summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-mx5/board-mx51_efikamx.c50
-rw-r--r--arch/arm/mach-mx5/mx51_efika.c357
2 files changed, 407 insertions, 0 deletions
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 8f17336..acab191 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -25,6 +25,9 @@
#include <linux/fsl_devices.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
+#include <linux/mfd/mc13892.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
#include <mach/common.h>
#include <mach/hardware.h>
@@ -56,6 +59,10 @@
#define EFIKAMX_RESET1_1 IMX_GPIO_NR(3, 2)
#define EFIKAMX_RESET IMX_GPIO_NR(1, 4)
+#define EFIKAMX_POWEROFF IMX_GPIO_NR(4, 13)
+
+#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6)
+
/* the pci ids pin have pull up. they're driven low according to board id */
#define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
#define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, PAD_CTL_PUS_100K_UP)
@@ -79,6 +86,9 @@ static iomux_v3_cfg_t mx51efikamx_pads[] = {
/* reset */
MX51_PAD_DI1_PIN13__GPIO3_2,
MX51_PAD_GPIO1_4__GPIO1_4,
+
+ /* power off */
+ MX51_PAD_CSI2_VSYNC__GPIO4_13,
};
/* PCBID2 PCBID1 PCBID0 STATE
@@ -187,6 +197,46 @@ void mx51_efikamx_reset(void)
gpio_direction_output(EFIKAMX_RESET, 0);
}
+static struct regulator *pwgt1, *pwgt2, *coincell;
+
+static void mx51_efikamx_power_off(void)
+{
+ if (!IS_ERR(coincell))
+ regulator_disable(coincell);
+
+ if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
+ regulator_disable(pwgt2);
+ regulator_disable(pwgt1);
+ }
+ gpio_direction_output(EFIKAMX_POWEROFF, 1);
+}
+
+static int __init mx51_efikamx_power_init(void)
+{
+ if (machine_is_mx51_efikamx()) {
+ pwgt1 = regulator_get(NULL, "pwgt1");
+ pwgt2 = regulator_get(NULL, "pwgt2");
+ if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
+ regulator_enable(pwgt1);
+ regulator_enable(pwgt2);
+ }
+ gpio_request(EFIKAMX_POWEROFF, "poweroff");
+ pm_power_off = mx51_efikamx_power_off;
+
+ /* enable coincell charger. maybe need a small power driver ? */
+ coincell = regulator_get(NULL, "coincell");
+ if (!IS_ERR(coincell)) {
+ regulator_set_voltage(coincell, 3000000, 3000000);
+ regulator_enable(coincell);
+ }
+
+ regulator_has_full_constraints();
+ }
+
+ return 0;
+}
+late_initcall(mx51_efikamx_power_init);
+
static void __init mx51_efikamx_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index c08ec63..b4d5ae9 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -23,6 +23,9 @@
#include <linux/fsl_devices.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
+#include <linux/mfd/mc13892.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
#include <mach/common.h>
#include <mach/hardware.h>
@@ -39,6 +42,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <asm/mach-types.h>
#include "devices-imx51.h"
#include "devices.h"
@@ -54,6 +58,8 @@
#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24)
#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25)
+#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6)
+
static iomux_v3_cfg_t mx51efika_pads[] = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
@@ -90,6 +96,7 @@ static iomux_v3_cfg_t mx51efika_pads[] = {
MX51_PAD_CSPI1_SS1__GPIO4_25,
MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
+ MX51_PAD_GPIO1_6__GPIO1_6,
/* USB HOST1 */
MX51_PAD_USBH1_CLK__USBH1_CLK,
@@ -238,6 +245,336 @@ static struct flash_platform_data mx51_efika_spi_flash_data = {
.type = "sst25vf032b",
};
+static struct regulator_consumer_supply sw1_consumers[] = {
+ {
+ .supply = "cpu_vcc",
+ }
+};
+
+static struct regulator_consumer_supply vdig_consumers[] = {
+ /* sgtl5000 */
+ REGULATOR_SUPPLY("VDDA", "1-000a"),
+ REGULATOR_SUPPLY("VDDD", "1-000a"),
+};
+
+static struct regulator_consumer_supply vvideo_consumers[] = {
+ /* sgtl5000 */
+ REGULATOR_SUPPLY("VDDIO", "1-000a"),
+};
+
+static struct regulator_consumer_supply vsd_consumers[] = {
+ REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.0"),
+ REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.1"),
+};
+
+static struct regulator_consumer_supply pwgt1_consumer[] = {
+ {
+ .supply = "pwgt1",
+ }
+};
+
+static struct regulator_consumer_supply pwgt2_consumer[] = {
+ {
+ .supply = "pwgt2",
+ }
+};
+
+static struct regulator_consumer_supply coincell_consumer[] = {
+ {
+ .supply = "coincell",
+ }
+};
+
+static struct regulator_init_data sw1_init = {
+ .constraints = {
+ .name = "SW1",
+ .min_uV = 600000,
+ .max_uV = 1375000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .valid_modes_mask = 0,
+ .always_on = 1,
+ .boot_on = 1,
+ .state_mem = {
+ .uV = 850000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
+ .consumer_supplies = sw1_consumers,
+};
+
+static struct regulator_init_data sw2_init = {
+ .constraints = {
+ .name = "SW2",
+ .min_uV = 900000,
+ .max_uV = 1850000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .boot_on = 1,
+ .state_mem = {
+ .uV = 950000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ }
+};
+
+static struct regulator_init_data sw3_init = {
+ .constraints = {
+ .name = "SW3",
+ .min_uV = 1100000,
+ .max_uV = 1850000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data sw4_init = {
+ .constraints = {
+ .name = "SW4",
+ .min_uV = 1100000,
+ .max_uV = 1850000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .always_on = 1,
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data viohi_init = {
+ .constraints = {
+ .name = "VIOHI",
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
+static struct regulator_init_data vusb_init = {
+ .constraints = {
+ .name = "VUSB",
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
+static struct regulator_init_data swbst_init = {
+ .constraints = {
+ .name = "SWBST",
+ }
+};
+
+static struct regulator_init_data vdig_init = {
+ .constraints = {
+ .name = "VDIG",
+ .min_uV = 1050000,
+ .max_uV = 1800000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vdig_consumers),
+ .consumer_supplies = vdig_consumers,
+};
+
+static struct regulator_init_data vpll_init = {
+ .constraints = {
+ .name = "VPLL",
+ .min_uV = 1050000,
+ .max_uV = 1800000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
+static struct regulator_init_data vusb2_init = {
+ .constraints = {
+ .name = "VUSB2",
+ .min_uV = 2400000,
+ .max_uV = 2775000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
+static struct regulator_init_data vvideo_init = {
+ .constraints = {
+ .name = "VVIDEO",
+ .min_uV = 2775000,
+ .max_uV = 2775000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .apply_uV = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vvideo_consumers),
+ .consumer_supplies = vvideo_consumers,
+};
+
+static struct regulator_init_data vaudio_init = {
+ .constraints = {
+ .name = "VAUDIO",
+ .min_uV = 2300000,
+ .max_uV = 3000000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data vsd_init = {
+ .constraints = {
+ .name = "VSD",
+ .min_uV = 1800000,
+ .max_uV = 3150000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vsd_consumers),
+ .consumer_supplies = vsd_consumers,
+};
+
+static struct regulator_init_data vcam_init = {
+ .constraints = {
+ .name = "VCAM",
+ .min_uV = 2500000,
+ .max_uV = 3000000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
+ .boot_on = 1,
+ }
+};
+
+static struct regulator_init_data vgen1_init = {
+ .constraints = {
+ .name = "VGEN1",
+ .min_uV = 1200000,
+ .max_uV = 3150000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
+static struct regulator_init_data vgen2_init = {
+ .constraints = {
+ .name = "VGEN2",
+ .min_uV = 1200000,
+ .max_uV = 3150000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
+static struct regulator_init_data vgen3_init = {
+ .constraints = {
+ .name = "VGEN3",
+ .min_uV = 1800000,
+ .max_uV = 2900000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ .always_on = 1,
+ }
+};
+
+static struct regulator_init_data gpo1_init = {
+ .constraints = {
+ .name = "GPO1",
+ }
+};
+
+static struct regulator_init_data gpo2_init = {
+ .constraints = {
+ .name = "GPO2",
+ }
+};
+
+static struct regulator_init_data gpo3_init = {
+ .constraints = {
+ .name = "GPO3",
+ }
+};
+
+static struct regulator_init_data gpo4_init = {
+ .constraints = {
+ .name = "GPO4",
+ }
+};
+
+static struct regulator_init_data pwgt1_init = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer),
+ .consumer_supplies = pwgt1_consumer,
+};
+
+static struct regulator_init_data pwgt2_init = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer),
+ .consumer_supplies = pwgt2_consumer,
+};
+
+static struct regulator_init_data vcoincell_init = {
+ .constraints = {
+ .name = "COINCELL",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(coincell_consumer),
+ .consumer_supplies = coincell_consumer,
+};
+
+static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = {
+ { .id = MC13892_SW1, .init_data = &sw1_init },
+ { .id = MC13892_SW2, .init_data = &sw2_init },
+ { .id = MC13892_SW3, .init_data = &sw3_init },
+ { .id = MC13892_SW4, .init_data = &sw4_init },
+ { .id = MC13892_SWBST, .init_data = &swbst_init },
+ { .id = MC13892_VIOHI, .init_data = &viohi_init },
+ { .id = MC13892_VPLL, .init_data = &vpll_init },
+ { .id = MC13892_VDIG, .init_data = &vdig_init },
+ { .id = MC13892_VSD, .init_data = &vsd_init },
+ { .id = MC13892_VUSB2, .init_data = &vusb2_init },
+ { .id = MC13892_VVIDEO, .init_data = &vvideo_init },
+ { .id = MC13892_VAUDIO, .init_data = &vaudio_init },
+ { .id = MC13892_VCAM, .init_data = &vcam_init },
+ { .id = MC13892_VGEN1, .init_data = &vgen1_init },
+ { .id = MC13892_VGEN2, .init_data = &vgen2_init },
+ { .id = MC13892_VGEN3, .init_data = &vgen3_init },
+ { .id = MC13892_VUSB, .init_data = &vusb_init },
+ { .id = MC13892_GPO1, .init_data = &gpo1_init },
+ { .id = MC13892_GPO2, .init_data = &gpo2_init },
+ { .id = MC13892_GPO3, .init_data = &gpo3_init },
+ { .id = MC13892_GPO4, .init_data = &gpo4_init },
+ { .id = MC13892_PWGT1SPI, .init_data = &pwgt1_init },
+ { .id = MC13892_PWGT2SPI, .init_data = &pwgt2_init },
+ { .id = MC13892_VCOINCELL, .init_data = &vcoincell_init },
+};
+
+static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
+ .flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR,
+ .num_regulators = ARRAY_SIZE(mx51_efika_regulators),
+ .regulators = mx51_efika_regulators,
+};
+
static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
{
.modalias = "m25p80",
@@ -247,6 +584,14 @@ static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
.platform_data = &mx51_efika_spi_flash_data,
.irq = -1,
},
+ {
+ .modalias = "mc13892",
+ .max_speed_hz = 1000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .platform_data = &mx51_efika_mc13892_data,
+ .irq = gpio_to_irq(EFIKAMX_PMIC),
+ },
};
static int mx51_efika_spi_cs[] = {
@@ -267,6 +612,18 @@ void __init efika_board_common_init(void)
mx51_efika_usb();
imx51_add_sdhci_esdhc_imx(0, NULL);
+ /* FIXME: comes from original code. check this. */
+ if (mx51_revision() < IMX_CHIP_REVISION_2_0)
+ sw2_init.constraints.state_mem.uV = 1100000;
+ else if (mx51_revision() == IMX_CHIP_REVISION_2_0) {
+ sw2_init.constraints.state_mem.uV = 1250000;
+ sw1_init.constraints.state_mem.uV = 1000000;
+ }
+ if (machine_is_mx51_efikasb())
+ vgen1_init.constraints.max_uV = 1200000;
+
+ gpio_request(EFIKAMX_PMIC, "pmic irq");
+ gpio_direction_input(EFIKAMX_PMIC);
spi_register_board_info(mx51_efika_spi_board_info,
ARRAY_SIZE(mx51_efika_spi_board_info));
imx51_add_ecspi(0, &mx51_efika_spi_pdata);
OpenPOWER on IntegriCloud