diff options
| -rw-r--r-- | drivers/acpi/acpica/Makefile | 2 | ||||
| -rw-r--r-- | drivers/acpi/acpica/acevents.h | 50 | ||||
| -rw-r--r-- | drivers/acpi/acpica/evgpeblk.c | 909 | ||||
| -rw-r--r-- | drivers/acpi/acpica/evgpeinit.c | 653 | ||||
| -rw-r--r-- | drivers/acpi/acpica/evgpeutil.c | 337 |
5 files changed, 1025 insertions, 926 deletions
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index c110209..d93cc06 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -14,7 +14,7 @@ acpi-y := dsfield.o dsmthdat.o dsopcode.o dswexec.o dswscope.o \ acpi-y += evevent.o evregion.o evsci.o evxfevnt.o \ evmisc.o evrgnini.o evxface.o evxfregn.o \ - evgpe.o evgpeblk.o + evgpe.o evgpeblk.o evgpeinit.o evgpeutil.o acpi-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\ exconvrt.o exfldio.o exoparg1.o exprep.o exresop.o exsystem.o\ diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index 0f83dc4..64d1e5c 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -73,8 +73,10 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node *node, u32 notify_value); /* - * evgpe - GPE handling and dispatch + * evgpe - Low-level GPE support */ +u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list); + acpi_status acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info); @@ -90,18 +92,8 @@ struct acpi_gpe_event_info *acpi_ev_low_get_gpe_info(u32 gpe_number, *gpe_block); /* - * evgpeblk + * evgpeblk - Upper-level GPE block support */ -u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info); - -acpi_status -acpi_ev_walk_gpe_list(acpi_gpe_callback gpe_walk_callback, void *context); - -acpi_status -acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, - struct acpi_gpe_block_info *gpe_block, - void *context); - acpi_status acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, struct acpi_generic_address *gpe_block_address, @@ -110,8 +102,6 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, u32 interrupt_number, struct acpi_gpe_block_info **return_gpe_block); -void acpi_ev_update_gpes(acpi_owner_id table_owner_id); - acpi_status acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, struct acpi_gpe_block_info *gpe_block); @@ -122,10 +112,38 @@ u32 acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number); -u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list); - +/* + * evgpeinit - GPE initialization and update + */ acpi_status acpi_ev_gpe_initialize(void); +void acpi_ev_update_gpes(acpi_owner_id table_owner_id); + +acpi_status +acpi_ev_match_gpe_method(acpi_handle obj_handle, + u32 level, void *context, void **return_value); + +acpi_status +acpi_ev_match_prw_and_gpe(acpi_handle obj_handle, + u32 level, void *context, void **return_value); + +/* + * evgpeutil - GPE utilities + */ +acpi_status +acpi_ev_walk_gpe_list(acpi_gpe_callback gpe_walk_callback, void *context); + +u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info); + +struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32 interrupt_number); + +acpi_status acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt); + +acpi_status +acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, + struct acpi_gpe_block_info *gpe_block, + void *context); + /* * evregion - Address Space handling */ diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index 3341d1d..7c28f2d 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -45,27 +45,12 @@ #include "accommon.h" #include "acevents.h" #include "acnamesp.h" -#include "acinterp.h" #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpeblk") /* Local prototypes */ static acpi_status -acpi_ev_match_gpe_method(acpi_handle obj_handle, - u32 level, void *obj_desc, void **return_value); - -static acpi_status -acpi_ev_match_prw_and_gpe(acpi_handle obj_handle, - u32 level, void *info, void **return_value); - -static struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32 - interrupt_number); - -static acpi_status -acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt); - -static acpi_status acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block, u32 interrupt_number); @@ -74,632 +59,6 @@ acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block); /******************************************************************************* * - * FUNCTION: acpi_ev_valid_gpe_event - * - * PARAMETERS: gpe_event_info - Info for this GPE - * - * RETURN: TRUE if the gpe_event is valid - * - * DESCRIPTION: Validate a GPE event. DO NOT CALL FROM INTERRUPT LEVEL. - * Should be called only when the GPE lists are semaphore locked - * and not subject to change. - * - ******************************************************************************/ - -u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info) -{ - struct acpi_gpe_xrupt_info *gpe_xrupt_block; - struct acpi_gpe_block_info *gpe_block; - - ACPI_FUNCTION_ENTRY(); - - /* No need for spin lock since we are not changing any list elements */ - - /* Walk the GPE interrupt levels */ - - gpe_xrupt_block = acpi_gbl_gpe_xrupt_list_head; - while (gpe_xrupt_block) { - gpe_block = gpe_xrupt_block->gpe_block_list_head; - - /* Walk the GPE blocks on this interrupt level */ - - while (gpe_block) { - if ((&gpe_block->event_info[0] <= gpe_event_info) && - (&gpe_block->event_info[gpe_block->gpe_count] > - gpe_event_info)) { - return (TRUE); - } - - gpe_block = gpe_block->next; - } - - gpe_xrupt_block = gpe_xrupt_block->next; - } - - return (FALSE); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ev_walk_gpe_list - * - * PARAMETERS: gpe_walk_callback - Routine called for each GPE block - * Context - Value passed to callback - * - * RETURN: Status - * - * DESCRIPTION: Walk the GPE lists. - * - ******************************************************************************/ - -acpi_status -acpi_ev_walk_gpe_list(acpi_gpe_callback gpe_walk_callback, void *context) -{ - struct acpi_gpe_block_info *gpe_block; - struct acpi_gpe_xrupt_info *gpe_xrupt_info; - acpi_status status = AE_OK; - acpi_cpu_flags flags; - - ACPI_FUNCTION_TRACE(ev_walk_gpe_list); - - flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); - - /* Walk the interrupt level descriptor list */ - - gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head; - while (gpe_xrupt_info) { - - /* Walk all Gpe Blocks attached to this interrupt level */ - - gpe_block = gpe_xrupt_info->gpe_block_list_head; - while (gpe_block) { - - /* One callback per GPE block */ - - status = - gpe_walk_callback(gpe_xrupt_info, gpe_block, - context); - if (ACPI_FAILURE(status)) { - if (status == AE_CTRL_END) { /* Callback abort */ - status = AE_OK; - } - goto unlock_and_exit; - } - - gpe_block = gpe_block->next; - } - - gpe_xrupt_info = gpe_xrupt_info->next; - } - - unlock_and_exit: - acpi_os_release_lock(acpi_gbl_gpe_lock, flags); - return_ACPI_STATUS(status); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ev_delete_gpe_handlers - * - * PARAMETERS: gpe_xrupt_info - GPE Interrupt info - * gpe_block - Gpe Block info - * - * RETURN: Status - * - * DESCRIPTION: Delete all Handler objects found in the GPE data structs. - * Used only prior to termination. - * - ******************************************************************************/ - -acpi_status -acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, - struct acpi_gpe_block_info *gpe_block, - void *context) -{ - struct acpi_gpe_event_info *gpe_event_info; - u32 i; - u32 j; - - ACPI_FUNCTION_TRACE(ev_delete_gpe_handlers); - - /* Examine each GPE Register within the block */ - - for (i = 0; i < gpe_block->register_count; i++) { - - /* Now look at the individual GPEs in this byte register */ - - for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) { - gpe_event_info = &gpe_block->event_info[((acpi_size) i * - ACPI_GPE_REGISTER_WIDTH) - + j]; - - if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == - ACPI_GPE_DISPATCH_HANDLER) { - ACPI_FREE(gpe_event_info->dispatch.handler); - gpe_event_info->dispatch.handler = NULL; - gpe_event_info->flags &= - ~ACPI_GPE_DISPATCH_MASK; - } - } - } - - return_ACPI_STATUS(AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ev_match_gpe_method - * - * PARAMETERS: Callback from walk_namespace - * - * RETURN: Status - * - * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a - * control method under the _GPE portion of the namespace. - * Extract the name and GPE type from the object, saving this - * information for quick lookup during GPE dispatch. Allows a - * per-owner_id evaluation if execute_by_owner_id is TRUE in the - * walk_info parameter block. - * - * The name of each GPE control method is of the form: - * "_Lxx" or "_Exx", where: - * L - means that the GPE is level triggered - * E - means that the GPE is edge triggered - * xx - is the GPE number [in HEX] - * - * If walk_info->execute_by_owner_id is TRUE, we only execute examine GPE methods - * with that owner. - * If walk_info->enable_this_gpe is TRUE, the GPE that is referred to by a GPE - * method is immediately enabled (Used for Load/load_table operators) - * - ******************************************************************************/ - -static acpi_status -acpi_ev_match_gpe_method(acpi_handle obj_handle, - u32 level, void *context, void **return_value) -{ - struct acpi_namespace_node *method_node = - ACPI_CAST_PTR(struct acpi_namespace_node, obj_handle); - struct acpi_gpe_walk_info *walk_info = - ACPI_CAST_PTR(struct acpi_gpe_walk_info, context); - struct acpi_gpe_event_info *gpe_event_info; - struct acpi_namespace_node *gpe_device; - acpi_status status; - u32 gpe_number; - char name[ACPI_NAME_SIZE + 1]; - u8 type; - - ACPI_FUNCTION_TRACE(ev_match_gpe_method); - - /* Check if requested owner_id matches this owner_id */ - - if ((walk_info->execute_by_owner_id) && - (method_node->owner_id != walk_info->owner_id)) { - return_ACPI_STATUS(AE_OK); - } - - /* - * Match and decode the _Lxx and _Exx GPE method names - * - * 1) Extract the method name and null terminate it - */ - ACPI_MOVE_32_TO_32(name, &method_node->name.integer); - name[ACPI_NAME_SIZE] = 0; - - /* 2) Name must begin with an underscore */ - - if (name[0] != '_') { - return_ACPI_STATUS(AE_OK); /* Ignore this method */ - } - - /* - * 3) Edge/Level determination is based on the 2nd character - * of the method name - * - * NOTE: Default GPE type is RUNTIME only. Later, if a _PRW object is - * found that points to this GPE, the ACPI_GPE_CAN_WAKE flag is set. - */ - switch (name[1]) { - case 'L': - type = ACPI_GPE_LEVEL_TRIGGERED; - break; - - case 'E': - type = ACPI_GPE_EDGE_TRIGGERED; - break; - - default: - /* Unknown method type, just ignore it */ - - ACPI_DEBUG_PRINT((ACPI_DB_LOAD, - "Ignoring unknown GPE method type: %s " - "(name not of form _Lxx or _Exx)", name)); - return_ACPI_STATUS(AE_OK); - } - - /* 4) The last two characters of the name are the hex GPE Number */ - - gpe_number = ACPI_STRTOUL(&name[2], NULL, 16); - if (gpe_number == ACPI_UINT32_MAX) { - - /* Conversion failed; invalid method, just ignore it */ - - ACPI_DEBUG_PRINT((ACPI_DB_LOAD, - "Could not extract GPE number from name: %s " - "(name is not of form _Lxx or _Exx)", name)); - return_ACPI_STATUS(AE_OK); - } - - /* Ensure that we have a valid GPE number for this GPE block */ - - gpe_event_info = - acpi_ev_low_get_gpe_info(gpe_number, walk_info->gpe_block); - if (!gpe_event_info) { - /* - * This gpe_number is not valid for this GPE block, just ignore it. - * However, it may be valid for a different GPE block, since GPE0 - * and GPE1 methods both appear under \_GPE. - */ - return_ACPI_STATUS(AE_OK); - } - - if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == - ACPI_GPE_DISPATCH_HANDLER) { - - /* If there is already a handler, ignore this GPE method */ - - return_ACPI_STATUS(AE_OK); - } - - if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == - ACPI_GPE_DISPATCH_METHOD) { - /* - * If there is already a method, ignore this method. But check - * for a type mismatch (if both the _Lxx AND _Exx exist) - */ - if (type != (gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK)) { - ACPI_ERROR((AE_INFO, - "For GPE 0x%.2X, found both _L%2.2X and _E%2.2X methods", - gpe_number, gpe_number, gpe_number)); - } - return_ACPI_STATUS(AE_OK); - } - - /* - * Add the GPE information from above to the gpe_event_info block for - * use during dispatch of this GPE. - */ - gpe_event_info->flags |= (u8)(type | ACPI_GPE_DISPATCH_METHOD); - gpe_event_info->dispatch.method_node = method_node; - - /* - * Enable this GPE if requested. This only happens when during the - * execution of a Load or load_table operator. We have found a new - * GPE method and want to immediately enable the GPE if it is a - * runtime GPE. - */ - if (walk_info->enable_this_gpe) { - - /* Ignore GPEs that can wake the system */ - - if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE) || - !acpi_gbl_leave_wake_gpes_disabled) { - walk_info->count++; - gpe_device = walk_info->gpe_device; - - if (gpe_device == acpi_gbl_fadt_gpe_device) { - gpe_device = NULL; - } - - status = acpi_enable_gpe(gpe_device, gpe_number, - ACPI_GPE_TYPE_RUNTIME); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "Could not enable GPE 0x%02X", - gpe_number)); - } - } - } - - ACPI_DEBUG_PRINT((ACPI_DB_LOAD, - "Registered GPE method %s as GPE number 0x%.2X\n", - name, gpe_number)); - return_ACPI_STATUS(AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ev_match_prw_and_gpe - * - * PARAMETERS: Callback from walk_namespace - * - * RETURN: Status. NOTE: We ignore errors so that the _PRW walk is - * not aborted on a single _PRW failure. - * - * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a - * Device. Run the _PRW method. If present, extract the GPE - * number and mark the GPE as a CAN_WAKE GPE. Allows a - * per-owner_id execution if execute_by_owner_id is TRUE in the - * walk_info parameter block. - * - * If walk_info->execute_by_owner_id is TRUE, we only execute _PRWs with that - * owner. - * If walk_info->gpe_device is NULL, we execute every _PRW found. Otherwise, - * we only execute _PRWs that refer to the input gpe_device. - * - ******************************************************************************/ - -static acpi_status -acpi_ev_match_prw_and_gpe(acpi_handle obj_handle, - u32 level, void *context, void **return_value) -{ - struct acpi_gpe_walk_info *walk_info = - ACPI_CAST_PTR(struct acpi_gpe_walk_info, context); - struct acpi_namespace_node *gpe_device; - struct acpi_gpe_block_info *gpe_block; - struct acpi_namespace_node *target_gpe_device; - struct acpi_namespace_node *prw_node; - struct acpi_gpe_event_info *gpe_event_info; - union acpi_operand_object *pkg_desc; - union acpi_operand_object *obj_desc; - u32 gpe_number; - acpi_status status; - - ACPI_FUNCTION_TRACE(ev_match_prw_and_gpe); - - /* Check for a _PRW method under this device */ - - status = acpi_ns_get_node(obj_handle, METHOD_NAME__PRW, - ACPI_NS_NO_UPSEARCH, &prw_node); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(AE_OK); - } - - /* Check if requested owner_id matches this owner_id */ - - if ((walk_info->execute_by_owner_id) && - (prw_node->owner_id != walk_info->owner_id)) { - return_ACPI_STATUS(AE_OK); - } - - /* Execute the _PRW */ - - status = acpi_ut_evaluate_object(prw_node, NULL, - ACPI_BTYPE_PACKAGE, &pkg_desc); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(AE_OK); - } - - /* The returned _PRW package must have at least two elements */ - - if (pkg_desc->package.count < 2) { - goto cleanup; - } - - /* Extract pointers from the input context */ - - gpe_device = walk_info->gpe_device; - gpe_block = walk_info->gpe_block; - - /* - * The _PRW object must return a package, we are only interested - * in the first element - */ - obj_desc = pkg_desc->package.elements[0]; - - if (obj_desc->common.type == ACPI_TYPE_INTEGER) { - - /* Use FADT-defined GPE device (from definition of _PRW) */ - - target_gpe_device = NULL; - if (gpe_device) { - target_gpe_device = acpi_gbl_fadt_gpe_device; - } - - /* Integer is the GPE number in the FADT described GPE blocks */ - - gpe_number = (u32) obj_desc->integer.value; - } else if (obj_desc->common.type == ACPI_TYPE_PACKAGE) { - - /* Package contains a GPE reference and GPE number within a GPE block */ - - if ((obj_desc->package.count < 2) || - ((obj_desc->package.elements[0])->common.type != - ACPI_TYPE_LOCAL_REFERENCE) || - ((obj_desc->package.elements[1])->common.type != - ACPI_TYPE_INTEGER)) { - goto cleanup; - } - - /* Get GPE block reference and decode */ - - target_gpe_device = - obj_desc->package.elements[0]->reference.node; - gpe_number = (u32) obj_desc->package.elements[1]->integer.value; - } else { - /* Unknown type, just ignore it */ - - goto cleanup; - } - - /* Get the gpe_event_info for this GPE */ - - if (gpe_device) { - /* - * Is this GPE within this block? - * - * TRUE if and only if these conditions are true: - * 1) The GPE devices match. - * 2) The GPE index(number) is within the range of the Gpe Block - * associated with the GPE device. - */ - if (gpe_device != target_gpe_device) { - goto cleanup; - } - - gpe_event_info = - acpi_ev_low_get_gpe_info(gpe_number, gpe_block); - } else { - /* gpe_device is NULL, just match the target_device and gpe_number */ - - gpe_event_info = - acpi_ev_get_gpe_event_info(target_gpe_device, gpe_number); - } - - if (gpe_event_info) { - if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) { - - /* This GPE can wake the system */ - - gpe_event_info->flags |= ACPI_GPE_CAN_WAKE; - walk_info->count++; - } - } - - cleanup: - acpi_ut_remove_reference(pkg_desc); - return_ACPI_STATUS(AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ev_get_gpe_xrupt_block - * - * PARAMETERS: interrupt_number - Interrupt for a GPE block - * - * RETURN: A GPE interrupt block - * - * DESCRIPTION: Get or Create a GPE interrupt block. There is one interrupt - * block per unique interrupt level used for GPEs. Should be - * called only when the GPE lists are semaphore locked and not - * subject to change. - * - ******************************************************************************/ - -static struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32 - interrupt_number) -{ - struct acpi_gpe_xrupt_info *next_gpe_xrupt; - struct acpi_gpe_xrupt_info *gpe_xrupt; - acpi_status status; - acpi_cpu_flags flags; - - ACPI_FUNCTION_TRACE(ev_get_gpe_xrupt_block); - - /* No need for lock since we are not changing any list elements here */ - - next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head; - while (next_gpe_xrupt) { - if (next_gpe_xrupt->interrupt_number == interrupt_number) { - return_PTR(next_gpe_xrupt); - } - - next_gpe_xrupt = next_gpe_xrupt->next; - } - - /* Not found, must allocate a new xrupt descriptor */ - - gpe_xrupt = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_xrupt_info)); - if (!gpe_xrupt) { - return_PTR(NULL); - } - - gpe_xrupt->interrupt_number = interrupt_number; - - /* Install new interrupt descriptor with spin lock */ - - flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); - if (acpi_gbl_gpe_xrupt_list_head) { - next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head; - while (next_gpe_xrupt->next) { - next_gpe_xrupt = next_gpe_xrupt->next; - } - - next_gpe_xrupt->next = gpe_xrupt; - gpe_xrupt->previous = next_gpe_xrupt; - } else { - acpi_gbl_gpe_xrupt_list_head = gpe_xrupt; - } - acpi_os_release_lock(acpi_gbl_gpe_lock, flags); - - /* Install new interrupt handler if not SCI_INT */ - - if (interrupt_number != acpi_gbl_FADT.sci_interrupt) { - status = acpi_os_install_interrupt_handler(interrupt_number, - acpi_ev_gpe_xrupt_handler, - gpe_xrupt); - if (ACPI_FAILURE(status)) { - ACPI_ERROR((AE_INFO, - "Could not install GPE interrupt handler at level 0x%X", - interrupt_number)); - return_PTR(NULL); - } - } - - return_PTR(gpe_xrupt); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ev_delete_gpe_xrupt - * - * PARAMETERS: gpe_xrupt - A GPE interrupt info block - * - * RETURN: Status - * - * DESCRIPTION: Remove and free a gpe_xrupt block. Remove an associated - * interrupt handler if not the SCI interrupt. - * - ******************************************************************************/ - -static acpi_status -acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt) -{ - acpi_status status; - acpi_cpu_flags flags; - - ACPI_FUNCTION_TRACE(ev_delete_gpe_xrupt); - - /* We never want to remove the SCI interrupt handler */ - - if (gpe_xrupt->interrupt_number == acpi_gbl_FADT.sci_interrupt) { - gpe_xrupt->gpe_block_list_head = NULL; - return_ACPI_STATUS(AE_OK); - } - - /* Disable this interrupt */ - - status = - acpi_os_remove_interrupt_handler(gpe_xrupt->interrupt_number, - acpi_ev_gpe_xrupt_handler); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Unlink the interrupt block with lock */ - - flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); - if (gpe_xrupt->previous) { - gpe_xrupt->previous->next = gpe_xrupt->next; - } else { - /* No previous, update list head */ - - acpi_gbl_gpe_xrupt_list_head = gpe_xrupt->next; - } - - if (gpe_xrupt->next) { - gpe_xrupt->next->previous = gpe_xrupt->previous; - } - acpi_os_release_lock(acpi_gbl_gpe_lock, flags); - - /* Free the block */ - - ACPI_FREE(gpe_xrupt); - return_ACPI_STATUS(AE_OK); -} - -/******************************************************************************* - * * FUNCTION: acpi_ev_install_gpe_block * * PARAMETERS: gpe_block - New GPE block @@ -1060,123 +419,6 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, /******************************************************************************* * - * FUNCTION: acpi_ev_update_gpes - * - * PARAMETERS: table_owner_id - ID of the newly-loaded ACPI table - * - * RETURN: None - * - * DESCRIPTION: Check for new GPE methods (_Lxx/_Exx) made available as a - * result of a Load() or load_table() operation. If new GPE - * methods have been installed, register the new methods and - * enable and runtime GPEs that are associated with them. Also, - * run any newly loaded _PRW methods in order to discover any - * new CAN_WAKE GPEs. - * - ******************************************************************************/ - -void acpi_ev_update_gpes(acpi_owner_id table_owner_id) -{ - struct acpi_gpe_xrupt_info *gpe_xrupt_info; - struct acpi_gpe_block_info *gpe_block; - struct acpi_gpe_walk_info walk_info; - acpi_status status = AE_OK; - u32 new_wake_gpe_count = 0; - - /* We will examine only _PRW/_Lxx/_Exx methods owned by this table */ - - walk_info.owner_id = table_owner_id; - walk_info.execute_by_owner_id = TRUE; - walk_info.count = 0; - - if (acpi_gbl_leave_wake_gpes_disabled) { - /* - * 1) Run any newly-loaded _PRW methods to find any GPEs that - * can now be marked as CAN_WAKE GPEs. Note: We must run the - * _PRW methods before we process the _Lxx/_Exx methods because - * we will enable all runtime GPEs associated with the new - * _Lxx/_Exx methods at the time we process those methods. - * - * Unlock interpreter so that we can run the _PRW methods. - */ - walk_info.gpe_block = NULL; - walk_info.gpe_device = NULL; - - acpi_ex_exit_interpreter(); - - status = - acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, - ACPI_NS_WALK_NO_UNLOCK, - acpi_ev_match_prw_and_gpe, NULL, - &walk_info, NULL); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "While executing _PRW methods")); - } - - acpi_ex_enter_interpreter(); - new_wake_gpe_count = walk_info.count; - } - - /* - * 2) Find any _Lxx/_Exx GPE methods that have just been loaded. - * - * Any GPEs that correspond to new _Lxx/_Exx methods and are not - * marked as CAN_WAKE are immediately enabled. - * - * Examine the namespace underneath each gpe_device within the - * gpe_block lists. - */ - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return; - } - - walk_info.count = 0; - walk_info.enable_this_gpe = TRUE; - - /* Walk the interrupt level descriptor list */ - - gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head; - while (gpe_xrupt_info) { - - /* Walk all Gpe Blocks attached to this interrupt level */ - - gpe_block = gpe_xrupt_info->gpe_block_list_head; - while (gpe_block) { - walk_info.gpe_block = gpe_block; - walk_info.gpe_device = gpe_block->node; - - status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD, - walk_info.gpe_device, - ACPI_UINT32_MAX, - ACPI_NS_WALK_NO_UNLOCK, - acpi_ev_match_gpe_method, - NULL, &walk_info, NULL); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "While decoding _Lxx/_Exx methods")); - } - - gpe_block = gpe_block->next; - } - - gpe_xrupt_info = gpe_xrupt_info->next; - } - - if (walk_info.count || new_wake_gpe_count) { - ACPI_INFO((AE_INFO, - "Enabled %u new runtime GPEs, added %u new wakeup GPEs", - walk_info.count, new_wake_gpe_count)); - } - - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - return; -} - -/******************************************************************************* - * * FUNCTION: acpi_ev_initialize_gpe_block * * PARAMETERS: gpe_device - Handle to the parent GPE block @@ -1296,154 +538,3 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, return_ACPI_STATUS(AE_OK); } - -/******************************************************************************* - * - * FUNCTION: acpi_ev_gpe_initialize - * - * PARAMETERS: None - * - * RETURN: Status - * - * DESCRIPTION: Initialize the GPE data structures - * - ******************************************************************************/ - -acpi_status acpi_ev_gpe_initialize(void) -{ - u32 register_count0 = 0; - u32 register_count1 = 0; - u32 gpe_number_max = 0; - acpi_status status; - - ACPI_FUNCTION_TRACE(ev_gpe_initialize); - - status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* - * Initialize the GPE Block(s) defined in the FADT - * - * Why the GPE register block lengths are divided by 2: From the ACPI - * Spec, section "General-Purpose Event Registers", we have: - * - * "Each register block contains two registers of equal length - * GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the - * GPE0_STS and GPE0_EN registers is equal to half the GPE0_LEN - * The length of the GPE1_STS and GPE1_EN registers is equal to - * half the GPE1_LEN. If a generic register block is not supported - * then its respective block pointer and block length values in the - * FADT table contain zeros. The GPE0_LEN and GPE1_LEN do not need - * to be the same size." - */ - - /* - * Determine the maximum GPE number for this machine. - * - * Note: both GPE0 and GPE1 are optional, and either can exist without - * the other. - * - * If EITHER the register length OR the block address are zero, then that - * particular block is not supported. - */ - if (acpi_gbl_FADT.gpe0_block_length && - acpi_gbl_FADT.xgpe0_block.address) { - - /* GPE block 0 exists (has both length and address > 0) */ - - register_count0 = (u16) (acpi_gbl_FADT.gpe0_block_length / 2); - - gpe_number_max = - (register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1; - - /* Install GPE Block 0 */ - - status = acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device, - &acpi_gbl_FADT.xgpe0_block, - register_count0, 0, - acpi_gbl_FADT.sci_interrupt, - &acpi_gbl_gpe_fadt_blocks[0]); - - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "Could not create GPE Block 0")); - } - } - - if (acpi_gbl_FADT.gpe1_block_length && - acpi_gbl_FADT.xgpe1_block.address) { - - /* GPE block 1 exists (has both length and address > 0) */ - - register_count1 = (u16) (acpi_gbl_FADT.gpe1_block_length / 2); - - /* Check for GPE0/GPE1 overlap (if both banks exist) */ - - if ((register_count0) && - (gpe_number_max >= acpi_gbl_FADT.gpe1_base)) { - ACPI_ERROR((AE_INFO, - "GPE0 block (GPE 0 to %u) overlaps the GPE1 block " - "(GPE %u to %u) - Ignoring GPE1", - gpe_number_max, acpi_gbl_FADT.gpe1_base, - acpi_gbl_FADT.gpe1_base + - ((register_count1 * - ACPI_GPE_REGISTER_WIDTH) - 1))); - - /* Ignore GPE1 block by setting the register count to zero */ - - register_count1 = 0; - } else { - /* Install GPE Block 1 */ - - status = - acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device, - &acpi_gbl_FADT.xgpe1_block, - register_count1, - acpi_gbl_FADT.gpe1_base, - acpi_gbl_FADT. - sci_interrupt, - &acpi_gbl_gpe_fadt_blocks - [1]); - - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "Could not create GPE Block 1")); - } - - /* - * GPE0 and GPE1 do not have to be contiguous in the GPE number - * space. However, GPE0 always starts at GPE number zero. - */ - gpe_number_max = acpi_gbl_FADT.gpe1_base + - ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1); - } - } - - /* Exit if there are no GPE registers */ - - if ((register_count0 + register_count1) == 0) { - - /* GPEs are not required by ACPI, this is OK */ - - ACPI_DEBUG_PRINT((ACPI_DB_INIT, - "There are no GPE blocks defined in the FADT\n")); - status = AE_OK; - goto cleanup; - } - - /* Check for Max GPE number out-of-range */ - - if (gpe_number_max > ACPI_GPE_MAX) { - ACPI_ERROR((AE_INFO, - "Maximum GPE number from FADT is too large: 0x%X", - gpe_number_max)); - status = AE_BAD_VALUE; - goto cleanup; - } - - cleanup: - (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); - return_ACPI_STATUS(AE_OK); -} diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c new file mode 100644 index 0000000..3f6c2d2 --- /dev/null +++ b/drivers/acpi/acpica/evgpeinit.c @@ -0,0 +1,653 @@ +/****************************************************************************** + * + * Module Name: evgpeinit - System GPE initialization and update + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2010, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acevents.h" +#include "acnamesp.h" +#include "acinterp.h" + +#define _COMPONENT ACPI_EVENTS +ACPI_MODULE_NAME("evgpeinit") + +/******************************************************************************* + * + * FUNCTION: acpi_ev_gpe_initialize + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Initialize the GPE data structures and the FADT GPE 0/1 blocks + * + ******************************************************************************/ +acpi_status acpi_ev_gpe_initialize(void) +{ + u32 register_count0 = 0; + u32 register_count1 = 0; + u32 gpe_number_max = 0; + acpi_status status; + + ACPI_FUNCTION_TRACE(ev_gpe_initialize); + + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* + * Initialize the GPE Block(s) defined in the FADT + * + * Why the GPE register block lengths are divided by 2: From the ACPI + * Spec, section "General-Purpose Event Registers", we have: + * + * "Each register block contains two registers of equal length + * GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the + * GPE0_STS and GPE0_EN registers is equal to half the GPE0_LEN + * The length of the GPE1_STS and GPE1_EN registers is equal to + * half the GPE1_LEN. If a generic register block is not supported + * then its respective block pointer and block length values in the + * FADT table contain zeros. The GPE0_LEN and GPE1_LEN do not need + * to be the same size." + */ + + /* + * Determine the maximum GPE number for this machine. + * + * Note: both GPE0 and GPE1 are optional, and either can exist without + * the other. + * + * If EITHER the register length OR the block address are zero, then that + * particular block is not supported. + */ + if (acpi_gbl_FADT.gpe0_block_length && + acpi_gbl_FADT.xgpe0_block.address) { + + /* GPE block 0 exists (has both length and address > 0) */ + + register_count0 = (u16)(acpi_gbl_FADT.gpe0_block_length / 2); + + gpe_number_max = + (register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1; + + /* Install GPE Block 0 */ + + status = acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device, + &acpi_gbl_FADT.xgpe0_block, + register_count0, 0, + acpi_gbl_FADT.sci_interrupt, + &acpi_gbl_gpe_fadt_blocks[0]); + + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "Could not create GPE Block 0")); + } + } + + if (acpi_gbl_FADT.gpe1_block_length && + acpi_gbl_FADT.xgpe1_block.address) { + + /* GPE block 1 exists (has both length and address > 0) */ + + register_count1 = (u16)(acpi_gbl_FADT.gpe1_block_length / 2); + + /* Check for GPE0/GPE1 overlap (if both banks exist) */ + + if ((register_count0) && + (gpe_number_max >= acpi_gbl_FADT.gpe1_base)) { + ACPI_ERROR((AE_INFO, + "GPE0 block (GPE 0 to %u) overlaps the GPE1 block " + "(GPE %u to %u) - Ignoring GPE1", + gpe_number_max, acpi_gbl_FADT.gpe1_base, + acpi_gbl_FADT.gpe1_base + + ((register_count1 * + ACPI_GPE_REGISTER_WIDTH) - 1))); + + /* Ignore GPE1 block by setting the register count to zero */ + + register_count1 = 0; + } else { + /* Install GPE Block 1 */ + + status = + acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device, + &acpi_gbl_FADT.xgpe1_block, + register_count1, + acpi_gbl_FADT.gpe1_base, + acpi_gbl_FADT. + sci_interrupt, + &acpi_gbl_gpe_fadt_blocks + [1]); + + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "Could not create GPE Block 1")); + } + + /* + * GPE0 and GPE1 do not have to be contiguous in the GPE number + * space. However, GPE0 always starts at GPE number zero. + */ + gpe_number_max = acpi_gbl_FADT.gpe1_base + + ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1); + } + } + + /* Exit if there are no GPE registers */ + + if ((register_count0 + register_count1) == 0) { + + /* GPEs are not required by ACPI, this is OK */ + + ACPI_DEBUG_PRINT((ACPI_DB_INIT, + "There are no GPE blocks defined in the FADT\n")); + status = AE_OK; + goto cleanup; + } + + /* Check for Max GPE number out-of-range */ + + if (gpe_number_max > ACPI_GPE_MAX) { + ACPI_ERROR((AE_INFO, + "Maximum GPE number from FADT is too large: 0x%X", + gpe_number_max)); + status = AE_BAD_VALUE; + goto cleanup; + } + + cleanup: + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ev_update_gpes + * + * PARAMETERS: table_owner_id - ID of the newly-loaded ACPI table + * + * RETURN: None + * + * DESCRIPTION: Check for new GPE methods (_Lxx/_Exx) made available as a + * result of a Load() or load_table() operation. If new GPE + * methods have been installed, register the new methods and + * enable and runtime GPEs that are associated with them. Also, + * run any newly loaded _PRW methods in order to discover any + * new CAN_WAKE GPEs. + * + ******************************************************************************/ + +void acpi_ev_update_gpes(acpi_owner_id table_owner_id) +{ + struct acpi_gpe_xrupt_info *gpe_xrupt_info; + struct acpi_gpe_block_info *gpe_block; + struct acpi_gpe_walk_info walk_info; + acpi_status status = AE_OK; + u32 new_wake_gpe_count = 0; + + /* We will examine only _PRW/_Lxx/_Exx methods owned by this table */ + + walk_info.owner_id = table_owner_id; + walk_info.execute_by_owner_id = TRUE; + walk_info.count = 0; + + if (acpi_gbl_leave_wake_gpes_disabled) { + /* + * 1) Run any newly-loaded _PRW methods to find any GPEs that + * can now be marked as CAN_WAKE GPEs. Note: We must run the + * _PRW methods before we process the _Lxx/_Exx methods because + * we will enable all runtime GPEs associated with the new + * _Lxx/_Exx methods at the time we process those methods. + * + * Unlock interpreter so that we can run the _PRW methods. + */ + walk_info.gpe_block = NULL; + walk_info.gpe_device = NULL; + + acpi_ex_exit_interpreter(); + + status = + acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, + ACPI_NS_WALK_NO_UNLOCK, + acpi_ev_match_prw_and_gpe, NULL, + &walk_info, NULL); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "While executing _PRW methods")); + } + + acpi_ex_enter_interpreter(); + new_wake_gpe_count = walk_info.count; + } + + /* + * 2) Find any _Lxx/_Exx GPE methods that have just been loaded. + * + * Any GPEs that correspond to new _Lxx/_Exx methods and are not + * marked as CAN_WAKE are immediately enabled. + * + * Examine the namespace underneath each gpe_device within the + * gpe_block lists. + */ + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return; + } + + walk_info.count = 0; + walk_info.enable_this_gpe = TRUE; + + /* Walk the interrupt level descriptor list */ + + gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head; + while (gpe_xrupt_info) { + + /* Walk all Gpe Blocks attached to this interrupt level */ + + gpe_block = gpe_xrupt_info->gpe_block_list_head; + while (gpe_block) { + walk_info.gpe_block = gpe_block; + walk_info.gpe_device = gpe_block->node; + + status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD, + walk_info.gpe_device, + ACPI_UINT32_MAX, + ACPI_NS_WALK_NO_UNLOCK, + acpi_ev_match_gpe_method, + NULL, &walk_info, NULL); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "While decoding _Lxx/_Exx methods")); + } + + gpe_block = gpe_block->next; + } + + gpe_xrupt_info = gpe_xrupt_info->next; + } + + if (walk_info.count || new_wake_gpe_count) { + ACPI_INFO((AE_INFO, + "Enabled %u new runtime GPEs, added %u new wakeup GPEs", + walk_info.count, new_wake_gpe_count)); + } + + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ev_match_gpe_method + * + * PARAMETERS: Callback from walk_namespace + * + * RETURN: Status + * + * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a + * control method under the _GPE portion of the namespace. + * Extract the name and GPE type from the object, saving this + * information for quick lookup during GPE dispatch. Allows a + * per-owner_id evaluation if execute_by_owner_id is TRUE in the + * walk_info parameter block. + * + * The name of each GPE control method is of the form: + * "_Lxx" or "_Exx", where: + * L - means that the GPE is level triggered + * E - means that the GPE is edge triggered + * xx - is the GPE number [in HEX] + * + * If walk_info->execute_by_owner_id is TRUE, we only execute examine GPE methods + * with that owner. + * If walk_info->enable_this_gpe is TRUE, the GPE that is referred to by a GPE + * method is immediately enabled (Used for Load/load_table operators) + * + ******************************************************************************/ + +acpi_status +acpi_ev_match_gpe_method(acpi_handle obj_handle, + u32 level, void *context, void **return_value) +{ + struct acpi_namespace_node *method_node = + ACPI_CAST_PTR(struct acpi_namespace_node, obj_handle); + struct acpi_gpe_walk_info *walk_info = + ACPI_CAST_PTR(struct acpi_gpe_walk_info, context); + struct acpi_gpe_event_info *gpe_event_info; + struct acpi_namespace_node *gpe_device; + acpi_status status; + u32 gpe_number; + char name[ACPI_NAME_SIZE + 1]; + u8 type; + + ACPI_FUNCTION_TRACE(ev_match_gpe_method); + + /* Check if requested owner_id matches this owner_id */ + + if ((walk_info->execute_by_owner_id) && + (method_node->owner_id != walk_info->owner_id)) { + return_ACPI_STATUS(AE_OK); + } + + /* + * Match and decode the _Lxx and _Exx GPE method names + * + * 1) Extract the method name and null terminate it + */ + ACPI_MOVE_32_TO_32(name, &method_node->name.integer); + name[ACPI_NAME_SIZE] = 0; + + /* 2) Name must begin with an underscore */ + + if (name[0] != '_') { + return_ACPI_STATUS(AE_OK); /* Ignore this method */ + } + + /* + * 3) Edge/Level determination is based on the 2nd character + * of the method name + * + * NOTE: Default GPE type is RUNTIME only. Later, if a _PRW object is + * found that points to this GPE, the ACPI_GPE_CAN_WAKE flag is set. + */ + switch (name[1]) { + case 'L': + type = ACPI_GPE_LEVEL_TRIGGERED; + break; + + case 'E': + type = ACPI_GPE_EDGE_TRIGGERED; + break; + + default: + /* Unknown method type, just ignore it */ + + ACPI_DEBUG_PRINT((ACPI_DB_LOAD, + "Ignoring unknown GPE method type: %s " + "(name not of form _Lxx or _Exx)", name)); + return_ACPI_STATUS(AE_OK); + } + + /* 4) The last two characters of the name are the hex GPE Number */ + + gpe_number = ACPI_STRTOUL(&name[2], NULL, 16); + if (gpe_number == ACPI_UINT32_MAX) { + + /* Conversion failed; invalid method, just ignore it */ + + ACPI_DEBUG_PRINT((ACPI_DB_LOAD, + "Could not extract GPE number from name: %s " + "(name is not of form _Lxx or _Exx)", name)); + return_ACPI_STATUS(AE_OK); + } + + /* Ensure that we have a valid GPE number for this GPE block */ + + gpe_event_info = + acpi_ev_low_get_gpe_info(gpe_number, walk_info->gpe_block); + if (!gpe_event_info) { + /* + * This gpe_number is not valid for this GPE block, just ignore it. + * However, it may be valid for a different GPE block, since GPE0 + * and GPE1 methods both appear under \_GPE. + */ + return_ACPI_STATUS(AE_OK); + } + + if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == + ACPI_GPE_DISPATCH_HANDLER) { + + /* If there is already a handler, ignore this GPE method */ + + return_ACPI_STATUS(AE_OK); + } + + if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == + ACPI_GPE_DISPATCH_METHOD) { + /* + * If there is already a method, ignore this method. But check + * for a type mismatch (if both the _Lxx AND _Exx exist) + */ + if (type != (gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK)) { + ACPI_ERROR((AE_INFO, + "For GPE 0x%.2X, found both _L%2.2X and _E%2.2X methods", + gpe_number, gpe_number, gpe_number)); + } + return_ACPI_STATUS(AE_OK); + } + + /* + * Add the GPE information from above to the gpe_event_info block for + * use during dispatch of this GPE. + */ + gpe_event_info->flags |= (u8)(type | ACPI_GPE_DISPATCH_METHOD); + gpe_event_info->dispatch.method_node = method_node; + + /* + * Enable this GPE if requested. This only happens when during the + * execution of a Load or load_table operator. We have found a new + * GPE method and want to immediately enable the GPE if it is a + * runtime GPE. + */ + if (walk_info->enable_this_gpe) { + + /* Ignore GPEs that can wake the system */ + + if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE) || + !acpi_gbl_leave_wake_gpes_disabled) { + walk_info->count++; + gpe_device = walk_info->gpe_device; + + if (gpe_device == acpi_gbl_fadt_gpe_device) { + gpe_device = NULL; + } + + status = acpi_enable_gpe(gpe_device, gpe_number, + ACPI_GPE_TYPE_RUNTIME); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "Could not enable GPE 0x%02X", + gpe_number)); + } + } + } + + ACPI_DEBUG_PRINT((ACPI_DB_LOAD, + "Registered GPE method %s as GPE number 0x%.2X\n", + name, gpe_number)); + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ev_match_prw_and_gpe + * + * PARAMETERS: Callback from walk_namespace + * + * RETURN: Status. NOTE: We ignore errors so that the _PRW walk is + * not aborted on a single _PRW failure. + * + * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a + * Device. Run the _PRW method. If present, extract the GPE + * number and mark the GPE as a CAN_WAKE GPE. Allows a + * per-owner_id execution if execute_by_owner_id is TRUE in the + * walk_info parameter block. + * + * If walk_info->execute_by_owner_id is TRUE, we only execute _PRWs with that + * owner. + * If walk_info->gpe_device is NULL, we execute every _PRW found. Otherwise, + * we only execute _PRWs that refer to the input gpe_device. + * + ******************************************************************************/ + +acpi_status +acpi_ev_match_prw_and_gpe(acpi_handle obj_handle, + u32 level, void *context, void **return_value) +{ + struct acpi_gpe_walk_info *walk_info = + ACPI_CAST_PTR(struct acpi_gpe_walk_info, context); + struct acpi_namespace_node *gpe_device; + struct acpi_gpe_block_info *gpe_block; + struct acpi_namespace_node *target_gpe_device; + struct acpi_namespace_node *prw_node; + struct acpi_gpe_event_info *gpe_event_info; + union acpi_operand_object *pkg_desc; + union acpi_operand_object *obj_desc; + u32 gpe_number; + acpi_status status; + + ACPI_FUNCTION_TRACE(ev_match_prw_and_gpe); + + /* Check for a _PRW method under this device */ + + status = acpi_ns_get_node(obj_handle, METHOD_NAME__PRW, + ACPI_NS_NO_UPSEARCH, &prw_node); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(AE_OK); + } + + /* Check if requested owner_id matches this owner_id */ + + if ((walk_info->execute_by_owner_id) && + (prw_node->owner_id != walk_info->owner_id)) { + return_ACPI_STATUS(AE_OK); + } + + /* Execute the _PRW */ + + status = acpi_ut_evaluate_object(prw_node, NULL, + ACPI_BTYPE_PACKAGE, &pkg_desc); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(AE_OK); + } + + /* The returned _PRW package must have at least two elements */ + + if (pkg_desc->package.count < 2) { + goto cleanup; + } + + /* Extract pointers from the input context */ + + gpe_device = walk_info->gpe_device; + gpe_block = walk_info->gpe_block; + + /* + * The _PRW object must return a package, we are only interested + * in the first element + */ + obj_desc = pkg_desc->package.elements[0]; + + if (obj_desc->common.type == ACPI_TYPE_INTEGER) { + + /* Use FADT-defined GPE device (from definition of _PRW) */ + + target_gpe_device = NULL; + if (gpe_device) { + target_gpe_device = acpi_gbl_fadt_gpe_device; + } + + /* Integer is the GPE number in the FADT described GPE blocks */ + + gpe_number = (u32)obj_desc->integer.value; + } else if (obj_desc->common.type == ACPI_TYPE_PACKAGE) { + + /* Package contains a GPE reference and GPE number within a GPE block */ + + if ((obj_desc->package.count < 2) || + ((obj_desc->package.elements[0])->common.type != + ACPI_TYPE_LOCAL_REFERENCE) || + ((obj_desc->package.elements[1])->common.type != + ACPI_TYPE_INTEGER)) { + goto cleanup; + } + + /* Get GPE block reference and decode */ + + target_gpe_device = + obj_desc->package.elements[0]->reference.node; + gpe_number = (u32)obj_desc->package.elements[1]->integer.value; + } else { + /* Unknown type, just ignore it */ + + goto cleanup; + } + + /* Get the gpe_event_info for this GPE */ + + if (gpe_device) { + /* + * Is this GPE within this block? + * + * TRUE if and only if these conditions are true: + * 1) The GPE devices match. + * 2) The GPE index(number) is within the range of the Gpe Block + * associated with the GPE device. + */ + if (gpe_device != target_gpe_device) { + goto cleanup; + } + + gpe_event_info = + acpi_ev_low_get_gpe_info(gpe_number, gpe_block); + } else { + /* gpe_device is NULL, just match the target_device and gpe_number */ + + gpe_event_info = + acpi_ev_get_gpe_event_info(target_gpe_device, gpe_number); + } + + if (gpe_event_info) { + if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) { + + /* This GPE can wake the system */ + + gpe_event_info->flags |= ACPI_GPE_CAN_WAKE; + walk_info->count++; + } + } + + cleanup: + acpi_ut_remove_reference(pkg_desc); + return_ACPI_STATUS(AE_OK); +} diff --git a/drivers/acpi/acpica/evgpeutil.c b/drivers/acpi/acpica/evgpeutil.c new file mode 100644 index 0000000..19a0e51 --- /dev/null +++ b/drivers/acpi/acpica/evgpeutil.c @@ -0,0 +1,337 @@ +/****************************************************************************** + * + * Module Name: evgpeutil - GPE utilities + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2010, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acevents.h" + +#define _COMPONENT ACPI_EVENTS +ACPI_MODULE_NAME("evgpeutil") + +/******************************************************************************* + * + * FUNCTION: acpi_ev_walk_gpe_list + * + * PARAMETERS: gpe_walk_callback - Routine called for each GPE block + * Context - Value passed to callback + * + * RETURN: Status + * + * DESCRIPTION: Walk the GPE lists. + * + ******************************************************************************/ +acpi_status +acpi_ev_walk_gpe_list(acpi_gpe_callback gpe_walk_callback, void *context) +{ + struct acpi_gpe_block_info *gpe_block; + struct acpi_gpe_xrupt_info *gpe_xrupt_info; + acpi_status status = AE_OK; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(ev_walk_gpe_list); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* Walk the interrupt level descriptor list */ + + gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head; + while (gpe_xrupt_info) { + + /* Walk all Gpe Blocks attached to this interrupt level */ + + gpe_block = gpe_xrupt_info->gpe_block_list_head; + while (gpe_block) { + + /* One callback per GPE block */ + + status = + gpe_walk_callback(gpe_xrupt_info, gpe_block, + context); + if (ACPI_FAILURE(status)) { + if (status == AE_CTRL_END) { /* Callback abort */ + status = AE_OK; + } + goto unlock_and_exit; + } + + gpe_block = gpe_block->next; + } + + gpe_xrupt_info = gpe_xrupt_info->next; + } + + unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ev_valid_gpe_event + * + * PARAMETERS: gpe_event_info - Info for this GPE + * + * RETURN: TRUE if the gpe_event is valid + * + * DESCRIPTION: Validate a GPE event. DO NOT CALL FROM INTERRUPT LEVEL. + * Should be called only when the GPE lists are semaphore locked + * and not subject to change. + * + ******************************************************************************/ + +u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info) +{ + struct acpi_gpe_xrupt_info *gpe_xrupt_block; + struct acpi_gpe_block_info *gpe_block; + + ACPI_FUNCTION_ENTRY(); + + /* No need for spin lock since we are not changing any list elements */ + + /* Walk the GPE interrupt levels */ + + gpe_xrupt_block = acpi_gbl_gpe_xrupt_list_head; + while (gpe_xrupt_block) { + gpe_block = gpe_xrupt_block->gpe_block_list_head; + + /* Walk the GPE blocks on this interrupt level */ + + while (gpe_block) { + if ((&gpe_block->event_info[0] <= gpe_event_info) && + (&gpe_block->event_info[gpe_block->gpe_count] > + gpe_event_info)) { + return (TRUE); + } + + gpe_block = gpe_block->next; + } + + gpe_xrupt_block = gpe_xrupt_block->next; + } + + return (FALSE); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ev_get_gpe_xrupt_block + * + * PARAMETERS: interrupt_number - Interrupt for a GPE block + * + * RETURN: A GPE interrupt block + * + * DESCRIPTION: Get or Create a GPE interrupt block. There is one interrupt + * block per unique interrupt level used for GPEs. Should be + * called only when the GPE lists are semaphore locked and not + * subject to change. + * + ******************************************************************************/ + +struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32 interrupt_number) +{ + struct acpi_gpe_xrupt_info *next_gpe_xrupt; + struct acpi_gpe_xrupt_info *gpe_xrupt; + acpi_status status; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(ev_get_gpe_xrupt_block); + + /* No need for lock since we are not changing any list elements here */ + + next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head; + while (next_gpe_xrupt) { + if (next_gpe_xrupt->interrupt_number == interrupt_number) { + return_PTR(next_gpe_xrupt); + } + + next_gpe_xrupt = next_gpe_xrupt->next; + } + + /* Not found, must allocate a new xrupt descriptor */ + + gpe_xrupt = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_xrupt_info)); + if (!gpe_xrupt) { + return_PTR(NULL); + } + + gpe_xrupt->interrupt_number = interrupt_number; + + /* Install new interrupt descriptor with spin lock */ + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + if (acpi_gbl_gpe_xrupt_list_head) { + next_gpe_xrupt = acpi_gbl_gpe_xrupt_list_head; + while (next_gpe_xrupt->next) { + next_gpe_xrupt = next_gpe_xrupt->next; + } + + next_gpe_xrupt->next = gpe_xrupt; + gpe_xrupt->previous = next_gpe_xrupt; + } else { + acpi_gbl_gpe_xrupt_list_head = gpe_xrupt; + } + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + + /* Install new interrupt handler if not SCI_INT */ + + if (interrupt_number != acpi_gbl_FADT.sci_interrupt) { + status = acpi_os_install_interrupt_handler(interrupt_number, + acpi_ev_gpe_xrupt_handler, + gpe_xrupt); + if (ACPI_FAILURE(status)) { + ACPI_ERROR((AE_INFO, + "Could not install GPE interrupt handler at level 0x%X", + interrupt_number)); + return_PTR(NULL); + } + } + + return_PTR(gpe_xrupt); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ev_delete_gpe_xrupt + * + * PARAMETERS: gpe_xrupt - A GPE interrupt info block + * + * RETURN: Status + * + * DESCRIPTION: Remove and free a gpe_xrupt block. Remove an associated + * interrupt handler if not the SCI interrupt. + * + ******************************************************************************/ + +acpi_status acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt) +{ + acpi_status status; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(ev_delete_gpe_xrupt); + + /* We never want to remove the SCI interrupt handler */ + + if (gpe_xrupt->interrupt_number == acpi_gbl_FADT.sci_interrupt) { + gpe_xrupt->gpe_block_list_head = NULL; + return_ACPI_STATUS(AE_OK); + } + + /* Disable this interrupt */ + + status = + acpi_os_remove_interrupt_handler(gpe_xrupt->interrupt_number, + acpi_ev_gpe_xrupt_handler); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Unlink the interrupt block with lock */ + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + if (gpe_xrupt->previous) { + gpe_xrupt->previous->next = gpe_xrupt->next; + } else { + /* No previous, update list head */ + + acpi_gbl_gpe_xrupt_list_head = gpe_xrupt->next; + } + + if (gpe_xrupt->next) { + gpe_xrupt->next->previous = gpe_xrupt->previous; + } + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + + /* Free the block */ + + ACPI_FREE(gpe_xrupt); + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ev_delete_gpe_handlers + * + * PARAMETERS: gpe_xrupt_info - GPE Interrupt info + * gpe_block - Gpe Block info + * + * RETURN: Status + * + * DESCRIPTION: Delete all Handler objects found in the GPE data structs. + * Used only prior to termination. + * + ******************************************************************************/ + +acpi_status +acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, + struct acpi_gpe_block_info *gpe_block, + void *context) +{ + struct acpi_gpe_event_info *gpe_event_info; + u32 i; + u32 j; + + ACPI_FUNCTION_TRACE(ev_delete_gpe_handlers); + + /* Examine each GPE Register within the block */ + + for (i = 0; i < gpe_block->register_count; i++) { + + /* Now look at the individual GPEs in this byte register */ + + for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) { + gpe_event_info = &gpe_block->event_info[((acpi_size) i * + ACPI_GPE_REGISTER_WIDTH) + + j]; + + if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == + ACPI_GPE_DISPATCH_HANDLER) { + ACPI_FREE(gpe_event_info->dispatch.handler); + gpe_event_info->dispatch.handler = NULL; + gpe_event_info->flags &= + ~ACPI_GPE_DISPATCH_MASK; + } + } + } + + return_ACPI_STATUS(AE_OK); +} |
