diff options
| -rw-r--r-- | MAINTAINERS | 8 | ||||
| -rw-r--r-- | drivers/acpi/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/misc/Kconfig | 17 | ||||
| -rw-r--r-- | drivers/misc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/misc/asus-laptop.c | 530 |
5 files changed, 564 insertions, 5 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index f0596e4..515289a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -584,6 +584,14 @@ W: http://sourceforge.net/projects/acpi4asus W: http://xf.iksaif.net/acpi4asus S: Maintained +ASUS LAPTOP EXTRAS DRIVER +P: Corentin Chary +M: corentincj@iksaif.net +L: acpi4asus-user@lists.sourceforge.net +W: http://sourceforge.net/projects/acpi4asus +W: http://xf.iksaif.net/acpi4asus +S: Maintained + ATA OVER ETHERNET DRIVER P: Ed L. Cashin M: ecashin@coraid.com diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index f4f000a..deed0de 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -186,19 +186,22 @@ config ACPI_ASUS Note: display switching code is currently considered EXPERIMENTAL, toying with these values may even lock your machine. - + All settings are changed via /proc/acpi/asus directory entries. Owner and group for these entries can be set with asus_uid and asus_gid parameters. - + More information and a userspace daemon for handling the extra buttons at <http://sourceforge.net/projects/acpi4asus/>. - + If you have an ACPI-compatible ASUS laptop, say Y or M here. This driver is still under development, so if your laptop is unsupported or something works not quite as expected, please use the mailing list - available on the above page (acpi4asus-user@lists.sourceforge.net) - + available on the above page (acpi4asus-user@lists.sourceforge.net). + + NOTE: This driver is deprecated and will probably be removed soon, + use asus-laptop instead. + config ACPI_IBM tristate "IBM ThinkPad Laptop Extras" depends on X86 diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 00db31c..4b1e367 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -69,6 +69,23 @@ config TIFM_7XX1 To compile this driver as a module, choose M here: the module will be called tifm_7xx1. +config ASUS_LAPTOP + tristate "Asus Laptop Extras (EXPERIMENTAL)" + depends on X86 + depends on ACPI + depends on EXPERIMENTAL && !ACPI_ASUS + ---help--- + This is the new Linux driver for Asus laptops. It may also support some + MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate + standard ACPI events that go through /proc/acpi/events. It also adds + support for video output switching, LCD backlight control, Bluetooth and + Wlan control, and most importantly, allows you to blink those fancy LEDs. + + For more information and a userspace daemon for handling the extra + buttons see <http://acpi4asus.sf.net/>. + + If you have an ACPI-compatible ASUS laptop, say Y or M here. + config MSI_LAPTOP tristate "MSI Laptop Extras" depends on X86 diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index c9e98ab..35da53c 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -6,6 +6,7 @@ obj- := misc.o # Dummy rule to force built-in.o to be made obj-$(CONFIG_IBM_ASM) += ibmasm/ obj-$(CONFIG_HDPU_FEATURES) += hdpuftrs/ obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o +obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c new file mode 100644 index 0000000..959b20f --- /dev/null +++ b/drivers/misc/asus-laptop.c @@ -0,0 +1,530 @@ +/* + * asus-laptop.c - Asus Laptop Support + * + * + * Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor + * Copyright (C) 2006 Corentin Chary + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * The development page for this driver is located at + * http://sourceforge.net/projects/acpi4asus/ + * + * Credits: + * Pontus Fuchs - Helper functions, cleanup + * Johann Wiesner - Small compile fixes + * John Belmonte - ACPI code for Toshiba laptop was a good starting point. + * Eric Burghard - LED display support for W1N + * Josh Green - Light Sens support + * Thomas Tuttle - His first patch for led support was very helpfull + * + */ + +#include <linux/autoconf.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/err.h> +#include <linux/proc_fs.h> +#include <linux/platform_device.h> +#include <acpi/acpi_drivers.h> +#include <acpi/acpi_bus.h> +#include <asm/uaccess.h> + +#define ASUS_LAPTOP_VERSION "0.40" + +#define ASUS_HOTK_NAME "Asus Laptop Support" +#define ASUS_HOTK_CLASS "hotkey" +#define ASUS_HOTK_DEVICE_NAME "Hotkey" +#define ASUS_HOTK_HID "ATK0100" +#define ASUS_HOTK_FILE "asus-laptop" +#define ASUS_HOTK_PREFIX "\\_SB.ATKD." + +#define ASUS_LOG ASUS_HOTK_FILE ": " +#define ASUS_ERR KERN_ERR ASUS_LOG +#define ASUS_WARNING KERN_WARNING ASUS_LOG +#define ASUS_NOTICE KERN_NOTICE ASUS_LOG +#define ASUS_INFO KERN_INFO ASUS_LOG +#define ASUS_DEBUG KERN_DEBUG ASUS_LOG + +MODULE_AUTHOR("Julien Lerouge, Karol Kozimor, Corentin Chary"); +MODULE_DESCRIPTION(ASUS_HOTK_NAME); +MODULE_LICENSE("GPL"); + +#define ASUS_HANDLE(object, paths...) \ + static acpi_handle object##_handle = NULL; \ + static char *object##_paths[] = { paths } + +/* + * This is the main structure, we can use it to store anything interesting + * about the hotk device + */ +struct asus_hotk { + char *name; //laptop name + struct acpi_device *device; //the device we are in + acpi_handle handle; //the handle of the hotk device + char status; //status of the hotk, for LEDs, ... + u16 event_count[128]; //count for each event TODO make this better +}; + +/* + * This header is made available to allow proper configuration given model, + * revision number , ... this info cannot go in struct asus_hotk because it is + * available before the hotk + */ +static struct acpi_table_header *asus_info; + +/* The actual device the driver binds to */ +static struct asus_hotk *hotk; + +/* + * The hotkey driver declaration + */ +static int asus_hotk_add(struct acpi_device *device); +static int asus_hotk_remove(struct acpi_device *device, int type); +static struct acpi_driver asus_hotk_driver = { + .name = ASUS_HOTK_NAME, + .class = ASUS_HOTK_CLASS, + .ids = ASUS_HOTK_HID, + .ops = { + .add = asus_hotk_add, + .remove = asus_hotk_remove, + }, +}; + +/* + * This function evaluates an ACPI method, given an int as parameter, the + * method is searched within the scope of the handle, can be NULL. The output + * of the method is written is output, which can also be NULL + * + * returns 1 if write is successful, 0 else. + */ +static int write_acpi_int(acpi_handle handle, const char *method, int val, + struct acpi_buffer *output) +{ + struct acpi_object_list params; //list of input parameters (an int here) + union acpi_object in_obj; //the only param we use + acpi_status status; + + params.count = 1; + params.pointer = &in_obj; + in_obj.type = ACPI_TYPE_INTEGER; + in_obj.integer.value = val; + + status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); + return (status == AE_OK); +} + +static int read_acpi_int(acpi_handle handle, const char *method, int *val, + struct acpi_object_list *params) +{ + struct acpi_buffer output; + union acpi_object out_obj; + acpi_status status; + + output.length = sizeof(out_obj); + output.pointer = &out_obj; + + status = acpi_evaluate_object(handle, (char *)method, params, &output); + *val = out_obj.integer.value; + return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER); +} + +/* + * Platform device handlers + */ + +/* + * We write our info in page, we begin at offset off and cannot write more + * than count bytes. We set eof to 1 if we handle those 2 values. We return the + * number of bytes written in page + */ +static ssize_t show_infos(struct device *dev, + struct device_attribute *attr, char *page) +{ + int len = 0; + int temp; + char buf[16]; //enough for all info + /* + * We use the easy way, we don't care of off and count, so we don't set eof + * to 1 + */ + + len += sprintf(page, ASUS_HOTK_NAME " " ASUS_LAPTOP_VERSION "\n"); + len += sprintf(page + len, "Model reference : %s\n", hotk->name); + /* + * The SFUN method probably allows the original driver to get the list + * of features supported by a given model. For now, 0x0100 or 0x0800 + * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card. + * The significance of others is yet to be found. + */ + if (read_acpi_int(hotk->handle, "SFUN", &temp, NULL)) + len += + sprintf(page + len, "SFUN value : 0x%04x\n", temp); + /* + * Another value for userspace: the ASYM method returns 0x02 for + * battery low and 0x04 for battery critical, its readings tend to be + * more accurate than those provided by _BST. + * Note: since not all the laptops provide this method, errors are + * silently ignored. + */ + if (read_acpi_int(hotk->handle, "ASYM", &temp, NULL)) + len += + sprintf(page + len, "ASYM value : 0x%04x\n", temp); + if (asus_info) { + snprintf(buf, 16, "%d", asus_info->length); + len += sprintf(page + len, "DSDT length : %s\n", buf); + snprintf(buf, 16, "%d", asus_info->checksum); + len += sprintf(page + len, "DSDT checksum : %s\n", buf); + snprintf(buf, 16, "%d", asus_info->revision); + len += sprintf(page + len, "DSDT revision : %s\n", buf); + snprintf(buf, 7, "%s", asus_info->oem_id); + len += sprintf(page + len, "OEM id : %s\n", buf); + snprintf(buf, 9, "%s", asus_info->oem_table_id); + len += sprintf(page + len, "OEM table id : %s\n", buf); + snprintf(buf, 16, "%x", asus_info->oem_revision); + len += sprintf(page + len, "OEM revision : 0x%s\n", buf); + snprintf(buf, 5, "%s", asus_info->asl_compiler_id); + len += sprintf(page + len, "ASL comp vendor id : %s\n", buf); + snprintf(buf, 16, "%x", asus_info->asl_compiler_revision); + len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf); + } + + return len; +} + +static int parse_arg(const char *buf, unsigned long count, int *val) +{ + if (!count) + return 0; + if (count > 31) + return -EINVAL; + if (sscanf(buf, "%i", val) != 1) + return -EINVAL; + return count; +} + +static void asus_hotk_notify(acpi_handle handle, u32 event, void *data) +{ + /* TODO Find a better way to handle events count. */ + if (!hotk) + return; + + acpi_bus_generate_event(hotk->device, event, + hotk->event_count[event % 128]++); + + return; +} + +#define ASUS_CREATE_DEVICE_ATTR(_name) \ + struct device_attribute dev_attr_##_name = { \ + .attr = { \ + .name = __stringify(_name), \ + .mode = 0, \ + .owner = THIS_MODULE }, \ + .show = NULL, \ + .store = NULL, \ + } + +#define ASUS_SET_DEVICE_ATTR(_name, _mode, _show, _store) \ + do { \ + dev_attr_##_name.attr.mode = _mode; \ + dev_attr_##_name.show = _show; \ + dev_attr_##_name.store = _store; \ + } while(0) + +static ASUS_CREATE_DEVICE_ATTR(infos); + +static struct attribute *asuspf_attributes[] = { + &dev_attr_infos.attr, + NULL +}; + +static struct attribute_group asuspf_attribute_group = { + .attrs = asuspf_attributes +}; + +static struct platform_driver asuspf_driver = { + .driver = { + .name = ASUS_HOTK_FILE, + .owner = THIS_MODULE, + } +}; + +static struct platform_device *asuspf_device; + + +static void asus_hotk_add_fs(void) +{ + ASUS_SET_DEVICE_ATTR(infos, 0444, show_infos, NULL); +} + +static int asus_handle_init(char *name, acpi_handle *handle, + char **paths, int num_paths) +{ + int i; + acpi_status status; + + for (i = 0; i < num_paths; i++) { + status = acpi_get_handle(NULL, paths[i], handle); + if (ACPI_SUCCESS(status)) + return 0; + } + + *handle = NULL; + return -ENODEV; +} + +#define ASUS_HANDLE_INIT(object) \ + asus_handle_init(#object, &object##_handle, object##_paths, \ + ARRAY_SIZE(object##_paths)) + + +/* + * This function is used to initialize the hotk with right values. In this + * method, we can make all the detection we want, and modify the hotk struct + */ +static int asus_hotk_get_info(void) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_buffer dsdt = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *model = NULL; + int bsts_result; + char *string = NULL; + acpi_status status; + + /* + * Get DSDT headers early enough to allow for differentiating between + * models, but late enough to allow acpi_bus_register_driver() to fail + * before doing anything ACPI-specific. Should we encounter a machine, + * which needs special handling (i.e. its hotkey device has a different + * HID), this bit will be moved. A global variable asus_info contains + * the DSDT header. + */ + status = acpi_get_table(ACPI_TABLE_ID_DSDT, 1, &dsdt); + if (ACPI_FAILURE(status)) + printk(ASUS_WARNING "Couldn't get the DSDT table header\n"); + else + asus_info = dsdt.pointer; + + /* We have to write 0 on init this far for all ASUS models */ + if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) { + printk(ASUS_ERR "Hotkey initialization failed\n"); + return -ENODEV; + } + + /* This needs to be called for some laptops to init properly */ + if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result, NULL)) + printk(ASUS_WARNING "Error calling BSTS\n"); + else if (bsts_result) + printk(ASUS_NOTICE "BSTS called, 0x%02x returned\n", + bsts_result); + + /* + * Try to match the object returned by INIT to the specific model. + * Handle every possible object (or the lack of thereof) the DSDT + * writers might throw at us. When in trouble, we pass NULL to + * asus_model_match() and try something completely different. + */ + if (buffer.pointer) { + model = buffer.pointer; + switch (model->type) { + case ACPI_TYPE_STRING: + string = model->string.pointer; + break; + case ACPI_TYPE_BUFFER: + string = model->buffer.pointer; + break; + default: + string = ""; + break; + } + } + hotk->name = kstrdup(string, GFP_KERNEL); + if (!hotk->name) + return -ENOMEM; + + if(*string) + printk(ASUS_NOTICE " %s model detected\n", string); + + kfree(model); + + return AE_OK; +} + +static int asus_hotk_check(void) +{ + int result = 0; + + result = acpi_bus_get_status(hotk->device); + if (result) + return result; + + if (hotk->device->status.present) { + result = asus_hotk_get_info(); + } else { + printk(ASUS_ERR "Hotkey device not present, aborting\n"); + return -EINVAL; + } + + return result; +} + +static int asus_hotk_found; + +static int asus_hotk_add(struct acpi_device *device) +{ + acpi_status status = AE_OK; + int result; + + if (!device) + return -EINVAL; + + printk(ASUS_NOTICE "Asus Laptop Support version %s\n", + ASUS_LAPTOP_VERSION); + + hotk = kmalloc(sizeof(struct asus_hotk), GFP_KERNEL); + if (!hotk) + return -ENOMEM; + memset(hotk, 0, sizeof(struct asus_hotk)); + + hotk->handle = device->handle; + strcpy(acpi_device_name(device), ASUS_HOTK_DEVICE_NAME); + strcpy(acpi_device_class(device), ASUS_HOTK_CLASS); + acpi_driver_data(device) = hotk; + hotk->device = device; + + result = asus_hotk_check(); + if (result) + goto end; + + asus_hotk_add_fs(); + + /* + * We install the handler, it will receive the hotk in parameter, so, we + * could add other data to the hotk struct + */ + status = acpi_install_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY, + asus_hotk_notify, hotk); + if (ACPI_FAILURE(status)) + printk(ASUS_ERR "Error installing notify handler\n"); + + asus_hotk_found = 1; + + end: + if (result) { + kfree(hotk->name); + kfree(hotk); + } + + return result; +} + +static int asus_hotk_remove(struct acpi_device *device, int type) +{ + acpi_status status = 0; + + if (!device || !acpi_driver_data(device)) + return -EINVAL; + + status = acpi_remove_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY, + asus_hotk_notify); + if (ACPI_FAILURE(status)) + printk(ASUS_ERR "Error removing notify handler\n"); + + kfree(hotk->name); + kfree(hotk); + + return 0; +} + +static void __exit asus_laptop_exit(void) +{ + acpi_bus_unregister_driver(&asus_hotk_driver); + sysfs_remove_group(&asuspf_device->dev.kobj, &asuspf_attribute_group); + platform_device_unregister(asuspf_device); + platform_driver_unregister(&asuspf_driver); + + kfree(asus_info); +} + +static int __init asus_laptop_init(void) +{ + int result; + + if (acpi_disabled) + return -ENODEV; + + if (!acpi_specific_hotkey_enabled) { + printk(ASUS_ERR "Using generic hotkey driver\n"); + return -ENODEV; + } + + result = acpi_bus_register_driver(&asus_hotk_driver); + if (result < 0) + return result; + + /* + * This is a bit of a kludge. We only want this module loaded + * for ASUS systems, but there's currently no way to probe the + * ACPI namespace for ASUS HIDs. So we just return failure if + * we didn't find one, which will cause the module to be + * unloaded. + */ + if (!asus_hotk_found) { + acpi_bus_unregister_driver(&asus_hotk_driver); + return -ENODEV; + } + + /* Register platform stuff */ + result = platform_driver_register(&asuspf_driver); + if (result) + goto fail_platform_driver; + + asuspf_device = platform_device_alloc(ASUS_HOTK_FILE, -1); + if (!asuspf_device) { + result = -ENOMEM; + goto fail_platform_device1; + } + + result = platform_device_add(asuspf_device); + if (result) + goto fail_platform_device2; + + result = sysfs_create_group(&asuspf_device->dev.kobj, + &asuspf_attribute_group); + if (result) + goto fail_sysfs; + + return 0; + +fail_sysfs: + platform_device_del(asuspf_device); + +fail_platform_device2: + platform_device_put(asuspf_device); + +fail_platform_device1: + platform_driver_unregister(&asuspf_driver); + +fail_platform_driver: + + return result; +} + +module_init(asus_laptop_init); +module_exit(asus_laptop_exit); |
