summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/usb/gadget/at91_udc.c79
-rw-r--r--drivers/usb/gadget/at91_udc.h2
-rw-r--r--include/asm-arm/arch-at91/board.h3
3 files changed, 63 insertions, 21 deletions
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 305db36..a83e8b7 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -21,8 +21,7 @@
* Boston, MA 02111-1307, USA.
*/
-#undef DEBUG
-#undef VERBOSE
+#undef VERBOSE_DEBUG
#undef PACKET_TRACE
#include <linux/kernel.h>
@@ -46,8 +45,8 @@
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/mach-types.h>
+#include <asm/gpio.h>
-#include <asm/arch/gpio.h>
#include <asm/arch/board.h>
#include <asm/arch/cpu.h>
#include <asm/arch/at91sam9261_matrix.h>
@@ -580,7 +579,7 @@ static int at91_ep_disable (struct usb_ep * _ep)
*/
static struct usb_request *
-at91_ep_alloc_request(struct usb_ep *_ep, unsigned int gfp_flags)
+at91_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
{
struct at91_request *req;
@@ -881,6 +880,8 @@ static void clk_off(struct at91_udc *udc)
*/
static void pullup(struct at91_udc *udc, int is_on)
{
+ int active = !udc->board.pullup_active_low;
+
if (!udc->enabled || !udc->vbus)
is_on = 0;
DBG("%sactive\n", is_on ? "" : "in");
@@ -890,7 +891,7 @@ static void pullup(struct at91_udc *udc, int is_on)
at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM);
at91_udp_write(udc, AT91_UDP_TXVC, 0);
if (cpu_is_at91rm9200())
- at91_set_gpio_value(udc->board.pullup_pin, 1);
+ gpio_set_value(udc->board.pullup_pin, active);
else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
@@ -908,7 +909,7 @@ static void pullup(struct at91_udc *udc, int is_on)
at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM);
at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
if (cpu_is_at91rm9200())
- at91_set_gpio_value(udc->board.pullup_pin, 0);
+ gpio_set_value(udc->board.pullup_pin, !active);
else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
@@ -1551,7 +1552,7 @@ static irqreturn_t at91_vbus_irq(int irq, void *_udc)
/* vbus needs at least brief debouncing */
udelay(10);
- value = at91_get_gpio_value(udc->board.vbus_pin);
+ value = gpio_get_value(udc->board.vbus_pin);
if (value != udc->vbus)
at91_vbus_session(&udc->gadget, value);
@@ -1647,12 +1648,12 @@ static int __init at91udc_probe(struct platform_device *pdev)
}
if (pdev->num_resources != 2) {
- DBG("invalid num_resources");
+ DBG("invalid num_resources\n");
return -ENODEV;
}
if ((pdev->resource[0].flags != IORESOURCE_MEM)
|| (pdev->resource[1].flags != IORESOURCE_IRQ)) {
- DBG("invalid resource type");
+ DBG("invalid resource type\n");
return -ENODEV;
}
@@ -1674,10 +1675,26 @@ static int __init at91udc_probe(struct platform_device *pdev)
udc->pdev = pdev;
udc->enabled = 0;
+ /* rm9200 needs manual D+ pullup; off by default */
+ if (cpu_is_at91rm9200()) {
+ if (udc->board.pullup_pin <= 0) {
+ DBG("no D+ pullup?\n");
+ retval = -ENODEV;
+ goto fail0;
+ }
+ retval = gpio_request(udc->board.pullup_pin, "udc_pullup");
+ if (retval) {
+ DBG("D+ pullup is busy\n");
+ goto fail0;
+ }
+ gpio_direction_output(udc->board.pullup_pin,
+ udc->board.pullup_active_low);
+ }
+
udc->udp_baseaddr = ioremap(res->start, res->end - res->start + 1);
if (!udc->udp_baseaddr) {
- release_mem_region(res->start, res->end - res->start + 1);
- return -ENOMEM;
+ retval = -ENOMEM;
+ goto fail0a;
}
udc_reinit(udc);
@@ -1688,12 +1705,13 @@ static int __init at91udc_probe(struct platform_device *pdev)
if (IS_ERR(udc->iclk) || IS_ERR(udc->fclk)) {
DBG("clocks missing\n");
retval = -ENODEV;
- goto fail0;
+ /* NOTE: we "know" here that refcounts on these are NOPs */
+ goto fail0b;
}
retval = device_register(&udc->gadget.dev);
if (retval < 0)
- goto fail0;
+ goto fail0b;
/* don't do anything until we have both gadget driver and VBUS */
clk_enable(udc->iclk);
@@ -1705,25 +1723,32 @@ static int __init at91udc_probe(struct platform_device *pdev)
/* request UDC and maybe VBUS irqs */
udc->udp_irq = platform_get_irq(pdev, 0);
- if (request_irq(udc->udp_irq, at91_udc_irq,
- IRQF_DISABLED, driver_name, udc)) {
+ retval = request_irq(udc->udp_irq, at91_udc_irq,
+ IRQF_DISABLED, driver_name, udc);
+ if (retval < 0) {
DBG("request irq %d failed\n", udc->udp_irq);
- retval = -EBUSY;
goto fail1;
}
if (udc->board.vbus_pin > 0) {
+ retval = gpio_request(udc->board.vbus_pin, "udc_vbus");
+ if (retval < 0) {
+ DBG("request vbus pin failed\n");
+ goto fail2;
+ }
+ gpio_direction_input(udc->board.vbus_pin);
+
/*
* Get the initial state of VBUS - we cannot expect
* a pending interrupt.
*/
- udc->vbus = at91_get_gpio_value(udc->board.vbus_pin);
+ udc->vbus = gpio_get_value(udc->board.vbus_pin);
if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
IRQF_DISABLED, driver_name, udc)) {
DBG("request vbus irq %d failed\n",
udc->board.vbus_pin);
free_irq(udc->udp_irq, udc);
retval = -EBUSY;
- goto fail1;
+ goto fail3;
}
} else {
DBG("no VBUS detection, assuming always-on\n");
@@ -1736,8 +1761,18 @@ static int __init at91udc_probe(struct platform_device *pdev)
INFO("%s version %s\n", driver_name, DRIVER_VERSION);
return 0;
+fail3:
+ if (udc->board.vbus_pin > 0)
+ gpio_free(udc->board.vbus_pin);
+fail2:
+ free_irq(udc->udp_irq, udc);
fail1:
device_unregister(&udc->gadget.dev);
+fail0b:
+ iounmap(udc->udp_baseaddr);
+fail0a:
+ if (cpu_is_at91rm9200())
+ gpio_free(udc->board.pullup_pin);
fail0:
release_mem_region(res->start, res->end - res->start + 1);
DBG("%s probe failed, %d\n", driver_name, retval);
@@ -1758,12 +1793,18 @@ static int __exit at91udc_remove(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 0);
remove_debug_file(udc);
- if (udc->board.vbus_pin > 0)
+ if (udc->board.vbus_pin > 0) {
free_irq(udc->board.vbus_pin, udc);
+ gpio_free(udc->board.vbus_pin);
+ }
free_irq(udc->udp_irq, udc);
device_unregister(&udc->gadget.dev);
iounmap(udc->udp_baseaddr);
+
+ if (cpu_is_at91rm9200())
+ gpio_free(udc->board.pullup_pin);
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(res->start, res->end - res->start + 1);
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index f3095a9..a973f2a 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -158,7 +158,7 @@ struct at91_request {
/*-------------------------------------------------------------------------*/
-#ifdef VERBOSE
+#ifdef VERBOSE_DEBUG
# define VDBG DBG
#else
# define VDBG(stuff...) do{}while(0)
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
index 55b07bd..dc189f0 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -40,7 +40,8 @@
/* USB Device */
struct at91_udc_data {
u8 vbus_pin; /* high == host powering us */
- u8 pullup_pin; /* high == D+ pulled up */
+ u8 pullup_pin; /* active == D+ pulled up */
+ u8 pullup_active_low; /* true == pullup_pin is active low */
};
extern void __init at91_add_device_udc(struct at91_udc_data *data);
OpenPOWER on IntegriCloud