summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/sgi-ioc4.txt45
-rw-r--r--drivers/ide/pci/sgiioc4.c30
-rw-r--r--drivers/serial/ioc4_serial.c311
-rw-r--r--drivers/sn/ioc4.c290
-rw-r--r--include/linux/ioc4.h156
-rw-r--r--include/linux/ioc4_common.h21
6 files changed, 617 insertions, 236 deletions
diff --git a/Documentation/sgi-ioc4.txt b/Documentation/sgi-ioc4.txt
new file mode 100644
index 0000000..876c96a
--- /dev/null
+++ b/Documentation/sgi-ioc4.txt
@@ -0,0 +1,45 @@
+The SGI IOC4 PCI device is a bit of a strange beast, so some notes on
+it are in order.
+
+First, even though the IOC4 performs multiple functions, such as an
+IDE controller, a serial controller, a PS/2 keyboard/mouse controller,
+and an external interrupt mechanism, it's not implemented as a
+multifunction device. The consequence of this from a software
+standpoint is that all these functions share a single IRQ, and
+they can't all register to own the same PCI device ID. To make
+matters a bit worse, some of the register blocks (and even registers
+themselves) present in IOC4 are mixed-purpose between these several
+functions, meaning that there's no clear "owning" device driver.
+
+The solution is to organize the IOC4 driver into several independent
+drivers, "ioc4", "sgiioc4", and "ioc4_serial". Note that there is no
+PS/2 controller driver as this functionality has never been wired up
+on a shipping IO card.
+
+ioc4
+====
+This is the core (or shim) driver for IOC4. It is responsible for
+initializing the basic functionality of the chip, and allocating
+the PCI resources that are shared between the IOC4 functions.
+
+This driver also provides registration functions that the other
+IOC4 drivers can call to make their presence known. Each driver
+needs to provide a probe and remove function, which are invoked
+by the core driver at appropriate times. The interface of these
+IOC4 function probe and remove operations isn't precisely the same
+as PCI device probe and remove operations, but is logically the
+same operation.
+
+sgiioc4
+=======
+This is the IDE driver for IOC4. Its name isn't very descriptive
+simply for historical reasons (it used to be the only IOC4 driver
+component). There's not much to say about it other than it hooks
+up to the ioc4 driver via the appropriate registration, probe, and
+remove functions.
+
+ioc4_serial
+===========
+This is the serial driver for IOC4. There's not much to say about it
+other than it hooks up to the ioc4 driver via the appropriate registration,
+probe, and remove functions.
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 4651a22..af526b6 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -34,7 +34,7 @@
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/blkdev.h>
-#include <linux/ioc4_common.h>
+#include <linux/ioc4.h>
#include <asm/io.h>
#include <linux/ide.h>
@@ -715,14 +715,34 @@ static ide_pci_device_t sgiioc4_chipsets[] __devinitdata = {
};
int
-ioc4_ide_attach_one(struct pci_dev *dev, const struct pci_device_id *id)
+ioc4_ide_attach_one(struct ioc4_driver_data *idd)
{
- return pci_init_sgiioc4(dev, &sgiioc4_chipsets[id->driver_data]);
+ return pci_init_sgiioc4(idd->idd_pdev,
+ &sgiioc4_chipsets[idd->idd_pci_id->driver_data]);
}
+static struct ioc4_submodule ioc4_ide_submodule = {
+ .is_name = "IOC4_ide",
+ .is_owner = THIS_MODULE,
+ .is_probe = ioc4_ide_attach_one,
+/* .is_remove = ioc4_ide_remove_one, */
+};
+
+static int __devinit
+ioc4_ide_init(void)
+{
+ return ioc4_register_submodule(&ioc4_ide_submodule);
+}
+
+static void __devexit
+ioc4_ide_exit(void)
+{
+ ioc4_unregister_submodule(&ioc4_ide_submodule);
+}
+
+module_init(ioc4_ide_init);
+module_exit(ioc4_ide_exit);
MODULE_AUTHOR("Aniket Malatpure - Silicon Graphics Inc. (SGI)");
MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(ioc4_ide_attach_one);
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index ba4e13a..da5f10e 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -20,7 +20,7 @@
#include <linux/serial_reg.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/ioc4_common.h>
+#include <linux/ioc4.h>
#include <linux/serial_core.h>
/*
@@ -130,12 +130,19 @@
IOC4_SIO_IR_S3_TX_EXPLICIT)
/* Bitmasks for IOC4_OTHER_IR, IOC4_OTHER_IEC, and IOC4_OTHER_IES */
-#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */
-#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */
-#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */
-#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */
-#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */
-#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */
+#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */
+#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */
+#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */
+#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */
+#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */
+#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */
+#define IOC4_OTHER_IR_KBD_INT 0x00000040 /* Keyboard/mouse */
+#define IOC4_OTHER_IR_RESERVED 0x007fff80 /* Reserved */
+#define IOC4_OTHER_IR_RT_INT 0x00800000 /* INT_OUT section output */
+#define IOC4_OTHER_IR_GEN_INT 0xff000000 /* Generic pins */
+
+#define IOC4_OTHER_IR_SER_MEMERR (IOC4_OTHER_IR_S0_MEMERR | IOC4_OTHER_IR_S1_MEMERR | \
+ IOC4_OTHER_IR_S2_MEMERR | IOC4_OTHER_IR_S3_MEMERR)
/* Bitmasks for IOC4_SIO_CR */
#define IOC4_SIO_CR_CMD_PULSE_SHIFT 0 /* byte bus strobe shift */
@@ -274,67 +281,22 @@ struct ioc4_uartregs {
#define i4u_dlm u2.dlm
#define i4u_fcr u3.fcr
-/* PCI memory space register map addressed using pci_bar0 */
-struct ioc4_memregs {
- struct ioc4_mem {
- /* Miscellaneous IOC4 registers */
- uint32_t pci_err_addr_l;
- uint32_t pci_err_addr_h;
- uint32_t sio_ir;
- uint32_t other_ir;
-
- /* These registers are read-only for general kernel code. */
- uint32_t sio_ies_ro;
- uint32_t other_ies_ro;
- uint32_t sio_iec_ro;
- uint32_t other_iec_ro;
- uint32_t sio_cr;
- uint32_t misc_fill1;
- uint32_t int_out;
- uint32_t misc_fill2;
- uint32_t gpcr_s;
- uint32_t gpcr_c;
- uint32_t gpdr;
- uint32_t misc_fill3;
- uint32_t gppr_0;
- uint32_t gppr_1;
- uint32_t gppr_2;
- uint32_t gppr_3;
- uint32_t gppr_4;
- uint32_t gppr_5;
- uint32_t gppr_6;
- uint32_t gppr_7;
- } ioc4_mem;
-
- char misc_fill4[0x100 - 0x5C - 4];
-
- /* ATA/ATAP registers */
- uint32_t ata_notused[9];
- char ata_fill1[0x140 - 0x120 - 4];
- uint32_t ata_notused1[8];
- char ata_fill2[0x200 - 0x15C - 4];
-
- /* Keyboard and mouse registers */
- uint32_t km_notused[5];;
- char km_fill1[0x300 - 0x210 - 4];
-
- /* Serial port registers used for DMA serial I/O */
- struct ioc4_serial {
- uint32_t sbbr01_l;
- uint32_t sbbr01_h;
- uint32_t sbbr23_l;
- uint32_t sbbr23_h;
-
- struct ioc4_serialregs port_0;
- struct ioc4_serialregs port_1;
- struct ioc4_serialregs port_2;
- struct ioc4_serialregs port_3;
- struct ioc4_uartregs uart_0;
- struct ioc4_uartregs uart_1;
- struct ioc4_uartregs uart_2;
- struct ioc4_uartregs uart_3;
- } ioc4_serial;
-};
+/* Serial port registers used for DMA serial I/O */
+struct ioc4_serial {
+ uint32_t sbbr01_l;
+ uint32_t sbbr01_h;
+ uint32_t sbbr23_l;
+ uint32_t sbbr23_h;
+
+ struct ioc4_serialregs port_0;
+ struct ioc4_serialregs port_1;
+ struct ioc4_serialregs port_2;
+ struct ioc4_serialregs port_3;
+ struct ioc4_uartregs uart_0;
+ struct ioc4_uartregs uart_1;
+ struct ioc4_uartregs uart_2;
+ struct ioc4_uartregs uart_3;
+} ioc4_serial;
/* UART clock speed */
#define IOC4_SER_XIN_CLK IOC4_SER_XIN_CLK_66
@@ -412,8 +374,8 @@ enum sio_proto {
| UART_LCR_WLEN7 | UART_LCR_WLEN8)
#define LCR_MASK_STOP_BITS (UART_LCR_STOP)
-#define PENDING(_p) (readl(&(_p)->ip_mem->sio_ir) & _p->ip_ienb)
-#define READ_SIO_IR(_p) readl(&(_p)->ip_mem->sio_ir)
+#define PENDING(_p) (readl(&(_p)->ip_mem->sio_ir.raw) & _p->ip_ienb)
+#define READ_SIO_IR(_p) readl(&(_p)->ip_mem->sio_ir.raw)
/* Default to 4k buffers */
#ifdef IOC4_1K_BUFFERS
@@ -447,7 +409,7 @@ struct ioc4_control {
*/
#define MAX_IOC4_INTR_ENTS (8 * sizeof(uint32_t))
struct ioc4_soft {
- struct ioc4_mem __iomem *is_ioc4_mem_addr;
+ struct ioc4_misc_regs __iomem *is_ioc4_misc_addr;
struct ioc4_serial __iomem *is_ioc4_serial_addr;
/* Each interrupt type has an entry in the array */
@@ -486,7 +448,7 @@ struct ioc4_port {
struct ioc4_soft *ip_ioc4_soft;
/* pci mem addresses */
- struct ioc4_mem __iomem *ip_mem;
+ struct ioc4_misc_regs __iomem *ip_mem;
struct ioc4_serial __iomem *ip_serial;
struct ioc4_serialregs __iomem *ip_serial_regs;
struct ioc4_uartregs __iomem *ip_uart_regs;
@@ -553,7 +515,7 @@ struct hooks {
uint32_t intr_dma_error;
uint32_t intr_clear;
uint32_t intr_all;
- char rs422_select_pin;
+ int rs422_select_pin;
};
static struct hooks hooks_array[IOC4_NUM_SERIAL_PORTS] = {
@@ -669,7 +631,7 @@ static void handle_intr(void *arg, uint32_t sio_ir);
static inline void
write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type)
{
- struct ioc4_mem __iomem *mem = ioc4_soft->is_ioc4_mem_addr;
+ struct ioc4_misc_regs __iomem *mem = ioc4_soft->is_ioc4_misc_addr;
unsigned long flags;
spin_lock_irqsave(&ioc4_soft->is_ir_lock, flags);
@@ -678,11 +640,11 @@ write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type)
case IOC4_SIO_INTR_TYPE:
switch (which) {
case IOC4_W_IES:
- writel(val, &mem->sio_ies_ro);
+ writel(val, &mem->sio_ies.raw);
break;
case IOC4_W_IEC:
- writel(val, &mem->sio_iec_ro);
+ writel(val, &mem->sio_iec.raw);
break;
}
break;
@@ -690,11 +652,11 @@ write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type)
case IOC4_OTHER_INTR_TYPE:
switch (which) {
case IOC4_W_IES:
- writel(val, &mem->other_ies_ro);
+ writel(val, &mem->other_ies.raw);
break;
case IOC4_W_IEC:
- writel(val, &mem->other_iec_ro);
+ writel(val, &mem->other_iec.raw);
break;
}
break;
@@ -747,7 +709,8 @@ static int set_baud(struct ioc4_port *port, int baud)
*/
static struct ioc4_port *get_ioc4_port(struct uart_port *the_port)
{
- struct ioc4_control *control = dev_get_drvdata(the_port->dev);
+ struct ioc4_driver_data *idd = dev_get_drvdata(the_port->dev);
+ struct ioc4_control *control = idd->idd_serial_data;
int ii;
if (control) {
@@ -782,7 +745,7 @@ static struct ioc4_port *get_ioc4_port(struct uart_port *the_port)
static inline uint32_t
pending_intrs(struct ioc4_soft *soft, int type)
{
- struct ioc4_mem __iomem *mem = soft->is_ioc4_mem_addr;
+ struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr;
unsigned long flag;
uint32_t intrs = 0;
@@ -793,11 +756,11 @@ pending_intrs(struct ioc4_soft *soft, int type)
switch (type) {
case IOC4_SIO_INTR_TYPE:
- intrs = readl(&mem->sio_ir) & readl(&mem->sio_ies_ro);
+ intrs = readl(&mem->sio_ir.raw) & readl(&mem->sio_ies.raw);
break;
case IOC4_OTHER_INTR_TYPE:
- intrs = readl(&mem->other_ir) & readl(&mem->other_ies_ro);
+ intrs = readl(&mem->other_ir.raw) & readl(&mem->other_ies.raw);
/* Don't process any ATA interrupte */
intrs &= ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR);
@@ -826,7 +789,7 @@ static int inline port_init(struct ioc4_port *port)
/* Wait until any pending bus activity for this port has ceased */
do
- sio_cr = readl(&port->ip_mem->sio_cr);
+ sio_cr = readl(&port->ip_mem->sio_cr.raw);
while (!(sio_cr & IOC4_SIO_CR_SIO_DIAG_IDLE));
/* Finish reset sequence */
@@ -899,7 +862,7 @@ static int inline port_init(struct ioc4_port *port)
write_ireg(port->ip_ioc4_soft, hooks->intr_clear,
IOC4_W_IEC, IOC4_SIO_INTR_TYPE);
port->ip_ienb &= ~hooks->intr_clear;
- writel(hooks->intr_clear, &port->ip_mem->sio_ir);
+ writel(hooks->intr_clear, &port->ip_mem->sio_ir.raw);
return 0;
}
@@ -918,23 +881,23 @@ static void handle_dma_error_intr(void *arg, uint32_t other_ir)
spin_lock_irqsave(&port->ip_lock, flags);
/* ACK the interrupt */
- writel(hooks->intr_dma_error, &port->ip_mem->other_ir);
+ writel(hooks->intr_dma_error, &port->ip_mem->other_ir.raw);
- if (readl(&port->ip_mem->pci_err_addr_l) & IOC4_PCI_ERR_ADDR_VLD) {
+ if (readl(&port->ip_mem->pci_err_addr_l.raw) & IOC4_PCI_ERR_ADDR_VLD) {
printk(KERN_ERR
"PCI error address is 0x%lx, "
"master is serial port %c %s\n",
(((uint64_t)readl(&port->ip_mem->pci_err_addr_h)
<< 32)
- | readl(&port->ip_mem->pci_err_addr_l))
+ | readl(&port->ip_mem->pci_err_addr_l.raw))
& IOC4_PCI_ERR_ADDR_ADDR_MSK, '1' +
- ((char)(readl(&port->ip_mem-> pci_err_addr_l) &
+ ((char)(readl(&port->ip_mem->pci_err_addr_l.raw) &
IOC4_PCI_ERR_ADDR_MST_NUM_MSK) >> 1),
- (readl(&port->ip_mem->pci_err_addr_l)
+ (readl(&port->ip_mem->pci_err_addr_l.raw)
& IOC4_PCI_ERR_ADDR_MST_TYP_MSK)
? "RX" : "TX");
- if (readl(&port->ip_mem->pci_err_addr_l)
+ if (readl(&port->ip_mem->pci_err_addr_l.raw)
& IOC4_PCI_ERR_ADDR_MUL_ERR) {
printk(KERN_ERR
"Multiple errors occurred\n");
@@ -1018,26 +981,26 @@ static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs)
"other_ies = 0x%x\n",
(intr_type == IOC4_SIO_INTR_TYPE) ? "sio" :
"other", this_ir,
- readl(&soft->is_ioc4_mem_addr->sio_ir),
- readl(&soft->is_ioc4_mem_addr->sio_ies_ro),
- readl(&soft->is_ioc4_mem_addr->other_ir),
- readl(&soft->is_ioc4_mem_addr->other_ies_ro));
+ readl(&soft->is_ioc4_misc_addr->sio_ir.raw),
+ readl(&soft->is_ioc4_misc_addr->sio_ies.raw),
+ readl(&soft->is_ioc4_misc_addr->other_ir.raw),
+ readl(&soft->is_ioc4_misc_addr->other_ies.raw));
}
}
#ifdef DEBUG_INTERRUPTS
{
- struct ioc4_mem __iomem *mem = soft->is_ioc4_mem_addr;
+ struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr;
spinlock_t *lp = &soft->is_ir_lock;
unsigned long flag;
spin_lock_irqsave(&soft->is_ir_lock, flag);
- printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies_ro 0x%x "
- "other_ir 0x%x other_ies_ro 0x%x mask 0x%x\n",
+ printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies 0x%x "
+ "other_ir 0x%x other_ies 0x%x mask 0x%x\n",
__FUNCTION__, __LINE__,
- (void *)mem, readl(&mem->sio_ir),
- readl(&mem->sio_ies_ro),
- readl(&mem->other_ir),
- readl(&mem->other_ies_ro),
+ (void *)mem, readl(&mem->sio_ir.raw),
+ readl(&mem->sio_ies.raw),
+ readl(&mem->other_ir.raw),
+ readl(&mem->other_ies.raw),
IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR);
spin_unlock_irqrestore(&soft->is_ir_lock, flag);
}
@@ -1056,7 +1019,7 @@ static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs)
*/
static int inline ioc4_attach_local(struct pci_dev *pdev,
struct ioc4_control *control,
- struct ioc4_soft *soft, void __iomem *ioc4_mem,
+ struct ioc4_soft *soft, void __iomem *ioc4_misc,
void __iomem *ioc4_serial)
{
struct ioc4_port *port;
@@ -1076,7 +1039,7 @@ static int inline ioc4_attach_local(struct pci_dev *pdev,
ioc4_revid, ioc4_revid_min);
return -EPERM;
}
- BUG_ON(ioc4_mem == NULL);
+ BUG_ON(ioc4_misc == NULL);
BUG_ON(ioc4_serial == NULL);
/* Create port structures for each port */
@@ -1103,7 +1066,7 @@ static int inline ioc4_attach_local(struct pci_dev *pdev,
port->ip_pci_bus_speed = IOC4_SER_XIN_CLK;
port->ip_baud = 9600;
port->ip_control = control;
- port->ip_mem = ioc4_mem;
+ port->ip_mem = ioc4_misc;
port->ip_serial = ioc4_serial;
/* point to the right hook */
@@ -1604,14 +1567,12 @@ static int ioc4_set_proto(struct ioc4_port *port, enum sio_proto proto)
switch (proto) {
case PROTO_RS232:
/* Clear the appropriate GIO pin */
- writel(0, (&port->ip_mem->gppr_0 +
- hooks->rs422_select_pin));
+ writel(0, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw));
break;
case PROTO_RS422:
/* Set the appropriate GIO pin */
- writel(1, (&port->ip_mem->gppr_0 +
- hooks->rs422_select_pin));
+ writel(1, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw));
break;
default:
@@ -1885,7 +1846,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
if (sio_ir & hooks->intr_delta_dcd) {
/* ACK the interrupt */
writel(hooks->intr_delta_dcd,
- &port->ip_mem->sio_ir);
+ &port->ip_mem->sio_ir.raw);
shadow = readl(&port->ip_serial_regs->shadow);
@@ -1907,7 +1868,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
if (sio_ir & hooks->intr_delta_cts) {
/* ACK the interrupt */
writel(hooks->intr_delta_cts,
- &port->ip_mem->sio_ir);
+ &port->ip_mem->sio_ir.raw);
shadow = readl(&port->ip_serial_regs->shadow);
@@ -1928,7 +1889,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
if (sio_ir & hooks->intr_rx_timer) {
/* ACK the interrupt */
writel(hooks->intr_rx_timer,
- &port->ip_mem->sio_ir);
+ &port->ip_mem->sio_ir.raw);
if ((port->ip_notify & N_DATA_READY)
&& (port->ip_port)) {
@@ -1974,7 +1935,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
/* ACK the interrupt */
writel(hooks->intr_tx_explicit,
- &port->ip_mem->sio_ir);
+ &port->ip_mem->sio_ir.raw);
if (port->ip_notify & N_OUTPUT_LOWAT)
ioc4_cb_output_lowat(port);
@@ -2634,7 +2595,8 @@ ioc4_serial_core_attach(struct pci_dev *pdev)
{
struct ioc4_port *port;
struct uart_port *the_port;
- struct ioc4_control *control = pci_get_drvdata(pdev);
+ struct ioc4_driver_data *idd = pci_get_drvdata(pdev);
+ struct ioc4_control *control = idd->idd_serial_data;
int ii;
DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n",
@@ -2680,55 +2642,29 @@ ioc4_serial_core_attach(struct pci_dev *pdev)
/**
* ioc4_serial_attach_one - register attach function
- * called per card found from ioc4_serial_detect as part
- * of module_init().
- * @pdev: handle for this card
- * @pci_id: pci id for this card
+ * called per card found from IOC4 master module.
+ * @idd: Master module data for this IOC4
*/
int
-ioc4_serial_attach_one(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+ioc4_serial_attach_one(struct ioc4_driver_data *idd)
{
- struct ioc4_mem __iomem *mem;
- unsigned long tmp_addr, tmp_addr1;
+ unsigned long tmp_addr1;
struct ioc4_serial __iomem *serial;
struct ioc4_soft *soft;
struct ioc4_control *control;
- int tmp, ret = 0;
+ int ret = 0;
- DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, pdev, pci_id));
-
- /* Map in the ioc4 memory */
- tmp_addr = pci_resource_start(pdev, 0);
- if (!tmp_addr) {
- printk(KERN_WARNING
- "ioc4 (%p) : unable to get PIO mapping for "
- "MEM space\n", (void *)pdev);
- return -ENODEV;
- }
- if (!request_region(tmp_addr, sizeof(struct ioc4_mem), "sioc4_mem")) {
- printk(KERN_ALERT
- "ioc4 (%p): unable to get request region for "
- "MEM space\n", (void *)pdev);
- return -ENODEV;
- }
- mem = ioremap(tmp_addr, sizeof(struct ioc4_mem));
- if (!mem) {
- printk(KERN_WARNING
- "ioc4 (%p) : unable to remap ioc4 memory\n",
- (void *)pdev);
- ret = -ENODEV;
- goto out1;
- }
+ DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev, idd->idd_pci_id));
/* request serial registers */
- tmp_addr1 = pci_resource_start(pdev, 0) + IOC4_SERIAL_OFFSET;
+ tmp_addr1 = idd->idd_bar0 + IOC4_SERIAL_OFFSET;
if (!request_region(tmp_addr1, sizeof(struct ioc4_serial),
"sioc4_uart")) {
printk(KERN_WARNING
"ioc4 (%p): unable to get request region for "
- "uart space\n", (void *)pdev);
+ "uart space\n", (void *)idd->idd_pdev);
ret = -ENODEV;
goto out1;
}
@@ -2736,12 +2672,12 @@ ioc4_serial_attach_one(struct pci_dev *pdev, const struct pci_device_id *pci_id)
if (!serial) {
printk(KERN_WARNING
"ioc4 (%p) : unable to remap ioc4 serial register\n",
- (void *)pdev);
+ (void *)idd->idd_pdev);
ret = -ENODEV;
goto out2;
}
DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n",
- __FUNCTION__, (void *)mem, (void *)serial));
+ __FUNCTION__, (void *)idd->idd_misc_regs, (void *)serial));
/* Get memory for the new card */
control = kmalloc(sizeof(struct ioc4_control) * IOC4_NUM_SERIAL_PORTS,
@@ -2754,59 +2690,57 @@ ioc4_serial_attach_one(struct pci_dev *pdev, const struct pci_device_id *pci_id)
goto out2;
}
memset(control, 0, sizeof(struct ioc4_control));
- pci_set_drvdata(pdev, control);
+ idd->idd_serial_data = control;
/* Allocate the soft structure */
soft = kmalloc(sizeof(struct ioc4_soft), GFP_KERNEL);
if (!soft) {
printk(KERN_WARNING
"ioc4 (%p): unable to get memory for the soft struct\n",
- (void *)pdev);
+ (void *)idd->idd_pdev);
ret = -ENOMEM;
goto out3;
}
memset(soft, 0, sizeof(struct ioc4_soft));
spin_lock_init(&soft->is_ir_lock);
- soft->is_ioc4_mem_addr = mem;
+ soft->is_ioc4_misc_addr = idd->idd_misc_regs;
soft->is_ioc4_serial_addr = serial;
/* Init the IOC4 */
- pci_read_config_dword(pdev, PCI_COMMAND, &tmp);
- pci_write_config_dword(pdev, PCI_COMMAND,
- tmp | PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
-
- writel(0xf << IOC4_SIO_CR_CMD_PULSE_SHIFT, &mem->sio_cr);
+ writel(0xf << IOC4_SIO_CR_CMD_PULSE_SHIFT,
+ &idd->idd_misc_regs->sio_cr.raw);
/* Enable serial port mode select generic PIO pins as outputs */
writel(IOC4_GPCR_UART0_MODESEL | IOC4_GPCR_UART1_MODESEL
| IOC4_GPCR_UART2_MODESEL | IOC4_GPCR_UART3_MODESEL,
- &mem->gpcr_s);
+ &idd->idd_misc_regs->gpcr_s.raw);
- /* Clear and disable all interrupts */
+ /* Clear and disable all serial interrupts */
write_ireg(soft, ~0, IOC4_W_IEC, IOC4_SIO_INTR_TYPE);
- writel(~0, &mem->sio_ir);
- write_ireg(soft, ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR),
- IOC4_W_IEC, IOC4_OTHER_INTR_TYPE);
- writel(~(IOC4_OTHER_IR_ATA_MEMERR | IOC4_OTHER_IR_ATA_MEMERR),
- &mem->other_ir);
+ writel(~0, &idd->idd_misc_regs->sio_ir.raw);
+ write_ireg(soft, IOC4_OTHER_IR_SER_MEMERR, IOC4_W_IEC,
+ IOC4_OTHER_INTR_TYPE);
+ writel(IOC4_OTHER_IR_SER_MEMERR, &idd->idd_misc_regs->other_ir.raw);
control->ic_soft = soft;
- if (!request_irq(pdev->irq, ioc4_intr, SA_SHIRQ,
+
+ /* Hook up interrupt handler */
+ if (!request_irq(idd->idd_pdev->irq, ioc4_intr, SA_SHIRQ,
"sgi-ioc4serial", (void *)soft)) {
- control->ic_irq = pdev->irq;
+ control->ic_irq = idd->idd_pdev->irq;
} else {
printk(KERN_WARNING
"%s : request_irq fails for IRQ 0x%x\n ",
- __FUNCTION__, pdev->irq);
+ __FUNCTION__, idd->idd_pdev->irq);
}
- if ((ret = ioc4_attach_local(pdev, control, soft,
- soft->is_ioc4_mem_addr,
+ if ((ret = ioc4_attach_local(idd->idd_pdev, control, soft,
+ soft->is_ioc4_misc_addr,
soft->is_ioc4_serial_addr)))
goto out4;
/* register port with the serial core */
- if ((ret = ioc4_serial_core_attach(pdev)))
+ if ((ret = ioc4_serial_core_attach(idd->idd_pdev)))
goto out4;
return ret;
@@ -2819,7 +2753,6 @@ out3:
out2:
release_region(tmp_addr1, sizeof(struct ioc4_serial));
out1:
- release_region(tmp_addr, sizeof(struct ioc4_mem));
return ret;
}
@@ -2828,11 +2761,10 @@ out1:
/**
* ioc4_serial_remove_one - detach function
*
- * @pdev: handle for this card
+ * @idd: IOC4 master module data for this IOC4
*/
-#if 0
-void ioc4_serial_remove_one(struct pci_dev *pdev)
+int ioc4_serial_remove_one(struct ioc4_driver_data *idd)
{
int ii;
struct ioc4_control *control;
@@ -2840,7 +2772,7 @@ void ioc4_serial_remove_one(struct pci_dev *pdev)
struct ioc4_port *port;
struct ioc4_soft *soft;
- control = pci_get_drvdata(pdev);
+ control = idd->idd_serial_data;
for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) {
the_port = &control->ic_port[ii].icp_uart_port;
@@ -2867,10 +2799,17 @@ void ioc4_serial_remove_one(struct pci_dev *pdev)
kfree(soft);
}
kfree(control);
- pci_set_drvdata(pdev, NULL);
- uart_unregister_driver(&ioc4_uart);
+ idd->idd_serial_data = NULL;
+
+ return 0;
}
-#endif
+
+static struct ioc4_submodule ioc4_serial_submodule = {
+ .is_name = "IOC4_serial",
+ .is_owner = THIS_MODULE,
+ .is_probe = ioc4_serial_attach_one,
+ .is_remove = ioc4_serial_remove_one,
+};
/**
* ioc4_serial_init - module init
@@ -2886,12 +2825,20 @@ int ioc4_serial_init(void)
__FUNCTION__);
return ret;
}
- return 0;
+
+ /* register with IOC4 main module */
+ return ioc4_register_submodule(&ioc4_serial_submodule);
}
+static void __devexit ioc4_serial_exit(void)
+{
+ ioc4_unregister_submodule(&ioc4_serial_submodule);
+ uart_unregister_driver(&ioc4_uart);
+}
+
+module_init(ioc4_serial_init);
+module_exit(ioc4_serial_exit);
+
MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) <pfg@sgi.com>");
MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC4 Base-IO Card");
MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(ioc4_serial_init);
-EXPORT_SYMBOL(ioc4_serial_attach_one);
diff --git a/drivers/sn/ioc4.c b/drivers/sn/ioc4.c
index d9e4ee2..70862d7 100644
--- a/drivers/sn/ioc4.c
+++ b/drivers/sn/ioc4.c
@@ -6,60 +6,294 @@
* Copyright (C) 2005 Silicon Graphics, Inc. All Rights Reserved.
*/
-/*
- * This file contains a shim driver for the IOC4 IDE and serial drivers.
+/* This file contains the master driver module for use by SGI IOC4 subdrivers.
+ *
+ * It allocates any resources shared between multiple subdevices, and
+ * provides accessor functions (where needed) and the like for those
+ * resources. It also provides a mechanism for the subdevice modules
+ * to support loading and unloading.
+ *
+ * Non-shared resources (e.g. external interrupt A_INT_OUT register page
+ * alias, serial port and UART registers) are handled by the subdevice
+ * modules themselves.
+ *
+ * This is all necessary because IOC4 is not implemented as a multi-function
+ * PCI device, but an amalgamation of disparate registers for several
+ * types of device (ATA, serial, external interrupts). The normal
+ * resource management in the kernel doesn't have quite the right interfaces
+ * to handle this situation (e.g. multiple modules can't claim the same
+ * PCI ID), thus this IOC4 master module.
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/ioc4_common.h>
-#include <linux/ide.h>
+#include <linux/ioc4.h>
+#include <linux/rwsem.h>
+/************************
+ * Submodule management *
+ ************************/
-static int __devinit
-ioc4_probe_one(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+static LIST_HEAD(ioc4_devices);
+static DECLARE_RWSEM(ioc4_devices_rwsem);
+
+static LIST_HEAD(ioc4_submodules);
+static DECLARE_RWSEM(ioc4_submodules_rwsem);
+
+/* Register an IOC4 submodule */
+int
+ioc4_register_submodule(struct ioc4_submodule *is)
+{
+ struct ioc4_driver_data *idd;
+
+ down_write(&ioc4_submodules_rwsem);
+ list_add(&is->is_list, &ioc4_submodules);
+ up_write(&ioc4_submodules_rwsem);
+
+ /* Initialize submodule for each IOC4 */
+ if (!is->is_probe)
+ return 0;
+
+ down_read(&ioc4_devices_rwsem);
+ list_for_each_entry(idd, &ioc4_devices, idd_list) {
+ if (is->is_probe(idd)) {
+ printk(KERN_WARNING
+ "%s: IOC4 submodule %s probe failed "
+ "for pci_dev %s",
+ __FUNCTION__, module_name(is->is_owner),
+ pci_name(idd->idd_pdev));
+ }
+ }
+ up_read(&ioc4_devices_rwsem);
+
+ return 0;
+}
+
+/* Unregister an IOC4 submodule */
+void
+ioc4_unregister_submodule(struct ioc4_submodule *is)
{
+ struct ioc4_driver_data *idd;
+
+ down_write(&ioc4_submodules_rwsem);
+ list_del(&is->is_list);
+ up_write(&ioc4_submodules_rwsem);
+
+ /* Remove submodule for each IOC4 */
+ if (!is->is_remove)
+ return;
+
+ down_read(&ioc4_devices_rwsem);
+ list_for_each_entry(idd, &ioc4_devices, idd_list) {
+ if (is->is_remove(idd)) {
+ printk(KERN_WARNING
+ "%s: IOC4 submodule %s remove failed "
+ "for pci_dev %s.\n",
+ __FUNCTION__, module_name(is->is_owner),
+ pci_name(idd->idd_pdev));
+ }
+ }
+ up_read(&ioc4_devices_rwsem);
+}
+
+/*********************
+ * Device management *
+ *********************/
+
+/* Adds a new instance of an IOC4 card */
+static int
+ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+{
+ struct ioc4_driver_data *idd;
+ struct ioc4_submodule *is;
+ uint32_t pcmd;
int ret;
+ /* Enable IOC4 and take ownership of it */
if ((ret = pci_enable_device(pdev))) {
printk(KERN_WARNING
- "%s: Failed to enable device with "
- "pci_dev 0x%p... returning\n",
- __FUNCTION__, (void *)pdev);
- return ret;
+ "%s: Failed to enable IOC4 device for pci_dev %s.\n",
+ __FUNCTION__, pci_name(pdev));
+ goto out;
}
pci_set_master(pdev);
- /* attach each sub-device */
- ret = ioc4_ide_attach_one(pdev, pci_id);
- if (ret)
- return ret;
- return ioc4_serial_attach_one(pdev, pci_id);
+ /* Set up per-IOC4 data */
+ idd = kmalloc(sizeof(struct ioc4_driver_data), GFP_KERNEL);
+ if (!idd) {
+ printk(KERN_WARNING
+ "%s: Failed to allocate IOC4 data for pci_dev %s.\n",
+ __FUNCTION__, pci_name(pdev));
+ ret = -ENODEV;
+ goto out_idd;
+ }
+ idd->idd_pdev = pdev;
+ idd->idd_pci_id = pci_id;
+
+ /* Map IOC4 misc registers. These are shared between subdevices
+ * so the main IOC4 module manages them.
+ */
+ idd->idd_bar0 = pci_resource_start(idd->idd_pdev, 0);
+ if (!idd->idd_bar0) {
+ printk(KERN_WARNING
+ "%s: Unable to find IOC4 misc resource "
+ "for pci_dev %s.\n",
+ __FUNCTION__, pci_name(idd->idd_pdev));
+ ret = -ENODEV;
+ goto out_pci;
+ }
+ if (!request_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs),
+ "ioc4_misc")) {
+ printk(KERN_WARNING
+ "%s: Unable to request IOC4 misc region "
+ "for pci_dev %s.\n",
+ __FUNCTION__, pci_name(idd->idd_pdev));
+ ret = -ENODEV;
+ goto out_pci;
+ }
+ idd->idd_misc_regs = ioremap(idd->idd_bar0,
+ sizeof(struct ioc4_misc_regs));
+ if (!idd->idd_misc_regs) {
+ printk(KERN_WARNING
+ "%s: Unable to remap IOC4 misc region "
+ "for pci_dev %s.\n",
+ __FUNCTION__, pci_name(idd->idd_pdev));
+ ret = -ENODEV;
+ goto out_misc_region;
+ }
+
+ /* Failsafe portion of per-IOC4 initialization */
+
+ /* Initialize IOC4 */
+ pci_read_config_dword(idd->idd_pdev, PCI_COMMAND, &pcmd);
+ pci_write_config_dword(idd->idd_pdev, PCI_COMMAND,
+ pcmd | PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+
+ /* Disable/clear all interrupts. Need to do this here lest
+ * one submodule request the shared IOC4 IRQ, but interrupt
+ * is generated by a different subdevice.
+ */
+ /* Disable */
+ writel(~0, &idd->idd_misc_regs->other_iec.raw);
+ writel(~0, &idd->idd_misc_regs->sio_iec);
+ /* Clear (i.e. acknowledge) */
+ writel(~0, &idd->idd_misc_regs->other_ir.raw);
+ writel(~0, &idd->idd_misc_regs->sio_ir);
+
+ /* Track PCI-device specific data */
+ idd->idd_serial_data = NULL;
+ pci_set_drvdata(idd->idd_pdev, idd);
+ down_write(&ioc4_devices_rwsem);
+ list_add(&idd->idd_list, &ioc4_devices);
+ up_write(&ioc4_devices_rwsem);
+
+ /* Add this IOC4 to all submodules */
+ down_read(&ioc4_submodules_rwsem);
+ list_for_each_entry(is, &ioc4_submodules, is_list) {
+ if (is->is_probe && is->is_probe(idd)) {
+ printk(KERN_WARNING
+ "%s: IOC4 submodule 0x%s probe failed "
+ "for pci_dev %s.\n",
+ __FUNCTION__, module_name(is->is_owner),
+ pci_name(idd->idd_pdev));
+ }
+ }
+ up_read(&ioc4_submodules_rwsem);
+
+ return 0;
+
+out_misc_region:
+ release_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs));
+out_pci:
+ kfree(idd);
+out_idd:
+ pci_disable_device(pdev);
+out:
+ return ret;
}
-/* pci device struct */
-static struct pci_device_id ioc4_s_id_table[] = {
+/* Removes a particular instance of an IOC4 card. */
+static void
+ioc4_remove(struct pci_dev *pdev)
+{
+ struct ioc4_submodule *is;
+ struct ioc4_driver_data *idd;
+
+ idd = pci_get_drvdata(pdev);
+
+ /* Remove this IOC4 from all submodules */
+ down_read(&ioc4_submodules_rwsem);
+ list_for_each_entry(is, &ioc4_submodules, is_list) {
+ if (is->is_remove && is->is_remove(idd)) {
+ printk(KERN_WARNING
+ "%s: IOC4 submodule 0x%s remove failed "
+ "for pci_dev %s.\n",
+ __FUNCTION__, module_name(is->is_owner),
+ pci_name(idd->idd_pdev));
+ }
+ }
+ up_read(&ioc4_submodules_rwsem);
+
+ /* Release resources */
+ iounmap(idd->idd_misc_regs);
+ if (!idd->idd_bar0) {
+ printk(KERN_WARNING
+ "%s: Unable to get IOC4 misc mapping for pci_dev %s. "
+ "Device removal may be incomplete.\n",
+ __FUNCTION__, pci_name(idd->idd_pdev));
+ }
+ release_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs));
+
+ /* Disable IOC4 and relinquish */
+ pci_disable_device(pdev);
+
+ /* Remove and free driver data */
+ down_write(&ioc4_devices_rwsem);
+ list_del(&idd->idd_list);
+ up_write(&ioc4_devices_rwsem);
+ kfree(idd);
+}
+
+static struct pci_device_id ioc4_id_table[] = {
{PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC4, PCI_ANY_ID,
PCI_ANY_ID, 0x0b4000, 0xFFFFFF},
{0}
};
-MODULE_DEVICE_TABLE(pci, ioc4_s_id_table);
-static struct pci_driver __devinitdata ioc4_s_driver = {
- .name = "IOC4",
- .id_table = ioc4_s_id_table,
- .probe = ioc4_probe_one,
+static struct pci_driver __devinitdata ioc4_driver = {
+ .name = "IOC4",
+ .id_table = ioc4_id_table,
+ .probe = ioc4_probe,
+ .remove = ioc4_remove,
};
-static int __devinit ioc4_detect(void)
+MODULE_DEVICE_TABLE(pci, ioc4_id_table);
+
+/*********************
+ * Module management *
+ *********************/
+
+/* Module load */
+static int __devinit
+ioc4_init(void)
{
- ioc4_serial_init();
+ return pci_register_driver(&ioc4_driver);
+}
- return pci_register_driver(&ioc4_s_driver);
+/* Module unload */
+static void __devexit
+ioc4_exit(void)
+{
+ pci_unregister_driver(&ioc4_driver);
}
-module_init(ioc4_detect);
-MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) <pfg@sgi.com>");
-MODULE_DESCRIPTION("PCI driver module for SGI IOC4 Base-IO Card");
+module_init(ioc4_init);
+module_exit(ioc4_exit);
+
+MODULE_AUTHOR("Brent Casavant - Silicon Graphics, Inc. <bcasavan@sgi.com>");
+MODULE_DESCRIPTION("PCI driver master module for SGI IOC4 Base-IO Card");
MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(ioc4_register_submodule);
+EXPORT_SYMBOL(ioc4_unregister_submodule);
diff --git a/include/linux/ioc4.h b/include/linux/ioc4.h
new file mode 100644
index 0000000..729bfa4
--- /dev/null
+++ b/include/linux/ioc4.h
@@ -0,0 +1,156 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2005 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+#ifndef _LINUX_IOC4_H
+#define _LINUX_IOC4_H
+
+#include <linux/interrupt.h>
+
+/***********************************
+ * Structures needed by subdrivers *
+ ***********************************/
+
+/* This structure fully describes the IOC4 miscellaneous registers which
+ * appear at bar[0]+0x00000 through bar[0]+0x0005c. The corresponding
+ * PCI resource is managed by the main IOC4 driver because it contains
+ * registers of interest to many different IOC4 subdrivers.
+ */
+struct ioc4_misc_regs {
+ /* Miscellaneous IOC4 registers */
+ union ioc4_pci_err_addr_l {
+ uint32_t raw;
+ struct {
+ uint32_t valid:1; /* Address captured */
+ uint32_t master_id:4; /* Unit causing error
+ * 0/1: Serial port 0 TX/RX
+ * 2/3: Serial port 1 TX/RX
+ * 4/5: Serial port 2 TX/RX
+ * 6/7: Serial port 3 TX/RX
+ * 8: ATA/ATAPI
+ * 9-15: Undefined
+ */
+ uint32_t mul_err:1; /* Multiple errors occurred */
+ uint32_t addr:26; /* Bits 31-6 of error addr */
+ } fields;
+ } pci_err_addr_l;
+ uint32_t pci_err_addr_h; /* Bits 63-32 of error addr */
+ union ioc4_sio_int {
+ uint32_t raw;
+ struct {
+ uint8_t tx_mt:1; /* TX ring buffer empty */
+ uint8_t rx_full:1; /* RX ring buffer full */
+ uint8_t rx_high:1; /* RX high-water exceeded */
+ uint8_t rx_timer:1; /* RX timer has triggered */
+ uint8_t delta_dcd:1; /* DELTA_DCD seen */
+ uint8_t delta_cts:1; /* DELTA_CTS seen */
+ uint8_t intr_pass:1; /* Interrupt pass-through */
+ uint8_t tx_explicit:1; /* TX, MCW, or delay complete */
+ } fields[4];
+ } sio_ir; /* Serial interrupt state */
+ union ioc4_other_int {
+ uint32_t raw;
+ struct {
+ uint32_t ata_int:1; /* ATA port passthru */
+ uint32_t ata_memerr:1; /* ATA halted by mem error */
+ uint32_t memerr:4; /* Serial halted by mem err */
+ uint32_t kbd_int:1; /* kbd/mouse intr asserted */
+ uint32_t reserved:16; /* zero */
+ uint32_t rt_int:1; /* INT_OUT section latch */
+ uint32_t gen_int:8; /* Intr. from generic pins */
+ } fields;
+ } other_ir; /* Other interrupt state */
+ union ioc4_sio_int sio_ies; /* Serial interrupt enable set */
+ union ioc4_other_int other_ies; /* Other interrupt enable set */
+ union ioc4_sio_int sio_iec; /* Serial interrupt enable clear */
+ union ioc4_other_int other_iec; /* Other interrupt enable clear */
+ union ioc4_sio_cr {
+ uint32_t raw;
+ struct {
+ uint32_t cmd_pulse:4; /* Bytebus strobe width */
+ uint32_t arb_diag:3; /* PCI bus requester */
+ uint32_t sio_diag_idle:1; /* Active ser req? */
+ uint32_t ata_diag_idle:1; /* Active ATA req? */
+ uint32_t ata_diag_active:1; /* ATA req is winner */
+ uint32_t reserved:22; /* zero */
+ } fields;
+ } sio_cr;
+ uint32_t unused1;
+ union ioc4_int_out {
+ uint32_t raw;
+ struct {
+ uint32_t count:16; /* Period control */
+ uint32_t mode:3; /* Output signal shape */
+ uint32_t reserved:11; /* zero */
+ uint32_t diag:1; /* Timebase control */
+ uint32_t int_out:1; /* Current value */
+ } fields;
+ } int_out; /* External interrupt output control */
+ uint32_t unused2;
+ union ioc4_gpcr {
+ uint32_t raw;
+ struct {
+ uint32_t dir:8; /* Pin direction */
+ uint32_t edge:8; /* Edge/level mode */
+ uint32_t reserved1:4; /* zero */
+ uint32_t int_out_en:1; /* INT_OUT enable */
+ uint32_t reserved2:11; /* zero */
+ } fields;
+ } gpcr_s; /* Generic PIO control set */
+ union ioc4_gpcr gpcr_c; /* Generic PIO control clear */
+ union ioc4_gpdr {
+ uint32_t raw;
+ struct {
+ uint32_t gen_pin:8; /* State of pins */
+ uint32_t reserved:24;
+ } fields;
+ } gpdr; /* Generic PIO data */
+ uint32_t unused3;
+ union ioc4_gppr {
+ uint32_t raw;
+ struct {
+ uint32_t gen_pin:1; /* Single pin state */
+ uint32_t reserved:31;
+ } fields;
+ } gppr[8]; /* Generic PIO pins */
+};
+
+/* One of these per IOC4
+ *
+ * The idd_serial_data field is present here, even though it's used
+ * solely by the serial subdriver, because the main IOC4 module
+ * properly owns pci_{get,set}_drvdata functionality. This field
+ * allows that subdriver to stash its own drvdata somewhere.
+ */
+struct ioc4_driver_data {
+ struct list_head idd_list;
+ unsigned long idd_bar0;
+ struct pci_dev *idd_pdev;
+ const struct pci_device_id *idd_pci_id;
+ struct __iomem ioc4_misc_regs *idd_misc_regs;
+ void *idd_serial_data;
+};
+
+/* One per submodule */
+struct ioc4_submodule {
+ struct list_head is_list;
+ char *is_name;
+ struct module *is_owner;
+ int (*is_probe) (struct ioc4_driver_data *);
+ int (*is_remove) (struct ioc4_driver_data *);
+};
+
+#define IOC4_NUM_CARDS 8 /* max cards per partition */
+
+/**********************************
+ * Functions needed by submodules *
+ **********************************/
+
+extern int ioc4_register_submodule(struct ioc4_submodule *);
+extern void ioc4_unregister_submodule(struct ioc4_submodule *);
+
+#endif /* _LINUX_IOC4_H */
diff --git a/include/linux/ioc4_common.h b/include/linux/ioc4_common.h
deleted file mode 100644
index b03bcc4..0000000
--- a/include/linux/ioc4_common.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2005 Silicon Graphics, Inc. All Rights Reserved.
- */
-
-#ifndef _LINUX_IOC4_COMMON_H
-#define _LINUX_IOC4_COMMON_H
-
-/* prototypes */
-
-int ioc4_serial_init(void);
-
-int ioc4_serial_attach_one(struct pci_dev *pdev, const struct
- pci_device_id *pci_id);
-int ioc4_ide_attach_one(struct pci_dev *pdev, const struct
- pci_device_id *pci_id);
-
-#endif /* _LINUX_IOC4_COMMON_H */
OpenPOWER on IntegriCloud