diff options
| -rw-r--r-- | MAINTAINERS | 2 | ||||
| -rw-r--r-- | include/linux/mfd/wm8994/registers.h | 15 | ||||
| -rw-r--r-- | sound/soc/codecs/wm8994.c | 43 |
3 files changed, 45 insertions, 15 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 4808256..c802e5f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6122,7 +6122,7 @@ F: sound/ SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC) M: Liam Girdwood <lrg@ti.com> M: Mark Brown <broonie@opensource.wolfsonmicro.com> -T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git L: alsa-devel@alsa-project.org (moderated for non-subscribers) W: http://alsa-project.org/main/index.php/ASoC S: Supported diff --git a/include/linux/mfd/wm8994/registers.h b/include/linux/mfd/wm8994/registers.h index fae2950..83a9cae 100644 --- a/include/linux/mfd/wm8994/registers.h +++ b/include/linux/mfd/wm8994/registers.h @@ -1963,6 +1963,21 @@ #define WM8958_MICB2_DISCH_WIDTH 1 /* MICB2_DISCH */ /* + * R210 (0xD2) - Mic Detect 3 + */ +#define WM8958_MICD_LVL_MASK 0x07FC /* MICD_LVL - [10:2] */ +#define WM8958_MICD_LVL_SHIFT 2 /* MICD_LVL - [10:2] */ +#define WM8958_MICD_LVL_WIDTH 9 /* MICD_LVL - [10:2] */ +#define WM8958_MICD_VALID 0x0002 /* MICD_VALID */ +#define WM8958_MICD_VALID_MASK 0x0002 /* MICD_VALID */ +#define WM8958_MICD_VALID_SHIFT 1 /* MICD_VALID */ +#define WM8958_MICD_VALID_WIDTH 1 /* MICD_VALID */ +#define WM8958_MICD_STS 0x0001 /* MICD_STS */ +#define WM8958_MICD_STS_MASK 0x0001 /* MICD_STS */ +#define WM8958_MICD_STS_SHIFT 0 /* MICD_STS */ +#define WM8958_MICD_STS_WIDTH 1 /* MICD_STS */ + +/* * R76 (0x4C) - Charge Pump (1) */ #define WM8994_CP_ENA 0x8000 /* CP_ENA */ diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 6b73efd..9c982e4 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -56,7 +56,7 @@ static int wm8994_retune_mobile_base[] = { static int wm8994_readable(struct snd_soc_codec *codec, unsigned int reg) { struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); - struct wm8994 *control = wm8994->control_data; + struct wm8994 *control = codec->control_data; switch (reg) { case WM8994_GPIO_1: @@ -3030,19 +3030,34 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data) { struct wm8994_priv *wm8994 = data; struct snd_soc_codec *codec = wm8994->codec; - int reg; + int reg, count; - reg = snd_soc_read(codec, WM8958_MIC_DETECT_3); - if (reg < 0) { - dev_err(codec->dev, "Failed to read mic detect status: %d\n", - reg); - return IRQ_NONE; - } + /* We may occasionally read a detection without an impedence + * range being provided - if that happens loop again. + */ + count = 10; + do { + reg = snd_soc_read(codec, WM8958_MIC_DETECT_3); + if (reg < 0) { + dev_err(codec->dev, + "Failed to read mic detect status: %d\n", + reg); + return IRQ_NONE; + } - if (!(reg & WM8958_MICD_VALID)) { - dev_dbg(codec->dev, "Mic detect data not valid\n"); - goto out; - } + if (!(reg & WM8958_MICD_VALID)) { + dev_dbg(codec->dev, "Mic detect data not valid\n"); + goto out; + } + + if (!(reg & WM8958_MICD_STS) || (reg & WM8958_MICD_LVL_MASK)) + break; + + msleep(1); + } while (count--); + + if (count == 0) + dev_warn(codec->dev, "No impedence range reported for jack\n"); #ifndef CONFIG_SND_SOC_WM8994_MODULE trace_snd_soc_jack_irq(dev_name(codec->dev)); @@ -3180,9 +3195,9 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) wm8994_request_irq(codec->control_data, WM8994_IRQ_FIFOS_ERR, wm8994_fifo_error, "FIFO error", codec); - wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_WARN, + wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_WARN, wm8994_temp_warn, "Thermal warning", codec); - wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_SHUT, + wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_SHUT, wm8994_temp_shut, "Thermal shutdown", codec); ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_DCS_DONE, |
