_mem.o is_single_threaded.o \ + decompress_inflate.o decompress_bunzip2.o decompress_unlzma.o lib-$(CONFIG_MMU) += ioremap.o lib-$(CONFIG_SMP) += cpumask.o |
