summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/scsi/sata_mv.c41
1 files changed, 23 insertions, 18 deletions
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index 2770005..33e3873 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -915,7 +915,7 @@ static void mv_fill_sg(struct ata_queued_cmd *qc)
pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff);
pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
- pp->sg_tbl[i].flags_size = cpu_to_le32(len);
+ pp->sg_tbl[i].flags_size = cpu_to_le32(len & 0xffff);
sg_len -= len;
addr += len;
@@ -1187,7 +1187,6 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
{
void __iomem *mmio = host_set->mmio_base;
void __iomem *hc_mmio = mv_hc_base(mmio, hc);
- struct ata_port *ap;
struct ata_queued_cmd *qc;
u32 hc_irq_cause;
int shift, port, port0, hard_port, handled;
@@ -1210,25 +1209,31 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
hc,relevant,hc_irq_cause);
for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) {
- ap = host_set->ports[port];
+ struct ata_port *ap = host_set->ports[port];
+ struct mv_port_priv *pp = ap->private_data;
hard_port = port & MV_PORT_MASK; /* range 0-3 */
handled = 0; /* ensure ata_status is set if handled++ */
- if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) {
- /* new CRPB on the queue; just one at a time until NCQ
- */
- ata_status = mv_get_crpb_status(ap);
- handled++;
- } else if ((DEV_IRQ << hard_port) & hc_irq_cause) {
- /* received ATA IRQ; read the status reg to clear INTRQ
- */
- ata_status = readb((void __iomem *)
+ /* Note that DEV_IRQ might happen spuriously during EDMA,
+ * and should be ignored in such cases. We could mask it,
+ * but it's pretty rare and may not be worth the overhead.
+ */
+ if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
+ /* EDMA: check for response queue interrupt */
+ if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) {
+ ata_status = mv_get_crpb_status(ap);
+ handled = 1;
+ }
+ } else {
+ /* PIO: check for device (drive) interrupt */
+ if ((DEV_IRQ << hard_port) & hc_irq_cause) {
+ ata_status = readb((void __iomem *)
ap->ioaddr.status_addr);
- handled++;
+ handled = 1;
+ }
}
- if (ap &&
- (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)))
+ if (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))
continue;
err_mask = ac_err_mask(ata_status);
@@ -1240,12 +1245,12 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
if ((PORT0_ERR << shift) & relevant) {
mv_err_intr(ap);
err_mask |= AC_ERR_OTHER;
- handled++;
+ handled = 1;
}
- if (handled && ap) {
+ if (handled) {
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (NULL != qc) {
+ if (qc && (qc->flags & ATA_QCFLAG_ACTIVE)) {
VPRINTK("port %u IRQ found for qc, "
"ata_status 0x%x\n", port,ata_status);
/* mark qc status appropriately */
OpenPOWER on IntegriCloud