summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/arm/Samsung-S3C24XX/GPIO.txt10
-rw-r--r--MAINTAINERS95
-rw-r--r--arch/arm/Kconfig250
-rw-r--r--arch/arm/Makefile124
-rw-r--r--arch/arm/boot/compressed/Makefile5
-rw-r--r--arch/arm/boot/compressed/head.S6
-rw-r--r--arch/arm/common/Kconfig12
-rw-r--r--arch/arm/common/Makefile1
-rw-r--r--arch/arm/common/clkdev.c18
-rw-r--r--arch/arm/common/sharpsl_pm.c859
-rw-r--r--arch/arm/common/vic.c221
-rw-r--r--arch/arm/configs/cm_x300_defconfig329
-rw-r--r--arch/arm/configs/davinci_all_defconfig21
-rw-r--r--arch/arm/configs/ep93xx_defconfig853
-rw-r--r--arch/arm/configs/kirkwood_defconfig5
-rw-r--r--arch/arm/configs/magician_defconfig5
-rw-r--r--arch/arm/configs/mx21_defconfig1170
-rw-r--r--arch/arm/configs/omap3_evm_defconfig1528
-rw-r--r--arch/arm/configs/omap_4430sdp_defconfig866
-rw-r--r--arch/arm/configs/omap_zoom2_defconfig1211
-rw-r--r--arch/arm/configs/orion5x_defconfig3
-rw-r--r--arch/arm/configs/rx51_defconfig2
-rw-r--r--arch/arm/configs/stmp378x_defconfig1141
-rw-r--r--arch/arm/configs/stmp37xx_defconfig1002
-rw-r--r--arch/arm/configs/u300_defconfig1115
-rw-r--r--arch/arm/configs/w90p910_defconfig423
-rw-r--r--arch/arm/include/asm/cputype.h25
-rw-r--r--arch/arm/include/asm/hardware/arm_twd.h21
-rw-r--r--arch/arm/include/asm/hardware/cache-l2x0.h2
-rw-r--r--arch/arm/include/asm/hardware/pl080.h138
-rw-r--r--arch/arm/include/asm/hardware/vic.h2
-rw-r--r--arch/arm/include/asm/localtimer.h63
-rw-r--r--arch/arm/include/asm/mach/map.h8
-rw-r--r--arch/arm/include/asm/pgtable.h2
-rw-r--r--arch/arm/include/asm/processor.h1
-rw-r--r--arch/arm/include/asm/ptrace.h17
-rw-r--r--arch/arm/include/asm/sizes.h1
-rw-r--r--arch/arm/include/asm/smp.h42
-rw-r--r--arch/arm/include/asm/smp_scu.h7
-rw-r--r--arch/arm/include/asm/smp_twd.h12
-rw-r--r--arch/arm/include/asm/tlbflush.h26
-rw-r--r--arch/arm/include/asm/uaccess.h2
-rw-r--r--arch/arm/kernel/Makefile2
-rw-r--r--arch/arm/kernel/entry-armv.S3
-rw-r--r--arch/arm/kernel/entry-common.S3
-rw-r--r--arch/arm/kernel/process.c2
-rw-r--r--arch/arm/kernel/signal.c8
-rw-r--r--arch/arm/kernel/smp.c131
-rw-r--r--arch/arm/kernel/smp_scu.c48
-rw-r--r--arch/arm/kernel/smp_twd.c175
-rw-r--r--arch/arm/kernel/vmlinux.lds.S2
-rw-r--r--arch/arm/lib/Makefile3
-rw-r--r--arch/arm/lib/clear_user.S3
-rw-r--r--arch/arm/lib/copy_to_user.S3
-rw-r--r--arch/arm/lib/uaccess_with_memcpy.c228
-rw-r--r--arch/arm/mach-at91/board-afeb-9260v1.c6
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c9
-rw-r--r--arch/arm/mach-at91/clock.c151
-rw-r--r--arch/arm/mach-at91/include/mach/at91_pmc.h26
-rw-r--r--arch/arm/mach-davinci/Kconfig43
-rw-r--r--arch/arm/mach-davinci/Makefile13
-rw-r--r--arch/arm/mach-davinci/board-dm355-evm.c298
-rw-r--r--arch/arm/mach-davinci/board-dm355-leopard.c296
-rw-r--r--arch/arm/mach-davinci/board-dm644x-evm.c68
-rw-r--r--arch/arm/mach-davinci/board-dm646x-evm.c262
-rw-r--r--arch/arm/mach-davinci/board-sffsdr.c189
-rw-r--r--arch/arm/mach-davinci/clock.c10
-rw-r--r--arch/arm/mach-davinci/clock.h4
-rw-r--r--arch/arm/mach-davinci/common.c108
-rw-r--r--arch/arm/mach-davinci/cp_intc.c161
-rw-r--r--arch/arm/mach-davinci/devices.c211
-rw-r--r--arch/arm/mach-davinci/dm355.c730
-rw-r--r--arch/arm/mach-davinci/dm644x.c204
-rw-r--r--arch/arm/mach-davinci/dm646x.c636
-rw-r--r--arch/arm/mach-davinci/gpio.c63
-rw-r--r--arch/arm/mach-davinci/id.c116
-rw-r--r--arch/arm/mach-davinci/include/mach/board-dm6446evm.h20
-rw-r--r--arch/arm/mach-davinci/include/mach/common.h55
-rw-r--r--arch/arm/mach-davinci/include/mach/cp_intc.h57
-rw-r--r--arch/arm/mach-davinci/include/mach/cputype.h29
-rw-r--r--arch/arm/mach-davinci/include/mach/debug-macro.S31
-rw-r--r--arch/arm/mach-davinci/include/mach/dm355.h22
-rw-r--r--arch/arm/mach-davinci/include/mach/dm644x.h1
-rw-r--r--arch/arm/mach-davinci/include/mach/dm646x.h26
-rw-r--r--arch/arm/mach-davinci/include/mach/edma.h4
-rw-r--r--arch/arm/mach-davinci/include/mach/emac.h36
-rw-r--r--arch/arm/mach-davinci/include/mach/entry-macro.S25
-rw-r--r--arch/arm/mach-davinci/include/mach/gpio.h14
-rw-r--r--arch/arm/mach-davinci/include/mach/irqs.h3
-rw-r--r--arch/arm/mach-davinci/include/mach/memory.h1
-rw-r--r--arch/arm/mach-davinci/include/mach/mmc.h33
-rw-r--r--arch/arm/mach-davinci/include/mach/mux.h16
-rw-r--r--arch/arm/mach-davinci/include/mach/psc.h8
-rw-r--r--arch/arm/mach-davinci/include/mach/serial.h4
-rw-r--r--arch/arm/mach-davinci/include/mach/sram.h27
-rw-r--r--arch/arm/mach-davinci/include/mach/time.h35
-rw-r--r--arch/arm/mach-davinci/include/mach/uncompress.h19
-rw-r--r--arch/arm/mach-davinci/io.c38
-rw-r--r--arch/arm/mach-davinci/irq.c217
-rw-r--r--arch/arm/mach-davinci/mux.c24
-rw-r--r--arch/arm/mach-davinci/psc.c32
-rw-r--r--arch/arm/mach-davinci/serial.c74
-rw-r--r--arch/arm/mach-davinci/sram.c74
-rw-r--r--arch/arm/mach-davinci/time.c247
-rw-r--r--arch/arm/mach-ep93xx/Kconfig82
-rw-r--r--arch/arm/mach-ep93xx/Makefile8
-rw-r--r--arch/arm/mach-ep93xx/Makefile.boot7
-rw-r--r--arch/arm/mach-ep93xx/clock.c58
-rw-r--r--arch/arm/mach-ep93xx/core.c27
-rw-r--r--arch/arm/mach-ep93xx/edb9302.c68
-rw-r--r--arch/arm/mach-ep93xx/edb9302a.c68
-rw-r--r--arch/arm/mach-ep93xx/edb9307.c68
-rw-r--r--arch/arm/mach-ep93xx/edb9307a.c80
-rw-r--r--arch/arm/mach-ep93xx/edb9312.c69
-rw-r--r--arch/arm/mach-ep93xx/edb9315.c68
-rw-r--r--arch/arm/mach-ep93xx/edb9315a.c68
-rw-r--r--arch/arm/mach-ep93xx/edb93xx.c217
-rw-r--r--arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h20
-rw-r--r--arch/arm/mach-ep93xx/include/mach/memory.h6
-rw-r--r--arch/arm/mach-imx/Kconfig11
-rw-r--r--arch/arm/mach-imx/Makefile18
-rw-r--r--arch/arm/mach-imx/Makefile.boot2
-rw-r--r--arch/arm/mach-imx/clock.c210
-rw-r--r--arch/arm/mach-imx/cpufreq.c315
-rw-r--r--arch/arm/mach-imx/dma.c597
-rw-r--r--arch/arm/mach-imx/generic.c271
-rw-r--r--arch/arm/mach-imx/generic.h16
-rw-r--r--arch/arm/mach-imx/include/mach/debug-macro.S34
-rw-r--r--arch/arm/mach-imx/include/mach/dma.h56
-rw-r--r--arch/arm/mach-imx/include/mach/entry-macro.S32
-rw-r--r--arch/arm/mach-imx/include/mach/gpio.h106
-rw-r--r--arch/arm/mach-imx/include/mach/hardware.h91
-rw-r--r--arch/arm/mach-imx/include/mach/imx-dma.h98
-rw-r--r--arch/arm/mach-imx/include/mach/imx-regs.h376
-rw-r--r--arch/arm/mach-imx/include/mach/imx-uart.h12
-rw-r--r--arch/arm/mach-imx/include/mach/irqs.h121
-rw-r--r--arch/arm/mach-imx/include/mach/mmc.h15
-rw-r--r--arch/arm/mach-imx/include/mach/mx1ads.h36
-rw-r--r--arch/arm/mach-imx/include/mach/spi_imx.h72
-rw-r--r--arch/arm/mach-imx/include/mach/uncompress.h71
-rw-r--r--arch/arm/mach-imx/irq.c311
-rw-r--r--arch/arm/mach-imx/leds-mx1ads.c53
-rw-r--r--arch/arm/mach-imx/leds.c31
-rw-r--r--arch/arm/mach-imx/leds.h9
-rw-r--r--arch/arm/mach-imx/mx1ads.c180
-rw-r--r--arch/arm/mach-imx/time.c220
-rw-r--r--arch/arm/mach-ixp4xx/Kconfig6
-rw-r--r--arch/arm/mach-ixp4xx/Makefile1
-rw-r--r--arch/arm/mach-ixp4xx/goramo_mlr.c507
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/cpu.h7
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/qmgr.h69
-rw-r--r--arch/arm/mach-ixp4xx/ixp4xx_npe.c9
-rw-r--r--arch/arm/mach-ixp4xx/ixp4xx_qmgr.c135
-rw-r--r--arch/arm/mach-kirkwood/Kconfig6
-rw-r--r--arch/arm/mach-kirkwood/Makefile3
-rw-r--r--arch/arm/mach-kirkwood/addr-map.c14
-rw-r--r--arch/arm/mach-kirkwood/common.c159
-rw-r--r--arch/arm/mach-kirkwood/common.h4
-rw-r--r--arch/arm/mach-kirkwood/cpuidle.c96
-rw-r--r--arch/arm/mach-kirkwood/db88f6281-bp-setup.c31
-rw-r--r--arch/arm/mach-kirkwood/include/mach/bridge-regs.h21
-rw-r--r--arch/arm/mach-kirkwood/include/mach/io.h25
-rw-r--r--arch/arm/mach-kirkwood/include/mach/kirkwood.h18
-rw-r--r--arch/arm/mach-kirkwood/mpp.c3
-rw-r--r--arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c173
-rw-r--r--arch/arm/mach-kirkwood/pcie.c4
-rw-r--r--arch/arm/mach-kirkwood/rd88f6192-nas-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/rd88f6281-setup.c31
-rw-r--r--arch/arm/mach-kirkwood/sheevaplug-setup.c32
-rw-r--r--arch/arm/mach-mmp/include/mach/irqs.h1
-rw-r--r--arch/arm/mach-mmp/include/mach/mfp-pxa168.h27
-rw-r--r--arch/arm/mach-mmp/include/mach/mfp-pxa910.h8
-rw-r--r--arch/arm/mach-mmp/include/mach/pxa168.h44
-rw-r--r--arch/arm/mach-mmp/include/mach/pxa910.h44
-rw-r--r--arch/arm/mach-mmp/include/mach/regs-apbc.h14
-rw-r--r--arch/arm/mach-mmp/pxa168.c18
-rw-r--r--arch/arm/mach-mmp/pxa910.c18
-rw-r--r--arch/arm/mach-mv78xx0/irq.c3
-rw-r--r--arch/arm/mach-mx1/generic.c5
-rw-r--r--arch/arm/mach-mx1/mx1ads.c92
-rw-r--r--arch/arm/mach-mx1/scb9328.c2
-rw-r--r--arch/arm/mach-mx2/Kconfig21
-rw-r--r--arch/arm/mach-mx2/Makefile4
-rw-r--r--arch/arm/mach-mx2/clock_imx21.c77
-rw-r--r--arch/arm/mach-mx2/generic.c12
-rw-r--r--arch/arm/mach-mx2/mx21ads.c286
-rw-r--r--arch/arm/mach-mx2/mx27ads.c315
-rw-r--r--arch/arm/mach-mx2/mx27lite.c95
-rw-r--r--arch/arm/mach-mx2/mx27pdk.c95
-rw-r--r--arch/arm/mach-mx2/pcm038.c195
-rw-r--r--arch/arm/mach-mx2/pcm970-baseboard.c123
-rw-r--r--arch/arm/mach-mx3/Kconfig34
-rw-r--r--arch/arm/mach-mx3/Makefile4
-rw-r--r--arch/arm/mach-mx3/armadillo5x0.c295
-rw-r--r--arch/arm/mach-mx3/clock-imx35.c38
-rw-r--r--arch/arm/mach-mx3/clock.c17
-rw-r--r--arch/arm/mach-mx3/devices.c66
-rw-r--r--arch/arm/mach-mx3/devices.h4
-rw-r--r--arch/arm/mach-mx3/iomux.c25
-rw-r--r--arch/arm/mach-mx3/mm.c11
-rw-r--r--arch/arm/mach-mx3/mx31ads.c4
-rw-r--r--arch/arm/mach-mx3/mx31lilly-db.c216
-rw-r--r--arch/arm/mach-mx3/mx31lilly.c155
-rw-r--r--arch/arm/mach-mx3/mx31lite.c74
-rw-r--r--arch/arm/mach-mx3/mx31moboard-devboard.c123
-rw-r--r--arch/arm/mach-mx3/mx31moboard-marxbot.c128
-rw-r--r--arch/arm/mach-mx3/mx31moboard.c117
-rw-r--r--arch/arm/mach-mx3/mx31pdk.c200
-rw-r--r--arch/arm/mach-mx3/mx35pdk.c104
-rw-r--r--arch/arm/mach-mx3/pcm037.c282
-rw-r--r--arch/arm/mach-mx3/pcm043.c252
-rw-r--r--arch/arm/mach-mx3/qong.c2
-rw-r--r--arch/arm/mach-netx/generic.c2
-rw-r--r--arch/arm/mach-omap1/Kconfig1
-rw-r--r--arch/arm/mach-omap1/Makefile4
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c13
-rw-r--r--arch/arm/mach-omap1/clock.c2
-rw-r--r--arch/arm/mach-omap1/pm.c11
-rw-r--r--arch/arm/mach-omap1/pm.h (renamed from arch/arm/plat-omap/include/mach/pm.h)85
-rw-r--r--arch/arm/mach-omap1/serial.c3
-rw-r--r--arch/arm/mach-omap1/sleep.S2
-rw-r--r--arch/arm/mach-omap2/Kconfig14
-rw-r--r--arch/arm/mach-omap2/Makefile39
-rw-r--r--arch/arm/mach-omap2/board-2430sdp.c114
-rw-r--r--arch/arm/mach-omap2/board-3430sdp.c87
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c94
-rw-r--r--arch/arm/mach-omap2/board-ldp.c219
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c108
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c329
-rw-r--r--arch/arm/mach-omap2/board-omap3pandora.c197
-rw-r--r--arch/arm/mach-omap2/board-overo.c79
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c232
-rw-r--r--arch/arm/mach-omap2/board-zoom-debugboard.c160
-rw-r--r--arch/arm/mach-omap2/board-zoom2.c110
-rw-r--r--arch/arm/mach-omap2/clock.c18
-rw-r--r--arch/arm/mach-omap2/clock24xx.c23
-rw-r--r--arch/arm/mach-omap2/clock24xx.h11
-rw-r--r--arch/arm/mach-omap2/clock34xx.c23
-rw-r--r--arch/arm/mach-omap2/clock34xx.h35
-rw-r--r--arch/arm/mach-omap2/clockdomains.h2
-rw-r--r--arch/arm/mach-omap2/cm-regbits-34xx.h14
-rw-r--r--arch/arm/mach-omap2/cm.h6
-rw-r--r--arch/arm/mach-omap2/gpmc-onenand.c330
-rw-r--r--arch/arm/mach-omap2/gpmc-smc91x.c189
-rw-r--r--arch/arm/mach-omap2/gpmc.c6
-rw-r--r--arch/arm/mach-omap2/id.c8
-rw-r--r--arch/arm/mach-omap2/io.c52
-rw-r--r--arch/arm/mach-omap2/iommu2.c323
-rw-r--r--arch/arm/mach-omap2/irq.c18
-rw-r--r--arch/arm/mach-omap2/mmc-twl4030.c280
-rw-r--r--arch/arm/mach-omap2/mmc-twl4030.h3
-rw-r--r--arch/arm/mach-omap2/omap-headsmp.S46
-rw-r--r--arch/arm/mach-omap2/omap-smp.c178
-rw-r--r--arch/arm/mach-omap2/omap3-iommu.c105
-rw-r--r--arch/arm/mach-omap2/pm-debug.c152
-rw-r--r--arch/arm/mach-omap2/pm.c111
-rw-r--r--arch/arm/mach-omap2/pm.h38
-rw-r--r--arch/arm/mach-omap2/pm24xx.c549
-rw-r--r--arch/arm/mach-omap2/pm34xx.c710
-rw-r--r--arch/arm/mach-omap2/prcm-common.h2
-rw-r--r--arch/arm/mach-omap2/prm.h207
-rw-r--r--arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h55
-rw-r--r--arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h54
-rw-r--r--arch/arm/mach-omap2/sdrc.c24
-rw-r--r--arch/arm/mach-omap2/sdrc2xxx.c5
-rw-r--r--arch/arm/mach-omap2/serial.c465
-rw-r--r--arch/arm/mach-omap2/sleep24xx.S1
-rw-r--r--arch/arm/mach-omap2/sleep34xx.S436
-rw-r--r--arch/arm/mach-omap2/sram242x.S10
-rw-r--r--arch/arm/mach-omap2/sram243x.S10
-rw-r--r--arch/arm/mach-omap2/sram34xx.S129
-rw-r--r--arch/arm/mach-omap2/timer-gp.c13
-rw-r--r--arch/arm/mach-omap2/timer-mpu.c34
-rw-r--r--arch/arm/mach-omap2/usb-musb.c21
-rw-r--r--arch/arm/mach-orion5x/addr-map.c14
-rw-r--r--arch/arm/mach-orion5x/common.c42
-rw-r--r--arch/arm/mach-orion5x/common.h2
-rw-r--r--arch/arm/mach-orion5x/include/mach/bridge-regs.h4
-rw-r--r--arch/arm/mach-orion5x/include/mach/orion5x.h6
-rw-r--r--arch/arm/mach-orion5x/include/mach/system.h2
-rw-r--r--arch/arm/mach-orion5x/mpp.c3
-rw-r--r--arch/arm/mach-orion5x/mss2-setup.c4
-rw-r--r--arch/arm/mach-orion5x/ts78xx-fpga.h1
-rw-r--r--arch/arm/mach-orion5x/ts78xx-setup.c58
-rw-r--r--arch/arm/mach-orion5x/wnr854t-setup.c16
-rw-r--r--arch/arm/mach-pxa/Kconfig25
-rw-r--r--arch/arm/mach-pxa/Makefile3
-rw-r--r--arch/arm/mach-pxa/clock.c17
-rw-r--r--arch/arm/mach-pxa/cm-x270.c4
-rw-r--r--arch/arm/mach-pxa/cm-x300.c55
-rw-r--r--arch/arm/mach-pxa/corgi.c47
-rw-r--r--arch/arm/mach-pxa/corgi_pm.c3
-rw-r--r--arch/arm/mach-pxa/cpufreq-pxa2xx.c104
-rw-r--r--arch/arm/mach-pxa/csb726.c20
-rw-r--r--arch/arm/mach-pxa/devices.c4
-rw-r--r--arch/arm/mach-pxa/em-x270.c173
-rw-r--r--arch/arm/mach-pxa/ezx.c177
-rw-r--r--arch/arm/mach-pxa/hx4700.c851
-rw-r--r--arch/arm/mach-pxa/imote2.c52
-rw-r--r--arch/arm/mach-pxa/include/mach/hx4700.h131
-rw-r--r--arch/arm/mach-pxa/include/mach/irqs.h18
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa320.h14
-rw-r--r--arch/arm/mach-pxa/include/mach/palmld.h1
-rw-r--r--arch/arm/mach-pxa/include/mach/pm.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa27x.h3
-rw-r--r--arch/arm/mach-pxa/include/mach/sharpsl_pm.h (renamed from arch/arm/include/asm/hardware/sharpsl_pm.h)8
-rw-r--r--arch/arm/mach-pxa/include/mach/uncompress.h3
-rw-r--r--arch/arm/mach-pxa/littleton.c82
-rw-r--r--arch/arm/mach-pxa/magician.c14
-rw-r--r--arch/arm/mach-pxa/mainstone.c2
-rw-r--r--arch/arm/mach-pxa/mioa701.c4
-rw-r--r--arch/arm/mach-pxa/palmld.c42
-rw-r--r--arch/arm/mach-pxa/palmt5.c46
-rw-r--r--arch/arm/mach-pxa/palmte2.c32
-rw-r--r--arch/arm/mach-pxa/palmtx.c45
-rw-r--r--arch/arm/mach-pxa/pcm990-baseboard.c2
-rw-r--r--arch/arm/mach-pxa/pm.c4
-rw-r--r--arch/arm/mach-pxa/poodle.c17
-rw-r--r--arch/arm/mach-pxa/pxa27x.c21
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c4
-rw-r--r--arch/arm/mach-pxa/saar.c2
-rw-r--r--arch/arm/mach-pxa/sharpsl.h4
-rw-r--r--arch/arm/mach-pxa/sharpsl_pm.c863
-rw-r--r--arch/arm/mach-pxa/spitz.c78
-rw-r--r--arch/arm/mach-pxa/spitz_pm.c3
-rw-r--r--arch/arm/mach-pxa/stargate2.c796
-rw-r--r--arch/arm/mach-pxa/tosa.c2
-rw-r--r--arch/arm/mach-pxa/trizeps4.c2
-rw-r--r--arch/arm/mach-pxa/viper.c2
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa300.c2
-rw-r--r--arch/arm/mach-realview/Kconfig17
-rw-r--r--arch/arm/mach-realview/Makefile4
-rw-r--r--arch/arm/mach-realview/core.c10
-rw-r--r--arch/arm/mach-realview/core.h3
-rw-r--r--arch/arm/mach-realview/include/mach/board-eb.h105
-rw-r--r--arch/arm/mach-realview/include/mach/board-pb1176.h80
-rw-r--r--arch/arm/mach-realview/include/mach/board-pb11mp.h101
-rw-r--r--arch/arm/mach-realview/include/mach/board-pba8.h77
-rw-r--r--arch/arm/mach-realview/include/mach/board-pbx.h108
-rw-r--r--arch/arm/mach-realview/include/mach/debug-macro.S3
-rw-r--r--arch/arm/mach-realview/include/mach/irqs-eb.h129
-rw-r--r--arch/arm/mach-realview/include/mach/irqs-pb1176.h99
-rw-r--r--arch/arm/mach-realview/include/mach/irqs-pb11mp.h122
-rw-r--r--arch/arm/mach-realview/include/mach/irqs-pba8.h98
-rw-r--r--arch/arm/mach-realview/include/mach/irqs-pbx.h115
-rw-r--r--arch/arm/mach-realview/include/mach/irqs.h9
-rw-r--r--arch/arm/mach-realview/include/mach/scu.h13
-rw-r--r--arch/arm/mach-realview/include/mach/uncompress.h3
-rw-r--r--arch/arm/mach-realview/localtimer.c188
-rw-r--r--arch/arm/mach-realview/platsmp.c53
-rw-r--r--arch/arm/mach-realview/realview_eb.c1
-rw-r--r--arch/arm/mach-realview/realview_pb1176.c23
-rw-r--r--arch/arm/mach-realview/realview_pb11mp.c1
-rw-r--r--arch/arm/mach-realview/realview_pbx.c335
-rw-r--r--arch/arm/mach-s3c2400/gpio.c6
-rw-r--r--arch/arm/mach-s3c2410/Kconfig8
-rw-r--r--arch/arm/mach-s3c2410/dma.c4
-rw-r--r--arch/arm/mach-s3c2410/gpio.c6
-rw-r--r--arch/arm/mach-s3c2410/h1940-bluetooth.c26
-rw-r--r--arch/arm/mach-s3c2410/include/mach/dma.h265
-rw-r--r--arch/arm/mach-s3c2410/include/mach/gpio-core.h2
-rw-r--r--arch/arm/mach-s3c2410/include/mach/gpio-fns.h103
-rw-r--r--arch/arm/mach-s3c2410/include/mach/gpio-nrs.h70
-rw-r--r--arch/arm/mach-s3c2410/include/mach/gpio.h1
-rw-r--r--arch/arm/mach-s3c2410/include/mach/hardware.h95
-rw-r--r--arch/arm/mach-s3c2410/include/mach/map.h2
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-gpio.h333
-rw-r--r--arch/arm/mach-s3c2410/include/mach/system-reset.h36
-rw-r--r--arch/arm/mach-s3c2410/mach-amlm5900.c5
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c10
-rw-r--r--arch/arm/mach-s3c2410/mach-h1940.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-n30.c51
-rw-r--r--arch/arm/mach-s3c2410/mach-qt2410.c19
-rw-r--r--arch/arm/mach-s3c2410/mach-vr1000.c11
-rw-r--r--arch/arm/mach-s3c2410/pm.c5
-rw-r--r--arch/arm/mach-s3c2410/usb-simtec.c32
-rw-r--r--arch/arm/mach-s3c2412/Kconfig3
-rw-r--r--arch/arm/mach-s3c2412/dma.c3
-rw-r--r--arch/arm/mach-s3c2412/mach-jive.c43
-rw-r--r--arch/arm/mach-s3c2412/mach-smdk2413.c9
-rw-r--r--arch/arm/mach-s3c2440/Kconfig5
-rw-r--r--arch/arm/mach-s3c2440/dma.c4
-rw-r--r--arch/arm/mach-s3c2440/mach-anubis.c3
-rw-r--r--arch/arm/mach-s3c2440/mach-at2440evb.c2
-rw-r--r--arch/arm/mach-s3c2440/mach-nexcoder.c17
-rw-r--r--arch/arm/mach-s3c2440/mach-osiris.c9
-rw-r--r--arch/arm/mach-s3c2443/dma.c3
-rw-r--r--arch/arm/mach-s3c6400/Kconfig25
-rw-r--r--arch/arm/mach-s3c6400/Makefile10
-rw-r--r--arch/arm/mach-s3c6400/include/mach/dma.h59
-rw-r--r--arch/arm/mach-s3c6400/include/mach/map.h6
-rw-r--r--arch/arm/mach-s3c6400/include/mach/regs-clock.h16
-rw-r--r--arch/arm/mach-s3c6400/include/mach/system.h8
-rw-r--r--arch/arm/mach-s3c6400/mach-smdk6400.c96
-rw-r--r--arch/arm/mach-s3c6400/s3c6400.c89
-rw-r--r--arch/arm/mach-s3c6400/setup-sdhci.c63
-rw-r--r--arch/arm/mach-s3c6410/Kconfig37
-rw-r--r--arch/arm/mach-s3c6410/Makefile4
-rw-r--r--arch/arm/mach-s3c6410/cpu.c3
-rw-r--r--arch/arm/mach-s3c6410/mach-anw6410.c245
-rw-r--r--arch/arm/mach-s3c6410/mach-ncp.c107
-rw-r--r--arch/arm/mach-s3c6410/mach-smdk6410.c198
-rw-r--r--arch/arm/mach-s3c6410/setup-sdhci.c34
-rw-r--r--arch/arm/mach-sa1100/collie_pm.c296
-rw-r--r--arch/arm/mach-stmp378x/Makefile2
-rw-r--r--arch/arm/mach-stmp378x/Makefile.boot3
-rw-r--r--arch/arm/mach-stmp378x/include/mach/entry-macro.S35
-rw-r--r--arch/arm/mach-stmp378x/include/mach/irqs.h95
-rw-r--r--arch/arm/mach-stmp378x/include/mach/pins.h151
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-apbh.h101
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-apbx.h119
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-audioin.h63
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-audioout.h104
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-bch.h56
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h88
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-dcp.h87
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-digctl.h38
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-dram.h27
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-dri.h45
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-ecc8.h39
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-emi.h25
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-gpmi.h78
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-i2c.h55
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-icoll.h45
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-ir.h (renamed from arch/arm/mach-imx/include/mach/memory.h)17
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-lcdif.h195
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-lradc.h99
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-ocotp.h40
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h90
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-power.h63
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-pwm.h53
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-pxp.h140
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-rtc.h59
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-saif.h (renamed from arch/arm/mach-imx/include/mach/vmalloc.h)9
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-spdif.h49
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-ssp.h102
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-sydma.h23
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-timrot.h68
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-tvenc.h67
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-uartapp.h87
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h268
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h40
-rw-r--r--arch/arm/mach-stmp378x/include/mach/regs-usbphy.h37
-rw-r--r--arch/arm/mach-stmp378x/stmp378x.c299
-rw-r--r--arch/arm/mach-stmp378x/stmp378x.h25
-rw-r--r--arch/arm/mach-stmp378x/stmp378x_devb.c334
-rw-r--r--arch/arm/mach-stmp37xx/Makefile2
-rw-r--r--arch/arm/mach-stmp37xx/Makefile.boot3
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/entry-macro.S37
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/irqs.h99
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/pins.h147
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-apbh.h97
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-apbx.h113
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-audioin.h61
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-audioout.h111
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h72
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-digctl.h24
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h37
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h63
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-i2c.h55
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-icoll.h43
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h89
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-lradc.h97
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h88
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-power.h56
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-pwm.h51
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-rtc.h57
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-ssp.h101
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-timrot.h49
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h85
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h268
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h (renamed from arch/arm/mach-imx/include/mach/io.h)18
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h (renamed from arch/arm/mach-imx/include/mach/timex.h)16
-rw-r--r--arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h37
-rw-r--r--arch/arm/mach-stmp37xx/stmp37xx.c219
-rw-r--r--arch/arm/mach-stmp37xx/stmp37xx.h24
-rw-r--r--arch/arm/mach-stmp37xx/stmp37xx_devb.c101
-rw-r--r--arch/arm/mach-u300/Kconfig105
-rw-r--r--arch/arm/mach-u300/Makefile11
-rw-r--r--arch/arm/mach-u300/Makefile.boot15
-rw-r--r--arch/arm/mach-u300/clock.c1487
-rw-r--r--arch/arm/mach-u300/clock.h53
-rw-r--r--arch/arm/mach-u300/core.c649
-rw-r--r--arch/arm/mach-u300/gpio.c703
-rw-r--r--arch/arm/mach-u300/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-u300/include/mach/debug-macro.S22
-rw-r--r--arch/arm/mach-u300/include/mach/entry-macro.S40
-rw-r--r--arch/arm/mach-u300/include/mach/gpio.h290
-rw-r--r--arch/arm/mach-u300/include/mach/hardware.h5
-rw-r--r--arch/arm/mach-u300/include/mach/io.h20
-rw-r--r--arch/arm/mach-u300/include/mach/irqs.h114
-rw-r--r--arch/arm/mach-u300/include/mach/memory.h42
-rw-r--r--arch/arm/mach-u300/include/mach/platform.h19
-rw-r--r--arch/arm/mach-u300/include/mach/syscon.h644
-rw-r--r--arch/arm/mach-u300/include/mach/system.h42
-rw-r--r--arch/arm/mach-u300/include/mach/timex.h17
-rw-r--r--arch/arm/mach-u300/include/mach/u300-regs.h187
-rw-r--r--arch/arm/mach-u300/include/mach/uncompress.h (renamed from arch/arm/mach-imx/include/mach/system.h)38
-rw-r--r--arch/arm/mach-u300/include/mach/vmalloc.h12
-rw-r--r--arch/arm/mach-u300/mmc.c216
-rw-r--r--arch/arm/mach-u300/mmc.h18
-rw-r--r--arch/arm/mach-u300/padmux.c58
-rw-r--r--arch/arm/mach-u300/padmux.h19
-rw-r--r--arch/arm/mach-u300/timer.c422
-rw-r--r--arch/arm/mach-u300/u300.c55
-rw-r--r--arch/arm/mach-versatile/core.c2
-rw-r--r--arch/arm/mach-w90x900/Makefile2
-rw-r--r--arch/arm/mach-w90x900/clock.c77
-rw-r--r--arch/arm/mach-w90x900/clock.h36
-rw-r--r--arch/arm/mach-w90x900/cpu.h2
-rw-r--r--arch/arm/mach-w90x900/gpio.c154
-rw-r--r--arch/arm/mach-w90x900/include/mach/clkdev.h7
-rw-r--r--arch/arm/mach-w90x900/include/mach/gpio.h34
-rw-r--r--arch/arm/mach-w90x900/include/mach/irqs.h49
-rw-r--r--arch/arm/mach-w90x900/include/mach/map.h101
-rw-r--r--arch/arm/mach-w90x900/include/mach/regs-clock.h31
-rw-r--r--arch/arm/mach-w90x900/include/mach/regs-usb.h35
-rw-r--r--arch/arm/mach-w90x900/mach-w90p910evb.c164
-rw-r--r--arch/arm/mach-w90x900/mfp-w90p910.c116
-rw-r--r--arch/arm/mach-w90x900/w90p910.c53
-rw-r--r--arch/arm/mm/Kconfig23
-rw-r--r--arch/arm/mm/abort-ev6.S3
-rw-r--r--arch/arm/mm/ioremap.c6
-rw-r--r--arch/arm/mm/mmu.c15
-rw-r--r--arch/arm/mm/proc-v6.S3
-rw-r--r--arch/arm/mm/proc-v7.S59
-rw-r--r--arch/arm/mm/tlb-v7.S17
-rw-r--r--arch/arm/oprofile/op_model_mpcore.c1
-rw-r--r--arch/arm/plat-mxc/Kconfig7
-rw-r--r--arch/arm/plat-mxc/Makefile1
-rw-r--r--arch/arm/plat-mxc/gpio.c49
-rw-r--r--arch/arm/plat-mxc/include/mach/board-armadillo5x0.h22
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx21ads.h58
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx27lite.h19
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx27pdk.h19
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx31ads.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx31lilly.h46
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx31lite.h22
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx31moboard.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx31pdk.h47
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx35pdk.h27
-rw-r--r--arch/arm/plat-mxc/include/mach/board-pcm037.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/board-pcm038.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/board-pcm043.h27
-rw-r--r--arch/arm/plat-mxc/include/mach/board-qong.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/common.h6
-rw-r--r--arch/arm/plat-mxc/include/mach/debug-macro.S18
-rw-r--r--arch/arm/plat-mxc/include/mach/gpio.h1
-rw-r--r--arch/arm/plat-mxc/include/mach/imx-uart.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/imxfb.h4
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-mx3.h36
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-mx35.h1267
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-v3.h121
-rw-r--r--arch/arm/plat-mxc/include/mach/memory.h8
-rw-r--r--arch/arm/plat-mxc/include/mach/mx1.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/mx3x.h6
-rw-r--r--arch/arm/plat-mxc/include/mach/mxc_timer.h158
-rw-r--r--arch/arm/plat-mxc/include/mach/usb.h2
-rw-r--r--arch/arm/plat-mxc/iomux-v3.c98
-rw-r--r--arch/arm/plat-mxc/irq.c79
-rw-r--r--arch/arm/plat-mxc/pwm.c144
-rw-r--r--arch/arm/plat-mxc/time.c155
-rw-r--r--arch/arm/plat-omap/Kconfig19
-rw-r--r--arch/arm/plat-omap/Makefile1
-rw-r--r--arch/arm/plat-omap/clock.c37
-rw-r--r--arch/arm/plat-omap/common.c114
-rw-r--r--arch/arm/plat-omap/devices.c2
-rw-r--r--arch/arm/plat-omap/dma.c102
-rw-r--r--arch/arm/plat-omap/dmtimer.c73
-rw-r--r--arch/arm/plat-omap/gpio.c134
-rw-r--r--arch/arm/plat-omap/i2c.c2
-rw-r--r--arch/arm/plat-omap/include/mach/clock.h10
-rw-r--r--arch/arm/plat-omap/include/mach/common.h3
-rw-r--r--arch/arm/plat-omap/include/mach/control.h20
-rw-r--r--arch/arm/plat-omap/include/mach/cpu.h21
-rw-r--r--arch/arm/plat-omap/include/mach/debug-macro.S2
-rw-r--r--arch/arm/plat-omap/include/mach/dma.h4
-rw-r--r--arch/arm/plat-omap/include/mach/entry-macro.S83
-rw-r--r--arch/arm/plat-omap/include/mach/gpmc-smc91x.h42
-rw-r--r--arch/arm/plat-omap/include/mach/hardware.h1
-rw-r--r--arch/arm/plat-omap/include/mach/hwa742.h4
-rw-r--r--arch/arm/plat-omap/include/mach/io.h37
-rw-r--r--arch/arm/plat-omap/include/mach/iommu.h168
-rw-r--r--arch/arm/plat-omap/include/mach/iommu2.h96
-rw-r--r--arch/arm/plat-omap/include/mach/iovmm.h94
-rw-r--r--arch/arm/plat-omap/include/mach/irqs.h92
-rw-r--r--arch/arm/plat-omap/include/mach/keypad.h4
-rw-r--r--arch/arm/plat-omap/include/mach/memory.h3
-rw-r--r--arch/arm/plat-omap/include/mach/omap24xx.h18
-rw-r--r--arch/arm/plat-omap/include/mach/omap34xx.h13
-rw-r--r--arch/arm/plat-omap/include/mach/omap44xx.h46
-rw-r--r--arch/arm/plat-omap/include/mach/onenand.h22
-rw-r--r--arch/arm/plat-omap/include/mach/serial.h25
-rw-r--r--arch/arm/plat-omap/include/mach/smp.h51
-rw-r--r--arch/arm/plat-omap/include/mach/sram.h6
-rw-r--r--arch/arm/plat-omap/include/mach/usb.h6
-rw-r--r--arch/arm/plat-omap/include/mach/vmalloc.h2
-rw-r--r--arch/arm/plat-omap/io.c29
-rw-r--r--arch/arm/plat-omap/iommu.c996
-rw-r--r--arch/arm/plat-omap/iopgtable.h72
-rw-r--r--arch/arm/plat-omap/iovmm.c896
-rw-r--r--arch/arm/plat-omap/mcbsp.c30
-rw-r--r--arch/arm/plat-omap/mux.c3
-rw-r--r--arch/arm/plat-omap/sram.c66
-rw-r--r--arch/arm/plat-orion/gpio.c194
-rw-r--r--arch/arm/plat-orion/include/plat/gpio.h17
-rw-r--r--arch/arm/plat-orion/include/plat/orion_wdt.h (renamed from arch/arm/plat-orion/include/plat/orion5x_wdt.h)8
-rw-r--r--arch/arm/plat-orion/time.c59
-rw-r--r--arch/arm/plat-pxa/Makefile2
-rw-r--r--arch/arm/plat-pxa/include/plat/i2c.h (renamed from arch/arm/mach-pxa/include/mach/i2c.h)0
-rw-r--r--arch/arm/plat-pxa/pwm.c (renamed from arch/arm/mach-pxa/pwm.c)119
-rw-r--r--arch/arm/plat-s3c/Kconfig26
-rw-r--r--arch/arm/plat-s3c/Makefile7
-rw-r--r--arch/arm/plat-s3c/dev-usb-hsotg.c41
-rw-r--r--arch/arm/plat-s3c/dev-usb.c50
-rw-r--r--arch/arm/plat-s3c/dma.c86
-rw-r--r--arch/arm/plat-s3c/gpio.c11
-rw-r--r--arch/arm/plat-s3c/include/plat/adc.h10
-rw-r--r--arch/arm/plat-s3c/include/plat/clock.h1
-rw-r--r--arch/arm/plat-s3c/include/plat/cpu.h3
-rw-r--r--arch/arm/plat-s3c/include/plat/devs.h1
-rw-r--r--arch/arm/plat-s3c/include/plat/dma-core.h22
-rw-r--r--arch/arm/plat-s3c/include/plat/dma.h127
-rw-r--r--arch/arm/plat-s3c/include/plat/gpio-core.h30
-rw-r--r--arch/arm/plat-s3c/include/plat/pm.h15
-rw-r--r--arch/arm/plat-s3c/include/plat/regs-serial.h5
-rw-r--r--arch/arm/plat-s3c/include/plat/sdhci.h50
-rw-r--r--arch/arm/plat-s3c/include/plat/udc-hs.h29
-rw-r--r--arch/arm/plat-s3c/include/plat/watchdog-reset.h49
-rw-r--r--arch/arm/plat-s3c/pm-gpio.c380
-rw-r--r--arch/arm/plat-s3c/pm.c19
-rw-r--r--arch/arm/plat-s3c24xx/Kconfig1
-rw-r--r--arch/arm/plat-s3c24xx/adc.c11
-rw-r--r--arch/arm/plat-s3c24xx/common-smdk.c25
-rw-r--r--arch/arm/plat-s3c24xx/devs.c30
-rw-r--r--arch/arm/plat-s3c24xx/dma.c151
-rw-r--r--arch/arm/plat-s3c24xx/gpio.c34
-rw-r--r--arch/arm/plat-s3c24xx/gpiolib.c50
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/dma-plat.h (renamed from arch/arm/plat-s3c24xx/include/plat/dma.h)12
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/map.h1
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/pm-core.h5
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/regs-dma.h145
-rw-r--r--arch/arm/plat-s3c24xx/pm.c222
-rw-r--r--arch/arm/plat-s3c24xx/setup-i2c.c5
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c20
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c20
-rw-r--r--arch/arm/plat-s3c64xx/Kconfig10
-rw-r--r--arch/arm/plat-s3c64xx/Makefile11
-rw-r--r--arch/arm/plat-s3c64xx/clock.c19
-rw-r--r--arch/arm/plat-s3c64xx/cpu.c32
-rw-r--r--arch/arm/plat-s3c64xx/dma.c722
-rw-r--r--arch/arm/plat-s3c64xx/gpiolib.c10
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/dma-plat.h70
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/irqs.h1
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/pm-core.h98
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/regs-clock.h1
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/s3c6400.h3
-rw-r--r--arch/arm/plat-s3c64xx/irq-eint.c3
-rw-r--r--arch/arm/plat-s3c64xx/irq-pm.c111
-rw-r--r--arch/arm/plat-s3c64xx/irq.c9
-rw-r--r--arch/arm/plat-s3c64xx/pm.c175
-rw-r--r--arch/arm/plat-s3c64xx/s3c6400-clock.c106
-rw-r--r--arch/arm/plat-s3c64xx/setup-sdhci-gpio.c55
-rw-r--r--arch/arm/plat-s3c64xx/sleep.S144
-rw-r--r--arch/arm/plat-stmp3xxx/Kconfig37
-rw-r--r--arch/arm/plat-stmp3xxx/Makefile5
-rw-r--r--arch/arm/plat-stmp3xxx/clock.c1135
-rw-r--r--arch/arm/plat-stmp3xxx/clock.h61
-rw-r--r--arch/arm/plat-stmp3xxx/core.c128
-rw-r--r--arch/arm/plat-stmp3xxx/devices.c389
-rw-r--r--arch/arm/plat-stmp3xxx/dma.c463
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/clkdev.h18
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/cputype.h33
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/debug-macro.S42
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/dma.h153
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/gpio.h28
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/gpmi.h12
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/hardware.h32
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/io.h25
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/memory.h22
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/mmc.h14
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/pinmux.h157
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/pins.h30
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/platform.h68
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h54
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/system.h49
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/timex.h20
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/uncompress.h53
-rw-r--r--arch/arm/plat-stmp3xxx/include/mach/vmalloc.h12
-rw-r--r--arch/arm/plat-stmp3xxx/irq.c51
-rw-r--r--arch/arm/plat-stmp3xxx/pinmux.c552
-rw-r--r--arch/arm/plat-stmp3xxx/timer.c189
-rw-r--r--arch/arm/vfp/vfphw.S4
-rw-r--r--arch/arm/vfp/vfpmodule.c2
-rw-r--r--drivers/ata/Kconfig9
-rw-r--r--drivers/ata/Makefile1
-rw-r--r--drivers/ata/pata_palmld.c150
-rw-r--r--drivers/char/hw_random/Kconfig12
-rw-r--r--drivers/char/hw_random/Makefile1
-rw-r--r--drivers/char/hw_random/mxc-rnga.c247
-rw-r--r--drivers/i2c/busses/i2c-pxa.c22
-rw-r--r--drivers/input/serio/ambakmi.c2
-rw-r--r--drivers/leds/leds-h1940.c2
-rw-r--r--drivers/leds/leds-s3c24xx.c1
-rw-r--r--drivers/media/video/Kconfig4
-rw-r--r--drivers/mmc/host/Kconfig2
-rw-r--r--drivers/mmc/host/mmci.c2
-rw-r--r--drivers/mmc/host/omap_hsmmc.c6
-rw-r--r--drivers/mmc/host/s3cmci.c5
-rw-r--r--drivers/mtd/onenand/omap2.c1
-rw-r--r--drivers/net/arm/ixp4xx_eth.c26
-rw-r--r--drivers/net/smc91x.h5
-rw-r--r--drivers/net/wan/ixp4xx_hss.c11
-rw-r--r--drivers/pcmcia/Kconfig2
-rw-r--r--drivers/pcmcia/Makefile1
-rw-r--r--drivers/pcmcia/pxa2xx_stargate2.c174
-rw-r--r--drivers/rtc/rtc-ep93xx.c149
-rw-r--r--drivers/rtc/rtc-pl030.c2
-rw-r--r--drivers/rtc/rtc-pl031.c3
-rw-r--r--drivers/serial/amba-pl010.c2
-rw-r--r--drivers/serial/amba-pl011.c38
-rw-r--r--drivers/serial/imx.c13
-rw-r--r--drivers/spi/Kconfig11
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/amba-pl022.c1866
-rw-r--r--drivers/spi/spi_s3c24xx_gpio.c1
-rw-r--r--drivers/usb/host/ohci-ep93xx.c13
-rw-r--r--drivers/video/Kconfig12
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/amba-clcd.c2
-rw-r--r--drivers/video/mx3fb.c4
-rw-r--r--drivers/video/omap/hwa742.c26
-rw-r--r--drivers/video/pxa168fb.c803
-rw-r--r--drivers/video/pxa168fb.h558
-rw-r--r--drivers/watchdog/Kconfig10
-rw-r--r--drivers/watchdog/Makefile2
-rw-r--r--drivers/watchdog/orion_wdt.c (renamed from drivers/watchdog/orion5x_wdt.c)120
-rw-r--r--include/linux/amba/pl022.h264
-rw-r--r--include/linux/amba/serial.h3
-rw-r--r--include/linux/clk.h13
-rw-r--r--include/video/pxa168fb.h127
-rw-r--r--sound/arm/aaci.c2
-rw-r--r--sound/soc/pxa/Kconfig7
-rw-r--r--sound/soc/pxa/palm27x.c2
-rw-r--r--sound/soc/s3c24xx/s3c2412-i2s.c1
-rw-r--r--sound/soc/s3c24xx/s3c2443-ac97.c1
-rw-r--r--sound/soc/s3c24xx/s3c24xx-i2s.c2
-rw-r--r--sound/soc/s3c24xx/s3c24xx-pcm.c21
748 files changed, 59708 insertions, 11557 deletions
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index ea7ccfc..948c871 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -51,7 +51,7 @@ PIN Numbers
-----------
Each pin has an unique number associated with it in regs-gpio.h,
- eg S3C2410_GPA0 or S3C2410_GPF1. These defines are used to tell
+ eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
the GPIO functions which pin is to be used.
@@ -65,11 +65,11 @@ Configuring a pin
Eg:
- s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
- s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+ s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
- which would turn GPA0 into the lowest Address line A0, and set
- GPE8 to be connected to the SDIO/MMC controller's SDDAT1 line.
+ which would turn GPA(0) into the lowest Address line A0, and set
+ GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
Reading the current configuration
diff --git a/MAINTAINERS b/MAINTAINERS
index 90f8128..0765bb6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -681,6 +681,13 @@ M: sakoman@gmail.com
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+ARM/H4700 (HP IPAQ HX4700) MACHINE SUPPORT
+P: Philipp Zabel
+M: philipp.zabel@gmail.com
+S: Maintained
+F: arch/arm/mach-pxa/hx4700.c
+F: arch/arm/mach-pxa/include/mach/hx4700.h
+
ARM/HP JORNADA 7XX MACHINE SUPPORT
P: Kristoffer Ericson
M: kristoffer.ericson@gmail.com
@@ -4159,6 +4166,69 @@ S: Maintained
F: drivers/video/riva/
F: drivers/video/nvidia/
+OMAP SUPPORT
+P: Tony Lindgren <tony@atomide.com>
+M: tony@atomide.com
+L: linux-omap@vger.kernel.org
+W: http://www.muru.com/linux/omap/
+W: http://linux.omap.com/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+S: Maintained
+F: arch/arm/*omap*
+
+OMAP CLOCK FRAMEWORK SUPPORT
+P: Paul Walmsley
+M: paul@pwsan.com
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: arch/arm/*omap*/*clock*
+
+OMAP POWER MANAGEMENT SUPPORT
+P: Kevin Hilman
+M: khilman@deeprootsystems.com
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: arch/arm/*omap*/*pm*
+
+OMAP AUDIO SUPPORT
+P: Jarkko Nikula
+M: jhnikula@gmail.com
+L: alsa-devel@alsa-project.org (subscribers-only)
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: sound/soc/omap/
+
+OMAP FRAMEBUFFER SUPPORT
+P: Imre Deak
+M: imre.deak@nokia.com
+L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: drivers/video/omap/
+
+OMAP MMC SUPPORT
+P: Jarkko Lavinen
+M: jarkko.lavinen@nokia.com
+L: linux-kernel@vger.kernel.org
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: drivers/mmc/host/*omap*
+
+OMAP RANDOM NUMBER GENERATOR SUPPORT
+P: Deepak Saxena
+M: dsaxena@plexity.net
+S: Maintained
+F: drivers/char/hw_random/omap-rng.c
+
+OMAP USB SUPPORT
+P: Felipe Balbi
+M: felipe.balbi@nokia.com
+P: David Brownell
+M: dbrownell@users.sourceforge.net
+L: linux-usb@vger.kernel.org
+L: linux-omap@vger.kernel.org
+S: Maintained
+
OMFS FILESYSTEM
P: Bob Copeland
M: me@bobcopeland.com
@@ -4597,7 +4667,7 @@ F: drivers/media/video/pvrusb2/
PXA2xx/PXA3xx SUPPORT
P: Eric Miao
-M: eric.miao@marvell.com
+M: eric.y.miao@gmail.com
P: Russell King
M: linux@arm.linux.org.uk
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
@@ -4612,19 +4682,19 @@ F: sound/soc/pxa
PXA168 SUPPORT
P: Eric Miao
-M: eric.miao@marvell.com
+M: eric.y.miao@gmail.com
P: Jason Chagas
M: jason.chagas@marvell.com
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
-S: Supported
+S: Maintained
PXA910 SUPPORT
P: Eric Miao
-M: eric.miao@marvell.com
+M: eric.y.miao@gmail.com
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
-S: Supported
+S: Maintained
PXA MMCI DRIVER
S: Orphan
@@ -5145,7 +5215,6 @@ P: Vincent Sanders
M: support@simtec.co.uk
W: http://www.simtec.co.uk/products/EB110ATX/
S: Supported
-F: arch/arm/mach-ebsa110/
SIMTEC EB2410ITX (BAST)
P: Ben Dooks
@@ -5559,20 +5628,6 @@ F: drivers/misc/tifm*
F: drivers/mmc/host/tifm_sd.c
F: include/linux/tifm.h
-TI OMAP MMC INTERFACE DRIVER
-P: Carlos Aguiar, Anderson Briglia and Syed Khasim
-M: linux-omap@vger.kernel.org
-W: http://linux.omap.com
-W: http://www.muru.com/linux/omap/
-S: Maintained
-F: drivers/mmc/host/omap.c
-
-TI OMAP RANDOM NUMBER GENERATOR SUPPORT
-P: Deepak Saxena
-M: dsaxena@plexity.net
-S: Maintained
-F: drivers/char/hw_random/omap-rng.c
-
TIPC NETWORK LAYER
P: Per Liden
M: per.liden@ericsson.com
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9d02cdb..2947510 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -34,15 +34,12 @@ config SYS_SUPPORTS_APM_EMULATION
config GENERIC_GPIO
bool
- default n
config GENERIC_TIME
bool
- default n
config GENERIC_CLOCKEVENTS
bool
- default n
config GENERIC_CLOCKEVENTS_BROADCAST
bool
@@ -55,7 +52,6 @@ config MMU
config NO_IOPORT
bool
- default n
config EISA
bool
@@ -126,11 +122,9 @@ config RWSEM_XCHGADD_ALGORITHM
config ARCH_HAS_ILOG2_U32
bool
- default n
config ARCH_HAS_ILOG2_U64
bool
- default n
config GENERIC_HWEIGHT
bool
@@ -253,6 +247,14 @@ config ARCH_CLPS711X
help
Support for Cirrus Logic 711x/721x based boards.
+config ARCH_GEMINI
+ bool "Cortina Systems Gemini"
+ select CPU_FA526
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for the Cortina Systems Gemini family SoCs
+
config ARCH_EBSA110
bool "EBSA-110"
select CPU_SA110
@@ -277,14 +279,6 @@ config ARCH_EP93XX
help
This enables support for the Cirrus EP93xx series of CPUs.
-config ARCH_GEMINI
- bool "Cortina Systems Gemini"
- select CPU_FA526
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- help
- Support for the Cortina Systems Gemini family SoCs
-
config ARCH_FOOTBRIDGE
bool "FootBridge"
select CPU_SA110
@@ -293,6 +287,30 @@ config ARCH_FOOTBRIDGE
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
+config ARCH_MXC
+ bool "Freescale MXC/iMX-based"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select ARCH_MTD_XIP
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
+ help
+ Support for Freescale MXC/iMX-based family of processors
+
+config ARCH_STMP3XXX
+ bool "Freescale STMP3xxx"
+ select CPU_ARM926T
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select ARCH_REQUIRE_GPIOLIB
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select USB_ARCH_HAS_EHCI
+ help
+ Support for systems based on the Freescale 3xxx CPUs.
+
config ARCH_NETX
bool "Hilscher NetX based"
select CPU_ARM926T
@@ -309,15 +327,6 @@ config ARCH_H720X
help
This enables support for systems based on the Hynix HMS720x
-config ARCH_IMX
- bool "IMX"
- select CPU_ARM920T
- select GENERIC_GPIO
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- help
- Support for Motorola's i.MX family of processors (MX1, MXL).
-
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
@@ -398,6 +407,7 @@ config ARCH_KIRKWOOD
select CPU_FEROCEON
select PCI
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
@@ -405,28 +415,6 @@ config ARCH_KIRKWOOD
Support for the following Marvell Kirkwood series SoCs:
88F6180, 88F6192 and 88F6281.
-config ARCH_KS8695
- bool "Micrel/Kendin KS8695"
- select CPU_ARM922T
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- help
- Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
- System-on-Chip devices.
-
-config ARCH_NS9XXX
- bool "NetSilicon NS9xxx"
- select CPU_ARM926T
- select GENERIC_GPIO
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK
- help
- Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
- System.
-
- <http://www.digi.com/products/microprocessors/index.jsp>
-
config ARCH_LOKI
bool "Marvell Loki (88RC8480)"
select CPU_FEROCEON
@@ -441,6 +429,7 @@ config ARCH_MV78XX0
select CPU_FEROCEON
select PCI
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
@@ -448,23 +437,13 @@ config ARCH_MV78XX0
Support for the following Marvell MV78xx0 series SoCs:
MV781x0, MV782x0.
-config ARCH_MXC
- bool "Freescale MXC/iMX-based"
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- select ARCH_MTD_XIP
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
- help
- Support for Freescale MXC/iMX-based family of processors
-
config ARCH_ORION5X
bool "Marvell Orion"
depends on MMU
select CPU_FEROCEON
select PCI
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
@@ -473,6 +452,52 @@ config ARCH_ORION5X
Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
Orion-2 (5281), Orion-1-90 (6183).
+config ARCH_MMP
+ bool "Marvell PXA168/910"
+ depends on MMU
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select TICK_ONESHOT
+ select PLAT_PXA
+ help
+ Support for Marvell's PXA168/910 processor line.
+
+config ARCH_KS8695
+ bool "Micrel/Kendin KS8695"
+ select CPU_ARM922T
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
+ System-on-Chip devices.
+
+config ARCH_NS9XXX
+ bool "NetSilicon NS9xxx"
+ select CPU_ARM926T
+ select GENERIC_GPIO
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ help
+ Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
+ System.
+
+ <http://www.digi.com/products/microprocessors/index.jsp>
+
+config ARCH_W90X900
+ bool "Nuvoton W90X900 CPU"
+ select CPU_ARM926T
+ select ARCH_REQUIRE_GPIOLIB
+ select GENERIC_GPIO
+ select COMMON_CLKDEV
+ help
+ Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
+ can login www.mcuos.com or www.nuvoton.com to know more.
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
@@ -495,19 +520,16 @@ config ARCH_PXA
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-config ARCH_MMP
- bool "Marvell PXA168/910"
- depends on MMU
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
- select COMMON_CLKDEV
+config ARCH_MSM
+ bool "Qualcomm MSM"
+ select CPU_V6
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select TICK_ONESHOT
- select PLAT_PXA
help
- Support for Marvell's PXA168/910 processor line.
+ Support for Qualcomm MSM7K based systems. This runs on the ARM11
+ apps processor of the MSM7K and depends on a shared memory
+ interface to the ARM9 modem processor which runs the baseband stack
+ and controls some vital subsystems (clock and power control, etc).
config ARCH_RPC
bool "RiscPC"
@@ -576,6 +598,20 @@ config ARCH_LH7A40X
core with a wide array of integrated devices for
hand-held and low-power applications.
+config ARCH_U300
+ bool "ST-Ericsson U300 Series"
+ depends on MMU
+ select CPU_ARM926T
+ select ARM_AMBA
+ select ARM_VIC
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_GPIO
+ help
+ Support for ST-Ericsson U300 series mobile platforms.
+
config ARCH_DAVINCI
bool "TI DaVinci"
select CPU_ARM926T
@@ -587,6 +623,7 @@ config ARCH_DAVINCI
select ZONE_DMA
select HAVE_IDE
select COMMON_CLKDEV
+ select GENERIC_ALLOCATOR
help
Support for TI's DaVinci platform.
@@ -600,24 +637,6 @@ config ARCH_OMAP
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
-config ARCH_MSM
- bool "Qualcomm MSM"
- select CPU_V6
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- help
- Support for Qualcomm MSM7K based systems. This runs on the ARM11
- apps processor of the MSM7K and depends on a shared memory
- interface to the ARM9 modem processor which runs the baseband stack
- and controls some vital subsystems (clock and power control, etc).
-
-config ARCH_W90X900
- bool "Nuvoton W90X900 CPU"
- select CPU_ARM926T
- help
- Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
- can login www.mcuos.com or www.nuvoton.com to know more.
-
endchoice
source "arch/arm/mach-clps711x/Kconfig"
@@ -681,9 +700,9 @@ source "arch/arm/mach-s3c6400/Kconfig"
source "arch/arm/mach-s3c6410/Kconfig"
endif
-source "arch/arm/mach-lh7a40x/Kconfig"
+source "arch/arm/plat-stmp3xxx/Kconfig"
-source "arch/arm/mach-imx/Kconfig"
+source "arch/arm/mach-lh7a40x/Kconfig"
source "arch/arm/mach-h720x/Kconfig"
@@ -707,6 +726,8 @@ source "arch/arm/mach-ks8695/Kconfig"
source "arch/arm/mach-msm/Kconfig"
+source "arch/arm/mach-u300/Kconfig"
+
source "arch/arm/mach-w90x900/Kconfig"
# Definitions to make life easier
@@ -859,8 +880,11 @@ source "kernel/time/Kconfig"
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
- depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+ depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
+ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+ depends on GENERIC_CLOCKEVENTS
select USE_GENERIC_SMP_HELPERS
+ select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@@ -878,6 +902,18 @@ config SMP
If you don't know what to do here, say N.
+config HAVE_ARM_SCU
+ bool
+ depends on SMP
+ help
+ This option enables support for the ARM system coherency unit
+
+config HAVE_ARM_TWD
+ bool
+ depends on SMP
+ help
+ This options enables support for the ARM timer and watchdog unit
+
choice
prompt "Memory split"
default VMSPLIT_3G
@@ -916,8 +952,10 @@ config HOTPLUG_CPU
config LOCAL_TIMERS
bool "Use local timer interrupts"
- depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP)
+ depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
+ REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
default y
+ select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
@@ -979,7 +1017,6 @@ config OABI_COMPAT
config ARCH_HAS_HOLES_MEMORYMODEL
bool
- default n
# Discontigmem is deprecated
config ARCH_DISCONTIGMEM_ENABLE
@@ -1022,12 +1059,12 @@ source "mm/Kconfig"
config LEDS
bool "Timer and CPU usage LEDs"
depends on ARCH_CDB89712 || ARCH_EBSA110 || \
- ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+ ARCH_EBSA285 || ARCH_INTEGRATOR || \
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
ARCH_AT91 || ARCH_DAVINCI || \
- ARCH_KS8695 || MACH_RD88F5182
+ ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
@@ -1085,6 +1122,22 @@ config ALIGNMENT_TRAP
correct operation of some network protocols. With an IP-only
configuration it is safe to say N, otherwise say Y.
+config UACCESS_WITH_MEMCPY
+ bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)"
+ depends on MMU && EXPERIMENTAL
+ default y if CPU_FEROCEON
+ help
+ Implement faster copy_to_user and clear_user methods for CPU
+ cores where a 8-word STM instruction give significantly higher
+ memory write throughput than a sequence of individual 32bit stores.
+
+ A possible side effect is a slight increase in scheduling latency
+ between threads sharing the same address space if they invoke
+ such copy operations with large buffers.
+
+ However, if the CPU data cache is using a write-allocate mode,
+ this option is unlikely to provide any performance gain.
+
endmenu
menu "Boot options"
@@ -1188,7 +1241,7 @@ endmenu
menu "CPU Power Management"
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA)
source "drivers/cpufreq/Kconfig"
@@ -1213,14 +1266,11 @@ config CPU_FREQ_INTEGRATOR
If in doubt, say Y.
-config CPU_FREQ_IMX
- tristate "CPUfreq driver for i.MX CPUs"
- depends on ARCH_IMX && CPU_FREQ
- default n
- help
- This enables the CPUfreq driver for i.MX CPUs.
-
- If in doubt, say N.
+config CPU_FREQ_PXA
+ bool
+ depends on CPU_FREQ && ARCH_PXA && PXA25x
+ default y
+ select CPU_FREQ_DEFAULT_GOV_USERSPACE
endif
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e84729b..c877d6d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -11,6 +11,9 @@
# Copyright (C) 1995-2001 by Russell King
LDFLAGS_vmlinux :=-p --no-undefined -X
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux += --be8
+endif
CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
GZFLAGS :=-9
@@ -99,64 +102,73 @@ CHECKFLAGS += -D__arm__
#Default value
head-y := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
textofs-y := 0x00008000
-
- machine-$(CONFIG_ARCH_RPC) := rpc
- machine-$(CONFIG_ARCH_EBSA110) := ebsa110
- machine-$(CONFIG_FOOTBRIDGE) := footbridge
- machine-$(CONFIG_ARCH_SHARK) := shark
- machine-$(CONFIG_ARCH_SA1100) := sa1100
-ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
# SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
- textofs-$(CONFIG_SA1111) := 0x00208000
+ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_SA1111) := 0x00208000
endif
- machine-$(CONFIG_ARCH_PXA) := pxa
- machine-$(CONFIG_ARCH_MMP) := mmp
- plat-$(CONFIG_PLAT_PXA) := pxa
- machine-$(CONFIG_ARCH_L7200) := l7200
- machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
- machine-$(CONFIG_ARCH_GEMINI) := gemini
- textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
- machine-$(CONFIG_ARCH_CLPS711X) := clps711x
- machine-$(CONFIG_ARCH_IOP32X) := iop32x
- machine-$(CONFIG_ARCH_IOP33X) := iop33x
- machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
- plat-$(CONFIG_PLAT_IOP) := iop
- machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
- machine-$(CONFIG_ARCH_IXP2000) := ixp2000
- machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
- machine-$(CONFIG_ARCH_OMAP1) := omap1
- machine-$(CONFIG_ARCH_OMAP2) := omap2
- machine-$(CONFIG_ARCH_OMAP3) := omap2
- plat-$(CONFIG_ARCH_OMAP) := omap
- machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
- machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
- plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
- machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
- plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c
- machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
- machine-$(CONFIG_ARCH_VERSATILE) := versatile
- machine-$(CONFIG_ARCH_IMX) := imx
- machine-$(CONFIG_ARCH_H720X) := h720x
- machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
- machine-$(CONFIG_ARCH_REALVIEW) := realview
- machine-$(CONFIG_ARCH_AT91) := at91
- machine-$(CONFIG_ARCH_EP93XX) := ep93xx
- machine-$(CONFIG_ARCH_PNX4008) := pnx4008
- machine-$(CONFIG_ARCH_NETX) := netx
- machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
- machine-$(CONFIG_ARCH_DAVINCI) := davinci
- machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
- machine-$(CONFIG_ARCH_KS8695) := ks8695
- plat-$(CONFIG_ARCH_MXC) := mxc
- machine-$(CONFIG_ARCH_MX2) := mx2
- machine-$(CONFIG_ARCH_MX3) := mx3
- machine-$(CONFIG_ARCH_MX1) := mx1
- machine-$(CONFIG_ARCH_ORION5X) := orion5x
- plat-$(CONFIG_PLAT_ORION) := orion
- machine-$(CONFIG_ARCH_MSM) := msm
- machine-$(CONFIG_ARCH_LOKI) := loki
- machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
- machine-$(CONFIG_ARCH_W90X900) := w90x900
+
+# Machine directory name. This list is sorted alphanumerically
+# by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
+machine-$(CONFIG_ARCH_AT91) := at91
+machine-$(CONFIG_ARCH_CLPS711X) := clps711x
+machine-$(CONFIG_ARCH_DAVINCI) := davinci
+machine-$(CONFIG_ARCH_EBSA110) := ebsa110
+machine-$(CONFIG_ARCH_EP93XX) := ep93xx
+machine-$(CONFIG_ARCH_GEMINI) := gemini
+machine-$(CONFIG_ARCH_H720X) := h720x
+machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
+machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
+machine-$(CONFIG_ARCH_IOP32X) := iop32x
+machine-$(CONFIG_ARCH_IOP33X) := iop33x
+machine-$(CONFIG_ARCH_IXP2000) := ixp2000
+machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
+machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
+machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
+machine-$(CONFIG_ARCH_KS8695) := ks8695
+machine-$(CONFIG_ARCH_L7200) := l7200
+machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
+machine-$(CONFIG_ARCH_LOKI) := loki
+machine-$(CONFIG_ARCH_MMP) := mmp
+machine-$(CONFIG_ARCH_MSM) := msm
+machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
+machine-$(CONFIG_ARCH_MX1) := mx1
+machine-$(CONFIG_ARCH_MX2) := mx2
+machine-$(CONFIG_ARCH_MX3) := mx3
+machine-$(CONFIG_ARCH_NETX) := netx
+machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
+machine-$(CONFIG_ARCH_OMAP1) := omap1
+machine-$(CONFIG_ARCH_OMAP2) := omap2
+machine-$(CONFIG_ARCH_OMAP3) := omap2
+machine-$(CONFIG_ARCH_OMAP4) := omap2
+machine-$(CONFIG_ARCH_ORION5X) := orion5x
+machine-$(CONFIG_ARCH_PNX4008) := pnx4008
+machine-$(CONFIG_ARCH_PXA) := pxa
+machine-$(CONFIG_ARCH_REALVIEW) := realview
+machine-$(CONFIG_ARCH_RPC) := rpc
+machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
+machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
+machine-$(CONFIG_ARCH_SA1100) := sa1100
+machine-$(CONFIG_ARCH_SHARK) := shark
+machine-$(CONFIG_ARCH_STMP378X) := stmp378x
+machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx
+machine-$(CONFIG_ARCH_U300) := u300
+machine-$(CONFIG_ARCH_VERSATILE) := versatile
+machine-$(CONFIG_ARCH_W90X900) := w90x900
+machine-$(CONFIG_FOOTBRIDGE) := footbridge
+
+# Platform directory name. This list is sorted alphanumerically
+# by CONFIG_* macro name.
+plat-$(CONFIG_ARCH_MXC) := mxc
+plat-$(CONFIG_ARCH_OMAP) := omap
+plat-$(CONFIG_PLAT_IOP) := iop
+plat-$(CONFIG_PLAT_ORION) := orion
+plat-$(CONFIG_PLAT_PXA) := pxa
+plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
+plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c
+plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index fbe5eef..ce39dc5 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -40,7 +40,7 @@ ifeq ($(CONFIG_PXA_SHARPSL),y)
OBJS += head-sharpsl.o
endif
-ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
+ifeq ($(CONFIG_CPU_ENDIAN_BE32),y)
ifeq ($(CONFIG_CPU_CP15),y)
OBJS += big-endian.o
else
@@ -78,6 +78,9 @@ EXTRA_AFLAGS := -Wa,-march=all
# linker symbols. We only define initrd_phys and params_phys if the
# machine class defined the corresponding makefile variable.
LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux += --be8
+endif
ifneq ($(INITRD_PHYS),)
LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS)
endif
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index b371fba..01d49be 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -438,6 +438,9 @@ __armv4_mmu_cache_on:
mrc p15, 0, r0, c1, c0, 0 @ read control reg
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
orr r0, r0, #0x0030
+#ifdef CONFIG_CPU_ENDIAN_BE8
+ orr r0, r0, #1 << 25 @ big-endian page tables
+#endif
bl __common_mmu_cache_on
mov r0, #0
mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
@@ -455,6 +458,9 @@ __armv7_mmu_cache_on:
mrc p15, 0, r0, c1, c0, 0 @ read control reg
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
orr r0, r0, #0x003c @ write buffer
+#ifdef CONFIG_CPU_ENDIAN_BE8
+ orr r0, r0, #1 << 25 @ big-endian page tables
+#endif
orrne r0, r0, #1 @ MMU enabled
movne r1, #-1
mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index a2cd9be..4efbb9d 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -4,6 +4,14 @@ config ARM_GIC
config ARM_VIC
bool
+config ARM_VIC_NR
+ int
+ default 2
+ depends on ARM_VIC
+ help
+ The maximum number of VICs available in the system, for
+ power management.
+
config ICST525
bool
@@ -27,10 +35,6 @@ config SHARP_LOCOMO
config SHARP_PARAM
bool
-config SHARPSL_PM
- bool
- select APM_EMULATION
-
config SHARP_SCOOP
bool
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 7cb7961..76be7ff 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_DMABOUNCE) += dmabounce.o
obj-$(CONFIG_TIMER_ACORN) += time-acorn.o
obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
-obj-$(CONFIG_SHARPSL_PM) += sharpsl_pm.o
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
obj-$(CONFIG_ARCH_IXP2000) += uengine.o
obj-$(CONFIG_ARCH_IXP23XX) += uengine.o
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index 5589444..f37afd9 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -135,6 +135,24 @@ struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
}
EXPORT_SYMBOL(clkdev_alloc);
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+ struct device *dev)
+{
+ struct clk *r = clk_get(dev, id);
+ struct clk_lookup *l;
+
+ if (IS_ERR(r))
+ return PTR_ERR(r);
+
+ l = clkdev_alloc(r, alias, alias_dev_name);
+ clk_put(r);
+ if (!l)
+ return -ENODEV;
+ clkdev_add(l);
+ return 0;
+}
+EXPORT_SYMBOL(clk_add_alias);
+
/*
* clkdev_drop - remove a clock dynamically allocated
*/
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
deleted file mode 100644
index 140f1d7..0000000
--- a/arch/arm/common/sharpsl_pm.c
+++ /dev/null
@@ -1,859 +0,0 @@
-/*
- * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
- * series of PDAs
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on code written by Sharp for 2.4 kernels
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/apm_bios.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/apm-emulation.h>
-#include <linux/suspend.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/pm.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/regs-rtc.h>
-#include <mach/sharpsl.h>
-#include <asm/hardware/sharpsl_pm.h>
-
-/*
- * Constants
- */
-#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */
-#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */
-#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */
-#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */
-
-#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */
-#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */
-#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */
-#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */
-#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */
-
-/*
- * Prototypes
- */
-#ifdef CONFIG_PM
-static int sharpsl_off_charge_battery(void);
-static int sharpsl_check_battery_voltage(void);
-static int sharpsl_fatal_check(void);
-#endif
-static int sharpsl_check_battery_temp(void);
-static int sharpsl_ac_check(void);
-static int sharpsl_average_value(int ad);
-static void sharpsl_average_clear(void);
-static void sharpsl_charge_toggle(struct work_struct *private_);
-static void sharpsl_battery_thread(struct work_struct *private_);
-
-
-/*
- * Variables
- */
-struct sharpsl_pm_status sharpsl_pm;
-DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
-DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
-DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
-
-
-static int get_percentage(int voltage)
-{
- int i = sharpsl_pm.machinfo->bat_levels - 1;
- int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
- struct battery_thresh *thresh;
-
- if (sharpsl_pm.charge_mode == CHRG_ON)
- thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
- else
- thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
-
- while (i > 0 && (voltage > thresh[i].voltage))
- i--;
-
- return thresh[i].percentage;
-}
-
-static int get_apm_status(int voltage)
-{
- int low_thresh, high_thresh;
-
- if (sharpsl_pm.charge_mode == CHRG_ON) {
- high_thresh = sharpsl_pm.machinfo->status_high_acin;
- low_thresh = sharpsl_pm.machinfo->status_low_acin;
- } else {
- high_thresh = sharpsl_pm.machinfo->status_high_noac;
- low_thresh = sharpsl_pm.machinfo->status_low_noac;
- }
-
- if (voltage >= high_thresh)
- return APM_BATTERY_STATUS_HIGH;
- if (voltage >= low_thresh)
- return APM_BATTERY_STATUS_LOW;
- return APM_BATTERY_STATUS_CRITICAL;
-}
-
-void sharpsl_battery_kick(void)
-{
- schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
-}
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
-
-static void sharpsl_battery_thread(struct work_struct *private_)
-{
- int voltage, percent, apm_status, i = 0;
-
- if (!sharpsl_pm.machinfo)
- return;
-
- sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
-
- /* Corgi cannot confirm when battery fully charged so periodically kick! */
- if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
- && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL))
- schedule_delayed_work(&toggle_charger, 0);
-
- while(1) {
- voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-
- if (voltage > 0) break;
- if (i++ > 5) {
- voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
- dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
- break;
- }
- }
-
- voltage = sharpsl_average_value(voltage);
- apm_status = get_apm_status(voltage);
- percent = get_percentage(voltage);
-
- /* At low battery voltages, the voltage has a tendency to start
- creeping back up so we try to avoid this here */
- if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) {
- sharpsl_pm.battstat.mainbat_voltage = voltage;
- sharpsl_pm.battstat.mainbat_status = apm_status;
- sharpsl_pm.battstat.mainbat_percent = percent;
- }
-
- dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
- sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
-
-#ifdef CONFIG_BACKLIGHT_CORGI
- /* If battery is low. limit backlight intensity to save power. */
- if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
- && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
- (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
- if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
- sharpsl_pm.machinfo->backlight_limit(1);
- sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
- }
- } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
- sharpsl_pm.machinfo->backlight_limit(0);
- sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
- }
-#endif
-
- /* Suspend if critical battery level */
- if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
- && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
- && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
- sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
- dev_err(sharpsl_pm.dev, "Fatal Off\n");
- apm_queue_event(APM_CRITICAL_SUSPEND);
- }
-
- schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
-}
-
-void sharpsl_pm_led(int val)
-{
- if (val == SHARPSL_LED_ERROR) {
- dev_err(sharpsl_pm.dev, "Charging Error!\n");
- } else if (val == SHARPSL_LED_ON) {
- dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
- led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
- } else {
- dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
- led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
- }
-}
-
-static void sharpsl_charge_on(void)
-{
- dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
-
- sharpsl_pm.full_count = 0;
- sharpsl_pm.charge_mode = CHRG_ON;
- schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
- schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
-}
-
-static void sharpsl_charge_off(void)
-{
- dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
-
- sharpsl_pm.machinfo->charge(0);
- sharpsl_pm_led(SHARPSL_LED_OFF);
- sharpsl_pm.charge_mode = CHRG_OFF;
-
- schedule_delayed_work(&sharpsl_bat, 0);
-}
-
-static void sharpsl_charge_error(void)
-{
- sharpsl_pm_led(SHARPSL_LED_ERROR);
- sharpsl_pm.machinfo->charge(0);
- sharpsl_pm.charge_mode = CHRG_ERROR;
-}
-
-static void sharpsl_charge_toggle(struct work_struct *private_)
-{
- dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
-
- if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
- sharpsl_charge_off();
- return;
- } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
- sharpsl_charge_error();
- return;
- }
-
- sharpsl_pm_led(SHARPSL_LED_ON);
- sharpsl_pm.machinfo->charge(0);
- mdelay(SHARPSL_CHARGE_WAIT_TIME);
- sharpsl_pm.machinfo->charge(1);
-
- sharpsl_pm.charge_start_time = jiffies;
-}
-
-static void sharpsl_ac_timer(unsigned long data)
-{
- int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
- dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
-
- sharpsl_average_clear();
- if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
- sharpsl_charge_on();
- else if (sharpsl_pm.charge_mode == CHRG_ON)
- sharpsl_charge_off();
-
- schedule_delayed_work(&sharpsl_bat, 0);
-}
-
-
-irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
-{
- /* Delay the event slightly to debounce */
- /* Must be a smaller delay than the chrg_full_isr below */
- mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
- return IRQ_HANDLED;
-}
-
-static void sharpsl_chrg_full_timer(unsigned long data)
-{
- dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
-
- sharpsl_pm.full_count++;
-
- if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
- dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
- if (sharpsl_pm.charge_mode == CHRG_ON)
- sharpsl_charge_off();
- } else if (sharpsl_pm.full_count < 2) {
- dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
- schedule_delayed_work(&toggle_charger, 0);
- } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
- dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
- schedule_delayed_work(&toggle_charger, 0);
- } else {
- sharpsl_charge_off();
- sharpsl_pm.charge_mode = CHRG_DONE;
- dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
- }
-}
-
-/* Charging Finished Interrupt (Not present on Corgi) */
-/* Can trigger at the same time as an AC status change so
- delay until after that has been processed */
-irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
-{
- if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
- return IRQ_HANDLED;
-
- /* delay until after any ac interrupt */
- mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
-
- return IRQ_HANDLED;
-}
-
-irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
-{
- int is_fatal = 0;
-
- if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
- dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
- is_fatal = 1;
- }
-
- if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
- dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
- is_fatal = 1;
- }
-
- if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
- sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
- apm_queue_event(APM_CRITICAL_SUSPEND);
- }
-
- return IRQ_HANDLED;
-}
-
-/*
- * Maintain an average of the last 10 readings
- */
-#define SHARPSL_CNV_VALUE_NUM 10
-static int sharpsl_ad_index;
-
-static void sharpsl_average_clear(void)
-{
- sharpsl_ad_index = 0;
-}
-
-static int sharpsl_average_value(int ad)
-{
- int i, ad_val = 0;
- static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
-
- if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
- sharpsl_ad_index = 0;
- return ad;
- }
-
- sharpsl_ad[sharpsl_ad_index] = ad;
- sharpsl_ad_index++;
- if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
- for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
- sharpsl_ad[i] = sharpsl_ad[i+1];
- sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
- }
- for (i=0; i < sharpsl_ad_index; i++)
- ad_val += sharpsl_ad[i];
-
- return (ad_val / sharpsl_ad_index);
-}
-
-/*
- * Take an array of 5 integers, remove the maximum and minimum values
- * and return the average.
- */
-static int get_select_val(int *val)
-{
- int i, j, k, temp, sum = 0;
-
- /* Find MAX val */
- temp = val[0];
- j=0;
- for (i=1; i<5; i++) {
- if (temp < val[i]) {
- temp = val[i];
- j = i;
- }
- }
-
- /* Find MIN val */
- temp = val[4];
- k=4;
- for (i=3; i>=0; i--) {
- if (temp > val[i]) {
- temp = val[i];
- k = i;
- }
- }
-
- for (i=0; i<5; i++)
- if (i != j && i != k )
- sum += val[i];
-
- dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
-
- return (sum/3);
-}
-
-static int sharpsl_check_battery_temp(void)
-{
- int val, i, buff[5];
-
- /* Check battery temperature */
- for (i=0; i<5; i++) {
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
- sharpsl_pm.machinfo->measure_temp(1);
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
- buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
- sharpsl_pm.machinfo->measure_temp(0);
- }
-
- val = get_select_val(buff);
-
- dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
- if (val > sharpsl_pm.machinfo->charge_on_temp) {
- printk(KERN_WARNING "Not charging: temperature out of limits.\n");
- return -1;
- }
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_check_battery_voltage(void)
-{
- int val, i, buff[5];
-
- /* disable charge, enable discharge */
- sharpsl_pm.machinfo->charge(0);
- sharpsl_pm.machinfo->discharge(1);
- mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-
- if (sharpsl_pm.machinfo->discharge1)
- sharpsl_pm.machinfo->discharge1(1);
-
- /* Check battery voltage */
- for (i=0; i<5; i++) {
- buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
- }
-
- if (sharpsl_pm.machinfo->discharge1)
- sharpsl_pm.machinfo->discharge1(0);
-
- sharpsl_pm.machinfo->discharge(0);
-
- val = get_select_val(buff);
- dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
-
- if (val < sharpsl_pm.machinfo->charge_on_volt)
- return -1;
-
- return 0;
-}
-#endif
-
-static int sharpsl_ac_check(void)
-{
- int temp, i, buff[5];
-
- for (i=0; i<5; i++) {
- buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
- }
-
- temp = get_select_val(buff);
- dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
-
- if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
- dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
- return -1;
- }
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
-{
- sharpsl_pm.flags |= SHARPSL_SUSPENDED;
- flush_scheduled_work();
-
- if (sharpsl_pm.charge_mode == CHRG_ON)
- sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
- else
- sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-
- return 0;
-}
-
-static int sharpsl_pm_resume(struct platform_device *pdev)
-{
- /* Clear the reset source indicators as they break the bootloader upon reboot */
- RCSR = 0x0f;
- sharpsl_average_clear();
- sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
- sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
-
- return 0;
-}
-
-static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
- dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
-
- dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
- /* not charging and AC-IN! */
-
- if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
- dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
- sharpsl_pm.charge_mode = CHRG_OFF;
- sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
- sharpsl_off_charge_battery();
- }
-
- sharpsl_pm.machinfo->presuspend();
-
- PEDR = 0xffffffff; /* clear it */
-
- sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
- if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
- RTSR &= RTSR_ALE;
- RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
- dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
- sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
- } else if (alarm_enable) {
- RTSR &= RTSR_ALE;
- RTAR = alarm_time;
- dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
- } else {
- dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
- }
-
- pxa_pm_enter(state);
-
- sharpsl_pm.machinfo->postsuspend();
-
- dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
-}
-
-static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
- if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
- {
- if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
- dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
- corgi_goto_sleep(alarm_time, alarm_enable, state);
- return 1;
- }
- if(sharpsl_off_charge_battery()) {
- dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
- corgi_goto_sleep(alarm_time, alarm_enable, state);
- return 1;
- }
- dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
- }
-
- if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
- {
- dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
- corgi_goto_sleep(alarm_time, alarm_enable, state);
- return 1;
- }
-
- return 0;
-}
-
-static int corgi_pxa_pm_enter(suspend_state_t state)
-{
- unsigned long alarm_time = RTAR;
- unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
-
- dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
-
- corgi_goto_sleep(alarm_time, alarm_status, state);
-
- while (corgi_enter_suspend(alarm_time,alarm_status,state))
- {}
-
- if (sharpsl_pm.machinfo->earlyresume)
- sharpsl_pm.machinfo->earlyresume();
-
- dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
-
- return 0;
-}
-
-/*
- * Check for fatal battery errors
- * Fatal returns -1
- */
-static int sharpsl_fatal_check(void)
-{
- int buff[5], temp, i, acin;
-
- dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
-
- /* Check AC-Adapter */
- acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
- if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
- sharpsl_pm.machinfo->charge(0);
- udelay(100);
- sharpsl_pm.machinfo->discharge(1); /* enable discharge */
- mdelay(SHARPSL_WAIT_DISCHARGE_ON);
- }
-
- if (sharpsl_pm.machinfo->discharge1)
- sharpsl_pm.machinfo->discharge1(1);
-
- /* Check battery : check inserting battery ? */
- for (i=0; i<5; i++) {
- buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
- mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
- }
-
- if (sharpsl_pm.machinfo->discharge1)
- sharpsl_pm.machinfo->discharge1(0);
-
- if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
- udelay(100);
- sharpsl_pm.machinfo->charge(1);
- sharpsl_pm.machinfo->discharge(0);
- }
-
- temp = get_select_val(buff);
- dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
-
- if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
- (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
- return -1;
- return 0;
-}
-
-static int sharpsl_off_charge_error(void)
-{
- dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
- sharpsl_pm.machinfo->charge(0);
- sharpsl_pm_led(SHARPSL_LED_ERROR);
- sharpsl_pm.charge_mode = CHRG_ERROR;
- return 1;
-}
-
-/*
- * Charging Control while suspended
- * Return 1 - go straight to sleep
- * Return 0 - sleep or wakeup depending on other factors
- */
-static int sharpsl_off_charge_battery(void)
-{
- int time;
-
- dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
-
- if (sharpsl_pm.charge_mode == CHRG_OFF) {
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
-
- /* AC Check */
- if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
- return sharpsl_off_charge_error();
-
- /* Start Charging */
- sharpsl_pm_led(SHARPSL_LED_ON);
- sharpsl_pm.machinfo->charge(0);
- mdelay(SHARPSL_CHARGE_WAIT_TIME);
- sharpsl_pm.machinfo->charge(1);
-
- sharpsl_pm.charge_mode = CHRG_ON;
- sharpsl_pm.full_count = 0;
-
- return 1;
- } else if (sharpsl_pm.charge_mode != CHRG_ON) {
- return 1;
- }
-
- if (sharpsl_pm.full_count == 0) {
- int time;
-
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
-
- if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
- return sharpsl_off_charge_error();
-
- sharpsl_pm.machinfo->charge(0);
- mdelay(SHARPSL_CHARGE_WAIT_TIME);
- sharpsl_pm.machinfo->charge(1);
- sharpsl_pm.charge_mode = CHRG_ON;
-
- mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
- time = RCNR;
- while(1) {
- /* Check if any wakeup event had occurred */
- if (sharpsl_pm.machinfo->charger_wakeup() != 0)
- return 0;
- /* Check for timeout */
- if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
- return 1;
- if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
- sharpsl_pm.full_count++;
- sharpsl_pm.machinfo->charge(0);
- mdelay(SHARPSL_CHARGE_WAIT_TIME);
- sharpsl_pm.machinfo->charge(1);
- return 1;
- }
- }
- }
-
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
-
- mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
- time = RCNR;
- while(1) {
- /* Check if any wakeup event had occurred */
- if (sharpsl_pm.machinfo->charger_wakeup() != 0)
- return 0;
- /* Check for timeout */
- if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
- if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
- sharpsl_pm.full_count = 0;
- }
- sharpsl_pm.full_count++;
- return 1;
- }
- if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
- dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
- sharpsl_pm_led(SHARPSL_LED_OFF);
- sharpsl_pm.machinfo->charge(0);
- sharpsl_pm.charge_mode = CHRG_DONE;
- return 1;
- }
- }
-}
-#else
-#define sharpsl_pm_suspend NULL
-#define sharpsl_pm_resume NULL
-#endif
-
-static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
-}
-
-static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
-}
-
-static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
-static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
-
-extern void (*apm_get_power_status)(struct apm_power_info *);
-
-static void sharpsl_apm_get_power_status(struct apm_power_info *info)
-{
- info->ac_line_status = sharpsl_pm.battstat.ac_status;
-
- if (sharpsl_pm.charge_mode == CHRG_ON)
- info->battery_status = APM_BATTERY_STATUS_CHARGING;
- else
- info->battery_status = sharpsl_pm.battstat.mainbat_status;
-
- info->battery_flag = (1 << info->battery_status);
- info->battery_life = sharpsl_pm.battstat.mainbat_percent;
-}
-
-#ifdef CONFIG_PM
-static struct platform_suspend_ops sharpsl_pm_ops = {
- .enter = corgi_pxa_pm_enter,
- .valid = suspend_valid_only_mem,
-};
-#endif
-
-static int __init sharpsl_pm_probe(struct platform_device *pdev)
-{
- int ret;
-
- if (!pdev->dev.platform_data)
- return -EINVAL;
-
- sharpsl_pm.dev = &pdev->dev;
- sharpsl_pm.machinfo = pdev->dev.platform_data;
- sharpsl_pm.charge_mode = CHRG_OFF;
- sharpsl_pm.flags = 0;
-
- init_timer(&sharpsl_pm.ac_timer);
- sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
-
- init_timer(&sharpsl_pm.chrg_full_timer);
- sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
-
- led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
-
- sharpsl_pm.machinfo->init();
-
- ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
- ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
- if (ret != 0)
- dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
-
- apm_get_power_status = sharpsl_apm_get_power_status;
-
-#ifdef CONFIG_PM
- suspend_set_ops(&sharpsl_pm_ops);
-#endif
-
- mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
- return 0;
-}
-
-static int sharpsl_pm_remove(struct platform_device *pdev)
-{
- suspend_set_ops(NULL);
-
- device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
- device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
-
- led_trigger_unregister_simple(sharpsl_charge_led_trigger);
-
- sharpsl_pm.machinfo->exit();
-
- del_timer_sync(&sharpsl_pm.chrg_full_timer);
- del_timer_sync(&sharpsl_pm.ac_timer);
-
- return 0;
-}
-
-static struct platform_driver sharpsl_pm_driver = {
- .probe = sharpsl_pm_probe,
- .remove = sharpsl_pm_remove,
- .suspend = sharpsl_pm_suspend,
- .resume = sharpsl_pm_resume,
- .driver = {
- .name = "sharpsl-pm",
- },
-};
-
-static int __devinit sharpsl_pm_init(void)
-{
- return platform_driver_register(&sharpsl_pm_driver);
-}
-
-static void sharpsl_pm_exit(void)
-{
- platform_driver_unregister(&sharpsl_pm_driver);
-}
-
-late_initcall(sharpsl_pm_init);
-module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index b2a781d..887c6eb 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
+#include <linux/sysdev.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
@@ -39,11 +40,219 @@ static void vic_unmask_irq(unsigned int irq)
writel(1 << irq, base + VIC_INT_ENABLE);
}
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registeration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+ int i;
+
+ for (i = 0; i < 16; i++) {
+ void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+ writel(VIC_VECT_CNTL_ENABLE | i, reg);
+ }
+
+ writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
+
+#if defined(CONFIG_PM)
+/**
+ * struct vic_device - VIC PM device
+ * @sysdev: The system device which is registered.
+ * @irq: The IRQ number for the base of the VIC.
+ * @base: The register base for the VIC.
+ * @resume_sources: A bitmask of interrupts for resume.
+ * @resume_irqs: The IRQs enabled for resume.
+ * @int_select: Save for VIC_INT_SELECT.
+ * @int_enable: Save for VIC_INT_ENABLE.
+ * @soft_int: Save for VIC_INT_SOFT.
+ * @protect: Save for VIC_PROTECT.
+ */
+struct vic_device {
+ struct sys_device sysdev;
+
+ void __iomem *base;
+ int irq;
+ u32 resume_sources;
+ u32 resume_irqs;
+ u32 int_select;
+ u32 int_enable;
+ u32 soft_int;
+ u32 protect;
+};
+
+/* we cannot allocate memory when VICs are initially registered */
+static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
+
+static inline struct vic_device *to_vic(struct sys_device *sys)
+{
+ return container_of(sys, struct vic_device, sysdev);
+}
+
+static int vic_id;
+
+static int vic_class_resume(struct sys_device *dev)
+{
+ struct vic_device *vic = to_vic(dev);
+ void __iomem *base = vic->base;
+
+ printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
+
+ /* re-initialise static settings */
+ vic_init2(base);
+
+ writel(vic->int_select, base + VIC_INT_SELECT);
+ writel(vic->protect, base + VIC_PROTECT);
+
+ /* set the enabled ints and then clear the non-enabled */
+ writel(vic->int_enable, base + VIC_INT_ENABLE);
+ writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR);
+
+ /* and the same for the soft-int register */
+
+ writel(vic->soft_int, base + VIC_INT_SOFT);
+ writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
+
+ return 0;
+}
+
+static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
+{
+ struct vic_device *vic = to_vic(dev);
+ void __iomem *base = vic->base;
+
+ printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
+
+ vic->int_select = readl(base + VIC_INT_SELECT);
+ vic->int_enable = readl(base + VIC_INT_ENABLE);
+ vic->soft_int = readl(base + VIC_INT_SOFT);
+ vic->protect = readl(base + VIC_PROTECT);
+
+ /* set the interrupts (if any) that are used for
+ * resuming the system */
+
+ writel(vic->resume_irqs, base + VIC_INT_ENABLE);
+ writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
+
+ return 0;
+}
+
+struct sysdev_class vic_class = {
+ .name = "vic",
+ .suspend = vic_class_suspend,
+ .resume = vic_class_resume,
+};
+
+/**
+ * vic_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+{
+ struct vic_device *v;
+
+ if (vic_id >= ARRAY_SIZE(vic_devices))
+ printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+ else {
+ v = &vic_devices[vic_id];
+ v->base = base;
+ v->resume_sources = resume_sources;
+ v->irq = irq;
+ vic_id++;
+ }
+}
+
+/**
+ * vic_pm_init - initicall to register VIC pm
+ *
+ * This is called via late_initcall() to register
+ * the resources for the VICs due to the early
+ * nature of the VIC's registration.
+*/
+static int __init vic_pm_init(void)
+{
+ struct vic_device *dev = vic_devices;
+ int err;
+ int id;
+
+ if (vic_id == 0)
+ return 0;
+
+ err = sysdev_class_register(&vic_class);
+ if (err) {
+ printk(KERN_ERR "%s: cannot register class\n", __func__);
+ return err;
+ }
+
+ for (id = 0; id < vic_id; id++, dev++) {
+ dev->sysdev.id = id;
+ dev->sysdev.cls = &vic_class;
+
+ err = sysdev_register(&dev->sysdev);
+ if (err) {
+ printk(KERN_ERR "%s: failed to register device\n",
+ __func__);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+late_initcall(vic_pm_init);
+
+static struct vic_device *vic_from_irq(unsigned int irq)
+{
+ struct vic_device *v = vic_devices;
+ unsigned int base_irq = irq & ~31;
+ int id;
+
+ for (id = 0; id < vic_id; id++, v++) {
+ if (v->irq == base_irq)
+ return v;
+ }
+
+ return NULL;
+}
+
+static int vic_set_wake(unsigned int irq, unsigned int on)
+{
+ struct vic_device *v = vic_from_irq(irq);
+ unsigned int off = irq & 31;
+
+ if (!v)
+ return -EINVAL;
+
+ if (on)
+ v->resume_irqs |= 1 << off;
+ else
+ v->resume_irqs &= ~(1 << off);
+
+ return 0;
+}
+
+#else
+static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
+
+#define vic_set_wake NULL
+#endif /* CONFIG_PM */
+
static struct irq_chip vic_chip = {
.name = "VIC",
.ack = vic_mask_irq,
.mask = vic_mask_irq,
.unmask = vic_unmask_irq,
+ .set_wake = vic_set_wake,
};
/**
@@ -51,9 +260,10 @@ static struct irq_chip vic_chip = {
* @base: iomem base address
* @irq_start: starting interrupt number, must be muliple of 32
* @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
*/
void __init vic_init(void __iomem *base, unsigned int irq_start,
- u32 vic_sources)
+ u32 vic_sources, u32 resume_sources)
{
unsigned int i;
@@ -77,12 +287,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
writel(value, base + VIC_PL190_VECT_ADDR);
}
- for (i = 0; i < 16; i++) {
- void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
- writel(VIC_VECT_CNTL_ENABLE | i, reg);
- }
-
- writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+ vic_init2(base);
for (i = 0; i < 32; i++) {
if (vic_sources & (1 << i)) {
@@ -94,4 +299,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
+
+ vic_pm_register(base, irq_start, resume_sources);
}
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index 227da08..d18d21b 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc3
-# Tue Aug 19 11:26:54 2008
+# Linux kernel version: 2.6.30-rc8
+# Thu Jun 4 09:53:21 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
@@ -44,15 +42,24 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -61,31 +68,37 @@ CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
@@ -93,19 +106,13 @@ CONFIG_SLUB=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -113,11 +120,8 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -133,7 +137,7 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type
@@ -143,10 +147,10 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@@ -167,14 +171,17 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Intel PXA2xx/PXA3xx Implementations
@@ -187,16 +194,24 @@ CONFIG_CPU_PXA300=y
# CONFIG_CPU_PXA310 is not set
# CONFIG_CPU_PXA320 is not set
# CONFIG_CPU_PXA930 is not set
+# CONFIG_CPU_PXA935 is not set
# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
# CONFIG_MACH_ZYLONITE is not set
# CONFIG_MACH_LITTLETON is not set
# CONFIG_MACH_TAVOREVB is not set
@@ -204,19 +219,15 @@ CONFIG_CPU_PXA300=y
# CONFIG_MACH_ARMCORE is not set
CONFIG_MACH_CM_X300=y
# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
# CONFIG_MACH_PCM027 is not set
# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
# CONFIG_PXA_EZX is not set
CONFIG_PXA3xx=y
# CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_PLAT_PXA=y
#
# Processor Type
@@ -241,6 +252,7 @@ CONFIG_IO_36=y
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_XSC3L2=y
CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
@@ -256,25 +268,33 @@ CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -287,7 +307,7 @@ CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400"
# CONFIG_KEXEC is not set
#
-# CPU Frequency scaling
+# CPU Power Management
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
@@ -304,6 +324,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
@@ -320,6 +341,8 @@ CONFIG_FPE_NWFPE=y
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
@@ -376,6 +399,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -385,7 +409,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -407,8 +433,7 @@ CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
@@ -416,19 +441,15 @@ CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -453,6 +474,7 @@ CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
@@ -494,7 +516,6 @@ CONFIG_MTD_CFI_I2=y
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -516,16 +537,23 @@ CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_SHARPSL is not set
CONFIG_MTD_NAND_PXA3xx=y
+# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -585,11 +613,15 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -604,11 +636,17 @@ CONFIG_MII=y
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=0
CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -624,10 +662,13 @@ CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
@@ -677,18 +718,21 @@ CONFIG_KEYBOARD_PXA27x=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -721,10 +765,10 @@ CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
@@ -763,12 +807,8 @@ CONFIG_I2C_PXA=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -782,6 +822,10 @@ CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
#
+# Memory mapped GPIO expanders:
+#
+
+#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
@@ -798,12 +842,14 @@ CONFIG_GPIO_PCA953X=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -811,12 +857,19 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -842,6 +895,7 @@ CONFIG_SSB_POSSIBLE=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -862,12 +916,15 @@ CONFIG_FB_CFB_IMAGEBLIT=y
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
# CONFIG_FB_PXA_SMARTPANEL is not set
# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_MBX is not set
# CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -899,9 +956,11 @@ CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
@@ -916,12 +975,15 @@ CONFIG_SND_DRIVERS=y
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_LIB=m
# CONFIG_SND_PXA2XX_AC97 is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=m
CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
@@ -932,9 +994,39 @@ CONFIG_HID_DEBUG=y
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -952,11 +1044,14 @@ CONFIG_USB_DEVICEFS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
@@ -965,6 +1060,7 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
#
@@ -973,20 +1069,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
@@ -994,7 +1090,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
@@ -1015,6 +1110,7 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1022,7 +1118,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1031,13 +1126,20 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
@@ -1045,10 +1147,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_PXA=m
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -1057,7 +1161,10 @@ CONFIG_LEDS_CLASS=y
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@@ -1065,7 +1172,13 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1096,6 +1209,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
@@ -1105,28 +1219,27 @@ CONFIG_RTC_INTF_DEV=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_V3020=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_PXA is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1135,15 +1248,18 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1153,6 +1269,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1173,15 +1294,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1201,6 +1320,7 @@ CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -1209,6 +1329,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1313,6 +1434,7 @@ CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1329,6 +1451,7 @@ CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
@@ -1336,22 +1459,38 @@ CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1363,17 +1502,28 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1442,15 +1592,21 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
@@ -1460,7 +1616,10 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index eb2738b..ac18662 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Wed Apr 15 08:16:53 2009
+# Linux kernel version: 2.6.30-rc7
+# Tue May 26 07:24:28 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -179,6 +179,7 @@ CONFIG_ARCH_DAVINCI=y
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_W90X900 is not set
+CONFIG_AINTC=y
#
# TI DaVinci Implementations
@@ -188,11 +189,17 @@ CONFIG_ARCH_DAVINCI=y
# DaVinci Core Type
#
CONFIG_ARCH_DAVINCI_DM644x=y
+CONFIG_ARCH_DAVINCI_DM355=y
+CONFIG_ARCH_DAVINCI_DM646x=y
#
# DaVinci Board Type
#
CONFIG_MACH_DAVINCI_EVM=y
+CONFIG_MACH_SFFSDR=y
+CONFIG_MACH_DAVINCI_DM355_EVM=y
+CONFIG_MACH_DM355_LEOPARD=y
+CONFIG_MACH_DAVINCI_DM6467_EVM=y
CONFIG_DAVINCI_MUX=y
CONFIG_DAVINCI_MUX_DEBUG=y
CONFIG_DAVINCI_MUX_WARNINGS=y
@@ -245,7 +252,7 @@ CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
@@ -661,7 +668,10 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
+CONFIG_TI_DAVINCI_EMAC=y
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
@@ -963,6 +973,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_DM355EVM_MSP is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
@@ -1317,6 +1328,7 @@ CONFIG_MMC_BLOCK=m
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_DAVINCI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
@@ -1778,6 +1790,7 @@ CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 3f89d5f..3fb083b 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,12 +1,19 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:24 2006
+# Linux kernel version: 2.6.30-rc3
+# Tue May 19 12:26:49 2009
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
@@ -15,42 +22,54 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -58,31 +77,38 @@ CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -96,6 +122,7 @@ CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
#
# System Type
@@ -105,29 +132,40 @@ CONFIG_DEFAULT_IOSCHED="deadline"
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
CONFIG_ARCH_EP93XX=y
# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
#
@@ -138,14 +176,24 @@ CONFIG_CRUNCH=y
#
# EP93xx Platforms
#
+# CONFIG_EP93XX_SDCE0_PHYS_OFFSET is not set
+CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET=y
CONFIG_MACH_ADSSPHERE=y
+CONFIG_MACH_EDB93XX=y
+CONFIG_MACH_EDB9301=y
CONFIG_MACH_EDB9302=y
-CONFIG_MACH_EDB9302A=y
+CONFIG_MACH_EDB9307=y
CONFIG_MACH_EDB9312=y
CONFIG_MACH_EDB9315=y
-CONFIG_MACH_EDB9315A=y
CONFIG_MACH_GESBC9312=y
+CONFIG_MACH_MICRO9=y
+CONFIG_MACH_MICRO9H=y
+CONFIG_MACH_MICRO9M=y
+CONFIG_MACH_MICRO9L=y
CONFIG_MACH_TS72XX=y
+CONFIG_EP93XX_EARLY_UART1=y
+# CONFIG_EP93XX_EARLY_UART2 is not set
+# CONFIG_EP93XX_EARLY_UART3 is not set
#
# Processor Type
@@ -154,6 +202,7 @@ CONFIG_CPU_32=y
CONFIG_CPU_ARM920T=y
CONFIG_CPU_32v4T=y
CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
@@ -168,34 +217,47 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
CONFIG_ARM_VIC=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
#
CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -205,6 +267,12 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
@@ -221,32 +289,31 @@ CONFIG_FPE_NWFPE_XP=y
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
@@ -267,6 +334,7 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -276,6 +344,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
@@ -289,25 +358,15 @@ CONFIG_IPV6=y
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -317,20 +376,28 @@ CONFIG_IPV6=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -339,41 +406,39 @@ CONFIG_IPV6=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -404,16 +469,13 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
@@ -431,49 +493,58 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_TS7250=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_TS7250 is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
+# LPDDR flash memory drivers
#
+# CONFIG_MTD_LPDDR is not set
#
-# Block devices
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
@@ -495,6 +566,7 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
@@ -502,92 +574,71 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_EP93XX_ETH=y
+# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
#
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
-# CONFIG_NET_RADIO is not set
#
-# Wan interfaces
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
#
@@ -605,6 +656,7 @@ CONFIG_EP93XX_ETH=y
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -621,104 +673,101 @@ CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_EP93XX_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
-# TPM devices
+# I2C Hardware Bus support
#
-# CONFIG_TCG_TPM is not set
#
-# I2C support
+# I2C system bus drivers (mostly embedded / system-on-chip)
#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
#
-# I2C Algorithms
+# External I2C/SMBus adapter drivers
#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
#
-# I2C Hardware Bus support
+# Other I2C/SMBus bus drivers
#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=y
+# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
-# SPI support
+# Memory mapped GPIO expanders:
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
#
-# Dallas's 1-wire bus
+# I2C GPIO expanders:
#
-# CONFIG_W1 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
#
-# Hardware Monitoring support
+# PCI GPIO expanders:
#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -732,158 +781,188 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
#
-# Misc devices
+# Watchdog Device Drivers
#
-# CONFIG_TIFM_CORE is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_EP93XX_WATCHDOG=y
#
-# LED devices
+# USB-based Watchdog Cards
#
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# LED drivers
+# Sonics Silicon Backplane
#
+# CONFIG_SSB is not set
#
-# LED Triggers
+# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia drivers
#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
+# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
-# USB Input Devices
-#
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-CONFIG_USB_RTL8150=y
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_EZUSB is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
@@ -895,6 +974,7 @@ CONFIG_USB_SERIAL_CONSOLE=y
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
@@ -902,16 +982,23 @@ CONFIG_USB_SERIAL_CONSOLE=y
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
@@ -920,38 +1007,34 @@ CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# OTG and related infrastructure
#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -965,24 +1048,55 @@ CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# RTC drivers
+# I2C RTC drivers
#
-# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
CONFIG_RTC_DRV_EP93XX=y
+# CONFIG_RTC_DRV_PL030 is not set
# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -991,27 +1105,31 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1032,16 +1150,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1049,33 +1164,35 @@ CONFIG_RAMFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
@@ -1087,7 +1204,6 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1109,10 +1225,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -1153,49 +1266,83 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
@@ -1204,21 +1351,115 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
#
-# Cryptographic options
+# Random Number Generation
#
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index dcf8153..0a1abb9 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -182,6 +182,7 @@ CONFIG_ARCH_KIRKWOOD=y
CONFIG_MACH_DB88F6281_BP=y
CONFIG_MACH_RD88F6192_NAS=y
CONFIG_MACH_RD88F6281=y
+CONFIG_MACH_MV88F6281GTW_GE=y
CONFIG_MACH_SHEEVAPLUG=y
CONFIG_MACH_TS219=y
CONFIG_PLAT_ORION=y
@@ -270,7 +271,9 @@ CONFIG_CMDLINE=""
#
# CPU Power Management
#
-# CONFIG_CPU_IDLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
#
# Floating point emulation
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index f56837f..957fd5f 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -190,6 +190,7 @@ CONFIG_ARCH_PXA=y
# CONFIG_MACH_SAAR is not set
# CONFIG_MACH_ARMCORE is not set
# CONFIG_MACH_CM_X300 is not set
+CONFIG_MACH_H4700=y
CONFIG_MACH_MAGICIAN=y
# CONFIG_MACH_MIOA701 is not set
# CONFIG_MACH_PCM027 is not set
@@ -828,7 +829,7 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
+CONFIG_MFD_ASIC3=y
CONFIG_HTC_EGPIO=y
CONFIG_HTC_PASIC3=y
# CONFIG_TPS65010 is not set
@@ -891,7 +892,7 @@ CONFIG_FB_PXA_OVERLAY=y
# CONFIG_FB_PXA_SMARTPANEL is not set
# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
+CONFIG_FB_W100=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig
new file mode 100644
index 0000000..4b04290
--- /dev/null
+++ b/arch/arm/configs/mx21_defconfig
@@ -0,0 +1,1170 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc1
+# Tue Apr 14 16:58:09 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+CONFIG_MACH_MX21=y
+# CONFIG_MACH_MX27 is not set
+
+#
+# MX2 platforms:
+#
+CONFIG_MACH_MX21ADS=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_PWM=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_NONISA_IRQ=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_IMX=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+# CONFIG_VFAT_FS is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
new file mode 100644
index 0000000..28be17f
--- /dev/null
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -0,0 +1,1528 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc5
+# Mon May 18 14:01:52 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+CONFIG_MACH_OMAP3EVM=y
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMC911X=y
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=m
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
new file mode 100644
index 0000000..23e43ea
--- /dev/null
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -0,0 +1,866 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc7
+# Tue Jun 9 12:36:23 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+CONFIG_ARCH_OMAP4=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_4430SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_DISABLE=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_GIC=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
+CONFIG_HAVE_MLOCK=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
new file mode 100644
index 0000000..213fe9c
--- /dev/null
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -0,0 +1,1211 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Fri Oct 10 11:49:41 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+CONFIG_MACH_OMAP_ZOOM2=y
+# CONFIG_MACH_OVERO is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 5b98f76..9e23852 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -903,7 +903,8 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_TIMERIOMEM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 593102da..eb2cb31 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig
new file mode 100644
index 0000000..44461f1
--- /dev/null
+++ b/arch/arm/configs/stmp378x_defconfig
@@ -0,0 +1,1141 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Thu Apr 23 02:44:13 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-default"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_STMP3XXX=y
+
+#
+# Freescale STMP3xxx implementations
+#
+# CONFIG_ARCH_STMP37XX is not set
+CONFIG_ARCH_STMP378X=y
+# CONFIG_MACH_STMP37XX is not set
+CONFIG_MACH_STMP378X=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_TESTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=6144
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_V4L1_COMPAT is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+
+#
+# RDS decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_DEBUG_OBJECTS=y
+CONFIG_DEBUG_OBJECTS_SELFTEST=y
+CONFIG_DEBUG_OBJECTS_FREE=y
+CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SLAB_LEAK=y
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+CONFIG_DEBUG_KOBJECT=y
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+CONFIG_FUNCTION_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+CONFIG_CONTEXT_SWITCH_TRACER=y
+# CONFIG_EVENT_TRACER is not set
+CONFIG_BOOT_TRACER=y
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_STACK_TRACER=y
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig
new file mode 100644
index 0000000..401279d
--- /dev/null
+++ b/arch/arm/configs/stmp37xx_defconfig
@@ -0,0 +1,1002 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29.1
+# Mon Apr 20 04:41:26 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-default"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_STMP3XXX=y
+
+#
+# Freescale STMP3xxx implementations
+#
+CONFIG_ARCH_STMP37XX=y
+# CONFIG_ARCH_STMP378X is not set
+CONFIG_MACH_STMP37XX=y
+# CONFIG_MACH_STMP378X is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=6144
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_STMP_DBG is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_V4L1_COMPAT is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+CONFIG_FUNCTION_TRACER=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_BOOT_TRACER=y
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_STACK_TRACER=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
new file mode 100644
index 0000000..2d827e1
--- /dev/null
+++ b/arch/arm/configs/u300_defconfig
@@ -0,0 +1,1115 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc6
+# Mon Jun 1 09:18:22 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_U300=y
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# ST-Ericsson AB U300/U330/U335/U365 Platform
+#
+
+#
+# ST-Ericsson Mobile Platform Products
+#
+CONFIG_MACH_U300=y
+
+#
+# ST-Ericsson U300/U330/U335/U365 Feature Selections
+#
+# CONFIG_MACH_U300_BS2X is not set
+# CONFIG_MACH_U300_BS330 is not set
+CONFIG_MACH_U300_BS335=y
+# CONFIG_MACH_U300_BS365 is not set
+# CONFIG_MACH_U300_SINGLE_RAM is not set
+CONFIG_MACH_U300_DUAL_RAM=y
+CONFIG_U300_DEBUG=y
+# CONFIG_MACH_U300_SEMI_IS_SHARED is not set
+
+#
+# All the settings below must match the bootloader's settings
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_VIC=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_ARMMMCI=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/w90p910_defconfig b/arch/arm/configs/w90p910_defconfig
index 56bda7c..5245655 100644
--- a/arch/arm/configs/w90p910_defconfig
+++ b/arch/arm/configs/w90p910_defconfig
@@ -1,11 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8-git8
-# Sat Nov 15 10:05:00 2008
+# Linux kernel version: 2.6.30
+# Wed Jun 10 22:09:25 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
# CONFIG_GENERIC_TIME is not set
# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_MMU=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -42,10 +40,19 @@ CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
@@ -56,52 +63,53 @@ CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_LSF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# System Type
@@ -127,10 +135,10 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@@ -151,23 +159,17 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
CONFIG_ARCH_W90X900=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
CONFIG_CPU_W90P910=y
#
@@ -198,6 +200,7 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
@@ -209,27 +212,32 @@ CONFIG_ARM_THUMB=y
#
# Kernel Features
#
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -237,12 +245,17 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 initrd=0xa00000,4000000 mem=64M"
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
# Floating point emulation
#
@@ -258,6 +271,8 @@ CONFIG_FPE_NWFPE=y
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
@@ -282,11 +297,93 @@ CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
@@ -300,9 +397,41 @@ CONFIG_HAVE_IDE=y
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
@@ -354,38 +483,57 @@ CONFIG_HW_CONSOLE=y
#
# Serial drivers
#
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_W90X900=y
-# CONFIG_SERIAL_W90X900_PORT1 is not set
-# CONFIG_SERIAL_W90X900_PORT2 is not set
-# CONFIG_SERIAL_W90X900_PORT3 is not set
-# CONFIG_SERIAL_W90X900_PORT4 is not set
-CONFIG_SERIAL_W90X900_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -393,10 +541,11 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
#
# Multimedia devices
@@ -433,33 +582,131 @@ CONFIG_SSB_POSSIBLE=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
@@ -469,6 +716,11 @@ CONFIG_FS_POSIX_ACL=y
CONFIG_GENERIC_ACL=y
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -486,15 +738,13 @@ CONFIG_GENERIC_ACL=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -502,15 +752,22 @@ CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
#
# Partition Types
@@ -586,18 +843,36 @@ CONFIG_FRAME_WARN=1024
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
#
@@ -605,14 +880,15 @@ CONFIG_HAVE_ARCH_KGDB=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
@@ -620,7 +896,10 @@ CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 7b9d27e..b3e656c 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -8,6 +8,21 @@
#define CPUID_TCM 2
#define CPUID_TLBTYPE 3
+#define CPUID_EXT_PFR0 "c1, 0"
+#define CPUID_EXT_PFR1 "c1, 1"
+#define CPUID_EXT_DFR0 "c1, 2"
+#define CPUID_EXT_AFR0 "c1, 3"
+#define CPUID_EXT_MMFR0 "c1, 4"
+#define CPUID_EXT_MMFR1 "c1, 5"
+#define CPUID_EXT_MMFR2 "c1, 6"
+#define CPUID_EXT_MMFR3 "c1, 7"
+#define CPUID_EXT_ISAR0 "c2, 0"
+#define CPUID_EXT_ISAR1 "c2, 1"
+#define CPUID_EXT_ISAR2 "c2, 2"
+#define CPUID_EXT_ISAR3 "c2, 3"
+#define CPUID_EXT_ISAR4 "c2, 4"
+#define CPUID_EXT_ISAR5 "c2, 5"
+
#ifdef CONFIG_CPU_CP15
#define read_cpuid(reg) \
({ \
@@ -18,9 +33,19 @@
: "cc"); \
__val; \
})
+#define read_cpuid_ext(ext_reg) \
+ ({ \
+ unsigned int __val; \
+ asm("mrc p15, 0, %0, c0, " ext_reg \
+ : "=r" (__val) \
+ : \
+ : "cc"); \
+ __val; \
+ })
#else
extern unsigned int processor_id;
#define read_cpuid(reg) (processor_id)
+#define read_cpuid_ext(reg) 0
#endif
/*
diff --git a/arch/arm/include/asm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h
deleted file mode 100644
index e521b70..0000000
--- a/arch/arm/include/asm/hardware/arm_twd.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_HARDWARE_TWD_H
-#define __ASM_HARDWARE_TWD_H
-
-#define TWD_TIMER_LOAD 0x00
-#define TWD_TIMER_COUNTER 0x04
-#define TWD_TIMER_CONTROL 0x08
-#define TWD_TIMER_INTSTAT 0x0C
-
-#define TWD_WDOG_LOAD 0x20
-#define TWD_WDOG_COUNTER 0x24
-#define TWD_WDOG_CONTROL 0x28
-#define TWD_WDOG_INTSTAT 0x2C
-#define TWD_WDOG_RESETSTAT 0x30
-#define TWD_WDOG_DISABLE 0x34
-
-#define TWD_TIMER_CONTROL_ENABLE (1 << 0)
-#define TWD_TIMER_CONTROL_ONESHOT (0 << 1)
-#define TWD_TIMER_CONTROL_PERIODIC (1 << 1)
-#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2)
-
-#endif
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 64f2252..cdb9022 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -24,6 +24,8 @@
#define L2X0_CACHE_TYPE 0x004
#define L2X0_CTRL 0x100
#define L2X0_AUX_CTRL 0x104
+#define L2X0_TAG_LATENCY_CTRL 0x108
+#define L2X0_DATA_LATENCY_CTRL 0x10C
#define L2X0_EVENT_CNT_CTRL 0x200
#define L2X0_EVENT_CNT1_CFG 0x204
#define L2X0_EVENT_CNT0_CFG 0x208
diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
new file mode 100644
index 0000000..6a6c66b
--- /dev/null
+++ b/arch/arm/include/asm/hardware/pl080.h
@@ -0,0 +1,138 @@
+/* arch/arm/include/asm/hardware/pl080.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * ARM PrimeCell PL080 DMA controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Note, there are some Samsung updates to this controller block which
+ * make it not entierly compatible with the PL080 specification from
+ * ARM. When in doubt, check the Samsung documentation first.
+ *
+ * The Samsung defines are PL080S, and add an extra controll register,
+ * the ability to move more than 2^11 counts of data and some extra
+ * OneNAND features.
+*/
+
+#define PL080_INT_STATUS (0x00)
+#define PL080_TC_STATUS (0x04)
+#define PL080_TC_CLEAR (0x08)
+#define PL080_ERR_STATUS (0x0C)
+#define PL080_ERR_CLEAR (0x10)
+#define PL080_RAW_TC_STATUS (0x14)
+#define PL080_RAW_ERR_STATUS (0x18)
+#define PL080_EN_CHAN (0x1c)
+#define PL080_SOFT_BREQ (0x20)
+#define PL080_SOFT_SREQ (0x24)
+#define PL080_SOFT_LBREQ (0x28)
+#define PL080_SOFT_LSREQ (0x2C)
+
+#define PL080_CONFIG (0x30)
+#define PL080_CONFIG_M2_BE (1 << 2)
+#define PL080_CONFIG_M1_BE (1 << 1)
+#define PL080_CONFIG_ENABLE (1 << 0)
+
+#define PL080_SYNC (0x34)
+
+/* Per channel configuration registers */
+
+#define PL008_Cx_STRIDE (0x20)
+#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20)))
+#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20)))
+#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20)))
+#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20)))
+#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20)))
+#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20)))
+
+#define PL080_CH_SRC_ADDR (0x00)
+#define PL080_CH_DST_ADDR (0x04)
+#define PL080_CH_LLI (0x08)
+#define PL080_CH_CONTROL (0x0C)
+#define PL080_CH_CONFIG (0x10)
+#define PL080S_CH_CONTROL2 (0x10)
+#define PL080S_CH_CONFIG (0x14)
+
+#define PL080_LLI_ADDR_MASK (0x3fffffff << 2)
+#define PL080_LLI_ADDR_SHIFT (2)
+#define PL080_LLI_LM_AHB2 (1 << 0)
+
+#define PL080_CONTROL_TC_IRQ_EN (1 << 31)
+#define PL080_CONTROL_PROT_MASK (0x7 << 28)
+#define PL080_CONTROL_PROT_SHIFT (28)
+#define PL080_CONTROL_PROT_SYS (1 << 28)
+#define PL080_CONTROL_DST_INCR (1 << 27)
+#define PL080_CONTROL_SRC_INCR (1 << 26)
+#define PL080_CONTROL_DST_AHB2 (1 << 25)
+#define PL080_CONTROL_SRC_AHB2 (1 << 24)
+#define PL080_CONTROL_DWIDTH_MASK (0x7 << 21)
+#define PL080_CONTROL_DWIDTH_SHIFT (21)
+#define PL080_CONTROL_SWIDTH_MASK (0x7 << 18)
+#define PL080_CONTROL_SWIDTH_SHIFT (18)
+#define PL080_CONTROL_DB_SIZE_MASK (0x7 << 15)
+#define PL080_CONTROL_DB_SIZE_SHIFT (15)
+#define PL080_CONTROL_SB_SIZE_MASK (0x7 << 12)
+#define PL080_CONTROL_SB_SIZE_SHIFT (12)
+#define PL080_CONTROL_TRANSFER_SIZE_MASK (0xfff << 0)
+#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0)
+
+#define PL080_BSIZE_1 (0x0)
+#define PL080_BSIZE_4 (0x1)
+#define PL080_BSIZE_8 (0x2)
+#define PL080_BSIZE_16 (0x3)
+#define PL080_BSIZE_32 (0x4)
+#define PL080_BSIZE_64 (0x5)
+#define PL080_BSIZE_128 (0x6)
+#define PL080_BSIZE_256 (0x7)
+
+#define PL080_WIDTH_8BIT (0x0)
+#define PL080_WIDTH_16BIT (0x1)
+#define PL080_WIDTH_32BIT (0x2)
+
+#define PL080_CONFIG_HALT (1 << 18)
+#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */
+#define PL080_CONFIG_LOCK (1 << 16)
+#define PL080_CONFIG_TC_IRQ_MASK (1 << 15)
+#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14)
+#define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11)
+#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11)
+#define PL080_CONFIG_DST_SEL_MASK (0xf << 6)
+#define PL080_CONFIG_DST_SEL_SHIFT (6)
+#define PL080_CONFIG_SRC_SEL_MASK (0xf << 1)
+#define PL080_CONFIG_SRC_SEL_SHIFT (1)
+#define PL080_CONFIG_ENABLE (1 << 0)
+
+#define PL080_FLOW_MEM2MEM (0x0)
+#define PL080_FLOW_MEM2PER (0x1)
+#define PL080_FLOW_PER2MEM (0x2)
+#define PL080_FLOW_SRC2DST (0x3)
+#define PL080_FLOW_SRC2DST_DST (0x4)
+#define PL080_FLOW_MEM2PER_PER (0x5)
+#define PL080_FLOW_PER2MEM_PER (0x6)
+#define PL080_FLOW_SRC2DST_SRC (0x7)
+
+/* DMA linked list chain structure */
+
+struct pl080_lli {
+ u32 src_addr;
+ u32 dst_addr;
+ u32 next_lli;
+ u32 control0;
+};
+
+struct pl080s_lli {
+ u32 src_addr;
+ u32 dst_addr;
+ u32 next_lli;
+ u32 control0;
+ u32 control1;
+};
+
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index f87328d..5d72550 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -41,7 +41,7 @@
#define VIC_PL192_VECT_ADDR 0xF00
#ifndef __ASSEMBLY__
-void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
+void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
#endif
#endif
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
new file mode 100644
index 0000000..50c7e7c
--- /dev/null
+++ b/arch/arm/include/asm/localtimer.h
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/include/asm/localtimer.h
+ *
+ * Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_LOCALTIMER_H
+#define __ASM_ARM_LOCALTIMER_H
+
+struct clock_event_device;
+
+/*
+ * Setup a per-cpu timer, whether it be a local timer or dummy broadcast
+ */
+void percpu_timer_setup(void);
+
+/*
+ * Called from assembly, this is the local timer IRQ handler
+ */
+asmlinkage void do_local_timer(struct pt_regs *);
+
+
+#ifdef CONFIG_LOCAL_TIMERS
+
+#ifdef CONFIG_HAVE_ARM_TWD
+
+#include "smp_twd.h"
+
+#define local_timer_ack() twd_timer_ack()
+#define local_timer_stop() twd_timer_stop()
+
+#else
+
+/*
+ * Platform provides this to acknowledge a local timer IRQ.
+ * Returns true if the local timer IRQ is to be processed.
+ */
+int local_timer_ack(void);
+
+/*
+ * Stop a local timer interrupt.
+ */
+void local_timer_stop(void);
+
+#endif
+
+/*
+ * Setup a local timer interrupt for a CPU.
+ */
+void local_timer_setup(struct clock_event_device *);
+
+#else
+
+static inline void local_timer_stop(void)
+{
+}
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 58cf91f..742c2aaeb 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -30,6 +30,14 @@ struct map_desc {
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
+
+struct mem_type;
+extern const struct mem_type *get_mem_type(unsigned int type);
+/*
+ * external interface to remap single page with appropriate type
+ */
+extern int ioremap_page(unsigned long virt, unsigned long phys,
+ const struct mem_type *mtype);
#else
#define iotable_init(map,num) do { } while (0)
#endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 110295c..1cd2d64 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -342,7 +342,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
return __va(ptr);
}
-#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
/*
* Conversion functions: convert a page and protection to a page entry,
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 1845892..6a89567 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -71,6 +71,7 @@ struct thread_struct {
regs->ARM_cpsr = USR26_MODE; \
if (elf_hwcap & HWCAP_THUMB && pc & 1) \
regs->ARM_cpsr |= PSR_T_BIT; \
+ regs->ARM_cpsr |= PSR_ENDSTATE; \
regs->ARM_pc = pc & ~1; /* pc */ \
regs->ARM_sp = sp; /* sp */ \
regs->ARM_r2 = stack[2]; /* r2 (envp) */ \
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 236a06b..67b833c 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -50,6 +50,7 @@
#define PSR_F_BIT 0x00000040
#define PSR_I_BIT 0x00000080
#define PSR_A_BIT 0x00000100
+#define PSR_E_BIT 0x00000200
#define PSR_J_BIT 0x01000000
#define PSR_Q_BIT 0x08000000
#define PSR_V_BIT 0x10000000
@@ -65,6 +66,22 @@
#define PSR_x 0x0000ff00 /* Extension */
#define PSR_c 0x000000ff /* Control */
+/*
+ * ARMv7 groups of APSR bits
+ */
+#define PSR_ISET_MASK 0x01000010 /* ISA state (J, T) mask */
+#define PSR_IT_MASK 0x0600fc00 /* If-Then execution state mask */
+#define PSR_ENDIAN_MASK 0x00000200 /* Endianness state mask */
+
+/*
+ * Default endianness state
+ */
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define PSR_ENDSTATE PSR_E_BIT
+#else
+#define PSR_ENDSTATE 0
+#endif
+
#ifndef __ASSEMBLY__
/*
diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
index ada93a8..4fc1565 100644
--- a/arch/arm/include/asm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
@@ -29,6 +29,7 @@
#define SZ_512 0x00000200
#define SZ_1K 0x00000400
+#define SZ_2K 0x00000800
#define SZ_4K 0x00001000
#define SZ_8K 0x00002000
#define SZ_16K 0x00004000
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 5995935..a06e735 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -41,7 +41,7 @@ extern void show_ipi_list(struct seq_file *p);
asmlinkage void do_IPI(struct pt_regs *regs);
/*
- * Setup the SMP cpu_possible_map
+ * Setup the set of possible CPUs (via set_cpu_possible)
*/
extern void smp_init_cpus(void);
@@ -56,11 +56,6 @@ extern void smp_store_cpu_info(unsigned int cpuid);
extern void smp_cross_call(const struct cpumask *mask);
/*
- * Broadcast a clock event to other CPUs.
- */
-extern void smp_timer_broadcast(const struct cpumask *mask);
-
-/*
* Boot a secondary CPU, and assign it the specified idle task.
* This also gives us the initial stack to use for this CPU.
*/
@@ -101,43 +96,8 @@ extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
/*
- * Local timer interrupt handling function (can be IPI'ed).
- */
-extern void local_timer_interrupt(void);
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/*
- * Stop a local timer interrupt.
- */
-extern void local_timer_stop(void);
-
-/*
- * Platform provides this to acknowledge a local timer IRQ
- */
-extern int local_timer_ack(void);
-
-#else
-
-static inline void local_timer_stop(void)
-{
-}
-
-#endif
-
-/*
- * Setup a local timer interrupt for a CPU.
- */
-extern void local_timer_setup(void);
-
-/*
* show local interrupt info
*/
extern void show_local_irqs(struct seq_file *);
-/*
- * Called from assembly, this is the local timer IRQ handler
- */
-asmlinkage void do_local_timer(struct pt_regs *);
-
#endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h
new file mode 100644
index 0000000..2376835
--- /dev/null
+++ b/arch/arm/include/asm/smp_scu.h
@@ -0,0 +1,7 @@
+#ifndef __ASMARM_ARCH_SCU_H
+#define __ASMARM_ARCH_SCU_H
+
+unsigned int scu_get_core_count(void __iomem *);
+void scu_enable(void __iomem *);
+
+#endif
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
new file mode 100644
index 0000000..7be0978
--- /dev/null
+++ b/arch/arm/include/asm/smp_twd.h
@@ -0,0 +1,12 @@
+#ifndef __ASMARM_SMP_TWD_H
+#define __ASMARM_SMP_TWD_H
+
+struct clock_event_device;
+
+extern void __iomem *twd_base;
+
+void twd_timer_stop(void);
+int twd_timer_ack(void);
+void twd_timer_setup(struct clock_event_device *);
+
+#endif
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index a622180..c964f3f 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -40,6 +40,12 @@
#define TLB_V6_I_ASID (1 << 18)
#define TLB_BTB (1 << 28)
+
+/* Unified Inner Shareable TLB operations (ARMv7 MP extensions) */
+#define TLB_V7_UIS_PAGE (1 << 19)
+#define TLB_V7_UIS_FULL (1 << 20)
+#define TLB_V7_UIS_ASID (1 << 21)
+
#define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */
#define TLB_DCLEAN (1 << 30)
#define TLB_WB (1 << 31)
@@ -176,9 +182,17 @@
# define v6wbi_always_flags (-1UL)
#endif
+#ifdef CONFIG_SMP
+#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+ TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
+#else
+#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+ TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID)
+#endif
+
#ifdef CONFIG_CPU_TLB_V7
-# define v7wbi_possible_flags v6wbi_tlb_flags
-# define v7wbi_always_flags v6wbi_tlb_flags
+# define v7wbi_possible_flags v7wbi_tlb_flags
+# define v7wbi_always_flags v7wbi_tlb_flags
# ifdef _TLB
# define MULTI_TLB 1
# else
@@ -316,6 +330,8 @@ static inline void local_flush_tlb_all(void)
asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+ if (tlb_flag(TLB_V7_UIS_FULL))
+ asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc");
if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
@@ -351,6 +367,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
if (tlb_flag(TLB_V6_I_ASID))
asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
+ if (tlb_flag(TLB_V7_UIS_ASID))
+ asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc");
if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
@@ -389,6 +407,8 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
if (tlb_flag(TLB_V6_I_PAGE))
asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+ if (tlb_flag(TLB_V7_UIS_PAGE))
+ asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc");
if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
@@ -424,6 +444,8 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
if (tlb_flag(TLB_V6_I_PAGE))
asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
+ if (tlb_flag(TLB_V7_UIS_PAGE))
+ asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (kaddr) : "cc");
if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 7897464..0da9bc9 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -386,7 +386,9 @@ do { \
#ifdef CONFIG_MMU
extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n);
extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __must_check __copy_to_user_std(void __user *to, const void *from, unsigned long n);
extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
+extern unsigned long __must_check __clear_user_std(void __user *addr, unsigned long n);
#else
#define __copy_from_user(to,from,n) (memcpy(to, (void __force *)from, n), 0)
#define __copy_to_user(to,from,n) (memcpy((void __force *)to, from, n), 0)
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 11a5197..ff89d0b 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -22,6 +22,8 @@ obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o
+obj-$(CONFIG_HAVE_ARM_TWD) += smp_twd.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 83b1da6..fc8af43 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -482,6 +482,9 @@ __und_usr:
subeq r4, r2, #4 @ ARM instr at LR - 4
subne r4, r2, #2 @ Thumb instr at LR - 2
1: ldreqt r0, [r4]
+#ifdef CONFIG_CPU_ENDIAN_BE8
+ reveq r0, r0 @ little endian instruction
+#endif
beq call_fpe
@ Thumb instruction
#if __LINUX_ARM_ARCH__ >= 7
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index b55cb03..366e509 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -210,6 +210,9 @@ ENTRY(vector_swi)
A710( teq ip, #0x0f000000 )
A710( bne .Larm710bug )
#endif
+#ifdef CONFIG_CPU_ENDIAN_BE8
+ rev r10, r10 @ little endian instruction
+#endif
#elif defined(CONFIG_AEABI)
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index c3265a2..1585423 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -365,7 +365,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
regs.ARM_r2 = (unsigned long)fn;
regs.ARM_r3 = (unsigned long)do_exit;
regs.ARM_pc = (unsigned long)kernel_thread_helper;
- regs.ARM_cpsr = SVC_MODE;
+ regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;
return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
}
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 80b8b5c..442b874 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -426,9 +426,13 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka,
*/
thumb = handler & 1;
- if (thumb)
+ if (thumb) {
cpsr |= PSR_T_BIT;
- else
+#if __LINUX_ARM_ARCH__ >= 7
+ /* clear the If-Then Thumb-2 execution state */
+ cpsr &= ~PSR_IT_MASK;
+#endif
+ } else
cpsr &= ~PSR_T_BIT;
}
#endif
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 6014dfd..de885fd 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -22,16 +22,20 @@
#include <linux/smp.h>
#include <linux/seq_file.h>
#include <linux/irq.h>
+#include <linux/percpu.h>
+#include <linux/clockchips.h>
#include <asm/atomic.h>
#include <asm/cacheflush.h>
#include <asm/cpu.h>
+#include <asm/cputype.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/processor.h>
#include <asm/tlbflush.h>
#include <asm/ptrace.h>
+#include <asm/localtimer.h>
/*
* as from 2.5, kernels no longer have an init_tasks structure
@@ -163,7 +167,7 @@ int __cpuexit __cpu_disable(void)
* Take this CPU offline. Once we clear this, we can't return,
* and we must not schedule until we're ready to give up the cpu.
*/
- cpu_clear(cpu, cpu_online_map);
+ set_cpu_online(cpu, false);
/*
* OK - migrate IRQs away from this CPU
@@ -274,9 +278,9 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
local_fiq_enable();
/*
- * Setup local timer for this CPU.
+ * Setup the percpu timer for this CPU.
*/
- local_timer_setup();
+ percpu_timer_setup();
calibrate_delay();
@@ -285,7 +289,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
/*
* OK, now it's safe to let the boot CPU continue
*/
- cpu_set(cpu, cpu_online_map);
+ set_cpu_online(cpu, true);
/*
* OK, it's off to the idle thread for us
@@ -383,10 +387,16 @@ void show_local_irqs(struct seq_file *p)
seq_putc(p, '\n');
}
+/*
+ * Timer (local or broadcast) support
+ */
+static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent);
+
static void ipi_timer(void)
{
+ struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
irq_enter();
- local_timer_interrupt();
+ evt->event_handler(evt);
irq_exit();
}
@@ -405,6 +415,42 @@ asmlinkage void __exception do_local_timer(struct pt_regs *regs)
}
#endif
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+static void smp_timer_broadcast(const struct cpumask *mask)
+{
+ send_ipi_message(mask, IPI_TIMER);
+}
+
+static void broadcast_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+}
+
+static void local_timer_setup(struct clock_event_device *evt)
+{
+ evt->name = "dummy_timer";
+ evt->features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_DUMMY;
+ evt->rating = 400;
+ evt->mult = 1;
+ evt->set_mode = broadcast_timer_set_mode;
+ evt->broadcast = smp_timer_broadcast;
+
+ clockevents_register_device(evt);
+}
+#endif
+
+void __cpuinit percpu_timer_setup(void)
+{
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
+
+ evt->cpumask = cpumask_of(cpu);
+
+ local_timer_setup(evt);
+}
+
static DEFINE_SPINLOCK(stop_lock);
/*
@@ -417,7 +463,7 @@ static void ipi_cpu_stop(unsigned int cpu)
dump_stack();
spin_unlock(&stop_lock);
- cpu_clear(cpu, cpu_online_map);
+ set_cpu_online(cpu, false);
local_fiq_disable();
local_irq_disable();
@@ -501,11 +547,6 @@ void smp_send_reschedule(int cpu)
send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
}
-void smp_timer_broadcast(const struct cpumask *mask)
-{
- send_ipi_message(mask, IPI_TIMER);
-}
-
void smp_send_stop(void)
{
cpumask_t mask = cpu_online_map;
@@ -545,6 +586,12 @@ struct tlb_args {
unsigned long ta_end;
};
+/* all SMP configurations have the extended CPUID registers */
+static inline int tlb_ops_need_broadcast(void)
+{
+ return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
+}
+
static inline void ipi_flush_tlb_all(void *ignored)
{
local_flush_tlb_all();
@@ -587,51 +634,61 @@ static inline void ipi_flush_tlb_kernel_range(void *arg)
void flush_tlb_all(void)
{
- on_each_cpu(ipi_flush_tlb_all, NULL, 1);
+ if (tlb_ops_need_broadcast())
+ on_each_cpu(ipi_flush_tlb_all, NULL, 1);
+ else
+ local_flush_tlb_all();
}
void flush_tlb_mm(struct mm_struct *mm)
{
- on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
+ if (tlb_ops_need_broadcast())
+ on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
+ else
+ local_flush_tlb_mm(mm);
}
void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
{
- struct tlb_args ta;
-
- ta.ta_vma = vma;
- ta.ta_start = uaddr;
-
- on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+ if (tlb_ops_need_broadcast()) {
+ struct tlb_args ta;
+ ta.ta_vma = vma;
+ ta.ta_start = uaddr;
+ on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+ } else
+ local_flush_tlb_page(vma, uaddr);
}
void flush_tlb_kernel_page(unsigned long kaddr)
{
- struct tlb_args ta;
-
- ta.ta_start = kaddr;
-
- on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
+ if (tlb_ops_need_broadcast()) {
+ struct tlb_args ta;
+ ta.ta_start = kaddr;
+ on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
+ } else
+ local_flush_tlb_kernel_page(kaddr);
}
void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
- struct tlb_args ta;
-
- ta.ta_vma = vma;
- ta.ta_start = start;
- ta.ta_end = end;
-
- on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+ if (tlb_ops_need_broadcast()) {
+ struct tlb_args ta;
+ ta.ta_vma = vma;
+ ta.ta_start = start;
+ ta.ta_end = end;
+ on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+ } else
+ local_flush_tlb_range(vma, start, end);
}
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
- struct tlb_args ta;
-
- ta.ta_start = start;
- ta.ta_end = end;
-
- on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
+ if (tlb_ops_need_broadcast()) {
+ struct tlb_args ta;
+ ta.ta_start = start;
+ ta.ta_end = end;
+ on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
+ } else
+ local_flush_tlb_kernel_range(start, end);
}
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
new file mode 100644
index 0000000..d3831f6
--- /dev/null
+++ b/arch/arm/kernel/smp_scu.c
@@ -0,0 +1,48 @@
+/*
+ * linux/arch/arm/kernel/smp_scu.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/smp_scu.h>
+#include <asm/cacheflush.h>
+
+#define SCU_CTRL 0x00
+#define SCU_CONFIG 0x04
+#define SCU_CPU_STATUS 0x08
+#define SCU_INVALIDATE 0x0c
+#define SCU_FPGA_REVISION 0x10
+
+/*
+ * Get the number of CPU cores from the SCU configuration
+ */
+unsigned int __init scu_get_core_count(void __iomem *scu_base)
+{
+ unsigned int ncores = __raw_readl(scu_base + SCU_CONFIG);
+ return (ncores & 0x03) + 1;
+}
+
+/*
+ * Enable the SCU
+ */
+void __init scu_enable(void __iomem *scu_base)
+{
+ u32 scu_ctrl;
+
+ scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
+ scu_ctrl |= 1;
+ __raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+
+ /*
+ * Ensure that the data accessed by CPU0 before the SCU was
+ * initialised is visible to the other CPUs.
+ */
+ flush_cache_all();
+}
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
new file mode 100644
index 0000000..d8c88c6
--- /dev/null
+++ b/arch/arm/kernel/smp_twd.c
@@ -0,0 +1,175 @@
+/*
+ * linux/arch/arm/kernel/smp_twd.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/jiffies.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/smp_twd.h>
+#include <asm/hardware/gic.h>
+
+#define TWD_TIMER_LOAD 0x00
+#define TWD_TIMER_COUNTER 0x04
+#define TWD_TIMER_CONTROL 0x08
+#define TWD_TIMER_INTSTAT 0x0C
+
+#define TWD_WDOG_LOAD 0x20
+#define TWD_WDOG_COUNTER 0x24
+#define TWD_WDOG_CONTROL 0x28
+#define TWD_WDOG_INTSTAT 0x2C
+#define TWD_WDOG_RESETSTAT 0x30
+#define TWD_WDOG_DISABLE 0x34
+
+#define TWD_TIMER_CONTROL_ENABLE (1 << 0)
+#define TWD_TIMER_CONTROL_ONESHOT (0 << 1)
+#define TWD_TIMER_CONTROL_PERIODIC (1 << 1)
+#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2)
+
+/* set up by the platform code */
+void __iomem *twd_base;
+
+static unsigned long twd_timer_rate;
+
+static void twd_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ unsigned long ctrl;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ /* timer load already set up */
+ ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
+ | TWD_TIMER_CONTROL_PERIODIC;
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* period set, and timer enabled in 'next_event' hook */
+ ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ ctrl = 0;
+ }
+
+ __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+}
+
+static int twd_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
+
+ ctrl |= TWD_TIMER_CONTROL_ENABLE;
+
+ __raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
+ __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+
+ return 0;
+}
+
+/*
+ * local_timer_ack: checks for a local timer interrupt.
+ *
+ * If a local timer interrupt has occurred, acknowledge and return 1.
+ * Otherwise, return 0.
+ */
+int twd_timer_ack(void)
+{
+ if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
+ __raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
+ return 1;
+ }
+
+ return 0;
+}
+
+static void __cpuinit twd_calibrate_rate(void)
+{
+ unsigned long load, count;
+ u64 waitjiffies;
+
+ /*
+ * If this is the first time round, we need to work out how fast
+ * the timer ticks
+ */
+ if (twd_timer_rate == 0) {
+ printk(KERN_INFO "Calibrating local timer... ");
+
+ /* Wait for a tick to start */
+ waitjiffies = get_jiffies_64() + 1;
+
+ while (get_jiffies_64() < waitjiffies)
+ udelay(10);
+
+ /* OK, now the tick has started, let's get the timer going */
+ waitjiffies += 5;
+
+ /* enable, no interrupt or reload */
+ __raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
+
+ /* maximum value */
+ __raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
+
+ while (get_jiffies_64() < waitjiffies)
+ udelay(10);
+
+ count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
+
+ twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
+
+ printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
+ (twd_timer_rate / 100000) % 100);
+ }
+
+ load = twd_timer_rate / HZ;
+
+ __raw_writel(load, twd_base + TWD_TIMER_LOAD);
+}
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit twd_timer_setup(struct clock_event_device *clk)
+{
+ unsigned long flags;
+
+ twd_calibrate_rate();
+
+ clk->name = "local_timer";
+ clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ clk->rating = 350;
+ clk->set_mode = twd_set_mode;
+ clk->set_next_event = twd_set_next_event;
+ clk->shift = 20;
+ clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift);
+ clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
+ clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
+
+ /* Make sure our local interrupt controller has this enabled */
+ local_irq_save(flags);
+ get_irq_chip(clk->irq)->unmask(clk->irq);
+ local_irq_restore(flags);
+
+ clockevents_register_device(clk);
+}
+
+/*
+ * take a local timer down
+ */
+void __cpuexit twd_timer_stop(void)
+{
+ __raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index c90f272..6c07797 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -141,6 +141,7 @@ SECTIONS
.data : AT(__data_loc) {
_data = .; /* address in memory */
+ _sdata = .;
/*
* first, the init task union, aligned
@@ -192,6 +193,7 @@ SECTIONS
__bss_start = .; /* BSS */
*(.bss)
*(COMMON)
+ __bss_stop = .;
_end = .;
}
/* Stabs debugging sections. */
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 866f84a..030ba72 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -29,6 +29,9 @@ else
endif
endif
+# using lib_ here won't override already available weak symbols
+obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o
+
lib-$(CONFIG_MMU) += $(mmu-y)
ifeq ($(CONFIG_CPU_32v3),y)
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index 4d6bc71..844f567 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -18,7 +18,8 @@
* : sz - number of bytes to clear
* Returns : number of bytes NOT cleared
*/
-ENTRY(__clear_user)
+ENTRY(__clear_user_std)
+WEAK(__clear_user)
stmfd sp!, {r1, lr}
mov r2, #0
cmp r1, #4
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 22f968b..878820f 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -86,7 +86,8 @@
.text
-ENTRY(__copy_to_user)
+ENTRY(__copy_to_user_std)
+WEAK(__copy_to_user)
#include "copy_template.S"
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
new file mode 100644
index 0000000..6b967ff
--- /dev/null
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -0,0 +1,228 @@
+/*
+ * linux/arch/arm/lib/uaccess_with_memcpy.c
+ *
+ * Written by: Lennert Buytenhek and Nicolas Pitre
+ * Copyright (C) 2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/uaccess.h>
+#include <linux/rwsem.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/hardirq.h> /* for in_atomic() */
+#include <asm/current.h>
+#include <asm/page.h>
+
+static int
+pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
+{
+ unsigned long addr = (unsigned long)_addr;
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ spinlock_t *ptl;
+
+ pgd = pgd_offset(current->mm, addr);
+ if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd)))
+ return 0;
+
+ pmd = pmd_offset(pgd, addr);
+ if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd)))
+ return 0;
+
+ pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl);
+ if (unlikely(!pte_present(*pte) || !pte_young(*pte) ||
+ !pte_write(*pte) || !pte_dirty(*pte))) {
+ pte_unmap_unlock(pte, ptl);
+ return 0;
+ }
+
+ *ptep = pte;
+ *ptlp = ptl;
+
+ return 1;
+}
+
+static unsigned long noinline
+__copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
+{
+ int atomic;
+
+ if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
+ memcpy((void *)to, from, n);
+ return 0;
+ }
+
+ /* the mmap semaphore is taken only if not in an atomic context */
+ atomic = in_atomic();
+
+ if (!atomic)
+ down_read(&current->mm->mmap_sem);
+ while (n) {
+ pte_t *pte;
+ spinlock_t *ptl;
+ int tocopy;
+
+ while (!pin_page_for_write(to, &pte, &ptl)) {
+ if (!atomic)
+ up_read(&current->mm->mmap_sem);
+ if (__put_user(0, (char __user *)to))
+ goto out;
+ if (!atomic)
+ down_read(&current->mm->mmap_sem);
+ }
+
+ tocopy = (~(unsigned long)to & ~PAGE_MASK) + 1;
+ if (tocopy > n)
+ tocopy = n;
+
+ memcpy((void *)to, from, tocopy);
+ to += tocopy;
+ from += tocopy;
+ n -= tocopy;
+
+ pte_unmap_unlock(pte, ptl);
+ }
+ if (!atomic)
+ up_read(&current->mm->mmap_sem);
+
+out:
+ return n;
+}
+
+unsigned long
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ /*
+ * This test is stubbed out of the main function above to keep
+ * the overhead for small copies low by avoiding a large
+ * register dump on the stack just to reload them right away.
+ * With frame pointer disabled, tail call optimization kicks in
+ * as well making this test almost invisible.
+ */
+ if (n < 64)
+ return __copy_to_user_std(to, from, n);
+ return __copy_to_user_memcpy(to, from, n);
+}
+
+static unsigned long noinline
+__clear_user_memset(void __user *addr, unsigned long n)
+{
+ if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
+ memset((void *)addr, 0, n);
+ return 0;
+ }
+
+ down_read(&current->mm->mmap_sem);
+ while (n) {
+ pte_t *pte;
+ spinlock_t *ptl;
+ int tocopy;
+
+ while (!pin_page_for_write(addr, &pte, &ptl)) {
+ up_read(&current->mm->mmap_sem);
+ if (__put_user(0, (char __user *)addr))
+ goto out;
+ down_read(&current->mm->mmap_sem);
+ }
+
+ tocopy = (~(unsigned long)addr & ~PAGE_MASK) + 1;
+ if (tocopy > n)
+ tocopy = n;
+
+ memset((void *)addr, 0, tocopy);
+ addr += tocopy;
+ n -= tocopy;
+
+ pte_unmap_unlock(pte, ptl);
+ }
+ up_read(&current->mm->mmap_sem);
+
+out:
+ return n;
+}
+
+unsigned long __clear_user(void __user *addr, unsigned long n)
+{
+ /* See rational for this in __copy_to_user() above. */
+ if (n < 64)
+ return __clear_user_std(addr, n);
+ return __clear_user_memset(addr, n);
+}
+
+#if 0
+
+/*
+ * This code is disabled by default, but kept around in case the chosen
+ * thresholds need to be revalidated. Some overhead (small but still)
+ * would be implied by a runtime determined variable threshold, and
+ * so far the measurement on concerned targets didn't show a worthwhile
+ * variation.
+ *
+ * Note that a fairly precise sched_clock() implementation is needed
+ * for results to make some sense.
+ */
+
+#include <linux/vmalloc.h>
+
+static int __init test_size_treshold(void)
+{
+ struct page *src_page, *dst_page;
+ void *user_ptr, *kernel_ptr;
+ unsigned long long t0, t1, t2;
+ int size, ret;
+
+ ret = -ENOMEM;
+ src_page = alloc_page(GFP_KERNEL);
+ if (!src_page)
+ goto no_src;
+ dst_page = alloc_page(GFP_KERNEL);
+ if (!dst_page)
+ goto no_dst;
+ kernel_ptr = page_address(src_page);
+ user_ptr = vmap(&dst_page, 1, VM_IOREMAP, __pgprot(__P010));
+ if (!user_ptr)
+ goto no_vmap;
+
+ /* warm up the src page dcache */
+ ret = __copy_to_user_memcpy(user_ptr, kernel_ptr, PAGE_SIZE);
+
+ for (size = PAGE_SIZE; size >= 4; size /= 2) {
+ t0 = sched_clock();
+ ret |= __copy_to_user_memcpy(user_ptr, kernel_ptr, size);
+ t1 = sched_clock();
+ ret |= __copy_to_user_std(user_ptr, kernel_ptr, size);
+ t2 = sched_clock();
+ printk("copy_to_user: %d %llu %llu\n", size, t1 - t0, t2 - t1);
+ }
+
+ for (size = PAGE_SIZE; size >= 4; size /= 2) {
+ t0 = sched_clock();
+ ret |= __clear_user_memset(user_ptr, size);
+ t1 = sched_clock();
+ ret |= __clear_user_std(user_ptr, size);
+ t2 = sched_clock();
+ printk("clear_user: %d %llu %llu\n", size, t1 - t0, t2 - t1);
+ }
+
+ if (ret)
+ ret = -EFAULT;
+
+ vunmap(user_ptr);
+no_vmap:
+ put_page(dst_page);
+no_dst:
+ put_page(src_page);
+no_src:
+ return ret;
+}
+
+subsys_initcall(test_size_treshold);
+
+#endif
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index e263fda..970fd6b 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -156,6 +156,8 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
* MCI (SD/MMC)
*/
static struct at91_mmc_data __initdata afeb9260_mmc_data = {
+ .det_pin = AT91_PIN_PC9,
+ .wp_pin = AT91_PIN_PC4,
.slot_b = 1,
.wire4 = 1,
};
@@ -164,6 +166,8 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = {
static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
{
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ }, {
I2C_BOARD_INFO("fm3130", 0x68),
}, {
I2C_BOARD_INFO("24c64", 0x50),
@@ -196,6 +200,8 @@ static void __init afeb9260_board_init(void)
/* I2C */
at91_add_device_i2c(afeb9260_i2c_devices,
ARRAY_SIZE(afeb9260_i2c_devices));
+ /* Audio */
+ at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
}
MACHINE_START(AFEB9260, "Custom afeb9260 board")
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 438efbb..cc270be 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -218,6 +218,13 @@ static struct gpio_led ek_leds[] = {
}
};
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("24c512", 0x50),
+ },
+};
+
+
static void __init ek_board_init(void)
{
/* Serial */
@@ -235,7 +242,7 @@ static void __init ek_board_init(void)
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* PCK0 provides MCLK to the WM8731 */
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index e434510..bac578f 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -43,6 +43,25 @@
#define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM)
+/*
+ * Chips have some kind of clocks : group them by functionality
+ */
+#define cpu_has_utmi() ( cpu_is_at91cap9() \
+ || cpu_is_at91sam9rl())
+
+#define cpu_has_800M_plla() (cpu_is_at91sam9g20())
+
+#define cpu_has_pllb() (!cpu_is_at91sam9rl())
+
+#define cpu_has_upll() (0)
+
+/* USB host HS & FS */
+#define cpu_has_uhp() (!cpu_is_at91sam9rl())
+
+/* USB device FS only */
+#define cpu_has_udpfs() (!cpu_is_at91sam9rl())
+
+
static LIST_HEAD(clocks);
static DEFINE_SPINLOCK(clk_lock);
@@ -140,7 +159,7 @@ static struct clk utmi_clk = {
};
static struct clk uhpck = {
.name = "uhpck",
- .parent = &pllb,
+ /*.parent = ... we choose parent at runtime */
.mode = pmc_sys_mode,
};
@@ -173,7 +192,11 @@ static struct clk __init *at91_css_to_clk(unsigned long css)
case AT91_PMC_CSS_PLLA:
return &plla;
case AT91_PMC_CSS_PLLB:
- return &pllb;
+ if (cpu_has_upll())
+ /* CSS_PLLB == CSS_UPLL */
+ return &utmi_clk;
+ else if (cpu_has_pllb())
+ return &pllb;
}
return NULL;
@@ -322,7 +345,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
u32 pckr;
pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
- pckr &= AT91_PMC_CSS_PLLB; /* clock selection */
+ pckr &= AT91_PMC_CSS; /* clock selection */
pckr |= prescale << 2;
at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
clk->rate_hz = actual;
@@ -361,7 +384,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
}
EXPORT_SYMBOL(clk_set_parent);
-/* establish PCK0..PCK3 parentage and rate */
+/* establish PCK0..PCKN parentage and rate */
static void __init init_programmable_clock(struct clk *clk)
{
struct clk *parent;
@@ -389,11 +412,13 @@ static int at91_clk_show(struct seq_file *s, void *unused)
seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR));
seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
- if (!cpu_is_at91sam9rl())
+ if (cpu_has_pllb())
seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
- if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+ if (cpu_has_utmi())
seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
+ if (cpu_has_upll())
+ seq_printf(s, "USB = %8x\n", at91_sys_read(AT91_PMC_USB));
seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
seq_printf(s, "\n");
@@ -554,16 +579,60 @@ static struct clk *const standard_pmc_clocks[] __initdata = {
&clk32k,
&main_clk,
&plla,
- &pllb,
-
- /* PLLB children (USB) */
- &udpck,
- &uhpck,
/* MCK */
&mck
};
+/* PLLB generated USB full speed clock init */
+static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
+{
+ /*
+ * USB clock init: choose 48 MHz PLLB value,
+ * disable 48MHz clock during usb peripheral suspend.
+ *
+ * REVISIT: assumes MCK doesn't derive from PLLB!
+ */
+ uhpck.parent = &pllb;
+
+ at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
+ pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
+ if (cpu_is_at91rm9200()) {
+ uhpck.pmc_mask = AT91RM9200_PMC_UHP;
+ udpck.pmc_mask = AT91RM9200_PMC_UDP;
+ at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+ uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+ udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+ } else if (cpu_is_at91cap9()) {
+ uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+ }
+ at91_sys_write(AT91_CKGR_PLLBR, 0);
+
+ udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+ uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+}
+
+/* UPLL generated USB full speed clock init */
+static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
+{
+ /*
+ * USB clock init: choose 480 MHz from UPLL,
+ */
+ unsigned int usbr = AT91_PMC_USBS_UPLL;
+
+ /* Setup divider by 10 to reach 48 MHz */
+ usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV;
+
+ at91_sys_write(AT91_PMC_USB, usbr);
+
+ /* Now set uhpck values */
+ uhpck.parent = &utmi_clk;
+ uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+ uhpck.rate_hz = utmi_clk.parent->rate_hz;
+ uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
+}
+
int __init at91_clock_init(unsigned long main_clock)
{
unsigned tmp, freq, mckr;
@@ -585,43 +654,37 @@ int __init at91_clock_init(unsigned long main_clock)
/* report if PLLA is more than mildly overclocked */
plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
- if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000)
- || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000))
+ if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
+ || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
- /*
- * USB clock init: choose 48 MHz PLLB value,
- * disable 48MHz clock during usb peripheral suspend.
- *
- * REVISIT: assumes MCK doesn't derive from PLLB!
- */
- at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
- pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
- if (cpu_is_at91rm9200()) {
- uhpck.pmc_mask = AT91RM9200_PMC_UHP;
- udpck.pmc_mask = AT91RM9200_PMC_UDP;
- at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
- } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
- uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
- udpck.pmc_mask = AT91SAM926x_PMC_UDP;
- } else if (cpu_is_at91cap9()) {
- uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+
+ if (cpu_has_upll() && !cpu_has_pllb()) {
+ /* setup UTMI clock as the fourth primary clock
+ * (instead of pllb) */
+ utmi_clk.type |= CLK_TYPE_PRIMARY;
+ utmi_clk.id = 3;
}
- at91_sys_write(AT91_CKGR_PLLBR, 0);
- udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
- uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
/*
* USB HS clock init
*/
- if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) {
+ if (cpu_has_utmi())
/*
* multiplier is hard-wired to 40
* (obtain the USB High Speed 480 MHz when input is 12 MHz)
*/
utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
- }
+
+ /*
+ * USB FS clock init
+ */
+ if (cpu_has_pllb())
+ at91_pllb_usbfs_clock_init(main_clock);
+ if (cpu_has_upll())
+ /* assumes that we choose UPLL for USB and not PLLA */
+ at91_upll_usbfs_clock_init(main_clock);
/*
* MCK and CPU derive from one of those primary clocks.
@@ -631,21 +694,31 @@ int __init at91_clock_init(unsigned long main_clock)
mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
freq = mck.parent->rate_hz;
freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); /* prescale */
- if (cpu_is_at91rm9200())
+ if (cpu_is_at91rm9200()) {
mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
- else if (cpu_is_at91sam9g20()) {
+ } else if (cpu_is_at91sam9g20()) {
mck.rate_hz = (mckr & AT91_PMC_MDIV) ?
freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */
if (mckr & AT91_PMC_PDIV)
freq /= 2; /* processor clock division */
- } else
+ } else {
mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
+ }
/* Register the PMC's standard clocks */
for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
- if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+ if (cpu_has_pllb())
+ list_add_tail(&pllb.node, &clocks);
+
+ if (cpu_has_uhp())
+ list_add_tail(&uhpck.node, &clocks);
+
+ if (cpu_has_udpfs())
+ list_add_tail(&udpck.node, &clocks);
+
+ if (cpu_has_utmi())
list_add_tail(&utmi_clk.node, &clocks);
/* MCK and CPU clock are "always on" */
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 9561e33..64589ea 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -23,7 +23,7 @@
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [AT91CAP9 revC only] */
+#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [CAP9 revC & some SAM9 only] */
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
@@ -39,11 +39,11 @@
#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */
#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
-#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
+#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */
#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
@@ -72,6 +72,7 @@
#define AT91_PMC_CSS_MAIN (1 << 0)
#define AT91_PMC_CSS_PLLA (2 << 0)
#define AT91_PMC_CSS_PLLB (3 << 0)
+#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */
#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
#define AT91_PMC_PRES_1 (0 << 2)
#define AT91_PMC_PRES_2 (1 << 2)
@@ -88,12 +89,25 @@
#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
#define AT91SAM9_PMC_MDIV_2 (1 << 8)
#define AT91SAM9_PMC_MDIV_4 (2 << 8)
-#define AT91SAM9_PMC_MDIV_6 (3 << 8)
+#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */
+#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */
#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */
#define AT91_PMC_PDIV_1 (0 << 12)
#define AT91_PMC_PDIV_2 (1 << 12)
+#define AT91_PMC_PLLADIV2 (1 << 12) /* PLLA divisor by 2 [some SAM9 only] */
+#define AT91_PMC_PLLADIV2_OFF (0 << 12)
+#define AT91_PMC_PLLADIV2_ON (1 << 12)
-#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
+#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register [some SAM9 only] */
+#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */
+#define AT91_PMC_USBS_PLLA (0 << 0)
+#define AT91_PMC_USBS_UPLL (1 << 0)
+#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */
+
+#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */
+#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */
+#define AT91_PMC_CSSMCK_CSS (0 << 8)
+#define AT91_PMC_CSSMCK_MCK (1 << 8)
#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
@@ -102,7 +116,7 @@
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
-#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */
+#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */
#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index a9c78bc..be747f5 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -1,11 +1,26 @@
if ARCH_DAVINCI
+config AINTC
+ bool
+
+config CP_INTC
+ bool
+
menu "TI DaVinci Implementations"
comment "DaVinci Core Type"
config ARCH_DAVINCI_DM644x
bool "DaVinci 644x based system"
+ select AINTC
+
+config ARCH_DAVINCI_DM355
+ bool "DaVinci 355 based system"
+ select AINTC
+
+config ARCH_DAVINCI_DM646x
+ bool "DaVinci 646x based system"
+ select AINTC
comment "DaVinci Board Type"
@@ -17,6 +32,34 @@ config MACH_DAVINCI_EVM
Configure this option to specify the whether the board used
for development is a DM644x EVM
+config MACH_SFFSDR
+ bool "Lyrtech SFFSDR"
+ depends on ARCH_DAVINCI_DM644x
+ help
+ Say Y here to select the Lyrtech Small Form Factor
+ Software Defined Radio (SFFSDR) board.
+
+config MACH_DAVINCI_DM355_EVM
+ bool "TI DM355 EVM"
+ depends on ARCH_DAVINCI_DM355
+ help
+ Configure this option to specify the whether the board used
+ for development is a DM355 EVM
+
+config MACH_DM355_LEOPARD
+ bool "DM355 Leopard board"
+ depends on ARCH_DAVINCI_DM355
+ help
+ Configure this option to specify the whether the board used
+ for development is a DM355 Leopard board.
+
+config MACH_DAVINCI_DM6467_EVM
+ bool "TI DM6467 EVM"
+ depends on ARCH_DAVINCI_DM646x
+ help
+ Configure this option to specify the whether the board used
+ for development is a DM6467 EVM
+
config DAVINCI_MUX
bool "DAVINCI multiplexing support"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 1674661..059ab78 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -4,13 +4,22 @@
#
# Common objects
-obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \
- gpio.o devices.o dma.o usb.o
+obj-y := time.o clock.o serial.o io.o psc.o \
+ gpio.o devices.o dma.o usb.o common.o sram.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o
# Chip specific
obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o
+obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o
+obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o
+
+obj-$(CONFIG_AINTC) += irq.o
+obj-$(CONFIG_CP_INTC) += cp_intc.o
# Board specific
obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o
+obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o
+obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o
+obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o
+obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
new file mode 100644
index 0000000..5ac2f56
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -0,0 +1,298 @@
+/*
+ * TI DaVinci EVM board support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/common.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+
+/* NOTE: this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+ {
+ /* UBL (a few copies) plus U-Boot */
+ .name = "bootloader",
+ .offset = 0,
+ .size = 15 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ /* U-Boot environment */
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1 * NAND_BLOCK_SIZE,
+ .mask_flags = 0,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_512M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem2",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+ /* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+ .mask_chipsel = BIT(14),
+ .parts = davinci_nand_partitions,
+ .nr_parts = ARRAY_SIZE(davinci_nand_partitions),
+ .ecc_mode = NAND_ECC_HW_SYNDROME,
+ .options = NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_nand_device = {
+ .name = "davinci_nand",
+ .id = 0,
+
+ .num_resources = ARRAY_SIZE(davinci_nand_resources),
+ .resource = davinci_nand_resources,
+
+ .dev = {
+ .platform_data = &davinci_nand_data,
+ },
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 400 /* kHz */,
+ .bus_delay = 0 /* usec */,
+};
+
+static int dm355evm_mmc_gpios = -EINVAL;
+
+static void dm355evm_mmcsd_gpios(unsigned gpio)
+{
+ gpio_request(gpio + 0, "mmc0_ro");
+ gpio_request(gpio + 1, "mmc0_cd");
+ gpio_request(gpio + 2, "mmc1_ro");
+ gpio_request(gpio + 3, "mmc1_cd");
+
+ /* we "know" these are input-only so we don't
+ * need to call gpio_direction_input()
+ */
+
+ dm355evm_mmc_gpios = gpio;
+}
+
+static struct i2c_board_info dm355evm_i2c_info[] = {
+ { I2C_BOARD_INFO("dm355evm_msp", 0x25),
+ .platform_data = dm355evm_mmcsd_gpios,
+ /* plus irq */ },
+ /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+ /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init evm_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+
+ gpio_request(5, "dm355evm_msp");
+ gpio_direction_input(5);
+ dm355evm_i2c_info[0].irq = gpio_to_irq(5);
+
+ i2c_register_board_info(1, dm355evm_i2c_info,
+ ARRAY_SIZE(dm355evm_i2c_info));
+}
+
+static struct resource dm355evm_dm9000_rsrc[] = {
+ {
+ /* addr */
+ .start = 0x04014000,
+ .end = 0x04014001,
+ .flags = IORESOURCE_MEM,
+ }, {
+ /* data */
+ .start = 0x04014002,
+ .end = 0x04014003,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ
+ | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+ },
+};
+
+static struct platform_device dm355evm_dm9000 = {
+ .name = "dm9000",
+ .id = -1,
+ .resource = dm355evm_dm9000_rsrc,
+ .num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_evm_devices[] __initdata = {
+ &dm355evm_dm9000,
+ &davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_evm_map_io(void)
+{
+ dm355_init();
+}
+
+static int dm355evm_mmc_get_cd(int module)
+{
+ if (!gpio_is_valid(dm355evm_mmc_gpios))
+ return -ENXIO;
+ /* low == card present */
+ return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1);
+}
+
+static int dm355evm_mmc_get_ro(int module)
+{
+ if (!gpio_is_valid(dm355evm_mmc_gpios))
+ return -ENXIO;
+ /* high == card's write protect switch active */
+ return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355evm_mmc_config = {
+ .get_cd = dm355evm_mmc_get_cd,
+ .get_ro = dm355evm_mmc_get_ro,
+ .wires = 4,
+ .max_freq = 50000000,
+ .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+ .version = MMC_CTLR_VERSION_1,
+};
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender. If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE 0 /* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE 1 /* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+ .byte_len = SZ_64K / 8,
+ .name = "at25640a",
+ .page_size = 32,
+ .flags = EE_ADDR2,
+};
+
+static struct spi_board_info dm355_evm_spi_info[] __initconst = {
+ {
+ .modalias = "at25",
+ .platform_data = &at25640a,
+ .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ },
+};
+
+static __init void dm355_evm_init(void)
+{
+ struct clk *aemif;
+
+ gpio_request(1, "dm9000");
+ gpio_direction_input(1);
+ dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
+
+ aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
+ if (IS_ERR(aemif))
+ WARN("%s: unable to get AEMIF clock\n", __func__);
+ else
+ clk_enable(aemif);
+
+ platform_add_devices(davinci_evm_devices,
+ ARRAY_SIZE(davinci_evm_devices));
+ evm_init_i2c();
+ davinci_serial_init(&uart_config);
+
+ /* NOTE: NAND flash timings set by the UBL are slower than
+ * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+ * but could be 0x0400008c for about 25% faster page reads.
+ */
+
+ gpio_request(2, "usb_id_toggle");
+ gpio_direction_output(2, USB_ID_VALUE);
+ /* irlml6401 switches over 1A in under 8 msec */
+ setup_usb(500, 8);
+
+ davinci_setup_mmc(0, &dm355evm_mmc_config);
+ davinci_setup_mmc(1, &dm355evm_mmc_config);
+
+ dm355_init_spi0(BIT(0), dm355_evm_spi_info,
+ ARRAY_SIZE(dm355_evm_spi_info));
+}
+
+static __init void dm355_evm_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (0x80000100),
+ .map_io = dm355_evm_map_io,
+ .init_irq = dm355_evm_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = dm355_evm_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
new file mode 100644
index 0000000..28c9008
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -0,0 +1,296 @@
+/*
+ * DM355 leopard board support
+ *
+ * Based on board-dm355-evm.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/common.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+
+/* NOTE: this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+ {
+ /* UBL (a few copies) plus U-Boot */
+ .name = "bootloader",
+ .offset = 0,
+ .size = 15 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ /* U-Boot environment */
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1 * NAND_BLOCK_SIZE,
+ .mask_flags = 0,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_512M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem2",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+ /* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+ .mask_chipsel = BIT(14),
+ .parts = davinci_nand_partitions,
+ .nr_parts = ARRAY_SIZE(davinci_nand_partitions),
+ .ecc_mode = NAND_ECC_HW_SYNDROME,
+ .options = NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_nand_device = {
+ .name = "davinci_nand",
+ .id = 0,
+
+ .num_resources = ARRAY_SIZE(davinci_nand_resources),
+ .resource = davinci_nand_resources,
+
+ .dev = {
+ .platform_data = &davinci_nand_data,
+ },
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 400 /* kHz */,
+ .bus_delay = 0 /* usec */,
+};
+
+static int leopard_mmc_gpio = -EINVAL;
+
+static void dm355leopard_mmcsd_gpios(unsigned gpio)
+{
+ gpio_request(gpio + 0, "mmc0_ro");
+ gpio_request(gpio + 1, "mmc0_cd");
+ gpio_request(gpio + 2, "mmc1_ro");
+ gpio_request(gpio + 3, "mmc1_cd");
+
+ /* we "know" these are input-only so we don't
+ * need to call gpio_direction_input()
+ */
+
+ leopard_mmc_gpio = gpio;
+}
+
+static struct i2c_board_info dm355leopard_i2c_info[] = {
+ { I2C_BOARD_INFO("dm355leopard_msp", 0x25),
+ .platform_data = dm355leopard_mmcsd_gpios,
+ /* plus irq */ },
+ /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+ /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init leopard_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+
+ gpio_request(5, "dm355leopard_msp");
+ gpio_direction_input(5);
+ dm355leopard_i2c_info[0].irq = gpio_to_irq(5);
+
+ i2c_register_board_info(1, dm355leopard_i2c_info,
+ ARRAY_SIZE(dm355leopard_i2c_info));
+}
+
+static struct resource dm355leopard_dm9000_rsrc[] = {
+ {
+ /* addr */
+ .start = 0x04000000,
+ .end = 0x04000001,
+ .flags = IORESOURCE_MEM,
+ }, {
+ /* data */
+ .start = 0x04000016,
+ .end = 0x04000017,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ
+ | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+ },
+};
+
+static struct platform_device dm355leopard_dm9000 = {
+ .name = "dm9000",
+ .id = -1,
+ .resource = dm355leopard_dm9000_rsrc,
+ .num_resources = ARRAY_SIZE(dm355leopard_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_leopard_devices[] __initdata = {
+ &dm355leopard_dm9000,
+ &davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_leopard_map_io(void)
+{
+ dm355_init();
+}
+
+static int dm355leopard_mmc_get_cd(int module)
+{
+ if (!gpio_is_valid(leopard_mmc_gpio))
+ return -ENXIO;
+ /* low == card present */
+ return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1);
+}
+
+static int dm355leopard_mmc_get_ro(int module)
+{
+ if (!gpio_is_valid(leopard_mmc_gpio))
+ return -ENXIO;
+ /* high == card's write protect switch active */
+ return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355leopard_mmc_config = {
+ .get_cd = dm355leopard_mmc_get_cd,
+ .get_ro = dm355leopard_mmc_get_ro,
+ .wires = 4,
+ .max_freq = 50000000,
+ .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+};
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender. If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE 0 /* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE 1 /* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+ .byte_len = SZ_64K / 8,
+ .name = "at25640a",
+ .page_size = 32,
+ .flags = EE_ADDR2,
+};
+
+static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
+ {
+ .modalias = "at25",
+ .platform_data = &at25640a,
+ .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ },
+};
+
+static __init void dm355_leopard_init(void)
+{
+ struct clk *aemif;
+
+ gpio_request(9, "dm9000");
+ gpio_direction_input(9);
+ dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
+
+ aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
+ if (IS_ERR(aemif))
+ WARN("%s: unable to get AEMIF clock\n", __func__);
+ else
+ clk_enable(aemif);
+
+ platform_add_devices(davinci_leopard_devices,
+ ARRAY_SIZE(davinci_leopard_devices));
+ leopard_init_i2c();
+ davinci_serial_init(&uart_config);
+
+ /* NOTE: NAND flash timings set by the UBL are slower than
+ * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+ * but could be 0x0400008c for about 25% faster page reads.
+ */
+
+ gpio_request(2, "usb_id_toggle");
+ gpio_direction_output(2, USB_ID_VALUE);
+ /* irlml6401 switches over 1A in under 8 msec */
+ setup_usb(500, 8);
+
+ davinci_setup_mmc(0, &dm355leopard_mmc_config);
+ davinci_setup_mmc(1, &dm355leopard_mmc_config);
+
+ dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
+ ARRAY_SIZE(dm355_leopard_spi_info));
+}
+
+static __init void dm355_leopard_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (0x80000100),
+ .map_io = dm355_leopard_map_io,
+ .init_irq = dm355_leopard_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = dm355_leopard_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index b2e7f9c..d9d4045 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -16,12 +16,11 @@
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/memory.h>
-#include <linux/etherdevice.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/i2c/at24.h>
-
+#include <linux/etherdevice.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
@@ -44,6 +43,9 @@
#include <mach/mux.h>
#include <mach/psc.h>
#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/emac.h>
+#include <mach/common.h>
#define DM644X_EVM_PHY_MASK (0x2)
#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
@@ -436,45 +438,15 @@ static struct pcf857x_platform_data pcf_data_u35 = {
* - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
* - ... newer boards may have more
*/
-static struct memory_accessor *at24_mem_acc;
-
-static void at24_setup(struct memory_accessor *mem_acc, void *context)
-{
- DECLARE_MAC_BUF(mac_str);
- char mac_addr[6];
-
- at24_mem_acc = mem_acc;
-
- /* Read MAC addr from EEPROM */
- if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
- printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
- print_mac(mac_str, mac_addr));
- }
-}
static struct at24_platform_data eeprom_info = {
.byte_len = (256*1024) / 8,
.page_size = 64,
.flags = AT24_FLAG_ADDR16,
- .setup = at24_setup,
+ .setup = davinci_get_mac_addr,
+ .context = (void *)0x7f00,
};
-int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
-{
- if (at24_mem_acc)
- return at24_mem_acc->read(at24_mem_acc, buf, off, count);
- return -ENODEV;
-}
-EXPORT_SYMBOL(dm6446evm_eeprom_read);
-
-int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
-{
- if (at24_mem_acc)
- return at24_mem_acc->write(at24_mem_acc, buf, off, count);
- return -ENODEV;
-}
-EXPORT_SYMBOL(dm6446evm_eeprom_write);
-
/*
* MSP430 supports RTC, card detection, input from IR remote, and
* a bit more. It triggers interrupts on GPIO(7) from pressing
@@ -545,6 +517,27 @@ static int dm6444evm_msp430_get_pins(void)
return (buf[3] << 8) | buf[2];
}
+static int dm6444evm_mmc_get_cd(int module)
+{
+ int status = dm6444evm_msp430_get_pins();
+
+ return (status < 0) ? status : !(status & BIT(1));
+}
+
+static int dm6444evm_mmc_get_ro(int module)
+{
+ int status = dm6444evm_msp430_get_pins();
+
+ return (status < 0) ? status : status & BIT(6 + 8);
+}
+
+static struct davinci_mmc_config dm6446evm_mmc_config = {
+ .get_cd = dm6444evm_mmc_get_cd,
+ .get_ro = dm6444evm_mmc_get_ro,
+ .wires = 4,
+ .version = MMC_CTLR_VERSION_1
+};
+
static struct i2c_board_info __initdata i2c_info[] = {
{
I2C_BOARD_INFO("dm6446evm_msp", 0x23),
@@ -598,7 +591,6 @@ static struct davinci_uart_config uart_config __initdata = {
static void __init
davinci_evm_map_io(void)
{
- davinci_map_common_io();
dm644x_init();
}
@@ -639,6 +631,7 @@ static int davinci_phy_fixup(struct phy_device *phydev)
static __init void davinci_evm_init(void)
{
struct clk *aemif_clk;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
aemif_clk = clk_get(NULL, "aemif");
clk_enable(aemif_clk);
@@ -671,8 +664,13 @@ static __init void davinci_evm_init(void)
ARRAY_SIZE(davinci_evm_devices));
evm_init_i2c();
+ davinci_setup_mmc(0, &dm6446evm_mmc_config);
+
davinci_serial_init(&uart_config);
+ soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK;
+ soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY;
+
/* Register the fixup for PHY on DaVinci */
phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
davinci_phy_fixup);
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
new file mode 100644
index 0000000..e17de63
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -0,0 +1,262 @@
+/*
+ * TI DaVinci DM646X EVM board
+ *
+ * Derived from: arch/arm/mach-davinci/board-evm.c
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * (C) 2007-2008, MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/major.h>
+#include <linux/root_dev.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/etherdevice.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm646x.h>
+#include <mach/common.h>
+#include <mach/psc.h>
+#include <mach/serial.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/emac.h>
+#include <mach/common.h>
+
+#define DM646X_EVM_PHY_MASK (0x2)
+#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+/* LEDS */
+
+static struct gpio_led evm_leds[] = {
+ { .name = "DS1", .active_low = 1, },
+ { .name = "DS2", .active_low = 1, },
+ { .name = "DS3", .active_low = 1, },
+ { .name = "DS4", .active_low = 1, },
+};
+
+static __initconst struct gpio_led_platform_data evm_led_data = {
+ .num_leds = ARRAY_SIZE(evm_leds),
+ .leds = evm_leds,
+};
+
+static struct platform_device *evm_led_dev;
+
+static int evm_led_setup(struct i2c_client *client, int gpio,
+ unsigned int ngpio, void *c)
+{
+ struct gpio_led *leds = evm_leds;
+ int status;
+
+ while (ngpio--) {
+ leds->gpio = gpio++;
+ leds++;
+ };
+
+ evm_led_dev = platform_device_alloc("leds-gpio", 0);
+ platform_device_add_data(evm_led_dev, &evm_led_data,
+ sizeof(evm_led_data));
+
+ evm_led_dev->dev.parent = &client->dev;
+ status = platform_device_add(evm_led_dev);
+ if (status < 0) {
+ platform_device_put(evm_led_dev);
+ evm_led_dev = NULL;
+ }
+ return status;
+}
+
+static int evm_led_teardown(struct i2c_client *client, int gpio,
+ unsigned ngpio, void *c)
+{
+ if (evm_led_dev) {
+ platform_device_unregister(evm_led_dev);
+ evm_led_dev = NULL;
+ }
+ return 0;
+}
+
+static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
+
+static int evm_sw_setup(struct i2c_client *client, int gpio,
+ unsigned ngpio, void *c)
+{
+ int status;
+ int i;
+ char label[10];
+
+ for (i = 0; i < 4; ++i) {
+ snprintf(label, 10, "user_sw%d", i);
+ status = gpio_request(gpio, label);
+ if (status)
+ goto out_free;
+ evm_sw_gpio[i] = gpio++;
+
+ status = gpio_direction_input(evm_sw_gpio[i]);
+ if (status) {
+ gpio_free(evm_sw_gpio[i]);
+ evm_sw_gpio[i] = -EINVAL;
+ goto out_free;
+ }
+
+ status = gpio_export(evm_sw_gpio[i], 0);
+ if (status) {
+ gpio_free(evm_sw_gpio[i]);
+ evm_sw_gpio[i] = -EINVAL;
+ goto out_free;
+ }
+ }
+ return status;
+out_free:
+ for (i = 0; i < 4; ++i) {
+ if (evm_sw_gpio[i] != -EINVAL) {
+ gpio_free(evm_sw_gpio[i]);
+ evm_sw_gpio[i] = -EINVAL;
+ }
+ }
+ return status;
+}
+
+static int evm_sw_teardown(struct i2c_client *client, int gpio,
+ unsigned ngpio, void *c)
+{
+ int i;
+
+ for (i = 0; i < 4; ++i) {
+ if (evm_sw_gpio[i] != -EINVAL) {
+ gpio_unexport(evm_sw_gpio[i]);
+ gpio_free(evm_sw_gpio[i]);
+ evm_sw_gpio[i] = -EINVAL;
+ }
+ }
+ return 0;
+}
+
+static int evm_pcf_setup(struct i2c_client *client, int gpio,
+ unsigned int ngpio, void *c)
+{
+ int status;
+
+ if (ngpio < 8)
+ return -EINVAL;
+
+ status = evm_sw_setup(client, gpio, 4, c);
+ if (status)
+ return status;
+
+ return evm_led_setup(client, gpio+4, 4, c);
+}
+
+static int evm_pcf_teardown(struct i2c_client *client, int gpio,
+ unsigned int ngpio, void *c)
+{
+ BUG_ON(ngpio < 8);
+
+ evm_sw_teardown(client, gpio, 4, c);
+ evm_led_teardown(client, gpio+4, 4, c);
+
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data = {
+ .gpio_base = DAVINCI_N_GPIO+1,
+ .setup = evm_pcf_setup,
+ .teardown = evm_pcf_teardown,
+};
+
+/* Most of this EEPROM is unused, but U-Boot uses some data:
+ * - 0x7f00, 6 bytes Ethernet Address
+ * - ... newer boards may have more
+ */
+
+static struct at24_platform_data eeprom_info = {
+ .byte_len = (256*1024) / 8,
+ .page_size = 64,
+ .flags = AT24_FLAG_ADDR16,
+ .setup = davinci_get_mac_addr,
+ .context = (void *)0x7f00,
+};
+
+static struct i2c_board_info __initdata i2c_info[] = {
+ {
+ I2C_BOARD_INFO("24c256", 0x50),
+ .platform_data = &eeprom_info,
+ },
+ {
+ I2C_BOARD_INFO("pcf8574a", 0x38),
+ .platform_data = &pcf_data,
+ },
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 100 /* kHz */,
+ .bus_delay = 0 /* usec */,
+};
+
+static void __init evm_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+ i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static void __init davinci_map_io(void)
+{
+ dm646x_init();
+}
+
+static __init void evm_init(void)
+{
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ evm_init_i2c();
+ davinci_serial_init(&uart_config);
+
+ soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
+ soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
+}
+
+static __init void davinci_dm646x_evm_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (0x80000100),
+ .map_io = davinci_map_io,
+ .init_irq = davinci_dm646x_evm_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = evm_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
new file mode 100644
index 0000000..748a8e4
--- /dev/null
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -0,0 +1,189 @@
+/*
+ * Lyrtech SFFSDR board support.
+ *
+ * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * Based on DV-EVM platform, original copyright follows:
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/etherdevice.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm644x.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/common.h>
+
+#define SFFSDR_PHY_MASK (0x2)
+#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+
+struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
+ /* U-Boot Environment: Block 0
+ * UBL: Block 1
+ * U-Boot: Blocks 6-7 (256 kb)
+ * Integrity Kernel: Blocks 8-31 (3 Mb)
+ * Integrity Data: Blocks 100-END
+ */
+ {
+ .name = "Linux Kernel",
+ .offset = 32 * SZ_128K,
+ .size = 16 * SZ_128K, /* 2 Mb */
+ .mask_flags = MTD_WRITEABLE, /* Force read-only */
+ },
+ {
+ .name = "Linux ROOT",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 256 * SZ_128K, /* 32 Mb */
+ .mask_flags = 0, /* R/W */
+ },
+};
+
+static struct flash_platform_data davinci_sffsdr_nandflash_data = {
+ .parts = davinci_sffsdr_nandflash_partition,
+ .nr_parts = ARRAY_SIZE(davinci_sffsdr_nandflash_partition),
+};
+
+static struct resource davinci_sffsdr_nandflash_resource[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_sffsdr_nandflash_device = {
+ .name = "davinci_nand", /* Name of driver */
+ .id = 0,
+ .dev = {
+ .platform_data = &davinci_sffsdr_nandflash_data,
+ },
+ .num_resources = ARRAY_SIZE(davinci_sffsdr_nandflash_resource),
+ .resource = davinci_sffsdr_nandflash_resource,
+};
+
+static struct emac_platform_data sffsdr_emac_pdata = {
+ .phy_mask = SFFSDR_PHY_MASK,
+ .mdio_max_freq = SFFSDR_MDIO_FREQUENCY,
+};
+
+static struct at24_platform_data eeprom_info = {
+ .byte_len = (64*1024) / 8,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info __initdata i2c_info[] = {
+ {
+ I2C_BOARD_INFO("24lc64", 0x50),
+ .platform_data = &eeprom_info,
+ },
+ /* Other I2C devices:
+ * MSP430, addr 0x23 (not used)
+ * PCA9543, addr 0x70 (setup done by U-Boot)
+ * ADS7828, addr 0x48 (ADC for voltage monitoring.)
+ */
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 20 /* kHz */,
+ .bus_delay = 100 /* usec */,
+};
+
+static void __init sffsdr_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+ i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static struct platform_device *davinci_sffsdr_devices[] __initdata = {
+ &davinci_sffsdr_nandflash_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+static void __init davinci_sffsdr_map_io(void)
+{
+ dm644x_init();
+}
+
+static __init void davinci_sffsdr_init(void)
+{
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ platform_add_devices(davinci_sffsdr_devices,
+ ARRAY_SIZE(davinci_sffsdr_devices));
+ sffsdr_init_i2c();
+ davinci_serial_init(&uart_config);
+ soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
+ soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
+ setup_usb(0, 0); /* We support only peripheral mode. */
+
+ /* mux VLYNQ pins */
+ davinci_cfg_reg(DM644X_VLYNQEN);
+ davinci_cfg_reg(DM644X_VLYNQWD);
+}
+
+static __init void davinci_sffsdr_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
+ /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .map_io = davinci_sffsdr_map_io,
+ .init_irq = davinci_sffsdr_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = davinci_sffsdr_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index f0baaa1..39bf321 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -42,7 +42,8 @@ static void __clk_enable(struct clk *clk)
if (clk->parent)
__clk_enable(clk->parent);
if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
- davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
+ davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
+ clk->lpsc, 1);
}
static void __clk_disable(struct clk *clk)
@@ -50,7 +51,8 @@ static void __clk_disable(struct clk *clk)
if (WARN_ON(clk->usecount == 0))
return;
if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
- davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
+ davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
+ clk->lpsc, 0);
if (clk->parent)
__clk_disable(clk->parent);
}
@@ -164,11 +166,11 @@ static int __init clk_disable_unused(void)
continue;
/* ignore if in Disabled or SwRstDisable states */
- if (!davinci_psc_is_clk_active(ck->lpsc))
+ if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc))
continue;
pr_info("Clocks: disable unused %s\n", ck->name);
- davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
+ davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0);
}
spin_unlock_irq(&clockfw_lock);
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 35736ec..27233cb 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -67,6 +67,7 @@ struct clk {
u8 usecount;
u8 flags;
u8 lpsc;
+ u8 psc_ctlr;
struct clk *parent;
struct pll_data *pll_data;
u32 div_reg;
@@ -93,4 +94,7 @@ struct davinci_clk {
}
int davinci_clk_init(struct davinci_clk *clocks);
+
+extern struct platform_device davinci_wdt_device;
+
#endif
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
new file mode 100644
index 0000000..61ede19
--- /dev/null
+++ b/arch/arm/mach-davinci/common.c
@@ -0,0 +1,108 @@
+/*
+ * Code commons to all DaVinci SoCs.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/etherdevice.h>
+
+#include <asm/tlb.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/cputype.h>
+#include <mach/emac.h>
+
+#include "clock.h"
+
+struct davinci_soc_info davinci_soc_info;
+EXPORT_SYMBOL(davinci_soc_info);
+
+void __iomem *davinci_intc_base;
+int davinci_intc_type;
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context)
+{
+ char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
+ off_t offset = (off_t)context;
+
+ /* Read MAC addr from EEPROM */
+ if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+ pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
+}
+
+static struct davinci_id * __init davinci_get_id(u32 jtag_id)
+{
+ int i;
+ struct davinci_id *dip;
+ u8 variant = (jtag_id & 0xf0000000) >> 28;
+ u16 part_no = (jtag_id & 0x0ffff000) >> 12;
+
+ for (i = 0, dip = davinci_soc_info.ids; i < davinci_soc_info.ids_num;
+ i++, dip++)
+ /* Don't care about the manufacturer right now */
+ if ((dip->part_no == part_no) && (dip->variant == variant))
+ return dip;
+
+ return NULL;
+}
+
+void __init davinci_common_init(struct davinci_soc_info *soc_info)
+{
+ int ret;
+ struct davinci_id *dip;
+
+ if (!soc_info) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ memcpy(&davinci_soc_info, soc_info, sizeof(struct davinci_soc_info));
+
+ if (davinci_soc_info.io_desc && (davinci_soc_info.io_desc_num > 0))
+ iotable_init(davinci_soc_info.io_desc,
+ davinci_soc_info.io_desc_num);
+
+ /*
+ * Normally devicemaps_init() would flush caches and tlb after
+ * mdesc->map_io(), but we must also do it here because of the CPU
+ * revision check below.
+ */
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /*
+ * We want to check CPU revision early for cpu_is_xxxx() macros.
+ * IO space mapping must be initialized before we can do that.
+ */
+ davinci_soc_info.jtag_id = __raw_readl(davinci_soc_info.jtag_id_base);
+
+ dip = davinci_get_id(davinci_soc_info.jtag_id);
+ if (!dip) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ davinci_soc_info.cpu_id = dip->cpu_id;
+ pr_info("DaVinci %s variant 0x%x\n", dip->name, dip->variant);
+
+ if (davinci_soc_info.cpu_clks) {
+ ret = davinci_clk_init(davinci_soc_info.cpu_clks);
+
+ if (ret != 0)
+ goto err;
+ }
+
+ davinci_intc_base = davinci_soc_info.intc_base;
+ davinci_intc_type = davinci_soc_info.intc_type;
+ return;
+
+err:
+ pr_err("davinci_common_init: SoC Initialization failed\n");
+}
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
new file mode 100644
index 0000000..96c8e97
--- /dev/null
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -0,0 +1,161 @@
+/*
+ * TI Common Platform Interrupt Controller (cp_intc) driver
+ *
+ * Author: Steve Chen <schen@mvista.com>
+ * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/cp_intc.h>
+
+static void __iomem *cp_intc_base;
+
+static inline unsigned int cp_intc_read(unsigned offset)
+{
+ return __raw_readl(cp_intc_base + offset);
+}
+
+static inline void cp_intc_write(unsigned long value, unsigned offset)
+{
+ __raw_writel(value, cp_intc_base + offset);
+}
+
+static void cp_intc_ack_irq(unsigned int irq)
+{
+ cp_intc_write(irq, CP_INTC_SYS_STAT_IDX_CLR);
+}
+
+/* Disable interrupt */
+static void cp_intc_mask_irq(unsigned int irq)
+{
+ /* XXX don't know why we need to disable nIRQ here... */
+ cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR);
+ cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_CLR);
+ cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
+}
+
+/* Enable interrupt */
+static void cp_intc_unmask_irq(unsigned int irq)
+{
+ cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_SET);
+}
+
+static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type)
+{
+ unsigned reg = BIT_WORD(irq);
+ unsigned mask = BIT_MASK(irq);
+ unsigned polarity = cp_intc_read(CP_INTC_SYS_POLARITY(reg));
+ unsigned type = cp_intc_read(CP_INTC_SYS_TYPE(reg));
+
+ switch (flow_type) {
+ case IRQ_TYPE_EDGE_RISING:
+ polarity |= mask;
+ type |= mask;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ polarity &= ~mask;
+ type |= mask;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ polarity |= mask;
+ type &= ~mask;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ polarity &= ~mask;
+ type &= ~mask;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg));
+ cp_intc_write(type, CP_INTC_SYS_TYPE(reg));
+
+ return 0;
+}
+
+static struct irq_chip cp_intc_irq_chip = {
+ .name = "cp_intc",
+ .ack = cp_intc_ack_irq,
+ .mask = cp_intc_mask_irq,
+ .unmask = cp_intc_unmask_irq,
+ .set_type = cp_intc_set_irq_type,
+};
+
+void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
+ u8 *irq_prio)
+{
+ unsigned num_reg = BITS_TO_LONGS(num_irq);
+ int i;
+
+ cp_intc_base = base;
+
+ cp_intc_write(0, CP_INTC_GLOBAL_ENABLE);
+
+ /* Disable all host interrupts */
+ cp_intc_write(0, CP_INTC_HOST_ENABLE(0));
+
+ /* Disable system interrupts */
+ for (i = 0; i < num_reg; i++)
+ cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i));
+
+ /* Set to normal mode, no nesting, no priority hold */
+ cp_intc_write(0, CP_INTC_CTRL);
+ cp_intc_write(0, CP_INTC_HOST_CTRL);
+
+ /* Clear system interrupt status */
+ for (i = 0; i < num_reg; i++)
+ cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i));
+
+ /* Enable nIRQ (what about nFIQ?) */
+ cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
+
+ /*
+ * Priority is determined by host channel: lower channel number has
+ * higher priority i.e. channel 0 has highest priority and channel 31
+ * had the lowest priority.
+ */
+ num_reg = (num_irq + 3) >> 2; /* 4 channels per register */
+ if (irq_prio) {
+ unsigned j, k;
+ u32 val;
+
+ for (k = i = 0; i < num_reg; i++) {
+ for (val = j = 0; j < 4; j++, k++) {
+ val >>= 8;
+ if (k < num_irq)
+ val |= irq_prio[k] << 24;
+ }
+
+ cp_intc_write(val, CP_INTC_CHAN_MAP(i));
+ }
+ } else {
+ /*
+ * Default everything to channel 15 if priority not specified.
+ * Note that channel 0-1 are mapped to nFIQ and channels 2-31
+ * are mapped to nIRQ.
+ */
+ for (i = 0; i < num_reg; i++)
+ cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i));
+ }
+
+ /* Set up genirq dispatching for cp_intc */
+ for (i = 0; i < num_irq; i++) {
+ set_irq_chip(i, &cp_intc_irq_chip);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ set_irq_handler(i, handle_edge_irq);
+ }
+
+ /* Enable global interrupt */
+ cp_intc_write(1, CP_INTC_GLOBAL_ENABLE);
+}
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index a31370b..de16f34 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -23,8 +23,14 @@
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/mux.h>
+#include <mach/edma.h>
+#include <mach/mmc.h>
+#include <mach/time.h>
#define DAVINCI_I2C_BASE 0x01C21000
+#define DAVINCI_MMCSD0_BASE 0x01E10000
+#define DM355_MMCSD0_BASE 0x01E11000
+#define DM355_MMCSD1_BASE 0x01E00000
static struct resource i2c_resources[] = {
{
@@ -54,3 +60,208 @@ void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
(void) platform_device_register(&davinci_i2c_device);
}
+#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
+
+static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource mmcsd0_resources[] = {
+ {
+ /* different on dm355 */
+ .start = DAVINCI_MMCSD0_BASE,
+ .end = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /* IRQs: MMC/SD, then SDIO */
+ {
+ .start = IRQ_MMCINT,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ /* different on dm355 */
+ .start = IRQ_SDIOINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* DMA channels: RX, then TX */
+ {
+ .start = DAVINCI_DMA_MMCRXEVT,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .start = DAVINCI_DMA_MMCTXEVT,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device davinci_mmcsd0_device = {
+ .name = "davinci_mmc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &mmcsd0_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(mmcsd0_resources),
+ .resource = mmcsd0_resources,
+};
+
+static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource mmcsd1_resources[] = {
+ {
+ .start = DM355_MMCSD1_BASE,
+ .end = DM355_MMCSD1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /* IRQs: MMC/SD, then SDIO */
+ {
+ .start = IRQ_DM355_MMCINT1,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = IRQ_DM355_SDIOINT1,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* DMA channels: RX, then TX */
+ {
+ .start = 30, /* rx */
+ .flags = IORESOURCE_DMA,
+ }, {
+ .start = 31, /* tx */
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device davinci_mmcsd1_device = {
+ .name = "davinci_mmc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &mmcsd1_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(mmcsd1_resources),
+ .resource = mmcsd1_resources,
+};
+
+
+void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
+{
+ struct platform_device *pdev = NULL;
+
+ if (WARN_ON(cpu_is_davinci_dm646x()))
+ return;
+
+ /* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
+ * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
+ *
+ * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
+ * not handled right here ...
+ */
+ switch (module) {
+ case 1:
+ if (!cpu_is_davinci_dm355())
+ break;
+
+ /* REVISIT we may not need all these pins if e.g. this
+ * is a hard-wired SDIO device...
+ */
+ davinci_cfg_reg(DM355_SD1_CMD);
+ davinci_cfg_reg(DM355_SD1_CLK);
+ davinci_cfg_reg(DM355_SD1_DATA0);
+ davinci_cfg_reg(DM355_SD1_DATA1);
+ davinci_cfg_reg(DM355_SD1_DATA2);
+ davinci_cfg_reg(DM355_SD1_DATA3);
+
+ pdev = &davinci_mmcsd1_device;
+ break;
+ case 0:
+ if (cpu_is_davinci_dm355()) {
+ mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
+ mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
+ mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0;
+
+ /* expose all 6 MMC0 signals: CLK, CMD, DATA[0..3] */
+ davinci_cfg_reg(DM355_MMCSD0);
+
+ /* enable RX EDMA */
+ davinci_cfg_reg(DM355_EVT26_MMC0_RX);
+ }
+
+ else if (cpu_is_davinci_dm644x()) {
+ /* REVISIT: should this be in board-init code? */
+ void __iomem *base =
+ IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+
+ /* Power-on 3.3V IO cells */
+ __raw_writel(0, base + DM64XX_VDD3P3V_PWDN);
+ /*Set up the pull regiter for MMC */
+ davinci_cfg_reg(DM644X_MSTK);
+ }
+
+ pdev = &davinci_mmcsd0_device;
+ break;
+ }
+
+ if (WARN_ON(!pdev))
+ return;
+
+ pdev->dev.platform_data = config;
+ platform_device_register(pdev);
+}
+
+#else
+
+void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
+{
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static struct resource wdt_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device davinci_wdt_device = {
+ .name = "watchdog",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(wdt_resources),
+ .resource = wdt_resources,
+};
+
+static void davinci_init_wdt(void)
+{
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ wdt_resources[0].start = (resource_size_t)soc_info->wdt_base;
+ wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1;
+
+ platform_device_register(&davinci_wdt_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
+struct davinci_timer_instance davinci_timer_instance[2] = {
+ {
+ .base = IO_ADDRESS(DAVINCI_TIMER0_BASE),
+ .bottom_irq = IRQ_TINT0_TINT12,
+ .top_irq = IRQ_TINT0_TINT34,
+ },
+ {
+ .base = IO_ADDRESS(DAVINCI_TIMER1_BASE),
+ .bottom_irq = IRQ_TINT1_TINT12,
+ .top_irq = IRQ_TINT1_TINT34,
+ },
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init davinci_init_devices(void)
+{
+ /* please keep these calls, and their implementations above,
+ * in alphabetical order so they're easier to sort through.
+ */
+ davinci_init_wdt();
+
+ return 0;
+}
+arch_initcall(davinci_init_devices);
+
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
new file mode 100644
index 0000000..baaaf32
--- /dev/null
+++ b/arch/arm/mach-davinci/dm355.c
@@ -0,0 +1,730 @@
+/*
+ * TI DaVinci DM355 chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <linux/spi/spi.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm355.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DM355_UART2_BASE (IO_PHYS + 0x206000)
+
+/*
+ * Device specific clocks
+ */
+#define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */
+
+static struct pll_data pll1_data = {
+ .num = 1,
+ .phys_base = DAVINCI_PLL1_BASE,
+ .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct pll_data pll2_data = {
+ .num = 2,
+ .phys_base = DAVINCI_PLL2_BASE,
+ .flags = PLL_HAS_PREDIV,
+};
+
+static struct clk ref_clk = {
+ .name = "ref_clk",
+ /* FIXME -- crystal rate is board-specific */
+ .rate = DM355_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+ .name = "pll1",
+ .parent = &ref_clk,
+ .flags = CLK_PLL,
+ .pll_data = &pll1_data,
+};
+
+static struct clk pll1_aux_clk = {
+ .name = "pll1_aux_clk",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+ .name = "pll1_sysclk1",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+ .name = "pll1_sysclk2",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+ .name = "pll1_sysclk3",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+ .name = "pll1_sysclk4",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclkbp = {
+ .name = "pll1_sysclkbp",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk vpss_dac_clk = {
+ .name = "vpss_dac",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM355_LPSC_VPSS_DAC,
+};
+
+static struct clk vpss_master_clk = {
+ .name = "vpss_master",
+ .parent = &pll1_sysclk4,
+ .lpsc = DAVINCI_LPSC_VPSSMSTR,
+ .flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+ .name = "vpss_slave",
+ .parent = &pll1_sysclk4,
+ .lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+
+static struct clk clkout1_clk = {
+ .name = "clkout1",
+ .parent = &pll1_aux_clk,
+ /* NOTE: clkout1 can be externally gated by muxing GPIO-18 */
+};
+
+static struct clk clkout2_clk = {
+ .name = "clkout2",
+ .parent = &pll1_sysclkbp,
+};
+
+static struct clk pll2_clk = {
+ .name = "pll2",
+ .parent = &ref_clk,
+ .flags = CLK_PLL,
+ .pll_data = &pll2_data,
+};
+
+static struct clk pll2_sysclk1 = {
+ .name = "pll2_sysclk1",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclkbp = {
+ .name = "pll2_sysclkbp",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk clkout3_clk = {
+ .name = "clkout3",
+ .parent = &pll2_sysclkbp,
+ /* NOTE: clkout3 can be externally gated by muxing GPIO-16 */
+};
+
+static struct clk arm_clk = {
+ .name = "arm_clk",
+ .parent = &pll1_sysclk1,
+ .lpsc = DAVINCI_LPSC_ARM,
+ .flags = ALWAYS_ENABLED,
+};
+
+/*
+ * NOT LISTED below, and not touched by Linux
+ * - in SyncReset state by default
+ * .lpsc = DAVINCI_LPSC_TPCC,
+ * .lpsc = DAVINCI_LPSC_TPTC0,
+ * .lpsc = DAVINCI_LPSC_TPTC1,
+ * .lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk,
+ * .lpsc = DAVINCI_LPSC_MEMSTICK,
+ * - in Enabled state by default
+ * .lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS,
+ * .lpsc = DAVINCI_LPSC_SCR2, // "bus"
+ * .lpsc = DAVINCI_LPSC_SCR3, // "bus"
+ * .lpsc = DAVINCI_LPSC_SCR4, // "bus"
+ * .lpsc = DAVINCI_LPSC_CROSSBAR, // "emulation"
+ * .lpsc = DAVINCI_LPSC_CFG27, // "test"
+ * .lpsc = DAVINCI_LPSC_CFG3, // "test"
+ * .lpsc = DAVINCI_LPSC_CFG5, // "test"
+ */
+
+static struct clk mjcp_clk = {
+ .name = "mjcp",
+ .parent = &pll1_sysclk1,
+ .lpsc = DAVINCI_LPSC_IMCOP,
+};
+
+static struct clk uart0_clk = {
+ .name = "uart0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+ .name = "uart1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+ .name = "uart2",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+ .name = "i2c",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk asp0_clk = {
+ .name = "asp0",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk asp1_clk = {
+ .name = "asp1",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM355_LPSC_McBSP1,
+};
+
+static struct clk mmcsd0_clk = {
+ .name = "mmcsd0",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk mmcsd1_clk = {
+ .name = "mmcsd1",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM355_LPSC_MMC_SD1,
+};
+
+static struct clk spi0_clk = {
+ .name = "spi0",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk spi1_clk = {
+ .name = "spi1",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM355_LPSC_SPI1,
+};
+
+static struct clk spi2_clk = {
+ .name = "spi2",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM355_LPSC_SPI2,
+};
+
+static struct clk gpio_clk = {
+ .name = "gpio",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+ .name = "aemif",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+ .name = "pwm0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+ .name = "pwm1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+ .name = "pwm2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk pwm3_clk = {
+ .name = "pwm3",
+ .parent = &pll1_aux_clk,
+ .lpsc = DM355_LPSC_PWM3,
+};
+
+static struct clk timer0_clk = {
+ .name = "timer0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+ .name = "timer1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+ .name = "timer2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER2,
+ .usecount = 1, /* REVISIT: why cant' this be disabled? */
+};
+
+static struct clk timer3_clk = {
+ .name = "timer3",
+ .parent = &pll1_aux_clk,
+ .lpsc = DM355_LPSC_TIMER3,
+};
+
+static struct clk rto_clk = {
+ .name = "rto",
+ .parent = &pll1_aux_clk,
+ .lpsc = DM355_LPSC_RTO,
+};
+
+static struct clk usb_clk = {
+ .name = "usb",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct davinci_clk dm355_clks[] = {
+ CLK(NULL, "ref", &ref_clk),
+ CLK(NULL, "pll1", &pll1_clk),
+ CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+ CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+ CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+ CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
+ CLK(NULL, "pll1_aux", &pll1_aux_clk),
+ CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+ CLK(NULL, "vpss_dac", &vpss_dac_clk),
+ CLK(NULL, "vpss_master", &vpss_master_clk),
+ CLK(NULL, "vpss_slave", &vpss_slave_clk),
+ CLK(NULL, "clkout1", &clkout1_clk),
+ CLK(NULL, "clkout2", &clkout2_clk),
+ CLK(NULL, "pll2", &pll2_clk),
+ CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+ CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+ CLK(NULL, "clkout3", &clkout3_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "mjcp", &mjcp_clk),
+ CLK(NULL, "uart0", &uart0_clk),
+ CLK(NULL, "uart1", &uart1_clk),
+ CLK(NULL, "uart2", &uart2_clk),
+ CLK("i2c_davinci.1", NULL, &i2c_clk),
+ CLK("soc-audio.0", NULL, &asp0_clk),
+ CLK("soc-audio.1", NULL, &asp1_clk),
+ CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
+ CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
+ CLK(NULL, "spi0", &spi0_clk),
+ CLK(NULL, "spi1", &spi1_clk),
+ CLK(NULL, "spi2", &spi2_clk),
+ CLK(NULL, "gpio", &gpio_clk),
+ CLK(NULL, "aemif", &aemif_clk),
+ CLK(NULL, "pwm0", &pwm0_clk),
+ CLK(NULL, "pwm1", &pwm1_clk),
+ CLK(NULL, "pwm2", &pwm2_clk),
+ CLK(NULL, "pwm3", &pwm3_clk),
+ CLK(NULL, "timer0", &timer0_clk),
+ CLK(NULL, "timer1", &timer1_clk),
+ CLK("watchdog", NULL, &timer2_clk),
+ CLK(NULL, "timer3", &timer3_clk),
+ CLK(NULL, "rto", &rto_clk),
+ CLK(NULL, "usb", &usb_clk),
+ CLK(NULL, NULL, NULL),
+};
+
+/*----------------------------------------------------------------------*/
+
+static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource dm355_spi0_resources[] = {
+ {
+ .start = 0x01c66000,
+ .end = 0x01c667ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_DM355_SPINT0_1,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* Not yet used, so not included:
+ * IORESOURCE_IRQ:
+ * - IRQ_DM355_SPINT0_0
+ * IORESOURCE_DMA:
+ * - DAVINCI_DMA_SPI_SPIX
+ * - DAVINCI_DMA_SPI_SPIR
+ */
+};
+
+static struct platform_device dm355_spi0_device = {
+ .name = "spi_davinci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dm355_spi0_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(dm355_spi0_resources),
+ .resource = dm355_spi0_resources,
+};
+
+void __init dm355_init_spi0(unsigned chipselect_mask,
+ struct spi_board_info *info, unsigned len)
+{
+ /* for now, assume we need MISO */
+ davinci_cfg_reg(DM355_SPI0_SDI);
+
+ /* not all slaves will be wired up */
+ if (chipselect_mask & BIT(0))
+ davinci_cfg_reg(DM355_SPI0_SDENA0);
+ if (chipselect_mask & BIT(1))
+ davinci_cfg_reg(DM355_SPI0_SDENA1);
+
+ spi_register_board_info(info, len);
+
+ platform_device_register(&dm355_spi0_device);
+}
+
+/*----------------------------------------------------------------------*/
+
+#define PINMUX0 0x00
+#define PINMUX1 0x04
+#define PINMUX2 0x08
+#define PINMUX3 0x0c
+#define PINMUX4 0x10
+#define INTMUX 0x18
+#define EVTMUX 0x1c
+
+/*
+ * Device specific mux setup
+ *
+ * soc description mux mode mode mux dbg
+ * reg offset mask mode
+ */
+static const struct mux_config dm355_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM355, MMCSD0, 4, 2, 1, 0, false)
+
+MUX_CFG(DM355, SD1_CLK, 3, 6, 1, 1, false)
+MUX_CFG(DM355, SD1_CMD, 3, 7, 1, 1, false)
+MUX_CFG(DM355, SD1_DATA3, 3, 8, 3, 1, false)
+MUX_CFG(DM355, SD1_DATA2, 3, 10, 3, 1, false)
+MUX_CFG(DM355, SD1_DATA1, 3, 12, 3, 1, false)
+MUX_CFG(DM355, SD1_DATA0, 3, 14, 3, 1, false)
+
+MUX_CFG(DM355, I2C_SDA, 3, 19, 1, 1, false)
+MUX_CFG(DM355, I2C_SCL, 3, 20, 1, 1, false)
+
+MUX_CFG(DM355, MCBSP0_BDX, 3, 0, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_X, 3, 1, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_BFSX, 3, 2, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_BDR, 3, 3, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_R, 3, 4, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_BFSR, 3, 5, 1, 1, false)
+
+MUX_CFG(DM355, SPI0_SDI, 4, 1, 1, 0, false)
+MUX_CFG(DM355, SPI0_SDENA0, 4, 0, 1, 0, false)
+MUX_CFG(DM355, SPI0_SDENA1, 3, 28, 1, 1, false)
+
+INT_CFG(DM355, INT_EDMA_CC, 2, 1, 1, false)
+INT_CFG(DM355, INT_EDMA_TC0_ERR, 3, 1, 1, false)
+INT_CFG(DM355, INT_EDMA_TC1_ERR, 4, 1, 1, false)
+
+EVT_CFG(DM355, EVT8_ASP1_TX, 0, 1, 0, false)
+EVT_CFG(DM355, EVT9_ASP1_RX, 1, 1, 0, false)
+EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false)
+#endif
+};
+
+static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_DM355_CCDC_VDINT0] = 2,
+ [IRQ_DM355_CCDC_VDINT1] = 6,
+ [IRQ_DM355_CCDC_VDINT2] = 6,
+ [IRQ_DM355_IPIPE_HST] = 6,
+ [IRQ_DM355_H3AINT] = 6,
+ [IRQ_DM355_IPIPE_SDR] = 6,
+ [IRQ_DM355_IPIPEIFINT] = 6,
+ [IRQ_DM355_OSDINT] = 7,
+ [IRQ_DM355_VENCINT] = 6,
+ [IRQ_ASQINT] = 6,
+ [IRQ_IMXINT] = 6,
+ [IRQ_USBINT] = 4,
+ [IRQ_DM355_RTOINT] = 4,
+ [IRQ_DM355_UARTINT2] = 7,
+ [IRQ_DM355_TINT6] = 7,
+ [IRQ_CCINT0] = 5, /* dma */
+ [IRQ_CCERRINT] = 5, /* dma */
+ [IRQ_TCERRINT0] = 5, /* dma */
+ [IRQ_TCERRINT] = 5, /* dma */
+ [IRQ_DM355_SPINT2_1] = 7,
+ [IRQ_DM355_TINT7] = 4,
+ [IRQ_DM355_SDIOINT0] = 7,
+ [IRQ_MBXINT] = 7,
+ [IRQ_MBRINT] = 7,
+ [IRQ_MMCINT] = 7,
+ [IRQ_DM355_MMCINT1] = 7,
+ [IRQ_DM355_PWMINT3] = 7,
+ [IRQ_DDRINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_DM355_SDIOINT1] = 4,
+ [IRQ_TINT0_TINT12] = 2, /* clockevent */
+ [IRQ_TINT0_TINT34] = 2, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_PWMINT2] = 7,
+ [IRQ_I2C] = 3,
+ [IRQ_UARTINT0] = 3,
+ [IRQ_UARTINT1] = 3,
+ [IRQ_DM355_SPINT0_0] = 3,
+ [IRQ_DM355_SPINT0_1] = 3,
+ [IRQ_DM355_GPIO0] = 3,
+ [IRQ_DM355_GPIO1] = 7,
+ [IRQ_DM355_GPIO2] = 4,
+ [IRQ_DM355_GPIO3] = 4,
+ [IRQ_DM355_GPIO4] = 7,
+ [IRQ_DM355_GPIO5] = 7,
+ [IRQ_DM355_GPIO6] = 7,
+ [IRQ_DM355_GPIO7] = 7,
+ [IRQ_DM355_GPIO8] = 7,
+ [IRQ_DM355_GPIO9] = 7,
+ [IRQ_DM355_GPIOBNK0] = 7,
+ [IRQ_DM355_GPIOBNK1] = 7,
+ [IRQ_DM355_GPIOBNK2] = 7,
+ [IRQ_DM355_GPIOBNK3] = 7,
+ [IRQ_DM355_GPIOBNK4] = 7,
+ [IRQ_DM355_GPIOBNK5] = 7,
+ [IRQ_DM355_GPIOBNK6] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm355_no_event[] = {
+ 12, 13, 24, 56, 57,
+ 58, 59, 60, 61, 62,
+ 63,
+ -1
+};
+
+static struct edma_soc_info dm355_edma_info = {
+ .n_channel = 64,
+ .n_region = 4,
+ .n_slot = 128,
+ .n_tc = 2,
+ .noevent = dma_chan_dm355_no_event,
+};
+
+static struct resource edma_resources[] = {
+ {
+ .name = "edma_cc",
+ .start = 0x01c00000,
+ .end = 0x01c00000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc0",
+ .start = 0x01c10000,
+ .end = 0x01c10000 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc1",
+ .start = 0x01c10400,
+ .end = 0x01c10400 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CCINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CCERRINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* not using (or muxing) TC*_ERR */
+};
+
+static struct platform_device dm355_edma_device = {
+ .name = "edma",
+ .id = -1,
+ .dev.platform_data = &dm355_edma_info,
+ .num_resources = ARRAY_SIZE(edma_resources),
+ .resource = edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct map_desc dm355_io_desc[] = {
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = SRAM_VIRT,
+ .pfn = __phys_to_pfn(0x00010000),
+ .length = SZ_32K,
+ /* MT_MEMORY_NONCACHED requires supersection alignment */
+ .type = MT_DEVICE,
+ },
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm355_ids[] = {
+ {
+ .variant = 0x0,
+ .part_no = 0xb73b,
+ .manufacturer = 0x00f,
+ .cpu_id = DAVINCI_CPU_ID_DM355,
+ .name = "dm355",
+ },
+};
+
+static void __iomem *dm355_psc_bases[] = {
+ IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
+ * T0_TOP: Timer 0, top : clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top : <unused>
+ */
+struct davinci_timer_info dm355_timer_info = {
+ .timers = davinci_timer_instance,
+ .clockevent_id = T0_BOT,
+ .clocksource_id = T0_TOP,
+};
+
+static struct plat_serial8250_port dm355_serial_platform_data[] = {
+ {
+ .mapbase = DAVINCI_UART0_BASE,
+ .irq = IRQ_UARTINT0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART1_BASE,
+ .irq = IRQ_UARTINT1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DM355_UART2_BASE,
+ .irq = IRQ_DM355_UARTINT2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .flags = 0
+ },
+};
+
+static struct platform_device dm355_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm355_serial_platform_data,
+ },
+};
+
+static struct davinci_soc_info davinci_soc_info_dm355 = {
+ .io_desc = dm355_io_desc,
+ .io_desc_num = ARRAY_SIZE(dm355_io_desc),
+ .jtag_id_base = IO_ADDRESS(0x01c40028),
+ .ids = dm355_ids,
+ .ids_num = ARRAY_SIZE(dm355_ids),
+ .cpu_clks = dm355_clks,
+ .psc_bases = dm355_psc_bases,
+ .psc_bases_num = ARRAY_SIZE(dm355_psc_bases),
+ .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+ .pinmux_pins = dm355_pins,
+ .pinmux_pins_num = ARRAY_SIZE(dm355_pins),
+ .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+ .intc_type = DAVINCI_INTC_TYPE_AINTC,
+ .intc_irq_prios = dm355_default_priorities,
+ .intc_irq_num = DAVINCI_N_AINTC_IRQ,
+ .timer_info = &dm355_timer_info,
+ .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE),
+ .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE),
+ .gpio_num = 104,
+ .gpio_irq = IRQ_DM355_GPIOBNK0,
+ .serial_dev = &dm355_serial_device,
+ .sram_dma = 0x00010000,
+ .sram_len = SZ_32K,
+};
+
+void __init dm355_init(void)
+{
+ davinci_common_init(&davinci_soc_info_dm355);
+}
+
+static int __init dm355_init_devices(void)
+{
+ if (!cpu_is_davinci_dm355())
+ return 0;
+
+ davinci_cfg_reg(DM355_INT_EDMA_CC);
+ platform_device_register(&dm355_edma_device);
+ return 0;
+}
+postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index d428ef1..fb5449b3 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -11,7 +11,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
+#include <linux/serial_8250.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
#include <mach/dm644x.h>
#include <mach/clock.h>
@@ -20,6 +24,9 @@
#include <mach/irqs.h>
#include <mach/psc.h>
#include <mach/mux.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
#include "clock.h"
#include "mux.h"
@@ -312,7 +319,14 @@ struct davinci_clk dm644x_clks[] = {
CLK(NULL, NULL, NULL),
};
-#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+static struct emac_platform_data dm644x_emac_pdata = {
+ .ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET,
+ .ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET,
+ .ctrl_ram_offset = DM644X_EMAC_CNTRL_RAM_OFFSET,
+ .mdio_reg_offset = DM644X_EMAC_MDIO_OFFSET,
+ .ctrl_ram_size = DM644X_EMAC_CNTRL_RAM_SIZE,
+ .version = EMAC_VERSION_1,
+};
static struct resource dm644x_emac_resources[] = {
{
@@ -330,11 +344,15 @@ static struct resource dm644x_emac_resources[] = {
static struct platform_device dm644x_emac_device = {
.name = "davinci_emac",
.id = 1,
+ .dev = {
+ .platform_data = &dm644x_emac_pdata,
+ },
.num_resources = ARRAY_SIZE(dm644x_emac_resources),
.resource = dm644x_emac_resources,
};
-#endif
+#define PINMUX0 0x00
+#define PINMUX1 0x04
/*
* Device specific mux setup
@@ -343,6 +361,7 @@ static struct platform_device dm644x_emac_device = {
* reg offset mask mode
*/
static const struct mux_config dm644x_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true)
MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true)
MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true)
@@ -383,8 +402,76 @@ MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true)
MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true)
MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false)
+#endif
};
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_VDINT0] = 2,
+ [IRQ_VDINT1] = 6,
+ [IRQ_VDINT2] = 6,
+ [IRQ_HISTINT] = 6,
+ [IRQ_H3AINT] = 6,
+ [IRQ_PRVUINT] = 6,
+ [IRQ_RSZINT] = 6,
+ [7] = 7,
+ [IRQ_VENCINT] = 6,
+ [IRQ_ASQINT] = 6,
+ [IRQ_IMXINT] = 6,
+ [IRQ_VLCDINT] = 6,
+ [IRQ_USBINT] = 4,
+ [IRQ_EMACINT] = 4,
+ [14] = 7,
+ [15] = 7,
+ [IRQ_CCINT0] = 5, /* dma */
+ [IRQ_CCERRINT] = 5, /* dma */
+ [IRQ_TCERRINT0] = 5, /* dma */
+ [IRQ_TCERRINT] = 5, /* dma */
+ [IRQ_PSCIN] = 7,
+ [21] = 7,
+ [IRQ_IDE] = 4,
+ [23] = 7,
+ [IRQ_MBXINT] = 7,
+ [IRQ_MBRINT] = 7,
+ [IRQ_MMCINT] = 7,
+ [IRQ_SDIOINT] = 7,
+ [28] = 7,
+ [IRQ_DDRINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_VLQINT] = 4,
+ [IRQ_TINT0_TINT12] = 2, /* clockevent */
+ [IRQ_TINT0_TINT34] = 2, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_PWMINT2] = 7,
+ [IRQ_I2C] = 3,
+ [IRQ_UARTINT0] = 3,
+ [IRQ_UARTINT1] = 3,
+ [IRQ_UARTINT2] = 3,
+ [IRQ_SPINT0] = 3,
+ [IRQ_SPINT1] = 3,
+ [45] = 7,
+ [IRQ_DSP2ARM0] = 4,
+ [IRQ_DSP2ARM1] = 4,
+ [IRQ_GPIO0] = 7,
+ [IRQ_GPIO1] = 7,
+ [IRQ_GPIO2] = 7,
+ [IRQ_GPIO3] = 7,
+ [IRQ_GPIO4] = 7,
+ [IRQ_GPIO5] = 7,
+ [IRQ_GPIO6] = 7,
+ [IRQ_GPIO7] = 7,
+ [IRQ_GPIOBNK0] = 7,
+ [IRQ_GPIOBNK1] = 7,
+ [IRQ_GPIOBNK2] = 7,
+ [IRQ_GPIOBNK3] = 7,
+ [IRQ_GPIOBNK4] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
/*----------------------------------------------------------------------*/
@@ -444,10 +531,118 @@ static struct platform_device dm644x_edma_device = {
};
/*----------------------------------------------------------------------*/
+
+static struct map_desc dm644x_io_desc[] = {
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = SRAM_VIRT,
+ .pfn = __phys_to_pfn(0x00008000),
+ .length = SZ_16K,
+ /* MT_MEMORY_NONCACHED requires supersection alignment */
+ .type = MT_DEVICE,
+ },
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm644x_ids[] = {
+ {
+ .variant = 0x0,
+ .part_no = 0xb700,
+ .manufacturer = 0x017,
+ .cpu_id = DAVINCI_CPU_ID_DM6446,
+ .name = "dm6446",
+ },
+};
+
+static void __iomem *dm644x_psc_bases[] = {
+ IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
+ * T0_TOP: Timer 0, top : clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top : <unused>
+ */
+struct davinci_timer_info dm644x_timer_info = {
+ .timers = davinci_timer_instance,
+ .clockevent_id = T0_BOT,
+ .clocksource_id = T0_TOP,
+};
+
+static struct plat_serial8250_port dm644x_serial_platform_data[] = {
+ {
+ .mapbase = DAVINCI_UART0_BASE,
+ .irq = IRQ_UARTINT0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART1_BASE,
+ .irq = IRQ_UARTINT1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART2_BASE,
+ .irq = IRQ_UARTINT2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .flags = 0
+ },
+};
+
+static struct platform_device dm644x_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm644x_serial_platform_data,
+ },
+};
+
+static struct davinci_soc_info davinci_soc_info_dm644x = {
+ .io_desc = dm644x_io_desc,
+ .io_desc_num = ARRAY_SIZE(dm644x_io_desc),
+ .jtag_id_base = IO_ADDRESS(0x01c40028),
+ .ids = dm644x_ids,
+ .ids_num = ARRAY_SIZE(dm644x_ids),
+ .cpu_clks = dm644x_clks,
+ .psc_bases = dm644x_psc_bases,
+ .psc_bases_num = ARRAY_SIZE(dm644x_psc_bases),
+ .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+ .pinmux_pins = dm644x_pins,
+ .pinmux_pins_num = ARRAY_SIZE(dm644x_pins),
+ .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+ .intc_type = DAVINCI_INTC_TYPE_AINTC,
+ .intc_irq_prios = dm644x_default_priorities,
+ .intc_irq_num = DAVINCI_N_AINTC_IRQ,
+ .timer_info = &dm644x_timer_info,
+ .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE),
+ .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE),
+ .gpio_num = 71,
+ .gpio_irq = IRQ_GPIOBNK0,
+ .serial_dev = &dm644x_serial_device,
+ .emac_pdata = &dm644x_emac_pdata,
+ .sram_dma = 0x00008000,
+ .sram_len = SZ_16K,
+};
+
void __init dm644x_init(void)
{
- davinci_clk_init(dm644x_clks);
- davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
+ davinci_common_init(&davinci_soc_info_dm644x);
}
static int __init dm644x_init_devices(void)
@@ -456,6 +651,7 @@ static int __init dm644x_init_devices(void)
return 0;
platform_device_register(&dm644x_edma_device);
+ platform_device_register(&dm644x_emac_device);
return 0;
}
postcore_initcall(dm644x_init_devices);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
new file mode 100644
index 0000000..334f071
--- /dev/null
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -0,0 +1,636 @@
+/*
+ * TI DaVinci DM644x chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm646x.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/irqs.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM646X_REF_FREQ 27000000
+#define DM646X_AUX_FREQ 24000000
+
+static struct pll_data pll1_data = {
+ .num = 1,
+ .phys_base = DAVINCI_PLL1_BASE,
+};
+
+static struct pll_data pll2_data = {
+ .num = 2,
+ .phys_base = DAVINCI_PLL2_BASE,
+};
+
+static struct clk ref_clk = {
+ .name = "ref_clk",
+ .rate = DM646X_REF_FREQ,
+};
+
+static struct clk aux_clkin = {
+ .name = "aux_clkin",
+ .rate = DM646X_AUX_FREQ,
+};
+
+static struct clk pll1_clk = {
+ .name = "pll1",
+ .parent = &ref_clk,
+ .pll_data = &pll1_data,
+ .flags = CLK_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+ .name = "pll1_sysclk1",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+ .name = "pll1_sysclk2",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+ .name = "pll1_sysclk3",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+ .name = "pll1_sysclk4",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclk5 = {
+ .name = "pll1_sysclk5",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV5,
+};
+
+static struct clk pll1_sysclk6 = {
+ .name = "pll1_sysclk6",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV6,
+};
+
+static struct clk pll1_sysclk8 = {
+ .name = "pll1_sysclk8",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV8,
+};
+
+static struct clk pll1_sysclk9 = {
+ .name = "pll1_sysclk9",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV9,
+};
+
+static struct clk pll1_sysclkbp = {
+ .name = "pll1_sysclkbp",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV,
+};
+
+static struct clk pll1_aux_clk = {
+ .name = "pll1_aux_clk",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll2_clk = {
+ .name = "pll2_clk",
+ .parent = &ref_clk,
+ .pll_data = &pll2_data,
+ .flags = CLK_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+ .name = "pll2_sysclk1",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk dsp_clk = {
+ .name = "dsp",
+ .parent = &pll1_sysclk1,
+ .lpsc = DM646X_LPSC_C64X_CPU,
+ .flags = PSC_DSP,
+ .usecount = 1, /* REVISIT how to disable? */
+};
+
+static struct clk arm_clk = {
+ .name = "arm",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM646X_LPSC_ARM,
+ .flags = ALWAYS_ENABLED,
+};
+
+static struct clk uart0_clk = {
+ .name = "uart0",
+ .parent = &aux_clkin,
+ .lpsc = DM646X_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+ .name = "uart1",
+ .parent = &aux_clkin,
+ .lpsc = DM646X_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+ .name = "uart2",
+ .parent = &aux_clkin,
+ .lpsc = DM646X_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+ .name = "I2CCLK",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_I2C,
+};
+
+static struct clk gpio_clk = {
+ .name = "gpio",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+ .name = "aemif",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_AEMIF,
+ .flags = ALWAYS_ENABLED,
+};
+
+static struct clk emac_clk = {
+ .name = "emac",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_EMAC,
+};
+
+static struct clk pwm0_clk = {
+ .name = "pwm0",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_PWM0,
+ .usecount = 1, /* REVIST: disabling hangs system */
+};
+
+static struct clk pwm1_clk = {
+ .name = "pwm1",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_PWM1,
+ .usecount = 1, /* REVIST: disabling hangs system */
+};
+
+static struct clk timer0_clk = {
+ .name = "timer0",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+ .name = "timer1",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+ .name = "timer2",
+ .parent = &pll1_sysclk3,
+ .flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */
+};
+
+static struct clk vpif0_clk = {
+ .name = "vpif0",
+ .parent = &ref_clk,
+ .lpsc = DM646X_LPSC_VPSSMSTR,
+ .flags = ALWAYS_ENABLED,
+};
+
+static struct clk vpif1_clk = {
+ .name = "vpif1",
+ .parent = &ref_clk,
+ .lpsc = DM646X_LPSC_VPSSSLV,
+ .flags = ALWAYS_ENABLED,
+};
+
+struct davinci_clk dm646x_clks[] = {
+ CLK(NULL, "ref", &ref_clk),
+ CLK(NULL, "aux", &aux_clkin),
+ CLK(NULL, "pll1", &pll1_clk),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk1),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk2),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk3),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk4),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk5),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk6),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk8),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk9),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclkbp),
+ CLK(NULL, "pll1_aux", &pll1_aux_clk),
+ CLK(NULL, "pll2", &pll2_clk),
+ CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+ CLK(NULL, "dsp", &dsp_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "uart0", &uart0_clk),
+ CLK(NULL, "uart1", &uart1_clk),
+ CLK(NULL, "uart2", &uart2_clk),
+ CLK("i2c_davinci.1", NULL, &i2c_clk),
+ CLK(NULL, "gpio", &gpio_clk),
+ CLK(NULL, "aemif", &aemif_clk),
+ CLK("davinci_emac.1", NULL, &emac_clk),
+ CLK(NULL, "pwm0", &pwm0_clk),
+ CLK(NULL, "pwm1", &pwm1_clk),
+ CLK(NULL, "timer0", &timer0_clk),
+ CLK(NULL, "timer1", &timer1_clk),
+ CLK("watchdog", NULL, &timer2_clk),
+ CLK(NULL, "vpif0", &vpif0_clk),
+ CLK(NULL, "vpif1", &vpif1_clk),
+ CLK(NULL, NULL, NULL),
+};
+
+static struct emac_platform_data dm646x_emac_pdata = {
+ .ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET,
+ .ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET,
+ .ctrl_ram_offset = DM646X_EMAC_CNTRL_RAM_OFFSET,
+ .mdio_reg_offset = DM646X_EMAC_MDIO_OFFSET,
+ .ctrl_ram_size = DM646X_EMAC_CNTRL_RAM_SIZE,
+ .version = EMAC_VERSION_2,
+};
+
+static struct resource dm646x_emac_resources[] = {
+ {
+ .start = DM646X_EMAC_BASE,
+ .end = DM646X_EMAC_BASE + 0x47ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_DM646X_EMACRXTHINT,
+ .end = IRQ_DM646X_EMACRXTHINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM646X_EMACRXINT,
+ .end = IRQ_DM646X_EMACRXINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM646X_EMACTXINT,
+ .end = IRQ_DM646X_EMACTXINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM646X_EMACMISCINT,
+ .end = IRQ_DM646X_EMACMISCINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dm646x_emac_device = {
+ .name = "davinci_emac",
+ .id = 1,
+ .dev = {
+ .platform_data = &dm646x_emac_pdata,
+ },
+ .num_resources = ARRAY_SIZE(dm646x_emac_resources),
+ .resource = dm646x_emac_resources,
+};
+
+#define PINMUX0 0x00
+#define PINMUX1 0x04
+
+/*
+ * Device specific mux setup
+ *
+ * soc description mux mode mode mux dbg
+ * reg offset mask mode
+ */
+static const struct mux_config dm646x_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM646X, ATAEN, 0, 0, 1, 1, true)
+
+MUX_CFG(DM646X, AUDCK1, 0, 29, 1, 0, false)
+
+MUX_CFG(DM646X, AUDCK0, 0, 28, 1, 0, false)
+
+MUX_CFG(DM646X, CRGMUX, 0, 24, 7, 5, true)
+
+MUX_CFG(DM646X, STSOMUX_DISABLE, 0, 22, 3, 0, true)
+
+MUX_CFG(DM646X, STSIMUX_DISABLE, 0, 20, 3, 0, true)
+
+MUX_CFG(DM646X, PTSOMUX_DISABLE, 0, 18, 3, 0, true)
+
+MUX_CFG(DM646X, PTSIMUX_DISABLE, 0, 16, 3, 0, true)
+
+MUX_CFG(DM646X, STSOMUX, 0, 22, 3, 2, true)
+
+MUX_CFG(DM646X, STSIMUX, 0, 20, 3, 2, true)
+
+MUX_CFG(DM646X, PTSOMUX_PARALLEL, 0, 18, 3, 2, true)
+
+MUX_CFG(DM646X, PTSIMUX_PARALLEL, 0, 16, 3, 2, true)
+
+MUX_CFG(DM646X, PTSOMUX_SERIAL, 0, 18, 3, 3, true)
+
+MUX_CFG(DM646X, PTSIMUX_SERIAL, 0, 16, 3, 3, true)
+#endif
+};
+
+static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_DM646X_VP_VERTINT0] = 7,
+ [IRQ_DM646X_VP_VERTINT1] = 7,
+ [IRQ_DM646X_VP_VERTINT2] = 7,
+ [IRQ_DM646X_VP_VERTINT3] = 7,
+ [IRQ_DM646X_VP_ERRINT] = 7,
+ [IRQ_DM646X_RESERVED_1] = 7,
+ [IRQ_DM646X_RESERVED_2] = 7,
+ [IRQ_DM646X_WDINT] = 7,
+ [IRQ_DM646X_CRGENINT0] = 7,
+ [IRQ_DM646X_CRGENINT1] = 7,
+ [IRQ_DM646X_TSIFINT0] = 7,
+ [IRQ_DM646X_TSIFINT1] = 7,
+ [IRQ_DM646X_VDCEINT] = 7,
+ [IRQ_DM646X_USBINT] = 7,
+ [IRQ_DM646X_USBDMAINT] = 7,
+ [IRQ_DM646X_PCIINT] = 7,
+ [IRQ_CCINT0] = 7, /* dma */
+ [IRQ_CCERRINT] = 7, /* dma */
+ [IRQ_TCERRINT0] = 7, /* dma */
+ [IRQ_TCERRINT] = 7, /* dma */
+ [IRQ_DM646X_TCERRINT2] = 7,
+ [IRQ_DM646X_TCERRINT3] = 7,
+ [IRQ_DM646X_IDE] = 7,
+ [IRQ_DM646X_HPIINT] = 7,
+ [IRQ_DM646X_EMACRXTHINT] = 7,
+ [IRQ_DM646X_EMACRXINT] = 7,
+ [IRQ_DM646X_EMACTXINT] = 7,
+ [IRQ_DM646X_EMACMISCINT] = 7,
+ [IRQ_DM646X_MCASP0TXINT] = 7,
+ [IRQ_DM646X_MCASP0RXINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_DM646X_RESERVED_3] = 7,
+ [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
+ [IRQ_TINT0_TINT34] = 7, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_DM646X_VLQINT] = 7,
+ [IRQ_I2C] = 7,
+ [IRQ_UARTINT0] = 7,
+ [IRQ_UARTINT1] = 7,
+ [IRQ_DM646X_UARTINT2] = 7,
+ [IRQ_DM646X_SPINT0] = 7,
+ [IRQ_DM646X_SPINT1] = 7,
+ [IRQ_DM646X_DSP2ARMINT] = 7,
+ [IRQ_DM646X_RESERVED_4] = 7,
+ [IRQ_DM646X_PSCINT] = 7,
+ [IRQ_DM646X_GPIO0] = 7,
+ [IRQ_DM646X_GPIO1] = 7,
+ [IRQ_DM646X_GPIO2] = 7,
+ [IRQ_DM646X_GPIO3] = 7,
+ [IRQ_DM646X_GPIO4] = 7,
+ [IRQ_DM646X_GPIO5] = 7,
+ [IRQ_DM646X_GPIO6] = 7,
+ [IRQ_DM646X_GPIO7] = 7,
+ [IRQ_DM646X_GPIOBNK0] = 7,
+ [IRQ_DM646X_GPIOBNK1] = 7,
+ [IRQ_DM646X_GPIOBNK2] = 7,
+ [IRQ_DM646X_DDRINT] = 7,
+ [IRQ_DM646X_AEMIFINT] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm646x_no_event[] = {
+ 0, 1, 2, 3, 13,
+ 14, 15, 24, 25, 26,
+ 27, 30, 31, 54, 55,
+ 56,
+ -1
+};
+
+static struct edma_soc_info dm646x_edma_info = {
+ .n_channel = 64,
+ .n_region = 6, /* 0-1, 4-7 */
+ .n_slot = 512,
+ .n_tc = 4,
+ .noevent = dma_chan_dm646x_no_event,
+};
+
+static struct resource edma_resources[] = {
+ {
+ .name = "edma_cc",
+ .start = 0x01c00000,
+ .end = 0x01c00000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc0",
+ .start = 0x01c10000,
+ .end = 0x01c10000 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc1",
+ .start = 0x01c10400,
+ .end = 0x01c10400 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc2",
+ .start = 0x01c10800,
+ .end = 0x01c10800 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc3",
+ .start = 0x01c10c00,
+ .end = 0x01c10c00 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CCINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CCERRINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* not using TC*_ERR */
+};
+
+static struct platform_device dm646x_edma_device = {
+ .name = "edma",
+ .id = -1,
+ .dev.platform_data = &dm646x_edma_info,
+ .num_resources = ARRAY_SIZE(edma_resources),
+ .resource = edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct map_desc dm646x_io_desc[] = {
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = SRAM_VIRT,
+ .pfn = __phys_to_pfn(0x00010000),
+ .length = SZ_32K,
+ /* MT_MEMORY_NONCACHED requires supersection alignment */
+ .type = MT_DEVICE,
+ },
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm646x_ids[] = {
+ {
+ .variant = 0x0,
+ .part_no = 0xb770,
+ .manufacturer = 0x017,
+ .cpu_id = DAVINCI_CPU_ID_DM6467,
+ .name = "dm6467",
+ },
+};
+
+static void __iomem *dm646x_psc_bases[] = {
+ IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
+ * T0_TOP: Timer 0, top : clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top : <unused>
+ */
+struct davinci_timer_info dm646x_timer_info = {
+ .timers = davinci_timer_instance,
+ .clockevent_id = T0_BOT,
+ .clocksource_id = T0_TOP,
+};
+
+static struct plat_serial8250_port dm646x_serial_platform_data[] = {
+ {
+ .mapbase = DAVINCI_UART0_BASE,
+ .irq = IRQ_UARTINT0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM32,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART1_BASE,
+ .irq = IRQ_UARTINT1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM32,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART2_BASE,
+ .irq = IRQ_DM646X_UARTINT2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM32,
+ .regshift = 2,
+ },
+ {
+ .flags = 0
+ },
+};
+
+static struct platform_device dm646x_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm646x_serial_platform_data,
+ },
+};
+
+static struct davinci_soc_info davinci_soc_info_dm646x = {
+ .io_desc = dm646x_io_desc,
+ .io_desc_num = ARRAY_SIZE(dm646x_io_desc),
+ .jtag_id_base = IO_ADDRESS(0x01c40028),
+ .ids = dm646x_ids,
+ .ids_num = ARRAY_SIZE(dm646x_ids),
+ .cpu_clks = dm646x_clks,
+ .psc_bases = dm646x_psc_bases,
+ .psc_bases_num = ARRAY_SIZE(dm646x_psc_bases),
+ .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+ .pinmux_pins = dm646x_pins,
+ .pinmux_pins_num = ARRAY_SIZE(dm646x_pins),
+ .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+ .intc_type = DAVINCI_INTC_TYPE_AINTC,
+ .intc_irq_prios = dm646x_default_priorities,
+ .intc_irq_num = DAVINCI_N_AINTC_IRQ,
+ .timer_info = &dm646x_timer_info,
+ .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE),
+ .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE),
+ .gpio_num = 43, /* Only 33 usable */
+ .gpio_irq = IRQ_DM646X_GPIOBNK0,
+ .serial_dev = &dm646x_serial_device,
+ .emac_pdata = &dm646x_emac_pdata,
+ .sram_dma = 0x10010000,
+ .sram_len = SZ_32K,
+};
+
+void __init dm646x_init(void)
+{
+ davinci_common_init(&davinci_soc_info_dm646x);
+}
+
+static int __init dm646x_init_devices(void)
+{
+ if (!cpu_is_davinci_dm646x())
+ return 0;
+
+ platform_device_register(&dm646x_edma_device);
+ platform_device_register(&dm646x_emac_device);
+ return 0;
+}
+postcore_initcall(dm646x_init_devices);
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 1aba41c..1b65321 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -23,6 +23,7 @@
#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
+#include <mach/common.h>
#include <mach/gpio.h>
#include <asm/mach/irq.h>
@@ -37,14 +38,13 @@ struct davinci_gpio {
static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
-static unsigned __initdata ngpio;
-
/* create a non-inlined version */
static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
{
return __gpio_to_controller(gpio);
}
+static int __init davinci_gpio_irq_setup(void);
/*--------------------------------------------------------------------------*/
@@ -115,23 +115,16 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
static int __init davinci_gpio_setup(void)
{
int i, base;
+ unsigned ngpio;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
- /* The gpio banks conceptually expose a segmented bitmap,
+ /*
+ * The gpio banks conceptually expose a segmented bitmap,
* and "ngpio" is one more than the largest zero-based
* bit index that's valid.
*/
- if (cpu_is_davinci_dm355()) { /* or dm335() */
- ngpio = 104;
- } else if (cpu_is_davinci_dm644x()) { /* or dm337() */
- ngpio = 71;
- } else if (cpu_is_davinci_dm646x()) {
- /* NOTE: each bank has several "reserved" bits,
- * unusable as GPIOs. Only 33 of the GPIO numbers
- * are usable, and we're not rejecting the others.
- */
- ngpio = 43;
- } else {
- /* if cpu_is_davinci_dm643x() ngpio = 111 */
+ ngpio = soc_info->gpio_num;
+ if (ngpio == 0) {
pr_err("GPIO setup: how many GPIOs?\n");
return -EINVAL;
}
@@ -157,6 +150,7 @@ static int __init davinci_gpio_setup(void)
gpiochip_add(&chips[i].chip);
}
+ davinci_gpio_irq_setup();
return 0;
}
pure_initcall(davinci_gpio_setup);
@@ -187,10 +181,15 @@ static void gpio_irq_enable(unsigned irq)
{
struct gpio_controller *__iomem g = get_irq_chip_data(irq);
u32 mask = __gpio_mask(irq_to_gpio(irq));
+ unsigned status = irq_desc[irq].status;
+
+ status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+ if (!status)
+ status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
- if (irq_desc[irq].status & IRQ_TYPE_EDGE_FALLING)
+ if (status & IRQ_TYPE_EDGE_FALLING)
__raw_writel(mask, &g->set_falling);
- if (irq_desc[irq].status & IRQ_TYPE_EDGE_RISING)
+ if (status & IRQ_TYPE_EDGE_RISING)
__raw_writel(mask, &g->set_rising);
}
@@ -205,10 +204,13 @@ static int gpio_irq_type(unsigned irq, unsigned trigger)
irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
irq_desc[irq].status |= trigger;
- __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
- ? &g->set_falling : &g->clr_falling);
- __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
- ? &g->set_rising : &g->clr_rising);
+ /* don't enable the IRQ if it's currently disabled */
+ if (irq_desc[irq].depth == 0) {
+ __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+ ? &g->set_falling : &g->clr_falling);
+ __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+ ? &g->set_rising : &g->clr_rising);
+ }
return 0;
}
@@ -230,6 +232,7 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
mask <<= 16;
/* temporarily mask (level sensitive) parent IRQ */
+ desc->chip->mask(irq);
desc->chip->ack(irq);
while (1) {
u32 status;
@@ -268,17 +271,15 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
static int __init davinci_gpio_irq_setup(void)
{
unsigned gpio, irq, bank;
- unsigned bank_irq;
struct clk *clk;
u32 binten = 0;
+ unsigned ngpio, bank_irq;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ ngpio = soc_info->gpio_num;
- if (cpu_is_davinci_dm355()) { /* or dm335() */
- bank_irq = IRQ_DM355_GPIOBNK0;
- } else if (cpu_is_davinci_dm644x()) {
- bank_irq = IRQ_GPIOBNK0;
- } else if (cpu_is_davinci_dm646x()) {
- bank_irq = IRQ_DM646X_GPIOBNK0;
- } else {
+ bank_irq = soc_info->gpio_irq;
+ if (bank_irq == 0) {
printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
return -EINVAL;
}
@@ -318,11 +319,9 @@ static int __init davinci_gpio_irq_setup(void)
/* BINTEN -- per-bank interrupt enable. genirq would also let these
* bits be set/cleared dynamically.
*/
- __raw_writel(binten, (void *__iomem)
- IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
+ __raw_writel(binten, soc_info->gpio_base + 0x08);
printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
return 0;
}
-arch_initcall(davinci_gpio_irq_setup);
diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c
deleted file mode 100644
index 018b994..0000000
--- a/arch/arm/mach-davinci/id.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Davinci CPU identification code
- *
- * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * Derived from OMAP1 CPU identification code.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#define JTAG_ID_BASE IO_ADDRESS(0x01c40028)
-
-static unsigned int davinci_revision;
-
-struct davinci_id {
- u8 variant; /* JTAG ID bits 31:28 */
- u16 part_no; /* JTAG ID bits 27:12 */
- u32 manufacturer; /* JTAG ID bits 11:1 */
- u32 type; /* Cpu id bits [31:8], cpu class bits [7:0] */
-};
-
-/* Register values to detect the DaVinci version */
-static struct davinci_id davinci_ids[] __initdata = {
- {
- /* DM6446 */
- .part_no = 0xb700,
- .variant = 0x0,
- .manufacturer = 0x017,
- .type = 0x64460000,
- },
- {
- /* DM646X */
- .part_no = 0xb770,
- .variant = 0x0,
- .manufacturer = 0x017,
- .type = 0x64670000,
- },
- {
- /* DM355 */
- .part_no = 0xb73b,
- .variant = 0x0,
- .manufacturer = 0x00f,
- .type = 0x03550000,
- },
-};
-
-/*
- * Get Device Part No. from JTAG ID register
- */
-static u16 __init davinci_get_part_no(void)
-{
- u32 dev_id, part_no;
-
- dev_id = __raw_readl(JTAG_ID_BASE);
-
- part_no = ((dev_id >> 12) & 0xffff);
-
- return part_no;
-}
-
-/*
- * Get Device Revision from JTAG ID register
- */
-static u8 __init davinci_get_variant(void)
-{
- u32 variant;
-
- variant = __raw_readl(JTAG_ID_BASE);
-
- variant = (variant >> 28) & 0xf;
-
- return variant;
-}
-
-unsigned int davinci_rev(void)
-{
- return davinci_revision >> 16;
-}
-EXPORT_SYMBOL(davinci_rev);
-
-void __init davinci_check_revision(void)
-{
- int i;
- u16 part_no;
- u8 variant;
-
- part_no = davinci_get_part_no();
- variant = davinci_get_variant();
-
- /* First check only the major version in a safe way */
- for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
- if (part_no == (davinci_ids[i].part_no)) {
- davinci_revision = davinci_ids[i].type;
- break;
- }
- }
-
- /* Check if we can find the dev revision */
- for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
- if (part_no == davinci_ids[i].part_no &&
- variant == davinci_ids[i].variant) {
- davinci_revision = davinci_ids[i].type;
- break;
- }
- }
-
- printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
- davinci_rev(), variant);
-}
diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
deleted file mode 100644
index 3216f21..0000000
--- a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * DaVinci DM6446 EVM board specific headers
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or ifndef.
- */
-
-#ifndef _MACH_DAVINCI_DM6446EVM_H
-#define _MACH_DAVINCI_DM6446EVM_H
-
-#include <linux/types.h>
-
-int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
-int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 1917709..a1f03b6 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -17,7 +17,8 @@ struct sys_timer;
extern struct sys_timer davinci_timer;
extern void davinci_irq_init(void);
-extern void davinci_map_common_io(void);
+extern void __iomem *davinci_intc_base;
+extern int davinci_intc_type;
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);
@@ -25,4 +26,56 @@ extern void setup_usb(unsigned mA, unsigned potpgt_msec);
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);
+struct davinci_timer_instance {
+ void __iomem *base;
+ u32 bottom_irq;
+ u32 top_irq;
+ unsigned long cmp_off;
+ unsigned int cmp_irq;
+};
+
+struct davinci_timer_info {
+ struct davinci_timer_instance *timers;
+ unsigned int clockevent_id;
+ unsigned int clocksource_id;
+};
+
+/* SoC specific init support */
+struct davinci_soc_info {
+ struct map_desc *io_desc;
+ unsigned long io_desc_num;
+ u32 cpu_id;
+ u32 jtag_id;
+ void __iomem *jtag_id_base;
+ struct davinci_id *ids;
+ unsigned long ids_num;
+ struct davinci_clk *cpu_clks;
+ void __iomem **psc_bases;
+ unsigned long psc_bases_num;
+ void __iomem *pinmux_base;
+ const struct mux_config *pinmux_pins;
+ unsigned long pinmux_pins_num;
+ void __iomem *intc_base;
+ int intc_type;
+ u8 *intc_irq_prios;
+ unsigned long intc_irq_num;
+ struct davinci_timer_info *timer_info;
+ void __iomem *wdt_base;
+ void __iomem *gpio_base;
+ unsigned gpio_num;
+ unsigned gpio_irq;
+ struct platform_device *serial_dev;
+ struct emac_platform_data *emac_pdata;
+ dma_addr_t sram_dma;
+ unsigned sram_len;
+};
+
+extern struct davinci_soc_info davinci_soc_info;
+
+extern void davinci_common_init(struct davinci_soc_info *soc_info);
+
+/* standard place to map on-chip SRAMs; they *may* support DMA */
+#define SRAM_VIRT 0xfffe0000
+#define SRAM_SIZE SZ_128K
+
#endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h
new file mode 100644
index 0000000..c4d27ee
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cp_intc.h
@@ -0,0 +1,57 @@
+/*
+ * TI Common Platform Interrupt Controller (cp_intc) definitions
+ *
+ * Author: Steve Chen <schen@mvista.com>
+ * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef __ASM_HARDWARE_CP_INTC_H
+#define __ASM_HARDWARE_CP_INTC_H
+
+#define CP_INTC_REV 0x00
+#define CP_INTC_CTRL 0x04
+#define CP_INTC_HOST_CTRL 0x0C
+#define CP_INTC_GLOBAL_ENABLE 0x10
+#define CP_INTC_GLOBAL_NESTING_LEVEL 0x1C
+#define CP_INTC_SYS_STAT_IDX_SET 0x20
+#define CP_INTC_SYS_STAT_IDX_CLR 0x24
+#define CP_INTC_SYS_ENABLE_IDX_SET 0x28
+#define CP_INTC_SYS_ENABLE_IDX_CLR 0x2C
+#define CP_INTC_GLOBAL_WAKEUP_ENABLE 0x30
+#define CP_INTC_HOST_ENABLE_IDX_SET 0x34
+#define CP_INTC_HOST_ENABLE_IDX_CLR 0x38
+#define CP_INTC_PACING_PRESCALE 0x40
+#define CP_INTC_VECTOR_BASE 0x50
+#define CP_INTC_VECTOR_SIZE 0x54
+#define CP_INTC_VECTOR_NULL 0x58
+#define CP_INTC_PRIO_IDX 0x80
+#define CP_INTC_PRIO_VECTOR 0x84
+#define CP_INTC_SECURE_ENABLE 0x90
+#define CP_INTC_SECURE_PRIO_IDX 0x94
+#define CP_INTC_PACING_PARAM(n) (0x0100 + (n << 4))
+#define CP_INTC_PACING_DEC(n) (0x0104 + (n << 4))
+#define CP_INTC_PACING_MAP(n) (0x0108 + (n << 4))
+#define CP_INTC_SYS_RAW_STAT(n) (0x0200 + (n << 2))
+#define CP_INTC_SYS_STAT_CLR(n) (0x0280 + (n << 2))
+#define CP_INTC_SYS_ENABLE_SET(n) (0x0300 + (n << 2))
+#define CP_INTC_SYS_ENABLE_CLR(n) (0x0380 + (n << 2))
+#define CP_INTC_CHAN_MAP(n) (0x0400 + (n << 2))
+#define CP_INTC_HOST_MAP(n) (0x0800 + (n << 2))
+#define CP_INTC_HOST_PRIO_IDX(n) (0x0900 + (n << 2))
+#define CP_INTC_SYS_POLARITY(n) (0x0D00 + (n << 2))
+#define CP_INTC_SYS_TYPE(n) (0x0D80 + (n << 2))
+#define CP_INTC_WAKEUP_ENABLE(n) (0x0E00 + (n << 2))
+#define CP_INTC_DEBUG_SELECT(n) (0x0F00 + (n << 2))
+#define CP_INTC_SYS_SECURE_ENABLE(n) (0x1000 + (n << 2))
+#define CP_INTC_HOST_NESTING_LEVEL(n) (0x1100 + (n << 2))
+#define CP_INTC_HOST_ENABLE(n) (0x1500 + (n << 2))
+#define CP_INTC_HOST_PRIO_VECTOR(n) (0x1600 + (n << 2))
+#define CP_INTC_VECTOR_ADDR(n) (0x2000 + (n << 2))
+
+void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
+ u8 *irq_prio);
+
+#endif /* __ASM_HARDWARE_CP_INTC_H */
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index 27cfb1b..d12a5ed 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -16,17 +16,30 @@
#ifndef _ASM_ARCH_CPU_H
#define _ASM_ARCH_CPU_H
-extern unsigned int davinci_rev(void);
+#include <mach/common.h>
-#define IS_DAVINCI_CPU(type, id) \
-static inline int is_davinci_dm ##type(void) \
-{ \
- return (davinci_rev() == (id)) ? 1 : 0; \
+struct davinci_id {
+ u8 variant; /* JTAG ID bits 31:28 */
+ u16 part_no; /* JTAG ID bits 27:12 */
+ u16 manufacturer; /* JTAG ID bits 11:1 */
+ u32 cpu_id;
+ char *name;
+};
+
+/* Can use lower 16 bits of cpu id for a variant when required */
+#define DAVINCI_CPU_ID_DM6446 0x64460000
+#define DAVINCI_CPU_ID_DM6467 0x64670000
+#define DAVINCI_CPU_ID_DM355 0x03550000
+
+#define IS_DAVINCI_CPU(type, id) \
+static inline int is_davinci_ ##type(void) \
+{ \
+ return (davinci_soc_info.cpu_id == (id)); \
}
-IS_DAVINCI_CPU(644x, 0x6446)
-IS_DAVINCI_CPU(646x, 0x6467)
-IS_DAVINCI_CPU(355, 0x355)
+IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
+IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
+IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
#ifdef CONFIG_ARCH_DAVINCI_DM644x
#define cpu_is_davinci_dm644x() is_davinci_dm644x()
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index e6c0f0d..de3fc21 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -9,6 +9,16 @@
* or implied.
*/
+/* Modifications
+ * Jan 2009 Chaithrika U S Added senduart, busyuart, waituart
+ * macros, based on debug-8250.S file
+ * but using 32-bit accesses required for
+ * some davinci devices.
+ */
+
+#include <linux/serial_reg.h>
+#define UART_SHIFT 2
+
.macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
@@ -17,5 +27,22 @@
orr \rx, \rx, #0x00c20000 @ UART 0
.endm
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UART_TX << UART_SHIFT]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1002b
+ .endm
+
+ .macro waituart,rd,rx
+#ifdef FLOW_CONTROL
+1001: ldr \rd, [\rx, #UART_MSR << UART_SHIFT]
+ tst \rd, #UART_MSR_CTS
+ beq 1001b
+#endif
+ .endm
+
diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h
new file mode 100644
index 0000000..54903b7
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm355.h
@@ -0,0 +1,22 @@
+/*
+ * Chip specific defines for DM355 SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM355_H
+#define __ASM_ARCH_DM355_H
+
+#include <mach/hardware.h>
+
+struct spi_board_info;
+
+void __init dm355_init(void);
+void dm355_init_spi0(unsigned chipselect_mask,
+ struct spi_board_info *info, unsigned len);
+
+#endif /* __ASM_ARCH_DM355_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 3dcb9f4..15d42b9 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -24,6 +24,7 @@
#include <linux/platform_device.h>
#include <mach/hardware.h>
+#include <mach/emac.h>
#define DM644X_EMAC_BASE (0x01C80000)
#define DM644X_EMAC_CNTRL_OFFSET (0x0000)
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
new file mode 100644
index 0000000..1fc764c
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -0,0 +1,26 @@
+/*
+ * Chip specific defines for DM646x SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM646X_H
+#define __ASM_ARCH_DM646X_H
+
+#include <mach/hardware.h>
+#include <mach/emac.h>
+
+#define DM646X_EMAC_BASE (0x01C80000)
+#define DM646X_EMAC_CNTRL_OFFSET (0x0000)
+#define DM646X_EMAC_CNTRL_MOD_OFFSET (0x1000)
+#define DM646X_EMAC_CNTRL_RAM_OFFSET (0x2000)
+#define DM646X_EMAC_MDIO_OFFSET (0x4000)
+#define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000)
+
+void __init dm646x_init(void);
+
+#endif /* __ASM_ARCH_DM646X_H */
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index f6fc539..24a3792 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -208,10 +208,6 @@ void edma_clear_event(unsigned channel);
void edma_pause(unsigned channel);
void edma_resume(unsigned channel);
-/* UNRELATED TO DMA */
-int davinci_alloc_iram(unsigned size);
-void davinci_free_iram(unsigned addr, unsigned size);
-
/* platform_data for EDMA driver */
struct edma_soc_info {
diff --git a/arch/arm/mach-davinci/include/mach/emac.h b/arch/arm/mach-davinci/include/mach/emac.h
new file mode 100644
index 0000000..beff4fb
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/emac.h
@@ -0,0 +1,36 @@
+/*
+ * TI DaVinci EMAC platform support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _MACH_DAVINCI_EMAC_H
+#define _MACH_DAVINCI_EMAC_H
+
+#include <linux/if_ether.h>
+#include <linux/memory.h>
+
+struct emac_platform_data {
+ char mac_addr[ETH_ALEN];
+ u32 ctrl_reg_offset;
+ u32 ctrl_mod_reg_offset;
+ u32 ctrl_ram_offset;
+ u32 mdio_reg_offset;
+ u32 ctrl_ram_size;
+ u32 phy_mask;
+ u32 mdio_max_freq;
+ u8 rmii_en;
+ u8 version;
+};
+
+enum {
+ EMAC_VERSION_1, /* DM644x */
+ EMAC_VERSION_2, /* DM646x */
+};
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
index 039b84f..fbdebc7 100644
--- a/arch/arm/mach-davinci/include/mach/entry-macro.S
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -15,17 +15,36 @@
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+ ldr \base, =davinci_intc_base
+ ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC)
+ ldr \tmp, =davinci_intc_type
+ ldr \tmp, [\tmp]
+ cmp \tmp, #DAVINCI_INTC_TYPE_CP_INTC
+ beq 1001f
+#endif
+#if defined(CONFIG_AINTC)
ldr \tmp, [\base, #0x14]
- mov \tmp, \tmp, lsr #2
+ movs \tmp, \tmp, lsr #2
sub \irqnr, \tmp, #1
- cmp \tmp, #0
+ b 1002f
+#endif
+#if defined(CONFIG_CP_INTC)
+1001: ldr \irqnr, [\base, #0x80] /* get irq number */
+ and \irqnr, \irqnr, #0xff /* irq is in bits 0-9 */
+ mov \tmp, \irqnr, lsr #3
+ and \tmp, \tmp, #0xfc
+ add \tmp, \tmp, #0x280 /* get the register offset */
+ ldr \irqstat, [\base, \tmp] /* get the intc status */
+ cmp \irqstat, #0x0
+#endif
+1002:
.endm
.macro irq_prio_table
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index efe3281..ae07455 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -17,6 +17,7 @@
#include <asm-generic/gpio.h>
#include <mach/irqs.h>
+#include <mach/common.h>
#define DAVINCI_GPIO_BASE 0x01C67000
@@ -67,15 +68,16 @@ static inline struct gpio_controller *__iomem
__gpio_to_controller(unsigned gpio)
{
void *__iomem ptr;
+ void __iomem *base = davinci_soc_info.gpio_base;
if (gpio < 32 * 1)
- ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+ ptr = base + 0x10;
else if (gpio < 32 * 2)
- ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+ ptr = base + 0x38;
else if (gpio < 32 * 3)
- ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+ ptr = base + 0x60;
else if (gpio < 32 * 4)
- ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
+ ptr = base + 0x88;
else
ptr = NULL;
return ptr;
@@ -142,13 +144,13 @@ static inline int gpio_to_irq(unsigned gpio)
{
if (gpio >= DAVINCI_N_GPIO)
return -EINVAL;
- return DAVINCI_N_AINTC_IRQ + gpio;
+ return davinci_soc_info.intc_irq_num + gpio;
}
static inline int irq_to_gpio(unsigned irq)
{
/* caller guarantees gpio_to_irq() succeeded */
- return irq - DAVINCI_N_AINTC_IRQ;
+ return irq - davinci_soc_info.intc_irq_num;
}
#endif /* __DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 1806607..bc5d6aa 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -30,6 +30,9 @@
/* Base address */
#define DAVINCI_ARM_INTC_BASE 0x01C48000
+#define DAVINCI_INTC_TYPE_AINTC 0
+#define DAVINCI_INTC_TYPE_CP_INTC 1
+
/* Interrupt lines */
#define IRQ_VDINT0 0
#define IRQ_VDINT1 1
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index 86c25c7..c712c7c 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -21,7 +21,6 @@
* Definitions
**************************************************************************/
#define DAVINCI_DDR_BASE 0x80000000
-#define DAVINCI_IRAM_BASE 0x00008000 /* ARM Internal RAM */
#define PHYS_OFFSET DAVINCI_DDR_BASE
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
new file mode 100644
index 0000000..5a85e24
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/mmc.h
@@ -0,0 +1,33 @@
+/*
+ * Board-specific MMC configuration
+ */
+
+#ifndef _DAVINCI_MMC_H
+#define _DAVINCI_MMC_H
+
+#include <linux/types.h>
+#include <linux/mmc/host.h>
+
+struct davinci_mmc_config {
+ /* get_cd()/get_wp() may sleep */
+ int (*get_cd)(int module);
+ int (*get_ro)(int module);
+ /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
+ u8 wires;
+
+ u32 max_freq;
+
+ /* any additional host capabilities: OR'd in to mmc->f_caps */
+ u32 caps;
+
+ /* Version of the MMC/SD controller */
+ u8 version;
+};
+void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
+
+enum {
+ MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */
+ MMC_CTLR_VERSION_2, /* DA830 */
+};
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index bae22cb..2737845 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -19,16 +19,6 @@
#ifndef __INC_MACH_MUX_H
#define __INC_MACH_MUX_H
-/* System module registers */
-#define PINMUX0 0x00
-#define PINMUX1 0x04
-/* dm355 only */
-#define PINMUX2 0x08
-#define PINMUX3 0x0c
-#define PINMUX4 0x10
-#define INTMUX 0x18
-#define EVTMUX 0x1c
-
struct mux_config {
const char *name;
const char *mux_reg_name;
@@ -168,15 +158,9 @@ enum davinci_dm355_index {
#ifdef CONFIG_DAVINCI_MUX
/* setup pin muxing */
-extern void davinci_mux_init(void);
-extern int davinci_mux_register(const struct mux_config *pins,
- unsigned long size);
extern int davinci_cfg_reg(unsigned long reg_cfg);
#else
/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
-static inline void davinci_mux_init(void) {}
-static inline int davinci_mux_register(const struct mux_config *pins,
- unsigned long size) { return 0; }
static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
#endif
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 55a90d4..ab8a258 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -27,6 +27,8 @@
#ifndef __ASM_ARCH_PSC_H
#define __ASM_ARCH_PSC_H
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
+
/* Power and Sleep Controller (PSC) Domains */
#define DAVINCI_GPSC_ARMDOMAIN 0
#define DAVINCI_GPSC_DSPDOMAIN 1
@@ -116,8 +118,8 @@
#define DM646X_LPSC_TIMER1 35
#define DM646X_LPSC_ARM_INTC 45
-extern int davinci_psc_is_clk_active(unsigned int id);
-extern void davinci_psc_config(unsigned int domain, unsigned int id,
- char enable);
+extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
+extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
+ unsigned int id, char enable);
#endif /* __ASM_ARCH_PSC_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 632847d..794fa5c 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -18,8 +18,6 @@
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
-#define DM355_UART2_BASE (IO_PHYS + 0x206000)
-
/* DaVinci UART register offsets */
#define UART_DAVINCI_PWREMU 0x0c
#define UART_DM646X_SCR 0x10
@@ -30,6 +28,6 @@ struct davinci_uart_config {
unsigned int enabled_uarts;
};
-extern void davinci_serial_init(struct davinci_uart_config *);
+extern int davinci_serial_init(struct davinci_uart_config *);
#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h
new file mode 100644
index 0000000..111f7cc
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/sram.h
@@ -0,0 +1,27 @@
+/*
+ * mach/sram.h - DaVinci simple SRAM allocator
+ *
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACH_SRAM_H
+#define __MACH_SRAM_H
+
+/* ARBITRARY: SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY 512
+
+/*
+ * SRAM allocations return a CPU virtual address, or NULL on error.
+ * If a DMA address is requested and the SRAM supports DMA, its
+ * mapped address is also returned.
+ *
+ * Errors include SRAM memory not being available, and requesting
+ * DMA mapped SRAM on systems which don't allow that.
+ */
+extern void *sram_alloc(size_t len, dma_addr_t *dma);
+extern void sram_free(void *addr, size_t len);
+
+#endif /* __MACH_SRAM_H */
diff --git a/arch/arm/mach-davinci/include/mach/time.h b/arch/arm/mach-davinci/include/mach/time.h
new file mode 100644
index 0000000..1c971d8
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/time.h
@@ -0,0 +1,35 @@
+/*
+ * Local header file for DaVinci time code.
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ARCH_ARM_MACH_DAVINCI_TIME_H
+#define __ARCH_ARM_MACH_DAVINCI_TIME_H
+
+#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
+#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
+#define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00)
+
+enum {
+ T0_BOT,
+ T0_TOP,
+ T1_BOT,
+ T1_TOP,
+ NUM_TIMERS
+};
+
+#define IS_TIMER1(id) (id & 0x2)
+#define IS_TIMER0(id) (!IS_TIMER1(id))
+#define IS_TIMER_TOP(id) ((id & 0x1))
+#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id))
+
+#define ID_TO_TIMER(id) (IS_TIMER1(id) != 0)
+
+extern struct davinci_timer_instance davinci_timer_instance[];
+
+#endif /* __ARCH_ARM_MACH_DAVINCI_TIME_H */
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 8c165de..1e27475 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -13,11 +13,24 @@
#include <linux/serial_reg.h>
#include <mach/serial.h>
+#include <asm/mach-types.h>
+
+extern unsigned int __machine_arch_type;
+
+static u32 *uart;
+
+static u32 *get_uart_base(void)
+{
+ /* Add logic here for new platforms, using __macine_arch_type */
+ return (u32 *)DAVINCI_UART0_BASE;
+}
+
/* PORT_16C550A, in polled non-fifo mode */
static void putc(char c)
{
- volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+ if (!uart)
+ uart = get_uart_base();
while (!(uart[UART_LSR] & UART_LSR_THRE))
barrier();
@@ -26,7 +39,9 @@ static void putc(char c)
static inline void flush(void)
{
- volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+ if (!uart)
+ uart = get_uart_base();
+
while (!(uart[UART_LSR] & UART_LSR_THRE))
barrier();
}
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index a548abb..49912b4 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -9,47 +9,9 @@
*/
#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/io.h>
#include <asm/tlb.h>
-#include <asm/memory.h>
-
-#include <asm/mach/map.h>
-#include <mach/clock.h>
-
-extern void davinci_check_revision(void);
-
-/*
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- */
-static struct map_desc davinci_io_desc[] __initdata = {
- {
- .virtual = IO_VIRT,
- .pfn = __phys_to_pfn(IO_PHYS),
- .length = IO_SIZE,
- .type = MT_DEVICE
- },
-};
-
-void __init davinci_map_common_io(void)
-{
- iotable_init(davinci_io_desc, ARRAY_SIZE(davinci_io_desc));
-
- /* Normally devicemaps_init() would flush caches and tlb after
- * mdesc->map_io(), but we must also do it here because of the CPU
- * revision check below.
- */
- local_flush_tlb_all();
- flush_cache_all();
-
- /* We want to check CPU revision early for cpu_is_xxxx() macros.
- * IO space mapping must be initialized before we can do that.
- */
- davinci_check_revision();
-}
#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz)))
#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst)))
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 5a324c9..af92ffe 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -26,6 +26,7 @@
#include <mach/hardware.h>
#include <mach/cputype.h>
+#include <mach/common.h>
#include <asm/mach/irq.h>
#define IRQ_BIT(irq) ((irq) & 0x1f)
@@ -41,18 +42,14 @@
#define IRQ_INTPRI0_REG_OFFSET 0x0030
#define IRQ_INTPRI7_REG_OFFSET 0x004C
-const u8 *davinci_def_priorities;
-
-#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
-
static inline unsigned int davinci_irq_readl(int offset)
{
- return __raw_readl(INTC_BASE + offset);
+ return __raw_readl(davinci_intc_base + offset);
}
static inline void davinci_irq_writel(unsigned long value, int offset)
{
- __raw_writel(value, INTC_BASE + offset);
+ __raw_writel(value, davinci_intc_base + offset);
}
/* Disable interrupt */
@@ -113,217 +110,11 @@ static struct irq_chip davinci_irq_chip_0 = {
.unmask = davinci_unmask_irq,
};
-/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
- [IRQ_VDINT0] = 2,
- [IRQ_VDINT1] = 6,
- [IRQ_VDINT2] = 6,
- [IRQ_HISTINT] = 6,
- [IRQ_H3AINT] = 6,
- [IRQ_PRVUINT] = 6,
- [IRQ_RSZINT] = 6,
- [7] = 7,
- [IRQ_VENCINT] = 6,
- [IRQ_ASQINT] = 6,
- [IRQ_IMXINT] = 6,
- [IRQ_VLCDINT] = 6,
- [IRQ_USBINT] = 4,
- [IRQ_EMACINT] = 4,
- [14] = 7,
- [15] = 7,
- [IRQ_CCINT0] = 5, /* dma */
- [IRQ_CCERRINT] = 5, /* dma */
- [IRQ_TCERRINT0] = 5, /* dma */
- [IRQ_TCERRINT] = 5, /* dma */
- [IRQ_PSCIN] = 7,
- [21] = 7,
- [IRQ_IDE] = 4,
- [23] = 7,
- [IRQ_MBXINT] = 7,
- [IRQ_MBRINT] = 7,
- [IRQ_MMCINT] = 7,
- [IRQ_SDIOINT] = 7,
- [28] = 7,
- [IRQ_DDRINT] = 7,
- [IRQ_AEMIFINT] = 7,
- [IRQ_VLQINT] = 4,
- [IRQ_TINT0_TINT12] = 2, /* clockevent */
- [IRQ_TINT0_TINT34] = 2, /* clocksource */
- [IRQ_TINT1_TINT12] = 7, /* DSP timer */
- [IRQ_TINT1_TINT34] = 7, /* system tick */
- [IRQ_PWMINT0] = 7,
- [IRQ_PWMINT1] = 7,
- [IRQ_PWMINT2] = 7,
- [IRQ_I2C] = 3,
- [IRQ_UARTINT0] = 3,
- [IRQ_UARTINT1] = 3,
- [IRQ_UARTINT2] = 3,
- [IRQ_SPINT0] = 3,
- [IRQ_SPINT1] = 3,
- [45] = 7,
- [IRQ_DSP2ARM0] = 4,
- [IRQ_DSP2ARM1] = 4,
- [IRQ_GPIO0] = 7,
- [IRQ_GPIO1] = 7,
- [IRQ_GPIO2] = 7,
- [IRQ_GPIO3] = 7,
- [IRQ_GPIO4] = 7,
- [IRQ_GPIO5] = 7,
- [IRQ_GPIO6] = 7,
- [IRQ_GPIO7] = 7,
- [IRQ_GPIOBNK0] = 7,
- [IRQ_GPIOBNK1] = 7,
- [IRQ_GPIOBNK2] = 7,
- [IRQ_GPIOBNK3] = 7,
- [IRQ_GPIOBNK4] = 7,
- [IRQ_COMMTX] = 7,
- [IRQ_COMMRX] = 7,
- [IRQ_EMUINT] = 7,
-};
-
-static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
- [IRQ_DM646X_VP_VERTINT0] = 7,
- [IRQ_DM646X_VP_VERTINT1] = 7,
- [IRQ_DM646X_VP_VERTINT2] = 7,
- [IRQ_DM646X_VP_VERTINT3] = 7,
- [IRQ_DM646X_VP_ERRINT] = 7,
- [IRQ_DM646X_RESERVED_1] = 7,
- [IRQ_DM646X_RESERVED_2] = 7,
- [IRQ_DM646X_WDINT] = 7,
- [IRQ_DM646X_CRGENINT0] = 7,
- [IRQ_DM646X_CRGENINT1] = 7,
- [IRQ_DM646X_TSIFINT0] = 7,
- [IRQ_DM646X_TSIFINT1] = 7,
- [IRQ_DM646X_VDCEINT] = 7,
- [IRQ_DM646X_USBINT] = 7,
- [IRQ_DM646X_USBDMAINT] = 7,
- [IRQ_DM646X_PCIINT] = 7,
- [IRQ_CCINT0] = 7, /* dma */
- [IRQ_CCERRINT] = 7, /* dma */
- [IRQ_TCERRINT0] = 7, /* dma */
- [IRQ_TCERRINT] = 7, /* dma */
- [IRQ_DM646X_TCERRINT2] = 7,
- [IRQ_DM646X_TCERRINT3] = 7,
- [IRQ_DM646X_IDE] = 7,
- [IRQ_DM646X_HPIINT] = 7,
- [IRQ_DM646X_EMACRXTHINT] = 7,
- [IRQ_DM646X_EMACRXINT] = 7,
- [IRQ_DM646X_EMACTXINT] = 7,
- [IRQ_DM646X_EMACMISCINT] = 7,
- [IRQ_DM646X_MCASP0TXINT] = 7,
- [IRQ_DM646X_MCASP0RXINT] = 7,
- [IRQ_AEMIFINT] = 7,
- [IRQ_DM646X_RESERVED_3] = 7,
- [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
- [IRQ_TINT0_TINT34] = 7, /* clocksource */
- [IRQ_TINT1_TINT12] = 7, /* DSP timer */
- [IRQ_TINT1_TINT34] = 7, /* system tick */
- [IRQ_PWMINT0] = 7,
- [IRQ_PWMINT1] = 7,
- [IRQ_DM646X_VLQINT] = 7,
- [IRQ_I2C] = 7,
- [IRQ_UARTINT0] = 7,
- [IRQ_UARTINT1] = 7,
- [IRQ_DM646X_UARTINT2] = 7,
- [IRQ_DM646X_SPINT0] = 7,
- [IRQ_DM646X_SPINT1] = 7,
- [IRQ_DM646X_DSP2ARMINT] = 7,
- [IRQ_DM646X_RESERVED_4] = 7,
- [IRQ_DM646X_PSCINT] = 7,
- [IRQ_DM646X_GPIO0] = 7,
- [IRQ_DM646X_GPIO1] = 7,
- [IRQ_DM646X_GPIO2] = 7,
- [IRQ_DM646X_GPIO3] = 7,
- [IRQ_DM646X_GPIO4] = 7,
- [IRQ_DM646X_GPIO5] = 7,
- [IRQ_DM646X_GPIO6] = 7,
- [IRQ_DM646X_GPIO7] = 7,
- [IRQ_DM646X_GPIOBNK0] = 7,
- [IRQ_DM646X_GPIOBNK1] = 7,
- [IRQ_DM646X_GPIOBNK2] = 7,
- [IRQ_DM646X_DDRINT] = 7,
- [IRQ_DM646X_AEMIFINT] = 7,
- [IRQ_COMMTX] = 7,
- [IRQ_COMMRX] = 7,
- [IRQ_EMUINT] = 7,
-};
-
-static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
- [IRQ_DM355_CCDC_VDINT0] = 2,
- [IRQ_DM355_CCDC_VDINT1] = 6,
- [IRQ_DM355_CCDC_VDINT2] = 6,
- [IRQ_DM355_IPIPE_HST] = 6,
- [IRQ_DM355_H3AINT] = 6,
- [IRQ_DM355_IPIPE_SDR] = 6,
- [IRQ_DM355_IPIPEIFINT] = 6,
- [IRQ_DM355_OSDINT] = 7,
- [IRQ_DM355_VENCINT] = 6,
- [IRQ_ASQINT] = 6,
- [IRQ_IMXINT] = 6,
- [IRQ_USBINT] = 4,
- [IRQ_DM355_RTOINT] = 4,
- [IRQ_DM355_UARTINT2] = 7,
- [IRQ_DM355_TINT6] = 7,
- [IRQ_CCINT0] = 5, /* dma */
- [IRQ_CCERRINT] = 5, /* dma */
- [IRQ_TCERRINT0] = 5, /* dma */
- [IRQ_TCERRINT] = 5, /* dma */
- [IRQ_DM355_SPINT2_1] = 7,
- [IRQ_DM355_TINT7] = 4,
- [IRQ_DM355_SDIOINT0] = 7,
- [IRQ_MBXINT] = 7,
- [IRQ_MBRINT] = 7,
- [IRQ_MMCINT] = 7,
- [IRQ_DM355_MMCINT1] = 7,
- [IRQ_DM355_PWMINT3] = 7,
- [IRQ_DDRINT] = 7,
- [IRQ_AEMIFINT] = 7,
- [IRQ_DM355_SDIOINT1] = 4,
- [IRQ_TINT0_TINT12] = 2, /* clockevent */
- [IRQ_TINT0_TINT34] = 2, /* clocksource */
- [IRQ_TINT1_TINT12] = 7, /* DSP timer */
- [IRQ_TINT1_TINT34] = 7, /* system tick */
- [IRQ_PWMINT0] = 7,
- [IRQ_PWMINT1] = 7,
- [IRQ_PWMINT2] = 7,
- [IRQ_I2C] = 3,
- [IRQ_UARTINT0] = 3,
- [IRQ_UARTINT1] = 3,
- [IRQ_DM355_SPINT0_0] = 3,
- [IRQ_DM355_SPINT0_1] = 3,
- [IRQ_DM355_GPIO0] = 3,
- [IRQ_DM355_GPIO1] = 7,
- [IRQ_DM355_GPIO2] = 4,
- [IRQ_DM355_GPIO3] = 4,
- [IRQ_DM355_GPIO4] = 7,
- [IRQ_DM355_GPIO5] = 7,
- [IRQ_DM355_GPIO6] = 7,
- [IRQ_DM355_GPIO7] = 7,
- [IRQ_DM355_GPIO8] = 7,
- [IRQ_DM355_GPIO9] = 7,
- [IRQ_DM355_GPIOBNK0] = 7,
- [IRQ_DM355_GPIOBNK1] = 7,
- [IRQ_DM355_GPIOBNK2] = 7,
- [IRQ_DM355_GPIOBNK3] = 7,
- [IRQ_DM355_GPIOBNK4] = 7,
- [IRQ_DM355_GPIOBNK5] = 7,
- [IRQ_DM355_GPIOBNK6] = 7,
- [IRQ_COMMTX] = 7,
- [IRQ_COMMRX] = 7,
- [IRQ_EMUINT] = 7,
-};
-
/* ARM Interrupt Controller Initialization */
void __init davinci_irq_init(void)
{
unsigned i;
-
- if (cpu_is_davinci_dm644x())
- davinci_def_priorities = dm644x_default_priorities;
- else if (cpu_is_davinci_dm646x())
- davinci_def_priorities = dm646x_default_priorities;
- else if (cpu_is_davinci_dm355())
- davinci_def_priorities = dm355_default_priorities;
+ const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios;
/* Clear all interrupt requests */
davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index bbba0b2..d310f57 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -21,18 +21,7 @@
#include <mach/hardware.h>
#include <mach/mux.h>
-
-static const struct mux_config *mux_table;
-static unsigned long pin_table_sz;
-
-int __init davinci_mux_register(const struct mux_config *pins,
- unsigned long size)
-{
- mux_table = pins;
- pin_table_sz = size;
-
- return 0;
-}
+#include <mach/common.h>
/*
* Sets the DAVINCI MUX register based on the table
@@ -40,23 +29,24 @@ int __init davinci_mux_register(const struct mux_config *pins,
int __init_or_module davinci_cfg_reg(const unsigned long index)
{
static DEFINE_SPINLOCK(mux_spin_lock);
- void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ void __iomem *base = soc_info->pinmux_base;
unsigned long flags;
const struct mux_config *cfg;
unsigned int reg_orig = 0, reg = 0;
unsigned int mask, warn = 0;
- if (!mux_table)
+ if (!soc_info->pinmux_pins)
BUG();
- if (index >= pin_table_sz) {
+ if (index >= soc_info->pinmux_pins_num) {
printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
- index, pin_table_sz);
+ index, soc_info->pinmux_pins_num);
dump_stack();
return -ENODEV;
}
- cfg = &mux_table[index];
+ cfg = &soc_info->pinmux_pins[index];
if (cfg->name == NULL) {
printk(KERN_ERR "No entry for the specified index\n");
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 84171ab..a78b657 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -28,8 +28,6 @@
#include <mach/psc.h>
#include <mach/mux.h>
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
-
/* PSC register offsets */
#define EPCPR 0x070
#define PTCMD 0x120
@@ -42,22 +40,42 @@
#define MDSTAT_STATE_MASK 0x1f
/* Return nonzero iff the domain's clock is active */
-int __init davinci_psc_is_clk_active(unsigned int id)
+int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
{
- void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
- u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+ void __iomem *psc_base;
+ u32 mdstat;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
+ pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
+ (int)soc_info->psc_bases, ctlr);
+ return 0;
+ }
+
+ psc_base = soc_info->psc_bases[ctlr];
+ mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
/* if clocked, state can be "Enable" or "SyncReset" */
return mdstat & BIT(12);
}
/* Enable or disable a PSC domain */
-void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
+void davinci_psc_config(unsigned int domain, unsigned int ctlr,
+ unsigned int id, char enable)
{
u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
- void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+ void __iomem *psc_base;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
+ if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
+ pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
+ (int)soc_info->psc_bases, ctlr);
+ return;
+ }
+
+ psc_base = soc_info->psc_bases[ctlr];
+
mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
mdctl &= ~MDSTAT_STATE_MASK;
mdctl |= next_state;
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 6950757..c530c73 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -33,6 +33,8 @@
#include <mach/serial.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
+#include <mach/common.h>
+
#include "clock.h"
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
@@ -49,44 +51,6 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
__raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
}
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .mapbase = DAVINCI_UART0_BASE,
- .irq = IRQ_UARTINT0,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .mapbase = DAVINCI_UART1_BASE,
- .irq = IRQ_UARTINT1,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .mapbase = DAVINCI_UART2_BASE,
- .irq = IRQ_UARTINT2,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .flags = 0
- },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
static void __init davinci_serial_reset(struct plat_serial8250_port *p)
{
unsigned int pwremu = 0;
@@ -106,35 +70,22 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p)
UART_DM646X_SCR_TX_WATERMARK);
}
-void __init davinci_serial_init(struct davinci_uart_config *info)
+int __init davinci_serial_init(struct davinci_uart_config *info)
{
int i;
char name[16];
struct clk *uart_clk;
- struct device *dev = &serial_device.dev;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ struct device *dev = &soc_info->serial_dev->dev;
+ struct plat_serial8250_port *p = dev->platform_data;
/*
* Make sure the serial ports are muxed on at this point.
- * You have to mux them off in device drivers later on
- * if not needed.
+ * You have to mux them off in device drivers later on if not needed.
*/
- for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
- struct plat_serial8250_port *p = serial_platform_data + i;
-
- if (!(info->enabled_uarts & (1 << i))) {
- p->flags = 0;
+ for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++, p++) {
+ if (!(info->enabled_uarts & (1 << i)))
continue;
- }
-
- if (cpu_is_davinci_dm646x())
- p->iotype = UPIO_MEM32;
-
- if (cpu_is_davinci_dm355()) {
- if (i == 2) {
- p->mapbase = (unsigned long)DM355_UART2_BASE;
- p->irq = IRQ_DM355_UARTINT2;
- }
- }
sprintf(name, "uart%d", i);
uart_clk = clk_get(dev, name);
@@ -147,11 +98,6 @@ void __init davinci_serial_init(struct davinci_uart_config *info)
davinci_serial_reset(p);
}
}
-}
-static int __init davinci_init(void)
-{
- return platform_device_register(&serial_device);
+ return platform_device_register(soc_info->serial_dev);
}
-
-arch_initcall(davinci_init);
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
new file mode 100644
index 0000000..db54b2a
--- /dev/null
+++ b/arch/arm/mach-davinci/sram.c
@@ -0,0 +1,74 @@
+/*
+ * mach-davinci/sram.c - DaVinci simple SRAM allocator
+ *
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/genalloc.h>
+
+#include <mach/common.h>
+#include <mach/memory.h>
+#include <mach/sram.h>
+
+
+static struct gen_pool *sram_pool;
+
+void *sram_alloc(size_t len, dma_addr_t *dma)
+{
+ unsigned long vaddr;
+ dma_addr_t dma_base = davinci_soc_info.sram_dma;
+
+ if (dma)
+ *dma = 0;
+ if (!sram_pool || (dma && !dma_base))
+ return NULL;
+
+ vaddr = gen_pool_alloc(sram_pool, len);
+ if (!vaddr)
+ return NULL;
+
+ if (dma)
+ *dma = dma_base + (vaddr - SRAM_VIRT);
+ return (void *)vaddr;
+
+}
+EXPORT_SYMBOL(sram_alloc);
+
+void sram_free(void *addr, size_t len)
+{
+ gen_pool_free(sram_pool, (unsigned long) addr, len);
+}
+EXPORT_SYMBOL(sram_free);
+
+
+/*
+ * REVISIT This supports CPU and DMA access to/from SRAM, but it
+ * doesn't (yet?) support some other notable uses of SRAM: as TCM
+ * for data and/or instructions; and holding code needed to enter
+ * and exit suspend states (while DRAM can't be used).
+ */
+static int __init sram_init(void)
+{
+ unsigned len = davinci_soc_info.sram_len;
+ int status = 0;
+
+ if (len) {
+ len = min(len, SRAM_SIZE);
+ sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1);
+ if (!sram_pool)
+ status = -ENOMEM;
+ }
+ if (sram_pool)
+ status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1);
+ WARN_ON(status < 0);
+ return status;
+}
+core_initcall(sram_init);
+
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 494e01b..0884ca5 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -19,6 +19,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/device.h>
+#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <asm/system.h>
@@ -28,52 +29,41 @@
#include <asm/errno.h>
#include <mach/io.h>
#include <mach/cputype.h>
+#include <mach/time.h>
#include "clock.h"
static struct clock_event_device clockevent_davinci;
static unsigned int davinci_clock_tick_rate;
-#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
-#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
-#define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00)
-
-enum {
- T0_BOT = 0, T0_TOP, T1_BOT, T1_TOP, NUM_TIMERS,
-};
-
-#define IS_TIMER1(id) (id & 0x2)
-#define IS_TIMER0(id) (!IS_TIMER1(id))
-#define IS_TIMER_TOP(id) ((id & 0x1))
-#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id))
-
-static int timer_irqs[NUM_TIMERS] = {
- IRQ_TINT0_TINT12,
- IRQ_TINT0_TINT34,
- IRQ_TINT1_TINT12,
- IRQ_TINT1_TINT34,
-};
-
/*
* This driver configures the 2 64-bit count-up timers as 4 independent
* 32-bit count-up timers used as follows:
- *
- * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
- * T0_TOP: Timer 0, top : clocksource for generic timekeeping
- * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
- * T1_TOP: Timer 1, top : <unused>
*/
-#define TID_CLOCKEVENT T0_BOT
-#define TID_CLOCKSOURCE T0_TOP
+
+enum {
+ TID_CLOCKEVENT,
+ TID_CLOCKSOURCE,
+};
/* Timer register offsets */
-#define PID12 0x0
-#define TIM12 0x10
-#define TIM34 0x14
-#define PRD12 0x18
-#define PRD34 0x1c
-#define TCR 0x20
-#define TGCR 0x24
-#define WDTCR 0x28
+#define PID12 0x0
+#define TIM12 0x10
+#define TIM34 0x14
+#define PRD12 0x18
+#define PRD34 0x1c
+#define TCR 0x20
+#define TGCR 0x24
+#define WDTCR 0x28
+
+/* Offsets of the 8 compare registers */
+#define CMP12_0 0x60
+#define CMP12_1 0x64
+#define CMP12_2 0x68
+#define CMP12_3 0x6c
+#define CMP12_4 0x70
+#define CMP12_5 0x74
+#define CMP12_6 0x78
+#define CMP12_7 0x7c
/* Timer register bitfields */
#define TCR_ENAMODE_DISABLE 0x0
@@ -105,6 +95,7 @@ struct timer_s {
unsigned int id;
unsigned long period;
unsigned long opts;
+ unsigned long flags;
void __iomem *base;
unsigned long tim_off;
unsigned long prd_off;
@@ -114,30 +105,58 @@ struct timer_s {
static struct timer_s timers[];
/* values for 'opts' field of struct timer_s */
-#define TIMER_OPTS_DISABLED 0x00
-#define TIMER_OPTS_ONESHOT 0x01
-#define TIMER_OPTS_PERIODIC 0x02
+#define TIMER_OPTS_DISABLED 0x01
+#define TIMER_OPTS_ONESHOT 0x02
+#define TIMER_OPTS_PERIODIC 0x04
+#define TIMER_OPTS_STATE_MASK 0x07
+
+#define TIMER_OPTS_USE_COMPARE 0x80000000
+#define USING_COMPARE(t) ((t)->opts & TIMER_OPTS_USE_COMPARE)
+
+static char *id_to_name[] = {
+ [T0_BOT] = "timer0_0",
+ [T0_TOP] = "timer0_1",
+ [T1_BOT] = "timer1_0",
+ [T1_TOP] = "timer1_1",
+};
static int timer32_config(struct timer_s *t)
{
- u32 tcr = __raw_readl(t->base + TCR);
-
- /* disable timer */
- tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
- __raw_writel(tcr, t->base + TCR);
-
- /* reset counter to zero, set new period */
- __raw_writel(0, t->base + t->tim_off);
- __raw_writel(t->period, t->base + t->prd_off);
-
- /* Set enable mode */
- if (t->opts & TIMER_OPTS_ONESHOT) {
- tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
- } else if (t->opts & TIMER_OPTS_PERIODIC) {
- tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+ u32 tcr;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ if (USING_COMPARE(t)) {
+ struct davinci_timer_instance *dtip =
+ soc_info->timer_info->timers;
+ int event_timer = ID_TO_TIMER(timers[TID_CLOCKEVENT].id);
+
+ /*
+ * Next interrupt should be the current time reg value plus
+ * the new period (using 32-bit unsigned addition/wrapping
+ * to 0 on overflow). This assumes that the clocksource
+ * is setup to count to 2^32-1 before wrapping around to 0.
+ */
+ __raw_writel(__raw_readl(t->base + t->tim_off) + t->period,
+ t->base + dtip[event_timer].cmp_off);
+ } else {
+ tcr = __raw_readl(t->base + TCR);
+
+ /* disable timer */
+ tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
+ __raw_writel(tcr, t->base + TCR);
+
+ /* reset counter to zero, set new period */
+ __raw_writel(0, t->base + t->tim_off);
+ __raw_writel(t->period, t->base + t->prd_off);
+
+ /* Set enable mode */
+ if (t->opts & TIMER_OPTS_ONESHOT)
+ tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
+ else if (t->opts & TIMER_OPTS_PERIODIC)
+ tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+
+ __raw_writel(tcr, t->base + TCR);
}
-
- __raw_writel(tcr, t->base + TCR);
return 0;
}
@@ -182,13 +201,14 @@ static struct timer_s timers[] = {
static void __init timer_init(void)
{
- u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ struct davinci_timer_instance *dtip = soc_info->timer_info->timers;
int i;
/* Global init of each 64-bit timer as a whole */
for(i=0; i<2; i++) {
u32 tgcr;
- void __iomem *base = IO_ADDRESS(phys_bases[i]);
+ void __iomem *base = dtip[i].base;
/* Disabled, Internal clock source */
__raw_writel(0, base + TCR);
@@ -214,33 +234,33 @@ static void __init timer_init(void)
/* Init of each timer as a 32-bit timer */
for (i=0; i< ARRAY_SIZE(timers); i++) {
struct timer_s *t = &timers[i];
- u32 phys_base;
-
- if (t->name) {
- t->id = i;
- phys_base = (IS_TIMER1(t->id) ?
- DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
- t->base = IO_ADDRESS(phys_base);
-
- if (IS_TIMER_BOT(t->id)) {
- t->enamode_shift = 6;
- t->tim_off = TIM12;
- t->prd_off = PRD12;
- } else {
- t->enamode_shift = 22;
- t->tim_off = TIM34;
- t->prd_off = PRD34;
- }
-
- /* Register interrupt */
- t->irqaction.name = t->name;
- t->irqaction.dev_id = (void *)t;
- if (t->irqaction.handler != NULL) {
- setup_irq(timer_irqs[t->id], &t->irqaction);
- }
-
- timer32_config(&timers[i]);
+ int timer = ID_TO_TIMER(t->id);
+ u32 irq;
+
+ t->base = dtip[timer].base;
+
+ if (IS_TIMER_BOT(t->id)) {
+ t->enamode_shift = 6;
+ t->tim_off = TIM12;
+ t->prd_off = PRD12;
+ irq = dtip[timer].bottom_irq;
+ } else {
+ t->enamode_shift = 22;
+ t->tim_off = TIM34;
+ t->prd_off = PRD34;
+ irq = dtip[timer].top_irq;
+ }
+
+ /* Register interrupt */
+ t->irqaction.name = t->name;
+ t->irqaction.dev_id = (void *)t;
+
+ if (t->irqaction.handler != NULL) {
+ irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
+ setup_irq(irq, &t->irqaction);
}
+
+ timer32_config(&timers[i]);
}
}
@@ -255,7 +275,6 @@ static cycle_t read_cycles(struct clocksource *cs)
}
static struct clocksource clocksource_davinci = {
- .name = "timer0_1",
.rating = 300,
.read = read_cycles,
.mask = CLOCKSOURCE_MASK(32),
@@ -284,15 +303,18 @@ static void davinci_set_mode(enum clock_event_mode mode,
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
t->period = davinci_clock_tick_rate / (HZ);
- t->opts = TIMER_OPTS_PERIODIC;
+ t->opts &= ~TIMER_OPTS_STATE_MASK;
+ t->opts |= TIMER_OPTS_PERIODIC;
timer32_config(t);
break;
case CLOCK_EVT_MODE_ONESHOT:
- t->opts = TIMER_OPTS_ONESHOT;
+ t->opts &= ~TIMER_OPTS_STATE_MASK;
+ t->opts |= TIMER_OPTS_ONESHOT;
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
- t->opts = TIMER_OPTS_DISABLED;
+ t->opts &= ~TIMER_OPTS_STATE_MASK;
+ t->opts |= TIMER_OPTS_DISABLED;
break;
case CLOCK_EVT_MODE_RESUME:
break;
@@ -300,7 +322,6 @@ static void davinci_set_mode(enum clock_event_mode mode,
}
static struct clock_event_device clockevent_davinci = {
- .name = "timer0_0",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.set_next_event = davinci_set_next_event,
@@ -311,10 +332,42 @@ static struct clock_event_device clockevent_davinci = {
static void __init davinci_timer_init(void)
{
struct clk *timer_clk;
-
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ unsigned int clockevent_id;
+ unsigned int clocksource_id;
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
+ clockevent_id = soc_info->timer_info->clockevent_id;
+ clocksource_id = soc_info->timer_info->clocksource_id;
+
+ timers[TID_CLOCKEVENT].id = clockevent_id;
+ timers[TID_CLOCKSOURCE].id = clocksource_id;
+
+ /*
+ * If using same timer for both clock events & clocksource,
+ * a compare register must be used to generate an event interrupt.
+ * This is equivalent to a oneshot timer only (not periodic).
+ */
+ if (clockevent_id == clocksource_id) {
+ struct davinci_timer_instance *dtip =
+ soc_info->timer_info->timers;
+ int event_timer = ID_TO_TIMER(clockevent_id);
+
+ /* Only bottom timers can use compare regs */
+ if (IS_TIMER_TOP(clockevent_id))
+ pr_warning("davinci_timer_init: Invalid use"
+ " of system timers. Results unpredictable.\n");
+ else if ((dtip[event_timer].cmp_off == 0)
+ || (dtip[event_timer].cmp_irq == 0))
+ pr_warning("davinci_timer_init: Invalid timer instance"
+ " setup. Results unpredictable.\n");
+ else {
+ timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE;
+ clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT;
+ }
+ }
+
/* init timer hw */
timer_init();
@@ -325,6 +378,7 @@ static void __init davinci_timer_init(void)
davinci_clock_tick_rate = clk_get_rate(timer_clk);
/* setup clocksource */
+ clocksource_davinci.name = id_to_name[clocksource_id];
clocksource_davinci.mult =
clocksource_khz2mult(davinci_clock_tick_rate/1000,
clocksource_davinci.shift);
@@ -332,12 +386,12 @@ static void __init davinci_timer_init(void)
printk(err, clocksource_davinci.name);
/* setup clockevent */
+ clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
clockevent_davinci.shift);
clockevent_davinci.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
- clockevent_davinci.min_delta_ns =
- clockevent_delta2ns(1, &clockevent_davinci);
+ clockevent_davinci.min_delta_ns = 50000; /* 50 usec */
clockevent_davinci.cpumask = cpumask_of(0);
clockevents_register_device(&clockevent_davinci);
@@ -349,15 +403,14 @@ struct sys_timer davinci_timer = {
/* reset board using watchdog timer */
-void davinci_watchdog_reset(void) {
+void davinci_watchdog_reset(void)
+{
u32 tgcr, wdtcr;
- void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
- struct device dev;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ void __iomem *base = soc_info->wdt_base;
struct clk *wd_clk;
- char *name = "watchdog";
- dev_set_name(&dev, name);
- wd_clk = clk_get(&dev, NULL);
+ wd_clk = clk_get(&davinci_wdt_device.dev, NULL);
if (WARN_ON(IS_ERR(wd_clk)))
return;
clk_enable(wd_clk);
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 56bddce..d7291c6 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -9,87 +9,135 @@ config CRUNCH
comment "EP93xx Platforms"
+choice
+ prompt "EP93xx first SDRAM bank selection"
+ default EP93XX_SDCE3_SYNC_PHYS_OFFSET
+
+config EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ bool "0x00000000 - SDCE3/SyncBoot"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0x00000000
+
+config EP93XX_SDCE0_PHYS_OFFSET
+ bool "0xc0000000 - SDCEO"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0xc0000000
+
+endchoice
+
config MACH_ADSSPHERE
bool "Support ADS Sphere"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the ADS
Sphere board.
+config MACH_EDB93XX
+ bool
+
+config MACH_EDB9301
+ bool "Support Cirrus Logic EDB9301"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_EDB93XX
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9301 Evaluation Board.
+
config MACH_EDB9302
bool "Support Cirrus Logic EDB9302"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9302 Evaluation Board.
config MACH_EDB9302A
bool "Support Cirrus Logic EDB9302A"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9302A Evaluation Board.
config MACH_EDB9307
bool "Support Cirrus Logic EDB9307"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9307 Evaluation Board.
config MACH_EDB9307A
bool "Support Cirrus Logic EDB9307A"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9307A Evaluation Board.
config MACH_EDB9312
bool "Support Cirrus Logic EDB9312"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9312 Evaluation Board.
config MACH_EDB9315
bool "Support Cirrus Logic EDB9315"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9315 Evaluation Board.
config MACH_EDB9315A
bool "Support Cirrus Logic EDB9315A"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9315A Evaluation Board.
config MACH_GESBC9312
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
bool "Support Glomation GESBC-9312-sx"
help
Say 'Y' here if you want your kernel to support the Glomation
GESBC-9312-sx board.
config MACH_MICRO9
- bool
- default n
+ bool
config MACH_MICRO9H
- bool "Support Contec Hypercontrol Micro9-H"
- select MACH_MICRO9
- help
- Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-H board.
+ bool "Support Contec Hypercontrol Micro9-H"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Hypercontrol Micro9-H board.
config MACH_MICRO9M
- bool "Support Contec Hypercontrol Micro9-M"
- select MACH_MICRO9
- help
- Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-M board.
+ bool "Support Contec Hypercontrol Micro9-M"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Hypercontrol Micro9-M board.
config MACH_MICRO9L
- bool "Support Contec Hypercontrol Micro9-L"
- select MACH_MICRO9
- help
- Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-L board.
+ bool "Support Contec Hypercontrol Micro9-L"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Hypercontrol Micro9-L board.
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-72xx board.
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 9522e20..eae6199 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -7,13 +7,7 @@ obj-n :=
obj- :=
obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o
-obj-$(CONFIG_MACH_EDB9302) += edb9302.o
-obj-$(CONFIG_MACH_EDB9302A) += edb9302a.o
-obj-$(CONFIG_MACH_EDB9307) += edb9307.o
-obj-$(CONFIG_MACH_EDB9307A) += edb9307a.o
-obj-$(CONFIG_MACH_EDB9312) += edb9312.o
-obj-$(CONFIG_MACH_EDB9315) += edb9315.o
-obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o
+obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
obj-$(CONFIG_MACH_MICRO9) += micro9.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
index d5561ad..27a085a 100644
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -1,2 +1,5 @@
- zreladdr-y := 0x00008000
-params_phys-y := 0x00000100
+ zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00008000
+params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100
+
+ zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000
+params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index b2eede5..6c4c163 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -72,58 +72,58 @@ static struct clk clk_h;
static struct clk clk_p;
static struct clk clk_pll2;
static struct clk clk_usb_host = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = EP93XX_SYSCON_CLOCK_USH_EN,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN,
};
/* DMA Clocks */
static struct clk clk_m2p0 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00020000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P0,
};
static struct clk clk_m2p1 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00010000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P1,
};
static struct clk clk_m2p2 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00080000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P2,
};
static struct clk clk_m2p3 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00040000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P3,
};
static struct clk clk_m2p4 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00200000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P4,
};
static struct clk clk_m2p5 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00100000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P5,
};
static struct clk clk_m2p6 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00800000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P6,
};
static struct clk clk_m2p7 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00400000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P7,
};
static struct clk clk_m2p8 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x02000000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P8,
};
static struct clk clk_m2p9 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x01000000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P9,
};
static struct clk clk_m2m0 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x04000000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M0,
};
static struct clk clk_m2m1 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x08000000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M1,
};
#define INIT_CK(dev,con,ck) \
@@ -138,7 +138,7 @@ static struct clk_lookup clocks[] = {
INIT_CK(NULL, "hclk", &clk_h),
INIT_CK(NULL, "pclk", &clk_p),
INIT_CK(NULL, "pll2", &clk_pll2),
- INIT_CK(NULL, "usb_host", &clk_usb_host),
+ INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
INIT_CK(NULL, "m2p0", &clk_m2p0),
INIT_CK(NULL, "m2p1", &clk_m2p1),
INIT_CK(NULL, "m2p2", &clk_m2p2),
@@ -186,8 +186,8 @@ static unsigned long get_uart_rate(struct clk *clk)
{
u32 value;
- value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL);
- if (value & EP93XX_SYSCON_CLOCK_UARTBAUD)
+ value = __raw_readl(EP93XX_SYSCON_PWRCNT);
+ if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
return EP93XX_EXT_CLK_RATE;
else
return EP93XX_EXT_CLK_RATE / 2;
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index ae24486..204dc5c 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -155,7 +155,7 @@ static unsigned char gpio_int_unmasked[3];
static unsigned char gpio_int_enabled[3];
static unsigned char gpio_int_type1[3];
static unsigned char gpio_int_type2[3];
-static unsigned char gpio_int_debouce[3];
+static unsigned char gpio_int_debounce[3];
/* Port ordering is: A B F */
static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
@@ -192,11 +192,11 @@ void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
int port_mask = 1 << (line & 7);
if (enable)
- gpio_int_debouce[port] |= port_mask;
+ gpio_int_debounce[port] |= port_mask;
else
- gpio_int_debouce[port] &= ~port_mask;
+ gpio_int_debounce[port] &= ~port_mask;
- __raw_writeb(gpio_int_debouce[port],
+ __raw_writeb(gpio_int_debounce[port],
EP93XX_GPIO_REG(int_debounce_register_offset[port]));
}
EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
@@ -362,8 +362,8 @@ void __init ep93xx_init_irq(void)
{
int gpio_irq;
- vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
- vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
+ vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+ vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
for (gpio_irq = gpio_to_irq(0);
gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
@@ -450,10 +450,19 @@ static struct amba_device uart3_device = {
};
+static struct resource ep93xx_rtc_resource[] = {
+ {
+ .start = EP93XX_RTC_PHYS_BASE,
+ .end = EP93XX_RTC_PHYS_BASE + 0x10c - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct platform_device ep93xx_rtc_device = {
- .name = "ep93xx-rtc",
- .id = -1,
- .num_resources = 0,
+ .name = "ep93xx-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_rtc_resource),
+ .resource = ep93xx_rtc_resource,
};
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
deleted file mode 100644
index 8bf8d7c..0000000
--- a/arch/arm/mach-ep93xx/edb9302.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9302.c
- * Cirrus Logic EDB9302 support.
- *
- * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9302_flash_data = {
- .width = 2,
-};
-
-static struct resource edb9302_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9302_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9302_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9302_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9302_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9302_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9302_flash);
-
- ep93xx_register_eth(&edb9302_eth_data, 1);
-}
-
-MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
- /* Maintainer: George Kashperko <george@chas.com.ua> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9302_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c
deleted file mode 100644
index a352c57..0000000
--- a/arch/arm/mach-ep93xx/edb9302a.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9302a.c
- * Cirrus Logic EDB9302A support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9302a_flash_data = {
- .width = 2,
-};
-
-static struct resource edb9302a_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9302a_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9302a_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9302a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9302a_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9302a_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9302a_flash);
-
- ep93xx_register_eth(&edb9302a_eth_data, 1);
-}
-
-MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9302a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c
deleted file mode 100644
index 5ab22f6..0000000
--- a/arch/arm/mach-ep93xx/edb9307.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9307.c
- * Cirrus Logic EDB9307 support.
- *
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9307_flash_data = {
- .width = 4,
-};
-
-static struct resource edb9307_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9307_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9307_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9307_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9307_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9307_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9307_flash);
-
- ep93xx_register_eth(&edb9307_eth_data, 1);
-}
-
-MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
- /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9307_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9307a.c b/arch/arm/mach-ep93xx/edb9307a.c
deleted file mode 100644
index 6171167..0000000
--- a/arch/arm/mach-ep93xx/edb9307a.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9307a.c
- * Cirrus Logic EDB9307A support.
- *
- * Copyright (C) 2008 H Hartley Sweeten <hsweeten@visionengravers.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9307a_flash_data = {
- .width = 2,
-};
-
-static struct resource edb9307a_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9307a_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9307a_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9307a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9307a_eth_data = {
- .phy_id = 1,
-};
-
-static struct i2c_board_info __initdata edb9307a_i2c_data[] = {
- {
- /* On-board battery backed RTC */
- I2C_BOARD_INFO("isl1208", 0x6f),
- },
- /*
- * The I2C signals are also routed to the Expansion Connector (J4)
- */
-};
-
-static void __init edb9307a_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9307a_flash);
-
- ep93xx_register_eth(&edb9307a_eth_data, 1);
-
- ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data));
-}
-
-MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
- /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9307a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
deleted file mode 100644
index d7179f6..0000000
--- a/arch/arm/mach-ep93xx/edb9312.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9312.c
- * Cirrus Logic EDB9312 support.
- *
- * Copyright (C) 2006 Infosys Technologies Limited
- * Toufeeq Hussain <toufeeq_hussain@infosys.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9312_flash_data = {
- .width = 4,
-};
-
-static struct resource edb9312_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9312_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9312_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9312_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9312_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9312_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9312_flash);
-
- ep93xx_register_eth(&edb9312_eth_data, 1);
-}
-
-MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
- /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9312_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c
deleted file mode 100644
index 025af6e..0000000
--- a/arch/arm/mach-ep93xx/edb9315.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9315.c
- * Cirrus Logic EDB9315 support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9315_flash_data = {
- .width = 4,
-};
-
-static struct resource edb9315_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9315_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9315_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9315_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9315_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9315_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9315_flash);
-
- ep93xx_register_eth(&edb9315_eth_data, 1);
-}
-
-MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9315_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
deleted file mode 100644
index 4c9cc8a..0000000
--- a/arch/arm/mach-ep93xx/edb9315a.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb9315a.c
- * Cirrus Logic EDB9315A support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9315a_flash_data = {
- .width = 2,
-};
-
-static struct resource edb9315a_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9315a_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9315a_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9315a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9315a_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9315a_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9315a_flash);
-
- ep93xx_register_eth(&edb9315a_eth_data, 1);
-}
-
-MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9315a_init_machine,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
new file mode 100644
index 0000000..e9e45b9
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -0,0 +1,217 @@
+/*
+ * arch/arm/mach-ep93xx/edb93xx.c
+ * Cirrus Logic EDB93xx Development Board support.
+ *
+ * EDB93XX, EDB9301, EDB9307A
+ * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * EDB9302
+ * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
+ *
+ * EDB9302A, EDB9315, EDB9315A
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * EDB9307
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * EDB9312
+ * Copyright (C) 2006 Infosys Technologies Limited
+ * Toufeeq Hussain <toufeeq_hussain@infosys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb93xx_flash_data;
+
+static struct resource edb93xx_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device edb93xx_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &edb93xx_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &edb93xx_flash_resource,
+};
+
+static void __init __edb93xx_register_flash(unsigned int width,
+ resource_size_t start, resource_size_t size)
+{
+ edb93xx_flash_data.width = width;
+ edb93xx_flash_resource.start = start;
+ edb93xx_flash_resource.end = start + size - 1;
+
+ platform_device_register(&edb93xx_flash);
+}
+
+static void __init edb93xx_register_flash(void)
+{
+ if (machine_is_edb9307() || machine_is_edb9312() ||
+ machine_is_edb9315()) {
+ __edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
+ } else {
+ __edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
+ }
+}
+
+static struct ep93xx_eth_data edb93xx_eth_data = {
+ .phy_id = 1,
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+ {
+ I2C_BOARD_INFO("isl1208", 0x6f),
+ },
+};
+
+static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68),
+ },
+};
+
+static void __init edb93xx_register_i2c(void)
+{
+ if (machine_is_edb9302a() || machine_is_edb9307a() ||
+ machine_is_edb9315a()) {
+ ep93xx_register_i2c(edb93xxa_i2c_data,
+ ARRAY_SIZE(edb93xxa_i2c_data));
+ } else if (machine_is_edb9307() || machine_is_edb9312() ||
+ machine_is_edb9315()) {
+ ep93xx_register_i2c(edb93xx_i2c_data,
+ ARRAY_SIZE(edb93xx_i2c_data));
+ }
+}
+
+static void __init edb93xx_init_machine(void)
+{
+ ep93xx_init_devices();
+ edb93xx_register_flash();
+ ep93xx_register_eth(&edb93xx_eth_data, 1);
+ edb93xx_register_i2c();
+}
+
+
+#ifdef CONFIG_MACH_EDB9301
+MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
+ /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302
+MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
+ /* Maintainer: George Kashperko <george@chas.com.ua> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302A
+MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307
+MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
+ /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307A
+MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
+ /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9312
+MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
+ /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315
+MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315A
+MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 1732de7..967c079 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -147,13 +147,27 @@
#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000)
#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000)
#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000)
#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
-#define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04)
-#define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000
-#define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000
+#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04)
+#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31)
+#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29)
+#define EP93XX_SYSCON_PWRCNT_USH_EN (1<<28)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 (1<<27)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 (1<<26)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 (1<<25)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 (1<<24)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 (1<<23)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 (1<<22)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 (1<<21)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 (1<<20)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 (1<<19)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 (1<<18)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 (1<<17)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16)
#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
index 5c80c3c..925b12e 100644
--- a/arch/arm/mach-ep93xx/include/mach/memory.h
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -5,6 +5,12 @@
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
+#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)
#define PHYS_OFFSET UL(0x00000000)
+#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
+#define PHYS_OFFSET UL(0xc0000000)
+#else
+#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
+#endif
#endif
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
deleted file mode 100644
index cddd194..0000000
--- a/arch/arm/mach-imx/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-menu "IMX Implementations"
- depends on ARCH_IMX
-
-config ARCH_MX1ADS
- bool "mx1ads"
- depends on ARCH_IMX
- select ISA
- help
- Say Y here if you are using the Motorola MX1ADS board
-
-endmenu
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
deleted file mode 100644
index b047c7e..0000000
--- a/arch/arm/mach-imx/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y += irq.o time.o dma.o generic.o clock.o
-
-obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
-
-# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-
-# Support for blinky lights
-led-y := leds.o
-
-obj-$(CONFIG_LEDS) += $(led-y)
-led-$(CONFIG_ARCH_MX1ADS) += leds-mx1ads.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
deleted file mode 100644
index fd72ce5..0000000
--- a/arch/arm/mach-imx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
- zreladdr-$(CONFIG_ARCH_MX1ADS) := 0x08008000
-
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
deleted file mode 100644
index cf332ae..0000000
--- a/arch/arm/mach-imx/clock.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/math64.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-/*
- * Very simple approach: We can't disable clocks, so we do
- * not need refcounting
- */
-
-struct clk {
- struct list_head node;
- const char *name;
- unsigned long (*get_rate)(void);
-};
-
-/*
- * get the system pll clock in Hz
- *
- * mfi + mfn / (mfd +1)
- * f = 2 * f_ref * --------------------
- * pd + 1
- */
-static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref)
-{
- unsigned long long ll;
- unsigned long quot;
-
- u32 mfi = (pll >> 10) & 0xf;
- u32 mfn = pll & 0x3ff;
- u32 mfd = (pll >> 16) & 0x3ff;
- u32 pd = (pll >> 26) & 0xf;
-
- mfi = mfi <= 5 ? 5 : mfi;
-
- ll = 2 * (unsigned long long)f_ref *
- ((mfi << 16) + (mfn << 16) / (mfd + 1));
- quot = (pd + 1) * (1 << 16);
- ll += quot / 2;
- do_div(ll, quot);
- return (unsigned long)ll;
-}
-
-static unsigned long imx_get_system_clk(void)
-{
- u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
-
- return imx_decode_pll(SPCTL0, f_ref);
-}
-
-static unsigned long imx_get_mcu_clk(void)
-{
- return imx_decode_pll(MPCTL0, CLK32 * 512);
-}
-
-/*
- * get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-static unsigned long imx_get_perclk1(void)
-{
- return imx_get_system_clk() / (((PCDR) & 0xf)+1);
-}
-
-/*
- * get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-static unsigned long imx_get_perclk2(void)
-{
- return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
-}
-
-/*
- * get peripheral clock 3 ( SSI )
- */
-static unsigned long imx_get_perclk3(void)
-{
- return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
-}
-
-/*
- * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-static unsigned long imx_get_hclk(void)
-{
- return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
-}
-
-static struct clk clk_system_clk = {
- .name = "system_clk",
- .get_rate = imx_get_system_clk,
-};
-
-static struct clk clk_hclk = {
- .name = "hclk",
- .get_rate = imx_get_hclk,
-};
-
-static struct clk clk_mcu_clk = {
- .name = "mcu_clk",
- .get_rate = imx_get_mcu_clk,
-};
-
-static struct clk clk_perclk1 = {
- .name = "perclk1",
- .get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_uart_clk = {
- .name = "uart_clk",
- .get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_perclk2 = {
- .name = "perclk2",
- .get_rate = imx_get_perclk2,
-};
-
-static struct clk clk_perclk3 = {
- .name = "perclk3",
- .get_rate = imx_get_perclk3,
-};
-
-static struct clk *clks[] = {
- &clk_perclk1,
- &clk_perclk2,
- &clk_perclk3,
- &clk_system_clk,
- &clk_hclk,
- &clk_mcu_clk,
- &clk_uart_clk,
-};
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *p, *clk = ERR_PTR(-ENOENT);
-
- mutex_lock(&clocks_mutex);
- list_for_each_entry(p, &clocks, node) {
- if (!strcmp(p->name, id)) {
- clk = p;
- goto found;
- }
- }
-
-found:
- mutex_unlock(&clocks_mutex);
-
- return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->get_rate();
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int imx_clocks_init(void)
-{
- int i;
-
- mutex_lock(&clocks_mutex);
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- list_add(&clks[i]->node, &clocks);
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
deleted file mode 100644
index 434b4ca..0000000
--- a/arch/arm/mach-imx/cpufreq.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * cpu.c: clock scaling for the iMX
- *
- * Copyright (C) 2000 2001, The Delft University of Technology
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- * Copyright (C) 2006 Inky Lung <ilung@cwlinux.com>
- * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
- *
- * Based on SA1100 version written by:
- * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
- * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-/*#define DEBUG*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/system.h>
-
-#include <mach/hardware.h>
-
-#include "generic.h"
-
-#ifndef __val2mfld
-#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask))
-#endif
-#ifndef __mfld2val
-#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1)))
-#endif
-
-#define CR_920T_CLOCK_MODE 0xC0000000
-#define CR_920T_FASTBUS_MODE 0x00000000
-#define CR_920T_ASYNC_MODE 0xC0000000
-
-static u32 mpctl0_at_boot;
-static u32 bclk_div_at_boot;
-
-static struct clk *system_clk, *mcu_clk;
-
-static void imx_set_async_mode(void)
-{
- adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE);
-}
-
-static void imx_set_fastbus_mode(void)
-{
- adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE);
-}
-
-static void imx_set_mpctl0(u32 mpctl0)
-{
- unsigned long flags;
-
- if (mpctl0 == 0) {
- local_irq_save(flags);
- CSCR &= ~CSCR_MPEN;
- local_irq_restore(flags);
- return;
- }
-
- local_irq_save(flags);
- MPCTL0 = mpctl0;
- CSCR |= CSCR_MPEN;
- local_irq_restore(flags);
-}
-
-/**
- * imx_compute_mpctl - compute new PLL parameters
- * @new_mpctl: pointer to location assigned by new PLL control register value
- * @cur_mpctl: current PLL control register parameters
- * @f_ref: reference source frequency Hz
- * @freq: required frequency in Hz
- * @relation: is one of %CPUFREQ_RELATION_L (supremum)
- * and %CPUFREQ_RELATION_H (infimum)
- */
-long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, u32 f_ref, unsigned long freq, int relation)
-{
- u32 mfi;
- u32 mfn;
- u32 mfd;
- u32 pd;
- unsigned long long ll;
- long l;
- long quot;
-
- /* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */
- /* PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */
-
- if (cur_mpctl) {
- mfd = ((cur_mpctl >> 16) & 0x3ff) + 1;
- pd = ((cur_mpctl >> 26) & 0xf) + 1;
- } else {
- pd=2; mfd=313;
- }
-
- /* pd=2; mfd=313; mfi=8; mfn=183; */
- /* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */
-
- quot = (f_ref + (1 << 9)) >> 10;
- l = (freq * pd + quot) / (2 * quot);
- mfi = l >> 10;
- mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10;
-
- mfd -= 1;
- pd -= 1;
-
- *new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16)
- | ((pd & 0xf) << 26);
-
- ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) );
- quot = (pd+1) * (1<<16);
- ll += quot / 2;
- do_div(ll, quot);
- freq = ll;
-
- pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n",
- pd, mfd, mfi, mfn, freq);
-
- return freq;
-}
-
-
-static int imx_verify_speed(struct cpufreq_policy *policy)
-{
- if (policy->cpu != 0)
- return -EINVAL;
-
- cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
- return 0;
-}
-
-static unsigned int imx_get_speed(unsigned int cpu)
-{
- unsigned int freq;
- unsigned int cr;
- unsigned int cscr;
- unsigned int bclk_div;
-
- if (cpu)
- return 0;
-
- cscr = CSCR;
- bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1;
- cr = get_cr();
-
- if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) {
- freq = clk_get_rate(system_clk);
- freq = (freq + bclk_div/2) / bclk_div;
- } else {
- freq = clk_get_rate(mcu_clk);
- if (cscr & CSCR_MPU_PRESC)
- freq /= 2;
- }
-
- freq = (freq + 500) / 1000;
-
- return freq;
-}
-
-static int imx_set_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- struct cpufreq_freqs freqs;
- u32 mpctl0 = 0;
- u32 cscr;
- unsigned long flags;
- long freq;
- long sysclk;
- unsigned int bclk_div = bclk_div_at_boot;
-
- /*
- * Some governors do not respects CPU and policy lower limits
- * which leads to bad things (division by zero etc), ensure
- * that such things do not happen.
- */
- if(target_freq < policy->cpuinfo.min_freq)
- target_freq = policy->cpuinfo.min_freq;
-
- if(target_freq < policy->min)
- target_freq = policy->min;
-
- freq = target_freq * 1000;
-
- pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
- freq, mpctl0_at_boot);
-
- sysclk = clk_get_rate(system_clk);
-
- if (freq > sysclk / bclk_div_at_boot + 1000000) {
- freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation);
- if (freq < 0) {
- printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq);
- return -EINVAL;
- }
- } else {
- if(freq + 1000 < sysclk) {
- if (relation == CPUFREQ_RELATION_L)
- bclk_div = (sysclk - 1000) / freq;
- else
- bclk_div = (sysclk + freq + 1000) / freq;
-
- if(bclk_div > 16)
- bclk_div = 16;
- if(bclk_div < bclk_div_at_boot)
- bclk_div = bclk_div_at_boot;
- }
- freq = (sysclk + bclk_div / 2) / bclk_div;
- }
-
- freqs.old = imx_get_speed(0);
- freqs.new = (freq + 500) / 1000;
- freqs.cpu = 0;
- freqs.flags = 0;
-
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
- local_irq_save(flags);
-
- imx_set_fastbus_mode();
-
- imx_set_mpctl0(mpctl0);
-
- cscr = CSCR;
- cscr &= ~CSCR_BCLK_DIV;
- cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1);
- CSCR = cscr;
-
- if(mpctl0) {
- CSCR |= CSCR_MPLL_RESTART;
-
- /* Wait until MPLL is stabilized */
- while( CSCR & CSCR_MPLL_RESTART );
-
- imx_set_async_mode();
- }
-
- local_irq_restore(flags);
-
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
- pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n",
- freq, mpctl0? "MPLL": "SPLL");
-
- return 0;
-}
-
-static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy)
-{
- printk(KERN_INFO "i.MX cpu freq change driver v1.0\n");
-
- if (policy->cpu != 0)
- return -EINVAL;
-
- policy->cur = policy->min = policy->max = imx_get_speed(0);
- policy->cpuinfo.min_freq = 8000;
- policy->cpuinfo.max_freq = 200000;
- /* Manual states, that PLL stabilizes in two CLK32 periods */
- policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32;
- return 0;
-}
-
-static struct cpufreq_driver imx_driver = {
- .flags = CPUFREQ_STICKY,
- .verify = imx_verify_speed,
- .target = imx_set_target,
- .get = imx_get_speed,
- .init = imx_cpufreq_driver_init,
- .name = "imx",
-};
-
-static int __init imx_cpufreq_init(void)
-{
- bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1;
- mpctl0_at_boot = 0;
-
- system_clk = clk_get(NULL, "system_clk");
- if (IS_ERR(system_clk))
- return PTR_ERR(system_clk);
-
- mcu_clk = clk_get(NULL, "mcu_clk");
- if (IS_ERR(mcu_clk)) {
- clk_put(system_clk);
- return PTR_ERR(mcu_clk);
- }
-
- if((CSCR & CSCR_MPEN) &&
- ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE))
- mpctl0_at_boot = MPCTL0;
-
- return cpufreq_register_driver(&imx_driver);
-}
-
-arch_initcall(imx_cpufreq_init);
-
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
deleted file mode 100644
index 1536583..0000000
--- a/arch/arm/mach-imx/dma.c
+++ /dev/null
@@ -1,597 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/dma.c
- *
- * imx DMA registration and IRQ dispatching
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * 2004-03-03 Sascha Hauer <sascha@saschahauer.de>
- * initial version heavily inspired by
- * linux/arch/arm/mach-pxa/dma.c
- *
- * 2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- * Changed to support scatter gather DMA
- * by taking Russell's code from RiscPC
- *
- * 2006-05-31 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- * Corrected error handling code.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-
-#include <asm/scatterlist.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/imx-dma.h>
-
-struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-/*
- * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @lastcount: number of bytes transferred during last transfer
- *
- * Functions prepares DMA controller for next sg data chunk transfer.
- * The @lastcount argument informs function about number of bytes transferred
- * during last block. Zero value can be used for @lastcount to setup DMA
- * for the first chunk.
- */
-static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
- unsigned int nextcount;
- unsigned int nextaddr;
-
- if (!imxdma->name) {
- printk(KERN_CRIT "%s: called for not allocated channel %d\n",
- __func__, dma_ch);
- return 0;
- }
-
- imxdma->resbytes -= lastcount;
-
- if (!imxdma->sg) {
- pr_debug("imxdma%d: no sg data\n", dma_ch);
- return 0;
- }
-
- imxdma->sgbc += lastcount;
- if ((imxdma->sgbc >= imxdma->sg->length) || !imxdma->resbytes) {
- if ((imxdma->sgcount <= 1) || !imxdma->resbytes) {
- pr_debug("imxdma%d: sg transfer limit reached\n",
- dma_ch);
- imxdma->sgcount=0;
- imxdma->sg = NULL;
- return 0;
- } else {
- imxdma->sgcount--;
- imxdma->sg++;
- imxdma->sgbc = 0;
- }
- }
- nextcount = imxdma->sg->length - imxdma->sgbc;
- nextaddr = imxdma->sg->dma_address + imxdma->sgbc;
-
- if(imxdma->resbytes < nextcount)
- nextcount = imxdma->resbytes;
-
- if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
- DAR(dma_ch) = nextaddr;
- else
- SAR(dma_ch) = nextaddr;
-
- CNTR(dma_ch) = nextcount;
- pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, size 0x%08x\n",
- dma_ch, DAR(dma_ch), SAR(dma_ch), CNTR(dma_ch));
-
- return nextcount;
-}
-
-/*
- * imx_dma_setup_sg_base - scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- *
- * Functions sets up i.MX DMA state for emulated scatter-gather transfer
- * and sets up channel registers to be ready for the first chunk
- */
-static int
-imx_dma_setup_sg_base(imx_dmach_t dma_ch,
- struct scatterlist *sg, unsigned int sgcount)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
- imxdma->sg = sg;
- imxdma->sgcount = sgcount;
- imxdma->sgbc = 0;
- return imx_dma_sg_next(dma_ch, 0);
-}
-
-/**
- * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @dma_address: the DMA/physical memory address of the linear data block
- * to transfer
- * @dma_length: length of the data block in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- * or %DMA_MODE_WRITE from memory to the device
- *
- * The function setups DMA channel source and destination addresses for transfer
- * specified by provided parameters. The scatter-gather emulation is disabled,
- * because linear data block
- * form the physical address range is transferred.
- * Return value: if incorrect parameters are provided -%EINVAL.
- * Zero indicates success.
- */
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
- unsigned int dma_length, unsigned int dev_addr,
- unsigned int dmamode)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
- imxdma->sg = NULL;
- imxdma->sgcount = 0;
- imxdma->dma_mode = dmamode;
- imxdma->resbytes = dma_length;
-
- if (!dma_address) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
- dma_ch);
- return -EINVAL;
- }
-
- if (!dma_length) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
- dma_ch);
- return -EINVAL;
- }
-
- if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
- pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for read\n",
- dma_ch, (unsigned int)dma_address, dma_length,
- dev_addr);
- SAR(dma_ch) = dev_addr;
- DAR(dma_ch) = (unsigned int)dma_address;
- } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
- pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for write\n",
- dma_ch, (unsigned int)dma_address, dma_length,
- dev_addr);
- SAR(dma_ch) = (unsigned int)dma_address;
- DAR(dma_ch) = dev_addr;
- } else {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
- dma_ch);
- return -EINVAL;
- }
-
- CNTR(dma_ch) = dma_length;
-
- return 0;
-}
-
-/**
- * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- * @dma_length: total length of the transfer request in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- * or %DMA_MODE_WRITE from memory to the device
- *
- * The function sets up DMA channel state and registers to be ready for transfer
- * specified by provided parameters. The scatter-gather emulation is set up
- * according to the parameters.
- *
- * The full preparation of the transfer requires setup of more register
- * by the caller before imx_dma_enable() can be called.
- *
- * %BLR(dma_ch) holds transfer burst length in bytes, 0 means 64 bytes
- *
- * %RSSR(dma_ch) has to be set to the DMA request line source %DMA_REQ_xxx
- *
- * %CCR(dma_ch) has to specify transfer parameters, the next settings is typical
- * for linear or simple scatter-gather transfers if %DMA_MODE_READ is specified
- *
- * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
- *
- * The typical setup for %DMA_MODE_WRITE is specified by next options combination
- *
- * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
- *
- * Be careful here and do not mistakenly mix source and target device
- * port sizes constants, they are really different:
- * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
- * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
- *
- * Return value: if incorrect parameters are provided -%EINVAL.
- * Zero indicates success.
- */
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
- struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
- unsigned int dev_addr, unsigned int dmamode)
-{
- int res;
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
- imxdma->sg = NULL;
- imxdma->sgcount = 0;
- imxdma->dma_mode = dmamode;
- imxdma->resbytes = dma_length;
-
- if (!sg || !sgcount) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
- dma_ch);
- return -EINVAL;
- }
-
- if (!sg->length) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
- dma_ch);
- return -EINVAL;
- }
-
- if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
- pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for read\n",
- dma_ch, sg, sgcount, dma_length, dev_addr);
- SAR(dma_ch) = dev_addr;
- } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
- pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for write\n",
- dma_ch, sg, sgcount, dma_length, dev_addr);
- DAR(dma_ch) = dev_addr;
- } else {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
- dma_ch);
- return -EINVAL;
- }
-
- res = imx_dma_setup_sg_base(dma_ch, sg, sgcount);
- if (res <= 0) {
- printk(KERN_ERR "imxdma%d: no sg chunk ready\n", dma_ch);
- return -EINVAL;
- }
-
- return 0;
-}
-
-/**
- * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification handlers
- * @dma_ch: i.MX DMA channel number
- * @irq_handler: the pointer to the function called if the transfer
- * ends successfully
- * @err_handler: the pointer to the function called if the premature
- * end caused by error occurs
- * @data: user specified value to be passed to the handlers
- */
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
- void (*irq_handler) (int, void *),
- void (*err_handler) (int, void *, int),
- void *data)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
- unsigned long flags;
-
- if (!imxdma->name) {
- printk(KERN_CRIT "%s: called for not allocated channel %d\n",
- __func__, dma_ch);
- return -ENODEV;
- }
-
- local_irq_save(flags);
- DISR = (1 << dma_ch);
- imxdma->irq_handler = irq_handler;
- imxdma->err_handler = err_handler;
- imxdma->data = data;
- local_irq_restore(flags);
- return 0;
-}
-
-/**
- * imx_dma_enable - function to start i.MX DMA channel operation
- * @dma_ch: i.MX DMA channel number
- *
- * The channel has to be allocated by driver through imx_dma_request()
- * or imx_dma_request_by_prio() function.
- * The transfer parameters has to be set to the channel registers through
- * call of the imx_dma_setup_single() or imx_dma_setup_sg() function
- * and registers %BLR(dma_ch), %RSSR(dma_ch) and %CCR(dma_ch) has to
- * be set prior this function call by the channel user.
- */
-void imx_dma_enable(imx_dmach_t dma_ch)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
- unsigned long flags;
-
- pr_debug("imxdma%d: imx_dma_enable\n", dma_ch);
-
- if (!imxdma->name) {
- printk(KERN_CRIT "%s: called for not allocated channel %d\n",
- __func__, dma_ch);
- return;
- }
-
- local_irq_save(flags);
- DISR = (1 << dma_ch);
- DIMR &= ~(1 << dma_ch);
- CCR(dma_ch) |= CCR_CEN;
- local_irq_restore(flags);
-}
-
-/**
- * imx_dma_disable - stop, finish i.MX DMA channel operatin
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_disable(imx_dmach_t dma_ch)
-{
- unsigned long flags;
-
- pr_debug("imxdma%d: imx_dma_disable\n", dma_ch);
-
- local_irq_save(flags);
- DIMR |= (1 << dma_ch);
- CCR(dma_ch) &= ~CCR_CEN;
- DISR = (1 << dma_ch);
- local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request - request/allocate specified channel number
- * @dma_ch: i.MX DMA channel number
- * @name: the driver/caller own non-%NULL identification
- */
-int imx_dma_request(imx_dmach_t dma_ch, const char *name)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
- unsigned long flags;
-
- /* basic sanity checks */
- if (!name)
- return -EINVAL;
-
- if (dma_ch >= IMX_DMA_CHANNELS) {
- printk(KERN_CRIT "%s: called for non-existed channel %d\n",
- __func__, dma_ch);
- return -EINVAL;
- }
-
- local_irq_save(flags);
- if (imxdma->name) {
- local_irq_restore(flags);
- return -ENODEV;
- }
-
- imxdma->name = name;
- imxdma->irq_handler = NULL;
- imxdma->err_handler = NULL;
- imxdma->data = NULL;
- imxdma->sg = NULL;
- local_irq_restore(flags);
- return 0;
-}
-
-/**
- * imx_dma_free - release previously acquired channel
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_free(imx_dmach_t dma_ch)
-{
- unsigned long flags;
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
- if (!imxdma->name) {
- printk(KERN_CRIT
- "%s: trying to free channel %d which is already freed\n",
- __func__, dma_ch);
- return;
- }
-
- local_irq_save(flags);
- /* Disable interrupts */
- DIMR |= (1 << dma_ch);
- CCR(dma_ch) &= ~CCR_CEN;
- imxdma->name = NULL;
- local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority
- * @name: the driver/caller own non-%NULL identification
- * @prio: one of the hardware distinguished priority level:
- * %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW
- *
- * This function tries to find free channel in the specified priority group
- * if the priority cannot be achieved it tries to look for free channel
- * in the higher and then even lower priority groups.
- *
- * Return value: If there is no free channel to allocate, -%ENODEV is returned.
- * On successful allocation channel is returned.
- */
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio)
-{
- int i;
- int best;
-
- switch (prio) {
- case (DMA_PRIO_HIGH):
- best = 8;
- break;
- case (DMA_PRIO_MEDIUM):
- best = 4;
- break;
- case (DMA_PRIO_LOW):
- default:
- best = 0;
- break;
- }
-
- for (i = best; i < IMX_DMA_CHANNELS; i++) {
- if (!imx_dma_request(i, name)) {
- return i;
- }
- }
-
- for (i = best - 1; i >= 0; i--) {
- if (!imx_dma_request(i, name)) {
- return i;
- }
- }
-
- printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
-
- return -ENODEV;
-}
-
-static irqreturn_t dma_err_handler(int irq, void *dev_id)
-{
- int i, disr = DISR;
- struct imx_dma_channel *channel;
- unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR;
- int errcode;
-
- DISR = disr & err_mask;
- for (i = 0; i < IMX_DMA_CHANNELS; i++) {
- if(!(err_mask & (1 << i)))
- continue;
- channel = &imx_dma_channels[i];
- errcode = 0;
-
- if (DBTOSR & (1 << i)) {
- DBTOSR = (1 << i);
- errcode |= IMX_DMA_ERR_BURST;
- }
- if (DRTOSR & (1 << i)) {
- DRTOSR = (1 << i);
- errcode |= IMX_DMA_ERR_REQUEST;
- }
- if (DSESR & (1 << i)) {
- DSESR = (1 << i);
- errcode |= IMX_DMA_ERR_TRANSFER;
- }
- if (DBOSR & (1 << i)) {
- DBOSR = (1 << i);
- errcode |= IMX_DMA_ERR_BUFFER;
- }
-
- /*
- * The cleaning of @sg field would be questionable
- * there, because its value can help to compute
- * remaining/transferred bytes count in the handler
- */
- /*imx_dma_channels[i].sg = NULL;*/
-
- if (channel->name && channel->err_handler) {
- channel->err_handler(i, channel->data, errcode);
- continue;
- }
-
- imx_dma_channels[i].sg = NULL;
-
- printk(KERN_WARNING
- "DMA timeout on channel %d (%s) -%s%s%s%s\n",
- i, channel->name,
- errcode&IMX_DMA_ERR_BURST? " burst":"",
- errcode&IMX_DMA_ERR_REQUEST? " request":"",
- errcode&IMX_DMA_ERR_TRANSFER? " transfer":"",
- errcode&IMX_DMA_ERR_BUFFER? " buffer":"");
- }
- return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
- int i, disr = DISR;
-
- pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
- disr);
-
- DISR = disr;
- for (i = 0; i < IMX_DMA_CHANNELS; i++) {
- if (disr & (1 << i)) {
- struct imx_dma_channel *channel = &imx_dma_channels[i];
- if (channel->name) {
- if (imx_dma_sg_next(i, CNTR(i))) {
- CCR(i) &= ~CCR_CEN;
- mb();
- CCR(i) |= CCR_CEN;
- } else {
- if (channel->irq_handler)
- channel->irq_handler(i,
- channel->data);
- }
- } else {
- /*
- * IRQ for an unregistered DMA channel:
- * let's clear the interrupts and disable it.
- */
- printk(KERN_WARNING
- "spurious IRQ for DMA channel %d\n", i);
- }
- }
- }
- return IRQ_HANDLED;
-}
-
-static int __init imx_dma_init(void)
-{
- int ret;
- int i;
-
- /* reset DMA module */
- DCR = DCR_DRST;
-
- ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
- if (ret) {
- printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n");
- return ret;
- }
-
- ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
- if (ret) {
- printk(KERN_CRIT "Wow! Can't register ERRIRQ for DMA\n");
- free_irq(DMA_INT, NULL);
- }
-
- /* enable DMA module */
- DCR = DCR_DEN;
-
- /* clear all interrupts */
- DISR = (1 << IMX_DMA_CHANNELS) - 1;
-
- /* enable interrupts */
- DIMR = (1 << IMX_DMA_CHANNELS) - 1;
-
- for (i = 0; i < IMX_DMA_CHANNELS; i++) {
- imx_dma_channels[i].sg = NULL;
- imx_dma_channels[i].dma_num = i;
- }
-
- return ret;
-}
-
-arch_initcall(imx_dma_init);
-
-EXPORT_SYMBOL(imx_dma_setup_single);
-EXPORT_SYMBOL(imx_dma_setup_sg);
-EXPORT_SYMBOL(imx_dma_setup_handlers);
-EXPORT_SYMBOL(imx_dma_enable);
-EXPORT_SYMBOL(imx_dma_disable);
-EXPORT_SYMBOL(imx_dma_request);
-EXPORT_SYMBOL(imx_dma_free);
-EXPORT_SYMBOL(imx_dma_request_by_prio);
-EXPORT_SYMBOL(imx_dma_channels);
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
deleted file mode 100644
index 05f1739..0000000
--- a/arch/arm/mach-imx/generic.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * arch/arm/mach-imx/generic.c
- *
- * author: Sascha Hauer
- * Created: april 20th, 2004
- * Copyright: Synertronixx GmbH
- *
- * Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <asm/errno.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#include <asm/mach/map.h>
-#include <mach/mmc.h>
-#include <mach/gpio.h>
-
-unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
-
-void imx_gpio_mode(int gpio_mode)
-{
- unsigned int pin = gpio_mode & GPIO_PIN_MASK;
- unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
- unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
- unsigned int tmp;
-
- /* Pullup enable */
- if(gpio_mode & GPIO_PUEN)
- PUEN(port) |= (1<<pin);
- else
- PUEN(port) &= ~(1<<pin);
-
- /* Data direction */
- if(gpio_mode & GPIO_OUT)
- DDIR(port) |= 1<<pin;
- else
- DDIR(port) &= ~(1<<pin);
-
- /* Primary / alternate function */
- if(gpio_mode & GPIO_AF)
- GPR(port) |= (1<<pin);
- else
- GPR(port) &= ~(1<<pin);
-
- /* use as gpio? */
- if(gpio_mode & GPIO_GIUS)
- GIUS(port) |= (1<<pin);
- else
- GIUS(port) &= ~(1<<pin);
-
- /* Output / input configuration */
- /* FIXME: I'm not very sure about OCR and ICONF, someone
- * should have a look over it
- */
- if(pin<16) {
- tmp = OCR1(port);
- tmp &= ~( 3<<(pin*2));
- tmp |= (ocr << (pin*2));
- OCR1(port) = tmp;
-
- ICONFA1(port) &= ~( 3<<(pin*2));
- ICONFA1(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
- ICONFB1(port) &= ~( 3<<(pin*2));
- ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
- } else {
- tmp = OCR2(port);
- tmp &= ~( 3<<((pin-16)*2));
- tmp |= (ocr << ((pin-16)*2));
- OCR2(port) = tmp;
-
- ICONFA2(port) &= ~( 3<<((pin-16)*2));
- ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2);
- ICONFB2(port) &= ~( 3<<((pin-16)*2));
- ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2);
- }
-}
-
-EXPORT_SYMBOL(imx_gpio_mode);
-
-int imx_gpio_request(unsigned gpio, const char *label)
-{
- if(gpio >= (GPIO_PORT_MAX + 1) * 32) {
- printk(KERN_ERR "imx_gpio: Attempt to request nonexistent GPIO %d for \"%s\"\n",
- gpio, label ? label : "?");
- return -EINVAL;
- }
-
- if(test_and_set_bit(gpio, imx_gpio_alloc_map)) {
- printk(KERN_ERR "imx_gpio: GPIO %d already used. Allocation for \"%s\" failed\n",
- gpio, label ? label : "?");
- return -EBUSY;
- }
-
- return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_request);
-
-void imx_gpio_free(unsigned gpio)
-{
- if(gpio >= (GPIO_PORT_MAX + 1) * 32)
- return;
-
- clear_bit(gpio, imx_gpio_alloc_map);
-}
-
-EXPORT_SYMBOL(imx_gpio_free);
-
-int imx_gpio_direction_input(unsigned gpio)
-{
- imx_gpio_mode(gpio | GPIO_IN | GPIO_GIUS | GPIO_DR);
- return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_input);
-
-int imx_gpio_direction_output(unsigned gpio, int value)
-{
- imx_gpio_set_value(gpio, value);
- imx_gpio_mode(gpio | GPIO_OUT | GPIO_GIUS | GPIO_DR);
- return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_output);
-
-int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- int alloc_mode, const char *label)
-{
- const int *p = pin_list;
- int i;
- unsigned gpio;
- unsigned mode;
-
- for (i = 0; i < count; i++) {
- gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
- mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
-
- if (gpio >= (GPIO_PORT_MAX + 1) * 32)
- goto setup_error;
-
- if (alloc_mode & IMX_GPIO_ALLOC_MODE_RELEASE)
- imx_gpio_free(gpio);
- else if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_NO_ALLOC))
- if (imx_gpio_request(gpio, label))
- if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
- goto setup_error;
-
- if (!(alloc_mode & (IMX_GPIO_ALLOC_MODE_ALLOC_ONLY |
- IMX_GPIO_ALLOC_MODE_RELEASE)))
- imx_gpio_mode(gpio | mode);
-
- p++;
- }
- return 0;
-
-setup_error:
- if(alloc_mode & (IMX_GPIO_ALLOC_MODE_NO_ALLOC |
- IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
- return -EINVAL;
-
- while (p != pin_list) {
- p--;
- gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
- imx_gpio_free(gpio);
- }
-
- return -EINVAL;
-}
-
-EXPORT_SYMBOL(imx_gpio_setup_multiple_pins);
-
-void __imx_gpio_set_value(unsigned gpio, int value)
-{
- imx_gpio_set_value_inline(gpio, value);
-}
-
-EXPORT_SYMBOL(__imx_gpio_set_value);
-
-int imx_gpio_to_irq(unsigned gpio)
-{
- return IRQ_GPIOA(0) + gpio;
-}
-
-EXPORT_SYMBOL(imx_gpio_to_irq);
-
-int imx_irq_to_gpio(unsigned irq)
-{
- if (irq < IRQ_GPIOA(0))
- return -EINVAL;
- return irq - IRQ_GPIOA(0);
-}
-
-EXPORT_SYMBOL(imx_irq_to_gpio);
-
-static struct resource imx_mmc_resources[] = {
- [0] = {
- .start = 0x00214000,
- .end = 0x002140FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (SDHC_INT),
- .end = (SDHC_INT),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 imxmmmc_dmamask = 0xffffffffUL;
-
-static struct platform_device imx_mmc_device = {
- .name = "imx-mmc",
- .id = 0,
- .dev = {
- .dma_mask = &imxmmmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(imx_mmc_resources),
- .resource = imx_mmc_resources,
-};
-
-void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
-{
- imx_mmc_device.dev.platform_data = info;
-}
-
-static struct platform_device *devices[] __initdata = {
- &imx_mmc_device,
-};
-
-static struct map_desc imx_io_desc[] __initdata = {
- {
- .virtual = IMX_IO_BASE,
- .pfn = __phys_to_pfn(IMX_IO_PHYS),
- .length = IMX_IO_SIZE,
- .type = MT_DEVICE
- }
-};
-
-void __init
-imx_map_io(void)
-{
- iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
-}
-
-static int __init imx_init(void)
-{
- return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-subsys_initcall(imx_init);
diff --git a/arch/arm/mach-imx/generic.h b/arch/arm/mach-imx/generic.h
deleted file mode 100644
index e91003e..0000000
--- a/arch/arm/mach-imx/generic.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/generic.h
- *
- * Author: Sascha Hauer <sascha@saschahauer.de>
- * Copyright: Synertronixx GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-extern void __init imx_map_io(void);
-extern void __init imx_init_irq(void);
-
-struct sys_timer;
-extern struct sys_timer imx_timer;
diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S
deleted file mode 100644
index 87802bbf..0000000
--- a/arch/arm/mach-imx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/mach-imx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x00000000 @ physical
- movne \rx, #0xe0000000 @ virtual
- orreq \rx, \rx, #0x00200000 @ physical
- orr \rx, \rx, #0x00006000 @ UART1 offset
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0x40] @ TXDATA
- .endm
-
- .macro waituart,rd,rx
- .endm
-
- .macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #0x98] @ SR2
- tst \rd, #1 << 3 @ TXDC
- beq 1002b @ wait until transmit done
- .endm
diff --git a/arch/arm/mach-imx/include/mach/dma.h b/arch/arm/mach-imx/include/mach/dma.h
deleted file mode 100644
index 621ff2c..0000000
--- a/arch/arm/mach-imx/include/mach/dma.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * linux/include/asm-arm/imxads/dma.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-typedef enum {
- DMA_PRIO_HIGH = 0,
- DMA_PRIO_MEDIUM = 1,
- DMA_PRIO_LOW = 2
-} imx_dma_prio;
-
-#define DMA_REQ_UART3_T 2
-#define DMA_REQ_UART3_R 3
-#define DMA_REQ_SSI2_T 4
-#define DMA_REQ_SSI2_R 5
-#define DMA_REQ_CSI_STAT 6
-#define DMA_REQ_CSI_R 7
-#define DMA_REQ_MSHC 8
-#define DMA_REQ_DSPA_DCT_DOUT 9
-#define DMA_REQ_DSPA_DCT_DIN 10
-#define DMA_REQ_DSPA_MAC 11
-#define DMA_REQ_EXT 12
-#define DMA_REQ_SDHC 13
-#define DMA_REQ_SPI1_R 14
-#define DMA_REQ_SPI1_T 15
-#define DMA_REQ_SSI_T 16
-#define DMA_REQ_SSI_R 17
-#define DMA_REQ_ASP_DAC 18
-#define DMA_REQ_ASP_ADC 19
-#define DMA_REQ_USP_EP(x) (20+(x))
-#define DMA_REQ_SPI2_R 26
-#define DMA_REQ_SPI2_T 27
-#define DMA_REQ_UART2_T 28
-#define DMA_REQ_UART2_R 29
-#define DMA_REQ_UART1_T 30
-#define DMA_REQ_UART1_R 31
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S
deleted file mode 100644
index e4db679..0000000
--- a/arch/arm/mach-imx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for iMX-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
-#define AITC_NIVECSR 0x40
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =IO_ADDRESS(IMX_AITC_BASE)
- @ Load offset & priority of the highest priority
- @ interrupt pending.
- ldr \irqstat, [\base, #AITC_NIVECSR]
- @ Shift off the priority leaving the offset or
- @ "interrupt number", use arithmetic shift to
- @ transform illegal source (0xffff) as -1
- mov \irqnr, \irqstat, asr #16
- adds \tmp, \irqnr, #1
- .endm
diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
deleted file mode 100644
index 6c2942f..0000000
--- a/arch/arm/mach-imx/include/mach/gpio.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#ifndef _IMX_GPIO_H
-
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#define IMX_GPIO_ALLOC_MODE_NORMAL 0
-#define IMX_GPIO_ALLOC_MODE_NO_ALLOC 1
-#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC 2
-#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY 4
-#define IMX_GPIO_ALLOC_MODE_RELEASE 8
-
-extern int imx_gpio_request(unsigned gpio, const char *label);
-
-extern void imx_gpio_free(unsigned gpio);
-
-extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- int alloc_mode, const char *label);
-
-extern int imx_gpio_direction_input(unsigned gpio);
-
-extern int imx_gpio_direction_output(unsigned gpio, int value);
-
-extern void __imx_gpio_set_value(unsigned gpio, int value);
-
-static inline int imx_gpio_get_value(unsigned gpio)
-{
- return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
-}
-
-static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
-{
- unsigned long flags;
-
- raw_local_irq_save(flags);
- if(value)
- DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
- else
- DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
- raw_local_irq_restore(flags);
-}
-
-static inline void imx_gpio_set_value(unsigned gpio, int value)
-{
- if(__builtin_constant_p(gpio))
- imx_gpio_set_value_inline(gpio, value);
- else
- __imx_gpio_set_value(gpio, value);
-}
-
-extern int imx_gpio_to_irq(unsigned gpio);
-
-extern int imx_irq_to_gpio(unsigned irq);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
- * to allow future extension of GPIO logic.
- */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return imx_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- might_sleep();
-
- imx_gpio_free(gpio);
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- return imx_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- return imx_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return imx_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- imx_gpio_set_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return imx_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return imx_irq_to_gpio(irq);
-}
-
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h
deleted file mode 100644
index c73e9e7..0000000
--- a/arch/arm/mach-imx/include/mach/hardware.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/hardware.h
- *
- * Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include "imx-regs.h"
-
-#ifndef __ASSEMBLY__
-# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x)))
-
-# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
-#endif
-
-/*
- * Memory map
- */
-
-#define IMX_IO_PHYS 0x00200000
-#define IMX_IO_SIZE 0x00100000
-#define IMX_IO_BASE 0xe0000000
-
-#define IMX_CS0_PHYS 0x10000000
-#define IMX_CS0_SIZE 0x02000000
-#define IMX_CS0_VIRT 0xe8000000
-
-#define IMX_CS1_PHYS 0x12000000
-#define IMX_CS1_SIZE 0x01000000
-#define IMX_CS1_VIRT 0xea000000
-
-#define IMX_CS2_PHYS 0x13000000
-#define IMX_CS2_SIZE 0x01000000
-#define IMX_CS2_VIRT 0xeb000000
-
-#define IMX_CS3_PHYS 0x14000000
-#define IMX_CS3_SIZE 0x01000000
-#define IMX_CS3_VIRT 0xec000000
-
-#define IMX_CS4_PHYS 0x15000000
-#define IMX_CS4_SIZE 0x01000000
-#define IMX_CS4_VIRT 0xed000000
-
-#define IMX_CS5_PHYS 0x16000000
-#define IMX_CS5_SIZE 0x01000000
-#define IMX_CS5_VIRT 0xee000000
-
-#define IMX_FB_VIRT 0xF1000000
-#define IMX_FB_SIZE (256*1024)
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
-
-#ifndef __ASSEMBLY__
-/*
- * Handy routine to set GPIO functions
- */
-extern void imx_gpio_mode( int gpio_mode );
-
-#endif
-
-#define MAXIRQNUM 62
-#define MAXFIQNUM 62
-#define MAXSWINUM 62
-
-/*
- * Use SDRAM for memory
- */
-#define MEM_SIZE 0x01000000
-
-#ifdef CONFIG_ARCH_MX1ADS
-#include "mx1ads.h"
-#endif
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h
deleted file mode 100644
index bbe54df..0000000
--- a/arch/arm/mach-imx/include/mach/imx-dma.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * linux/include/asm-arm/imxads/dma.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <mach/dma.h>
-
-#ifndef __ASM_ARCH_IMX_DMA_H
-#define __ASM_ARCH_IMX_DMA_H
-
-#define IMX_DMA_CHANNELS 11
-
-/*
- * struct imx_dma_channel - i.MX specific DMA extension
- * @name: name specified by DMA client
- * @irq_handler: client callback for end of transfer
- * @err_handler: client callback for error condition
- * @data: clients context data for callbacks
- * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
- * @sg: pointer to the actual read/written chunk for scatter-gather emulation
- * @sgbc: counter of processed bytes in the actual read/written chunk
- * @resbytes: total residual number of bytes to transfer
- * (it can be lower or same as sum of SG mapped chunk sizes)
- * @sgcount: number of chunks to be read/written
- *
- * Structure is used for IMX DMA processing. It would be probably good
- * @struct dma_struct in the future for external interfacing and use
- * @struct imx_dma_channel only as extension to it.
- */
-
-struct imx_dma_channel {
- const char *name;
- void (*irq_handler) (int, void *);
- void (*err_handler) (int, void *, int errcode);
- void *data;
- unsigned int dma_mode;
- struct scatterlist *sg;
- unsigned int sgbc;
- unsigned int sgcount;
- unsigned int resbytes;
- int dma_num;
-};
-
-extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-#define IMX_DMA_ERR_BURST 1
-#define IMX_DMA_ERR_REQUEST 2
-#define IMX_DMA_ERR_TRANSFER 4
-#define IMX_DMA_ERR_BUFFER 8
-
-/* The type to distinguish channel numbers parameter from ordinal int type */
-typedef int imx_dmach_t;
-
-#define DMA_MODE_READ 0
-#define DMA_MODE_WRITE 1
-#define DMA_MODE_MASK 1
-
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
- unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
- struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
- unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
- void (*irq_handler) (int, void *),
- void (*err_handler) (int, void *, int), void *data);
-
-void imx_dma_enable(imx_dmach_t dma_ch);
-
-void imx_dma_disable(imx_dmach_t dma_ch);
-
-int imx_dma_request(imx_dmach_t dma_ch, const char *name);
-
-void imx_dma_free(imx_dmach_t dma_ch);
-
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio);
-
-
-#endif /* _ASM_ARCH_IMX_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
deleted file mode 100644
index 490297f..0000000
--- a/arch/arm/mach-imx/include/mach/imx-regs.h
+++ /dev/null
@@ -1,376 +0,0 @@
-#ifndef _IMX_REGS_H
-#define _IMX_REGS_H
-/* ------------------------------------------------------------------------
- * Motorola IMX system registers
- * ------------------------------------------------------------------------
- *
- */
-
-/*
- * Register BASEs, based on OFFSETs
- *
- */
-#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE)
-#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE)
-#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE)
-#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE)
-#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE)
-#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE)
-#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE)
-#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE)
-#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE)
-#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE)
-#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE)
-#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE)
-#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE)
-#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE)
-#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE)
-#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE)
-#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE)
-#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE)
-#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE)
-#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE)
-#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE)
-#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE)
-#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE)
-#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE)
-#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE)
-#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE)
-#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE)
-
-/* PLL registers */
-#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */
-#define CSCR_SPLL_RESTART (1<<22)
-#define CSCR_MPLL_RESTART (1<<21)
-#define CSCR_SYSTEM_SEL (1<<16)
-#define CSCR_BCLK_DIV (0xf<<10)
-#define CSCR_MPU_PRESC (1<<15)
-#define CSCR_SPEN (1<<1)
-#define CSCR_MPEN (1<<0)
-
-#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */
-#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */
-#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */
-#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
-#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
-
-/*
- * GPIO Module and I/O Multiplexer
- * x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
-#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
-#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
-#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
-#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
-#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
-#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
-#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
-#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
-#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
-#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
-#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
-#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
-#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
-#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
-#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
-#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
-
-#define GPIO_PORT_MAX 3
-
-#define GPIO_PIN_MASK 0x1f
-#define GPIO_PORT_MASK (0x3 << 5)
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORTA (0<<5)
-#define GPIO_PORTB (1<<5)
-#define GPIO_PORTC (2<<5)
-#define GPIO_PORTD (3<<5)
-
-#define GPIO_OUT (1<<7)
-#define GPIO_IN (0<<7)
-#define GPIO_PUEN (1<<8)
-
-#define GPIO_PF (0<<9)
-#define GPIO_AF (1<<9)
-
-#define GPIO_OCR_SHIFT 10
-#define GPIO_OCR_MASK (3<<10)
-#define GPIO_AIN (0<<10)
-#define GPIO_BIN (1<<10)
-#define GPIO_CIN (2<<10)
-#define GPIO_DR (3<<10)
-
-#define GPIO_AOUT_SHIFT 12
-#define GPIO_AOUT_MASK (3<<12)
-#define GPIO_AOUT (0<<12)
-#define GPIO_AOUT_ISR (1<<12)
-#define GPIO_AOUT_0 (2<<12)
-#define GPIO_AOUT_1 (3<<12)
-
-#define GPIO_BOUT_SHIFT 14
-#define GPIO_BOUT_MASK (3<<14)
-#define GPIO_BOUT (0<<14)
-#define GPIO_BOUT_ISR (1<<14)
-#define GPIO_BOUT_0 (2<<14)
-#define GPIO_BOUT_1 (3<<14)
-
-#define GPIO_GIUS (1<<16)
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#define PA0_AIN_SPI2_CLK ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 )
-#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 )
-#define PA1_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 )
-#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 )
-#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
-#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 )
-#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 )
-#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 )
-#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 )
-#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 )
-#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 )
-#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 )
-#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 )
-#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 )
-#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 )
-#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 )
-#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 )
-#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
-#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
-#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
-#define PA17_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 )
-#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
-#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
-#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
-#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 )
-#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 )
-#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 )
-#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 )
-#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
-#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 )
-#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
-#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 )
-#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
-#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 )
-#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
-#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 )
-#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
-#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 )
-#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
-#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 )
-#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
-#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 )
-#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 )
-#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
-#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 )
-#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 )
-#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 )
-#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 )
-#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 )
-#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | 11 )
-#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 )
-#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | 12 )
-#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 )
-#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
-#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 )
-#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 )
-#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 )
-#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
-#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
-#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 )
-#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 )
-#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 )
-#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 )
-#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 )
-#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 )
-#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 )
-#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 )
-#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 )
-#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 )
-#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
-#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
-#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
-#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
-#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 )
-#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 )
-#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
-#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
-#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 )
-#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 )
-#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
-#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
-#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
-#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
-#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
-#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 )
-#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 )
-#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 )
-#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 )
-#define PC24_BIN_UART3_RI ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 )
-#define PC25_BIN_UART3_DSR ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 )
-#define PC26_AOUT_UART3_DTR ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 )
-#define PC27_BIN_UART3_DCD ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 )
-#define PC28_BIN_UART3_CTS ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 )
-#define PC29_AOUT_UART3_RTS ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 )
-#define PC30_BIN_UART3_TX ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 )
-#define PC31_AOUT_UART3_RX ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
-#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
-#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 )
-#define PD7_AF_UART2_DTR ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
-#define PD7_AIN_SPI2_SCLK ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
-#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 )
-#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
-#define PD8_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 )
-#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 )
-#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
-#define PD9_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 )
-#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
-#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
-#define PD10_AIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 )
-#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
-#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
-#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
-#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
-#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
-#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
-#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
-#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
-#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
-#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
-#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
-#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
-#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
-#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
-#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
-#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
-#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
-#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
-#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
-#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
-#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 )
-#define PD31_BIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 )
-
-/*
- * PWM controller
- */
-#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */
-#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */
-#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */
-#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */
-
-#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */
-#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */
-#define PWMC_SWR (0x01<<16) /* Software Reset */
-#define PWMC_CLKSRC (0x01<<15) /* Clock Source */
-#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */
-#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */
-#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */
-#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */
-#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */
-#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */
-#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */
-
-#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */
-#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */
-#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */
-
-/*
- * DMA Controller
- */
-#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */
-#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */
-#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */
-#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */
-#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */
-#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */
-#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */
-#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */
-#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */
-#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */
-#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */
-#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */
-#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */
-#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */
-#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */
-#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */
-#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */
-#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */
-#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */
-#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */
-#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */
-#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */
-
-#define DCR_DRST (1<<1)
-#define DCR_DEN (1<<0)
-#define DBTOCR_EN (1<<15)
-#define DBTOCR_CNT(x) ((x) & 0x7fff )
-#define CNTR_CNT(x) ((x) & 0xffffff )
-#define CCR_DMOD_LINEAR ( 0x0 << 12 )
-#define CCR_DMOD_2D ( 0x1 << 12 )
-#define CCR_DMOD_FIFO ( 0x2 << 12 )
-#define CCR_DMOD_EOBFIFO ( 0x3 << 12 )
-#define CCR_SMOD_LINEAR ( 0x0 << 10 )
-#define CCR_SMOD_2D ( 0x1 << 10 )
-#define CCR_SMOD_FIFO ( 0x2 << 10 )
-#define CCR_SMOD_EOBFIFO ( 0x3 << 10 )
-#define CCR_MDIR_DEC (1<<9)
-#define CCR_MSEL_B (1<<8)
-#define CCR_DSIZ_32 ( 0x0 << 6 )
-#define CCR_DSIZ_8 ( 0x1 << 6 )
-#define CCR_DSIZ_16 ( 0x2 << 6 )
-#define CCR_SSIZ_32 ( 0x0 << 4 )
-#define CCR_SSIZ_8 ( 0x1 << 4 )
-#define CCR_SSIZ_16 ( 0x2 << 4 )
-#define CCR_REN (1<<3)
-#define CCR_RPT (1<<2)
-#define CCR_FRC (1<<1)
-#define CCR_CEN (1<<0)
-#define RTOR_EN (1<<15)
-#define RTOR_CLK (1<<14)
-#define RTOR_PSC (1<<13)
-
-/*
- * Interrupt controller
- */
-
-#define IMX_INTCNTL __REG(IMX_AITC_BASE+0x00)
-#define INTCNTL_FIAD (1<<19)
-#define INTCNTL_NIAD (1<<20)
-
-#define IMX_NIMASK __REG(IMX_AITC_BASE+0x04)
-#define IMX_INTENNUM __REG(IMX_AITC_BASE+0x08)
-#define IMX_INTDISNUM __REG(IMX_AITC_BASE+0x0c)
-#define IMX_INTENABLEH __REG(IMX_AITC_BASE+0x10)
-#define IMX_INTENABLEL __REG(IMX_AITC_BASE+0x14)
-
-/*
- * General purpose timers
- */
-#define IMX_TCTL(x) __REG( 0x00 + (x))
-#define TCTL_SWR (1<<15)
-#define TCTL_FRR (1<<8)
-#define TCTL_CAP_RIS (1<<6)
-#define TCTL_CAP_FAL (2<<6)
-#define TCTL_CAP_RIS_FAL (3<<6)
-#define TCTL_OM (1<<5)
-#define TCTL_IRQEN (1<<4)
-#define TCTL_CLK_PCLK1 (1<<1)
-#define TCTL_CLK_PCLK1_16 (2<<1)
-#define TCTL_CLK_TIN (3<<1)
-#define TCTL_CLK_32 (4<<1)
-#define TCTL_TEN (1<<0)
-
-#define IMX_TPRER(x) __REG( 0x04 + (x))
-#define IMX_TCMP(x) __REG( 0x08 + (x))
-#define IMX_TCR(x) __REG( 0x0C + (x))
-#define IMX_TCN(x) __REG( 0x10 + (x))
-#define IMX_TSTAT(x) __REG( 0x14 + (x))
-#define TSTAT_CAPT (1<<1)
-#define TSTAT_COMP (1<<0)
-
-#endif // _IMX_REGS_H
diff --git a/arch/arm/mach-imx/include/mach/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h
deleted file mode 100644
index d54eb1d..0000000
--- a/arch/arm/mach-imx/include/mach/imx-uart.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-
-struct imxuart_platform_data {
- int (*init)(struct platform_device *pdev);
- void (*exit)(struct platform_device *pdev);
- unsigned int flags;
-};
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
deleted file mode 100644
index 67812c5a..0000000
--- a/arch/arm/mach-imx/include/mach/irqs.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * arch/arm/mach-imxads/include/mach/irqs.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ARM_IRQS_H__
-#define __ARM_IRQS_H__
-
-/* Use the imx definitions */
-#include <mach/hardware.h>
-
-/*
- * IMX Interrupt numbers
- *
- */
-#define INT_SOFTINT 0
-#define CSI_INT 6
-#define DSPA_MAC_INT 7
-#define DSPA_INT 8
-#define COMP_INT 9
-#define MSHC_XINT 10
-#define GPIO_INT_PORTA 11
-#define GPIO_INT_PORTB 12
-#define GPIO_INT_PORTC 13
-#define LCDC_INT 14
-#define SIM_INT 15
-#define SIM_DATA_INT 16
-#define RTC_INT 17
-#define RTC_SAMINT 18
-#define UART2_MINT_PFERR 19
-#define UART2_MINT_RTS 20
-#define UART2_MINT_DTR 21
-#define UART2_MINT_UARTC 22
-#define UART2_MINT_TX 23
-#define UART2_MINT_RX 24
-#define UART1_MINT_PFERR 25
-#define UART1_MINT_RTS 26
-#define UART1_MINT_DTR 27
-#define UART1_MINT_UARTC 28
-#define UART1_MINT_TX 29
-#define UART1_MINT_RX 30
-#define VOICE_DAC_INT 31
-#define VOICE_ADC_INT 32
-#define PEN_DATA_INT 33
-#define PWM_INT 34
-#define SDHC_INT 35
-#define I2C_INT 39
-#define CSPI_INT 41
-#define SSI_TX_INT 42
-#define SSI_TX_ERR_INT 43
-#define SSI_RX_INT 44
-#define SSI_RX_ERR_INT 45
-#define TOUCH_INT 46
-#define USBD_INT0 47
-#define USBD_INT1 48
-#define USBD_INT2 49
-#define USBD_INT3 50
-#define USBD_INT4 51
-#define USBD_INT5 52
-#define USBD_INT6 53
-#define BTSYS_INT 55
-#define BTTIM_INT 56
-#define BTWUI_INT 57
-#define TIM2_INT 58
-#define TIM1_INT 59
-#define DMA_ERR 60
-#define DMA_INT 61
-#define GPIO_INT_PORTD 62
-
-#define IMX_IRQS (64)
-
-/* note: the IMX has four gpio ports (A-D), but only
- * the following pins are connected to the outside
- * world:
- *
- * PORT A: bits 0-31
- * PORT B: bits 8-31
- * PORT C: bits 3-17
- * PORT D: bits 6-31
- *
- * We map these interrupts straight on. As a result we have
- * several holes in the interrupt mapping. We do this for two
- * reasons:
- * - mapping the interrupts without holes would get
- * far more complicated
- * - Motorola could well decide to bring some processor
- * with more pins connected
- */
-
-#define IRQ_GPIOA(x) (IMX_IRQS + x)
-#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
-
-/* all normal IRQs can be FIQs */
-#define FIQ_START 0
-/* switch betwean IRQ and FIQ */
-extern int imx_set_irq_fiq(unsigned int irq, unsigned int type);
-
-#define NR_IRQS (IRQ_GPIOD(32) + 1)
-#define IRQ_GPIO(x)
-#endif
diff --git a/arch/arm/mach-imx/include/mach/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h
deleted file mode 100644
index 4712f35..0000000
--- a/arch/arm/mach-imx/include/mach/mmc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct device;
-
-struct imxmmc_platform_data {
- int (*card_present)(struct device *);
- int (*get_ro)(struct device *);
-};
-
-extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/mx1ads.h b/arch/arm/mach-imx/include/mach/mx1ads.h
deleted file mode 100644
index def05d5..0000000
--- a/arch/arm/mach-imx/include/mach/mx1ads.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/mx1ads.h
- *
- * Copyright (C) 2004 Robert Schwebel, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_MX1ADS_H
-#define __ASM_ARCH_MX1ADS_H
-
-/* ------------------------------------------------------------------------ */
-/* Memory Map for the M9328MX1ADS (MX1ADS) Board */
-/* ------------------------------------------------------------------------ */
-
-#define MX1ADS_FLASH_PHYS 0x10000000
-#define MX1ADS_FLASH_SIZE (16*1024*1024)
-
-#define IMX_FB_PHYS (0x0C000000 - 0x40000)
-
-#define CLK32 32000
-
-#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/arch/arm/mach-imx/include/mach/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h
deleted file mode 100644
index 4186430..0000000
--- a/arch/arm/mach-imx/include/mach/spi_imx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/spi_imx.h
- *
- * Copyright (C) 2006 SWAPP
- * Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * Initial version inspired by:
- * linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef SPI_IMX_H_
-#define SPI_IMX_H_
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @num_chipselect: chipselects are used to distinguish individual
- * SPI slaves, and are numbered from zero to num_chipselects - 1.
- * each slave has a chipselect signal, but it's common that not
- * every chipselect is connected to a slave.
- * @enable_dma: if true enables DMA driven transfers.
-*/
-struct spi_imx_master {
- u8 num_chipselect;
- u8 enable_dma:1;
-};
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_chip - spi_board_info.controller_data for SPI
- * slave devices, copied to spi_device.controller_data.
- * @enable_loopback : used for test purpouse to internally connect RX and TX
- * sections.
- * @enable_dma : enables dma transfer (provided that controller driver has
- * dma enabled too).
- * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
- * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
- * @cs_control : function pointer to board-specific function to assert/deassert
- * I/O port to control HW generation of devices chip-select.
-*/
-struct spi_imx_chip {
- u8 enable_loopback:1;
- u8 enable_dma:1;
- u8 ins_ss_pulse:1;
- u16 bclk_wait:15;
- void (*cs_control)(u32 control);
-};
-
-/* Chip-select state */
-#define SPI_CS_ASSERT (1 << 0)
-#define SPI_CS_DEASSERT (1 << 1)
-/*-------------------------------------------------------------------------*/
-
-
-#endif /* SPI_IMX_H_*/
diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h
deleted file mode 100644
index 70523e67..0000000
--- a/arch/arm/mach-imx/include/mach/uncompress.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * arch/arm/mach-imxads/include/mach/uncompress.h
- *
- *
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define UART1_BASE 0x206000
-#define UART2_BASE 0x207000
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR 0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. We search for the first enabled
- * port in the most probable order. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
- unsigned long serial_port;
-
- do {
- serial_port = UART1_BASE;
- if ( UART(UCR1) & UCR1_UARTEN )
- break;
- serial_port = UART2_BASE;
- if ( UART(UCR1) & UCR1_UARTEN )
- break;
- return;
- } while(0);
-
- while (!(UART(USR2) & USR2_TXFE))
- barrier();
-
- UART(TXR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
deleted file mode 100644
index 531b95d..0000000
--- a/arch/arm/mach-imx/irq.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/irq.c
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * 03/03/2004 Sascha Hauer <sascha@saschahauer.de>
- * Copied from the motorola bsp package and added gpio demux
- * interrupt handler
- */
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-/*
- *
- * We simply use the ENABLE DISABLE registers inside of the IMX
- * to turn on/off specific interrupts.
- *
- */
-
-#define INTCNTL_OFF 0x00
-#define NIMASK_OFF 0x04
-#define INTENNUM_OFF 0x08
-#define INTDISNUM_OFF 0x0C
-#define INTENABLEH_OFF 0x10
-#define INTENABLEL_OFF 0x14
-#define INTTYPEH_OFF 0x18
-#define INTTYPEL_OFF 0x1C
-#define NIPRIORITY_OFF(x) (0x20+4*(7-(x)))
-#define NIVECSR_OFF 0x40
-#define FIVECSR_OFF 0x44
-#define INTSRCH_OFF 0x48
-#define INTSRCL_OFF 0x4C
-#define INTFRCH_OFF 0x50
-#define INTFRCL_OFF 0x54
-#define NIPNDH_OFF 0x58
-#define NIPNDL_OFF 0x5C
-#define FIPNDH_OFF 0x60
-#define FIPNDL_OFF 0x64
-
-#define VA_AITC_BASE IO_ADDRESS(IMX_AITC_BASE)
-#define IMX_AITC_INTCNTL (VA_AITC_BASE + INTCNTL_OFF)
-#define IMX_AITC_NIMASK (VA_AITC_BASE + NIMASK_OFF)
-#define IMX_AITC_INTENNUM (VA_AITC_BASE + INTENNUM_OFF)
-#define IMX_AITC_INTDISNUM (VA_AITC_BASE + INTDISNUM_OFF)
-#define IMX_AITC_INTENABLEH (VA_AITC_BASE + INTENABLEH_OFF)
-#define IMX_AITC_INTENABLEL (VA_AITC_BASE + INTENABLEL_OFF)
-#define IMX_AITC_INTTYPEH (VA_AITC_BASE + INTTYPEH_OFF)
-#define IMX_AITC_INTTYPEL (VA_AITC_BASE + INTTYPEL_OFF)
-#define IMX_AITC_NIPRIORITY(x) (VA_AITC_BASE + NIPRIORITY_OFF(x))
-#define IMX_AITC_NIVECSR (VA_AITC_BASE + NIVECSR_OFF)
-#define IMX_AITC_FIVECSR (VA_AITC_BASE + FIVECSR_OFF)
-#define IMX_AITC_INTSRCH (VA_AITC_BASE + INTSRCH_OFF)
-#define IMX_AITC_INTSRCL (VA_AITC_BASE + INTSRCL_OFF)
-#define IMX_AITC_INTFRCH (VA_AITC_BASE + INTFRCH_OFF)
-#define IMX_AITC_INTFRCL (VA_AITC_BASE + INTFRCL_OFF)
-#define IMX_AITC_NIPNDH (VA_AITC_BASE + NIPNDH_OFF)
-#define IMX_AITC_NIPNDL (VA_AITC_BASE + NIPNDL_OFF)
-#define IMX_AITC_FIPNDH (VA_AITC_BASE + FIPNDH_OFF)
-#define IMX_AITC_FIPNDL (VA_AITC_BASE + FIPNDL_OFF)
-
-#if 0
-#define DEBUG_IRQ(fmt...) printk(fmt)
-#else
-#define DEBUG_IRQ(fmt...) do { } while (0)
-#endif
-
-static void
-imx_mask_irq(unsigned int irq)
-{
- __raw_writel(irq, IMX_AITC_INTDISNUM);
-}
-
-static void
-imx_unmask_irq(unsigned int irq)
-{
- __raw_writel(irq, IMX_AITC_INTENNUM);
-}
-
-#ifdef CONFIG_FIQ
-int imx_set_irq_fiq(unsigned int irq, unsigned int type)
-{
- unsigned int irqt;
-
- if (irq >= IMX_IRQS)
- return -EINVAL;
-
- if (irq < IMX_IRQS / 2) {
- irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq);
- __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL);
- } else {
- irq -= IMX_IRQS / 2;
- irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq);
- __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH);
- }
-
- return 0;
-}
-EXPORT_SYMBOL(imx_set_irq_fiq);
-#endif /* CONFIG_FIQ */
-
-static int
-imx_gpio_irq_type(unsigned int _irq, unsigned int type)
-{
- unsigned int irq_type = 0, irq, reg, bit;
-
- irq = _irq - IRQ_GPIOA(0);
- reg = irq >> 5;
- bit = 1 << (irq % 32);
-
- if (type == IRQ_TYPE_PROBE) {
- /* Don't mess with enabled GPIOs using preconfigured edges or
- GPIOs set to alternate function during probe */
- /* TODO: support probe */
-// if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) &
-// GPIO_bit(gpio))
-// return 0;
-// if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
-// return 0;
-// type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
- }
-
- GIUS(reg) |= bit;
- DDIR(reg) &= ~(bit);
-
- DEBUG_IRQ("setting type of irq %d to ", _irq);
-
- if (type & IRQ_TYPE_EDGE_RISING) {
- DEBUG_IRQ("rising edges\n");
- irq_type = 0x0;
- }
- if (type & IRQ_TYPE_EDGE_FALLING) {
- DEBUG_IRQ("falling edges\n");
- irq_type = 0x1;
- }
- if (type & IRQ_TYPE_LEVEL_LOW) {
- DEBUG_IRQ("low level\n");
- irq_type = 0x3;
- }
- if (type & IRQ_TYPE_LEVEL_HIGH) {
- DEBUG_IRQ("high level\n");
- irq_type = 0x2;
- }
-
- if (irq % 32 < 16) {
- ICR1(reg) = (ICR1(reg) & ~(0x3 << ((irq % 16) * 2))) |
- (irq_type << ((irq % 16) * 2));
- } else {
- ICR2(reg) = (ICR2(reg) & ~(0x3 << ((irq % 16) * 2))) |
- (irq_type << ((irq % 16) * 2));
- }
-
- return 0;
-
-}
-
-static void
-imx_gpio_ack_irq(unsigned int irq)
-{
- DEBUG_IRQ("%s: irq %d\n", __func__, irq);
- ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_mask_irq(unsigned int irq)
-{
- DEBUG_IRQ("%s: irq %d\n", __func__, irq);
- IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32));
-}
-
-static void
-imx_gpio_unmask_irq(unsigned int irq)
-{
- DEBUG_IRQ("%s: irq %d\n", __func__, irq);
- IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_handler(unsigned int mask, unsigned int irq,
- struct irq_desc *desc)
-{
- while (mask) {
- if (mask & 1) {
- DEBUG_IRQ("handling irq %d\n", irq);
- generic_handle_irq(irq);
- }
- irq++;
- mask >>= 1;
- }
-}
-
-static void
-imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = ISR(0);
- irq = IRQ_GPIOA(0);
- imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = ISR(1);
- irq = IRQ_GPIOB(0);
- imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = ISR(2);
- irq = IRQ_GPIOC(0);
- imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = ISR(3);
- irq = IRQ_GPIOD(0);
- imx_gpio_handler(mask, irq, desc);
-}
-
-static struct irq_chip imx_internal_chip = {
- .name = "MPU",
- .ack = imx_mask_irq,
- .mask = imx_mask_irq,
- .unmask = imx_unmask_irq,
-};
-
-static struct irq_chip imx_gpio_chip = {
- .name = "GPIO",
- .ack = imx_gpio_ack_irq,
- .mask = imx_gpio_mask_irq,
- .unmask = imx_gpio_unmask_irq,
- .set_type = imx_gpio_irq_type,
-};
-
-void __init
-imx_init_irq(void)
-{
- unsigned int irq;
-
- DEBUG_IRQ("Initializing imx interrupts\n");
-
- /* Disable all interrupts initially. */
- /* Do not rely on the bootloader. */
- __raw_writel(0, IMX_AITC_INTENABLEH);
- __raw_writel(0, IMX_AITC_INTENABLEL);
-
- /* Mask all GPIO interrupts as well */
- IMR(0) = 0;
- IMR(1) = 0;
- IMR(2) = 0;
- IMR(3) = 0;
-
- for (irq = 0; irq < IMX_IRQS; irq++) {
- set_irq_chip(irq, &imx_internal_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) {
- set_irq_chip(irq, &imx_gpio_chip);
- set_irq_handler(irq, handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- set_irq_chained_handler(GPIO_INT_PORTA, imx_gpioa_demux_handler);
- set_irq_chained_handler(GPIO_INT_PORTB, imx_gpiob_demux_handler);
- set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler);
- set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler);
-
- /* Release masking of interrupts according to priority */
- __raw_writel(-1, IMX_AITC_NIMASK);
-
-#ifdef CONFIG_FIQ
- /* Initialize FIQ */
- init_FIQ();
-#endif
-}
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
deleted file mode 100644
index 1d48f27..0000000
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/leds-mx1ads.c
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/leds.h>
-#include "leds.h"
-
-/*
- * The MX1ADS Board has only one usable LED,
- * so select only the timer led or the
- * cpu usage led
- */
-void
-mx1ads_leds_event(led_event_t ledevt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (ledevt) {
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- DR(0) &= ~(1<<2);
- break;
-
- case led_idle_end:
- DR(0) |= 1<<2;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- DR(0) ^= 1<<2;
-#endif
- default:
- break;
- }
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-imx/leds.c b/arch/arm/mach-imx/leds.c
deleted file mode 100644
index cf30803..0000000
--- a/arch/arm/mach-imx/leds.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/leds.c
- *
- * Copyright (C) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-leds_init(void)
-{
- if (machine_is_mx1ads()) {
- leds_event = mx1ads_leds_event;
- }
-
- return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-imx/leds.h b/arch/arm/mach-imx/leds.h
deleted file mode 100644
index 49dc1c1..0000000
--- a/arch/arm/mach-imx/leds.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-imx/leds.h
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * blinky lights for IMX-based systems
- *
- */
-extern void mx1ads_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
deleted file mode 100644
index 87fa1ff..0000000
--- a/arch/arm/mach-imx/mx1ads.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/arm/mach-imx/mx1ads.c
- *
- * Initially based on:
- * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/system.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-#include <linux/interrupt.h>
-#include "generic.h"
-
-static struct resource cs89x0_resources[] = {
- [0] = {
- .start = IMX_CS4_PHYS + 0x300,
- .end = IMX_CS4_PHYS + 0x300 + 16,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_GPIOC(17),
- .end = IRQ_GPIOC(17),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cs89x0_device = {
- .name = "cirrus-cs89x0",
- .num_resources = ARRAY_SIZE(cs89x0_resources),
- .resource = cs89x0_resources,
-};
-
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource imx_uart1_resources[] = {
- [0] = {
- .start = 0x00206000,
- .end = 0x002060FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (UART1_MINT_RX),
- .end = (UART1_MINT_RX),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = (UART1_MINT_TX),
- .end = (UART1_MINT_TX),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = UART1_MINT_RTS,
- .end = UART1_MINT_RTS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device imx_uart1_device = {
- .name = "imx-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(imx_uart1_resources),
- .resource = imx_uart1_resources,
- .dev = {
- .platform_data = &uart_pdata,
- }
-};
-
-static struct resource imx_uart2_resources[] = {
- [0] = {
- .start = 0x00207000,
- .end = 0x002070FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (UART2_MINT_RX),
- .end = (UART2_MINT_RX),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = (UART2_MINT_TX),
- .end = (UART2_MINT_TX),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = UART2_MINT_RTS,
- .end = UART2_MINT_RTS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device imx_uart2_device = {
- .name = "imx-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(imx_uart2_resources),
- .resource = imx_uart2_resources,
- .dev = {
- .platform_data = &uart_pdata,
- }
-};
-
-static struct platform_device *devices[] __initdata = {
- &cs89x0_device,
- &imx_uart1_device,
- &imx_uart2_device,
-};
-
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
-static int mx1ads_mmc_card_present(struct device *dev)
-{
- /* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
- return (SSR(1) & (1 << 20) ? 0 : 1);
-}
-
-static struct imxmmc_platform_data mx1ads_mmc_info = {
- .card_present = mx1ads_mmc_card_present,
-};
-#endif
-
-static void __init
-mx1ads_init(void)
-{
-#ifdef CONFIG_LEDS
- imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
-#endif
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
- /* SD/MMC card detect */
- imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
- imx_set_mmc_info(&mx1ads_mmc_info);
-#endif
-
- imx_gpio_mode(PC9_PF_UART1_CTS);
- imx_gpio_mode(PC10_PF_UART1_RTS);
- imx_gpio_mode(PC11_PF_UART1_TXD);
- imx_gpio_mode(PC12_PF_UART1_RXD);
-
- imx_gpio_mode(PB28_PF_UART2_CTS);
- imx_gpio_mode(PB29_PF_UART2_RTS);
- imx_gpio_mode(PB30_PF_UART2_TXD);
- imx_gpio_mode(PB31_PF_UART2_RXD);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init
-mx1ads_map_io(void)
-{
- imx_map_io();
-}
-
-MACHINE_START(MX1ADS, "Motorola MX1ADS")
- /* Maintainer: Sascha Hauer, Pengutronix */
- .phys_io = 0x00200000,
- .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc,
- .boot_params = 0x08000100,
- .map_io = mx1ads_map_io,
- .init_irq = imx_init_irq,
- .timer = &imx_timer,
- .init_machine = mx1ads_init,
-MACHINE_END
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
deleted file mode 100644
index 5aef18b..0000000
--- a/arch/arm/mach-imx/time.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/time.c
- *
- * Copyright (C) 2000-2001 Deep Blue Solutions
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/irq.h>
-#include <asm/mach/time.h>
-
-/* Use timer 1 as system timer */
-#define TIMER_BASE IMX_TIM1_BASE
-
-static struct clock_event_device clockevent_imx;
-static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-imx_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &clockevent_imx;
- uint32_t tstat;
- irqreturn_t ret = IRQ_NONE;
-
- /* clear the interrupt */
- tstat = IMX_TSTAT(TIMER_BASE);
- IMX_TSTAT(TIMER_BASE) = 0;
-
- if (tstat & TSTAT_COMP) {
- evt->event_handler(evt);
- ret = IRQ_HANDLED;
- }
-
- return ret;
-}
-
-static struct irqaction imx_timer_irq = {
- .name = "i.MX Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = imx_timer_interrupt,
-};
-
-/*
- * Set up timer hardware into expected mode and state.
- */
-static void __init imx_timer_hardware_init(void)
-{
- /*
- * Initialise to a known state (all timers off, and timing reset)
- */
- IMX_TCTL(TIMER_BASE) = 0;
- IMX_TPRER(TIMER_BASE) = 0;
-
- IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
-}
-
-cycle_t imx_get_cycles(struct clocksource *cs)
-{
- return IMX_TCN(TIMER_BASE);
-}
-
-static struct clocksource clocksource_imx = {
- .name = "imx_timer1",
- .rating = 200,
- .read = imx_get_cycles,
- .mask = 0xFFFFFFFF,
- .shift = 20,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init imx_clocksource_init(unsigned long rate)
-{
- clocksource_imx.mult =
- clocksource_hz2mult(rate, clocksource_imx.shift);
- clocksource_register(&clocksource_imx);
-
- return 0;
-}
-
-static int imx_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long tcmp;
-
- tcmp = IMX_TCN(TIMER_BASE) + evt;
- IMX_TCMP(TIMER_BASE) = tcmp;
-
- return (int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0 ? -ETIME : 0;
-}
-
-#ifdef DEBUG
-static const char *clock_event_mode_label[]={
- [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
- [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT",
- [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
- [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED"
-};
-#endif /*DEBUG*/
-
-static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
-{
- unsigned long flags;
-
- /*
- * The timer interrupt generation is disabled at least
- * for enough time to call imx_set_next_event()
- */
- local_irq_save(flags);
- /* Disable interrupt in GPT module */
- IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN;
- if (mode != clockevent_mode) {
- /* Set event time into far-far future */
- IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3;
- /* Clear pending interrupt */
- IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP;
- }
-
-#ifdef DEBUG
- printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n",
- clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]);
-#endif /*DEBUG*/
-
- /* Remember timer mode */
- clockevent_mode = mode;
- local_irq_restore(flags);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- printk(KERN_ERR "imx_set_mode: Periodic mode is not supported for i.MX\n");
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /*
- * Do not put overhead of interrupt enable/disable into
- * imx_set_next_event(), the core has about 4 minutes
- * to call imx_set_next_event() or shutdown clock after
- * mode switching
- */
- local_irq_save(flags);
- IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN;
- local_irq_restore(flags);
- break;
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_RESUME:
- /* Left event sources disabled, no more interrupts appears */
- break;
- }
-}
-
-static struct clock_event_device clockevent_imx = {
- .name = "imx_timer1",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
- .set_mode = imx_set_mode,
- .set_next_event = imx_set_next_event,
- .rating = 200,
-};
-
-static int __init imx_clockevent_init(unsigned long rate)
-{
- clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC,
- clockevent_imx.shift);
- clockevent_imx.max_delta_ns =
- clockevent_delta2ns(0xfffffffe, &clockevent_imx);
- clockevent_imx.min_delta_ns =
- clockevent_delta2ns(0xf, &clockevent_imx);
-
- clockevent_imx.cpumask = cpumask_of(0);
-
- clockevents_register_device(&clockevent_imx);
-
- return 0;
-}
-
-extern int imx_clocks_init(void);
-
-static void __init imx_timer_init(void)
-{
- struct clk *clk;
- unsigned long rate;
-
- imx_clocks_init();
-
- clk = clk_get(NULL, "perclk1");
- clk_enable(clk);
- rate = clk_get_rate(clk);
-
- imx_timer_hardware_init();
- imx_clocksource_init(rate);
-
- imx_clockevent_init(rate);
-
- /*
- * Make irqs happen for the system timer
- */
- setup_irq(TIM1_INT, &imx_timer_irq);
-}
-
-struct sys_timer imx_timer = {
- .init = imx_timer_init,
-};
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 2c5a02b..264f4d5 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -78,6 +78,12 @@ config MACH_IXDP465
IXDP465 Development Platform (Also known as BMP).
For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+config MACH_GORAMO_MLR
+ bool "GORAMO Multi Link Router"
+ help
+ Say 'Y' here if you want your kernel to support GORAMO
+ MultiLink router.
+
config MACH_KIXRP435
bool "KIXRP435"
help
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 2e6bbf9..47d1f60 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
obj-$(CONFIG_MACH_FSG) += fsg-setup.o
+obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
new file mode 100644
index 0000000..a733b8f
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -0,0 +1,507 @@
+/*
+ * Goramo MultiLink router platform code
+ * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl>
+ */
+
+#include <linux/delay.h>
+#include <linux/hdlc.h>
+#include <linux/i2c-gpio.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+#include <asm/mach-types.h>
+#include <asm/system.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/pci.h>
+
+#define xgpio_irq(n) (IRQ_IXP4XX_GPIO ## n)
+#define gpio_irq(n) xgpio_irq(n)
+
+#define SLOT_ETHA 0x0B /* IDSEL = AD21 */
+#define SLOT_ETHB 0x0C /* IDSEL = AD20 */
+#define SLOT_MPCI 0x0D /* IDSEL = AD19 */
+#define SLOT_NEC 0x0E /* IDSEL = AD18 */
+
+#define IRQ_ETHA IRQ_IXP4XX_GPIO4
+#define IRQ_ETHB IRQ_IXP4XX_GPIO5
+#define IRQ_NEC IRQ_IXP4XX_GPIO3
+#define IRQ_MPCI IRQ_IXP4XX_GPIO12
+
+/* GPIO lines */
+#define GPIO_SCL 0
+#define GPIO_SDA 1
+#define GPIO_STR 2
+#define GPIO_HSS0_DCD_N 6
+#define GPIO_HSS1_DCD_N 7
+#define GPIO_HSS0_CTS_N 10
+#define GPIO_HSS1_CTS_N 11
+#define GPIO_HSS1_RTS_N 13
+#define GPIO_HSS0_RTS_N 14
+
+/* Control outputs from 74HC4094 */
+#define CONTROL_HSS0_CLK_INT 0
+#define CONTROL_HSS1_CLK_INT 1
+#define CONTROL_HSS0_DTR_N 2
+#define CONTROL_HSS1_DTR_N 3
+#define CONTROL_EXT 4
+#define CONTROL_AUTO_RESET 5
+#define CONTROL_PCI_RESET_N 6
+#define CONTROL_EEPROM_WC_N 7
+
+/* offsets from start of flash ROM = 0x50000000 */
+#define CFG_ETH0_ADDRESS 0x40 /* 6 bytes */
+#define CFG_ETH1_ADDRESS 0x46 /* 6 bytes */
+#define CFG_REV 0x4C /* u32 */
+#define CFG_SDRAM_SIZE 0x50 /* u32 */
+#define CFG_SDRAM_CONF 0x54 /* u32 */
+#define CFG_SDRAM_MODE 0x58 /* u32 */
+#define CFG_SDRAM_REFRESH 0x5C /* u32 */
+
+#define CFG_HW_BITS 0x60 /* u32 */
+#define CFG_HW_USB_PORTS 0x00000007 /* 0 = no NEC chip, 1-5 = ports # */
+#define CFG_HW_HAS_PCI_SLOT 0x00000008
+#define CFG_HW_HAS_ETH0 0x00000010
+#define CFG_HW_HAS_ETH1 0x00000020
+#define CFG_HW_HAS_HSS0 0x00000040
+#define CFG_HW_HAS_HSS1 0x00000080
+#define CFG_HW_HAS_UART0 0x00000100
+#define CFG_HW_HAS_UART1 0x00000200
+#define CFG_HW_HAS_EEPROM 0x00000400
+
+#define FLASH_CMD_READ_ARRAY 0xFF
+#define FLASH_CMD_READ_ID 0x90
+#define FLASH_SER_OFF 0x102 /* 0x81 in 16-bit mode */
+
+static u32 hw_bits = 0xFFFFFFFD; /* assume all hardware present */;
+static u8 control_value;
+
+static void set_scl(u8 value)
+{
+ gpio_line_set(GPIO_SCL, !!value);
+ udelay(3);
+}
+
+static void set_sda(u8 value)
+{
+ gpio_line_set(GPIO_SDA, !!value);
+ udelay(3);
+}
+
+static void set_str(u8 value)
+{
+ gpio_line_set(GPIO_STR, !!value);
+ udelay(3);
+}
+
+static inline void set_control(int line, int value)
+{
+ if (value)
+ control_value |= (1 << line);
+ else
+ control_value &= ~(1 << line);
+}
+
+
+static void output_control(void)
+{
+ int i;
+
+ gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+
+ for (i = 0; i < 8; i++) {
+ set_scl(0);
+ set_sda(control_value & (0x80 >> i)); /* MSB first */
+ set_scl(1); /* active edge */
+ }
+
+ set_str(1);
+ set_str(0);
+
+ set_scl(0);
+ set_sda(1); /* Be ready for START */
+ set_scl(1);
+}
+
+
+static void (*set_carrier_cb_tab[2])(void *pdev, int carrier);
+
+static int hss_set_clock(int port, unsigned int clock_type)
+{
+ int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT;
+
+ switch (clock_type) {
+ case CLOCK_DEFAULT:
+ case CLOCK_EXT:
+ set_control(ctrl_int, 0);
+ output_control();
+ return CLOCK_EXT;
+
+ case CLOCK_INT:
+ set_control(ctrl_int, 1);
+ output_control();
+ return CLOCK_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static irqreturn_t hss_dcd_irq(int irq, void *pdev)
+{
+ int i, port = (irq == gpio_irq(GPIO_HSS1_DCD_N));
+ gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+ set_carrier_cb_tab[port](pdev, !i);
+ return IRQ_HANDLED;
+}
+
+
+static int hss_open(int port, void *pdev,
+ void (*set_carrier_cb)(void *pdev, int carrier))
+{
+ int i, irq;
+
+ if (!port)
+ irq = gpio_irq(GPIO_HSS0_DCD_N);
+ else
+ irq = gpio_irq(GPIO_HSS1_DCD_N);
+
+ gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+ set_carrier_cb(pdev, !i);
+
+ set_carrier_cb_tab[!!port] = set_carrier_cb;
+
+ if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) {
+ printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n",
+ irq, i);
+ return i;
+ }
+
+ set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
+ output_control();
+ gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
+ return 0;
+}
+
+static void hss_close(int port, void *pdev)
+{
+ free_irq(port ? gpio_irq(GPIO_HSS1_DCD_N) : gpio_irq(GPIO_HSS0_DCD_N),
+ pdev);
+ set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
+
+ set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
+ output_control();
+ gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
+}
+
+
+/* Flash memory */
+static struct flash_platform_data flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+};
+
+static struct resource flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device device_flash = {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = { .platform_data = &flash_data },
+ .num_resources = 1,
+ .resource = &flash_resource,
+};
+
+
+/* I^2C interface */
+static struct i2c_gpio_platform_data i2c_data = {
+ .sda_pin = GPIO_SDA,
+ .scl_pin = GPIO_SCL,
+};
+
+static struct platform_device device_i2c = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = { .platform_data = &i2c_data },
+};
+
+
+/* IXP425 2 UART ports */
+static struct resource uart_resources[] = {
+ {
+ .start = IXP4XX_UART1_BASE_PHYS,
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct plat_serial8250_port uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
+ .membase = (char __iomem *)IXP4XX_UART1_BASE_VIRT +
+ REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char __iomem *)IXP4XX_UART2_BASE_VIRT +
+ REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ { },
+};
+
+static struct platform_device device_uarts = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = uart_data,
+ .num_resources = 2,
+ .resource = uart_resources,
+};
+
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info eth_plat[] = {
+ {
+ .phy = 0,
+ .rxq = 3,
+ .txreadyq = 32,
+ }, {
+ .phy = 1,
+ .rxq = 4,
+ .txreadyq = 33,
+ }
+};
+
+static struct platform_device device_eth_tab[] = {
+ {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEB,
+ .dev.platform_data = eth_plat,
+ }, {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEC,
+ .dev.platform_data = eth_plat + 1,
+ }
+};
+
+
+/* IXP425 2 synchronous serial ports */
+static struct hss_plat_info hss_plat[] = {
+ {
+ .set_clock = hss_set_clock,
+ .open = hss_open,
+ .close = hss_close,
+ .txreadyq = 34,
+ }, {
+ .set_clock = hss_set_clock,
+ .open = hss_open,
+ .close = hss_close,
+ .txreadyq = 35,
+ }
+};
+
+static struct platform_device device_hss_tab[] = {
+ {
+ .name = "ixp4xx_hss",
+ .id = 0,
+ .dev.platform_data = hss_plat,
+ }, {
+ .name = "ixp4xx_hss",
+ .id = 1,
+ .dev.platform_data = hss_plat + 1,
+ }
+};
+
+
+static struct platform_device *device_tab[6] __initdata = {
+ &device_flash, /* index 0 */
+};
+
+static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr)
+{
+#ifdef __ARMEB__
+ return __raw_readb(flash + addr);
+#else
+ return __raw_readb(flash + (addr ^ 3));
+#endif
+}
+
+static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr)
+{
+#ifdef __ARMEB__
+ return __raw_readw(flash + addr);
+#else
+ return __raw_readw(flash + (addr ^ 2));
+#endif
+}
+
+static void __init gmlr_init(void)
+{
+ u8 __iomem *flash;
+ int i, devices = 1; /* flash */
+
+ ixp4xx_sys_init();
+
+ if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL)
+ printk(KERN_ERR "goramo-mlr: unable to access system"
+ " configuration data\n");
+ else {
+ system_rev = __raw_readl(flash + CFG_REV);
+ hw_bits = __raw_readl(flash + CFG_HW_BITS);
+
+ for (i = 0; i < ETH_ALEN; i++) {
+ eth_plat[0].hwaddr[i] =
+ flash_readb(flash, CFG_ETH0_ADDRESS + i);
+ eth_plat[1].hwaddr[i] =
+ flash_readb(flash, CFG_ETH1_ADDRESS + i);
+ }
+
+ __raw_writew(FLASH_CMD_READ_ID, flash);
+ system_serial_high = flash_readw(flash, FLASH_SER_OFF);
+ system_serial_high <<= 16;
+ system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2);
+ system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4);
+ system_serial_low <<= 16;
+ system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6);
+ __raw_writew(FLASH_CMD_READ_ARRAY, flash);
+
+ iounmap(flash);
+ }
+
+ switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) {
+ case CFG_HW_HAS_UART0:
+ memset(&uart_data[1], 0, sizeof(uart_data[1]));
+ device_uarts.num_resources = 1;
+ break;
+
+ case CFG_HW_HAS_UART1:
+ device_uarts.dev.platform_data = &uart_data[1];
+ device_uarts.resource = &uart_resources[1];
+ device_uarts.num_resources = 1;
+ break;
+ }
+ if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1))
+ device_tab[devices++] = &device_uarts; /* max index 1 */
+
+ if (hw_bits & CFG_HW_HAS_ETH0)
+ device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */
+ if (hw_bits & CFG_HW_HAS_ETH1)
+ device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */
+
+ if (hw_bits & CFG_HW_HAS_HSS0)
+ device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */
+ if (hw_bits & CFG_HW_HAS_HSS1)
+ device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
+
+ if (hw_bits & CFG_HW_HAS_EEPROM)
+ device_tab[devices++] = &device_i2c; /* max index 6 */
+
+ gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN);
+ gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN);
+ set_irq_type(gpio_irq(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
+ set_irq_type(gpio_irq(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
+
+ set_control(CONTROL_HSS0_DTR_N, 1);
+ set_control(CONTROL_HSS1_DTR_N, 1);
+ set_control(CONTROL_EEPROM_WC_N, 1);
+ set_control(CONTROL_PCI_RESET_N, 1);
+ output_control();
+
+ msleep(1); /* Wait for PCI devices to initialize */
+
+ flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+ platform_add_devices(device_tab, devices);
+}
+
+
+#ifdef CONFIG_PCI
+static void __init gmlr_pci_preinit(void)
+{
+ set_irq_type(IRQ_ETHA, IRQ_TYPE_LEVEL_LOW);
+ set_irq_type(IRQ_ETHB, IRQ_TYPE_LEVEL_LOW);
+ set_irq_type(IRQ_NEC, IRQ_TYPE_LEVEL_LOW);
+ set_irq_type(IRQ_MPCI, IRQ_TYPE_LEVEL_LOW);
+ ixp4xx_pci_preinit();
+}
+
+static void __init gmlr_pci_postinit(void)
+{
+ if ((hw_bits & CFG_HW_USB_PORTS) >= 2 &&
+ (hw_bits & CFG_HW_USB_PORTS) < 5) {
+ /* need to adjust number of USB ports on NEC chip */
+ u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0;
+ if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
+ value &= ~7;
+ value |= (hw_bits & CFG_HW_USB_PORTS);
+ ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value);
+ }
+ }
+}
+
+static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ switch(slot) {
+ case SLOT_ETHA: return IRQ_ETHA;
+ case SLOT_ETHB: return IRQ_ETHB;
+ case SLOT_NEC: return IRQ_NEC;
+ default: return IRQ_MPCI;
+ }
+}
+
+static struct hw_pci gmlr_hw_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = gmlr_pci_preinit,
+ .postinit = gmlr_pci_postinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = gmlr_map_irq,
+};
+
+static int __init gmlr_pci_init(void)
+{
+ if (machine_is_goramo_mlr() &&
+ (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT)))
+ pci_common_init(&gmlr_hw_pci);
+ return 0;
+}
+
+subsys_initcall(gmlr_pci_init);
+#endif /* CONFIG_PCI */
+
+
+MACHINE_START(GORAMO_MLR, "MultiLink")
+ /* Maintainer: Krzysztof Halasa */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .boot_params = 0x0100,
+ .init_machine = gmlr_init,
+MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
index def7773..b2ef65d 100644
--- a/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -26,6 +26,8 @@
#define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */
#define IXP46X_PROCESSOR_ID_MASK 0xfffffff0
+#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \
+ IXP42X_PROCESSOR_ID_VALUE)
#define cpu_is_ixp42x() ((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
IXP42X_PROCESSOR_ID_VALUE)
#define cpu_is_ixp43x() ((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
@@ -35,8 +37,11 @@
static inline u32 ixp4xx_read_feature_bits(void)
{
- unsigned int val = ~*IXP4XX_EXP_CFG2;
+ u32 val = ~*IXP4XX_EXP_CFG2;
+ if (cpu_is_ixp42x_rev_a0())
+ return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
+ IXP4XX_FEATURE_AES);
if (cpu_is_ixp42x())
return val & IXP42X_FEATURE_MASK;
if (cpu_is_ixp43x())
diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
index 0cbe6ce..9e7cad2 100644
--- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h
+++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
@@ -15,7 +15,7 @@
#define DEBUG_QMGR 0
#define HALF_QUEUES 32
-#define QUEUES 64 /* only 32 lower queues currently supported */
+#define QUEUES 64
#define MAX_QUEUE_LENGTH 4 /* in dwords */
#define QUEUE_STAT1_EMPTY 1 /* queue status bits */
@@ -110,48 +110,95 @@ static inline u32 qmgr_get_entry(unsigned int queue)
return val;
}
-static inline int qmgr_get_stat1(unsigned int queue)
+static inline int __qmgr_get_stat1(unsigned int queue)
{
extern struct qmgr_regs __iomem *qmgr_regs;
return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
>> ((queue & 7) << 2)) & 0xF;
}
-static inline int qmgr_get_stat2(unsigned int queue)
+static inline int __qmgr_get_stat2(unsigned int queue)
{
extern struct qmgr_regs __iomem *qmgr_regs;
+ BUG_ON(queue >= HALF_QUEUES);
return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
>> ((queue & 0xF) << 1)) & 0x3;
}
+/**
+ * qmgr_stat_empty() - checks if a hardware queue is empty
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue is empty.
+ */
static inline int qmgr_stat_empty(unsigned int queue)
{
- return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
+ BUG_ON(queue >= HALF_QUEUES);
+ return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY;
}
-static inline int qmgr_stat_nearly_empty(unsigned int queue)
+/**
+ * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue is below low watermark.
+ */
+static inline int qmgr_stat_below_low_watermark(unsigned int queue)
{
- return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
+ extern struct qmgr_regs __iomem *qmgr_regs;
+ if (queue >= HALF_QUEUES)
+ return (__raw_readl(&qmgr_regs->statne_h) >>
+ (queue - HALF_QUEUES)) & 0x01;
+ return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY;
}
-static inline int qmgr_stat_nearly_full(unsigned int queue)
+/**
+ * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue is above high watermark
+ */
+static inline int qmgr_stat_above_high_watermark(unsigned int queue)
{
- return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
+ BUG_ON(queue >= HALF_QUEUES);
+ return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL;
}
+/**
+ * qmgr_stat_full() - checks if a hardware queue is full
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue is full.
+ */
static inline int qmgr_stat_full(unsigned int queue)
{
- return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
+ extern struct qmgr_regs __iomem *qmgr_regs;
+ if (queue >= HALF_QUEUES)
+ return (__raw_readl(&qmgr_regs->statf_h) >>
+ (queue - HALF_QUEUES)) & 0x01;
+ return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL;
}
+/**
+ * qmgr_stat_underflow() - checks if a hardware queue experienced underflow
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue experienced underflow.
+ */
static inline int qmgr_stat_underflow(unsigned int queue)
{
- return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
+ return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW;
}
+/**
+ * qmgr_stat_overflow() - checks if a hardware queue experienced overflow
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue experienced overflow.
+ */
static inline int qmgr_stat_overflow(unsigned int queue)
{
- return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
+ return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW;
}
#endif
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index 7bb8e77..47ac69c 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -386,15 +386,6 @@ static int npe_reset(struct npe *npe)
/* reset the NPE */
ixp4xx_write_feature_bits(val &
~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
- for (i = 0; i < MAX_RETRIES; i++) {
- if (!(ixp4xx_read_feature_bits() &
- (IXP4XX_FEATURE_RESET_NPEA << npe->id)))
- break; /* reset completed */
- udelay(1);
- }
- if (i == MAX_RETRIES)
- return -ETIMEDOUT;
-
/* deassert reset */
ixp4xx_write_feature_bits(val |
(IXP4XX_FEATURE_RESET_NPEA << npe->id));
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index bfddc73..bfdbe4b 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -18,8 +18,8 @@ struct qmgr_regs __iomem *qmgr_regs;
static struct resource *mem_res;
static spinlock_t qmgr_lock;
static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
-static void (*irq_handlers[HALF_QUEUES])(void *pdev);
-static void *irq_pdevs[HALF_QUEUES];
+static void (*irq_handlers[QUEUES])(void *pdev);
+static void *irq_pdevs[QUEUES];
#if DEBUG_QMGR
char qmgr_queue_descs[QUEUES][32];
@@ -28,51 +28,112 @@ char qmgr_queue_descs[QUEUES][32];
void qmgr_set_irq(unsigned int queue, int src,
void (*handler)(void *pdev), void *pdev)
{
- u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
- int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
unsigned long flags;
- src &= 7;
spin_lock_irqsave(&qmgr_lock, flags);
- __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
+ if (queue < HALF_QUEUES) {
+ u32 __iomem *reg;
+ int bit;
+ BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL);
+ reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */
+ bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
+ __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit),
+ reg);
+ } else
+ /* IRQ source for queues 32-63 is fixed */
+ BUG_ON(src != QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY);
+
irq_handlers[queue] = handler;
irq_pdevs[queue] = pdev;
spin_unlock_irqrestore(&qmgr_lock, flags);
}
-static irqreturn_t qmgr_irq1(int irq, void *pdev)
+static irqreturn_t qmgr_irq1_a0(int irq, void *pdev)
{
- int i;
- u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
- __raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
-
- for (i = 0; i < HALF_QUEUES; i++)
- if (val & (1 << i))
+ int i, ret = 0;
+ u32 en_bitmap, src, stat;
+
+ /* ACK - it may clear any bits so don't rely on it */
+ __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]);
+
+ en_bitmap = qmgr_regs->irqen[0];
+ while (en_bitmap) {
+ i = __fls(en_bitmap); /* number of the last "low" queue */
+ en_bitmap &= ~BIT(i);
+ src = qmgr_regs->irqsrc[i >> 3];
+ stat = qmgr_regs->stat1[i >> 3];
+ if (src & 4) /* the IRQ condition is inverted */
+ stat = ~stat;
+ if (stat & BIT(src & 3)) {
irq_handlers[i](irq_pdevs[i]);
+ ret = IRQ_HANDLED;
+ }
+ }
+ return ret;
+}
+
+
+static irqreturn_t qmgr_irq2_a0(int irq, void *pdev)
+{
+ int i, ret = 0;
+ u32 req_bitmap;
+
+ /* ACK - it may clear any bits so don't rely on it */
+ __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]);
+
+ req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h;
+ while (req_bitmap) {
+ i = __fls(req_bitmap); /* number of the last "high" queue */
+ req_bitmap &= ~BIT(i);
+ irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]);
+ ret = IRQ_HANDLED;
+ }
+ return ret;
+}
- return val ? IRQ_HANDLED : 0;
+
+static irqreturn_t qmgr_irq(int irq, void *pdev)
+{
+ int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1);
+ u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]);
+
+ if (!req_bitmap)
+ return 0;
+ __raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */
+
+ while (req_bitmap) {
+ i = __fls(req_bitmap); /* number of the last queue */
+ req_bitmap &= ~BIT(i);
+ i += half * HALF_QUEUES;
+ irq_handlers[i](irq_pdevs[i]);
+ }
+ return IRQ_HANDLED;
}
void qmgr_enable_irq(unsigned int queue)
{
unsigned long flags;
+ int half = queue / 32;
+ u32 mask = 1 << (queue & (HALF_QUEUES - 1));
spin_lock_irqsave(&qmgr_lock, flags);
- __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
- &qmgr_regs->irqen[0]);
+ __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) | mask,
+ &qmgr_regs->irqen[half]);
spin_unlock_irqrestore(&qmgr_lock, flags);
}
void qmgr_disable_irq(unsigned int queue)
{
unsigned long flags;
+ int half = queue / 32;
+ u32 mask = 1 << (queue & (HALF_QUEUES - 1));
spin_lock_irqsave(&qmgr_lock, flags);
- __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
- &qmgr_regs->irqen[0]);
- __raw_writel(1 << queue, &qmgr_regs->irqstat[0]); /* clear */
+ __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) & ~mask,
+ &qmgr_regs->irqen[half]);
+ __raw_writel(mask, &qmgr_regs->irqstat[half]); /* clear */
spin_unlock_irqrestore(&qmgr_lock, flags);
}
@@ -98,8 +159,7 @@ int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
int err;
- if (queue >= HALF_QUEUES)
- return -ERANGE;
+ BUG_ON(queue >= QUEUES);
if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
return -EINVAL;
@@ -180,7 +240,7 @@ void qmgr_release_queue(unsigned int queue)
{
u32 cfg, addr, mask[4];
- BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
+ BUG_ON(queue >= QUEUES); /* not in valid range */
spin_lock_irq(&qmgr_lock);
cfg = __raw_readl(&qmgr_regs->sram[queue]);
@@ -224,6 +284,8 @@ void qmgr_release_queue(unsigned int queue)
static int qmgr_init(void)
{
int i, err;
+ irq_handler_t handler1, handler2;
+
mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
IXP4XX_QMGR_REGION_SIZE,
"IXP4xx Queue Manager");
@@ -247,23 +309,42 @@ static int qmgr_init(void)
__raw_writel(0, &qmgr_regs->irqen[i]);
}
+ __raw_writel(0xFFFFFFFF, &qmgr_regs->statne_h);
+ __raw_writel(0, &qmgr_regs->statf_h);
+
for (i = 0; i < QUEUES; i++)
__raw_writel(0, &qmgr_regs->sram[i]);
- err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
- "IXP4xx Queue Manager", NULL);
+ if (cpu_is_ixp42x_rev_a0()) {
+ handler1 = qmgr_irq1_a0;
+ handler2 = qmgr_irq2_a0;
+ } else
+ handler1 = handler2 = qmgr_irq;
+
+ err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager",
+ NULL);
if (err) {
- printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
- IRQ_IXP4XX_QM1);
+ printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
+ IRQ_IXP4XX_QM1, err);
goto error_irq;
}
+ err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager",
+ NULL);
+ if (err) {
+ printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
+ IRQ_IXP4XX_QM2, err);
+ goto error_irq2;
+ }
+
used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
spin_lock_init(&qmgr_lock);
printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
return 0;
+error_irq2:
+ free_irq(IRQ_IXP4XX_QM1, NULL);
error_irq:
iounmap(qmgr_regs);
error_map:
@@ -274,7 +355,9 @@ error_map:
static void qmgr_remove(void)
{
free_irq(IRQ_IXP4XX_QM1, NULL);
+ free_irq(IRQ_IXP4XX_QM2, NULL);
synchronize_irq(IRQ_IXP4XX_QM1);
+ synchronize_irq(IRQ_IXP4XX_QM2);
iounmap(qmgr_regs);
release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
}
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index b5421cc..25100f7 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -20,6 +20,12 @@ config MACH_RD88F6281
Say 'Y' here if you want your kernel to support the
Marvell RD-88F6281 Reference Board.
+config MACH_MV88F6281GTW_GE
+ bool "Marvell 88F6281 GTW GE Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell 88F6281 GTW GE Board.
+
config MACH_SHEEVAPLUG
bool "Marvell SheevaPlug Reference Board"
help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 8f03c9b..9dd680e 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -3,5 +3,8 @@ obj-y += common.o addr-map.o irq.o pcie.o mpp.o
obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o
obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
+obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_TS219) += ts219-setup.o
+
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index 5db4f0b..1da5d1c 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -20,6 +20,7 @@
*/
#define TARGET_DDR 0
#define TARGET_DEV_BUS 1
+#define TARGET_SRAM 3
#define TARGET_PCIE 4
#define ATTR_DEV_SPI_ROM 0x1e
#define ATTR_DEV_BOOT 0x1d
@@ -30,6 +31,7 @@
#define ATTR_DEV_CS0 0x3e
#define ATTR_PCIE_IO 0xe0
#define ATTR_PCIE_MEM 0xe8
+#define ATTR_SRAM 0x01
/*
* Helpers to get DDR bank info
@@ -48,7 +50,6 @@
struct mbus_dram_target_info kirkwood_mbus_dram_info;
-static int __initdata win_alloc_count;
static int __init cpu_win_can_remap(int win)
{
@@ -112,7 +113,11 @@ void __init kirkwood_setup_cpu_mbus(void)
setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
- win_alloc_count = 3;
+ /*
+ * Setup window for SRAM.
+ */
+ setup_cpu_win(3, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
+ TARGET_SRAM, ATTR_SRAM, -1);
/*
* Setup MBUS dram target info.
@@ -140,8 +145,3 @@ void __init kirkwood_setup_cpu_mbus(void)
}
kirkwood_mbus_dram_info.num_cs = cs;
}
-
-void __init kirkwood_setup_sram_win(u32 base, u32 size)
-{
- setup_cpu_win(win_alloc_count++, base, size, 0x03, 0x00, -1);
-}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index be1ca28..0f69198 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -16,6 +16,7 @@
#include <linux/mv643xx_eth.h>
#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
+#include <linux/mtd/nand.h>
#include <linux/spi/orion_spi.h>
#include <net/dsa.h>
#include <asm/page.h>
@@ -29,6 +30,7 @@
#include <plat/mvsdio.h>
#include <plat/mv_xor.h>
#include <plat/orion_nand.h>
+#include <plat/orion_wdt.h>
#include <plat/time.h>
#include "common.h"
@@ -54,6 +56,13 @@ void __init kirkwood_map_io(void)
iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
}
+/*
+ * Default clock control bits. Any bit _not_ set in this variable
+ * will be cleared from the hardware after platform devices have been
+ * registered. Some reserved bits must be set to 1.
+ */
+unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
+
/*****************************************************************************
* EHCI
@@ -95,6 +104,7 @@ static struct platform_device kirkwood_ehci = {
void __init kirkwood_ehci_init(void)
{
+ kirkwood_clk_ctrl |= CGC_USB0;
platform_device_register(&kirkwood_ehci);
}
@@ -151,6 +161,7 @@ static struct platform_device kirkwood_ge00 = {
void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
+ kirkwood_clk_ctrl |= CGC_GE0;
eth_data->shared = &kirkwood_ge00_shared;
kirkwood_ge00.dev.platform_data = eth_data;
@@ -212,6 +223,7 @@ static struct platform_device kirkwood_ge01 = {
void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
{
+ kirkwood_clk_ctrl |= CGC_GE1;
eth_data->shared = &kirkwood_ge01_shared;
kirkwood_ge01.dev.platform_data = eth_data;
@@ -258,6 +270,43 @@ void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
/*****************************************************************************
+ * NAND flash
+ ****************************************************************************/
+static struct resource kirkwood_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
+ .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
+ KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data kirkwood_nand_data = {
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+};
+
+static struct platform_device kirkwood_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &kirkwood_nand_data,
+ },
+ .resource = &kirkwood_nand_resource,
+ .num_resources = 1,
+};
+
+void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
+ int chip_delay)
+{
+ kirkwood_clk_ctrl |= CGC_RUNIT;
+ kirkwood_nand_data.parts = parts;
+ kirkwood_nand_data.nr_parts = nr_parts;
+ kirkwood_nand_data.chip_delay = chip_delay;
+ platform_device_register(&kirkwood_nand_flash);
+}
+
+
+/*****************************************************************************
* SoC RTC
****************************************************************************/
static struct resource kirkwood_rtc_resource = {
@@ -301,6 +350,9 @@ static struct platform_device kirkwood_sata = {
void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
{
+ kirkwood_clk_ctrl |= CGC_SATA0;
+ if (sata_data->n_ports > 1)
+ kirkwood_clk_ctrl |= CGC_SATA1;
sata_data->dram = &kirkwood_mbus_dram_info;
kirkwood_sata.dev.platform_data = sata_data;
platform_device_register(&kirkwood_sata);
@@ -346,6 +398,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
else
mvsdio_data->clock = 200000000;
mvsdio_data->dram = &kirkwood_mbus_dram_info;
+ kirkwood_clk_ctrl |= CGC_SDIO;
kirkwood_sdio.dev.platform_data = mvsdio_data;
platform_device_register(&kirkwood_sdio);
}
@@ -377,6 +430,7 @@ static struct platform_device kirkwood_spi = {
void __init kirkwood_spi_init()
{
+ kirkwood_clk_ctrl |= CGC_RUNIT;
platform_device_register(&kirkwood_spi);
}
@@ -507,6 +561,43 @@ void __init kirkwood_uart1_init(void)
/*****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+ ****************************************************************************/
+
+static struct resource kirkwood_crypto_res[] = {
+ {
+ .name = "regs",
+ .start = CRYPTO_PHYS_BASE,
+ .end = CRYPTO_PHYS_BASE + 0xffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "sram",
+ .start = KIRKWOOD_SRAM_PHYS_BASE,
+ .end = KIRKWOOD_SRAM_PHYS_BASE + KIRKWOOD_SRAM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "crypto interrupt",
+ .start = IRQ_KIRKWOOD_CRYPTO,
+ .end = IRQ_KIRKWOOD_CRYPTO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device kirkwood_crypto_device = {
+ .name = "mv_crypto",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(kirkwood_crypto_res),
+ .resource = kirkwood_crypto_res,
+};
+
+void __init kirkwood_crypto_init(void)
+{
+ kirkwood_clk_ctrl |= CGC_CRYPTO;
+ platform_device_register(&kirkwood_crypto_device);
+}
+
+
+/*****************************************************************************
* XOR
****************************************************************************/
static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = {
@@ -597,6 +688,7 @@ static struct platform_device kirkwood_xor01_channel = {
static void __init kirkwood_xor0_init(void)
{
+ kirkwood_clk_ctrl |= CGC_XOR0;
platform_device_register(&kirkwood_xor0_shared);
/*
@@ -695,6 +787,7 @@ static struct platform_device kirkwood_xor11_channel = {
static void __init kirkwood_xor1_init(void)
{
+ kirkwood_clk_ctrl |= CGC_XOR1;
platform_device_register(&kirkwood_xor1_shared);
/*
@@ -713,6 +806,29 @@ static void __init kirkwood_xor1_init(void)
/*****************************************************************************
+ * Watchdog
+ ****************************************************************************/
+static struct orion_wdt_platform_data kirkwood_wdt_data = {
+ .tclk = 0,
+};
+
+static struct platform_device kirkwood_wdt_device = {
+ .name = "orion_wdt",
+ .id = -1,
+ .dev = {
+ .platform_data = &kirkwood_wdt_data,
+ },
+ .num_resources = 0,
+};
+
+static void __init kirkwood_wdt_init(void)
+{
+ kirkwood_wdt_data.tclk = kirkwood_tclk;
+ platform_device_register(&kirkwood_wdt_device);
+}
+
+
+/*****************************************************************************
* Time handling
****************************************************************************/
int kirkwood_tclk;
@@ -804,6 +920,49 @@ void __init kirkwood_init(void)
/* internal devices that every board has */
kirkwood_rtc_init();
+ kirkwood_wdt_init();
kirkwood_xor0_init();
kirkwood_xor1_init();
+ kirkwood_crypto_init();
+}
+
+static int __init kirkwood_clock_gate(void)
+{
+ unsigned int curr = readl(CLOCK_GATING_CTRL);
+
+ printk(KERN_DEBUG "Gating clock of unused units\n");
+ printk(KERN_DEBUG "before: 0x%08x\n", curr);
+
+ /* Make sure those units are accessible */
+ writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL);
+
+ /* For SATA: first shutdown the phy */
+ if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
+ /* Disable PLL and IVREF */
+ writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
+ /* Disable PHY */
+ writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
+ }
+ if (!(kirkwood_clk_ctrl & CGC_SATA1)) {
+ /* Disable PLL and IVREF */
+ writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
+ /* Disable PHY */
+ writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
+ }
+
+ /* For PCIe: first shutdown the phy */
+ if (!(kirkwood_clk_ctrl & CGC_PEX0)) {
+ writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
+ while (1)
+ if (readl(PCIE_STATUS) & 0x1)
+ break;
+ writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
+ }
+
+ /* Now gate clock the required units */
+ writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
+ printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
+
+ return 0;
}
+late_initcall(kirkwood_clock_gate);
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 6ee8840..d7de434 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -15,6 +15,7 @@ struct dsa_platform_data;
struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
struct mvsdio_platform_data;
+struct mtd_partition;
/*
* Basic Kirkwood init functions used early by machine-setup.
@@ -25,7 +26,6 @@ void kirkwood_init_irq(void);
extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
void kirkwood_setup_cpu_mbus(void);
-void kirkwood_setup_sram_win(u32 base, u32 size);
void kirkwood_pcie_id(u32 *dev, u32 *rev);
@@ -40,9 +40,11 @@ void kirkwood_spi_init(void);
void kirkwood_i2c_init(void);
void kirkwood_uart0_init(void);
void kirkwood_uart1_init(void);
+void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
extern int kirkwood_tclk;
extern struct sys_timer kirkwood_timer;
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
#endif
diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c
new file mode 100644
index 0000000..f68d33f
--- /dev/null
+++ b/arch/arm/mach-kirkwood/cpuidle.c
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-kirkwood/cpuidle.c
+ *
+ * CPU idle Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The cpu idle uses wait-for-interrupt and DDR self refresh in order
+ * to implement two idle states -
+ * #1 wait-for-interrupt
+ * #2 wait-for-interrupt and DDR self refresh
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+#include <asm/proc-fns.h>
+#include <mach/kirkwood.h>
+
+#define KIRKWOOD_MAX_STATES 2
+
+static struct cpuidle_driver kirkwood_idle_driver = {
+ .name = "kirkwood_idle",
+ .owner = THIS_MODULE,
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
+
+/* Actual code that puts the SoC in different idle states */
+static int kirkwood_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_state *state)
+{
+ struct timeval before, after;
+ int idle_time;
+
+ local_irq_disable();
+ do_gettimeofday(&before);
+ if (state == &dev->states[0])
+ /* Wait for interrupt state */
+ cpu_do_idle();
+ else if (state == &dev->states[1]) {
+ /*
+ * Following write will put DDR in self refresh.
+ * Note that we have 256 cycles before DDR puts it
+ * self in self-refresh, so the wait-for-interrupt
+ * call afterwards won't get the DDR from self refresh
+ * mode.
+ */
+ writel(0x7, DDR_OPERATION_BASE);
+ cpu_do_idle();
+ }
+ do_gettimeofday(&after);
+ local_irq_enable();
+ idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+ (after.tv_usec - before.tv_usec);
+ return idle_time;
+}
+
+/* Initialize CPU idle by registering the idle states */
+static int kirkwood_init_cpuidle(void)
+{
+ struct cpuidle_device *device;
+
+ cpuidle_register_driver(&kirkwood_idle_driver);
+
+ device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
+ device->state_count = KIRKWOOD_MAX_STATES;
+
+ /* Wait for interrupt state */
+ device->states[0].enter = kirkwood_enter_idle;
+ device->states[0].exit_latency = 1;
+ device->states[0].target_residency = 10000;
+ device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+ strcpy(device->states[0].name, "WFI");
+ strcpy(device->states[0].desc, "Wait for interrupt");
+
+ /* Wait for interrupt and DDR self refresh state */
+ device->states[1].enter = kirkwood_enter_idle;
+ device->states[1].exit_latency = 10;
+ device->states[1].target_residency = 10000;
+ device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+ strcpy(device->states[1].name, "DDR SR");
+ strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
+
+ if (cpuidle_register_device(device)) {
+ printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+device_initcall(kirkwood_init_cpuidle);
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index 5505d58..39bdf4b 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -11,14 +11,12 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/orion_nand.h>
#include <plat/mvsdio.h>
#include "common.h"
#include "mpp.h"
@@ -39,32 +37,6 @@ static struct mtd_partition db88f6281_nand_parts[] = {
},
};
-static struct resource db88f6281_nand_resource = {
- .flags = IORESOURCE_MEM,
- .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
- .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
- KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data db88f6281_nand_data = {
- .parts = db88f6281_nand_parts,
- .nr_parts = ARRAY_SIZE(db88f6281_nand_parts),
- .cle = 0,
- .ale = 1,
- .width = 8,
- .chip_delay = 25,
-};
-
-static struct platform_device db88f6281_nand_flash = {
- .name = "orion_nand",
- .id = -1,
- .dev = {
- .platform_data = &db88f6281_nand_data,
- },
- .resource = &db88f6281_nand_resource,
- .num_resources = 1,
-};
-
static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
@@ -92,13 +64,12 @@ static void __init db88f6281_init(void)
kirkwood_init();
kirkwood_mpp_conf(db88f6281_mpp_config);
+ kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25);
kirkwood_ehci_init();
kirkwood_ge00_init(&db88f6281_ge00_data);
kirkwood_sata_init(&db88f6281_sata_data);
kirkwood_uart0_init();
kirkwood_sdio_init(&db88f6281_mvsdio_data);
-
- platform_device_register(&db88f6281_nand_flash);
}
static int __init db88f6281_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 4f7029f..9e80d92 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -17,12 +17,15 @@
#define CPU_RESET 0x00000002
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define WDT_RESET_OUT_EN 0x00000002
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define WDT_INT_REQ 0x0008
+
#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
@@ -39,4 +42,22 @@
#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
#define L2_WRITETHROUGH 0x00000010
+#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE | 0x11c)
+#define CGC_GE0 (1 << 0)
+#define CGC_PEX0 (1 << 2)
+#define CGC_USB0 (1 << 3)
+#define CGC_SDIO (1 << 4)
+#define CGC_TSU (1 << 5)
+#define CGC_DUNIT (1 << 6)
+#define CGC_RUNIT (1 << 7)
+#define CGC_XOR0 (1 << 8)
+#define CGC_AUDIO (1 << 9)
+#define CGC_SATA0 (1 << 14)
+#define CGC_SATA1 (1 << 15)
+#define CGC_XOR1 (1 << 16)
+#define CGC_CRYPTO (1 << 17)
+#define CGC_GE1 (1 << 19)
+#define CGC_TDM (1 << 20)
+#define CGC_RESERVED ((1 << 18) | (0x6 << 21))
+
#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
index be07be0..a643a84 100644
--- a/arch/arm/mach-kirkwood/include/mach/io.h
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -19,6 +19,31 @@ static inline void __iomem *__io(unsigned long addr)
+ KIRKWOOD_PCIE_IO_VIRT_BASE);
}
+static inline void __iomem *
+__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
+{
+ void __iomem *retval;
+ unsigned long offs = paddr - KIRKWOOD_REGS_PHYS_BASE;
+ if (mtype == MT_DEVICE && size && offs < KIRKWOOD_REGS_SIZE &&
+ size <= KIRKWOOD_REGS_SIZE && offs + size <= KIRKWOOD_REGS_SIZE) {
+ retval = (void __iomem *)KIRKWOOD_REGS_VIRT_BASE + offs;
+ } else {
+ retval = __arm_ioremap(paddr, size, mtype);
+ }
+
+ return retval;
+}
+
+static inline void
+__arch_iounmap(void __iomem *addr)
+{
+ if (addr < (void __iomem *)KIRKWOOD_REGS_VIRT_BASE ||
+ addr >= (void __iomem *)(KIRKWOOD_REGS_VIRT_BASE + KIRKWOOD_REGS_SIZE))
+ __iounmap(addr);
+}
+
+#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m)
+#define __arch_iounmap(a) __arch_iounmap(a)
#define __io(a) __io(a)
#define __mem_pci(a) (a)
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index b3e1395..07af858 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -20,16 +20,18 @@
* f1000000 on-chip peripheral registers
* f2000000 PCIe I/O space
* f3000000 NAND controller address window
+ * f4000000 Security Accelerator SRAM
*
* virt phys size
* fee00000 f1000000 1M on-chip peripheral registers
* fef00000 f2000000 1M PCIe I/O space
*/
+#define KIRKWOOD_SRAM_PHYS_BASE 0xf4000000
+#define KIRKWOOD_SRAM_SIZE SZ_2K
+
#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000
-#define KIRKWOOD_NAND_MEM_SIZE SZ_64K /* 1K is sufficient, but 64K
- * is the minimal window size
- */
+#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000
@@ -48,6 +50,7 @@
*/
#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500)
+#define DDR_OPERATION_BASE (DDR_VIRT_BASE | 0x1418)
#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
@@ -63,7 +66,11 @@
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000)
+
#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+#define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70)
+#define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04)
#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
@@ -80,6 +87,11 @@
#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x80000)
+#define SATA0_IF_CTRL (SATA_VIRT_BASE | 0x2050)
+#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE | 0x2330)
+#define SATA1_IF_CTRL (SATA_VIRT_BASE | 0x4050)
+#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE | 0x4330)
#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000)
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index 63c4493..a5900f6 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -48,6 +48,9 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
if (!variant_mask)
return;
+ /* Initialize gpiolib. */
+ orion_gpio_init();
+
printk(KERN_DEBUG "initial MPP regs:");
for (i = 0; i < MPP_NR_REGS; i++) {
mpp_ctrl[i] = readl(MPP_CTRL(i));
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
new file mode 100644
index 0000000..0358f45
--- /dev/null
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+ *
+ * Marvell 88F6281 GTW GE Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/timer.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <net/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_NONE,
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+};
+
+static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
+ .port_names[0] = "lan1",
+ .port_names[1] = "lan2",
+ .port_names[2] = "lan3",
+ .port_names[3] = "lan4",
+ .port_names[4] = "wan",
+ .port_names[5] = "cpu",
+};
+
+static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &mv88f6281gtw_ge_switch_chip_data,
+};
+
+static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
+ .type = "mx25l12805d",
+};
+
+static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &mv88f6281gtw_ge_spi_slave_data,
+ .irq = -1,
+ .max_speed_hz = 50000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
+ {
+ .code = KEY_RESTART,
+ .gpio = 47,
+ .desc = "SWR Button",
+ .active_low = 1,
+ }, {
+ .code = KEY_F1,
+ .gpio = 46,
+ .desc = "WPS Button(F1)",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
+ .buttons = mv88f6281gtw_ge_button_pins,
+ .nbuttons = ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &mv88f6281gtw_ge_button_data,
+ },
+};
+
+static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
+ {
+ .name = "gtw:green:Status",
+ .gpio = 20,
+ .active_low = 0,
+ }, {
+ .name = "gtw:red:Status",
+ .gpio = 21,
+ .active_low = 0,
+ }, {
+ .name = "gtw:green:USB",
+ .gpio = 12,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
+ .leds = mv88f6281gtw_ge_led_pins,
+ .num_leds = ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mv88f6281gtw_ge_led_data,
+ },
+};
+
+static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
+ MPP12_GPO, /* Status#_USB pin */
+ MPP20_GPIO, /* Status#_GLED pin */
+ MPP21_GPIO, /* Status#_RLED pin */
+ MPP46_GPIO, /* WPS_Switch pin */
+ MPP47_GPIO, /* SW_Init pin */
+ 0
+};
+
+static void __init mv88f6281gtw_ge_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
+ kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
+ spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
+ ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
+ kirkwood_spi_init();
+ kirkwood_uart0_init();
+ platform_device_register(&mv88f6281gtw_ge_leds);
+ platform_device_register(&mv88f6281gtw_ge_buttons);
+}
+
+static int __init mv88f6281gtw_ge_pci_init(void)
+{
+ if (machine_is_mv88f6281gtw_ge())
+ kirkwood_pcie_init();
+
+ return 0;
+}
+subsys_initcall(mv88f6281gtw_ge_pci_init);
+
+MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = mv88f6281gtw_ge_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 73fccac..d90b9aa 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -14,6 +14,7 @@
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
+#include <mach/bridge-regs.h>
#include "common.h"
@@ -95,6 +96,7 @@ static struct pci_ops pcie_ops = {
static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
{
struct resource *res;
+ extern unsigned int kirkwood_clk_ctrl;
/*
* Generic PCIe unit setup.
@@ -133,6 +135,8 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
sys->resource[2] = NULL;
sys->io_offset = 0;
+ kirkwood_clk_ctrl |= CGC_PEX0;
+
return 1;
}
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 2f0e4ef..8bf4153 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -11,8 +11,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/spi/flash.h>
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 31e996d..31708dd 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -12,7 +12,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
-#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
@@ -22,7 +21,6 @@
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
#include "common.h"
#include "mpp.h"
@@ -42,32 +40,6 @@ static struct mtd_partition rd88f6281_nand_parts[] = {
},
};
-static struct resource rd88f6281_nand_resource = {
- .flags = IORESOURCE_MEM,
- .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
- .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
- KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data rd88f6281_nand_data = {
- .parts = rd88f6281_nand_parts,
- .nr_parts = ARRAY_SIZE(rd88f6281_nand_parts),
- .cle = 0,
- .ale = 1,
- .width = 8,
- .chip_delay = 25,
-};
-
-static struct platform_device rd88f6281_nand_flash = {
- .name = "orion_nand",
- .id = -1,
- .dev = {
- .platform_data = &rd88f6281_nand_data,
- },
- .resource = &rd88f6281_nand_resource,
- .num_resources = 1,
-};
-
static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
.speed = SPEED_1000,
@@ -114,6 +86,7 @@ static void __init rd88f6281_init(void)
kirkwood_init();
kirkwood_mpp_conf(rd88f6281_mpp_config);
+ kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25);
kirkwood_ehci_init();
kirkwood_ge00_init(&rd88f6281_ge00_data);
@@ -129,8 +102,6 @@ static void __init rd88f6281_init(void)
kirkwood_sata_init(&rd88f6281_sata_data);
kirkwood_sdio_init(&rd88f6281_mvsdio_data);
kirkwood_uart0_init();
-
- platform_device_register(&rd88f6281_nand_flash);
}
static int __init rd88f6281_pci_init(void)
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 831e4a5..c7319ee 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -11,7 +11,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
@@ -20,7 +19,6 @@
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
#include "common.h"
#include "mpp.h"
@@ -40,38 +38,12 @@ static struct mtd_partition sheevaplug_nand_parts[] = {
},
};
-static struct resource sheevaplug_nand_resource = {
- .flags = IORESOURCE_MEM,
- .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
- .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
- KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data sheevaplug_nand_data = {
- .parts = sheevaplug_nand_parts,
- .nr_parts = ARRAY_SIZE(sheevaplug_nand_parts),
- .cle = 0,
- .ale = 1,
- .width = 8,
- .chip_delay = 25,
-};
-
-static struct platform_device sheevaplug_nand_flash = {
- .name = "orion_nand",
- .id = -1,
- .dev = {
- .platform_data = &sheevaplug_nand_data,
- },
- .resource = &sheevaplug_nand_resource,
- .num_resources = 1,
-};
-
static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
- // unfortunately the CD signal has not been connected */
+ /* unfortunately the CD signal has not been connected */
};
static struct gpio_led sheevaplug_led_pins[] = {
@@ -111,6 +83,7 @@ static void __init sheevaplug_init(void)
kirkwood_mpp_conf(sheevaplug_mpp_config);
kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
@@ -120,7 +93,6 @@ static void __init sheevaplug_init(void)
kirkwood_ge00_init(&sheevaplug_ge00_data);
kirkwood_sdio_init(&sheevaplug_mvsdio_data);
- platform_device_register(&sheevaplug_nand_flash);
platform_device_register(&sheevaplug_leds);
}
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index e83e45e..16295cf 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -52,6 +52,7 @@
/*
* Interrupt numbers for PXA910
*/
+#define IRQ_PXA910_NONE (-1)
#define IRQ_PXA910_AIRQ 0
#define IRQ_PXA910_SSP3 1
#define IRQ_PXA910_SSP2 2
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 2e91464..3b216bf 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -253,6 +253,10 @@
#define GPIO58_LCD_PCLK_WR MFP_CFG(GPIO58, AF1)
#define GPIO85_LCD_VSYNC MFP_CFG(GPIO85, AF1)
+/* I2C */
+#define GPIO105_CI2C_SDA MFP_CFG(GPIO105, AF1)
+#define GPIO106_CI2C_SCL MFP_CFG(GPIO106, AF1)
+
/* I2S */
#define GPIO113_I2S_MCLK MFP_CFG(GPIO113,AF6)
#define GPIO114_I2S_FRM MFP_CFG(GPIO114,AF1)
@@ -260,4 +264,27 @@
#define GPIO116_I2S_RXD MFP_CFG(GPIO116,AF2)
#define GPIO117_I2S_TXD MFP_CFG(GPIO117,AF2)
+/* PWM */
+#define GPIO96_PWM3_OUT MFP_CFG(GPIO96, AF1)
+#define GPIO97_PWM2_OUT MFP_CFG(GPIO97, AF1)
+#define GPIO98_PWM1_OUT MFP_CFG(GPIO98, AF1)
+#define GPIO104_PWM4_OUT MFP_CFG(GPIO104, AF1)
+#define GPIO106_PWM2_OUT MFP_CFG(GPIO106, AF2)
+#define GPIO74_PWM4_OUT MFP_CFG(GPIO74, AF2)
+#define GPIO75_PWM3_OUT MFP_CFG(GPIO75, AF2)
+#define GPIO76_PWM2_OUT MFP_CFG(GPIO76, AF2)
+#define GPIO77_PWM1_OUT MFP_CFG(GPIO77, AF2)
+#define GPIO82_PWM4_OUT MFP_CFG(GPIO82, AF2)
+#define GPIO83_PWM3_OUT MFP_CFG(GPIO83, AF2)
+#define GPIO84_PWM2_OUT MFP_CFG(GPIO84, AF2)
+#define GPIO85_PWM1_OUT MFP_CFG(GPIO85, AF2)
+#define GPIO84_PWM1_OUT MFP_CFG(GPIO84, AF4)
+#define GPIO122_PWM3_OUT MFP_CFG(GPIO122, AF3)
+#define GPIO123_PWM1_OUT MFP_CFG(GPIO123, AF1)
+#define GPIO124_PWM2_OUT MFP_CFG(GPIO124, AF1)
+#define GPIO125_PWM3_OUT MFP_CFG(GPIO125, AF1)
+#define GPIO126_PWM4_OUT MFP_CFG(GPIO126, AF1)
+#define GPIO86_PWM1_OUT MFP_CFG(GPIO86, AF2)
+#define GPIO86_PWM2_OUT MFP_CFG(GPIO86, AF3)
+
#endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
index d97de36..bf1189ff 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
@@ -159,4 +159,12 @@
#define MMC1_CD_MMC1_CD MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
#define MMC1_WP_MMC1_WP MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
+/* PWM */
+#define GPIO27 PWM3 AF2 MFP_CFG(GPIO27, AF2)
+#define GPIO51_PWM2_OUT MFP_CFG(GPIO51, AF2)
+#define GPIO117_PWM1_OUT MFP_CFG(GPIO117, AF2)
+#define GPIO118_PWM2_OUT MFP_CFG(GPIO118, AF2)
+#define GPIO119_PWM3_OUT MFP_CFG(GPIO119, AF2)
+#define GPIO120_PWM4_OUT MFP_CFG(GPIO120, AF2)
+
#endif /* __ASM_MACH MFP_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index ef0a8a2..6bf1f0e 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -1,10 +1,18 @@
#ifndef __ASM_MACH_PXA168_H
#define __ASM_MACH_PXA168_H
+#include <linux/i2c.h>
#include <mach/devices.h>
+#include <plat/i2c.h>
extern struct pxa_device_desc pxa168_device_uart1;
extern struct pxa_device_desc pxa168_device_uart2;
+extern struct pxa_device_desc pxa168_device_twsi0;
+extern struct pxa_device_desc pxa168_device_twsi1;
+extern struct pxa_device_desc pxa168_device_pwm1;
+extern struct pxa_device_desc pxa168_device_pwm2;
+extern struct pxa_device_desc pxa168_device_pwm3;
+extern struct pxa_device_desc pxa168_device_pwm4;
static inline int pxa168_add_uart(int id)
{
@@ -20,4 +28,40 @@ static inline int pxa168_add_uart(int id)
return pxa_register_device(d, NULL, 0);
}
+
+static inline int pxa168_add_twsi(int id, struct i2c_pxa_platform_data *data,
+ struct i2c_board_info *info, unsigned size)
+{
+ struct pxa_device_desc *d = NULL;
+ int ret;
+
+ switch (id) {
+ case 0: d = &pxa168_device_twsi0; break;
+ case 1: d = &pxa168_device_twsi1; break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = i2c_register_board_info(id, info, size);
+ if (ret)
+ return ret;
+
+ return pxa_register_device(d, data, sizeof(*data));
+}
+
+static inline int pxa168_add_pwm(int id)
+{
+ struct pxa_device_desc *d = NULL;
+
+ switch (id) {
+ case 1: d = &pxa168_device_pwm1; break;
+ case 2: d = &pxa168_device_pwm2; break;
+ case 3: d = &pxa168_device_pwm3; break;
+ case 4: d = &pxa168_device_pwm4; break;
+ default:
+ return -EINVAL;
+ }
+
+ return pxa_register_device(d, NULL, 0);
+}
#endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index b7aeaf5..6ae1ed7 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -1,10 +1,18 @@
#ifndef __ASM_MACH_PXA910_H
#define __ASM_MACH_PXA910_H
+#include <linux/i2c.h>
#include <mach/devices.h>
+#include <plat/i2c.h>
extern struct pxa_device_desc pxa910_device_uart1;
extern struct pxa_device_desc pxa910_device_uart2;
+extern struct pxa_device_desc pxa910_device_twsi0;
+extern struct pxa_device_desc pxa910_device_twsi1;
+extern struct pxa_device_desc pxa910_device_pwm1;
+extern struct pxa_device_desc pxa910_device_pwm2;
+extern struct pxa_device_desc pxa910_device_pwm3;
+extern struct pxa_device_desc pxa910_device_pwm4;
static inline int pxa910_add_uart(int id)
{
@@ -20,4 +28,40 @@ static inline int pxa910_add_uart(int id)
return pxa_register_device(d, NULL, 0);
}
+
+static inline int pxa910_add_twsi(int id, struct i2c_pxa_platform_data *data,
+ struct i2c_board_info *info, unsigned size)
+{
+ struct pxa_device_desc *d = NULL;
+ int ret;
+
+ switch (id) {
+ case 0: d = &pxa910_device_twsi0; break;
+ case 1: d = &pxa910_device_twsi1; break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = i2c_register_board_info(id, info, size);
+ if (ret)
+ return ret;
+
+ return pxa_register_device(d, data, sizeof(*data));
+}
+
+static inline int pxa910_add_pwm(int id)
+{
+ struct pxa_device_desc *d = NULL;
+
+ switch (id) {
+ case 1: d = &pxa910_device_pwm1; break;
+ case 2: d = &pxa910_device_pwm2; break;
+ case 3: d = &pxa910_device_pwm3; break;
+ case 4: d = &pxa910_device_pwm4; break;
+ default:
+ return -EINVAL;
+ }
+
+ return pxa_register_device(d, NULL, 0);
+}
#endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index c6b8c9d..98ccbee 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -22,8 +22,10 @@
#define APBC_PXA168_UART1 APBC_REG(0x000)
#define APBC_PXA168_UART2 APBC_REG(0x004)
#define APBC_PXA168_GPIO APBC_REG(0x008)
-#define APBC_PXA168_PWM0 APBC_REG(0x00c)
-#define APBC_PXA168_PWM1 APBC_REG(0x010)
+#define APBC_PXA168_PWM1 APBC_REG(0x00c)
+#define APBC_PXA168_PWM2 APBC_REG(0x010)
+#define APBC_PXA168_PWM3 APBC_REG(0x014)
+#define APBC_PXA168_PWM4 APBC_REG(0x018)
#define APBC_PXA168_SSP1 APBC_REG(0x01c)
#define APBC_PXA168_SSP2 APBC_REG(0x020)
#define APBC_PXA168_RTC APBC_REG(0x028)
@@ -48,10 +50,10 @@
#define APBC_PXA910_UART0 APBC_REG(0x000)
#define APBC_PXA910_UART1 APBC_REG(0x004)
#define APBC_PXA910_GPIO APBC_REG(0x008)
-#define APBC_PXA910_PWM0 APBC_REG(0x00c)
-#define APBC_PXA910_PWM1 APBC_REG(0x010)
-#define APBC_PXA910_PWM2 APBC_REG(0x014)
-#define APBC_PXA910_PWM3 APBC_REG(0x018)
+#define APBC_PXA910_PWM1 APBC_REG(0x00c)
+#define APBC_PXA910_PWM2 APBC_REG(0x010)
+#define APBC_PXA910_PWM3 APBC_REG(0x014)
+#define APBC_PXA910_PWM4 APBC_REG(0x018)
#define APBC_PXA910_SSP1 APBC_REG(0x01c)
#define APBC_PXA910_SSP2 APBC_REG(0x020)
#define APBC_PXA910_IPC APBC_REG(0x024)
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index ae92446..71b1ae3 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -65,11 +65,23 @@ void __init pxa168_init_irq(void)
/* APB peripheral clocks */
static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
+static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
/* device and clock bindings */
static struct clk_lookup pxa168_clkregs[] = {
INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+ INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+ INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
+ INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
+ INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
+ INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
};
static int __init pxa168_init(void)
@@ -109,3 +121,9 @@ struct sys_timer pxa168_timer = {
/* on-chip devices */
PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
+PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
+PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
+PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
+PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
+PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
+PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 453f8f7..5882ca6 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -103,11 +103,23 @@ void __init pxa910_init_irq(void)
/* APB peripheral clocks */
static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
+static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
+static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
+static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000);
+static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
+static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
+static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
/* device and clock bindings */
static struct clk_lookup pxa910_clkregs[] = {
INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
+ INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
+ INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
+ INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
+ INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
+ INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
};
static int __init pxa910_init(void)
@@ -156,3 +168,9 @@ struct sys_timer pxa910_timer = {
*/
PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
+PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
+PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
+PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
+PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
+PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
+PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index f289b0e..22b4ff8 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -28,6 +28,9 @@ void __init mv78xx0_init_irq(void)
{
int i;
+ /* Initialize gpiolib. */
+ orion_gpio_init();
+
orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index 0dec6f3..7622c9b 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -26,6 +26,7 @@
#include <asm/mach/map.h>
+#include <mach/common.h>
#include <mach/hardware.h>
static struct map_desc imx_io_desc[] __initdata = {
@@ -37,7 +38,9 @@ static struct map_desc imx_io_desc[] __initdata = {
}
};
-void __init mxc_map_io(void)
+void __init mx1_map_io(void)
{
+ mxc_set_cpu_type(MXC_CPU_MX1);
+
iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
}
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index e54057f..e5b0c0a 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -12,77 +12,56 @@
* warranty of any kind, whether express or implied.
*/
-#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/irqs.h>
+#include <mach/hardware.h>
#include <mach/i2c.h>
+#include <mach/imx-uart.h>
#include <mach/iomux.h>
+#include <mach/irqs.h>
+
#include "devices.h"
-/*
- * UARTs platform data
- */
-static int mxc_uart1_pins[] = {
+static int mx1ads_pins[] = {
+ /* UART1 */
PC9_PF_UART1_CTS,
PC10_PF_UART1_RTS,
PC11_PF_UART1_TXD,
PC12_PF_UART1_RXD,
-};
-
-static int uart1_mxc_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart1_mxc_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins));
- return 0;
-}
-
-static int mxc_uart2_pins[] = {
+ /* UART2 */
PB28_PF_UART2_CTS,
PB29_PF_UART2_RTS,
PB30_PF_UART2_TXD,
PB31_PF_UART2_RXD,
+ /* I2C */
+ PA15_PF_I2C_SDA,
+ PA16_PF_I2C_SCL,
+ /* SPI */
+ PC13_PF_SPI1_SPI_RDY,
+ PC14_PF_SPI1_SCLK,
+ PC15_PF_SPI1_SS,
+ PC16_PF_SPI1_MISO,
+ PC17_PF_SPI1_MOSI,
};
-static int uart2_mxc_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart2_mxc_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins));
- return 0;
-}
+/*
+ * UARTs platform data
+ */
static struct imxuart_platform_data uart_pdata[] = {
{
- .init = uart1_mxc_init,
- .exit = uart1_mxc_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart2_mxc_init,
- .exit = uart2_mxc_exit,
.flags = IMXUART_HAVE_RTSCTS,
},
};
@@ -111,24 +90,6 @@ static struct platform_device flash_device = {
/*
* I2C
*/
-
-static int i2c_pins[] = {
- PA15_PF_I2C_SDA,
- PA16_PF_I2C_SCL,
-};
-
-static int i2c_init(struct device *dev)
-{
- return mxc_gpio_setup_multiple_pins(i2c_pins,
- ARRAY_SIZE(i2c_pins), "I2C");
-}
-
-static void i2c_exit(struct device *dev)
-{
- mxc_gpio_release_multiple_pins(i2c_pins,
- ARRAY_SIZE(i2c_pins));
-}
-
static struct pcf857x_platform_data pcf857x_data[] = {
{
.gpio_base = 4 * 32,
@@ -139,8 +100,6 @@ static struct pcf857x_platform_data pcf857x_data[] = {
static struct imxi2c_platform_data mx1ads_i2c_data = {
.bitrate = 100000,
- .init = i2c_init,
- .exit = i2c_exit,
};
static struct i2c_board_info mx1ads_i2c_devices[] = {
@@ -160,6 +119,9 @@ static struct i2c_board_info mx1ads_i2c_devices[] = {
*/
static void __init mx1ads_init(void)
{
+ mxc_gpio_setup_multiple_pins(mx1ads_pins,
+ ARRAY_SIZE(mx1ads_pins), "mx1ads");
+
/* UART */
mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
@@ -188,7 +150,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
.phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx1_map_io,
.init_irq = mxc_init_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
@@ -198,7 +160,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
.phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx1_map_io,
.init_irq = mxc_init_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 0e71f3f..20e0b5b 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -153,7 +153,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
.phys_io = 0x00200000,
.io_pg_offst = ((0xe0200000) >> 18) & 0xfffc,
.boot_params = 0x08000100,
- .map_io = mxc_map_io,
+ .map_io = mx1_map_io,
.init_irq = mxc_init_irq,
.timer = &scb9328_timer,
.init_machine = scb9328_init,
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 42a7888..c77da58 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -18,6 +18,13 @@ endchoice
comment "MX2 platforms:"
+config MACH_MX21ADS
+ bool "MX21ADS platform"
+ depends on MACH_MX21
+ help
+ Include support for MX21ADS platform. This includes specific
+ configurations for the board and its peripherals.
+
config MACH_MX27ADS
bool "MX27ADS platform"
depends on MACH_MX27
@@ -46,4 +53,18 @@ config MACH_PCM970_BASEBOARD
endchoice
+config MACH_MX27_3DS
+ bool "MX27PDK platform"
+ depends on MACH_MX27
+ help
+ Include support for MX27PDK platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX27LITE
+ bool "LogicPD MX27 LITEKIT platform"
+ depends on MACH_MX27
+ help
+ Include support for MX27 LITEKIT platform. This includes specific
+ configurations for the board and its peripherals.
+
endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 950649a..b9b1cca 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -11,6 +11,10 @@ obj-$(CONFIG_MACH_MX21) += clock_imx21.o
obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
obj-$(CONFIG_MACH_MX27) += clock_imx27.o
+obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
obj-$(CONFIG_MACH_PCM038) += pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
+obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
+obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
+
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index e4b08ca..0850fb8 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -48,6 +48,25 @@ static void _clk_disable(struct clk *clk)
__raw_writel(reg, clk->enable_reg);
}
+static unsigned long _clk_generic_round_rate(struct clk *clk,
+ unsigned long rate,
+ u32 max_divisor)
+{
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+ if (parent_rate % rate)
+ div++;
+
+ if (div > max_divisor)
+ div = max_divisor;
+
+ return parent_rate / div;
+}
+
static int _clk_spll_enable(struct clk *clk)
{
u32 reg;
@@ -78,19 +97,7 @@ static void _clk_spll_disable(struct clk *clk)
static unsigned long _clk_perclkx_round_rate(struct clk *clk,
unsigned long rate)
{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (parent_rate % rate)
- div++;
-
- if (div > 64)
- div = 64;
-
- return parent_rate / div;
+ return _clk_generic_round_rate(clk, rate, 64);
}
static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
@@ -130,6 +137,32 @@ static unsigned long _clk_usb_recalc(struct clk *clk)
return parent_rate / (usb_pdf + 1U);
}
+static unsigned long _clk_usb_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ return _clk_generic_round_rate(clk, rate, 8);
+}
+
+static int _clk_usb_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg;
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+ if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+ return -EINVAL;
+ div--;
+
+ reg = CSCR() & ~CCM_CSCR_USB_MASK;
+ reg |= div << CCM_CSCR_USB_OFFSET;
+ __raw_writel(reg, CCM_CSCR);
+
+ return 0;
+}
+
static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
{
unsigned long parent_rate;
@@ -595,11 +628,14 @@ static struct clk csi_clk[] = {
static struct clk usb_clk[] = {
{
.parent = &spll_clk,
+ .secondary = &usb_clk[1],
.get_rate = _clk_usb_recalc,
.enable = _clk_enable,
.enable_reg = CCM_PCCR_USBOTG_REG,
.enable_shift = CCM_PCCR_USBOTG_OFFSET,
.disable = _clk_disable,
+ .round_rate = _clk_usb_round_rate,
+ .set_rate = _clk_usb_set_rate,
}, {
.parent = &hclk_clk,
.enable = _clk_enable,
@@ -768,18 +804,7 @@ static struct clk rtc_clk = {
static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
- div = parent_rate / rate;
- if (parent_rate % rate)
- div++;
-
- if (div > 8)
- div = 8;
-
- return parent_rate / div;
+ return _clk_generic_round_rate(clk, rate, 8);
}
static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
@@ -921,7 +946,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
- _REGISTER_CLOCK(NULL, "usb", usb_clk[0])
+ _REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index bd51dd0..169372f 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -69,7 +69,17 @@ static struct map_desc mxc_io_desc[] __initdata = {
* system startup to create static physical to virtual
* memory map for the IO modules.
*/
-void __init mxc_map_io(void)
+void __init mx21_map_io(void)
{
+ mxc_set_cpu_type(MXC_CPU_MX21);
+
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+
+void __init mx27_map_io(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX27);
+
+ iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
new file mode 100644
index 0000000..a5ee461
--- /dev/null
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -0,0 +1,286 @@
+/*
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/imx-uart.h>
+#include <mach/imxfb.h>
+#include <mach/iomux.h>
+#include <mach/mxc_nand.h>
+#include <mach/mmc.h>
+#include <mach/board-mx21ads.h>
+
+#include "devices.h"
+
+static unsigned int mx21ads_pins[] = {
+
+ /* CS8900A */
+ (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
+
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+
+ /* UART3 (IrDA) - only TXD and RXD */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+
+ /* UART4 */
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD,
+
+ /* LCDC */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA24_PF_REV, /* Sharp panel dedicated signal */
+ PA25_PF_CLS, /* Sharp panel dedicated signal */
+ PA26_PF_PS, /* Sharp panel dedicated signal */
+ PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+
+ /* MMC/SDHC */
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+
+ /* NFC */
+ PF0_PF_NRFB,
+ PF1_PF_NFCE,
+ PF2_PF_NFWP,
+ PF3_PF_NFCLE,
+ PF4_PF_NFALE,
+ PF5_PF_NFRE,
+ PF6_PF_NFWE,
+ PF7_PF_NFIO0,
+ PF8_PF_NFIO1,
+ PF9_PF_NFIO2,
+ PF10_PF_NFIO3,
+ PF11_PF_NFIO4,
+ PF12_PF_NFIO5,
+ PF13_PF_NFIO6,
+ PF14_PF_NFIO7,
+};
+
+/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
+static struct physmap_flash_data mx21ads_flash_data = {
+ .width = 4,
+};
+
+static struct resource mx21ads_flash_resource = {
+ .start = CS0_BASE_ADDR,
+ .end = CS0_BASE_ADDR + 0x02000000 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mx21ads_nor_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &mx21ads_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &mx21ads_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct imxuart_platform_data uart_norts_pdata = {
+};
+
+
+static int mx21ads_fb_init(struct platform_device *pdev)
+{
+ u16 tmp;
+
+ tmp = __raw_readw(MX21ADS_IO_REG);
+ tmp |= MX21ADS_IO_LCDON;
+ __raw_writew(tmp, MX21ADS_IO_REG);
+ return 0;
+}
+
+static void mx21ads_fb_exit(struct platform_device *pdev)
+{
+ u16 tmp;
+
+ tmp = __raw_readw(MX21ADS_IO_REG);
+ tmp &= ~MX21ADS_IO_LCDON;
+ __raw_writew(tmp, MX21ADS_IO_REG);
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DB02
+ */
+static struct imx_fb_platform_data mx21ads_fb_data = {
+ .pixclock = 188679, /* in ps */
+ .xres = 240,
+ .yres = 320,
+
+ .bpp = 16,
+ .hsync_len = 2,
+ .left_margin = 6,
+ .right_margin = 16,
+
+ .vsync_len = 1,
+ .upper_margin = 8,
+ .lower_margin = 10,
+ .fixed_screen_cpu = 0,
+
+ .pcr = 0xFB108BC7,
+ .pwmr = 0x00A901ff,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020008,
+
+ .init = mx21ads_fb_init,
+ .exit = mx21ads_fb_exit,
+};
+
+static int mx21ads_sdhc_get_ro(struct device *dev)
+{
+ return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
+}
+
+static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = request_irq(IRQ_GPIOD(25), detect_irq,
+ IRQF_TRIGGER_FALLING, "mmc-detect", data);
+ if (ret)
+ goto out;
+ return 0;
+out:
+ return ret;
+}
+
+static void mx21ads_sdhc_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOD(25), data);
+}
+
+static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
+ .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
+ .get_ro = mx21ads_sdhc_get_ro,
+ .init = mx21ads_sdhc_init,
+ .exit = mx21ads_sdhc_exit,
+};
+
+static struct mxc_nand_platform_data mx21ads_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct map_desc mx21ads_io_desc[] __initdata = {
+ /*
+ * Memory-mapped I/O on MX21ADS Base board:
+ * - CS8900A Ethernet controller
+ * - ST16C2552CJ UART
+ * - CPU and Base board version
+ * - Base board I/O register
+ */
+ {
+ .virtual = MX21ADS_MMIO_BASE_ADDR,
+ .pfn = __phys_to_pfn(CS1_BASE_ADDR),
+ .length = MX21ADS_MMIO_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init mx21ads_map_io(void)
+{
+ mx21_map_io();
+ iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mx21ads_nor_mtd_device,
+};
+
+static void __init mx21ads_board_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
+ "mx21ads");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
+ mxc_register_device(&mxc_uart_device3, &uart_pdata);
+ mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
+ mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
+ mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx21ads_timer_init(void)
+{
+ mx21_clocks_init(32768, 26000000);
+}
+
+static struct sys_timer mx21ads_timer = {
+ .init = mx21ads_timer_init,
+};
+
+MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
+ /* maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx21ads_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mx21ads_board_init,
+ .timer = &mx21ads_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 4a3b097..02dadda 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -23,6 +23,8 @@
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -33,9 +35,117 @@
#include <mach/imx-uart.h>
#include <mach/iomux.h>
#include <mach/board-mx27ads.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
#include "devices.h"
+static unsigned int mx27ads_pins[] = {
+ /* UART0 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* UART1 */
+ PE3_PF_UART2_CTS,
+ PE4_PF_UART2_RTS,
+ PE6_PF_UART2_TXD,
+ PE7_PF_UART2_RXD,
+ /* UART2 */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+ PE10_PF_UART3_CTS,
+ PE11_PF_UART3_RTS,
+ /* UART3 */
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD,
+ /* UART4 */
+ PB18_AF_UART5_TXD,
+ PB19_AF_UART5_RXD,
+ PB20_AF_UART5_CTS,
+ PB21_AF_UART5_RTS,
+ /* UART5 */
+ PB10_AF_UART6_TXD,
+ PB12_AF_UART6_CTS,
+ PB11_AF_UART6_RXD,
+ PB13_AF_UART6_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* I2C2 */
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* FB */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA24_PF_REV,
+ PA25_PF_CLS,
+ PA26_PF_PS,
+ PA27_PF_SPL_SPR,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+ /* OWIRE */
+ PE16_AF_OWIRE,
+ /* SDHC1*/
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+ /* SDHC2*/
+ PB4_PF_SD2_D0,
+ PB5_PF_SD2_D1,
+ PB6_PF_SD2_D2,
+ PB7_PF_SD2_D3,
+ PB8_PF_SD2_CMD,
+ PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
/* ADS's NOR flash */
static struct physmap_flash_data mx27ads_flash_data = {
.width = 2,
@@ -58,189 +168,113 @@ static struct platform_device mx27ads_nor_mtd_device = {
.resource = &mx27ads_flash_resource,
};
-static int mxc_uart0_pins[] = {
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS
+static struct imxi2c_platform_data mx27ads_i2c_data = {
+ .bitrate = 100000,
};
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
- ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart0_pins,
- ARRAY_SIZE(mxc_uart0_pins));
- return 0;
-}
-
-static int mxc_uart1_pins[] = {
- PE3_PF_UART2_CTS,
- PE4_PF_UART2_RTS,
- PE6_PF_UART2_TXD,
- PE7_PF_UART2_RXD
+static struct i2c_board_info mx27ads_i2c_devices[] = {
};
-static int uart_mxc_port1_init(struct platform_device *pdev)
+void lcd_power(int on)
{
- return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins), "UART1");
+ if (on)
+ __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+ else
+ __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
}
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins));
- return 0;
-}
-
-static int mxc_uart2_pins[] = {
- PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
- PE10_PF_UART3_CTS,
- PE11_PF_UART3_RTS
+static struct imx_fb_platform_data mx27ads_fb_data = {
+ .pixclock = 188679,
+ .xres = 240,
+ .yres = 320,
+
+ .bpp = 16,
+ .hsync_len = 1,
+ .left_margin = 9,
+ .right_margin = 16,
+
+ .vsync_len = 1,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .fixed_screen_cpu = 0,
+
+ /*
+ * - HSYNC active high
+ * - VSYNC active high
+ * - clk notenabled while idle
+ * - clock inverted
+ * - data not inverted
+ * - data enable low active
+ * - enable sharp mode
+ */
+ .pcr = 0xFB008BC0,
+ .pwmr = 0x00A903FF,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020010,
+
+ .lcd_power = lcd_power,
};
-static int uart_mxc_port2_init(struct platform_device *pdev)
+static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
{
- return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins), "UART2");
+ return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
+ "sdhc1-card-detect", data);
}
-static int uart_mxc_port2_exit(struct platform_device *pdev)
+static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
{
- mxc_gpio_release_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins));
- return 0;
+ return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
+ "sdhc2-card-detect", data);
}
-static int mxc_uart3_pins[] = {
- PB26_AF_UART4_RTS,
- PB28_AF_UART4_TXD,
- PB29_AF_UART4_CTS,
- PB31_AF_UART4_RXD
-};
-
-static int uart_mxc_port3_init(struct platform_device *pdev)
+static void mx27ads_sdhc1_exit(struct device *dev, void *data)
{
- return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
- ARRAY_SIZE(mxc_uart3_pins), "UART3");
+ free_irq(IRQ_GPIOE(21), data);
}
-static int uart_mxc_port3_exit(struct platform_device *pdev)
+static void mx27ads_sdhc2_exit(struct device *dev, void *data)
{
- mxc_gpio_release_multiple_pins(mxc_uart3_pins,
- ARRAY_SIZE(mxc_uart3_pins));
- return 0;
+ free_irq(IRQ_GPIOB(7), data);
}
-static int mxc_uart4_pins[] = {
- PB18_AF_UART5_TXD,
- PB19_AF_UART5_RXD,
- PB20_AF_UART5_CTS,
- PB21_AF_UART5_RTS
+static struct imxmmc_platform_data sdhc1_pdata = {
+ .init = mx27ads_sdhc1_init,
+ .exit = mx27ads_sdhc1_exit,
};
-static int uart_mxc_port4_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
- ARRAY_SIZE(mxc_uart4_pins), "UART4");
-}
-
-static int uart_mxc_port4_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart4_pins,
- ARRAY_SIZE(mxc_uart4_pins));
- return 0;
-}
-
-static int mxc_uart5_pins[] = {
- PB10_AF_UART6_TXD,
- PB12_AF_UART6_CTS,
- PB11_AF_UART6_RXD,
- PB13_AF_UART6_RTS
+static struct imxmmc_platform_data sdhc2_pdata = {
+ .init = mx27ads_sdhc2_init,
+ .exit = mx27ads_sdhc2_exit,
};
-static int uart_mxc_port5_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
- ARRAY_SIZE(mxc_uart5_pins), "UART5");
-}
-
-static int uart_mxc_port5_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart5_pins,
- ARRAY_SIZE(mxc_uart5_pins));
- return 0;
-}
-
static struct platform_device *platform_devices[] __initdata = {
&mx27ads_nor_mtd_device,
&mxc_fec_device,
+ &mxc_w1_master_device,
};
-static int mxc_fec_pins[] = {
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
- mxc_gpio_setup_multiple_pins(mxc_fec_pins,
- ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
static struct imxuart_platform_data uart_pdata[] = {
{
- .init = uart_mxc_port0_init,
- .exit = uart_mxc_port0_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port1_init,
- .exit = uart_mxc_port1_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port2_init,
- .exit = uart_mxc_port2_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port3_init,
- .exit = uart_mxc_port3_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port4_init,
- .exit = uart_mxc_port4_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port5_init,
- .exit = uart_mxc_port5_exit,
.flags = IMXUART_HAVE_RTSCTS,
},
};
static void __init mx27ads_board_init(void)
{
- gpio_fec_active();
+ mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
+ "mx27ads");
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
@@ -248,6 +282,15 @@ static void __init mx27ads_board_init(void)
mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+ mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
+
+ /* only the i2c master 1 is used on this CPU card */
+ i2c_register_board_info(1, mx27ads_i2c_devices,
+ ARRAY_SIZE(mx27ads_i2c_devices));
+ mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+ mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
+ mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+ mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
@@ -277,7 +320,7 @@ static struct map_desc mx27ads_io_desc[] __initdata = {
static void __init mx27ads_map_io(void)
{
- mxc_map_io();
+ mx27_map_io();
iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
}
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c
new file mode 100644
index 0000000..3ae11cb
--- /dev/null
+++ b/arch/arm/mach-mx2/mx27lite.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27lite.h>
+
+#include "devices.h"
+
+static unsigned int mx27lite_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static void __init mx27lite_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
+ "imx27lite");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27lite_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27lite_timer = {
+ .init = mx27lite_timer_init,
+};
+
+MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mx27lite_init,
+ .timer = &mx27lite_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
new file mode 100644
index 0000000..1d9238c
--- /dev/null
+++ b/arch/arm/mach-mx2/mx27pdk.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27pdk.h>
+
+#include "devices.h"
+
+static unsigned int mx27pdk_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static void __init mx27pdk_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
+ "mx27pdk");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27pdk_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27pdk_timer = {
+ .init = mx27pdk_timer_init,
+};
+
+MACHINE_START(MX27_3DS, "Freescale MX27PDK")
+ /* maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mx27pdk_init,
+ .timer = &mx27pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index aa4eaa6..a4628d0 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -17,28 +17,84 @@
* MA 02110-1301, USA.
*/
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
-#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-pcm038.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/iomux.h>
-#ifdef CONFIG_I2C_IMX
#include <mach/i2c.h>
-#endif
-#include <asm/mach/time.h>
+#include <mach/iomux.h>
#include <mach/imx-uart.h>
-#include <mach/board-pcm038.h>
#include <mach/mxc_nand.h>
#include "devices.h"
+static int pcm038_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* UART2 */
+ PE3_PF_UART2_CTS,
+ PE4_PF_UART2_RTS,
+ PE6_PF_UART2_TXD,
+ PE7_PF_UART2_RXD,
+ /* UART3 */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+ PE10_PF_UART3_CTS,
+ PE11_PF_UART3_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* I2C2 */
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* SPI1 */
+ PD25_PF_CSPI1_RDY,
+ PD27_PF_CSPI1_SS1,
+ PD28_PF_CSPI1_SS0,
+ PD29_PF_CSPI1_SCLK,
+ PD30_PF_CSPI1_MISO,
+ PD31_PF_CSPI1_MOSI,
+ /* SSI1 */
+ PC20_PF_SSI1_FS,
+ PC21_PF_SSI1_RXD,
+ PC22_PF_SSI1_TXD,
+ PC23_PF_SSI1_CLK,
+ /* SSI4 */
+ PC16_PF_SSI4_FS,
+ PC17_PF_SSI4_RXD,
+ PC18_PF_SSI4_TXD,
+ PC19_PF_SSI4_CLK,
+};
+
/*
* Phytec's PCM038 comes with 2MiB battery buffered SRAM,
* 16 bit width
@@ -88,107 +144,16 @@ static struct platform_device pcm038_nor_mtd_device = {
.resource = &pcm038_flash_resource,
};
-static int mxc_uart0_pins[] = {
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS
-};
-
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
- ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart0_pins,
- ARRAY_SIZE(mxc_uart0_pins));
- return 0;
-}
-
-static int mxc_uart1_pins[] = {
- PE3_PF_UART2_CTS,
- PE4_PF_UART2_RTS,
- PE6_PF_UART2_TXD,
- PE7_PF_UART2_RXD
-};
-
-static int uart_mxc_port1_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins));
- return 0;
-}
-
-static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
- PE10_PF_UART3_CTS,
- PE11_PF_UART3_RTS };
-
-static int uart_mxc_port2_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart_mxc_port2_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins));
- return 0;
-}
-
static struct imxuart_platform_data uart_pdata[] = {
{
- .init = uart_mxc_port0_init,
- .exit = uart_mxc_port0_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port1_init,
- .exit = uart_mxc_port1_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port2_init,
- .exit = uart_mxc_port2_exit,
.flags = IMXUART_HAVE_RTSCTS,
},
};
-static int mxc_fec_pins[] = {
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
- mxc_gpio_setup_multiple_pins(mxc_fec_pins,
- ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
static struct mxc_nand_platform_data pcm038_nand_board_info = {
.width = 1,
.hw_ecc = 1,
@@ -210,27 +175,8 @@ static void __init pcm038_init_sram(void)
__raw_writel(0x22220a00, CSCR_A(1));
}
-#ifdef CONFIG_I2C_IMX
-static int mxc_i2c1_pins[] = {
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL
-};
-
-static int pcm038_i2c_1_init(struct device *dev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins),
- "I2C1");
-}
-
-static void pcm038_i2c_1_exit(struct device *dev)
-{
- mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins));
-}
-
static struct imxi2c_platform_data pcm038_i2c_1_data = {
.bitrate = 100000,
- .init = pcm038_i2c_1_init,
- .exit = pcm038_i2c_1_exit,
};
static struct at24_platform_data board_eeprom = {
@@ -253,11 +199,12 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
.type = "lm75"
}
};
-#endif
static void __init pcm038_init(void)
{
- gpio_fec_active();
+ mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
+ "PCM038");
+
pcm038_init_sram();
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
@@ -267,13 +214,11 @@ static void __init pcm038_init(void)
mxc_gpio_mode(PE16_AF_OWIRE);
mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
-#ifdef CONFIG_I2C_IMX
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, pcm038_i2c_devices,
ARRAY_SIZE(pcm038_i2c_devices));
mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
-#endif
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
@@ -295,7 +240,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx27_map_io,
.init_irq = mxc_init_irq,
.init_machine = pcm038_init,
.timer = &pcm038_timer,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index bf4e520..6a3acaf5 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -16,71 +16,107 @@
* MA 02110-1301, USA.
*/
-#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/irq.h>
+#include <linux/platform_device.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/mmc.h>
-#include <mach/imxfb.h>
#include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
#include "devices.h"
-static int pcm970_sdhc2_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_PORTC + 28);
-}
-
-static int pcm970_sdhc2_pins[] = {
+static int pcm970_pins[] = {
+ /* SDHC */
PB4_PF_SD2_D0,
PB5_PF_SD2_D1,
PB6_PF_SD2_D2,
PB7_PF_SD2_D3,
PB8_PF_SD2_CMD,
PB9_PF_SD2_CLK,
+ GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
+ /* display */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA24_PF_REV,
+ PA25_PF_CLS,
+ PA26_PF_PS,
+ PA27_PF_SPL_SPR,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+ /*
+ * it seems the data line misses a pullup, so we must enable
+ * the internal pullup as a local workaround
+ */
+ PD17_PF_I2C_DATA | GPIO_PUEN,
+ PD18_PF_I2C_CLK,
+ /* Camera */
+ PB10_PF_CSI_D0,
+ PB11_PF_CSI_D1,
+ PB12_PF_CSI_D2,
+ PB13_PF_CSI_D3,
+ PB14_PF_CSI_D4,
+ PB15_PF_CSI_MCLK,
+ PB16_PF_CSI_PIXCLK,
+ PB17_PF_CSI_D5,
+ PB18_PF_CSI_D6,
+ PB19_PF_CSI_D7,
+ PB20_PF_CSI_VSYNC,
+ PB21_PF_CSI_HSYNC,
};
+static int pcm970_sdhc2_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_PORTC + 28);
+}
+
static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
{
int ret;
- ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins,
- ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2");
- if(ret)
- return ret;
-
- ret = request_irq(IRQ_GPIOC(29), detect_irq, 0,
+ ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
"imx-mmc-detect", data);
if (ret)
- goto out_release_gpio;
-
- set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING);
+ return ret;
ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
- if (ret)
- goto out_release_gpio;
+ if (ret) {
+ free_irq(IRQ_GPIOC(29), data);
+ return ret;
+ }
- mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN);
gpio_direction_input(GPIO_PORTC + 28);
return 0;
-
-out_release_gpio:
- mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
- ARRAY_SIZE(pcm970_sdhc2_pins));
- return ret;
}
static void pcm970_sdhc2_exit(struct device *dev, void *data)
{
free_irq(IRQ_GPIOC(29), data);
gpio_free(GPIO_PORTC + 28);
- mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
- ARRAY_SIZE(pcm970_sdhc2_pins));
}
static struct imxmmc_platform_data sdhc_pdata = {
@@ -89,29 +125,6 @@ static struct imxmmc_platform_data sdhc_pdata = {
.exit = pcm970_sdhc2_exit,
};
-static int mxc_fb_pins[] = {
- PA5_PF_LSCLK, PA6_PF_LD0, PA7_PF_LD1, PA8_PF_LD2,
- PA9_PF_LD3, PA10_PF_LD4, PA11_PF_LD5, PA12_PF_LD6,
- PA13_PF_LD7, PA14_PF_LD8, PA15_PF_LD9, PA16_PF_LD10,
- PA17_PF_LD11, PA18_PF_LD12, PA19_PF_LD13, PA20_PF_LD14,
- PA21_PF_LD15, PA22_PF_LD16, PA23_PF_LD17, PA24_PF_REV,
- PA25_PF_CLS, PA26_PF_PS, PA27_PF_SPL_SPR, PA28_PF_HSYNC,
- PA29_PF_VSYNC, PA30_PF_CONTRAST, PA31_PF_OE_ACD
-};
-
-static int pcm038_fb_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_fb_pins,
- ARRAY_SIZE(mxc_fb_pins), "FB");
-}
-
-static int pcm038_fb_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins));
-
- return 0;
-}
-
/*
* Connected is a portrait Sharp-QVGA display
* of type: LQ035Q7DH06
@@ -144,9 +157,6 @@ static struct imx_fb_platform_data pcm038_fb_data = {
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
-
- .init = pcm038_fb_init,
- .exit = pcm038_fb_exit,
};
/*
@@ -157,6 +167,9 @@ static struct imx_fb_platform_data pcm038_fb_data = {
*/
void __init pcm970_baseboard_init(void)
{
+ mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
+ "PCM970");
+
mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
}
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 194b842..17a21a2 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -1,10 +1,12 @@
if ARCH_MX3
config ARCH_MX31
+ select ARCH_HAS_RNGA
bool
config ARCH_MX35
bool
+ select ARCH_MXC_IOMUX_V3
comment "MX3 platforms:"
@@ -37,7 +39,6 @@ config MACH_PCM037
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
select ARCH_MX31
- default n
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
@@ -45,7 +46,6 @@ config MACH_MX31LITE
config MACH_MX31_3DS
bool "Support MX31PDK (3DS)"
select ARCH_MX31
- default n
help
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
@@ -53,17 +53,43 @@ config MACH_MX31_3DS
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select ARCH_MX31
- default n
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
+config MACH_MX31LILLY
+ bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+ select ARCH_MX31
+ help
+ Include support for mx31 based LILLY1131 modules. This includes
+ specific configurations for the board and its peripherals.
+
config MACH_QONG
bool "Support Dave/DENX QongEVB-LITE platform"
select ARCH_MX31
- default n
help
Include support for Dave/DENX QongEVB-LITE platform. This includes
specific configurations for the board and its peripherals.
+config MACH_PCM043
+ bool "Support Phytec pcm043 (i.MX35) platforms"
+ select ARCH_MX35
+ help
+ Include support for Phytec pcm043 platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+ bool "Support Atmark Armadillo-500 Development Base Board"
+ select ARCH_MX31
+ help
+ Include support for Atmark Armadillo-500 platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+ bool "Support MX35PDK platform"
+ select ARCH_MX35
+ default n
+ help
+ Include support for MX35PDK platform. This includes specific
+ configurations for the board and its peripherals.
endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 272c8a9..0322696 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -8,9 +8,13 @@ obj-y := mm.o devices.o
obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o
obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o
obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o
obj-$(CONFIG_MACH_PCM037) += pcm037.o
obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o
obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o
obj-$(CONFIG_MACH_QONG) += qong.o
+obj-$(CONFIG_MACH_PCM043) += pcm043.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
+obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
new file mode 100644
index 0000000..54118109
--- /dev/null
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -0,0 +1,295 @@
+/*
+ * armadillo5x0.c
+ *
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * updates in http://alberdroid.blogspot.com/
+ *
+ * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
+ * Based on mx31ads.c and pcm037.c Great Work!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-armadillo5x0.h>
+#include <mach/mmc.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include "devices.h"
+
+static int armadillo5x0_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ /* UART2 */
+ MX31_PIN_CTS2__CTS2,
+ MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2,
+ MX31_PIN_RXD2__RXD2,
+ /* LAN9118_IRQ */
+ IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
+ /* Framebuffer */
+ MX31_PIN_LD0__LD0,
+ MX31_PIN_LD1__LD1,
+ MX31_PIN_LD2__LD2,
+ MX31_PIN_LD3__LD3,
+ MX31_PIN_LD4__LD4,
+ MX31_PIN_LD5__LD5,
+ MX31_PIN_LD6__LD6,
+ MX31_PIN_LD7__LD7,
+ MX31_PIN_LD8__LD8,
+ MX31_PIN_LD9__LD9,
+ MX31_PIN_LD10__LD10,
+ MX31_PIN_LD11__LD11,
+ MX31_PIN_LD12__LD12,
+ MX31_PIN_LD13__LD13,
+ MX31_PIN_LD14__LD14,
+ MX31_PIN_LD15__LD15,
+ MX31_PIN_LD16__LD16,
+ MX31_PIN_LD17__LD17,
+ MX31_PIN_VSYNC3__VSYNC3,
+ MX31_PIN_HSYNC__HSYNC,
+ MX31_PIN_FPSHIFT__FPSHIFT,
+ MX31_PIN_DRDY0__DRDY0,
+ IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+
+};
+
+/*
+ * FB support
+ */
+static const struct fb_videomode fb_modedb[] = {
+ { /* 640x480 @ 60 Hz */
+ .name = "CRT-VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39721,
+ .left_margin = 35,
+ .right_margin = 115,
+ .upper_margin = 43,
+ .lower_margin = 1,
+ .hsync_len = 10,
+ .vsync_len = 1,
+ .sync = FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {/* 800x600 @ 56 Hz */
+ .name = "CRT-SVGA",
+ .refresh = 56,
+ .xres = 800,
+ .yres = 600,
+ .pixclock = 30000,
+ .left_margin = 30,
+ .right_margin = 108,
+ .upper_margin = 13,
+ .lower_margin = 10,
+ .hsync_len = 10,
+ .vsync_len = 1,
+ .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "CRT-VGA",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
+};
+
+/*
+ * SDHC 1
+ * MMC support
+ */
+static int armadillo5x0_sdhc1_get_ro(struct device *dev)
+{
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static int armadillo5x0_sdhc1_init(struct device *dev,
+ irq_handler_t detect_irq, void *data)
+{
+ int ret;
+ int gpio_det, gpio_wp;
+
+ gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
+ gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
+
+ ret = gpio_request(gpio_det, "sdhc-card-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(gpio_det);
+
+ ret = gpio_request(gpio_wp, "sdhc-write-protect");
+ if (ret)
+ goto err_gpio_free;
+
+ gpio_direction_input(gpio_wp);
+
+ /* When supported the trigger type have to be BOTH */
+ ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "sdhc-detect", data);
+
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(gpio_wp);
+
+err_gpio_free:
+ gpio_free(gpio_det);
+
+ return ret;
+
+}
+
+static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
+ gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
+ gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+ .get_ro = armadillo5x0_sdhc1_get_ro,
+ .init = armadillo5x0_sdhc1_init,
+ .exit = armadillo5x0_sdhc1_exit,
+};
+
+/*
+ * SMSC 9118
+ * Network support
+ */
+static struct resource armadillo5x0_smc911x_resources[] = {
+ {
+ .start = CS3_BASE_ADDR,
+ .end = CS3_BASE_ADDR + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+ .flags = SMSC911X_USE_32BIT,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device armadillo5x0_smc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(armadillo5x0_smc911x_resources),
+ .resource = armadillo5x0_smc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_info,
+ },
+};
+
+/* UART device data */
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &armadillo5x0_smc911x_device,
+};
+
+/*
+ * Perform board specific initializations
+ */
+static void __init armadillo5x0_init(void)
+{
+ mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
+ ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ /* Register UART */
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+ /* SMSC9118 IRQ pin */
+ gpio_direction_input(MX31_PIN_GPIO1_0);
+
+ /* Register SDHC */
+ mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+
+ /* Register FB */
+ mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+ mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init armadillo5x0_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+static struct sys_timer armadillo5x0_timer = {
+ .init = armadillo5x0_timer_init,
+};
+
+MACHINE_START(ARMADILLO5X0, "Armadillo-500")
+ /* Maintainer: Alberto Panizzo */
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x00000100,
+ .map_io = mx31_map_io,
+ .init_irq = mxc_init_irq,
+ .timer = &armadillo5x0_timer,
+ .init_machine = armadillo5x0_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 3c1e06f..577ee83 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -147,34 +147,16 @@ static struct arm_ahb_div clk_consumer[] = {
{ .arm = 0, .ahb = 0, .sel = 0},
};
-static struct arm_ahb_div clk_automotive[] = {
- { .arm = 1, .ahb = 3, .sel = 0},
- { .arm = 1, .ahb = 2, .sel = 1},
- { .arm = 2, .ahb = 1, .sel = 1},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 1, .ahb = 6, .sel = 0},
- { .arm = 1, .ahb = 4, .sel = 1},
- { .arm = 2, .ahb = 2, .sel = 1},
- { .arm = 0, .ahb = 0, .sel = 0},
-};
-
static unsigned long get_rate_arm(void)
{
unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
struct arm_ahb_div *aad;
unsigned long fref = get_rate_mpll();
- if (pdr0 & 1) {
- /* consumer path */
- aad = &clk_consumer[(pdr0 >> 16) & 0xf];
- if (aad->sel)
- fref = fref * 2 / 3;
- } else {
- /* auto path */
- aad = &clk_automotive[(pdr0 >> 9) & 0x7];
- if (aad->sel)
- fref = fref * 3 / 4;
- }
+ aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+ if (aad->sel)
+ fref = fref * 2 / 3;
+
return fref / aad->arm;
}
@@ -184,12 +166,7 @@ static unsigned long get_rate_ahb(struct clk *clk)
struct arm_ahb_div *aad;
unsigned long fref = get_rate_mpll();
- if (pdr0 & 1)
- /* consumer path */
- aad = &clk_consumer[(pdr0 >> 16) & 0xf];
- else
- /* auto path */
- aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+ aad = &clk_consumer[(pdr0 >> 16) & 0xf];
return fref / aad->ahb;
}
@@ -430,7 +407,8 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
_REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
- _REGISTER_CLOCK(NULL, "ipu", ipu_clk)
+ _REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+ _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
_REGISTER_CLOCK(NULL, "mlb", mlb_clk)
_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
@@ -462,8 +440,6 @@ int __init mx35_clocks_init()
int i;
unsigned int ll = 0;
- mxc_set_cpu_type(MXC_CPU_MX35);
-
#ifdef CONFIG_DEBUG_LL_CONSOLE
ll = (3 << 16);
#endif
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index a68fcf9..8b14239 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -483,7 +483,7 @@ DEFINE_CLOCK(i2c3_clk, 2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk);
DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &ahb_clk);
+DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk);
DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
@@ -566,13 +566,18 @@ int __init mx31_clocks_init(unsigned long fref)
u32 reg;
int i;
- mxc_set_cpu_type(MXC_CPU_MX31);
-
ckih_rate = fref;
for (i = 0; i < ARRAY_SIZE(lookups); i++)
clkdev_add(&lookups[i]);
+ /* change the csi_clk parent if necessary */
+ reg = __raw_readl(MXC_CCM_CCMR);
+ if (!(reg & MXC_CCM_CCMR_CSCS))
+ if (clk_set_parent(&csi_clk, &usb_pll_clk))
+ pr_err("%s: error changing csi_clk parent\n", __func__);
+
+
/* Turn off all possible clocks */
__raw_writel((3 << 4), MXC_CCM_CGR0);
__raw_writel(0, MXC_CCM_CGR1);
@@ -581,6 +586,12 @@ int __init mx31_clocks_init(unsigned long fref)
MX32, but still required to be set */
MXC_CCM_CGR2);
+ /*
+ * Before turning off usb_pll make sure ipg_per_clk is generated
+ * by ipg_clk and not usb_pll.
+ */
+ __raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
+
usb_pll_disable(&usb_pll_clk);
pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 380be0c..d927edd 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -17,13 +17,17 @@
* Boston, MA 02110-1301, USA.
*/
+#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
+#include <mach/common.h>
#include <mach/imx-uart.h>
+#include <mach/mx3_camera.h>
#include "devices.h"
@@ -283,6 +287,21 @@ struct platform_device mxcsdhc_device1 = {
.num_resources = ARRAY_SIZE(mxcsdhc1_resources),
.resource = mxcsdhc1_resources,
};
+
+static struct resource rnga_resources[] = {
+ {
+ .start = RNGA_BASE_ADDR,
+ .end = RNGA_BASE_ADDR + 0x28,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device mxc_rnga_device = {
+ .name = "mxc_rnga",
+ .id = -1,
+ .num_resources = 1,
+ .resource = rnga_resources,
+};
#endif /* CONFIG_ARCH_MX31 */
/* i.MX31 Image Processing Unit */
@@ -329,10 +348,54 @@ struct platform_device mx3_fb = {
.num_resources = ARRAY_SIZE(fb_resources),
.resource = fb_resources,
.dev = {
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
+static struct resource camera_resources[] = {
+ {
+ .start = IPU_CTRL_BASE_ADDR + 0x60,
+ .end = IPU_CTRL_BASE_ADDR + 0x87,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device mx3_camera = {
+ .name = "mx3-camera",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(camera_resources),
+ .resource = camera_resources,
+ .dev = {
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static struct resource otg_resources[] = {
+ {
+ .start = OTG_BASE_ADDR,
+ .end = OTG_BASE_ADDR + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_USB3,
+ .end = MXC_INT_USB3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+ .name = "fsl-usb2-udc",
+ .id = -1,
+ .dev = {
+ .dma_mask = &otg_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = otg_resources,
+ .num_resources = ARRAY_SIZE(otg_resources),
+};
+
#ifdef CONFIG_ARCH_MX35
static struct resource mxc_fec_resources[] = {
{
@@ -359,6 +422,7 @@ static int mx3_devices_init(void)
if (cpu_is_mx31()) {
mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+ mxc_register_device(&mxc_rnga_device, NULL);
}
if (cpu_is_mx35()) {
mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 88c04b2..ffd494d 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -11,6 +11,10 @@ extern struct platform_device mxc_i2c_device1;
extern struct platform_device mxc_i2c_device2;
extern struct platform_device mx3_ipu;
extern struct platform_device mx3_fb;
+extern struct platform_device mx3_camera;
extern struct platform_device mxc_fec_device;
extern struct platform_device mxcsdhc_device0;
extern struct platform_device mxcsdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_rnga_device;
+
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index 40ffc5a..c66ccbc 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -21,7 +21,6 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/kernel.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
@@ -94,15 +93,13 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
EXPORT_SYMBOL(mxc_iomux_set_pad);
/*
- * setups a single pin:
+ * allocs a single pin:
* - reserves the pin so that it is not claimed by another driver
* - setups the iomux according to the configuration
- * - if the pin is configured as a GPIO, we claim it through kernel gpiolib
*/
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
{
unsigned pad = pin & IOMUX_PADNUM_MASK;
- unsigned gpio;
if (pad >= (PIN_MAX + 1)) {
printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
@@ -113,19 +110,13 @@ int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
pad, label ? label : "?");
- return -EINVAL;
+ return -EBUSY;
}
mxc_iomux_mode(pin);
- /* if we have a gpio, we can allocate it */
- gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
- if (gpio < (GPIO_PORT_MAX + 1) * 32)
- if (gpio_request(gpio, label))
- return -EINVAL;
-
return 0;
}
-EXPORT_SYMBOL(mxc_iomux_setup_pin);
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
const char *label)
@@ -135,7 +126,8 @@ int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
int ret = -EINVAL;
for (i = 0; i < count; i++) {
- if (mxc_iomux_setup_pin(*p, label))
+ ret = mxc_iomux_alloc_pin(*p, label);
+ if (ret)
goto setup_error;
p++;
}
@@ -150,14 +142,9 @@ EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
void mxc_iomux_release_pin(const unsigned int pin)
{
unsigned pad = pin & IOMUX_PADNUM_MASK;
- unsigned gpio;
if (pad < (PIN_MAX + 1))
clear_bit(pad, mxc_pin_alloc_map);
-
- gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
- if (gpio < (GPIO_PORT_MAX + 1) * 32)
- gpio_free(gpio);
}
EXPORT_SYMBOL(mxc_iomux_release_pin);
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 9e1459c..1f5fdd4 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -72,8 +72,17 @@ static struct map_desc mxc_io_desc[] __initdata = {
* system startup to create static physical to virtual memory mappings
* for the IO modules.
*/
-void __init mxc_map_io(void)
+void __init mx31_map_io(void)
{
+ mxc_set_cpu_type(MXC_CPU_MX31);
+
+ iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx35_map_io(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX35);
+
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index a6d6efe..30e2767 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -187,7 +187,7 @@ static void __init mx31ads_init_expio(void)
/*
* Configure INT line as GPIO input
*/
- mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
+ mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
/* disable the interrupt and clear the status */
__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
@@ -511,7 +511,7 @@ static struct map_desc mx31ads_io_desc[] __initdata = {
*/
static void __init mx31ads_map_io(void)
{
- mxc_map_io();
+ mx31_map_io();
iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
}
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
new file mode 100644
index 0000000..3b3a78f
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -0,0 +1,216 @@
+/*
+ * LILLY-1131 development board support
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * based on code for other MX31 boards,
+ *
+ * Copyright 2005-2007 Freescale Semiconductor
+ * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+#include <mach/mmc.h>
+#include <mach/mx3fb.h>
+#include <mach/ipu.h>
+
+#include "devices.h"
+
+/*
+ * This file contains board-specific initialization routines for the
+ * LILLY-1131 development board. If you design an own baseboard for the
+ * module, use this file as base for support code.
+ */
+
+static unsigned int lilly_db_board_pins[] __initdata = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ MX31_PIN_CTS2__CTS2,
+ MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2,
+ MX31_PIN_RXD2__RXD2,
+ MX31_PIN_CSPI3_MOSI__RXD3,
+ MX31_PIN_CSPI3_MISO__TXD3,
+ MX31_PIN_CSPI3_SCLK__RTS3,
+ MX31_PIN_CSPI3_SPI_RDY__CTS3,
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
+ MX31_PIN_LD0__LD0,
+ MX31_PIN_LD1__LD1,
+ MX31_PIN_LD2__LD2,
+ MX31_PIN_LD3__LD3,
+ MX31_PIN_LD4__LD4,
+ MX31_PIN_LD5__LD5,
+ MX31_PIN_LD6__LD6,
+ MX31_PIN_LD7__LD7,
+ MX31_PIN_LD8__LD8,
+ MX31_PIN_LD9__LD9,
+ MX31_PIN_LD10__LD10,
+ MX31_PIN_LD11__LD11,
+ MX31_PIN_LD12__LD12,
+ MX31_PIN_LD13__LD13,
+ MX31_PIN_LD14__LD14,
+ MX31_PIN_LD15__LD15,
+ MX31_PIN_LD16__LD16,
+ MX31_PIN_LD17__LD17,
+ MX31_PIN_VSYNC3__VSYNC3,
+ MX31_PIN_HSYNC__HSYNC,
+ MX31_PIN_FPSHIFT__FPSHIFT,
+ MX31_PIN_DRDY0__DRDY0,
+ MX31_PIN_CONTRAST__CONTRAST,
+};
+
+/* UART */
+static struct imxuart_platform_data uart_pdata __initdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* MMC support */
+
+static int mxc_mmc1_get_ro(struct device *dev)
+{
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+}
+
+static int gpio_det, gpio_wp;
+
+static int mxc_mmc1_init(struct device *dev,
+ irq_handler_t detect_irq, void *data)
+{
+ int ret;
+
+ gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
+ gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
+
+ ret = gpio_request(gpio_det, "MMC detect");
+ if (ret)
+ return ret;
+
+ ret = gpio_request(gpio_wp, "MMC w/p");
+ if (ret)
+ goto exit_free_det;
+
+ gpio_direction_input(gpio_det);
+ gpio_direction_input(gpio_wp);
+
+ ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "MMC detect", data);
+ if (ret)
+ goto exit_free_wp;
+
+ return 0;
+
+exit_free_wp:
+ gpio_free(gpio_wp);
+
+exit_free_det:
+ gpio_free(gpio_det);
+
+ return ret;
+}
+
+static void mxc_mmc1_exit(struct device *dev, void *data)
+{
+ gpio_free(gpio_det);
+ gpio_free(gpio_wp);
+ free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+}
+
+static struct imxmmc_platform_data mmc_pdata = {
+ .get_ro = mxc_mmc1_get_ro,
+ .init = mxc_mmc1_init,
+ .exit = mxc_mmc1_exit,
+};
+
+/* Framebuffer support */
+static struct ipu_platform_data ipu_data __initdata = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static const struct fb_videomode fb_modedb = {
+ /* 640x480 TFT panel (IPS-056T) */
+ .name = "CRT-VGA",
+ .refresh = 64,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 30000,
+ .left_margin = 200,
+ .right_margin = 2,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+};
+
+static struct mx3fb_platform_data fb_pdata __initdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "CRT-VGA",
+ .mode = &fb_modedb,
+ .num_modes = 1,
+};
+
+#define LCD_VCC_EN_GPIO (7)
+
+static void __init mx31lilly_init_fb(void)
+{
+ if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) {
+ printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n");
+ return;
+ }
+
+ mxc_register_device(&mx3_ipu, &ipu_data);
+ mxc_register_device(&mx3_fb, &fb_pdata);
+ gpio_direction_output(LCD_VCC_EN_GPIO, 1);
+}
+
+void __init mx31lilly_db_init(void)
+{
+ mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
+ ARRAY_SIZE(lilly_db_board_pins),
+ "development board pins");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+ mxc_register_device(&mxc_uart_device2, &uart_pdata);
+ mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+ mx31lilly_init_fb();
+}
+
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
new file mode 100644
index 0000000..6ab2f16
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -0,0 +1,155 @@
+/*
+ * LILLY-1131 module support
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * based on code for other MX31 boards,
+ *
+ * Copyright 2005-2007 Freescale Semiconductor
+ * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+
+#include "devices.h"
+
+/*
+ * This file contains module-specific initialization routines for LILLY-1131.
+ * Initialization of peripherals found on the baseboard is implemented in the
+ * appropriate baseboard support code.
+ */
+
+/* SMSC ethernet support */
+
+static struct resource smsc91x_resources[] = {
+ {
+ .start = CS4_BASE_ADDR,
+ .end = CS4_BASE_ADDR + 0xffff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+ }
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT |
+ SMSC911X_SAVE_MAC_ADDRESS |
+ SMSC911X_FORCE_INTERNAL_PHY,
+};
+
+static struct platform_device smsc91x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc91x_resources),
+ .resource = smsc91x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ }
+};
+
+/* NOR flash */
+static struct physmap_flash_data nor_flash_data = {
+ .width = 2,
+};
+
+static struct resource nor_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .resource = &nor_flash_resource,
+ .num_resources = 1,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &smsc91x_device,
+ &physmap_flash_device,
+ &mxc_i2c_device1,
+};
+
+static int mx31lilly_baseboard;
+core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
+
+static void __init mx31lilly_board_init(void)
+{
+ switch (mx31lilly_baseboard) {
+ case MX31LILLY_NOBOARD:
+ break;
+ case MX31LILLY_DB:
+ mx31lilly_db_init();
+ break;
+ default:
+ printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
+ mx31lilly_baseboard);
+ }
+
+ mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA");
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init mx31lilly_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31lilly_timer = {
+ .init = mx31lilly_timer_init,
+};
+
+MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx31_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mx31lilly_board_init,
+ .timer = &mx31lilly_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 894d98c..86fe70f 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -22,6 +22,9 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -32,11 +35,64 @@
#include <asm/page.h>
#include <asm/setup.h>
#include <mach/board-mx31lite.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/irqs.h>
+#include <mach/mxc_nand.h>
+#include "devices.h"
/*
* This file contains the board-specific initialization routines.
*/
+static unsigned int mx31lite_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ /* LAN9117 IRQ pin */
+ IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT,
+};
+
+static struct resource smsc911x_resources[] = {
+ [0] = {
+ .start = CS4_BASE_ADDR,
+ .end = CS4_BASE_ADDR + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+ .end = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
+};
+
/*
* This structure defines the MX31 memory map.
*/
@@ -59,7 +115,7 @@ static struct map_desc mx31lite_io_desc[] __initdata = {
*/
void __init mx31lite_map_io(void)
{
- mxc_map_io();
+ mx31_map_io();
iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
}
@@ -68,6 +124,22 @@ void __init mx31lite_map_io(void)
*/
static void __init mxc_board_init(void)
{
+ int ret;
+
+ mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
+ "mx31lite");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+
+ /* SMSC9117 IRQ pin */
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
+ if (ret)
+ pr_warning("could not get LAN irq gpio\n");
+ else {
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+ platform_device_register(&smsc911x_device);
+ }
}
static void __init mx31lite_timer_init(void)
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index d080b4a..4704405 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -16,33 +16,142 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
#include <linux/init.h>
-
+#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/types.h>
-#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
#include "devices.h"
+static unsigned int devboard_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+ /* SDHC2 */
+ MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+ MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+ MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+ MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+ /* USB OTG */
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+ MX31_PIN_USB_OC__GPIO1_30,
+};
+
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static int mxc_uart1_pins[] = {
- MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int devboard_sdhc2_get_ro(struct device *dev)
+{
+ return gpio_get_value(SDHC2_WP);
+}
+
+static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(SDHC2_CD, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC2_CD);
+
+ ret = gpio_request(SDHC2_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC2_WP);
+
+ ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "sdhc2-card-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(SDHC2_WP);
+err_gpio_free:
+ gpio_free(SDHC2_CD);
+
+ return ret;
+}
+
+static void devboard_sdhc2_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(SDHC2_CD), data);
+ gpio_free(SDHC2_WP);
+ gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+ .get_ro = devboard_sdhc2_get_ro,
+ .init = devboard_sdhc2_init,
+ .exit = devboard_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
};
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void devboard_usbotg_init(void)
+{
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+ gpio_request(OTG_EN_B, "usb-udc-en");
+ gpio_direction_output(OTG_EN_B, 0);
+}
+
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
void __init mx31moboard_devboard_init(void)
{
printk(KERN_INFO "Initializing mx31devboard peripherals\n");
- mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1");
+
+ mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
+ "devboard");
+
mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+ mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+ devboard_usbotg_init();
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 9ef9566..641c3d6 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,22 +16,144 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
#include <linux/init.h>
-
+#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/types.h>
-#include <mach/hardware.h>
#include <mach/common.h>
+#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/mmc.h>
#include "devices.h"
+static unsigned int marxbot_pins[] = {
+ /* SDHC2 */
+ MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+ MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+ MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+ MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+ /* CSI */
+ MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+ MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+ MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+ MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+ MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+ MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+ MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+ MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+ MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+ MX31_PIN_TXD2__GPIO1_28,
+ /* USB OTG */
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+ MX31_PIN_USB_OC__GPIO1_30,
+};
+
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int marxbot_sdhc2_get_ro(struct device *dev)
+{
+ return gpio_get_value(SDHC2_WP);
+}
+
+static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(SDHC2_CD, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC2_CD);
+
+ ret = gpio_request(SDHC2_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC2_WP);
+
+ ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "sdhc2-card-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(SDHC2_WP);
+err_gpio_free:
+ gpio_free(SDHC2_CD);
+
+ return ret;
+}
+
+static void marxbot_sdhc2_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(SDHC2_CD), data);
+ gpio_free(SDHC2_WP);
+ gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+ .get_ro = marxbot_sdhc2_get_ro,
+ .init = marxbot_sdhc2_init,
+ .exit = marxbot_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void marxbot_usbotg_init(void)
+{
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+ gpio_request(OTG_EN_B, "usb-udc-en");
+ gpio_direction_output(OTG_EN_B, 0);
+}
+
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
void __init mx31moboard_marxbot_init(void)
{
printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
+
+ mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
+ "marxbot");
+
+ mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+ marxbot_usbotg_init();
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 34c2a1b9..a17f2e4 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -16,26 +16,47 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
-
-#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/memory.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
-#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
+#include <mach/board-mx31moboard.h>
#include <mach/common.h>
+#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
-#include <mach/board-mx31moboard.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
#include "devices.h"
+static unsigned int moboard_pins[] = {
+ /* UART0 */
+ MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+ /* UART4 */
+ MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
+ MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+ /* I2C0 */
+ MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
+ /* I2C1 */
+ MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
+ MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+};
+
static struct physmap_flash_data mx31moboard_flash_data = {
.width = 2,
};
@@ -60,17 +81,69 @@ static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct platform_device *devices[] __initdata = {
- &mx31moboard_flash,
+static struct imxi2c_platform_data moboard_i2c0_pdata = {
+ .bitrate = 400000,
};
-static int mxc_uart0_pins[] = {
- MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+static struct imxi2c_platform_data moboard_i2c1_pdata = {
+ .bitrate = 100000,
};
-static int mxc_uart4_pins[] = {
- MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
- MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+
+#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
+#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
+
+static int moboard_sdhc1_get_ro(struct device *dev)
+{
+ return gpio_get_value(SDHC1_WP);
+}
+
+static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(SDHC1_CD, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC1_CD);
+
+ ret = gpio_request(SDHC1_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC1_WP);
+
+ ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "sdhc1-card-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(SDHC1_WP);
+err_gpio_free:
+ gpio_free(SDHC1_CD);
+
+ return ret;
+}
+
+static void moboard_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(SDHC1_CD), data);
+ gpio_free(SDHC1_WP);
+ gpio_free(SDHC1_CD);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+ .get_ro = moboard_sdhc1_get_ro,
+ .init = moboard_sdhc1_init,
+ .exit = moboard_sdhc1_exit,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &mx31moboard_flash,
};
static int mx31moboard_baseboard;
@@ -81,14 +154,19 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
*/
static void __init mxc_board_init(void)
{
+ mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
+ "moboard");
+
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
- mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4");
mxc_register_device(&mxc_uart_device4, &uart_pdata);
+ mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
+ mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
+
+ mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+
switch (mx31moboard_baseboard) {
case MX31NOBOARD:
break;
@@ -99,7 +177,8 @@ static void __init mxc_board_init(void)
mx31moboard_marxbot_init();
break;
default:
- printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard);
+ printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
+ mx31moboard_baseboard);
}
}
@@ -117,7 +196,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx31_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31moboard_timer,
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index bc63f17..c19838d 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -20,6 +20,9 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -41,21 +44,192 @@
* @ingroup System
*/
+static int mx31pdk_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+};
+
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static int uart_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
+/*
+ * Support for the SMSC9217 on the Debug board.
+ */
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource smsc911x_resources[] = {
+ {
+ .start = LAN9217_BASE_ADDR,
+ .end = LAN9217_BASE_ADDR + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = EXPIO_INT_ENET,
+ .end = EXPIO_INT_ENET,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
};
-static inline void mxc_init_imx_uart(void)
+/*
+ * Routines for the CPLD on the debug board. It contains a CPLD handling
+ * LEDs, switches, interrupts for Ethernet.
+ */
+
+static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
{
- mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ uint32_t imr_val;
+ uint32_t int_valid;
+ uint32_t expio_irq;
+
+ imr_val = __raw_readw(CPLD_INT_MASK_REG);
+ int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val;
+
+ expio_irq = MXC_EXP_IO_BASE;
+ for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+ if ((int_valid & 1) == 0)
+ continue;
+ generic_handle_irq(expio_irq);
+ }
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq an expio virtual irq number
+ */
+static void expio_mask_irq(uint32_t irq)
+{
+ uint16_t reg;
+ uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+ /* mask the interrupt */
+ reg = __raw_readw(CPLD_INT_MASK_REG);
+ reg |= 1 << expio;
+ __raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq an expanded io virtual irq number
+ */
+static void expio_ack_irq(uint32_t irq)
+{
+ uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+ /* clear the interrupt status */
+ __raw_writew(1 << expio, CPLD_INT_RESET_REG);
+ __raw_writew(0, CPLD_INT_RESET_REG);
+ /* mask the interrupt */
+ expio_mask_irq(irq);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq a expio virtual irq number
+ */
+static void expio_unmask_irq(uint32_t irq)
+{
+ uint16_t reg;
+ uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+ /* unmask the interrupt */
+ reg = __raw_readw(CPLD_INT_MASK_REG);
+ reg &= ~(1 << expio);
+ __raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+ .ack = expio_ack_irq,
+ .mask = expio_mask_irq,
+ .unmask = expio_unmask_irq,
+};
+
+static int __init mx31pdk_init_expio(void)
+{
+ int i;
+ int ret;
+
+ /* Check if there's a debug board connected */
+ if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) ||
+ (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) ||
+ (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) {
+ /* No Debug board found */
+ return -ENODEV;
+ }
+
+ pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
+ __raw_readw(CPLD_CODE_VER_REG));
+
+ /*
+ * Configure INT line as GPIO input
+ */
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq");
+ if (ret)
+ pr_warning("could not get LAN irq gpio\n");
+ else
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+ /* Disable the interrupts and clear the status */
+ __raw_writew(0, CPLD_INT_MASK_REG);
+ __raw_writew(0xFFFF, CPLD_INT_RESET_REG);
+ __raw_writew(0, CPLD_INT_RESET_REG);
+ __raw_writew(0x1F, CPLD_INT_MASK_REG);
+ for (i = MXC_EXP_IO_BASE;
+ i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+ i++) {
+ set_irq_chip(i, &expio_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
+ set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
+
+ return 0;
+}
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31pdk_io_desc[] __initdata = {
+ {
+ .virtual = SPBA0_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+ .length = SPBA0_SIZE,
+ .type = MT_DEVICE_NONSHARED,
+ }, {
+ .virtual = CS5_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(CS5_BASE_ADDR),
+ .length = CS5_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init mx31pdk_map_io(void)
+{
+ mx31_map_io();
+ iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
}
/*!
@@ -63,7 +237,13 @@ static inline void mxc_init_imx_uart(void)
*/
static void __init mxc_board_init(void)
{
- mxc_init_imx_uart();
+ mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
+ "mx31pdk");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ if (!mx31pdk_init_expio())
+ platform_device_register(&smsc911x_device);
}
static void __init mx31pdk_timer_init(void)
@@ -84,7 +264,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx31pdk_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31pdk_timer,
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
new file mode 100644
index 0000000..6d15374
--- /dev/null
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx35.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static struct pad_desc mx35pdk_pads[] = {
+ /* UART1 */
+ MX35_PAD_CTS1__UART1_CTS,
+ MX35_PAD_RTS1__UART1_RTS,
+ MX35_PAD_TXD1__UART1_TXD_MUX,
+ MX35_PAD_RXD1__UART1_RXD_MUX,
+ /* FEC */
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX35_PAD_FEC_COL__FEC_COL,
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX35_PAD_FEC_MDC__FEC_MDC,
+ MX35_PAD_FEC_MDIO__FEC_MDIO,
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+ MX35_PAD_FEC_CRS__FEC_CRS,
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+
+static void __init mx35pdk_timer_init(void)
+{
+ mx35_clocks_init();
+}
+
+struct sys_timer mx35pdk_timer = {
+ .init = mx35pdk_timer_init,
+};
+
+MACHINE_START(MX35_3DS, "Freescale MX35PDK")
+ /* Maintainer: Freescale Semiconductor, Inc */
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx35_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &mx35pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index b5227d8..c6f61a1 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -28,6 +28,10 @@
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -37,7 +41,9 @@
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
#include <mach/board-pcm037.h>
+#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
#include <mach/mmc.h>
#ifdef CONFIG_I2C_IMX
@@ -46,6 +52,76 @@
#include "devices.h"
+static unsigned int pcm037_pins[] = {
+ /* I2C */
+ MX31_PIN_CSPI2_MOSI__SCL,
+ MX31_PIN_CSPI2_MISO__SDA,
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
+ IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
+ IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
+ /* SPI1 */
+ MX31_PIN_CSPI1_MOSI__MOSI,
+ MX31_PIN_CSPI1_MISO__MISO,
+ MX31_PIN_CSPI1_SCLK__SCLK,
+ MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI1_SS0__SS0,
+ MX31_PIN_CSPI1_SS1__SS1,
+ MX31_PIN_CSPI1_SS2__SS2,
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ /* UART2 */
+ MX31_PIN_TXD2__TXD2,
+ MX31_PIN_RXD2__RXD2,
+ MX31_PIN_CTS2__CTS2,
+ MX31_PIN_RTS2__RTS2,
+ /* UART3 */
+ MX31_PIN_CSPI3_MOSI__RXD3,
+ MX31_PIN_CSPI3_MISO__TXD3,
+ MX31_PIN_CSPI3_SCLK__RTS3,
+ MX31_PIN_CSPI3_SPI_RDY__CTS3,
+ /* LAN9217 irq pin */
+ IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+ /* Onewire */
+ MX31_PIN_BATT_LINE__OWIRE,
+ /* Framebuffer */
+ MX31_PIN_LD0__LD0,
+ MX31_PIN_LD1__LD1,
+ MX31_PIN_LD2__LD2,
+ MX31_PIN_LD3__LD3,
+ MX31_PIN_LD4__LD4,
+ MX31_PIN_LD5__LD5,
+ MX31_PIN_LD6__LD6,
+ MX31_PIN_LD7__LD7,
+ MX31_PIN_LD8__LD8,
+ MX31_PIN_LD9__LD9,
+ MX31_PIN_LD10__LD10,
+ MX31_PIN_LD11__LD11,
+ MX31_PIN_LD12__LD12,
+ MX31_PIN_LD13__LD13,
+ MX31_PIN_LD14__LD14,
+ MX31_PIN_LD15__LD15,
+ MX31_PIN_LD16__LD16,
+ MX31_PIN_LD17__LD17,
+ MX31_PIN_VSYNC3__VSYNC3,
+ MX31_PIN_HSYNC__HSYNC,
+ MX31_PIN_FPSHIFT__FPSHIFT,
+ MX31_PIN_DRDY0__DRDY0,
+ MX31_PIN_D3_REV__D3_REV,
+ MX31_PIN_CONTRAST__CONTRAST,
+ MX31_PIN_D3_SPL__D3_SPL,
+ MX31_PIN_D3_CLS__D3_CLS,
+ MX31_PIN_LCS0__GPI03_23,
+};
+
static struct physmap_flash_data pcm037_flash_data = {
.width = 2,
};
@@ -56,6 +132,54 @@ static struct resource pcm037_flash_resource = {
.flags = IORESOURCE_MEM,
};
+static int usbotg_pins[] = {
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+ MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+ MX31_PIN_USBOTG_STP__USBOTG_STP,
+};
+
+/* USB OTG HS port */
+static int __init gpio_usbotg_hs_activate(void)
+{
+ int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
+ ARRAY_SIZE(usbotg_pins), "usbotg");
+
+ if (ret < 0) {
+ printk(KERN_ERR "Cannot set up OTG pins\n");
+ return ret;
+ }
+
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+ return 0;
+}
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
static struct platform_device pcm037_flash = {
.name = "physmap-flash",
.id = 0,
@@ -127,26 +251,8 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
};
#ifdef CONFIG_I2C_IMX
-static int i2c_1_pins[] = {
- MX31_PIN_CSPI2_MOSI__SCL,
- MX31_PIN_CSPI2_MISO__SDA,
-};
-
-static int pcm037_i2c_1_init(struct device *dev)
-{
- return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins),
- "i2c-1");
-}
-
-static void pcm037_i2c_1_exit(struct device *dev)
-{
- mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins));
-}
-
static struct imxi2c_platform_data pcm037_i2c_1_data = {
.bitrate = 100000,
- .init = pcm037_i2c_1_init,
- .exit = pcm037_i2c_1_exit,
};
static struct at24_platform_data board_eeprom = {
@@ -166,48 +272,119 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
};
#endif
-static int sdhc1_pins[] = {
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
-};
+/* Not connected by default */
+#ifdef PCM970_SDHC_RW_SWITCH
+static int pcm970_sdhc1_get_ro(struct device *dev)
+{
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+}
+#endif
+
+#define SDHC1_GPIO_WP IOMUX_TO_GPIO(MX31_PIN_SFS6)
+#define SDHC1_GPIO_DET IOMUX_TO_GPIO(MX31_PIN_SCK6)
-static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data)
+static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
{
- return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins),
- "sdhc-1");
+ int ret;
+
+ ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC1_GPIO_DET);
+
+#ifdef PCM970_SDHC_RW_SWITCH
+ ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC1_GPIO_WP);
+#endif
+
+ ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "sdhc-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+#ifdef PCM970_SDHC_RW_SWITCH
+ gpio_free(SDHC1_GPIO_WP);
+err_gpio_free:
+#endif
+ gpio_free(SDHC1_GPIO_DET);
+
+ return ret;
}
static void pcm970_sdhc1_exit(struct device *dev, void *data)
{
- mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins));
+ free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
+ gpio_free(SDHC1_GPIO_DET);
+ gpio_free(SDHC1_GPIO_WP);
}
-/* No card and rw detection at the moment */
static struct imxmmc_platform_data sdhc_pdata = {
+#ifdef PCM970_SDHC_RW_SWITCH
+ .get_ro = pcm970_sdhc1_get_ro,
+#endif
.init = pcm970_sdhc1_init,
.exit = pcm970_sdhc1_exit,
};
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
- &pcm037_eth,
&pcm037_sram_device,
};
-static int uart0_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
+static struct ipu_platform_data mx3_ipu_data = {
+ .irq_base = MXC_IPU_IRQ_START,
};
-static int uart2_pins[] = {
- MX31_PIN_CSPI3_MOSI__RXD3,
- MX31_PIN_CSPI3_MISO__TXD3
+static const struct fb_videomode fb_modedb[] = {
+ {
+ /* 240x320 @ 60 Hz Sharp */
+ .name = "Sharp-LQ035Q7DH06-QVGA",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+ FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 240x320 @ 60 Hz */
+ .name = "TX090",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 7,
+ .lower_margin = 40,
+ .hsync_len = 96,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "Sharp-LQ035Q7DH06-QVGA",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
};
/*
@@ -215,21 +392,28 @@ static int uart2_pins[] = {
*/
static void __init mxc_board_init(void)
{
+ int ret;
+
+ mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
+ "pcm037");
+
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
- mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
mxc_register_device(&mxc_uart_device2, &uart_pdata);
- mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
mxc_register_device(&mxc_w1_master_device, NULL);
/* LAN9217 IRQ pin */
- if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
- "pcm037-eth"))
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
+ if (ret)
+ pr_warning("could not get LAN irq gpio\n");
+ else {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+ platform_device_register(&pcm037_eth);
+ }
+
#ifdef CONFIG_I2C_IMX
i2c_register_board_info(1, pcm037_i2c_devices,
@@ -239,6 +423,10 @@ static void __init mxc_board_init(void)
#endif
mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+ mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+ mxc_register_device(&mx3_fb, &mx3fb_pdata);
+ if (!gpio_usbotg_hs_activate())
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
static void __init pcm037_timer_init(void)
@@ -255,7 +443,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx31_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &pcm037_timer,
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
new file mode 100644
index 0000000..8d27c32
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smc911x.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+#include <mach/i2c.h>
+#endif
+#include <mach/iomux-mx35.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include "devices.h"
+
+static const struct fb_videomode fb_modedb[] = {
+ {
+ /* 240x320 @ 60 Hz */
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 240x320 @ 60 Hz */
+ .name = "TX090",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 7,
+ .lower_margin = 40,
+ .hsync_len = 96,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "Sharp-LQ035Q7",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
+};
+
+static struct physmap_flash_data pcm043_flash_data = {
+ .width = 2,
+};
+
+static struct resource pcm043_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm043_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm043_flash_data,
+ },
+ .resource = &pcm043_flash_resource,
+ .num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+static struct imxi2c_platform_data pcm043_i2c_1_data = {
+ .bitrate = 50000,
+};
+
+static struct at24_platform_data board_eeprom = {
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm043_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+ .platform_data = &board_eeprom,
+ }, {
+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+ .type = "pcf8563",
+ }
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+ &pcm043_flash,
+ &mxc_fec_device,
+};
+
+static struct pad_desc pcm043_pads[] = {
+ /* UART1 */
+ MX35_PAD_CTS1__UART1_CTS,
+ MX35_PAD_RTS1__UART1_RTS,
+ MX35_PAD_TXD1__UART1_TXD_MUX,
+ MX35_PAD_RXD1__UART1_RXD_MUX,
+ /* UART2 */
+ MX35_PAD_CTS2__UART2_CTS,
+ MX35_PAD_RTS2__UART2_RTS,
+ MX35_PAD_TXD2__UART2_TXD_MUX,
+ MX35_PAD_RXD2__UART2_RXD_MUX,
+ /* FEC */
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX35_PAD_FEC_COL__FEC_COL,
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX35_PAD_FEC_MDC__FEC_MDC,
+ MX35_PAD_FEC_MDIO__FEC_MDIO,
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+ MX35_PAD_FEC_CRS__FEC_CRS,
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+ /* I2C1 */
+ MX35_PAD_I2C1_CLK__I2C1_SCL,
+ MX35_PAD_I2C1_DAT__I2C1_SDA,
+ /* Display */
+ MX35_PAD_LD0__IPU_DISPB_DAT_0,
+ MX35_PAD_LD1__IPU_DISPB_DAT_1,
+ MX35_PAD_LD2__IPU_DISPB_DAT_2,
+ MX35_PAD_LD3__IPU_DISPB_DAT_3,
+ MX35_PAD_LD4__IPU_DISPB_DAT_4,
+ MX35_PAD_LD5__IPU_DISPB_DAT_5,
+ MX35_PAD_LD6__IPU_DISPB_DAT_6,
+ MX35_PAD_LD7__IPU_DISPB_DAT_7,
+ MX35_PAD_LD8__IPU_DISPB_DAT_8,
+ MX35_PAD_LD9__IPU_DISPB_DAT_9,
+ MX35_PAD_LD10__IPU_DISPB_DAT_10,
+ MX35_PAD_LD11__IPU_DISPB_DAT_11,
+ MX35_PAD_LD12__IPU_DISPB_DAT_12,
+ MX35_PAD_LD13__IPU_DISPB_DAT_13,
+ MX35_PAD_LD14__IPU_DISPB_DAT_14,
+ MX35_PAD_LD15__IPU_DISPB_DAT_15,
+ MX35_PAD_LD16__IPU_DISPB_DAT_16,
+ MX35_PAD_LD17__IPU_DISPB_DAT_17,
+ MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+ MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+ MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+ MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+ MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+ MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
+ MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
+ MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+ i2c_register_board_info(0, pcm043_i2c_devices,
+ ARRAY_SIZE(pcm043_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+#endif
+
+ mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+ mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init pcm043_timer_init(void)
+{
+ mx35_clocks_init();
+}
+
+struct sys_timer pcm043_timer = {
+ .init = pcm043_timer_init,
+};
+
+MACHINE_START(PCM043, "Phytec Phycore pcm043")
+ /* Maintainer: Pengutronix */
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx35_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &pcm043_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 5a01e48..82b31c4 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -279,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx31_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &qong_timer,
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index 79df60c..43da8bb 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -168,7 +168,7 @@ void __init netx_init_irq(void)
{
int irq;
- vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0);
+ vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0, 0);
for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
set_irq_chip(irq, &netx_hif_chip);
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index cd8de89..55ecc01 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -46,7 +46,6 @@ config MACH_OMAP_H2
config MACH_OMAP_H3
bool "TI H3 Support"
depends on ARCH_OMAP1 && ARCH_OMAP16XX
-# select GPIOEXPANDER_OMAP
help
TI OMAP 1710 H3 board support. Say Y here if you have such
a board.
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 1bda8f5..6867cd3 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -13,6 +13,10 @@ obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o
+# DSP
+obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
+mailbox_mach-objs := mailbox.o
+
led-y := leds.o
# Specific board support
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index d1ed136..e70fc7c 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -33,8 +33,11 @@
#include <mach/common.h>
#include <mach/dsp_common.h>
#include <mach/omapfb.h>
+#include <mach/hwa742.h>
#include <mach/lcd_mipid.h>
#include <mach/mmc.h>
+#include <mach/usb.h>
+#include <mach/clock.h>
#define ADS7846_PENDOWN_GPIO 15
@@ -162,6 +165,15 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = {
},
};
+static struct hwa742_platform_data nokia770_hwa742_platform_data = {
+ .te_connected = 1,
+};
+
+static void hwa742_dev_init(void)
+{
+ clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL);
+ omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data);
+}
/* assume no Mini-AB port */
@@ -370,6 +382,7 @@ static void __init omap_nokia770_init(void)
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
omap_dsp_init();
+ hwa742_dev_init();
ads7846_dev_init();
mipid_dev_init();
omap_usb_init(&nokia770_usb_config);
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 336e51d..436eed2 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -776,7 +776,7 @@ int __init omap1_clk_init(void)
arm_idlect1_mask = ~0;
for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
- clk_init_one(c->lk.clk);
+ clk_preinit(c->lk.clk);
cpu_mask = 0;
if (cpu_is_omap16xx())
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 9774c1f..5218943 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -53,11 +53,12 @@
#include <mach/clock.h>
#include <mach/sram.h>
#include <mach/tc.h>
-#include <mach/pm.h>
#include <mach/mux.h>
#include <mach/dma.h>
#include <mach/dmtimer.h>
+#include "pm.h"
+
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
@@ -101,7 +102,7 @@ static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
* going idle we continue to do idle even if we get
* a clock tick interrupt . .
*/
-void omap_pm_idle(void)
+void omap1_pm_idle(void)
{
extern __u32 arm_idlect1_mask;
__u32 use_idlect1 = arm_idlect1_mask;
@@ -222,7 +223,7 @@ static void omap_pm_wakeup_setup(void)
#define EN_APICK 6 /* ARM_IDLECT2 */
#define DSP_EN 1 /* ARM_RSTCT1 */
-void omap_pm_suspend(void)
+void omap1_pm_suspend(void)
{
unsigned long arg0 = 0, arg1 = 0;
@@ -610,7 +611,7 @@ static int omap_pm_enter(suspend_state_t state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
- omap_pm_suspend();
+ omap1_pm_suspend();
break;
default:
return -EINVAL;
@@ -683,7 +684,7 @@ static int __init omap_pm_init(void)
return -ENODEV;
}
- pm_idle = omap_pm_idle;
+ pm_idle = omap1_pm_idle;
if (cpu_is_omap730())
setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/mach-omap1/pm.h
index ce6ee79..9ed5e2c 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -1,7 +1,7 @@
/*
- * arch/arm/plat-omap/include/mach/pm.h
+ * arch/arm/mach-omap1/pm.h
*
- * Header file for OMAP Power Management Routines
+ * Header file for OMAP1 Power Management Routines
*
* Author: MontaVista Software, Inc.
* support@mvista.com
@@ -31,8 +31,8 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef __ASM_ARCH_OMAP_PM_H
-#define __ASM_ARCH_OMAP_PM_H
+#ifndef __ARCH_ARM_MACH_OMAP1_PM_H
+#define __ARCH_ARM_MACH_OMAP1_PM_H
/*
* ----------------------------------------------------------------------------
@@ -106,8 +106,7 @@
#if !defined(CONFIG_ARCH_OMAP730) && \
!defined(CONFIG_ARCH_OMAP15XX) && \
- !defined(CONFIG_ARCH_OMAP16XX) && \
- !defined(CONFIG_ARCH_OMAP24XX)
+ !defined(CONFIG_ARCH_OMAP16XX)
#warning "Power management for this processor not implemented yet"
#endif
@@ -115,29 +114,27 @@
#include <linux/clk.h>
+extern struct kset power_subsys;
+
extern void prevent_idle_sleep(void);
extern void allow_idle_sleep(void);
-extern void omap_pm_idle(void);
-extern void omap_pm_suspend(void);
+extern void omap1_pm_idle(void);
+extern void omap1_pm_suspend(void);
+
extern void omap730_cpu_suspend(unsigned short, unsigned short);
extern void omap1510_cpu_suspend(unsigned short, unsigned short);
extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
- void __iomem *sdrc_power);
extern void omap730_idle_loop_suspend(void);
extern void omap1510_idle_loop_suspend(void);
extern void omap1610_idle_loop_suspend(void);
-extern void omap24xx_idle_loop_suspend(void);
extern unsigned int omap730_cpu_suspend_sz;
extern unsigned int omap1510_cpu_suspend_sz;
extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap24xx_cpu_suspend_sz;
extern unsigned int omap730_idle_loop_suspend_sz;
extern unsigned int omap1510_idle_loop_suspend_sz;
extern unsigned int omap1610_idle_loop_suspend_sz;
-extern unsigned int omap24xx_idle_loop_suspend_sz;
#ifdef CONFIG_OMAP_SERIAL_WAKE
extern void omap_serial_wake_trigger(int enable);
@@ -170,10 +167,6 @@ extern void omap_serial_wake_trigger(int enable);
#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
-#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
-#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-
/*
* List of global OMAP registers to preserve.
* More ones like CP and general purpose register values are preserved
@@ -283,63 +276,5 @@ enum mpui1610_save_state {
#endif
};
-enum omap24xx_save_state {
- OMAP24XX_SLEEP_SAVE_START = 0,
- OMAP24XX_SLEEP_SAVE_INTC_MIR0,
- OMAP24XX_SLEEP_SAVE_INTC_MIR1,
- OMAP24XX_SLEEP_SAVE_INTC_MIR2,
-
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
-
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
- OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO3_OE,
- OMAP24XX_SLEEP_SAVE_GPIO4_OE,
- OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
- OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
- OMAP24XX_SLEEP_SAVE_SIZE
-};
-
#endif /* ASSEMBLER */
#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 842090b..f754cee 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -26,9 +26,6 @@
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/fpga.h>
-#ifdef CONFIG_PM
-#include <mach/pm.h>
-#endif
static struct clk * uart1_ck;
static struct clk * uart2_ck;
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index f3eac93..22e8568 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -35,7 +35,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
-#include <mach/pm.h>
+#include "pm.h"
.text
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 64ab386..a755eb5 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -25,7 +25,7 @@ config ARCH_OMAP3430
select ARCH_OMAP_OTG
comment "OMAP Board Type"
- depends on ARCH_OMAP2 || ARCH_OMAP3
+ depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
@@ -56,6 +56,10 @@ config MACH_OVERO
bool "Gumstix Overo board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+config MACH_OMAP3EVM
+ bool "OMAP 3530 EVM board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
config MACH_OMAP3_PANDORA
bool "OMAP3 Pandora"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
@@ -67,3 +71,11 @@ config MACH_OMAP_3430SDP
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_ZOOM2
+ bool "OMAP3 Zoom2 board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_4430SDP
+ bool "OMAP 4430 SDP board"
+ depends on ARCH_OMAP4
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index c49d9bf..735bae5 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,12 +3,21 @@
#
# Common support
-obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \
- devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
- clockdomain.o
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
+
+omap-2-3-common = irq.o sdrc.o
+prcm-common = prcm.o powerdomain.o
+clock-common = clock.o clockdomain.o
+
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+# SMP support ONLY available for OMAP4
+obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
+
# Functions loaded to SRAM
obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
@@ -20,14 +29,21 @@ obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# Power Management
ifeq ($(CONFIG_PM),y)
-obj-y += pm.o
+obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
+obj-$(CONFIG_PM_DEBUG) += pm-debug.o
endif
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o
+iommu-y += iommu2.o
+iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o
+
+obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y)
+
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
@@ -40,6 +56,8 @@ obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o \
mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
+ mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
@@ -48,8 +66,17 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
board-rx51-peripherals.o \
mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \
+ mmc-twl4030.o \
+ board-zoom-debugboard.o
+
+obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
# Platform specific device init code
-ifeq ($(CONFIG_USB_MUSB_SOC),y)
obj-y += usb-musb.o
-endif
+
+onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
+obj-y += $(onenand-m) $(onenand-y)
+
+smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
+obj-y += $(smc91x-m) $(smc91x-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 2214365..9c3fdcd 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -36,14 +36,12 @@
#include <mach/common.h>
#include <mach/gpmc.h>
#include <mach/usb.h>
+#include <mach/gpmc-smc91x.h>
#include "mmc-twl4030.h"
#define SDP2430_CS0_BASE 0x04000000
-#define SDP2430_FLASH_CS 0
-#define SDP2430_SMC91X_CS 5
-
-#define SDP2430_ETHR_GPIO_IRQ 149
+#define SECONDARY_LCD_GPIO 147
static struct mtd_partition sdp2430_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
@@ -99,100 +97,53 @@ static struct platform_device sdp2430_flash_device = {
.resource = &sdp2430_flash_resource,
};
-static struct resource sdp2430_smc91x_resources[] = {
- [0] = {
- .start = SDP2430_CS0_BASE,
- .end = SDP2430_CS0_BASE + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
- .end = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct platform_device sdp2430_smc91x_device = {
- .name = "smc91x",
+static struct platform_device sdp2430_lcd_device = {
+ .name = "sdp2430_lcd",
.id = -1,
- .num_resources = ARRAY_SIZE(sdp2430_smc91x_resources),
- .resource = sdp2430_smc91x_resources,
};
static struct platform_device *sdp2430_devices[] __initdata = {
- &sdp2430_smc91x_device,
&sdp2430_flash_device,
+ &sdp2430_lcd_device,
};
-static inline void __init sdp2430_init_smc91x(void)
-{
- int eth_cs;
- unsigned long cs_mem_base;
- unsigned int rate;
- struct clk *gpmc_fck;
+static struct omap_lcd_config sdp2430_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
- eth_cs = SDP2430_SMC91X_CS;
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
- gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
- if (IS_ERR(gpmc_fck)) {
- WARN_ON(1);
- return;
- }
+static struct omap_smc91x_platform_data board_smc91x_data = {
+ .cs = 5,
+ .gpio_irq = 149,
+ .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+ IORESOURCE_IRQ_LOWLEVEL,
- clk_enable(gpmc_fck);
- rate = clk_get_rate(gpmc_fck);
-
- /* Make sure CS1 timings are correct, for 2430 always muxed */
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
-
- if (rate >= 160000000) {
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
- } else if (rate >= 130000000) {
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
- } else { /* rate = 100000000 */
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
- }
+};
- if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
- goto out;
- }
+static void __init board_smc91x_init(void)
+{
+ if (omap_rev() > OMAP3430_REV_ES1_0)
+ board_smc91x_data.gpio_irq = 6;
+ else
+ board_smc91x_data.gpio_irq = 29;
- sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;
- sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
- udelay(100);
+ gpmc_smc91x_init(&board_smc91x_data);
+}
- if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
- printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
- SDP2430_ETHR_GPIO_IRQ);
- gpmc_cs_free(eth_cs);
- goto out;
- }
- gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);
+#else
-out:
- clk_disable(gpmc_fck);
- clk_put(gpmc_fck);
+static inline void board_smc91x_init(void)
+{
}
+#endif
+
static void __init omap_2430sdp_init_irq(void)
{
omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
- sdp2430_init_smc91x();
}
static struct omap_uart_config sdp2430_uart_config __initdata = {
@@ -201,6 +152,7 @@ static struct omap_uart_config sdp2430_uart_config __initdata = {
static struct omap_board_config_kernel sdp2430_config[] = {
{OMAP_TAG_UART, &sdp2430_uart_config},
+ {OMAP_TAG_LCD, &sdp2430_lcd_config},
};
@@ -248,6 +200,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
static void __init omap_2430sdp_init(void)
{
+ int ret;
+
omap2430_i2c_init();
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
@@ -256,6 +210,12 @@ static void __init omap_2430sdp_init(void)
omap_serial_init();
twl4030_mmc_init(mmc);
usb_musb_init();
+ board_smc91x_init();
+
+ /* Turn off secondary LCD backlight */
+ ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
+ if (ret == 0)
+ gpio_direction_output(SECONDARY_LCD_GPIO, 0);
}
static void __init omap_2430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ed92749..496a90e 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -39,15 +39,13 @@
#include <mach/control.h>
#include <mach/keypad.h>
+#include <mach/gpmc-smc91x.h>
+#include "sdram-qimonda-hyb18m512160af-6.h"
#include "mmc-twl4030.h"
#define CONFIG_DISABLE_HFCLK 1
-#define SDP3430_ETHR_GPIO_IRQ_SDPV1 29
-#define SDP3430_ETHR_GPIO_IRQ_SDPV2 6
-#define SDP3430_SMC91X_CS 3
-
#define SDP3430_TS_GPIO_IRQ_SDPV1 3
#define SDP3430_TS_GPIO_IRQ_SDPV2 2
@@ -56,24 +54,6 @@
#define TWL4030_MSECURE_GPIO 22
-static struct resource sdp3430_smc91x_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct platform_device sdp3430_smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(sdp3430_smc91x_resources),
- .resource = sdp3430_smc91x_resources,
-};
-
static int sdp3430_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
@@ -184,48 +164,14 @@ static struct regulator_consumer_supply sdp3430_vdvi_supply = {
};
static struct platform_device *sdp3430_devices[] __initdata = {
- &sdp3430_smc91x_device,
&sdp3430_lcd_device,
};
-static inline void __init sdp3430_init_smc91x(void)
-{
- int eth_cs;
- unsigned long cs_mem_base;
- int eth_gpio = 0;
-
- eth_cs = SDP3430_SMC91X_CS;
-
- if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
- return;
- }
-
- sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300;
- sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f;
- udelay(100);
-
- if (omap_rev() > OMAP3430_REV_ES1_0)
- eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2;
- else
- eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1;
-
- sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio);
-
- if (gpio_request(eth_gpio, "SMC91x irq") < 0) {
- printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
- eth_gpio);
- return;
- }
- gpio_direction_input(eth_gpio);
-}
-
static void __init omap_3430sdp_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(hyb18m512160af6_sdrc_params);
omap_init_irq();
omap_gpio_init();
- sdp3430_init_smc91x();
}
static struct omap_uart_config sdp3430_uart_config __initdata = {
@@ -506,6 +452,32 @@ static int __init omap3430_i2c_init(void)
return 0;
}
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+ .cs = 3,
+ .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+ IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+ if (omap_rev() > OMAP3430_REV_ES1_0)
+ board_smc91x_data.gpio_irq = 6;
+ else
+ board_smc91x_data.gpio_irq = 29;
+
+ gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
+
static void __init omap_3430sdp_init(void)
{
omap3430_i2c_init();
@@ -522,6 +494,7 @@ static void __init omap_3430sdp_init(void)
ads7846_dev_init();
omap_serial_init();
usb_musb_init();
+ board_smc91x_init();
}
static void __init omap_3430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
new file mode 100644
index 0000000..57e477b
--- /dev/null
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -0,0 +1,94 @@
+/*
+ * Board support file for OMAP4430 SDP.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/control.h>
+#include <mach/timer-gp.h>
+#include <asm/hardware/gic.h>
+
+static struct platform_device sdp4430_lcd_device = {
+ .name = "sdp4430_lcd",
+ .id = -1,
+};
+
+static struct platform_device *sdp4430_devices[] __initdata = {
+ &sdp4430_lcd_device,
+};
+
+static struct omap_uart_config sdp4430_uart_config __initdata = {
+ .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2),
+};
+
+static struct omap_lcd_config sdp4430_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_board_config_kernel sdp4430_config[] __initdata = {
+ { OMAP_TAG_UART, &sdp4430_uart_config },
+ { OMAP_TAG_LCD, &sdp4430_lcd_config },
+};
+
+static void __init gic_init_irq(void)
+{
+ gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+ gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+}
+
+static void __init omap_4430sdp_init_irq(void)
+{
+ omap2_init_common_hw(NULL);
+#ifdef CONFIG_OMAP_32K_TIMER
+ omap2_gp_clockevent_set_gptimer(1);
+#endif
+ gic_init_irq();
+ omap_gpio_init();
+}
+
+
+static void __init omap_4430sdp_init(void)
+{
+ platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
+ omap_board_config = sdp4430_config;
+ omap_board_config_size = ARRAY_SIZE(sdp4430_config);
+ omap_serial_init();
+}
+
+static void __init omap_4430sdp_map_io(void)
+{
+ omap2_set_globals_443x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
+ /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_4430sdp_map_io,
+ .init_irq = omap_4430sdp_init_irq,
+ .init_machine = omap_4430sdp_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index da57b0f..d8bc0a7 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -16,11 +16,13 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <linux/workqueue.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
@@ -39,6 +41,7 @@
#include <asm/delay.h>
#include <mach/control.h>
#include <mach/usb.h>
+#include <mach/keypad.h>
#include "mmc-twl4030.h"
@@ -77,8 +80,163 @@ static struct platform_device ldp_smsc911x_device = {
},
};
-static struct platform_device *ldp_devices[] __initdata = {
- &ldp_smsc911x_device,
+static int ldp_twl4030_keymap[] = {
+ KEY(0, 0, KEY_1),
+ KEY(1, 0, KEY_2),
+ KEY(2, 0, KEY_3),
+ KEY(0, 1, KEY_4),
+ KEY(1, 1, KEY_5),
+ KEY(2, 1, KEY_6),
+ KEY(3, 1, KEY_F5),
+ KEY(0, 2, KEY_7),
+ KEY(1, 2, KEY_8),
+ KEY(2, 2, KEY_9),
+ KEY(3, 2, KEY_F6),
+ KEY(0, 3, KEY_F7),
+ KEY(1, 3, KEY_0),
+ KEY(2, 3, KEY_F8),
+ PERSISTENT_KEY(4, 5),
+ KEY(4, 4, KEY_VOLUMEUP),
+ KEY(5, 5, KEY_VOLUMEDOWN),
+ 0
+};
+
+static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+ .rows = 6,
+ .cols = 6,
+ .keymap = ldp_twl4030_keymap,
+ .keymapsize = ARRAY_SIZE(ldp_twl4030_keymap),
+ .rep = 1,
+};
+
+static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
+ [0] = {
+ .code = KEY_ENTER,
+ .gpio = 101,
+ .desc = "enter sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [1] = {
+ .code = KEY_F1,
+ .gpio = 102,
+ .desc = "func 1",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [2] = {
+ .code = KEY_F2,
+ .gpio = 103,
+ .desc = "func 2",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [3] = {
+ .code = KEY_F3,
+ .gpio = 104,
+ .desc = "func 3",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [4] = {
+ .code = KEY_F4,
+ .gpio = 105,
+ .desc = "func 4",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [5] = {
+ .code = KEY_LEFT,
+ .gpio = 106,
+ .desc = "left sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [6] = {
+ .code = KEY_RIGHT,
+ .gpio = 107,
+ .desc = "right sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [7] = {
+ .code = KEY_UP,
+ .gpio = 108,
+ .desc = "up sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [8] = {
+ .code = KEY_DOWN,
+ .gpio = 109,
+ .desc = "down sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+};
+
+static struct gpio_keys_platform_data ldp_gpio_keys = {
+ .buttons = ldp_gpio_keys_buttons,
+ .nbuttons = ARRAY_SIZE(ldp_gpio_keys_buttons),
+ .rep = 1,
+};
+
+static struct platform_device ldp_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &ldp_gpio_keys,
+ },
+};
+
+static int ts_gpio;
+
+/**
+ * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
+ *
+ * @return - void. If request gpio fails then Flag KERN_ERR.
+ */
+static void ads7846_dev_init(void)
+{
+ if (gpio_request(ts_gpio, "ads7846 irq") < 0) {
+ printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+ return;
+ }
+
+ gpio_direction_input(ts_gpio);
+ omap_set_gpio_debounce(ts_gpio, 1);
+ omap_set_gpio_debounce_time(ts_gpio, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(ts_gpio);
+}
+
+static struct ads7846_platform_data tsc2046_config __initdata = {
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+};
+
+static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static struct spi_board_info ldp_spi_board_info[] __initdata = {
+ [0] = {
+ /*
+ * TSC2046 operates at a max freqency of 2MHz, so
+ * operate slightly below at 1.5MHz
+ */
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &tsc2046_mcspi_config,
+ .irq = 0,
+ .platform_data = &tsc2046_config,
+ },
};
static inline void __init ldp_init_smsc911x(void)
@@ -122,8 +280,22 @@ static struct omap_uart_config ldp_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+static struct platform_device ldp_lcd_device = {
+ .name = "ldp_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config ldp_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
static struct omap_board_config_kernel ldp_config[] __initdata = {
{ OMAP_TAG_UART, &ldp_uart_config },
+ { OMAP_TAG_LCD, &ldp_lcd_config },
+};
+
+static struct twl4030_usb_data ldp_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_gpio_platform_data ldp_gpio_data = {
@@ -132,12 +304,39 @@ static struct twl4030_gpio_platform_data ldp_gpio_data = {
.irq_end = TWL4030_GPIO_IRQ_END,
};
+static struct twl4030_madc_platform_data ldp_madc_data = {
+ .irq_line = 1,
+};
+
+static struct regulator_consumer_supply ldp_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data ldp_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &ldp_vmmc1_supply,
+};
+
static struct twl4030_platform_data ldp_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
+ .madc = &ldp_madc_data,
+ .usb = &ldp_usb_data,
+ .vmmc1 = &ldp_vmmc1,
.gpio = &ldp_gpio_data,
+ .keypad = &ldp_kp_twl4030_data,
};
static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
@@ -168,15 +367,29 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
{} /* Terminator */
};
+static struct platform_device *ldp_devices[] __initdata = {
+ &ldp_smsc911x_device,
+ &ldp_lcd_device,
+ &ldp_gpio_keys_device,
+};
+
static void __init omap_ldp_init(void)
{
omap_i2c_init();
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
omap_board_config = ldp_config;
omap_board_config_size = ARRAY_SIZE(ldp_config);
+ ts_gpio = 54;
+ ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
+ spi_register_board_info(ldp_spi_board_info,
+ ARRAY_SIZE(ldp_spi_board_info));
+ ads7846_dev_init();
omap_serial_init();
- twl4030_mmc_init(mmc);
usb_musb_init();
+
+ twl4030_mmc_init(mmc);
+ /* link regulators to MMC adapters */
+ ldp_vmmc1_supply.dev = mmc[0].dev;
}
static void __init omap_ldp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3a7a29d..991ac9c 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -28,6 +28,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
+#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
#include <mach/hardware.h>
@@ -105,6 +106,8 @@ static struct platform_device omap3beagle_nand_device = {
.resource = &omap3beagle_nand_resource,
};
+#include "sdram-micron-mt46h32m32lf-6.h"
+
static struct omap_uart_config omap3_beagle_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
@@ -118,6 +121,23 @@ static struct twl4030_hsmmc_info mmc[] = {
{} /* Terminator */
};
+static struct platform_device omap3_beagle_lcd_device = {
+ .name = "omap3beagle_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct regulator_consumer_supply beagle_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply beagle_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
static struct gpio_led gpio_leds[];
static int beagle_twl_gpio_setup(struct device *dev,
@@ -128,6 +148,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
+ /* link regulators to MMC adapters */
+ beagle_vmmc1_supply.dev = mmc[0].dev;
+ beagle_vsim_supply.dev = mmc[0].dev;
+
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
@@ -156,12 +180,85 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
.setup = beagle_twl_gpio_setup,
};
+static struct regulator_consumer_supply beagle_vdac_supply = {
+ .supply = "vdac",
+ .dev = &omap3_beagle_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply beagle_vdvi_supply = {
+ .supply = "vdvi",
+ .dev = &omap3_beagle_lcd_device.dev,
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data beagle_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data beagle_vsim = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data beagle_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data beagle_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vdvi_supply,
+};
+
static struct twl4030_platform_data beagle_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.gpio = &beagle_gpio_data,
+ .vmmc1 = &beagle_vmmc1,
+ .vsim = &beagle_vsim,
+ .vdac = &beagle_vdac,
+ .vpll2 = &beagle_vpll2,
};
static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
@@ -185,7 +282,7 @@ static int __init omap3_beagle_i2c_init(void)
static void __init omap3_beagle_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
@@ -193,15 +290,6 @@ static void __init omap3_beagle_init_irq(void)
omap_gpio_init();
}
-static struct platform_device omap3_beagle_lcd_device = {
- .name = "omap3beagle_lcd",
- .id = -1,
-};
-
-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
static struct gpio_led gpio_leds[] = {
{
.name = "beagleboard::usr0",
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
new file mode 100644
index 0000000..d3cc145
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -0,0 +1,329 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3evm.c
+ *
+ * Copyright (C) 2008 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/common.h>
+#include <mach/mcspi.h>
+#include <mach/keypad.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mmc-twl4030.h"
+
+#define OMAP3_EVM_TS_GPIO 175
+
+#define OMAP3EVM_ETHR_START 0x2c000000
+#define OMAP3EVM_ETHR_SIZE 1024
+#define OMAP3EVM_ETHR_GPIO_IRQ 176
+#define OMAP3EVM_SMC911X_CS 5
+
+static struct resource omap3evm_smc911x_resources[] = {
+ [0] = {
+ .start = OMAP3EVM_ETHR_START,
+ .end = (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+ .end = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device omap3evm_smc911x_device = {
+ .name = "smc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap3evm_smc911x_resources),
+ .resource = &omap3evm_smc911x_resources[0],
+};
+
+static inline void __init omap3evm_init_smc911x(void)
+{
+ int eth_cs;
+ struct clk *l3ck;
+ unsigned int rate;
+
+ eth_cs = OMAP3EVM_SMC911X_CS;
+
+ l3ck = clk_get(NULL, "l3_ck");
+ if (IS_ERR(l3ck))
+ rate = 100000000;
+ else
+ rate = clk_get_rate(l3ck);
+
+ if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+ OMAP3EVM_ETHR_GPIO_IRQ);
+ return;
+ }
+
+ gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
+}
+
+static struct omap_uart_config omap3_evm_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = 63,
+ },
+ {} /* Terminator */
+};
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "omap3evm::ledb",
+ /* normally not visible (board underside) */
+ .default_trigger = "default-on",
+ .gpio = -EINVAL, /* gets replaced */
+ .active_low = true,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+
+static int omap3evm_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
+ omap_cfg_reg(L8_34XX_GPIO63);
+ mmc[0].gpio_cd = gpio + 0;
+ twl4030_mmc_init(mmc);
+
+ /*
+ * Most GPIOs are for USB OTG. Some are mostly sent to
+ * the P2 connector; notably LEDA for the LCD backlight.
+ */
+
+ /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
+ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+ platform_device_register(&leds_gpio);
+
+ return 0;
+}
+
+static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .use_leds = true,
+ .setup = omap3evm_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data omap3evm_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static int omap3evm_keymap[] = {
+ KEY(0, 0, KEY_LEFT),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_A),
+ KEY(0, 3, KEY_B),
+ KEY(1, 0, KEY_DOWN),
+ KEY(1, 1, KEY_UP),
+ KEY(1, 2, KEY_E),
+ KEY(1, 3, KEY_F),
+ KEY(2, 0, KEY_ENTER),
+ KEY(2, 1, KEY_I),
+ KEY(2, 2, KEY_J),
+ KEY(2, 3, KEY_K),
+ KEY(3, 0, KEY_M),
+ KEY(3, 1, KEY_N),
+ KEY(3, 2, KEY_O),
+ KEY(3, 3, KEY_P)
+};
+
+static struct twl4030_keypad_data omap3evm_kp_data = {
+ .rows = 4,
+ .cols = 4,
+ .keymap = omap3evm_keymap,
+ .keymapsize = ARRAY_SIZE(omap3evm_keymap),
+ .rep = 1,
+};
+
+static struct twl4030_madc_platform_data omap3evm_madc_data = {
+ .irq_line = 1,
+};
+
+static struct twl4030_platform_data omap3evm_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .keypad = &omap3evm_kp_data,
+ .madc = &omap3evm_madc_data,
+ .usb = &omap3evm_usb_data,
+ .gpio = &omap3evm_gpio_data,
+};
+
+static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &omap3evm_twldata,
+ },
+};
+
+static int __init omap3_evm_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
+ ARRAY_SIZE(omap3evm_i2c_boardinfo));
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static struct platform_device omap3_evm_lcd_device = {
+ .name = "omap3evm_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static void ads7846_dev_init(void)
+{
+ if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
+ printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+
+ gpio_direction_input(OMAP3_EVM_TS_GPIO);
+
+ omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1);
+ omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(OMAP3_EVM_TS_GPIO);
+}
+
+struct ads7846_platform_data ads7846_config = {
+ .x_max = 0x0fff,
+ .y_max = 0x0fff,
+ .x_plate_ohms = 180,
+ .pressure_max = 255,
+ .debounce_max = 10,
+ .debounce_tol = 3,
+ .debounce_rep = 1,
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+ .settle_delay_usecs = 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+struct spi_board_info omap3evm_spi_board_info[] = {
+ [0] = {
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO),
+ .platform_data = &ads7846_config,
+ },
+};
+
+static void __init omap3_evm_init_irq(void)
+{
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap_init_irq();
+ omap_gpio_init();
+ omap3evm_init_smc911x();
+}
+
+static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+ { OMAP_TAG_UART, &omap3_evm_uart_config },
+ { OMAP_TAG_LCD, &omap3_evm_lcd_config },
+};
+
+static struct platform_device *omap3_evm_devices[] __initdata = {
+ &omap3_evm_lcd_device,
+ &omap3evm_smc911x_device,
+};
+
+static void __init omap3_evm_init(void)
+{
+ omap3_evm_i2c_init();
+
+ platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
+ omap_board_config = omap3_evm_config;
+ omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
+
+ spi_register_board_info(omap3evm_spi_board_info,
+ ARRAY_SIZE(omap3evm_spi_board_info));
+
+ omap_serial_init();
+ usb_musb_init();
+ ads7846_dev_init();
+}
+
+static void __init omap3_evm_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3EVM, "OMAP3 EVM")
+ /* Maintainer: Syed Mohammed Khasim - Texas Instruments */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap3_evm_map_io,
+ .init_irq = omap3_evm_init_irq,
+ .init_machine = omap3_evm_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 402f09c..e32aa23 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -23,7 +23,11 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -35,11 +39,154 @@
#include <mach/hardware.h>
#include <mach/mcspi.h>
#include <mach/usb.h>
+#include <mach/keypad.h>
+#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
#define OMAP3_PANDORA_TS_GPIO 94
+/* hardware debounce: (value + 1) * 31us */
+#define GPIO_DEBOUNCE_TIME 127
+
+static struct gpio_led pandora_gpio_leds[] = {
+ {
+ .name = "pandora::sd1",
+ .default_trigger = "mmc0",
+ .gpio = 128,
+ }, {
+ .name = "pandora::sd2",
+ .default_trigger = "mmc1",
+ .gpio = 129,
+ }, {
+ .name = "pandora::bluetooth",
+ .gpio = 158,
+ }, {
+ .name = "pandora::wifi",
+ .gpio = 159,
+ },
+};
+
+static struct gpio_led_platform_data pandora_gpio_led_data = {
+ .leds = pandora_gpio_leds,
+ .num_leds = ARRAY_SIZE(pandora_gpio_leds),
+};
+
+static struct platform_device pandora_leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &pandora_gpio_led_data,
+ },
+};
+
+#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \
+{ \
+ .gpio = gpio_num, \
+ .type = ev_type, \
+ .code = ev_code, \
+ .active_low = act_low, \
+ .desc = "btn " descr, \
+}
+
+#define GPIO_BUTTON_LOW(gpio_num, event_code, description) \
+ GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description)
+
+static struct gpio_keys_button pandora_gpio_keys[] = {
+ GPIO_BUTTON_LOW(110, KEY_UP, "up"),
+ GPIO_BUTTON_LOW(103, KEY_DOWN, "down"),
+ GPIO_BUTTON_LOW(96, KEY_LEFT, "left"),
+ GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"),
+ GPIO_BUTTON_LOW(111, BTN_A, "a"),
+ GPIO_BUTTON_LOW(106, BTN_B, "b"),
+ GPIO_BUTTON_LOW(109, BTN_X, "x"),
+ GPIO_BUTTON_LOW(101, BTN_Y, "y"),
+ GPIO_BUTTON_LOW(102, BTN_TL, "l"),
+ GPIO_BUTTON_LOW(97, BTN_TL2, "l2"),
+ GPIO_BUTTON_LOW(105, BTN_TR, "r"),
+ GPIO_BUTTON_LOW(107, BTN_TR2, "r2"),
+ GPIO_BUTTON_LOW(104, KEY_LEFTCTRL, "ctrl"),
+ GPIO_BUTTON_LOW(99, KEY_MENU, "menu"),
+ GPIO_BUTTON_LOW(176, KEY_COFFEE, "hold"),
+ GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"),
+ GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"),
+};
+
+static struct gpio_keys_platform_data pandora_gpio_key_info = {
+ .buttons = pandora_gpio_keys,
+ .nbuttons = ARRAY_SIZE(pandora_gpio_keys),
+};
+
+static struct platform_device pandora_keys_gpio = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &pandora_gpio_key_info,
+ },
+};
+
+static void __init pandora_keys_gpio_init(void)
+{
+ /* set debounce time for GPIO banks 4 and 6 */
+ omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME);
+ omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
+}
+
+static int pandora_keypad_map[] = {
+ /* col, row, code */
+ KEY(0, 0, KEY_9),
+ KEY(0, 1, KEY_0),
+ KEY(0, 2, KEY_BACKSPACE),
+ KEY(0, 3, KEY_O),
+ KEY(0, 4, KEY_P),
+ KEY(0, 5, KEY_K),
+ KEY(0, 6, KEY_L),
+ KEY(0, 7, KEY_ENTER),
+ KEY(1, 0, KEY_8),
+ KEY(1, 1, KEY_7),
+ KEY(1, 2, KEY_6),
+ KEY(1, 3, KEY_5),
+ KEY(1, 4, KEY_4),
+ KEY(1, 5, KEY_3),
+ KEY(1, 6, KEY_2),
+ KEY(1, 7, KEY_1),
+ KEY(2, 0, KEY_I),
+ KEY(2, 1, KEY_U),
+ KEY(2, 2, KEY_Y),
+ KEY(2, 3, KEY_T),
+ KEY(2, 4, KEY_R),
+ KEY(2, 5, KEY_E),
+ KEY(2, 6, KEY_W),
+ KEY(2, 7, KEY_Q),
+ KEY(3, 0, KEY_J),
+ KEY(3, 1, KEY_H),
+ KEY(3, 2, KEY_G),
+ KEY(3, 3, KEY_F),
+ KEY(3, 4, KEY_D),
+ KEY(3, 5, KEY_S),
+ KEY(3, 6, KEY_A),
+ KEY(3, 7, KEY_LEFTSHIFT),
+ KEY(4, 0, KEY_N),
+ KEY(4, 1, KEY_B),
+ KEY(4, 2, KEY_V),
+ KEY(4, 3, KEY_C),
+ KEY(4, 4, KEY_X),
+ KEY(4, 5, KEY_Z),
+ KEY(4, 6, KEY_DOT),
+ KEY(4, 7, KEY_COMMA),
+ KEY(5, 0, KEY_M),
+ KEY(5, 1, KEY_SPACE),
+ KEY(5, 2, KEY_FN),
+};
+
+static struct twl4030_keypad_data pandora_kp_data = {
+ .rows = 8,
+ .cols = 6,
+ .keymap = pandora_keypad_map,
+ .keymapsize = ARRAY_SIZE(pandora_keypad_map),
+ .rep = 1,
+};
+
static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
@@ -69,6 +216,14 @@ static struct omap_uart_config omap3pandora_uart_config __initdata = {
.enabled_uarts = (1 << 2), /* UART3 */
};
+static struct regulator_consumer_supply pandora_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply pandora_vmmc2_supply = {
+ .supply = "vmmc",
+};
+
static int omap3pandora_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
@@ -77,6 +232,10 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
omap3pandora_mmc[1].gpio_cd = gpio + 1;
twl4030_mmc_init(omap3pandora_mmc);
+ /* link regulators to MMC adapters */
+ pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev;
+ pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev;
+
return 0;
}
@@ -87,6 +246,36 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
.setup = omap3pandora_twl_gpio_setup,
};
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data pandora_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
+static struct regulator_init_data pandora_vmmc2 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_vmmc2_supply,
+};
+
static struct twl4030_usb_data omap3pandora_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
@@ -96,6 +285,9 @@ static struct twl4030_platform_data omap3pandora_twldata = {
.irq_end = TWL4030_IRQ_END,
.gpio = &omap3pandora_gpio_data,
.usb = &omap3pandora_usb_data,
+ .vmmc1 = &pandora_vmmc1,
+ .vmmc2 = &pandora_vmmc2,
+ .keypad = &pandora_kp_data,
};
static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
@@ -118,7 +310,7 @@ static int __init omap3pandora_i2c_init(void)
static void __init omap3pandora_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
@@ -188,6 +380,8 @@ static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
static struct platform_device *omap3pandora_devices[] __initdata = {
&omap3pandora_lcd_device,
+ &pandora_leds_gpio,
+ &pandora_keys_gpio,
};
static void __init omap3pandora_init(void)
@@ -201,6 +395,7 @@ static void __init omap3pandora_init(void)
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap3pandora_ads7846_init();
+ pandora_keys_gpio_init();
usb_musb_init();
}
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b1f23be..dff5528 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -27,6 +27,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -45,6 +46,7 @@
#include <mach/nand.h>
#include <mach/usb.h>
+#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
#define OVERO_GPIO_BT_XGATE 15
@@ -271,21 +273,76 @@ static struct omap_uart_config overo_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+static struct twl4030_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ },
+ {
+ .mmc = 2,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ .transceiver = true,
+ .ocr_mask = 0x00100000, /* 3.3V */
+ },
+ {} /* Terminator */
+};
+
+static struct regulator_consumer_supply overo_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static int overo_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ twl4030_mmc_init(mmc);
+
+ overo_vmmc1_supply.dev = mmc[0].dev;
+
+ return 0;
+}
+
static struct twl4030_gpio_platform_data overo_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
+ .setup = overo_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data overo_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static struct regulator_init_data overo_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &overo_vmmc1_supply,
};
+/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
+
static struct twl4030_platform_data overo_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &overo_gpio_data,
+ .usb = &overo_usb_data,
+ .vmmc1 = &overo_vmmc1,
};
static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
{
- I2C_BOARD_INFO("twl4030", 0x48),
+ I2C_BOARD_INFO("tps65950", 0x48),
.flags = I2C_CLIENT_WAKE,
.irq = INT_34XX_SYS_NIRQ,
.platform_data = &overo_twldata,
@@ -303,7 +360,7 @@ static int __init overo_i2c_init(void)
static void __init overo_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
@@ -326,23 +383,6 @@ static struct platform_device *overo_devices[] __initdata = {
&overo_lcd_device,
};
-static struct twl4030_hsmmc_info mmc[] __initdata = {
- {
- .mmc = 1,
- .wires = 4,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- },
- {
- .mmc = 2,
- .wires = 4,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- .transceiver = true,
- },
- {} /* Terminator */
-};
-
static void __init overo_init(void)
{
overo_i2c_init();
@@ -350,7 +390,6 @@ static void __init overo_init(void)
omap_board_config = overo_config;
omap_board_config_size = ARRAY_SIZE(overo_config);
omap_serial_init();
- twl4030_mmc_init(mmc);
overo_flash_init();
usb_musb_init();
overo_ads7846_init();
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index a738172..da93b86 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -27,30 +27,13 @@
#include <mach/dma.h>
#include <mach/gpmc.h>
#include <mach/keypad.h>
+#include <mach/onenand.h>
+#include <mach/gpmc-smc91x.h>
#include "mmc-twl4030.h"
-
-#define SMC91X_CS 1
-#define SMC91X_GPIO_IRQ 54
-#define SMC91X_GPIO_RESET 164
-#define SMC91X_GPIO_PWRDWN 86
-
-static struct resource rx51_smc91x_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- },
-};
-
-static struct platform_device rx51_smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(rx51_smc91x_resources),
- .resource = rx51_smc91x_resources,
-};
+#define SYSTEM_REV_B_USES_VAUX3 0x1699
+#define SYSTEM_REV_S_USES_VAUX3 0x8
static int rx51_keymap[] = {
KEY(0, 0, KEY_Q),
@@ -107,98 +90,6 @@ static struct twl4030_keypad_data rx51_kp_data = {
.rep = 1,
};
-static struct platform_device *rx51_peripherals_devices[] = {
- &rx51_smc91x_device,
-};
-
-/*
- * Timings are taken from smsc-lan91c96-ms.pdf
- */
-static int smc91x_init_gpmc(int cs)
-{
- struct gpmc_timings t;
- const int t2_r = 45; /* t2 in Figure 12.10 */
- const int t2_w = 30; /* t2 in Figure 12.11 */
- const int t3 = 15; /* t3 in Figure 12.10 */
- const int t5_r = 0; /* t5 in Figure 12.10 */
- const int t6_r = 45; /* t6 in Figure 12.10 */
- const int t6_w = 0; /* t6 in Figure 12.11 */
- const int t7_w = 15; /* t7 in Figure 12.11 */
- const int t15 = 12; /* t15 in Figure 12.2 */
- const int t20 = 185; /* t20 in Figure 12.2 */
-
- memset(&t, 0, sizeof(t));
-
- t.cs_on = t15;
- t.cs_rd_off = t3 + t2_r + t5_r; /* Figure 12.10 */
- t.cs_wr_off = t3 + t2_w + t6_w; /* Figure 12.11 */
- t.adv_on = t3; /* Figure 12.10 */
- t.adv_rd_off = t3 + t2_r; /* Figure 12.10 */
- t.adv_wr_off = t3 + t2_w; /* Figure 12.11 */
- t.oe_off = t3 + t2_r + t5_r; /* Figure 12.10 */
- t.oe_on = t.oe_off - t6_r; /* Figure 12.10 */
- t.we_off = t3 + t2_w + t6_w; /* Figure 12.11 */
- t.we_on = t.we_off - t7_w; /* Figure 12.11 */
- t.rd_cycle = t20; /* Figure 12.2 */
- t.wr_cycle = t20; /* Figure 12.4 */
- t.access = t3 + t2_r + t5_r; /* Figure 12.10 */
- t.wr_access = t3 + t2_w + t6_w; /* Figure 12.11 */
-
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16);
-
- return gpmc_cs_set_timings(cs, &t);
-}
-
-static void __init rx51_init_smc91x(void)
-{
- unsigned long cs_mem_base;
- int ret;
-
- omap_cfg_reg(U8_34XX_GPIO54_DOWN);
- omap_cfg_reg(G25_34XX_GPIO86_OUT);
- omap_cfg_reg(H19_34XX_GPIO164_OUT);
-
- if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
- return;
- }
-
- rx51_smc91x_resources[0].start = cs_mem_base + 0x300;
- rx51_smc91x_resources[0].end = cs_mem_base + 0x30f;
-
- smc91x_init_gpmc(SMC91X_CS);
-
- if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0)
- goto free1;
-
- gpio_direction_input(SMC91X_GPIO_IRQ);
- rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ);
-
- ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown");
- if (ret)
- goto free2;
- gpio_direction_output(SMC91X_GPIO_PWRDWN, 0);
-
- ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset");
- if (ret)
- goto free3;
- gpio_direction_output(SMC91X_GPIO_RESET, 0);
- gpio_set_value(SMC91X_GPIO_RESET, 1);
- msleep(100);
- gpio_set_value(SMC91X_GPIO_RESET, 0);
-
- return;
-
-free3:
- gpio_free(SMC91X_GPIO_PWRDWN);
-free2:
- gpio_free(SMC91X_GPIO_IRQ);
-free1:
- gpmc_cs_free(SMC91X_CS);
-
- printk(KERN_ERR "Could not initialize smc91x\n");
-}
-
static struct twl4030_madc_platform_data rx51_madc_data = {
.irq_line = 1,
};
@@ -259,7 +150,7 @@ static struct regulator_init_data rx51_vaux2 = {
};
/* VAUX3 - adds more power to VIO_18 rail */
-static struct regulator_init_data rx51_vaux3 = {
+static struct regulator_init_data rx51_vaux3_cam = {
.constraints = {
.name = "VCAM_DIG_18",
.min_uV = 1800000,
@@ -272,6 +163,22 @@ static struct regulator_init_data rx51_vaux3 = {
},
};
+static struct regulator_init_data rx51_vaux3_mmc = {
+ .constraints = {
+ .name = "VMMC2_30",
+ .min_uV = 2800000,
+ .max_uV = 3000000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &rx51_vmmc2_supply,
+};
+
static struct regulator_init_data rx51_vaux4 = {
.constraints = {
.name = "VCAM_ANA_28",
@@ -382,10 +289,8 @@ static struct twl4030_platform_data rx51_twldata = {
.vaux1 = &rx51_vaux1,
.vaux2 = &rx51_vaux2,
- .vaux3 = &rx51_vaux3,
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
- .vmmc2 = &rx51_vmmc2,
.vsim = &rx51_vsim,
.vdac = &rx51_vdac,
};
@@ -401,6 +306,13 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
static int __init rx51_i2c_init(void)
{
+ if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
+ system_rev >= SYSTEM_REV_B_USES_VAUX3)
+ rx51_twldata.vaux3 = &rx51_vaux3_mmc;
+ else {
+ rx51_twldata.vaux3 = &rx51_vaux3_cam;
+ rx51_twldata.vmmc2 = &rx51_vmmc2;
+ }
omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
omap_register_i2c_bus(2, 100, NULL, 0);
@@ -408,12 +320,94 @@ static int __init rx51_i2c_init(void)
return 0;
}
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition onenand_partitions[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = 0x20000,
+ .mask_flags = MTD_WRITEABLE, /* Force read-only */
+ },
+ {
+ .name = "config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x60000,
+ },
+ {
+ .name = "log",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x40000,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x200000,
+ },
+ {
+ .name = "initfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x200000,
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+ .cs = 0,
+ .gpio_irq = 65,
+ .parts = onenand_partitions,
+ .nr_parts = ARRAY_SIZE(onenand_partitions),
+};
+
+static void __init board_onenand_init(void)
+{
+ gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static inline void board_onenand_init(void)
+{
+}
+
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+ .cs = 1,
+ .gpio_irq = 54,
+ .gpio_pwrdwn = 86,
+ .gpio_reset = 164,
+ .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+ omap_cfg_reg(U8_34XX_GPIO54_DOWN);
+ omap_cfg_reg(G25_34XX_GPIO86_OUT);
+ omap_cfg_reg(H19_34XX_GPIO164_OUT);
+
+ gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
void __init rx51_peripherals_init(void)
{
- platform_add_devices(rx51_peripherals_devices,
- ARRAY_SIZE(rx51_peripherals_devices));
rx51_i2c_init();
- rx51_init_smc91x();
+ board_onenand_init();
+ board_smc91x_init();
}
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
new file mode 100644
index 0000000..bac5c43
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+
+#include <mach/gpmc.h>
+
+#define ZOOM2_SMSC911X_CS 7
+#define ZOOM2_SMSC911X_GPIO 158
+#define ZOOM2_QUADUART_CS 3
+#define ZOOM2_QUADUART_GPIO 102
+#define QUART_CLK 1843200
+#define DEBUG_BASE 0x08000000
+#define ZOOM2_ETHR_START DEBUG_BASE
+
+static struct resource zoom2_smsc911x_resources[] = {
+ [0] = {
+ .start = ZOOM2_ETHR_START,
+ .end = ZOOM2_ETHR_START + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct smsc911x_platform_config zoom2_smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device zoom2_smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(zoom2_smsc911x_resources),
+ .resource = zoom2_smsc911x_resources,
+ .dev = {
+ .platform_data = &zoom2_smsc911x_config,
+ },
+};
+
+static inline void __init zoom2_init_smsc911x(void)
+{
+ int eth_cs;
+ unsigned long cs_mem_base;
+ int eth_gpio = 0;
+
+ eth_cs = ZOOM2_SMSC911X_CS;
+
+ if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
+ return;
+ }
+
+ zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0;
+ zoom2_smsc911x_resources[0].end = cs_mem_base + 0xff;
+
+ eth_gpio = ZOOM2_SMSC911X_GPIO;
+
+ zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+
+ if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
+ eth_gpio);
+ return;
+ }
+ gpio_direction_input(eth_gpio);
+}
+
+static struct plat_serial8250_port serial_platform_data[] = {
+ {
+ .mapbase = 0x10000000,
+ .irq = OMAP_GPIO_IRQ(102),
+ .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = QUART_CLK,
+ }, {
+ .flags = 0
+ }
+};
+
+static struct platform_device zoom2_debugboard_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
+static inline void __init zoom2_init_quaduart(void)
+{
+ int quart_cs;
+ unsigned long cs_mem_base;
+ int quart_gpio = 0;
+
+ quart_cs = ZOOM2_QUADUART_CS;
+
+ if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem"
+ "for Quad UART(TL16CP754C)\n");
+ return;
+ }
+
+ quart_gpio = ZOOM2_QUADUART_GPIO;
+
+ if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
+ quart_gpio);
+ return;
+ }
+ gpio_direction_input(quart_gpio);
+}
+
+static inline int omap_zoom2_debugboard_detect(void)
+{
+ int debug_board_detect = 0;
+
+ debug_board_detect = ZOOM2_SMSC911X_GPIO;
+
+ if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug"
+ "board detect\n", debug_board_detect);
+ return 0;
+ }
+ gpio_direction_input(debug_board_detect);
+
+ if (!gpio_get_value(debug_board_detect)) {
+ gpio_free(debug_board_detect);
+ return 0;
+ }
+ return 1;
+}
+
+static struct platform_device *zoom2_devices[] __initdata = {
+ &zoom2_smsc911x_device,
+ &zoom2_debugboard_serial_device,
+};
+
+int __init omap_zoom2_debugboard_init(void)
+{
+ if (!omap_zoom2_debugboard_detect())
+ return 0;
+
+ zoom2_init_smsc911x();
+ zoom2_init_quaduart();
+ return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices));
+}
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
new file mode 100644
index 0000000..bcc0f76
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * Modified from mach-omap2/board-ldp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl4030.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/usb.h>
+
+#include "mmc-twl4030.h"
+
+static void __init omap_zoom2_init_irq(void)
+{
+ omap2_init_common_hw(NULL);
+ omap_init_irq();
+ omap_gpio_init();
+}
+
+static struct omap_uart_config zoom2_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel zoom2_config[] __initdata = {
+ { OMAP_TAG_UART, &zoom2_uart_config },
+};
+
+static struct twl4030_gpio_platform_data zoom2_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+};
+
+static struct twl4030_platform_data zoom2_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .gpio = &zoom2_gpio_data,
+};
+
+static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &zoom2_twldata,
+ },
+};
+
+static int __init omap_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
+ ARRAY_SIZE(zoom2_i2c_boardinfo));
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ },
+ {} /* Terminator */
+};
+
+extern int __init omap_zoom2_debugboard_init(void);
+
+static void __init omap_zoom2_init(void)
+{
+ omap_i2c_init();
+ omap_board_config = zoom2_config;
+ omap_board_config_size = ARRAY_SIZE(zoom2_config);
+ omap_serial_init();
+ omap_zoom2_debugboard_init();
+ twl4030_mmc_init(mmc);
+ usb_musb_init();
+}
+
+static void __init omap_zoom2_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_zoom2_map_io,
+ .init_irq = omap_zoom2_init_irq,
+ .init_machine = omap_zoom2_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 4247a15..ba528f8 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -91,9 +91,9 @@ static void _omap2xxx_clk_commit(struct clk *clk)
return;
prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
- OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+ OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
/* OCP barrier */
- prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+ prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
}
/*
@@ -547,8 +547,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
const struct clksel_rate *clkr;
u32 last_div = 0;
- printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n",
- clk->name, target_rate);
+ pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
+ clk->name, target_rate);
*new_div = 1;
@@ -562,7 +562,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
/* Sanity check */
if (clkr->div <= last_div)
- printk(KERN_ERR "clock: clksel_rate table not sorted "
+ pr_err("clock: clksel_rate table not sorted "
"for clock %s", clk->name);
last_div = clkr->div;
@@ -574,7 +574,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
}
if (!clkr->div) {
- printk(KERN_ERR "clock: Could not find divisor for target "
+ pr_err("clock: Could not find divisor for target "
"rate %ld for clock %s parent %s\n", target_rate,
clk->name, clk->parent->name);
return ~0;
@@ -582,8 +582,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
*new_div = clkr->div;
- printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div,
- (clk->parent->rate / clkr->div));
+ pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
+ (clk->parent->rate / clkr->div));
return (clk->parent->rate / clkr->div);
}
@@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk)
if ((regval32 & (1 << clk->enable_bit)) == v)
return;
- printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
+ printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
if (cpu_is_omap34xx()) {
omap2_clk_enable(clk);
omap2_clk_disable(clk);
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index e4cef33..44de027 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -233,6 +233,8 @@ static struct prcm_config *curr_prcm_set;
static struct clk *vclk;
static struct clk *sclk;
+static void __iomem *prcm_clksrc_ctrl;
+
/*-------------------------------------------------------------------------
* Omap24xx specific clock functions
*-------------------------------------------------------------------------*/
@@ -269,10 +271,9 @@ static int omap2_enable_osc_ck(struct clk *clk)
{
u32 pcc;
- pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+ pcc = __raw_readl(prcm_clksrc_ctrl);
- __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK,
- OMAP24XX_PRCM_CLKSRC_CTRL);
+ __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
return 0;
}
@@ -281,10 +282,9 @@ static void omap2_disable_osc_ck(struct clk *clk)
{
u32 pcc;
- pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+ pcc = __raw_readl(prcm_clksrc_ctrl);
- __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK,
- OMAP24XX_PRCM_CLKSRC_CTRL);
+ __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
}
static const struct clkops clkops_oscck = {
@@ -654,7 +654,7 @@ static u32 omap2_get_sysclkdiv(void)
{
u32 div;
- div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+ div = __raw_readl(prcm_clksrc_ctrl);
div &= OMAP_SYSCLKDIV_MASK;
div >>= OMAP_SYSCLKDIV_SHIFT;
@@ -714,15 +714,18 @@ int __init omap2_clk_init(void)
struct omap_clk *c;
u32 clkrate;
- if (cpu_is_omap242x())
+ if (cpu_is_omap242x()) {
+ prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
cpu_mask = RATE_IN_242X;
- else if (cpu_is_omap2430())
+ } else if (cpu_is_omap2430()) {
+ prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
cpu_mask = RATE_IN_243X;
+ }
clk_init(&omap2_clk_functions);
for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
- clk_init_one(c->lk.clk);
+ clk_preinit(c->lk.clk);
osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
propagate_rate(&osc_ck);
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 88c5acb..458f00c 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -24,6 +24,17 @@
#include "cm-regbits-24xx.h"
#include "sdrc.h"
+/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
+#ifdef CONFIG_ARCH_OMAP2420
+#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL
+#else
+#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL
+#endif
+
static unsigned long omap2_table_mpu_recalc(struct clk *clk);
static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index ba05aa4..9e43fe5 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -129,6 +129,9 @@ static struct omap_clk omap34xx_clks[] = {
CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2),
CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2),
CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1),
+ CLK(NULL, "modem_fck", &modem_fck, CK_343X),
+ CLK(NULL, "sad2d_ick", &sad2d_ick, CK_343X),
+ CLK(NULL, "mad2d_ick", &mad2d_ick, CK_343X),
CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X),
CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X),
CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2),
@@ -281,6 +284,8 @@ static struct omap_clk omap34xx_clks[] = {
#define MAX_DPLL_WAIT_TRIES 1000000
+#define MIN_SDRC_DLL_LOCK_FREQ 83000000
+
/**
* omap3_dpll_recalc - recalculate DPLL rate
* @clk: DPLL struct clk
@@ -703,6 +708,7 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
{
u32 new_div = 0;
+ u32 unlock_dll = 0;
unsigned long validrate, sdrcrate;
struct omap_sdrc_params *sp;
@@ -729,17 +735,22 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
if (!sp)
return -EINVAL;
- pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
- validrate);
- pr_info("clock: SDRC timing params used: %08x %08x %08x\n",
- sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+ if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
+ pr_debug("clock: will unlock SDRC DLL\n");
+ unlock_dll = 1;
+ }
+
+ pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+ validrate);
+ pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
+ sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
/* REVISIT: SRAM code doesn't support other M2 divisors yet */
WARN_ON(new_div != 1 && new_div != 2);
/* REVISIT: Add SDRC_MR changing to this code also */
omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
- sp->actim_ctrlb, new_div);
+ sp->actim_ctrlb, new_div, unlock_dll);
return 0;
}
@@ -956,7 +967,7 @@ int __init omap2_clk_init(void)
clk_init(&omap2_clk_functions);
for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
- clk_init_one(c->lk.clk);
+ clk_preinit(c->lk.clk);
for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
if (c->cpu & cpu_clkflg) {
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 017a30e..e433aec 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -27,6 +27,8 @@
#include "prm.h"
#include "prm-regbits-34xx.h"
+#define OMAP_CM_REGADDR OMAP34XX_CM_REGADDR
+
static unsigned long omap3_dpll_recalc(struct clk *clk);
static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
static void omap3_dpll_allow_idle(struct clk *clk);
@@ -1228,6 +1230,37 @@ static struct clk d2d_26m_fck = {
.recalc = &followparent_recalc,
};
+static struct clk modem_fck = {
+ .name = "modem_fck",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &sys_ck,
+ .init = &omap2_init_clk_clkdm,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+ .enable_bit = OMAP3430_EN_MODEM_SHIFT,
+ .clkdm_name = "d2d_clkdm",
+ .recalc = &followparent_recalc,
+};
+
+static struct clk sad2d_ick = {
+ .name = "sad2d_ick",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &l3_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = OMAP3430_EN_SAD2D_SHIFT,
+ .clkdm_name = "d2d_clkdm",
+ .recalc = &followparent_recalc,
+};
+
+static struct clk mad2d_ick = {
+ .name = "mad2d_ick",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &l3_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+ .enable_bit = OMAP3430_EN_MAD2D_SHIFT,
+ .clkdm_name = "d2d_clkdm",
+ .recalc = &followparent_recalc,
+};
+
static const struct clksel omap343x_gpt_clksel[] = {
{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
{ .parent = &sys_ck, .rates = gpt_sys_rates },
@@ -1945,8 +1978,6 @@ static struct clk usb_l4_ick = {
.recalc = &omap2_clksel_recalc,
};
-/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */
-
/* SECURITY_L4_ICK2 based clocks */
static struct clk security_l4_ick2 = {
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index 281d5da..fe319ae 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -195,7 +195,7 @@ static struct clockdomain sgx_clkdm = {
static struct clockdomain d2d_clkdm = {
.name = "d2d_clkdm",
.pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 6f3f5a3..6923deb 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -145,6 +145,8 @@
#define OMAP3430_CLKACTIVITY_MPU_MASK (1 << 0)
/* CM_FCLKEN1_CORE specific bits */
+#define OMAP3430_EN_MODEM (1 << 31)
+#define OMAP3430_EN_MODEM_SHIFT 31
/* CM_ICLKEN1_CORE specific bits */
#define OMAP3430_EN_ICR (1 << 29)
@@ -161,6 +163,8 @@
#define OMAP3430_EN_MAILBOXES_SHIFT 7
#define OMAP3430_EN_OMAPCTRL (1 << 6)
#define OMAP3430_EN_OMAPCTRL_SHIFT 6
+#define OMAP3430_EN_SAD2D (1 << 3)
+#define OMAP3430_EN_SAD2D_SHIFT 3
#define OMAP3430_EN_SDRC (1 << 1)
#define OMAP3430_EN_SDRC_SHIFT 1
@@ -176,6 +180,10 @@
#define OMAP3430_EN_DES1 (1 << 0)
#define OMAP3430_EN_DES1_SHIFT 0
+/* CM_ICLKEN3_CORE */
+#define OMAP3430_EN_MAD2D_SHIFT 3
+#define OMAP3430_EN_MAD2D (1 << 3)
+
/* CM_FCLKEN3_CORE specific bits */
#define OMAP3430ES2_EN_TS_SHIFT 1
#define OMAP3430ES2_EN_TS_MASK (1 << 1)
@@ -231,6 +239,8 @@
#define OMAP3430ES2_ST_CPEFUSE_MASK (1 << 0)
/* CM_AUTOIDLE1_CORE */
+#define OMAP3430_AUTO_MODEM (1 << 31)
+#define OMAP3430_AUTO_MODEM_SHIFT 31
#define OMAP3430ES2_AUTO_MMC3 (1 << 30)
#define OMAP3430ES2_AUTO_MMC3_SHIFT 30
#define OMAP3430ES2_AUTO_ICR (1 << 29)
@@ -287,6 +297,8 @@
#define OMAP3430_AUTO_HSOTGUSB_SHIFT 4
#define OMAP3430ES1_AUTO_D2D (1 << 3)
#define OMAP3430ES1_AUTO_D2D_SHIFT 3
+#define OMAP3430_AUTO_SAD2D (1 << 3)
+#define OMAP3430_AUTO_SAD2D_SHIFT 3
#define OMAP3430_AUTO_SSI (1 << 0)
#define OMAP3430_AUTO_SSI_SHIFT 0
@@ -308,6 +320,8 @@
#define OMAP3430ES2_AUTO_USBTLL (1 << 2)
#define OMAP3430ES2_AUTO_USBTLL_SHIFT 2
#define OMAP3430ES2_AUTO_USBTLL_MASK (1 << 2)
+#define OMAP3430_AUTO_MAD2D_SHIFT 3
+#define OMAP3430_AUTO_MAD2D (1 << 3)
/* CM_CLKSEL_CORE */
#define OMAP3430_CLKSEL_SSI_SHIFT 8
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 65fdf78..1d3c93b 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -16,17 +16,12 @@
#include "prcm-common.h"
-#ifndef __ASSEMBLER__
-#define OMAP_CM_REGADDR(module, reg) \
- IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
-#else
#define OMAP2420_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
#define OMAP2430_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
#define OMAP34XX_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
-#endif
/*
* Architecture-specific global CM registers
@@ -38,6 +33,7 @@
#define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010)
#define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c)
+#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
/*
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
new file mode 100644
index 0000000..2fd22f9
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -0,0 +1,330 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-onenand.c
+ *
+ * Copyright (C) 2006 - 2009 Nokia Corporation
+ * Contacts: Juha Yrjola
+ * Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/onenand_regs.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+
+#include <mach/onenand.h>
+#include <mach/board.h>
+#include <mach/gpmc.h>
+
+static struct omap_onenand_platform_data *gpmc_onenand_data;
+
+static struct platform_device gpmc_onenand_device = {
+ .name = "omap2-onenand",
+ .id = -1,
+};
+
+static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
+{
+ struct gpmc_timings t;
+
+ const int t_cer = 15;
+ const int t_avdp = 12;
+ const int t_aavdh = 7;
+ const int t_ce = 76;
+ const int t_aa = 76;
+ const int t_oe = 20;
+ const int t_cez = 20; /* max of t_cez, t_oez */
+ const int t_ds = 30;
+ const int t_wpl = 40;
+ const int t_wph = 30;
+
+ memset(&t, 0, sizeof(t));
+ t.sync_clk = 0;
+ t.cs_on = 0;
+ t.adv_on = 0;
+
+ /* Read */
+ t.adv_rd_off = gpmc_round_ns_to_ticks(max_t(int, t_avdp, t_cer));
+ t.oe_on = t.adv_rd_off + gpmc_round_ns_to_ticks(t_aavdh);
+ t.access = t.adv_on + gpmc_round_ns_to_ticks(t_aa);
+ t.access = max_t(int, t.access, t.cs_on + gpmc_round_ns_to_ticks(t_ce));
+ t.access = max_t(int, t.access, t.oe_on + gpmc_round_ns_to_ticks(t_oe));
+ t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+ t.cs_rd_off = t.oe_off;
+ t.rd_cycle = t.cs_rd_off + gpmc_round_ns_to_ticks(t_cez);
+
+ /* Write */
+ t.adv_wr_off = t.adv_rd_off;
+ t.we_on = t.oe_on;
+ if (cpu_is_omap34xx()) {
+ t.wr_data_mux_bus = t.we_on;
+ t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+ }
+ t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+ t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+ t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+
+ /* Configure GPMC for asynchronous read */
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+ GPMC_CONFIG1_DEVICESIZE_16 |
+ GPMC_CONFIG1_MUXADDDATA);
+
+ return gpmc_cs_set_timings(cs, &t);
+}
+
+static void set_onenand_cfg(void __iomem *onenand_base, int latency,
+ int sync_read, int sync_write, int hf)
+{
+ u32 reg;
+
+ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+ reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
+ reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
+ ONENAND_SYS_CFG1_BL_16;
+ if (sync_read)
+ reg |= ONENAND_SYS_CFG1_SYNC_READ;
+ else
+ reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
+ if (sync_write)
+ reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
+ else
+ reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
+ if (hf)
+ reg |= ONENAND_SYS_CFG1_HF;
+ else
+ reg &= ~ONENAND_SYS_CFG1_HF;
+ writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+}
+
+static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
+ void __iomem *onenand_base,
+ int freq)
+{
+ struct gpmc_timings t;
+ const int t_cer = 15;
+ const int t_avdp = 12;
+ const int t_cez = 20; /* max of t_cez, t_oez */
+ const int t_ds = 30;
+ const int t_wpl = 40;
+ const int t_wph = 30;
+ int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
+ int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
+ int first_time = 0, hf = 0, sync_read = 0, sync_write = 0;
+ int err, ticks_cez;
+ int cs = cfg->cs;
+ u32 reg;
+
+ if (cfg->flags & ONENAND_SYNC_READ) {
+ sync_read = 1;
+ } else if (cfg->flags & ONENAND_SYNC_READWRITE) {
+ sync_read = 1;
+ sync_write = 1;
+ }
+
+ if (!freq) {
+ /* Very first call freq is not known */
+ err = omap2_onenand_set_async_mode(cs, onenand_base);
+ if (err)
+ return err;
+ reg = readw(onenand_base + ONENAND_REG_VERSION_ID);
+ switch ((reg >> 4) & 0xf) {
+ case 0:
+ freq = 40;
+ break;
+ case 1:
+ freq = 54;
+ break;
+ case 2:
+ freq = 66;
+ break;
+ case 3:
+ freq = 83;
+ break;
+ case 4:
+ freq = 104;
+ break;
+ default:
+ freq = 54;
+ break;
+ }
+ first_time = 1;
+ }
+
+ switch (freq) {
+ case 83:
+ min_gpmc_clk_period = 12; /* 83 MHz */
+ t_ces = 5;
+ t_avds = 4;
+ t_avdh = 2;
+ t_ach = 6;
+ t_aavdh = 6;
+ t_rdyo = 9;
+ break;
+ case 66:
+ min_gpmc_clk_period = 15; /* 66 MHz */
+ t_ces = 6;
+ t_avds = 5;
+ t_avdh = 2;
+ t_ach = 6;
+ t_aavdh = 6;
+ t_rdyo = 11;
+ break;
+ default:
+ min_gpmc_clk_period = 18; /* 54 MHz */
+ t_ces = 7;
+ t_avds = 7;
+ t_avdh = 7;
+ t_ach = 9;
+ t_aavdh = 7;
+ t_rdyo = 15;
+ sync_write = 0;
+ break;
+ }
+
+ tick_ns = gpmc_ticks_to_ns(1);
+ div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
+ gpmc_clk_ns = gpmc_ticks_to_ns(div);
+ if (gpmc_clk_ns < 15) /* >66Mhz */
+ hf = 1;
+ if (hf)
+ latency = 6;
+ else if (gpmc_clk_ns >= 25) /* 40 MHz*/
+ latency = 3;
+ else
+ latency = 4;
+
+ if (first_time)
+ set_onenand_cfg(onenand_base, latency,
+ sync_read, sync_write, hf);
+
+ if (div == 1) {
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+ reg |= (1 << 7);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+ reg |= (1 << 7);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+ reg |= (1 << 7);
+ reg |= (1 << 23);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+ } else {
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+ reg &= ~(1 << 7);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+ reg &= ~(1 << 7);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+ reg &= ~(1 << 7);
+ reg &= ~(1 << 23);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+ }
+
+ /* Set synchronous read timings */
+ memset(&t, 0, sizeof(t));
+ t.sync_clk = min_gpmc_clk_period;
+ t.cs_on = 0;
+ t.adv_on = 0;
+ fclk_offset_ns = gpmc_round_ns_to_ticks(max_t(int, t_ces, t_avds));
+ fclk_offset = gpmc_ns_to_ticks(fclk_offset_ns);
+ t.page_burst_access = gpmc_clk_ns;
+
+ /* Read */
+ t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh));
+ t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach));
+ t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div);
+ t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+ t.cs_rd_off = t.oe_off;
+ ticks_cez = ((gpmc_ns_to_ticks(t_cez) + div - 1) / div) * div;
+ t.rd_cycle = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div +
+ ticks_cez);
+
+ /* Write */
+ if (sync_write) {
+ t.adv_wr_off = t.adv_rd_off;
+ t.we_on = 0;
+ t.we_off = t.cs_rd_off;
+ t.cs_wr_off = t.cs_rd_off;
+ t.wr_cycle = t.rd_cycle;
+ if (cpu_is_omap34xx()) {
+ t.wr_data_mux_bus = gpmc_ticks_to_ns(fclk_offset +
+ gpmc_ns_to_ticks(min_gpmc_clk_period +
+ t_rdyo));
+ t.wr_access = t.access;
+ }
+ } else {
+ t.adv_wr_off = gpmc_round_ns_to_ticks(max_t(int,
+ t_avdp, t_cer));
+ t.we_on = t.adv_wr_off + gpmc_round_ns_to_ticks(t_aavdh);
+ t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+ t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+ t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+ if (cpu_is_omap34xx()) {
+ t.wr_data_mux_bus = t.we_on;
+ t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+ }
+ }
+
+ /* Configure GPMC for synchronous read */
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+ GPMC_CONFIG1_WRAPBURST_SUPP |
+ GPMC_CONFIG1_READMULTIPLE_SUPP |
+ (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) |
+ (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) |
+ (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) |
+ GPMC_CONFIG1_CLKACTIVATIONTIME(fclk_offset) |
+ GPMC_CONFIG1_PAGE_LEN(2) |
+ (cpu_is_omap34xx() ? 0 :
+ (GPMC_CONFIG1_WAIT_READ_MON |
+ GPMC_CONFIG1_WAIT_PIN_SEL(0))) |
+ GPMC_CONFIG1_DEVICESIZE_16 |
+ GPMC_CONFIG1_DEVICETYPE_NOR |
+ GPMC_CONFIG1_MUXADDDATA);
+
+ err = gpmc_cs_set_timings(cs, &t);
+ if (err)
+ return err;
+
+ set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf);
+
+ return 0;
+}
+
+static int gpmc_onenand_setup(void __iomem *onenand_base, int freq)
+{
+ struct device *dev = &gpmc_onenand_device.dev;
+
+ /* Set sync timings in GPMC */
+ if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
+ freq) < 0) {
+ dev_err(dev, "Unable to set synchronous mode\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
+{
+ gpmc_onenand_data = _onenand_data;
+ gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
+ gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
+
+ if (cpu_is_omap24xx() &&
+ (gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) {
+ printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n");
+ gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE;
+ gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
+ }
+
+ if (platform_device_register(&gpmc_onenand_device) < 0) {
+ printk(KERN_ERR "Unable to register OneNAND device\n");
+ return;
+ }
+}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
new file mode 100644
index 0000000..df99d31
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-smc91x.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Contact: Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/smc91x.h>
+
+#include <mach/board.h>
+#include <mach/gpmc.h>
+#include <mach/gpmc-smc91x.h>
+
+static struct omap_smc91x_platform_data *gpmc_cfg;
+
+static struct resource gpmc_smc91x_resources[] = {
+ [0] = {
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct smc91x_platdata gpmc_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
+};
+
+static struct platform_device gpmc_smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(gpmc_smc91x_resources),
+ .resource = gpmc_smc91x_resources,
+ .dev = {
+ .platform_data = &gpmc_smc91x_info,
+ },
+};
+
+/*
+ * Set the gpmc timings for smc91c96. The timings are taken
+ * from the data sheet available at:
+ * http://www.smsc.com/main/catalog/lan91c96.html
+ * REVISIT: Level shifters can add at least to the access latency.
+ */
+static int smc91c96_gpmc_retime(void)
+{
+ struct gpmc_timings t;
+ const int t3 = 10; /* Figure 12.2 read and 12.4 write */
+ const int t4_r = 20; /* Figure 12.2 read */
+ const int t4_w = 5; /* Figure 12.4 write */
+ const int t5 = 25; /* Figure 12.2 read */
+ const int t6 = 15; /* Figure 12.2 read */
+ const int t7 = 5; /* Figure 12.4 write */
+ const int t8 = 5; /* Figure 12.4 write */
+ const int t20 = 185; /* Figure 12.2 read and 12.4 write */
+ u32 l;
+
+ memset(&t, 0, sizeof(t));
+
+ /* Read timings */
+ t.cs_on = 0;
+ t.adv_on = t.cs_on;
+ t.oe_on = t.adv_on + t3;
+ t.access = t.oe_on + t5;
+ t.oe_off = t.access;
+ t.adv_rd_off = t.oe_off + max(t4_r, t6);
+ t.cs_rd_off = t.oe_off;
+ t.rd_cycle = t20 - t.oe_on;
+
+ /* Write timings */
+ t.we_on = t.adv_on + t3;
+
+ if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) {
+ t.wr_data_mux_bus = t.we_on;
+ t.we_off = t.wr_data_mux_bus + t7;
+ } else
+ t.we_off = t.we_on + t7;
+ if (cpu_is_omap34xx())
+ t.wr_access = t.we_off;
+ t.adv_wr_off = t.we_off + max(t4_w, t8);
+ t.cs_wr_off = t.we_off + t4_w;
+ t.wr_cycle = t20 - t.we_on;
+
+ l = GPMC_CONFIG1_DEVICESIZE_16;
+ if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+ l |= GPMC_CONFIG1_MUXADDDATA;
+ if (gpmc_cfg->flags & GPMC_READ_MON)
+ l |= GPMC_CONFIG1_WAIT_READ_MON;
+ if (gpmc_cfg->flags & GPMC_WRITE_MON)
+ l |= GPMC_CONFIG1_WAIT_WRITE_MON;
+ if (gpmc_cfg->wait_pin)
+ l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);
+ gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);
+
+ /*
+ * FIXME: Calculate the address and data bus muxed timings.
+ * Note that at least adv_rd_off needs to be changed according
+ * to omap3430 TRM Figure 11-11. Are the sdp boards using the
+ * FPGA in between smc91x and omap as the timings are different
+ * from above?
+ */
+ if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+ return 0;
+
+ return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
+}
+
+/*
+ * Initialize smc91x device connected to the GPMC. Note that we
+ * assume that pin multiplexing is done in the board-*.c file,
+ * or in the bootloader.
+ */
+void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
+{
+ unsigned long cs_mem_base;
+ int ret;
+
+ gpmc_cfg = board_data;
+
+ if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
+ gpmc_cfg->retime = smc91c96_gpmc_retime;
+
+ if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+ return;
+ }
+
+ gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
+ gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
+ gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
+
+ if (gpmc_cfg->retime) {
+ ret = gpmc_cfg->retime();
+ if (ret != 0)
+ goto free1;
+ }
+
+ if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0)
+ goto free1;
+
+ gpio_direction_input(gpmc_cfg->gpio_irq);
+ gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
+
+ if (gpmc_cfg->gpio_pwrdwn) {
+ ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown");
+ if (ret)
+ goto free2;
+ gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0);
+ }
+
+ if (gpmc_cfg->gpio_reset) {
+ ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset");
+ if (ret)
+ goto free3;
+
+ gpio_direction_output(gpmc_cfg->gpio_reset, 0);
+ gpio_set_value(gpmc_cfg->gpio_reset, 1);
+ msleep(100);
+ gpio_set_value(gpmc_cfg->gpio_reset, 0);
+ }
+
+ if (platform_device_register(&gpmc_smc91x_device) < 0) {
+ printk(KERN_ERR "Unable to register smc91x device\n");
+ gpio_free(gpmc_cfg->gpio_reset);
+ goto free3;
+ }
+
+ return;
+
+free3:
+ if (gpmc_cfg->gpio_pwrdwn)
+ gpio_free(gpmc_cfg->gpio_pwrdwn);
+free2:
+ gpio_free(gpmc_cfg->gpio_irq);
+free1:
+ gpmc_cs_free(gpmc_cfg->cs);
+
+ printk(KERN_ERR "Could not initialize smc91x\n");
+}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 2249049..f91934b 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -5,6 +5,9 @@
*
* Author: Juha Yrjola
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -424,6 +427,9 @@ void __init gpmc_init(void)
} else if (cpu_is_omap34xx()) {
ck = "gpmc_fck";
l = OMAP34XX_GPMC_BASE;
+ } else if (cpu_is_omap44xx()) {
+ ck = "gpmc_fck";
+ l = OMAP44XX_GPMC_BASE;
}
gpmc_l3_clk = clk_get(NULL, ck);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 34b5914..458990e 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -6,6 +6,9 @@
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -200,7 +203,10 @@ void __init omap2_check_revision(void)
omap24xx_check_revision();
else if (cpu_is_omap34xx())
omap34xx_check_revision();
- else
+ else if (cpu_is_omap44xx()) {
+ printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
+ return;
+ } else
pr_err("OMAP revision unknown, please fix!\n");
/*
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 916fcd3..32afd94 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -4,12 +4,14 @@
* OMAP2 I/O mapping code
*
* Copyright (C) 2005 Nokia Corporation
- * Copyright (C) 2007 Texas Instruments
+ * Copyright (C) 2007-2009 Texas Instruments
*
* Author:
* Juha Yrjola <juha.yrjola@nokia.com>
* Syed Khasim <x0khasim@ti.com>
*
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -30,6 +32,7 @@
#include <mach/sdrc.h>
#include <mach/gpmc.h>
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */
#include "clock.h"
#include <mach/powerdomain.h>
@@ -38,7 +41,7 @@
#include <mach/clockdomain.h>
#include "clockdomains.h"
-
+#endif
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
@@ -166,6 +169,46 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
},
};
#endif
+#ifdef CONFIG_ARCH_OMAP4
+static struct map_desc omap44xx_io_desc[] __initdata = {
+ {
+ .virtual = L3_44XX_VIRT,
+ .pfn = __phys_to_pfn(L3_44XX_PHYS),
+ .length = L3_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_44XX_PHYS),
+ .length = L4_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_WK_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_WK_44XX_PHYS),
+ .length = L4_WK_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = OMAP44XX_GPMC_VIRT,
+ .pfn = __phys_to_pfn(OMAP44XX_GPMC_PHYS),
+ .length = OMAP44XX_GPMC_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_PER_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_PER_44XX_PHYS),
+ .length = L4_PER_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_EMU_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_EMU_44XX_PHYS),
+ .length = L4_EMU_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+#endif
void __init omap2_map_common_io(void)
{
@@ -183,6 +226,9 @@ void __init omap2_map_common_io(void)
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+#endif
/* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
* revision check below.
@@ -198,9 +244,11 @@ void __init omap2_map_common_io(void)
void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
{
omap2_mux_init();
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
omap2_sdrc_init(sp);
+#endif
gpmc_init();
}
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
new file mode 100644
index 0000000..015f22a
--- /dev/null
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -0,0 +1,323 @@
+/*
+ * omap iommu: omap2/3 architecture specific functions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ * Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/stringify.h>
+
+#include <mach/iommu.h>
+
+/*
+ * omap2 architecture specific register bit definitions
+ */
+#define IOMMU_ARCH_VERSION 0x00000011
+
+/* SYSCONF */
+#define MMU_SYS_IDLE_SHIFT 3
+#define MMU_SYS_IDLE_FORCE (0 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_NONE (1 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_SMART (2 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_MASK (3 << MMU_SYS_IDLE_SHIFT)
+
+#define MMU_SYS_SOFTRESET (1 << 1)
+#define MMU_SYS_AUTOIDLE 1
+
+/* SYSSTATUS */
+#define MMU_SYS_RESETDONE 1
+
+/* IRQSTATUS & IRQENABLE */
+#define MMU_IRQ_MULTIHITFAULT (1 << 4)
+#define MMU_IRQ_TABLEWALKFAULT (1 << 3)
+#define MMU_IRQ_EMUMISS (1 << 2)
+#define MMU_IRQ_TRANSLATIONFAULT (1 << 1)
+#define MMU_IRQ_TLBMISS (1 << 0)
+#define MMU_IRQ_MASK \
+ (MMU_IRQ_MULTIHITFAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_EMUMISS | \
+ MMU_IRQ_TRANSLATIONFAULT)
+
+/* MMU_CNTL */
+#define MMU_CNTL_SHIFT 1
+#define MMU_CNTL_MASK (7 << MMU_CNTL_SHIFT)
+#define MMU_CNTL_EML_TLB (1 << 3)
+#define MMU_CNTL_TWL_EN (1 << 2)
+#define MMU_CNTL_MMU_EN (1 << 1)
+
+#define get_cam_va_mask(pgsz) \
+ (((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 : \
+ ((pgsz) == MMU_CAM_PGSZ_1M) ? 0xfff00000 : \
+ ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \
+ ((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0)
+
+static int omap2_iommu_enable(struct iommu *obj)
+{
+ u32 l, pa;
+ unsigned long timeout;
+
+ if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd, SZ_16K))
+ return -EINVAL;
+
+ pa = virt_to_phys(obj->iopgd);
+ if (!IS_ALIGNED(pa, SZ_16K))
+ return -EINVAL;
+
+ iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG);
+
+ timeout = jiffies + msecs_to_jiffies(20);
+ do {
+ l = iommu_read_reg(obj, MMU_SYSSTATUS);
+ if (l & MMU_SYS_RESETDONE)
+ break;
+ } while (time_after(jiffies, timeout));
+
+ if (!(l & MMU_SYS_RESETDONE)) {
+ dev_err(obj->dev, "can't take mmu out of reset\n");
+ return -ENODEV;
+ }
+
+ l = iommu_read_reg(obj, MMU_REVISION);
+ dev_info(obj->dev, "%s: version %d.%d\n", obj->name,
+ (l >> 4) & 0xf, l & 0xf);
+
+ l = iommu_read_reg(obj, MMU_SYSCONFIG);
+ l &= ~MMU_SYS_IDLE_MASK;
+ l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE);
+ iommu_write_reg(obj, l, MMU_SYSCONFIG);
+
+ iommu_write_reg(obj, MMU_IRQ_MASK, MMU_IRQENABLE);
+ iommu_write_reg(obj, pa, MMU_TTB);
+
+ l = iommu_read_reg(obj, MMU_CNTL);
+ l &= ~MMU_CNTL_MASK;
+ l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
+ iommu_write_reg(obj, l, MMU_CNTL);
+
+ return 0;
+}
+
+static void omap2_iommu_disable(struct iommu *obj)
+{
+ u32 l = iommu_read_reg(obj, MMU_CNTL);
+
+ l &= ~MMU_CNTL_MASK;
+ iommu_write_reg(obj, l, MMU_CNTL);
+ iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG);
+
+ dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
+}
+
+static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
+{
+ int i;
+ u32 stat, da;
+ const char *err_msg[] = {
+ "tlb miss",
+ "translation fault",
+ "emulation miss",
+ "table walk fault",
+ "multi hit fault",
+ };
+
+ stat = iommu_read_reg(obj, MMU_IRQSTATUS);
+ stat &= MMU_IRQ_MASK;
+ if (!stat)
+ return 0;
+
+ da = iommu_read_reg(obj, MMU_FAULT_AD);
+ *ra = da;
+
+ dev_err(obj->dev, "%s:\tda:%08x ", __func__, da);
+
+ for (i = 0; i < ARRAY_SIZE(err_msg); i++) {
+ if (stat & (1 << i))
+ printk("%s ", err_msg[i]);
+ }
+ printk("\n");
+
+ iommu_write_reg(obj, stat, MMU_IRQSTATUS);
+ return stat;
+}
+
+static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+{
+ cr->cam = iommu_read_reg(obj, MMU_READ_CAM);
+ cr->ram = iommu_read_reg(obj, MMU_READ_RAM);
+}
+
+static void omap2_tlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+{
+ iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM);
+ iommu_write_reg(obj, cr->ram, MMU_RAM);
+}
+
+static u32 omap2_cr_to_virt(struct cr_regs *cr)
+{
+ u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK;
+ u32 mask = get_cam_va_mask(cr->cam & page_size);
+
+ return cr->cam & mask;
+}
+
+static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e)
+{
+ struct cr_regs *cr;
+
+ if (e->da & ~(get_cam_va_mask(e->pgsz))) {
+ dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__,
+ e->da);
+ return ERR_PTR(-EINVAL);
+ }
+
+ cr = kmalloc(sizeof(*cr), GFP_KERNEL);
+ if (!cr)
+ return ERR_PTR(-ENOMEM);
+
+ cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz;
+ cr->ram = e->pa | e->endian | e->elsz | e->mixed;
+
+ return cr;
+}
+
+static inline int omap2_cr_valid(struct cr_regs *cr)
+{
+ return cr->cam & MMU_CAM_V;
+}
+
+static u32 omap2_get_pte_attr(struct iotlb_entry *e)
+{
+ u32 attr;
+
+ attr = e->mixed << 5;
+ attr |= e->endian;
+ attr |= e->elsz >> 3;
+ attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6);
+
+ return attr;
+}
+
+static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
+{
+ char *p = buf;
+
+ /* FIXME: Need more detail analysis of cam/ram */
+ p += sprintf(p, "%08x %08x\n", cr->cam, cr->ram);
+
+ return p - buf;
+}
+
+#define pr_reg(name) \
+ p += sprintf(p, "%20s: %08x\n", \
+ __stringify(name), iommu_read_reg(obj, MMU_##name));
+
+static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
+{
+ char *p = buf;
+
+ pr_reg(REVISION);
+ pr_reg(SYSCONFIG);
+ pr_reg(SYSSTATUS);
+ pr_reg(IRQSTATUS);
+ pr_reg(IRQENABLE);
+ pr_reg(WALKING_ST);
+ pr_reg(CNTL);
+ pr_reg(FAULT_AD);
+ pr_reg(TTB);
+ pr_reg(LOCK);
+ pr_reg(LD_TLB);
+ pr_reg(CAM);
+ pr_reg(RAM);
+ pr_reg(GFLUSH);
+ pr_reg(FLUSH_ENTRY);
+ pr_reg(READ_CAM);
+ pr_reg(READ_RAM);
+ pr_reg(EMU_FAULT_AD);
+
+ return p - buf;
+}
+
+static void omap2_iommu_save_ctx(struct iommu *obj)
+{
+ int i;
+ u32 *p = obj->ctx;
+
+ for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
+ p[i] = iommu_read_reg(obj, i * sizeof(u32));
+ dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
+ }
+
+ BUG_ON(p[0] != IOMMU_ARCH_VERSION);
+}
+
+static void omap2_iommu_restore_ctx(struct iommu *obj)
+{
+ int i;
+ u32 *p = obj->ctx;
+
+ for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
+ iommu_write_reg(obj, p[i], i * sizeof(u32));
+ dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
+ }
+
+ BUG_ON(p[0] != IOMMU_ARCH_VERSION);
+}
+
+static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+ e->da = cr->cam & MMU_CAM_VATAG_MASK;
+ e->pa = cr->ram & MMU_RAM_PADDR_MASK;
+ e->valid = cr->cam & MMU_CAM_V;
+ e->pgsz = cr->cam & MMU_CAM_PGSZ_MASK;
+ e->endian = cr->ram & MMU_RAM_ENDIAN_MASK;
+ e->elsz = cr->ram & MMU_RAM_ELSZ_MASK;
+ e->mixed = cr->ram & MMU_RAM_MIXED;
+}
+
+static const struct iommu_functions omap2_iommu_ops = {
+ .version = IOMMU_ARCH_VERSION,
+
+ .enable = omap2_iommu_enable,
+ .disable = omap2_iommu_disable,
+ .fault_isr = omap2_iommu_fault_isr,
+
+ .tlb_read_cr = omap2_tlb_read_cr,
+ .tlb_load_cr = omap2_tlb_load_cr,
+
+ .cr_to_e = omap2_cr_to_e,
+ .cr_to_virt = omap2_cr_to_virt,
+ .alloc_cr = omap2_alloc_cr,
+ .cr_valid = omap2_cr_valid,
+ .dump_cr = omap2_dump_cr,
+
+ .get_pte_attr = omap2_get_pte_attr,
+
+ .save_ctx = omap2_iommu_save_ctx,
+ .restore_ctx = omap2_iommu_restore_ctx,
+ .dump_ctx = omap2_iommu_dump_ctx,
+};
+
+static int __init omap2_iommu_init(void)
+{
+ return install_iommu_arch(&omap2_iommu_ops);
+}
+module_init(omap2_iommu_init);
+
+static void __exit omap2_iommu_exit(void)
+{
+ uninstall_iommu_arch(&omap2_iommu_ops);
+}
+module_exit(omap2_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 998c5c4..b828638 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -28,7 +28,6 @@
#define INTC_MIR_CLEAR0 0x0088
#define INTC_MIR_SET0 0x008c
#define INTC_PENDING_IRQ0 0x0098
-
/* Number of IRQ state bits in each MIR register */
#define IRQ_BITS_PER_REG 32
@@ -134,7 +133,6 @@ static struct irq_chip omap_irq_chip = {
.ack = omap_mask_ack_irq,
.mask = omap_mask_irq,
.unmask = omap_unmask_irq,
- .disable = omap_mask_irq,
};
static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
@@ -157,6 +155,22 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
}
+int omap_irq_pending(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
+ struct omap_irq_bank *bank = irq_banks + i;
+ int irq;
+
+ for (irq = 0; irq < bank->nr_irqs; irq += 32)
+ if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 +
+ ((irq >> 5) << 5)))
+ return 1;
+ }
+ return 0;
+}
+
void __init omap_init_irq(void)
{
unsigned long nr_of_irqs = 0;
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index dc40b3e..9756a87 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -16,8 +16,8 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
-#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/consumer.h>
#include <mach/hardware.h>
#include <mach/control.h>
@@ -26,31 +26,9 @@
#include "mmc-twl4030.h"
-#if defined(CONFIG_TWL4030_CORE) && \
- (defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
-#define LDO_CLR 0x00
-#define VSEL_S2_CLR 0x40
-
-#define VMMC1_DEV_GRP 0x27
-#define VMMC1_CLR 0x00
-#define VMMC1_315V 0x03
-#define VMMC1_300V 0x02
-#define VMMC1_285V 0x01
-#define VMMC1_185V 0x00
-#define VMMC1_DEDICATED 0x2A
-
-#define VMMC2_DEV_GRP 0x2B
-#define VMMC2_CLR 0x40
-#define VMMC2_315V 0x0c
-#define VMMC2_300V 0x0b
-#define VMMC2_285V 0x0a
-#define VMMC2_280V 0x09
-#define VMMC2_260V 0x08
-#define VMMC2_185V 0x06
-#define VMMC2_DEDICATED 0x2E
-
-#define VMMC_DEV_GRP_P1 0x20
+#if defined(CONFIG_REGULATOR) && \
+ (defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
static u16 control_pbias_offset;
static u16 control_devconf1_offset;
@@ -59,19 +37,16 @@ static u16 control_devconf1_offset;
static struct twl_mmc_controller {
struct omap_mmc_platform_data *mmc;
- u8 twl_vmmc_dev_grp;
- u8 twl_mmc_dedicated;
- char name[HSMMC_NAME_LEN + 1];
-} hsmmc[OMAP34XX_NR_MMC] = {
- {
- .twl_vmmc_dev_grp = VMMC1_DEV_GRP,
- .twl_mmc_dedicated = VMMC1_DEDICATED,
- },
- {
- .twl_vmmc_dev_grp = VMMC2_DEV_GRP,
- .twl_mmc_dedicated = VMMC2_DEDICATED,
- },
-};
+ /* Vcc == configured supply
+ * Vcc_alt == optional
+ * - MMC1, supply for DAT4..DAT7
+ * - MMC2/MMC2, external level shifter voltage supply, for
+ * chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
+ */
+ struct regulator *vcc;
+ struct regulator *vcc_aux;
+ char name[HSMMC_NAME_LEN + 1];
+} hsmmc[OMAP34XX_NR_MMC];
static int twl_mmc_card_detect(int irq)
{
@@ -117,16 +92,60 @@ static int twl_mmc_late_init(struct device *dev)
int ret = 0;
int i;
- ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
- if (ret)
- goto done;
- ret = gpio_direction_input(mmc->slots[0].switch_pin);
- if (ret)
- goto err;
+ /* MMC/SD/SDIO doesn't require a card detect switch */
+ if (gpio_is_valid(mmc->slots[0].switch_pin)) {
+ ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
+ if (ret)
+ goto done;
+ ret = gpio_direction_input(mmc->slots[0].switch_pin);
+ if (ret)
+ goto err;
+ }
+ /* require at least main regulator */
for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
if (hsmmc[i].name == mmc->slots[0].name) {
+ struct regulator *reg;
+
hsmmc[i].mmc = mmc;
+
+ reg = regulator_get(dev, "vmmc");
+ if (IS_ERR(reg)) {
+ dev_dbg(dev, "vmmc regulator missing\n");
+ /* HACK: until fixed.c regulator is usable,
+ * we don't require a main regulator
+ * for MMC2 or MMC3
+ */
+ if (i != 0)
+ break;
+ ret = PTR_ERR(reg);
+ goto err;
+ }
+ hsmmc[i].vcc = reg;
+ mmc->slots[0].ocr_mask = mmc_regulator_get_ocrmask(reg);
+
+ /* allow an aux regulator */
+ reg = regulator_get(dev, "vmmc_aux");
+ hsmmc[i].vcc_aux = IS_ERR(reg) ? NULL : reg;
+
+ /* UGLY HACK: workaround regulator framework bugs.
+ * When the bootloader leaves a supply active, it's
+ * initialized with zero usecount ... and we can't
+ * disable it without first enabling it. Until the
+ * framework is fixed, we need a workaround like this
+ * (which is safe for MMC, but not in general).
+ */
+ if (regulator_is_enabled(hsmmc[i].vcc) > 0) {
+ regulator_enable(hsmmc[i].vcc);
+ regulator_disable(hsmmc[i].vcc);
+ }
+ if (hsmmc[i].vcc_aux) {
+ if (regulator_is_enabled(reg) > 0) {
+ regulator_enable(reg);
+ regulator_disable(reg);
+ }
+ }
+
break;
}
}
@@ -173,96 +192,6 @@ static int twl_mmc_resume(struct device *dev, int slot)
#define twl_mmc_resume NULL
#endif
-/*
- * Sets the MMC voltage in twl4030
- */
-
-#define MMC1_OCR (MMC_VDD_165_195 \
- |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-#define MMC2_OCR (MMC_VDD_165_195 \
- |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \
- |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-
-static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
-{
- int ret;
- u8 vmmc = 0, dev_grp_val;
-
- if (!vdd)
- goto doit;
-
- if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) {
- /* VMMC1: max 220 mA. And for 8-bit mode,
- * VSIM: max 50 mA
- */
- switch (1 << vdd) {
- case MMC_VDD_165_195:
- vmmc = VMMC1_185V;
- /* and VSIM_180V */
- break;
- case MMC_VDD_28_29:
- vmmc = VMMC1_285V;
- /* and VSIM_280V */
- break;
- case MMC_VDD_29_30:
- case MMC_VDD_30_31:
- vmmc = VMMC1_300V;
- /* and VSIM_300V */
- break;
- case MMC_VDD_31_32:
- vmmc = VMMC1_315V;
- /* error if VSIM needed */
- break;
- default:
- return -EINVAL;
- }
- } else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) {
- /* VMMC2: max 100 mA */
- switch (1 << vdd) {
- case MMC_VDD_165_195:
- vmmc = VMMC2_185V;
- break;
- case MMC_VDD_25_26:
- case MMC_VDD_26_27:
- vmmc = VMMC2_260V;
- break;
- case MMC_VDD_27_28:
- vmmc = VMMC2_280V;
- break;
- case MMC_VDD_28_29:
- vmmc = VMMC2_285V;
- break;
- case MMC_VDD_29_30:
- case MMC_VDD_30_31:
- vmmc = VMMC2_300V;
- break;
- case MMC_VDD_31_32:
- vmmc = VMMC2_315V;
- break;
- default:
- return -EINVAL;
- }
- } else {
- return -EINVAL;
- }
-
-doit:
- if (vdd)
- dev_grp_val = VMMC_DEV_GRP_P1; /* Power up */
- else
- dev_grp_val = LDO_CLR; /* Power down */
-
- ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
- dev_grp_val, c->twl_vmmc_dev_grp);
- if (ret || !vdd)
- return ret;
-
- ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
- vmmc, c->twl_mmc_dedicated);
-
- return ret;
-}
-
static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
@@ -273,11 +202,13 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
/*
* Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
- * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both
+ * card with Vcc regulator (from twl4030 or whatever). OMAP has both
* 1.8V and 3.0V modes, controlled by the PBIAS register.
*
* In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
* is most naturally TWL VSIM; those pins also use PBIAS.
+ *
+ * FIXME handle VMMC1A as needed ...
*/
if (power_on) {
if (cpu_is_omap2430()) {
@@ -300,7 +231,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
- ret = twl_mmc_set_voltage(c, vdd);
+ ret = mmc_regulator_set_ocr(c->vcc, vdd);
/* 100ms delay required for PBIAS configuration */
msleep(100);
@@ -316,7 +247,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
- ret = twl_mmc_set_voltage(c, 0);
+ ret = mmc_regulator_set_ocr(c->vcc, 0);
/* 100ms delay required for PBIAS configuration */
msleep(100);
@@ -329,19 +260,33 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
return ret;
}
-static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd)
+static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
{
- int ret;
+ int ret = 0;
struct twl_mmc_controller *c = &hsmmc[1];
struct omap_mmc_platform_data *mmc = dev->platform_data;
+ /* If we don't see a Vcc regulator, assume it's a fixed
+ * voltage always-on regulator.
+ */
+ if (!c->vcc)
+ return 0;
+
/*
- * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP
+ * Assume Vcc regulator is used only to power the card ... OMAP
* VDDS is used to power the pins, optionally with a transceiver to
* support cards using voltages other than VDDS (1.8V nominal). When a
* transceiver is used, DAT3..7 are muxed as transceiver control pins.
+ *
+ * In some cases this regulator won't support enable/disable;
+ * e.g. it's a fixed rail for a WLAN chip.
+ *
+ * In other cases vcc_aux switches interface power. Example, for
+ * eMMC cards it represents VccQ. Sometimes transceivers or SDIO
+ * chips/cards need an interface voltage rail too.
*/
if (power_on) {
+ /* only MMC2 supports a CLKIN */
if (mmc->slots[0].internal_clock) {
u32 reg;
@@ -349,24 +294,23 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, control_devconf1_offset);
}
- ret = twl_mmc_set_voltage(c, vdd);
+ ret = mmc_regulator_set_ocr(c->vcc, vdd);
+ /* enable interface voltage rail, if needed */
+ if (ret == 0 && c->vcc_aux) {
+ ret = regulator_enable(c->vcc_aux);
+ if (ret < 0)
+ ret = mmc_regulator_set_ocr(c->vcc, 0);
+ }
} else {
- ret = twl_mmc_set_voltage(c, 0);
+ if (c->vcc_aux && (ret = regulator_is_enabled(c->vcc_aux)) > 0)
+ ret = regulator_disable(c->vcc_aux);
+ if (ret == 0)
+ ret = mmc_regulator_set_ocr(c->vcc, 0);
}
return ret;
}
-static int twl_mmc3_set_power(struct device *dev, int slot, int power_on,
- int vdd)
-{
- /*
- * Assume MMC3 has self-powered device connected, for example on-board
- * chip with external power source.
- */
- return 0;
-}
-
static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
@@ -412,10 +356,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
mmc->slots[0].wires = c->wires;
mmc->slots[0].internal_clock = !c->ext_clock;
mmc->dma_mask = 0xffffffff;
+ mmc->init = twl_mmc_late_init;
- /* note: twl4030 card detect GPIOs normally switch VMMCx ... */
+ /* note: twl4030 card detect GPIOs can disable VMMCx ... */
if (gpio_is_valid(c->gpio_cd)) {
- mmc->init = twl_mmc_late_init;
mmc->cleanup = twl_mmc_cleanup;
mmc->suspend = twl_mmc_suspend;
mmc->resume = twl_mmc_resume;
@@ -439,26 +383,28 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
} else
mmc->slots[0].gpio_wp = -EINVAL;
- /* NOTE: we assume OMAP's MMC1 and MMC2 use
- * the TWL4030's VMMC1 and VMMC2, respectively;
- * and that MMC3 device has it's own power source.
+ /* NOTE: MMC slots should have a Vcc regulator set up.
+ * This may be from a TWL4030-family chip, another
+ * controllable regulator, or a fixed supply.
+ *
+ * temporary HACK: ocr_mask instead of fixed supply
*/
+ mmc->slots[0].ocr_mask = c->ocr_mask;
switch (c->mmc) {
case 1:
+ /* on-chip level shifting via PBIAS0/PBIAS1 */
mmc->slots[0].set_power = twl_mmc1_set_power;
- mmc->slots[0].ocr_mask = MMC1_OCR;
break;
case 2:
- mmc->slots[0].set_power = twl_mmc2_set_power;
- if (c->transceiver)
- mmc->slots[0].ocr_mask = MMC2_OCR;
- else
- mmc->slots[0].ocr_mask = MMC_VDD_165_195;
- break;
+ if (c->ext_clock)
+ c->transceiver = 1;
+ if (c->transceiver && c->wires > 4)
+ c->wires = 4;
+ /* FALLTHROUGH */
case 3:
- mmc->slots[0].set_power = twl_mmc3_set_power;
- mmc->slots[0].ocr_mask = MMC_VDD_165_195;
+ /* off-chip level shifting, or none */
+ mmc->slots[0].set_power = twl_mmc23_set_power;
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index ea59e86..3807c45 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -16,9 +16,10 @@ struct twl4030_hsmmc_info {
int gpio_wp; /* or -EINVAL */
char *name; /* or NULL for default */
struct device *dev; /* returned: pointer to mmc adapter */
+ int ocr_mask; /* temporary HACK */
};
-#if defined(CONFIG_TWL4030_CORE) && \
+#if defined(CONFIG_REGULATOR) && \
(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
new file mode 100644
index 0000000..4afadba
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -0,0 +1,46 @@
+/*
+ * Secondary CPU startup routine source file.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Interface functions needed for the SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2003 ARM Limited.
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+/* Physical address needed since MMU not enabled yet on secondary core */
+#define OMAP4_AUX_CORE_BOOT1_PA 0x48281804
+
+ __INIT
+
+/*
+ * OMAP4 specific entry point for secondary CPU to jump from ROM
+ * code. This routine also provides a holding flag into which
+ * secondary core is held until we're ready for it to initialise.
+ * The primary core will update the this flag using a hardware
+ * register AuxCoreBoot1.
+ */
+ENTRY(omap_secondary_startup)
+ mrc p15, 0, r0, c0, c0, 5
+ and r0, r0, #0x0f
+hold: ldr r1, =OMAP4_AUX_CORE_BOOT1_PA @ read from AuxCoreBoot1
+ ldr r2, [r1]
+ cmp r2, r0
+ bne hold
+
+ /*
+ * we've been released from the cpu_release,secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
new file mode 100644
index 0000000..8fe8d23
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -0,0 +1,178 @@
+/*
+ * OMAP4 SMP source file. It contains platform specific fucntions
+ * needed for the linux smp kernel.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Platform file needed for the OMAP4 SMP. This file is based on arm
+ * realview smp platform.
+ * * Copyright (c) 2002 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+
+/* Registers used for communicating startup information */
+#define OMAP4_AUXCOREBOOT_REG0 (OMAP44XX_VA_WKUPGEN_BASE + 0x800)
+#define OMAP4_AUXCOREBOOT_REG1 (OMAP44XX_VA_WKUPGEN_BASE + 0x804)
+
+/* SCU base address */
+static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE;
+
+/*
+ * Use SCU config register to count number of cores
+ */
+static inline unsigned int get_core_count(void)
+{
+ if (scu_base)
+ return scu_get_core_count(scu_base);
+ return 1;
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ trace_hardirqs_off();
+
+ /*
+ * If any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+
+ gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+
+ /*
+ * Set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * Update the AuxCoreBoot1 with boot state for secondary core.
+ * omap_secondary_startup() routine will hold the secondary core till
+ * the AuxCoreBoot1 register is updated with cpu state
+ * A barrier is added to ensure that write buffer is drained
+ */
+ __raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1);
+ smp_wmb();
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout))
+ ;
+
+ /*
+ * Now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return 0;
+}
+
+static void __init wakeup_secondary(void)
+{
+ /*
+ * Write the address of secondary startup routine into the
+ * AuxCoreBoot0 where ROM code will jump and start executing
+ * on secondary core once out of WFE
+ * A barrier is added to ensure that write buffer is drained
+ */
+ __raw_writel(virt_to_phys(omap_secondary_startup), \
+ OMAP4_AUXCOREBOOT_REG0);
+ smp_wmb();
+
+ /*
+ * Send a 'sev' to wake the secondary core from WFE.
+ */
+ set_event();
+ mb();
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+ unsigned int i, ncores = get_core_count();
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+ unsigned int ncores = get_core_count();
+ unsigned int cpu = smp_processor_id();
+ int i;
+
+ /* sanity check */
+ if (ncores == 0) {
+ printk(KERN_ERR
+ "OMAP4: strange core count of 0? Default to 1\n");
+ ncores = 1;
+ }
+
+ if (ncores > NR_CPUS) {
+ printk(KERN_WARNING
+ "OMAP4: no. of cores (%d) greater than configured "
+ "maximum of %d - clipping\n",
+ ncores, NR_CPUS);
+ ncores = NR_CPUS;
+ }
+ smp_store_cpu_info(cpu);
+
+ /*
+ * are we trying to boot more cores than exist?
+ */
+ if (max_cpus > ncores)
+ max_cpus = ncores;
+
+ /*
+ * Initialise the present map, which describes the set of CPUs
+ * actually populated at the present time.
+ */
+ for (i = 0; i < max_cpus; i++)
+ set_cpu_present(i, true);
+
+ if (max_cpus > 1) {
+ /*
+ * Enable the local timer or broadcast device for the
+ * boot CPU, but only if we have more than one CPU.
+ */
+ percpu_timer_setup();
+
+ /*
+ * Initialise the SCU and wake up the secondary core using
+ * wakeup_secondary().
+ */
+ scu_enable(scu_base);
+ wakeup_secondary();
+ }
+}
diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c
new file mode 100644
index 0000000..194189c
--- /dev/null
+++ b/arch/arm/mach-omap2/omap3-iommu.c
@@ -0,0 +1,105 @@
+/*
+ * omap iommu: omap3 device registration
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/iommu.h>
+
+#define OMAP3_MMU1_BASE 0x480bd400
+#define OMAP3_MMU2_BASE 0x5d000000
+#define OMAP3_MMU1_IRQ 24
+#define OMAP3_MMU2_IRQ 28
+
+
+static unsigned long iommu_base[] __initdata = {
+ OMAP3_MMU1_BASE,
+ OMAP3_MMU2_BASE,
+};
+
+static int iommu_irq[] __initdata = {
+ OMAP3_MMU1_IRQ,
+ OMAP3_MMU2_IRQ,
+};
+
+static const struct iommu_platform_data omap3_iommu_pdata[] __initconst = {
+ {
+ .name = "isp",
+ .nr_tlb_entries = 8,
+ .clk_name = "cam_ick",
+ },
+#if defined(CONFIG_MPU_BRIDGE_IOMMU)
+ {
+ .name = "iva2",
+ .nr_tlb_entries = 32,
+ .clk_name = "iva2_ck",
+ },
+#endif
+};
+#define NR_IOMMU_DEVICES ARRAY_SIZE(omap3_iommu_pdata)
+
+static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES];
+
+static int __init omap3_iommu_init(void)
+{
+ int i, err;
+
+ for (i = 0; i < NR_IOMMU_DEVICES; i++) {
+ struct platform_device *pdev;
+ struct resource res[2];
+
+ pdev = platform_device_alloc("omap-iommu", i);
+ if (!pdev) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ memset(res, 0, sizeof(res));
+ res[0].start = iommu_base[i];
+ res[0].end = iommu_base[i] + MMU_REG_SIZE - 1;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = res[1].end = iommu_irq[i];
+ res[1].flags = IORESOURCE_IRQ;
+
+ err = platform_device_add_resources(pdev, res,
+ ARRAY_SIZE(res));
+ if (err)
+ goto err_out;
+ err = platform_device_add_data(pdev, &omap3_iommu_pdata[i],
+ sizeof(omap3_iommu_pdata[0]));
+ if (err)
+ goto err_out;
+ err = platform_device_add(pdev);
+ if (err)
+ goto err_out;
+ omap3_iommu_pdev[i] = pdev;
+ }
+ return 0;
+
+err_out:
+ while (i--)
+ platform_device_put(omap3_iommu_pdev[i]);
+ return err;
+}
+module_init(omap3_iommu_init);
+
+static void __exit omap3_iommu_exit(void)
+{
+ int i;
+
+ for (i = 0; i < NR_IOMMU_DEVICES; i++)
+ platform_device_unregister(omap3_iommu_pdev[i]);
+}
+module_exit(omap3_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU");
+MODULE_DESCRIPTION("omap iommu: omap3 device registration");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
new file mode 100644
index 0000000..6cc375a
--- /dev/null
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -0,0 +1,152 @@
+/*
+ * OMAP Power Management debug routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ * Jouni Hogander
+ *
+ * Based on pm.c for omap2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "cm.h"
+#include "pm.h"
+
+int omap2_pm_debug;
+
+#define DUMP_PRM_MOD_REG(mod, reg) \
+ regs[reg_count].name = #mod "." #reg; \
+ regs[reg_count++].val = prm_read_mod_reg(mod, reg)
+#define DUMP_CM_MOD_REG(mod, reg) \
+ regs[reg_count].name = #mod "." #reg; \
+ regs[reg_count++].val = cm_read_mod_reg(mod, reg)
+#define DUMP_PRM_REG(reg) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_CM_REG(reg) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_INTC_REG(reg, off) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
+
+void omap2_pm_dump(int mode, int resume, unsigned int us)
+{
+ struct reg {
+ const char *name;
+ u32 val;
+ } regs[32];
+ int reg_count = 0, i;
+ const char *s1 = NULL, *s2 = NULL;
+
+ if (!resume) {
+#if 0
+ /* MPU */
+ DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
+ DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL);
+ DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL);
+ DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST);
+ DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
+#endif
+#if 0
+ /* INTC */
+ DUMP_INTC_REG(INTC_MIR0, 0x0084);
+ DUMP_INTC_REG(INTC_MIR1, 0x00a4);
+ DUMP_INTC_REG(INTC_MIR2, 0x00c4);
+#endif
+#if 0
+ DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
+ if (cpu_is_omap24xx()) {
+ DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+ DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+ OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
+ DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+ OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
+ }
+ DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
+ DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
+ DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
+ DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
+ DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
+ DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
+ DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST);
+#endif
+#if 0
+ /* DSP */
+ if (cpu_is_omap24xx()) {
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST);
+ }
+#endif
+ } else {
+ DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
+ if (cpu_is_omap24xx())
+ DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
+ DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
+ DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+#if 1
+ DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
+ DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
+ DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
+#endif
+ }
+
+ switch (mode) {
+ case 0:
+ s1 = "full";
+ s2 = "retention";
+ break;
+ case 1:
+ s1 = "MPU";
+ s2 = "retention";
+ break;
+ case 2:
+ s1 = "MPU";
+ s2 = "idle";
+ break;
+ }
+
+ if (!resume)
+#ifdef CONFIG_NO_HZ
+ printk(KERN_INFO
+ "--- Going to %s %s (next timer after %u ms)\n", s1, s2,
+ jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
+ jiffies));
+#else
+ printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
+#endif
+ else
+ printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
+ us / 1000, us % 1000);
+
+ for (i = 0; i < reg_count; i++)
+ printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
+}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
deleted file mode 100644
index ea8ceae..0000000
--- a/arch/arm/mach-omap2/pm.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/pm.c
- *
- * OMAP2 Power Management Routines
- *
- * Copyright (C) 2006 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Based on pm.c for omap1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/atomic.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/pm.h>
-
-static struct clk *vclk;
-static void (*omap2_sram_idle)(void);
-static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
-static void (*saved_idle)(void);
-
-extern void __init pmdomain_init(void);
-extern void pmdomain_set_autoidle(void);
-
-static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
-
-void omap2_pm_idle(void)
-{
- local_irq_disable();
- local_fiq_disable();
- if (need_resched()) {
- local_fiq_enable();
- local_irq_enable();
- return;
- }
-
- omap2_sram_idle();
- local_fiq_enable();
- local_irq_enable();
-}
-
-static int omap2_pm_prepare(void)
-{
- /* We cannot sleep in idle until we have resumed */
- saved_idle = pm_idle;
- pm_idle = NULL;
- return 0;
-}
-
-static int omap2_pm_suspend(void)
-{
- return 0;
-}
-
-static int omap2_pm_enter(suspend_state_t state)
-{
- int ret = 0;
-
- switch (state)
- {
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- ret = omap2_pm_suspend();
- break;
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-static void omap2_pm_finish(void)
-{
- pm_idle = saved_idle;
-}
-
-static struct platform_suspend_ops omap_pm_ops = {
- .prepare = omap2_pm_prepare,
- .enter = omap2_pm_enter,
- .finish = omap2_pm_finish,
- .valid = suspend_valid_only_mem,
-};
-
-static int __init omap2_pm_init(void)
-{
- return 0;
-}
-
-__initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
new file mode 100644
index 0000000..f7b3baf
--- /dev/null
+++ b/arch/arm/mach-omap2/pm.h
@@ -0,0 +1,38 @@
+/*
+ * OMAP2/3 Power Management Routines
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Jouni Hogander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
+#define __ARCH_ARM_MACH_OMAP2_PM_H
+
+extern int omap2_pm_init(void);
+extern int omap3_pm_init(void);
+
+#ifdef CONFIG_PM_DEBUG
+extern void omap2_pm_dump(int mode, int resume, unsigned int us);
+extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us) do {} while (0);
+#define omap2_pm_debug 0
+#endif /* CONFIG_PM_DEBUG */
+
+extern void omap24xx_idle_loop_suspend(void);
+
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
+ void __iomem *sdrc_power);
+extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
+extern void save_secure_ram_context(u32 *addr);
+
+extern unsigned int omap24xx_idle_loop_suspend_sz;
+extern unsigned int omap34xx_suspend_sz;
+extern unsigned int save_secure_ram_context_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap34xx_cpu_suspend_sz;
+
+#endif
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
new file mode 100644
index 0000000..db10255
--- /dev/null
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -0,0 +1,549 @@
+/*
+ * OMAP2 Power Management Routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/suspend.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/time.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+#include "pm.h"
+
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
+
+static void (*omap2_sram_idle)(void);
+static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
+ void __iomem *sdrc_power);
+
+static struct powerdomain *mpu_pwrdm;
+static struct powerdomain *core_pwrdm;
+
+static struct clockdomain *dsp_clkdm;
+static struct clockdomain *gfx_clkdm;
+
+static struct clk *osc_ck, *emul_ck;
+
+static int omap2_fclks_active(void)
+{
+ u32 f1, f2;
+
+ f1 = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+
+ /* Ignore UART clocks. These are handled by UART core (serial.c) */
+ f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2);
+ f2 &= ~OMAP24XX_EN_UART3;
+
+ if (f1 | f2)
+ return 1;
+ return 0;
+}
+
+static void omap2_enter_full_retention(void)
+{
+ u32 l;
+ struct timespec ts_preidle, ts_postidle, ts_idle;
+
+ /* There is 1 reference hold for all children of the oscillator
+ * clock, the following will remove it. If no one else uses the
+ * oscillator itself it will be disabled if/when we enter retention
+ * mode.
+ */
+ clk_disable(osc_ck);
+
+ /* Clear old wake-up events */
+ /* REVISIT: These write to reserved bits? */
+ prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+ prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+ /*
+ * Set MPU powerdomain's next power state to RETENTION;
+ * preserve logic state during retention
+ */
+ pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+ /* Workaround to kill USB */
+ l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
+ omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
+
+ omap2_gpio_prepare_for_retention();
+
+ if (omap2_pm_debug) {
+ omap2_pm_dump(0, 0, 0);
+ getnstimeofday(&ts_preidle);
+ }
+
+ /* One last check for pending IRQs to avoid extra latency due
+ * to sleeping unnecessarily. */
+ if (omap_irq_pending())
+ goto no_sleep;
+
+ omap_uart_prepare_idle(0);
+ omap_uart_prepare_idle(1);
+ omap_uart_prepare_idle(2);
+
+ /* Jump to SRAM suspend code */
+ omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
+ OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
+ OMAP_SDRC_REGADDR(SDRC_POWER));
+
+ omap_uart_resume_idle(2);
+ omap_uart_resume_idle(1);
+ omap_uart_resume_idle(0);
+
+no_sleep:
+ if (omap2_pm_debug) {
+ unsigned long long tmp;
+
+ getnstimeofday(&ts_postidle);
+ ts_idle = timespec_sub(ts_postidle, ts_preidle);
+ tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+ omap2_pm_dump(0, 1, tmp);
+ }
+ omap2_gpio_resume_after_retention();
+
+ clk_enable(osc_ck);
+
+ /* clear CORE wake-up events */
+ prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+
+ /* wakeup domain events - bit 1: GPT1, bit5 GPIO */
+ prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
+
+ /* MPU domain wake events */
+ l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ if (l & 0x01)
+ prm_write_mod_reg(0x01, OCP_MOD,
+ OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ if (l & 0x20)
+ prm_write_mod_reg(0x20, OCP_MOD,
+ OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+
+ /* Mask future PRCM-to-MPU interrupts */
+ prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+}
+
+static int omap2_i2c_active(void)
+{
+ u32 l;
+
+ l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1);
+}
+
+static int sti_console_enabled;
+
+static int omap2_allow_mpu_retention(void)
+{
+ u32 l;
+
+ /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
+ l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 |
+ OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 |
+ OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1))
+ return 0;
+ /* Check for UART3. */
+ l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+ if (l & OMAP24XX_EN_UART3)
+ return 0;
+ if (sti_console_enabled)
+ return 0;
+
+ return 1;
+}
+
+static void omap2_enter_mpu_retention(void)
+{
+ int only_idle = 0;
+ struct timespec ts_preidle, ts_postidle, ts_idle;
+
+ /* Putting MPU into the WFI state while a transfer is active
+ * seems to cause the I2C block to timeout. Why? Good question. */
+ if (omap2_i2c_active())
+ return;
+
+ /* The peripherals seem not to be able to wake up the MPU when
+ * it is in retention mode. */
+ if (omap2_allow_mpu_retention()) {
+ /* REVISIT: These write to reserved bits? */
+ prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+ prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+ /* Try to enter MPU retention */
+ prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
+ OMAP_LOGICRETSTATE,
+ MPU_MOD, PM_PWSTCTRL);
+ } else {
+ /* Block MPU retention */
+
+ prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, PM_PWSTCTRL);
+ only_idle = 1;
+ }
+
+ if (omap2_pm_debug) {
+ omap2_pm_dump(only_idle ? 2 : 1, 0, 0);
+ getnstimeofday(&ts_preidle);
+ }
+
+ omap2_sram_idle();
+
+ if (omap2_pm_debug) {
+ unsigned long long tmp;
+
+ getnstimeofday(&ts_postidle);
+ ts_idle = timespec_sub(ts_postidle, ts_preidle);
+ tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+ omap2_pm_dump(only_idle ? 2 : 1, 1, tmp);
+ }
+}
+
+static int omap2_can_sleep(void)
+{
+ if (omap2_fclks_active())
+ return 0;
+ if (osc_ck->usecount > 1)
+ return 0;
+ if (omap_dma_running())
+ return 0;
+
+ return 1;
+}
+
+static void omap2_pm_idle(void)
+{
+ local_irq_disable();
+ local_fiq_disable();
+
+ if (!omap2_can_sleep()) {
+ if (omap_irq_pending())
+ goto out;
+ omap2_enter_mpu_retention();
+ goto out;
+ }
+
+ if (omap_irq_pending())
+ goto out;
+
+ omap2_enter_full_retention();
+
+out:
+ local_fiq_enable();
+ local_irq_enable();
+}
+
+static int omap2_pm_prepare(void)
+{
+ /* We cannot sleep in idle until we have resumed */
+ disable_hlt();
+ return 0;
+}
+
+static int omap2_pm_suspend(void)
+{
+ u32 wken_wkup, mir1;
+
+ wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+ prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN);
+
+ /* Mask GPT1 */
+ mir1 = omap_readl(0x480fe0a4);
+ omap_writel(1 << 5, 0x480fe0ac);
+
+ omap_uart_prepare_suspend();
+ omap2_enter_full_retention();
+
+ omap_writel(mir1, 0x480fe0a4);
+ prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
+
+ return 0;
+}
+
+static int omap2_pm_enter(suspend_state_t state)
+{
+ int ret = 0;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ ret = omap2_pm_suspend();
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void omap2_pm_finish(void)
+{
+ enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+ .prepare = omap2_pm_prepare,
+ .enter = omap2_pm_enter,
+ .finish = omap2_pm_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm)
+{
+ omap2_clkdm_allow_idle(clkdm);
+ return 0;
+}
+
+static void __init prcm_setup_regs(void)
+{
+ int i, num_mem_banks;
+ struct powerdomain *pwrdm;
+
+ /* Enable autoidle */
+ prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD,
+ OMAP2_PRCM_SYSCONFIG_OFFSET);
+
+ /* Set all domain wakeup dependencies */
+ prm_write_mod_reg(OMAP_EN_WKUP_MASK, MPU_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP24XX_DSP_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, CORE_MOD, PM_WKDEP);
+ if (cpu_is_omap2430())
+ prm_write_mod_reg(0, OMAP2430_MDM_MOD, PM_WKDEP);
+
+ /*
+ * Set CORE powerdomain memory banks to retain their contents
+ * during RETENTION
+ */
+ num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm);
+ for (i = 0; i < num_mem_banks; i++)
+ pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
+
+ /* Set CORE powerdomain's next power state to RETENTION */
+ pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
+
+ /*
+ * Set MPU powerdomain's next power state to RETENTION;
+ * preserve logic state during retention
+ */
+ pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+ /* Force-power down DSP, GFX powerdomains */
+
+ pwrdm = clkdm_get_pwrdm(dsp_clkdm);
+ pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+ omap2_clkdm_sleep(dsp_clkdm);
+
+ pwrdm = clkdm_get_pwrdm(gfx_clkdm);
+ pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+ omap2_clkdm_sleep(gfx_clkdm);
+
+ /* Enable clockdomain hardware-supervised control for all clkdms */
+ clkdm_for_each(_pm_clkdm_enable_hwsup);
+
+ /* Enable clock autoidle for all domains */
+ cm_write_mod_reg(OMAP24XX_AUTO_CAM |
+ OMAP24XX_AUTO_MAILBOXES |
+ OMAP24XX_AUTO_WDT4 |
+ OMAP2420_AUTO_WDT3 |
+ OMAP24XX_AUTO_MSPRO |
+ OMAP2420_AUTO_MMC |
+ OMAP24XX_AUTO_FAC |
+ OMAP2420_AUTO_EAC |
+ OMAP24XX_AUTO_HDQ |
+ OMAP24XX_AUTO_UART2 |
+ OMAP24XX_AUTO_UART1 |
+ OMAP24XX_AUTO_I2C2 |
+ OMAP24XX_AUTO_I2C1 |
+ OMAP24XX_AUTO_MCSPI2 |
+ OMAP24XX_AUTO_MCSPI1 |
+ OMAP24XX_AUTO_MCBSP2 |
+ OMAP24XX_AUTO_MCBSP1 |
+ OMAP24XX_AUTO_GPT12 |
+ OMAP24XX_AUTO_GPT11 |
+ OMAP24XX_AUTO_GPT10 |
+ OMAP24XX_AUTO_GPT9 |
+ OMAP24XX_AUTO_GPT8 |
+ OMAP24XX_AUTO_GPT7 |
+ OMAP24XX_AUTO_GPT6 |
+ OMAP24XX_AUTO_GPT5 |
+ OMAP24XX_AUTO_GPT4 |
+ OMAP24XX_AUTO_GPT3 |
+ OMAP24XX_AUTO_GPT2 |
+ OMAP2420_AUTO_VLYNQ |
+ OMAP24XX_AUTO_DSS,
+ CORE_MOD, CM_AUTOIDLE1);
+ cm_write_mod_reg(OMAP24XX_AUTO_UART3 |
+ OMAP24XX_AUTO_SSI |
+ OMAP24XX_AUTO_USB,
+ CORE_MOD, CM_AUTOIDLE2);
+ cm_write_mod_reg(OMAP24XX_AUTO_SDRC |
+ OMAP24XX_AUTO_GPMC |
+ OMAP24XX_AUTO_SDMA,
+ CORE_MOD, CM_AUTOIDLE3);
+ cm_write_mod_reg(OMAP24XX_AUTO_PKA |
+ OMAP24XX_AUTO_AES |
+ OMAP24XX_AUTO_RNG |
+ OMAP24XX_AUTO_SHA |
+ OMAP24XX_AUTO_DES,
+ CORE_MOD, OMAP24XX_CM_AUTOIDLE4);
+
+ cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+
+ /* Put DPLL and both APLLs into autoidle mode */
+ cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) |
+ (0x03 << OMAP24XX_AUTO_96M_SHIFT) |
+ (0x03 << OMAP24XX_AUTO_54M_SHIFT),
+ PLL_MOD, CM_AUTOIDLE);
+
+ cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL |
+ OMAP24XX_AUTO_WDT1 |
+ OMAP24XX_AUTO_MPU_WDT |
+ OMAP24XX_AUTO_GPIOS |
+ OMAP24XX_AUTO_32KSYNC |
+ OMAP24XX_AUTO_GPT1,
+ WKUP_MOD, CM_AUTOIDLE);
+
+ /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
+ * stabilisation */
+ prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+ OMAP2_PRCM_CLKSSETUP_OFFSET);
+
+ /* Configure automatic voltage transition */
+ prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+ OMAP2_PRCM_VOLTSETUP_OFFSET);
+ prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT |
+ (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
+ OMAP24XX_MEMRETCTRL |
+ (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
+ (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
+ OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
+
+ /* Enable wake-up events */
+ prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1,
+ WKUP_MOD, PM_WKEN);
+}
+
+int __init omap2_pm_init(void)
+{
+ u32 l;
+
+ if (!cpu_is_omap24xx())
+ return -ENODEV;
+
+ printk(KERN_INFO "Power Management for OMAP2 initializing\n");
+ l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
+ printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
+
+ /* Look up important powerdomains, clockdomains */
+
+ mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+ if (!mpu_pwrdm)
+ pr_err("PM: mpu_pwrdm not found\n");
+
+ core_pwrdm = pwrdm_lookup("core_pwrdm");
+ if (!core_pwrdm)
+ pr_err("PM: core_pwrdm not found\n");
+
+ dsp_clkdm = clkdm_lookup("dsp_clkdm");
+ if (!dsp_clkdm)
+ pr_err("PM: mpu_clkdm not found\n");
+
+ gfx_clkdm = clkdm_lookup("gfx_clkdm");
+ if (!gfx_clkdm)
+ pr_err("PM: gfx_clkdm not found\n");
+
+
+ osc_ck = clk_get(NULL, "osc_ck");
+ if (IS_ERR(osc_ck)) {
+ printk(KERN_ERR "could not get osc_ck\n");
+ return -ENODEV;
+ }
+
+ if (cpu_is_omap242x()) {
+ emul_ck = clk_get(NULL, "emul_ck");
+ if (IS_ERR(emul_ck)) {
+ printk(KERN_ERR "could not get emul_ck\n");
+ clk_put(osc_ck);
+ return -ENODEV;
+ }
+ }
+
+ prcm_setup_regs();
+
+ /* Hack to prevent MPU retention when STI console is enabled. */
+ {
+ const struct omap_sti_console_config *sti;
+
+ sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
+ struct omap_sti_console_config);
+ if (sti != NULL && sti->enable)
+ sti_console_enabled = 1;
+ }
+
+ /*
+ * We copy the assembler sleep/wakeup routines to SRAM.
+ * These routines need to be in SRAM as that's the only
+ * memory the MPU can see when it wakes up.
+ */
+ if (cpu_is_omap24xx()) {
+ omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
+ omap24xx_idle_loop_suspend_sz);
+
+ omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
+ omap24xx_cpu_suspend_sz);
+ }
+
+ suspend_set_ops(&omap_pm_ops);
+ pm_idle = omap2_pm_idle;
+
+ return 0;
+}
+
+late_initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
new file mode 100644
index 0000000..841d4c5
--- /dev/null
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -0,0 +1,710 @@
+/*
+ * OMAP3 Power Management Routines
+ *
+ * Copyright (C) 2006-2008 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Jouni Hogander
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+
+#include <mach/sram.h>
+#include <mach/clockdomain.h>
+#include <mach/powerdomain.h>
+#include <mach/control.h>
+#include <mach/serial.h>
+
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+#include "prm.h"
+#include "pm.h"
+
+struct power_state {
+ struct powerdomain *pwrdm;
+ u32 next_state;
+ u32 saved_state;
+ struct list_head node;
+};
+
+static LIST_HEAD(pwrst_list);
+
+static void (*_omap_sram_idle)(u32 *addr, int save_state);
+
+static struct powerdomain *mpu_pwrdm;
+
+/* PRCM Interrupt Handler for wakeups */
+static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+{
+ u32 wkst, irqstatus_mpu;
+ u32 fclk, iclk;
+
+ /* WKUP */
+ wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
+ if (wkst) {
+ iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
+ fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
+ cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
+ cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
+ prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
+ while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
+ cpu_relax();
+ cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
+ cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
+ }
+
+ /* CORE */
+ wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
+ if (wkst) {
+ iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
+ fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
+ prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
+ while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
+ cpu_relax();
+ cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
+ cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
+ }
+ wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
+ if (wkst) {
+ iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
+ fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+ prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
+ while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
+ cpu_relax();
+ cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
+ cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+ }
+
+ /* PER */
+ wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
+ if (wkst) {
+ iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
+ fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
+ prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
+ while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
+ cpu_relax();
+ cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
+ cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
+ }
+
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ /* USBHOST */
+ wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
+ if (wkst) {
+ iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ CM_ICLKEN);
+ fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+ CM_ICLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
+ PM_WKST);
+ while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ PM_WKST))
+ cpu_relax();
+ cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
+ CM_ICLKEN);
+ cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ }
+ }
+
+ irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
+ cpu_relax();
+
+ return IRQ_HANDLED;
+}
+
+static void omap_sram_idle(void)
+{
+ /* Variable to tell what needs to be saved and restored
+ * in omap_sram_idle*/
+ /* save_state = 0 => Nothing to save and restored */
+ /* save_state = 1 => Only L1 and logic lost */
+ /* save_state = 2 => Only L2 lost */
+ /* save_state = 3 => L1, L2 and logic lost */
+ int save_state = 0, mpu_next_state;
+
+ if (!_omap_sram_idle)
+ return;
+
+ mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
+ switch (mpu_next_state) {
+ case PWRDM_POWER_RET:
+ /* No need to save context */
+ save_state = 0;
+ break;
+ default:
+ /* Invalid state */
+ printk(KERN_ERR "Invalid mpu state in sram_idle\n");
+ return;
+ }
+ omap2_gpio_prepare_for_retention();
+ omap_uart_prepare_idle(0);
+ omap_uart_prepare_idle(1);
+ omap_uart_prepare_idle(2);
+
+ _omap_sram_idle(NULL, save_state);
+ cpu_init();
+
+ omap_uart_resume_idle(2);
+ omap_uart_resume_idle(1);
+ omap_uart_resume_idle(0);
+ omap2_gpio_resume_after_retention();
+}
+
+/*
+ * Check if functional clocks are enabled before entering
+ * sleep. This function could be behind CONFIG_PM_DEBUG
+ * when all drivers are configuring their sysconfig registers
+ * properly and using their clocks properly.
+ */
+static int omap3_fclks_active(void)
+{
+ u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
+ fck_cam = 0, fck_per = 0, fck_usbhost = 0;
+
+ fck_core1 = cm_read_mod_reg(CORE_MOD,
+ CM_FCLKEN1);
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ fck_core3 = cm_read_mod_reg(CORE_MOD,
+ OMAP3430ES2_CM_FCLKEN3);
+ fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
+ CM_FCLKEN);
+ fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ } else
+ fck_sgx = cm_read_mod_reg(GFX_MOD,
+ OMAP3430ES2_CM_FCLKEN3);
+ fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
+ CM_FCLKEN);
+ fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
+ CM_FCLKEN);
+ fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
+ CM_FCLKEN);
+
+ /* Ignore UART clocks. These are handled by UART core (serial.c) */
+ fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2);
+ fck_per &= ~OMAP3430_EN_UART3;
+
+ if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
+ fck_cam | fck_per | fck_usbhost)
+ return 1;
+ return 0;
+}
+
+static int omap3_can_sleep(void)
+{
+ if (!omap_uart_can_sleep())
+ return 0;
+ if (omap3_fclks_active())
+ return 0;
+ return 1;
+}
+
+/* This sets pwrdm state (other than mpu & core. Currently only ON &
+ * RET are supported. Function is assuming that clkdm doesn't have
+ * hw_sup mode enabled. */
+static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+{
+ u32 cur_state;
+ int sleep_switch = 0;
+ int ret = 0;
+
+ if (pwrdm == NULL || IS_ERR(pwrdm))
+ return -EINVAL;
+
+ while (!(pwrdm->pwrsts & (1 << state))) {
+ if (state == PWRDM_POWER_OFF)
+ return ret;
+ state--;
+ }
+
+ cur_state = pwrdm_read_next_pwrst(pwrdm);
+ if (cur_state == state)
+ return ret;
+
+ if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
+ omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+ sleep_switch = 1;
+ pwrdm_wait_transition(pwrdm);
+ }
+
+ ret = pwrdm_set_next_pwrst(pwrdm, state);
+ if (ret) {
+ printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
+ pwrdm->name);
+ goto err;
+ }
+
+ if (sleep_switch) {
+ omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+ pwrdm_wait_transition(pwrdm);
+ }
+
+err:
+ return ret;
+}
+
+static void omap3_pm_idle(void)
+{
+ local_irq_disable();
+ local_fiq_disable();
+
+ if (!omap3_can_sleep())
+ goto out;
+
+ if (omap_irq_pending())
+ goto out;
+
+ omap_sram_idle();
+
+out:
+ local_fiq_enable();
+ local_irq_enable();
+}
+
+static int omap3_pm_prepare(void)
+{
+ disable_hlt();
+ return 0;
+}
+
+static int omap3_pm_suspend(void)
+{
+ struct power_state *pwrst;
+ int state, ret = 0;
+
+ /* Read current next_pwrsts */
+ list_for_each_entry(pwrst, &pwrst_list, node)
+ pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
+ /* Set ones wanted by suspend */
+ list_for_each_entry(pwrst, &pwrst_list, node) {
+ if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
+ goto restore;
+ if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
+ goto restore;
+ }
+
+ omap_uart_prepare_suspend();
+ omap_sram_idle();
+
+restore:
+ /* Restore next_pwrsts */
+ list_for_each_entry(pwrst, &pwrst_list, node) {
+ set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+ state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
+ if (state > pwrst->next_state) {
+ printk(KERN_INFO "Powerdomain (%s) didn't enter "
+ "target state %d\n",
+ pwrst->pwrdm->name, pwrst->next_state);
+ ret = -1;
+ }
+ }
+ if (ret)
+ printk(KERN_ERR "Could not enter target state in pm_suspend\n");
+ else
+ printk(KERN_INFO "Successfully put all powerdomains "
+ "to target state\n");
+
+ return ret;
+}
+
+static int omap3_pm_enter(suspend_state_t state)
+{
+ int ret = 0;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ ret = omap3_pm_suspend();
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void omap3_pm_finish(void)
+{
+ enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+ .prepare = omap3_pm_prepare,
+ .enter = omap3_pm_enter,
+ .finish = omap3_pm_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+
+/**
+ * omap3_iva_idle(): ensure IVA is in idle so it can be put into
+ * retention
+ *
+ * In cases where IVA2 is activated by bootcode, it may prevent
+ * full-chip retention or off-mode because it is not idle. This
+ * function forces the IVA2 into idle state so it can go
+ * into retention/off and thus allow full-chip retention/off.
+ *
+ **/
+static void __init omap3_iva_idle(void)
+{
+ /* ensure IVA2 clock is disabled */
+ cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* if no clock activity, nothing else to do */
+ if (!(cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
+ OMAP3430_CLKACTIVITY_IVA2_MASK))
+ return;
+
+ /* Reset IVA2 */
+ prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+ OMAP3430_RST2_IVA2 |
+ OMAP3430_RST3_IVA2,
+ OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+ /* Enable IVA2 clock */
+ cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2,
+ OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* Set IVA2 boot mode to 'idle' */
+ omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
+ OMAP343X_CONTROL_IVA2_BOOTMOD);
+
+ /* Un-reset IVA2 */
+ prm_write_mod_reg(0, OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+ /* Disable IVA2 clock */
+ cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* Reset IVA2 */
+ prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+ OMAP3430_RST2_IVA2 |
+ OMAP3430_RST3_IVA2,
+ OMAP3430_IVA2_MOD, RM_RSTCTRL);
+}
+
+static void __init omap3_d2d_idle(void)
+{
+ u16 mask, padconf;
+
+ /* In a stand alone OMAP3430 where there is not a stacked
+ * modem for the D2D Idle Ack and D2D MStandby must be pulled
+ * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
+ * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
+ mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
+ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
+ padconf |= mask;
+ omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
+
+ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
+ padconf |= mask;
+ omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+
+ /* reset modem */
+ prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON |
+ OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST,
+ CORE_MOD, RM_RSTCTRL);
+ prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL);
+}
+
+static void __init prcm_setup_regs(void)
+{
+ /* XXX Reset all wkdeps. This should be done when initializing
+ * powerdomains */
+ prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+ } else
+ prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+
+ /*
+ * Enable interface clock autoidle for all modules.
+ * Note that in the long run this should be done by clockfw
+ */
+ cm_write_mod_reg(
+ OMAP3430_AUTO_MODEM |
+ OMAP3430ES2_AUTO_MMC3 |
+ OMAP3430ES2_AUTO_ICR |
+ OMAP3430_AUTO_AES2 |
+ OMAP3430_AUTO_SHA12 |
+ OMAP3430_AUTO_DES2 |
+ OMAP3430_AUTO_MMC2 |
+ OMAP3430_AUTO_MMC1 |
+ OMAP3430_AUTO_MSPRO |
+ OMAP3430_AUTO_HDQ |
+ OMAP3430_AUTO_MCSPI4 |
+ OMAP3430_AUTO_MCSPI3 |
+ OMAP3430_AUTO_MCSPI2 |
+ OMAP3430_AUTO_MCSPI1 |
+ OMAP3430_AUTO_I2C3 |
+ OMAP3430_AUTO_I2C2 |
+ OMAP3430_AUTO_I2C1 |
+ OMAP3430_AUTO_UART2 |
+ OMAP3430_AUTO_UART1 |
+ OMAP3430_AUTO_GPT11 |
+ OMAP3430_AUTO_GPT10 |
+ OMAP3430_AUTO_MCBSP5 |
+ OMAP3430_AUTO_MCBSP1 |
+ OMAP3430ES1_AUTO_FAC | /* This is es1 only */
+ OMAP3430_AUTO_MAILBOXES |
+ OMAP3430_AUTO_OMAPCTRL |
+ OMAP3430ES1_AUTO_FSHOSTUSB |
+ OMAP3430_AUTO_HSOTGUSB |
+ OMAP3430_AUTO_SAD2D |
+ OMAP3430_AUTO_SSI,
+ CORE_MOD, CM_AUTOIDLE1);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_PKA |
+ OMAP3430_AUTO_AES1 |
+ OMAP3430_AUTO_RNG |
+ OMAP3430_AUTO_SHA11 |
+ OMAP3430_AUTO_DES1,
+ CORE_MOD, CM_AUTOIDLE2);
+
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ cm_write_mod_reg(
+ OMAP3430_AUTO_MAD2D |
+ OMAP3430ES2_AUTO_USBTLL,
+ CORE_MOD, CM_AUTOIDLE3);
+ }
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_WDT2 |
+ OMAP3430_AUTO_WDT1 |
+ OMAP3430_AUTO_GPIO1 |
+ OMAP3430_AUTO_32KSYNC |
+ OMAP3430_AUTO_GPT12 |
+ OMAP3430_AUTO_GPT1 ,
+ WKUP_MOD, CM_AUTOIDLE);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_DSS,
+ OMAP3430_DSS_MOD,
+ CM_AUTOIDLE);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_CAM,
+ OMAP3430_CAM_MOD,
+ CM_AUTOIDLE);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_GPIO6 |
+ OMAP3430_AUTO_GPIO5 |
+ OMAP3430_AUTO_GPIO4 |
+ OMAP3430_AUTO_GPIO3 |
+ OMAP3430_AUTO_GPIO2 |
+ OMAP3430_AUTO_WDT3 |
+ OMAP3430_AUTO_UART3 |
+ OMAP3430_AUTO_GPT9 |
+ OMAP3430_AUTO_GPT8 |
+ OMAP3430_AUTO_GPT7 |
+ OMAP3430_AUTO_GPT6 |
+ OMAP3430_AUTO_GPT5 |
+ OMAP3430_AUTO_GPT4 |
+ OMAP3430_AUTO_GPT3 |
+ OMAP3430_AUTO_GPT2 |
+ OMAP3430_AUTO_MCBSP4 |
+ OMAP3430_AUTO_MCBSP3 |
+ OMAP3430_AUTO_MCBSP2,
+ OMAP3430_PER_MOD,
+ CM_AUTOIDLE);
+
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ cm_write_mod_reg(
+ OMAP3430ES2_AUTO_USBHOST,
+ OMAP3430ES2_USBHOST_MOD,
+ CM_AUTOIDLE);
+ }
+
+ /*
+ * Set all plls to autoidle. This is needed until autoidle is
+ * enabled by clockfw
+ */
+ cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
+ OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
+ cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
+ MPU_MOD,
+ CM_AUTOIDLE2);
+ cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
+ (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT),
+ PLL_MOD,
+ CM_AUTOIDLE);
+ cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
+ PLL_MOD,
+ CM_AUTOIDLE2);
+
+ /*
+ * Enable control of expternal oscillator through
+ * sys_clkreq. In the long run clock framework should
+ * take care of this.
+ */
+ prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
+ 1 << OMAP_AUTOEXTCLKMODE_SHIFT,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+ /* setup wakup source */
+ prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 |
+ OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12,
+ WKUP_MOD, PM_WKEN);
+ /* No need to write EN_IO, that is always enabled */
+ prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 |
+ OMAP3430_EN_GPT12,
+ WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+ /* For some reason IO doesn't generate wakeup event even if
+ * it is selected to mpu wakeup goup */
+ prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
+ OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+
+ /* Don't attach IVA interrupts */
+ prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+ prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+ prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+ prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+ /* Clear any pending 'reset' flags */
+ prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+ /* Clear any pending PRCM interrupts */
+ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ omap3_iva_idle();
+ omap3_d2d_idle();
+}
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm)
+{
+ struct power_state *pwrst;
+
+ if (!pwrdm->pwrsts)
+ return 0;
+
+ pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL);
+ if (!pwrst)
+ return -ENOMEM;
+ pwrst->pwrdm = pwrdm;
+ pwrst->next_state = PWRDM_POWER_RET;
+ list_add(&pwrst->node, &pwrst_list);
+
+ if (pwrdm_has_hdwr_sar(pwrdm))
+ pwrdm_enable_hdwr_sar(pwrdm);
+
+ return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+}
+
+/*
+ * Enable hw supervised mode for all clockdomains if it's
+ * supported. Initiate sleep transition for other clockdomains, if
+ * they are not used
+ */
+static int __init clkdms_setup(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+ omap2_clkdm_allow_idle(clkdm);
+ else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
+ atomic_read(&clkdm->usecount) == 0)
+ omap2_clkdm_sleep(clkdm);
+ return 0;
+}
+
+int __init omap3_pm_init(void)
+{
+ struct power_state *pwrst, *tmp;
+ int ret;
+
+ if (!cpu_is_omap34xx())
+ return -ENODEV;
+
+ printk(KERN_ERR "Power Management for TI OMAP3.\n");
+
+ /* XXX prcm_setup_regs needs to be before enabling hw
+ * supervised mode for powerdomains */
+ prcm_setup_regs();
+
+ ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
+ (irq_handler_t)prcm_interrupt_handler,
+ IRQF_DISABLED, "prcm", NULL);
+ if (ret) {
+ printk(KERN_ERR "request_irq failed to register for 0x%x\n",
+ INT_34XX_PRCM_MPU_IRQ);
+ goto err1;
+ }
+
+ ret = pwrdm_for_each(pwrdms_setup);
+ if (ret) {
+ printk(KERN_ERR "Failed to setup powerdomains\n");
+ goto err2;
+ }
+
+ (void) clkdm_for_each(clkdms_setup);
+
+ mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+ if (mpu_pwrdm == NULL) {
+ printk(KERN_ERR "Failed to get mpu_pwrdm\n");
+ goto err2;
+ }
+
+ _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
+ omap34xx_cpu_suspend_sz);
+
+ suspend_set_ops(&omap_pm_ops);
+
+ pm_idle = omap3_pm_idle;
+
+err1:
+ return ret;
+err2:
+ free_irq(INT_34XX_PRCM_MPU_IRQ, NULL);
+ list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
+ list_del(&pwrst->node);
+ kfree(pwrst);
+ }
+ return ret;
+}
+
+late_initcall(omap3_pm_init);
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 812d50e..cb1ae84 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -276,6 +276,8 @@
/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
#define OMAP3430_EN_GPIO1 (1 << 3)
#define OMAP3430_EN_GPIO1_SHIFT 3
+#define OMAP3430_EN_GPT12 (1 << 1)
+#define OMAP3430_EN_GPT12_SHIFT 1
#define OMAP3430_EN_GPT1 (1 << 0)
#define OMAP3430_EN_GPT1_SHIFT 0
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 826d326b8..9937e28 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -16,17 +16,12 @@
#include "prcm-common.h"
-#ifndef __ASSEMBLER__
-#define OMAP_PRM_REGADDR(module, reg) \
- IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
-#else
#define OMAP2420_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
#define OMAP2430_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
#define OMAP34XX_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
-#endif
/*
* Architecture-specific global PRM registers
@@ -38,80 +33,132 @@
*
*/
-/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */
-#define OMAP24XX_PRCM_VOLTCTRL_OFFSET 0x0050
-#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET 0x0080
-
-/* 242x GR_MOD registers, use these only for assembly code */
-#define OMAP242X_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \
- OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP242X_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \
- OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
-
-/* 243x GR_MOD registers, use these only for assembly code */
-#define OMAP243X_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \
- OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP243X_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \
- OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
-
-/* These will disappear */
-#define OMAP24XX_PRCM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP24XX_PRCM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP24XX_PRCM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP24XX_PRCM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP24XX_PRCM_VOLTST OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP24XX_PRCM_CLKSRC_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP24XX_PRCM_CLKCFG_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP24XX_PRCM_CLKCFG_STATUS OMAP_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP24XX_PRCM_VOLTSETUP OMAP_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP24XX_PRCM_CLKSSETUP OMAP_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP24XX_PRCM_POLCTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP3430_PRM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0004)
-#define OMAP3430_PRM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0014)
-
-#define OMAP3430_PRM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP3430_PRM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-
-
-#define OMAP3430_PRM_VC_SMPS_SA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
-#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
-#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
-#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
-#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
-#define OMAP3430_PRM_VC_CH_CONF OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
-#define OMAP3430_PRM_VC_I2C_CFG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
-#define OMAP3430_PRM_VC_BYPASS_VAL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
-#define OMAP3430_PRM_RSTCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
-#define OMAP3430_PRM_RSTTIME OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
-#define OMAP3430_PRM_RSTST OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
-#define OMAP3430_PRM_VOLTCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
-#define OMAP3430_PRM_SRAM_PCHARGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
-#define OMAP3430_PRM_CLKSRC_CTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
-#define OMAP3430_PRM_VOLTSETUP1 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
-#define OMAP3430_PRM_VOLTOFFSET OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
-#define OMAP3430_PRM_CLKSETUP OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
-#define OMAP3430_PRM_POLCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
-#define OMAP3430_PRM_VOLTSETUP2 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
-#define OMAP3430_PRM_VP1_CONFIG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
-#define OMAP3430_PRM_VP1_VSTEPMIN OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
-#define OMAP3430_PRM_VP1_VSTEPMAX OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
-#define OMAP3430_PRM_VP1_VLIMITTO OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
-#define OMAP3430_PRM_VP1_VOLTAGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
-#define OMAP3430_PRM_VP1_STATUS OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
-#define OMAP3430_PRM_VP2_CONFIG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
-#define OMAP3430_PRM_VP2_VSTEPMIN OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
-#define OMAP3430_PRM_VP2_VSTEPMAX OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
-#define OMAP3430_PRM_VP2_VLIMITTO OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
-#define OMAP3430_PRM_VP2_VOLTAGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
-#define OMAP3430_PRM_VP2_STATUS OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
-
-#define OMAP3430_PRM_CLKSEL OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
-#define OMAP3430_PRM_CLKOUT_CTRL OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+#define OMAP2_PRCM_REVISION_OFFSET 0x0000
+#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
+#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
+#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
+#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
+#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
+#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
+#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
+#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
+#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
+#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
+#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
+#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
+#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP3_PRM_REVISION_OFFSET 0x0004
+#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
+#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
+#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
+#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
+#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
+#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
+#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
+#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
+#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
+#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
+#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
+#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
+#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
+#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3_PRM_RSTST_OFFSET 0x0058
+#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
+#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
+#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
+#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
+#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
+#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
+#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
+#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
+#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
+#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
+#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
+#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
+#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
+#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
+#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
+#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
+#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
+#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
+#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
+#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
+#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
+#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
/*
* Module specific PRM registers from PRM_BASE + domain offset
@@ -156,9 +203,11 @@
#define OMAP3430_PM_MPUGRPSEL 0x00a4
#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
+#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
#define OMAP3430_PM_IVAGRPSEL 0x00a8
#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
+#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
#define OMAP3430_PM_PREPWSTST 0x00e8
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
new file mode 100644
index 0000000..02e1c2d
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -0,0 +1,55 @@
+/*
+ * SDRC register values for the Micron MT46H32M32LF-6
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+
+#include <mach/sdrc.h>
+
+/* Micron MT46H32M32LF-6 */
+/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
+static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = {
+ [0] = {
+ .rate = 166000000,
+ .actim_ctrla = 0x9a9db4c6,
+ .actim_ctrlb = 0x00011217,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [1] = {
+ .rate = 165941176,
+ .actim_ctrla = 0x9a9db4c6,
+ .actim_ctrlb = 0x00011217,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [2] = {
+ .rate = 83000000,
+ .actim_ctrla = 0x51512283,
+ .actim_ctrlb = 0x0001120c,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000032,
+ },
+ [3] = {
+ .rate = 82970588,
+ .actim_ctrla = 0x51512283,
+ .actim_ctrlb = 0x0001120c,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000032,
+ },
+ [4] = {
+ .rate = 0
+ },
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
new file mode 100644
index 0000000..3751d29
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
@@ -0,0 +1,54 @@
+/*
+ * SDRC register values for the Qimonda HYB18M512160AF-6
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+
+#include <mach/sdrc.h>
+
+/* Qimonda HYB18M512160AF-6 */
+static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
+ [0] = {
+ .rate = 166000000,
+ .actim_ctrla = 0x629db4c6,
+ .actim_ctrlb = 0x00012214,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [1] = {
+ .rate = 165941176,
+ .actim_ctrla = 0x629db4c6,
+ .actim_ctrlb = 0x00012214,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [2] = {
+ .rate = 83000000,
+ .actim_ctrla = 0x31512283,
+ .actim_ctrlb = 0x0001220a,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000022,
+ },
+ [3] = {
+ .rate = 82970588,
+ .actim_ctrla = 0x31512283,
+ .actim_ctrlb = 0x0001220a,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000022,
+ },
+ [4] = {
+ .rate = 0
+ },
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 2a30060..2045441 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -37,6 +37,10 @@ static struct omap_sdrc_params *sdrc_init_params;
void __iomem *omap2_sdrc_base;
void __iomem *omap2_sms_base;
+/* SDRC_POWER register bits */
+#define SDRC_POWER_EXTCLKDIS_SHIFT 3
+#define SDRC_POWER_PWDENA_SHIFT 2
+#define SDRC_POWER_PAGEPOLICY_SHIFT 0
/**
* omap2_sdrc_get_params - return SDRC register values for a given clock rate
@@ -56,9 +60,12 @@ struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
{
struct omap_sdrc_params *sp;
+ if (!sdrc_init_params)
+ return NULL;
+
sp = sdrc_init_params;
- while (sp->rate != r)
+ while (sp->rate && sp->rate != r)
sp++;
if (!sp->rate)
@@ -74,7 +81,14 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
omap2_sms_base = omap2_globals->sms;
}
-/* turn on smart idle modes for SDRAM scheduler and controller */
+/**
+ * omap2_sdrc_init - initialize SMS, SDRC devices on boot
+ * @sp: pointer to a null-terminated list of struct omap_sdrc_params
+ *
+ * Turn on smart idle modes for SDRAM scheduler and controller.
+ * Program a known-good configuration for the SDRC to deal with buggy
+ * bootloaders.
+ */
void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
{
u32 l;
@@ -90,4 +104,10 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
sdrc_write_reg(l, SDRC_SYSCONFIG);
sdrc_init_params = sp;
+
+ /* XXX Enable SRFRONIDLEREQ here also? */
+ l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
+ (1 << SDRC_POWER_PWDENA_SHIFT) |
+ (1 << SDRC_POWER_PAGEPOLICY_SHIFT);
+ sdrc_write_reg(l, SDRC_POWER);
}
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 0afdad5..feaec7e 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -99,7 +99,10 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
m_type = omap2xxx_sdrc_get_type();
local_irq_save(flags);
- __raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
+ if (cpu_is_omap2420())
+ __raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP);
+ else
+ __raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP);
omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
curr_perf_level = level;
local_irq_restore(flags);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 4dcf39c2..b094c15 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -6,8 +6,13 @@
* Copyright (C) 2005-2008 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
+ * Major rework for PM support by Kevin Hilman
+ *
* Based off of arch/arm/mach-omap/omap1/serial.c
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
+ *
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
@@ -21,9 +26,50 @@
#include <mach/common.h>
#include <mach/board.h>
+#include <mach/clock.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "pm.h"
+#include "prm-regbits-34xx.h"
+
+#define UART_OMAP_WER 0x17 /* Wake-up enable register */
+
+#define DEFAULT_TIMEOUT (5 * HZ)
-static struct clk *uart_ick[OMAP_MAX_NR_PORTS];
-static struct clk *uart_fck[OMAP_MAX_NR_PORTS];
+struct omap_uart_state {
+ int num;
+ int can_sleep;
+ struct timer_list timer;
+ u32 timeout;
+
+ void __iomem *wk_st;
+ void __iomem *wk_en;
+ u32 wk_mask;
+ u32 padconf;
+
+ struct clk *ick;
+ struct clk *fck;
+ int clocked;
+
+ struct plat_serial8250_port *p;
+ struct list_head node;
+
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+ int context_valid;
+
+ /* Registers to be saved/restored for OFF-mode */
+ u16 dll;
+ u16 dlh;
+ u16 ier;
+ u16 sysc;
+ u16 scr;
+ u16 wer;
+#endif
+};
+
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
+static LIST_HEAD(uart_list);
static struct plat_serial8250_port serial_platform_data[] = {
{
@@ -74,33 +120,369 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
* properly. Note that the TX watermark initialization may not be needed
* once the 8250.c watermark handling code is merged.
*/
-static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
+static inline void __init omap_uart_reset(struct omap_uart_state *uart)
{
+ struct plat_serial8250_port *p = uart->p;
+
serial_write_reg(p, UART_OMAP_MDR1, 0x07);
serial_write_reg(p, UART_OMAP_SCR, 0x08);
serial_write_reg(p, UART_OMAP_MDR1, 0x00);
serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
}
-void omap_serial_enable_clocks(int enable)
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
+
+static int enable_off_mode; /* to be removed by full off-mode patches */
+
+static void omap_uart_save_context(struct omap_uart_state *uart)
{
- int i;
- for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
- if (uart_ick[i] && uart_fck[i]) {
- if (enable) {
- clk_enable(uart_ick[i]);
- clk_enable(uart_fck[i]);
- } else {
- clk_disable(uart_ick[i]);
- clk_disable(uart_fck[i]);
+ u16 lcr = 0;
+ struct plat_serial8250_port *p = uart->p;
+
+ if (!enable_off_mode)
+ return;
+
+ lcr = serial_read_reg(p, UART_LCR);
+ serial_write_reg(p, UART_LCR, 0xBF);
+ uart->dll = serial_read_reg(p, UART_DLL);
+ uart->dlh = serial_read_reg(p, UART_DLM);
+ serial_write_reg(p, UART_LCR, lcr);
+ uart->ier = serial_read_reg(p, UART_IER);
+ uart->sysc = serial_read_reg(p, UART_OMAP_SYSC);
+ uart->scr = serial_read_reg(p, UART_OMAP_SCR);
+ uart->wer = serial_read_reg(p, UART_OMAP_WER);
+
+ uart->context_valid = 1;
+}
+
+static void omap_uart_restore_context(struct omap_uart_state *uart)
+{
+ u16 efr = 0;
+ struct plat_serial8250_port *p = uart->p;
+
+ if (!enable_off_mode)
+ return;
+
+ if (!uart->context_valid)
+ return;
+
+ uart->context_valid = 0;
+
+ serial_write_reg(p, UART_OMAP_MDR1, 0x7);
+ serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+ efr = serial_read_reg(p, UART_EFR);
+ serial_write_reg(p, UART_EFR, UART_EFR_ECB);
+ serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+ serial_write_reg(p, UART_IER, 0x0);
+ serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+ serial_write_reg(p, UART_DLL, uart->dll);
+ serial_write_reg(p, UART_DLM, uart->dlh);
+ serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+ serial_write_reg(p, UART_IER, uart->ier);
+ serial_write_reg(p, UART_FCR, 0xA1);
+ serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+ serial_write_reg(p, UART_EFR, efr);
+ serial_write_reg(p, UART_LCR, UART_LCR_WLEN8);
+ serial_write_reg(p, UART_OMAP_SCR, uart->scr);
+ serial_write_reg(p, UART_OMAP_WER, uart->wer);
+ serial_write_reg(p, UART_OMAP_SYSC, uart->sysc);
+ serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
+}
+#else
+static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
+static inline void omap_uart_restore_context(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */
+
+static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
+{
+ if (uart->clocked)
+ return;
+
+ clk_enable(uart->ick);
+ clk_enable(uart->fck);
+ uart->clocked = 1;
+ omap_uart_restore_context(uart);
+}
+
+#ifdef CONFIG_PM
+
+static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
+{
+ if (!uart->clocked)
+ return;
+
+ omap_uart_save_context(uart);
+ uart->clocked = 0;
+ clk_disable(uart->ick);
+ clk_disable(uart->fck);
+}
+
+static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
+ int enable)
+{
+ struct plat_serial8250_port *p = uart->p;
+ u16 sysc;
+
+ sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7;
+ if (enable)
+ sysc |= 0x2 << 3;
+ else
+ sysc |= 0x1 << 3;
+
+ serial_write_reg(p, UART_OMAP_SYSC, sysc);
+}
+
+static void omap_uart_block_sleep(struct omap_uart_state *uart)
+{
+ omap_uart_enable_clocks(uart);
+
+ omap_uart_smart_idle_enable(uart, 0);
+ uart->can_sleep = 0;
+ if (uart->timeout)
+ mod_timer(&uart->timer, jiffies + uart->timeout);
+ else
+ del_timer(&uart->timer);
+}
+
+static void omap_uart_allow_sleep(struct omap_uart_state *uart)
+{
+ if (!uart->clocked)
+ return;
+
+ omap_uart_smart_idle_enable(uart, 1);
+ uart->can_sleep = 1;
+ del_timer(&uart->timer);
+}
+
+static void omap_uart_idle_timer(unsigned long data)
+{
+ struct omap_uart_state *uart = (struct omap_uart_state *)data;
+
+ omap_uart_allow_sleep(uart);
+}
+
+void omap_uart_prepare_idle(int num)
+{
+ struct omap_uart_state *uart;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ if (num == uart->num && uart->can_sleep) {
+ omap_uart_disable_clocks(uart);
+ return;
+ }
+ }
+}
+
+void omap_uart_resume_idle(int num)
+{
+ struct omap_uart_state *uart;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ if (num == uart->num) {
+ omap_uart_enable_clocks(uart);
+
+ /* Check for IO pad wakeup */
+ if (cpu_is_omap34xx() && uart->padconf) {
+ u16 p = omap_ctrl_readw(uart->padconf);
+
+ if (p & OMAP3_PADCONF_WAKEUPEVENT0)
+ omap_uart_block_sleep(uart);
}
+
+ /* Check for normal UART wakeup */
+ if (__raw_readl(uart->wk_st) & uart->wk_mask)
+ omap_uart_block_sleep(uart);
+
+ return;
}
}
}
+void omap_uart_prepare_suspend(void)
+{
+ struct omap_uart_state *uart;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ omap_uart_allow_sleep(uart);
+ }
+}
+
+int omap_uart_can_sleep(void)
+{
+ struct omap_uart_state *uart;
+ int can_sleep = 1;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ if (!uart->clocked)
+ continue;
+
+ if (!uart->can_sleep) {
+ can_sleep = 0;
+ continue;
+ }
+
+ /* This UART can now safely sleep. */
+ omap_uart_allow_sleep(uart);
+ }
+
+ return can_sleep;
+}
+
+/**
+ * omap_uart_interrupt()
+ *
+ * This handler is used only to detect that *any* UART interrupt has
+ * occurred. It does _nothing_ to handle the interrupt. Rather,
+ * any UART interrupt will trigger the inactivity timer so the
+ * UART will not idle or sleep for its timeout period.
+ *
+ **/
+static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
+{
+ struct omap_uart_state *uart = dev_id;
+
+ omap_uart_block_sleep(uart);
+
+ return IRQ_NONE;
+}
+
+static u32 sleep_timeout = DEFAULT_TIMEOUT;
+
+static void omap_uart_idle_init(struct omap_uart_state *uart)
+{
+ u32 v;
+ struct plat_serial8250_port *p = uart->p;
+ int ret;
+
+ uart->can_sleep = 0;
+ uart->timeout = sleep_timeout;
+ setup_timer(&uart->timer, omap_uart_idle_timer,
+ (unsigned long) uart);
+ mod_timer(&uart->timer, jiffies + uart->timeout);
+ omap_uart_smart_idle_enable(uart, 0);
+
+ if (cpu_is_omap34xx()) {
+ u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD;
+ u32 wk_mask = 0;
+ u32 padconf = 0;
+
+ uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1);
+ uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1);
+ switch (uart->num) {
+ case 0:
+ wk_mask = OMAP3430_ST_UART1_MASK;
+ padconf = 0x182;
+ break;
+ case 1:
+ wk_mask = OMAP3430_ST_UART2_MASK;
+ padconf = 0x17a;
+ break;
+ case 2:
+ wk_mask = OMAP3430_ST_UART3_MASK;
+ padconf = 0x19e;
+ break;
+ }
+ uart->wk_mask = wk_mask;
+ uart->padconf = padconf;
+ } else if (cpu_is_omap24xx()) {
+ u32 wk_mask = 0;
+
+ if (cpu_is_omap2430()) {
+ uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+ uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1);
+ } else if (cpu_is_omap2420()) {
+ uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+ uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1);
+ }
+ switch (uart->num) {
+ case 0:
+ wk_mask = OMAP24XX_ST_UART1_MASK;
+ break;
+ case 1:
+ wk_mask = OMAP24XX_ST_UART2_MASK;
+ break;
+ case 2:
+ wk_mask = OMAP24XX_ST_UART3_MASK;
+ break;
+ }
+ uart->wk_mask = wk_mask;
+ } else {
+ uart->wk_en = 0;
+ uart->wk_st = 0;
+ uart->wk_mask = 0;
+ uart->padconf = 0;
+ }
+
+ /* Set wake-enable bit */
+ if (uart->wk_en && uart->wk_mask) {
+ v = __raw_readl(uart->wk_en);
+ v |= uart->wk_mask;
+ __raw_writel(v, uart->wk_en);
+ }
+
+ /* Ensure IOPAD wake-enables are set */
+ if (cpu_is_omap34xx() && uart->padconf) {
+ u16 v;
+
+ v = omap_ctrl_readw(uart->padconf);
+ v |= OMAP3_PADCONF_WAKEUPENABLE0;
+ omap_ctrl_writew(v, uart->padconf);
+ }
+
+ p->flags |= UPF_SHARE_IRQ;
+ ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
+ "serial idle", (void *)uart);
+ WARN_ON(ret);
+}
+
+static ssize_t sleep_timeout_show(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%u\n", sleep_timeout / HZ);
+}
+
+static ssize_t sleep_timeout_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t n)
+{
+ struct omap_uart_state *uart;
+ unsigned int value;
+
+ if (sscanf(buf, "%u", &value) != 1) {
+ printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
+ return -EINVAL;
+ }
+ sleep_timeout = value * HZ;
+ list_for_each_entry(uart, &uart_list, node) {
+ uart->timeout = sleep_timeout;
+ if (uart->timeout)
+ mod_timer(&uart->timer, jiffies + uart->timeout);
+ else
+ /* A zero value means disable timeout feature */
+ omap_uart_block_sleep(uart);
+ }
+ return n;
+}
+
+static struct kobj_attribute sleep_timeout_attr =
+ __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+
+#else
+static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM */
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
void __init omap_serial_init(void)
{
- int i;
+ int i, err;
const struct omap_uart_config *info;
char name[16];
@@ -114,9 +496,14 @@ void __init omap_serial_init(void)
if (info == NULL)
return;
+ if (cpu_is_omap44xx()) {
+ for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
+ serial_platform_data[i].irq += 32;
+ }
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
struct plat_serial8250_port *p = serial_platform_data + i;
+ struct omap_uart_state *uart = &omap_uart[i];
if (!(info->enabled_uarts & (1 << i))) {
p->membase = NULL;
@@ -125,35 +512,39 @@ void __init omap_serial_init(void)
}
sprintf(name, "uart%d_ick", i+1);
- uart_ick[i] = clk_get(NULL, name);
- if (IS_ERR(uart_ick[i])) {
+ uart->ick = clk_get(NULL, name);
+ if (IS_ERR(uart->ick)) {
printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
- uart_ick[i] = NULL;
- } else
- clk_enable(uart_ick[i]);
+ uart->ick = NULL;
+ }
sprintf(name, "uart%d_fck", i+1);
- uart_fck[i] = clk_get(NULL, name);
- if (IS_ERR(uart_fck[i])) {
+ uart->fck = clk_get(NULL, name);
+ if (IS_ERR(uart->fck)) {
printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
- uart_fck[i] = NULL;
- } else
- clk_enable(uart_fck[i]);
+ uart->fck = NULL;
+ }
- omap_serial_reset(p);
+ if (!uart->ick || !uart->fck)
+ continue;
+
+ uart->num = i;
+ p->private_data = uart;
+ uart->p = p;
+ list_add(&uart->node, &uart_list);
+
+ omap_uart_enable_clocks(uart);
+ omap_uart_reset(uart);
+ omap_uart_idle_init(uart);
}
-}
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
+ err = platform_device_register(&serial_device);
+
+#ifdef CONFIG_PM
+ if (!err)
+ err = sysfs_create_file(&serial_device.dev.kobj,
+ &sleep_timeout_attr.attr);
+#endif
-static int __init omap_init(void)
-{
- return platform_device_register(&serial_device);
}
-arch_initcall(omap_init);
+
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index bf9e961..130aadb 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -28,7 +28,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
-#include <mach/pm.h>
#include <mach/omap24xx.h>
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
new file mode 100644
index 0000000..e5e2553
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -0,0 +1,436 @@
+/*
+ * linux/arch/arm/mach-omap2/sleep.S
+ *
+ * (C) Copyright 2007
+ * Texas Instruments
+ * Karthik Dasu <karthik-dp@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/io.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "sdrc.h"
+
+#define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \
+ OMAP3430_PM_PREPWSTST)
+#define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \
+ OMAP3430_PM_PREPWSTST)
+#define PM_PWSTCTRL_MPU_P OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL)
+#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is
+ * available */
+#define SCRATCHPAD_BASE_P OMAP343X_CTRL_REGADDR(\
+ OMAP343X_CONTROL_MEM_WKUP +\
+ SCRATCHPAD_MEM_OFFS)
+#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+
+ .text
+/* Function call to get the restore pointer for resume from OFF */
+ENTRY(get_restore_pointer)
+ stmfd sp!, {lr} @ save registers on stack
+ adr r0, restore
+ ldmfd sp!, {pc} @ restore regs and return
+ENTRY(get_restore_pointer_sz)
+ .word . - get_restore_pointer_sz
+/*
+ * Forces OMAP into idle state
+ *
+ * omap34xx_suspend() - This bit of code just executes the WFI
+ * for normal idles.
+ *
+ * Note: This code get's copied to internal SRAM at boot. When the OMAP
+ * wakes up it continues execution at the point it went to sleep.
+ */
+ENTRY(omap34xx_cpu_suspend)
+ stmfd sp!, {r0-r12, lr} @ save registers on stack
+loop:
+ /*b loop*/ @Enable to debug by stepping through code
+ /* r0 contains restore pointer in sdram */
+ /* r1 contains information about saving context */
+ ldr r4, sdrc_power @ read the SDRC_POWER register
+ ldr r5, [r4] @ read the contents of SDRC_POWER
+ orr r5, r5, #0x40 @ enable self refresh on idle req
+ str r5, [r4] @ write back to SDRC_POWER register
+
+ cmp r1, #0x0
+ /* If context save is required, do that and execute wfi */
+ bne save_context_wfi
+ /* Data memory barrier and Data sync barrier */
+ mov r1, #0
+ mcr p15, 0, r1, c7, c10, 4
+ mcr p15, 0, r1, c7, c10, 5
+
+ wfi @ wait for interrupt
+
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ bl i_dll_wait
+
+ ldmfd sp!, {r0-r12, pc} @ restore regs and return
+restore:
+ /* b restore*/ @ Enable to debug restore code
+ /* Check what was the reason for mpu reset and store the reason in r9*/
+ /* 1 - Only L1 and logic lost */
+ /* 2 - Only L2 lost - In this case, we wont be here */
+ /* 3 - Both L1 and L2 lost */
+ ldr r1, pm_pwstctrl_mpu
+ ldr r2, [r1]
+ and r2, r2, #0x3
+ cmp r2, #0x0 @ Check if target power state was OFF or RET
+ moveq r9, #0x3 @ MPU OFF => L1 and L2 lost
+ movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation
+ bne logic_l1_restore
+ /* Execute smi to invalidate L2 cache */
+ mov r12, #0x1 @ set up to invalide L2
+smi: .word 0xE1600070 @ Call SMI monitor (smieq)
+logic_l1_restore:
+ mov r1, #0
+ /* Invalidate all instruction caches to PoU
+ * and flush branch target cache */
+ mcr p15, 0, r1, c7, c5, 0
+
+ ldr r4, scratchpad_base
+ ldr r3, [r4,#0xBC]
+ ldmia r3!, {r4-r6}
+ mov sp, r4
+ msr spsr_cxsf, r5
+ mov lr, r6
+
+ ldmia r3!, {r4-r9}
+ /* Coprocessor access Control Register */
+ mcr p15, 0, r4, c1, c0, 2
+
+ /* TTBR0 */
+ MCR p15, 0, r5, c2, c0, 0
+ /* TTBR1 */
+ MCR p15, 0, r6, c2, c0, 1
+ /* Translation table base control register */
+ MCR p15, 0, r7, c2, c0, 2
+ /*domain access Control Register */
+ MCR p15, 0, r8, c3, c0, 0
+ /* data fault status Register */
+ MCR p15, 0, r9, c5, c0, 0
+
+ ldmia r3!,{r4-r8}
+ /* instruction fault status Register */
+ MCR p15, 0, r4, c5, c0, 1
+ /*Data Auxiliary Fault Status Register */
+ MCR p15, 0, r5, c5, c1, 0
+ /*Instruction Auxiliary Fault Status Register*/
+ MCR p15, 0, r6, c5, c1, 1
+ /*Data Fault Address Register */
+ MCR p15, 0, r7, c6, c0, 0
+ /*Instruction Fault Address Register*/
+ MCR p15, 0, r8, c6, c0, 2
+ ldmia r3!,{r4-r7}
+
+ /* user r/w thread and process ID */
+ MCR p15, 0, r4, c13, c0, 2
+ /* user ro thread and process ID */
+ MCR p15, 0, r5, c13, c0, 3
+ /*Privileged only thread and process ID */
+ MCR p15, 0, r6, c13, c0, 4
+ /* cache size selection */
+ MCR p15, 2, r7, c0, c0, 0
+ ldmia r3!,{r4-r8}
+ /* Data TLB lockdown registers */
+ MCR p15, 0, r4, c10, c0, 0
+ /* Instruction TLB lockdown registers */
+ MCR p15, 0, r5, c10, c0, 1
+ /* Secure or Nonsecure Vector Base Address */
+ MCR p15, 0, r6, c12, c0, 0
+ /* FCSE PID */
+ MCR p15, 0, r7, c13, c0, 0
+ /* Context PID */
+ MCR p15, 0, r8, c13, c0, 1
+
+ ldmia r3!,{r4-r5}
+ /* primary memory remap register */
+ MCR p15, 0, r4, c10, c2, 0
+ /*normal memory remap register */
+ MCR p15, 0, r5, c10, c2, 1
+
+ /* Restore cpsr */
+ ldmia r3!,{r4} /*load CPSR from SDRAM*/
+ msr cpsr, r4 /*store cpsr */
+
+ /* Enabling MMU here */
+ mrc p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
+ /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
+ and r7, #0x7
+ cmp r7, #0x0
+ beq usettbr0
+ttbr_error:
+ /* More work needs to be done to support N[0:2] value other than 0
+ * So looping here so that the error can be detected
+ */
+ b ttbr_error
+usettbr0:
+ mrc p15, 0, r2, c2, c0, 0
+ ldr r5, ttbrbit_mask
+ and r2, r5
+ mov r4, pc
+ ldr r5, table_index_mask
+ and r4, r5 /* r4 = 31 to 20 bits of pc */
+ /* Extract the value to be written to table entry */
+ ldr r1, table_entry
+ add r1, r1, r4 /* r1 has value to be written to table entry*/
+ /* Getting the address of table entry to modify */
+ lsr r4, #18
+ add r2, r4 /* r2 has the location which needs to be modified */
+ /* Storing previous entry of location being modified */
+ ldr r5, scratchpad_base
+ ldr r4, [r2]
+ str r4, [r5, #0xC0]
+ /* Modify the table entry */
+ str r1, [r2]
+ /* Storing address of entry being modified
+ * - will be restored after enabling MMU */
+ ldr r5, scratchpad_base
+ str r2, [r5, #0xC4]
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer
+ mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
+ mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
+ mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
+ /* Restore control register but dont enable caches here*/
+ /* Caches will be enabled after restoring MMU table entry */
+ ldmia r3!, {r4}
+ /* Store previous value of control register in scratchpad */
+ str r4, [r5, #0xC8]
+ ldr r2, cache_pred_disable_mask
+ and r4, r2
+ mcr p15, 0, r4, c1, c0, 0
+
+ ldmfd sp!, {r0-r12, pc} @ restore regs and return
+save_context_wfi:
+ /*b save_context_wfi*/ @ enable to debug save code
+ mov r8, r0 /* Store SDRAM address in r8 */
+ /* Check what that target sleep state is:stored in r1*/
+ /* 1 - Only L1 and logic lost */
+ /* 2 - Only L2 lost */
+ /* 3 - Both L1 and L2 lost */
+ cmp r1, #0x2 /* Only L2 lost */
+ beq clean_l2
+ cmp r1, #0x1 /* L2 retained */
+ /* r9 stores whether to clean L2 or not*/
+ moveq r9, #0x0 /* Dont Clean L2 */
+ movne r9, #0x1 /* Clean L2 */
+l1_logic_lost:
+ /* Store sp and spsr to SDRAM */
+ mov r4, sp
+ mrs r5, spsr
+ mov r6, lr
+ stmia r8!, {r4-r6}
+ /* Save all ARM registers */
+ /* Coprocessor access control register */
+ mrc p15, 0, r6, c1, c0, 2
+ stmia r8!, {r6}
+ /* TTBR0, TTBR1 and Translation table base control */
+ mrc p15, 0, r4, c2, c0, 0
+ mrc p15, 0, r5, c2, c0, 1
+ mrc p15, 0, r6, c2, c0, 2
+ stmia r8!, {r4-r6}
+ /* Domain access control register, data fault status register,
+ and instruction fault status register */
+ mrc p15, 0, r4, c3, c0, 0
+ mrc p15, 0, r5, c5, c0, 0
+ mrc p15, 0, r6, c5, c0, 1
+ stmia r8!, {r4-r6}
+ /* Data aux fault status register, instruction aux fault status,
+ datat fault address register and instruction fault address register*/
+ mrc p15, 0, r4, c5, c1, 0
+ mrc p15, 0, r5, c5, c1, 1
+ mrc p15, 0, r6, c6, c0, 0
+ mrc p15, 0, r7, c6, c0, 2
+ stmia r8!, {r4-r7}
+ /* user r/w thread and process ID, user r/o thread and process ID,
+ priv only thread and process ID, cache size selection */
+ mrc p15, 0, r4, c13, c0, 2
+ mrc p15, 0, r5, c13, c0, 3
+ mrc p15, 0, r6, c13, c0, 4
+ mrc p15, 2, r7, c0, c0, 0
+ stmia r8!, {r4-r7}
+ /* Data TLB lockdown, instruction TLB lockdown registers */
+ mrc p15, 0, r5, c10, c0, 0
+ mrc p15, 0, r6, c10, c0, 1
+ stmia r8!, {r5-r6}
+ /* Secure or non secure vector base address, FCSE PID, Context PID*/
+ mrc p15, 0, r4, c12, c0, 0
+ mrc p15, 0, r5, c13, c0, 0
+ mrc p15, 0, r6, c13, c0, 1
+ stmia r8!, {r4-r6}
+ /* Primary remap, normal remap registers */
+ mrc p15, 0, r4, c10, c2, 0
+ mrc p15, 0, r5, c10, c2, 1
+ stmia r8!,{r4-r5}
+
+ /* Store current cpsr*/
+ mrs r2, cpsr
+ stmia r8!, {r2}
+
+ mrc p15, 0, r4, c1, c0, 0
+ /* save control register */
+ stmia r8!, {r4}
+clean_caches:
+ /* Clean Data or unified cache to POU*/
+ /* How to invalidate only L1 cache???? - #FIX_ME# */
+ /* mcr p15, 0, r11, c7, c11, 1 */
+ cmp r9, #1 /* Check whether L2 inval is required or not*/
+ bne skip_l2_inval
+clean_l2:
+ /* read clidr */
+ mrc p15, 1, r0, c0, c0, 1
+ /* extract loc from clidr */
+ ands r3, r0, #0x7000000
+ /* left align loc bit field */
+ mov r3, r3, lsr #23
+ /* if loc is 0, then no need to clean */
+ beq finished
+ /* start clean at cache level 0 */
+ mov r10, #0
+loop1:
+ /* work out 3x current cache level */
+ add r2, r10, r10, lsr #1
+ /* extract cache type bits from clidr*/
+ mov r1, r0, lsr r2
+ /* mask of the bits for current cache only */
+ and r1, r1, #7
+ /* see what cache we have at this level */
+ cmp r1, #2
+ /* skip if no cache, or just i-cache */
+ blt skip
+ /* select current cache level in cssr */
+ mcr p15, 2, r10, c0, c0, 0
+ /* isb to sych the new cssr&csidr */
+ isb
+ /* read the new csidr */
+ mrc p15, 1, r1, c0, c0, 0
+ /* extract the length of the cache lines */
+ and r2, r1, #7
+ /* add 4 (line length offset) */
+ add r2, r2, #4
+ ldr r4, assoc_mask
+ /* find maximum number on the way size */
+ ands r4, r4, r1, lsr #3
+ /* find bit position of way size increment */
+ clz r5, r4
+ ldr r7, numset_mask
+ /* extract max number of the index size*/
+ ands r7, r7, r1, lsr #13
+loop2:
+ mov r9, r4
+ /* create working copy of max way size*/
+loop3:
+ /* factor way and cache number into r11 */
+ orr r11, r10, r9, lsl r5
+ /* factor index number into r11 */
+ orr r11, r11, r7, lsl r2
+ /*clean & invalidate by set/way */
+ mcr p15, 0, r11, c7, c10, 2
+ /* decrement the way*/
+ subs r9, r9, #1
+ bge loop3
+ /*decrement the index */
+ subs r7, r7, #1
+ bge loop2
+skip:
+ add r10, r10, #2
+ /* increment cache number */
+ cmp r3, r10
+ bgt loop1
+finished:
+ /*swith back to cache level 0 */
+ mov r10, #0
+ /* select current cache level in cssr */
+ mcr p15, 2, r10, c0, c0, 0
+ isb
+skip_l2_inval:
+ /* Data memory barrier and Data sync barrier */
+ mov r1, #0
+ mcr p15, 0, r1, c7, c10, 4
+ mcr p15, 0, r1, c7, c10, 5
+
+ wfi @ wait for interrupt
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ bl i_dll_wait
+ /* restore regs and return */
+ ldmfd sp!, {r0-r12, pc}
+
+i_dll_wait:
+ ldr r4, clk_stabilize_delay
+
+i_dll_delay:
+ subs r4, r4, #0x1
+ bne i_dll_delay
+ ldr r4, sdrc_power
+ ldr r5, [r4]
+ bic r5, r5, #0x40
+ str r5, [r4]
+ bx lr
+pm_prepwstst_core:
+ .word PM_PREPWSTST_CORE_V
+pm_prepwstst_mpu:
+ .word PM_PREPWSTST_MPU_V
+pm_pwstctrl_mpu:
+ .word PM_PWSTCTRL_MPU_P
+scratchpad_base:
+ .word SCRATCHPAD_BASE_P
+sdrc_power:
+ .word SDRC_POWER_V
+context_mem:
+ .word 0x803E3E14
+clk_stabilize_delay:
+ .word 0x000001FF
+assoc_mask:
+ .word 0x3ff
+numset_mask:
+ .word 0x7fff
+ttbrbit_mask:
+ .word 0xFFFFC000
+table_index_mask:
+ .word 0xFFF00000
+table_entry:
+ .word 0x00000C02
+cache_pred_disable_mask:
+ .word 0xFFFFE7FB
+ENTRY(omap34xx_cpu_suspend_sz)
+ .word . - omap34xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index af4bd34..bb29985 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -124,11 +124,11 @@ omap242x_sdi_cm_clksel2_pll:
omap242x_sdi_sdrc_dlla_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
omap242x_sdi_prcm_voltctrl:
- .word OMAP242X_PRCM_VOLTCTRL
+ .word OMAP2420_PRCM_VOLTCTRL
prcm_mask_val:
.word 0xFFFF3FFC
omap242x_sdi_timer_32ksynct_cr:
- .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
ENTRY(omap242x_sram_ddr_init_sz)
.word . - omap242x_sram_ddr_init
@@ -220,11 +220,11 @@ omap242x_srs_sdrc_dlla_ctrl:
omap242x_srs_sdrc_rfr_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
omap242x_srs_prcm_voltctrl:
- .word OMAP242X_PRCM_VOLTCTRL
+ .word OMAP2420_PRCM_VOLTCTRL
ddr_prcm_mask_val:
.word 0xFFFF3FFC
omap242x_srs_timer_32ksynct:
- .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
ENTRY(omap242x_sram_reprogram_sdrc_sz)
.word . - omap242x_sram_reprogram_sdrc
@@ -305,7 +305,7 @@ wait_dll_lock:
ldmfd sp!, {r0-r12, pc} @ restore regs and return
omap242x_ssp_set_config:
- .word OMAP242X_PRCM_CLKCFG_CTRL
+ .word OMAP2420_PRCM_CLKCFG_CTRL
omap242x_ssp_pll_ctl:
.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
omap242x_ssp_pll_stat:
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index 84363e2..9955abc 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -124,11 +124,11 @@ omap243x_sdi_cm_clksel2_pll:
omap243x_sdi_sdrc_dlla_ctrl:
.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
omap243x_sdi_prcm_voltctrl:
- .word OMAP243X_PRCM_VOLTCTRL
+ .word OMAP2430_PRCM_VOLTCTRL
prcm_mask_val:
.word 0xFFFF3FFC
omap243x_sdi_timer_32ksynct_cr:
- .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
ENTRY(omap243x_sram_ddr_init_sz)
.word . - omap243x_sram_ddr_init
@@ -220,11 +220,11 @@ omap243x_srs_sdrc_dlla_ctrl:
omap243x_srs_sdrc_rfr_ctrl:
.word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
omap243x_srs_prcm_voltctrl:
- .word OMAP243X_PRCM_VOLTCTRL
+ .word OMAP2430_PRCM_VOLTCTRL
ddr_prcm_mask_val:
.word 0xFFFF3FFC
omap243x_srs_timer_32ksynct:
- .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
ENTRY(omap243x_sram_reprogram_sdrc_sz)
.word . - omap243x_sram_reprogram_sdrc
@@ -305,7 +305,7 @@ wait_dll_lock:
ldmfd sp!, {r0-r12, pc} @ restore regs and return
omap243x_ssp_set_config:
- .word OMAP243X_PRCM_CLKCFG_CTRL
+ .word OMAP2430_PRCM_CLKCFG_CTRL
omap243x_ssp_pll_ctl:
.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
omap243x_ssp_pll_stat:
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 2c71461..c080c825 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -40,69 +40,74 @@
/*
* Change frequency of core dpll
* r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
+ * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for
+ * SDRC rates < 83MHz
*/
ENTRY(omap3_sram_configure_core_dpll)
stmfd sp!, {r1-r12, lr} @ store regs to stack
+ ldr r4, [sp, #52] @ pull extra args off the stack
+ dsb @ flush buffered writes to interconnect
cmp r3, #0x2
blne configure_sdrc
- cmp r3, #0x2
+ cmp r4, #0x1
+ bleq unlock_dll
blne lock_dll
- cmp r3, #0x1
- blne unlock_dll
bl sdram_in_selfrefresh @ put the SDRAM in self refresh
bl configure_core_dpll
bl enable_sdrc
- cmp r3, #0x1
- blne wait_dll_unlock
- cmp r3, #0x2
+ cmp r4, #0x1
+ bleq wait_dll_unlock
blne wait_dll_lock
cmp r3, #0x1
blne configure_sdrc
+ isb @ prevent speculative exec past here
mov r0, #0 @ return value
ldmfd sp!, {r1-r12, pc} @ restore regs and return
unlock_dll:
- ldr r4, omap3_sdrc_dlla_ctrl
- ldr r5, [r4]
- orr r5, r5, #0x4
- str r5, [r4]
+ ldr r11, omap3_sdrc_dlla_ctrl
+ ldr r12, [r11]
+ orr r12, r12, #0x4
+ str r12, [r11] @ (no OCP barrier needed)
bx lr
lock_dll:
- ldr r4, omap3_sdrc_dlla_ctrl
- ldr r5, [r4]
- bic r5, r5, #0x4
- str r5, [r4]
+ ldr r11, omap3_sdrc_dlla_ctrl
+ ldr r12, [r11]
+ bic r12, r12, #0x4
+ str r12, [r11] @ (no OCP barrier needed)
bx lr
sdram_in_selfrefresh:
- mov r5, #0x0 @ Move 0 to R5
- mcr p15, 0, r5, c7, c10, 5 @ memory barrier
- ldr r4, omap3_sdrc_power @ read the SDRC_POWER register
- ldr r5, [r4] @ read the contents of SDRC_POWER
- orr r5, r5, #0x40 @ enable self refresh on idle req
- str r5, [r4] @ write back to SDRC_POWER register
- ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
- ldr r5, [r4]
- bic r5, r5, #0x2 @ disable iclk bit for SRDC
- str r5, [r4]
+ ldr r11, omap3_sdrc_power @ read the SDRC_POWER register
+ ldr r12, [r11] @ read the contents of SDRC_POWER
+ mov r9, r12 @ keep a copy of SDRC_POWER bits
+ orr r12, r12, #0x40 @ enable self refresh on idle req
+ bic r12, r12, #0x4 @ clear PWDENA
+ str r12, [r11] @ write back to SDRC_POWER register
+ ldr r12, [r11] @ posted-write barrier for SDRC
+ ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
+ ldr r12, [r11]
+ bic r12, r12, #0x2 @ disable iclk bit for SDRC
+ str r12, [r11]
wait_sdrc_idle:
- ldr r4, omap3_cm_idlest1_core
- ldr r5, [r4]
- and r5, r5, #0x2 @ check for SDRC idle
- cmp r5, #2
+ ldr r11, omap3_cm_idlest1_core
+ ldr r12, [r11]
+ and r12, r12, #0x2 @ check for SDRC idle
+ cmp r12, #2
bne wait_sdrc_idle
bx lr
configure_core_dpll:
- ldr r4, omap3_cm_clksel1_pll
- ldr r5, [r4]
- ldr r6, core_m2_mask_val @ modify m2 for core dpll
- and r5, r5, r6
- orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val
- str r5, [r4]
- mov r5, #0x800 @ wait for the clock to stabilise
+ ldr r11, omap3_cm_clksel1_pll
+ ldr r12, [r11]
+ ldr r10, core_m2_mask_val @ modify m2 for core dpll
+ and r12, r12, r10
+ orr r12, r12, r3, lsl #0x1B @ r3 contains the M2 val
+ str r12, [r11]
+ ldr r12, [r11] @ posted-write barrier for CM
+ mov r12, #0x800 @ wait for the clock to stabilise
cmp r3, #2
bne wait_clk_stable
bx lr
wait_clk_stable:
- subs r5, r5, #1
+ subs r12, r12, #1
bne wait_clk_stable
nop
nop
@@ -116,42 +121,42 @@ wait_clk_stable:
nop
bx lr
enable_sdrc:
- ldr r4, omap3_cm_iclken1_core
- ldr r5, [r4]
- orr r5, r5, #0x2 @ enable iclk bit for SDRC
- str r5, [r4]
+ ldr r11, omap3_cm_iclken1_core
+ ldr r12, [r11]
+ orr r12, r12, #0x2 @ enable iclk bit for SDRC
+ str r12, [r11]
wait_sdrc_idle1:
- ldr r4, omap3_cm_idlest1_core
- ldr r5, [r4]
- and r5, r5, #0x2
- cmp r5, #0
+ ldr r11, omap3_cm_idlest1_core
+ ldr r12, [r11]
+ and r12, r12, #0x2
+ cmp r12, #0
bne wait_sdrc_idle1
- ldr r4, omap3_sdrc_power
- ldr r5, [r4]
- bic r5, r5, #0x40
- str r5, [r4]
+restore_sdrc_power_val:
+ ldr r11, omap3_sdrc_power
+ str r9, [r11] @ restore SDRC_POWER, no barrier needed
bx lr
wait_dll_lock:
- ldr r4, omap3_sdrc_dlla_status
- ldr r5, [r4]
- and r5, r5, #0x4
- cmp r5, #0x4
+ ldr r11, omap3_sdrc_dlla_status
+ ldr r12, [r11]
+ and r12, r12, #0x4
+ cmp r12, #0x4
bne wait_dll_lock
bx lr
wait_dll_unlock:
- ldr r4, omap3_sdrc_dlla_status
- ldr r5, [r4]
- and r5, r5, #0x4
- cmp r5, #0x0
+ ldr r11, omap3_sdrc_dlla_status
+ ldr r12, [r11]
+ and r12, r12, #0x4
+ cmp r12, #0x0
bne wait_dll_unlock
bx lr
configure_sdrc:
- ldr r4, omap3_sdrc_rfr_ctrl
- str r0, [r4]
- ldr r4, omap3_sdrc_actim_ctrla
- str r1, [r4]
- ldr r4, omap3_sdrc_actim_ctrlb
- str r2, [r4]
+ ldr r11, omap3_sdrc_rfr_ctrl
+ str r0, [r11]
+ ldr r11, omap3_sdrc_actim_ctrla
+ str r1, [r11]
+ ldr r11, omap3_sdrc_actim_ctrlb
+ str r2, [r11]
+ ldr r2, [r11] @ posted-write barrier for SDRC
bx lr
omap3_sdrc_power:
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index f36aba1..97eeeeb 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -17,9 +17,10 @@
*
* Some parts based off of TI's 24xx code:
*
- * Copyright (C) 2004 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Texas Instruments, Inc.
*
* Roughly modelled after the OMAP1 MPU timer code.
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -37,6 +38,7 @@
#include <asm/mach/time.h>
#include <mach/dmtimer.h>
+#include <asm/localtimer.h>
/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
#define MAX_GPTIMER_ID 12
@@ -82,7 +84,8 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
case CLOCK_EVT_MODE_PERIODIC:
period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
period -= 1;
-
+ if (cpu_is_omap44xx())
+ period = 0xff; /* FIXME: */
omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
break;
case CLOCK_EVT_MODE_ONESHOT:
@@ -145,6 +148,9 @@ static void __init omap2_gp_clockevent_init(void)
"timer-gp: omap_dm_timer_set_source() failed\n");
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
+ if (cpu_is_omap44xx())
+ /* Assuming 32kHz clk is driving GPT1 */
+ tick_rate = 32768; /* FIXME: */
pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
gptimer_id, tick_rate);
@@ -224,6 +230,9 @@ static void __init omap2_gp_clocksource_init(void)
static void __init omap2_gp_timer_init(void)
{
+#ifdef CONFIG_LOCAL_TIMERS
+ twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
+#endif
omap_dm_timer_init();
omap2_gp_clockevent_init();
diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c
new file mode 100644
index 0000000..c1a650a
--- /dev/null
+++ b/arch/arm/mach-omap2/timer-mpu.c
@@ -0,0 +1,34 @@
+/*
+ * The MPU local timer source file. In OMAP4, both cortex-a9 cores have
+ * own timer in it's MPU domain. These timers will be driving the
+ * linux kernel SMP tick framework when active. These timers are not
+ * part of the wake up domain.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This file is based on arm realview smp platform file.
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+ evt->irq = INT_44XX_LOCALTIMER_IRQ;
+ twd_timer_setup(evt);
+}
+
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 34a56a1..d85296d 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,10 +28,20 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/pm.h>
#include <mach/mux.h>
#include <mach/usb.h>
+#define OTG_SYSCONFIG (OMAP34XX_HSUSB_OTG_BASE + 0x404)
+
+static void __init usb_musb_pm_init(void)
+{
+ /* Ensure force-idle mode for OTG controller */
+ if (cpu_is_omap34xx())
+ omap_writel(0, OTG_SYSCONFIG);
+}
+
+#ifdef CONFIG_USB_MUSB_SOC
+
static struct resource musb_resources[] = {
[0] = { /* start and end set dynamically */
.flags = IORESOURCE_MEM,
@@ -184,4 +194,13 @@ void __init usb_musb_init(void)
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
return;
}
+
+ usb_musb_pm_init();
+}
+
+#else
+void __init usb_musb_init(void)
+{
+ usb_musb_pm_init();
}
+#endif /* CONFIG_USB_MUSB_SOC */
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index c14d121..6f3f77d 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
+#include <linux/errno.h>
#include <mach/hardware.h>
#include "common.h"
@@ -44,6 +45,7 @@
#define TARGET_DEV_BUS 1
#define TARGET_PCI 3
#define TARGET_PCIE 4
+#define TARGET_SRAM 9
#define ATTR_PCIE_MEM 0x59
#define ATTR_PCIE_IO 0x51
#define ATTR_PCIE_WA 0x79
@@ -53,6 +55,7 @@
#define ATTR_DEV_CS1 0x1d
#define ATTR_DEV_CS2 0x1b
#define ATTR_DEV_BOOT 0xf
+#define ATTR_SRAM 0x0
/*
* Helpers to get DDR bank info
@@ -87,13 +90,13 @@ static int __init orion5x_cpu_win_can_remap(int win)
return 0;
}
-static void __init setup_cpu_win(int win, u32 base, u32 size,
+static int __init setup_cpu_win(int win, u32 base, u32 size,
u8 target, u8 attr, int remap)
{
if (win >= 8) {
printk(KERN_ERR "setup_cpu_win: trying to allocate "
"window %d\n", win);
- return;
+ return -ENOSPC;
}
writel(base & 0xffff0000, CPU_WIN_BASE(win));
@@ -107,6 +110,7 @@ static void __init setup_cpu_win(int win, u32 base, u32 size,
writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
writel(0, CPU_WIN_REMAP_HI(win));
}
+ return 0;
}
void __init orion5x_setup_cpu_mbus_bridge(void)
@@ -193,3 +197,9 @@ void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
setup_cpu_win(win_alloc_count++, base, size,
TARGET_PCIE, ATTR_PCIE_WA, -1);
}
+
+int __init orion5x_setup_sram_win(void)
+{
+ return setup_cpu_win(win_alloc_count, ORION5X_SRAM_PHYS_BASE,
+ ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1);
+}
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index b1c7778..eafcc49 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -31,7 +31,7 @@
#include <plat/ehci-orion.h>
#include <plat/mv_xor.h>
#include <plat/orion_nand.h>
-#include <plat/orion5x_wdt.h>
+#include <plat/orion_wdt.h>
#include <plat/time.h>
#include "common.h"
@@ -536,16 +536,52 @@ void __init orion5x_xor_init(void)
platform_device_register(&orion5x_xor1_channel);
}
+static struct resource orion5x_crypto_res[] = {
+ {
+ .name = "regs",
+ .start = ORION5X_CRYPTO_PHYS_BASE,
+ .end = ORION5X_CRYPTO_PHYS_BASE + 0xffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "sram",
+ .start = ORION5X_SRAM_PHYS_BASE,
+ .end = ORION5X_SRAM_PHYS_BASE + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "crypto interrupt",
+ .start = IRQ_ORION5X_CESA,
+ .end = IRQ_ORION5X_CESA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device orion5x_crypto_device = {
+ .name = "mv_crypto",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(orion5x_crypto_res),
+ .resource = orion5x_crypto_res,
+};
+
+int __init orion5x_crypto_init(void)
+{
+ int ret;
+
+ ret = orion5x_setup_sram_win();
+ if (ret)
+ return ret;
+
+ return platform_device_register(&orion5x_crypto_device);
+}
/*****************************************************************************
* Watchdog
****************************************************************************/
-static struct orion5x_wdt_platform_data orion5x_wdt_data = {
+static struct orion_wdt_platform_data orion5x_wdt_data = {
.tclk = 0,
};
static struct platform_device orion5x_wdt_device = {
- .name = "orion5x_wdt",
+ .name = "orion_wdt",
.id = -1,
.dev = {
.platform_data = &orion5x_wdt_data,
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 798b9a5..de483e8 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -26,6 +26,7 @@ void orion5x_setup_dev0_win(u32 base, u32 size);
void orion5x_setup_dev1_win(u32 base, u32 size);
void orion5x_setup_dev2_win(u32 base, u32 size);
void orion5x_setup_pcie_wa_win(u32 base, u32 size);
+int orion5x_setup_sram_win(void);
void orion5x_ehci0_init(void);
void orion5x_ehci1_init(void);
@@ -37,6 +38,7 @@ void orion5x_spi_init(void);
void orion5x_uart0_init(void);
void orion5x_uart1_init(void);
void orion5x_xor_init(void);
+int orion5x_crypto_init(void);
/*
* PCIe/PCI functions.
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index be896e5..5c9744c 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -17,8 +17,8 @@
#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104)
-#define CPU_RESET_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108)
-#define WDT_RESET 0x0002
+#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108)
+#define WDT_RESET_OUT_EN 0x0002
#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c)
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 377a773..2d87665 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -24,6 +24,7 @@
* f1000000 on-chip peripheral registers
* f2000000 PCIe I/O space
* f2100000 PCI I/O space
+ * f2200000 SRAM dedicated for the crypto unit
* f4000000 device bus mappings (boot)
* fa000000 device bus mappings (cs0)
* fa800000 device bus mappings (cs2)
@@ -49,6 +50,9 @@
#define ORION5X_PCI_IO_BUS_BASE 0x00100000
#define ORION5X_PCI_IO_SIZE SZ_1M
+#define ORION5X_SRAM_PHYS_BASE (0xf2200000)
+#define ORION5X_SRAM_SIZE SZ_8K
+
/* Relevant only for Orion-1/Orion-NAS */
#define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000
#define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000
@@ -94,6 +98,8 @@
#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000)
#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000)
+#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x90000)
+
#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000)
#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000)
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index e912490..60e734c 100644
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -23,7 +23,7 @@ static inline void arch_reset(char mode, const char *cmd)
/*
* Enable and issue soft reset
*/
- orion5x_setbits(CPU_RESET_MASK, (1 << 2));
+ orion5x_setbits(RSTOUTn_MASK, (1 << 2));
orion5x_setbits(CPU_SOFT_RESET, 1);
}
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index e23a3f9..bc4c3b9 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -124,6 +124,9 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL);
u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL);
+ /* Initialize gpiolib. */
+ orion_gpio_init();
+
while (mode->mpp >= 0) {
u32 *reg;
int num_type;
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 41e6d50..61c086b 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -181,9 +181,9 @@ static void mss2_power_off(void)
/*
* Enable and issue soft reset
*/
- reg = readl(CPU_RESET_MASK);
+ reg = readl(RSTOUTn_MASK);
reg |= 1 << 2;
- writel(reg, CPU_RESET_MASK);
+ writel(reg, RSTOUTn_MASK);
reg = readl(CPU_SOFT_RESET);
reg |= 1;
diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
index 0f9cdf4..37b3d48 100644
--- a/arch/arm/mach-orion5x/ts78xx-fpga.h
+++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
@@ -25,6 +25,7 @@ struct fpga_devices {
/* Technologic Systems */
struct fpga_device ts_rtc;
struct fpga_device ts_nand;
+ struct fpga_device ts_rng;
};
struct ts78xx_fpga_data {
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 9a6b397..5041d1b 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -17,6 +17,7 @@
#include <linux/m48t86.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/timeriomem-rng.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -270,12 +271,57 @@ static void ts78xx_ts_nand_unload(void)
}
/*****************************************************************************
+ * HW RNG
+ ****************************************************************************/
+#define TS_RNG_DATA (TS78XX_FPGA_REGS_PHYS_BASE | 0x044)
+
+static struct resource ts78xx_ts_rng_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = TS_RNG_DATA,
+ .end = TS_RNG_DATA + 4 - 1,
+};
+
+static struct timeriomem_rng_data ts78xx_ts_rng_data = {
+ .period = 1000000, /* one second */
+};
+
+static struct platform_device ts78xx_ts_rng_device = {
+ .name = "timeriomem_rng",
+ .id = -1,
+ .dev = {
+ .platform_data = &ts78xx_ts_rng_data,
+ },
+ .resource = &ts78xx_ts_rng_resource,
+ .num_resources = 1,
+};
+
+static int ts78xx_ts_rng_load(void)
+{
+ int rc;
+
+ if (ts78xx_fpga.supports.ts_rng.init == 0) {
+ rc = platform_device_register(&ts78xx_ts_rng_device);
+ if (!rc)
+ ts78xx_fpga.supports.ts_rng.init = 1;
+ } else
+ rc = platform_device_add(&ts78xx_ts_rng_device);
+
+ return rc;
+};
+
+static void ts78xx_ts_rng_unload(void)
+{
+ platform_device_del(&ts78xx_ts_rng_device);
+}
+
+/*****************************************************************************
* FPGA 'hotplug' support code
****************************************************************************/
static void ts78xx_fpga_devices_zero_init(void)
{
ts78xx_fpga.supports.ts_rtc.init = 0;
ts78xx_fpga.supports.ts_nand.init = 0;
+ ts78xx_fpga.supports.ts_rng.init = 0;
}
static void ts78xx_fpga_supports(void)
@@ -289,10 +335,12 @@ static void ts78xx_fpga_supports(void)
case TS7800_REV_5:
ts78xx_fpga.supports.ts_rtc.present = 1;
ts78xx_fpga.supports.ts_nand.present = 1;
+ ts78xx_fpga.supports.ts_rng.present = 1;
break;
default:
ts78xx_fpga.supports.ts_rtc.present = 0;
ts78xx_fpga.supports.ts_nand.present = 0;
+ ts78xx_fpga.supports.ts_rng.present = 0;
}
}
@@ -316,6 +364,14 @@ static int ts78xx_fpga_load_devices(void)
}
ret |= tmp;
}
+ if (ts78xx_fpga.supports.ts_rng.present == 1) {
+ tmp = ts78xx_ts_rng_load();
+ if (tmp) {
+ printk(KERN_INFO "TS-78xx: RNG not registered\n");
+ ts78xx_fpga.supports.ts_rng.present = 0;
+ }
+ ret |= tmp;
+ }
return ret;
}
@@ -328,6 +384,8 @@ static int ts78xx_fpga_unload_devices(void)
ts78xx_ts_rtc_unload();
if (ts78xx_fpga.supports.ts_nand.present == 1)
ts78xx_ts_nand_unload();
+ if (ts78xx_fpga.supports.ts_rng.present == 1)
+ ts78xx_ts_rng_unload();
return ret;
}
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 7ddc22c..6920821 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -15,6 +15,7 @@
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
+#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include <asm/mach/arch.h>
@@ -97,6 +98,20 @@ static struct mv643xx_eth_platform_data wnr854t_eth_data = {
.duplex = DUPLEX_FULL,
};
+static struct dsa_chip_data wnr854t_switch_chip_data = {
+ .port_names[0] = "lan3",
+ .port_names[1] = "lan4",
+ .port_names[2] = "wan",
+ .port_names[3] = "cpu",
+ .port_names[5] = "lan1",
+ .port_names[7] = "lan2",
+};
+
+static struct dsa_platform_data wnr854t_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &wnr854t_switch_chip_data,
+};
+
static void __init wnr854t_init(void)
{
/*
@@ -110,6 +125,7 @@ static void __init wnr854t_init(void)
* Configure peripherals.
*/
orion5x_eth_init(&wnr854t_eth_data);
+ orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 17d3fbd..f4533f8 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -51,6 +51,12 @@ config MACH_INTELMOTE2
select IWMMXT
select PXA_HAVE_BOARD_IRQS
+config MACH_STARGATE2
+ bool "Intel Stargate 2 Platform"
+ select PXA27x
+ select IWMMXT
+ select PXA_HAVE_BOARD_IRQS
+
config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform"
select PXA25x
@@ -88,6 +94,10 @@ config PXA_SHARPSL
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
+config SHARPSL_PM
+ bool
+ select APM_EMULATION
+
config CORGI_SSP_DEPRECATED
bool
select PXA_SSP
@@ -280,6 +290,7 @@ config MACH_ZYLONITE
select PXA3xx
select PXA_SSP
select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
@@ -308,6 +319,14 @@ config MACH_CM_X300
select PXA3xx
select CPU_PXA300
+config MACH_H4700
+ bool "HP iPAQ hx4700"
+ select PXA27x
+ select IWMMXT
+ select PXA_SSP
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
select PXA27x
@@ -505,12 +524,6 @@ config PXA_SSP
help
Enable support for PXA2xx SSP ports
-config PXA_PWM
- tristate
- default BACKLIGHT_PWM
- help
- Enable support for PXA2xx/PXA3xx PWM controllers
-
config TOSA_BT
tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
depends on MACH_TOSA
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 682dbf4..d18ffef 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -15,7 +15,6 @@ endif
# Generic drivers that other drivers may depend upon
obj-$(CONFIG_PXA_SSP) += ssp.o
-obj-$(CONFIG_PXA_PWM) += pwm.o
# SoC-specific code
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o
@@ -47,6 +46,7 @@ obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
+obj-$(CONFIG_MACH_H4700) += hx4700.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
@@ -78,6 +78,7 @@ obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
obj-$(CONFIG_PXA_EZX) += ezx.o
obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
+obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
obj-$(CONFIG_MACH_CSB726) += csb726.o
obj-$(CONFIG_CSB726_CSB701) += csb701.o
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index db52d2c..49ae382 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -86,20 +86,3 @@ void clks_register(struct clk_lookup *clks, size_t num)
for (i = 0; i < num; i++)
clkdev_add(&clks[i]);
}
-
-int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
- struct device *dev)
-{
- struct clk *r = clk_get(dev, id);
- struct clk_lookup *l;
-
- if (!r)
- return -ENODEV;
-
- l = clkdev_alloc(r, alias, alias_dev_name);
- clk_put(r);
- if (!l)
- return -ENODEV;
- clkdev_add(l);
- return 0;
-}
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 34576ba..1d2cec2 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -335,6 +335,10 @@ void __init cmx270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
+#ifdef CONFIG_PM
+ pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
cmx270_init_rtc();
cmx270_init_mmc();
cmx270_init_ohci();
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index a9f48b1..465da26 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -21,18 +21,20 @@
#include <linux/gpio.h>
#include <linux/dm9000.h>
#include <linux/leds.h>
+#include <linux/rtc-v3020.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/setup.h>
#include <mach/pxa300.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/pxa3xx_nand.h>
#include <asm/mach/map.h>
@@ -46,6 +48,11 @@
#define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ)
+#define GPIO95_RTC_CS (95)
+#define GPIO96_RTC_WR (96)
+#define GPIO97_RTC_RD (97)
+#define GPIO98_RTC_IO (98)
+
static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
/* LCD */
GPIO54_LCD_LDD_0,
@@ -135,6 +142,12 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
GPIO85_GPIO, /* MMC WP */
GPIO99_GPIO, /* Ethernet IRQ */
+ /* RTC GPIOs */
+ GPIO95_GPIO, /* RTC CS */
+ GPIO96_GPIO, /* RTC WR */
+ GPIO97_GPIO, /* RTC RD */
+ GPIO98_GPIO, /* RTC IO */
+
/* Standard I2C */
GPIO21_I2C_SCL,
GPIO22_I2C_SDA,
@@ -265,6 +278,7 @@ static struct mtd_partition cm_x300_nand_partitions[] = {
static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
.enable_arbiter = 1,
+ .keep_config = 1,
.parts = cm_x300_nand_partitions,
.nr_parts = ARRAY_SIZE(cm_x300_nand_partitions),
};
@@ -441,6 +455,31 @@ static void __init cm_x300_init_i2c(void)
static inline void cm_x300_init_i2c(void) {}
#endif
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
+struct v3020_platform_data cm_x300_v3020_pdata = {
+ .use_gpio = 1,
+ .gpio_cs = GPIO95_RTC_CS,
+ .gpio_wr = GPIO96_RTC_WR,
+ .gpio_rd = GPIO97_RTC_RD,
+ .gpio_io = GPIO98_RTC_IO,
+};
+
+static struct platform_device cm_x300_rtc_device = {
+ .name = "v3020",
+ .id = -1,
+ .dev = {
+ .platform_data = &cm_x300_v3020_pdata,
+ }
+};
+
+static void __init cm_x300_init_rtc(void)
+{
+ platform_device_register(&cm_x300_rtc_device);
+}
+#else
+static inline void cm_x300_init_rtc(void) {}
+#endif
+
static void __init cm_x300_init(void)
{
/* board-processor specific GPIO initialization */
@@ -453,6 +492,19 @@ static void __init cm_x300_init(void)
cm_x300_init_nand();
cm_x300_init_leds();
cm_x300_init_i2c();
+ cm_x300_init_rtc();
+}
+
+static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
+ char **cmdline, struct meminfo *mi)
+{
+ mi->nr_banks = 2;
+ mi->bank[0].start = 0xa0000000;
+ mi->bank[0].node = 0;
+ mi->bank[0].size = (64*1024*1024);
+ mi->bank[1].start = 0xc0000000;
+ mi->bank[1].node = 0;
+ mi->bank[1].size = (64*1024*1024);
}
MACHINE_START(CM_X300, "CM-X300 module")
@@ -463,4 +515,5 @@ MACHINE_START(CM_X300, "CM-X300 module")
.init_irq = pxa3xx_init_irq,
.timer = &pxa_timer,
.init_machine = cm_x300_init,
+ .fixup = cm_x300_fixup,
MACHINE_END
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 930e364..962dda2 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -42,7 +42,7 @@
#include <asm/mach/irq.h>
#include <mach/pxa25x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/irda.h>
#include <mach/mmc.h>
#include <mach/udc.h>
@@ -445,13 +445,8 @@ static struct ads7846_platform_data corgi_ads7846_info = {
.wait_for_sync = corgi_wait_for_hsync,
};
-static void corgi_ads7846_cs(u32 command)
-{
- gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
static struct pxa2xx_spi_chip corgi_ads7846_chip = {
- .cs_control = corgi_ads7846_cs,
+ .gpio_cs = CORGI_GPIO_ADS7846_CS,
};
static void corgi_bl_kick_battery(void)
@@ -475,22 +470,12 @@ static struct corgi_lcd_platform_data corgi_lcdcon_info = {
.kick_battery = corgi_bl_kick_battery,
};
-static void corgi_lcdcon_cs(u32 command)
-{
- gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
- .cs_control = corgi_lcdcon_cs,
+ .gpio_cs = CORGI_GPIO_LCDCON_CS,
};
-static void corgi_max1111_cs(u32 command)
-{
- gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
static struct pxa2xx_spi_chip corgi_max1111_chip = {
- .cs_control = corgi_max1111_cs,
+ .gpio_cs = CORGI_GPIO_MAX1111_CS,
};
static struct spi_board_info corgi_spi_devices[] = {
@@ -520,32 +505,8 @@ static struct spi_board_info corgi_spi_devices[] = {
static void __init corgi_init_spi(void)
{
- int err;
-
- err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS");
- if (err)
- return;
-
- err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS");
- if (err)
- goto err_free_1;
-
- err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS");
- if (err)
- goto err_free_2;
-
- gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1);
- gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1);
- gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1);
-
pxa2xx_set_spi_info(1, &corgi_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
- return;
-
-err_free_2:
- gpio_free(CORGI_GPIO_LCDCON_CS);
-err_free_1:
- gpio_free(CORGI_GPIO_ADS7846_CS);
}
#else
static inline void corgi_init_spi(void) {}
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 7f04b3a..a093282 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -41,7 +41,6 @@ static void corgi_charger_init(void)
pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT);
pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT);
pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN);
- sharpsl_pm_pxa_init();
}
static void corgi_measure_temp(int on)
@@ -191,7 +190,7 @@ unsigned long corgipm_read_devdata(int type)
static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
.init = corgi_charger_init,
- .exit = sharpsl_pm_pxa_remove,
+ .exit = NULL,
.gpio_batlock = CORGI_GPIO_BAT_COVER,
.gpio_acin = CORGI_GPIO_AC_IN,
.gpio_batfull = CORGI_GPIO_CHRG_FULL,
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 083a1d8..3a8ee22 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -36,6 +36,8 @@
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
#include <mach/pxa2xx-regs.h>
@@ -47,6 +49,8 @@ MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
#define freq_debug 0
#endif
+static struct regulator *vcc_core;
+
static unsigned int pxa27x_maxfreq;
module_param(pxa27x_maxfreq, uint, 0);
MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
@@ -58,6 +62,8 @@ typedef struct {
unsigned int cccr;
unsigned int div2;
unsigned int cclkcfg;
+ int vmin;
+ int vmax;
} pxa_freqs_t;
/* Define the refresh period in mSec for the SDRAM and the number of rows */
@@ -82,24 +88,24 @@ static unsigned int sdram_rows;
static pxa_freqs_t pxa255_run_freqs[] =
{
- /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
- { 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */
- {132700, 132700, 0x123, 1, CCLKCFG}, /* 133, 133, 66, 66 */
- {199100, 99500, 0x141, 0, CCLKCFG}, /* 199, 199, 99, 99 */
- {265400, 132700, 0x143, 1, CCLKCFG}, /* 265, 265, 133, 66 */
- {331800, 165900, 0x145, 1, CCLKCFG}, /* 331, 331, 166, 83 */
- {398100, 99500, 0x161, 0, CCLKCFG}, /* 398, 398, 196, 99 */
+ /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
+ { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */
+ {132700, 132700, 0x123, 1, CCLKCFG, -1, -1}, /* 133, 133, 66, 66 */
+ {199100, 99500, 0x141, 0, CCLKCFG, -1, -1}, /* 199, 199, 99, 99 */
+ {265400, 132700, 0x143, 1, CCLKCFG, -1, -1}, /* 265, 265, 133, 66 */
+ {331800, 165900, 0x145, 1, CCLKCFG, -1, -1}, /* 331, 331, 166, 83 */
+ {398100, 99500, 0x161, 0, CCLKCFG, -1, -1}, /* 398, 398, 196, 99 */
};
/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
static pxa_freqs_t pxa255_turbo_freqs[] =
{
/* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */
- { 99500, 99500, 0x121, 1, CCLKCFG}, /* 99, 99, 50, 50 */
- {199100, 99500, 0x221, 0, CCLKCFG}, /* 99, 199, 50, 99 */
- {298500, 99500, 0x321, 0, CCLKCFG}, /* 99, 287, 50, 99 */
- {298600, 99500, 0x1c1, 0, CCLKCFG}, /* 199, 287, 99, 99 */
- {398100, 99500, 0x241, 0, CCLKCFG}, /* 199, 398, 99, 99 */
+ { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */
+ {199100, 99500, 0x221, 0, CCLKCFG, -1, -1}, /* 99, 199, 50, 99 */
+ {298500, 99500, 0x321, 0, CCLKCFG, -1, -1}, /* 99, 287, 50, 99 */
+ {298600, 99500, 0x1c1, 0, CCLKCFG, -1, -1}, /* 199, 287, 99, 99 */
+ {398100, 99500, 0x241, 0, CCLKCFG, -1, -1}, /* 199, 398, 99, 99 */
};
#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
@@ -148,13 +154,13 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table
((T) ? CCLKCFG_TURBO : 0))
static pxa_freqs_t pxa27x_freqs[] = {
- {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1)},
- {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1)},
- {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1)},
- {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1)},
- {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1)},
- {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1)},
- {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1)}
+ {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 },
+ {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 },
+ {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
+ {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
+ {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
+ {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 },
+ {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 }
};
#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
@@ -163,6 +169,47 @@ static struct cpufreq_frequency_table
extern unsigned get_clk_frequency_khz(int info);
+#ifdef CONFIG_REGULATOR
+
+static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
+{
+ int ret = 0;
+ int vmin, vmax;
+
+ if (!cpu_is_pxa27x())
+ return 0;
+
+ vmin = pxa_freq->vmin;
+ vmax = pxa_freq->vmax;
+ if ((vmin == -1) || (vmax == -1))
+ return 0;
+
+ ret = regulator_set_voltage(vcc_core, vmin, vmax);
+ if (ret)
+ pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n",
+ vmin, vmax);
+ return ret;
+}
+
+static __init void pxa_cpufreq_init_voltages(void)
+{
+ vcc_core = regulator_get(NULL, "vcc_core");
+ if (IS_ERR(vcc_core)) {
+ pr_info("cpufreq: Didn't find vcc_core regulator\n");
+ vcc_core = NULL;
+ } else {
+ pr_info("cpufreq: Found vcc_core regulator\n");
+ }
+}
+#else
+static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
+{
+ return 0;
+}
+
+static __init void pxa_cpufreq_init_voltages(void) { }
+#endif
+
static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
pxa_freqs_t **pxa_freqs)
{
@@ -251,6 +298,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
unsigned long flags;
unsigned int new_freq_cpu, new_freq_mem;
unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
+ int ret = 0;
/* Get the current policy */
find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
@@ -273,6 +321,10 @@ static int pxa_set_target(struct cpufreq_policy *policy,
freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
(new_freq_mem / 2000) : (new_freq_mem / 1000));
+ if (vcc_core && freqs.new > freqs.old)
+ ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
+ if (ret)
+ return ret;
/*
* Tell everyone what we're about to do...
* you should add a notify client with any platform specific
@@ -335,6 +387,18 @@ static int pxa_set_target(struct cpufreq_policy *policy,
*/
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ /*
+ * Even if voltage setting fails, we don't report it, as the frequency
+ * change succeeded. The voltage reduction is not a critical failure,
+ * only power savings will suffer from this.
+ *
+ * Note: if the voltage change fails, and a return value is returned, a
+ * bug is triggered (seems a deadlock). Should anybody find out where,
+ * the "return 0" should become a "return ret".
+ */
+ if (vcc_core && freqs.new < freqs.old)
+ ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
+
return 0;
}
@@ -349,6 +413,8 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
if (cpu_is_pxa27x())
pxa27x_guess_max_freq();
+ pxa_cpufreq_init_voltages();
+
init_sdram_rows();
/* set default policy and cpuinfo */
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 2b289f8..7d3e1b4 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -16,15 +16,17 @@
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/sm501.h>
+#include <linux/smsc911x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/csb726.h>
#include <mach/mfp-pxa27x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <mach/pxa2xx-regs.h>
+#include <mach/audio.h>
#include "generic.h"
#include "devices.h"
@@ -275,15 +277,26 @@ static struct resource csb726_lan_resources[] = {
{
.start = CSB726_IRQ_LAN,
.end = CSB726_IRQ_LAN,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
+struct smsc911x_platform_config csb726_lan_config = {
+ .irq_type = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_32BIT,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+
static struct platform_device csb726_lan = {
- .name = "smc911x",
+ .name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(csb726_lan_resources),
.resource = csb726_lan_resources,
+ .dev = {
+ .platform_data = &csb726_lan_config,
+ },
};
static struct platform_device *devices[] __initdata = {
@@ -303,6 +316,7 @@ static void __init csb726_init(void)
pxa27x_set_i2c_power_info(NULL);
pxa_set_mci_info(&csb726_mci);
pxa_set_ohci_info(&csb726_ohci_platform_data);
+ pxa_set_ac97_info(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 29970f7..ecc08f3 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -8,7 +8,7 @@
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/irda.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/ohci.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxa2xx_spi.h>
@@ -290,7 +290,7 @@ static struct resource pxa3xx_resources_i2c_power[] = {
};
struct platform_device pxa3xx_device_i2c_power = {
- .name = "pxa2xx-i2c",
+ .name = "pxa3xx-pwri2c",
.id = 1,
.resource = pxa3xx_resources_i2c_power,
.num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power),
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index bc0f73f..243e080 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -28,6 +28,8 @@
#include <linux/spi/libertas_spi.h>
#include <linux/power_supply.h>
#include <linux/apm-emulation.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
#include <media/soc_camera.h>
@@ -41,7 +43,7 @@
#include <mach/ohci.h>
#include <mach/mmc.h>
#include <mach/pxa27x_keypad.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/camera.h>
#include <mach/pxa2xx_spi.h>
@@ -52,23 +54,31 @@
#define GPIO13_MMC_CD (13)
#define GPIO95_MMC_WP (95)
#define GPIO56_NAND_RB (56)
+#define GPIO93_CAM_RESET (93)
+#define GPIO16_USB_HUB_RESET (16)
/* eXeda specific GPIOs */
#define GPIO114_MMC_CD (114)
#define GPIO20_NAND_RB (20)
#define GPIO38_SD_PWEN (38)
+#define GPIO37_WLAN_RST (37)
+#define GPIO95_TOUCHPAD_INT (95)
+#define GPIO130_CAM_RESET (130)
+#define GPIO10_USB_HUB_RESET (10)
/* common GPIOs */
#define GPIO11_NAND_CS (11)
-#define GPIO93_CAM_RESET (93)
#define GPIO41_ETHIRQ (41)
#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
#define GPIO115_WLAN_PWEN (115)
#define GPIO19_WLAN_STRAP (19)
+#define GPIO9_USB_VBUS_EN (9)
static int mmc_cd;
static int nand_rb;
static int dm9000_flags;
+static int cam_reset;
+static int usb_hub_reset;
static unsigned long common_pin_config[] = {
/* AC'97 */
@@ -180,7 +190,6 @@ static unsigned long common_pin_config[] = {
/* power controls */
GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
- GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */
GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */
/* NAND controls */
@@ -191,14 +200,18 @@ static unsigned long common_pin_config[] = {
};
static unsigned long em_x270_pin_config[] = {
- GPIO13_GPIO, /* MMC card detect */
- GPIO56_GPIO, /* NAND Ready/Busy */
- GPIO95_GPIO, /* MMC Write protect */
+ GPIO13_GPIO, /* MMC card detect */
+ GPIO16_GPIO, /* USB hub reset */
+ GPIO56_GPIO, /* NAND Ready/Busy */
+ GPIO93_GPIO | MFP_LPM_DRIVE_LOW, /* Camera reset */
+ GPIO95_GPIO, /* MMC Write protect */
};
static unsigned long exeda_pin_config[] = {
+ GPIO10_GPIO, /* USB hub reset */
GPIO20_GPIO, /* NAND Ready/Busy */
GPIO38_GPIO | MFP_LPM_DRIVE_LOW, /* SD slot power */
+ GPIO95_GPIO, /* touchpad IRQ */
GPIO114_GPIO, /* MMC card detect */
};
@@ -464,18 +477,79 @@ static inline void em_x270_init_nor(void) {}
/* PXA27x OHCI controller setup */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct regulator *em_x270_usb_ldo;
+
+static int em_x270_usb_hub_init(void)
+{
+ int err;
+
+ em_x270_usb_ldo = regulator_get(NULL, "vcc usb");
+ if (IS_ERR(em_x270_usb_ldo))
+ return PTR_ERR(em_x270_usb_ldo);
+
+ err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en");
+ if (err)
+ goto err_free_usb_ldo;
+
+ err = gpio_request(usb_hub_reset, "hub rst");
+ if (err)
+ goto err_free_vbus_gpio;
+
+ /* USB Hub power-on and reset */
+ gpio_direction_output(usb_hub_reset, 0);
+ regulator_enable(em_x270_usb_ldo);
+ gpio_set_value(usb_hub_reset, 1);
+ gpio_set_value(usb_hub_reset, 0);
+ regulator_disable(em_x270_usb_ldo);
+ regulator_enable(em_x270_usb_ldo);
+ gpio_set_value(usb_hub_reset, 1);
+
+ /* enable VBUS */
+ gpio_direction_output(GPIO9_USB_VBUS_EN, 1);
+
+ return 0;
+
+err_free_vbus_gpio:
+ gpio_free(GPIO9_USB_VBUS_EN);
+err_free_usb_ldo:
+ regulator_put(em_x270_usb_ldo);
+
+ return err;
+}
+
static int em_x270_ohci_init(struct device *dev)
{
+ int err;
+
+ /* we don't want to entirely disable USB if the HUB init failed */
+ err = em_x270_usb_hub_init();
+ if (err)
+ pr_err("USB Hub initialization failed: %d\n", err);
+
/* enable port 2 transiever */
UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
return 0;
}
+static void em_x270_ohci_exit(struct device *dev)
+{
+ gpio_free(usb_hub_reset);
+ gpio_free(GPIO9_USB_VBUS_EN);
+
+ if (!IS_ERR(em_x270_usb_ldo)) {
+ if (regulator_is_enabled(em_x270_usb_ldo))
+ regulator_disable(em_x270_usb_ldo);
+
+ regulator_put(em_x270_usb_ldo);
+ }
+}
+
static struct pxaohci_platform_data em_x270_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
.init = em_x270_ohci_init,
+ .exit = em_x270_ohci_exit,
};
static void __init em_x270_init_ohci(void)
@@ -677,26 +751,52 @@ static int em_x270_libertas_setup(struct spi_device *spi)
if (err)
return err;
+ err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+ if (err)
+ goto err_free_pwen;
+
+ if (machine_is_exeda()) {
+ err = gpio_request(GPIO37_WLAN_RST, "WLAN RST");
+ if (err)
+ goto err_free_strap;
+
+ gpio_direction_output(GPIO37_WLAN_RST, 1);
+ msleep(100);
+ }
+
gpio_direction_output(GPIO19_WLAN_STRAP, 1);
- mdelay(100);
+ msleep(100);
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
gpio_direction_output(GPIO115_WLAN_PWEN, 0);
- mdelay(100);
+ msleep(100);
gpio_set_value(GPIO115_WLAN_PWEN, 1);
- mdelay(100);
+ msleep(100);
spi->bits_per_word = 16;
spi_setup(spi);
return 0;
+
+err_free_strap:
+ gpio_free(GPIO19_WLAN_STRAP);
+err_free_pwen:
+ gpio_free(GPIO115_WLAN_PWEN);
+
+ return err;
}
static int em_x270_libertas_teardown(struct spi_device *spi)
{
gpio_set_value(GPIO115_WLAN_PWEN, 0);
gpio_free(GPIO115_WLAN_PWEN);
+ gpio_free(GPIO19_WLAN_STRAP);
+
+ if (machine_is_exeda()) {
+ gpio_set_value(GPIO37_WLAN_RST, 0);
+ gpio_free(GPIO37_WLAN_RST);
+ }
return 0;
}
@@ -863,26 +963,26 @@ static int em_x270_sensor_init(struct device *dev)
{
int ret;
- ret = gpio_request(GPIO93_CAM_RESET, "camera reset");
+ ret = gpio_request(cam_reset, "camera reset");
if (ret)
return ret;
- gpio_direction_output(GPIO93_CAM_RESET, 0);
+ gpio_direction_output(cam_reset, 0);
em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
if (em_x270_camera_ldo == NULL) {
- gpio_free(GPIO93_CAM_RESET);
+ gpio_free(cam_reset);
return -ENODEV;
}
ret = regulator_enable(em_x270_camera_ldo);
if (ret) {
regulator_put(em_x270_camera_ldo);
- gpio_free(GPIO93_CAM_RESET);
+ gpio_free(cam_reset);
return ret;
}
- gpio_set_value(GPIO93_CAM_RESET, 1);
+ gpio_set_value(cam_reset, 1);
return 0;
}
@@ -902,7 +1002,7 @@ static int em_x270_sensor_power(struct device *dev, int on)
if (on == is_on)
return 0;
- gpio_set_value(GPIO93_CAM_RESET, !on);
+ gpio_set_value(cam_reset, !on);
if (on)
ret = regulator_enable(em_x270_camera_ldo);
@@ -912,7 +1012,7 @@ static int em_x270_sensor_power(struct device *dev, int on)
if (ret)
return ret;
- gpio_set_value(GPIO93_CAM_RESET, on);
+ gpio_set_value(cam_reset, on);
return 0;
}
@@ -929,13 +1029,8 @@ static struct i2c_board_info em_x270_i2c_cam_info[] = {
},
};
-static struct i2c_pxa_platform_data em_x270_i2c_info = {
- .fast_mode = 1,
-};
-
static void __init em_x270_init_camera(void)
{
- pxa_set_i2c_info(&em_x270_i2c_info);
i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
pxa_set_camera_info(&em_x270_camera_platform_data);
}
@@ -985,7 +1080,7 @@ struct led_info em_x270_led_info = {
};
struct power_supply_info em_x270_psy_info = {
- .name = "LP555597P6H-FPS",
+ .name = "battery",
.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
.voltage_max_design = 4200000,
.voltage_min_design = 3000000,
@@ -1069,6 +1164,29 @@ static void __init em_x270_init_da9030(void)
i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
}
+static struct pca953x_platform_data exeda_gpio_ext_pdata = {
+ .gpio_base = 128,
+};
+
+static struct i2c_board_info exeda_i2c_info[] = {
+ {
+ I2C_BOARD_INFO("pca9555", 0x21),
+ .platform_data = &exeda_gpio_ext_pdata,
+ },
+};
+
+static struct i2c_pxa_platform_data em_x270_i2c_info = {
+ .fast_mode = 1,
+};
+
+static void __init em_x270_init_i2c(void)
+{
+ pxa_set_i2c_info(&em_x270_i2c_info);
+
+ if (machine_is_exeda())
+ i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
+}
+
static void __init em_x270_module_init(void)
{
pr_info("%s\n", __func__);
@@ -1077,6 +1195,8 @@ static void __init em_x270_module_init(void)
mmc_cd = GPIO13_MMC_CD;
nand_rb = GPIO56_NAND_RB;
dm9000_flags = DM9000_PLATF_32BITONLY;
+ cam_reset = GPIO93_CAM_RESET;
+ usb_hub_reset = GPIO16_USB_HUB_RESET;
}
static void __init em_x270_exeda_init(void)
@@ -1087,12 +1207,18 @@ static void __init em_x270_exeda_init(void)
mmc_cd = GPIO114_MMC_CD;
nand_rb = GPIO20_NAND_RB;
dm9000_flags = DM9000_PLATF_16BITONLY;
+ cam_reset = GPIO130_CAM_RESET;
+ usb_hub_reset = GPIO10_USB_HUB_RESET;
}
static void __init em_x270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
+#ifdef CONFIG_PM
+ pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+#endif
+
if (machine_is_em_x270())
em_x270_module_init();
else if (machine_is_exeda())
@@ -1111,8 +1237,9 @@ static void __init em_x270_init(void)
em_x270_init_keypad();
em_x270_init_gpio_keys();
em_x270_init_ac97();
- em_x270_init_camera();
em_x270_init_spi();
+ em_x270_init_i2c();
+ em_x270_init_camera();
}
MACHINE_START(EM_X270, "Compulab EM-X270")
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 7db966d..588b265 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -17,6 +17,7 @@
#include <linux/delay.h>
#include <linux/pwm_backlight.h>
#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -25,13 +26,19 @@
#include <mach/pxa27x.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/hardware.h>
#include <mach/pxa27x_keypad.h>
#include "devices.h"
#include "generic.h"
+#define GPIO12_A780_FLIP_LID 12
+#define GPIO15_A1200_FLIP_LID 15
+#define GPIO15_A910_FLIP_LID 15
+#define GPIO12_E680_LOCK_SWITCH 12
+#define GPIO15_E6_LOCK_SWITCH 15
+
static struct platform_pwm_backlight_data ezx_backlight_data = {
.pwm_id = 0,
.max_brightness = 1023,
@@ -88,7 +95,7 @@ static struct pxafb_mach_info ezx_fb_info_2 = {
.lcd_conn = LCD_COLOR_TFT_18BPP,
};
-static struct platform_device *devices[] __initdata = {
+static struct platform_device *ezx_devices[] __initdata = {
&ezx_backlight_device,
};
@@ -651,6 +658,35 @@ static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
#endif /* CONFIG_MACH_EZX_E2 */
#ifdef CONFIG_MACH_EZX_A780
+/* gpio_keys */
+static struct gpio_keys_button a780_buttons[] = {
+ [0] = {
+ .code = SW_LID,
+ .gpio = GPIO12_A780_FLIP_LID,
+ .active_low = 0,
+ .desc = "A780 flip lid",
+ .type = EV_SW,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
+ .buttons = a780_buttons,
+ .nbuttons = ARRAY_SIZE(a780_buttons),
+};
+
+static struct platform_device a780_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &a780_gpio_keys_platform_data,
+ },
+};
+
+static struct platform_device *a780_devices[] __initdata = {
+ &a780_gpio_keys,
+};
+
static void __init a780_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -663,7 +699,8 @@ static void __init a780_init(void)
pxa_set_keypad_info(&a780_keypad_platform_data);
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(a780_devices));
}
MACHINE_START(EZX_A780, "Motorola EZX A780")
@@ -678,10 +715,39 @@ MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_E680
+/* gpio_keys */
+static struct gpio_keys_button e680_buttons[] = {
+ [0] = {
+ .code = KEY_SCREENLOCK,
+ .gpio = GPIO12_E680_LOCK_SWITCH,
+ .active_low = 0,
+ .desc = "E680 lock switch",
+ .type = EV_KEY,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
+ .buttons = e680_buttons,
+ .nbuttons = ARRAY_SIZE(e680_buttons),
+};
+
+static struct platform_device e680_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &e680_gpio_keys_platform_data,
+ },
+};
+
static struct i2c_board_info __initdata e680_i2c_board_info[] = {
{ I2C_BOARD_INFO("tea5767", 0x81) },
};
+static struct platform_device *e680_devices[] __initdata = {
+ &e680_gpio_keys,
+};
+
static void __init e680_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -695,7 +761,8 @@ static void __init e680_init(void)
pxa_set_keypad_info(&e680_keypad_platform_data);
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(e680_devices));
}
MACHINE_START(EZX_E680, "Motorola EZX E680")
@@ -710,10 +777,39 @@ MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_A1200
+/* gpio_keys */
+static struct gpio_keys_button a1200_buttons[] = {
+ [0] = {
+ .code = SW_LID,
+ .gpio = GPIO15_A1200_FLIP_LID,
+ .active_low = 0,
+ .desc = "A1200 flip lid",
+ .type = EV_SW,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
+ .buttons = a1200_buttons,
+ .nbuttons = ARRAY_SIZE(a1200_buttons),
+};
+
+static struct platform_device a1200_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &a1200_gpio_keys_platform_data,
+ },
+};
+
static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
{ I2C_BOARD_INFO("tea5767", 0x81) },
};
+static struct platform_device *a1200_devices[] __initdata = {
+ &a1200_gpio_keys,
+};
+
static void __init a1200_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -727,7 +823,8 @@ static void __init a1200_init(void)
pxa_set_keypad_info(&a1200_keypad_platform_data);
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
}
MACHINE_START(EZX_A1200, "Motorola EZX A1200")
@@ -742,6 +839,35 @@ MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_A910
+/* gpio_keys */
+static struct gpio_keys_button a910_buttons[] = {
+ [0] = {
+ .code = SW_LID,
+ .gpio = GPIO15_A910_FLIP_LID,
+ .active_low = 0,
+ .desc = "A910 flip lid",
+ .type = EV_SW,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
+ .buttons = a910_buttons,
+ .nbuttons = ARRAY_SIZE(a910_buttons),
+};
+
+static struct platform_device a910_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &a910_gpio_keys_platform_data,
+ },
+};
+
+static struct platform_device *a910_devices[] __initdata = {
+ &a910_gpio_keys,
+};
+
static void __init a910_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -754,7 +880,8 @@ static void __init a910_init(void)
pxa_set_keypad_info(&a910_keypad_platform_data);
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(a910_devices));
}
MACHINE_START(EZX_A910, "Motorola EZX A910")
@@ -769,10 +896,39 @@ MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_E6
+/* gpio_keys */
+static struct gpio_keys_button e6_buttons[] = {
+ [0] = {
+ .code = KEY_SCREENLOCK,
+ .gpio = GPIO15_E6_LOCK_SWITCH,
+ .active_low = 0,
+ .desc = "E6 lock switch",
+ .type = EV_KEY,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
+ .buttons = e6_buttons,
+ .nbuttons = ARRAY_SIZE(e6_buttons),
+};
+
+static struct platform_device e6_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &e6_gpio_keys_platform_data,
+ },
+};
+
static struct i2c_board_info __initdata e6_i2c_board_info[] = {
{ I2C_BOARD_INFO("tea5767", 0x81) },
};
+static struct platform_device *e6_devices[] __initdata = {
+ &e6_gpio_keys,
+};
+
static void __init e6_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -786,7 +942,8 @@ static void __init e6_init(void)
pxa_set_keypad_info(&e6_keypad_platform_data);
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(e6_devices));
}
MACHINE_START(EZX_E6, "Motorola EZX E6")
@@ -805,6 +962,9 @@ static struct i2c_board_info __initdata e2_i2c_board_info[] = {
{ I2C_BOARD_INFO("tea5767", 0x81) },
};
+static struct platform_device *e2_devices[] __initdata = {
+};
+
static void __init e2_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
@@ -818,7 +978,8 @@ static void __init e2_init(void)
pxa_set_keypad_info(&e2_keypad_platform_data);
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
+ platform_add_devices(ARRAY_AND_SIZE(e2_devices));
}
MACHINE_START(EZX_E2, "Motorola EZX E2")
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
new file mode 100644
index 0000000..7fff467
--- /dev/null
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -0,0 +1,851 @@
+/*
+ * Support for HP iPAQ hx4700 PDAs.
+ *
+ * Copyright (c) 2008-2009 Philipp Zabel
+ *
+ * Based on code:
+ * Copyright (c) 2004 Hewlett-Packard Company.
+ * Copyright (c) 2005 SDG Systems, LLC
+ * Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/lcd.h>
+#include <linux/mfd/htc-egpio.h>
+#include <linux/mfd/asic3.h>
+#include <linux/mtd/physmap.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/bq24022.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/gpio_vbus.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/hx4700.h>
+#include <plat/i2c.h>
+#include <mach/irda.h>
+#include <mach/pxa2xx_spi.h>
+
+#include <video/w100fb.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Physical address space information */
+
+#define ATI_W3220_PHYS PXA_CS2_PHYS /* ATI Imageon 3220 Graphics */
+#define ASIC3_PHYS PXA_CS3_PHYS
+#define ASIC3_SD_PHYS (PXA_CS3_PHYS + 0x02000000)
+
+static unsigned long hx4700_pin_config[] __initdata = {
+
+ /* SDRAM and Static Memory I/O Signals */
+ GPIO20_nSDCS_2,
+ GPIO21_nSDCS_3,
+ GPIO15_nCS_1,
+ GPIO78_nCS_2, /* W3220 */
+ GPIO79_nCS_3, /* ASIC3 */
+ GPIO80_nCS_4,
+ GPIO33_nCS_5, /* EGPIO, WLAN */
+
+ /* PC CARD */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO85_nPCE_1,
+ GPIO104_PSKTSEL,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* FFUART (RS-232) */
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO36_FFUART_DCD,
+ GPIO37_FFUART_DSR,
+ GPIO38_FFUART_RI,
+ GPIO39_FFUART_TXD,
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* PWM 1 (Backlight) */
+ GPIO17_PWM1_OUT,
+
+ /* I2S */
+ GPIO28_I2S_BITCLK_OUT,
+ GPIO29_I2S_SDATA_IN,
+ GPIO30_I2S_SDATA_OUT,
+ GPIO31_I2S_SYNC,
+ GPIO113_I2S_SYSCLK,
+
+ /* SSP 1 (NavPoint) */
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+
+ /* SSP 2 (TSC2046) */
+ GPIO19_SSP2_SCLK,
+ GPIO86_SSP2_RXD,
+ GPIO87_SSP2_TXD,
+ GPIO88_GPIO,
+
+ /* HX4700 specific input GPIOs */
+ GPIO12_GPIO, /* ASIC3_IRQ */
+ GPIO13_GPIO, /* W3220_IRQ */
+ GPIO14_GPIO, /* nWLAN_IRQ */
+
+ GPIO10_GPIO, /* GSM_IRQ */
+ GPIO13_GPIO, /* CPLD_IRQ */
+ GPIO107_GPIO, /* DS1WM_IRQ */
+ GPIO108_GPIO, /* GSM_READY */
+ GPIO58_GPIO, /* TSC2046_nPENIRQ */
+ GPIO66_GPIO, /* nSDIO_IRQ */
+};
+
+#define HX4700_GPIO_IN(num, _desc) \
+ { .gpio = (num), .dir = 0, .desc = (_desc) }
+#define HX4700_GPIO_OUT(num, _init, _desc) \
+ { .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
+struct gpio_ress {
+ unsigned gpio : 8;
+ unsigned dir : 1;
+ unsigned init : 1;
+ char *desc;
+};
+
+static int hx4700_gpio_request(struct gpio_ress *gpios, int size)
+{
+ int i, rc = 0;
+ int gpio;
+ int dir;
+
+ for (i = 0; (!rc) && (i < size); i++) {
+ gpio = gpios[i].gpio;
+ dir = gpios[i].dir;
+ rc = gpio_request(gpio, gpios[i].desc);
+ if (rc) {
+ pr_err("Error requesting GPIO %d(%s) : %d\n",
+ gpio, gpios[i].desc, rc);
+ continue;
+ }
+ if (dir)
+ gpio_direction_output(gpio, gpios[i].init);
+ else
+ gpio_direction_input(gpio);
+ }
+ while ((rc) && (--i >= 0))
+ gpio_free(gpios[i].gpio);
+ return rc;
+}
+
+/*
+ * IRDA
+ */
+
+static void irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO105_HX4700_nIR_ON, mode & IR_OFF);
+}
+
+static struct pxaficp_platform_data ficp_info = {
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = irda_transceiver_mode,
+};
+
+/*
+ * GPIO Keys
+ */
+
+#define INIT_KEY(_code, _gpio, _active_low, _desc) \
+ { \
+ .code = KEY_##_code, \
+ .gpio = _gpio, \
+ .active_low = _active_low, \
+ .desc = _desc, \
+ .type = EV_KEY, \
+ .wakeup = 1, \
+ }
+
+static struct gpio_keys_button gpio_keys_buttons[] = {
+ INIT_KEY(POWER, GPIO0_HX4700_nKEY_POWER, 1, "Power button"),
+ INIT_KEY(MAIL, GPIO94_HX4700_KEY_MAIL, 0, "Mail button"),
+ INIT_KEY(ADDRESSBOOK, GPIO99_HX4700_KEY_CONTACTS,0, "Contacts button"),
+ INIT_KEY(RECORD, GPIOD6_nKEY_RECORD, 1, "Record button"),
+ INIT_KEY(CALENDAR, GPIOD1_nKEY_CALENDAR, 1, "Calendar button"),
+ INIT_KEY(HOMEPAGE, GPIOD3_nKEY_HOME, 1, "Home button"),
+};
+
+static struct gpio_keys_platform_data gpio_keys_data = {
+ .buttons = gpio_keys_buttons,
+ .nbuttons = ARRAY_SIZE(gpio_keys_buttons),
+};
+
+static struct platform_device gpio_keys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &gpio_keys_data,
+ },
+ .id = -1,
+};
+
+/*
+ * ASIC3
+ */
+
+static u16 asic3_gpio_config[] = {
+ /* ASIC3 GPIO banks A and B along with some of C and D
+ implement the buffering for the CF slot. */
+ ASIC3_CONFIG_GPIO(0, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(1, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(2, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(3, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(4, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(5, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(6, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(7, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(8, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(9, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(10, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(11, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(12, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(13, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(14, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(15, 1, 1, 0),
+
+ ASIC3_CONFIG_GPIO(16, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(17, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(18, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(19, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(20, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(21, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(22, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(23, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(24, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(25, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(26, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(27, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(28, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(29, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(30, 1, 1, 0),
+ ASIC3_CONFIG_GPIO(31, 1, 1, 0),
+
+ /* GPIOC - CF, LEDs, SD */
+ ASIC3_GPIOC0_LED0, /* red */
+ ASIC3_GPIOC1_LED1, /* green */
+ ASIC3_GPIOC2_LED2, /* blue */
+ ASIC3_GPIOC4_CF_nCD,
+ ASIC3_GPIOC5_nCIOW,
+ ASIC3_GPIOC6_nCIOR,
+ ASIC3_GPIOC7_nPCE_1,
+ ASIC3_GPIOC8_nPCE_2,
+ ASIC3_GPIOC9_nPOE,
+ ASIC3_GPIOC10_nPWE,
+ ASIC3_GPIOC11_PSKTSEL,
+ ASIC3_GPIOC12_nPREG,
+ ASIC3_GPIOC13_nPWAIT,
+ ASIC3_GPIOC14_nPIOIS16,
+ ASIC3_GPIOC15_nPIOR,
+
+ /* GPIOD: input GPIOs, CF */
+ ASIC3_GPIOD11_nCIOIS16,
+ ASIC3_GPIOD12_nCWAIT,
+ ASIC3_GPIOD15_nPIOW,
+};
+
+static struct resource asic3_resources[] = {
+ /* GPIO part */
+ [0] = {
+ .start = ASIC3_PHYS,
+ .end = ASIC3_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+ .end = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+ .flags = IORESOURCE_IRQ,
+ },
+ /* SD part */
+ [2] = {
+ .start = ASIC3_SD_PHYS,
+ .end = ASIC3_SD_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = {
+ .start = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+ .end = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct asic3_platform_data asic3_platform_data = {
+ .gpio_config = asic3_gpio_config,
+ .gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
+ .irq_base = IRQ_BOARD_START,
+ .gpio_base = HX4700_ASIC3_GPIO_BASE,
+};
+
+static struct platform_device asic3 = {
+ .name = "asic3",
+ .id = -1,
+ .resource = asic3_resources,
+ .num_resources = ARRAY_SIZE(asic3_resources),
+ .dev = {
+ .platform_data = &asic3_platform_data,
+ },
+};
+
+/*
+ * EGPIO
+ */
+
+static struct resource egpio_resources[] = {
+ [0] = {
+ .start = PXA_CS5_PHYS,
+ .end = PXA_CS5_PHYS + 0x4 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct htc_egpio_chip egpio_chips[] = {
+ [0] = {
+ .reg_start = 0,
+ .gpio_base = HX4700_EGPIO_BASE,
+ .num_gpios = 8,
+ .direction = HTC_EGPIO_OUTPUT,
+ },
+};
+
+static struct htc_egpio_platform_data egpio_info = {
+ .reg_width = 16,
+ .bus_width = 16,
+ .chip = egpio_chips,
+ .num_chips = ARRAY_SIZE(egpio_chips),
+};
+
+static struct platform_device egpio = {
+ .name = "htc-egpio",
+ .id = -1,
+ .resource = egpio_resources,
+ .num_resources = ARRAY_SIZE(egpio_resources),
+ .dev = {
+ .platform_data = &egpio_info,
+ },
+};
+
+/*
+ * LCD - Sony display connected to ATI Imageon w3220
+ */
+
+static int lcd_power;
+
+static void sony_lcd_init(void)
+{
+ gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
+ gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+ gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
+ gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 0);
+ gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
+ mdelay(10);
+ gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
+ gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+ mdelay(20);
+
+ gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1);
+ mdelay(5);
+ gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1);
+
+ /* FIXME: init w3220 registers here */
+
+ mdelay(5);
+ gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 1);
+ mdelay(10);
+ gpio_set_value(GPIO62_HX4700_LCD_nRESET, 1);
+ mdelay(10);
+ gpio_set_value(GPIO59_HX4700_LCD_PC1, 1);
+ mdelay(10);
+ gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 1);
+}
+
+static void sony_lcd_off(void)
+{
+ gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
+ gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
+ mdelay(10);
+ gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 0);
+ mdelay(10);
+ gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
+ mdelay(10);
+ gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
+}
+
+static int hx4700_lcd_set_power(struct lcd_device *ldev, int level)
+{
+ switch (level) {
+ case FB_BLANK_UNBLANK:
+ sony_lcd_init();
+ break;
+ case FB_BLANK_NORMAL:
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_POWERDOWN:
+ sony_lcd_off();
+ break;
+ }
+ lcd_power = level;
+ return 0;
+}
+
+static int hx4700_lcd_get_power(struct lcd_device *lm)
+{
+ return lcd_power;
+}
+
+static struct lcd_ops hx4700_lcd_ops = {
+ .get_power = hx4700_lcd_get_power,
+ .set_power = hx4700_lcd_set_power,
+};
+
+static struct lcd_device *hx4700_lcd_device;
+
+#ifdef CONFIG_PM
+static void w3220_lcd_suspend(struct w100fb_par *wfb)
+{
+ sony_lcd_off();
+}
+
+static void w3220_lcd_resume(struct w100fb_par *wfb)
+{
+ sony_lcd_init();
+}
+#else
+#define w3220_lcd_resume NULL
+#define w3220_lcd_suspend NULL
+#endif
+
+static struct w100_tg_info w3220_tg_info = {
+ .suspend = w3220_lcd_suspend,
+ .resume = w3220_lcd_resume,
+};
+
+/* W3220_VGA QVGA */
+static struct w100_gen_regs w3220_regs = {
+ .lcd_format = 0x00000003,
+ .lcdd_cntl1 = 0x00000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00abf003, /* 0x00fff003 */
+ .genlcd_cntl2 = 0x00000003,
+ .genlcd_cntl3 = 0x000102aa,
+};
+
+static struct w100_mode w3220_modes[] = {
+{
+ .xres = 480,
+ .yres = 640,
+ .left_margin = 15,
+ .right_margin = 16,
+ .upper_margin = 8,
+ .lower_margin = 7,
+ .crtc_ss = 0x00000000,
+ .crtc_ls = 0xa1ff01f9, /* 0x21ff01f9 */
+ .crtc_gs = 0xc0000000, /* 0x40000000 */
+ .crtc_vpos_gs = 0x0000028f,
+ .crtc_ps1_active = 0x00000000, /* 0x41060010 */
+ .crtc_rev = 0,
+ .crtc_dclk = 0x80000000,
+ .crtc_gclk = 0x040a0104,
+ .crtc_goe = 0,
+ .pll_freq = 95,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+},
+{
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 9,
+ .right_margin = 8,
+ .upper_margin = 5,
+ .lower_margin = 4,
+ .crtc_ss = 0x80150014,
+ .crtc_ls = 0xa0fb00f7,
+ .crtc_gs = 0xc0080007,
+ .crtc_vpos_gs = 0x00080007,
+ .crtc_rev = 0x0000000a,
+ .crtc_dclk = 0x81700030,
+ .crtc_gclk = 0x8015010f,
+ .crtc_goe = 0x00000000,
+ .pll_freq = 95,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_PLL,
+ .sysclk_divider = 0,
+ .sysclk_src = CLK_SRC_PLL,
+},
+};
+
+struct w100_mem_info w3220_mem_info = {
+ .ext_cntl = 0x09640011,
+ .sdram_mode_reg = 0x00600021,
+ .ext_timing_cntl = 0x1a001545, /* 0x15001545 */
+ .io_cntl = 0x7ddd7333,
+ .size = 0x1fffff,
+};
+
+struct w100_bm_mem_info w3220_bm_mem_info = {
+ .ext_mem_bw = 0x50413e01,
+ .offset = 0,
+ .ext_timing_ctl = 0x00043f7f,
+ .ext_cntl = 0x00000010,
+ .mode_reg = 0x00250000,
+ .io_cntl = 0x0fff0000,
+ .config = 0x08301480,
+};
+
+static struct w100_gpio_regs w3220_gpio_info = {
+ .init_data1 = 0xdfe00100, /* GPIO_DATA */
+ .gpio_dir1 = 0xffff0000, /* GPIO_CNTL1 */
+ .gpio_oe1 = 0x00000000, /* GPIO_CNTL2 */
+ .init_data2 = 0x00000000, /* GPIO_DATA2 */
+ .gpio_dir2 = 0x00000000, /* GPIO_CNTL3 */
+ .gpio_oe2 = 0x00000000, /* GPIO_CNTL4 */
+};
+
+static struct w100fb_mach_info w3220_info = {
+ .tg = &w3220_tg_info,
+ .mem = &w3220_mem_info,
+ .bm_mem = &w3220_bm_mem_info,
+ .gpio = &w3220_gpio_info,
+ .regs = &w3220_regs,
+ .modelist = w3220_modes,
+ .num_modes = 2,
+ .xtal_freq = 16000000,
+};
+
+static struct resource w3220_resources[] = {
+ [0] = {
+ .start = ATI_W3220_PHYS,
+ .end = ATI_W3220_PHYS + 0x00ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device w3220 = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &w3220_info,
+ },
+ .num_resources = ARRAY_SIZE(w3220_resources),
+ .resource = w3220_resources,
+};
+
+/*
+ * Backlight
+ */
+
+static struct platform_pwm_backlight_data backlight_data = {
+ .pwm_id = 1,
+ .max_brightness = 200,
+ .dft_brightness = 100,
+ .pwm_period_ns = 30923,
+};
+
+static struct platform_device backlight = {
+ .name = "pwm-backlight",
+ .id = -1,
+ .dev = {
+ .parent = &pxa27x_device_pwm1.dev,
+ .platform_data = &backlight_data,
+ },
+};
+
+/*
+ * USB "Transceiver"
+ */
+
+static struct gpio_vbus_mach_info gpio_vbus_info = {
+ .gpio_pullup = GPIO76_HX4700_USBC_PUEN,
+ .gpio_vbus = GPIOD14_nUSBC_DETECT,
+ .gpio_vbus_inverted = 1,
+};
+
+static struct platform_device gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_vbus_info,
+ },
+};
+
+/*
+ * Touchscreen - TSC2046 connected to SSP2
+ */
+
+static const struct ads7846_platform_data tsc2046_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100,
+ .pressure_max = 512,
+ .debounce_max = 10,
+ .debounce_tol = 3,
+ .debounce_rep = 1,
+ .gpio_pendown = GPIO58_HX4700_TSC2046_nPENIRQ,
+};
+
+static struct pxa2xx_spi_chip tsc2046_chip = {
+ .tx_threshold = 1,
+ .rx_threshold = 2,
+ .timeout = 64,
+ .gpio_cs = GPIO88_HX4700_TSC2046_CS,
+};
+
+static struct spi_board_info tsc2046_board_info[] __initdata = {
+ {
+ .modalias = "ads7846",
+ .bus_num = 2,
+ .max_speed_hz = 2600000, /* 100 kHz sample rate */
+ .irq = gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ),
+ .platform_data = &tsc2046_info,
+ .controller_data = &tsc2046_chip,
+ },
+};
+
+static struct pxa2xx_spi_master pxa_ssp2_master_info = {
+ .num_chipselect = 1,
+ .clock_enable = CKEN_SSP2,
+ .enable_dma = 1,
+};
+
+/*
+ * External power
+ */
+
+static int power_supply_init(struct device *dev)
+{
+ return gpio_request(GPIOD9_nAC_IN, "AC charger detect");
+}
+
+static int hx4700_is_ac_online(void)
+{
+ return !gpio_get_value(GPIOD9_nAC_IN);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIOD9_nAC_IN);
+}
+
+static char *hx4700_supplicants[] = {
+ "ds2760-battery.0", "backup-battery"
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = hx4700_is_ac_online,
+ .exit = power_supply_exit,
+ .supplied_to = hx4700_supplicants,
+ .num_supplicants = ARRAY_SIZE(hx4700_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+ [0] = {
+ .name = "ac",
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ .start = gpio_to_irq(GPIOD9_nAC_IN),
+ .end = gpio_to_irq(GPIOD9_nAC_IN),
+ },
+ [1] = {
+ .name = "usb",
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ .start = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+ .end = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+ },
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+ .resource = power_supply_resources,
+ .num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+/*
+ * Battery charger
+ */
+
+static struct regulator_consumer_supply bq24022_consumers[] = {
+ {
+ .dev = &gpio_vbus.dev,
+ .supply = "vbus_draw",
+ },
+ {
+ .dev = &power_supply.dev,
+ .supply = "ac_draw",
+ },
+};
+
+static struct regulator_init_data bq24022_init_data = {
+ .constraints = {
+ .max_uA = 500000,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
+ .consumer_supplies = bq24022_consumers,
+};
+
+static struct bq24022_mach_info bq24022_info = {
+ .gpio_nce = GPIO72_HX4700_BQ24022_nCHARGE_EN,
+ .gpio_iset2 = GPIO96_HX4700_BQ24022_ISET2,
+ .init_data = &bq24022_init_data,
+};
+
+static struct platform_device bq24022 = {
+ .name = "bq24022",
+ .id = -1,
+ .dev = {
+ .platform_data = &bq24022_info,
+ },
+};
+
+/*
+ * StrataFlash
+ */
+
+static void hx4700_set_vpp(struct map_info *map, int vpp)
+{
+ gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
+}
+
+static struct resource strataflash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_128M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data strataflash_data = {
+ .width = 4,
+ .set_vpp = hx4700_set_vpp,
+};
+
+static struct platform_device strataflash = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &strataflash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &strataflash_data,
+ },
+};
+
+/*
+ * PCMCIA
+ */
+
+static struct platform_device pcmcia = {
+ .name = "hx4700-pcmcia",
+ .dev = {
+ .parent = &asic3.dev,
+ },
+};
+
+/*
+ * Platform devices
+ */
+
+static struct platform_device *devices[] __initdata = {
+ &asic3,
+ &gpio_keys,
+ &backlight,
+ &w3220,
+ &egpio,
+ &bq24022,
+ &gpio_vbus,
+ &power_supply,
+ &strataflash,
+ &pcmcia,
+};
+
+static struct gpio_ress global_gpios[] = {
+ HX4700_GPIO_IN(GPIO12_HX4700_ASIC3_IRQ, "ASIC3_IRQ"),
+ HX4700_GPIO_IN(GPIO13_HX4700_W3220_IRQ, "W3220_IRQ"),
+ HX4700_GPIO_IN(GPIO14_HX4700_nWLAN_IRQ, "WLAN_IRQ"),
+ HX4700_GPIO_OUT(GPIO59_HX4700_LCD_PC1, 1, "LCD_PC1"),
+ HX4700_GPIO_OUT(GPIO62_HX4700_LCD_nRESET, 1, "LCD_RESET"),
+ HX4700_GPIO_OUT(GPIO70_HX4700_LCD_SLIN1, 1, "LCD_SLIN1"),
+ HX4700_GPIO_OUT(GPIO84_HX4700_LCD_SQN, 1, "LCD_SQN"),
+ HX4700_GPIO_OUT(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1, "LCD_LVDD"),
+ HX4700_GPIO_OUT(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1, "LCD_AVDD"),
+ HX4700_GPIO_OUT(GPIO32_HX4700_RS232_ON, 1, "RS232_ON"),
+ HX4700_GPIO_OUT(GPIO71_HX4700_ASIC3_nRESET, 1, "ASIC3_nRESET"),
+ HX4700_GPIO_OUT(GPIO82_HX4700_EUART_RESET, 1, "EUART_RESET"),
+ HX4700_GPIO_OUT(GPIO105_HX4700_nIR_ON, 1, "nIR_EN"),
+};
+
+static void __init hx4700_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
+ hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios));
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ pxa_set_ficp_info(&ficp_info);
+ pxa27x_set_i2c_power_info(NULL);
+ pxa_set_i2c_info(NULL);
+ pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
+ spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
+
+ hx4700_lcd_device = lcd_device_register("w100fb", NULL,
+ (void *)&w3220_info, &hx4700_lcd_ops);
+
+ gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
+ mdelay(10);
+ gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
+ mdelay(10);
+}
+
+MACHINE_START(H4700, "HP iPAQ HX4700")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .init_machine = hx4700_init,
+ .timer = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 2b27336..961807d 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -22,6 +22,7 @@
#include <linux/spi/spi.h>
#include <linux/i2c.h>
#include <linux/mfd/da903x.h>
+#include <linux/sht15.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -29,7 +30,7 @@
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/udc.h>
#include <mach/mmc.h>
#include <mach/pxa2xx_spi.h>
@@ -102,6 +103,10 @@ static unsigned long imote2_pin_config[] __initdata = {
GPIO96_GPIO, /* accelerometer interrupt */
GPIO99_GPIO, /* ADC interrupt */
+ /* SHT15 */
+ GPIO100_GPIO,
+ GPIO98_GPIO,
+
/* Connector pins specified as gpios */
GPIO94_GPIO, /* large basic connector pin 14 */
GPIO10_GPIO, /* large basic connector pin 23 */
@@ -112,6 +117,26 @@ static unsigned long imote2_pin_config[] __initdata = {
GPIO105_GPIO, /* blue led */
};
+static struct sht15_platform_data platform_data_sht15 = {
+ .gpio_data = 100,
+ .gpio_sck = 98,
+};
+
+static struct platform_device sht15 = {
+ .name = "sht15",
+ .id = -1,
+ .dev = {
+ .platform_data = &platform_data_sht15,
+ },
+};
+
+static struct regulator_consumer_supply imote2_sensor_3_con[] = {
+ {
+ .dev = &sht15.dev,
+ .supply = "vcc",
+ },
+};
+
static struct gpio_led imote2_led_pins[] = {
{
.name = "imote2:red",
@@ -257,6 +282,8 @@ static struct regulator_init_data imote2_ldo_init_data[] = {
.min_uV = 2800000,
.max_uV = 3000000,
},
+ .num_consumer_supplies = ARRAY_SIZE(imote2_sensor_3_con),
+ .consumer_supplies = imote2_sensor_3_con,
},
[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
.constraints = {
@@ -432,6 +459,9 @@ static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
.type = "tmp175",
.addr = 0x4A,
.irq = IRQ_GPIO(96),
+ }, { /* IMB400 Multimedia board */
+ .type = "wm8940",
+ .addr = 0x1A,
},
};
@@ -456,25 +486,12 @@ static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
.num_chipselect = 1,
};
-/* Patch posted by Eric Miao <eric.miao@marvell.com> will remove
- * the need for these functions.
- */
-static void spi1control(u32 command)
-{
- gpio_set_value(24, command & PXA2XX_CS_ASSERT ? 0 : 1);
-};
-
-static void spi3control(u32 command)
-{
- gpio_set_value(39, command & PXA2XX_CS_ASSERT ? 0 : 1);
-};
-
static struct pxa2xx_spi_chip staccel_chip_info = {
.tx_threshold = 8,
.rx_threshold = 8,
.dma_burst_size = 8,
.timeout = 235,
- .cs_control = spi1control,
+ .gpio_cs = 24,
};
static struct pxa2xx_spi_chip cc2420_info = {
@@ -482,7 +499,7 @@ static struct pxa2xx_spi_chip cc2420_info = {
.rx_threshold = 8,
.dma_burst_size = 8,
.timeout = 235,
- .cs_control = spi3control,
+ .gpio_cs = 39,
};
static struct spi_board_info spi_board_info[] __initdata = {
@@ -521,6 +538,7 @@ static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
static struct platform_device *imote2_devices[] = {
&imote2_flash_device,
&imote2_leds,
+ &sht15,
};
static struct i2c_pxa_platform_data i2c_pwr_pdata = {
@@ -538,8 +556,6 @@ static void __init imote2_init(void)
/* SPI chip select directions - all other directions should
* be handled by drivers.*/
gpio_direction_output(37, 0);
- gpio_direction_output(24, 0);
- gpio_direction_output(39, 0);
platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
new file mode 100644
index 0000000..9eaeed1
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -0,0 +1,131 @@
+/*
+ * GPIO and IRQ definitions for HP iPAQ hx4700
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _HX4700_H_
+#define _HX4700_H_
+
+#include <linux/gpio.h>
+#include <linux/mfd/asic3.h>
+
+#define HX4700_ASIC3_GPIO_BASE NR_BUILTIN_GPIO
+#define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
+
+/*
+ * PXA GPIOs
+ */
+
+#define GPIO0_HX4700_nKEY_POWER 0
+#define GPIO12_HX4700_ASIC3_IRQ 12
+#define GPIO13_HX4700_W3220_IRQ 13
+#define GPIO14_HX4700_nWLAN_IRQ 14
+#define GPIO18_HX4700_RDY 18
+#define GPIO22_HX4700_LCD_RL 22
+#define GPIO27_HX4700_CODEC_ON 27
+#define GPIO32_HX4700_RS232_ON 32
+#define GPIO52_HX4700_CPU_nBATT_FAULT 52
+#define GPIO58_HX4700_TSC2046_nPENIRQ 58
+#define GPIO59_HX4700_LCD_PC1 59
+#define GPIO60_HX4700_CF_RNB 60
+#define GPIO61_HX4700_W3220_nRESET 61
+#define GPIO62_HX4700_LCD_nRESET 62
+#define GPIO63_HX4700_CPU_SS_nRESET 63
+#define GPIO65_HX4700_TSC2046_PEN_PU 65
+#define GPIO66_HX4700_ASIC3_nSDIO_IRQ 66
+#define GPIO67_HX4700_EUART_PS 67
+#define GPIO70_HX4700_LCD_SLIN1 70
+#define GPIO71_HX4700_ASIC3_nRESET 71
+#define GPIO72_HX4700_BQ24022_nCHARGE_EN 72
+#define GPIO73_HX4700_LCD_UD_1 73
+#define GPIO75_HX4700_EARPHONE_nDET 75
+#define GPIO76_HX4700_USBC_PUEN 76
+#define GPIO81_HX4700_CPU_GP_nRESET 81
+#define GPIO82_HX4700_EUART_RESET 82
+#define GPIO83_HX4700_WLAN_nRESET 83
+#define GPIO84_HX4700_LCD_SQN 84
+#define GPIO85_HX4700_nPCE1 85
+#define GPIO88_HX4700_TSC2046_CS 88
+#define GPIO91_HX4700_FLASH_VPEN 91
+#define GPIO92_HX4700_HP_DRIVER 92
+#define GPIO93_HX4700_EUART_INT 93
+#define GPIO94_HX4700_KEY_MAIL 94
+#define GPIO95_HX4700_BATT_OFF 95
+#define GPIO96_HX4700_BQ24022_ISET2 96
+#define GPIO97_HX4700_nBL_DETECT 97
+#define GPIO99_HX4700_KEY_CONTACTS 99
+#define GPIO100_HX4700_AUTO_SENSE 100 /* BL auto brightness */
+#define GPIO102_HX4700_SYNAPTICS_POWER_ON 102
+#define GPIO103_HX4700_SYNAPTICS_INT 103
+#define GPIO105_HX4700_nIR_ON 105
+#define GPIO106_HX4700_CPU_BT_nRESET 106
+#define GPIO107_HX4700_SPK_nSD 107
+#define GPIO109_HX4700_CODEC_nPDN 109
+#define GPIO110_HX4700_LCD_LVDD_3V3_ON 110
+#define GPIO111_HX4700_LCD_AVDD_3V3_ON 111
+#define GPIO112_HX4700_LCD_N2V7_7V3_ON 112
+#define GPIO114_HX4700_CF_RESET 114
+#define GPIO116_HX4700_CPU_HW_nRESET 116
+
+/*
+ * ASIC3 GPIOs
+ */
+
+#define GPIOC_BASE (HX4700_ASIC3_GPIO_BASE + 32)
+#define GPIOD_BASE (HX4700_ASIC3_GPIO_BASE + 48)
+
+#define GPIOC0_LED_RED (GPIOC_BASE + 0)
+#define GPIOC1_LED_GREEN (GPIOC_BASE + 1)
+#define GPIOC2_LED_BLUE (GPIOC_BASE + 2)
+#define GPIOC3_nSD_CS (GPIOC_BASE + 3)
+#define GPIOC4_CF_nCD (GPIOC_BASE + 4) /* Input */
+#define GPIOC5_nCIOW (GPIOC_BASE + 5) /* Output, to CF */
+#define GPIOC6_nCIOR (GPIOC_BASE + 6) /* Output, to CF */
+#define GPIOC7_nPCE1 (GPIOC_BASE + 7) /* Input, from CPU */
+#define GPIOC8_nPCE2 (GPIOC_BASE + 8) /* Input, from CPU */
+#define GPIOC9_nPOE (GPIOC_BASE + 9) /* Input, from CPU */
+#define GPIOC10_CF_nPWE (GPIOC_BASE + 10) /* Input */
+#define GPIOC11_PSKTSEL (GPIOC_BASE + 11) /* Input, from CPU */
+#define GPIOC12_nPREG (GPIOC_BASE + 12) /* Input, from CPU */
+#define GPIOC13_nPWAIT (GPIOC_BASE + 13) /* Output, to CPU */
+#define GPIOC14_nPIOIS16 (GPIOC_BASE + 14) /* Output, to CPU */
+#define GPIOC15_nPIOR (GPIOC_BASE + 15) /* Input, from CPU */
+
+#define GPIOD0_CPU_SS_INT (GPIOD_BASE + 0) /* Input */
+#define GPIOD1_nKEY_CALENDAR (GPIOD_BASE + 1)
+#define GPIOD2_BLUETOOTH_WAKEUP (GPIOD_BASE + 2)
+#define GPIOD3_nKEY_HOME (GPIOD_BASE + 3)
+#define GPIOD4_CF_nCD (GPIOD_BASE + 4) /* Input, from CF */
+#define GPIOD5_nPIO (GPIOD_BASE + 5) /* Input */
+#define GPIOD6_nKEY_RECORD (GPIOD_BASE + 6)
+#define GPIOD7_nSDIO_DETECT (GPIOD_BASE + 7)
+#define GPIOD8_COM_DCD (GPIOD_BASE + 8) /* Input */
+#define GPIOD9_nAC_IN (GPIOD_BASE + 9)
+#define GPIOD10_nSDIO_IRQ (GPIOD_BASE + 10) /* Input */
+#define GPIOD11_nCIOIS16 (GPIOD_BASE + 11) /* Input, from CF */
+#define GPIOD12_nCWAIT (GPIOD_BASE + 12) /* Input, from CF */
+#define GPIOD13_CF_RNB (GPIOD_BASE + 13) /* Input */
+#define GPIOD14_nUSBC_DETECT (GPIOD_BASE + 14)
+#define GPIOD15_nPIOW (GPIOD_BASE + 15) /* Input, from CPU */
+
+/*
+ * EGPIOs
+ */
+
+#define EGPIO0_VCC_3V3_EN (HX4700_EGPIO_BASE + 0) /* WLAN support chip */
+#define EGPIO1_WL_VREG_EN (HX4700_EGPIO_BASE + 1) /* WLAN power */
+#define EGPIO2_VCC_2V1_WL_EN (HX4700_EGPIO_BASE + 2) /* unused */
+#define EGPIO3_SS_PWR_ON (HX4700_EGPIO_BASE + 3) /* smart slot power */
+#define EGPIO4_CF_3V3_ON (HX4700_EGPIO_BASE + 4) /* CF 3.3V enable */
+#define EGPIO5_BT_3V3_ON (HX4700_EGPIO_BASE + 5) /* BT 3.3V enable */
+#define EGPIO6_WL1V8_EN (HX4700_EGPIO_BASE + 6) /* WLAN 1.8V enable */
+#define EGPIO7_VCC_3V3_WL_EN (HX4700_EGPIO_BASE + 7) /* WLAN 3.3V enable */
+#define EGPIO8_USB_3V3_ON (HX4700_EGPIO_BASE + 8) /* unused */
+
+#endif /* _HX4700_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 32bb4a2..6a1d959 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -91,13 +91,23 @@
#define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
/*
- * The next 16 interrupts are for board specific purposes. Since
+ * The following interrupts are for board specific purposes. Since
* the kernel can only run on one machine at a time, we can re-use
- * these. If you need more, increase IRQ_BOARD_END, but keep it
- * within sensible limits.
+ * these. There will be 16 IRQs by default. If it is not enough,
+ * IRQ_BOARD_END is allowed be customized for each board, but keep
+ * the numbers within sensible limits and in descending order, so
+ * when multiple config options are selected, the maximum will be
+ * used.
*/
#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+
+#if defined(CONFIG_MACH_H4700)
+#define IRQ_BOARD_END (IRQ_BOARD_START + 70)
+#elif defined(CONFIG_MACH_ZYLONITE)
+#define IRQ_BOARD_END (IRQ_BOARD_START + 32)
+#else
#define IRQ_BOARD_END (IRQ_BOARD_START + 16)
+#endif
#define IRQ_SA1111_START (IRQ_BOARD_END)
#define IRQ_GPAIN0 (IRQ_BOARD_END + 0)
@@ -188,8 +198,6 @@
#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
#define NR_IRQS (IRQ_BOARD_END)
-#elif defined(CONFIG_MACH_ZYLONITE)
-#define NR_IRQS (IRQ_BOARD_START + 32)
#else
#define NR_IRQS (IRQ_BOARD_START)
#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 07897e6..3ce4682 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -283,6 +283,9 @@
#define GPIO41_UART1_TXD MFP_CFG_LPM(GPIO41, AF4, FLOAT)
#define GPIO42_UART1_RXD MFP_CFG_LPM(GPIO42, AF4, FLOAT)
#define GPIO42_UART1_TXD MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO75_UART1_RXD MFP_CFG_LPM(GPIO75, AF1, FLOAT)
+#define GPIO76_UART1_RXD MFP_CFG_LPM(GPIO76, AF3, FLOAT)
+#define GPIO76_UART1_TXD MFP_CFG_LPM(GPIO76, AF1, FLOAT)
#define GPIO97_UART1_RXD MFP_CFG_LPM(GPIO97, AF1, FLOAT)
#define GPIO97_UART1_TXD MFP_CFG_LPM(GPIO97, AF6, FLOAT)
#define GPIO98_UART1_RXD MFP_CFG_LPM(GPIO98, AF6, FLOAT)
@@ -291,6 +294,9 @@
#define GPIO43_UART1_RTS MFP_CFG_LPM(GPIO43, AF4, FLOAT)
#define GPIO48_UART1_CTS MFP_CFG_LPM(GPIO48, AF4, FLOAT)
#define GPIO48_UART1_RTS MFP_CFG_LPM(GPIO48, AF2, FLOAT)
+#define GPIO77_UART1_CTS MFP_CFG_LPM(GPIO77, AF1, FLOAT)
+#define GPIO82_UART1_RTS MFP_CFG_LPM(GPIO82, AF1, FLOAT)
+#define GPIO82_UART1_CTS MFP_CFG_LPM(GPIO82, AF3, FLOAT)
#define GPIO99_UART1_CTS MFP_CFG_LPM(GPIO99, AF1, FLOAT)
#define GPIO99_UART1_RTS MFP_CFG_LPM(GPIO99, AF6, FLOAT)
#define GPIO104_UART1_CTS MFP_CFG_LPM(GPIO104, AF6, FLOAT)
@@ -299,13 +305,18 @@
#define GPIO45_UART1_DSR MFP_CFG_LPM(GPIO45, AF2, FLOAT)
#define GPIO47_UART1_DTR MFP_CFG_LPM(GPIO47, AF2, FLOAT)
#define GPIO47_UART1_DSR MFP_CFG_LPM(GPIO47, AF4, FLOAT)
+#define GPIO79_UART1_DSR MFP_CFG_LPM(GPIO79, AF1, FLOAT)
+#define GPIO81_UART1_DTR MFP_CFG_LPM(GPIO81, AF1, FLOAT)
+#define GPIO81_UART1_DSR MFP_CFG_LPM(GPIO81, AF3, FLOAT)
#define GPIO101_UART1_DTR MFP_CFG_LPM(GPIO101, AF6, FLOAT)
#define GPIO101_UART1_DSR MFP_CFG_LPM(GPIO101, AF1, FLOAT)
#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF1, FLOAT)
#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF6, FLOAT)
#define GPIO44_UART1_DCD MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO78_UART1_DCD MFP_CFG_LPM(GPIO78, AF1, FLOAT)
#define GPIO100_UART1_DCD MFP_CFG_LPM(GPIO100, AF1, FLOAT)
#define GPIO46_UART1_RI MFP_CFG_LPM(GPIO46, AF2, FLOAT)
+#define GPIO80_UART1_RI MFP_CFG_LPM(GPIO80, AF1, FLOAT)
#define GPIO102_UART1_RI MFP_CFG_LPM(GPIO102, AF1, FLOAT)
/* UART2 */
@@ -438,6 +449,9 @@
#define GPIO2_RDY MFP_CFG(GPIO2, AF1)
#define GPIO5_NPIOR MFP_CFG(GPIO5, AF3)
+#define GPIO6_NPIOW MFP_CFG(GPIO6, AF3)
+#define GPIO7_NPIOS16 MFP_CFG(GPIO7, AF3)
+#define GPIO8_NPWAIT MFP_CFG(GPIO8, AF3)
#define GPIO11_PWM0_OUT MFP_CFG(GPIO11, AF1)
#define GPIO12_PWM1_OUT MFP_CFG(GPIO12, AF1)
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index fb13c82..8721b80 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -56,7 +56,6 @@
#define GPIO_NR_PALMLD_LED_AMBER 94
/* IDE */
-#define GPIO_NR_PALMLD_IDE_IRQ 95
#define GPIO_NR_PALMLD_IDE_RESET 98
#define GPIO_NR_PALMLD_IDE_PWEN 115
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index a6eeef8..fd8360c 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -27,6 +27,8 @@ extern void pxa27x_cpu_suspend(unsigned int);
extern void pxa_cpu_resume(void);
extern int pxa_pm_enter(suspend_state_t state);
+extern int pxa_pm_prepare(void);
+extern void pxa_pm_finish(void);
/* NOTE: this is for PM debugging on Lubbock, it's really a big
* ugly, but let's keep the crap minimum here, instead of direct
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h
index 6876e16..0b70269 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x.h
@@ -16,4 +16,7 @@
#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
+
+extern int __init pxa27x_set_pwrmode(unsigned int mode);
+
#endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/include/asm/hardware/sharpsl_pm.h b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
index 2d00db2..1920dc6b 100644
--- a/arch/arm/include/asm/hardware/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
@@ -8,8 +8,8 @@
* published by the Free Software Foundation.
*
*/
-
-#include <linux/interrupt.h>
+#ifndef _MACH_SHARPSL_PM
+#define _MACH_SHARPSL_PM
struct sharpsl_charger_machinfo {
void (*init)(void);
@@ -100,7 +100,5 @@ extern struct sharpsl_pm_status sharpsl_pm;
void sharpsl_battery_kick(void);
void sharpsl_pm_led(int val);
-irqreturn_t sharpsl_ac_isr(int irq, void *dev_id);
-irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id);
-irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id);
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 5706cea..b547494 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -36,7 +36,8 @@ static inline void flush(void)
static inline void arch_decomp_setup(void)
{
if (machine_is_littleton() || machine_is_intelmote2()
- || machine_is_csb726())
+ || machine_is_csb726() || machine_is_stargate2()
+ || machine_is_cm_x300())
UART = STUART;
}
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index c872b9f..55b3788 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -42,14 +42,17 @@
#include <mach/pxa300.h>
#include <mach/pxafb.h>
#include <mach/ssp.h>
+#include <mach/mmc.h>
#include <mach/pxa2xx_spi.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxa3xx_nand.h>
#include <mach/littleton.h>
#include "generic.h"
+#define GPIO_MMC1_CARD_DETECT mfp_to_gpio(MFP_PIN_GPIO15)
+
/* Littleton MFP configurations */
static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
/* LCD */
@@ -98,6 +101,15 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
GPIO123_KP_MKOUT_2,
GPIO124_KP_MKOUT_3,
GPIO125_KP_MKOUT_4,
+
+ /* MMC1 */
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO7_MMC1_CLK,
+ GPIO8_MMC1_CMD,
+ GPIO15_GPIO, /* card detect */
};
static struct resource smc91x_resources[] = {
@@ -179,15 +191,10 @@ static struct pxa2xx_spi_master littleton_spi_info = {
.num_chipselect = 1,
};
-static void littleton_tdo24m_cs(u32 cmd)
-{
- gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
-}
-
static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
.rx_threshold = 1,
.tx_threshold = 1,
- .cs_control = littleton_tdo24m_cs,
+ .gpio_cs = LITTLETON_GPIO_LCD_CS,
};
static struct spi_board_info littleton_spi_devices[] __initdata = {
@@ -202,16 +209,6 @@ static struct spi_board_info littleton_spi_devices[] __initdata = {
static void __init littleton_init_spi(void)
{
- int err;
-
- err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
- if (err) {
- pr_warning("failed to request GPIO for LCS CS\n");
- return;
- }
-
- gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
-
pxa2xx_set_spi_info(2, &littleton_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
}
@@ -267,6 +264,56 @@ static void __init littleton_init_keypad(void)
static inline void littleton_init_keypad(void) {}
#endif
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static int littleton_mci_init(struct device *dev,
+ irq_handler_t littleton_detect_int, void *data)
+{
+ int err, gpio_cd = GPIO_MMC1_CARD_DETECT;
+
+ err = gpio_request(gpio_cd, "mmc card detect");
+ if (err)
+ goto err_request_cd;
+
+ gpio_direction_input(gpio_cd);
+
+ err = request_irq(gpio_to_irq(gpio_cd), littleton_detect_int,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "mmc card detect", data);
+ if (err) {
+ dev_err(dev, "failed to request card detect IRQ\n");
+ goto err_request_irq;
+ }
+ return 0;
+
+err_request_irq:
+ gpio_free(gpio_cd);
+err_request_cd:
+ return err;
+}
+
+static void littleton_mci_exit(struct device *dev, void *data)
+{
+ int gpio_cd = GPIO_MMC1_CARD_DETECT;
+
+ free_irq(gpio_to_irq(gpio_cd), data);
+ gpio_free(gpio_cd);
+}
+
+static struct pxamci_platform_data littleton_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .init = littleton_mci_init,
+ .exit = littleton_mci_exit,
+};
+
+static void __init littleton_init_mmc(void)
+{
+ pxa_set_mci_info(&littleton_mci_platform_data);
+}
+#else
+static inline void littleton_init_mmc(void) {}
+#endif
+
#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
static struct mtd_partition littleton_nand_partitions[] = {
[0] = {
@@ -407,6 +454,7 @@ static void __init littleton_init(void)
littleton_init_spi();
littleton_init_i2c();
+ littleton_init_mmc();
littleton_init_lcd();
littleton_init_keypad();
littleton_init_nand();
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index c899bbd..ca39669 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -36,7 +36,7 @@
#include <mach/pxa27x.h>
#include <mach/magician.h>
#include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
@@ -745,6 +745,14 @@ static struct platform_device strataflash = {
};
/*
+ * I2C
+ */
+
+static struct i2c_pxa_platform_data i2c_info = {
+ .fast_mode = 1,
+};
+
+/*
* Platform devices
*/
@@ -771,7 +779,7 @@ static void __init magician_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ platform_add_devices(ARRAY_AND_SIZE(devices));
err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN");
if (!err) {
@@ -779,7 +787,7 @@ static void __init magician_init(void)
pxa_set_ficp_info(&magician_ficp_info);
}
pxa27x_set_i2c_power_info(NULL);
- pxa_set_i2c_info(NULL);
+ pxa_set_i2c_info(&i2c_info);
pxa_set_mci_info(&magician_mci_info);
pxa_set_ohci_info(&magician_ohci_info);
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index a6c8429..f4dabf0 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -46,7 +46,7 @@
#include <mach/mainstone.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index ff8052c..4dc8c2e 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -48,7 +48,7 @@
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/camera.h>
#include <mach/audio.h>
#include <media/soc_camera.h>
@@ -798,7 +798,7 @@ static void mioa701_restart(char c, const char *cmd)
arm_machine_restart('s', cmd);
}
-struct gpio_ress global_gpios[] = {
+static struct gpio_ress global_gpios[] = {
MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 471a853..ed70f28 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -129,7 +129,7 @@ static unsigned long palmld_pin_config[] __initdata = {
GPIO81_GPIO, /* wifi reset */
/* HDD */
- GPIO95_GPIO, /* HDD irq */
+ GPIO98_GPIO, /* HDD reset */
GPIO115_GPIO, /* HDD power */
/* MISC */
@@ -496,6 +496,14 @@ static struct platform_device palmld_asoc = {
};
/******************************************************************************
+ * HDD
+ ******************************************************************************/
+static struct platform_device palmld_hdd = {
+ .name = "pata_palmld",
+ .id = -1,
+};
+
+/******************************************************************************
* Framebuffer
******************************************************************************/
static struct pxafb_mode_info palmld_lcd_modes[] = {
@@ -524,30 +532,18 @@ static struct pxafb_mach_info palmld_lcd_screen = {
/******************************************************************************
* Power management - standby
******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
- 0xe3a00101, /* mov r0, #0x40000000 */
- 0xe380060f, /* orr r0, r0, #0x00f00000 */
- 0xe590f008, /* ldr pc, [r0, #0x08] */
-};
-
-static int __init palmld_pm_init(void)
+static void __init palmld_pm_init(void)
{
- int i;
-
- /* this is where the bootloader jumps */
- addr = phys_to_virt(PALMLD_STR_BASE);
-
- for (i = 0; i < 3; i++)
- addr[i] = resume[i];
-
- return 0;
+ static u32 resume[] = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+ };
+
+ /* copy the bootloader */
+ memcpy(phys_to_virt(PALMLD_STR_BASE), resume, sizeof(resume));
}
-device_initcall(palmld_pm_init);
-#endif
-
/******************************************************************************
* Machine init
******************************************************************************/
@@ -559,6 +555,7 @@ static struct platform_device *devices[] __initdata = {
&palmld_leds,
&power_supply,
&palmld_asoc,
+ &palmld_hdd,
};
static struct map_desc palmld_io_desc[] __initdata = {
@@ -586,6 +583,7 @@ static void __init palmld_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
+ palmld_pm_init();
set_pxa_fb_info(&palmld_lcd_screen);
pxa_set_mci_info(&palmld_mci_platform_data);
pxa_set_ac97_info(&palmld_ac97_pdata);
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 05bf979..aae64a1 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -26,6 +26,7 @@
#include <linux/gpio.h>
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -343,11 +344,18 @@ static struct pxaficp_platform_data palmt5_ficp_platform_data = {
/******************************************************************************
* UDC
******************************************************************************/
-static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmt5_udc_info = {
.gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N,
.gpio_vbus_inverted = 1,
.gpio_pullup = GPIO_NR_PALMT5_USB_PULLUP,
- .gpio_pullup_inverted = 0,
+};
+
+static struct platform_device palmt5_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmt5_udc_info,
+ },
};
/******************************************************************************
@@ -466,30 +474,18 @@ static struct pxafb_mach_info palmt5_lcd_screen = {
/******************************************************************************
* Power management - standby
******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
- 0xe3a00101, /* mov r0, #0x40000000 */
- 0xe380060f, /* orr r0, r0, #0x00f00000 */
- 0xe590f008, /* ldr pc, [r0, #0x08] */
-};
-
-static int __init palmt5_pm_init(void)
+static void __init palmt5_pm_init(void)
{
- int i;
-
- /* this is where the bootloader jumps */
- addr = phys_to_virt(PALMT5_STR_BASE);
-
- for (i = 0; i < 3; i++)
- addr[i] = resume[i];
-
- return 0;
+ static u32 resume[] = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+ };
+
+ /* copy the bootloader */
+ memcpy(phys_to_virt(PALMT5_STR_BASE), resume, sizeof(resume));
}
-device_initcall(palmt5_pm_init);
-#endif
-
/******************************************************************************
* Machine init
******************************************************************************/
@@ -500,6 +496,7 @@ static struct platform_device *devices[] __initdata = {
&palmt5_backlight,
&power_supply,
&palmt5_asoc,
+ &palmt5_gpio_vbus,
};
/* setup udc GPIOs initial state */
@@ -515,14 +512,15 @@ static void __init palmt5_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
+ palmt5_pm_init();
set_pxa_fb_info(&palmt5_lcd_screen);
pxa_set_mci_info(&palmt5_mci_platform_data);
palmt5_udc_init();
pxa_set_ac97_info(&palmt5_ac97_pdata);
- pxa_set_udc_info(&palmt5_udc_info);
pxa_set_ficp_info(&palmt5_ficp_platform_data);
pxa_set_keypad_info(&palmt5_keypad_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 43fcf2e..d823b09 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -25,6 +25,7 @@
#include <linux/gpio.h>
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -37,6 +38,7 @@
#include <mach/mfp-pxa25x.h>
#include <mach/irda.h>
#include <mach/udc.h>
+#include <mach/palmasoc.h>
#include "generic.h"
#include "devices.h"
@@ -107,6 +109,7 @@ static unsigned long palmte2_pin_config[] __initdata = {
GPIO1_RST, /* reset */
GPIO4_GPIO, /* Hotsync button */
GPIO9_GPIO, /* power detect */
+ GPIO15_GPIO, /* earphone detect */
GPIO37_GPIO, /* LCD power */
GPIO56_GPIO, /* Backlight power */
};
@@ -318,11 +321,18 @@ static struct pxaficp_platform_data palmte2_ficp_platform_data = {
/******************************************************************************
* UDC
******************************************************************************/
-static struct pxa2xx_udc_mach_info palmte2_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmte2_udc_info = {
.gpio_vbus = GPIO_NR_PALMTE2_USB_DETECT_N,
.gpio_vbus_inverted = 1,
.gpio_pullup = GPIO_NR_PALMTE2_USB_PULLUP,
- .gpio_pullup_inverted = 0,
+};
+
+static struct platform_device palmte2_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmte2_udc_info,
+ },
};
/******************************************************************************
@@ -395,6 +405,21 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
};
/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palmte2_asoc_pdata = {
+ .jack_gpio = GPIO_NR_PALMTE2_EARPHONE_DETECT,
+};
+
+static struct platform_device palmte2_asoc = {
+ .name = "palm27x-asoc",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmte2_asoc_pdata,
+ },
+};
+
+/******************************************************************************
* Framebuffer
******************************************************************************/
static struct pxafb_mode_info palmte2_lcd_modes[] = {
@@ -429,6 +454,8 @@ static struct platform_device *devices[] __initdata = {
#endif
&palmte2_backlight,
&power_supply,
+ &palmte2_asoc,
+ &palmte2_gpio_vbus,
};
/* setup udc GPIOs initial state */
@@ -447,7 +474,6 @@ static void __init palmte2_init(void)
set_pxa_fb_info(&palmte2_lcd_screen);
pxa_set_mci_info(&palmte2_mci_platform_data);
palmte2_udc_init();
- pxa_set_udc_info(&palmte2_udc_info);
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmte2_ficp_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index e99a893..6c15d84 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -27,6 +27,7 @@
#include <linux/gpio.h>
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -359,11 +360,18 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
/******************************************************************************
* UDC
******************************************************************************/
-static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+static struct gpio_vbus_mach_info palmtx_udc_info = {
.gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
.gpio_vbus_inverted = 1,
.gpio_pullup = GPIO_NR_PALMTX_USB_PULLUP,
- .gpio_pullup_inverted = 0,
+};
+
+static struct platform_device palmtx_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtx_udc_info,
+ },
};
/******************************************************************************
@@ -483,30 +491,18 @@ static struct pxafb_mach_info palmtx_lcd_screen = {
/******************************************************************************
* Power management - standby
******************************************************************************/
-#ifdef CONFIG_PM
-static u32 *addr __initdata;
-static u32 resume[3] __initdata = {
- 0xe3a00101, /* mov r0, #0x40000000 */
- 0xe380060f, /* orr r0, r0, #0x00f00000 */
- 0xe590f008, /* ldr pc, [r0, #0x08] */
-};
-
-static int __init palmtx_pm_init(void)
+static void __init palmtx_pm_init(void)
{
- int i;
-
- /* this is where the bootloader jumps */
- addr = phys_to_virt(PALMTX_STR_BASE);
-
- for (i = 0; i < 3; i++)
- addr[i] = resume[i];
-
- return 0;
+ static u32 resume[] = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+ };
+
+ /* copy the bootloader */
+ memcpy(phys_to_virt(PALMTX_STR_BASE), resume, sizeof(resume));
}
-device_initcall(palmtx_pm_init);
-#endif
-
/******************************************************************************
* Machine init
******************************************************************************/
@@ -517,6 +513,7 @@ static struct platform_device *devices[] __initdata = {
&palmtx_backlight,
&power_supply,
&palmtx_asoc,
+ &palmtx_gpio_vbus,
};
static struct map_desc palmtx_io_desc[] __initdata = {
@@ -548,11 +545,11 @@ static void __init palmtx_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+ palmtx_pm_init();
set_pxa_fb_info(&palmtx_lcd_screen);
pxa_set_mci_info(&palmtx_mci_platform_data);
palmtx_udc_init();
pxa_set_ac97_info(&palmtx_ac97_pdata);
- pxa_set_udc_info(&palmtx_udc_info);
pxa_set_ficp_info(&palmtx_ficp_platform_data);
pxa_set_keypad_info(&palmtx_keypad_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 6c12b5a..095521e 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -28,7 +28,7 @@
#include <media/soc_camera.h>
#include <asm/gpio.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/camera.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 884b174..7693355 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -79,7 +79,7 @@ static int pxa_pm_valid(suspend_state_t state)
return -EINVAL;
}
-static int pxa_pm_prepare(void)
+int pxa_pm_prepare(void)
{
int ret = 0;
@@ -89,7 +89,7 @@ static int pxa_pm_prepare(void)
return ret;
}
-static void pxa_pm_finish(void)
+void pxa_pm_finish(void)
{
if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->finish)
pxa_cpu_pm_fns->finish();
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 036bbde..ac431ed 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -39,7 +39,7 @@
#include <mach/pxa25x.h>
#include <mach/mmc.h>
#include <mach/udc.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/irda.h>
#include <mach/poodle.h>
#include <mach/pxafb.h>
@@ -214,13 +214,8 @@ static struct ads7846_platform_data poodle_ads7846_info = {
.gpio_pendown = POODLE_GPIO_TP_INT,
};
-static void ads7846_cs(u32 command)
-{
- gpio_set_value(POODLE_GPIO_TP_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
static struct pxa2xx_spi_chip poodle_ads7846_chip = {
- .cs_control = ads7846_cs,
+ .gpio_cs = POODLE_GPIO_TP_CS,
};
static struct spi_board_info poodle_spi_devices[] = {
@@ -236,14 +231,6 @@ static struct spi_board_info poodle_spi_devices[] = {
static void __init poodle_init_spi(void)
{
- int err;
-
- err = gpio_request(POODLE_GPIO_TP_CS, "ADS7846_CS");
- if (err)
- return;
-
- gpio_direction_output(POODLE_GPIO_TP_CS, 1);
-
pxa2xx_set_spi_info(1, &poodle_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index a425ec7..ec68cc1 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -27,7 +27,7 @@
#include <mach/ohci.h>
#include <mach/pm.h>
#include <mach/dma.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
@@ -204,6 +204,23 @@ static struct clk_lookup pxa27x_clkregs[] = {
#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
/*
+ * allow platforms to override default PWRMODE setting used for PM_SUSPEND_MEM
+ */
+static unsigned int pwrmode = PWRMODE_SLEEP;
+
+int __init pxa27x_set_pwrmode(unsigned int mode)
+{
+ switch (mode) {
+ case PWRMODE_SLEEP:
+ case PWRMODE_DEEPSLEEP:
+ pwrmode = mode;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+/*
* List of global PXA peripheral registers to preserve.
* More ones like CP and general purpose register values are preserved
* with the stack pointer in sleep.S.
@@ -254,7 +271,7 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
pxa_cpu_standby();
break;
case PM_SUSPEND_MEM:
- pxa27x_cpu_suspend(PWRMODE_SLEEP);
+ pxa27x_cpu_suspend(pwrmode);
break;
}
}
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b02d454..6f678d9 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -30,7 +30,7 @@
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/ssp.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
@@ -552,7 +552,7 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
}
static struct platform_device *devices[] __initdata = {
-/* &pxa_device_udc, The UDC driver is PXA25x only */
+ &pxa27x_device_udc,
&pxa_device_ffuart,
&pxa_device_btuart,
&pxa_device_stuart,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index ff82399..8241a63 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -27,7 +27,7 @@
#include <asm/mach/arch.h>
#include <mach/pxa930.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/pxafb.h>
#include "devices.h"
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 047909a..55259f4 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -7,7 +7,7 @@
*
*/
-#include <asm/hardware/sharpsl_pm.h>
+#include <mach/sharpsl_pm.h>
/*
* SharpSL SSP Driver
@@ -44,8 +44,6 @@ void corgi_lcdtg_hw_init(int mode);
extern struct battery_thresh spitz_battery_levels_acin[];
extern struct battery_thresh spitz_battery_levels_noac[];
-void sharpsl_pm_pxa_init(void);
-void sharpsl_pm_pxa_remove(void);
int sharpsl_pm_pxa_read_max1111(int channel);
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 16b4ec6..2546c06 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -15,20 +15,69 @@
#undef DEBUG
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
-#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/apm-emulation.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/suspend.h>
+#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/pm.h>
+#include <mach/pxa2xx-regs.h>
#include <mach/pxa2xx-gpio.h>
+#include <mach/regs-rtc.h>
#include <mach/sharpsl.h>
+#include <mach/sharpsl_pm.h>
+
#include "sharpsl.h"
+/*
+ * Constants
+ */
+#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */
+#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */
+#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */
+#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */
+
+#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */
+#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */
+#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */
+#define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */
+#define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */
+#define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */
+
+/*
+ * Prototypes
+ */
+#ifdef CONFIG_PM
+static int sharpsl_off_charge_battery(void);
+static int sharpsl_check_battery_voltage(void);
+static int sharpsl_fatal_check(void);
+#endif
+static int sharpsl_check_battery_temp(void);
+static int sharpsl_ac_check(void);
+static int sharpsl_average_value(int ad);
+static void sharpsl_average_clear(void);
+static void sharpsl_charge_toggle(struct work_struct *private_);
+static void sharpsl_battery_thread(struct work_struct *private_);
+
+
+/*
+ * Variables
+ */
+struct sharpsl_pm_status sharpsl_pm;
+static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
+static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
+DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
+
+
+
struct battery_thresh spitz_battery_levels_acin[] = {
{ 213, 100},
{ 212, 98},
@@ -144,42 +193,789 @@ int sharpsl_pm_pxa_read_max1111(int channel)
#endif
}
-void sharpsl_pm_pxa_init(void)
+static int get_percentage(int voltage)
+{
+ int i = sharpsl_pm.machinfo->bat_levels - 1;
+ int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
+ struct battery_thresh *thresh;
+
+ if (sharpsl_pm.charge_mode == CHRG_ON)
+ thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
+ else
+ thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
+
+ while (i > 0 && (voltage > thresh[i].voltage))
+ i--;
+
+ return thresh[i].percentage;
+}
+
+static int get_apm_status(int voltage)
+{
+ int low_thresh, high_thresh;
+
+ if (sharpsl_pm.charge_mode == CHRG_ON) {
+ high_thresh = sharpsl_pm.machinfo->status_high_acin;
+ low_thresh = sharpsl_pm.machinfo->status_low_acin;
+ } else {
+ high_thresh = sharpsl_pm.machinfo->status_high_noac;
+ low_thresh = sharpsl_pm.machinfo->status_low_noac;
+ }
+
+ if (voltage >= high_thresh)
+ return APM_BATTERY_STATUS_HIGH;
+ if (voltage >= low_thresh)
+ return APM_BATTERY_STATUS_LOW;
+ return APM_BATTERY_STATUS_CRITICAL;
+}
+
+void sharpsl_battery_kick(void)
+{
+ schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
+}
+EXPORT_SYMBOL(sharpsl_battery_kick);
+
+
+static void sharpsl_battery_thread(struct work_struct *private_)
+{
+ int voltage, percent, apm_status, i = 0;
+
+ if (!sharpsl_pm.machinfo)
+ return;
+
+ sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
+
+ /* Corgi cannot confirm when battery fully charged so periodically kick! */
+ if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
+ && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL))
+ schedule_delayed_work(&toggle_charger, 0);
+
+ while(1) {
+ voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+
+ if (voltage > 0) break;
+ if (i++ > 5) {
+ voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
+ dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
+ break;
+ }
+ }
+
+ voltage = sharpsl_average_value(voltage);
+ apm_status = get_apm_status(voltage);
+ percent = get_percentage(voltage);
+
+ /* At low battery voltages, the voltage has a tendency to start
+ creeping back up so we try to avoid this here */
+ if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) {
+ sharpsl_pm.battstat.mainbat_voltage = voltage;
+ sharpsl_pm.battstat.mainbat_status = apm_status;
+ sharpsl_pm.battstat.mainbat_percent = percent;
+ }
+
+ dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
+ sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
+
+#ifdef CONFIG_BACKLIGHT_CORGI
+ /* If battery is low. limit backlight intensity to save power. */
+ if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+ && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
+ (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
+ if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
+ sharpsl_pm.machinfo->backlight_limit(1);
+ sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
+ }
+ } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
+ sharpsl_pm.machinfo->backlight_limit(0);
+ sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
+ }
+#endif
+
+ /* Suspend if critical battery level */
+ if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
+ && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
+ && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
+ sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+ dev_err(sharpsl_pm.dev, "Fatal Off\n");
+ apm_queue_event(APM_CRITICAL_SUSPEND);
+ }
+
+ schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
+}
+
+void sharpsl_pm_led(int val)
+{
+ if (val == SHARPSL_LED_ERROR) {
+ dev_err(sharpsl_pm.dev, "Charging Error!\n");
+ } else if (val == SHARPSL_LED_ON) {
+ dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
+ led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
+ } else {
+ dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
+ led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
+ }
+}
+
+static void sharpsl_charge_on(void)
+{
+ dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
+
+ sharpsl_pm.full_count = 0;
+ sharpsl_pm.charge_mode = CHRG_ON;
+ schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
+ schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
+}
+
+static void sharpsl_charge_off(void)
+{
+ dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
+
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm_led(SHARPSL_LED_OFF);
+ sharpsl_pm.charge_mode = CHRG_OFF;
+
+ schedule_delayed_work(&sharpsl_bat, 0);
+}
+
+static void sharpsl_charge_error(void)
{
- pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
- pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN);
- pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN);
+ sharpsl_pm_led(SHARPSL_LED_ERROR);
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm.charge_mode = CHRG_ERROR;
+}
+
+static void sharpsl_charge_toggle(struct work_struct *private_)
+{
+ dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
+
+ if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+ sharpsl_charge_off();
+ return;
+ } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
+ sharpsl_charge_error();
+ return;
+ }
+
+ sharpsl_pm_led(SHARPSL_LED_ON);
+ sharpsl_pm.machinfo->charge(0);
+ mdelay(SHARPSL_CHARGE_WAIT_TIME);
+ sharpsl_pm.machinfo->charge(1);
+
+ sharpsl_pm.charge_start_time = jiffies;
+}
+
+static void sharpsl_ac_timer(unsigned long data)
+{
+ int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+ dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
+
+ sharpsl_average_clear();
+ if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
+ sharpsl_charge_on();
+ else if (sharpsl_pm.charge_mode == CHRG_ON)
+ sharpsl_charge_off();
+
+ schedule_delayed_work(&sharpsl_bat, 0);
+}
+
+
+static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
+{
+ /* Delay the event slightly to debounce */
+ /* Must be a smaller delay than the chrg_full_isr below */
+ mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+ return IRQ_HANDLED;
+}
+
+static void sharpsl_chrg_full_timer(unsigned long data)
+{
+ dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
+
+ sharpsl_pm.full_count++;
+
+ if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+ dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
+ if (sharpsl_pm.charge_mode == CHRG_ON)
+ sharpsl_charge_off();
+ } else if (sharpsl_pm.full_count < 2) {
+ dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
+ schedule_delayed_work(&toggle_charger, 0);
+ } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
+ dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
+ schedule_delayed_work(&toggle_charger, 0);
+ } else {
+ sharpsl_charge_off();
+ sharpsl_pm.charge_mode = CHRG_DONE;
+ dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
+ }
+}
+
+/* Charging Finished Interrupt (Not present on Corgi) */
+/* Can trigger at the same time as an AC status change so
+ delay until after that has been processed */
+static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
+{
+ if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
+ return IRQ_HANDLED;
+
+ /* delay until after any ac interrupt */
+ mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
+{
+ int is_fatal = 0;
+
+ if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
+ dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
+ is_fatal = 1;
+ }
+
+ if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
+ dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
+ is_fatal = 1;
+ }
+
+ if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
+ sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
+ apm_queue_event(APM_CRITICAL_SUSPEND);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Maintain an average of the last 10 readings
+ */
+#define SHARPSL_CNV_VALUE_NUM 10
+static int sharpsl_ad_index;
+
+static void sharpsl_average_clear(void)
+{
+ sharpsl_ad_index = 0;
+}
+
+static int sharpsl_average_value(int ad)
+{
+ int i, ad_val = 0;
+ static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
+
+ if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
+ sharpsl_ad_index = 0;
+ return ad;
+ }
+
+ sharpsl_ad[sharpsl_ad_index] = ad;
+ sharpsl_ad_index++;
+ if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
+ for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
+ sharpsl_ad[i] = sharpsl_ad[i+1];
+ sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
+ }
+ for (i=0; i < sharpsl_ad_index; i++)
+ ad_val += sharpsl_ad[i];
+
+ return (ad_val / sharpsl_ad_index);
+}
+
+/*
+ * Take an array of 5 integers, remove the maximum and minimum values
+ * and return the average.
+ */
+static int get_select_val(int *val)
+{
+ int i, j, k, temp, sum = 0;
+
+ /* Find MAX val */
+ temp = val[0];
+ j=0;
+ for (i=1; i<5; i++) {
+ if (temp < val[i]) {
+ temp = val[i];
+ j = i;
+ }
+ }
+
+ /* Find MIN val */
+ temp = val[4];
+ k=4;
+ for (i=3; i>=0; i--) {
+ if (temp > val[i]) {
+ temp = val[i];
+ k = i;
+ }
+ }
+
+ for (i=0; i<5; i++)
+ if (i != j && i != k )
+ sum += val[i];
+
+ dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
+
+ return (sum/3);
+}
+
+static int sharpsl_check_battery_temp(void)
+{
+ int val, i, buff[5];
+
+ /* Check battery temperature */
+ for (i=0; i<5; i++) {
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+ sharpsl_pm.machinfo->measure_temp(1);
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
+ buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
+ sharpsl_pm.machinfo->measure_temp(0);
+ }
+
+ val = get_select_val(buff);
+
+ dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
+ if (val > sharpsl_pm.machinfo->charge_on_temp) {
+ printk(KERN_WARNING "Not charging: temperature out of limits.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_check_battery_voltage(void)
+{
+ int val, i, buff[5];
+
+ /* disable charge, enable discharge */
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm.machinfo->discharge(1);
+ mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+
+ if (sharpsl_pm.machinfo->discharge1)
+ sharpsl_pm.machinfo->discharge1(1);
+
+ /* Check battery voltage */
+ for (i=0; i<5; i++) {
+ buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+ }
+
+ if (sharpsl_pm.machinfo->discharge1)
+ sharpsl_pm.machinfo->discharge1(0);
+
+ sharpsl_pm.machinfo->discharge(0);
+
+ val = get_select_val(buff);
+ dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
+
+ if (val < sharpsl_pm.machinfo->charge_on_volt)
+ return -1;
+
+ return 0;
+}
+#endif
+
+static int sharpsl_ac_check(void)
+{
+ int temp, i, buff[5];
+
+ for (i=0; i<5; i++) {
+ buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
+ }
+
+ temp = get_select_val(buff);
+ dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
+
+ if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
+ dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ sharpsl_pm.flags |= SHARPSL_SUSPENDED;
+ flush_scheduled_work();
+
+ if (sharpsl_pm.charge_mode == CHRG_ON)
+ sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
+ else
+ sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+
+ return 0;
+}
+
+static int sharpsl_pm_resume(struct platform_device *pdev)
+{
+ /* Clear the reset source indicators as they break the bootloader upon reboot */
+ RCSR = 0x0f;
+ sharpsl_average_clear();
+ sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
+ sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
+
+ return 0;
+}
+
+static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+ dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
+
+ dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
+ /* not charging and AC-IN! */
+
+ if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
+ dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
+ sharpsl_pm.charge_mode = CHRG_OFF;
+ sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
+ sharpsl_off_charge_battery();
+ }
+
+ sharpsl_pm.machinfo->presuspend();
+
+ PEDR = 0xffffffff; /* clear it */
+
+ sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
+ if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
+ RTSR &= RTSR_ALE;
+ RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
+ dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
+ sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
+ } else if (alarm_enable) {
+ RTSR &= RTSR_ALE;
+ RTAR = alarm_time;
+ dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
+ } else {
+ dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
+ }
+
+ pxa_pm_enter(state);
+
+ sharpsl_pm.machinfo->postsuspend();
+
+ dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
+}
+
+static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
+{
+ if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
+ {
+ if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
+ dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
+ corgi_goto_sleep(alarm_time, alarm_enable, state);
+ return 1;
+ }
+ if(sharpsl_off_charge_battery()) {
+ dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
+ corgi_goto_sleep(alarm_time, alarm_enable, state);
+ return 1;
+ }
+ dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
+ }
+
+ if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
+ {
+ dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
+ corgi_goto_sleep(alarm_time, alarm_enable, state);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int corgi_pxa_pm_enter(suspend_state_t state)
+{
+ unsigned long alarm_time = RTAR;
+ unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
+
+ dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
+
+ corgi_goto_sleep(alarm_time, alarm_status, state);
+
+ while (corgi_enter_suspend(alarm_time,alarm_status,state))
+ {}
+
+ if (sharpsl_pm.machinfo->earlyresume)
+ sharpsl_pm.machinfo->earlyresume();
+
+ dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
+
+ return 0;
+}
+
+/*
+ * Check for fatal battery errors
+ * Fatal returns -1
+ */
+static int sharpsl_fatal_check(void)
+{
+ int buff[5], temp, i, acin;
+
+ dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
+
+ /* Check AC-Adapter */
+ acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
+
+ if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+ sharpsl_pm.machinfo->charge(0);
+ udelay(100);
+ sharpsl_pm.machinfo->discharge(1); /* enable discharge */
+ mdelay(SHARPSL_WAIT_DISCHARGE_ON);
+ }
+
+ if (sharpsl_pm.machinfo->discharge1)
+ sharpsl_pm.machinfo->discharge1(1);
+
+ /* Check battery : check inserting battery ? */
+ for (i=0; i<5; i++) {
+ buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
+ mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
+ }
+
+ if (sharpsl_pm.machinfo->discharge1)
+ sharpsl_pm.machinfo->discharge1(0);
+
+ if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
+ udelay(100);
+ sharpsl_pm.machinfo->charge(1);
+ sharpsl_pm.machinfo->discharge(0);
+ }
+
+ temp = get_select_val(buff);
+ dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
+
+ if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
+ (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
+ return -1;
+ return 0;
+}
+
+static int sharpsl_off_charge_error(void)
+{
+ dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm_led(SHARPSL_LED_ERROR);
+ sharpsl_pm.charge_mode = CHRG_ERROR;
+ return 1;
+}
+
+/*
+ * Charging Control while suspended
+ * Return 1 - go straight to sleep
+ * Return 0 - sleep or wakeup depending on other factors
+ */
+static int sharpsl_off_charge_battery(void)
+{
+ int time;
+
+ dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
+
+ if (sharpsl_pm.charge_mode == CHRG_OFF) {
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
+
+ /* AC Check */
+ if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
+ return sharpsl_off_charge_error();
+
+ /* Start Charging */
+ sharpsl_pm_led(SHARPSL_LED_ON);
+ sharpsl_pm.machinfo->charge(0);
+ mdelay(SHARPSL_CHARGE_WAIT_TIME);
+ sharpsl_pm.machinfo->charge(1);
+
+ sharpsl_pm.charge_mode = CHRG_ON;
+ sharpsl_pm.full_count = 0;
+
+ return 1;
+ } else if (sharpsl_pm.charge_mode != CHRG_ON) {
+ return 1;
+ }
+
+ if (sharpsl_pm.full_count == 0) {
+ int time;
+
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
+
+ if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
+ return sharpsl_off_charge_error();
+
+ sharpsl_pm.machinfo->charge(0);
+ mdelay(SHARPSL_CHARGE_WAIT_TIME);
+ sharpsl_pm.machinfo->charge(1);
+ sharpsl_pm.charge_mode = CHRG_ON;
+
+ mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+ time = RCNR;
+ while(1) {
+ /* Check if any wakeup event had occurred */
+ if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+ return 0;
+ /* Check for timeout */
+ if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
+ return 1;
+ if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
+ sharpsl_pm.full_count++;
+ sharpsl_pm.machinfo->charge(0);
+ mdelay(SHARPSL_CHARGE_WAIT_TIME);
+ sharpsl_pm.machinfo->charge(1);
+ return 1;
+ }
+ }
+ }
+
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
+
+ mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
+
+ time = RCNR;
+ while(1) {
+ /* Check if any wakeup event had occurred */
+ if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+ return 0;
+ /* Check for timeout */
+ if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
+ if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
+ sharpsl_pm.full_count = 0;
+ }
+ sharpsl_pm.full_count++;
+ return 1;
+ }
+ if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
+ dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
+ sharpsl_pm_led(SHARPSL_LED_OFF);
+ sharpsl_pm.machinfo->charge(0);
+ sharpsl_pm.charge_mode = CHRG_DONE;
+ return 1;
+ }
+ }
+}
+#else
+#define sharpsl_pm_suspend NULL
+#define sharpsl_pm_resume NULL
+#endif
+
+static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
+}
+
+static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
+}
+
+static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
+static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
+
+extern void (*apm_get_power_status)(struct apm_power_info *);
+
+static void sharpsl_apm_get_power_status(struct apm_power_info *info)
+{
+ info->ac_line_status = sharpsl_pm.battstat.ac_status;
+
+ if (sharpsl_pm.charge_mode == CHRG_ON)
+ info->battery_status = APM_BATTERY_STATUS_CHARGING;
+ else
+ info->battery_status = sharpsl_pm.battstat.mainbat_status;
+
+ info->battery_flag = (1 << info->battery_status);
+ info->battery_life = sharpsl_pm.battstat.mainbat_percent;
+}
+
+#ifdef CONFIG_PM
+static struct platform_suspend_ops sharpsl_pm_ops = {
+ .prepare = pxa_pm_prepare,
+ .finish = pxa_pm_finish,
+ .enter = corgi_pxa_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+#endif
+
+static int __init sharpsl_pm_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ if (!pdev->dev.platform_data)
+ return -EINVAL;
+
+ sharpsl_pm.dev = &pdev->dev;
+ sharpsl_pm.machinfo = pdev->dev.platform_data;
+ sharpsl_pm.charge_mode = CHRG_OFF;
+ sharpsl_pm.flags = 0;
+
+ init_timer(&sharpsl_pm.ac_timer);
+ sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
+
+ init_timer(&sharpsl_pm.chrg_full_timer);
+ sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
+
+ led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
+
+ sharpsl_pm.machinfo->init();
+
+ gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN");
+ gpio_direction_input(sharpsl_pm.machinfo->gpio_acin);
+ gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full");
+ gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull);
+ gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock");
+ gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
/* Register interrupt handlers */
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
}
- else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH);
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
}
- else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING);
if (sharpsl_pm.machinfo->gpio_fatal) {
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
}
- else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING);
}
if (sharpsl_pm.machinfo->batfull_irq)
{
/* Register interrupt handler. */
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
+ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
}
- else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING);
}
+
+ ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
+ ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
+ if (ret != 0)
+ dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
+
+ apm_get_power_status = sharpsl_apm_get_power_status;
+
+#ifdef CONFIG_PM
+ suspend_set_ops(&sharpsl_pm_ops);
+#endif
+
+ mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
+
+ return 0;
}
-void sharpsl_pm_pxa_remove(void)
+static int sharpsl_pm_remove(struct platform_device *pdev)
{
+ suspend_set_ops(NULL);
+
+ device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
+ device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
+
+ led_trigger_unregister_simple(sharpsl_charge_led_trigger);
+
free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
@@ -188,4 +984,39 @@ void sharpsl_pm_pxa_remove(void)
if (sharpsl_pm.machinfo->batfull_irq)
free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+
+ gpio_free(sharpsl_pm.machinfo->gpio_batlock);
+ gpio_free(sharpsl_pm.machinfo->gpio_batfull);
+ gpio_free(sharpsl_pm.machinfo->gpio_acin);
+
+ if (sharpsl_pm.machinfo->exit)
+ sharpsl_pm.machinfo->exit();
+
+ del_timer_sync(&sharpsl_pm.chrg_full_timer);
+ del_timer_sync(&sharpsl_pm.ac_timer);
+
+ return 0;
}
+
+static struct platform_driver sharpsl_pm_driver = {
+ .probe = sharpsl_pm_probe,
+ .remove = sharpsl_pm_remove,
+ .suspend = sharpsl_pm_suspend,
+ .resume = sharpsl_pm_resume,
+ .driver = {
+ .name = "sharpsl-pm",
+ },
+};
+
+static int __devinit sharpsl_pm_init(void)
+{
+ return platform_driver_register(&sharpsl_pm_driver);
+}
+
+static void sharpsl_pm_exit(void)
+{
+ platform_driver_unregister(&sharpsl_pm_driver);
+}
+
+late_initcall(sharpsl_pm_init);
+module_exit(sharpsl_pm_exit);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 5a45fe3..dda310f 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -13,19 +13,11 @@
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <linux/mmc/host.h>
#include <linux/mtd/physmap.h>
-#include <linux/pm.h>
-#include <linux/backlight.h>
-#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#include <linux/spi/spi.h>
@@ -34,31 +26,22 @@
#include <linux/mtd/sharpsl.h>
#include <asm/setup.h>
-#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <asm/mach/sharpsl_param.h>
+#include <asm/hardware/scoop.h>
+
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/reset.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/irda.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
-#include <mach/udc.h>
#include <mach/pxafb.h>
#include <mach/pxa2xx_spi.h>
#include <mach/spitz.h>
-#include <mach/sharpsl.h>
-
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/scoop.h>
#include "generic.h"
#include "devices.h"
@@ -317,13 +300,8 @@ static struct ads7846_platform_data spitz_ads7846_info = {
.wait_for_sync = spitz_wait_for_hsync,
};
-static void spitz_ads7846_cs(u32 command)
-{
- gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
static struct pxa2xx_spi_chip spitz_ads7846_chip = {
- .cs_control = spitz_ads7846_cs,
+ .gpio_cs = SPITZ_GPIO_ADS7846_CS,
};
static void spitz_bl_kick_battery(void)
@@ -347,22 +325,12 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = {
.kick_battery = spitz_bl_kick_battery,
};
-static void spitz_lcdcon_cs(u32 command)
-{
- gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
- .cs_control = spitz_lcdcon_cs,
+ .gpio_cs = SPITZ_GPIO_LCDCON_CS,
};
-static void spitz_max1111_cs(u32 command)
-{
- gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
-}
-
static struct pxa2xx_spi_chip spitz_max1111_chip = {
- .cs_control = spitz_max1111_cs,
+ .gpio_cs = SPITZ_GPIO_MAX1111_CS,
};
static struct spi_board_info spitz_spi_devices[] = {
@@ -392,30 +360,6 @@ static struct spi_board_info spitz_spi_devices[] = {
static void __init spitz_init_spi(void)
{
- int err;
-
- err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS");
- if (err)
- return;
-
- err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS");
- if (err)
- goto err_free_1;
-
- err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS");
- if (err)
- goto err_free_2;
-
- err = gpio_direction_output(SPITZ_GPIO_ADS7846_CS, 1);
- if (err)
- goto err_free_3;
- err = gpio_direction_output(SPITZ_GPIO_LCDCON_CS, 1);
- if (err)
- goto err_free_3;
- err = gpio_direction_output(SPITZ_GPIO_MAX1111_CS, 1);
- if (err)
- goto err_free_3;
-
if (machine_is_akita()) {
spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
@@ -423,14 +367,6 @@ static void __init spitz_init_spi(void)
pxa2xx_set_spi_info(2, &spitz_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
- return;
-
-err_free_3:
- gpio_free(SPITZ_GPIO_MAX1111_CS);
-err_free_2:
- gpio_free(SPITZ_GPIO_LCDCON_CS);
-err_free_1:
- gpio_free(SPITZ_GPIO_ADS7846_CS);
}
#else
static inline void spitz_init_spi(void) {}
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 2e44905..724ffb0 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -41,7 +41,6 @@ static void spitz_charger_init(void)
{
pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN);
pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN);
- sharpsl_pm_pxa_init();
}
static void spitz_measure_temp(int on)
@@ -182,7 +181,7 @@ unsigned long spitzpm_read_devdata(int type)
struct sharpsl_charger_machinfo spitz_pm_machinfo = {
.init = spitz_charger_init,
- .exit = sharpsl_pm_pxa_remove,
+ .exit = NULL,
.gpio_batlock = SPITZ_GPIO_BAT_COVER,
.gpio_acin = SPITZ_GPIO_AC_IN,
.gpio_batfull = SPITZ_GPIO_CHRG_FULL,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
new file mode 100644
index 0000000..3b205b6
--- /dev/null
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -0,0 +1,796 @@
+/*
+ * linux/arch/arm/mach-pxa/stargate2.c
+ *
+ * Author: Ed C. Epp
+ * Created: Nov 05, 2002
+ * Copyright: Intel Corp.
+ *
+ * Modified 2009: Jonathan Cameron <jic23@cam.ac.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/i2c/pcf857x.h>
+#include <linux/i2c/at24.h>
+#include <linux/smc91x.h>
+#include <linux/gpio.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <mach/pxa27x.h>
+#include <plat/i2c.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pxa27x-udc.h>
+
+#include <linux/spi/spi.h>
+#include <linux/mfd/da903x.h>
+#include <linux/sht15.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Bluetooth */
+#define SG2_BT_RESET 81
+
+/* SD */
+#define SG2_GPIO_nSD_DETECT 90
+#define SG2_SD_POWER_ENABLE 89
+
+static unsigned long stargate2_pin_config[] __initdata = {
+
+ GPIO15_nCS_1, /* SRAM */
+ /* SMC91x */
+ GPIO80_nCS_4,
+ GPIO40_GPIO, /*cable detect?*/
+ /* Device Identification for wakeup*/
+ GPIO102_GPIO,
+
+ /* Button */
+ GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
+
+ /* DA9030 */
+ GPIO1_GPIO,
+
+ /* Compact Flash */
+ GPIO79_PSKTSEL,
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO120_GPIO, /* Buff ctrl */
+ GPIO108_GPIO, /* Power ctrl */
+ GPIO82_GPIO, /* Reset */
+ GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO90_GPIO, /* nSD detect */
+ GPIO89_GPIO, /* SD_POWER_ENABLE */
+
+ /* Bluetooth */
+ GPIO81_GPIO, /* reset */
+
+ /* cc2420 802.15.4 radio */
+ GPIO22_GPIO, /* CC_RSTN (out)*/
+ GPIO114_GPIO, /* CC_FIFO (in) */
+ GPIO116_GPIO, /* CC_CCA (in) */
+ GPIO0_GPIO, /* CC_FIFOP (in) */
+ GPIO16_GPIO, /* CCSFD (in) */
+ GPIO39_GPIO, /* CSn (out) */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* SSP 3 - 802.15.4 radio */
+ GPIO39_GPIO, /* chip select */
+ GPIO34_SSP3_SCLK,
+ GPIO35_SSP3_TXD,
+ GPIO41_SSP3_RXD,
+
+ /* SSP 2 */
+ GPIO11_SSP2_RXD,
+ GPIO38_SSP2_TXD,
+ GPIO36_SSP2_SCLK,
+ GPIO37_GPIO, /* chip select */
+
+ /* SSP 1 */
+ GPIO26_SSP1_RXD,
+ GPIO25_SSP1_TXD,
+ GPIO23_SSP1_SCLK,
+ GPIO24_GPIO, /* chip select */
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* Basic sensor board */
+ GPIO96_GPIO, /* accelerometer interrupt */
+ GPIO99_GPIO, /* ADC interrupt */
+
+ /* Connector pins specified as gpios */
+ GPIO94_GPIO, /* large basic connector pin 14 */
+ GPIO10_GPIO, /* large basic connector pin 23 */
+
+ /* SHT15 */
+ GPIO100_GPIO,
+ GPIO98_GPIO,
+};
+
+/**
+ * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
+ **/
+static int stargate2_reset_bluetooth(void)
+{
+ int err;
+ err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
+ if (err) {
+ printk(KERN_ERR "Could not get gpio for bluetooth reset \n");
+ return err;
+ }
+ gpio_direction_output(SG2_BT_RESET, 1);
+ mdelay(5);
+ /* now reset it - 5 msec minimum */
+ gpio_set_value(SG2_BT_RESET, 0);
+ mdelay(10);
+ gpio_set_value(SG2_BT_RESET, 1);
+ gpio_free(SG2_BT_RESET);
+ return 0;
+}
+
+static struct led_info stargate2_leds[] = {
+ {
+ .name = "sg2:red",
+ .flags = DA9030_LED_RATE_ON,
+ }, {
+ .name = "sg2:blue",
+ .flags = DA9030_LED_RATE_ON,
+ }, {
+ .name = "sg2:green",
+ .flags = DA9030_LED_RATE_ON,
+ },
+};
+
+static struct sht15_platform_data platform_data_sht15 = {
+ .gpio_data = 100,
+ .gpio_sck = 98,
+};
+
+static struct platform_device sht15 = {
+ .name = "sht15",
+ .id = -1,
+ .dev = {
+ .platform_data = &platform_data_sht15,
+ },
+};
+
+static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
+ {
+ .dev = &sht15.dev,
+ .supply = "vcc",
+ },
+};
+
+enum stargate2_ldos{
+ vcc_vref,
+ vcc_cc2420,
+ /* a mote connector? */
+ vcc_mica,
+ /* the CSR bluecore chip */
+ vcc_bt,
+ /* The two voltages available to sensor boards */
+ vcc_sensor_1_8,
+ vcc_sensor_3,
+ /* directly connected to the pxa27x */
+ vcc_sram_ext,
+ vcc_pxa_pll,
+ vcc_pxa_usim, /* Reference voltage for certain gpios */
+ vcc_pxa_mem,
+ vcc_pxa_flash,
+ vcc_pxa_core, /*Dc-Dc buck not yet supported */
+ vcc_lcd,
+ vcc_bb,
+ vcc_bbio, /*not sure!*/
+ vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
+};
+
+/* The values of the various regulator constraints are obviously dependent
+ * on exactly what is wired to each ldo. Unfortunately this information is
+ * not generally available. More information has been requested from Xbow.
+ */
+static struct regulator_init_data stargate2_ldo_init_data[] = {
+ [vcc_bbio] = {
+ .constraints = { /* board default 1.8V */
+ .name = "vcc_bbio",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ },
+ },
+ [vcc_bb] = {
+ .constraints = { /* board default 2.8V */
+ .name = "vcc_bb",
+ .min_uV = 2700000,
+ .max_uV = 3000000,
+ },
+ },
+ [vcc_pxa_flash] = {
+ .constraints = {/* default is 1.8V */
+ .name = "vcc_pxa_flash",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ },
+ },
+ [vcc_cc2420] = { /* also vcc_io */
+ .constraints = {
+ /* board default is 2.8V */
+ .name = "vcc_cc2420",
+ .min_uV = 2700000,
+ .max_uV = 3300000,
+ },
+ },
+ [vcc_vref] = { /* Reference for what? */
+ .constraints = { /* default 1.8V */
+ .name = "vcc_vref",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ },
+ },
+ [vcc_sram_ext] = {
+ .constraints = { /* default 2.8V */
+ .name = "vcc_sram_ext",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ },
+ },
+ [vcc_mica] = {
+ .constraints = { /* default 2.8V */
+ .name = "vcc_mica",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ },
+ },
+ [vcc_bt] = {
+ .constraints = { /* default 2.8V */
+ .name = "vcc_bt",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ },
+ },
+ [vcc_lcd] = {
+ .constraints = { /* default 2.8V */
+ .name = "vcc_lcd",
+ .min_uV = 2700000,
+ .max_uV = 3300000,
+ },
+ },
+ [vcc_io] = { /* Same or higher than everything
+ * bar vccbat and vccusb */
+ .constraints = { /* default 2.8V */
+ .name = "vcc_io",
+ .min_uV = 2692000,
+ .max_uV = 3300000,
+ },
+ },
+ [vcc_sensor_1_8] = {
+ .constraints = { /* default 1.8V */
+ .name = "vcc_sensor_1_8",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ },
+ },
+ [vcc_sensor_3] = { /* curiously default 2.8V */
+ .constraints = {
+ .name = "vcc_sensor_3",
+ .min_uV = 2800000,
+ .max_uV = 3000000,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con),
+ .consumer_supplies = stargate2_sensor_3_con,
+ },
+ [vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
+ .constraints = {
+ .name = "vcc_pxa_pll",
+ .min_uV = 1170000,
+ .max_uV = 1430000,
+ },
+ },
+ [vcc_pxa_usim] = {
+ .constraints = { /* default 1.8V */
+ .name = "vcc_pxa_usim",
+ .min_uV = 1710000,
+ .max_uV = 2160000,
+ },
+ },
+ [vcc_pxa_mem] = {
+ .constraints = { /* default 1.8V */
+ .name = "vcc_pxa_mem",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ },
+ },
+};
+
+static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+ {
+ .name = "da903x-led",
+ .id = DA9030_ID_LED_2,
+ .platform_data = &stargate2_leds[0],
+ }, {
+ .name = "da903x-led",
+ .id = DA9030_ID_LED_3,
+ .platform_data = &stargate2_leds[2],
+ }, {
+ .name = "da903x-led",
+ .id = DA9030_ID_LED_4,
+ .platform_data = &stargate2_leds[1],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO2,
+ .platform_data = &stargate2_ldo_init_data[vcc_bbio],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO3,
+ .platform_data = &stargate2_ldo_init_data[vcc_bb],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO4,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO5,
+ .platform_data = &stargate2_ldo_init_data[vcc_cc2420],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO6,
+ .platform_data = &stargate2_ldo_init_data[vcc_vref],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO7,
+ .platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO8,
+ .platform_data = &stargate2_ldo_init_data[vcc_mica],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO9,
+ .platform_data = &stargate2_ldo_init_data[vcc_bt],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO10,
+ .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO11,
+ .platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO12,
+ .platform_data = &stargate2_ldo_init_data[vcc_lcd],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO15,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO17,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
+ }, {
+ .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
+ .id = DA9030_ID_LDO18,
+ .platform_data = &stargate2_ldo_init_data[vcc_io],
+ }, {
+ .name = "da903x-regulator",
+ .id = DA9030_ID_LDO19,
+ .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
+ },
+};
+
+static struct da903x_platform_data stargate2_da9030_pdata = {
+ .num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
+ .subdevs = stargate2_da9030_subdevs,
+};
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .name = "smc91x-regs",
+ .start = (PXA_CS4_PHYS + 0x300),
+ .end = (PXA_CS4_PHYS + 0xfffff),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_GPIO(40),
+ .end = IRQ_GPIO(40),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct smc91x_platdata stargate2_smc91x_info = {
+ .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
+ | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &stargate2_smc91x_info,
+ },
+};
+
+
+
+static struct pxamci_platform_data stargate2_mci_platform_data;
+
+/*
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert / eject.
+ */
+static int stargate2_mci_init(struct device *dev,
+ irq_handler_t stargate2_detect_int,
+ void *data)
+{
+ int err;
+
+ err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable");
+ if (err) {
+ printk(KERN_ERR "Can't get the gpio for SD power control");
+ goto return_err;
+ }
+ gpio_direction_output(SG2_SD_POWER_ENABLE, 0);
+
+ err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect");
+ if (err) {
+ printk(KERN_ERR "Can't get the sd detect gpio");
+ goto free_power_en;
+ }
+ gpio_direction_input(SG2_GPIO_nSD_DETECT);
+ /* Delay to allow for full insertion */
+ stargate2_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+ err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT),
+ stargate2_detect_int,
+ IRQ_TYPE_EDGE_BOTH,
+ "MMC card detect",
+ data);
+ if (err) {
+ printk(KERN_ERR "can't request MMC card detect IRQ\n");
+ goto free_nsd_detect;
+ }
+ return 0;
+
+ free_nsd_detect:
+ gpio_free(SG2_GPIO_nSD_DETECT);
+ free_power_en:
+ gpio_free(SG2_SD_POWER_ENABLE);
+ return_err:
+ return err;
+}
+
+/**
+ * stargate2_mci_setpower() - set state of mmc power supply
+ *
+ * Very simple control. Either it is on or off and is controlled by
+ * a gpio pin */
+static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
+{
+ gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
+}
+
+static void stargate2_mci_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data);
+ gpio_free(SG2_SD_POWER_ENABLE);
+ gpio_free(SG2_GPIO_nSD_DETECT);
+}
+
+static struct pxamci_platform_data stargate2_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .init = stargate2_mci_init,
+ .setpower = stargate2_mci_setpower,
+ .exit = stargate2_mci_exit,
+};
+
+static struct mtd_partition stargate2flash_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = 0,
+ }, {
+ .name = "Kernel",
+ .size = 0x00200000,
+ .offset = 0x00040000,
+ .mask_flags = 0
+ }, {
+ .name = "Filesystem",
+ .size = 0x01DC0000,
+ .offset = 0x00240000,
+ .mask_flags = 0
+ },
+};
+
+static struct resource flash_resources = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct flash_platform_data stargate2_flash_data = {
+ .map_name = "cfi_probe",
+ .parts = stargate2flash_partitions,
+ .nr_parts = ARRAY_SIZE(stargate2flash_partitions),
+ .name = "PXA27xOnChipROM",
+ .width = 2,
+};
+
+static struct platform_device stargate2_flash_device = {
+ .name = "pxa2xx-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &stargate2_flash_data,
+ },
+ .resource = &flash_resources,
+ .num_resources = 1,
+};
+
+/*
+ * SRAM - The Stargate 2 has 32MB of SRAM.
+ *
+ * Here it is made available as an MTD. This will then
+ * typically have a cifs filesystem created on it to provide
+ * fast temporary storage.
+ */
+static struct resource sram_resources = {
+ .start = PXA_CS1_PHYS,
+ .end = PXA_CS1_PHYS + SZ_32M-1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platdata_mtd_ram stargate2_sram_pdata = {
+ .mapname = "Stargate2 SRAM",
+ .bankwidth = 2,
+};
+
+static struct platform_device stargate2_sram = {
+ .name = "mtd-ram",
+ .id = 0,
+ .resource = &sram_resources,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &stargate2_sram_pdata,
+ },
+};
+
+static struct pcf857x_platform_data platform_data_pcf857x = {
+ .gpio_base = 128,
+ .n_latch = 0,
+ .setup = NULL,
+ .teardown = NULL,
+ .context = NULL,
+};
+
+static struct at24_platform_data pca9500_eeprom_pdata = {
+ .byte_len = 256,
+ .page_size = 4,
+};
+
+
+static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
+ /* Techically this a pca9500 - but it's compatible with the 8574
+ * for gpio expansion and the 24c02 for eeprom access.
+ */
+ {
+ .type = "pcf8574",
+ .addr = 0x27,
+ .platform_data = &platform_data_pcf857x,
+ }, {
+ .type = "24c02",
+ .addr = 0x57,
+ .platform_data = &pca9500_eeprom_pdata,
+ }, {
+ .type = "max1238",
+ .addr = 0x35,
+ }, { /* ITS400 Sensor board only */
+ .type = "max1363",
+ .addr = 0x34,
+ /* Through a nand gate - Also beware, on V2 sensor board the
+ * pull up resistors are missing.
+ */
+ .irq = IRQ_GPIO(99),
+ }, { /* ITS400 Sensor board only */
+ .type = "tsl2561",
+ .addr = 0x49,
+ /* Through a nand gate - Also beware, on V2 sensor board the
+ * pull up resistors are missing.
+ */
+ .irq = IRQ_GPIO(99),
+ }, { /* ITS400 Sensor board only */
+ .type = "tmp175",
+ .addr = 0x4A,
+ .irq = IRQ_GPIO(96),
+ },
+};
+
+static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
+ {
+ .type = "da9030",
+ .addr = 0x49,
+ .platform_data = &stargate2_da9030_pdata,
+ .irq = gpio_to_irq(1),
+ },
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
+ .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
+ .num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
+ .num_chipselect = 1,
+};
+
+/* An upcoming kernel change will scrap SFRM usage so these
+ * drivers have been moved to use gpio's via cs_control */
+static struct pxa2xx_spi_chip staccel_chip_info = {
+ .tx_threshold = 8,
+ .rx_threshold = 8,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = 24,
+};
+
+static struct pxa2xx_spi_chip cc2420_info = {
+ .tx_threshold = 8,
+ .rx_threshold = 8,
+ .dma_burst_size = 8,
+ .timeout = 235,
+ .gpio_cs = 39,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "lis3l02dq",
+ .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
+ .bus_num = 1,
+ .chip_select = 0,
+ .controller_data = &staccel_chip_info,
+ .irq = IRQ_GPIO(96),
+ }, {
+ .modalias = "cc2420",
+ .max_speed_hz = 6500000,
+ .bus_num = 3,
+ .chip_select = 0,
+ .controller_data = &cc2420_info,
+ },
+};
+
+static void sg2_udc_command(int cmd)
+{
+ switch (cmd) {
+ case PXA2XX_UDC_CMD_CONNECT:
+ UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
+ break;
+ case PXA2XX_UDC_CMD_DISCONNECT:
+ UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
+ break;
+ }
+}
+
+/* Board doesn't support cable detection - so always lie and say
+ * something is there.
+ */
+static int sg2_udc_detect(void)
+{
+ return 1;
+}
+
+static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = {
+ .udc_is_connected = sg2_udc_detect,
+ .udc_command = sg2_udc_command,
+};
+
+static struct platform_device *stargate2_devices[] = {
+ &stargate2_flash_device,
+ &stargate2_sram,
+ &smc91x_device,
+ &sht15,
+};
+
+static struct i2c_pxa_platform_data i2c_pwr_pdata = {
+ .fast_mode = 1,
+};
+
+static struct i2c_pxa_platform_data i2c_pdata = {
+ .fast_mode = 1,
+};
+
+static void __init stargate2_init(void)
+{
+ /* This is probably a board specific hack as this must be set
+ prior to connecting the MFP stuff up. */
+ MECR &= ~MECR_NOS;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
+
+ /* spi chip selects */
+ gpio_direction_output(37, 0);
+ gpio_direction_output(24, 0);
+ gpio_direction_output(39, 0);
+
+ platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
+
+ pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
+ pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
+ pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+ i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
+ i2c_register_board_info(1,
+ ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info));
+ pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
+ pxa_set_i2c_info(&i2c_pdata);
+
+ pxa_set_mci_info(&stargate2_mci_platform_data);
+
+ pxa_set_udc_info(&stargate2_udc_info);
+
+ stargate2_reset_bluetooth();
+}
+
+MACHINE_START(STARGATE2, "Stargate 2")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = stargate2_init,
+ .boot_params = 0xA0000100,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index a0bd46e..168267a 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -40,7 +40,7 @@
#include <mach/pxa25x.h>
#include <mach/reset.h>
#include <mach/irda.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/tosa_bt.h>
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index f79c9cb..825f540 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -47,7 +47,7 @@
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index dd031cc..d33c232 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -45,7 +45,7 @@
#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/regs-uart.h>
#include <mach/viper.h>
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index c256c57..cefd1c0 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -21,7 +21,7 @@
#include <linux/gpio.h>
#include <mach/pxa300.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
#include <mach/zylonite.h>
#include "generic.h"
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index b6ec106..d4cfa21 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -24,7 +24,6 @@ config REALVIEW_EB_ARM11MP
config REALVIEW_EB_ARM11MP_REVB
bool "Support ARM11MPCore RevB tile"
depends on REALVIEW_EB_ARM11MP
- default n
help
Enable support for the ARM11MPCore RevB tile on the Realview
platform. Since there are device address differences, a
@@ -48,6 +47,15 @@ config MACH_REALVIEW_PB1176
help
Include support for the ARM(R) RealView ARM1176 Platform Baseboard.
+config REALVIEW_PB1176_SECURE_FLASH
+ bool "Allow access to the secure flash memory block"
+ depends on MACH_REALVIEW_PB1176
+ default n
+ help
+ Select this option if Linux will only run in secure mode on the
+ RealView PB1176 platform and access to the secure flash memory
+ block (64MB @ 0x3c000000) is required.
+
config MACH_REALVIEW_PBA8
bool "Support RealView/PB-A8 platform"
select CPU_V7
@@ -58,6 +66,13 @@ config MACH_REALVIEW_PBA8
PB-A8 is a platform with an on-board Cortex-A8 and has support for
PCI-E and Compact Flash.
+config MACH_REALVIEW_PBX
+ bool "Support RealView/PBX platform"
+ select ARM_GIC
+ select HAVE_PATA_PLATFORM
+ help
+ Include support for the ARM(R) RealView PBX platform.
+
config REALVIEW_HIGH_PHYS_OFFSET
bool "High physical base address for the RealView platform"
depends on !MACH_REALVIEW_PB1176
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 7bea8ff..e704edb 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -7,5 +7,7 @@ obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o
obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o
obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o
obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_MACH_REALVIEW_PBX) += realview_pbx.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 076acbc..9ea9c05 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -48,6 +48,9 @@
#include <asm/hardware/gic.h>
+#include <mach/platform.h>
+#include <mach/irqs.h>
+
#include "core.h"
#include "clock.h"
@@ -578,21 +581,22 @@ void realview_leds_event(led_event_t ledevt)
{
unsigned long flags;
u32 val;
+ u32 led = 1 << smp_processor_id();
local_irq_save(flags);
val = readl(VA_LEDS_BASE);
switch (ledevt) {
case led_idle_start:
- val = val & ~REALVIEW_SYS_LED0;
+ val = val & ~led;
break;
case led_idle_end:
- val = val | REALVIEW_SYS_LED0;
+ val = val | led;
break;
case led_timer:
- val = val ^ REALVIEW_SYS_LED1;
+ val = val ^ REALVIEW_SYS_LED7;
break;
case led_halted:
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 21c0863..59a337b 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -51,9 +51,6 @@ extern struct mmc_platform_data realview_mmc0_plat_data;
extern struct mmc_platform_data realview_mmc1_plat_data;
extern struct clcd_board clcd_plat_data;
extern void __iomem *gic_cpu_base_addr;
-#ifdef CONFIG_LOCAL_TIMERS
-extern void __iomem *twd_base;
-#endif
extern void __iomem *timer0_va_base;
extern void __iomem *timer1_va_base;
extern void __iomem *timer2_va_base;
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
index 268d770..794a8d9 100644
--- a/arch/arm/mach-realview/include/mach/board-eb.h
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -62,111 +62,6 @@
#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */
#endif
-#define IRQ_EB_GIC_START 32
-
-/*
- * RealView EB interrupt sources
- */
-#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */
-#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */
-#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */
-#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */
-#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */
-#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */
-#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */
-#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */
-#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */
- /* 9 reserved */
-#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */
-#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */
-#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */
-#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */
-#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */
-#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */
-#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */
-#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */
-#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */
-#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */
-#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */
-#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */
-#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */
-#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */
-#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */
-#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */
-#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */
-#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */
-#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */
-#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */
-#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */
-#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */
-
-/*
- * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
- */
-#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0)
-#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1)
-#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2)
-#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3)
-#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4)
-#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5)
-#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6)
-#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7)
-#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8)
-#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9)
-#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */
-#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */
-#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */
-#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */
-#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14)
-#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15)
-
-#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17)
-#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18)
-#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19)
-#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20)
-#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21)
-#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22)
-#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23)
-#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24)
-#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25)
-#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26)
-#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27)
-#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28)
-
-#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29)
-#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30)
-#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31)
-
-#define IRQ_EB11MP_UART2 -1
-#define IRQ_EB11MP_UART3 -1
-#define IRQ_EB11MP_CLCD -1
-#define IRQ_EB11MP_DMA -1
-#define IRQ_EB11MP_WDOG -1
-#define IRQ_EB11MP_GPIO0 -1
-#define IRQ_EB11MP_GPIO1 -1
-#define IRQ_EB11MP_GPIO2 -1
-#define IRQ_EB11MP_SCI -1
-#define IRQ_EB11MP_SSP -1
-
-#define NR_GIC_EB11MP 2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_EB
- */
-#define NR_IRQS_EB (IRQ_EB_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_EB) \
- && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
-#undef NR_IRQS
-#define NR_IRQS NR_IRQS_EB
-#endif
-
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
- && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
-#undef MAX_GIC_NR
-#define MAX_GIC_NR NR_GIC_EB11MP
-#endif
-
/*
* Core tile identification (REALVIEW_SYS_PROCID)
*/
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 858eea7..98f8e7e 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -32,6 +32,8 @@
#define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */
#define REALVIEW_PB1176_FLASH_BASE 0x30000000
#define REALVIEW_PB1176_FLASH_SIZE SZ_64M
+#define REALVIEW_PB1176_SEC_FLASH_BASE 0x3C000000 /* Secure flash */
+#define REALVIEW_PB1176_SEC_FLASH_SIZE SZ_64M
#define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */
#define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */
@@ -71,82 +73,4 @@
#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */
#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */
-/*
- * Irqs
- */
-#define IRQ_DC1176_GIC_START 32
-#define IRQ_PB1176_GIC_START 64
-
-/*
- * ARM1176 DevChip interrupt sources (primary GIC)
- */
-#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */
-#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */
-#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */
-#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */
-#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */
-#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */
-#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */
-#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11)
-#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12)
-#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13)
-#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14)
-#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */
-#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */
-#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */
-#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */
-#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */
-
-#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */
-#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */
-
-/*
- * RealView PB1176 interrupt sources (secondary GIC)
- */
-#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */
-#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */
-#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */
-#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */
-#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5)
-#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */
-#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */
-#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8)
-#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9)
-#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */
-#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */
-
-#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16)
-
-#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */
-
-#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22)
-#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23)
-#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */
-#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */
-
-#define IRQ_PB1176_GPIO0 -1
-#define IRQ_PB1176_SSP -1
-#define IRQ_PB1176_SCTL -1
-
-#define NR_GIC_PB1176 2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB1176
- */
-#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB1176)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
-#undef NR_IRQS
-#define NR_IRQS NR_IRQS_PB1176
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR NR_GIC_PB1176
-#endif
-
-#endif /* CONFIG_MACH_REALVIEW_PB1176 */
-
#endif /* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
index 53ea0e7..f0d68e0 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -81,105 +81,4 @@
#define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */
#define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */
-/*
- * Irqs
- */
-#define IRQ_TC11MP_GIC_START 32
-#define IRQ_PB11MP_GIC_START 64
-
-/*
- * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
- */
-#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0)
-#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1)
-#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2)
-#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3)
-#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4)
-#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5)
-#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6)
-#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7)
-#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8)
-#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9)
-#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */
-#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */
-#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */
-#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */
-#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14)
-#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15)
-
-#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17)
-#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18)
-#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19)
-#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20)
-#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21)
-#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22)
-#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23)
-#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24)
-#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25)
-#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26)
-#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27)
-#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28)
-
-#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29)
-#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30)
-#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31)
-
-/*
- * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
- */
-#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */
-#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */
-#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */
-#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */
-#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */
-#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */
-#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */
- /* 9 reserved */
-#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */
-#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */
-#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */
-#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */
-#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */
-#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */
-#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */
-#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */
-#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */
-#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */
-#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */
-#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */
-#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */
-#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */
-#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */
-#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */
-#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */
-#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */
-#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */
-#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */
-#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */
-#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */
-
-#define IRQ_PB11MP_SMC -1
-#define IRQ_PB11MP_SCTL -1
-
-#define NR_GIC_PB11MP 2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB11MP
- */
-#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB11MP)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
-#undef NR_IRQS
-#define NR_IRQS NR_IRQS_PB11MP
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR NR_GIC_PB11MP
-#endif
-
-#endif /* CONFIG_MACH_REALVIEW_PB11MP */
-
#endif /* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/include/mach/board-pba8.h
index 307f97b..4dfc67a 100644
--- a/arch/arm/mach-realview/include/mach/board-pba8.h
+++ b/arch/arm/mach-realview/include/mach/board-pba8.h
@@ -70,81 +70,4 @@
#define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */
#define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */
-/*
- * Irqs
- */
-#define IRQ_PBA8_GIC_START 32
-
-/* L220
-#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29)
-#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30)
-#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31)
-*/
-
-/*
- * PB-A8 on-board gic irq sources
- */
-#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */
-#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */
-#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */
-#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */
-#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */
-#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */
-#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */
-#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */
-#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */
- /* 9 reserved */
-#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */
-#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */
-#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */
-#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */
-#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */
-#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */
-#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */
-#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */
-#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */
-#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */
-#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */
-#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */
-#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */
-#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */
-#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */
-#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */
-#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */
-#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */
-#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */
-#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */
-#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */
-#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */
-
-/* ... */
-#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50)
-#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51)
-#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52)
-#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53)
-
-#define IRQ_PBA8_SMC -1
-#define IRQ_PBA8_SCTL -1
-
-#define NR_GIC_PBA8 1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBA8
- */
-#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64)
-
-#if defined(CONFIG_MACH_REALVIEW_PBA8)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
-#undef NR_IRQS
-#define NR_IRQS NR_IRQS_PBA8
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR NR_GIC_PBA8
-#endif
-
-#endif /* CONFIG_MACH_REALVIEW_PBA8 */
-
#endif /* __ASM_ARCH_BOARD_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pbx.h b/arch/arm/mach-realview/include/mach/board-pbx.h
new file mode 100644
index 0000000..848bfff
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pbx.h
@@ -0,0 +1,108 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-pbx.h
+ *
+ * Copyright (C) 2009 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_BOARD_PBX_H
+#define __ASM_ARCH_BOARD_PBX_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PBX_UART0_BASE 0x10009000 /* UART 0 */
+#define REALVIEW_PBX_UART1_BASE 0x1000A000 /* UART 1 */
+#define REALVIEW_PBX_UART2_BASE 0x1000B000 /* UART 2 */
+#define REALVIEW_PBX_UART3_BASE 0x1000C000 /* UART 3 */
+#define REALVIEW_PBX_SSP_BASE 0x1000D000 /* Synchronous Serial Port */
+#define REALVIEW_PBX_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */
+#define REALVIEW_PBX_WATCHDOG_BASE 0x10010000 /* watchdog interface */
+#define REALVIEW_PBX_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */
+#define REALVIEW_PBX_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */
+#define REALVIEW_PBX_GPIO0_BASE 0x10013000 /* GPIO port 0 */
+#define REALVIEW_PBX_RTC_BASE 0x10017000 /* Real Time Clock */
+#define REALVIEW_PBX_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */
+#define REALVIEW_PBX_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */
+#define REALVIEW_PBX_SCTL_BASE 0x1001A000 /* System Controller */
+#define REALVIEW_PBX_CLCD_BASE 0x10020000 /* CLCD */
+#define REALVIEW_PBX_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */
+#define REALVIEW_PBX_DMC_BASE 0x100E0000 /* DMC configuration */
+#define REALVIEW_PBX_SMC_BASE 0x100E1000 /* SMC configuration */
+#define REALVIEW_PBX_CAN_BASE 0x100E2000 /* CAN bus */
+#define REALVIEW_PBX_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */
+#define REALVIEW_PBX_FLASH0_BASE 0x40000000
+#define REALVIEW_PBX_FLASH0_SIZE SZ_64M
+#define REALVIEW_PBX_FLASH1_BASE 0x44000000
+#define REALVIEW_PBX_FLASH1_SIZE SZ_64M
+#define REALVIEW_PBX_ETH_BASE 0x4E000000 /* Ethernet */
+#define REALVIEW_PBX_USB_BASE 0x4F000000 /* USB */
+#define REALVIEW_PBX_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */
+#define REALVIEW_PBX_LT_BASE 0xC0000000 /* Logic Tile expansion */
+#define REALVIEW_PBX_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */
+#define REALVIEW_PBX_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */
+
+/*
+ * Tile-specific addresses
+ */
+#define REALVIEW_PBX_TILE_SCU_BASE 0x1F000000 /* SCU registers */
+#define REALVIEW_PBX_TILE_GIC_CPU_BASE 0x1F000100 /* Private Generic interrupt controller CPU interface */
+#define REALVIEW_PBX_TILE_TWD_BASE 0x1F000600
+#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE 0x1F000700
+#define REALVIEW_PBX_TILE_TWD_SIZE 0x00000100
+#define REALVIEW_PBX_TILE_GIC_DIST_BASE 0x1F001000 /* Private Generic interrupt controller distributor */
+#define REALVIEW_PBX_TILE_L220_BASE 0x1F002000 /* L220 registers */
+
+#define REALVIEW_PBX_SYS_PLD_CTRL1 0x74
+
+/*
+ * PBX PCI regions
+ */
+#define REALVIEW_PBX_PCI_BASE 0x90040000 /* PCI-X Unit base */
+#define REALVIEW_PBX_PCI_IO_BASE 0x90050000 /* IO Region on AHB */
+#define REALVIEW_PBX_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */
+
+#define REALVIEW_PBX_PCI_BASE_SIZE 0x10000 /* 16 Kb */
+#define REALVIEW_PBX_PCI_IO_SIZE 0x1000 /* 4 Kb */
+#define REALVIEW_PBX_PCI_MEM_SIZE 0x20000000 /* 512 MB */
+
+/*
+ * Core tile identification (REALVIEW_SYS_PROCID)
+ */
+#define REALVIEW_PBX_PROC_MASK 0xFF000000
+#define REALVIEW_PBX_PROC_ARM7TDMI 0x00000000
+#define REALVIEW_PBX_PROC_ARM9 0x02000000
+#define REALVIEW_PBX_PROC_ARM11 0x04000000
+#define REALVIEW_PBX_PROC_ARM11MP 0x06000000
+#define REALVIEW_PBX_PROC_A9MP 0x0C000000
+#define REALVIEW_PBX_PROC_A8 0x0E000000
+
+#define check_pbx_proc(proc_type) \
+ ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \
+ == proc_type)
+
+#ifdef CONFIG_MACH_REALVIEW_PBX
+#define core_tile_pbx11mp() check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP)
+#define core_tile_pbxa9mp() check_pbx_proc(REALVIEW_PBX_PROC_A9MP)
+#define core_tile_pbxa8() check_pbx_proc(REALVIEW_PBX_PROC_A8)
+#else
+#define core_tile_pbx11mp() 0
+#define core_tile_pbxa9mp() 0
+#define core_tile_pbxa8() 0
+#endif
+
+#endif /* __ASM_ARCH_BOARD_PBX_H */
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 92dbcb9..932d8af 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -12,7 +12,8 @@
#if defined(CONFIG_MACH_REALVIEW_EB) || \
defined(CONFIG_MACH_REALVIEW_PB11MP) || \
- defined(CONFIG_MACH_REALVIEW_PBA8)
+ defined(CONFIG_MACH_REALVIEW_PBA8) || \
+ defined(CONFIG_MACH_REALVIEW_PBX)
#ifndef DEBUG_LL_UART_OFFSET
#define DEBUG_LL_UART_OFFSET 0x00009000
#elif DEBUG_LL_UART_OFFSET != 0x00009000
diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/include/mach/irqs-eb.h
new file mode 100644
index 0000000..204d537
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-eb.h
@@ -0,0 +1,129 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-eb.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_EB_H
+#define __MACH_IRQS_EB_H
+
+#define IRQ_EB_GIC_START 32
+
+/*
+ * RealView EB interrupt sources
+ */
+#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */
+#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */
+#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */
+#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */
+#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */
+#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */
+#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */
+ /* 9 reserved */
+#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */
+#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */
+#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */
+#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */
+#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */
+#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */
+#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */
+#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */
+#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */
+#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */
+#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */
+#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */
+#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */
+#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */
+#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */
+#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */
+#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */
+#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */
+#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */
+#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */
+#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */
+#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */
+
+/*
+ * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
+ */
+#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0)
+#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1)
+#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2)
+#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3)
+#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4)
+#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5)
+#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6)
+#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7)
+#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8)
+#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9)
+#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */
+#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */
+#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */
+#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */
+#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14)
+#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15)
+
+#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17)
+#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18)
+#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19)
+#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20)
+#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21)
+#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22)
+#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23)
+#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24)
+#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25)
+#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26)
+#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27)
+#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28)
+
+#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29)
+#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30)
+#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31)
+
+#define IRQ_EB11MP_UART2 -1
+#define IRQ_EB11MP_UART3 -1
+#define IRQ_EB11MP_CLCD -1
+#define IRQ_EB11MP_DMA -1
+#define IRQ_EB11MP_WDOG -1
+#define IRQ_EB11MP_GPIO0 -1
+#define IRQ_EB11MP_GPIO1 -1
+#define IRQ_EB11MP_GPIO2 -1
+#define IRQ_EB11MP_SCI -1
+#define IRQ_EB11MP_SSP -1
+
+#define NR_GIC_EB11MP 2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_EB
+ */
+#define NR_IRQS_EB (IRQ_EB_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_EB) \
+ && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_EB
+#endif
+
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
+ && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_EB11MP
+#endif
+
+#endif /* __MACH_IRQS_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
new file mode 100644
index 0000000..2410d4f
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -0,0 +1,99 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb1176.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB1176_H
+#define __MACH_IRQS_PB1176_H
+
+#define IRQ_DC1176_GIC_START 32
+#define IRQ_PB1176_GIC_START 64
+
+/*
+ * ARM1176 DevChip interrupt sources (primary GIC)
+ */
+#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */
+#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */
+#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */
+#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */
+#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */
+#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11)
+#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12)
+#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13)
+#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14)
+#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */
+#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */
+#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */
+#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */
+#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */
+
+#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */
+#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */
+
+/*
+ * RealView PB1176 interrupt sources (secondary GIC)
+ */
+#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */
+#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */
+#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */
+#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */
+#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5)
+#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */
+#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */
+#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8)
+#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9)
+#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */
+#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */
+
+#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16)
+
+#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */
+
+#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22)
+#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23)
+#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */
+#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */
+
+#define IRQ_PB1176_GPIO0 -1
+#define IRQ_PB1176_SSP -1
+#define IRQ_PB1176_SCTL -1
+
+#define NR_GIC_PB1176 2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB1176
+ */
+#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB1176)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_PB1176
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_PB1176
+#endif
+
+#endif /* CONFIG_MACH_REALVIEW_PB1176 */
+
+#endif /* __MACH_IRQS_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
new file mode 100644
index 0000000..34e255a
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
@@ -0,0 +1,122 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb11mp.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB11MP_H
+#define __MACH_IRQS_PB11MP_H
+
+#define IRQ_TC11MP_GIC_START 32
+#define IRQ_PB11MP_GIC_START 64
+
+/*
+ * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
+ */
+#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0)
+#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1)
+#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2)
+#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3)
+#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4)
+#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5)
+#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6)
+#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7)
+#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8)
+#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9)
+#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */
+#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */
+#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */
+#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */
+#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14)
+#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15)
+
+#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17)
+#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18)
+#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19)
+#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20)
+#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21)
+#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22)
+#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23)
+#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24)
+#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25)
+#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26)
+#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27)
+#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28)
+
+#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29)
+#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30)
+#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31)
+
+/*
+ * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
+ */
+#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */
+#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */
+#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */
+#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */
+#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */
+ /* 9 reserved */
+#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */
+#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */
+#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */
+#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */
+#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */
+#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */
+#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */
+#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */
+#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */
+#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */
+#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */
+#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */
+#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */
+#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */
+#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */
+#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */
+#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */
+#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */
+#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */
+#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */
+#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */
+#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */
+
+#define IRQ_PB11MP_SMC -1
+#define IRQ_PB11MP_SCTL -1
+
+#define NR_GIC_PB11MP 2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB11MP
+ */
+#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB11MP)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_PB11MP
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_PB11MP
+#endif
+
+#endif /* CONFIG_MACH_REALVIEW_PB11MP */
+
+#endif /* __MACH_IRQS_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h
new file mode 100644
index 0000000..86792a9
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pba8.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PBA8_H
+#define __MACH_IRQS_PBA8_H
+
+#define IRQ_PBA8_GIC_START 32
+
+/* L220
+#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29)
+#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30)
+#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31)
+*/
+
+/*
+ * PB-A8 on-board gic irq sources
+ */
+#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */
+#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */
+#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */
+#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */
+#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */
+#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */
+#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */
+ /* 9 reserved */
+#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */
+#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */
+#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */
+#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */
+#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */
+#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */
+#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */
+#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */
+#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */
+#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */
+#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */
+#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */
+#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */
+#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */
+#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */
+#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */
+#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */
+#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */
+#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */
+#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */
+#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */
+#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */
+
+/* ... */
+#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50)
+#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51)
+#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52)
+#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53)
+
+#define IRQ_PBA8_SMC -1
+#define IRQ_PBA8_SCTL -1
+
+#define NR_GIC_PBA8 1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBA8
+ */
+#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64)
+
+#if defined(CONFIG_MACH_REALVIEW_PBA8)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_PBA8
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_PBA8
+#endif
+
+#endif /* CONFIG_MACH_REALVIEW_PBA8 */
+
+#endif /* __MACH_IRQS_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h
new file mode 100644
index 0000000..deaad43
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs-pbx.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pbx.h
+ *
+ * Copyright (C) 2009 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __MACH_IRQS_PBX_H
+#define __MACH_IRQS_PBX_H
+
+#define IRQ_PBX_GIC_START 32
+
+/* L220
+#define IRQ_PBX_L220_EVENT (IRQ_PBX_GIC_START + 29)
+#define IRQ_PBX_L220_SLAVE (IRQ_PBX_GIC_START + 30)
+#define IRQ_PBX_L220_DECODE (IRQ_PBX_GIC_START + 31)
+*/
+
+/*
+ * PBX on-board gic irq sources
+ */
+#define IRQ_PBX_WATCHDOG (IRQ_PBX_GIC_START + 0) /* Watchdog timer */
+#define IRQ_PBX_SOFT (IRQ_PBX_GIC_START + 1) /* Software interrupt */
+#define IRQ_PBX_COMMRx (IRQ_PBX_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_PBX_COMMTx (IRQ_PBX_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_PBX_TIMER0_1 (IRQ_PBX_GIC_START + 4) /* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER2_3 (IRQ_PBX_GIC_START + 5) /* Timer 2/3 */
+#define IRQ_PBX_GPIO0 (IRQ_PBX_GIC_START + 6) /* GPIO 0 */
+#define IRQ_PBX_GPIO1 (IRQ_PBX_GIC_START + 7) /* GPIO 1 */
+#define IRQ_PBX_GPIO2 (IRQ_PBX_GIC_START + 8) /* GPIO 2 */
+ /* 9 reserved */
+#define IRQ_PBX_RTC (IRQ_PBX_GIC_START + 10) /* Real Time Clock */
+#define IRQ_PBX_SSP (IRQ_PBX_GIC_START + 11) /* Synchronous Serial Port */
+#define IRQ_PBX_UART0 (IRQ_PBX_GIC_START + 12) /* UART 0 on development chip */
+#define IRQ_PBX_UART1 (IRQ_PBX_GIC_START + 13) /* UART 1 on development chip */
+#define IRQ_PBX_UART2 (IRQ_PBX_GIC_START + 14) /* UART 2 on development chip */
+#define IRQ_PBX_UART3 (IRQ_PBX_GIC_START + 15) /* UART 3 on development chip */
+#define IRQ_PBX_SCI (IRQ_PBX_GIC_START + 16) /* Smart Card Interface */
+#define IRQ_PBX_MMCI0A (IRQ_PBX_GIC_START + 17) /* Multimedia Card 0A */
+#define IRQ_PBX_MMCI0B (IRQ_PBX_GIC_START + 18) /* Multimedia Card 0B */
+#define IRQ_PBX_AACI (IRQ_PBX_GIC_START + 19) /* Audio Codec */
+#define IRQ_PBX_KMI0 (IRQ_PBX_GIC_START + 20) /* Keyboard/Mouse port 0 */
+#define IRQ_PBX_KMI1 (IRQ_PBX_GIC_START + 21) /* Keyboard/Mouse port 1 */
+#define IRQ_PBX_CHARLCD (IRQ_PBX_GIC_START + 22) /* Character LCD */
+#define IRQ_PBX_CLCD (IRQ_PBX_GIC_START + 23) /* CLCD controller */
+#define IRQ_PBX_DMAC (IRQ_PBX_GIC_START + 24) /* DMA controller */
+#define IRQ_PBX_PWRFAIL (IRQ_PBX_GIC_START + 25) /* Power failure */
+#define IRQ_PBX_PISMO (IRQ_PBX_GIC_START + 26) /* PISMO interface */
+#define IRQ_PBX_DoC (IRQ_PBX_GIC_START + 27) /* Disk on Chip memory controller */
+#define IRQ_PBX_ETH (IRQ_PBX_GIC_START + 28) /* Ethernet controller */
+#define IRQ_PBX_USB (IRQ_PBX_GIC_START + 29) /* USB controller */
+#define IRQ_PBX_TSPEN (IRQ_PBX_GIC_START + 30) /* Touchscreen pen */
+#define IRQ_PBX_TSKPAD (IRQ_PBX_GIC_START + 31) /* Touchscreen keypad */
+
+#define IRQ_PBX_PMU_SCU0 (IRQ_PBX_GIC_START + 32) /* SCU PMU Interrupts (11mp) */
+#define IRQ_PBX_PMU_SCU1 (IRQ_PBX_GIC_START + 33)
+#define IRQ_PBX_PMU_SCU2 (IRQ_PBX_GIC_START + 34)
+#define IRQ_PBX_PMU_SCU3 (IRQ_PBX_GIC_START + 35)
+#define IRQ_PBX_PMU_SCU4 (IRQ_PBX_GIC_START + 36)
+#define IRQ_PBX_PMU_SCU5 (IRQ_PBX_GIC_START + 37)
+#define IRQ_PBX_PMU_SCU6 (IRQ_PBX_GIC_START + 38)
+#define IRQ_PBX_PMU_SCU7 (IRQ_PBX_GIC_START + 39)
+
+#define IRQ_PBX_WATCHDOG1 (IRQ_PBX_GIC_START + 40) /* Watchdog1 timer */
+#define IRQ_PBX_TIMER4_5 (IRQ_PBX_GIC_START + 41) /* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER6_7 (IRQ_PBX_GIC_START + 42) /* Timer 2/3 */
+/* ... */
+#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */
+#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 45)
+#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 46)
+#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 47)
+
+/* ... */
+#define IRQ_PBX_PCI0 (IRQ_PBX_GIC_START + 50)
+#define IRQ_PBX_PCI1 (IRQ_PBX_GIC_START + 51)
+#define IRQ_PBX_PCI2 (IRQ_PBX_GIC_START + 52)
+#define IRQ_PBX_PCI3 (IRQ_PBX_GIC_START + 53)
+
+#define IRQ_PBX_SMC -1
+#define IRQ_PBX_SCTL -1
+
+#define NR_GIC_PBX 1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBX
+ */
+#define NR_IRQS_PBX (IRQ_PBX_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PBX)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_PBX
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_PBX
+#endif
+
+#endif /* CONFIG_MACH_REALVIEW_PBX */
+
+#endif /* __MACH_IRQS_PBX_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
index fe5cb98..78854f2 100644
--- a/arch/arm/mach-realview/include/mach/irqs.h
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -22,10 +22,11 @@
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pb1176.h>
-#include <mach/board-pba8.h>
+#include <mach/irqs-eb.h>
+#include <mach/irqs-pb11mp.h>
+#include <mach/irqs-pb1176.h>
+#include <mach/irqs-pba8.h>
+#include <mach/irqs-pbx.h>
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30
diff --git a/arch/arm/mach-realview/include/mach/scu.h b/arch/arm/mach-realview/include/mach/scu.h
deleted file mode 100644
index d55802d..0000000
--- a/arch/arm/mach-realview/include/mach/scu.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASMARM_ARCH_SCU_H
-#define __ASMARM_ARCH_SCU_H
-
-/*
- * SCU registers
- */
-#define SCU_CTRL 0x00
-#define SCU_CONFIG 0x04
-#define SCU_CPU_STATUS 0x08
-#define SCU_INVALIDATE 0x0c
-#define SCU_FPGA_REVISION 0x10
-
-#endif
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
index 415d634..8305037 100644
--- a/arch/arm/mach-realview/include/mach/uncompress.h
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -24,6 +24,7 @@
#include <mach/board-pb11mp.h>
#include <mach/board-pb1176.h>
#include <mach/board-pba8.h>
+#include <mach/board-pbx.h>
#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00))
#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c))
@@ -43,6 +44,8 @@ static inline unsigned long get_uart_base(void)
return REALVIEW_PB1176_UART0_BASE;
else if (machine_is_realview_pba8())
return REALVIEW_PBA8_UART0_BASE;
+ else if (machine_is_realview_pbx())
+ return REALVIEW_PBX_UART0_BASE;
else
return 0;
}
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 1c01d13..60b4e11 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -9,196 +9,18 @@
* published by the Free Software Foundation.
*/
#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/device.h>
#include <linux/smp.h>
-#include <linux/jiffies.h>
-#include <linux/percpu.h>
#include <linux/clockchips.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/hardware/arm_twd.h>
-#include <asm/hardware/gic.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
-
-static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
-
-/*
- * Used on SMP for either the local timer or IPI_TIMER
- */
-void local_timer_interrupt(void)
-{
- struct clock_event_device *clk = &__get_cpu_var(local_clockevent);
-
- clk->event_handler(clk);
-}
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/* set up by the platform code */
-void __iomem *twd_base;
-
-static unsigned long mpcore_timer_rate;
-
-static void local_timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *clk)
-{
- unsigned long ctrl;
-
- switch(mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- /* timer load already set up */
- ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
- | TWD_TIMER_CONTROL_PERIODIC;
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /* period set, and timer enabled in 'next_event' hook */
- ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- default:
- ctrl = 0;
- }
-
- __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
-}
-
-static int local_timer_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
-
- __raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
- __raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, twd_base + TWD_TIMER_CONTROL);
-
- return 0;
-}
-
-/*
- * local_timer_ack: checks for a local timer interrupt.
- *
- * If a local timer interrupt has occurred, acknowledge and return 1.
- * Otherwise, return 0.
- */
-int local_timer_ack(void)
-{
- if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
- __raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
- return 1;
- }
-
- return 0;
-}
-
-static void __cpuinit twd_calibrate_rate(void)
-{
- unsigned long load, count;
- u64 waitjiffies;
-
- /*
- * If this is the first time round, we need to work out how fast
- * the timer ticks
- */
- if (mpcore_timer_rate == 0) {
- printk("Calibrating local timer... ");
-
- /* Wait for a tick to start */
- waitjiffies = get_jiffies_64() + 1;
-
- while (get_jiffies_64() < waitjiffies)
- udelay(10);
-
- /* OK, now the tick has started, let's get the timer going */
- waitjiffies += 5;
-
- /* enable, no interrupt or reload */
- __raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
-
- /* maximum value */
- __raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
-
- while (get_jiffies_64() < waitjiffies)
- udelay(10);
-
- count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
-
- mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
-
- printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000,
- (mpcore_timer_rate / 100000) % 100);
- }
-
- load = mpcore_timer_rate / HZ;
-
- __raw_writel(load, twd_base + TWD_TIMER_LOAD);
-}
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
/*
* Setup the local clock events for a CPU.
*/
-void __cpuinit local_timer_setup(void)
-{
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
- unsigned long flags;
-
- twd_calibrate_rate();
-
- clk->name = "local_timer";
- clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
- clk->rating = 350;
- clk->set_mode = local_timer_set_mode;
- clk->set_next_event = local_timer_set_next_event;
- clk->irq = IRQ_LOCALTIMER;
- clk->cpumask = cpumask_of(cpu);
- clk->shift = 20;
- clk->mult = div_sc(mpcore_timer_rate, NSEC_PER_SEC, clk->shift);
- clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
- clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
-
- /* Make sure our local interrupt controller has this enabled */
- local_irq_save(flags);
- get_irq_chip(IRQ_LOCALTIMER)->unmask(IRQ_LOCALTIMER);
- local_irq_restore(flags);
-
- clockevents_register_device(clk);
-}
-
-/*
- * take a local timer down
- */
-void __cpuexit local_timer_stop(void)
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
{
- __raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+ evt->irq = IRQ_LOCALTIMER;
+ twd_timer_setup(evt);
}
-
-#else /* CONFIG_LOCAL_TIMERS */
-
-static void dummy_timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *clk)
-{
-}
-
-void __cpuinit local_timer_setup(void)
-{
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
-
- clk->name = "dummy_timer";
- clk->features = CLOCK_EVT_FEAT_ONESHOT |
- CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_DUMMY;
- clk->rating = 400;
- clk->mult = 1;
- clk->set_mode = dummy_timer_set_mode;
- clk->broadcast = smp_timer_broadcast;
- clk->cpumask = cpumask_of(cpu);
-
- clockevents_register_device(clk);
-}
-
-#endif /* !CONFIG_LOCAL_TIMERS */
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 30a9c68..ac0e83f 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -19,10 +19,12 @@
#include <asm/cacheflush.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
+#include <asm/localtimer.h>
#include <mach/board-eb.h>
#include <mach/board-pb11mp.h>
-#include <mach/scu.h>
+#include <mach/board-pbx.h>
+#include <asm/smp_scu.h>
#include "core.h"
@@ -40,35 +42,19 @@ static void __iomem *scu_base_addr(void)
return __io_address(REALVIEW_EB11MP_SCU_BASE);
else if (machine_is_realview_pb11mp())
return __io_address(REALVIEW_TC11MP_SCU_BASE);
+ else if (machine_is_realview_pbx() &&
+ (core_tile_pbx11mp() || core_tile_pbxa9mp()))
+ return __io_address(REALVIEW_PBX_TILE_SCU_BASE);
else
return (void __iomem *)0;
}
-static unsigned int __init get_core_count(void)
+static inline unsigned int get_core_count(void)
{
- unsigned int ncores;
void __iomem *scu_base = scu_base_addr();
-
- if (scu_base) {
- ncores = __raw_readl(scu_base + SCU_CONFIG);
- ncores = (ncores & 0x03) + 1;
- } else
- ncores = 1;
-
- return ncores;
-}
-
-/*
- * Setup the SCU
- */
-static void scu_enable(void)
-{
- u32 scu_ctrl;
- void __iomem *scu_base = scu_base_addr();
-
- scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
- scu_ctrl |= 1;
- __raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+ if (scu_base)
+ return scu_get_core_count(scu_base);
+ return 1;
}
static DEFINE_SPINLOCK(boot_lock);
@@ -184,7 +170,7 @@ void __init smp_init_cpus(void)
unsigned int i, ncores = get_core_count();
for (i = 0; i < ncores; i++)
- cpu_set(i, cpu_possible_map);
+ set_cpu_possible(i, true);
}
void __init smp_prepare_cpus(unsigned int max_cpus)
@@ -217,19 +203,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
if (max_cpus > ncores)
max_cpus = ncores;
-#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
- /*
- * Enable the local timer or broadcast device for the boot CPU.
- */
- local_timer_setup();
-#endif
-
/*
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time.
*/
for (i = 0; i < max_cpus; i++)
- cpu_set(i, cpu_present_map);
+ set_cpu_present(i, true);
/*
* Initialise the SCU if there are more than one CPU and let
@@ -239,7 +218,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
* WFI
*/
if (max_cpus > 1) {
- scu_enable();
+ /*
+ * Enable the local timer or broadcast device for the
+ * boot CPU, but only if we have more than one CPU.
+ */
+ percpu_timer_setup();
+
+ scu_enable(scu_base_addr());
poke_milo();
}
}
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index c20fbef..8dfa44e 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -32,6 +32,7 @@
#include <asm/hardware/gic.h>
#include <asm/hardware/icst307.h>
#include <asm/hardware/cache-l2x0.h>
+#include <asm/localtimer.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index a64b84a..25efe71 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -203,11 +203,23 @@ static struct amba_device *amba_devs[] __initdata = {
/*
* RealView PB1176 platform devices
*/
-static struct resource realview_pb1176_flash_resource = {
- .start = REALVIEW_PB1176_FLASH_BASE,
- .end = REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
+static struct resource realview_pb1176_flash_resources[] = {
+ [0] = {
+ .start = REALVIEW_PB1176_FLASH_BASE,
+ .end = REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = REALVIEW_PB1176_SEC_FLASH_BASE,
+ .end = REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
};
+#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH
+#define PB1176_FLASH_BLOCKS 2
+#else
+#define PB1176_FLASH_BLOCKS 1
+#endif
static struct resource realview_pb1176_smsc911x_resources[] = {
[0] = {
@@ -271,7 +283,8 @@ static void __init realview_pb1176_init(void)
l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff);
#endif
- realview_flash_register(&realview_pb1176_flash_resource, 1);
+ realview_flash_register(realview_pb1176_flash_resources,
+ PB1176_FLASH_BLOCKS);
realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
platform_device_register(&realview_i2c_device);
realview_usb_register(realview_pb1176_isp1761_resources);
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index ea1e60e..dc4b169 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -32,6 +32,7 @@
#include <asm/hardware/gic.h>
#include <asm/hardware/icst307.h>
#include <asm/hardware/cache-l2x0.h>
+#include <asm/localtimer.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
new file mode 100644
index 0000000..1fe294d
--- /dev/null
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -0,0 +1,335 @@
+/*
+ * arch/arm/mach-realview/realview_pbx.c
+ *
+ * Copyright (C) 2009 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/board-pbx.h>
+#include <mach/irqs.h>
+
+#include "core.h"
+
+static struct map_desc realview_pbx_io_desc[] __initdata = {
+ {
+ .virtual = IO_ADDRESS(REALVIEW_SYS_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_SYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+#ifdef CONFIG_PCI
+ {
+ .virtual = PCIX_UNIT_BASE,
+ .pfn = __phys_to_pfn(REALVIEW_PBX_PCI_BASE),
+ .length = REALVIEW_PBX_PCI_BASE_SIZE,
+ .type = MT_DEVICE,
+ },
+#endif
+#ifdef CONFIG_DEBUG_LL
+ {
+ .virtual = IO_ADDRESS(REALVIEW_PBX_UART0_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_UART0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+#endif
+};
+
+static struct map_desc realview_local_io_desc[] __initdata = {
+ {
+ .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE),
+ .length = SZ_8K,
+ .type = MT_DEVICE,
+ }
+};
+
+static void __init realview_pbx_map_io(void)
+{
+ iotable_init(realview_pbx_io_desc, ARRAY_SIZE(realview_pbx_io_desc));
+ if (core_tile_pbx11mp() || core_tile_pbxa9mp())
+ iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
+}
+
+/*
+ * RealView PBXCore AMBA devices
+ */
+
+#define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ }
+#define GPIO2_DMA { 0, 0 }
+#define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ }
+#define GPIO3_DMA { 0, 0 }
+#define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ }
+#define AACI_DMA { 0x80, 0x81 }
+#define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
+#define MMCI0_DMA { 0x84, 0 }
+#define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ }
+#define KMI0_DMA { 0, 0 }
+#define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ }
+#define KMI1_DMA { 0, 0 }
+#define PBX_SMC_IRQ { NO_IRQ, NO_IRQ }
+#define PBX_SMC_DMA { 0, 0 }
+#define MPMC_IRQ { NO_IRQ, NO_IRQ }
+#define MPMC_DMA { 0, 0 }
+#define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ }
+#define PBX_CLCD_DMA { 0, 0 }
+#define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ }
+#define DMAC_DMA { 0, 0 }
+#define SCTL_IRQ { NO_IRQ, NO_IRQ }
+#define SCTL_DMA { 0, 0 }
+#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ }
+#define PBX_WATCHDOG_DMA { 0, 0 }
+#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ }
+#define PBX_GPIO0_DMA { 0, 0 }
+#define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ }
+#define GPIO1_DMA { 0, 0 }
+#define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ }
+#define PBX_RTC_DMA { 0, 0 }
+#define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ }
+#define SCI_DMA { 7, 6 }
+#define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ }
+#define PBX_UART0_DMA { 15, 14 }
+#define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ }
+#define PBX_UART1_DMA { 13, 12 }
+#define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ }
+#define PBX_UART2_DMA { 11, 10 }
+#define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ }
+#define PBX_UART3_DMA { 0x86, 0x87 }
+#define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ }
+#define PBX_SSP_DMA { 9, 8 }
+
+/* FPGA Primecells */
+AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
+AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
+AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
+AMBA_DEVICE(uart3, "fpga:09", PBX_UART3, NULL);
+
+/* DevChip Primecells */
+AMBA_DEVICE(smc, "dev:00", PBX_SMC, NULL);
+AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
+AMBA_DEVICE(wdog, "dev:e1", PBX_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", PBX_GPIO0, NULL);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(rtc, "dev:e8", PBX_RTC, NULL);
+AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
+AMBA_DEVICE(uart0, "dev:f1", PBX_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:f2", PBX_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:f3", PBX_UART2, NULL);
+AMBA_DEVICE(ssp0, "dev:f4", PBX_SSP, NULL);
+
+/* Primecells on the NEC ISSP chip */
+AMBA_DEVICE(clcd, "issp:20", PBX_CLCD, &clcd_plat_data);
+AMBA_DEVICE(dmac, "issp:30", DMAC, NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+ &dmac_device,
+ &uart0_device,
+ &uart1_device,
+ &uart2_device,
+ &uart3_device,
+ &smc_device,
+ &clcd_device,
+ &sctl_device,
+ &wdog_device,
+ &gpio0_device,
+ &gpio1_device,
+ &gpio2_device,
+ &rtc_device,
+ &sci0_device,
+ &ssp0_device,
+ &aaci_device,
+ &mmc0_device,
+ &kmi0_device,
+ &kmi1_device,
+};
+
+/*
+ * RealView PB-X platform devices
+ */
+static struct resource realview_pbx_flash_resources[] = {
+ [0] = {
+ .start = REALVIEW_PBX_FLASH0_BASE,
+ .end = REALVIEW_PBX_FLASH0_BASE + REALVIEW_PBX_FLASH0_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = REALVIEW_PBX_FLASH1_BASE,
+ .end = REALVIEW_PBX_FLASH1_BASE + REALVIEW_PBX_FLASH1_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource realview_pbx_smsc911x_resources[] = {
+ [0] = {
+ .start = REALVIEW_PBX_ETH_BASE,
+ .end = REALVIEW_PBX_ETH_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PBX_ETH,
+ .end = IRQ_PBX_ETH,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource realview_pbx_isp1761_resources[] = {
+ [0] = {
+ .start = REALVIEW_PBX_USB_BASE,
+ .end = REALVIEW_PBX_USB_BASE + SZ_128K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PBX_USB,
+ .end = IRQ_PBX_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static void __init gic_init_irq(void)
+{
+ /* ARM PBX on-board GIC */
+ if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
+ gic_cpu_base_addr = __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE);
+ gic_dist_init(0, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+ 29);
+ gic_cpu_init(0, __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
+ } else {
+ gic_cpu_base_addr = __io_address(REALVIEW_PBX_GIC_CPU_BASE);
+ gic_dist_init(0, __io_address(REALVIEW_PBX_GIC_DIST_BASE),
+ IRQ_PBX_GIC_START);
+ gic_cpu_init(0, __io_address(REALVIEW_PBX_GIC_CPU_BASE));
+ }
+}
+
+static void __init realview_pbx_timer_init(void)
+{
+ timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE);
+ timer1_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE) + 0x20;
+ timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
+ timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
+
+#ifdef CONFIG_LOCAL_TIMERS
+ if (core_tile_pbx11mp() || core_tile_pbxa9mp())
+ twd_base = __io_address(REALVIEW_PBX_TILE_TWD_BASE);
+#endif
+ realview_timer_init(IRQ_PBX_TIMER0_1);
+}
+
+static struct sys_timer realview_pbx_timer = {
+ .init = realview_pbx_timer_init,
+};
+
+static void __init realview_pbx_init(void)
+{
+ int i;
+
+#ifdef CONFIG_CACHE_L2X0
+ if (core_tile_pbxa9mp()) {
+ void __iomem *l2x0_base =
+ __io_address(REALVIEW_PBX_TILE_L220_BASE);
+
+ /* set RAM latencies to 1 cycle for eASIC */
+ writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
+ writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+
+ /* 16KB way size, 8-way associativity, parity disabled
+ * Bits: .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
+ l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
+ }
+#endif
+
+ realview_flash_register(realview_pbx_flash_resources,
+ ARRAY_SIZE(realview_pbx_flash_resources));
+ realview_eth_register(NULL, realview_pbx_smsc911x_resources);
+ platform_device_register(&realview_i2c_device);
+ platform_device_register(&realview_cf_device);
+ realview_usb_register(realview_pbx_isp1761_resources);
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+
+#ifdef CONFIG_LEDS
+ leds_event = realview_leds_event;
+#endif
+}
+
+MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
+ /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+ .phys_io = REALVIEW_PBX_UART0_BASE,
+ .io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x00000100,
+ .map_io = realview_pbx_map_io,
+ .init_irq = gic_init_irq,
+ .timer = &realview_pbx_timer,
+ .init_machine = realview_pbx_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 7a7ed417..6c68e78 100644
--- a/arch/arm/mach-s3c2400/gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -33,10 +33,10 @@
int s3c2400_gpio_getirq(unsigned int pin)
{
- if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7)
- return -1; /* not valid interrupts */
+ if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE(7))
+ return -EINVAL; /* not valid interrupts */
- return (pin - S3C2410_GPE0) + IRQ_EINT0;
+ return (pin - S3C2410_GPE(0)) + IRQ_EINT0;
}
EXPORT_SYMBOL(s3c2400_gpio_getirq);
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 63a30d1..41bb65d 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -59,6 +59,7 @@ config ARCH_H1940
bool "IPAQ H1940"
select CPU_S3C2410
select PM_H1940 if PM
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the HP IPAQ H1940
@@ -70,6 +71,7 @@ config PM_H1940
config MACH_N30
bool "Acer N30 family"
select CPU_S3C2410
+ select S3C_DEV_USB_HOST
help
Say Y here if you want suppt for the Acer N30, Acer N35,
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
@@ -82,6 +84,7 @@ config ARCH_BAST
select MACH_BAST_IDE
select S3C24XX_DCLK
select ISA
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics EB2410ITX
development board (also known as BAST)
@@ -89,6 +92,7 @@ config ARCH_BAST
config MACH_OTOM
bool "NexVision OTOM Board"
select CPU_S3C2410
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision OTOM board
@@ -96,6 +100,7 @@ config MACH_AML_M5900
bool "AML M5900 Series"
select CPU_S3C2410
select PM_SIMTEC if PM
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the American Microsystems M5900 Series
<http://www.amltd.com>
@@ -111,6 +116,7 @@ config BAST_PC104_IRQ
config MACH_TCT_HAMMER
bool "TCT Hammer Board"
select CPU_S3C2410
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the TinCanTools Hammer Board
<http://www.tincantools.com>
@@ -122,12 +128,14 @@ config MACH_VR1000
select SIMTEC_NOR
select MACH_BAST_IDE
select CPU_S3C2410
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Thorcom VR1000 board.
config MACH_QT2410
bool "QT2410"
select CPU_S3C2410
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Armzone QT2410
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 440c014..dbf96e6 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -17,14 +17,16 @@
#include <linux/sysdev.h>
#include <linux/serial_core.h>
+#include <mach/map.h>
#include <mach/dma.h>
#include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 36a3132..7974afc 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -39,12 +39,12 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
unsigned long flags;
unsigned long val;
- if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
- return -1;
+ if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
+ return -EINVAL;
config &= 0xff;
- pin -= S3C2410_GPG8;
+ pin -= S3C2410_GPG(8);
reg += pin & ~3;
local_irq_save(flags);
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 5a6bc56..5aabf11 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -16,6 +16,8 @@
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/leds.h>
+#include <linux/gpio.h>
+
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
#include <mach/h1940-latch.h>
@@ -41,9 +43,9 @@ static void h1940bt_enable(int on)
h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
/* Reset the chip */
mdelay(10);
- s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+ s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
mdelay(10);
- s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+ s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
state = 1;
}
@@ -52,9 +54,9 @@ static void h1940bt_enable(int on)
led_trigger_event(bt_led_trigger, 0);
#endif
- s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+ s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
mdelay(10);
- s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+ s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
mdelay(10);
h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
@@ -87,14 +89,14 @@ static DEVICE_ATTR(enable, 0644,
static int __init h1940bt_probe(struct platform_device *pdev)
{
/* Configures BT serial port GPIOs */
- s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0);
- s3c2410_gpio_pullup(S3C2410_GPH0, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
- s3c2410_gpio_pullup(S3C2410_GPH1, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
- s3c2410_gpio_pullup(S3C2410_GPH2, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPH3, S3C2410_GPH3_RXD0);
- s3c2410_gpio_pullup(S3C2410_GPH3, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
+ s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_pullup(S3C2410_GPH(1), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+ s3c2410_gpio_pullup(S3C2410_GPH(2), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
+ s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
#ifdef CONFIG_LEDS_H1940
led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 13358ce..c3a2629 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -3,7 +3,7 @@
* Copyright (C) 2003,2004,2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * Samsung S3C241XX DMA support
+ * Samsung S3C24XX DMA support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -13,8 +13,8 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
+#include <plat/dma.h>
#include <linux/sysdev.h>
-#include <mach/hardware.h>
#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */
@@ -55,9 +55,9 @@ enum dma_ch {
/* we have 4 dma channels */
#ifndef CONFIG_CPU_S3C2443
-#define S3C2410_DMA_CHANNELS (4)
+#define S3C_DMA_CHANNELS (4)
#else
-#define S3C2410_DMA_CHANNELS (6)
+#define S3C_DMA_CHANNELS (6)
#endif
/* types */
@@ -68,7 +68,6 @@ enum s3c2410_dma_state {
S3C2410_DMA_PAUSED
};
-
/* enum s3c2410_dma_loadst
*
* This represents the state of the DMA engine, wrt to the loaded / running
@@ -104,32 +103,6 @@ enum s3c2410_dma_loadst {
S3C2410_DMALOAD_1LOADED_1RUNNING,
};
-enum s3c2410_dma_buffresult {
- S3C2410_RES_OK,
- S3C2410_RES_ERR,
- S3C2410_RES_ABORT
-};
-
-enum s3c2410_dmasrc {
- S3C2410_DMASRC_HW, /* source is memory */
- S3C2410_DMASRC_MEM /* source is hardware */
-};
-
-/* enum s3c2410_chan_op
- *
- * operation codes passed to the DMA code by the user, and also used
- * to inform the current channel owner of any changes to the system state
-*/
-
-enum s3c2410_chan_op {
- S3C2410_DMAOP_START,
- S3C2410_DMAOP_STOP,
- S3C2410_DMAOP_PAUSE,
- S3C2410_DMAOP_RESUME,
- S3C2410_DMAOP_FLUSH,
- S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */
- S3C2410_DMAOP_STARTED, /* indicate channel started */
-};
/* flags */
@@ -139,17 +112,14 @@ enum s3c2410_chan_op {
/* dma buffer */
-struct s3c2410_dma_client {
- char *name;
-};
+struct s3c2410_dma_buf;
-/* s3c2410_dma_buf_s
+/* s3c2410_dma_buf
*
* internally used buffer structure to describe a queued or running
* buffer.
*/
-struct s3c2410_dma_buf;
struct s3c2410_dma_buf {
struct s3c2410_dma_buf *next;
int magic; /* magic */
@@ -161,20 +131,6 @@ struct s3c2410_dma_buf {
/* [1] is this updated for both recv/send modes? */
-struct s3c2410_dma_chan;
-
-/* s3c2410_dma_cbfn_t
- *
- * buffer callback routine type
-*/
-
-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
- void *buf, int size,
- enum s3c2410_dma_buffresult result);
-
-typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
- enum s3c2410_chan_op );
-
struct s3c2410_dma_stats {
unsigned long loads;
unsigned long timeout_longest;
@@ -206,10 +162,10 @@ struct s3c2410_dma_chan {
/* channel configuration */
enum s3c2410_dmasrc source;
+ enum dma_ch req_ch;
unsigned long dev_addr;
unsigned long load_timeout;
unsigned int flags; /* channel flags */
- unsigned int hw_cfg; /* last hw config */
struct s3c24xx_dma_map *map; /* channel hw maps */
@@ -236,213 +192,6 @@ struct s3c2410_dma_chan {
struct sys_device dev;
};
-/* the currently allocated channel information */
-extern struct s3c2410_dma_chan s3c2410_chans[];
-
-/* note, we don't really use dma_device_t at the moment */
typedef unsigned long dma_device_t;
-/* functions --------------------------------------------------------------- */
-
-/* s3c2410_dma_request
- *
- * request a dma channel exclusivley
-*/
-
-extern int s3c2410_dma_request(unsigned int channel,
- struct s3c2410_dma_client *, void *dev);
-
-
-/* s3c2410_dma_ctrl
- *
- * change the state of the dma channel
-*/
-
-extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
-
-/* s3c2410_dma_setflags
- *
- * set the channel's flags to a given state
-*/
-
-extern int s3c2410_dma_setflags(unsigned int channel,
- unsigned int flags);
-
-/* s3c2410_dma_free
- *
- * free the dma channel (will also abort any outstanding operations)
-*/
-
-extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
-
-/* s3c2410_dma_enqueue
- *
- * place the given buffer onto the queue of operations for the channel.
- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
- * drained before the buffer is given to the DMA system.
-*/
-
-extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
- dma_addr_t data, int size);
-
-/* s3c2410_dma_config
- *
- * configure the dma channel
-*/
-
-extern int s3c2410_dma_config(unsigned int channel, int xferunit, int dcon);
-
-/* s3c2410_dma_devconfig
- *
- * configure the device we're talking to
-*/
-
-extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
- int hwcfg, unsigned long devaddr);
-
-/* s3c2410_dma_getposition
- *
- * get the position that the dma transfer is currently at
-*/
-
-extern int s3c2410_dma_getposition(unsigned int channel,
- dma_addr_t *src, dma_addr_t *dest);
-
-extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
-
-/* DMA Register definitions */
-
-#define S3C2410_DMA_DISRC (0x00)
-#define S3C2410_DMA_DISRCC (0x04)
-#define S3C2410_DMA_DIDST (0x08)
-#define S3C2410_DMA_DIDSTC (0x0C)
-#define S3C2410_DMA_DCON (0x10)
-#define S3C2410_DMA_DSTAT (0x14)
-#define S3C2410_DMA_DCSRC (0x18)
-#define S3C2410_DMA_DCDST (0x1C)
-#define S3C2410_DMA_DMASKTRIG (0x20)
-#define S3C2412_DMA_DMAREQSEL (0x24)
-#define S3C2443_DMA_DMAREQSEL (0x24)
-
-#define S3C2410_DISRCC_INC (1<<0)
-#define S3C2410_DISRCC_APB (1<<1)
-
-#define S3C2410_DMASKTRIG_STOP (1<<2)
-#define S3C2410_DMASKTRIG_ON (1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
-
-#define S3C2410_DCON_DEMAND (0<<31)
-#define S3C2410_DCON_HANDSHAKE (1<<31)
-#define S3C2410_DCON_SYNC_PCLK (0<<30)
-#define S3C2410_DCON_SYNC_HCLK (1<<30)
-
-#define S3C2410_DCON_INTREQ (1<<29)
-
-#define S3C2410_DCON_CH0_XDREQ0 (0<<24)
-#define S3C2410_DCON_CH0_UART0 (1<<24)
-#define S3C2410_DCON_CH0_SDI (2<<24)
-#define S3C2410_DCON_CH0_TIMER (3<<24)
-#define S3C2410_DCON_CH0_USBEP1 (4<<24)
-
-#define S3C2410_DCON_CH1_XDREQ1 (0<<24)
-#define S3C2410_DCON_CH1_UART1 (1<<24)
-#define S3C2410_DCON_CH1_I2SSDI (2<<24)
-#define S3C2410_DCON_CH1_SPI (3<<24)
-#define S3C2410_DCON_CH1_USBEP2 (4<<24)
-
-#define S3C2410_DCON_CH2_I2SSDO (0<<24)
-#define S3C2410_DCON_CH2_I2SSDI (1<<24)
-#define S3C2410_DCON_CH2_SDI (2<<24)
-#define S3C2410_DCON_CH2_TIMER (3<<24)
-#define S3C2410_DCON_CH2_USBEP3 (4<<24)
-
-#define S3C2410_DCON_CH3_UART2 (0<<24)
-#define S3C2410_DCON_CH3_SDI (1<<24)
-#define S3C2410_DCON_CH3_SPI (2<<24)
-#define S3C2410_DCON_CH3_TIMER (3<<24)
-#define S3C2410_DCON_CH3_USBEP4 (4<<24)
-
-#define S3C2410_DCON_SRCSHIFT (24)
-#define S3C2410_DCON_SRCMASK (7<<24)
-
-#define S3C2410_DCON_BYTE (0<<20)
-#define S3C2410_DCON_HALFWORD (1<<20)
-#define S3C2410_DCON_WORD (2<<20)
-
-#define S3C2410_DCON_AUTORELOAD (0<<22)
-#define S3C2410_DCON_NORELOAD (1<<22)
-#define S3C2410_DCON_HWTRIG (1<<23)
-
-#ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT (1<<2)
-
-#define S3C2440_DCON_CH0_I2SSDO (5<<24)
-#define S3C2440_DCON_CH0_PCMIN (6<<24)
-
-#define S3C2440_DCON_CH1_PCMOUT (5<<24)
-#define S3C2440_DCON_CH1_SDI (6<<24)
-
-#define S3C2440_DCON_CH2_PCMIN (5<<24)
-#define S3C2440_DCON_CH2_MICIN (6<<24)
-
-#define S3C2440_DCON_CH3_MICIN (5<<24)
-#define S3C2440_DCON_CH3_PCMOUT (6<<24)
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1)
-
-#define S3C2412_DMAREQSEL_HW (1)
-
-#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
-
-#endif
-
-#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1)
-
-#define S3C2443_DMAREQSEL_HW (1)
-
-#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)
-
#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
index 6c9fbb9..8fe1920 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -24,7 +24,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
{
struct s3c_gpio_chip *chip;
- if (pin > S3C2410_GPG10)
+ if (pin > S3C2410_GPG(10))
return NULL;
chip = &s3c24xx_gpios[pin/32];
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
new file mode 100644
index 0000000..801dff1
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -0,0 +1,103 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+ *
+ * Copyright (c) 2003,2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* These functions are in the to-be-removed category and it is strongly
+ * encouraged not to use these in new code. They will be marked deprecated
+ * very soon.
+ *
+ * Most of the functionality can be either replaced by the gpiocfg calls
+ * for the s3c platform or by the generic GPIOlib API.
+*/
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+/* s3c2410_gpio_cfgpin
+ *
+ * set the configuration of the given pin to the value passed.
+ *
+ * eg:
+ * s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+ * s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
+*/
+
+extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ * < 0 = no interrupt for this pin
+ * >=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern int s3c2400_gpio_getirq(unsigned int pin);
+
+#endif /* CONFIG_CPU_S3C2400 */
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ * 1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ * width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+ unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ * 0 => enable the pull-up
+ *
+ * eg;
+ *
+ * s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+ * s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+/* s3c2410_gpio_getpull
+ *
+ * Read the state of the pull-up on a given pin
+ *
+ * return:
+ * < 0 => error code
+ * 0 => enabled
+ * 1 => disabled
+*/
+
+extern int s3c2410_gpio_getpull(unsigned int pin);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
index ce1ec69..2edbb9c 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
@@ -11,6 +11,9 @@
* published by the Free Software Foundation.
*/
+#ifndef __MACH_GPIONRS_H
+#define __MACH_GPIONRS_H
+
#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
#define S3C2410_GPIO_BANKA (32*0)
@@ -21,3 +24,70 @@
#define S3C2410_GPIO_BANKF (32*5)
#define S3C2410_GPIO_BANKG (32*6)
#define S3C2410_GPIO_BANKH (32*7)
+
+/* GPIO bank sizes */
+#define S3C2410_GPIO_A_NR (32)
+#define S3C2410_GPIO_B_NR (32)
+#define S3C2410_GPIO_C_NR (32)
+#define S3C2410_GPIO_D_NR (32)
+#define S3C2410_GPIO_E_NR (32)
+#define S3C2410_GPIO_F_NR (32)
+#define S3C2410_GPIO_G_NR (32)
+#define S3C2410_GPIO_H_NR (32)
+
+#if CONFIG_S3C_GPIO_SPACE != 0
+#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
+#endif
+
+#define S3C2410_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
+
+#ifndef __ASSEMBLY__
+
+enum s3c_gpio_number {
+ S3C2410_GPIO_A_START = 0,
+ S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
+ S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
+ S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
+ S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
+ S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
+ S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
+ S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* S3C2410 GPIO number definitions. */
+
+#define S3C2410_GPA(_nr) (S3C2410_GPIO_A_START + (_nr))
+#define S3C2410_GPB(_nr) (S3C2410_GPIO_B_START + (_nr))
+#define S3C2410_GPC(_nr) (S3C2410_GPIO_C_START + (_nr))
+#define S3C2410_GPD(_nr) (S3C2410_GPIO_D_START + (_nr))
+#define S3C2410_GPE(_nr) (S3C2410_GPIO_E_START + (_nr))
+#define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr))
+#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr))
+#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr))
+
+/* compatibility until drivers can be modified */
+
+#define S3C2410_GPA0 S3C2410_GPA(0)
+#define S3C2410_GPA1 S3C2410_GPA(1)
+#define S3C2410_GPA3 S3C2410_GPA(3)
+#define S3C2410_GPA7 S3C2410_GPA(7)
+
+#define S3C2410_GPE0 S3C2410_GPE(0)
+#define S3C2410_GPE1 S3C2410_GPE(1)
+#define S3C2410_GPE2 S3C2410_GPE(2)
+#define S3C2410_GPE3 S3C2410_GPE(3)
+#define S3C2410_GPE4 S3C2410_GPE(4)
+#define S3C2410_GPE5 S3C2410_GPE(5)
+#define S3C2410_GPE6 S3C2410_GPE(6)
+#define S3C2410_GPE7 S3C2410_GPE(7)
+#define S3C2410_GPE8 S3C2410_GPE(8)
+#define S3C2410_GPE9 S3C2410_GPE(9)
+#define S3C2410_GPE10 S3C2410_GPE(10)
+
+#define S3C2410_GPH10 S3C2410_GPH(10)
+
+#endif /* __MACH_GPIONRS_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index 51a88cf..15f0b3e 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -24,5 +24,6 @@
#include <asm-generic/gpio.h>
#include <mach/gpio-nrs.h>
+#include <mach/gpio-fns.h>
#define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32)
diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h
index 74d5a1a..aef5631 100644
--- a/arch/arm/mach-s3c2410/include/mach/hardware.h
+++ b/arch/arm/mach-s3c2410/include/mach/hardware.h
@@ -15,101 +15,6 @@
#ifndef __ASSEMBLY__
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-/* s3c2410_gpio_cfgpin
- *
- * set the configuration of the given pin to the value passed.
- *
- * eg:
- * s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
- * s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
-*/
-
-extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- * < 0 = no interrupt for this pin
- * >=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irq2pin
- *
- * turn the given irq number into the corresponding GPIO number
- *
- * returns:
- * < 0 = no pin
- * >=0 = gpio pin number
-*/
-
-extern int s3c2410_gpio_irq2pin(unsigned int irq);
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern int s3c2400_gpio_getirq(unsigned int pin);
-
-#endif /* CONFIG_CPU_S3C2400 */
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- * 1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- * width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
- unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- * 0 => enable the pull-up
- *
- * eg;
- *
- * s3c2410_gpio_pullup(S3C2410_GPB0, 0);
- * s3c2410_gpio_pullup(S3C2410_GPE8, 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-/* s3c2410_gpio_getpull
- *
- * Read the state of the pull-up on a given pin
- *
- * return:
- * < 0 => error code
- * 0 => enabled
- * 1 => disabled
-*/
-
-extern int s3c2410_gpio_getpull(unsigned int pin);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
#ifdef CONFIG_CPU_S3C2440
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 255fdfe..e99b212 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -84,7 +84,6 @@
#define S3C24XX_PA_IRQ S3C2410_PA_IRQ
#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST
#define S3C24XX_PA_DMA S3C2410_PA_DMA
#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
#define S3C24XX_PA_LCD S3C2410_PA_LCD
@@ -102,6 +101,7 @@
#define S3C_PA_IIC S3C2410_PA_IIC
#define S3C_PA_UART S3C24XX_PA_UART
+#define S3C_PA_USBHOST S3C2410_PA_USBHOST
#define S3C_PA_HSMMC0 S3C2443_PA_HSMMC
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index 35a03df..b278d0c 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -69,104 +69,58 @@
#define S3C2400_GPACON S3C2410_GPIOREG(0x00)
#define S3C2400_GPADAT S3C2410_GPIOREG(0x04)
-#define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
-#define S3C2410_GPA0_OUT (0<<0)
#define S3C2410_GPA0_ADDR0 (1<<0)
-#define S3C2410_GPA1 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
-#define S3C2410_GPA1_OUT (0<<1)
#define S3C2410_GPA1_ADDR16 (1<<1)
-#define S3C2410_GPA2 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
-#define S3C2410_GPA2_OUT (0<<2)
#define S3C2410_GPA2_ADDR17 (1<<2)
-#define S3C2410_GPA3 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
-#define S3C2410_GPA3_OUT (0<<3)
#define S3C2410_GPA3_ADDR18 (1<<3)
-#define S3C2410_GPA4 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
-#define S3C2410_GPA4_OUT (0<<4)
#define S3C2410_GPA4_ADDR19 (1<<4)
-#define S3C2410_GPA5 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
-#define S3C2410_GPA5_OUT (0<<5)
#define S3C2410_GPA5_ADDR20 (1<<5)
-#define S3C2410_GPA6 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
-#define S3C2410_GPA6_OUT (0<<6)
#define S3C2410_GPA6_ADDR21 (1<<6)
-#define S3C2410_GPA7 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
-#define S3C2410_GPA7_OUT (0<<7)
#define S3C2410_GPA7_ADDR22 (1<<7)
-#define S3C2410_GPA8 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
-#define S3C2410_GPA8_OUT (0<<8)
#define S3C2410_GPA8_ADDR23 (1<<8)
-#define S3C2410_GPA9 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
-#define S3C2410_GPA9_OUT (0<<9)
#define S3C2410_GPA9_ADDR24 (1<<9)
-#define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
-#define S3C2410_GPA10_OUT (0<<10)
#define S3C2410_GPA10_ADDR25 (1<<10)
#define S3C2400_GPA10_SCKE (1<<10)
-#define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
-#define S3C2410_GPA11_OUT (0<<11)
#define S3C2410_GPA11_ADDR26 (1<<11)
#define S3C2400_GPA11_nCAS0 (1<<11)
-#define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
-#define S3C2410_GPA12_OUT (0<<12)
#define S3C2410_GPA12_nGCS1 (1<<12)
#define S3C2400_GPA12_nCAS1 (1<<12)
-#define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
-#define S3C2410_GPA13_OUT (0<<13)
#define S3C2410_GPA13_nGCS2 (1<<13)
#define S3C2400_GPA13_nGCS1 (1<<13)
-#define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
-#define S3C2410_GPA14_OUT (0<<14)
#define S3C2410_GPA14_nGCS3 (1<<14)
#define S3C2400_GPA14_nGCS2 (1<<14)
-#define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
-#define S3C2410_GPA15_OUT (0<<15)
#define S3C2410_GPA15_nGCS4 (1<<15)
#define S3C2400_GPA15_nGCS3 (1<<15)
-#define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
-#define S3C2410_GPA16_OUT (0<<16)
#define S3C2410_GPA16_nGCS5 (1<<16)
#define S3C2400_GPA16_nGCS4 (1<<16)
-#define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
-#define S3C2410_GPA17_OUT (0<<17)
#define S3C2410_GPA17_CLE (1<<17)
#define S3C2400_GPA17_nGCS5 (1<<17)
-#define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
-#define S3C2410_GPA18_OUT (0<<18)
#define S3C2410_GPA18_ALE (1<<18)
-#define S3C2410_GPA19 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
-#define S3C2410_GPA19_OUT (0<<19)
#define S3C2410_GPA19_nFWE (1<<19)
-#define S3C2410_GPA20 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
-#define S3C2410_GPA20_OUT (0<<20)
#define S3C2410_GPA20_nFRE (1<<20)
-#define S3C2410_GPA21 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
-#define S3C2410_GPA21_OUT (0<<21)
#define S3C2410_GPA21_nRSTOUT (1<<21)
-#define S3C2410_GPA22 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
-#define S3C2410_GPA22_OUT (0<<22)
#define S3C2410_GPA22_nFCE (1<<22)
/* 0x08 and 0x0c are reserved on S3C2410 */
@@ -194,107 +148,69 @@
/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
-#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
-#define S3C2410_GPB0_INP (0x00 << 0)
-#define S3C2410_GPB0_OUTP (0x01 << 0)
#define S3C2410_GPB0_TOUT0 (0x02 << 0)
#define S3C2400_GPB0_DATA16 (0x02 << 0)
-#define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
-#define S3C2410_GPB1_INP (0x00 << 2)
-#define S3C2410_GPB1_OUTP (0x01 << 2)
#define S3C2410_GPB1_TOUT1 (0x02 << 2)
#define S3C2400_GPB1_DATA17 (0x02 << 2)
-#define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
-#define S3C2410_GPB2_INP (0x00 << 4)
-#define S3C2410_GPB2_OUTP (0x01 << 4)
#define S3C2410_GPB2_TOUT2 (0x02 << 4)
#define S3C2400_GPB2_DATA18 (0x02 << 4)
#define S3C2400_GPB2_TCLK1 (0x03 << 4)
-#define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
-#define S3C2410_GPB3_INP (0x00 << 6)
-#define S3C2410_GPB3_OUTP (0x01 << 6)
#define S3C2410_GPB3_TOUT3 (0x02 << 6)
#define S3C2400_GPB3_DATA19 (0x02 << 6)
#define S3C2400_GPB3_TXD1 (0x03 << 6)
-#define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
-#define S3C2410_GPB4_INP (0x00 << 8)
-#define S3C2410_GPB4_OUTP (0x01 << 8)
#define S3C2410_GPB4_TCLK0 (0x02 << 8)
#define S3C2400_GPB4_DATA20 (0x02 << 8)
#define S3C2410_GPB4_MASK (0x03 << 8)
#define S3C2400_GPB4_RXD1 (0x03 << 8)
#define S3C2400_GPB4_MASK (0x03 << 8)
-#define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
-#define S3C2410_GPB5_INP (0x00 << 10)
-#define S3C2410_GPB5_OUTP (0x01 << 10)
#define S3C2410_GPB5_nXBACK (0x02 << 10)
#define S3C2443_GPB5_XBACK (0x03 << 10)
#define S3C2400_GPB5_DATA21 (0x02 << 10)
#define S3C2400_GPB5_nCTS1 (0x03 << 10)
-#define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
-#define S3C2410_GPB6_INP (0x00 << 12)
-#define S3C2410_GPB6_OUTP (0x01 << 12)
#define S3C2410_GPB6_nXBREQ (0x02 << 12)
#define S3C2443_GPB6_XBREQ (0x03 << 12)
#define S3C2400_GPB6_DATA22 (0x02 << 12)
#define S3C2400_GPB6_nRTS1 (0x03 << 12)
-#define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
-#define S3C2410_GPB7_INP (0x00 << 14)
-#define S3C2410_GPB7_OUTP (0x01 << 14)
#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
#define S3C2443_GPB7_XDACK1 (0x03 << 14)
#define S3C2400_GPB7_DATA23 (0x02 << 14)
-#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
-#define S3C2410_GPB8_INP (0x00 << 16)
-#define S3C2410_GPB8_OUTP (0x01 << 16)
#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
#define S3C2400_GPB8_DATA24 (0x02 << 16)
-#define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
-#define S3C2410_GPB9_INP (0x00 << 18)
-#define S3C2410_GPB9_OUTP (0x01 << 18)
#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
#define S3C2443_GPB9_XDACK0 (0x03 << 18)
#define S3C2400_GPB9_DATA25 (0x02 << 18)
#define S3C2400_GPB9_I2SSDI (0x03 << 18)
-#define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
-#define S3C2410_GPB10_INP (0x00 << 20)
-#define S3C2410_GPB10_OUTP (0x01 << 20)
#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
#define S3C2400_GPB10_DATA26 (0x02 << 20)
#define S3C2400_GPB10_nSS (0x03 << 20)
-#define S3C2400_GPB11 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
#define S3C2400_GPB11_INP (0x00 << 22)
#define S3C2400_GPB11_OUTP (0x01 << 22)
#define S3C2400_GPB11_DATA27 (0x02 << 22)
-#define S3C2400_GPB12 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
#define S3C2400_GPB12_INP (0x00 << 24)
#define S3C2400_GPB12_OUTP (0x01 << 24)
#define S3C2400_GPB12_DATA28 (0x02 << 24)
-#define S3C2400_GPB13 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
#define S3C2400_GPB13_INP (0x00 << 26)
#define S3C2400_GPB13_OUTP (0x01 << 26)
#define S3C2400_GPB13_DATA29 (0x02 << 26)
-#define S3C2400_GPB14 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
#define S3C2400_GPB14_INP (0x00 << 28)
#define S3C2400_GPB14_OUTP (0x01 << 28)
#define S3C2400_GPB14_DATA30 (0x02 << 28)
-#define S3C2400_GPB15 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
#define S3C2400_GPB15_INP (0x00 << 30)
#define S3C2400_GPB15_OUTP (0x01 << 30)
#define S3C2400_GPB15_DATA31 (0x02 << 30)
@@ -315,99 +231,51 @@
#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18)
#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C)
-#define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
-#define S3C2410_GPC0_INP (0x00 << 0)
-#define S3C2410_GPC0_OUTP (0x01 << 0)
#define S3C2410_GPC0_LEND (0x02 << 0)
#define S3C2400_GPC0_VD0 (0x02 << 0)
-#define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
-#define S3C2410_GPC1_INP (0x00 << 2)
-#define S3C2410_GPC1_OUTP (0x01 << 2)
#define S3C2410_GPC1_VCLK (0x02 << 2)
#define S3C2400_GPC1_VD1 (0x02 << 2)
-#define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
-#define S3C2410_GPC2_INP (0x00 << 4)
-#define S3C2410_GPC2_OUTP (0x01 << 4)
#define S3C2410_GPC2_VLINE (0x02 << 4)
#define S3C2400_GPC2_VD2 (0x02 << 4)
-#define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
-#define S3C2410_GPC3_INP (0x00 << 6)
-#define S3C2410_GPC3_OUTP (0x01 << 6)
#define S3C2410_GPC3_VFRAME (0x02 << 6)
#define S3C2400_GPC3_VD3 (0x02 << 6)
-#define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
-#define S3C2410_GPC4_INP (0x00 << 8)
-#define S3C2410_GPC4_OUTP (0x01 << 8)
#define S3C2410_GPC4_VM (0x02 << 8)
#define S3C2400_GPC4_VD4 (0x02 << 8)
-#define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
-#define S3C2410_GPC5_INP (0x00 << 10)
-#define S3C2410_GPC5_OUTP (0x01 << 10)
#define S3C2410_GPC5_LCDVF0 (0x02 << 10)
#define S3C2400_GPC5_VD5 (0x02 << 10)
-#define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
-#define S3C2410_GPC6_INP (0x00 << 12)
-#define S3C2410_GPC6_OUTP (0x01 << 12)
#define S3C2410_GPC6_LCDVF1 (0x02 << 12)
#define S3C2400_GPC6_VD6 (0x02 << 12)
-#define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
-#define S3C2410_GPC7_INP (0x00 << 14)
-#define S3C2410_GPC7_OUTP (0x01 << 14)
#define S3C2410_GPC7_LCDVF2 (0x02 << 14)
#define S3C2400_GPC7_VD7 (0x02 << 14)
-#define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
-#define S3C2410_GPC8_INP (0x00 << 16)
-#define S3C2410_GPC8_OUTP (0x01 << 16)
#define S3C2410_GPC8_VD0 (0x02 << 16)
#define S3C2400_GPC8_VD8 (0x02 << 16)
-#define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
-#define S3C2410_GPC9_INP (0x00 << 18)
-#define S3C2410_GPC9_OUTP (0x01 << 18)
#define S3C2410_GPC9_VD1 (0x02 << 18)
#define S3C2400_GPC9_VD9 (0x02 << 18)
-#define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
-#define S3C2410_GPC10_INP (0x00 << 20)
-#define S3C2410_GPC10_OUTP (0x01 << 20)
#define S3C2410_GPC10_VD2 (0x02 << 20)
#define S3C2400_GPC10_VD10 (0x02 << 20)
-#define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
-#define S3C2410_GPC11_INP (0x00 << 22)
-#define S3C2410_GPC11_OUTP (0x01 << 22)
#define S3C2410_GPC11_VD3 (0x02 << 22)
#define S3C2400_GPC11_VD11 (0x02 << 22)
-#define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
-#define S3C2410_GPC12_INP (0x00 << 24)
-#define S3C2410_GPC12_OUTP (0x01 << 24)
#define S3C2410_GPC12_VD4 (0x02 << 24)
#define S3C2400_GPC12_VD12 (0x02 << 24)
-#define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
-#define S3C2410_GPC13_INP (0x00 << 26)
-#define S3C2410_GPC13_OUTP (0x01 << 26)
#define S3C2410_GPC13_VD5 (0x02 << 26)
#define S3C2400_GPC13_VD13 (0x02 << 26)
-#define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
-#define S3C2410_GPC14_INP (0x00 << 28)
-#define S3C2410_GPC14_OUTP (0x01 << 28)
#define S3C2410_GPC14_VD6 (0x02 << 28)
#define S3C2400_GPC14_VD14 (0x02 << 28)
-#define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
-#define S3C2410_GPC15_INP (0x00 << 30)
-#define S3C2410_GPC15_OUTP (0x01 << 30)
#define S3C2410_GPC15_VD7 (0x02 << 30)
#define S3C2400_GPC15_VD15 (0x02 << 30)
@@ -432,99 +300,51 @@
#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24)
#define S3C2400_GPDUP S3C2410_GPIOREG(0x28)
-#define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
-#define S3C2410_GPD0_INP (0x00 << 0)
-#define S3C2410_GPD0_OUTP (0x01 << 0)
#define S3C2410_GPD0_VD8 (0x02 << 0)
#define S3C2400_GPD0_VFRAME (0x02 << 0)
#define S3C2442_GPD0_nSPICS1 (0x03 << 0)
-#define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
-#define S3C2410_GPD1_INP (0x00 << 2)
-#define S3C2410_GPD1_OUTP (0x01 << 2)
#define S3C2410_GPD1_VD9 (0x02 << 2)
#define S3C2400_GPD1_VM (0x02 << 2)
#define S3C2442_GPD1_SPICLK1 (0x03 << 2)
-#define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
-#define S3C2410_GPD2_INP (0x00 << 4)
-#define S3C2410_GPD2_OUTP (0x01 << 4)
#define S3C2410_GPD2_VD10 (0x02 << 4)
#define S3C2400_GPD2_VLINE (0x02 << 4)
-#define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
-#define S3C2410_GPD3_INP (0x00 << 6)
-#define S3C2410_GPD3_OUTP (0x01 << 6)
#define S3C2410_GPD3_VD11 (0x02 << 6)
#define S3C2400_GPD3_VCLK (0x02 << 6)
-#define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
-#define S3C2410_GPD4_INP (0x00 << 8)
-#define S3C2410_GPD4_OUTP (0x01 << 8)
#define S3C2410_GPD4_VD12 (0x02 << 8)
#define S3C2400_GPD4_LEND (0x02 << 8)
-#define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
-#define S3C2410_GPD5_INP (0x00 << 10)
-#define S3C2410_GPD5_OUTP (0x01 << 10)
#define S3C2410_GPD5_VD13 (0x02 << 10)
#define S3C2400_GPD5_TOUT0 (0x02 << 10)
-#define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
-#define S3C2410_GPD6_INP (0x00 << 12)
-#define S3C2410_GPD6_OUTP (0x01 << 12)
#define S3C2410_GPD6_VD14 (0x02 << 12)
#define S3C2400_GPD6_TOUT1 (0x02 << 12)
-#define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
-#define S3C2410_GPD7_INP (0x00 << 14)
-#define S3C2410_GPD7_OUTP (0x01 << 14)
#define S3C2410_GPD7_VD15 (0x02 << 14)
#define S3C2400_GPD7_TOUT2 (0x02 << 14)
-#define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
-#define S3C2410_GPD8_INP (0x00 << 16)
-#define S3C2410_GPD8_OUTP (0x01 << 16)
#define S3C2410_GPD8_VD16 (0x02 << 16)
#define S3C2400_GPD8_TOUT3 (0x02 << 16)
-#define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
-#define S3C2410_GPD9_INP (0x00 << 18)
-#define S3C2410_GPD9_OUTP (0x01 << 18)
#define S3C2410_GPD9_VD17 (0x02 << 18)
#define S3C2400_GPD9_TCLK0 (0x02 << 18)
#define S3C2410_GPD9_MASK (0x03 << 18)
-#define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
-#define S3C2410_GPD10_INP (0x00 << 20)
-#define S3C2410_GPD10_OUTP (0x01 << 20)
#define S3C2410_GPD10_VD18 (0x02 << 20)
#define S3C2400_GPD10_nWAIT (0x02 << 20)
-#define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
-#define S3C2410_GPD11_INP (0x00 << 22)
-#define S3C2410_GPD11_OUTP (0x01 << 22)
#define S3C2410_GPD11_VD19 (0x02 << 22)
-#define S3C2410_GPD12 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
-#define S3C2410_GPD12_INP (0x00 << 24)
-#define S3C2410_GPD12_OUTP (0x01 << 24)
#define S3C2410_GPD12_VD20 (0x02 << 24)
-#define S3C2410_GPD13 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
-#define S3C2410_GPD13_INP (0x00 << 26)
-#define S3C2410_GPD13_OUTP (0x01 << 26)
#define S3C2410_GPD13_VD21 (0x02 << 26)
-#define S3C2410_GPD14 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
-#define S3C2410_GPD14_INP (0x00 << 28)
-#define S3C2410_GPD14_OUTP (0x01 << 28)
#define S3C2410_GPD14_VD22 (0x02 << 28)
#define S3C2410_GPD14_nSS1 (0x03 << 28)
-#define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
-#define S3C2410_GPD15_INP (0x00 << 30)
-#define S3C2410_GPD15_OUTP (0x01 << 30)
#define S3C2410_GPD15_VD23 (0x02 << 30)
#define S3C2410_GPD15_nSS0 (0x03 << 30)
@@ -550,34 +370,22 @@
#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30)
#define S3C2400_GPEUP S3C2410_GPIOREG(0x34)
-#define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
-#define S3C2410_GPE0_INP (0x00 << 0)
-#define S3C2410_GPE0_OUTP (0x01 << 0)
#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
#define S3C2400_GPE0_EINT0 (0x02 << 0)
#define S3C2410_GPE0_MASK (0x03 << 0)
-#define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
-#define S3C2410_GPE1_INP (0x00 << 2)
-#define S3C2410_GPE1_OUTP (0x01 << 2)
#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
#define S3C2443_GPE1_AC_SYNC (0x03 << 2)
#define S3C2400_GPE1_EINT1 (0x02 << 2)
#define S3C2400_GPE1_nSS (0x03 << 2)
#define S3C2410_GPE1_MASK (0x03 << 2)
-#define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
-#define S3C2410_GPE2_INP (0x00 << 4)
-#define S3C2410_GPE2_OUTP (0x01 << 4)
#define S3C2410_GPE2_CDCLK (0x02 << 4)
#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
#define S3C2400_GPE2_EINT2 (0x02 << 4)
#define S3C2400_GPE2_I2SSDI (0x03 << 4)
-#define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
-#define S3C2410_GPE3_INP (0x00 << 6)
-#define S3C2410_GPE3_OUTP (0x01 << 6)
#define S3C2410_GPE3_I2SSDI (0x02 << 6)
#define S3C2443_GPE3_AC_SDI (0x03 << 6)
#define S3C2400_GPE3_EINT3 (0x02 << 6)
@@ -585,9 +393,6 @@
#define S3C2410_GPE3_nSS0 (0x03 << 6)
#define S3C2410_GPE3_MASK (0x03 << 6)
-#define S3C2410_GPE4 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
-#define S3C2410_GPE4_INP (0x00 << 8)
-#define S3C2410_GPE4_OUTP (0x01 << 8)
#define S3C2410_GPE4_I2SSDO (0x02 << 8)
#define S3C2443_GPE4_AC_SDO (0x03 << 8)
#define S3C2400_GPE4_EINT4 (0x02 << 8)
@@ -595,81 +400,48 @@
#define S3C2410_GPE4_I2SSDI (0x03 << 8)
#define S3C2410_GPE4_MASK (0x03 << 8)
-#define S3C2410_GPE5 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
-#define S3C2410_GPE5_INP (0x00 << 10)
-#define S3C2410_GPE5_OUTP (0x01 << 10)
#define S3C2410_GPE5_SDCLK (0x02 << 10)
#define S3C2443_GPE5_SD1_CLK (0x02 << 10)
#define S3C2400_GPE5_EINT5 (0x02 << 10)
#define S3C2400_GPE5_TCLK1 (0x03 << 10)
-#define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
-#define S3C2410_GPE6_INP (0x00 << 12)
-#define S3C2410_GPE6_OUTP (0x01 << 12)
#define S3C2410_GPE6_SDCMD (0x02 << 12)
#define S3C2443_GPE6_SD1_CMD (0x02 << 12)
#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
#define S3C2400_GPE6_EINT6 (0x02 << 12)
-#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
-#define S3C2410_GPE7_INP (0x00 << 14)
-#define S3C2410_GPE7_OUTP (0x01 << 14)
#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14)
#define S3C2443_GPE7_AC_SDI (0x03 << 14)
#define S3C2400_GPE7_EINT7 (0x02 << 14)
-#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
-#define S3C2410_GPE8_INP (0x00 << 16)
-#define S3C2410_GPE8_OUTP (0x01 << 16)
#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16)
#define S3C2443_GPE8_AC_SDO (0x03 << 16)
#define S3C2400_GPE8_nXDACK0 (0x02 << 16)
-#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
-#define S3C2410_GPE9_INP (0x00 << 18)
-#define S3C2410_GPE9_OUTP (0x01 << 18)
#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18)
#define S3C2443_GPE9_AC_SYNC (0x03 << 18)
#define S3C2400_GPE9_nXDACK1 (0x02 << 18)
#define S3C2400_GPE9_nXBACK (0x03 << 18)
-#define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
-#define S3C2410_GPE10_INP (0x00 << 20)
-#define S3C2410_GPE10_OUTP (0x01 << 20)
#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
#define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
-#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
-#define S3C2410_GPE11_INP (0x00 << 22)
-#define S3C2410_GPE11_OUTP (0x01 << 22)
#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
#define S3C2400_GPE11_nXDREQ1 (0x02 << 22)
#define S3C2400_GPE11_nXBREQ (0x03 << 22)
-#define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
-#define S3C2410_GPE12_INP (0x00 << 24)
-#define S3C2410_GPE12_OUTP (0x01 << 24)
#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
-#define S3C2410_GPE13 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
-#define S3C2410_GPE13_INP (0x00 << 26)
-#define S3C2410_GPE13_OUTP (0x01 << 26)
#define S3C2410_GPE13_SPICLK0 (0x02 << 26)
-#define S3C2410_GPE14 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
-#define S3C2410_GPE14_INP (0x00 << 28)
-#define S3C2410_GPE14_OUTP (0x01 << 28)
#define S3C2410_GPE14_IICSCL (0x02 << 28)
#define S3C2410_GPE14_MASK (0x03 << 28)
-#define S3C2410_GPE15 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
-#define S3C2410_GPE15_INP (0x00 << 30)
-#define S3C2410_GPE15_OUTP (0x01 << 30)
#define S3C2410_GPE15_IICSDA (0x02 << 30)
#define S3C2410_GPE15_MASK (0x03 << 30)
@@ -705,55 +477,31 @@
#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C)
#define S3C2400_GPFUP S3C2410_GPIOREG(0x40)
-#define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
-#define S3C2410_GPF0_INP (0x00 << 0)
-#define S3C2410_GPF0_OUTP (0x01 << 0)
#define S3C2410_GPF0_EINT0 (0x02 << 0)
#define S3C2400_GPF0_RXD0 (0x02 << 0)
-#define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
-#define S3C2410_GPF1_INP (0x00 << 2)
-#define S3C2410_GPF1_OUTP (0x01 << 2)
#define S3C2410_GPF1_EINT1 (0x02 << 2)
#define S3C2400_GPF1_RXD1 (0x02 << 2)
#define S3C2400_GPF1_IICSDA (0x03 << 2)
-#define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
-#define S3C2410_GPF2_INP (0x00 << 4)
-#define S3C2410_GPF2_OUTP (0x01 << 4)
#define S3C2410_GPF2_EINT2 (0x02 << 4)
#define S3C2400_GPF2_TXD0 (0x02 << 4)
-#define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
-#define S3C2410_GPF3_INP (0x00 << 6)
-#define S3C2410_GPF3_OUTP (0x01 << 6)
#define S3C2410_GPF3_EINT3 (0x02 << 6)
#define S3C2400_GPF3_TXD1 (0x02 << 6)
#define S3C2400_GPF3_IICSCL (0x03 << 6)
-#define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
-#define S3C2410_GPF4_INP (0x00 << 8)
-#define S3C2410_GPF4_OUTP (0x01 << 8)
#define S3C2410_GPF4_EINT4 (0x02 << 8)
#define S3C2400_GPF4_nRTS0 (0x02 << 8)
#define S3C2400_GPF4_nXBACK (0x03 << 8)
-#define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
-#define S3C2410_GPF5_INP (0x00 << 10)
-#define S3C2410_GPF5_OUTP (0x01 << 10)
#define S3C2410_GPF5_EINT5 (0x02 << 10)
#define S3C2400_GPF5_nCTS0 (0x02 << 10)
#define S3C2400_GPF5_nXBREQ (0x03 << 10)
-#define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
-#define S3C2410_GPF6_INP (0x00 << 12)
-#define S3C2410_GPF6_OUTP (0x01 << 12)
#define S3C2410_GPF6_EINT6 (0x02 << 12)
#define S3C2400_GPF6_CLKOUT (0x02 << 12)
-#define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
-#define S3C2410_GPF7_INP (0x00 << 14)
-#define S3C2410_GPF7_OUTP (0x01 << 14)
#define S3C2410_GPF7_EINT7 (0x02 << 14)
#define S3C2410_GPF_PUPDIS(x) (1<<(x))
@@ -778,117 +526,69 @@
#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48)
#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C)
-#define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
-#define S3C2410_GPG0_INP (0x00 << 0)
-#define S3C2410_GPG0_OUTP (0x01 << 0)
#define S3C2410_GPG0_EINT8 (0x02 << 0)
#define S3C2400_GPG0_I2SLRCK (0x02 << 0)
-#define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
-#define S3C2410_GPG1_INP (0x00 << 2)
-#define S3C2410_GPG1_OUTP (0x01 << 2)
#define S3C2410_GPG1_EINT9 (0x02 << 2)
#define S3C2400_GPG1_I2SSCLK (0x02 << 2)
-#define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
-#define S3C2410_GPG2_INP (0x00 << 4)
-#define S3C2410_GPG2_OUTP (0x01 << 4)
#define S3C2410_GPG2_EINT10 (0x02 << 4)
#define S3C2410_GPG2_nSS0 (0x03 << 4)
#define S3C2400_GPG2_CDCLK (0x02 << 4)
-#define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
-#define S3C2410_GPG3_INP (0x00 << 6)
-#define S3C2410_GPG3_OUTP (0x01 << 6)
#define S3C2410_GPG3_EINT11 (0x02 << 6)
#define S3C2410_GPG3_nSS1 (0x03 << 6)
#define S3C2400_GPG3_I2SSDO (0x02 << 6)
#define S3C2400_GPG3_I2SSDI (0x03 << 6)
-#define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
-#define S3C2410_GPG4_INP (0x00 << 8)
-#define S3C2410_GPG4_OUTP (0x01 << 8)
#define S3C2410_GPG4_EINT12 (0x02 << 8)
#define S3C2400_GPG4_MMCCLK (0x02 << 8)
#define S3C2400_GPG4_I2SSDI (0x03 << 8)
#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
-#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
-#define S3C2410_GPG5_INP (0x00 << 10)
-#define S3C2410_GPG5_OUTP (0x01 << 10)
#define S3C2410_GPG5_EINT13 (0x02 << 10)
#define S3C2400_GPG5_MMCCMD (0x02 << 10)
#define S3C2400_GPG5_IICSDA (0x03 << 10)
#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */
-#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
-#define S3C2410_GPG6_INP (0x00 << 12)
-#define S3C2410_GPG6_OUTP (0x01 << 12)
#define S3C2410_GPG6_EINT14 (0x02 << 12)
#define S3C2400_GPG6_MMCDAT (0x02 << 12)
#define S3C2400_GPG6_IICSCL (0x03 << 12)
#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
-#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
-#define S3C2410_GPG7_INP (0x00 << 14)
-#define S3C2410_GPG7_OUTP (0x01 << 14)
#define S3C2410_GPG7_EINT15 (0x02 << 14)
#define S3C2410_GPG7_SPICLK1 (0x03 << 14)
#define S3C2400_GPG7_SPIMISO (0x02 << 14)
#define S3C2400_GPG7_IICSDA (0x03 << 14)
-#define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
-#define S3C2410_GPG8_INP (0x00 << 16)
-#define S3C2410_GPG8_OUTP (0x01 << 16)
#define S3C2410_GPG8_EINT16 (0x02 << 16)
#define S3C2400_GPG8_SPIMOSI (0x02 << 16)
#define S3C2400_GPG8_IICSCL (0x03 << 16)
-#define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
-#define S3C2410_GPG9_INP (0x00 << 18)
-#define S3C2410_GPG9_OUTP (0x01 << 18)
#define S3C2410_GPG9_EINT17 (0x02 << 18)
#define S3C2400_GPG9_SPICLK (0x02 << 18)
#define S3C2400_GPG9_MMCCLK (0x03 << 18)
-#define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
-#define S3C2410_GPG10_INP (0x00 << 20)
-#define S3C2410_GPG10_OUTP (0x01 << 20)
#define S3C2410_GPG10_EINT18 (0x02 << 20)
-#define S3C2410_GPG11 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
-#define S3C2410_GPG11_INP (0x00 << 22)
-#define S3C2410_GPG11_OUTP (0x01 << 22)
#define S3C2410_GPG11_EINT19 (0x02 << 22)
#define S3C2410_GPG11_TCLK1 (0x03 << 22)
#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
-#define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
-#define S3C2410_GPG12_INP (0x00 << 24)
-#define S3C2410_GPG12_OUTP (0x01 << 24)
#define S3C2410_GPG12_EINT20 (0x02 << 24)
#define S3C2410_GPG12_XMON (0x03 << 24)
#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
#define S3C2443_GPG12_nINPACK (0x03 << 24)
-#define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
-#define S3C2410_GPG13_INP (0x00 << 26)
-#define S3C2410_GPG13_OUTP (0x01 << 26)
#define S3C2410_GPG13_EINT21 (0x02 << 26)
#define S3C2410_GPG13_nXPON (0x03 << 26)
#define S3C2443_GPG13_CF_nREG (0x03 << 26)
-#define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
-#define S3C2410_GPG14_INP (0x00 << 28)
-#define S3C2410_GPG14_OUTP (0x01 << 28)
#define S3C2410_GPG14_EINT22 (0x02 << 28)
#define S3C2410_GPG14_YMON (0x03 << 28)
#define S3C2443_GPG14_CF_RESET (0x03 << 28)
-#define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
-#define S3C2410_GPG15_INP (0x00 << 30)
-#define S3C2410_GPG15_OUTP (0x01 << 30)
#define S3C2410_GPG15_EINT23 (0x02 << 30)
#define S3C2410_GPG15_nYPON (0x03 << 30)
#define S3C2443_GPG15_CF_PWR (0x03 << 30)
@@ -907,62 +607,29 @@
#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74)
#define S3C2410_GPHUP S3C2410_GPIOREG(0x78)
-#define S3C2410_GPH0 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
-#define S3C2410_GPH0_INP (0x00 << 0)
-#define S3C2410_GPH0_OUTP (0x01 << 0)
#define S3C2410_GPH0_nCTS0 (0x02 << 0)
-#define S3C2410_GPH1 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
-#define S3C2410_GPH1_INP (0x00 << 2)
-#define S3C2410_GPH1_OUTP (0x01 << 2)
#define S3C2410_GPH1_nRTS0 (0x02 << 2)
-#define S3C2410_GPH2 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
-#define S3C2410_GPH2_INP (0x00 << 4)
-#define S3C2410_GPH2_OUTP (0x01 << 4)
#define S3C2410_GPH2_TXD0 (0x02 << 4)
-#define S3C2410_GPH3 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
-#define S3C2410_GPH3_INP (0x00 << 6)
-#define S3C2410_GPH3_OUTP (0x01 << 6)
#define S3C2410_GPH3_RXD0 (0x02 << 6)
-#define S3C2410_GPH4 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
-#define S3C2410_GPH4_INP (0x00 << 8)
-#define S3C2410_GPH4_OUTP (0x01 << 8)
#define S3C2410_GPH4_TXD1 (0x02 << 8)
-#define S3C2410_GPH5 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
-#define S3C2410_GPH5_INP (0x00 << 10)
-#define S3C2410_GPH5_OUTP (0x01 << 10)
#define S3C2410_GPH5_RXD1 (0x02 << 10)
-#define S3C2410_GPH6 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
-#define S3C2410_GPH6_INP (0x00 << 12)
-#define S3C2410_GPH6_OUTP (0x01 << 12)
#define S3C2410_GPH6_TXD2 (0x02 << 12)
#define S3C2410_GPH6_nRTS1 (0x03 << 12)
-#define S3C2410_GPH7 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
-#define S3C2410_GPH7_INP (0x00 << 14)
-#define S3C2410_GPH7_OUTP (0x01 << 14)
#define S3C2410_GPH7_RXD2 (0x02 << 14)
#define S3C2410_GPH7_nCTS1 (0x03 << 14)
-#define S3C2410_GPH8 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
-#define S3C2410_GPH8_INP (0x00 << 16)
-#define S3C2410_GPH8_OUTP (0x01 << 16)
#define S3C2410_GPH8_UCLK (0x02 << 16)
-#define S3C2410_GPH9 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
-#define S3C2410_GPH9_INP (0x00 << 18)
-#define S3C2410_GPH9_OUTP (0x01 << 18)
#define S3C2410_GPH9_CLKOUT0 (0x02 << 18)
#define S3C2442_GPH9_nSPICS0 (0x03 << 18)
-#define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
-#define S3C2410_GPH10_INP (0x00 << 20)
-#define S3C2410_GPH10_OUTP (0x01 << 20)
#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
/* The S3C2412 and S3C2413 move the GPJ register set to after
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
index b8687f7..6faadce 100644
--- a/arch/arm/mach-s3c2410/include/mach/system-reset.h
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -11,21 +11,13 @@
*/
#include <mach/hardware.h>
-#include <linux/io.h>
-
-#include <plat/regs-watchdog.h>
-#include <mach/regs-clock.h>
-
-#include <linux/clk.h>
-#include <linux/err.h>
+#include <plat/watchdog-reset.h>
extern void (*s3c24xx_reset_hook)(void);
static void
arch_reset(char mode, const char *cmd)
{
- struct clk *wdtclk;
-
if (mode == 's') {
cpu_reset(0);
}
@@ -33,31 +25,7 @@ arch_reset(char mode, const char *cmd)
if (s3c24xx_reset_hook)
s3c24xx_reset_hook();
- printk("arch_reset: attempting watchdog reset\n");
-
- __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
-
- wdtclk = clk_get(NULL, "watchdog");
- if (!IS_ERR(wdtclk)) {
- clk_enable(wdtclk);
- } else
- printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
-
- /* put initial values into count and data */
- __raw_writel(0x80, S3C2410_WTCNT);
- __raw_writel(0x80, S3C2410_WTDAT);
-
- /* set the watchdog to go and reset... */
- __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
- S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
-
- /* wait for reset to assert... */
- mdelay(500);
-
- printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
- /* delay to allow the serial port to show the message */
- mdelay(50);
+ arch_wdt_reset();
/* we'll take a jump through zero as a poor second */
cpu_reset(0);
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 6d6995a..06a84ad 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -32,6 +32,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/proc_fs.h>
@@ -224,8 +225,8 @@ static void amlm5900_init_pm(void)
} else {
enable_irq_wake(IRQ_EINT9);
/* configure the suspend/resume status pin */
- s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP);
- s3c2410_gpio_pullup(S3C2410_GPF2, 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_pullup(S3C2410_GPF(2), 0);
}
}
static void __init amlm5900_init(void)
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 8637dea..ce3baba2 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
@@ -212,15 +213,15 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
{
/* ensure that an nRESET is not generated on resume. */
- s3c2410_gpio_setpin(S3C2410_GPA21, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+ s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
return 0;
}
static int bast_pm_resume(struct sys_device *sd)
{
- s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
return 0;
}
@@ -591,8 +592,6 @@ static void __init bast_map_io(void)
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
-
- usb_simtec_init();
}
static void __init bast_init(void)
@@ -607,6 +606,7 @@ static void __init bast_init(void)
i2c_register_board_info(0, bast_i2c_devs,
ARRAY_SIZE(bast_i2c_devs));
+ usb_simtec_init();
nor_simtec_init();
}
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 7a7c4da..d9cd5dd 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -127,7 +127,7 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
.udc_command = h1940_udc_pullup,
- .vbus_pin = S3C2410_GPG5,
+ .vbus_pin = S3C2410_GPG(5),
.vbus_pin_inverted = 1,
};
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 2b83f87..0f6ed61 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -19,6 +19,7 @@
#include <linux/gpio_keys.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
@@ -85,10 +86,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
{
switch (cmd) {
case S3C2410_UDC_P_ENABLE :
- s3c2410_gpio_setpin(S3C2410_GPB3, 1);
+ s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
break;
case S3C2410_UDC_P_DISABLE :
- s3c2410_gpio_setpin(S3C2410_GPB3, 0);
+ s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
break;
case S3C2410_UDC_P_RESET :
break;
@@ -99,55 +100,55 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
.udc_command = n30_udc_pullup,
- .vbus_pin = S3C2410_GPG1,
+ .vbus_pin = S3C2410_GPG(1),
.vbus_pin_inverted = 0,
};
static struct gpio_keys_button n30_buttons[] = {
{
- .gpio = S3C2410_GPF0,
+ .gpio = S3C2410_GPF(0),
.code = KEY_POWER,
.desc = "Power",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG9,
+ .gpio = S3C2410_GPG(9),
.code = KEY_UP,
.desc = "Thumbwheel Up",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG8,
+ .gpio = S3C2410_GPG(8),
.code = KEY_DOWN,
.desc = "Thumbwheel Down",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG7,
+ .gpio = S3C2410_GPG(7),
.code = KEY_ENTER,
.desc = "Thumbwheel Press",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF7,
+ .gpio = S3C2410_GPF(7),
.code = KEY_HOMEPAGE,
.desc = "Home",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF6,
+ .gpio = S3C2410_GPF(6),
.code = KEY_CALENDAR,
.desc = "Calendar",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF5,
+ .gpio = S3C2410_GPF(5),
.code = KEY_ADDRESSBOOK,
.desc = "Contacts",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF4,
+ .gpio = S3C2410_GPF(4),
.code = KEY_MAIL,
.desc = "Mail",
.active_low = 0,
@@ -169,73 +170,73 @@ static struct platform_device n30_button_device = {
static struct gpio_keys_button n35_buttons[] = {
{
- .gpio = S3C2410_GPF0,
+ .gpio = S3C2410_GPF(0),
.code = KEY_POWER,
.desc = "Power",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG9,
+ .gpio = S3C2410_GPG(9),
.code = KEY_UP,
.desc = "Joystick Up",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG8,
+ .gpio = S3C2410_GPG(8),
.code = KEY_DOWN,
.desc = "Joystick Down",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG6,
+ .gpio = S3C2410_GPG(6),
.code = KEY_DOWN,
.desc = "Joystick Left",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG5,
+ .gpio = S3C2410_GPG(5),
.code = KEY_DOWN,
.desc = "Joystick Right",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG7,
+ .gpio = S3C2410_GPG(7),
.code = KEY_ENTER,
.desc = "Joystick Press",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF7,
+ .gpio = S3C2410_GPF(7),
.code = KEY_HOMEPAGE,
.desc = "Home",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF6,
+ .gpio = S3C2410_GPF(6),
.code = KEY_CALENDAR,
.desc = "Calendar",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF5,
+ .gpio = S3C2410_GPF(5),
.code = KEY_ADDRESSBOOK,
.desc = "Contacts",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF4,
+ .gpio = S3C2410_GPF(4),
.code = KEY_MAIL,
.desc = "Mail",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF3,
+ .gpio = S3C2410_GPF(3),
.code = SW_RADIO,
.desc = "GPS Antenna",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG2,
+ .gpio = S3C2410_GPG(2),
.code = SW_HEADPHONE_INSERT,
.desc = "Headphone",
.active_low = 0,
@@ -259,7 +260,7 @@ static struct platform_device n35_button_device = {
/* This is the bluetooth LED on the device. */
static struct s3c24xx_led_platdata n30_blue_led_pdata = {
.name = "blue_led",
- .gpio = S3C2410_GPG6,
+ .gpio = S3C2410_GPG(6),
.def_trigger = "",
};
@@ -270,7 +271,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = {
static struct s3c24xx_led_platdata n30_warning_led_pdata = {
.name = "warning_led",
.flags = S3C24XX_LEDF_ACTLOW,
- .gpio = S3C2410_GPD9,
+ .gpio = S3C2410_GPD(9),
.def_trigger = "",
};
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 9f1ba9b..2cc9849 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -27,6 +27,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
@@ -198,7 +199,7 @@ static struct platform_device qt2410_cs89x0 = {
/* LED */
static struct s3c24xx_led_platdata qt2410_pdata_led = {
- .gpio = S3C2410_GPB0,
+ .gpio = S3C2410_GPB(0),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led",
.def_trigger = "timer",
@@ -218,18 +219,18 @@ static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
{
switch (cs) {
case BITBANG_CS_ACTIVE:
- s3c2410_gpio_setpin(S3C2410_GPB5, 0);
+ s3c2410_gpio_setpin(S3C2410_GPB(5), 0);
break;
case BITBANG_CS_INACTIVE:
- s3c2410_gpio_setpin(S3C2410_GPB5, 1);
+ s3c2410_gpio_setpin(S3C2410_GPB(5), 1);
break;
}
}
static struct s3c2410_spigpio_info spi_gpio_cfg = {
- .pin_clk = S3C2410_GPG7,
- .pin_mosi = S3C2410_GPG6,
- .pin_miso = S3C2410_GPG5,
+ .pin_clk = S3C2410_GPG(7),
+ .pin_mosi = S3C2410_GPG(6),
+ .pin_miso = S3C2410_GPG(5),
.chip_select = &spi_gpio_cs,
};
@@ -346,13 +347,13 @@ static void __init qt2410_machine_init(void)
}
s3c24xx_fb_set_platdata(&qt2410_fb_info);
- s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPB0, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
s3c_i2c0_set_platdata(NULL);
- s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT);
platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
s3c_pm_init();
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 61a1ea9..1628cc7 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -18,6 +18,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/dm9000.h>
#include <linux/i2c.h>
@@ -277,19 +278,19 @@ static struct platform_device vr1000_dm9k1 = {
static struct s3c24xx_led_platdata vr1000_led1_pdata = {
.name = "led1",
- .gpio = S3C2410_GPB0,
+ .gpio = S3C2410_GPB(0),
.def_trigger = "",
};
static struct s3c24xx_led_platdata vr1000_led2_pdata = {
.name = "led2",
- .gpio = S3C2410_GPB1,
+ .gpio = S3C2410_GPB(1),
.def_trigger = "",
};
static struct s3c24xx_led_platdata vr1000_led3_pdata = {
.name = "led3",
- .gpio = S3C2410_GPB2,
+ .gpio = S3C2410_GPB(2),
.def_trigger = "",
};
@@ -355,8 +356,8 @@ static struct clk *vr1000_clocks[] __initdata = {
static void vr1000_power_off(void)
{
- s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_OUTP);
- s3c2410_gpio_setpin(S3C2410_GPB9, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPB(9), 1);
}
static void __init vr1000_map_io(void)
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 87fc481..143e08a 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -25,6 +25,7 @@
#include <linux/errno.h>
#include <linux/time.h>
#include <linux/sysdev.h>
+#include <linux/gpio.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -76,7 +77,7 @@ static void s3c2410_pm_prepare(void)
}
if ( machine_is_aml_m5900() )
- s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
}
@@ -91,7 +92,7 @@ static int s3c2410_pm_resume(struct sys_device *dev)
__raw_writel(tmp, S3C2410_GSTATUS2);
if ( machine_is_aml_m5900() )
- s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
return 0;
}
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 8331e8d..6cd9377 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -18,9 +18,11 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
+#include <linux/gpio.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/gpio.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
@@ -29,7 +31,6 @@
#include <mach/bast-map.h>
#include <mach/bast-irq.h>
-#include <mach/regs-gpio.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -53,9 +54,9 @@ usb_simtec_powercontrol(int port, int to)
power_state[port] = to;
if (power_state[0] && power_state[1])
- s3c2410_gpio_setpin(S3C2410_GPB4, 0);
+ gpio_set_value(S3C2410_GPB(4), 0);
else
- s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+ gpio_set_value(S3C2410_GPB(4), 1);
}
static irqreturn_t
@@ -63,7 +64,7 @@ usb_simtec_ocirq(int irq, void *pw)
{
struct s3c2410_hcd_info *info = pw;
- if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
+ if (gpio_get_value(S3C2410_GPG(10)) == 0) {
pr_debug("usb_simtec: over-current irq (oc detected)\n");
s3c2410_usb_report_oc(info, 3);
} else {
@@ -106,10 +107,27 @@ static struct s3c2410_hcd_info usb_simtec_info = {
int usb_simtec_init(void)
{
+ int ret;
+
printk("USB Power Control, (c) 2004 Simtec Electronics\n");
- s3c_device_usb.dev.platform_data = &usb_simtec_info;
- s3c2410_gpio_cfgpin(S3C2410_GPB4, S3C2410_GPB4_OUTP);
- s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+ ret = gpio_request(S3C2410_GPB(4), "USB power control");
+ if (ret < 0) {
+ pr_err("%s: failed to get GPB4\n", __func__);
+ return ret;
+ }
+
+ ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
+ if (ret < 0) {
+ pr_err("%s: failed to get GPG10\n", __func__);
+ gpio_free(S3C2410_GPB(4));
+ return ret;
+ }
+
+ /* turn power on */
+ gpio_direction_output(S3C2410_GPB(4), 1);
+ gpio_direction_input(S3C2410_GPG(10));
+
+ s3c_device_usb.dev.platform_data = &usb_simtec_info;
return 0;
}
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index ca99564..63586ff 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -38,6 +38,7 @@ menu "S3C2412 Machines"
config MACH_JIVE
bool "Logitech Jive"
select CPU_S3C2412
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Logitech Jive.
@@ -50,6 +51,7 @@ config MACH_SMDK2413
select CPU_S3C2412
select MACH_S3C2413
select MACH_SMDK
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using an SMDK2413
@@ -72,6 +74,7 @@ config MACH_SMDK2412
config MACH_VSTMS
bool "VMSTMS"
select CPU_S3C2412
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using an VSTMS board
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 9e34785..f8d16fc 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -20,12 +20,13 @@
#include <mach/dma.h>
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 8f0d37d..8df506e 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
@@ -356,8 +357,8 @@ static void jive_lcm_reset(unsigned int set)
{
printk(KERN_DEBUG "%s(%d)\n", __func__, set);
- s3c2410_gpio_setpin(S3C2410_GPG13, set);
- s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPG(13), set);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
}
#undef LCD_UPPER_MARGIN
@@ -390,13 +391,13 @@ static struct ili9320_platdata jive_lcm_config = {
static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
{
- s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1);
+ s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1);
}
static struct s3c2410_spigpio_info jive_lcd_spi = {
.bus_num = 1,
- .pin_clk = S3C2410_GPG8,
- .pin_mosi = S3C2410_GPB8,
+ .pin_clk = S3C2410_GPG(8),
+ .pin_mosi = S3C2410_GPB(8),
.num_chipselect = 1,
.chip_select = jive_lcd_spi_chipselect,
};
@@ -412,13 +413,13 @@ static struct platform_device jive_device_lcdspi = {
static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
{
- s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1);
+ s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1);
}
static struct s3c2410_spigpio_info jive_wm8750_spi = {
.bus_num = 2,
- .pin_clk = S3C2410_GPB4,
- .pin_mosi = S3C2410_GPB9,
+ .pin_clk = S3C2410_GPB(4),
+ .pin_mosi = S3C2410_GPB(9),
.num_chipselect = 1,
.chip_select = jive_wm8750_chipselect,
};
@@ -479,7 +480,7 @@ static struct platform_device *jive_devices[] __initdata = {
};
static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
- .vbus_pin = S3C2410_GPG1, /* detect is on GPG1 */
+ .vbus_pin = S3C2410_GPG(1), /* detect is on GPG1 */
};
/* Jive power management device */
@@ -529,8 +530,8 @@ static void jive_power_off(void)
{
printk(KERN_INFO "powering system down...\n");
- s3c2410_gpio_setpin(S3C2410_GPC5, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
}
static void __init jive_machine_init(void)
@@ -634,22 +635,22 @@ static void __init jive_machine_init(void)
/* initialise the spi */
- s3c2410_gpio_setpin(S3C2410_GPG13, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPG(13), 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPB7, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPB(7), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPB6, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPG8, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
/* initialise the WM8750 spi */
- s3c2410_gpio_setpin(S3C2410_GPH10, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPH(10), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index eba66aa..9a5e4341 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -17,6 +17,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -84,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
switch (cmd)
{
case S3C2410_UDC_P_ENABLE :
- s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
break;
case S3C2410_UDC_P_DISABLE :
- s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
break;
case S3C2410_UDC_P_RESET :
break;
@@ -134,8 +135,8 @@ static void __init smdk2413_machine_init(void)
{ /* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
- s3c2410_gpio_setpin(S3C2410_GPF2, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index cde5ae9..5df73cb 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -33,6 +33,7 @@ config MACH_ANUBIS
select PM_SIMTEC if PM
select HAVE_PATA_PLATFORM
select S3C24XX_GPIO_EXTRA64
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics ANUBIS
development system
@@ -43,6 +44,7 @@ config MACH_OSIRIS
select S3C24XX_DCLK
select PM_SIMTEC if PM
select S3C24XX_GPIO_EXTRA128
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
@@ -58,12 +60,14 @@ config ARCH_S3C2440
bool "SMDK2440"
select CPU_S3C2440
select MACH_SMDK
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the SMDK2440.
config MACH_NEXCODER_2440
bool "NexVision NEXCODER 2440 Light Board"
select CPU_S3C2440
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
@@ -76,6 +80,7 @@ config SMDK2440_CPU2440
config MACH_AT2440EVB
bool "Avantech AT2440EVB development board"
select CPU_S3C2440
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the AT2440EVB development board
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 69b6cf3..e08e081 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -17,14 +17,16 @@
#include <linux/sysdev.h>
#include <linux/serial_core.h>
+#include <mach/map.h>
#include <mach/dma.h>
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 9c6abf9..68f3870 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -15,6 +15,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
@@ -468,7 +469,7 @@ static void __init anubis_map_io(void)
anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
} else {
/* ensure that the GPIO is setup */
- s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+ s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
}
}
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 315c42e..dfc70109 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -166,7 +166,7 @@ static struct platform_device at2440evb_device_eth = {
};
static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
- .gpio_detect = S3C2410_GPG10,
+ .gpio_detect = S3C2410_GPG(10),
};
/* 7" LCD panel */
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 7aeaa97..d43eded 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -18,6 +18,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/string.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
@@ -120,16 +121,16 @@ static struct platform_device *nexcoder_devices[] __initdata = {
static void __init nexcoder_sensorboard_init(void)
{
// Initialize SCCB bus
- s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
- s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_OUTP);
- s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
- s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP);
+ s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
+ s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
+ s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
// Power up the sensor board
- s3c2410_gpio_setpin(S3C2410_GPF1, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPF1_OUTP); // CAM_GPIO7 => nLDO_PWRDN
- s3c2410_gpio_setpin(S3C2410_GPF2, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN
+ s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
}
static void __init nexcoder_map_io(void)
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index c8a4668..cba064b 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -15,6 +15,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
@@ -291,8 +292,8 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
__raw_writeb(tmp, OSIRIS_VA_CTRL0);
/* ensure that an nRESET is not generated on resume. */
- s3c2410_gpio_setpin(S3C2410_GPA21, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+ s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
return 0;
}
@@ -304,7 +305,7 @@ static int osiris_pm_resume(struct sys_device *sd)
__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
- s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
return 0;
}
@@ -384,7 +385,7 @@ static void __init osiris_map_io(void)
osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
} else {
/* write-protect line to the NAND */
- s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+ s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
}
/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 8430e58..397f3b5 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -20,12 +20,13 @@
#include <mach/dma.h>
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index 6da82b5..f5af212 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -5,4 +5,27 @@
#
# Licensed under GPLv2
-# Currently nothing here, this will be added later
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+ bool
+ select CPU_S3C6400_INIT
+ select CPU_S3C6400_CLOCK
+ help
+ Enable S3C6400 CPU support
+
+config S3C6400_SETUP_SDHCI
+ bool
+ help
+ Internal configuration for default SDHCI
+ setup for S3C6400.
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+ bool "SMDK6400"
+ select CPU_S3C6400
+ select S3C_DEV_HSMMC
+ select S3C6400_SETUP_SDHCI
+ help
+ Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile
index 8f397db..df1ce4a 100644
--- a/arch/arm/mach-s3c6400/Makefile
+++ b/arch/arm/mach-s3c6400/Makefile
@@ -12,4 +12,12 @@ obj- :=
# Core support for S3C6400 system
-obj-n += blank.o
+obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
+
+# setup support
+
+obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
index 9771ac2..1067619 100644
--- a/arch/arm/mach-s3c6400/include/mach/dma.h
+++ b/arch/arm/mach-s3c6400/include/mach/dma.h
@@ -11,6 +11,63 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
-/* currently nothing here, placeholder */
+#define S3C_DMA_CHANNELS (16)
+
+/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+
+/* Note, for the S3C64XX architecture we keep the DMACH_
+ * defines in the order they are allocated to [S]DMA0/[S]DMA1
+ * so that is easy to do DHACH_ -> DMA controller conversion
+ */
+enum dma_ch {
+ /* DMA0/SDMA0 */
+ DMACH_UART0 = 0,
+ DMACH_UART0_SRC2,
+ DMACH_UART1,
+ DMACH_UART1_SRC2,
+ DMACH_UART2,
+ DMACH_UART2_SRC2,
+ DMACH_UART3,
+ DMACH_UART3_SRC2,
+ DMACH_PCM0_TX,
+ DMACH_PCM0_RX,
+ DMACH_I2S0_OUT,
+ DMACH_I2S0_IN,
+ DMACH_SPI0_TX,
+ DMACH_SPI0_RX,
+ DMACH_HSI_I2SV40_TX,
+ DMACH_HSI_I2SV40_RX,
+
+ /* DMA1/SDMA1 */
+ DMACH_PCM1_TX = 16,
+ DMACH_PCM1_RX,
+ DMACH_I2S1_OUT,
+ DMACH_I2S1_IN,
+ DMACH_SPI1_TX,
+ DMACH_SPI1_RX,
+ DMACH_AC97_PCMOUT,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_MICIN,
+ DMACH_PWM,
+ DMACH_IRDA,
+ DMACH_EXTERNAL,
+ DMACH_RES1,
+ DMACH_RES2,
+ DMACH_SECURITY_RX, /* SDMA1 only */
+ DMACH_SECURITY_TX, /* SDMA1 only */
+ DMACH_MAX /* the end */
+};
+
+static __inline__ int s3c_dma_has_circular(void)
+{
+ /* we will be supporting ciruclar buffers as soon as we have DMA
+ * engine support.
+ */
+ return 1;
+}
+
+#define S3C2410_DMAF_CIRCULAR (1 << 0)
+
+#include <plat/dma.h>
#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 8199972..5057d99 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -39,6 +39,8 @@
#define S3C_VA_UART3 S3C_VA_UARTx(3)
#define S3C64XX_PA_FB (0x77100000)
+#define S3C64XX_PA_USB_HSOTG (0x7C000000)
+#define S3C64XX_PA_WATCHDOG (0x7E004000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
#define S3C64XX_PA_IIS0 (0x7F002000)
#define S3C64XX_PA_IIS1 (0x7F003000)
@@ -57,6 +59,8 @@
#define S3C64XX_PA_MODEM (0x74108000)
#define S3C64XX_VA_MODEM S3C_ADDR(0x00600000)
+#define S3C64XX_PA_USBHOST (0x74300000)
+
/* place VICs close together */
#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00)
#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
@@ -69,5 +73,7 @@
#define S3C_PA_IIC S3C64XX_PA_IIC0
#define S3C_PA_IIC1 S3C64XX_PA_IIC1
#define S3C_PA_FB S3C64XX_PA_FB
+#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
+#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
#endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-clock.h b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
new file mode 100644
index 0000000..a6c7f4e
--- /dev/null
+++ b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - clock register compatibility with s3c24xx
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-clock.h>
+
diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c6400/include/mach/system.h
index 090cfd9..2e58cb7 100644
--- a/arch/arm/mach-s3c6400/include/mach/system.h
+++ b/arch/arm/mach-s3c6400/include/mach/system.h
@@ -11,6 +11,8 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
+#include <plat/watchdog-reset.h>
+
static void arch_idle(void)
{
/* nothing here yet */
@@ -18,7 +20,11 @@ static void arch_idle(void)
static void arch_reset(char mode, const char *cmd)
{
- /* nothing here yet */
+ if (mode != 's')
+ arch_wdt_reset();
+
+ /* if all else fails, or mode was for soft, jump to 0 */
+ cpu_reset(0);
}
#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/mach-smdk6400.c b/arch/arm/mach-s3c6400/mach-smdk6400.c
new file mode 100644
index 0000000..ab19285
--- /dev/null
+++ b/arch/arm/mach-s3c6400/mach-smdk6400.c
@@ -0,0 +1,96 @@
+/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/s3c6400.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+};
+
+static struct map_desc smdk6400_iodesc[] = {};
+
+static void __init smdk6400_map_io(void)
+{
+ s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
+}
+
+static struct platform_device *smdk6400_devices[] __initdata = {
+ &s3c_device_hsmmc1,
+ &s3c_device_i2c0,
+};
+
+static struct i2c_board_info i2c_devs[] __initdata = {
+ { I2C_BOARD_INFO("wm8753", 0x1A), },
+ { I2C_BOARD_INFO("24c08", 0x50), },
+};
+
+static void __init smdk6400_machine_init(void)
+{
+ i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
+ platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
+}
+
+MACHINE_START(SMDK6400, "SMDK6400")
+ /* Maintainer: Ben Dooks <ben@fluff.org> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+
+ .init_irq = s3c6400_init_irq,
+ .map_io = smdk6400_map_io,
+ .init_machine = smdk6400_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
new file mode 100644
index 0000000..1ece887
--- /dev/null
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -0,0 +1,89 @@
+/* linux/arch/arm/mach-s3c6410/cpu.c
+ *
+ * Copyright 2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s3c6400.h>
+
+void __init s3c6400_map_io(void)
+{
+ /* setup SDHCI */
+
+ s3c6400_default_sdhci0();
+ s3c6400_default_sdhci1();
+
+ /* the i2c devices are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+}
+
+void __init s3c6400_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+ s3c24xx_register_baseclocks(xtal);
+ s3c64xx_register_clocks();
+ s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK);
+ s3c6400_setup_clocks();
+}
+
+void __init s3c6400_init_irq(void)
+{
+ /* VIC0 does not have IRQS 5..7,
+ * VIC1 is fully populated. */
+ s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
+}
+
+struct sysdev_class s3c6400_sysclass = {
+ .name = "s3c6400-core",
+};
+
+static struct sys_device s3c6400_sysdev = {
+ .cls = &s3c6400_sysclass,
+};
+
+static int __init s3c6400_core_init(void)
+{
+ return sysdev_class_register(&s3c6400_sysclass);
+}
+
+core_initcall(s3c6400_core_init);
+
+int __init s3c6400_init(void)
+{
+ printk("S3C6400: Initialising architecture\n");
+
+ return sysdev_register(&s3c6400_sysdev);
+}
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c
new file mode 100644
index 0000000..b93dafb
--- /dev/null
+++ b/arch/arm/mach-s3c6400/setup-sdhci.c
@@ -0,0 +1,63 @@
+/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c6400_hsmmc_clksrcs[4] = {
+ [0] = "hsmmc",
+ [1] = "hsmmc",
+ [2] = "mmc_bus",
+ /* [3] = "48m", - note not succesfully used yet */
+};
+
+void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card)
+{
+ u32 ctrl2, ctrl3;
+
+ ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+ ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+ ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+ S3C_SDHCI_CTRL2_ENFBCLKRX |
+ S3C_SDHCI_CTRL2_DFCNT_NONE |
+ S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+ if (ios->clock < 25 * 1000000)
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+ S3C_SDHCI_CTRL3_FCSEL2 |
+ S3C_SDHCI_CTRL3_FCSEL1 |
+ S3C_SDHCI_CTRL3_FCSEL0);
+ else
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+ printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+ writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+ writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
+
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 1d50100..e63aac7f 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -16,9 +16,18 @@ config CPU_S3C6410
config S3C6410_SETUP_SDHCI
bool
+ select S3C64XX_SETUP_SDHCI_GPIO
help
Internal helper functions for S3C6410 based SDHCI systems
+config MACH_ANW6410
+ bool "A&W6410"
+ select CPU_S3C6410
+ select S3C_DEV_FB
+ select S3C64XX_SETUP_FB_24BPP
+ help
+ Machine support for the A&W6410
+
config MACH_SMDK6410
bool "SMDK6410"
select CPU_S3C6410
@@ -26,6 +35,8 @@ config MACH_SMDK6410
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
select S3C_DEV_FB
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_USB_HSOTG
select S3C6410_SETUP_SDHCI
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_FB_24BPP
@@ -60,3 +71,29 @@ config SMDK6410_SD_CH1
channels 0 and 1 are the same.
endchoice
+
+config SMDK6410_WM1190_EV1
+ bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+ depends on MACH_SMDK6410
+ select REGULATOR
+ select REGULATOR_WM8350
+ select MFD_WM8350_I2C
+ select MFD_WM8350_CONFIG_MODE_0
+ select MFD_WM8350_CONFIG_MODE_3
+ select MFD_WM8352_CONFIG_MODE_0
+ help
+ The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+ and audio daughtercard for the Samsung SMDK6410 reference
+ platform. Enabling this option will build support for this
+ module into the kernel. The presence of the module will be
+ detected at runtime so the the resulting kernel can be used
+ with or without the 1190-EV1 fitted.
+
+config MACH_NCP
+ bool "NCP"
+ select CPU_S3C6410
+ select S3C_DEV_I2C1
+ select S3C_DEV_HSMMC1
+ select S3C64XX_SETUP_I2C1
+ help
+ Machine support for the Samsung NCP
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 2cd4f18..6f9deac 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -20,4 +20,8 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci.o
# machine support
+obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
+obj-$(CONFIG_MACH_NCP) += mach-ncp.o
+
+
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index 6a73ca6..ade904d 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -31,6 +31,7 @@
#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
+#include <plat/regs-clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
@@ -68,7 +69,7 @@ void __init s3c6410_init_clocks(int xtal)
printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
s3c24xx_register_baseclocks(xtal);
s3c64xx_register_clocks();
- s3c6400_register_clocks();
+ s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK);
s3c6400_setup_clocks();
}
diff --git a/arch/arm/mach-s3c6410/mach-anw6410.c b/arch/arm/mach-s3c6410/mach-anw6410.c
new file mode 100644
index 0000000..661cca6
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-anw6410.c
@@ -0,0 +1,245 @@
+/* linux/arch/arm/mach-s3c6410/mach-anw6410.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ * Copyright 2009 Kwangwoo Lee
+ * Kwangwoo Lee <kwangwoo.lee@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/dm9000.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-modem.h>
+
+/* DM9000 */
+#define ANW6410_PA_DM9000 (0x18000000)
+
+/* A hardware buffer to control external devices is mapped at 0x30000000.
+ * It can not be read. So current status must be kept in anw6410_extdev_status.
+ */
+#define ANW6410_VA_EXTDEV S3C_ADDR(0x02000000)
+#define ANW6410_PA_EXTDEV (0x30000000)
+
+#define ANW6410_EN_DM9000 (1<<11)
+#define ANW6410_EN_LCD (1<<14)
+
+static __u32 anw6410_extdev_status;
+
+static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+};
+
+/* framebuffer and LCD setup. */
+static void __init anw6410_lcd_mode_set(void)
+{
+ u32 tmp;
+
+ /* set the LCD type */
+ tmp = __raw_readl(S3C64XX_SPCON);
+ tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+ tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+ __raw_writel(tmp, S3C64XX_SPCON);
+
+ /* remove the LCD bypass */
+ tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+ tmp &= ~MIFPCON_LCD_BYPASS;
+ __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/* GPF1 = LCD panel power
+ * GPF4 = LCD backlight control
+ */
+static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+ anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
+ __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+ gpio_direction_output(S3C64XX_GPF(1), 1);
+ gpio_direction_output(S3C64XX_GPF(4), 1);
+ } else {
+ anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
+ __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+ gpio_direction_output(S3C64XX_GPF(1), 0);
+ gpio_direction_output(S3C64XX_GPF(4), 0);
+ }
+}
+
+static struct plat_lcd_data anw6410_lcd_power_data = {
+ .set_power = anw6410_lcd_power_set,
+};
+
+static struct platform_device anw6410_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &anw6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win anw6410_fb_win0 = {
+ /* this is to ensure we use win0 */
+ .win_mode = {
+ .pixclock = 41094,
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &anw6410_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+static void __init anw6410_dm9000_enable(void)
+{
+ anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
+ __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+}
+
+static struct resource anw6410_dm9000_resource[] = {
+ [0] = {
+ .start = ANW6410_PA_DM9000,
+ .end = ANW6410_PA_DM9000 + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = ANW6410_PA_DM9000 + 4,
+ .end = ANW6410_PA_DM9000 + 4 + 500,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_EINT(15),
+ .end = IRQ_EINT(15),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+ },
+};
+
+static struct dm9000_plat_data anw6410_dm9000_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+ /* dev_addr can be set to provide hwaddr. */
+};
+
+static struct platform_device anw6410_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(anw6410_dm9000_resource),
+ .resource = anw6410_dm9000_resource,
+ .dev = {
+ .platform_data = &anw6410_dm9000_pdata,
+ },
+};
+
+static struct map_desc anw6410_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)ANW6410_VA_EXTDEV,
+ .pfn = __phys_to_pfn(ANW6410_PA_EXTDEV),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct platform_device *anw6410_devices[] __initdata = {
+ &s3c_device_fb,
+ &anw6410_lcd_powerdev,
+ &anw6410_device_eth,
+};
+
+static void __init anw6410_map_io(void)
+{
+ s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
+
+ anw6410_lcd_mode_set();
+}
+
+static void __init anw6410_machine_init(void)
+{
+ s3c_fb_set_platdata(&anw6410_lcd_pdata);
+
+ gpio_request(S3C64XX_GPF(1), "panel power");
+ gpio_request(S3C64XX_GPF(4), "LCD backlight");
+
+ anw6410_dm9000_enable();
+
+ platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
+}
+
+MACHINE_START(ANW6410, "A&W6410")
+ /* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+
+ .init_irq = s3c6410_init_irq,
+ .map_io = anw6410_map_io,
+ .init_machine = anw6410_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c
new file mode 100644
index 0000000..6030636
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-ncp.c
@@ -0,0 +1,107 @@
+/*
+ * linux/arch/arm/mach-s3c6410/mach-ncp.c
+ *
+ * Copyright (C) 2008-2009 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
+ /* REVISIT: NCP uses only serial 1, 2 */
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+static struct platform_device *ncp_devices[] __initdata = {
+ &s3c_device_hsmmc1,
+ &s3c_device_i2c0,
+};
+
+struct map_desc ncp_iodesc[] = {};
+
+static void __init ncp_map_io(void)
+{
+ s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+}
+
+static void __init ncp_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+
+ platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
+}
+
+MACHINE_START(NCP, "NCP")
+ /* Maintainer: Samsung Electronics */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .init_irq = s3c6410_init_irq,
+ .map_io = ncp_map_io,
+ .init_machine = ncp_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 7f473e4..bc9a7de 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -24,6 +24,12 @@
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/delay.h>
+#include <linux/smsc911x.h>
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
#include <video/platform_lcd.h>
@@ -39,8 +45,12 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
+#include <plat/regs-modem.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-sys.h>
#include <plat/iic.h>
#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
#include <plat/s3c6410.h>
#include <plat/clock.h>
@@ -129,6 +139,37 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
};
+static struct resource smdk6410_smsc911x_resources[] = {
+ [0] = {
+ .start = 0x18000000,
+ .end = 0x18000000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = S3C_EINT(10),
+ .end = S3C_EINT(10),
+ .flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
+ },
+};
+
+static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+
+static struct platform_device smdk6410_smsc911x = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
+ .resource = &smdk6410_smsc911x_resources[0],
+ .dev = {
+ .platform_data = &smdk6410_smsc911x_pdata,
+ },
+};
+
static struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
@@ -141,12 +182,155 @@ static struct platform_device *smdk6410_devices[] __initdata = {
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_fb,
+ &s3c_device_usb,
+ &s3c_device_usb_hsotg,
&smdk6410_lcd_powerdev,
+
+ &smdk6410_smsc911x,
+};
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+/* S3C64xx internal logic & PLL */
+static struct regulator_init_data wm8350_dcdc1_data = {
+ .constraints = {
+ .name = "PVDD_INT/PVDD_PLL",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .always_on = 1,
+ .apply_uV = 1,
+ },
+};
+
+/* Memory */
+static struct regulator_init_data wm8350_dcdc3_data = {
+ .constraints = {
+ .name = "PVDD_MEM",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .always_on = 1,
+ .state_mem = {
+ .uV = 1800000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ .initial_state = PM_SUSPEND_MEM,
+ },
+};
+
+/* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_init_data wm8350_dcdc4_data = {
+ .constraints = {
+ .name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .always_on = 1,
+ },
+};
+
+/* ARM core */
+static struct regulator_consumer_supply dcdc6_consumers[] = {
+ {
+ .supply = "vddarm",
+ }
+};
+
+static struct regulator_init_data wm8350_dcdc6_data = {
+ .constraints = {
+ .name = "PVDD_ARM",
+ .min_uV = 1000000,
+ .max_uV = 1300000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers),
+ .consumer_supplies = dcdc6_consumers,
};
+/* Alive */
+static struct regulator_init_data wm8350_ldo1_data = {
+ .constraints = {
+ .name = "PVDD_ALIVE",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .always_on = 1,
+ .apply_uV = 1,
+ },
+};
+
+/* OTG */
+static struct regulator_init_data wm8350_ldo2_data = {
+ .constraints = {
+ .name = "PVDD_OTG",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .always_on = 1,
+ },
+};
+
+/* LCD */
+static struct regulator_init_data wm8350_ldo3_data = {
+ .constraints = {
+ .name = "PVDD_LCD",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .always_on = 1,
+ },
+};
+
+/* OTGi/1190-EV1 HPVDD & AVDD */
+static struct regulator_init_data wm8350_ldo4_data = {
+ .constraints = {
+ .name = "PVDD_OTGI/HPVDD/AVDD",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct {
+ int regulator;
+ struct regulator_init_data *initdata;
+} wm1190_regulators[] = {
+ { WM8350_DCDC_1, &wm8350_dcdc1_data },
+ { WM8350_DCDC_3, &wm8350_dcdc3_data },
+ { WM8350_DCDC_4, &wm8350_dcdc4_data },
+ { WM8350_DCDC_6, &wm8350_dcdc6_data },
+ { WM8350_LDO_1, &wm8350_ldo1_data },
+ { WM8350_LDO_2, &wm8350_ldo2_data },
+ { WM8350_LDO_3, &wm8350_ldo3_data },
+ { WM8350_LDO_4, &wm8350_ldo4_data },
+};
+
+static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
+{
+ int i;
+
+ /* Instantiate the regulators */
+ for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
+ wm8350_register_regulator(wm8350,
+ wm1190_regulators[i].regulator,
+ wm1190_regulators[i].initdata);
+
+ return 0;
+}
+
+static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
+ .init = smdk6410_wm8350_init,
+ .irq_high = 1,
+};
+#endif
+
static struct i2c_board_info i2c_devs0[] __initdata = {
{ I2C_BOARD_INFO("24c08", 0x50), },
{ I2C_BOARD_INFO("wm8580", 0x1b), },
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+ { I2C_BOARD_INFO("wm8350", 0x1a),
+ .platform_data = &smdk6410_wm8350_pdata,
+ .irq = S3C_EINT(12),
+ },
+#endif
};
static struct i2c_board_info i2c_devs1[] __initdata = {
@@ -155,9 +339,23 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
static void __init smdk6410_map_io(void)
{
+ u32 tmp;
+
s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+
+ /* set the LCD type */
+
+ tmp = __raw_readl(S3C64XX_SPCON);
+ tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+ tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+ __raw_writel(tmp, S3C64XX_SPCON);
+
+ /* remove the lcd bypass */
+ tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+ tmp &= ~MIFPCON_LCD_BYPASS;
+ __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
}
static void __init smdk6410_machine_init(void)
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
index 0b5788b..20666f3 100644
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ b/arch/arm/mach-s3c6410/setup-sdhci.c
@@ -21,8 +21,6 @@
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
-#include <mach/gpio.h>
-#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
@@ -35,22 +33,6 @@ char *s3c6410_hsmmc_clksrcs[4] = {
/* [3] = "48m", - note not succesfully used yet */
};
-void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
- unsigned int gpio;
- unsigned int end;
-
- end = S3C64XX_GPG(2 + width);
-
- /* Set all the necessary GPG pins to special-function 0 */
- for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
-}
void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
void __iomem *r,
@@ -84,19 +66,3 @@ void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
writel(ctrl3, r + S3C_SDHCI_CONTROL3);
}
-void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
- unsigned int gpio;
- unsigned int end;
-
- end = S3C64XX_GPH(2 + width);
-
- /* Set all the necessary GPG pins to special-function 0 */
- for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
-}
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
deleted file mode 100644
index 444f266..0000000
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Based on spitz_pm.c and sharp code.
- *
- * Copyright (C) 2001 SHARP
- * Copyright 2005 Pavel Machek <pavel@suse.cz>
- *
- * Distribute under GPLv2.
- *
- * Li-ion batteries are angry beasts, and they like to explode. This driver is not finished,
- * and sometimes charges them when it should not. If it makes angry lithium to come your way...
- * ...well, you have been warned.
- *
- * Actually, this should be quite safe, it seems sharp leaves charger enabled by default,
- * and my collie did not explode (yet).
- */
-
-#include <linux/module.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/hardware/scoop.h>
-#include <mach/dma.h>
-#include <mach/collie.h>
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/sharpsl_pm.h>
-
-#include "../drivers/mfd/ucb1x00.h"
-
-static struct ucb1x00 *ucb;
-static int ad_revise;
-
-#define ADCtoPower(x) ((330 * x * 2) / 1024)
-
-static void collie_charger_init(void)
-{
- int err;
-
- if (sharpsl_param.adadj != -1)
- ad_revise = sharpsl_param.adadj;
-
- /* Register interrupt handler. */
- if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, IRQF_DISABLED,
- "ACIN", sharpsl_ac_isr))) {
- printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_AC_IN);
- return;
- }
- if ((err = request_irq(COLLIE_IRQ_GPIO_CO, sharpsl_chrg_full_isr, IRQF_DISABLED,
- "CO", sharpsl_chrg_full_isr))) {
- free_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr);
- printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_CO);
- return;
- }
-
- gpio_request(COLLIE_GPIO_CHARGE_ON, "charge on");
- gpio_direction_output(COLLIE_GPIO_CHARGE_ON, 1);
-
- ucb1x00_io_set_dir(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON | COLLIE_TC35143_GPIO_TMP_ON |
- COLLIE_TC35143_GPIO_BBAT_ON);
- return;
-}
-
-static void collie_measure_temp(int on)
-{
- if (on)
- ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0);
- else
- ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON);
-}
-
-static void collie_charge(int on)
-{
- /* Zaurus seems to contain LTC1731; it should know when to
- * stop charging itself, so setting charge on should be
- * relatively harmless (as long as it is not done too often).
- */
- gpio_set_value(COLLIE_GPIO_CHARGE_ON, on);
-}
-
-static void collie_discharge(int on)
-{
-}
-
-static void collie_discharge1(int on)
-{
-}
-
-static void collie_presuspend(void)
-{
-}
-
-static void collie_postsuspend(void)
-{
-}
-
-static int collie_should_wakeup(unsigned int resume_on_alarm)
-{
- return 0;
-}
-
-static unsigned long collie_charger_wakeup(void)
-{
- return 0;
-}
-
-int collie_read_backup_battery(void)
-{
- int voltage;
-
- ucb1x00_adc_enable(ucb);
-
- ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_BBAT_ON, 0);
- voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
-
- ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
- ucb1x00_adc_disable(ucb);
-
- printk("Backup battery = %d(%d)\n", ADCtoPower(voltage), voltage);
-
- return ADCtoPower(voltage);
-}
-
-int collie_read_main_battery(void)
-{
- int voltage, voltage_rev, voltage_volts;
-
- ucb1x00_adc_enable(ucb);
- ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
- ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_MBAT_ON, 0);
-
- mdelay(1);
- voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
-
- ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON);
- ucb1x00_adc_disable(ucb);
-
- voltage_rev = voltage + ((ad_revise * voltage) / 652);
- voltage_volts = ADCtoPower(voltage_rev);
-
- printk("Main battery = %d(%d)\n", voltage_volts, voltage);
-
- if (voltage != -1)
- return voltage_volts;
- else
- return voltage;
-}
-
-int collie_read_temp(void)
-{
- int voltage;
-
- /* According to Sharp, temp must be > 973, main battery must be < 465,
- FIXME: sharpsl_pm.c has both conditions negated? FIXME: values
- are way out of range? */
-
- ucb1x00_adc_enable(ucb);
- ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0);
- /* >1010 = battery removed, 460 = 22C ?, higher = lower temp ? */
- voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD0, UCB_SYNC);
- ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON);
- ucb1x00_adc_disable(ucb);
-
- printk("Battery temp = %d\n", voltage);
- return voltage;
-}
-
-static unsigned long read_devdata(int which)
-{
- switch (which) {
- case SHARPSL_BATT_VOLT:
- return collie_read_main_battery();
- case SHARPSL_BATT_TEMP:
- return collie_read_temp();
- case SHARPSL_ACIN_VOLT:
- return 500;
- case SHARPSL_STATUS_ACIN: {
- int ret = GPLR & COLLIE_GPIO_AC_IN;
- printk("AC status = %d\n", ret);
- return ret;
- }
- case SHARPSL_STATUS_FATAL: {
- int ret = GPLR & COLLIE_GPIO_MAIN_BAT_LOW;
- printk("Fatal bat = %d\n", ret);
- return ret;
- }
- default:
- return ~0;
- }
-}
-
-struct battery_thresh collie_battery_levels_acin[] = {
- { 420, 100},
- { 417, 95},
- { 415, 90},
- { 413, 80},
- { 411, 75},
- { 408, 70},
- { 406, 60},
- { 403, 50},
- { 398, 40},
- { 391, 25},
- { 10, 5},
- { 0, 0},
-};
-
-struct battery_thresh collie_battery_levels[] = {
- { 394, 100},
- { 390, 95},
- { 380, 90},
- { 370, 80},
- { 368, 75}, /* From sharp code: battery high with frontlight */
- { 366, 70}, /* 60..90 -- fake values invented by me for testing */
- { 364, 60},
- { 362, 50},
- { 360, 40},
- { 358, 25}, /* From sharp code: battery low with frontlight */
- { 356, 5}, /* From sharp code: battery verylow with frontlight */
- { 0, 0},
-};
-
-struct sharpsl_charger_machinfo collie_pm_machinfo = {
- .init = collie_charger_init,
- .read_devdata = read_devdata,
- .discharge = collie_discharge,
- .discharge1 = collie_discharge1,
- .charge = collie_charge,
- .measure_temp = collie_measure_temp,
- .presuspend = collie_presuspend,
- .postsuspend = collie_postsuspend,
- .charger_wakeup = collie_charger_wakeup,
- .should_wakeup = collie_should_wakeup,
- .bat_levels = 12,
- .bat_levels_noac = collie_battery_levels,
- .bat_levels_acin = collie_battery_levels_acin,
- .status_high_acin = 368,
- .status_low_acin = 358,
- .status_high_noac = 368,
- .status_low_noac = 358,
- .charge_on_volt = 350, /* spitz uses 2.90V, but lets play it safe. */
- .charge_on_temp = 550,
- .charge_acin_high = 550, /* collie does not seem to have sensor for this, anyway */
- .charge_acin_low = 450, /* ignored, too */
- .fatal_acin_volt = 356,
- .fatal_noacin_volt = 356,
-
- .batfull_irq = 1, /* We do not want periodical charge restarts */
-};
-
-static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev)
-{
- sharpsl_pm.machinfo = &collie_pm_machinfo;
- ucb = pdev->ucb;
- return 0;
-}
-
-static struct ucb1x00_driver collie_pm_ucb_driver = {
- .add = collie_pm_ucb_add,
-};
-
-static struct platform_device *collie_pm_device;
-
-static int __init collie_pm_init(void)
-{
- int ret;
-
- collie_pm_device = platform_device_alloc("sharpsl-pm", -1);
- if (!collie_pm_device)
- return -ENOMEM;
-
- collie_pm_device->dev.platform_data = &collie_pm_machinfo;
- ret = platform_device_add(collie_pm_device);
-
- if (ret)
- platform_device_put(collie_pm_device);
-
- if (!ret)
- ret = ucb1x00_register_driver(&collie_pm_ucb_driver);
-
- return ret;
-}
-
-static void __exit collie_pm_exit(void)
-{
- ucb1x00_unregister_driver(&collie_pm_ucb_driver);
- platform_device_unregister(collie_pm_device);
-}
-
-module_init(collie_pm_init);
-module_exit(collie_pm_exit);
diff --git a/arch/arm/mach-stmp378x/Makefile b/arch/arm/mach-stmp378x/Makefile
new file mode 100644
index 0000000..d156f76
--- /dev/null
+++ b/arch/arm/mach-stmp378x/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ARCH_STMP378X) += stmp378x.o
+obj-$(CONFIG_MACH_STMP378X) += stmp378x_devb.o
diff --git a/arch/arm/mach-stmp378x/Makefile.boot b/arch/arm/mach-stmp378x/Makefile.boot
new file mode 100644
index 0000000..1568ad4
--- /dev/null
+++ b/arch/arm/mach-stmp378x/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x40008000
+params_phys-y := 0x40000100
+initrd_phys-y := 0x40800000
diff --git a/arch/arm/mach-stmp378x/include/mach/entry-macro.S b/arch/arm/mach-stmp378x/include/mach/entry-macro.S
new file mode 100644
index 0000000..731a922
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/entry-macro.S
@@ -0,0 +1,35 @@
+/*
+ * Low-level IRQ helper macros for Freescale STMP378X
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ mov \base, #0xf0000000 @ vm address of IRQ controller
+ ldr \irqnr, [\base, #0x70] @ HW_ICOLL_STAT
+ cmp \irqnr, #0x7f
+ moveqs \irqnr, #0 @ Zero flag set for no IRQ
+
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
diff --git a/arch/arm/mach-stmp378x/include/mach/irqs.h b/arch/arm/mach-stmp378x/include/mach/irqs.h
new file mode 100644
index 0000000..cc59673
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/irqs.h
@@ -0,0 +1,95 @@
+/*
+ * Freescale STMP378X interrupts
+ *
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#define IRQ_DEBUG_UART 0
+#define IRQ_COMMS_RX 1
+#define IRQ_COMMS_TX 1
+#define IRQ_SSP2_ERROR 2
+#define IRQ_VDD5V 3
+#define IRQ_HEADPHONE_SHORT 4
+#define IRQ_DAC_DMA 5
+#define IRQ_DAC_ERROR 6
+#define IRQ_ADC_DMA 7
+#define IRQ_ADC_ERROR 8
+#define IRQ_SPDIF_DMA 9
+#define IRQ_SAIF2_DMA 9
+#define IRQ_SPDIF_ERROR 10
+#define IRQ_SAIF1_IRQ 10
+#define IRQ_SAIF2_IRQ 10
+#define IRQ_USB_CTRL 11
+#define IRQ_USB_WAKEUP 12
+#define IRQ_GPMI_DMA 13
+#define IRQ_SSP1_DMA 14
+#define IRQ_SSP_ERROR 15
+#define IRQ_GPIO0 16
+#define IRQ_GPIO1 17
+#define IRQ_GPIO2 18
+#define IRQ_SAIF1_DMA 19
+#define IRQ_SSP2_DMA 20
+#define IRQ_ECC8_IRQ 21
+#define IRQ_RTC_ALARM 22
+#define IRQ_UARTAPP_TX_DMA 23
+#define IRQ_UARTAPP_INTERNAL 24
+#define IRQ_UARTAPP_RX_DMA 25
+#define IRQ_I2C_DMA 26
+#define IRQ_I2C_ERROR 27
+#define IRQ_TIMER0 28
+#define IRQ_TIMER1 29
+#define IRQ_TIMER2 30
+#define IRQ_TIMER3 31
+#define IRQ_BATT_BRNOUT 32
+#define IRQ_VDDD_BRNOUT 33
+#define IRQ_VDDIO_BRNOUT 34
+#define IRQ_VDD18_BRNOUT 35
+#define IRQ_TOUCH_DETECT 36
+#define IRQ_LRADC_CH0 37
+#define IRQ_LRADC_CH1 38
+#define IRQ_LRADC_CH2 39
+#define IRQ_LRADC_CH3 40
+#define IRQ_LRADC_CH4 41
+#define IRQ_LRADC_CH5 42
+#define IRQ_LRADC_CH6 43
+#define IRQ_LRADC_CH7 44
+#define IRQ_LCDIF_DMA 45
+#define IRQ_LCDIF_ERROR 46
+#define IRQ_DIGCTL_DEBUG_TRAP 47
+#define IRQ_RTC_1MSEC 48
+#define IRQ_DRI_DMA 49
+#define IRQ_DRI_ATTENTION 50
+#define IRQ_GPMI_ATTENTION 51
+#define IRQ_IR 52
+#define IRQ_DCP_VMI 53
+#define IRQ_DCP 54
+#define IRQ_BCH 56
+#define IRQ_PXP 57
+#define IRQ_UARTAPP2_TX_DMA 58
+#define IRQ_UARTAPP2_INTERNAL 59
+#define IRQ_UARTAPP2_RX_DMA 60
+#define IRQ_VDAC_DETECT 61
+#define IRQ_VDD5V_DROOP 64
+#define IRQ_DCDC4P2_BO 65
+
+
+#define NR_REAL_IRQS 128
+#define NR_IRQS (NR_REAL_IRQS + 32 * 3)
+
+/* All interrupts are FIQ capable */
+#define FIQ_START IRQ_DEBUG_UART
+
+/* Hard disk IRQ is a GPMI attention IRQ */
+#define IRQ_HARDDISK IRQ_GPMI_ATTENTION
diff --git a/arch/arm/mach-stmp378x/include/mach/pins.h b/arch/arm/mach-stmp378x/include/mach/pins.h
new file mode 100644
index 0000000..93f952d
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/pins.h
@@ -0,0 +1,151 @@
+/*
+ * Freescale STMP378X SoC pin multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_PINS_H
+#define __ASM_ARCH_PINS_H
+
+/*
+ * Define all STMP378x pins, a pin name corresponds to a STMP378x hardware
+ * interface this pin belongs to.
+ */
+
+/* Bank 0 */
+#define PINID_GPMI_D00 STMP3XXX_PINID(0, 0)
+#define PINID_GPMI_D01 STMP3XXX_PINID(0, 1)
+#define PINID_GPMI_D02 STMP3XXX_PINID(0, 2)
+#define PINID_GPMI_D03 STMP3XXX_PINID(0, 3)
+#define PINID_GPMI_D04 STMP3XXX_PINID(0, 4)
+#define PINID_GPMI_D05 STMP3XXX_PINID(0, 5)
+#define PINID_GPMI_D06 STMP3XXX_PINID(0, 6)
+#define PINID_GPMI_D07 STMP3XXX_PINID(0, 7)
+#define PINID_GPMI_D08 STMP3XXX_PINID(0, 8)
+#define PINID_GPMI_D09 STMP3XXX_PINID(0, 9)
+#define PINID_GPMI_D10 STMP3XXX_PINID(0, 10)
+#define PINID_GPMI_D11 STMP3XXX_PINID(0, 11)
+#define PINID_GPMI_D12 STMP3XXX_PINID(0, 12)
+#define PINID_GPMI_D13 STMP3XXX_PINID(0, 13)
+#define PINID_GPMI_D14 STMP3XXX_PINID(0, 14)
+#define PINID_GPMI_D15 STMP3XXX_PINID(0, 15)
+#define PINID_GPMI_CLE STMP3XXX_PINID(0, 16)
+#define PINID_GPMI_ALE STMP3XXX_PINID(0, 17)
+#define PINID_GMPI_CE2N STMP3XXX_PINID(0, 18)
+#define PINID_GPMI_RDY0 STMP3XXX_PINID(0, 19)
+#define PINID_GPMI_RDY1 STMP3XXX_PINID(0, 20)
+#define PINID_GPMI_RDY2 STMP3XXX_PINID(0, 21)
+#define PINID_GPMI_RDY3 STMP3XXX_PINID(0, 22)
+#define PINID_GPMI_WPN STMP3XXX_PINID(0, 23)
+#define PINID_GPMI_WRN STMP3XXX_PINID(0, 24)
+#define PINID_GPMI_RDN STMP3XXX_PINID(0, 25)
+#define PINID_AUART1_CTS STMP3XXX_PINID(0, 26)
+#define PINID_AUART1_RTS STMP3XXX_PINID(0, 27)
+#define PINID_AUART1_RX STMP3XXX_PINID(0, 28)
+#define PINID_AUART1_TX STMP3XXX_PINID(0, 29)
+#define PINID_I2C_SCL STMP3XXX_PINID(0, 30)
+#define PINID_I2C_SDA STMP3XXX_PINID(0, 31)
+
+/* Bank 1 */
+#define PINID_LCD_D00 STMP3XXX_PINID(1, 0)
+#define PINID_LCD_D01 STMP3XXX_PINID(1, 1)
+#define PINID_LCD_D02 STMP3XXX_PINID(1, 2)
+#define PINID_LCD_D03 STMP3XXX_PINID(1, 3)
+#define PINID_LCD_D04 STMP3XXX_PINID(1, 4)
+#define PINID_LCD_D05 STMP3XXX_PINID(1, 5)
+#define PINID_LCD_D06 STMP3XXX_PINID(1, 6)
+#define PINID_LCD_D07 STMP3XXX_PINID(1, 7)
+#define PINID_LCD_D08 STMP3XXX_PINID(1, 8)
+#define PINID_LCD_D09 STMP3XXX_PINID(1, 9)
+#define PINID_LCD_D10 STMP3XXX_PINID(1, 10)
+#define PINID_LCD_D11 STMP3XXX_PINID(1, 11)
+#define PINID_LCD_D12 STMP3XXX_PINID(1, 12)
+#define PINID_LCD_D13 STMP3XXX_PINID(1, 13)
+#define PINID_LCD_D14 STMP3XXX_PINID(1, 14)
+#define PINID_LCD_D15 STMP3XXX_PINID(1, 15)
+#define PINID_LCD_D16 STMP3XXX_PINID(1, 16)
+#define PINID_LCD_D17 STMP3XXX_PINID(1, 17)
+#define PINID_LCD_RESET STMP3XXX_PINID(1, 18)
+#define PINID_LCD_RS STMP3XXX_PINID(1, 19)
+#define PINID_LCD_WR STMP3XXX_PINID(1, 20)
+#define PINID_LCD_CS STMP3XXX_PINID(1, 21)
+#define PINID_LCD_DOTCK STMP3XXX_PINID(1, 22)
+#define PINID_LCD_ENABLE STMP3XXX_PINID(1, 23)
+#define PINID_LCD_HSYNC STMP3XXX_PINID(1, 24)
+#define PINID_LCD_VSYNC STMP3XXX_PINID(1, 25)
+#define PINID_PWM0 STMP3XXX_PINID(1, 26)
+#define PINID_PWM1 STMP3XXX_PINID(1, 27)
+#define PINID_PWM2 STMP3XXX_PINID(1, 28)
+#define PINID_PWM3 STMP3XXX_PINID(1, 29)
+#define PINID_PWM4 STMP3XXX_PINID(1, 30)
+
+/* Bank 2 */
+#define PINID_SSP1_CMD STMP3XXX_PINID(2, 0)
+#define PINID_SSP1_DETECT STMP3XXX_PINID(2, 1)
+#define PINID_SSP1_DATA0 STMP3XXX_PINID(2, 2)
+#define PINID_SSP1_DATA1 STMP3XXX_PINID(2, 3)
+#define PINID_SSP1_DATA2 STMP3XXX_PINID(2, 4)
+#define PINID_SSP1_DATA3 STMP3XXX_PINID(2, 5)
+#define PINID_SSP1_SCK STMP3XXX_PINID(2, 6)
+#define PINID_ROTARYA STMP3XXX_PINID(2, 7)
+#define PINID_ROTARYB STMP3XXX_PINID(2, 8)
+#define PINID_EMI_A00 STMP3XXX_PINID(2, 9)
+#define PINID_EMI_A01 STMP3XXX_PINID(2, 10)
+#define PINID_EMI_A02 STMP3XXX_PINID(2, 11)
+#define PINID_EMI_A03 STMP3XXX_PINID(2, 12)
+#define PINID_EMI_A04 STMP3XXX_PINID(2, 13)
+#define PINID_EMI_A05 STMP3XXX_PINID(2, 14)
+#define PINID_EMI_A06 STMP3XXX_PINID(2, 15)
+#define PINID_EMI_A07 STMP3XXX_PINID(2, 16)
+#define PINID_EMI_A08 STMP3XXX_PINID(2, 17)
+#define PINID_EMI_A09 STMP3XXX_PINID(2, 18)
+#define PINID_EMI_A10 STMP3XXX_PINID(2, 19)
+#define PINID_EMI_A11 STMP3XXX_PINID(2, 20)
+#define PINID_EMI_A12 STMP3XXX_PINID(2, 21)
+#define PINID_EMI_BA0 STMP3XXX_PINID(2, 22)
+#define PINID_EMI_BA1 STMP3XXX_PINID(2, 23)
+#define PINID_EMI_CASN STMP3XXX_PINID(2, 24)
+#define PINID_EMI_CE0N STMP3XXX_PINID(2, 25)
+#define PINID_EMI_CE1N STMP3XXX_PINID(2, 26)
+#define PINID_GPMI_CE1N STMP3XXX_PINID(2, 27)
+#define PINID_GPMI_CE0N STMP3XXX_PINID(2, 28)
+#define PINID_EMI_CKE STMP3XXX_PINID(2, 29)
+#define PINID_EMI_RASN STMP3XXX_PINID(2, 30)
+#define PINID_EMI_WEN STMP3XXX_PINID(2, 31)
+
+/* Bank 3 */
+#define PINID_EMI_D00 STMP3XXX_PINID(3, 0)
+#define PINID_EMI_D01 STMP3XXX_PINID(3, 1)
+#define PINID_EMI_D02 STMP3XXX_PINID(3, 2)
+#define PINID_EMI_D03 STMP3XXX_PINID(3, 3)
+#define PINID_EMI_D04 STMP3XXX_PINID(3, 4)
+#define PINID_EMI_D05 STMP3XXX_PINID(3, 5)
+#define PINID_EMI_D06 STMP3XXX_PINID(3, 6)
+#define PINID_EMI_D07 STMP3XXX_PINID(3, 7)
+#define PINID_EMI_D08 STMP3XXX_PINID(3, 8)
+#define PINID_EMI_D09 STMP3XXX_PINID(3, 9)
+#define PINID_EMI_D10 STMP3XXX_PINID(3, 10)
+#define PINID_EMI_D11 STMP3XXX_PINID(3, 11)
+#define PINID_EMI_D12 STMP3XXX_PINID(3, 12)
+#define PINID_EMI_D13 STMP3XXX_PINID(3, 13)
+#define PINID_EMI_D14 STMP3XXX_PINID(3, 14)
+#define PINID_EMI_D15 STMP3XXX_PINID(3, 15)
+#define PINID_EMI_DQM0 STMP3XXX_PINID(3, 16)
+#define PINID_EMI_DQM1 STMP3XXX_PINID(3, 17)
+#define PINID_EMI_DQS0 STMP3XXX_PINID(3, 18)
+#define PINID_EMI_DQS1 STMP3XXX_PINID(3, 19)
+#define PINID_EMI_CLK STMP3XXX_PINID(3, 20)
+#define PINID_EMI_CLKN STMP3XXX_PINID(3, 21)
+
+#endif /* __ASM_ARCH_PINS_H */
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbh.h b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h
new file mode 100644
index 0000000..dbcf85b
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-apbh.h
@@ -0,0 +1,101 @@
+/*
+ * stmp378x: APBH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBH
+#define _MACH_REGS_APBH
+
+#define REGS_APBH_BASE (STMP3XXX_REGS_BASE + 0x4000)
+#define REGS_APBH_PHYS 0x80004000
+#define REGS_APBH_SIZE 0x2000
+
+#define HW_APBH_CTRL0 0x0
+#define BM_APBH_CTRL0_RESET_CHANNEL 0x00FF0000
+#define BP_APBH_CTRL0_RESET_CHANNEL 16
+#define BM_APBH_CTRL0_CLKGATE 0x40000000
+#define BM_APBH_CTRL0_SFTRST 0x80000000
+
+#define HW_APBH_CTRL1 0x10
+#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0x00000001
+#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0
+
+#define HW_APBH_CTRL2 0x20
+
+#define HW_APBH_DEVSEL 0x30
+
+#define HW_APBH_CH0_NXTCMDAR (0x50 + 0 * 0x70)
+#define HW_APBH_CH1_NXTCMDAR (0x50 + 1 * 0x70)
+#define HW_APBH_CH2_NXTCMDAR (0x50 + 2 * 0x70)
+#define HW_APBH_CH3_NXTCMDAR (0x50 + 3 * 0x70)
+#define HW_APBH_CH4_NXTCMDAR (0x50 + 4 * 0x70)
+#define HW_APBH_CH5_NXTCMDAR (0x50 + 5 * 0x70)
+#define HW_APBH_CH6_NXTCMDAR (0x50 + 6 * 0x70)
+#define HW_APBH_CH7_NXTCMDAR (0x50 + 7 * 0x70)
+#define HW_APBH_CH8_NXTCMDAR (0x50 + 8 * 0x70)
+#define HW_APBH_CH9_NXTCMDAR (0x50 + 9 * 0x70)
+#define HW_APBH_CH10_NXTCMDAR (0x50 + 10 * 0x70)
+#define HW_APBH_CH11_NXTCMDAR (0x50 + 11 * 0x70)
+#define HW_APBH_CH12_NXTCMDAR (0x50 + 12 * 0x70)
+#define HW_APBH_CH13_NXTCMDAR (0x50 + 13 * 0x70)
+#define HW_APBH_CH14_NXTCMDAR (0x50 + 14 * 0x70)
+#define HW_APBH_CH15_NXTCMDAR (0x50 + 15 * 0x70)
+
+#define HW_APBH_CHn_NXTCMDAR 0x50
+
+#define BV_APBH_CHn_CMD_COMMAND__NO_DMA_XFER 0
+#define BV_APBH_CHn_CMD_COMMAND__DMA_WRITE 1
+#define BV_APBH_CHn_CMD_COMMAND__DMA_READ 2
+#define BV_APBH_CHn_CMD_COMMAND__DMA_SENSE 3
+#define BM_APBH_CHn_CMD_COMMAND 0x00000003
+#define BP_APBH_CHn_CMD_COMMAND 0
+#define BM_APBH_CHn_CMD_CHAIN 0x00000004
+#define BM_APBH_CHn_CMD_IRQONCMPLT 0x00000008
+#define BM_APBH_CHn_CMD_NANDLOCK 0x00000010
+#define BM_APBH_CHn_CMD_NANDWAIT4READY 0x00000020
+#define BM_APBH_CHn_CMD_SEMAPHORE 0x00000040
+#define BM_APBH_CHn_CMD_WAIT4ENDCMD 0x00000080
+#define BM_APBH_CHn_CMD_CMDWORDS 0x0000F000
+#define BP_APBH_CHn_CMD_CMDWORDS 12
+#define BM_APBH_CHn_CMD_XFER_COUNT 0xFFFF0000
+#define BP_APBH_CHn_CMD_XFER_COUNT 16
+
+#define HW_APBH_CH0_SEMA (0x80 + 0 * 0x70)
+#define HW_APBH_CH1_SEMA (0x80 + 1 * 0x70)
+#define HW_APBH_CH2_SEMA (0x80 + 2 * 0x70)
+#define HW_APBH_CH3_SEMA (0x80 + 3 * 0x70)
+#define HW_APBH_CH4_SEMA (0x80 + 4 * 0x70)
+#define HW_APBH_CH5_SEMA (0x80 + 5 * 0x70)
+#define HW_APBH_CH6_SEMA (0x80 + 6 * 0x70)
+#define HW_APBH_CH7_SEMA (0x80 + 7 * 0x70)
+#define HW_APBH_CH8_SEMA (0x80 + 8 * 0x70)
+#define HW_APBH_CH9_SEMA (0x80 + 9 * 0x70)
+#define HW_APBH_CH10_SEMA (0x80 + 10 * 0x70)
+#define HW_APBH_CH11_SEMA (0x80 + 11 * 0x70)
+#define HW_APBH_CH12_SEMA (0x80 + 12 * 0x70)
+#define HW_APBH_CH13_SEMA (0x80 + 13 * 0x70)
+#define HW_APBH_CH14_SEMA (0x80 + 14 * 0x70)
+#define HW_APBH_CH15_SEMA (0x80 + 15 * 0x70)
+
+#define HW_APBH_CHn_SEMA 0x80
+#define BM_APBH_CHn_SEMA_INCREMENT_SEMA 0x000000FF
+#define BP_APBH_CHn_SEMA_INCREMENT_SEMA 0
+#define BM_APBH_CHn_SEMA_PHORE 0x00FF0000
+#define BP_APBH_CHn_SEMA_PHORE 16
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-apbx.h b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h
new file mode 100644
index 0000000..3b934a4
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-apbx.h
@@ -0,0 +1,119 @@
+/*
+ * stmp378x: APBX register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBX
+#define _MACH_REGS_APBX
+
+#define REGS_APBX_BASE (STMP3XXX_REGS_BASE + 0x24000)
+#define REGS_APBX_PHYS 0x80024000
+#define REGS_APBX_SIZE 0x2000
+
+#define HW_APBX_CTRL0 0x0
+#define BM_APBX_CTRL0_CLKGATE 0x40000000
+#define BM_APBX_CTRL0_SFTRST 0x80000000
+
+#define HW_APBX_CTRL1 0x10
+
+#define HW_APBX_CTRL2 0x20
+
+#define HW_APBX_CHANNEL_CTRL 0x30
+#define BM_APBX_CHANNEL_CTRL_RESET_CHANNEL 0xFFFF0000
+#define BP_APBX_CHANNEL_CTRL_RESET_CHANNEL 16
+
+#define HW_APBX_DEVSEL 0x40
+
+#define HW_APBX_CH0_NXTCMDAR (0x110 + 0 * 0x70)
+#define HW_APBX_CH1_NXTCMDAR (0x110 + 1 * 0x70)
+#define HW_APBX_CH2_NXTCMDAR (0x110 + 2 * 0x70)
+#define HW_APBX_CH3_NXTCMDAR (0x110 + 3 * 0x70)
+#define HW_APBX_CH4_NXTCMDAR (0x110 + 4 * 0x70)
+#define HW_APBX_CH5_NXTCMDAR (0x110 + 5 * 0x70)
+#define HW_APBX_CH6_NXTCMDAR (0x110 + 6 * 0x70)
+#define HW_APBX_CH7_NXTCMDAR (0x110 + 7 * 0x70)
+#define HW_APBX_CH8_NXTCMDAR (0x110 + 8 * 0x70)
+#define HW_APBX_CH9_NXTCMDAR (0x110 + 9 * 0x70)
+#define HW_APBX_CH10_NXTCMDAR (0x110 + 10 * 0x70)
+#define HW_APBX_CH11_NXTCMDAR (0x110 + 11 * 0x70)
+#define HW_APBX_CH12_NXTCMDAR (0x110 + 12 * 0x70)
+#define HW_APBX_CH13_NXTCMDAR (0x110 + 13 * 0x70)
+#define HW_APBX_CH14_NXTCMDAR (0x110 + 14 * 0x70)
+#define HW_APBX_CH15_NXTCMDAR (0x110 + 15 * 0x70)
+
+#define HW_APBX_CHn_NXTCMDAR 0x110
+#define BM_APBX_CHn_CMD_COMMAND 0x00000003
+#define BP_APBX_CHn_CMD_COMMAND 0
+#define BV_APBX_CHn_CMD_COMMAND__NO_DMA_XFER 0
+#define BV_APBX_CHn_CMD_COMMAND__DMA_WRITE 1
+#define BV_APBX_CHn_CMD_COMMAND__DMA_READ 2
+#define BV_APBX_CHn_CMD_COMMAND__DMA_SENSE 3
+#define BM_APBX_CHn_CMD_CHAIN 0x00000004
+#define BM_APBX_CHn_CMD_IRQONCMPLT 0x00000008
+#define BM_APBX_CHn_CMD_SEMAPHORE 0x00000040
+#define BM_APBX_CHn_CMD_WAIT4ENDCMD 0x00000080
+#define BM_APBX_CHn_CMD_HALTONTERMINATE 0x00000100
+#define BM_APBX_CHn_CMD_CMDWORDS 0x0000F000
+#define BP_APBX_CHn_CMD_CMDWORDS 12
+#define BM_APBX_CHn_CMD_XFER_COUNT 0xFFFF0000
+#define BP_APBX_CHn_CMD_XFER_COUNT 16
+
+#define HW_APBX_CH0_BAR (0x130 + 0 * 0x70)
+#define HW_APBX_CH1_BAR (0x130 + 1 * 0x70)
+#define HW_APBX_CH2_BAR (0x130 + 2 * 0x70)
+#define HW_APBX_CH3_BAR (0x130 + 3 * 0x70)
+#define HW_APBX_CH4_BAR (0x130 + 4 * 0x70)
+#define HW_APBX_CH5_BAR (0x130 + 5 * 0x70)
+#define HW_APBX_CH6_BAR (0x130 + 6 * 0x70)
+#define HW_APBX_CH7_BAR (0x130 + 7 * 0x70)
+#define HW_APBX_CH8_BAR (0x130 + 8 * 0x70)
+#define HW_APBX_CH9_BAR (0x130 + 9 * 0x70)
+#define HW_APBX_CH10_BAR (0x130 + 10 * 0x70)
+#define HW_APBX_CH11_BAR (0x130 + 11 * 0x70)
+#define HW_APBX_CH12_BAR (0x130 + 12 * 0x70)
+#define HW_APBX_CH13_BAR (0x130 + 13 * 0x70)
+#define HW_APBX_CH14_BAR (0x130 + 14 * 0x70)
+#define HW_APBX_CH15_BAR (0x130 + 15 * 0x70)
+
+#define HW_APBX_CHn_BAR 0x130
+
+#define HW_APBX_CH0_SEMA (0x140 + 0 * 0x70)
+#define HW_APBX_CH1_SEMA (0x140 + 1 * 0x70)
+#define HW_APBX_CH2_SEMA (0x140 + 2 * 0x70)
+#define HW_APBX_CH3_SEMA (0x140 + 3 * 0x70)
+#define HW_APBX_CH4_SEMA (0x140 + 4 * 0x70)
+#define HW_APBX_CH5_SEMA (0x140 + 5 * 0x70)
+#define HW_APBX_CH6_SEMA (0x140 + 6 * 0x70)
+#define HW_APBX_CH7_SEMA (0x140 + 7 * 0x70)
+#define HW_APBX_CH8_SEMA (0x140 + 8 * 0x70)
+#define HW_APBX_CH9_SEMA (0x140 + 9 * 0x70)
+#define HW_APBX_CH10_SEMA (0x140 + 10 * 0x70)
+#define HW_APBX_CH11_SEMA (0x140 + 11 * 0x70)
+#define HW_APBX_CH12_SEMA (0x140 + 12 * 0x70)
+#define HW_APBX_CH13_SEMA (0x140 + 13 * 0x70)
+#define HW_APBX_CH14_SEMA (0x140 + 14 * 0x70)
+#define HW_APBX_CH15_SEMA (0x140 + 15 * 0x70)
+
+#define HW_APBX_CHn_SEMA 0x140
+#define BM_APBX_CHn_SEMA_INCREMENT_SEMA 0x000000FF
+#define BP_APBX_CHn_SEMA_INCREMENT_SEMA 0
+#define BM_APBX_CHn_SEMA_PHORE 0x00FF0000
+#define BP_APBX_CHn_SEMA_PHORE 16
+
+#endif
+
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioin.h b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h
new file mode 100644
index 0000000..641ac61
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-audioin.h
@@ -0,0 +1,63 @@
+/*
+ * stmp378x: AUDIOIN register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_AUDIOIN_BASE (STMP3XXX_REGS_BASE + 0x4C000)
+#define REGS_AUDIOIN_PHYS 0x8004C000
+#define REGS_AUDIOIN_SIZE 0x2000
+
+#define HW_AUDIOIN_CTRL 0x0
+#define BM_AUDIOIN_CTRL_RUN 0x00000001
+#define BP_AUDIOIN_CTRL_RUN 0
+#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
+#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
+#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
+#define BM_AUDIOIN_CTRL_WORD_LENGTH 0x00000020
+#define BM_AUDIOIN_CTRL_CLKGATE 0x40000000
+#define BM_AUDIOIN_CTRL_SFTRST 0x80000000
+
+#define HW_AUDIOIN_STAT 0x10
+
+#define HW_AUDIOIN_ADCSRR 0x20
+
+#define HW_AUDIOIN_ADCVOLUME 0x30
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0x000000FF
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT 0x00FF0000
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT 16
+
+#define HW_AUDIOIN_ADCDEBUG 0x40
+
+#define HW_AUDIOIN_ADCVOL 0x50
+#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT 0x0000000F
+#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT 0
+#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT 0x00000030
+#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT 4
+#define BM_AUDIOIN_ADCVOL_GAIN_LEFT 0x00000F00
+#define BP_AUDIOIN_ADCVOL_GAIN_LEFT 8
+#define BM_AUDIOIN_ADCVOL_SELECT_LEFT 0x00003000
+#define BP_AUDIOIN_ADCVOL_SELECT_LEFT 12
+#define BM_AUDIOIN_ADCVOL_MUTE 0x01000000
+
+#define HW_AUDIOIN_MICLINE 0x60
+
+#define HW_AUDIOIN_ANACLKCTRL 0x70
+#define BM_AUDIOIN_ANACLKCTRL_CLKGATE 0x80000000
+
+#define HW_AUDIOIN_DATA 0x80
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-audioout.h b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h
new file mode 100644
index 0000000..f533e23
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-audioout.h
@@ -0,0 +1,104 @@
+/*
+ * stmp378x: AUDIOOUT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_AUDIOOUT_BASE (STMP3XXX_REGS_BASE + 0x48000)
+#define REGS_AUDIOOUT_PHYS 0x80048000
+#define REGS_AUDIOOUT_SIZE 0x2000
+
+#define HW_AUDIOOUT_CTRL 0x0
+#define BM_AUDIOOUT_CTRL_RUN 0x00000001
+#define BP_AUDIOOUT_CTRL_RUN 0
+#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
+#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
+#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
+#define BM_AUDIOOUT_CTRL_WORD_LENGTH 0x00000040
+#define BM_AUDIOOUT_CTRL_CLKGATE 0x40000000
+#define BM_AUDIOOUT_CTRL_SFTRST 0x80000000
+
+#define HW_AUDIOOUT_STAT 0x10
+
+#define HW_AUDIOOUT_DACSRR 0x20
+#define BM_AUDIOOUT_DACSRR_SRC_FRAC 0x00001FFF
+#define BP_AUDIOOUT_DACSRR_SRC_FRAC 0
+#define BM_AUDIOOUT_DACSRR_SRC_INT 0x001F0000
+#define BP_AUDIOOUT_DACSRR_SRC_INT 16
+#define BM_AUDIOOUT_DACSRR_SRC_HOLD 0x07000000
+#define BP_AUDIOOUT_DACSRR_SRC_HOLD 24
+#define BM_AUDIOOUT_DACSRR_BASEMULT 0x70000000
+#define BP_AUDIOOUT_DACSRR_BASEMULT 28
+
+#define HW_AUDIOOUT_DACVOLUME 0x30
+#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT 0x00000100
+#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT 0x01000000
+#define BM_AUDIOOUT_DACVOLUME_EN_ZCD 0x02000000
+
+#define HW_AUDIOOUT_DACDEBUG 0x40
+
+#define HW_AUDIOOUT_HPVOL 0x50
+#define BM_AUDIOOUT_HPVOL_MUTE 0x01000000
+#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD 0x02000000
+
+#define HW_AUDIOOUT_PWRDN 0x70
+#define BM_AUDIOOUT_PWRDN_HEADPHONE 0x00000001
+#define BP_AUDIOOUT_PWRDN_HEADPHONE 0
+#define BM_AUDIOOUT_PWRDN_CAPLESS 0x00000010
+#define BM_AUDIOOUT_PWRDN_ADC 0x00000100
+#define BM_AUDIOOUT_PWRDN_DAC 0x00001000
+#define BM_AUDIOOUT_PWRDN_RIGHT_ADC 0x00010000
+#define BM_AUDIOOUT_PWRDN_SPEAKER 0x01000000
+
+#define HW_AUDIOOUT_REFCTRL 0x80
+#define BM_AUDIOOUT_REFCTRL_VAG_VAL 0x000000F0
+#define BP_AUDIOOUT_REFCTRL_VAG_VAL 4
+#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL 0x00000F00
+#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL 8
+#define BM_AUDIOOUT_REFCTRL_ADJ_VAG 0x00001000
+#define BM_AUDIOOUT_REFCTRL_ADJ_ADC 0x00002000
+#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL 0x00030000
+#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL 16
+#define BM_AUDIOOUT_REFCTRL_LOW_PWR 0x00080000
+#define BM_AUDIOOUT_REFCTRL_VBG_ADJ 0x00700000
+#define BP_AUDIOOUT_REFCTRL_VBG_ADJ 20
+#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS 0x01000000
+#define BM_AUDIOOUT_REFCTRL_RAISE_REF 0x02000000
+
+#define HW_AUDIOOUT_ANACTRL 0x90
+#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB 0x00000010
+#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND 0x00000020
+
+#define HW_AUDIOOUT_TEST 0xA0
+#define BM_AUDIOOUT_TEST_HP_I1_ADJ 0x00C00000
+#define BP_AUDIOOUT_TEST_HP_I1_ADJ 22
+
+#define HW_AUDIOOUT_BISTCTRL 0xB0
+
+#define HW_AUDIOOUT_BISTSTAT0 0xC0
+
+#define HW_AUDIOOUT_BISTSTAT1 0xD0
+
+#define HW_AUDIOOUT_ANACLKCTRL 0xE0
+#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE 0x80000000
+
+#define HW_AUDIOOUT_DATA 0xF0
+
+#define HW_AUDIOOUT_SPEAKERCTRL 0x100
+#define BM_AUDIOOUT_SPEAKERCTRL_MUTE 0x01000000
+
+#define HW_AUDIOOUT_VERSION 0x200
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-bch.h b/arch/arm/mach-stmp378x/include/mach/regs-bch.h
new file mode 100644
index 0000000..532d246
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-bch.h
@@ -0,0 +1,56 @@
+/*
+ * stmp378x: BCH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_BCH_BASE (STMP3XXX_REGS_BASE + 0xA000)
+#define REGS_BCH_PHYS 0x8000A000
+#define REGS_BCH_SIZE 0x2000
+
+#define HW_BCH_CTRL 0x0
+#define BM_BCH_CTRL_COMPLETE_IRQ 0x00000001
+#define BP_BCH_CTRL_COMPLETE_IRQ 0
+#define BM_BCH_CTRL_COMPLETE_IRQ_EN 0x00000100
+
+#define HW_BCH_STATUS0 0x10
+#define BM_BCH_STATUS0_UNCORRECTABLE 0x00000004
+#define BM_BCH_STATUS0_CORRECTED 0x00000008
+#define BM_BCH_STATUS0_STATUS_BLK0 0x0000FF00
+#define BP_BCH_STATUS0_STATUS_BLK0 8
+#define BM_BCH_STATUS0_COMPLETED_CE 0x000F0000
+#define BP_BCH_STATUS0_COMPLETED_CE 16
+
+#define HW_BCH_LAYOUTSELECT 0x70
+
+#define HW_BCH_FLASH0LAYOUT0 0x80
+#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE 0x00000FFF
+#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0
+#define BM_BCH_FLASH0LAYOUT0_ECC0 0x0000F000
+#define BP_BCH_FLASH0LAYOUT0_ECC0 12
+#define BM_BCH_FLASH0LAYOUT0_META_SIZE 0x00FF0000
+#define BP_BCH_FLASH0LAYOUT0_META_SIZE 16
+#define BM_BCH_FLASH0LAYOUT0_NBLOCKS 0xFF000000
+#define BP_BCH_FLASH0LAYOUT0_NBLOCKS 24
+#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE 0x00000FFF
+#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0
+#define BM_BCH_FLASH0LAYOUT1_ECCN 0x0000F000
+#define BP_BCH_FLASH0LAYOUT1_ECCN 12
+#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE 0xFFFF0000
+#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE 16
+
+#define HW_BCH_BLOCKNAME 0x150
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
new file mode 100644
index 0000000..7c546af
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-clkctrl.h
@@ -0,0 +1,88 @@
+/*
+ * stmp378x: CLKCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _MACH_REGS_CLKCTRL
+#define _MACH_REGS_CLKCTRL
+
+#define REGS_CLKCTRL_BASE (STMP3XXX_REGS_BASE + 0x40000)
+#define REGS_CLKCTRL_PHYS 0x80040000
+#define REGS_CLKCTRL_SIZE 0x2000
+
+#define HW_CLKCTRL_PLLCTRL0 0x0
+#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000
+
+#define HW_CLKCTRL_CPU 0x20
+#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F
+#define BP_CLKCTRL_CPU_DIV_CPU 0
+
+#define HW_CLKCTRL_HBUS 0x30
+#define BM_CLKCTRL_HBUS_DIV 0x0000001F
+#define BP_CLKCTRL_HBUS_DIV 0
+#define BM_CLKCTRL_HBUS_DIV_FRAC_EN 0x00000020
+
+#define HW_CLKCTRL_XBUS 0x40
+
+#define HW_CLKCTRL_XTAL 0x50
+#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE 0x10000000
+
+#define HW_CLKCTRL_PIX 0x60
+#define BM_CLKCTRL_PIX_DIV 0x00000FFF
+#define BP_CLKCTRL_PIX_DIV 0
+#define BM_CLKCTRL_PIX_CLKGATE 0x80000000
+
+#define HW_CLKCTRL_SSP 0x70
+
+#define HW_CLKCTRL_GPMI 0x80
+
+#define HW_CLKCTRL_SPDIF 0x90
+
+#define HW_CLKCTRL_EMI 0xA0
+#define BM_CLKCTRL_EMI_DIV_EMI 0x0000003F
+#define BP_CLKCTRL_EMI_DIV_EMI 0
+#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE 0x00010000
+#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC 0x00020000
+#define BM_CLKCTRL_EMI_BUSY_REF_EMI 0x10000000
+#define BM_CLKCTRL_EMI_BUSY_REF_XTAL 0x20000000
+
+#define HW_CLKCTRL_IR 0xB0
+
+#define HW_CLKCTRL_SAIF 0xC0
+
+#define HW_CLKCTRL_TV 0xD0
+
+#define HW_CLKCTRL_ETM 0xE0
+
+#define HW_CLKCTRL_FRAC 0xF0
+#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00
+#define BP_CLKCTRL_FRAC_EMIFRAC 8
+#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000
+#define BP_CLKCTRL_FRAC_PIXFRAC 16
+#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000
+
+#define HW_CLKCTRL_FRAC1 0x100
+
+#define HW_CLKCTRL_CLKSEQ 0x110
+#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002
+
+#define HW_CLKCTRL_RESET 0x120
+#define BM_CLKCTRL_RESET_DIG 0x00000001
+#define BP_CLKCTRL_RESET_DIG 0
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dcp.h b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h
new file mode 100644
index 0000000..fdedd00
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-dcp.h
@@ -0,0 +1,87 @@
+/*
+ * stmp378x: DCP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_DCP_BASE (STMP3XXX_REGS_BASE + 0x28000)
+#define REGS_DCP_PHYS 0x80028000
+#define REGS_DCP_SIZE 0x2000
+
+#define HW_DCP_CTRL 0x0
+#define BM_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE 0x000000FF
+#define BP_DCP_CTRL_CHANNEL_INTERRUPT_ENABLE 0
+#define BM_DCP_CTRL_ENABLE_CONTEXT_CACHING 0x00400000
+#define BM_DCP_CTRL_GATHER_RESIDUAL_WRITES 0x00800000
+#define BM_DCP_CTRL_CLKGATE 0x40000000
+#define BM_DCP_CTRL_SFTRST 0x80000000
+
+#define HW_DCP_STAT 0x10
+#define BM_DCP_STAT_IRQ 0x0000000F
+#define BP_DCP_STAT_IRQ 0
+
+#define HW_DCP_CHANNELCTRL 0x20
+#define BM_DCP_CHANNELCTRL_ENABLE_CHANNEL 0x000000FF
+#define BP_DCP_CHANNELCTRL_ENABLE_CHANNEL 0
+
+#define HW_DCP_CONTEXT 0x50
+#define BM_DCP_PACKET1_INTERRUPT 0x00000001
+#define BP_DCP_PACKET1_INTERRUPT 0
+#define BM_DCP_PACKET1_DECR_SEMAPHORE 0x00000002
+#define BM_DCP_PACKET1_CHAIN 0x00000004
+#define BM_DCP_PACKET1_CHAIN_CONTIGUOUS 0x00000008
+#define BM_DCP_PACKET1_ENABLE_CIPHER 0x00000020
+#define BM_DCP_PACKET1_ENABLE_HASH 0x00000040
+#define BM_DCP_PACKET1_CIPHER_ENCRYPT 0x00000100
+#define BM_DCP_PACKET1_CIPHER_INIT 0x00000200
+#define BM_DCP_PACKET1_OTP_KEY 0x00000400
+#define BM_DCP_PACKET1_PAYLOAD_KEY 0x00000800
+#define BM_DCP_PACKET1_HASH_INIT 0x00001000
+#define BM_DCP_PACKET1_HASH_TERM 0x00002000
+#define BM_DCP_PACKET2_CIPHER_SELECT 0x0000000F
+#define BP_DCP_PACKET2_CIPHER_SELECT 0
+#define BM_DCP_PACKET2_CIPHER_MODE 0x000000F0
+#define BP_DCP_PACKET2_CIPHER_MODE 4
+#define BM_DCP_PACKET2_KEY_SELECT 0x0000FF00
+#define BP_DCP_PACKET2_KEY_SELECT 8
+#define BM_DCP_PACKET2_HASH_SELECT 0x000F0000
+#define BP_DCP_PACKET2_HASH_SELECT 16
+#define BM_DCP_PACKET2_CIPHER_CFG 0xFF000000
+#define BP_DCP_PACKET2_CIPHER_CFG 24
+
+#define HW_DCP_CH0CMDPTR (0x100 + 0 * 0x40)
+#define HW_DCP_CH1CMDPTR (0x100 + 1 * 0x40)
+#define HW_DCP_CH2CMDPTR (0x100 + 2 * 0x40)
+#define HW_DCP_CH3CMDPTR (0x100 + 3 * 0x40)
+
+#define HW_DCP_CHnCMDPTR 0x100
+
+#define HW_DCP_CH0SEMA (0x110 + 0 * 0x40)
+#define HW_DCP_CH1SEMA (0x110 + 1 * 0x40)
+#define HW_DCP_CH2SEMA (0x110 + 2 * 0x40)
+#define HW_DCP_CH3SEMA (0x110 + 3 * 0x40)
+
+#define HW_DCP_CHnSEMA 0x110
+#define BM_DCP_CHnSEMA_INCREMENT 0x000000FF
+#define BP_DCP_CHnSEMA_INCREMENT 0
+
+#define HW_DCP_CH0STAT (0x120 + 0 * 0x40)
+#define HW_DCP_CH1STAT (0x120 + 1 * 0x40)
+#define HW_DCP_CH2STAT (0x120 + 2 * 0x40)
+#define HW_DCP_CH3STAT (0x120 + 3 * 0x40)
+
+#define HW_DCP_CHnSTAT 0x120
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-digctl.h b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h
new file mode 100644
index 0000000..5293005
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-digctl.h
@@ -0,0 +1,38 @@
+/*
+ * stmp378x: DIGCTL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_DIGCTL_BASE (STMP3XXX_REGS_BASE + 0x1C000)
+#define REGS_DIGCTL_PHYS 0x8001C000
+#define REGS_DIGCTL_SIZE 0x2000
+
+#define HW_DIGCTL_CTRL 0x0
+#define BM_DIGCTL_CTRL_USB_CLKGATE 0x00000004
+
+#define HW_DIGCTL_ARMCACHE 0x2B0
+#define BM_DIGCTL_ARMCACHE_ITAG_SS 0x00000003
+#define BP_DIGCTL_ARMCACHE_ITAG_SS 0
+#define BM_DIGCTL_ARMCACHE_DTAG_SS 0x00000030
+#define BP_DIGCTL_ARMCACHE_DTAG_SS 4
+#define BM_DIGCTL_ARMCACHE_CACHE_SS 0x00000300
+#define BP_DIGCTL_ARMCACHE_CACHE_SS 8
+#define BM_DIGCTL_ARMCACHE_DRTY_SS 0x00003000
+#define BP_DIGCTL_ARMCACHE_DRTY_SS 12
+#define BM_DIGCTL_ARMCACHE_VALID_SS 0x00030000
+#define BP_DIGCTL_ARMCACHE_VALID_SS 16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dram.h b/arch/arm/mach-stmp378x/include/mach/regs-dram.h
new file mode 100644
index 0000000..0285143
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-dram.h
@@ -0,0 +1,27 @@
+/*
+ * stmp378x: DRAM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_DRAM_BASE (STMP3XXX_REGS_BASE + 0xE0000)
+#define REGS_DRAM_PHYS 0x800E0000
+#define REGS_DRAM_SIZE 0x2000
+
+#define HW_DRAM_CTL06 0x18
+
+#define HW_DRAM_CTL08 0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-dri.h b/arch/arm/mach-stmp378x/include/mach/regs-dri.h
new file mode 100644
index 0000000..da25f7e
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-dri.h
@@ -0,0 +1,45 @@
+/*
+ * stmp378x: DRI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_DRI_BASE (STMP3XXX_REGS_BASE + 0x74000)
+#define REGS_DRI_PHYS 0x80074000
+#define REGS_DRI_SIZE 0x2000
+
+#define HW_DRI_CTRL 0x0
+#define BM_DRI_CTRL_RUN 0x00000001
+#define BP_DRI_CTRL_RUN 0
+#define BM_DRI_CTRL_ATTENTION_IRQ 0x00000002
+#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ 0x00000004
+#define BM_DRI_CTRL_OVERFLOW_IRQ 0x00000008
+#define BM_DRI_CTRL_ATTENTION_IRQ_EN 0x00000200
+#define BM_DRI_CTRL_PILOT_SYNC_LOSS_IRQ_EN 0x00000400
+#define BM_DRI_CTRL_OVERFLOW_IRQ_EN 0x00000800
+#define BM_DRI_CTRL_REACQUIRE_PHASE 0x00008000
+#define BM_DRI_CTRL_STOP_ON_PILOT_ERROR 0x02000000
+#define BM_DRI_CTRL_STOP_ON_OFLOW_ERROR 0x04000000
+#define BM_DRI_CTRL_ENABLE_INPUTS 0x20000000
+#define BM_DRI_CTRL_CLKGATE 0x40000000
+#define BM_DRI_CTRL_SFTRST 0x80000000
+
+#define HW_DRI_TIMING 0x10
+#define BM_DRI_TIMING_GAP_DETECTION_INTERVAL 0x000000FF
+#define BP_DRI_TIMING_GAP_DETECTION_INTERVAL 0
+#define BM_DRI_TIMING_PILOT_REP_RATE 0x000F0000
+#define BP_DRI_TIMING_PILOT_REP_RATE 16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
new file mode 100644
index 0000000..cc353be
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ecc8.h
@@ -0,0 +1,39 @@
+/*
+ * stmp378x: ECC8 register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_ECC8_BASE (STMP3XXX_REGS_BASE + 0x8000)
+#define REGS_ECC8_PHYS 0x80008000
+#define REGS_ECC8_SIZE 0x2000
+
+#define HW_ECC8_CTRL 0x0
+#define BM_ECC8_CTRL_COMPLETE_IRQ 0x00000001
+#define BP_ECC8_CTRL_COMPLETE_IRQ 0
+#define BM_ECC8_CTRL_COMPLETE_IRQ_EN 0x00000100
+#define BM_ECC8_CTRL_AHBM_SFTRST 0x20000000
+
+#define HW_ECC8_STATUS0 0x10
+#define BM_ECC8_STATUS0_UNCORRECTABLE 0x00000004
+#define BM_ECC8_STATUS0_CORRECTED 0x00000008
+#define BM_ECC8_STATUS0_STATUS_AUX 0x00000F00
+#define BP_ECC8_STATUS0_STATUS_AUX 8
+#define BM_ECC8_STATUS0_COMPLETED_CE 0x000F0000
+#define BP_ECC8_STATUS0_COMPLETED_CE 16
+
+#define HW_ECC8_STATUS1 0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-emi.h b/arch/arm/mach-stmp378x/include/mach/regs-emi.h
new file mode 100644
index 0000000..98773fc
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-emi.h
@@ -0,0 +1,25 @@
+/*
+ * stmp378x: EMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_EMI_BASE (STMP3XXX_REGS_BASE + 0x20000)
+#define REGS_EMI_PHYS 0x80020000
+#define REGS_EMI_SIZE 0x2000
+
+#define HW_EMI_STAT 0x10
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
new file mode 100644
index 0000000..2cc8bbe
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-gpmi.h
@@ -0,0 +1,78 @@
+/*
+ * stmp378x: GPMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_GPMI_BASE (STMP3XXX_REGS_BASE + 0xC000)
+#define REGS_GPMI_PHYS 0x8000C000
+#define REGS_GPMI_SIZE 0x2000
+
+#define HW_GPMI_CTRL0 0x0
+#define BM_GPMI_CTRL0_XFER_COUNT 0x0000FFFF
+#define BP_GPMI_CTRL0_XFER_COUNT 0
+#define BM_GPMI_CTRL0_CS 0x00300000
+#define BP_GPMI_CTRL0_CS 20
+#define BM_GPMI_CTRL0_LOCK_CS 0x00400000
+#define BM_GPMI_CTRL0_WORD_LENGTH 0x00800000
+#define BM_GPMI_CTRL0_ADDRESS 0x000E0000
+#define BP_GPMI_CTRL0_ADDRESS 17
+#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0
+#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE 0x1
+#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE 0x2
+#define BM_GPMI_CTRL0_ADDRESS_INCREMENT 0x00010000
+#define BM_GPMI_CTRL0_COMMAND_MODE 0x03000000
+#define BP_GPMI_CTRL0_COMMAND_MODE 24
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3
+#define BM_GPMI_CTRL0_RUN 0x20000000
+#define BM_GPMI_CTRL0_CLKGATE 0x40000000
+#define BM_GPMI_CTRL0_SFTRST 0x80000000
+#define BM_GPMI_ECCCTRL_BUFFER_MASK 0x000001FF
+#define BP_GPMI_ECCCTRL_BUFFER_MASK 0
+#define BM_GPMI_ECCCTRL_ENABLE_ECC 0x00001000
+#define BM_GPMI_ECCCTRL_ECC_CMD 0x00006000
+#define BP_GPMI_ECCCTRL_ECC_CMD 13
+#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_4_BIT 0
+#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_4_BIT 1
+#define BV_GPMI_ECCCTRL_ECC_CMD__DECODE_8_BIT 2
+#define BV_GPMI_ECCCTRL_ECC_CMD__ENCODE_8_BIT 3
+
+#define HW_GPMI_CTRL1 0x60
+#define BM_GPMI_CTRL1_GPMI_MODE 0x00000001
+#define BP_GPMI_CTRL1_GPMI_MODE 0
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY 0x00000004
+#define BM_GPMI_CTRL1_DEV_RESET 0x00000008
+#define BM_GPMI_CTRL1_TIMEOUT_IRQ 0x00000200
+#define BM_GPMI_CTRL1_DEV_IRQ 0x00000400
+#define BM_GPMI_CTRL1_RDN_DELAY 0x0000F000
+#define BP_GPMI_CTRL1_RDN_DELAY 12
+#define BM_GPMI_CTRL1_BCH_MODE 0x00040000
+
+#define HW_GPMI_TIMING0 0x70
+#define BM_GPMI_TIMING0_DATA_SETUP 0x000000FF
+#define BP_GPMI_TIMING0_DATA_SETUP 0
+#define BM_GPMI_TIMING0_DATA_HOLD 0x0000FF00
+#define BP_GPMI_TIMING0_DATA_HOLD 8
+#define BM_GPMI_TIMING0_ADDRESS_SETUP 0x00FF0000
+#define BP_GPMI_TIMING0_ADDRESS_SETUP 16
+
+#define HW_GPMI_TIMING1 0x80
+#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 0xFFFF0000
+#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 16
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-i2c.h b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h
new file mode 100644
index 0000000..13a234c
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-i2c.h
@@ -0,0 +1,55 @@
+/*
+ * stmp378x: I2C register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_I2C_BASE (STMP3XXX_REGS_BASE + 0x58000)
+#define REGS_I2C_PHYS 0x80058000
+#define REGS_I2C_SIZE 0x2000
+
+#define HW_I2C_CTRL0 0x0
+#define BM_I2C_CTRL0_XFER_COUNT 0x0000FFFF
+#define BP_I2C_CTRL0_XFER_COUNT 0
+#define BM_I2C_CTRL0_DIRECTION 0x00010000
+#define BM_I2C_CTRL0_MASTER_MODE 0x00020000
+#define BM_I2C_CTRL0_PRE_SEND_START 0x00080000
+#define BM_I2C_CTRL0_POST_SEND_STOP 0x00100000
+#define BM_I2C_CTRL0_RETAIN_CLOCK 0x00200000
+#define BM_I2C_CTRL0_SEND_NAK_ON_LAST 0x02000000
+#define BM_I2C_CTRL0_CLKGATE 0x40000000
+#define BM_I2C_CTRL0_SFTRST 0x80000000
+
+#define HW_I2C_TIMING0 0x10
+
+#define HW_I2C_TIMING1 0x20
+
+#define HW_I2C_TIMING2 0x30
+
+#define HW_I2C_CTRL1 0x40
+#define BM_I2C_CTRL1_SLAVE_IRQ 0x00000001
+#define BP_I2C_CTRL1_SLAVE_IRQ 0
+#define BM_I2C_CTRL1_SLAVE_STOP_IRQ 0x00000002
+#define BM_I2C_CTRL1_MASTER_LOSS_IRQ 0x00000004
+#define BM_I2C_CTRL1_EARLY_TERM_IRQ 0x00000008
+#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ 0x00000010
+#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ 0x00000020
+#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ 0x00000040
+#define BM_I2C_CTRL1_BUS_FREE_IRQ 0x00000080
+#define BM_I2C_CTRL1_CLR_GOT_A_NAK 0x10000000
+
+#define HW_I2C_VERSION 0x90
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-icoll.h b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h
new file mode 100644
index 0000000..f996e80
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-icoll.h
@@ -0,0 +1,45 @@
+/*
+ * stmp378x: ICOLL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _MACH_REGS_ICOLL
+#define _MACH_REGS_ICOLL
+
+#define REGS_ICOLL_BASE (STMP3XXX_REGS_BASE + 0x0)
+#define REGS_ICOLL_PHYS 0x80000000
+#define REGS_ICOLL_SIZE 0x2000
+
+#define HW_ICOLL_VECTOR 0x0
+
+#define HW_ICOLL_LEVELACK 0x10
+#define BM_ICOLL_LEVELACK_IRQLEVELACK 0x0000000F
+#define BP_ICOLL_LEVELACK_IRQLEVELACK 0
+
+#define HW_ICOLL_CTRL 0x20
+#define BM_ICOLL_CTRL_CLKGATE 0x40000000
+#define BM_ICOLL_CTRL_SFTRST 0x80000000
+
+#define HW_ICOLL_STAT 0x70
+
+#define HW_ICOLL_INTERRUPTn 0x120
+
+#define HW_ICOLL_INTERRUPTn 0x120
+#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-stmp378x/include/mach/regs-ir.h
index a93df7c..a5b4ef1 100644
--- a/arch/arm/mach-imx/include/mach/memory.h
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ir.h
@@ -1,8 +1,8 @@
/*
- * arch/arm/mach-imx/include/mach/memory.h
+ * stmp378x: IR register definitions
*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -16,11 +16,8 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
-
-#define PHYS_OFFSET UL(0x08000000)
-
-#endif
+#define REGS_IR_BASE (STMP3XXX_REGS_BASE + 0x78000)
+#define REGS_IR_PHYS 0x80078000
+#define REGS_IR_SIZE 0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
new file mode 100644
index 0000000..9cdbef4
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-lcdif.h
@@ -0,0 +1,195 @@
+/*
+ * stmp378x: LCDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_LCDIF_BASE (STMP3XXX_REGS_BASE + 0x30000)
+#define REGS_LCDIF_PHYS 0x80030000
+#define REGS_LCDIF_SIZE 0x2000
+
+#define HW_LCDIF_CTRL 0x0
+#define BM_LCDIF_CTRL_RUN 0x00000001
+#define BP_LCDIF_CTRL_RUN 0
+#define BM_LCDIF_CTRL_LCDIF_MASTER 0x00000020
+#define BM_LCDIF_CTRL_RGB_TO_YCBCR422_CSC 0x00000080
+#define BM_LCDIF_CTRL_WORD_LENGTH 0x00000300
+#define BP_LCDIF_CTRL_WORD_LENGTH 8
+#define BM_LCDIF_CTRL_LCD_DATABUS_WIDTH 0x00000C00
+#define BP_LCDIF_CTRL_LCD_DATABUS_WIDTH 10
+#define BM_LCDIF_CTRL_INPUT_DATA_SWIZZLE 0x0000C000
+#define BP_LCDIF_CTRL_INPUT_DATA_SWIZZLE 14
+#define BM_LCDIF_CTRL_DATA_SELECT 0x00010000
+#define BM_LCDIF_CTRL_DOTCLK_MODE 0x00020000
+#define BM_LCDIF_CTRL_VSYNC_MODE 0x00040000
+#define BM_LCDIF_CTRL_BYPASS_COUNT 0x00080000
+#define BM_LCDIF_CTRL_DVI_MODE 0x00100000
+#define BM_LCDIF_CTRL_SHIFT_NUM_BITS 0x03E00000
+#define BP_LCDIF_CTRL_SHIFT_NUM_BITS 21
+#define BM_LCDIF_CTRL_DATA_SHIFT_DIR 0x04000000
+#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE 0x08000000
+#define BM_LCDIF_CTRL_CLKGATE 0x40000000
+#define BM_LCDIF_CTRL_SFTRST 0x80000000
+
+#define HW_LCDIF_CTRL1 0x10
+#define BM_LCDIF_CTRL1_RESET 0x00000001
+#define BP_LCDIF_CTRL1_RESET 0
+#define BM_LCDIF_CTRL1_MODE86 0x00000002
+#define BM_LCDIF_CTRL1_BUSY_ENABLE 0x00000004
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ 0x00000100
+#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ 0x00000200
+#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ 0x00000400
+#define BM_LCDIF_CTRL1_OVERFLOW_IRQ 0x00000800
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN 0x00001000
+#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT 0x000F0000
+#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT 16
+#define BM_LCDIF_CTRL1_INTERLACE_FIELDS 0x00800000
+#define BM_LCDIF_CTRL1_RECOVER_ON_UNDERFLOW 0x01000000
+
+#define HW_LCDIF_TRANSFER_COUNT 0x20
+#define BM_LCDIF_TRANSFER_COUNT_H_COUNT 0x0000FFFF
+#define BP_LCDIF_TRANSFER_COUNT_H_COUNT 0
+#define BM_LCDIF_TRANSFER_COUNT_V_COUNT 0xFFFF0000
+#define BP_LCDIF_TRANSFER_COUNT_V_COUNT 16
+
+#define HW_LCDIF_CUR_BUF 0x30
+
+#define HW_LCDIF_NEXT_BUF 0x40
+
+#define HW_LCDIF_TIMING 0x60
+
+#define HW_LCDIF_VDCTRL0 0x70
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH 0x0003FFFF
+#define BP_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH 0
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT 0x00100000
+#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT 0x00200000
+#define BM_LCDIF_VDCTRL0_ENABLE_POL 0x01000000
+#define BM_LCDIF_VDCTRL0_DOTCLK_POL 0x02000000
+#define BM_LCDIF_VDCTRL0_HSYNC_POL 0x04000000
+#define BM_LCDIF_VDCTRL0_VSYNC_POL 0x08000000
+#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT 0x10000000
+#define BM_LCDIF_VDCTRL0_VSYNC_OEB 0x20000000
+
+#define HW_LCDIF_VDCTRL1 0x80
+#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD 0xFFFFFFFF
+#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD 0
+
+#define HW_LCDIF_VDCTRL2 0x90
+#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD 0x0003FFFF
+#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD 0
+#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 0xFF000000
+#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 24
+
+#define HW_LCDIF_VDCTRL3 0xA0
+#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0x0000FFFF
+#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0
+#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 0x0FFF0000
+#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 16
+
+#define HW_LCDIF_VDCTRL4 0xB0
+#define BM_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT 0x0003FFFF
+#define BP_LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT 0
+#define BM_LCDIF_VDCTRL4_SYNC_SIGNALS_ON 0x00040000
+
+#define HW_LCDIF_DVICTRL0 0xC0
+#define BM_LCDIF_DVICTRL0_V_LINES_CNT 0x000003FF
+#define BP_LCDIF_DVICTRL0_V_LINES_CNT 0
+#define BM_LCDIF_DVICTRL0_H_BLANKING_CNT 0x000FFC00
+#define BP_LCDIF_DVICTRL0_H_BLANKING_CNT 10
+#define BM_LCDIF_DVICTRL0_H_ACTIVE_CNT 0x7FF00000
+#define BP_LCDIF_DVICTRL0_H_ACTIVE_CNT 20
+
+#define HW_LCDIF_DVICTRL1 0xD0
+#define BM_LCDIF_DVICTRL1_F2_START_LINE 0x000003FF
+#define BP_LCDIF_DVICTRL1_F2_START_LINE 0
+#define BM_LCDIF_DVICTRL1_F1_END_LINE 0x000FFC00
+#define BP_LCDIF_DVICTRL1_F1_END_LINE 10
+#define BM_LCDIF_DVICTRL1_F1_START_LINE 0x3FF00000
+#define BP_LCDIF_DVICTRL1_F1_START_LINE 20
+
+#define HW_LCDIF_DVICTRL2 0xE0
+#define BM_LCDIF_DVICTRL2_V1_BLANK_END_LINE 0x000003FF
+#define BP_LCDIF_DVICTRL2_V1_BLANK_END_LINE 0
+#define BM_LCDIF_DVICTRL2_V1_BLANK_START_LINE 0x000FFC00
+#define BP_LCDIF_DVICTRL2_V1_BLANK_START_LINE 10
+#define BM_LCDIF_DVICTRL2_F2_END_LINE 0x3FF00000
+#define BP_LCDIF_DVICTRL2_F2_END_LINE 20
+
+#define HW_LCDIF_DVICTRL3 0xF0
+#define BM_LCDIF_DVICTRL3_V2_BLANK_END_LINE 0x000003FF
+#define BP_LCDIF_DVICTRL3_V2_BLANK_END_LINE 0
+#define BM_LCDIF_DVICTRL3_V2_BLANK_START_LINE 0x03FF0000
+#define BP_LCDIF_DVICTRL3_V2_BLANK_START_LINE 16
+
+#define HW_LCDIF_DVICTRL4 0x100
+#define BM_LCDIF_DVICTRL4_H_FILL_CNT 0x000000FF
+#define BP_LCDIF_DVICTRL4_H_FILL_CNT 0
+#define BM_LCDIF_DVICTRL4_CR_FILL_VALUE 0x0000FF00
+#define BP_LCDIF_DVICTRL4_CR_FILL_VALUE 8
+#define BM_LCDIF_DVICTRL4_CB_FILL_VALUE 0x00FF0000
+#define BP_LCDIF_DVICTRL4_CB_FILL_VALUE 16
+#define BM_LCDIF_DVICTRL4_Y_FILL_VALUE 0xFF000000
+#define BP_LCDIF_DVICTRL4_Y_FILL_VALUE 24
+
+#define HW_LCDIF_CSC_COEFF0 0x110
+#define BM_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER 0x00000003
+#define BP_LCDIF_CSC_COEFF0_CSC_SUBSAMPLE_FILTER 0
+#define BM_LCDIF_CSC_COEFF0_C0 0x03FF0000
+#define BP_LCDIF_CSC_COEFF0_C0 16
+
+#define HW_LCDIF_CSC_COEFF1 0x120
+#define BM_LCDIF_CSC_COEFF1_C1 0x000003FF
+#define BP_LCDIF_CSC_COEFF1_C1 0
+#define BM_LCDIF_CSC_COEFF1_C2 0x03FF0000
+#define BP_LCDIF_CSC_COEFF1_C2 16
+
+#define HW_LCDIF_CSC_COEFF2 0x130
+#define BM_LCDIF_CSC_COEFF2_C3 0x000003FF
+#define BP_LCDIF_CSC_COEFF2_C3 0
+#define BM_LCDIF_CSC_COEFF2_C4 0x03FF0000
+#define BP_LCDIF_CSC_COEFF2_C4 16
+
+#define HW_LCDIF_CSC_COEFF3 0x140
+#define BM_LCDIF_CSC_COEFF3_C5 0x000003FF
+#define BP_LCDIF_CSC_COEFF3_C5 0
+#define BM_LCDIF_CSC_COEFF3_C6 0x03FF0000
+#define BP_LCDIF_CSC_COEFF3_C6 16
+
+#define HW_LCDIF_CSC_COEFF4 0x150
+#define BM_LCDIF_CSC_COEFF4_C7 0x000003FF
+#define BP_LCDIF_CSC_COEFF4_C7 0
+#define BM_LCDIF_CSC_COEFF4_C8 0x03FF0000
+#define BP_LCDIF_CSC_COEFF4_C8 16
+
+#define HW_LCDIF_CSC_OFFSET 0x160
+#define BM_LCDIF_CSC_OFFSET_Y_OFFSET 0x000001FF
+#define BP_LCDIF_CSC_OFFSET_Y_OFFSET 0
+#define BM_LCDIF_CSC_OFFSET_CBCR_OFFSET 0x01FF0000
+#define BP_LCDIF_CSC_OFFSET_CBCR_OFFSET 16
+
+#define HW_LCDIF_CSC_LIMIT 0x170
+#define BM_LCDIF_CSC_LIMIT_Y_MAX 0x000000FF
+#define BP_LCDIF_CSC_LIMIT_Y_MAX 0
+#define BM_LCDIF_CSC_LIMIT_Y_MIN 0x0000FF00
+#define BP_LCDIF_CSC_LIMIT_Y_MIN 8
+#define BM_LCDIF_CSC_LIMIT_CBCR_MAX 0x00FF0000
+#define BP_LCDIF_CSC_LIMIT_CBCR_MAX 16
+#define BM_LCDIF_CSC_LIMIT_CBCR_MIN 0xFF000000
+#define BP_LCDIF_CSC_LIMIT_CBCR_MIN 24
+
+#define HW_LCDIF_STAT 0x1D0
+#define BM_LCDIF_STAT_TXFIFO_EMPTY 0x04000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-lradc.h b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h
new file mode 100644
index 0000000..cb8cb06
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-lradc.h
@@ -0,0 +1,99 @@
+/*
+ * stmp378x: LRADC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_LRADC_BASE (STMP3XXX_REGS_BASE + 0x50000)
+#define REGS_LRADC_PHYS 0x80050000
+#define REGS_LRADC_SIZE 0x2000
+
+#define HW_LRADC_CTRL0 0x0
+#define BM_LRADC_CTRL0_SCHEDULE 0x000000FF
+#define BP_LRADC_CTRL0_SCHEDULE 0
+#define BM_LRADC_CTRL0_XPLUS_ENABLE 0x00010000
+#define BM_LRADC_CTRL0_YPLUS_ENABLE 0x00020000
+#define BM_LRADC_CTRL0_XMINUS_ENABLE 0x00040000
+#define BM_LRADC_CTRL0_YMINUS_ENABLE 0x00080000
+#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE 0x00100000
+#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF 0x00200000
+#define BM_LRADC_CTRL0_CLKGATE 0x40000000
+#define BM_LRADC_CTRL0_SFTRST 0x80000000
+
+#define HW_LRADC_CTRL1 0x10
+#define BM_LRADC_CTRL1_LRADC0_IRQ 0x00000001
+#define BP_LRADC_CTRL1_LRADC0_IRQ 0
+#define BM_LRADC_CTRL1_LRADC5_IRQ 0x00000020
+#define BM_LRADC_CTRL1_LRADC6_IRQ 0x00000040
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ 0x00000100
+#define BM_LRADC_CTRL1_LRADC0_IRQ_EN 0x00010000
+#define BM_LRADC_CTRL1_LRADC5_IRQ_EN 0x00200000
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN 0x01000000
+
+#define HW_LRADC_CTRL2 0x20
+#define BM_LRADC_CTRL2_BL_BRIGHTNESS 0x001F0000
+#define BP_LRADC_CTRL2_BL_BRIGHTNESS 16
+#define BM_LRADC_CTRL2_BL_MUX_SELECT 0x00200000
+#define BM_LRADC_CTRL2_BL_ENABLE 0x00400000
+#define BM_LRADC_CTRL2_DIVIDE_BY_TWO 0xFF000000
+#define BP_LRADC_CTRL2_DIVIDE_BY_TWO 24
+
+#define HW_LRADC_CTRL3 0x30
+#define BM_LRADC_CTRL3_CYCLE_TIME 0x00000300
+#define BP_LRADC_CTRL3_CYCLE_TIME 8
+
+#define HW_LRADC_STATUS 0x40
+#define BM_LRADC_STATUS_TOUCH_DETECT_RAW 0x00000001
+#define BP_LRADC_STATUS_TOUCH_DETECT_RAW 0
+
+#define HW_LRADC_CH0 (0x50 + 0 * 0x10)
+#define HW_LRADC_CH1 (0x50 + 1 * 0x10)
+#define HW_LRADC_CH2 (0x50 + 2 * 0x10)
+#define HW_LRADC_CH3 (0x50 + 3 * 0x10)
+#define HW_LRADC_CH4 (0x50 + 4 * 0x10)
+#define HW_LRADC_CH5 (0x50 + 5 * 0x10)
+#define HW_LRADC_CH6 (0x50 + 6 * 0x10)
+#define HW_LRADC_CH7 (0x50 + 7 * 0x10)
+
+#define HW_LRADC_CHn 0x50
+#define BM_LRADC_CHn_VALUE 0x0003FFFF
+#define BP_LRADC_CHn_VALUE 0
+#define BM_LRADC_CHn_NUM_SAMPLES 0x1F000000
+#define BP_LRADC_CHn_NUM_SAMPLES 24
+#define BM_LRADC_CHn_ACCUMULATE 0x20000000
+
+#define HW_LRADC_DELAY0 (0xD0 + 0 * 0x10)
+#define HW_LRADC_DELAY1 (0xD0 + 1 * 0x10)
+#define HW_LRADC_DELAY2 (0xD0 + 2 * 0x10)
+#define HW_LRADC_DELAY3 (0xD0 + 3 * 0x10)
+
+#define HW_LRADC_DELAYn 0xD0
+#define BM_LRADC_DELAYn_DELAY 0x000007FF
+#define BP_LRADC_DELAYn_DELAY 0
+#define BM_LRADC_DELAYn_LOOP_COUNT 0x0000F800
+#define BP_LRADC_DELAYn_LOOP_COUNT 11
+#define BM_LRADC_DELAYn_TRIGGER_DELAYS 0x000F0000
+#define BP_LRADC_DELAYn_TRIGGER_DELAYS 16
+#define BM_LRADC_DELAYn_KICK 0x00100000
+#define BM_LRADC_DELAYn_TRIGGER_LRADCS 0xFF000000
+#define BP_LRADC_DELAYn_TRIGGER_LRADCS 24
+
+#define HW_LRADC_CTRL4 0x140
+#define BM_LRADC_CTRL4_LRADC6SELECT 0x0F000000
+#define BP_LRADC_CTRL4_LRADC6SELECT 24
+#define BM_LRADC_CTRL4_LRADC7SELECT 0xF0000000
+#define BP_LRADC_CTRL4_LRADC7SELECT 28
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
new file mode 100644
index 0000000..f0af64d
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ocotp.h
@@ -0,0 +1,40 @@
+/*
+ * stmp378x: OCOTP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_OCOTP_BASE (STMP3XXX_REGS_BASE + 0x2C000)
+#define REGS_OCOTP_PHYS 0x8002C000
+#define REGS_OCOTP_SIZE 0x2000
+
+#define HW_OCOTP_CTRL 0x0
+#define BM_OCOTP_CTRL_BUSY 0x00000100
+#define BM_OCOTP_CTRL_ERROR 0x00000200
+#define BM_OCOTP_CTRL_RD_BANK_OPEN 0x00001000
+#define BM_OCOTP_CTRL_RELOAD_SHADOWS 0x00002000
+#define BM_OCOTP_CTRL_WR_UNLOCK 0xFFFF0000
+#define BP_OCOTP_CTRL_WR_UNLOCK 16
+
+#define HW_OCOTP_DATA 0x10
+
+#define HW_OCOTP_CUST0 (0x20 + 0 * 0x10)
+#define HW_OCOTP_CUST1 (0x20 + 1 * 0x10)
+#define HW_OCOTP_CUST2 (0x20 + 2 * 0x10)
+#define HW_OCOTP_CUST3 (0x20 + 3 * 0x10)
+
+#define HW_OCOTP_CUSTn 0x20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
new file mode 100644
index 0000000..50d90ea
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-pinctrl.h
@@ -0,0 +1,90 @@
+/*
+ * stmp378x: PINCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _MACH_REGS_PINCTRL
+#define _MACH_REGS_PINCTRL
+
+#define REGS_PINCTRL_BASE (STMP3XXX_REGS_BASE + 0x18000)
+#define REGS_PINCTRL_PHYS 0x80018000
+#define REGS_PINCTRL_SIZE 0x2000
+
+#define HW_PINCTRL_MUXSEL0 0x100
+#define HW_PINCTRL_MUXSEL1 0x110
+#define HW_PINCTRL_MUXSEL2 0x120
+#define HW_PINCTRL_MUXSEL3 0x130
+#define HW_PINCTRL_MUXSEL4 0x140
+#define HW_PINCTRL_MUXSEL5 0x150
+#define HW_PINCTRL_MUXSEL6 0x160
+#define HW_PINCTRL_MUXSEL7 0x170
+
+#define HW_PINCTRL_DRIVE0 0x200
+#define HW_PINCTRL_DRIVE1 0x210
+#define HW_PINCTRL_DRIVE2 0x220
+#define HW_PINCTRL_DRIVE3 0x230
+#define HW_PINCTRL_DRIVE4 0x240
+#define HW_PINCTRL_DRIVE5 0x250
+#define HW_PINCTRL_DRIVE6 0x260
+#define HW_PINCTRL_DRIVE7 0x270
+#define HW_PINCTRL_DRIVE8 0x280
+#define HW_PINCTRL_DRIVE9 0x290
+#define HW_PINCTRL_DRIVE10 0x2A0
+#define HW_PINCTRL_DRIVE11 0x2B0
+#define HW_PINCTRL_DRIVE12 0x2C0
+#define HW_PINCTRL_DRIVE13 0x2D0
+#define HW_PINCTRL_DRIVE14 0x2E0
+
+#define HW_PINCTRL_PULL0 0x400
+#define HW_PINCTRL_PULL1 0x410
+#define HW_PINCTRL_PULL2 0x420
+#define HW_PINCTRL_PULL3 0x430
+
+#define HW_PINCTRL_DOUT0 0x500
+#define HW_PINCTRL_DOUT1 0x510
+#define HW_PINCTRL_DOUT2 0x520
+
+#define HW_PINCTRL_DIN0 0x600
+#define HW_PINCTRL_DIN1 0x610
+#define HW_PINCTRL_DIN2 0x620
+
+#define HW_PINCTRL_DOE0 0x700
+#define HW_PINCTRL_DOE1 0x710
+#define HW_PINCTRL_DOE2 0x720
+
+#define HW_PINCTRL_PIN2IRQ0 0x800
+#define HW_PINCTRL_PIN2IRQ1 0x810
+#define HW_PINCTRL_PIN2IRQ2 0x820
+
+#define HW_PINCTRL_IRQEN0 0x900
+#define HW_PINCTRL_IRQEN1 0x910
+#define HW_PINCTRL_IRQEN2 0x920
+
+#define HW_PINCTRL_IRQLEVEL0 0xA00
+#define HW_PINCTRL_IRQLEVEL1 0xA10
+#define HW_PINCTRL_IRQLEVEL2 0xA20
+
+#define HW_PINCTRL_IRQPOL0 0xB00
+#define HW_PINCTRL_IRQPOL1 0xB10
+#define HW_PINCTRL_IRQPOL2 0xB20
+
+#define HW_PINCTRL_IRQSTAT0 0xC00
+#define HW_PINCTRL_IRQSTAT1 0xC10
+#define HW_PINCTRL_IRQSTAT2 0xC20
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-power.h b/arch/arm/mach-stmp378x/include/mach/regs-power.h
new file mode 100644
index 0000000..e454c83
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-power.h
@@ -0,0 +1,63 @@
+/*
+ * stmp378x: POWER register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _MACH_REGS_POWER
+#define _MACH_REGS_POWER
+
+#define REGS_POWER_BASE (STMP3XXX_REGS_BASE + 0x44000)
+#define REGS_POWER_PHYS 0x80044000
+#define REGS_POWER_SIZE 0x2000
+
+#define HW_POWER_CTRL 0x0
+#define BM_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO 0x00000001
+#define BP_POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO 0
+#define BM_POWER_CTRL_ENIRQ_PSWITCH 0x00020000
+#define BM_POWER_CTRL_PSWITCH_IRQ 0x00100000
+#define BM_POWER_CTRL_CLKGATE 0x40000000
+
+#define HW_POWER_5VCTRL 0x10
+#define BM_POWER_5VCTRL_ENABLE_LINREG_ILIMIT 0x00000040
+
+#define HW_POWER_MINPWR 0x20
+
+#define HW_POWER_CHARGE 0x30
+
+#define HW_POWER_VDDDCTRL 0x40
+
+#define HW_POWER_VDDACTRL 0x50
+
+#define HW_POWER_VDDIOCTRL 0x60
+#define BM_POWER_VDDIOCTRL_TRG 0x0000001F
+#define BP_POWER_VDDIOCTRL_TRG 0
+
+#define HW_POWER_STS 0xC0
+#define BM_POWER_STS_VBUSVALID 0x00000002
+#define BM_POWER_STS_BVALID 0x00000004
+#define BM_POWER_STS_AVALID 0x00000008
+#define BM_POWER_STS_DC_OK 0x00000200
+
+#define HW_POWER_RESET 0x100
+
+#define HW_POWER_DEBUG 0x110
+#define BM_POWER_DEBUG_BVALIDPIOLOCK 0x00000002
+#define BM_POWER_DEBUG_AVALIDPIOLOCK 0x00000004
+#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK 0x00000008
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pwm.h b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h
new file mode 100644
index 0000000..0d0f9e5
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-pwm.h
@@ -0,0 +1,53 @@
+/*
+ * stmp378x: PWM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_PWM_BASE (STMP3XXX_REGS_BASE + 0x64000)
+#define REGS_PWM_PHYS 0x80064000
+#define REGS_PWM_SIZE 0x2000
+
+#define HW_PWM_CTRL 0x0
+#define BM_PWM_CTRL_PWM2_ENABLE 0x00000004
+#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE 0x00000020
+
+#define HW_PWM_ACTIVE0 (0x10 + 0 * 0x20)
+#define HW_PWM_ACTIVE1 (0x10 + 1 * 0x20)
+#define HW_PWM_ACTIVE2 (0x10 + 2 * 0x20)
+#define HW_PWM_ACTIVE3 (0x10 + 3 * 0x20)
+
+#define HW_PWM_ACTIVEn 0x10
+#define BM_PWM_ACTIVEn_ACTIVE 0x0000FFFF
+#define BP_PWM_ACTIVEn_ACTIVE 0
+#define BM_PWM_ACTIVEn_INACTIVE 0xFFFF0000
+#define BP_PWM_ACTIVEn_INACTIVE 16
+
+#define HW_PWM_PERIOD0 (0x20 + 0 * 0x20)
+#define HW_PWM_PERIOD1 (0x20 + 1 * 0x20)
+#define HW_PWM_PERIOD2 (0x20 + 2 * 0x20)
+#define HW_PWM_PERIOD3 (0x20 + 3 * 0x20)
+
+#define HW_PWM_PERIODn 0x20
+#define BM_PWM_PERIODn_PERIOD 0x0000FFFF
+#define BP_PWM_PERIODn_PERIOD 0
+#define BM_PWM_PERIODn_ACTIVE_STATE 0x00030000
+#define BP_PWM_PERIODn_ACTIVE_STATE 16
+#define BM_PWM_PERIODn_INACTIVE_STATE 0x000C0000
+#define BP_PWM_PERIODn_INACTIVE_STATE 18
+#define BM_PWM_PERIODn_CDIV 0x00700000
+#define BP_PWM_PERIODn_CDIV 20
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-pxp.h b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h
new file mode 100644
index 0000000..54d2978
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-pxp.h
@@ -0,0 +1,140 @@
+/*
+ * stmp378x: PXP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_PXP_BASE (STMP3XXX_REGS_BASE + 0x2A000)
+#define REGS_PXP_PHYS 0x8002A000
+#define REGS_PXP_SIZE 0x2000
+
+#define HW_PXP_CTRL 0x0
+#define BM_PXP_CTRL_ENABLE 0x00000001
+#define BP_PXP_CTRL_ENABLE 0
+#define BM_PXP_CTRL_IRQ_ENABLE 0x00000002
+#define BM_PXP_CTRL_OUTPUT_RGB_FORMAT 0x000000F0
+#define BP_PXP_CTRL_OUTPUT_RGB_FORMAT 4
+#define BM_PXP_CTRL_ROTATE 0x00000300
+#define BP_PXP_CTRL_ROTATE 8
+#define BM_PXP_CTRL_HFLIP 0x00000400
+#define BM_PXP_CTRL_VFLIP 0x00000800
+#define BM_PXP_CTRL_S0_FORMAT 0x0000F000
+#define BP_PXP_CTRL_S0_FORMAT 12
+#define BM_PXP_CTRL_SCALE 0x00040000
+#define BM_PXP_CTRL_CROP 0x00080000
+
+#define HW_PXP_STAT 0x10
+#define BM_PXP_STAT_IRQ 0x00000001
+#define BP_PXP_STAT_IRQ 0
+
+#define HW_PXP_RGBBUF 0x20
+
+#define HW_PXP_RGBSIZE 0x40
+#define BM_PXP_RGBSIZE_HEIGHT 0x00000FFF
+#define BP_PXP_RGBSIZE_HEIGHT 0
+#define BM_PXP_RGBSIZE_WIDTH 0x00FFF000
+#define BP_PXP_RGBSIZE_WIDTH 12
+
+#define HW_PXP_S0BUF 0x50
+
+#define HW_PXP_S0UBUF 0x60
+
+#define HW_PXP_S0VBUF 0x70
+
+#define HW_PXP_S0PARAM 0x80
+#define BM_PXP_S0PARAM_HEIGHT 0x000000FF
+#define BP_PXP_S0PARAM_HEIGHT 0
+#define BM_PXP_S0PARAM_WIDTH 0x0000FF00
+#define BP_PXP_S0PARAM_WIDTH 8
+#define BM_PXP_S0PARAM_YBASE 0x00FF0000
+#define BP_PXP_S0PARAM_YBASE 16
+#define BM_PXP_S0PARAM_XBASE 0xFF000000
+#define BP_PXP_S0PARAM_XBASE 24
+
+#define HW_PXP_S0BACKGROUND 0x90
+
+#define HW_PXP_S0CROP 0xA0
+#define BM_PXP_S0CROP_HEIGHT 0x000000FF
+#define BP_PXP_S0CROP_HEIGHT 0
+#define BM_PXP_S0CROP_WIDTH 0x0000FF00
+#define BP_PXP_S0CROP_WIDTH 8
+#define BM_PXP_S0CROP_YBASE 0x00FF0000
+#define BP_PXP_S0CROP_YBASE 16
+#define BM_PXP_S0CROP_XBASE 0xFF000000
+#define BP_PXP_S0CROP_XBASE 24
+
+#define HW_PXP_S0SCALE 0xB0
+#define BM_PXP_S0SCALE_XSCALE 0x00003FFF
+#define BP_PXP_S0SCALE_XSCALE 0
+#define BM_PXP_S0SCALE_YSCALE 0x3FFF0000
+#define BP_PXP_S0SCALE_YSCALE 16
+
+#define HW_PXP_CSCCOEFF0 0xD0
+
+#define HW_PXP_CSCCOEFF1 0xE0
+
+#define HW_PXP_CSCCOEFF2 0xF0
+
+#define HW_PXP_S0COLORKEYLOW 0x180
+
+#define HW_PXP_S0COLORKEYHIGH 0x190
+
+#define HW_PXP_OL0 (0x200 + 0 * 0x40)
+#define HW_PXP_OL1 (0x200 + 1 * 0x40)
+#define HW_PXP_OL2 (0x200 + 2 * 0x40)
+#define HW_PXP_OL3 (0x200 + 3 * 0x40)
+#define HW_PXP_OL4 (0x200 + 4 * 0x40)
+#define HW_PXP_OL5 (0x200 + 5 * 0x40)
+#define HW_PXP_OL6 (0x200 + 6 * 0x40)
+#define HW_PXP_OL7 (0x200 + 7 * 0x40)
+
+#define HW_PXP_OLn 0x200
+
+#define HW_PXP_OL0SIZE (0x210 + 0 * 0x40)
+#define HW_PXP_OL1SIZE (0x210 + 1 * 0x40)
+#define HW_PXP_OL2SIZE (0x210 + 2 * 0x40)
+#define HW_PXP_OL3SIZE (0x210 + 3 * 0x40)
+#define HW_PXP_OL4SIZE (0x210 + 4 * 0x40)
+#define HW_PXP_OL5SIZE (0x210 + 5 * 0x40)
+#define HW_PXP_OL6SIZE (0x210 + 6 * 0x40)
+#define HW_PXP_OL7SIZE (0x210 + 7 * 0x40)
+
+#define HW_PXP_OLnSIZE 0x210
+#define BM_PXP_OLnSIZE_HEIGHT 0x000000FF
+#define BP_PXP_OLnSIZE_HEIGHT 0
+#define BM_PXP_OLnSIZE_WIDTH 0x0000FF00
+#define BP_PXP_OLnSIZE_WIDTH 8
+
+#define HW_PXP_OL0PARAM (0x220 + 0 * 0x40)
+#define HW_PXP_OL1PARAM (0x220 + 1 * 0x40)
+#define HW_PXP_OL2PARAM (0x220 + 2 * 0x40)
+#define HW_PXP_OL3PARAM (0x220 + 3 * 0x40)
+#define HW_PXP_OL4PARAM (0x220 + 4 * 0x40)
+#define HW_PXP_OL5PARAM (0x220 + 5 * 0x40)
+#define HW_PXP_OL6PARAM (0x220 + 6 * 0x40)
+#define HW_PXP_OL7PARAM (0x220 + 7 * 0x40)
+
+#define HW_PXP_OLnPARAM 0x220
+#define BM_PXP_OLnPARAM_ENABLE 0x00000001
+#define BP_PXP_OLnPARAM_ENABLE 0
+#define BM_PXP_OLnPARAM_ALPHA_CNTL 0x00000006
+#define BP_PXP_OLnPARAM_ALPHA_CNTL 1
+#define BM_PXP_OLnPARAM_ENABLE_COLORKEY 0x00000008
+#define BM_PXP_OLnPARAM_FORMAT 0x000000F0
+#define BP_PXP_OLnPARAM_FORMAT 4
+#define BM_PXP_OLnPARAM_ALPHA 0x0000FF00
+#define BP_PXP_OLnPARAM_ALPHA 8
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-rtc.h b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h
new file mode 100644
index 0000000..b8dbd67
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-rtc.h
@@ -0,0 +1,59 @@
+/*
+ * stmp378x: RTC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_RTC_BASE (STMP3XXX_REGS_BASE + 0x5C000)
+#define REGS_RTC_PHYS 0x8005C000
+#define REGS_RTC_SIZE 0x2000
+
+#define HW_RTC_CTRL 0x0
+#define BM_RTC_CTRL_ALARM_IRQ_EN 0x00000001
+#define BP_RTC_CTRL_ALARM_IRQ_EN 0
+#define BM_RTC_CTRL_ONEMSEC_IRQ_EN 0x00000002
+#define BM_RTC_CTRL_ALARM_IRQ 0x00000004
+#define BM_RTC_CTRL_ONEMSEC_IRQ 0x00000008
+#define BM_RTC_CTRL_WATCHDOGEN 0x00000010
+
+#define HW_RTC_STAT 0x10
+#define BM_RTC_STAT_NEW_REGS 0x0000FF00
+#define BP_RTC_STAT_NEW_REGS 8
+#define BM_RTC_STAT_STALE_REGS 0x00FF0000
+#define BP_RTC_STAT_STALE_REGS 16
+#define BM_RTC_STAT_RTC_PRESENT 0x80000000
+
+#define HW_RTC_SECONDS 0x30
+
+#define HW_RTC_ALARM 0x40
+
+#define HW_RTC_WATCHDOG 0x50
+
+#define HW_RTC_PERSISTENT0 0x60
+#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN 0x00000002
+#define BM_RTC_PERSISTENT0_ALARM_EN 0x00000004
+#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP 0x00000010
+#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP 0x00000020
+#define BM_RTC_PERSISTENT0_ALARM_WAKE 0x00000080
+#define BM_RTC_PERSISTENT0_SPARE_ANALOG 0xFFFC0000
+#define BP_RTC_PERSISTENT0_SPARE_ANALOG 18
+
+#define HW_RTC_PERSISTENT1 0x70
+#define BM_RTC_PERSISTENT1_GENERAL 0xFFFFFFFF
+#define BP_RTC_PERSISTENT1_GENERAL 0
+
+#define HW_RTC_VERSION 0xD0
diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/mach-stmp378x/include/mach/regs-saif.h
index 7d7cb0b..6df4176 100644
--- a/arch/arm/mach-imx/include/mach/vmalloc.h
+++ b/arch/arm/mach-stmp378x/include/mach/regs-saif.h
@@ -1,7 +1,8 @@
/*
- * arch/arm/mach-imx/include/mach/vmalloc.h
+ * stmp378x: SAIF register definitions
*
- * Copyright (C) 2000 Russell King.
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,6 +16,6 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+#define REGS_SAIF_SIZE 0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-spdif.h b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h
new file mode 100644
index 0000000..8015398
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-spdif.h
@@ -0,0 +1,49 @@
+/*
+ * stmp378x: SPDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_SPDIF_BASE (STMP3XXX_REGS_BASE + 0x54000)
+#define REGS_SPDIF_PHYS 0x80054000
+#define REGS_SPDIF_SIZE 0x2000
+
+#define HW_SPDIF_CTRL 0x0
+#define BM_SPDIF_CTRL_RUN 0x00000001
+#define BP_SPDIF_CTRL_RUN 0
+#define BM_SPDIF_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
+#define BM_SPDIF_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
+#define BM_SPDIF_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
+#define BM_SPDIF_CTRL_WORD_LENGTH 0x00000010
+#define BM_SPDIF_CTRL_CLKGATE 0x40000000
+#define BM_SPDIF_CTRL_SFTRST 0x80000000
+
+#define HW_SPDIF_STAT 0x10
+
+#define HW_SPDIF_FRAMECTRL 0x20
+
+#define HW_SPDIF_SRR 0x30
+#define BM_SPDIF_SRR_RATE 0x000FFFFF
+#define BP_SPDIF_SRR_RATE 0
+#define BM_SPDIF_SRR_BASEMULT 0x70000000
+#define BP_SPDIF_SRR_BASEMULT 28
+
+#define HW_SPDIF_DEBUG 0x40
+
+#define HW_SPDIF_DATA 0x50
+
+#define HW_SPDIF_VERSION 0x60
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-ssp.h b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h
new file mode 100644
index 0000000..28aacf0
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-ssp.h
@@ -0,0 +1,102 @@
+/*
+ * stmp378x: SSP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_SSP1_BASE (STMP3XXX_REGS_BASE + 0x10000)
+#define REGS_SSP1_PHYS 0x80010000
+#define REGS_SSP2_BASE (STMP3XXX_REGS_BASE + 0x34000)
+#define REGS_SSP2_PHYS 0x80034000
+#define REGS_SSP_SIZE 0x2000
+
+#define HW_SSP_CTRL0 0x0
+#define BM_SSP_CTRL0_XFER_COUNT 0x0000FFFF
+#define BP_SSP_CTRL0_XFER_COUNT 0
+#define BM_SSP_CTRL0_ENABLE 0x00010000
+#define BM_SSP_CTRL0_GET_RESP 0x00020000
+#define BM_SSP_CTRL0_LONG_RESP 0x00080000
+#define BM_SSP_CTRL0_WAIT_FOR_CMD 0x00100000
+#define BM_SSP_CTRL0_WAIT_FOR_IRQ 0x00200000
+#define BM_SSP_CTRL0_BUS_WIDTH 0x00C00000
+#define BP_SSP_CTRL0_BUS_WIDTH 22
+#define BM_SSP_CTRL0_DATA_XFER 0x01000000
+#define BM_SSP_CTRL0_READ 0x02000000
+#define BM_SSP_CTRL0_IGNORE_CRC 0x04000000
+#define BM_SSP_CTRL0_LOCK_CS 0x08000000
+#define BM_SSP_CTRL0_RUN 0x20000000
+#define BM_SSP_CTRL0_CLKGATE 0x40000000
+#define BM_SSP_CTRL0_SFTRST 0x80000000
+
+#define HW_SSP_CMD0 0x10
+#define BM_SSP_CMD0_CMD 0x000000FF
+#define BP_SSP_CMD0_CMD 0
+#define BM_SSP_CMD0_BLOCK_COUNT 0x0000FF00
+#define BP_SSP_CMD0_BLOCK_COUNT 8
+#define BM_SSP_CMD0_BLOCK_SIZE 0x000F0000
+#define BP_SSP_CMD0_BLOCK_SIZE 16
+#define BM_SSP_CMD0_APPEND_8CYC 0x00100000
+#define BM_SSP_CMD1_CMD_ARG 0xFFFFFFFF
+#define BP_SSP_CMD1_CMD_ARG 0
+
+#define HW_SSP_TIMING 0x50
+#define BM_SSP_TIMING_CLOCK_RATE 0x000000FF
+#define BP_SSP_TIMING_CLOCK_RATE 0
+#define BM_SSP_TIMING_CLOCK_DIVIDE 0x0000FF00
+#define BP_SSP_TIMING_CLOCK_DIVIDE 8
+#define BM_SSP_TIMING_TIMEOUT 0xFFFF0000
+#define BP_SSP_TIMING_TIMEOUT 16
+
+#define HW_SSP_CTRL1 0x60
+#define BM_SSP_CTRL1_SSP_MODE 0x0000000F
+#define BP_SSP_CTRL1_SSP_MODE 0
+#define BM_SSP_CTRL1_WORD_LENGTH 0x000000F0
+#define BP_SSP_CTRL1_WORD_LENGTH 4
+#define BM_SSP_CTRL1_POLARITY 0x00000200
+#define BM_SSP_CTRL1_PHASE 0x00000400
+#define BM_SSP_CTRL1_DMA_ENABLE 0x00002000
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ 0x00008000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN 0x00010000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ 0x00020000
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ 0x00200000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN 0x00400000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ 0x00800000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN 0x01000000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ 0x02000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN 0x04000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ 0x08000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN 0x10000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ 0x20000000
+#define BM_SSP_CTRL1_SDIO_IRQ 0x80000000
+
+#define HW_SSP_DATA 0x70
+
+#define HW_SSP_SDRESP0 0x80
+
+#define HW_SSP_SDRESP1 0x90
+
+#define HW_SSP_SDRESP2 0xA0
+
+#define HW_SSP_SDRESP3 0xB0
+
+#define HW_SSP_STATUS 0xC0
+#define BM_SSP_STATUS_FIFO_EMPTY 0x00000020
+#define BM_SSP_STATUS_TIMEOUT 0x00001000
+#define BM_SSP_STATUS_RESP_TIMEOUT 0x00004000
+#define BM_SSP_STATUS_RESP_ERR 0x00008000
+#define BM_SSP_STATUS_RESP_CRC_ERR 0x00010000
+#define BM_SSP_STATUS_CARD_DETECT 0x10000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-sydma.h b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h
new file mode 100644
index 0000000..08343a8
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-sydma.h
@@ -0,0 +1,23 @@
+/*
+ * stmp378x: SYDMA register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_SYDMA_BASE (STMP3XXX_REGS_BASE + 0x26000)
+#define REGS_SYDMA_PHYS 0x80026000
+#define REGS_SYDMA_SIZE 0x2000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-timrot.h b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h
new file mode 100644
index 0000000..b552795
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-timrot.h
@@ -0,0 +1,68 @@
+/*
+ * stmp378x: TIMROT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _MACH_REGS_TIMROT
+#define _MACH_REGS_TIMROT
+
+#define REGS_TIMROT_BASE (STMP3XXX_REGS_BASE + 0x68000)
+#define REGS_TIMROT_PHYS 0x80068000
+#define REGS_TIMROT_SIZE 0x2000
+
+#define HW_TIMROT_ROTCTRL 0x0
+#define BM_TIMROT_ROTCTRL_SELECT_A 0x00000007
+#define BP_TIMROT_ROTCTRL_SELECT_A 0
+#define BM_TIMROT_ROTCTRL_SELECT_B 0x00000070
+#define BP_TIMROT_ROTCTRL_SELECT_B 4
+#define BM_TIMROT_ROTCTRL_POLARITY_A 0x00000100
+#define BM_TIMROT_ROTCTRL_POLARITY_B 0x00000200
+#define BM_TIMROT_ROTCTRL_OVERSAMPLE 0x00000C00
+#define BP_TIMROT_ROTCTRL_OVERSAMPLE 10
+#define BM_TIMROT_ROTCTRL_RELATIVE 0x00001000
+#define BM_TIMROT_ROTCTRL_DIVIDER 0x003F0000
+#define BP_TIMROT_ROTCTRL_DIVIDER 16
+#define BM_TIMROT_ROTCTRL_ROTARY_PRESENT 0x20000000
+#define BM_TIMROT_ROTCTRL_CLKGATE 0x40000000
+#define BM_TIMROT_ROTCTRL_SFTRST 0x80000000
+
+#define HW_TIMROT_ROTCOUNT 0x10
+#define BM_TIMROT_ROTCOUNT_UPDOWN 0x0000FFFF
+#define BP_TIMROT_ROTCOUNT_UPDOWN 0
+
+#define HW_TIMROT_TIMCTRL0 (0x20 + 0 * 0x20)
+#define HW_TIMROT_TIMCTRL1 (0x20 + 1 * 0x20)
+#define HW_TIMROT_TIMCTRL2 (0x20 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCTRLn 0x20
+#define BM_TIMROT_TIMCTRLn_SELECT 0x0000000F
+#define BP_TIMROT_TIMCTRLn_SELECT 0
+#define BM_TIMROT_TIMCTRLn_PRESCALE 0x00000030
+#define BP_TIMROT_TIMCTRLn_PRESCALE 4
+#define BM_TIMROT_TIMCTRLn_RELOAD 0x00000040
+#define BM_TIMROT_TIMCTRLn_UPDATE 0x00000080
+#define BM_TIMROT_TIMCTRLn_IRQ_EN 0x00004000
+#define BM_TIMROT_TIMCTRLn_IRQ 0x00008000
+
+#define HW_TIMROT_TIMCOUNT0 (0x30 + 0 * 0x20)
+#define HW_TIMROT_TIMCOUNT1 (0x30 + 1 * 0x20)
+#define HW_TIMROT_TIMCOUNT2 (0x30 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCOUNTn 0x30
+
+#endif
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
new file mode 100644
index 0000000..7f895cb
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-tvenc.h
@@ -0,0 +1,67 @@
+/*
+ * stmp378x: TVENC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_TVENC_BASE (STMP3XXX_REGS_BASE + 0x38000)
+#define REGS_TVENC_PHYS 0x80038000
+#define REGS_TVENC_SIZE 0x2000
+
+#define HW_TVENC_CTRL 0x0
+#define BM_TVENC_CTRL_CLKGATE 0x40000000
+#define BM_TVENC_CTRL_SFTRST 0x80000000
+
+#define HW_TVENC_CONFIG 0x10
+#define BM_TVENC_CONFIG_ENCD_MODE 0x00000007
+#define BP_TVENC_CONFIG_ENCD_MODE 0
+#define BM_TVENC_CONFIG_SYNC_MODE 0x00000070
+#define BP_TVENC_CONFIG_SYNC_MODE 4
+#define BM_TVENC_CONFIG_FSYNC_PHS 0x00000200
+#define BM_TVENC_CONFIG_CGAIN 0x0000C000
+#define BP_TVENC_CONFIG_CGAIN 14
+#define BM_TVENC_CONFIG_YGAIN_SEL 0x00030000
+#define BP_TVENC_CONFIG_YGAIN_SEL 16
+#define BM_TVENC_CONFIG_PAL_SHAPE 0x00100000
+
+#define HW_TVENC_SYNCOFFSET 0x30
+
+#define HW_TVENC_COLORSUB0 0xC0
+
+#define HW_TVENC_COLORBURST 0x140
+#define BM_TVENC_COLORBURST_PBA 0x00FF0000
+#define BP_TVENC_COLORBURST_PBA 16
+#define BM_TVENC_COLORBURST_NBA 0xFF000000
+#define BP_TVENC_COLORBURST_NBA 24
+
+#define HW_TVENC_MACROVISION0 0x150
+
+#define HW_TVENC_MACROVISION1 0x160
+
+#define HW_TVENC_MACROVISION2 0x170
+
+#define HW_TVENC_MACROVISION3 0x180
+
+#define HW_TVENC_MACROVISION4 0x190
+
+#define HW_TVENC_DACCTRL 0x1A0
+#define BM_TVENC_DACCTRL_RVAL 0x00000070
+#define BP_TVENC_DACCTRL_RVAL 4
+#define BM_TVENC_DACCTRL_DUMP_TOVDD1 0x00000100
+#define BM_TVENC_DACCTRL_PWRUP1 0x00001000
+#define BM_TVENC_DACCTRL_GAINUP 0x00040000
+#define BM_TVENC_DACCTRL_GAINDN 0x00080000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
new file mode 100644
index 0000000..a251e68
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-uartapp.h
@@ -0,0 +1,87 @@
+/*
+ * stmp378x: UARTAPP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_UARTAPP1_BASE (STMP3XXX_REGS_BASE + 0x6C000)
+#define REGS_UARTAPP1_PHYS 0x8006C000
+#define REGS_UARTAPP2_BASE (STMP3XXX_REGS_BASE + 0x6E000)
+#define REGS_UARTAPP2_PHYS 0x8006E000
+#define REGS_UARTAPP_SIZE 0x2000
+
+#define HW_UARTAPP_CTRL0 0x0
+#define BM_UARTAPP_CTRL0_XFER_COUNT 0x0000FFFF
+#define BP_UARTAPP_CTRL0_XFER_COUNT 0
+#define BM_UARTAPP_CTRL0_RXTIMEOUT 0x07FF0000
+#define BP_UARTAPP_CTRL0_RXTIMEOUT 16
+#define BM_UARTAPP_CTRL0_RXTO_ENABLE 0x08000000
+#define BM_UARTAPP_CTRL0_RUN 0x20000000
+#define BM_UARTAPP_CTRL0_SFTRST 0x80000000
+#define BM_UARTAPP_CTRL1_XFER_COUNT 0x0000FFFF
+#define BP_UARTAPP_CTRL1_XFER_COUNT 0
+#define BM_UARTAPP_CTRL1_RUN 0x10000000
+
+#define HW_UARTAPP_CTRL2 0x20
+#define BM_UARTAPP_CTRL2_UARTEN 0x00000001
+#define BP_UARTAPP_CTRL2_UARTEN 0
+#define BM_UARTAPP_CTRL2_TXE 0x00000100
+#define BM_UARTAPP_CTRL2_RXE 0x00000200
+#define BM_UARTAPP_CTRL2_RTS 0x00000800
+#define BM_UARTAPP_CTRL2_RTSEN 0x00004000
+#define BM_UARTAPP_CTRL2_CTSEN 0x00008000
+#define BM_UARTAPP_CTRL2_RXDMAE 0x01000000
+#define BM_UARTAPP_CTRL2_TXDMAE 0x02000000
+#define BM_UARTAPP_CTRL2_DMAONERR 0x04000000
+
+#define HW_UARTAPP_LINECTRL 0x30
+#define BM_UARTAPP_LINECTRL_BRK 0x00000001
+#define BP_UARTAPP_LINECTRL_BRK 0
+#define BM_UARTAPP_LINECTRL_PEN 0x00000002
+#define BM_UARTAPP_LINECTRL_EPS 0x00000004
+#define BM_UARTAPP_LINECTRL_STP2 0x00000008
+#define BM_UARTAPP_LINECTRL_FEN 0x00000010
+#define BM_UARTAPP_LINECTRL_WLEN 0x00000060
+#define BP_UARTAPP_LINECTRL_WLEN 5
+#define BM_UARTAPP_LINECTRL_SPS 0x00000080
+#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC 0x00003F00
+#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC 8
+#define BM_UARTAPP_LINECTRL_BAUD_DIVINT 0xFFFF0000
+#define BP_UARTAPP_LINECTRL_BAUD_DIVINT 16
+
+#define HW_UARTAPP_INTR 0x50
+#define BM_UARTAPP_INTR_CTSMIS 0x00000002
+#define BM_UARTAPP_INTR_RTIS 0x00000040
+#define BM_UARTAPP_INTR_CTSMIEN 0x00020000
+#define BM_UARTAPP_INTR_RXIEN 0x00100000
+#define BM_UARTAPP_INTR_RTIEN 0x00400000
+
+#define HW_UARTAPP_DATA 0x60
+
+#define HW_UARTAPP_STAT 0x70
+#define BM_UARTAPP_STAT_RXCOUNT 0x0000FFFF
+#define BP_UARTAPP_STAT_RXCOUNT 0
+#define BM_UARTAPP_STAT_FERR 0x00010000
+#define BM_UARTAPP_STAT_PERR 0x00020000
+#define BM_UARTAPP_STAT_BERR 0x00040000
+#define BM_UARTAPP_STAT_OERR 0x00080000
+#define BM_UARTAPP_STAT_RXFE 0x01000000
+#define BM_UARTAPP_STAT_TXFF 0x02000000
+#define BM_UARTAPP_STAT_TXFE 0x08000000
+#define BM_UARTAPP_STAT_CTS 0x10000000
+
+#define HW_UARTAPP_VERSION 0x90
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
new file mode 100644
index 0000000..b810deb
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-uartdbg.h
@@ -0,0 +1,268 @@
+/*
+ * stmp378x: UARTDBG register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_UARTDBG_BASE (STMP3XXX_REGS_BASE + 0x70000)
+#define REGS_UARTDBG_PHYS 0x80070000
+#define REGS_UARTDBG_SIZE 0x2000
+
+#define HW_UARTDBGDR 0x00000000
+#define BP_UARTDBGDR_UNAVAILABLE 16
+#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDR_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGDR_UNAVAILABLE)
+#define BP_UARTDBGDR_RESERVED 12
+#define BM_UARTDBGDR_RESERVED 0x0000F000
+#define BF_UARTDBGDR_RESERVED(v) \
+ (((v) << 12) & BM_UARTDBGDR_RESERVED)
+#define BM_UARTDBGDR_OE 0x00000800
+#define BM_UARTDBGDR_BE 0x00000400
+#define BM_UARTDBGDR_PE 0x00000200
+#define BM_UARTDBGDR_FE 0x00000100
+#define BP_UARTDBGDR_DATA 0
+#define BM_UARTDBGDR_DATA 0x000000FF
+#define BF_UARTDBGDR_DATA(v) \
+ (((v) << 0) & BM_UARTDBGDR_DATA)
+#define HW_UARTDBGRSR_ECR 0x00000004
+#define BP_UARTDBGRSR_ECR_UNAVAILABLE 8
+#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \
+ (((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE)
+#define BP_UARTDBGRSR_ECR_EC 4
+#define BM_UARTDBGRSR_ECR_EC 0x000000F0
+#define BF_UARTDBGRSR_ECR_EC(v) \
+ (((v) << 4) & BM_UARTDBGRSR_ECR_EC)
+#define BM_UARTDBGRSR_ECR_OE 0x00000008
+#define BM_UARTDBGRSR_ECR_BE 0x00000004
+#define BM_UARTDBGRSR_ECR_PE 0x00000002
+#define BM_UARTDBGRSR_ECR_FE 0x00000001
+#define HW_UARTDBGFR 0x00000018
+#define BP_UARTDBGFR_UNAVAILABLE 16
+#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGFR_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGFR_UNAVAILABLE)
+#define BP_UARTDBGFR_RESERVED 9
+#define BM_UARTDBGFR_RESERVED 0x0000FE00
+#define BF_UARTDBGFR_RESERVED(v) \
+ (((v) << 9) & BM_UARTDBGFR_RESERVED)
+#define BM_UARTDBGFR_RI 0x00000100
+#define BM_UARTDBGFR_TXFE 0x00000080
+#define BM_UARTDBGFR_RXFF 0x00000040
+#define BM_UARTDBGFR_TXFF 0x00000020
+#define BM_UARTDBGFR_RXFE 0x00000010
+#define BM_UARTDBGFR_BUSY 0x00000008
+#define BM_UARTDBGFR_DCD 0x00000004
+#define BM_UARTDBGFR_DSR 0x00000002
+#define BM_UARTDBGFR_CTS 0x00000001
+#define HW_UARTDBGILPR 0x00000020
+#define BP_UARTDBGILPR_UNAVAILABLE 8
+#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGILPR_UNAVAILABLE(v) \
+ (((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE)
+#define BP_UARTDBGILPR_ILPDVSR 0
+#define BM_UARTDBGILPR_ILPDVSR 0x000000FF
+#define BF_UARTDBGILPR_ILPDVSR(v) \
+ (((v) << 0) & BM_UARTDBGILPR_ILPDVSR)
+#define HW_UARTDBGIBRD 0x00000024
+#define BP_UARTDBGIBRD_UNAVAILABLE 16
+#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIBRD_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE)
+#define BP_UARTDBGIBRD_BAUD_DIVINT 0
+#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF
+#define BF_UARTDBGIBRD_BAUD_DIVINT(v) \
+ (((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT)
+#define HW_UARTDBGFBRD 0x00000028
+#define BP_UARTDBGFBRD_UNAVAILABLE 8
+#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGFBRD_UNAVAILABLE(v) \
+ (((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE)
+#define BP_UARTDBGFBRD_RESERVED 6
+#define BM_UARTDBGFBRD_RESERVED 0x000000C0
+#define BF_UARTDBGFBRD_RESERVED(v) \
+ (((v) << 6) & BM_UARTDBGFBRD_RESERVED)
+#define BP_UARTDBGFBRD_BAUD_DIVFRAC 0
+#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F
+#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v) \
+ (((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC)
+#define HW_UARTDBGLCR_H 0x0000002c
+#define BP_UARTDBGLCR_H_UNAVAILABLE 16
+#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE)
+#define BP_UARTDBGLCR_H_RESERVED 8
+#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00
+#define BF_UARTDBGLCR_H_RESERVED(v) \
+ (((v) << 8) & BM_UARTDBGLCR_H_RESERVED)
+#define BM_UARTDBGLCR_H_SPS 0x00000080
+#define BP_UARTDBGLCR_H_WLEN 5
+#define BM_UARTDBGLCR_H_WLEN 0x00000060
+#define BF_UARTDBGLCR_H_WLEN(v) \
+ (((v) << 5) & BM_UARTDBGLCR_H_WLEN)
+#define BM_UARTDBGLCR_H_FEN 0x00000010
+#define BM_UARTDBGLCR_H_STP2 0x00000008
+#define BM_UARTDBGLCR_H_EPS 0x00000004
+#define BM_UARTDBGLCR_H_PEN 0x00000002
+#define BM_UARTDBGLCR_H_BRK 0x00000001
+#define HW_UARTDBGCR 0x00000030
+#define BP_UARTDBGCR_UNAVAILABLE 16
+#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGCR_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGCR_UNAVAILABLE)
+#define BM_UARTDBGCR_CTSEN 0x00008000
+#define BM_UARTDBGCR_RTSEN 0x00004000
+#define BM_UARTDBGCR_OUT2 0x00002000
+#define BM_UARTDBGCR_OUT1 0x00001000
+#define BM_UARTDBGCR_RTS 0x00000800
+#define BM_UARTDBGCR_DTR 0x00000400
+#define BM_UARTDBGCR_RXE 0x00000200
+#define BM_UARTDBGCR_TXE 0x00000100
+#define BM_UARTDBGCR_LBE 0x00000080
+#define BP_UARTDBGCR_RESERVED 3
+#define BM_UARTDBGCR_RESERVED 0x00000078
+#define BF_UARTDBGCR_RESERVED(v) \
+ (((v) << 3) & BM_UARTDBGCR_RESERVED)
+#define BM_UARTDBGCR_SIRLP 0x00000004
+#define BM_UARTDBGCR_SIREN 0x00000002
+#define BM_UARTDBGCR_UARTEN 0x00000001
+#define HW_UARTDBGIFLS 0x00000034
+#define BP_UARTDBGIFLS_UNAVAILABLE 16
+#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIFLS_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE)
+#define BP_UARTDBGIFLS_RESERVED 6
+#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0
+#define BF_UARTDBGIFLS_RESERVED(v) \
+ (((v) << 6) & BM_UARTDBGIFLS_RESERVED)
+#define BP_UARTDBGIFLS_RXIFLSEL 3
+#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038
+#define BF_UARTDBGIFLS_RXIFLSEL(v) \
+ (((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL)
+#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY 0x0
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER 0x1
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF 0x2
+#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS 0x4
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5 0x5
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6 0x6
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7 0x7
+#define BP_UARTDBGIFLS_TXIFLSEL 0
+#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007
+#define BF_UARTDBGIFLS_TXIFLSEL(v) \
+ (((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL)
+#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY 0x0
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER 0x1
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF 0x2
+#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS 0x4
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5 0x5
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6 0x6
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7 0x7
+#define HW_UARTDBGIMSC 0x00000038
+#define BP_UARTDBGIMSC_UNAVAILABLE 16
+#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIMSC_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE)
+#define BP_UARTDBGIMSC_RESERVED 11
+#define BM_UARTDBGIMSC_RESERVED 0x0000F800
+#define BF_UARTDBGIMSC_RESERVED(v) \
+ (((v) << 11) & BM_UARTDBGIMSC_RESERVED)
+#define BM_UARTDBGIMSC_OEIM 0x00000400
+#define BM_UARTDBGIMSC_BEIM 0x00000200
+#define BM_UARTDBGIMSC_PEIM 0x00000100
+#define BM_UARTDBGIMSC_FEIM 0x00000080
+#define BM_UARTDBGIMSC_RTIM 0x00000040
+#define BM_UARTDBGIMSC_TXIM 0x00000020
+#define BM_UARTDBGIMSC_RXIM 0x00000010
+#define BM_UARTDBGIMSC_DSRMIM 0x00000008
+#define BM_UARTDBGIMSC_DCDMIM 0x00000004
+#define BM_UARTDBGIMSC_CTSMIM 0x00000002
+#define BM_UARTDBGIMSC_RIMIM 0x00000001
+#define HW_UARTDBGRIS 0x0000003c
+#define BP_UARTDBGRIS_UNAVAILABLE 16
+#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGRIS_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE)
+#define BP_UARTDBGRIS_RESERVED 11
+#define BM_UARTDBGRIS_RESERVED 0x0000F800
+#define BF_UARTDBGRIS_RESERVED(v) \
+ (((v) << 11) & BM_UARTDBGRIS_RESERVED)
+#define BM_UARTDBGRIS_OERIS 0x00000400
+#define BM_UARTDBGRIS_BERIS 0x00000200
+#define BM_UARTDBGRIS_PERIS 0x00000100
+#define BM_UARTDBGRIS_FERIS 0x00000080
+#define BM_UARTDBGRIS_RTRIS 0x00000040
+#define BM_UARTDBGRIS_TXRIS 0x00000020
+#define BM_UARTDBGRIS_RXRIS 0x00000010
+#define BM_UARTDBGRIS_DSRRMIS 0x00000008
+#define BM_UARTDBGRIS_DCDRMIS 0x00000004
+#define BM_UARTDBGRIS_CTSRMIS 0x00000002
+#define BM_UARTDBGRIS_RIRMIS 0x00000001
+#define HW_UARTDBGMIS 0x00000040
+#define BP_UARTDBGMIS_UNAVAILABLE 16
+#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGMIS_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE)
+#define BP_UARTDBGMIS_RESERVED 11
+#define BM_UARTDBGMIS_RESERVED 0x0000F800
+#define BF_UARTDBGMIS_RESERVED(v) \
+ (((v) << 11) & BM_UARTDBGMIS_RESERVED)
+#define BM_UARTDBGMIS_OEMIS 0x00000400
+#define BM_UARTDBGMIS_BEMIS 0x00000200
+#define BM_UARTDBGMIS_PEMIS 0x00000100
+#define BM_UARTDBGMIS_FEMIS 0x00000080
+#define BM_UARTDBGMIS_RTMIS 0x00000040
+#define BM_UARTDBGMIS_TXMIS 0x00000020
+#define BM_UARTDBGMIS_RXMIS 0x00000010
+#define BM_UARTDBGMIS_DSRMMIS 0x00000008
+#define BM_UARTDBGMIS_DCDMMIS 0x00000004
+#define BM_UARTDBGMIS_CTSMMIS 0x00000002
+#define BM_UARTDBGMIS_RIMMIS 0x00000001
+#define HW_UARTDBGICR 0x00000044
+#define BP_UARTDBGICR_UNAVAILABLE 16
+#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGICR_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGICR_UNAVAILABLE)
+#define BP_UARTDBGICR_RESERVED 11
+#define BM_UARTDBGICR_RESERVED 0x0000F800
+#define BF_UARTDBGICR_RESERVED(v) \
+ (((v) << 11) & BM_UARTDBGICR_RESERVED)
+#define BM_UARTDBGICR_OEIC 0x00000400
+#define BM_UARTDBGICR_BEIC 0x00000200
+#define BM_UARTDBGICR_PEIC 0x00000100
+#define BM_UARTDBGICR_FEIC 0x00000080
+#define BM_UARTDBGICR_RTIC 0x00000040
+#define BM_UARTDBGICR_TXIC 0x00000020
+#define BM_UARTDBGICR_RXIC 0x00000010
+#define BM_UARTDBGICR_DSRMIC 0x00000008
+#define BM_UARTDBGICR_DCDMIC 0x00000004
+#define BM_UARTDBGICR_CTSMIC 0x00000002
+#define BM_UARTDBGICR_RIMIC 0x00000001
+#define HW_UARTDBGDMACR 0x00000048
+#define BP_UARTDBGDMACR_UNAVAILABLE 16
+#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDMACR_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE)
+#define BP_UARTDBGDMACR_RESERVED 3
+#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8
+#define BF_UARTDBGDMACR_RESERVED(v) \
+ (((v) << 3) & BM_UARTDBGDMACR_RESERVED)
+#define BM_UARTDBGDMACR_DMAONERR 0x00000004
+#define BM_UARTDBGDMACR_TXDMAE 0x00000002
+#define BM_UARTDBGDMACR_RXDMAE 0x00000001
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
new file mode 100644
index 0000000..25112c1
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-usbctrl.h
@@ -0,0 +1,40 @@
+/*
+ * stmp378x: USBCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_USBCTRL_BASE (STMP3XXX_REGS_BASE + 0x80000)
+#define REGS_USBCTRL_PHYS 0x80080000
+#define REGS_USBCTRL_SIZE 0x2000
+
+#define HW_USBCTRL_USBCMD 0x140
+#define BM_USBCTRL_USBCMD_RS 0x00000001
+#define BP_USBCTRL_USBCMD_RS 0
+#define BM_USBCTRL_USBCMD_RST 0x00000002
+
+#define HW_USBCTRL_USBINTR 0x148
+#define BM_USBCTRL_USBINTR_UE 0x00000001
+#define BP_USBCTRL_USBINTR_UE 0
+
+#define HW_USBCTRL_PORTSC1 0x184
+#define BM_USBCTRL_PORTSC1_PHCD 0x00800000
+
+#define HW_USBCTRL_OTGSC 0x1A4
+#define BM_USBCTRL_OTGSC_ID 0x00000100
+#define BM_USBCTRL_OTGSC_IDIS 0x00010000
+#define BM_USBCTRL_OTGSC_IDIE 0x01000000
diff --git a/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
new file mode 100644
index 0000000..11f3b73
--- /dev/null
+++ b/arch/arm/mach-stmp378x/include/mach/regs-usbphy.h
@@ -0,0 +1,37 @@
+/*
+ * stmp378x: USBPHY register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_USBPHY_BASE (STMP3XXX_REGS_BASE + 0x7C000)
+#define REGS_USBPHY_PHYS 0x8007C000
+#define REGS_USBPHY_SIZE 0x2000
+
+#define HW_USBPHY_PWD 0x0
+
+#define HW_USBPHY_CTRL 0x30
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT 0x00000002
+#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT 0x00000010
+#define BM_USBPHY_CTRL_ENOTGIDDETECT 0x00000080
+#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN 0x00000800
+#define BM_USBPHY_CTRL_CLKGATE 0x40000000
+#define BM_USBPHY_CTRL_SFTRST 0x80000000
+
+#define HW_USBPHY_STATUS 0x40
+#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS 0x00000040
+#define BM_USBPHY_STATUS_OTGID_STATUS 0x00000100
diff --git a/arch/arm/mach-stmp378x/stmp378x.c b/arch/arm/mach-stmp378x/stmp378x.c
new file mode 100644
index 0000000..ddd49a7
--- /dev/null
+++ b/arch/arm/mach-stmp378x/stmp378x.c
@@ -0,0 +1,299 @@
+/*
+ * Freescale STMP378X platform support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/dma.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/system.h>
+#include <mach/platform.h>
+#include <mach/stmp3xxx.h>
+#include <mach/regs-icoll.h>
+#include <mach/regs-apbh.h>
+#include <mach/regs-apbx.h>
+#include <mach/regs-pxp.h>
+#include <mach/regs-i2c.h>
+
+#include "stmp378x.h"
+/*
+ * IRQ handling
+ */
+static void stmp378x_ack_irq(unsigned int irq)
+{
+ /* Tell ICOLL to release IRQ line */
+ __raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
+
+ /* ACK current interrupt */
+ __raw_writel(0x01 /* BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 */,
+ REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
+
+ /* Barrier */
+ (void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
+}
+
+static void stmp378x_mask_irq(unsigned int irq)
+{
+ /* IRQ disable */
+ stmp3xxx_clearl(BM_ICOLL_INTERRUPTn_ENABLE,
+ REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + irq * 0x10);
+}
+
+static void stmp378x_unmask_irq(unsigned int irq)
+{
+ /* IRQ enable */
+ stmp3xxx_setl(BM_ICOLL_INTERRUPTn_ENABLE,
+ REGS_ICOLL_BASE + HW_ICOLL_INTERRUPTn + irq * 0x10);
+}
+
+static struct irq_chip stmp378x_chip = {
+ .ack = stmp378x_ack_irq,
+ .mask = stmp378x_mask_irq,
+ .unmask = stmp378x_unmask_irq,
+};
+
+void __init stmp378x_init_irq(void)
+{
+ stmp3xxx_init_irq(&stmp378x_chip);
+}
+
+/*
+ * DMA interrupt handling
+ */
+void stmp3xxx_arch_dma_enable_interrupt(int channel)
+{
+ void __iomem *c1, *c2;
+
+ switch (STMP3XXX_DMA_BUS(channel)) {
+ case STMP3XXX_BUS_APBH:
+ c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
+ c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
+ break;
+
+ case STMP3XXX_BUS_APBX:
+ c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
+ c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
+ break;
+
+ default:
+ return;
+ }
+ stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c1);
+ stmp3xxx_setl(1 << (16 + STMP3XXX_DMA_CHANNEL(channel)), c2);
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
+
+void stmp3xxx_arch_dma_clear_interrupt(int channel)
+{
+ void __iomem *c1, *c2;
+
+ switch (STMP3XXX_DMA_BUS(channel)) {
+ case STMP3XXX_BUS_APBH:
+ c1 = REGS_APBH_BASE + HW_APBH_CTRL1;
+ c2 = REGS_APBH_BASE + HW_APBH_CTRL2;
+ break;
+
+ case STMP3XXX_BUS_APBX:
+ c1 = REGS_APBX_BASE + HW_APBX_CTRL1;
+ c2 = REGS_APBX_BASE + HW_APBX_CTRL2;
+ break;
+
+ default:
+ return;
+ }
+ stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c1);
+ stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel), c2);
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
+
+int stmp3xxx_arch_dma_is_interrupt(int channel)
+{
+ int r = 0;
+
+ switch (STMP3XXX_DMA_BUS(channel)) {
+ case STMP3XXX_BUS_APBH:
+ r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
+ (1 << STMP3XXX_DMA_CHANNEL(channel));
+ break;
+
+ case STMP3XXX_BUS_APBX:
+ r = __raw_readl(REGS_APBX_BASE + HW_APBX_CTRL1) &
+ (1 << STMP3XXX_DMA_CHANNEL(channel));
+ break;
+ }
+ return r;
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
+
+void stmp3xxx_arch_dma_reset_channel(int channel)
+{
+ unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+ void __iomem *c0;
+ u32 mask;
+
+ switch (STMP3XXX_DMA_BUS(channel)) {
+ case STMP3XXX_BUS_APBH:
+ c0 = REGS_APBH_BASE + HW_APBH_CTRL0;
+ mask = chbit << BP_APBH_CTRL0_RESET_CHANNEL;
+ break;
+ case STMP3XXX_BUS_APBX:
+ c0 = REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL;
+ mask = chbit << BP_APBX_CHANNEL_CTRL_RESET_CHANNEL;
+ break;
+ default:
+ return;
+ }
+
+ /* Reset channel and wait for it to complete */
+ stmp3xxx_setl(mask, c0);
+ while (__raw_readl(c0) & mask)
+ cpu_relax();
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
+
+void stmp3xxx_arch_dma_freeze(int channel)
+{
+ unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+ u32 mask = 1 << chbit;
+
+ switch (STMP3XXX_DMA_BUS(channel)) {
+ case STMP3XXX_BUS_APBH:
+ stmp3xxx_setl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
+ break;
+ case STMP3XXX_BUS_APBX:
+ stmp3xxx_setl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
+ break;
+ }
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
+
+void stmp3xxx_arch_dma_unfreeze(int channel)
+{
+ unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+ u32 mask = 1 << chbit;
+
+ switch (STMP3XXX_DMA_BUS(channel)) {
+ case STMP3XXX_BUS_APBH:
+ stmp3xxx_clearl(mask, REGS_APBH_BASE + HW_APBH_CTRL0);
+ break;
+ case STMP3XXX_BUS_APBX:
+ stmp3xxx_clearl(mask, REGS_APBX_BASE + HW_APBX_CHANNEL_CTRL);
+ break;
+ }
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
+
+/*
+ * The registers are all very closely mapped, so we might as well map them all
+ * with a single mapping
+ *
+ * Logical Physical
+ * f0000000 80000000 On-chip registers
+ * f1000000 00000000 32k on-chip SRAM
+ */
+
+static struct map_desc stmp378x_io_desc[] __initdata = {
+ {
+ .virtual = (u32)STMP3XXX_REGS_BASE,
+ .pfn = __phys_to_pfn(STMP3XXX_REGS_PHBASE),
+ .length = STMP3XXX_REGS_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = (u32)STMP3XXX_OCRAM_BASE,
+ .pfn = __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
+ .length = STMP3XXX_OCRAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+
+static u64 common_dmamask = DMA_BIT_MASK(32);
+
+/*
+ * devices that are present only on stmp378x, not on all 3xxx boards:
+ * PxP
+ * I2C
+ */
+static struct resource pxp_resource[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = REGS_PXP_PHYS,
+ .end = REGS_PXP_PHYS + REGS_PXP_SIZE,
+ }, {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_PXP,
+ .end = IRQ_PXP,
+ },
+};
+
+struct platform_device stmp378x_pxp = {
+ .name = "stmp3xxx-pxp",
+ .id = -1,
+ .dev = {
+ .dma_mask = &common_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(pxp_resource),
+ .resource = pxp_resource,
+};
+
+static struct resource i2c_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_I2C_ERROR,
+ .end = IRQ_I2C_ERROR,
+ }, {
+ .flags = IORESOURCE_MEM,
+ .start = REGS_I2C_PHYS,
+ .end = REGS_I2C_PHYS + REGS_I2C_SIZE,
+ }, {
+ .flags = IORESOURCE_DMA,
+ .start = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
+ .end = STMP3XXX_DMA(3, STMP3XXX_BUS_APBX),
+ },
+};
+
+struct platform_device stmp378x_i2c = {
+ .name = "i2c_stmp3xxx",
+ .id = 0,
+ .dev = {
+ .dma_mask = &common_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = i2c_resources,
+ .num_resources = ARRAY_SIZE(i2c_resources),
+};
+
+void __init stmp378x_map_io(void)
+{
+ iotable_init(stmp378x_io_desc, ARRAY_SIZE(stmp378x_io_desc));
+}
diff --git a/arch/arm/mach-stmp378x/stmp378x.h b/arch/arm/mach-stmp378x/stmp378x.h
new file mode 100644
index 0000000..0dc15b3
--- /dev/null
+++ b/arch/arm/mach-stmp378x/stmp378x.h
@@ -0,0 +1,25 @@
+/*
+ * Freescale STMP37XX/STMP378X internal functions and data declarations
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __MACH_STMP378X_H
+#define __MACH_STMP378X_H
+
+void stmp378x_map_io(void);
+void stmp378x_init_irq(void);
+
+extern struct platform_device stmp378x_pxp, stmp378x_i2c;
+#endif /* __MACH_STMP378X_COMMON_H */
diff --git a/arch/arm/mach-stmp378x/stmp378x_devb.c b/arch/arm/mach-stmp378x/stmp378x_devb.c
new file mode 100644
index 0000000..90d8fe6
--- /dev/null
+++ b/arch/arm/mach-stmp378x/stmp378x_devb.c
@@ -0,0 +1,334 @@
+/*
+ * Freescale STMP378X development board support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/spi/spi.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+#include <mach/platform.h>
+#include <mach/stmp3xxx.h>
+#include <mach/mmc.h>
+#include <mach/gpmi.h>
+
+#include "stmp378x.h"
+
+static struct platform_device *devices[] = {
+ &stmp3xxx_dbguart,
+ &stmp3xxx_appuart,
+ &stmp3xxx_watchdog,
+ &stmp3xxx_touchscreen,
+ &stmp3xxx_rtc,
+ &stmp3xxx_keyboard,
+ &stmp3xxx_framebuffer,
+ &stmp3xxx_backlight,
+ &stmp3xxx_rotdec,
+ &stmp3xxx_persistent,
+ &stmp3xxx_dcp_bootstream,
+ &stmp3xxx_dcp,
+ &stmp3xxx_battery,
+ &stmp378x_pxp,
+ &stmp378x_i2c,
+};
+
+static struct pin_desc i2c_pins_desc[] = {
+ { PINID_I2C_SCL, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_I2C_SDA, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+};
+
+static struct pin_group i2c_pins = {
+ .pins = i2c_pins_desc,
+ .nr_pins = ARRAY_SIZE(i2c_pins_desc),
+};
+
+static struct pin_desc dbguart_pins_0[] = {
+ { PINID_PWM0, PIN_FUN3, },
+ { PINID_PWM1, PIN_FUN3, },
+};
+
+static struct pin_group dbguart_pins[] = {
+ [0] = {
+ .pins = dbguart_pins_0,
+ .nr_pins = ARRAY_SIZE(dbguart_pins_0),
+ },
+};
+
+static int dbguart_pins_control(int id, int request)
+{
+ int r = 0;
+
+ if (request)
+ r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
+ else
+ stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
+ return r;
+}
+
+static struct pin_desc appuart_pins_0[] = {
+ { PINID_AUART1_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+ { PINID_AUART1_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+ { PINID_AUART1_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+ { PINID_AUART1_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+};
+
+static struct pin_desc appuart_pins_1[] = {
+#if 0 /* enable these when second appuart will be connected */
+ { PINID_AUART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+ { PINID_AUART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+ { PINID_AUART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+ { PINID_AUART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+#endif
+};
+
+static struct pin_desc mmc_pins_desc[] = {
+ { PINID_SSP1_DATA0, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+ { PINID_SSP1_DATA1, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+ { PINID_SSP1_DATA2, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+ { PINID_SSP1_DATA3, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+ { PINID_SSP1_CMD, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
+ { PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
+ { PINID_SSP1_DETECT, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
+};
+
+static struct pin_group mmc_pins = {
+ .pins = mmc_pins_desc,
+ .nr_pins = ARRAY_SIZE(mmc_pins_desc),
+};
+
+static int stmp3xxxmmc_get_wp(void)
+{
+ return gpio_get_value(PINID_PWM4);
+}
+
+static int stmp3xxxmmc_hw_init_ssp1(void)
+{
+ int ret;
+
+ ret = stmp3xxx_request_pin_group(&mmc_pins, "mmc");
+ if (ret)
+ goto out;
+
+ /* Configure write protect GPIO pin */
+ ret = gpio_request(PINID_PWM4, "mmc wp");
+ if (ret)
+ goto out_wp;
+
+ gpio_direction_input(PINID_PWM4);
+
+ /* Configure POWER pin as gpio to drive power to MMC slot */
+ ret = gpio_request(PINID_PWM3, "mmc power");
+ if (ret)
+ goto out_power;
+
+ gpio_direction_output(PINID_PWM3, 0);
+ mdelay(100);
+
+ return 0;
+
+out_power:
+ gpio_free(PINID_PWM4);
+out_wp:
+ stmp3xxx_release_pin_group(&mmc_pins, "mmc");
+out:
+ return ret;
+}
+
+static void stmp3xxxmmc_hw_release_ssp1(void)
+{
+ gpio_free(PINID_PWM3);
+ gpio_free(PINID_PWM4);
+ stmp3xxx_release_pin_group(&mmc_pins, "mmc");
+}
+
+static void stmp3xxxmmc_cmd_pullup_ssp1(int enable)
+{
+ stmp3xxx_pin_pullup(PINID_SSP1_CMD, enable, "mmc");
+}
+
+static unsigned long
+stmp3xxxmmc_setclock_ssp1(void __iomem *base, unsigned long hz)
+{
+ struct clk *ssp, *parent;
+ char *p;
+ long r;
+
+ ssp = clk_get(NULL, "ssp");
+
+ /* using SSP1, no timeout, clock rate 1 */
+ writel(BF(2, SSP_TIMING_CLOCK_DIVIDE) |
+ BF(0xFFFF, SSP_TIMING_TIMEOUT),
+ base + HW_SSP_TIMING);
+
+ p = (hz > 1000000) ? "io" : "osc_24M";
+ parent = clk_get(NULL, p);
+ clk_set_parent(ssp, parent);
+ r = clk_set_rate(ssp, 2 * hz / 1000);
+ clk_put(parent);
+ clk_put(ssp);
+
+ return hz;
+}
+
+static struct stmp3xxxmmc_platform_data mmc_data = {
+ .hw_init = stmp3xxxmmc_hw_init_ssp1,
+ .hw_release = stmp3xxxmmc_hw_release_ssp1,
+ .get_wp = stmp3xxxmmc_get_wp,
+ .cmd_pullup = stmp3xxxmmc_cmd_pullup_ssp1,
+ .setclock = stmp3xxxmmc_setclock_ssp1,
+};
+
+
+static struct pin_group appuart_pins[] = {
+ [0] = {
+ .pins = appuart_pins_0,
+ .nr_pins = ARRAY_SIZE(appuart_pins_0),
+ },
+ [1] = {
+ .pins = appuart_pins_1,
+ .nr_pins = ARRAY_SIZE(appuart_pins_1),
+ },
+};
+
+static struct pin_desc ssp1_pins_desc[] = {
+ { PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0, },
+ { PINID_SSP1_CMD, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
+ { PINID_SSP1_DATA0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
+ { PINID_SSP1_DATA3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
+};
+
+static struct pin_desc ssp2_pins_desc[] = {
+ { PINID_GPMI_WRN, PIN_FUN3, PIN_8MA, PIN_3_3V, 0, },
+ { PINID_GPMI_RDY1, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
+ { PINID_GPMI_D00, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
+ { PINID_GPMI_D03, PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
+};
+
+static struct pin_group ssp1_pins = {
+ .pins = ssp1_pins_desc,
+ .nr_pins = ARRAY_SIZE(ssp1_pins_desc),
+};
+
+static struct pin_group ssp2_pins = {
+ .pins = ssp1_pins_desc,
+ .nr_pins = ARRAY_SIZE(ssp2_pins_desc),
+};
+
+static struct pin_desc gpmi_pins_desc[] = {
+ { PINID_GPMI_CE0N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GPMI_CE1N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GMPI_CE2N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GPMI_CLE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GPMI_ALE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GPMI_WPN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
+ { PINID_GPMI_RDY1, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GPMI_D00, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GPMI_D01, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GPMI_D02, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GPMI_D03, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GPMI_D04, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GPMI_D05, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GPMI_D06, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GPMI_D07, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GPMI_RDY0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GPMI_RDY2, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GPMI_RDY3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
+ { PINID_GPMI_WRN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
+ { PINID_GPMI_RDN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
+};
+
+static struct pin_group gpmi_pins = {
+ .pins = gpmi_pins_desc,
+ .nr_pins = ARRAY_SIZE(gpmi_pins_desc),
+};
+
+static struct mtd_partition gpmi_partitions[] = {
+ [0] = {
+ .name = "boot",
+ .size = 10 * SZ_1M,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "data",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
+};
+
+static struct gpmi_platform_data gpmi_data = {
+ .pins = &gpmi_pins,
+ .nr_parts = ARRAY_SIZE(gpmi_partitions),
+ .parts = gpmi_partitions,
+ .part_types = { "cmdline", NULL },
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+ {
+ .modalias = "enc28j60",
+ .max_speed_hz = 6 * 1000 * 1000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = NULL,
+ },
+#endif
+};
+
+static void __init stmp378x_devb_init(void)
+{
+ stmp3xxx_pinmux_init(NR_REAL_IRQS);
+
+ /* init stmp3xxx platform */
+ stmp3xxx_init();
+
+ stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
+ stmp3xxx_appuart.dev.platform_data = appuart_pins;
+ stmp3xxx_mmc.dev.platform_data = &mmc_data;
+ stmp3xxx_gpmi.dev.platform_data = &gpmi_data;
+ stmp3xxx_spi1.dev.platform_data = &ssp1_pins;
+ stmp3xxx_spi2.dev.platform_data = &ssp2_pins;
+ stmp378x_i2c.dev.platform_data = &i2c_pins;
+
+ /* register spi devices */
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+ /* add board's devices */
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ /* add devices selected by command line ssp1= and ssp2= options */
+ stmp3xxx_ssp1_device_register();
+ stmp3xxx_ssp2_device_register();
+}
+
+MACHINE_START(STMP378X, "STMP378X")
+ .phys_io = 0x80000000,
+ .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc,
+ .boot_params = 0x40000100,
+ .map_io = stmp378x_map_io,
+ .init_irq = stmp378x_init_irq,
+ .timer = &stmp3xxx_timer,
+ .init_machine = stmp378x_devb_init,
+MACHINE_END
diff --git a/arch/arm/mach-stmp37xx/Makefile b/arch/arm/mach-stmp37xx/Makefile
new file mode 100644
index 0000000..57deffd
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ARCH_STMP37XX) += stmp37xx.o
+obj-$(CONFIG_MACH_STMP37XX) += stmp37xx_devb.o
diff --git a/arch/arm/mach-stmp37xx/Makefile.boot b/arch/arm/mach-stmp37xx/Makefile.boot
new file mode 100644
index 0000000..1568ad4
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x40008000
+params_phys-y := 0x40000100
+initrd_phys-y := 0x40800000
diff --git a/arch/arm/mach-stmp37xx/include/mach/entry-macro.S b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S
new file mode 100644
index 0000000..fed2787
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/entry-macro.S
@@ -0,0 +1,37 @@
+/*
+ * Low-level IRQ helper macros for Freescale STMP37XX
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ mov \base, #0xf0000000 @ vm address of IRQ controller
+ ldr \irqnr, [\base, #0x30] @ HW_ICOLL_STAT
+ cmp \irqnr, #0x3f
+ movne \irqstat, #0 @ Ack this IRQ
+ strne \irqstat, [\base, #0x00]@ HW_ICOLL_VECTOR
+ moveqs \irqnr, #0 @ Zero flag set for no IRQ
+
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
diff --git a/arch/arm/mach-stmp37xx/include/mach/irqs.h b/arch/arm/mach-stmp37xx/include/mach/irqs.h
new file mode 100644
index 0000000..98f1293
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/irqs.h
@@ -0,0 +1,99 @@
+/*
+ * Freescale STMP37XX interrupts
+ *
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef _ASM_ARCH_IRQS_H
+#define _ASM_ARCH_IRQS_H
+
+#define IRQ_DEBUG_UART 0
+#define IRQ_COMMS_RX 1
+#define IRQ_COMMS_TX 1
+#define IRQ_SSP2_ERROR 2
+#define IRQ_VDD5V 3
+#define IRQ_HEADPHONE_SHORT 4
+#define IRQ_DAC_DMA 5
+#define IRQ_DAC_ERROR 6
+#define IRQ_ADC_DMA 7
+#define IRQ_ADC_ERROR 8
+#define IRQ_SPDIF_DMA 9
+#define IRQ_SAIF2_DMA 9
+#define IRQ_SPDIF_ERROR 10
+#define IRQ_SAIF1_IRQ 10
+#define IRQ_SAIF2_IRQ 10
+#define IRQ_USB_CTRL 11
+#define IRQ_USB_WAKEUP 12
+#define IRQ_GPMI_DMA 13
+#define IRQ_SSP1_DMA 14
+#define IRQ_SSP_ERROR 15
+#define IRQ_GPIO0 16
+#define IRQ_GPIO1 17
+#define IRQ_GPIO2 18
+#define IRQ_SAIF1_DMA 19
+#define IRQ_SSP2_DMA 20
+#define IRQ_ECC8_IRQ 21
+#define IRQ_RTC_ALARM 22
+#define IRQ_UARTAPP_TX_DMA 23
+#define IRQ_UARTAPP_INTERNAL 24
+#define IRQ_UARTAPP_RX_DMA 25
+#define IRQ_I2C_DMA 26
+#define IRQ_I2C_ERROR 27
+#define IRQ_TIMER0 28
+#define IRQ_TIMER1 29
+#define IRQ_TIMER2 30
+#define IRQ_TIMER3 31
+#define IRQ_BATT_BRNOUT 32
+#define IRQ_VDDD_BRNOUT 33
+#define IRQ_VDDIO_BRNOUT 34
+#define IRQ_VDD18_BRNOUT 35
+#define IRQ_TOUCH_DETECT 36
+#define IRQ_LRADC_CH0 37
+#define IRQ_LRADC_CH1 38
+#define IRQ_LRADC_CH2 39
+#define IRQ_LRADC_CH3 40
+#define IRQ_LRADC_CH4 41
+#define IRQ_LRADC_CH5 42
+#define IRQ_LRADC_CH6 43
+#define IRQ_LRADC_CH7 44
+#define IRQ_LCDIF_DMA 45
+#define IRQ_LCDIF_ERROR 46
+#define IRQ_DIGCTL_DEBUG_TRAP 47
+#define IRQ_RTC_1MSEC 48
+#define IRQ_DRI_DMA 49
+#define IRQ_DRI_ATTENTION 50
+#define IRQ_GPMI_ATTENTION 51
+#define IRQ_IR 52
+#define IRQ_DCP_VMI 53
+#define IRQ_DCP 54
+#define IRQ_RESERVED_55 55
+#define IRQ_RESERVED_56 56
+#define IRQ_RESERVED_57 57
+#define IRQ_RESERVED_58 58
+#define IRQ_RESERVED_59 59
+#define SW_IRQ_60 60
+#define SW_IRQ_61 61
+#define SW_IRQ_62 62
+#define SW_IRQ_63 63
+
+#define NR_REAL_IRQS 64
+#define NR_IRQS (NR_REAL_IRQS + 32 * 3)
+
+/* TIMER and BRNOUT are FIQ capable */
+#define FIQ_START IRQ_TIMER0
+
+/* Hard disk IRQ is a GPMI attention IRQ */
+#define IRQ_HARDDISK IRQ_GPMI_ATTENTION
+
+#endif /* _ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-stmp37xx/include/mach/pins.h b/arch/arm/mach-stmp37xx/include/mach/pins.h
new file mode 100644
index 0000000..d56de0c
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/pins.h
@@ -0,0 +1,147 @@
+/*
+ * Freescale STMP37XX SoC pin multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_PINS_H
+#define __ASM_ARCH_PINS_H
+
+/*
+ * Define all STMP37XX pins, a pin name corresponds to a STMP37xx hardware
+ * interface this pin belongs to.
+ */
+
+/* Bank 0 */
+#define PINID_GPMI_D00 STMP3XXX_PINID(0, 0)
+#define PINID_GPMI_D01 STMP3XXX_PINID(0, 1)
+#define PINID_GPMI_D02 STMP3XXX_PINID(0, 2)
+#define PINID_GPMI_D03 STMP3XXX_PINID(0, 3)
+#define PINID_GPMI_D04 STMP3XXX_PINID(0, 4)
+#define PINID_GPMI_D05 STMP3XXX_PINID(0, 5)
+#define PINID_GPMI_D06 STMP3XXX_PINID(0, 6)
+#define PINID_GPMI_D07 STMP3XXX_PINID(0, 7)
+#define PINID_GPMI_D08 STMP3XXX_PINID(0, 8)
+#define PINID_GPMI_D09 STMP3XXX_PINID(0, 9)
+#define PINID_GPMI_D10 STMP3XXX_PINID(0, 10)
+#define PINID_GPMI_D11 STMP3XXX_PINID(0, 11)
+#define PINID_GPMI_D12 STMP3XXX_PINID(0, 12)
+#define PINID_GPMI_D13 STMP3XXX_PINID(0, 13)
+#define PINID_GPMI_D14 STMP3XXX_PINID(0, 14)
+#define PINID_GPMI_D15 STMP3XXX_PINID(0, 15)
+#define PINID_GPMI_A0 STMP3XXX_PINID(0, 16)
+#define PINID_GPMI_A1 STMP3XXX_PINID(0, 17)
+#define PINID_GPMI_A2 STMP3XXX_PINID(0, 18)
+#define PINID_GPMI_RDY0 STMP3XXX_PINID(0, 19)
+#define PINID_GPMI_RDY2 STMP3XXX_PINID(0, 20)
+#define PINID_GPMI_RDY3 STMP3XXX_PINID(0, 21)
+#define PINID_GPMI_RESETN STMP3XXX_PINID(0, 22)
+#define PINID_GPMI_IRQ STMP3XXX_PINID(0, 23)
+#define PINID_GPMI_WRN STMP3XXX_PINID(0, 24)
+#define PINID_GPMI_RDN STMP3XXX_PINID(0, 25)
+#define PINID_UART2_CTS STMP3XXX_PINID(0, 26)
+#define PINID_UART2_RTS STMP3XXX_PINID(0, 27)
+#define PINID_UART2_RX STMP3XXX_PINID(0, 28)
+#define PINID_UART2_TX STMP3XXX_PINID(0, 29)
+
+/* Bank 1 */
+#define PINID_LCD_D00 STMP3XXX_PINID(1, 0)
+#define PINID_LCD_D01 STMP3XXX_PINID(1, 1)
+#define PINID_LCD_D02 STMP3XXX_PINID(1, 2)
+#define PINID_LCD_D03 STMP3XXX_PINID(1, 3)
+#define PINID_LCD_D04 STMP3XXX_PINID(1, 4)
+#define PINID_LCD_D05 STMP3XXX_PINID(1, 5)
+#define PINID_LCD_D06 STMP3XXX_PINID(1, 6)
+#define PINID_LCD_D07 STMP3XXX_PINID(1, 7)
+#define PINID_LCD_D08 STMP3XXX_PINID(1, 8)
+#define PINID_LCD_D09 STMP3XXX_PINID(1, 9)
+#define PINID_LCD_D10 STMP3XXX_PINID(1, 10)
+#define PINID_LCD_D11 STMP3XXX_PINID(1, 11)
+#define PINID_LCD_D12 STMP3XXX_PINID(1, 12)
+#define PINID_LCD_D13 STMP3XXX_PINID(1, 13)
+#define PINID_LCD_D14 STMP3XXX_PINID(1, 14)
+#define PINID_LCD_D15 STMP3XXX_PINID(1, 15)
+#define PINID_LCD_RESET STMP3XXX_PINID(1, 16)
+#define PINID_LCD_RS STMP3XXX_PINID(1, 17)
+#define PINID_LCD_WR_RWN STMP3XXX_PINID(1, 18)
+#define PINID_LCD_RD_E STMP3XXX_PINID(1, 19)
+#define PINID_LCD_CS STMP3XXX_PINID(1, 20)
+#define PINID_LCD_BUSY STMP3XXX_PINID(1, 21)
+#define PINID_SSP1_CMD STMP3XXX_PINID(1, 22)
+#define PINID_SSP1_SCK STMP3XXX_PINID(1, 23)
+#define PINID_SSP1_DATA0 STMP3XXX_PINID(1, 24)
+#define PINID_SSP1_DATA1 STMP3XXX_PINID(1, 25)
+#define PINID_SSP1_DATA2 STMP3XXX_PINID(1, 26)
+#define PINID_SSP1_DATA3 STMP3XXX_PINID(1, 27)
+#define PINID_SSP1_DETECT STMP3XXX_PINID(1, 28)
+
+/* Bank 2 */
+#define PINID_PWM0 STMP3XXX_PINID(2, 0)
+#define PINID_PWM1 STMP3XXX_PINID(2, 1)
+#define PINID_PWM2 STMP3XXX_PINID(2, 2)
+#define PINID_PWM3 STMP3XXX_PINID(2, 3)
+#define PINID_PWM4 STMP3XXX_PINID(2, 4)
+#define PINID_I2C_SCL STMP3XXX_PINID(2, 5)
+#define PINID_I2C_SDA STMP3XXX_PINID(2, 6)
+#define PINID_ROTTARYA STMP3XXX_PINID(2, 7)
+#define PINID_ROTTARYB STMP3XXX_PINID(2, 8)
+#define PINID_EMI_CKE STMP3XXX_PINID(2, 9)
+#define PINID_EMI_RASN STMP3XXX_PINID(2, 10)
+#define PINID_EMI_CASN STMP3XXX_PINID(2, 11)
+#define PINID_EMI_CE0N STMP3XXX_PINID(2, 12)
+#define PINID_EMI_CE1N STMP3XXX_PINID(2, 13)
+#define PINID_EMI_CE2N STMP3XXX_PINID(2, 14)
+#define PINID_EMI_CE3N STMP3XXX_PINID(2, 15)
+#define PINID_EMI_A00 STMP3XXX_PINID(2, 16)
+#define PINID_EMI_A01 STMP3XXX_PINID(2, 17)
+#define PINID_EMI_A02 STMP3XXX_PINID(2, 18)
+#define PINID_EMI_A03 STMP3XXX_PINID(2, 19)
+#define PINID_EMI_A04 STMP3XXX_PINID(2, 20)
+#define PINID_EMI_A05 STMP3XXX_PINID(2, 21)
+#define PINID_EMI_A06 STMP3XXX_PINID(2, 22)
+#define PINID_EMI_A07 STMP3XXX_PINID(2, 23)
+#define PINID_EMI_A08 STMP3XXX_PINID(2, 24)
+#define PINID_EMI_A09 STMP3XXX_PINID(2, 25)
+#define PINID_EMI_A10 STMP3XXX_PINID(2, 26)
+#define PINID_EMI_A11 STMP3XXX_PINID(2, 27)
+#define PINID_EMI_A12 STMP3XXX_PINID(2, 28)
+#define PINID_EMI_A13 STMP3XXX_PINID(2, 29)
+#define PINID_EMI_A14 STMP3XXX_PINID(2, 30)
+#define PINID_EMI_WEN STMP3XXX_PINID(2, 31)
+
+/* Bank 3 */
+#define PINID_EMI_D00 STMP3XXX_PINID(3, 0)
+#define PINID_EMI_D01 STMP3XXX_PINID(3, 1)
+#define PINID_EMI_D02 STMP3XXX_PINID(3, 2)
+#define PINID_EMI_D03 STMP3XXX_PINID(3, 3)
+#define PINID_EMI_D04 STMP3XXX_PINID(3, 4)
+#define PINID_EMI_D05 STMP3XXX_PINID(3, 5)
+#define PINID_EMI_D06 STMP3XXX_PINID(3, 6)
+#define PINID_EMI_D07 STMP3XXX_PINID(3, 7)
+#define PINID_EMI_D08 STMP3XXX_PINID(3, 8)
+#define PINID_EMI_D09 STMP3XXX_PINID(3, 9)
+#define PINID_EMI_D10 STMP3XXX_PINID(3, 10)
+#define PINID_EMI_D11 STMP3XXX_PINID(3, 11)
+#define PINID_EMI_D12 STMP3XXX_PINID(3, 12)
+#define PINID_EMI_D13 STMP3XXX_PINID(3, 13)
+#define PINID_EMI_D14 STMP3XXX_PINID(3, 14)
+#define PINID_EMI_D15 STMP3XXX_PINID(3, 15)
+#define PINID_EMI_DQS0 STMP3XXX_PINID(3, 16)
+#define PINID_EMI_DQS1 STMP3XXX_PINID(3, 17)
+#define PINID_EMI_DQM0 STMP3XXX_PINID(3, 18)
+#define PINID_EMI_DQM1 STMP3XXX_PINID(3, 19)
+#define PINID_EMI_CLK STMP3XXX_PINID(3, 20)
+#define PINID_EMI_CLKN STMP3XXX_PINID(3, 21)
+
+#endif /* __ASM_ARCH_PINS_H */
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h
new file mode 100644
index 0000000..a323aa9
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-apbh.h
@@ -0,0 +1,97 @@
+/*
+ * stmp37xx: APBH register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBH
+#define _MACH_REGS_APBH
+
+#define REGS_APBH_BASE (STMP3XXX_REGS_BASE + 0x4000)
+
+#define HW_APBH_CTRL0 0x0
+#define BM_APBH_CTRL0_RESET_CHANNEL 0x00FF0000
+#define BP_APBH_CTRL0_RESET_CHANNEL 16
+#define BM_APBH_CTRL0_CLKGATE 0x40000000
+#define BM_APBH_CTRL0_SFTRST 0x80000000
+
+#define HW_APBH_CTRL1 0x10
+#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0x00000001
+#define BP_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0
+
+#define HW_APBH_DEVSEL 0x20
+
+#define HW_APBH_CH0_NXTCMDAR (0x50 + 0 * 0x70)
+#define HW_APBH_CH1_NXTCMDAR (0x50 + 1 * 0x70)
+#define HW_APBH_CH2_NXTCMDAR (0x50 + 2 * 0x70)
+#define HW_APBH_CH3_NXTCMDAR (0x50 + 3 * 0x70)
+#define HW_APBH_CH4_NXTCMDAR (0x50 + 4 * 0x70)
+#define HW_APBH_CH5_NXTCMDAR (0x50 + 5 * 0x70)
+#define HW_APBH_CH6_NXTCMDAR (0x50 + 6 * 0x70)
+#define HW_APBH_CH7_NXTCMDAR (0x50 + 7 * 0x70)
+#define HW_APBH_CH8_NXTCMDAR (0x50 + 8 * 0x70)
+#define HW_APBH_CH9_NXTCMDAR (0x50 + 9 * 0x70)
+#define HW_APBH_CH10_NXTCMDAR (0x50 + 10 * 0x70)
+#define HW_APBH_CH11_NXTCMDAR (0x50 + 11 * 0x70)
+#define HW_APBH_CH12_NXTCMDAR (0x50 + 12 * 0x70)
+#define HW_APBH_CH13_NXTCMDAR (0x50 + 13 * 0x70)
+#define HW_APBH_CH14_NXTCMDAR (0x50 + 14 * 0x70)
+#define HW_APBH_CH15_NXTCMDAR (0x50 + 15 * 0x70)
+
+#define HW_APBH_CHn_NXTCMDAR 0x50
+
+#define BM_APBH_CHn_CMD_MODE 0x00000003
+#define BP_APBH_CHn_CMD_MODE 0x00000001
+#define BV_APBH_CHn_CMD_MODE_NOOP 0
+#define BV_APBH_CHn_CMD_MODE_WRITE 1
+#define BV_APBH_CHn_CMD_MODE_READ 2
+#define BV_APBH_CHn_CMD_MODE_SENSE 3
+#define BM_APBH_CHn_CMD_CHAIN 0x00000004
+#define BM_APBH_CHn_CMD_IRQONCMPLT 0x00000008
+#define BM_APBH_CHn_CMD_NANDLOCK 0x00000010
+#define BM_APBH_CHn_CMD_NANDWAIT4READY 0x00000020
+#define BM_APBH_CHn_CMD_SEMAPHORE 0x00000040
+#define BM_APBH_CHn_CMD_WAIT4ENDCMD 0x00000080
+#define BM_APBH_CHn_CMD_CMDWORDS 0x0000F000
+#define BP_APBH_CHn_CMD_CMDWORDS 12
+#define BM_APBH_CHn_CMD_XFER_COUNT 0xFFFF0000
+#define BP_APBH_CHn_CMD_XFER_COUNT 16
+
+#define HW_APBH_CH0_SEMA (0x80 + 0 * 0x70)
+#define HW_APBH_CH1_SEMA (0x80 + 1 * 0x70)
+#define HW_APBH_CH2_SEMA (0x80 + 2 * 0x70)
+#define HW_APBH_CH3_SEMA (0x80 + 3 * 0x70)
+#define HW_APBH_CH4_SEMA (0x80 + 4 * 0x70)
+#define HW_APBH_CH5_SEMA (0x80 + 5 * 0x70)
+#define HW_APBH_CH6_SEMA (0x80 + 6 * 0x70)
+#define HW_APBH_CH7_SEMA (0x80 + 7 * 0x70)
+#define HW_APBH_CH8_SEMA (0x80 + 8 * 0x70)
+#define HW_APBH_CH9_SEMA (0x80 + 9 * 0x70)
+#define HW_APBH_CH10_SEMA (0x80 + 10 * 0x70)
+#define HW_APBH_CH11_SEMA (0x80 + 11 * 0x70)
+#define HW_APBH_CH12_SEMA (0x80 + 12 * 0x70)
+#define HW_APBH_CH13_SEMA (0x80 + 13 * 0x70)
+#define HW_APBH_CH14_SEMA (0x80 + 14 * 0x70)
+#define HW_APBH_CH15_SEMA (0x80 + 15 * 0x70)
+
+#define HW_APBH_CHn_SEMA 0x80
+#define BM_APBH_CHn_SEMA_INCREMENT_SEMA 0x000000FF
+#define BP_APBH_CHn_SEMA_INCREMENT_SEMA 0
+#define BM_APBH_CHn_SEMA_PHORE 0x00FF0000
+#define BP_APBH_CHn_SEMA_PHORE 16
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h
new file mode 100644
index 0000000..6d080cd
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-apbx.h
@@ -0,0 +1,113 @@
+/*
+ * stmp37xx: APBX register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _MACH_REGS_APBX
+#define _MACH_REGS_APBX
+
+#define REGS_APBX_BASE (STMP3XXX_REGS_BASE + 0x24000)
+
+#define HW_APBX_CTRL0 0x0
+#define BM_APBX_CTRL0_RESET_CHANNEL 0x00FF0000
+#define BP_APBX_CTRL0_RESET_CHANNEL 16
+#define BM_APBX_CTRL0_CLKGATE 0x40000000
+#define BM_APBX_CTRL0_SFTRST 0x80000000
+
+#define HW_APBX_CTRL1 0x10
+
+#define HW_APBX_DEVSEL 0x20
+
+#define HW_APBX_CH0_NXTCMDAR (0x50 + 0 * 0x70)
+#define HW_APBX_CH1_NXTCMDAR (0x50 + 1 * 0x70)
+#define HW_APBX_CH2_NXTCMDAR (0x50 + 2 * 0x70)
+#define HW_APBX_CH3_NXTCMDAR (0x50 + 3 * 0x70)
+#define HW_APBX_CH4_NXTCMDAR (0x50 + 4 * 0x70)
+#define HW_APBX_CH5_NXTCMDAR (0x50 + 5 * 0x70)
+#define HW_APBX_CH6_NXTCMDAR (0x50 + 6 * 0x70)
+#define HW_APBX_CH7_NXTCMDAR (0x50 + 7 * 0x70)
+#define HW_APBX_CH8_NXTCMDAR (0x50 + 8 * 0x70)
+#define HW_APBX_CH9_NXTCMDAR (0x50 + 9 * 0x70)
+#define HW_APBX_CH10_NXTCMDAR (0x50 + 10 * 0x70)
+#define HW_APBX_CH11_NXTCMDAR (0x50 + 11 * 0x70)
+#define HW_APBX_CH12_NXTCMDAR (0x50 + 12 * 0x70)
+#define HW_APBX_CH13_NXTCMDAR (0x50 + 13 * 0x70)
+#define HW_APBX_CH14_NXTCMDAR (0x50 + 14 * 0x70)
+#define HW_APBX_CH15_NXTCMDAR (0x50 + 15 * 0x70)
+
+#define HW_APBX_CHn_NXTCMDAR 0x50
+#define BM_APBX_CHn_CMD_MODE 0x00000003
+#define BP_APBX_CHn_CMD_MODE 0x00000001
+#define BV_APBX_CHn_CMD_MODE_NOOP 0
+#define BV_APBX_CHn_CMD_MODE_WRITE 1
+#define BV_APBX_CHn_CMD_MODE_READ 2
+#define BV_APBX_CHn_CMD_MODE_SENSE 3
+#define BM_APBX_CHn_CMD_COMMAND 0x00000003
+#define BP_APBX_CHn_CMD_COMMAND 0
+#define BM_APBX_CHn_CMD_CHAIN 0x00000004
+#define BM_APBX_CHn_CMD_IRQONCMPLT 0x00000008
+#define BM_APBX_CHn_CMD_SEMAPHORE 0x00000040
+#define BM_APBX_CHn_CMD_WAIT4ENDCMD 0x00000080
+#define BM_APBX_CHn_CMD_CMDWORDS 0x0000F000
+#define BP_APBX_CHn_CMD_CMDWORDS 12
+#define BM_APBX_CHn_CMD_XFER_COUNT 0xFFFF0000
+#define BP_APBX_CHn_CMD_XFER_COUNT 16
+
+#define HW_APBX_CH0_BAR (0x70 + 0 * 0x70)
+#define HW_APBX_CH1_BAR (0x70 + 1 * 0x70)
+#define HW_APBX_CH2_BAR (0x70 + 2 * 0x70)
+#define HW_APBX_CH3_BAR (0x70 + 3 * 0x70)
+#define HW_APBX_CH4_BAR (0x70 + 4 * 0x70)
+#define HW_APBX_CH5_BAR (0x70 + 5 * 0x70)
+#define HW_APBX_CH6_BAR (0x70 + 6 * 0x70)
+#define HW_APBX_CH7_BAR (0x70 + 7 * 0x70)
+#define HW_APBX_CH8_BAR (0x70 + 8 * 0x70)
+#define HW_APBX_CH9_BAR (0x70 + 9 * 0x70)
+#define HW_APBX_CH10_BAR (0x70 + 10 * 0x70)
+#define HW_APBX_CH11_BAR (0x70 + 11 * 0x70)
+#define HW_APBX_CH12_BAR (0x70 + 12 * 0x70)
+#define HW_APBX_CH13_BAR (0x70 + 13 * 0x70)
+#define HW_APBX_CH14_BAR (0x70 + 14 * 0x70)
+#define HW_APBX_CH15_BAR (0x70 + 15 * 0x70)
+
+#define HW_APBX_CHn_BAR 0x70
+
+#define HW_APBX_CH0_SEMA (0x80 + 0 * 0x70)
+#define HW_APBX_CH1_SEMA (0x80 + 1 * 0x70)
+#define HW_APBX_CH2_SEMA (0x80 + 2 * 0x70)
+#define HW_APBX_CH3_SEMA (0x80 + 3 * 0x70)
+#define HW_APBX_CH4_SEMA (0x80 + 4 * 0x70)
+#define HW_APBX_CH5_SEMA (0x80 + 5 * 0x70)
+#define HW_APBX_CH6_SEMA (0x80 + 6 * 0x70)
+#define HW_APBX_CH7_SEMA (0x80 + 7 * 0x70)
+#define HW_APBX_CH8_SEMA (0x80 + 8 * 0x70)
+#define HW_APBX_CH9_SEMA (0x80 + 9 * 0x70)
+#define HW_APBX_CH10_SEMA (0x80 + 10 * 0x70)
+#define HW_APBX_CH11_SEMA (0x80 + 11 * 0x70)
+#define HW_APBX_CH12_SEMA (0x80 + 12 * 0x70)
+#define HW_APBX_CH13_SEMA (0x80 + 13 * 0x70)
+#define HW_APBX_CH14_SEMA (0x80 + 14 * 0x70)
+#define HW_APBX_CH15_SEMA (0x80 + 15 * 0x70)
+
+#define HW_APBX_CHn_SEMA 0x80
+#define BM_APBX_CHn_SEMA_INCREMENT_SEMA 0x000000FF
+#define BP_APBX_CHn_SEMA_INCREMENT_SEMA 0
+#define BM_APBX_CHn_SEMA_PHORE 0x00FF0000
+#define BP_APBX_CHn_SEMA_PHORE 16
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h b/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h
new file mode 100644
index 0000000..3b511f9
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-audioin.h
@@ -0,0 +1,61 @@
+/*
+ * stmp37xx: AUDIOIN register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_AUDIOIN_BASE (STMP3XXX_REGS_BASE + 0x4C000)
+
+#define HW_AUDIOIN_CTRL 0x0
+#define BM_AUDIOIN_CTRL_RUN 0x00000001
+#define BP_AUDIOIN_CTRL_RUN 0
+#define BM_AUDIOIN_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
+#define BM_AUDIOIN_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
+#define BM_AUDIOIN_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
+#define BM_AUDIOIN_CTRL_WORD_LENGTH 0x00000020
+#define BM_AUDIOIN_CTRL_CLKGATE 0x40000000
+#define BM_AUDIOIN_CTRL_SFTRST 0x80000000
+
+#define HW_AUDIOIN_STAT 0x10
+
+#define HW_AUDIOIN_ADCSRR 0x20
+
+#define HW_AUDIOIN_ADCVOLUME 0x30
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0x000000FF
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_RIGHT 0
+#define BM_AUDIOIN_ADCVOLUME_VOLUME_LEFT 0x00FF0000
+#define BP_AUDIOIN_ADCVOLUME_VOLUME_LEFT 16
+
+#define HW_AUDIOIN_ADCDEBUG 0x40
+
+#define HW_AUDIOIN_ADCVOL 0x50
+#define BM_AUDIOIN_ADCVOL_GAIN_RIGHT 0x0000000F
+#define BP_AUDIOIN_ADCVOL_GAIN_RIGHT 0
+#define BM_AUDIOIN_ADCVOL_SELECT_RIGHT 0x00000030
+#define BP_AUDIOIN_ADCVOL_SELECT_RIGHT 4
+#define BM_AUDIOIN_ADCVOL_GAIN_LEFT 0x00000F00
+#define BP_AUDIOIN_ADCVOL_GAIN_LEFT 8
+#define BM_AUDIOIN_ADCVOL_SELECT_LEFT 0x00003000
+#define BP_AUDIOIN_ADCVOL_SELECT_LEFT 12
+#define BM_AUDIOIN_ADCVOL_MUTE 0x01000000
+
+#define HW_AUDIOIN_MICLINE 0x60
+
+#define HW_AUDIOIN_ANACLKCTRL 0x70
+#define BM_AUDIOIN_ANACLKCTRL_CLKGATE 0x80000000
+
+#define HW_AUDIOIN_DATA 0x80
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h b/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h
new file mode 100644
index 0000000..ca1942b
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-audioout.h
@@ -0,0 +1,111 @@
+/*
+ * stmp37xx: AUDIOOUT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_AUDIOOUT_BASE (STMP3XXX_REGS_BASE + 0x48000)
+
+#define HW_AUDIOOUT_CTRL 0x0
+#define BM_AUDIOOUT_CTRL_RUN 0x00000001
+#define BP_AUDIOOUT_CTRL_RUN 0
+#define BM_AUDIOOUT_CTRL_FIFO_ERROR_IRQ_EN 0x00000002
+#define BM_AUDIOOUT_CTRL_FIFO_OVERFLOW_IRQ 0x00000004
+#define BM_AUDIOOUT_CTRL_FIFO_UNDERFLOW_IRQ 0x00000008
+#define BM_AUDIOOUT_CTRL_WORD_LENGTH 0x00000040
+#define BM_AUDIOOUT_CTRL_CLKGATE 0x40000000
+#define BM_AUDIOOUT_CTRL_SFTRST 0x80000000
+
+#define HW_AUDIOOUT_STAT 0x10
+
+#define HW_AUDIOOUT_DACSRR 0x20
+#define BM_AUDIOOUT_DACSRR_SRC_FRAC 0x00001FFF
+#define BP_AUDIOOUT_DACSRR_SRC_FRAC 0
+#define BM_AUDIOOUT_DACSRR_SRC_INT 0x001F0000
+#define BP_AUDIOOUT_DACSRR_SRC_INT 16
+#define BM_AUDIOOUT_DACSRR_SRC_HOLD 0x07000000
+#define BP_AUDIOOUT_DACSRR_SRC_HOLD 24
+#define BM_AUDIOOUT_DACSRR_BASEMULT 0x70000000
+#define BP_AUDIOOUT_DACSRR_BASEMULT 28
+
+#define HW_AUDIOOUT_DACVOLUME 0x30
+#define BM_AUDIOOUT_DACVOLUME_MUTE_RIGHT 0x00000100
+#define BM_AUDIOOUT_DACVOLUME_MUTE_LEFT 0x01000000
+#define BM_AUDIOOUT_DACVOLUME_EN_ZCD 0x02000000
+
+#define HW_AUDIOOUT_DACDEBUG 0x40
+
+#define HW_AUDIOOUT_HPVOL 0x50
+#define BM_AUDIOOUT_HPVOL_MUTE 0x01000000
+#define BM_AUDIOOUT_HPVOL_EN_MSTR_ZCD 0x02000000
+
+#define HW_AUDIOOUT_PWRDN 0x70
+#define BM_AUDIOOUT_PWRDN_HEADPHONE 0x00000001
+#define BP_AUDIOOUT_PWRDN_HEADPHONE 0
+#define BM_AUDIOOUT_PWRDN_CAPLESS 0x00000010
+#define BM_AUDIOOUT_PWRDN_ADC 0x00000100
+#define BM_AUDIOOUT_PWRDN_DAC 0x00001000
+#define BM_AUDIOOUT_PWRDN_RIGHT_ADC 0x00010000
+#define BM_AUDIOOUT_PWRDN_LINEOUT 0x01000000
+
+#define HW_AUDIOOUT_REFCTRL 0x80
+#define BM_AUDIOOUT_REFCTRL_VAG_VAL 0x000000F0
+#define BP_AUDIOOUT_REFCTRL_VAG_VAL 4
+#define BM_AUDIOOUT_REFCTRL_ADC_REFVAL 0x00000F00
+#define BP_AUDIOOUT_REFCTRL_ADC_REFVAL 8
+#define BM_AUDIOOUT_REFCTRL_ADJ_VAG 0x00001000
+#define BM_AUDIOOUT_REFCTRL_ADJ_ADC 0x00002000
+#define BM_AUDIOOUT_REFCTRL_BIAS_CTRL 0x00030000
+#define BP_AUDIOOUT_REFCTRL_BIAS_CTRL 16
+#define BM_AUDIOOUT_REFCTRL_LOW_PWR 0x00080000
+#define BM_AUDIOOUT_REFCTRL_VBG_ADJ 0x00700000
+#define BP_AUDIOOUT_REFCTRL_VBG_ADJ 20
+#define BM_AUDIOOUT_REFCTRL_XTAL_BGR_BIAS 0x01000000
+#define BM_AUDIOOUT_REFCTRL_RAISE_REF 0x02000000
+
+#define HW_AUDIOOUT_ANACTRL 0x90
+#define BM_AUDIOOUT_ANACTRL_HP_CLASSAB 0x00000010
+#define BM_AUDIOOUT_ANACTRL_HP_HOLD_GND 0x00000020
+
+#define HW_AUDIOOUT_TEST 0xA0
+#define BM_AUDIOOUT_TEST_HP_I1_ADJ 0x00C00000
+#define BP_AUDIOOUT_TEST_HP_I1_ADJ 22
+
+#define HW_AUDIOOUT_BISTCTRL 0xB0
+
+#define HW_AUDIOOUT_BISTSTAT0 0xC0
+
+#define HW_AUDIOOUT_BISTSTAT1 0xD0
+
+#define HW_AUDIOOUT_ANACLKCTRL 0xE0
+#define BM_AUDIOOUT_ANACLKCTRL_CLKGATE 0x80000000
+
+#define HW_AUDIOOUT_DATA 0xF0
+
+#define HW_AUDIOOUT_LINEOUTCTRL 0x100
+#define BM_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT 0x0000001F
+#define BP_AUDIOOUT_LINEOUTCTRL_VOL_RIGHT 0
+#define BM_AUDIOOUT_LINEOUTCTRL_VOL_LEFT 0x00001F00
+#define BP_AUDIOOUT_LINEOUTCTRL_VOL_LEFT 8
+#define BM_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP 0x00007000
+#define BP_AUDIOOUT_LINEOUTCTRL_CHARGE_CAP 12
+#define BM_AUDIOOUT_LINEOUTCTRL_VAG_CTRL 0x00F00000
+#define BP_AUDIOOUT_LINEOUTCTRL_VAG_CTRL 20
+#define BM_AUDIOOUT_LINEOUTCTRL_MUTE 0x01000000
+#define BM_AUDIOOUT_LINEOUTCTRL_EN_ZCD 0x02000000
+
+#define HW_AUDIOOUT_VERSION 0x200
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h
new file mode 100644
index 0000000..47f5c92
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-clkctrl.h
@@ -0,0 +1,72 @@
+/*
+ * stmp37xx: CLKCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _MACH_REGS_CLKCTRL
+#define _MACH_REGS_CLKCTRL
+
+#define REGS_CLKCTRL_BASE (STMP3XXX_REGS_BASE + 0x40000)
+
+#define HW_CLKCTRL_PLLCTRL0 0x0
+#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS 0x00040000
+
+#define HW_CLKCTRL_CPU 0x20
+#define BM_CLKCTRL_CPU_DIV_CPU 0x0000003F
+#define BP_CLKCTRL_CPU_DIV_CPU 0
+
+#define HW_CLKCTRL_HBUS 0x30
+#define BM_CLKCTRL_HBUS_DIV 0x0000001F
+#define BP_CLKCTRL_HBUS_DIV 0
+
+#define HW_CLKCTRL_XBUS 0x40
+
+#define HW_CLKCTRL_XTAL 0x50
+
+#define HW_CLKCTRL_PIX 0x60
+#define BM_CLKCTRL_PIX_DIV 0x00007FFF
+#define BP_CLKCTRL_PIX_DIV 0
+#define BM_CLKCTRL_PIX_CLKGATE 0x80000000
+
+#define HW_CLKCTRL_SSP 0x70
+
+#define HW_CLKCTRL_GPMI 0x80
+
+#define HW_CLKCTRL_SPDIF 0x90
+
+#define HW_CLKCTRL_EMI 0xA0
+
+#define HW_CLKCTRL_IR 0xB0
+
+#define HW_CLKCTRL_SAIF 0xC0
+
+#define HW_CLKCTRL_FRAC 0xD0
+#define BM_CLKCTRL_FRAC_EMIFRAC 0x00003F00
+#define BP_CLKCTRL_FRAC_EMIFRAC 8
+#define BM_CLKCTRL_FRAC_PIXFRAC 0x003F0000
+#define BP_CLKCTRL_FRAC_PIXFRAC 16
+#define BM_CLKCTRL_FRAC_CLKGATEPIX 0x00800000
+
+#define HW_CLKCTRL_CLKSEQ 0xE0
+#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX 0x00000002
+
+#define HW_CLKCTRL_RESET 0xF0
+#define BM_CLKCTRL_RESET_DIG 0x00000001
+#define BP_CLKCTRL_RESET_DIG 0
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h b/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h
new file mode 100644
index 0000000..ba1bbe2
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-digctl.h
@@ -0,0 +1,24 @@
+/*
+ * stmp37xx: DIGCTL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_DIGCTL_BASE (STMP3XXX_REGS_BASE + 0x1C000)
+
+#define HW_DIGCTL_CTRL 0x0
+#define BM_DIGCTL_CTRL_USB_CLKGATE 0x00000004
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h b/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h
new file mode 100644
index 0000000..3b6d990
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-ecc8.h
@@ -0,0 +1,37 @@
+/*
+ * stmp37xx: ECC8 register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_ECC8_BASE (STMP3XXX_REGS_BASE + 0x8000)
+
+#define HW_ECC8_CTRL 0x0
+#define BM_ECC8_CTRL_COMPLETE_IRQ 0x00000001
+#define BP_ECC8_CTRL_COMPLETE_IRQ 0
+#define BM_ECC8_CTRL_COMPLETE_IRQ_EN 0x00000100
+#define BM_ECC8_CTRL_AHBM_SFTRST 0x20000000
+
+#define HW_ECC8_STATUS0 0x10
+#define BM_ECC8_STATUS0_UNCORRECTABLE 0x00000004
+#define BM_ECC8_STATUS0_CORRECTED 0x00000008
+#define BM_ECC8_STATUS0_STATUS_AUX 0x00000F00
+#define BP_ECC8_STATUS0_STATUS_AUX 8
+#define BM_ECC8_STATUS0_COMPLETED_CE 0x000F0000
+#define BP_ECC8_STATUS0_COMPLETED_CE 16
+
+#define HW_ECC8_STATUS1 0x20
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h b/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h
new file mode 100644
index 0000000..f2b304f
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-gpmi.h
@@ -0,0 +1,63 @@
+/*
+ * stmp37xx: GPMI register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_GPMI_BASE (STMP3XXX_REGS_BASE + 0xC000)
+#define REGS_GPMI_PHYS 0x8000C000
+#define REGS_GPMI_SIZE 0x2000
+
+#define HW_GPMI_CTRL0 0x0
+#define BM_GPMI_CTRL0_XFER_COUNT 0x0000FFFF
+#define BP_GPMI_CTRL0_XFER_COUNT 0
+#define BM_GPMI_CTRL0_CS 0x00300000
+#define BP_GPMI_CTRL0_CS 20
+#define BM_GPMI_CTRL0_LOCK_CS 0x00400000
+#define BM_GPMI_CTRL0_WORD_LENGTH 0x00800000
+#define BM_GPMI_CTRL0_COMMAND_MODE 0x03000000
+#define BP_GPMI_CTRL0_COMMAND_MODE 24
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3
+#define BM_GPMI_CTRL0_RUN 0x20000000
+#define BM_GPMI_CTRL0_CLKGATE 0x40000000
+#define BM_GPMI_CTRL0_SFTRST 0x80000000
+#define BM_GPMI_ECCCTRL_ENABLE_ECC 0x00001000
+#define BM_GPMI_ECCCTRL_ECC_CMD 0x00006000
+#define BP_GPMI_ECCCTRL_ECC_CMD 13
+
+#define HW_GPMI_CTRL1 0x60
+#define BM_GPMI_CTRL1_GPMI_MODE 0x00000003
+#define BP_GPMI_CTRL1_GPMI_MODE 0
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY 0x00000004
+#define BM_GPMI_CTRL1_DEV_RESET 0x00000008
+#define BM_GPMI_CTRL1_TIMEOUT_IRQ 0x00000200
+#define BM_GPMI_CTRL1_DEV_IRQ 0x00000400
+#define BM_GPMI_CTRL1_DSAMPLE_TIME 0x00007000
+#define BP_GPMI_CTRL1_DSAMPLE_TIME 12
+
+#define HW_GPMI_TIMING0 0x70
+#define BM_GPMI_TIMING0_DATA_SETUP 0x000000FF
+#define BP_GPMI_TIMING0_DATA_SETUP 0
+#define BM_GPMI_TIMING0_DATA_HOLD 0x0000FF00
+#define BP_GPMI_TIMING0_DATA_HOLD 8
+
+#define HW_GPMI_TIMING1 0x80
+#define BM_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 0xFFFF0000
+#define BP_GPMI_TIMING1_DEVICE_BUSY_TIMEOUT 16
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h b/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h
new file mode 100644
index 0000000..35882a9
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-i2c.h
@@ -0,0 +1,55 @@
+/*
+ * stmp37xx: I2C register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_I2C_BASE (STMP3XXX_REGS_BASE + 0x58000)
+#define REGS_I2C_PHYS 0x80058000
+#define REGS_I2C_SIZE 0x2000
+
+#define HW_I2C_CTRL0 0x0
+#define BM_I2C_CTRL0_XFER_COUNT 0x0000FFFF
+#define BP_I2C_CTRL0_XFER_COUNT 0
+#define BM_I2C_CTRL0_DIRECTION 0x00010000
+#define BM_I2C_CTRL0_MASTER_MODE 0x00020000
+#define BM_I2C_CTRL0_PRE_SEND_START 0x00080000
+#define BM_I2C_CTRL0_POST_SEND_STOP 0x00100000
+#define BM_I2C_CTRL0_RETAIN_CLOCK 0x00200000
+#define BM_I2C_CTRL0_SEND_NAK_ON_LAST 0x02000000
+#define BM_I2C_CTRL0_CLKGATE 0x40000000
+#define BM_I2C_CTRL0_SFTRST 0x80000000
+
+#define HW_I2C_TIMING0 0x10
+
+#define HW_I2C_TIMING1 0x20
+
+#define HW_I2C_TIMING2 0x30
+
+#define HW_I2C_CTRL1 0x40
+#define BM_I2C_CTRL1_SLAVE_IRQ 0x00000001
+#define BP_I2C_CTRL1_SLAVE_IRQ 0
+#define BM_I2C_CTRL1_SLAVE_STOP_IRQ 0x00000002
+#define BM_I2C_CTRL1_MASTER_LOSS_IRQ 0x00000004
+#define BM_I2C_CTRL1_EARLY_TERM_IRQ 0x00000008
+#define BM_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ 0x00000010
+#define BM_I2C_CTRL1_NO_SLAVE_ACK_IRQ 0x00000020
+#define BM_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ 0x00000040
+#define BM_I2C_CTRL1_BUS_FREE_IRQ 0x00000080
+#define BM_I2C_CTRL1_CLR_GOT_A_NAK 0x10000000
+
+#define HW_I2C_VERSION 0x90
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h
new file mode 100644
index 0000000..3b7c922
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-icoll.h
@@ -0,0 +1,43 @@
+/*
+ * stmp37xx: ICOLL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _MACH_REGS_ICOLL
+#define _MACH_REGS_ICOLL
+
+#define REGS_ICOLL_BASE (STMP3XXX_REGS_BASE + 0x0)
+
+#define HW_ICOLL_VECTOR 0x0
+
+#define HW_ICOLL_LEVELACK 0x10
+
+#define HW_ICOLL_CTRL 0x20
+#define BM_ICOLL_CTRL_CLKGATE 0x40000000
+#define BM_ICOLL_CTRL_SFTRST 0x80000000
+
+#define HW_ICOLL_STAT 0x30
+
+#define HW_ICOLL_PRIORITY0 (0x60 + 0 * 0x10)
+#define HW_ICOLL_PRIORITY1 (0x60 + 1 * 0x10)
+#define HW_ICOLL_PRIORITY2 (0x60 + 2 * 0x10)
+#define HW_ICOLL_PRIORITY3 (0x60 + 3 * 0x10)
+
+#define HW_ICOLL_PRIORITYn 0x60
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h b/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h
new file mode 100644
index 0000000..72514e8
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-lcdif.h
@@ -0,0 +1,89 @@
+/*
+ * stmp37xx: LCDIF register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_LCDIF_BASE (STMP3XXX_REGS_BASE + 0x30000)
+#define REGS_LCDIF_PHYS 0x80030000
+#define REGS_LCDIF_SIZE 0x2000
+
+#define HW_LCDIF_CTRL 0x0
+#define BM_LCDIF_CTRL_COUNT 0x0000FFFF
+#define BP_LCDIF_CTRL_COUNT 0
+#define BM_LCDIF_CTRL_RUN 0x00010000
+#define BM_LCDIF_CTRL_WORD_LENGTH 0x00020000
+#define BM_LCDIF_CTRL_DATA_SELECT 0x00040000
+#define BM_LCDIF_CTRL_DOTCLK_MODE 0x00080000
+#define BM_LCDIF_CTRL_VSYNC_MODE 0x00100000
+#define BM_LCDIF_CTRL_DATA_SWIZZLE 0x00600000
+#define BP_LCDIF_CTRL_DATA_SWIZZLE 21
+#define BM_LCDIF_CTRL_BYPASS_COUNT 0x00800000
+#define BM_LCDIF_CTRL_SHIFT_NUM_BITS 0x06000000
+#define BP_LCDIF_CTRL_SHIFT_NUM_BITS 25
+#define BM_LCDIF_CTRL_DATA_SHIFT_DIR 0x08000000
+#define BM_LCDIF_CTRL_WAIT_FOR_VSYNC_EDGE 0x10000000
+#define BM_LCDIF_CTRL_CLKGATE 0x40000000
+#define BM_LCDIF_CTRL_SFTRST 0x80000000
+
+#define HW_LCDIF_CTRL1 0x10
+#define BM_LCDIF_CTRL1_RESET 0x00000001
+#define BP_LCDIF_CTRL1_RESET 0
+#define BM_LCDIF_CTRL1_MODE86 0x00000002
+#define BM_LCDIF_CTRL1_BUSY_ENABLE 0x00000004
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ 0x00000100
+#define BM_LCDIF_CTRL1_CUR_FRAME_DONE_IRQ 0x00000200
+#define BM_LCDIF_CTRL1_UNDERFLOW_IRQ 0x00000400
+#define BM_LCDIF_CTRL1_OVERFLOW_IRQ 0x00000800
+#define BM_LCDIF_CTRL1_VSYNC_EDGE_IRQ_EN 0x00001000
+#define BM_LCDIF_CTRL1_BYTE_PACKING_FORMAT 0x000F0000
+#define BP_LCDIF_CTRL1_BYTE_PACKING_FORMAT 16
+
+#define HW_LCDIF_TIMING 0x20
+
+#define HW_LCDIF_VDCTRL0 0x30
+#define BM_LCDIF_VDCTRL0_VALID_DATA_CNT 0x000003FF
+#define BP_LCDIF_VDCTRL0_VALID_DATA_CNT 0
+#define BM_LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT 0x00100000
+#define BM_LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT 0x00200000
+#define BM_LCDIF_VDCTRL0_ENABLE_POL 0x01000000
+#define BM_LCDIF_VDCTRL0_DOTCLK_POL 0x02000000
+#define BM_LCDIF_VDCTRL0_HSYNC_POL 0x04000000
+#define BM_LCDIF_VDCTRL0_VSYNC_POL 0x08000000
+#define BM_LCDIF_VDCTRL0_ENABLE_PRESENT 0x10000000
+#define BM_LCDIF_VDCTRL0_VSYNC_OEB 0x20000000
+
+#define HW_LCDIF_VDCTRL1 0x40
+#define BM_LCDIF_VDCTRL1_VSYNC_PERIOD 0x000FFFFF
+#define BP_LCDIF_VDCTRL1_VSYNC_PERIOD 0
+#define BM_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH 0xFFF00000
+#define BP_LCDIF_VDCTRL1_VSYNC_PULSE_WIDTH 20
+
+#define HW_LCDIF_VDCTRL2 0x50
+#define BM_LCDIF_VDCTRL2_VALID_DATA_CNT 0x000007FF
+#define BP_LCDIF_VDCTRL2_VALID_DATA_CNT 0
+#define BM_LCDIF_VDCTRL2_HSYNC_PERIOD 0x007FF800
+#define BP_LCDIF_VDCTRL2_HSYNC_PERIOD 11
+#define BM_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 0xFF800000
+#define BP_LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH 23
+
+#define HW_LCDIF_VDCTRL3 0x60
+#define BM_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0x000001FF
+#define BP_LCDIF_VDCTRL3_VERTICAL_WAIT_CNT 0
+#define BM_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 0x00FFF000
+#define BP_LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT 12
+#define BM_LCDIF_VDCTRL3_SYNC_SIGNALS_ON 0x01000000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h b/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h
new file mode 100644
index 0000000..cc7b470
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-lradc.h
@@ -0,0 +1,97 @@
+/*
+ * stmp37xx: LRADC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_LRADC_BASE (STMP3XXX_REGS_BASE + 0x50000)
+
+#define HW_LRADC_CTRL0 0x0
+#define BM_LRADC_CTRL0_SCHEDULE 0x000000FF
+#define BP_LRADC_CTRL0_SCHEDULE 0
+#define BM_LRADC_CTRL0_XPLUS_ENABLE 0x00010000
+#define BM_LRADC_CTRL0_YPLUS_ENABLE 0x00020000
+#define BM_LRADC_CTRL0_XMINUS_ENABLE 0x00040000
+#define BM_LRADC_CTRL0_YMINUS_ENABLE 0x00080000
+#define BM_LRADC_CTRL0_TOUCH_DETECT_ENABLE 0x00100000
+#define BM_LRADC_CTRL0_ONCHIP_GROUNDREF 0x00200000
+#define BM_LRADC_CTRL0_CLKGATE 0x40000000
+#define BM_LRADC_CTRL0_SFTRST 0x80000000
+
+#define HW_LRADC_CTRL1 0x10
+#define BM_LRADC_CTRL1_LRADC0_IRQ 0x00000001
+#define BP_LRADC_CTRL1_LRADC0_IRQ 0
+#define BM_LRADC_CTRL1_LRADC5_IRQ 0x00000020
+#define BM_LRADC_CTRL1_LRADC6_IRQ 0x00000040
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ 0x00000100
+#define BM_LRADC_CTRL1_LRADC0_IRQ_EN 0x00010000
+#define BM_LRADC_CTRL1_LRADC5_IRQ_EN 0x00200000
+#define BM_LRADC_CTRL1_TOUCH_DETECT_IRQ_EN 0x01000000
+
+#define HW_LRADC_CTRL2 0x20
+#define BM_LRADC_CTRL2_BL_BRIGHTNESS 0x001F0000
+#define BP_LRADC_CTRL2_BL_BRIGHTNESS 16
+#define BM_LRADC_CTRL2_BL_MUX_SELECT 0x00200000
+#define BM_LRADC_CTRL2_BL_ENABLE 0x00400000
+#define BM_LRADC_CTRL2_DIVIDE_BY_TWO 0xFF000000
+#define BP_LRADC_CTRL2_DIVIDE_BY_TWO 24
+
+#define HW_LRADC_CTRL3 0x30
+#define BM_LRADC_CTRL3_CYCLE_TIME 0x00000300
+#define BP_LRADC_CTRL3_CYCLE_TIME 8
+
+#define HW_LRADC_STATUS 0x40
+#define BM_LRADC_STATUS_TOUCH_DETECT_RAW 0x00000001
+#define BP_LRADC_STATUS_TOUCH_DETECT_RAW 0
+
+#define HW_LRADC_CH0 (0x50 + 0 * 0x10)
+#define HW_LRADC_CH1 (0x50 + 1 * 0x10)
+#define HW_LRADC_CH2 (0x50 + 2 * 0x10)
+#define HW_LRADC_CH3 (0x50 + 3 * 0x10)
+#define HW_LRADC_CH4 (0x50 + 4 * 0x10)
+#define HW_LRADC_CH5 (0x50 + 5 * 0x10)
+#define HW_LRADC_CH6 (0x50 + 6 * 0x10)
+#define HW_LRADC_CH7 (0x50 + 7 * 0x10)
+
+#define HW_LRADC_CHn 0x50
+#define BM_LRADC_CHn_VALUE 0x0003FFFF
+#define BP_LRADC_CHn_VALUE 0
+#define BM_LRADC_CHn_NUM_SAMPLES 0x1F000000
+#define BP_LRADC_CHn_NUM_SAMPLES 24
+#define BM_LRADC_CHn_ACCUMULATE 0x20000000
+
+#define HW_LRADC_DELAY0 (0xD0 + 0 * 0x10)
+#define HW_LRADC_DELAY1 (0xD0 + 1 * 0x10)
+#define HW_LRADC_DELAY2 (0xD0 + 2 * 0x10)
+#define HW_LRADC_DELAY3 (0xD0 + 3 * 0x10)
+
+#define HW_LRADC_DELAYn 0xD0
+#define BM_LRADC_DELAYn_DELAY 0x000007FF
+#define BP_LRADC_DELAYn_DELAY 0
+#define BM_LRADC_DELAYn_LOOP_COUNT 0x0000F800
+#define BP_LRADC_DELAYn_LOOP_COUNT 11
+#define BM_LRADC_DELAYn_TRIGGER_DELAYS 0x000F0000
+#define BP_LRADC_DELAYn_TRIGGER_DELAYS 16
+#define BM_LRADC_DELAYn_KICK 0x00100000
+#define BM_LRADC_DELAYn_TRIGGER_LRADCS 0xFF000000
+#define BP_LRADC_DELAYn_TRIGGER_LRADCS 24
+
+#define HW_LRADC_CTRL4 0x140
+#define BM_LRADC_CTRL4_LRADC6SELECT 0x0F000000
+#define BP_LRADC_CTRL4_LRADC6SELECT 24
+#define BM_LRADC_CTRL4_LRADC7SELECT 0xF0000000
+#define BP_LRADC_CTRL4_LRADC7SELECT 28
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h
new file mode 100644
index 0000000..d5efce2
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-pinctrl.h
@@ -0,0 +1,88 @@
+/*
+ * stmp37xx: PINCTRL register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _MACH_REGS_PINCTRL
+#define _MACH_REGS_PINCTRL
+
+#define REGS_PINCTRL_BASE (STMP3XXX_REGS_BASE + 0x18000)
+
+#define HW_PINCTRL_MUXSEL0 0x100
+#define HW_PINCTRL_MUXSEL1 0x110
+#define HW_PINCTRL_MUXSEL2 0x120
+#define HW_PINCTRL_MUXSEL3 0x130
+#define HW_PINCTRL_MUXSEL4 0x140
+#define HW_PINCTRL_MUXSEL5 0x150
+#define HW_PINCTRL_MUXSEL6 0x160
+#define HW_PINCTRL_MUXSEL7 0x170
+
+#define HW_PINCTRL_DRIVE0 0x200
+#define HW_PINCTRL_DRIVE1 0x210
+#define HW_PINCTRL_DRIVE2 0x220
+#define HW_PINCTRL_DRIVE3 0x230
+#define HW_PINCTRL_DRIVE4 0x240
+#define HW_PINCTRL_DRIVE5 0x250
+#define HW_PINCTRL_DRIVE6 0x260
+#define HW_PINCTRL_DRIVE7 0x270
+#define HW_PINCTRL_DRIVE8 0x280
+#define HW_PINCTRL_DRIVE9 0x290
+#define HW_PINCTRL_DRIVE10 0x2A0
+#define HW_PINCTRL_DRIVE11 0x2B0
+#define HW_PINCTRL_DRIVE12 0x2C0
+#define HW_PINCTRL_DRIVE13 0x2D0
+#define HW_PINCTRL_DRIVE14 0x2E0
+
+#define HW_PINCTRL_PULL0 0x300
+#define HW_PINCTRL_PULL1 0x310
+#define HW_PINCTRL_PULL2 0x320
+#define HW_PINCTRL_PULL3 0x330
+
+#define HW_PINCTRL_DOUT0 0x400
+#define HW_PINCTRL_DOUT1 0x410
+#define HW_PINCTRL_DOUT2 0x420
+
+#define HW_PINCTRL_DIN0 0x500
+#define HW_PINCTRL_DIN1 0x510
+#define HW_PINCTRL_DIN2 0x520
+
+#define HW_PINCTRL_DOE0 0x600
+#define HW_PINCTRL_DOE1 0x610
+#define HW_PINCTRL_DOE2 0x620
+
+#define HW_PINCTRL_PIN2IRQ0 0x700
+#define HW_PINCTRL_PIN2IRQ1 0x710
+#define HW_PINCTRL_PIN2IRQ2 0x720
+
+#define HW_PINCTRL_IRQEN0 0x800
+#define HW_PINCTRL_IRQEN1 0x810
+#define HW_PINCTRL_IRQEN2 0x820
+
+#define HW_PINCTRL_IRQLEVEL0 0x900
+#define HW_PINCTRL_IRQLEVEL1 0x910
+#define HW_PINCTRL_IRQLEVEL2 0x920
+
+#define HW_PINCTRL_IRQPOL0 0xA00
+#define HW_PINCTRL_IRQPOL1 0xA10
+#define HW_PINCTRL_IRQPOL2 0xA20
+
+#define HW_PINCTRL_IRQSTAT0 0xB00
+#define HW_PINCTRL_IRQSTAT1 0xB10
+#define HW_PINCTRL_IRQSTAT2 0xB20
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-power.h b/arch/arm/mach-stmp37xx/include/mach/regs-power.h
new file mode 100644
index 0000000..0e733d7
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-power.h
@@ -0,0 +1,56 @@
+/*
+ * stmp37xx: POWER register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _MACH_REGS_POWER
+#define _MACH_REGS_POWER
+
+#define REGS_POWER_BASE (STMP3XXX_REGS_BASE + 0x44000)
+
+#define HW_POWER_CTRL 0x0
+#define BM_POWER_CTRL_CLKGATE 0x40000000
+
+#define HW_POWER_5VCTRL 0x10
+
+#define HW_POWER_MINPWR 0x20
+
+#define HW_POWER_CHARGE 0x30
+
+#define HW_POWER_VDDDCTRL 0x40
+
+#define HW_POWER_VDDACTRL 0x50
+
+#define HW_POWER_VDDIOCTRL 0x60
+#define BM_POWER_VDDIOCTRL_TRG 0x0000001F
+#define BP_POWER_VDDIOCTRL_TRG 0
+
+#define HW_POWER_STS 0xB0
+#define BM_POWER_STS_VBUSVALID 0x00000002
+#define BM_POWER_STS_BVALID 0x00000004
+#define BM_POWER_STS_AVALID 0x00000008
+#define BM_POWER_STS_DC_OK 0x00000100
+
+#define HW_POWER_RESET 0xE0
+
+#define HW_POWER_DEBUG 0xF0
+#define BM_POWER_DEBUG_BVALIDPIOLOCK 0x00000002
+#define BM_POWER_DEBUG_AVALIDPIOLOCK 0x00000004
+#define BM_POWER_DEBUG_VBUSVALIDPIOLOCK 0x00000008
+
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h b/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h
new file mode 100644
index 0000000..15966a1
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-pwm.h
@@ -0,0 +1,51 @@
+/*
+ * stmp37xx: PWM register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_PWM_BASE (STMP3XXX_REGS_BASE + 0x64000)
+
+#define HW_PWM_CTRL 0x0
+#define BM_PWM_CTRL_PWM2_ENABLE 0x00000004
+#define BM_PWM_CTRL_PWM2_ANA_CTRL_ENABLE 0x00000020
+
+#define HW_PWM_ACTIVE0 (0x10 + 0 * 0x20)
+#define HW_PWM_ACTIVE1 (0x10 + 1 * 0x20)
+#define HW_PWM_ACTIVE2 (0x10 + 2 * 0x20)
+#define HW_PWM_ACTIVE3 (0x10 + 3 * 0x20)
+
+#define HW_PWM_ACTIVEn 0x10
+#define BM_PWM_ACTIVEn_ACTIVE 0x0000FFFF
+#define BP_PWM_ACTIVEn_ACTIVE 0
+#define BM_PWM_ACTIVEn_INACTIVE 0xFFFF0000
+#define BP_PWM_ACTIVEn_INACTIVE 16
+
+#define HW_PWM_PERIOD0 (0x20 + 0 * 0x20)
+#define HW_PWM_PERIOD1 (0x20 + 1 * 0x20)
+#define HW_PWM_PERIOD2 (0x20 + 2 * 0x20)
+#define HW_PWM_PERIOD3 (0x20 + 3 * 0x20)
+
+#define HW_PWM_PERIODn 0x20
+#define BM_PWM_PERIODn_PERIOD 0x0000FFFF
+#define BP_PWM_PERIODn_PERIOD 0
+#define BM_PWM_PERIODn_ACTIVE_STATE 0x00030000
+#define BP_PWM_PERIODn_ACTIVE_STATE 16
+#define BM_PWM_PERIODn_INACTIVE_STATE 0x000C0000
+#define BP_PWM_PERIODn_INACTIVE_STATE 18
+#define BM_PWM_PERIODn_CDIV 0x00700000
+#define BP_PWM_PERIODn_CDIV 20
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h b/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h
new file mode 100644
index 0000000..fac40ed
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-rtc.h
@@ -0,0 +1,57 @@
+/*
+ * stmp37xx: RTC register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_RTC_BASE (STMP3XXX_REGS_BASE + 0x5C000)
+#define REGS_RTC_PHYS 0x8005C000
+#define REGS_RTC_SIZE 0x2000
+
+#define HW_RTC_CTRL 0x0
+#define BM_RTC_CTRL_ALARM_IRQ_EN 0x00000001
+#define BP_RTC_CTRL_ALARM_IRQ_EN 0
+#define BM_RTC_CTRL_ONEMSEC_IRQ_EN 0x00000002
+#define BM_RTC_CTRL_ALARM_IRQ 0x00000004
+#define BM_RTC_CTRL_ONEMSEC_IRQ 0x00000008
+#define BM_RTC_CTRL_WATCHDOGEN 0x00000010
+
+#define HW_RTC_STAT 0x10
+#define BM_RTC_STAT_NEW_REGS 0x0000FF00
+#define BP_RTC_STAT_NEW_REGS 8
+#define BM_RTC_STAT_STALE_REGS 0x00FF0000
+#define BP_RTC_STAT_STALE_REGS 16
+#define BM_RTC_STAT_RTC_PRESENT 0x80000000
+
+#define HW_RTC_SECONDS 0x30
+
+#define HW_RTC_ALARM 0x40
+
+#define HW_RTC_WATCHDOG 0x50
+
+#define HW_RTC_PERSISTENT0 0x60
+#define BM_RTC_PERSISTENT0_ALARM_WAKE_EN 0x00000002
+#define BM_RTC_PERSISTENT0_ALARM_EN 0x00000004
+#define BM_RTC_PERSISTENT0_XTAL24MHZ_PWRUP 0x00000010
+#define BM_RTC_PERSISTENT0_XTAL32KHZ_PWRUP 0x00000020
+#define BM_RTC_PERSISTENT0_ALARM_WAKE 0x00000080
+#define BM_RTC_PERSISTENT0_SPARE_ANALOG 0xFFFC0000
+#define BP_RTC_PERSISTENT0_SPARE_ANALOG 18
+
+#define HW_RTC_PERSISTENT1 0x70
+
+#define HW_RTC_VERSION 0xD0
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h b/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h
new file mode 100644
index 0000000..cbde891
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-ssp.h
@@ -0,0 +1,101 @@
+/*
+ * stmp37xx: SSP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_SSP_BASE (STMP3XXX_REGS_BASE + 0x10000)
+#define REGS_SSP1_PHYS 0x80010000
+#define REGS_SSP2_PHYS 0x80034000
+#define REGS_SSP_SIZE 0x2000
+
+#define HW_SSP_CTRL0 0x0
+#define BM_SSP_CTRL0_XFER_COUNT 0x0000FFFF
+#define BP_SSP_CTRL0_XFER_COUNT 0
+#define BM_SSP_CTRL0_ENABLE 0x00010000
+#define BM_SSP_CTRL0_GET_RESP 0x00020000
+#define BM_SSP_CTRL0_LONG_RESP 0x00080000
+#define BM_SSP_CTRL0_WAIT_FOR_CMD 0x00100000
+#define BM_SSP_CTRL0_WAIT_FOR_IRQ 0x00200000
+#define BM_SSP_CTRL0_BUS_WIDTH 0x00C00000
+#define BP_SSP_CTRL0_BUS_WIDTH 22
+#define BM_SSP_CTRL0_DATA_XFER 0x01000000
+#define BM_SSP_CTRL0_READ 0x02000000
+#define BM_SSP_CTRL0_IGNORE_CRC 0x04000000
+#define BM_SSP_CTRL0_LOCK_CS 0x08000000
+#define BM_SSP_CTRL0_RUN 0x20000000
+#define BM_SSP_CTRL0_CLKGATE 0x40000000
+#define BM_SSP_CTRL0_SFTRST 0x80000000
+
+#define HW_SSP_CMD0 0x10
+#define BM_SSP_CMD0_CMD 0x000000FF
+#define BP_SSP_CMD0_CMD 0
+#define BM_SSP_CMD0_BLOCK_COUNT 0x0000FF00
+#define BP_SSP_CMD0_BLOCK_COUNT 8
+#define BM_SSP_CMD0_BLOCK_SIZE 0x000F0000
+#define BP_SSP_CMD0_BLOCK_SIZE 16
+#define BM_SSP_CMD0_APPEND_8CYC 0x00100000
+#define BM_SSP_CMD1_CMD_ARG 0xFFFFFFFF
+#define BP_SSP_CMD1_CMD_ARG 0
+
+#define HW_SSP_TIMING 0x50
+#define BM_SSP_TIMING_CLOCK_RATE 0x000000FF
+#define BP_SSP_TIMING_CLOCK_RATE 0
+#define BM_SSP_TIMING_CLOCK_DIVIDE 0x0000FF00
+#define BP_SSP_TIMING_CLOCK_DIVIDE 8
+#define BM_SSP_TIMING_TIMEOUT 0xFFFF0000
+#define BP_SSP_TIMING_TIMEOUT 16
+
+#define HW_SSP_CTRL1 0x60
+#define BM_SSP_CTRL1_SSP_MODE 0x0000000F
+#define BP_SSP_CTRL1_SSP_MODE 0
+#define BM_SSP_CTRL1_WORD_LENGTH 0x000000F0
+#define BP_SSP_CTRL1_WORD_LENGTH 4
+#define BM_SSP_CTRL1_POLARITY 0x00000200
+#define BM_SSP_CTRL1_PHASE 0x00000400
+#define BM_SSP_CTRL1_DMA_ENABLE 0x00002000
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ 0x00008000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN 0x00010000
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ 0x00020000
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ 0x00200000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN 0x00400000
+#define BM_SSP_CTRL1_DATA_CRC_IRQ 0x00800000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN 0x01000000
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ 0x02000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN 0x04000000
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ 0x08000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN 0x10000000
+#define BM_SSP_CTRL1_RESP_ERR_IRQ 0x20000000
+#define BM_SSP_CTRL1_SDIO_IRQ 0x80000000
+
+#define HW_SSP_DATA 0x70
+
+#define HW_SSP_SDRESP0 0x80
+
+#define HW_SSP_SDRESP1 0x90
+
+#define HW_SSP_SDRESP2 0xA0
+
+#define HW_SSP_SDRESP3 0xB0
+
+#define HW_SSP_STATUS 0xC0
+#define BM_SSP_STATUS_FIFO_EMPTY 0x00000020
+#define BM_SSP_STATUS_TIMEOUT 0x00001000
+#define BM_SSP_STATUS_RESP_TIMEOUT 0x00004000
+#define BM_SSP_STATUS_RESP_ERR 0x00008000
+#define BM_SSP_STATUS_RESP_CRC_ERR 0x00010000
+#define BM_SSP_STATUS_CARD_DETECT 0x10000000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h
new file mode 100644
index 0000000..4af0f6e
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-timrot.h
@@ -0,0 +1,49 @@
+/*
+ * stmp37xx: TIMROT register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _MACH_REGS_TIMROT
+#define _MACH_REGS_TIMROT
+
+#define REGS_TIMROT_BASE (STMP3XXX_REGS_BASE + 0x68000)
+
+#define HW_TIMROT_ROTCTRL 0x0
+#define BM_TIMROT_ROTCTRL_CLKGATE 0x40000000
+#define BM_TIMROT_ROTCTRL_SFTRST 0x80000000
+
+#define HW_TIMROT_TIMCTRL0 (0x20 + 0 * 0x20)
+#define HW_TIMROT_TIMCTRL1 (0x20 + 1 * 0x20)
+#define HW_TIMROT_TIMCTRL2 (0x20 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCTRLn 0x20
+#define BM_TIMROT_TIMCTRLn_SELECT 0x0000000F
+#define BP_TIMROT_TIMCTRLn_SELECT 0
+#define BM_TIMROT_TIMCTRLn_PRESCALE 0x00000030
+#define BP_TIMROT_TIMCTRLn_PRESCALE 4
+#define BM_TIMROT_TIMCTRLn_RELOAD 0x00000040
+#define BM_TIMROT_TIMCTRLn_UPDATE 0x00000080
+#define BM_TIMROT_TIMCTRLn_IRQ_EN 0x00004000
+#define BM_TIMROT_TIMCTRLn_IRQ 0x00008000
+
+#define HW_TIMROT_TIMCOUNT0 (0x30 + 0 * 0x20)
+#define HW_TIMROT_TIMCOUNT1 (0x30 + 1 * 0x20)
+#define HW_TIMROT_TIMCOUNT2 (0x30 + 2 * 0x20)
+
+#define HW_TIMROT_TIMCOUNTn 0x30
+#endif
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h b/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h
new file mode 100644
index 0000000..0594275
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-uartapp.h
@@ -0,0 +1,85 @@
+/*
+ * stmp37xx: UARTAPP register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_UARTAPP_BASE (STMP3XXX_REGS_BASE + 0x6C000)
+#define REGS_UARTAPP1_PHYS 0x8006C000
+#define REGS_UARTAPP_SIZE 0x2000
+
+#define HW_UARTAPP_CTRL0 0x0
+#define BM_UARTAPP_CTRL0_XFER_COUNT 0x0000FFFF
+#define BP_UARTAPP_CTRL0_XFER_COUNT 0
+#define BM_UARTAPP_CTRL0_RXTIMEOUT 0x07FF0000
+#define BP_UARTAPP_CTRL0_RXTIMEOUT 16
+#define BM_UARTAPP_CTRL0_RXTO_ENABLE 0x08000000
+#define BM_UARTAPP_CTRL0_RUN 0x20000000
+#define BM_UARTAPP_CTRL0_SFTRST 0x80000000
+#define BM_UARTAPP_CTRL1_XFER_COUNT 0x0000FFFF
+#define BP_UARTAPP_CTRL1_XFER_COUNT 0
+#define BM_UARTAPP_CTRL1_RUN 0x10000000
+
+#define HW_UARTAPP_CTRL2 0x20
+#define BM_UARTAPP_CTRL2_UARTEN 0x00000001
+#define BP_UARTAPP_CTRL2_UARTEN 0
+#define BM_UARTAPP_CTRL2_TXE 0x00000100
+#define BM_UARTAPP_CTRL2_RXE 0x00000200
+#define BM_UARTAPP_CTRL2_RTS 0x00000800
+#define BM_UARTAPP_CTRL2_RTSEN 0x00004000
+#define BM_UARTAPP_CTRL2_CTSEN 0x00008000
+#define BM_UARTAPP_CTRL2_RXDMAE 0x01000000
+#define BM_UARTAPP_CTRL2_TXDMAE 0x02000000
+#define BM_UARTAPP_CTRL2_DMAONERR 0x04000000
+
+#define HW_UARTAPP_LINECTRL 0x30
+#define BM_UARTAPP_LINECTRL_BRK 0x00000001
+#define BP_UARTAPP_LINECTRL_BRK 0
+#define BM_UARTAPP_LINECTRL_PEN 0x00000002
+#define BM_UARTAPP_LINECTRL_EPS 0x00000004
+#define BM_UARTAPP_LINECTRL_STP2 0x00000008
+#define BM_UARTAPP_LINECTRL_FEN 0x00000010
+#define BM_UARTAPP_LINECTRL_WLEN 0x00000060
+#define BP_UARTAPP_LINECTRL_WLEN 5
+#define BM_UARTAPP_LINECTRL_SPS 0x00000080
+#define BM_UARTAPP_LINECTRL_BAUD_DIVFRAC 0x00003F00
+#define BP_UARTAPP_LINECTRL_BAUD_DIVFRAC 8
+#define BM_UARTAPP_LINECTRL_BAUD_DIVINT 0xFFFF0000
+#define BP_UARTAPP_LINECTRL_BAUD_DIVINT 16
+
+#define HW_UARTAPP_INTR 0x50
+#define BM_UARTAPP_INTR_CTSMIS 0x00000002
+#define BM_UARTAPP_INTR_RTIS 0x00000040
+#define BM_UARTAPP_INTR_CTSMIEN 0x00020000
+#define BM_UARTAPP_INTR_RXIEN 0x00100000
+#define BM_UARTAPP_INTR_RTIEN 0x00400000
+
+#define HW_UARTAPP_DATA 0x60
+
+#define HW_UARTAPP_STAT 0x70
+#define BM_UARTAPP_STAT_RXCOUNT 0x0000FFFF
+#define BP_UARTAPP_STAT_RXCOUNT 0
+#define BM_UARTAPP_STAT_FERR 0x00010000
+#define BM_UARTAPP_STAT_PERR 0x00020000
+#define BM_UARTAPP_STAT_BERR 0x00040000
+#define BM_UARTAPP_STAT_OERR 0x00080000
+#define BM_UARTAPP_STAT_RXFE 0x01000000
+#define BM_UARTAPP_STAT_TXFF 0x02000000
+#define BM_UARTAPP_STAT_TXFE 0x08000000
+#define BM_UARTAPP_STAT_CTS 0x10000000
+
+#define HW_UARTAPP_VERSION 0x90
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h b/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h
new file mode 100644
index 0000000..b810deb
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-uartdbg.h
@@ -0,0 +1,268 @@
+/*
+ * stmp378x: UARTDBG register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_UARTDBG_BASE (STMP3XXX_REGS_BASE + 0x70000)
+#define REGS_UARTDBG_PHYS 0x80070000
+#define REGS_UARTDBG_SIZE 0x2000
+
+#define HW_UARTDBGDR 0x00000000
+#define BP_UARTDBGDR_UNAVAILABLE 16
+#define BM_UARTDBGDR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDR_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGDR_UNAVAILABLE)
+#define BP_UARTDBGDR_RESERVED 12
+#define BM_UARTDBGDR_RESERVED 0x0000F000
+#define BF_UARTDBGDR_RESERVED(v) \
+ (((v) << 12) & BM_UARTDBGDR_RESERVED)
+#define BM_UARTDBGDR_OE 0x00000800
+#define BM_UARTDBGDR_BE 0x00000400
+#define BM_UARTDBGDR_PE 0x00000200
+#define BM_UARTDBGDR_FE 0x00000100
+#define BP_UARTDBGDR_DATA 0
+#define BM_UARTDBGDR_DATA 0x000000FF
+#define BF_UARTDBGDR_DATA(v) \
+ (((v) << 0) & BM_UARTDBGDR_DATA)
+#define HW_UARTDBGRSR_ECR 0x00000004
+#define BP_UARTDBGRSR_ECR_UNAVAILABLE 8
+#define BM_UARTDBGRSR_ECR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGRSR_ECR_UNAVAILABLE(v) \
+ (((v) << 8) & BM_UARTDBGRSR_ECR_UNAVAILABLE)
+#define BP_UARTDBGRSR_ECR_EC 4
+#define BM_UARTDBGRSR_ECR_EC 0x000000F0
+#define BF_UARTDBGRSR_ECR_EC(v) \
+ (((v) << 4) & BM_UARTDBGRSR_ECR_EC)
+#define BM_UARTDBGRSR_ECR_OE 0x00000008
+#define BM_UARTDBGRSR_ECR_BE 0x00000004
+#define BM_UARTDBGRSR_ECR_PE 0x00000002
+#define BM_UARTDBGRSR_ECR_FE 0x00000001
+#define HW_UARTDBGFR 0x00000018
+#define BP_UARTDBGFR_UNAVAILABLE 16
+#define BM_UARTDBGFR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGFR_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGFR_UNAVAILABLE)
+#define BP_UARTDBGFR_RESERVED 9
+#define BM_UARTDBGFR_RESERVED 0x0000FE00
+#define BF_UARTDBGFR_RESERVED(v) \
+ (((v) << 9) & BM_UARTDBGFR_RESERVED)
+#define BM_UARTDBGFR_RI 0x00000100
+#define BM_UARTDBGFR_TXFE 0x00000080
+#define BM_UARTDBGFR_RXFF 0x00000040
+#define BM_UARTDBGFR_TXFF 0x00000020
+#define BM_UARTDBGFR_RXFE 0x00000010
+#define BM_UARTDBGFR_BUSY 0x00000008
+#define BM_UARTDBGFR_DCD 0x00000004
+#define BM_UARTDBGFR_DSR 0x00000002
+#define BM_UARTDBGFR_CTS 0x00000001
+#define HW_UARTDBGILPR 0x00000020
+#define BP_UARTDBGILPR_UNAVAILABLE 8
+#define BM_UARTDBGILPR_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGILPR_UNAVAILABLE(v) \
+ (((v) << 8) & BM_UARTDBGILPR_UNAVAILABLE)
+#define BP_UARTDBGILPR_ILPDVSR 0
+#define BM_UARTDBGILPR_ILPDVSR 0x000000FF
+#define BF_UARTDBGILPR_ILPDVSR(v) \
+ (((v) << 0) & BM_UARTDBGILPR_ILPDVSR)
+#define HW_UARTDBGIBRD 0x00000024
+#define BP_UARTDBGIBRD_UNAVAILABLE 16
+#define BM_UARTDBGIBRD_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIBRD_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGIBRD_UNAVAILABLE)
+#define BP_UARTDBGIBRD_BAUD_DIVINT 0
+#define BM_UARTDBGIBRD_BAUD_DIVINT 0x0000FFFF
+#define BF_UARTDBGIBRD_BAUD_DIVINT(v) \
+ (((v) << 0) & BM_UARTDBGIBRD_BAUD_DIVINT)
+#define HW_UARTDBGFBRD 0x00000028
+#define BP_UARTDBGFBRD_UNAVAILABLE 8
+#define BM_UARTDBGFBRD_UNAVAILABLE 0xFFFFFF00
+#define BF_UARTDBGFBRD_UNAVAILABLE(v) \
+ (((v) << 8) & BM_UARTDBGFBRD_UNAVAILABLE)
+#define BP_UARTDBGFBRD_RESERVED 6
+#define BM_UARTDBGFBRD_RESERVED 0x000000C0
+#define BF_UARTDBGFBRD_RESERVED(v) \
+ (((v) << 6) & BM_UARTDBGFBRD_RESERVED)
+#define BP_UARTDBGFBRD_BAUD_DIVFRAC 0
+#define BM_UARTDBGFBRD_BAUD_DIVFRAC 0x0000003F
+#define BF_UARTDBGFBRD_BAUD_DIVFRAC(v) \
+ (((v) << 0) & BM_UARTDBGFBRD_BAUD_DIVFRAC)
+#define HW_UARTDBGLCR_H 0x0000002c
+#define BP_UARTDBGLCR_H_UNAVAILABLE 16
+#define BM_UARTDBGLCR_H_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGLCR_H_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGLCR_H_UNAVAILABLE)
+#define BP_UARTDBGLCR_H_RESERVED 8
+#define BM_UARTDBGLCR_H_RESERVED 0x0000FF00
+#define BF_UARTDBGLCR_H_RESERVED(v) \
+ (((v) << 8) & BM_UARTDBGLCR_H_RESERVED)
+#define BM_UARTDBGLCR_H_SPS 0x00000080
+#define BP_UARTDBGLCR_H_WLEN 5
+#define BM_UARTDBGLCR_H_WLEN 0x00000060
+#define BF_UARTDBGLCR_H_WLEN(v) \
+ (((v) << 5) & BM_UARTDBGLCR_H_WLEN)
+#define BM_UARTDBGLCR_H_FEN 0x00000010
+#define BM_UARTDBGLCR_H_STP2 0x00000008
+#define BM_UARTDBGLCR_H_EPS 0x00000004
+#define BM_UARTDBGLCR_H_PEN 0x00000002
+#define BM_UARTDBGLCR_H_BRK 0x00000001
+#define HW_UARTDBGCR 0x00000030
+#define BP_UARTDBGCR_UNAVAILABLE 16
+#define BM_UARTDBGCR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGCR_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGCR_UNAVAILABLE)
+#define BM_UARTDBGCR_CTSEN 0x00008000
+#define BM_UARTDBGCR_RTSEN 0x00004000
+#define BM_UARTDBGCR_OUT2 0x00002000
+#define BM_UARTDBGCR_OUT1 0x00001000
+#define BM_UARTDBGCR_RTS 0x00000800
+#define BM_UARTDBGCR_DTR 0x00000400
+#define BM_UARTDBGCR_RXE 0x00000200
+#define BM_UARTDBGCR_TXE 0x00000100
+#define BM_UARTDBGCR_LBE 0x00000080
+#define BP_UARTDBGCR_RESERVED 3
+#define BM_UARTDBGCR_RESERVED 0x00000078
+#define BF_UARTDBGCR_RESERVED(v) \
+ (((v) << 3) & BM_UARTDBGCR_RESERVED)
+#define BM_UARTDBGCR_SIRLP 0x00000004
+#define BM_UARTDBGCR_SIREN 0x00000002
+#define BM_UARTDBGCR_UARTEN 0x00000001
+#define HW_UARTDBGIFLS 0x00000034
+#define BP_UARTDBGIFLS_UNAVAILABLE 16
+#define BM_UARTDBGIFLS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIFLS_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGIFLS_UNAVAILABLE)
+#define BP_UARTDBGIFLS_RESERVED 6
+#define BM_UARTDBGIFLS_RESERVED 0x0000FFC0
+#define BF_UARTDBGIFLS_RESERVED(v) \
+ (((v) << 6) & BM_UARTDBGIFLS_RESERVED)
+#define BP_UARTDBGIFLS_RXIFLSEL 3
+#define BM_UARTDBGIFLS_RXIFLSEL 0x00000038
+#define BF_UARTDBGIFLS_RXIFLSEL(v) \
+ (((v) << 3) & BM_UARTDBGIFLS_RXIFLSEL)
+#define BV_UARTDBGIFLS_RXIFLSEL__NOT_EMPTY 0x0
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_QUARTER 0x1
+#define BV_UARTDBGIFLS_RXIFLSEL__ONE_HALF 0x2
+#define BV_UARTDBGIFLS_RXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_RXIFLSEL__SEVEN_EIGHTHS 0x4
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID5 0x5
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID6 0x6
+#define BV_UARTDBGIFLS_RXIFLSEL__INVALID7 0x7
+#define BP_UARTDBGIFLS_TXIFLSEL 0
+#define BM_UARTDBGIFLS_TXIFLSEL 0x00000007
+#define BF_UARTDBGIFLS_TXIFLSEL(v) \
+ (((v) << 0) & BM_UARTDBGIFLS_TXIFLSEL)
+#define BV_UARTDBGIFLS_TXIFLSEL__EMPTY 0x0
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_QUARTER 0x1
+#define BV_UARTDBGIFLS_TXIFLSEL__ONE_HALF 0x2
+#define BV_UARTDBGIFLS_TXIFLSEL__THREE_QUARTERS 0x3
+#define BV_UARTDBGIFLS_TXIFLSEL__SEVEN_EIGHTHS 0x4
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID5 0x5
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID6 0x6
+#define BV_UARTDBGIFLS_TXIFLSEL__INVALID7 0x7
+#define HW_UARTDBGIMSC 0x00000038
+#define BP_UARTDBGIMSC_UNAVAILABLE 16
+#define BM_UARTDBGIMSC_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGIMSC_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGIMSC_UNAVAILABLE)
+#define BP_UARTDBGIMSC_RESERVED 11
+#define BM_UARTDBGIMSC_RESERVED 0x0000F800
+#define BF_UARTDBGIMSC_RESERVED(v) \
+ (((v) << 11) & BM_UARTDBGIMSC_RESERVED)
+#define BM_UARTDBGIMSC_OEIM 0x00000400
+#define BM_UARTDBGIMSC_BEIM 0x00000200
+#define BM_UARTDBGIMSC_PEIM 0x00000100
+#define BM_UARTDBGIMSC_FEIM 0x00000080
+#define BM_UARTDBGIMSC_RTIM 0x00000040
+#define BM_UARTDBGIMSC_TXIM 0x00000020
+#define BM_UARTDBGIMSC_RXIM 0x00000010
+#define BM_UARTDBGIMSC_DSRMIM 0x00000008
+#define BM_UARTDBGIMSC_DCDMIM 0x00000004
+#define BM_UARTDBGIMSC_CTSMIM 0x00000002
+#define BM_UARTDBGIMSC_RIMIM 0x00000001
+#define HW_UARTDBGRIS 0x0000003c
+#define BP_UARTDBGRIS_UNAVAILABLE 16
+#define BM_UARTDBGRIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGRIS_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGRIS_UNAVAILABLE)
+#define BP_UARTDBGRIS_RESERVED 11
+#define BM_UARTDBGRIS_RESERVED 0x0000F800
+#define BF_UARTDBGRIS_RESERVED(v) \
+ (((v) << 11) & BM_UARTDBGRIS_RESERVED)
+#define BM_UARTDBGRIS_OERIS 0x00000400
+#define BM_UARTDBGRIS_BERIS 0x00000200
+#define BM_UARTDBGRIS_PERIS 0x00000100
+#define BM_UARTDBGRIS_FERIS 0x00000080
+#define BM_UARTDBGRIS_RTRIS 0x00000040
+#define BM_UARTDBGRIS_TXRIS 0x00000020
+#define BM_UARTDBGRIS_RXRIS 0x00000010
+#define BM_UARTDBGRIS_DSRRMIS 0x00000008
+#define BM_UARTDBGRIS_DCDRMIS 0x00000004
+#define BM_UARTDBGRIS_CTSRMIS 0x00000002
+#define BM_UARTDBGRIS_RIRMIS 0x00000001
+#define HW_UARTDBGMIS 0x00000040
+#define BP_UARTDBGMIS_UNAVAILABLE 16
+#define BM_UARTDBGMIS_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGMIS_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGMIS_UNAVAILABLE)
+#define BP_UARTDBGMIS_RESERVED 11
+#define BM_UARTDBGMIS_RESERVED 0x0000F800
+#define BF_UARTDBGMIS_RESERVED(v) \
+ (((v) << 11) & BM_UARTDBGMIS_RESERVED)
+#define BM_UARTDBGMIS_OEMIS 0x00000400
+#define BM_UARTDBGMIS_BEMIS 0x00000200
+#define BM_UARTDBGMIS_PEMIS 0x00000100
+#define BM_UARTDBGMIS_FEMIS 0x00000080
+#define BM_UARTDBGMIS_RTMIS 0x00000040
+#define BM_UARTDBGMIS_TXMIS 0x00000020
+#define BM_UARTDBGMIS_RXMIS 0x00000010
+#define BM_UARTDBGMIS_DSRMMIS 0x00000008
+#define BM_UARTDBGMIS_DCDMMIS 0x00000004
+#define BM_UARTDBGMIS_CTSMMIS 0x00000002
+#define BM_UARTDBGMIS_RIMMIS 0x00000001
+#define HW_UARTDBGICR 0x00000044
+#define BP_UARTDBGICR_UNAVAILABLE 16
+#define BM_UARTDBGICR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGICR_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGICR_UNAVAILABLE)
+#define BP_UARTDBGICR_RESERVED 11
+#define BM_UARTDBGICR_RESERVED 0x0000F800
+#define BF_UARTDBGICR_RESERVED(v) \
+ (((v) << 11) & BM_UARTDBGICR_RESERVED)
+#define BM_UARTDBGICR_OEIC 0x00000400
+#define BM_UARTDBGICR_BEIC 0x00000200
+#define BM_UARTDBGICR_PEIC 0x00000100
+#define BM_UARTDBGICR_FEIC 0x00000080
+#define BM_UARTDBGICR_RTIC 0x00000040
+#define BM_UARTDBGICR_TXIC 0x00000020
+#define BM_UARTDBGICR_RXIC 0x00000010
+#define BM_UARTDBGICR_DSRMIC 0x00000008
+#define BM_UARTDBGICR_DCDMIC 0x00000004
+#define BM_UARTDBGICR_CTSMIC 0x00000002
+#define BM_UARTDBGICR_RIMIC 0x00000001
+#define HW_UARTDBGDMACR 0x00000048
+#define BP_UARTDBGDMACR_UNAVAILABLE 16
+#define BM_UARTDBGDMACR_UNAVAILABLE 0xFFFF0000
+#define BF_UARTDBGDMACR_UNAVAILABLE(v) \
+ (((v) << 16) & BM_UARTDBGDMACR_UNAVAILABLE)
+#define BP_UARTDBGDMACR_RESERVED 3
+#define BM_UARTDBGDMACR_RESERVED 0x0000FFF8
+#define BF_UARTDBGDMACR_RESERVED(v) \
+ (((v) << 3) & BM_UARTDBGDMACR_RESERVED)
+#define BM_UARTDBGDMACR_DMAONERR 0x00000004
+#define BM_UARTDBGDMACR_TXDMAE 0x00000002
+#define BM_UARTDBGDMACR_RXDMAE 0x00000001
diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h
index 9e197ae..9145e22 100644
--- a/arch/arm/mach-imx/include/mach/io.h
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbctl.h
@@ -1,7 +1,8 @@
/*
- * arch/arm/mach-imxads/include/mach/io.h
+ * stmp37xx: USBCTL register definitions
*
- * Copyright (C) 1999 ARM Limited
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,14 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-
-#endif
+#define REGS_USBCTL_BASE (STMP3XXX_REGS_BASE + 0x80000)
+#define REGS_USBCTL_PHYS 0x80000
diff --git a/arch/arm/mach-imx/include/mach/timex.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h
index e22ba78..1a2ae9c 100644
--- a/arch/arm/mach-imx/include/mach/timex.h
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbctrl.h
@@ -1,7 +1,8 @@
/*
- * linux/include/asm-arm/imx/timex.h
+ * stmp37xx: USBCTRL register definitions
*
- * Copyright (C) 1999 ARM Limited
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,12 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE (16000000)
-
-#endif
+#define REGS_USBCTRL_BASE (STMP3XXX_REGS_BASE + 0x80000)
+#define REGS_USBCTRL_PHYS 0x80080000
diff --git a/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h b/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h
new file mode 100644
index 0000000..b7fce0f
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/include/mach/regs-usbphy.h
@@ -0,0 +1,37 @@
+/*
+ * stmp37xx: USBPHY register definitions
+ *
+ * Copyright (c) 2008 Freescale Semiconductor
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define REGS_USBPHY_BASE (STMP3XXX_REGS_BASE + 0x7C000)
+
+#define HW_USBPHY_PWD 0x0
+
+#define HW_USBPHY_CTRL 0x30
+#define BM_USBPHY_CTRL_ENHSPRECHARGEXMIT 0x00000001
+#define BP_USBPHY_CTRL_ENHSPRECHARGEXMIT 0
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT 0x00000002
+#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT 0x00000010
+#define BM_USBPHY_CTRL_ENOTGIDDETECT 0x00000080
+#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN 0x00000800
+#define BM_USBPHY_CTRL_CLKGATE 0x40000000
+#define BM_USBPHY_CTRL_SFTRST 0x80000000
+
+#define HW_USBPHY_STATUS 0x40
+#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS 0x00000040
+#define BM_USBPHY_STATUS_OTGID_STATUS 0x00000100
diff --git a/arch/arm/mach-stmp37xx/stmp37xx.c b/arch/arm/mach-stmp37xx/stmp37xx.c
new file mode 100644
index 0000000..8c7d6fb
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/stmp37xx.c
@@ -0,0 +1,219 @@
+/*
+ * Freescale STMP37XX platform support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/dma.h>
+
+#include <mach/platform.h>
+#include <mach/regs-icoll.h>
+#include <mach/regs-apbh.h>
+#include <mach/regs-apbx.h>
+#include "stmp37xx.h"
+
+/*
+ * IRQ handling
+ */
+static void stmp37xx_ack_irq(unsigned int irq)
+{
+ /* Disable IRQ */
+ stmp3xxx_clearl(0x04 << ((irq % 4) * 8),
+ REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10);
+
+ /* ACK current interrupt */
+ __raw_writel(1, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
+
+ /* Barrier */
+ (void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
+}
+
+static void stmp37xx_mask_irq(unsigned int irq)
+{
+ /* IRQ disable */
+ stmp3xxx_clearl(0x04 << ((irq % 4) * 8),
+ REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10);
+}
+
+static void stmp37xx_unmask_irq(unsigned int irq)
+{
+ /* IRQ enable */
+ stmp3xxx_setl(0x04 << ((irq % 4) * 8),
+ REGS_ICOLL_BASE + HW_ICOLL_PRIORITYn + irq / 4 * 0x10);
+}
+
+static struct irq_chip stmp37xx_chip = {
+ .ack = stmp37xx_ack_irq,
+ .mask = stmp37xx_mask_irq,
+ .unmask = stmp37xx_unmask_irq,
+};
+
+void __init stmp37xx_init_irq(void)
+{
+ stmp3xxx_init_irq(&stmp37xx_chip);
+}
+
+/*
+ * DMA interrupt handling
+ */
+void stmp3xxx_arch_dma_enable_interrupt(int channel)
+{
+ switch (STMP3XXX_DMA_BUS(channel)) {
+ case STMP3XXX_BUS_APBH:
+ stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)),
+ REGS_APBH_BASE + HW_APBH_CTRL1);
+ break;
+
+ case STMP3XXX_BUS_APBX:
+ stmp3xxx_setl(1 << (8 + STMP3XXX_DMA_CHANNEL(channel)),
+ REGS_APBX_BASE + HW_APBX_CTRL1);
+ break;
+ }
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_enable_interrupt);
+
+void stmp3xxx_arch_dma_clear_interrupt(int channel)
+{
+ switch (STMP3XXX_DMA_BUS(channel)) {
+ case STMP3XXX_BUS_APBH:
+ stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel),
+ REGS_APBH_BASE + HW_APBH_CTRL1);
+ break;
+
+ case STMP3XXX_BUS_APBX:
+ stmp3xxx_clearl(1 << STMP3XXX_DMA_CHANNEL(channel),
+ REGS_APBX_BASE + HW_APBX_CTRL1);
+ break;
+ }
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_clear_interrupt);
+
+int stmp3xxx_arch_dma_is_interrupt(int channel)
+{
+ int r = 0;
+
+ switch (STMP3XXX_DMA_BUS(channel)) {
+ case STMP3XXX_BUS_APBH:
+ r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
+ (1 << STMP3XXX_DMA_CHANNEL(channel));
+ break;
+
+ case STMP3XXX_BUS_APBX:
+ r = __raw_readl(REGS_APBH_BASE + HW_APBH_CTRL1) &
+ (1 << STMP3XXX_DMA_CHANNEL(channel));
+ break;
+ }
+ return r;
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_is_interrupt);
+
+void stmp3xxx_arch_dma_reset_channel(int channel)
+{
+ unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+
+ switch (STMP3XXX_DMA_BUS(channel)) {
+ case STMP3XXX_BUS_APBH:
+ /* Reset channel and wait for it to complete */
+ stmp3xxx_setl(chbit << BP_APBH_CTRL0_RESET_CHANNEL,
+ REGS_APBH_BASE + HW_APBH_CTRL0);
+ while (__raw_readl(REGS_APBH_BASE + HW_APBH_CTRL0) &
+ (chbit << BP_APBH_CTRL0_RESET_CHANNEL))
+ cpu_relax();
+ break;
+
+ case STMP3XXX_BUS_APBX:
+ stmp3xxx_setl(chbit << BP_APBX_CTRL0_RESET_CHANNEL,
+ REGS_APBX_BASE + HW_APBX_CTRL0);
+ while (__raw_readl(REGS_APBX_BASE + HW_APBX_CTRL0) &
+ (chbit << BP_APBX_CTRL0_RESET_CHANNEL))
+ cpu_relax();
+ break;
+ }
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_reset_channel);
+
+void stmp3xxx_arch_dma_freeze(int channel)
+{
+ unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+
+ switch (STMP3XXX_DMA_BUS(channel)) {
+ case STMP3XXX_BUS_APBH:
+ stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+ break;
+ case STMP3XXX_BUS_APBX:
+ stmp3xxx_setl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+ break;
+ }
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_freeze);
+
+void stmp3xxx_arch_dma_unfreeze(int channel)
+{
+ unsigned chbit = 1 << STMP3XXX_DMA_CHANNEL(channel);
+
+ switch (STMP3XXX_DMA_BUS(channel)) {
+ case STMP3XXX_BUS_APBH:
+ stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+ break;
+ case STMP3XXX_BUS_APBX:
+ stmp3xxx_clearl(1 << chbit, REGS_APBH_BASE + HW_APBH_CTRL0);
+ break;
+ }
+}
+EXPORT_SYMBOL(stmp3xxx_arch_dma_unfreeze);
+
+/*
+ * The registers are all very closely mapped, so we might as well map them all
+ * with a single mapping
+ *
+ * Logical Physical
+ * f0000000 80000000 On-chip registers
+ * f1000000 00000000 32k on-chip SRAM
+ */
+static struct map_desc stmp37xx_io_desc[] __initdata = {
+ {
+ .virtual = (u32)STMP3XXX_REGS_BASE,
+ .pfn = __phys_to_pfn(STMP3XXX_REGS_PHBASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = (u32)STMP3XXX_OCRAM_BASE,
+ .pfn = __phys_to_pfn(STMP3XXX_OCRAM_PHBASE),
+ .length = STMP3XXX_OCRAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init stmp37xx_map_io(void)
+{
+ iotable_init(stmp37xx_io_desc, ARRAY_SIZE(stmp37xx_io_desc));
+}
diff --git a/arch/arm/mach-stmp37xx/stmp37xx.h b/arch/arm/mach-stmp37xx/stmp37xx.h
new file mode 100644
index 0000000..0b75fb7
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/stmp37xx.h
@@ -0,0 +1,24 @@
+/*
+ * Freescale STMP37XX/STMP378X internal functions and data declarations
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __MACH_STMP37XX_H
+#define __MACH_STMP37XX_H
+
+void stmp37xx_map_io(void);
+void stmp37xx_init_irq(void);
+
+#endif /* __MACH_STMP37XX_H */
diff --git a/arch/arm/mach-stmp37xx/stmp37xx_devb.c b/arch/arm/mach-stmp37xx/stmp37xx_devb.c
new file mode 100644
index 0000000..394f21a
--- /dev/null
+++ b/arch/arm/mach-stmp37xx/stmp37xx_devb.c
@@ -0,0 +1,101 @@
+/*
+ * Freescale STMP37XX development board support
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+#include "stmp37xx.h"
+
+/*
+ * List of STMP37xx development board specific devices
+ */
+static struct platform_device *stmp37xx_devb_devices[] = {
+ &stmp3xxx_dbguart,
+ &stmp3xxx_appuart,
+};
+
+static struct pin_desc dbguart_pins_0[] = {
+ { PINID_PWM0, PIN_FUN3, },
+ { PINID_PWM1, PIN_FUN3, },
+};
+
+struct pin_desc appuart_pins_0[] = {
+ { PINID_UART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+ { PINID_UART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+ { PINID_UART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+ { PINID_UART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
+};
+
+static struct pin_group appuart_pins[] = {
+ [0] = {
+ .pins = appuart_pins_0,
+ .nr_pins = ARRAY_SIZE(appuart_pins_0),
+ },
+ /* 37xx has the only app uart */
+};
+
+static struct pin_group dbguart_pins[] = {
+ [0] = {
+ .pins = dbguart_pins_0,
+ .nr_pins = ARRAY_SIZE(dbguart_pins_0),
+ },
+};
+
+static int dbguart_pins_control(int id, int request)
+{
+ int r = 0;
+
+ if (request)
+ r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
+ else
+ stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
+ return r;
+}
+
+
+static void __init stmp37xx_devb_init(void)
+{
+ stmp3xxx_pinmux_init(NR_REAL_IRQS);
+
+ /* Init STMP3xxx platform */
+ stmp3xxx_init();
+
+ stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
+ stmp3xxx_appuart.dev.platform_data = appuart_pins;
+
+ /* Add STMP37xx development board devices */
+ platform_add_devices(stmp37xx_devb_devices,
+ ARRAY_SIZE(stmp37xx_devb_devices));
+}
+
+MACHINE_START(STMP37XX, "STMP37XX")
+ .phys_io = 0x80000000,
+ .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc,
+ .boot_params = 0x40000100,
+ .map_io = stmp37xx_map_io,
+ .init_irq = stmp37xx_init_irq,
+ .timer = &stmp3xxx_timer,
+ .init_machine = stmp37xx_devb_init,
+MACHINE_END
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
new file mode 100644
index 0000000..337b9aa
--- /dev/null
+++ b/arch/arm/mach-u300/Kconfig
@@ -0,0 +1,105 @@
+if ARCH_U300
+
+menu "ST-Ericsson AB U300/U330/U335/U365 Platform"
+
+comment "ST-Ericsson Mobile Platform Products"
+
+config MACH_U300
+ bool "U300"
+
+comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
+
+choice
+ prompt "U300/U330/U335/U365 system type"
+ default MACH_U300_BS2X
+ ---help---
+ You need to select the target system, i.e. the
+ U300/U330/U335/U365 board that you want to compile your kernel
+ for.
+
+config MACH_U300_BS2X
+ bool "S26/S26/B25/B26 Test Products"
+ depends on MACH_U300
+ help
+ Select this if you're developing on the
+ S26/S25 test products. (Also works on
+ B26/B25 big boards.)
+
+config MACH_U300_BS330
+ bool "S330/B330 Test Products"
+ depends on MACH_U300
+ help
+ Select this if you're developing on the
+ S330/B330 test products.
+
+config MACH_U300_BS335
+ bool "S335/B335 Test Products"
+ depends on MACH_U300
+ help
+ Select this if you're developing on the
+ S335/B335 test products.
+
+config MACH_U300_BS365
+ bool "S365/B365 Test Products"
+ depends on MACH_U300
+ help
+ Select this if you're developing on the
+ S365/B365 test products.
+
+endchoice
+
+choice
+ prompt "Memory configuration"
+ default MACH_U300_SINGLE_RAM
+ ---help---
+ You have to config the kernel according to the physical memory
+ configuration.
+
+config MACH_U300_SINGLE_RAM
+ bool "Single RAM"
+ help
+ Select this if you want support for Single RAM phones.
+
+config MACH_U300_DUAL_RAM
+ bool "Dual RAM"
+ help
+ Select this if you want support for Dual RAM phones.
+ This is two RAM memorys on different EMIFs.
+endchoice
+
+config U300_DEBUG
+ bool "Debug support for U300"
+ depends on PM
+ help
+ Debug support for U300 in sysfs, procfs etc.
+
+config MACH_U300_SEMI_IS_SHARED
+ bool "The SEMI is used by both the access and application side"
+ depends on MACH_U300
+ help
+ This makes it possible to use the SEMI (Shared External
+ Memory Interface) from both from access and application
+ side.
+
+comment "All the settings below must match the bootloader's settings"
+
+config MACH_U300_ACCESS_MEM_SIZE
+ int "Access CPU memory allocation"
+ range 7 25
+ depends on MACH_U300_SINGLE_RAM
+ default 13
+ help
+ How much memory in MiB that the Access side CPU has allocated
+
+config MACH_U300_2MB_ALIGNMENT_FIX
+ bool "2MiB alignment fix"
+ depends on MACH_U300_SINGLE_RAM
+ default y
+ help
+ If yes and the Access side CPU has allocated an odd size in
+ MiB, this fix gives you one MiB extra that would otherwise be
+ lost due to Linux 2 MiB alignment policy.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
new file mode 100644
index 0000000..24950e0
--- /dev/null
+++ b/arch/arm/mach-u300/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the linux kernel, U300 machine.
+#
+
+obj-y := core.o clock.o timer.o gpio.o padmux.o
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_ARCH_U300) += u300.o
+obj-$(CONFIG_MMC) += mmc.o
diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot
new file mode 100644
index 0000000..6fbfc6e
--- /dev/null
+++ b/arch/arm/mach-u300/Makefile.boot
@@ -0,0 +1,15 @@
+# Note: the following conditions must always be true:
+# ZRELADDR == virt_to_phys(TEXTADDR)
+# PARAMS_PHYS must be within 4MB of ZRELADDR
+# INITRD_PHYS must be in RAM
+
+ifdef CONFIG_MACH_U300_SINGLE_RAM
+ zreladdr-y := 0x28E08000
+ params_phys-y := 0x28E00100
+else
+ zreladdr-y := 0x48008000
+ params_phys-y := 0x48000100
+endif
+
+# This isn't used.
+#initrd_phys-y := 0x29800000
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
new file mode 100644
index 0000000..5cd04d6
--- /dev/null
+++ b/arch/arm/mach-u300/clock.c
@@ -0,0 +1,1487 @@
+/*
+ *
+ * arch/arm/mach-u300/clock.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Define clocks in the app platform.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+#include "clock.h"
+
+/*
+ * TODO:
+ * - move all handling of the CCR register into this file and create
+ * a spinlock for the CCR register
+ * - switch to the clkdevice lookup mechanism that maps clocks to
+ * device ID:s instead when it becomes available in kernel 2.6.29.
+ * - implement rate get/set for all clocks that need it.
+ */
+
+/*
+ * Syscon clock I/O registers lock so clock requests don't collide
+ * NOTE: this is a local lock only used to lock access to clock and
+ * reset registers in syscon.
+ */
+static DEFINE_SPINLOCK(syscon_clkreg_lock);
+static DEFINE_SPINLOCK(syscon_resetreg_lock);
+
+/*
+ * The clocking hierarchy currently looks like this.
+ * NOTE: the idea is NOT to show how the clocks are routed on the chip!
+ * The ideas is to show dependencies, so a clock higher up in the
+ * hierarchy has to be on in order for another clock to be on. Now,
+ * both CPU and DMA can actually be on top of the hierarchy, and that
+ * is not modeled currently. Instead we have the backbone AMBA bus on
+ * top. This bus cannot be programmed in any way but conceptually it
+ * needs to be active for the bridges and devices to transport data.
+ *
+ * Please be aware that a few clocks are hw controlled, which mean that
+ * the hw itself can turn on/off or change the rate of the clock when
+ * needed!
+ *
+ * AMBA bus
+ * |
+ * +- CPU
+ * +- NANDIF NAND Flash interface
+ * +- SEMI Shared Memory interface
+ * +- ISP Image Signal Processor (U335 only)
+ * +- CDS (U335 only)
+ * +- DMA Direct Memory Access Controller
+ * +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
+ * +- APEX
+ * +- VIDEO_ENC AVE2/3 Video Encoder
+ * +- XGAM Graphics Accelerator Controller
+ * +- AHB
+ * |
+ * +- ahb:0 AHB Bridge
+ * | |
+ * | +- ahb:1 INTCON Interrupt controller
+ * | +- ahb:3 MSPRO Memory Stick Pro controller
+ * | +- ahb:4 EMIF External Memory interface
+ * |
+ * +- fast:0 FAST bridge
+ * | |
+ * | +- fast:1 MMCSD MMC/SD card reader controller
+ * | +- fast:2 I2S0 PCM I2S channel 0 controller
+ * | +- fast:3 I2S1 PCM I2S channel 1 controller
+ * | +- fast:4 I2C0 I2C channel 0 controller
+ * | +- fast:5 I2C1 I2C channel 1 controller
+ * | +- fast:6 SPI SPI controller
+ * | +- fast:7 UART1 Secondary UART (U335 only)
+ * |
+ * +- slow:0 SLOW bridge
+ * |
+ * +- slow:1 SYSCON (not possible to control)
+ * +- slow:2 WDOG Watchdog
+ * +- slow:3 UART0 primary UART
+ * +- slow:4 TIMER_APP Application timer - used in Linux
+ * +- slow:5 KEYPAD controller
+ * +- slow:6 GPIO controller
+ * +- slow:7 RTC controller
+ * +- slow:8 BT Bus Tracer (not used currently)
+ * +- slow:9 EH Event Handler (not used currently)
+ * +- slow:a TIMER_ACC Access style timer (not used currently)
+ * +- slow:b PPM (U335 only, what is that?)
+ */
+
+/*
+ * Reset control functions. We remember if a block has been
+ * taken out of reset and don't remove the reset assertion again
+ * and vice versa. Currently we only remove resets so the
+ * enablement function is defined out.
+ */
+static void syscon_block_reset_enable(struct clk *clk)
+{
+ u16 val;
+ unsigned long iflags;
+
+ /* Not all blocks support resetting */
+ if (!clk->res_reg || !clk->res_mask)
+ return;
+ spin_lock_irqsave(&syscon_resetreg_lock, iflags);
+ val = readw(clk->res_reg);
+ val |= clk->res_mask;
+ writew(val, clk->res_reg);
+ spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
+ clk->reset = true;
+}
+
+static void syscon_block_reset_disable(struct clk *clk)
+{
+ u16 val;
+ unsigned long iflags;
+
+ /* Not all blocks support resetting */
+ if (!clk->res_reg || !clk->res_mask)
+ return;
+ spin_lock_irqsave(&syscon_resetreg_lock, iflags);
+ val = readw(clk->res_reg);
+ val &= ~clk->res_mask;
+ writew(val, clk->res_reg);
+ spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
+ clk->reset = false;
+}
+
+int __clk_get(struct clk *clk)
+{
+ u16 val;
+
+ /* The MMC and MSPRO clocks need some special set-up */
+ if (!strcmp(clk->name, "MCLK")) {
+ /* Set default MMC clock divisor to 18.9 MHz */
+ writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+ /* Disable the MMC feedback clock */
+ val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
+ /* Disable MSPRO frequency */
+ val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+ }
+ if (!strcmp(clk->name, "MSPRO")) {
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+ /* Disable the MMC feedback clock */
+ val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
+ /* Enable MSPRO frequency */
+ val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
+ }
+ return 1;
+}
+EXPORT_SYMBOL(__clk_get);
+
+void __clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(__clk_put);
+
+static void syscon_clk_disable(struct clk *clk)
+{
+ unsigned long iflags;
+
+ /* Don't touch the hardware controlled clocks */
+ if (clk->hw_ctrld)
+ return;
+
+ spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+ writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR);
+ spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void syscon_clk_enable(struct clk *clk)
+{
+ unsigned long iflags;
+
+ /* Don't touch the hardware controlled clocks */
+ if (clk->hw_ctrld)
+ return;
+
+ spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+ writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER);
+ spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static u16 syscon_clk_get_rate(void)
+{
+ u16 val;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+ spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+ return val;
+}
+
+#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
+static void enable_i2s0_vcxo(void)
+{
+ u16 val;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+ /* Set I2S0 to use the VCXO 26 MHz clock */
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ val |= U300_SYSCON_CCR_TURN_VCXO_ON;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ val |= U300_SYSCON_CCR_I2S0_USE_VCXO;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+ val |= U300_SYSCON_CEFR_I2S0_CLK_EN;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+ spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void enable_i2s1_vcxo(void)
+{
+ u16 val;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+ /* Set I2S1 to use the VCXO 26 MHz clock */
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ val |= U300_SYSCON_CCR_TURN_VCXO_ON;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ val |= U300_SYSCON_CCR_I2S1_USE_VCXO;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+ val |= U300_SYSCON_CEFR_I2S1_CLK_EN;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+ spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void disable_i2s0_vcxo(void)
+{
+ u16 val;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+ /* Disable I2S0 use of the VCXO 26 MHz clock */
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ /* Deactivate VCXO if noone else is using VCXO */
+ if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
+ val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+ val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+ spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+static void disable_i2s1_vcxo(void)
+{
+ u16 val;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+ /* Disable I2S1 use of the VCXO 26 MHz clock */
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ /* Deactivate VCXO if noone else is using VCXO */
+ if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
+ val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+ val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
+ spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */
+
+
+static void syscon_clk_rate_set_mclk(unsigned long rate)
+{
+ u16 val;
+ u32 reg;
+ unsigned long iflags;
+
+ switch (rate) {
+ case 18900000:
+ val = 0x0054;
+ break;
+ case 20800000:
+ val = 0x0044;
+ break;
+ case 23100000:
+ val = 0x0043;
+ break;
+ case 26000000:
+ val = 0x0033;
+ break;
+ case 29700000:
+ val = 0x0032;
+ break;
+ case 34700000:
+ val = 0x0022;
+ break;
+ case 41600000:
+ val = 0x0021;
+ break;
+ case 52000000:
+ val = 0x0011;
+ break;
+ case 104000000:
+ val = 0x0000;
+ break;
+ default:
+ printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n",
+ rate);
+ return;
+ }
+
+ spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+ reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
+ ~U300_SYSCON_MMF0R_MASK;
+ writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
+ spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+
+void syscon_clk_rate_set_cpuclk(unsigned long rate)
+{
+ u16 val;
+ unsigned long iflags;
+
+ switch (rate) {
+ case 13000000:
+ val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
+ break;
+ case 52000000:
+ val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
+ break;
+ case 104000000:
+ val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
+ break;
+ case 208000000:
+ val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
+ break;
+ default:
+ return;
+ }
+ spin_lock_irqsave(&syscon_clkreg_lock, iflags);
+ val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) &
+ ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
+}
+EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long iflags;
+
+ spin_lock_irqsave(&clk->lock, iflags);
+ if (clk->usecount > 0 && !(--clk->usecount)) {
+ /* some blocks lack clocking registers and cannot be disabled */
+ if (clk->disable)
+ clk->disable(clk);
+ if (likely((u32)clk->parent))
+ clk_disable(clk->parent);
+ }
+#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
+ if (unlikely(!strcmp(clk->name, "I2S0")))
+ disable_i2s0_vcxo();
+ if (unlikely(!strcmp(clk->name, "I2S1")))
+ disable_i2s1_vcxo();
+#endif
+ spin_unlock_irqrestore(&clk->lock, iflags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+int clk_enable(struct clk *clk)
+{
+ int ret = 0;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&clk->lock, iflags);
+ if (clk->usecount++ == 0) {
+ if (likely((u32)clk->parent))
+ ret = clk_enable(clk->parent);
+
+ if (unlikely(ret != 0))
+ clk->usecount--;
+ else {
+ /* remove reset line (we never enable reset again) */
+ syscon_block_reset_disable(clk);
+ /* clocks without enable function are always on */
+ if (clk->enable)
+ clk->enable(clk);
+#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
+ if (unlikely(!strcmp(clk->name, "I2S0")))
+ enable_i2s0_vcxo();
+ if (unlikely(!strcmp(clk->name, "I2S1")))
+ enable_i2s1_vcxo();
+#endif
+ }
+ }
+ spin_unlock_irqrestore(&clk->lock, iflags);
+ return ret;
+
+}
+EXPORT_SYMBOL(clk_enable);
+
+/* Returns the clock rate in Hz */
+static unsigned long clk_get_rate_cpuclk(struct clk *clk)
+{
+ u16 val;
+
+ val = syscon_clk_get_rate();
+
+ switch (val) {
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+ return 13000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+ return 52000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+ return 104000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+ return 208000000;
+ default:
+ break;
+ }
+ return clk->rate;
+}
+
+static unsigned long clk_get_rate_ahb_clk(struct clk *clk)
+{
+ u16 val;
+
+ val = syscon_clk_get_rate();
+
+ switch (val) {
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+ return 6500000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+ return 26000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+ return 52000000;
+ default:
+ break;
+ }
+ return clk->rate;
+
+}
+
+static unsigned long clk_get_rate_emif_clk(struct clk *clk)
+{
+ u16 val;
+
+ val = syscon_clk_get_rate();
+
+ switch (val) {
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+ return 13000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+ return 52000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+ return 104000000;
+ default:
+ break;
+ }
+ return clk->rate;
+
+}
+
+static unsigned long clk_get_rate_xgamclk(struct clk *clk)
+{
+ u16 val;
+
+ val = syscon_clk_get_rate();
+
+ switch (val) {
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+ return 6500000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+ return 26000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+ return 52000000;
+ default:
+ break;
+ }
+
+ return clk->rate;
+}
+
+static unsigned long clk_get_rate_mclk(struct clk *clk)
+{
+ u16 val;
+
+ val = syscon_clk_get_rate();
+
+ switch (val) {
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+ /*
+ * Here, the 208 MHz PLL gets shut down and the always
+ * on 13 MHz PLL used for RTC etc kicks into use
+ * instead.
+ */
+ return 13000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+ {
+ /*
+ * This clock is under program control. The register is
+ * divided in two nybbles, bit 7-4 gives cycles-1 to count
+ * high, bit 3-0 gives cycles-1 to count low. Distribute
+ * these with no more than 1 cycle difference between
+ * low and high and add low and high to get the actual
+ * divisor. The base PLL is 208 MHz. Writing 0x00 will
+ * divide by 1 and 1 so the highest frequency possible
+ * is 104 MHz.
+ *
+ * e.g. 0x54 =>
+ * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
+ */
+ u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
+ U300_SYSCON_MMF0R_MASK;
+ switch (val) {
+ case 0x0054:
+ return 18900000;
+ case 0x0044:
+ return 20800000;
+ case 0x0043:
+ return 23100000;
+ case 0x0033:
+ return 26000000;
+ case 0x0032:
+ return 29700000;
+ case 0x0022:
+ return 34700000;
+ case 0x0021:
+ return 41600000;
+ case 0x0011:
+ return 52000000;
+ case 0x0000:
+ return 104000000;
+ default:
+ break;
+ }
+ }
+ default:
+ break;
+ }
+
+ return clk->rate;
+}
+
+static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk)
+{
+ u16 val;
+
+ val = syscon_clk_get_rate();
+
+ switch (val) {
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
+ return 13000000;
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
+ case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
+ return 26000000;
+ default:
+ break;
+ }
+
+ return clk->rate;
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (clk->get_rate)
+ return clk->get_rate(clk);
+ else
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
+{
+ if (rate >= 18900000)
+ return 18900000;
+ if (rate >= 20800000)
+ return 20800000;
+ if (rate >= 23100000)
+ return 23100000;
+ if (rate >= 26000000)
+ return 26000000;
+ if (rate >= 29700000)
+ return 29700000;
+ if (rate >= 34700000)
+ return 34700000;
+ if (rate >= 41600000)
+ return 41600000;
+ if (rate >= 52000000)
+ return 52000000;
+ return -EINVAL;
+}
+
+static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
+{
+ if (rate >= 13000000)
+ return 13000000;
+ if (rate >= 52000000)
+ return 52000000;
+ if (rate >= 104000000)
+ return 104000000;
+ if (rate >= 208000000)
+ return 208000000;
+ return -EINVAL;
+}
+
+/*
+ * This adjusts a requested rate to the closest exact rate
+ * a certain clock can provide. For a fixed clock it's
+ * mostly clk->rate.
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ /* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */
+ /* Else default to fixed value */
+
+ if (clk->round_rate) {
+ return (long) clk->round_rate(clk, rate);
+ } else {
+ printk(KERN_ERR "clock: Failed to round rate of %s\n",
+ clk->name);
+ }
+ return (long) clk->rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+static int clk_set_rate_mclk(struct clk *clk, unsigned long rate)
+{
+ syscon_clk_rate_set_mclk(clk_round_rate(clk, rate));
+ return 0;
+}
+
+static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate)
+{
+ syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate));
+ return 0;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ /* TODO: set for EMIFCLK and AHBCLK */
+ /* Else assume the clock is fixed and fail */
+ if (clk->set_rate) {
+ return clk->set_rate(clk, rate);
+ } else {
+ printk(KERN_ERR "clock: Failed to set %s to %ld hz\n",
+ clk->name, rate);
+ return -EINVAL;
+ }
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/*
+ * Clock definitions. The clock parents are set to respective
+ * bridge and the clock framework makes sure that the clocks have
+ * parents activated and are brought out of reset when in use.
+ *
+ * Clocks that have hw_ctrld = true are hw controlled, and the hw
+ * can by itself turn these clocks on and off.
+ * So in other words, we don't really have to care about them.
+ */
+
+static struct clk amba_clk = {
+ .name = "AMBA",
+ .rate = 52000000, /* this varies! */
+ .hw_ctrld = true,
+ .reset = false,
+};
+
+/*
+ * These blocks are connected directly to the AMBA bus
+ * with no bridge.
+ */
+
+static struct clk cpu_clk = {
+ .name = "CPU",
+ .parent = &amba_clk,
+ .rate = 208000000, /* this varies! */
+ .hw_ctrld = true,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+ .res_mask = U300_SYSCON_RRR_CPU_RESET_EN,
+ .set_rate = clk_set_rate_cpuclk,
+ .get_rate = clk_get_rate_cpuclk,
+ .round_rate = clk_round_rate_cpuclk,
+};
+
+static struct clk nandif_clk = {
+ .name = "NANDIF",
+ .parent = &amba_clk,
+ .hw_ctrld = false,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+ .res_mask = U300_SYSCON_RRR_NANDIF_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+static struct clk semi_clk = {
+ .name = "SEMI",
+ .parent = &amba_clk,
+ .rate = 0, /* FIXME */
+ /* It is not possible to reset SEMI */
+ .hw_ctrld = false,
+ .reset = false,
+ .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+static struct clk isp_clk = {
+ .name = "ISP",
+ .parent = &amba_clk,
+ .rate = 0, /* FIXME */
+ .hw_ctrld = false,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+ .res_mask = U300_SYSCON_RRR_ISP_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_ISP_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+static struct clk cds_clk = {
+ .name = "CDS",
+ .parent = &amba_clk,
+ .rate = 0, /* FIXME */
+ .hw_ctrld = false,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+ .res_mask = U300_SYSCON_RRR_CDS_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_CDS_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+#endif
+
+static struct clk dma_clk = {
+ .name = "DMA",
+ .parent = &amba_clk,
+ .rate = 52000000, /* this varies! */
+ .hw_ctrld = true,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+ .res_mask = U300_SYSCON_RRR_DMAC_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+static struct clk aaif_clk = {
+ .name = "AAIF",
+ .parent = &amba_clk,
+ .rate = 52000000, /* this varies! */
+ .hw_ctrld = true,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+ .res_mask = U300_SYSCON_RRR_AAIF_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+static struct clk apex_clk = {
+ .name = "APEX",
+ .parent = &amba_clk,
+ .rate = 0, /* FIXME */
+ .hw_ctrld = true,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+ .res_mask = U300_SYSCON_RRR_APEX_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_APEX_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+static struct clk video_enc_clk = {
+ .name = "VIDEO_ENC",
+ .parent = &amba_clk,
+ .rate = 208000000, /* this varies! */
+ .hw_ctrld = false,
+ .reset = false,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+ /* This has XGAM in the name but refers to the video encoder */
+ .res_mask = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+static struct clk xgam_clk = {
+ .name = "XGAMCLK",
+ .parent = &amba_clk,
+ .rate = 52000000, /* this varies! */
+ .hw_ctrld = false,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+ .res_mask = U300_SYSCON_RRR_XGAM_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_XGAM_CLK_EN,
+ .get_rate = clk_get_rate_xgamclk,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+/* This clock is used to activate the video encoder */
+static struct clk ahb_clk = {
+ .name = "AHB",
+ .parent = &amba_clk,
+ .rate = 52000000, /* this varies! */
+ .hw_ctrld = false, /* This one is set to false due to HW bug */
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+ .res_mask = U300_SYSCON_RRR_AHB_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_AHB_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+ .get_rate = clk_get_rate_ahb_clk,
+};
+
+
+/*
+ * Clocks on the AHB bridge
+ */
+
+static struct clk ahb_subsys_clk = {
+ .name = "AHB_SUBSYS",
+ .parent = &amba_clk,
+ .rate = 52000000, /* this varies! */
+ .hw_ctrld = true,
+ .reset = false,
+ .clk_val = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+ .get_rate = clk_get_rate_ahb_clk,
+};
+
+static struct clk intcon_clk = {
+ .name = "INTCON",
+ .parent = &ahb_subsys_clk,
+ .rate = 52000000, /* this varies! */
+ .hw_ctrld = false,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+ .res_mask = U300_SYSCON_RRR_INTCON_RESET_EN,
+ /* INTCON can be reset but not clock-gated */
+};
+
+static struct clk mspro_clk = {
+ .name = "MSPRO",
+ .parent = &ahb_subsys_clk,
+ .rate = 0, /* FIXME */
+ .hw_ctrld = false,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+ .res_mask = U300_SYSCON_RRR_MSPRO_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+static struct clk emif_clk = {
+ .name = "EMIF",
+ .parent = &ahb_subsys_clk,
+ .rate = 104000000, /* this varies! */
+ .hw_ctrld = false,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
+ .res_mask = U300_SYSCON_RRR_EMIF_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_EMIF_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+ .get_rate = clk_get_rate_emif_clk,
+};
+
+
+/*
+ * Clocks on the FAST bridge
+ */
+static struct clk fast_clk = {
+ .name = "FAST_BRIDGE",
+ .parent = &amba_clk,
+ .rate = 13000000, /* this varies! */
+ .hw_ctrld = true,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+ .res_mask = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE,
+ .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+static struct clk mmcsd_clk = {
+ .name = "MCLK",
+ .parent = &fast_clk,
+ .rate = 18900000, /* this varies! */
+ .hw_ctrld = false,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+ .res_mask = U300_SYSCON_RFR_MMC_RESET_ENABLE,
+ .clk_val = U300_SYSCON_SBCER_MMC_CLK_EN,
+ .get_rate = clk_get_rate_mclk,
+ .set_rate = clk_set_rate_mclk,
+ .round_rate = clk_round_rate_mclk,
+ .disable = syscon_clk_disable,
+ .enable = syscon_clk_enable,
+};
+
+static struct clk i2s0_clk = {
+ .name = "i2s0",
+ .parent = &fast_clk,
+ .rate = 26000000, /* this varies! */
+ .hw_ctrld = true,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+ .res_mask = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE,
+ .clk_val = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+ .get_rate = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk i2s1_clk = {
+ .name = "i2s1",
+ .parent = &fast_clk,
+ .rate = 26000000, /* this varies! */
+ .hw_ctrld = true,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+ .res_mask = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE,
+ .clk_val = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+ .get_rate = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk i2c0_clk = {
+ .name = "I2C0",
+ .parent = &fast_clk,
+ .rate = 26000000, /* this varies! */
+ .hw_ctrld = false,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+ .res_mask = U300_SYSCON_RFR_I2C0_RESET_ENABLE,
+ .clk_val = U300_SYSCON_SBCER_I2C0_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+ .get_rate = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk i2c1_clk = {
+ .name = "I2C1",
+ .parent = &fast_clk,
+ .rate = 26000000, /* this varies! */
+ .hw_ctrld = false,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+ .res_mask = U300_SYSCON_RFR_I2C1_RESET_ENABLE,
+ .clk_val = U300_SYSCON_SBCER_I2C1_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+ .get_rate = clk_get_rate_i2s_i2c_spi,
+};
+
+static struct clk spi_clk = {
+ .name = "SPI",
+ .parent = &fast_clk,
+ .rate = 26000000, /* this varies! */
+ .hw_ctrld = false,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+ .res_mask = U300_SYSCON_RFR_SPI_RESET_ENABLE,
+ .clk_val = U300_SYSCON_SBCER_SPI_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+ .get_rate = clk_get_rate_i2s_i2c_spi,
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+static struct clk uart1_clk = {
+ .name = "UART1",
+ .parent = &fast_clk,
+ .rate = 13000000,
+ .hw_ctrld = false,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
+ .res_mask = U300_SYSCON_RFR_UART1_RESET_ENABLE,
+ .clk_val = U300_SYSCON_SBCER_UART1_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+#endif
+
+
+/*
+ * Clocks on the SLOW bridge
+ */
+static struct clk slow_clk = {
+ .name = "SLOW_BRIDGE",
+ .parent = &amba_clk,
+ .rate = 13000000,
+ .hw_ctrld = true,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+ .res_mask = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+/* TODO: implement SYSCON clock? */
+
+static struct clk wdog_clk = {
+ .name = "WDOG",
+ .parent = &slow_clk,
+ .hw_ctrld = false,
+ .rate = 32768,
+ .reset = false,
+ /* This is always on, cannot be enabled/disabled or reset */
+};
+
+/* This one is hardwired to PLL13 */
+static struct clk uart_clk = {
+ .name = "UARTCLK",
+ .parent = &slow_clk,
+ .rate = 13000000,
+ .hw_ctrld = false,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+ .res_mask = U300_SYSCON_RSR_UART_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_UART_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+static struct clk keypad_clk = {
+ .name = "KEYPAD",
+ .parent = &slow_clk,
+ .rate = 32768,
+ .hw_ctrld = false,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+ .res_mask = U300_SYSCON_RSR_KEYPAD_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+static struct clk gpio_clk = {
+ .name = "GPIO",
+ .parent = &slow_clk,
+ .rate = 13000000,
+ .hw_ctrld = true,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+ .res_mask = U300_SYSCON_RSR_GPIO_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+static struct clk rtc_clk = {
+ .name = "RTC",
+ .parent = &slow_clk,
+ .rate = 32768,
+ .hw_ctrld = true,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+ .res_mask = U300_SYSCON_RSR_RTC_RESET_EN,
+ /* This clock is always on, cannot be enabled/disabled */
+};
+
+static struct clk bustr_clk = {
+ .name = "BUSTR",
+ .parent = &slow_clk,
+ .rate = 13000000,
+ .hw_ctrld = true,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+ .res_mask = U300_SYSCON_RSR_BTR_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_BTR_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+static struct clk evhist_clk = {
+ .name = "EVHIST",
+ .parent = &slow_clk,
+ .rate = 13000000,
+ .hw_ctrld = true,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+ .res_mask = U300_SYSCON_RSR_EH_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_EH_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+static struct clk timer_clk = {
+ .name = "TIMER",
+ .parent = &slow_clk,
+ .rate = 13000000,
+ .hw_ctrld = true,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+ .res_mask = U300_SYSCON_RSR_ACC_TMR_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+static struct clk app_timer_clk = {
+ .name = "TIMER_APP",
+ .parent = &slow_clk,
+ .rate = 13000000,
+ .hw_ctrld = true,
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+ .res_mask = U300_SYSCON_RSR_APP_TMR_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+static struct clk ppm_clk = {
+ .name = "PPM",
+ .parent = &slow_clk,
+ .rate = 0, /* FIXME */
+ .hw_ctrld = true, /* TODO: Look up if it is hw ctrld or not */
+ .reset = true,
+ .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
+ .res_mask = U300_SYSCON_RSR_PPM_RESET_EN,
+ .clk_val = U300_SYSCON_SBCER_PPM_CLK_EN,
+ .enable = syscon_clk_enable,
+ .disable = syscon_clk_disable,
+};
+#endif
+
+#define DEF_LOOKUP(devid, clkref) \
+ { \
+ .dev_id = devid, \
+ .clk = clkref, \
+ }
+
+/*
+ * Here we only define clocks that are meaningful to
+ * look up through clockdevice.
+ */
+static struct clk_lookup lookups[] = {
+ /* Connected directly to the AMBA bus */
+ DEF_LOOKUP("amba", &amba_clk),
+ DEF_LOOKUP("cpu", &cpu_clk),
+ DEF_LOOKUP("nandif", &nandif_clk),
+ DEF_LOOKUP("semi", &semi_clk),
+#ifdef CONFIG_MACH_U300_BS335
+ DEF_LOOKUP("isp", &isp_clk),
+ DEF_LOOKUP("cds", &cds_clk),
+#endif
+ DEF_LOOKUP("dma", &dma_clk),
+ DEF_LOOKUP("aaif", &aaif_clk),
+ DEF_LOOKUP("apex", &apex_clk),
+ DEF_LOOKUP("video_enc", &video_enc_clk),
+ DEF_LOOKUP("xgam", &xgam_clk),
+ DEF_LOOKUP("ahb", &ahb_clk),
+ /* AHB bridge clocks */
+ DEF_LOOKUP("ahb", &ahb_subsys_clk),
+ DEF_LOOKUP("intcon", &intcon_clk),
+ DEF_LOOKUP("mspro", &mspro_clk),
+ DEF_LOOKUP("pl172", &emif_clk),
+ /* FAST bridge clocks */
+ DEF_LOOKUP("fast", &fast_clk),
+ DEF_LOOKUP("mmci", &mmcsd_clk),
+ /*
+ * The .0 and .1 identifiers on these comes from the platform device
+ * .id field and are assigned when the platform devices are registered.
+ */
+ DEF_LOOKUP("i2s.0", &i2s0_clk),
+ DEF_LOOKUP("i2s.1", &i2s1_clk),
+ DEF_LOOKUP("stddci2c.0", &i2c0_clk),
+ DEF_LOOKUP("stddci2c.1", &i2c1_clk),
+ DEF_LOOKUP("pl022", &spi_clk),
+#ifdef CONFIG_MACH_U300_BS335
+ DEF_LOOKUP("uart1", &uart1_clk),
+#endif
+ /* SLOW bridge clocks */
+ DEF_LOOKUP("slow", &slow_clk),
+ DEF_LOOKUP("wdog", &wdog_clk),
+ DEF_LOOKUP("uart0", &uart_clk),
+ DEF_LOOKUP("apptimer", &app_timer_clk),
+ DEF_LOOKUP("keypad", &keypad_clk),
+ DEF_LOOKUP("u300-gpio", &gpio_clk),
+ DEF_LOOKUP("rtc0", &rtc_clk),
+ DEF_LOOKUP("bustr", &bustr_clk),
+ DEF_LOOKUP("evhist", &evhist_clk),
+ DEF_LOOKUP("timer", &timer_clk),
+#ifdef CONFIG_MACH_U300_BS335
+ DEF_LOOKUP("ppm", &ppm_clk),
+#endif
+};
+
+static void __init clk_register(void)
+{
+ int i;
+
+ /* Register the lookups */
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+}
+
+/*
+ * These are the clocks for cells registered as primecell drivers
+ * on the AMBA bus. These must be on during AMBA device registration
+ * since the bus probe will attempt to read magic configuration
+ * registers for these devices. If they are deactivated these probes
+ * will fail.
+ *
+ *
+ * Please note that on emif, both RAM and NAND is connected in dual
+ * RAM phones. On single RAM phones, ram is on semi and NAND on emif.
+ *
+ */
+void u300_clock_primecells(void)
+{
+ clk_enable(&intcon_clk);
+ clk_enable(&uart_clk);
+#ifdef CONFIG_MACH_U300_BS335
+ clk_enable(&uart1_clk);
+#endif
+ clk_enable(&spi_clk);
+
+ clk_enable(&mmcsd_clk);
+
+}
+EXPORT_SYMBOL(u300_clock_primecells);
+
+void u300_unclock_primecells(void)
+{
+
+ clk_disable(&intcon_clk);
+ clk_disable(&uart_clk);
+#ifdef CONFIG_MACH_U300_BS335
+ clk_disable(&uart1_clk);
+#endif
+ clk_disable(&spi_clk);
+ clk_disable(&mmcsd_clk);
+
+}
+EXPORT_SYMBOL(u300_unclock_primecells);
+
+/*
+ * The interrupt controller is enabled before the clock API is registered.
+ */
+void u300_enable_intcon_clock(void)
+{
+ clk_enable(&intcon_clk);
+}
+EXPORT_SYMBOL(u300_enable_intcon_clock);
+
+/*
+ * The timer is enabled before the clock API is registered.
+ */
+void u300_enable_timer_clock(void)
+{
+ clk_enable(&app_timer_clk);
+}
+EXPORT_SYMBOL(u300_enable_timer_clock);
+
+#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
+/*
+ * The following makes it possible to view the status (especially
+ * reference count and reset status) for the clocks in the platform
+ * by looking into the special file <debugfs>/u300_clocks
+ */
+
+/* A list of all clocks in the platform */
+static struct clk *clks[] = {
+ /* Top node clock for the AMBA bus */
+ &amba_clk,
+ /* Connected directly to the AMBA bus */
+ &cpu_clk,
+ &nandif_clk,
+ &semi_clk,
+#ifdef CONFIG_MACH_U300_BS335
+ &isp_clk,
+ &cds_clk,
+#endif
+ &dma_clk,
+ &aaif_clk,
+ &apex_clk,
+ &video_enc_clk,
+ &xgam_clk,
+ &ahb_clk,
+
+ /* AHB bridge clocks */
+ &ahb_subsys_clk,
+ &intcon_clk,
+ &mspro_clk,
+ &emif_clk,
+ /* FAST bridge clocks */
+ &fast_clk,
+ &mmcsd_clk,
+ &i2s0_clk,
+ &i2s1_clk,
+ &i2c0_clk,
+ &i2c1_clk,
+ &spi_clk,
+#ifdef CONFIG_MACH_U300_BS335
+ &uart1_clk,
+#endif
+ /* SLOW bridge clocks */
+ &slow_clk,
+ &wdog_clk,
+ &uart_clk,
+ &app_timer_clk,
+ &keypad_clk,
+ &gpio_clk,
+ &rtc_clk,
+ &bustr_clk,
+ &evhist_clk,
+ &timer_clk,
+#ifdef CONFIG_MACH_U300_BS335
+ &ppm_clk,
+#endif
+};
+
+static int u300_clocks_show(struct seq_file *s, void *data)
+{
+ struct clk *clk;
+ int i;
+
+ seq_printf(s, "CLOCK DEVICE RESET STATE\t" \
+ "ACTIVE\tUSERS\tHW CTRL FREQ\n");
+ seq_printf(s, "---------------------------------------------" \
+ "-----------------------------------------\n");
+ for (i = 0; i < ARRAY_SIZE(clks); i++) {
+ clk = clks[i];
+ if (clk != ERR_PTR(-ENOENT)) {
+ /* Format clock and device name nicely */
+ char cdp[33];
+ int chars;
+
+ chars = snprintf(&cdp[0], 17, "%s", clk->name);
+ while (chars < 16) {
+ cdp[chars] = ' ';
+ chars++;
+ }
+ chars = snprintf(&cdp[16], 17, "%s", clk->dev ?
+ dev_name(clk->dev) : "N/A");
+ while (chars < 16) {
+ cdp[chars+16] = ' ';
+ chars++;
+ }
+ cdp[32] = '\0';
+ if (clk->get_rate)
+ seq_printf(s,
+ "%s%s\t%s\t%d\t%s\t%lu Hz\n",
+ &cdp[0],
+ clk->reset ?
+ "ASSERTED" : "RELEASED",
+ clk->usecount ? "ON" : "OFF",
+ clk->usecount,
+ clk->hw_ctrld ? "YES" : "NO ",
+ clk->get_rate(clk));
+ else
+ seq_printf(s,
+ "%s%s\t%s\t%d\t%s\t" \
+ "(unknown rate)\n",
+ &cdp[0],
+ clk->reset ?
+ "ASSERTED" : "RELEASED",
+ clk->usecount ? "ON" : "OFF",
+ clk->usecount,
+ clk->hw_ctrld ? "YES" : "NO ");
+ }
+ }
+ return 0;
+}
+
+static int u300_clocks_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, u300_clocks_show, NULL);
+}
+
+static const struct file_operations u300_clocks_operations = {
+ .open = u300_clocks_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void init_clk_read_procfs(void)
+{
+ /* Expose a simple debugfs interface to view all clocks */
+ (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
+ NULL, NULL, &u300_clocks_operations);
+}
+#else
+static inline void init_clk_read_procfs(void)
+{
+}
+#endif
+
+static int __init u300_clock_init(void)
+{
+ u16 val;
+
+ /*
+ * FIXME: shall all this powermanagement stuff really live here???
+ */
+
+ /* Set system to run at PLL208, max performance, a known state. */
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ /* Wait for the PLL208 to lock if not locked in yet */
+ while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
+ U300_SYSCON_CSR_PLL208_LOCK_IND));
+
+ /* Power management enable */
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+ val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+
+ clk_register();
+
+ init_clk_read_procfs();
+
+ /*
+ * Some of these may be on when we boot the system so make sure they
+ * are turned OFF.
+ */
+ syscon_block_reset_enable(&timer_clk);
+ timer_clk.disable(&timer_clk);
+
+ /*
+ * These shall be turned on by default when we boot the system
+ * so make sure they are ON. (Adding CPU here is a bit too much.)
+ * These clocks will be claimed by drivers later.
+ */
+ syscon_block_reset_disable(&semi_clk);
+ syscon_block_reset_disable(&emif_clk);
+ semi_clk.enable(&semi_clk);
+ emif_clk.enable(&emif_clk);
+
+ return 0;
+}
+/* initialize clocking early to be available later in the boot */
+core_initcall(u300_clock_init);
diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h
new file mode 100644
index 0000000..fc6d9cc
--- /dev/null
+++ b/arch/arm/mach-u300/clock.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-u300/include/mach/clock.h
+ *
+ * Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Adopted to ST-Ericsson U300 platforms by
+ * Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __MACH_CLOCK_H
+#define __MACH_CLOCK_H
+
+#include <linux/clk.h>
+
+struct clk {
+ struct list_head node;
+ struct module *owner;
+ struct device *dev;
+ const char *name;
+ struct clk *parent;
+
+ spinlock_t lock;
+ unsigned long rate;
+ bool reset;
+ __u16 clk_val;
+ __s8 usecount;
+ __u32 res_reg;
+ __u16 res_mask;
+
+ bool hw_ctrld;
+
+ void (*recalc) (struct clk *);
+ int (*set_rate) (struct clk *, unsigned long);
+ unsigned long (*get_rate) (struct clk *);
+ unsigned long (*round_rate) (struct clk *, unsigned long);
+ void (*init) (struct clk *);
+ void (*enable) (struct clk *);
+ void (*disable) (struct clk *);
+};
+
+void u300_clock_primecells(void);
+void u300_unclock_primecells(void);
+void u300_enable_intcon_clock(void);
+void u300_enable_timer_clock(void);
+
+#endif
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
new file mode 100644
index 0000000..89b3ccf
--- /dev/null
+++ b/arch/arm/mach-u300/core.c
@@ -0,0 +1,649 @@
+/*
+ *
+ * arch/arm/mach-u300/core.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Core platform support, IRQ handling and device definitions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/termios.h>
+#include <linux/amba/bus.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+#include "clock.h"
+#include "mmc.h"
+
+/*
+ * Static I/O mappings that are needed for booting the U300 platforms. The
+ * only things we need are the areas where we find the timer, syscon and
+ * intcon, since the remaining device drivers will map their own memory
+ * physical to virtual as the need arise.
+ */
+static struct map_desc u300_io_desc[] __initdata = {
+ {
+ .virtual = U300_SLOW_PER_VIRT_BASE,
+ .pfn = __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = U300_AHB_PER_VIRT_BASE,
+ .pfn = __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
+ .length = SZ_32K,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = U300_FAST_PER_VIRT_BASE,
+ .pfn = __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
+ .length = SZ_32K,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = 0xffff2000, /* TCM memory */
+ .pfn = __phys_to_pfn(0xffff2000),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ },
+
+ /*
+ * This overlaps with the IRQ vectors etc at 0xffff0000, so these
+ * may have to be moved to 0x00000000 in order to use the ROM.
+ */
+ /*
+ {
+ .virtual = U300_BOOTROM_VIRT_BASE,
+ .pfn = __phys_to_pfn(U300_BOOTROM_PHYS_BASE),
+ .length = SZ_64K,
+ .type = MT_ROM,
+ },
+ */
+};
+
+void __init u300_map_io(void)
+{
+ iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+}
+
+/*
+ * Declaration of devices found on the U300 board and
+ * their respective memory locations.
+ */
+static struct amba_device uart0_device = {
+ .dev = {
+ .init_name = "uart0", /* Slow device at 0x3000 offset */
+ .platform_data = NULL,
+ },
+ .res = {
+ .start = U300_UART0_BASE,
+ .end = U300_UART0_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = { IRQ_U300_UART0, NO_IRQ },
+};
+
+/* The U335 have an additional UART1 on the APP CPU */
+#ifdef CONFIG_MACH_U300_BS335
+static struct amba_device uart1_device = {
+ .dev = {
+ .init_name = "uart1", /* Fast device at 0x7000 offset */
+ .platform_data = NULL,
+ },
+ .res = {
+ .start = U300_UART1_BASE,
+ .end = U300_UART1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = { IRQ_U300_UART1, NO_IRQ },
+};
+#endif
+
+static struct amba_device pl172_device = {
+ .dev = {
+ .init_name = "pl172", /* AHB device at 0x4000 offset */
+ .platform_data = NULL,
+ },
+ .res = {
+ .start = U300_EMIF_CFG_BASE,
+ .end = U300_EMIF_CFG_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+
+/*
+ * Everything within this next ifdef deals with external devices connected to
+ * the APP SPI bus.
+ */
+static struct amba_device pl022_device = {
+ .dev = {
+ .coherent_dma_mask = ~0,
+ .init_name = "pl022", /* Fast device at 0x6000 offset */
+ },
+ .res = {
+ .start = U300_SPI_BASE,
+ .end = U300_SPI_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_U300_SPI, NO_IRQ },
+ /*
+ * This device has a DMA channel but the Linux driver does not use
+ * it currently.
+ */
+};
+
+static struct amba_device mmcsd_device = {
+ .dev = {
+ .init_name = "mmci", /* Fast device at 0x1000 offset */
+ .platform_data = NULL, /* Added later */
+ },
+ .res = {
+ .start = U300_MMCSD_BASE,
+ .end = U300_MMCSD_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
+ /*
+ * This device has a DMA channel but the Linux driver does not use
+ * it currently.
+ */
+};
+
+/*
+ * The order of device declaration may be important, since some devices
+ * have dependencies on other devices being initialized first.
+ */
+static struct amba_device *amba_devs[] __initdata = {
+ &uart0_device,
+#ifdef CONFIG_MACH_U300_BS335
+ &uart1_device,
+#endif
+ &pl022_device,
+ &pl172_device,
+ &mmcsd_device,
+};
+
+/* Here follows a list of all hw resources that the platform devices
+ * allocate. Note, clock dependencies are not included
+ */
+
+static struct resource gpio_resources[] = {
+ {
+ .start = U300_GPIO_BASE,
+ .end = (U300_GPIO_BASE + SZ_4K - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "gpio0",
+ .start = IRQ_U300_GPIO_PORT0,
+ .end = IRQ_U300_GPIO_PORT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "gpio1",
+ .start = IRQ_U300_GPIO_PORT1,
+ .end = IRQ_U300_GPIO_PORT1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "gpio2",
+ .start = IRQ_U300_GPIO_PORT2,
+ .end = IRQ_U300_GPIO_PORT2,
+ .flags = IORESOURCE_IRQ,
+ },
+#ifdef U300_COH901571_3
+ {
+ .name = "gpio3",
+ .start = IRQ_U300_GPIO_PORT3,
+ .end = IRQ_U300_GPIO_PORT3,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "gpio4",
+ .start = IRQ_U300_GPIO_PORT4,
+ .end = IRQ_U300_GPIO_PORT4,
+ .flags = IORESOURCE_IRQ,
+ },
+#ifdef CONFIG_MACH_U300_BS335
+ {
+ .name = "gpio5",
+ .start = IRQ_U300_GPIO_PORT5,
+ .end = IRQ_U300_GPIO_PORT5,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "gpio6",
+ .start = IRQ_U300_GPIO_PORT6,
+ .end = IRQ_U300_GPIO_PORT6,
+ .flags = IORESOURCE_IRQ,
+ },
+#endif /* CONFIG_MACH_U300_BS335 */
+#endif /* U300_COH901571_3 */
+};
+
+static struct resource keypad_resources[] = {
+ {
+ .start = U300_KEYPAD_BASE,
+ .end = U300_KEYPAD_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "coh901461-press",
+ .start = IRQ_U300_KEYPAD_KEYBF,
+ .end = IRQ_U300_KEYPAD_KEYBF,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "coh901461-release",
+ .start = IRQ_U300_KEYPAD_KEYBR,
+ .end = IRQ_U300_KEYPAD_KEYBR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource rtc_resources[] = {
+ {
+ .start = U300_RTC_BASE,
+ .end = U300_RTC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_U300_RTC,
+ .end = IRQ_U300_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/*
+ * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2)
+ * but these are not yet used by the driver.
+ */
+static struct resource fsmc_resources[] = {
+ {
+ .start = U300_NAND_IF_PHYS_BASE,
+ .end = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource i2c0_resources[] = {
+ {
+ .start = U300_I2C0_BASE,
+ .end = U300_I2C0_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_U300_I2C0,
+ .end = IRQ_U300_I2C0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource i2c1_resources[] = {
+ {
+ .start = U300_I2C1_BASE,
+ .end = U300_I2C1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_U300_I2C1,
+ .end = IRQ_U300_I2C1,
+ .flags = IORESOURCE_IRQ,
+ },
+
+};
+
+static struct resource wdog_resources[] = {
+ {
+ .start = U300_WDOG_BASE,
+ .end = U300_WDOG_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_U300_WDOG,
+ .end = IRQ_U300_WDOG,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+/* TODO: These should be protected by suitable #ifdef's */
+static struct resource ave_resources[] = {
+ {
+ .name = "AVE3e I/O Area",
+ .start = U300_VIDEOENC_BASE,
+ .end = U300_VIDEOENC_BASE + SZ_512K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "AVE3e IRQ0",
+ .start = IRQ_U300_VIDEO_ENC_0,
+ .end = IRQ_U300_VIDEO_ENC_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "AVE3e IRQ1",
+ .start = IRQ_U300_VIDEO_ENC_1,
+ .end = IRQ_U300_VIDEO_ENC_1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "AVE3e Physmem Area",
+ .start = 0, /* 0 will be remapped to reserved memory */
+ .end = SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * The AVE3e requires two regions of 256MB that it considers
+ * "invisible". The hardware will not be able to access these
+ * adresses, so they should never point to system RAM.
+ */
+ {
+ .name = "AVE3e Reserved 0",
+ .start = 0xd0000000,
+ .end = 0xd0000000 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "AVE3e Reserved 1",
+ .start = 0xe0000000,
+ .end = 0xe0000000 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device wdog_device = {
+ .name = "wdog",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(wdog_resources),
+ .resource = wdog_resources,
+};
+
+static struct platform_device i2c0_device = {
+ .name = "stddci2c",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(i2c0_resources),
+ .resource = i2c0_resources,
+};
+
+static struct platform_device i2c1_device = {
+ .name = "stddci2c",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(i2c1_resources),
+ .resource = i2c1_resources,
+};
+
+static struct platform_device gpio_device = {
+ .name = "u300-gpio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(gpio_resources),
+ .resource = gpio_resources,
+};
+
+static struct platform_device keypad_device = {
+ .name = "keypad",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(keypad_resources),
+ .resource = keypad_resources,
+};
+
+static struct platform_device rtc_device = {
+ .name = "rtc0",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resource = rtc_resources,
+};
+
+static struct platform_device fsmc_device = {
+ .name = "nandif",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(fsmc_resources),
+ .resource = fsmc_resources,
+};
+
+static struct platform_device ave_device = {
+ .name = "video_enc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ave_resources),
+ .resource = ave_resources,
+};
+
+/*
+ * Notice that AMBA devices are initialized before platform devices.
+ *
+ */
+static struct platform_device *platform_devs[] __initdata = {
+ &i2c0_device,
+ &i2c1_device,
+ &keypad_device,
+ &rtc_device,
+ &gpio_device,
+ &fsmc_device,
+ &wdog_device,
+ &ave_device
+};
+
+
+/*
+ * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
+ * together so some interrupts are connected to the first one and some
+ * to the second one.
+ */
+void __init u300_init_irq(void)
+{
+ u32 mask[2] = {0, 0};
+ int i;
+
+ for (i = 0; i < NR_IRQS; i++)
+ set_bit(i, (unsigned long *) &mask[0]);
+ u300_enable_intcon_clock();
+ vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
+ vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
+}
+
+
+/*
+ * U300 platforms peripheral handling
+ */
+struct db_chip {
+ u16 chipid;
+ const char *name;
+};
+
+/*
+ * This is a list of the Digital Baseband chips used in the U300 platform.
+ */
+static struct db_chip db_chips[] __initdata = {
+ {
+ .chipid = 0xb800,
+ .name = "DB3000",
+ },
+ {
+ .chipid = 0xc000,
+ .name = "DB3100",
+ },
+ {
+ .chipid = 0xc800,
+ .name = "DB3150",
+ },
+ {
+ .chipid = 0xd800,
+ .name = "DB3200",
+ },
+ {
+ .chipid = 0xe000,
+ .name = "DB3250",
+ },
+ {
+ .chipid = 0xe800,
+ .name = "DB3210",
+ },
+ {
+ .chipid = 0xf000,
+ .name = "DB3350 P1x",
+ },
+ {
+ .chipid = 0xf100,
+ .name = "DB3350 P2x",
+ },
+ {
+ .chipid = 0x0000, /* List terminator */
+ .name = NULL,
+ }
+};
+
+static void u300_init_check_chip(void)
+{
+
+ u16 val;
+ struct db_chip *chip;
+ const char *chipname;
+ const char unknown[] = "UNKNOWN";
+
+ /* Read out and print chip ID */
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR);
+ /* This is in funky bigendian order... */
+ val = (val & 0xFFU) << 8 | (val >> 8);
+ chip = db_chips;
+ chipname = unknown;
+
+ for ( ; chip->chipid; chip++) {
+ if (chip->chipid == (val & 0xFF00U)) {
+ chipname = chip->name;
+ break;
+ }
+ }
+ printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
+ "(chip ID 0x%04x)\n", chipname, val);
+
+#ifdef CONFIG_MACH_U300_BS26
+ if ((val & 0xFF00U) != 0xc800) {
+ printk(KERN_ERR "Platform configured for BS25/BS26 " \
+ "with DB3150 but %s detected, expect problems!",
+ chipname);
+ }
+#endif
+#ifdef CONFIG_MACH_U300_BS330
+ if ((val & 0xFF00U) != 0xd800) {
+ printk(KERN_ERR "Platform configured for BS330 " \
+ "with DB3200 but %s detected, expect problems!",
+ chipname);
+ }
+#endif
+#ifdef CONFIG_MACH_U300_BS335
+ if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
+ printk(KERN_ERR "Platform configured for BS365 " \
+ " with DB3350 but %s detected, expect problems!",
+ chipname);
+ }
+#endif
+#ifdef CONFIG_MACH_U300_BS365
+ if ((val & 0xFF00U) != 0xe800) {
+ printk(KERN_ERR "Platform configured for BS365 " \
+ "with DB3210 but %s detected, expect problems!",
+ chipname);
+ }
+#endif
+
+
+}
+
+/*
+ * Some devices and their resources require reserved physical memory from
+ * the end of the available RAM. This function traverses the list of devices
+ * and assigns actual adresses to these.
+ */
+static void __init u300_assign_physmem(void)
+{
+ unsigned long curr_start = __pa(high_memory);
+ int i, j;
+
+ for (i = 0; i < ARRAY_SIZE(platform_devs); i++) {
+ for (j = 0; j < platform_devs[i]->num_resources; j++) {
+ struct resource *const res =
+ &platform_devs[i]->resource[j];
+
+ if (IORESOURCE_MEM == res->flags &&
+ 0 == res->start) {
+ res->start = curr_start;
+ res->end += curr_start;
+ curr_start += (res->end - res->start + 1);
+
+ printk(KERN_INFO "core.c: Mapping RAM " \
+ "%#x-%#x to device %s:%s\n",
+ res->start, res->end,
+ platform_devs[i]->name, res->name);
+ }
+ }
+ }
+}
+
+void __init u300_init_devices(void)
+{
+ int i;
+ u16 val;
+
+ /* Check what platform we run and print some status information */
+ u300_init_check_chip();
+
+ /* Set system to run at PLL208, max performance, a known state. */
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ /* Wait for the PLL208 to lock if not locked in yet */
+ while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
+ U300_SYSCON_CSR_PLL208_LOCK_IND));
+
+ /* Register the AMBA devices in the AMBA bus abstraction layer */
+ u300_clock_primecells();
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+ u300_unclock_primecells();
+
+ u300_assign_physmem();
+
+ /* Register the platform devices */
+ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
+#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED
+ /*
+ * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when
+ * both subsystems are requesting this mode.
+ * If we not share the Acc SDRAM, this is never the case. Therefore
+ * enable it here from the App side.
+ */
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
+ U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
+#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */
+}
+
+static int core_module_init(void)
+{
+ /*
+ * This needs to be initialized later: it needs the input framework
+ * to be initialized first.
+ */
+ return mmc_init(&mmcsd_device);
+}
+module_init(core_module_init);
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
new file mode 100644
index 0000000..308cdb1
--- /dev/null
+++ b/arch/arm/mach-u300/gpio.c
@@ -0,0 +1,703 @@
+/*
+ *
+ * arch/arm/mach-u300/gpio.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 GPIO module.
+ * This can driver either of the two basic GPIO cores
+ * available in the U300 platforms:
+ * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
+ * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
+ * Notice that you also have inline macros in <asm-arch/gpio.h>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+/* Need access to SYSCON registers for PADmuxing */
+#include <mach/syscon.h>
+
+#include "padmux.h"
+
+/* Reference to GPIO block clock */
+static struct clk *clk;
+
+/* Memory resource */
+static struct resource *memres;
+static void __iomem *virtbase;
+static struct device *gpiodev;
+
+struct u300_gpio_port {
+ const char *name;
+ int irq;
+ int number;
+};
+
+
+static struct u300_gpio_port gpio_ports[] = {
+ {
+ .name = "gpio0",
+ .number = 0,
+ },
+ {
+ .name = "gpio1",
+ .number = 1,
+ },
+ {
+ .name = "gpio2",
+ .number = 2,
+ },
+#ifdef U300_COH901571_3
+ {
+ .name = "gpio3",
+ .number = 3,
+ },
+ {
+ .name = "gpio4",
+ .number = 4,
+ },
+#ifdef CONFIG_MACH_U300_BS335
+ {
+ .name = "gpio5",
+ .number = 5,
+ },
+ {
+ .name = "gpio6",
+ .number = 6,
+ },
+#endif
+#endif
+
+};
+
+
+#ifdef U300_COH901571_3
+
+/* Default input value */
+#define DEFAULT_OUTPUT_LOW 0
+#define DEFAULT_OUTPUT_HIGH 1
+
+/* GPIO Pull-Up status */
+#define DISABLE_PULL_UP 0
+#define ENABLE_PULL_UP 1
+
+#define GPIO_NOT_USED 0
+#define GPIO_IN 1
+#define GPIO_OUT 2
+
+struct u300_gpio_configuration_data {
+ unsigned char pin_usage;
+ unsigned char default_output_value;
+ unsigned char pull_up;
+};
+
+/* Initial configuration */
+const struct u300_gpio_configuration_data
+u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
+#ifdef CONFIG_MACH_U300_BS335
+ /* Port 0, pins 0-7 */
+ {
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ },
+ /* Port 1, pins 0-7 */
+ {
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ },
+ /* Port 2, pins 0-7 */
+ {
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ },
+ /* Port 3, pins 0-7 */
+ {
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ },
+ /* Port 4, pins 0-7 */
+ {
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ },
+ /* Port 5, pins 0-7 */
+ {
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ },
+ /* Port 6, pind 0-7 */
+ {
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ }
+#endif
+
+#ifdef CONFIG_MACH_U300_BS365
+ /* Port 0, pins 0-7 */
+ {
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ },
+ /* Port 1, pins 0-7 */
+ {
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}
+ },
+ /* Port 2, pins 0-7 */
+ {
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ },
+ /* Port 3, pins 0-7 */
+ {
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ },
+ /* Port 4, pins 0-7 */
+ {
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ /* These 4 pins doesn't exist on DB3210 */
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP},
+ {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}
+ }
+#endif
+};
+#endif
+
+
+/* No users == we can power down GPIO */
+static int gpio_users;
+
+struct gpio_struct {
+ int (*callback)(void *);
+ void *data;
+ int users;
+};
+
+static struct gpio_struct gpio_pin[U300_GPIO_MAX];
+
+/*
+ * Let drivers register callback in order to get notified when there is
+ * an interrupt on the gpio pin
+ */
+int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
+{
+ if (gpio_pin[gpio].callback)
+ dev_warn(gpiodev, "%s: WARNING: callback already "
+ "registered for gpio pin#%d\n", __func__, gpio);
+ gpio_pin[gpio].callback = func;
+ gpio_pin[gpio].data = data;
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_register_callback);
+
+int gpio_unregister_callback(unsigned gpio)
+{
+ if (!gpio_pin[gpio].callback)
+ dev_warn(gpiodev, "%s: WARNING: callback already "
+ "unregistered for gpio pin#%d\n", __func__, gpio);
+ gpio_pin[gpio].callback = NULL;
+ gpio_pin[gpio].data = NULL;
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_unregister_callback);
+
+int gpio_request(unsigned gpio, const char *label)
+{
+ if (gpio_pin[gpio].users)
+ return -EINVAL;
+ else
+ gpio_pin[gpio].users++;
+
+ gpio_users++;
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+ gpio_users--;
+ gpio_pin[gpio].users--;
+ if (unlikely(gpio_pin[gpio].users < 0)) {
+ dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
+ gpio);
+ gpio_pin[gpio].users = 0;
+ }
+
+ return;
+}
+EXPORT_SYMBOL(gpio_free);
+
+/* This returns zero or nonzero */
+int gpio_get_value(unsigned gpio)
+{
+ return readl(virtbase + U300_GPIO_PXPDIR +
+ PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+/*
+ * We hope that the compiler will optimize away the unused branch
+ * in case "value" is a constant
+ */
+void gpio_set_value(unsigned gpio, int value)
+{
+ u32 val;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (value) {
+ /* set */
+ val = readl(virtbase + U300_GPIO_PXPDOR +
+ PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
+ & (1 << (gpio & 0x07));
+ writel(val | (1 << (gpio & 0x07)), virtbase +
+ U300_GPIO_PXPDOR +
+ PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+ } else {
+ /* clear */
+ val = readl(virtbase + U300_GPIO_PXPDOR +
+ PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
+ & (1 << (gpio & 0x07));
+ writel(val & ~(1 << (gpio & 0x07)), virtbase +
+ U300_GPIO_PXPDOR +
+ PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+ }
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+int gpio_direction_input(unsigned gpio)
+{
+ unsigned long flags;
+ u32 val;
+
+ if (gpio > U300_GPIO_MAX)
+ return -EINVAL;
+
+ local_irq_save(flags);
+ val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+ U300_GPIO_PORTX_SPACING);
+ /* Mask out this pin*/
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+ /* This is not needed since it sets the bits to zero.*/
+ /* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
+ writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+ U300_GPIO_PORTX_SPACING);
+ local_irq_restore(flags);
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+ unsigned long flags;
+ u32 val;
+
+ if (gpio > U300_GPIO_MAX)
+ return -EINVAL;
+
+ local_irq_save(flags);
+ val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+ U300_GPIO_PORTX_SPACING);
+ /* Mask out this pin */
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+ /*
+ * FIXME: configure for push/pull, open drain or open source per pin
+ * in setup. The current driver will only support push/pull.
+ */
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+ << ((gpio & 0x07) << 1));
+ writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
+ U300_GPIO_PORTX_SPACING);
+ gpio_set_value(gpio, value);
+ local_irq_restore(flags);
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+/*
+ * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
+ */
+void enable_irq_on_gpio_pin(unsigned gpio, int edge)
+{
+ u32 val;
+ unsigned long flags;
+ local_irq_save(flags);
+
+ val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+ U300_GPIO_PORTX_SPACING);
+ val |= (1 << (gpio & 0x07));
+ writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+ U300_GPIO_PORTX_SPACING);
+ val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
+ U300_GPIO_PORTX_SPACING);
+ if (edge)
+ val |= (1 << (gpio & 0x07));
+ else
+ val &= ~(1 << (gpio & 0x07));
+ writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
+ U300_GPIO_PORTX_SPACING);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(enable_irq_on_gpio_pin);
+
+void disable_irq_on_gpio_pin(unsigned gpio)
+{
+ u32 val;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+ U300_GPIO_PORTX_SPACING);
+ val &= ~(1 << (gpio & 0x07));
+ writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
+ U300_GPIO_PORTX_SPACING);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(disable_irq_on_gpio_pin);
+
+/* Enable (value == 0) or disable (value == 1) internal pullup */
+void gpio_pullup(unsigned gpio, int value)
+{
+ u32 val;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (value) {
+ val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
+ U300_GPIO_PORTX_SPACING);
+ writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
+ PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+ } else {
+ val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
+ U300_GPIO_PORTX_SPACING);
+ writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
+ PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+ }
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_pullup);
+
+static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
+{
+ struct u300_gpio_port *port = dev_id;
+ u32 val;
+ int pin;
+
+ /* Read event register */
+ val = readl(virtbase + U300_GPIO_PXIEV + port->number *
+ U300_GPIO_PORTX_SPACING);
+ /* Mask with enable register */
+ val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
+ U300_GPIO_PORTX_SPACING);
+ /* Mask relevant bits */
+ val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
+ /* ACK IRQ (clear event) */
+ writel(val, virtbase + U300_GPIO_PXIEV + port->number *
+ U300_GPIO_PORTX_SPACING);
+ /* Print message */
+ while (val != 0) {
+ unsigned gpio;
+
+ pin = __ffs(val);
+ /* mask off this pin */
+ val &= ~(1 << pin);
+ gpio = (port->number << 3) + pin;
+
+ if (gpio_pin[gpio].callback)
+ (void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
+ else
+ dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
+ gpio);
+ }
+ return IRQ_HANDLED;
+}
+
+static void gpio_set_initial_values(void)
+{
+#ifdef U300_COH901571_3
+ int i, j;
+ unsigned long flags;
+ u32 val;
+
+ /* Write default values to all pins */
+ for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
+ val = 0;
+ for (j = 0; j < 8; j++)
+ val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
+ local_irq_save(flags);
+ writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
+ local_irq_restore(flags);
+ }
+
+ /*
+ * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
+ * to output and 'GPIO_IN' to input for each port. And initalize
+ * default value on outputs.
+ */
+ for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
+ for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
+ local_irq_save(flags);
+ val = readl(virtbase + U300_GPIO_PXPCR +
+ i * U300_GPIO_PORTX_SPACING);
+ /* Mask out this pin */
+ val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
+
+ if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
+ val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
+ writel(val, virtbase + U300_GPIO_PXPCR +
+ i * U300_GPIO_PORTX_SPACING);
+ local_irq_restore(flags);
+ }
+ }
+
+ /* Enable or disable the internal pull-ups in the GPIO ASIC block */
+ for (i = 0; i < U300_GPIO_MAX; i++) {
+ val = 0;
+ for (j = 0; j < 8; j++)
+ val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP)) << j;
+ local_irq_save(flags);
+ writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
+ local_irq_restore(flags);
+ }
+#endif
+}
+
+static int __init gpio_probe(struct platform_device *pdev)
+{
+ u32 val;
+ int err = 0;
+ int i;
+ int num_irqs;
+
+ gpiodev = &pdev->dev;
+ memset(gpio_pin, 0, sizeof(gpio_pin));
+
+ /* Get GPIO clock */
+ clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ err = PTR_ERR(clk);
+ dev_err(gpiodev, "could not get GPIO clock\n");
+ goto err_no_clk;
+ }
+ err = clk_enable(clk);
+ if (err) {
+ dev_err(gpiodev, "could not enable GPIO clock\n");
+ goto err_no_clk_enable;
+ }
+
+ memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!memres)
+ goto err_no_resource;
+
+ if (request_mem_region(memres->start, memres->end - memres->start, "GPIO Controller")
+ == NULL) {
+ err = -ENODEV;
+ goto err_no_ioregion;
+ }
+
+ virtbase = ioremap(memres->start, resource_size(memres));
+ if (!virtbase) {
+ err = -ENOMEM;
+ goto err_no_ioremap;
+ }
+ dev_info(gpiodev, "remapped 0x%08x to %p\n",
+ memres->start, virtbase);
+
+#ifdef U300_COH901335
+ dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
+ /* Turn on the GPIO block */
+ writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
+#endif
+
+#ifdef U300_COH901571_3
+ dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
+ val = readl(virtbase + U300_GPIO_CR);
+ dev_info(gpiodev, "COH901571/3 block version: %d, " \
+ "number of cores: %d\n",
+ ((val & 0x0000FE00) >> 9),
+ ((val & 0x000001FC) >> 2));
+ writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
+#endif
+
+ /* Set up some padmuxing here */
+#ifdef CONFIG_MMC
+ pmx_set_mission_mode_mmc();
+#endif
+#ifdef CONFIG_SPI_PL022
+ pmx_set_mission_mode_spi();
+#endif
+
+ gpio_set_initial_values();
+
+ for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
+
+ gpio_ports[num_irqs].irq =
+ platform_get_irq_byname(pdev,
+ gpio_ports[num_irqs].name);
+
+ err = request_irq(gpio_ports[num_irqs].irq,
+ gpio_irq_handler, IRQF_DISABLED,
+ gpio_ports[num_irqs].name,
+ &gpio_ports[num_irqs]);
+ if (err) {
+ dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
+ gpio_ports[num_irqs].name);
+ goto err_no_irq;
+ }
+ /* Turns off PortX_irq_force */
+ writel(0x0, virtbase + U300_GPIO_PXIFR +
+ num_irqs * U300_GPIO_PORTX_SPACING);
+ }
+
+ return 0;
+
+ err_no_irq:
+ for (i = 0; i < num_irqs; i++)
+ free_irq(gpio_ports[i].irq, &gpio_ports[i]);
+ iounmap(virtbase);
+ err_no_ioremap:
+ release_mem_region(memres->start, memres->end - memres->start);
+ err_no_ioregion:
+ err_no_resource:
+ clk_disable(clk);
+ err_no_clk_enable:
+ clk_put(clk);
+ err_no_clk:
+ dev_info(gpiodev, "module ERROR:%d\n", err);
+ return err;
+}
+
+static int __exit gpio_remove(struct platform_device *pdev)
+{
+ int i;
+
+ /* Turn off the GPIO block */
+ writel(0x00000000U, virtbase + U300_GPIO_CR);
+ for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
+ free_irq(gpio_ports[i].irq, &gpio_ports[i]);
+ iounmap(virtbase);
+ release_mem_region(memres->start, memres->end - memres->start);
+ clk_disable(clk);
+ clk_put(clk);
+ return 0;
+}
+
+static struct platform_driver gpio_driver = {
+ .driver = {
+ .name = "u300-gpio",
+ },
+ .remove = __exit_p(gpio_remove),
+};
+
+
+static int __init u300_gpio_init(void)
+{
+ return platform_driver_probe(&gpio_driver, gpio_probe);
+}
+
+static void __exit u300_gpio_exit(void)
+{
+ platform_driver_unregister(&gpio_driver);
+}
+
+arch_initcall(u300_gpio_init);
+module_exit(u300_gpio_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+
+#ifdef U300_COH901571_3
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
+#endif
+
+#ifdef U300_COH901335
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
+#endif
+
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-u300/include/mach/clkdev.h b/arch/arm/mach-u300/include/mach/clkdev.h
new file mode 100644
index 0000000..92e3cc8
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+int __clk_get(struct clk *clk);
+void __clk_put(struct clk *clk);
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
new file mode 100644
index 0000000..f3a1cbb
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ *
+ * arch-arm/mach-u300/include/mach/debug-macro.S
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Debugging macro include header.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+
+ .macro addruart,rx
+ /* If we move the adress using MMU, use this. */
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
+ ldrne \rx, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
+ orr \rx, \rx, #0x00003000
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S
new file mode 100644
index 0000000..20731ae
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ *
+ * arch-arm/mach-u300/include/mach/entry-macro.S
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level IRQ helper macros for ST-Ericsson U300
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON0_BASE
+ ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
+ mov \irqnr, #0
+ teq \irqstat, #0
+ bne 1002f
+1001: ldr \base, = U300_AHB_PER_VIRT_BASE-U300_AHB_PER_PHYS_BASE+U300_INTCON1_BASE
+ ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status
+ mov \irqnr, #32
+ teq \irqstat, #0
+ beq 1003f
+1002: tst \irqstat, #1
+ bne 1003f
+ add \irqnr, \irqnr, #1
+ movs \irqstat, \irqstat, lsr #1
+ bne 1002b
+1003: /* EQ will be set if no irqs pending */
+ .endm
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
new file mode 100644
index 0000000..c817412
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -0,0 +1,290 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/gpio.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * GPIO block resgister definitions and inline macros for
+ * U300 GPIO COH 901 335 or COH 901 571/3
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_GPIO_H
+#define __MACH_U300_GPIO_H
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+/* Switch type depending on platform/chip variant */
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+#define U300_COH901335
+#endif
+#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
+#define U300_COH901571_3
+#endif
+
+/* Get base address for regs here */
+#include "u300-regs.h"
+/* IRQ numbers */
+#include "irqs.h"
+
+/*
+ * This is the GPIO block definitions. GPIO (General Purpose I/O) can be
+ * used for anything, and often is. The event/enable etc figures are for
+ * the lowermost pin (pin 0 on each port), shift this left to match your
+ * pin if you're gonna use these values.
+ */
+#ifdef U300_COH901335
+#define U300_GPIO_PORTX_SPACING (0x1C)
+/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
+#define U300_GPIO_PXPDIR (0x00)
+#define U300_GPIO_PXPDOR (0x00)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_GPIO_PXPCR (0x04)
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_GPIO_PXIEV (0x08)
+#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
+#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_GPIO_PXIEN (0x0C)
+#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
+#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_GPIO_PXIFR (0x10)
+#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
+#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_GPIO_PXICR (0x14)
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_GPIO_PXPER (0x18)
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
+/* Control Register 32bit (R/W) */
+#define U300_GPIO_CR (0x54)
+#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
+/* three ports of 8 bits each = GPIO pins 0..23 */
+#define U300_GPIO_NUM_PORTS 3
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
+#endif
+
+#ifdef U300_COH901571_3
+/*
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2 (mask 0x000001FC) contains the core version ID.
+ */
+#define U300_GPIO_CR (0x00)
+#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL)
+#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
+#define U300_GPIO_PORTX_SPACING (0x30)
+/* Port X Pin Data INPUT Register 32bit (R/W) */
+#define U300_GPIO_PXPDIR (0x04)
+/* Port X Pin Data OUTPUT Register 32bit (R/W) */
+#define U300_GPIO_PXPDOR (0x08)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_GPIO_PXPCR (0x0C)
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_GPIO_PXPER (0x10)
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_GPIO_PXIEV (0x14)
+#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
+#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_GPIO_PXIEN (0x18)
+#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
+#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_GPIO_PXIFR (0x1C)
+#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
+#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_GPIO_PXICR (0x20)
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
+#ifdef CONFIG_MACH_U300_BS335
+/* seven ports of 8 bits each = GPIO pins 0..55 */
+#define U300_GPIO_NUM_PORTS 7
+#else
+/* five ports of 8 bits each = GPIO pins 0..39 */
+#define U300_GPIO_NUM_PORTS 5
+#endif
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
+#endif
+
+/*
+ * Individual pin assignments for the B26/S26. Notice that the
+ * actual usage of these pins depends on the PAD MUX settings, that
+ * is why the same number can potentially appear several times.
+ * In the reference design each pin is only used for one purpose.
+ * These were determined by inspecting the B26/S26 schematic:
+ * 2/1911-ROA 128 1603
+ */
+#ifdef CONFIG_MACH_U300_BS2X
+#define U300_GPIO_PIN_UART_RX 0
+#define U300_GPIO_PIN_UART_TX 1
+#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
+#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
+#define U300_GPIO_PIN_CAM_SLEEP 4
+#define U300_GPIO_PIN_CAM_REG_EN 5
+#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
+#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
+#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
+#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
+#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
+#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
+#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
+#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
+#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
+#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
+#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
+#endif
+
+/*
+ * Individual pin assignments for the B330/S330 and B365/S365.
+ * Notice that the actual usage of these pins depends on the
+ * PAD MUX settings, that is why the same number can potentially
+ * appear several times. In the reference design each pin is only
+ * used for one purpose. These were determined by inspecting the
+ * S365 schematic.
+ */
+#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
+ defined(CONFIG_MACH_U300_BS335)
+#define U300_GPIO_PIN_UART_RX 0
+#define U300_GPIO_PIN_UART_TX 1
+#define U300_GPIO_PIN_UART_CTS 2
+#define U300_GPIO_PIN_UART_RTS 3
+#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
+#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
+#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
+#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
+
+#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
+#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
+#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
+#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
+#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
+#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
+#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
+#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
+#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
+#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
+#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
+#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
+#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
+#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
+#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
+#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
+#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
+#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
+#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
+#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
+#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
+#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
+#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
+#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
+
+#ifdef CONFIG_MACH_U300_BS335
+
+#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
+#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
+#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
+#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
+#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
+#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
+#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
+#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
+#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
+#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
+#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
+#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
+#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
+#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
+#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
+#endif
+
+#endif
+
+/* translates a pin number to a port number */
+#define PIN_TO_PORT(val) (val >> 3)
+
+/* These can be found in arch/arm/mach-u300/gpio.c */
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+extern int gpio_register_callback(unsigned gpio,
+ int (*func)(void *arg),
+ void *);
+extern int gpio_unregister_callback(unsigned gpio);
+extern void enable_irq_on_gpio_pin(unsigned gpio, int edge);
+extern void disable_irq_on_gpio_pin(unsigned gpio);
+extern void gpio_pullup(unsigned gpio, int value);
+extern int gpio_get_value(unsigned gpio);
+extern void gpio_set_value(unsigned gpio, int value);
+
+/* wrappers to sleep-enable the previous two functions */
+static inline unsigned gpio_to_irq(unsigned gpio)
+{
+ return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0;
+}
+
+static inline unsigned irq_to_gpio(unsigned irq)
+{
+ /*
+ * FIXME: This is no 1-1 mapping at all, it points to the
+ * whole block of 8 pins.
+ */
+ return (irq - IRQ_U300_GPIO_PORT0) << 3;
+}
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/hardware.h b/arch/arm/mach-u300/include/mach/hardware.h
new file mode 100644
index 0000000..b99d4ce
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/hardware.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-u300/include/mach/hardware.h
+ */
+#include <asm/sizes.h>
+#include <mach/u300-regs.h>
diff --git a/arch/arm/mach-u300/include/mach/io.h b/arch/arm/mach-u300/include/mach/io.h
new file mode 100644
index 0000000..5d6b4c1
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/io.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Dummy IO map for being able to use writew()/readw(),
+ * writel()/readw() and similar accessor functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
new file mode 100644
index 0000000..a6867b1
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -0,0 +1,114 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/irqs.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * IRQ channel definitions for the U300 platforms.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define IRQ_U300_INTCON0_START 0
+#define IRQ_U300_INTCON1_START 32
+/* These are on INTCON0 - 30 lines */
+#define IRQ_U300_IRQ0_EXT 0
+#define IRQ_U300_IRQ1_EXT 1
+#define IRQ_U300_DMA 2
+#define IRQ_U300_VIDEO_ENC_0 3
+#define IRQ_U300_VIDEO_ENC_1 4
+#define IRQ_U300_AAIF_RX 5
+#define IRQ_U300_AAIF_TX 6
+#define IRQ_U300_AAIF_VGPIO 7
+#define IRQ_U300_AAIF_WAKEUP 8
+#define IRQ_U300_PCM_I2S0_FRAME 9
+#define IRQ_U300_PCM_I2S0_FIFO 10
+#define IRQ_U300_PCM_I2S1_FRAME 11
+#define IRQ_U300_PCM_I2S1_FIFO 12
+#define IRQ_U300_XGAM_GAMCON 13
+#define IRQ_U300_XGAM_CDI 14
+#define IRQ_U300_XGAM_CDICON 15
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+/* MMIACC not used on the DB3210 or DB3350 chips */
+#define IRQ_U300_XGAM_MMIACC 16
+#endif
+#define IRQ_U300_XGAM_PDI 17
+#define IRQ_U300_XGAM_PDICON 18
+#define IRQ_U300_XGAM_GAMEACC 19
+#define IRQ_U300_XGAM_MCIDCT 20
+#define IRQ_U300_APEX 21
+#define IRQ_U300_UART0 22
+#define IRQ_U300_SPI 23
+#define IRQ_U300_TIMER_APP_OS 24
+#define IRQ_U300_TIMER_APP_DD 25
+#define IRQ_U300_TIMER_APP_GP1 26
+#define IRQ_U300_TIMER_APP_GP2 27
+#define IRQ_U300_TIMER_OS 28
+#define IRQ_U300_TIMER_MS 29
+#define IRQ_U300_KEYPAD_KEYBF 30
+#define IRQ_U300_KEYPAD_KEYBR 31
+/* These are on INTCON1 - 32 lines */
+#define IRQ_U300_GPIO_PORT0 32
+#define IRQ_U300_GPIO_PORT1 33
+#define IRQ_U300_GPIO_PORT2 34
+
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
+ defined(CONFIG_MACH_U300_BS335)
+/* These are for DB3150, DB3200 and DB3350 */
+#define IRQ_U300_WDOG 35
+#define IRQ_U300_EVHIST 36
+#define IRQ_U300_MSPRO 37
+#define IRQ_U300_MMCSD_MCIINTR0 38
+#define IRQ_U300_MMCSD_MCIINTR1 39
+#define IRQ_U300_I2C0 40
+#define IRQ_U300_I2C1 41
+#define IRQ_U300_RTC 42
+#define IRQ_U300_NFIF 43
+#define IRQ_U300_NFIF2 44
+#endif
+
+/* DB3150 and DB3200 have only 45 IRQs */
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+#define U300_NR_IRQS 45
+#endif
+
+/* The DB3350-specific interrupt lines */
+#ifdef CONFIG_MACH_U300_BS335
+#define IRQ_U300_ISP_F0 45
+#define IRQ_U300_ISP_F1 46
+#define IRQ_U300_ISP_F2 47
+#define IRQ_U300_ISP_F3 48
+#define IRQ_U300_ISP_F4 49
+#define IRQ_U300_GPIO_PORT3 50
+#define IRQ_U300_SYSCON_PLL_LOCK 51
+#define IRQ_U300_UART1 52
+#define IRQ_U300_GPIO_PORT4 53
+#define IRQ_U300_GPIO_PORT5 54
+#define IRQ_U300_GPIO_PORT6 55
+#define U300_NR_IRQS 56
+#endif
+
+/* The DB3210-specific interrupt lines */
+#ifdef CONFIG_MACH_U300_BS365
+#define IRQ_U300_GPIO_PORT3 35
+#define IRQ_U300_GPIO_PORT4 36
+#define IRQ_U300_WDOG 37
+#define IRQ_U300_EVHIST 38
+#define IRQ_U300_MSPRO 39
+#define IRQ_U300_MMCSD_MCIINTR0 40
+#define IRQ_U300_MMCSD_MCIINTR1 41
+#define IRQ_U300_I2C0 42
+#define IRQ_U300_I2C1 43
+#define IRQ_U300_RTC 44
+#define IRQ_U300_NFIF 45
+#define IRQ_U300_NFIF2 46
+#define IRQ_U300_SYSCON_PLL_LOCK 47
+#define U300_NR_IRQS 48
+#endif
+
+#define NR_IRQS U300_NR_IRQS
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
new file mode 100644
index 0000000..bf134bc
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -0,0 +1,42 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/memory.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Memory virtual/physical mapping constants.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+
+#ifdef CONFIG_MACH_U300_DUAL_RAM
+
+#define PHYS_OFFSET UL(0x48000000)
+#define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100)
+
+#else
+
+#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
+#define PHYS_OFFSET (0x28000000 + \
+ (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
+ (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#else
+#define PHYS_OFFSET (0x28000000 + \
+ (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
+ (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#endif
+#define BOOT_PARAMS_OFFSET (0x28000000 + \
+ (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
+ (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
+#endif
+
+/*
+ * We enable a real big DMA buffer if need be.
+ */
+#define CONSISTENT_DMA_SIZE SZ_4M
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h
new file mode 100644
index 0000000..77d9210
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/platform.h
@@ -0,0 +1,19 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/platform.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Basic platform init and mapping functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __ASSEMBLY__
+
+void u300_map_io(void);
+void u300_init_irq(void);
+void u300_init_devices(void);
+extern struct sys_timer u300_timer;
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
new file mode 100644
index 0000000..1c90d1b
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/syscon.h
@@ -0,0 +1,644 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/syscon.h
+ *
+ *
+ * Copyright (C) 2008 ST-Ericsson AB
+ *
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+
+#ifndef __MACH_SYSCON_H
+#define __MACH_SYSCON_H
+
+/*
+ * All register defines for SYSCON registers that concerns individual
+ * block clocks and reset lines are registered here. This is because
+ * we don't want any other file to try to fool around with this stuff.
+ */
+
+/* APP side SYSCON registers */
+/* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */
+/* CLK Control Register 16bit (R/W) */
+#define U300_SYSCON_CCR (0x0000)
+#define U300_SYSCON_CCR_I2S1_USE_VCXO (0x0040)
+#define U300_SYSCON_CCR_I2S0_USE_VCXO (0x0020)
+#define U300_SYSCON_CCR_TURN_VCXO_ON (0x0008)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK (0x0007)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER (0x04)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW (0x03)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE (0x02)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH (0x01)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST (0x00)
+/* CLK Status Register 16bit (R/W) */
+#define U300_SYSCON_CSR (0x0004)
+#define U300_SYSCON_CSR_PLL208_LOCK_IND (0x0002)
+#define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001)
+/* Reset lines for SLOW devices 16bit (R/W) */
+#define U300_SYSCON_RSR (0x0014)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_RSR_PPM_RESET_EN (0x0200)
+#endif
+#define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100)
+#define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080)
+#define U300_SYSCON_RSR_RTC_RESET_EN (0x0040)
+#define U300_SYSCON_RSR_KEYPAD_RESET_EN (0x0020)
+#define U300_SYSCON_RSR_GPIO_RESET_EN (0x0010)
+#define U300_SYSCON_RSR_EH_RESET_EN (0x0008)
+#define U300_SYSCON_RSR_BTR_RESET_EN (0x0004)
+#define U300_SYSCON_RSR_UART_RESET_EN (0x0002)
+#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001)
+/* Reset lines for FAST devices 16bit (R/W) */
+#define U300_SYSCON_RFR (0x0018)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080)
+#endif
+#define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040)
+#define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020)
+#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010)
+#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE (0x0008)
+#define U300_SYSCON_RFR_I2C1_RESET_ENABLE (0x0004)
+#define U300_SYSCON_RFR_I2C0_RESET_ENABLE (0x0002)
+#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001)
+/* Reset lines for the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_RRR (0x001c)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_RRR_CDS_RESET_EN (0x4000)
+#define U300_SYSCON_RRR_ISP_RESET_EN (0x2000)
+#endif
+#define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000)
+#define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800)
+#define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100)
+#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN (0x0080)
+#define U300_SYSCON_RRR_NANDIF_RESET_EN (0x0040)
+#define U300_SYSCON_RRR_EMIF_RESET_EN (0x0020)
+#define U300_SYSCON_RRR_DMAC_RESET_EN (0x0010)
+#define U300_SYSCON_RRR_CPU_RESET_EN (0x0008)
+#define U300_SYSCON_RRR_APEX_RESET_EN (0x0004)
+#define U300_SYSCON_RRR_AHB_RESET_EN (0x0002)
+#define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001)
+/* Clock enable for SLOW peripherals 16bit (R/W) */
+#define U300_SYSCON_CESR (0x0020)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CESR_PPM_CLK_EN (0x0200)
+#endif
+#define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100)
+#define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080)
+#define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040)
+#define U300_SYSCON_CESR_GPIO_CLK_EN (0x0010)
+#define U300_SYSCON_CESR_EH_CLK_EN (0x0008)
+#define U300_SYSCON_CESR_BTR_CLK_EN (0x0004)
+#define U300_SYSCON_CESR_UART_CLK_EN (0x0002)
+#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001)
+/* Clock enable for FAST peripherals 16bit (R/W) */
+#define U300_SYSCON_CEFR (0x0024)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200)
+#endif
+#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100)
+#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080)
+#define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040)
+#define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020)
+#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010)
+#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008)
+#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004)
+#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002)
+#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001)
+/* Clock enable for the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_CERR (0x0028)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CERR_CDS_CLK_EN (0x2000)
+#define U300_SYSCON_CERR_ISP_CLK_EN (0x1000)
+#endif
+#define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800)
+#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400)
+#define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200)
+#define U300_SYSCON_CERR_XGAM_CLK_EN (0x0100)
+#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN (0x0080)
+#define U300_SYSCON_CERR_NANDIF_CLK_EN (0x0040)
+#define U300_SYSCON_CERR_EMIF_CLK_EN (0x0020)
+#define U300_SYSCON_CERR_DMAC_CLK_EN (0x0010)
+#define U300_SYSCON_CERR_CPU_CLK_EN (0x0008)
+#define U300_SYSCON_CERR_APEX_CLK_EN (0x0004)
+#define U300_SYSCON_CERR_AHB_CLK_EN (0x0002)
+#define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001)
+/* Single block clock enable 16bit (-/W) */
+#define U300_SYSCON_SBCER (0x002c)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009)
+#endif
+#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008)
+#define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007)
+#define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006)
+#define U300_SYSCON_SBCER_GPIO_CLK_EN (0x0004)
+#define U300_SYSCON_SBCER_EH_CLK_EN (0x0003)
+#define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002)
+#define U300_SYSCON_SBCER_UART_CLK_EN (0x0001)
+#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019)
+#endif
+#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018)
+#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017)
+#define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016)
+#define U300_SYSCON_SBCER_MMC_CLK_EN (0x0015)
+#define U300_SYSCON_SBCER_I2S1_CLK_EN (0x0014)
+#define U300_SYSCON_SBCER_I2S0_CLK_EN (0x0013)
+#define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012)
+#define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011)
+#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D)
+#define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C)
+#endif
+#define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B)
+#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A)
+#define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029)
+#define U300_SYSCON_SBCER_XGAM_CLK_EN (0x0028)
+#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN (0x0027)
+#define U300_SYSCON_SBCER_NANDIF_CLK_EN (0x0026)
+#define U300_SYSCON_SBCER_EMIF_CLK_EN (0x0025)
+#define U300_SYSCON_SBCER_DMAC_CLK_EN (0x0024)
+#define U300_SYSCON_SBCER_CPU_CLK_EN (0x0023)
+#define U300_SYSCON_SBCER_APEX_CLK_EN (0x0022)
+#define U300_SYSCON_SBCER_AHB_CLK_EN (0x0021)
+#define U300_SYSCON_SBCER_AAIF_CLK_EN (0x0020)
+/* Single block clock disable 16bit (-/W) */
+#define U300_SYSCON_SBCDR (0x0030)
+/* Same values as above for SBCER */
+/* Clock force SLOW peripherals 16bit (R/W) */
+#define U300_SYSCON_CFSR (0x003c)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200)
+#endif
+#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100)
+#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080)
+#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020)
+#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN (0x0010)
+#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN (0x0008)
+#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN (0x0004)
+#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN (0x0002)
+#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN (0x0001)
+/* Clock force FAST peripherals 16bit (R/W) */
+#define U300_SYSCON_CFFR (0x40)
+/* Values not defined. Define if you want to use them. */
+/* Clock force the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_CFRR (0x44)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000)
+#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000)
+#endif
+#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800)
+#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400)
+#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200)
+#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN (0x0100)
+#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN (0x0080)
+#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN (0x0040)
+#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN (0x0020)
+#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN (0x0010)
+#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN (0x0008)
+#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN (0x0004)
+#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN (0x0002)
+#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN (0x0001)
+/* PLL208 Frequency Control 16bit (R/W) */
+#define U300_SYSCON_PFCR (0x48)
+#define U300_SYSCON_PFCR_DPLL_MULT_NUM (0x000F)
+/* Power Management Control 16bit (R/W) */
+#define U300_SYSCON_PMCR (0x50)
+#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002)
+#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001)
+/*
+ * All other clocking registers moved to clock.c!
+ */
+/* Reset Out 16bit (R/W) */
+#define U300_SYSCON_RCR (0x6c)
+#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE (0x0001)
+/* EMIF Slew Rate Control 16bit (R/W) */
+#define U300_SYSCON_SRCLR (0x70)
+#define U300_SYSCON_SRCLR_MASK (0x03FF)
+#define U300_SYSCON_SRCLR_VALUE (0x03FF)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B (0x0200)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A (0x0100)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B (0x0080)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A (0x0040)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B (0x0020)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A (0x0010)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B (0x0008)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A (0x0004)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B (0x0002)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A (0x0001)
+/* EMIF Clock Control Register 16bit (R/W) */
+#define U300_SYSCON_ECCR (0x0078)
+#define U300_SYSCON_ECCR_MASK (0x000F)
+#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE (0x0008)
+#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004)
+#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002)
+#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001)
+/* PAD MUX Control register 1 (LOW) 16bit (R/W) */
+#define U300_SYSCON_PMC1LR (0x007C)
+#define U300_SYSCON_PMC1LR_MASK (0xFFFF)
+#define U300_SYSCON_PMC1LR_CDI_MASK (0xC000)
+#define U300_SYSCON_PMC1LR_CDI_CDI (0x0000)
+#define U300_SYSCON_PMC1LR_CDI_EMIF (0x4000)
+#define U300_SYSCON_PMC1LR_CDI_GPIO (0x8000)
+#define U300_SYSCON_PMC1LR_CDI_WCDMA (0xC000)
+#define U300_SYSCON_PMC1LR_PDI_MASK (0x3000)
+#define U300_SYSCON_PMC1LR_PDI_PDI (0x0000)
+#define U300_SYSCON_PMC1LR_PDI_EGG (0x1000)
+#define U300_SYSCON_PMC1LR_PDI_WCDMA (0x3000)
+#define U300_SYSCON_PMC1LR_MMCSD_MASK (0x0C00)
+#define U300_SYSCON_PMC1LR_MMCSD_MMCSD (0x0000)
+#define U300_SYSCON_PMC1LR_MMCSD_MSPRO (0x0400)
+#define U300_SYSCON_PMC1LR_MMCSD_DSP (0x0800)
+#define U300_SYSCON_PMC1LR_MMCSD_WCDMA (0x0C00)
+#define U300_SYSCON_PMC1LR_ETM_MASK (0x0300)
+#define U300_SYSCON_PMC1LR_ETM_ACC (0x0000)
+#define U300_SYSCON_PMC1LR_ETM_APP (0x0100)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK (0x00C0)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC (0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF (0x0040)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM (0x0080)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB (0x00C0)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK (0x0030)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC (0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF (0x0010)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM (0x0020)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI (0x0030)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK (0x000C)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC (0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF (0x0004)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM (0x0008)
+#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI (0x000C)
+#define U300_SYSCON_PMC1LR_EMIF_1_MASK (0x0003)
+#define U300_SYSCON_PMC1LR_EMIF_1_STATIC (0x0000)
+#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0 (0x0001)
+#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1 (0x0002)
+#define U300_SYSCON_PMC1LR_EMIF_1 (0x0003)
+/* PAD MUX Control register 2 (HIGH) 16bit (R/W) */
+#define U300_SYSCON_PMC1HR (0x007E)
+#define U300_SYSCON_PMC1HR_MASK (0xFFFF)
+#define U300_SYSCON_PMC1HR_MISC_2_MASK (0xC000)
+#define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC1HR_MISC_2_MSPRO (0x4000)
+#define U300_SYSCON_PMC1HR_MISC_2_DSP (0x8000)
+#define U300_SYSCON_PMC1HR_MISC_2_AAIF (0xC000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK (0x3000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF (0x1000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP (0x2000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF (0x3000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK (0x0C00)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC (0x0400)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP (0x0800)
+#define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF (0x0C00)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK (0x0300)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI (0x0100)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF (0x0300)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK (0x00C0)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI (0x0040)
+#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF (0x00C0)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_MASK (0x0030)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_SPI (0x0010)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_DSP (0x0020)
+#define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF (0x0030)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_MASK (0x000C)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_UART0 (0x0004)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS (0x0008)
+#define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF (0x000C)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_MASK (0x0003)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_UART0 (0x0001)
+#define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF (0x0003)
+/* Step one for killing the applications system 16bit (-/W) */
+#define U300_SYSCON_KA1R (0x0080)
+#define U300_SYSCON_KA1R_MASK (0xFFFF)
+#define U300_SYSCON_KA1R_VALUE (0xFFFF)
+/* Step two for killing the application system 16bit (-/W) */
+#define U300_SYSCON_KA2R (0x0084)
+#define U300_SYSCON_KA2R_MASK (0xFFFF)
+#define U300_SYSCON_KA2R_VALUE (0xFFFF)
+/* MMC/MSPRO frequency divider register 0 16bit (R/W) */
+#define U300_SYSCON_MMF0R (0x90)
+#define U300_SYSCON_MMF0R_MASK (0x00FF)
+#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK (0x00F0)
+#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK (0x000F)
+/* MMC/MSPRO frequency divider register 1 16bit (R/W) */
+#define U300_SYSCON_MMF1R (0x94)
+#define U300_SYSCON_MMF1R_MASK (0x00FF)
+#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK (0x00F0)
+#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK (0x000F)
+/* AAIF control register 16 bit (R/W) */
+#define U300_SYSCON_AAIFCR (0x98)
+#define U300_SYSCON_AAIFCR_MASK (0x0003)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_MASK (0x0003)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL (0x0000)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING (0x0001)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT (0x0002)
+#define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT (0x0003)
+/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
+#define U300_SYSCON_MMCR (0x9C)
+#define U300_SYSCON_MMCR_MASK (0x0003)
+#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002)
+#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001)
+
+/* TODO: More SYSCON registers missing */
+#define U300_SYSCON_PMC3R (0x10c)
+#define U300_SYSCON_PMC3R_APP_MISC_11_MASK (0xc000)
+#define U300_SYSCON_PMC3R_APP_MISC_11_SPI (0x4000)
+#define U300_SYSCON_PMC3R_APP_MISC_10_MASK (0x3000)
+#define U300_SYSCON_PMC3R_APP_MISC_10_SPI (0x1000)
+/* TODO: Missing other configs, I just added the SPI stuff */
+
+/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
+#define U300_SYSCON_S0CCR (0x120)
+#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF)
+#define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000)
+#define U300_SYSCON_S0CCR_CLOCK_INV (0x0200)
+#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0)
+#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E)
+#define U300_SYSCON_S0CCR_CLOCK_ENABLE (0x0001)
+#define U300_SYSCON_S0CCR_SEL_MCLK (0x8<<1)
+#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK (0xA<<1)
+#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK (0xC<<1)
+#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK (0xD<<1)
+#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK (0xE<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK (0x0<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK (0x2<<1)
+#define U300_SYSCON_S0CCR_SEL_RTC_CLK (0x4<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK (0x6<<1)
+/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
+#define U300_SYSCON_S1CCR (0x124)
+#define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF)
+#define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000)
+#define U300_SYSCON_S1CCR_CLOCK_INV (0x0200)
+#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0)
+#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E)
+#define U300_SYSCON_S1CCR_CLOCK_ENABLE (0x0001)
+#define U300_SYSCON_S1CCR_SEL_MCLK (0x8<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK (0xA<<1)
+#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK (0xC<<1)
+#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK (0xD<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK (0xE<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK (0x0<<1)
+#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK (0x2<<1)
+#define U300_SYSCON_S1CCR_SEL_RTC_CLK (0x4<<1)
+#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK (0x6<<1)
+/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */
+#define U300_SYSCON_S2CCR (0x128)
+#define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF)
+#define U300_SYSCON_S2CCR_CLK_STEAL (0x8000)
+#define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000)
+#define U300_SYSCON_S2CCR_CLOCK_INV (0x0200)
+#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0)
+#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E)
+#define U300_SYSCON_S2CCR_CLOCK_ENABLE (0x0001)
+#define U300_SYSCON_S2CCR_SEL_MCLK (0x8<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK (0xA<<1)
+#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK (0xC<<1)
+#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK (0xD<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK (0xE<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK (0x0<<1)
+#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK (0x2<<1)
+#define U300_SYSCON_S2CCR_SEL_RTC_CLK (0x4<<1)
+#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK (0x6<<1)
+/* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */
+#define U300_SYSCON_MCR (0x12c)
+#define U300_SYSCON_MCR_FIELD_MASK (0x00FF)
+#define U300_SYSCON_MCR_PMGEN_CR_4_MASK (0x00C0)
+#define U300_SYSCON_MCR_PMGEN_CR_4_GPIO (0x0000)
+#define U300_SYSCON_MCR_PMGEN_CR_4_SPI (0x0040)
+#define U300_SYSCON_MCR_PMGEN_CR_4_AAIF (0x00C0)
+#define U300_SYSCON_MCR_PMGEN_CR_2_MASK (0x0030)
+#define U300_SYSCON_MCR_PMGEN_CR_2_GPIO (0x0000)
+#define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC (0x0010)
+#define U300_SYSCON_MCR_PMGEN_CR_2_DSP (0x0020)
+#define U300_SYSCON_MCR_PMGEN_CR_2_AAIF (0x0030)
+#define U300_SYSCON_MCR_PMGEN_CR_0_MASK (0x000C)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1 (0x0000)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2 (0x0004)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3 (0x0008)
+#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM (0x000C)
+#define U300_SYSCON_MCR_PM1G_MODE_ENABLE (0x0002)
+#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE (0x0001)
+/* Clock activity observability register 0 */
+#define U300_SYSCON_C0OAR (0x140)
+#define U300_SYSCON_C0OAR_MASK (0xFFFF)
+#define U300_SYSCON_C0OAR_VALUE (0xFFFF)
+#define U300_SYSCON_C0OAR_BT_H_CLK (0x8000)
+#define U300_SYSCON_C0OAR_ASPB_P_CLK (0x4000)
+#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK (0x2000)
+#define U300_SYSCON_C0OAR_APP_SEMI_CLK (0x1000)
+#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK (0x0800)
+#define U300_SYSCON_C0OAR_APP_I2S1_CLK (0x0400)
+#define U300_SYSCON_C0OAR_APP_I2S0_CLK (0x0200)
+#define U300_SYSCON_C0OAR_APP_CPU_CLK (0x0100)
+#define U300_SYSCON_C0OAR_APP_52_CLK (0x0080)
+#define U300_SYSCON_C0OAR_APP_208_CLK (0x0040)
+#define U300_SYSCON_C0OAR_APP_104_CLK (0x0020)
+#define U300_SYSCON_C0OAR_APEX_CLK (0x0010)
+#define U300_SYSCON_C0OAR_AHPB_M_H_CLK (0x0008)
+#define U300_SYSCON_C0OAR_AHB_CLK (0x0004)
+#define U300_SYSCON_C0OAR_AFPB_P_CLK (0x0002)
+#define U300_SYSCON_C0OAR_AAIF_CLK (0x0001)
+/* Clock activity observability register 1 */
+#define U300_SYSCON_C1OAR (0x144)
+#define U300_SYSCON_C1OAR_MASK (0x3FFE)
+#define U300_SYSCON_C1OAR_VALUE (0x3FFE)
+#define U300_SYSCON_C1OAR_NFIF_F_CLK (0x2000)
+#define U300_SYSCON_C1OAR_MSPRO_CLK (0x1000)
+#define U300_SYSCON_C1OAR_MMC_P_CLK (0x0800)
+#define U300_SYSCON_C1OAR_MMC_CLK (0x0400)
+#define U300_SYSCON_C1OAR_KP_P_CLK (0x0200)
+#define U300_SYSCON_C1OAR_I2C1_P_CLK (0x0100)
+#define U300_SYSCON_C1OAR_I2C0_P_CLK (0x0080)
+#define U300_SYSCON_C1OAR_GPIO_CLK (0x0040)
+#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK (0x0020)
+#define U300_SYSCON_C1OAR_EMIF_H_CLK (0x0010)
+#define U300_SYSCON_C1OAR_EVHIST_CLK (0x0008)
+#define U300_SYSCON_C1OAR_PPM_CLK (0x0004)
+#define U300_SYSCON_C1OAR_DMA_CLK (0x0002)
+/* Clock activity observability register 2 */
+#define U300_SYSCON_C2OAR (0x148)
+#define U300_SYSCON_C2OAR_MASK (0x0FFF)
+#define U300_SYSCON_C2OAR_VALUE (0x0FFF)
+#define U300_SYSCON_C2OAR_XGAM_CDI_CLK (0x0800)
+#define U300_SYSCON_C2OAR_XGAM_CLK (0x0400)
+#define U300_SYSCON_C2OAR_VC_H_CLK (0x0200)
+#define U300_SYSCON_C2OAR_VC_CLK (0x0100)
+#define U300_SYSCON_C2OAR_UA_P_CLK (0x0080)
+#define U300_SYSCON_C2OAR_TMR1_CLK (0x0040)
+#define U300_SYSCON_C2OAR_TMR0_CLK (0x0020)
+#define U300_SYSCON_C2OAR_SPI_P_CLK (0x0010)
+#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK (0x0008)
+#define U300_SYSCON_C2OAR_PCM_I2S1_CLK (0x0004)
+#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK (0x0002)
+#define U300_SYSCON_C2OAR_PCM_I2S0_CLK (0x0001)
+
+/* Chip ID register 16bit (R/-) */
+#define U300_SYSCON_CIDR (0x400)
+/* Video IRQ clear 16bit (R/W) */
+#define U300_SYSCON_VICR (0x404)
+#define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE (0x0002)
+#define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE (0x0001)
+/* SMCR */
+#define U300_SYSCON_SMCR (0x4d0)
+#define U300_SYSCON_SMCR_FIELD_MASK (0x000e)
+#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008)
+#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004)
+#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002)
+/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
+#define U300_SYSCON_CSDR (0x4f0)
+#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001)
+/* PRINT_CONTROL Print Control 16bit (R/-) */
+#define U300_SYSCON_PCR (0x4f8)
+#define U300_SYSCON_PCR_SERV_IND (0x0001)
+/* BOOT_CONTROL 16bit (R/-) */
+#define U300_SYSCON_BCR (0x4fc)
+#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400)
+#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200)
+#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC)
+#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003)
+
+
+/* CPU clock defines */
+/**
+ * CPU high frequency in MHz
+ */
+#define SYSCON_CPU_CLOCK_HIGH 208
+/**
+ * CPU medium frequency in MHz
+ */
+#define SYSCON_CPU_CLOCK_MEDIUM 104
+/**
+ * CPU low frequency in MHz
+ */
+#define SYSCON_CPU_CLOCK_LOW 13
+
+/* EMIF clock defines */
+/**
+ * EMIF high frequency in MHz
+ */
+#define SYSCON_EMIF_CLOCK_HIGH 104
+/**
+ * EMIF medium frequency in MHz
+ */
+#define SYSCON_EMIF_CLOCK_MEDIUM 104
+/**
+ * EMIF low frequency in MHz
+ */
+#define SYSCON_EMIF_CLOCK_LOW 13
+
+/* AHB clock defines */
+/**
+ * AHB high frequency in MHz
+ */
+#define SYSCON_AHB_CLOCK_HIGH 52
+/**
+ * AHB medium frequency in MHz
+ */
+#define SYSCON_AHB_CLOCK_MEDIUM 52
+/**
+ * AHB low frequency in MHz
+ */
+#define SYSCON_AHB_CLOCK_LOW 7 /* i.e 13/2=6.5MHz */
+
+enum syscon_busmaster {
+ SYSCON_BM_DMAC,
+ SYSCON_BM_XGAM,
+ SYSCON_BM_VIDEO_ENC
+};
+
+/*
+ * Note that this array must match the order of the array "clk_reg"
+ * in syscon.c
+ */
+enum syscon_clk {
+ SYSCON_CLKCONTROL_SLOW_BRIDGE,
+ SYSCON_CLKCONTROL_UART,
+ SYSCON_CLKCONTROL_BTR,
+ SYSCON_CLKCONTROL_EH,
+ SYSCON_CLKCONTROL_GPIO,
+ SYSCON_CLKCONTROL_KEYPAD,
+ SYSCON_CLKCONTROL_APP_TIMER,
+ SYSCON_CLKCONTROL_ACC_TIMER,
+ SYSCON_CLKCONTROL_FAST_BRIDGE,
+ SYSCON_CLKCONTROL_I2C0,
+ SYSCON_CLKCONTROL_I2C1,
+ SYSCON_CLKCONTROL_I2S0,
+ SYSCON_CLKCONTROL_I2S1,
+ SYSCON_CLKCONTROL_MMC,
+ SYSCON_CLKCONTROL_SPI,
+ SYSCON_CLKCONTROL_I2S0_CORE,
+ SYSCON_CLKCONTROL_I2S1_CORE,
+ SYSCON_CLKCONTROL_AAIF,
+ SYSCON_CLKCONTROL_AHB,
+ SYSCON_CLKCONTROL_APEX,
+ SYSCON_CLKCONTROL_CPU,
+ SYSCON_CLKCONTROL_DMA,
+ SYSCON_CLKCONTROL_EMIF,
+ SYSCON_CLKCONTROL_NAND_IF,
+ SYSCON_CLKCONTROL_VIDEO_ENC,
+ SYSCON_CLKCONTROL_XGAM,
+ SYSCON_CLKCONTROL_SEMI,
+ SYSCON_CLKCONTROL_AHB_SUBSYS,
+ SYSCON_CLKCONTROL_MSPRO
+};
+
+enum syscon_sysclk_mode {
+ SYSCON_SYSCLK_DISABLED,
+ SYSCON_SYSCLK_M_CLK,
+ SYSCON_SYSCLK_ACC_FSM,
+ SYSCON_SYSCLK_PLL60_48,
+ SYSCON_SYSCLK_PLL60_60,
+ SYSCON_SYSCLK_ACC_PLL208,
+ SYSCON_SYSCLK_APP_PLL13,
+ SYSCON_SYSCLK_APP_FSM,
+ SYSCON_SYSCLK_RTC,
+ SYSCON_SYSCLK_APP_PLL208
+};
+
+enum syscon_sysclk_req {
+ SYSCON_SYSCLKREQ_DISABLED,
+ SYSCON_SYSCLKREQ_ACTIVE_LOW
+};
+
+enum syscon_clk_mode {
+ SYSCON_CLKMODE_OFF,
+ SYSCON_CLKMODE_DEFAULT,
+ SYSCON_CLKMODE_LOW,
+ SYSCON_CLKMODE_MEDIUM,
+ SYSCON_CLKMODE_HIGH,
+ SYSCON_CLKMODE_PERMANENT,
+ SYSCON_CLKMODE_ON,
+};
+
+enum syscon_call_mode {
+ SYSCON_CLKCALL_NOWAIT,
+ SYSCON_CLKCALL_WAIT,
+};
+
+int syscon_dc_on(bool keep_power_on);
+int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster,
+ bool active);
+bool syscon_get_busmaster_active_state(void);
+int syscon_set_sleep_mask(enum syscon_clk,
+ bool sleep_ctrl);
+int syscon_config_sysclk(u32 sysclk,
+ enum syscon_sysclk_mode sysclkmode,
+ bool inverse,
+ u32 divisor,
+ enum syscon_sysclk_req sysclkreq);
+bool syscon_can_turn_off_semi_clock(void);
+
+/* This function is restricted to core.c */
+int syscon_request_normal_power(bool req);
+
+/* This function is restricted to be used by platform_speed.c */
+int syscon_speed_request(enum syscon_call_mode wait_mode,
+ enum syscon_clk_mode req_clk_mode);
+#endif /* __MACH_SYSCON_H */
diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h
new file mode 100644
index 0000000..8daf136
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/system.h
@@ -0,0 +1,42 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/system.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * System shutdown and reset functions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <asm/hardware/vic.h>
+#include <asm/irq.h>
+
+/* Forward declare this function from the watchdog */
+void coh901327_watchdog_reset(void);
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+ switch (mode) {
+ case 's':
+ case 'h':
+ printk(KERN_CRIT "RESET: shutting down/rebooting system\n");
+ /* Disable interrupts */
+ local_irq_disable();
+#ifdef CONFIG_COH901327_WATCHDOG
+ coh901327_watchdog_reset();
+#endif
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ /* Wait for system do die/reset. */
+ while (1);
+}
diff --git a/arch/arm/mach-u300/include/mach/timex.h b/arch/arm/mach-u300/include/mach/timex.h
new file mode 100644
index 0000000..f233b72
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/timex.h
@@ -0,0 +1,17 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/timex.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Platform tick rate definition.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+/* This is for the APP OS GP1 (General Purpose 1) timer */
+#define CLOCK_TICK_RATE 1000000
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
new file mode 100644
index 0000000..88333df
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -0,0 +1,187 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/u300-regs.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Basic register address definitions in physical memory and
+ * some block defintions for core devices like the timer.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_REGS_H
+#define __MACH_U300_REGS_H
+
+/*
+ * These are the large blocks of memory allocated for I/O.
+ * the defines are used for setting up the I/O memory mapping.
+ */
+
+/* NAND Flash CS0 */
+#define U300_NAND_CS0_PHYS_BASE 0x80000000
+#define U300_NAND_CS0_VIRT_BASE 0xff040000
+
+/* NFIF */
+#define U300_NAND_IF_PHYS_BASE 0x9f800000
+#define U300_NAND_IF_VIRT_BASE 0xff030000
+
+/* AHB Peripherals */
+#define U300_AHB_PER_PHYS_BASE 0xa0000000
+#define U300_AHB_PER_VIRT_BASE 0xff010000
+
+/* FAST Peripherals */
+#define U300_FAST_PER_PHYS_BASE 0xc0000000
+#define U300_FAST_PER_VIRT_BASE 0xff020000
+
+/* SLOW Peripherals */
+#define U300_SLOW_PER_PHYS_BASE 0xc0010000
+#define U300_SLOW_PER_VIRT_BASE 0xff000000
+
+/* Boot ROM */
+#define U300_BOOTROM_PHYS_BASE 0xffff0000
+#define U300_BOOTROM_VIRT_BASE 0xffff0000
+
+/* SEMI config base */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SEMI_CONFIG_BASE 0x2FFE0000
+#else
+#define U300_SEMI_CONFIG_BASE 0x30000000
+#endif
+
+/*
+ * All the following peripherals are specified at their PHYSICAL address,
+ * so if you need to access them (in the kernel), you MUST use the macros
+ * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST()
+ * etc.
+ */
+
+/*
+ * AHB peripherals
+ */
+
+/* AHB Peripherals Bridge Controller */
+#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000)
+
+/* Vectored Interrupt Controller 0, servicing 32 interrupts */
+#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000)
+#define U300_INTCON0_VBASE (U300_AHB_PER_VIRT_BASE+0x1000)
+
+/* Vectored Interrupt Controller 1, servicing 32 interrupts */
+#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000)
+#define U300_INTCON1_VBASE (U300_AHB_PER_VIRT_BASE+0x2000)
+
+/* Memory Stick Pro (MSPRO) controller */
+#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000)
+
+/* EMIF Configuration Area */
+#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000)
+
+
+/*
+ * FAST peripherals
+ */
+
+/* FAST bridge control */
+#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000)
+
+/* MMC/SD controller */
+#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000)
+
+/* PCM I2S0 controller */
+#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000)
+
+/* PCM I2S1 controller */
+#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000)
+
+/* I2C0 controller */
+#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000)
+
+/* I2C1 controller */
+#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000)
+
+/* SPI controller */
+#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000)
+
+#ifdef CONFIG_MACH_U300_BS335
+/* Fast UART1 on U335 only */
+#define U300_UART1_BASE (U300_SLOW_PER_PHYS_BASE+0x7000)
+#endif
+
+/*
+ * SLOW peripherals
+ */
+
+/* SLOW bridge control */
+#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE)
+
+/* SYSCON */
+#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000)
+#define U300_SYSCON_VBASE (U300_SLOW_PER_VIRT_BASE+0x1000)
+
+/* Watchdog */
+#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000)
+
+/* UART0 */
+#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000)
+
+/* APP side special timer */
+#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000)
+#define U300_TIMER_APP_VBASE (U300_SLOW_PER_VIRT_BASE+0x4000)
+
+/* Keypad */
+#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000)
+
+/* GPIO */
+#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000)
+
+/* RTC */
+#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000)
+
+/* Bus tracer */
+#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000)
+
+/* Event handler (hardware queue) */
+#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000)
+
+/* Genric Timer */
+#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000)
+
+/* PPM */
+#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000)
+
+
+/*
+ * REST peripherals
+ */
+
+/* ISP (image signal processor) is only available in U335 */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_ISP_BASE (0xA0008000)
+#endif
+
+/* DMA Controller base */
+#define U300_DMAC_BASE (0xC0020000)
+
+/* MSL Base */
+#define U300_MSL_BASE (0xc0022000)
+
+/* APEX Base */
+#define U300_APEX_BASE (0xc0030000)
+
+/* Video Encoder Base */
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_VIDEOENC_BASE (0xc0080000)
+#else
+#define U300_VIDEOENC_BASE (0xc0040000)
+#endif
+
+/* XGAM Base */
+#define U300_XGAM_BASE (0xd0000000)
+
+/*
+ * Virtual accessor macros for static devices
+ */
+
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-u300/include/mach/uncompress.h
index 46d4ca9..29acb71 100644
--- a/arch/arm/mach-imx/include/mach/system.h
+++ b/arch/arm/mach-u300/include/mach/uncompress.h
@@ -1,8 +1,7 @@
/*
- * arch/arm/mach-imxads/include/mach/system.h
+ * arch/arm/mach-u300/include/mach/uncompress.h
*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2003 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -18,23 +17,30 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
+#define AMBA_UART_DR (*(volatile unsigned char *)0xc0013000)
+#define AMBA_UART_LCRH (*(volatile unsigned char *)0xc001302C)
+#define AMBA_UART_CR (*(volatile unsigned char *)0xc0013030)
+#define AMBA_UART_FR (*(volatile unsigned char *)0xc0013018)
-static void
-arch_idle(void)
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
+ while (AMBA_UART_FR & (1 << 5))
+ barrier();
+
+ AMBA_UART_DR = c;
}
-static inline void
-arch_reset(char mode, const char *cmd)
+static inline void flush(void)
{
- cpu_reset(0);
+ while (AMBA_UART_FR & (1 << 3))
+ barrier();
}
-#endif
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-u300/include/mach/vmalloc.h b/arch/arm/mach-u300/include/mach/vmalloc.h
new file mode 100644
index 0000000..b00c51a
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/vmalloc.h
@@ -0,0 +1,12 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/vmalloc.h
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Virtual memory allocations
+ * End must be above the I/O registers and on an even 2MiB boundary.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#define VMALLOC_END 0xfe800000
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
new file mode 100644
index 0000000..3138d39
--- /dev/null
+++ b/arch/arm/mach-u300/mmc.c
@@ -0,0 +1,216 @@
+/*
+ *
+ * arch/arm/mach-u300/mmc.c
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Johan Lundin <johan.lundin@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/mmc/host.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/mmc.h>
+#include "mmc.h"
+
+struct mmci_card_event {
+ struct input_dev *mmc_input;
+ int mmc_inserted;
+ struct work_struct workq;
+ struct mmc_platform_data mmc0_plat_data;
+};
+
+static unsigned int mmc_status(struct device *dev)
+{
+ struct mmci_card_event *mmci_card = container_of(
+ dev->platform_data,
+ struct mmci_card_event, mmc0_plat_data);
+
+ return mmci_card->mmc_inserted;
+}
+
+/*
+ * Here follows a large chunk of code which will only be enabled if you
+ * have both the AB3100 chip mounted and the MMC subsystem activated.
+ */
+
+static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage)
+{
+ int v;
+
+ /*
+ * MMC Spec:
+ * bit 7: 1.70 - 1.95V
+ * bit 8 - 14: 2.0 - 2.6V
+ * bit 15 - 23: 2.7 - 3.6V
+ *
+ * ab3100 voltages:
+ * 000 - 2.85V
+ * 001 - 2.75V
+ * 010 - 1.8V
+ * 011 - 1.5V
+ */
+ switch (voltage) {
+ case 8:
+ v = 3;
+ break;
+ case 9:
+ case 10:
+ case 11:
+ case 12:
+ case 13:
+ case 14:
+ case 15:
+ v = 1;
+ break;
+ case 16:
+ v = 1;
+ break;
+ case 17:
+ case 18:
+ case 19:
+ case 20:
+ case 21:
+ case 22:
+ case 23:
+ case 24:
+ v = 0;
+ break;
+ default:
+ v = 0;
+ break;
+ }
+
+ /* PL180 voltage register bits */
+ return v << 2;
+}
+
+
+
+static int mmci_callback(void *data)
+{
+ struct mmci_card_event *mmci_card = data;
+
+ disable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD);
+ schedule_work(&mmci_card->workq);
+
+ return 0;
+}
+
+
+static ssize_t gpio_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct mmci_card_event *mmci_card = container_of(
+ dev->platform_data,
+ struct mmci_card_event, mmc0_plat_data);
+
+
+ return sprintf(buf, "%d\n", !mmci_card->mmc_inserted);
+}
+
+static DEVICE_ATTR(mmc_inserted, S_IRUGO, gpio_show, NULL);
+
+static void _mmci_callback(struct work_struct *ws)
+{
+
+ struct mmci_card_event *mmci_card = container_of(
+ ws,
+ struct mmci_card_event, workq);
+
+ mdelay(20);
+
+ mmci_card->mmc_inserted = !!gpio_get_value(U300_GPIO_PIN_MMC_CD);
+
+ input_report_switch(mmci_card->mmc_input, KEY_INSERT,
+ !mmci_card->mmc_inserted);
+ input_sync(mmci_card->mmc_input);
+
+ pr_debug("MMC/SD card was %s\n",
+ mmci_card->mmc_inserted ? "removed" : "inserted");
+
+ enable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD, !mmci_card->mmc_inserted);
+}
+
+int __devinit mmc_init(struct amba_device *adev)
+{
+ struct mmci_card_event *mmci_card;
+ struct device *mmcsd_device = &adev->dev;
+ int ret = 0;
+
+ mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL);
+ if (!mmci_card)
+ return -ENOMEM;
+
+ /* Nominally 2.85V on our platform */
+ mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
+ mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
+ mmci_card->mmc0_plat_data.status = mmc_status;
+
+ mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
+
+ INIT_WORK(&mmci_card->workq, _mmci_callback);
+
+ ret = gpio_request(U300_GPIO_PIN_MMC_CD, "MMC card detection");
+ if (ret) {
+ printk(KERN_CRIT "Could not allocate MMC card detection " \
+ "GPIO pin\n");
+ goto out;
+ }
+
+ ret = gpio_direction_input(U300_GPIO_PIN_MMC_CD);
+ if (ret) {
+ printk(KERN_CRIT "Invalid GPIO pin requested\n");
+ goto out;
+ }
+
+ ret = sysfs_create_file(&mmcsd_device->kobj,
+ &dev_attr_mmc_inserted.attr);
+ if (ret)
+ goto out;
+
+ mmci_card->mmc_input = input_allocate_device();
+ if (!mmci_card->mmc_input) {
+ printk(KERN_CRIT "Could not allocate MMC input device\n");
+ return -ENOMEM;
+ }
+
+ mmci_card->mmc_input->name = "MMC insert notification";
+ mmci_card->mmc_input->id.bustype = BUS_HOST;
+ mmci_card->mmc_input->id.vendor = 0;
+ mmci_card->mmc_input->id.product = 0;
+ mmci_card->mmc_input->id.version = 0x0100;
+ mmci_card->mmc_input->dev.parent = mmcsd_device;
+ input_set_capability(mmci_card->mmc_input, EV_SW, KEY_INSERT);
+
+ /*
+ * Since this must always be compiled into the kernel, this input
+ * is never unregistered or free:ed.
+ */
+ ret = input_register_device(mmci_card->mmc_input);
+ if (ret) {
+ input_free_device(mmci_card->mmc_input);
+ goto out;
+ }
+
+ input_set_drvdata(mmci_card->mmc_input, mmci_card);
+
+ ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback,
+ mmci_card);
+
+ schedule_work(&mmci_card->workq);
+
+ printk(KERN_INFO "Registered MMC insert/remove notification\n");
+out:
+ return ret;
+}
diff --git a/arch/arm/mach-u300/mmc.h b/arch/arm/mach-u300/mmc.h
new file mode 100644
index 0000000..92b8512
--- /dev/null
+++ b/arch/arm/mach-u300/mmc.h
@@ -0,0 +1,18 @@
+/*
+ *
+ * arch/arm/mach-u300/mmc.h
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#ifndef MMC_H
+#define MMC_H
+
+#include <linux/amba/bus.h>
+
+int __devinit mmc_init(struct amba_device *adev);
+
+#endif
diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c
new file mode 100644
index 0000000..f366456
--- /dev/null
+++ b/arch/arm/mach-u300/padmux.c
@@ -0,0 +1,58 @@
+/*
+ *
+ * arch/arm/mach-u300/padmux.c
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 PADMUX functions
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+#include <linux/io.h>
+#include <linux/err.h>
+#include <mach/u300-regs.h>
+#include <mach/syscon.h>
+
+#include "padmux.h"
+
+/* Set the PAD MUX to route the MMC reader correctly to GPIO0. */
+void pmx_set_mission_mode_mmc(void)
+{
+ u16 val;
+
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
+ val &= ~U300_SYSCON_PMC1LR_MMCSD_MASK;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+ val &= ~U300_SYSCON_PMC1HR_APP_GPIO_1_MASK;
+ val |= U300_SYSCON_PMC1HR_APP_GPIO_1_MMC;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+}
+
+void pmx_set_mission_mode_spi(void)
+{
+ u16 val;
+
+ /* Set up padmuxing so the SPI port and its chipselects are active */
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+ /*
+ * Activate the SPI port (disable the use of these pins for generic
+ * GPIO, DSP, AAIF
+ */
+ val &= ~U300_SYSCON_PMC1HR_APP_SPI_2_MASK;
+ val |= U300_SYSCON_PMC1HR_APP_SPI_2_SPI;
+ /*
+ * Use GPIO pin SPI CS1 for CS1 actually (it can be used for other
+ * things also)
+ */
+ val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK;
+ val |= U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI;
+ /*
+ * Use GPIO pin SPI CS2 for CS2 actually (it can be used for other
+ * things also)
+ */
+ val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK;
+ val |= U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+}
diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h
new file mode 100644
index 0000000..8c2099a
--- /dev/null
+++ b/arch/arm/mach-u300/padmux.h
@@ -0,0 +1,19 @@
+/*
+ *
+ * arch/arm/mach-u300/padmux.h
+ *
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * U300 PADMUX API
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+
+#ifndef __MACH_U300_PADMUX_H
+#define __MACH_U300_PADMUX_H
+
+void pmx_set_mission_mode_mmc(void);
+void pmx_set_mission_mode_spi(void);
+
+#endif
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
new file mode 100644
index 0000000..cce5320
--- /dev/null
+++ b/arch/arm/mach-u300/timer.c
@@ -0,0 +1,422 @@
+/*
+ *
+ * arch/arm/mach-u300/timer.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Timer COH 901 328, runs the OS timer interrupt.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/types.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+/* Generic stuff */
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+
+#include "clock.h"
+
+/*
+ * APP side special timer registers
+ * This timer contains four timers which can fire an interrupt each.
+ * OS (operating system) timer @ 32768 Hz
+ * DD (device driver) timer @ 1 kHz
+ * GP1 (general purpose 1) timer @ 1MHz
+ * GP2 (general purpose 2) timer @ 1MHz
+ */
+
+/* Reset OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_ROST (0x0000)
+#define U300_TIMER_APP_ROST_TIMER_RESET (0x00000000)
+/* Enable OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_EOST (0x0004)
+#define U300_TIMER_APP_EOST_TIMER_ENABLE (0x00000000)
+/* Disable OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_DOST (0x0008)
+#define U300_TIMER_APP_DOST_TIMER_DISABLE (0x00000000)
+/* OS Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SOSTM (0x000c)
+#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS (0x00000000)
+#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT (0x00000001)
+/* OS Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_OSTS (0x0010)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK (0x0000000F)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE (0x00000001)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE (0x00000002)
+#define U300_TIMER_APP_OSTS_ENABLE_IND (0x00000010)
+#define U300_TIMER_APP_OSTS_MODE_MASK (0x00000020)
+#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS (0x00000000)
+#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT (0x00000020)
+#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND (0x00000040)
+#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND (0x00000080)
+/* OS Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_OSTCC (0x0014)
+/* OS Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_OSTTC (0x0018)
+/* OS Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_OSTIE (0x001c)
+#define U300_TIMER_APP_OSTIE_IRQ_DISABLE (0x00000000)
+#define U300_TIMER_APP_OSTIE_IRQ_ENABLE (0x00000001)
+/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_OSTIA (0x0020)
+#define U300_TIMER_APP_OSTIA_IRQ_ACK (0x00000080)
+
+/* Reset DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_RDDT (0x0040)
+#define U300_TIMER_APP_RDDT_TIMER_RESET (0x00000000)
+/* Enable DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_EDDT (0x0044)
+#define U300_TIMER_APP_EDDT_TIMER_ENABLE (0x00000000)
+/* Disable DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_DDDT (0x0048)
+#define U300_TIMER_APP_DDDT_TIMER_DISABLE (0x00000000)
+/* DD Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SDDTM (0x004c)
+#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS (0x00000000)
+#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT (0x00000001)
+/* DD Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_DDTS (0x0050)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK (0x0000000F)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE (0x00000001)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE (0x00000002)
+#define U300_TIMER_APP_DDTS_ENABLE_IND (0x00000010)
+#define U300_TIMER_APP_DDTS_MODE_MASK (0x00000020)
+#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS (0x00000000)
+#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT (0x00000020)
+#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND (0x00000040)
+#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND (0x00000080)
+/* DD Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_DDTCC (0x0054)
+/* DD Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_DDTTC (0x0058)
+/* DD Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_DDTIE (0x005c)
+#define U300_TIMER_APP_DDTIE_IRQ_DISABLE (0x00000000)
+#define U300_TIMER_APP_DDTIE_IRQ_ENABLE (0x00000001)
+/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_DDTIA (0x0060)
+#define U300_TIMER_APP_DDTIA_IRQ_ACK (0x00000080)
+
+/* Reset GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_RGPT1 (0x0080)
+#define U300_TIMER_APP_RGPT1_TIMER_RESET (0x00000000)
+/* Enable GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_EGPT1 (0x0084)
+#define U300_TIMER_APP_EGPT1_TIMER_ENABLE (0x00000000)
+/* Disable GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_DGPT1 (0x0088)
+#define U300_TIMER_APP_DGPT1_TIMER_DISABLE (0x00000000)
+/* GP1 Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SGPT1M (0x008c)
+#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS (0x00000000)
+#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT (0x00000001)
+/* GP1 Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT1S (0x0090)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK (0x0000000F)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE (0x00000001)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE (0x00000002)
+#define U300_TIMER_APP_GPT1S_ENABLE_IND (0x00000010)
+#define U300_TIMER_APP_GPT1S_MODE_MASK (0x00000020)
+#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS (0x00000000)
+#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT (0x00000020)
+#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND (0x00000040)
+#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND (0x00000080)
+/* GP1 Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT1CC (0x0094)
+/* GP1 Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_GPT1TC (0x0098)
+/* GP1 Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT1IE (0x009c)
+#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE (0x00000000)
+#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE (0x00000001)
+/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT1IA (0x00a0)
+#define U300_TIMER_APP_GPT1IA_IRQ_ACK (0x00000080)
+
+/* Reset GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_RGPT2 (0x00c0)
+#define U300_TIMER_APP_RGPT2_TIMER_RESET (0x00000000)
+/* Enable GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_EGPT2 (0x00c4)
+#define U300_TIMER_APP_EGPT2_TIMER_ENABLE (0x00000000)
+/* Disable GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_DGPT2 (0x00c8)
+#define U300_TIMER_APP_DGPT2_TIMER_DISABLE (0x00000000)
+/* GP2 Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SGPT2M (0x00cc)
+#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS (0x00000000)
+#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT (0x00000001)
+/* GP2 Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT2S (0x00d0)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK (0x0000000F)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE (0x00000001)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE (0x00000002)
+#define U300_TIMER_APP_GPT2S_ENABLE_IND (0x00000010)
+#define U300_TIMER_APP_GPT2S_MODE_MASK (0x00000020)
+#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS (0x00000000)
+#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT (0x00000020)
+#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND (0x00000040)
+#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND (0x00000080)
+/* GP2 Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT2CC (0x00d4)
+/* GP2 Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_GPT2TC (0x00d8)
+/* GP2 Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT2IE (0x00dc)
+#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE (0x00000000)
+#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE (0x00000001)
+/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT2IA (0x00e0)
+#define U300_TIMER_APP_GPT2IA_IRQ_ACK (0x00000080)
+
+/* Clock request control register - all four timers */
+#define U300_TIMER_APP_CRC (0x100)
+#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE (0x00000001)
+
+#define TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+#define US_PER_TICK ((1000000 + (HZ/2)) / HZ)
+
+/*
+ * The u300_set_mode() function is always called first, if we
+ * have oneshot timer active, the oneshot scheduling function
+ * u300_set_next_event() is called immediately after.
+ */
+static void u300_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ /* Disable interrupts on GPT1 */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+ /* Disable GP1 while we're reprogramming it. */
+ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+ /*
+ * Set the periodic mode to a certain number of ticks per
+ * jiffy.
+ */
+ writel(TICKS_PER_JIFFY,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+ /*
+ * Set continuous mode, so the timer keeps triggering
+ * interrupts.
+ */
+ writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+ /* Enable timer interrupts */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+ /* Then enable the OS timer again */
+ writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* Just break; here? */
+ /*
+ * The actual event will be programmed by the next event hook,
+ * so we just set a dummy value somewhere at the end of the
+ * universe here.
+ */
+ /* Disable interrupts on GPT1 */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+ /* Disable GP1 while we're reprogramming it. */
+ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+ /*
+ * Expire far in the future, u300_set_next_event() will be
+ * called soon...
+ */
+ writel(0xFFFFFFFF, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+ /* We run one shot per tick here! */
+ writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+ /* Enable interrupts for this timer */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+ /* Enable timer */
+ writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ /* Disable interrupts on GP1 */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+ /* Disable GP1 */
+ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ /* Ignore this call */
+ break;
+ }
+}
+
+/*
+ * The app timer in one shot mode obviously has to be reprogrammed
+ * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace
+ * the interrupt disable + timer disable commands with a reset command,
+ * it will fail miserably. Apparently (and I found this the hard way)
+ * the timer is very sensitive to the instruction order, though you don't
+ * get that impression from the data sheet.
+ */
+static int u300_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+
+{
+ /* Disable interrupts on GPT1 */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+ /* Disable GP1 while we're reprogramming it. */
+ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
+ /* Reset the General Purpose timer 1. */
+ writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
+ /* IRQ in n * cycles */
+ writel(cycles, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
+ /*
+ * We run one shot per tick here! (This is necessary to reconfigure,
+ * the timer will tilt if you don't!)
+ */
+ writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
+ /* Enable timer interrupts */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
+ /* Then enable the OS timer again */
+ writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
+ return 0;
+}
+
+
+/* Use general purpose timer 1 as clock event */
+static struct clock_event_device clockevent_u300_1mhz = {
+ .name = "GPT1",
+ .rating = 300, /* Reasonably fast and accurate clock event */
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ /* 22 calculated using the algorithm in arch/mips/kernel/time.c */
+ .shift = 22,
+ .set_next_event = u300_set_next_event,
+ .set_mode = u300_set_mode,
+};
+
+/* Clock event timer interrupt handler */
+static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &clockevent_u300_1mhz;
+ /* ACK/Clear timer IRQ for the APP GPT1 Timer */
+ writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IA);
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction u300_timer_irq = {
+ .name = "U300 Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = u300_timer_interrupt,
+};
+
+/* Use general purpose timer 2 as clock source */
+static cycle_t u300_get_cycles(struct clocksource *cs)
+{
+ return (cycles_t) readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
+}
+
+static struct clocksource clocksource_u300_1mhz = {
+ .name = "GPT2",
+ .rating = 300, /* Reasonably fast and accurate clock source */
+ .read = u300_get_cycles,
+ .mask = CLOCKSOURCE_MASK(32), /* 32 bits */
+ /* 22 calculated using the algorithm in arch/mips/kernel/time.c */
+ .shift = 22,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+
+/*
+ * This sets up the system timers, clock source and clock event.
+ */
+static void __init u300_timer_init(void)
+{
+ u300_enable_timer_clock();
+ /*
+ * Disable the "OS" and "DD" timers - these are designed for Symbian!
+ * Example usage in cnh1601578 cpu subsystem pd_timer_app.c
+ */
+ writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_CRC);
+ writel(U300_TIMER_APP_ROST_TIMER_RESET,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_ROST);
+ writel(U300_TIMER_APP_DOST_TIMER_DISABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_DOST);
+ writel(U300_TIMER_APP_RDDT_TIMER_RESET,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_RDDT);
+ writel(U300_TIMER_APP_DDDT_TIMER_DISABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_DDDT);
+
+ /* Reset the General Purpose timer 1. */
+ writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
+
+ /* Set up the IRQ handler */
+ setup_irq(IRQ_U300_TIMER_APP_GP1, &u300_timer_irq);
+
+ /* Reset the General Purpose timer 2 */
+ writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT2);
+ /* Set this timer to run around forever */
+ writel(0xFFFFFFFFU, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2TC);
+ /* Set continuous mode so it wraps around */
+ writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT2M);
+ /* Disable timer interrupts */
+ writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2IE);
+ /* Then enable the GP2 timer to use as a free running us counter */
+ writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
+ U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2);
+
+ /* This is a pure microsecond clock source */
+ clocksource_u300_1mhz.mult =
+ clocksource_khz2mult(1000, clocksource_u300_1mhz.shift);
+ if (clocksource_register(&clocksource_u300_1mhz))
+ printk(KERN_ERR "timer: failed to initialize clock "
+ "source %s\n", clocksource_u300_1mhz.name);
+
+ clockevent_u300_1mhz.mult =
+ div_sc(1000000, NSEC_PER_SEC, clockevent_u300_1mhz.shift);
+ /* 32bit counter, so 32bits delta is max */
+ clockevent_u300_1mhz.max_delta_ns =
+ clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz);
+ /* This timer is slow enough to set for 1 cycle == 1 MHz */
+ clockevent_u300_1mhz.min_delta_ns =
+ clockevent_delta2ns(1, &clockevent_u300_1mhz);
+ clockevent_u300_1mhz.cpumask = cpumask_of(0);
+ clockevents_register_device(&clockevent_u300_1mhz);
+ /*
+ * TODO: init and register the rest of the timers too, they can be
+ * used by hrtimers!
+ */
+}
+
+/*
+ * Very simple system timer that only register the clock event and
+ * clock source.
+ */
+struct sys_timer u300_timer = {
+ .init = u300_timer_init,
+};
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
new file mode 100644
index 0000000..d2a0b88
--- /dev/null
+++ b/arch/arm/mach-u300/u300.c
@@ -0,0 +1,55 @@
+/*
+ *
+ * arch/arm/mach-u300/u300.c
+ *
+ *
+ * Copyright (C) 2006-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Platform machine definition.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <mach/memory.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init u300_init_machine(void)
+{
+ u300_init_devices();
+}
+
+#ifdef CONFIG_MACH_U300_BS2X
+#define MACH_U300_STRING "Ericsson AB U300 S25/S26/B25/B26 Prototype Board"
+#endif
+
+#ifdef CONFIG_MACH_U300_BS330
+#define MACH_U300_STRING "Ericsson AB U330 S330/B330 Prototype Board"
+#endif
+
+#ifdef CONFIG_MACH_U300_BS335
+#define MACH_U300_STRING "Ericsson AB U335 S335/B335 Prototype Board"
+#endif
+
+#ifdef CONFIG_MACH_U300_BS365
+#define MACH_U300_STRING "Ericsson AB U365 S365/B365 Prototype Board"
+#endif
+
+MACHINE_START(U300, MACH_U300_STRING)
+ /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
+ .phys_io = U300_AHB_PER_PHYS_BASE,
+ .io_pg_offst = ((U300_AHB_PER_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = BOOT_PARAMS_OFFSET,
+ .map_io = u300_map_io,
+ .init_irq = u300_init_irq,
+ .timer = &u300_timer,
+ .init_machine = u300_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index b3bebcc..69214fc 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -116,7 +116,7 @@ void __init versatile_init_irq(void)
{
unsigned int i;
- vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0);
+ vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0);
set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq);
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index 0c0c1d6..d50c94f 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -4,7 +4,7 @@
# Object file lists.
-obj-y := irq.o time.o
+obj-y := irq.o time.o mfp-w90p910.o gpio.o clock.o
# W90X900 CPU support files
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
new file mode 100644
index 0000000..f420613
--- /dev/null
+++ b/arch/arm/mach-w90x900/clock.c
@@ -0,0 +1,77 @@
+/*
+ * linux/arch/arm/mach-w90x900/clock.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include "clock.h"
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (clk->enabled++ == 0)
+ (clk->enable)(clk, 1);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ WARN_ON(clk->enabled == 0);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (--clk->enabled == 0)
+ (clk->enable)(clk, 0);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+void w90x900_clk_enable(struct clk *clk, int enable)
+{
+ unsigned int clocks = clk->cken;
+ unsigned long clken;
+
+ clken = __raw_readl(W90X900_VA_CLKPWR);
+
+ if (enable)
+ clken |= clocks;
+ else
+ clken &= ~clocks;
+
+ __raw_writel(clken, W90X900_VA_CLKPWR);
+}
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+ int i;
+
+ for (i = 0; i < num; i++)
+ clkdev_add(&clks[i]);
+}
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
new file mode 100644
index 0000000..4f27bda
--- /dev/null
+++ b/arch/arm/mach-w90x900/clock.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/mach-w90x900/clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <asm/clkdev.h>
+
+void w90x900_clk_enable(struct clk *clk, int enable);
+void clks_register(struct clk_lookup *clks, size_t num);
+
+struct clk {
+ unsigned long cken;
+ unsigned int enabled;
+ void (*enable)(struct clk *, int enable);
+};
+
+#define DEFINE_CLK(_name, _ctrlbit) \
+struct clk clk_##_name = { \
+ .enable = w90x900_clk_enable, \
+ .cken = (1 << _ctrlbit), \
+ }
+
+#define DEF_CLKLOOK(_clk, _devname, _conname) \
+ { \
+ .clk = _clk, \
+ .dev_id = _devname, \
+ .con_id = _conname, \
+ }
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index de29ddc..57b5dba 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -41,7 +41,7 @@ struct sys_timer;
extern void w90x900_init_irq(void);
extern void w90p910_init_io(struct map_desc *mach_desc, int size);
extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
-extern void w90p910_init_clocks(int xtal);
+extern void w90p910_init_clocks(void);
extern void w90p910_map_io(struct map_desc *mach_desc, int size);
extern struct platform_device w90p910_serial_device;
extern struct sys_timer w90x900_timer;
diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c
new file mode 100644
index 0000000..c72e0df
--- /dev/null
+++ b/arch/arm/mach-w90x900/gpio.c
@@ -0,0 +1,154 @@
+/*
+ * linux/arch/arm/mach-w90p910/gpio.c
+ *
+ * Generic w90p910 GPIO handling
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+
+#define GPIO_BASE (W90X900_VA_GPIO)
+#define GPIO_DIR (0x04)
+#define GPIO_OUT (0x08)
+#define GPIO_IN (0x0C)
+#define GROUPINERV (0x10)
+#define GPIO_GPIO(Nb) (0x00000001 << (Nb))
+#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip)
+
+#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio) \
+ { \
+ .chip = { \
+ .label = name, \
+ .direction_input = w90p910_dir_input, \
+ .direction_output = w90p910_dir_output, \
+ .get = w90p910_gpio_get, \
+ .set = w90p910_gpio_set, \
+ .base = base_gpio, \
+ .ngpio = nr_gpio, \
+ } \
+ }
+
+struct w90p910_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *regbase; /* Base of group register*/
+ spinlock_t gpio_lock;
+};
+
+static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+ void __iomem *pio = w90p910_gpio->regbase + GPIO_IN;
+ unsigned int regval;
+
+ regval = __raw_readl(pio);
+ regval &= GPIO_GPIO(offset);
+
+ return (regval != 0);
+}
+
+static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+ void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT;
+ unsigned int regval;
+ unsigned long flags;
+
+ spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+ regval = __raw_readl(pio);
+
+ if (val)
+ regval |= GPIO_GPIO(offset);
+ else
+ regval &= ~GPIO_GPIO(offset);
+
+ __raw_writel(regval, pio);
+
+ spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+}
+
+static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+ void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+ unsigned int regval;
+ unsigned long flags;
+
+ spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+ regval = __raw_readl(pio);
+ regval &= ~GPIO_GPIO(offset);
+ __raw_writel(regval, pio);
+
+ spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+
+ return 0;
+}
+
+static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+ void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT;
+ void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+ unsigned int regval;
+ unsigned long flags;
+
+ spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+ regval = __raw_readl(pio);
+ regval |= GPIO_GPIO(offset);
+ __raw_writel(regval, pio);
+
+ regval = __raw_readl(outreg);
+
+ if (val)
+ regval |= GPIO_GPIO(offset);
+ else
+ regval &= ~GPIO_GPIO(offset);
+
+ __raw_writel(regval, outreg);
+
+ spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+
+ return 0;
+}
+
+static struct w90p910_gpio_chip w90p910_gpio[] = {
+ W90P910_GPIO_CHIP("GROUPC", 0, 16),
+ W90P910_GPIO_CHIP("GROUPD", 16, 10),
+ W90P910_GPIO_CHIP("GROUPE", 26, 14),
+ W90P910_GPIO_CHIP("GROUPF", 40, 10),
+ W90P910_GPIO_CHIP("GROUPG", 50, 17),
+ W90P910_GPIO_CHIP("GROUPH", 67, 8),
+ W90P910_GPIO_CHIP("GROUPI", 75, 17),
+};
+
+void __init w90p910_init_gpio(int nr_group)
+{
+ unsigned i;
+ struct w90p910_gpio_chip *gpio_chip;
+
+ for (i = 0; i < nr_group; i++) {
+ gpio_chip = &w90p910_gpio[i];
+ spin_lock_init(&gpio_chip->gpio_lock);
+ gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
+ gpiochip_add(&gpio_chip->chip);
+ }
+}
diff --git a/arch/arm/mach-w90x900/include/mach/clkdev.h b/arch/arm/mach-w90x900/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h
new file mode 100644
index 0000000..034da3e
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/gpio.h
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/arm/mach-w90p910/include/mach/gpio.h
+ *
+ * Generic w90p910 GPIO handling
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_W90P910_GPIO_H
+#define __ASM_ARCH_W90P910_GPIO_H
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return irq;
+}
+
+#endif
diff --git a/arch/arm/mach-w90x900/include/mach/irqs.h b/arch/arm/mach-w90x900/include/mach/irqs.h
index 1c583f9..9d5cba3 100644
--- a/arch/arm/mach-w90x900/include/mach/irqs.h
+++ b/arch/arm/mach-w90x900/include/mach/irqs.h
@@ -1,8 +1,7 @@
/*
* arch/arm/mach-w90x900/include/mach/irqs.h
*
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
*
* Wan ZongShun <mcuos.com@gmail.com>
*
@@ -10,8 +9,7 @@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
*
*/
@@ -31,6 +29,11 @@
/* Main cpu interrupts */
#define IRQ_WDT W90X900_IRQ(1)
+#define IRQ_GROUP0 W90X900_IRQ(2)
+#define IRQ_GROUP1 W90X900_IRQ(3)
+#define IRQ_ACTL W90X900_IRQ(4)
+#define IRQ_LCD W90X900_IRQ(5)
+#define IRQ_RTC W90X900_IRQ(6)
#define IRQ_UART0 W90X900_IRQ(7)
#define IRQ_UART1 W90X900_IRQ(8)
#define IRQ_UART2 W90X900_IRQ(9)
@@ -39,7 +42,45 @@
#define IRQ_TIMER0 W90X900_IRQ(12)
#define IRQ_TIMER1 W90X900_IRQ(13)
#define IRQ_T_INT_GROUP W90X900_IRQ(14)
+#define IRQ_USBH W90X900_IRQ(15)
+#define IRQ_EMCTX W90X900_IRQ(16)
+#define IRQ_EMCRX W90X900_IRQ(17)
+#define IRQ_GDMAGROUP W90X900_IRQ(18)
+#define IRQ_DMAC W90X900_IRQ(19)
+#define IRQ_FMI W90X900_IRQ(20)
+#define IRQ_USBD W90X900_IRQ(21)
+#define IRQ_ATAPI W90X900_IRQ(22)
+#define IRQ_G2D W90X900_IRQ(23)
+#define IRQ_PCI W90X900_IRQ(24)
+#define IRQ_SCGROUP W90X900_IRQ(25)
+#define IRQ_I2CGROUP W90X900_IRQ(26)
+#define IRQ_SSP W90X900_IRQ(27)
+#define IRQ_PWM W90X900_IRQ(28)
+#define IRQ_KPI W90X900_IRQ(29)
+#define IRQ_P2SGROUP W90X900_IRQ(30)
#define IRQ_ADC W90X900_IRQ(31)
#define NR_IRQS (IRQ_ADC+1)
+/*for irq group*/
+
+#define IRQ_PS2_PORT0 0x10000000
+#define IRQ_PS2_PORT1 0x20000000
+#define IRQ_I2C_LINE0 0x04000000
+#define IRQ_I2C_LINE1 0x08000000
+#define IRQ_SC_CARD0 0x01000000
+#define IRQ_SC_CARD1 0x02000000
+#define IRQ_GDMA_CH0 0x00100000
+#define IRQ_GDMA_CH1 0x00200000
+#define IRQ_TIMER2 0x00010000
+#define IRQ_TIMER3 0x00020000
+#define IRQ_TIMER4 0x00040000
+#define IRQ_GROUP0_IRQ0 0x00000001
+#define IRQ_GROUP0_IRQ1 0x00000002
+#define IRQ_GROUP0_IRQ2 0x00000004
+#define IRQ_GROUP0_IRQ3 0x00000008
+#define IRQ_GROUP1_IRQ4 0x00000010
+#define IRQ_GROUP1_IRQ5 0x00000020
+#define IRQ_GROUP1_IRQ6 0x00000040
+#define IRQ_GROUP1_IRQ7 0x00000080
+
#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-w90x900/include/mach/map.h b/arch/arm/mach-w90x900/include/mach/map.h
index 79320eb..1a20953 100644
--- a/arch/arm/mach-w90x900/include/mach/map.h
+++ b/arch/arm/mach-w90x900/include/mach/map.h
@@ -1,8 +1,7 @@
/*
* arch/arm/mach-w90x900/include/mach/map.h
*
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
*
* Wan ZongShun <mcuos.com@gmail.com>
*
@@ -10,8 +9,7 @@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
*
*/
@@ -34,7 +32,6 @@
* interrupt controller is the first thing we put in, to make
* the assembly code for the irq detection easier
*/
-
#define W90X900_VA_IRQ W90X900_ADDR(0x00000000)
#define W90X900_PA_IRQ (0xB8002000)
#define W90X900_SZ_IRQ SZ_4K
@@ -44,33 +41,117 @@
#define W90X900_SZ_GCR SZ_4K
/* Clock and Power management */
-
#define W90X900_VA_CLKPWR (W90X900_VA_GCR+0x200)
#define W90X900_PA_CLKPWR (0xB0000200)
#define W90X900_SZ_CLKPWR SZ_4K
/* EBI management */
-
#define W90X900_VA_EBI W90X900_ADDR(0x00001000)
#define W90X900_PA_EBI (0xB0001000)
#define W90X900_SZ_EBI SZ_4K
/* UARTs */
-
#define W90X900_VA_UART W90X900_ADDR(0x08000000)
#define W90X900_PA_UART (0xB8000000)
#define W90X900_SZ_UART SZ_4K
/* Timers */
-
#define W90X900_VA_TIMER W90X900_ADDR(0x08001000)
#define W90X900_PA_TIMER (0xB8001000)
#define W90X900_SZ_TIMER SZ_4K
/* GPIO ports */
-
#define W90X900_VA_GPIO W90X900_ADDR(0x08003000)
#define W90X900_PA_GPIO (0xB8003000)
#define W90X900_SZ_GPIO SZ_4K
+/* GDMA control */
+#define W90X900_VA_GDMA W90X900_ADDR(0x00004000)
+#define W90X900_PA_GDMA (0xB0004000)
+#define W90X900_SZ_GDMA SZ_4K
+
+/* USB host controller*/
+#define W90X900_VA_USBEHCIHOST W90X900_ADDR(0x00005000)
+#define W90X900_PA_USBEHCIHOST (0xB0005000)
+#define W90X900_SZ_USBEHCIHOST SZ_4K
+
+#define W90X900_VA_USBOHCIHOST W90X900_ADDR(0x00007000)
+#define W90X900_PA_USBOHCIHOST (0xB0007000)
+#define W90X900_SZ_USBOHCIHOST SZ_4K
+
+/* I2C hardware controller */
+#define W90X900_VA_I2C W90X900_ADDR(0x08006000)
+#define W90X900_PA_I2C (0xB8006000)
+#define W90X900_SZ_I2C SZ_4K
+
+/* Keypad Interface*/
+#define W90X900_VA_KPI W90X900_ADDR(0x08008000)
+#define W90X900_PA_KPI (0xB8008000)
+#define W90X900_SZ_KPI SZ_4K
+
+/* Smart card host*/
+#define W90X900_VA_SC W90X900_ADDR(0x08005000)
+#define W90X900_PA_SC (0xB8005000)
+#define W90X900_SZ_SC SZ_4K
+
+/* LCD controller*/
+#define W90X900_VA_LCD W90X900_ADDR(0x00008000)
+#define W90X900_PA_LCD (0xB0008000)
+#define W90X900_SZ_LCD SZ_4K
+
+/* 2D controller*/
+#define W90X900_VA_GE W90X900_ADDR(0x0000B000)
+#define W90X900_PA_GE (0xB000B000)
+#define W90X900_SZ_GE SZ_4K
+
+/* ATAPI */
+#define W90X900_VA_ATAPI W90X900_ADDR(0x0000A000)
+#define W90X900_PA_ATAPI (0xB000A000)
+#define W90X900_SZ_ATAPI SZ_4K
+
+/* ADC */
+#define W90X900_VA_ADC W90X900_ADDR(0x0800A000)
+#define W90X900_PA_ADC (0xB800A000)
+#define W90X900_SZ_ADC SZ_4K
+
+/* PS2 Interface*/
+#define W90X900_VA_PS2 W90X900_ADDR(0x08009000)
+#define W90X900_PA_PS2 (0xB8009000)
+#define W90X900_SZ_PS2 SZ_4K
+
+/* RTC */
+#define W90X900_VA_RTC W90X900_ADDR(0x08004000)
+#define W90X900_PA_RTC (0xB8004000)
+#define W90X900_SZ_RTC SZ_4K
+
+/* Pulse Width Modulation(PWM) Registers */
+#define W90X900_VA_PWM W90X900_ADDR(0x08007000)
+#define W90X900_PA_PWM (0xB8007000)
+#define W90X900_SZ_PWM SZ_4K
+
+/* Audio Controller controller */
+#define W90X900_VA_ACTL W90X900_ADDR(0x00009000)
+#define W90X900_PA_ACTL (0xB0009000)
+#define W90X900_SZ_ACTL SZ_4K
+
+/* DMA controller */
+#define W90X900_VA_DMA W90X900_ADDR(0x0000c000)
+#define W90X900_PA_DMA (0xB000c000)
+#define W90X900_SZ_DMA SZ_4K
+
+/* FMI controller */
+#define W90X900_VA_FMI W90X900_ADDR(0x0000d000)
+#define W90X900_PA_FMI (0xB000d000)
+#define W90X900_SZ_FMI SZ_4K
+
+/* USB Device port */
+#define W90X900_VA_USBDEV W90X900_ADDR(0x00006000)
+#define W90X900_PA_USBDEV (0xB0006000)
+#define W90X900_SZ_USBDEV SZ_4K
+
+/* External MAC control*/
+#define W90X900_VA_EMC W90X900_ADDR(0x00003000)
+#define W90X900_PA_EMC (0xB0003000)
+#define W90X900_SZ_EMC SZ_4K
+
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-clock.h b/arch/arm/mach-w90x900/include/mach/regs-clock.h
new file mode 100644
index 0000000..f10b6a8
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-clock.h
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H
+
+/* Clock Control Registers */
+#define CLK_BA W90X900_VA_CLKPWR
+#define REG_CLKEN (CLK_BA + 0x00)
+#define REG_CLKSEL (CLK_BA + 0x04)
+#define REG_CLKDIV (CLK_BA + 0x08)
+#define REG_PLLCON0 (CLK_BA + 0x0C)
+#define REG_PLLCON1 (CLK_BA + 0x10)
+#define REG_PMCON (CLK_BA + 0x14)
+#define REG_IRQWAKECON (CLK_BA + 0x18)
+#define REG_IRQWAKEFLAG (CLK_BA + 0x1C)
+#define REG_IPSRST (CLK_BA + 0x20)
+#define REG_CLKEN1 (CLK_BA + 0x24)
+#define REG_CLKDIV1 (CLK_BA + 0x28)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-usb.h b/arch/arm/mach-w90x900/include/mach/regs-usb.h
new file mode 100644
index 0000000..ab74b0c
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-usb.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-usb.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_USB_H
+#define __ASM_ARCH_REGS_USB_H
+
+/* usb Control Registers */
+#define USBH_BA W90X900_VA_USBEHCIHOST
+#define USBD_BA W90X900_VA_USBDEV
+#define USBO_BA W90X900_VA_USBOHCIHOST
+
+/* USB Host Control Registers */
+#define REG_UPSCR0 (USBH_BA+0x064)
+#define REG_UPSCR1 (USBH_BA+0x068)
+#define REG_USBPCR0 (USBH_BA+0x0C4)
+#define REG_USBPCR1 (USBH_BA+0x0C8)
+
+/* USBH OHCI Control Registers */
+#define REG_OpModEn (USBO_BA+0x204)
+/*This bit controls the polarity of over
+*current flag from external power IC.
+*/
+#define OCALow 0x08
+
+#endif /* __ASM_ARCH_REGS_USB_H */
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 726ff67..7a62bd3 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -3,15 +3,13 @@
*
* Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
*
- * Copyright (C) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (C) 2008 Nuvoton technology corporation.
*
* Wan ZongShun <mcuos.com@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * published by the Free Software Foundation;version 2 of the License.
*
*/
@@ -80,6 +78,156 @@ static struct platform_device w90p910_flash_device = {
.num_resources = ARRAY_SIZE(w90p910_flash_resources),
};
+/* USB EHCI Host Controller */
+
+static struct resource w90x900_usb_ehci_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBEHCIHOST,
+ .end = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH,
+ .end = IRQ_USBH,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL;
+
+struct platform_device w90x900_device_usb_ehci = {
+ .name = "w90x900-ehci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(w90x900_usb_ehci_resource),
+ .resource = w90x900_usb_ehci_resource,
+ .dev = {
+ .dma_mask = &w90x900_device_usb_ehci_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+EXPORT_SYMBOL(w90x900_device_usb_ehci);
+
+/* USB OHCI Host Controller */
+
+static struct resource w90x900_usb_ohci_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBOHCIHOST,
+ .end = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH,
+ .end = IRQ_USBH,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL;
+struct platform_device w90x900_device_usb_ohci = {
+ .name = "w90x900-ohci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(w90x900_usb_ohci_resource),
+ .resource = w90x900_usb_ohci_resource,
+ .dev = {
+ .dma_mask = &w90x900_device_usb_ohci_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+EXPORT_SYMBOL(w90x900_device_usb_ohci);
+
+/*TouchScreen controller*/
+
+static struct resource w90x900_ts_resource[] = {
+ [0] = {
+ .start = W90X900_PA_ADC,
+ .end = W90X900_PA_ADC + W90X900_SZ_ADC-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_ADC,
+ .end = IRQ_ADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device w90x900_device_ts = {
+ .name = "w90x900-ts",
+ .id = -1,
+ .resource = w90x900_ts_resource,
+ .num_resources = ARRAY_SIZE(w90x900_ts_resource),
+};
+EXPORT_SYMBOL(w90x900_device_ts);
+
+/* RTC controller*/
+
+static struct resource w90x900_rtc_resource[] = {
+ [0] = {
+ .start = W90X900_PA_RTC,
+ .end = W90X900_PA_RTC + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTC,
+ .end = IRQ_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device w90x900_device_rtc = {
+ .name = "w90x900-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(w90x900_rtc_resource),
+ .resource = w90x900_rtc_resource,
+};
+EXPORT_SYMBOL(w90x900_device_rtc);
+
+/* KPI controller*/
+
+static struct resource w90x900_kpi_resource[] = {
+ [0] = {
+ .start = W90X900_PA_KPI,
+ .end = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KPI,
+ .end = IRQ_KPI,
+ .flags = IORESOURCE_IRQ,
+ }
+
+};
+
+struct platform_device w90x900_device_kpi = {
+ .name = "w90x900-kpi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(w90x900_kpi_resource),
+ .resource = w90x900_kpi_resource,
+};
+EXPORT_SYMBOL(w90x900_device_kpi);
+
+/* USB Device (Gadget)*/
+
+static struct resource w90x900_usbgadget_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBDEV,
+ .end = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBD,
+ .end = IRQ_USBD,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device w90x900_device_usbgadget = {
+ .name = "w90x900-usbgadget",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(w90x900_usbgadget_resource),
+ .resource = w90x900_usbgadget_resource,
+};
+EXPORT_SYMBOL(w90x900_device_usbgadget);
+
static struct map_desc w90p910_iodesc[] __initdata = {
};
@@ -88,12 +236,18 @@ static struct map_desc w90p910_iodesc[] __initdata = {
static struct platform_device *w90p910evb_dev[] __initdata = {
&w90p910_serial_device,
&w90p910_flash_device,
+ &w90x900_device_usb_ehci,
+ &w90x900_device_usb_ohci,
+ &w90x900_device_ts,
+ &w90x900_device_rtc,
+ &w90x900_device_kpi,
+ &w90x900_device_usbgadget,
};
static void __init w90p910evb_map_io(void)
{
w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
- w90p910_init_clocks(0);
+ w90p910_init_clocks();
}
static void __init w90p910evb_init(void)
diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
new file mode 100644
index 0000000..a3520fe
--- /dev/null
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -0,0 +1,116 @@
+/*
+ * linux/arch/arm/mach-w90x900/mfp-w90p910.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#define REG_MFSEL (W90X900_VA_GCR + 0xC)
+
+#define GPSELF (0x01 << 1)
+
+#define GPSELC (0x03 << 2)
+#define ENKPI (0x02 << 2)
+#define ENNAND (0x01 << 2)
+
+#define GPSELEI0 (0x01 << 26)
+#define GPSELEI1 (0x01 << 27)
+
+static DECLARE_MUTEX(mfp_sem);
+
+void mfp_set_groupf(struct device *dev)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ down(&mfp_sem);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "w90p910-emc") == 0)
+ mfpen |= GPSELF;/*enable mac*/
+ else
+ mfpen &= ~GPSELF;/*GPIOF[9:0]*/
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupf);
+
+void mfp_set_groupc(struct device *dev)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ down(&mfp_sem);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "w90p910-lcd") == 0)
+ mfpen |= GPSELC;/*enable lcd*/
+ else if (strcmp(dev_id, "w90p910-kpi") == 0) {
+ mfpen &= (~GPSELC);/*enable kpi*/
+ mfpen |= ENKPI;
+ } else if (strcmp(dev_id, "w90p910-nand") == 0) {
+ mfpen &= (~GPSELC);/*enable nand*/
+ mfpen |= ENNAND;
+ } else
+ mfpen &= (~GPSELC);/*GPIOC[14:0]*/
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupc);
+
+void mfp_set_groupi(struct device *dev, int gpio)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ down(&mfp_sem);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "w90p910-wdog") == 0)
+ mfpen |= GPSELEI1;/*enable wdog*/
+ else if (strcmp(dev_id, "w90p910-atapi") == 0)
+ mfpen |= GPSELEI0;/*enable atapi*/
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupi);
+
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 2bcbaa6..1c97e49 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -3,8 +3,7 @@
*
* Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
*
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
*
* Wan ZongShun <mcuos.com@gmail.com>
*
@@ -12,8 +11,7 @@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
*
*/
@@ -36,6 +34,7 @@
#include <mach/regs-serial.h>
#include "cpu.h"
+#include "clock.h"
/* Initial IO mappings */
@@ -45,9 +44,52 @@ static struct map_desc w90p910_iodesc[] __initdata = {
IODESC_ENT(UART),
IODESC_ENT(TIMER),
IODESC_ENT(EBI),
+ IODESC_ENT(USBEHCIHOST),
+ IODESC_ENT(USBOHCIHOST),
+ IODESC_ENT(ADC),
+ IODESC_ENT(RTC),
+ IODESC_ENT(KPI),
+ IODESC_ENT(USBDEV),
/*IODESC_ENT(LCD),*/
};
+/* Initial clock declarations. */
+static DEFINE_CLK(lcd, 0);
+static DEFINE_CLK(audio, 1);
+static DEFINE_CLK(fmi, 4);
+static DEFINE_CLK(dmac, 5);
+static DEFINE_CLK(atapi, 6);
+static DEFINE_CLK(emc, 7);
+static DEFINE_CLK(usbd, 8);
+static DEFINE_CLK(usbh, 9);
+static DEFINE_CLK(g2d, 10);;
+static DEFINE_CLK(pwm, 18);
+static DEFINE_CLK(ps2, 24);
+static DEFINE_CLK(kpi, 25);
+static DEFINE_CLK(wdt, 26);
+static DEFINE_CLK(gdma, 27);
+static DEFINE_CLK(adc, 28);
+static DEFINE_CLK(usi, 29);
+
+static struct clk_lookup w90p910_clkregs[] = {
+ DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
+ DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
+ DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
+ DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
+ DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
+ DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
+ DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
+ DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
+ DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
+ DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL),
+ DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL),
+ DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL),
+ DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
+ DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
+ DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
+ DEF_CLKLOOK(&clk_usi, "w90p910-usi", NULL),
+};
+
/* Initial serial platform data */
struct plat_serial8250_port w90p910_uart_data[] = {
@@ -77,8 +119,9 @@ void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
/*Init W90P910 clock*/
-void __init w90p910_init_clocks(int xtal)
+void __init w90p910_init_clocks(void)
{
+ clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs));
}
static int __init w90p910_init_cpu(void)
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 2097956..83c025e 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -391,7 +391,7 @@ config CPU_FEROCEON_OLD_ID
# ARMv6
config CPU_V6
- bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
+ bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
select CPU_32v6
select CPU_ABRT_EV6
select CPU_PABRT_NOIFAR
@@ -416,7 +416,7 @@ config CPU_32v6K
# ARMv7
config CPU_V7
- bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
+ bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
select CPU_32v6K
select CPU_32v7
select CPU_ABRT_EV7
@@ -639,10 +639,23 @@ config CPU_BIG_ENDIAN
port must properly enable any big-endian related features
of your chipset/board/processor.
+config CPU_ENDIAN_BE8
+ bool
+ depends on CPU_BIG_ENDIAN
+ default CPU_V6 || CPU_V7
+ help
+ Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
+
+config CPU_ENDIAN_BE32
+ bool
+ depends on CPU_BIG_ENDIAN
+ default !CPU_ENDIAN_BE8
+ help
+ Support for the BE-32 (big-endian) mode on pre-ARMv6 processors.
+
config CPU_HIGH_VECTOR
depends on !MMU && CPU_CP15 && !CPU_ARM740T
bool "Select the High exception vector"
- default n
help
Say Y here to select high exception vector(0xFFFF0000~).
The exception vector can be vary depending on the platform
@@ -726,7 +739,6 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
config OUTER_CACHE
bool
- default n
config CACHE_FEROCEON_L2
bool "Enable the Feroceon L2 cache controller"
@@ -739,7 +751,6 @@ config CACHE_FEROCEON_L2
config CACHE_FEROCEON_L2_WRITETHROUGH
bool "Force Feroceon L2 cache write through"
depends on CACHE_FEROCEON_L2
- default n
help
Say Y here to use the Feroceon L2 cache in writethrough mode.
Unless you specifically require this, say N for writeback mode.
@@ -747,7 +758,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
config CACHE_L2X0
bool "Enable the L2x0 outer cache controller"
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
- REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31
+ REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX
default y
select OUTER_CACHE
help
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index 6f7e709..f332df7 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -37,6 +37,9 @@ ENTRY(v6_early_abort)
movne pc, lr
do_thumb_abort
ldreq r3, [r2] @ read aborted ARM instruction
+#ifdef CONFIG_CPU_ENDIAN_BE8
+ reveq r3, r3
+#endif
do_ldrd_abort
tst r3, #1 << 20 @ L = 0 -> write
orreq r1, r1, #1 << 11 @ yes.
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 9f88dd3..0ab75c6 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -110,6 +110,12 @@ static int remap_area_pages(unsigned long start, unsigned long pfn,
return err;
}
+int ioremap_page(unsigned long virt, unsigned long phys,
+ const struct mem_type *mtype)
+{
+ return remap_area_pages(virt, __phys_to_pfn(phys), PAGE_SIZE, mtype);
+}
+EXPORT_SYMBOL(ioremap_page);
void __check_kvm_seq(struct mm_struct *mm)
{
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e6344ec..fdaa9bb 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -255,6 +255,7 @@ const struct mem_type *get_mem_type(unsigned int type)
{
return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
}
+EXPORT_SYMBOL(get_mem_type);
/*
* Adjust the PMD section entries according to the CPU in use.
@@ -839,6 +840,20 @@ void __init reserve_node_zero(pg_data_t *pgdat)
reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
BOOTMEM_EXCLUSIVE);
+ /*
+ * U300 - This platform family can share physical memory
+ * between two ARM cpus, one running Linux and the other
+ * running another OS.
+ */
+ if (machine_is_u300()) {
+#ifdef CONFIG_MACH_U300_SINGLE_RAM
+#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \
+ CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
+ res_size = 0x00100000;
+#endif
+#endif
+ }
+
#ifdef CONFIG_SA1111
/*
* Because of the SA1111 DMA bug, we want to preserve our
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 087e239..524ddae 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -170,6 +170,9 @@ __v6_setup:
#endif /* CONFIG_MMU */
adr r5, v6_crval
ldmia r5, {r5, r6}
+#ifdef CONFIG_CPU_ENDIAN_BE8
+ orr r6, r6, #1 << 25 @ big-endian page tables
+#endif
mrc p15, 0, r0, c1, c0, 0 @ read control register
bic r0, r0, r5 @ clear bits them
orr r0, r0, r6 @ set them
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index a08d9d2..180a08d 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -19,17 +19,23 @@
#include "proc-macros.S"
-#define TTB_C (1 << 0)
#define TTB_S (1 << 1)
#define TTB_RGN_NC (0 << 3)
#define TTB_RGN_OC_WBWA (1 << 3)
#define TTB_RGN_OC_WT (2 << 3)
#define TTB_RGN_OC_WB (3 << 3)
+#define TTB_NOS (1 << 5)
+#define TTB_IRGN_NC ((0 << 0) | (0 << 6))
+#define TTB_IRGN_WBWA ((0 << 0) | (1 << 6))
+#define TTB_IRGN_WT ((1 << 0) | (0 << 6))
+#define TTB_IRGN_WB ((1 << 0) | (1 << 6))
#ifndef CONFIG_SMP
-#define TTB_FLAGS TTB_C|TTB_RGN_OC_WB @ mark PTWs cacheable, outer WB
+/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
+#define TTB_FLAGS TTB_IRGN_WB|TTB_RGN_OC_WB
#else
-#define TTB_FLAGS TTB_C|TTB_S|TTB_RGN_OC_WBWA @ mark PTWs cacheable and shared, outer WBWA
+/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
+#define TTB_FLAGS TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
#endif
ENTRY(cpu_v7_proc_init)
@@ -176,8 +182,8 @@ cpu_v7_name:
*/
__v7_setup:
#ifdef CONFIG_SMP
- mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode
- orr r0, r0, #(0x1 << 6)
+ mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode and
+ orr r0, r0, #(1 << 6) | (1 << 0) @ TLB ops broadcasting
mcr p15, 0, r0, c1, c0, 1
#endif
adr r12, __v7_setup_stack @ the local stack
@@ -227,12 +233,43 @@ __v7_setup:
mov r10, #0x1f @ domains 0, 1 = manager
mcr p15, 0, r10, c3, c0, 0 @ load domain access register
#endif
- ldr r5, =0xff0aa1a8
- ldr r6, =0x40e040e0
+ /*
+ * Memory region attributes with SCTLR.TRE=1
+ *
+ * n = TEX[0],C,B
+ * TR = PRRR[2n+1:2n] - memory type
+ * IR = NMRR[2n+1:2n] - inner cacheable property
+ * OR = NMRR[2n+17:2n+16] - outer cacheable property
+ *
+ * n TR IR OR
+ * UNCACHED 000 00
+ * BUFFERABLE 001 10 00 00
+ * WRITETHROUGH 010 10 10 10
+ * WRITEBACK 011 10 11 11
+ * reserved 110
+ * WRITEALLOC 111 10 01 01
+ * DEV_SHARED 100 01
+ * DEV_NONSHARED 100 01
+ * DEV_WC 001 10
+ * DEV_CACHED 011 10
+ *
+ * Other attributes:
+ *
+ * DS0 = PRRR[16] = 0 - device shareable property
+ * DS1 = PRRR[17] = 1 - device shareable property
+ * NS0 = PRRR[18] = 0 - normal shareable property
+ * NS1 = PRRR[19] = 1 - normal shareable property
+ * NOS = PRRR[24+n] = 1 - not outer shareable
+ */
+ ldr r5, =0xff0a81a8 @ PRRR
+ ldr r6, =0x40e040e0 @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
adr r5, v7_crval
ldmia r5, {r5, r6}
+#ifdef CONFIG_CPU_ENDIAN_BE8
+ orr r6, r6, #1 << 25 @ big-endian page tables
+#endif
mrc p15, 0, r0, c1, c0, 0 @ read control register
bic r0, r0, r5 @ clear bits them
orr r0, r0, r6 @ set them
@@ -240,14 +277,14 @@ __v7_setup:
ENDPROC(__v7_setup)
/* AT
- * TFR EV X F I D LR
- * .EEE ..EE PUI. .T.T 4RVI ZFRS BLDP WCAM
+ * TFR EV X F I D LR S
+ * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
* rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
- * 1 0 110 0011 1.00 .111 1101 < we want
+ * 1 0 110 0011 1100 .111 1101 < we want
*/
.type v7_crval, #object
v7_crval:
- crval clear=0x0120c302, mmuset=0x10c0387d, ucset=0x00c0187c
+ crval clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
__v7_setup_stack:
.space 4 * 11 @ 11 registers
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index b637e73..a26a605 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -42,9 +42,11 @@ ENTRY(v7wbi_flush_user_tlb_range)
mov r1, r1, lsl #PAGE_SHIFT
vma_vm_flags r2, r2 @ get vma->vm_flags
1:
- mcr p15, 0, r0, c8, c6, 1 @ TLB invalidate D MVA (was 1)
- tst r2, #VM_EXEC @ Executable area ?
- mcrne p15, 0, r0, c8, c5, 1 @ TLB invalidate I MVA (was 1)
+#ifdef CONFIG_SMP
+ mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable)
+#else
+ mcr p15, 0, r0, c8, c7, 1 @ TLB invalidate U MVA
+#endif
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
@@ -69,8 +71,11 @@ ENTRY(v7wbi_flush_kern_tlb_range)
mov r0, r0, lsl #PAGE_SHIFT
mov r1, r1, lsl #PAGE_SHIFT
1:
- mcr p15, 0, r0, c8, c6, 1 @ TLB invalidate D MVA
- mcr p15, 0, r0, c8, c5, 1 @ TLB invalidate I MVA
+#ifdef CONFIG_SMP
+ mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable)
+#else
+ mcr p15, 0, r0, c8, c7, 1 @ TLB invalidate U MVA
+#endif
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
@@ -87,5 +92,5 @@ ENDPROC(v7wbi_flush_kern_tlb_range)
ENTRY(v7wbi_tlb_fns)
.long v7wbi_flush_user_tlb_range
.long v7wbi_flush_kern_tlb_range
- .long v6wbi_tlb_flags
+ .long v7wbi_tlb_flags
.size v7wbi_tlb_fns, . - v7wbi_tlb_fns
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 853d42b..4ce0f98 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -41,6 +41,7 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
+#include <mach/board-eb.h>
#include <asm/system.h>
#include "op_counter.h"
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 17d0e99..8986b741 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -48,7 +48,14 @@ config MXC_IRQ_PRIOR
config MXC_PWM
tristate "Enable PWM driver"
depends on ARCH_MXC
+ select HAVE_PWM
help
Enable support for the i.MX PWM controller(s).
+config ARCH_HAS_RNGA
+ bool
+ depends on ARCH_MXC
+
+config ARCH_MXC_IOMUX_V3
+ bool
endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 0554063..e3212c8 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -7,4 +7,5 @@ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_PWM) += pwm.o
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 89e9579..7506d96 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -64,6 +64,8 @@ static void gpio_unmask_irq(u32 irq)
_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
}
+static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
+
static int gpio_set_irq_type(u32 irq, u32 type)
{
u32 gpio = irq_to_gpio(irq);
@@ -72,6 +74,7 @@ static int gpio_set_irq_type(u32 irq, u32 type)
int edge;
void __iomem *reg = port->base;
+ port->both_edges &= ~(1 << (gpio & 31));
switch (type) {
case IRQ_TYPE_EDGE_RISING:
edge = GPIO_INT_RISE_EDGE;
@@ -79,13 +82,24 @@ static int gpio_set_irq_type(u32 irq, u32 type)
case IRQ_TYPE_EDGE_FALLING:
edge = GPIO_INT_FALL_EDGE;
break;
+ case IRQ_TYPE_EDGE_BOTH:
+ val = mxc_gpio_get(&port->chip, gpio & 31);
+ if (val) {
+ edge = GPIO_INT_LOW_LEV;
+ pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
+ } else {
+ edge = GPIO_INT_HIGH_LEV;
+ pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
+ }
+ port->both_edges |= 1 << (gpio & 31);
+ break;
case IRQ_TYPE_LEVEL_LOW:
edge = GPIO_INT_LOW_LEV;
break;
case IRQ_TYPE_LEVEL_HIGH:
edge = GPIO_INT_HIGH_LEV;
break;
- default: /* this includes IRQ_TYPE_EDGE_BOTH */
+ default:
return -EINVAL;
}
@@ -98,6 +112,34 @@ static int gpio_set_irq_type(u32 irq, u32 type)
return 0;
}
+static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
+{
+ void __iomem *reg = port->base;
+ u32 bit, val;
+ int edge;
+
+ reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
+ bit = gpio & 0xf;
+ val = __raw_readl(reg);
+ edge = (val >> (bit << 1)) & 3;
+ val &= ~(0x3 << (bit << 1));
+ switch (edge) {
+ case GPIO_INT_HIGH_LEV:
+ edge = GPIO_INT_LOW_LEV;
+ pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
+ break;
+ case GPIO_INT_LOW_LEV:
+ edge = GPIO_INT_HIGH_LEV;
+ pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
+ break;
+ default:
+ pr_err("mxc: invalid configuration for GPIO %d: %x\n",
+ gpio, edge);
+ return;
+ }
+ __raw_writel(val | (edge << (bit << 1)), reg);
+}
+
/* handle n interrupts in one status register */
static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
{
@@ -105,11 +147,16 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
gpio_irq_no = port->virtual_irq_start;
for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
+ u32 gpio = irq_to_gpio(gpio_irq_no);
if ((irq_stat & 1) == 0)
continue;
BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+
+ if (port->both_edges & (1 << (gpio & 31)))
+ mxc_flip_edge(port, gpio);
+
irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
&irq_desc[gpio_irq_no]);
}
diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
new file mode 100644
index 0000000..8769e91
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>.
+ * All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
+#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
+
+#include <mach/hardware.h>
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
new file mode 100644
index 0000000..06701df
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+
+/*
+ * MXC UART EVB board level configurations
+ */
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR)
+
+/*
+ * Memory-mapped I/O on MX21ADS base board
+ */
+#define MX21ADS_MMIO_BASE_ADDR 0xF5000000
+#define MX21ADS_MMIO_SIZE SZ_16M
+
+#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
+ (MX21ADS_MMIO_BASE_ADDR + (offset))
+
+#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
+#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000)
+#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000)
+
+/* MX21ADS_IO_REG bit definitions */
+#define MX21ADS_IO_SD_WP 0x0001 /* read */
+#define MX21ADS_IO_TP6 0x0001 /* write */
+#define MX21ADS_IO_SW_SEL 0x0002 /* read */
+#define MX21ADS_IO_TP7 0x0002 /* write */
+#define MX21ADS_IO_RESET_E_UART 0x0004
+#define MX21ADS_IO_RESET_BASE 0x0008
+#define MX21ADS_IO_CSI_CTL2 0x0010
+#define MX21ADS_IO_CSI_CTL1 0x0020
+#define MX21ADS_IO_CSI_CTL0 0x0040
+#define MX21ADS_IO_UART1_EN 0x0080
+#define MX21ADS_IO_UART4_EN 0x0100
+#define MX21ADS_IO_LCDON 0x0200
+#define MX21ADS_IO_IRDA_EN 0x0400
+#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
+#define MX21ADS_IO_IRDA_MD0_B 0x1000
+#define MX21ADS_IO_IRDA_MD1 0x2000
+#define MX21ADS_IO_LED4_ON 0x4000
+#define MX21ADS_IO_LED3_ON 0x8000
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
new file mode 100644
index 0000000..a870f8e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
+#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
new file mode 100644
index 0000000..552b55d
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 318c72a..06e6895 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -114,7 +114,7 @@
#define MXC_MAX_EXP_IO_LINES 16
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
new file mode 100644
index 0000000..78cf31e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on code for mobots boards,
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
+#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
+
+#ifndef __ASSEMBLY__
+
+enum mx31lilly_boards {
+ MX31LILLY_NOBOARD = 0,
+ MX31LILLY_DB = 1,
+};
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ */
+
+extern void mx31lilly_db_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index e4e5cf5..52fbdf2 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -11,28 +11,8 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-#define MXC_MAX_EXP_IO_LINES 16
-
-
-/*
- * Memory Size parameters
- */
-
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE SZ_128M
-/*
- * Size of MBX buffer memory
- */
-#define MXC_MBX_MEM_SIZE SZ_16M
-/*
- * Size of memory available to kernel
- */
-#define MEM_SIZE (SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE)
-
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index f8aef1b..303fd24 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -19,7 +19,7 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
index 2b6b316..519bab3 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
@@ -11,9 +11,54 @@
#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000)
+
+/* LED switchs */
+#define CPLD_LED_REG (CPLD_ADDR + 0x00)
+/* buttons */
+#define CPLD_SWITCH_BUTTONS_REG (EXPIO_ADDR + 0x08)
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58)
+/* module reset register */
+#define CPLD_MODULE_RESET_REG (CPLD_ADDR + 0x60)
+/* CPU ID and Personality ID */
+#define CPLD_MCU_BOARD_ID_REG (CPLD_ADDR + 0x68)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0)
+#define EXPIO_INT_XUART_A (MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_XUART_B (MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_BUTTON_A (MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_BUTTON_B (MXC_EXP_IO_BASE + 4)
+
+#define MXC_MAX_EXP_IO_LINES 16
+
#endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
new file mode 100644
index 0000000..1111037
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
index 82232ba..f0a1fa1 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
@@ -19,7 +19,7 @@
#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
#define __ASM_ARCH_MXC_BOARD_PCM037_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 750c62a..4fcd749 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -19,7 +19,7 @@
#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
#define __ASM_ARCH_MXC_BOARD_PCM038_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
new file mode 100644
index 0000000..15fbdf1
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2008 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
+#define __ASM_ARCH_MXC_BOARD_PCM043_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
index 4ff762d..04033ec 100644
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -11,7 +11,7 @@
#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
#define __ASM_ARCH_MXC_BOARD_QONG_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index b2f9b72..02c3cd0 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -14,7 +14,11 @@
struct platform_device;
struct clk;
-extern void mxc_map_io(void);
+extern void mx1_map_io(void);
+extern void mx21_map_io(void);
+extern void mx27_map_io(void);
+extern void mx31_map_io(void);
+extern void mx35_map_io(void);
extern void mxc_init_irq(void);
extern void mxc_timer_init(struct clk *timer_clk);
extern int mx1_clocks_init(unsigned long fref);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 4f77314..bbc5f67 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -25,6 +25,9 @@
#ifdef CONFIG_MACH_MX27ADS
#include <mach/board-mx27ads.h>
#endif
+#ifdef CONFIG_MACH_MX21ADS
+#include <mach/board-mx21ads.h>
+#endif
#ifdef CONFIG_MACH_PCM038
#include <mach/board-pcm038.h>
#endif
@@ -34,6 +37,21 @@
#ifdef CONFIG_MACH_QONG
#include <mach/board-qong.h>
#endif
+#ifdef CONFIG_MACH_PCM043
+#include <mach/board-pcm043.h>
+#endif
+#ifdef CONFIG_MACH_MX27_3DS
+#include <mach/board-mx27pdk.h>
+#endif
+#ifdef CONFIG_MACH_ARMADILLO5X0
+#include <mach/board-armadillo5x0.h>
+#endif
+#ifdef CONFIG_MACH_MX35_3DS
+#include <mach/board-mx35pdk.h>
+#endif
+#ifdef CONFIG_MACH_MX27LITE
+#include <mach/board-mx27lite.h>
+#endif
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index ea509f1..894d2f8 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -35,6 +35,7 @@ struct mxc_gpio_port {
int irq;
int virtual_irq_start;
struct gpio_chip chip;
+ u32 both_edges;
};
int mxc_gpio_init(struct mxc_gpio_port*, int);
diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
index f9bd17d..4adec9b 100644
--- a/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
@@ -24,7 +24,7 @@
struct imxuart_platform_data {
int (*init)(struct platform_device *pdev);
- int (*exit)(struct platform_device *pdev);
+ void (*exit)(struct platform_device *pdev);
unsigned int flags;
void (*irda_enable)(int enable);
unsigned int irda_inv_rx:1;
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 762a7b0..9f01011 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -76,8 +76,8 @@ struct imx_fb_platform_data {
u_char * fixed_screen_cpu;
dma_addr_t fixed_screen_dma;
- int (*init)(struct platform_device*);
- int (*exit)(struct platform_device*);
+ int (*init)(struct platform_device *);
+ void (*exit)(struct platform_device *);
void (*lcd_power)(int);
void (*backlight_power)(int);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 57e927a..27f8d1b 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -114,7 +114,7 @@ enum iomux_gp_func {
* - setups the iomux according to the configuration
* - if the pin is configured as a GPIO, we claim it throug kernel gpiolib
*/
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label);
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label);
/*
* setups mutliple pins
* convenient way to call the above function with tables
@@ -633,6 +633,40 @@ enum iomux_pins {
#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
* cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
new file mode 100644
index 0000000..00b0ac1
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -0,0 +1,1267 @@
+/*
+ * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option, NO_PAD_CTRL) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_MX35_H__
+#define __MACH_IOMUX_MX35_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num> see also iomux-v3.h
+ */
+
+/* PAD MUX ALT INPSE PATH */
+#define MX35_PAD_CAPTURE__GPT_CAPIN1 IOMUX_PAD(0x328, 0x004, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPT_CMPOUT2 IOMUX_PAD(0x328, 0x004, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CSPI2_SS1 IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__EPIT1_EPITO IOMUX_PAD(0x328, 0x004, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CCM_CLK32K IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPIO1_4 IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_COMPARE__GPT_CMPOUT1 IOMUX_PAD(0x32c, 0x008, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CAPIN2 IOMUX_PAD(0x32c, 0x008, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CMPOUT3 IOMUX_PAD(0x32c, 0x008, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__EPIT2_EPITO IOMUX_PAD(0x32c, 0x008, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPIO1_5 IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__SDMA_EXTDMA_2 IOMUX_PAD(0x32c, 0x008, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_WDOG_RST__WDOG_WDOG_B IOMUX_PAD(0x330, 0x00c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE IOMUX_PAD(0x330, 0x00c, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__GPIO1_6 IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__OWIRE_LINE IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 IOMUX_PAD(0x334, 0x010, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__PWM_PWMO IOMUX_PAD(0x338, 0x014, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__CSPI1_SS2 IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT IOMUX_PAD(0x338, 0x014, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 IOMUX_PAD(0x338, 0x014, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO2_0__GPIO2_0 IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK IOMUX_PAD(0x33c, 0x018, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO3_0__GPIO3_0 IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK IOMUX_PAD(0x340, 0x01c, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B IOMUX_PAD(0x344, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_POR_B__CCM_POR_B IOMUX_PAD(0x348, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLKO__CCM_CLKO IOMUX_PAD(0x34c, 0x020, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CLKO__GPIO1_8 IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 IOMUX_PAD(0x350, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 IOMUX_PAD(0x354, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 IOMUX_PAD(0x358, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 IOMUX_PAD(0x35c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 IOMUX_PAD(0x360, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_VSTBY__CCM_VSTBY IOMUX_PAD(0x364, 0x024, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_VSTBY__GPIO1_7 IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A0__EMI_EIM_DA_L_0 IOMUX_PAD(0x368, 0x028, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A1__EMI_EIM_DA_L_1 IOMUX_PAD(0x36c, 0x02c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A2__EMI_EIM_DA_L_2 IOMUX_PAD(0x370, 0x030, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A3__EMI_EIM_DA_L_3 IOMUX_PAD(0x374, 0x034, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A4__EMI_EIM_DA_L_4 IOMUX_PAD(0x378, 0x038, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A5__EMI_EIM_DA_L_5 IOMUX_PAD(0x37c, 0x03c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A6__EMI_EIM_DA_L_6 IOMUX_PAD(0x380, 0x040, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A7__EMI_EIM_DA_L_7 IOMUX_PAD(0x384, 0x044, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A8__EMI_EIM_DA_H_8 IOMUX_PAD(0x388, 0x048, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A9__EMI_EIM_DA_H_9 IOMUX_PAD(0x38c, 0x04c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A10__EMI_EIM_DA_H_10 IOMUX_PAD(0x390, 0x050, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_MA10__EMI_MA10 IOMUX_PAD(0x394, 0x054, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A11__EMI_EIM_DA_H_11 IOMUX_PAD(0x398, 0x058, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A12__EMI_EIM_DA_H_12 IOMUX_PAD(0x39c, 0x05c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A13__EMI_EIM_DA_H_13 IOMUX_PAD(0x3a0, 0x060, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A14__EMI_EIM_DA_H2_14 IOMUX_PAD(0x3a4, 0x064, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A15__EMI_EIM_DA_H2_15 IOMUX_PAD(0x3a8, 0x068, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A16__EMI_EIM_A_16 IOMUX_PAD(0x3ac, 0x06c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A17__EMI_EIM_A_17 IOMUX_PAD(0x3b0, 0x070, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A18__EMI_EIM_A_18 IOMUX_PAD(0x3b4, 0x074, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A19__EMI_EIM_A_19 IOMUX_PAD(0x3b8, 0x078, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A20__EMI_EIM_A_20 IOMUX_PAD(0x3bc, 0x07c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A21__EMI_EIM_A_21 IOMUX_PAD(0x3c0, 0x080, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A22__EMI_EIM_A_22 IOMUX_PAD(0x3c4, 0x084, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A23__EMI_EIM_A_23 IOMUX_PAD(0x3c8, 0x088, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A24__EMI_EIM_A_24 IOMUX_PAD(0x3cc, 0x08c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A25__EMI_EIM_A_25 IOMUX_PAD(0x3d0, 0x090, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA1__EMI_EIM_SDBA1 IOMUX_PAD(0x3d4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA0__EMI_EIM_SDBA0 IOMUX_PAD(0x3d8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD0__EMI_DRAM_D_0 IOMUX_PAD(0x3dc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1__EMI_DRAM_D_1 IOMUX_PAD(0x3e0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2__EMI_DRAM_D_2 IOMUX_PAD(0x3e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD3__EMI_DRAM_D_3 IOMUX_PAD(0x3e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD4__EMI_DRAM_D_4 IOMUX_PAD(0x3ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD5__EMI_DRAM_D_5 IOMUX_PAD(0x3f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD6__EMI_DRAM_D_6 IOMUX_PAD(0x3f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD7__EMI_DRAM_D_7 IOMUX_PAD(0x3f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD8__EMI_DRAM_D_8 IOMUX_PAD(0x3fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD9__EMI_DRAM_D_9 IOMUX_PAD(0x400, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD10__EMI_DRAM_D_10 IOMUX_PAD(0x404, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD11__EMI_DRAM_D_11 IOMUX_PAD(0x408, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD12__EMI_DRAM_D_12 IOMUX_PAD(0x40c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD13__EMI_DRAM_D_13 IOMUX_PAD(0x410, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD14__EMI_DRAM_D_14 IOMUX_PAD(0x414, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD15__EMI_DRAM_D_15 IOMUX_PAD(0x418, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD16__EMI_DRAM_D_16 IOMUX_PAD(0x41c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD17__EMI_DRAM_D_17 IOMUX_PAD(0x420, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD18__EMI_DRAM_D_18 IOMUX_PAD(0x424, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD19__EMI_DRAM_D_19 IOMUX_PAD(0x428, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD20__EMI_DRAM_D_20 IOMUX_PAD(0x42c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD21__EMI_DRAM_D_21 IOMUX_PAD(0x430, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD22__EMI_DRAM_D_22 IOMUX_PAD(0x434, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD23__EMI_DRAM_D_23 IOMUX_PAD(0x438, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD24__EMI_DRAM_D_24 IOMUX_PAD(0x43c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD25__EMI_DRAM_D_25 IOMUX_PAD(0x440, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD26__EMI_DRAM_D_26 IOMUX_PAD(0x444, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD27__EMI_DRAM_D_27 IOMUX_PAD(0x448, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD28__EMI_DRAM_D_28 IOMUX_PAD(0x44c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD29__EMI_DRAM_D_29 IOMUX_PAD(0x450, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD30__EMI_DRAM_D_30 IOMUX_PAD(0x454, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD31__EMI_DRAM_D_31 IOMUX_PAD(0x458, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM0__EMI_DRAM_DQM_0 IOMUX_PAD(0x45c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM1__EMI_DRAM_DQM_1 IOMUX_PAD(0x460, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM2__EMI_DRAM_DQM_2 IOMUX_PAD(0x464, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM3__EMI_DRAM_DQM_3 IOMUX_PAD(0x468, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB0__EMI_EIM_EB0_B IOMUX_PAD(0x46c, 0x094, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB1__EMI_EIM_EB1_B IOMUX_PAD(0x470, 0x098, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_OE__EMI_EIM_OE IOMUX_PAD(0x474, 0x09c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS0__EMI_EIM_CS0 IOMUX_PAD(0x478, 0x0a0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS1__EMI_EIM_CS1 IOMUX_PAD(0x47c, 0x0a4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS1__EMI_NANDF_CE3 IOMUX_PAD(0x47c, 0x0a4, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS2__EMI_EIM_CS2 IOMUX_PAD(0x480, 0x0a8, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS3__EMI_EIM_CS3 IOMUX_PAD(0x484, 0x0ac, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS4__EMI_EIM_CS4 IOMUX_PAD(0x488, 0x0b0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_DTACK_B IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_NANDF_CE1 IOMUX_PAD(0x488, 0x0b0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__GPIO1_20 IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS5__EMI_EIM_CS5 IOMUX_PAD(0x48c, 0x0b4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI2_SS2 IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI1_SS2 IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_CS5__EMI_NANDF_CE2 IOMUX_PAD(0x48c, 0x0b4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__GPIO1_21 IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NF_CE0__EMI_NANDF_CE0 IOMUX_PAD(0x490, 0x0b8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NF_CE0__GPIO1_22 IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ECB__EMI_EIM_ECB IOMUX_PAD(0x494, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LBA__EMI_EIM_LBA IOMUX_PAD(0x498, 0x0bc, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BCLK__EMI_EIM_BCLK IOMUX_PAD(0x49c, 0x0c0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RW__EMI_EIM_RW IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RAS__EMI_DRAM_RAS IOMUX_PAD(0x4a4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CAS__EMI_DRAM_CAS IOMUX_PAD(0x4a8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDWE__EMI_DRAM_SDWE IOMUX_PAD(0x4ac, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 IOMUX_PAD(0x4b0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 IOMUX_PAD(0x4b4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK IOMUX_PAD(0x4b8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 IOMUX_PAD(0x4bc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 IOMUX_PAD(0x4c0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 IOMUX_PAD(0x4c4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 IOMUX_PAD(0x4c8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__GPIO2_18 IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__GPIO2_19 IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFALE__EMI_NANDF_ALE IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__USB_TOP_USBH2_STP IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__IPU_DISPB_CS0 IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__GPIO2_20 IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFCLE__EMI_NANDF_CLE IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__GPIO2_21 IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__IPU_DISPB_WR IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__GPIO2_22 IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRB__EMI_NANDF_RB IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__IPU_DISPB_RD IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__GPIO2_23 IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D15__EMI_EIM_D_15 IOMUX_PAD(0x4e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D14__EMI_EIM_D_14 IOMUX_PAD(0x4e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D13__EMI_EIM_D_13 IOMUX_PAD(0x4ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D12__EMI_EIM_D_12 IOMUX_PAD(0x4f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D11__EMI_EIM_D_11 IOMUX_PAD(0x4f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D10__EMI_EIM_D_10 IOMUX_PAD(0x4f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D9__EMI_EIM_D_9 IOMUX_PAD(0x4fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D8__EMI_EIM_D_8 IOMUX_PAD(0x500, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D7__EMI_EIM_D_7 IOMUX_PAD(0x504, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D6__EMI_EIM_D_6 IOMUX_PAD(0x508, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D5__EMI_EIM_D_5 IOMUX_PAD(0x50c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D4__EMI_EIM_D_4 IOMUX_PAD(0x510, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3__EMI_EIM_D_3 IOMUX_PAD(0x514, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D2__EMI_EIM_D_2 IOMUX_PAD(0x518, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D1__EMI_EIM_D_1 IOMUX_PAD(0x51c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D0__EMI_EIM_D_0 IOMUX_PAD(0x520, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D8__IPU_CSI_D_8 IOMUX_PAD(0x524, 0x0e0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__KPP_COL_0 IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__GPIO1_20 IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 IOMUX_PAD(0x524, 0x0e0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D9__IPU_CSI_D_9 IOMUX_PAD(0x528, 0x0e4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__KPP_COL_1 IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__GPIO1_21 IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 IOMUX_PAD(0x528, 0x0e4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D10__IPU_CSI_D_10 IOMUX_PAD(0x52c, 0x0e8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__KPP_COL_2 IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__GPIO1_22 IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 IOMUX_PAD(0x52c, 0x0e8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D11__IPU_CSI_D_11 IOMUX_PAD(0x530, 0x0ec, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__KPP_COL_3 IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__GPIO1_23 IOMUX_PAD(0x530, 0x0ec, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D12__IPU_CSI_D_12 IOMUX_PAD(0x534, 0x0f0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__KPP_ROW_0 IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__GPIO1_24 IOMUX_PAD(0x534, 0x0f0, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D13__IPU_CSI_D_13 IOMUX_PAD(0x538, 0x0f4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__KPP_ROW_1 IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__GPIO1_25 IOMUX_PAD(0x538, 0x0f4, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D14__IPU_CSI_D_14 IOMUX_PAD(0x53c, 0x0f8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__KPP_ROW_2 IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__GPIO1_26 IOMUX_PAD(0x53c, 0x0f8, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D15__IPU_CSI_D_15 IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__KPP_ROW_3 IOMUX_PAD(0x540, 0x0fc, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__GPIO1_27 IOMUX_PAD(0x540, 0x0fc, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK IOMUX_PAD(0x544, 0x100, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_MCLK__GPIO1_28 IOMUX_PAD(0x544, 0x100, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC IOMUX_PAD(0x548, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_VSYNC__GPIO1_29 IOMUX_PAD(0x548, 0x104, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC IOMUX_PAD(0x54c, 0x108, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_HSYNC__GPIO1_30 IOMUX_PAD(0x54c, 0x108, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK IOMUX_PAD(0x550, 0x10c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_PIXCLK__GPIO1_31 IOMUX_PAD(0x550, 0x10c, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_CLK__I2C1_SCL IOMUX_PAD(0x554, 0x110, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__GPIO2_24 IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK IOMUX_PAD(0x554, 0x110, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_DAT__I2C1_SDA IOMUX_PAD(0x558, 0x114, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_DAT__GPIO2_25 IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_CLK__I2C2_SCL IOMUX_PAD(0x55c, 0x118, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__CAN1_TXCAN IOMUX_PAD(0x55c, 0x118, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR IOMUX_PAD(0x55c, 0x118, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__GPIO2_26 IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x55c, 0x118, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_DAT__I2C2_SDA IOMUX_PAD(0x560, 0x11c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__CAN1_RXCAN IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__GPIO2_27 IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x560, 0x11c, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD IOMUX_PAD(0x564, 0x120, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__GPIO2_28 IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 IOMUX_PAD(0x564, 0x120, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD IOMUX_PAD(0x568, 0x124, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__GPIO2_29 IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 IOMUX_PAD(0x568, 0x124, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC IOMUX_PAD(0x56c, 0x128, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__GPIO2_30 IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 IOMUX_PAD(0x56c, 0x128, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS IOMUX_PAD(0x570, 0x12c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__GPIO2_31 IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 IOMUX_PAD(0x570, 0x12c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD IOMUX_PAD(0x574, 0x130, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x574, 0x130, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__CSPI2_MOSI IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__GPIO1_0 IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 IOMUX_PAD(0x574, 0x130, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD IOMUX_PAD(0x578, 0x134, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__CSPI2_MISO IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__GPIO1_1 IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 IOMUX_PAD(0x578, 0x134, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC IOMUX_PAD(0x57c, 0x138, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__CSPI2_SCLK IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__GPIO1_2 IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 IOMUX_PAD(0x57c, 0x138, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS IOMUX_PAD(0x580, 0x13c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__CSPI2_RDY IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__GPIO1_3 IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 IOMUX_PAD(0x580, 0x13c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKR__ESAI_SCKR IOMUX_PAD(0x584, 0x140, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__GPIO1_4 IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 IOMUX_PAD(0x584, 0x140, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FSR__ESAI_FSR IOMUX_PAD(0x588, 0x144, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FSR__GPIO1_5 IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL)
+#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 IOMUX_PAD(0x588, 0x144, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKR__ESAI_HCKR IOMUX_PAD(0x58c, 0x148, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS IOMUX_PAD(0x58c, 0x148, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__CSPI2_SS0 IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__IPU_FLASH_STROBE IOMUX_PAD(0x58c, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__GPIO1_6 IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 IOMUX_PAD(0x58c, 0x148, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKT__ESAI_SCKT IOMUX_PAD(0x590, 0x14c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__GPIO1_7 IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__IPU_CSI_D_0 IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__KPP_ROW_2 IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FST__ESAI_FST IOMUX_PAD(0x594, 0x150, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FST__GPIO1_8 IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL)
+#define MX35_PAD_FST__IPU_CSI_D_1 IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL)
+#define MX35_PAD_FST__KPP_ROW_3 IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKT__ESAI_HCKT IOMUX_PAD(0x598, 0x154, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__GPIO1_9 IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__IPU_CSI_D_2 IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__KPP_COL_3 IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0 IOMUX_PAD(0x59c, 0x158, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC IOMUX_PAD(0x59c, 0x158, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CSPI2_SS2 IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CAN2_TXCAN IOMUX_PAD(0x59c, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__UART2_DTR IOMUX_PAD(0x59c, 0x158, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__GPIO1_10 IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 IOMUX_PAD(0x59c, 0x158, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1 IOMUX_PAD(0x5a0, 0x15c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS IOMUX_PAD(0x5a0, 0x15c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CSPI2_SS3 IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CAN2_RXCAN IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__UART2_DSR IOMUX_PAD(0x5a0, 0x15c, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__GPIO1_11 IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__IPU_CSI_D_3 IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__KPP_ROW_0 IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2 IOMUX_PAD(0x5a4, 0x160, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__I2C3_SCL IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1 IOMUX_PAD(0x5a4, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__GPIO1_12 IOMUX_PAD(0x5a4, 0x160, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__IPU_CSI_D_4 IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__KPP_ROW_1 IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3 IOMUX_PAD(0x5a8, 0x164, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__I2C3_SDA IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2 IOMUX_PAD(0x5a8, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__GPIO1_13 IOMUX_PAD(0x5a8, 0x164, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__IPU_CSI_D_5 IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__KPP_COL_0 IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX1__ESAI_TX1 IOMUX_PAD(0x5ac, 0x168, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CCM_PMIC_RDY IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CSPI1_SS2 IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL)
+#define MX35_PAD_TX1__EMI_NANDF_CE3 IOMUX_PAD(0x5ac, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__UART2_RI IOMUX_PAD(0x5ac, 0x168, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__GPIO1_14 IOMUX_PAD(0x5ac, 0x168, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__IPU_CSI_D_6 IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__KPP_COL_1 IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX0__ESAI_TX0 IOMUX_PAD(0x5b0, 0x16c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__CSPI1_SS3 IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__EMI_DTACK_B IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__UART2_DCD IOMUX_PAD(0x5b0, 0x16c, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__GPIO1_15 IOMUX_PAD(0x5b0, 0x16c, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__IPU_CSI_D_7 IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__KPP_COL_2 IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x5b4, 0x170, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__GPIO1_16 IOMUX_PAD(0x5b4, 0x170, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 IOMUX_PAD(0x5b4, 0x170, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x5b8, 0x174, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__GPIO1_17 IOMUX_PAD(0x5b8, 0x174, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 IOMUX_PAD(0x5b8, 0x174, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x5bc, 0x178, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__OWIRE_LINE IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__CSPI2_SS3 IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__GPIO1_18 IOMUX_PAD(0x5bc, 0x178, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 IOMUX_PAD(0x5bc, 0x178, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x5c0, 0x17c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__PWM_PWMO IOMUX_PAD(0x5c0, 0x17c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__CCM_CLK32K IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__GPIO1_19 IOMUX_PAD(0x5c0, 0x17c, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 IOMUX_PAD(0x5c0, 0x17c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 IOMUX_PAD(0x5c0, 0x17c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x5c4, 0x180, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__GPIO3_4 IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 IOMUX_PAD(0x5c4, 0x180, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 IOMUX_PAD(0x5c4, 0x180, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY IOMUX_PAD(0x5c8, 0x184, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 IOMUX_PAD(0x5c8, 0x184, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 IOMUX_PAD(0x5c8, 0x184, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD1__UART1_RXD_MUX IOMUX_PAD(0x5cc, 0x188, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__CSPI2_MOSI IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__KPP_COL_4 IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__GPIO3_6 IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 IOMUX_PAD(0x5cc, 0x188, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD1__UART1_TXD_MUX IOMUX_PAD(0x5d0, 0x18c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__CSPI2_MISO IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__KPP_COL_5 IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__GPIO3_7 IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 IOMUX_PAD(0x5d0, 0x18c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS1__UART1_RTS IOMUX_PAD(0x5d4, 0x190, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__CSPI2_SCLK IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__I2C3_SCL IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__IPU_CSI_D_0 IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__KPP_COL_6 IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__GPIO3_8 IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__EMI_NANDF_CE1 IOMUX_PAD(0x5d4, 0x190, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 IOMUX_PAD(0x5d4, 0x190, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS1__UART1_CTS IOMUX_PAD(0x5d8, 0x194, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__CSPI2_RDY IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__I2C3_SDA IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__IPU_CSI_D_1 IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__KPP_COL_7 IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__GPIO3_9 IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__EMI_NANDF_CE2 IOMUX_PAD(0x5d8, 0x194, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 IOMUX_PAD(0x5d8, 0x194, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD2__UART2_RXD_MUX IOMUX_PAD(0x5dc, 0x198, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__KPP_ROW_4 IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__GPIO3_10 IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD2__UART2_TXD_MUX IOMUX_PAD(0x5e0, 0x19c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__KPP_ROW_5 IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__GPIO3_11 IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS2__UART2_RTS IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1 IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__CAN2_RXCAN IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__IPU_CSI_D_2 IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__KPP_ROW_6 IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__GPIO3_12 IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__UART3_RXD_MUX IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS2__UART2_CTS IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__CAN2_TXCAN IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__IPU_CSI_D_3 IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__KPP_ROW_7 IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__GPIO3_13 IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__UART3_TXD_MUX IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTCK__ARM11P_TOP_RTCK IOMUX_PAD(0x5ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TCK__SJC_TCK IOMUX_PAD(0x5f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TMS__SJC_TMS IOMUX_PAD(0x5f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDI__SJC_TDI IOMUX_PAD(0x5f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDO__SJC_TDO IOMUX_PAD(0x5fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TRSTB__SJC_TRSTB IOMUX_PAD(0x600, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DE_B__SJC_DE_B IOMUX_PAD(0x604, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SJC_MOD__SJC_MOD IOMUX_PAD(0x608, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR IOMUX_PAD(0x60c, 0x1a8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR IOMUX_PAD(0x60c, 0x1a8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__GPIO3_14 IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC IOMUX_PAD(0x610, 0x1ac, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__GPIO3_15 IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD0__IPU_DISPB_DAT_0 IOMUX_PAD(0x614, 0x1b0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD0__GPIO2_0 IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 IOMUX_PAD(0x614, 0x1b0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD1__IPU_DISPB_DAT_1 IOMUX_PAD(0x618, 0x1b4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__GPIO2_1 IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 IOMUX_PAD(0x618, 0x1b4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD2__IPU_DISPB_DAT_2 IOMUX_PAD(0x61c, 0x1b8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__GPIO2_2 IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 IOMUX_PAD(0x61c, 0x1b8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD3__IPU_DISPB_DAT_3 IOMUX_PAD(0x620, 0x1bc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__GPIO2_3 IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 IOMUX_PAD(0x620, 0x1bc, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD4__IPU_DISPB_DAT_4 IOMUX_PAD(0x624, 0x1c0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__GPIO2_4 IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 IOMUX_PAD(0x624, 0x1c0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD5__IPU_DISPB_DAT_5 IOMUX_PAD(0x628, 0x1c4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__GPIO2_5 IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 IOMUX_PAD(0x628, 0x1c4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD6__IPU_DISPB_DAT_6 IOMUX_PAD(0x62c, 0x1c8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__GPIO2_6 IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 IOMUX_PAD(0x62c, 0x1c8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD7__IPU_DISPB_DAT_7 IOMUX_PAD(0x630, 0x1cc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__GPIO2_7 IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 IOMUX_PAD(0x630, 0x1cc, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD8__IPU_DISPB_DAT_8 IOMUX_PAD(0x634, 0x1d0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__GPIO2_8 IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD9__IPU_DISPB_DAT_9 IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4 0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD10__IPU_DISPB_DAT_10 IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__GPIO2_10 IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 IOMUX_PAD(0x63c, 0x1d8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD11__IPU_DISPB_DAT_11 IOMUX_PAD(0x640, 0x1dc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__GPIO2_11 IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 IOMUX_PAD(0x640, 0x1dc, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4 IOMUX_PAD(0x640, 0x1dc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD12__IPU_DISPB_DAT_12 IOMUX_PAD(0x644, 0x1e0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__GPIO2_12 IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 IOMUX_PAD(0x644, 0x1e0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5 IOMUX_PAD(0x644, 0x1e0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD13__IPU_DISPB_DAT_13 IOMUX_PAD(0x648, 0x1e4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__GPIO2_13 IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 IOMUX_PAD(0x648, 0x1e4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6 IOMUX_PAD(0x648, 0x1e4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD14__IPU_DISPB_DAT_14 IOMUX_PAD(0x64c, 0x1e8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__GPIO2_14 IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x64c, 0x1e8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7 IOMUX_PAD(0x64c, 0x1e8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD15__IPU_DISPB_DAT_15 IOMUX_PAD(0x650, 0x1ec, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__GPIO2_15 IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x650, 0x1ec, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8 IOMUX_PAD(0x650, 0x1ec, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD16__IPU_DISPB_DAT_16 IOMUX_PAD(0x654, 0x1f0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__GPIO2_16 IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x654, 0x1f0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9 IOMUX_PAD(0x654, 0x1f0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD17__IPU_DISPB_DAT_17 IOMUX_PAD(0x658, 0x1f4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__IPU_DISPB_CS2 IOMUX_PAD(0x658, 0x1f4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__GPIO2_17 IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 IOMUX_PAD(0x658, 0x1f4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10 IOMUX_PAD(0x658, 0x1f4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD18__IPU_DISPB_DAT_18 IOMUX_PAD(0x65c, 0x1f8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ESDHC3_CMD IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__GPIO3_24 IOMUX_PAD(0x65c, 0x1f8, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 IOMUX_PAD(0x65c, 0x1f8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11 IOMUX_PAD(0x65c, 0x1f8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD19__IPU_DISPB_DAT_19 IOMUX_PAD(0x660, 0x1fc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_BCLK IOMUX_PAD(0x660, 0x1fc, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_CS1 IOMUX_PAD(0x660, 0x1fc, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ESDHC3_CLK IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__GPIO3_25 IOMUX_PAD(0x660, 0x1fc, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 IOMUX_PAD(0x660, 0x1fc, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12 IOMUX_PAD(0x660, 0x1fc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD20__IPU_DISPB_DAT_20 IOMUX_PAD(0x664, 0x200, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_CS0 IOMUX_PAD(0x664, 0x200, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_SD_CLK IOMUX_PAD(0x664, 0x200, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ESDHC3_DAT0 IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__GPIO3_26 IOMUX_PAD(0x664, 0x200, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 IOMUX_PAD(0x664, 0x200, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13 IOMUX_PAD(0x664, 0x200, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD21__IPU_DISPB_DAT_21 IOMUX_PAD(0x668, 0x204, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_PAR_RS IOMUX_PAD(0x668, 0x204, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_SER_RS IOMUX_PAD(0x668, 0x204, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ESDHC3_DAT1 IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__USB_TOP_USBOTG_STP IOMUX_PAD(0x668, 0x204, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__GPIO3_27 IOMUX_PAD(0x668, 0x204, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL IOMUX_PAD(0x668, 0x204, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14 IOMUX_PAD(0x668, 0x204, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD22__IPU_DISPB_DAT_22 IOMUX_PAD(0x66c, 0x208, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_WR IOMUX_PAD(0x66c, 0x208, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_SD_D_I IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ESDHC3_DAT2 IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__GPIO3_28 IOMUX_PAD(0x66c, 0x208, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x66c, 0x208, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ARM11P_TOP_TRCTL IOMUX_PAD(0x66c, 0x208, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD23__IPU_DISPB_DAT_23 IOMUX_PAD(0x670, 0x20c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_RD IOMUX_PAD(0x670, 0x20c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ESDHC3_DAT3 IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__GPIO3_29 IOMUX_PAD(0x670, 0x20c, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x670, 0x20c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ARM11P_TOP_TRCLK IOMUX_PAD(0x670, 0x20c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC IOMUX_PAD(0x674, 0x210, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__GPIO3_30 IOMUX_PAD(0x674, 0x210, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x674, 0x210, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 IOMUX_PAD(0x674, 0x210, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK IOMUX_PAD(0x678, 0x214, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK IOMUX_PAD(0x678, 0x214, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__GPIO3_31 IOMUX_PAD(0x678, 0x214, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 IOMUX_PAD(0x678, 0x214, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 IOMUX_PAD(0x678, 0x214, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY IOMUX_PAD(0x67c, 0x218, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O IOMUX_PAD(0x67c, 0x218, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__GPIO1_0 IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 IOMUX_PAD(0x67c, 0x218, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 IOMUX_PAD(0x67c, 0x218, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR IOMUX_PAD(0x680, 0x21c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__GPIO1_1 IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 IOMUX_PAD(0x680, 0x21c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 IOMUX_PAD(0x680, 0x21c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC IOMUX_PAD(0x684, 0x220, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 IOMUX_PAD(0x684, 0x220, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__GPIO1_2 IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD IOMUX_PAD(0x684, 0x220, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 IOMUX_PAD(0x684, 0x220, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV IOMUX_PAD(0x688, 0x224, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS IOMUX_PAD(0x688, 0x224, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__GPIO1_3 IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x688, 0x224, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 IOMUX_PAD(0x688, 0x224, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS IOMUX_PAD(0x68c, 0x228, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__IPU_DISPB_CS2 IOMUX_PAD(0x68c, 0x228, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__GPIO1_4 IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x68c, 0x228, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 IOMUX_PAD(0x68c, 0x228, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL IOMUX_PAD(0x690, 0x22c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__GPIO1_5 IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x690, 0x22c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 IOMUX_PAD(0x690, 0x22c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x694, 0x230, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__MSHC_SCLK IOMUX_PAD(0x694, 0x230, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__GPIO1_6 IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL IOMUX_PAD(0x694, 0x230, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x698, 0x234, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__MSHC_BS IOMUX_PAD(0x698, 0x234, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK IOMUX_PAD(0x698, 0x234, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__GPIO1_7 IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK IOMUX_PAD(0x698, 0x234, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x69c, 0x238, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__MSHC_DATA_0 IOMUX_PAD(0x69c, 0x238, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 IOMUX_PAD(0x69c, 0x238, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__GPIO1_8 IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 IOMUX_PAD(0x69c, 0x238, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x6a0, 0x23c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__MSHC_DATA_1 IOMUX_PAD(0x6a0, 0x23c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS IOMUX_PAD(0x6a0, 0x23c, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__GPIO1_9 IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 IOMUX_PAD(0x6a0, 0x23c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x6a4, 0x240, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__MSHC_DATA_2 IOMUX_PAD(0x6a4, 0x240, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR IOMUX_PAD(0x6a4, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__GPIO1_10 IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 IOMUX_PAD(0x6a4, 0x240, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x6a8, 0x244, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__MSHC_DATA_3 IOMUX_PAD(0x6a8, 0x244, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD IOMUX_PAD(0x6a8, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__GPIO1_11 IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 IOMUX_PAD(0x6a8, 0x244, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x6ac, 0x248, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__I2C3_SCL IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__ESDHC1_DAT4 IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_CSI_D_2 IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__GPIO2_0 IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x6ac, 0x248, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x6b0, 0x24c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__I2C3_SDA IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__ESDHC1_DAT5 IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_CSI_D_3 IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__GPIO2_1 IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2 IOMUX_PAD(0x6b0, 0x24c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x6b4, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6 IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4 IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__GPIO2_2 IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x6b8, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX IOMUX_PAD(0x6b8, 0x254, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7 IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5 IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__GPIO2_3 IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x6bc, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__UART3_RTS IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__CAN1_RXCAN IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6 IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__GPIO2_4 IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x6c0, 0x25c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__UART3_CTS IOMUX_PAD(0x6c0, 0x25c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__CAN1_TXCAN IOMUX_PAD(0x6c0, 0x25c, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7 IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__GPIO2_5 IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS0__ATA_CS0 IOMUX_PAD(0x6c4, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__CSPI1_SS3 IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1 IOMUX_PAD(0x6c4, 0x260, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__GPIO2_6 IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DIAGB_0 IOMUX_PAD(0x6c4, 0x260, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 IOMUX_PAD(0x6c4, 0x260, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS1__ATA_CS1 IOMUX_PAD(0x6c8, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2 IOMUX_PAD(0x6c8, 0x264, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__CSPI2_SS0 IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__GPIO2_7 IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DIAGB_1 IOMUX_PAD(0x6c8, 0x264, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 IOMUX_PAD(0x6c8, 0x264, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOR__ATA_DIOR IOMUX_PAD(0x6cc, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0 IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 IOMUX_PAD(0x6cc, 0x268, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__CSPI2_SS1 IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__GPIO2_8 IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2 IOMUX_PAD(0x6cc, 0x268, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 IOMUX_PAD(0x6cc, 0x268, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOW__ATA_DIOW IOMUX_PAD(0x6d0, 0x26c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1 IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP IOMUX_PAD(0x6d0, 0x26c, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 IOMUX_PAD(0x6d0, 0x26c, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__CSPI2_MOSI IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__GPIO2_9 IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3 IOMUX_PAD(0x6d0, 0x26c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 IOMUX_PAD(0x6d0, 0x26c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMACK__ATA_DMACK IOMUX_PAD(0x6d4, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2 IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__CSPI2_MISO IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__GPIO2_10 IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4 IOMUX_PAD(0x6d4, 0x270, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 IOMUX_PAD(0x6d4, 0x270, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_RESET_B__ATA_RESET_B IOMUX_PAD(0x6d8, 0x274, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O IOMUX_PAD(0x6d8, 0x274, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__CSPI2_RDY IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__GPIO2_11 IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 IOMUX_PAD(0x6d8, 0x274, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 IOMUX_PAD(0x6d8, 0x274, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_IORDY__ATA_IORDY IOMUX_PAD(0x6dc, 0x278, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4 IOMUX_PAD(0x6dc, 0x278, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4 IOMUX_PAD(0x6dc, 0x278, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__GPIO2_12 IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6 IOMUX_PAD(0x6dc, 0x278, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 IOMUX_PAD(0x6dc, 0x278, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA0__ATA_DATA_0 IOMUX_PAD(0x6e0, 0x27c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5 IOMUX_PAD(0x6e0, 0x27c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5 IOMUX_PAD(0x6e0, 0x27c, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__GPIO2_13 IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7 IOMUX_PAD(0x6e0, 0x27c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 IOMUX_PAD(0x6e0, 0x27c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA1__ATA_DATA_1 IOMUX_PAD(0x6e4, 0x280, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6 IOMUX_PAD(0x6e4, 0x280, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK IOMUX_PAD(0x6e4, 0x280, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6 IOMUX_PAD(0x6e4, 0x280, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__GPIO2_14 IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8 IOMUX_PAD(0x6e4, 0x280, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 IOMUX_PAD(0x6e4, 0x280, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA2__ATA_DATA_2 IOMUX_PAD(0x6e8, 0x284, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7 IOMUX_PAD(0x6e8, 0x284, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS IOMUX_PAD(0x6e8, 0x284, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7 IOMUX_PAD(0x6e8, 0x284, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__GPIO2_15 IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9 IOMUX_PAD(0x6e8, 0x284, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 IOMUX_PAD(0x6e8, 0x284, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA3__ATA_DATA_3 IOMUX_PAD(0x6e8, 0x288, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ESDHC3_CLK IOMUX_PAD(0x6e8, 0x288, 1, 0x814, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x6e8, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__CSPI2_SCLK IOMUX_PAD(0x6e8, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__GPIO2_16 IOMUX_PAD(0x6e8, 0x288, 5, 0x884, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10 IOMUX_PAD(0x6e8, 0x288, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 IOMUX_PAD(0x6e8, 0x288, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA4__ATA_DATA_4 IOMUX_PAD(0x6f0, 0x28c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ESDHC3_CMD IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__GPIO2_17 IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11 IOMUX_PAD(0x6f0, 0x28c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 IOMUX_PAD(0x6f0, 0x28c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA5__ATA_DATA_5 IOMUX_PAD(0x6f4, 0x290, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__GPIO2_18 IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12 IOMUX_PAD(0x6f4, 0x290, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 IOMUX_PAD(0x6f4, 0x290, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA6__ATA_DATA_6 IOMUX_PAD(0x6f8, 0x294, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__CAN1_TXCAN IOMUX_PAD(0x6f8, 0x294, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__UART1_DTR IOMUX_PAD(0x6f8, 0x294, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__GPIO2_19 IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13 IOMUX_PAD(0x6f8, 0x294, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA7__ATA_DATA_7 IOMUX_PAD(0x6fc, 0x298, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__CAN1_RXCAN IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__UART1_DSR IOMUX_PAD(0x6fc, 0x298, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__GPIO2_20 IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14 IOMUX_PAD(0x6fc, 0x298, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA8__ATA_DATA_8 IOMUX_PAD(0x700, 0x29c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART3_RTS IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART1_RI IOMUX_PAD(0x700, 0x29c, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__GPIO2_21 IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15 IOMUX_PAD(0x700, 0x29c, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA9__ATA_DATA_9 IOMUX_PAD(0x704, 0x2a0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART3_CTS IOMUX_PAD(0x704, 0x2a0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART1_DCD IOMUX_PAD(0x704, 0x2a0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__GPIO2_22 IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16 IOMUX_PAD(0x704, 0x2a0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA10__ATA_DATA_10 IOMUX_PAD(0x708, 0x2a4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__GPIO2_23 IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17 IOMUX_PAD(0x708, 0x2a4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA11__ATA_DATA_11 IOMUX_PAD(0x70c, 0x2a8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX IOMUX_PAD(0x70c, 0x2a8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__GPIO2_24 IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18 IOMUX_PAD(0x70c, 0x2a8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA12__ATA_DATA_12 IOMUX_PAD(0x710, 0x2ac, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__I2C3_SCL IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__GPIO2_25 IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19 IOMUX_PAD(0x710, 0x2ac, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA13__ATA_DATA_13 IOMUX_PAD(0x714, 0x2b0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__I2C3_SDA IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__GPIO2_26 IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20 IOMUX_PAD(0x714, 0x2b0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA14__ATA_DATA_14 IOMUX_PAD(0x718, 0x2b4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0 IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__KPP_ROW_0 IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__GPIO2_27 IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21 IOMUX_PAD(0x718, 0x2b4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA15__ATA_DATA_15 IOMUX_PAD(0x71c, 0x2b8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1 IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__KPP_ROW_1 IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__GPIO2_28 IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22 IOMUX_PAD(0x71c, 0x2b8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_INTRQ__ATA_INTRQ IOMUX_PAD(0x720, 0x2bc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__KPP_ROW_2 IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__GPIO2_29 IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 IOMUX_PAD(0x720, 0x2bc, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN IOMUX_PAD(0x724, 0x2c0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__GPIO2_30 IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 IOMUX_PAD(0x724, 0x2c0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMARQ__ATA_DMARQ IOMUX_PAD(0x728, 0x2c4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__KPP_COL_0 IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__GPIO2_31 IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 IOMUX_PAD(0x728, 0x2c4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 IOMUX_PAD(0x728, 0x2c4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA0__ATA_DA_0 IOMUX_PAD(0x72c, 0x2c8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_CSI_D_5 IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__KPP_COL_1 IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__GPIO3_0 IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_DIAGB_26 IOMUX_PAD(0x72c, 0x2c8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 IOMUX_PAD(0x72c, 0x2c8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA1__ATA_DA_1 IOMUX_PAD(0x730, 0x2cc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_CSI_D_6 IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__KPP_COL_2 IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__GPIO3_1 IOMUX_PAD(0x730, 0x2cc, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_DIAGB_27 IOMUX_PAD(0x730, 0x2cc, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 IOMUX_PAD(0x730, 0x2cc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA2__ATA_DA_2 IOMUX_PAD(0x734, 0x2d0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_CSI_D_7 IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__KPP_COL_3 IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__GPIO3_2 IOMUX_PAD(0x734, 0x2d0, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_DIAGB_28 IOMUX_PAD(0x734, 0x2d0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 IOMUX_PAD(0x734, 0x2d0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_CLK__MLB_MLBCLK IOMUX_PAD(0x738, 0x2d4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_CLK__GPIO3_3 IOMUX_PAD(0x738, 0x2d4, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_DAT__MLB_MLBDAT IOMUX_PAD(0x73c, 0x2d8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_DAT__GPIO3_4 IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_SIG__MLB_MLBSIG IOMUX_PAD(0x740, 0x2dc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_SIG__GPIO3_5 IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x744, 0x2e0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__GPIO3_6 IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 IOMUX_PAD(0x744, 0x2e0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK IOMUX_PAD(0x748, 0x2e4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX IOMUX_PAD(0x748, 0x2e4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP IOMUX_PAD(0x748, 0x2e4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__GPIO3_7 IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 IOMUX_PAD(0x748, 0x2e4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x74c, 0x2e8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__UART3_RTS IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__GPIO3_8 IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK IOMUX_PAD(0x74c, 0x2e8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 IOMUX_PAD(0x74c, 0x2e8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_COL__FEC_COL IOMUX_PAD(0x750, 0x2ec, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ESDHC1_DAT7 IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__UART3_CTS IOMUX_PAD(0x750, 0x2ec, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__CSPI2_RDY IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__GPIO3_9 IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS IOMUX_PAD(0x750, 0x2ec, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 IOMUX_PAD(0x750, 0x2ec, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0 IOMUX_PAD(0x754, 0x2f0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__PWM_PWMO IOMUX_PAD(0x754, 0x2f0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__UART3_DTR IOMUX_PAD(0x754, 0x2f0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__CSPI2_SS0 IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__GPIO3_10 IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 IOMUX_PAD(0x754, 0x2f0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 IOMUX_PAD(0x754, 0x2f0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0 IOMUX_PAD(0x758, 0x2f4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x758, 0x2f4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__UART3_DSR IOMUX_PAD(0x758, 0x2f4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__CSPI2_SS1 IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__GPIO3_11 IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 IOMUX_PAD(0x758, 0x2f4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 IOMUX_PAD(0x758, 0x2f4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x75c, 0x2f8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__UART3_RI IOMUX_PAD(0x75c, 0x2f8, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__GPIO3_12 IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS IOMUX_PAD(0x75c, 0x2f8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 IOMUX_PAD(0x75c, 0x2f8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x760, 0x2fc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__CAN2_TXCAN IOMUX_PAD(0x760, 0x2fc, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__UART3_DCD IOMUX_PAD(0x760, 0x2fc, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__GPIO3_13 IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__IPU_DISPB_WR IOMUX_PAD(0x760, 0x2fc, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 IOMUX_PAD(0x760, 0x2fc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x764, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__CAN2_RXCAN IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__GPIO3_14 IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD IOMUX_PAD(0x764, 0x300, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 IOMUX_PAD(0x764, 0x300, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR IOMUX_PAD(0x768, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__GPIO3_15 IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 IOMUX_PAD(0x768, 0x304, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR IOMUX_PAD(0x76c, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__KPP_COL_4 IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__GPIO3_16 IOMUX_PAD(0x76c, 0x308, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_CRS__FEC_CRS IOMUX_PAD(0x770, 0x30c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_CSI_D_1 IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR IOMUX_PAD(0x770, 0x30c, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__KPP_COL_5 IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__GPIO3_17 IOMUX_PAD(0x770, 0x30c, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE IOMUX_PAD(0x770, 0x30c, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1 IOMUX_PAD(0x774, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC IOMUX_PAD(0x774, 0x310, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__KPP_COL_6 IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__GPIO3_18 IOMUX_PAD(0x774, 0x310, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 IOMUX_PAD(0x774, 0x310, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1 IOMUX_PAD(0x778, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__KPP_COL_7 IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__GPIO3_19 IOMUX_PAD(0x778, 0x314, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 IOMUX_PAD(0x778, 0x314, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2 IOMUX_PAD(0x77c, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__KPP_ROW_4 IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__GPIO3_20 IOMUX_PAD(0x77c, 0x318, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2 IOMUX_PAD(0x780, 0x31c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__KPP_ROW_5 IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__GPIO3_21 IOMUX_PAD(0x780, 0x31c, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3 IOMUX_PAD(0x784, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__KPP_ROW_6 IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__GPIO3_22 IOMUX_PAD(0x784, 0x320, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3 IOMUX_PAD(0x788, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__KPP_ROW_7 IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__GPIO3_23 IOMUX_PAD(0x788, 0x324, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK IOMUX_PAD(0x78c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TEST_MODE__TCU_TEST_MODE IOMUX_PAD(0x790, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+
+#endif /* __MACH_IOMUX_MX35_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
new file mode 100644
index 0000000..7cd8454
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_V3_H__
+#define __MACH_IOMUX_V3_H__
+
+/*
+ * build IOMUX_PAD structure
+ *
+ * This iomux scheme is based around pads, which are the physical balls
+ * on the processor.
+ *
+ * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
+ * things like driving strength and pullup/pulldown.
+ * - Each pad can have but not necessarily does have an output routing register
+ * (IOMUXC_SW_MUX_CTL_PAD_x).
+ * - Each pad can have but not necessarily does have an input routing register
+ * (IOMUXC_x_SELECT_INPUT)
+ *
+ * The three register sets do not have a fixed offset to each other,
+ * hence we order this table by pad control registers (which all pads
+ * have) and put the optional i/o routing registers into additional
+ * fields.
+ *
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num>
+ *
+ */
+
+struct pad_desc {
+ unsigned mux_ctrl_ofs:12; /* IOMUXC_SW_MUX_CTL_PAD offset */
+ unsigned mux_mode:8;
+ unsigned pad_ctrl_ofs:12; /* IOMUXC_SW_PAD_CTRL offset */
+#define NO_PAD_CTRL (1 << 16)
+ unsigned pad_ctrl:17;
+ unsigned select_input_ofs:12; /* IOMUXC_SELECT_INPUT offset */
+ unsigned select_input:3;
+};
+
+#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \
+ _select_input, _pad_ctrl) \
+ { \
+ .mux_ctrl_ofs = _mux_ctrl_ofs, \
+ .mux_mode = _mux_mode, \
+ .pad_ctrl_ofs = _pad_ctrl_ofs, \
+ .pad_ctrl = _pad_ctrl, \
+ .select_input_ofs = _select_input_ofs, \
+ .select_input = _select_input, \
+ }
+
+/*
+ * Use to set PAD control
+ */
+#define PAD_CTL_DRIVE_VOLTAGE_3_3_V 0
+#define PAD_CTL_DRIVE_VOLTAGE_1_8_V 1
+
+#define PAD_CTL_NO_HYSTERESIS 0
+#define PAD_CTL_HYSTERESIS 1
+
+#define PAD_CTL_PULL_DISABLED 0x0
+#define PAD_CTL_PULL_KEEPER 0xa
+#define PAD_CTL_PULL_DOWN_100K 0xc
+#define PAD_CTL_PULL_UP_47K 0xd
+#define PAD_CTL_PULL_UP_100K 0xe
+#define PAD_CTL_PULL_UP_22K 0xf
+
+#define PAD_CTL_OUTPUT_CMOS 0
+#define PAD_CTL_OUTPUT_OPEN_DRAIN 1
+
+#define PAD_CTL_DRIVE_STRENGTH_NORM 0
+#define PAD_CTL_DRIVE_STRENGTH_HIGH 1
+#define PAD_CTL_DRIVE_STRENGTH_MAX 2
+
+#define PAD_CTL_SLEW_RATE_SLOW 0
+#define PAD_CTL_SLEW_RATE_FAST 1
+
+/*
+ * setups a single pad:
+ * - reserves the pad so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
+
+/*
+ * setups mutliple pads
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count);
+
+/*
+ * releases a single pad:
+ * - make it available for a future use by another driver
+ * - DOES NOT reconfigure the IOMUX in its reset state
+ */
+void mxc_iomux_v3_release_pad(struct pad_desc *pad);
+
+/*
+ * releases multiple pads
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
+
+#endif /* __MACH_IOMUX_V3_H__*/
+
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index eca37d09f..6065e00 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -32,4 +32,12 @@
#define CONSISTENT_DMA_SIZE SZ_4M
#endif /* CONFIG_MX1_VIDEO */
+#if defined(CONFIG_MX3_VIDEO)
+/*
+ * Increase size of DMA-consistent memory region.
+ * This is required for mx3 camera driver to capture at least two QXGA frames.
+ */
+#define CONSISTENT_DMA_SIZE SZ_8M
+#endif /* CONFIG_MX3_VIDEO */
+
#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index b92e023..1000bf3 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -179,7 +179,7 @@
#define DMA_REQ_UART1_T 30
#define DMA_REQ_UART1_R 31
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 3878c60..b559a4b 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -48,6 +48,9 @@
#define CS4_SIZE SZ_32M
#define CS5_BASE_ADDR 0xB6000000
+#define CS5_BASE_ADDR_VIRT 0xF6000000
+#define CS5_SIZE SZ_32M
+
#define PCMCIA_MEM_BASE_ADDR 0xBC000000
/*
@@ -191,6 +194,9 @@
#define CS4_IO_ADDRESS(x) \
(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+#define CS5_IO_ADDRESS(x) \
+ (((x) - CS5_BASE_ADDR) + CS5_BASE_ADDR_VIRT)
+
#define X_MEMC_IO_ADDRESS(x) \
(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h
deleted file mode 100644
index 6c19a13..0000000
--- a/arch/arm/plat-mxc/include/mach/mxc_timer.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * mxc_timer.h
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef __PLAT_MXC_TIMER_H
-#define __PLAT_MXC_TIMER_H
-
-#include <linux/clk.h>
-#include <mach/hardware.h>
-
-#ifdef CONFIG_ARCH_MX1
-#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR)
-#define TIMER_INTERRUPT TIM1_INT
-
-#define TCTL_VAL TCTL_CLK_PCLK1
-#define TCTL_IRQEN (1<<4)
-#define TCTL_FRR (1<<8)
-#define TCTL_CLK_PCLK1 (1<<1)
-#define TCTL_CLK_PCLK1_4 (2<<1)
-#define TCTL_CLK_TIN (3<<1)
-#define TCTL_CLK_32 (4<<1)
-
-#define MXC_TCTL 0x00
-#define MXC_TPRER 0x04
-#define MXC_TCMP 0x08
-#define MXC_TCR 0x0c
-#define MXC_TCN 0x10
-#define MXC_TSTAT 0x14
-#define TSTAT_CAPT (1<<1)
-#define TSTAT_COMP (1<<0)
-
-static inline void gpt_irq_disable(void)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
- __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
- __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
- TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
- __raw_writel(0, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX1 */
-
-#ifdef CONFIG_ARCH_MX2
-#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT MXC_INT_GPT1
-
-#define MXC_TCTL 0x00
-#define TCTL_VAL TCTL_CLK_PCLK1
-#define TCTL_CLK_PCLK1 (1<<1)
-#define TCTL_CLK_PCLK1_4 (2<<1)
-#define TCTL_IRQEN (1<<4)
-#define TCTL_FRR (1<<8)
-#define MXC_TPRER 0x04
-#define MXC_TCMP 0x08
-#define MXC_TCR 0x0c
-#define MXC_TCN 0x10
-#define MXC_TSTAT 0x14
-#define TSTAT_CAPT (1<<1)
-#define TSTAT_COMP (1<<0)
-
-static inline void gpt_irq_disable(void)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
- __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
- __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
- TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
- __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX2 */
-
-#ifdef CONFIG_ARCH_MX3
-#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT MXC_INT_GPT
-
-#define MXC_TCTL 0x00
-#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN)
-#define TCTL_CLK_IPG (1<<6)
-#define TCTL_FRR (1<<9)
-#define TCTL_WAITEN (1<<3)
-
-#define MXC_TPRER 0x04
-#define MXC_TSTAT 0x08
-#define TSTAT_OF1 (1<<0)
-#define TSTAT_OF2 (1<<1)
-#define TSTAT_OF3 (1<<2)
-#define TSTAT_IF1 (1<<3)
-#define TSTAT_IF2 (1<<4)
-#define TSTAT_ROV (1<<5)
-#define MXC_IR 0x0c
-#define MXC_TCMP 0x10
-#define MXC_TCMP2 0x14
-#define MXC_TCMP3 0x18
-#define MXC_TCR 0x1c
-#define MXC_TCN 0x24
-
-static inline void gpt_irq_disable(void)
-{
- __raw_writel(0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_enable(void)
-{
- __raw_writel(1<<0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_acknowledge(void)
-{
- __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX3 */
-
-#define TCTL_SWR (1<<15)
-#define TCTL_CC (1<<10)
-#define TCTL_OM (1<<9)
-#define TCTL_CAP_RIS (1<<6)
-#define TCTL_CAP_FAL (2<<6)
-#define TCTL_CAP_RIS_FAL (3<<6)
-#define TCTL_CAP_ENA (1<<5)
-#define TCTL_TEN (1<<0)
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/usb.h b/arch/arm/plat-mxc/include/mach/usb.h
index 2dacb308..be27337 100644
--- a/arch/arm/plat-mxc/include/mach/usb.h
+++ b/arch/arm/plat-mxc/include/mach/usb.h
@@ -17,7 +17,7 @@
struct imxusb_platform_data {
int (*init)(struct device *);
- int (*exit)(struct device *);
+ void (*exit)(struct device *);
};
#endif /* __ASM_ARCH_MXC_USB */
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
new file mode 100644
index 0000000..77a078f
--- /dev/null
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+#include <mach/iomux-v3.h>
+
+#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR)
+
+static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
+
+/*
+ * setups a single pin:
+ * - reserves the pin so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
+{
+ unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+ if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
+ return -EBUSY;
+ if (pad->mux_ctrl_ofs)
+ __raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs);
+
+ if (pad->select_input_ofs)
+ __raw_writel(pad->select_input,
+ IOMUX_BASE + pad->select_input_ofs);
+
+ if (!(pad->pad_ctrl & NO_PAD_CTRL))
+ __raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs);
+ return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
+
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count)
+{
+ struct pad_desc *p = pad_list;
+ int i;
+ int ret;
+
+ for (i = 0; i < count; i++) {
+ ret = mxc_iomux_v3_setup_pad(p);
+ if (ret)
+ goto setup_error;
+ p++;
+ }
+ return 0;
+
+setup_error:
+ mxc_iomux_v3_release_multiple_pads(pad_list, i);
+ return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
+
+void mxc_iomux_v3_release_pad(struct pad_desc *pad)
+{
+ unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+ clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_pad);
+
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
+{
+ struct pad_desc *p = pad_list;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ mxc_iomux_v3_release_pad(p);
+ p++;
+ }
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 0fb68a5..8aee763 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -24,31 +24,27 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR)
-#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */
-#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */
-#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */
-#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */
-#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */
-#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */
-#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */
-#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */
-#define AVIC_NIPRIORITY(x) (AVIC_BASE + (0x20 + 4 * (7 - (x)))) /* int priority */
-#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */
-#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */
-#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */
-#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */
-#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */
-#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */
-#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */
-#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */
-#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */
-#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */
-
-#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20)
-#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24)
-#define IIM_PROD_REV_SH 3
-#define IIM_PROD_REV_LEN 5
+#define AVIC_INTCNTL 0x00 /* int control reg */
+#define AVIC_NIMASK 0x04 /* int mask reg */
+#define AVIC_INTENNUM 0x08 /* int enable number reg */
+#define AVIC_INTDISNUM 0x0C /* int disable number reg */
+#define AVIC_INTENABLEH 0x10 /* int enable reg high */
+#define AVIC_INTENABLEL 0x14 /* int enable reg low */
+#define AVIC_INTTYPEH 0x18 /* int type reg high */
+#define AVIC_INTTYPEL 0x1C /* int type reg low */
+#define AVIC_NIPRIORITY(x) (0x20 + 4 * (7 - (x))) /* int priority */
+#define AVIC_NIVECSR 0x40 /* norm int vector/status */
+#define AVIC_FIVECSR 0x44 /* fast int vector/status */
+#define AVIC_INTSRCH 0x48 /* int source reg high */
+#define AVIC_INTSRCL 0x4C /* int source reg low */
+#define AVIC_INTFRCH 0x50 /* int force reg high */
+#define AVIC_INTFRCL 0x54 /* int force reg low */
+#define AVIC_NIPNDH 0x58 /* norm int pending high */
+#define AVIC_NIPNDL 0x5C /* norm int pending low */
+#define AVIC_FIPNDH 0x60 /* fast int pending high */
+#define AVIC_FIPNDL 0x64 /* fast int pending low */
+
+static void __iomem *avic_base;
int imx_irq_set_priority(unsigned char irq, unsigned char prio)
{
@@ -59,11 +55,11 @@ int imx_irq_set_priority(unsigned char irq, unsigned char prio)
if (irq >= MXC_INTERNAL_IRQS)
return -EINVAL;;
- temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
+ temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8));
temp &= ~mask;
temp |= prio & mask;
- __raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+ __raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8));
return 0;
#else
@@ -81,12 +77,12 @@ int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
return -EINVAL;
if (irq < MXC_INTERNAL_IRQS / 2) {
- irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq);
- __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL);
+ irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
+ __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
} else {
irq -= MXC_INTERNAL_IRQS / 2;
- irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq);
- __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH);
+ irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
+ __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
}
return 0;
@@ -97,13 +93,13 @@ EXPORT_SYMBOL(mxc_set_irq_fiq);
/* Disable interrupt number "irq" in the AVIC */
static void mxc_mask_irq(unsigned int irq)
{
- __raw_writel(irq, AVIC_INTDISNUM);
+ __raw_writel(irq, avic_base + AVIC_INTDISNUM);
}
/* Enable interrupt number "irq" in the AVIC */
static void mxc_unmask_irq(unsigned int irq)
{
- __raw_writel(irq, AVIC_INTENNUM);
+ __raw_writel(irq, avic_base + AVIC_INTENNUM);
}
static struct irq_chip mxc_avic_chip = {
@@ -121,19 +117,21 @@ void __init mxc_init_irq(void)
{
int i;
+ avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
+
/* put the AVIC into the reset value with
* all interrupts disabled
*/
- __raw_writel(0, AVIC_INTCNTL);
- __raw_writel(0x1f, AVIC_NIMASK);
+ __raw_writel(0, avic_base + AVIC_INTCNTL);
+ __raw_writel(0x1f, avic_base + AVIC_NIMASK);
/* disable all interrupts */
- __raw_writel(0, AVIC_INTENABLEH);
- __raw_writel(0, AVIC_INTENABLEL);
+ __raw_writel(0, avic_base + AVIC_INTENABLEH);
+ __raw_writel(0, avic_base + AVIC_INTENABLEL);
/* all IRQ no FIQ */
- __raw_writel(0, AVIC_INTTYPEH);
- __raw_writel(0, AVIC_INTTYPEL);
+ __raw_writel(0, avic_base + AVIC_INTTYPEH);
+ __raw_writel(0, avic_base + AVIC_INTTYPEL);
for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
set_irq_chip(i, &mxc_avic_chip);
set_irq_handler(i, handle_level_irq);
@@ -142,7 +140,7 @@ void __init mxc_init_irq(void)
/* Set default priority value (0) for all IRQ's */
for (i = 0; i < 8; i++)
- __raw_writel(0, AVIC_NIPRIORITY(i));
+ __raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
/* init architectures chained interrupt handler */
mxc_register_gpios();
@@ -154,3 +152,4 @@ void __init mxc_init_irq(void)
printk(KERN_INFO "MXC IRQ initialized\n");
}
+
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 9bffbc5..ae34198 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -15,65 +15,26 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/pwm.h>
+#include <mach/hardware.h>
+
+
+/* i.MX1 and i.MX21 share the same PWM function block: */
+
+#define MX1_PWMC 0x00 /* PWM Control Register */
+#define MX1_PWMS 0x04 /* PWM Sample Register */
+#define MX1_PWMP 0x08 /* PWM Period Register */
+
+
+/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
+
+#define MX3_PWMCR 0x00 /* PWM Control Register */
+#define MX3_PWMSAR 0x0C /* PWM Sample Register */
+#define MX3_PWMPR 0x10 /* PWM Period Register */
+#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_EN (1 << 0)
+
-#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21
-#define PWM_VER_1
-
-#define PWMCR 0x00 /* PWM Control Register */
-#define PWMSR 0x04 /* PWM Sample Register */
-#define PWMPR 0x08 /* PWM Period Register */
-#define PWMCNR 0x0C /* PWM Counter Register */
-
-#define PWMCR_HCTR (1 << 18) /* Halfword FIFO Data Swapping */
-#define PWMCR_BCTR (1 << 17) /* Byte FIFO Data Swapping */
-#define PWMCR_SWR (1 << 16) /* Software Reset */
-#define PWMCR_CLKSRC_PERCLK (0 << 15) /* PERCLK Clock Source */
-#define PWMCR_CLKSRC_CLK32 (1 << 15) /* 32KHz Clock Source */
-#define PWMCR_PRESCALER(x) (((x - 1) & 0x7F) << 8) /* PRESCALER */
-#define PWMCR_IRQ (1 << 7) /* Interrupt Request */
-#define PWMCR_IRQEN (1 << 6) /* Interrupt Request Enable */
-#define PWMCR_FIFOAV (1 << 5) /* FIFO Available */
-#define PWMCR_EN (1 << 4) /* Enables/Disables the PWM */
-#define PWMCR_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */
-#define PWMCR_DIV(x) (((x) & 0x03) << 0) /* Clock divider 2/4/8/16 */
-
-#define MAX_DIV (128 * 16)
-#endif
-
-#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31
-#define PWM_VER_2
-
-#define PWMCR 0x00 /* PWM Control Register */
-#define PWMSR 0x04 /* PWM Status Register */
-#define PWMIR 0x08 /* PWM Interrupt Register */
-#define PWMSAR 0x0C /* PWM Sample Register */
-#define PWMPR 0x10 /* PWM Period Register */
-#define PWMCNR 0x14 /* PWM Counter Register */
-
-#define PWMCR_EN (1 << 0) /* Enables/Disables the PWM */
-#define PWMCR_REPEAT(x) (((x) & 0x03) << 1) /* Sample Repeats */
-#define PWMCR_SWR (1 << 3) /* Software Reset */
-#define PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)/* PRESCALER */
-#define PWMCR_CLKSRC(x) (((x) & 0x3) << 16)
-#define PWMCR_CLKSRC_OFF (0 << 16)
-#define PWMCR_CLKSRC_IPG (1 << 16)
-#define PWMCR_CLKSRC_IPG_HIGH (2 << 16)
-#define PWMCR_CLKSRC_CLK32 (3 << 16)
-#define PWMCR_POUTC
-#define PWMCR_HCTR (1 << 20) /* Halfword FIFO Data Swapping */
-#define PWMCR_BCTR (1 << 21) /* Byte FIFO Data Swapping */
-#define PWMCR_DBGEN (1 << 22) /* Debug Mode */
-#define PWMCR_WAITEN (1 << 23) /* Wait Mode */
-#define PWMCR_DOZEN (1 << 24) /* Doze Mode */
-#define PWMCR_STOPEN (1 << 25) /* Stop Mode */
-#define PWMCR_FWM(x) (((x) & 0x3) << 26) /* FIFO Water Mark */
-
-#define MAX_DIV 4096
-#endif
-
-#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */
-#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */
-#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */
struct pwm_device {
struct list_head node;
@@ -91,32 +52,52 @@ struct pwm_device {
int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
{
- unsigned long long c;
- unsigned long period_cycles, duty_cycles, prescale;
-
if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
return -EINVAL;
- c = clk_get_rate(pwm->clk);
- c = c * period_ns;
- do_div(c, 1000000000);
- period_cycles = c;
-
- prescale = period_cycles / 0x10000 + 1;
-
- period_cycles /= prescale;
- c = (unsigned long long)period_cycles * duty_ns;
- do_div(c, period_ns);
- duty_cycles = c;
-
-#ifdef PWM_VER_2
- writel(duty_cycles, pwm->mmio_base + PWMSAR);
- writel(period_cycles, pwm->mmio_base + PWMPR);
- writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN,
- pwm->mmio_base + PWMCR);
-#elif defined PWM_VER_1
-#error PWM not yet working on MX1 / MX21
-#endif
+ if (cpu_is_mx27() || cpu_is_mx3()) {
+ unsigned long long c;
+ unsigned long period_cycles, duty_cycles, prescale;
+ c = clk_get_rate(pwm->clk);
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ prescale = period_cycles / 0x10000 + 1;
+
+ period_cycles /= prescale;
+ c = (unsigned long long)period_cycles * duty_ns;
+ do_div(c, period_ns);
+ duty_cycles = c;
+
+ writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
+ writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
+ writel(MX3_PWMCR_PRESCALER(prescale - 1) |
+ MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
+ pwm->mmio_base + MX3_PWMCR);
+ } else if (cpu_is_mx1() || cpu_is_mx21()) {
+ /* The PWM subsystem allows for exact frequencies. However,
+ * I cannot connect a scope on my device to the PWM line and
+ * thus cannot provide the program the PWM controller
+ * exactly. Instead, I'm relying on the fact that the
+ * Bootloader (u-boot or WinCE+haret) has programmed the PWM
+ * function group already. So I'll just modify the PWM sample
+ * register to follow the ratio of duty_ns vs. period_ns
+ * accordingly.
+ *
+ * This is good enought for programming the brightness of
+ * the LCD backlight.
+ *
+ * The real implementation would divide PERCLK[0] first by
+ * both the prescaler (/1 .. /128) and then by CLKSEL
+ * (/2 .. /16).
+ */
+ u32 max = readl(pwm->mmio_base + MX1_PWMP);
+ u32 p = max * duty_ns / period_ns;
+ writel(max - p, pwm->mmio_base + MX1_PWMS);
+ } else {
+ BUG();
+ }
return 0;
}
@@ -297,4 +278,3 @@ module_exit(mxc_pwm_exit);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
-
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index dab3357..88fb3a5 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -29,22 +29,85 @@
#include <mach/hardware.h>
#include <asm/mach/time.h>
#include <mach/common.h>
-#include <mach/mxc_timer.h>
+
+/* defines common for all i.MX */
+#define MXC_TCTL 0x00
+#define MXC_TCTL_TEN (1 << 0)
+#define MXC_TPRER 0x04
+
+/* MX1, MX21, MX27 */
+#define MX1_2_TCTL_CLK_PCLK1 (1 << 1)
+#define MX1_2_TCTL_IRQEN (1 << 4)
+#define MX1_2_TCTL_FRR (1 << 8)
+#define MX1_2_TCMP 0x08
+#define MX1_2_TCN 0x10
+#define MX1_2_TSTAT 0x14
+
+/* MX21, MX27 */
+#define MX2_TSTAT_CAPT (1 << 1)
+#define MX2_TSTAT_COMP (1 << 0)
+
+/* MX31, MX35 */
+#define MX3_TCTL_WAITEN (1 << 3)
+#define MX3_TCTL_CLK_IPG (1 << 6)
+#define MX3_TCTL_FRR (1 << 9)
+#define MX3_IR 0x0c
+#define MX3_TSTAT 0x08
+#define MX3_TSTAT_OF1 (1 << 0)
+#define MX3_TCN 0x24
+#define MX3_TCMP 0x10
static struct clock_event_device clockevent_mxc;
static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-/* clock source */
+static void __iomem *timer_base;
-static cycle_t mxc_get_cycles(struct clocksource *cs)
+static inline void gpt_irq_disable(void)
{
- return __raw_readl(TIMER_BASE + MXC_TCN);
+ unsigned int tmp;
+
+ if (cpu_is_mx3())
+ __raw_writel(0, timer_base + MX3_IR);
+ else {
+ tmp = __raw_readl(timer_base + MXC_TCTL);
+ __raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
+ }
+}
+
+static inline void gpt_irq_enable(void)
+{
+ if (cpu_is_mx3())
+ __raw_writel(1<<0, timer_base + MX3_IR);
+ else {
+ __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
+ timer_base + MXC_TCTL);
+ }
+}
+
+static void gpt_irq_acknowledge(void)
+{
+ if (cpu_is_mx1())
+ __raw_writel(0, timer_base + MX1_2_TSTAT);
+ if (cpu_is_mx2())
+ __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
+ if (cpu_is_mx3())
+ __raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
+}
+
+static cycle_t mx1_2_get_cycles(struct clocksource *cs)
+{
+ return __raw_readl(timer_base + MX1_2_TCN);
+}
+
+static cycle_t mx3_get_cycles(struct clocksource *cs)
+{
+ return __raw_readl(timer_base + MX3_TCN);
}
static struct clocksource clocksource_mxc = {
.name = "mxc_timer1",
.rating = 200,
- .read = mxc_get_cycles,
+ .read = mx1_2_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
.shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
@@ -54,6 +117,9 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
+ if (cpu_is_mx3())
+ clocksource_mxc.read = mx3_get_cycles;
+
clocksource_mxc.mult = clocksource_hz2mult(c,
clocksource_mxc.shift);
clocksource_register(&clocksource_mxc);
@@ -63,15 +129,29 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
/* clock event */
-static int mxc_set_next_event(unsigned long evt,
+static int mx1_2_set_next_event(unsigned long evt,
struct clock_event_device *unused)
{
unsigned long tcmp;
- tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt;
- __raw_writel(tcmp, TIMER_BASE + MXC_TCMP);
+ tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt;
- return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ?
+ __raw_writel(tcmp, timer_base + MX1_2_TCMP);
+
+ return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ?
+ -ETIME : 0;
+}
+
+static int mx3_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long tcmp;
+
+ tcmp = __raw_readl(timer_base + MX3_TCN) + evt;
+
+ __raw_writel(tcmp, timer_base + MX3_TCMP);
+
+ return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ?
-ETIME : 0;
}
@@ -100,8 +180,13 @@ static void mxc_set_mode(enum clock_event_mode mode,
if (mode != clockevent_mode) {
/* Set event time into far-far future */
- __raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3,
- TIMER_BASE + MXC_TCMP);
+ if (cpu_is_mx3())
+ __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
+ timer_base + MX3_TCMP);
+ else
+ __raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
+ timer_base + MX1_2_TCMP);
+
/* Clear pending interrupt */
gpt_irq_acknowledge();
}
@@ -148,7 +233,10 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
struct clock_event_device *evt = &clockevent_mxc;
uint32_t tstat;
- tstat = __raw_readl(TIMER_BASE + MXC_TSTAT);
+ if (cpu_is_mx3())
+ tstat = __raw_readl(timer_base + MX3_TSTAT);
+ else
+ tstat = __raw_readl(timer_base + MX1_2_TSTAT);
gpt_irq_acknowledge();
@@ -168,7 +256,7 @@ static struct clock_event_device clockevent_mxc = {
.features = CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.set_mode = mxc_set_mode,
- .set_next_event = mxc_set_next_event,
+ .set_next_event = mx1_2_set_next_event,
.rating = 200,
};
@@ -176,6 +264,9 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
+ if (cpu_is_mx3())
+ clockevent_mxc.set_next_event = mx3_set_next_event;
+
clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
clockevent_mxc.shift);
clockevent_mxc.max_delta_ns =
@@ -192,23 +283,47 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
void __init mxc_timer_init(struct clk *timer_clk)
{
+ uint32_t tctl_val;
+ int irq;
+
clk_enable(timer_clk);
+ if (cpu_is_mx1()) {
+#ifdef CONFIG_ARCH_MX1
+ timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
+ irq = TIM1_INT;
+#endif
+ } else if (cpu_is_mx2()) {
+#ifdef CONFIG_ARCH_MX2
+ timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+ irq = MXC_INT_GPT1;
+#endif
+ } else if (cpu_is_mx3()) {
+#ifdef CONFIG_ARCH_MX3
+ timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+ irq = MXC_INT_GPT;
+#endif
+ } else
+ BUG();
+
/*
* Initialise to a known state (all timers off, and timing reset)
*/
- __raw_writel(0, TIMER_BASE + MXC_TCTL);
- __raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */
- __raw_writel(TCTL_FRR | /* free running */
- TCTL_VAL | /* set clocksource and arch specific bits */
- TCTL_TEN, /* start the timer */
- TIMER_BASE + MXC_TCTL);
+ __raw_writel(0, timer_base + MXC_TCTL);
+ __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
+
+ if (cpu_is_mx3())
+ tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
+ else
+ tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
+
+ __raw_writel(tctl_val, timer_base + MXC_TCTL);
/* init and register the timer to the framework */
mxc_clocksource_init(timer_clk);
mxc_clockevent_init(timer_clk);
/* Make irqs happen */
- setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
+ setup_irq(irq, &mxc_timer_irq);
}
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 9dd68fa..efe85d0 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -23,6 +23,11 @@ config ARCH_OMAP3
select CPU_V7
select COMMON_CLKDEV
+config ARCH_OMAP4
+ bool "TI OMAP4"
+ select CPU_V7
+ select ARM_GIC
+
endchoice
comment "OMAP Feature Selections"
@@ -40,7 +45,6 @@ config OMAP_DEBUG_LEDS
config OMAP_DEBUG_POWERDOMAIN
bool "Emit debug messages from powerdomain layer"
depends on ARCH_OMAP2 || ARCH_OMAP3
- default n
help
Say Y here if you want to compile in powerdomain layer
debugging messages for OMAP2/3. These messages can
@@ -52,7 +56,6 @@ config OMAP_DEBUG_POWERDOMAIN
config OMAP_DEBUG_CLOCKDOMAIN
bool "Emit debug messages from clockdomain layer"
depends on ARCH_OMAP2 || ARCH_OMAP3
- default n
help
Say Y here if you want to compile in clockdomain layer
debugging messages for OMAP2/3. These messages can
@@ -110,11 +113,13 @@ config OMAP_MCBSP
config OMAP_MBOX_FWK
tristate "Mailbox framework support"
depends on ARCH_OMAP
- default n
help
Say Y here if you want to use OMAP Mailbox framework support for
DSP, IVA1.0 and IVA2 in OMAP1/2/3.
+config OMAP_IOMMU
+ tristate
+
choice
prompt "System timer"
default OMAP_MPU_TIMER
@@ -128,13 +133,13 @@ config OMAP_MPU_TIMER
config OMAP_32K_TIMER
bool "Use 32KHz timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
help
Select this option if you want to enable the OMAP 32KHz timer.
This timer saves power compared to the OMAP_MPU_TIMER, and has
support for no tick during idle. The 32KHz timer provides less
intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
- currently only available for OMAP16XX, 24XX and 34XX.
+ currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
endchoice
@@ -149,7 +154,7 @@ config OMAP_32K_TIMER_HZ
config OMAP_DM_TIMER
bool "Use dual-mode timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
help
Select this option if you want to use OMAP Dual-Mode timers.
@@ -171,7 +176,7 @@ endchoice
config OMAP_SERIAL_WAKE
bool "Enable wake-up events for serial ports"
- depends on OMAP_MUX
+ depends on ARCH_OMAP1 && OMAP_MUX
default y
help
Select this option if you want to have your system wake up
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 04a100c..a832795 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -13,6 +13,7 @@ obj- :=
obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 29efc27..e8c327a 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -36,10 +36,40 @@ static struct clk_functions *arch_clock;
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
+/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since
+ * clock framework is not up , it is defined here to avoid rework in
+ * every driver. Also dummy prcm reset function is added */
+
+/* Dummy hooks only for OMAP4.For rest OMAPs, common clkdev is used */
+#if defined(CONFIG_ARCH_OMAP4)
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ return NULL;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+void omap2_clk_prepare_for_reboot(void)
+{
+}
+EXPORT_SYMBOL(omap2_clk_prepare_for_reboot);
+
+void omap_prcm_arch_reset(char mode)
+{
+}
+EXPORT_SYMBOL(omap_prcm_arch_reset);
+#endif
int clk_enable(struct clk *clk)
{
unsigned long flags;
int ret = 0;
+ if (cpu_is_omap44xx())
+ /* OMAP4 clk framework not supported yet */
+ return 0;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
@@ -140,6 +170,9 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
unsigned long flags;
int ret = -EINVAL;
+ if (cpu_is_omap44xx())
+ /* OMAP4 clk framework not supported yet */
+ return 0;
if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
return ret;
@@ -240,13 +273,13 @@ void recalculate_root_clocks(void)
}
/**
- * clk_init_one - initialize any fields in the struct clk before clk init
+ * clk_preinit - initialize any fields in the struct clk before clk init
* @clk: struct clk * to initialize
*
* Initialize any struct clk fields needed before normal clk initialization
* can run. No return value.
*/
-void clk_init_one(struct clk *clk)
+void clk_preinit(struct clk *clk)
{
INIT_LIST_HEAD(&clk->children);
}
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 433021f..ebcf0064 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -2,6 +2,10 @@
* linux/arch/arm/plat-omap/common.c
*
* Code common to all OMAP machines.
+ * The file is created by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -11,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <linux/pm.h>
#include <linux/console.h>
#include <linux/serial.h>
#include <linux/tty.h>
@@ -175,25 +178,70 @@ console_initcall(omap_add_serial_console);
* but systems won't necessarily want to spend resources that way.
*/
-#if defined(CONFIG_ARCH_OMAP16XX)
-#define TIMER_32K_SYNCHRONIZED 0xfffbc410
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-#define TIMER_32K_SYNCHRONIZED (OMAP2_32KSYNCT_BASE + 0x10)
-#endif
+#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410
-#ifdef TIMER_32K_SYNCHRONIZED
+#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
#include <linux/clocksource.h>
-static cycle_t omap_32k_read(struct clocksource *cs)
+#ifdef CONFIG_ARCH_OMAP16XX
+static cycle_t omap16xx_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED);
+}
+#else
+#define omap16xx_32k_read NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2420
+static cycle_t omap2420_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap2420_32k_read NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+static cycle_t omap2430_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap2430_32k_read NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static cycle_t omap34xx_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap34xx_32k_read NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static cycle_t omap44xx_32k_read(struct clocksource *cs)
{
- return omap_readl(TIMER_32K_SYNCHRONIZED);
+ return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap44xx_32k_read NULL
+#endif
+
+/*
+ * Kernel assumes that sched_clock can be called early but may not have
+ * things ready yet.
+ */
+static cycle_t omap_32k_read_dummy(struct clocksource *cs)
+{
+ return 0;
}
static struct clocksource clocksource_32k = {
.name = "32k_counter",
.rating = 250,
- .read = omap_32k_read,
+ .read = omap_32k_read_dummy,
.mask = CLOCKSOURCE_MASK(32),
.shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
@@ -207,7 +255,7 @@ unsigned long long sched_clock(void)
{
unsigned long long ret;
- ret = (unsigned long long)omap_32k_read(&clocksource_32k);
+ ret = (unsigned long long)clocksource_32k.read(&clocksource_32k);
ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
return ret;
}
@@ -220,6 +268,19 @@ static int __init omap_init_clocksource_32k(void)
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
struct clk *sync_32k_ick;
+ if (cpu_is_omap16xx())
+ clocksource_32k.read = omap16xx_32k_read;
+ else if (cpu_is_omap2420())
+ clocksource_32k.read = omap2420_32k_read;
+ else if (cpu_is_omap2430())
+ clocksource_32k.read = omap2430_32k_read;
+ else if (cpu_is_omap34xx())
+ clocksource_32k.read = omap34xx_32k_read;
+ else if (cpu_is_omap44xx())
+ clocksource_32k.read = omap44xx_32k_read;
+ else
+ return -ENODEV;
+
sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
if (sync_32k_ick)
clk_enable(sync_32k_ick);
@@ -234,15 +295,13 @@ static int __init omap_init_clocksource_32k(void)
}
arch_initcall(omap_init_clocksource_32k);
-#endif /* TIMER_32K_SYNCHRONIZED */
+#endif /* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
/* Global address base setup code */
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-static struct omap_globals *omap2_globals;
-
-static void __init __omap2_set_globals(void)
+static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
{
omap2_set_globals_tap(omap2_globals);
omap2_set_globals_sdrc(omap2_globals);
@@ -266,8 +325,7 @@ static struct omap_globals omap242x_globals = {
void __init omap2_set_globals_242x(void)
{
- omap2_globals = &omap242x_globals;
- __omap2_set_globals();
+ __omap2_set_globals(&omap242x_globals);
}
#endif
@@ -285,8 +343,7 @@ static struct omap_globals omap243x_globals = {
void __init omap2_set_globals_243x(void)
{
- omap2_globals = &omap243x_globals;
- __omap2_set_globals();
+ __omap2_set_globals(&omap243x_globals);
}
#endif
@@ -304,8 +361,23 @@ static struct omap_globals omap343x_globals = {
void __init omap2_set_globals_343x(void)
{
- omap2_globals = &omap343x_globals;
- __omap2_set_globals();
+ __omap2_set_globals(&omap343x_globals);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static struct omap_globals omap4_globals = {
+ .class = OMAP443X_CLASS,
+ .tap = OMAP2_IO_ADDRESS(0x4830a000),
+ .ctrl = OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE),
+ .prm = OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE),
+ .cm = OMAP2_IO_ADDRESS(OMAP4430_CM_BASE),
+};
+
+void __init omap2_set_globals_443x(void)
+{
+ omap2_set_globals_tap(&omap4_globals);
+ omap2_set_globals_control(&omap4_globals);
}
#endif
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 87fb7ff..a64b692 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -311,6 +311,8 @@ static void omap_init_wdt(void)
wdt_resources[0].start = 0x49016000; /* WDT2 */
else if (cpu_is_omap343x())
wdt_resources[0].start = 0x48314000; /* WDT2 */
+ else if (cpu_is_omap44xx())
+ wdt_resources[0].start = 0x4a314000;
else
return;
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7fc8c04..def14ec 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -10,6 +10,9 @@
* Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
* Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* Support functions for the OMAP internal DMA channels.
*
* This program is free software; you can redistribute it and/or modify
@@ -310,41 +313,62 @@ EXPORT_SYMBOL(omap_set_dma_transfer_params);
void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
{
- u16 w;
-
BUG_ON(omap_dma_in_1510_mode());
- if (cpu_class_is_omap2()) {
- REVISIT_24XX();
- return;
- }
+ if (cpu_class_is_omap1()) {
+ u16 w;
- w = dma_read(CCR2(lch));
- w &= ~0x03;
+ w = dma_read(CCR2(lch));
+ w &= ~0x03;
- switch (mode) {
- case OMAP_DMA_CONSTANT_FILL:
- w |= 0x01;
- break;
- case OMAP_DMA_TRANSPARENT_COPY:
- w |= 0x02;
- break;
- case OMAP_DMA_COLOR_DIS:
- break;
- default:
- BUG();
+ switch (mode) {
+ case OMAP_DMA_CONSTANT_FILL:
+ w |= 0x01;
+ break;
+ case OMAP_DMA_TRANSPARENT_COPY:
+ w |= 0x02;
+ break;
+ case OMAP_DMA_COLOR_DIS:
+ break;
+ default:
+ BUG();
+ }
+ dma_write(w, CCR2(lch));
+
+ w = dma_read(LCH_CTRL(lch));
+ w &= ~0x0f;
+ /* Default is channel type 2D */
+ if (mode) {
+ dma_write((u16)color, COLOR_L(lch));
+ dma_write((u16)(color >> 16), COLOR_U(lch));
+ w |= 1; /* Channel type G */
+ }
+ dma_write(w, LCH_CTRL(lch));
}
- dma_write(w, CCR2(lch));
- w = dma_read(LCH_CTRL(lch));
- w &= ~0x0f;
- /* Default is channel type 2D */
- if (mode) {
- dma_write((u16)color, COLOR_L(lch));
- dma_write((u16)(color >> 16), COLOR_U(lch));
- w |= 1; /* Channel type G */
+ if (cpu_class_is_omap2()) {
+ u32 val;
+
+ val = dma_read(CCR(lch));
+ val &= ~((1 << 17) | (1 << 16));
+
+ switch (mode) {
+ case OMAP_DMA_CONSTANT_FILL:
+ val |= 1 << 16;
+ break;
+ case OMAP_DMA_TRANSPARENT_COPY:
+ val |= 1 << 17;
+ break;
+ case OMAP_DMA_COLOR_DIS:
+ break;
+ default:
+ BUG();
+ }
+ dma_write(val, CCR(lch));
+
+ color &= 0xffffff;
+ dma_write(color, COLOR(lch));
}
- dma_write(w, LCH_CTRL(lch));
}
EXPORT_SYMBOL(omap_set_dma_color_mode);
@@ -851,7 +875,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio,
}
l = dma_read(CCR(lch));
l &= ~((1 << 6) | (1 << 26));
- if (cpu_is_omap2430() || cpu_is_omap34xx())
+ if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
else
l |= ((read_prio & 0x1) << 6);
@@ -1199,7 +1223,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
* Failure: -EINVAL/-ENOMEM
*/
int omap_request_dma_chain(int dev_id, const char *dev_name,
- void (*callback) (int chain_id, u16 ch_status,
+ void (*callback) (int lch, u16 ch_status,
void *data),
int *chain_id, int no_of_chans, int chain_mode,
struct omap_dma_channel_params params)
@@ -1823,7 +1847,8 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
#define omap1_dma_irq_handler NULL
#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
static int omap2_dma_handle_ch(int ch)
{
@@ -2318,6 +2343,9 @@ static int __init omap_init_dma(void)
} else if (cpu_is_omap34xx()) {
omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+ } else if (cpu_is_omap44xx()) {
+ omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
+ dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else {
pr_err("DMA init failed for unsupported omap\n");
return -ENODEV;
@@ -2416,12 +2444,18 @@ static int __init omap_init_dma(void)
}
}
- if (cpu_is_omap2430() || cpu_is_omap34xx())
+ if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
DMA_DEFAULT_FIFO_DEPTH, 0);
- if (cpu_class_is_omap2())
- setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
+ if (cpu_class_is_omap2()) {
+ int irq;
+ if (cpu_is_omap44xx())
+ irq = INT_44XX_SDMA_IRQ0;
+ else
+ irq = INT_24XX_SDMA_IRQ0;
+ setup_irq(irq, &omap24xx_dma_irq);
+ }
/* FIXME: Update LCD DMA to work on 24xx */
if (cpu_class_is_omap1()) {
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 55bb996..7f50b61 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -7,6 +7,9 @@
* OMAP2 support by Juha Yrjola
* API improvements and OMAP2 clock framework support by Timo Teras
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -150,7 +153,8 @@
struct omap_dm_timer {
unsigned long phys_base;
int irq;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
struct clk *iclk, *fclk;
#endif
void __iomem *io_base;
@@ -169,6 +173,9 @@ struct omap_dm_timer {
#define omap3_dm_timers NULL
#define omap3_dm_source_names NULL
#define omap3_dm_source_clocks NULL
+#define omap4_dm_timers NULL
+#define omap4_dm_source_names NULL
+#define omap4_dm_source_clocks NULL
static struct omap_dm_timer omap1_dm_timers[] = {
{ .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
@@ -191,6 +198,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
#define omap3_dm_timers NULL
#define omap3_dm_source_names NULL
#define omap3_dm_source_clocks NULL
+#define omap4_dm_timers NULL
+#define omap4_dm_source_names NULL
+#define omap4_dm_source_clocks NULL
static struct omap_dm_timer omap2_dm_timers[] = {
{ .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
@@ -214,7 +224,7 @@ static const char *omap2_dm_source_names[] __initdata = {
NULL
};
-static struct clk **omap2_dm_source_clocks[3];
+static struct clk *omap2_dm_source_clocks[3];
static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
#elif defined(CONFIG_ARCH_OMAP3)
@@ -225,6 +235,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
#define omap2_dm_timers NULL
#define omap2_dm_source_names NULL
#define omap2_dm_source_clocks NULL
+#define omap4_dm_timers NULL
+#define omap4_dm_source_names NULL
+#define omap4_dm_source_clocks NULL
static struct omap_dm_timer omap3_dm_timers[] = {
{ .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 },
@@ -247,9 +260,43 @@ static const char *omap3_dm_source_names[] __initdata = {
NULL
};
-static struct clk **omap3_dm_source_clocks[2];
+static struct clk *omap3_dm_source_clocks[2];
static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
+#elif defined(CONFIG_ARCH_OMAP4)
+
+#define omap_dm_clk_enable(x) clk_enable(x)
+#define omap_dm_clk_disable(x) clk_disable(x)
+#define omap1_dm_timers NULL
+#define omap2_dm_timers NULL
+#define omap2_dm_source_names NULL
+#define omap2_dm_source_clocks NULL
+#define omap3_dm_timers NULL
+#define omap3_dm_source_names NULL
+#define omap3_dm_source_clocks NULL
+
+static struct omap_dm_timer omap4_dm_timers[] = {
+ { .phys_base = 0x4a318000, .irq = INT_44XX_GPTIMER1 },
+ { .phys_base = 0x48032000, .irq = INT_44XX_GPTIMER2 },
+ { .phys_base = 0x48034000, .irq = INT_44XX_GPTIMER3 },
+ { .phys_base = 0x48036000, .irq = INT_44XX_GPTIMER4 },
+ { .phys_base = 0x40138000, .irq = INT_44XX_GPTIMER5 },
+ { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER6 },
+ { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER7 },
+ { .phys_base = 0x4013e000, .irq = INT_44XX_GPTIMER8 },
+ { .phys_base = 0x4803e000, .irq = INT_44XX_GPTIMER9 },
+ { .phys_base = 0x48086000, .irq = INT_44XX_GPTIMER10 },
+ { .phys_base = 0x48088000, .irq = INT_44XX_GPTIMER11 },
+ { .phys_base = 0x4a320000, .irq = INT_44XX_GPTIMER12 },
+};
+static const char *omap4_dm_source_names[] __initdata = {
+ "sys_ck",
+ "omap_32k_fck",
+ NULL
+};
+static struct clk *omap4_dm_source_clocks[2];
+static const int dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
+
#else
#error OMAP architecture not supported!
@@ -257,7 +304,7 @@ static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
#endif
static struct omap_dm_timer *dm_timers;
-static char **dm_source_names;
+static const char **dm_source_names;
static struct clk **dm_source_clocks;
static spinlock_t dm_timer_lock;
@@ -459,7 +506,8 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
}
EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
-#elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
{
@@ -705,12 +753,16 @@ int __init omap_dm_timer_init(void)
dm_timers = omap1_dm_timers;
else if (cpu_is_omap24xx()) {
dm_timers = omap2_dm_timers;
- dm_source_names = (char **)omap2_dm_source_names;
- dm_source_clocks = (struct clk **)omap2_dm_source_clocks;
+ dm_source_names = omap2_dm_source_names;
+ dm_source_clocks = omap2_dm_source_clocks;
} else if (cpu_is_omap34xx()) {
dm_timers = omap3_dm_timers;
- dm_source_names = (char **)omap3_dm_source_names;
- dm_source_clocks = (struct clk **)omap3_dm_source_clocks;
+ dm_source_names = omap3_dm_source_names;
+ dm_source_clocks = omap3_dm_source_clocks;
+ } else if (cpu_is_omap44xx()) {
+ dm_timers = omap4_dm_timers;
+ dm_source_names = omap4_dm_source_names;
+ dm_source_clocks = omap4_dm_source_clocks;
}
if (cpu_class_is_omap2())
@@ -723,7 +775,8 @@ int __init omap_dm_timer_init(void)
for (i = 0; i < dm_timer_count; i++) {
timer = &dm_timers[i];
timer->io_base = IO_ADDRESS(timer->phys_base);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
if (cpu_class_is_omap2()) {
char clk_name[16];
sprintf(clk_name, "gpt%d_ick", i + 1);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index ee0b21f..7fd89ba 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -6,6 +6,9 @@
* Copyright (C) 2003-2005 Nokia Corporation
* Written by Juha Yrjölä <juha.yrjola@nokia.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -146,6 +149,16 @@
#define OMAP34XX_GPIO5_BASE IO_ADDRESS(0x49056000)
#define OMAP34XX_GPIO6_BASE IO_ADDRESS(0x49058000)
+/*
+ * OMAP44XX specific GPIO registers
+ */
+#define OMAP44XX_GPIO1_BASE IO_ADDRESS(0x4a310000)
+#define OMAP44XX_GPIO2_BASE IO_ADDRESS(0x48055000)
+#define OMAP44XX_GPIO3_BASE IO_ADDRESS(0x48057000)
+#define OMAP44XX_GPIO4_BASE IO_ADDRESS(0x48059000)
+#define OMAP44XX_GPIO5_BASE IO_ADDRESS(0x4805B000)
+#define OMAP44XX_GPIO6_BASE IO_ADDRESS(0x4805D000)
+
#define OMAP_MPUIO_VBASE IO_ADDRESS(OMAP_MPUIO_BASE)
struct gpio_bank {
@@ -153,11 +166,13 @@ struct gpio_bank {
u16 irq;
u16 virtual_irq_start;
int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
u32 suspend_wakeup;
u32 saved_wakeup;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
u32 non_wakeup_gpios;
u32 enabled_non_wakeup_gpios;
@@ -251,6 +266,24 @@ static struct gpio_bank gpio_bank_34xx[6] = {
#endif
+#ifdef CONFIG_ARCH_OMAP4
+static struct gpio_bank gpio_bank_44xx[6] = {
+ { OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
+ METHOD_GPIO_24XX },
+};
+
+#endif
+
static struct gpio_bank *gpio_bank;
static int gpio_bank_count;
@@ -273,7 +306,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
}
if (cpu_is_omap24xx())
return &gpio_bank[gpio >> 5];
- if (cpu_is_omap34xx())
+ if (cpu_is_omap34xx() || cpu_is_omap44xx())
return &gpio_bank[gpio >> 5];
BUG();
return NULL;
@@ -285,7 +318,7 @@ static inline int get_gpio_index(int gpio)
return gpio & 0x1f;
if (cpu_is_omap24xx())
return gpio & 0x1f;
- if (cpu_is_omap34xx())
+ if (cpu_is_omap34xx() || cpu_is_omap44xx())
return gpio & 0x1f;
return gpio & 0x0f;
}
@@ -307,7 +340,7 @@ static inline int gpio_valid(int gpio)
return 0;
if (cpu_is_omap24xx() && gpio < 128)
return 0;
- if (cpu_is_omap34xx() && gpio < 192)
+ if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
return 0;
return -1;
}
@@ -353,7 +386,8 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
reg += OMAP850_GPIO_DIR_CONTROL;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
@@ -425,7 +459,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
l &= ~(1 << gpio);
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -476,7 +511,8 @@ static int __omap_get_gpio_datain(int gpio)
reg += OMAP850_GPIO_DATA_INPUT;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAIN;
break;
@@ -520,7 +556,7 @@ void omap_set_gpio_debounce(int gpio, int enable)
else
goto done;
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
if (enable)
clk_enable(bank->dbck);
else
@@ -550,7 +586,8 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
}
EXPORT_SYMBOL(omap_set_gpio_debounce_time);
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
int trigger)
{
@@ -660,7 +697,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
goto bad;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
set_24xx_gpio_triggering(bank, gpio, trigger);
break;
@@ -745,7 +783,8 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
reg += OMAP850_GPIO_INT_STATUS;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQSTATUS1;
break;
@@ -814,7 +853,8 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
inv = 1;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQENABLE1;
mask = 0xffffffff;
@@ -887,7 +927,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
l |= gpio_mask;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -932,7 +973,8 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (bank->non_wakeup_gpios & (1 << gpio)) {
printk(KERN_ERR "Unable to modify wakeup on "
@@ -1017,7 +1059,8 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
__raw_writel(1 << offset, reg);
}
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX) {
/* Disable wake-up during idle for dynamic tick */
void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1069,7 +1112,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
if (bank->method == METHOD_GPIO_850)
isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX)
isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
#endif
@@ -1346,7 +1390,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
/*---------------------------------------------------------------------*/
static int initialized;
-#if !defined(CONFIG_ARCH_OMAP3)
+#if !(defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4))
static struct clk * gpio_ick;
#endif
@@ -1359,7 +1403,7 @@ static struct clk * gpio5_ick;
static struct clk * gpio5_fck;
#endif
-#if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
#endif
@@ -1419,8 +1463,8 @@ static int __init _omap_gpio_init(void)
}
#endif
-#if defined(CONFIG_ARCH_OMAP3)
- if (cpu_is_omap34xx()) {
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
for (i = 0; i < OMAP34XX_NR_GPIOS; i++) {
sprintf(clk_name, "gpio%d_ick", i + 1);
gpio_iclks[i] = clk_get(NULL, clk_name);
@@ -1497,6 +1541,17 @@ static int __init _omap_gpio_init(void)
(rev >> 4) & 0x0f, rev & 0x0f);
}
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ if (cpu_is_omap44xx()) {
+ int rev;
+
+ gpio_bank_count = OMAP34XX_NR_GPIOS;
+ gpio_bank = gpio_bank_44xx;
+ rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+ printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
+ (rev >> 4) & 0x0f, rev & 0x0f);
+ }
+#endif
for (i = 0; i < gpio_bank_count; i++) {
int j, gpio_count = 16;
@@ -1520,7 +1575,8 @@ static int __init _omap_gpio_init(void)
gpio_count = 32; /* 730 has 32-bit GPIOs */
}
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX) {
static const u32 non_wakeup_gpios[] = {
0xe203ffc0, 0x08700040
@@ -1577,7 +1633,7 @@ static int __init _omap_gpio_init(void)
set_irq_chained_handler(bank->irq, gpio_irq_handler);
set_irq_data(bank->irq, bank);
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
sprintf(clk_name, "gpio%d_dbck", i + 1);
bank->dbck = clk_get(NULL, clk_name);
if (IS_ERR(bank->dbck))
@@ -1599,7 +1655,8 @@ static int __init _omap_gpio_init(void)
return 0;
}
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
{
int i;
@@ -1622,7 +1679,8 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1663,7 +1721,8 @@ static int omap_gpio_resume(struct sys_device *dev)
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
@@ -1695,7 +1754,8 @@ static struct sys_device omap_gpio_device = {
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
static int workaround_enabled;
@@ -1711,7 +1771,8 @@ void omap2_gpio_prepare_for_retention(void)
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
@@ -1720,7 +1781,8 @@ void omap2_gpio_prepare_for_retention(void)
bank->saved_risingdetect = l2;
l1 &= ~bank->enabled_non_wakeup_gpios;
l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
#endif
@@ -1745,7 +1807,8 @@ void omap2_gpio_resume_after_retention(void)
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
__raw_writel(bank->saved_fallingdetect,
bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(bank->saved_risingdetect,
@@ -1755,14 +1818,16 @@ void omap2_gpio_resume_after_retention(void)
* state. If so, generate an IRQ by software. This is
* horribly racy, but it's the best we can do to work around
* this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
#endif
l ^= bank->saved_datain;
l &= bank->non_wakeup_gpios;
if (l) {
u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
@@ -1798,7 +1863,8 @@ static int __init omap_gpio_sysinit(void)
mpuio_init();
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
if (ret == 0) {
ret = sysdev_class_register(&omap_gpio_sysclass);
@@ -1887,7 +1953,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
irqstat = irq_desc[irq].status;
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
- defined(CONFIG_ARCH_OMAP34XX)
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
if (is_in && ((bank->suspend_wakeup & mask)
|| irqstat & IRQ_TYPE_SENSE_MASK)) {
char *trigger = NULL;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a303071..8b84839 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2007 Nokia Corporation.
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 073a2c5..f9f65e1 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -22,7 +22,8 @@ struct clkops {
void (*disable)(struct clk *);
};
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
struct clksel_rate {
u32 val;
@@ -51,7 +52,7 @@ struct dpll_data {
u8 max_divider;
u32 max_tolerance;
u16 max_multiplier;
-# if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
u8 modes;
void __iomem *autoidle_reg;
void __iomem *idlest_reg;
@@ -83,7 +84,8 @@ struct clk {
void (*init)(struct clk *);
__u8 enable_bit;
__s8 usecount;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
u8 fixed_div;
void __iomem *clksel_reg;
u32 clksel_mask;
@@ -119,7 +121,7 @@ struct clk_functions {
extern unsigned int mpurate;
extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_init_one(struct clk *clk);
+extern void clk_preinit(struct clk *clk);
extern int clk_register(struct clk *clk);
extern void clk_reparent(struct clk *child, struct clk *parent);
extern void clk_unregister(struct clk *clk);
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index 0ecf36d..fdeab42 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -33,8 +33,6 @@ struct sys_timer;
extern void omap_map_common_io(void);
extern struct sys_timer omap_timer;
-extern void omap_serial_init(void);
-extern void omap_serial_enable_clocks(int enable);
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
@@ -62,6 +60,7 @@ struct omap_globals {
void omap2_set_globals_242x(void);
void omap2_set_globals_243x(void);
void omap2_set_globals_343x(void);
+void omap2_set_globals_443x(void);
/* These get called from omap2_set_globals_xxxx(), do not call these */
void omap2_set_globals_tap(struct omap_globals *);
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index 269147f..8140dbc 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,9 +1,9 @@
/*
* arch/arm/plat-omap/include/mach/control.h
*
- * OMAP2/3 System Control Module definitions
+ * OMAP2/3/4 System Control Module definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
* Copyright (C) 2007-2008 Nokia Corporation
*
* Written by Paul Walmsley
@@ -144,6 +144,10 @@
#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02b0)
#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4)
+/* 34xx D2D idle-related pins, handled by PM core */
+#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
+#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
+
/*
* REVISIT: This list of registers is not comprehensive - there are more
* that should be added.
@@ -189,8 +193,18 @@
#define OMAP2_PBIASLITEPWRDNZ0 (1 << 1)
#define OMAP2_PBIASLITEVMODE0 (1 << 0)
+/* CONTROL_IVA2_BOOTMOD bits */
+#define OMAP3_IVA2_BOOTMOD_SHIFT 0
+#define OMAP3_IVA2_BOOTMOD_MASK (0xf << 0)
+#define OMAP3_IVA2_BOOTMOD_IDLE (0x1 << 0)
+
+/* CONTROL_PADCONF_X bits */
+#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15)
+#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14)
+
#ifndef __ASSEMBLY__
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
extern void __iomem *omap_ctrl_base_get(void);
extern u8 omap_ctrl_readb(u16 offset);
extern u16 omap_ctrl_readw(u16 offset);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 98b1442..fc60c4e 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -5,8 +5,12 @@
*
* Copyright (C) 2004, 2008 Nokia Corporation
*
+ * Copyright (C) 2009 Texas Instruments.
+ *
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
+ * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -155,6 +159,8 @@ IS_OMAP_SUBCLASS(343x, 0x343)
#define cpu_is_omap243x() 0
#define cpu_is_omap34xx() 0
#define cpu_is_omap343x() 0
+#define cpu_is_omap44xx() 0
+#define cpu_is_omap443x() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
@@ -348,12 +354,21 @@ IS_OMAP_TYPE(3430, 0x3430)
# define cpu_is_omap3430() is_omap3430()
#endif
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# define cpu_is_omap44xx() 1
+# define cpu_is_omap443x() 1
+# endif
+
/* Macros to detect if we have OMAP1 or OMAP2 */
#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \
cpu_is_omap16xx())
-#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx())
+#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
+ cpu_is_omap44xx())
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
@@ -370,6 +385,8 @@ IS_OMAP_TYPE(3430, 0x3430)
#define OMAP3430_REV_ES3_0 0x34303034
#define OMAP3430_REV_ES3_1 0x34304034
+#define OMAP443X_CLASS 0x44300034
+
/*
* omap_chip bits
*
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
index 1b11f5c..ac24050 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -36,7 +36,7 @@
add \rx, \rx, #0x00004000 @ UART 3
#endif
-#elif CONFIG_ARCH_OMAP3
+#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
moveq \rx, #0x48000000 @ physical base address
movne \rx, #0xd8000000 @ virtual base
orr \rx, \rx, #0x0006a000
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 54fe966..8c1eae8 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -48,6 +48,7 @@
/* Hardware registers for omap2 and omap3 */
#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000)
#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000)
+#define OMAP44XX_DMA4_BASE (L4_44XX_BASE + 0x56000)
#define OMAP_DMA4_REVISION 0x00
#define OMAP_DMA4_GCR 0x78
@@ -144,6 +145,7 @@
#define OMAP_DMA4_CSSA_U(n) 0
#define OMAP_DMA4_CDSA_L(n) 0
#define OMAP_DMA4_CDSA_U(n) 0
+#define OMAP1_DMA_COLOR(n) 0
/*----------------------------------------------------------------------------*/
@@ -531,7 +533,7 @@ extern int omap_get_dma_index(int lch, int *ei, int *fi);
/* Chaining APIs */
#ifndef CONFIG_ARCH_OMAP1
extern int omap_request_dma_chain(int dev_id, const char *dev_name,
- void (*callback) (int chain_id, u16 ch_status,
+ void (*callback) (int lch, u16 ch_status,
void *data),
int *chain_id, int no_of_chans,
int chain_mode,
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index 2276f89..56426ed 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -3,6 +3,9 @@
*
* Low-level IRQ helper macros for OMAP-based platforms
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
@@ -10,6 +13,7 @@
#include <mach/hardware.h>
#include <mach/io.h>
#include <mach/irqs.h>
+#include <asm/hardware/gic.h>
#if defined(CONFIG_ARCH_OMAP1)
@@ -56,15 +60,21 @@
.endm
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
-#if defined(CONFIG_ARCH_OMAP24XX)
#include <mach/omap24xx.h>
-#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
#include <mach/omap34xx.h>
-#endif
+/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
+#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
+#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
+#elif defined(CONFIG_ARCH_OMAP34XX)
+#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+#include <mach/omap44xx.h>
+#endif
#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */
#define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */
@@ -77,6 +87,7 @@
.macro arch_ret_to_user, tmp1, tmp2
.endm
+#ifndef CONFIG_ARCH_OMAP4
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =OMAP2_VA_IC_BASE
ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
@@ -92,6 +103,68 @@
and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
.endm
+#else
+ /*
+ * The interrupt numbering scheme is defined in the
+ * interrupt controller spec. To wit:
+ *
+ * Interrupts 0-15 are IPI
+ * 16-28 are reserved
+ * 29-31 are local. We allow 30 to be used for the watchdog.
+ * 32-1020 are global
+ * 1021-1022 are reserved
+ * 1023 is "spurious" (no interrupt)
+ *
+ * For now, we ignore all local interrupts so only return an
+ * interrupt if it's between 30 and 1020. The test_for_ipi
+ * routine below will pick up on IPIs.
+ * A simple read from the controller will tell us the number
+ * of the highest priority enabled interrupt.
+ * We then just need to check whether it is in the
+ * valid range for an IRQ (30-1020 inclusive).
+ */
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =OMAP44XX_VA_GIC_CPU_BASE
+ ldr \irqstat, [\base, #GIC_CPU_INTACK]
+
+ ldr \tmp, =1021
+
+ bic \irqnr, \irqstat, #0x1c00
+
+ cmp \irqnr, #29
+ cmpcc \irqnr, \irqnr
+ cmpne \irqnr, \tmp
+ cmpcs \irqnr, \irqnr
+ .endm
+
+ /* We assume that irqstat (the raw value of the IRQ acknowledge
+ * register) is preserved from the macro above.
+ * If there is an IPI, we immediately signal end of interrupt
+ * on the controller, since this requires the original irqstat
+ * value which we won't easily be able to recreate later.
+ */
+
+ .macro test_for_ipi, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ cmp \irqnr, #16
+ it cc
+ strcc \irqstat, [\base, #GIC_CPU_EOI]
+ it cs
+ cmpcs \irqnr, \irqnr
+ .endm
+
+ /* As above, this assumes that irqstat and base are preserved */
+
+ .macro test_for_ltirq, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ mov \tmp, #0
+ cmp \irqnr, #29
+ itt eq
+ moveq \tmp, #1
+ streq \irqstat, [\base, #GIC_CPU_EOI]
+ cmp \tmp, #0
+ .endm
+#endif
.macro irq_prio_table
.endm
diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
new file mode 100644
index 0000000..b64fbee
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
+
+#define GPMC_TIMINGS_SMC91C96 (1 << 4)
+#define GPMC_MUX_ADD_DATA (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
+#define GPMC_READ_MON (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
+#define GPMC_WRITE_MON (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
+
+struct omap_smc91x_platform_data {
+ int cs;
+ int gpio_irq;
+ int gpio_pwrdwn;
+ int gpio_reset;
+ int wait_pin; /* Optional GPMC_CONFIG1_WAITPINSELECT */
+ u32 flags;
+ int (*retime)(void);
+};
+
+#if defined(CONFIG_SMC91X) || \
+ defined(CONFIG_SMC91X_MODULE)
+
+extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
+
+#else
+
+#define board_smc91x_data NULL
+
+static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
+{
+}
+
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 3dc423e..26c1fbf 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -285,5 +285,6 @@
#include "omap16xx.h"
#include "omap24xx.h"
#include "omap34xx.h"
+#include "omap44xx.h"
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h
index 577f492..886248d 100644
--- a/arch/arm/plat-omap/include/mach/hwa742.h
+++ b/arch/arm/plat-omap/include/mach/hwa742.h
@@ -2,10 +2,6 @@
#define _HWA742_H
struct hwa742_platform_data {
- void (*power_up)(struct device *dev);
- void (*power_down)(struct device *dev);
- unsigned long (*get_clock_rate)(struct device *dev);
-
unsigned te_connected:1;
};
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 0610d7e..3b28147 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -6,6 +6,9 @@
* Copied from arch/arm/mach-sa1100/include/mach/io.h
* Copyright (C) 1997-1999 Russell King
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -157,6 +160,40 @@
#define DSP_MMU_34XX_VIRT 0xe2000000
#define DSP_MMU_34XX_SIZE SZ_4K
+
+#elif defined(CONFIG_ARCH_OMAP4)
+/* We map both L3 and L4 on OMAP4 */
+#define L3_44XX_PHYS L3_44XX_BASE
+#define L3_44XX_VIRT 0xd4000000
+#define L3_44XX_SIZE SZ_1M
+
+#define L4_44XX_PHYS L4_44XX_BASE
+#define L4_44XX_VIRT 0xda000000
+#define L4_44XX_SIZE SZ_4M
+
+
+#define L4_WK_44XX_PHYS L4_WK_44XX_BASE
+#define L4_WK_44XX_VIRT 0xda300000
+#define L4_WK_44XX_SIZE SZ_1M
+
+#define L4_PER_44XX_PHYS L4_PER_44XX_BASE
+#define L4_PER_44XX_VIRT 0xd8000000
+#define L4_PER_44XX_SIZE SZ_4M
+
+#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE
+#define L4_EMU_44XX_VIRT 0xe4000000
+#define L4_EMU_44XX_SIZE SZ_64M
+
+#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE
+#define OMAP44XX_GPMC_VIRT 0xe0000000
+#define OMAP44XX_GPMC_SIZE SZ_1M
+
+
+#define IO_OFFSET 0x90000000
+#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
+
#endif
#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa))
diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/mach/iommu.h
new file mode 100644
index 0000000..769b00b
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iommu.h
@@ -0,0 +1,168 @@
+/*
+ * omap iommu: main structures
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU_H
+#define __MACH_IOMMU_H
+
+struct iotlb_entry {
+ u32 da;
+ u32 pa;
+ u32 pgsz, prsvd, valid;
+ union {
+ u16 ap;
+ struct {
+ u32 endian, elsz, mixed;
+ };
+ };
+};
+
+struct iommu {
+ const char *name;
+ struct module *owner;
+ struct clk *clk;
+ void __iomem *regbase;
+ struct device *dev;
+
+ unsigned int refcount;
+ struct mutex iommu_lock; /* global for this whole object */
+
+ /*
+ * We don't change iopgd for a situation like pgd for a task,
+ * but share it globally for each iommu.
+ */
+ u32 *iopgd;
+ spinlock_t page_table_lock; /* protect iopgd */
+
+ int nr_tlb_entries;
+
+ struct list_head mmap;
+ struct mutex mmap_lock; /* protect mmap */
+
+ int (*isr)(struct iommu *obj);
+
+ void *ctx; /* iommu context: registres saved area */
+};
+
+struct cr_regs {
+ union {
+ struct {
+ u16 cam_l;
+ u16 cam_h;
+ };
+ u32 cam;
+ };
+ union {
+ struct {
+ u16 ram_l;
+ u16 ram_h;
+ };
+ u32 ram;
+ };
+};
+
+struct iotlb_lock {
+ short base;
+ short vict;
+};
+
+/* architecture specific functions */
+struct iommu_functions {
+ unsigned long version;
+
+ int (*enable)(struct iommu *obj);
+ void (*disable)(struct iommu *obj);
+ u32 (*fault_isr)(struct iommu *obj, u32 *ra);
+
+ void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr);
+ void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr);
+
+ struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e);
+ int (*cr_valid)(struct cr_regs *cr);
+ u32 (*cr_to_virt)(struct cr_regs *cr);
+ void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e);
+ ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf);
+
+ u32 (*get_pte_attr)(struct iotlb_entry *e);
+
+ void (*save_ctx)(struct iommu *obj);
+ void (*restore_ctx)(struct iommu *obj);
+ ssize_t (*dump_ctx)(struct iommu *obj, char *buf);
+};
+
+struct iommu_platform_data {
+ const char *name;
+ const char *clk_name;
+ const int nr_tlb_entries;
+};
+
+#if defined(CONFIG_ARCH_OMAP1)
+#error "iommu for this processor not implemented yet"
+#else
+#include <mach/iommu2.h>
+#endif
+
+/*
+ * utilities for super page(16MB, 1MB, 64KB and 4KB)
+ */
+
+#define iopgsz_max(bytes) \
+ (((bytes) >= SZ_16M) ? SZ_16M : \
+ ((bytes) >= SZ_1M) ? SZ_1M : \
+ ((bytes) >= SZ_64K) ? SZ_64K : \
+ ((bytes) >= SZ_4K) ? SZ_4K : 0)
+
+#define bytes_to_iopgsz(bytes) \
+ (((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M : \
+ ((bytes) == SZ_1M) ? MMU_CAM_PGSZ_1M : \
+ ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K : \
+ ((bytes) == SZ_4K) ? MMU_CAM_PGSZ_4K : -1)
+
+#define iopgsz_to_bytes(iopgsz) \
+ (((iopgsz) == MMU_CAM_PGSZ_16M) ? SZ_16M : \
+ ((iopgsz) == MMU_CAM_PGSZ_1M) ? SZ_1M : \
+ ((iopgsz) == MMU_CAM_PGSZ_64K) ? SZ_64K : \
+ ((iopgsz) == MMU_CAM_PGSZ_4K) ? SZ_4K : 0)
+
+#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0)
+
+/*
+ * global functions
+ */
+extern u32 iommu_arch_version(void);
+
+extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
+extern u32 iotlb_cr_to_virt(struct cr_regs *cr);
+
+extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e);
+extern void flush_iotlb_page(struct iommu *obj, u32 da);
+extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
+extern void flush_iotlb_all(struct iommu *obj);
+
+extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
+extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
+
+extern struct iommu *iommu_get(const char *name);
+extern void iommu_put(struct iommu *obj);
+
+extern void iommu_save_ctx(struct iommu *obj);
+extern void iommu_restore_ctx(struct iommu *obj);
+
+extern int install_iommu_arch(const struct iommu_functions *ops);
+extern void uninstall_iommu_arch(const struct iommu_functions *ops);
+
+extern int foreach_iommu_device(void *data,
+ int (*fn)(struct device *, void *));
+
+extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf);
+extern size_t dump_tlb_entries(struct iommu *obj, char *buf);
+
+#endif /* __MACH_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/mach/iommu2.h
new file mode 100644
index 0000000..10ad05f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iommu2.h
@@ -0,0 +1,96 @@
+/*
+ * omap iommu: omap2 architecture specific definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU2_H
+#define __MACH_IOMMU2_H
+
+#include <linux/io.h>
+
+/*
+ * MMU Register offsets
+ */
+#define MMU_REVISION 0x00
+#define MMU_SYSCONFIG 0x10
+#define MMU_SYSSTATUS 0x14
+#define MMU_IRQSTATUS 0x18
+#define MMU_IRQENABLE 0x1c
+#define MMU_WALKING_ST 0x40
+#define MMU_CNTL 0x44
+#define MMU_FAULT_AD 0x48
+#define MMU_TTB 0x4c
+#define MMU_LOCK 0x50
+#define MMU_LD_TLB 0x54
+#define MMU_CAM 0x58
+#define MMU_RAM 0x5c
+#define MMU_GFLUSH 0x60
+#define MMU_FLUSH_ENTRY 0x64
+#define MMU_READ_CAM 0x68
+#define MMU_READ_RAM 0x6c
+#define MMU_EMU_FAULT_AD 0x70
+
+#define MMU_REG_SIZE 256
+
+/*
+ * MMU Register bit definitions
+ */
+#define MMU_LOCK_BASE_SHIFT 10
+#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT)
+#define MMU_LOCK_BASE(x) \
+ ((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT)
+
+#define MMU_LOCK_VICT_SHIFT 4
+#define MMU_LOCK_VICT_MASK (0x1f << MMU_LOCK_VICT_SHIFT)
+#define MMU_LOCK_VICT(x) \
+ ((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT)
+
+#define MMU_CAM_VATAG_SHIFT 12
+#define MMU_CAM_VATAG_MASK \
+ ((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
+#define MMU_CAM_P (1 << 3)
+#define MMU_CAM_V (1 << 2)
+#define MMU_CAM_PGSZ_MASK 3
+#define MMU_CAM_PGSZ_1M (0 << 0)
+#define MMU_CAM_PGSZ_64K (1 << 0)
+#define MMU_CAM_PGSZ_4K (2 << 0)
+#define MMU_CAM_PGSZ_16M (3 << 0)
+
+#define MMU_RAM_PADDR_SHIFT 12
+#define MMU_RAM_PADDR_MASK \
+ ((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
+#define MMU_RAM_ENDIAN_SHIFT 9
+#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ELSZ_SHIFT 7
+#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_MIXED_SHIFT 6
+#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT)
+#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK
+
+/*
+ * register accessors
+ */
+static inline u32 iommu_read_reg(struct iommu *obj, size_t offs)
+{
+ return __raw_readl(obj->regbase + offs);
+}
+
+static inline void iommu_write_reg(struct iommu *obj, u32 val, size_t offs)
+{
+ __raw_writel(val, obj->regbase + offs);
+}
+
+#endif /* __MACH_IOMMU2_H */
diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/mach/iovmm.h
new file mode 100644
index 0000000..bdc7ce5
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/iovmm.h
@@ -0,0 +1,94 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOMMU_MMAP_H
+#define __IOMMU_MMAP_H
+
+struct iovm_struct {
+ struct iommu *iommu; /* iommu object which this belongs to */
+ u32 da_start; /* area definition */
+ u32 da_end;
+ u32 flags; /* IOVMF_: see below */
+ struct list_head list; /* linked in ascending order */
+ const struct sg_table *sgt; /* keep 'page' <-> 'da' mapping */
+ void *va; /* mpu side mapped address */
+};
+
+/*
+ * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma)
+ *
+ * lower 16 bit is used for h/w and upper 16 bit is for s/w.
+ */
+#define IOVMF_SW_SHIFT 16
+#define IOVMF_HW_SIZE (1 << IOVMF_SW_SHIFT)
+#define IOVMF_HW_MASK (IOVMF_HW_SIZE - 1)
+#define IOVMF_SW_MASK (~IOVMF_HW_MASK)UL
+
+/*
+ * iovma: h/w flags derived from cam and ram attribute
+ */
+#define IOVMF_CAM_MASK (~((1 << 10) - 1))
+#define IOVMF_RAM_MASK (~IOVMF_CAM_MASK)
+
+#define IOVMF_PGSZ_MASK (3 << 0)
+#define IOVMF_PGSZ_1M MMU_CAM_PGSZ_1M
+#define IOVMF_PGSZ_64K MMU_CAM_PGSZ_64K
+#define IOVMF_PGSZ_4K MMU_CAM_PGSZ_4K
+#define IOVMF_PGSZ_16M MMU_CAM_PGSZ_16M
+
+#define IOVMF_ENDIAN_MASK (1 << 9)
+#define IOVMF_ENDIAN_BIG MMU_RAM_ENDIAN_BIG
+#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE
+
+#define IOVMF_ELSZ_MASK (3 << 7)
+#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8
+#define IOVMF_ELSZ_16 MMU_RAM_ELSZ_16
+#define IOVMF_ELSZ_32 MMU_RAM_ELSZ_32
+#define IOVMF_ELSZ_NONE MMU_RAM_ELSZ_NONE
+
+#define IOVMF_MIXED_MASK (1 << 6)
+#define IOVMF_MIXED MMU_RAM_MIXED
+
+/*
+ * iovma: s/w flags, used for mapping and umapping internally.
+ */
+#define IOVMF_MMIO (1 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC (2 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC_MASK (3 << IOVMF_SW_SHIFT)
+
+/* "superpages" is supported just with physically linear pages */
+#define IOVMF_DISCONT (1 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR (2 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT))
+
+#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT))
+#define IOVMF_DA_ANON (2 << (4 + IOVMF_SW_SHIFT))
+#define IOVMF_DA_MASK (3 << (4 + IOVMF_SW_SHIFT))
+
+
+extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da);
+extern u32 iommu_vmap(struct iommu *obj, u32 da,
+ const struct sg_table *sgt, u32 flags);
+extern struct sg_table *iommu_vunmap(struct iommu *obj, u32 da);
+extern u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes,
+ u32 flags);
+extern void iommu_vfree(struct iommu *obj, const u32 da);
+extern u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
+ u32 flags);
+extern void iommu_kunmap(struct iommu *obj, u32 da);
+extern u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes,
+ u32 flags);
+extern void iommu_kfree(struct iommu *obj, u32 da);
+
+extern void *da_to_va(struct iommu *obj, u32 da);
+
+#endif /* __IOMMU_MMAP_H */
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 7f57ee6..fb7cb77 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -4,6 +4,9 @@
* Copyright (C) Greg Lonnon 2001
* Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -422,6 +425,94 @@
#define INT_34XX_BENCH_MPU_EMUL 3
+
+#define IRQ_GIC_START 32
+#define INT_44XX_LOCALTIMER_IRQ 29
+#define INT_44XX_LOCALWDT_IRQ 30
+
+#define INT_44XX_BENCH_MPU_EMUL (3 + IRQ_GIC_START)
+#define INT_44XX_SSM_ABORT_IRQ (6 + IRQ_GIC_START)
+#define INT_44XX_SYS_NIRQ (7 + IRQ_GIC_START)
+#define INT_44XX_D2D_FW_IRQ (8 + IRQ_GIC_START)
+#define INT_44XX_PRCM_MPU_IRQ (11 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ0 (12 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ1 (13 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ2 (14 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ3 (15 + IRQ_GIC_START)
+#define INT_44XX_ISS_IRQ (24 + IRQ_GIC_START)
+#define INT_44XX_DSS_IRQ (25 + IRQ_GIC_START)
+#define INT_44XX_MAIL_U0_MPU (26 + IRQ_GIC_START)
+#define INT_44XX_DSP_MMU (28 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER1 (37 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER2 (38 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER3 (39 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER4 (40 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER5 (41 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER6 (42 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER7 (43 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER8 (44 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER9 (45 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER10 (46 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER11 (47 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER12 (95 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD5 (51 + IRQ_GIC_START)
+#define INT_44XX_I2C1_IRQ (56 + IRQ_GIC_START)
+#define INT_44XX_I2C2_IRQ (57 + IRQ_GIC_START)
+#define INT_44XX_HDQ_IRQ (58 + IRQ_GIC_START)
+#define INT_44XX_SPI1_IRQ (65 + IRQ_GIC_START)
+#define INT_44XX_SPI2_IRQ (66 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_IRQ0 (67 + IRQ_GIC_START)
+#define INT_44XX_HSI_2_IRQ1 (68 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_DMAIRQ (71 + IRQ_GIC_START)
+#define INT_44XX_UART1_IRQ (72 + IRQ_GIC_START)
+#define INT_44XX_UART2_IRQ (73 + IRQ_GIC_START)
+#define INT_44XX_UART3_IRQ (74 + IRQ_GIC_START)
+#define INT_44XX_UART4_IRQ (70 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_NISO (76 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_ISO (77 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HGEN (78 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HSOF (79 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_OTG (80 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_TX (81 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_RX (82 + IRQ_GIC_START)
+#define INT_44XX_MMC_IRQ (83 + IRQ_GIC_START)
+#define INT_44XX_MMC2_IRQ (86 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_TX (89 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_RX (90 + IRQ_GIC_START)
+#define INT_44XX_SPI3_IRQ (91 + IRQ_GIC_START)
+#define INT_44XX_SPI5_IRQ (69 + IRQ_GIC_START)
+
+#define INT_44XX_MCBSP5_IRQ (16 + IRQ_GIC_START)
+#define INT_44xX_MCBSP1_IRQ (17 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ (22 + IRQ_GIC_START)
+#define INT_44XX_MCBSP3_IRQ (23 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ (27 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_MC (92 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_DMA (93 + IRQ_GIC_START)
+
+#define INT_44XX_GPIO_BANK1 (29 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK2 (30 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK3 (31 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK4 (32 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK5 (33 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK6 (34 + IRQ_GIC_START)
+#define INT_44XX_USIM_IRQ (35 + IRQ_GIC_START)
+#define INT_44XX_WDT3_IRQ (36 + IRQ_GIC_START)
+#define INT_44XX_SPI4_IRQ (48 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD52_IRQ (49 + IRQ_GIC_START)
+#define INT_44XX_FPKA_READY_IRQ (50 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD51_IRQ (51 + IRQ_GIC_START)
+#define INT_44XX_RNG_IRQ (52 + IRQ_GIC_START)
+#define INT_44XX_I2C3_IRQ (61 + IRQ_GIC_START)
+#define INT_44XX_FPKA_ERROR_IRQ (64 + IRQ_GIC_START)
+#define INT_44XX_PBIAS_IRQ (75 + IRQ_GIC_START)
+#define INT_44XX_OHCI_IRQ (76 + IRQ_GIC_START)
+#define INT_44XX_EHCI_IRQ (77 + IRQ_GIC_START)
+#define INT_44XX_TLL_IRQ (78 + IRQ_GIC_START)
+#define INT_44XX_PARTHASH_IRQ (79 + IRQ_GIC_START)
+#define INT_44XX_MMC3_IRQ (94 + IRQ_GIC_START)
+
+
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192
@@ -467,6 +558,7 @@
#ifndef __ASSEMBLY__
extern void omap_init_irq(void);
+extern int omap_irq_pending(void);
#endif
#include <mach/hardware.h>
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index 232923a..45ea3ae 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -33,7 +33,11 @@ struct omap_kp_platform_data {
#define GROUP_3 (3 << 16)
#define GROUP_MASK GROUP_3
+#define KEY_PERSISTENT 0x00800000
+#define KEYNUM_MASK 0x00EFFFFF
#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
+ KEY_PERSISTENT)
#endif
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index 99ed564..9ad41dc 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -38,7 +38,8 @@
*/
#if defined(CONFIG_ARCH_OMAP1)
#define PHYS_OFFSET UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
#define PHYS_OFFSET UL(0x80000000)
#endif
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index 24335d4..696edfc 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -85,23 +85,5 @@
#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000)
#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000)
-#if defined(CONFIG_ARCH_OMAP2420)
-
-#define OMAP2_32KSYNCT_BASE OMAP2420_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE OMAP2420_PRCM_BASE
-#define OMAP2_CM_BASE OMAP2420_CM_BASE
-#define OMAP2_PRM_BASE OMAP2420_PRM_BASE
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#elif defined(CONFIG_ARCH_OMAP2430)
-
-#define OMAP2_32KSYNCT_BASE OMAP2430_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE OMAP2430_PRCM_BASE
-#define OMAP2_CM_BASE OMAP2430_CM_BASE
-#define OMAP2_PRM_BASE OMAP2430_PRM_BASE
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#endif
-
#endif /* __ASM_ARCH_OMAP24XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
index ab64015..f8d186a 100644
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -31,13 +31,9 @@
#define L4_34XX_BASE 0x48000000
#define L4_WK_34XX_BASE 0x48300000
-#define L4_WK_OMAP_BASE L4_WK_34XX_BASE
#define L4_PER_34XX_BASE 0x49000000
-#define L4_PER_OMAP_BASE L4_PER_34XX_BASE
#define L4_EMU_34XX_BASE 0x54000000
-#define L4_EMU_BASE L4_EMU_34XX_BASE
#define L3_34XX_BASE 0x68000000
-#define L3_OMAP_BASE L3_34XX_BASE
#define OMAP3430_32KSYNCT_BASE 0x48320000
#define OMAP3430_CM_BASE 0x48004800
@@ -83,15 +79,6 @@
#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000)
-#if defined(CONFIG_ARCH_OMAP3430)
-
-#define OMAP2_32KSYNCT_BASE OMAP3430_32KSYNCT_BASE
-#define OMAP2_CM_BASE OMAP3430_CM_BASE
-#define OMAP2_PRM_BASE OMAP3430_PRM_BASE
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
-
-#endif
-
#define OMAP34XX_DSP_BASE 0x58000000
#define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0)
#define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000)
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
new file mode 100644
index 0000000..15dec7f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap44xx.h
@@ -0,0 +1,46 @@
+/*:
+ * Address mappings and base address for OMAP4 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_OMAP44XX_H
+#define __ASM_ARCH_OMAP44XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_44XX_BASE 0x4a000000
+#define L4_WK_44XX_BASE 0x4a300000
+#define L4_PER_44XX_BASE 0x48000000
+#define L4_EMU_44XX_BASE 0x54000000
+#define L3_44XX_BASE 0x44000000
+#define OMAP4430_32KSYNCT_BASE 0x4a304000
+#define OMAP4430_CM_BASE 0x4a004000
+#define OMAP4430_PRM_BASE 0x48306000
+#define OMAP44XX_GPMC_BASE 0x50000000
+#define OMAP443X_SCM_BASE 0x4a002000
+#define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE
+#define OMAP44XX_IC_BASE 0x48200000
+#define OMAP44XX_IVA_INTC_BASE 0x40000000
+#define IRQ_SIR_IRQ 0x0040
+#define OMAP44XX_GIC_DIST_BASE 0x48241000
+#define OMAP44XX_GIC_CPU_BASE 0x48240100
+#define OMAP44XX_VA_GIC_CPU_BASE IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define OMAP44XX_SCU_BASE 0x48240000
+#define OMAP44XX_VA_SCU_BASE IO_ADDRESS(OMAP44XX_SCU_BASE)
+#define OMAP44XX_LOCAL_TWD_BASE 0x48240600
+#define OMAP44XX_VA_LOCAL_TWD_BASE IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100
+#define OMAP44XX_WKUPGEN_BASE 0x48281000
+#define OMAP44XX_VA_WKUPGEN_BASE IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+
+#endif /* __ASM_ARCH_OMAP44XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
index 4649d30..72f433d 100644
--- a/arch/arm/plat-omap/include/mach/onenand.h
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -9,8 +9,12 @@
* published by the Free Software Foundation.
*/
+#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#define ONENAND_SYNC_READ (1 << 0)
+#define ONENAND_SYNC_READWRITE (1 << 1)
+
struct omap_onenand_platform_data {
int cs;
int gpio_irq;
@@ -18,8 +22,22 @@ struct omap_onenand_platform_data {
int nr_parts;
int (*onenand_setup)(void __iomem *, int freq);
int dma_channel;
+ u8 flags;
};
-int omap2_onenand_rephase(void);
-
#define ONENAND_MAX_PARTITIONS 8
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+
+#else
+
+#define board_onenand_data NULL
+
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 8a676a0..13abd02 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -1,5 +1,8 @@
/*
- * arch/arm/plat-omap/include/mach/serial.h
+ * arch/arm/plat-omap/include/mach/serial.h
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -15,19 +18,28 @@
#define OMAP_UART1_BASE 0xfffb0000
#define OMAP_UART2_BASE 0xfffb0800
#define OMAP_UART3_BASE 0xfffb9800
+#define OMAP_MAX_NR_PORTS 3
#elif defined(CONFIG_ARCH_OMAP2)
/* OMAP2 serial ports */
#define OMAP_UART1_BASE 0x4806a000
#define OMAP_UART2_BASE 0x4806c000
#define OMAP_UART3_BASE 0x4806e000
+#define OMAP_MAX_NR_PORTS 3
#elif defined(CONFIG_ARCH_OMAP3)
/* OMAP3 serial ports */
#define OMAP_UART1_BASE 0x4806a000
#define OMAP_UART2_BASE 0x4806c000
#define OMAP_UART3_BASE 0x49020000
+#define OMAP_MAX_NR_PORTS 3
+#elif defined(CONFIG_ARCH_OMAP4)
+/* OMAP4 serial ports */
+#define OMAP_UART1_BASE 0x4806a000
+#define OMAP_UART2_BASE 0x4806c000
+#define OMAP_UART3_BASE 0x48020000
+#define OMAP_UART4_BASE 0x4806e000
+#define OMAP_MAX_NR_PORTS 4
#endif
-#define OMAP_MAX_NR_PORTS 3
#define OMAP1510_BASE_BAUD (12000000/16)
#define OMAP16XX_BASE_BAUD (48000000/16)
#define OMAP24XX_BASE_BAUD (48000000/16)
@@ -40,4 +52,13 @@
__ret; \
})
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+extern int omap_uart_can_sleep(void);
+extern void omap_uart_check_wakeup(void);
+extern void omap_uart_prepare_suspend(void);
+extern void omap_uart_prepare_idle(int num);
+extern void omap_uart_resume_idle(int num);
+#endif
+
#endif
diff --git a/arch/arm/plat-omap/include/mach/smp.h b/arch/arm/plat-omap/include/mach/smp.h
new file mode 100644
index 0000000..dcaa8fd
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/smp.h
@@ -0,0 +1,51 @@
+/*
+ * OMAP4 machine specific smp.h
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Interface functions needed for the SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP_ARCH_SMP_H
+#define OMAP_ARCH_SMP_H
+
+#include <asm/hardware/gic.h>
+
+/*
+ * set_event() is used to wake up secondary core from wfe using sev. ROM
+ * code puts the second core into wfe(standby).
+ *
+ */
+#define set_event() __asm__ __volatile__ ("sev" : : : "memory")
+
+/* Needed for secondary core boot */
+extern void omap_secondary_startup(void);
+
+/*
+ * We use Soft IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+ gic_raise_softirq(mask, 1);
+}
+
+/*
+ * Read MPIDR: Multiprocessor affinity register
+ */
+#define hard_smp_processor_id() \
+ ({ \
+ unsigned int cpunum; \
+ __asm__("mrc p15, 0, %0, c0, c0, 5" \
+ : "=r" (cpunum)); \
+ cpunum &= 0x0F; \
+ })
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index ab35d62..dca7c16 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -23,7 +23,8 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2);
+ u32 sdrc_actim_ctrlb, u32 m2,
+ u32 unlock_dll);
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -60,7 +61,8 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz;
extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2);
+ u32 sdrc_actim_ctrlb, u32 m2,
+ u32 unlock_dll);
extern unsigned long omap3_sram_configure_core_dpll_sz;
#endif
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
index 69f0cee..f337e17 100644
--- a/arch/arm/plat-omap/include/mach/usb.h
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -27,13 +27,7 @@
#define UDC_BASE OMAP2_UDC_BASE
#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
-#ifdef CONFIG_USB_MUSB_SOC
extern void usb_musb_init(void);
-#else
-static inline void usb_musb_init(void)
-{
-}
-#endif
#endif
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
index dc104cd..b97dfaf 100644
--- a/arch/arm/plat-omap/include/mach/vmalloc.h
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -17,5 +17,5 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index af326ef..9b42d72 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -1,3 +1,14 @@
+/*
+ * Common io.c file
+ * This file is created by Russell King <rmk+kernel@arm.linux.org.uk>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
#include <linux/module.h>
#include <linux/io.h>
#include <linux/mm.h>
@@ -7,6 +18,7 @@
#include <mach/omap16xx.h>
#include <mach/omap24xx.h>
#include <mach/omap34xx.h>
+#include <mach/omap44xx.h>
#define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz)))
#define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst)))
@@ -92,7 +104,22 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
}
#endif
-
+#ifdef CONFIG_ARCH_OMAP4
+ if (cpu_is_omap44xx()) {
+ if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE))
+ return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
+ if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
+ return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
+ if (BETWEEN(p, L4_WK_44XX_PHYS, L4_WK_44XX_SIZE))
+ return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
+ if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
+ return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
+ if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
+ return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
+ if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
+ return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT);
+ }
+#endif
return __arm_ioremap(p, size, type);
}
EXPORT_SYMBOL(omap_ioremap);
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
new file mode 100644
index 0000000..4cf449f
--- /dev/null
+++ b/arch/arm/plat-omap/iommu.c
@@ -0,0 +1,996 @@
+/*
+ * omap iommu: tlb and pagetable primitives
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ * Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/iommu.h>
+
+#include "iopgtable.h"
+
+/* accommodate the difference between omap1 and omap2/3 */
+static const struct iommu_functions *arch_iommu;
+
+static struct platform_driver omap_iommu_driver;
+static struct kmem_cache *iopte_cachep;
+
+/**
+ * install_iommu_arch - Install archtecure specific iommu functions
+ * @ops: a pointer to architecture specific iommu functions
+ *
+ * There are several kind of iommu algorithm(tlb, pagetable) among
+ * omap series. This interface installs such an iommu algorighm.
+ **/
+int install_iommu_arch(const struct iommu_functions *ops)
+{
+ if (arch_iommu)
+ return -EBUSY;
+
+ arch_iommu = ops;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(install_iommu_arch);
+
+/**
+ * uninstall_iommu_arch - Uninstall archtecure specific iommu functions
+ * @ops: a pointer to architecture specific iommu functions
+ *
+ * This interface uninstalls the iommu algorighm installed previously.
+ **/
+void uninstall_iommu_arch(const struct iommu_functions *ops)
+{
+ if (arch_iommu != ops)
+ pr_err("%s: not your arch\n", __func__);
+
+ arch_iommu = NULL;
+}
+EXPORT_SYMBOL_GPL(uninstall_iommu_arch);
+
+/**
+ * iommu_save_ctx - Save registers for pm off-mode support
+ * @obj: target iommu
+ **/
+void iommu_save_ctx(struct iommu *obj)
+{
+ arch_iommu->save_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(iommu_save_ctx);
+
+/**
+ * iommu_restore_ctx - Restore registers for pm off-mode support
+ * @obj: target iommu
+ **/
+void iommu_restore_ctx(struct iommu *obj)
+{
+ arch_iommu->restore_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(iommu_restore_ctx);
+
+/**
+ * iommu_arch_version - Return running iommu arch version
+ **/
+u32 iommu_arch_version(void)
+{
+ return arch_iommu->version;
+}
+EXPORT_SYMBOL_GPL(iommu_arch_version);
+
+static int iommu_enable(struct iommu *obj)
+{
+ int err;
+
+ if (!obj)
+ return -EINVAL;
+
+ clk_enable(obj->clk);
+
+ err = arch_iommu->enable(obj);
+
+ clk_disable(obj->clk);
+ return err;
+}
+
+static void iommu_disable(struct iommu *obj)
+{
+ if (!obj)
+ return;
+
+ clk_enable(obj->clk);
+
+ arch_iommu->disable(obj);
+
+ clk_disable(obj->clk);
+}
+
+/*
+ * TLB operations
+ */
+void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+ BUG_ON(!cr || !e);
+
+ arch_iommu->cr_to_e(cr, e);
+}
+EXPORT_SYMBOL_GPL(iotlb_cr_to_e);
+
+static inline int iotlb_cr_valid(struct cr_regs *cr)
+{
+ if (!cr)
+ return -EINVAL;
+
+ return arch_iommu->cr_valid(cr);
+}
+
+static inline struct cr_regs *iotlb_alloc_cr(struct iommu *obj,
+ struct iotlb_entry *e)
+{
+ if (!e)
+ return NULL;
+
+ return arch_iommu->alloc_cr(obj, e);
+}
+
+u32 iotlb_cr_to_virt(struct cr_regs *cr)
+{
+ return arch_iommu->cr_to_virt(cr);
+}
+EXPORT_SYMBOL_GPL(iotlb_cr_to_virt);
+
+static u32 get_iopte_attr(struct iotlb_entry *e)
+{
+ return arch_iommu->get_pte_attr(e);
+}
+
+static u32 iommu_report_fault(struct iommu *obj, u32 *da)
+{
+ return arch_iommu->fault_isr(obj, da);
+}
+
+static void iotlb_lock_get(struct iommu *obj, struct iotlb_lock *l)
+{
+ u32 val;
+
+ val = iommu_read_reg(obj, MMU_LOCK);
+
+ l->base = MMU_LOCK_BASE(val);
+ l->vict = MMU_LOCK_VICT(val);
+
+ BUG_ON(l->base != 0); /* Currently no preservation is used */
+}
+
+static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l)
+{
+ u32 val;
+
+ BUG_ON(l->base != 0); /* Currently no preservation is used */
+
+ val = (l->base << MMU_LOCK_BASE_SHIFT);
+ val |= (l->vict << MMU_LOCK_VICT_SHIFT);
+
+ iommu_write_reg(obj, val, MMU_LOCK);
+}
+
+static void iotlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+{
+ arch_iommu->tlb_read_cr(obj, cr);
+}
+
+static void iotlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+{
+ arch_iommu->tlb_load_cr(obj, cr);
+
+ iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+ iommu_write_reg(obj, 1, MMU_LD_TLB);
+}
+
+/**
+ * iotlb_dump_cr - Dump an iommu tlb entry into buf
+ * @obj: target iommu
+ * @cr: contents of cam and ram register
+ * @buf: output buffer
+ **/
+static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr,
+ char *buf)
+{
+ BUG_ON(!cr || !buf);
+
+ return arch_iommu->dump_cr(obj, cr, buf);
+}
+
+/**
+ * load_iotlb_entry - Set an iommu tlb entry
+ * @obj: target iommu
+ * @e: an iommu tlb entry info
+ **/
+int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
+{
+ int i;
+ int err = 0;
+ struct iotlb_lock l;
+ struct cr_regs *cr;
+
+ if (!obj || !obj->nr_tlb_entries || !e)
+ return -EINVAL;
+
+ clk_enable(obj->clk);
+
+ for (i = 0; i < obj->nr_tlb_entries; i++) {
+ struct cr_regs tmp;
+
+ iotlb_lock_get(obj, &l);
+ l.vict = i;
+ iotlb_lock_set(obj, &l);
+ iotlb_read_cr(obj, &tmp);
+ if (!iotlb_cr_valid(&tmp))
+ break;
+ }
+
+ if (i == obj->nr_tlb_entries) {
+ dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
+ err = -EBUSY;
+ goto out;
+ }
+
+ cr = iotlb_alloc_cr(obj, e);
+ if (IS_ERR(cr)) {
+ clk_disable(obj->clk);
+ return PTR_ERR(cr);
+ }
+
+ iotlb_load_cr(obj, cr);
+ kfree(cr);
+
+ /* increment victim for next tlb load */
+ if (++l.vict == obj->nr_tlb_entries)
+ l.vict = 0;
+ iotlb_lock_set(obj, &l);
+out:
+ clk_disable(obj->clk);
+ return err;
+}
+EXPORT_SYMBOL_GPL(load_iotlb_entry);
+
+/**
+ * flush_iotlb_page - Clear an iommu tlb entry
+ * @obj: target iommu
+ * @da: iommu device virtual address
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+void flush_iotlb_page(struct iommu *obj, u32 da)
+{
+ struct iotlb_lock l;
+ int i;
+
+ clk_enable(obj->clk);
+
+ for (i = 0; i < obj->nr_tlb_entries; i++) {
+ struct cr_regs cr;
+ u32 start;
+ size_t bytes;
+
+ iotlb_lock_get(obj, &l);
+ l.vict = i;
+ iotlb_lock_set(obj, &l);
+ iotlb_read_cr(obj, &cr);
+ if (!iotlb_cr_valid(&cr))
+ continue;
+
+ start = iotlb_cr_to_virt(&cr);
+ bytes = iopgsz_to_bytes(cr.cam & 3);
+
+ if ((start <= da) && (da < start + bytes)) {
+ dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
+ __func__, start, da, bytes);
+
+ iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+ }
+ }
+ clk_disable(obj->clk);
+
+ if (i == obj->nr_tlb_entries)
+ dev_dbg(obj->dev, "%s: no page for %08x\n", __func__, da);
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_page);
+
+/**
+ * flush_iotlb_range - Clear an iommu tlb entries
+ * @obj: target iommu
+ * @start: iommu device virtual address(start)
+ * @end: iommu device virtual address(end)
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+void flush_iotlb_range(struct iommu *obj, u32 start, u32 end)
+{
+ u32 da = start;
+
+ while (da < end) {
+ flush_iotlb_page(obj, da);
+ /* FIXME: Optimize for multiple page size */
+ da += IOPTE_SIZE;
+ }
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_range);
+
+/**
+ * flush_iotlb_all - Clear all iommu tlb entries
+ * @obj: target iommu
+ **/
+void flush_iotlb_all(struct iommu *obj)
+{
+ struct iotlb_lock l;
+
+ clk_enable(obj->clk);
+
+ l.base = 0;
+ l.vict = 0;
+ iotlb_lock_set(obj, &l);
+
+ iommu_write_reg(obj, 1, MMU_GFLUSH);
+
+ clk_disable(obj->clk);
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_all);
+
+#if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
+
+ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
+{
+ ssize_t bytes;
+
+ if (!obj || !buf)
+ return -EINVAL;
+
+ clk_enable(obj->clk);
+
+ bytes = arch_iommu->dump_ctx(obj, buf);
+
+ clk_disable(obj->clk);
+
+ return bytes;
+}
+EXPORT_SYMBOL_GPL(iommu_dump_ctx);
+
+static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
+{
+ int i;
+ struct iotlb_lock saved, l;
+ struct cr_regs *p = crs;
+
+ clk_enable(obj->clk);
+
+ iotlb_lock_get(obj, &saved);
+ memcpy(&l, &saved, sizeof(saved));
+
+ for (i = 0; i < obj->nr_tlb_entries; i++) {
+ struct cr_regs tmp;
+
+ iotlb_lock_get(obj, &l);
+ l.vict = i;
+ iotlb_lock_set(obj, &l);
+ iotlb_read_cr(obj, &tmp);
+ if (!iotlb_cr_valid(&tmp))
+ continue;
+
+ *p++ = tmp;
+ }
+ iotlb_lock_set(obj, &saved);
+ clk_disable(obj->clk);
+
+ return p - crs;
+}
+
+/**
+ * dump_tlb_entries - dump cr arrays to given buffer
+ * @obj: target iommu
+ * @buf: output buffer
+ **/
+size_t dump_tlb_entries(struct iommu *obj, char *buf)
+{
+ int i, n;
+ struct cr_regs *cr;
+ char *p = buf;
+
+ cr = kcalloc(obj->nr_tlb_entries, sizeof(*cr), GFP_KERNEL);
+ if (!cr)
+ return 0;
+
+ n = __dump_tlb_entries(obj, cr);
+ for (i = 0; i < n; i++)
+ p += iotlb_dump_cr(obj, cr + i, p);
+ kfree(cr);
+
+ return p - buf;
+}
+EXPORT_SYMBOL_GPL(dump_tlb_entries);
+
+int foreach_iommu_device(void *data, int (*fn)(struct device *, void *))
+{
+ return driver_for_each_device(&omap_iommu_driver.driver,
+ NULL, data, fn);
+}
+EXPORT_SYMBOL_GPL(foreach_iommu_device);
+
+#endif /* CONFIG_OMAP_IOMMU_DEBUG_MODULE */
+
+/*
+ * H/W pagetable operations
+ */
+static void flush_iopgd_range(u32 *first, u32 *last)
+{
+ /* FIXME: L2 cache should be taken care of if it exists */
+ do {
+ asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pgd"
+ : : "r" (first));
+ first += L1_CACHE_BYTES / sizeof(*first);
+ } while (first <= last);
+}
+
+static void flush_iopte_range(u32 *first, u32 *last)
+{
+ /* FIXME: L2 cache should be taken care of if it exists */
+ do {
+ asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pte"
+ : : "r" (first));
+ first += L1_CACHE_BYTES / sizeof(*first);
+ } while (first <= last);
+}
+
+static void iopte_free(u32 *iopte)
+{
+ /* Note: freed iopte's must be clean ready for re-use */
+ kmem_cache_free(iopte_cachep, iopte);
+}
+
+static u32 *iopte_alloc(struct iommu *obj, u32 *iopgd, u32 da)
+{
+ u32 *iopte;
+
+ /* a table has already existed */
+ if (*iopgd)
+ goto pte_ready;
+
+ /*
+ * do the allocation outside the page table lock
+ */
+ spin_unlock(&obj->page_table_lock);
+ iopte = kmem_cache_zalloc(iopte_cachep, GFP_KERNEL);
+ spin_lock(&obj->page_table_lock);
+
+ if (!*iopgd) {
+ if (!iopte)
+ return ERR_PTR(-ENOMEM);
+
+ *iopgd = virt_to_phys(iopte) | IOPGD_TABLE;
+ flush_iopgd_range(iopgd, iopgd);
+
+ dev_vdbg(obj->dev, "%s: a new pte:%p\n", __func__, iopte);
+ } else {
+ /* We raced, free the reduniovant table */
+ iopte_free(iopte);
+ }
+
+pte_ready:
+ iopte = iopte_offset(iopgd, da);
+
+ dev_vdbg(obj->dev,
+ "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+ __func__, da, iopgd, *iopgd, iopte, *iopte);
+
+ return iopte;
+}
+
+static int iopgd_alloc_section(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+ u32 *iopgd = iopgd_offset(obj, da);
+
+ *iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION;
+ flush_iopgd_range(iopgd, iopgd);
+ return 0;
+}
+
+static int iopgd_alloc_super(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+ u32 *iopgd = iopgd_offset(obj, da);
+ int i;
+
+ for (i = 0; i < 16; i++)
+ *(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER;
+ flush_iopgd_range(iopgd, iopgd + 15);
+ return 0;
+}
+
+static int iopte_alloc_page(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+ u32 *iopgd = iopgd_offset(obj, da);
+ u32 *iopte = iopte_alloc(obj, iopgd, da);
+
+ if (IS_ERR(iopte))
+ return PTR_ERR(iopte);
+
+ *iopte = (pa & IOPAGE_MASK) | prot | IOPTE_SMALL;
+ flush_iopte_range(iopte, iopte);
+
+ dev_vdbg(obj->dev, "%s: da:%08x pa:%08x pte:%p *pte:%08x\n",
+ __func__, da, pa, iopte, *iopte);
+
+ return 0;
+}
+
+static int iopte_alloc_large(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+ u32 *iopgd = iopgd_offset(obj, da);
+ u32 *iopte = iopte_alloc(obj, iopgd, da);
+ int i;
+
+ if (IS_ERR(iopte))
+ return PTR_ERR(iopte);
+
+ for (i = 0; i < 16; i++)
+ *(iopte + i) = (pa & IOLARGE_MASK) | prot | IOPTE_LARGE;
+ flush_iopte_range(iopte, iopte + 15);
+ return 0;
+}
+
+static int iopgtable_store_entry_core(struct iommu *obj, struct iotlb_entry *e)
+{
+ int (*fn)(struct iommu *, u32, u32, u32);
+ u32 prot;
+ int err;
+
+ if (!obj || !e)
+ return -EINVAL;
+
+ switch (e->pgsz) {
+ case MMU_CAM_PGSZ_16M:
+ fn = iopgd_alloc_super;
+ break;
+ case MMU_CAM_PGSZ_1M:
+ fn = iopgd_alloc_section;
+ break;
+ case MMU_CAM_PGSZ_64K:
+ fn = iopte_alloc_large;
+ break;
+ case MMU_CAM_PGSZ_4K:
+ fn = iopte_alloc_page;
+ break;
+ default:
+ fn = NULL;
+ BUG();
+ break;
+ }
+
+ prot = get_iopte_attr(e);
+
+ spin_lock(&obj->page_table_lock);
+ err = fn(obj, e->da, e->pa, prot);
+ spin_unlock(&obj->page_table_lock);
+
+ return err;
+}
+
+/**
+ * iopgtable_store_entry - Make an iommu pte entry
+ * @obj: target iommu
+ * @e: an iommu tlb entry info
+ **/
+int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e)
+{
+ int err;
+
+ flush_iotlb_page(obj, e->da);
+ err = iopgtable_store_entry_core(obj, e);
+#ifdef PREFETCH_IOTLB
+ if (!err)
+ load_iotlb_entry(obj, e);
+#endif
+ return err;
+}
+EXPORT_SYMBOL_GPL(iopgtable_store_entry);
+
+/**
+ * iopgtable_lookup_entry - Lookup an iommu pte entry
+ * @obj: target iommu
+ * @da: iommu device virtual address
+ * @ppgd: iommu pgd entry pointer to be returned
+ * @ppte: iommu pte entry pointer to be returned
+ **/
+void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, u32 **ppte)
+{
+ u32 *iopgd, *iopte = NULL;
+
+ iopgd = iopgd_offset(obj, da);
+ if (!*iopgd)
+ goto out;
+
+ if (*iopgd & IOPGD_TABLE)
+ iopte = iopte_offset(iopgd, da);
+out:
+ *ppgd = iopgd;
+ *ppte = iopte;
+}
+EXPORT_SYMBOL_GPL(iopgtable_lookup_entry);
+
+static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
+{
+ size_t bytes;
+ u32 *iopgd = iopgd_offset(obj, da);
+ int nent = 1;
+
+ if (!*iopgd)
+ return 0;
+
+ if (*iopgd & IOPGD_TABLE) {
+ int i;
+ u32 *iopte = iopte_offset(iopgd, da);
+
+ bytes = IOPTE_SIZE;
+ if (*iopte & IOPTE_LARGE) {
+ nent *= 16;
+ /* rewind to the 1st entry */
+ iopte = (u32 *)((u32)iopte & IOLARGE_MASK);
+ }
+ bytes *= nent;
+ memset(iopte, 0, nent * sizeof(*iopte));
+ flush_iopte_range(iopte, iopte + (nent - 1) * sizeof(*iopte));
+
+ /*
+ * do table walk to check if this table is necessary or not
+ */
+ iopte = iopte_offset(iopgd, 0);
+ for (i = 0; i < PTRS_PER_IOPTE; i++)
+ if (iopte[i])
+ goto out;
+
+ iopte_free(iopte);
+ nent = 1; /* for the next L1 entry */
+ } else {
+ bytes = IOPGD_SIZE;
+ if (*iopgd & IOPGD_SUPER) {
+ nent *= 16;
+ /* rewind to the 1st entry */
+ iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
+ }
+ bytes *= nent;
+ }
+ memset(iopgd, 0, nent * sizeof(*iopgd));
+ flush_iopgd_range(iopgd, iopgd + (nent - 1) * sizeof(*iopgd));
+out:
+ return bytes;
+}
+
+/**
+ * iopgtable_clear_entry - Remove an iommu pte entry
+ * @obj: target iommu
+ * @da: iommu device virtual address
+ **/
+size_t iopgtable_clear_entry(struct iommu *obj, u32 da)
+{
+ size_t bytes;
+
+ spin_lock(&obj->page_table_lock);
+
+ bytes = iopgtable_clear_entry_core(obj, da);
+ flush_iotlb_page(obj, da);
+
+ spin_unlock(&obj->page_table_lock);
+
+ return bytes;
+}
+EXPORT_SYMBOL_GPL(iopgtable_clear_entry);
+
+static void iopgtable_clear_entry_all(struct iommu *obj)
+{
+ int i;
+
+ spin_lock(&obj->page_table_lock);
+
+ for (i = 0; i < PTRS_PER_IOPGD; i++) {
+ u32 da;
+ u32 *iopgd;
+
+ da = i << IOPGD_SHIFT;
+ iopgd = iopgd_offset(obj, da);
+
+ if (!*iopgd)
+ continue;
+
+ if (*iopgd & IOPGD_TABLE)
+ iopte_free(iopte_offset(iopgd, 0));
+
+ *iopgd = 0;
+ flush_iopgd_range(iopgd, iopgd);
+ }
+
+ flush_iotlb_all(obj);
+
+ spin_unlock(&obj->page_table_lock);
+}
+
+/*
+ * Device IOMMU generic operations
+ */
+static irqreturn_t iommu_fault_handler(int irq, void *data)
+{
+ u32 stat, da;
+ u32 *iopgd, *iopte;
+ int err = -EIO;
+ struct iommu *obj = data;
+
+ if (!obj->refcount)
+ return IRQ_NONE;
+
+ /* Dynamic loading TLB or PTE */
+ if (obj->isr)
+ err = obj->isr(obj);
+
+ if (!err)
+ return IRQ_HANDLED;
+
+ clk_enable(obj->clk);
+ stat = iommu_report_fault(obj, &da);
+ clk_disable(obj->clk);
+ if (!stat)
+ return IRQ_HANDLED;
+
+ iopgd = iopgd_offset(obj, da);
+
+ if (!(*iopgd & IOPGD_TABLE)) {
+ dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", __func__,
+ da, iopgd, *iopgd);
+ return IRQ_NONE;
+ }
+
+ iopte = iopte_offset(iopgd, da);
+
+ dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+ __func__, da, iopgd, *iopgd, iopte, *iopte);
+
+ return IRQ_NONE;
+}
+
+static int device_match_by_alias(struct device *dev, void *data)
+{
+ struct iommu *obj = to_iommu(dev);
+ const char *name = data;
+
+ pr_debug("%s: %s %s\n", __func__, obj->name, name);
+
+ return strcmp(obj->name, name) == 0;
+}
+
+/**
+ * iommu_get - Get iommu handler
+ * @name: target iommu name
+ **/
+struct iommu *iommu_get(const char *name)
+{
+ int err = -ENOMEM;
+ struct device *dev;
+ struct iommu *obj;
+
+ dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name,
+ device_match_by_alias);
+ if (!dev)
+ return ERR_PTR(-ENODEV);
+
+ obj = to_iommu(dev);
+
+ mutex_lock(&obj->iommu_lock);
+
+ if (obj->refcount++ == 0) {
+ err = iommu_enable(obj);
+ if (err)
+ goto err_enable;
+ flush_iotlb_all(obj);
+ }
+
+ if (!try_module_get(obj->owner))
+ goto err_module;
+
+ mutex_unlock(&obj->iommu_lock);
+
+ dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+ return obj;
+
+err_module:
+ if (obj->refcount == 1)
+ iommu_disable(obj);
+err_enable:
+ obj->refcount--;
+ mutex_unlock(&obj->iommu_lock);
+ return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(iommu_get);
+
+/**
+ * iommu_put - Put back iommu handler
+ * @obj: target iommu
+ **/
+void iommu_put(struct iommu *obj)
+{
+ if (!obj && IS_ERR(obj))
+ return;
+
+ mutex_lock(&obj->iommu_lock);
+
+ if (--obj->refcount == 0)
+ iommu_disable(obj);
+
+ module_put(obj->owner);
+
+ mutex_unlock(&obj->iommu_lock);
+
+ dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+}
+EXPORT_SYMBOL_GPL(iommu_put);
+
+/*
+ * OMAP Device MMU(IOMMU) detection
+ */
+static int __devinit omap_iommu_probe(struct platform_device *pdev)
+{
+ int err = -ENODEV;
+ void *p;
+ int irq;
+ struct iommu *obj;
+ struct resource *res;
+ struct iommu_platform_data *pdata = pdev->dev.platform_data;
+
+ if (pdev->num_resources != 2)
+ return -EINVAL;
+
+ obj = kzalloc(sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL);
+ if (!obj)
+ return -ENOMEM;
+
+ obj->clk = clk_get(&pdev->dev, pdata->clk_name);
+ if (IS_ERR(obj->clk))
+ goto err_clk;
+
+ obj->nr_tlb_entries = pdata->nr_tlb_entries;
+ obj->name = pdata->name;
+ obj->dev = &pdev->dev;
+ obj->ctx = (void *)obj + sizeof(*obj);
+
+ mutex_init(&obj->iommu_lock);
+ mutex_init(&obj->mmap_lock);
+ spin_lock_init(&obj->page_table_lock);
+ INIT_LIST_HEAD(&obj->mmap);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ err = -ENODEV;
+ goto err_mem;
+ }
+ obj->regbase = ioremap(res->start, resource_size(res));
+ if (!obj->regbase) {
+ err = -ENOMEM;
+ goto err_mem;
+ }
+
+ res = request_mem_region(res->start, resource_size(res),
+ dev_name(&pdev->dev));
+ if (!res) {
+ err = -EIO;
+ goto err_mem;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ err = -ENODEV;
+ goto err_irq;
+ }
+ err = request_irq(irq, iommu_fault_handler, IRQF_SHARED,
+ dev_name(&pdev->dev), obj);
+ if (err < 0)
+ goto err_irq;
+ platform_set_drvdata(pdev, obj);
+
+ p = (void *)__get_free_pages(GFP_KERNEL, get_order(IOPGD_TABLE_SIZE));
+ if (!p) {
+ err = -ENOMEM;
+ goto err_pgd;
+ }
+ memset(p, 0, IOPGD_TABLE_SIZE);
+ clean_dcache_area(p, IOPGD_TABLE_SIZE);
+ obj->iopgd = p;
+
+ BUG_ON(!IS_ALIGNED((unsigned long)obj->iopgd, IOPGD_TABLE_SIZE));
+
+ dev_info(&pdev->dev, "%s registered\n", obj->name);
+ return 0;
+
+err_pgd:
+ free_irq(irq, obj);
+err_irq:
+ release_mem_region(res->start, resource_size(res));
+ iounmap(obj->regbase);
+err_mem:
+ clk_put(obj->clk);
+err_clk:
+ kfree(obj);
+ return err;
+}
+
+static int __devexit omap_iommu_remove(struct platform_device *pdev)
+{
+ int irq;
+ struct resource *res;
+ struct iommu *obj = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ iopgtable_clear_entry_all(obj);
+ free_pages((unsigned long)obj->iopgd, get_order(IOPGD_TABLE_SIZE));
+
+ irq = platform_get_irq(pdev, 0);
+ free_irq(irq, obj);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
+ iounmap(obj->regbase);
+
+ clk_put(obj->clk);
+ dev_info(&pdev->dev, "%s removed\n", obj->name);
+ kfree(obj);
+ return 0;
+}
+
+static struct platform_driver omap_iommu_driver = {
+ .probe = omap_iommu_probe,
+ .remove = __devexit_p(omap_iommu_remove),
+ .driver = {
+ .name = "omap-iommu",
+ },
+};
+
+static void iopte_cachep_ctor(void *iopte)
+{
+ clean_dcache_area(iopte, IOPTE_TABLE_SIZE);
+}
+
+static int __init omap_iommu_init(void)
+{
+ struct kmem_cache *p;
+ const unsigned long flags = SLAB_HWCACHE_ALIGN;
+ size_t align = 1 << 10; /* L2 pagetable alignement */
+
+ p = kmem_cache_create("iopte_cache", IOPTE_TABLE_SIZE, align, flags,
+ iopte_cachep_ctor);
+ if (!p)
+ return -ENOMEM;
+ iopte_cachep = p;
+
+ return platform_driver_register(&omap_iommu_driver);
+}
+module_init(omap_iommu_init);
+
+static void __exit omap_iommu_exit(void)
+{
+ kmem_cache_destroy(iopte_cachep);
+
+ platform_driver_unregister(&omap_iommu_driver);
+}
+module_exit(omap_iommu_exit);
+
+MODULE_DESCRIPTION("omap iommu: tlb and pagetable primitives");
+MODULE_ALIAS("platform:omap-iommu");
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/iopgtable.h
new file mode 100644
index 0000000..37dac43
--- /dev/null
+++ b/arch/arm/plat-omap/iopgtable.h
@@ -0,0 +1,72 @@
+/*
+ * omap iommu: pagetable definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_OMAP_IOMMU_H
+#define __PLAT_OMAP_IOMMU_H
+
+#define IOPGD_SHIFT 20
+#define IOPGD_SIZE (1 << IOPGD_SHIFT)
+#define IOPGD_MASK (~(IOPGD_SIZE - 1))
+#define IOSECTION_MASK IOPGD_MASK
+#define PTRS_PER_IOPGD (1 << (32 - IOPGD_SHIFT))
+#define IOPGD_TABLE_SIZE (PTRS_PER_IOPGD * sizeof(u32))
+
+#define IOSUPER_SIZE (IOPGD_SIZE << 4)
+#define IOSUPER_MASK (~(IOSUPER_SIZE - 1))
+
+#define IOPTE_SHIFT 12
+#define IOPTE_SIZE (1 << IOPTE_SHIFT)
+#define IOPTE_MASK (~(IOPTE_SIZE - 1))
+#define IOPAGE_MASK IOPTE_MASK
+#define PTRS_PER_IOPTE (1 << (IOPGD_SHIFT - IOPTE_SHIFT))
+#define IOPTE_TABLE_SIZE (PTRS_PER_IOPTE * sizeof(u32))
+
+#define IOLARGE_SIZE (IOPTE_SIZE << 4)
+#define IOLARGE_MASK (~(IOLARGE_SIZE - 1))
+
+#define IOPGD_TABLE (1 << 0)
+#define IOPGD_SECTION (2 << 0)
+#define IOPGD_SUPER (1 << 18 | 2 << 0)
+
+#define IOPTE_SMALL (2 << 0)
+#define IOPTE_LARGE (1 << 0)
+
+#define iopgd_index(da) (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
+#define iopgd_offset(obj, da) ((obj)->iopgd + iopgd_index(da))
+
+#define iopte_paddr(iopgd) (*iopgd & ~((1 << 10) - 1))
+#define iopte_vaddr(iopgd) ((u32 *)phys_to_virt(iopte_paddr(iopgd)))
+
+#define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
+#define iopte_offset(iopgd, da) (iopte_vaddr(iopgd) + iopte_index(da))
+
+static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
+ u32 flags)
+{
+ memset(e, 0, sizeof(*e));
+
+ e->da = da;
+ e->pa = pa;
+ e->valid = 1;
+ /* FIXME: add OMAP1 support */
+ e->pgsz = flags & MMU_CAM_PGSZ_MASK;
+ e->endian = flags & MMU_RAM_ENDIAN_MASK;
+ e->elsz = flags & MMU_RAM_ELSZ_MASK;
+ e->mixed = flags & MMU_RAM_MIXED_MASK;
+
+ return iopgsz_to_bytes(e->pgsz);
+}
+
+#define to_iommu(dev) \
+ (struct iommu *)platform_get_drvdata(to_platform_device(dev))
+
+#endif /* __PLAT_OMAP_IOMMU_H */
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
new file mode 100644
index 0000000..2fce2c1
--- /dev/null
+++ b/arch/arm/plat-omap/iovmm.c
@@ -0,0 +1,896 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/vmalloc.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
+
+#include <asm/cacheflush.h>
+#include <asm/mach/map.h>
+
+#include <mach/iommu.h>
+#include <mach/iovmm.h>
+
+#include "iopgtable.h"
+
+/*
+ * A device driver needs to create address mappings between:
+ *
+ * - iommu/device address
+ * - physical address
+ * - mpu virtual address
+ *
+ * There are 4 possible patterns for them:
+ *
+ * |iova/ mapping iommu_ page
+ * | da pa va (d)-(p)-(v) function type
+ * ---------------------------------------------------------------------------
+ * 1 | c c c 1 - 1 - 1 _kmap() / _kunmap() s
+ * 2 | c c,a c 1 - 1 - 1 _kmalloc()/ _kfree() s
+ * 3 | c d c 1 - n - 1 _vmap() / _vunmap() s
+ * 4 | c d,a c 1 - n - 1 _vmalloc()/ _vfree() n*
+ *
+ *
+ * 'iova': device iommu virtual address
+ * 'da': alias of 'iova'
+ * 'pa': physical address
+ * 'va': mpu virtual address
+ *
+ * 'c': contiguous memory area
+ * 'd': dicontiguous memory area
+ * 'a': anonymous memory allocation
+ * '()': optional feature
+ *
+ * 'n': a normal page(4KB) size is used.
+ * 's': multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used.
+ *
+ * '*': not yet, but feasible.
+ */
+
+static struct kmem_cache *iovm_area_cachep;
+
+/* return total bytes of sg buffers */
+static size_t sgtable_len(const struct sg_table *sgt)
+{
+ unsigned int i, total = 0;
+ struct scatterlist *sg;
+
+ if (!sgt)
+ return 0;
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ size_t bytes;
+
+ bytes = sg_dma_len(sg);
+
+ if (!iopgsz_ok(bytes)) {
+ pr_err("%s: sg[%d] not iommu pagesize(%x)\n",
+ __func__, i, bytes);
+ return 0;
+ }
+
+ total += bytes;
+ }
+
+ return total;
+}
+#define sgtable_ok(x) (!!sgtable_len(x))
+
+/*
+ * calculate the optimal number sg elements from total bytes based on
+ * iommu superpages
+ */
+static unsigned int sgtable_nents(size_t bytes)
+{
+ int i;
+ unsigned int nr_entries;
+ const unsigned long pagesize[] = { SZ_16M, SZ_1M, SZ_64K, SZ_4K, };
+
+ if (!IS_ALIGNED(bytes, PAGE_SIZE)) {
+ pr_err("%s: wrong size %08x\n", __func__, bytes);
+ return 0;
+ }
+
+ nr_entries = 0;
+ for (i = 0; i < ARRAY_SIZE(pagesize); i++) {
+ if (bytes >= pagesize[i]) {
+ nr_entries += (bytes / pagesize[i]);
+ bytes %= pagesize[i];
+ }
+ }
+ BUG_ON(bytes);
+
+ return nr_entries;
+}
+
+/* allocate and initialize sg_table header(a kind of 'superblock') */
+static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags)
+{
+ unsigned int nr_entries;
+ int err;
+ struct sg_table *sgt;
+
+ if (!bytes)
+ return ERR_PTR(-EINVAL);
+
+ if (!IS_ALIGNED(bytes, PAGE_SIZE))
+ return ERR_PTR(-EINVAL);
+
+ /* FIXME: IOVMF_DA_FIXED should support 'superpages' */
+ if ((flags & IOVMF_LINEAR) && (flags & IOVMF_DA_ANON)) {
+ nr_entries = sgtable_nents(bytes);
+ if (!nr_entries)
+ return ERR_PTR(-EINVAL);
+ } else
+ nr_entries = bytes / PAGE_SIZE;
+
+ sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
+ if (!sgt)
+ return ERR_PTR(-ENOMEM);
+
+ err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
+ if (err)
+ return ERR_PTR(err);
+
+ pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
+
+ return sgt;
+}
+
+/* free sg_table header(a kind of superblock) */
+static void sgtable_free(struct sg_table *sgt)
+{
+ if (!sgt)
+ return;
+
+ sg_free_table(sgt);
+ kfree(sgt);
+
+ pr_debug("%s: sgt:%p\n", __func__, sgt);
+}
+
+/* map 'sglist' to a contiguous mpu virtual area and return 'va' */
+static void *vmap_sg(const struct sg_table *sgt)
+{
+ u32 va;
+ size_t total;
+ unsigned int i;
+ struct scatterlist *sg;
+ struct vm_struct *new;
+ const struct mem_type *mtype;
+
+ mtype = get_mem_type(MT_DEVICE);
+ if (!mtype)
+ return ERR_PTR(-EINVAL);
+
+ total = sgtable_len(sgt);
+ if (!total)
+ return ERR_PTR(-EINVAL);
+
+ new = __get_vm_area(total, VM_IOREMAP, VMALLOC_START, VMALLOC_END);
+ if (!new)
+ return ERR_PTR(-ENOMEM);
+ va = (u32)new->addr;
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ size_t bytes;
+ u32 pa;
+ int err;
+
+ pa = sg_phys(sg);
+ bytes = sg_dma_len(sg);
+
+ BUG_ON(bytes != PAGE_SIZE);
+
+ err = ioremap_page(va, pa, mtype);
+ if (err)
+ goto err_out;
+
+ va += bytes;
+ }
+
+ flush_cache_vmap(new->addr, total);
+ return new->addr;
+
+err_out:
+ WARN_ON(1); /* FIXME: cleanup some mpu mappings */
+ vunmap(new->addr);
+ return ERR_PTR(-EAGAIN);
+}
+
+static inline void vunmap_sg(const void *va)
+{
+ vunmap(va);
+}
+
+static struct iovm_struct *__find_iovm_area(struct iommu *obj, const u32 da)
+{
+ struct iovm_struct *tmp;
+
+ list_for_each_entry(tmp, &obj->mmap, list) {
+ if ((da >= tmp->da_start) && (da < tmp->da_end)) {
+ size_t len;
+
+ len = tmp->da_end - tmp->da_start;
+
+ dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n",
+ __func__, tmp->da_start, da, tmp->da_end, len,
+ tmp->flags);
+
+ return tmp;
+ }
+ }
+
+ return NULL;
+}
+
+/**
+ * find_iovm_area - find iovma which includes @da
+ * @da: iommu device virtual address
+ *
+ * Find the existing iovma starting at @da
+ */
+struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da)
+{
+ struct iovm_struct *area;
+
+ mutex_lock(&obj->mmap_lock);
+ area = __find_iovm_area(obj, da);
+ mutex_unlock(&obj->mmap_lock);
+
+ return area;
+}
+EXPORT_SYMBOL_GPL(find_iovm_area);
+
+/*
+ * This finds the hole(area) which fits the requested address and len
+ * in iovmas mmap, and returns the new allocated iovma.
+ */
+static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da,
+ size_t bytes, u32 flags)
+{
+ struct iovm_struct *new, *tmp;
+ u32 start, prev_end, alignement;
+
+ if (!obj || !bytes)
+ return ERR_PTR(-EINVAL);
+
+ start = da;
+ alignement = PAGE_SIZE;
+
+ if (flags & IOVMF_DA_ANON) {
+ /*
+ * Reserve the first page for NULL
+ */
+ start = PAGE_SIZE;
+ if (flags & IOVMF_LINEAR)
+ alignement = iopgsz_max(bytes);
+ start = roundup(start, alignement);
+ }
+
+ tmp = NULL;
+ if (list_empty(&obj->mmap))
+ goto found;
+
+ prev_end = 0;
+ list_for_each_entry(tmp, &obj->mmap, list) {
+
+ if ((prev_end <= start) && (start + bytes < tmp->da_start))
+ goto found;
+
+ if (flags & IOVMF_DA_ANON)
+ start = roundup(tmp->da_end, alignement);
+
+ prev_end = tmp->da_end;
+ }
+
+ if ((start >= prev_end) && (ULONG_MAX - start >= bytes))
+ goto found;
+
+ dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n",
+ __func__, da, bytes, flags);
+
+ return ERR_PTR(-EINVAL);
+
+found:
+ new = kmem_cache_zalloc(iovm_area_cachep, GFP_KERNEL);
+ if (!new)
+ return ERR_PTR(-ENOMEM);
+
+ new->iommu = obj;
+ new->da_start = start;
+ new->da_end = start + bytes;
+ new->flags = flags;
+
+ /*
+ * keep ascending order of iovmas
+ */
+ if (tmp)
+ list_add_tail(&new->list, &tmp->list);
+ else
+ list_add(&new->list, &obj->mmap);
+
+ dev_dbg(obj->dev, "%s: found %08x-%08x-%08x(%x) %08x\n",
+ __func__, new->da_start, start, new->da_end, bytes, flags);
+
+ return new;
+}
+
+static void free_iovm_area(struct iommu *obj, struct iovm_struct *area)
+{
+ size_t bytes;
+
+ BUG_ON(!obj || !area);
+
+ bytes = area->da_end - area->da_start;
+
+ dev_dbg(obj->dev, "%s: %08x-%08x(%x) %08x\n",
+ __func__, area->da_start, area->da_end, bytes, area->flags);
+
+ list_del(&area->list);
+ kmem_cache_free(iovm_area_cachep, area);
+}
+
+/**
+ * da_to_va - convert (d) to (v)
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ * @va: mpu virtual address
+ *
+ * Returns mpu virtual addr which corresponds to a given device virtual addr
+ */
+void *da_to_va(struct iommu *obj, u32 da)
+{
+ void *va = NULL;
+ struct iovm_struct *area;
+
+ mutex_lock(&obj->mmap_lock);
+
+ area = __find_iovm_area(obj, da);
+ if (!area) {
+ dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+ goto out;
+ }
+ va = area->va;
+ mutex_unlock(&obj->mmap_lock);
+out:
+ return va;
+}
+EXPORT_SYMBOL_GPL(da_to_va);
+
+static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va)
+{
+ unsigned int i;
+ struct scatterlist *sg;
+ void *va = _va;
+ void *va_end;
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ struct page *pg;
+ const size_t bytes = PAGE_SIZE;
+
+ /*
+ * iommu 'superpage' isn't supported with 'iommu_vmalloc()'
+ */
+ pg = vmalloc_to_page(va);
+ BUG_ON(!pg);
+ sg_set_page(sg, pg, bytes, 0);
+
+ va += bytes;
+ }
+
+ va_end = _va + PAGE_SIZE * i;
+ flush_cache_vmap(_va, va_end);
+}
+
+static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
+{
+ /*
+ * Actually this is not necessary at all, just exists for
+ * consistency of the code readibility.
+ */
+ BUG_ON(!sgt);
+}
+
+static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len)
+{
+ unsigned int i;
+ struct scatterlist *sg;
+ void *va;
+
+ va = phys_to_virt(pa);
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ size_t bytes;
+
+ bytes = iopgsz_max(len);
+
+ BUG_ON(!iopgsz_ok(bytes));
+
+ sg_set_buf(sg, phys_to_virt(pa), bytes);
+ /*
+ * 'pa' is cotinuous(linear).
+ */
+ pa += bytes;
+ len -= bytes;
+ }
+ BUG_ON(len);
+
+ clean_dcache_area(va, len);
+}
+
+static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
+{
+ /*
+ * Actually this is not necessary at all, just exists for
+ * consistency of the code readibility
+ */
+ BUG_ON(!sgt);
+}
+
+/* create 'da' <-> 'pa' mapping from 'sgt' */
+static int map_iovm_area(struct iommu *obj, struct iovm_struct *new,
+ const struct sg_table *sgt, u32 flags)
+{
+ int err;
+ unsigned int i, j;
+ struct scatterlist *sg;
+ u32 da = new->da_start;
+
+ if (!obj || !new || !sgt)
+ return -EINVAL;
+
+ BUG_ON(!sgtable_ok(sgt));
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ u32 pa;
+ int pgsz;
+ size_t bytes;
+ struct iotlb_entry e;
+
+ pa = sg_phys(sg);
+ bytes = sg_dma_len(sg);
+
+ flags &= ~IOVMF_PGSZ_MASK;
+ pgsz = bytes_to_iopgsz(bytes);
+ if (pgsz < 0)
+ goto err_out;
+ flags |= pgsz;
+
+ pr_debug("%s: [%d] %08x %08x(%x)\n", __func__,
+ i, da, pa, bytes);
+
+ iotlb_init_entry(&e, da, pa, flags);
+ err = iopgtable_store_entry(obj, &e);
+ if (err)
+ goto err_out;
+
+ da += bytes;
+ }
+ return 0;
+
+err_out:
+ da = new->da_start;
+
+ for_each_sg(sgt->sgl, sg, i, j) {
+ size_t bytes;
+
+ bytes = iopgtable_clear_entry(obj, da);
+
+ BUG_ON(!iopgsz_ok(bytes));
+
+ da += bytes;
+ }
+ return err;
+}
+
+/* release 'da' <-> 'pa' mapping */
+static void unmap_iovm_area(struct iommu *obj, struct iovm_struct *area)
+{
+ u32 start;
+ size_t total = area->da_end - area->da_start;
+
+ BUG_ON((!total) || !IS_ALIGNED(total, PAGE_SIZE));
+
+ start = area->da_start;
+ while (total > 0) {
+ size_t bytes;
+
+ bytes = iopgtable_clear_entry(obj, start);
+ if (bytes == 0)
+ bytes = PAGE_SIZE;
+ else
+ dev_dbg(obj->dev, "%s: unmap %08x(%x) %08x\n",
+ __func__, start, bytes, area->flags);
+
+ BUG_ON(!IS_ALIGNED(bytes, PAGE_SIZE));
+
+ total -= bytes;
+ start += bytes;
+ }
+ BUG_ON(total);
+}
+
+/* template function for all unmapping */
+static struct sg_table *unmap_vm_area(struct iommu *obj, const u32 da,
+ void (*fn)(const void *), u32 flags)
+{
+ struct sg_table *sgt = NULL;
+ struct iovm_struct *area;
+
+ if (!IS_ALIGNED(da, PAGE_SIZE)) {
+ dev_err(obj->dev, "%s: alignment err(%08x)\n", __func__, da);
+ return NULL;
+ }
+
+ mutex_lock(&obj->mmap_lock);
+
+ area = __find_iovm_area(obj, da);
+ if (!area) {
+ dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+ goto out;
+ }
+
+ if ((area->flags & flags) != flags) {
+ dev_err(obj->dev, "%s: wrong flags(%08x)\n", __func__,
+ area->flags);
+ goto out;
+ }
+ sgt = (struct sg_table *)area->sgt;
+
+ unmap_iovm_area(obj, area);
+
+ fn(area->va);
+
+ dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", __func__,
+ area->da_start, da, area->da_end,
+ area->da_end - area->da_start, area->flags);
+
+ free_iovm_area(obj, area);
+out:
+ mutex_unlock(&obj->mmap_lock);
+
+ return sgt;
+}
+
+static u32 map_iommu_region(struct iommu *obj, u32 da,
+ const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
+{
+ int err = -ENOMEM;
+ struct iovm_struct *new;
+
+ mutex_lock(&obj->mmap_lock);
+
+ new = alloc_iovm_area(obj, da, bytes, flags);
+ if (IS_ERR(new)) {
+ err = PTR_ERR(new);
+ goto err_alloc_iovma;
+ }
+ new->va = va;
+ new->sgt = sgt;
+
+ if (map_iovm_area(obj, new, sgt, new->flags))
+ goto err_map;
+
+ mutex_unlock(&obj->mmap_lock);
+
+ dev_dbg(obj->dev, "%s: da:%08x(%x) flags:%08x va:%p\n",
+ __func__, new->da_start, bytes, new->flags, va);
+
+ return new->da_start;
+
+err_map:
+ free_iovm_area(obj, new);
+err_alloc_iovma:
+ mutex_unlock(&obj->mmap_lock);
+ return err;
+}
+
+static inline u32 __iommu_vmap(struct iommu *obj, u32 da,
+ const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
+{
+ return map_iommu_region(obj, da, sgt, va, bytes, flags);
+}
+
+/**
+ * iommu_vmap - (d)-(p)-(v) address mapper
+ * @obj: objective iommu
+ * @sgt: address of scatter gather table
+ * @flags: iovma and page property
+ *
+ * Creates 1-n-1 mapping with given @sgt and returns @da.
+ * All @sgt element must be io page size aligned.
+ */
+u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
+ u32 flags)
+{
+ size_t bytes;
+ void *va;
+
+ if (!obj || !obj->dev || !sgt)
+ return -EINVAL;
+
+ bytes = sgtable_len(sgt);
+ if (!bytes)
+ return -EINVAL;
+ bytes = PAGE_ALIGN(bytes);
+
+ va = vmap_sg(sgt);
+ if (IS_ERR(va))
+ return PTR_ERR(va);
+
+ flags &= IOVMF_HW_MASK;
+ flags |= IOVMF_DISCONT;
+ flags |= IOVMF_MMIO;
+ flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+ da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
+ if (IS_ERR_VALUE(da))
+ vunmap_sg(va);
+
+ return da;
+}
+EXPORT_SYMBOL_GPL(iommu_vmap);
+
+/**
+ * iommu_vunmap - release virtual mapping obtained by 'iommu_vmap()'
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ *
+ * Free the iommu virtually contiguous memory area starting at
+ * @da, which was returned by 'iommu_vmap()'.
+ */
+struct sg_table *iommu_vunmap(struct iommu *obj, u32 da)
+{
+ struct sg_table *sgt;
+ /*
+ * 'sgt' is allocated before 'iommu_vmalloc()' is called.
+ * Just returns 'sgt' to the caller to free
+ */
+ sgt = unmap_vm_area(obj, da, vunmap_sg, IOVMF_DISCONT | IOVMF_MMIO);
+ if (!sgt)
+ dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+ return sgt;
+}
+EXPORT_SYMBOL_GPL(iommu_vunmap);
+
+/**
+ * iommu_vmalloc - (d)-(p)-(v) address allocator and mapper
+ * @obj: objective iommu
+ * @da: contiguous iommu virtual memory
+ * @bytes: allocation size
+ * @flags: iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-n-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
+{
+ void *va;
+ struct sg_table *sgt;
+
+ if (!obj || !obj->dev || !bytes)
+ return -EINVAL;
+
+ bytes = PAGE_ALIGN(bytes);
+
+ va = vmalloc(bytes);
+ if (!va)
+ return -ENOMEM;
+
+ sgt = sgtable_alloc(bytes, flags);
+ if (IS_ERR(sgt)) {
+ da = PTR_ERR(sgt);
+ goto err_sgt_alloc;
+ }
+ sgtable_fill_vmalloc(sgt, va);
+
+ flags &= IOVMF_HW_MASK;
+ flags |= IOVMF_DISCONT;
+ flags |= IOVMF_ALLOC;
+ flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+ da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
+ if (IS_ERR_VALUE(da))
+ goto err_iommu_vmap;
+
+ return da;
+
+err_iommu_vmap:
+ sgtable_drain_vmalloc(sgt);
+ sgtable_free(sgt);
+err_sgt_alloc:
+ vfree(va);
+ return da;
+}
+EXPORT_SYMBOL_GPL(iommu_vmalloc);
+
+/**
+ * iommu_vfree - release memory allocated by 'iommu_vmalloc()'
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ *
+ * Frees the iommu virtually continuous memory area starting at
+ * @da, as obtained from 'iommu_vmalloc()'.
+ */
+void iommu_vfree(struct iommu *obj, const u32 da)
+{
+ struct sg_table *sgt;
+
+ sgt = unmap_vm_area(obj, da, vfree, IOVMF_DISCONT | IOVMF_ALLOC);
+ if (!sgt)
+ dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+ sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_vfree);
+
+static u32 __iommu_kmap(struct iommu *obj, u32 da, u32 pa, void *va,
+ size_t bytes, u32 flags)
+{
+ struct sg_table *sgt;
+
+ sgt = sgtable_alloc(bytes, flags);
+ if (IS_ERR(sgt))
+ return PTR_ERR(sgt);
+
+ sgtable_fill_kmalloc(sgt, pa, bytes);
+
+ da = map_iommu_region(obj, da, sgt, va, bytes, flags);
+ if (IS_ERR_VALUE(da)) {
+ sgtable_drain_kmalloc(sgt);
+ sgtable_free(sgt);
+ }
+
+ return da;
+}
+
+/**
+ * iommu_kmap - (d)-(p)-(v) address mapper
+ * @obj: objective iommu
+ * @da: contiguous iommu virtual memory
+ * @pa: contiguous physical memory
+ * @flags: iovma and page property
+ *
+ * Creates 1-1-1 mapping and returns @da again, which can be
+ * adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
+ u32 flags)
+{
+ void *va;
+
+ if (!obj || !obj->dev || !bytes)
+ return -EINVAL;
+
+ bytes = PAGE_ALIGN(bytes);
+
+ va = ioremap(pa, bytes);
+ if (!va)
+ return -ENOMEM;
+
+ flags &= IOVMF_HW_MASK;
+ flags |= IOVMF_LINEAR;
+ flags |= IOVMF_MMIO;
+ flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+ da = __iommu_kmap(obj, da, pa, va, bytes, flags);
+ if (IS_ERR_VALUE(da))
+ iounmap(va);
+
+ return da;
+}
+EXPORT_SYMBOL_GPL(iommu_kmap);
+
+/**
+ * iommu_kunmap - release virtual mapping obtained by 'iommu_kmap()'
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ *
+ * Frees the iommu virtually contiguous memory area starting at
+ * @da, which was passed to and was returned by'iommu_kmap()'.
+ */
+void iommu_kunmap(struct iommu *obj, u32 da)
+{
+ struct sg_table *sgt;
+ typedef void (*func_t)(const void *);
+
+ sgt = unmap_vm_area(obj, da, (func_t)__iounmap,
+ IOVMF_LINEAR | IOVMF_MMIO);
+ if (!sgt)
+ dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+ sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_kunmap);
+
+/**
+ * iommu_kmalloc - (d)-(p)-(v) address allocator and mapper
+ * @obj: objective iommu
+ * @da: contiguous iommu virtual memory
+ * @bytes: bytes for allocation
+ * @flags: iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-1-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
+{
+ void *va;
+ u32 pa;
+
+ if (!obj || !obj->dev || !bytes)
+ return -EINVAL;
+
+ bytes = PAGE_ALIGN(bytes);
+
+ va = kmalloc(bytes, GFP_KERNEL | GFP_DMA);
+ if (!va)
+ return -ENOMEM;
+ pa = virt_to_phys(va);
+
+ flags &= IOVMF_HW_MASK;
+ flags |= IOVMF_LINEAR;
+ flags |= IOVMF_ALLOC;
+ flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+ da = __iommu_kmap(obj, da, pa, va, bytes, flags);
+ if (IS_ERR_VALUE(da))
+ kfree(va);
+
+ return da;
+}
+EXPORT_SYMBOL_GPL(iommu_kmalloc);
+
+/**
+ * iommu_kfree - release virtual mapping obtained by 'iommu_kmalloc()'
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ *
+ * Frees the iommu virtually contiguous memory area starting at
+ * @da, which was passed to and was returned by'iommu_kmalloc()'.
+ */
+void iommu_kfree(struct iommu *obj, u32 da)
+{
+ struct sg_table *sgt;
+
+ sgt = unmap_vm_area(obj, da, kfree, IOVMF_LINEAR | IOVMF_ALLOC);
+ if (!sgt)
+ dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+ sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_kfree);
+
+
+static int __init iovmm_init(void)
+{
+ const unsigned long flags = SLAB_HWCACHE_ALIGN;
+ struct kmem_cache *p;
+
+ p = kmem_cache_create("iovm_area_cache", sizeof(struct iovm_struct), 0,
+ flags, NULL);
+ if (!p)
+ return -ENOMEM;
+ iovm_area_cachep = p;
+
+ return 0;
+}
+module_init(iovmm_init);
+
+static void __exit iovmm_exit(void)
+{
+ kmem_cache_destroy(iovm_area_cachep);
+}
+module_exit(iovmm_exit);
+
+MODULE_DESCRIPTION("omap iommu: simple virtual address space management");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 28b0a82..efa0e01 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -91,11 +91,20 @@ static void omap_mcbsp_dump_reg(u8 id)
static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
{
struct omap_mcbsp *mcbsp_tx = dev_id;
+ u16 irqst_spcr2;
- dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n",
- OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+ irqst_spcr2 = OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2);
+ dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2);
- complete(&mcbsp_tx->tx_irq_completion);
+ if (irqst_spcr2 & XSYNC_ERR) {
+ dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n",
+ irqst_spcr2);
+ /* Writing zero to XSYNC_ERR clears the IRQ */
+ OMAP_MCBSP_WRITE(mcbsp_tx->io_base, SPCR2,
+ irqst_spcr2 & ~(XSYNC_ERR));
+ } else {
+ complete(&mcbsp_tx->tx_irq_completion);
+ }
return IRQ_HANDLED;
}
@@ -103,11 +112,20 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
{
struct omap_mcbsp *mcbsp_rx = dev_id;
+ u16 irqst_spcr1;
- dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n",
- OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+ irqst_spcr1 = OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR1);
+ dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1);
- complete(&mcbsp_rx->rx_irq_completion);
+ if (irqst_spcr1 & RSYNC_ERR) {
+ dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n",
+ irqst_spcr1);
+ /* Writing zero to RSYNC_ERR clears the IRQ */
+ OMAP_MCBSP_WRITE(mcbsp_rx->io_base, SPCR1,
+ irqst_spcr1 & ~(RSYNC_ERR));
+ } else {
+ complete(&mcbsp_rx->tx_irq_completion);
+ }
return IRQ_HANDLED;
}
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 80b040f..8d329fb 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -54,6 +54,9 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
{
struct pin_config *reg;
+ if (cpu_is_omap44xx())
+ return 0;
+
if (mux_cfg == NULL) {
printk(KERN_ERR "Pin mux table not initialized\n");
return -ENODEV;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index fa5297d..a5b9bcd 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -6,6 +6,9 @@
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -38,12 +41,14 @@
#define OMAP1_SRAM_VA VMALLOC_END
#define OMAP2_SRAM_PA 0x40200000
#define OMAP2_SRAM_PUB_PA 0x4020f800
-#define OMAP2_SRAM_VA VMALLOC_END
-#define OMAP2_SRAM_PUB_VA (VMALLOC_END + 0x800)
+#define OMAP2_SRAM_VA 0xe3000000
+#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
#define OMAP3_SRAM_PA 0x40200000
#define OMAP3_SRAM_VA 0xd7000000
#define OMAP3_SRAM_PUB_PA 0x40208000
#define OMAP3_SRAM_PUB_VA 0xd7008000
+#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/
+#define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define SRAM_BOOTLOADER_SZ 0x00
@@ -87,6 +92,10 @@ static int is_sram_locked(void)
{
int type = 0;
+ if (cpu_is_omap44xx())
+ /* Not yet supported */
+ return 0;
+
if (cpu_is_omap242x())
type = omap_rev() & OMAP2_DEVICETYPE_MASK;
@@ -135,6 +144,10 @@ void __init omap_detect_sram(void)
omap_sram_base = OMAP3_SRAM_VA;
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
+ } else if (cpu_is_omap44xx()) {
+ omap_sram_base = OMAP4_SRAM_VA;
+ omap_sram_start = OMAP4_SRAM_PA;
+ omap_sram_size = 0x8000; /* 32K */
} else {
omap_sram_base = OMAP2_SRAM_VA;
omap_sram_start = OMAP2_SRAM_PA;
@@ -201,8 +214,23 @@ void __init omap_map_sram(void)
base = OMAP3_SRAM_PA;
base = ROUND_DOWN(base, PAGE_SIZE);
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+
+ /*
+ * SRAM must be marked as non-cached on OMAP3 since the
+ * CORE DPLL M2 divider change code (in SRAM) runs with the
+ * SDRAM controller disabled, and if it is marked cached,
+ * the ARM may attempt to write cache lines back to SDRAM
+ * which will cause the system to hang.
+ */
+ omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
}
+ if (cpu_is_omap44xx()) {
+ omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
+ base = OMAP4_SRAM_PA;
+ base = ROUND_DOWN(base, PAGE_SIZE);
+ omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+ }
omap_sram_io_desc[0].length = 1024 * 1024; /* Use section desc */
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
@@ -242,20 +270,13 @@ void * omap_sram_push(void * start, unsigned long size)
return (void *)omap_sram_ceil;
}
-static void omap_sram_error(void)
-{
- panic("Uninitialized SRAM function\n");
-}
-
#ifdef CONFIG_ARCH_OMAP1
static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
{
- if (!_omap_sram_reprogram_clock)
- omap_sram_error();
-
+ BUG_ON(!_omap_sram_reprogram_clock);
_omap_sram_reprogram_clock(dpllctl, ckctl);
}
@@ -280,9 +301,7 @@ static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock)
{
- if (!_omap2_sram_ddr_init)
- omap_sram_error();
-
+ BUG_ON(!_omap2_sram_ddr_init);
_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
base_cs, force_unlock);
}
@@ -292,9 +311,7 @@ static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
{
- if (!_omap2_sram_reprogram_sdrc)
- omap_sram_error();
-
+ BUG_ON(!_omap2_sram_reprogram_sdrc);
_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
}
@@ -302,9 +319,7 @@ static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
{
- if (!_omap2_set_prcm)
- omap_sram_error();
-
+ BUG_ON(!_omap2_set_prcm);
return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
}
#endif
@@ -356,16 +371,15 @@ static inline int omap243x_sram_init(void)
static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb,
- u32 m2);
+ u32 m2, u32 unlock_dll);
u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2)
+ u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll)
{
- if (!_omap3_sram_configure_core_dpll)
- omap_sram_error();
-
+ BUG_ON(!_omap3_sram_configure_core_dpll);
return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
sdrc_actim_ctrla,
- sdrc_actim_ctrlb, m2);
+ sdrc_actim_ctrlb, m2,
+ unlock_dll);
}
/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
@@ -406,6 +420,8 @@ int __init omap_sram_init(void)
omap243x_sram_init();
else if (cpu_is_omap34xx())
omap34xx_sram_init();
+ else if (cpu_is_omap44xx())
+ omap34xx_sram_init(); /* FIXME: */
return 0;
}
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 32eb9e3..e814803 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -15,10 +15,9 @@
#include <linux/spinlock.h>
#include <linux/bitops.h>
#include <linux/io.h>
-#include <asm/gpio.h>
+#include <linux/gpio.h>
static DEFINE_SPINLOCK(gpio_lock);
-static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */
static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)];
static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)];
@@ -46,82 +45,54 @@ static void __set_level(unsigned pin, int high)
writel(u, GPIO_OUT(pin));
}
-
-/*
- * GENERIC_GPIO primitives.
- */
-int gpio_direction_input(unsigned pin)
+static inline void __set_blinking(unsigned pin, int blink)
{
- unsigned long flags;
-
- if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_input)) {
- pr_debug("%s: invalid GPIO %d\n", __func__, pin);
- return -EINVAL;
- }
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- /*
- * Some callers might not have used gpio_request(),
- * so flag this pin as requested now.
- */
- if (gpio_label[pin] == NULL)
- gpio_label[pin] = "?";
+ u32 u;
- /*
- * Configure GPIO direction.
- */
- __set_direction(pin, 1);
+ u = readl(GPIO_BLINK_EN(pin));
+ if (blink)
+ u |= 1 << (pin & 31);
+ else
+ u &= ~(1 << (pin & 31));
+ writel(u, GPIO_BLINK_EN(pin));
+}
- spin_unlock_irqrestore(&gpio_lock, flags);
+static inline int orion_gpio_is_valid(unsigned pin, int mode)
+{
+ if (pin < GPIO_MAX) {
+ if ((mode & GPIO_INPUT_OK) && !test_bit(pin, gpio_valid_input))
+ goto err_out;
+ if ((mode & GPIO_OUTPUT_OK) && !test_bit(pin, gpio_valid_output))
+ goto err_out;
+ return true;
+ }
- return 0;
+err_out:
+ pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+ return false;
}
-EXPORT_SYMBOL(gpio_direction_input);
-int gpio_direction_output(unsigned pin, int value)
+/*
+ * GENERIC_GPIO primitives.
+ */
+static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
{
unsigned long flags;
- u32 u;
- if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_output)) {
- pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+ if (!orion_gpio_is_valid(pin, GPIO_INPUT_OK))
return -EINVAL;
- }
spin_lock_irqsave(&gpio_lock, flags);
- /*
- * Some callers might not have used gpio_request(),
- * so flag this pin as requested now.
- */
- if (gpio_label[pin] == NULL)
- gpio_label[pin] = "?";
-
- /*
- * Disable blinking.
- */
- u = readl(GPIO_BLINK_EN(pin));
- u &= ~(1 << (pin & 31));
- writel(u, GPIO_BLINK_EN(pin));
-
- /*
- * Configure GPIO output value.
- */
- __set_level(pin, value);
-
- /*
- * Configure GPIO direction.
- */
- __set_direction(pin, 0);
+ /* Configure GPIO direction. */
+ __set_direction(pin, 1);
spin_unlock_irqrestore(&gpio_lock, flags);
return 0;
}
-EXPORT_SYMBOL(gpio_direction_output);
-int gpio_get_value(unsigned pin)
+static int orion_gpio_get_value(struct gpio_chip *chip, unsigned pin)
{
int val;
@@ -132,83 +103,75 @@ int gpio_get_value(unsigned pin)
return (val >> (pin & 31)) & 1;
}
-EXPORT_SYMBOL(gpio_get_value);
-void gpio_set_value(unsigned pin, int value)
+static int orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin,
+ int value)
{
unsigned long flags;
- u32 u;
+
+ if (!orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
+ return -EINVAL;
spin_lock_irqsave(&gpio_lock, flags);
- /*
- * Disable blinking.
- */
- u = readl(GPIO_BLINK_EN(pin));
- u &= ~(1 << (pin & 31));
- writel(u, GPIO_BLINK_EN(pin));
+ /* Disable blinking. */
+ __set_blinking(pin, 0);
- /*
- * Configure GPIO output value.
- */
+ /* Configure GPIO output value. */
__set_level(pin, value);
+ /* Configure GPIO direction. */
+ __set_direction(pin, 0);
+
spin_unlock_irqrestore(&gpio_lock, flags);
+
+ return 0;
}
-EXPORT_SYMBOL(gpio_set_value);
-int gpio_request(unsigned pin, const char *label)
+static void orion_gpio_set_value(struct gpio_chip *chip, unsigned pin,
+ int value)
{
unsigned long flags;
- int ret;
-
- if (pin >= GPIO_MAX ||
- !(test_bit(pin, gpio_valid_input) ||
- test_bit(pin, gpio_valid_output))) {
- pr_debug("%s: invalid GPIO %d\n", __func__, pin);
- return -EINVAL;
- }
spin_lock_irqsave(&gpio_lock, flags);
- if (gpio_label[pin] == NULL) {
- gpio_label[pin] = label ? label : "?";
- ret = 0;
- } else {
- pr_debug("%s: GPIO %d already used as %s\n",
- __func__, pin, gpio_label[pin]);
- ret = -EBUSY;
- }
- spin_unlock_irqrestore(&gpio_lock, flags);
- return ret;
+ /* Configure GPIO output value. */
+ __set_level(pin, value);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
}
-EXPORT_SYMBOL(gpio_request);
-void gpio_free(unsigned pin)
+static int orion_gpio_request(struct gpio_chip *chip, unsigned pin)
{
- if (pin >= GPIO_MAX ||
- !(test_bit(pin, gpio_valid_input) ||
- test_bit(pin, gpio_valid_output))) {
- pr_debug("%s: invalid GPIO %d\n", __func__, pin);
- return;
- }
-
- if (gpio_label[pin] == NULL)
- pr_warning("%s: GPIO %d already freed\n", __func__, pin);
- else
- gpio_label[pin] = NULL;
+ if (orion_gpio_is_valid(pin, GPIO_INPUT_OK) ||
+ orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
+ return 0;
+ return -EINVAL;
}
-EXPORT_SYMBOL(gpio_free);
+static struct gpio_chip orion_gpiochip = {
+ .label = "orion_gpio",
+ .direction_input = orion_gpio_direction_input,
+ .get = orion_gpio_get_value,
+ .direction_output = orion_gpio_direction_output,
+ .set = orion_gpio_set_value,
+ .request = orion_gpio_request,
+ .base = 0,
+ .ngpio = GPIO_MAX,
+ .can_sleep = 0,
+};
+
+void __init orion_gpio_init(void)
+{
+ gpiochip_add(&orion_gpiochip);
+}
/*
* Orion-specific GPIO API extensions.
*/
void __init orion_gpio_set_unused(unsigned pin)
{
- /*
- * Configure as output, drive low.
- */
+ /* Configure as output, drive low. */
__set_level(pin, 0);
__set_direction(pin, 0);
}
@@ -230,21 +193,14 @@ void __init orion_gpio_set_valid(unsigned pin, int mode)
void orion_gpio_set_blink(unsigned pin, int blink)
{
unsigned long flags;
- u32 u;
spin_lock_irqsave(&gpio_lock, flags);
- /*
- * Set output value to zero.
- */
+ /* Set output value to zero. */
__set_level(pin, 0);
- u = readl(GPIO_BLINK_EN(pin));
- if (blink)
- u |= 1 << (pin & 31);
- else
- u &= ~(1 << (pin & 31));
- writel(u, GPIO_BLINK_EN(pin));
+ /* Set blinking. */
+ __set_blinking(pin, blink);
spin_unlock_irqrestore(&gpio_lock, flags);
}
@@ -368,7 +324,7 @@ static int gpio_irq_set_type(u32 irq, u32 type)
}
struct irq_chip orion_gpio_irq_chip = {
- .name = "orion_gpio",
+ .name = "orion_gpio_irq",
.ack = gpio_irq_ack,
.mask = gpio_irq_mask,
.unmask = gpio_irq_unmask,
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index 33f6c6a..9646a94 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -14,12 +14,9 @@
/*
* GENERIC_GPIO primitives.
*/
-int gpio_request(unsigned pin, const char *label);
-void gpio_free(unsigned pin);
-int gpio_direction_input(unsigned pin);
-int gpio_direction_output(unsigned pin, int value);
-int gpio_get_value(unsigned pin);
-void gpio_set_value(unsigned pin, int value);
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
/*
* Orion-specific GPIO API extensions.
@@ -27,11 +24,13 @@ void gpio_set_value(unsigned pin, int value);
void orion_gpio_set_unused(unsigned pin);
void orion_gpio_set_blink(unsigned pin, int blink);
-#define GPIO_BIDI_OK (1 << 0)
-#define GPIO_INPUT_OK (1 << 1)
-#define GPIO_OUTPUT_OK (1 << 2)
+#define GPIO_INPUT_OK (1 << 0)
+#define GPIO_OUTPUT_OK (1 << 1)
void orion_gpio_set_valid(unsigned pin, int mode);
+/* Initialize gpiolib. */
+void __init orion_gpio_init(void);
+
/*
* GPIO interrupt handling.
*/
diff --git a/arch/arm/plat-orion/include/plat/orion5x_wdt.h b/arch/arm/plat-orion/include/plat/orion_wdt.h
index 3c9cf6a3..665c362 100644
--- a/arch/arm/plat-orion/include/plat/orion5x_wdt.h
+++ b/arch/arm/plat-orion/include/plat/orion_wdt.h
@@ -1,15 +1,15 @@
/*
- * arch/arm/plat-orion/include/plat/orion5x_wdt.h
+ * arch/arm/plat-orion/include/plat/orion_wdt.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#ifndef __PLAT_ORION5X_WDT_H
-#define __PLAT_ORION5X_WDT_H
+#ifndef __PLAT_ORION_WDT_H
+#define __PLAT_ORION_WDT_H
-struct orion5x_wdt_platform_data {
+struct orion_wdt_platform_data {
u32 tclk; /* no <linux/clk.h> support yet */
};
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index de8a001..715a301 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -12,11 +12,15 @@
*/
#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
+#include <linux/timer.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/mach/time.h>
#include <mach/bridge-regs.h>
+#include <mach/hardware.h>
/*
* Number of timer ticks per jiffy.
@@ -39,6 +43,56 @@ static u32 ticks_per_jiffy;
/*
+ * Orion's sched_clock implementation. It has a resolution of
+ * at least 7.5ns (133MHz TCLK) and a maximum value of 834 days.
+ *
+ * Because the hardware timer period is quite short (21 secs if
+ * 200MHz TCLK) and because cnt32_to_63() needs to be called at
+ * least once per half period to work properly, a kernel timer is
+ * set up to ensure this requirement is always met.
+ */
+#define TCLK2NS_SCALE_FACTOR 8
+
+static unsigned long tclk2ns_scale;
+
+unsigned long long sched_clock(void)
+{
+ unsigned long long v = cnt32_to_63(0xffffffff - readl(TIMER0_VAL));
+ return (v * tclk2ns_scale) >> TCLK2NS_SCALE_FACTOR;
+}
+
+static struct timer_list cnt32_to_63_keepwarm_timer;
+
+static void cnt32_to_63_keepwarm(unsigned long data)
+{
+ mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+ (void) sched_clock();
+}
+
+static void __init setup_sched_clock(unsigned long tclk)
+{
+ unsigned long long v;
+ unsigned long data;
+
+ v = NSEC_PER_SEC;
+ v <<= TCLK2NS_SCALE_FACTOR;
+ v += tclk/2;
+ do_div(v, tclk);
+ /*
+ * We want an even value to automatically clear the top bit
+ * returned by cnt32_to_63() without an additional run time
+ * instruction. So if the LSB is 1 then round it up.
+ */
+ if (v & 1)
+ v++;
+ tclk2ns_scale = v;
+
+ data = (0xffffffffUL / tclk / 2 - 2) * HZ;
+ setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, data);
+ mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+}
+
+/*
* Clocksource handling.
*/
static cycle_t orion_clksrc_read(struct clocksource *cs)
@@ -176,6 +230,10 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk)
ticks_per_jiffy = (tclk + HZ/2) / HZ;
+ /*
+ * Set scale and timer for sched_clock
+ */
+ setup_sched_clock(tclk);
/*
* Setup free-running clocksource timer (interrupts
@@ -190,7 +248,6 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk)
orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift);
clocksource_register(&orion_clksrc);
-
/*
* Setup clockevent timer (interrupt-driven.)
*/
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 8f2c4c7..0264bfb 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -7,3 +7,5 @@ obj-y := dma.o
obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_PXA3xx) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
+
+obj-$(CONFIG_HAVE_PWM) += pwm.o
diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/plat-pxa/include/plat/i2c.h
index 1a9f65e..1a9f65e 100644
--- a/arch/arm/mach-pxa/include/mach/i2c.h
+++ b/arch/arm/plat-pxa/include/plat/i2c.h
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
index fcdd374..a9eabdc 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/plat-pxa/pwm.c
@@ -21,6 +21,19 @@
#include <asm/div64.h>
+#define HAS_SECONDARY_PWM 0x10
+#define PWM_ID_BASE(d) ((d) & 0xf)
+
+static const struct platform_device_id pwm_id_table[] = {
+ /* PWM has_secondary_pwm? */
+ { "pxa25x-pwm", 0 },
+ { "pxa27x-pwm", 0 | HAS_SECONDARY_PWM },
+ { "pxa168-pwm", 1 },
+ { "pxa910-pwm", 1 },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, pwm_id_table);
+
/* PWM registers and bits definitions */
#define PWMCR (0x00)
#define PWMDCR (0x04)
@@ -31,7 +44,8 @@
struct pwm_device {
struct list_head node;
- struct platform_device *pdev;
+ struct pwm_device *secondary;
+ struct platform_device *pdev;
const char *label;
struct clk *clk;
@@ -159,17 +173,17 @@ static inline void __add_pwm(struct pwm_device *pwm)
mutex_unlock(&pwm_lock);
}
-static struct pwm_device *pwm_probe(struct platform_device *pdev,
- unsigned int pwm_id, struct pwm_device *parent_pwm)
+static int __devinit pwm_probe(struct platform_device *pdev)
{
- struct pwm_device *pwm;
+ struct platform_device_id *id = platform_get_device_id(pdev);
+ struct pwm_device *pwm, *secondary = NULL;
struct resource *r;
int ret = 0;
pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
if (pwm == NULL) {
dev_err(&pdev->dev, "failed to allocate memory\n");
- return ERR_PTR(-ENOMEM);
+ return -ENOMEM;
}
pwm->clk = clk_get(&pdev->dev, NULL);
@@ -180,16 +194,9 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev,
pwm->clk_enabled = 0;
pwm->use_count = 0;
- pwm->pwm_id = pwm_id;
+ pwm->pwm_id = PWM_ID_BASE(id->driver_data) + pdev->id;
pwm->pdev = pdev;
- if (parent_pwm != NULL) {
- /* registers for the second PWM has offset of 0x10 */
- pwm->mmio_base = parent_pwm->mmio_base + 0x10;
- __add_pwm(pwm);
- return pwm;
- }
-
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (r == NULL) {
dev_err(&pdev->dev, "no memory resource defined\n");
@@ -211,9 +218,27 @@ static struct pwm_device *pwm_probe(struct platform_device *pdev,
goto err_free_mem;
}
+ if (id->driver_data & HAS_SECONDARY_PWM) {
+ secondary = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+ if (secondary == NULL) {
+ ret = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ *secondary = *pwm;
+ pwm->secondary = secondary;
+
+ /* registers for the second PWM has offset of 0x10 */
+ secondary->mmio_base = pwm->mmio_base + 0x10;
+ secondary->pwm_id = pdev->id + 2;
+ }
+
__add_pwm(pwm);
+ if (secondary)
+ __add_pwm(secondary);
+
platform_set_drvdata(pdev, pwm);
- return pwm;
+ return 0;
err_free_mem:
release_mem_region(r->start, r->end - r->start + 1);
@@ -221,32 +246,7 @@ err_free_clk:
clk_put(pwm->clk);
err_free:
kfree(pwm);
- return ERR_PTR(ret);
-}
-
-static int __devinit pxa25x_pwm_probe(struct platform_device *pdev)
-{
- struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL);
-
- if (IS_ERR(pwm))
- return PTR_ERR(pwm);
-
- return 0;
-}
-
-static int __devinit pxa27x_pwm_probe(struct platform_device *pdev)
-{
- struct pwm_device *pwm;
-
- pwm = pwm_probe(pdev, pdev->id, NULL);
- if (IS_ERR(pwm))
- return PTR_ERR(pwm);
-
- pwm = pwm_probe(pdev, pdev->id + 2, pwm);
- if (IS_ERR(pwm))
- return PTR_ERR(pwm);
-
- return 0;
+ return ret;
}
static int __devexit pwm_remove(struct platform_device *pdev)
@@ -259,6 +259,12 @@ static int __devexit pwm_remove(struct platform_device *pdev)
return -ENODEV;
mutex_lock(&pwm_lock);
+
+ if (pwm->secondary) {
+ list_del(&pwm->secondary->node);
+ kfree(pwm->secondary);
+ }
+
list_del(&pwm->node);
mutex_unlock(&pwm_lock);
@@ -272,46 +278,25 @@ static int __devexit pwm_remove(struct platform_device *pdev)
return 0;
}
-static struct platform_driver pxa25x_pwm_driver = {
+static struct platform_driver pwm_driver = {
.driver = {
.name = "pxa25x-pwm",
+ .owner = THIS_MODULE,
},
- .probe = pxa25x_pwm_probe,
- .remove = __devexit_p(pwm_remove),
-};
-
-static struct platform_driver pxa27x_pwm_driver = {
- .driver = {
- .name = "pxa27x-pwm",
- },
- .probe = pxa27x_pwm_probe,
+ .probe = pwm_probe,
.remove = __devexit_p(pwm_remove),
+ .id_table = pwm_id_table,
};
static int __init pwm_init(void)
{
- int ret = 0;
-
- ret = platform_driver_register(&pxa25x_pwm_driver);
- if (ret) {
- printk(KERN_ERR "failed to register pxa25x_pwm_driver\n");
- return ret;
- }
-
- ret = platform_driver_register(&pxa27x_pwm_driver);
- if (ret) {
- printk(KERN_ERR "failed to register pxa27x_pwm_driver\n");
- return ret;
- }
-
- return ret;
+ return platform_driver_register(&pwm_driver);
}
arch_initcall(pwm_init);
static void __exit pwm_exit(void)
{
- platform_driver_unregister(&pxa25x_pwm_driver);
- platform_driver_unregister(&pxa27x_pwm_driver);
+ platform_driver_unregister(&pwm_driver);
}
module_exit(pwm_exit);
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index de93838..935c755 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -71,6 +71,15 @@ config S3C2410_PM_DEBUG
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
for more information.
+config S3C_PM_DEBUG_LED_SMDK
+ bool "SMDK LED suspend/resume debugging"
+ depends on PM && (MACH_SMDK6410)
+ help
+ Say Y here to enable the use of the SMDK LEDs on the baseboard
+ for debugging of the state of the suspend and resume process.
+
+ Note, this currently only works for S3C64XX based SMDK boards.
+
config S3C2410_PM_CHECK
bool "S3C2410 PM Suspend Memory CRC"
depends on PM && CRC32
@@ -150,6 +159,13 @@ config S3C_GPIO_CFG_S3C64XX
Internal configuration to enable S3C64XX style GPIO configuration
functions.
+# DMA
+
+config S3C_DMA
+ bool
+ help
+ Internal configuration for S3C DMA core
+
# device definitions to compile in
config S3C_DEV_HSMMC
@@ -172,4 +188,14 @@ config S3C_DEV_FB
help
Compile in platform device definition for framebuffer
+config S3C_DEV_USB_HOST
+ bool
+ help
+ Compile in platform device definition for USB host.
+
+config S3C_DEV_USB_HSOTG
+ bool
+ help
+ Compile in platform device definition for USB high-speed OtG
+
endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 8d7815d..6106514 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -18,9 +18,14 @@ obj-y += pwm-clock.o
obj-y += gpio.o
obj-y += gpio-config.o
+# DMA support
+
+obj-$(CONFIG_S3C_DMA) += dma.o
+
# PM support
obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM) += pm-gpio.o
obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o
# devices
@@ -30,3 +35,5 @@ obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
+obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
+obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/dev-usb-hsotg.c b/arch/arm/plat-s3c/dev-usb-hsotg.c
new file mode 100644
index 0000000..e2f604b
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-usb-hsotg.c
@@ -0,0 +1,41 @@
+/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB high-speed UDC/OtG block
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_usb_hsotg_resources[] = {
+ [0] = {
+ .start = S3C_PA_USB_HSOTG,
+ .end = S3C_PA_USB_HSOTG + 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_OTG,
+ .end = IRQ_OTG,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_usb_hsotg = {
+ .name = "s3c-hsotg",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources),
+ .resource = s3c_usb_hsotg_resources,
+};
diff --git a/arch/arm/plat-s3c/dev-usb.c b/arch/arm/plat-s3c/dev-usb.c
new file mode 100644
index 0000000..2ee85ab
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-usb.c
@@ -0,0 +1,50 @@
+/* linux/arch/arm/plat-s3c/dev-usb.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB host
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+
+static struct resource s3c_usb_resource[] = {
+ [0] = {
+ .start = S3C_PA_USBHOST,
+ .end = S3C_PA_USBHOST + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH,
+ .end = IRQ_USBH,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 s3c_device_usb_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_usb = {
+ .name = "s3c2410-ohci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_usb_resource),
+ .resource = s3c_usb_resource,
+ .dev = {
+ .dma_mask = &s3c_device_usb_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+EXPORT_SYMBOL(s3c_device_usb);
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-s3c/dma.c
new file mode 100644
index 0000000..c9db75c
--- /dev/null
+++ b/arch/arm/plat-s3c/dma.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/plat-s3c/dma.c
+ *
+ * Copyright (c) 2003-2005,2006,2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c2410_dma_buf;
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+#include <plat/dma-plat.h>
+
+/* dma channel state information */
+struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
+struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
+
+/* s3c_dma_lookup_channel
+ *
+ * change the dma channel number given into a real dma channel id
+*/
+
+struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
+{
+ if (channel & DMACH_LOW_LEVEL)
+ return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+ else
+ return s3c_dma_chan_map[channel];
+}
+
+/* do we need to protect the settings of the fields from
+ * irq?
+*/
+
+int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
+
+ chan->op_fn = rtn;
+
+ return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_opfn);
+
+int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
+
+ chan->callback_fn = rtn;
+
+ return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ chan->flags = flags;
+ return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_setflags);
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c
index d71dd6d..260fdc6 100644
--- a/arch/arm/plat-s3c/gpio.c
+++ b/arch/arm/plat-s3c/gpio.c
@@ -16,7 +16,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <plat/gpio-core.h>
+#include <mach/gpio-core.h>
#ifdef CONFIG_S3C_GPIO_TRACK
struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
@@ -140,6 +140,15 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
if (!gc->get)
gc->get = s3c_gpiolib_get;
+#ifdef CONFIG_PM
+ if (chip->pm != NULL) {
+ if (!chip->pm->save || !chip->pm->resume)
+ printk(KERN_ERR "gpio: %s has missing PM functions\n",
+ gc->label);
+ } else
+ printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
+#endif
+
/* gpiochip_add() prints own failure message on error. */
ret = gpiochip_add(gc);
if (ret >= 0)
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index 43df2a4..d847bd4 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -19,10 +19,12 @@ struct s3c_adc_client;
extern int s3c_adc_start(struct s3c_adc_client *client,
unsigned int channel, unsigned int nr_samples);
-extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
- void (*select)(unsigned selected),
- void (*conv)(unsigned d0, unsigned d1),
- unsigned int is_ts);
+extern struct s3c_adc_client *
+ s3c_adc_register(struct platform_device *pdev,
+ void (*select)(unsigned selected),
+ void (*conv)(unsigned d0, unsigned d1,
+ unsigned *samples_left),
+ unsigned int is_ts);
extern void s3c_adc_release(struct s3c_adc_client *client);
diff --git a/arch/arm/plat-s3c/include/plat/clock.h b/arch/arm/plat-s3c/include/plat/clock.h
index a10622e..d86af84 100644
--- a/arch/arm/plat-s3c/include/plat/clock.h
+++ b/arch/arm/plat-s3c/include/plat/clock.h
@@ -50,6 +50,7 @@ extern struct clk clk_xtal;
extern struct clk clk_ext;
/* S3C64XX specific clocks */
+extern struct clk clk_h2;
extern struct clk clk_27m;
extern struct clk clk_48m;
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index e62ae0f..be541cb 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -69,3 +69,6 @@ extern struct sysdev_class s3c2412_sysclass;
extern struct sysdev_class s3c2440_sysclass;
extern struct sysdev_class s3c2442_sysclass;
extern struct sysdev_class s3c2443_sysclass;
+extern struct sysdev_class s3c6410_sysclass;
+extern struct sysdev_class s3c64xx_sysclass;
+
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 26f0cec..a0b6768 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -45,6 +45,7 @@ extern struct platform_device s3c_device_spi1;
extern struct platform_device s3c_device_nand;
extern struct platform_device s3c_device_usbgadget;
+extern struct platform_device s3c_device_usb_hsotg;
/* s3c2440 specific devices */
diff --git a/arch/arm/plat-s3c/include/plat/dma-core.h b/arch/arm/plat-s3c/include/plat/dma-core.h
new file mode 100644
index 0000000..32ff2a9
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/dma-core.h
@@ -0,0 +1,22 @@
+/* arch/arm/plat-s3c/include/plat/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Samsung S3C DMA core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
+
+extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
+
+/* the currently allocated channel information */
+extern struct s3c2410_dma_chan s3c2410_chans[];
+
+
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-s3c/include/plat/dma.h
new file mode 100644
index 0000000..34dba98
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/dma.h
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c/include/plat/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c2410_dma_buffresult {
+ S3C2410_RES_OK,
+ S3C2410_RES_ERR,
+ S3C2410_RES_ABORT
+};
+
+enum s3c2410_dmasrc {
+ S3C2410_DMASRC_HW, /* source is memory */
+ S3C2410_DMASRC_MEM /* source is hardware */
+};
+
+/* enum s3c2410_chan_op
+ *
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+*/
+
+enum s3c2410_chan_op {
+ S3C2410_DMAOP_START,
+ S3C2410_DMAOP_STOP,
+ S3C2410_DMAOP_PAUSE,
+ S3C2410_DMAOP_RESUME,
+ S3C2410_DMAOP_FLUSH,
+ S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */
+ S3C2410_DMAOP_STARTED, /* indicate channel started */
+};
+
+struct s3c2410_dma_client {
+ char *name;
+};
+
+struct s3c2410_dma_chan;
+
+/* s3c2410_dma_cbfn_t
+ *
+ * buffer callback routine type
+*/
+
+typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+ void *buf, int size,
+ enum s3c2410_dma_buffresult result);
+
+typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+ enum s3c2410_chan_op );
+
+
+
+/* s3c2410_dma_request
+ *
+ * request a dma channel exclusivley
+*/
+
+extern int s3c2410_dma_request(unsigned int channel,
+ struct s3c2410_dma_client *, void *dev);
+
+
+/* s3c2410_dma_ctrl
+ *
+ * change the state of the dma channel
+*/
+
+extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
+
+/* s3c2410_dma_setflags
+ *
+ * set the channel's flags to a given state
+*/
+
+extern int s3c2410_dma_setflags(unsigned int channel,
+ unsigned int flags);
+
+/* s3c2410_dma_free
+ *
+ * free the dma channel (will also abort any outstanding operations)
+*/
+
+extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
+
+/* s3c2410_dma_enqueue
+ *
+ * place the given buffer onto the queue of operations for the channel.
+ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+ * drained before the buffer is given to the DMA system.
+*/
+
+extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
+ dma_addr_t data, int size);
+
+/* s3c2410_dma_config
+ *
+ * configure the dma channel
+*/
+
+extern int s3c2410_dma_config(unsigned int channel, int xferunit);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the device we're talking to
+*/
+
+extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
+ unsigned long devaddr);
+
+/* s3c2410_dma_getposition
+ *
+ * get the position that the dma transfer is currently at
+*/
+
+extern int s3c2410_dma_getposition(unsigned int channel,
+ dma_addr_t *src, dma_addr_t *dest);
+
+extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
+
+
diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h
index 2fc60a5..32af612 100644
--- a/arch/arm/plat-s3c/include/plat/gpio-core.h
+++ b/arch/arm/plat-s3c/include/plat/gpio-core.h
@@ -20,6 +20,18 @@
* specific code.
*/
+struct s3c_gpio_chip;
+
+/**
+ * struct s3c_gpio_pm - power management (suspend/resume) information
+ * @save: Routine to save the state of the GPIO block
+ * @resume: Routine to resume the GPIO block.
+ */
+struct s3c_gpio_pm {
+ void (*save)(struct s3c_gpio_chip *chip);
+ void (*resume)(struct s3c_gpio_chip *chip);
+};
+
struct s3c_gpio_cfg;
/**
@@ -27,6 +39,7 @@ struct s3c_gpio_cfg;
* @chip: The chip structure to be exported via gpiolib.
* @base: The base pointer to the gpio configuration registers.
* @config: special function and pull-resistor control information.
+ * @pm_save: Save information for suspend/resume support.
*
* This wrapper provides the necessary information for the Samsung
* specific gpios being registered with gpiolib.
@@ -34,7 +47,11 @@ struct s3c_gpio_cfg;
struct s3c_gpio_chip {
struct gpio_chip chip;
struct s3c_gpio_cfg *config;
+ struct s3c_gpio_pm *pm;
void __iomem *base;
+#ifdef CONFIG_PM
+ u32 pm_save[4];
+#endif
};
static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
@@ -75,3 +92,16 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
#endif
+
+#ifdef CONFIG_PM
+extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
+extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
+extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
+#define __gpio_pm(x) x
+#else
+#define s3c_gpio_pm_1bit NULL
+#define s3c_gpio_pm_2bit NULL
+#define s3c_gpio_pm_4bit NULL
+#define __gpio_pm(x) NULL
+
+#endif /* CONFIG_PM */
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
index 3779775..7a79719 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-s3c/include/plat/pm.h
@@ -44,6 +44,8 @@ extern void (*pm_cpu_sleep)(void);
extern unsigned long s3c_pm_flags;
+extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */
+
/* from sleep.S */
extern int s3c_cpu_save(unsigned long *saveblk);
@@ -88,6 +90,7 @@ struct pm_uart_save {
u32 ufcon;
u32 umcon;
u32 ubrdiv;
+ u32 udivslot;
};
/* helper functions to save/restore lists of registers. */
@@ -124,6 +127,18 @@ extern void s3c_pm_dbg(const char *msg, ...);
#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
#endif
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+/**
+ * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
+ * @set: set bits for the state of the LEDs
+ * @clear: clear bits for the state of the LEDs.
+ */
+extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
+
+#else
+static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
+#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
+
/* suspend memory checking */
#ifdef CONFIG_S3C2410_PM_CHECK
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
index 487d7d2..66af75a 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -189,6 +189,11 @@
#define S3C2443_DIVSLOT (0x2C)
+/* S3C64XX interrupt registers. */
+#define S3C64XX_UINTP 0x30
+#define S3C64XX_UINTSP 0x34
+#define S3C64XX_UINTM 0x38
+
#ifndef __ASSEMBLY__
/* struct s3c24xx_uart_clksrc
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
index c4ca392..f615308 100644
--- a/arch/arm/plat-s3c/include/plat/sdhci.h
+++ b/arch/arm/plat-s3c/include/plat/sdhci.h
@@ -67,12 +67,52 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
/* Helper function availablity */
+extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+
+/* S3C6400 SDHCI setup */
+
+#ifdef CONFIG_S3C6400_SETUP_SDHCI
+extern char *s3c6400_hsmmc_clksrcs[4];
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card);
+
+static inline void s3c6400_default_sdhci0(void)
+{
+ s3c_hsmmc0_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+ s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
+ s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+
+#else
+static inline void s3c6400_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s3c6400_default_sdhci1(void)
+{
+ s3c_hsmmc1_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+ s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
+ s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6400_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#else
+static inline void s3c6400_default_sdhci0(void) { }
+static inline void s3c6400_default_sdhci1(void) { }
+#endif /* CONFIG_S3C6400_SETUP_SDHCI */
+
+/* S3C6410 SDHCI setup */
+
#ifdef CONFIG_S3C6410_SETUP_SDHCI
extern char *s3c6410_hsmmc_clksrcs[4];
-extern void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-
extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
void __iomem *r,
struct mmc_ios *ios,
@@ -82,7 +122,7 @@ extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
static inline void s3c6410_default_sdhci0(void)
{
s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
- s3c_hsmmc0_def_platdata.cfg_gpio = s3c6410_setup_sdhci0_cfg_gpio;
+ s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
}
#else
@@ -93,7 +133,7 @@ static inline void s3c6410_default_sdhci0(void) { }
static inline void s3c6410_default_sdhci1(void)
{
s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
- s3c_hsmmc1_def_platdata.cfg_gpio = s3c6410_setup_sdhci1_cfg_gpio;
+ s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
}
#else
diff --git a/arch/arm/plat-s3c/include/plat/udc-hs.h b/arch/arm/plat-s3c/include/plat/udc-hs.h
new file mode 100644
index 0000000..dd04db0
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/udc-hs.h
@@ -0,0 +1,29 @@
+/* arch/arm/plat-s3c/include/plat/udc-hs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG platform information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c_hostg_dmamode {
+ S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */
+ S3C_HSOTG_DMA_ONLY, /* always use DMA */
+ S3C_HSOTG_DMA_DRV, /* DMA is chosen by driver */
+};
+
+/**
+ * struct s3c_hsotg_plat - platform data for high-speed otg/udc
+ * @dma: Whether to use DMA or not.
+ * @is_osc: The clock source is an oscillator, not a crystal
+ */
+struct s3c_hsotg_plat {
+ enum s3c_hostg_dmamode dma;
+ unsigned int is_osc : 1;
+};
diff --git a/arch/arm/plat-s3c/include/plat/watchdog-reset.h b/arch/arm/plat-s3c/include/plat/watchdog-reset.h
new file mode 100644
index 0000000..54b762a
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/watchdog-reset.h
@@ -0,0 +1,49 @@
+/* arch/arm/plat-s3c/include/plat/watchdog-reset.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System define for arch_reset() function
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-watchdog.h>
+#include <mach/map.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+static inline void arch_wdt_reset(void)
+{
+ struct clk *wdtclk;
+
+ printk("arch_reset: attempting watchdog reset\n");
+
+ __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
+
+ wdtclk = clk_get(NULL, "watchdog");
+ if (!IS_ERR(wdtclk)) {
+ clk_enable(wdtclk);
+ } else
+ printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+
+ /* put initial values into count and data */
+ __raw_writel(0x80, S3C2410_WTCNT);
+ __raw_writel(0x80, S3C2410_WTDAT);
+
+ /* set the watchdog to go and reset... */
+ __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
+ S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
+
+ /* wait for reset to assert... */
+ mdelay(500);
+
+ printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+ /* delay to allow the serial port to show the message */
+ mdelay(50);
+}
diff --git a/arch/arm/plat-s3c/pm-gpio.c b/arch/arm/plat-s3c/pm-gpio.c
new file mode 100644
index 0000000..cfd326a
--- /dev/null
+++ b/arch/arm/plat-s3c/pm-gpio.c
@@ -0,0 +1,380 @@
+
+/* linux/arch/arm/plat-s3c/pm-gpio.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO PM code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/gpio-core.h>
+#include <plat/pm.h>
+
+/* PM GPIO helpers */
+
+#define OFFS_CON (0x00)
+#define OFFS_DAT (0x04)
+#define OFFS_UP (0x08)
+
+static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
+{
+ chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+ chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+}
+
+static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
+{
+ void __iomem *base = chip->base;
+ u32 old_gpcon = __raw_readl(base + OFFS_CON);
+ u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+ u32 gps_gpcon = chip->pm_save[0];
+ u32 gps_gpdat = chip->pm_save[1];
+ u32 gpcon;
+
+ /* GPACON only has one bit per control / data and no PULLUPs.
+ * GPACON[x] = 0 => Output, 1 => SFN */
+
+ /* first set all SFN bits to SFN */
+
+ gpcon = old_gpcon | gps_gpcon;
+ __raw_writel(gpcon, base + OFFS_CON);
+
+ /* now set all the other bits */
+
+ __raw_writel(gps_gpdat, base + OFFS_DAT);
+ __raw_writel(gps_gpcon, base + OFFS_CON);
+
+ S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+ chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_1bit = {
+ .save = s3c_gpio_pm_1bit_save,
+ .resume = s3c_gpio_pm_1bit_resume,
+};
+
+static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
+{
+ chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+ chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+ chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
+}
+
+/* Test whether the given masked+shifted bits of an GPIO configuration
+ * are one of the SFN (special function) modes. */
+
+static inline int is_sfn(unsigned long con)
+{
+ return con >= 2;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an input */
+
+static inline int is_in(unsigned long con)
+{
+ return con == 0;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an output */
+
+static inline int is_out(unsigned long con)
+{
+ return con == 1;
+}
+
+/**
+ * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
+ * @chip: The chip information to resume.
+ *
+ * Restore one of the GPIO banks that was saved during suspend. This is
+ * not as simple as once thought, due to the possibility of glitches
+ * from the order that the CON and DAT registers are set in.
+ *
+ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+ * combinations of changes to check. Three of these, if the pin stays
+ * in the same configuration can be discounted. This leaves us with
+ * the following:
+ *
+ * { IN => OUT } Change DAT first
+ * { IN => SFN } Change CON first
+ * { OUT => SFN } Change CON first, so new data will not glitch
+ * { OUT => IN } Change CON first, so new data will not glitch
+ * { SFN => IN } Change CON first
+ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+ *
+ * We do not currently deal with the UP registers as these control
+ * weak resistors, so a small delay in change should not need to bring
+ * these into the calculations.
+ *
+ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+ * state for when it is next output.
+ */
+static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
+{
+ void __iomem *base = chip->base;
+ u32 old_gpcon = __raw_readl(base + OFFS_CON);
+ u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+ u32 gps_gpcon = chip->pm_save[0];
+ u32 gps_gpdat = chip->pm_save[1];
+ u32 gpcon, old, new, mask;
+ u32 change_mask = 0x0;
+ int nr;
+
+ /* restore GPIO pull-up settings */
+ __raw_writel(chip->pm_save[2], base + OFFS_UP);
+
+ /* Create a change_mask of all the items that need to have
+ * their CON value changed before their DAT value, so that
+ * we minimise the work between the two settings.
+ */
+
+ for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+ old = (old_gpcon & mask) >> nr;
+ new = (gps_gpcon & mask) >> nr;
+
+ /* If there is no change, then skip */
+
+ if (old == new)
+ continue;
+
+ /* If both are special function, then skip */
+
+ if (is_sfn(old) && is_sfn(new))
+ continue;
+
+ /* Change is IN => OUT, do not change now */
+
+ if (is_in(old) && is_out(new))
+ continue;
+
+ /* Change is SFN => OUT, do not change now */
+
+ if (is_sfn(old) && is_out(new))
+ continue;
+
+ /* We should now be at the case of IN=>SFN,
+ * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+ change_mask |= mask;
+ }
+
+
+ /* Write the new CON settings */
+
+ gpcon = old_gpcon & ~change_mask;
+ gpcon |= gps_gpcon & change_mask;
+
+ __raw_writel(gpcon, base + OFFS_CON);
+
+ /* Now change any items that require DAT,CON */
+
+ __raw_writel(gps_gpdat, base + OFFS_DAT);
+ __raw_writel(gps_gpcon, base + OFFS_CON);
+
+ S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+ chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_2bit = {
+ .save = s3c_gpio_pm_2bit_save,
+ .resume = s3c_gpio_pm_2bit_resume,
+};
+
+#ifdef CONFIG_ARCH_S3C64XX
+static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
+{
+ chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
+ chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
+ chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
+
+ if (chip->chip.ngpio > 8)
+ chip->pm_save[0] = __raw_readl(chip->base - 4);
+}
+
+static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
+{
+ u32 old, new, mask;
+ u32 change_mask = 0x0;
+ int nr;
+
+ for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
+ old = (old_gpcon & mask) >> nr;
+ new = (gps_gpcon & mask) >> nr;
+
+ /* If there is no change, then skip */
+
+ if (old == new)
+ continue;
+
+ /* If both are special function, then skip */
+
+ if (is_sfn(old) && is_sfn(new))
+ continue;
+
+ /* Change is IN => OUT, do not change now */
+
+ if (is_in(old) && is_out(new))
+ continue;
+
+ /* Change is SFN => OUT, do not change now */
+
+ if (is_sfn(old) && is_out(new))
+ continue;
+
+ /* We should now be at the case of IN=>SFN,
+ * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+ change_mask |= mask;
+ }
+
+ return change_mask;
+}
+
+static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
+{
+ void __iomem *con = chip->base + (index * 4);
+ u32 old_gpcon = __raw_readl(con);
+ u32 gps_gpcon = chip->pm_save[index + 1];
+ u32 gpcon, mask;
+
+ mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
+
+ gpcon = old_gpcon & ~mask;
+ gpcon |= gps_gpcon & mask;
+
+ __raw_writel(gpcon, con);
+}
+
+static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
+{
+ void __iomem *base = chip->base;
+ u32 old_gpcon[2];
+ u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+ u32 gps_gpdat = chip->pm_save[2];
+
+ /* First, modify the CON settings */
+
+ old_gpcon[0] = 0;
+ old_gpcon[1] = __raw_readl(base + OFFS_CON);
+
+ s3c_gpio_pm_4bit_con(chip, 0);
+ if (chip->chip.ngpio > 8) {
+ old_gpcon[0] = __raw_readl(base - 4);
+ s3c_gpio_pm_4bit_con(chip, -1);
+ }
+
+ /* Now change the configurations that require DAT,CON */
+
+ __raw_writel(chip->pm_save[2], base + OFFS_DAT);
+ __raw_writel(chip->pm_save[1], base + OFFS_CON);
+ if (chip->chip.ngpio > 8)
+ __raw_writel(chip->pm_save[0], base - 4);
+
+ __raw_writel(chip->pm_save[2], base + OFFS_DAT);
+ __raw_writel(chip->pm_save[3], base + OFFS_UP);
+
+ if (chip->chip.ngpio > 8) {
+ S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
+ chip->chip.label, old_gpcon[0], old_gpcon[1],
+ __raw_readl(base - 4),
+ __raw_readl(base + OFFS_CON),
+ old_gpdat, gps_gpdat);
+ } else
+ S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
+ chip->chip.label, old_gpcon[1],
+ __raw_readl(base + OFFS_CON),
+ old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_4bit = {
+ .save = s3c_gpio_pm_4bit_save,
+ .resume = s3c_gpio_pm_4bit_resume,
+};
+#endif /* CONFIG_ARCH_S3C64XX */
+
+/**
+ * s3c_pm_save_gpio() - save gpio chip data for suspend
+ * @ourchip: The chip for suspend.
+ */
+static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
+{
+ struct s3c_gpio_pm *pm = ourchip->pm;
+
+ if (pm == NULL || pm->save == NULL)
+ S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+ else
+ pm->save(ourchip);
+}
+
+/**
+ * s3c_pm_save_gpios() - Save the state of the GPIO banks.
+ *
+ * For all the GPIO banks, save the state of each one ready for going
+ * into a suspend mode.
+ */
+void s3c_pm_save_gpios(void)
+{
+ struct s3c_gpio_chip *ourchip;
+ unsigned int gpio_nr;
+
+ for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+ ourchip = s3c_gpiolib_getchip(gpio_nr);
+ if (!ourchip)
+ continue;
+
+ s3c_pm_save_gpio(ourchip);
+
+ S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
+ ourchip->chip.label,
+ ourchip->pm_save[0],
+ ourchip->pm_save[1],
+ ourchip->pm_save[2],
+ ourchip->pm_save[3]);
+
+ gpio_nr += ourchip->chip.ngpio;
+ gpio_nr += CONFIG_S3C_GPIO_SPACE;
+ }
+}
+
+/**
+ * s3c_pm_resume_gpio() - restore gpio chip data after suspend
+ * @ourchip: The suspended chip.
+ */
+static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
+{
+ struct s3c_gpio_pm *pm = ourchip->pm;
+
+ if (pm == NULL || pm->resume == NULL)
+ S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+ else
+ pm->resume(ourchip);
+}
+
+void s3c_pm_restore_gpios(void)
+{
+ struct s3c_gpio_chip *ourchip;
+ unsigned int gpio_nr;
+
+ for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+ ourchip = s3c_gpiolib_getchip(gpio_nr);
+ if (!ourchip)
+ continue;
+
+ s3c_pm_resume_gpio(ourchip);
+
+ gpio_nr += ourchip->chip.ngpio;
+ gpio_nr += CONFIG_S3C_GPIO_SPACE;
+ }
+}
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 061182c..8d97db2 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -21,11 +21,10 @@
#include <asm/cacheflush.h>
#include <mach/hardware.h>
+#include <mach/map.h>
#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
#include <mach/regs-irq.h>
#include <asm/irq.h>
@@ -70,6 +69,8 @@ static inline void s3c_pm_debug_init(void)
/* Save the UART configurations if we are configured for debug. */
+unsigned char pm_uart_udivslot;
+
#ifdef CONFIG_S3C2410_PM_DEBUG
struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
@@ -83,6 +84,12 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
save->ufcon = __raw_readl(regs + S3C2410_UFCON);
save->umcon = __raw_readl(regs + S3C2410_UMCON);
save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
+
+ if (pm_uart_udivslot)
+ save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
+
+ S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
+ uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
}
static void s3c_pm_save_uarts(void)
@@ -98,11 +105,16 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
{
void __iomem *regs = S3C_VA_UARTx(uart);
+ s3c_pm_arch_update_uart(regs, save);
+
__raw_writel(save->ulcon, regs + S3C2410_ULCON);
__raw_writel(save->ucon, regs + S3C2410_UCON);
__raw_writel(save->ufcon, regs + S3C2410_UFCON);
__raw_writel(save->umcon, regs + S3C2410_UMCON);
__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
+
+ if (pm_uart_udivslot)
+ __raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
}
static void s3c_pm_restore_uarts(void)
@@ -313,6 +325,9 @@ static int s3c_pm_enter(suspend_state_t state)
S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
+ /* LEDs should now be 1110 */
+ s3c_pm_debug_smdkled(1 << 1, 0);
+
s3c_pm_check_restore();
/* ok, let's return from sleep */
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 2c8a2f5..5b0bc91 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -71,6 +71,7 @@ config PM_SIMTEC
config S3C2410_DMA
bool "S3C2410 DMA support"
depends on ARCH_S3C2410
+ select S3C_DMA
help
S3C2410 DMA support. This is needed for drivers like sound which
use the S3C2410's DMA system to move data to and from the
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 91adfa7..ee1baf1 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -45,7 +45,8 @@ struct s3c_adc_client {
unsigned char channel;
void (*select_cb)(unsigned selected);
- void (*convert_cb)(unsigned val1, unsigned val2);
+ void (*convert_cb)(unsigned val1, unsigned val2,
+ unsigned *samples_left);
};
struct adc_device {
@@ -158,7 +159,8 @@ static void s3c_adc_default_select(unsigned select)
struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
void (*select)(unsigned int selected),
- void (*conv)(unsigned d0, unsigned d1),
+ void (*conv)(unsigned d0, unsigned d1,
+ unsigned *samples_left),
unsigned int is_ts)
{
struct s3c_adc_client *client;
@@ -227,9 +229,10 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
data1 = readl(adc->regs + S3C2410_ADCDAT1);
adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
- (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff);
+ client->nr_samples--;
+ (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
- if (--client->nr_samples > 0) {
+ if (client->nr_samples > 0) {
/* fire another conversion for this */
client->select_cb(1);
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 1a8347c..aa11986 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -18,6 +18,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>
@@ -47,27 +48,27 @@
/* LED devices */
static struct s3c24xx_led_platdata smdk_pdata_led4 = {
- .gpio = S3C2410_GPF4,
+ .gpio = S3C2410_GPF(4),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led4",
.def_trigger = "timer",
};
static struct s3c24xx_led_platdata smdk_pdata_led5 = {
- .gpio = S3C2410_GPF5,
+ .gpio = S3C2410_GPF(5),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led5",
.def_trigger = "nand-disk",
};
static struct s3c24xx_led_platdata smdk_pdata_led6 = {
- .gpio = S3C2410_GPF6,
+ .gpio = S3C2410_GPF(6),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led6",
};
static struct s3c24xx_led_platdata smdk_pdata_led7 = {
- .gpio = S3C2410_GPF7,
+ .gpio = S3C2410_GPF(7),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led7",
};
@@ -184,15 +185,15 @@ void __init smdk_machine_init(void)
{
/* Configure the LEDs (even if we have no LED support)*/
- s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
- s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
- s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
- s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPF4, 1);
- s3c2410_gpio_setpin(S3C2410_GPF5, 1);
- s3c2410_gpio_setpin(S3C2410_GPF6, 1);
- s3c2410_gpio_setpin(S3C2410_GPF7, 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
if (machine_is_smdk2443())
smdk_nand_info.twrph0 = 50;
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 16ac01d..4eb378c 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -136,36 +136,6 @@ struct platform_device *s3c24xx_uart_src[4] = {
struct platform_device *s3c24xx_uart_devs[4] = {
};
-/* USB Host Controller */
-
-static struct resource s3c_usb_resource[] = {
- [0] = {
- .start = S3C24XX_PA_USBHOST,
- .end = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBH,
- .end = IRQ_USBH,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 s3c_device_usb_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_usb = {
- .name = "s3c2410-ohci",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_usb_resource),
- .resource = s3c_usb_resource,
- .dev = {
- .dma_mask = &s3c_device_usb_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_usb);
-
/* LCD Controller */
static struct resource s3c_lcd_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 07326f6..196b191 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -31,10 +31,10 @@
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/dma.h>
-
#include <mach/map.h>
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
+#include <plat/regs-dma.h>
/* io map for dma */
static void __iomem *dma_base;
@@ -44,8 +44,6 @@ static int dma_channels;
static struct s3c24xx_dma_selection dma_sel;
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
/* debugging functions */
@@ -135,21 +133,6 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
#define dbg_showchan(chan) do { } while(0)
#endif /* CONFIG_S3C2410_DMA_DEBUG */
-static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
-
-/* lookup_dma_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
-{
- if (channel & DMACH_LOW_LEVEL)
- return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
- else
- return dma_chan_map[channel];
-}
-
/* s3c2410_dma_stats_timeout
*
* Update DMA stats from timeout info
@@ -214,8 +197,6 @@ s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
return 0;
}
-
-
/* s3c2410_dma_loadbuffer
*
* load a buffer, and update the channel state
@@ -453,7 +434,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
int s3c2410_dma_enqueue(unsigned int channel, void *id,
dma_addr_t data, int size)
{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
struct s3c2410_dma_buf *buf;
unsigned long flags;
@@ -804,7 +785,7 @@ EXPORT_SYMBOL(s3c2410_dma_request);
int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
unsigned long flags;
if (chan == NULL)
@@ -836,7 +817,7 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
chan->irq_claimed = 0;
if (!(channel & DMACH_LOW_LEVEL))
- dma_chan_map[channel] = NULL;
+ s3c_dma_chan_map[channel] = NULL;
local_irq_restore(flags);
@@ -995,7 +976,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
int
s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
if (chan == NULL)
return -EINVAL;
@@ -1038,14 +1019,13 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl);
/* s3c2410_dma_config
*
* xfersize: size of unit in bytes (1,2,4)
- * dcon: base value of the DCONx register
*/
int s3c2410_dma_config(unsigned int channel,
- int xferunit,
- int dcon)
+ int xferunit)
{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+ unsigned int dcon;
pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
__func__, channel, xferunit, dcon);
@@ -1055,10 +1035,33 @@ int s3c2410_dma_config(unsigned int channel,
pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
- dcon |= chan->dcon & dma_sel.dcon_mask;
+ dcon = chan->dcon & dma_sel.dcon_mask;
pr_debug("%s: New dcon is %08x\n", __func__, dcon);
+ switch (chan->req_ch) {
+ case DMACH_I2S_IN:
+ case DMACH_I2S_OUT:
+ case DMACH_PCM_IN:
+ case DMACH_PCM_OUT:
+ case DMACH_MIC_IN:
+ default:
+ dcon |= S3C2410_DCON_HANDSHAKE;
+ dcon |= S3C2410_DCON_SYNC_PCLK;
+ break;
+
+ case DMACH_SDI:
+ /* note, ensure if need HANDSHAKE or not */
+ dcon |= S3C2410_DCON_SYNC_PCLK;
+ break;
+
+ case DMACH_XD0:
+ case DMACH_XD1:
+ dcon |= S3C2410_DCON_HANDSHAKE;
+ dcon |= S3C2410_DCON_SYNC_HCLK;
+ break;
+ }
+
switch (xferunit) {
case 1:
dcon |= S3C2410_DCON_BYTE;
@@ -1090,58 +1093,6 @@ int s3c2410_dma_config(unsigned int channel,
EXPORT_SYMBOL(s3c2410_dma_config);
-int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags);
-
- chan->flags = flags;
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_setflags);
-
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
-
- chan->op_fn = rtn;
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
-
- chan->callback_fn = rtn;
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
/* s3c2410_dma_devconfig
*
@@ -1150,29 +1101,38 @@ EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
* source: S3C2410_DMASRC_HW: source is hardware
* S3C2410_DMASRC_MEM: source is memory
*
- * hwcfg: the value for xxxSTCn register,
- * bit 0: 0=increment pointer, 1=leave pointer
- * bit 1: 0=source is AHB, 1=source is APB
- *
* devaddr: physical address of the source
*/
int s3c2410_dma_devconfig(int channel,
enum s3c2410_dmasrc source,
- int hwcfg,
unsigned long devaddr)
{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+ unsigned int hwcfg;
if (chan == NULL)
return -EINVAL;
- pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
- __func__, (int)source, hwcfg, devaddr);
+ pr_debug("%s: source=%d, devaddr=%08lx\n",
+ __func__, (int)source, devaddr);
chan->source = source;
chan->dev_addr = devaddr;
- chan->hw_cfg = hwcfg;
+
+ switch (chan->req_ch) {
+ case DMACH_XD0:
+ case DMACH_XD1:
+ hwcfg = 0; /* AHB */
+ break;
+
+ default:
+ hwcfg = S3C2410_DISRCC_APB;
+ }
+
+ /* always assume our peripheral desintation is a fixed
+ * address in memory. */
+ hwcfg |= S3C2410_DISRCC_INC;
switch (source) {
case S3C2410_DMASRC_HW:
@@ -1219,7 +1179,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig);
int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst)
{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
if (chan == NULL)
return -EINVAL;
@@ -1278,8 +1238,8 @@ static int s3c2410_dma_resume(struct sys_device *dev)
printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
- s3c2410_dma_config(no, cp->xfer_unit, cp->dcon);
- s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr);
+ s3c2410_dma_config(no, cp->xfer_unit);
+ s3c2410_dma_devconfig(no, cp->source, cp->dev_addr);
/* re-select the dma source for this channel */
@@ -1476,7 +1436,8 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
found:
dmach = &s3c2410_chans[ch];
dmach->map = ch_map;
- dma_chan_map[channel] = dmach;
+ dmach->req_ch = channel;
+ s3c_dma_chan_map[channel] = dmach;
/* select the channel */
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index 4a899c2..95df059 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -183,35 +183,19 @@ EXPORT_SYMBOL(s3c2410_modify_misccr);
int s3c2410_gpio_getirq(unsigned int pin)
{
- if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
- return -1; /* not valid interrupts */
+ if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15))
+ return -EINVAL; /* not valid interrupts */
- if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
- return -1; /* not valid pin */
+ if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7))
+ return -EINVAL; /* not valid pin */
- if (pin < S3C2410_GPF4)
- return (pin - S3C2410_GPF0) + IRQ_EINT0;
+ if (pin < S3C2410_GPF(4))
+ return (pin - S3C2410_GPF(0)) + IRQ_EINT0;
- if (pin < S3C2410_GPG0)
- return (pin - S3C2410_GPF4) + IRQ_EINT4;
+ if (pin < S3C2410_GPG(0))
+ return (pin - S3C2410_GPF(4)) + IRQ_EINT4;
- return (pin - S3C2410_GPG0) + IRQ_EINT8;
+ return (pin - S3C2410_GPG(0)) + IRQ_EINT8;
}
EXPORT_SYMBOL(s3c2410_gpio_getirq);
-
-int s3c2410_gpio_irq2pin(unsigned int irq)
-{
- if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3)
- return S3C2410_GPF0 + (irq - IRQ_EINT0);
-
- if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7)
- return S3C2410_GPF4 + (irq - IRQ_EINT4);
-
- if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23)
- return S3C2410_GPG0 + (irq - IRQ_EINT8);
-
- return -EINVAL;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irq2pin);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 5c0491b..6d7a961 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/sysdev.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/gpio.h>
@@ -22,6 +23,7 @@
#include <mach/gpio-core.h>
#include <mach/hardware.h>
#include <asm/irq.h>
+#include <plat/pm.h>
#include <mach/regs-gpio.h>
@@ -77,9 +79,10 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset)
struct s3c_gpio_chip s3c24xx_gpios[] = {
[0] = {
- .base = S3C24XX_GPIO_BASE(S3C2410_GPA0),
+ .base = S3C2410_GPACON,
+ .pm = __gpio_pm(&s3c_gpio_pm_1bit),
.chip = {
- .base = S3C2410_GPA0,
+ .base = S3C2410_GPA(0),
.owner = THIS_MODULE,
.label = "GPIOA",
.ngpio = 24,
@@ -88,45 +91,50 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
},
},
[1] = {
- .base = S3C24XX_GPIO_BASE(S3C2410_GPB0),
+ .base = S3C2410_GPBCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPB0,
+ .base = S3C2410_GPB(0),
.owner = THIS_MODULE,
.label = "GPIOB",
.ngpio = 16,
},
},
[2] = {
- .base = S3C24XX_GPIO_BASE(S3C2410_GPC0),
+ .base = S3C2410_GPCCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPC0,
+ .base = S3C2410_GPC(0),
.owner = THIS_MODULE,
.label = "GPIOC",
.ngpio = 16,
},
},
[3] = {
- .base = S3C24XX_GPIO_BASE(S3C2410_GPD0),
+ .base = S3C2410_GPDCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPD0,
+ .base = S3C2410_GPD(0),
.owner = THIS_MODULE,
.label = "GPIOD",
.ngpio = 16,
},
},
[4] = {
- .base = S3C24XX_GPIO_BASE(S3C2410_GPE0),
+ .base = S3C2410_GPECON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPE0,
+ .base = S3C2410_GPE(0),
.label = "GPIOE",
.owner = THIS_MODULE,
.ngpio = 16,
},
},
[5] = {
- .base = S3C24XX_GPIO_BASE(S3C2410_GPF0),
+ .base = S3C2410_GPFCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPF0,
+ .base = S3C2410_GPF(0),
.owner = THIS_MODULE,
.label = "GPIOF",
.ngpio = 8,
@@ -134,14 +142,24 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
},
},
[6] = {
- .base = S3C24XX_GPIO_BASE(S3C2410_GPG0),
+ .base = S3C2410_GPGCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPG0,
+ .base = S3C2410_GPG(0),
.owner = THIS_MODULE,
.label = "GPIOG",
- .ngpio = 10,
+ .ngpio = 16,
.to_irq = s3c24xx_gpiolib_bankg_toirq,
},
+ }, {
+ .base = S3C2410_GPHCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
+ .chip = {
+ .base = S3C2410_GPH(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOH",
+ .ngpio = 11,
+ },
},
};
@@ -156,4 +174,4 @@ static __init int s3c24xx_gpiolib_init(void)
return 0;
}
-arch_initcall(s3c24xx_gpiolib_init);
+core_initcall(s3c24xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c24xx/include/plat/dma.h b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
index c78efe3..9565ead 100644
--- a/arch/arm/plat-s3c24xx/include/plat/dma.h
+++ b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/dma.h
+/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
*
* Copyright (C) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -10,8 +10,10 @@
* published by the Free Software Foundation.
*/
+#include <plat/dma-core.h>
+
extern struct sysdev_class dma_sysclass;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
#define DMA_CH_VALID (1<<31)
#define DMA_CH_NEVER (1<<30)
@@ -31,8 +33,8 @@ struct s3c24xx_dma_map {
const char *name;
struct s3c24xx_dma_addr hw_addr;
- unsigned long channels[S3C2410_DMA_CHANNELS];
- unsigned long channels_rx[S3C2410_DMA_CHANNELS];
+ unsigned long channels[S3C_DMA_CHANNELS];
+ unsigned long channels_rx[S3C_DMA_CHANNELS];
};
struct s3c24xx_dma_selection {
@@ -58,7 +60,7 @@ extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
*/
struct s3c24xx_dma_order_ch {
- unsigned int list[S3C2410_DMA_CHANNELS]; /* list of channels */
+ unsigned int list[S3C_DMA_CHANNELS]; /* list of channels */
unsigned int flags; /* flags */
};
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
index eed8f78..c4d1334 100644
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -58,7 +58,6 @@
#define S3C24XX_SZ_SPI SZ_1M
#define S3C24XX_SZ_SDI SZ_1M
#define S3C24XX_SZ_NAND SZ_1M
-#define S3C24XX_SZ_USBHOST SZ_1M
/* GPIO ports */
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
index c758821..fb45dd9 100644
--- a/arch/arm/plat-s3c24xx/include/plat/pm-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
@@ -57,3 +57,8 @@ static inline void s3c_pm_arch_show_resume_irqs(void)
s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
s3c_irqwake_eintmask);
}
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+ struct pm_uart_save *save)
+{
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
new file mode 100644
index 0000000..3bc0a21
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
@@ -0,0 +1,145 @@
+/* arch/arm/mach-s3c2410/include/mach/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* DMA Register definitions */
+
+#define S3C2410_DMA_DISRC (0x00)
+#define S3C2410_DMA_DISRCC (0x04)
+#define S3C2410_DMA_DIDST (0x08)
+#define S3C2410_DMA_DIDSTC (0x0C)
+#define S3C2410_DMA_DCON (0x10)
+#define S3C2410_DMA_DSTAT (0x14)
+#define S3C2410_DMA_DCSRC (0x18)
+#define S3C2410_DMA_DCDST (0x1C)
+#define S3C2410_DMA_DMASKTRIG (0x20)
+#define S3C2412_DMA_DMAREQSEL (0x24)
+#define S3C2443_DMA_DMAREQSEL (0x24)
+
+#define S3C2410_DISRCC_INC (1<<0)
+#define S3C2410_DISRCC_APB (1<<1)
+
+#define S3C2410_DMASKTRIG_STOP (1<<2)
+#define S3C2410_DMASKTRIG_ON (1<<1)
+#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
+
+#define S3C2410_DCON_DEMAND (0<<31)
+#define S3C2410_DCON_HANDSHAKE (1<<31)
+#define S3C2410_DCON_SYNC_PCLK (0<<30)
+#define S3C2410_DCON_SYNC_HCLK (1<<30)
+
+#define S3C2410_DCON_INTREQ (1<<29)
+
+#define S3C2410_DCON_CH0_XDREQ0 (0<<24)
+#define S3C2410_DCON_CH0_UART0 (1<<24)
+#define S3C2410_DCON_CH0_SDI (2<<24)
+#define S3C2410_DCON_CH0_TIMER (3<<24)
+#define S3C2410_DCON_CH0_USBEP1 (4<<24)
+
+#define S3C2410_DCON_CH1_XDREQ1 (0<<24)
+#define S3C2410_DCON_CH1_UART1 (1<<24)
+#define S3C2410_DCON_CH1_I2SSDI (2<<24)
+#define S3C2410_DCON_CH1_SPI (3<<24)
+#define S3C2410_DCON_CH1_USBEP2 (4<<24)
+
+#define S3C2410_DCON_CH2_I2SSDO (0<<24)
+#define S3C2410_DCON_CH2_I2SSDI (1<<24)
+#define S3C2410_DCON_CH2_SDI (2<<24)
+#define S3C2410_DCON_CH2_TIMER (3<<24)
+#define S3C2410_DCON_CH2_USBEP3 (4<<24)
+
+#define S3C2410_DCON_CH3_UART2 (0<<24)
+#define S3C2410_DCON_CH3_SDI (1<<24)
+#define S3C2410_DCON_CH3_SPI (2<<24)
+#define S3C2410_DCON_CH3_TIMER (3<<24)
+#define S3C2410_DCON_CH3_USBEP4 (4<<24)
+
+#define S3C2410_DCON_SRCSHIFT (24)
+#define S3C2410_DCON_SRCMASK (7<<24)
+
+#define S3C2410_DCON_BYTE (0<<20)
+#define S3C2410_DCON_HALFWORD (1<<20)
+#define S3C2410_DCON_WORD (2<<20)
+
+#define S3C2410_DCON_AUTORELOAD (0<<22)
+#define S3C2410_DCON_NORELOAD (1<<22)
+#define S3C2410_DCON_HWTRIG (1<<23)
+
+#ifdef CONFIG_CPU_S3C2440
+#define S3C2440_DIDSTC_CHKINT (1<<2)
+
+#define S3C2440_DCON_CH0_I2SSDO (5<<24)
+#define S3C2440_DCON_CH0_PCMIN (6<<24)
+
+#define S3C2440_DCON_CH1_PCMOUT (5<<24)
+#define S3C2440_DCON_CH1_SDI (6<<24)
+
+#define S3C2440_DCON_CH2_PCMIN (5<<24)
+#define S3C2440_DCON_CH2_MICIN (6<<24)
+
+#define S3C2440_DCON_CH3_MICIN (5<<24)
+#define S3C2440_DCON_CH3_PCMOUT (6<<24)
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+
+#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1)
+
+#define S3C2412_DMAREQSEL_HW (1)
+
+#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0)
+#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1)
+#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2)
+#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3)
+#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4)
+#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5)
+#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9)
+#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10)
+#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13)
+#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14)
+#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15)
+#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16)
+#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17)
+#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18)
+#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19)
+#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20)
+#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21)
+#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22)
+#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23)
+#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
+
+#endif
+
+#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1)
+
+#define S3C2443_DMAREQSEL_HW (1)
+
+#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 062a293..56e5253 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -30,6 +30,7 @@
#include <linux/suspend.h>
#include <linux/errno.h>
#include <linux/time.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/serial_core.h>
#include <linux/io.h>
@@ -75,43 +76,10 @@ static struct sleep_save core_save[] = {
SAVE_ITEM(S3C2410_CLKSLOW),
};
-static struct gpio_sleep {
- void __iomem *base;
- unsigned int gpcon;
- unsigned int gpdat;
- unsigned int gpup;
-} gpio_save[] = {
- [0] = {
- .base = S3C2410_GPACON,
- },
- [1] = {
- .base = S3C2410_GPBCON,
- },
- [2] = {
- .base = S3C2410_GPCCON,
- },
- [3] = {
- .base = S3C2410_GPDCON,
- },
- [4] = {
- .base = S3C2410_GPECON,
- },
- [5] = {
- .base = S3C2410_GPFCON,
- },
- [6] = {
- .base = S3C2410_GPGCON,
- },
- [7] = {
- .base = S3C2410_GPHCON,
- },
-};
-
static struct sleep_save misc_save[] = {
SAVE_ITEM(S3C2410_DCLKCON),
};
-
/* s3c_pm_check_resume_pin
*
* check to see if the pin is configured correctly for sleep mode, and
@@ -156,195 +124,15 @@ void s3c_pm_configure_extint(void)
* and then configure it as an input if it is not
*/
- for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
- s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
- }
-
- for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
- s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+ for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
+ s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
}
-}
-
-/* offsets for CON/DAT/UP registers */
-
-#define OFFS_CON (S3C2410_GPACON - S3C2410_GPACON)
-#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON)
-#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON)
-
-/* s3c_pm_save_gpios()
- *
- * Save the state of the GPIOs
- */
-
-void s3c_pm_save_gpios(void)
-{
- struct gpio_sleep *gps = gpio_save;
- unsigned int gpio;
-
- for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
- void __iomem *base = gps->base;
-
- gps->gpcon = __raw_readl(base + OFFS_CON);
- gps->gpdat = __raw_readl(base + OFFS_DAT);
-
- if (gpio > 0)
- gps->gpup = __raw_readl(base + OFFS_UP);
+ for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
+ s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
}
}
-/* Test whether the given masked+shifted bits of an GPIO configuration
- * are one of the SFN (special function) modes. */
-
-static inline int is_sfn(unsigned long con)
-{
- return (con == 2 || con == 3);
-}
-
-/* Test if the given masked+shifted GPIO configuration is an input */
-
-static inline int is_in(unsigned long con)
-{
- return con == 0;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an output */
-
-static inline int is_out(unsigned long con)
-{
- return con == 1;
-}
-
-/**
- * s3c2410_pm_restore_gpio() - restore the given GPIO bank
- * @index: The number of the GPIO bank being resumed.
- * @gps: The sleep confgiuration for the bank.
- *
- * Restore one of the GPIO banks that was saved during suspend. This is
- * not as simple as once thought, due to the possibility of glitches
- * from the order that the CON and DAT registers are set in.
- *
- * The three states the pin can be are {IN,OUT,SFN} which gives us 9
- * combinations of changes to check. Three of these, if the pin stays
- * in the same configuration can be discounted. This leaves us with
- * the following:
- *
- * { IN => OUT } Change DAT first
- * { IN => SFN } Change CON first
- * { OUT => SFN } Change CON first, so new data will not glitch
- * { OUT => IN } Change CON first, so new data will not glitch
- * { SFN => IN } Change CON first
- * { SFN => OUT } Change DAT first, so new data will not glitch [1]
- *
- * We do not currently deal with the UP registers as these control
- * weak resistors, so a small delay in change should not need to bring
- * these into the calculations.
- *
- * [1] this assumes that writing to a pin DAT whilst in SFN will set the
- * state for when it is next output.
- */
-
-static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
-{
- void __iomem *base = gps->base;
- unsigned long gps_gpcon = gps->gpcon;
- unsigned long gps_gpdat = gps->gpdat;
- unsigned long old_gpcon;
- unsigned long old_gpdat;
- unsigned long old_gpup = 0x0;
- unsigned long gpcon;
- int nr;
-
- old_gpcon = __raw_readl(base + OFFS_CON);
- old_gpdat = __raw_readl(base + OFFS_DAT);
-
- if (base == S3C2410_GPACON) {
- /* GPACON only has one bit per control / data and no PULLUPs.
- * GPACON[x] = 0 => Output, 1 => SFN */
-
- /* first set all SFN bits to SFN */
-
- gpcon = old_gpcon | gps->gpcon;
- __raw_writel(gpcon, base + OFFS_CON);
-
- /* now set all the other bits */
-
- __raw_writel(gps_gpdat, base + OFFS_DAT);
- __raw_writel(gps_gpcon, base + OFFS_CON);
- } else {
- unsigned long old, new, mask;
- unsigned long change_mask = 0x0;
-
- old_gpup = __raw_readl(base + OFFS_UP);
-
- /* Create a change_mask of all the items that need to have
- * their CON value changed before their DAT value, so that
- * we minimise the work between the two settings.
- */
-
- for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
- old = (old_gpcon & mask) >> nr;
- new = (gps_gpcon & mask) >> nr;
-
- /* If there is no change, then skip */
-
- if (old == new)
- continue;
-
- /* If both are special function, then skip */
-
- if (is_sfn(old) && is_sfn(new))
- continue;
-
- /* Change is IN => OUT, do not change now */
-
- if (is_in(old) && is_out(new))
- continue;
-
- /* Change is SFN => OUT, do not change now */
-
- if (is_sfn(old) && is_out(new))
- continue;
-
- /* We should now be at the case of IN=>SFN,
- * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
- change_mask |= mask;
- }
-
- /* Write the new CON settings */
-
- gpcon = old_gpcon & ~change_mask;
- gpcon |= gps_gpcon & change_mask;
-
- __raw_writel(gpcon, base + OFFS_CON);
-
- /* Now change any items that require DAT,CON */
-
- __raw_writel(gps_gpdat, base + OFFS_DAT);
- __raw_writel(gps_gpcon, base + OFFS_CON);
- __raw_writel(gps->gpup, base + OFFS_UP);
- }
-
- S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
- index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-
-/** s3c2410_pm_restore_gpios()
- *
- * Restore the state of the GPIOs
- */
-
-void s3c_pm_restore_gpios(void)
-{
- struct gpio_sleep *gps = gpio_save;
- int gpio;
-
- for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
- s3c2410_pm_restore_gpio(gpio, gps);
- }
-}
void s3c_pm_restore_core(void)
{
diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c
index d62b7e7..71a6acc 100644
--- a/arch/arm/plat-s3c24xx/setup-i2c.c
+++ b/arch/arm/plat-s3c24xx/setup-i2c.c
@@ -11,6 +11,7 @@
*/
#include <linux/kernel.h>
+#include <linux/gpio.h>
struct platform_device;
@@ -20,6 +21,6 @@ struct platform_device;
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
- s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
}
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 8b403cb..9edf789 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
int enable)
{
if (enable) {
- s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0);
- s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0);
- s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0);
- s3c2410_gpio_pullup(S3C2410_GPE11, 0);
- s3c2410_gpio_pullup(S3C2410_GPE13, 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
+ s3c2410_gpio_pullup(S3C2410_GPE(11), 0);
+ s3c2410_gpio_pullup(S3C2410_GPE(13), 0);
} else {
- s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT);
- s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT);
- s3c2410_gpio_pullup(S3C2410_GPE11, 1);
- s3c2410_gpio_pullup(S3C2410_GPE12, 1);
- s3c2410_gpio_pullup(S3C2410_GPE13, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_pullup(S3C2410_GPE(11), 1);
+ s3c2410_gpio_pullup(S3C2410_GPE(12), 1);
+ s3c2410_gpio_pullup(S3C2410_GPE(13), 1);
}
}
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index 8fccd4e..f34d0fc 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
int enable)
{
if (enable) {
- s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
- s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
- s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1);
- s3c2410_gpio_pullup(S3C2410_GPG5, 0);
- s3c2410_gpio_pullup(S3C2410_GPG6, 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
+ s3c2410_gpio_pullup(S3C2410_GPG(5), 0);
+ s3c2410_gpio_pullup(S3C2410_GPG(6), 0);
} else {
- s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT);
- s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT);
- s3c2410_gpio_pullup(S3C2410_GPG5, 1);
- s3c2410_gpio_pullup(S3C2410_GPG6, 1);
- s3c2410_gpio_pullup(S3C2410_GPG7, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_pullup(S3C2410_GPG(5), 1);
+ s3c2410_gpio_pullup(S3C2410_GPG(6), 1);
+ s3c2410_gpio_pullup(S3C2410_GPG(7), 1);
}
}
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 54375a0..5ebd8b4 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -19,6 +19,7 @@ config PLAT_S3C64XX
select S3C_GPIO_PULL_UPDOWN
select S3C_GPIO_CFG_S3C24XX
select S3C_GPIO_CFG_S3C64XX
+ select USB_ARCH_HAS_OHCI
help
Base platform code for any Samsung S3C64XX device
@@ -38,6 +39,10 @@ config CPU_S3C6400_CLOCK
Common clock support code for the S3C6400 that is shared
by other CPUs in the series, such as the S3C6410.
+config S3C64XX_DMA
+ bool "S3C64XX DMA"
+ select S3C_DMA
+
# platform specific device setup
config S3C64XX_SETUP_I2C0
@@ -59,4 +64,9 @@ config S3C64XX_SETUP_FB_24BPP
help
Common setup code for S3C64XX with an 24bpp RGB display helper.
+config S3C64XX_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for S3C64XX SDHCI GPIO configurations
+
endif
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 2e6d79b..2ed5df3 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -24,8 +24,19 @@ obj-y += gpiolib.o
obj-$(CONFIG_CPU_S3C6400_INIT) += s3c6400-init.o
obj-$(CONFIG_CPU_S3C6400_CLOCK) += s3c6400-clock.o
+# PM support
+
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM) += sleep.o
+obj-$(CONFIG_PM) += irq-pm.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_DMA) += dma.o
+
# Device setup
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o \ No newline at end of file
diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
index ad1b968..0bc2fa1 100644
--- a/arch/arm/plat-s3c64xx/clock.c
+++ b/arch/arm/plat-s3c64xx/clock.c
@@ -27,6 +27,12 @@
#include <plat/devs.h>
#include <plat/clock.h>
+struct clk clk_h2 = {
+ .name = "hclk2",
+ .id = -1,
+ .rate = 0,
+};
+
struct clk clk_27m = {
.name = "clk_27m",
.id = -1,
@@ -152,6 +158,18 @@ static struct clk init_clocks_disable[] = {
.parent = &clk_48m,
.enable = s3c64xx_sclk_ctrl,
.ctrlbit = S3C_CLKCON_SCLK_MMC2_48,
+ }, {
+ .name = "dma0",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_DMA0,
+ }, {
+ .name = "dma1",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_DMA1,
},
};
@@ -246,6 +264,7 @@ static struct clk *clks[] __initdata = {
&clk_epll,
&clk_27m,
&clk_48m,
+ &clk_h2,
};
void __init s3c64xx_register_clocks(void)
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
index 91f49a3..b1fdd8394 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/plat-s3c64xx/cpu.c
@@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
+#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -101,9 +102,24 @@ static struct map_desc s3c_iodesc[] __initdata = {
.pfn = __phys_to_pfn(S3C64XX_PA_MODEM),
.length = SZ_4K,
.type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
},
};
+
+struct sysdev_class s3c64xx_sysclass = {
+ .name = "s3c64xx-core",
+};
+
+static struct sys_device s3c64xx_sysdev = {
+ .cls = &s3c64xx_sysclass,
+};
+
+
/* read cpu identification code */
void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
@@ -115,5 +131,21 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
iotable_init(mach_desc, size);
idcode = __raw_readl(S3C_VA_SYS + 0x118);
+ if (!idcode) {
+ /* S3C6400 has the ID register in a different place,
+ * and needs a write before it can be read. */
+
+ __raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+ idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
+ }
+
s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
}
+
+static __init int s3c64xx_sysdev_init(void)
+{
+ sysdev_class_register(&s3c64xx_sysclass);
+ return sysdev_register(&s3c64xx_sysdev);
+}
+
+core_initcall(s3c64xx_sysdev_init);
diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
new file mode 100644
index 0000000..67aa93d
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -0,0 +1,722 @@
+/* linux/arch/arm/plat-s3c64xx/dma.c
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Copyright 2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dmapool.h>
+#include <linux/sysdev.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/dma-plat.h>
+#include <plat/regs-sys.h>
+
+#include <asm/hardware/pl080.h>
+
+/* dma channel state information */
+
+struct s3c64xx_dmac {
+ struct sys_device sysdev;
+ struct clk *clk;
+ void __iomem *regs;
+ struct s3c2410_dma_chan *channels;
+ enum dma_ch chanbase;
+};
+
+/* pool to provide LLI buffers */
+static struct dma_pool *dma_pool;
+
+/* Debug configuration and code */
+
+static unsigned char debug_show_buffs = 0;
+
+static void dbg_showchan(struct s3c2410_dma_chan *chan)
+{
+ pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
+ chan->number,
+ readl(chan->regs + PL080_CH_SRC_ADDR),
+ readl(chan->regs + PL080_CH_DST_ADDR),
+ readl(chan->regs + PL080_CH_LLI),
+ readl(chan->regs + PL080_CH_CONTROL),
+ readl(chan->regs + PL080S_CH_CONTROL2),
+ readl(chan->regs + PL080S_CH_CONFIG));
+}
+
+static void show_lli(struct pl080s_lli *lli)
+{
+ pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
+ lli, lli->src_addr, lli->dst_addr, lli->next_lli,
+ lli->control0, lli->control1);
+}
+
+static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
+{
+ struct s3c64xx_dma_buff *ptr;
+ struct s3c64xx_dma_buff *end;
+
+ pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
+ chan->number, chan->next, chan->curr, chan->end);
+
+ ptr = chan->next;
+ end = chan->end;
+
+ if (debug_show_buffs) {
+ for (; ptr != NULL; ptr = ptr->next) {
+ pr_debug("DMA%d: %08x ",
+ chan->number, ptr->lli_dma);
+ show_lli(ptr->lli);
+ }
+ }
+}
+
+/* End of Debug */
+
+static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
+{
+ struct s3c2410_dma_chan *chan;
+ unsigned int start, offs;
+
+ start = 0;
+
+ if (channel >= DMACH_PCM1_TX)
+ start = 8;
+
+ for (offs = 0; offs < 8; offs++) {
+ chan = &s3c2410_chans[start + offs];
+ if (!chan->in_use)
+ goto found;
+ }
+
+ return NULL;
+
+found:
+ s3c_dma_chan_map[channel] = chan;
+ return chan;
+}
+
+int s3c2410_dma_config(unsigned int channel, int xferunit)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ switch (xferunit) {
+ case 1:
+ chan->hw_width = 0;
+ break;
+ case 2:
+ chan->hw_width = 1;
+ break;
+ case 4:
+ chan->hw_width = 2;
+ break;
+ default:
+ printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
+ struct pl080s_lli *lli,
+ dma_addr_t data, int size)
+{
+ dma_addr_t src, dst;
+ u32 control0, control1;
+
+ switch (chan->source) {
+ case S3C2410_DMASRC_HW:
+ src = chan->dev_addr;
+ dst = data;
+ control0 = PL080_CONTROL_SRC_AHB2;
+ control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
+ control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT;
+ control0 |= PL080_CONTROL_DST_INCR;
+ break;
+
+ case S3C2410_DMASRC_MEM:
+ src = data;
+ dst = chan->dev_addr;
+ control0 = PL080_CONTROL_DST_AHB2;
+ control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
+ control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT;
+ control0 |= PL080_CONTROL_SRC_INCR;
+ break;
+ default:
+ BUG();
+ }
+
+ /* note, we do not currently setup any of the burst controls */
+
+ control1 = size >> chan->hw_width; /* size in no of xfers */
+ control0 |= PL080_CONTROL_PROT_SYS; /* always in priv. mode */
+ control0 |= PL080_CONTROL_TC_IRQ_EN; /* always fire IRQ */
+
+ lli->src_addr = src;
+ lli->dst_addr = dst;
+ lli->next_lli = 0;
+ lli->control0 = control0;
+ lli->control1 = control1;
+}
+
+static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
+ struct pl080s_lli *lli)
+{
+ void __iomem *regs = chan->regs;
+
+ pr_debug("%s: LLI %p => regs\n", __func__, lli);
+ show_lli(lli);
+
+ writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
+ writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
+ writel(lli->next_lli, regs + PL080_CH_LLI);
+ writel(lli->control0, regs + PL080_CH_CONTROL);
+ writel(lli->control1, regs + PL080S_CH_CONTROL2);
+}
+
+static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
+{
+ struct s3c64xx_dmac *dmac = chan->dmac;
+ u32 config;
+ u32 bit = chan->bit;
+
+ dbg_showchan(chan);
+
+ pr_debug("%s: clearing interrupts\n", __func__);
+
+ /* clear interrupts */
+ writel(bit, dmac->regs + PL080_TC_CLEAR);
+ writel(bit, dmac->regs + PL080_ERR_CLEAR);
+
+ pr_debug("%s: starting channel\n", __func__);
+
+ config = readl(chan->regs + PL080S_CH_CONFIG);
+ config |= PL080_CONFIG_ENABLE;
+
+ pr_debug("%s: writing config %08x\n", __func__, config);
+ writel(config, chan->regs + PL080S_CH_CONFIG);
+
+ return 0;
+}
+
+static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
+{
+ u32 config;
+ int timeout;
+
+ pr_debug("%s: stopping channel\n", __func__);
+
+ dbg_showchan(chan);
+
+ config = readl(chan->regs + PL080S_CH_CONFIG);
+ config |= PL080_CONFIG_HALT;
+ writel(config, chan->regs + PL080S_CH_CONFIG);
+
+ timeout = 1000;
+ do {
+ config = readl(chan->regs + PL080S_CH_CONFIG);
+ pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
+ if (config & PL080_CONFIG_ACTIVE)
+ udelay(10);
+ else
+ break;
+ } while (--timeout > 0);
+
+ if (config & PL080_CONFIG_ACTIVE) {
+ printk(KERN_ERR "%s: channel still active\n", __func__);
+ return -EFAULT;
+ }
+
+ config = readl(chan->regs + PL080S_CH_CONFIG);
+ config &= ~PL080_CONFIG_ENABLE;
+ writel(config, chan->regs + PL080S_CH_CONFIG);
+
+ return 0;
+}
+
+static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
+ struct s3c64xx_dma_buff *buf,
+ enum s3c2410_dma_buffresult result)
+{
+ if (chan->callback_fn != NULL)
+ (chan->callback_fn)(chan, buf->pw, 0, result);
+}
+
+static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
+{
+ dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
+ kfree(buff);
+}
+
+static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
+{
+ struct s3c64xx_dma_buff *buff, *next;
+ u32 config;
+
+ dbg_showchan(chan);
+
+ pr_debug("%s: flushing channel\n", __func__);
+
+ config = readl(chan->regs + PL080S_CH_CONFIG);
+ config &= ~PL080_CONFIG_ENABLE;
+ writel(config, chan->regs + PL080S_CH_CONFIG);
+
+ /* dump all the buffers associated with this channel */
+
+ for (buff = chan->curr; buff != NULL; buff = next) {
+ next = buff->next;
+ pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
+
+ s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
+ s3c64xx_dma_freebuff(buff);
+ }
+
+ chan->curr = chan->next = chan->end = NULL;
+
+ return 0;
+}
+
+int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+ WARN_ON(!chan);
+ if (!chan)
+ return -EINVAL;
+
+ switch (op) {
+ case S3C2410_DMAOP_START:
+ return s3c64xx_dma_start(chan);
+
+ case S3C2410_DMAOP_STOP:
+ return s3c64xx_dma_stop(chan);
+
+ case S3C2410_DMAOP_FLUSH:
+ return s3c64xx_dma_flush(chan);
+
+ /* belive PAUSE/RESUME are no-ops */
+ case S3C2410_DMAOP_PAUSE:
+ case S3C2410_DMAOP_RESUME:
+ case S3C2410_DMAOP_STARTED:
+ case S3C2410_DMAOP_TIMEOUT:
+ return 0;
+ }
+
+ return -ENOENT;
+}
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+/* s3c2410_dma_enque
+ *
+ */
+
+int s3c2410_dma_enqueue(unsigned int channel, void *id,
+ dma_addr_t data, int size)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+ struct s3c64xx_dma_buff *next;
+ struct s3c64xx_dma_buff *buff;
+ struct pl080s_lli *lli;
+ int ret;
+
+ WARN_ON(!chan);
+ if (!chan)
+ return -EINVAL;
+
+ buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL);
+ if (!buff) {
+ printk(KERN_ERR "%s: no memory for buffer\n", __func__);
+ return -ENOMEM;
+ }
+
+ lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma);
+ if (!lli) {
+ printk(KERN_ERR "%s: no memory for lli\n", __func__);
+ ret = -ENOMEM;
+ goto err_buff;
+ }
+
+ pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
+ __func__, buff, data, lli, (u32)buff->lli_dma, size);
+
+ buff->lli = lli;
+ buff->pw = id;
+
+ s3c64xx_dma_fill_lli(chan, lli, data, size);
+
+ if ((next = chan->next) != NULL) {
+ struct s3c64xx_dma_buff *end = chan->end;
+ struct pl080s_lli *endlli = end->lli;
+
+ pr_debug("enquing onto channel\n");
+
+ end->next = buff;
+ endlli->next_lli = buff->lli_dma;
+
+ if (chan->flags & S3C2410_DMAF_CIRCULAR) {
+ struct s3c64xx_dma_buff *curr = chan->curr;
+ lli->next_lli = curr->lli_dma;
+ }
+
+ if (next == chan->curr) {
+ writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
+ chan->next = buff;
+ }
+
+ show_lli(endlli);
+ chan->end = buff;
+ } else {
+ pr_debug("enquing onto empty channel\n");
+
+ chan->curr = buff;
+ chan->next = buff;
+ chan->end = buff;
+
+ s3c64xx_lli_to_regs(chan, lli);
+ }
+
+ show_lli(lli);
+
+ dbg_showchan(chan);
+ dbg_showbuffs(chan);
+ return 0;
+
+err_buff:
+ kfree(buff);
+ return ret;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+
+int s3c2410_dma_devconfig(int channel,
+ enum s3c2410_dmasrc source,
+ unsigned long devaddr)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+ u32 peripheral;
+ u32 config = 0;
+
+ pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
+ __func__, channel, source, devaddr, chan);
+
+ WARN_ON(!chan);
+ if (!chan)
+ return -EINVAL;
+
+ peripheral = (chan->peripheral & 0xf);
+ chan->source = source;
+ chan->dev_addr = devaddr;
+
+ pr_debug("%s: peripheral %d\n", __func__, peripheral);
+
+ switch (source) {
+ case S3C2410_DMASRC_HW:
+ config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
+ break;
+ case S3C2410_DMASRC_MEM:
+ config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
+ break;
+ default:
+ printk(KERN_ERR "%s: bad source\n", __func__);
+ return -EINVAL;
+ }
+
+ /* allow TC and ERR interrupts */
+ config |= PL080_CONFIG_TC_IRQ_MASK;
+ config |= PL080_CONFIG_ERR_IRQ_MASK;
+
+ pr_debug("%s: config %08x\n", __func__, config);
+
+ writel(config, chan->regs + PL080S_CH_CONFIG);
+
+ return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+
+int s3c2410_dma_getposition(unsigned int channel,
+ dma_addr_t *src, dma_addr_t *dst)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+ WARN_ON(!chan);
+ if (!chan)
+ return -EINVAL;
+
+ if (src != NULL)
+ *src = readl(chan->regs + PL080_CH_SRC_ADDR);
+
+ if (dst != NULL)
+ *dst = readl(chan->regs + PL080_CH_DST_ADDR);
+
+ return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+/* s3c2410_request_dma
+ *
+ * get control of an dma channel
+*/
+
+int s3c2410_dma_request(unsigned int channel,
+ struct s3c2410_dma_client *client,
+ void *dev)
+{
+ struct s3c2410_dma_chan *chan;
+ unsigned long flags;
+
+ pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
+ channel, client->name, dev);
+
+ local_irq_save(flags);
+
+ chan = s3c64xx_dma_map_channel(channel);
+ if (chan == NULL) {
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ dbg_showchan(chan);
+
+ chan->client = client;
+ chan->in_use = 1;
+ chan->peripheral = channel;
+
+ local_irq_restore(flags);
+
+ /* need to setup */
+
+ pr_debug("%s: channel initialised, %p\n", __func__, chan);
+
+ return chan->number | DMACH_LOW_LEVEL;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+/* s3c2410_dma_free
+ *
+ * release the given channel back to the system, will stop and flush
+ * any outstanding transfers, and ensure the channel is ready for the
+ * next claimant.
+ *
+ * Note, although a warning is currently printed if the freeing client
+ * info is not the same as the registrant's client info, the free is still
+ * allowed to go through.
+*/
+
+int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+ unsigned long flags;
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ if (chan->client != client) {
+ printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
+ channel, chan->client, client);
+ }
+
+ /* sort out stopping and freeing the channel */
+
+
+ chan->client = NULL;
+ chan->in_use = 0;
+
+ if (!(channel & DMACH_LOW_LEVEL))
+ s3c_dma_chan_map[channel] = NULL;
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+
+static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs)
+{
+ struct s3c2410_dma_chan *chan = dmac->channels + offs;
+
+ /* note, we currently do not bother to work out which buffer
+ * or buffers have been completed since the last tc-irq. */
+
+ if (chan->callback_fn)
+ (chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK);
+}
+
+static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs)
+{
+ printk(KERN_DEBUG "%s: offs %d\n", __func__, offs);
+}
+
+static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
+{
+ struct s3c64xx_dmac *dmac = pw;
+ u32 tcstat, errstat;
+ u32 bit;
+ int offs;
+
+ tcstat = readl(dmac->regs + PL080_TC_STATUS);
+ errstat = readl(dmac->regs + PL080_ERR_STATUS);
+
+ for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
+ if (tcstat & bit) {
+ writel(bit, dmac->regs + PL080_TC_CLEAR);
+ s3c64xx_dma_tcirq(dmac, offs);
+ }
+
+ if (errstat & bit) {
+ s3c64xx_dma_errirq(dmac, offs);
+ writel(bit, dmac->regs + PL080_ERR_CLEAR);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct sysdev_class dma_sysclass = {
+ .name = "s3c64xx-dma",
+};
+
+static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
+ int irq, unsigned int base)
+{
+ struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
+ struct s3c64xx_dmac *dmac;
+ char clkname[16];
+ void __iomem *regs;
+ void __iomem *regptr;
+ int err, ch;
+
+ dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
+ if (!dmac) {
+ printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
+ return -ENOMEM;
+ }
+
+ dmac->sysdev.id = chno / 8;
+ dmac->sysdev.cls = &dma_sysclass;
+
+ err = sysdev_register(&dmac->sysdev);
+ if (err) {
+ printk(KERN_ERR "%s: failed to register sysdevice\n", __func__);
+ goto err_alloc;
+ }
+
+ regs = ioremap(base, 0x200);
+ if (!regs) {
+ printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
+ err = -ENXIO;
+ goto err_dev;
+ }
+
+ snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id);
+
+ dmac->clk = clk_get(NULL, clkname);
+ if (IS_ERR(dmac->clk)) {
+ printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
+ err = PTR_ERR(dmac->clk);
+ goto err_map;
+ }
+
+ clk_enable(dmac->clk);
+
+ dmac->regs = regs;
+ dmac->chanbase = chbase;
+ dmac->channels = chptr;
+
+ err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
+ if (err < 0) {
+ printk(KERN_ERR "%s: failed to get irq\n", __func__);
+ goto err_clk;
+ }
+
+ regptr = regs + PL080_Cx_BASE(0);
+
+ for (ch = 0; ch < 8; ch++, chno++, chptr++) {
+ printk(KERN_INFO "%s: registering DMA %d (%p)\n",
+ __func__, chno, regptr);
+
+ chptr->bit = 1 << ch;
+ chptr->number = chno;
+ chptr->dmac = dmac;
+ chptr->regs = regptr;
+ regptr += PL008_Cx_STRIDE;
+ }
+
+ /* for the moment, permanently enable the controller */
+ writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
+
+ printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
+
+ return 0;
+
+err_clk:
+ clk_disable(dmac->clk);
+ clk_put(dmac->clk);
+err_map:
+ iounmap(regs);
+err_dev:
+ sysdev_unregister(&dmac->sysdev);
+err_alloc:
+ kfree(dmac);
+ return err;
+}
+
+static int __init s3c64xx_dma_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
+
+ dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0);
+ if (!dma_pool) {
+ printk(KERN_ERR "%s: failed to create pool\n", __func__);
+ return -ENOMEM;
+ }
+
+ ret = sysdev_class_register(&dma_sysclass);
+ if (ret) {
+ printk(KERN_ERR "%s: failed to create sysclass\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* Set all DMA configuration to be DMA, not SDMA */
+ writel(0xffffff, S3C_SYSREG(0x110));
+
+ /* Register standard DMA controlers */
+ s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
+ s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
+
+ return 0;
+}
+
+arch_initcall(s3c64xx_dma_init);
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
index 78ee52c..da7b60e 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -385,12 +385,19 @@ static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
{
chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
+ chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
}
static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
{
chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
+ chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
+{
+ chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
}
static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
@@ -412,7 +419,8 @@ static __init int s3c64xx_gpiolib_init(void)
s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
s3c64xx_gpiolib_add_4bit2);
- s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), NULL);
+ s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
+ s3c64xx_gpiolib_add_2bit);
return 0;
}
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
new file mode 100644
index 0000000..0c30dd9
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Copyright 2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
+
+struct s3c64xx_dma_buff;
+
+/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
+ * @next: Pointer to next buffer in queue or ring.
+ * @pw: Client provided identifier
+ * @lli: Pointer to hardware descriptor this buffer is associated with.
+ * @lli_dma: Hardare address of the descriptor.
+ */
+struct s3c64xx_dma_buff {
+ struct s3c64xx_dma_buff *next;
+
+ void *pw;
+ struct pl080_lli *lli;
+ dma_addr_t lli_dma;
+};
+
+struct s3c64xx_dmac;
+
+struct s3c2410_dma_chan {
+ unsigned char number; /* number of this dma channel */
+ unsigned char in_use; /* channel allocated */
+ unsigned char bit; /* bit for enable/disable/etc */
+ unsigned char hw_width;
+ unsigned char peripheral;
+
+ unsigned int flags;
+ enum s3c2410_dmasrc source;
+
+
+ dma_addr_t dev_addr;
+
+ struct s3c2410_dma_client *client;
+ struct s3c64xx_dmac *dmac; /* pointer to controller */
+
+ void __iomem *regs;
+
+ /* cdriver callbacks */
+ s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */
+ s3c2410_dma_opfn_t op_fn; /* channel op callback */
+
+ /* buffer list and information */
+ struct s3c64xx_dma_buff *curr; /* current dma buffer */
+ struct s3c64xx_dma_buff *next; /* next buffer to load */
+ struct s3c64xx_dma_buff *end; /* end of queue */
+
+ /* note, when channel is running in circular mode, curr is the
+ * first buffer enqueued, end is the last and curr is where the
+ * last buffer-done event is set-at. The buffers are not freed
+ * and the last buffer hardware descriptor points back to the
+ * first.
+ */
+};
+
+#include <plat/dma-core.h>
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
index f865bf4..743a700 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@@ -157,6 +157,7 @@
#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE)
#define IRQ_EINT(x) S3C_EINT(x)
+#define IRQ_EINT_BIT(x) ((x) - S3C_EINT(0))
/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
* that they are sourced from the GPIO pins but with a different scheme for
diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/plat-s3c64xx/include/plat/pm-core.h
new file mode 100644
index 0000000..d347de3
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/include/plat/pm-core.h
@@ -0,0 +1,98 @@
+/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/regs-gpio.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+ u32 tmp = __raw_readl(S3C_PCLK_GATE);
+
+ /* As a note, since the S3C64XX UARTs generally have multiple
+ * clock sources, we simply enable PCLK at the moment and hope
+ * that the resume settings for the UART are suitable for the
+ * use with PCLK.
+ */
+
+ tmp |= S3C_CLKCON_PCLK_UART0;
+ tmp |= S3C_CLKCON_PCLK_UART1;
+ tmp |= S3C_CLKCON_PCLK_UART2;
+ tmp |= S3C_CLKCON_PCLK_UART3;
+
+ __raw_writel(tmp, S3C_PCLK_GATE);
+ udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+ /* VIC should have already been taken care of */
+
+ /* clear any pending EINT0 interrupts */
+ __raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+}
+
+/* make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on */
+
+#define s3c_irqwake_eintallow ((1 << 28) - 1)
+#define s3c_irqwake_intallow (0)
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+ struct pm_uart_save *save)
+{
+ u32 ucon = __raw_readl(regs + S3C2410_UCON);
+ u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+ u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+ u32 new_ucon;
+ u32 delta;
+
+ /* S3C64XX UART blocks only support level interrupts, so ensure that
+ * when we restore unused UART blocks we force the level interrupt
+ * settigs. */
+ save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+ /* We have a constraint on changing the clock type of the UART
+ * between UCLKx and PCLK, so ensure that when we restore UCON
+ * that the CLK field is correctly modified if the bootloader
+ * has changed anything.
+ */
+ if (ucon_clk != save_clk) {
+ new_ucon = save->ucon;
+ delta = ucon_clk ^ save_clk;
+
+ /* change from UCLKx => wrong PCLK,
+ * either UCLK can be tested for by a bit-test
+ * with UCLK0 */
+ if (ucon_clk & S3C6400_UCON_UCLK0 &&
+ !(save_clk & S3C6400_UCON_UCLK0) &&
+ delta & S3C6400_UCON_PCLK2) {
+ new_ucon &= ~S3C6400_UCON_UCLK0;
+ } else if (delta == S3C6400_UCON_PCLK2) {
+ /* as an precaution, don't change from
+ * PCLK2 => PCLK or vice-versa */
+ new_ucon ^= S3C6400_UCON_PCLK2;
+ }
+
+ S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+ ucon, new_ucon, save->ucon);
+ save->ucon = new_ucon;
+ }
+}
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
index b1082c1..52836d4 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
@@ -32,6 +32,7 @@
#define S3C_HCLK_GATE S3C_CLKREG(0x30)
#define S3C_PCLK_GATE S3C_CLKREG(0x34)
#define S3C_SCLK_GATE S3C_CLKREG(0x38)
+#define S3C_MEM0_GATE S3C_CLKREG(0x3C)
/* CLKDIV0 */
#define S3C6400_CLKDIV0_MFC_MASK (0xf << 28)
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
index 571eaa2..11f2e1e 100644
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+++ b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
@@ -15,12 +15,13 @@
/* Common init code for S3C6400 related SoCs */
extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_register_clocks(void);
+extern void s3c6400_register_clocks(unsigned armclk_divlimit);
extern void s3c6400_setup_clocks(void);
#ifdef CONFIG_CPU_S3C6400
extern int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
extern void s3c6400_map_io(void);
extern void s3c6400_init_clocks(int xtal);
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
index 47e5155..f81b7b8 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/plat-s3c64xx/irq-eint.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/sysdev.h>
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/io.h>
@@ -26,6 +27,7 @@
#include <mach/map.h>
#include <plat/cpu.h>
+#include <plat/pm.h>
#define eint_offset(irq) ((irq) - IRQ_EINT(0))
#define eint_irq_to_bit(irq) (1 << eint_offset(irq))
@@ -134,6 +136,7 @@ static struct irq_chip s3c_irq_eint = {
.mask_ack = s3c_irq_eint_maskack,
.ack = s3c_irq_eint_ack,
.set_type = s3c_irq_eint_set_type,
+ .set_wake = s3c_irqext_wake,
};
/* s3c_irq_demux_eint
diff --git a/arch/arm/plat-s3c64xx/irq-pm.c b/arch/arm/plat-s3c64xx/irq-pm.c
new file mode 100644
index 0000000..ca523b5
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/irq-pm.c
@@ -0,0 +1,111 @@
+/* arch/arm/plat-s3c64xx/irq-pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling Power Management
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-timer.h>
+#include <plat/regs-gpio.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+/* We handled all the IRQ types in this code, to save having to make several
+ * small files to handle each different type separately. Having the EINT_GRP
+ * code here shouldn't be as much bloat as the IRQ table space needed when
+ * they are enabled. The added benefit is we ensure that these registers are
+ * in the same state as we suspended.
+ */
+
+static struct sleep_save irq_save[] = {
+ SAVE_ITEM(S3C64XX_PRIORITY),
+ SAVE_ITEM(S3C64XX_EINT0CON0),
+ SAVE_ITEM(S3C64XX_EINT0CON1),
+ SAVE_ITEM(S3C64XX_EINT0FLTCON0),
+ SAVE_ITEM(S3C64XX_EINT0FLTCON1),
+ SAVE_ITEM(S3C64XX_EINT0FLTCON2),
+ SAVE_ITEM(S3C64XX_EINT0FLTCON3),
+ SAVE_ITEM(S3C64XX_EINT0MASK),
+ SAVE_ITEM(S3C64XX_TINT_CSTAT),
+};
+
+static struct irq_grp_save {
+ u32 fltcon;
+ u32 con;
+ u32 mask;
+} eint_grp_save[5];
+
+static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+ struct irq_grp_save *grp = eint_grp_save;
+ int i;
+
+ S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+ s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+ for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+ irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+ for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+ grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
+ grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
+ grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
+ }
+
+ return 0;
+}
+
+static int s3c64xx_irq_pm_resume(struct sys_device *dev)
+{
+ struct irq_grp_save *grp = eint_grp_save;
+ int i;
+
+ S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+ s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+ for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+ __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+ for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+ __raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
+ __raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
+ __raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
+ }
+
+ S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+ return 0;
+}
+
+static struct sysdev_driver s3c64xx_irq_driver = {
+ .suspend = s3c64xx_irq_pm_suspend,
+ .resume = s3c64xx_irq_pm_resume,
+};
+
+static int __init s3c64xx_irq_pm_init(void)
+{
+ return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver);
+}
+
+arch_initcall(s3c64xx_irq_pm_init);
+
diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c
index f22edf7..8dc5b6d 100644
--- a/arch/arm/plat-s3c64xx/irq.c
+++ b/arch/arm/plat-s3c64xx/irq.c
@@ -14,12 +14,14 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/serial_core.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/hardware/vic.h>
#include <mach/map.h>
+#include <plat/regs-serial.h>
#include <plat/regs-timer.h>
#include <plat/cpu.h>
@@ -135,9 +137,6 @@ static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
}
/* UART interrupt registers, not worth adding to seperate include header */
-#define S3C64XX_UINTP 0x30
-#define S3C64XX_UINTSP 0x34
-#define S3C64XX_UINTM 0x38
static void s3c_irq_uart_mask(unsigned int irq)
{
@@ -233,8 +232,8 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
/* initialise the pair of VICs */
- vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid);
- vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid);
+ vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0);
+ vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0);
/* add the timer sub-irqs */
diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c
new file mode 100644
index 0000000..07a6516
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/pm.c
@@ -0,0 +1,175 @@
+/* linux/arch/arm/plat-s3c64xx/pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU PM support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/pm.h>
+#include <plat/regs-sys.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-clock.h>
+#include <plat/regs-syscon-power.h>
+#include <plat/regs-gpio-memport.h>
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+#include <plat/gpio-bank-n.h>
+
+void s3c_pm_debug_smdkled(u32 set, u32 clear)
+{
+ unsigned long flags;
+ u32 reg;
+
+ local_irq_save(flags);
+ reg = __raw_readl(S3C64XX_GPNCON);
+ reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
+ S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
+ reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
+ S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
+ __raw_writel(reg, S3C64XX_GPNCON);
+
+ reg = __raw_readl(S3C64XX_GPNDAT);
+ reg &= ~(clear << 12);
+ reg |= set << 12;
+ __raw_writel(reg, S3C64XX_GPNDAT);
+
+ local_irq_restore(flags);
+}
+#endif
+
+static struct sleep_save core_save[] = {
+ SAVE_ITEM(S3C_APLL_LOCK),
+ SAVE_ITEM(S3C_MPLL_LOCK),
+ SAVE_ITEM(S3C_EPLL_LOCK),
+ SAVE_ITEM(S3C_CLK_SRC),
+ SAVE_ITEM(S3C_CLK_DIV0),
+ SAVE_ITEM(S3C_CLK_DIV1),
+ SAVE_ITEM(S3C_CLK_DIV2),
+ SAVE_ITEM(S3C_CLK_OUT),
+ SAVE_ITEM(S3C_HCLK_GATE),
+ SAVE_ITEM(S3C_PCLK_GATE),
+ SAVE_ITEM(S3C_SCLK_GATE),
+ SAVE_ITEM(S3C_MEM0_GATE),
+
+ SAVE_ITEM(S3C_EPLL_CON1),
+ SAVE_ITEM(S3C_EPLL_CON0),
+
+ SAVE_ITEM(S3C64XX_MEM0DRVCON),
+ SAVE_ITEM(S3C64XX_MEM1DRVCON),
+
+#ifndef CONFIG_CPU_FREQ
+ SAVE_ITEM(S3C_APLL_CON),
+ SAVE_ITEM(S3C_MPLL_CON),
+#endif
+};
+
+static struct sleep_save misc_save[] = {
+ SAVE_ITEM(S3C64XX_AHB_CON0),
+ SAVE_ITEM(S3C64XX_AHB_CON1),
+ SAVE_ITEM(S3C64XX_AHB_CON2),
+
+ SAVE_ITEM(S3C64XX_SPCON),
+
+ SAVE_ITEM(S3C64XX_MEM0CONSTOP),
+ SAVE_ITEM(S3C64XX_MEM1CONSTOP),
+ SAVE_ITEM(S3C64XX_MEM0CONSLP0),
+ SAVE_ITEM(S3C64XX_MEM0CONSLP1),
+ SAVE_ITEM(S3C64XX_MEM1CONSLP),
+};
+
+void s3c_pm_configure_extint(void)
+{
+ __raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
+}
+
+void s3c_pm_restore_core(void)
+{
+ __raw_writel(0, S3C64XX_EINT_MASK);
+
+ s3c_pm_debug_smdkled(1 << 2, 0);
+
+ s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+ s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+ s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+ s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
+}
+
+/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
+ * put the per-cpu code in here until any new cpu comes along and changes
+ * this.
+ */
+
+#include <plat/regs-gpio.h>
+
+static void s3c64xx_cpu_suspend(void)
+{
+ unsigned long tmp;
+
+ /* set our standby method to sleep */
+
+ tmp = __raw_readl(S3C64XX_PWR_CFG);
+ tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
+ tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
+ __raw_writel(tmp, S3C64XX_PWR_CFG);
+
+ /* clear any old wakeup */
+
+ __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
+ S3C64XX_WAKEUP_STAT);
+
+ /* set the LED state to 0110 over sleep */
+ s3c_pm_debug_smdkled(3 << 1, 0xf);
+
+ /* issue the standby signal into the pm unit. Note, we
+ * issue a write-buffer drain just in case */
+
+ tmp = 0;
+
+ asm("b 1f\n\t"
+ ".align 5\n\t"
+ "1:\n\t"
+ "mcr p15, 0, %0, c7, c10, 5\n\t"
+ "mcr p15, 0, %0, c7, c10, 4\n\t"
+ "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
+
+ /* we should never get past here */
+
+ panic("sleep resumed to originator?");
+}
+
+static void s3c64xx_pm_prepare(void)
+{
+ /* store address of resume. */
+ __raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
+
+ /* ensure previous wakeup state is cleared before sleeping */
+ __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
+}
+
+static int s3c64xx_pm_init(void)
+{
+ pm_cpu_prep = s3c64xx_pm_prepare;
+ pm_cpu_sleep = s3c64xx_cpu_suspend;
+ pm_uart_udivslot = 1;
+ return 0;
+}
+
+arch_initcall(s3c64xx_pm_init);
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 05b1752..1debc1f 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -133,6 +133,65 @@ static struct clksrc_clk clk_mout_mpll = {
.sources = &clk_src_mpll,
};
+static unsigned int armclk_mask;
+
+static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ u32 clkdiv;
+
+ /* divisor mask starts at bit0, so no need to shift */
+ clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
+
+ return rate / (clkdiv + 1);
+}
+
+static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent = clk_get_rate(clk->parent);
+ u32 div;
+
+ if (parent < rate)
+ return rate;
+
+ div = (parent / rate) - 1;
+ if (div > armclk_mask)
+ div = armclk_mask;
+
+ return parent / (div + 1);
+}
+
+static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent = clk_get_rate(clk->parent);
+ u32 div;
+ u32 val;
+
+ if (rate < parent / (armclk_mask + 1))
+ return -EINVAL;
+
+ rate = clk_round_rate(clk, rate);
+ div = clk_get_rate(clk->parent) / rate;
+
+ val = __raw_readl(S3C_CLK_DIV0);
+ val &= armclk_mask;
+ val |= (div - 1);
+ __raw_writel(val, S3C_CLK_DIV0);
+
+ return 0;
+
+}
+
+static struct clk clk_arm = {
+ .name = "armclk",
+ .id = -1,
+ .parent = &clk_mout_apll.clk,
+ .get_rate = s3c64xx_clk_arm_get_rate,
+ .set_rate = s3c64xx_clk_arm_set_rate,
+ .round_rate = s3c64xx_clk_arm_round_rate,
+};
+
static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
@@ -520,6 +579,33 @@ static struct clksrc_clk clk_irda = {
.reg_divider = S3C_CLK_DIV2,
};
+static struct clk *clkset_camif_list[] = {
+ &clk_h2,
+};
+
+static struct clk_sources clkset_camif = {
+ .sources = clkset_camif_list,
+ .nr_sources = ARRAY_SIZE(clkset_camif_list),
+};
+
+static struct clksrc_clk clk_camif = {
+ .clk = {
+ .name = "camera",
+ .id = -1,
+ .ctrlbit = S3C_CLKCON_SCLK_CAM,
+ .enable = s3c64xx_sclk_ctrl,
+ .set_parent = s3c64xx_setparent_clksrc,
+ .get_rate = s3c64xx_getrate_clksrc,
+ .set_rate = s3c64xx_setrate_clksrc,
+ .round_rate = s3c64xx_roundrate_clksrc,
+ },
+ .shift = 0,
+ .mask = 0,
+ .sources = &clkset_camif,
+ .divider_shift = S3C6400_CLKDIV0_CAM_SHIFT,
+ .reg_divider = S3C_CLK_DIV0,
+};
+
/* Clock initialisation code */
static struct clksrc_clk *init_parents[] = {
@@ -536,6 +622,7 @@ static struct clksrc_clk *init_parents[] = {
&clk_audio0,
&clk_audio1,
&clk_irda,
+ &clk_camif,
};
static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
@@ -608,6 +695,7 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
clk_fout_epll.rate = epll;
clk_fout_apll.rate = apll;
+ clk_h2.rate = hclk2;
clk_h.rate = hclk;
clk_p.rate = pclk;
clk_f.rate = fclk;
@@ -635,14 +723,30 @@ static struct clk *clks[] __initdata = {
&clk_audio0.clk,
&clk_audio1.clk,
&clk_irda.clk,
+ &clk_camif.clk,
+ &clk_arm,
};
-void __init s3c6400_register_clocks(void)
+/**
+ * s3c6400_register_clocks - register clocks for s3c6400 and above
+ * @armclk_divlimit: Divisor mask for ARMCLK
+ *
+ * Register the clocks for the S3C6400 and above SoC range, such
+ * as ARMCLK and the clocks which have divider chains attached.
+ *
+ * This call does not setup the clocks, which is left to the
+ * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * or resume code to re-set the clocks if the bootloader has changed
+ * them.
+ */
+void __init s3c6400_register_clocks(unsigned armclk_divlimit)
{
struct clk *clkp;
int ret;
int ptr;
+ armclk_mask = armclk_divlimit;
+
for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
clkp = clks[ptr];
ret = s3c24xx_register_clock(clkp);
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
new file mode 100644
index 0000000..5417123
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
@@ -0,0 +1,55 @@
+/* linux/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ unsigned int gpio;
+ unsigned int end;
+
+ end = S3C64XX_GPG(2 + width);
+
+ /* Set all the necessary GPG pins to special-function 0 */
+ for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+}
+
+void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ unsigned int gpio;
+ unsigned int end;
+
+ end = S3C64XX_GPH(2 + width);
+
+ /* Set all the necessary GPG pins to special-function 0 */
+ for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/plat-s3c64xx/sleep.S b/arch/arm/plat-s3c64xx/sleep.S
new file mode 100644
index 0000000..8e71fe9
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/sleep.S
@@ -0,0 +1,144 @@
+/* linux/0arch/arm/plat-s3c64xx/sleep.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU sleep code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/map.h>
+
+#undef S3C64XX_VA_GPIO
+#define S3C64XX_VA_GPIO (0x0)
+
+#include <plat/regs-gpio.h>
+#include <plat/gpio-bank-n.h>
+
+#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
+
+ .text
+
+ /* s3c_cpu_save
+ *
+ * Save enough processor state to allow the restart of the pm.c
+ * code after resume.
+ *
+ * entry:
+ * r0 = pointer to the save block
+ */
+
+ENTRY(s3c_cpu_save)
+ stmfd sp!, { r4 - r12, lr }
+
+ mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mrc p15, 0, r5, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
+ mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
+ mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control
+ mrc p15, 0, r9, c1, c0, 0 @ Control register
+ mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+ mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls
+
+ stmia r0, { r4 - r13 } @ Save CP registers and SP
+
+ @@ save our state to ram
+ bl s3c_pm_cb_flushcache
+
+ @@ call final suspend code
+ ldr r0, =pm_cpu_sleep
+ ldr pc, [r0]
+
+ @@ return to the caller, after the MMU is turned on.
+ @@ restore the last bits of the stack and return.
+resume_with_mmu:
+ ldmfd sp!, { r4 - r12, pc } @ return, from sp from s3c_cpu_save
+
+ .data
+
+ /* the next bit is code, but it requires easy access to the
+ * s3c_sleep_save_phys data before the MMU is switched on, so
+ * we store the code that needs this variable in the .data where
+ * the value can be written to (the .text segment is RO).
+ */
+
+ .global s3c_sleep_save_phys
+s3c_sleep_save_phys:
+ .word 0
+
+ /* Sleep magic, the word before the resume entry point so that the
+ * bootloader can check for a resumeable image. */
+
+ .word 0x2bedf00d
+
+ /* s3c_cpu_reusme
+ *
+ * This is the entry point, stored by whatever method the bootloader
+ * requires to get the kernel runnign again. This code expects to be
+ * entered with no caches live and the MMU disabled. It will then
+ * restore the MMU and other basic CP registers saved and restart
+ * the kernel C code to finish the resume code.
+ */
+
+ENTRY(s3c_cpu_resume)
+ msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+ ldr r2, =LL_UART /* for debug */
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+ /* Initialise the GPIO state if we are debugging via the SMDK LEDs,
+ * as the uboot version supplied resets these to inputs during the
+ * resume checks.
+ */
+
+ ldr r3, =S3C64XX_PA_GPIO
+ ldr r0, [ r3, #S3C64XX_GPNCON ]
+ bic r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
+ S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
+ orr r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
+ S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
+ str r0, [ r3, #S3C64XX_GPNCON ]
+
+ ldr r0, [ r3, #S3C64XX_GPNDAT ]
+ bic r0, r0, #0xf << 12 @ GPN12..15
+ orr r0, r0, #1 << 15 @ GPN15
+ str r0, [ r3, #S3C64XX_GPNDAT ]
+#endif
+
+ /* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
+ * are thoroughly cleaned just in case the bootloader didn't do it
+ * for us. */
+ mov r0, #0
+ mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ @@mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
+ @@mcr p15, 0, r0, c7, c7, 0 @ Invalidate I + D caches
+
+ ldr r0, s3c_sleep_save_phys
+ ldmia r0, { r4 - r13 }
+
+ mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mcr p15, 0, r5, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
+ mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
+ mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control
+ mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+
+ mov r0, #0 @ restore copro access controls
+ mcr p15, 0, r11, c1, c0, 2 @ Co-processor access controls
+ mcr p15, 0, r0, c7, c5, 4
+
+ ldr r2, =resume_with_mmu
+ mcr p15, 0, r9, c1, c0, 0 /* turn mmu back on */
+ nop
+ mov pc, r2 /* jump back */
+
+ .end
diff --git a/arch/arm/plat-stmp3xxx/Kconfig b/arch/arm/plat-stmp3xxx/Kconfig
new file mode 100644
index 0000000..2cf37c3
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/Kconfig
@@ -0,0 +1,37 @@
+if ARCH_STMP3XXX
+
+menu "Freescale STMP3xxx implementations"
+
+choice
+ prompt "Select STMP3xxx chip family"
+
+config ARCH_STMP37XX
+ bool "Freescale SMTP37xx"
+ select CPU_ARM926T
+ ---help---
+ STMP37xx refers to 3700 through 3769 chips
+
+config ARCH_STMP378X
+ bool "Freescale STMP378x"
+ select CPU_ARM926T
+ ---help---
+ STMP378x refers to 3780 through 3789 chips
+
+endchoice
+
+choice
+ prompt "Select STMP3xxx board type"
+
+config MACH_STMP37XX
+ depends on ARCH_STMP37XX
+ bool "Freescale STMP37xx development board"
+
+config MACH_STMP378X
+ depends on ARCH_STMP378X
+ bool "Freescale STMP378x development board"
+
+endchoice
+
+endmenu
+
+endif
diff --git a/arch/arm/plat-stmp3xxx/Makefile b/arch/arm/plat-stmp3xxx/Makefile
new file mode 100644
index 0000000..31dd518
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the linux kernel.
+#
+# Object file lists.
+obj-y += core.o timer.o irq.o dma.o clock.o pinmux.o devices.o
diff --git a/arch/arm/plat-stmp3xxx/clock.c b/arch/arm/plat-stmp3xxx/clock.c
new file mode 100644
index 0000000..5d2f19a
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/clock.c
@@ -0,0 +1,1135 @@
+/*
+ * Clock manipulation routines for Freescale STMP37XX/STMP378X
+ *
+ * Author: Vitaly Wool <vital@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#define DEBUG
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+#include <asm/clkdev.h>
+#include <mach/platform.h>
+#include <mach/regs-clkctrl.h>
+
+#include "clock.h"
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+static struct clk osc_24M;
+static struct clk pll_clk;
+static struct clk cpu_clk;
+static struct clk hclk;
+
+static int propagate_rate(struct clk *);
+
+static inline int clk_is_busy(struct clk *clk)
+{
+ return __raw_readl(clk->busy_reg) & (1 << clk->busy_bit);
+}
+
+static inline int clk_good(struct clk *clk)
+{
+ return clk && !IS_ERR(clk) && clk->ops;
+}
+
+static int std_clk_enable(struct clk *clk)
+{
+ if (clk->enable_reg) {
+ u32 clk_reg = __raw_readl(clk->enable_reg);
+ if (clk->enable_negate)
+ clk_reg &= ~(1 << clk->enable_shift);
+ else
+ clk_reg |= (1 << clk->enable_shift);
+ __raw_writel(clk_reg, clk->enable_reg);
+ if (clk->enable_wait)
+ udelay(clk->enable_wait);
+ return 0;
+ } else
+ return -EINVAL;
+}
+
+static int std_clk_disable(struct clk *clk)
+{
+ if (clk->enable_reg) {
+ u32 clk_reg = __raw_readl(clk->enable_reg);
+ if (clk->enable_negate)
+ clk_reg |= (1 << clk->enable_shift);
+ else
+ clk_reg &= ~(1 << clk->enable_shift);
+ __raw_writel(clk_reg, clk->enable_reg);
+ return 0;
+ } else
+ return -EINVAL;
+}
+
+static int io_set_rate(struct clk *clk, u32 rate)
+{
+ u32 reg_frac, clkctrl_frac;
+ int i, ret = 0, mask = 0x1f;
+
+ clkctrl_frac = (clk->parent->rate * 18 + rate - 1) / rate;
+
+ if (clkctrl_frac < 18 || clkctrl_frac > 35) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ reg_frac = __raw_readl(clk->scale_reg);
+ reg_frac &= ~(mask << clk->scale_shift);
+ __raw_writel(reg_frac | (clkctrl_frac << clk->scale_shift),
+ clk->scale_reg);
+ if (clk->busy_reg) {
+ for (i = 10000; i; i--)
+ if (!clk_is_busy(clk))
+ break;
+ if (!i)
+ ret = -ETIMEDOUT;
+ else
+ ret = 0;
+ }
+out:
+ return ret;
+}
+
+static long io_get_rate(struct clk *clk)
+{
+ long rate = clk->parent->rate * 18;
+ int mask = 0x1f;
+
+ rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
+ clk->rate = rate;
+
+ return rate;
+}
+
+static long per_get_rate(struct clk *clk)
+{
+ long rate = clk->parent->rate;
+ long div;
+ const int mask = 0xff;
+
+ if (clk->enable_reg &&
+ !(__raw_readl(clk->enable_reg) & clk->enable_shift))
+ clk->rate = 0;
+ else {
+ div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
+ if (div)
+ rate /= div;
+ clk->rate = rate;
+ }
+
+ return clk->rate;
+}
+
+static int per_set_rate(struct clk *clk, u32 rate)
+{
+ int ret = -EINVAL;
+ int div = (clk->parent->rate + rate - 1) / rate;
+ u32 reg_frac;
+ const int mask = 0xff;
+ int try = 10;
+ int i = -1;
+
+ if (div == 0 || div > mask)
+ goto out;
+
+ reg_frac = __raw_readl(clk->scale_reg);
+ reg_frac &= ~(mask << clk->scale_shift);
+
+ while (try--) {
+ __raw_writel(reg_frac | (div << clk->scale_shift),
+ clk->scale_reg);
+
+ if (clk->busy_reg) {
+ for (i = 10000; i; i--)
+ if (!clk_is_busy(clk))
+ break;
+ }
+ if (i)
+ break;
+ }
+
+ if (!i)
+ ret = -ETIMEDOUT;
+ else
+ ret = 0;
+
+out:
+ if (ret != 0)
+ printk(KERN_ERR "%s: error %d\n", __func__, ret);
+ return ret;
+}
+
+static long lcdif_get_rate(struct clk *clk)
+{
+ long rate = clk->parent->rate;
+ long div;
+ const int mask = 0xff;
+
+ div = (__raw_readl(clk->scale_reg) >> clk->scale_shift) & mask;
+ if (div) {
+ rate /= div;
+ div = (__raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC) &
+ BM_CLKCTRL_FRAC_PIXFRAC) >> BP_CLKCTRL_FRAC_PIXFRAC;
+ rate /= div;
+ }
+ clk->rate = rate;
+
+ return rate;
+}
+
+static int lcdif_set_rate(struct clk *clk, u32 rate)
+{
+ int ret = 0;
+ /*
+ * On 3700, we can get most timings exact by modifying ref_pix
+ * and the divider, but keeping the phase timings at 1 (2
+ * phases per cycle).
+ *
+ * ref_pix can be between 480e6*18/35=246.9MHz and 480e6*18/18=480MHz,
+ * which is between 18/(18*480e6)=2.084ns and 35/(18*480e6)=4.050ns.
+ *
+ * ns_cycle >= 2*18e3/(18*480) = 25/6
+ * ns_cycle <= 2*35e3/(18*480) = 875/108
+ *
+ * Multiply the ns_cycle by 'div' to lengthen it until it fits the
+ * bounds. This is the divider we'll use after ref_pix.
+ *
+ * 6 * ns_cycle >= 25 * div
+ * 108 * ns_cycle <= 875 * div
+ */
+ u32 ns_cycle = 1000000 / rate;
+ u32 div, reg_val;
+ u32 lowest_result = (u32) -1;
+ u32 lowest_div = 0, lowest_fracdiv = 0;
+
+ for (div = 1; div < 256; ++div) {
+ u32 fracdiv;
+ u32 ps_result;
+ int lower_bound = 6 * ns_cycle >= 25 * div;
+ int upper_bound = 108 * ns_cycle <= 875 * div;
+ if (!lower_bound)
+ break;
+ if (!upper_bound)
+ continue;
+ /*
+ * Found a matching div. Calculate fractional divider needed,
+ * rounded up.
+ */
+ fracdiv = ((clk->parent->rate / 1000 * 18 / 2) *
+ ns_cycle + 1000 * div - 1) /
+ (1000 * div);
+ if (fracdiv < 18 || fracdiv > 35) {
+ ret = -EINVAL;
+ goto out;
+ }
+ /* Calculate the actual cycle time this results in */
+ ps_result = 6250 * div * fracdiv / 27;
+
+ /* Use the fastest result that doesn't break ns_cycle */
+ if (ps_result <= lowest_result) {
+ lowest_result = ps_result;
+ lowest_div = div;
+ lowest_fracdiv = fracdiv;
+ }
+ }
+
+ if (div >= 256 || lowest_result == (u32) -1) {
+ ret = -EINVAL;
+ goto out;
+ }
+ pr_debug("Programming PFD=%u,DIV=%u ref_pix=%uMHz "
+ "PIXCLK=%uMHz cycle=%u.%03uns\n",
+ lowest_fracdiv, lowest_div,
+ 480*18/lowest_fracdiv, 480*18/lowest_fracdiv/lowest_div,
+ lowest_result / 1000, lowest_result % 1000);
+
+ /* Program ref_pix phase fractional divider */
+ reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
+ reg_val &= ~BM_CLKCTRL_FRAC_PIXFRAC;
+ reg_val |= BF(lowest_fracdiv, CLKCTRL_FRAC_PIXFRAC);
+ __raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
+
+ /* Ungate PFD */
+ stmp3xxx_clearl(BM_CLKCTRL_FRAC_CLKGATEPIX,
+ REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC);
+
+ /* Program pix divider */
+ reg_val = __raw_readl(clk->scale_reg);
+ reg_val &= ~(BM_CLKCTRL_PIX_DIV | BM_CLKCTRL_PIX_CLKGATE);
+ reg_val |= BF(lowest_div, CLKCTRL_PIX_DIV);
+ __raw_writel(reg_val, clk->scale_reg);
+
+ /* Wait for divider update */
+ if (clk->busy_reg) {
+ int i;
+ for (i = 10000; i; i--)
+ if (!clk_is_busy(clk))
+ break;
+ if (!i) {
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+ }
+
+ /* Switch to ref_pix source */
+ reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ);
+ reg_val &= ~BM_CLKCTRL_CLKSEQ_BYPASS_PIX;
+ __raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ);
+
+out:
+ return ret;
+}
+
+
+static int cpu_set_rate(struct clk *clk, u32 rate)
+{
+ u32 reg_val;
+
+ if (rate < 24000)
+ return -EINVAL;
+ else if (rate == 24000) {
+ /* switch to the 24M source */
+ clk_set_parent(clk, &osc_24M);
+ } else {
+ int i;
+ u32 clkctrl_cpu = 1;
+ u32 c = clkctrl_cpu;
+ u32 clkctrl_frac = 1;
+ u32 val;
+ for ( ; c < 0x40; c++) {
+ u32 f = (pll_clk.rate*18/c + rate/2) / rate;
+ int s1, s2;
+
+ if (f < 18 || f > 35)
+ continue;
+ s1 = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu - rate;
+ s2 = pll_clk.rate*18/c/f - rate;
+ pr_debug("%s: s1 %d, s2 %d\n", __func__, s1, s2);
+ if (abs(s1) > abs(s2)) {
+ clkctrl_cpu = c;
+ clkctrl_frac = f;
+ }
+ if (s2 == 0)
+ break;
+ };
+ pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__,
+ clkctrl_cpu, clkctrl_frac);
+ if (c == 0x40) {
+ int d = pll_clk.rate*18/clkctrl_frac/clkctrl_cpu -
+ rate;
+ if (abs(d) > 100 ||
+ clkctrl_frac < 18 || clkctrl_frac > 35)
+ return -EINVAL;
+ }
+
+ /* 4.6.2 */
+ val = __raw_readl(clk->scale_reg);
+ val &= ~(0x3f << clk->scale_shift);
+ val |= clkctrl_frac;
+ clk_set_parent(clk, &osc_24M);
+ udelay(10);
+ __raw_writel(val, clk->scale_reg);
+ /* ungate */
+ __raw_writel(1<<7, clk->scale_reg + 8);
+ /* write clkctrl_cpu */
+ clk->saved_div = clkctrl_cpu;
+
+ reg_val = __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+ reg_val &= ~0x3F;
+ reg_val |= clkctrl_cpu;
+ __raw_writel(reg_val, REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+
+ for (i = 10000; i; i--)
+ if (!clk_is_busy(clk))
+ break;
+ if (!i) {
+ printk(KERN_ERR "couldn't set up CPU divisor\n");
+ return -ETIMEDOUT;
+ }
+ clk_set_parent(clk, &pll_clk);
+ clk->saved_div = 0;
+ udelay(10);
+ }
+ return 0;
+}
+
+static long cpu_get_rate(struct clk *clk)
+{
+ long rate = clk->parent->rate * 18;
+
+ rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f;
+ rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU) & 0x3f;
+ rate = ((rate + 9) / 10) * 10;
+ clk->rate = rate;
+
+ return rate;
+}
+
+static long cpu_round_rate(struct clk *clk, u32 rate)
+{
+ unsigned long r = 0;
+
+ if (rate <= 24000)
+ r = 24000;
+ else {
+ u32 clkctrl_cpu = 1;
+ u32 clkctrl_frac;
+ do {
+ clkctrl_frac =
+ (pll_clk.rate*18 / clkctrl_cpu + rate/2) / rate;
+ if (clkctrl_frac > 35)
+ continue;
+ if (pll_clk.rate*18 / clkctrl_frac / clkctrl_cpu/10 ==
+ rate / 10)
+ break;
+ } while (pll_clk.rate / 2 >= clkctrl_cpu++ * rate);
+ if (pll_clk.rate / 2 < (clkctrl_cpu - 1) * rate)
+ clkctrl_cpu--;
+ pr_debug("%s: clkctrl_cpu %d, clkctrl_frac %d\n", __func__,
+ clkctrl_cpu, clkctrl_frac);
+ if (clkctrl_frac < 18)
+ clkctrl_frac = 18;
+ if (clkctrl_frac > 35)
+ clkctrl_frac = 35;
+
+ r = pll_clk.rate * 18;
+ r /= clkctrl_frac;
+ r /= clkctrl_cpu;
+ r = 10 * ((r + 9) / 10);
+ }
+ return r;
+}
+
+static long emi_get_rate(struct clk *clk)
+{
+ long rate = clk->parent->rate * 18;
+
+ rate /= (__raw_readl(clk->scale_reg) >> clk->scale_shift) & 0x3f;
+ rate /= __raw_readl(REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI) & 0x3f;
+ clk->rate = rate;
+
+ return rate;
+}
+
+static int clkseq_set_parent(struct clk *clk, struct clk *parent)
+{
+ int ret = -EINVAL;
+ int shift = 8;
+
+ /* bypass? */
+ if (parent == &osc_24M)
+ shift = 4;
+
+ if (clk->bypass_reg) {
+#ifdef CONFIG_ARCH_STMP378X
+ u32 hbus_val, cpu_val;
+
+ if (clk == &cpu_clk && shift == 4) {
+ hbus_val = __raw_readl(REGS_CLKCTRL_BASE +
+ HW_CLKCTRL_HBUS);
+ cpu_val = __raw_readl(REGS_CLKCTRL_BASE +
+ HW_CLKCTRL_CPU);
+
+ hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN |
+ BM_CLKCTRL_HBUS_DIV);
+ clk->saved_div = cpu_val & BM_CLKCTRL_CPU_DIV_CPU;
+ cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU;
+ cpu_val |= 1;
+
+ if (machine_is_stmp378x()) {
+ __raw_writel(hbus_val,
+ REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
+ __raw_writel(cpu_val,
+ REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+ hclk.rate = 0;
+ }
+ } else if (clk == &cpu_clk && shift == 8) {
+ hbus_val = __raw_readl(REGS_CLKCTRL_BASE +
+ HW_CLKCTRL_HBUS);
+ cpu_val = __raw_readl(REGS_CLKCTRL_BASE +
+ HW_CLKCTRL_CPU);
+ hbus_val &= ~(BM_CLKCTRL_HBUS_DIV_FRAC_EN |
+ BM_CLKCTRL_HBUS_DIV);
+ hbus_val |= 2;
+ cpu_val &= ~BM_CLKCTRL_CPU_DIV_CPU;
+ if (clk->saved_div)
+ cpu_val |= clk->saved_div;
+ else
+ cpu_val |= 2;
+
+ if (machine_is_stmp378x()) {
+ __raw_writel(hbus_val,
+ REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
+ __raw_writel(cpu_val,
+ REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU);
+ hclk.rate = 0;
+ }
+ }
+#endif
+ __raw_writel(1 << clk->bypass_shift, clk->bypass_reg + shift);
+
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static int hbus_set_rate(struct clk *clk, u32 rate)
+{
+ u8 div = 0;
+ int is_frac = 0;
+ u32 clkctrl_hbus;
+ struct clk *parent = clk->parent;
+
+ pr_debug("%s: rate %d, parent rate %d\n", __func__, rate,
+ parent->rate);
+
+ if (rate > parent->rate)
+ return -EINVAL;
+
+ if (((parent->rate + rate/2) / rate) * rate != parent->rate &&
+ parent->rate / rate < 32) {
+ pr_debug("%s: switching to fractional mode\n", __func__);
+ is_frac = 1;
+ }
+
+ if (is_frac)
+ div = (32 * rate + parent->rate / 2) / parent->rate;
+ else
+ div = (parent->rate + rate - 1) / rate;
+ pr_debug("%s: div calculated is %d\n", __func__, div);
+ if (!div || div > 0x1f)
+ return -EINVAL;
+
+ clk_set_parent(&cpu_clk, &osc_24M);
+ udelay(10);
+ clkctrl_hbus = __raw_readl(clk->scale_reg);
+ clkctrl_hbus &= ~0x3f;
+ clkctrl_hbus |= div;
+ clkctrl_hbus |= (is_frac << 5);
+
+ __raw_writel(clkctrl_hbus, clk->scale_reg);
+ if (clk->busy_reg) {
+ int i;
+ for (i = 10000; i; i--)
+ if (!clk_is_busy(clk))
+ break;
+ if (!i) {
+ printk(KERN_ERR "couldn't set up CPU divisor\n");
+ return -ETIMEDOUT;
+ }
+ }
+ clk_set_parent(&cpu_clk, &pll_clk);
+ __raw_writel(clkctrl_hbus, clk->scale_reg);
+ udelay(10);
+ return 0;
+}
+
+static long hbus_get_rate(struct clk *clk)
+{
+ long rate = clk->parent->rate;
+
+ if (__raw_readl(clk->scale_reg) & 0x20) {
+ rate *= __raw_readl(clk->scale_reg) & 0x1f;
+ rate /= 32;
+ } else
+ rate /= __raw_readl(clk->scale_reg) & 0x1f;
+ clk->rate = rate;
+
+ return rate;
+}
+
+static int xbus_set_rate(struct clk *clk, u32 rate)
+{
+ u16 div = 0;
+ u32 clkctrl_xbus;
+
+ pr_debug("%s: rate %d, parent rate %d\n", __func__, rate,
+ clk->parent->rate);
+
+ div = (clk->parent->rate + rate - 1) / rate;
+ pr_debug("%s: div calculated is %d\n", __func__, div);
+ if (!div || div > 0x3ff)
+ return -EINVAL;
+
+ clkctrl_xbus = __raw_readl(clk->scale_reg);
+ clkctrl_xbus &= ~0x3ff;
+ clkctrl_xbus |= div;
+ __raw_writel(clkctrl_xbus, clk->scale_reg);
+ if (clk->busy_reg) {
+ int i;
+ for (i = 10000; i; i--)
+ if (!clk_is_busy(clk))
+ break;
+ if (!i) {
+ printk(KERN_ERR "couldn't set up xbus divisor\n");
+ return -ETIMEDOUT;
+ }
+ }
+ return 0;
+}
+
+static long xbus_get_rate(struct clk *clk)
+{
+ long rate = clk->parent->rate;
+
+ rate /= __raw_readl(clk->scale_reg) & 0x3ff;
+ clk->rate = rate;
+
+ return rate;
+}
+
+
+/* Clock ops */
+
+static struct clk_ops std_ops = {
+ .enable = std_clk_enable,
+ .disable = std_clk_disable,
+ .get_rate = per_get_rate,
+ .set_rate = per_set_rate,
+ .set_parent = clkseq_set_parent,
+};
+
+static struct clk_ops min_ops = {
+ .enable = std_clk_enable,
+ .disable = std_clk_disable,
+};
+
+static struct clk_ops cpu_ops = {
+ .enable = std_clk_enable,
+ .disable = std_clk_disable,
+ .get_rate = cpu_get_rate,
+ .set_rate = cpu_set_rate,
+ .round_rate = cpu_round_rate,
+ .set_parent = clkseq_set_parent,
+};
+
+static struct clk_ops io_ops = {
+ .enable = std_clk_enable,
+ .disable = std_clk_disable,
+ .get_rate = io_get_rate,
+ .set_rate = io_set_rate,
+};
+
+static struct clk_ops hbus_ops = {
+ .get_rate = hbus_get_rate,
+ .set_rate = hbus_set_rate,
+};
+
+static struct clk_ops xbus_ops = {
+ .get_rate = xbus_get_rate,
+ .set_rate = xbus_set_rate,
+};
+
+static struct clk_ops lcdif_ops = {
+ .enable = std_clk_enable,
+ .disable = std_clk_disable,
+ .get_rate = lcdif_get_rate,
+ .set_rate = lcdif_set_rate,
+ .set_parent = clkseq_set_parent,
+};
+
+static struct clk_ops emi_ops = {
+ .get_rate = emi_get_rate,
+};
+
+/* List of on-chip clocks */
+
+static struct clk osc_24M = {
+ .flags = FIXED_RATE | ENABLED,
+ .rate = 24000,
+};
+
+static struct clk pll_clk = {
+ .parent = &osc_24M,
+ .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0,
+ .enable_shift = 16,
+ .enable_wait = 10,
+ .flags = FIXED_RATE | ENABLED,
+ .rate = 480000,
+ .ops = &min_ops,
+};
+
+static struct clk cpu_clk = {
+ .parent = &pll_clk,
+ .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+ .scale_shift = 0,
+ .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+ .bypass_shift = 7,
+ .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CPU,
+ .busy_bit = 28,
+ .flags = RATE_PROPAGATES | ENABLED,
+ .ops = &cpu_ops,
+};
+
+static struct clk io_clk = {
+ .parent = &pll_clk,
+ .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+ .enable_shift = 31,
+ .enable_negate = 1,
+ .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+ .scale_shift = 24,
+ .flags = RATE_PROPAGATES | ENABLED,
+ .ops = &io_ops,
+};
+
+static struct clk hclk = {
+ .parent = &cpu_clk,
+ .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS,
+ .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+ .bypass_shift = 7,
+ .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS,
+ .busy_bit = 29,
+ .flags = RATE_PROPAGATES | ENABLED,
+ .ops = &hbus_ops,
+};
+
+static struct clk xclk = {
+ .parent = &osc_24M,
+ .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS,
+ .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XBUS,
+ .busy_bit = 31,
+ .flags = RATE_PROPAGATES | ENABLED,
+ .ops = &xbus_ops,
+};
+
+static struct clk uart_clk = {
+ .parent = &xclk,
+ .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+ .enable_shift = 31,
+ .enable_negate = 1,
+ .flags = ENABLED,
+ .ops = &min_ops,
+};
+
+static struct clk audio_clk = {
+ .parent = &xclk,
+ .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+ .enable_shift = 30,
+ .enable_negate = 1,
+ .ops = &min_ops,
+};
+
+static struct clk pwm_clk = {
+ .parent = &xclk,
+ .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+ .enable_shift = 29,
+ .enable_negate = 1,
+ .ops = &min_ops,
+};
+
+static struct clk dri_clk = {
+ .parent = &xclk,
+ .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+ .enable_shift = 28,
+ .enable_negate = 1,
+ .ops = &min_ops,
+};
+
+static struct clk digctl_clk = {
+ .parent = &xclk,
+ .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+ .enable_shift = 27,
+ .enable_negate = 1,
+ .ops = &min_ops,
+};
+
+static struct clk timer_clk = {
+ .parent = &xclk,
+ .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_XTAL,
+ .enable_shift = 26,
+ .enable_negate = 1,
+ .flags = ENABLED,
+ .ops = &min_ops,
+};
+
+static struct clk lcdif_clk = {
+ .parent = &pll_clk,
+ .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
+ .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
+ .busy_bit = 29,
+ .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PIX,
+ .enable_shift = 31,
+ .enable_negate = 1,
+ .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+ .bypass_shift = 1,
+ .flags = NEEDS_SET_PARENT,
+ .ops = &lcdif_ops,
+};
+
+static struct clk ssp_clk = {
+ .parent = &io_clk,
+ .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
+ .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
+ .busy_bit = 29,
+ .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SSP,
+ .enable_shift = 31,
+ .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+ .bypass_shift = 5,
+ .enable_negate = 1,
+ .flags = NEEDS_SET_PARENT,
+ .ops = &std_ops,
+};
+
+static struct clk gpmi_clk = {
+ .parent = &io_clk,
+ .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
+ .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
+ .busy_bit = 29,
+ .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_GPMI,
+ .enable_shift = 31,
+ .enable_negate = 1,
+ .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+ .bypass_shift = 4,
+ .flags = NEEDS_SET_PARENT,
+ .ops = &std_ops,
+};
+
+static struct clk spdif_clk = {
+ .parent = &pll_clk,
+ .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SPDIF,
+ .enable_shift = 31,
+ .enable_negate = 1,
+ .ops = &min_ops,
+};
+
+static struct clk emi_clk = {
+ .parent = &pll_clk,
+ .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI,
+ .enable_shift = 31,
+ .enable_negate = 1,
+ .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_FRAC,
+ .scale_shift = 8,
+ .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_EMI,
+ .busy_bit = 28,
+ .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+ .bypass_shift = 6,
+ .flags = ENABLED,
+ .ops = &emi_ops,
+};
+
+static struct clk ir_clk = {
+ .parent = &io_clk,
+ .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_IR,
+ .enable_shift = 31,
+ .enable_negate = 1,
+ .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+ .bypass_shift = 3,
+ .ops = &min_ops,
+};
+
+static struct clk saif_clk = {
+ .parent = &pll_clk,
+ .scale_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
+ .busy_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
+ .busy_bit = 29,
+ .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_SAIF,
+ .enable_shift = 31,
+ .enable_negate = 1,
+ .bypass_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ,
+ .bypass_shift = 0,
+ .ops = &std_ops,
+};
+
+static struct clk usb_clk = {
+ .parent = &pll_clk,
+ .enable_reg = REGS_CLKCTRL_BASE + HW_CLKCTRL_PLLCTRL0,
+ .enable_shift = 18,
+ .enable_negate = 1,
+ .ops = &min_ops,
+};
+
+/* list of all the clocks */
+static struct clk_lookup onchip_clks[] = {
+ {
+ .con_id = "osc_24M",
+ .clk = &osc_24M,
+ }, {
+ .con_id = "pll",
+ .clk = &pll_clk,
+ }, {
+ .con_id = "cpu",
+ .clk = &cpu_clk,
+ }, {
+ .con_id = "hclk",
+ .clk = &hclk,
+ }, {
+ .con_id = "xclk",
+ .clk = &xclk,
+ }, {
+ .con_id = "io",
+ .clk = &io_clk,
+ }, {
+ .con_id = "uart",
+ .clk = &uart_clk,
+ }, {
+ .con_id = "audio",
+ .clk = &audio_clk,
+ }, {
+ .con_id = "pwm",
+ .clk = &pwm_clk,
+ }, {
+ .con_id = "dri",
+ .clk = &dri_clk,
+ }, {
+ .con_id = "digctl",
+ .clk = &digctl_clk,
+ }, {
+ .con_id = "timer",
+ .clk = &timer_clk,
+ }, {
+ .con_id = "lcdif",
+ .clk = &lcdif_clk,
+ }, {
+ .con_id = "ssp",
+ .clk = &ssp_clk,
+ }, {
+ .con_id = "gpmi",
+ .clk = &gpmi_clk,
+ }, {
+ .con_id = "spdif",
+ .clk = &spdif_clk,
+ }, {
+ .con_id = "emi",
+ .clk = &emi_clk,
+ }, {
+ .con_id = "ir",
+ .clk = &ir_clk,
+ }, {
+ .con_id = "saif",
+ .clk = &saif_clk,
+ }, {
+ .con_id = "usb",
+ .clk = &usb_clk,
+ },
+};
+
+static int __init propagate_rate(struct clk *clk)
+{
+ struct clk_lookup *cl;
+
+ for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks);
+ cl++) {
+ if (unlikely(!clk_good(cl->clk)))
+ continue;
+ if (cl->clk->parent == clk && cl->clk->ops->get_rate) {
+ cl->clk->ops->get_rate(cl->clk);
+ if (cl->clk->flags & RATE_PROPAGATES)
+ propagate_rate(cl->clk);
+ }
+ }
+
+ return 0;
+}
+
+/* Exported API */
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (unlikely(!clk_good(clk)))
+ return 0;
+
+ if (clk->rate != 0)
+ return clk->rate;
+
+ if (clk->ops->get_rate != NULL)
+ return clk->ops->get_rate(clk);
+
+ return clk_get_rate(clk->parent);
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ if (unlikely(!clk_good(clk)))
+ return 0;
+
+ if (clk->ops->round_rate)
+ return clk->ops->round_rate(clk, rate);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+static inline int close_enough(long rate1, long rate2)
+{
+ return rate1 && !((rate2 - rate1) * 1000 / rate1);
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ int ret = -EINVAL;
+
+ if (unlikely(!clk_good(clk)))
+ goto out;
+
+ if (clk->flags & FIXED_RATE || !clk->ops->set_rate)
+ goto out;
+
+ else if (!close_enough(clk->rate, rate)) {
+ ret = clk->ops->set_rate(clk, rate);
+ if (ret < 0)
+ goto out;
+ clk->rate = rate;
+ if (clk->flags & RATE_PROPAGATES)
+ propagate_rate(clk);
+ } else
+ ret = 0;
+
+out:
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long clocks_flags;
+
+ if (unlikely(!clk_good(clk)))
+ return -EINVAL;
+
+ if (clk->parent)
+ clk_enable(clk->parent);
+
+ spin_lock_irqsave(&clocks_lock, clocks_flags);
+
+ clk->usage++;
+ if (clk->ops && clk->ops->enable)
+ clk->ops->enable(clk);
+
+ spin_unlock_irqrestore(&clocks_lock, clocks_flags);
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void local_clk_disable(struct clk *clk)
+{
+ if (unlikely(!clk_good(clk)))
+ return;
+
+ if (clk->usage == 0 && clk->ops->disable)
+ clk->ops->disable(clk);
+
+ if (clk->parent)
+ local_clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long clocks_flags;
+
+ if (unlikely(!clk_good(clk)))
+ return;
+
+ spin_lock_irqsave(&clocks_lock, clocks_flags);
+
+ if ((--clk->usage) == 0 && clk->ops->disable)
+ clk->ops->disable(clk);
+
+ spin_unlock_irqrestore(&clocks_lock, clocks_flags);
+ if (clk->parent)
+ clk_disable(clk->parent);
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Some additional API */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ int ret = -ENODEV;
+ unsigned long clocks_flags;
+
+ if (unlikely(!clk_good(clk)))
+ goto out;
+
+ if (!clk->ops->set_parent)
+ goto out;
+
+ spin_lock_irqsave(&clocks_lock, clocks_flags);
+
+ ret = clk->ops->set_parent(clk, parent);
+ if (!ret) {
+ /* disable if usage count is 0 */
+ local_clk_disable(parent);
+
+ parent->usage += clk->usage;
+ clk->parent->usage -= clk->usage;
+
+ /* disable if new usage count is 0 */
+ local_clk_disable(clk->parent);
+
+ clk->parent = parent;
+ }
+ spin_unlock_irqrestore(&clocks_lock, clocks_flags);
+
+out:
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ if (unlikely(!clk_good(clk)))
+ return NULL;
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+static int __init clk_init(void)
+{
+ struct clk_lookup *cl;
+ struct clk_ops *ops;
+
+ spin_lock_init(&clocks_lock);
+
+ for (cl = onchip_clks; cl < onchip_clks + ARRAY_SIZE(onchip_clks);
+ cl++) {
+ if (cl->clk->flags & ENABLED)
+ clk_enable(cl->clk);
+ else
+ local_clk_disable(cl->clk);
+
+ ops = cl->clk->ops;
+
+ if ((cl->clk->flags & NEEDS_INITIALIZATION) &&
+ ops && ops->set_rate)
+ ops->set_rate(cl->clk, cl->clk->rate);
+
+ if (cl->clk->flags & FIXED_RATE) {
+ if (cl->clk->flags & RATE_PROPAGATES)
+ propagate_rate(cl->clk);
+ } else {
+ if (ops && ops->get_rate)
+ ops->get_rate(cl->clk);
+ }
+
+ if (cl->clk->flags & NEEDS_SET_PARENT) {
+ if (ops && ops->set_parent)
+ ops->set_parent(cl->clk, cl->clk->parent);
+ }
+
+ clkdev_add(cl);
+ }
+ return 0;
+}
+
+arch_initcall(clk_init);
diff --git a/arch/arm/plat-stmp3xxx/clock.h b/arch/arm/plat-stmp3xxx/clock.h
new file mode 100644
index 0000000..a6611e1
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/clock.h
@@ -0,0 +1,61 @@
+/*
+ * Clock control driver for Freescale STMP37XX/STMP378X - internal header file
+ *
+ * Author: Vitaly Wool <vital@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ARCH_ARM_STMX3XXX_CLOCK_H__
+#define __ARCH_ARM_STMX3XXX_CLOCK_H__
+
+#ifndef __ASSEMBLER__
+
+struct clk_ops {
+ int (*enable) (struct clk *);
+ int (*disable) (struct clk *);
+ long (*get_rate) (struct clk *);
+ long (*round_rate) (struct clk *, u32);
+ int (*set_rate) (struct clk *, u32);
+ int (*set_parent) (struct clk *, struct clk *);
+};
+
+struct clk {
+ struct clk *parent;
+ u32 rate;
+ u32 flags;
+ u8 scale_shift;
+ u8 enable_shift;
+ u8 bypass_shift;
+ u8 busy_bit;
+ s8 usage;
+ int enable_wait;
+ int enable_negate;
+ u32 saved_div;
+ void __iomem *enable_reg;
+ void __iomem *scale_reg;
+ void __iomem *bypass_reg;
+ void __iomem *busy_reg;
+ struct clk_ops *ops;
+};
+
+#endif /* __ASSEMBLER__ */
+
+/* Flags */
+#define RATE_PROPAGATES (1<<0)
+#define NEEDS_INITIALIZATION (1<<1)
+#define PARENT_SET_RATE (1<<2)
+#define FIXED_RATE (1<<3)
+#define ENABLED (1<<4)
+#define NEEDS_SET_PARENT (1<<5)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/core.c b/arch/arm/plat-stmp3xxx/core.c
new file mode 100644
index 0000000..37b8a09
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/core.c
@@ -0,0 +1,128 @@
+/*
+ * Freescale STMP37XX/STMP378X core routines
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/platform.h>
+#include <mach/dma.h>
+#include <mach/regs-clkctrl.h>
+
+static int __stmp3xxx_reset_block(void __iomem *hwreg, int just_enable)
+{
+ u32 c;
+ int timeout;
+
+ /* the process of software reset of IP block is done
+ in several steps:
+
+ - clear SFTRST and wait for block is enabled;
+ - clear clock gating (CLKGATE bit);
+ - set the SFTRST again and wait for block is in reset;
+ - clear SFTRST and wait for reset completion.
+ */
+ c = __raw_readl(hwreg);
+ c &= ~(1<<31); /* clear SFTRST */
+ __raw_writel(c, hwreg);
+ for (timeout = 1000000; timeout > 0; timeout--)
+ /* still in SFTRST state ? */
+ if ((__raw_readl(hwreg) & (1<<31)) == 0)
+ break;
+ if (timeout <= 0) {
+ printk(KERN_ERR"%s(%p): timeout when enabling\n",
+ __func__, hwreg);
+ return -ETIME;
+ }
+
+ c = __raw_readl(hwreg);
+ c &= ~(1<<30); /* clear CLKGATE */
+ __raw_writel(c, hwreg);
+
+ if (!just_enable) {
+ c = __raw_readl(hwreg);
+ c |= (1<<31); /* now again set SFTRST */
+ __raw_writel(c, hwreg);
+ for (timeout = 1000000; timeout > 0; timeout--)
+ /* poll until CLKGATE set */
+ if (__raw_readl(hwreg) & (1<<30))
+ break;
+ if (timeout <= 0) {
+ printk(KERN_ERR"%s(%p): timeout when resetting\n",
+ __func__, hwreg);
+ return -ETIME;
+ }
+
+ c = __raw_readl(hwreg);
+ c &= ~(1<<31); /* clear SFTRST */
+ __raw_writel(c, hwreg);
+ for (timeout = 1000000; timeout > 0; timeout--)
+ /* still in SFTRST state ? */
+ if ((__raw_readl(hwreg) & (1<<31)) == 0)
+ break;
+ if (timeout <= 0) {
+ printk(KERN_ERR"%s(%p): timeout when enabling "
+ "after reset\n", __func__, hwreg);
+ return -ETIME;
+ }
+
+ c = __raw_readl(hwreg);
+ c &= ~(1<<30); /* clear CLKGATE */
+ __raw_writel(c, hwreg);
+ }
+ for (timeout = 1000000; timeout > 0; timeout--)
+ /* still in SFTRST state ? */
+ if ((__raw_readl(hwreg) & (1<<30)) == 0)
+ break;
+
+ if (timeout <= 0) {
+ printk(KERN_ERR"%s(%p): timeout when unclockgating\n",
+ __func__, hwreg);
+ return -ETIME;
+ }
+
+ return 0;
+}
+
+int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable)
+{
+ int try = 10;
+ int r;
+
+ while (try--) {
+ r = __stmp3xxx_reset_block(hwreg, just_enable);
+ if (!r)
+ break;
+ pr_debug("%s: try %d failed\n", __func__, 10 - try);
+ }
+ return r;
+}
+EXPORT_SYMBOL(stmp3xxx_reset_block);
+
+struct platform_device stmp3xxx_dbguart = {
+ .name = "stmp3xxx-dbguart",
+ .id = -1,
+};
+
+void __init stmp3xxx_init(void)
+{
+ /* Turn off auto-slow and other tricks */
+ stmp3xxx_clearl(0x7f00000, REGS_CLKCTRL_BASE + HW_CLKCTRL_HBUS);
+
+ stmp3xxx_dma_init();
+}
diff --git a/arch/arm/plat-stmp3xxx/devices.c b/arch/arm/plat-stmp3xxx/devices.c
new file mode 100644
index 0000000..68fed4b
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/devices.c
@@ -0,0 +1,389 @@
+/*
+* Freescale STMP37XX/STMP378X platform devices
+*
+* Embedded Alley Solutions, Inc <source@embeddedalley.com>
+*
+* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+*/
+
+/*
+* The code contained herein is licensed under the GNU General Public
+* License. You may obtain a copy of the GNU General Public License
+* Version 2 or later at the following locations:
+*
+* http://www.opensource.org/licenses/gpl-license.html
+* http://www.gnu.org/copyleft/gpl.html
+*/
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/platform.h>
+#include <mach/stmp3xxx.h>
+#include <mach/regs-lcdif.h>
+#include <mach/regs-uartapp.h>
+#include <mach/regs-gpmi.h>
+#include <mach/regs-usbctrl.h>
+#include <mach/regs-ssp.h>
+#include <mach/regs-rtc.h>
+
+static u64 common_dmamask = DMA_BIT_MASK(32);
+
+static struct resource appuart_resources[] = {
+ {
+ .start = IRQ_UARTAPP_INTERNAL,
+ .end = IRQ_UARTAPP_INTERNAL,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = IRQ_UARTAPP_RX_DMA,
+ .end = IRQ_UARTAPP_RX_DMA,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = IRQ_UARTAPP_TX_DMA,
+ .end = IRQ_UARTAPP_TX_DMA,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = REGS_UARTAPP1_PHYS,
+ .end = REGS_UARTAPP1_PHYS + REGS_UARTAPP_SIZE,
+ .flags = IORESOURCE_MEM,
+ }, {
+ /* Rx DMA channel */
+ .start = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX),
+ .end = STMP3XXX_DMA(6, STMP3XXX_BUS_APBX),
+ .flags = IORESOURCE_DMA,
+ }, {
+ /* Tx DMA channel */
+ .start = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX),
+ .end = STMP3XXX_DMA(7, STMP3XXX_BUS_APBX),
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device stmp3xxx_appuart = {
+ .name = "stmp3xxx-appuart",
+ .id = 0,
+ .resource = appuart_resources,
+ .num_resources = ARRAY_SIZE(appuart_resources),
+ .dev = {
+ .dma_mask = &common_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct platform_device stmp3xxx_watchdog = {
+ .name = "stmp3xxx_wdt",
+ .id = -1,
+};
+
+static struct resource ts_resource[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_TOUCH_DETECT,
+ .end = IRQ_TOUCH_DETECT,
+ }, {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_LRADC_CH5,
+ .end = IRQ_LRADC_CH5,
+ },
+};
+
+struct platform_device stmp3xxx_touchscreen = {
+ .name = "stmp3xxx_ts",
+ .id = -1,
+ .resource = ts_resource,
+ .num_resources = ARRAY_SIZE(ts_resource),
+};
+
+/*
+* Keypad device
+*/
+struct platform_device stmp3xxx_keyboard = {
+ .name = "stmp3xxx-keyboard",
+ .id = -1,
+};
+
+static struct resource gpmi_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = REGS_GPMI_PHYS,
+ .end = REGS_GPMI_PHYS + REGS_GPMI_SIZE,
+ }, {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_GPMI_DMA,
+ .end = IRQ_GPMI_DMA,
+ }, {
+ .flags = IORESOURCE_DMA,
+ .start = STMP3XXX_DMA(4, STMP3XXX_BUS_APBH),
+ .end = STMP3XXX_DMA(8, STMP3XXX_BUS_APBH),
+ },
+};
+
+struct platform_device stmp3xxx_gpmi = {
+ .name = "gpmi",
+ .id = -1,
+ .dev = {
+ .dma_mask = &common_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = gpmi_resources,
+ .num_resources = ARRAY_SIZE(gpmi_resources),
+};
+
+static struct resource mmc1_resource[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = REGS_SSP1_PHYS,
+ .end = REGS_SSP1_PHYS + REGS_SSP_SIZE,
+ }, {
+ .flags = IORESOURCE_DMA,
+ .start = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+ .end = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+ }, {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_SSP1_DMA,
+ .end = IRQ_SSP1_DMA,
+ }, {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_SSP_ERROR,
+ .end = IRQ_SSP_ERROR,
+ },
+};
+
+struct platform_device stmp3xxx_mmc = {
+ .name = "stmp3xxx-mmc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &common_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = mmc1_resource,
+ .num_resources = ARRAY_SIZE(mmc1_resource),
+};
+
+static struct resource usb_resources[] = {
+ {
+ .start = REGS_USBCTRL_PHYS,
+ .end = REGS_USBCTRL_PHYS + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_USB_CTRL,
+ .end = IRQ_USB_CTRL,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device stmp3xxx_udc = {
+ .name = "fsl-usb2-udc",
+ .id = -1,
+ .dev = {
+ .dma_mask = &common_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = usb_resources,
+ .num_resources = ARRAY_SIZE(usb_resources),
+};
+
+struct platform_device stmp3xxx_ehci = {
+ .name = "fsl-ehci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &common_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = usb_resources,
+ .num_resources = ARRAY_SIZE(usb_resources),
+};
+
+static struct resource rtc_resources[] = {
+ {
+ .start = REGS_RTC_PHYS,
+ .end = REGS_RTC_PHYS + REGS_RTC_SIZE,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_RTC_ALARM,
+ .end = IRQ_RTC_ALARM,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = IRQ_RTC_1MSEC,
+ .end = IRQ_RTC_1MSEC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device stmp3xxx_rtc = {
+ .name = "stmp3xxx-rtc",
+ .id = -1,
+ .resource = rtc_resources,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+};
+
+static struct resource ssp1_resources[] = {
+ {
+ .start = REGS_SSP1_PHYS,
+ .end = REGS_SSP1_PHYS + REGS_SSP_SIZE,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_SSP1_DMA,
+ .end = IRQ_SSP1_DMA,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+ .end = STMP3XXX_DMA(1, STMP3XXX_BUS_APBH),
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct resource ssp2_resources[] = {
+ {
+ .start = REGS_SSP2_PHYS,
+ .end = REGS_SSP2_PHYS + REGS_SSP_SIZE,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_SSP2_DMA,
+ .end = IRQ_SSP2_DMA,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = STMP3XXX_DMA(2, STMP3XXX_BUS_APBH),
+ .end = STMP3XXX_DMA(2, STMP3XXX_BUS_APBH),
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device stmp3xxx_spi1 = {
+ .name = "stmp3xxx_ssp",
+ .id = 1,
+ .dev = {
+ .dma_mask = &common_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssp1_resources,
+ .num_resources = ARRAY_SIZE(ssp1_resources),
+};
+
+struct platform_device stmp3xxx_spi2 = {
+ .name = "stmp3xxx_ssp",
+ .id = 2,
+ .dev = {
+ .dma_mask = &common_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssp2_resources,
+ .num_resources = ARRAY_SIZE(ssp2_resources),
+};
+
+static struct resource fb_resource[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_LCDIF_DMA,
+ .end = IRQ_LCDIF_DMA,
+ }, {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_LCDIF_ERROR,
+ .end = IRQ_LCDIF_ERROR,
+ }, {
+ .flags = IORESOURCE_MEM,
+ .start = REGS_LCDIF_PHYS,
+ .end = REGS_LCDIF_PHYS + REGS_LCDIF_SIZE,
+ },
+};
+
+struct platform_device stmp3xxx_framebuffer = {
+ .name = "stmp3xxx-fb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &common_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(fb_resource),
+ .resource = fb_resource,
+};
+
+#define CMDLINE_DEVICE_CHOOSE(name, dev1, dev2) \
+ static char *cmdline_device_##name; \
+ static int cmdline_device_##name##_setup(char *dev) \
+ { \
+ cmdline_device_##name = dev + 1; \
+ return 0; \
+ } \
+ __setup(#name, cmdline_device_##name##_setup); \
+ int stmp3xxx_##name##_device_register(void) \
+ { \
+ struct platform_device *d = NULL; \
+ if (!cmdline_device_##name || \
+ !strcmp(cmdline_device_##name, #dev1)) \
+ d = &stmp3xxx_##dev1; \
+ else if (!strcmp(cmdline_device_##name, #dev2)) \
+ d = &stmp3xxx_##dev2; \
+ else \
+ printk(KERN_ERR"Unknown %s assignment '%s'.\n", \
+ #name, cmdline_device_##name); \
+ return d ? platform_device_register(d) : -ENOENT; \
+ }
+
+CMDLINE_DEVICE_CHOOSE(ssp1, mmc, spi1)
+CMDLINE_DEVICE_CHOOSE(ssp2, gpmi, spi2)
+
+struct platform_device stmp3xxx_backlight = {
+ .name = "stmp3xxx-bl",
+ .id = -1,
+};
+
+struct platform_device stmp3xxx_rotdec = {
+ .name = "stmp3xxx-rotdec",
+ .id = -1,
+};
+
+struct platform_device stmp3xxx_persistent = {
+ .name = "stmp3xxx-persistent",
+ .id = -1,
+};
+
+struct platform_device stmp3xxx_dcp_bootstream = {
+ .name = "stmp3xxx-dcpboot",
+ .id = -1,
+ .dev = {
+ .dma_mask = &common_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static struct resource dcp_resources[] = {
+ {
+ .start = IRQ_DCP_VMI,
+ .end = IRQ_DCP_VMI,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = IRQ_DCP,
+ .end = IRQ_DCP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device stmp3xxx_dcp = {
+ .name = "stmp3xxx-dcp",
+ .id = -1,
+ .resource = dcp_resources,
+ .num_resources = ARRAY_SIZE(dcp_resources),
+ .dev = {
+ .dma_mask = &common_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static struct resource battery_resource[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_VDD5V,
+ .end = IRQ_VDD5V,
+ },
+};
+
+struct platform_device stmp3xxx_battery = {
+ .name = "stmp3xxx-battery",
+ .resource = battery_resource,
+ .num_resources = ARRAY_SIZE(battery_resource),
+};
diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c
new file mode 100644
index 0000000..d2f4977
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/dma.c
@@ -0,0 +1,463 @@
+/*
+ * DMA helper routines for Freescale STMP37XX/STMP378X
+ *
+ * Author: dmitry pervushin <dpervushin@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/sysdev.h>
+#include <linux/cpufreq.h>
+
+#include <asm/page.h>
+
+#include <mach/platform.h>
+#include <mach/dma.h>
+#include <mach/regs-apbx.h>
+#include <mach/regs-apbh.h>
+
+static const size_t pool_item_size = sizeof(struct stmp3xxx_dma_command);
+static const size_t pool_alignment = 8;
+static struct stmp3xxx_dma_user {
+ void *pool;
+ int inuse;
+ const char *name;
+} channels[MAX_DMA_CHANNELS];
+
+#define IS_VALID_CHANNEL(ch) ((ch) >= 0 && (ch) < MAX_DMA_CHANNELS)
+#define IS_USED(ch) (channels[ch].inuse)
+
+int stmp3xxx_dma_request(int ch, struct device *dev, const char *name)
+{
+ struct stmp3xxx_dma_user *user;
+ int err = 0;
+
+ user = channels + ch;
+ if (!IS_VALID_CHANNEL(ch)) {
+ err = -ENODEV;
+ goto out;
+ }
+ if (IS_USED(ch)) {
+ err = -EBUSY;
+ goto out;
+ }
+ /* Create a pool to allocate dma commands from */
+ user->pool = dma_pool_create(name, dev, pool_item_size,
+ pool_alignment, PAGE_SIZE);
+ if (user->pool == NULL) {
+ err = -ENOMEM;
+ goto out;
+ }
+ user->name = name;
+ user->inuse++;
+out:
+ return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_request);
+
+int stmp3xxx_dma_release(int ch)
+{
+ struct stmp3xxx_dma_user *user = channels + ch;
+ int err = 0;
+
+ if (!IS_VALID_CHANNEL(ch)) {
+ err = -ENODEV;
+ goto out;
+ }
+ if (!IS_USED(ch)) {
+ err = -EBUSY;
+ goto out;
+ }
+ BUG_ON(user->pool == NULL);
+ dma_pool_destroy(user->pool);
+ user->inuse--;
+out:
+ return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_release);
+
+int stmp3xxx_dma_read_semaphore(int channel)
+{
+ int sem = -1;
+
+ switch (STMP3XXX_DMA_BUS(channel)) {
+ case STMP3XXX_BUS_APBH:
+ sem = __raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA +
+ STMP3XXX_DMA_CHANNEL(channel) * 0x70);
+ sem &= BM_APBH_CHn_SEMA_PHORE;
+ sem >>= BP_APBH_CHn_SEMA_PHORE;
+ break;
+
+ case STMP3XXX_BUS_APBX:
+ sem = __raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA +
+ STMP3XXX_DMA_CHANNEL(channel) * 0x70);
+ sem &= BM_APBX_CHn_SEMA_PHORE;
+ sem >>= BP_APBX_CHn_SEMA_PHORE;
+ break;
+ default:
+ BUG();
+ }
+ return sem;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_read_semaphore);
+
+int stmp3xxx_dma_allocate_command(int channel,
+ struct stmp3xxx_dma_descriptor *descriptor)
+{
+ struct stmp3xxx_dma_user *user = channels + channel;
+ int err = 0;
+
+ if (!IS_VALID_CHANNEL(channel)) {
+ err = -ENODEV;
+ goto out;
+ }
+ if (!IS_USED(channel)) {
+ err = -EBUSY;
+ goto out;
+ }
+ if (descriptor == NULL) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ /* Allocate memory for a command from the buffer */
+ descriptor->command =
+ dma_pool_alloc(user->pool, GFP_KERNEL, &descriptor->handle);
+
+ /* Check it worked */
+ if (!descriptor->command) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ memset(descriptor->command, 0, pool_item_size);
+out:
+ WARN_ON(err);
+ return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_allocate_command);
+
+int stmp3xxx_dma_free_command(int channel,
+ struct stmp3xxx_dma_descriptor *descriptor)
+{
+ int err = 0;
+
+ if (!IS_VALID_CHANNEL(channel)) {
+ err = -ENODEV;
+ goto out;
+ }
+ if (!IS_USED(channel)) {
+ err = -EBUSY;
+ goto out;
+ }
+
+ /* Return the command memory to the pool */
+ dma_pool_free(channels[channel].pool, descriptor->command,
+ descriptor->handle);
+
+ /* Initialise descriptor so we're not tempted to use it */
+ descriptor->command = NULL;
+ descriptor->handle = 0;
+ descriptor->virtual_buf_ptr = NULL;
+ descriptor->next_descr = NULL;
+
+ WARN_ON(err);
+out:
+ return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_free_command);
+
+void stmp3xxx_dma_go(int channel,
+ struct stmp3xxx_dma_descriptor *head, u32 semaphore)
+{
+ int ch = STMP3XXX_DMA_CHANNEL(channel);
+ void __iomem *c, *s;
+
+ switch (STMP3XXX_DMA_BUS(channel)) {
+ case STMP3XXX_BUS_APBH:
+ c = REGS_APBH_BASE + HW_APBH_CHn_NXTCMDAR + 0x70 * ch;
+ s = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * ch;
+ break;
+
+ case STMP3XXX_BUS_APBX:
+ c = REGS_APBX_BASE + HW_APBX_CHn_NXTCMDAR + 0x70 * ch;
+ s = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * ch;
+ break;
+
+ default:
+ return;
+ }
+
+ /* Set next command */
+ __raw_writel(head->handle, c);
+ /* Set counting semaphore (kicks off transfer). Assumes
+ peripheral has been set up correctly */
+ __raw_writel(semaphore, s);
+}
+EXPORT_SYMBOL(stmp3xxx_dma_go);
+
+int stmp3xxx_dma_running(int channel)
+{
+ switch (STMP3XXX_DMA_BUS(channel)) {
+ case STMP3XXX_BUS_APBH:
+ return (__raw_readl(REGS_APBH_BASE + HW_APBH_CHn_SEMA +
+ 0x70 * STMP3XXX_DMA_CHANNEL(channel))) &
+ BM_APBH_CHn_SEMA_PHORE;
+
+ case STMP3XXX_BUS_APBX:
+ return (__raw_readl(REGS_APBX_BASE + HW_APBX_CHn_SEMA +
+ 0x70 * STMP3XXX_DMA_CHANNEL(channel))) &
+ BM_APBX_CHn_SEMA_PHORE;
+ default:
+ BUG();
+ return 0;
+ }
+}
+EXPORT_SYMBOL(stmp3xxx_dma_running);
+
+/*
+ * Circular dma chain management
+ */
+void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain)
+{
+ int i;
+
+ for (i = 0; i < chain->total_count; i++)
+ stmp3xxx_dma_free_command(
+ STMP3XXX_DMA(chain->channel, chain->bus),
+ &chain->chain[i]);
+}
+EXPORT_SYMBOL(stmp3xxx_dma_free_chain);
+
+int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain,
+ struct stmp3xxx_dma_descriptor descriptors[],
+ unsigned items)
+{
+ int i;
+ int err = 0;
+
+ if (items == 0)
+ return err;
+
+ for (i = 0; i < items; i++) {
+ err = stmp3xxx_dma_allocate_command(ch, &descriptors[i]);
+ if (err) {
+ WARN_ON(err);
+ /*
+ * Couldn't allocate the whole chain.
+ * deallocate what has been allocated
+ */
+ if (i) {
+ do {
+ stmp3xxx_dma_free_command(ch,
+ &descriptors
+ [i]);
+ } while (i-- >= 0);
+ }
+ return err;
+ }
+
+ /* link them! */
+ if (i > 0) {
+ descriptors[i - 1].next_descr = &descriptors[i];
+ descriptors[i - 1].command->next =
+ descriptors[i].handle;
+ }
+ }
+
+ /* make list circular */
+ descriptors[items - 1].next_descr = &descriptors[0];
+ descriptors[items - 1].command->next = descriptors[0].handle;
+
+ chain->total_count = items;
+ chain->chain = descriptors;
+ chain->free_index = 0;
+ chain->active_index = 0;
+ chain->cooked_index = 0;
+ chain->free_count = items;
+ chain->active_count = 0;
+ chain->cooked_count = 0;
+ chain->bus = STMP3XXX_DMA_BUS(ch);
+ chain->channel = STMP3XXX_DMA_CHANNEL(ch);
+ return err;
+}
+EXPORT_SYMBOL(stmp3xxx_dma_make_chain);
+
+void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain)
+{
+ BUG_ON(stmp3xxx_dma_running(STMP3XXX_DMA(chain->channel, chain->bus)));
+ chain->free_index = 0;
+ chain->active_index = 0;
+ chain->cooked_index = 0;
+ chain->free_count = chain->total_count;
+ chain->active_count = 0;
+ chain->cooked_count = 0;
+}
+EXPORT_SYMBOL(stmp37xx_circ_clear_chain);
+
+void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain,
+ unsigned count)
+{
+ BUG_ON(chain->cooked_count < count);
+
+ chain->cooked_count -= count;
+ chain->cooked_index += count;
+ chain->cooked_index %= chain->total_count;
+ chain->free_count += count;
+}
+EXPORT_SYMBOL(stmp37xx_circ_advance_free);
+
+void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain,
+ unsigned count)
+{
+ void __iomem *c;
+ u32 mask_clr, mask;
+ BUG_ON(chain->free_count < count);
+
+ chain->free_count -= count;
+ chain->free_index += count;
+ chain->free_index %= chain->total_count;
+ chain->active_count += count;
+
+ switch (chain->bus) {
+ case STMP3XXX_BUS_APBH:
+ c = REGS_APBH_BASE + HW_APBH_CHn_SEMA + 0x70 * chain->channel;
+ mask_clr = BM_APBH_CHn_SEMA_INCREMENT_SEMA;
+ mask = BF(count, APBH_CHn_SEMA_INCREMENT_SEMA);
+ break;
+ case STMP3XXX_BUS_APBX:
+ c = REGS_APBX_BASE + HW_APBX_CHn_SEMA + 0x70 * chain->channel;
+ mask_clr = BM_APBX_CHn_SEMA_INCREMENT_SEMA;
+ mask = BF(count, APBX_CHn_SEMA_INCREMENT_SEMA);
+ break;
+ default:
+ BUG();
+ return;
+ }
+
+ /* Set counting semaphore (kicks off transfer). Assumes
+ peripheral has been set up correctly */
+ stmp3xxx_clearl(mask_clr, c);
+ stmp3xxx_setl(mask, c);
+}
+EXPORT_SYMBOL(stmp37xx_circ_advance_active);
+
+unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain)
+{
+ unsigned cooked;
+
+ cooked = chain->active_count -
+ stmp3xxx_dma_read_semaphore(STMP3XXX_DMA(chain->channel, chain->bus));
+
+ chain->active_count -= cooked;
+ chain->active_index += cooked;
+ chain->active_index %= chain->total_count;
+
+ chain->cooked_count += cooked;
+
+ return cooked;
+}
+EXPORT_SYMBOL(stmp37xx_circ_advance_cooked);
+
+void stmp3xxx_dma_set_alt_target(int channel, int function)
+{
+#if defined(CONFIG_ARCH_STMP37XX)
+ unsigned bits = 4;
+#elif defined(CONFIG_ARCH_STMP378X)
+ unsigned bits = 2;
+#else
+#error wrong arch
+#endif
+ int shift = STMP3XXX_DMA_CHANNEL(channel) * bits;
+ unsigned mask = (1<<bits) - 1;
+ void __iomem *c;
+
+ BUG_ON(function < 0 || function >= (1<<bits));
+ pr_debug("%s: channel = %d, using mask %x, "
+ "shift = %d\n", __func__, channel, mask, shift);
+
+ switch (STMP3XXX_DMA_BUS(channel)) {
+ case STMP3XXX_BUS_APBH:
+ c = REGS_APBH_BASE + HW_APBH_DEVSEL;
+ break;
+ case STMP3XXX_BUS_APBX:
+ c = REGS_APBX_BASE + HW_APBX_DEVSEL;
+ break;
+ default:
+ BUG();
+ }
+ stmp3xxx_clearl(mask << shift, c);
+ stmp3xxx_setl(mask << shift, c);
+}
+EXPORT_SYMBOL(stmp3xxx_dma_set_alt_target);
+
+void stmp3xxx_dma_suspend(void)
+{
+ stmp3xxx_setl(BM_APBH_CTRL0_CLKGATE, REGS_APBH_BASE + HW_APBH_CTRL0);
+ stmp3xxx_setl(BM_APBX_CTRL0_CLKGATE, REGS_APBX_BASE + HW_APBX_CTRL0);
+}
+
+void stmp3xxx_dma_resume(void)
+{
+ stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST,
+ REGS_APBH_BASE + HW_APBH_CTRL0);
+ stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST,
+ REGS_APBX_BASE + HW_APBX_CTRL0);
+}
+
+#ifdef CONFIG_CPU_FREQ
+
+struct dma_notifier_block {
+ struct notifier_block nb;
+ void *data;
+};
+
+static int dma_cpufreq_notifier(struct notifier_block *self,
+ unsigned long phase, void *p)
+{
+ switch (phase) {
+ case CPUFREQ_POSTCHANGE:
+ stmp3xxx_dma_resume();
+ break;
+
+ case CPUFREQ_PRECHANGE:
+ stmp3xxx_dma_suspend();
+ break;
+
+ default:
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct dma_notifier_block dma_cpufreq_nb = {
+ .nb = {
+ .notifier_call = dma_cpufreq_notifier,
+ },
+};
+#endif /* CONFIG_CPU_FREQ */
+
+void __init stmp3xxx_dma_init(void)
+{
+ stmp3xxx_clearl(BM_APBH_CTRL0_CLKGATE | BM_APBH_CTRL0_SFTRST,
+ REGS_APBH_BASE + HW_APBH_CTRL0);
+ stmp3xxx_clearl(BM_APBX_CTRL0_CLKGATE | BM_APBX_CTRL0_SFTRST,
+ REGS_APBX_BASE + HW_APBX_CTRL0);
+#ifdef CONFIG_CPU_FREQ
+ cpufreq_register_notifier(&dma_cpufreq_nb.nb,
+ CPUFREQ_TRANSITION_NOTIFIER);
+#endif /* CONFIG_CPU_FREQ */
+}
diff --git a/arch/arm/plat-stmp3xxx/include/mach/clkdev.h b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h
new file mode 100644
index 0000000..f9c3977
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/clkdev.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/cputype.h b/arch/arm/plat-stmp3xxx/include/mach/cputype.h
new file mode 100644
index 0000000..b4e205b
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/cputype.h
@@ -0,0 +1,33 @@
+/*
+ * Freescale STMP37XX/STMP378X CPU type detection
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_CPU_H
+#define __ASM_PLAT_CPU_H
+
+#ifdef CONFIG_ARCH_STMP37XX
+#define cpu_is_stmp37xx() (1)
+#else
+#define cpu_is_stmp37xx() (0)
+#endif
+
+#ifdef CONFIG_ARCH_STMP378X
+#define cpu_is_stmp378x() (1)
+#else
+#define cpu_is_stmp378x() (0)
+#endif
+
+#endif /* __ASM_PLAT_CPU_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
new file mode 100644
index 0000000..fb3b969
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
@@ -0,0 +1,42 @@
+/*
+ * Debugging macro include header
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ moveq \rx, #0x80000000 @ physical base address
+ addeq \rx, \rx, #0x00070000
+ movne \rx, #0xf0000000 @ virtual base
+ addne \rx, \rx, #0x00070000
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #0] @ data register at 0
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #0x18] @ UARTFLG
+ tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
+ bne 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #0x18] @ UARTFLG
+ tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
+ bne 1001b
+ .endm
diff --git a/arch/arm/plat-stmp3xxx/include/mach/dma.h b/arch/arm/plat-stmp3xxx/include/mach/dma.h
new file mode 100644
index 0000000..7c58557
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/dma.h
@@ -0,0 +1,153 @@
+/*
+ * Freescale STMP37XX/STMP378X DMA helper interface
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_STMP3XXX_DMA_H
+#define __ASM_PLAT_STMP3XXX_DMA_H
+
+#include <linux/platform_device.h>
+#include <linux/dmapool.h>
+
+#if !defined(MAX_PIO_WORDS)
+#define MAX_PIO_WORDS (15)
+#endif
+
+#define STMP3XXX_BUS_APBH 0
+#define STMP3XXX_BUS_APBX 1
+#define STMP3XXX_DMA_MAX_CHANNEL 16
+#define STMP3XXX_DMA_BUS(dma) ((dma) / 16)
+#define STMP3XXX_DMA_CHANNEL(dma) ((dma) % 16)
+#define STMP3XXX_DMA(channel, bus) ((bus) * 16 + (channel))
+#define MAX_DMA_ADDRESS 0xffffffff
+#define MAX_DMA_CHANNELS 32
+
+struct stmp3xxx_dma_command {
+ u32 next;
+ u32 cmd;
+ union {
+ u32 buf_ptr;
+ u32 alternate;
+ };
+ u32 pio_words[MAX_PIO_WORDS];
+};
+
+struct stmp3xxx_dma_descriptor {
+ struct stmp3xxx_dma_command *command;
+ dma_addr_t handle;
+
+ /* The virtual address of the buffer pointer */
+ void *virtual_buf_ptr;
+ /* The next descriptor in a the DMA chain (optional) */
+ struct stmp3xxx_dma_descriptor *next_descr;
+};
+
+struct stmp37xx_circ_dma_chain {
+ unsigned total_count;
+ struct stmp3xxx_dma_descriptor *chain;
+
+ unsigned free_index;
+ unsigned free_count;
+ unsigned active_index;
+ unsigned active_count;
+ unsigned cooked_index;
+ unsigned cooked_count;
+
+ int bus;
+ unsigned channel;
+};
+
+static inline struct stmp3xxx_dma_descriptor
+ *stmp3xxx_dma_circ_get_free_head(struct stmp37xx_circ_dma_chain *chain)
+{
+ return &(chain->chain[chain->free_index]);
+}
+
+static inline struct stmp3xxx_dma_descriptor
+ *stmp3xxx_dma_circ_get_cooked_head(struct stmp37xx_circ_dma_chain *chain)
+{
+ return &(chain->chain[chain->cooked_index]);
+}
+
+int stmp3xxx_dma_request(int ch, struct device *dev, const char *name);
+int stmp3xxx_dma_release(int ch);
+int stmp3xxx_dma_allocate_command(int ch,
+ struct stmp3xxx_dma_descriptor *descriptor);
+int stmp3xxx_dma_free_command(int ch,
+ struct stmp3xxx_dma_descriptor *descriptor);
+void stmp3xxx_dma_continue(int channel, u32 semaphore);
+void stmp3xxx_dma_go(int ch, struct stmp3xxx_dma_descriptor *head,
+ u32 semaphore);
+int stmp3xxx_dma_running(int ch);
+int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain,
+ struct stmp3xxx_dma_descriptor descriptors[],
+ unsigned items);
+void stmp3xxx_dma_free_chain(struct stmp37xx_circ_dma_chain *chain);
+void stmp37xx_circ_clear_chain(struct stmp37xx_circ_dma_chain *chain);
+void stmp37xx_circ_advance_free(struct stmp37xx_circ_dma_chain *chain,
+ unsigned count);
+void stmp37xx_circ_advance_active(struct stmp37xx_circ_dma_chain *chain,
+ unsigned count);
+unsigned stmp37xx_circ_advance_cooked(struct stmp37xx_circ_dma_chain *chain);
+int stmp3xxx_dma_read_semaphore(int ch);
+void stmp3xxx_dma_init(void);
+void stmp3xxx_dma_set_alt_target(int ch, int target);
+void stmp3xxx_dma_suspend(void);
+void stmp3xxx_dma_resume(void);
+
+/*
+ * STMP37xx and STMP378x have different DMA control
+ * registers layout
+ */
+
+void stmp3xxx_arch_dma_freeze(int ch);
+void stmp3xxx_arch_dma_unfreeze(int ch);
+void stmp3xxx_arch_dma_reset_channel(int ch);
+void stmp3xxx_arch_dma_enable_interrupt(int ch);
+void stmp3xxx_arch_dma_clear_interrupt(int ch);
+int stmp3xxx_arch_dma_is_interrupt(int ch);
+
+static inline void stmp3xxx_dma_reset_channel(int ch)
+{
+ stmp3xxx_arch_dma_reset_channel(ch);
+}
+
+
+static inline void stmp3xxx_dma_freeze(int ch)
+{
+ stmp3xxx_arch_dma_freeze(ch);
+}
+
+static inline void stmp3xxx_dma_unfreeze(int ch)
+{
+ stmp3xxx_arch_dma_unfreeze(ch);
+}
+
+static inline void stmp3xxx_dma_enable_interrupt(int ch)
+{
+ stmp3xxx_arch_dma_enable_interrupt(ch);
+}
+
+static inline void stmp3xxx_dma_clear_interrupt(int ch)
+{
+ stmp3xxx_arch_dma_clear_interrupt(ch);
+}
+
+static inline int stmp3xxx_dma_is_interrupt(int ch)
+{
+ return stmp3xxx_arch_dma_is_interrupt(ch);
+}
+
+#endif /* __ASM_PLAT_STMP3XXX_DMA_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpio.h b/arch/arm/plat-stmp3xxx/include/mach/gpio.h
new file mode 100644
index 0000000..a8b5792
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/gpio.h
@@ -0,0 +1,28 @@
+/*
+ * Freescale STMP37XX/STMP378X GPIO interface
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_GPIO_H
+#define __ASM_PLAT_GPIO_H
+
+#define ARCH_NR_GPIOS (32 * 3)
+#define gpio_to_irq(gpio) __gpio_to_irq(gpio)
+#define gpio_get_value(gpio) __gpio_get_value(gpio)
+#define gpio_set_value(gpio, value) __gpio_set_value(gpio, value)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_PLAT_GPIO_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/gpmi.h b/arch/arm/plat-stmp3xxx/include/mach/gpmi.h
new file mode 100644
index 0000000..e166432
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/gpmi.h
@@ -0,0 +1,12 @@
+#ifndef __MACH_GPMI_H
+
+#include <linux/mtd/partitions.h>
+#include <mach/regs-gpmi.h>
+
+struct gpmi_platform_data {
+ void *pins;
+ int nr_parts;
+ struct mtd_partition *parts;
+ const char *part_types[];
+};
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/hardware.h b/arch/arm/plat-stmp3xxx/include/mach/hardware.h
new file mode 100644
index 0000000..47b8978
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/hardware.h
@@ -0,0 +1,32 @@
+/*
+ * This file contains the hardware definitions of the Freescale STMP3XXX
+ *
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * Where in virtual memory the IO devices (timers, system controllers
+ * and so on)
+ */
+#define IO_BASE 0xF0000000 /* VA of IO */
+#define IO_SIZE 0x00100000 /* How much? */
+#define IO_START 0x80000000 /* PA of IO */
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) (((x) & 0x000fffff) | IO_BASE)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/io.h b/arch/arm/plat-stmp3xxx/include/mach/io.h
new file mode 100644
index 0000000..d08b1b7
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/io.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+#define __mem_isa(a) (a)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/memory.h b/arch/arm/plat-stmp3xxx/include/mach/memory.h
new file mode 100644
index 0000000..7b875a0
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/memory.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x40000000)
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/mmc.h b/arch/arm/plat-stmp3xxx/include/mach/mmc.h
new file mode 100644
index 0000000..ba81e15
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/mmc.h
@@ -0,0 +1,14 @@
+#ifndef _MACH_MMC_H
+#define _MACH_MMC_H
+
+#include <mach/regs-ssp.h>
+
+struct stmp3xxxmmc_platform_data {
+ int (*get_wp)(void);
+ unsigned long (*setclock)(void __iomem *base, unsigned long);
+ void (*cmd_pullup)(int);
+ int (*hw_init)(void);
+ void (*hw_release)(void);
+};
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/pinmux.h b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h
new file mode 100644
index 0000000..cc5af82
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/pinmux.h
@@ -0,0 +1,157 @@
+/*
+ * Freescale STMP37XX/STMP378X Pin Multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __PINMUX_H
+#define __PINMUX_H
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <asm-generic/gpio.h>
+
+/* Pin definitions */
+#include "pins.h"
+#include <mach/pins.h>
+
+/*
+ * Each pin may be routed up to four different HW interfaces
+ * including GPIO
+ */
+enum pin_fun {
+ PIN_FUN1 = 0,
+ PIN_FUN2,
+ PIN_FUN3,
+ PIN_GPIO,
+};
+
+/*
+ * Each pin may have different output drive strength in range from
+ * 4mA to 20mA. The most common case is 4, 8 and 12 mA strengths.
+ */
+enum pin_strength {
+ PIN_4MA = 0,
+ PIN_8MA,
+ PIN_12MA,
+ PIN_16MA,
+ PIN_20MA,
+};
+
+/*
+ * Each pin can be programmed for 1.8V or 3.3V
+ */
+enum pin_voltage {
+ PIN_1_8V = 0,
+ PIN_3_3V,
+};
+
+/*
+ * Structure to define a group of pins and their parameters
+ */
+struct pin_desc {
+ unsigned id;
+ enum pin_fun fun;
+ enum pin_strength strength;
+ enum pin_voltage voltage;
+ unsigned pullup:1;
+};
+
+struct pin_group {
+ struct pin_desc *pins;
+ int nr_pins;
+};
+
+/* Set pin drive strength */
+void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength,
+ const char *label);
+
+/* Set pin voltage */
+void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage,
+ const char *label);
+
+/* Enable pull-up resistor for a pin */
+void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label);
+
+/*
+ * Request a pin ownership, only one module (identified by @label)
+ * may own a pin.
+ */
+int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label);
+
+/* Release pin */
+void stmp3xxx_release_pin(unsigned id, const char *label);
+
+void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun);
+
+/*
+ * Each bank is associated with a number of registers to control
+ * pin function, drive strength, voltage and pull-up reigster. The
+ * number of registers of a given type depends on the number of bits
+ * describin particular pin.
+ */
+#define HW_MUXSEL_NUM 2 /* registers per bank */
+#define HW_MUXSEL_PIN_LEN 2 /* bits per pin */
+#define HW_MUXSEL_PIN_NUM 16 /* pins per register */
+#define HW_MUXSEL_PINFUN_MASK 0x3 /* pin function mask */
+#define HW_MUXSEL_PINFUN_NUM 4 /* four options for a pin */
+
+#define HW_DRIVE_NUM 4 /* registers per bank */
+#define HW_DRIVE_PIN_LEN 4 /* bits per pin */
+#define HW_DRIVE_PIN_NUM 8 /* pins per register */
+#define HW_DRIVE_PINDRV_MASK 0x3 /* pin strength mask - 2 bits */
+#define HW_DRIVE_PINDRV_NUM 5 /* five possible strength values */
+#define HW_DRIVE_PINV_MASK 0x4 /* pin voltage mask - 1 bit */
+
+
+struct stmp3xxx_pinmux_bank {
+ struct gpio_chip chip;
+
+ /* Pins allocation map */
+ unsigned long pin_map;
+
+ /* Pin owner names */
+ const char *pin_labels[32];
+
+ /* Bank registers */
+ void __iomem *hw_muxsel[HW_MUXSEL_NUM];
+ void __iomem *hw_drive[HW_DRIVE_NUM];
+ void __iomem *hw_pull;
+
+ void __iomem *pin2irq,
+ *irqlevel,
+ *irqpolarity,
+ *irqen,
+ *irqstat;
+
+ /* HW MUXSEL register function bit values */
+ u8 functions[HW_MUXSEL_PINFUN_NUM];
+
+ /*
+ * HW DRIVE register strength bit values:
+ * 0xff - requested strength is not supported for this bank
+ */
+ u8 strengths[HW_DRIVE_PINDRV_NUM];
+
+ /* GPIO things */
+ void __iomem *hw_gpio_in,
+ *hw_gpio_out,
+ *hw_gpio_doe;
+ int irq, virq;
+};
+
+int __init stmp3xxx_pinmux_init(int virtual_irq_start);
+
+#endif /* __PINMUX_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/pins.h b/arch/arm/plat-stmp3xxx/include/mach/pins.h
new file mode 100644
index 0000000..c573318
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/pins.h
@@ -0,0 +1,30 @@
+/*
+ * Freescale STMP37XX/STMP378X Pin multiplexing interface definitions
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_PINS_H
+#define __ASM_PLAT_PINS_H
+
+#define STMP3XXX_PINID(bank, pin) (bank * 32 + pin)
+#define STMP3XXX_PINID_TO_BANK(pinid) (pinid / 32)
+#define STMP3XXX_PINID_TO_PINNUM(pinid) (pinid % 32)
+
+/*
+ * Special invalid pin identificator to show a pin doesn't exist
+ */
+#define PINID_NO_PIN STMP3XXX_PINID(0xFF, 0xFF)
+
+#endif /* __ASM_PLAT_PINS_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/platform.h b/arch/arm/plat-stmp3xxx/include/mach/platform.h
new file mode 100644
index 0000000..7007dda
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/platform.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_PLATFORM_H
+#define __ASM_PLAT_PLATFORM_H
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
+#include <asm/sizes.h>
+
+/* Virtual address where registers are mapped */
+#define STMP3XXX_REGS_PHBASE 0x80000000
+#ifdef __ASSEMBLER__
+#define STMP3XXX_REGS_BASE 0xF0000000
+#else
+#define STMP3XXX_REGS_BASE (void __iomem *)0xF0000000
+#endif
+#define STMP3XXX_REGS_SIZE SZ_1M
+
+/* Virtual address where OCRAM is mapped */
+#define STMP3XXX_OCRAM_PHBASE 0x00000000
+#ifdef __ASSEMBLER__
+#define STMP3XXX_OCRAM_BASE 0xf1000000
+#else
+#define STMP3XXX_OCRAM_BASE (void __iomem *)0xf1000000
+#endif
+#define STMP3XXX_OCRAM_SIZE (32 * SZ_1K)
+
+#ifdef CONFIG_ARCH_STMP37XX
+#define IRQ_PRIORITY_REG_RD HW_ICOLL_PRIORITYn_RD
+#define IRQ_PRIORITY_REG_WR HW_ICOLL_PRIORITYn_WR
+#endif
+
+#ifdef CONFIG_ARCH_STMP378X
+#define IRQ_PRIORITY_REG_RD HW_ICOLL_INTERRUPTn_RD
+#define IRQ_PRIORITY_REG_WR HW_ICOLL_INTERRUPTn_WR
+#endif
+
+#define HW_STMP3XXX_SET 0x04
+#define HW_STMP3XXX_CLR 0x08
+#define HW_STMP3XXX_TOG 0x0c
+
+#ifndef __ASSEMBLER__
+static inline void stmp3xxx_clearl(u32 v, void __iomem *r)
+{
+ __raw_writel(v, r + HW_STMP3XXX_CLR);
+}
+
+static inline void stmp3xxx_setl(u32 v, void __iomem *r)
+{
+ __raw_writel(v, r + HW_STMP3XXX_SET);
+}
+#endif
+
+#define BF(value, field) (((value) << BP_##field) & BM_##field)
+
+#endif /* __ASM_ARCH_PLATFORM_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h
new file mode 100644
index 0000000..2e300fe
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/stmp3xxx.h
@@ -0,0 +1,54 @@
+/*
+ * Freescale STMP37XX/STMP378X core structure and function declarations
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_STMP3XXX_H
+#define __ASM_PLAT_STMP3XXX_H
+
+#include <linux/irq.h>
+
+extern struct sys_timer stmp3xxx_timer;
+
+void stmp3xxx_init_irq(struct irq_chip *chip);
+void stmp3xxx_init(void);
+int stmp3xxx_reset_block(void __iomem *hwreg, int just_enable);
+extern struct platform_device stmp3xxx_dbguart,
+ stmp3xxx_appuart,
+ stmp3xxx_watchdog,
+ stmp3xxx_touchscreen,
+ stmp3xxx_keyboard,
+ stmp3xxx_gpmi,
+ stmp3xxx_mmc,
+ stmp3xxx_udc,
+ stmp3xxx_ehci,
+ stmp3xxx_rtc,
+ stmp3xxx_spi1,
+ stmp3xxx_spi2,
+ stmp3xxx_backlight,
+ stmp3xxx_rotdec,
+ stmp3xxx_dcp,
+ stmp3xxx_dcp_bootstream,
+ stmp3xxx_persistent,
+ stmp3xxx_framebuffer,
+ stmp3xxx_battery;
+int stmp3xxx_ssp1_device_register(void);
+int stmp3xxx_ssp2_device_register(void);
+
+struct pin_group;
+void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label);
+int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label);
+
+#endif /* __ASM_PLAT_STMP3XXX_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/system.h b/arch/arm/plat-stmp3xxx/include/mach/system.h
new file mode 100644
index 0000000..28a9888
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2005 Sigmatel Inc
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/proc-fns.h>
+#include <mach/platform.h>
+#include <mach/regs-clkctrl.h>
+#include <mach/regs-power.h>
+
+static inline void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching
+ * and wait for interrupt tricks
+ */
+
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ /* Set BATTCHRG to default value */
+ __raw_writel(0x00010000, REGS_POWER_BASE + HW_POWER_CHARGE);
+
+ /* Set MINPWR to default value */
+ __raw_writel(0, REGS_POWER_BASE + HW_POWER_MINPWR);
+
+ /* Reset digital side of chip (but not power or RTC) */
+ __raw_writel(BM_CLKCTRL_RESET_DIG,
+ REGS_CLKCTRL_BASE + HW_CLKCTRL_RESET);
+
+ /* Should not return */
+}
+
+#endif
diff --git a/arch/arm/plat-stmp3xxx/include/mach/timex.h b/arch/arm/plat-stmp3xxx/include/mach/timex.h
new file mode 100644
index 0000000..3373985
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * System time clock is sourced from the 32k clock
+ */
+#define CLOCK_TICK_RATE (32768)
diff --git a/arch/arm/plat-stmp3xxx/include/mach/uncompress.h b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h
new file mode 100644
index 0000000..f79f5ee
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/uncompress.h
@@ -0,0 +1,53 @@
+/*
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ASM_PLAT_UNCOMPRESS_H
+#define __ASM_PLAT_UNCOMPRESS_H
+
+/*
+ * Register includes are for when the MMU enabled; we need to define our
+ * own stuff here for pre-MMU use
+ */
+#define UARTDBG_BASE 0x80070000
+#define UART(c) (((volatile unsigned *)UARTDBG_BASE)[c])
+
+/*
+ * This does not append a newline
+ */
+static void putc(char c)
+{
+ /* Wait for TX fifo empty */
+ while ((UART(6) & (1<<7)) == 0)
+ continue;
+
+ /* Write byte */
+ UART(0) = c;
+
+ /* Wait for last bit to exit the UART */
+ while (UART(6) & (1<<3))
+ continue;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif /* __ASM_PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
new file mode 100644
index 0000000..541b880
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#define VMALLOC_END (0xF0000000)
diff --git a/arch/arm/plat-stmp3xxx/irq.c b/arch/arm/plat-stmp3xxx/irq.c
new file mode 100644
index 0000000..20de4e0
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/irq.c
@@ -0,0 +1,51 @@
+/*
+ * Freescale STMP37XX/STMP378X common interrupt handling code
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/sysdev.h>
+
+#include <mach/stmp3xxx.h>
+#include <mach/platform.h>
+#include <mach/regs-icoll.h>
+
+void __init stmp3xxx_init_irq(struct irq_chip *chip)
+{
+ unsigned int i, lv;
+
+ /* Reset the interrupt controller */
+ stmp3xxx_reset_block(REGS_ICOLL_BASE + HW_ICOLL_CTRL, true);
+
+ /* Disable all interrupts initially */
+ for (i = 0; i < NR_REAL_IRQS; i++) {
+ chip->mask(i);
+ set_irq_chip(i, chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ }
+
+ /* Ensure vector is cleared */
+ for (lv = 0; lv < 4; lv++)
+ __raw_writel(1 << lv, REGS_ICOLL_BASE + HW_ICOLL_LEVELACK);
+ __raw_writel(0, REGS_ICOLL_BASE + HW_ICOLL_VECTOR);
+
+ /* Barrier */
+ (void)__raw_readl(REGS_ICOLL_BASE + HW_ICOLL_STAT);
+}
+
diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c
new file mode 100644
index 0000000..d412003
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/pinmux.c
@@ -0,0 +1,552 @@
+/*
+ * Freescale STMP378X/STMP378X Pin Multiplexing
+ *
+ * Author: Vladislav Buzov <vbuzov@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#define DEBUG
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/sysdev.h>
+#include <linux/string.h>
+#include <linux/bitops.h>
+#include <linux/sysdev.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <mach/regs-pinctrl.h>
+#include <mach/pins.h>
+#include <mach/pinmux.h>
+
+#define NR_BANKS ARRAY_SIZE(pinmux_banks)
+static struct stmp3xxx_pinmux_bank pinmux_banks[] = {
+ [0] = {
+ .hw_muxsel = {
+ REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL0,
+ REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL1,
+ },
+ .hw_drive = {
+ REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE0,
+ REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE1,
+ REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE2,
+ REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE3,
+ },
+ .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL0,
+ .functions = { 0x0, 0x1, 0x2, 0x3 },
+ .strengths = { 0x0, 0x1, 0x2, 0x3, 0xff },
+
+ .hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN0,
+ .hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT0,
+ .hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE0,
+ .irq = IRQ_GPIO0,
+
+ .pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ0,
+ .irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT0,
+ .irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL0,
+ .irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL0,
+ .irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN0,
+ },
+ [1] = {
+ .hw_muxsel = {
+ REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL2,
+ REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL3,
+ },
+ .hw_drive = {
+ REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE4,
+ REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE5,
+ REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE6,
+ REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE7,
+ },
+ .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL1,
+ .functions = { 0x0, 0x1, 0x2, 0x3 },
+ .strengths = { 0x0, 0x1, 0x2, 0x3, 0xff },
+
+ .hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN1,
+ .hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT1,
+ .hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE1,
+ .irq = IRQ_GPIO1,
+
+ .pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ1,
+ .irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT1,
+ .irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL1,
+ .irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL1,
+ .irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN1,
+ },
+ [2] = {
+ .hw_muxsel = {
+ REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL4,
+ REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL5,
+ },
+ .hw_drive = {
+ REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE8,
+ REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE9,
+ REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE10,
+ REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE11,
+ },
+ .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL2,
+ .functions = { 0x0, 0x1, 0x2, 0x3 },
+ .strengths = { 0x0, 0x1, 0x2, 0x1, 0x2 },
+
+ .hw_gpio_in = REGS_PINCTRL_BASE + HW_PINCTRL_DIN2,
+ .hw_gpio_out = REGS_PINCTRL_BASE + HW_PINCTRL_DOUT2,
+ .hw_gpio_doe = REGS_PINCTRL_BASE + HW_PINCTRL_DOE2,
+ .irq = IRQ_GPIO2,
+
+ .pin2irq = REGS_PINCTRL_BASE + HW_PINCTRL_PIN2IRQ2,
+ .irqstat = REGS_PINCTRL_BASE + HW_PINCTRL_IRQSTAT2,
+ .irqlevel = REGS_PINCTRL_BASE + HW_PINCTRL_IRQLEVEL2,
+ .irqpolarity = REGS_PINCTRL_BASE + HW_PINCTRL_IRQPOL2,
+ .irqen = REGS_PINCTRL_BASE + HW_PINCTRL_IRQEN2,
+ },
+ [3] = {
+ .hw_muxsel = {
+ REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL6,
+ REGS_PINCTRL_BASE + HW_PINCTRL_MUXSEL7,
+ },
+ .hw_drive = {
+ REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE12,
+ REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE13,
+ REGS_PINCTRL_BASE + HW_PINCTRL_DRIVE14,
+ NULL,
+ },
+ .hw_pull = REGS_PINCTRL_BASE + HW_PINCTRL_PULL3,
+ .functions = {0x0, 0x1, 0x2, 0x3},
+ .strengths = {0x0, 0x1, 0x2, 0x3, 0xff},
+ },
+};
+
+static inline struct stmp3xxx_pinmux_bank *
+stmp3xxx_pinmux_bank(unsigned id, unsigned *bank, unsigned *pin)
+{
+ unsigned b, p;
+
+ b = STMP3XXX_PINID_TO_BANK(id);
+ p = STMP3XXX_PINID_TO_PINNUM(id);
+ BUG_ON(b >= NR_BANKS);
+ if (bank)
+ *bank = b;
+ if (pin)
+ *pin = p;
+ return &pinmux_banks[b];
+}
+
+/* Check if requested pin is owned by caller */
+static int stmp3xxx_check_pin(unsigned id, const char *label)
+{
+ unsigned pin;
+ struct stmp3xxx_pinmux_bank *pm = stmp3xxx_pinmux_bank(id, NULL, &pin);
+
+ if (!test_bit(pin, &pm->pin_map)) {
+ printk(KERN_WARNING
+ "%s: Accessing free pin %x, caller %s\n",
+ __func__, id, label);
+
+ return -EINVAL;
+ }
+
+ if (label && pm->pin_labels[pin] &&
+ strcmp(label, pm->pin_labels[pin])) {
+ printk(KERN_WARNING
+ "%s: Wrong pin owner %x, caller %s owner %s\n",
+ __func__, id, label, pm->pin_labels[pin]);
+
+ return -EINVAL;
+ }
+ return 0;
+}
+
+void stmp3xxx_pin_strength(unsigned id, enum pin_strength strength,
+ const char *label)
+{
+ struct stmp3xxx_pinmux_bank *pbank;
+ void __iomem *hwdrive;
+ u32 shift, val;
+ u32 bank, pin;
+
+ pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+ pr_debug("%s: label %s bank %d pin %d strength %d\n", __func__, label,
+ bank, pin, strength);
+
+ hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM];
+ shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN;
+ val = pbank->strengths[strength];
+ if (val == 0xff) {
+ printk(KERN_WARNING
+ "%s: strength is not supported for bank %d, caller %s",
+ __func__, bank, label);
+ return;
+ }
+
+ if (stmp3xxx_check_pin(id, label))
+ return;
+
+ pr_debug("%s: writing 0x%x to 0x%p register\n", __func__,
+ val << shift, hwdrive);
+ stmp3xxx_clearl(HW_DRIVE_PINDRV_MASK << shift, hwdrive);
+ stmp3xxx_setl(val << shift, hwdrive);
+}
+
+void stmp3xxx_pin_voltage(unsigned id, enum pin_voltage voltage,
+ const char *label)
+{
+ struct stmp3xxx_pinmux_bank *pbank;
+ void __iomem *hwdrive;
+ u32 shift;
+ u32 bank, pin;
+
+ pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+ pr_debug("%s: label %s bank %d pin %d voltage %d\n", __func__, label,
+ bank, pin, voltage);
+
+ hwdrive = pbank->hw_drive[pin / HW_DRIVE_PIN_NUM];
+ shift = (pin % HW_DRIVE_PIN_NUM) * HW_DRIVE_PIN_LEN;
+
+ if (stmp3xxx_check_pin(id, label))
+ return;
+
+ pr_debug("%s: changing 0x%x bit in 0x%p register\n",
+ __func__, HW_DRIVE_PINV_MASK << shift, hwdrive);
+ if (voltage == PIN_1_8V)
+ stmp3xxx_clearl(HW_DRIVE_PINV_MASK << shift, hwdrive);
+ else
+ stmp3xxx_setl(HW_DRIVE_PINV_MASK << shift, hwdrive);
+}
+
+void stmp3xxx_pin_pullup(unsigned id, int enable, const char *label)
+{
+ struct stmp3xxx_pinmux_bank *pbank;
+ void __iomem *hwpull;
+ u32 bank, pin;
+
+ pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+ pr_debug("%s: label %s bank %d pin %d enable %d\n", __func__, label,
+ bank, pin, enable);
+
+ hwpull = pbank->hw_pull;
+
+ if (stmp3xxx_check_pin(id, label))
+ return;
+
+ pr_debug("%s: changing 0x%x bit in 0x%p register\n",
+ __func__, 1 << pin, hwpull);
+ if (enable)
+ stmp3xxx_setl(1 << pin, hwpull);
+ else
+ stmp3xxx_clearl(1 << pin, hwpull);
+}
+
+int stmp3xxx_request_pin(unsigned id, enum pin_fun fun, const char *label)
+{
+ struct stmp3xxx_pinmux_bank *pbank;
+ u32 bank, pin;
+ int ret = 0;
+
+ pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+ pr_debug("%s: label %s bank %d pin %d fun %d\n", __func__, label,
+ bank, pin, fun);
+
+ if (test_bit(pin, &pbank->pin_map)) {
+ printk(KERN_WARNING
+ "%s: CONFLICT DETECTED pin %d:%d caller %s owner %s\n",
+ __func__, bank, pin, label, pbank->pin_labels[pin]);
+ return -EBUSY;
+ }
+
+ set_bit(pin, &pbank->pin_map);
+ pbank->pin_labels[pin] = label;
+
+ stmp3xxx_set_pin_type(id, fun);
+
+ return ret;
+}
+
+void stmp3xxx_set_pin_type(unsigned id, enum pin_fun fun)
+{
+ struct stmp3xxx_pinmux_bank *pbank;
+ void __iomem *hwmux;
+ u32 shift, val;
+ u32 bank, pin;
+
+ pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+
+ hwmux = pbank->hw_muxsel[pin / HW_MUXSEL_PIN_NUM];
+ shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN;
+
+ val = pbank->functions[fun];
+ shift = (pin % HW_MUXSEL_PIN_NUM) * HW_MUXSEL_PIN_LEN;
+ pr_debug("%s: writing 0x%x to 0x%p register\n",
+ __func__, val << shift, hwmux);
+ stmp3xxx_clearl(HW_MUXSEL_PINFUN_MASK << shift, hwmux);
+ stmp3xxx_setl(val << shift, hwmux);
+}
+
+void stmp3xxx_release_pin(unsigned id, const char *label)
+{
+ struct stmp3xxx_pinmux_bank *pbank;
+ u32 bank, pin;
+
+ pbank = stmp3xxx_pinmux_bank(id, &bank, &pin);
+ pr_debug("%s: label %s bank %d pin %d\n", __func__, label, bank, pin);
+
+ if (stmp3xxx_check_pin(id, label))
+ return;
+
+ clear_bit(pin, &pbank->pin_map);
+ pbank->pin_labels[pin] = NULL;
+}
+
+int stmp3xxx_request_pin_group(struct pin_group *pin_group, const char *label)
+{
+ struct pin_desc *pin;
+ int p;
+ int err = 0;
+
+ /* Allocate and configure pins */
+ for (p = 0; p < pin_group->nr_pins; p++) {
+ pr_debug("%s: #%d\n", __func__, p);
+ pin = &pin_group->pins[p];
+
+ err = stmp3xxx_request_pin(pin->id, pin->fun, label);
+ if (err)
+ goto out_err;
+
+ stmp3xxx_pin_strength(pin->id, pin->strength, label);
+ stmp3xxx_pin_voltage(pin->id, pin->voltage, label);
+ stmp3xxx_pin_pullup(pin->id, pin->pullup, label);
+ }
+
+ return 0;
+
+out_err:
+ /* Release allocated pins in case of error */
+ while (--p >= 0) {
+ pr_debug("%s: releasing #%d\n", __func__, p);
+ stmp3xxx_release_pin(pin_group->pins[p].id, label);
+ }
+ return err;
+}
+EXPORT_SYMBOL(stmp3xxx_request_pin_group);
+
+void stmp3xxx_release_pin_group(struct pin_group *pin_group, const char *label)
+{
+ struct pin_desc *pin;
+ int p;
+
+ for (p = 0; p < pin_group->nr_pins; p++) {
+ pin = &pin_group->pins[p];
+ stmp3xxx_release_pin(pin->id, label);
+ }
+}
+EXPORT_SYMBOL(stmp3xxx_release_pin_group);
+
+static int stmp3xxx_irq_to_gpio(int irq,
+ struct stmp3xxx_pinmux_bank **bank, unsigned *gpio)
+{
+ struct stmp3xxx_pinmux_bank *pm;
+
+ for (pm = pinmux_banks; pm < pinmux_banks + NR_BANKS; pm++)
+ if (pm->virq <= irq && irq < pm->virq + 32) {
+ *bank = pm;
+ *gpio = irq - pm->virq;
+ return 0;
+ }
+ return -ENOENT;
+}
+
+static int stmp3xxx_set_irqtype(unsigned irq, unsigned type)
+{
+ struct stmp3xxx_pinmux_bank *pm;
+ unsigned gpio;
+ int l, p;
+
+ stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ l = 0; p = 1; break;
+ case IRQ_TYPE_EDGE_FALLING:
+ l = 0; p = 0; break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ l = 1; p = 1; break;
+ case IRQ_TYPE_LEVEL_LOW:
+ l = 1; p = 0; break;
+ default:
+ pr_debug("%s: Incorrect GPIO interrupt type 0x%x\n",
+ __func__, type);
+ return -ENXIO;
+ }
+
+ if (l)
+ stmp3xxx_setl(1 << gpio, pm->irqlevel);
+ else
+ stmp3xxx_clearl(1 << gpio, pm->irqlevel);
+ if (p)
+ stmp3xxx_setl(1 << gpio, pm->irqpolarity);
+ else
+ stmp3xxx_clearl(1 << gpio, pm->irqpolarity);
+ return 0;
+}
+
+static void stmp3xxx_pin_ack_irq(unsigned irq)
+{
+ u32 stat;
+ struct stmp3xxx_pinmux_bank *pm;
+ unsigned gpio;
+
+ stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+ stat = __raw_readl(pm->irqstat) & (1 << gpio);
+ stmp3xxx_clearl(stat, pm->irqstat);
+}
+
+static void stmp3xxx_pin_mask_irq(unsigned irq)
+{
+ struct stmp3xxx_pinmux_bank *pm;
+ unsigned gpio;
+
+ stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+ stmp3xxx_clearl(1 << gpio, pm->irqen);
+ stmp3xxx_clearl(1 << gpio, pm->pin2irq);
+}
+
+static void stmp3xxx_pin_unmask_irq(unsigned irq)
+{
+ struct stmp3xxx_pinmux_bank *pm;
+ unsigned gpio;
+
+ stmp3xxx_irq_to_gpio(irq, &pm, &gpio);
+ stmp3xxx_setl(1 << gpio, pm->irqen);
+ stmp3xxx_setl(1 << gpio, pm->pin2irq);
+}
+
+static inline
+struct stmp3xxx_pinmux_bank *to_pinmux_bank(struct gpio_chip *chip)
+{
+ return container_of(chip, struct stmp3xxx_pinmux_bank, chip);
+}
+
+static int stmp3xxx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+ return pm->virq + offset;
+}
+
+static int stmp3xxx_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+ unsigned v;
+
+ v = __raw_readl(pm->hw_gpio_in) & (1 << offset);
+ return v ? 1 : 0;
+}
+
+static void stmp3xxx_gpio_set(struct gpio_chip *chip, unsigned offset, int v)
+{
+ struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+
+ if (v)
+ stmp3xxx_setl(1 << offset, pm->hw_gpio_out);
+ else
+ stmp3xxx_clearl(1 << offset, pm->hw_gpio_out);
+}
+
+static int stmp3xxx_gpio_output(struct gpio_chip *chip, unsigned offset, int v)
+{
+ struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+
+ stmp3xxx_setl(1 << offset, pm->hw_gpio_doe);
+ stmp3xxx_gpio_set(chip, offset, v);
+ return 0;
+}
+
+static int stmp3xxx_gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct stmp3xxx_pinmux_bank *pm = to_pinmux_bank(chip);
+
+ stmp3xxx_clearl(1 << offset, pm->hw_gpio_doe);
+ return 0;
+}
+
+static int stmp3xxx_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ return stmp3xxx_request_pin(chip->base + offset, PIN_GPIO, "gpio");
+}
+
+static void stmp3xxx_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ stmp3xxx_release_pin(chip->base + offset, "gpio");
+}
+
+static void stmp3xxx_gpio_irq(u32 irq, struct irq_desc *desc)
+{
+ struct stmp3xxx_pinmux_bank *pm = get_irq_data(irq);
+ int gpio_irq = pm->virq;
+ u32 stat = __raw_readl(pm->irqstat);
+
+ while (stat) {
+ if (stat & 1)
+ irq_desc[gpio_irq].handle_irq(gpio_irq,
+ &irq_desc[gpio_irq]);
+ gpio_irq++;
+ stat >>= 1;
+ }
+}
+
+static struct irq_chip gpio_irq_chip = {
+ .ack = stmp3xxx_pin_ack_irq,
+ .mask = stmp3xxx_pin_mask_irq,
+ .unmask = stmp3xxx_pin_unmask_irq,
+ .set_type = stmp3xxx_set_irqtype,
+};
+
+int __init stmp3xxx_pinmux_init(int virtual_irq_start)
+{
+ int b, r = 0;
+ struct stmp3xxx_pinmux_bank *pm;
+ int virq;
+
+ for (b = 0; b < 3; b++) {
+ /* only banks 0,1,2 are allowed to GPIO */
+ pm = pinmux_banks + b;
+ pm->chip.base = 32 * b;
+ pm->chip.ngpio = 32;
+ pm->chip.owner = THIS_MODULE;
+ pm->chip.can_sleep = 1;
+ pm->chip.exported = 1;
+ pm->chip.to_irq = stmp3xxx_gpio_to_irq;
+ pm->chip.direction_input = stmp3xxx_gpio_input;
+ pm->chip.direction_output = stmp3xxx_gpio_output;
+ pm->chip.get = stmp3xxx_gpio_get;
+ pm->chip.set = stmp3xxx_gpio_set;
+ pm->chip.request = stmp3xxx_gpio_request;
+ pm->chip.free = stmp3xxx_gpio_free;
+ pm->virq = virtual_irq_start + b * 32;
+
+ for (virq = pm->virq; virq < pm->virq; virq++) {
+ gpio_irq_chip.mask(virq);
+ set_irq_chip(virq, &gpio_irq_chip);
+ set_irq_handler(virq, handle_level_irq);
+ set_irq_flags(virq, IRQF_VALID);
+ }
+ r = gpiochip_add(&pm->chip);
+ if (r < 0)
+ break;
+ set_irq_chained_handler(pm->irq, stmp3xxx_gpio_irq);
+ set_irq_data(pm->irq, pm);
+ }
+ return r;
+}
+
+MODULE_AUTHOR("Vladislav Buzov");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/plat-stmp3xxx/timer.c b/arch/arm/plat-stmp3xxx/timer.c
new file mode 100644
index 0000000..063c7bc
--- /dev/null
+++ b/arch/arm/plat-stmp3xxx/timer.c
@@ -0,0 +1,189 @@
+/*
+ * System timer for Freescale STMP37XX/STMP378X
+ *
+ * Embedded Alley Solutions, Inc <source@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach/time.h>
+#include <mach/stmp3xxx.h>
+#include <mach/platform.h>
+#include <mach/regs-timrot.h>
+
+static irqreturn_t
+stmp3xxx_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *c = dev_id;
+
+ /* timer 0 */
+ if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0) &
+ BM_TIMROT_TIMCTRLn_IRQ) {
+ stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ,
+ REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+ c->event_handler(c);
+ }
+
+ /* timer 1 */
+ else if (__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1)
+ & BM_TIMROT_TIMCTRLn_IRQ) {
+ stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ,
+ REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+ stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN,
+ REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+ __raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static cycle_t stmp3xxx_clock_read(struct clocksource *cs)
+{
+ return ~((__raw_readl(REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1)
+ & 0xFFFF0000) >> 16);
+}
+
+static int
+stmp3xxx_timrot_set_next_event(unsigned long delta,
+ struct clock_event_device *dev)
+{
+ /* reload the timer */
+ __raw_writel(delta, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+ return 0;
+}
+
+static void
+stmp3xxx_timrot_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *dev)
+{
+}
+
+static struct clock_event_device ckevt_timrot = {
+ .name = "timrot",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .set_next_event = stmp3xxx_timrot_set_next_event,
+ .set_mode = stmp3xxx_timrot_set_mode,
+};
+
+static struct clocksource cksrc_stmp3xxx = {
+ .name = "cksrc_stmp3xxx",
+ .rating = 250,
+ .read = stmp3xxx_clock_read,
+ .mask = CLOCKSOURCE_MASK(16),
+ .shift = 10,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct irqaction stmp3xxx_timer_irq = {
+ .name = "stmp3xxx_timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = stmp3xxx_timer_interrupt,
+ .dev_id = &ckevt_timrot,
+};
+
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static void __init stmp3xxx_init_timer(void)
+{
+ cksrc_stmp3xxx.mult = clocksource_hz2mult(CLOCK_TICK_RATE,
+ cksrc_stmp3xxx.shift);
+ ckevt_timrot.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
+ ckevt_timrot.shift);
+ ckevt_timrot.min_delta_ns = clockevent_delta2ns(2, &ckevt_timrot);
+ ckevt_timrot.max_delta_ns = clockevent_delta2ns(0xFFF, &ckevt_timrot);
+ ckevt_timrot.cpumask = cpumask_of(0);
+
+ stmp3xxx_reset_block(REGS_TIMROT_BASE, false);
+
+ /* clear two timers */
+ __raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+ __raw_writel(0, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+
+ /* configure them */
+ __raw_writel(
+ (8 << BP_TIMROT_TIMCTRLn_SELECT) | /* 32 kHz */
+ BM_TIMROT_TIMCTRLn_RELOAD |
+ BM_TIMROT_TIMCTRLn_UPDATE |
+ BM_TIMROT_TIMCTRLn_IRQ_EN,
+ REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+ __raw_writel(
+ (8 << BP_TIMROT_TIMCTRLn_SELECT) | /* 32 kHz */
+ BM_TIMROT_TIMCTRLn_RELOAD |
+ BM_TIMROT_TIMCTRLn_UPDATE |
+ BM_TIMROT_TIMCTRLn_IRQ_EN,
+ REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+
+ __raw_writel(CLOCK_TICK_RATE / HZ - 1,
+ REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+ __raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+
+ setup_irq(IRQ_TIMER0, &stmp3xxx_timer_irq);
+
+ clocksource_register(&cksrc_stmp3xxx);
+ clockevents_register_device(&ckevt_timrot);
+}
+
+#ifdef CONFIG_PM
+
+void stmp3xxx_suspend_timer(void)
+{
+ stmp3xxx_clearl(BM_TIMROT_TIMCTRLn_IRQ_EN | BM_TIMROT_TIMCTRLn_IRQ,
+ REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+ stmp3xxx_setl(BM_TIMROT_ROTCTRL_CLKGATE,
+ REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL);
+}
+
+void stmp3xxx_resume_timer(void)
+{
+ stmp3xxx_clearl(BM_TIMROT_ROTCTRL_SFTRST | BM_TIMROT_ROTCTRL_CLKGATE,
+ REGS_TIMROT_BASE + HW_TIMROT_ROTCTRL);
+ __raw_writel(
+ 8 << BP_TIMROT_TIMCTRLn_SELECT | /* 32 kHz */
+ BM_TIMROT_TIMCTRLn_RELOAD |
+ BM_TIMROT_TIMCTRLn_UPDATE |
+ BM_TIMROT_TIMCTRLn_IRQ_EN,
+ REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL0);
+ __raw_writel(
+ 8 << BP_TIMROT_TIMCTRLn_SELECT | /* 32 kHz */
+ BM_TIMROT_TIMCTRLn_RELOAD |
+ BM_TIMROT_TIMCTRLn_UPDATE |
+ BM_TIMROT_TIMCTRLn_IRQ_EN,
+ REGS_TIMROT_BASE + HW_TIMROT_TIMCTRL1);
+ __raw_writel(CLOCK_TICK_RATE / HZ - 1,
+ REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT0);
+ __raw_writel(0xFFFF, REGS_TIMROT_BASE + HW_TIMROT_TIMCOUNT1);
+}
+
+#else
+
+#define stmp3xxx_suspend_timer NULL
+#define stmp3xxx_resume_timer NULL
+
+#endif /* CONFIG_PM */
+
+struct sys_timer stmp3xxx_timer = {
+ .init = stmp3xxx_init_timer,
+ .suspend = stmp3xxx_suspend_timer,
+ .resume = stmp3xxx_resume_timer,
+};
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 83c4e38..1aeae38 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -100,6 +100,7 @@ ENTRY(vfp_support_entry)
beq no_old_VFP_process
VFPFSTMIA r4, r5 @ save the working registers
VFPFMRX r5, FPSCR @ current status
+#ifndef CONFIG_CPU_FEROCEON
tst r1, #FPEXC_EX @ is there additional state to save?
beq 1f
VFPFMRX r6, FPINST @ FPINST (only if FPEXC.EX is set)
@@ -107,6 +108,7 @@ ENTRY(vfp_support_entry)
beq 1f
VFPFMRX r8, FPINST2 @ FPINST2 if needed (and present)
1:
+#endif
stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2
@ and point r4 at the word at the
@ start of the register dump
@@ -119,6 +121,7 @@ no_old_VFP_process:
VFPFLDMIA r10, r5 @ reload the working registers while
@ FPEXC is in a safe state
ldmia r10, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2
+#ifndef CONFIG_CPU_FEROCEON
tst r1, #FPEXC_EX @ is there additional state to restore?
beq 1f
VFPFMXR FPINST, r6 @ restore FPINST (only if FPEXC.EX is set)
@@ -126,6 +129,7 @@ no_old_VFP_process:
beq 1f
VFPFMXR FPINST2, r8 @ FPINST2 if needed (and present)
1:
+#endif
VFPFMXR FPSCR, r5 @ restore status
check_for_exception:
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 01599c4..2d7423a 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -253,12 +253,14 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
}
if (fpexc & FPEXC_EX) {
+#ifndef CONFIG_CPU_FEROCEON
/*
* Asynchronous exception. The instruction is read from FPINST
* and the interrupted instruction has to be restarted.
*/
trigger = fmrx(FPINST);
regs->ARM_pc -= 4;
+#endif
} else if (!(fpexc & FPEXC_DEX)) {
/*
* Illegal combination of bits. It can be caused by an
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 9120717..2aa1908 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -535,6 +535,15 @@ config PATA_OPTIDMA
If unsure, say N.
+config PATA_PALMLD
+ tristate "Palm LifeDrive PATA support"
+ depends on MACH_PALMLD
+ help
+ This option enables support for Palm LifeDrive's internal ATA
+ port via the new ATA layer.
+
+ If unsure, say N.
+
config PATA_PCMCIA
tristate "PCMCIA PATA support"
depends on PCMCIA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 7f1ecf9..1558059 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o
obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o
obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o
+obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o
obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o
obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o
obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o
diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c
new file mode 100644
index 0000000..11fb4cc
--- /dev/null
+++ b/drivers/ata/pata_palmld.c
@@ -0,0 +1,150 @@
+/*
+ * drivers/ata/pata_palmld.c
+ *
+ * Driver for IDE channel in Palm LifeDrive
+ *
+ * Based on research of:
+ * Alex Osborne <ato@meshy.org>
+ *
+ * Rewrite for mainline:
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Rewritten version based on pata_ixp4xx_cf.c:
+ * ixp4xx PATA/Compact Flash driver
+ * Copyright (C) 2006-07 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <scsi/scsi_host.h>
+#include <mach/palmld.h>
+
+#define DRV_NAME "pata_palmld"
+
+static struct scsi_host_template palmld_sht = {
+ ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations palmld_port_ops = {
+ .inherits = &ata_sff_port_ops,
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
+ .cable_detect = ata_cable_40wire,
+};
+
+static __devinit int palmld_pata_probe(struct platform_device *pdev)
+{
+ struct ata_host *host;
+ struct ata_port *ap;
+ void __iomem *mem;
+ int ret;
+
+ /* allocate host */
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+
+ /* remap drive's physical memory address */
+ mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000);
+ if (!mem)
+ return -ENOMEM;
+
+ /* request and activate power GPIO, IRQ GPIO */
+ ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0);
+ if (ret)
+ goto err3;
+
+ /* reset the drive */
+ gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0);
+ msleep(30);
+ gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 1);
+ msleep(30);
+
+ /* setup the ata port */
+ ap = host->ports[0];
+ ap->ops = &palmld_port_ops;
+ ap->pio_mask = ATA_PIO4;
+ ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_PIO_POLLING;
+
+ /* memory mapping voodoo */
+ ap->ioaddr.cmd_addr = mem + 0x10;
+ ap->ioaddr.altstatus_addr = mem + 0xe;
+ ap->ioaddr.ctl_addr = mem + 0xe;
+
+ /* start the port */
+ ata_sff_std_ports(&ap->ioaddr);
+
+ /* activate host */
+ return ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING,
+ &palmld_sht);
+
+err3:
+ gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+err2:
+ gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+err1:
+ return ret;
+}
+
+static __devexit int palmld_pata_remove(struct platform_device *dev)
+{
+ struct ata_host *host = platform_get_drvdata(dev);
+
+ ata_host_detach(host);
+
+ /* power down the HDD */
+ gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0);
+
+ gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+ gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+
+ return 0;
+}
+
+static struct platform_driver palmld_pata_platform_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = palmld_pata_probe,
+ .remove = __devexit_p(palmld_pata_remove),
+};
+
+static int __init palmld_pata_init(void)
+{
+ return platform_driver_register(&palmld_pata_platform_driver);
+}
+
+static void __exit palmld_pata_exit(void)
+{
+ platform_driver_unregister(&palmld_pata_platform_driver);
+}
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PalmLD PATA driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_init(palmld_pata_init);
+module_exit(palmld_pata_exit);
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 9c00440..f4b3f72 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -148,3 +148,15 @@ config HW_RANDOM_VIRTIO
To compile this driver as a module, choose M here: the
module will be called virtio-rng. If unsure, say N.
+
+config HW_RANDOM_MXC_RNGA
+ tristate "Freescale i.MX RNGA Random Number Generator"
+ depends on HW_RANDOM && ARCH_HAS_RNGA
+ ---help---
+ This driver provides kernel-side support for the Random Number
+ Generator hardware found on Freescale i.MX processors.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mxc-rnga.
+
+ If unsure, say Y.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index e81d21a..fd1ecd2 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
+obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
diff --git a/drivers/char/hw_random/mxc-rnga.c b/drivers/char/hw_random/mxc-rnga.c
new file mode 100644
index 0000000..187c6be
--- /dev/null
+++ b/drivers/char/hw_random/mxc-rnga.c
@@ -0,0 +1,247 @@
+/*
+ * RNG driver for Freescale RNGA
+ *
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Author: Alan Carvalho de Assis <acassis@gmail.com>
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * This driver is based on other RNG drivers.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+
+/* RNGA Registers */
+#define RNGA_CONTROL 0x00
+#define RNGA_STATUS 0x04
+#define RNGA_ENTROPY 0x08
+#define RNGA_OUTPUT_FIFO 0x0c
+#define RNGA_MODE 0x10
+#define RNGA_VERIFICATION_CONTROL 0x14
+#define RNGA_OSC_CONTROL_COUNTER 0x18
+#define RNGA_OSC1_COUNTER 0x1c
+#define RNGA_OSC2_COUNTER 0x20
+#define RNGA_OSC_COUNTER_STATUS 0x24
+
+/* RNGA Registers Range */
+#define RNG_ADDR_RANGE 0x28
+
+/* RNGA Control Register */
+#define RNGA_CONTROL_SLEEP 0x00000010
+#define RNGA_CONTROL_CLEAR_INT 0x00000008
+#define RNGA_CONTROL_MASK_INTS 0x00000004
+#define RNGA_CONTROL_HIGH_ASSURANCE 0x00000002
+#define RNGA_CONTROL_GO 0x00000001
+
+#define RNGA_STATUS_LEVEL_MASK 0x0000ff00
+
+/* RNGA Status Register */
+#define RNGA_STATUS_OSC_DEAD 0x80000000
+#define RNGA_STATUS_SLEEP 0x00000010
+#define RNGA_STATUS_ERROR_INT 0x00000008
+#define RNGA_STATUS_FIFO_UNDERFLOW 0x00000004
+#define RNGA_STATUS_LAST_READ_STATUS 0x00000002
+#define RNGA_STATUS_SECURITY_VIOLATION 0x00000001
+
+static struct platform_device *rng_dev;
+
+static int mxc_rnga_data_present(struct hwrng *rng)
+{
+ int level;
+ void __iomem *rng_base = (void __iomem *)rng->priv;
+
+ /* how many random numbers is in FIFO? [0-16] */
+ level = ((__raw_readl(rng_base + RNGA_STATUS) &
+ RNGA_STATUS_LEVEL_MASK) >> 8);
+
+ return level > 0 ? 1 : 0;
+}
+
+static int mxc_rnga_data_read(struct hwrng *rng, u32 * data)
+{
+ int err;
+ u32 ctrl;
+ void __iomem *rng_base = (void __iomem *)rng->priv;
+
+ /* retrieve a random number from FIFO */
+ *data = __raw_readl(rng_base + RNGA_OUTPUT_FIFO);
+
+ /* some error while reading this random number? */
+ err = __raw_readl(rng_base + RNGA_STATUS) & RNGA_STATUS_ERROR_INT;
+
+ /* if error: clear error interrupt, but doesn't return random number */
+ if (err) {
+ dev_dbg(&rng_dev->dev, "Error while reading random number!\n");
+ ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+ __raw_writel(ctrl | RNGA_CONTROL_CLEAR_INT,
+ rng_base + RNGA_CONTROL);
+ return 0;
+ } else
+ return 4;
+}
+
+static int mxc_rnga_init(struct hwrng *rng)
+{
+ u32 ctrl, osc;
+ void __iomem *rng_base = (void __iomem *)rng->priv;
+
+ /* wake up */
+ ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+ __raw_writel(ctrl & ~RNGA_CONTROL_SLEEP, rng_base + RNGA_CONTROL);
+
+ /* verify if oscillator is working */
+ osc = __raw_readl(rng_base + RNGA_STATUS);
+ if (osc & RNGA_STATUS_OSC_DEAD) {
+ dev_err(&rng_dev->dev, "RNGA Oscillator is dead!\n");
+ return -ENODEV;
+ }
+
+ /* go running */
+ ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+ __raw_writel(ctrl | RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+
+ return 0;
+}
+
+static void mxc_rnga_cleanup(struct hwrng *rng)
+{
+ u32 ctrl;
+ void __iomem *rng_base = (void __iomem *)rng->priv;
+
+ ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+
+ /* stop rnga */
+ __raw_writel(ctrl & ~RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+}
+
+static struct hwrng mxc_rnga = {
+ .name = "mxc-rnga",
+ .init = mxc_rnga_init,
+ .cleanup = mxc_rnga_cleanup,
+ .data_present = mxc_rnga_data_present,
+ .data_read = mxc_rnga_data_read
+};
+
+static int __init mxc_rnga_probe(struct platform_device *pdev)
+{
+ int err = -ENODEV;
+ struct clk *clk;
+ struct resource *res, *mem;
+ void __iomem *rng_base = NULL;
+
+ if (rng_dev)
+ return -EBUSY;
+
+ clk = clk_get(&pdev->dev, "rng");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "Could not get rng_clk!\n");
+ err = PTR_ERR(clk);
+ goto out;
+ }
+
+ clk_enable(clk);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ err = -ENOENT;
+ goto err_region;
+ }
+
+ mem = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (mem == NULL) {
+ err = -EBUSY;
+ goto err_region;
+ }
+
+ rng_base = ioremap(res->start, resource_size(res));
+ if (!rng_base) {
+ err = -ENOMEM;
+ goto err_ioremap;
+ }
+
+ mxc_rnga.priv = (unsigned long)rng_base;
+
+ err = hwrng_register(&mxc_rnga);
+ if (err) {
+ dev_err(&pdev->dev, "MXC RNGA registering failed (%d)\n", err);
+ goto err_register;
+ }
+
+ rng_dev = pdev;
+
+ dev_info(&pdev->dev, "MXC RNGA Registered.\n");
+
+ return 0;
+
+err_register:
+ iounmap(rng_base);
+ rng_base = NULL;
+
+err_ioremap:
+ release_mem_region(res->start, resource_size(res));
+
+err_region:
+ clk_disable(clk);
+ clk_put(clk);
+
+out:
+ return err;
+}
+
+static int __exit mxc_rnga_remove(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ void __iomem *rng_base = (void __iomem *)mxc_rnga.priv;
+ struct clk *clk = clk_get(&pdev->dev, "rng");
+
+ hwrng_unregister(&mxc_rnga);
+
+ iounmap(rng_base);
+
+ release_mem_region(res->start, resource_size(res));
+
+ clk_disable(clk);
+ clk_put(clk);
+
+ return 0;
+}
+
+static struct platform_driver mxc_rnga_driver = {
+ .driver = {
+ .name = "mxc_rnga",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(mxc_rnga_remove),
+};
+
+static int __init mod_init(void)
+{
+ return platform_driver_probe(&mxc_rnga_driver, mxc_rnga_probe);
+}
+
+static void __exit mod_exit(void)
+{
+ platform_driver_unregister(&mxc_rnga_driver);
+}
+
+module_init(mod_init);
+module_exit(mod_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("H/W RNGA driver for i.MX");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index acc7143..035a6c7 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -34,10 +34,24 @@
#include <linux/err.h>
#include <linux/clk.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <mach/i2c.h>
+#include <plat/i2c.h>
+
+/*
+ * I2C register offsets will be shifted 0 or 1 bit left, depending on
+ * different SoCs
+ */
+#define REG_SHIFT_0 (0 << 0)
+#define REG_SHIFT_1 (1 << 0)
+#define REG_SHIFT(d) ((d) & 0x1)
+
+static const struct platform_device_id i2c_pxa_id_table[] = {
+ { "pxa2xx-i2c", REG_SHIFT_1 },
+ { "pxa3xx-pwri2c", REG_SHIFT_0 },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
/*
* I2C registers and bit definitions
@@ -985,6 +999,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
struct pxa_i2c *i2c;
struct resource *res;
struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
+ struct platform_device_id *id = platform_get_device_id(dev);
int ret;
int irq;
@@ -1028,7 +1043,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
ret = -EIO;
goto eremap;
}
- i2c->reg_shift = (cpu_is_pxa3xx() && (dev->id == 1)) ? 0 : 1;
+ i2c->reg_shift = REG_SHIFT(id->driver_data);
i2c->iobase = res->start;
i2c->iosize = res_len(res);
@@ -1150,6 +1165,7 @@ static struct platform_driver i2c_pxa_driver = {
.name = "pxa2xx-i2c",
.owner = THIS_MODULE,
},
+ .id_table = i2c_pxa_id_table,
};
static int __init i2c_adap_pxa_init(void)
diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
index a28c06d..89b3941 100644
--- a/drivers/input/serio/ambakmi.c
+++ b/drivers/input/serio/ambakmi.c
@@ -135,7 +135,7 @@ static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id)
io->dev.parent = &dev->dev;
kmi->io = io;
- kmi->base = ioremap(dev->res.start, KMI_SIZE);
+ kmi->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!kmi->base) {
ret = -ENOMEM;
goto out;
diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
index 1aa46a3..173d104 100644
--- a/drivers/leds/leds-h1940.c
+++ b/drivers/leds/leds-h1940.c
@@ -16,6 +16,8 @@
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/leds.h>
+#include <linux/gpio.h>
+
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
#include <mach/h1940-latch.h>
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index aa2e7ae..aa7acf3 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 9d48da2..57835f5 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -758,10 +758,14 @@ config VIDEO_MX1
---help---
This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
+config MX3_VIDEO
+ bool
+
config VIDEO_MX3
tristate "i.MX3x Camera Sensor Interface driver"
depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
select VIDEOBUF_DMA_CONTIG
+ select MX3_VIDEO
---help---
This is a v4l2 driver for the i.MX3x Camera Sensor Interface
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index b4cf691..3eb87bd 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -155,7 +155,7 @@ config MMC_ATMELMCI_DMA
config MMC_IMX
tristate "Motorola i.MX Multimedia Card Interface support"
- depends on ARCH_IMX
+ depends on ARCH_MX1
help
This selects the Motorola i.MX Multimedia card Interface.
If you have a i.MX platform with a Multimedia Card slot,
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 7d4febd..e1aa847 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -546,7 +546,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
host->mclk = clk_get_rate(host->clk);
DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
}
- host->base = ioremap(dev->res.start, SZ_4K);
+ host->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!host->base) {
ret = -ENOMEM;
goto clk_disable;
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index c40cb96..1cf9cfb 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1073,7 +1073,6 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
mmc->max_seg_size = mmc->max_req_size;
- mmc->ocr_avail = mmc_slot(host).ocr_mask;
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
if (pdata->slots[host->slot_id].wires >= 8)
@@ -1110,13 +1109,14 @@ static int __init omap_mmc_probe(struct platform_device *pdev)
goto err_irq;
}
+ /* initialize power supplies, gpios, etc */
if (pdata->init != NULL) {
if (pdata->init(&pdev->dev) != 0) {
- dev_dbg(mmc_dev(host->mmc),
- "Unable to configure MMC IRQs\n");
+ dev_dbg(mmc_dev(host->mmc), "late init error\n");
goto err_irq_cd_init;
}
}
+ mmc->ocr_avail = mmc_slot(host).ocr_mask;
/* Request IRQ for card detect */
if ((mmc_slot(host).card_detect_irq)) {
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 2db166b..4eb4f37 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -17,6 +17,7 @@
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/cpufreq.h>
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/io.h>
@@ -789,7 +790,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host,
last_source = source;
- s3c2410_dma_devconfig(host->dma, source, 3,
+ s3c2410_dma_devconfig(host->dma, source,
host->mem->start + host->sdidata);
if (!setup_ok) {
@@ -1121,7 +1122,7 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
case MMC_POWER_OFF:
default:
s3c2410_gpio_setpin(S3C2410_GPE5, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP);
+ s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPIO_OUTPUT);
if (host->is2440)
mci_con |= S3C2440_SDICON_SDRESET;
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index f2e9de1..6391e3d 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -39,7 +39,6 @@
#include <mach/gpmc.h>
#include <mach/onenand.h>
#include <mach/gpio.h>
-#include <mach/pm.h>
#include <mach/dma.h>
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index a740053..b6d1881 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -456,7 +456,8 @@ static inline void queue_put_desc(unsigned int queue, u32 phys,
debug_desc(phys, desc);
BUG_ON(phys & 0x1F);
qmgr_put_entry(queue, phys);
- BUG_ON(qmgr_stat_overflow(queue));
+ /* Don't check for queue overflow here, we've allocated sufficient
+ length and queues >= 32 don't support this check anyway. */
}
@@ -512,8 +513,8 @@ static int eth_poll(struct napi_struct *napi, int budget)
#endif
napi_complete(napi);
qmgr_enable_irq(rxq);
- if (!qmgr_stat_empty(rxq) &&
- napi_reschedule(napi)) {
+ if (!qmgr_stat_below_low_watermark(rxq) &&
+ napi_reschedule(napi)) { /* not empty again */
#if DEBUG_RX
printk(KERN_DEBUG "%s: eth_poll"
" napi_reschedule successed\n",
@@ -630,9 +631,9 @@ static void eth_txdone_irq(void *unused)
port->tx_buff_tab[n_desc] = NULL;
}
- start = qmgr_stat_empty(port->plat->txreadyq);
+ start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
queue_put_desc(port->plat->txreadyq, phys, desc);
- if (start) {
+ if (start) { /* TX-ready queue was empty */
#if DEBUG_TX
printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n",
port->netdev->name);
@@ -708,13 +709,14 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc);
dev->trans_start = jiffies;
- if (qmgr_stat_empty(txreadyq)) {
+ if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
#if DEBUG_TX
printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
#endif
netif_stop_queue(dev);
/* we could miss TX ready interrupt */
- if (!qmgr_stat_empty(txreadyq)) {
+ /* really empty in fact */
+ if (!qmgr_stat_below_low_watermark(txreadyq)) {
#if DEBUG_TX
printk(KERN_DEBUG "%s: eth_xmit ready again\n",
dev->name);
@@ -814,29 +816,29 @@ static int request_queues(struct port *port)
int err;
err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0,
- "%s:RX-free", port->netdev->name);
+ "%s:RX-free", port->netdev->name);
if (err)
return err;
err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0,
- "%s:RX", port->netdev->name);
+ "%s:RX", port->netdev->name);
if (err)
goto rel_rxfree;
err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0,
- "%s:TX", port->netdev->name);
+ "%s:TX", port->netdev->name);
if (err)
goto rel_rx;
err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0,
- "%s:TX-ready", port->netdev->name);
+ "%s:TX-ready", port->netdev->name);
if (err)
goto rel_tx;
/* TX-done queue handles skbs sent out by the NPEs */
if (!ports_open) {
err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0,
- "%s:TX-done", DRV_NAME);
+ "%s:TX-done", DRV_NAME);
if (err)
goto rel_txready;
}
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 329f890..f1f773b 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -45,7 +45,8 @@
defined(CONFIG_MACH_ZYLONITE) ||\
defined(CONFIG_MACH_LITTLETON) ||\
defined(CONFIG_MACH_ZYLONITE2) ||\
- defined(CONFIG_ARCH_VIPER)
+ defined(CONFIG_ARCH_VIPER) ||\
+ defined(CONFIG_MACH_STARGATE2)
#include <asm/mach-types.h>
@@ -73,7 +74,7 @@
/* We actually can't write halfwords properly if not word aligned */
static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
{
- if (machine_is_mainstone() && reg & 2) {
+ if ((machine_is_mainstone() || machine_is_stargate2()) && reg & 2) {
unsigned int v = val << 16;
v |= readl(ioaddr + (reg & ~2)) & 0xffff;
writel(v, ioaddr + (reg & ~2));
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 765a7f5..a6dc317 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -579,7 +579,8 @@ static inline void queue_put_desc(unsigned int queue, u32 phys,
debug_desc(phys, desc);
BUG_ON(phys & 0x1F);
qmgr_put_entry(queue, phys);
- BUG_ON(qmgr_stat_overflow(queue));
+ /* Don't check for queue overflow here, we've allocated sufficient
+ length and queues >= 32 don't support this check anyway. */
}
@@ -789,10 +790,10 @@ static void hss_hdlc_txdone_irq(void *pdev)
free_buffer_irq(port->tx_buff_tab[n_desc]);
port->tx_buff_tab[n_desc] = NULL;
- start = qmgr_stat_empty(port->plat->txreadyq);
+ start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
queue_put_desc(port->plat->txreadyq,
tx_desc_phys(port, n_desc), desc);
- if (start) {
+ if (start) { /* TX-ready queue was empty */
#if DEBUG_TX
printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
" ready\n", dev->name);
@@ -867,13 +868,13 @@ static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc);
dev->trans_start = jiffies;
- if (qmgr_stat_empty(txreadyq)) {
+ if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
#if DEBUG_TX
printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
#endif
netif_stop_queue(dev);
/* we could miss TX ready interrupt */
- if (!qmgr_stat_empty(txreadyq)) {
+ if (!qmgr_stat_below_low_watermark(txreadyq)) {
#if DEBUG_TX
printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
dev->name);
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 2764735..fbf965b 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -217,7 +217,7 @@ config PCMCIA_PXA2XX
depends on ARM && ARCH_PXA && PCMCIA
depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
|| MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
- || ARCH_VIPER || ARCH_PXA_ESERIES)
+ || ARCH_VIPER || ARCH_PXA_ESERIES || MACH_STARGATE2)
help
Say Y here to include support for the PXA2xx PCMCIA controller
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index bbac463..047394d 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -73,5 +73,6 @@ pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o
pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o
pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o
pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o
+pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o
obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_core.o $(pxa2xx-obj-y)
diff --git a/drivers/pcmcia/pxa2xx_stargate2.c b/drivers/pcmcia/pxa2xx_stargate2.c
new file mode 100644
index 0000000..490749e
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_stargate2.c
@@ -0,0 +1,174 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_stargate2.c
+ *
+ * Stargate 2 PCMCIA specific routines.
+ *
+ * Created: December 6, 2005
+ * Author: Ed C. Epp
+ * Copyright: Intel Corp 2005
+ * Jonathan Cameron <jic23@cam.ac.uk> 2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <pcmcia/ss.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include "soc_common.h"
+
+#define SG2_S0_BUFF_CTL 120
+#define SG2_S0_POWER_CTL 108
+#define SG2_S0_GPIO_RESET 82
+#define SG2_S0_GPIO_DETECT 53
+#define SG2_S0_GPIO_READY 81
+
+static struct pcmcia_irqs irqs[] = {
+ { 0, IRQ_GPIO(SG2_S0_GPIO_DETECT), "PCMCIA0 CD" },
+};
+
+static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ skt->irq = IRQ_GPIO(SG2_S0_GPIO_READY);
+ return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ state->detect = !gpio_get_value(SG2_S0_GPIO_DETECT);
+ state->ready = !!gpio_get_value(SG2_S0_GPIO_READY);
+ state->bvd1 = 0; /* not available - battery detect on card */
+ state->bvd2 = 0; /* not available */
+ state->vs_3v = 1; /* not available - voltage detect for card */
+ state->vs_Xv = 0; /* not available */
+ state->wrprot = 0; /* not available - write protect */
+}
+
+static int sg2_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ /* Enable card power */
+ switch (state->Vcc) {
+ case 0:
+ /* sets power ctl register high */
+ gpio_set_value(SG2_S0_POWER_CTL, 1);
+ break;
+ case 33:
+ case 50:
+ /* sets power control register low (clear) */
+ gpio_set_value(SG2_S0_POWER_CTL, 0);
+ msleep(100);
+ break;
+ default:
+ pr_err("%s(): bad Vcc %u\n",
+ __func__, state->Vcc);
+ return -1;
+ }
+
+ /* reset */
+ gpio_set_value(SG2_S0_GPIO_RESET, !!(state->flags & SS_RESET));
+
+ return 0;
+}
+
+static void sg2_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void sg2_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static struct pcmcia_low_level sg2_pcmcia_ops __initdata = {
+ .owner = THIS_MODULE,
+ .hw_init = sg2_pcmcia_hw_init,
+ .hw_shutdown = sg2_pcmcia_hw_shutdown,
+ .socket_state = sg2_pcmcia_socket_state,
+ .configure_socket = sg2_pcmcia_configure_socket,
+ .socket_init = sg2_pcmcia_socket_init,
+ .socket_suspend = sg2_pcmcia_socket_suspend,
+ .nr = 1,
+};
+
+static struct platform_device *sg2_pcmcia_device;
+
+static int __init sg2_pcmcia_init(void)
+{
+ int ret;
+
+ if (!machine_is_stargate2())
+ return -ENODEV;
+
+ sg2_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+ if (!sg2_pcmcia_device)
+ return -ENOMEM;
+
+ ret = gpio_request(SG2_S0_BUFF_CTL, "SG2 CF buff ctl");
+ if (ret)
+ goto error_put_platform_device;
+ ret = gpio_request(SG2_S0_POWER_CTL, "SG2 CF power ctl");
+ if (ret)
+ goto error_free_gpio_buff_ctl;
+ ret = gpio_request(SG2_S0_GPIO_RESET, "SG2 CF reset");
+ if (ret)
+ goto error_free_gpio_power_ctl;
+ /* Set gpio directions */
+ gpio_direction_output(SG2_S0_BUFF_CTL, 0);
+ gpio_direction_output(SG2_S0_POWER_CTL, 1);
+ gpio_direction_output(SG2_S0_GPIO_RESET, 1);
+
+ ret = platform_device_add_data(sg2_pcmcia_device,
+ &sg2_pcmcia_ops,
+ sizeof(sg2_pcmcia_ops));
+ if (ret)
+ goto error_free_gpio_reset;
+
+ ret = platform_device_add(sg2_pcmcia_device);
+ if (ret)
+ goto error_free_gpio_reset;
+
+ return 0;
+error_free_gpio_reset:
+ gpio_free(SG2_S0_GPIO_RESET);
+error_free_gpio_power_ctl:
+ gpio_free(SG2_S0_POWER_CTL);
+error_free_gpio_buff_ctl:
+ gpio_free(SG2_S0_BUFF_CTL);
+error_put_platform_device:
+ platform_device_put(sg2_pcmcia_device);
+
+ return ret;
+}
+
+static void __exit sg2_pcmcia_exit(void)
+{
+ platform_device_unregister(sg2_pcmcia_device);
+ gpio_free(SG2_S0_BUFF_CTL);
+ gpio_free(SG2_S0_POWER_CTL);
+ gpio_free(SG2_S0_GPIO_RESET);
+}
+
+fs_initcall(sg2_pcmcia_init);
+module_exit(sg2_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c
index f7a3283..551332e 100644
--- a/drivers/rtc/rtc-ep93xx.c
+++ b/drivers/rtc/rtc-ep93xx.c
@@ -12,32 +12,56 @@
#include <linux/module.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
+#include <linux/io.h>
+
+#define EP93XX_RTC_DATA 0x000
+#define EP93XX_RTC_MATCH 0x004
+#define EP93XX_RTC_STATUS 0x008
+#define EP93XX_RTC_STATUS_INTR (1<<0)
+#define EP93XX_RTC_LOAD 0x00C
+#define EP93XX_RTC_CONTROL 0x010
+#define EP93XX_RTC_CONTROL_MIE (1<<0)
+#define EP93XX_RTC_SWCOMP 0x108
+#define EP93XX_RTC_SWCOMP_DEL_MASK 0x001f0000
+#define EP93XX_RTC_SWCOMP_DEL_SHIFT 16
+#define EP93XX_RTC_SWCOMP_INT_MASK 0x0000ffff
+#define EP93XX_RTC_SWCOMP_INT_SHIFT 0
+
+#define DRV_VERSION "0.3"
-#define EP93XX_RTC_REG(x) (EP93XX_RTC_BASE + (x))
-#define EP93XX_RTC_DATA EP93XX_RTC_REG(0x0000)
-#define EP93XX_RTC_LOAD EP93XX_RTC_REG(0x000C)
-#define EP93XX_RTC_SWCOMP EP93XX_RTC_REG(0x0108)
-
-#define DRV_VERSION "0.2"
+/*
+ * struct device dev.platform_data is used to store our private data
+ * because struct rtc_device does not have a variable to hold it.
+ */
+struct ep93xx_rtc {
+ void __iomem *mmio_base;
+};
-static int ep93xx_get_swcomp(struct device *dev, unsigned short *preload,
+static int ep93xx_rtc_get_swcomp(struct device *dev, unsigned short *preload,
unsigned short *delete)
{
- unsigned short comp = __raw_readl(EP93XX_RTC_SWCOMP);
+ struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+ unsigned long comp;
+
+ comp = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_SWCOMP);
if (preload)
- *preload = comp & 0xffff;
+ *preload = (comp & EP93XX_RTC_SWCOMP_INT_MASK)
+ >> EP93XX_RTC_SWCOMP_INT_SHIFT;
if (delete)
- *delete = (comp >> 16) & 0x1f;
+ *delete = (comp & EP93XX_RTC_SWCOMP_DEL_MASK)
+ >> EP93XX_RTC_SWCOMP_DEL_SHIFT;
return 0;
}
static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
- unsigned long time = __raw_readl(EP93XX_RTC_DATA);
+ struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+ unsigned long time;
+
+ time = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_DATA);
rtc_time_to_tm(time, tm);
return 0;
@@ -45,7 +69,9 @@ static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
static int ep93xx_rtc_set_mmss(struct device *dev, unsigned long secs)
{
- __raw_writel(secs + 1, EP93XX_RTC_LOAD);
+ struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+
+ __raw_writel(secs + 1, ep93xx_rtc->mmio_base + EP93XX_RTC_LOAD);
return 0;
}
@@ -53,7 +79,7 @@ static int ep93xx_rtc_proc(struct device *dev, struct seq_file *seq)
{
unsigned short preload, delete;
- ep93xx_get_swcomp(dev, &preload, &delete);
+ ep93xx_rtc_get_swcomp(dev, &preload, &delete);
seq_printf(seq, "preload\t\t: %d\n", preload);
seq_printf(seq, "delete\t\t: %d\n", delete);
@@ -67,54 +93,104 @@ static const struct rtc_class_ops ep93xx_rtc_ops = {
.proc = ep93xx_rtc_proc,
};
-static ssize_t ep93xx_sysfs_show_comp_preload(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_preload(struct device *dev,
struct device_attribute *attr, char *buf)
{
unsigned short preload;
- ep93xx_get_swcomp(dev, &preload, NULL);
+ ep93xx_rtc_get_swcomp(dev, &preload, NULL);
return sprintf(buf, "%d\n", preload);
}
-static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_sysfs_show_comp_preload, NULL);
+static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_rtc_show_comp_preload, NULL);
-static ssize_t ep93xx_sysfs_show_comp_delete(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_delete(struct device *dev,
struct device_attribute *attr, char *buf)
{
unsigned short delete;
- ep93xx_get_swcomp(dev, NULL, &delete);
+ ep93xx_rtc_get_swcomp(dev, NULL, &delete);
return sprintf(buf, "%d\n", delete);
}
-static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_sysfs_show_comp_delete, NULL);
+static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_rtc_show_comp_delete, NULL);
-static int __devinit ep93xx_rtc_probe(struct platform_device *dev)
+static int __init ep93xx_rtc_probe(struct platform_device *pdev)
{
- struct rtc_device *rtc = rtc_device_register("ep93xx",
- &dev->dev, &ep93xx_rtc_ops, THIS_MODULE);
+ struct ep93xx_rtc *ep93xx_rtc;
+ struct resource *res;
+ struct rtc_device *rtc;
+ int err;
+
+ ep93xx_rtc = kzalloc(sizeof(struct ep93xx_rtc), GFP_KERNEL);
+ if (ep93xx_rtc == NULL)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL)
+ return -ENXIO;
+
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (res == NULL)
+ return -EBUSY;
+
+ ep93xx_rtc->mmio_base = ioremap(res->start, resource_size(res));
+ if (ep93xx_rtc->mmio_base == NULL) {
+ err = -ENXIO;
+ goto fail;
+ }
+ pdev->dev.platform_data = ep93xx_rtc;
+
+ rtc = rtc_device_register(pdev->name,
+ &pdev->dev, &ep93xx_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
- return PTR_ERR(rtc);
+ err = PTR_ERR(rtc);
+ goto fail;
}
- platform_set_drvdata(dev, rtc);
+ platform_set_drvdata(pdev, rtc);
- device_create_file(&dev->dev, &dev_attr_comp_preload);
- device_create_file(&dev->dev, &dev_attr_comp_delete);
+ err = device_create_file(&pdev->dev, &dev_attr_comp_preload);
+ if (err)
+ goto fail;
+ err = device_create_file(&pdev->dev, &dev_attr_comp_delete);
+ if (err) {
+ device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+ goto fail;
+ }
return 0;
+
+fail:
+ if (ep93xx_rtc->mmio_base) {
+ iounmap(ep93xx_rtc->mmio_base);
+ pdev->dev.platform_data = NULL;
+ }
+ release_mem_region(res->start, resource_size(res));
+ return err;
}
-static int __devexit ep93xx_rtc_remove(struct platform_device *dev)
+static int __exit ep93xx_rtc_remove(struct platform_device *pdev)
{
- struct rtc_device *rtc = platform_get_drvdata(dev);
+ struct rtc_device *rtc = platform_get_drvdata(pdev);
+ struct ep93xx_rtc *ep93xx_rtc = pdev->dev.platform_data;
+ struct resource *res;
+
+ /* cleanup sysfs */
+ device_remove_file(&pdev->dev, &dev_attr_comp_delete);
+ device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+
+ rtc_device_unregister(rtc);
+
+ iounmap(ep93xx_rtc->mmio_base);
+ pdev->dev.platform_data = NULL;
- if (rtc)
- rtc_device_unregister(rtc);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
- platform_set_drvdata(dev, NULL);
+ platform_set_drvdata(pdev, NULL);
return 0;
}
@@ -122,23 +198,22 @@ static int __devexit ep93xx_rtc_remove(struct platform_device *dev)
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:ep93xx-rtc");
-static struct platform_driver ep93xx_rtc_platform_driver = {
+static struct platform_driver ep93xx_rtc_driver = {
.driver = {
.name = "ep93xx-rtc",
.owner = THIS_MODULE,
},
- .probe = ep93xx_rtc_probe,
- .remove = __devexit_p(ep93xx_rtc_remove),
+ .remove = __exit_p(ep93xx_rtc_remove),
};
static int __init ep93xx_rtc_init(void)
{
- return platform_driver_register(&ep93xx_rtc_platform_driver);
+ return platform_driver_probe(&ep93xx_rtc_driver, ep93xx_rtc_probe);
}
static void __exit ep93xx_rtc_exit(void)
{
- platform_driver_unregister(&ep93xx_rtc_platform_driver);
+ platform_driver_unregister(&ep93xx_rtc_driver);
}
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c
index aaf1f75..457231b 100644
--- a/drivers/rtc/rtc-pl030.c
+++ b/drivers/rtc/rtc-pl030.c
@@ -117,7 +117,7 @@ static int pl030_probe(struct amba_device *dev, struct amba_id *id)
goto err_rtc;
}
- rtc->base = ioremap(dev->res.start, SZ_4K);
+ rtc->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!rtc->base) {
ret = -ENOMEM;
goto err_map;
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 451fc13..f41873f 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -142,8 +142,7 @@ static int pl031_probe(struct amba_device *adev, struct amba_id *id)
goto out;
}
- ldata->base = ioremap(adev->res.start,
- adev->res.end - adev->res.start + 1);
+ ldata->base = ioremap(adev->res.start, resource_size(&adev->res));
if (!ldata->base) {
ret = -ENOMEM;
goto out_no_remap;
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index cdc049d..58a4879 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -686,7 +686,7 @@ static int pl010_probe(struct amba_device *dev, struct amba_id *id)
goto out;
}
- base = ioremap(dev->res.start, PAGE_SIZE);
+ base = ioremap(dev->res.start, resource_size(&dev->res));
if (!base) {
ret = -ENOMEM;
goto free;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 88fdac5..bf82e28 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -70,6 +70,23 @@ struct uart_amba_port {
struct clk *clk;
unsigned int im; /* interrupt mask */
unsigned int old_status;
+ unsigned int ifls; /* vendor-specific */
+};
+
+/* There is by now at least one vendor with differing details, so handle it */
+struct vendor_data {
+ unsigned int ifls;
+ unsigned int fifosize;
+};
+
+static struct vendor_data vendor_arm = {
+ .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+ .fifosize = 16,
+};
+
+static struct vendor_data vendor_st = {
+ .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+ .fifosize = 64,
};
static void pl011_stop_tx(struct uart_port *port)
@@ -360,8 +377,7 @@ static int pl011_startup(struct uart_port *port)
if (retval)
goto clk_dis;
- writew(UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
- uap->port.membase + UART011_IFLS);
+ writew(uap->ifls, uap->port.membase + UART011_IFLS);
/*
* Provoke TX FIFO interrupt into asserting.
@@ -732,6 +748,7 @@ static struct uart_driver amba_reg = {
static int pl011_probe(struct amba_device *dev, struct amba_id *id)
{
struct uart_amba_port *uap;
+ struct vendor_data *vendor = id->data;
void __iomem *base;
int i, ret;
@@ -750,7 +767,7 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id)
goto out;
}
- base = ioremap(dev->res.start, PAGE_SIZE);
+ base = ioremap(dev->res.start, resource_size(&dev->res));
if (!base) {
ret = -ENOMEM;
goto free;
@@ -762,12 +779,13 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id)
goto unmap;
}
+ uap->ifls = vendor->ifls;
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
uap->port.iotype = UPIO_MEM;
uap->port.irq = dev->irq[0];
- uap->port.fifosize = 16;
+ uap->port.fifosize = vendor->fifosize;
uap->port.ops = &amba_pl011_pops;
uap->port.flags = UPF_BOOT_AUTOCONF;
uap->port.line = i;
@@ -812,6 +830,12 @@ static struct amba_id pl011_ids[] __initdata = {
{
.id = 0x00041011,
.mask = 0x000fffff,
+ .data = &vendor_arm,
+ },
+ {
+ .id = 0x00380802,
+ .mask = 0x00ffffff,
+ .data = &vendor_st,
},
{ 0, 0 },
};
@@ -845,7 +869,11 @@ static void __exit pl011_exit(void)
uart_unregister_driver(&amba_reg);
}
-module_init(pl011_init);
+/*
+ * While this can be a module, if builtin it's most likely the console
+ * So let's leave module_exit but move module_init to an earlier place
+ */
+arch_initcall(pl011_init);
module_exit(pl011_exit);
MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 7b5d1de..285b414 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -71,7 +71,7 @@
#define ONEMS 0xb0 /* One Millisecond register */
#define UTS 0xb4 /* UART Test Register */
#endif
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
#define BIPR1 0xb0 /* Incremental Preset Register 1 */
#define BIPR2 0xb4 /* Incremental Preset Register 2 */
#define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -101,7 +101,7 @@
#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
#define UCR1_SNDBRK (1<<4) /* Send break */
#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
#endif
#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
@@ -132,7 +132,7 @@
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#ifdef CONFIG_ARCH_IMX
+#ifdef CONFIG_ARCH_MX1
#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
#endif
@@ -186,13 +186,6 @@
#define UTS_SOFTRST (1<<0) /* Software reset */
/* We've been assigned a range on the "Low-density serial ports" major */
-#ifdef CONFIG_ARCH_IMX
-#define SERIAL_IMX_MAJOR 204
-#define MINOR_START 41
-#define DEV_NAME "ttySMX"
-#define MAX_INTERNAL_IRQ IMX_IRQS
-#endif
-
#ifdef CONFIG_ARCH_MXC
#define SERIAL_IMX_MAJOR 207
#define MINOR_START 16
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 9574947..e8aae22 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -118,7 +118,7 @@ config SPI_GPIO
config SPI_IMX
tristate "Freescale iMX SPI controller"
- depends on ARCH_IMX && EXPERIMENTAL
+ depends on ARCH_MX1 && EXPERIMENTAL
help
This enables using the Freescale iMX SPI controller in master
mode.
@@ -171,6 +171,15 @@ config SPI_ORION
help
This enables using the SPI master controller on the Orion chips.
+config SPI_PL022
+ tristate "ARM AMBA PL022 SSP controller (EXPERIMENTAL)"
+ depends on ARM_AMBA && EXPERIMENTAL
+ default y if MACH_U300
+ help
+ This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
+ controller. If you have an embedded system with an AMBA(R)
+ bus and a PL022 controller, say Y or M here.
+
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
depends on ARCH_PXA && EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 5d04519..ecfadb1 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o
obj-$(CONFIG_SPI_ORION) += orion_spi.o
+obj-$(CONFIG_SPI_PL022) += amba-pl022.o
obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o
obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
new file mode 100644
index 0000000..da76797
--- /dev/null
+++ b/drivers/spi/amba-pl022.c
@@ -0,0 +1,1866 @@
+/*
+ * drivers/spi/amba-pl022.c
+ *
+ * A driver for the ARM PL022 PrimeCell SSP/SPI bus master.
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * Initial version inspired by:
+ * linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
+ * Initial adoption to PL022 by:
+ * Sachin Verma <sachin.verma@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * TODO:
+ * - add timeout on polled transfers
+ * - add generic DMA framework support
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+/*
+ * This macro is used to define some register default values.
+ * reg is masked with mask, the OR:ed with an (again masked)
+ * val shifted sb steps to the left.
+ */
+#define SSP_WRITE_BITS(reg, val, mask, sb) \
+ ((reg) = (((reg) & ~(mask)) | (((val)<<(sb)) & (mask))))
+
+/*
+ * This macro is also used to define some default values.
+ * It will just shift val by sb steps to the left and mask
+ * the result with mask.
+ */
+#define GEN_MASK_BITS(val, mask, sb) \
+ (((val)<<(sb)) & (mask))
+
+#define DRIVE_TX 0
+#define DO_NOT_DRIVE_TX 1
+
+#define DO_NOT_QUEUE_DMA 0
+#define QUEUE_DMA 1
+
+#define RX_TRANSFER 1
+#define TX_TRANSFER 2
+
+/*
+ * Macros to access SSP Registers with their offsets
+ */
+#define SSP_CR0(r) (r + 0x000)
+#define SSP_CR1(r) (r + 0x004)
+#define SSP_DR(r) (r + 0x008)
+#define SSP_SR(r) (r + 0x00C)
+#define SSP_CPSR(r) (r + 0x010)
+#define SSP_IMSC(r) (r + 0x014)
+#define SSP_RIS(r) (r + 0x018)
+#define SSP_MIS(r) (r + 0x01C)
+#define SSP_ICR(r) (r + 0x020)
+#define SSP_DMACR(r) (r + 0x024)
+#define SSP_ITCR(r) (r + 0x080)
+#define SSP_ITIP(r) (r + 0x084)
+#define SSP_ITOP(r) (r + 0x088)
+#define SSP_TDR(r) (r + 0x08C)
+
+#define SSP_PID0(r) (r + 0xFE0)
+#define SSP_PID1(r) (r + 0xFE4)
+#define SSP_PID2(r) (r + 0xFE8)
+#define SSP_PID3(r) (r + 0xFEC)
+
+#define SSP_CID0(r) (r + 0xFF0)
+#define SSP_CID1(r) (r + 0xFF4)
+#define SSP_CID2(r) (r + 0xFF8)
+#define SSP_CID3(r) (r + 0xFFC)
+
+/*
+ * SSP Control Register 0 - SSP_CR0
+ */
+#define SSP_CR0_MASK_DSS (0x1FUL << 0)
+#define SSP_CR0_MASK_HALFDUP (0x1UL << 5)
+#define SSP_CR0_MASK_SPO (0x1UL << 6)
+#define SSP_CR0_MASK_SPH (0x1UL << 7)
+#define SSP_CR0_MASK_SCR (0xFFUL << 8)
+#define SSP_CR0_MASK_CSS (0x1FUL << 16)
+#define SSP_CR0_MASK_FRF (0x3UL << 21)
+
+/*
+ * SSP Control Register 0 - SSP_CR1
+ */
+#define SSP_CR1_MASK_LBM (0x1UL << 0)
+#define SSP_CR1_MASK_SSE (0x1UL << 1)
+#define SSP_CR1_MASK_MS (0x1UL << 2)
+#define SSP_CR1_MASK_SOD (0x1UL << 3)
+#define SSP_CR1_MASK_RENDN (0x1UL << 4)
+#define SSP_CR1_MASK_TENDN (0x1UL << 5)
+#define SSP_CR1_MASK_MWAIT (0x1UL << 6)
+#define SSP_CR1_MASK_RXIFLSEL (0x7UL << 7)
+#define SSP_CR1_MASK_TXIFLSEL (0x7UL << 10)
+
+/*
+ * SSP Data Register - SSP_DR
+ */
+#define SSP_DR_MASK_DATA 0xFFFFFFFF
+
+/*
+ * SSP Status Register - SSP_SR
+ */
+#define SSP_SR_MASK_TFE (0x1UL << 0) /* Transmit FIFO empty */
+#define SSP_SR_MASK_TNF (0x1UL << 1) /* Transmit FIFO not full */
+#define SSP_SR_MASK_RNE (0x1UL << 2) /* Receive FIFO not empty */
+#define SSP_SR_MASK_RFF (0x1UL << 3) /* Receive FIFO full */
+#define SSP_SR_MASK_BSY (0x1UL << 4) /* Busy Flag */
+
+/*
+ * SSP Clock Prescale Register - SSP_CPSR
+ */
+#define SSP_CPSR_MASK_CPSDVSR (0xFFUL << 0)
+
+/*
+ * SSP Interrupt Mask Set/Clear Register - SSP_IMSC
+ */
+#define SSP_IMSC_MASK_RORIM (0x1UL << 0) /* Receive Overrun Interrupt mask */
+#define SSP_IMSC_MASK_RTIM (0x1UL << 1) /* Receive timeout Interrupt mask */
+#define SSP_IMSC_MASK_RXIM (0x1UL << 2) /* Receive FIFO Interrupt mask */
+#define SSP_IMSC_MASK_TXIM (0x1UL << 3) /* Transmit FIFO Interrupt mask */
+
+/*
+ * SSP Raw Interrupt Status Register - SSP_RIS
+ */
+/* Receive Overrun Raw Interrupt status */
+#define SSP_RIS_MASK_RORRIS (0x1UL << 0)
+/* Receive Timeout Raw Interrupt status */
+#define SSP_RIS_MASK_RTRIS (0x1UL << 1)
+/* Receive FIFO Raw Interrupt status */
+#define SSP_RIS_MASK_RXRIS (0x1UL << 2)
+/* Transmit FIFO Raw Interrupt status */
+#define SSP_RIS_MASK_TXRIS (0x1UL << 3)
+
+/*
+ * SSP Masked Interrupt Status Register - SSP_MIS
+ */
+/* Receive Overrun Masked Interrupt status */
+#define SSP_MIS_MASK_RORMIS (0x1UL << 0)
+/* Receive Timeout Masked Interrupt status */
+#define SSP_MIS_MASK_RTMIS (0x1UL << 1)
+/* Receive FIFO Masked Interrupt status */
+#define SSP_MIS_MASK_RXMIS (0x1UL << 2)
+/* Transmit FIFO Masked Interrupt status */
+#define SSP_MIS_MASK_TXMIS (0x1UL << 3)
+
+/*
+ * SSP Interrupt Clear Register - SSP_ICR
+ */
+/* Receive Overrun Raw Clear Interrupt bit */
+#define SSP_ICR_MASK_RORIC (0x1UL << 0)
+/* Receive Timeout Clear Interrupt bit */
+#define SSP_ICR_MASK_RTIC (0x1UL << 1)
+
+/*
+ * SSP DMA Control Register - SSP_DMACR
+ */
+/* Receive DMA Enable bit */
+#define SSP_DMACR_MASK_RXDMAE (0x1UL << 0)
+/* Transmit DMA Enable bit */
+#define SSP_DMACR_MASK_TXDMAE (0x1UL << 1)
+
+/*
+ * SSP Integration Test control Register - SSP_ITCR
+ */
+#define SSP_ITCR_MASK_ITEN (0x1UL << 0)
+#define SSP_ITCR_MASK_TESTFIFO (0x1UL << 1)
+
+/*
+ * SSP Integration Test Input Register - SSP_ITIP
+ */
+#define ITIP_MASK_SSPRXD (0x1UL << 0)
+#define ITIP_MASK_SSPFSSIN (0x1UL << 1)
+#define ITIP_MASK_SSPCLKIN (0x1UL << 2)
+#define ITIP_MASK_RXDMAC (0x1UL << 3)
+#define ITIP_MASK_TXDMAC (0x1UL << 4)
+#define ITIP_MASK_SSPTXDIN (0x1UL << 5)
+
+/*
+ * SSP Integration Test output Register - SSP_ITOP
+ */
+#define ITOP_MASK_SSPTXD (0x1UL << 0)
+#define ITOP_MASK_SSPFSSOUT (0x1UL << 1)
+#define ITOP_MASK_SSPCLKOUT (0x1UL << 2)
+#define ITOP_MASK_SSPOEn (0x1UL << 3)
+#define ITOP_MASK_SSPCTLOEn (0x1UL << 4)
+#define ITOP_MASK_RORINTR (0x1UL << 5)
+#define ITOP_MASK_RTINTR (0x1UL << 6)
+#define ITOP_MASK_RXINTR (0x1UL << 7)
+#define ITOP_MASK_TXINTR (0x1UL << 8)
+#define ITOP_MASK_INTR (0x1UL << 9)
+#define ITOP_MASK_RXDMABREQ (0x1UL << 10)
+#define ITOP_MASK_RXDMASREQ (0x1UL << 11)
+#define ITOP_MASK_TXDMABREQ (0x1UL << 12)
+#define ITOP_MASK_TXDMASREQ (0x1UL << 13)
+
+/*
+ * SSP Test Data Register - SSP_TDR
+ */
+#define TDR_MASK_TESTDATA (0xFFFFFFFF)
+
+/*
+ * Message State
+ * we use the spi_message.state (void *) pointer to
+ * hold a single state value, that's why all this
+ * (void *) casting is done here.
+ */
+#define STATE_START ((void *) 0)
+#define STATE_RUNNING ((void *) 1)
+#define STATE_DONE ((void *) 2)
+#define STATE_ERROR ((void *) -1)
+
+/*
+ * Queue State
+ */
+#define QUEUE_RUNNING (0)
+#define QUEUE_STOPPED (1)
+/*
+ * SSP State - Whether Enabled or Disabled
+ */
+#define SSP_DISABLED (0)
+#define SSP_ENABLED (1)
+
+/*
+ * SSP DMA State - Whether DMA Enabled or Disabled
+ */
+#define SSP_DMA_DISABLED (0)
+#define SSP_DMA_ENABLED (1)
+
+/*
+ * SSP Clock Defaults
+ */
+#define NMDK_SSP_DEFAULT_CLKRATE 0x2
+#define NMDK_SSP_DEFAULT_PRESCALE 0x40
+
+/*
+ * SSP Clock Parameter ranges
+ */
+#define CPSDVR_MIN 0x02
+#define CPSDVR_MAX 0xFE
+#define SCR_MIN 0x00
+#define SCR_MAX 0xFF
+
+/*
+ * SSP Interrupt related Macros
+ */
+#define DEFAULT_SSP_REG_IMSC 0x0UL
+#define DISABLE_ALL_INTERRUPTS DEFAULT_SSP_REG_IMSC
+#define ENABLE_ALL_INTERRUPTS (~DEFAULT_SSP_REG_IMSC)
+
+#define CLEAR_ALL_INTERRUPTS 0x3
+
+
+/*
+ * The type of reading going on on this chip
+ */
+enum ssp_reading {
+ READING_NULL,
+ READING_U8,
+ READING_U16,
+ READING_U32
+};
+
+/**
+ * The type of writing going on on this chip
+ */
+enum ssp_writing {
+ WRITING_NULL,
+ WRITING_U8,
+ WRITING_U16,
+ WRITING_U32
+};
+
+/**
+ * struct vendor_data - vendor-specific config parameters
+ * for PL022 derivates
+ * @fifodepth: depth of FIFOs (both)
+ * @max_bpw: maximum number of bits per word
+ * @unidir: supports unidirection transfers
+ */
+struct vendor_data {
+ int fifodepth;
+ int max_bpw;
+ bool unidir;
+};
+
+/**
+ * struct pl022 - This is the private SSP driver data structure
+ * @adev: AMBA device model hookup
+ * @phybase: The physical memory where the SSP device resides
+ * @virtbase: The virtual memory where the SSP is mapped
+ * @master: SPI framework hookup
+ * @master_info: controller-specific data from machine setup
+ * @regs: SSP controller register's virtual address
+ * @pump_messages: Work struct for scheduling work to the workqueue
+ * @lock: spinlock to syncronise access to driver data
+ * @workqueue: a workqueue on which any spi_message request is queued
+ * @busy: workqueue is busy
+ * @run: workqueue is running
+ * @pump_transfers: Tasklet used in Interrupt Transfer mode
+ * @cur_msg: Pointer to current spi_message being processed
+ * @cur_transfer: Pointer to current spi_transfer
+ * @cur_chip: pointer to current clients chip(assigned from controller_state)
+ * @tx: current position in TX buffer to be read
+ * @tx_end: end position in TX buffer to be read
+ * @rx: current position in RX buffer to be written
+ * @rx_end: end position in RX buffer to be written
+ * @readingtype: the type of read currently going on
+ * @writingtype: the type or write currently going on
+ */
+struct pl022 {
+ struct amba_device *adev;
+ struct vendor_data *vendor;
+ resource_size_t phybase;
+ void __iomem *virtbase;
+ struct clk *clk;
+ struct spi_master *master;
+ struct pl022_ssp_controller *master_info;
+ /* Driver message queue */
+ struct workqueue_struct *workqueue;
+ struct work_struct pump_messages;
+ spinlock_t queue_lock;
+ struct list_head queue;
+ int busy;
+ int run;
+ /* Message transfer pump */
+ struct tasklet_struct pump_transfers;
+ struct spi_message *cur_msg;
+ struct spi_transfer *cur_transfer;
+ struct chip_data *cur_chip;
+ void *tx;
+ void *tx_end;
+ void *rx;
+ void *rx_end;
+ enum ssp_reading read;
+ enum ssp_writing write;
+};
+
+/**
+ * struct chip_data - To maintain runtime state of SSP for each client chip
+ * @cr0: Value of control register CR0 of SSP
+ * @cr1: Value of control register CR1 of SSP
+ * @dmacr: Value of DMA control Register of SSP
+ * @cpsr: Value of Clock prescale register
+ * @n_bytes: how many bytes(power of 2) reqd for a given data width of client
+ * @enable_dma: Whether to enable DMA or not
+ * @write: function ptr to be used to write when doing xfer for this chip
+ * @read: function ptr to be used to read when doing xfer for this chip
+ * @cs_control: chip select callback provided by chip
+ * @xfer_type: polling/interrupt/DMA
+ *
+ * Runtime state of the SSP controller, maintained per chip,
+ * This would be set according to the current message that would be served
+ */
+struct chip_data {
+ u16 cr0;
+ u16 cr1;
+ u16 dmacr;
+ u16 cpsr;
+ u8 n_bytes;
+ u8 enable_dma:1;
+ enum ssp_reading read;
+ enum ssp_writing write;
+ void (*cs_control) (u32 command);
+ int xfer_type;
+};
+
+/**
+ * null_cs_control - Dummy chip select function
+ * @command: select/delect the chip
+ *
+ * If no chip select function is provided by client this is used as dummy
+ * chip select
+ */
+static void null_cs_control(u32 command)
+{
+ pr_debug("pl022: dummy chip select control, CS=0x%x\n", command);
+}
+
+/**
+ * giveback - current spi_message is over, schedule next message and call
+ * callback of this message. Assumes that caller already
+ * set message->status; dma and pio irqs are blocked
+ * @pl022: SSP driver private data structure
+ */
+static void giveback(struct pl022 *pl022)
+{
+ struct spi_transfer *last_transfer;
+ unsigned long flags;
+ struct spi_message *msg;
+ void (*curr_cs_control) (u32 command);
+
+ /*
+ * This local reference to the chip select function
+ * is needed because we set curr_chip to NULL
+ * as a step toward termininating the message.
+ */
+ curr_cs_control = pl022->cur_chip->cs_control;
+ spin_lock_irqsave(&pl022->queue_lock, flags);
+ msg = pl022->cur_msg;
+ pl022->cur_msg = NULL;
+ pl022->cur_transfer = NULL;
+ pl022->cur_chip = NULL;
+ queue_work(pl022->workqueue, &pl022->pump_messages);
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+ last_transfer = list_entry(msg->transfers.prev,
+ struct spi_transfer,
+ transfer_list);
+
+ /* Delay if requested before any change in chip select */
+ if (last_transfer->delay_usecs)
+ /*
+ * FIXME: This runs in interrupt context.
+ * Is this really smart?
+ */
+ udelay(last_transfer->delay_usecs);
+
+ /*
+ * Drop chip select UNLESS cs_change is true or we are returning
+ * a message with an error, or next message is for another chip
+ */
+ if (!last_transfer->cs_change)
+ curr_cs_control(SSP_CHIP_DESELECT);
+ else {
+ struct spi_message *next_msg;
+
+ /* Holding of cs was hinted, but we need to make sure
+ * the next message is for the same chip. Don't waste
+ * time with the following tests unless this was hinted.
+ *
+ * We cannot postpone this until pump_messages, because
+ * after calling msg->complete (below) the driver that
+ * sent the current message could be unloaded, which
+ * could invalidate the cs_control() callback...
+ */
+
+ /* get a pointer to the next message, if any */
+ spin_lock_irqsave(&pl022->queue_lock, flags);
+ if (list_empty(&pl022->queue))
+ next_msg = NULL;
+ else
+ next_msg = list_entry(pl022->queue.next,
+ struct spi_message, queue);
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+ /* see if the next and current messages point
+ * to the same chip
+ */
+ if (next_msg && next_msg->spi != msg->spi)
+ next_msg = NULL;
+ if (!next_msg || msg->state == STATE_ERROR)
+ curr_cs_control(SSP_CHIP_DESELECT);
+ }
+ msg->state = NULL;
+ if (msg->complete)
+ msg->complete(msg->context);
+ /* This message is completed, so let's turn off the clock! */
+ clk_disable(pl022->clk);
+}
+
+/**
+ * flush - flush the FIFO to reach a clean state
+ * @pl022: SSP driver private data structure
+ */
+static int flush(struct pl022 *pl022)
+{
+ unsigned long limit = loops_per_jiffy << 1;
+
+ dev_dbg(&pl022->adev->dev, "flush\n");
+ do {
+ while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+ readw(SSP_DR(pl022->virtbase));
+ } while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--);
+ return limit;
+}
+
+/**
+ * restore_state - Load configuration of current chip
+ * @pl022: SSP driver private data structure
+ */
+static void restore_state(struct pl022 *pl022)
+{
+ struct chip_data *chip = pl022->cur_chip;
+
+ writew(chip->cr0, SSP_CR0(pl022->virtbase));
+ writew(chip->cr1, SSP_CR1(pl022->virtbase));
+ writew(chip->dmacr, SSP_DMACR(pl022->virtbase));
+ writew(chip->cpsr, SSP_CPSR(pl022->virtbase));
+ writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+ writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+}
+
+/**
+ * load_ssp_default_config - Load default configuration for SSP
+ * @pl022: SSP driver private data structure
+ */
+
+/*
+ * Default SSP Register Values
+ */
+#define DEFAULT_SSP_REG_CR0 ( \
+ GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0) | \
+ GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP, 5) | \
+ GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \
+ GEN_MASK_BITS(SSP_CLK_FALLING_EDGE, SSP_CR0_MASK_SPH, 7) | \
+ GEN_MASK_BITS(NMDK_SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \
+ GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS, 16) | \
+ GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 21) \
+)
+
+#define DEFAULT_SSP_REG_CR1 ( \
+ GEN_MASK_BITS(LOOPBACK_DISABLED, SSP_CR1_MASK_LBM, 0) | \
+ GEN_MASK_BITS(SSP_DISABLED, SSP_CR1_MASK_SSE, 1) | \
+ GEN_MASK_BITS(SSP_MASTER, SSP_CR1_MASK_MS, 2) | \
+ GEN_MASK_BITS(DO_NOT_DRIVE_TX, SSP_CR1_MASK_SOD, 3) | \
+ GEN_MASK_BITS(SSP_RX_MSB, SSP_CR1_MASK_RENDN, 4) | \
+ GEN_MASK_BITS(SSP_TX_MSB, SSP_CR1_MASK_TENDN, 5) | \
+ GEN_MASK_BITS(SSP_MWIRE_WAIT_ZERO, SSP_CR1_MASK_MWAIT, 6) |\
+ GEN_MASK_BITS(SSP_RX_1_OR_MORE_ELEM, SSP_CR1_MASK_RXIFLSEL, 7) | \
+ GEN_MASK_BITS(SSP_TX_1_OR_MORE_EMPTY_LOC, SSP_CR1_MASK_TXIFLSEL, 10) \
+)
+
+#define DEFAULT_SSP_REG_CPSR ( \
+ GEN_MASK_BITS(NMDK_SSP_DEFAULT_PRESCALE, SSP_CPSR_MASK_CPSDVSR, 0) \
+)
+
+#define DEFAULT_SSP_REG_DMACR (\
+ GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_RXDMAE, 0) | \
+ GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_TXDMAE, 1) \
+)
+
+
+static void load_ssp_default_config(struct pl022 *pl022)
+{
+ writew(DEFAULT_SSP_REG_CR0, SSP_CR0(pl022->virtbase));
+ writew(DEFAULT_SSP_REG_CR1, SSP_CR1(pl022->virtbase));
+ writew(DEFAULT_SSP_REG_DMACR, SSP_DMACR(pl022->virtbase));
+ writew(DEFAULT_SSP_REG_CPSR, SSP_CPSR(pl022->virtbase));
+ writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+ writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+}
+
+/**
+ * This will write to TX and read from RX according to the parameters
+ * set in pl022.
+ */
+static void readwriter(struct pl022 *pl022)
+{
+
+ /*
+ * The FIFO depth is different inbetween primecell variants.
+ * I believe filling in too much in the FIFO might cause
+ * errons in 8bit wide transfers on ARM variants (just 8 words
+ * FIFO, means only 8x8 = 64 bits in FIFO) at least.
+ *
+ * FIXME: currently we have no logic to account for this.
+ * perhaps there is even something broken in HW regarding
+ * 8bit transfers (it doesn't fail on 16bit) so this needs
+ * more investigation...
+ */
+ dev_dbg(&pl022->adev->dev,
+ "%s, rx: %p, rxend: %p, tx: %p, txend: %p\n",
+ __func__, pl022->rx, pl022->rx_end, pl022->tx, pl022->tx_end);
+
+ /* Read as much as you can */
+ while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+ && (pl022->rx < pl022->rx_end)) {
+ switch (pl022->read) {
+ case READING_NULL:
+ readw(SSP_DR(pl022->virtbase));
+ break;
+ case READING_U8:
+ *(u8 *) (pl022->rx) =
+ readw(SSP_DR(pl022->virtbase)) & 0xFFU;
+ break;
+ case READING_U16:
+ *(u16 *) (pl022->rx) =
+ (u16) readw(SSP_DR(pl022->virtbase));
+ break;
+ case READING_U32:
+ *(u32 *) (pl022->rx) =
+ readl(SSP_DR(pl022->virtbase));
+ break;
+ }
+ pl022->rx += (pl022->cur_chip->n_bytes);
+ }
+ /*
+ * Write as much as you can, while keeping an eye on the RX FIFO!
+ */
+ while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+ && (pl022->tx < pl022->tx_end)) {
+ switch (pl022->write) {
+ case WRITING_NULL:
+ writew(0x0, SSP_DR(pl022->virtbase));
+ break;
+ case WRITING_U8:
+ writew(*(u8 *) (pl022->tx), SSP_DR(pl022->virtbase));
+ break;
+ case WRITING_U16:
+ writew((*(u16 *) (pl022->tx)), SSP_DR(pl022->virtbase));
+ break;
+ case WRITING_U32:
+ writel(*(u32 *) (pl022->tx), SSP_DR(pl022->virtbase));
+ break;
+ }
+ pl022->tx += (pl022->cur_chip->n_bytes);
+ /*
+ * This inner reader takes care of things appearing in the RX
+ * FIFO as we're transmitting. This will happen a lot since the
+ * clock starts running when you put things into the TX FIFO,
+ * and then things are continously clocked into the RX FIFO.
+ */
+ while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+ && (pl022->rx < pl022->rx_end)) {
+ switch (pl022->read) {
+ case READING_NULL:
+ readw(SSP_DR(pl022->virtbase));
+ break;
+ case READING_U8:
+ *(u8 *) (pl022->rx) =
+ readw(SSP_DR(pl022->virtbase)) & 0xFFU;
+ break;
+ case READING_U16:
+ *(u16 *) (pl022->rx) =
+ (u16) readw(SSP_DR(pl022->virtbase));
+ break;
+ case READING_U32:
+ *(u32 *) (pl022->rx) =
+ readl(SSP_DR(pl022->virtbase));
+ break;
+ }
+ pl022->rx += (pl022->cur_chip->n_bytes);
+ }
+ }
+ /*
+ * When we exit here the TX FIFO should be full and the RX FIFO
+ * should be empty
+ */
+}
+
+
+/**
+ * next_transfer - Move to the Next transfer in the current spi message
+ * @pl022: SSP driver private data structure
+ *
+ * This function moves though the linked list of spi transfers in the
+ * current spi message and returns with the state of current spi
+ * message i.e whether its last transfer is done(STATE_DONE) or
+ * Next transfer is ready(STATE_RUNNING)
+ */
+static void *next_transfer(struct pl022 *pl022)
+{
+ struct spi_message *msg = pl022->cur_msg;
+ struct spi_transfer *trans = pl022->cur_transfer;
+
+ /* Move to next transfer */
+ if (trans->transfer_list.next != &msg->transfers) {
+ pl022->cur_transfer =
+ list_entry(trans->transfer_list.next,
+ struct spi_transfer, transfer_list);
+ return STATE_RUNNING;
+ }
+ return STATE_DONE;
+}
+/**
+ * pl022_interrupt_handler - Interrupt handler for SSP controller
+ *
+ * This function handles interrupts generated for an interrupt based transfer.
+ * If a receive overrun (ROR) interrupt is there then we disable SSP, flag the
+ * current message's state as STATE_ERROR and schedule the tasklet
+ * pump_transfers which will do the postprocessing of the current message by
+ * calling giveback(). Otherwise it reads data from RX FIFO till there is no
+ * more data, and writes data in TX FIFO till it is not full. If we complete
+ * the transfer we move to the next transfer and schedule the tasklet.
+ */
+static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
+{
+ struct pl022 *pl022 = dev_id;
+ struct spi_message *msg = pl022->cur_msg;
+ u16 irq_status = 0;
+ u16 flag = 0;
+
+ if (unlikely(!msg)) {
+ dev_err(&pl022->adev->dev,
+ "bad message state in interrupt handler");
+ /* Never fail */
+ return IRQ_HANDLED;
+ }
+
+ /* Read the Interrupt Status Register */
+ irq_status = readw(SSP_MIS(pl022->virtbase));
+
+ if (unlikely(!irq_status))
+ return IRQ_NONE;
+
+ /* This handles the error code interrupts */
+ if (unlikely(irq_status & SSP_MIS_MASK_RORMIS)) {
+ /*
+ * Overrun interrupt - bail out since our Data has been
+ * corrupted
+ */
+ dev_err(&pl022->adev->dev,
+ "FIFO overrun\n");
+ if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF)
+ dev_err(&pl022->adev->dev,
+ "RXFIFO is full\n");
+ if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+ dev_err(&pl022->adev->dev,
+ "TXFIFO is full\n");
+
+ /*
+ * Disable and clear interrupts, disable SSP,
+ * mark message with bad status so it can be
+ * retried.
+ */
+ writew(DISABLE_ALL_INTERRUPTS,
+ SSP_IMSC(pl022->virtbase));
+ writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+ writew((readw(SSP_CR1(pl022->virtbase)) &
+ (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
+ msg->state = STATE_ERROR;
+
+ /* Schedule message queue handler */
+ tasklet_schedule(&pl022->pump_transfers);
+ return IRQ_HANDLED;
+ }
+
+ readwriter(pl022);
+
+ if ((pl022->tx == pl022->tx_end) && (flag == 0)) {
+ flag = 1;
+ /* Disable Transmit interrupt */
+ writew(readw(SSP_IMSC(pl022->virtbase)) &
+ (~SSP_IMSC_MASK_TXIM),
+ SSP_IMSC(pl022->virtbase));
+ }
+
+ /*
+ * Since all transactions must write as much as shall be read,
+ * we can conclude the entire transaction once RX is complete.
+ * At this point, all TX will always be finished.
+ */
+ if (pl022->rx >= pl022->rx_end) {
+ writew(DISABLE_ALL_INTERRUPTS,
+ SSP_IMSC(pl022->virtbase));
+ writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+ if (unlikely(pl022->rx > pl022->rx_end)) {
+ dev_warn(&pl022->adev->dev, "read %u surplus "
+ "bytes (did you request an odd "
+ "number of bytes on a 16bit bus?)\n",
+ (u32) (pl022->rx - pl022->rx_end));
+ }
+ /* Update total bytes transfered */
+ msg->actual_length += pl022->cur_transfer->len;
+ if (pl022->cur_transfer->cs_change)
+ pl022->cur_chip->
+ cs_control(SSP_CHIP_DESELECT);
+ /* Move to next transfer */
+ msg->state = next_transfer(pl022);
+ tasklet_schedule(&pl022->pump_transfers);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * This sets up the pointers to memory for the next message to
+ * send out on the SPI bus.
+ */
+static int set_up_next_transfer(struct pl022 *pl022,
+ struct spi_transfer *transfer)
+{
+ int residue;
+
+ /* Sanity check the message for this bus width */
+ residue = pl022->cur_transfer->len % pl022->cur_chip->n_bytes;
+ if (unlikely(residue != 0)) {
+ dev_err(&pl022->adev->dev,
+ "message of %u bytes to transmit but the current "
+ "chip bus has a data width of %u bytes!\n",
+ pl022->cur_transfer->len,
+ pl022->cur_chip->n_bytes);
+ dev_err(&pl022->adev->dev, "skipping this message\n");
+ return -EIO;
+ }
+ pl022->tx = (void *)transfer->tx_buf;
+ pl022->tx_end = pl022->tx + pl022->cur_transfer->len;
+ pl022->rx = (void *)transfer->rx_buf;
+ pl022->rx_end = pl022->rx + pl022->cur_transfer->len;
+ pl022->write =
+ pl022->tx ? pl022->cur_chip->write : WRITING_NULL;
+ pl022->read = pl022->rx ? pl022->cur_chip->read : READING_NULL;
+ return 0;
+}
+
+/**
+ * pump_transfers - Tasklet function which schedules next interrupt transfer
+ * when running in interrupt transfer mode.
+ * @data: SSP driver private data structure
+ *
+ */
+static void pump_transfers(unsigned long data)
+{
+ struct pl022 *pl022 = (struct pl022 *) data;
+ struct spi_message *message = NULL;
+ struct spi_transfer *transfer = NULL;
+ struct spi_transfer *previous = NULL;
+
+ /* Get current state information */
+ message = pl022->cur_msg;
+ transfer = pl022->cur_transfer;
+
+ /* Handle for abort */
+ if (message->state == STATE_ERROR) {
+ message->status = -EIO;
+ giveback(pl022);
+ return;
+ }
+
+ /* Handle end of message */
+ if (message->state == STATE_DONE) {
+ message->status = 0;
+ giveback(pl022);
+ return;
+ }
+
+ /* Delay if requested at end of transfer before CS change */
+ if (message->state == STATE_RUNNING) {
+ previous = list_entry(transfer->transfer_list.prev,
+ struct spi_transfer,
+ transfer_list);
+ if (previous->delay_usecs)
+ /*
+ * FIXME: This runs in interrupt context.
+ * Is this really smart?
+ */
+ udelay(previous->delay_usecs);
+
+ /* Drop chip select only if cs_change is requested */
+ if (previous->cs_change)
+ pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+ } else {
+ /* STATE_START */
+ message->state = STATE_RUNNING;
+ }
+
+ if (set_up_next_transfer(pl022, transfer)) {
+ message->state = STATE_ERROR;
+ message->status = -EIO;
+ giveback(pl022);
+ return;
+ }
+ /* Flush the FIFOs and let's go! */
+ flush(pl022);
+ writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+}
+
+/**
+ * NOT IMPLEMENTED
+ * configure_dma - It configures the DMA pipes for DMA transfers
+ * @data: SSP driver's private data structure
+ *
+ */
+static int configure_dma(void *data)
+{
+ struct pl022 *pl022 = data;
+ dev_dbg(&pl022->adev->dev, "configure DMA\n");
+ return -ENOTSUPP;
+}
+
+/**
+ * do_dma_transfer - It handles transfers of the current message
+ * if it is DMA xfer.
+ * NOT FULLY IMPLEMENTED
+ * @data: SSP driver's private data structure
+ */
+static void do_dma_transfer(void *data)
+{
+ struct pl022 *pl022 = data;
+
+ if (configure_dma(data)) {
+ dev_dbg(&pl022->adev->dev, "configuration of DMA Failed!\n");
+ goto err_config_dma;
+ }
+
+ /* TODO: Implememt DMA setup of pipes here */
+
+ /* Enable target chip, set up transfer */
+ pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+ if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
+ /* Error path */
+ pl022->cur_msg->state = STATE_ERROR;
+ pl022->cur_msg->status = -EIO;
+ giveback(pl022);
+ return;
+ }
+ /* Enable SSP */
+ writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+ SSP_CR1(pl022->virtbase));
+
+ /* TODO: Enable the DMA transfer here */
+ return;
+
+ err_config_dma:
+ pl022->cur_msg->state = STATE_ERROR;
+ pl022->cur_msg->status = -EIO;
+ giveback(pl022);
+ return;
+}
+
+static void do_interrupt_transfer(void *data)
+{
+ struct pl022 *pl022 = data;
+
+ /* Enable target chip */
+ pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+ if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
+ /* Error path */
+ pl022->cur_msg->state = STATE_ERROR;
+ pl022->cur_msg->status = -EIO;
+ giveback(pl022);
+ return;
+ }
+ /* Enable SSP, turn on interrupts */
+ writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+ SSP_CR1(pl022->virtbase));
+ writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+}
+
+static void do_polling_transfer(void *data)
+{
+ struct pl022 *pl022 = data;
+ struct spi_message *message = NULL;
+ struct spi_transfer *transfer = NULL;
+ struct spi_transfer *previous = NULL;
+ struct chip_data *chip;
+
+ chip = pl022->cur_chip;
+ message = pl022->cur_msg;
+
+ while (message->state != STATE_DONE) {
+ /* Handle for abort */
+ if (message->state == STATE_ERROR)
+ break;
+ transfer = pl022->cur_transfer;
+
+ /* Delay if requested at end of transfer */
+ if (message->state == STATE_RUNNING) {
+ previous =
+ list_entry(transfer->transfer_list.prev,
+ struct spi_transfer, transfer_list);
+ if (previous->delay_usecs)
+ udelay(previous->delay_usecs);
+ if (previous->cs_change)
+ pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+ } else {
+ /* STATE_START */
+ message->state = STATE_RUNNING;
+ pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+ }
+
+ /* Configuration Changing Per Transfer */
+ if (set_up_next_transfer(pl022, transfer)) {
+ /* Error path */
+ message->state = STATE_ERROR;
+ break;
+ }
+ /* Flush FIFOs and enable SSP */
+ flush(pl022);
+ writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+ SSP_CR1(pl022->virtbase));
+
+ dev_dbg(&pl022->adev->dev, "POLLING TRANSFER ONGOING ... \n");
+ /* FIXME: insert a timeout so we don't hang here indefinately */
+ while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end)
+ readwriter(pl022);
+
+ /* Update total byte transfered */
+ message->actual_length += pl022->cur_transfer->len;
+ if (pl022->cur_transfer->cs_change)
+ pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
+ /* Move to next transfer */
+ message->state = next_transfer(pl022);
+ }
+
+ /* Handle end of message */
+ if (message->state == STATE_DONE)
+ message->status = 0;
+ else
+ message->status = -EIO;
+
+ giveback(pl022);
+ return;
+}
+
+/**
+ * pump_messages - Workqueue function which processes spi message queue
+ * @data: pointer to private data of SSP driver
+ *
+ * This function checks if there is any spi message in the queue that
+ * needs processing and delegate control to appropriate function
+ * do_polling_transfer()/do_interrupt_transfer()/do_dma_transfer()
+ * based on the kind of the transfer
+ *
+ */
+static void pump_messages(struct work_struct *work)
+{
+ struct pl022 *pl022 =
+ container_of(work, struct pl022, pump_messages);
+ unsigned long flags;
+
+ /* Lock queue and check for queue work */
+ spin_lock_irqsave(&pl022->queue_lock, flags);
+ if (list_empty(&pl022->queue) || pl022->run == QUEUE_STOPPED) {
+ pl022->busy = 0;
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+ return;
+ }
+ /* Make sure we are not already running a message */
+ if (pl022->cur_msg) {
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+ return;
+ }
+ /* Extract head of queue */
+ pl022->cur_msg =
+ list_entry(pl022->queue.next, struct spi_message, queue);
+
+ list_del_init(&pl022->cur_msg->queue);
+ pl022->busy = 1;
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+ /* Initial message state */
+ pl022->cur_msg->state = STATE_START;
+ pl022->cur_transfer = list_entry(pl022->cur_msg->transfers.next,
+ struct spi_transfer,
+ transfer_list);
+
+ /* Setup the SPI using the per chip configuration */
+ pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi);
+ /*
+ * We enable the clock here, then the clock will be disabled when
+ * giveback() is called in each method (poll/interrupt/DMA)
+ */
+ clk_enable(pl022->clk);
+ restore_state(pl022);
+ flush(pl022);
+
+ if (pl022->cur_chip->xfer_type == POLLING_TRANSFER)
+ do_polling_transfer(pl022);
+ else if (pl022->cur_chip->xfer_type == INTERRUPT_TRANSFER)
+ do_interrupt_transfer(pl022);
+ else
+ do_dma_transfer(pl022);
+}
+
+
+static int __init init_queue(struct pl022 *pl022)
+{
+ INIT_LIST_HEAD(&pl022->queue);
+ spin_lock_init(&pl022->queue_lock);
+
+ pl022->run = QUEUE_STOPPED;
+ pl022->busy = 0;
+
+ tasklet_init(&pl022->pump_transfers,
+ pump_transfers, (unsigned long)pl022);
+
+ INIT_WORK(&pl022->pump_messages, pump_messages);
+ pl022->workqueue = create_singlethread_workqueue(
+ dev_name(pl022->master->dev.parent));
+ if (pl022->workqueue == NULL)
+ return -EBUSY;
+
+ return 0;
+}
+
+
+static int start_queue(struct pl022 *pl022)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pl022->queue_lock, flags);
+
+ if (pl022->run == QUEUE_RUNNING || pl022->busy) {
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+ return -EBUSY;
+ }
+
+ pl022->run = QUEUE_RUNNING;
+ pl022->cur_msg = NULL;
+ pl022->cur_transfer = NULL;
+ pl022->cur_chip = NULL;
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+ queue_work(pl022->workqueue, &pl022->pump_messages);
+
+ return 0;
+}
+
+
+static int stop_queue(struct pl022 *pl022)
+{
+ unsigned long flags;
+ unsigned limit = 500;
+ int status = 0;
+
+ spin_lock_irqsave(&pl022->queue_lock, flags);
+
+ /* This is a bit lame, but is optimized for the common execution path.
+ * A wait_queue on the pl022->busy could be used, but then the common
+ * execution path (pump_messages) would be required to call wake_up or
+ * friends on every SPI message. Do this instead */
+ pl022->run = QUEUE_STOPPED;
+ while (!list_empty(&pl022->queue) && pl022->busy && limit--) {
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+ msleep(10);
+ spin_lock_irqsave(&pl022->queue_lock, flags);
+ }
+
+ if (!list_empty(&pl022->queue) || pl022->busy)
+ status = -EBUSY;
+
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+ return status;
+}
+
+static int destroy_queue(struct pl022 *pl022)
+{
+ int status;
+
+ status = stop_queue(pl022);
+ /* we are unloading the module or failing to load (only two calls
+ * to this routine), and neither call can handle a return value.
+ * However, destroy_workqueue calls flush_workqueue, and that will
+ * block until all work is done. If the reason that stop_queue
+ * timed out is that the work will never finish, then it does no
+ * good to call destroy_workqueue, so return anyway. */
+ if (status != 0)
+ return status;
+
+ destroy_workqueue(pl022->workqueue);
+
+ return 0;
+}
+
+static int verify_controller_parameters(struct pl022 *pl022,
+ struct pl022_config_chip *chip_info)
+{
+ if ((chip_info->lbm != LOOPBACK_ENABLED)
+ && (chip_info->lbm != LOOPBACK_DISABLED)) {
+ dev_err(chip_info->dev,
+ "loopback Mode is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI)
+ || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) {
+ dev_err(chip_info->dev,
+ "interface is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) &&
+ (!pl022->vendor->unidir)) {
+ dev_err(chip_info->dev,
+ "unidirectional mode not supported in this "
+ "hardware version\n");
+ return -EINVAL;
+ }
+ if ((chip_info->hierarchy != SSP_MASTER)
+ && (chip_info->hierarchy != SSP_SLAVE)) {
+ dev_err(chip_info->dev,
+ "hierarchy is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if (((chip_info->clk_freq).cpsdvsr < CPSDVR_MIN)
+ || ((chip_info->clk_freq).cpsdvsr > CPSDVR_MAX)) {
+ dev_err(chip_info->dev,
+ "cpsdvsr is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->endian_rx != SSP_RX_MSB)
+ && (chip_info->endian_rx != SSP_RX_LSB)) {
+ dev_err(chip_info->dev,
+ "RX FIFO endianess is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->endian_tx != SSP_TX_MSB)
+ && (chip_info->endian_tx != SSP_TX_LSB)) {
+ dev_err(chip_info->dev,
+ "TX FIFO endianess is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->data_size < SSP_DATA_BITS_4)
+ || (chip_info->data_size > SSP_DATA_BITS_32)) {
+ dev_err(chip_info->dev,
+ "DATA Size is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->com_mode != INTERRUPT_TRANSFER)
+ && (chip_info->com_mode != DMA_TRANSFER)
+ && (chip_info->com_mode != POLLING_TRANSFER)) {
+ dev_err(chip_info->dev,
+ "Communication mode is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM)
+ || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) {
+ dev_err(chip_info->dev,
+ "RX FIFO Trigger Level is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC)
+ || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) {
+ dev_err(chip_info->dev,
+ "TX FIFO Trigger Level is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) {
+ if ((chip_info->clk_phase != SSP_CLK_RISING_EDGE)
+ && (chip_info->clk_phase != SSP_CLK_FALLING_EDGE)) {
+ dev_err(chip_info->dev,
+ "Clock Phase is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->clk_pol != SSP_CLK_POL_IDLE_LOW)
+ && (chip_info->clk_pol != SSP_CLK_POL_IDLE_HIGH)) {
+ dev_err(chip_info->dev,
+ "Clock Polarity is configured incorrectly\n");
+ return -EINVAL;
+ }
+ }
+ if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) {
+ if ((chip_info->ctrl_len < SSP_BITS_4)
+ || (chip_info->ctrl_len > SSP_BITS_32)) {
+ dev_err(chip_info->dev,
+ "CTRL LEN is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO)
+ && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) {
+ dev_err(chip_info->dev,
+ "Wait State is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX)
+ && (chip_info->duplex !=
+ SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) {
+ dev_err(chip_info->dev,
+ "DUPLEX is configured incorrectly\n");
+ return -EINVAL;
+ }
+ }
+ if (chip_info->cs_control == NULL) {
+ dev_warn(chip_info->dev,
+ "Chip Select Function is NULL for this chip\n");
+ chip_info->cs_control = null_cs_control;
+ }
+ return 0;
+}
+
+/**
+ * pl022_transfer - transfer function registered to SPI master framework
+ * @spi: spi device which is requesting transfer
+ * @msg: spi message which is to handled is queued to driver queue
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. It will queue the spi_message in the queue of driver if
+ * the queue is not stopped and return.
+ */
+static int pl022_transfer(struct spi_device *spi, struct spi_message *msg)
+{
+ struct pl022 *pl022 = spi_master_get_devdata(spi->master);
+ unsigned long flags;
+
+ spin_lock_irqsave(&pl022->queue_lock, flags);
+
+ if (pl022->run == QUEUE_STOPPED) {
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+ return -ESHUTDOWN;
+ }
+ msg->actual_length = 0;
+ msg->status = -EINPROGRESS;
+ msg->state = STATE_START;
+
+ list_add_tail(&msg->queue, &pl022->queue);
+ if (pl022->run == QUEUE_RUNNING && !pl022->busy)
+ queue_work(pl022->workqueue, &pl022->pump_messages);
+
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+ return 0;
+}
+
+static int calculate_effective_freq(struct pl022 *pl022,
+ int freq,
+ struct ssp_clock_params *clk_freq)
+{
+ /* Lets calculate the frequency parameters */
+ u16 cpsdvsr = 2;
+ u16 scr = 0;
+ bool freq_found = false;
+ u32 rate;
+ u32 max_tclk;
+ u32 min_tclk;
+
+ rate = clk_get_rate(pl022->clk);
+ /* cpsdvscr = 2 & scr 0 */
+ max_tclk = (rate / (CPSDVR_MIN * (1 + SCR_MIN)));
+ /* cpsdvsr = 254 & scr = 255 */
+ min_tclk = (rate / (CPSDVR_MAX * (1 + SCR_MAX)));
+
+ if ((freq <= max_tclk) && (freq >= min_tclk)) {
+ while (cpsdvsr <= CPSDVR_MAX && !freq_found) {
+ while (scr <= SCR_MAX && !freq_found) {
+ if ((rate /
+ (cpsdvsr * (1 + scr))) > freq)
+ scr += 1;
+ else {
+ /*
+ * This bool is made true when
+ * effective frequency >=
+ * target frequency is found
+ */
+ freq_found = true;
+ if ((rate /
+ (cpsdvsr * (1 + scr))) != freq) {
+ if (scr == SCR_MIN) {
+ cpsdvsr -= 2;
+ scr = SCR_MAX;
+ } else
+ scr -= 1;
+ }
+ }
+ }
+ if (!freq_found) {
+ cpsdvsr += 2;
+ scr = SCR_MIN;
+ }
+ }
+ if (cpsdvsr != 0) {
+ dev_dbg(&pl022->adev->dev,
+ "SSP Effective Frequency is %u\n",
+ (rate / (cpsdvsr * (1 + scr))));
+ clk_freq->cpsdvsr = (u8) (cpsdvsr & 0xFF);
+ clk_freq->scr = (u8) (scr & 0xFF);
+ dev_dbg(&pl022->adev->dev,
+ "SSP cpsdvsr = %d, scr = %d\n",
+ clk_freq->cpsdvsr, clk_freq->scr);
+ }
+ } else {
+ dev_err(&pl022->adev->dev,
+ "controller data is incorrect: out of range frequency");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/**
+ * NOT IMPLEMENTED
+ * process_dma_info - Processes the DMA info provided by client drivers
+ * @chip_info: chip info provided by client device
+ * @chip: Runtime state maintained by the SSP controller for each spi device
+ *
+ * This function processes and stores DMA config provided by client driver
+ * into the runtime state maintained by the SSP controller driver
+ */
+static int process_dma_info(struct pl022_config_chip *chip_info,
+ struct chip_data *chip)
+{
+ dev_err(chip_info->dev,
+ "cannot process DMA info, DMA not implemented!\n");
+ return -ENOTSUPP;
+}
+
+/**
+ * pl022_setup - setup function registered to SPI master framework
+ * @spi: spi device which is requesting setup
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. If it is the first time when setup is called by this device,
+ * this function will initialize the runtime state for this chip and save
+ * the same in the device structure. Else it will update the runtime info
+ * with the updated chip info. Nothing is really being written to the
+ * controller hardware here, that is not done until the actual transfer
+ * commence.
+ */
+
+/* FIXME: JUST GUESSING the spi->mode bits understood by this driver */
+#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
+ | SPI_LSB_FIRST | SPI_LOOP)
+
+static int pl022_setup(struct spi_device *spi)
+{
+ struct pl022_config_chip *chip_info;
+ struct chip_data *chip;
+ int status = 0;
+ struct pl022 *pl022 = spi_master_get_devdata(spi->master);
+
+ if (spi->mode & ~MODEBITS) {
+ dev_dbg(&spi->dev, "unsupported mode bits %x\n",
+ spi->mode & ~MODEBITS);
+ return -EINVAL;
+ }
+
+ if (!spi->max_speed_hz)
+ return -EINVAL;
+
+ /* Get controller_state if one is supplied */
+ chip = spi_get_ctldata(spi);
+
+ if (chip == NULL) {
+ chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
+ if (!chip) {
+ dev_err(&spi->dev,
+ "cannot allocate controller state\n");
+ return -ENOMEM;
+ }
+ dev_dbg(&spi->dev,
+ "allocated memory for controller's runtime state\n");
+ }
+
+ /* Get controller data if one is supplied */
+ chip_info = spi->controller_data;
+
+ if (chip_info == NULL) {
+ /* spi_board_info.controller_data not is supplied */
+ dev_dbg(&spi->dev,
+ "using default controller_data settings\n");
+
+ chip_info =
+ kzalloc(sizeof(struct pl022_config_chip), GFP_KERNEL);
+
+ if (!chip_info) {
+ dev_err(&spi->dev,
+ "cannot allocate controller data\n");
+ status = -ENOMEM;
+ goto err_first_setup;
+ }
+
+ dev_dbg(&spi->dev, "allocated memory for controller data\n");
+
+ /* Pointer back to the SPI device */
+ chip_info->dev = &spi->dev;
+ /*
+ * Set controller data default values:
+ * Polling is supported by default
+ */
+ chip_info->lbm = LOOPBACK_DISABLED;
+ chip_info->com_mode = POLLING_TRANSFER;
+ chip_info->iface = SSP_INTERFACE_MOTOROLA_SPI;
+ chip_info->hierarchy = SSP_SLAVE;
+ chip_info->slave_tx_disable = DO_NOT_DRIVE_TX;
+ chip_info->endian_tx = SSP_TX_LSB;
+ chip_info->endian_rx = SSP_RX_LSB;
+ chip_info->data_size = SSP_DATA_BITS_12;
+ chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM;
+ chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC;
+ chip_info->clk_phase = SSP_CLK_FALLING_EDGE;
+ chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW;
+ chip_info->ctrl_len = SSP_BITS_8;
+ chip_info->wait_state = SSP_MWIRE_WAIT_ZERO;
+ chip_info->duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX;
+ chip_info->cs_control = null_cs_control;
+ } else {
+ dev_dbg(&spi->dev,
+ "using user supplied controller_data settings\n");
+ }
+
+ /*
+ * We can override with custom divisors, else we use the board
+ * frequency setting
+ */
+ if ((0 == chip_info->clk_freq.cpsdvsr)
+ && (0 == chip_info->clk_freq.scr)) {
+ status = calculate_effective_freq(pl022,
+ spi->max_speed_hz,
+ &chip_info->clk_freq);
+ if (status < 0)
+ goto err_config_params;
+ } else {
+ if ((chip_info->clk_freq.cpsdvsr % 2) != 0)
+ chip_info->clk_freq.cpsdvsr =
+ chip_info->clk_freq.cpsdvsr - 1;
+ }
+ status = verify_controller_parameters(pl022, chip_info);
+ if (status) {
+ dev_err(&spi->dev, "controller data is incorrect");
+ goto err_config_params;
+ }
+ /* Now set controller state based on controller data */
+ chip->xfer_type = chip_info->com_mode;
+ chip->cs_control = chip_info->cs_control;
+
+ if (chip_info->data_size <= 8) {
+ dev_dbg(&spi->dev, "1 <= n <=8 bits per word\n");
+ chip->n_bytes = 1;
+ chip->read = READING_U8;
+ chip->write = WRITING_U8;
+ } else if (chip_info->data_size <= 16) {
+ dev_dbg(&spi->dev, "9 <= n <= 16 bits per word\n");
+ chip->n_bytes = 2;
+ chip->read = READING_U16;
+ chip->write = WRITING_U16;
+ } else {
+ if (pl022->vendor->max_bpw >= 32) {
+ dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n");
+ chip->n_bytes = 4;
+ chip->read = READING_U32;
+ chip->write = WRITING_U32;
+ } else {
+ dev_err(&spi->dev,
+ "illegal data size for this controller!\n");
+ dev_err(&spi->dev,
+ "a standard pl022 can only handle "
+ "1 <= n <= 16 bit words\n");
+ goto err_config_params;
+ }
+ }
+
+ /* Now Initialize all register settings required for this chip */
+ chip->cr0 = 0;
+ chip->cr1 = 0;
+ chip->dmacr = 0;
+ chip->cpsr = 0;
+ if ((chip_info->com_mode == DMA_TRANSFER)
+ && ((pl022->master_info)->enable_dma)) {
+ chip->enable_dma = 1;
+ dev_dbg(&spi->dev, "DMA mode set in controller state\n");
+ status = process_dma_info(chip_info, chip);
+ if (status < 0)
+ goto err_config_params;
+ SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED,
+ SSP_DMACR_MASK_RXDMAE, 0);
+ SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED,
+ SSP_DMACR_MASK_TXDMAE, 1);
+ } else {
+ chip->enable_dma = 0;
+ dev_dbg(&spi->dev, "DMA mode NOT set in controller state\n");
+ SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED,
+ SSP_DMACR_MASK_RXDMAE, 0);
+ SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED,
+ SSP_DMACR_MASK_TXDMAE, 1);
+ }
+
+ chip->cpsr = chip_info->clk_freq.cpsdvsr;
+
+ SSP_WRITE_BITS(chip->cr0, chip_info->data_size, SSP_CR0_MASK_DSS, 0);
+ SSP_WRITE_BITS(chip->cr0, chip_info->duplex, SSP_CR0_MASK_HALFDUP, 5);
+ SSP_WRITE_BITS(chip->cr0, chip_info->clk_pol, SSP_CR0_MASK_SPO, 6);
+ SSP_WRITE_BITS(chip->cr0, chip_info->clk_phase, SSP_CR0_MASK_SPH, 7);
+ SSP_WRITE_BITS(chip->cr0, chip_info->clk_freq.scr, SSP_CR0_MASK_SCR, 8);
+ SSP_WRITE_BITS(chip->cr0, chip_info->ctrl_len, SSP_CR0_MASK_CSS, 16);
+ SSP_WRITE_BITS(chip->cr0, chip_info->iface, SSP_CR0_MASK_FRF, 21);
+ SSP_WRITE_BITS(chip->cr1, chip_info->lbm, SSP_CR1_MASK_LBM, 0);
+ SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1);
+ SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2);
+ SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3);
+ SSP_WRITE_BITS(chip->cr1, chip_info->endian_rx, SSP_CR1_MASK_RENDN, 4);
+ SSP_WRITE_BITS(chip->cr1, chip_info->endian_tx, SSP_CR1_MASK_TENDN, 5);
+ SSP_WRITE_BITS(chip->cr1, chip_info->wait_state, SSP_CR1_MASK_MWAIT, 6);
+ SSP_WRITE_BITS(chip->cr1, chip_info->rx_lev_trig, SSP_CR1_MASK_RXIFLSEL, 7);
+ SSP_WRITE_BITS(chip->cr1, chip_info->tx_lev_trig, SSP_CR1_MASK_TXIFLSEL, 10);
+
+ /* Save controller_state */
+ spi_set_ctldata(spi, chip);
+ return status;
+ err_config_params:
+ err_first_setup:
+ kfree(chip);
+ return status;
+}
+
+/**
+ * pl022_cleanup - cleanup function registered to SPI master framework
+ * @spi: spi device which is requesting cleanup
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. It will free the runtime state of chip.
+ */
+static void pl022_cleanup(struct spi_device *spi)
+{
+ struct chip_data *chip = spi_get_ctldata(spi);
+
+ spi_set_ctldata(spi, NULL);
+ kfree(chip);
+}
+
+
+static int __init
+pl022_probe(struct amba_device *adev, struct amba_id *id)
+{
+ struct device *dev = &adev->dev;
+ struct pl022_ssp_controller *platform_info = adev->dev.platform_data;
+ struct spi_master *master;
+ struct pl022 *pl022 = NULL; /*Data for this driver */
+ int status = 0;
+
+ dev_info(&adev->dev,
+ "ARM PL022 driver, device ID: 0x%08x\n", adev->periphid);
+ if (platform_info == NULL) {
+ dev_err(&adev->dev, "probe - no platform data supplied\n");
+ status = -ENODEV;
+ goto err_no_pdata;
+ }
+
+ /* Allocate master with space for data */
+ master = spi_alloc_master(dev, sizeof(struct pl022));
+ if (master == NULL) {
+ dev_err(&adev->dev, "probe - cannot alloc SPI master\n");
+ status = -ENOMEM;
+ goto err_no_master;
+ }
+
+ pl022 = spi_master_get_devdata(master);
+ pl022->master = master;
+ pl022->master_info = platform_info;
+ pl022->adev = adev;
+ pl022->vendor = id->data;
+
+ /*
+ * Bus Number Which has been Assigned to this SSP controller
+ * on this board
+ */
+ master->bus_num = platform_info->bus_id;
+ master->num_chipselect = platform_info->num_chipselect;
+ master->cleanup = pl022_cleanup;
+ master->setup = pl022_setup;
+ master->transfer = pl022_transfer;
+
+ dev_dbg(&adev->dev, "BUSNO: %d\n", master->bus_num);
+
+ status = amba_request_regions(adev, NULL);
+ if (status)
+ goto err_no_ioregion;
+
+ pl022->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
+ if (pl022->virtbase == NULL) {
+ status = -ENOMEM;
+ goto err_no_ioremap;
+ }
+ printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n",
+ adev->res.start, pl022->virtbase);
+
+ pl022->clk = clk_get(&adev->dev, NULL);
+ if (IS_ERR(pl022->clk)) {
+ status = PTR_ERR(pl022->clk);
+ dev_err(&adev->dev, "could not retrieve SSP/SPI bus clock\n");
+ goto err_no_clk;
+ }
+
+ /* Disable SSP */
+ clk_enable(pl022->clk);
+ writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
+ SSP_CR1(pl022->virtbase));
+ load_ssp_default_config(pl022);
+ clk_disable(pl022->clk);
+
+ status = request_irq(adev->irq[0], pl022_interrupt_handler, 0, "pl022",
+ pl022);
+ if (status < 0) {
+ dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status);
+ goto err_no_irq;
+ }
+ /* Initialize and start queue */
+ status = init_queue(pl022);
+ if (status != 0) {
+ dev_err(&adev->dev, "probe - problem initializing queue\n");
+ goto err_init_queue;
+ }
+ status = start_queue(pl022);
+ if (status != 0) {
+ dev_err(&adev->dev, "probe - problem starting queue\n");
+ goto err_start_queue;
+ }
+ /* Register with the SPI framework */
+ amba_set_drvdata(adev, pl022);
+ status = spi_register_master(master);
+ if (status != 0) {
+ dev_err(&adev->dev,
+ "probe - problem registering spi master\n");
+ goto err_spi_register;
+ }
+ dev_dbg(dev, "probe succeded\n");
+ return 0;
+
+ err_spi_register:
+ err_start_queue:
+ err_init_queue:
+ destroy_queue(pl022);
+ free_irq(adev->irq[0], pl022);
+ err_no_irq:
+ clk_put(pl022->clk);
+ err_no_clk:
+ iounmap(pl022->virtbase);
+ err_no_ioremap:
+ amba_release_regions(adev);
+ err_no_ioregion:
+ spi_master_put(master);
+ err_no_master:
+ err_no_pdata:
+ return status;
+}
+
+static int __exit
+pl022_remove(struct amba_device *adev)
+{
+ struct pl022 *pl022 = amba_get_drvdata(adev);
+ int status = 0;
+ if (!pl022)
+ return 0;
+
+ /* Remove the queue */
+ status = destroy_queue(pl022);
+ if (status != 0) {
+ dev_err(&adev->dev,
+ "queue remove failed (%d)\n", status);
+ return status;
+ }
+ load_ssp_default_config(pl022);
+ free_irq(adev->irq[0], pl022);
+ clk_disable(pl022->clk);
+ clk_put(pl022->clk);
+ iounmap(pl022->virtbase);
+ amba_release_regions(adev);
+ tasklet_disable(&pl022->pump_transfers);
+ spi_unregister_master(pl022->master);
+ spi_master_put(pl022->master);
+ amba_set_drvdata(adev, NULL);
+ dev_dbg(&adev->dev, "remove succeded\n");
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int pl022_suspend(struct amba_device *adev, pm_message_t state)
+{
+ struct pl022 *pl022 = amba_get_drvdata(adev);
+ int status = 0;
+
+ status = stop_queue(pl022);
+ if (status) {
+ dev_warn(&adev->dev, "suspend cannot stop queue\n");
+ return status;
+ }
+
+ clk_enable(pl022->clk);
+ load_ssp_default_config(pl022);
+ clk_disable(pl022->clk);
+ dev_dbg(&adev->dev, "suspended\n");
+ return 0;
+}
+
+static int pl022_resume(struct amba_device *adev)
+{
+ struct pl022 *pl022 = amba_get_drvdata(adev);
+ int status = 0;
+
+ /* Start the queue running */
+ status = start_queue(pl022);
+ if (status)
+ dev_err(&adev->dev, "problem starting queue (%d)\n", status);
+ else
+ dev_dbg(&adev->dev, "resumed\n");
+
+ return status;
+}
+#else
+#define pl022_suspend NULL
+#define pl022_resume NULL
+#endif /* CONFIG_PM */
+
+static struct vendor_data vendor_arm = {
+ .fifodepth = 8,
+ .max_bpw = 16,
+ .unidir = false,
+};
+
+
+static struct vendor_data vendor_st = {
+ .fifodepth = 32,
+ .max_bpw = 32,
+ .unidir = false,
+};
+
+static struct amba_id pl022_ids[] = {
+ {
+ /*
+ * ARM PL022 variant, this has a 16bit wide
+ * and 8 locations deep TX/RX FIFO
+ */
+ .id = 0x00041022,
+ .mask = 0x000fffff,
+ .data = &vendor_arm,
+ },
+ {
+ /*
+ * ST Micro derivative, this has 32bit wide
+ * and 32 locations deep TX/RX FIFO
+ */
+ .id = 0x00108022,
+ .mask = 0xffffffff,
+ .data = &vendor_st,
+ },
+ { 0, 0 },
+};
+
+static struct amba_driver pl022_driver = {
+ .drv = {
+ .name = "ssp-pl022",
+ },
+ .id_table = pl022_ids,
+ .probe = pl022_probe,
+ .remove = __exit_p(pl022_remove),
+ .suspend = pl022_suspend,
+ .resume = pl022_resume,
+};
+
+
+static int __init pl022_init(void)
+{
+ return amba_driver_register(&pl022_driver);
+}
+
+module_init(pl022_init);
+
+static void __exit pl022_exit(void)
+{
+ amba_driver_unregister(&pl022_driver);
+}
+
+module_exit(pl022_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("PL022 SSP Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
index f2447a5..bbf9371 100644
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -17,6 +17,7 @@
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 7cf74f8..b0dbf41 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -47,7 +47,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
struct usb_hcd *hcd;
if (pdev->resource[1].flags != IORESOURCE_IRQ) {
- pr_debug("resource[1] is not IORESOURCE_IRQ");
+ dbg("resource[1] is not IORESOURCE_IRQ");
return -ENOMEM;
}
@@ -65,12 +65,18 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (hcd->regs == NULL) {
- pr_debug("ioremap failed");
+ dbg("ioremap failed");
retval = -ENOMEM;
goto err2;
}
- usb_host_clock = clk_get(&pdev->dev, "usb_host");
+ usb_host_clock = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(usb_host_clock)) {
+ dbg("clk_get failed");
+ retval = PTR_ERR(usb_host_clock);
+ goto err3;
+ }
+
ep93xx_start_hc(&pdev->dev);
ohci_hcd_init(hcd_to_ohci(hcd));
@@ -80,6 +86,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
return retval;
ep93xx_stop_hc(&pdev->dev);
+err3:
iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 74712cb..2b5a691 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -397,7 +397,7 @@ config FB_SA1100
config FB_IMX
tristate "Motorola i.MX LCD support"
- depends on FB && (ARCH_IMX || ARCH_MX2)
+ depends on FB && (ARCH_MX1 || ARCH_MX2)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1759,6 +1759,16 @@ config FB_68328
Say Y here if you want to support the built-in frame buffer of
the Motorola 68328 CPU family.
+config FB_PXA168
+ tristate "PXA168/910 LCD framebuffer support"
+ depends on FB && (CPU_PXA168 || CPU_PXA910)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the built-in LCD controller in the Marvell
+ MMP processor.
+
config FB_PXA
tristate "PXA LCD framebuffer support"
depends on FB && ARCH_PXA
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index d8d0be5..01a819f 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -97,6 +97,7 @@ obj-$(CONFIG_FB_GBE) += gbefb.o
obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o
obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o
obj-$(CONFIG_FB_PXA) += pxafb.o
+obj-$(CONFIG_FB_PXA168) += pxa168fb.o
obj-$(CONFIG_FB_W100) += w100fb.o
obj-$(CONFIG_FB_TMIO) += tmiofb.o
obj-$(CONFIG_FB_AU1100) += au1100fb.o
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index d1f80ba..fb8163d 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -351,7 +351,7 @@ static int clcdfb_register(struct clcd_fb *fb)
}
fb->fb.fix.mmio_start = fb->dev->res.start;
- fb->fb.fix.mmio_len = 4096;
+ fb->fb.fix.mmio_len = resource_size(&fb->dev->res);
fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
if (!fb->regs) {
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 9894de1..b7af525 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -706,7 +706,7 @@ static void mx3fb_dma_done(void *arg)
dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
/* We only need one interrupt, it will be re-enabled as needed */
- disable_irq(ichannel->eof_irq);
+ disable_irq_nosync(ichannel->eof_irq);
complete(&mx3_fbi->flip_cmpl);
}
@@ -1366,7 +1366,7 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
mx3fb_blank(FB_BLANK_UNBLANK, fbi);
- dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+ dev_info(dev, "registered, using mode %s\n", fb_mode);
ret = register_framebuffer(fbi);
if (ret < 0)
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index 8aa6e47..5d4f348 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -133,8 +133,7 @@ struct {
struct lcd_ctrl_extif *extif;
struct lcd_ctrl *int_ctrl;
- void (*power_up)(struct device *dev);
- void (*power_down)(struct device *dev);
+ struct clk *sys_ck;
} hwa742;
struct lcd_ctrl hwa742_ctrl;
@@ -915,14 +914,13 @@ static void hwa742_suspend(void)
hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
/* Enable sleep mode */
hwa742_write_reg(HWA742_POWER_SAVE, 1 << 1);
- if (hwa742.power_down != NULL)
- hwa742.power_down(hwa742.fbdev->dev);
+ clk_disable(hwa742.sys_ck);
}
static void hwa742_resume(void)
{
- if (hwa742.power_up != NULL)
- hwa742.power_up(hwa742.fbdev->dev);
+ clk_enable(hwa742.sys_ck);
+
/* Disable sleep mode */
hwa742_write_reg(HWA742_POWER_SAVE, 0);
while (1) {
@@ -955,14 +953,13 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
omapfb_conf = fbdev->dev->platform_data;
ctrl_conf = omapfb_conf->ctrl_platform_data;
- if (ctrl_conf == NULL || ctrl_conf->get_clock_rate == NULL) {
+ if (ctrl_conf == NULL) {
dev_err(fbdev->dev, "HWA742: missing platform data\n");
r = -ENOENT;
goto err1;
}
- hwa742.power_down = ctrl_conf->power_down;
- hwa742.power_up = ctrl_conf->power_up;
+ hwa742.sys_ck = clk_get(NULL, "hwa_sys_ck");
spin_lock_init(&hwa742.req_lock);
@@ -972,12 +969,11 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
if ((r = hwa742.extif->init(fbdev)) < 0)
goto err2;
- ext_clk = ctrl_conf->get_clock_rate(fbdev->dev);
+ ext_clk = clk_get_rate(hwa742.sys_ck);
if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0)
goto err3;
hwa742.extif->set_timings(&hwa742.reg_timings);
- if (hwa742.power_up != NULL)
- hwa742.power_up(fbdev->dev);
+ clk_enable(hwa742.sys_ck);
calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk);
if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0)
@@ -1040,8 +1036,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
return 0;
err4:
- if (hwa742.power_down != NULL)
- hwa742.power_down(fbdev->dev);
+ clk_disable(hwa742.sys_ck);
err3:
hwa742.extif->cleanup();
err2:
@@ -1055,8 +1050,7 @@ static void hwa742_cleanup(void)
hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
hwa742.extif->cleanup();
hwa742.int_ctrl->cleanup();
- if (hwa742.power_down != NULL)
- hwa742.power_down(hwa742.fbdev->dev);
+ clk_disable(hwa742.sys_ck);
}
struct lcd_ctrl hwa742_ctrl = {
diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
new file mode 100644
index 0000000..84d8327
--- /dev/null
+++ b/drivers/video/pxa168fb.c
@@ -0,0 +1,803 @@
+/*
+ * linux/drivers/video/pxa168fb.c -- Marvell PXA168 LCD Controller
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ * All rights reserved.
+ *
+ * 2009-02-16 adapted from original version for PXA168/910
+ * Jun Nie <njun@marvell.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/uaccess.h>
+#include <video/pxa168fb.h>
+
+#include "pxa168fb.h"
+
+#define DEFAULT_REFRESH 60 /* Hz */
+
+static int determine_best_pix_fmt(struct fb_var_screeninfo *var)
+{
+ /*
+ * Pseudocolor mode?
+ */
+ if (var->bits_per_pixel == 8)
+ return PIX_FMT_PSEUDOCOLOR;
+
+ /*
+ * Check for 565/1555.
+ */
+ if (var->bits_per_pixel == 16 && var->red.length <= 5 &&
+ var->green.length <= 6 && var->blue.length <= 5) {
+ if (var->transp.length == 0) {
+ if (var->red.offset >= var->blue.offset)
+ return PIX_FMT_RGB565;
+ else
+ return PIX_FMT_BGR565;
+ }
+
+ if (var->transp.length == 1 && var->green.length <= 5) {
+ if (var->red.offset >= var->blue.offset)
+ return PIX_FMT_RGB1555;
+ else
+ return PIX_FMT_BGR1555;
+ }
+
+ /* fall through */
+ }
+
+ /*
+ * Check for 888/A888.
+ */
+ if (var->bits_per_pixel <= 32 && var->red.length <= 8 &&
+ var->green.length <= 8 && var->blue.length <= 8) {
+ if (var->bits_per_pixel == 24 && var->transp.length == 0) {
+ if (var->red.offset >= var->blue.offset)
+ return PIX_FMT_RGB888PACK;
+ else
+ return PIX_FMT_BGR888PACK;
+ }
+
+ if (var->bits_per_pixel == 32 && var->transp.length == 8) {
+ if (var->red.offset >= var->blue.offset)
+ return PIX_FMT_RGBA888;
+ else
+ return PIX_FMT_BGRA888;
+ } else {
+ if (var->red.offset >= var->blue.offset)
+ return PIX_FMT_RGB888UNPACK;
+ else
+ return PIX_FMT_BGR888UNPACK;
+ }
+
+ /* fall through */
+ }
+
+ return -EINVAL;
+}
+
+static void set_pix_fmt(struct fb_var_screeninfo *var, int pix_fmt)
+{
+ switch (pix_fmt) {
+ case PIX_FMT_RGB565:
+ var->bits_per_pixel = 16;
+ var->red.offset = 11; var->red.length = 5;
+ var->green.offset = 5; var->green.length = 6;
+ var->blue.offset = 0; var->blue.length = 5;
+ var->transp.offset = 0; var->transp.length = 0;
+ break;
+ case PIX_FMT_BGR565:
+ var->bits_per_pixel = 16;
+ var->red.offset = 0; var->red.length = 5;
+ var->green.offset = 5; var->green.length = 6;
+ var->blue.offset = 11; var->blue.length = 5;
+ var->transp.offset = 0; var->transp.length = 0;
+ break;
+ case PIX_FMT_RGB1555:
+ var->bits_per_pixel = 16;
+ var->red.offset = 10; var->red.length = 5;
+ var->green.offset = 5; var->green.length = 5;
+ var->blue.offset = 0; var->blue.length = 5;
+ var->transp.offset = 15; var->transp.length = 1;
+ break;
+ case PIX_FMT_BGR1555:
+ var->bits_per_pixel = 16;
+ var->red.offset = 0; var->red.length = 5;
+ var->green.offset = 5; var->green.length = 5;
+ var->blue.offset = 10; var->blue.length = 5;
+ var->transp.offset = 15; var->transp.length = 1;
+ break;
+ case PIX_FMT_RGB888PACK:
+ var->bits_per_pixel = 24;
+ var->red.offset = 16; var->red.length = 8;
+ var->green.offset = 8; var->green.length = 8;
+ var->blue.offset = 0; var->blue.length = 8;
+ var->transp.offset = 0; var->transp.length = 0;
+ break;
+ case PIX_FMT_BGR888PACK:
+ var->bits_per_pixel = 24;
+ var->red.offset = 0; var->red.length = 8;
+ var->green.offset = 8; var->green.length = 8;
+ var->blue.offset = 16; var->blue.length = 8;
+ var->transp.offset = 0; var->transp.length = 0;
+ break;
+ case PIX_FMT_RGBA888:
+ var->bits_per_pixel = 32;
+ var->red.offset = 16; var->red.length = 8;
+ var->green.offset = 8; var->green.length = 8;
+ var->blue.offset = 0; var->blue.length = 8;
+ var->transp.offset = 24; var->transp.length = 8;
+ break;
+ case PIX_FMT_BGRA888:
+ var->bits_per_pixel = 32;
+ var->red.offset = 0; var->red.length = 8;
+ var->green.offset = 8; var->green.length = 8;
+ var->blue.offset = 16; var->blue.length = 8;
+ var->transp.offset = 24; var->transp.length = 8;
+ break;
+ case PIX_FMT_PSEUDOCOLOR:
+ var->bits_per_pixel = 8;
+ var->red.offset = 0; var->red.length = 8;
+ var->green.offset = 0; var->green.length = 8;
+ var->blue.offset = 0; var->blue.length = 8;
+ var->transp.offset = 0; var->transp.length = 0;
+ break;
+ }
+}
+
+static void set_mode(struct pxa168fb_info *fbi, struct fb_var_screeninfo *var,
+ struct fb_videomode *mode, int pix_fmt, int ystretch)
+{
+ struct fb_info *info = fbi->info;
+
+ set_pix_fmt(var, pix_fmt);
+
+ var->xres = mode->xres;
+ var->yres = mode->yres;
+ var->xres_virtual = max(var->xres, var->xres_virtual);
+ if (ystretch)
+ var->yres_virtual = info->fix.smem_len /
+ (var->xres_virtual * (var->bits_per_pixel >> 3));
+ else
+ var->yres_virtual = max(var->yres, var->yres_virtual);
+ var->grayscale = 0;
+ var->accel_flags = FB_ACCEL_NONE;
+ var->pixclock = mode->pixclock;
+ var->left_margin = mode->left_margin;
+ var->right_margin = mode->right_margin;
+ var->upper_margin = mode->upper_margin;
+ var->lower_margin = mode->lower_margin;
+ var->hsync_len = mode->hsync_len;
+ var->vsync_len = mode->vsync_len;
+ var->sync = mode->sync;
+ var->vmode = FB_VMODE_NONINTERLACED;
+ var->rotate = FB_ROTATE_UR;
+}
+
+static int pxa168fb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct pxa168fb_info *fbi = info->par;
+ int pix_fmt;
+
+ /*
+ * Determine which pixel format we're going to use.
+ */
+ pix_fmt = determine_best_pix_fmt(var);
+ if (pix_fmt < 0)
+ return pix_fmt;
+ set_pix_fmt(var, pix_fmt);
+ fbi->pix_fmt = pix_fmt;
+
+ /*
+ * Basic geometry sanity checks.
+ */
+ if (var->xoffset + var->xres > var->xres_virtual)
+ return -EINVAL;
+ if (var->yoffset + var->yres > var->yres_virtual)
+ return -EINVAL;
+ if (var->xres + var->right_margin +
+ var->hsync_len + var->left_margin > 2048)
+ return -EINVAL;
+ if (var->yres + var->lower_margin +
+ var->vsync_len + var->upper_margin > 2048)
+ return -EINVAL;
+
+ /*
+ * Check size of framebuffer.
+ */
+ if (var->xres_virtual * var->yres_virtual *
+ (var->bits_per_pixel >> 3) > info->fix.smem_len)
+ return -EINVAL;
+
+ return 0;
+}
+
+/*
+ * The hardware clock divider has an integer and a fractional
+ * stage:
+ *
+ * clk2 = clk_in / integer_divider
+ * clk_out = clk2 * (1 - (fractional_divider >> 12))
+ *
+ * Calculate integer and fractional divider for given clk_in
+ * and clk_out.
+ */
+static void set_clock_divider(struct pxa168fb_info *fbi,
+ const struct fb_videomode *m)
+{
+ int divider_int;
+ int needed_pixclk;
+ u64 div_result;
+ u32 x = 0;
+
+ /*
+ * Notice: The field pixclock is used by linux fb
+ * is in pixel second. E.g. struct fb_videomode &
+ * struct fb_var_screeninfo
+ */
+
+ /*
+ * Check input values.
+ */
+ if (!m || !m->pixclock || !m->refresh) {
+ dev_err(fbi->dev, "Input refresh or pixclock is wrong.\n");
+ return;
+ }
+
+ /*
+ * Using PLL/AXI clock.
+ */
+ x = 0x80000000;
+
+ /*
+ * Calc divider according to refresh rate.
+ */
+ div_result = 1000000000000ll;
+ do_div(div_result, m->pixclock);
+ needed_pixclk = (u32)div_result;
+
+ divider_int = clk_get_rate(fbi->clk) / needed_pixclk;
+
+ /* check whether divisor is too small. */
+ if (divider_int < 2) {
+ dev_warn(fbi->dev, "Warning: clock source is too slow."
+ "Try smaller resolution\n");
+ divider_int = 2;
+ }
+
+ /*
+ * Set setting to reg.
+ */
+ x |= divider_int;
+ writel(x, fbi->reg_base + LCD_CFG_SCLK_DIV);
+}
+
+static void set_dma_control0(struct pxa168fb_info *fbi)
+{
+ u32 x;
+
+ /*
+ * Set bit to enable graphics DMA.
+ */
+ x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
+ x |= fbi->active ? 0x00000100 : 0;
+ fbi->active = 0;
+
+ /*
+ * If we are in a pseudo-color mode, we need to enable
+ * palette lookup.
+ */
+ if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
+ x |= 0x10000000;
+
+ /*
+ * Configure hardware pixel format.
+ */
+ x &= ~(0xF << 16);
+ x |= (fbi->pix_fmt >> 1) << 16;
+
+ /*
+ * Check red and blue pixel swap.
+ * 1. source data swap
+ * 2. panel output data swap
+ */
+ x &= ~(1 << 12);
+ x |= ((fbi->pix_fmt & 1) ^ (fbi->panel_rbswap)) << 12;
+
+ writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL0);
+}
+
+static void set_dma_control1(struct pxa168fb_info *fbi, int sync)
+{
+ u32 x;
+
+ /*
+ * Configure default bits: vsync triggers DMA, gated clock
+ * enable, power save enable, configure alpha registers to
+ * display 100% graphics, and set pixel command.
+ */
+ x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL1);
+ x |= 0x2032ff81;
+
+ /*
+ * We trigger DMA on the falling edge of vsync if vsync is
+ * active low, or on the rising edge if vsync is active high.
+ */
+ if (!(sync & FB_SYNC_VERT_HIGH_ACT))
+ x |= 0x08000000;
+
+ writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL1);
+}
+
+static void set_graphics_start(struct fb_info *info, int xoffset, int yoffset)
+{
+ struct pxa168fb_info *fbi = info->par;
+ struct fb_var_screeninfo *var = &info->var;
+ int pixel_offset;
+ unsigned long addr;
+
+ pixel_offset = (yoffset * var->xres_virtual) + xoffset;
+
+ addr = fbi->fb_start_dma + (pixel_offset * (var->bits_per_pixel >> 3));
+ writel(addr, fbi->reg_base + LCD_CFG_GRA_START_ADDR0);
+}
+
+static void set_dumb_panel_control(struct fb_info *info)
+{
+ struct pxa168fb_info *fbi = info->par;
+ struct pxa168fb_mach_info *mi = fbi->dev->platform_data;
+ u32 x;
+
+ /*
+ * Preserve enable flag.
+ */
+ x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL) & 0x00000001;
+
+ x |= (fbi->is_blanked ? 0x7 : mi->dumb_mode) << 28;
+ x |= mi->gpio_output_data << 20;
+ x |= mi->gpio_output_mask << 12;
+ x |= mi->panel_rgb_reverse_lanes ? 0x00000080 : 0;
+ x |= mi->invert_composite_blank ? 0x00000040 : 0;
+ x |= (info->var.sync & FB_SYNC_COMP_HIGH_ACT) ? 0x00000020 : 0;
+ x |= mi->invert_pix_val_ena ? 0x00000010 : 0;
+ x |= (info->var.sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 0x00000008;
+ x |= (info->var.sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 0x00000004;
+ x |= mi->invert_pixclock ? 0x00000002 : 0;
+
+ writel(x, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+}
+
+static void set_dumb_screen_dimensions(struct fb_info *info)
+{
+ struct pxa168fb_info *fbi = info->par;
+ struct fb_var_screeninfo *v = &info->var;
+ int x;
+ int y;
+
+ x = v->xres + v->right_margin + v->hsync_len + v->left_margin;
+ y = v->yres + v->lower_margin + v->vsync_len + v->upper_margin;
+
+ writel((y << 16) | x, fbi->reg_base + LCD_SPUT_V_H_TOTAL);
+}
+
+static int pxa168fb_set_par(struct fb_info *info)
+{
+ struct pxa168fb_info *fbi = info->par;
+ struct fb_var_screeninfo *var = &info->var;
+ struct fb_videomode mode;
+ u32 x;
+ struct pxa168fb_mach_info *mi;
+
+ mi = fbi->dev->platform_data;
+
+ /*
+ * Set additional mode info.
+ */
+ if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR)
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ else
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
+ info->fix.ypanstep = var->yres;
+
+ /*
+ * Disable panel output while we setup the display.
+ */
+ x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
+ writel(x & ~1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+
+ /*
+ * Configure global panel parameters.
+ */
+ writel((var->yres << 16) | var->xres,
+ fbi->reg_base + LCD_SPU_V_H_ACTIVE);
+
+ /*
+ * convet var to video mode
+ */
+ fb_var_to_videomode(&mode, &info->var);
+
+ /* Calculate clock divisor. */
+ set_clock_divider(fbi, &mode);
+
+ /* Configure dma ctrl regs. */
+ set_dma_control0(fbi);
+ set_dma_control1(fbi, info->var.sync);
+
+ /*
+ * Configure graphics DMA parameters.
+ */
+ x = readl(fbi->reg_base + LCD_CFG_GRA_PITCH);
+ x = (x & ~0xFFFF) | ((var->xres_virtual * var->bits_per_pixel) >> 3);
+ writel(x, fbi->reg_base + LCD_CFG_GRA_PITCH);
+ writel((var->yres << 16) | var->xres,
+ fbi->reg_base + LCD_SPU_GRA_HPXL_VLN);
+ writel((var->yres << 16) | var->xres,
+ fbi->reg_base + LCD_SPU_GZM_HPXL_VLN);
+
+ /*
+ * Configure dumb panel ctrl regs & timings.
+ */
+ set_dumb_panel_control(info);
+ set_dumb_screen_dimensions(info);
+
+ writel((var->left_margin << 16) | var->right_margin,
+ fbi->reg_base + LCD_SPU_H_PORCH);
+ writel((var->upper_margin << 16) | var->lower_margin,
+ fbi->reg_base + LCD_SPU_V_PORCH);
+
+ /*
+ * Re-enable panel output.
+ */
+ x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL);
+ writel(x | 1, fbi->reg_base + LCD_SPU_DUMB_CTRL);
+
+ return 0;
+}
+
+static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf)
+{
+ return ((chan & 0xffff) >> (16 - bf->length)) << bf->offset;
+}
+
+static u32 to_rgb(u16 red, u16 green, u16 blue)
+{
+ red >>= 8;
+ green >>= 8;
+ blue >>= 8;
+
+ return (red << 16) | (green << 8) | blue;
+}
+
+static int
+pxa168fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
+ unsigned int blue, unsigned int trans, struct fb_info *info)
+{
+ struct pxa168fb_info *fbi = info->par;
+ u32 val;
+
+ if (info->var.grayscale)
+ red = green = blue = (19595 * red + 38470 * green +
+ 7471 * blue) >> 16;
+
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 16) {
+ val = chan_to_field(red, &info->var.red);
+ val |= chan_to_field(green, &info->var.green);
+ val |= chan_to_field(blue , &info->var.blue);
+ fbi->pseudo_palette[regno] = val;
+ }
+
+ if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
+ val = to_rgb(red, green, blue);
+ writel(val, fbi->reg_base + LCD_SPU_SRAM_WRDAT);
+ writel(0x8300 | regno, fbi->reg_base + LCD_SPU_SRAM_CTRL);
+ }
+
+ return 0;
+}
+
+static int pxa168fb_blank(int blank, struct fb_info *info)
+{
+ struct pxa168fb_info *fbi = info->par;
+
+ fbi->is_blanked = (blank == FB_BLANK_UNBLANK) ? 0 : 1;
+ set_dumb_panel_control(info);
+
+ return 0;
+}
+
+static int pxa168fb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ set_graphics_start(info, var->xoffset, var->yoffset);
+
+ return 0;
+}
+
+static irqreturn_t pxa168fb_handle_irq(int irq, void *dev_id)
+{
+ struct pxa168fb_info *fbi = dev_id;
+ u32 isr = readl(fbi->reg_base + SPU_IRQ_ISR);
+
+ if ((isr & GRA_FRAME_IRQ0_ENA_MASK)) {
+
+ writel(isr & (~GRA_FRAME_IRQ0_ENA_MASK),
+ fbi->reg_base + SPU_IRQ_ISR);
+
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+static struct fb_ops pxa168fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = pxa168fb_check_var,
+ .fb_set_par = pxa168fb_set_par,
+ .fb_setcolreg = pxa168fb_setcolreg,
+ .fb_blank = pxa168fb_blank,
+ .fb_pan_display = pxa168fb_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
+static int __init pxa168fb_init_mode(struct fb_info *info,
+ struct pxa168fb_mach_info *mi)
+{
+ struct pxa168fb_info *fbi = info->par;
+ struct fb_var_screeninfo *var = &info->var;
+ int ret = 0;
+ u32 total_w, total_h, refresh;
+ u64 div_result;
+ const struct fb_videomode *m;
+
+ /*
+ * Set default value
+ */
+ refresh = DEFAULT_REFRESH;
+
+ /* try to find best video mode. */
+ m = fb_find_best_mode(&info->var, &info->modelist);
+ if (m)
+ fb_videomode_to_var(&info->var, m);
+
+ /* Init settings. */
+ var->xres_virtual = var->xres;
+ var->yres_virtual = info->fix.smem_len /
+ (var->xres_virtual * (var->bits_per_pixel >> 3));
+ dev_dbg(fbi->dev, "pxa168fb: find best mode: res = %dx%d\n",
+ var->xres, var->yres);
+
+ /* correct pixclock. */
+ total_w = var->xres + var->left_margin + var->right_margin +
+ var->hsync_len;
+ total_h = var->yres + var->upper_margin + var->lower_margin +
+ var->vsync_len;
+
+ div_result = 1000000000000ll;
+ do_div(div_result, total_w * total_h * refresh);
+ var->pixclock = (u32)div_result;
+
+ return ret;
+}
+
+static int __init pxa168fb_probe(struct platform_device *pdev)
+{
+ struct pxa168fb_mach_info *mi;
+ struct fb_info *info = 0;
+ struct pxa168fb_info *fbi = 0;
+ struct resource *res;
+ struct clk *clk;
+ int irq, ret;
+
+ mi = pdev->dev.platform_data;
+ if (mi == NULL) {
+ dev_err(&pdev->dev, "no platform data defined\n");
+ return -EINVAL;
+ }
+
+ clk = clk_get(&pdev->dev, "LCDCLK");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "unable to get LCDCLK");
+ return PTR_ERR(clk);
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "no IO memory defined\n");
+ return -ENOENT;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no IRQ defined\n");
+ return -ENOENT;
+ }
+
+ info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev);
+ if (info == NULL) {
+ clk_put(clk);
+ return -ENOMEM;
+ }
+
+ /* Initialize private data */
+ fbi = info->par;
+ fbi->info = info;
+ fbi->clk = clk;
+ fbi->dev = info->dev = &pdev->dev;
+ fbi->panel_rbswap = mi->panel_rbswap;
+ fbi->is_blanked = 0;
+ fbi->active = mi->active;
+
+ /*
+ * Initialise static fb parameters.
+ */
+ info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK |
+ FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
+ info->node = -1;
+ strlcpy(info->fix.id, mi->id, 16);
+ info->fix.type = FB_TYPE_PACKED_PIXELS;
+ info->fix.type_aux = 0;
+ info->fix.xpanstep = 0;
+ info->fix.ypanstep = 0;
+ info->fix.ywrapstep = 0;
+ info->fix.mmio_start = res->start;
+ info->fix.mmio_len = res->end - res->start + 1;
+ info->fix.accel = FB_ACCEL_NONE;
+ info->fbops = &pxa168fb_ops;
+ info->pseudo_palette = fbi->pseudo_palette;
+
+ /*
+ * Map LCD controller registers.
+ */
+ fbi->reg_base = ioremap_nocache(res->start, res->end - res->start);
+ if (fbi->reg_base == NULL) {
+ ret = -ENOMEM;
+ goto failed;
+ }
+
+ /*
+ * Allocate framebuffer memory.
+ */
+ info->fix.smem_len = PAGE_ALIGN(DEFAULT_FB_SIZE);
+
+ info->screen_base = dma_alloc_writecombine(fbi->dev, info->fix.smem_len,
+ &fbi->fb_start_dma, GFP_KERNEL);
+ if (info->screen_base == NULL) {
+ ret = -ENOMEM;
+ goto failed;
+ }
+
+ info->fix.smem_start = (unsigned long)fbi->fb_start_dma;
+
+ /*
+ * Set video mode according to platform data.
+ */
+ set_mode(fbi, &info->var, mi->modes, mi->pix_fmt, 1);
+
+ fb_videomode_to_modelist(mi->modes, mi->num_modes, &info->modelist);
+
+ /*
+ * init video mode data.
+ */
+ pxa168fb_init_mode(info, mi);
+
+ ret = pxa168fb_check_var(&info->var, info);
+ if (ret)
+ goto failed_free_fbmem;
+
+ /*
+ * Fill in sane defaults.
+ */
+ ret = pxa168fb_check_var(&info->var, info);
+ if (ret)
+ goto failed;
+
+ /*
+ * enable controller clock
+ */
+ clk_enable(fbi->clk);
+
+ pxa168fb_set_par(info);
+
+ /*
+ * Configure default register values.
+ */
+ writel(0, fbi->reg_base + LCD_SPU_BLANKCOLOR);
+ writel(mi->io_pin_allocation_mode, fbi->reg_base + SPU_IOPAD_CONTROL);
+ writel(0, fbi->reg_base + LCD_CFG_GRA_START_ADDR1);
+ writel(0, fbi->reg_base + LCD_SPU_GRA_OVSA_HPXL_VLN);
+ writel(0, fbi->reg_base + LCD_SPU_SRAM_PARA0);
+ writel(CFG_CSB_256x32(0x1)|CFG_CSB_256x24(0x1)|CFG_CSB_256x8(0x1),
+ fbi->reg_base + LCD_SPU_SRAM_PARA1);
+
+ /*
+ * Allocate color map.
+ */
+ if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
+ ret = -ENOMEM;
+ goto failed_free_clk;
+ }
+
+ /*
+ * Register irq handler.
+ */
+ ret = request_irq(irq, pxa168fb_handle_irq, IRQF_SHARED,
+ info->fix.id, fbi);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "unable to request IRQ\n");
+ ret = -ENXIO;
+ goto failed_free_cmap;
+ }
+
+ /*
+ * Enable GFX interrupt
+ */
+ writel(GRA_FRAME_IRQ0_ENA(0x1), fbi->reg_base + SPU_IRQ_ENA);
+
+ /*
+ * Register framebuffer.
+ */
+ ret = register_framebuffer(info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register pxa168-fb: %d\n", ret);
+ ret = -ENXIO;
+ goto failed_free_irq;
+ }
+
+ platform_set_drvdata(pdev, fbi);
+ return 0;
+
+failed_free_irq:
+ free_irq(irq, fbi);
+failed_free_cmap:
+ fb_dealloc_cmap(&info->cmap);
+failed_free_clk:
+ clk_disable(fbi->clk);
+failed_free_fbmem:
+ dma_free_coherent(fbi->dev, info->fix.smem_len,
+ info->screen_base, fbi->fb_start_dma);
+failed:
+ kfree(info);
+ clk_put(clk);
+
+ dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret);
+ return ret;
+}
+
+static struct platform_driver pxa168fb_driver = {
+ .driver = {
+ .name = "pxa168-fb",
+ .owner = THIS_MODULE,
+ },
+ .probe = pxa168fb_probe,
+};
+
+static int __devinit pxa168fb_init(void)
+{
+ return platform_driver_register(&pxa168fb_driver);
+}
+module_init(pxa168fb_init);
+
+MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> "
+ "Green Wan <gwan@marvell.com>");
+MODULE_DESCRIPTION("Framebuffer driver for PXA168/910");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/pxa168fb.h b/drivers/video/pxa168fb.h
new file mode 100644
index 0000000..eee0927
--- /dev/null
+++ b/drivers/video/pxa168fb.h
@@ -0,0 +1,558 @@
+#ifndef __PXA168FB_H__
+#define __PXA168FB_H__
+
+/* ------------< LCD register >------------ */
+/* Video Frame 0&1 start address registers */
+#define LCD_SPU_DMA_START_ADDR_Y0 0x00C0
+#define LCD_SPU_DMA_START_ADDR_U0 0x00C4
+#define LCD_SPU_DMA_START_ADDR_V0 0x00C8
+#define LCD_CFG_DMA_START_ADDR_0 0x00CC /* Cmd address */
+#define LCD_SPU_DMA_START_ADDR_Y1 0x00D0
+#define LCD_SPU_DMA_START_ADDR_U1 0x00D4
+#define LCD_SPU_DMA_START_ADDR_V1 0x00D8
+#define LCD_CFG_DMA_START_ADDR_1 0x00DC /* Cmd address */
+
+/* YC & UV Pitch */
+#define LCD_SPU_DMA_PITCH_YC 0x00E0
+#define SPU_DMA_PITCH_C(c) ((c) << 16)
+#define SPU_DMA_PITCH_Y(y) (y)
+#define LCD_SPU_DMA_PITCH_UV 0x00E4
+#define SPU_DMA_PITCH_V(v) ((v) << 16)
+#define SPU_DMA_PITCH_U(u) (u)
+
+/* Video Starting Point on Screen Register */
+#define LCD_SPUT_DMA_OVSA_HPXL_VLN 0x00E8
+#define CFG_DMA_OVSA_VLN(y) ((y) << 16) /* 0~0xfff */
+#define CFG_DMA_OVSA_HPXL(x) (x) /* 0~0xfff */
+
+/* Video Size Register */
+#define LCD_SPU_DMA_HPXL_VLN 0x00EC
+#define CFG_DMA_VLN(y) ((y) << 16)
+#define CFG_DMA_HPXL(x) (x)
+
+/* Video Size After zooming Register */
+#define LCD_SPU_DZM_HPXL_VLN 0x00F0
+#define CFG_DZM_VLN(y) ((y) << 16)
+#define CFG_DZM_HPXL(x) (x)
+
+/* Graphic Frame 0&1 Starting Address Register */
+#define LCD_CFG_GRA_START_ADDR0 0x00F4
+#define LCD_CFG_GRA_START_ADDR1 0x00F8
+
+/* Graphic Frame Pitch */
+#define LCD_CFG_GRA_PITCH 0x00FC
+
+/* Graphic Starting Point on Screen Register */
+#define LCD_SPU_GRA_OVSA_HPXL_VLN 0x0100
+#define CFG_GRA_OVSA_VLN(y) ((y) << 16)
+#define CFG_GRA_OVSA_HPXL(x) (x)
+
+/* Graphic Size Register */
+#define LCD_SPU_GRA_HPXL_VLN 0x0104
+#define CFG_GRA_VLN(y) ((y) << 16)
+#define CFG_GRA_HPXL(x) (x)
+
+/* Graphic Size after Zooming Register */
+#define LCD_SPU_GZM_HPXL_VLN 0x0108
+#define CFG_GZM_VLN(y) ((y) << 16)
+#define CFG_GZM_HPXL(x) (x)
+
+/* HW Cursor Starting Point on Screen Register */
+#define LCD_SPU_HWC_OVSA_HPXL_VLN 0x010C
+#define CFG_HWC_OVSA_VLN(y) ((y) << 16)
+#define CFG_HWC_OVSA_HPXL(x) (x)
+
+/* HW Cursor Size */
+#define LCD_SPU_HWC_HPXL_VLN 0x0110
+#define CFG_HWC_VLN(y) ((y) << 16)
+#define CFG_HWC_HPXL(x) (x)
+
+/* Total Screen Size Register */
+#define LCD_SPUT_V_H_TOTAL 0x0114
+#define CFG_V_TOTAL(y) ((y) << 16)
+#define CFG_H_TOTAL(x) (x)
+
+/* Total Screen Active Size Register */
+#define LCD_SPU_V_H_ACTIVE 0x0118
+#define CFG_V_ACTIVE(y) ((y) << 16)
+#define CFG_H_ACTIVE(x) (x)
+
+/* Screen H&V Porch Register */
+#define LCD_SPU_H_PORCH 0x011C
+#define CFG_H_BACK_PORCH(b) ((b) << 16)
+#define CFG_H_FRONT_PORCH(f) (f)
+#define LCD_SPU_V_PORCH 0x0120
+#define CFG_V_BACK_PORCH(b) ((b) << 16)
+#define CFG_V_FRONT_PORCH(f) (f)
+
+/* Screen Blank Color Register */
+#define LCD_SPU_BLANKCOLOR 0x0124
+#define CFG_BLANKCOLOR_MASK 0x00FFFFFF
+#define CFG_BLANKCOLOR_R_MASK 0x000000FF
+#define CFG_BLANKCOLOR_G_MASK 0x0000FF00
+#define CFG_BLANKCOLOR_B_MASK 0x00FF0000
+
+/* HW Cursor Color 1&2 Register */
+#define LCD_SPU_ALPHA_COLOR1 0x0128
+#define CFG_HWC_COLOR1 0x00FFFFFF
+#define CFG_HWC_COLOR1_R(red) ((red) << 16)
+#define CFG_HWC_COLOR1_G(green) ((green) << 8)
+#define CFG_HWC_COLOR1_B(blue) (blue)
+#define CFG_HWC_COLOR1_R_MASK 0x000000FF
+#define CFG_HWC_COLOR1_G_MASK 0x0000FF00
+#define CFG_HWC_COLOR1_B_MASK 0x00FF0000
+#define LCD_SPU_ALPHA_COLOR2 0x012C
+#define CFG_HWC_COLOR2 0x00FFFFFF
+#define CFG_HWC_COLOR2_R_MASK 0x000000FF
+#define CFG_HWC_COLOR2_G_MASK 0x0000FF00
+#define CFG_HWC_COLOR2_B_MASK 0x00FF0000
+
+/* Video YUV Color Key Control */
+#define LCD_SPU_COLORKEY_Y 0x0130
+#define CFG_CKEY_Y2(y2) ((y2) << 24)
+#define CFG_CKEY_Y2_MASK 0xFF000000
+#define CFG_CKEY_Y1(y1) ((y1) << 16)
+#define CFG_CKEY_Y1_MASK 0x00FF0000
+#define CFG_CKEY_Y(y) ((y) << 8)
+#define CFG_CKEY_Y_MASK 0x0000FF00
+#define CFG_ALPHA_Y(y) (y)
+#define CFG_ALPHA_Y_MASK 0x000000FF
+#define LCD_SPU_COLORKEY_U 0x0134
+#define CFG_CKEY_U2(u2) ((u2) << 24)
+#define CFG_CKEY_U2_MASK 0xFF000000
+#define CFG_CKEY_U1(u1) ((u1) << 16)
+#define CFG_CKEY_U1_MASK 0x00FF0000
+#define CFG_CKEY_U(u) ((u) << 8)
+#define CFG_CKEY_U_MASK 0x0000FF00
+#define CFG_ALPHA_U(u) (u)
+#define CFG_ALPHA_U_MASK 0x000000FF
+#define LCD_SPU_COLORKEY_V 0x0138
+#define CFG_CKEY_V2(v2) ((v2) << 24)
+#define CFG_CKEY_V2_MASK 0xFF000000
+#define CFG_CKEY_V1(v1) ((v1) << 16)
+#define CFG_CKEY_V1_MASK 0x00FF0000
+#define CFG_CKEY_V(v) ((v) << 8)
+#define CFG_CKEY_V_MASK 0x0000FF00
+#define CFG_ALPHA_V(v) (v)
+#define CFG_ALPHA_V_MASK 0x000000FF
+
+/* SPI Read Data Register */
+#define LCD_SPU_SPI_RXDATA 0x0140
+
+/* Smart Panel Read Data Register */
+#define LCD_SPU_ISA_RSDATA 0x0144
+#define ISA_RXDATA_16BIT_1_DATA_MASK 0x000000FF
+#define ISA_RXDATA_16BIT_2_DATA_MASK 0x0000FF00
+#define ISA_RXDATA_16BIT_3_DATA_MASK 0x00FF0000
+#define ISA_RXDATA_16BIT_4_DATA_MASK 0xFF000000
+#define ISA_RXDATA_32BIT_1_DATA_MASK 0x00FFFFFF
+
+/* HWC SRAM Read Data Register */
+#define LCD_SPU_HWC_RDDAT 0x0158
+
+/* Gamma Table SRAM Read Data Register */
+#define LCD_SPU_GAMMA_RDDAT 0x015c
+#define CFG_GAMMA_RDDAT_MASK 0x000000FF
+
+/* Palette Table SRAM Read Data Register */
+#define LCD_SPU_PALETTE_RDDAT 0x0160
+#define CFG_PALETTE_RDDAT_MASK 0x00FFFFFF
+
+/* I/O Pads Input Read Only Register */
+#define LCD_SPU_IOPAD_IN 0x0178
+#define CFG_IOPAD_IN_MASK 0x0FFFFFFF
+
+/* Reserved Read Only Registers */
+#define LCD_CFG_RDREG5F 0x017C
+#define IRE_FRAME_CNT_MASK 0x000000C0
+#define IPE_FRAME_CNT_MASK 0x00000030
+#define GRA_FRAME_CNT_MASK 0x0000000C /* Graphic */
+#define DMA_FRAME_CNT_MASK 0x00000003 /* Video */
+
+/* SPI Control Register. */
+#define LCD_SPU_SPI_CTRL 0x0180
+#define CFG_SCLKCNT(div) ((div) << 24) /* 0xFF~0x2 */
+#define CFG_SCLKCNT_MASK 0xFF000000
+#define CFG_RXBITS(rx) ((rx) << 16) /* 0x1F~0x1 */
+#define CFG_RXBITS_MASK 0x00FF0000
+#define CFG_TXBITS(tx) ((tx) << 8) /* 0x1F~0x1 */
+#define CFG_TXBITS_MASK 0x0000FF00
+#define CFG_CLKINV(clk) ((clk) << 7)
+#define CFG_CLKINV_MASK 0x00000080
+#define CFG_KEEPXFER(transfer) ((transfer) << 6)
+#define CFG_KEEPXFER_MASK 0x00000040
+#define CFG_RXBITSTO0(rx) ((rx) << 5)
+#define CFG_RXBITSTO0_MASK 0x00000020
+#define CFG_TXBITSTO0(tx) ((tx) << 4)
+#define CFG_TXBITSTO0_MASK 0x00000010
+#define CFG_SPI_ENA(spi) ((spi) << 3)
+#define CFG_SPI_ENA_MASK 0x00000008
+#define CFG_SPI_SEL(spi) ((spi) << 2)
+#define CFG_SPI_SEL_MASK 0x00000004
+#define CFG_SPI_3W4WB(wire) ((wire) << 1)
+#define CFG_SPI_3W4WB_MASK 0x00000002
+#define CFG_SPI_START(start) (start)
+#define CFG_SPI_START_MASK 0x00000001
+
+/* SPI Tx Data Register */
+#define LCD_SPU_SPI_TXDATA 0x0184
+
+/*
+ 1. Smart Pannel 8-bit Bus Control Register.
+ 2. AHB Slave Path Data Port Register
+*/
+#define LCD_SPU_SMPN_CTRL 0x0188
+
+/* DMA Control 0 Register */
+#define LCD_SPU_DMA_CTRL0 0x0190
+#define CFG_NOBLENDING(nb) ((nb) << 31)
+#define CFG_NOBLENDING_MASK 0x80000000
+#define CFG_GAMMA_ENA(gn) ((gn) << 30)
+#define CFG_GAMMA_ENA_MASK 0x40000000
+#define CFG_CBSH_ENA(cn) ((cn) << 29)
+#define CFG_CBSH_ENA_MASK 0x20000000
+#define CFG_PALETTE_ENA(pn) ((pn) << 28)
+#define CFG_PALETTE_ENA_MASK 0x10000000
+#define CFG_ARBFAST_ENA(an) ((an) << 27)
+#define CFG_ARBFAST_ENA_MASK 0x08000000
+#define CFG_HWC_1BITMOD(mode) ((mode) << 26)
+#define CFG_HWC_1BITMOD_MASK 0x04000000
+#define CFG_HWC_1BITENA(mn) ((mn) << 25)
+#define CFG_HWC_1BITENA_MASK 0x02000000
+#define CFG_HWC_ENA(cn) ((cn) << 24)
+#define CFG_HWC_ENA_MASK 0x01000000
+#define CFG_DMAFORMAT(dmaformat) ((dmaformat) << 20)
+#define CFG_DMAFORMAT_MASK 0x00F00000
+#define CFG_GRAFORMAT(graformat) ((graformat) << 16)
+#define CFG_GRAFORMAT_MASK 0x000F0000
+/* for graphic part */
+#define CFG_GRA_FTOGGLE(toggle) ((toggle) << 15)
+#define CFG_GRA_FTOGGLE_MASK 0x00008000
+#define CFG_GRA_HSMOOTH(smooth) ((smooth) << 14)
+#define CFG_GRA_HSMOOTH_MASK 0x00004000
+#define CFG_GRA_TSTMODE(test) ((test) << 13)
+#define CFG_GRA_TSTMODE_MASK 0x00002000
+#define CFG_GRA_SWAPRB(swap) ((swap) << 12)
+#define CFG_GRA_SWAPRB_MASK 0x00001000
+#define CFG_GRA_SWAPUV(swap) ((swap) << 11)
+#define CFG_GRA_SWAPUV_MASK 0x00000800
+#define CFG_GRA_SWAPYU(swap) ((swap) << 10)
+#define CFG_GRA_SWAPYU_MASK 0x00000400
+#define CFG_YUV2RGB_GRA(cvrt) ((cvrt) << 9)
+#define CFG_YUV2RGB_GRA_MASK 0x00000200
+#define CFG_GRA_ENA(gra) ((gra) << 8)
+#define CFG_GRA_ENA_MASK 0x00000100
+/* for video part */
+#define CFG_DMA_FTOGGLE(toggle) ((toggle) << 7)
+#define CFG_DMA_FTOGGLE_MASK 0x00000080
+#define CFG_DMA_HSMOOTH(smooth) ((smooth) << 6)
+#define CFG_DMA_HSMOOTH_MASK 0x00000040
+#define CFG_DMA_TSTMODE(test) ((test) << 5)
+#define CFG_DMA_TSTMODE_MASK 0x00000020
+#define CFG_DMA_SWAPRB(swap) ((swap) << 4)
+#define CFG_DMA_SWAPRB_MASK 0x00000010
+#define CFG_DMA_SWAPUV(swap) ((swap) << 3)
+#define CFG_DMA_SWAPUV_MASK 0x00000008
+#define CFG_DMA_SWAPYU(swap) ((swap) << 2)
+#define CFG_DMA_SWAPYU_MASK 0x00000004
+#define CFG_DMA_SWAP_MASK 0x0000001C
+#define CFG_YUV2RGB_DMA(cvrt) ((cvrt) << 1)
+#define CFG_YUV2RGB_DMA_MASK 0x00000002
+#define CFG_DMA_ENA(video) (video)
+#define CFG_DMA_ENA_MASK 0x00000001
+
+/* DMA Control 1 Register */
+#define LCD_SPU_DMA_CTRL1 0x0194
+#define CFG_FRAME_TRIG(trig) ((trig) << 31)
+#define CFG_FRAME_TRIG_MASK 0x80000000
+#define CFG_VSYNC_TRIG(trig) ((trig) << 28)
+#define CFG_VSYNC_TRIG_MASK 0x70000000
+#define CFG_VSYNC_INV(inv) ((inv) << 27)
+#define CFG_VSYNC_INV_MASK 0x08000000
+#define CFG_COLOR_KEY_MODE(cmode) ((cmode) << 24)
+#define CFG_COLOR_KEY_MASK 0x07000000
+#define CFG_CARRY(carry) ((carry) << 23)
+#define CFG_CARRY_MASK 0x00800000
+#define CFG_LNBUF_ENA(lnbuf) ((lnbuf) << 22)
+#define CFG_LNBUF_ENA_MASK 0x00400000
+#define CFG_GATED_ENA(gated) ((gated) << 21)
+#define CFG_GATED_ENA_MASK 0x00200000
+#define CFG_PWRDN_ENA(power) ((power) << 20)
+#define CFG_PWRDN_ENA_MASK 0x00100000
+#define CFG_DSCALE(dscale) ((dscale) << 18)
+#define CFG_DSCALE_MASK 0x000C0000
+#define CFG_ALPHA_MODE(amode) ((amode) << 16)
+#define CFG_ALPHA_MODE_MASK 0x00030000
+#define CFG_ALPHA(alpha) ((alpha) << 8)
+#define CFG_ALPHA_MASK 0x0000FF00
+#define CFG_PXLCMD(pxlcmd) (pxlcmd)
+#define CFG_PXLCMD_MASK 0x000000FF
+
+/* SRAM Control Register */
+#define LCD_SPU_SRAM_CTRL 0x0198
+#define CFG_SRAM_INIT_WR_RD(mode) ((mode) << 14)
+#define CFG_SRAM_INIT_WR_RD_MASK 0x0000C000
+#define CFG_SRAM_ADDR_LCDID(id) ((id) << 8)
+#define CFG_SRAM_ADDR_LCDID_MASK 0x00000F00
+#define CFG_SRAM_ADDR(addr) (addr)
+#define CFG_SRAM_ADDR_MASK 0x000000FF
+
+/* SRAM Write Data Register */
+#define LCD_SPU_SRAM_WRDAT 0x019C
+
+/* SRAM RTC/WTC Control Register */
+#define LCD_SPU_SRAM_PARA0 0x01A0
+
+/* SRAM Power Down Control Register */
+#define LCD_SPU_SRAM_PARA1 0x01A4
+#define CFG_CSB_256x32(hwc) ((hwc) << 15) /* HWC */
+#define CFG_CSB_256x32_MASK 0x00008000
+#define CFG_CSB_256x24(palette) ((palette) << 14) /* Palette */
+#define CFG_CSB_256x24_MASK 0x00004000
+#define CFG_CSB_256x8(gamma) ((gamma) << 13) /* Gamma */
+#define CFG_CSB_256x8_MASK 0x00002000
+#define CFG_PDWN256x32(pdwn) ((pdwn) << 7) /* HWC */
+#define CFG_PDWN256x32_MASK 0x00000080
+#define CFG_PDWN256x24(pdwn) ((pdwn) << 6) /* Palette */
+#define CFG_PDWN256x24_MASK 0x00000040
+#define CFG_PDWN256x8(pdwn) ((pdwn) << 5) /* Gamma */
+#define CFG_PDWN256x8_MASK 0x00000020
+#define CFG_PDWN32x32(pdwn) ((pdwn) << 3)
+#define CFG_PDWN32x32_MASK 0x00000008
+#define CFG_PDWN16x66(pdwn) ((pdwn) << 2)
+#define CFG_PDWN16x66_MASK 0x00000004
+#define CFG_PDWN32x66(pdwn) ((pdwn) << 1)
+#define CFG_PDWN32x66_MASK 0x00000002
+#define CFG_PDWN64x66(pdwn) (pdwn)
+#define CFG_PDWN64x66_MASK 0x00000001
+
+/* Smart or Dumb Panel Clock Divider */
+#define LCD_CFG_SCLK_DIV 0x01A8
+#define SCLK_SOURCE_SELECT(src) ((src) << 31)
+#define SCLK_SOURCE_SELECT_MASK 0x80000000
+#define CLK_FRACDIV(frac) ((frac) << 16)
+#define CLK_FRACDIV_MASK 0x0FFF0000
+#define CLK_INT_DIV(div) (div)
+#define CLK_INT_DIV_MASK 0x0000FFFF
+
+/* Video Contrast Register */
+#define LCD_SPU_CONTRAST 0x01AC
+#define CFG_BRIGHTNESS(bright) ((bright) << 16)
+#define CFG_BRIGHTNESS_MASK 0xFFFF0000
+#define CFG_CONTRAST(contrast) (contrast)
+#define CFG_CONTRAST_MASK 0x0000FFFF
+
+/* Video Saturation Register */
+#define LCD_SPU_SATURATION 0x01B0
+#define CFG_C_MULTS(mult) ((mult) << 16)
+#define CFG_C_MULTS_MASK 0xFFFF0000
+#define CFG_SATURATION(sat) (sat)
+#define CFG_SATURATION_MASK 0x0000FFFF
+
+/* Video Hue Adjust Register */
+#define LCD_SPU_CBSH_HUE 0x01B4
+#define CFG_SIN0(sin0) ((sin0) << 16)
+#define CFG_SIN0_MASK 0xFFFF0000
+#define CFG_COS0(con0) (con0)
+#define CFG_COS0_MASK 0x0000FFFF
+
+/* Dump LCD Panel Control Register */
+#define LCD_SPU_DUMB_CTRL 0x01B8
+#define CFG_DUMBMODE(mode) ((mode) << 28)
+#define CFG_DUMBMODE_MASK 0xF0000000
+#define CFG_LCDGPIO_O(data) ((data) << 20)
+#define CFG_LCDGPIO_O_MASK 0x0FF00000
+#define CFG_LCDGPIO_ENA(gpio) ((gpio) << 12)
+#define CFG_LCDGPIO_ENA_MASK 0x000FF000
+#define CFG_BIAS_OUT(bias) ((bias) << 8)
+#define CFG_BIAS_OUT_MASK 0x00000100
+#define CFG_REVERSE_RGB(rRGB) ((rRGB) << 7)
+#define CFG_REVERSE_RGB_MASK 0x00000080
+#define CFG_INV_COMPBLANK(blank) ((blank) << 6)
+#define CFG_INV_COMPBLANK_MASK 0x00000040
+#define CFG_INV_COMPSYNC(sync) ((sync) << 5)
+#define CFG_INV_COMPSYNC_MASK 0x00000020
+#define CFG_INV_HENA(hena) ((hena) << 4)
+#define CFG_INV_HENA_MASK 0x00000010
+#define CFG_INV_VSYNC(vsync) ((vsync) << 3)
+#define CFG_INV_VSYNC_MASK 0x00000008
+#define CFG_INV_HSYNC(hsync) ((hsync) << 2)
+#define CFG_INV_HSYNC_MASK 0x00000004
+#define CFG_INV_PCLK(pclk) ((pclk) << 1)
+#define CFG_INV_PCLK_MASK 0x00000002
+#define CFG_DUMB_ENA(dumb) (dumb)
+#define CFG_DUMB_ENA_MASK 0x00000001
+
+/* LCD I/O Pads Control Register */
+#define SPU_IOPAD_CONTROL 0x01BC
+#define CFG_GRA_VM_ENA(vm) ((vm) << 15) /* gfx */
+#define CFG_GRA_VM_ENA_MASK 0x00008000
+#define CFG_DMA_VM_ENA(vm) ((vm) << 13) /* video */
+#define CFG_DMA_VM_ENA_MASK 0x00002000
+#define CFG_CMD_VM_ENA(vm) ((vm) << 13)
+#define CFG_CMD_VM_ENA_MASK 0x00000800
+#define CFG_CSC(csc) ((csc) << 8) /* csc */
+#define CFG_CSC_MASK 0x00000300
+#define CFG_AXICTRL(axi) ((axi) << 4)
+#define CFG_AXICTRL_MASK 0x000000F0
+#define CFG_IOPADMODE(iopad) (iopad)
+#define CFG_IOPADMODE_MASK 0x0000000F
+
+/* LCD Interrupt Control Register */
+#define SPU_IRQ_ENA 0x01C0
+#define DMA_FRAME_IRQ0_ENA(irq) ((irq) << 31)
+#define DMA_FRAME_IRQ0_ENA_MASK 0x80000000
+#define DMA_FRAME_IRQ1_ENA(irq) ((irq) << 30)
+#define DMA_FRAME_IRQ1_ENA_MASK 0x40000000
+#define DMA_FF_UNDERFLOW_ENA(ff) ((ff) << 29)
+#define DMA_FF_UNDERFLOW_ENA_MASK 0x20000000
+#define GRA_FRAME_IRQ0_ENA(irq) ((irq) << 27)
+#define GRA_FRAME_IRQ0_ENA_MASK 0x08000000
+#define GRA_FRAME_IRQ1_ENA(irq) ((irq) << 26)
+#define GRA_FRAME_IRQ1_ENA_MASK 0x04000000
+#define GRA_FF_UNDERFLOW_ENA(ff) ((ff) << 25)
+#define GRA_FF_UNDERFLOW_ENA_MASK 0x02000000
+#define VSYNC_IRQ_ENA(vsync_irq) ((vsync_irq) << 23)
+#define VSYNC_IRQ_ENA_MASK 0x00800000
+#define DUMB_FRAMEDONE_ENA(fdone) ((fdone) << 22)
+#define DUMB_FRAMEDONE_ENA_MASK 0x00400000
+#define TWC_FRAMEDONE_ENA(fdone) ((fdone) << 21)
+#define TWC_FRAMEDONE_ENA_MASK 0x00200000
+#define HWC_FRAMEDONE_ENA(fdone) ((fdone) << 20)
+#define HWC_FRAMEDONE_ENA_MASK 0x00100000
+#define SLV_IRQ_ENA(irq) ((irq) << 19)
+#define SLV_IRQ_ENA_MASK 0x00080000
+#define SPI_IRQ_ENA(irq) ((irq) << 18)
+#define SPI_IRQ_ENA_MASK 0x00040000
+#define PWRDN_IRQ_ENA(irq) ((irq) << 17)
+#define PWRDN_IRQ_ENA_MASK 0x00020000
+#define ERR_IRQ_ENA(irq) ((irq) << 16)
+#define ERR_IRQ_ENA_MASK 0x00010000
+#define CLEAN_SPU_IRQ_ISR(irq) (irq)
+#define CLEAN_SPU_IRQ_ISR_MASK 0x0000FFFF
+
+/* LCD Interrupt Status Register */
+#define SPU_IRQ_ISR 0x01C4
+#define DMA_FRAME_IRQ0(irq) ((irq) << 31)
+#define DMA_FRAME_IRQ0_MASK 0x80000000
+#define DMA_FRAME_IRQ1(irq) ((irq) << 30)
+#define DMA_FRAME_IRQ1_MASK 0x40000000
+#define DMA_FF_UNDERFLOW(ff) ((ff) << 29)
+#define DMA_FF_UNDERFLOW_MASK 0x20000000
+#define GRA_FRAME_IRQ0(irq) ((irq) << 27)
+#define GRA_FRAME_IRQ0_MASK 0x08000000
+#define GRA_FRAME_IRQ1(irq) ((irq) << 26)
+#define GRA_FRAME_IRQ1_MASK 0x04000000
+#define GRA_FF_UNDERFLOW(ff) ((ff) << 25)
+#define GRA_FF_UNDERFLOW_MASK 0x02000000
+#define VSYNC_IRQ(vsync_irq) ((vsync_irq) << 23)
+#define VSYNC_IRQ_MASK 0x00800000
+#define DUMB_FRAMEDONE(fdone) ((fdone) << 22)
+#define DUMB_FRAMEDONE_MASK 0x00400000
+#define TWC_FRAMEDONE(fdone) ((fdone) << 21)
+#define TWC_FRAMEDONE_MASK 0x00200000
+#define HWC_FRAMEDONE(fdone) ((fdone) << 20)
+#define HWC_FRAMEDONE_MASK 0x00100000
+#define SLV_IRQ(irq) ((irq) << 19)
+#define SLV_IRQ_MASK 0x00080000
+#define SPI_IRQ(irq) ((irq) << 18)
+#define SPI_IRQ_MASK 0x00040000
+#define PWRDN_IRQ(irq) ((irq) << 17)
+#define PWRDN_IRQ_MASK 0x00020000
+#define ERR_IRQ(irq) ((irq) << 16)
+#define ERR_IRQ_MASK 0x00010000
+/* read-only */
+#define DMA_FRAME_IRQ0_LEVEL_MASK 0x00008000
+#define DMA_FRAME_IRQ1_LEVEL_MASK 0x00004000
+#define DMA_FRAME_CNT_ISR_MASK 0x00003000
+#define GRA_FRAME_IRQ0_LEVEL_MASK 0x00000800
+#define GRA_FRAME_IRQ1_LEVEL_MASK 0x00000400
+#define GRA_FRAME_CNT_ISR_MASK 0x00000300
+#define VSYNC_IRQ_LEVEL_MASK 0x00000080
+#define DUMB_FRAMEDONE_LEVEL_MASK 0x00000040
+#define TWC_FRAMEDONE_LEVEL_MASK 0x00000020
+#define HWC_FRAMEDONE_LEVEL_MASK 0x00000010
+#define SLV_FF_EMPTY_MASK 0x00000008
+#define DMA_FF_ALLEMPTY_MASK 0x00000004
+#define GRA_FF_ALLEMPTY_MASK 0x00000002
+#define PWRDN_IRQ_LEVEL_MASK 0x00000001
+
+
+/*
+ * defined Video Memory Color format for DMA control 0 register
+ * DMA0 bit[23:20]
+ */
+#define VMODE_RGB565 0x0
+#define VMODE_RGB1555 0x1
+#define VMODE_RGB888PACKED 0x2
+#define VMODE_RGB888UNPACKED 0x3
+#define VMODE_RGBA888 0x4
+#define VMODE_YUV422PACKED 0x5
+#define VMODE_YUV422PLANAR 0x6
+#define VMODE_YUV420PLANAR 0x7
+#define VMODE_SMPNCMD 0x8
+#define VMODE_PALETTE4BIT 0x9
+#define VMODE_PALETTE8BIT 0xa
+#define VMODE_RESERVED 0xb
+
+/*
+ * defined Graphic Memory Color format for DMA control 0 register
+ * DMA0 bit[19:16]
+ */
+#define GMODE_RGB565 0x0
+#define GMODE_RGB1555 0x1
+#define GMODE_RGB888PACKED 0x2
+#define GMODE_RGB888UNPACKED 0x3
+#define GMODE_RGBA888 0x4
+#define GMODE_YUV422PACKED 0x5
+#define GMODE_YUV422PLANAR 0x6
+#define GMODE_YUV420PLANAR 0x7
+#define GMODE_SMPNCMD 0x8
+#define GMODE_PALETTE4BIT 0x9
+#define GMODE_PALETTE8BIT 0xa
+#define GMODE_RESERVED 0xb
+
+/*
+ * define for DMA control 1 register
+ */
+#define DMA1_FRAME_TRIG 31 /* bit location */
+#define DMA1_VSYNC_MODE 28
+#define DMA1_VSYNC_INV 27
+#define DMA1_CKEY 24
+#define DMA1_CARRY 23
+#define DMA1_LNBUF_ENA 22
+#define DMA1_GATED_ENA 21
+#define DMA1_PWRDN_ENA 20
+#define DMA1_DSCALE 18
+#define DMA1_ALPHA_MODE 16
+#define DMA1_ALPHA 08
+#define DMA1_PXLCMD 00
+
+/*
+ * defined for Configure Dumb Mode
+ * DUMB LCD Panel bit[31:28]
+ */
+#define DUMB16_RGB565_0 0x0
+#define DUMB16_RGB565_1 0x1
+#define DUMB18_RGB666_0 0x2
+#define DUMB18_RGB666_1 0x3
+#define DUMB12_RGB444_0 0x4
+#define DUMB12_RGB444_1 0x5
+#define DUMB24_RGB888_0 0x6
+#define DUMB_BLANK 0x7
+
+/*
+ * defined for Configure I/O Pin Allocation Mode
+ * LCD LCD I/O Pads control register bit[3:0]
+ */
+#define IOPAD_DUMB24 0x0
+#define IOPAD_DUMB18SPI 0x1
+#define IOPAD_DUMB18GPIO 0x2
+#define IOPAD_DUMB16SPI 0x3
+#define IOPAD_DUMB16GPIO 0x4
+#define IOPAD_DUMB12 0x5
+#define IOPAD_SMART18SPI 0x6
+#define IOPAD_SMART16SPI 0x7
+#define IOPAD_SMART8BOTH 0x8
+
+#endif /* __PXA168FB_H__ */
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 5eb8f21..5744cac 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -231,14 +231,14 @@ config DAVINCI_WATCHDOG
NOTE: once enabled, this timer cannot be disabled.
Say N if you are unsure.
-config ORION5X_WATCHDOG
- tristate "Orion5x watchdog"
- depends on ARCH_ORION5X
+config ORION_WATCHDOG
+ tristate "Orion watchdog"
+ depends on ARCH_ORION5X || ARCH_KIRKWOOD
help
Say Y here if to include support for the watchdog timer
- in the Orion5x ARM SoCs.
+ in the Marvell Orion5x and Kirkwood ARM SoCs.
To compile this driver as a module, choose M here: the
- module will be called orion5x_wdt.
+ module will be called orion_wdt.
# AVR32 Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 7f8c56b..c3afa14 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -40,7 +40,7 @@ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
-obj-$(CONFIG_ORION5X_WATCHDOG) += orion5x_wdt.o
+obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion_wdt.c
index 2cde568..2d9fb96 100644
--- a/drivers/watchdog/orion5x_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -1,7 +1,7 @@
/*
- * drivers/watchdog/orion5x_wdt.c
+ * drivers/watchdog/orion_wdt.c
*
- * Watchdog driver for Orion5x processors
+ * Watchdog driver for Orion/Kirkwood processors
*
* Author: Sylver Bruneau <sylver.bruneau@googlemail.com>
*
@@ -23,7 +23,7 @@
#include <linux/io.h>
#include <linux/spinlock.h>
#include <mach/bridge-regs.h>
-#include <plat/orion5x_wdt.h>
+#include <plat/orion_wdt.h>
/*
* Watchdog timer block registers.
@@ -43,7 +43,7 @@ static unsigned int wdt_tclk;
static unsigned long wdt_status;
static spinlock_t wdt_lock;
-static void orion5x_wdt_ping(void)
+static void orion_wdt_ping(void)
{
spin_lock(&wdt_lock);
@@ -53,7 +53,7 @@ static void orion5x_wdt_ping(void)
spin_unlock(&wdt_lock);
}
-static void orion5x_wdt_enable(void)
+static void orion_wdt_enable(void)
{
u32 reg;
@@ -73,23 +73,23 @@ static void orion5x_wdt_enable(void)
writel(reg, TIMER_CTRL);
/* Enable reset on watchdog */
- reg = readl(CPU_RESET_MASK);
- reg |= WDT_RESET;
- writel(reg, CPU_RESET_MASK);
+ reg = readl(RSTOUTn_MASK);
+ reg |= WDT_RESET_OUT_EN;
+ writel(reg, RSTOUTn_MASK);
spin_unlock(&wdt_lock);
}
-static void orion5x_wdt_disable(void)
+static void orion_wdt_disable(void)
{
u32 reg;
spin_lock(&wdt_lock);
/* Disable reset on watchdog */
- reg = readl(CPU_RESET_MASK);
- reg &= ~WDT_RESET;
- writel(reg, CPU_RESET_MASK);
+ reg = readl(RSTOUTn_MASK);
+ reg &= ~WDT_RESET_OUT_EN;
+ writel(reg, RSTOUTn_MASK);
/* Disable watchdog timer */
reg = readl(TIMER_CTRL);
@@ -99,7 +99,7 @@ static void orion5x_wdt_disable(void)
spin_unlock(&wdt_lock);
}
-static int orion5x_wdt_get_timeleft(int *time_left)
+static int orion_wdt_get_timeleft(int *time_left)
{
spin_lock(&wdt_lock);
*time_left = readl(WDT_VAL) / wdt_tclk;
@@ -107,16 +107,16 @@ static int orion5x_wdt_get_timeleft(int *time_left)
return 0;
}
-static int orion5x_wdt_open(struct inode *inode, struct file *file)
+static int orion_wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(WDT_IN_USE, &wdt_status))
return -EBUSY;
clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
- orion5x_wdt_enable();
+ orion_wdt_enable();
return nonseekable_open(inode, file);
}
-static ssize_t orion5x_wdt_write(struct file *file, const char *data,
+static ssize_t orion_wdt_write(struct file *file, const char *data,
size_t len, loff_t *ppos)
{
if (len) {
@@ -133,18 +133,18 @@ static ssize_t orion5x_wdt_write(struct file *file, const char *data,
set_bit(WDT_OK_TO_CLOSE, &wdt_status);
}
}
- orion5x_wdt_ping();
+ orion_wdt_ping();
}
return len;
}
-static int orion5x_wdt_settimeout(int new_time)
+static int orion_wdt_settimeout(int new_time)
{
if ((new_time <= 0) || (new_time > wdt_max_duration))
return -EINVAL;
/* Set new watchdog time to be used when
- * orion5x_wdt_enable() or orion5x_wdt_ping() is called. */
+ * orion_wdt_enable() or orion_wdt_ping() is called. */
heartbeat = new_time;
return 0;
}
@@ -152,10 +152,10 @@ static int orion5x_wdt_settimeout(int new_time)
static const struct watchdog_info ident = {
.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
WDIOF_KEEPALIVEPING,
- .identity = "Orion5x Watchdog",
+ .identity = "Orion Watchdog",
};
-static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
+static long orion_wdt_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
int ret = -ENOTTY;
@@ -173,7 +173,7 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
break;
case WDIOC_KEEPALIVE:
- orion5x_wdt_ping();
+ orion_wdt_ping();
ret = 0;
break;
@@ -182,11 +182,11 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
if (ret)
break;
- if (orion5x_wdt_settimeout(time)) {
+ if (orion_wdt_settimeout(time)) {
ret = -EINVAL;
break;
}
- orion5x_wdt_ping();
+ orion_wdt_ping();
/* Fall through */
case WDIOC_GETTIMEOUT:
@@ -194,7 +194,7 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
break;
case WDIOC_GETTIMELEFT:
- if (orion5x_wdt_get_timeleft(&time)) {
+ if (orion_wdt_get_timeleft(&time)) {
ret = -EINVAL;
break;
}
@@ -204,10 +204,10 @@ static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
return ret;
}
-static int orion5x_wdt_release(struct inode *inode, struct file *file)
+static int orion_wdt_release(struct inode *inode, struct file *file)
{
if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
- orion5x_wdt_disable();
+ orion_wdt_disable();
else
printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - "
"timer will not stop\n");
@@ -218,98 +218,98 @@ static int orion5x_wdt_release(struct inode *inode, struct file *file)
}
-static const struct file_operations orion5x_wdt_fops = {
+static const struct file_operations orion_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
- .write = orion5x_wdt_write,
- .unlocked_ioctl = orion5x_wdt_ioctl,
- .open = orion5x_wdt_open,
- .release = orion5x_wdt_release,
+ .write = orion_wdt_write,
+ .unlocked_ioctl = orion_wdt_ioctl,
+ .open = orion_wdt_open,
+ .release = orion_wdt_release,
};
-static struct miscdevice orion5x_wdt_miscdev = {
+static struct miscdevice orion_wdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
- .fops = &orion5x_wdt_fops,
+ .fops = &orion_wdt_fops,
};
-static int __devinit orion5x_wdt_probe(struct platform_device *pdev)
+static int __devinit orion_wdt_probe(struct platform_device *pdev)
{
- struct orion5x_wdt_platform_data *pdata = pdev->dev.platform_data;
+ struct orion_wdt_platform_data *pdata = pdev->dev.platform_data;
int ret;
if (pdata) {
wdt_tclk = pdata->tclk;
} else {
- printk(KERN_ERR "Orion5x Watchdog misses platform data\n");
+ printk(KERN_ERR "Orion Watchdog misses platform data\n");
return -ENODEV;
}
- if (orion5x_wdt_miscdev.parent)
+ if (orion_wdt_miscdev.parent)
return -EBUSY;
- orion5x_wdt_miscdev.parent = &pdev->dev;
+ orion_wdt_miscdev.parent = &pdev->dev;
wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk;
- if (orion5x_wdt_settimeout(heartbeat))
+ if (orion_wdt_settimeout(heartbeat))
heartbeat = wdt_max_duration;
- ret = misc_register(&orion5x_wdt_miscdev);
+ ret = misc_register(&orion_wdt_miscdev);
if (ret)
return ret;
- printk(KERN_INFO "Orion5x Watchdog Timer: Initial timeout %d sec%s\n",
+ printk(KERN_INFO "Orion Watchdog Timer: Initial timeout %d sec%s\n",
heartbeat, nowayout ? ", nowayout" : "");
return 0;
}
-static int __devexit orion5x_wdt_remove(struct platform_device *pdev)
+static int __devexit orion_wdt_remove(struct platform_device *pdev)
{
int ret;
if (test_bit(WDT_IN_USE, &wdt_status)) {
- orion5x_wdt_disable();
+ orion_wdt_disable();
clear_bit(WDT_IN_USE, &wdt_status);
}
- ret = misc_deregister(&orion5x_wdt_miscdev);
+ ret = misc_deregister(&orion_wdt_miscdev);
if (!ret)
- orion5x_wdt_miscdev.parent = NULL;
+ orion_wdt_miscdev.parent = NULL;
return ret;
}
-static void orion5x_wdt_shutdown(struct platform_device *pdev)
+static void orion_wdt_shutdown(struct platform_device *pdev)
{
if (test_bit(WDT_IN_USE, &wdt_status))
- orion5x_wdt_disable();
+ orion_wdt_disable();
}
-static struct platform_driver orion5x_wdt_driver = {
- .probe = orion5x_wdt_probe,
- .remove = __devexit_p(orion5x_wdt_remove),
- .shutdown = orion5x_wdt_shutdown,
+static struct platform_driver orion_wdt_driver = {
+ .probe = orion_wdt_probe,
+ .remove = __devexit_p(orion_wdt_remove),
+ .shutdown = orion_wdt_shutdown,
.driver = {
.owner = THIS_MODULE,
- .name = "orion5x_wdt",
+ .name = "orion_wdt",
},
};
-static int __init orion5x_wdt_init(void)
+static int __init orion_wdt_init(void)
{
spin_lock_init(&wdt_lock);
- return platform_driver_register(&orion5x_wdt_driver);
+ return platform_driver_register(&orion_wdt_driver);
}
-static void __exit orion5x_wdt_exit(void)
+static void __exit orion_wdt_exit(void)
{
- platform_driver_unregister(&orion5x_wdt_driver);
+ platform_driver_unregister(&orion_wdt_driver);
}
-module_init(orion5x_wdt_init);
-module_exit(orion5x_wdt_exit);
+module_init(orion_wdt_init);
+module_exit(orion_wdt_exit);
MODULE_AUTHOR("Sylver Bruneau <sylver.bruneau@googlemail.com>");
-MODULE_DESCRIPTION("Orion5x Processor Watchdog");
+MODULE_DESCRIPTION("Orion Processor Watchdog");
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds");
diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h
new file mode 100644
index 0000000..dcad0ff
--- /dev/null
+++ b/include/linux/amba/pl022.h
@@ -0,0 +1,264 @@
+/*
+ * include/linux/amba/pl022.h
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * Initial version inspired by:
+ * linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
+ * Initial adoption to PL022 by:
+ * Sachin Verma <sachin.verma@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SSP_PL022_H
+#define _SSP_PL022_H
+
+#include <linux/device.h>
+
+/**
+ * whether SSP is in loopback mode or not
+ */
+enum ssp_loopback {
+ LOOPBACK_DISABLED,
+ LOOPBACK_ENABLED
+};
+
+/**
+ * enum ssp_interface - interfaces allowed for this SSP Controller
+ * @SSP_INTERFACE_MOTOROLA_SPI: Motorola Interface
+ * @SSP_INTERFACE_TI_SYNC_SERIAL: Texas Instrument Synchronous Serial
+ * interface
+ * @SSP_INTERFACE_NATIONAL_MICROWIRE: National Semiconductor Microwire
+ * interface
+ * @SSP_INTERFACE_UNIDIRECTIONAL: Unidirectional interface (STn8810
+ * &STn8815 only)
+ */
+enum ssp_interface {
+ SSP_INTERFACE_MOTOROLA_SPI,
+ SSP_INTERFACE_TI_SYNC_SERIAL,
+ SSP_INTERFACE_NATIONAL_MICROWIRE,
+ SSP_INTERFACE_UNIDIRECTIONAL
+};
+
+/**
+ * enum ssp_hierarchy - whether SSP is configured as Master or Slave
+ */
+enum ssp_hierarchy {
+ SSP_MASTER,
+ SSP_SLAVE
+};
+
+/**
+ * enum ssp_clock_params - clock parameters, to set SSP clock at a
+ * desired freq
+ */
+struct ssp_clock_params {
+ u8 cpsdvsr; /* value from 2 to 254 (even only!) */
+ u8 scr; /* value from 0 to 255 */
+};
+
+/**
+ * enum ssp_rx_endian - endianess of Rx FIFO Data
+ */
+enum ssp_rx_endian {
+ SSP_RX_MSB,
+ SSP_RX_LSB
+};
+
+/**
+ * enum ssp_tx_endian - endianess of Tx FIFO Data
+ */
+enum ssp_tx_endian {
+ SSP_TX_MSB,
+ SSP_TX_LSB
+};
+
+/**
+ * enum ssp_data_size - number of bits in one data element
+ */
+enum ssp_data_size {
+ SSP_DATA_BITS_4 = 0x03, SSP_DATA_BITS_5, SSP_DATA_BITS_6,
+ SSP_DATA_BITS_7, SSP_DATA_BITS_8, SSP_DATA_BITS_9,
+ SSP_DATA_BITS_10, SSP_DATA_BITS_11, SSP_DATA_BITS_12,
+ SSP_DATA_BITS_13, SSP_DATA_BITS_14, SSP_DATA_BITS_15,
+ SSP_DATA_BITS_16, SSP_DATA_BITS_17, SSP_DATA_BITS_18,
+ SSP_DATA_BITS_19, SSP_DATA_BITS_20, SSP_DATA_BITS_21,
+ SSP_DATA_BITS_22, SSP_DATA_BITS_23, SSP_DATA_BITS_24,
+ SSP_DATA_BITS_25, SSP_DATA_BITS_26, SSP_DATA_BITS_27,
+ SSP_DATA_BITS_28, SSP_DATA_BITS_29, SSP_DATA_BITS_30,
+ SSP_DATA_BITS_31, SSP_DATA_BITS_32
+};
+
+/**
+ * enum ssp_mode - SSP mode of operation (Communication modes)
+ */
+enum ssp_mode {
+ INTERRUPT_TRANSFER,
+ POLLING_TRANSFER,
+ DMA_TRANSFER
+};
+
+/**
+ * enum ssp_rx_level_trig - receive FIFO watermark level which triggers
+ * IT: Interrupt fires when _N_ or more elements in RX FIFO.
+ */
+enum ssp_rx_level_trig {
+ SSP_RX_1_OR_MORE_ELEM,
+ SSP_RX_4_OR_MORE_ELEM,
+ SSP_RX_8_OR_MORE_ELEM,
+ SSP_RX_16_OR_MORE_ELEM,
+ SSP_RX_32_OR_MORE_ELEM
+};
+
+/**
+ * Transmit FIFO watermark level which triggers (IT Interrupt fires
+ * when _N_ or more empty locations in TX FIFO)
+ */
+enum ssp_tx_level_trig {
+ SSP_TX_1_OR_MORE_EMPTY_LOC,
+ SSP_TX_4_OR_MORE_EMPTY_LOC,
+ SSP_TX_8_OR_MORE_EMPTY_LOC,
+ SSP_TX_16_OR_MORE_EMPTY_LOC,
+ SSP_TX_32_OR_MORE_EMPTY_LOC
+};
+
+/**
+ * enum SPI Clock Phase - clock phase (Motorola SPI interface only)
+ * @SSP_CLK_RISING_EDGE: Receive data on rising edge
+ * @SSP_CLK_FALLING_EDGE: Receive data on falling edge
+ */
+enum ssp_spi_clk_phase {
+ SSP_CLK_RISING_EDGE,
+ SSP_CLK_FALLING_EDGE
+};
+
+/**
+ * enum SPI Clock Polarity - clock polarity (Motorola SPI interface only)
+ * @SSP_CLK_POL_IDLE_LOW: Low inactive level
+ * @SSP_CLK_POL_IDLE_HIGH: High inactive level
+ */
+enum ssp_spi_clk_pol {
+ SSP_CLK_POL_IDLE_LOW,
+ SSP_CLK_POL_IDLE_HIGH
+};
+
+/**
+ * Microwire Conrol Lengths Command size in microwire format
+ */
+enum ssp_microwire_ctrl_len {
+ SSP_BITS_4 = 0x03, SSP_BITS_5, SSP_BITS_6,
+ SSP_BITS_7, SSP_BITS_8, SSP_BITS_9,
+ SSP_BITS_10, SSP_BITS_11, SSP_BITS_12,
+ SSP_BITS_13, SSP_BITS_14, SSP_BITS_15,
+ SSP_BITS_16, SSP_BITS_17, SSP_BITS_18,
+ SSP_BITS_19, SSP_BITS_20, SSP_BITS_21,
+ SSP_BITS_22, SSP_BITS_23, SSP_BITS_24,
+ SSP_BITS_25, SSP_BITS_26, SSP_BITS_27,
+ SSP_BITS_28, SSP_BITS_29, SSP_BITS_30,
+ SSP_BITS_31, SSP_BITS_32
+};
+
+/**
+ * enum Microwire Wait State
+ * @SSP_MWIRE_WAIT_ZERO: No wait state inserted after last command bit
+ * @SSP_MWIRE_WAIT_ONE: One wait state inserted after last command bit
+ */
+enum ssp_microwire_wait_state {
+ SSP_MWIRE_WAIT_ZERO,
+ SSP_MWIRE_WAIT_ONE
+};
+
+/**
+ * enum Microwire - whether Full/Half Duplex
+ * @SSP_MICROWIRE_CHANNEL_FULL_DUPLEX: SSPTXD becomes bi-directional,
+ * SSPRXD not used
+ * @SSP_MICROWIRE_CHANNEL_HALF_DUPLEX: SSPTXD is an output, SSPRXD is
+ * an input.
+ */
+enum ssp_duplex {
+ SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+ SSP_MICROWIRE_CHANNEL_HALF_DUPLEX
+};
+
+/**
+ * CHIP select/deselect commands
+ */
+enum ssp_chip_select {
+ SSP_CHIP_SELECT,
+ SSP_CHIP_DESELECT
+};
+
+
+/**
+ * struct pl022_ssp_master - device.platform_data for SPI controller devices.
+ * @num_chipselect: chipselects are used to distinguish individual
+ * SPI slaves, and are numbered from zero to num_chipselects - 1.
+ * each slave has a chipselect signal, but it's common that not
+ * every chipselect is connected to a slave.
+ * @enable_dma: if true enables DMA driven transfers.
+ */
+struct pl022_ssp_controller {
+ u16 bus_id;
+ u8 num_chipselect;
+ u8 enable_dma:1;
+};
+
+/**
+ * struct ssp_config_chip - spi_board_info.controller_data for SPI
+ * slave devices, copied to spi_device.controller_data.
+ *
+ * @lbm: used for test purpose to internally connect RX and TX
+ * @iface: Interface type(Motorola, TI, Microwire, Universal)
+ * @hierarchy: sets whether interface is master or slave
+ * @slave_tx_disable: SSPTXD is disconnected (in slave mode only)
+ * @clk_freq: Tune freq parameters of SSP(when in master mode)
+ * @endian_rx: Endianess of Data in Rx FIFO
+ * @endian_tx: Endianess of Data in Tx FIFO
+ * @data_size: Width of data element(4 to 32 bits)
+ * @com_mode: communication mode: polling, Interrupt or DMA
+ * @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode)
+ * @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode)
+ * @clk_phase: Motorola SPI interface Clock phase
+ * @clk_pol: Motorola SPI interface Clock polarity
+ * @ctrl_len: Microwire interface: Control length
+ * @wait_state: Microwire interface: Wait state
+ * @duplex: Microwire interface: Full/Half duplex
+ * @cs_control: function pointer to board-specific function to
+ * assert/deassert I/O port to control HW generation of devices chip-select.
+ * @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph)
+ * @dma_config: DMA configuration for SSP controller and peripheral
+ */
+struct pl022_config_chip {
+ struct device *dev;
+ enum ssp_loopback lbm;
+ enum ssp_interface iface;
+ enum ssp_hierarchy hierarchy;
+ bool slave_tx_disable;
+ struct ssp_clock_params clk_freq;
+ enum ssp_rx_endian endian_rx;
+ enum ssp_tx_endian endian_tx;
+ enum ssp_data_size data_size;
+ enum ssp_mode com_mode;
+ enum ssp_rx_level_trig rx_lev_trig;
+ enum ssp_tx_level_trig tx_lev_trig;
+ enum ssp_spi_clk_phase clk_phase;
+ enum ssp_spi_clk_pol clk_pol;
+ enum ssp_microwire_ctrl_len ctrl_len;
+ enum ssp_microwire_wait_state wait_state;
+ enum ssp_duplex duplex;
+ void (*cs_control) (u32 control);
+};
+
+#endif /* _SSP_PL022_H */
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 64a982e..5a5a7fd 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -114,6 +114,9 @@
#define UART011_IFLS_TX4_8 (2 << 0)
#define UART011_IFLS_TX6_8 (3 << 0)
#define UART011_IFLS_TX7_8 (4 << 0)
+/* special values for ST vendor with deeper fifo */
+#define UART011_IFLS_RX_HALF (5 << 3)
+#define UART011_IFLS_TX_HALF (5 << 0)
#define UART011_OEIM (1 << 10) /* overrun error interrupt mask */
#define UART011_BEIM (1 << 9) /* break error interrupt mask */
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 1db9bbf..1d37f42 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -142,4 +142,17 @@ struct clk *clk_get_parent(struct clk *clk);
*/
struct clk *clk_get_sys(const char *dev_id, const char *con_id);
+/**
+ * clk_add_alias - add a new clock alias
+ * @alias: name for clock alias
+ * @alias_dev_name: device name
+ * @id: platform specific clock name
+ * @dev: device
+ *
+ * Allows using generic clock names for drivers by adding a new alias.
+ * Assumes clkdev, see clkdev.h for more info.
+ */
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+ struct device *dev);
+
#endif
diff --git a/include/video/pxa168fb.h b/include/video/pxa168fb.h
new file mode 100644
index 0000000..b5cc72f
--- /dev/null
+++ b/include/video/pxa168fb.h
@@ -0,0 +1,127 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/pxa168fb.h
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_PXA168FB_H
+#define __ASM_MACH_PXA168FB_H
+
+#include <linux/fb.h>
+#include <linux/interrupt.h>
+
+/* Dumb interface */
+#define PIN_MODE_DUMB_24 0
+#define PIN_MODE_DUMB_18_SPI 1
+#define PIN_MODE_DUMB_18_GPIO 2
+#define PIN_MODE_DUMB_16_SPI 3
+#define PIN_MODE_DUMB_16_GPIO 4
+#define PIN_MODE_DUMB_12_SPI_GPIO 5
+#define PIN_MODE_SMART_18_SPI 6
+#define PIN_MODE_SMART_16_SPI 7
+#define PIN_MODE_SMART_8_SPI_GPIO 8
+
+/* Dumb interface pin allocation */
+#define DUMB_MODE_RGB565 0
+#define DUMB_MODE_RGB565_UPPER 1
+#define DUMB_MODE_RGB666 2
+#define DUMB_MODE_RGB666_UPPER 3
+#define DUMB_MODE_RGB444 4
+#define DUMB_MODE_RGB444_UPPER 5
+#define DUMB_MODE_RGB888 6
+
+/* default fb buffer size WVGA-32bits */
+#define DEFAULT_FB_SIZE (800 * 480 * 4)
+
+/*
+ * Buffer pixel format
+ * bit0 is for rb swap.
+ * bit12 is for Y UorV swap
+ */
+#define PIX_FMT_RGB565 0
+#define PIX_FMT_BGR565 1
+#define PIX_FMT_RGB1555 2
+#define PIX_FMT_BGR1555 3
+#define PIX_FMT_RGB888PACK 4
+#define PIX_FMT_BGR888PACK 5
+#define PIX_FMT_RGB888UNPACK 6
+#define PIX_FMT_BGR888UNPACK 7
+#define PIX_FMT_RGBA888 8
+#define PIX_FMT_BGRA888 9
+#define PIX_FMT_YUV422PACK 10
+#define PIX_FMT_YVU422PACK 11
+#define PIX_FMT_YUV422PLANAR 12
+#define PIX_FMT_YVU422PLANAR 13
+#define PIX_FMT_YUV420PLANAR 14
+#define PIX_FMT_YVU420PLANAR 15
+#define PIX_FMT_PSEUDOCOLOR 20
+#define PIX_FMT_UYVY422PACK (0x1000|PIX_FMT_YUV422PACK)
+
+/*
+ * PXA LCD controller private state.
+ */
+struct pxa168fb_info {
+ struct device *dev;
+ struct clk *clk;
+ struct fb_info *info;
+
+ void __iomem *reg_base;
+ dma_addr_t fb_start_dma;
+ u32 pseudo_palette[16];
+
+ int pix_fmt;
+ unsigned is_blanked:1;
+ unsigned panel_rbswap:1;
+ unsigned active:1;
+};
+
+/*
+ * PXA fb machine information
+ */
+struct pxa168fb_mach_info {
+ char id[16];
+
+ int num_modes;
+ struct fb_videomode *modes;
+
+ /*
+ * Pix_fmt
+ */
+ unsigned pix_fmt;
+
+ /*
+ * I/O pin allocation.
+ */
+ unsigned io_pin_allocation_mode:4;
+
+ /*
+ * Dumb panel -- assignment of R/G/B component info to the 24
+ * available external data lanes.
+ */
+ unsigned dumb_mode:4;
+ unsigned panel_rgb_reverse_lanes:1;
+
+ /*
+ * Dumb panel -- GPIO output data.
+ */
+ unsigned gpio_output_mask:8;
+ unsigned gpio_output_data:8;
+
+ /*
+ * Dumb panel -- configurable output signal polarity.
+ */
+ unsigned invert_composite_blank:1;
+ unsigned invert_pix_val_ena:1;
+ unsigned invert_pixclock:1;
+ unsigned invert_vsync:1;
+ unsigned invert_hsync:1;
+ unsigned panel_rbswap:1;
+ unsigned active:1;
+ unsigned enable_lcd:1;
+};
+
+#endif /* __ASM_MACH_PXA168FB_H */
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index 5c48e36..dc78272 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -1089,7 +1089,7 @@ static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id)
goto out;
}
- aaci->base = ioremap(dev->res.start, SZ_4K);
+ aaci->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!aaci->base) {
ret = -ENOMEM;
goto out;
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index dcd163a..6375b4e 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -98,13 +98,14 @@ config SND_PXA2XX_SOC_EM_X270
CompuLab EM-x270, eXeda and CM-X300 machines.
config SND_PXA2XX_SOC_PALM27X
- bool "SoC Audio support for Palm T|X, T5 and LifeDrive"
- depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || MACH_PALMT5)
+ bool "SoC Audio support for Palm T|X, T5, E2 and LifeDrive"
+ depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || \
+ MACH_PALMT5 || MACH_PALMTE2)
select SND_PXA2XX_SOC_AC97
select SND_SOC_WM9712
help
Say Y if you want to add support for SoC audio on
- Palm T|X, T5 or LifeDrive handheld computer.
+ Palm T|X, T5, E2 or LifeDrive handheld computer.
config SND_SOC_ZYLONITE
tristate "SoC Audio support for Marvell Zylonite"
diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c
index 44fcc4e..e6102fd 100644
--- a/sound/soc/pxa/palm27x.c
+++ b/sound/soc/pxa/palm27x.c
@@ -205,7 +205,7 @@ static int palm27x_asoc_probe(struct platform_device *pdev)
int ret;
if (!(machine_is_palmtx() || machine_is_palmt5() ||
- machine_is_palmld()))
+ machine_is_palmld() || machine_is_palmte2()))
return -ENODEV;
if (pdev->dev.platform_data)
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
index 168a088..a587ec4 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/s3c24xx/s3c2412-i2s.c
@@ -20,6 +20,7 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/io.h>
diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c
index 3698f70..3f03d5d 100644
--- a/sound/soc/s3c24xx/s3c2443-ac97.c
+++ b/sound/soc/s3c24xx/s3c2443-ac97.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/wait.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/clk.h>
#include <sound/core.h>
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
index cc06696..556e35f 100644
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
@@ -21,6 +21,8 @@
#include <linux/clk.h>
#include <linux/jiffies.h>
#include <linux/io.h>
+#include <linux/gpio.h>
+
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c
index 169ddad..eecfa5e 100644
--- a/sound/soc/s3c24xx/s3c24xx-pcm.c
+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
@@ -218,24 +218,17 @@ static int s3c24xx_pcm_prepare(struct snd_pcm_substream *substream)
* sync to pclk, half-word transfers to the IIS-FIFO. */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
s3c2410_dma_devconfig(prtd->params->channel,
- S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC |
- S3C2410_DISRCC_APB, prtd->params->dma_addr);
-
- s3c2410_dma_config(prtd->params->channel,
- prtd->params->dma_size,
- S3C2410_DCON_SYNC_PCLK |
- S3C2410_DCON_HANDSHAKE);
+ S3C2410_DMASRC_MEM,
+ prtd->params->dma_addr);
} else {
- s3c2410_dma_config(prtd->params->channel,
- prtd->params->dma_size,
- S3C2410_DCON_HANDSHAKE |
- S3C2410_DCON_SYNC_PCLK);
-
s3c2410_dma_devconfig(prtd->params->channel,
- S3C2410_DMASRC_HW, 0x3,
- prtd->params->dma_addr);
+ S3C2410_DMASRC_HW,
+ prtd->params->dma_addr);
}
+ s3c2410_dma_config(prtd->params->channel,
+ prtd->params->dma_size);
+
/* flush the DMA channel */
s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
prtd->dma_loaded = 0;
OpenPOWER on IntegriCloud