764 files changed, 19234 insertions, 12588 deletions

diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt
index a8686e5..c6cd495 100644
--- a/Documentation/power/power_supply_class.txt
+++ b/Documentation/power/power_supply_class.txt
@@ -101,6 +101,10 @@ of charge when battery became full/empty". It also could mean "value of
 charge when battery considered full/empty at given conditions (temperature,
 age)". I.e. these attributes represents real thresholds, not design values.
 
+CHARGE_COUNTER - the current charge counter (in µAh).  This could easily
+be negative; there is no empty or full value.  It is only useful for
+relative, time-based measurements.
+
 ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
 
 CAPACITY - capacity in percents.
diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX
index 3be84aa..29d839c 100644
--- a/Documentation/powerpc/00-INDEX
+++ b/Documentation/powerpc/00-INDEX
@@ -20,8 +20,6 @@ mpc52xx-device-tree-bindings.txt
 	- MPC5200 Device Tree Bindings
 ppc_htab.txt
 	- info about the Linux/PPC /proc/ppc_htab entry
-SBC8260_memory_mapping.txt
-	- EST SBC8260 board info
 smp.txt
 	- use and state info about Linux/PPC on MP machines
 sound.txt
diff --git a/Documentation/powerpc/SBC8260_memory_mapping.txt b/Documentation/powerpc/SBC8260_memory_mapping.txt
deleted file mode 100644
index e6e9ee0..0000000
--- a/Documentation/powerpc/SBC8260_memory_mapping.txt
+++ /dev/null
@@ -1,197 +0,0 @@
-Please mail me (Jon Diekema, diekema_jon@si.com or diekema@cideas.com)
-if you have questions, comments or corrections.
-
-	* EST SBC8260 Linux memory mapping rules
-
-	http://www.estc.com/ 
-	http://www.estc.com/products/boards/SBC8260-8240_ds.html
-
-	Initial conditions:
-	-------------------
-	
-	Tasks that need to be perform by the boot ROM before control is
-	transferred to zImage (compressed Linux kernel):
-
-	- Define the IMMR to 0xf0000000
-
-	- Initialize the memory controller so that RAM is available at
-	  physical address 0x00000000.  On the SBC8260 is this 16M (64M)
-	  SDRAM.
-
-	- The boot ROM should only clear the RAM that it is using.
-
-	  The reason for doing this is to enhances the chances of a
-	  successful post mortem on a Linux panic.  One of the first
-	  items to examine is the 16k (LOG_BUF_LEN) circular console
-	  buffer called log_buf which is defined in kernel/printk.c.
-
-	- To enhance boot ROM performance, the I-cache can be enabled.
-
-	  Date: Mon, 22 May 2000 14:21:10 -0700
-	  From: Neil Russell <caret@c-side.com>
-
-	  LiMon (LInux MONitor) runs with and starts Linux with MMU
-	  off, I-cache enabled, D-cache disabled.  The I-cache doesn't
-	  need hints from the MMU to work correctly as the D-cache
-	  does.  No D-cache means no special code to handle devices in
-	  the presence of cache (no snooping, etc). The use of the
-	  I-cache means that the monitor can run acceptably fast
-	  directly from ROM, rather than having to copy it to RAM.
-
-	- Build the board information structure (see 
-	  include/asm-ppc/est8260.h for its definition)
-
-	- The compressed Linux kernel (zImage) contains a bootstrap loader 
-	  that is position independent; you can load it into any RAM, 
-	  ROM or FLASH memory address >= 0x00500000 (above 5 MB), or
-	  at its link address of 0x00400000 (4 MB).
-
-	  Note: If zImage is loaded at its link address of 0x00400000 (4 MB),
-	        then zImage will skip the step of moving itself to 
-		its link address.
-
-	- Load R3 with the address of the board information structure
-
-	- Transfer control to zImage
-
-	- The Linux console port is SMC1, and the baud rate is controlled
-	  from the bi_baudrate field of the board information structure.
-	  On thing to keep in mind when picking the baud rate, is that
-	  there is no flow control on the SMC ports.  I would stick
-	  with something safe and standard like 19200.
-
-	  On the EST SBC8260, the SMC1 port is on the COM1 connector of
-	  the board.
-
-	
-	EST SBC8260 defaults:
-	---------------------
-
-                                Chip
-        Memory                  Sel  Bus   Use
-        ---------------------   ---  ---   ----------------------------------
-	0x00000000-0x03FFFFFF   CS2  60x   (16M or 64M)/64M SDRAM
-	0x04000000-0x04FFFFFF   CS4  local  4M/16M SDRAM (soldered to the board)
-	0x21000000-0x21000000   CS7  60x    1B/64K Flash present detect (from the flash SIMM)
-	0x21000001-0x21000001   CS7  60x    1B/64K Switches (read) and LEDs (write)
-	0x22000000-0x2200FFFF   CS5  60x    8K/64K EEPROM
-	0xFC000000-0xFCFFFFFF   CS6  60x    2M/16M flash (8 bits wide, soldered to the board)
-	0xFE000000-0xFFFFFFFF   CS0  60x    4M/16M flash (SIMM)
-
-	Notes:
-	------
-
-	- The chip selects can map 32K blocks and up (powers of 2)
-
-	- The SDRAM machine can handled up to 128Mbytes per chip select
-
-	- Linux uses the 60x bus memory (the SDRAM DIMM) for the 
-	  communications buffers.
-
-	- BATs can map 128K-256Mbytes each.  There are four data BATs and
-	  four instruction BATs.  Generally the data and instruction BATs
-	  are mapped the same.
-
-	- The IMMR must be set above the kernel virtual memory addresses,
-	  which start at 0xC0000000.  Otherwise, the kernel may crash as
-	  soon as you start any threads or processes due to VM collisions 
-	  in the kernel or user process space.
-
-
-	  Details from Dan Malek <dan_malek@mvista.com> on 10/29/1999:
-
-	  The user application virtual space consumes the first 2 Gbytes
-	  (0x00000000 to 0x7FFFFFFF).  The kernel virtual text starts at
-	  0xC0000000, with data following.  There is a "protection hole"
-	  between the end of kernel data and the start of the kernel
-	  dynamically allocated space, but this space is still within
-	  0xCxxxxxxx.
-
-	  Obviously the kernel can't map any physical addresses 1:1 in
-	  these ranges.
-
-
-	  Details from Dan Malek <dan_malek@mvista.com> on 5/19/2000:
-
-	  During the early kernel initialization, the kernel virtual
-	  memory allocator is not operational.  Prior to this KVM
-	  initialization, we choose to map virtual to physical addresses
-	  1:1.  That is, the kernel virtual address exactly matches the
-	  physical address on the bus.  These mappings are typically done
-	  in arch/ppc/kernel/head.S, or arch/ppc/mm/init.c.  Only
-	  absolutely necessary mappings should be done at this time, for
-	  example board control registers or a serial uart.  Normal device
-	  driver initialization should map resources later when necessary.
-
-	  Although platform dependent, and certainly the case for embedded
-	  8xx, traditionally memory is mapped at physical address zero,
-	  and I/O devices above physical address 0x80000000.  The lowest
-	  and highest (above 0xf0000000) I/O addresses are traditionally 
-	  used for devices or registers we need to map during kernel 
-	  initialization and prior to KVM operation.  For this reason, 
-	  and since it followed prior PowerPC platform examples, I chose 
-	  to map the embedded 8xx kernel to the 0xc0000000 virtual address.
-	  This way, we can enable the MMU to map the kernel for proper 
-	  operation, and still map a few windows before the KVM is operational.
-
-	  On some systems, you could possibly run the kernel at the 
-	  0x80000000 or any other virtual address.  It just depends upon 
-	  mapping that must be done prior to KVM operational.  You can never 
-	  map devices or kernel spaces that overlap with the user virtual 
-	  space.  This is why default IMMR mapping used by most BDM tools 
-	  won't work.  They put the IMMR at something like 0x10000000 or 
-	  0x02000000 for example.  You simply can't map these addresses early
-	  in the kernel, and continue proper system operation.
-
-	  The embedded 8xx/82xx kernel is mature enough that all you should 
-	  need to do is map the IMMR someplace at or above 0xf0000000 and it 
-	  should boot far enough to get serial console messages and KGDB 
-	  connected on any platform.  There are lots of other subtle memory 
-	  management design features that you simply don't need to worry 
-	  about.  If you are changing functions related to MMU initialization,
-	  you are likely breaking things that are known to work and are 
-	  heading down a path of disaster and frustration.  Your changes 
-	  should be to make the flexibility of the processor fit Linux, 
-	  not force arbitrary and non-workable memory mappings into Linux.
-
-	- You don't want to change KERNELLOAD or KERNELBASE, otherwise the
-	  virtual memory and MMU code will get confused.
-	
-	  arch/ppc/Makefile:KERNELLOAD = 0xc0000000
-
-	  include/asm-ppc/page.h:#define PAGE_OFFSET    0xc0000000
-	  include/asm-ppc/page.h:#define KERNELBASE     PAGE_OFFSET
-
-	- RAM is at physical address 0x00000000, and gets mapped to 
-	  virtual address 0xC0000000 for the kernel.
-
-
-	Physical addresses used by the Linux kernel:
-	--------------------------------------------
-
-	0x00000000-0x3FFFFFFF   1GB reserved for RAM
-	0xF0000000-0xF001FFFF   128K IMMR  64K used for dual port memory,
-                                 64K for 8260 registers
-
-	
-        Logical addresses used by the Linux kernel:
-	-------------------------------------------
-
-	0xF0000000-0xFFFFFFFF   256M BAT0 (IMMR: dual port RAM, registers)
-	0xE0000000-0xEFFFFFFF   256M BAT1 (I/O space for custom boards)
-	0xC0000000-0xCFFFFFFF   256M BAT2 (RAM)
-	0xD0000000-0xDFFFFFFF   256M BAT3 (if RAM > 256MByte)
-
-
-	EST SBC8260 Linux mapping:
-	--------------------------
-
-	DBAT0, IBAT0, cache inhibited:
-
-                                Chip
-        Memory                  Sel  Use
-        ---------------------   ---  ---------------------------------
-        0xF0000000-0xF001FFFF   n/a  IMMR: dual port RAM, registers
-
-        DBAT1, IBAT1, cache inhibited:
-
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
index b35f348..2ea76d9 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt
@@ -7,6 +7,15 @@ Currently defined compatibles:
 - fsl,cpm2-scc-uart
 - fsl,qe-uart
 
+Modem control lines connected to GPIO controllers are listed in the gpios
+property as described in booting-without-of.txt, section IX.1 in the following
+order:
+
+CTS, RTS, DCD, DSR, DTR, and RI.
+
+The gpios property is optional and can be left out when control lines are
+not used.
+
 Example:
 
 	serial@11a00 {
@@ -18,4 +27,6 @@ Example:
 		interrupt-parent = <&PIC>;
 		fsl,cpm-brg = <1>;
 		fsl,cpm-command = <00800000>;
+		gpios = <&gpio_c 15 0
+			 &gpio_d 29 0>;
 	};
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index 0843ed0..28b6ec8 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -390,9 +390,10 @@ rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft
 rfkill input line is active.  Only if none of the rfkill input lines are
 active, will it return RFKILL_STATE_UNBLOCKED.
 
-If it doesn't implement the get_state() hook, it must make sure that its calls
-to rfkill_force_state() are enough to keep the status always up-to-date, and it
-must do a rfkill_force_state() on resume from sleep.
+Since the device has a hardware rfkill line, it IS subject to state changes
+external to rfkill.  Therefore, the driver must make sure that it calls
+rfkill_force_state() to keep the status always up-to-date, and it must do a
+rfkill_force_state() on resume from sleep.
 
 Every time the driver gets a notification from the card that one of its rfkill
 lines changed state (polling might be needed on badly designed cards that don't
@@ -422,13 +423,24 @@ of the hardware is unknown), or read-write (where the hardware can be queried
 about its current state).
 
 The rfkill class will call the get_state hook of a device every time it needs
-to know the *real* current state of the hardware.  This can happen often.
+to know the *real* current state of the hardware.  This can happen often, but
+it does not do any polling, so it is not enough on hardware that is subject
+to state changes outside of the rfkill subsystem.
+
+Therefore, calling rfkill_force_state() when a state change happens is
+mandatory when the device has a hardware rfkill line, or when something else
+like the firmware could cause its state to be changed without going through the
+rfkill class.
 
 Some hardware provides events when its status changes.  In these cases, it is
 best for the driver to not provide a get_state hook, and instead register the
 rfkill class *already* with the correct status, and keep it updated using
 rfkill_force_state() when it gets an event from the hardware.
 
+rfkill_force_state() must be used on the device resume handlers to update the
+rfkill status, should there be any chance of the device status changing during
+the sleep.
+
 There is no provision for a statically-allocated rfkill struct.  You must
 use rfkill_allocate() to allocate one.
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 42e7ed9..c65a5b9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3968,7 +3968,7 @@ M:	lethal@linux-sh.org
 L:	linux-sh@vger.kernel.org
 W:	http://www.linux-sh.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git
-S:	Maintained
+S:	Supported
 
 SUN3/3X
 P:	Sam Creasey
diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index c45fc7f..b0f6157 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -13,6 +13,7 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/sysctl.h>
 #include <linux/log2.h>
@@ -21,7 +22,8 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-unsigned int hpage_shift=HPAGE_SHIFT_DEFAULT;
+unsigned int hpage_shift = HPAGE_SHIFT_DEFAULT;
+EXPORT_SYMBOL(hpage_shift);
 
 pte_t *
 huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b4c4eaa..4da736e 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -3,6 +3,7 @@ config MIPS
 	default y
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_ARCH_KGDB
 	# Horrible source of confusion.  Die, die, die ...
 	select EMBEDDED
 	select RTC_LIB
@@ -34,7 +35,6 @@ config BASLER_EXCITE
 	select SYS_HAS_CPU_RM9000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	help
 	  The eXcite is a smart camera platform manufactured by
 	  Basler Vision Technologies AG.
@@ -280,7 +280,6 @@ config PMC_MSP
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	select IRQ_CPU
 	select SERIAL_8250
 	select SERIAL_8250_CONSOLE
@@ -306,7 +305,6 @@ config PMC_YOSEMITE
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_SMP
 	help
 	  Yosemite is an evaluation board for the RM9000x2 processor
@@ -359,7 +357,6 @@ config SGI_IP27
 	select SYS_HAS_CPU_R10000
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_SMP
 	select GENERIC_HARDIRQS_NO__DO_IRQ
@@ -475,7 +472,6 @@ config SIBYTE_SWARM
 	select SYS_HAS_CPU_SB1
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select ZONE_DMA32 if 64BIT
 
@@ -868,7 +864,6 @@ config SOC_PNX8550
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select GENERIC_HARDIRQS_NO__DO_IRQ
-	select SYS_SUPPORTS_KGDB
 	select GENERIC_GPIO
 
 config SWAP_IO_SPACE
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index f18cf92..765c8e2 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -34,28 +34,6 @@ config SMTC_IDLE_HOOK_DEBUG
 	  arch/mips/kernel/smtc.c.  This debugging option result in significant
 	  overhead so should be disabled in production kernels.
 
-config KGDB
-	bool "Remote GDB kernel debugging"
-	depends on DEBUG_KERNEL && SYS_SUPPORTS_KGDB
-	select DEBUG_INFO
-	help
-	  If you say Y here, it will be possible to remotely debug the MIPS
-	  kernel using gdb. This enlarges your kernel image disk size by
-	  several megabytes and requires a machine with more than 16 MB,
-	  better 32 MB RAM to avoid excessive linking time. This is only
-	  useful for kernel hackers. If unsure, say N.
-
-config SYS_SUPPORTS_KGDB
-	bool
-
-config GDB_CONSOLE
-	bool "Console output to GDB"
-	depends on KGDB
-	help
-	  If you are using GDB for remote debugging over a serial port and
-	  would like kernel messages to be formatted into GDB $O packets so
-	  that GDB prints them as program output, say 'Y'.
-
 config SB1XXX_CORELIS
 	bool "Corelis Debugger"
 	depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig
index 1fe97cc..e4a057d 100644
--- a/arch/mips/au1000/Kconfig
+++ b/arch/mips/au1000/Kconfig
@@ -134,4 +134,3 @@ config SOC_AU1X00
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_APM_EMULATION
-	select SYS_SUPPORTS_KGDB
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile
index dd0e19d..df48fd6 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/au1000/common/Makefile
@@ -9,7 +9,6 @@ obj-y += prom.o irq.o puts.o time.o reset.o \
 	au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
 	sleeper.o cputable.o dma.o dbdma.o gpio.o
 
-obj-$(CONFIG_KGDB)		+= dbg_io.o
 obj-$(CONFIG_PCI)		+= pci.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c
deleted file mode 100644
index af5be7d..0000000
--- a/arch/mips/au1000/common/dbg_io.c
+++ /dev/null
@@ -1,109 +0,0 @@
-#include <linux/types.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_KGDB
-
-/*
- * FIXME the user should be able to select the
- * uart to be used for debugging.
- */
-#define DEBUG_BASE  UART_DEBUG_BASE
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-
-#define UART_RX		0	/* Receive buffer */
-#define UART_TX		4	/* Transmit buffer */
-#define UART_IER	8	/* Interrupt Enable Register */
-#define UART_IIR	0xC	/* Interrupt ID Register */
-#define UART_FCR	0x10	/* FIFO Control Register */
-#define UART_LCR	0x14	/* Line Control Register */
-#define UART_MCR	0x18	/* Modem Control Register */
-#define UART_LSR	0x1C	/* Line Status Register */
-#define UART_MSR	0x20	/* Modem Status Register */
-#define UART_CLK	0x28	/* Baud Rat4e Clock Divider */
-#define UART_MOD_CNTRL	0x100	/* Module Control */
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y)     (au_readl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y))
-
-extern unsigned long calc_clock(void);
-
-void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
-{
-	if (UART16550_READ(UART_MOD_CNTRL) != 0x3)
-		UART16550_WRITE(UART_MOD_CNTRL, 3);
-	calc_clock();
-
-	/* disable interrupts */
-	UART16550_WRITE(UART_IER, 0);
-
-	/* set up baud rate */
-	{
-		u32 divisor;
-
-		/* set divisor */
-		divisor = get_au1x00_uart_baud_base() / baud;
-		UART16550_WRITE(UART_CLK, divisor & 0xffff);
-	}
-
-	/* set data format */
-	UART16550_WRITE(UART_LCR, (data | parity | stop));
-}
-
-static int remoteDebugInitialized;
-
-u8 getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_115200,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE,
-			  UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(UART_LSR) & 0x1) == 0);
-	return UART16550_READ(UART_RX);
-}
-
-
-int putDebugChar(u8 byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_115200,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE,
-			  UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(UART_LSR) & 0x40) == 0);
-	UART16550_WRITE(UART_TX, byte);
-
-	return 1;
-}
-
-#endif
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c
index 5ebe0de..8474135 100644
--- a/arch/mips/au1000/db1x00/init.c
+++ b/arch/mips/au1000/db1x00/init.c
@@ -57,6 +57,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index 33a4aeb..3bae13c 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -55,6 +55,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c
index 3837365..8a9c7d5 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/au1000/pb1000/init.c
@@ -52,6 +52,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c
index 8355483..7c67923 100644
--- a/arch/mips/au1000/pb1100/init.c
+++ b/arch/mips/au1000/pb1100/init.c
@@ -54,7 +54,7 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c
index 09fd63b..e9b2a0f 100644
--- a/arch/mips/au1000/pb1200/init.c
+++ b/arch/mips/au1000/pb1200/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x08000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c
index 49f51e1..3b6e395 100644
--- a/arch/mips/au1000/pb1500/init.c
+++ b/arch/mips/au1000/pb1500/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c
index 1b5f584..e1055a1 100644
--- a/arch/mips/au1000/pb1550/init.c
+++ b/arch/mips/au1000/pb1550/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x08000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c
index b849bf5..7516434 100644
--- a/arch/mips/au1000/xxs1500/init.c
+++ b/arch/mips/au1000/xxs1500/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile
index 519142c..cff29cf 100644
--- a/arch/mips/basler/excite/Makefile
+++ b/arch/mips/basler/excite/Makefile
@@ -5,5 +5,4 @@
 obj-$(CONFIG_BASLER_EXCITE)	+= excite_irq.o excite_prom.o excite_setup.o \
 				   excite_device.o excite_procfs.o
 
-obj-$(CONFIG_KGDB)		+= excite_dbg_io.o
 obj-m				+= excite_iodev.o
diff --git a/arch/mips/basler/excite/excite_dbg_io.c b/arch/mips/basler/excite/excite_dbg_io.c
deleted file mode 100644
index d289e3a..0000000
--- a/arch/mips/basler/excite/excite_dbg_io.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  Copyright (C) 2004 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/gdb-stub.h>
-#include <asm/rm9k-ocd.h>
-#include <excite.h>
-
-#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1
-#error Debug port used by serial driver
-#endif
-
-#define UART_CLK		25000000
-#define BASE_BAUD		(UART_CLK / 16)
-#define REGISTER_BASE_0		0x0208UL
-#define REGISTER_BASE_1		0x0238UL
-
-#define REGISTER_BASE_DBG	REGISTER_BASE_1
-
-#define CPRR	0x0004
-#define UACFG	0x0200
-#define UAINTS	0x0204
-#define UARBR	(REGISTER_BASE_DBG + 0x0000)
-#define UATHR	(REGISTER_BASE_DBG + 0x0004)
-#define UADLL	(REGISTER_BASE_DBG + 0x0008)
-#define UAIER	(REGISTER_BASE_DBG + 0x000c)
-#define UADLH	(REGISTER_BASE_DBG + 0x0010)
-#define UAIIR	(REGISTER_BASE_DBG + 0x0014)
-#define UAFCR	(REGISTER_BASE_DBG + 0x0018)
-#define UALCR	(REGISTER_BASE_DBG + 0x001c)
-#define UAMCR	(REGISTER_BASE_DBG + 0x0020)
-#define UALSR	(REGISTER_BASE_DBG + 0x0024)
-#define UAMSR	(REGISTER_BASE_DBG + 0x0028)
-#define UASCR	(REGISTER_BASE_DBG + 0x002c)
-
-#define	PARITY_NONE	0
-#define	PARITY_ODD	0x08
-#define	PARITY_EVEN	0x18
-#define	PARITY_MARK	0x28
-#define	PARITY_SPACE	0x38
-
-#define	DATA_5BIT	0x0
-#define	DATA_6BIT	0x1
-#define	DATA_7BIT	0x2
-#define	DATA_8BIT	0x3
-
-#define	STOP_1BIT	0x0
-#define	STOP_2BIT	0x4
-
-#define BAUD_DBG	57600
-#define	PARITY_DBG	PARITY_NONE
-#define	DATA_DBG	DATA_8BIT
-#define	STOP_DBG	STOP_1BIT
-
-/* Initialize the serial port for KGDB debugging */
-void __init excite_kgdb_init(void)
-{
-	const u32 divisor = BASE_BAUD / BAUD_DBG;
-
-	/* Take the UART out of reset */
-	titan_writel(0x00ff1cff, CPRR);
-	titan_writel(0x00000000, UACFG);
-	titan_writel(0x00000002, UACFG);
-
-	titan_writel(0x0, UALCR);
-	titan_writel(0x0, UAIER);
-
-	/* Disable FIFOs */
-	titan_writel(0x00, UAFCR);
-
-	titan_writel(0x80, UALCR);
-	titan_writel(divisor & 0xff, UADLL);
-	titan_writel((divisor & 0xff00) >> 8, UADLH);
-	titan_writel(0x0, UALCR);
-
-	titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR);
-
-	/* Enable receiver interrupt */
-	titan_readl(UARBR);
-	titan_writel(0x1, UAIER);
-}
-
-int getDebugChar(void)
-{
-	while (!(titan_readl(UALSR) & 0x1));
-	return titan_readl(UARBR);
-}
-
-int putDebugChar(int data)
-{
-	while (!(titan_readl(UALSR) & 0x20));
-	titan_writel(data, UATHR);
-	return 1;
-}
-
-/* KGDB interrupt handler */
-asmlinkage void excite_kgdb_inthdl(void)
-{
-	if (unlikely(
-		((titan_readl(UAIIR) & 0x7) == 4)
-		&& ((titan_readl(UARBR) & 0xff) == 0x3)))
-			set_async_breakpoint(&regs->cp0_epc);
-}
diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c
index 4903e06..934e0a6 100644
--- a/arch/mips/basler/excite/excite_irq.c
+++ b/arch/mips/basler/excite/excite_irq.c
@@ -50,10 +50,6 @@ void __init arch_init_irq(void)
 	mips_cpu_irq_init();
 	rm7k_cpu_irq_init();
 	rm9k_cpu_irq_init();
-
-#ifdef CONFIG_KGDB
-	excite_kgdb_init();
-#endif
 }
 
 asmlinkage void plat_irq_dispatch(void)
@@ -90,9 +86,6 @@ asmlinkage void plat_irq_dispatch(void)
 	msgint	    = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
 	if ((pending & (1 << TITAN_IRQ)) && msgint) {
 		ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
-#if defined(CONFIG_KGDB)
-		excite_kgdb_inthdl();
-#endif
 		do_IRQ(TITAN_IRQ);
 		return;
 	}
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
index 6dd8f0d..d66b3b8 100644
--- a/arch/mips/basler/excite/excite_setup.c
+++ b/arch/mips/basler/excite/excite_setup.c
@@ -95,13 +95,13 @@ static int __init excite_init_console(void)
 	/* Take the DUART out of reset */
 	titan_writel(0x00ff1cff, CPRR);
 
-#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1)
+#if (CONFIG_SERIAL_8250_NR_UARTS > 1)
 	/* Enable both ports */
 	titan_writel(MASK_SER0 | MASK_SER1, UACFG);
 #else
 	/* Enable port #0 only */
 	titan_writel(MASK_SER0, UACFG);
-#endif	/* defined(CONFIG_KGDB) */
+#endif
 
  	/*
 	 * Set up serial port #0. Do not use autodetection; the result is
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 2678b7e..eb44b72 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc5
-# Thu Sep  6 13:14:29 2007
+# Linux kernel version: 2.6.26
+# Fri Jul 25 10:25:34 2008
 #
 CONFIG_MIPS=y
 
@@ -10,9 +10,11 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
@@ -24,6 +26,7 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -34,19 +37,25 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_GT641XX=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
@@ -108,6 +117,7 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -115,10 +125,16 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -151,23 +167,28 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -177,23 +198,37 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -207,18 +242,18 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_I8253=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -232,8 +267,8 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
 
 #
 # Networking
@@ -250,6 +285,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -269,6 +305,7 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -276,8 +313,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -294,10 +329,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -305,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -326,9 +358,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -337,6 +372,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -350,6 +386,7 @@ CONFIG_MTD_BLKDEVS=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -384,6 +421,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x0
 CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -423,7 +461,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -462,10 +502,15 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -475,7 +520,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -504,7 +548,9 @@ CONFIG_ATA=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
@@ -518,29 +564,27 @@ CONFIG_ATA=y
 CONFIG_PATA_VIA=y
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -562,7 +606,12 @@ CONFIG_TULIP=y
 # CONFIG_DM9102 is not set
 # CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -572,6 +621,7 @@ CONFIG_TULIP=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -580,7 +630,6 @@ CONFIG_TULIP=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -588,7 +637,6 @@ CONFIG_TULIP=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -607,7 +655,6 @@ CONFIG_INPUT_POLLDEV=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -642,7 +689,9 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -664,65 +713,122 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-CONFIG_COBALT_LCD=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_COBALT=y
+# CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -743,6 +849,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -751,15 +858,18 @@ CONFIG_USB=m
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -773,6 +883,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -785,6 +896,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
@@ -793,6 +905,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -800,15 +913,11 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -833,16 +942,10 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -858,6 +961,8 @@ CONFIG_LEDS_COBALT_RAQ=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -882,9 +987,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -892,23 +998,7 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -923,22 +1013,22 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+CONFIG_EXT4DEV_FS_XATTR=y
+CONFIG_EXT4DEV_FS_POSIX_ACL=y
+CONFIG_EXT4DEV_FS_SECURITY=y
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -967,7 +1057,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=y
 
 #
@@ -983,32 +1072,28 @@ CONFIG_CONFIGFS_FS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1022,34 +1107,26 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
 
 #
@@ -1057,14 +1134,95 @@ CONFIG_CMDLINE=""
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index ebb8ad6..a279165 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index ad4e5ef..8944d15 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index d0dc2e8..ab17973 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -1174,7 +1174,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=48M"
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 9155082..b65803f 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -1392,7 +1392,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index e4e3244..a190ac0 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -1209,7 +1209,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
index 3572e80..4e465e9 100644
--- a/arch/mips/configs/excite_defconfig
+++ b/arch/mips/configs/excite_defconfig
@@ -1269,7 +1269,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 138c575..831d3e5 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -943,7 +943,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index 59d1947..dd13db4 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -1415,8 +1415,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 # CONFIG_MIPS_UNCACHED is not set
 
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index bacf0dd..db92726 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -3020,7 +3020,6 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 6dfe6f7..9e21e33 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -1085,7 +1085,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index c965a87..af67ed4 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -1202,7 +1202,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 0778996..7956f56 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -1195,7 +1195,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index 37c7b5f..723bd51 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -1216,10 +1216,8 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig
index 893e5c4..b5052fb 100644
--- a/arch/mips/configs/pnx8550-stb810_defconfig
+++ b/arch/mips/configs/pnx8550-stb810_defconfig
@@ -1206,10 +1206,8 @@ CONFIG_DEBUG_SLAB=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index e42aed5..c7c0864 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -742,7 +742,6 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 1ea9786..a9acaa2f 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -963,7 +963,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_SB1XXX_CORELIS is not set
 
 #
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index 7f86c43..ea8249c 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -827,8 +827,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma2rh/markeins/platform.c
index 1156770..d70627d 100644
--- a/arch/mips/emma2rh/markeins/platform.c
+++ b/arch/mips/emma2rh/markeins/platform.c
@@ -34,7 +34,6 @@
 #include <asm/bcache.h>
 #include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
 #include <asm/traps.h>
 #include <asm/debug.h>
 
diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c
index 62bfb45..a56c4b8 100644
--- a/arch/mips/emma2rh/markeins/setup.c
+++ b/arch/mips/emma2rh/markeins/setup.c
@@ -41,7 +41,6 @@
 #include <asm/bcache.h>
 #include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
 #include <asm/traps.h>
 #include <asm/debug.h>
 
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 0fd3197..706f939 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -71,7 +71,7 @@ obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o ptrace32.o signal32.o
 obj-$(CONFIG_MIPS32_N32)	+= binfmt_elfn32.o scall64-n32.o signal_n32.o
 obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo32.o scall64-o32.o
 
-obj-$(CONFIG_KGDB)		+= gdb-low.o gdb-stub.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_PROC_FS)		+= proc.o
 
 obj-$(CONFIG_64BIT)		+= cpu-bugs64.o
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
deleted file mode 100644
index 2c44606..0000000
--- a/arch/mips/kernel/gdb-low.S
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * gdb-low.S contains the low-level trap handler for the GDB stub.
- *
- * Copyright (C) 1995 Andreas Busse
- */
-#include <linux/sys.h>
-
-#include <asm/asm.h>
-#include <asm/errno.h>
-#include <asm/irqflags.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/gdb-stub.h>
-
-#ifdef CONFIG_32BIT
-#define DMFC0	mfc0
-#define DMTC0	mtc0
-#define LDC1	lwc1
-#define SDC1	lwc1
-#endif
-#ifdef CONFIG_64BIT
-#define DMFC0	dmfc0
-#define DMTC0	dmtc0
-#define LDC1	ldc1
-#define SDC1	ldc1
-#endif
-
-/*
- * [jsun] We reserves about 2x GDB_FR_SIZE in stack.  The lower (addressed)
- * part is used to store registers and passed to exception handler.
- * The upper part is reserved for "call func" feature where gdb client
- * saves some of the regs, setups call frame and passes args.
- *
- * A trace shows about 200 bytes are used to store about half of all regs.
- * The rest should be big enough for frame setup and passing args.
- */
-
-/*
- * The low level trap handler
- */
-		.align 	5
-		NESTED(trap_low, GDB_FR_SIZE, sp)
-		.set	noat
-		.set 	noreorder
-
-		mfc0	k0, CP0_STATUS
-		sll	k0, 3     		/* extract cu0 bit */
-		bltz	k0, 1f
-		move	k1, sp
-
-		/*
-		 * Called from user mode, go somewhere else.
-		 */
-		mfc0	k0, CP0_CAUSE
-		andi	k0, k0, 0x7c
-#ifdef CONFIG_64BIT
-		dsll	k0, k0, 1
-#endif
-		PTR_L	k1, saved_vectors(k0)
-		jr	k1
-		nop
-1:
-		move	k0, sp
-		PTR_SUBU sp, k1, GDB_FR_SIZE*2	# see comment above
-		LONG_S	k0, GDB_FR_REG29(sp)
-		LONG_S	$2, GDB_FR_REG2(sp)
-
-/*
- * First save the CP0 and special registers
- */
-
-		mfc0	v0, CP0_STATUS
-		LONG_S	v0, GDB_FR_STATUS(sp)
-		mfc0	v0, CP0_CAUSE
-		LONG_S	v0, GDB_FR_CAUSE(sp)
-		DMFC0	v0, CP0_EPC
-		LONG_S	v0, GDB_FR_EPC(sp)
-		DMFC0	v0, CP0_BADVADDR
-		LONG_S	v0, GDB_FR_BADVADDR(sp)
-		mfhi	v0
-		LONG_S	v0, GDB_FR_HI(sp)
-		mflo	v0
-		LONG_S	v0, GDB_FR_LO(sp)
-
-/*
- * Now the integer registers
- */
-
-		LONG_S	zero, GDB_FR_REG0(sp)		/* I know... */
-		LONG_S	$1, GDB_FR_REG1(sp)
-		/* v0 already saved */
-		LONG_S	$3, GDB_FR_REG3(sp)
-		LONG_S	$4, GDB_FR_REG4(sp)
-		LONG_S	$5, GDB_FR_REG5(sp)
-		LONG_S	$6, GDB_FR_REG6(sp)
-		LONG_S	$7, GDB_FR_REG7(sp)
-		LONG_S	$8, GDB_FR_REG8(sp)
-		LONG_S	$9, GDB_FR_REG9(sp)
-		LONG_S	$10, GDB_FR_REG10(sp)
-		LONG_S	$11, GDB_FR_REG11(sp)
-		LONG_S	$12, GDB_FR_REG12(sp)
-		LONG_S	$13, GDB_FR_REG13(sp)
-		LONG_S	$14, GDB_FR_REG14(sp)
-		LONG_S	$15, GDB_FR_REG15(sp)
-		LONG_S	$16, GDB_FR_REG16(sp)
-		LONG_S	$17, GDB_FR_REG17(sp)
-		LONG_S	$18, GDB_FR_REG18(sp)
-		LONG_S	$19, GDB_FR_REG19(sp)
-		LONG_S	$20, GDB_FR_REG20(sp)
-		LONG_S	$21, GDB_FR_REG21(sp)
-		LONG_S	$22, GDB_FR_REG22(sp)
-		LONG_S	$23, GDB_FR_REG23(sp)
-		LONG_S	$24, GDB_FR_REG24(sp)
-		LONG_S	$25, GDB_FR_REG25(sp)
-		LONG_S	$26, GDB_FR_REG26(sp)
-		LONG_S	$27, GDB_FR_REG27(sp)
-		LONG_S	$28, GDB_FR_REG28(sp)
-		/* sp already saved */
-		LONG_S	$30, GDB_FR_REG30(sp)
-		LONG_S	$31, GDB_FR_REG31(sp)
-
-		CLI				/* disable interrupts */
-		TRACE_IRQS_OFF
-
-/*
- * Followed by the floating point registers
- */
-		mfc0	v0, CP0_STATUS		/* FPU enabled? */
-		srl	v0, v0, 16
-		andi	v0, v0, (ST0_CU1 >> 16)
-
-		beqz	v0,2f			/* disabled, skip */
-		 nop
-
-		SDC1	$0, GDB_FR_FPR0(sp)
-		SDC1	$1, GDB_FR_FPR1(sp)
-		SDC1	$2, GDB_FR_FPR2(sp)
-		SDC1	$3, GDB_FR_FPR3(sp)
-		SDC1	$4, GDB_FR_FPR4(sp)
-		SDC1	$5, GDB_FR_FPR5(sp)
-		SDC1	$6, GDB_FR_FPR6(sp)
-		SDC1	$7, GDB_FR_FPR7(sp)
-		SDC1	$8, GDB_FR_FPR8(sp)
-		SDC1	$9, GDB_FR_FPR9(sp)
-		SDC1	$10, GDB_FR_FPR10(sp)
-		SDC1	$11, GDB_FR_FPR11(sp)
-		SDC1	$12, GDB_FR_FPR12(sp)
-		SDC1	$13, GDB_FR_FPR13(sp)
-		SDC1	$14, GDB_FR_FPR14(sp)
-		SDC1	$15, GDB_FR_FPR15(sp)
-		SDC1	$16, GDB_FR_FPR16(sp)
-		SDC1	$17, GDB_FR_FPR17(sp)
-		SDC1	$18, GDB_FR_FPR18(sp)
-		SDC1	$19, GDB_FR_FPR19(sp)
-		SDC1	$20, GDB_FR_FPR20(sp)
-		SDC1	$21, GDB_FR_FPR21(sp)
-		SDC1	$22, GDB_FR_FPR22(sp)
-		SDC1	$23, GDB_FR_FPR23(sp)
-		SDC1	$24, GDB_FR_FPR24(sp)
-		SDC1	$25, GDB_FR_FPR25(sp)
-		SDC1	$26, GDB_FR_FPR26(sp)
-		SDC1	$27, GDB_FR_FPR27(sp)
-		SDC1	$28, GDB_FR_FPR28(sp)
-		SDC1	$29, GDB_FR_FPR29(sp)
-		SDC1	$30, GDB_FR_FPR30(sp)
-		SDC1	$31, GDB_FR_FPR31(sp)
-
-/*
- * FPU control registers
- */
-
-		cfc1	v0, CP1_STATUS
-		LONG_S	v0, GDB_FR_FSR(sp)
-		cfc1	v0, CP1_REVISION
-		LONG_S	v0, GDB_FR_FIR(sp)
-
-/*
- * Current stack frame ptr
- */
-
-2:
-		LONG_S	sp, GDB_FR_FRP(sp)
-
-/*
- * CP0 registers (R4000/R4400 unused registers skipped)
- */
-
-		mfc0	v0, CP0_INDEX
-		LONG_S	v0, GDB_FR_CP0_INDEX(sp)
-		mfc0	v0, CP0_RANDOM
-		LONG_S	v0, GDB_FR_CP0_RANDOM(sp)
-		DMFC0	v0, CP0_ENTRYLO0
-		LONG_S	v0, GDB_FR_CP0_ENTRYLO0(sp)
-		DMFC0	v0, CP0_ENTRYLO1
-		LONG_S	v0, GDB_FR_CP0_ENTRYLO1(sp)
-		DMFC0	v0, CP0_CONTEXT
-		LONG_S	v0, GDB_FR_CP0_CONTEXT(sp)
-		mfc0	v0, CP0_PAGEMASK
-		LONG_S	v0, GDB_FR_CP0_PAGEMASK(sp)
-		mfc0	v0, CP0_WIRED
-		LONG_S	v0, GDB_FR_CP0_WIRED(sp)
-		DMFC0	v0, CP0_ENTRYHI
-		LONG_S	v0, GDB_FR_CP0_ENTRYHI(sp)
-		mfc0	v0, CP0_PRID
-		LONG_S	v0, GDB_FR_CP0_PRID(sp)
-
-		.set	at
-
-/*
- * Continue with the higher level handler
- */
-
-		move	a0,sp
-
-		jal	handle_exception
-		 nop
-
-/*
- * Restore all writable registers, in reverse order
- */
-
-		.set	noat
-
-		LONG_L	v0, GDB_FR_CP0_ENTRYHI(sp)
-		LONG_L	v1, GDB_FR_CP0_WIRED(sp)
-		DMTC0	v0, CP0_ENTRYHI
-		mtc0	v1, CP0_WIRED
-		LONG_L	v0, GDB_FR_CP0_PAGEMASK(sp)
-		LONG_L	v1, GDB_FR_CP0_ENTRYLO1(sp)
-		mtc0	v0, CP0_PAGEMASK
-		DMTC0	v1, CP0_ENTRYLO1
-		LONG_L	v0, GDB_FR_CP0_ENTRYLO0(sp)
-		LONG_L	v1, GDB_FR_CP0_INDEX(sp)
-		DMTC0	v0, CP0_ENTRYLO0
-		LONG_L	v0, GDB_FR_CP0_CONTEXT(sp)
-		mtc0	v1, CP0_INDEX
-		DMTC0	v0, CP0_CONTEXT
-
-
-/*
- * Next, the floating point registers
- */
-		mfc0	v0, CP0_STATUS		/* check if the FPU is enabled */
-		srl	v0, v0, 16
-		andi	v0, v0, (ST0_CU1 >> 16)
-
-		beqz	v0, 3f			/* disabled, skip */
-		 nop
-
-		LDC1	$31, GDB_FR_FPR31(sp)
-		LDC1	$30, GDB_FR_FPR30(sp)
-		LDC1	$29, GDB_FR_FPR29(sp)
-		LDC1	$28, GDB_FR_FPR28(sp)
-		LDC1	$27, GDB_FR_FPR27(sp)
-		LDC1	$26, GDB_FR_FPR26(sp)
-		LDC1	$25, GDB_FR_FPR25(sp)
-		LDC1	$24, GDB_FR_FPR24(sp)
-		LDC1	$23, GDB_FR_FPR23(sp)
-		LDC1	$22, GDB_FR_FPR22(sp)
-		LDC1	$21, GDB_FR_FPR21(sp)
-		LDC1	$20, GDB_FR_FPR20(sp)
-		LDC1	$19, GDB_FR_FPR19(sp)
-		LDC1	$18, GDB_FR_FPR18(sp)
-		LDC1	$17, GDB_FR_FPR17(sp)
-		LDC1	$16, GDB_FR_FPR16(sp)
-		LDC1	$15, GDB_FR_FPR15(sp)
-		LDC1	$14, GDB_FR_FPR14(sp)
-		LDC1	$13, GDB_FR_FPR13(sp)
-		LDC1	$12, GDB_FR_FPR12(sp)
-		LDC1	$11, GDB_FR_FPR11(sp)
-		LDC1	$10, GDB_FR_FPR10(sp)
-		LDC1	$9, GDB_FR_FPR9(sp)
-		LDC1	$8, GDB_FR_FPR8(sp)
-		LDC1	$7, GDB_FR_FPR7(sp)
-		LDC1	$6, GDB_FR_FPR6(sp)
-		LDC1	$5, GDB_FR_FPR5(sp)
-		LDC1	$4, GDB_FR_FPR4(sp)
-		LDC1	$3, GDB_FR_FPR3(sp)
-		LDC1	$2, GDB_FR_FPR2(sp)
-		LDC1	$1, GDB_FR_FPR1(sp)
-		LDC1	$0, GDB_FR_FPR0(sp)
-
-/*
- * Now the CP0 and integer registers
- */
-
-3:
-#ifdef CONFIG_MIPS_MT_SMTC
-		/* Read-modify write of Status must be atomic */
-		mfc0	t2, CP0_TCSTATUS
-		ori	t1, t2, TCSTATUS_IXMT
-		mtc0	t1, CP0_TCSTATUS
-		andi	t2, t2, TCSTATUS_IXMT
-		_ehb
-		DMT	9				# dmt	t1
-		jal	mips_ihb
-		nop
-#endif /* CONFIG_MIPS_MT_SMTC */
-		mfc0	t0, CP0_STATUS
-		ori	t0, 0x1f
-		xori	t0, 0x1f
-		mtc0	t0, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
-        	andi    t1, t1, VPECONTROL_TE
-        	beqz    t1, 9f
-		nop
-        	EMT					# emt
-9:
-		mfc0	t1, CP0_TCSTATUS
-		xori	t1, t1, TCSTATUS_IXMT
-		or	t1, t1, t2
-		mtc0	t1, CP0_TCSTATUS
-		_ehb
-#endif /* CONFIG_MIPS_MT_SMTC */
-		LONG_L	v0, GDB_FR_STATUS(sp)
-		LONG_L	v1, GDB_FR_EPC(sp)
-		mtc0	v0, CP0_STATUS
-		DMTC0	v1, CP0_EPC
-		LONG_L	v0, GDB_FR_HI(sp)
-		LONG_L	v1, GDB_FR_LO(sp)
-		mthi	v0
-		mtlo	v1
-		LONG_L	$31, GDB_FR_REG31(sp)
-		LONG_L	$30, GDB_FR_REG30(sp)
-		LONG_L	$28, GDB_FR_REG28(sp)
-		LONG_L	$27, GDB_FR_REG27(sp)
-		LONG_L	$26, GDB_FR_REG26(sp)
-		LONG_L	$25, GDB_FR_REG25(sp)
-		LONG_L	$24, GDB_FR_REG24(sp)
-		LONG_L	$23, GDB_FR_REG23(sp)
-		LONG_L	$22, GDB_FR_REG22(sp)
-		LONG_L	$21, GDB_FR_REG21(sp)
-		LONG_L	$20, GDB_FR_REG20(sp)
-		LONG_L	$19, GDB_FR_REG19(sp)
-		LONG_L	$18, GDB_FR_REG18(sp)
-		LONG_L	$17, GDB_FR_REG17(sp)
-		LONG_L	$16, GDB_FR_REG16(sp)
-		LONG_L	$15, GDB_FR_REG15(sp)
-		LONG_L	$14, GDB_FR_REG14(sp)
-		LONG_L	$13, GDB_FR_REG13(sp)
-		LONG_L	$12, GDB_FR_REG12(sp)
-		LONG_L	$11, GDB_FR_REG11(sp)
-		LONG_L	$10, GDB_FR_REG10(sp)
-		LONG_L	$9, GDB_FR_REG9(sp)
-		LONG_L	$8, GDB_FR_REG8(sp)
-		LONG_L	$7, GDB_FR_REG7(sp)
-		LONG_L	$6, GDB_FR_REG6(sp)
-		LONG_L	$5, GDB_FR_REG5(sp)
-		LONG_L	$4, GDB_FR_REG4(sp)
-		LONG_L	$3, GDB_FR_REG3(sp)
-		LONG_L	$2, GDB_FR_REG2(sp)
-		LONG_L	$1, GDB_FR_REG1(sp)
-#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
-		LONG_L	k0, GDB_FR_EPC(sp)
-		LONG_L	$29, GDB_FR_REG29(sp)		/* Deallocate stack */
-		jr	k0
-		rfe
-#else
-		LONG_L	sp, GDB_FR_REG29(sp)		/* Deallocate stack */
-
-		.set	mips3
-		eret
-		.set	mips0
-#endif
-		.set	at
-		.set	reorder
-		END(trap_low)
-
-LEAF(kgdb_read_byte)
-4:		lb	t0, (a0)
-		sb	t0, (a1)
-		li	v0, 0
-		jr	ra
-		.section __ex_table,"a"
-		PTR	4b, kgdbfault
-		.previous
-		END(kgdb_read_byte)
-
-LEAF(kgdb_write_byte)
-5:		sb	a0, (a1)
-		li	v0, 0
-		jr	ra
-		.section __ex_table,"a"
-		PTR	5b, kgdbfault
-		.previous
-		END(kgdb_write_byte)
-
-		.type	kgdbfault@function
-		.ent	kgdbfault
-
-kgdbfault:	li	v0, -EFAULT
-		jr	ra
-		.end	kgdbfault
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
deleted file mode 100644
index 25f4eab..0000000
--- a/arch/mips/kernel/gdb-stub.c
+++ /dev/null
@@ -1,1155 +0,0 @@
-/*
- *  arch/mips/kernel/gdb-stub.c
- *
- *  Originally written by Glenn Engel, Lake Stevens Instrument Division
- *
- *  Contributed by HP Systems
- *
- *  Modified for SPARC by Stu Grossman, Cygnus Support.
- *
- *  Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
- *  Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
- *
- *  Copyright (C) 1995 Andreas Busse
- *
- *  Copyright (C) 2003 MontaVista Software Inc.
- *  Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- */
-
-/*
- *  To enable debugger support, two things need to happen.  One, a
- *  call to set_debug_traps() is necessary in order to allow any breakpoints
- *  or error conditions to be properly intercepted and reported to gdb.
- *  Two, a breakpoint needs to be generated to begin communication.  This
- *  is most easily accomplished by a call to breakpoint().  Breakpoint()
- *  simulates a breakpoint by executing a BREAK instruction.
- *
- *
- *    The following gdb commands are supported:
- *
- * command          function                               Return value
- *
- *    g             return the value of the CPU registers  hex data or ENN
- *    G             set the value of the CPU registers     OK or ENN
- *
- *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
- *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
- *
- *    c             Resume at current address              SNN   ( signal NN)
- *    cAA..AA       Continue at address AA..AA             SNN
- *
- *    s             Step one instruction                   SNN
- *    sAA..AA       Step one instruction from AA..AA       SNN
- *
- *    k             kill
- *
- *    ?             What was the last sigval ?             SNN   (signal NN)
- *
- *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
- *							   baud rate
- *
- * All commands and responses are sent with a packet which includes a
- * checksum.  A packet consists of
- *
- * $<packet info>#<checksum>.
- *
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
- *
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer.  '-' indicates a failed transfer.
- *
- * Example:
- *
- * Host:                  Reply:
- * $m0,10#2a               +$00010203040506070809101112131415#42
- *
- *
- *  ==============
- *  MORE EXAMPLES:
- *  ==============
- *
- *  For reference -- the following are the steps that one
- *  company took (RidgeRun Inc) to get remote gdb debugging
- *  going. In this scenario the host machine was a PC and the
- *  target platform was a Galileo EVB64120A MIPS evaluation
- *  board.
- *
- *  Step 1:
- *  First download gdb-5.0.tar.gz from the internet.
- *  and then build/install the package.
- *
- *  Example:
- *    $ tar zxf gdb-5.0.tar.gz
- *    $ cd gdb-5.0
- *    $ ./configure --target=mips-linux-elf
- *    $ make
- *    $ install
- *    $ which mips-linux-elf-gdb
- *    /usr/local/bin/mips-linux-elf-gdb
- *
- *  Step 2:
- *  Configure linux for remote debugging and build it.
- *
- *  Example:
- *    $ cd ~/linux
- *    $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
- *    $ make
- *
- *  Step 3:
- *  Download the kernel to the remote target and start
- *  the kernel running. It will promptly halt and wait
- *  for the host gdb session to connect. It does this
- *  since the "Kernel Hacking" option has defined
- *  CONFIG_KGDB which in turn enables your calls
- *  to:
- *     set_debug_traps();
- *     breakpoint();
- *
- *  Step 4:
- *  Start the gdb session on the host.
- *
- *  Example:
- *    $ mips-linux-elf-gdb vmlinux
- *    (gdb) set remotebaud 115200
- *    (gdb) target remote /dev/ttyS1
- *    ...at this point you are connected to
- *       the remote target and can use gdb
- *       in the normal fasion. Setting
- *       breakpoints, single stepping,
- *       printing variables, etc.
- */
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/reboot.h>
-
-#include <asm/asm.h>
-#include <asm/cacheflush.h>
-#include <asm/mipsregs.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/gdb-stub.h>
-#include <asm/inst.h>
-
-/*
- * external low-level support routines
- */
-
-extern int putDebugChar(char c);    /* write a single character      */
-extern char getDebugChar(void);     /* read and return a single char */
-extern void trap_low(void);
-
-/*
- * breakpoint and test functions
- */
-extern void breakpoint(void);
-extern void breakinst(void);
-extern void async_breakpoint(void);
-extern void async_breakinst(void);
-extern void adel(void);
-
-/*
- * local prototypes
- */
-
-static void getpacket(char *buffer);
-static void putpacket(char *buffer);
-static int computeSignal(int tt);
-static int hex(unsigned char ch);
-static int hexToInt(char **ptr, int *intValue);
-static int hexToLong(char **ptr, long *longValue);
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault);
-void handle_exception(struct gdb_regs *regs);
-
-int kgdb_enabled;
-
-/*
- * spin locks for smp case
- */
-static DEFINE_SPINLOCK(kgdb_lock);
-static raw_spinlock_t kgdb_cpulock[NR_CPUS] = {
-	[0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED,
-};
-
-/*
- * BUFMAX defines the maximum number of characters in inbound/outbound buffers
- * at least NUMREGBYTES*2 are needed for register packets
- */
-#define BUFMAX 2048
-
-static char input_buffer[BUFMAX];
-static char output_buffer[BUFMAX];
-static int initialized;	/* !0 means we've been initialized */
-static int kgdb_started;
-static const char hexchars[]="0123456789abcdef";
-
-/* Used to prevent crashes in memory access.  Note that they'll crash anyway if
-   we haven't set up fault handlers yet... */
-int kgdb_read_byte(unsigned char *address, unsigned char *dest);
-int kgdb_write_byte(unsigned char val, unsigned char *dest);
-
-/*
- * Convert ch from a hex digit to an int
- */
-static int hex(unsigned char ch)
-{
-	if (ch >= 'a' && ch <= 'f')
-		return ch-'a'+10;
-	if (ch >= '0' && ch <= '9')
-		return ch-'0';
-	if (ch >= 'A' && ch <= 'F')
-		return ch-'A'+10;
-	return -1;
-}
-
-/*
- * scan for the sequence $<data>#<checksum>
- */
-static void getpacket(char *buffer)
-{
-	unsigned char checksum;
-	unsigned char xmitcsum;
-	int i;
-	int count;
-	unsigned char ch;
-
-	do {
-		/*
-		 * wait around for the start character,
-		 * ignore all other characters
-		 */
-		while ((ch = (getDebugChar() & 0x7f)) != '$') ;
-
-		checksum = 0;
-		xmitcsum = -1;
-		count = 0;
-
-		/*
-		 * now, read until a # or end of buffer is found
-		 */
-		while (count < BUFMAX) {
-			ch = getDebugChar();
-			if (ch == '#')
-				break;
-			checksum = checksum + ch;
-			buffer[count] = ch;
-			count = count + 1;
-		}
-
-		if (count >= BUFMAX)
-			continue;
-
-		buffer[count] = 0;
-
-		if (ch == '#') {
-			xmitcsum = hex(getDebugChar() & 0x7f) << 4;
-			xmitcsum |= hex(getDebugChar() & 0x7f);
-
-			if (checksum != xmitcsum)
-				putDebugChar('-');	/* failed checksum */
-			else {
-				putDebugChar('+'); /* successful transfer */
-
-				/*
-				 * if a sequence char is present,
-				 * reply the sequence ID
-				 */
-				if (buffer[2] == ':') {
-					putDebugChar(buffer[0]);
-					putDebugChar(buffer[1]);
-
-					/*
-					 * remove sequence chars from buffer
-					 */
-					count = strlen(buffer);
-					for (i=3; i <= count; i++)
-						buffer[i-3] = buffer[i];
-				}
-			}
-		}
-	}
-	while (checksum != xmitcsum);
-}
-
-/*
- * send the packet in buffer.
- */
-static void putpacket(char *buffer)
-{
-	unsigned char checksum;
-	int count;
-	unsigned char ch;
-
-	/*
-	 * $<packet info>#<checksum>.
-	 */
-
-	do {
-		putDebugChar('$');
-		checksum = 0;
-		count = 0;
-
-		while ((ch = buffer[count]) != 0) {
-			if (!(putDebugChar(ch)))
-				return;
-			checksum += ch;
-			count += 1;
-		}
-
-		putDebugChar('#');
-		putDebugChar(hexchars[checksum >> 4]);
-		putDebugChar(hexchars[checksum & 0xf]);
-
-	}
-	while ((getDebugChar() & 0x7f) != '+');
-}
-
-
-/*
- * Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null), in case of mem fault,
- * return 0.
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault)
-{
-	unsigned char ch;
-
-	while (count-- > 0) {
-		if (kgdb_read_byte(mem++, &ch) != 0)
-			return 0;
-		*buf++ = hexchars[ch >> 4];
-		*buf++ = hexchars[ch & 0xf];
-	}
-
-	*buf = 0;
-
-	return buf;
-}
-
-/*
- * convert the hex array pointed to by buf into binary to be placed in mem
- * return a pointer to the character AFTER the last byte written
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static char *hex2mem(char *buf, char *mem, int count, int binary, int may_fault)
-{
-	int i;
-	unsigned char ch;
-
-	for (i=0; i<count; i++)
-	{
-		if (binary) {
-			ch = *buf++;
-			if (ch == 0x7d)
-				ch = 0x20 ^ *buf++;
-		}
-		else {
-			ch = hex(*buf++) << 4;
-			ch |= hex(*buf++);
-		}
-		if (kgdb_write_byte(ch, mem++) != 0)
-			return 0;
-	}
-
-	return mem;
-}
-
-/*
- * This table contains the mapping between SPARC hardware trap types, and
- * signals, which are primarily what GDB understands.  It also indicates
- * which hardware traps we need to commandeer when initializing the stub.
- */
-static struct hard_trap_info {
-	unsigned char tt;		/* Trap type code for MIPS R3xxx and R4xxx */
-	unsigned char signo;		/* Signal that we map this trap into */
-} hard_trap_info[] = {
-	{ 6, SIGBUS },			/* instruction bus error */
-	{ 7, SIGBUS },			/* data bus error */
-	{ 9, SIGTRAP },			/* break */
-	{ 10, SIGILL },			/* reserved instruction */
-/*	{ 11, SIGILL },		*/	/* CPU unusable */
-	{ 12, SIGFPE },			/* overflow */
-	{ 13, SIGTRAP },		/* trap */
-	{ 14, SIGSEGV },		/* virtual instruction cache coherency */
-	{ 15, SIGFPE },			/* floating point exception */
-	{ 23, SIGSEGV },		/* watch */
-	{ 31, SIGSEGV },		/* virtual data cache coherency */
-	{ 0, 0}				/* Must be last */
-};
-
-/* Save the normal trap handlers for user-mode traps. */
-void *saved_vectors[32];
-
-/*
- * Set up exception handlers for tracing and breakpoints
- */
-void set_debug_traps(void)
-{
-	struct hard_trap_info *ht;
-	unsigned long flags;
-	unsigned char c;
-
-	local_irq_save(flags);
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		saved_vectors[ht->tt] = set_except_vector(ht->tt, trap_low);
-
-	putDebugChar('+'); /* 'hello world' */
-	/*
-	 * In case GDB is started before us, ack any packets
-	 * (presumably "$?#xx") sitting there.
-	 */
-	while((c = getDebugChar()) != '$');
-	while((c = getDebugChar()) != '#');
-	c = getDebugChar(); /* eat first csum byte */
-	c = getDebugChar(); /* eat second csum byte */
-	putDebugChar('+'); /* ack it */
-
-	initialized = 1;
-	local_irq_restore(flags);
-}
-
-void restore_debug_traps(void)
-{
-	struct hard_trap_info *ht;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		set_except_vector(ht->tt, saved_vectors[ht->tt]);
-	local_irq_restore(flags);
-}
-
-/*
- * Convert the MIPS hardware trap type code to a Unix signal number.
- */
-static int computeSignal(int tt)
-{
-	struct hard_trap_info *ht;
-
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		if (ht->tt == tt)
-			return ht->signo;
-
-	return SIGHUP;		/* default for things we don't know about */
-}
-
-/*
- * While we find nice hex chars, build an int.
- * Return number of chars processed.
- */
-static int hexToInt(char **ptr, int *intValue)
-{
-	int numChars = 0;
-	int hexValue;
-
-	*intValue = 0;
-
-	while (**ptr) {
-		hexValue = hex(**ptr);
-		if (hexValue < 0)
-			break;
-
-		*intValue = (*intValue << 4) | hexValue;
-		numChars ++;
-
-		(*ptr)++;
-	}
-
-	return (numChars);
-}
-
-static int hexToLong(char **ptr, long *longValue)
-{
-	int numChars = 0;
-	int hexValue;
-
-	*longValue = 0;
-
-	while (**ptr) {
-		hexValue = hex(**ptr);
-		if (hexValue < 0)
-			break;
-
-		*longValue = (*longValue << 4) | hexValue;
-		numChars ++;
-
-		(*ptr)++;
-	}
-
-	return numChars;
-}
-
-
-#if 0
-/*
- * Print registers (on target console)
- * Used only to debug the stub...
- */
-void show_gdbregs(struct gdb_regs * regs)
-{
-	/*
-	 * Saved main processor registers
-	 */
-	printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg0, regs->reg1, regs->reg2, regs->reg3,
-	       regs->reg4, regs->reg5, regs->reg6, regs->reg7);
-	printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg8, regs->reg9, regs->reg10, regs->reg11,
-	       regs->reg12, regs->reg13, regs->reg14, regs->reg15);
-	printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg16, regs->reg17, regs->reg18, regs->reg19,
-	       regs->reg20, regs->reg21, regs->reg22, regs->reg23);
-	printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg24, regs->reg25, regs->reg26, regs->reg27,
-	       regs->reg28, regs->reg29, regs->reg30, regs->reg31);
-
-	/*
-	 * Saved cp0 registers
-	 */
-	printk("epc  : %08lx\nStatus: %08lx\nCause : %08lx\n",
-	       regs->cp0_epc, regs->cp0_status, regs->cp0_cause);
-}
-#endif /* dead code */
-
-/*
- * We single-step by setting breakpoints. When an exception
- * is handled, we need to restore the instructions hoisted
- * when the breakpoints were set.
- *
- * This is where we save the original instructions.
- */
-static struct gdb_bp_save {
-	unsigned long addr;
-	unsigned int val;
-} step_bp[2];
-
-#define BP 0x0000000d  /* break opcode */
-
-/*
- * Set breakpoint instructions for single stepping.
- */
-static void single_step(struct gdb_regs *regs)
-{
-	union mips_instruction insn;
-	unsigned long targ;
-	int is_branch, is_cond, i;
-
-	targ = regs->cp0_epc;
-	insn.word = *(unsigned int *)targ;
-	is_branch = is_cond = 0;
-
-	switch (insn.i_format.opcode) {
-	/*
-	 * jr and jalr are in r_format format.
-	 */
-	case spec_op:
-		switch (insn.r_format.func) {
-		case jalr_op:
-		case jr_op:
-			targ = *(&regs->reg0 + insn.r_format.rs);
-			is_branch = 1;
-			break;
-		}
-		break;
-
-	/*
-	 * This group contains:
-	 * bltz_op, bgez_op, bltzl_op, bgezl_op,
-	 * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
-	 */
-	case bcond_op:
-		is_branch = is_cond = 1;
-		targ += 4 + (insn.i_format.simmediate << 2);
-		break;
-
-	/*
-	 * These are unconditional and in j_format.
-	 */
-	case jal_op:
-	case j_op:
-		is_branch = 1;
-		targ += 4;
-		targ >>= 28;
-		targ <<= 28;
-		targ |= (insn.j_format.target << 2);
-		break;
-
-	/*
-	 * These are conditional.
-	 */
-	case beq_op:
-	case beql_op:
-	case bne_op:
-	case bnel_op:
-	case blez_op:
-	case blezl_op:
-	case bgtz_op:
-	case bgtzl_op:
-	case cop0_op:
-	case cop1_op:
-	case cop2_op:
-	case cop1x_op:
-		is_branch = is_cond = 1;
-		targ += 4 + (insn.i_format.simmediate << 2);
-		break;
-	}
-
-	if (is_branch) {
-		i = 0;
-		if (is_cond && targ != (regs->cp0_epc + 8)) {
-			step_bp[i].addr = regs->cp0_epc + 8;
-			step_bp[i++].val = *(unsigned *)(regs->cp0_epc + 8);
-			*(unsigned *)(regs->cp0_epc + 8) = BP;
-		}
-		step_bp[i].addr = targ;
-		step_bp[i].val  = *(unsigned *)targ;
-		*(unsigned *)targ = BP;
-	} else {
-		step_bp[0].addr = regs->cp0_epc + 4;
-		step_bp[0].val  = *(unsigned *)(regs->cp0_epc + 4);
-		*(unsigned *)(regs->cp0_epc + 4) = BP;
-	}
-}
-
-/*
- *  If asynchronously interrupted by gdb, then we need to set a breakpoint
- *  at the interrupted instruction so that we wind up stopped with a
- *  reasonable stack frame.
- */
-static struct gdb_bp_save async_bp;
-
-/*
- * Swap the interrupted EPC with our asynchronous breakpoint routine.
- * This is safer than stuffing the breakpoint in-place, since no cache
- * flushes (or resulting smp_call_functions) are required.  The
- * assumption is that only one CPU will be handling asynchronous bp's,
- * and only one can be active at a time.
- */
-extern spinlock_t smp_call_lock;
-
-void set_async_breakpoint(unsigned long *epc)
-{
-	/* skip breaking into userland */
-	if ((*epc & 0x80000000) == 0)
-		return;
-
-#ifdef CONFIG_SMP
-	/* avoid deadlock if someone is make IPC */
-	if (spin_is_locked(&smp_call_lock))
-		return;
-#endif
-
-	async_bp.addr = *epc;
-	*epc = (unsigned long)async_breakpoint;
-}
-
-#ifdef CONFIG_SMP
-static void kgdb_wait(void *arg)
-{
-	unsigned flags;
-	int cpu = smp_processor_id();
-
-	local_irq_save(flags);
-
-	__raw_spin_lock(&kgdb_cpulock[cpu]);
-	__raw_spin_unlock(&kgdb_cpulock[cpu]);
-
-	local_irq_restore(flags);
-}
-#endif
-
-/*
- * GDB stub needs to call kgdb_wait on all processor with interrupts
- * disabled, so it uses it's own special variant.
- */
-static int kgdb_smp_call_kgdb_wait(void)
-{
-#ifdef CONFIG_SMP
-	cpumask_t mask = cpu_online_map;
-	struct call_data_struct data;
-	int cpu = smp_processor_id();
-	int cpus;
-
-	/*
-	 * Can die spectacularly if this CPU isn't yet marked online
-	 */
-	BUG_ON(!cpu_online(cpu));
-
-	cpu_clear(cpu, mask);
-	cpus = cpus_weight(mask);
-	if (!cpus)
-		return 0;
-
-	if (spin_is_locked(&smp_call_lock)) {
-		/*
-		 * Some other processor is trying to make us do something
-		 * but we're not going to respond... give up
-		 */
-		return -1;
-		}
-
-	/*
-	 * We will continue here, accepting the fact that
-	 * the kernel may deadlock if another CPU attempts
-	 * to call smp_call_function now...
-	 */
-
-	data.func = kgdb_wait;
-	data.info = NULL;
-	atomic_set(&data.started, 0);
-	data.wait = 0;
-
-	spin_lock(&smp_call_lock);
-	call_data = &data;
-	mb();
-
-	core_send_ipi_mask(mask, SMP_CALL_FUNCTION);
-
-	/* Wait for response */
-	/* FIXME: lock-up detection, backtrace on lock-up */
-	while (atomic_read(&data.started) != cpus)
-		barrier();
-
-	call_data = NULL;
-	spin_unlock(&smp_call_lock);
-#endif
-
-	return 0;
-}
-
-/*
- * This function does all command processing for interfacing to gdb.  It
- * returns 1 if you should skip the instruction at the trap address, 0
- * otherwise.
- */
-void handle_exception(struct gdb_regs *regs)
-{
-	int trap;			/* Trap type */
-	int sigval;
-	long addr;
-	int length;
-	char *ptr;
-	unsigned long *stack;
-	int i;
-	int bflag = 0;
-
-	kgdb_started = 1;
-
-	/*
-	 * acquire the big kgdb spinlock
-	 */
-	if (!spin_trylock(&kgdb_lock)) {
-		/*
-		 * some other CPU has the lock, we should go back to
-		 * receive the gdb_wait IPC
-		 */
-		return;
-	}
-
-	/*
-	 * If we're in async_breakpoint(), restore the real EPC from
-	 * the breakpoint.
-	 */
-	if (regs->cp0_epc == (unsigned long)async_breakinst) {
-		regs->cp0_epc = async_bp.addr;
-		async_bp.addr = 0;
-	}
-
-	/*
-	 * acquire the CPU spinlocks
-	 */
-	for_each_online_cpu(i)
-		if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0)
-			panic("kgdb: couldn't get cpulock %d\n", i);
-
-	/*
-	 * force other cpus to enter kgdb
-	 */
-	kgdb_smp_call_kgdb_wait();
-
-	/*
-	 * If we're in breakpoint() increment the PC
-	 */
-	trap = (regs->cp0_cause & 0x7c) >> 2;
-	if (trap == 9 && regs->cp0_epc == (unsigned long)breakinst)
-		regs->cp0_epc += 4;
-
-	/*
-	 * If we were single_stepping, restore the opcodes hoisted
-	 * for the breakpoint[s].
-	 */
-	if (step_bp[0].addr) {
-		*(unsigned *)step_bp[0].addr = step_bp[0].val;
-		step_bp[0].addr = 0;
-
-		if (step_bp[1].addr) {
-			*(unsigned *)step_bp[1].addr = step_bp[1].val;
-			step_bp[1].addr = 0;
-		}
-	}
-
-	stack = (long *)regs->reg29;			/* stack ptr */
-	sigval = computeSignal(trap);
-
-	/*
-	 * reply to host that an exception has occurred
-	 */
-	ptr = output_buffer;
-
-	/*
-	 * Send trap type (converted to signal)
-	 */
-	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
-
-	/*
-	 * Send Error PC
-	 */
-	*ptr++ = hexchars[REG_EPC >> 4];
-	*ptr++ = hexchars[REG_EPC & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->cp0_epc, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	/*
-	 * Send frame pointer
-	 */
-	*ptr++ = hexchars[REG_FP >> 4];
-	*ptr++ = hexchars[REG_FP & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->reg30, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	/*
-	 * Send stack pointer
-	 */
-	*ptr++ = hexchars[REG_SP >> 4];
-	*ptr++ = hexchars[REG_SP & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->reg29, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	*ptr++ = 0;
-	putpacket(output_buffer);	/* send it off... */
-
-	/*
-	 * Wait for input from remote GDB
-	 */
-	while (1) {
-		output_buffer[0] = 0;
-		getpacket(input_buffer);
-
-		switch (input_buffer[0])
-		{
-		case '?':
-			output_buffer[0] = 'S';
-			output_buffer[1] = hexchars[sigval >> 4];
-			output_buffer[2] = hexchars[sigval & 0xf];
-			output_buffer[3] = 0;
-			break;
-
-		/*
-		 * Detach debugger; let CPU run
-		 */
-		case 'D':
-			putpacket(output_buffer);
-			goto finish_kgdb;
-			break;
-
-		case 'd':
-			/* toggle debug flag */
-			break;
-
-		/*
-		 * Return the value of the CPU registers
-		 */
-		case 'g':
-			ptr = output_buffer;
-			ptr = mem2hex((char *)&regs->reg0, ptr, 32*sizeof(long), 0); /* r0...r31 */
-			ptr = mem2hex((char *)&regs->cp0_status, ptr, 6*sizeof(long), 0); /* cp0 */
-			ptr = mem2hex((char *)&regs->fpr0, ptr, 32*sizeof(long), 0); /* f0...31 */
-			ptr = mem2hex((char *)&regs->cp1_fsr, ptr, 2*sizeof(long), 0); /* cp1 */
-			ptr = mem2hex((char *)&regs->frame_ptr, ptr, 2*sizeof(long), 0); /* frp */
-			ptr = mem2hex((char *)&regs->cp0_index, ptr, 16*sizeof(long), 0); /* cp0 */
-			break;
-
-		/*
-		 * set the value of the CPU registers - return OK
-		 */
-		case 'G':
-		{
-			ptr = &input_buffer[1];
-			hex2mem(ptr, (char *)&regs->reg0, 32*sizeof(long), 0, 0);
-			ptr += 32*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp0_status, 6*sizeof(long), 0, 0);
-			ptr += 6*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->fpr0, 32*sizeof(long), 0, 0);
-			ptr += 32*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp1_fsr, 2*sizeof(long), 0, 0);
-			ptr += 2*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->frame_ptr, 2*sizeof(long), 0, 0);
-			ptr += 2*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp0_index, 16*sizeof(long), 0, 0);
-			strcpy(output_buffer, "OK");
-		 }
-		break;
-
-		/*
-		 * mAA..AA,LLLL  Read LLLL bytes at address AA..AA
-		 */
-		case 'm':
-			ptr = &input_buffer[1];
-
-			if (hexToLong(&ptr, &addr)
-				&& *ptr++ == ','
-				&& hexToInt(&ptr, &length)) {
-				if (mem2hex((char *)addr, output_buffer, length, 1))
-					break;
-				strcpy(output_buffer, "E03");
-			} else
-				strcpy(output_buffer, "E01");
-			break;
-
-		/*
-		 * XAA..AA,LLLL: Write LLLL escaped binary bytes at address AA.AA
-		 */
-		case 'X':
-			bflag = 1;
-			/* fall through */
-
-		/*
-		 * MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK
-		 */
-		case 'M':
-			ptr = &input_buffer[1];
-
-			if (hexToLong(&ptr, &addr)
-				&& *ptr++ == ','
-				&& hexToInt(&ptr, &length)
-				&& *ptr++ == ':') {
-				if (hex2mem(ptr, (char *)addr, length, bflag, 1))
-					strcpy(output_buffer, "OK");
-				else
-					strcpy(output_buffer, "E03");
-			}
-			else
-				strcpy(output_buffer, "E02");
-			break;
-
-		/*
-		 * cAA..AA    Continue at address AA..AA(optional)
-		 */
-		case 'c':
-			/* try to read optional parameter, pc unchanged if no parm */
-
-			ptr = &input_buffer[1];
-			if (hexToLong(&ptr, &addr))
-				regs->cp0_epc = addr;
-
-			goto exit_kgdb_exception;
-			break;
-
-		/*
-		 * kill the program; let us try to restart the machine
-		 * Reset the whole machine.
-		 */
-		case 'k':
-		case 'r':
-			machine_restart("kgdb restarts machine");
-			break;
-
-		/*
-		 * Step to next instruction
-		 */
-		case 's':
-			/*
-			 * There is no single step insn in the MIPS ISA, so we
-			 * use breakpoints and continue, instead.
-			 */
-			single_step(regs);
-			goto exit_kgdb_exception;
-			/* NOTREACHED */
-			break;
-
-		/*
-		 * Set baud rate (bBB)
-		 * FIXME: Needs to be written
-		 */
-		case 'b':
-		{
-#if 0
-			int baudrate;
-			extern void set_timer_3();
-
-			ptr = &input_buffer[1];
-			if (!hexToInt(&ptr, &baudrate))
-			{
-				strcpy(output_buffer, "B01");
-				break;
-			}
-
-			/* Convert baud rate to uart clock divider */
-
-			switch (baudrate)
-			{
-				case 38400:
-					baudrate = 16;
-					break;
-				case 19200:
-					baudrate = 33;
-					break;
-				case 9600:
-					baudrate = 65;
-					break;
-				default:
-					baudrate = 0;
-					strcpy(output_buffer, "B02");
-					goto x1;
-			}
-
-			if (baudrate) {
-				putpacket("OK");	/* Ack before changing speed */
-				set_timer_3(baudrate); /* Set it */
-			}
-#endif
-		}
-		break;
-
-		}			/* switch */
-
-		/*
-		 * reply to the request
-		 */
-
-		putpacket(output_buffer);
-
-	} /* while */
-
-	return;
-
-finish_kgdb:
-	restore_debug_traps();
-
-exit_kgdb_exception:
-	/* release locks so other CPUs can go */
-	for_each_online_cpu(i)
-		__raw_spin_unlock(&kgdb_cpulock[i]);
-	spin_unlock(&kgdb_lock);
-
-	__flush_cache_all();
-	return;
-}
-
-/*
- * This function will generate a breakpoint exception.  It is used at the
- * beginning of a program to sync up with a debugger and can be used
- * otherwise as a quick means to stop program execution and "break" into
- * the debugger.
- */
-void breakpoint(void)
-{
-	if (!initialized)
-		return;
-
-	__asm__ __volatile__(
-			".globl	breakinst\n\t"
-			".set\tnoreorder\n\t"
-			"nop\n"
-			"breakinst:\tbreak\n\t"
-			"nop\n\t"
-			".set\treorder"
-			);
-}
-
-/* Nothing but the break; don't pollute any registers */
-void async_breakpoint(void)
-{
-	__asm__ __volatile__(
-			".globl	async_breakinst\n\t"
-			".set\tnoreorder\n\t"
-			"nop\n"
-			"async_breakinst:\tbreak\n\t"
-			"nop\n\t"
-			".set\treorder"
-			);
-}
-
-void adel(void)
-{
-	__asm__ __volatile__(
-			".globl\tadel\n\t"
-			"lui\t$8,0x8000\n\t"
-			"lw\t$9,1($8)\n\t"
-			);
-}
-
-/*
- * malloc is needed by gdb client in "call func()", even a private one
- * will make gdb happy
- */
-static void __used *malloc(size_t size)
-{
-	return kmalloc(size, GFP_ATOMIC);
-}
-
-static void __used free(void *where)
-{
-	kfree(where);
-}
-
-#ifdef CONFIG_GDB_CONSOLE
-
-void gdb_putsn(const char *str, int l)
-{
-	char outbuf[18];
-
-	if (!kgdb_started)
-		return;
-
-	outbuf[0]='O';
-
-	while(l) {
-		int i = (l>8)?8:l;
-		mem2hex((char *)str, &outbuf[1], i, 0);
-		outbuf[(i*2)+1]=0;
-		putpacket(outbuf);
-		str += i;
-		l -= i;
-	}
-}
-
-static void gdb_console_write(struct console *con, const char *s, unsigned n)
-{
-	gdb_putsn(s, n);
-}
-
-static struct console gdb_console = {
-	.name	= "gdb",
-	.write	= gdb_console_write,
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1
-};
-
-static int __init register_gdb_console(void)
-{
-	register_console(&gdb_console);
-
-	return 0;
-}
-
-console_initcall(register_gdb_console);
-
-#endif
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index 6045b9a..4b4007b 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -21,11 +21,16 @@
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/kallsyms.h>
+#include <linux/kgdb.h>
 
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 
+#ifdef CONFIG_KGDB
+int kgdb_early_setup;
+#endif
+
 static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
 
 int allocate_irqno(void)
@@ -126,33 +131,22 @@ asmlinkage void spurious_interrupt(void)
 	atomic_inc(&irq_err_count);
 }
 
-#ifdef CONFIG_KGDB
-extern void breakpoint(void);
-extern void set_debug_traps(void);
-
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-	kgdb_flag = 0;
-	return 1;
-}
-__setup("nokgdb", nokgdb);
-#endif
-
 void __init init_IRQ(void)
 {
 	int i;
 
+#ifdef CONFIG_KGDB
+	if (kgdb_early_setup)
+		return;
+#endif
+
 	for (i = 0; i < NR_IRQS; i++)
 		set_irq_noprobe(i);
 
 	arch_init_irq();
 
 #ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		printk("Wait for gdb client connection ...\n");
-		set_debug_traps();
-		breakpoint();
-	}
+	if (!kgdb_early_setup)
+		kgdb_early_setup = 1;
 #endif
 }
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
new file mode 100644
index 0000000..c5a8b2d
--- /dev/null
+++ b/arch/mips/kernel/kgdb.c
@@ -0,0 +1,281 @@
+/*
+ *  Originally written by Glenn Engel, Lake Stevens Instrument Division
+ *
+ *  Contributed by HP Systems
+ *
+ *  Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
+ *  Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
+ *
+ *  Copyright (C) 1995 Andreas Busse
+ *
+ *  Copyright (C) 2003 MontaVista Software Inc.
+ *  Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ *  Copyright (C) 2004-2005 MontaVista Software Inc.
+ *  Author: Manish Lachwani, mlachwani@mvista.com or manish@koffee-break.com
+ *
+ *  Copyright (C) 2007-2008 Wind River Systems, Inc.
+ *  Author/Maintainer: Jason Wessel, jason.wessel@windriver.com
+ *
+ *  This file is licensed under the terms of the GNU General Public License
+ *  version 2. This program is licensed "as is" without any warranty of any
+ *  kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>		/* for linux pt_regs struct */
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/sched.h>
+#include <asm/inst.h>
+#include <asm/fpu.h>
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+
+static struct hard_trap_info {
+	unsigned char tt;	/* Trap type code for MIPS R3xxx and R4xxx */
+	unsigned char signo;	/* Signal that we map this trap into */
+} hard_trap_info[] = {
+	{ 6, SIGBUS },		/* instruction bus error */
+	{ 7, SIGBUS },		/* data bus error */
+	{ 9, SIGTRAP },		/* break */
+/*	{ 11, SIGILL },	*/	/* CPU unusable */
+	{ 12, SIGFPE },		/* overflow */
+	{ 13, SIGTRAP },	/* trap */
+	{ 14, SIGSEGV },	/* virtual instruction cache coherency */
+	{ 15, SIGFPE },		/* floating point exception */
+	{ 23, SIGSEGV },	/* watch */
+	{ 31, SIGSEGV },	/* virtual data cache coherency */
+	{ 0, 0}			/* Must be last */
+};
+
+void arch_kgdb_breakpoint(void)
+{
+	__asm__ __volatile__(
+		".globl breakinst\n\t"
+		".set\tnoreorder\n\t"
+		"nop\n"
+		"breakinst:\tbreak\n\t"
+		"nop\n\t"
+		".set\treorder");
+}
+
+static void kgdb_call_nmi_hook(void *ignored)
+{
+	kgdb_nmicallback(raw_smp_processor_id(), (void *)0);
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	local_irq_enable();
+	smp_call_function(kgdb_call_nmi_hook, NULL, NULL);
+	local_irq_disable();
+}
+
+static int compute_signal(int tt)
+{
+	struct hard_trap_info *ht;
+
+	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+		if (ht->tt == tt)
+			return ht->signo;
+
+	return SIGHUP;		/* default for things we don't know about */
+}
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+	u32 *ptr = (u32 *)gdb_regs;
+#else
+	u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 32; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	*(ptr++) = regs->cp0_status;
+	*(ptr++) = regs->lo;
+	*(ptr++) = regs->hi;
+	*(ptr++) = regs->cp0_badvaddr;
+	*(ptr++) = regs->cp0_cause;
+	*(ptr++) = regs->cp0_epc;
+
+	/* FP REGS */
+	if (!(current && (regs->cp0_status & ST0_CU1)))
+		return;
+
+	save_fp(current);
+	for (reg = 0; reg < 32; reg++)
+		*(ptr++) = current->thread.fpu.fpr[reg];
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+	const u32 *ptr = (u32 *)gdb_regs;
+#else
+	const u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 32; reg++)
+		regs->regs[reg] = *(ptr++);
+
+	regs->cp0_status = *(ptr++);
+	regs->lo = *(ptr++);
+	regs->hi = *(ptr++);
+	regs->cp0_badvaddr = *(ptr++);
+	regs->cp0_cause = *(ptr++);
+	regs->cp0_epc = *(ptr++);
+
+	/* FP REGS from current */
+	if (!(current && (regs->cp0_status & ST0_CU1)))
+		return;
+
+	for (reg = 0; reg < 32; reg++)
+		current->thread.fpu.fpr[reg] = *(ptr++);
+	restore_fp(current);
+}
+
+/*
+ * Similar to regs_to_gdb_regs() except that process is sleeping and so
+ * we may not be able to get all the info.
+ */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	int reg;
+	struct thread_info *ti = task_thread_info(p);
+	unsigned long ksp = (unsigned long)ti + THREAD_SIZE - 32;
+	struct pt_regs *regs = (struct pt_regs *)ksp - 1;
+#if (KGDB_GDB_REG_SIZE == 32)
+	u32 *ptr = (u32 *)gdb_regs;
+#else
+	u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 16; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	/* S0 - S7 */
+	for (reg = 16; reg < 24; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	for (reg = 24; reg < 28; reg++)
+		*(ptr++) = 0;
+
+	/* GP, SP, FP, RA */
+	for (reg = 28; reg < 32; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	*(ptr++) = regs->cp0_status;
+	*(ptr++) = regs->lo;
+	*(ptr++) = regs->hi;
+	*(ptr++) = regs->cp0_badvaddr;
+	*(ptr++) = regs->cp0_cause;
+	*(ptr++) = regs->cp0_epc;
+}
+
+/*
+ * Calls linux_debug_hook before the kernel dies. If KGDB is enabled,
+ * then try to fall into the debugger
+ */
+static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
+			    void *ptr)
+{
+	struct die_args *args = (struct die_args *)ptr;
+	struct pt_regs *regs = args->regs;
+	int trap = (regs->cp0_cause & 0x7c) >> 2;
+
+	if (fixup_exception(regs))
+		return NOTIFY_DONE;
+
+	/* Userpace events, ignore. */
+	if (user_mode(regs))
+		return NOTIFY_DONE;
+
+	if (atomic_read(&kgdb_active) != -1)
+		kgdb_nmicallback(smp_processor_id(), regs);
+
+	if (kgdb_handle_exception(trap, compute_signal(trap), 0, regs))
+		return NOTIFY_DONE;
+
+	if (atomic_read(&kgdb_setting_breakpoint))
+		if ((trap == 9) && (regs->cp0_epc == (unsigned long)breakinst))
+			regs->cp0_epc += 4;
+
+	/* In SMP mode, __flush_cache_all does IPI */
+	local_irq_enable();
+	__flush_cache_all();
+
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block kgdb_notifier = {
+	.notifier_call = kgdb_mips_notify,
+};
+
+/*
+ * Handle the 's' and 'c' commands
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			       char *remcom_in_buffer, char *remcom_out_buffer,
+			       struct pt_regs *regs)
+{
+	char *ptr;
+	unsigned long address;
+	int cpu = smp_processor_id();
+
+	switch (remcom_in_buffer[0]) {
+	case 's':
+	case 'c':
+		/* handle the optional parameter */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &address))
+			regs->cp0_epc = address;
+
+		atomic_set(&kgdb_cpu_doing_single_step, -1);
+		if (remcom_in_buffer[0] == 's')
+			if (kgdb_contthread)
+				atomic_set(&kgdb_cpu_doing_single_step, cpu);
+
+		return 0;
+	}
+
+	return -1;
+}
+
+struct kgdb_arch arch_kgdb_ops;
+
+/*
+ * We use kgdb_early_setup so that functions we need to call now don't
+ * cause trouble when called again later.
+ */
+int kgdb_arch_init(void)
+{
+	union mips_instruction insn = {
+		.r_format = {
+			.opcode = spec_op,
+			.func   = break_op,
+		}
+	};
+	memcpy(arch_kgdb_ops.gdb_bpt_instr, insn.byte, BREAK_INSTR_SIZE);
+
+	register_die_notifier(&kgdb_notifier);
+
+	return 0;
+}
+
+/*
+ *	kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *	This function will handle the uninitalization of any architecture
+ *	specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+	unregister_die_notifier(&kgdb_notifier);
+}
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index b8ea4e9..426cced 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -23,6 +23,8 @@
 #include <linux/bootmem.h>
 #include <linux/interrupt.h>
 #include <linux/ptrace.h>
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
 
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
@@ -425,6 +427,10 @@ asmlinkage void do_be(struct pt_regs *regs)
 	printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
 	       data ? "Data" : "Instruction",
 	       field, regs->cp0_epc, field, regs->regs[31]);
+	if (notify_die(DIE_OOPS, "bus error", regs, SIGBUS, 0, 0)
+	    == NOTIFY_STOP)
+		return;
+
 	die_if_kernel("Oops", regs);
 	force_sig(SIGBUS, current);
 }
@@ -623,6 +629,9 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 {
 	siginfo_t info;
 
+	if (notify_die(DIE_FP, "FP exception", regs, SIGFPE, 0, 0)
+	    == NOTIFY_STOP)
+		return;
 	die_if_kernel("FP exception in kernel code", regs);
 
 	if (fcr31 & FPU_CSR_UNI_X) {
@@ -682,6 +691,9 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 	siginfo_t info;
 	char b[40];
 
+	if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
+		return;
+
 	/*
 	 * A short test says that IRIX 5.3 sends SIGTRAP for all trap
 	 * insns, even for trap and break codes that indicate arithmetic
@@ -762,6 +774,10 @@ asmlinkage void do_ri(struct pt_regs *regs)
 	unsigned int opcode = 0;
 	int status = -1;
 
+	if (notify_die(DIE_RI, "RI Fault", regs, SIGSEGV, 0, 0)
+	    == NOTIFY_STOP)
+		return;
+
 	die_if_kernel("Reserved instruction in kernel code", regs);
 
 	if (unlikely(compute_return_epc(regs) < 0))
@@ -1537,6 +1553,11 @@ void __init trap_init(void)
 	extern char except_vec4;
 	unsigned long i;
 
+#if defined(CONFIG_KGDB)
+	if (kgdb_early_setup)
+		return;	/* Already done */
+#endif
+
 	if (cpu_has_veic || cpu_has_vint)
 		ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64);
 	else
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index a782549..f0cf46a 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -246,10 +246,6 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 		old_pagemask = read_c0_pagemask();
 		w = read_c0_wired();
 		write_c0_wired(w + 1);
-		if (read_c0_wired() != w + 1) {
-			printk("[tlbwired] No WIRED reg?\n");
-			return;
-		}
 		write_c0_index(w << 8);
 		write_c0_pagemask(pagemask);
 		write_c0_entryhi(entryhi);
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index f806444..3b7dd72 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -13,7 +13,6 @@ obj-y				:= malta-amon.o malta-cmdline.o \
 
 obj-$(CONFIG_EARLY_PRINTK)	+= malta-console.o
 obj-$(CONFIG_PCI)		+= malta-pci.o
-obj-$(CONFIG_KGDB)		+= malta-kgdb.o
 
 # FIXME FIXME FIXME
 obj-$(CONFIG_MIPS_MT_SMTC)	+= malta_smtc.o
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index c065302..4832af2 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -37,15 +37,6 @@
 
 #include <asm/mips-boards/malta.h>
 
-#ifdef CONFIG_KGDB
-extern int rs_kgdb_hook(int, int);
-extern int rs_putDebugChar(char);
-extern char rs_getDebugChar(void);
-extern int saa9730_kgdb_hook(int);
-extern int saa9730_putDebugChar(char);
-extern char saa9730_getDebugChar(void);
-#endif
-
 int prom_argc;
 int *_prom_argv, *_prom_envp;
 
@@ -173,51 +164,6 @@ static void __init console_config(void)
 }
 #endif
 
-#ifdef CONFIG_KGDB
-void __init kgdb_config(void)
-{
-	extern int (*generic_putDebugChar)(char);
-	extern char (*generic_getDebugChar)(void);
-	char *argptr;
-	int line, speed;
-
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-		argptr += strlen("kgdb=ttyS");
-		if (*argptr != '0' && *argptr != '1')
-			printk("KGDB: Unknown serial line /dev/ttyS%c, "
-			       "falling back to /dev/ttyS1\n", *argptr);
-		line = *argptr == '0' ? 0 : 1;
-		printk("KGDB: Using serial line /dev/ttyS%d for session\n", line);
-
-		speed = 0;
-		if (*++argptr == ',')
-		{
-			int c;
-			while ((c = *++argptr) && ('0' <= c && c <= '9'))
-				speed = speed * 10 + c - '0';
-		}
-		{
-			speed = rs_kgdb_hook(line, speed);
-			generic_putDebugChar = rs_putDebugChar;
-			generic_getDebugChar = rs_getDebugChar;
-		}
-
-		pr_info("KGDB: Using serial line /dev/ttyS%d at %d for "
-		        "session, please connect your debugger\n",
-		        line ? 1 : 0, speed);
-
-		{
-			char *s;
-			for (s = "Please connect GDB to this port\r\n"; *s; )
-				generic_putDebugChar(*s++);
-		}
-
-		/* Breakpoint is invoked after interrupts are initialised */
-	}
-}
-#endif
-
 static void __init mips_nmi_setup(void)
 {
 	void *base;
diff --git a/arch/mips/mti-malta/malta-kgdb.c b/arch/mips/mti-malta/malta-kgdb.c
deleted file mode 100644
index 6a1854d..0000000
--- a/arch/mips/mti-malta/malta-kgdb.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * This is the interface to the remote debugger stub.
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static struct serial_state rs_table[] = {
-	SERIAL_PORT_DFNS	/* Defined in serial.h */
-};
-
-static struct async_struct kdb_port_info = {0};
-
-int (*generic_putDebugChar)(char);
-char (*generic_getDebugChar)(void);
-
-static __inline__ unsigned int serial_in(struct async_struct *info, int offset)
-{
-	return inb(info->port + offset);
-}
-
-static __inline__ void serial_out(struct async_struct *info, int offset,
-				int value)
-{
-	outb(value, info->port+offset);
-}
-
-int rs_kgdb_hook(int tty_no, int speed) {
-	int t;
-	struct serial_state *ser = &rs_table[tty_no];
-
-	kdb_port_info.state = ser;
-	kdb_port_info.magic = SERIAL_MAGIC;
-	kdb_port_info.port = ser->port;
-	kdb_port_info.flags = ser->flags;
-
-	/*
-	 * Clear all interrupts
-	 */
-	serial_in(&kdb_port_info, UART_LSR);
-	serial_in(&kdb_port_info, UART_RX);
-	serial_in(&kdb_port_info, UART_IIR);
-	serial_in(&kdb_port_info, UART_MSR);
-
-	/*
-	 * Now, initialize the UART
-	 */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);	/* reset DLAB */
-	if (kdb_port_info.flags & ASYNC_FOURPORT) {
-		kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS;
-		t = UART_MCR_DTR | UART_MCR_OUT1;
-	} else {
-		kdb_port_info.MCR
-			= UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
-		t = UART_MCR_DTR | UART_MCR_RTS;
-	}
-
-	kdb_port_info.MCR = t;		/* no interrupts, please */
-	serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR);
-
-	/*
-	 * and set the speed of the serial port
-	 */
-	if (speed == 0)
-		speed = 9600;
-
-	t = kdb_port_info.state->baud_base / speed;
-	/* set DLAB */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB);
-	serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */
-	serial_out(&kdb_port_info, UART_DLM, t >> 8);  /* MS of divisor */
-	/* reset DLAB */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);
-
-	return speed;
-}
-
-int putDebugChar(char c)
-{
-	return generic_putDebugChar(c);
-}
-
-char getDebugChar(void)
-{
-	return generic_getDebugChar();
-}
-
-int rs_putDebugChar(char c)
-{
-
-	if (!kdb_port_info.state) { 	/* need to init device first */
-		return 0;
-	}
-
-	while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0)
-		;
-
-	serial_out(&kdb_port_info, UART_TX, c);
-
-	return 1;
-}
-
-char rs_getDebugChar(void)
-{
-	if (!kdb_port_info.state) { 	/* need to init device first */
-		return 0;
-	}
-
-	while (!(serial_in(&kdb_port_info, UART_LSR) & 1))
-		;
-
-	return serial_in(&kdb_port_info, UART_RX);
-}
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index e7cad54..dc78b89 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -199,10 +199,6 @@ void __init plat_mem_setup(void)
 	 */
 	enable_dma(4);
 
-#ifdef CONFIG_KGDB
-	kgdb_config();
-#endif
-
 #ifdef CONFIG_DMA_COHERENT
 	if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO)
 		panic("Hardware DMA cache coherency not supported");
diff --git a/arch/mips/nxp/pnx8550/common/Makefile b/arch/mips/nxp/pnx8550/common/Makefile
index 31cc1a5..dd9e7b1 100644
--- a/arch/mips/nxp/pnx8550/common/Makefile
+++ b/arch/mips/nxp/pnx8550/common/Makefile
@@ -24,6 +24,5 @@
 
 obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
 obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_KGDB) += gdb_hook.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/nxp/pnx8550/common/gdb_hook.c b/arch/mips/nxp/pnx8550/common/gdb_hook.c
deleted file mode 100644
index ad4624f..0000000
--- a/arch/mips/nxp/pnx8550/common/gdb_hook.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * This is the interface to the remote debugger stub.
- *
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_ip3106.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-#include <uart.h>
-
-static struct serial_state rs_table[IP3106_NR_PORTS] = {
-};
-static struct async_struct kdb_port_info = {0};
-
-void rs_kgdb_hook(int tty_no)
-{
-	struct serial_state *ser = &rs_table[tty_no];
-
-	kdb_port_info.state = ser;
-	kdb_port_info.magic = SERIAL_MAGIC;
-	kdb_port_info.port  = tty_no;
-	kdb_port_info.flags = ser->flags;
-
-	/*
-	 * Clear all interrupts
-	 */
-	/* Clear all the transmitter FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST;
-	/* Clear all the receiver FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST;
-	/* Clear all interrupts */
-	ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX |
-		IP3106_UART_INT_ALLTX;
-
-	/*
-	 * Now, initialize the UART
-	 */
-	ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT;
-	ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud
-}
-
-int putDebugChar(char c)
-{
-	/* Wait until FIFO not full */
-	while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
-		;
-	/* Send one char */
-	ip3106_fifo(UART_BASE, kdb_port_info.port) = c;
-
-	return 1;
-}
-
-char getDebugChar(void)
-{
-	char ch;
-
-	/* Wait until there is a char in the FIFO */
-	while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) &
-					IP3106_UART_FIFO_RXFIFO) >> 8))
-		;
-	/* Read one char */
-	ch = ip3106_fifo(UART_BASE, kdb_port_info.port) &
-		IP3106_UART_FIFO_RBRTHR;
-	/* Advance the RX FIFO read pointer */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT;
-	return (ch);
-}
-
-void rs_disable_debug_interrupts(void)
-{
-	ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */
-}
-
-void rs_enable_debug_interrupts(void)
-{
-	/* Clear all the transmitter FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST;
-	/* Clear all the receiver FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST;
-	/* Clear all interrupts */
-	ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX |
-		IP3106_UART_INT_ALLTX;
-	ip3106_ien(UART_BASE, kdb_port_info.port)  = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */
-}
diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c
index aad0342..f080f11 100644
--- a/arch/mips/nxp/pnx8550/common/int.c
+++ b/arch/mips/nxp/pnx8550/common/int.c
@@ -34,7 +34,6 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/gdb-stub.h>
 #include <int.h>
 #include <uart.h>
 
diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c
index 18b125e3..acf1fa8 100644
--- a/arch/mips/nxp/pnx8550/common/proc.c
+++ b/arch/mips/nxp/pnx8550/common/proc.c
@@ -22,7 +22,6 @@
 #include <linux/random.h>
 
 #include <asm/io.h>
-#include <asm/gdb-stub.h>
 #include <int.h>
 #include <uart.h>
 
diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c
index 92d764c..2aed50f 100644
--- a/arch/mips/nxp/pnx8550/common/setup.c
+++ b/arch/mips/nxp/pnx8550/common/setup.c
@@ -47,7 +47,6 @@ extern void pnx8550_machine_halt(void);
 extern void pnx8550_machine_power_off(void);
 extern struct resource ioport_resource;
 extern struct resource iomem_resource;
-extern void rs_kgdb_hook(int tty_no);
 extern char *prom_getcmdline(void);
 
 struct resource standard_io_resources[] = {
@@ -142,16 +141,5 @@ void __init plat_mem_setup(void)
 		ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
 	}
 
-#ifdef CONFIG_KGDB
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-		int line;
-		argptr += strlen("kgdb=ttyS");
-		line = *argptr == '0' ? 0 : 1;
-		rs_kgdb_hook(line);
-		pr_info("KGDB: Using ttyS%i for session, "
-		        "please connect your debugger\n", line ? 1 : 0);
-	}
-#endif
 	return;
 }
diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c
index 8a17a39..31c1501 100644
--- a/arch/mips/pci/ops-tx3927.c
+++ b/arch/mips/pci/ops-tx3927.c
@@ -37,45 +37,48 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 
 #include <asm/addrspace.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/pci.h>
 #include <asm/txx9/tx3927.h>
 
-static inline int mkaddr(unsigned char bus, unsigned char dev_fn,
-	unsigned char where)
+static int mkaddr(struct pci_bus *bus, unsigned char devfn, unsigned char where)
 {
-	if (bus == 0 && dev_fn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	tx3927_pcicptr->ica = ((bus & 0xff) << 0x10) |
-	                      ((dev_fn & 0xff) << 0x08) |
-	                      (where & 0xfc);
+	if (bus->parent == NULL &&
+	    devfn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
+		return -1;
+	tx3927_pcicptr->ica =
+		((bus->number & 0xff) << 0x10) |
+		((devfn & 0xff) << 0x08) |
+		(where & 0xfc) | (bus->parent ? 1 : 0);
 
 	/* clear M_ABORT and Disable M_ABORT Int. */
 	tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
 	tx3927_pcicptr->pcistatim &= ~PCI_STATUS_REC_MASTER_ABORT;
-
-	return PCIBIOS_SUCCESSFUL;
+	return 0;
 }
 
 static inline int check_abort(void)
 {
-	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
+	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) {
 		tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
 		tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
+		/* flush write buffer */
+		iob();
 		return PCIBIOS_DEVICE_NOT_FOUND;
-
+	}
 	return PCIBIOS_SUCCESSFUL;
 }
 
 static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 * val)
 {
-	int ret;
-
-	ret = mkaddr(bus->number, devfn, where);
-	if (ret)
-		return ret;
+	if (mkaddr(bus, devfn, where)) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
 
 	switch (size) {
 	case 1:
@@ -97,11 +100,8 @@ static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 val)
 {
-	int ret;
-
-	ret = mkaddr(bus->number, devfn, where);
-	if (ret)
-		return ret;
+	if (mkaddr(bus, devfn, where))
+		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	switch (size) {
 	case 1:
@@ -117,11 +117,6 @@ static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 		tx3927_pcicptr->icd = cpu_to_le32(val);
 	}
 
-	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
-		tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
-		tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
 	return check_abort();
 }
 
@@ -202,3 +197,34 @@ void __init tx3927_pcic_setup(struct pci_controller *channel,
 		PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
 	local_irq_restore(flags);
 }
+
+static irqreturn_t tx3927_pcierr_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+
+	if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+		printk(KERN_WARNING "PCI error interrupt at 0x%08lx.\n",
+		       regs->cp0_epc);
+		printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
+		       tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
+	}
+	if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+		/* clear all pci errors */
+		tx3927_pcicptr->pcistat |= TX3927_PCIC_PCISTATIM_ALL;
+		tx3927_pcicptr->istat = TX3927_PCIC_IIM_ALL;
+		tx3927_pcicptr->tstat = TX3927_PCIC_TIM_ALL;
+		tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
+		return IRQ_HANDLED;
+	}
+	console_verbose();
+	panic("PCI error.");
+}
+
+void __init tx3927_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX3927_IR_PCI,
+			tx3927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX3927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index c6b49bc..5989e74 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -16,6 +16,8 @@
  * option) any later version.
  */
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <asm/txx9/pci.h>
 #include <asm/txx9/tx4927pcic.h>
 
 static struct {
@@ -85,6 +87,8 @@ static int check_abort(struct tx4927_pcic_reg __iomem *pcicptr)
 		__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
 			     | (PCI_STATUS_REC_MASTER_ABORT << 16),
 			     &pcicptr->pcistatus);
+		/* flush write buffer */
+		iob();
 		code = PCIBIOS_DEVICE_NOT_FOUND;
 	}
 	return code;
@@ -192,6 +196,28 @@ static struct {
 	.gbwc = 0xfe0,	/* 4064 GBUSCLK for CCFG.GTOT=0b11 */
 };
 
+char *__devinit tx4927_pcibios_setup(char *str)
+{
+	unsigned long val;
+
+	if (!strncmp(str, "trdyto=", 7)) {
+		if (strict_strtoul(str + 7, 0, &val) == 0)
+			tx4927_pci_opts.trdyto = val;
+		return NULL;
+	}
+	if (!strncmp(str, "retryto=", 8)) {
+		if (strict_strtoul(str + 8, 0, &val) == 0)
+			tx4927_pci_opts.retryto = val;
+		return NULL;
+	}
+	if (!strncmp(str, "gbwc=", 5)) {
+		if (strict_strtoul(str + 5, 0, &val) == 0)
+			tx4927_pci_opts.gbwc = val;
+		return NULL;
+	}
+	return str;
+}
+
 void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
 			      struct pci_controller *channel, int extarb)
 {
@@ -406,3 +432,95 @@ void tx4927_report_pcic_status(void)
 			tx4927_report_pcic_status1(pcicptrs[i].pcicptr);
 	}
 }
+
+static void tx4927_dump_pcic_settings1(struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	int i;
+	__u32 __iomem *preg = (__u32 __iomem *)pcicptr;
+
+	printk(KERN_INFO "tx4927 pcic (0x%p) settings:", pcicptr);
+	for (i = 0; i < sizeof(struct tx4927_pcic_reg); i += 4, preg++) {
+		if (i % 32 == 0) {
+			printk(KERN_CONT "\n");
+			printk(KERN_INFO "%04x:", i);
+		}
+		/* skip registers with side-effects */
+		if (i == offsetof(struct tx4927_pcic_reg, g2pintack)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pspc)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pcfgadrs)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pcfgdata)) {
+			printk(KERN_CONT " XXXXXXXX");
+			continue;
+		}
+		printk(KERN_CONT " %08x", __raw_readl(preg));
+	}
+	printk(KERN_CONT "\n");
+}
+
+void tx4927_dump_pcic_settings(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (pcicptrs[i].pcicptr)
+			tx4927_dump_pcic_settings1(pcicptrs[i].pcicptr);
+	}
+}
+
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	struct tx4927_pcic_reg __iomem *pcicptr =
+		(struct tx4927_pcic_reg __iomem *)(unsigned long)dev_id;
+
+	if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+		printk(KERN_WARNING "PCIERR interrupt at 0x%0*lx\n",
+		       (int)(2 * sizeof(unsigned long)), regs->cp0_epc);
+		tx4927_report_pcic_status1(pcicptr);
+	}
+	if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+		/* clear all pci errors */
+		__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+			     | (TX4927_PCIC_PCISTATUS_ALL << 16),
+			     &pcicptr->pcistatus);
+		__raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus);
+		__raw_writel(TX4927_PCIC_PBASTATUS_ALL, &pcicptr->pbastatus);
+		__raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus);
+		return IRQ_HANDLED;
+	}
+	console_verbose();
+	tx4927_dump_pcic_settings1(pcicptr);
+	panic("PCI error.");
+}
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+{
+	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
+
+	if (!pcicptr)
+		return;
+	if (__raw_readl(&pcicptr->pbacfg) & TX4927_PCIC_PBACFG_PBAEN) {
+		/* Reset Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg);
+		/*
+		 * swap reqBP and reqXP (raise priority of SLC90E66).
+		 * SLC90E66(PCI-ISA bridge) is connected to REQ2 on
+		 * PCI Backplane board.
+		 */
+		__raw_writel(0x72543610, &pcicptr->pbareqport);
+		__raw_writel(0, &pcicptr->pbabm);
+		/* Use Fixed ParkMaster (required by SLC90E66) */
+		__raw_writel(TX4927_PCIC_PBACFG_FIXPA, &pcicptr->pbacfg);
+		/* Enable Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_FIXPA |
+			     TX4927_PCIC_PBACFG_PBAEN,
+			     &pcicptr->pbacfg);
+		printk(KERN_INFO "PCI: Use Fixed Park Master (REQPORT %08x)\n",
+		       __raw_readl(&pcicptr->pbareqport));
+	}
+}
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
+	tx4927_quirk_slc90e66_bridge);
+#endif
diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c
index 27e86a0..aaa9005 100644
--- a/arch/mips/pci/pci-tx4927.c
+++ b/arch/mips/pci/pci-tx4927.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4927.h>
 
@@ -81,3 +82,12 @@ int __init tx4927_pciclk66_setup(void)
 		pciclk = -1;
 	return pciclk;
 }
+
+void __init tx4927_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX4927_IR_PCIERR,
+			tx4927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX4927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c
index e537551..60e2c52 100644
--- a/arch/mips/pci/pci-tx4938.c
+++ b/arch/mips/pci/pci-tx4938.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4938.h>
 
@@ -132,3 +133,12 @@ int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
 	}
 	return -1;
 }
+
+void __init tx4938_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX4938_IR_PCIERR,
+			tx4927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX4927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 77bd5b6..c7fe6ec 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -328,7 +328,11 @@ EXPORT_SYMBOL(PCIBIOS_MIN_IO);
 EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
 #endif
 
-char *pcibios_setup(char *str)
+char * (*pcibios_plat_setup)(char *str) __devinitdata;
+
+char *__devinit pcibios_setup(char *str)
 {
+	if (pcibios_plat_setup)
+		return pcibios_plat_setup(str);
 	return str;
 }
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
index 9de3430..f726162 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
@@ -38,68 +38,6 @@
 #include <msp_int.h>
 #include <msp_regs.h>
 
-#ifdef CONFIG_KGDB
-/*
- * kgdb uses serial port 1 so the console can remain on port 0.
- * To use port 0 change the definition to read as follows:
- * #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE)
- */
-#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE)
-
-int putDebugChar(char c)
-{
-	volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
-	uint32_t val = (uint32_t)c;
-
-	local_irq_disable();
-	while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
-	uart[0] = val;
-	while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
-	local_irq_enable();
-
-	return 1;
-}
-
-char getDebugChar(void)
-{
-	volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
-	uint32_t val;
-
-	while( !(uart[5] & 0x01) ); /* Wait for RXRDY */
-	val = uart[0];
-
-	return (char)val;
-}
-
-void initDebugPort(unsigned int uartclk, unsigned int baudrate)
-{
-	unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate);
-
-	/* Enable FIFOs */
-	writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
-			UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4,
-		(char *)DEBUG_PORT_BASE + (UART_FCR * 4));
-
-	/* Select brtc divisor */
-	writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
-	/* Store divisor lsb */
-	writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4));
-
-	/* Store divisor msb */
-	writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-
-	/* Set 8N1 mode */
-	writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
-	/* Disable flow control */
-	writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4));
-
-	/* Disable receive interrupt(!) */
-	writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-}
-#endif
-
 void __init msp_serial_setup(void)
 {
 	char    *s;
@@ -139,17 +77,6 @@ void __init msp_serial_setup(void)
 		case MACH_MSP7120_FPGA:
 			/* Enable UART1 on MSP4200 and MSP7120 */
 			*GPIO_CFG2_REG = 0x00002299;
-
-#ifdef CONFIG_KGDB
-			/* Initialize UART1 for kgdb since PMON doesn't */
-			if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) {
-				if( mips_machtype == MACH_MSP4200_FPGA
-				 || mips_machtype == MACH_MSP7120_FPGA )
-					initDebugPort(uartclk, 19200);
-				else
-					initDebugPort(uartclk, 57600);
-			}
-#endif
 			break;
 
 		default:
diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile
index 8fd9a04..b16f95c 100644
--- a/arch/mips/pmc-sierra/yosemite/Makefile
+++ b/arch/mips/pmc-sierra/yosemite/Makefile
@@ -4,7 +4,6 @@
 
 obj-y    += irq.o prom.o py-console.o setup.o
 
-obj-$(CONFIG_KGDB)		+= dbg_io.o
 obj-$(CONFIG_SMP)		+= smp.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/pmc-sierra/yosemite/dbg_io.c b/arch/mips/pmc-sierra/yosemite/dbg_io.c
deleted file mode 100644
index 6362c70..0000000
--- a/arch/mips/pmc-sierra/yosemite/dbg_io.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * Support for KGDB for the Yosemite board. We make use of single serial
- * port to be used for KGDB as well as console. The second serial port
- * seems to be having a problem. Single IRQ is allocated for both the
- * ports. Hence, the interrupt routing code needs to figure out whether
- * the interrupt came from channel A or B.
- */
-
-#include <asm/serial.h>
-
-/*
- * Baud rate, Parity, Data and Stop bit settings for the
- * serial port on the Yosemite. Note that the Early printk
- * patch has been added. So, we should be all set to go
- */
-#define	YOSEMITE_BAUD_2400	2400
-#define	YOSEMITE_BAUD_4800	4800
-#define	YOSEMITE_BAUD_9600	9600
-#define	YOSEMITE_BAUD_19200	19200
-#define	YOSEMITE_BAUD_38400	38400
-#define	YOSEMITE_BAUD_57600	57600
-#define	YOSEMITE_BAUD_115200	115200
-
-#define	YOSEMITE_PARITY_NONE	0
-#define	YOSEMITE_PARITY_ODD	0x08
-#define	YOSEMITE_PARITY_EVEN	0x18
-#define	YOSEMITE_PARITY_MARK	0x28
-#define	YOSEMITE_PARITY_SPACE	0x38
-
-#define	YOSEMITE_DATA_5BIT	0x0
-#define	YOSEMITE_DATA_6BIT	0x1
-#define	YOSEMITE_DATA_7BIT	0x2
-#define	YOSEMITE_DATA_8BIT	0x3
-
-#define	YOSEMITE_STOP_1BIT	0x0
-#define	YOSEMITE_STOP_2BIT	0x4
-
-/* This is crucial */
-#define	SERIAL_REG_OFS		0x1
-
-#define	SERIAL_RCV_BUFFER	0x0
-#define	SERIAL_TRANS_HOLD	0x0
-#define	SERIAL_SEND_BUFFER	0x0
-#define	SERIAL_INTR_ENABLE	(1 * SERIAL_REG_OFS)
-#define	SERIAL_INTR_ID		(2 * SERIAL_REG_OFS)
-#define	SERIAL_DATA_FORMAT	(3 * SERIAL_REG_OFS)
-#define	SERIAL_LINE_CONTROL	(3 * SERIAL_REG_OFS)
-#define	SERIAL_MODEM_CONTROL	(4 * SERIAL_REG_OFS)
-#define	SERIAL_RS232_OUTPUT	(4 * SERIAL_REG_OFS)
-#define	SERIAL_LINE_STATUS	(5 * SERIAL_REG_OFS)
-#define	SERIAL_MODEM_STATUS	(6 * SERIAL_REG_OFS)
-#define	SERIAL_RS232_INPUT	(6 * SERIAL_REG_OFS)
-#define	SERIAL_SCRATCH_PAD	(7 * SERIAL_REG_OFS)
-
-#define	SERIAL_DIVISOR_LSB	(0 * SERIAL_REG_OFS)
-#define	SERIAL_DIVISOR_MSB	(1 * SERIAL_REG_OFS)
-
-/*
- * Functions to READ and WRITE to serial port 0
- */
-#define	SERIAL_READ(ofs)		(*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE + ofs)))
-
-#define	SERIAL_WRITE(ofs, val)		((*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE + ofs))) = val)
-
-/*
- * Functions to READ and WRITE to serial port 1
- */
-#define	SERIAL_READ_1(ofs)		(*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE_1 + ofs)))
-
-#define	SERIAL_WRITE_1(ofs, val)	((*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE_1 + ofs))) = val)
-
-/*
- * Second serial port initialization
- */
-void init_second_port(void)
-{
-	/* Disable Interrupts */
-	SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
-	SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0x0);
-
-	{
-		unsigned int divisor;
-
-		SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x80);
-		divisor = TITAN_SERIAL_BASE_BAUD / YOSEMITE_BAUD_115200;
-		SERIAL_WRITE_1(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
-		SERIAL_WRITE_1(SERIAL_DIVISOR_MSB,
-			       (divisor & 0xff00) >> 8);
-		SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
-	}
-
-	SERIAL_WRITE_1(SERIAL_DATA_FORMAT, YOSEMITE_DATA_8BIT |
-		       YOSEMITE_PARITY_NONE | YOSEMITE_STOP_1BIT);
-
-	/* Enable Interrupts */
-	SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0xf);
-}
-
-/* Initialize the serial port for KGDB debugging */
-void debugInit(unsigned int baud, unsigned char data, unsigned char parity,
-	       unsigned char stop)
-{
-	/* Disable Interrupts */
-	SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
-	SERIAL_WRITE(SERIAL_INTR_ENABLE, 0x0);
-
-	{
-		unsigned int divisor;
-
-		SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x80);
-
-		divisor = TITAN_SERIAL_BASE_BAUD / baud;
-		SERIAL_WRITE(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
-		SERIAL_WRITE(SERIAL_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-		SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
-	}
-
-	SERIAL_WRITE(SERIAL_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-unsigned char getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(YOSEMITE_BAUD_115200,
-			  YOSEMITE_DATA_8BIT,
-			  YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
-	}
-
-	while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x1) == 0);
-	return SERIAL_READ(SERIAL_RCV_BUFFER);
-}
-
-int putDebugChar(unsigned char byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(YOSEMITE_BAUD_115200,
-			  YOSEMITE_DATA_8BIT,
-			  YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
-	}
-
-	while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x20) == 0);
-	SERIAL_WRITE(SERIAL_SEND_BUFFER, byte);
-
-	return 1;
-}
diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c
index 4decc28..5f673eb 100644
--- a/arch/mips/pmc-sierra/yosemite/irq.c
+++ b/arch/mips/pmc-sierra/yosemite/irq.c
@@ -141,10 +141,6 @@ asmlinkage void plat_irq_dispatch(void)
 	}
 }
 
-#ifdef CONFIG_KGDB
-extern void init_second_port(void);
-#endif
-
 /*
  * Initialize the next level interrupt handler
  */
@@ -156,11 +152,6 @@ void __init arch_init_irq(void)
 	rm7k_cpu_irq_init();
 	rm9k_cpu_irq_init();
 
-#ifdef CONFIG_KGDB
-	/* At this point, initialize the second serial port */
-	init_second_port();
-#endif
-
 #ifdef CONFIG_GDB_CONSOLE
 	register_gdb_console();
 #endif
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index b2fe82d..00a1c78 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -64,7 +64,8 @@ static struct resource rb532_dev3_ctl_res[] = {
 
 void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
 {
-	unsigned flags, data;
+	unsigned long flags;
+	unsigned data;
 	unsigned i = 0;
 
 	spin_lock_irqsave(&dev3.lock, flags);
@@ -90,7 +91,7 @@ EXPORT_SYMBOL(get_434_reg);
 
 void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
 {
-	unsigned flags;
+	unsigned long flags;
 
 	spin_lock_irqsave(&dev3.lock, flags);
 
diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
index db74edf..8e7a468 100644
--- a/arch/mips/rb532/time.c
+++ b/arch/mips/rb532/time.c
@@ -49,8 +49,8 @@ static unsigned long __init cal_r4koff(void)
 
 void __init plat_time_init(void)
 {
-	unsigned int est_freq, flags;
-	unsigned long r4k_offset;
+	unsigned int est_freq;
+	unsigned long flags, r4k_offset;
 
 	local_irq_save(flags);
 
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 5f389ee..896a1ef 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -20,7 +20,6 @@
 #include <asm/irq.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
-#include <asm/gdb-stub.h>
 #include <asm/io.h>
 #include <asm/traps.h>
 #include <asm/sgialib.h>
@@ -81,30 +80,6 @@ void __init plat_mem_setup(void)
 		add_preferred_console("arc", 0, NULL);
 	}
 
-#ifdef CONFIG_KGDB
-	{
-	char *kgdb_ttyd = prom_getcmdline();
-
-	if ((kgdb_ttyd = strstr(kgdb_ttyd, "kgdb=ttyd")) != NULL) {
-		int line;
-		kgdb_ttyd += strlen("kgdb=ttyd");
-		if (*kgdb_ttyd != '1' && *kgdb_ttyd != '2')
-			printk(KERN_INFO "KGDB: Uknown serial line /dev/ttyd%c"
-			       ", falling back to /dev/ttyd1\n", *kgdb_ttyd);
-		line = *kgdb_ttyd == '2' ? 0 : 1;
-		printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
-		       "session\n", line ? 1 : 2);
-		rs_kgdb_hook(line);
-
-		printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
-		       "session, please connect your debugger\n", line ? 1:2);
-
-		kgdb_enabled = 1;
-		/* Breakpoints and stuff are in sgi_irq_setup() */
-	}
-	}
-#endif
-
 #if defined(CONFIG_VT) && defined(CONFIG_SGI_NEWPORT_CONSOLE)
 	{
 		ULONG *gfxinfo;
diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile
index e0a6871d..31f4931 100644
--- a/arch/mips/sgi-ip27/Makefile
+++ b/arch/mips/sgi-ip27/Makefile
@@ -7,7 +7,6 @@ obj-y	:= ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \
 	   ip27-xtalk.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= ip27-console.o
-obj-$(CONFIG_KGDB)		+= ip27-dbgio.o
 obj-$(CONFIG_SMP)		+= ip27-smp.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/sgi-ip27/ip27-dbgio.c b/arch/mips/sgi-ip27/ip27-dbgio.c
deleted file mode 100644
index 08fd88b..0000000
--- a/arch/mips/sgi-ip27/ip27-dbgio.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Copyright 2004 Ralf Baechle <ralf@linux-mips.org>
- */
-#include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hub.h>
-#include <asm/sn/klconfig.h>
-#include <asm/sn/ioc3.h>
-#include <asm/sn/sn_private.h>
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#define IOC3_CLK        (22000000 / 3)
-#define IOC3_FLAGS      (0)
-
-static inline struct ioc3_uartregs *console_uart(void)
-{
-	struct ioc3 *ioc3;
-
-	ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base;
-
-	return &ioc3->sregs.uarta;
-}
-
-unsigned char getDebugChar(void)
-{
-	struct ioc3_uartregs *uart = console_uart();
-
-	while ((uart->iu_lsr & UART_LSR_DR) == 0);
-	return uart->iu_rbr;
-}
-
-void putDebugChar(unsigned char c)
-{
-	struct ioc3_uartregs *uart = console_uart();
-
-	while ((uart->iu_lsr & UART_LSR_THRE) == 0);
-	uart->iu_thr = c;
-}
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index db372a0..a35818e 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -57,30 +57,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ht_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-#include <asm/gdb-stub.h>
-extern void breakpoint(void);
-static int kgdb_irq;
-#ifdef CONFIG_GDB_CONSOLE
-extern void register_gdb_console(void);
-#endif
-
-/* kgdb is on when configured.  Pass "nokgdb" kernel arg to turn it off */
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-	kgdb_flag = 0;
-	return 1;
-}
-__setup("nokgdb", nokgdb);
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip bcm1480_irq_type = {
 	.name = "BCM1480-IMR",
 	.ack = ack_bcm1480_irq,
@@ -355,61 +331,10 @@ void __init arch_init_irq(void)
 	 * does its own management of IP7.
 	 */
 
-#ifdef CONFIG_KGDB
-	imask |= STATUSF_IP6;
-#endif
 	/* Enable necessary IPs, disable the rest */
 	change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-		sb1250_duart_present[kgdb_port] = 0;
-#endif
-		/* Setup uart 1 settings, mapper */
-		/* QQQ FIXME */
-		__raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
-
-		__raw_writeq(IMR_IP6_VAL,
-			     IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
-			     (kgdb_irq << 3)));
-		bcm1480_unmask_irq(0, kgdb_irq);
-
-#ifdef CONFIG_GDB_CONSOLE
-		register_gdb_console();
-#endif
-		printk("Waiting for GDB on UART port %d\n", kgdb_port);
-		set_debug_traps();
-		breakpoint();
-	}
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void bcm1480_kgdb_interrupt(void)
-{
-	/*
-	 * Clear break-change status (allow some time for the remote
-	 * host to stop the break, since we would see another
-	 * interrupt on the end-of-break too)
-	 */
-	kstat.irqs[smp_processor_id()][kgdb_irq]++;
-	mdelay(500);
-	duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-				M_DUART_RX_EN | M_DUART_TX_EN);
-	set_async_breakpoint(&get_irq_regs()->cp0_epc);
 }
 
-#endif 	/* CONFIG_KGDB */
-
 extern void bcm1480_mailbox_interrupt(void);
 
 static inline void dispatch_ip2(void)
@@ -462,11 +387,6 @@ asmlinkage void plat_irq_dispatch(void)
 		bcm1480_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-	else if (pending & CAUSEF_IP6)
-		bcm1480_kgdb_interrupt();		/* KGDB (uart 1) */
-#endif
-
 	else if (pending & CAUSEF_IP2)
 		dispatch_ip2();
 }
diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c
index fd9604d..3de30f7 100644
--- a/arch/mips/sibyte/cfe/setup.c
+++ b/arch/mips/sibyte/cfe/setup.c
@@ -59,10 +59,6 @@ int cfe_cons_handle;
 extern unsigned long initrd_start, initrd_end;
 #endif
 
-#ifdef CONFIG_KGDB
-extern int kgdb_port;
-#endif
-
 static void __noreturn cfe_linux_exit(void *arg)
 {
 	int warm = *(int *)arg;
@@ -246,9 +242,6 @@ void __init prom_init(void)
 	int argc = fw_arg0;
 	char **envp = (char **) fw_arg2;
 	int *prom_vec = (int *) fw_arg3;
-#ifdef CONFIG_KGDB
-	char *arg;
-#endif
 
 	_machine_restart   = cfe_linux_restart;
 	_machine_halt      = cfe_linux_halt;
@@ -309,13 +302,6 @@ void __init prom_init(void)
 		}
 	}
 
-#ifdef CONFIG_KGDB
-	if ((arg = strstr(arcs_cmdline, "kgdb=duart")) != NULL)
-		kgdb_port = (arg[10] == '0') ? 0 : 1;
-	else
-		kgdb_port = 1;
-#endif
-
 #ifdef CONFIG_BLK_DEV_INITRD
 	{
 		char *ptr;
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index eac9065..a515848 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -57,16 +57,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ldt_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-static int kgdb_irq;
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip sb1250_irq_type = {
 	.name = "SB1250-IMR",
 	.ack = ack_sb1250_irq,
@@ -313,55 +303,10 @@ void __init arch_init_irq(void)
 	 * does its own management of IP7.
 	 */
 
-#ifdef CONFIG_KGDB
-	imask |= STATUSF_IP6;
-#endif
 	/* Enable necessary IPs, disable the rest */
 	change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		kgdb_irq = K_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-		sb1250_duart_present[kgdb_port] = 0;
-#endif
-		/* Setup uart 1 settings, mapper */
-		__raw_writeq(M_DUART_IMR_BRK,
-			     IOADDR(A_DUART_IMRREG(kgdb_port)));
-
-		__raw_writeq(IMR_IP6_VAL,
-			     IOADDR(A_IMR_REGISTER(0,
-						   R_IMR_INTERRUPT_MAP_BASE) +
-				    (kgdb_irq << 3)));
-		sb1250_unmask_irq(0, kgdb_irq);
-	}
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void sb1250_kgdb_interrupt(void)
-{
-	/*
-	 * Clear break-change status (allow some time for the remote
-	 * host to stop the break, since we would see another
-	 * interrupt on the end-of-break too)
-	 */
-	kstat_this_cpu.irqs[kgdb_irq]++;
-	mdelay(500);
-	duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-				M_DUART_RX_EN | M_DUART_TX_EN);
-	set_async_breakpoint(&get_irq_regs()->cp0_epc);
 }
 
-#endif 	/* CONFIG_KGDB */
-
 extern void sb1250_mailbox_interrupt(void);
 
 static inline void dispatch_ip2(void)
@@ -407,11 +352,6 @@ asmlinkage void plat_irq_dispatch(void)
 		sb1250_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-	else if (pending & CAUSEF_IP6)			/* KGDB (uart 1) */
-		sb1250_kgdb_interrupt();
-#endif
-
 	else if (pending & CAUSEF_IP2)
 		dispatch_ip2();
 	else
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
index 255d692..f18ba92 100644
--- a/arch/mips/sibyte/swarm/Makefile
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -1,4 +1,3 @@
 obj-y				:= setup.o rtc_xicor1241.o rtc_m41t81.o
 
 obj-$(CONFIG_I2C_BOARDINFO)	+= swarm-i2c.o
-obj-$(CONFIG_KGDB)		+= dbg_io.o
diff --git a/arch/mips/sibyte/swarm/dbg_io.c b/arch/mips/sibyte/swarm/dbg_io.c
deleted file mode 100644
index b97ae30..0000000
--- a/arch/mips/sibyte/swarm/dbg_io.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * kgdb debug routines for SiByte boards.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-/* -------------------- BEGINNING OF CONFIG --------------------- */
-
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_uart.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/addrspace.h>
-
-/*
- * We use the second serial port for kgdb traffic.
- * 	115200, 8, N, 1.
- */
-
-#define	BAUD_RATE		115200
-#define	CLK_DIVISOR		V_DUART_BAUD_RATE(BAUD_RATE)
-#define	DATA_BITS		V_DUART_BITS_PER_CHAR_8		/* or 7    */
-#define	PARITY			V_DUART_PARITY_MODE_NONE	/* or even */
-#define	STOP_BITS		M_DUART_STOP_BIT_LEN_1		/* or 2    */
-
-static int duart_initialized = 0;	/* 0: need to be init'ed by kgdb */
-
-/* -------------------- END OF CONFIG --------------------- */
-extern int kgdb_port;
-
-#define	duart_out(reg, val)	csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)		csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-void putDebugChar(unsigned char c);
-unsigned char getDebugChar(void);
-static void
-duart_init(int clk_divisor, int data, int parity, int stop)
-{
-	duart_out(R_DUART_MODE_REG_1, data | parity);
-	duart_out(R_DUART_MODE_REG_2, stop);
-	duart_out(R_DUART_CLK_SEL, clk_divisor);
-
-	duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN);	/* enable rx and tx */
-}
-
-void
-putDebugChar(unsigned char c)
-{
-	if (!duart_initialized) {
-		duart_initialized = 1;
-		duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
-	}
-	while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0);
-	duart_out(R_DUART_TX_HOLD, c);
-}
-
-unsigned char
-getDebugChar(void)
-{
-	if (!duart_initialized) {
-		duart_initialized = 1;
-		duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
-	}
-	while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ;
-	return duart_in(R_DUART_RX_HOLD);
-}
-
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 6de4c5a..840fe75 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -1,3 +1,27 @@
+config MACH_TX39XX
+	bool
+	select MACH_TXX9
+	select SYS_HAS_CPU_TX39XX
+
+config MACH_TX49XX
+	bool
+	select MACH_TXX9
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select SYS_HAS_CPU_TX49XX
+	select SYS_SUPPORTS_64BIT_KERNEL
+
+config MACH_TXX9
+	bool
+	select DMA_NONCOHERENT
+	select SWAP_IO_SPACE
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+
 config TOSHIBA_JMR3927
 	bool "Toshiba JMR-TX3927 board"
 	depends on MACH_TX39XX
@@ -24,68 +48,37 @@ config TOSHIBA_RBTX4938
 config SOC_TX3927
 	bool
 	select CEVT_TXX9
-	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
 	select IRQ_TXX9
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX39XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GPIO_TXX9
 
 config SOC_TX4927
 	bool
-	select CEVT_R4K
-	select CSRC_R4K
 	select CEVT_TXX9
-	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
-	select IRQ_CPU
 	select IRQ_TXX9
 	select PCI_TX4927
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX49XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GPIO_TXX9
 
 config SOC_TX4938
 	bool
-	select CEVT_R4K
-	select CSRC_R4K
 	select CEVT_TXX9
-	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
-	select IRQ_CPU
 	select IRQ_TXX9
 	select PCI_TX4927
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX49XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GPIO_TXX9
 
 config TOSHIBA_FPCIB0
 	bool "FPCIB0 Backplane Support"
-	depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+	depends on PCI && MACH_TXX9
 	select I8259
 
 config PICMG_PCI_BACKPLANE_DEFAULT
 	bool "Support for PICMG PCI Backplane"
-	depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+	depends on PCI && MACH_TXX9
 	default y if !TOSHIBA_FPCIB0
 
 if TOSHIBA_RBTX4938
diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile
index 9c12077..9bb34af 100644
--- a/arch/mips/txx9/generic/Makefile
+++ b/arch/mips/txx9/generic/Makefile
@@ -4,9 +4,9 @@
 
 obj-y	+= setup.o
 obj-$(CONFIG_PCI)	+= pci.o
+obj-$(CONFIG_SOC_TX3927)	+= setup_tx3927.o irq_tx3927.o
 obj-$(CONFIG_SOC_TX4927)	+= mem_tx4927.o setup_tx4927.o irq_tx4927.o
 obj-$(CONFIG_SOC_TX4938)	+= mem_tx4927.o setup_tx4938.o irq_tx4938.o
 obj-$(CONFIG_TOSHIBA_FPCIB0)	+= smsc_fdc37m81x.o
-obj-$(CONFIG_KGDB)	+= dbgio.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/generic/dbgio.c b/arch/mips/txx9/generic/dbgio.c
deleted file mode 100644
index 33b9c67..0000000
--- a/arch/mips/txx9/generic/dbgio.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/mips/tx4938/common/dbgio.c
- *
- * kgdb interface for gdb
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2005 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp>
- */
-
-#include <linux/types>
-
-extern u8 txx9_sio_kdbg_rd(void);
-extern int txx9_sio_kdbg_wr( u8 ch );
-
-u8 getDebugChar(void)
-{
-	return (txx9_sio_kdbg_rd());
-}
-
-int putDebugChar(u8 byte)
-{
-	return (txx9_sio_kdbg_wr(byte));
-}
-
diff --git a/arch/mips/txx9/generic/irq_tx3927.c b/arch/mips/txx9/generic/irq_tx3927.c
new file mode 100644
index 0000000..c683f59
--- /dev/null
+++ b/arch/mips/txx9/generic/irq_tx3927.c
@@ -0,0 +1,25 @@
+/*
+ * Common tx3927 irq handler
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ */
+#include <linux/init.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_irq_init(void)
+{
+	int i;
+
+	txx9_irq_init(TX3927_IRC_REG);
+	/* raise priority for timers, sio */
+	for (i = 0; i < TX3927_NR_TMR; i++)
+		txx9_irq_set_pri(TX3927_IR_TMR(i), 6);
+	for (i = 0; i < TX3927_NR_SIO; i++)
+		txx9_irq_set_pri(TX3927_IR_SIO(i), 7);
+}
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 0b92d8c..7b637a7 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -386,3 +386,39 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return txx9_board_vec->pci_map_irq(dev, slot, pin);
 }
+
+char * (*txx9_board_pcibios_setup)(char *str) __devinitdata;
+
+char *__devinit txx9_pcibios_setup(char *str)
+{
+	if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str))
+		return NULL;
+	if (!strcmp(str, "picmg")) {
+		/* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX
+		   (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */
+		txx9_pci_option |= TXX9_PCI_OPT_PICMG;
+		return NULL;
+	} else if (!strcmp(str, "nopicmg")) {
+		/* non-PICMG compliant backplane (TOSHIBA
+		   RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */
+		txx9_pci_option &= ~TXX9_PCI_OPT_PICMG;
+		return NULL;
+	} else if (!strncmp(str, "clk=", 4)) {
+		char *val = str + 4;
+		txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK;
+		if (strcmp(val, "33") == 0)
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_33;
+		else if (strcmp(val, "66") == 0)
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_66;
+		else /* "auto" */
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO;
+		return NULL;
+	} else if (!strncmp(str, "err=", 4)) {
+		if (!strcmp(str + 4, "panic"))
+			txx9_pci_err_action = TXX9_PCI_ERR_PANIC;
+		else if (!strcmp(str + 4, "ignore"))
+			txx9_pci_err_action = TXX9_PCI_ERR_IGNORE;
+		return NULL;
+	}
+	return str;
+}
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 8c60c78..1bc57d0 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -20,9 +20,13 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
+#include <asm/reboot.h>
 #include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
 #ifdef CONFIG_CPU_TX49XX
 #include <asm/txx9/tx4938.h>
 #endif
@@ -187,6 +191,117 @@ char * __init prom_getcmdline(void)
 	return &(arcs_cmdline[0]);
 }
 
+static void __noreturn txx9_machine_halt(void)
+{
+	local_irq_disable();
+	clear_c0_status(ST0_IM);
+	while (1) {
+		if (cpu_wait) {
+			(*cpu_wait)();
+			if (cpu_has_counter) {
+				/*
+				 * Clear counter interrupt while it
+				 * breaks WAIT instruction even if
+				 * masked.
+				 */
+				write_c0_compare(0);
+			}
+		}
+	}
+}
+
+/* Watchdog support */
+void __init txx9_wdt_init(unsigned long base)
+{
+	struct resource res = {
+		.start	= base,
+		.end	= base + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	platform_device_register_simple("txx9wdt", -1, &res, 1);
+}
+
+/* SPI support */
+void __init txx9_spi_init(int busid, unsigned long base, int irq)
+{
+	struct resource res[] = {
+		{
+			.start	= base,
+			.end	= base + 0x20 - 1,
+			.flags	= IORESOURCE_MEM,
+		}, {
+			.start	= irq,
+			.flags	= IORESOURCE_IRQ,
+		},
+	};
+	platform_device_register_simple("spi_txx9", busid,
+					res, ARRAY_SIZE(res));
+}
+
+void __init txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr)
+{
+	struct platform_device *pdev =
+		platform_device_alloc("tc35815-mac", id);
+	if (!pdev ||
+	    platform_device_add_data(pdev, ethaddr, 6) ||
+	    platform_device_add(pdev))
+		platform_device_put(pdev);
+}
+
+void __init txx9_sio_init(unsigned long baseaddr, int irq,
+			  unsigned int line, unsigned int sclk, int nocts)
+{
+#ifdef CONFIG_SERIAL_TXX9
+	struct uart_port req;
+
+	memset(&req, 0, sizeof(req));
+	req.line = line;
+	req.iotype = UPIO_MEM;
+	req.membase = ioremap(baseaddr, 0x24);
+	req.mapbase = baseaddr;
+	req.irq = irq;
+	if (!nocts)
+		req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+	if (sclk) {
+		req.flags |= UPF_MAGIC_MULTIPLIER /*USE_SCLK*/;
+		req.uartclk = sclk;
+	} else
+		req.uartclk = TXX9_IMCLK;
+	early_serial_txx9_setup(&req);
+#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+#ifdef CONFIG_EARLY_PRINTK
+static void __init null_prom_putchar(char c)
+{
+}
+void (*txx9_prom_putchar)(char c) __initdata = null_prom_putchar;
+
+void __init prom_putchar(char c)
+{
+	txx9_prom_putchar(c);
+}
+
+static void __iomem *early_txx9_sio_port;
+
+static void __init early_txx9_sio_putchar(char c)
+{
+#define TXX9_SICISR	0x0c
+#define TXX9_SITFIFO	0x1c
+#define TXX9_SICISR_TXALS	0x00000002
+	while (!(__raw_readl(early_txx9_sio_port + TXX9_SICISR) &
+		 TXX9_SICISR_TXALS))
+		;
+	__raw_writel(c, early_txx9_sio_port + TXX9_SITFIFO);
+}
+
+void __init txx9_sio_putchar_init(unsigned long baseaddr)
+{
+	early_txx9_sio_port = ioremap(baseaddr, 0x24);
+	txx9_prom_putchar = early_txx9_sio_putchar;
+}
+#endif /* CONFIG_EARLY_PRINTK */
+
 /* wrappers */
 void __init plat_mem_setup(void)
 {
@@ -194,6 +309,15 @@ void __init plat_mem_setup(void)
 	ioport_resource.end = ~0UL;	/* no limit */
 	iomem_resource.start = 0;
 	iomem_resource.end = ~0UL;	/* no limit */
+
+	/* fallback restart/halt routines */
+	_machine_restart = (void (*)(char *))txx9_machine_halt;
+	_machine_halt = txx9_machine_halt;
+	pm_power_off = txx9_machine_halt;
+
+#ifdef CONFIG_PCI
+	pcibios_plat_setup = txx9_pcibios_setup;
+#endif
 	txx9_board_vec->mem_setup();
 }
 
diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c
new file mode 100644
index 0000000..7bd963d
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx3927.c
@@ -0,0 +1,130 @@
+/*
+ * TX3927 setup routines
+ * Based on linux/arch/mips/txx9/jmr3927/setup.c
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/param.h>
+#include <linux/io.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_wdt_init(void)
+{
+	txx9_wdt_init(TX3927_TMR_REG(2));
+}
+
+void __init tx3927_setup(void)
+{
+	int i;
+	unsigned int conf;
+
+	/* don't enable - see errata */
+	txx9_ccfg_toeon = 0;
+	if (strstr(prom_getcmdline(), "toeon") != NULL)
+		txx9_ccfg_toeon = 1;
+
+	txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE,
+			  TX3927_REG_SIZE);
+
+	/* SDRAMC,ROMC are configured by PROM */
+	for (i = 0; i < 8; i++) {
+		if (!(tx3927_romcptr->cr[i] & 0x8))
+			continue;	/* disabled */
+		txx9_ce_res[i].start = (unsigned long)TX3927_ROMC_BA(i);
+		txx9_ce_res[i].end =
+			txx9_ce_res[i].start + TX3927_ROMC_SIZE(i) - 1;
+		request_resource(&iomem_resource, &txx9_ce_res[i]);
+	}
+
+	/* clocks */
+	txx9_gbus_clock = txx9_cpu_clock / 2;
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	/* enable Timeout BusError */
+	if (txx9_ccfg_toeon)
+		tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
+
+	/* clear BusErrorOnWrite flag */
+	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
+	if (read_c0_conf() & TX39_CONF_WBON)
+		/* Disable PCI snoop */
+		tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
+	else
+		/* Enable PCI SNOOP - with write through only */
+		tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
+	/* do reset on watchdog */
+	tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
+
+	printk(KERN_INFO "TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
+	       tx3927_ccfgptr->crir,
+	       tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
+
+	/* TMR */
+	for (i = 0; i < TX3927_NR_TMR; i++)
+		txx9_tmr_init(TX3927_TMR_REG(i));
+
+	/* DMA */
+	tx3927_dmaptr->mcr = 0;
+	for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
+		/* reset channel */
+		tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
+		tx3927_dmaptr->ch[i].ccr = 0;
+	}
+	/* enable DMA */
+#ifdef __BIG_ENDIAN
+	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
+#else
+	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
+#endif
+
+	/* PIO */
+	__raw_writel(0, &tx3927_pioptr->maskcpu);
+	__raw_writel(0, &tx3927_pioptr->maskext);
+	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
+
+	conf = read_c0_conf();
+	if (!(conf & TX39_CONF_ICE))
+		printk(KERN_INFO "TX3927 I-Cache disabled.\n");
+	if (!(conf & TX39_CONF_DCE))
+		printk(KERN_INFO "TX3927 D-Cache disabled.\n");
+	else if (!(conf & TX39_CONF_WBON))
+		printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n");
+	else if (!(conf & TX39_CONF_CWFON))
+		printk(KERN_INFO "TX3927 D-Cache WriteBack.\n");
+	else
+		printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n");
+}
+
+void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr)
+{
+	txx9_clockevent_init(TX3927_TMR_REG(evt_tmrnr),
+			     TXX9_IRQ_BASE + TX3927_IR_TMR(evt_tmrnr),
+			     TXX9_IMCLK);
+	txx9_clocksource_init(TX3927_TMR_REG(src_tmrnr), TXX9_IMCLK);
+}
+
+void __init tx3927_sio_init(unsigned int sclk, unsigned int cts_mask)
+{
+	int i;
+
+	for (i = 0; i < 2; i++)
+		txx9_sio_init(TX3927_SIO_REG(i),
+			      TXX9_IRQ_BASE + TX3927_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
+}
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index 89d6e28..f80d4b7 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/serial_core.h>
 #include <linux/param.h>
 #include <asm/txx9irq.h>
 #include <asm/txx9tmr.h>
@@ -21,7 +20,7 @@
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4927.h>
 
-void __init tx4927_wdr_init(void)
+static void __init tx4927_wdr_init(void)
 {
 	/* clear WatchDogReset (W1C) */
 	tx4927_ccfg_set(TX4927_CCFG_WDRST);
@@ -29,6 +28,11 @@ void __init tx4927_wdr_init(void)
 	tx4927_ccfg_set(TX4927_CCFG_WR);
 }
 
+void __init tx4927_wdt_init(void)
+{
+	txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+}
+
 static struct resource tx4927_sdram_resource[4];
 
 void __init tx4927_setup(void)
@@ -173,22 +177,12 @@ void __init tx4927_time_init(unsigned int tmrnr)
 				     TXX9_IMCLK);
 }
 
-void __init tx4927_setup_serial(void)
+void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask)
 {
-#ifdef CONFIG_SERIAL_TXX9
 	int i;
-	struct uart_port req;
-
-	for (i = 0; i < 2; i++) {
-		memset(&req, 0, sizeof(req));
-		req.line = i;
-		req.iotype = UPIO_MEM;
-		req.membase = (unsigned char __iomem *)TX4927_SIO_REG(i);
-		req.mapbase = TX4927_SIO_REG(i) & 0xfffffffffULL;
-		req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i);
-		req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-		req.uartclk = TXX9_IMCLK;
-		early_serial_txx9_setup(&req);
-	}
-#endif /* CONFIG_SERIAL_TXX9 */
+
+	for (i = 0; i < 2; i++)
+		txx9_sio_init(TX4927_SIO_REG(i) & 0xfffffffffULL,
+			      TXX9_IRQ_BASE + TX4927_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
 }
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index 317378d..f3040b9 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/serial_core.h>
 #include <linux/param.h>
 #include <asm/txx9irq.h>
 #include <asm/txx9tmr.h>
@@ -21,7 +20,7 @@
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4938.h>
 
-void __init tx4938_wdr_init(void)
+static void __init tx4938_wdr_init(void)
 {
 	/* clear WatchDogReset (W1C) */
 	tx4938_ccfg_set(TX4938_CCFG_WDRST);
@@ -29,6 +28,11 @@ void __init tx4938_wdr_init(void)
 	tx4938_ccfg_set(TX4938_CCFG_WR);
 }
 
+void __init tx4938_wdt_init(void)
+{
+	txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
+}
+
 static struct resource tx4938_sdram_resource[4];
 static struct resource tx4938_sram_resource;
 
@@ -233,11 +237,9 @@ void __init tx4938_time_init(unsigned int tmrnr)
 				     TXX9_IMCLK);
 }
 
-void __init tx4938_setup_serial(void)
+void __init tx4938_sio_init(unsigned int sclk, unsigned int cts_mask)
 {
-#ifdef CONFIG_SERIAL_TXX9
 	int i;
-	struct uart_port req;
 	unsigned int ch_mask = 0;
 
 	if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_ETH0_SEL)
@@ -245,15 +247,24 @@ void __init tx4938_setup_serial(void)
 	for (i = 0; i < 2; i++) {
 		if ((1 << i) & ch_mask)
 			continue;
-		memset(&req, 0, sizeof(req));
-		req.line = i;
-		req.iotype = UPIO_MEM;
-		req.membase = (unsigned char __iomem *)TX4938_SIO_REG(i);
-		req.mapbase = TX4938_SIO_REG(i) & 0xfffffffffULL;
-		req.irq = TXX9_IRQ_BASE + TX4938_IR_SIO(i);
-		req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-		req.uartclk = TXX9_IMCLK;
-		early_serial_txx9_setup(&req);
+		txx9_sio_init(TX4938_SIO_REG(i) & 0xfffffffffULL,
+			      TXX9_IRQ_BASE + TX4938_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
 	}
-#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+void __init tx4938_spi_init(int busid)
+{
+	txx9_spi_init(busid, TX4938_SPI_REG & 0xfffffffffULL,
+		      TXX9_IRQ_BASE + TX4938_IR_SPI);
+}
+
+void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1)
+{
+	u64 pcfg = __raw_readq(&tx4938_ccfgptr->pcfg);
+
+	if (addr0 && (pcfg & TX4938_PCFG_ETH0_SEL))
+		txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH0, addr0);
+	if (addr1 && (pcfg & TX4938_PCFG_ETH1_SEL))
+		txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH1, addr1);
 }
diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c
index 69e4874..a2b2d62 100644
--- a/arch/mips/txx9/generic/smsc_fdc37m81x.c
+++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c
@@ -15,8 +15,6 @@
 #include <asm/io.h>
 #include <asm/txx9/smsc_fdc37m81x.h>
 
-#define DEBUG
-
 /* Common Registers */
 #define SMSC_FDC37M81X_CONFIG_INDEX  0x00
 #define SMSC_FDC37M81X_CONFIG_DATA   0x01
@@ -55,7 +53,7 @@
 #define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
 #define SMSC_FDC37M81X_CHIP_ID       0x4d
 
-static unsigned long g_smsc_fdc37m81x_base = 0;
+static unsigned long g_smsc_fdc37m81x_base;
 
 static inline unsigned char smsc_fdc37m81x_rd(unsigned char index)
 {
@@ -107,7 +105,8 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 	u8 chip_id;
 
 	if (g_smsc_fdc37m81x_base)
-		printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n",
+		printk(KERN_WARNING "%s: stepping on old base=0x%0*lx\n",
+		       __func__,
 		       field, g_smsc_fdc37m81x_base);
 
 	g_smsc_fdc37m81x_base = port;
@@ -118,7 +117,7 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 	if (chip_id == SMSC_FDC37M81X_CHIP_ID)
 		smsc_fdc37m81x_config_end();
 	else {
-		printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n",
+		printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__,
 		       chip_id);
 		g_smsc_fdc37m81x_base = 0;
 	}
@@ -127,22 +126,23 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 }
 
 #ifdef DEBUG
-void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg)
+static void smsc_fdc37m81x_config_dump_one(const char *key, u8 dev, u8 reg)
 {
-	printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg,
+	printk(KERN_INFO "%s: dev=0x%02x reg=0x%02x val=0x%02x\n",
+	       key, dev, reg,
 	       smsc_fdc37m81x_rd(reg));
 }
 
 void smsc_fdc37m81x_config_dump(void)
 {
 	u8 orig;
-	char *fname = "smsc_fdc37m81x_config_dump()";
+	const char *fname = __func__;
 
 	smsc_fdc37m81x_config_beg();
 
 	orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM);
 
-	printk("%s: common\n", fname);
+	printk(KERN_INFO "%s: common\n", fname);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
 				       SMSC_FDC37M81X_DNUM);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
@@ -154,7 +154,7 @@ void smsc_fdc37m81x_config_dump(void)
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
 				       SMSC_FDC37M81X_PMGT);
 
-	printk("%s: keyboard\n", fname);
+	printk(KERN_INFO "%s: keyboard\n", fname);
 	smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
 				       SMSC_FDC37M81X_ACTIVE);
diff --git a/arch/mips/txx9/jmr3927/Makefile b/arch/mips/txx9/jmr3927/Makefile
index ba292c9..20d61ac 100644
--- a/arch/mips/txx9/jmr3927/Makefile
+++ b/arch/mips/txx9/jmr3927/Makefile
@@ -3,6 +3,5 @@
 #
 
 obj-y	+= prom.o irq.o setup.o
-obj-$(CONFIG_KGDB)	+= kgdb_io.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c
index 070c9a1..6ec626c 100644
--- a/arch/mips/txx9/jmr3927/irq.c
+++ b/arch/mips/txx9/jmr3927/irq.c
@@ -30,15 +30,11 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/init.h>
-#include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
 
 #include <asm/io.h>
 #include <asm/mipsregs.h>
-#include <asm/system.h>
-
-#include <asm/processor.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/jmr3927.h>
 
@@ -46,13 +42,6 @@
 #error JMR3927_IRQ_END > NR_IRQS
 #endif
 
-static unsigned char irc_level[TX3927_NUM_IR] = {
-	5, 5, 5, 5, 5, 5,	/* INT[5:0] */
-	7, 7,			/* SIO */
-	5, 5, 5, 0, 0,		/* DMA, PIO, PCI */
-	6, 6, 6			/* TMR */
-};
-
 /*
  * CP0_STATUS is a thread's resource (saved/restored on context switch).
  * So disable_irq/enable_irq MUST handle IOC/IRC registers.
@@ -103,26 +92,18 @@ static int jmr3927_irq_dispatch(int pending)
 	return irq;
 }
 
-#ifdef CONFIG_PCI
-static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id)
-{
-	printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq);
-	printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
-	       tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
-
-	return IRQ_HANDLED;
-}
-static struct irqaction pcierr_action = {
-	.handler = jmr3927_pcierr_interrupt,
-	.mask = CPU_MASK_NONE,
-	.name = "PCI error",
+static struct irq_chip jmr3927_irq_ioc = {
+	.name = "jmr3927_ioc",
+	.ack = mask_irq_ioc,
+	.mask = mask_irq_ioc,
+	.mask_ack = mask_irq_ioc,
+	.unmask = unmask_irq_ioc,
 };
-#endif
-
-static void __init jmr3927_irq_init(void);
 
 void __init jmr3927_irq_setup(void)
 {
+	int i;
+
 	txx9_irq_dispatch = jmr3927_irq_dispatch;
 	/* Now, interrupt control disabled, */
 	/* all IRC interrupts are masked, */
@@ -138,34 +119,10 @@ void __init jmr3927_irq_setup(void)
 	/* clear PCI Reset interrupts */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 
-	jmr3927_irq_init();
+	tx3927_irq_init();
+	for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
+		set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
 
 	/* setup IOC interrupt 1 (PCI, MODEM) */
 	set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq);
-
-#ifdef CONFIG_PCI
-	setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action);
-#endif
-
-	/* enable all CPU interrupt bits. */
-	set_c0_status(ST0_IM);	/* IE bit is still 0. */
-}
-
-static struct irq_chip jmr3927_irq_ioc = {
-	.name = "jmr3927_ioc",
-	.ack = mask_irq_ioc,
-	.mask = mask_irq_ioc,
-	.mask_ack = mask_irq_ioc,
-	.unmask = unmask_irq_ioc,
-};
-
-static void __init jmr3927_irq_init(void)
-{
-	u32 i;
-
-	txx9_irq_init(TX3927_IRC_REG);
-	for (i = 0; i < TXx9_MAX_IR; i++)
-		txx9_irq_set_pri(i, irc_level[i]);
-	for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
-		set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
 }
diff --git a/arch/mips/txx9/jmr3927/kgdb_io.c b/arch/mips/txx9/jmr3927/kgdb_io.c
deleted file mode 100644
index 5bd757e..0000000
--- a/arch/mips/txx9/jmr3927/kgdb_io.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Low level uart routines to directly access a TX[34]927 SIO.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ahennessy@mvista.com or source@mvista.com
- *
- * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/txx9/jmr3927.h>
-
-#define TIMEOUT       0xffffff
-
-static int remoteDebugInitialized = 0;
-static void debugInit(int baud);
-
-int putDebugChar(unsigned char c)
-{
-        int i = 0;
-
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(38400);
-	}
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS));
-	tx3927_sioptr(0)->tfifo = c;
-
-	return 1;
-}
-
-unsigned char getDebugChar(void)
-{
-        int i = 0;
-	int dicr;
-	char c;
-
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(38400);
-	}
-
-	/* diable RX int. */
-	dicr = tx3927_sioptr(0)->dicr;
-	tx3927_sioptr(0)->dicr = 0;
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID)
-		;
-	c = tx3927_sioptr(0)->rfifo;
-
-	/* clear RX int. status */
-	tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS;
-	/* enable RX int. */
-	tx3927_sioptr(0)->dicr = dicr;
-
-	return c;
-}
-
-static void debugInit(int baud)
-{
-	tx3927_sioptr(0)->lcr = 0x020;
-	tx3927_sioptr(0)->dicr = 0;
-	tx3927_sioptr(0)->disr = 0x4100;
-	tx3927_sioptr(0)->cisr = 0x014;
-	tx3927_sioptr(0)->fcr = 0;
-	tx3927_sioptr(0)->flcr = 0x02;
-	tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) |
-		TXx927_SIBGR_BCLK_T0;
-}
diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c
index 2cadb42..70c4c8e 100644
--- a/arch/mips/txx9/jmr3927/prom.c
+++ b/arch/mips/txx9/jmr3927/prom.c
@@ -36,41 +36,18 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <asm/bootinfo.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/jmr3927.h>
 
-#define TIMEOUT       0xffffff
-
-void
-prom_putchar(char c)
-{
-        int i = 0;
-
-        do {
-            i++;
-            if (i>TIMEOUT)
-                break;
-        } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
-	tx3927_sioptr(1)->tfifo = c;
-	return;
-}
-
-void
-puts(const char *cp)
-{
-    while (*cp)
-	prom_putchar(*cp++);
-    prom_putchar('\r');
-    prom_putchar('\n');
-}
-
 void __init jmr3927_prom_init(void)
 {
 	/* CCFG */
 	if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
-		puts("Warning: TX3927 TLB off\n");
+		printk(KERN_ERR "TX3927 TLB off\n");
 
 	prom_init_cmdline();
 	add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX3927_SIO_REG(1));
 }
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index 03647eb..87db41b 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -32,27 +32,18 @@
 #include <linux/types.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-#include <asm/txx9tmr.h>
-#include <asm/txx9pio.h>
 #include <asm/reboot.h>
+#include <asm/txx9pio.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
 #include <asm/txx9/jmr3927.h>
 #include <asm/mipsregs.h>
 
-extern void puts(const char *cp);
-
-/* don't enable - see errata */
-static int jmr3927_ccfg_toeon;
-
-static inline void do_reset(void)
+static void jmr3927_machine_restart(char *command)
 {
+	local_irq_disable();
 #if 1	/* Resetting PCI bus */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 	jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR);
@@ -61,33 +52,13 @@ static inline void do_reset(void)
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 #endif
 	jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR);
-}
-
-static void jmr3927_machine_restart(char *command)
-{
-	local_irq_disable();
-	puts("Rebooting...");
-	do_reset();
-}
-
-static void jmr3927_machine_halt(void)
-{
-	puts("JMR-TX3927 halted.\n");
-	while (1);
-}
-
-static void jmr3927_machine_power_off(void)
-{
-	puts("JMR-TX3927 halted. Please turn off the power.\n");
-	while (1);
+	/* fallback */
+	(*_machine_halt)();
 }
 
 static void __init jmr3927_time_init(void)
 {
-	txx9_clockevent_init(TX3927_TMR_REG(0),
-			     TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
-			     JMR3927_IMCLK);
-	txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK);
+	tx3927_time_init(0, 1);
 }
 
 #define DO_WRITE_THROUGH
@@ -102,11 +73,6 @@ static void __init jmr3927_mem_setup(void)
 	set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
 
 	_machine_restart = jmr3927_machine_restart;
-	_machine_halt = jmr3927_machine_halt;
-	pm_power_off = jmr3927_machine_power_off;
-
-	/* Reboot on panic */
-	panic_timeout = 180;
 
 	/* cache setup */
 	{
@@ -125,7 +91,8 @@ static void __init jmr3927_mem_setup(void)
 #endif
 
 		conf = read_c0_conf();
-		conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON);
+		conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE |
+			  TX39_CONF_WBON | TX39_CONF_CWFON);
 		conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
 		conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
 		conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
@@ -138,47 +105,14 @@ static void __init jmr3927_mem_setup(void)
 	/* initialize board */
 	jmr3927_board_init();
 
-	argptr = prom_getcmdline();
-
-	if ((argptr = strstr(argptr, "toeon")) != NULL)
-		jmr3927_ccfg_toeon = 1;
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "ip=")) == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " ip=bootp");
-	}
-
-#ifdef CONFIG_SERIAL_TXX9
-	{
-		extern int early_serial_txx9_setup(struct uart_port *port);
-		int i;
-		struct uart_port req;
-		for(i = 0; i < 2; i++) {
-			memset(&req, 0, sizeof(req));
-			req.line = i;
-			req.iotype = UPIO_MEM;
-			req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i);
-			req.mapbase = TX3927_SIO_REG(i);
-			req.irq = i == 0 ?
-				JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
-			if (i == 0)
-				req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-			req.uartclk = JMR3927_IMCLK;
-			early_serial_txx9_setup(&req);
-		}
-	}
+	tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
 	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "console=")) == NULL) {
-		argptr = prom_getcmdline();
+	if (!strstr(argptr, "console="))
 		strcat(argptr, " console=ttyS1,115200");
-	}
-#endif
 #endif
 }
 
-static void tx3927_setup(void);
-
 static void __init jmr3927_pci_setup(void)
 {
 #ifdef CONFIG_PCI
@@ -199,32 +133,13 @@ static void __init jmr3927_pci_setup(void)
 		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 	}
 	tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb);
+	tx3927_setup_pcierr_irq();
 #endif /* CONFIG_PCI */
 }
 
 static void __init jmr3927_board_init(void)
 {
-	tx3927_setup();
-	jmr3927_pci_setup();
-
-	/* SIO0 DTR on */
-	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
-
-	jmr3927_led_set(0);
-
-	printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
-	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
-	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
-	       jmr3927_dipsw1(), jmr3927_dipsw2(),
-	       jmr3927_dipsw3(), jmr3927_dipsw4());
-}
-
-static void __init tx3927_setup(void)
-{
-	int i;
-
 	txx9_cpu_clock = JMR3927_CORECLK;
-	txx9_gbus_clock = JMR3927_GBUSCLK;
 	/* SDRAMC are configured by PROM */
 
 	/* ROMC */
@@ -233,74 +148,32 @@ static void __init tx3927_setup(void)
 	tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698;
 	tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218;
 
-	/* CCFG */
-	/* enable Timeout BusError */
-	if (jmr3927_ccfg_toeon)
-		tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
-
-	/* clear BusErrorOnWrite flag */
-	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
-	/* Disable PCI snoop */
-	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
-	/* do reset on watchdog */
-	tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
-
-#ifdef DO_WRITE_THROUGH
-	/* Enable PCI SNOOP - with write through only */
-	tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
-#endif
-
 	/* Pin selection */
 	tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL;
 	tx3927_ccfgptr->pcfg |=
 		TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL |
 		(TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1));
 
-	printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
-	       tx3927_ccfgptr->crir,
-	       tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
-
-	/* TMR */
-	for (i = 0; i < TX3927_NR_TMR; i++)
-		txx9_tmr_init(TX3927_TMR_REG(i));
-
-	/* DMA */
-	tx3927_dmaptr->mcr = 0;
-	for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
-		/* reset channel */
-		tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
-		tx3927_dmaptr->ch[i].ccr = 0;
-	}
-	/* enable DMA */
-#ifdef __BIG_ENDIAN
-	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
-#else
-	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
-#endif
+	tx3927_setup();
 
-	/* PIO */
 	/* PIO[15:12] connected to LEDs */
 	__raw_writel(0x0000f000, &tx3927_pioptr->dir);
-	__raw_writel(0, &tx3927_pioptr->maskcpu);
-	__raw_writel(0, &tx3927_pioptr->maskext);
-	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
 	gpio_request(11, "dipsw1");
 	gpio_request(10, "dipsw2");
-	{
-		unsigned int conf;
 
-	conf = read_c0_conf();
-               if (!(conf & TX39_CONF_ICE))
-                       printk("TX3927 I-Cache disabled.\n");
-               if (!(conf & TX39_CONF_DCE))
-                       printk("TX3927 D-Cache disabled.\n");
-               else if (!(conf & TX39_CONF_WBON))
-                       printk("TX3927 D-Cache WriteThrough.\n");
-               else if (!(conf & TX39_CONF_CWFON))
-                       printk("TX3927 D-Cache WriteBack.\n");
-               else
-                       printk("TX3927 D-Cache WriteBack (CWF) .\n");
-	}
+	jmr3927_pci_setup();
+
+	/* SIO0 DTR on */
+	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
+
+	jmr3927_led_set(0);
+
+	printk(KERN_INFO
+	       "JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
+	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
+	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
+	       jmr3927_dipsw1(), jmr3927_dipsw2(),
+	       jmr3927_dipsw3(), jmr3927_dipsw4());
 }
 
 /* This trick makes rtc-ds1742 driver usable as is. */
@@ -316,42 +189,21 @@ static unsigned long jmr3927_swizzle_addr_b(unsigned long port)
 #endif
 }
 
-static int __init jmr3927_rtc_init(void)
+static void __init jmr3927_rtc_init(void)
 {
 	static struct resource __initdata res = {
 		.start	= JMR3927_IOC_NVRAMB_ADDR - IO_BASE,
 		.end	= JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1,
 		.flags	= IORESOURCE_MEM,
 	};
-	struct platform_device *dev;
-	dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init jmr3927_wdt_init(void)
-{
-	return txx9_wdt_init(TX3927_TMR_REG(2));
+	platform_device_register_simple("rtc-ds1742", -1, &res, 1);
 }
 
 static void __init jmr3927_device_init(void)
 {
 	__swizzle_addr_b = jmr3927_swizzle_addr_b;
 	jmr3927_rtc_init();
-	jmr3927_wdt_init();
+	tx3927_wdt_init();
 }
 
 struct txx9_board_vec jmr3927_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c
index cd748a9..00cd523 100644
--- a/arch/mips/txx9/rbtx4927/irq.c
+++ b/arch/mips/txx9/rbtx4927/irq.c
@@ -27,85 +27,86 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 /*
-IRQ  Device
-00   RBTX4927-ISA/00
-01   RBTX4927-ISA/01 PS2/Keyboard
-02   RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15)
-03   RBTX4927-ISA/03
-04   RBTX4927-ISA/04
-05   RBTX4927-ISA/05
-06   RBTX4927-ISA/06
-07   RBTX4927-ISA/07
-08   RBTX4927-ISA/08
-09   RBTX4927-ISA/09
-10   RBTX4927-ISA/10
-11   RBTX4927-ISA/11
-12   RBTX4927-ISA/12 PS2/Mouse (not supported at this time)
-13   RBTX4927-ISA/13
-14   RBTX4927-ISA/14 IDE
-15   RBTX4927-ISA/15
-
-16   TX4927-CP0/00 Software 0
-17   TX4927-CP0/01 Software 1
-18   TX4927-CP0/02 Cascade TX4927-CP0
-19   TX4927-CP0/03 Multiplexed -- do not use
-20   TX4927-CP0/04 Multiplexed -- do not use
-21   TX4927-CP0/05 Multiplexed -- do not use
-22   TX4927-CP0/06 Multiplexed -- do not use
-23   TX4927-CP0/07 CPU TIMER
-
-24   TX4927-PIC/00
-25   TX4927-PIC/01
-26   TX4927-PIC/02
-27   TX4927-PIC/03 Cascade RBTX4927-IOC
-28   TX4927-PIC/04
-29   TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet
-30   TX4927-PIC/06
-31   TX4927-PIC/07
-32   TX4927-PIC/08 TX4927 SerialIO Channel 0
-33   TX4927-PIC/09 TX4927 SerialIO Channel 1
-34   TX4927-PIC/10
-35   TX4927-PIC/11
-36   TX4927-PIC/12
-37   TX4927-PIC/13
-38   TX4927-PIC/14
-39   TX4927-PIC/15
-40   TX4927-PIC/16 TX4927 PCI PCI-C
-41   TX4927-PIC/17
-42   TX4927-PIC/18
-43   TX4927-PIC/19
-44   TX4927-PIC/20
-45   TX4927-PIC/21
-46   TX4927-PIC/22 TX4927 PCI PCI-ERR
-47   TX4927-PIC/23 TX4927 PCI PCI-PMA (not used)
-48   TX4927-PIC/24
-49   TX4927-PIC/25
-50   TX4927-PIC/26
-51   TX4927-PIC/27
-52   TX4927-PIC/28
-53   TX4927-PIC/29
-54   TX4927-PIC/30
-55   TX4927-PIC/31
-
-56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed)        [RTL-8139=PJ4]
-57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed)        [RTL-8139=PJ5]
-58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported]
-59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4)      [RTL-8139=PJ6]
-60 RBTX4927-IOC/04
-61 RBTX4927-IOC/05
-62 RBTX4927-IOC/06
-63 RBTX4927-IOC/07
-
-NOTES:
-SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
-SouthBridge/ISA/pin=0 no pci irq used by this device
-SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14
-SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
-SouthBridge/PMC/pin=0 no pci irq used by this device
-SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
-SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
-JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6
-*/
+ * I8259A_IRQ_BASE+00
+ * I8259A_IRQ_BASE+01 PS2/Keyboard
+ * I8259A_IRQ_BASE+02 Cascade RBTX4927-ISA (irqs 8-15)
+ * I8259A_IRQ_BASE+03
+ * I8259A_IRQ_BASE+04
+ * I8259A_IRQ_BASE+05
+ * I8259A_IRQ_BASE+06
+ * I8259A_IRQ_BASE+07
+ * I8259A_IRQ_BASE+08
+ * I8259A_IRQ_BASE+09
+ * I8259A_IRQ_BASE+10
+ * I8259A_IRQ_BASE+11
+ * I8259A_IRQ_BASE+12 PS2/Mouse (not supported at this time)
+ * I8259A_IRQ_BASE+13
+ * I8259A_IRQ_BASE+14 IDE
+ * I8259A_IRQ_BASE+15
+ *
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4927-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02
+ * TXX9_IRQ_BASE+03 Cascade RBTX4927-IOC
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 RBTX4927 RTL-8019AS ethernet
+ * TXX9_IRQ_BASE+06
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4927 SerialIO Channel 0
+ * TXX9_IRQ_BASE+09 TX4927 SerialIO Channel 1
+ * TXX9_IRQ_BASE+10
+ * TXX9_IRQ_BASE+11
+ * TXX9_IRQ_BASE+12
+ * TXX9_IRQ_BASE+13
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4927 PCI PCI-C
+ * TXX9_IRQ_BASE+17
+ * TXX9_IRQ_BASE+18
+ * TXX9_IRQ_BASE+19
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4927 PCI PCI-ERR
+ * TXX9_IRQ_BASE+23 TX4927 PCI PCI-PMA (not used)
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31
+ *
+ * RBTX4927_IRQ_IOC+00 FPCIB0 PCI-D (SouthBridge)
+ * RBTX4927_IRQ_IOC+01 FPCIB0 PCI-C (SouthBridge)
+ * RBTX4927_IRQ_IOC+02 FPCIB0 PCI-B (SouthBridge/IDE/pin=1,INTR)
+ * RBTX4927_IRQ_IOC+03 FPCIB0 PCI-A (SouthBridge/USB/pin=4)
+ * RBTX4927_IRQ_IOC+04
+ * RBTX4927_IRQ_IOC+05
+ * RBTX4927_IRQ_IOC+06
+ * RBTX4927_IRQ_IOC+07
+ *
+ * NOTES:
+ * SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
+ * SouthBridge/ISA/pin=0 no pci irq used by this device
+ * SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR
+ * via ISA IRQ14
+ * SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
+ * SouthBridge/PMC/pin=0 no pci irq used by this device
+ * SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
+ * SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
+ * JP7 is not bus master -- do NOT use -- only 4 pci bus master's
+ * allowed -- SouthBridge, JP4, JP5, JP6
+ */
 
 #include <linux/init.h>
 #include <linux/types.h>
@@ -134,7 +135,7 @@ static int toshiba_rbtx4927_irq_nested(int sw_irq)
 	level3 = readb(rbtx4927_imstat_addr) & 0x1f;
 	if (level3)
 		sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1;
-	return (sw_irq);
+	return sw_irq;
 }
 
 static void __init toshiba_rbtx4927_irq_ioc_init(void)
diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c
index 5c0de54..1dc0a5b 100644
--- a/arch/mips/txx9/rbtx4927/prom.c
+++ b/arch/mips/txx9/rbtx4927/prom.c
@@ -38,4 +38,5 @@ void __init rbtx4927_prom_init(void)
 {
 	prom_init_cmdline();
 	add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL);
 }
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index 3da20ea..0d39baf 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -46,12 +46,9 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/processor.h>
 #include <asm/reboot.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
@@ -103,6 +100,7 @@ static void __init tx4927_pci_setup(void)
 		tx4927_report_pciclk();
 		tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
 	}
+	tx4927_setup_pcierr_irq();
 }
 
 static void __init tx4937_pci_setup(void)
@@ -149,6 +147,7 @@ static void __init tx4937_pci_setup(void)
 		tx4938_report_pciclk();
 		tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
 	}
+	tx4938_setup_pcierr_irq();
 }
 
 static void __init rbtx4927_arch_init(void)
@@ -165,17 +164,8 @@ static void __init rbtx4937_arch_init(void)
 #define rbtx4937_arch_init NULL
 #endif /* CONFIG_PCI */
 
-static void __noreturn wait_forever(void)
-{
-	while (1)
-		if (cpu_wait)
-			(*cpu_wait)();
-}
-
 static void toshiba_rbtx4927_restart(char *command)
 {
-	printk(KERN_NOTICE "System Rebooting...\n");
-
 	/* enable the s/w reset register */
 	writeb(1, rbtx4927_softresetlock_addr);
 
@@ -186,24 +176,8 @@ static void toshiba_rbtx4927_restart(char *command)
 	/* do a s/w reset */
 	writeb(1, rbtx4927_softreset_addr);
 
-	/* do something passive while waiting for reset */
-	local_irq_disable();
-	wait_forever();
-	/* no return */
-}
-
-static void toshiba_rbtx4927_halt(void)
-{
-	printk(KERN_NOTICE "System Halted\n");
-	local_irq_disable();
-	wait_forever();
-	/* no return */
-}
-
-static void toshiba_rbtx4927_power_off(void)
-{
-	toshiba_rbtx4927_halt();
-	/* no return */
+	/* fallback */
+	(*_machine_halt)();
 }
 
 static void __init rbtx4927_clock_init(void);
@@ -214,9 +188,6 @@ static void __init rbtx4927_mem_setup(void)
 	u32 cp0_config;
 	char *argptr;
 
-	/* f/w leaves this on at startup */
-	clear_c0_status(ST0_ERL);
-
 	/* enable caches -- HCP5 does this, pmon does not */
 	cp0_config = read_c0_config();
 	cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
@@ -231,37 +202,21 @@ static void __init rbtx4927_mem_setup(void)
 	}
 
 	_machine_restart = toshiba_rbtx4927_restart;
-	_machine_halt = toshiba_rbtx4927_halt;
-	pm_power_off = toshiba_rbtx4927_power_off;
 
 #ifdef CONFIG_PCI
 	txx9_alloc_pci_controller(&txx9_primary_pcic,
 				  RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE,
 				  RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE);
+	txx9_board_pcibios_setup = tx4927_pcibios_setup;
 #else
 	set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
 #endif
 
-	tx4927_setup_serial();
+	tx4927_sio_init(0, 0);
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
-                strcat(argptr, " console=ttyS0,38400");
-        }
-#endif
-
-#ifdef CONFIG_ROOT_NFS
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "root=") == NULL) {
-                strcat(argptr, " root=/dev/nfs rw");
-        }
-#endif
-
-#ifdef CONFIG_IP_PNP
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "ip=") == NULL) {
-                strcat(argptr, " ip=any");
-        }
+	argptr = prom_getcmdline();
+	if (!strstr(argptr, "console="))
+		strcat(argptr, " console=ttyS0,38400");
 #endif
 }
 
@@ -324,19 +279,17 @@ static void __init rbtx4927_time_init(void)
 	tx4927_time_init(0);
 }
 
-static int __init toshiba_rbtx4927_rtc_init(void)
+static void __init toshiba_rbtx4927_rtc_init(void)
 {
 	struct resource res = {
 		.start	= RBTX4927_BRAMRTC_BASE - IO_BASE,
 		.end	= RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1,
 		.flags	= IORESOURCE_MEM,
 	};
-	struct platform_device *dev =
-		platform_device_register_simple("rtc-ds1742", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+	platform_device_register_simple("rtc-ds1742", -1, &res, 1);
 }
 
-static int __init rbtx4927_ne_init(void)
+static void __init rbtx4927_ne_init(void)
 {
 	struct resource res[] = {
 		{
@@ -348,36 +301,14 @@ static int __init rbtx4927_ne_init(void)
 			.flags	= IORESOURCE_IRQ,
 		}
 	};
-	struct platform_device *dev =
-		platform_device_register_simple("ne", -1,
-						res, ARRAY_SIZE(res));
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4927_wdt_init(void)
-{
-	return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+	platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
 }
 
 static void __init rbtx4927_device_init(void)
 {
 	toshiba_rbtx4927_rtc_init();
 	rbtx4927_ne_init();
-	rbtx4927_wdt_init();
+	tx4927_wdt_init();
 }
 
 struct txx9_board_vec rbtx4927_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c
index 3971a06..ca2f830 100644
--- a/arch/mips/txx9/rbtx4938/irq.c
+++ b/arch/mips/txx9/rbtx4938/irq.c
@@ -11,59 +11,57 @@
  */
 
 /*
-IRQ  Device
-
-16   TX4938-CP0/00 Software 0
-17   TX4938-CP0/01 Software 1
-18   TX4938-CP0/02 Cascade TX4938-CP0
-19   TX4938-CP0/03 Multiplexed -- do not use
-20   TX4938-CP0/04 Multiplexed -- do not use
-21   TX4938-CP0/05 Multiplexed -- do not use
-22   TX4938-CP0/06 Multiplexed -- do not use
-23   TX4938-CP0/07 CPU TIMER
-
-24   TX4938-PIC/00
-25   TX4938-PIC/01
-26   TX4938-PIC/02 Cascade RBTX4938-IOC
-27   TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
-28   TX4938-PIC/04
-29   TX4938-PIC/05 TX4938 ETH1
-30   TX4938-PIC/06 TX4938 ETH0
-31   TX4938-PIC/07
-32   TX4938-PIC/08 TX4938 SIO 0
-33   TX4938-PIC/09 TX4938 SIO 1
-34   TX4938-PIC/10 TX4938 DMA0
-35   TX4938-PIC/11 TX4938 DMA1
-36   TX4938-PIC/12 TX4938 DMA2
-37   TX4938-PIC/13 TX4938 DMA3
-38   TX4938-PIC/14
-39   TX4938-PIC/15
-40   TX4938-PIC/16 TX4938 PCIC
-41   TX4938-PIC/17 TX4938 TMR0
-42   TX4938-PIC/18 TX4938 TMR1
-43   TX4938-PIC/19 TX4938 TMR2
-44   TX4938-PIC/20
-45   TX4938-PIC/21
-46   TX4938-PIC/22 TX4938 PCIERR
-47   TX4938-PIC/23
-48   TX4938-PIC/24
-49   TX4938-PIC/25
-50   TX4938-PIC/26
-51   TX4938-PIC/27
-52   TX4938-PIC/28
-53   TX4938-PIC/29
-54   TX4938-PIC/30
-55   TX4938-PIC/31 TX4938 SPI
-
-56 RBTX4938-IOC/00 PCI-D
-57 RBTX4938-IOC/01 PCI-C
-58 RBTX4938-IOC/02 PCI-B
-59 RBTX4938-IOC/03 PCI-A
-60 RBTX4938-IOC/04 RTC
-61 RBTX4938-IOC/05 ATA
-62 RBTX4938-IOC/06 MODEM
-63 RBTX4938-IOC/07 SWINT
-*/
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC
+ * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 TX4938 ETH1
+ * TXX9_IRQ_BASE+06 TX4938 ETH0
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4938 SIO 0
+ * TXX9_IRQ_BASE+09 TX4938 SIO 1
+ * TXX9_IRQ_BASE+10 TX4938 DMA0
+ * TXX9_IRQ_BASE+11 TX4938 DMA1
+ * TXX9_IRQ_BASE+12 TX4938 DMA2
+ * TXX9_IRQ_BASE+13 TX4938 DMA3
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4938 PCIC
+ * TXX9_IRQ_BASE+17 TX4938 TMR0
+ * TXX9_IRQ_BASE+18 TX4938 TMR1
+ * TXX9_IRQ_BASE+19 TX4938 TMR2
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4938 PCIERR
+ * TXX9_IRQ_BASE+23
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31 TX4938 SPI
+ *
+ * RBTX4938_IRQ_IOC+00 PCI-D
+ * RBTX4938_IRQ_IOC+01 PCI-C
+ * RBTX4938_IRQ_IOC+02 PCI-B
+ * RBTX4938_IRQ_IOC+03 PCI-A
+ * RBTX4938_IRQ_IOC+04 RTC
+ * RBTX4938_IRQ_IOC+05 ATA
+ * RBTX4938_IRQ_IOC+06 MODEM
+ * RBTX4938_IRQ_IOC+07 SWINT
+ */
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <asm/mipsregs.h>
@@ -93,9 +91,6 @@ static int toshiba_rbtx4938_irq_nested(int sw_irq)
 	return sw_irq;
 }
 
-/**********************************************************************************/
-/* Functions for ioc                                                              */
-/**********************************************************************************/
 static void __init
 toshiba_rbtx4938_irq_ioc_init(void)
 {
diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c
index ee18951..d73123c 100644
--- a/arch/mips/txx9/rbtx4938/prom.c
+++ b/arch/mips/txx9/rbtx4938/prom.c
@@ -22,4 +22,5 @@ void __init rbtx4938_prom_init(void)
 	prom_init_cmdline();
 #endif
 	add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL);
 }
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index 6c2b99b..9ab48de 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -13,9 +13,6 @@
 #include <linux/types.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
@@ -28,33 +25,14 @@
 #include <asm/txx9/spi.h>
 #include <asm/txx9pio.h>
 
-static void rbtx4938_machine_halt(void)
-{
-        printk(KERN_NOTICE "System Halted\n");
-	local_irq_disable();
-
-	while (1)
-		__asm__(".set\tmips3\n\t"
-			"wait\n\t"
-			".set\tmips0");
-}
-
-static void rbtx4938_machine_power_off(void)
-{
-        rbtx4938_machine_halt();
-        /* no return */
-}
-
 static void rbtx4938_machine_restart(char *command)
 {
 	local_irq_disable();
-
-	printk("Rebooting...");
 	writeb(1, rbtx4938_softresetlock_addr);
 	writeb(1, rbtx4938_sfvol_addr);
 	writeb(1, rbtx4938_softreset_addr);
-	while(1)
-		;
+	/* fallback */
+	(*_machine_halt)();
 }
 
 static void __init rbtx4938_pci_setup(void)
@@ -121,6 +99,7 @@ static void __init rbtx4938_pci_setup(void)
 		register_pci_controller(c);
 		tx4927_pcic_setup(tx4938_pcic1ptr, c, 0);
 	}
+	tx4938_setup_pcierr_irq();
 #endif /* CONFIG_PCI */
 }
 
@@ -151,19 +130,7 @@ static int __init rbtx4938_ethaddr_init(void)
 		if (sum)
 			printk(KERN_WARNING "seeprom: bad checksum.\n");
 	}
-	for (i = 0; i < 2; i++) {
-		unsigned int id =
-			TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0);
-		struct platform_device *pdev;
-		if (!(__raw_readq(&tx4938_ccfgptr->pcfg) &
-		      (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL)))
-			continue;
-		pdev = platform_device_alloc("tc35815-mac", id);
-		if (!pdev ||
-		    platform_device_add_data(pdev, &dat[4 + 6 * i], 6) ||
-		    platform_device_add(pdev))
-			platform_device_put(pdev);
-	}
+	tx4938_ethaddr_init(&dat[4], &dat[4 + 6]);
 #endif /* CONFIG_PCI */
 	return 0;
 }
@@ -193,51 +160,36 @@ static void __init rbtx4938_mem_setup(void)
 
 #ifdef CONFIG_PCI
 	txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
+	txx9_board_pcibios_setup = tx4927_pcibios_setup;
 #else
 	set_io_port_base(RBTX4938_ETHER_BASE);
 #endif
 
-	tx4938_setup_serial();
+	tx4938_sio_init(7372800, 0);
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
-                strcat(argptr, " console=ttyS0,38400");
-        }
+	argptr = prom_getcmdline();
+	if (!strstr(argptr, "console="))
+		strcat(argptr, " console=ttyS0,38400");
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
-	printk("PIOSEL: disabling both ata and nand selection\n");
-	local_irq_disable();
+	printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
 	txx9_clear64(&tx4938_ccfgptr->pcfg,
 		     TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
-	printk("PIOSEL: enabling nand selection\n");
+	printk(KERN_INFO "PIOSEL: enabling nand selection\n");
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
-	printk("PIOSEL: enabling ata selection\n");
+	printk(KERN_INFO "PIOSEL: enabling ata selection\n");
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 #endif
 
-#ifdef CONFIG_IP_PNP
-	argptr = prom_getcmdline();
-	if (strstr(argptr, "ip=") == NULL) {
-		strcat(argptr, " ip=any");
-	}
-#endif
-
-
-#ifdef CONFIG_FB
-	{
-		conswitchp = &dummy_con;
-	}
-#endif
-
 	rbtx4938_spi_setup();
 	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);	/* updated */
 	/* fixup piosel */
@@ -258,11 +210,9 @@ static void __init rbtx4938_mem_setup(void)
 	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
 	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 	if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
-		printk("request resource for fpga failed\n");
+		printk(KERN_ERR "request resource for fpga failed\n");
 
 	_machine_restart = rbtx4938_machine_restart;
-	_machine_halt = rbtx4938_machine_halt;
-	pm_power_off = rbtx4938_machine_power_off;
 
 	writeb(0xff, rbtx4938_led_addr);
 	printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
@@ -270,7 +220,7 @@ static void __init rbtx4938_mem_setup(void)
 	       readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
 }
 
-static int __init rbtx4938_ne_init(void)
+static void __init rbtx4938_ne_init(void)
 {
 	struct resource res[] = {
 		{
@@ -282,10 +232,7 @@ static int __init rbtx4938_ne_init(void)
 			.flags	= IORESOURCE_IRQ,
 		}
 	};
-	struct platform_device *dev =
-		platform_device_register_simple("ne", -1,
-						res, ARRAY_SIZE(res));
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+	platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
 }
 
 static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
@@ -321,24 +268,6 @@ static struct gpio_chip rbtx4938_spi_gpio_chip = {
 	.ngpio = 3,
 };
 
-/* SPI support */
-
-static void __init txx9_spi_init(unsigned long base, int irq)
-{
-	struct resource res[] = {
-		{
-			.start	= base,
-			.end	= base + 0x20 - 1,
-			.flags	= IORESOURCE_MEM,
-		}, {
-			.start	= irq,
-			.flags	= IORESOURCE_IRQ,
-		},
-	};
-	platform_device_register_simple("spi_txx9", 0,
-					res, ARRAY_SIZE(res));
-}
-
 static int __init rbtx4938_spi_init(void)
 {
 	struct spi_board_info srtc_info = {
@@ -361,7 +290,7 @@ static int __init rbtx4938_spi_init(void)
 	gpio_direction_output(16 + SEEPROM2_CS, 1);
 	gpio_request(16 + SEEPROM3_CS, "seeprom3");
 	gpio_direction_output(16 + SEEPROM3_CS, 1);
-	txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI);
+	tx4938_spi_init(0);
 	return 0;
 }
 
@@ -372,30 +301,11 @@ static void __init rbtx4938_arch_init(void)
 	rbtx4938_spi_init();
 }
 
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4938_wdt_init(void)
-{
-	return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
-}
-
 static void __init rbtx4938_device_init(void)
 {
 	rbtx4938_ethaddr_init();
 	rbtx4938_ne_init();
-	rbtx4938_wdt_init();
+	tx4938_wdt_init();
 }
 
 struct txx9_board_vec rbtx4938_vec __initdata = {
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 587da5e..63c9caf 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -42,6 +42,9 @@ config GENERIC_HARDIRQS
 	bool
 	default y
 
+config HAVE_GET_USER_PAGES_FAST
+	def_bool PPC64
+
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool PPC64
 
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 7345743..fbc9304 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -68,6 +68,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <132000000>;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index e74c045..b157d18 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -51,6 +51,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 8dfab56..700e076 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -52,6 +52,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;                    // from bootloader
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index 49ca349..cdd3063 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -50,6 +50,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;                    // from bootloader
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index ba586cb..783241c 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -57,6 +57,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 3701dae..a3b76a7 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -61,6 +61,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <264000000>;
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 8acd1d6..89c9202 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -149,18 +149,14 @@
 		};
 
 		crypto@30000 {
-			compatible = "fsl,sec2-crypto";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
-			interrupts = <11 8>;
+			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x7e>;
-			/*
-			 * desc mask is for rev1.x, we need runtime fixup
-			 * for >=2.x
-			 */
-			descriptor-types-mask = <0x1010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: interrupt-controller@700 {
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 0a700cb..432782b 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -117,6 +117,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 29c8c76..ed32c8d 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -117,6 +117,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index d641a89..f4db9ed 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -117,6 +117,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 02cfa24..1505d68 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -49,6 +49,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xffe00000 0x100000>;
 		reg = <0xffe00000 0x1000>;
 		bus-frequency = <0>;		// Filled out by uboot.
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index f2273a8..9568bfa 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x100000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index c4469f1..6480f4f 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 7d3829d..f1fb207 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -54,6 +54,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index d84466b..431b496 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -58,6 +58,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index e03a780..d833a5c 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index ba8159d..4d1f2f2 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x200>;
 		bus-frequency = <330000000>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 9c30a34..a15f103 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -60,6 +60,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;
 		bus-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 08c61e3..e124dd1 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -68,6 +68,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xffe00000 0x100000>;
 		reg = <0xffe00000 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 9f856a0..1a09719 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -636,10 +636,6 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 		retval = -EIO;
 	} else if (retval == H_PARAMETER) {
 		retval = -EINVAL;
-	} else {
-		printk(KERN_WARNING "%s: received unknown hv return code %ld",
-		       __func__, retval);
-		retval = -EIO;
 	}
 
 	return retval;
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 6b66cd8..3635be6 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -375,7 +375,7 @@ static int vsr_get(struct task_struct *target, const struct user_regset *regset,
 	flush_vsx_to_thread(target);
 
 	for (i = 0; i < 32 ; i++)
-		buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET];
+		buf[i] = target->thread.fpr[i][TS_VSRLOWOFFSET];
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  buf, 0, 32 * sizeof(double));
 
@@ -394,7 +394,7 @@ static int vsr_set(struct task_struct *target, const struct user_regset *regset,
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 buf, 0, 32 * sizeof(double));
 	for (i = 0; i < 32 ; i++)
-		current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+		target->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
 
 
 	return ret;
@@ -975,15 +975,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	case PTRACE_GETVSRREGS:
 		return copy_regset_to_user(child, &user_ppc_native_view,
 					   REGSET_VSX,
-					   0, (32 * sizeof(vector128) +
-					       sizeof(u32)),
+					   0, 32 * sizeof(double),
 					   (void __user *) data);
 
 	case PTRACE_SETVSRREGS:
 		return copy_regset_from_user(child, &user_ppc_native_view,
 					     REGSET_VSX,
-					     0, (32 * sizeof(vector128) +
-						 sizeof(u32)),
+					     0, 32 * sizeof(double),
 					     (const void __user *) data);
 #endif
 #ifdef CONFIG_SPE
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 67bf1a1..197d49c 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -294,6 +294,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 	case PTRACE_SETFPREGS:
 	case PTRACE_GETVRREGS:
 	case PTRACE_SETVRREGS:
+	case PTRACE_GETVSRREGS:
+	case PTRACE_SETVSRREGS:
 	case PTRACE_GETREGS64:
 	case PTRACE_SETREGS64:
 	case PPC_PTRACE_GETFPREGS:
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 1c00e01..e7392b4 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -12,7 +12,8 @@ obj-y				:= fault.o mem.o \
 				   mmu_context_$(CONFIG_WORD_SIZE).o
 hash-$(CONFIG_PPC_NATIVE)	:= hash_native_64.o
 obj-$(CONFIG_PPC64)		+= hash_utils_64.o \
-				   slb_low.o slb.o stab.o mmap.o $(hash-y)
+				   slb_low.o slb.o stab.o \
+				   gup.o mmap.o $(hash-y)
 obj-$(CONFIG_PPC_STD_MMU_32)	+= ppc_mmu_32.o
 obj-$(CONFIG_PPC_STD_MMU)	+= hash_low_$(CONFIG_WORD_SIZE).o \
 				   tlb_$(CONFIG_WORD_SIZE).o
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
new file mode 100644
index 0000000..9fdf4d6
--- /dev/null
+++ b/arch/powerpc/mm/gup.c
@@ -0,0 +1,280 @@
+/*
+ * Lockless get_user_pages_fast for powerpc
+ *
+ * Copyright (C) 2008 Nick Piggin
+ * Copyright (C) 2008 Novell Inc.
+ */
+#undef DEBUG
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/vmstat.h>
+#include <linux/pagemap.h>
+#include <linux/rwsem.h>
+#include <asm/pgtable.h>
+
+/*
+ * The performance critical leaf functions are made noinline otherwise gcc
+ * inlines everything into a single function which results in too much
+ * register pressure.
+ */
+static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask, result;
+	pte_t *ptep;
+
+	result = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		result |= _PAGE_RW;
+	mask = result | _PAGE_SPECIAL;
+
+	ptep = pte_offset_kernel(&pmd, addr);
+	do {
+		pte_t pte = *ptep;
+		struct page *page;
+
+		if ((pte_val(pte) & mask) != result)
+			return 0;
+		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+		page = pte_page(pte);
+		if (!page_cache_get_speculative(page))
+			return 0;
+		if (unlikely(pte != *ptep)) {
+			put_page(page);
+			return 0;
+		}
+		pages[*nr] = page;
+		(*nr)++;
+
+	} while (ptep++, addr += PAGE_SIZE, addr != end);
+
+	return 1;
+}
+
+#ifdef CONFIG_HUGETLB_PAGE
+static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate,
+				 unsigned long *addr, unsigned long end,
+				 int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	unsigned long pte_end;
+	struct page *head, *page;
+	pte_t pte;
+	int refs;
+
+	pte_end = (*addr + huge_page_size(hstate)) & huge_page_mask(hstate);
+	if (pte_end < end)
+		end = pte_end;
+
+	pte = *ptep;
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+	if ((pte_val(pte) & mask) != mask)
+		return 0;
+	/* hugepages are never "special" */
+	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+	refs = 0;
+	head = pte_page(pte);
+	page = head + ((*addr & ~huge_page_mask(hstate)) >> PAGE_SHIFT);
+	do {
+		VM_BUG_ON(compound_head(page) != head);
+		pages[*nr] = page;
+		(*nr)++;
+		page++;
+		refs++;
+	} while (*addr += PAGE_SIZE, *addr != end);
+
+	if (!page_cache_add_speculative(head, refs)) {
+		*nr -= refs;
+		return 0;
+	}
+	if (unlikely(pte != *ptep)) {
+		/* Could be optimized better */
+		while (*nr) {
+			put_page(page);
+			(*nr)--;
+		}
+	}
+
+	return 1;
+}
+#endif /* CONFIG_HUGETLB_PAGE */
+
+static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
+		int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pmd_t *pmdp;
+
+	pmdp = pmd_offset(&pud, addr);
+	do {
+		pmd_t pmd = *pmdp;
+
+		next = pmd_addr_end(addr, end);
+		if (pmd_none(pmd))
+			return 0;
+		if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+			return 0;
+	} while (pmdp++, addr = next, addr != end);
+
+	return 1;
+}
+
+static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
+		int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pud_t *pudp;
+
+	pudp = pud_offset(&pgd, addr);
+	do {
+		pud_t pud = *pudp;
+
+		next = pud_addr_end(addr, end);
+		if (pud_none(pud))
+			return 0;
+		if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+			return 0;
+	} while (pudp++, addr = next, addr != end);
+
+	return 1;
+}
+
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr, len, end;
+	unsigned long next;
+	pgd_t *pgdp;
+	int psize, nr = 0;
+	unsigned int shift;
+
+	pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+
+	start &= PAGE_MASK;
+	addr = start;
+	len = (unsigned long) nr_pages << PAGE_SHIFT;
+	end = start + len;
+
+	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+					start, len)))
+		goto slow_irqon;
+
+	pr_debug("  aligned: %lx .. %lx\n", start, end);
+
+#ifdef CONFIG_HUGETLB_PAGE
+	/* We bail out on slice boundary crossing when hugetlb is
+	 * enabled in order to not have to deal with two different
+	 * page table formats
+	 */
+	if (addr < SLICE_LOW_TOP) {
+		if (end > SLICE_LOW_TOP)
+			goto slow_irqon;
+
+		if (unlikely(GET_LOW_SLICE_INDEX(addr) !=
+			     GET_LOW_SLICE_INDEX(end - 1)))
+			goto slow_irqon;
+	} else {
+		if (unlikely(GET_HIGH_SLICE_INDEX(addr) !=
+			     GET_HIGH_SLICE_INDEX(end - 1)))
+			goto slow_irqon;
+	}
+#endif /* CONFIG_HUGETLB_PAGE */
+
+	/*
+	 * XXX: batch / limit 'nr', to avoid large irq off latency
+	 * needs some instrumenting to determine the common sizes used by
+	 * important workloads (eg. DB2), and whether limiting the batch size
+	 * will decrease performance.
+	 *
+	 * It seems like we're in the clear for the moment. Direct-IO is
+	 * the main guy that batches up lots of get_user_pages, and even
+	 * they are limited to 64-at-a-time which is not so many.
+	 */
+	/*
+	 * This doesn't prevent pagetable teardown, but does prevent
+	 * the pagetables from being freed on powerpc.
+	 *
+	 * So long as we atomically load page table pointers versus teardown,
+	 * we can follow the address down to the the page and take a ref on it.
+	 */
+	local_irq_disable();
+
+	psize = get_slice_psize(mm, addr);
+	shift = mmu_psize_defs[psize].shift;
+
+#ifdef CONFIG_HUGETLB_PAGE
+	if (unlikely(mmu_huge_psizes[psize])) {
+		pte_t *ptep;
+		unsigned long a = addr;
+		unsigned long sz = ((1UL) << shift);
+		struct hstate *hstate = size_to_hstate(sz);
+
+		BUG_ON(!hstate);
+		/*
+		 * XXX: could be optimized to avoid hstate
+		 * lookup entirely (just use shift)
+		 */
+
+		do {
+			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
+			ptep = huge_pte_offset(mm, a);
+			pr_debug(" %016lx: huge ptep %p\n", a, ptep);
+			if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
+						   &nr))
+				goto slow;
+		} while (a != end);
+	} else
+#endif /* CONFIG_HUGETLB_PAGE */
+	{
+		pgdp = pgd_offset(mm, addr);
+		do {
+			pgd_t pgd = *pgdp;
+
+			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
+			pr_debug("  %016lx: normal pgd %p\n", addr, (void *)pgd);
+			next = pgd_addr_end(addr, end);
+			if (pgd_none(pgd))
+				goto slow;
+			if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+				goto slow;
+		} while (pgdp++, addr = next, addr != end);
+	}
+	local_irq_enable();
+
+	VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
+	return nr;
+
+	{
+		int ret;
+
+slow:
+		local_irq_enable();
+slow_irqon:
+		pr_debug("  slow path ! nr = %d\n", nr);
+
+		/* Try to get the remaining pages with get_user_pages */
+		start += nr << PAGE_SHIFT;
+		pages += nr;
+
+		down_read(&mm->mmap_sem);
+		ret = get_user_pages(current, mm, start,
+			(end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
+		up_read(&mm->mmap_sem);
+
+		/* Have to be a bit careful with return values */
+		if (nr > 0) {
+			if (ret < 0)
+				ret = nr;
+			else
+				ret += nr;
+		}
+
+		return ret;
+	}
+}
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index dd4be4a..ec43477 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -105,6 +105,7 @@ static void __init mpc832x_sys_setup_arch(void)
 static struct of_device_id mpc832x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index f049d69..0300268 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -115,6 +115,7 @@ static void __init mpc832x_rdb_setup_arch(void)
 static struct of_device_id mpc832x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 7301d77..76092d3 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -41,6 +41,7 @@
 
 static struct of_device_id __initdata mpc834x_itx_ids[] = {
 	{ .compatible = "fsl,pq2pro-localbus", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 30d509a..fc3f2ed 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -111,6 +111,7 @@ static void __init mpc834x_mds_init_IRQ(void)
 static struct of_device_id mpc834x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 75b80e8..9d46e5b 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -136,6 +136,7 @@ static void __init mpc836x_mds_setup_arch(void)
 static struct of_device_id mpc836x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index fc21f5c..156c4e2 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -83,6 +83,7 @@ static void __init sbc834x_init_IRQ(void)
 static struct __initdata of_device_id sbc834x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
index 2145ade..8a3b117 100644
--- a/arch/powerpc/platforms/85xx/ksi8560.c
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -222,6 +222,7 @@ static void ksi8560_show_cpuinfo(struct seq_file *m)
 
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .type = "soc", },
+	{ .type = "simple-bus", },
 	{ .name = "cpm", },
 	{ .name = "localbus", },
 	{},
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 6b846aa..1bf5aef 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -91,6 +91,7 @@ static void __init mpc8536_ds_setup_arch(void)
 static struct of_device_id __initdata mpc8536_ds_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index ba498d6..d17807a 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -230,6 +230,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
 	{ .type = "soc", },
 	{ .name = "cpm", },
 	{ .name = "localbus", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 00c5358..483b65c 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -186,6 +186,7 @@ static int __init mpc8544_ds_probe(void)
 static struct of_device_id __initdata mpc85xxds_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 43a459f..2494c51 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -260,6 +260,7 @@ machine_arch_initcall(mpc85xx_mds, board_fixups);
 static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index 2c580cd..6509ade 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -217,6 +217,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
 	{ .type = "soc", },
 	{ .name = "cpm", },
 	{ .name = "localbus", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 6fc849e..71d7562 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -105,6 +105,16 @@ config 8xx_COPYBACK
 
 	  If in doubt, say Y here.
 
+config 8xx_GPIO
+	bool "GPIO API Support"
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Saying Y here will cause the ports on an MPC8xx processor to be used
+	  with the GPIO API.  If you say N here, the kernel needs less memory.
+
+	  If in doubt, say Y here.
+
 config 8xx_CPU6
 	bool "CPU6 Silicon Errata (860 Pre Rev. C)"
 	help
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 1d09687..4c900ef 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -254,6 +254,8 @@ config CPM2
 	select CPM
 	select PPC_LIB_RHEAP
 	select PPC_PCI_CHOICE
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
 	help
 	  The CPM2 (Communications Processor Module) is a coprocessor on
 	  embedded CPUs made by Freescale.  Selecting this option means that
@@ -281,6 +283,7 @@ config FSL_ULI1575
 
 config CPM
 	bool
+	select PPC_CLOCK
 
 config OF_RTC
 	bool
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
index 69288f6..3233fe8 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
+++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
@@ -96,6 +96,12 @@ static int pmi_notifier(struct notifier_block *nb,
 	struct cpufreq_frequency_table *cbe_freqs;
 	u8 node;
 
+	/* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE
+	 * and CPUFREQ_NOTIFY policy events?)
+	 */
+	if (event == CPUFREQ_START)
+		return 0;
+
 	cbe_freqs = cpufreq_frequency_get_table(policy->cpu);
 	node = cbe_cpu_to_node(policy->cpu);
 
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 661df42..4a04823 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -30,6 +30,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/spinlock.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
@@ -42,6 +43,10 @@
 
 #include <asm/fs_pd.h>
 
+#ifdef CONFIG_8xx_GPIO
+#include <linux/of_gpio.h>
+#endif
+
 #define CPM_MAP_SIZE    (0x4000)
 
 cpm8xx_t __iomem *cpmp;  /* Pointer to comm processor space */
@@ -290,20 +295,24 @@ struct cpm_ioport16 {
 	__be16 res[3];
 };
 
-struct cpm_ioport32 {
-	__be32 dir, par, sor;
+struct cpm_ioport32b {
+	__be32 dir, par, odr, dat;
+};
+
+struct cpm_ioport32e {
+	__be32 dir, par, sor, odr, dat;
 };
 
 static void cpm1_set_pin32(int port, int pin, int flags)
 {
-	struct cpm_ioport32 __iomem *iop;
+	struct cpm_ioport32e __iomem *iop;
 	pin = 1 << (31 - pin);
 
 	if (port == CPM_PORTB)
-		iop = (struct cpm_ioport32 __iomem *)
+		iop = (struct cpm_ioport32e __iomem *)
 		      &mpc8xx_immr->im_cpm.cp_pbdir;
 	else
-		iop = (struct cpm_ioport32 __iomem *)
+		iop = (struct cpm_ioport32e __iomem *)
 		      &mpc8xx_immr->im_cpm.cp_pedir;
 
 	if (flags & CPM_PIN_OUTPUT)
@@ -498,3 +507,251 @@ int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
 
 	return 0;
 }
+
+/*
+ * GPIO LIB API implementation
+ */
+#ifdef CONFIG_8xx_GPIO
+
+struct cpm1_gpio16_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u16 cpdata;
+};
+
+static inline struct cpm1_gpio16_chip *
+to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
+}
+
+static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+
+	cpm1_gc->cpdata = in_be16(&iop->dat);
+}
+
+static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	return !!(in_be16(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u16 pin_mask = 1 << (15 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	if (value)
+		cpm1_gc->cpdata |= pin_mask;
+	else
+		cpm1_gc->cpdata &= ~pin_mask;
+
+	out_be16(&iop->dat, cpm1_gc->cpdata);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	setbits16(&iop->dir, pin_mask);
+
+	cpm1_gpio16_set(gc, gpio, val);
+
+	return 0;
+}
+
+static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	clrbits16(&iop->dir, pin_mask);
+
+	return 0;
+}
+
+int cpm1_gpiochip_add16(struct device_node *np)
+{
+	struct cpm1_gpio16_chip *cpm1_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct of_gpio_chip *of_gc;
+	struct gpio_chip *gc;
+
+	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+	if (!cpm1_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm1_gc->lock);
+
+	mm_gc = &cpm1_gc->mm_gc;
+	of_gc = &mm_gc->of_gc;
+	gc = &of_gc->gc;
+
+	mm_gc->save_regs = cpm1_gpio16_save_regs;
+	of_gc->gpio_cells = 2;
+	gc->ngpio = 16;
+	gc->direction_input = cpm1_gpio16_dir_in;
+	gc->direction_output = cpm1_gpio16_dir_out;
+	gc->get = cpm1_gpio16_get;
+	gc->set = cpm1_gpio16_set;
+
+	return of_mm_gpiochip_add(np, mm_gc);
+}
+
+struct cpm1_gpio32_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u32 cpdata;
+};
+
+static inline struct cpm1_gpio32_chip *
+to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
+}
+
+static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+
+	cpm1_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	if (value)
+		cpm1_gc->cpdata |= pin_mask;
+	else
+		cpm1_gc->cpdata &= ~pin_mask;
+
+	out_be32(&iop->dat, cpm1_gc->cpdata);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	setbits32(&iop->dir, pin_mask);
+
+	cpm1_gpio32_set(gc, gpio, val);
+
+	return 0;
+}
+
+static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	clrbits32(&iop->dir, pin_mask);
+
+	return 0;
+}
+
+int cpm1_gpiochip_add32(struct device_node *np)
+{
+	struct cpm1_gpio32_chip *cpm1_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct of_gpio_chip *of_gc;
+	struct gpio_chip *gc;
+
+	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+	if (!cpm1_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm1_gc->lock);
+
+	mm_gc = &cpm1_gc->mm_gc;
+	of_gc = &mm_gc->of_gc;
+	gc = &of_gc->gc;
+
+	mm_gc->save_regs = cpm1_gpio32_save_regs;
+	of_gc->gpio_cells = 2;
+	gc->ngpio = 32;
+	gc->direction_input = cpm1_gpio32_dir_in;
+	gc->direction_output = cpm1_gpio32_dir_out;
+	gc->get = cpm1_gpio32_get;
+	gc->set = cpm1_gpio32_set;
+
+	return of_mm_gpiochip_add(np, mm_gc);
+}
+
+static int cpm_init_par_io(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a")
+		cpm1_gpiochip_add16(np);
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b")
+		cpm1_gpiochip_add32(np);
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c")
+		cpm1_gpiochip_add16(np);
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d")
+		cpm1_gpiochip_add16(np);
+
+	/* Port E uses CPM2 layout */
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e")
+		cpm2_gpiochip_add32(np);
+	return 0;
+}
+arch_initcall(cpm_init_par_io);
+
+#endif /* CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index 5a6c5df..f1c3395 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -115,16 +115,10 @@ EXPORT_SYMBOL(cpm_command);
  * Baud rate clocks are zero-based in the driver code (as that maps
  * to port numbers).  Documentation uses 1-based numbering.
  */
-#define BRG_INT_CLK	(get_brgfreq())
-#define BRG_UART_CLK	(BRG_INT_CLK/16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-cpm_setbrg(uint brg, uint rate)
+void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src)
 {
 	u32 __iomem *bp;
+	u32 val;
 
 	/* This is good enough to get SMCs running.....
 	*/
@@ -135,34 +129,14 @@ cpm_setbrg(uint brg, uint rate)
 		brg -= 4;
 	}
 	bp += brg;
-	out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
-
-	cpm2_unmap(bp);
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-cpm2_fastbrg(uint brg, uint rate, int div16)
-{
-	u32 __iomem *bp;
-	u32 val;
-
-	if (brg < 4) {
-		bp = cpm2_map_size(im_brgc1, 16);
-	} else {
-		bp = cpm2_map_size(im_brgc5, 16);
-		brg -= 4;
-	}
-	bp += brg;
-	val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+	val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src;
 	if (div16)
 		val |= CPM_BRG_DIV16;
 
 	out_be32(bp, val);
 	cpm2_unmap(bp);
 }
+EXPORT_SYMBOL(__cpm2_setbrg);
 
 int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
 {
@@ -377,3 +351,14 @@ void cpm2_set_pin(int port, int pin, int flags)
 	else
 		clrbits32(&iop[port].odr, pin);
 }
+
+static int cpm_init_par_io(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,cpm2-pario-bank")
+		cpm2_gpiochip_add32(np);
+	return 0;
+}
+arch_initcall(cpm_init_par_io);
+
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index e4b7296..53da8a07 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -19,6 +19,8 @@
 
 #include <linux/init.h>
 #include <linux/of_device.h>
+#include <linux/spinlock.h>
+#include <linux/of.h>
 
 #include <asm/udbg.h>
 #include <asm/io.h>
@@ -28,6 +30,10 @@
 
 #include <mm/mmu_decl.h>
 
+#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
+#include <linux/of_gpio.h>
+#endif
+
 #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
 static u32 __iomem *cpm_udbg_txdesc =
 	(u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR;
@@ -207,3 +213,120 @@ dma_addr_t cpm_muram_dma(void __iomem *addr)
 	return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
 }
 EXPORT_SYMBOL(cpm_muram_dma);
+
+#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
+
+struct cpm2_ioports {
+	u32 dir, par, sor, odr, dat;
+	u32 res[3];
+};
+
+struct cpm2_gpio32_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u32 cpdata;
+};
+
+static inline struct cpm2_gpio32_chip *
+to_cpm2_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct cpm2_gpio32_chip, mm_gc);
+}
+
+static void cpm2_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+
+	cpm2_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm2_gc->lock, flags);
+
+	if (value)
+		cpm2_gc->cpdata |= pin_mask;
+	else
+		cpm2_gc->cpdata &= ~pin_mask;
+
+	out_be32(&iop->dat, cpm2_gc->cpdata);
+
+	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+}
+
+static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	setbits32(&iop->dir, pin_mask);
+
+	cpm2_gpio32_set(gc, gpio, val);
+
+	return 0;
+}
+
+static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	clrbits32(&iop->dir, pin_mask);
+
+	return 0;
+}
+
+int cpm2_gpiochip_add32(struct device_node *np)
+{
+	struct cpm2_gpio32_chip *cpm2_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct of_gpio_chip *of_gc;
+	struct gpio_chip *gc;
+
+	cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL);
+	if (!cpm2_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm2_gc->lock);
+
+	mm_gc = &cpm2_gc->mm_gc;
+	of_gc = &mm_gc->of_gc;
+	gc = &of_gc->gc;
+
+	mm_gc->save_regs = cpm2_gpio32_save_regs;
+	of_gc->gpio_cells = 2;
+	gc->ngpio = 32;
+	gc->direction_input = cpm2_gpio32_dir_in;
+	gc->direction_output = cpm2_gpio32_dir_out;
+	gc->get = cpm2_gpio32_get;
+	gc->set = cpm2_gpio32_set;
+
+	return of_mm_gpiochip_add(np, mm_gc);
+}
+#endif /* CONFIG_CPM2 || CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c
index c09ddc0..c1879eb 100644
--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
+++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
@@ -21,6 +21,7 @@ static int  __init add_rtc(void)
 	struct device_node *np;
 	struct platform_device *pd;
 	struct resource res[2];
+	unsigned int num_res = 1;
 	int ret;
 
 	memset(&res, 0, sizeof(res));
@@ -41,14 +42,24 @@ static int  __init add_rtc(void)
 	if (res[0].start != RTC_PORT(0))
 		return -EINVAL;
 
-	/* Use a fixed interrupt value of 8 since on PPC if we are using this
-	 * its off an i8259 which we ensure has interrupt numbers 0..15. */
-	res[1].start = 8;
-	res[1].end = 8;
-	res[1].flags = IORESOURCE_IRQ;
+	np = of_find_compatible_node(NULL, NULL, "chrp,iic");
+	if (!np)
+		np = of_find_compatible_node(NULL, NULL, "pnpPNP,000");
+	if (np) {
+		of_node_put(np);
+		/*
+		 * Use a fixed interrupt value of 8 since on PPC if we are
+		 * using this its off an i8259 which we ensure has interrupt
+		 * numbers 0..15.
+		 */
+		res[1].start = 8;
+		res[1].end = 8;
+		res[1].flags = IORESOURCE_IRQ;
+		num_res++;
+	}
 
 	pd = platform_device_register_simple("rtc_cmos", -1,
-					     &res[0], 2);
+					     &res[0], num_res);
 
 	if (IS_ERR(pd))
 		return PTR_ERR(pd);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2ed8812..8d41908 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -317,6 +317,9 @@ config ARCH_ENABLE_MEMORY_HOTPLUG
 	def_bool y
 	depends on SPARSEMEM
 
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+	def_bool y
+
 source "mm/Kconfig"
 
 comment "I/O subsystem configuration"
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index d003a6e..328a20e 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1732,3 +1732,40 @@ compat_sys_timerfd_gettime_wrapper:
 	lgfr	%r2,%r2			# int
 	llgtr	%r3,%r3			# struct compat_itimerspec *
 	jg	compat_sys_timerfd_gettime
+
+	.globl compat_sys_signalfd4_wrapper
+compat_sys_signalfd4_wrapper:
+	lgfr	%r2,%r2			# int
+	llgtr	%r3,%r3			# compat_sigset_t *
+	llgfr	%r4,%r4			# compat_size_t
+	lgfr	%r5,%r5			# int
+	jg	compat_sys_signalfd4
+
+	.globl sys_eventfd2_wrapper
+sys_eventfd2_wrapper:
+	llgfr	%r2,%r2			# unsigned int
+	lgfr	%r3,%r3			# int
+	jg	sys_eventfd2
+
+	.globl	sys_inotify_init1_wrapper
+sys_inotify_init1_wrapper:
+	lgfr	%r2,%r2			# int
+	jg	sys_inotify_init1
+
+	.globl	sys_pipe2_wrapper
+sys_pipe2_wrapper:
+	llgtr	%r2,%r2			# u32 *
+	lgfr	%r3,%r3			# int
+	jg	sys_pipe2		# branch to system call
+
+	.globl	sys_dup3_wrapper
+sys_dup3_wrapper:
+	llgfr	%r2,%r2			# unsigned int
+	llgfr	%r3,%r3			# unsigned int
+	lgfr	%r4,%r4			# int
+	jg	sys_dup3		# branch to system call
+
+	.globl	sys_epoll_create1_wrapper
+sys_epoll_create1_wrapper:
+	lgfr	%r2,%r2			# int
+	jg	sys_epoll_create1	# branch to system call
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 54b2779..2dcf590f 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -1705,7 +1705,10 @@ void __init setup_ipl(void)
 
 void __init ipl_update_parameters(void)
 {
-	if (diag308(DIAG308_STORE, &ipl_block) == DIAG308_RC_OK)
+	int rc;
+
+	rc = diag308(DIAG308_STORE, &ipl_block);
+	if ((rc == DIAG308_RC_OK) || (rc == DIAG308_RC_NOCONFIG))
 		diag308_set_works = 1;
 }
 
diff --git a/arch/s390/kernel/mem_detect.c b/arch/s390/kernel/mem_detect.c
index 18ed7ab..9872999 100644
--- a/arch/s390/kernel/mem_detect.c
+++ b/arch/s390/kernel/mem_detect.c
@@ -9,27 +9,6 @@
 #include <asm/sclp.h>
 #include <asm/setup.h>
 
-static int memory_fast_detect(struct mem_chunk *chunk)
-{
-	unsigned long val0 = 0;
-	unsigned long val1 = 0xc;
-	int rc = -EOPNOTSUPP;
-
-	if (ipl_flags & IPL_NSS_VALID)
-		return -EOPNOTSUPP;
-	asm volatile(
-		"	diag	%1,%2,0x260\n"
-		"0:	lhi	%0,0\n"
-		"1:\n"
-		EX_TABLE(0b,1b)
-		: "+d" (rc), "+d" (val0), "+d" (val1) : : "cc");
-
-	if (rc || val0 != val1)
-		return -EOPNOTSUPP;
-	chunk->size = val0 + 1;
-	return 0;
-}
-
 static inline int tprot(unsigned long addr)
 {
 	int rc = -EFAULT;
@@ -84,8 +63,6 @@ void detect_memory_layout(struct mem_chunk chunk[])
 	unsigned long flags, cr0;
 
 	memset(chunk, 0, MEMORY_CHUNKS * sizeof(struct mem_chunk));
-	if (memory_fast_detect(&chunk[0]) == 0)
-		return;
 	/* Disable IRQs, DAT and low address protection so tprot does the
 	 * right thing and we don't get scheduled away with low address
 	 * protection disabled.
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index c87ec68..c66d35e 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -330,3 +330,9 @@ SYSCALL(sys_eventfd,sys_eventfd,sys_eventfd_wrapper)
 SYSCALL(sys_timerfd_create,sys_timerfd_create,sys_timerfd_create_wrapper)
 SYSCALL(sys_timerfd_settime,sys_timerfd_settime,compat_sys_timerfd_settime_wrapper) /* 320 */
 SYSCALL(sys_timerfd_gettime,sys_timerfd_gettime,compat_sys_timerfd_gettime_wrapper)
+SYSCALL(sys_signalfd4,sys_signalfd4,compat_sys_signalfd4_wrapper)
+SYSCALL(sys_eventfd2,sys_eventfd2,sys_eventfd2_wrapper)
+SYSCALL(sys_inotify_init1,sys_inotify_init1,sys_inotify_init1_wrapper)
+SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */
+SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper)
+SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index ab70d9b..ca114fe 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -1348,7 +1348,7 @@ early_param("stp", early_parse_stp);
 /*
  * Reset STP attachment.
  */
-static void stp_reset(void)
+static void __init stp_reset(void)
 {
 	int rc;
 
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index eae21a8..fc6ab60 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -43,7 +43,7 @@ void __udelay(unsigned long usecs)
 		local_bh_disable();
 	local_irq_save(flags);
 	if (raw_irqs_disabled_flags(flags)) {
-		old_cc = S390_lowcore.clock_comparator;
+		old_cc = local_tick_disable();
 		S390_lowcore.clock_comparator = -1ULL;
 		__ctl_store(cr0, 0, 0);
 		dummy = (cr0 & 0xffff00e0) | 0x00000800;
@@ -65,7 +65,7 @@ void __udelay(unsigned long usecs)
 
 	if (raw_irqs_disabled_flags(flags)) {
 		__ctl_load(cr0, 0, 0);
-		S390_lowcore.clock_comparator = old_cc;
+		local_tick_enable(old_cc);
 	}
 	if (!irq_context)
 		_local_bh_enable();
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 4993b0f..1169130 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -179,7 +179,7 @@ int arch_add_memory(int nid, u64 start, u64 size)
 	int rc;
 
 	pgdat = NODE_DATA(nid);
-	zone = pgdat->node_zones + ZONE_NORMAL;
+	zone = pgdat->node_zones + ZONE_MOVABLE;
 	rc = vmem_add_mapping(start, size);
 	if (rc)
 		return rc;
@@ -189,3 +189,14 @@ int arch_add_memory(int nid, u64 start, u64 size)
 	return rc;
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
+
+#ifdef CONFIG_MEMORY_HOTREMOVE
+int remove_memory(u64 start, u64 size)
+{
+	unsigned long start_pfn, end_pfn;
+
+	start_pfn = PFN_DOWN(start);
+	end_pfn = start_pfn + PFN_DOWN(size);
+	return offline_pages(start_pfn, end_pfn, 120 * HZ);
+}
+#endif /* CONFIG_MEMORY_HOTREMOVE */
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 0b88dc4..cb992c3 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -24,6 +24,11 @@ config SUPERH32
 config SUPERH64
 	def_bool y if CPU_SH5
 
+config ARCH_DEFCONFIG
+	string
+	default "arch/sh/configs/shx3_defconfig" if SUPERH32
+	default "arch/sh/configs/cayman_defconfig" if SUPERH64
+
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
@@ -348,253 +353,10 @@ config CPU_SUBTYPE_SH5_103
 endchoice
 
 source "arch/sh/mm/Kconfig"
+ 
 source "arch/sh/Kconfig.cpu"
 
-menu "Board support"
-
-config SOLUTION_ENGINE
-	bool
-
-config SH_SOLUTION_ENGINE
-	bool "SolutionEngine"
-	select SOLUTION_ENGINE
-	select CPU_HAS_IPR_IRQ
-	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
-	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
-	  CPU_SUBTYPE_SH7750R 
-	help
-	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
-	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
-
-config SH_7206_SOLUTION_ENGINE
-	bool "SolutionEngine7206"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7206
-	help
-	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
-	  evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
-	bool "SolutionEngine7619"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7619
-	help
-	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
-	  evaluation board.
-	
-config SH_7721_SOLUTION_ENGINE
-	bool "SolutionEngine7721"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7721
-	help
-	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
-	  evaluation board.
-
-config SH_7722_SOLUTION_ENGINE
-	bool "SolutionEngine7722"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7722
-	help
-	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
-	  evaluation board.
-
-config SH_7751_SOLUTION_ENGINE
-	bool "SolutionEngine7751"
-	select SOLUTION_ENGINE
-	select CPU_HAS_IPR_IRQ
-	depends on CPU_SUBTYPE_SH7751
-	help
-	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
-	  evaluation board.
-	  
-config SH_7780_SOLUTION_ENGINE
-	bool "SolutionEngine7780"
-	select SOLUTION_ENGINE
-	select SYS_SUPPORTS_PCI
-	depends on CPU_SUBTYPE_SH7780
-	help
-	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
-	  evaluation board.
-
-config SH_7343_SOLUTION_ENGINE
-	bool "SolutionEngine7343"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7343
-	help
-	  Select 7343 SolutionEngine if configuring for a Hitachi
-	  SH7343 (SH-Mobile 3AS) evaluation board.
-
-config SH_7751_SYSTEMH
-	bool "SystemH7751R"
-	depends on CPU_SUBTYPE_SH7751R
-	help
-	  Select SystemH if you are configuring for a Renesas SystemH
-	  7751R evaluation board.
-
-config SH_HP6XX
-	bool "HP6XX"
-	select SYS_SUPPORTS_APM_EMULATION
-	select HD6446X_SERIES
-	depends on CPU_SUBTYPE_SH7709
-	help
-	  Select HP6XX if configuring for a HP jornada HP6xx.
-	  More information (hardware only) at
-	  <http://www.hp.com/jornada/>.
-
-config SH_DREAMCAST
-	bool "Dreamcast"
-	select SYS_SUPPORTS_PCI
-	depends on CPU_SUBTYPE_SH7091
-	help
-	  Select Dreamcast if configuring for a SEGA Dreamcast.
-	  More information at <http://www.linux-sh.org>
-
-config SH_SH03
-	bool "Interface CTP/PCI-SH03"
-	depends on CPU_SUBTYPE_SH7751
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  CTP/PCI-SH03 is a CPU module computer that is produced
-	  by Interface Corporation.
-	  More information at <http://www.interface.co.jp>
-
-config SH_SECUREEDGE5410
-	bool "SecureEdge5410"
-	depends on CPU_SUBTYPE_SH7751R
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  Select SecureEdge5410 if configuring for a SnapGear SH board.
-	  This includes both the OEM SecureEdge products as well as the
-	  SME product line.
-
-config SH_RTS7751R2D
-	bool "RTS7751R2D"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
-	help
-	  Select RTS7751R2D if configuring for a Renesas Technology
-	  Sales SH-Graphics board.
-
-config SH_RSK7203
-	bool "RSK7203"
-	depends on CPU_SUBTYPE_SH7203
-
-config SH_SDK7780
-	bool "SDK7780R3"
-	depends on CPU_SUBTYPE_SH7780
-	select SYS_SUPPORTS_PCI
-	help
-	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
-	  evaluation board.
-
-config SH_HIGHLANDER
-	bool "Highlander"
-	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
-	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
-
-config SH_SH7785LCR
-	bool "SH7785LCR"
-	depends on CPU_SUBTYPE_SH7785
-	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
-
-config SH_SH7785LCR_29BIT_PHYSMAPS
-	bool "SH7785LCR 29bit physmaps"
-	depends on SH_SH7785LCR
-	default y
-	help
-	  This board has 2 physical memory maps. It can be changed with
-	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
-	  you can access all on-board device in 29bit address mode.
-
-config SH_MIGOR
-	bool "Migo-R"
-	depends on CPU_SUBTYPE_SH7722
-	help
-	  Select Migo-R if configuring for the SH7722 Migo-R platform
-          by Renesas System Solutions Asia Pte. Ltd.
-
-config SH_AP325RXA
-	bool "AP-325RXA"
-	depends on CPU_SUBTYPE_SH7723
-	help
-	  Renesas "AP-325RXA" support.
-	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
-
-config SH_SH7763RDP
-	bool "SH7763RDP"
-	depends on CPU_SUBTYPE_SH7763
-	help
-	  Select SH7763RDP if configuring for a Renesas SH7763
-	  evaluation board.
-
-config SH_EDOSK7705
-	bool "EDOSK7705"
-	depends on CPU_SUBTYPE_SH7705
-
-config SH_SH4202_MICRODEV
-	bool "SH4-202 MicroDev"
-	depends on CPU_SUBTYPE_SH4_202
-	help
-	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
-	  with an SH4-202 CPU.
-
-config SH_LANDISK
-	bool "LANDISK"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	help
-	  I-O DATA DEVICE, INC. "LANDISK Series" support.
-
-config SH_TITAN
-	bool "TITAN"
-	depends on CPU_SUBTYPE_SH7751R
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  Select Titan if you are configuring for a Nimble Microsystems
-	  NetEngine NP51R.
-
-config SH_SHMIN
-	bool "SHMIN"
-	depends on CPU_SUBTYPE_SH7706
-	select CPU_HAS_IPR_IRQ
-	help
-	  Select SHMIN if configuring for the SHMIN board.
-
-config SH_LBOX_RE2
-	bool "L-BOX RE2"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	help
-	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-
-config SH_X3PROTO
-	bool "SH-X3 Prototype board"
-	depends on CPU_SUBTYPE_SHX3
-
-config SH_MAGIC_PANEL_R2
-	bool "Magic Panel R2"
-	depends on CPU_SUBTYPE_SH7720
-	help
-	  Select Magic Panel R2 if configuring for Magic Panel R2.
-
-config SH_CAYMAN
-	bool "Hitachi Cayman"
-	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
-	select SYS_SUPPORTS_PCI
-
-endmenu
-
-source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
-source "arch/sh/boards/renesas/r7780rp/Kconfig"
-source "arch/sh/boards/renesas/sdk7780/Kconfig"
-source "arch/sh/boards/renesas/migor/Kconfig"
-source "arch/sh/boards/magicpanelr2/Kconfig"
+source "arch/sh/boards/Kconfig"
 
 menu "Timer and clock configuration"
 
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index c627e45..25659ce 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -68,7 +68,7 @@ OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment \
 defaultimage-$(CONFIG_SUPERH32)	:= zImage
 
 # Set some sensible Kbuild defaults
-KBUILD_DEFCONFIG	:= r7780mp_defconfig
+KBUILD_DEFCONFIG	:= shx3_defconfig
 KBUILD_IMAGE		:= $(defaultimage-y)
 
 #
@@ -91,51 +91,34 @@ LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64+4'
 LDFLAGS			+= -EB
 endif
 
-KBUILD_CFLAGS		+= -pipe $(cflags-y)
-KBUILD_AFLAGS		+= $(cflags-y)
-
 head-y			:= arch/sh/kernel/init_task.o
 head-$(CONFIG_SUPERH32)	+= arch/sh/kernel/head_32.o
 head-$(CONFIG_SUPERH64)	+= arch/sh/kernel/head_64.o
 
 LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
-core-y				+= arch/sh/kernel/ arch/sh/mm/
+core-y				+= arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
 core-$(CONFIG_SH_FPU_EMU)	+= arch/sh/math-emu/
 
-# Boards
-machdir-$(CONFIG_SH_SOLUTION_ENGINE)		+= se/770x
-machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= se/7722
-machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= se/7751
-machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= se/7780
-machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= se/7343
-machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= se/7721
-machdir-$(CONFIG_SH_HP6XX)			+= hp6xx
-machdir-$(CONFIG_SH_DREAMCAST)			+= dreamcast
-machdir-$(CONFIG_SH_SH03)			+= sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410)		+= snapgear
-machdir-$(CONFIG_SH_RTS7751R2D)			+= renesas/rts7751r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH)		+= renesas/systemh
-machdir-$(CONFIG_SH_EDOSK7705)			+= renesas/edosk7705
-machdir-$(CONFIG_SH_HIGHLANDER)			+= renesas/r7780rp
-machdir-$(CONFIG_SH_MIGOR)			+= renesas/migor
-machdir-$(CONFIG_SH_SDK7780)			+= renesas/sdk7780
-machdir-$(CONFIG_SH_X3PROTO)			+= renesas/x3proto
-machdir-$(CONFIG_SH_RSK7203)			+= renesas/rsk7203
-machdir-$(CONFIG_SH_AP325RXA)			+= renesas/ap325rxa
-machdir-$(CONFIG_SH_SH7763RDP)			+= renesas/sh7763rdp
-machdir-$(CONFIG_SH_SH7785LCR)			+= renesas/sh7785lcr
-machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= superh/microdev
-machdir-$(CONFIG_SH_LANDISK)			+= landisk
-machdir-$(CONFIG_SH_TITAN)			+= titan
-machdir-$(CONFIG_SH_SHMIN)			+= shmin
-machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= se/7206
-machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= se/7619
-machdir-$(CONFIG_SH_LBOX_RE2)			+= lboxre2
-machdir-$(CONFIG_SH_MAGIC_PANEL_R2)		+= magicpanelr2
-machdir-$(CONFIG_SH_CAYMAN)			+= cayman
-
-incdir-y	:= $(notdir $(machdir-y))
+# Mach groups
+machdir-$(CONFIG_SOLUTION_ENGINE)		+= mach-se
+machdir-$(CONFIG_SH_HP6XX)			+= mach-hp6xx
+machdir-$(CONFIG_SH_DREAMCAST)			+= mach-dreamcast
+machdir-$(CONFIG_SH_SH03)			+= mach-sh03
+machdir-$(CONFIG_SH_SECUREEDGE5410)		+= mach-snapgear
+machdir-$(CONFIG_SH_RTS7751R2D)			+= mach-r2d
+machdir-$(CONFIG_SH_7751_SYSTEMH)		+= mach-systemh
+machdir-$(CONFIG_SH_EDOSK7705)			+= mach-edosk7705
+machdir-$(CONFIG_SH_HIGHLANDER)			+= mach-highlander
+machdir-$(CONFIG_SH_MIGOR)			+= mach-migor
+machdir-$(CONFIG_SH_SDK7780)			+= mach-sdk7780
+machdir-$(CONFIG_SH_X3PROTO)			+= mach-x3proto
+machdir-$(CONFIG_SH_SH7763RDP)			+= mach-sh7763rdp
+machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= mach-microdev
+machdir-$(CONFIG_SH_LANDISK)			+= mach-landisk
+machdir-$(CONFIG_SH_TITAN)			+= mach-titan
+machdir-$(CONFIG_SH_LBOX_RE2)			+= mach-lboxre2
+machdir-$(CONFIG_SH_CAYMAN)			+= mach-cayman
 
 ifneq ($(machdir-y),)
 core-y	+= $(addprefix arch/sh/boards/, \
@@ -145,11 +128,22 @@ endif
 # Companion chips
 core-$(CONFIG_HD6446X_SERIES)	+= arch/sh/cchips/hd6446x/
 
-cpuincdir-$(CONFIG_CPU_SH2)	:= cpu-sh2
-cpuincdir-$(CONFIG_CPU_SH2A)	:= cpu-sh2a
-cpuincdir-$(CONFIG_CPU_SH3)	:= cpu-sh3
-cpuincdir-$(CONFIG_CPU_SH4)	:= cpu-sh4
-cpuincdir-$(CONFIG_CPU_SH5)	:= cpu-sh5
+#
+# CPU header paths
+#
+# These are ordered by optimization level. A CPU family that is a subset
+# of another (ie, SH-2A / SH-2), is picked up first, with increasing
+# levels of genericness if nothing more suitable is situated in the
+# hierarchy.
+#
+# As an example, in order of preference, SH-2A > SH-2 > common definitions.
+#
+cpuincdir-$(CONFIG_CPU_SH2A)	+= cpu-sh2a
+cpuincdir-$(CONFIG_CPU_SH2)	+= cpu-sh2
+cpuincdir-$(CONFIG_CPU_SH3)	+= cpu-sh3
+cpuincdir-$(CONFIG_CPU_SH4)	+= cpu-sh4
+cpuincdir-$(CONFIG_CPU_SH5)	+= cpu-sh5
+cpuincdir-y			+= cpu-common	# Must be last
 
 libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
 libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
@@ -160,57 +154,17 @@ drivers-$(CONFIG_OPROFILE)	+= arch/sh/oprofile/
 
 boot := arch/sh/boot
 
-ifneq ($(KBUILD_SRC),)
-incdir-prefix	:= $(srctree)/include/asm-sh/
-else
-incdir-prefix	:=
-endif
-
-#	Update machine arch and proc symlinks if something which affects
-#	them changed.  We use .arch and .mach to indicate when they were
-#	updated last, otherwise make uses the target directory mtime.
-
-include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \
-		     include/config/auto.conf FORCE
-	@echo '  SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)'
-	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
-	$(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu
-	@touch $@
+cflags-y	+= $(foreach d, $(cpuincdir-y), -Iarch/sh/include/$(d)) \
+		   $(foreach d, $(machdir-y), -Iarch/sh/include/$(d))
 
-#	Most boards have their own mach directories.  For the ones that
-#	don't, just reference the parent directory so the semantics are
-#	kept roughly the same.
-#
-#	When multiple boards are compiled in at the same time, preference
-#	for the mach link is given to whichever has a directory for its
-#	headers. However, this is only a workaround until platforms that
-#	can live in the same kernel image back away from relying on the
-#	mach link.
-
-include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
-		      include/config/auto.conf FORCE
-	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
-	$(Q)rm -f include/asm-sh/mach
-	$(Q)for i in $(incdir-y); do \
-	if [ -d $(srctree)/include/asm-sh/$$i ]; then \
-		echo -n '  SYMLINK include/asm-sh/mach -> '; \
-		echo -e "include/asm-sh/$$i"; \
-		ln -fsn $(incdir-prefix)$$i \
-			include/asm-sh/mach; \
-	else \
-		if [ ! -d include/asm-sh/mach ]; then \
-			echo -n '  SYMLINK include/asm-sh/mach -> '; \
-			echo -e 'include/asm-sh'; \
-			ln -fsn $(incdir-prefix)../asm-sh include/asm-sh/mach; \
-		fi; \
-	fi; \
-	done
-	@touch $@
+KBUILD_CFLAGS		+= -pipe $(cflags-y)
+KBUILD_CPPFLAGS		+= $(cflags-y)
+KBUILD_AFLAGS		+= $(cflags-y)
 
 PHONY += maketools FORCE
 
 maketools:  include/linux/version.h FORCE
-	$(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h
+	$(Q)$(MAKE) $(build)=arch/sh/tools arch/sh/include/asm/machtypes.h
 
 all: $(KBUILD_IMAGE)
 
@@ -219,8 +173,7 @@ zImage uImage uImage.srec vmlinux.srec: vmlinux
 
 compressed: zImage
 
-archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools \
-	     arch/sh/lib64/syscalltab.h
+archprepare: maketools arch/sh/lib64/syscalltab.h
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
@@ -262,6 +215,4 @@ arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S
 	$(call filechk,gen-syscalltab)
 
 CLEAN_FILES += arch/sh/lib64/syscalltab.h \
-	       include/asm-sh/machtypes.h \
-	       include/asm-sh/cpu include/asm-sh/.cpu \
-	       include/asm-sh/mach include/asm-sh/.mach
+	       arch/sh/include/asm/machtypes.h
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
new file mode 100644
index 0000000..ae19486
--- /dev/null
+++ b/arch/sh/boards/Kconfig
@@ -0,0 +1,258 @@
+menu "Board support"
+
+config SOLUTION_ENGINE
+	bool
+
+config SH_SOLUTION_ENGINE
+	bool "SolutionEngine"
+	select SOLUTION_ENGINE
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
+	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+	  CPU_SUBTYPE_SH7750R 
+	help
+	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
+
+config SH_7206_SOLUTION_ENGINE
+	bool "SolutionEngine7206"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7206
+	help
+	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+	  evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+	bool "SolutionEngine7619"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7619
+	help
+	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+	  evaluation board.
+	
+config SH_7721_SOLUTION_ENGINE
+	bool "SolutionEngine7721"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7721
+	help
+	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
+	  evaluation board.
+
+config SH_7722_SOLUTION_ENGINE
+	bool "SolutionEngine7722"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7722
+	help
+	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
+	  evaluation board.
+
+config SH_7751_SOLUTION_ENGINE
+	bool "SolutionEngine7751"
+	select SOLUTION_ENGINE
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7751
+	help
+	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
+	  evaluation board.
+	  
+config SH_7780_SOLUTION_ENGINE
+	bool "SolutionEngine7780"
+	select SOLUTION_ENGINE
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
+	  evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+	bool "SolutionEngine7343"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7343
+	help
+	  Select 7343 SolutionEngine if configuring for a Hitachi
+	  SH7343 (SH-Mobile 3AS) evaluation board.
+
+config SH_7751_SYSTEMH
+	bool "SystemH7751R"
+	depends on CPU_SUBTYPE_SH7751R
+	help
+	  Select SystemH if you are configuring for a Renesas SystemH
+	  7751R evaluation board.
+
+config SH_HP6XX
+	bool "HP6XX"
+	select SYS_SUPPORTS_APM_EMULATION
+	select HD6446X_SERIES
+	depends on CPU_SUBTYPE_SH7709
+	help
+	  Select HP6XX if configuring for a HP jornada HP6xx.
+	  More information (hardware only) at
+	  <http://www.hp.com/jornada/>.
+
+config SH_DREAMCAST
+	bool "Dreamcast"
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7091
+	help
+	  Select Dreamcast if configuring for a SEGA Dreamcast.
+	  More information at <http://www.linux-sh.org>
+
+config SH_SH03
+	bool "Interface CTP/PCI-SH03"
+	depends on CPU_SUBTYPE_SH7751
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  CTP/PCI-SH03 is a CPU module computer that is produced
+	  by Interface Corporation.
+	  More information at <http://www.interface.co.jp>
+
+config SH_SECUREEDGE5410
+	bool "SecureEdge5410"
+	depends on CPU_SUBTYPE_SH7751R
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  Select SecureEdge5410 if configuring for a SnapGear SH board.
+	  This includes both the OEM SecureEdge products as well as the
+	  SME product line.
+
+config SH_RTS7751R2D
+	bool "RTS7751R2D"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+	help
+	  Select RTS7751R2D if configuring for a Renesas Technology
+	  Sales SH-Graphics board.
+
+config SH_RSK7203
+	bool "RSK7203"
+	depends on CPU_SUBTYPE_SH7203
+
+config SH_SDK7780
+	bool "SDK7780R3"
+	depends on CPU_SUBTYPE_SH7780
+	select SYS_SUPPORTS_PCI
+	help
+	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
+	  evaluation board.
+
+config SH_HIGHLANDER
+	bool "Highlander"
+	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+
+config SH_SH7785LCR
+	bool "SH7785LCR"
+	depends on CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+	bool "SH7785LCR 29bit physmaps"
+	depends on SH_SH7785LCR
+	default y
+	help
+	  This board has 2 physical memory maps. It can be changed with
+	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+	  you can access all on-board device in 29bit address mode.
+
+config SH_MIGOR
+	bool "Migo-R"
+	depends on CPU_SUBTYPE_SH7722
+	help
+	  Select Migo-R if configuring for the SH7722 Migo-R platform
+          by Renesas System Solutions Asia Pte. Ltd.
+
+config SH_AP325RXA
+	bool "AP-325RXA"
+	depends on CPU_SUBTYPE_SH7723
+	help
+	  Renesas "AP-325RXA" support.
+	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+
+config SH_SH7763RDP
+	bool "SH7763RDP"
+	depends on CPU_SUBTYPE_SH7763
+	help
+	  Select SH7763RDP if configuring for a Renesas SH7763
+	  evaluation board.
+
+config SH_EDOSK7705
+	bool "EDOSK7705"
+	depends on CPU_SUBTYPE_SH7705
+
+config SH_SH4202_MICRODEV
+	bool "SH4-202 MicroDev"
+	depends on CPU_SUBTYPE_SH4_202
+	help
+	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+	  with an SH4-202 CPU.
+
+config SH_LANDISK
+	bool "LANDISK"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	help
+	  I-O DATA DEVICE, INC. "LANDISK Series" support.
+
+config SH_TITAN
+	bool "TITAN"
+	depends on CPU_SUBTYPE_SH7751R
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  Select Titan if you are configuring for a Nimble Microsystems
+	  NetEngine NP51R.
+
+config SH_SHMIN
+	bool "SHMIN"
+	depends on CPU_SUBTYPE_SH7706
+	select CPU_HAS_IPR_IRQ
+	help
+	  Select SHMIN if configuring for the SHMIN board.
+
+config SH_LBOX_RE2
+	bool "L-BOX RE2"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	help
+	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+
+config SH_X3PROTO
+	bool "SH-X3 Prototype board"
+	depends on CPU_SUBTYPE_SHX3
+
+config SH_MAGIC_PANEL_R2
+	bool "Magic Panel R2"
+	depends on CPU_SUBTYPE_SH7720
+	help
+	  Select Magic Panel R2 if configuring for Magic Panel R2.
+
+config SH_CAYMAN
+	bool "Hitachi Cayman"
+	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
+	select SYS_SUPPORTS_PCI
+
+endmenu
+
+source "arch/sh/boards/mach-r2d/Kconfig"
+source "arch/sh/boards/mach-highlander/Kconfig"
+source "arch/sh/boards/mach-sdk7780/Kconfig"
+source "arch/sh/boards/mach-migor/Kconfig"
+
+if SH_MAGIC_PANEL_R2
+
+menu "Magic Panel R2 options"
+
+config SH_MAGIC_PANEL_R2_VERSION
+	int SH_MAGIC_PANEL_R2_VERSION
+	default "3"
+	help
+	  Set the version of the Magic Panel R2
+
+endmenu
+
+endif
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
new file mode 100644
index 0000000..ff9b93c
--- /dev/null
+++ b/arch/sh/boards/Makefile
@@ -0,0 +1,8 @@
+#
+# Specific board support, not covered by a mach group.
+#
+obj-$(CONFIG_SH_AP325RXA)	+= board-ap325rxa.o
+obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
+obj-$(CONFIG_SH_RSK7203)	+= board-rsk7203.o
+obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
+obj-$(CONFIG_SH_SHMIN)		+= board-shmin..o
diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/board-ap325rxa.c
index 7fa7446..9c71603 100644
--- a/arch/sh/boards/renesas/ap325rxa/setup.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -165,6 +165,7 @@ static struct platform_device lcdc_device = {
 	},
 };
 
+#ifdef CONFIG_I2C
 static unsigned char camera_ncm03j_magic[] =
 {
 	0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
@@ -234,6 +235,7 @@ static struct platform_device camera_device = {
 		.platform_data	= &camera_info,
 	},
 };
+#endif /* CONFIG_I2C */
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
@@ -270,7 +272,9 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
 	&ap325rxa_nor_flash_device,
 	&lcdc_device,
 	&ceu_device,
+#ifdef CONFIG_I2C
 	&camera_device,
+#endif
 };
 
 static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
diff --git a/arch/sh/boards/magicpanelr2/setup.c b/arch/sh/boards/board-magicpanelr2.c
index f3b8b07..f3b8b07 100644
--- a/arch/sh/boards/magicpanelr2/setup.c
+++ b/arch/sh/boards/board-magicpanelr2.c
diff --git a/arch/sh/boards/renesas/rsk7203/setup.c b/arch/sh/boards/board-rsk7203.c
index 0bbda04..ffbedc5 100644
--- a/arch/sh/boards/renesas/rsk7203/setup.c
+++ b/arch/sh/boards/board-rsk7203.c
@@ -10,13 +10,20 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/platform_device.h>
+#include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/map.h>
+#include <linux/smc911x.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 
+static struct smc911x_platdata smc911x_info = {
+	.flags		= SMC911X_USE_16BIT,
+	.irq_flags	= IRQF_TRIGGER_LOW,
+};
+
 static struct resource smc911x_resources[] = {
 	[0] = {
 		.start		= 0x24000000,
@@ -35,6 +42,9 @@ static struct platform_device smc911x_device = {
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(smc911x_resources),
 	.resource	= smc911x_resources,
+	.dev		= {
+		.platform_data = &smc911x_info,
+	},
 };
 
 static const char *probes[] = { "cmdlinepart", NULL };
diff --git a/arch/sh/boards/renesas/sh7785lcr/setup.c b/arch/sh/boards/board-sh7785lcr.c
index b95d674..b95d674 100644
--- a/arch/sh/boards/renesas/sh7785lcr/setup.c
+++ b/arch/sh/boards/board-sh7785lcr.c
diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/board-shmin.c
index 16e5dae..16e5dae 100644
--- a/arch/sh/boards/shmin/setup.c
+++ b/arch/sh/boards/board-shmin.c
diff --git a/arch/sh/boards/cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile
index 489a8f8..489a8f8 100644
--- a/arch/sh/boards/cayman/Makefile
+++ b/arch/sh/boards/mach-cayman/Makefile
diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
index 30ec7be..ceb37ae 100644
--- a/arch/sh/boards/cayman/irq.c
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -13,7 +13,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/signal.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include <asm/page.h>
 
 /* Setup for the SMSC FDC37C935 / LAN91C100FD */
diff --git a/arch/sh/boards/cayman/led.c b/arch/sh/boards/mach-cayman/led.c
index a808eac..a808eac 100644
--- a/arch/sh/boards/cayman/led.c
+++ b/arch/sh/boards/mach-cayman/led.c
diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c
index 8c9fa47..e7f9cc5 100644
--- a/arch/sh/boards/cayman/setup.c
+++ b/arch/sh/boards/mach-cayman/setup.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 
 /*
  * Platform Dependent Interrupt Priorities.
diff --git a/arch/sh/boards/dreamcast/Makefile b/arch/sh/boards/mach-dreamcast/Makefile
index 7b97546..7b97546 100644
--- a/arch/sh/boards/dreamcast/Makefile
+++ b/arch/sh/boards/mach-dreamcast/Makefile
diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
index 9d0673a..67bdc33 100644
--- a/arch/sh/boards/dreamcast/irq.c
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -12,7 +12,7 @@
 #include <linux/irq.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/dreamcast/sysasic.h>
+#include <mach/sysasic.h>
 
 /* Dreamcast System ASIC Hardware Events -
 
diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c
index a743368..a743368 100644
--- a/arch/sh/boards/dreamcast/rtc.c
+++ b/arch/sh/boards/mach-dreamcast/rtc.c
diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
index 2581c8c..7d944fc 100644
--- a/arch/sh/boards/dreamcast/setup.c
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -26,7 +26,7 @@
 #include <asm/irq.h>
 #include <asm/rtc.h>
 #include <asm/machvec.h>
-#include <asm/mach/sysasic.h>
+#include <mach/sysasic.h>
 
 extern struct hw_interrupt_type systemasic_int;
 extern void aica_time_init(void);
diff --git a/arch/sh/boards/renesas/edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
index 14bdd53..14bdd53 100644
--- a/arch/sh/boards/renesas/edosk7705/Makefile
+++ b/arch/sh/boards/mach-edosk7705/Makefile
diff --git a/arch/sh/boards/renesas/edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
index 541cea2..541cea2 100644
--- a/arch/sh/boards/renesas/edosk7705/io.c
+++ b/arch/sh/boards/mach-edosk7705/io.c
diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
index f076c45..f076c45 100644
--- a/arch/sh/boards/renesas/edosk7705/setup.c
+++ b/arch/sh/boards/mach-edosk7705/setup.c
diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/mach-highlander/Kconfig
index fc8f28e..fc8f28e 100644
--- a/arch/sh/boards/renesas/r7780rp/Kconfig
+++ b/arch/sh/boards/mach-highlander/Kconfig
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/mach-highlander/Makefile
index 20a1008..20a1008 100644
--- a/arch/sh/boards/renesas/r7780rp/Makefile
+++ b/arch/sh/boards/mach-highlander/Makefile
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c
index ae1cfcb..ae1cfcb 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c
index 9d3921f..9d3921f 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c
index 896c045..896c045 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c
diff --git a/arch/sh/boards/renesas/r7780rp/psw.c b/arch/sh/boards/mach-highlander/psw.c
index c844dfa..be8d547 100644
--- a/arch/sh/boards/renesas/r7780rp/psw.c
+++ b/arch/sh/boards/mach-highlander/psw.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <asm/mach/r7780rp.h>
+#include <asm/r7780rp.h>
 #include <asm/push-switch.h>
 
 static irqreturn_t psw_irq_handler(int irq, void *arg)
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/mach-highlander/setup.c
index bc79afb..bc79afb 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/mach-hp6xx/Makefile
index b312427..b312427 100644
--- a/arch/sh/boards/hp6xx/Makefile
+++ b/arch/sh/boards/mach-hp6xx/Makefile
diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
index 177f4f0..177f4f0 100644
--- a/arch/sh/boards/hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
index d22f6ea..e96684d 100644
--- a/arch/sh/boards/hp6xx/pm.c
+++ b/arch/sh/boards/mach-hp6xx/pm.c
@@ -13,7 +13,7 @@
 #include <asm/io.h>
 #include <asm/hd64461.h>
 #include <asm/hp6xx.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
 #include <asm/pm.h>
 
 #define STBCR		0xffffff82
diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
index 45e9bf0..44b648c 100644
--- a/arch/sh/boards/hp6xx/pm_wakeup.S
+++ b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
@@ -8,7 +8,7 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 
 #define k0	r0
 #define k1	r1
diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
index 2f414ac..475b46c 100644
--- a/arch/sh/boards/hp6xx/setup.c
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -16,7 +16,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hp6xx.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
 
 #define	SCPCR	0xa4000116
 #define	SCPDR	0xa4000136
diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/mach-landisk/Makefile
index a696b42..a696b42 100644
--- a/arch/sh/boards/landisk/Makefile
+++ b/arch/sh/boards/mach-landisk/Makefile
diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
index 0c15b0a..25cdf735 100644
--- a/arch/sh/boards/landisk/gio.c
+++ b/arch/sh/boards/mach-landisk/gio.c
@@ -20,8 +20,8 @@
 #include <linux/fs.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
-#include <asm/landisk/gio.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/gio.h>
+#include <mach-landisk/mach/iodata_landisk.h>
 
 #define DEVCOUNT                4
 #define GIO_MINOR	        2	/* GIO minor no. */
diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c
index 2586494..7b284cd 100644
--- a/arch/sh/boards/landisk/irq.c
+++ b/arch/sh/boards/mach-landisk/irq.c
@@ -16,7 +16,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/iodata_landisk.h>
 
 static void disable_landisk_irq(unsigned int irq)
 {
diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c
index 5a9b70b..e6b0efa 100644
--- a/arch/sh/boards/landisk/psw.c
+++ b/arch/sh/boards/mach-landisk/psw.c
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/iodata_landisk.h>
 #include <asm/push-switch.h>
 
 static irqreturn_t psw_irq_handler(int irq, void *arg)
diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
index 2b708ec..db22ea2 100644
--- a/arch/sh/boards/landisk/setup.c
+++ b/arch/sh/boards/mach-landisk/setup.c
@@ -18,7 +18,7 @@
 #include <linux/pm.h>
 #include <linux/mm.h>
 #include <asm/machvec.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/iodata_landisk.h>
 #include <asm/io.h>
 
 void init_landisk_IRQ(void);
diff --git a/arch/sh/boards/lboxre2/Makefile b/arch/sh/boards/mach-lboxre2/Makefile
index e9ed140..e9ed140 100644
--- a/arch/sh/boards/lboxre2/Makefile
+++ b/arch/sh/boards/mach-lboxre2/Makefile
diff --git a/arch/sh/boards/lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c
index 5a1c3bb..5a1c3bb 100644
--- a/arch/sh/boards/lboxre2/irq.c
+++ b/arch/sh/boards/mach-lboxre2/irq.c
diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c
index c74440d..c74440d 100644
--- a/arch/sh/boards/lboxre2/setup.c
+++ b/arch/sh/boards/mach-lboxre2/setup.c
diff --git a/arch/sh/boards/superh/microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile
index 1387dd6c..1387dd6c 100644
--- a/arch/sh/boards/superh/microdev/Makefile
+++ b/arch/sh/boards/mach-microdev/Makefile
diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/mach-microdev/io.c
index 9f8a540..9f8a540 100644
--- a/arch/sh/boards/superh/microdev/io.c
+++ b/arch/sh/boards/mach-microdev/io.c
diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
index 4d33507..4d33507 100644
--- a/arch/sh/boards/superh/microdev/irq.c
+++ b/arch/sh/boards/mach-microdev/irq.c
diff --git a/arch/sh/boards/superh/microdev/led.c b/arch/sh/boards/mach-microdev/led.c
index 36e54b4..36e54b4 100644
--- a/arch/sh/boards/superh/microdev/led.c
+++ b/arch/sh/boards/mach-microdev/led.c
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
index fc8cd06..fc8cd06 100644
--- a/arch/sh/boards/superh/microdev/setup.c
+++ b/arch/sh/boards/mach-microdev/setup.c
diff --git a/arch/sh/boards/renesas/migor/Kconfig b/arch/sh/boards/mach-migor/Kconfig
index a7b3b72..a7b3b72 100644
--- a/arch/sh/boards/renesas/migor/Kconfig
+++ b/arch/sh/boards/mach-migor/Kconfig
diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/mach-migor/Makefile
index 5f231dd..5f231dd 100644
--- a/arch/sh/boards/renesas/migor/Makefile
+++ b/arch/sh/boards/mach-migor/Makefile
diff --git a/arch/sh/boards/renesas/migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c
index 6e96095..6e96095 100644
--- a/arch/sh/boards/renesas/migor/lcd_qvga.c
+++ b/arch/sh/boards/mach-migor/lcd_qvga.c
diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 7bd365a..e499ee3 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -304,6 +304,7 @@ static void camera_power_off(void)
 	ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR);
 }
 
+#ifdef CONFIG_I2C
 static unsigned char camera_ov772x_magic[] =
 {
 	0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01,
@@ -391,6 +392,7 @@ static struct platform_device migor_camera_device = {
 		.platform_data	= &ov772x_info,
 	},
 };
+#endif /* CONFIG_I2C */
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
@@ -429,7 +431,9 @@ static struct platform_device *migor_devices[] __initdata = {
 	&sh_keysc_device,
 	&migor_lcdc_device,
 	&migor_ceu_device,
+#ifdef CONFIG_I2C
 	&migor_camera_device,
+#endif
 	&migor_nor_flash_device,
 	&migor_nand_flash_device,
 };
diff --git a/arch/sh/boards/renesas/rts7751r2d/Kconfig b/arch/sh/boards/mach-r2d/Kconfig
index 8122a96..8122a96 100644
--- a/arch/sh/boards/renesas/rts7751r2d/Kconfig
+++ b/arch/sh/boards/mach-r2d/Kconfig
diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/mach-r2d/Makefile
index 0d4c75a..0d4c75a 100644
--- a/arch/sh/boards/renesas/rts7751r2d/Makefile
+++ b/arch/sh/boards/mach-r2d/Makefile
diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
index 8e49f6e..8e49f6e 100644
--- a/arch/sh/boards/renesas/rts7751r2d/irq.c
+++ b/arch/sh/boards/mach-r2d/irq.c
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
index 2308e87..2308e87 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/mach-r2d/setup.c
diff --git a/arch/sh/boards/renesas/sdk7780/Kconfig b/arch/sh/boards/mach-sdk7780/Kconfig
index 065f1df..065f1df 100644
--- a/arch/sh/boards/renesas/sdk7780/Kconfig
+++ b/arch/sh/boards/mach-sdk7780/Kconfig
diff --git a/arch/sh/boards/renesas/sdk7780/Makefile b/arch/sh/boards/mach-sdk7780/Makefile
index 3d8f0be..3d8f0be 100644
--- a/arch/sh/boards/renesas/sdk7780/Makefile
+++ b/arch/sh/boards/mach-sdk7780/Makefile
diff --git a/arch/sh/boards/renesas/sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c
index 87cdc57..87cdc57 100644
--- a/arch/sh/boards/renesas/sdk7780/irq.c
+++ b/arch/sh/boards/mach-sdk7780/irq.c
diff --git a/arch/sh/boards/renesas/sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
index acc5932..acc5932 100644
--- a/arch/sh/boards/renesas/sdk7780/setup.c
+++ b/arch/sh/boards/mach-sdk7780/setup.c
diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile
index 63e7ed6..63e7ed6 100644
--- a/arch/sh/boards/se/7206/Makefile
+++ b/arch/sh/boards/mach-se/7206/Makefile
diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
index 1308e61..9c3a332 100644
--- a/arch/sh/boards/se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <asm/io.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
 
 
 static inline void delay(void)
diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
index 9d5bfc7..aef7f05 100644
--- a/arch/sh/boards/se/7206/irq.c
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -10,7 +10,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
 
 #define INTSTS0 0x31800000
 #define INTSTS1 0x31800002
diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
index 4fe84cc..f5466384 100644
--- a/arch/sh/boards/se/7206/setup.c
+++ b/arch/sh/boards/mach-se/7206/setup.c
@@ -10,7 +10,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
 #include <asm/io.h>
 #include <asm/machvec.h>
 #include <asm/heartbeat.h>
diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile
index 3024796..3024796 100644
--- a/arch/sh/boards/se/7343/Makefile
+++ b/arch/sh/boards/mach-se/7343/Makefile
diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/mach-se/7343/io.c
index 3a6d114..8741abc 100644
--- a/arch/sh/boards/se/7343/io.c
+++ b/arch/sh/boards/mach-se/7343/io.c
@@ -6,7 +6,7 @@
  */
 #include <linux/kernel.h>
 #include <asm/io.h>
-#include <asm/mach/se7343.h>
+#include <mach-se/mach/se7343.h>
 
 #define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
 
diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
index 1112e86..5d96e2e 100644
--- a/arch/sh/boards/se/7343/irq.c
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -13,9 +13,9 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se7343.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7343.h>
 
 static void disable_se7343_irq(unsigned int irq)
 {
diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
index 8ae718d..486f40b 100644
--- a/arch/sh/boards/se/7343/setup.c
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -2,7 +2,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <asm/machvec.h>
-#include <asm/mach/se7343.h>
+#include <mach-se/mach/se7343.h>
 #include <asm/heartbeat.h>
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile
index 8e624b0..8e624b0 100644
--- a/arch/sh/boards/se/770x/Makefile
+++ b/arch/sh/boards/mach-se/770x/Makefile
diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c
index b1ec085..28833c8 100644
--- a/arch/sh/boards/se/770x/io.c
+++ b/arch/sh/boards/mach-se/770x/io.c
@@ -6,7 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <asm/io.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 
 /* MS7750 requires special versions of in*, out* routines, since
    PC-like io ports are located at upper half byte of 16-bit word which
diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c
index cdb0807..ec1fea5 100644
--- a/arch/sh/boards/se/770x/irq.c
+++ b/arch/sh/boards/mach-se/770x/irq.c
@@ -13,7 +13,7 @@
 #include <linux/irq.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 
 static struct ipr_data ipr_irq_table[] = {
 	/*
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
index cf4a5ba..9123d96 100644
--- a/arch/sh/boards/se/770x/setup.c
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -9,7 +9,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/machvec.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 #include <asm/io.h>
 #include <asm/smc37c93x.h>
 #include <asm/heartbeat.h>
@@ -113,6 +113,8 @@ static struct platform_device heartbeat_device = {
 	.resource	= heartbeat_resources,
 };
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
 /* SH771X Ethernet driver */
 static struct resource sh_eth0_resources[] = {
 	[0] = {
@@ -159,12 +161,16 @@ static struct platform_device sh_eth1_device = {
 	.num_resources = ARRAY_SIZE(sh_eth1_resources),
 	.resource = sh_eth1_resources,
 };
+#endif
 
 static struct platform_device *se_devices[] __initdata = {
 	&heartbeat_device,
 	&cf_ide_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
 	&sh_eth0_device,
 	&sh_eth1_device,
+#endif
 };
 
 static int __init se_devices_setup(void)
diff --git a/arch/sh/boards/se/7721/Makefile b/arch/sh/boards/mach-se/7721/Makefile
index 7f09030..7f09030 100644
--- a/arch/sh/boards/se/7721/Makefile
+++ b/arch/sh/boards/mach-se/7721/Makefile
diff --git a/arch/sh/boards/se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c
index c4fdd62..b417acc 100644
--- a/arch/sh/boards/se/7721/irq.c
+++ b/arch/sh/boards/mach-se/7721/irq.c
@@ -11,7 +11,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
 
 enum {
 	UNUSED = 0,
diff --git a/arch/sh/boards/se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
index 1be3e92..d3fc80f 100644
--- a/arch/sh/boards/se/7721/setup.c
+++ b/arch/sh/boards/mach-se/7721/setup.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/machvec.h>
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 
diff --git a/arch/sh/boards/se/7722/Makefile b/arch/sh/boards/mach-se/7722/Makefile
index 8694373..8694373 100644
--- a/arch/sh/boards/se/7722/Makefile
+++ b/arch/sh/boards/mach-se/7722/Makefile
diff --git a/arch/sh/boards/se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
index 0b03f3f..02d21a3 100644
--- a/arch/sh/boards/se/7722/irq.c
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
 
 static void disable_se7722_irq(unsigned int irq)
 {
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index 6e228ea..fe6f965 100644
--- a/arch/sh/boards/se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -17,7 +17,7 @@
 #include <linux/smc91x.h>
 #include <asm/machvec.h>
 #include <asm/clock.h>
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_keysc.h>
diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
index dbc29f3..dbc29f3 100644
--- a/arch/sh/boards/se/7751/Makefile
+++ b/arch/sh/boards/mach-se/7751/Makefile
diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c
index e8d846c..6287ae5 100644
--- a/arch/sh/boards/se/7751/io.c
+++ b/arch/sh/boards/mach-se/7751/io.c
@@ -12,7 +12,7 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <asm/io.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
 #include <asm/addrspace.h>
 
 static inline volatile u16 *port2adr(unsigned int port)
diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c
index c3d1259..5c9847e 100644
--- a/arch/sh/boards/se/7751/irq.c
+++ b/arch/sh/boards/mach-se/7751/irq.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/irq.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
 
 static struct ipr_data ipr_irq_table[] = {
 	{ 13, 3, 3, 2 },
diff --git a/arch/sh/boards/se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c
index 203b292..203b292 100644
--- a/arch/sh/boards/se/7751/pci.c
+++ b/arch/sh/boards/mach-se/7751/pci.c
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c
index deefbfd..5057251 100644
--- a/arch/sh/boards/se/7751/setup.c
+++ b/arch/sh/boards/mach-se/7751/setup.c
@@ -11,7 +11,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/machvec.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 
diff --git a/arch/sh/boards/se/7780/Makefile b/arch/sh/boards/mach-se/7780/Makefile
index 6b88ada..6b88ada 100644
--- a/arch/sh/boards/se/7780/Makefile
+++ b/arch/sh/boards/mach-se/7780/Makefile
diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
index 6bd70da..66ad292 100644
--- a/arch/sh/boards/se/7780/irq.c
+++ b/arch/sh/boards/mach-se/7780/irq.c
@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
 
 /*
  * Initialize IRQ setting
diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c
index 0f08ab3..1d3a867 100644
--- a/arch/sh/boards/se/7780/setup.c
+++ b/arch/sh/boards/mach-se/7780/setup.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/machvec.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 
diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile
new file mode 100644
index 0000000..2de42ba
--- /dev/null
+++ b/arch/sh/boards/mach-se/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= board-se7619.o
+
+obj-$(CONFIG_SH_SOLUTION_ENGINE)	+= 770x/
+obj-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= 7206/
+obj-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= 7722/
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= 7751/
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= 7780/
+obj-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= 7343/
+obj-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= 7721/
diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/mach-se/board-se7619.c
index 1d0ef7f..1d0ef7f 100644
--- a/arch/sh/boards/se/7619/setup.c
+++ b/arch/sh/boards/mach-se/board-se7619.c
diff --git a/arch/sh/boards/sh03/Makefile b/arch/sh/boards/mach-sh03/Makefile
index 400306a..400306a 100644
--- a/arch/sh/boards/sh03/Makefile
+++ b/arch/sh/boards/mach-sh03/Makefile
diff --git a/arch/sh/boards/sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c
index 0a9266b..0a9266b 100644
--- a/arch/sh/boards/sh03/rtc.c
+++ b/arch/sh/boards/mach-sh03/rtc.c
diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c
index 934ac4f1..5771219 100644
--- a/arch/sh/boards/sh03/setup.c
+++ b/arch/sh/boards/mach-sh03/setup.c
@@ -11,8 +11,8 @@
 #include <linux/platform_device.h>
 #include <asm/io.h>
 #include <asm/rtc.h>
-#include <asm/sh03/io.h>
-#include <asm/sh03/sh03.h>
+#include <mach-sh03/mach/io.h>
+#include <mach-sh03/mach/sh03.h>
 #include <asm/addrspace.h>
 
 static void __init init_sh03_IRQ(void)
diff --git a/arch/sh/boards/renesas/sh7763rdp/Makefile b/arch/sh/boards/mach-sh7763rdp/Makefile
index f6c0b55..f6c0b55 100644
--- a/arch/sh/boards/renesas/sh7763rdp/Makefile
+++ b/arch/sh/boards/mach-sh7763rdp/Makefile
diff --git a/arch/sh/boards/renesas/sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c
index fd850ba..fd850ba 100644
--- a/arch/sh/boards/renesas/sh7763rdp/irq.c
+++ b/arch/sh/boards/mach-sh7763rdp/irq.c
diff --git a/arch/sh/boards/renesas/sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
index 925f16a..925f16a 100644
--- a/arch/sh/boards/renesas/sh7763rdp/setup.c
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
diff --git a/arch/sh/boards/snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile
index d2d2f4b..d2d2f4b 100644
--- a/arch/sh/boards/snapgear/Makefile
+++ b/arch/sh/boards/mach-snapgear/Makefile
diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c
index 0f48242..0f48242 100644
--- a/arch/sh/boards/snapgear/io.c
+++ b/arch/sh/boards/mach-snapgear/io.c
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c
index 7022483f..a5e349d 100644
--- a/arch/sh/boards/snapgear/setup.c
+++ b/arch/sh/boards/mach-snapgear/setup.c
@@ -22,7 +22,7 @@
 #include <asm/snapgear.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/cpu/timer.h>
+#include <cpu/timer.h>
 
 /*
  * EraseConfig handling functions
diff --git a/arch/sh/boards/renesas/systemh/Makefile b/arch/sh/boards/mach-systemh/Makefile
index 2cc6a23..2cc6a23 100644
--- a/arch/sh/boards/renesas/systemh/Makefile
+++ b/arch/sh/boards/mach-systemh/Makefile
diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/mach-systemh/io.c
index 1b767e1..1b767e1 100644
--- a/arch/sh/boards/renesas/systemh/io.c
+++ b/arch/sh/boards/mach-systemh/io.c
diff --git a/arch/sh/boards/renesas/systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
index 0ba2fe6..0ba2fe6 100644
--- a/arch/sh/boards/renesas/systemh/irq.c
+++ b/arch/sh/boards/mach-systemh/irq.c
diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c
index ee78af8..ee78af8 100644
--- a/arch/sh/boards/renesas/systemh/setup.c
+++ b/arch/sh/boards/mach-systemh/setup.c
diff --git a/arch/sh/boards/titan/Makefile b/arch/sh/boards/mach-titan/Makefile
index 08d7537..08d7537 100644
--- a/arch/sh/boards/titan/Makefile
+++ b/arch/sh/boards/mach-titan/Makefile
diff --git a/arch/sh/boards/titan/io.c b/arch/sh/boards/mach-titan/io.c
index 4730c1d..4730c1d 100644
--- a/arch/sh/boards/titan/io.c
+++ b/arch/sh/boards/mach-titan/io.c
diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/mach-titan/setup.c
index 5de3b2a..5de3b2a 100644
--- a/arch/sh/boards/titan/setup.c
+++ b/arch/sh/boards/mach-titan/setup.c
diff --git a/arch/sh/boards/renesas/x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile
index 983e455..983e455 100644
--- a/arch/sh/boards/renesas/x3proto/Makefile
+++ b/arch/sh/boards/mach-x3proto/Makefile
diff --git a/arch/sh/boards/renesas/x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c
index b5c673c..b5c673c 100644
--- a/arch/sh/boards/renesas/x3proto/ilsel.c
+++ b/arch/sh/boards/mach-x3proto/ilsel.c
diff --git a/arch/sh/boards/renesas/x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index abc5b6d..abc5b6d 100644
--- a/arch/sh/boards/renesas/x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
diff --git a/arch/sh/boards/magicpanelr2/Kconfig b/arch/sh/boards/magicpanelr2/Kconfig
deleted file mode 100644
index b0abddc3..0000000
--- a/arch/sh/boards/magicpanelr2/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-if SH_MAGIC_PANEL_R2
-
-menu "Magic Panel R2 options"
-
-config SH_MAGIC_PANEL_R2_VERSION
-	int SH_MAGIC_PANEL_R2_VERSION
-	default "3"
-	help
-	  Set the version of the Magic Panel R2
-
-endmenu
-
-endif
diff --git a/arch/sh/boards/magicpanelr2/Makefile b/arch/sh/boards/magicpanelr2/Makefile
deleted file mode 100644
index 7a6d586..0000000
--- a/arch/sh/boards/magicpanelr2/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the Magic Panel specific parts
-#
-
-obj-y	 := setup.o
\ No newline at end of file
diff --git a/arch/sh/boards/renesas/ap325rxa/Makefile b/arch/sh/boards/renesas/ap325rxa/Makefile
deleted file mode 100644
index f663768..0000000
--- a/arch/sh/boards/renesas/ap325rxa/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y	:= setup.o
diff --git a/arch/sh/boards/renesas/rsk7203/Makefile b/arch/sh/boards/renesas/rsk7203/Makefile
deleted file mode 100644
index f663768..0000000
--- a/arch/sh/boards/renesas/rsk7203/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y	:= setup.o
diff --git a/arch/sh/boards/renesas/sh7785lcr/Makefile b/arch/sh/boards/renesas/sh7785lcr/Makefile
deleted file mode 100644
index 7703756..0000000
--- a/arch/sh/boards/renesas/sh7785lcr/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y	 := setup.o
diff --git a/arch/sh/boards/se/7619/Makefile b/arch/sh/boards/se/7619/Makefile
deleted file mode 100644
index d21775c..0000000
--- a/arch/sh/boards/se/7619/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the 7619 SolutionEngine specific parts of the kernel
-#
-
-obj-y	 := setup.o
diff --git a/arch/sh/boards/shmin/Makefile b/arch/sh/boards/shmin/Makefile
deleted file mode 100644
index 3190cc7..0000000
--- a/arch/sh/boards/shmin/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the SHMIN board.
-#
-
-obj-y	 := setup.o
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 8b37869..5b54965 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -18,9 +18,10 @@ CONFIG_PAGE_OFFSET	?= 0x80000000
 CONFIG_MEMORY_START	?= 0x0c000000
 CONFIG_BOOT_LINK_OFFSET	?= 0x00800000
 CONFIG_ZERO_PAGE_OFFSET	?= 0x00001000
+CONFIG_ENTRY_OFFSET	?= 0x00001000
 
 export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
-       CONFIG_ZERO_PAGE_OFFSET
+       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET
 
 targets := zImage vmlinux.srec uImage uImage.srec
 subdir- := compressed
diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S
index f72c198..622eac3 100644
--- a/arch/sh/boot/compressed/head_64.S
+++ b/arch/sh/boot/compressed/head_64.S
@@ -14,8 +14,8 @@
  *   Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
  */
 #include <asm/cache.h>
-#include <asm/cpu/mmu_context.h>
-#include <asm/cpu/registers.h>
+#include <cpu/mmu_context.h>
+#include <cpu/registers.h>
 
 /*
  * Fixed TLB entries to identity map the beginning of RAM
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 5471df5..29926a9 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed Jun  4 17:30:00 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:18:59 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -79,9 +80,14 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -99,6 +105,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -175,6 +182,7 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -376,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -466,6 +476,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -512,10 +523,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -587,6 +598,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -620,6 +632,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -631,6 +644,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -667,10 +681,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -679,6 +689,7 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -752,6 +763,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -762,17 +774,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -842,6 +853,7 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -898,6 +910,10 @@ CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -937,6 +953,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 5772878..d407528 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc7
-# Fri Sep 21 15:46:27 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:34:24 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -19,6 +21,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -37,12 +40,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -55,21 +61,38 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -80,6 +103,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -93,13 +117,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -108,6 +136,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 CONFIG_CPU_SUBTYPE_SH7091=y
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -116,14 +145,17 @@ CONFIG_CPU_SUBTYPE_SH7091=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -133,6 +165,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -142,12 +175,15 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -155,6 +191,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -194,6 +232,7 @@ CONFIG_SH_PCLK_FREQ=49876504
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -204,7 +243,10 @@ CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
@@ -239,12 +281,15 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -263,10 +308,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -291,6 +333,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -309,6 +352,7 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -316,8 +360,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -334,10 +376,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -345,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -366,6 +405,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -374,6 +414,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
+CONFIG_GDROM=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -384,11 +425,15 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -400,44 +445,49 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
 
 #
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -449,6 +499,7 @@ CONFIG_8139TOO=y
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -464,12 +515,12 @@ CONFIG_8139TOO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -491,7 +542,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -505,6 +555,8 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_MAPLE is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -530,10 +582,13 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -553,6 +608,19 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -568,45 +636,40 @@ CONFIG_SH_WDT=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
 
 #
-# SPI support
+# Sonics Silicon Backplane
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
@@ -615,11 +678,12 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -653,7 +717,15 @@ CONFIG_FB_PVR2=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -680,49 +752,30 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -735,14 +788,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -771,7 +821,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -786,14 +835,14 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -807,35 +856,25 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -845,14 +884,95 @@ CONFIG_ENABLE_MUST_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 756d38d..41e25b3 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Sep 11 19:42:44 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:24:57 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +22,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -34,12 +37,15 @@ CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_USER_NS is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -52,6 +58,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -64,6 +71,19 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -73,6 +93,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -86,13 +107,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -101,6 +126,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -109,14 +135,17 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -126,6 +155,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0d000000
 CONFIG_MEMORY_SIZE=0x00400000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -135,7 +165,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -143,6 +175,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -181,6 +215,7 @@ CONFIG_SH_PCLK_FREQ=22110000
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -219,11 +254,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -237,10 +275,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 CONFIG_ISA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -263,11 +297,12 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options (EXPERIMENTAL)
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
 
 #
@@ -282,9 +317,12 @@ CONFIG_APM_EMULATION=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
@@ -294,8 +332,11 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -332,6 +373,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
@@ -342,14 +384,17 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_NCR53C406A is not set
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 # CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_QDI is not set
@@ -370,11 +415,9 @@ CONFIG_INPUT_POLLDEV=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
 
 #
 # Input Device Drivers
@@ -387,6 +430,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_HP6XX=y
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -395,12 +439,15 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HP600=y
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -417,9 +464,11 @@ CONFIG_SERIO=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -439,7 +488,6 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -454,39 +502,45 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_HP680=y
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
@@ -495,11 +549,12 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -511,7 +566,20 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_HIT=y
+CONFIG_FB_SH_MOBILE_LCDC=y
 # CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_HP680=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -533,15 +601,13 @@ CONFIG_FONT_PEARL_8x8=y
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -564,9 +630,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -575,23 +642,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -606,13 +657,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -643,7 +691,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -658,8 +705,11 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 
@@ -668,10 +718,6 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -714,22 +760,21 @@ CONFIG_NLS_CODEPAGE_850=y
 # CONFIG_NLS_UTF8 is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -739,50 +784,95 @@ CONFIG_ENABLE_MUST_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index 38f934a..99cc39c 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,44 +1,53 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Thu Dec  7 17:13:04 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:35:07 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -50,34 +59,48 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -91,67 +114,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-CONFIG_SH_LANDISK=y
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -160,53 +142,60 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -214,19 +203,32 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+CONFIG_SH_LANDISK=y
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_LBOX_RE2 is not set
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -241,12 +243,11 @@ CONFIG_SH_PCLK_FREQ=33333333
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
-CONFIG_HEARTBEAT=y
 
 #
 # Additional SuperH Device Drivers
 #
+CONFIG_HEARTBEAT=y
 # CONFIG_PUSH_SWITCH is not set
 
 #
@@ -254,13 +255,17 @@ CONFIG_HEARTBEAT=y
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -273,16 +278,12 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
-CONFIG_ISA=y
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -301,29 +302,16 @@ CONFIG_YENTA_ENE_TUNE=y
 CONFIG_YENTA_TOSHIBA=y
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
 CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -331,13 +319,14 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -364,49 +353,36 @@ CONFIG_IP_PNP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_QUEUE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -421,10 +397,6 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -432,9 +404,20 @@ CONFIG_ATALK=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -443,35 +426,17 @@ CONFIG_ATALK=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -484,63 +449,66 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
 CONFIG_BLK_DEV_OFFBOARD=y
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-CONFIG_IDEDMA_ONLYDISK=y
 CONFIG_BLK_DEV_AEC62XX=y
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -550,18 +518,15 @@ CONFIG_BLK_DEV_AEC62XX=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -583,6 +548,7 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -590,77 +556,43 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -671,76 +603,49 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -748,18 +653,20 @@ CONFIG_NET_PCI=y
 # CONFIG_NE2K_PCI is not set
 CONFIG_8139CP=y
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -767,58 +674,53 @@ CONFIG_8139CP=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# PCMCIA network device support
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+# CONFIG_USB_USBNET is not set
 # CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -826,6 +728,7 @@ CONFIG_8139CP=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -835,7 +738,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -845,6 +747,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -858,10 +761,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -880,22 +786,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -903,65 +797,77 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
 
 #
-# Video Capture Adapters
+# Multimedia core support
 #
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
 
 #
-# Video Capture Adapters
+# Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_PMS is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_STRADIS is not set
-
-#
-# V4L USB devices
-#
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_GSPCA is not set
 CONFIG_VIDEO_USBVIDEO=m
 CONFIG_USB_VICAM=m
 CONFIG_USB_IBMCAM=m
@@ -975,106 +881,100 @@ CONFIG_USB_STV680=m
 # CONFIG_USB_ZC0301 is not set
 CONFIG_USB_PWC=m
 # CONFIG_USB_PWC_DEBUG is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
 # CONFIG_RADIO_GEMTEK_PCI is not set
 # CONFIG_RADIO_MAXIRADIO is not set
 # CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
 CONFIG_USB_DSBR=m
+# CONFIG_USB_SI470X is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
-CONFIG_USB_DABUSB=m
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
-# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FONT_8x16=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# Open Sound System
+# USB Input Devices
 #
-CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE_DRIVER is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1094,66 +994,28 @@ CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 # CONFIG_USB_SERIAL_CP2101 is not set
@@ -1168,6 +1030,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KLSI is not set
@@ -1175,8 +1038,11 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -1197,6 +1063,7 @@ CONFIG_USB_EMI26=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1208,61 +1075,18 @@ CONFIG_USB_SISUSBVGA=m
 CONFIG_USB_SISUSBVGA_CON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1276,7 +1100,6 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
 # CONFIG_REISERFS_CHECK is not set
@@ -1285,14 +1108,11 @@ CONFIG_REISERFS_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1328,7 +1148,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1343,26 +1162,24 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1376,17 +1193,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1427,46 +1239,128 @@ CONFIG_NLS_CODEPAGE_932=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index b68b6cd..aecdfd3 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Sat Mar 24 22:04:27 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:39:41 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -11,37 +13,40 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -54,34 +59,48 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -95,66 +114,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-CONFIG_SH_LBOX_RE2=y
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -163,55 +142,60 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -219,12 +203,21 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+CONFIG_SH_LBOX_RE2=y
 
 #
 # Timer and clock configuration
@@ -232,6 +225,10 @@ CONFIG_CPU_HAS_PTEA=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=40000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -246,7 +243,6 @@ CONFIG_SH_PCLK_FREQ=40000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -262,11 +258,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -280,15 +279,12 @@ CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
 #
 # Bus options
 #
-CONFIG_ISA=y
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
 CONFIG_PCMCIA_DEBUG=y
 CONFIG_PCMCIA=y
@@ -306,29 +302,16 @@ CONFIG_YENTA_O2=y
 # CONFIG_YENTA_TOSHIBA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
 CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -336,7 +319,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +326,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -370,29 +353,26 @@ CONFIG_IP_PNP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
@@ -401,20 +381,8 @@ CONFIG_NETFILTER=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -427,10 +395,6 @@ CONFIG_NETFILTER=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -438,9 +402,20 @@ CONFIG_NETFILTER=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -449,36 +424,17 @@ CONFIG_NETFILTER=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -490,19 +446,18 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -510,6 +465,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -531,6 +487,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -538,71 +495,49 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -612,7 +547,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -622,6 +556,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
 # CONFIG_PATA_CS5530 is not set
@@ -635,18 +570,18 @@ CONFIG_ATA=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_QDI is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
@@ -656,88 +591,52 @@ CONFIG_ATA=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
 CONFIG_PATA_PLATFORM=y
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -749,19 +648,20 @@ CONFIG_8139TOO_PIO=y
 CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -769,36 +669,33 @@ CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
 # CONFIG_PCMCIA_3C574 is not set
@@ -808,29 +705,16 @@ CONFIG_PCMCIA_PCNET=y
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -838,6 +722,7 @@ CONFIG_PCMCIA_PCNET=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -847,7 +732,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -857,6 +741,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -870,10 +755,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -892,22 +780,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -915,125 +791,104 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Console display driver support
+# Display device support
 #
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Sound
+# Console display driver support
 #
+CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1047,37 +902,29 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_SH is not set
 # CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
 
 #
-# DMA Devices
+# SPI RTC drivers
 #
 
 #
-# Auxiliary Display support
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Virtualization
+# on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1091,20 +938,16 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1136,7 +979,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1151,14 +993,14 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -1166,17 +1008,12 @@ CONFIG_RAMFS=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1217,30 +1054,24 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
@@ -1251,20 +1082,100 @@ CONFIG_SH_STANDARD_BIOS=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index f8398a5..a3a80f3 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Fri Aug 17 12:15:16 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:41:08 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -18,6 +20,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -35,12 +38,16 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -48,6 +55,7 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -55,6 +63,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -67,10 +76,24 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -81,6 +104,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -94,13 +118,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -109,6 +137,7 @@ CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 CONFIG_CPU_SUBTYPE_SH7720=y
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -117,14 +146,17 @@ CONFIG_CPU_SUBTYPE_SH7720=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -134,6 +166,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0C000000
 CONFIG_MEMORY_SIZE=0x03F00000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -143,7 +176,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -151,6 +186,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -173,7 +210,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SH_DSP=y
 CONFIG_SH_ADC=y
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_DSP=y
 
@@ -196,6 +232,7 @@ CONFIG_SH_PCLK_FREQ=24000000
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -228,11 +265,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -245,10 +285,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 # Bus options
 #
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -289,6 +325,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -296,8 +333,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -314,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -325,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -346,9 +378,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -362,6 +397,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -374,6 +410,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -408,7 +445,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x0000000
 CONFIG_MTD_PHYSMAP_LEN=0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_SOLUTIONENGINE is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -440,11 +476,14 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -457,18 +496,24 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
 CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -477,10 +522,10 @@ CONFIG_SMC911X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -502,7 +547,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -516,6 +560,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -539,9 +584,11 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -569,60 +616,72 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
@@ -644,9 +703,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -655,23 +715,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -684,18 +728,14 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -724,7 +764,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -744,30 +783,29 @@ CONFIG_JFFS2_FS_DEBUG=0
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-CONFIG_SUNRPC_BIND34=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -781,10 +819,6 @@ CONFIG_SUNRPC_BIND34=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
@@ -825,23 +859,16 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -852,6 +879,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -866,11 +894,16 @@ CONFIG_DEBUG_KOBJECT=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
@@ -879,6 +912,7 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 CONFIG_SH_KGDB=y
 
 #
@@ -904,14 +938,17 @@ CONFIG_KGDB_DEFBITS_8=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index e89d951..e4b900e 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,28 +1,35 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 11:27:01 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:47:16 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
@@ -31,10 +38,16 @@ CONFIG_SWAP=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -47,29 +60,42 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 # CONFIG_MODULES is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -83,59 +109,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-CONFIG_SH_SH4202_MICRODEV=y
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -144,67 +137,94 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 CONFIG_CPU_SUBTYPE_SH4_202=y
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_SH_WRITETHROUGH=y
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+CONFIG_SH_SH4202_MICRODEV=y
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=66000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -214,6 +234,7 @@ CONFIG_SH_PCLK_FREQ=66000000
 #
 # DMA support
 #
+CONFIG_SH_DMA_API=y
 CONFIG_SH_DMA=y
 CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 # CONFIG_NR_DMA_CHANNELS_BOOL is not set
@@ -221,22 +242,30 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -251,30 +280,16 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
 # Bus options
 #
 CONFIG_SUPERHYWAY=y
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -282,12 +297,13 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -308,30 +324,19 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -344,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -355,9 +356,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -366,159 +378,96 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=1
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -536,6 +485,7 @@ CONFIG_SMC91X=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -554,143 +504,93 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -702,20 +602,18 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -747,7 +645,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -762,21 +659,20 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -789,17 +685,12 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -840,76 +731,127 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 287408b..c4b3e1d 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Thu May 22 14:30:07 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:44:41 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -77,9 +78,14 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -90,12 +96,13 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -173,7 +180,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -216,6 +225,8 @@ CONFIG_CPU_HAS_DSP=y
 #
 # CONFIG_SH_7722_SOLUTION_ENGINE is not set
 CONFIG_SH_MIGOR=y
+CONFIG_SH_MIGOR_QVGA=y
+# CONFIG_SH_MIGOR_RTA_WVGA is not set
 
 #
 # Timer and clock configuration
@@ -362,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -378,6 +390,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -475,6 +489,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -521,10 +536,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -537,6 +552,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -602,6 +618,7 @@ CONFIG_KEYBOARD_SH_KEYSC=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -636,21 +653,35 @@ CONFIG_I2C_BOARDINFO=y
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -663,6 +694,7 @@ CONFIG_I2C_SH_MOBILE=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -674,6 +706,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -710,10 +743,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -738,7 +767,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 CONFIG_SUPERH_BUILT_IN_M66592=y
@@ -757,6 +786,7 @@ CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_G_SERIAL=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -790,6 +820,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -810,6 +841,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -870,6 +902,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -899,6 +932,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -955,6 +989,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -994,6 +1032,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 1a07261..57a3007 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc4
-# Thu Mar  6 15:39:59 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:51:13 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -84,13 +85,20 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -101,6 +109,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -115,7 +124,6 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -126,6 +134,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -143,6 +152,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -173,7 +183,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -188,6 +200,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -268,7 +281,7 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_RCU_TRACE=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -348,14 +361,13 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -384,6 +396,7 @@ CONFIG_LLC=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -400,6 +413,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -420,12 +435,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -499,9 +516,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -511,7 +532,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -556,17 +576,21 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -585,6 +609,7 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -593,7 +618,6 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
-# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
@@ -616,32 +640,28 @@ CONFIG_8139TOO_8129=y
 # CONFIG_TLAN is not set
 CONFIG_VIA_RHINE=m
 CONFIG_VIA_RHINE_MMIO=y
-# CONFIG_VIA_RHINE_NAPI is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -654,6 +674,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -661,6 +682,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -701,6 +723,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -722,6 +745,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -750,12 +774,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -776,6 +795,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -787,13 +807,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -809,24 +840,9 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -836,6 +852,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -844,6 +862,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -879,10 +898,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -903,7 +919,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -957,6 +972,7 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -967,20 +983,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1043,6 +1056,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1050,9 +1064,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1066,6 +1083,8 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
@@ -1091,51 +1110,84 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1144,8 +1196,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 0dc1ce7..1d09d24 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Fri Nov 23 14:03:57 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 00:59:19 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -21,6 +22,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -39,18 +42,16 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -64,20 +65,37 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -88,6 +106,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -101,6 +120,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
@@ -109,7 +129,10 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -118,6 +141,7 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -126,12 +150,15 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 CONFIG_CPU_SUBTYPE_SH7785=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -157,7 +184,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_HUGETLB_PAGE_SIZE_64K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 CONFIG_HUGETLB_PAGE_SIZE_1MB=y
@@ -173,6 +202,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 # CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -202,6 +232,7 @@ CONFIG_CPU_HAS_FPU=y
 # Board support
 #
 CONFIG_SH_HIGHLANDER=y
+# CONFIG_SH_SH7785LCR is not set
 # CONFIG_SH_R7780RP is not set
 # CONFIG_SH_R7780MP is not set
 CONFIG_SH_R7785RP=y
@@ -245,12 +276,13 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -295,6 +327,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -329,14 +362,13 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -355,6 +387,7 @@ CONFIG_LLC=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -364,6 +397,7 @@ CONFIG_LLC=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -380,6 +414,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -397,14 +433,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -464,6 +504,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -476,9 +517,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -488,7 +533,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -517,6 +561,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -532,24 +577,27 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -576,20 +624,21 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -601,6 +650,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -608,13 +659,13 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -649,6 +700,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -670,7 +722,9 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -697,12 +751,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -722,6 +771,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -733,13 +784,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -751,15 +813,15 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -792,6 +854,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
@@ -800,24 +864,9 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -827,17 +876,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -861,9 +910,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -872,10 +922,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -896,14 +943,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -951,8 +995,11 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -960,20 +1007,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1028,10 +1072,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1040,6 +1080,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1050,6 +1091,7 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_SPINLOCK=y
@@ -1066,12 +1108,14 @@ CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
@@ -1091,54 +1135,96 @@ CONFIG_4KSTACKS=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index a0ebd43..840fe38 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Tue Jun  3 13:02:42 2008
+# Linux kernel version: 2.6.26
+# Mon Jul 28 22:23:03 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -33,21 +33,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -72,26 +73,36 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
+# CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
+CONFIG_SLOB=y
 CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -162,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -196,6 +209,7 @@ CONFIG_CPU_HAS_FPU=y
 #
 # Board support
 #
+CONFIG_SH_RSK7203=y
 
 #
 # Timer and clock configuration
@@ -274,6 +288,7 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
 #
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
@@ -424,8 +439,8 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -456,9 +471,11 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -475,7 +492,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -487,15 +503,15 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
-CONFIG_SMC91X=y
+# CONFIG_SMC91X is not set
+CONFIG_SMC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -503,6 +519,15 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -587,6 +612,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -605,6 +631,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multimedia drivers
 #
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -618,26 +645,96 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -677,6 +774,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -734,6 +832,7 @@ CONFIG_SYSFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
@@ -743,12 +842,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -775,16 +873,20 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+# CONFIG_DEBUG_OBJECTS_FREE is not set
+# CONFIG_DEBUG_OBJECTS_TIMERS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -797,12 +899,14 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_WRITECOUNT=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -830,6 +934,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index 3a915fd..8413236 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb  7 16:25:55 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:55:52 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -76,22 +77,31 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -170,6 +184,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -256,7 +271,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
@@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -490,7 +514,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -535,17 +558,21 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -564,6 +591,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -690,9 +719,11 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -765,6 +792,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -862,15 +904,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# SPI devices
-#
-
-#
-# SUPERH devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index 0a6d3b9..7d9fa6e 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb  7 16:17:47 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:59:18 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -76,22 +77,31 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -170,6 +184,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -256,7 +271,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
@@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -490,7 +514,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -535,17 +558,21 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -564,6 +591,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -690,9 +719,11 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -765,6 +792,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -862,15 +904,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# SPI devices
-#
-
-#
-# SUPERH devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index bb9bcd6..6d834f2 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan 22 11:34:03 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:00:12 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -38,24 +40,23 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -63,11 +64,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -75,11 +78,24 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
@@ -90,6 +106,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -103,6 +120,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
@@ -113,6 +131,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -130,6 +149,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -137,6 +157,7 @@ CONFIG_CPU_SUBTYPE_SH7780=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -159,7 +180,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -174,6 +197,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
@@ -205,7 +229,6 @@ CONFIG_CPU_HAS_FPU=y
 # CONFIG_SH_7780_SOLUTION_ENGINE is not set
 CONFIG_SH_SDK7780=y
 # CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_SDK7780_STANDALONE is not set
 CONFIG_SH_SDK7780_BASE=y
 
 #
@@ -250,12 +273,13 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -321,6 +345,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -370,8 +395,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 # CONFIG_INET6_XFRM_MODE_BEET is not set
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -397,7 +424,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -405,7 +431,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_INGRESS is not set
 
 #
 # Classification
@@ -417,9 +442,9 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_CLS_U32 is not set
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_POLICE is not set
 CONFIG_NET_SCH_FIFO=y
 
 #
@@ -427,6 +452,7 @@ CONFIG_NET_SCH_FIFO=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -452,6 +478,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -475,16 +503,18 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -492,6 +522,7 @@ CONFIG_IDEDISK_MULTI_MODE=y
 # CONFIG_BLK_DEV_IDECS is not set
 # CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -501,14 +532,12 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 CONFIG_BLK_DEV_PLATFORM=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -518,10 +547,8 @@ CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -537,10 +564,7 @@ CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -600,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -613,9 +638,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -625,7 +654,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -654,6 +682,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -670,6 +699,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 # CONFIG_BLK_DEV_MD is not set
 CONFIG_BLK_DEV_DM=y
@@ -686,11 +716,14 @@ CONFIG_BLK_DEV_DM=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -708,6 +741,7 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -726,6 +760,7 @@ CONFIG_SMC91X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -743,7 +778,6 @@ CONFIG_SMC91X=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
 # CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
@@ -780,6 +814,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -812,10 +847,13 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -847,22 +885,20 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -870,8 +906,10 @@ CONFIG_POWER_SUPPLY=y
 #
 CONFIG_SSB_POSSIBLE=y
 CONFIG_SSB=y
+CONFIG_SSB_SPROM=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
 CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
 CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 # CONFIG_SSB_PCMCIAHOST is not set
 # CONFIG_SSB_SILENT is not set
@@ -882,13 +920,24 @@ CONFIG_SSB_DRIVER_PCICORE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -900,15 +949,15 @@ CONFIG_SSB_DRIVER_PCICORE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -941,6 +990,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
@@ -970,24 +1021,9 @@ CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_SUPERH_MONO=y
 CONFIG_LOGO_SUPERH_VGA16=y
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -1006,6 +1042,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1014,15 +1051,18 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -1033,6 +1073,7 @@ CONFIG_USB_EHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1054,6 +1095,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1067,10 +1109,6 @@ CONFIG_USB_MON=y
 # USB port drivers
 #
 # CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1096,16 +1134,10 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1117,13 +1149,11 @@ CONFIG_LEDS_CLASS=y
 # LED Triggers
 #
 # CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1145,14 +1175,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1203,8 +1230,11 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1212,19 +1242,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1279,7 +1306,6 @@ CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1288,6 +1314,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
 # CONFIG_DEBUG_FS is not set
@@ -1295,10 +1322,14 @@ CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1313,12 +1344,14 @@ CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
@@ -1338,52 +1371,94 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 6b34baa..af15cbe 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Tue Jun  3 20:27:08 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:06:07 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -87,9 +88,14 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -99,12 +105,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -175,7 +182,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -294,6 +303,7 @@ CONFIG_CF_BASE_ADDR=0xb8000000
 #
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
@@ -487,6 +497,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_93CX6=y
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -503,7 +514,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -516,6 +526,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -583,6 +594,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -594,6 +606,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -625,10 +638,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -669,6 +678,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -728,6 +738,7 @@ CONFIG_CONFIGFS_FS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
@@ -738,13 +749,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -776,6 +786,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -795,6 +807,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_VM=y
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -860,6 +873,10 @@ CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -899,6 +916,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 CONFIG_CRC7=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 7b72736..4e30b70 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Mon Jul  7 13:12:45 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:08:38 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -77,9 +78,14 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
@@ -90,12 +96,13 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -171,6 +178,7 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -368,6 +376,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -455,6 +465,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -497,10 +508,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -513,13 +524,13 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -572,6 +583,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -617,6 +629,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -646,6 +659,7 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 CONFIG_RADIO_ADAPTERS=y
 # CONFIG_DAB is not set
 
@@ -657,9 +671,9 @@ CONFIG_RADIO_ADAPTERS=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -676,6 +690,7 @@ CONFIG_FIRMWARE_EDID=y
 # Frame buffer hardware drivers
 #
 # CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
@@ -690,15 +705,7 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -714,40 +721,14 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# SUPERH devices
-#
-
-#
-# System on Chip audio support
-#
+CONFIG_SND_SUPERH=y
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -759,6 +740,7 @@ CONFIG_HID=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -836,6 +818,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -854,7 +837,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -885,6 +867,7 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -941,6 +924,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -980,6 +967,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index 3a3c3c1..80c1c72 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Fri Jun 15 19:43:06 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:12:32 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -17,27 +19,26 @@ CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -49,6 +50,7 @@ CONFIG_EMBEDDED=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
@@ -60,20 +62,26 @@ CONFIG_EVENTFD=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
 # CONFIG_MODULES is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -87,14 +95,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SUBTYPE_SH7619=y
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -102,6 +113,8 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -110,14 +123,17 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -126,6 +142,7 @@ CONFIG_QUICKLIST=y
 CONFIG_PAGE_OFFSET=0x00000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
@@ -134,7 +151,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -142,6 +161,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -151,7 +172,9 @@ CONFIG_NR_QUICK=2
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_SH_WRITETHROUGH=y
+# CONFIG_CACHE_WRITEBACK is not set
+CONFIG_CACHE_WRITETHROUGH=y
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -159,8 +182,6 @@ CONFIG_SH_WRITETHROUGH=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_SH_FPU_EMU is not set
-# CONFIG_SH_DSP is not set
-CONFIG_CPU_HAS_IPR_IRQ=y
 
 #
 # Board support
@@ -185,7 +206,6 @@ CONFIG_SH_CLK_MD=5
 #
 # DMA support
 #
-# CONFIG_SH_DMA is not set
 
 #
 # Companion Chips
@@ -205,11 +225,13 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
 
 #
 # Boot options
@@ -221,15 +243,13 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
+# CONFIG_CF_ENABLER is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
@@ -250,10 +270,6 @@ CONFIG_BINFMT_ZFLAT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
@@ -263,6 +279,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -275,6 +292,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -334,29 +352,17 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -364,21 +370,10 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -386,13 +381,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -416,6 +411,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -433,123 +429,84 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_DAB=y
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -561,12 +518,9 @@ CONFIG_HID=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -592,7 +546,6 @@ CONFIG_PROC_SYSCTL=y
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 
 #
 # Miscellaneous filesystems
@@ -607,8 +560,11 @@ CONFIG_RAMFS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 
@@ -617,28 +573,23 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 
@@ -646,20 +597,20 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # Security options
 #
 # CONFIG_KEYS is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
index 0caf11b..af7bb58 100644
--- a/arch/sh/drivers/dma/dma-g2.c
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -14,8 +14,8 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <asm/cacheflush.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/dma.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
 #include <asm/dma.h>
 
 struct g2_channel {
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 838fad5..391cbe1 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -13,8 +13,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/dma.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 71ff3d6..b2ffe64 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
-#include <asm/dreamcast/dma.h>
+#include <mach-dreamcast/mach/dma.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 #include "dma-sh.h"
diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h
index 0f591fb..b05af34 100644
--- a/arch/sh/drivers/dma/dma-sh.h
+++ b/arch/sh/drivers/dma/dma-sh.h
@@ -11,7 +11,7 @@
 #ifndef __DMA_SH_H
 #define __DMA_SH_H
 
-#include <asm/cpu/dma.h>
+#include <cpu/dma.h>
 
 /* Definitions for the SuperH DMAC */
 #define REQ_L	0x00000000
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index c446993..2bf85cf 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -26,7 +26,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/mach/pci.h>
+#include <mach/pci.h>
 
 static void __init gapspci_fixup_resources(struct pci_dev *dev)
 {
diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c
index 980275f..5ccf9ea 100644
--- a/arch/sh/drivers/pci/ops-cayman.c
+++ b/arch/sh/drivers/pci/ops-cayman.c
@@ -2,7 +2,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/types.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include "pci-sh5.h"
 
 static inline u8 bridge_swizzle(u8 pin, u8 slot)
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index f54c291..f5d2a2a 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -26,7 +26,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/mach/pci.h>
+#include <mach/pci.h>
 
 static struct resource gapspci_io_resource = {
 	.name	= "GAPSPCI IO",
diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c
index bbdb48c1..3145c62 100644
--- a/arch/sh/drivers/pci/ops-se7780.c
+++ b/arch/sh/drivers/pci/ops-se7780.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
 #include <asm/io.h>
 #include "pci-sh4.h"
 
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index a00a4df..7a97438 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -19,7 +19,7 @@
 #include <linux/delay.h>
 #include <linux/types.h>
 #include <linux/irq.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include <asm/pci.h>
 #include <asm/io.h>
 #include "pci-sh5.h"
diff --git a/include/asm-sh/.gitignore b/arch/sh/include/asm/.gitignore
index 9218ef8..378db77 100644
--- a/include/asm-sh/.gitignore
+++ b/arch/sh/include/asm/.gitignore
@@ -1,3 +1 @@
-cpu
-mach
 machtypes.h
diff --git a/include/asm-sh/Kbuild b/arch/sh/include/asm/Kbuild
index 43910cd..43910cd 100644
--- a/include/asm-sh/Kbuild
+++ b/arch/sh/include/asm/Kbuild
diff --git a/include/asm-sh/a.out.h b/arch/sh/include/asm/a.out.h
index 1f93130..1f93130 100644
--- a/include/asm-sh/a.out.h
+++ b/arch/sh/include/asm/a.out.h
diff --git a/include/asm-sh/adc.h b/arch/sh/include/asm/adc.h
index 5f85cf7..48824c1 100644
--- a/include/asm-sh/adc.h
+++ b/arch/sh/include/asm/adc.h
@@ -5,7 +5,7 @@
  * Copyright (C) 2004  Andriy Skulysh
  */
 
-#include <asm/cpu/adc.h>
+#include <cpu/adc.h>
 
 int adc_single(unsigned int channel);
 
diff --git a/include/asm-sh/addrspace.h b/arch/sh/include/asm/addrspace.h
index fa544fc..2702d81 100644
--- a/include/asm-sh/addrspace.h
+++ b/arch/sh/include/asm/addrspace.h
@@ -12,7 +12,7 @@
 
 #ifdef __KERNEL__
 
-#include <asm/cpu/addrspace.h>
+#include <cpu/addrspace.h>
 
 /* If this CPU supports segmentation, hook up the helpers */
 #ifdef P1SEG
diff --git a/include/asm-sh/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h
index 4c5b7db..4c5b7db 100644
--- a/include/asm-sh/atomic-grb.h
+++ b/arch/sh/include/asm/atomic-grb.h
diff --git a/include/asm-sh/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h
index 74f7943..74f7943 100644
--- a/include/asm-sh/atomic-irq.h
+++ b/arch/sh/include/asm/atomic-irq.h
diff --git a/include/asm-sh/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h
index 4b00b78..4b00b78 100644
--- a/include/asm-sh/atomic-llsc.h
+++ b/arch/sh/include/asm/atomic-llsc.h
diff --git a/include/asm-sh/atomic.h b/arch/sh/include/asm/atomic.h
index c043ef0..c043ef0 100644
--- a/include/asm-sh/atomic.h
+++ b/arch/sh/include/asm/atomic.h
diff --git a/include/asm-sh/auxvec.h b/arch/sh/include/asm/auxvec.h
index a6b9d4f..483effd 100644
--- a/include/asm-sh/auxvec.h
+++ b/arch/sh/include/asm/auxvec.h
@@ -12,7 +12,7 @@
  */
 #define AT_FPUCW		18	/* Used FPU control word.  */
 
-#ifdef CONFIG_VSYSCALL
+#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__)
 /*
  * Only define this in the vsyscall case, the entry point to
  * the vsyscall page gets placed here. The kernel will attempt
diff --git a/include/asm-sh/bitops-grb.h b/arch/sh/include/asm/bitops-grb.h
index a5907b9..a5907b9 100644
--- a/include/asm-sh/bitops-grb.h
+++ b/arch/sh/include/asm/bitops-grb.h
diff --git a/include/asm-sh/bitops-irq.h b/arch/sh/include/asm/bitops-irq.h
index 653a127..653a127 100644
--- a/include/asm-sh/bitops-irq.h
+++ b/arch/sh/include/asm/bitops-irq.h
diff --git a/include/asm-sh/bitops.h b/arch/sh/include/asm/bitops.h
index d7d382f..d7d382f 100644
--- a/include/asm-sh/bitops.h
+++ b/arch/sh/include/asm/bitops.h
diff --git a/include/asm-sh/bug.h b/arch/sh/include/asm/bug.h
index c017180..c017180 100644
--- a/include/asm-sh/bug.h
+++ b/arch/sh/include/asm/bug.h
diff --git a/include/asm-sh/bugs.h b/arch/sh/include/asm/bugs.h
index 121b2ec..121b2ec 100644
--- a/include/asm-sh/bugs.h
+++ b/arch/sh/include/asm/bugs.h
diff --git a/include/asm-sh/byteorder.h b/arch/sh/include/asm/byteorder.h
index 4c13e61..4c13e61 100644
--- a/include/asm-sh/byteorder.h
+++ b/arch/sh/include/asm/byteorder.h
diff --git a/include/asm-sh/cache.h b/arch/sh/include/asm/cache.h
index 083419f4..02df18e 100644
--- a/include/asm-sh/cache.h
+++ b/arch/sh/include/asm/cache.h
@@ -10,7 +10,7 @@
 #ifdef __KERNEL__
 
 #include <linux/init.h>
-#include <asm/cpu/cache.h>
+#include <cpu/cache.h>
 
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
diff --git a/include/asm-sh/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index e034c36..09acbc3 100644
--- a/include/asm-sh/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -27,7 +27,7 @@
 #define __flush_purge_region(start, size)	do { (void)(start); } while (0)
 #define __flush_invalidate_region(start, size)	do { (void)(start); } while (0)
 #else
-#include <asm/cpu/cacheflush.h>
+#include <cpu/cacheflush.h>
 
 /*
  * Consistent DMA requires that the __flush_xxx() primitives must be set
diff --git a/include/asm-sh/checksum.h b/arch/sh/include/asm/checksum.h
index 67496ab..67496ab 100644
--- a/include/asm-sh/checksum.h
+++ b/arch/sh/include/asm/checksum.h
diff --git a/include/asm-sh/checksum_32.h b/arch/sh/include/asm/checksum_32.h
index 14b7ac2..14b7ac2 100644
--- a/include/asm-sh/checksum_32.h
+++ b/arch/sh/include/asm/checksum_32.h
diff --git a/include/asm-sh/checksum_64.h b/arch/sh/include/asm/checksum_64.h
index 9c62a03..9c62a03 100644
--- a/include/asm-sh/checksum_64.h
+++ b/arch/sh/include/asm/checksum_64.h
diff --git a/include/asm-sh/clock.h b/arch/sh/include/asm/clock.h
index 720dfab..720dfab 100644
--- a/include/asm-sh/clock.h
+++ b/arch/sh/include/asm/clock.h
diff --git a/include/asm-sh/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h
index e2681ab..e2681ab 100644
--- a/include/asm-sh/cmpxchg-grb.h
+++ b/arch/sh/include/asm/cmpxchg-grb.h
diff --git a/include/asm-sh/cmpxchg-irq.h b/arch/sh/include/asm/cmpxchg-irq.h
index 43049ec..43049ec 100644
--- a/include/asm-sh/cmpxchg-irq.h
+++ b/arch/sh/include/asm/cmpxchg-irq.h
diff --git a/include/asm-sh/cpu-features.h b/arch/sh/include/asm/cpu-features.h
index 86308aa..86308aa 100644
--- a/include/asm-sh/cpu-features.h
+++ b/arch/sh/include/asm/cpu-features.h
diff --git a/include/asm-sh/cputime.h b/arch/sh/include/asm/cputime.h
index 6ca395d..6ca395d 100644
--- a/include/asm-sh/cputime.h
+++ b/arch/sh/include/asm/cputime.h
diff --git a/include/asm-sh/current.h b/arch/sh/include/asm/current.h
index 62b6388..62b6388 100644
--- a/include/asm-sh/current.h
+++ b/arch/sh/include/asm/current.h
diff --git a/include/asm-sh/delay.h b/arch/sh/include/asm/delay.h
index 4b16bf9..4b16bf9 100644
--- a/include/asm-sh/delay.h
+++ b/arch/sh/include/asm/delay.h
diff --git a/include/asm-sh/device.h b/arch/sh/include/asm/device.h
index efd511d..efd511d 100644
--- a/include/asm-sh/device.h
+++ b/arch/sh/include/asm/device.h
diff --git a/include/asm-sh/div64.h b/arch/sh/include/asm/div64.h
index 6cd978c..6cd978c 100644
--- a/include/asm-sh/div64.h
+++ b/arch/sh/include/asm/div64.h
diff --git a/include/asm-sh/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
index 627315e..627315e 100644
--- a/include/asm-sh/dma-mapping.h
+++ b/arch/sh/include/asm/dma-mapping.h
diff --git a/include/asm-sh/dma.h b/arch/sh/include/asm/dma.h
index a65b02f..beca712 100644
--- a/include/asm-sh/dma.h
+++ b/arch/sh/include/asm/dma.h
@@ -15,7 +15,7 @@
 #include <linux/wait.h>
 #include <linux/sched.h>
 #include <linux/sysdev.h>
-#include <asm/cpu/dma.h>
+#include <cpu/dma.h>
 
 /* The maximum address that we can perform a DMA transfer to on this platform */
 /* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any
diff --git a/include/asm-sh/dmabrg.h b/arch/sh/include/asm/dmabrg.h
index c5edba2..c5edba2 100644
--- a/include/asm-sh/dmabrg.h
+++ b/arch/sh/include/asm/dmabrg.h
diff --git a/include/asm-sh/edosk7705.h b/arch/sh/include/asm/edosk7705.h
index 5bdc9d9..5bdc9d9 100644
--- a/include/asm-sh/edosk7705.h
+++ b/arch/sh/include/asm/edosk7705.h
diff --git a/include/asm-sh/elf.h b/arch/sh/include/asm/elf.h
index f01449a..f01449a 100644
--- a/include/asm-sh/elf.h
+++ b/arch/sh/include/asm/elf.h
diff --git a/include/asm-sh/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h
index 108d8c4..108d8c4 100644
--- a/include/asm-sh/emergency-restart.h
+++ b/arch/sh/include/asm/emergency-restart.h
diff --git a/include/asm-sh/entry-macros.S b/arch/sh/include/asm/entry-macros.S
index 2dab0b8..2dab0b8 100644
--- a/include/asm-sh/entry-macros.S
+++ b/arch/sh/include/asm/entry-macros.S
diff --git a/include/asm-sh/errno.h b/arch/sh/include/asm/errno.h
index 51cf6f9..51cf6f9 100644
--- a/include/asm-sh/errno.h
+++ b/arch/sh/include/asm/errno.h
diff --git a/include/asm-sh/fb.h b/arch/sh/include/asm/fb.h
index d92e99c..d92e99c 100644
--- a/include/asm-sh/fb.h
+++ b/arch/sh/include/asm/fb.h
diff --git a/include/asm-sh/fcntl.h b/arch/sh/include/asm/fcntl.h
index 46ab12d..46ab12d 100644
--- a/include/asm-sh/fcntl.h
+++ b/arch/sh/include/asm/fcntl.h
diff --git a/include/asm-sh/fixmap.h b/arch/sh/include/asm/fixmap.h
index 721fcc4..721fcc4 100644
--- a/include/asm-sh/fixmap.h
+++ b/arch/sh/include/asm/fixmap.h
diff --git a/include/asm-sh/flat.h b/arch/sh/include/asm/flat.h
index 0cc8002..0cc8002 100644
--- a/include/asm-sh/flat.h
+++ b/arch/sh/include/asm/flat.h
diff --git a/include/asm-sh/fpu.h b/arch/sh/include/asm/fpu.h
index 91462fe..91462fe 100644
--- a/include/asm-sh/fpu.h
+++ b/arch/sh/include/asm/fpu.h
diff --git a/include/asm-sh/freq.h b/arch/sh/include/asm/freq.h
index 39c0e09..4ece90b 100644
--- a/include/asm-sh/freq.h
+++ b/arch/sh/include/asm/freq.h
@@ -12,7 +12,7 @@
 #define __ASM_SH_FREQ_H
 #ifdef __KERNEL__
 
-#include <asm/cpu/freq.h>
+#include <cpu/freq.h>
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_FREQ_H */
diff --git a/include/asm-sh/futex-irq.h b/arch/sh/include/asm/futex-irq.h
index a9f16a7..a9f16a7 100644
--- a/include/asm-sh/futex-irq.h
+++ b/arch/sh/include/asm/futex-irq.h
diff --git a/include/asm-sh/futex.h b/arch/sh/include/asm/futex.h
index 68256ec..68256ec 100644
--- a/include/asm-sh/futex.h
+++ b/arch/sh/include/asm/futex.h
diff --git a/include/asm-sh/gpio.h b/arch/sh/include/asm/gpio.h
index 9bb27e0..cf32bd2 100644
--- a/include/asm-sh/gpio.h
+++ b/arch/sh/include/asm/gpio.h
@@ -13,7 +13,7 @@
 #define __ASM_SH_GPIO_H
 
 #if defined(CONFIG_CPU_SH3)
-#include <asm/cpu/gpio.h>
+#include <cpu/gpio.h>
 #endif
 
 #endif /* __ASM_SH_GPIO_H */
diff --git a/include/asm-sh/hardirq.h b/arch/sh/include/asm/hardirq.h
index 715ee23..715ee23 100644
--- a/include/asm-sh/hardirq.h
+++ b/arch/sh/include/asm/hardirq.h
diff --git a/include/asm-sh/hd64461.h b/arch/sh/include/asm/hd64461.h
index 8c1353b..8c1353b 100644
--- a/include/asm-sh/hd64461.h
+++ b/arch/sh/include/asm/hd64461.h
diff --git a/include/asm-sh/hd64465/gpio.h b/arch/sh/include/asm/hd64465/gpio.h
index a3cdca2..a3cdca2 100644
--- a/include/asm-sh/hd64465/gpio.h
+++ b/arch/sh/include/asm/hd64465/gpio.h
diff --git a/include/asm-sh/hd64465/hd64465.h b/arch/sh/include/asm/hd64465/hd64465.h
index cfd0e80..cfd0e80 100644
--- a/include/asm-sh/hd64465/hd64465.h
+++ b/arch/sh/include/asm/hd64465/hd64465.h
diff --git a/include/asm-sh/hd64465/io.h b/arch/sh/include/asm/hd64465/io.h
index 139f147..139f147 100644
--- a/include/asm-sh/hd64465/io.h
+++ b/arch/sh/include/asm/hd64465/io.h
diff --git a/include/asm-sh/heartbeat.h b/arch/sh/include/asm/heartbeat.h
index 724a43e..724a43e 100644
--- a/include/asm-sh/heartbeat.h
+++ b/arch/sh/include/asm/heartbeat.h
diff --git a/include/asm-sh/hp6xx.h b/arch/sh/include/asm/hp6xx.h
index 0d4165a..0d4165a 100644
--- a/include/asm-sh/hp6xx.h
+++ b/arch/sh/include/asm/hp6xx.h
diff --git a/include/asm-sh/hugetlb.h b/arch/sh/include/asm/hugetlb.h
index 967068f..967068f 100644
--- a/include/asm-sh/hugetlb.h
+++ b/arch/sh/include/asm/hugetlb.h
diff --git a/include/asm-sh/hw_irq.h b/arch/sh/include/asm/hw_irq.h
index d557b00..d557b00 100644
--- a/include/asm-sh/hw_irq.h
+++ b/arch/sh/include/asm/hw_irq.h
diff --git a/include/asm-sh/i2c-sh7760.h b/arch/sh/include/asm/i2c-sh7760.h
index 2418211..2418211 100644
--- a/include/asm-sh/i2c-sh7760.h
+++ b/arch/sh/include/asm/i2c-sh7760.h
diff --git a/include/asm-sh/ilsel.h b/arch/sh/include/asm/ilsel.h
index e3d304b..e3d304b 100644
--- a/include/asm-sh/ilsel.h
+++ b/arch/sh/include/asm/ilsel.h
diff --git a/include/asm-sh/io.h b/arch/sh/include/asm/io.h
index a4fbf0c..a4fbf0c 100644
--- a/include/asm-sh/io.h
+++ b/arch/sh/include/asm/io.h
diff --git a/include/asm-sh/io_generic.h b/arch/sh/include/asm/io_generic.h
index 92fc607..92fc607 100644
--- a/include/asm-sh/io_generic.h
+++ b/arch/sh/include/asm/io_generic.h
diff --git a/include/asm-sh/io_trapped.h b/arch/sh/include/asm/io_trapped.h
index f1251d4..f1251d4 100644
--- a/include/asm-sh/io_trapped.h
+++ b/arch/sh/include/asm/io_trapped.h
diff --git a/include/asm-sh/ioctl.h b/arch/sh/include/asm/ioctl.h
index b279fe0..b279fe0 100644
--- a/include/asm-sh/ioctl.h
+++ b/arch/sh/include/asm/ioctl.h
diff --git a/include/asm-sh/ioctls.h b/arch/sh/include/asm/ioctls.h
index c212c37..c212c37 100644
--- a/include/asm-sh/ioctls.h
+++ b/arch/sh/include/asm/ioctls.h
diff --git a/include/asm-sh/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h
index 5ffc997..5ffc997 100644
--- a/include/asm-sh/ipcbuf.h
+++ b/arch/sh/include/asm/ipcbuf.h
diff --git a/include/asm-sh/irq.h b/arch/sh/include/asm/irq.h
index ca66e5d..6195a53 100644
--- a/include/asm-sh/irq.h
+++ b/arch/sh/include/asm/irq.h
@@ -51,7 +51,7 @@ extern void irq_ctx_exit(int cpu);
 #endif
 
 #ifdef CONFIG_CPU_SH5
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #endif
 
 #endif /* __ASM_SH_IRQ_H */
diff --git a/include/asm-sh/irq_regs.h b/arch/sh/include/asm/irq_regs.h
index 3dd9c0b..3dd9c0b 100644
--- a/include/asm-sh/irq_regs.h
+++ b/arch/sh/include/asm/irq_regs.h
diff --git a/include/asm-sh/irqflags.h b/arch/sh/include/asm/irqflags.h
index 46e71da..46e71da 100644
--- a/include/asm-sh/irqflags.h
+++ b/arch/sh/include/asm/irqflags.h
diff --git a/include/asm-sh/irqflags_32.h b/arch/sh/include/asm/irqflags_32.h
index 60218f5..60218f5 100644
--- a/include/asm-sh/irqflags_32.h
+++ b/arch/sh/include/asm/irqflags_32.h
diff --git a/include/asm-sh/irqflags_64.h b/arch/sh/include/asm/irqflags_64.h
index 4f6b8a5..88f6522 100644
--- a/include/asm-sh/irqflags_64.h
+++ b/arch/sh/include/asm/irqflags_64.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_SH_IRQFLAGS_64_H
 #define __ASM_SH_IRQFLAGS_64_H
 
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 
 #define SR_MASK_LL	0x00000000000000f0LL
 #define SR_BL_LL	0x0000000010000000LL
diff --git a/include/asm-sh/kdebug.h b/arch/sh/include/asm/kdebug.h
index 49cd690..49cd690 100644
--- a/include/asm-sh/kdebug.h
+++ b/arch/sh/include/asm/kdebug.h
diff --git a/include/asm-sh/kexec.h b/arch/sh/include/asm/kexec.h
index 00f4260..00f4260 100644
--- a/include/asm-sh/kexec.h
+++ b/arch/sh/include/asm/kexec.h
diff --git a/include/asm-sh/kgdb.h b/arch/sh/include/asm/kgdb.h
index 24e4207..24e4207 100644
--- a/include/asm-sh/kgdb.h
+++ b/arch/sh/include/asm/kgdb.h
diff --git a/include/asm-sh/kmap_types.h b/arch/sh/include/asm/kmap_types.h
index 84d565c..84d565c 100644
--- a/include/asm-sh/kmap_types.h
+++ b/arch/sh/include/asm/kmap_types.h
diff --git a/include/asm-sh/lboxre2.h b/arch/sh/include/asm/lboxre2.h
index e6d1605..e6d1605 100644
--- a/include/asm-sh/lboxre2.h
+++ b/arch/sh/include/asm/lboxre2.h
diff --git a/include/asm-sh/linkage.h b/arch/sh/include/asm/linkage.h
index 3565a4f..3565a4f 100644
--- a/include/asm-sh/linkage.h
+++ b/arch/sh/include/asm/linkage.h
diff --git a/include/asm-sh/local.h b/arch/sh/include/asm/local.h
index 9ed9b9c..9ed9b9c 100644
--- a/include/asm-sh/local.h
+++ b/arch/sh/include/asm/local.h
diff --git a/include/asm-sh/machvec.h b/arch/sh/include/asm/machvec.h
index b2e4124..b2e4124 100644
--- a/include/asm-sh/machvec.h
+++ b/arch/sh/include/asm/machvec.h
diff --git a/include/asm-sh/magicpanelr2.h b/arch/sh/include/asm/magicpanelr2.h
index c644a77..c644a77 100644
--- a/include/asm-sh/magicpanelr2.h
+++ b/arch/sh/include/asm/magicpanelr2.h
diff --git a/include/asm-sh/mc146818rtc.h b/arch/sh/include/asm/mc146818rtc.h
index 0aee96a..0aee96a 100644
--- a/include/asm-sh/mc146818rtc.h
+++ b/arch/sh/include/asm/mc146818rtc.h
diff --git a/include/asm-sh/microdev.h b/arch/sh/include/asm/microdev.h
index 1aed158..1aed158 100644
--- a/include/asm-sh/microdev.h
+++ b/arch/sh/include/asm/microdev.h
diff --git a/include/asm-sh/migor.h b/arch/sh/include/asm/migor.h
index 10016e0..10016e0 100644
--- a/include/asm-sh/migor.h
+++ b/arch/sh/include/asm/migor.h
diff --git a/include/asm-sh/mman.h b/arch/sh/include/asm/mman.h
index 156eb02..156eb02 100644
--- a/include/asm-sh/mman.h
+++ b/arch/sh/include/asm/mman.h
diff --git a/include/asm-sh/mmu.h b/arch/sh/include/asm/mmu.h
index fdcb93b..fdcb93b 100644
--- a/include/asm-sh/mmu.h
+++ b/arch/sh/include/asm/mmu.h
diff --git a/include/asm-sh/mmu_context.h b/arch/sh/include/asm/mmu_context.h
index 8589a50..04c0c97 100644
--- a/include/asm-sh/mmu_context.h
+++ b/arch/sh/include/asm/mmu_context.h
@@ -8,7 +8,7 @@
 #define __ASM_SH_MMU_CONTEXT_H
 
 #ifdef __KERNEL__
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 #include <asm/tlbflush.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
diff --git a/include/asm-sh/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h
index f4f9aeb..f4f9aeb 100644
--- a/include/asm-sh/mmu_context_32.h
+++ b/arch/sh/include/asm/mmu_context_32.h
diff --git a/include/asm-sh/mmu_context_64.h b/arch/sh/include/asm/mmu_context_64.h
index 9649f1c..de12102 100644
--- a/include/asm-sh/mmu_context_64.h
+++ b/arch/sh/include/asm/mmu_context_64.h
@@ -11,7 +11,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 #include <asm/cacheflush.h>
 
 #define SR_ASID_MASK		0xffffffffff00ffffULL
diff --git a/include/asm-sh/mmzone.h b/arch/sh/include/asm/mmzone.h
index 2969253..2969253 100644
--- a/include/asm-sh/mmzone.h
+++ b/arch/sh/include/asm/mmzone.h
diff --git a/include/asm-sh/module.h b/arch/sh/include/asm/module.h
index 46eccd3..46eccd3 100644
--- a/include/asm-sh/module.h
+++ b/arch/sh/include/asm/module.h
diff --git a/include/asm-sh/msgbuf.h b/arch/sh/include/asm/msgbuf.h
index 5174323..5174323 100644
--- a/include/asm-sh/msgbuf.h
+++ b/arch/sh/include/asm/msgbuf.h
diff --git a/include/asm-sh/mutex.h b/arch/sh/include/asm/mutex.h
index 458c1f7..458c1f7 100644
--- a/include/asm-sh/mutex.h
+++ b/arch/sh/include/asm/mutex.h
diff --git a/include/asm-sh/page.h b/arch/sh/include/asm/page.h
index 77fb8bf..77fb8bf 100644
--- a/include/asm-sh/page.h
+++ b/arch/sh/include/asm/page.h
diff --git a/include/asm-sh/param.h b/arch/sh/include/asm/param.h
index ae245af..ae245af 100644
--- a/include/asm-sh/param.h
+++ b/arch/sh/include/asm/param.h
diff --git a/include/asm-sh/parport.h b/arch/sh/include/asm/parport.h
index f67ba60..f67ba60 100644
--- a/include/asm-sh/parport.h
+++ b/arch/sh/include/asm/parport.h
diff --git a/include/asm-sh/pci.h b/arch/sh/include/asm/pci.h
index df1d383..df1d383 100644
--- a/include/asm-sh/pci.h
+++ b/arch/sh/include/asm/pci.h
diff --git a/include/asm-sh/percpu.h b/arch/sh/include/asm/percpu.h
index 4db4b39..4db4b39 100644
--- a/include/asm-sh/percpu.h
+++ b/arch/sh/include/asm/percpu.h
diff --git a/include/asm-sh/pgalloc.h b/arch/sh/include/asm/pgalloc.h
index 84dd2db..84dd2db 100644
--- a/include/asm-sh/pgalloc.h
+++ b/arch/sh/include/asm/pgalloc.h
diff --git a/include/asm-sh/pgtable.h b/arch/sh/include/asm/pgtable.h
index a4a8f8b..a4a8f8b 100644
--- a/include/asm-sh/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
diff --git a/include/asm-sh/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
index 72ea209..72ea209 100644
--- a/include/asm-sh/pgtable_32.h
+++ b/arch/sh/include/asm/pgtable_32.h
diff --git a/include/asm-sh/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h
index c78990c..c78990c 100644
--- a/include/asm-sh/pgtable_64.h
+++ b/arch/sh/include/asm/pgtable_64.h
diff --git a/include/asm-sh/pm.h b/arch/sh/include/asm/pm.h
index 56fdbd6..56fdbd6 100644
--- a/include/asm-sh/pm.h
+++ b/arch/sh/include/asm/pm.h
diff --git a/include/asm-sh/poll.h b/arch/sh/include/asm/poll.h
index c98509d..c98509d 100644
--- a/include/asm-sh/poll.h
+++ b/arch/sh/include/asm/poll.h
diff --git a/include/asm-sh/posix_types.h b/arch/sh/include/asm/posix_types.h
index 4eeb723..4eeb723 100644
--- a/include/asm-sh/posix_types.h
+++ b/arch/sh/include/asm/posix_types.h
diff --git a/include/asm-sh/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h
index 0a3d2f5..0a3d2f5 100644
--- a/include/asm-sh/posix_types_32.h
+++ b/arch/sh/include/asm/posix_types_32.h
diff --git a/include/asm-sh/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h
index 0620317..0620317 100644
--- a/include/asm-sh/posix_types_64.h
+++ b/arch/sh/include/asm/posix_types_64.h
diff --git a/include/asm-sh/processor.h b/arch/sh/include/asm/processor.h
index 15d9f92..15d9f92 100644
--- a/include/asm-sh/processor.h
+++ b/arch/sh/include/asm/processor.h
diff --git a/include/asm-sh/processor_32.h b/arch/sh/include/asm/processor_32.h
index c6583f2..0dadd75 100644
--- a/include/asm-sh/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -19,7 +19,7 @@
  * Default implementation of macro that returns current
  * instruction pointer ("program counter").
  */
-#define current_text_addr() ({ void *pc; __asm__("mova	1f, %0\n1:":"=z" (pc)); pc; })
+#define current_text_addr() ({ void *pc; __asm__("mova	1f, %0\n.align 2\n1:":"=z" (pc)); pc; })
 
 /* Core Processor Version Register */
 #define CCN_PVR		0xff000030
diff --git a/include/asm-sh/processor_64.h b/arch/sh/include/asm/processor_64.h
index fc7fc68..770d516 100644
--- a/include/asm-sh/processor_64.h
+++ b/arch/sh/include/asm/processor_64.h
@@ -19,7 +19,7 @@
 #include <asm/types.h>
 #include <asm/cache.h>
 #include <asm/ptrace.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 
 /*
  * Default implementation of macro that returns current
diff --git a/include/asm-sh/ptrace.h b/arch/sh/include/asm/ptrace.h
index 643ab5a..643ab5a 100644
--- a/include/asm-sh/ptrace.h
+++ b/arch/sh/include/asm/ptrace.h
diff --git a/include/asm-sh/push-switch.h b/arch/sh/include/asm/push-switch.h
index 4903f9e..4903f9e 100644
--- a/include/asm-sh/push-switch.h
+++ b/arch/sh/include/asm/push-switch.h
diff --git a/include/asm-sh/r7780rp.h b/arch/sh/include/asm/r7780rp.h
index 306f735..306f735 100644
--- a/include/asm-sh/r7780rp.h
+++ b/arch/sh/include/asm/r7780rp.h
diff --git a/include/asm-sh/resource.h b/arch/sh/include/asm/resource.h
index 9c2499a..9c2499a 100644
--- a/include/asm-sh/resource.h
+++ b/arch/sh/include/asm/resource.h
diff --git a/include/asm-sh/rtc.h b/arch/sh/include/asm/rtc.h
index ec45ba8..1813f42 100644
--- a/include/asm-sh/rtc.h
+++ b/arch/sh/include/asm/rtc.h
@@ -11,6 +11,6 @@ struct sh_rtc_platform_info {
 	unsigned long capabilities;
 };
 
-#include <asm/cpu/rtc.h>
+#include <cpu/rtc.h>
 
 #endif /* _ASM_RTC_H */
diff --git a/include/asm-sh/rts7751r2d.h b/arch/sh/include/asm/rts7751r2d.h
index 0a80015..0a80015 100644
--- a/include/asm-sh/rts7751r2d.h
+++ b/arch/sh/include/asm/rts7751r2d.h
diff --git a/include/asm-sh/rwsem.h b/arch/sh/include/asm/rwsem.h
index 1987f3e..1987f3e 100644
--- a/include/asm-sh/rwsem.h
+++ b/arch/sh/include/asm/rwsem.h
diff --git a/include/asm-sh/scatterlist.h b/arch/sh/include/asm/scatterlist.h
index 2084d03..2084d03 100644
--- a/include/asm-sh/scatterlist.h
+++ b/arch/sh/include/asm/scatterlist.h
diff --git a/include/asm-sh/sdk7780.h b/arch/sh/include/asm/sdk7780.h
index 697dc86..697dc86 100644
--- a/include/asm-sh/sdk7780.h
+++ b/arch/sh/include/asm/sdk7780.h
diff --git a/include/asm-sh/sections.h b/arch/sh/include/asm/sections.h
index 8f8f4ad..8f8f4ad 100644
--- a/include/asm-sh/sections.h
+++ b/arch/sh/include/asm/sections.h
diff --git a/include/asm-sh/segment.h b/arch/sh/include/asm/segment.h
index 5e2725f..5e2725f 100644
--- a/include/asm-sh/segment.h
+++ b/arch/sh/include/asm/segment.h
diff --git a/include/asm-sh/sembuf.h b/arch/sh/include/asm/sembuf.h
index d79f3bd..d79f3bd 100644
--- a/include/asm-sh/sembuf.h
+++ b/arch/sh/include/asm/sembuf.h
diff --git a/include/asm-sh/serial.h b/arch/sh/include/asm/serial.h
index 21f6d33..e13cc94 100644
--- a/include/asm-sh/serial.h
+++ b/arch/sh/include/asm/serial.h
@@ -21,7 +21,7 @@
 #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
 
 #ifdef CONFIG_HD64465
-#include <asm/hd64465.h>
+#include <asm/hd64465/hd64465.h>
 
 #define SERIAL_PORT_DFNS                   \
         /* UART CLK   PORT IRQ     FLAGS        */                      \
diff --git a/include/asm-sh/setup.h b/arch/sh/include/asm/setup.h
index 55a2bd3..55a2bd3 100644
--- a/include/asm-sh/setup.h
+++ b/arch/sh/include/asm/setup.h
diff --git a/include/asm-sh/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h
index d3c5484..d3c5484 100644
--- a/include/asm-sh/sfp-machine.h
+++ b/arch/sh/include/asm/sfp-machine.h
diff --git a/include/asm-sh/sh7760fb.h b/arch/sh/include/asm/sh7760fb.h
index 8767f61..8767f61 100644
--- a/include/asm-sh/sh7760fb.h
+++ b/arch/sh/include/asm/sh7760fb.h
diff --git a/include/asm-sh/sh7763rdp.h b/arch/sh/include/asm/sh7763rdp.h
index 8750cc8..8750cc8 100644
--- a/include/asm-sh/sh7763rdp.h
+++ b/arch/sh/include/asm/sh7763rdp.h
diff --git a/include/asm-sh/sh7785lcr.h b/arch/sh/include/asm/sh7785lcr.h
index 1ce27d5..1ce27d5 100644
--- a/include/asm-sh/sh7785lcr.h
+++ b/arch/sh/include/asm/sh7785lcr.h
diff --git a/include/asm-sh/sh_bios.h b/arch/sh/include/asm/sh_bios.h
index 0ca2619..0ca2619 100644
--- a/include/asm-sh/sh_bios.h
+++ b/arch/sh/include/asm/sh_bios.h
diff --git a/include/asm-sh/sh_keysc.h b/arch/sh/include/asm/sh_keysc.h
index b5a4dd5..b5a4dd5 100644
--- a/include/asm-sh/sh_keysc.h
+++ b/arch/sh/include/asm/sh_keysc.h
diff --git a/include/asm-sh/sh_mobile_lcdc.h b/arch/sh/include/asm/sh_mobile_lcdc.h
index 27677727..27677727 100644
--- a/include/asm-sh/sh_mobile_lcdc.h
+++ b/arch/sh/include/asm/sh_mobile_lcdc.h
diff --git a/include/asm-sh/shmbuf.h b/arch/sh/include/asm/shmbuf.h
index b2101f4..b2101f4 100644
--- a/include/asm-sh/shmbuf.h
+++ b/arch/sh/include/asm/shmbuf.h
diff --git a/include/asm-sh/shmin.h b/arch/sh/include/asm/shmin.h
index 36ba138..36ba138 100644
--- a/include/asm-sh/shmin.h
+++ b/arch/sh/include/asm/shmin.h
diff --git a/include/asm-sh/shmparam.h b/arch/sh/include/asm/shmparam.h
index ba1758d..ba1758d 100644
--- a/include/asm-sh/shmparam.h
+++ b/arch/sh/include/asm/shmparam.h
diff --git a/include/asm-sh/sigcontext.h b/arch/sh/include/asm/sigcontext.h
index 8ce1435..8ce1435 100644
--- a/include/asm-sh/sigcontext.h
+++ b/arch/sh/include/asm/sigcontext.h
diff --git a/include/asm-sh/siginfo.h b/arch/sh/include/asm/siginfo.h
index 813040e..813040e 100644
--- a/include/asm-sh/siginfo.h
+++ b/arch/sh/include/asm/siginfo.h
diff --git a/include/asm-sh/signal.h b/arch/sh/include/asm/signal.h
index 5c5c1e8..5c5c1e8 100644
--- a/include/asm-sh/signal.h
+++ b/arch/sh/include/asm/signal.h
diff --git a/include/asm-sh/smc37c93x.h b/arch/sh/include/asm/smc37c93x.h
index 585da2a..585da2a 100644
--- a/include/asm-sh/smc37c93x.h
+++ b/arch/sh/include/asm/smc37c93x.h
diff --git a/include/asm-sh/smp.h b/arch/sh/include/asm/smp.h
index 593343c..593343c 100644
--- a/include/asm-sh/smp.h
+++ b/arch/sh/include/asm/smp.h
diff --git a/include/asm-sh/snapgear.h b/arch/sh/include/asm/snapgear.h
index 042d95f..042d95f 100644
--- a/include/asm-sh/snapgear.h
+++ b/arch/sh/include/asm/snapgear.h
diff --git a/include/asm-sh/socket.h b/arch/sh/include/asm/socket.h
index 6d4bf65..6d4bf65 100644
--- a/include/asm-sh/socket.h
+++ b/arch/sh/include/asm/socket.h
diff --git a/include/asm-sh/sockios.h b/arch/sh/include/asm/sockios.h
index cf8b96b..cf8b96b 100644
--- a/include/asm-sh/sockios.h
+++ b/arch/sh/include/asm/sockios.h
diff --git a/include/asm-sh/sparsemem.h b/arch/sh/include/asm/sparsemem.h
index 547a540..547a540 100644
--- a/include/asm-sh/sparsemem.h
+++ b/arch/sh/include/asm/sparsemem.h
diff --git a/include/asm-sh/spi.h b/arch/sh/include/asm/spi.h
index e96f5b0..e96f5b0 100644
--- a/include/asm-sh/spi.h
+++ b/arch/sh/include/asm/spi.h
diff --git a/include/asm-sh/spinlock.h b/arch/sh/include/asm/spinlock.h
index e793181..e793181 100644
--- a/include/asm-sh/spinlock.h
+++ b/arch/sh/include/asm/spinlock.h
diff --git a/include/asm-sh/spinlock_types.h b/arch/sh/include/asm/spinlock_types.h
index b4d244e..b4d244e 100644
--- a/include/asm-sh/spinlock_types.h
+++ b/arch/sh/include/asm/spinlock_types.h
diff --git a/include/asm-sh/stat.h b/arch/sh/include/asm/stat.h
index e1810cc..e1810cc 100644
--- a/include/asm-sh/stat.h
+++ b/arch/sh/include/asm/stat.h
diff --git a/include/asm-sh/statfs.h b/arch/sh/include/asm/statfs.h
index 9202a02..9202a02 100644
--- a/include/asm-sh/statfs.h
+++ b/arch/sh/include/asm/statfs.h
diff --git a/include/asm-sh/string.h b/arch/sh/include/asm/string.h
index 8c1ea21d..8c1ea21d 100644
--- a/include/asm-sh/string.h
+++ b/arch/sh/include/asm/string.h
diff --git a/include/asm-sh/string_32.h b/arch/sh/include/asm/string_32.h
index 55f8db6..55f8db6 100644
--- a/include/asm-sh/string_32.h
+++ b/arch/sh/include/asm/string_32.h
diff --git a/include/asm-sh/string_64.h b/arch/sh/include/asm/string_64.h
index aa1fef2..aa1fef2 100644
--- a/include/asm-sh/string_64.h
+++ b/arch/sh/include/asm/string_64.h
diff --git a/include/asm-sh/system.h b/arch/sh/include/asm/system.h
index 056d68c..056d68c 100644
--- a/include/asm-sh/system.h
+++ b/arch/sh/include/asm/system.h
diff --git a/include/asm-sh/system_32.h b/arch/sh/include/asm/system_32.h
index f11bcf0..f11bcf0 100644
--- a/include/asm-sh/system_32.h
+++ b/arch/sh/include/asm/system_32.h
diff --git a/include/asm-sh/system_64.h b/arch/sh/include/asm/system_64.h
index 943acf5..943acf5 100644
--- a/include/asm-sh/system_64.h
+++ b/arch/sh/include/asm/system_64.h
diff --git a/include/asm-sh/systemh7751.h b/arch/sh/include/asm/systemh7751.h
index 4161122..4161122 100644
--- a/include/asm-sh/systemh7751.h
+++ b/arch/sh/include/asm/systemh7751.h
diff --git a/include/asm-sh/termbits.h b/arch/sh/include/asm/termbits.h
index 77db116..77db116 100644
--- a/include/asm-sh/termbits.h
+++ b/arch/sh/include/asm/termbits.h
diff --git a/include/asm-sh/termios.h b/arch/sh/include/asm/termios.h
index 0a8c793..0a8c793 100644
--- a/include/asm-sh/termios.h
+++ b/arch/sh/include/asm/termios.h
diff --git a/include/asm-sh/thread_info.h b/arch/sh/include/asm/thread_info.h
index eeb4c74..eeb4c74 100644
--- a/include/asm-sh/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
diff --git a/include/asm-sh/timer.h b/arch/sh/include/asm/timer.h
index 327f7eb..a7ca3a1 100644
--- a/include/asm-sh/timer.h
+++ b/arch/sh/include/asm/timer.h
@@ -3,7 +3,7 @@
 
 #include <linux/sysdev.h>
 #include <linux/clocksource.h>
-#include <asm/cpu/timer.h>
+#include <cpu/timer.h>
 
 struct sys_timer_ops {
 	int (*init)(void);
diff --git a/include/asm-sh/timex.h b/arch/sh/include/asm/timex.h
index a873e24..a873e24 100644
--- a/include/asm-sh/timex.h
+++ b/arch/sh/include/asm/timex.h
diff --git a/include/asm-sh/titan.h b/arch/sh/include/asm/titan.h
index 03f3583..03f3583 100644
--- a/include/asm-sh/titan.h
+++ b/arch/sh/include/asm/titan.h
diff --git a/include/asm-sh/tlb.h b/arch/sh/include/asm/tlb.h
index 88ff1ae..88ff1ae 100644
--- a/include/asm-sh/tlb.h
+++ b/arch/sh/include/asm/tlb.h
diff --git a/include/asm-sh/tlb_64.h b/arch/sh/include/asm/tlb_64.h
index 0a96f3a..0a96f3a 100644
--- a/include/asm-sh/tlb_64.h
+++ b/arch/sh/include/asm/tlb_64.h
diff --git a/include/asm-sh/tlbflush.h b/arch/sh/include/asm/tlbflush.h
index e0ac972..e0ac972 100644
--- a/include/asm-sh/tlbflush.h
+++ b/arch/sh/include/asm/tlbflush.h
diff --git a/include/asm-sh/topology.h b/arch/sh/include/asm/topology.h
index 95f0085..95f0085 100644
--- a/include/asm-sh/topology.h
+++ b/arch/sh/include/asm/topology.h
diff --git a/include/asm-sh/types.h b/arch/sh/include/asm/types.h
index beea4e6..beea4e6 100644
--- a/include/asm-sh/types.h
+++ b/arch/sh/include/asm/types.h
diff --git a/include/asm-sh/uaccess.h b/arch/sh/include/asm/uaccess.h
index 45c2c9b..075848f 100644
--- a/include/asm-sh/uaccess.h
+++ b/arch/sh/include/asm/uaccess.h
@@ -77,8 +77,9 @@ struct __large_struct { unsigned long buf[100]; };
 ({								\
 	long __pu_err;						\
 	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__typeof__(*(ptr)) __pu_val = x;			\
 	__chk_user_ptr(ptr);					\
-	__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	__put_user_size(__pu_val, __pu_addr, (size), __pu_err);	\
 	__pu_err;						\
 })
 
@@ -86,8 +87,9 @@ struct __large_struct { unsigned long buf[100]; };
 ({								\
 	long __pu_err = -EFAULT;				\
 	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__typeof__(*(ptr)) __pu_val = x;			\
 	if (likely(access_ok(VERIFY_WRITE, __pu_addr, size)))	\
-		__put_user_size((x), __pu_addr, (size),		\
+		__put_user_size(__pu_val, __pu_addr, (size),	\
 				__pu_err);			\
 	__pu_err;						\
 })
diff --git a/include/asm-sh/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h
index 892fd6d..ae0d24f 100644
--- a/include/asm-sh/uaccess_32.h
+++ b/arch/sh/include/asm/uaccess_32.h
@@ -76,8 +76,7 @@ do {							\
 		__put_user_asm(x, ptr, retval, "w");	\
 		break;					\
 	case 4:						\
-		__put_user_asm((u32)x, ptr,		\
-			       retval, "l");		\
+		__put_user_asm(x, ptr, retval, "l");	\
 		break;					\
 	case 8:						\
 		__put_user_u64(x, ptr, retval);		\
diff --git a/include/asm-sh/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h
index 81b3d51..81b3d51 100644
--- a/include/asm-sh/uaccess_64.h
+++ b/arch/sh/include/asm/uaccess_64.h
diff --git a/include/asm-sh/ubc.h b/arch/sh/include/asm/ubc.h
index 56f4e30..a7b9028 100644
--- a/include/asm-sh/ubc.h
+++ b/arch/sh/include/asm/ubc.h
@@ -12,7 +12,7 @@
 #define __ASM_SH_UBC_H
 #ifdef __KERNEL__
 
-#include <asm/cpu/ubc.h>
+#include <cpu/ubc.h>
 
 /* User Break Controller */
 #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
diff --git a/include/asm-sh/ucontext.h b/arch/sh/include/asm/ucontext.h
index 202ef1d..202ef1d 100644
--- a/include/asm-sh/ucontext.h
+++ b/arch/sh/include/asm/ucontext.h
diff --git a/include/asm-sh/unaligned.h b/arch/sh/include/asm/unaligned.h
index c1641a0..c1641a0 100644
--- a/include/asm-sh/unaligned.h
+++ b/arch/sh/include/asm/unaligned.h
diff --git a/include/asm-sh/unistd.h b/arch/sh/include/asm/unistd.h
index 65be656..65be656 100644
--- a/include/asm-sh/unistd.h
+++ b/arch/sh/include/asm/unistd.h
diff --git a/include/asm-sh/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index d52c000..d52c000 100644
--- a/include/asm-sh/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
diff --git a/include/asm-sh/unistd_64.h b/arch/sh/include/asm/unistd_64.h
index 7c54e91..7c54e91 100644
--- a/include/asm-sh/unistd_64.h
+++ b/arch/sh/include/asm/unistd_64.h
diff --git a/include/asm-sh/user.h b/arch/sh/include/asm/user.h
index 8fd3cf6..8fd3cf6 100644
--- a/include/asm-sh/user.h
+++ b/arch/sh/include/asm/user.h
diff --git a/include/asm-sh/vga.h b/arch/sh/include/asm/vga.h
index 06a5de8..06a5de8 100644
--- a/include/asm-sh/vga.h
+++ b/arch/sh/include/asm/vga.h
diff --git a/include/asm-sh/watchdog.h b/arch/sh/include/asm/watchdog.h
index d19ea62..f024fed 100644
--- a/include/asm-sh/watchdog.h
+++ b/arch/sh/include/asm/watchdog.h
@@ -13,11 +13,11 @@
 #ifdef __KERNEL__
 
 #include <linux/types.h>
-#include <asm/cpu/watchdog.h>
+#include <cpu/watchdog.h>
 #include <asm/io.h>
 
 /* 
- * See asm/cpu-sh2/watchdog.h for explanation of this stupidity..
+ * See cpu-sh2/watchdog.h for explanation of this stupidity..
  */
 #ifndef WTCNT_R
 #  define WTCNT_R	WTCNT
diff --git a/include/asm-sh/xor.h b/arch/sh/include/asm/xor.h
index c82eb12..c82eb12 100644
--- a/include/asm-sh/xor.h
+++ b/arch/sh/include/asm/xor.h
diff --git a/include/asm-sh/cpu-sh2/addrspace.h b/arch/sh/include/cpu-common/cpu/addrspace.h
index 2b9ab93..2b9ab93 100644
--- a/include/asm-sh/cpu-sh2/addrspace.h
+++ b/arch/sh/include/cpu-common/cpu/addrspace.h
diff --git a/include/asm-sh/cpu-sh2/cacheflush.h b/arch/sh/include/cpu-common/cpu/cacheflush.h
index 2979efb..c3db00b7 100644
--- a/include/asm-sh/cpu-sh2/cacheflush.h
+++ b/arch/sh/include/cpu-common/cpu/cacheflush.h
@@ -10,7 +10,7 @@
 #ifndef __ASM_CPU_SH2_CACHEFLUSH_H
 #define __ASM_CPU_SH2_CACHEFLUSH_H
 
-/* 
+/*
  * Cache flushing:
  *
  *  - flush_cache_all() flushes entire cache
@@ -40,5 +40,5 @@
 #define flush_cache_sigtramp(vaddr)		do { } while (0)
 
 #define p3_cache_init()				do { } while (0)
-#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
 
+#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh2/mmu_context.h b/arch/sh/include/cpu-common/cpu/mmu_context.h
index beeb299..beeb299 100644
--- a/include/asm-sh/cpu-sh2/mmu_context.h
+++ b/arch/sh/include/cpu-common/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh2/rtc.h b/arch/sh/include/cpu-common/cpu/rtc.h
index 39e2d6e..39e2d6e 100644
--- a/include/asm-sh/cpu-sh2/rtc.h
+++ b/arch/sh/include/cpu-common/cpu/rtc.h
diff --git a/include/asm-sh/cpu-sh2/sigcontext.h b/arch/sh/include/cpu-common/cpu/sigcontext.h
index fe5c15d..fe5c15d 100644
--- a/include/asm-sh/cpu-sh2/sigcontext.h
+++ b/arch/sh/include/cpu-common/cpu/sigcontext.h
diff --git a/include/asm-sh/cpu-sh2/timer.h b/arch/sh/include/cpu-common/cpu/timer.h
index a39c241..a39c241 100644
--- a/include/asm-sh/cpu-sh2/timer.h
+++ b/arch/sh/include/cpu-common/cpu/timer.h
diff --git a/include/asm-sh/cpu-sh2/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h
index 4e0b165..4e0b165 100644
--- a/include/asm-sh/cpu-sh2/cache.h
+++ b/arch/sh/include/cpu-sh2/cpu/cache.h
diff --git a/include/asm-sh/cpu-sh2/dma.h b/arch/sh/include/cpu-sh2/cpu/dma.h
index d66b43c..d66b43c 100644
--- a/include/asm-sh/cpu-sh2/dma.h
+++ b/arch/sh/include/cpu-sh2/cpu/dma.h
diff --git a/include/asm-sh/cpu-sh2/freq.h b/arch/sh/include/cpu-sh2/cpu/freq.h
index 31de475..31de475 100644
--- a/include/asm-sh/cpu-sh2/freq.h
+++ b/arch/sh/include/cpu-sh2/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh2/ubc.h b/arch/sh/include/cpu-sh2/cpu/ubc.h
index ba0e87f..ba0e87f 100644
--- a/include/asm-sh/cpu-sh2/ubc.h
+++ b/arch/sh/include/cpu-sh2/cpu/ubc.h
diff --git a/include/asm-sh/cpu-sh2/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h
index 393161c..393161c 100644
--- a/include/asm-sh/cpu-sh2/watchdog.h
+++ b/arch/sh/include/cpu-sh2/cpu/watchdog.h
diff --git a/include/asm-sh/cpu-sh2a/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h
index afe228b..afe228b 100644
--- a/include/asm-sh/cpu-sh2a/cache.h
+++ b/arch/sh/include/cpu-sh2a/cpu/cache.h
diff --git a/arch/sh/include/cpu-sh2a/cpu/dma.h b/arch/sh/include/cpu-sh2a/cpu/dma.h
new file mode 100644
index 0000000..27a13ef
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/dma.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/dma.h>
diff --git a/include/asm-sh/cpu-sh2a/freq.h b/arch/sh/include/cpu-sh2a/cpu/freq.h
index 830fd43..830fd43 100644
--- a/include/asm-sh/cpu-sh2a/freq.h
+++ b/arch/sh/include/cpu-sh2a/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh2a/rtc.h b/arch/sh/include/cpu-sh2a/cpu/rtc.h
index afb511e..afb511e 100644
--- a/include/asm-sh/cpu-sh2a/rtc.h
+++ b/arch/sh/include/cpu-sh2a/cpu/rtc.h
diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h
new file mode 100644
index 0000000..8ce2fc1c
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/ubc.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/ubc.h>
diff --git a/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
new file mode 100644
index 0000000..e7e8259
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/watchdog.h>
diff --git a/include/asm-sh/cpu-sh3/adc.h b/arch/sh/include/cpu-sh3/cpu/adc.h
index b289e3c..b289e3c 100644
--- a/include/asm-sh/cpu-sh3/adc.h
+++ b/arch/sh/include/cpu-sh3/cpu/adc.h
diff --git a/include/asm-sh/cpu-sh3/cache.h b/arch/sh/include/cpu-sh3/cpu/cache.h
index bee2d81..bee2d81 100644
--- a/include/asm-sh/cpu-sh3/cache.h
+++ b/arch/sh/include/cpu-sh3/cpu/cache.h
diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
new file mode 100644
index 0000000..abc9098
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
@@ -0,0 +1,36 @@
+/*
+ * include/asm-sh/cpu-sh3/cacheflush.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
+#define __ASM_CPU_SH3_CACHEFLUSH_H
+
+#if defined(CONFIG_SH7705_CACHE_32KB)
+/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
+ * SH4. Unlike the SH4 this is a unified cache so we need to do some work
+ * in mmap when 'exec'ing a new binary
+ */
+ /* 32KB cache, 4kb PAGE sizes need to check bit 12 */
+#define CACHE_ALIAS 0x00001000
+
+#define PG_mapped	PG_arch_1
+
+void flush_cache_all(void);
+void flush_cache_mm(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+                              unsigned long end);
+void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
+void flush_dcache_page(struct page *pg);
+void flush_icache_range(unsigned long start, unsigned long end);
+void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+#else
+#include <cpu-common/cpu/cacheflush.h>
+#endif
+
+#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh3/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h
index 05fda83..05fda83 100644
--- a/include/asm-sh/cpu-sh3/dac.h
+++ b/arch/sh/include/cpu-sh3/cpu/dac.h
diff --git a/include/asm-sh/cpu-sh3/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h
index 6813c32..6813c32 100644
--- a/include/asm-sh/cpu-sh3/dma.h
+++ b/arch/sh/include/cpu-sh3/cpu/dma.h
diff --git a/include/asm-sh/cpu-sh3/freq.h b/arch/sh/include/cpu-sh3/cpu/freq.h
index 53c6230..53c6230 100644
--- a/include/asm-sh/cpu-sh3/freq.h
+++ b/arch/sh/include/cpu-sh3/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh3/gpio.h b/arch/sh/include/cpu-sh3/cpu/gpio.h
index 4e53eb3..4e53eb3 100644
--- a/include/asm-sh/cpu-sh3/gpio.h
+++ b/arch/sh/include/cpu-sh3/cpu/gpio.h
diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/arch/sh/include/cpu-sh3/cpu/mmu_context.h
index ab09da7..ab09da7 100644
--- a/include/asm-sh/cpu-sh3/mmu_context.h
+++ b/arch/sh/include/cpu-sh3/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh3/timer.h b/arch/sh/include/cpu-sh3/cpu/timer.h
index 793acf1..793acf1 100644
--- a/include/asm-sh/cpu-sh3/timer.h
+++ b/arch/sh/include/cpu-sh3/cpu/timer.h
diff --git a/include/asm-sh/cpu-sh3/ubc.h b/arch/sh/include/cpu-sh3/cpu/ubc.h
index 4e6381d..4e6381d 100644
--- a/include/asm-sh/cpu-sh3/ubc.h
+++ b/arch/sh/include/cpu-sh3/cpu/ubc.h
diff --git a/include/asm-sh/cpu-sh3/watchdog.h b/arch/sh/include/cpu-sh3/cpu/watchdog.h
index 4ee0347..4ee0347 100644
--- a/include/asm-sh/cpu-sh3/watchdog.h
+++ b/arch/sh/include/cpu-sh3/cpu/watchdog.h
diff --git a/include/asm-sh/cpu-sh4/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h
index a3fa733..a3fa733 100644
--- a/include/asm-sh/cpu-sh4/addrspace.h
+++ b/arch/sh/include/cpu-sh4/cpu/addrspace.h
diff --git a/include/asm-sh/cpu-sh4/cache.h b/arch/sh/include/cpu-sh4/cpu/cache.h
index 1c61ebf..1c61ebf 100644
--- a/include/asm-sh/cpu-sh4/cache.h
+++ b/arch/sh/include/cpu-sh4/cpu/cache.h
diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
index 065306d..065306d 100644
--- a/include/asm-sh/cpu-sh4/cacheflush.h
+++ b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
diff --git a/include/asm-sh/cpu-sh4/dma-sh7780.h b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h
index 71b426a..71b426a 100644
--- a/include/asm-sh/cpu-sh4/dma-sh7780.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h
diff --git a/include/asm-sh/cpu-sh4/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h
index aaf71b0..235b7cd 100644
--- a/include/asm-sh/cpu-sh4/dma.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma.h
@@ -20,7 +20,7 @@
 #define CHCR_TS_MASK	0x18
 #define CHCR_TS_SHIFT	3
 
-#include <asm/cpu/dma-sh7780.h>
+#include <cpu/dma-sh7780.h>
 #else
 #define SH_DMAC_BASE	0xffa00000
 
diff --git a/include/asm-sh/cpu-sh4/fpu.h b/arch/sh/include/cpu-sh4/cpu/fpu.h
index febef73..febef73 100644
--- a/include/asm-sh/cpu-sh4/fpu.h
+++ b/arch/sh/include/cpu-sh4/cpu/fpu.h
diff --git a/include/asm-sh/cpu-sh4/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h
index c23af81..c23af81 100644
--- a/include/asm-sh/cpu-sh4/freq.h
+++ b/arch/sh/include/cpu-sh4/cpu/freq.h
diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
index 9ea8eb2..9ea8eb2 100644
--- a/include/asm-sh/cpu-sh4/mmu_context.h
+++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh4/rtc.h b/arch/sh/include/cpu-sh4/cpu/rtc.h
index 25b1e6a..25b1e6a 100644
--- a/include/asm-sh/cpu-sh4/rtc.h
+++ b/arch/sh/include/cpu-sh4/cpu/rtc.h
diff --git a/include/asm-sh/cpu-sh4/sigcontext.h b/arch/sh/include/cpu-sh4/cpu/sigcontext.h
index ab392f1..ab392f1 100644
--- a/include/asm-sh/cpu-sh4/sigcontext.h
+++ b/arch/sh/include/cpu-sh4/cpu/sigcontext.h
diff --git a/include/asm-sh/cpu-sh4/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h
index 586d649..586d649 100644
--- a/include/asm-sh/cpu-sh4/sq.h
+++ b/arch/sh/include/cpu-sh4/cpu/sq.h
diff --git a/include/asm-sh/cpu-sh4/timer.h b/arch/sh/include/cpu-sh4/cpu/timer.h
index d1e796b..d1e796b 100644
--- a/include/asm-sh/cpu-sh4/timer.h
+++ b/arch/sh/include/cpu-sh4/cpu/timer.h
diff --git a/include/asm-sh/cpu-sh4/ubc.h b/arch/sh/include/cpu-sh4/cpu/ubc.h
index c86e170..c86e170 100644
--- a/include/asm-sh/cpu-sh4/ubc.h
+++ b/arch/sh/include/cpu-sh4/cpu/ubc.h
diff --git a/include/asm-sh/cpu-sh4/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h
index 259f6a0..259f6a0 100644
--- a/include/asm-sh/cpu-sh4/watchdog.h
+++ b/arch/sh/include/cpu-sh4/cpu/watchdog.h
diff --git a/include/asm-sh/cpu-sh5/addrspace.h b/arch/sh/include/cpu-sh5/cpu/addrspace.h
index dc36b9a..dc36b9a 100644
--- a/include/asm-sh/cpu-sh5/addrspace.h
+++ b/arch/sh/include/cpu-sh5/cpu/addrspace.h
diff --git a/include/asm-sh/cpu-sh5/cache.h b/arch/sh/include/cpu-sh5/cpu/cache.h
index ed050ab..ed050ab 100644
--- a/include/asm-sh/cpu-sh5/cache.h
+++ b/arch/sh/include/cpu-sh5/cpu/cache.h
diff --git a/include/asm-sh/cpu-sh5/cacheflush.h b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
index 5a11f0b..5a11f0b 100644
--- a/include/asm-sh/cpu-sh5/cacheflush.h
+++ b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
diff --git a/include/asm-sh/cpu-sh5/dma.h b/arch/sh/include/cpu-sh5/cpu/dma.h
index 7bf6bb3..7bf6bb3 100644
--- a/include/asm-sh/cpu-sh5/dma.h
+++ b/arch/sh/include/cpu-sh5/cpu/dma.h
diff --git a/include/asm-sh/cpu-sh5/irq.h b/arch/sh/include/cpu-sh5/cpu/irq.h
index f0f0756e..f0f0756e 100644
--- a/include/asm-sh/cpu-sh5/irq.h
+++ b/arch/sh/include/cpu-sh5/cpu/irq.h
diff --git a/include/asm-sh/cpu-sh5/mmu_context.h b/arch/sh/include/cpu-sh5/cpu/mmu_context.h
index 68a1d2c..68a1d2c 100644
--- a/include/asm-sh/cpu-sh5/mmu_context.h
+++ b/arch/sh/include/cpu-sh5/cpu/mmu_context.h
diff --git a/include/asm-sh/cpu-sh5/registers.h b/arch/sh/include/cpu-sh5/cpu/registers.h
index 6664ea6..6664ea6 100644
--- a/include/asm-sh/cpu-sh5/registers.h
+++ b/arch/sh/include/cpu-sh5/cpu/registers.h
diff --git a/include/asm-sh/cpu-sh5/rtc.h b/arch/sh/include/cpu-sh5/cpu/rtc.h
index 12ea0ed..12ea0ed 100644
--- a/include/asm-sh/cpu-sh5/rtc.h
+++ b/arch/sh/include/cpu-sh5/cpu/rtc.h
diff --git a/include/asm-sh/dreamcast/dma.h b/arch/sh/include/mach-dreamcast/mach/dma.h
index ddd68e7..ddd68e7 100644
--- a/include/asm-sh/dreamcast/dma.h
+++ b/arch/sh/include/mach-dreamcast/mach/dma.h
diff --git a/include/asm-sh/dreamcast/maple.h b/arch/sh/include/mach-dreamcast/mach/maple.h
index 51f6a87..51f6a87 100644
--- a/include/asm-sh/dreamcast/maple.h
+++ b/arch/sh/include/mach-dreamcast/mach/maple.h
diff --git a/include/asm-sh/dreamcast/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h
index e401b24..75fc900 100644
--- a/include/asm-sh/dreamcast/pci.h
+++ b/arch/sh/include/mach-dreamcast/mach/pci.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_SH_DREAMCAST_PCI_H
 #define __ASM_SH_DREAMCAST_PCI_H
 
-#include <asm/mach/sysasic.h>
+#include <mach-dreamcast/mach/sysasic.h>
 
 #define	GAPSPCI_REGS		0x01001400
 #define GAPSPCI_DMA_BASE	0x01840000
diff --git a/include/asm-sh/dreamcast/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h
index f334266..f334266 100644
--- a/include/asm-sh/dreamcast/sysasic.h
+++ b/arch/sh/include/mach-dreamcast/mach/sysasic.h
diff --git a/include/asm-sh/landisk/gio.h b/arch/sh/include/mach-landisk/mach/gio.h
index 35d7368..35d7368 100644
--- a/include/asm-sh/landisk/gio.h
+++ b/arch/sh/include/mach-landisk/mach/gio.h
diff --git a/include/asm-sh/landisk/iodata_landisk.h b/arch/sh/include/mach-landisk/mach/iodata_landisk.h
index 6fb04ab..6fb04ab 100644
--- a/include/asm-sh/landisk/iodata_landisk.h
+++ b/arch/sh/include/mach-landisk/mach/iodata_landisk.h
diff --git a/include/asm-sh/se.h b/arch/sh/include/mach-se/mach/se.h
index eb23000..eb23000 100644
--- a/include/asm-sh/se.h
+++ b/arch/sh/include/mach-se/mach/se.h
diff --git a/include/asm-sh/se7206.h b/arch/sh/include/mach-se/mach/se7206.h
index 698eb80..698eb80 100644
--- a/include/asm-sh/se7206.h
+++ b/arch/sh/include/mach-se/mach/se7206.h
diff --git a/include/asm-sh/se7343.h b/arch/sh/include/mach-se/mach/se7343.h
index 9845846..9845846 100644
--- a/include/asm-sh/se7343.h
+++ b/arch/sh/include/mach-se/mach/se7343.h
diff --git a/include/asm-sh/se7721.h b/arch/sh/include/mach-se/mach/se7721.h
index b957f60..b957f60 100644
--- a/include/asm-sh/se7721.h
+++ b/arch/sh/include/mach-se/mach/se7721.h
diff --git a/include/asm-sh/se7722.h b/arch/sh/include/mach-se/mach/se7722.h
index e971d9a..e971d9a 100644
--- a/include/asm-sh/se7722.h
+++ b/arch/sh/include/mach-se/mach/se7722.h
diff --git a/include/asm-sh/se7751.h b/arch/sh/include/mach-se/mach/se7751.h
index b36792a..b36792a 100644
--- a/include/asm-sh/se7751.h
+++ b/arch/sh/include/mach-se/mach/se7751.h
diff --git a/include/asm-sh/se7780.h b/arch/sh/include/mach-se/mach/se7780.h
index 40e9b41..40e9b41 100644
--- a/include/asm-sh/se7780.h
+++ b/arch/sh/include/mach-se/mach/se7780.h
diff --git a/include/asm-sh/sh03/io.h b/arch/sh/include/mach-sh03/mach/io.h
index c39c785..c39c785 100644
--- a/include/asm-sh/sh03/io.h
+++ b/arch/sh/include/mach-sh03/mach/io.h
diff --git a/include/asm-sh/sh03/sh03.h b/arch/sh/include/mach-sh03/mach/sh03.h
index 19c40b8..19c40b8 100644
--- a/include/asm-sh/sh03/sh03.h
+++ b/arch/sh/include/mach-sh03/mach/sh03.h
diff --git a/arch/sh/kernel/.gitignore b/arch/sh/kernel/.gitignore
new file mode 100644
index 0000000..c5f676c
--- /dev/null
+++ b/arch/sh/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index d3d9f32..bea4033 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -80,11 +80,11 @@ static int __init cf_init_default(void)
 }
 
 #if defined(CONFIG_SH_SOLUTION_ENGINE)
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 #elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
 #elif defined(CONFIG_SH_7721_SOLUTION_ENGINE)
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
 #endif
 
 /*
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index 79baa47..726f033 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -20,7 +20,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/bitops.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include <asm/page.h>
 
 /*
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index ee894e5..becc54c45 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -14,7 +14,7 @@
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 #include <asm/unistd.h>
 #include <asm/errno.h>
 #include <asm/page.h>
diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S
index 47096dc..ab3903e 100644
--- a/arch/sh/kernel/cpu/sh2a/entry.S
+++ b/arch/sh/kernel/cpu/sh2a/entry.S
@@ -14,7 +14,7 @@
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 #include <asm/unistd.h>
 #include <asm/errno.h>
 #include <asm/page.h>
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 4004073..3fe482d 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -14,7 +14,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/unistd.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 #include <asm/page.h>
 
 ! NOTE:
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index 8020796..2d452f6 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -13,7 +13,7 @@
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/io.h>
-#include <asm/cpu/fpu.h>
+#include <cpu/fpu.h>
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/fpu.h>
diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c
index 7b2d337..828cb57 100644
--- a/arch/sh/kernel/cpu/sh4/softfloat.c
+++ b/arch/sh/kernel/cpu/sh4/softfloat.c
@@ -36,7 +36,7 @@
  * and Kamel Khelifi <kamel.khelifi@st.com>
  */
 #include <linux/kernel.h>
-#include <asm/cpu/fpu.h>
+#include <cpu/fpu.h>
 
 #define LIT64( a ) a##LL
 
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 9561b02..dcdf959 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -22,7 +22,7 @@
 #include <linux/io.h>
 #include <asm/page.h>
 #include <asm/cacheflush.h>
-#include <asm/cpu/sq.h>
+#include <cpu/sq.h>
 
 struct sq_mapping;
 
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index 05372ed..ca08e7f 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -11,7 +11,7 @@
  */
 #include <linux/errno.h>
 #include <linux/sys.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 #include <asm/processor.h>
 #include <asm/unistd.h>
 #include <asm/thread_info.h>
diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S
index f42d4c0..7ccfb99 100644
--- a/arch/sh/kernel/head_64.S
+++ b/arch/sh/kernel/head_64.S
@@ -11,8 +11,8 @@
 #include <asm/page.h>
 #include <asm/cache.h>
 #include <asm/tlb.h>
-#include <asm/cpu/registers.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/registers.h>
+#include <cpu/mmu_context.h>
 #include <asm/thread_info.h>
 
 /*
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index a2a99e4..64b7690 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -15,7 +15,7 @@
 #include <asm/machvec.h>
 #include <asm/uaccess.h>
 #include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 
 atomic_t irq_err_count;
 
diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c
index 022a55f..791edab 100644
--- a/arch/sh/kernel/time_64.c
+++ b/arch/sh/kernel/time_64.c
@@ -33,8 +33,8 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
-#include <asm/cpu/registers.h>	 /* required by inline __asm__ stmt. */
-#include <asm/cpu/irq.h>
+#include <cpu/registers.h>	 /* required by inline __asm__ stmt. */
+#include <cpu/irq.h>
 #include <asm/addrspace.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c
index ff559e2..da32ba7 100644
--- a/arch/sh/lib64/panic.c
+++ b/arch/sh/lib64/panic.c
@@ -8,7 +8,7 @@
 
 #include <linux/kernel.h>
 #include <asm/io.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 
 /* THIS IS A PHYSICAL ADDRESS */
 #define HDSP2534_ADDR (0x04002100)
diff --git a/arch/sh/mm/fault_64.c b/arch/sh/mm/fault_64.c
index 399d537..bd63b96 100644
--- a/arch/sh/mm/fault_64.c
+++ b/arch/sh/mm/fault_64.c
@@ -39,7 +39,7 @@
 #include <asm/uaccess.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 
 /* Callable from fault.c, so not static */
 inline void __do_tlb_refill(unsigned long address,
diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile
index 567516b..b5d202b 100644
--- a/arch/sh/tools/Makefile
+++ b/arch/sh/tools/Makefile
@@ -10,7 +10,7 @@
 # Shamelessly cloned from ARM.
 #
 
-include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
+arch/sh/include/asm/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
 	@echo '  Generating $@'
-	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
+	$(Q)if [ ! -d arch/sh/include/asm ]; then mkdir -p arch/sh/include/asm; fi
 	$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 5047490..d741f35 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -362,19 +362,7 @@ static irqreturn_t line_write_interrupt(int irq, void *data)
 	if (tty == NULL)
 		return IRQ_NONE;
 
-	if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) &&
-	   (tty->ldisc.write_wakeup != NULL))
-		(tty->ldisc.write_wakeup)(tty);
-
-	/*
-	 * BLOCKING mode
-	 * In blocking mode, everything sleeps on tty->write_wait.
-	 * Sleeping in the console driver would break non-blocking
-	 * writes.
-	 */
-
-	if (waitqueue_active(&tty->write_wait))
-		wake_up_interruptible(&tty->write_wait);
+	tty_wakeup(tty);
 	return IRQ_HANDLED;
 }
 
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index 1fa8be5..eaff0bb 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -99,3 +99,4 @@ int is_uv_system(void)
 {
 	return uv_system_type != UV_NONE;
 }
+EXPORT_SYMBOL_GPL(is_uv_system);
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 8dbffb8..87d4d69 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -123,6 +123,14 @@ void __init pci_iommu_alloc(void)
 
 	pci_swiotlb_init();
 }
+
+unsigned long iommu_num_pages(unsigned long addr, unsigned long len)
+{
+	unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE);
+
+	return size >> PAGE_SHIFT;
+}
+EXPORT_SYMBOL(iommu_num_pages);
 #endif
 
 /*
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index b520dae..2d88858 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -788,10 +788,6 @@ void __init setup_arch(char **cmdline_p)
 
 	initmem_init(0, max_pfn);
 
-#ifdef CONFIG_X86_64
-	dma32_reserve_bootmem();
-#endif
-
 #ifdef CONFIG_ACPI_SLEEP
 	/*
 	 * Reserve low memory region for sleep support.
@@ -806,6 +802,15 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	reserve_crashkernel();
 
+#ifdef CONFIG_X86_64
+	/*
+	 * dma32_reserve_bootmem() allocates bootmem which may conflict
+	 * with the crashkernel command line, so do that after
+	 * reserve_crashkernel()
+	 */
+	dma32_reserve_bootmem();
+#endif
+
 	reserve_ibft_region();
 
 #ifdef CONFIG_KVM_CLOCK
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index dfdf428..f118c11 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -52,7 +52,7 @@
 	jnz 100b
 102:
 	.section .fixup,"ax"
-103:	addl %r8d,%edx			/* ecx is zerorest also */
+103:	addl %ecx,%edx			/* ecx is zerorest also */
 	jmp copy_user_handle_tail
 	.previous
 
diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S
index 40e0e30..cb0c112 100644
--- a/arch/x86/lib/copy_user_nocache_64.S
+++ b/arch/x86/lib/copy_user_nocache_64.S
@@ -32,7 +32,7 @@
 	jnz 100b
 102:
 	.section .fixup,"ax"
-103:	addl %r8d,%edx			/* ecx is zerorest also */
+103:	addl %ecx,%edx			/* ecx is zerorest also */
 	jmp copy_user_handle_tail
 	.previous
 
@@ -108,7 +108,6 @@ ENTRY(__copy_user_nocache)
 	jmp 60f
 50:	movl %ecx,%edx
 60:	sfence
-	movl %r8d,%ecx
 	jmp copy_user_handle_tail
 	.previous
 
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index b474996..0133af4 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -64,7 +64,13 @@ static DEFINE_MUTEX(performance_mutex);
  * policy is adjusted accordingly.
  */
 
-static unsigned int ignore_ppc = 0;
+/* ignore_ppc:
+ * -1 -> cpufreq low level drivers not initialized -> _PSS, etc. not called yet
+ *       ignore _PPC
+ *  0 -> cpufreq low level drivers initialized -> consider _PPC values
+ *  1 -> ignore _PPC totally -> forced by user through boot param
+ */
+static unsigned int ignore_ppc = -1;
 module_param(ignore_ppc, uint, 0644);
 MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
 		 "limited by BIOS, this should help");
@@ -72,7 +78,7 @@ MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
 #define PPC_REGISTERED   1
 #define PPC_IN_USE       2
 
-static int acpi_processor_ppc_status = 0;
+static int acpi_processor_ppc_status;
 
 static int acpi_processor_ppc_notifier(struct notifier_block *nb,
 				       unsigned long event, void *data)
@@ -81,13 +87,18 @@ static int acpi_processor_ppc_notifier(struct notifier_block *nb,
 	struct acpi_processor *pr;
 	unsigned int ppc = 0;
 
-	if (ignore_ppc)
+	if (event == CPUFREQ_START && ignore_ppc <= 0) {
+		ignore_ppc = 0;
 		return 0;
+	}
 
-	mutex_lock(&performance_mutex);
+	if (ignore_ppc)
+		return 0;
 
 	if (event != CPUFREQ_INCOMPATIBLE)
-		goto out;
+		return 0;
+
+	mutex_lock(&performance_mutex);
 
 	pr = per_cpu(processors, policy->cpu);
 	if (!pr || !pr->performance)
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index 71ec426..1e0455b 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -39,8 +39,8 @@
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/delay.h>
-#include <asm/mach/dma.h>
-#include <asm/mach/sysasic.h>
+#include <mach/dma.h>
+#include <mach/sysasic.h>
 
 #define GDROM_DEV_NAME "gdrom"
 #define GD_SESSION_OFFSET 150
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 1926883..f52931e 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -66,8 +66,8 @@
 #include <linux/ctype.h>
 
 #ifdef CONFIG_PPC_OF
-#include <asm/of_device.h>
-#include <asm/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
 #endif
 
 #define PFX "ipmi_si: "
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index e30575e..b638403 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -1612,8 +1612,10 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 
 	switch (cmd) {
 	case MOXA_GET_MAJOR:
-		printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl %x, fix "
-				"your userspace\n", current->comm, cmd);
+		if (printk_ratelimit())
+			printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl "
+					"%x (GET_MAJOR), fix your userspace\n",
+					current->comm, cmd);
 		return put_user(ttymajor, (int __user *)argp);
 
 	case MOXA_CHKPORTENABLE:
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 8d6a3ff..8a67f16 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -825,6 +825,9 @@ static int cpufreq_add_dev(struct sys_device *sys_dev)
 	policy->user_policy.min = policy->cpuinfo.min_freq;
 	policy->user_policy.max = policy->cpuinfo.max_freq;
 
+	blocking_notifier_call_chain(&cpufreq_policy_notifier_list,
+				     CPUFREQ_START, policy);
+
 #ifdef CONFIG_SMP
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
index 11f1744..d53fbbf 100644
--- a/drivers/firmware/iscsi_ibft_find.c
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -81,4 +81,3 @@ void __init reserve_ibft_region(void)
 	if (ibft_addr)
 		reserve_bootmem(pos, PAGE_ALIGN(len), BOOTMEM_DEFAULT);
 }
-EXPORT_SYMBOL_GPL(reserve_ibft_region);
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index c521bf6..fa2be26 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1086,6 +1086,11 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 	/* Make sure we have sane timings */
 	sanitize_timings(pmif);
 
+	host = ide_host_alloc(&d, hws);
+	if (host == NULL)
+		return -ENOMEM;
+	hwif = host->ports[0];
+
 #ifndef CONFIG_PPC64
 	/* XXX FIXME: Media bay stuff need re-organizing */
 	if (np->parent && np->parent->name
@@ -1119,11 +1124,11 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
 			 pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
 			 pmif->mediabay ? " (mediabay)" : "", hw->irq);
 
-	rc = ide_host_add(&d, hws, &host);
-	if (rc)
+	rc = ide_host_register(host, &d, hws);
+	if (rc) {
+		ide_host_free(host);
 		return rc;
-
-	hwif = host->ports[0];
+	}
 
 	return 0;
 }
diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c
index 2b40428..7797ef6 100644
--- a/drivers/input/keyboard/maple_keyb.c
+++ b/drivers/input/keyboard/maple_keyb.c
@@ -27,7 +27,6 @@
 #include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/maple.h>
-#include <asm/mach/maple.h>
 
 /* Very simple mutex to ensure proper cleanup */
 static DEFINE_MUTEX(maple_keyb_mutex);
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f5ade19..fa50e9e 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -426,7 +426,7 @@ config ENCLOSURE_SERVICES
 
 config SGI_XP
 	tristate "Support communication between SGI SSIs"
-	depends on IA64_GENERIC || IA64_SGI_SN2
+	depends on IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || (X86_64 && SMP)
 	select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
 	select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
 	---help---
@@ -450,4 +450,27 @@ config HP_ILO
 	  To compile this driver as a module, choose M here: the
 	  module will be called hpilo.
 
+config SGI_GRU
+	tristate "SGI GRU driver"
+	depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP
+	default n
+	select MMU_NOTIFIER
+	---help---
+	The GRU is a hardware resource located in the system chipset. The GRU
+	contains memory that can be mmapped into the user address space. This memory is
+	used to communicate with the GRU to perform functions such as load/store,
+	scatter/gather, bcopy, AMOs, etc.  The GRU is directly accessed by user
+	instructions using user virtual addresses. GRU instructions (ex., bcopy) use
+	user virtual addresses for operands.
+
+	If you are not running on a SGI UV system, say N.
+
+config SGI_GRU_DEBUG
+	bool  "SGI GRU driver debug"
+	depends on SGI_GRU
+	default n
+	---help---
+	This option enables addition debugging code for the SGI GRU driver. If
+	you are unsure, say N.
+
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index f5e2734..c6c13f6 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -28,4 +28,5 @@ obj-$(CONFIG_INTEL_MENLOW)	+= intel_menlow.o
 obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
 obj-$(CONFIG_KGDB_TESTS)	+= kgdbts.o
 obj-$(CONFIG_SGI_XP)		+= sgi-xp/
+obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
diff --git a/drivers/misc/sgi-gru/Makefile b/drivers/misc/sgi-gru/Makefile
new file mode 100644
index 0000000..d03597a
--- /dev/null
+++ b/drivers/misc/sgi-gru/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_SGI_GRU) := gru.o
+gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o
+
diff --git a/drivers/misc/sgi-gru/gru.h b/drivers/misc/sgi-gru/gru.h
new file mode 100644
index 0000000..40df7cb
--- /dev/null
+++ b/drivers/misc/sgi-gru/gru.h
@@ -0,0 +1,67 @@
+/*
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Lesser General Public License as published by
+ *  the Free Software Foundation; either version 2.1 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRU_H__
+#define __GRU_H__
+
+/*
+ * GRU architectural definitions
+ */
+#define GRU_CACHE_LINE_BYTES		64
+#define GRU_HANDLE_STRIDE		256
+#define GRU_CB_BASE			0
+#define GRU_DS_BASE			0x20000
+
+/*
+ * Size used to map GRU GSeg
+ */
+#if defined CONFIG_IA64
+#define GRU_GSEG_PAGESIZE	(256 * 1024UL)
+#elif defined CONFIG_X86_64
+#define GRU_GSEG_PAGESIZE	(256 * 1024UL)		/* ZZZ 2MB ??? */
+#else
+#error "Unsupported architecture"
+#endif
+
+/*
+ * Structure for obtaining GRU resource information
+ */
+struct gru_chiplet_info {
+	int	node;
+	int	chiplet;
+	int	blade;
+	int	total_dsr_bytes;
+	int	total_cbr;
+	int	total_user_dsr_bytes;
+	int	total_user_cbr;
+	int	free_user_dsr_bytes;
+	int	free_user_cbr;
+};
+
+/* Flags for GRU options on the gru_create_context() call */
+/* Select one of the follow 4 options to specify how TLB misses are handled */
+#define GRU_OPT_MISS_DEFAULT	0x0000	/* Use default mode */
+#define GRU_OPT_MISS_USER_POLL	0x0001	/* User will poll CB for faults */
+#define GRU_OPT_MISS_FMM_INTR	0x0002	/* Send interrupt to cpu to
+					   handle fault */
+#define GRU_OPT_MISS_FMM_POLL	0x0003	/* Use system polling thread */
+#define GRU_OPT_MISS_MASK	0x0003	/* Mask for TLB MISS option */
+
+
+
+#endif		/* __GRU_H__ */
diff --git a/drivers/misc/sgi-gru/gru_instructions.h b/drivers/misc/sgi-gru/gru_instructions.h
new file mode 100644
index 0000000..0dc3622
--- /dev/null
+++ b/drivers/misc/sgi-gru/gru_instructions.h
@@ -0,0 +1,669 @@
+/*
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Lesser General Public License as published by
+ *  the Free Software Foundation; either version 2.1 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRU_INSTRUCTIONS_H__
+#define __GRU_INSTRUCTIONS_H__
+
+#define gru_flush_cache_hook(p)
+#define gru_emulator_wait_hook(p, w)
+
+/*
+ * Architecture dependent functions
+ */
+
+#if defined CONFIG_IA64
+#include <linux/compiler.h>
+#include <asm/intrinsics.h>
+#define __flush_cache(p)		ia64_fc(p)
+/* Use volatile on IA64 to ensure ordering via st4.rel */
+#define gru_ordered_store_int(p,v)					\
+		do {							\
+			barrier();					\
+			*((volatile int *)(p)) = v; /* force st.rel */	\
+		} while (0)
+#elif defined CONFIG_X86_64
+#define __flush_cache(p)		clflush(p)
+#define gru_ordered_store_int(p,v)					\
+		do {							\
+			barrier();					\
+			*(int *)p = v;					\
+		} while (0)
+#else
+#error "Unsupported architecture"
+#endif
+
+/*
+ * Control block status and exception codes
+ */
+#define CBS_IDLE			0
+#define CBS_EXCEPTION			1
+#define CBS_ACTIVE			2
+#define CBS_CALL_OS			3
+
+/* CB substatus bitmasks */
+#define CBSS_MSG_QUEUE_MASK		7
+#define CBSS_IMPLICIT_ABORT_ACTIVE_MASK	8
+
+/* CB substatus message queue values (low 3 bits of substatus) */
+#define CBSS_NO_ERROR			0
+#define CBSS_LB_OVERFLOWED		1
+#define CBSS_QLIMIT_REACHED		2
+#define CBSS_PAGE_OVERFLOW		3
+#define CBSS_AMO_NACKED			4
+#define CBSS_PUT_NACKED			5
+
+/*
+ * Structure used to fetch exception detail for CBs that terminate with
+ * CBS_EXCEPTION
+ */
+struct control_block_extended_exc_detail {
+	unsigned long	cb;
+	int		opc;
+	int		ecause;
+	int		exopc;
+	long		exceptdet0;
+	int		exceptdet1;
+};
+
+/*
+ * Instruction formats
+ */
+
+/*
+ * Generic instruction format.
+ * This definition has precise bit field definitions.
+ */
+struct gru_instruction_bits {
+    /* DW 0  - low */
+    unsigned int		icmd:      1;
+    unsigned char		ima:	   3;	/* CB_DelRep, unmapped mode */
+    unsigned char		reserved0: 4;
+    unsigned int		xtype:     3;
+    unsigned int		iaa0:      2;
+    unsigned int		iaa1:      2;
+    unsigned char		reserved1: 1;
+    unsigned char		opc:       8;	/* opcode */
+    unsigned char		exopc:     8;	/* extended opcode */
+    /* DW 0  - high */
+    unsigned int		idef2:    22;	/* TRi0 */
+    unsigned char		reserved2: 2;
+    unsigned char		istatus:   2;
+    unsigned char		isubstatus:4;
+    unsigned char		reserved3: 2;
+    /* DW 1 */
+    unsigned long		idef4;		/* 42 bits: TRi1, BufSize */
+    /* DW 2-6 */
+    unsigned long		idef1;		/* BAddr0 */
+    unsigned long		idef5;		/* Nelem */
+    unsigned long		idef6;		/* Stride, Operand1 */
+    unsigned long		idef3;		/* BAddr1, Value, Operand2 */
+    unsigned long		reserved4;
+    /* DW 7 */
+    unsigned long		avalue;		 /* AValue */
+};
+
+/*
+ * Generic instruction with friendlier names. This format is used
+ * for inline instructions.
+ */
+struct gru_instruction {
+    /* DW 0 */
+    unsigned int		op32;    /* icmd,xtype,iaa0,ima,opc */
+    unsigned int		tri0;
+    unsigned long		tri1_bufsize;		/* DW 1 */
+    unsigned long		baddr0;			/* DW 2 */
+    unsigned long		nelem;			/* DW 3 */
+    unsigned long		op1_stride;		/* DW 4 */
+    unsigned long		op2_value_baddr1;	/* DW 5 */
+    unsigned long		reserved0;		/* DW 6 */
+    unsigned long		avalue;			/* DW 7 */
+};
+
+/* Some shifts and masks for the low 32 bits of a GRU command */
+#define GRU_CB_ICMD_SHFT	0
+#define GRU_CB_ICMD_MASK	0x1
+#define GRU_CB_XTYPE_SHFT	8
+#define GRU_CB_XTYPE_MASK	0x7
+#define GRU_CB_IAA0_SHFT	11
+#define GRU_CB_IAA0_MASK	0x3
+#define GRU_CB_IAA1_SHFT	13
+#define GRU_CB_IAA1_MASK	0x3
+#define GRU_CB_IMA_SHFT		1
+#define GRU_CB_IMA_MASK		0x3
+#define GRU_CB_OPC_SHFT		16
+#define GRU_CB_OPC_MASK		0xff
+#define GRU_CB_EXOPC_SHFT	24
+#define GRU_CB_EXOPC_MASK	0xff
+
+/* GRU instruction opcodes (opc field) */
+#define OP_NOP		0x00
+#define OP_BCOPY	0x01
+#define OP_VLOAD	0x02
+#define OP_IVLOAD	0x03
+#define OP_VSTORE	0x04
+#define OP_IVSTORE	0x05
+#define OP_VSET		0x06
+#define OP_IVSET	0x07
+#define OP_MESQ		0x08
+#define OP_GAMXR	0x09
+#define OP_GAMIR	0x0a
+#define OP_GAMIRR	0x0b
+#define OP_GAMER	0x0c
+#define OP_GAMERR	0x0d
+#define OP_BSTORE	0x0e
+#define OP_VFLUSH	0x0f
+
+
+/* Extended opcodes values (exopc field) */
+
+/* GAMIR - AMOs with implicit operands */
+#define EOP_IR_FETCH	0x01 /* Plain fetch of memory */
+#define EOP_IR_CLR	0x02 /* Fetch and clear */
+#define EOP_IR_INC	0x05 /* Fetch and increment */
+#define EOP_IR_DEC	0x07 /* Fetch and decrement */
+#define EOP_IR_QCHK1	0x0d /* Queue check, 64 byte msg */
+#define EOP_IR_QCHK2	0x0e /* Queue check, 128 byte msg */
+
+/* GAMIRR - Registered AMOs with implicit operands */
+#define EOP_IRR_FETCH	0x01 /* Registered fetch of memory */
+#define EOP_IRR_CLR	0x02 /* Registered fetch and clear */
+#define EOP_IRR_INC	0x05 /* Registered fetch and increment */
+#define EOP_IRR_DEC	0x07 /* Registered fetch and decrement */
+#define EOP_IRR_DECZ	0x0f /* Registered fetch and decrement, update on zero*/
+
+/* GAMER - AMOs with explicit operands */
+#define EOP_ER_SWAP	0x00 /* Exchange argument and memory */
+#define EOP_ER_OR	0x01 /* Logical OR with memory */
+#define EOP_ER_AND	0x02 /* Logical AND with memory */
+#define EOP_ER_XOR	0x03 /* Logical XOR with memory */
+#define EOP_ER_ADD	0x04 /* Add value to memory */
+#define EOP_ER_CSWAP	0x08 /* Compare with operand2, write operand1 if match*/
+#define EOP_ER_CADD	0x0c /* Queue check, operand1*64 byte msg */
+
+/* GAMERR - Registered AMOs with explicit operands */
+#define EOP_ERR_SWAP	0x00 /* Exchange argument and memory */
+#define EOP_ERR_OR	0x01 /* Logical OR with memory */
+#define EOP_ERR_AND	0x02 /* Logical AND with memory */
+#define EOP_ERR_XOR	0x03 /* Logical XOR with memory */
+#define EOP_ERR_ADD	0x04 /* Add value to memory */
+#define EOP_ERR_CSWAP	0x08 /* Compare with operand2, write operand1 if match*/
+#define EOP_ERR_EPOLL	0x09 /* Poll for equality */
+#define EOP_ERR_NPOLL	0x0a /* Poll for inequality */
+
+/* GAMXR - SGI Arithmetic unit */
+#define EOP_XR_CSWAP	0x0b /* Masked compare exchange */
+
+
+/* Transfer types (xtype field) */
+#define XTYPE_B		0x0	/* byte */
+#define XTYPE_S		0x1	/* short (2-byte) */
+#define XTYPE_W		0x2	/* word (4-byte) */
+#define XTYPE_DW	0x3	/* doubleword (8-byte) */
+#define XTYPE_CL	0x6	/* cacheline (64-byte) */
+
+
+/* Instruction access attributes (iaa0, iaa1 fields) */
+#define IAA_RAM		0x0	/* normal cached RAM access */
+#define IAA_NCRAM	0x2	/* noncoherent RAM access */
+#define IAA_MMIO	0x1	/* noncoherent memory-mapped I/O space */
+#define IAA_REGISTER	0x3	/* memory-mapped registers, etc. */
+
+
+/* Instruction mode attributes (ima field) */
+#define IMA_MAPPED	0x0	/* Virtual mode  */
+#define IMA_CB_DELAY	0x1	/* hold read responses until status changes */
+#define IMA_UNMAPPED	0x2	/* bypass the TLBs (OS only) */
+#define IMA_INTERRUPT	0x4	/* Interrupt when instruction completes */
+
+/* CBE ecause bits */
+#define CBE_CAUSE_RI				(1 << 0)
+#define CBE_CAUSE_INVALID_INSTRUCTION		(1 << 1)
+#define CBE_CAUSE_UNMAPPED_MODE_FORBIDDEN	(1 << 2)
+#define CBE_CAUSE_PE_CHECK_DATA_ERROR		(1 << 3)
+#define CBE_CAUSE_IAA_GAA_MISMATCH		(1 << 4)
+#define CBE_CAUSE_DATA_SEGMENT_LIMIT_EXCEPTION	(1 << 5)
+#define CBE_CAUSE_OS_FATAL_TLB_FAULT		(1 << 6)
+#define CBE_CAUSE_EXECUTION_HW_ERROR		(1 << 7)
+#define CBE_CAUSE_TLBHW_ERROR			(1 << 8)
+#define CBE_CAUSE_RA_REQUEST_TIMEOUT		(1 << 9)
+#define CBE_CAUSE_HA_REQUEST_TIMEOUT		(1 << 10)
+#define CBE_CAUSE_RA_RESPONSE_FATAL		(1 << 11)
+#define CBE_CAUSE_RA_RESPONSE_NON_FATAL		(1 << 12)
+#define CBE_CAUSE_HA_RESPONSE_FATAL		(1 << 13)
+#define CBE_CAUSE_HA_RESPONSE_NON_FATAL		(1 << 14)
+#define CBE_CAUSE_ADDRESS_SPACE_DECODE_ERROR	(1 << 15)
+#define CBE_CAUSE_RESPONSE_DATA_ERROR		(1 << 16)
+#define CBE_CAUSE_PROTOCOL_STATE_DATA_ERROR	(1 << 17)
+
+/*
+ * Exceptions are retried for the following cases. If any OTHER bits are set
+ * in ecause, the exception is not retryable.
+ */
+#define EXCEPTION_RETRY_BITS (CBE_CAUSE_RESPONSE_DATA_ERROR |		\
+			      CBE_CAUSE_RA_REQUEST_TIMEOUT |		\
+			      CBE_CAUSE_TLBHW_ERROR |			\
+			      CBE_CAUSE_HA_REQUEST_TIMEOUT)
+
+/* Message queue head structure */
+union gru_mesqhead {
+	unsigned long	val;
+	struct {
+		unsigned int	head;
+		unsigned int	limit;
+	};
+};
+
+
+/* Generate the low word of a GRU instruction */
+static inline unsigned int
+__opword(unsigned char opcode, unsigned char exopc, unsigned char xtype,
+       unsigned char iaa0, unsigned char iaa1,
+       unsigned char ima)
+{
+    return (1 << GRU_CB_ICMD_SHFT) |
+	   (iaa0 << GRU_CB_IAA0_SHFT) |
+	   (iaa1 << GRU_CB_IAA1_SHFT) |
+	   (ima << GRU_CB_IMA_SHFT) |
+	   (xtype << GRU_CB_XTYPE_SHFT) |
+	   (opcode << GRU_CB_OPC_SHFT) |
+	   (exopc << GRU_CB_EXOPC_SHFT);
+}
+
+/*
+ * Architecture specific intrinsics
+ */
+static inline void gru_flush_cache(void *p)
+{
+	__flush_cache(p);
+}
+
+/*
+ * Store the lower 32 bits of the command including the "start" bit. Then
+ * start the instruction executing.
+ */
+static inline void gru_start_instruction(struct gru_instruction *ins, int op32)
+{
+	gru_ordered_store_int(ins, op32);
+}
+
+
+/* Convert "hints" to IMA */
+#define CB_IMA(h)		((h) | IMA_UNMAPPED)
+
+/* Convert data segment cache line index into TRI0 / TRI1 value */
+#define GRU_DINDEX(i)		((i) * GRU_CACHE_LINE_BYTES)
+
+/* Inline functions for GRU instructions.
+ *     Note:
+ *     	- nelem and stride are in elements
+ *     	- tri0/tri1 is in bytes for the beginning of the data segment.
+ */
+static inline void gru_vload(void *cb, unsigned long mem_addr,
+		unsigned int tri0, unsigned char xtype, unsigned long nelem,
+		unsigned long stride, unsigned long hints)
+{
+	struct gru_instruction *ins = (struct gru_instruction *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	ins->op1_stride = stride;
+	gru_start_instruction(ins, __opword(OP_VLOAD, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_vstore(void *cb, unsigned long mem_addr,
+		unsigned int tri0, unsigned char xtype, unsigned long nelem,
+		unsigned long stride, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	ins->op1_stride = stride;
+	gru_start_instruction(ins, __opword(OP_VSTORE, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_ivload(void *cb, unsigned long mem_addr,
+		unsigned int tri0, unsigned int tri1, unsigned char xtype,
+		unsigned long nelem, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	ins->tri1_bufsize = tri1;
+	gru_start_instruction(ins, __opword(OP_IVLOAD, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_ivstore(void *cb, unsigned long mem_addr,
+		unsigned int tri0, unsigned int tri1,
+		unsigned char xtype, unsigned long nelem, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	ins->tri1_bufsize = tri1;
+	gru_start_instruction(ins, __opword(OP_IVSTORE, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_vset(void *cb, unsigned long mem_addr,
+		unsigned long value, unsigned char xtype, unsigned long nelem,
+		unsigned long stride, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->op2_value_baddr1 = value;
+	ins->nelem = nelem;
+	ins->op1_stride = stride;
+	gru_start_instruction(ins, __opword(OP_VSET, 0, xtype, IAA_RAM, 0,
+					 CB_IMA(hints)));
+}
+
+static inline void gru_ivset(void *cb, unsigned long mem_addr,
+		unsigned int tri1, unsigned long value, unsigned char xtype,
+		unsigned long nelem, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->op2_value_baddr1 = value;
+	ins->nelem = nelem;
+	ins->tri1_bufsize = tri1;
+	gru_start_instruction(ins, __opword(OP_IVSET, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_vflush(void *cb, unsigned long mem_addr,
+		unsigned long nelem, unsigned char xtype, unsigned long stride,
+		unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)mem_addr;
+	ins->op1_stride = stride;
+	ins->nelem = nelem;
+	gru_start_instruction(ins, __opword(OP_VFLUSH, 0, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_nop(void *cb, int hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	gru_start_instruction(ins, __opword(OP_NOP, 0, 0, 0, 0, CB_IMA(hints)));
+}
+
+
+static inline void gru_bcopy(void *cb, const unsigned long src,
+		unsigned long dest,
+		unsigned int tri0, unsigned int xtype, unsigned long nelem,
+		unsigned int bufsize, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	ins->op2_value_baddr1 = (long)dest;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	ins->tri1_bufsize = bufsize;
+	gru_start_instruction(ins, __opword(OP_BCOPY, 0, xtype, IAA_RAM,
+					IAA_RAM, CB_IMA(hints)));
+}
+
+static inline void gru_bstore(void *cb, const unsigned long src,
+		unsigned long dest, unsigned int tri0, unsigned int xtype,
+		unsigned long nelem, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	ins->op2_value_baddr1 = (long)dest;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	gru_start_instruction(ins, __opword(OP_BSTORE, 0, xtype, 0, IAA_RAM,
+					CB_IMA(hints)));
+}
+
+static inline void gru_gamir(void *cb, int exopc, unsigned long src,
+		unsigned int xtype, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	gru_start_instruction(ins, __opword(OP_GAMIR, exopc, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_gamirr(void *cb, int exopc, unsigned long src,
+		unsigned int xtype, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	gru_start_instruction(ins, __opword(OP_GAMIRR, exopc, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_gamer(void *cb, int exopc, unsigned long src,
+		unsigned int xtype,
+		unsigned long operand1, unsigned long operand2,
+		unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	ins->op1_stride = operand1;
+	ins->op2_value_baddr1 = operand2;
+	gru_start_instruction(ins, __opword(OP_GAMER, exopc, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_gamerr(void *cb, int exopc, unsigned long src,
+		unsigned int xtype, unsigned long operand1,
+		unsigned long operand2, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	ins->op1_stride = operand1;
+	ins->op2_value_baddr1 = operand2;
+	gru_start_instruction(ins, __opword(OP_GAMERR, exopc, xtype, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline void gru_gamxr(void *cb, unsigned long src,
+		unsigned int tri0, unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)src;
+	ins->nelem = 4;
+	gru_start_instruction(ins, __opword(OP_GAMXR, EOP_XR_CSWAP, XTYPE_DW,
+				 IAA_RAM, 0, CB_IMA(hints)));
+}
+
+static inline void gru_mesq(void *cb, unsigned long queue,
+		unsigned long tri0, unsigned long nelem,
+		unsigned long hints)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	ins->baddr0 = (long)queue;
+	ins->nelem = nelem;
+	ins->tri0 = tri0;
+	gru_start_instruction(ins, __opword(OP_MESQ, 0, XTYPE_CL, IAA_RAM, 0,
+					CB_IMA(hints)));
+}
+
+static inline unsigned long gru_get_amo_value(void *cb)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	return ins->avalue;
+}
+
+static inline int gru_get_amo_value_head(void *cb)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	return ins->avalue & 0xffffffff;
+}
+
+static inline int gru_get_amo_value_limit(void *cb)
+{
+	struct gru_instruction *ins = (void *)cb;
+
+	return ins->avalue >> 32;
+}
+
+static inline union gru_mesqhead  gru_mesq_head(int head, int limit)
+{
+	union gru_mesqhead mqh;
+
+	mqh.head = head;
+	mqh.limit = limit;
+	return mqh;
+}
+
+/*
+ * Get struct control_block_extended_exc_detail for CB.
+ */
+extern int gru_get_cb_exception_detail(void *cb,
+		       struct control_block_extended_exc_detail *excdet);
+
+#define GRU_EXC_STR_SIZE		256
+
+extern int gru_check_status_proc(void *cb);
+extern int gru_wait_proc(void *cb);
+extern void gru_wait_abort_proc(void *cb);
+
+/*
+ * Control block definition for checking status
+ */
+struct gru_control_block_status {
+	unsigned int	icmd		:1;
+	unsigned int	unused1		:31;
+	unsigned int	unused2		:24;
+	unsigned int	istatus		:2;
+	unsigned int	isubstatus	:4;
+	unsigned int	inused3		:2;
+};
+
+/* Get CB status */
+static inline int gru_get_cb_status(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+
+	return cbs->istatus;
+}
+
+/* Get CB message queue substatus */
+static inline int gru_get_cb_message_queue_substatus(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+
+	return cbs->isubstatus & CBSS_MSG_QUEUE_MASK;
+}
+
+/* Get CB substatus */
+static inline int gru_get_cb_substatus(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+
+	return cbs->isubstatus;
+}
+
+/* Check the status of a CB. If the CB is in UPM mode, call the
+ * OS to handle the UPM status.
+ * Returns the CB status field value (0 for normal completion)
+ */
+static inline int gru_check_status(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+	int ret = cbs->istatus;
+
+	if (ret == CBS_CALL_OS)
+		ret = gru_check_status_proc(cb);
+	return ret;
+}
+
+/* Wait for CB to complete.
+ * Returns the CB status field value (0 for normal completion)
+ */
+static inline int gru_wait(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+	int ret = cbs->istatus;;
+
+	if (ret != CBS_IDLE)
+		ret = gru_wait_proc(cb);
+	return ret;
+}
+
+/* Wait for CB to complete. Aborts program if error. (Note: error does NOT
+ * mean TLB mis - only fatal errors such as memory parity error or user
+ * bugs will cause termination.
+ */
+static inline void gru_wait_abort(void *cb)
+{
+	struct gru_control_block_status *cbs = (void *)cb;
+
+	if (cbs->istatus != CBS_IDLE)
+		gru_wait_abort_proc(cb);
+}
+
+
+/*
+ * Get a pointer to a control block
+ * 	gseg	- GSeg address returned from gru_get_thread_gru_segment()
+ * 	index	- index of desired CB
+ */
+static inline void *gru_get_cb_pointer(void *gseg,
+						      int index)
+{
+	return gseg + GRU_CB_BASE + index * GRU_HANDLE_STRIDE;
+}
+
+/*
+ * Get a pointer to a cacheline in the data segment portion of a GSeg
+ * 	gseg	- GSeg address returned from gru_get_thread_gru_segment()
+ * 	index	- index of desired cache line
+ */
+static inline void *gru_get_data_pointer(void *gseg, int index)
+{
+	return gseg + GRU_DS_BASE + index * GRU_CACHE_LINE_BYTES;
+}
+
+/*
+ * Convert a vaddr into the tri index within the GSEG
+ * 	vaddr		- virtual address of within gseg
+ */
+static inline int gru_get_tri(void *vaddr)
+{
+	return ((unsigned long)vaddr & (GRU_GSEG_PAGESIZE - 1)) - GRU_DS_BASE;
+}
+#endif		/* __GRU_INSTRUCTIONS_H__ */
diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c
new file mode 100644
index 0000000..3d33015
--- /dev/null
+++ b/drivers/misc/sgi-gru/grufault.c
@@ -0,0 +1,633 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              FAULT HANDLER FOR GRU DETECTED TLB MISSES
+ *
+ * This file contains code that handles TLB misses within the GRU.
+ * These misses are reported either via interrupts or user polling of
+ * the user CB.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include "gru.h"
+#include "grutables.h"
+#include "grulib.h"
+#include "gru_instructions.h"
+#include <asm/uv/uv_hub.h>
+
+/*
+ * Test if a physical address is a valid GRU GSEG address
+ */
+static inline int is_gru_paddr(unsigned long paddr)
+{
+	return paddr >= gru_start_paddr && paddr < gru_end_paddr;
+}
+
+/*
+ * Find the vma of a GRU segment. Caller must hold mmap_sem.
+ */
+struct vm_area_struct *gru_find_vma(unsigned long vaddr)
+{
+	struct vm_area_struct *vma;
+
+	vma = find_vma(current->mm, vaddr);
+	if (vma && vma->vm_start <= vaddr && vma->vm_ops == &gru_vm_ops)
+		return vma;
+	return NULL;
+}
+
+/*
+ * Find and lock the gts that contains the specified user vaddr.
+ *
+ * Returns:
+ * 	- *gts with the mmap_sem locked for read and the GTS locked.
+ *	- NULL if vaddr invalid OR is not a valid GSEG vaddr.
+ */
+
+static struct gru_thread_state *gru_find_lock_gts(unsigned long vaddr)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	struct gru_thread_state *gts = NULL;
+
+	down_read(&mm->mmap_sem);
+	vma = gru_find_vma(vaddr);
+	if (vma)
+		gts = gru_find_thread_state(vma, TSID(vaddr, vma));
+	if (gts)
+		mutex_lock(&gts->ts_ctxlock);
+	else
+		up_read(&mm->mmap_sem);
+	return gts;
+}
+
+static struct gru_thread_state *gru_alloc_locked_gts(unsigned long vaddr)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	struct gru_thread_state *gts = NULL;
+
+	down_write(&mm->mmap_sem);
+	vma = gru_find_vma(vaddr);
+	if (vma)
+		gts = gru_alloc_thread_state(vma, TSID(vaddr, vma));
+	if (gts) {
+		mutex_lock(&gts->ts_ctxlock);
+		downgrade_write(&mm->mmap_sem);
+	} else {
+		up_write(&mm->mmap_sem);
+	}
+
+	return gts;
+}
+
+/*
+ * Unlock a GTS that was previously locked with gru_find_lock_gts().
+ */
+static void gru_unlock_gts(struct gru_thread_state *gts)
+{
+	mutex_unlock(&gts->ts_ctxlock);
+	up_read(&current->mm->mmap_sem);
+}
+
+/*
+ * Set a CB.istatus to active using a user virtual address. This must be done
+ * just prior to a TFH RESTART. The new cb.istatus is an in-cache status ONLY.
+ * If the line is evicted, the status may be lost. The in-cache update
+ * is necessary to prevent the user from seeing a stale cb.istatus that will
+ * change as soon as the TFH restart is complete. Races may cause an
+ * occasional failure to clear the cb.istatus, but that is ok.
+ *
+ * If the cb address is not valid (should not happen, but...), nothing
+ * bad will happen.. The get_user()/put_user() will fail but there
+ * are no bad side-effects.
+ */
+static void gru_cb_set_istatus_active(unsigned long __user *cb)
+{
+	union {
+		struct gru_instruction_bits bits;
+		unsigned long dw;
+	} u;
+
+	if (cb) {
+		get_user(u.dw, cb);
+		u.bits.istatus = CBS_ACTIVE;
+		put_user(u.dw, cb);
+	}
+}
+
+/*
+ * Convert a interrupt IRQ to a pointer to the GRU GTS that caused the
+ * interrupt. Interrupts are always sent to a cpu on the blade that contains the
+ * GRU (except for headless blades which are not currently supported). A blade
+ * has N grus; a block of N consecutive IRQs is assigned to the GRUs. The IRQ
+ * number uniquely identifies the GRU chiplet on the local blade that caused the
+ * interrupt. Always called in interrupt context.
+ */
+static inline struct gru_state *irq_to_gru(int irq)
+{
+	return &gru_base[uv_numa_blade_id()]->bs_grus[irq - IRQ_GRU];
+}
+
+/*
+ * Read & clear a TFM
+ *
+ * The GRU has an array of fault maps. A map is private to a cpu
+ * Only one cpu will be accessing a cpu's fault map.
+ *
+ * This function scans the cpu-private fault map & clears all bits that
+ * are set. The function returns a bitmap that indicates the bits that
+ * were cleared. Note that sense the maps may be updated asynchronously by
+ * the GRU, atomic operations must be used to clear bits.
+ */
+static void get_clear_fault_map(struct gru_state *gru,
+				struct gru_tlb_fault_map *map)
+{
+	unsigned long i, k;
+	struct gru_tlb_fault_map *tfm;
+
+	tfm = get_tfm_for_cpu(gru, gru_cpu_fault_map_id());
+	prefetchw(tfm);		/* Helps on hardware, required for emulator */
+	for (i = 0; i < BITS_TO_LONGS(GRU_NUM_CBE); i++) {
+		k = tfm->fault_bits[i];
+		if (k)
+			k = xchg(&tfm->fault_bits[i], 0UL);
+		map->fault_bits[i] = k;
+	}
+
+	/*
+	 * Not functionally required but helps performance. (Required
+	 * on emulator)
+	 */
+	gru_flush_cache(tfm);
+}
+
+/*
+ * Atomic (interrupt context) & non-atomic (user context) functions to
+ * convert a vaddr into a physical address. The size of the page
+ * is returned in pageshift.
+ * 	returns:
+ * 		  0 - successful
+ * 		< 0 - error code
+ * 		  1 - (atomic only) try again in non-atomic context
+ */
+static int non_atomic_pte_lookup(struct vm_area_struct *vma,
+				 unsigned long vaddr, int write,
+				 unsigned long *paddr, int *pageshift)
+{
+	struct page *page;
+
+	/* ZZZ Need to handle HUGE pages */
+	if (is_vm_hugetlb_page(vma))
+		return -EFAULT;
+	*pageshift = PAGE_SHIFT;
+	if (get_user_pages
+	    (current, current->mm, vaddr, 1, write, 0, &page, NULL) <= 0)
+		return -EFAULT;
+	*paddr = page_to_phys(page);
+	put_page(page);
+	return 0;
+}
+
+/*
+ *
+ * atomic_pte_lookup
+ *
+ * Convert a user virtual address to a physical address
+ * Only supports Intel large pages (2MB only) on x86_64.
+ *	ZZZ - hugepage support is incomplete
+ */
+static int atomic_pte_lookup(struct vm_area_struct *vma, unsigned long vaddr,
+	int write, unsigned long *paddr, int *pageshift)
+{
+	pgd_t *pgdp;
+	pmd_t *pmdp;
+	pud_t *pudp;
+	pte_t pte;
+
+	WARN_ON(irqs_disabled());		/* ZZZ debug */
+
+	local_irq_disable();
+	pgdp = pgd_offset(vma->vm_mm, vaddr);
+	if (unlikely(pgd_none(*pgdp)))
+		goto err;
+
+	pudp = pud_offset(pgdp, vaddr);
+	if (unlikely(pud_none(*pudp)))
+		goto err;
+
+	pmdp = pmd_offset(pudp, vaddr);
+	if (unlikely(pmd_none(*pmdp)))
+		goto err;
+#ifdef CONFIG_X86_64
+	if (unlikely(pmd_large(*pmdp)))
+		pte = *(pte_t *) pmdp;
+	else
+#endif
+		pte = *pte_offset_kernel(pmdp, vaddr);
+
+	local_irq_enable();
+
+	if (unlikely(!pte_present(pte) ||
+		     (write && (!pte_write(pte) || !pte_dirty(pte)))))
+		return 1;
+
+	*paddr = pte_pfn(pte) << PAGE_SHIFT;
+	*pageshift = is_vm_hugetlb_page(vma) ? HPAGE_SHIFT : PAGE_SHIFT;
+	return 0;
+
+err:
+	local_irq_enable();
+	return 1;
+}
+
+/*
+ * Drop a TLB entry into the GRU. The fault is described by info in an TFH.
+ *	Input:
+ *		cb    Address of user CBR. Null if not running in user context
+ * 	Return:
+ * 		  0 = dropin, exception, or switch to UPM successful
+ * 		  1 = range invalidate active
+ * 		< 0 = error code
+ *
+ */
+static int gru_try_dropin(struct gru_thread_state *gts,
+			  struct gru_tlb_fault_handle *tfh,
+			  unsigned long __user *cb)
+{
+	struct mm_struct *mm = gts->ts_mm;
+	struct vm_area_struct *vma;
+	int pageshift, asid, write, ret;
+	unsigned long paddr, gpa, vaddr;
+
+	/*
+	 * NOTE: The GRU contains magic hardware that eliminates races between
+	 * TLB invalidates and TLB dropins. If an invalidate occurs
+	 * in the window between reading the TFH and the subsequent TLB dropin,
+	 * the dropin is ignored. This eliminates the need for additional locks.
+	 */
+
+	/*
+	 * Error if TFH state is IDLE or FMM mode & the user issuing a UPM call.
+	 * Might be a hardware race OR a stupid user. Ignore FMM because FMM
+	 * is a transient state.
+	 */
+	if (tfh->state == TFHSTATE_IDLE)
+		goto failidle;
+	if (tfh->state == TFHSTATE_MISS_FMM && cb)
+		goto failfmm;
+
+	write = (tfh->cause & TFHCAUSE_TLB_MOD) != 0;
+	vaddr = tfh->missvaddr;
+	asid = tfh->missasid;
+	if (asid == 0)
+		goto failnoasid;
+
+	rmb();	/* TFH must be cache resident before reading ms_range_active */
+
+	/*
+	 * TFH is cache resident - at least briefly. Fail the dropin
+	 * if a range invalidate is active.
+	 */
+	if (atomic_read(&gts->ts_gms->ms_range_active))
+		goto failactive;
+
+	vma = find_vma(mm, vaddr);
+	if (!vma)
+		goto failinval;
+
+	/*
+	 * Atomic lookup is faster & usually works even if called in non-atomic
+	 * context.
+	 */
+	ret = atomic_pte_lookup(vma, vaddr, write, &paddr, &pageshift);
+	if (ret) {
+		if (!cb)
+			goto failupm;
+		if (non_atomic_pte_lookup(vma, vaddr, write, &paddr,
+					  &pageshift))
+			goto failinval;
+	}
+	if (is_gru_paddr(paddr))
+		goto failinval;
+
+	paddr = paddr & ~((1UL << pageshift) - 1);
+	gpa = uv_soc_phys_ram_to_gpa(paddr);
+	gru_cb_set_istatus_active(cb);
+	tfh_write_restart(tfh, gpa, GAA_RAM, vaddr, asid, write,
+			  GRU_PAGESIZE(pageshift));
+	STAT(tlb_dropin);
+	gru_dbg(grudev,
+		"%s: tfh 0x%p, vaddr 0x%lx, asid 0x%x, ps %d, gpa 0x%lx\n",
+		ret ? "non-atomic" : "atomic", tfh, vaddr, asid,
+		pageshift, gpa);
+	return 0;
+
+failnoasid:
+	/* No asid (delayed unload). */
+	STAT(tlb_dropin_fail_no_asid);
+	gru_dbg(grudev, "FAILED no_asid tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr);
+	if (!cb)
+		tfh_user_polling_mode(tfh);
+	else
+		gru_flush_cache(tfh);
+	return -EAGAIN;
+
+failupm:
+	/* Atomic failure switch CBR to UPM */
+	tfh_user_polling_mode(tfh);
+	STAT(tlb_dropin_fail_upm);
+	gru_dbg(grudev, "FAILED upm tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr);
+	return 1;
+
+failfmm:
+	/* FMM state on UPM call */
+	STAT(tlb_dropin_fail_fmm);
+	gru_dbg(grudev, "FAILED fmm tfh: 0x%p, state %d\n", tfh, tfh->state);
+	return 0;
+
+failidle:
+	/* TFH was idle  - no miss pending */
+	gru_flush_cache(tfh);
+	if (cb)
+		gru_flush_cache(cb);
+	STAT(tlb_dropin_fail_idle);
+	gru_dbg(grudev, "FAILED idle tfh: 0x%p, state %d\n", tfh, tfh->state);
+	return 0;
+
+failinval:
+	/* All errors (atomic & non-atomic) switch CBR to EXCEPTION state */
+	tfh_exception(tfh);
+	STAT(tlb_dropin_fail_invalid);
+	gru_dbg(grudev, "FAILED inval tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr);
+	return -EFAULT;
+
+failactive:
+	/* Range invalidate active. Switch to UPM iff atomic */
+	if (!cb)
+		tfh_user_polling_mode(tfh);
+	else
+		gru_flush_cache(tfh);
+	STAT(tlb_dropin_fail_range_active);
+	gru_dbg(grudev, "FAILED range active: tfh 0x%p, vaddr 0x%lx\n",
+		tfh, vaddr);
+	return 1;
+}
+
+/*
+ * Process an external interrupt from the GRU. This interrupt is
+ * caused by a TLB miss.
+ * Note that this is the interrupt handler that is registered with linux
+ * interrupt handlers.
+ */
+irqreturn_t gru_intr(int irq, void *dev_id)
+{
+	struct gru_state *gru;
+	struct gru_tlb_fault_map map;
+	struct gru_thread_state *gts;
+	struct gru_tlb_fault_handle *tfh = NULL;
+	int cbrnum, ctxnum;
+
+	STAT(intr);
+
+	gru = irq_to_gru(irq);
+	if (!gru) {
+		dev_err(grudev, "GRU: invalid interrupt: cpu %d, irq %d\n",
+			raw_smp_processor_id(), irq);
+		return IRQ_NONE;
+	}
+	get_clear_fault_map(gru, &map);
+	gru_dbg(grudev, "irq %d, gru %x, map 0x%lx\n", irq, gru->gs_gid,
+		map.fault_bits[0]);
+
+	for_each_cbr_in_tfm(cbrnum, map.fault_bits) {
+		tfh = get_tfh_by_index(gru, cbrnum);
+		prefetchw(tfh);	/* Helps on hdw, required for emulator */
+
+		/*
+		 * When hardware sets a bit in the faultmap, it implicitly
+		 * locks the GRU context so that it cannot be unloaded.
+		 * The gts cannot change until a TFH start/writestart command
+		 * is issued.
+		 */
+		ctxnum = tfh->ctxnum;
+		gts = gru->gs_gts[ctxnum];
+
+		/*
+		 * This is running in interrupt context. Trylock the mmap_sem.
+		 * If it fails, retry the fault in user context.
+		 */
+		if (down_read_trylock(&gts->ts_mm->mmap_sem)) {
+			gru_try_dropin(gts, tfh, NULL);
+			up_read(&gts->ts_mm->mmap_sem);
+		} else {
+			tfh_user_polling_mode(tfh);
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+
+static int gru_user_dropin(struct gru_thread_state *gts,
+			   struct gru_tlb_fault_handle *tfh,
+			   unsigned long __user *cb)
+{
+	struct gru_mm_struct *gms = gts->ts_gms;
+	int ret;
+
+	while (1) {
+		wait_event(gms->ms_wait_queue,
+			   atomic_read(&gms->ms_range_active) == 0);
+		prefetchw(tfh);	/* Helps on hdw, required for emulator */
+		ret = gru_try_dropin(gts, tfh, cb);
+		if (ret <= 0)
+			return ret;
+		STAT(call_os_wait_queue);
+	}
+}
+
+/*
+ * This interface is called as a result of a user detecting a "call OS" bit
+ * in a user CB. Normally means that a TLB fault has occurred.
+ * 	cb - user virtual address of the CB
+ */
+int gru_handle_user_call_os(unsigned long cb)
+{
+	struct gru_tlb_fault_handle *tfh;
+	struct gru_thread_state *gts;
+	unsigned long __user *cbp;
+	int ucbnum, cbrnum, ret = -EINVAL;
+
+	STAT(call_os);
+	gru_dbg(grudev, "address 0x%lx\n", cb);
+
+	/* sanity check the cb pointer */
+	ucbnum = get_cb_number((void *)cb);
+	if ((cb & (GRU_HANDLE_STRIDE - 1)) || ucbnum >= GRU_NUM_CB)
+		return -EINVAL;
+	cbp = (unsigned long *)cb;
+
+	gts = gru_find_lock_gts(cb);
+	if (!gts)
+		return -EINVAL;
+
+	if (ucbnum >= gts->ts_cbr_au_count * GRU_CBR_AU_SIZE) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/*
+	 * If force_unload is set, the UPM TLB fault is phony. The task
+	 * has migrated to another node and the GSEG must be moved. Just
+	 * unload the context. The task will page fault and assign a new
+	 * context.
+	 */
+	ret = -EAGAIN;
+	cbrnum = thread_cbr_number(gts, ucbnum);
+	if (gts->ts_force_unload) {
+		gru_unload_context(gts, 1);
+	} else if (gts->ts_gru) {
+		tfh = get_tfh_by_index(gts->ts_gru, cbrnum);
+		ret = gru_user_dropin(gts, tfh, cbp);
+	}
+exit:
+	gru_unlock_gts(gts);
+	return ret;
+}
+
+/*
+ * Fetch the exception detail information for a CB that terminated with
+ * an exception.
+ */
+int gru_get_exception_detail(unsigned long arg)
+{
+	struct control_block_extended_exc_detail excdet;
+	struct gru_control_block_extended *cbe;
+	struct gru_thread_state *gts;
+	int ucbnum, cbrnum, ret;
+
+	STAT(user_exception);
+	if (copy_from_user(&excdet, (void __user *)arg, sizeof(excdet)))
+		return -EFAULT;
+
+	gru_dbg(grudev, "address 0x%lx\n", excdet.cb);
+	gts = gru_find_lock_gts(excdet.cb);
+	if (!gts)
+		return -EINVAL;
+
+	if (gts->ts_gru) {
+		ucbnum = get_cb_number((void *)excdet.cb);
+		cbrnum = thread_cbr_number(gts, ucbnum);
+		cbe = get_cbe_by_index(gts->ts_gru, cbrnum);
+		excdet.opc = cbe->opccpy;
+		excdet.exopc = cbe->exopccpy;
+		excdet.ecause = cbe->ecause;
+		excdet.exceptdet0 = cbe->idef1upd;
+		excdet.exceptdet1 = cbe->idef3upd;
+		ret = 0;
+	} else {
+		ret = -EAGAIN;
+	}
+	gru_unlock_gts(gts);
+
+	gru_dbg(grudev, "address 0x%lx, ecause 0x%x\n", excdet.cb,
+		excdet.ecause);
+	if (!ret && copy_to_user((void __user *)arg, &excdet, sizeof(excdet)))
+		ret = -EFAULT;
+	return ret;
+}
+
+/*
+ * User request to unload a context. Content is saved for possible reload.
+ */
+int gru_user_unload_context(unsigned long arg)
+{
+	struct gru_thread_state *gts;
+	struct gru_unload_context_req req;
+
+	STAT(user_unload_context);
+	if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+		return -EFAULT;
+
+	gru_dbg(grudev, "gseg 0x%lx\n", req.gseg);
+
+	gts = gru_find_lock_gts(req.gseg);
+	if (!gts)
+		return -EINVAL;
+
+	if (gts->ts_gru)
+		gru_unload_context(gts, 1);
+	gru_unlock_gts(gts);
+
+	return 0;
+}
+
+/*
+ * User request to flush a range of virtual addresses from the GRU TLB
+ * (Mainly for testing).
+ */
+int gru_user_flush_tlb(unsigned long arg)
+{
+	struct gru_thread_state *gts;
+	struct gru_flush_tlb_req req;
+
+	STAT(user_flush_tlb);
+	if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+		return -EFAULT;
+
+	gru_dbg(grudev, "gseg 0x%lx, vaddr 0x%lx, len 0x%lx\n", req.gseg,
+		req.vaddr, req.len);
+
+	gts = gru_find_lock_gts(req.gseg);
+	if (!gts)
+		return -EINVAL;
+
+	gru_flush_tlb_range(gts->ts_gms, req.vaddr, req.vaddr + req.len);
+	gru_unlock_gts(gts);
+
+	return 0;
+}
+
+/*
+ * Register the current task as the user of the GSEG slice.
+ * Needed for TLB fault interrupt targeting.
+ */
+int gru_set_task_slice(long address)
+{
+	struct gru_thread_state *gts;
+
+	STAT(set_task_slice);
+	gru_dbg(grudev, "address 0x%lx\n", address);
+	gts = gru_alloc_locked_gts(address);
+	if (!gts)
+		return -EINVAL;
+
+	gts->ts_tgid_owner = current->tgid;
+	gru_unlock_gts(gts);
+
+	return 0;
+}
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
new file mode 100644
index 0000000..23c91f5
--- /dev/null
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -0,0 +1,485 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              FILE OPERATIONS & DRIVER INITIALIZATION
+ *
+ * This file supports the user system call for file open, close, mmap, etc.
+ * This also incudes the driver initialization code.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+#include "gru.h"
+#include "grulib.h"
+#include "grutables.h"
+
+#if defined CONFIG_X86_64
+#include <asm/genapic.h>
+#include <asm/irq.h>
+#define IS_UV()		is_uv_system()
+#elif defined CONFIG_IA64
+#include <asm/system.h>
+#include <asm/sn/simulator.h>
+/* temp support for running on hardware simulator */
+#define IS_UV()		IS_MEDUSA() || ia64_platform_is("uv")
+#else
+#define IS_UV()		0
+#endif
+
+#include <asm/uv/uv_hub.h>
+#include <asm/uv/uv_mmrs.h>
+
+struct gru_blade_state *gru_base[GRU_MAX_BLADES] __read_mostly;
+unsigned long gru_start_paddr, gru_end_paddr __read_mostly;
+struct gru_stats_s gru_stats;
+
+/* Guaranteed user available resources on each node */
+static int max_user_cbrs, max_user_dsr_bytes;
+
+static struct file_operations gru_fops;
+static struct miscdevice gru_miscdev;
+
+
+/*
+ * gru_vma_close
+ *
+ * Called when unmapping a device mapping. Frees all gru resources
+ * and tables belonging to the vma.
+ */
+static void gru_vma_close(struct vm_area_struct *vma)
+{
+	struct gru_vma_data *vdata;
+	struct gru_thread_state *gts;
+	struct list_head *entry, *next;
+
+	if (!vma->vm_private_data)
+		return;
+
+	vdata = vma->vm_private_data;
+	vma->vm_private_data = NULL;
+	gru_dbg(grudev, "vma %p, file %p, vdata %p\n", vma, vma->vm_file,
+				vdata);
+	list_for_each_safe(entry, next, &vdata->vd_head) {
+		gts =
+		    list_entry(entry, struct gru_thread_state, ts_next);
+		list_del(&gts->ts_next);
+		mutex_lock(&gts->ts_ctxlock);
+		if (gts->ts_gru)
+			gru_unload_context(gts, 0);
+		mutex_unlock(&gts->ts_ctxlock);
+		gts_drop(gts);
+	}
+	kfree(vdata);
+	STAT(vdata_free);
+}
+
+/*
+ * gru_file_mmap
+ *
+ * Called when mmaping the device.  Initializes the vma with a fault handler
+ * and private data structure necessary to allocate, track, and free the
+ * underlying pages.
+ */
+static int gru_file_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	if ((vma->vm_flags & (VM_SHARED | VM_WRITE)) != (VM_SHARED | VM_WRITE))
+		return -EPERM;
+
+	if (vma->vm_start & (GRU_GSEG_PAGESIZE - 1) ||
+			vma->vm_end & (GRU_GSEG_PAGESIZE - 1))
+		return -EINVAL;
+
+	vma->vm_flags |=
+	    (VM_IO | VM_DONTCOPY | VM_LOCKED | VM_DONTEXPAND | VM_PFNMAP |
+			VM_RESERVED);
+	vma->vm_page_prot = PAGE_SHARED;
+	vma->vm_ops = &gru_vm_ops;
+
+	vma->vm_private_data = gru_alloc_vma_data(vma, 0);
+	if (!vma->vm_private_data)
+		return -ENOMEM;
+
+	gru_dbg(grudev, "file %p, vaddr 0x%lx, vma %p, vdata %p\n",
+		file, vma->vm_start, vma, vma->vm_private_data);
+	return 0;
+}
+
+/*
+ * Create a new GRU context
+ */
+static int gru_create_new_context(unsigned long arg)
+{
+	struct gru_create_context_req req;
+	struct vm_area_struct *vma;
+	struct gru_vma_data *vdata;
+	int ret = -EINVAL;
+
+
+	if (copy_from_user(&req, (void __user *)arg, sizeof(req)))
+		return -EFAULT;
+
+	if (req.data_segment_bytes == 0 ||
+				req.data_segment_bytes > max_user_dsr_bytes)
+		return -EINVAL;
+	if (!req.control_blocks || !req.maximum_thread_count ||
+				req.control_blocks > max_user_cbrs)
+		return -EINVAL;
+
+	if (!(req.options & GRU_OPT_MISS_MASK))
+		req.options |= GRU_OPT_MISS_FMM_INTR;
+
+	down_write(&current->mm->mmap_sem);
+	vma = gru_find_vma(req.gseg);
+	if (vma) {
+		vdata = vma->vm_private_data;
+		vdata->vd_user_options = req.options;
+		vdata->vd_dsr_au_count =
+		    GRU_DS_BYTES_TO_AU(req.data_segment_bytes);
+		vdata->vd_cbr_au_count = GRU_CB_COUNT_TO_AU(req.control_blocks);
+		ret = 0;
+	}
+	up_write(&current->mm->mmap_sem);
+
+	return ret;
+}
+
+/*
+ * Get GRU configuration info (temp - for emulator testing)
+ */
+static long gru_get_config_info(unsigned long arg)
+{
+	struct gru_config_info info;
+	int nodesperblade;
+
+	if (num_online_nodes() > 1 &&
+			(uv_node_to_blade_id(1) == uv_node_to_blade_id(0)))
+		nodesperblade = 2;
+	else
+		nodesperblade = 1;
+	info.cpus = num_online_cpus();
+	info.nodes = num_online_nodes();
+	info.blades = info.nodes / nodesperblade;
+	info.chiplets = GRU_CHIPLETS_PER_BLADE * info.blades;
+
+	if (copy_to_user((void __user *)arg, &info, sizeof(info)))
+		return -EFAULT;
+	return 0;
+}
+
+/*
+ * Get GRU chiplet status
+ */
+static long gru_get_chiplet_status(unsigned long arg)
+{
+	struct gru_state *gru;
+	struct gru_chiplet_info info;
+
+	if (copy_from_user(&info, (void __user *)arg, sizeof(info)))
+		return -EFAULT;
+
+	if (info.node == -1)
+		info.node = numa_node_id();
+	if (info.node >= num_possible_nodes() ||
+			info.chiplet >= GRU_CHIPLETS_PER_HUB ||
+			info.node < 0 || info.chiplet < 0)
+		return -EINVAL;
+
+	info.blade = uv_node_to_blade_id(info.node);
+	gru = get_gru(info.blade, info.chiplet);
+
+	info.total_dsr_bytes = GRU_NUM_DSR_BYTES;
+	info.total_cbr = GRU_NUM_CB;
+	info.total_user_dsr_bytes = GRU_NUM_DSR_BYTES -
+		gru->gs_reserved_dsr_bytes;
+	info.total_user_cbr = GRU_NUM_CB - gru->gs_reserved_cbrs;
+	info.free_user_dsr_bytes = hweight64(gru->gs_dsr_map) *
+			GRU_DSR_AU_BYTES;
+	info.free_user_cbr = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE;
+
+	if (copy_to_user((void __user *)arg, &info, sizeof(info)))
+		return -EFAULT;
+	return 0;
+}
+
+/*
+ * gru_file_unlocked_ioctl
+ *
+ * Called to update file attributes via IOCTL calls.
+ */
+static long gru_file_unlocked_ioctl(struct file *file, unsigned int req,
+				    unsigned long arg)
+{
+	int err = -EBADRQC;
+
+	gru_dbg(grudev, "file %p\n", file);
+
+	switch (req) {
+	case GRU_CREATE_CONTEXT:
+		err = gru_create_new_context(arg);
+		break;
+	case GRU_SET_TASK_SLICE:
+		err = gru_set_task_slice(arg);
+		break;
+	case GRU_USER_GET_EXCEPTION_DETAIL:
+		err = gru_get_exception_detail(arg);
+		break;
+	case GRU_USER_UNLOAD_CONTEXT:
+		err = gru_user_unload_context(arg);
+		break;
+	case GRU_GET_CHIPLET_STATUS:
+		err = gru_get_chiplet_status(arg);
+		break;
+	case GRU_USER_FLUSH_TLB:
+		err = gru_user_flush_tlb(arg);
+		break;
+	case GRU_USER_CALL_OS:
+		err = gru_handle_user_call_os(arg);
+		break;
+	case GRU_GET_CONFIG_INFO:
+		err = gru_get_config_info(arg);
+		break;
+	}
+	return err;
+}
+
+/*
+ * Called at init time to build tables for all GRUs that are present in the
+ * system.
+ */
+static void gru_init_chiplet(struct gru_state *gru, unsigned long paddr,
+			     void *vaddr, int nid, int bid, int grunum)
+{
+	spin_lock_init(&gru->gs_lock);
+	spin_lock_init(&gru->gs_asid_lock);
+	gru->gs_gru_base_paddr = paddr;
+	gru->gs_gru_base_vaddr = vaddr;
+	gru->gs_gid = bid * GRU_CHIPLETS_PER_BLADE + grunum;
+	gru->gs_blade = gru_base[bid];
+	gru->gs_blade_id = bid;
+	gru->gs_cbr_map = (GRU_CBR_AU == 64) ? ~0 : (1UL << GRU_CBR_AU) - 1;
+	gru->gs_dsr_map = (1UL << GRU_DSR_AU) - 1;
+	gru_tgh_flush_init(gru);
+	gru_dbg(grudev, "bid %d, nid %d, gru %x, vaddr %p (0x%lx)\n",
+		bid, nid, gru->gs_gid, gru->gs_gru_base_vaddr,
+		gru->gs_gru_base_paddr);
+	gru_kservices_init(gru);
+}
+
+static int gru_init_tables(unsigned long gru_base_paddr, void *gru_base_vaddr)
+{
+	int pnode, nid, bid, chip;
+	int cbrs, dsrbytes, n;
+	int order = get_order(sizeof(struct gru_blade_state));
+	struct page *page;
+	struct gru_state *gru;
+	unsigned long paddr;
+	void *vaddr;
+
+	max_user_cbrs = GRU_NUM_CB;
+	max_user_dsr_bytes = GRU_NUM_DSR_BYTES;
+	for_each_online_node(nid) {
+		bid = uv_node_to_blade_id(nid);
+		pnode = uv_node_to_pnode(nid);
+		if (gru_base[bid])
+			continue;
+		page = alloc_pages_node(nid, GFP_KERNEL, order);
+		if (!page)
+			goto fail;
+		gru_base[bid] = page_address(page);
+		memset(gru_base[bid], 0, sizeof(struct gru_blade_state));
+		gru_base[bid]->bs_lru_gru = &gru_base[bid]->bs_grus[0];
+		spin_lock_init(&gru_base[bid]->bs_lock);
+
+		dsrbytes = 0;
+		cbrs = 0;
+		for (gru = gru_base[bid]->bs_grus, chip = 0;
+		     		chip < GRU_CHIPLETS_PER_BLADE;
+				chip++, gru++) {
+			paddr = gru_chiplet_paddr(gru_base_paddr, pnode, chip);
+			vaddr = gru_chiplet_vaddr(gru_base_vaddr, pnode, chip);
+			gru_init_chiplet(gru, paddr, vaddr, bid, nid, chip);
+			n = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE;
+			cbrs = max(cbrs, n);
+			n = hweight64(gru->gs_dsr_map) * GRU_DSR_AU_BYTES;
+			dsrbytes = max(dsrbytes, n);
+		}
+		max_user_cbrs = min(max_user_cbrs, cbrs);
+		max_user_dsr_bytes = min(max_user_dsr_bytes, dsrbytes);
+	}
+
+	return 0;
+
+fail:
+	for (nid--; nid >= 0; nid--)
+		free_pages((unsigned long)gru_base[nid], order);
+	return -ENOMEM;
+}
+
+#ifdef CONFIG_IA64
+
+static int get_base_irq(void)
+{
+	return IRQ_GRU;
+}
+
+#elif defined CONFIG_X86_64
+
+static void noop(unsigned int irq)
+{
+}
+
+static struct irq_chip gru_chip = {
+	.name		= "gru",
+	.mask		= noop,
+	.unmask		= noop,
+	.ack		= noop,
+};
+
+static int get_base_irq(void)
+{
+	set_irq_chip(IRQ_GRU, &gru_chip);
+	set_irq_chip(IRQ_GRU + 1, &gru_chip);
+	return IRQ_GRU;
+}
+#endif
+
+/*
+ * gru_init
+ *
+ * Called at boot or module load time to initialize the GRUs.
+ */
+static int __init gru_init(void)
+{
+	int ret, irq, chip;
+	char id[10];
+	void *gru_start_vaddr;
+
+	if (!IS_UV())
+		return 0;
+
+#if defined CONFIG_IA64
+	gru_start_paddr = 0xd000000000UL; /* ZZZZZZZZZZZZZZZZZZZ fixme */
+#else
+	gru_start_paddr = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR) &
+				0x7fffffffffffUL;
+
+#endif
+	gru_start_vaddr = __va(gru_start_paddr);
+	gru_end_paddr = gru_start_paddr + MAX_NUMNODES * GRU_SIZE;
+	printk(KERN_INFO "GRU space: 0x%lx - 0x%lx\n",
+	       gru_start_paddr, gru_end_paddr);
+	irq = get_base_irq();
+	for (chip = 0; chip < GRU_CHIPLETS_PER_BLADE; chip++) {
+		ret = request_irq(irq + chip, gru_intr, 0, id, NULL);
+		if (ret) {
+			printk(KERN_ERR "%s: request_irq failed\n",
+			       GRU_DRIVER_ID_STR);
+			goto exit1;
+		}
+	}
+
+	ret = misc_register(&gru_miscdev);
+	if (ret) {
+		printk(KERN_ERR "%s: misc_register failed\n",
+		       GRU_DRIVER_ID_STR);
+		goto exit1;
+	}
+
+	ret = gru_proc_init();
+	if (ret) {
+		printk(KERN_ERR "%s: proc init failed\n", GRU_DRIVER_ID_STR);
+		goto exit2;
+	}
+
+	ret = gru_init_tables(gru_start_paddr, gru_start_vaddr);
+	if (ret) {
+		printk(KERN_ERR "%s: init tables failed\n", GRU_DRIVER_ID_STR);
+		goto exit3;
+	}
+
+	printk(KERN_INFO "%s: v%s\n", GRU_DRIVER_ID_STR,
+	       GRU_DRIVER_VERSION_STR);
+	return 0;
+
+exit3:
+	gru_proc_exit();
+exit2:
+	misc_deregister(&gru_miscdev);
+exit1:
+	for (--chip; chip >= 0; chip--)
+		free_irq(irq + chip, NULL);
+	return ret;
+
+}
+
+static void __exit gru_exit(void)
+{
+	int i, bid;
+	int order = get_order(sizeof(struct gru_state) *
+			      GRU_CHIPLETS_PER_BLADE);
+
+	for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++)
+		free_irq(IRQ_GRU + i, NULL);
+
+	for (bid = 0; bid < GRU_MAX_BLADES; bid++)
+		free_pages((unsigned long)gru_base[bid], order);
+
+	misc_deregister(&gru_miscdev);
+	gru_proc_exit();
+}
+
+static struct file_operations gru_fops = {
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= gru_file_unlocked_ioctl,
+	.mmap		= gru_file_mmap,
+};
+
+static struct miscdevice gru_miscdev = {
+	.minor		= MISC_DYNAMIC_MINOR,
+	.name		= "gru",
+	.fops		= &gru_fops,
+};
+
+struct vm_operations_struct gru_vm_ops = {
+	.close		= gru_vma_close,
+	.fault		= gru_fault,
+};
+
+module_init(gru_init);
+module_exit(gru_exit);
+
+module_param(gru_options, ulong, 0644);
+MODULE_PARM_DESC(gru_options, "Various debug options");
+
+MODULE_AUTHOR("Silicon Graphics, Inc.");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(GRU_DRIVER_ID_STR GRU_DRIVER_VERSION_STR);
+MODULE_VERSION(GRU_DRIVER_VERSION_STR);
+
diff --git a/drivers/misc/sgi-gru/gruhandles.h b/drivers/misc/sgi-gru/gruhandles.h
new file mode 100644
index 0000000..d16031d
--- /dev/null
+++ b/drivers/misc/sgi-gru/gruhandles.h
@@ -0,0 +1,663 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              GRU HANDLE DEFINITION
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRUHANDLES_H__
+#define __GRUHANDLES_H__
+#include "gru_instructions.h"
+
+/*
+ * Manifest constants for GRU Memory Map
+ */
+#define GRU_GSEG0_BASE		0
+#define GRU_MCS_BASE		(64 * 1024 * 1024)
+#define GRU_SIZE		(128UL * 1024 * 1024)
+
+/* Handle & resource counts */
+#define GRU_NUM_CB		128
+#define GRU_NUM_DSR_BYTES	(32 * 1024)
+#define GRU_NUM_TFM		16
+#define GRU_NUM_TGH		24
+#define GRU_NUM_CBE		128
+#define GRU_NUM_TFH		128
+#define GRU_NUM_CCH		16
+#define GRU_NUM_GSH		1
+
+/* Maximum resource counts that can be reserved by user programs */
+#define GRU_NUM_USER_CBR	GRU_NUM_CBE
+#define GRU_NUM_USER_DSR_BYTES	GRU_NUM_DSR_BYTES
+
+/* Bytes per handle & handle stride. Code assumes all cb, tfh, cbe handles
+ * are the same */
+#define GRU_HANDLE_BYTES	64
+#define GRU_HANDLE_STRIDE	256
+
+/* Base addresses of handles */
+#define GRU_TFM_BASE		(GRU_MCS_BASE + 0x00000)
+#define GRU_TGH_BASE		(GRU_MCS_BASE + 0x08000)
+#define GRU_CBE_BASE		(GRU_MCS_BASE + 0x10000)
+#define GRU_TFH_BASE		(GRU_MCS_BASE + 0x18000)
+#define GRU_CCH_BASE		(GRU_MCS_BASE + 0x20000)
+#define GRU_GSH_BASE		(GRU_MCS_BASE + 0x30000)
+
+/* User gseg constants */
+#define GRU_GSEG_STRIDE		(4 * 1024 * 1024)
+#define GSEG_BASE(a)		((a) & ~(GRU_GSEG_PAGESIZE - 1))
+
+/* Data segment constants */
+#define GRU_DSR_AU_BYTES	1024
+#define GRU_DSR_CL		(GRU_NUM_DSR_BYTES / GRU_CACHE_LINE_BYTES)
+#define GRU_DSR_AU_CL		(GRU_DSR_AU_BYTES / GRU_CACHE_LINE_BYTES)
+#define GRU_DSR_AU		(GRU_NUM_DSR_BYTES / GRU_DSR_AU_BYTES)
+
+/* Control block constants */
+#define GRU_CBR_AU_SIZE		2
+#define GRU_CBR_AU		(GRU_NUM_CBE / GRU_CBR_AU_SIZE)
+
+/* Convert resource counts to the number of AU */
+#define GRU_DS_BYTES_TO_AU(n)	DIV_ROUND_UP(n, GRU_DSR_AU_BYTES)
+#define GRU_CB_COUNT_TO_AU(n)	DIV_ROUND_UP(n, GRU_CBR_AU_SIZE)
+
+/* UV limits */
+#define GRU_CHIPLETS_PER_HUB	2
+#define GRU_HUBS_PER_BLADE	1
+#define GRU_CHIPLETS_PER_BLADE	(GRU_HUBS_PER_BLADE * GRU_CHIPLETS_PER_HUB)
+
+/* User GRU Gseg offsets */
+#define GRU_CB_BASE		0
+#define GRU_CB_LIMIT		(GRU_CB_BASE + GRU_HANDLE_STRIDE * GRU_NUM_CBE)
+#define GRU_DS_BASE		0x20000
+#define GRU_DS_LIMIT		(GRU_DS_BASE + GRU_NUM_DSR_BYTES)
+
+/* Convert a GRU physical address to the chiplet offset */
+#define GSEGPOFF(h) 		((h) & (GRU_SIZE - 1))
+
+/* Convert an arbitrary handle address to the beginning of the GRU segment */
+#ifndef __PLUGIN__
+#define GRUBASE(h)		((void *)((unsigned long)(h) & ~(GRU_SIZE - 1)))
+#else
+extern void *gmu_grubase(void *h);
+#define GRUBASE(h)		gmu_grubase(h)
+#endif
+
+/* General addressing macros. */
+static inline void *get_gseg_base_address(void *base, int ctxnum)
+{
+	return (void *)(base + GRU_GSEG0_BASE + GRU_GSEG_STRIDE * ctxnum);
+}
+
+static inline void *get_gseg_base_address_cb(void *base, int ctxnum, int line)
+{
+	return (void *)(get_gseg_base_address(base, ctxnum) +
+			GRU_CB_BASE + GRU_HANDLE_STRIDE * line);
+}
+
+static inline void *get_gseg_base_address_ds(void *base, int ctxnum, int line)
+{
+	return (void *)(get_gseg_base_address(base, ctxnum) + GRU_DS_BASE +
+			GRU_CACHE_LINE_BYTES * line);
+}
+
+static inline struct gru_tlb_fault_map *get_tfm(void *base, int ctxnum)
+{
+	return (struct gru_tlb_fault_map *)(base + GRU_TFM_BASE +
+					ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_tlb_global_handle *get_tgh(void *base, int ctxnum)
+{
+	return (struct gru_tlb_global_handle *)(base + GRU_TGH_BASE +
+					ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_control_block_extended *get_cbe(void *base, int ctxnum)
+{
+	return (struct gru_control_block_extended *)(base + GRU_CBE_BASE +
+					ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_tlb_fault_handle *get_tfh(void *base, int ctxnum)
+{
+	return (struct gru_tlb_fault_handle *)(base + GRU_TFH_BASE +
+					ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline struct gru_context_configuration_handle *get_cch(void *base,
+					int ctxnum)
+{
+	return (struct gru_context_configuration_handle *)(base +
+				GRU_CCH_BASE + ctxnum * GRU_HANDLE_STRIDE);
+}
+
+static inline unsigned long get_cb_number(void *cb)
+{
+	return (((unsigned long)cb - GRU_CB_BASE) % GRU_GSEG_PAGESIZE) /
+					GRU_HANDLE_STRIDE;
+}
+
+/* byte offset to a specific GRU chiplet. (p=pnode, c=chiplet (0 or 1)*/
+static inline unsigned long gru_chiplet_paddr(unsigned long paddr, int pnode,
+							int chiplet)
+{
+	return paddr + GRU_SIZE * (2 * pnode  + chiplet);
+}
+
+static inline void *gru_chiplet_vaddr(void *vaddr, int pnode, int chiplet)
+{
+	return vaddr + GRU_SIZE * (2 * pnode  + chiplet);
+}
+
+
+
+/*
+ * Global TLB Fault Map
+ * 	Bitmap of outstanding TLB misses needing interrupt/polling service.
+ *
+ */
+struct gru_tlb_fault_map {
+	unsigned long fault_bits[BITS_TO_LONGS(GRU_NUM_CBE)];
+	unsigned long fill0[2];
+	unsigned long done_bits[BITS_TO_LONGS(GRU_NUM_CBE)];
+	unsigned long fill1[2];
+};
+
+/*
+ * TGH - TLB Global Handle
+ * 	Used for TLB flushing.
+ *
+ */
+struct gru_tlb_global_handle {
+	unsigned int cmd:1;		/* DW 0 */
+	unsigned int delresp:1;
+	unsigned int opc:1;
+	unsigned int fill1:5;
+
+	unsigned int fill2:8;
+
+	unsigned int status:2;
+	unsigned long fill3:2;
+	unsigned int state:3;
+	unsigned long fill4:1;
+
+	unsigned int cause:3;
+	unsigned long fill5:37;
+
+	unsigned long vaddr:64;		/* DW 1 */
+
+	unsigned int asid:24;		/* DW 2 */
+	unsigned int fill6:8;
+
+	unsigned int pagesize:5;
+	unsigned int fill7:11;
+
+	unsigned int global:1;
+	unsigned int fill8:15;
+
+	unsigned long vaddrmask:39;	/* DW 3 */
+	unsigned int fill9:9;
+	unsigned int n:10;
+	unsigned int fill10:6;
+
+	unsigned int ctxbitmap:16;	/* DW4 */
+	unsigned long fill11[3];
+};
+
+enum gru_tgh_cmd {
+	TGHCMD_START
+};
+
+enum gru_tgh_opc {
+	TGHOP_TLBNOP,
+	TGHOP_TLBINV
+};
+
+enum gru_tgh_status {
+	TGHSTATUS_IDLE,
+	TGHSTATUS_EXCEPTION,
+	TGHSTATUS_ACTIVE
+};
+
+enum gru_tgh_state {
+	TGHSTATE_IDLE,
+	TGHSTATE_PE_INVAL,
+	TGHSTATE_INTERRUPT_INVAL,
+	TGHSTATE_WAITDONE,
+	TGHSTATE_RESTART_CTX,
+};
+
+/*
+ * TFH - TLB Global Handle
+ * 	Used for TLB dropins into the GRU TLB.
+ *
+ */
+struct gru_tlb_fault_handle {
+	unsigned int cmd:1;		/* DW 0 - low 32*/
+	unsigned int delresp:1;
+	unsigned int fill0:2;
+	unsigned int opc:3;
+	unsigned int fill1:9;
+
+	unsigned int status:2;
+	unsigned int fill2:1;
+	unsigned int color:1;
+	unsigned int state:3;
+	unsigned int fill3:1;
+
+	unsigned int cause:7;		/* DW 0 - high 32 */
+	unsigned int fill4:1;
+
+	unsigned int indexway:12;
+	unsigned int fill5:4;
+
+	unsigned int ctxnum:4;
+	unsigned int fill6:12;
+
+	unsigned long missvaddr:64;	/* DW 1 */
+
+	unsigned int missasid:24;	/* DW 2 */
+	unsigned int fill7:8;
+	unsigned int fillasid:24;
+	unsigned int dirty:1;
+	unsigned int gaa:2;
+	unsigned long fill8:5;
+
+	unsigned long pfn:41;		/* DW 3 */
+	unsigned int fill9:7;
+	unsigned int pagesize:5;
+	unsigned int fill10:11;
+
+	unsigned long fillvaddr:64;	/* DW 4 */
+
+	unsigned long fill11[3];
+};
+
+enum gru_tfh_opc {
+	TFHOP_NOOP,
+	TFHOP_RESTART,
+	TFHOP_WRITE_ONLY,
+	TFHOP_WRITE_RESTART,
+	TFHOP_EXCEPTION,
+	TFHOP_USER_POLLING_MODE = 7,
+};
+
+enum tfh_status {
+	TFHSTATUS_IDLE,
+	TFHSTATUS_EXCEPTION,
+	TFHSTATUS_ACTIVE,
+};
+
+enum tfh_state {
+	TFHSTATE_INACTIVE,
+	TFHSTATE_IDLE,
+	TFHSTATE_MISS_UPM,
+	TFHSTATE_MISS_FMM,
+	TFHSTATE_HW_ERR,
+	TFHSTATE_WRITE_TLB,
+	TFHSTATE_RESTART_CBR,
+};
+
+/* TFH cause bits */
+enum tfh_cause {
+	TFHCAUSE_NONE,
+	TFHCAUSE_TLB_MISS,
+	TFHCAUSE_TLB_MOD,
+	TFHCAUSE_HW_ERROR_RR,
+	TFHCAUSE_HW_ERROR_MAIN_ARRAY,
+	TFHCAUSE_HW_ERROR_VALID,
+	TFHCAUSE_HW_ERROR_PAGESIZE,
+	TFHCAUSE_INSTRUCTION_EXCEPTION,
+	TFHCAUSE_UNCORRECTIBLE_ERROR,
+};
+
+/* GAA values */
+#define GAA_RAM				0x0
+#define GAA_NCRAM			0x2
+#define GAA_MMIO			0x1
+#define GAA_REGISTER			0x3
+
+/* GRU paddr shift for pfn. (NOTE: shift is NOT by actual pagesize) */
+#define GRU_PADDR_SHIFT			12
+
+/*
+ * Context Configuration handle
+ * 	Used to allocate resources to a GSEG context.
+ *
+ */
+struct gru_context_configuration_handle {
+	unsigned int cmd:1;			/* DW0 */
+	unsigned int delresp:1;
+	unsigned int opc:3;
+	unsigned int unmap_enable:1;
+	unsigned int req_slice_set_enable:1;
+	unsigned int req_slice:2;
+	unsigned int cb_int_enable:1;
+	unsigned int tlb_int_enable:1;
+	unsigned int tfm_fault_bit_enable:1;
+	unsigned int tlb_int_select:4;
+
+	unsigned int status:2;
+	unsigned int state:2;
+	unsigned int reserved2:4;
+
+	unsigned int cause:4;
+	unsigned int tfm_done_bit_enable:1;
+	unsigned int unused:3;
+
+	unsigned int dsr_allocation_map;
+
+	unsigned long cbr_allocation_map;	/* DW1 */
+
+	unsigned int asid[8];			/* DW 2 - 5 */
+	unsigned short sizeavail[8];		/* DW 6 - 7 */
+} __attribute__ ((packed));
+
+enum gru_cch_opc {
+	CCHOP_START = 1,
+	CCHOP_ALLOCATE,
+	CCHOP_INTERRUPT,
+	CCHOP_DEALLOCATE,
+	CCHOP_INTERRUPT_SYNC,
+};
+
+enum gru_cch_status {
+	CCHSTATUS_IDLE,
+	CCHSTATUS_EXCEPTION,
+	CCHSTATUS_ACTIVE,
+};
+
+enum gru_cch_state {
+	CCHSTATE_INACTIVE,
+	CCHSTATE_MAPPED,
+	CCHSTATE_ACTIVE,
+	CCHSTATE_INTERRUPTED,
+};
+
+/* CCH Exception cause */
+enum gru_cch_cause {
+	CCHCAUSE_REGION_REGISTER_WRITE_ERROR = 1,
+	CCHCAUSE_ILLEGAL_OPCODE = 2,
+	CCHCAUSE_INVALID_START_REQUEST = 3,
+	CCHCAUSE_INVALID_ALLOCATION_REQUEST = 4,
+	CCHCAUSE_INVALID_DEALLOCATION_REQUEST = 5,
+	CCHCAUSE_INVALID_INTERRUPT_REQUEST = 6,
+	CCHCAUSE_CCH_BUSY = 7,
+	CCHCAUSE_NO_CBRS_TO_ALLOCATE = 8,
+	CCHCAUSE_BAD_TFM_CONFIG = 9,
+	CCHCAUSE_CBR_RESOURCES_OVERSUBSCRIPED = 10,
+	CCHCAUSE_DSR_RESOURCES_OVERSUBSCRIPED = 11,
+	CCHCAUSE_CBR_DEALLOCATION_ERROR = 12,
+};
+/*
+ * CBE - Control Block Extended
+ * 	Maintains internal GRU state for active CBs.
+ *
+ */
+struct gru_control_block_extended {
+	unsigned int reserved0:1;	/* DW 0  - low */
+	unsigned int imacpy:3;
+	unsigned int reserved1:4;
+	unsigned int xtypecpy:3;
+	unsigned int iaa0cpy:2;
+	unsigned int iaa1cpy:2;
+	unsigned int reserved2:1;
+	unsigned int opccpy:8;
+	unsigned int exopccpy:8;
+
+	unsigned int idef2cpy:22;	/* DW 0  - high */
+	unsigned int reserved3:10;
+
+	unsigned int idef4cpy:22;	/* DW 1 */
+	unsigned int reserved4:10;
+	unsigned int idef4upd:22;
+	unsigned int reserved5:10;
+
+	unsigned long idef1upd:64;	/* DW 2 */
+
+	unsigned long idef5cpy:64;	/* DW 3 */
+
+	unsigned long idef6cpy:64;	/* DW 4 */
+
+	unsigned long idef3upd:64;	/* DW 5 */
+
+	unsigned long idef5upd:64;	/* DW 6 */
+
+	unsigned int idef2upd:22;	/* DW 7 */
+	unsigned int reserved6:10;
+
+	unsigned int ecause:20;
+	unsigned int cbrstate:4;
+	unsigned int cbrexecstatus:8;
+};
+
+enum gru_cbr_state {
+	CBRSTATE_INACTIVE,
+	CBRSTATE_IDLE,
+	CBRSTATE_PE_CHECK,
+	CBRSTATE_QUEUED,
+	CBRSTATE_WAIT_RESPONSE,
+	CBRSTATE_INTERRUPTED,
+	CBRSTATE_INTERRUPTED_MISS_FMM,
+	CBRSTATE_BUSY_INTERRUPT_MISS_FMM,
+	CBRSTATE_INTERRUPTED_MISS_UPM,
+	CBRSTATE_BUSY_INTERRUPTED_MISS_UPM,
+	CBRSTATE_REQUEST_ISSUE,
+	CBRSTATE_BUSY_INTERRUPT,
+};
+
+/* CBE cbrexecstatus bits */
+#define CBR_EXS_ABORT_OCC_BIT			0
+#define CBR_EXS_INT_OCC_BIT			1
+#define CBR_EXS_PENDING_BIT			2
+#define CBR_EXS_QUEUED_BIT			3
+#define CBR_EXS_TLBHW_BIT			4
+#define CBR_EXS_EXCEPTION_BIT			5
+
+#define CBR_EXS_ABORT_OCC			(1 << CBR_EXS_ABORT_OCC_BIT)
+#define CBR_EXS_INT_OCC				(1 << CBR_EXS_INT_OCC_BIT)
+#define CBR_EXS_PENDING				(1 << CBR_EXS_PENDING_BIT)
+#define CBR_EXS_QUEUED				(1 << CBR_EXS_QUEUED_BIT)
+#define CBR_EXS_TLBHW				(1 << CBR_EXS_TLBHW_BIT)
+#define CBR_EXS_EXCEPTION			(1 << CBR_EXS_EXCEPTION_BIT)
+
+/* CBE ecause bits  - defined in gru_instructions.h */
+
+/*
+ * Convert a processor pagesize into the strange encoded pagesize used by the
+ * GRU. Processor pagesize is encoded as log of bytes per page. (or PAGE_SHIFT)
+ * 	pagesize	log pagesize	grupagesize
+ * 	  4k			12	0
+ * 	 16k 			14	1
+ * 	 64k			16	2
+ * 	256k			18	3
+ * 	  1m			20	4
+ * 	  2m			21	5
+ * 	  4m			22	6
+ * 	 16m			24	7
+ * 	 64m			26	8
+ * 	...
+ */
+#define GRU_PAGESIZE(sh)	((((sh) > 20 ? (sh) + 2: (sh)) >> 1) - 6)
+#define GRU_SIZEAVAIL(sh)	(1UL << GRU_PAGESIZE(sh))
+
+/* minimum TLB purge count to ensure a full purge */
+#define GRUMAXINVAL		1024UL
+
+
+/* Extract the status field from a kernel handle */
+#define GET_MSEG_HANDLE_STATUS(h)	(((*(unsigned long *)(h)) >> 16) & 3)
+
+static inline void start_instruction(void *h)
+{
+	unsigned long *w0 = h;
+
+	wmb();		/* setting CMD bit must be last */
+	*w0 = *w0 | 1;
+	gru_flush_cache(h);
+}
+
+static inline int wait_instruction_complete(void *h)
+{
+	int status;
+
+	do {
+		cpu_relax();
+		barrier();
+		status = GET_MSEG_HANDLE_STATUS(h);
+	} while (status == CCHSTATUS_ACTIVE);
+	return status;
+}
+
+#if defined CONFIG_IA64
+static inline void cch_allocate_set_asids(
+		  struct gru_context_configuration_handle *cch, int asidval)
+{
+	int i;
+
+	for (i = 0; i <= RGN_HPAGE; i++) {  /*  assume HPAGE is last region */
+		cch->asid[i] = (asidval++);
+#if 0
+		/* ZZZ hugepages not supported yet */
+		if (i == RGN_HPAGE)
+			cch->sizeavail[i] = GRU_SIZEAVAIL(hpage_shift);
+		else
+#endif
+			cch->sizeavail[i] = GRU_SIZEAVAIL(PAGE_SHIFT);
+	}
+}
+#elif defined CONFIG_X86_64
+static inline void cch_allocate_set_asids(
+		  struct gru_context_configuration_handle *cch, int asidval)
+{
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		cch->asid[i] = asidval++;
+		cch->sizeavail[i] = GRU_SIZEAVAIL(PAGE_SHIFT) |
+			GRU_SIZEAVAIL(21);
+	}
+}
+#endif
+
+static inline int cch_allocate(struct gru_context_configuration_handle *cch,
+			       int asidval, unsigned long cbrmap,
+			       unsigned long dsrmap)
+{
+	cch_allocate_set_asids(cch, asidval);
+	cch->dsr_allocation_map = dsrmap;
+	cch->cbr_allocation_map = cbrmap;
+	cch->opc = CCHOP_ALLOCATE;
+	start_instruction(cch);
+	return wait_instruction_complete(cch);
+}
+
+static inline int cch_start(struct gru_context_configuration_handle *cch)
+{
+	cch->opc = CCHOP_START;
+	start_instruction(cch);
+	return wait_instruction_complete(cch);
+}
+
+static inline int cch_interrupt(struct gru_context_configuration_handle *cch)
+{
+	cch->opc = CCHOP_INTERRUPT;
+	start_instruction(cch);
+	return wait_instruction_complete(cch);
+}
+
+static inline int cch_deallocate(struct gru_context_configuration_handle *cch)
+{
+	cch->opc = CCHOP_DEALLOCATE;
+	start_instruction(cch);
+	return wait_instruction_complete(cch);
+}
+
+static inline int cch_interrupt_sync(struct gru_context_configuration_handle
+				     *cch)
+{
+	cch->opc = CCHOP_INTERRUPT_SYNC;
+	start_instruction(cch);
+	return wait_instruction_complete(cch);
+}
+
+static inline int tgh_invalidate(struct gru_tlb_global_handle *tgh,
+				 unsigned long vaddr, unsigned long vaddrmask,
+				 int asid, int pagesize, int global, int n,
+				 unsigned short ctxbitmap)
+{
+	tgh->vaddr = vaddr;
+	tgh->asid = asid;
+	tgh->pagesize = pagesize;
+	tgh->n = n;
+	tgh->global = global;
+	tgh->vaddrmask = vaddrmask;
+	tgh->ctxbitmap = ctxbitmap;
+	tgh->opc = TGHOP_TLBINV;
+	start_instruction(tgh);
+	return wait_instruction_complete(tgh);
+}
+
+static inline void tfh_write_only(struct gru_tlb_fault_handle *tfh,
+				  unsigned long pfn, unsigned long vaddr,
+				  int asid, int dirty, int pagesize)
+{
+	tfh->fillasid = asid;
+	tfh->fillvaddr = vaddr;
+	tfh->pfn = pfn;
+	tfh->dirty = dirty;
+	tfh->pagesize = pagesize;
+	tfh->opc = TFHOP_WRITE_ONLY;
+	start_instruction(tfh);
+}
+
+static inline void tfh_write_restart(struct gru_tlb_fault_handle *tfh,
+				     unsigned long paddr, int gaa,
+				     unsigned long vaddr, int asid, int dirty,
+				     int pagesize)
+{
+	tfh->fillasid = asid;
+	tfh->fillvaddr = vaddr;
+	tfh->pfn = paddr >> GRU_PADDR_SHIFT;
+	tfh->gaa = gaa;
+	tfh->dirty = dirty;
+	tfh->pagesize = pagesize;
+	tfh->opc = TFHOP_WRITE_RESTART;
+	start_instruction(tfh);
+}
+
+static inline void tfh_restart(struct gru_tlb_fault_handle *tfh)
+{
+	tfh->opc = TFHOP_RESTART;
+	start_instruction(tfh);
+}
+
+static inline void tfh_user_polling_mode(struct gru_tlb_fault_handle *tfh)
+{
+	tfh->opc = TFHOP_USER_POLLING_MODE;
+	start_instruction(tfh);
+}
+
+static inline void tfh_exception(struct gru_tlb_fault_handle *tfh)
+{
+	tfh->opc = TFHOP_EXCEPTION;
+	start_instruction(tfh);
+}
+
+#endif /* __GRUHANDLES_H__ */
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
new file mode 100644
index 0000000..dfd49af
--- /dev/null
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -0,0 +1,679 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              KERNEL SERVICES THAT USE THE GRU
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include "gru.h"
+#include "grulib.h"
+#include "grutables.h"
+#include "grukservices.h"
+#include "gru_instructions.h"
+#include <asm/uv/uv_hub.h>
+
+/*
+ * Kernel GRU Usage
+ *
+ * The following is an interim algorithm for management of kernel GRU
+ * resources. This will likely be replaced when we better understand the
+ * kernel/user requirements.
+ *
+ * At boot time, the kernel permanently reserves a fixed number of
+ * CBRs/DSRs for each cpu to use. The resources are all taken from
+ * the GRU chiplet 1 on the blade. This leaves the full set of resources
+ * of chiplet 0 available to be allocated to a single user.
+ */
+
+/* Blade percpu resources PERMANENTLY reserved for kernel use */
+#define GRU_NUM_KERNEL_CBR      1
+#define GRU_NUM_KERNEL_DSR_BYTES 256
+#define KERNEL_CTXNUM           15
+
+/* GRU instruction attributes for all instructions */
+#define IMA			IMA_CB_DELAY
+
+/* GRU cacheline size is always 64 bytes - even on arches with 128 byte lines */
+#define __gru_cacheline_aligned__                               \
+	__attribute__((__aligned__(GRU_CACHE_LINE_BYTES)))
+
+#define MAGIC	0x1234567887654321UL
+
+/* Default retry count for GRU errors on kernel instructions */
+#define EXCEPTION_RETRY_LIMIT	3
+
+/* Status of message queue sections */
+#define MQS_EMPTY		0
+#define MQS_FULL		1
+#define MQS_NOOP		2
+
+/*----------------- RESOURCE MANAGEMENT -------------------------------------*/
+/* optimized for x86_64 */
+struct message_queue {
+	union gru_mesqhead	head __gru_cacheline_aligned__;	/* CL 0 */
+	int			qlines;				/* DW 1 */
+	long 			hstatus[2];
+	void 			*next __gru_cacheline_aligned__;/* CL 1 */
+	void 			*limit;
+	void 			*start;
+	void 			*start2;
+	char			data ____cacheline_aligned;	/* CL 2 */
+};
+
+/* First word in every message - used by mesq interface */
+struct message_header {
+	char	present;
+	char	present2;
+	char 	lines;
+	char	fill;
+};
+
+#define QLINES(mq)	((mq) + offsetof(struct message_queue, qlines))
+#define HSTATUS(mq, h)	((mq) + offsetof(struct message_queue, hstatus[h]))
+
+static int gru_get_cpu_resources(int dsr_bytes, void **cb, void **dsr)
+{
+	struct gru_blade_state *bs;
+	int lcpu;
+
+	BUG_ON(dsr_bytes > GRU_NUM_KERNEL_DSR_BYTES);
+	preempt_disable();
+	bs = gru_base[uv_numa_blade_id()];
+	lcpu = uv_blade_processor_id();
+	*cb = bs->kernel_cb + lcpu * GRU_HANDLE_STRIDE;
+	*dsr = bs->kernel_dsr + lcpu * GRU_NUM_KERNEL_DSR_BYTES;
+	return 0;
+}
+
+static void gru_free_cpu_resources(void *cb, void *dsr)
+{
+	preempt_enable();
+}
+
+int gru_get_cb_exception_detail(void *cb,
+		struct control_block_extended_exc_detail *excdet)
+{
+	struct gru_control_block_extended *cbe;
+
+	cbe = get_cbe(GRUBASE(cb), get_cb_number(cb));
+	excdet->opc = cbe->opccpy;
+	excdet->exopc = cbe->exopccpy;
+	excdet->ecause = cbe->ecause;
+	excdet->exceptdet0 = cbe->idef1upd;
+	excdet->exceptdet1 = cbe->idef3upd;
+	return 0;
+}
+
+char *gru_get_cb_exception_detail_str(int ret, void *cb,
+				      char *buf, int size)
+{
+	struct gru_control_block_status *gen = (void *)cb;
+	struct control_block_extended_exc_detail excdet;
+
+	if (ret > 0 && gen->istatus == CBS_EXCEPTION) {
+		gru_get_cb_exception_detail(cb, &excdet);
+		snprintf(buf, size,
+			"GRU exception: cb %p, opc %d, exopc %d, ecause 0x%x,"
+			"excdet0 0x%lx, excdet1 0x%x",
+			gen, excdet.opc, excdet.exopc, excdet.ecause,
+			excdet.exceptdet0, excdet.exceptdet1);
+	} else {
+		snprintf(buf, size, "No exception");
+	}
+	return buf;
+}
+
+static int gru_wait_idle_or_exception(struct gru_control_block_status *gen)
+{
+	while (gen->istatus >= CBS_ACTIVE) {
+		cpu_relax();
+		barrier();
+	}
+	return gen->istatus;
+}
+
+static int gru_retry_exception(void *cb)
+{
+	struct gru_control_block_status *gen = (void *)cb;
+	struct control_block_extended_exc_detail excdet;
+	int retry = EXCEPTION_RETRY_LIMIT;
+
+	while (1)  {
+		if (gru_get_cb_message_queue_substatus(cb))
+			break;
+		if (gru_wait_idle_or_exception(gen) == CBS_IDLE)
+			return CBS_IDLE;
+
+		gru_get_cb_exception_detail(cb, &excdet);
+		if (excdet.ecause & ~EXCEPTION_RETRY_BITS)
+			break;
+		if (retry-- == 0)
+			break;
+		gen->icmd = 1;
+		gru_flush_cache(gen);
+	}
+	return CBS_EXCEPTION;
+}
+
+int gru_check_status_proc(void *cb)
+{
+	struct gru_control_block_status *gen = (void *)cb;
+	int ret;
+
+	ret = gen->istatus;
+	if (ret != CBS_EXCEPTION)
+		return ret;
+	return gru_retry_exception(cb);
+
+}
+
+int gru_wait_proc(void *cb)
+{
+	struct gru_control_block_status *gen = (void *)cb;
+	int ret;
+
+	ret = gru_wait_idle_or_exception(gen);
+	if (ret == CBS_EXCEPTION)
+		ret = gru_retry_exception(cb);
+
+	return ret;
+}
+
+void gru_abort(int ret, void *cb, char *str)
+{
+	char buf[GRU_EXC_STR_SIZE];
+
+	panic("GRU FATAL ERROR: %s - %s\n", str,
+	      gru_get_cb_exception_detail_str(ret, cb, buf, sizeof(buf)));
+}
+
+void gru_wait_abort_proc(void *cb)
+{
+	int ret;
+
+	ret = gru_wait_proc(cb);
+	if (ret)
+		gru_abort(ret, cb, "gru_wait_abort");
+}
+
+
+/*------------------------------ MESSAGE QUEUES -----------------------------*/
+
+/* Internal status . These are NOT returned to the user. */
+#define MQIE_AGAIN		-1	/* try again */
+
+
+/*
+ * Save/restore the "present" flag that is in the second line of 2-line
+ * messages
+ */
+static inline int get_present2(void *p)
+{
+	struct message_header *mhdr = p + GRU_CACHE_LINE_BYTES;
+	return mhdr->present;
+}
+
+static inline void restore_present2(void *p, int val)
+{
+	struct message_header *mhdr = p + GRU_CACHE_LINE_BYTES;
+	mhdr->present = val;
+}
+
+/*
+ * Create a message queue.
+ * 	qlines - message queue size in cache lines. Includes 2-line header.
+ */
+int gru_create_message_queue(void *p, unsigned int bytes)
+{
+	struct message_queue *mq = p;
+	unsigned int qlines;
+
+	qlines = bytes / GRU_CACHE_LINE_BYTES - 2;
+	memset(mq, 0, bytes);
+	mq->start = &mq->data;
+	mq->start2 = &mq->data + (qlines / 2 - 1) * GRU_CACHE_LINE_BYTES;
+	mq->next = &mq->data;
+	mq->limit = &mq->data + (qlines - 2) * GRU_CACHE_LINE_BYTES;
+	mq->qlines = qlines;
+	mq->hstatus[0] = 0;
+	mq->hstatus[1] = 1;
+	mq->head = gru_mesq_head(2, qlines / 2 + 1);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gru_create_message_queue);
+
+/*
+ * Send a NOOP message to a message queue
+ * 	Returns:
+ * 		 0 - if queue is full after the send. This is the normal case
+ * 		     but various races can change this.
+ *		-1 - if mesq sent successfully but queue not full
+ *		>0 - unexpected error. MQE_xxx returned
+ */
+static int send_noop_message(void *cb,
+				unsigned long mq, void *mesg)
+{
+	const struct message_header noop_header = {
+					.present = MQS_NOOP, .lines = 1};
+	unsigned long m;
+	int substatus, ret;
+	struct message_header save_mhdr, *mhdr = mesg;
+
+	STAT(mesq_noop);
+	save_mhdr = *mhdr;
+	*mhdr = noop_header;
+	gru_mesq(cb, mq, gru_get_tri(mhdr), 1, IMA);
+	ret = gru_wait(cb);
+
+	if (ret) {
+		substatus = gru_get_cb_message_queue_substatus(cb);
+		switch (substatus) {
+		case CBSS_NO_ERROR:
+			STAT(mesq_noop_unexpected_error);
+			ret = MQE_UNEXPECTED_CB_ERR;
+			break;
+		case CBSS_LB_OVERFLOWED:
+			STAT(mesq_noop_lb_overflow);
+			ret = MQE_CONGESTION;
+			break;
+		case CBSS_QLIMIT_REACHED:
+			STAT(mesq_noop_qlimit_reached);
+			ret = 0;
+			break;
+		case CBSS_AMO_NACKED:
+			STAT(mesq_noop_amo_nacked);
+			ret = MQE_CONGESTION;
+			break;
+		case CBSS_PUT_NACKED:
+			STAT(mesq_noop_put_nacked);
+			m = mq + (gru_get_amo_value_head(cb) << 6);
+			gru_vstore(cb, m, gru_get_tri(mesg), XTYPE_CL, 1, 1,
+						IMA);
+			if (gru_wait(cb) == CBS_IDLE)
+				ret = MQIE_AGAIN;
+			else
+				ret = MQE_UNEXPECTED_CB_ERR;
+			break;
+		case CBSS_PAGE_OVERFLOW:
+		default:
+			BUG();
+		}
+	}
+	*mhdr = save_mhdr;
+	return ret;
+}
+
+/*
+ * Handle a gru_mesq full.
+ */
+static int send_message_queue_full(void *cb,
+			   unsigned long mq, void *mesg, int lines)
+{
+	union gru_mesqhead mqh;
+	unsigned int limit, head;
+	unsigned long avalue;
+	int half, qlines, save;
+
+	/* Determine if switching to first/second half of q */
+	avalue = gru_get_amo_value(cb);
+	head = gru_get_amo_value_head(cb);
+	limit = gru_get_amo_value_limit(cb);
+
+	/*
+	 * Fetch "qlines" from the queue header. Since the queue may be
+	 * in memory that can't be accessed using socket addresses, use
+	 * the GRU to access the data. Use DSR space from the message.
+	 */
+	save = *(int *)mesg;
+	gru_vload(cb, QLINES(mq), gru_get_tri(mesg), XTYPE_W, 1, 1, IMA);
+	if (gru_wait(cb) != CBS_IDLE)
+		goto cberr;
+	qlines = *(int *)mesg;
+	*(int *)mesg = save;
+	half = (limit != qlines);
+
+	if (half)
+		mqh = gru_mesq_head(qlines / 2 + 1, qlines);
+	else
+		mqh = gru_mesq_head(2, qlines / 2 + 1);
+
+	/* Try to get lock for switching head pointer */
+	gru_gamir(cb, EOP_IR_CLR, HSTATUS(mq, half), XTYPE_DW, IMA);
+	if (gru_wait(cb) != CBS_IDLE)
+		goto cberr;
+	if (!gru_get_amo_value(cb)) {
+		STAT(mesq_qf_locked);
+		return MQE_QUEUE_FULL;
+	}
+
+	/* Got the lock. Send optional NOP if queue not full, */
+	if (head != limit) {
+		if (send_noop_message(cb, mq, mesg)) {
+			gru_gamir(cb, EOP_IR_INC, HSTATUS(mq, half),
+					XTYPE_DW, IMA);
+			if (gru_wait(cb) != CBS_IDLE)
+				goto cberr;
+			STAT(mesq_qf_noop_not_full);
+			return MQIE_AGAIN;
+		}
+		avalue++;
+	}
+
+	/* Then flip queuehead to other half of queue. */
+	gru_gamer(cb, EOP_ERR_CSWAP, mq, XTYPE_DW, mqh.val, avalue, IMA);
+	if (gru_wait(cb) != CBS_IDLE)
+		goto cberr;
+
+	/* If not successfully in swapping queue head, clear the hstatus lock */
+	if (gru_get_amo_value(cb) != avalue) {
+		STAT(mesq_qf_switch_head_failed);
+		gru_gamir(cb, EOP_IR_INC, HSTATUS(mq, half), XTYPE_DW, IMA);
+		if (gru_wait(cb) != CBS_IDLE)
+			goto cberr;
+	}
+	return MQIE_AGAIN;
+cberr:
+	STAT(mesq_qf_unexpected_error);
+	return MQE_UNEXPECTED_CB_ERR;
+}
+
+
+/*
+ * Handle a gru_mesq failure. Some of these failures are software recoverable
+ * or retryable.
+ */
+static int send_message_failure(void *cb,
+				unsigned long mq,
+				void *mesg,
+				int lines)
+{
+	int substatus, ret = 0;
+	unsigned long m;
+
+	substatus = gru_get_cb_message_queue_substatus(cb);
+	switch (substatus) {
+	case CBSS_NO_ERROR:
+		STAT(mesq_send_unexpected_error);
+		ret = MQE_UNEXPECTED_CB_ERR;
+		break;
+	case CBSS_LB_OVERFLOWED:
+		STAT(mesq_send_lb_overflow);
+		ret = MQE_CONGESTION;
+		break;
+	case CBSS_QLIMIT_REACHED:
+		STAT(mesq_send_qlimit_reached);
+		ret = send_message_queue_full(cb, mq, mesg, lines);
+		break;
+	case CBSS_AMO_NACKED:
+		STAT(mesq_send_amo_nacked);
+		ret = MQE_CONGESTION;
+		break;
+	case CBSS_PUT_NACKED:
+		STAT(mesq_send_put_nacked);
+		m =mq + (gru_get_amo_value_head(cb) << 6);
+		gru_vstore(cb, m, gru_get_tri(mesg), XTYPE_CL, lines, 1, IMA);
+		if (gru_wait(cb) == CBS_IDLE)
+			ret = MQE_OK;
+		else
+			ret = MQE_UNEXPECTED_CB_ERR;
+		break;
+	default:
+		BUG();
+	}
+	return ret;
+}
+
+/*
+ * Send a message to a message queue
+ * 	cb	GRU control block to use to send message
+ * 	mq	message queue
+ * 	mesg	message. ust be vaddr within a GSEG
+ * 	bytes	message size (<= 2 CL)
+ */
+int gru_send_message_gpa(unsigned long mq, void *mesg, unsigned int bytes)
+{
+	struct message_header *mhdr;
+	void *cb;
+	void *dsr;
+	int istatus, clines, ret;
+
+	STAT(mesq_send);
+	BUG_ON(bytes < sizeof(int) || bytes > 2 * GRU_CACHE_LINE_BYTES);
+
+	clines = (bytes + GRU_CACHE_LINE_BYTES - 1) / GRU_CACHE_LINE_BYTES;
+	if (gru_get_cpu_resources(bytes, &cb, &dsr))
+		return MQE_BUG_NO_RESOURCES;
+	memcpy(dsr, mesg, bytes);
+	mhdr = dsr;
+	mhdr->present = MQS_FULL;
+	mhdr->lines = clines;
+	if (clines == 2) {
+		mhdr->present2 = get_present2(mhdr);
+		restore_present2(mhdr, MQS_FULL);
+	}
+
+	do {
+		ret = MQE_OK;
+		gru_mesq(cb, mq, gru_get_tri(mhdr), clines, IMA);
+		istatus = gru_wait(cb);
+		if (istatus != CBS_IDLE)
+			ret = send_message_failure(cb, mq, dsr, clines);
+	} while (ret == MQIE_AGAIN);
+	gru_free_cpu_resources(cb, dsr);
+
+	if (ret)
+		STAT(mesq_send_failed);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gru_send_message_gpa);
+
+/*
+ * Advance the receive pointer for the queue to the next message.
+ */
+void gru_free_message(void *rmq, void *mesg)
+{
+	struct message_queue *mq = rmq;
+	struct message_header *mhdr = mq->next;
+	void *next, *pnext;
+	int half = -1;
+	int lines = mhdr->lines;
+
+	if (lines == 2)
+		restore_present2(mhdr, MQS_EMPTY);
+	mhdr->present = MQS_EMPTY;
+
+	pnext = mq->next;
+	next = pnext + GRU_CACHE_LINE_BYTES * lines;
+	if (next == mq->limit) {
+		next = mq->start;
+		half = 1;
+	} else if (pnext < mq->start2 && next >= mq->start2) {
+		half = 0;
+	}
+
+	if (half >= 0)
+		mq->hstatus[half] = 1;
+	mq->next = next;
+}
+EXPORT_SYMBOL_GPL(gru_free_message);
+
+/*
+ * Get next message from message queue. Return NULL if no message
+ * present. User must call next_message() to move to next message.
+ * 	rmq	message queue
+ */
+void *gru_get_next_message(void *rmq)
+{
+	struct message_queue *mq = rmq;
+	struct message_header *mhdr = mq->next;
+	int present = mhdr->present;
+
+	/* skip NOOP messages */
+	STAT(mesq_receive);
+	while (present == MQS_NOOP) {
+		gru_free_message(rmq, mhdr);
+		mhdr = mq->next;
+		present = mhdr->present;
+	}
+
+	/* Wait for both halves of 2 line messages */
+	if (present == MQS_FULL && mhdr->lines == 2 &&
+				get_present2(mhdr) == MQS_EMPTY)
+		present = MQS_EMPTY;
+
+	if (!present) {
+		STAT(mesq_receive_none);
+		return NULL;
+	}
+
+	if (mhdr->lines == 2)
+		restore_present2(mhdr, mhdr->present2);
+
+	return mhdr;
+}
+EXPORT_SYMBOL_GPL(gru_get_next_message);
+
+/* ---------------------- GRU DATA COPY FUNCTIONS ---------------------------*/
+
+/*
+ * Copy a block of data using the GRU resources
+ */
+int gru_copy_gpa(unsigned long dest_gpa, unsigned long src_gpa,
+				unsigned int bytes)
+{
+	void *cb;
+	void *dsr;
+	int ret;
+
+	STAT(copy_gpa);
+	if (gru_get_cpu_resources(GRU_NUM_KERNEL_DSR_BYTES, &cb, &dsr))
+		return MQE_BUG_NO_RESOURCES;
+	gru_bcopy(cb, src_gpa, dest_gpa, gru_get_tri(dsr),
+		  XTYPE_B, bytes, GRU_NUM_KERNEL_DSR_BYTES, IMA);
+	ret = gru_wait(cb);
+	gru_free_cpu_resources(cb, dsr);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gru_copy_gpa);
+
+/* ------------------- KERNEL QUICKTESTS RUN AT STARTUP ----------------*/
+/* 	Temp - will delete after we gain confidence in the GRU		*/
+static __cacheline_aligned unsigned long word0;
+static __cacheline_aligned unsigned long word1;
+
+static int quicktest(struct gru_state *gru)
+{
+	void *cb;
+	void *ds;
+	unsigned long *p;
+
+	cb = get_gseg_base_address_cb(gru->gs_gru_base_vaddr, KERNEL_CTXNUM, 0);
+	ds = get_gseg_base_address_ds(gru->gs_gru_base_vaddr, KERNEL_CTXNUM, 0);
+	p = ds;
+	word0 = MAGIC;
+
+	gru_vload(cb, uv_gpa(&word0), 0, XTYPE_DW, 1, 1, IMA);
+	if (gru_wait(cb) != CBS_IDLE)
+		BUG();
+
+	if (*(unsigned long *)ds != MAGIC)
+		BUG();
+	gru_vstore(cb, uv_gpa(&word1), 0, XTYPE_DW, 1, 1, IMA);
+	if (gru_wait(cb) != CBS_IDLE)
+		BUG();
+
+	if (word0 != word1 || word0 != MAGIC) {
+		printk
+		    ("GRU quicktest err: gru %d, found 0x%lx, expected 0x%lx\n",
+		     gru->gs_gid, word1, MAGIC);
+		BUG();		/* ZZZ should not be fatal */
+	}
+
+	return 0;
+}
+
+
+int gru_kservices_init(struct gru_state *gru)
+{
+	struct gru_blade_state *bs;
+	struct gru_context_configuration_handle *cch;
+	unsigned long cbr_map, dsr_map;
+	int err, num, cpus_possible;
+
+	/*
+	 * Currently, resources are reserved ONLY on the second chiplet
+	 * on each blade. This leaves ALL resources on chiplet 0 available
+	 * for user code.
+	 */
+	bs = gru->gs_blade;
+	if (gru != &bs->bs_grus[1])
+		return 0;
+
+	cpus_possible = uv_blade_nr_possible_cpus(gru->gs_blade_id);
+
+	num = GRU_NUM_KERNEL_CBR * cpus_possible;
+	cbr_map = gru_reserve_cb_resources(gru, GRU_CB_COUNT_TO_AU(num), NULL);
+	gru->gs_reserved_cbrs += num;
+
+	num = GRU_NUM_KERNEL_DSR_BYTES * cpus_possible;
+	dsr_map = gru_reserve_ds_resources(gru, GRU_DS_BYTES_TO_AU(num), NULL);
+	gru->gs_reserved_dsr_bytes += num;
+
+	gru->gs_active_contexts++;
+	__set_bit(KERNEL_CTXNUM, &gru->gs_context_map);
+	cch = get_cch(gru->gs_gru_base_vaddr, KERNEL_CTXNUM);
+
+	bs->kernel_cb = get_gseg_base_address_cb(gru->gs_gru_base_vaddr,
+					KERNEL_CTXNUM, 0);
+	bs->kernel_dsr = get_gseg_base_address_ds(gru->gs_gru_base_vaddr,
+					KERNEL_CTXNUM, 0);
+
+	lock_cch_handle(cch);
+	cch->tfm_fault_bit_enable = 0;
+	cch->tlb_int_enable = 0;
+	cch->tfm_done_bit_enable = 0;
+	cch->unmap_enable = 1;
+	err = cch_allocate(cch, 0, cbr_map, dsr_map);
+	if (err) {
+		gru_dbg(grudev,
+			"Unable to allocate kernel CCH: gru %d, err %d\n",
+			gru->gs_gid, err);
+		BUG();
+	}
+	if (cch_start(cch)) {
+		gru_dbg(grudev, "Unable to start kernel CCH: gru %d, err %d\n",
+			gru->gs_gid, err);
+		BUG();
+	}
+	unlock_cch_handle(cch);
+
+	if (gru_options & GRU_QUICKLOOK)
+		quicktest(gru);
+	return 0;
+}
diff --git a/drivers/misc/sgi-gru/grukservices.h b/drivers/misc/sgi-gru/grukservices.h
new file mode 100644
index 0000000..eb17e0a
--- /dev/null
+++ b/drivers/misc/sgi-gru/grukservices.h
@@ -0,0 +1,134 @@
+
+/*
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef __GRU_KSERVICES_H_
+#define __GRU_KSERVICES_H_
+
+
+/*
+ * Message queues using the GRU to send/receive messages.
+ *
+ * These function allow the user to create a message queue for
+ * sending/receiving 1 or 2 cacheline messages using the GRU.
+ *
+ * Processes SENDING messages will use a kernel CBR/DSR to send
+ * the message. This is transparent to the caller.
+ *
+ * The receiver does not use any GRU resources.
+ *
+ * The functions support:
+ * 	- single receiver
+ * 	- multiple senders
+ *	- cross partition message
+ *
+ * Missing features ZZZ:
+ * 	- user options for dealing with timeouts, queue full, etc.
+ * 	- gru_create_message_queue() needs interrupt vector info
+ */
+
+/*
+ * Initialize a user allocated chunk of memory to be used as
+ * a message queue. The caller must ensure that the queue is
+ * in contiguous physical memory and is cacheline aligned.
+ *
+ * Message queue size is the total number of bytes allocated
+ * to the queue including a 2 cacheline header that is used
+ * to manage the queue.
+ *
+ *  Input:
+ * 	p	pointer to user allocated memory.
+ * 	bytes	size of message queue in bytes
+ *
+ *  Errors:
+ *  	0	OK
+ *  	>0	error
+ */
+extern int gru_create_message_queue(void *p, unsigned int bytes);
+
+/*
+ * Send a message to a message queue.
+ *
+ * Note: The message queue transport mechanism uses the first 32
+ * bits of the message. Users should avoid using these bits.
+ *
+ *
+ *   Input:
+ * 	xmq	message queue - must be a UV global physical address
+ * 	mesg	pointer to message. Must be 64-bit aligned
+ * 	bytes	size of message in bytes
+ *
+ *   Output:
+ *      0	message sent
+ *     >0	Send failure - see error codes below
+ *
+ */
+extern int gru_send_message_gpa(unsigned long mq_gpa, void *mesg,
+						unsigned int bytes);
+
+/* Status values for gru_send_message() */
+#define MQE_OK			0	/* message sent successfully */
+#define MQE_CONGESTION		1	/* temporary congestion, try again */
+#define MQE_QUEUE_FULL		2	/* queue is full */
+#define MQE_UNEXPECTED_CB_ERR	3	/* unexpected CB error */
+#define MQE_PAGE_OVERFLOW	10	/* BUG - queue overflowed a page */
+#define MQE_BUG_NO_RESOURCES	11	/* BUG - could not alloc GRU cb/dsr */
+
+/*
+ * Advance the receive pointer for the message queue to the next message.
+ * Note: current API requires messages to be gotten & freed in order. Future
+ * API extensions may allow for out-of-order freeing.
+ *
+ *   Input
+ * 	mq	message queue
+ * 	mesq	message being freed
+ */
+extern void gru_free_message(void *mq, void *mesq);
+
+/*
+ * Get next message from message queue. Returns pointer to
+ * message OR NULL if no message present.
+ * User must call gru_free_message() after message is processed
+ * in order to move the queue pointers to next message.
+ *
+ *   Input
+ * 	mq	message queue
+ *
+ *   Output:
+ *	p	pointer to message
+ *	NULL	no message available
+ */
+extern void *gru_get_next_message(void *mq);
+
+
+/*
+ * Copy data using the GRU. Source or destination can be located in a remote
+ * partition.
+ *
+ *    Input:
+ *    	dest_gpa	destination global physical address
+ *    	src_gpa		source global physical address
+ *    	bytes		number of bytes to copy
+ *
+ *    Output:
+ *	0		OK
+ *	>0		error
+ */
+extern int gru_copy_gpa(unsigned long dest_gpa, unsigned long src_gpa,
+							unsigned int bytes);
+
+#endif 		/* __GRU_KSERVICES_H_ */
diff --git a/drivers/misc/sgi-gru/grulib.h b/drivers/misc/sgi-gru/grulib.h
new file mode 100644
index 0000000..e56e196
--- /dev/null
+++ b/drivers/misc/sgi-gru/grulib.h
@@ -0,0 +1,97 @@
+/*
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Lesser General Public License as published by
+ *  the Free Software Foundation; either version 2.1 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRULIB_H__
+#define __GRULIB_H__
+
+#define GRU_BASENAME		"gru"
+#define GRU_FULLNAME		"/dev/gru"
+#define GRU_IOCTL_NUM 		 'G'
+
+/*
+ * Maximum number of GRU segments that a user can have open
+ * ZZZ temp - set high for testing. Revisit.
+ */
+#define GRU_MAX_OPEN_CONTEXTS		32
+
+/* Set Number of Request Blocks */
+#define GRU_CREATE_CONTEXT		_IOWR(GRU_IOCTL_NUM, 1, void *)
+
+/* Register task as using the slice */
+#define GRU_SET_TASK_SLICE		_IOWR(GRU_IOCTL_NUM, 5, void *)
+
+/* Fetch exception detail */
+#define GRU_USER_GET_EXCEPTION_DETAIL	_IOWR(GRU_IOCTL_NUM, 6, void *)
+
+/* For user call_os handling - normally a TLB fault */
+#define GRU_USER_CALL_OS		_IOWR(GRU_IOCTL_NUM, 8, void *)
+
+/* For user unload context */
+#define GRU_USER_UNLOAD_CONTEXT		_IOWR(GRU_IOCTL_NUM, 9, void *)
+
+/* For fetching GRU chiplet status */
+#define GRU_GET_CHIPLET_STATUS		_IOWR(GRU_IOCTL_NUM, 10, void *)
+
+/* For user TLB flushing (primarily for tests) */
+#define GRU_USER_FLUSH_TLB		_IOWR(GRU_IOCTL_NUM, 50, void *)
+
+/* Get some config options (primarily for tests & emulator) */
+#define GRU_GET_CONFIG_INFO		_IOWR(GRU_IOCTL_NUM, 51, void *)
+
+#define CONTEXT_WINDOW_BYTES(th)        (GRU_GSEG_PAGESIZE * (th))
+#define THREAD_POINTER(p, th)		(p + GRU_GSEG_PAGESIZE * (th))
+
+/*
+ * Structure used to pass TLB flush parameters to the driver
+ */
+struct gru_create_context_req {
+	unsigned long		gseg;
+	unsigned int		data_segment_bytes;
+	unsigned int		control_blocks;
+	unsigned int		maximum_thread_count;
+	unsigned int		options;
+};
+
+/*
+ * Structure used to pass unload context parameters to the driver
+ */
+struct gru_unload_context_req {
+	unsigned long	gseg;
+};
+
+/*
+ * Structure used to pass TLB flush parameters to the driver
+ */
+struct gru_flush_tlb_req {
+	unsigned long	gseg;
+	unsigned long	vaddr;
+	size_t		len;
+};
+
+/*
+ * GRU configuration info (temp - for testing)
+ */
+struct gru_config_info {
+	int		cpus;
+	int		blades;
+	int		nodes;
+	int		chiplets;
+	int		fill[16];
+};
+
+#endif /* __GRULIB_H__ */
diff --git a/drivers/misc/sgi-gru/grumain.c b/drivers/misc/sgi-gru/grumain.c
new file mode 100644
index 0000000..0eeb8dd
--- /dev/null
+++ b/drivers/misc/sgi-gru/grumain.c
@@ -0,0 +1,802 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *            DRIVER TABLE MANAGER + GRU CONTEXT LOAD/UNLOAD
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <asm/uv/uv_hub.h>
+#include "gru.h"
+#include "grutables.h"
+#include "gruhandles.h"
+
+unsigned long gru_options __read_mostly;
+
+static struct device_driver gru_driver = {
+	.name = "gru"
+};
+
+static struct device gru_device = {
+	.bus_id = {0},
+	.driver = &gru_driver,
+};
+
+struct device *grudev = &gru_device;
+
+/*
+ * Select a gru fault map to be used by the current cpu. Note that
+ * multiple cpus may be using the same map.
+ *	ZZZ should "shift" be used?? Depends on HT cpu numbering
+ *	ZZZ should be inline but did not work on emulator
+ */
+int gru_cpu_fault_map_id(void)
+{
+	return uv_blade_processor_id() % GRU_NUM_TFM;
+}
+
+/*--------- ASID Management -------------------------------------------
+ *
+ *  Initially, assign asids sequentially from MIN_ASID .. MAX_ASID.
+ *  Once MAX is reached, flush the TLB & start over. However,
+ *  some asids may still be in use. There won't be many (percentage wise) still
+ *  in use. Search active contexts & determine the value of the first
+ *  asid in use ("x"s below). Set "limit" to this value.
+ *  This defines a block of assignable asids.
+ *
+ *  When "limit" is reached, search forward from limit+1 and determine the
+ *  next block of assignable asids.
+ *
+ *  Repeat until MAX_ASID is reached, then start over again.
+ *
+ *  Each time MAX_ASID is reached, increment the asid generation. Since
+ *  the search for in-use asids only checks contexts with GRUs currently
+ *  assigned, asids in some contexts will be missed. Prior to loading
+ *  a context, the asid generation of the GTS asid is rechecked. If it
+ *  doesn't match the current generation, a new asid will be assigned.
+ *
+ *   	0---------------x------------x---------------------x----|
+ *	  ^-next	^-limit	   				^-MAX_ASID
+ *
+ * All asid manipulation & context loading/unloading is protected by the
+ * gs_lock.
+ */
+
+/* Hit the asid limit. Start over */
+static int gru_wrap_asid(struct gru_state *gru)
+{
+	gru_dbg(grudev, "gru %p\n", gru);
+	STAT(asid_wrap);
+	gru->gs_asid_gen++;
+	gru_flush_all_tlb(gru);
+	return MIN_ASID;
+}
+
+/* Find the next chunk of unused asids */
+static int gru_reset_asid_limit(struct gru_state *gru, int asid)
+{
+	int i, gid, inuse_asid, limit;
+
+	gru_dbg(grudev, "gru %p, asid 0x%x\n", gru, asid);
+	STAT(asid_next);
+	limit = MAX_ASID;
+	if (asid >= limit)
+		asid = gru_wrap_asid(gru);
+	gid = gru->gs_gid;
+again:
+	for (i = 0; i < GRU_NUM_CCH; i++) {
+		if (!gru->gs_gts[i])
+			continue;
+		inuse_asid = gru->gs_gts[i]->ts_gms->ms_asids[gid].mt_asid;
+		gru_dbg(grudev, "gru %p, inuse_asid 0x%x, cxtnum %d, gts %p\n",
+			gru, inuse_asid, i, gru->gs_gts[i]);
+		if (inuse_asid == asid) {
+			asid += ASID_INC;
+			if (asid >= limit) {
+				/*
+				 * empty range: reset the range limit and
+				 * start over
+				 */
+				limit = MAX_ASID;
+				if (asid >= MAX_ASID)
+					asid = gru_wrap_asid(gru);
+				goto again;
+			}
+		}
+
+		if ((inuse_asid > asid) && (inuse_asid < limit))
+			limit = inuse_asid;
+	}
+	gru->gs_asid_limit = limit;
+	gru->gs_asid = asid;
+	gru_dbg(grudev, "gru %p, new asid 0x%x, new_limit 0x%x\n", gru, asid,
+		limit);
+	return asid;
+}
+
+/* Assign a new ASID to a thread context.  */
+static int gru_assign_asid(struct gru_state *gru)
+{
+	int asid;
+
+	spin_lock(&gru->gs_asid_lock);
+	gru->gs_asid += ASID_INC;
+	asid = gru->gs_asid;
+	if (asid >= gru->gs_asid_limit)
+		asid = gru_reset_asid_limit(gru, asid);
+	spin_unlock(&gru->gs_asid_lock);
+
+	gru_dbg(grudev, "gru %p, asid 0x%x\n", gru, asid);
+	return asid;
+}
+
+/*
+ * Clear n bits in a word. Return a word indicating the bits that were cleared.
+ * Optionally, build an array of chars that contain the bit numbers allocated.
+ */
+static unsigned long reserve_resources(unsigned long *p, int n, int mmax,
+				       char *idx)
+{
+	unsigned long bits = 0;
+	int i;
+
+	do {
+		i = find_first_bit(p, mmax);
+		if (i == mmax)
+			BUG();
+		__clear_bit(i, p);
+		__set_bit(i, &bits);
+		if (idx)
+			*idx++ = i;
+	} while (--n);
+	return bits;
+}
+
+unsigned long gru_reserve_cb_resources(struct gru_state *gru, int cbr_au_count,
+				       char *cbmap)
+{
+	return reserve_resources(&gru->gs_cbr_map, cbr_au_count, GRU_CBR_AU,
+				 cbmap);
+}
+
+unsigned long gru_reserve_ds_resources(struct gru_state *gru, int dsr_au_count,
+				       char *dsmap)
+{
+	return reserve_resources(&gru->gs_dsr_map, dsr_au_count, GRU_DSR_AU,
+				 dsmap);
+}
+
+static void reserve_gru_resources(struct gru_state *gru,
+				  struct gru_thread_state *gts)
+{
+	gru->gs_active_contexts++;
+	gts->ts_cbr_map =
+	    gru_reserve_cb_resources(gru, gts->ts_cbr_au_count,
+				     gts->ts_cbr_idx);
+	gts->ts_dsr_map =
+	    gru_reserve_ds_resources(gru, gts->ts_dsr_au_count, NULL);
+}
+
+static void free_gru_resources(struct gru_state *gru,
+			       struct gru_thread_state *gts)
+{
+	gru->gs_active_contexts--;
+	gru->gs_cbr_map |= gts->ts_cbr_map;
+	gru->gs_dsr_map |= gts->ts_dsr_map;
+}
+
+/*
+ * Check if a GRU has sufficient free resources to satisfy an allocation
+ * request. Note: GRU locks may or may not be held when this is called. If
+ * not held, recheck after acquiring the appropriate locks.
+ *
+ * Returns 1 if sufficient resources, 0 if not
+ */
+static int check_gru_resources(struct gru_state *gru, int cbr_au_count,
+			       int dsr_au_count, int max_active_contexts)
+{
+	return hweight64(gru->gs_cbr_map) >= cbr_au_count
+		&& hweight64(gru->gs_dsr_map) >= dsr_au_count
+		&& gru->gs_active_contexts < max_active_contexts;
+}
+
+/*
+ * TLB manangment requires tracking all GRU chiplets that have loaded a GSEG
+ * context.
+ */
+static int gru_load_mm_tracker(struct gru_state *gru, struct gru_mm_struct *gms,
+			       int ctxnum)
+{
+	struct gru_mm_tracker *asids = &gms->ms_asids[gru->gs_gid];
+	unsigned short ctxbitmap = (1 << ctxnum);
+	int asid;
+
+	spin_lock(&gms->ms_asid_lock);
+	asid = asids->mt_asid;
+
+	if (asid == 0 || asids->mt_asid_gen != gru->gs_asid_gen) {
+		asid = gru_assign_asid(gru);
+		asids->mt_asid = asid;
+		asids->mt_asid_gen = gru->gs_asid_gen;
+		STAT(asid_new);
+	} else {
+		STAT(asid_reuse);
+	}
+
+	BUG_ON(asids->mt_ctxbitmap & ctxbitmap);
+	asids->mt_ctxbitmap |= ctxbitmap;
+	if (!test_bit(gru->gs_gid, gms->ms_asidmap))
+		__set_bit(gru->gs_gid, gms->ms_asidmap);
+	spin_unlock(&gms->ms_asid_lock);
+
+	gru_dbg(grudev,
+		"gru %x, gms %p, ctxnum 0x%d, asid 0x%x, asidmap 0x%lx\n",
+		gru->gs_gid, gms, ctxnum, asid, gms->ms_asidmap[0]);
+	return asid;
+}
+
+static void gru_unload_mm_tracker(struct gru_state *gru,
+				  struct gru_mm_struct *gms, int ctxnum)
+{
+	struct gru_mm_tracker *asids;
+	unsigned short ctxbitmap;
+
+	asids = &gms->ms_asids[gru->gs_gid];
+	ctxbitmap = (1 << ctxnum);
+	spin_lock(&gms->ms_asid_lock);
+	BUG_ON((asids->mt_ctxbitmap & ctxbitmap) != ctxbitmap);
+	asids->mt_ctxbitmap ^= ctxbitmap;
+	gru_dbg(grudev, "gru %x, gms %p, ctxnum 0x%d, asidmap 0x%lx\n",
+		gru->gs_gid, gms, ctxnum, gms->ms_asidmap[0]);
+	spin_unlock(&gms->ms_asid_lock);
+}
+
+/*
+ * Decrement the reference count on a GTS structure. Free the structure
+ * if the reference count goes to zero.
+ */
+void gts_drop(struct gru_thread_state *gts)
+{
+	if (gts && atomic_dec_return(&gts->ts_refcnt) == 0) {
+		gru_drop_mmu_notifier(gts->ts_gms);
+		kfree(gts);
+		STAT(gts_free);
+	}
+}
+
+/*
+ * Locate the GTS structure for the current thread.
+ */
+static struct gru_thread_state *gru_find_current_gts_nolock(struct gru_vma_data
+			    *vdata, int tsid)
+{
+	struct gru_thread_state *gts;
+
+	list_for_each_entry(gts, &vdata->vd_head, ts_next)
+	    if (gts->ts_tsid == tsid)
+		return gts;
+	return NULL;
+}
+
+/*
+ * Allocate a thread state structure.
+ */
+static struct gru_thread_state *gru_alloc_gts(struct vm_area_struct *vma,
+					      struct gru_vma_data *vdata,
+					      int tsid)
+{
+	struct gru_thread_state *gts;
+	int bytes;
+
+	bytes = DSR_BYTES(vdata->vd_dsr_au_count) +
+				CBR_BYTES(vdata->vd_cbr_au_count);
+	bytes += sizeof(struct gru_thread_state);
+	gts = kzalloc(bytes, GFP_KERNEL);
+	if (!gts)
+		return NULL;
+
+	STAT(gts_alloc);
+	atomic_set(&gts->ts_refcnt, 1);
+	mutex_init(&gts->ts_ctxlock);
+	gts->ts_cbr_au_count = vdata->vd_cbr_au_count;
+	gts->ts_dsr_au_count = vdata->vd_dsr_au_count;
+	gts->ts_user_options = vdata->vd_user_options;
+	gts->ts_tsid = tsid;
+	gts->ts_user_options = vdata->vd_user_options;
+	gts->ts_ctxnum = NULLCTX;
+	gts->ts_mm = current->mm;
+	gts->ts_vma = vma;
+	gts->ts_tlb_int_select = -1;
+	gts->ts_gms = gru_register_mmu_notifier();
+	if (!gts->ts_gms)
+		goto err;
+
+	gru_dbg(grudev, "alloc vdata %p, new gts %p\n", vdata, gts);
+	return gts;
+
+err:
+	gts_drop(gts);
+	return NULL;
+}
+
+/*
+ * Allocate a vma private data structure.
+ */
+struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma, int tsid)
+{
+	struct gru_vma_data *vdata = NULL;
+
+	vdata = kmalloc(sizeof(*vdata), GFP_KERNEL);
+	if (!vdata)
+		return NULL;
+
+	INIT_LIST_HEAD(&vdata->vd_head);
+	spin_lock_init(&vdata->vd_lock);
+	gru_dbg(grudev, "alloc vdata %p\n", vdata);
+	return vdata;
+}
+
+/*
+ * Find the thread state structure for the current thread.
+ */
+struct gru_thread_state *gru_find_thread_state(struct vm_area_struct *vma,
+					int tsid)
+{
+	struct gru_vma_data *vdata = vma->vm_private_data;
+	struct gru_thread_state *gts;
+
+	spin_lock(&vdata->vd_lock);
+	gts = gru_find_current_gts_nolock(vdata, tsid);
+	spin_unlock(&vdata->vd_lock);
+	gru_dbg(grudev, "vma %p, gts %p\n", vma, gts);
+	return gts;
+}
+
+/*
+ * Allocate a new thread state for a GSEG. Note that races may allow
+ * another thread to race to create a gts.
+ */
+struct gru_thread_state *gru_alloc_thread_state(struct vm_area_struct *vma,
+					int tsid)
+{
+	struct gru_vma_data *vdata = vma->vm_private_data;
+	struct gru_thread_state *gts, *ngts;
+
+	gts = gru_alloc_gts(vma, vdata, tsid);
+	if (!gts)
+		return NULL;
+
+	spin_lock(&vdata->vd_lock);
+	ngts = gru_find_current_gts_nolock(vdata, tsid);
+	if (ngts) {
+		gts_drop(gts);
+		gts = ngts;
+		STAT(gts_double_allocate);
+	} else {
+		list_add(&gts->ts_next, &vdata->vd_head);
+	}
+	spin_unlock(&vdata->vd_lock);
+	gru_dbg(grudev, "vma %p, gts %p\n", vma, gts);
+	return gts;
+}
+
+/*
+ * Free the GRU context assigned to the thread state.
+ */
+static void gru_free_gru_context(struct gru_thread_state *gts)
+{
+	struct gru_state *gru;
+
+	gru = gts->ts_gru;
+	gru_dbg(grudev, "gts %p, gru %p\n", gts, gru);
+
+	spin_lock(&gru->gs_lock);
+	gru->gs_gts[gts->ts_ctxnum] = NULL;
+	free_gru_resources(gru, gts);
+	BUG_ON(test_bit(gts->ts_ctxnum, &gru->gs_context_map) == 0);
+	__clear_bit(gts->ts_ctxnum, &gru->gs_context_map);
+	gts->ts_ctxnum = NULLCTX;
+	gts->ts_gru = NULL;
+	spin_unlock(&gru->gs_lock);
+
+	gts_drop(gts);
+	STAT(free_context);
+}
+
+/*
+ * Prefetching cachelines help hardware performance.
+ * (Strictly a performance enhancement. Not functionally required).
+ */
+static void prefetch_data(void *p, int num, int stride)
+{
+	while (num-- > 0) {
+		prefetchw(p);
+		p += stride;
+	}
+}
+
+static inline long gru_copy_handle(void *d, void *s)
+{
+	memcpy(d, s, GRU_HANDLE_BYTES);
+	return GRU_HANDLE_BYTES;
+}
+
+/* rewrite in assembly & use lots of prefetch */
+static void gru_load_context_data(void *save, void *grubase, int ctxnum,
+				  unsigned long cbrmap, unsigned long dsrmap)
+{
+	void *gseg, *cb, *cbe;
+	unsigned long length;
+	int i, scr;
+
+	gseg = grubase + ctxnum * GRU_GSEG_STRIDE;
+	length = hweight64(dsrmap) * GRU_DSR_AU_BYTES;
+	prefetch_data(gseg + GRU_DS_BASE, length / GRU_CACHE_LINE_BYTES,
+		      GRU_CACHE_LINE_BYTES);
+
+	cb = gseg + GRU_CB_BASE;
+	cbe = grubase + GRU_CBE_BASE;
+	for_each_cbr_in_allocation_map(i, &cbrmap, scr) {
+		prefetch_data(cb, 1, GRU_CACHE_LINE_BYTES);
+		prefetch_data(cbe + i * GRU_HANDLE_STRIDE, 1,
+			      GRU_CACHE_LINE_BYTES);
+		cb += GRU_HANDLE_STRIDE;
+	}
+
+	cb = gseg + GRU_CB_BASE;
+	for_each_cbr_in_allocation_map(i, &cbrmap, scr) {
+		save += gru_copy_handle(cb, save);
+		save += gru_copy_handle(cbe + i * GRU_HANDLE_STRIDE, save);
+		cb += GRU_HANDLE_STRIDE;
+	}
+
+	memcpy(gseg + GRU_DS_BASE, save, length);
+}
+
+static void gru_unload_context_data(void *save, void *grubase, int ctxnum,
+				    unsigned long cbrmap, unsigned long dsrmap)
+{
+	void *gseg, *cb, *cbe;
+	unsigned long length;
+	int i, scr;
+
+	gseg = grubase + ctxnum * GRU_GSEG_STRIDE;
+
+	cb = gseg + GRU_CB_BASE;
+	cbe = grubase + GRU_CBE_BASE;
+	for_each_cbr_in_allocation_map(i, &cbrmap, scr) {
+		save += gru_copy_handle(save, cb);
+		save += gru_copy_handle(save, cbe + i * GRU_HANDLE_STRIDE);
+		cb += GRU_HANDLE_STRIDE;
+	}
+	length = hweight64(dsrmap) * GRU_DSR_AU_BYTES;
+	memcpy(save, gseg + GRU_DS_BASE, length);
+}
+
+void gru_unload_context(struct gru_thread_state *gts, int savestate)
+{
+	struct gru_state *gru = gts->ts_gru;
+	struct gru_context_configuration_handle *cch;
+	int ctxnum = gts->ts_ctxnum;
+
+	zap_vma_ptes(gts->ts_vma, UGRUADDR(gts), GRU_GSEG_PAGESIZE);
+	cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
+
+	lock_cch_handle(cch);
+	if (cch_interrupt_sync(cch))
+		BUG();
+	gru_dbg(grudev, "gts %p\n", gts);
+
+	gru_unload_mm_tracker(gru, gts->ts_gms, gts->ts_ctxnum);
+	if (savestate)
+		gru_unload_context_data(gts->ts_gdata, gru->gs_gru_base_vaddr,
+					ctxnum, gts->ts_cbr_map,
+					gts->ts_dsr_map);
+
+	if (cch_deallocate(cch))
+		BUG();
+	gts->ts_force_unload = 0;	/* ts_force_unload locked by CCH lock */
+	unlock_cch_handle(cch);
+
+	gru_free_gru_context(gts);
+	STAT(unload_context);
+}
+
+/*
+ * Load a GRU context by copying it from the thread data structure in memory
+ * to the GRU.
+ */
+static void gru_load_context(struct gru_thread_state *gts)
+{
+	struct gru_state *gru = gts->ts_gru;
+	struct gru_context_configuration_handle *cch;
+	int err, asid, ctxnum = gts->ts_ctxnum;
+
+	gru_dbg(grudev, "gts %p\n", gts);
+	cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
+
+	lock_cch_handle(cch);
+	asid = gru_load_mm_tracker(gru, gts->ts_gms, gts->ts_ctxnum);
+	cch->tfm_fault_bit_enable =
+	    (gts->ts_user_options == GRU_OPT_MISS_FMM_POLL
+	     || gts->ts_user_options == GRU_OPT_MISS_FMM_INTR);
+	cch->tlb_int_enable = (gts->ts_user_options == GRU_OPT_MISS_FMM_INTR);
+	if (cch->tlb_int_enable) {
+		gts->ts_tlb_int_select = gru_cpu_fault_map_id();
+		cch->tlb_int_select = gts->ts_tlb_int_select;
+	}
+	cch->tfm_done_bit_enable = 0;
+	err = cch_allocate(cch, asid, gts->ts_cbr_map, gts->ts_dsr_map);
+	if (err) {
+		gru_dbg(grudev,
+			"err %d: cch %p, gts %p, cbr 0x%lx, dsr 0x%lx\n",
+			err, cch, gts, gts->ts_cbr_map, gts->ts_dsr_map);
+		BUG();
+	}
+
+	gru_load_context_data(gts->ts_gdata, gru->gs_gru_base_vaddr, ctxnum,
+			      gts->ts_cbr_map, gts->ts_dsr_map);
+
+	if (cch_start(cch))
+		BUG();
+	unlock_cch_handle(cch);
+
+	STAT(load_context);
+}
+
+/*
+ * Update fields in an active CCH:
+ * 	- retarget interrupts on local blade
+ * 	- force a delayed context unload by clearing the CCH asids. This
+ * 	  forces TLB misses for new GRU instructions. The context is unloaded
+ * 	  when the next TLB miss occurs.
+ */
+static int gru_update_cch(struct gru_thread_state *gts, int int_select)
+{
+	struct gru_context_configuration_handle *cch;
+	struct gru_state *gru = gts->ts_gru;
+	int i, ctxnum = gts->ts_ctxnum, ret = 0;
+
+	cch = get_cch(gru->gs_gru_base_vaddr, ctxnum);
+
+	lock_cch_handle(cch);
+	if (cch->state == CCHSTATE_ACTIVE) {
+		if (gru->gs_gts[gts->ts_ctxnum] != gts)
+			goto exit;
+		if (cch_interrupt(cch))
+			BUG();
+		if (int_select >= 0) {
+			gts->ts_tlb_int_select = int_select;
+			cch->tlb_int_select = int_select;
+		} else {
+			for (i = 0; i < 8; i++)
+				cch->asid[i] = 0;
+			cch->tfm_fault_bit_enable = 0;
+			cch->tlb_int_enable = 0;
+			gts->ts_force_unload = 1;
+		}
+		if (cch_start(cch))
+			BUG();
+		ret = 1;
+	}
+exit:
+	unlock_cch_handle(cch);
+	return ret;
+}
+
+/*
+ * Update CCH tlb interrupt select. Required when all the following is true:
+ * 	- task's GRU context is loaded into a GRU
+ * 	- task is using interrupt notification for TLB faults
+ * 	- task has migrated to a different cpu on the same blade where
+ * 	  it was previously running.
+ */
+static int gru_retarget_intr(struct gru_thread_state *gts)
+{
+	if (gts->ts_tlb_int_select < 0
+	    || gts->ts_tlb_int_select == gru_cpu_fault_map_id())
+		return 0;
+
+	gru_dbg(grudev, "retarget from %d to %d\n", gts->ts_tlb_int_select,
+		gru_cpu_fault_map_id());
+	return gru_update_cch(gts, gru_cpu_fault_map_id());
+}
+
+
+/*
+ * Insufficient GRU resources available on the local blade. Steal a context from
+ * a process. This is a hack until a _real_ resource scheduler is written....
+ */
+#define next_ctxnum(n)	((n) <  GRU_NUM_CCH - 2 ? (n) + 1 : 0)
+#define next_gru(b, g)	(((g) < &(b)->bs_grus[GRU_CHIPLETS_PER_BLADE - 1]) ?  \
+				 ((g)+1) : &(b)->bs_grus[0])
+
+static void gru_steal_context(struct gru_thread_state *gts)
+{
+	struct gru_blade_state *blade;
+	struct gru_state *gru, *gru0;
+	struct gru_thread_state *ngts = NULL;
+	int ctxnum, ctxnum0, flag = 0, cbr, dsr;
+
+	cbr = gts->ts_cbr_au_count;
+	dsr = gts->ts_dsr_au_count;
+
+	preempt_disable();
+	blade = gru_base[uv_numa_blade_id()];
+	spin_lock(&blade->bs_lock);
+
+	ctxnum = next_ctxnum(blade->bs_lru_ctxnum);
+	gru = blade->bs_lru_gru;
+	if (ctxnum == 0)
+		gru = next_gru(blade, gru);
+	ctxnum0 = ctxnum;
+	gru0 = gru;
+	while (1) {
+		if (check_gru_resources(gru, cbr, dsr, GRU_NUM_CCH))
+			break;
+		spin_lock(&gru->gs_lock);
+		for (; ctxnum < GRU_NUM_CCH; ctxnum++) {
+			if (flag && gru == gru0 && ctxnum == ctxnum0)
+				break;
+			ngts = gru->gs_gts[ctxnum];
+			/*
+			 * We are grabbing locks out of order, so trylock is
+			 * needed. GTSs are usually not locked, so the odds of
+			 * success are high. If trylock fails, try to steal a
+			 * different GSEG.
+			 */
+			if (ngts && mutex_trylock(&ngts->ts_ctxlock))
+				break;
+			ngts = NULL;
+			flag = 1;
+		}
+		spin_unlock(&gru->gs_lock);
+		if (ngts || (flag && gru == gru0 && ctxnum == ctxnum0))
+			break;
+		ctxnum = 0;
+		gru = next_gru(blade, gru);
+	}
+	blade->bs_lru_gru = gru;
+	blade->bs_lru_ctxnum = ctxnum;
+	spin_unlock(&blade->bs_lock);
+	preempt_enable();
+
+	if (ngts) {
+		STAT(steal_context);
+		ngts->ts_steal_jiffies = jiffies;
+		gru_unload_context(ngts, 1);
+		mutex_unlock(&ngts->ts_ctxlock);
+	} else {
+		STAT(steal_context_failed);
+	}
+	gru_dbg(grudev,
+		"stole gru %x, ctxnum %d from gts %p. Need cb %d, ds %d;"
+		" avail cb %ld, ds %ld\n",
+		gru->gs_gid, ctxnum, ngts, cbr, dsr, hweight64(gru->gs_cbr_map),
+		hweight64(gru->gs_dsr_map));
+}
+
+/*
+ * Scan the GRUs on the local blade & assign a GRU context.
+ */
+static struct gru_state *gru_assign_gru_context(struct gru_thread_state *gts)
+{
+	struct gru_state *gru, *grux;
+	int i, max_active_contexts;
+
+	preempt_disable();
+
+again:
+	gru = NULL;
+	max_active_contexts = GRU_NUM_CCH;
+	for_each_gru_on_blade(grux, uv_numa_blade_id(), i) {
+		if (check_gru_resources(grux, gts->ts_cbr_au_count,
+					gts->ts_dsr_au_count,
+					max_active_contexts)) {
+			gru = grux;
+			max_active_contexts = grux->gs_active_contexts;
+			if (max_active_contexts == 0)
+				break;
+		}
+	}
+
+	if (gru) {
+		spin_lock(&gru->gs_lock);
+		if (!check_gru_resources(gru, gts->ts_cbr_au_count,
+					 gts->ts_dsr_au_count, GRU_NUM_CCH)) {
+			spin_unlock(&gru->gs_lock);
+			goto again;
+		}
+		reserve_gru_resources(gru, gts);
+		gts->ts_gru = gru;
+		gts->ts_ctxnum =
+		    find_first_zero_bit(&gru->gs_context_map, GRU_NUM_CCH);
+		BUG_ON(gts->ts_ctxnum == GRU_NUM_CCH);
+		atomic_inc(&gts->ts_refcnt);
+		gru->gs_gts[gts->ts_ctxnum] = gts;
+		__set_bit(gts->ts_ctxnum, &gru->gs_context_map);
+		spin_unlock(&gru->gs_lock);
+
+		STAT(assign_context);
+		gru_dbg(grudev,
+			"gseg %p, gts %p, gru %x, ctx %d, cbr %d, dsr %d\n",
+			gseg_virtual_address(gts->ts_gru, gts->ts_ctxnum), gts,
+			gts->ts_gru->gs_gid, gts->ts_ctxnum,
+			gts->ts_cbr_au_count, gts->ts_dsr_au_count);
+	} else {
+		gru_dbg(grudev, "failed to allocate a GTS %s\n", "");
+		STAT(assign_context_failed);
+	}
+
+	preempt_enable();
+	return gru;
+}
+
+/*
+ * gru_nopage
+ *
+ * Map the user's GRU segment
+ *
+ * 	Note: gru segments alway mmaped on GRU_GSEG_PAGESIZE boundaries.
+ */
+int gru_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct gru_thread_state *gts;
+	unsigned long paddr, vaddr;
+
+	vaddr = (unsigned long)vmf->virtual_address;
+	gru_dbg(grudev, "vma %p, vaddr 0x%lx (0x%lx)\n",
+		vma, vaddr, GSEG_BASE(vaddr));
+	STAT(nopfn);
+
+	/* The following check ensures vaddr is a valid address in the VMA */
+	gts = gru_find_thread_state(vma, TSID(vaddr, vma));
+	if (!gts)
+		return VM_FAULT_SIGBUS;
+
+again:
+	preempt_disable();
+	mutex_lock(&gts->ts_ctxlock);
+	if (gts->ts_gru) {
+		if (gts->ts_gru->gs_blade_id != uv_numa_blade_id()) {
+			STAT(migrated_nopfn_unload);
+			gru_unload_context(gts, 1);
+		} else {
+			if (gru_retarget_intr(gts))
+				STAT(migrated_nopfn_retarget);
+		}
+	}
+
+	if (!gts->ts_gru) {
+		if (!gru_assign_gru_context(gts)) {
+			mutex_unlock(&gts->ts_ctxlock);
+			preempt_enable();
+			schedule_timeout(GRU_ASSIGN_DELAY);  /* true hack ZZZ */
+			if (gts->ts_steal_jiffies + GRU_STEAL_DELAY < jiffies)
+				gru_steal_context(gts);
+			goto again;
+		}
+		gru_load_context(gts);
+		paddr = gseg_physical_address(gts->ts_gru, gts->ts_ctxnum);
+		remap_pfn_range(vma, vaddr & ~(GRU_GSEG_PAGESIZE - 1),
+				paddr >> PAGE_SHIFT, GRU_GSEG_PAGESIZE,
+				vma->vm_page_prot);
+	}
+
+	mutex_unlock(&gts->ts_ctxlock);
+	preempt_enable();
+
+	return VM_FAULT_NOPAGE;
+}
+
diff --git a/drivers/misc/sgi-gru/gruprocfs.c b/drivers/misc/sgi-gru/gruprocfs.c
new file mode 100644
index 0000000..533923f
--- /dev/null
+++ b/drivers/misc/sgi-gru/gruprocfs.c
@@ -0,0 +1,336 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *              PROC INTERFACES
+ *
+ * This file supports the /proc interfaces for the GRU driver
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/proc_fs.h>
+#include <linux/device.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+#include "gru.h"
+#include "grulib.h"
+#include "grutables.h"
+
+#define printstat(s, f)		printstat_val(s, &gru_stats.f, #f)
+
+static void printstat_val(struct seq_file *s, atomic_long_t *v, char *id)
+{
+	unsigned long val = atomic_long_read(v);
+
+	if (val)
+		seq_printf(s, "%16lu %s\n", val, id);
+}
+
+static int statistics_show(struct seq_file *s, void *p)
+{
+	printstat(s, vdata_alloc);
+	printstat(s, vdata_free);
+	printstat(s, gts_alloc);
+	printstat(s, gts_free);
+	printstat(s, vdata_double_alloc);
+	printstat(s, gts_double_allocate);
+	printstat(s, assign_context);
+	printstat(s, assign_context_failed);
+	printstat(s, free_context);
+	printstat(s, load_context);
+	printstat(s, unload_context);
+	printstat(s, steal_context);
+	printstat(s, steal_context_failed);
+	printstat(s, nopfn);
+	printstat(s, break_cow);
+	printstat(s, asid_new);
+	printstat(s, asid_next);
+	printstat(s, asid_wrap);
+	printstat(s, asid_reuse);
+	printstat(s, intr);
+	printstat(s, call_os);
+	printstat(s, call_os_check_for_bug);
+	printstat(s, call_os_wait_queue);
+	printstat(s, user_flush_tlb);
+	printstat(s, user_unload_context);
+	printstat(s, user_exception);
+	printstat(s, set_task_slice);
+	printstat(s, migrate_check);
+	printstat(s, migrated_retarget);
+	printstat(s, migrated_unload);
+	printstat(s, migrated_unload_delay);
+	printstat(s, migrated_nopfn_retarget);
+	printstat(s, migrated_nopfn_unload);
+	printstat(s, tlb_dropin);
+	printstat(s, tlb_dropin_fail_no_asid);
+	printstat(s, tlb_dropin_fail_upm);
+	printstat(s, tlb_dropin_fail_invalid);
+	printstat(s, tlb_dropin_fail_range_active);
+	printstat(s, tlb_dropin_fail_idle);
+	printstat(s, tlb_dropin_fail_fmm);
+	printstat(s, mmu_invalidate_range);
+	printstat(s, mmu_invalidate_page);
+	printstat(s, mmu_clear_flush_young);
+	printstat(s, flush_tlb);
+	printstat(s, flush_tlb_gru);
+	printstat(s, flush_tlb_gru_tgh);
+	printstat(s, flush_tlb_gru_zero_asid);
+	printstat(s, copy_gpa);
+	printstat(s, mesq_receive);
+	printstat(s, mesq_receive_none);
+	printstat(s, mesq_send);
+	printstat(s, mesq_send_failed);
+	printstat(s, mesq_noop);
+	printstat(s, mesq_send_unexpected_error);
+	printstat(s, mesq_send_lb_overflow);
+	printstat(s, mesq_send_qlimit_reached);
+	printstat(s, mesq_send_amo_nacked);
+	printstat(s, mesq_send_put_nacked);
+	printstat(s, mesq_qf_not_full);
+	printstat(s, mesq_qf_locked);
+	printstat(s, mesq_qf_noop_not_full);
+	printstat(s, mesq_qf_switch_head_failed);
+	printstat(s, mesq_qf_unexpected_error);
+	printstat(s, mesq_noop_unexpected_error);
+	printstat(s, mesq_noop_lb_overflow);
+	printstat(s, mesq_noop_qlimit_reached);
+	printstat(s, mesq_noop_amo_nacked);
+	printstat(s, mesq_noop_put_nacked);
+	return 0;
+}
+
+static ssize_t statistics_write(struct file *file, const char __user *userbuf,
+				size_t count, loff_t *data)
+{
+	memset(&gru_stats, 0, sizeof(gru_stats));
+	return count;
+}
+
+static int options_show(struct seq_file *s, void *p)
+{
+	seq_printf(s, "0x%lx\n", gru_options);
+	return 0;
+}
+
+static ssize_t options_write(struct file *file, const char __user *userbuf,
+			     size_t count, loff_t *data)
+{
+	unsigned long val;
+	char buf[80];
+
+	if (copy_from_user
+	    (buf, userbuf, count < sizeof(buf) ? count : sizeof(buf)))
+		return -EFAULT;
+	if (!strict_strtoul(buf, 10, &val))
+		gru_options = val;
+
+	return count;
+}
+
+static int cch_seq_show(struct seq_file *file, void *data)
+{
+	long gid = *(long *)data;
+	int i;
+	struct gru_state *gru = GID_TO_GRU(gid);
+	struct gru_thread_state *ts;
+	const char *mode[] = { "??", "UPM", "INTR", "OS_POLL" };
+
+	if (gid == 0)
+		seq_printf(file, "#%5s%5s%6s%9s%6s%8s%8s\n", "gid", "bid",
+			   "ctx#", "pid", "cbrs", "dsbytes", "mode");
+	if (gru)
+		for (i = 0; i < GRU_NUM_CCH; i++) {
+			ts = gru->gs_gts[i];
+			if (!ts)
+				continue;
+			seq_printf(file, " %5d%5d%6d%9d%6d%8d%8s\n",
+				   gru->gs_gid, gru->gs_blade_id, i,
+				   ts->ts_tgid_owner,
+				   ts->ts_cbr_au_count * GRU_CBR_AU_SIZE,
+				   ts->ts_cbr_au_count * GRU_DSR_AU_BYTES,
+				   mode[ts->ts_user_options &
+					GRU_OPT_MISS_MASK]);
+		}
+
+	return 0;
+}
+
+static int gru_seq_show(struct seq_file *file, void *data)
+{
+	long gid = *(long *)data, ctxfree, cbrfree, dsrfree;
+	struct gru_state *gru = GID_TO_GRU(gid);
+
+	if (gid == 0) {
+		seq_printf(file, "#%5s%5s%7s%6s%6s%8s%6s%6s\n", "gid", "nid",
+			   "ctx", "cbr", "dsr", "ctx", "cbr", "dsr");
+		seq_printf(file, "#%5s%5s%7s%6s%6s%8s%6s%6s\n", "", "", "busy",
+			   "busy", "busy", "free", "free", "free");
+	}
+	if (gru) {
+		ctxfree = GRU_NUM_CCH - gru->gs_active_contexts;
+		cbrfree = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE;
+		dsrfree = hweight64(gru->gs_dsr_map) * GRU_DSR_AU_BYTES;
+		seq_printf(file, " %5d%5d%7ld%6ld%6ld%8ld%6ld%6ld\n",
+			   gru->gs_gid, gru->gs_blade_id, GRU_NUM_CCH - ctxfree,
+			   GRU_NUM_CBE - cbrfree, GRU_NUM_DSR_BYTES - dsrfree,
+			   ctxfree, cbrfree, dsrfree);
+	}
+
+	return 0;
+}
+
+static void seq_stop(struct seq_file *file, void *data)
+{
+}
+
+static void *seq_start(struct seq_file *file, loff_t *gid)
+{
+	if (*gid < GRU_MAX_GRUS)
+		return gid;
+	return NULL;
+}
+
+static void *seq_next(struct seq_file *file, void *data, loff_t *gid)
+{
+	(*gid)++;
+	if (*gid < GRU_MAX_GRUS)
+		return gid;
+	return NULL;
+}
+
+static const struct seq_operations cch_seq_ops = {
+	.start	= seq_start,
+	.next	= seq_next,
+	.stop	= seq_stop,
+	.show	= cch_seq_show
+};
+
+static const struct seq_operations gru_seq_ops = {
+	.start	= seq_start,
+	.next	= seq_next,
+	.stop	= seq_stop,
+	.show	= gru_seq_show
+};
+
+static int statistics_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, statistics_show, NULL);
+}
+
+static int options_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, options_show, NULL);
+}
+
+static int cch_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &cch_seq_ops);
+}
+
+static int gru_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &gru_seq_ops);
+}
+
+/* *INDENT-OFF* */
+static const struct file_operations statistics_fops = {
+	.open 		= statistics_open,
+	.read 		= seq_read,
+	.write 		= statistics_write,
+	.llseek 	= seq_lseek,
+	.release 	= single_release,
+};
+
+static const struct file_operations options_fops = {
+	.open 		= options_open,
+	.read 		= seq_read,
+	.write 		= options_write,
+	.llseek 	= seq_lseek,
+	.release 	= single_release,
+};
+
+static const struct file_operations cch_fops = {
+	.open 		= cch_open,
+	.read 		= seq_read,
+	.llseek 	= seq_lseek,
+	.release 	= seq_release,
+};
+static const struct file_operations gru_fops = {
+	.open 		= gru_open,
+	.read 		= seq_read,
+	.llseek 	= seq_lseek,
+	.release 	= seq_release,
+};
+
+static struct proc_entry {
+	char *name;
+	int mode;
+	const struct file_operations *fops;
+	struct proc_dir_entry *entry;
+} proc_files[] = {
+	{"statistics", 0644, &statistics_fops},
+	{"debug_options", 0644, &options_fops},
+	{"cch_status", 0444, &cch_fops},
+	{"gru_status", 0444, &gru_fops},
+	{NULL}
+};
+/* *INDENT-ON* */
+
+static struct proc_dir_entry *proc_gru __read_mostly;
+
+static int create_proc_file(struct proc_entry *p)
+{
+	p->entry = create_proc_entry(p->name, p->mode, proc_gru);
+	if (!p->entry)
+		return -1;
+	p->entry->proc_fops = p->fops;
+	return 0;
+}
+
+static void delete_proc_files(void)
+{
+	struct proc_entry *p;
+
+	if (proc_gru) {
+		for (p = proc_files; p->name; p++)
+			if (p->entry)
+				remove_proc_entry(p->name, proc_gru);
+		remove_proc_entry("gru", NULL);
+	}
+}
+
+int gru_proc_init(void)
+{
+	struct proc_entry *p;
+
+	proc_mkdir("sgi_uv", NULL);
+	proc_gru = proc_mkdir("sgi_uv/gru", NULL);
+
+	for (p = proc_files; p->name; p++)
+		if (create_proc_file(p))
+			goto err;
+	return 0;
+
+err:
+	delete_proc_files();
+	return -1;
+}
+
+void gru_proc_exit(void)
+{
+	delete_proc_files();
+}
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
new file mode 100644
index 0000000..4251018
--- /dev/null
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -0,0 +1,609 @@
+/*
+ * SN Platform GRU Driver
+ *
+ *            GRU DRIVER TABLES, MACROS, externs, etc
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __GRUTABLES_H__
+#define __GRUTABLES_H__
+
+/*
+ * GRU Chiplet:
+ *   The GRU is a user addressible memory accelerator. It provides
+ *   several forms of load, store, memset, bcopy instructions. In addition, it
+ *   contains special instructions for AMOs, sending messages to message
+ *   queues, etc.
+ *
+ *   The GRU is an integral part of the node controller. It connects
+ *   directly to the cpu socket. In its current implementation, there are 2
+ *   GRU chiplets in the node controller on each blade (~node).
+ *
+ *   The entire GRU memory space is fully coherent and cacheable by the cpus.
+ *
+ *   Each GRU chiplet has a physical memory map that looks like the following:
+ *
+ *   	+-----------------+
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	|/////////////////|
+ *   	+-----------------+
+ *   	|  system control |
+ *   	+-----------------+        _______ +-------------+
+ *   	|/////////////////|       /        |             |
+ *   	|/////////////////|      /         |             |
+ *   	|/////////////////|     /          | instructions|
+ *   	|/////////////////|    /           |             |
+ *   	|/////////////////|   /            |             |
+ *   	|/////////////////|  /             |-------------|
+ *   	|/////////////////| /              |             |
+ *   	+-----------------+                |             |
+ *   	|   context 15    |                |  data       |
+ *   	+-----------------+                |             |
+ *   	|    ......       | \              |             |
+ *   	+-----------------+  \____________ +-------------+
+ *   	|   context 1     |
+ *   	+-----------------+
+ *   	|   context 0     |
+ *   	+-----------------+
+ *
+ *   Each of the "contexts" is a chunk of memory that can be mmaped into user
+ *   space. The context consists of 2 parts:
+ *
+ *  	- an instruction space that can be directly accessed by the user
+ *  	  to issue GRU instructions and to check instruction status.
+ *
+ *  	- a data area that acts as normal RAM.
+ *
+ *   User instructions contain virtual addresses of data to be accessed by the
+ *   GRU. The GRU contains a TLB that is used to convert these user virtual
+ *   addresses to physical addresses.
+ *
+ *   The "system control" area of the GRU chiplet is used by the kernel driver
+ *   to manage user contexts and to perform functions such as TLB dropin and
+ *   purging.
+ *
+ *   One context may be reserved for the kernel and used for cross-partition
+ *   communication. The GRU will also be used to asynchronously zero out
+ *   large blocks of memory (not currently implemented).
+ *
+ *
+ * Tables:
+ *
+ * 	VDATA-VMA Data		- Holds a few parameters. Head of linked list of
+ * 				  GTS tables for threads using the GSEG
+ * 	GTS - Gru Thread State  - contains info for managing a GSEG context. A
+ * 				  GTS is allocated for each thread accessing a
+ * 				  GSEG.
+ *     	GTD - GRU Thread Data   - contains shadow copy of GRU data when GSEG is
+ *     				  not loaded into a GRU
+ *	GMS - GRU Memory Struct - Used to manage TLB shootdowns. Tracks GRUs
+ *				  where a GSEG has been loaded. Similar to
+ *				  an mm_struct but for GRU.
+ *
+ *	GS  - GRU State 	- Used to manage the state of a GRU chiplet
+ *	BS  - Blade State	- Used to manage state of all GRU chiplets
+ *				  on a blade
+ *
+ *
+ *  Normal task tables for task using GRU.
+ *  		- 2 threads in process
+ *  		- 2 GSEGs open in process
+ *  		- GSEG1 is being used by both threads
+ *  		- GSEG2 is used only by thread 2
+ *
+ *       task -->|
+ *       task ---+---> mm ->------ (notifier) -------+-> gms
+ *                     |                             |
+ *                     |--> vma -> vdata ---> gts--->|		GSEG1 (thread1)
+ *                     |                  |          |
+ *                     |                  +-> gts--->|		GSEG1 (thread2)
+ *                     |                             |
+ *                     |--> vma -> vdata ---> gts--->|		GSEG2 (thread2)
+ *                     .
+ *                     .
+ *
+ *  GSEGs are marked DONTCOPY on fork
+ *
+ * At open
+ * 	file.private_data -> NULL
+ *
+ * At mmap,
+ * 	vma -> vdata
+ *
+ * After gseg reference
+ * 	vma -> vdata ->gts
+ *
+ * After fork
+ *   parent
+ * 	vma -> vdata -> gts
+ *   child
+ * 	(vma is not copied)
+ *
+ */
+
+#include <linux/rmap.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/mmu_notifier.h>
+#include "gru.h"
+#include "gruhandles.h"
+
+extern struct gru_stats_s gru_stats;
+extern struct gru_blade_state *gru_base[];
+extern unsigned long gru_start_paddr, gru_end_paddr;
+
+#define GRU_MAX_BLADES		MAX_NUMNODES
+#define GRU_MAX_GRUS		(GRU_MAX_BLADES * GRU_CHIPLETS_PER_BLADE)
+
+#define GRU_DRIVER_ID_STR	"SGI GRU Device Driver"
+#define GRU_DRIVER_VERSION_STR	"0.80"
+
+/*
+ * GRU statistics.
+ */
+struct gru_stats_s {
+	atomic_long_t vdata_alloc;
+	atomic_long_t vdata_free;
+	atomic_long_t gts_alloc;
+	atomic_long_t gts_free;
+	atomic_long_t vdata_double_alloc;
+	atomic_long_t gts_double_allocate;
+	atomic_long_t assign_context;
+	atomic_long_t assign_context_failed;
+	atomic_long_t free_context;
+	atomic_long_t load_context;
+	atomic_long_t unload_context;
+	atomic_long_t steal_context;
+	atomic_long_t steal_context_failed;
+	atomic_long_t nopfn;
+	atomic_long_t break_cow;
+	atomic_long_t asid_new;
+	atomic_long_t asid_next;
+	atomic_long_t asid_wrap;
+	atomic_long_t asid_reuse;
+	atomic_long_t intr;
+	atomic_long_t call_os;
+	atomic_long_t call_os_check_for_bug;
+	atomic_long_t call_os_wait_queue;
+	atomic_long_t user_flush_tlb;
+	atomic_long_t user_unload_context;
+	atomic_long_t user_exception;
+	atomic_long_t set_task_slice;
+	atomic_long_t migrate_check;
+	atomic_long_t migrated_retarget;
+	atomic_long_t migrated_unload;
+	atomic_long_t migrated_unload_delay;
+	atomic_long_t migrated_nopfn_retarget;
+	atomic_long_t migrated_nopfn_unload;
+	atomic_long_t tlb_dropin;
+	atomic_long_t tlb_dropin_fail_no_asid;
+	atomic_long_t tlb_dropin_fail_upm;
+	atomic_long_t tlb_dropin_fail_invalid;
+	atomic_long_t tlb_dropin_fail_range_active;
+	atomic_long_t tlb_dropin_fail_idle;
+	atomic_long_t tlb_dropin_fail_fmm;
+	atomic_long_t mmu_invalidate_range;
+	atomic_long_t mmu_invalidate_page;
+	atomic_long_t mmu_clear_flush_young;
+	atomic_long_t flush_tlb;
+	atomic_long_t flush_tlb_gru;
+	atomic_long_t flush_tlb_gru_tgh;
+	atomic_long_t flush_tlb_gru_zero_asid;
+
+	atomic_long_t copy_gpa;
+
+	atomic_long_t mesq_receive;
+	atomic_long_t mesq_receive_none;
+	atomic_long_t mesq_send;
+	atomic_long_t mesq_send_failed;
+	atomic_long_t mesq_noop;
+	atomic_long_t mesq_send_unexpected_error;
+	atomic_long_t mesq_send_lb_overflow;
+	atomic_long_t mesq_send_qlimit_reached;
+	atomic_long_t mesq_send_amo_nacked;
+	atomic_long_t mesq_send_put_nacked;
+	atomic_long_t mesq_qf_not_full;
+	atomic_long_t mesq_qf_locked;
+	atomic_long_t mesq_qf_noop_not_full;
+	atomic_long_t mesq_qf_switch_head_failed;
+	atomic_long_t mesq_qf_unexpected_error;
+	atomic_long_t mesq_noop_unexpected_error;
+	atomic_long_t mesq_noop_lb_overflow;
+	atomic_long_t mesq_noop_qlimit_reached;
+	atomic_long_t mesq_noop_amo_nacked;
+	atomic_long_t mesq_noop_put_nacked;
+
+};
+
+#define OPT_DPRINT	1
+#define OPT_STATS	2
+#define GRU_QUICKLOOK	4
+
+
+#define IRQ_GRU			110	/* Starting IRQ number for interrupts */
+
+/* Delay in jiffies between attempts to assign a GRU context */
+#define GRU_ASSIGN_DELAY	((HZ * 20) / 1000)
+
+/*
+ * If a process has it's context stolen, min delay in jiffies before trying to
+ * steal a context from another process.
+ */
+#define GRU_STEAL_DELAY		((HZ * 200) / 1000)
+
+#define STAT(id)	do {						\
+				if (gru_options & OPT_STATS)		\
+					atomic_long_inc(&gru_stats.id);	\
+			} while (0)
+
+#ifdef CONFIG_SGI_GRU_DEBUG
+#define gru_dbg(dev, fmt, x...)						\
+	do {								\
+		if (gru_options & OPT_DPRINT)				\
+			dev_dbg(dev, "%s: " fmt, __func__, x);		\
+	} while (0)
+#else
+#define gru_dbg(x...)
+#endif
+
+/*-----------------------------------------------------------------------------
+ * ASID management
+ */
+#define MAX_ASID	0xfffff0
+#define MIN_ASID	8
+#define ASID_INC	8	/* number of regions */
+
+/* Generate a GRU asid value from a GRU base asid & a virtual address. */
+#if defined CONFIG_IA64
+#define VADDR_HI_BIT		64
+#define GRUREGION(addr)		((addr) >> (VADDR_HI_BIT - 3) & 3)
+#elif defined __x86_64
+#define VADDR_HI_BIT		48
+#define GRUREGION(addr)		(0)		/* ZZZ could do better */
+#else
+#error "Unsupported architecture"
+#endif
+#define GRUASID(asid, addr)	((asid) + GRUREGION(addr))
+
+/*------------------------------------------------------------------------------
+ *  File & VMS Tables
+ */
+
+struct gru_state;
+
+/*
+ * This structure is pointed to from the mmstruct via the notifier pointer.
+ * There is one of these per address space.
+ */
+struct gru_mm_tracker {
+	unsigned int		mt_asid_gen;	/* ASID wrap count */
+	int			mt_asid;	/* current base ASID for gru */
+	unsigned short		mt_ctxbitmap;	/* bitmap of contexts using
+						   asid */
+};
+
+struct gru_mm_struct {
+	struct mmu_notifier	ms_notifier;
+	atomic_t		ms_refcnt;
+	spinlock_t		ms_asid_lock;	/* protects ASID assignment */
+	atomic_t		ms_range_active;/* num range_invals active */
+	char			ms_released;
+	wait_queue_head_t	ms_wait_queue;
+	DECLARE_BITMAP(ms_asidmap, GRU_MAX_GRUS);
+	struct gru_mm_tracker	ms_asids[GRU_MAX_GRUS];
+};
+
+/*
+ * One of these structures is allocated when a GSEG is mmaped. The
+ * structure is pointed to by the vma->vm_private_data field in the vma struct.
+ */
+struct gru_vma_data {
+	spinlock_t		vd_lock;	/* Serialize access to vma */
+	struct list_head	vd_head;	/* head of linked list of gts */
+	long			vd_user_options;/* misc user option flags */
+	int			vd_cbr_au_count;
+	int			vd_dsr_au_count;
+};
+
+/*
+ * One of these is allocated for each thread accessing a mmaped GRU. A linked
+ * list of these structure is hung off the struct gru_vma_data in the mm_struct.
+ */
+struct gru_thread_state {
+	struct list_head	ts_next;	/* list - head at vma-private */
+	struct mutex		ts_ctxlock;	/* load/unload CTX lock */
+	struct mm_struct	*ts_mm;		/* mm currently mapped to
+						   context */
+	struct vm_area_struct	*ts_vma;	/* vma of GRU context */
+	struct gru_state	*ts_gru;	/* GRU where the context is
+						   loaded */
+	struct gru_mm_struct	*ts_gms;	/* asid & ioproc struct */
+	unsigned long		ts_cbr_map;	/* map of allocated CBRs */
+	unsigned long		ts_dsr_map;	/* map of allocated DATA
+						   resources */
+	unsigned long		ts_steal_jiffies;/* jiffies when context last
+						    stolen */
+	long			ts_user_options;/* misc user option flags */
+	pid_t			ts_tgid_owner;	/* task that is using the
+						   context - for migration */
+	int			ts_tsid;	/* thread that owns the
+						   structure */
+	int			ts_tlb_int_select;/* target cpu if interrupts
+						     enabled */
+	int			ts_ctxnum;	/* context number where the
+						   context is loaded */
+	atomic_t		ts_refcnt;	/* reference count GTS */
+	unsigned char		ts_dsr_au_count;/* Number of DSR resources
+						   required for contest */
+	unsigned char		ts_cbr_au_count;/* Number of CBR resources
+						   required for contest */
+	char			ts_force_unload;/* force context to be unloaded
+						   after migration */
+	char			ts_cbr_idx[GRU_CBR_AU];/* CBR numbers of each
+							  allocated CB */
+	unsigned long		ts_gdata[0];	/* save area for GRU data (CB,
+						   DS, CBE) */
+};
+
+/*
+ * Threaded programs actually allocate an array of GSEGs when a context is
+ * created. Each thread uses a separate GSEG. TSID is the index into the GSEG
+ * array.
+ */
+#define TSID(a, v)		(((a) - (v)->vm_start) / GRU_GSEG_PAGESIZE)
+#define UGRUADDR(gts)		((gts)->ts_vma->vm_start +		\
+					(gts)->ts_tsid * GRU_GSEG_PAGESIZE)
+
+#define NULLCTX			(-1)	/* if context not loaded into GRU */
+
+/*-----------------------------------------------------------------------------
+ *  GRU State Tables
+ */
+
+/*
+ * One of these exists for each GRU chiplet.
+ */
+struct gru_state {
+	struct gru_blade_state	*gs_blade;		/* GRU state for entire
+							   blade */
+	unsigned long		gs_gru_base_paddr;	/* Physical address of
+							   gru segments (64) */
+	void			*gs_gru_base_vaddr;	/* Virtual address of
+							   gru segments (64) */
+	unsigned char		gs_gid;			/* unique GRU number */
+	unsigned char		gs_tgh_local_shift;	/* used to pick TGH for
+							   local flush */
+	unsigned char		gs_tgh_first_remote;	/* starting TGH# for
+							   remote flush */
+	unsigned short		gs_blade_id;		/* blade of GRU */
+	spinlock_t		gs_asid_lock;		/* lock used for
+							   assigning asids */
+	spinlock_t		gs_lock;		/* lock used for
+							   assigning contexts */
+
+	/* -- the following are protected by the gs_asid_lock spinlock ---- */
+	unsigned int		gs_asid;		/* Next availe ASID */
+	unsigned int		gs_asid_limit;		/* Limit of available
+							   ASIDs */
+	unsigned int		gs_asid_gen;		/* asid generation.
+							   Inc on wrap */
+
+	/* --- the following fields are protected by the gs_lock spinlock --- */
+	unsigned long		gs_context_map;		/* bitmap to manage
+							   contexts in use */
+	unsigned long		gs_cbr_map;		/* bitmap to manage CB
+							   resources */
+	unsigned long		gs_dsr_map;		/* bitmap used to manage
+							   DATA resources */
+	unsigned int		gs_reserved_cbrs;	/* Number of kernel-
+							   reserved cbrs */
+	unsigned int		gs_reserved_dsr_bytes;	/* Bytes of kernel-
+							   reserved dsrs */
+	unsigned short		gs_active_contexts;	/* number of contexts
+							   in use */
+	struct gru_thread_state	*gs_gts[GRU_NUM_CCH];	/* GTS currently using
+							   the context */
+};
+
+/*
+ * This structure contains the GRU state for all the GRUs on a blade.
+ */
+struct gru_blade_state {
+	void			*kernel_cb;		/* First kernel
+							   reserved cb */
+	void			*kernel_dsr;		/* First kernel
+							   reserved DSR */
+	/* ---- the following are protected by the bs_lock spinlock ---- */
+	spinlock_t		bs_lock;		/* lock used for
+							   stealing contexts */
+	int			bs_lru_ctxnum;		/* STEAL - last context
+							   stolen */
+	struct gru_state	*bs_lru_gru;		/* STEAL - last gru
+							   stolen */
+
+	struct gru_state	bs_grus[GRU_CHIPLETS_PER_BLADE];
+};
+
+/*-----------------------------------------------------------------------------
+ * Address Primitives
+ */
+#define get_tfm_for_cpu(g, c)						\
+	((struct gru_tlb_fault_map *)get_tfm((g)->gs_gru_base_vaddr, (c)))
+#define get_tfh_by_index(g, i)						\
+	((struct gru_tlb_fault_handle *)get_tfh((g)->gs_gru_base_vaddr, (i)))
+#define get_tgh_by_index(g, i)						\
+	((struct gru_tlb_global_handle *)get_tgh((g)->gs_gru_base_vaddr, (i)))
+#define get_cbe_by_index(g, i)						\
+	((struct gru_control_block_extended *)get_cbe((g)->gs_gru_base_vaddr,\
+			(i)))
+
+/*-----------------------------------------------------------------------------
+ * Useful Macros
+ */
+
+/* Given a blade# & chiplet#, get a pointer to the GRU */
+#define get_gru(b, c)		(&gru_base[b]->bs_grus[c])
+
+/* Number of bytes to save/restore when unloading/loading GRU contexts */
+#define DSR_BYTES(dsr)		((dsr) * GRU_DSR_AU_BYTES)
+#define CBR_BYTES(cbr)		((cbr) * GRU_HANDLE_BYTES * GRU_CBR_AU_SIZE * 2)
+
+/* Convert a user CB number to the actual CBRNUM */
+#define thread_cbr_number(gts, n) ((gts)->ts_cbr_idx[(n) / GRU_CBR_AU_SIZE] \
+				  * GRU_CBR_AU_SIZE + (n) % GRU_CBR_AU_SIZE)
+
+/* Convert a gid to a pointer to the GRU */
+#define GID_TO_GRU(gid)							\
+	(gru_base[(gid) / GRU_CHIPLETS_PER_BLADE] ?			\
+		(&gru_base[(gid) / GRU_CHIPLETS_PER_BLADE]->		\
+			bs_grus[(gid) % GRU_CHIPLETS_PER_BLADE]) :	\
+	 NULL)
+
+/* Scan all active GRUs in a GRU bitmap */
+#define for_each_gru_in_bitmap(gid, map)				\
+	for ((gid) = find_first_bit((map), GRU_MAX_GRUS); (gid) < GRU_MAX_GRUS;\
+		(gid)++, (gid) = find_next_bit((map), GRU_MAX_GRUS, (gid)))
+
+/* Scan all active GRUs on a specific blade */
+#define for_each_gru_on_blade(gru, nid, i)				\
+	for ((gru) = gru_base[nid]->bs_grus, (i) = 0;			\
+			(i) < GRU_CHIPLETS_PER_BLADE;			\
+			(i)++, (gru)++)
+
+/* Scan all active GTSs on a gru. Note: must hold ss_lock to use this macro. */
+#define for_each_gts_on_gru(gts, gru, ctxnum)				\
+	for ((ctxnum) = 0; (ctxnum) < GRU_NUM_CCH; (ctxnum)++)		\
+		if (((gts) = (gru)->gs_gts[ctxnum]))
+
+/* Scan each CBR whose bit is set in a TFM (or copy of) */
+#define for_each_cbr_in_tfm(i, map)					\
+	for ((i) = find_first_bit(map, GRU_NUM_CBE);			\
+			(i) < GRU_NUM_CBE;				\
+			(i)++, (i) = find_next_bit(map, GRU_NUM_CBE, i))
+
+/* Scan each CBR in a CBR bitmap. Note: multiple CBRs in an allocation unit */
+#define for_each_cbr_in_allocation_map(i, map, k)			\
+	for ((k) = find_first_bit(map, GRU_CBR_AU); (k) < GRU_CBR_AU;	\
+			(k) = find_next_bit(map, GRU_CBR_AU, (k) + 1)) 	\
+		for ((i) = (k)*GRU_CBR_AU_SIZE;				\
+				(i) < ((k) + 1) * GRU_CBR_AU_SIZE; (i)++)
+
+/* Scan each DSR in a DSR bitmap. Note: multiple DSRs in an allocation unit */
+#define for_each_dsr_in_allocation_map(i, map, k)			\
+	for ((k) = find_first_bit((const unsigned long *)map, GRU_DSR_AU);\
+			(k) < GRU_DSR_AU;				\
+			(k) = find_next_bit((const unsigned long *)map,	\
+					  GRU_DSR_AU, (k) + 1))		\
+		for ((i) = (k) * GRU_DSR_AU_CL;				\
+				(i) < ((k) + 1) * GRU_DSR_AU_CL; (i)++)
+
+#define gseg_physical_address(gru, ctxnum)				\
+		((gru)->gs_gru_base_paddr + ctxnum * GRU_GSEG_STRIDE)
+#define gseg_virtual_address(gru, ctxnum)				\
+		((gru)->gs_gru_base_vaddr + ctxnum * GRU_GSEG_STRIDE)
+
+/*-----------------------------------------------------------------------------
+ * Lock / Unlock GRU handles
+ * 	Use the "delresp" bit in the handle as a "lock" bit.
+ */
+
+/* Lock hierarchy checking enabled only in emulator */
+
+static inline void __lock_handle(void *h)
+{
+	while (test_and_set_bit(1, h))
+		cpu_relax();
+}
+
+static inline void __unlock_handle(void *h)
+{
+	clear_bit(1, h);
+}
+
+static inline void lock_cch_handle(struct gru_context_configuration_handle *cch)
+{
+	__lock_handle(cch);
+}
+
+static inline void unlock_cch_handle(struct gru_context_configuration_handle
+				     *cch)
+{
+	__unlock_handle(cch);
+}
+
+static inline void lock_tgh_handle(struct gru_tlb_global_handle *tgh)
+{
+	__lock_handle(tgh);
+}
+
+static inline void unlock_tgh_handle(struct gru_tlb_global_handle *tgh)
+{
+	__unlock_handle(tgh);
+}
+
+/*-----------------------------------------------------------------------------
+ * Function prototypes & externs
+ */
+struct gru_unload_context_req;
+
+extern struct vm_operations_struct gru_vm_ops;
+extern struct device *grudev;
+
+extern struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma,
+				int tsid);
+extern struct gru_thread_state *gru_find_thread_state(struct vm_area_struct
+				*vma, int tsid);
+extern struct gru_thread_state *gru_alloc_thread_state(struct vm_area_struct
+				*vma, int tsid);
+extern void gru_unload_context(struct gru_thread_state *gts, int savestate);
+extern void gts_drop(struct gru_thread_state *gts);
+extern void gru_tgh_flush_init(struct gru_state *gru);
+extern int gru_kservices_init(struct gru_state *gru);
+extern irqreturn_t gru_intr(int irq, void *dev_id);
+extern int gru_handle_user_call_os(unsigned long address);
+extern int gru_user_flush_tlb(unsigned long arg);
+extern int gru_user_unload_context(unsigned long arg);
+extern int gru_get_exception_detail(unsigned long arg);
+extern int gru_set_task_slice(long address);
+extern int gru_cpu_fault_map_id(void);
+extern struct vm_area_struct *gru_find_vma(unsigned long vaddr);
+extern void gru_flush_all_tlb(struct gru_state *gru);
+extern int gru_proc_init(void);
+extern void gru_proc_exit(void);
+
+extern unsigned long gru_reserve_cb_resources(struct gru_state *gru,
+		int cbr_au_count, char *cbmap);
+extern unsigned long gru_reserve_ds_resources(struct gru_state *gru,
+		int dsr_au_count, char *dsmap);
+extern int gru_fault(struct vm_area_struct *, struct vm_fault *vmf);
+extern struct gru_mm_struct *gru_register_mmu_notifier(void);
+extern void gru_drop_mmu_notifier(struct gru_mm_struct *gms);
+
+extern void gru_flush_tlb_range(struct gru_mm_struct *gms, unsigned long start,
+					unsigned long len);
+
+extern unsigned long gru_options;
+
+#endif /* __GRUTABLES_H__ */
diff --git a/drivers/misc/sgi-gru/grutlbpurge.c b/drivers/misc/sgi-gru/grutlbpurge.c
new file mode 100644
index 0000000..bcfd542
--- /dev/null
+++ b/drivers/misc/sgi-gru/grutlbpurge.c
@@ -0,0 +1,372 @@
+/*
+ * SN Platform GRU Driver
+ *
+ * 		MMUOPS callbacks  + TLB flushing
+ *
+ * This file handles emu notifier callbacks from the core kernel. The callbacks
+ * are used to update the TLB in the GRU as a result of changes in the
+ * state of a process address space. This file also handles TLB invalidates
+ * from the GRU driver.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/hugetlb.h>
+#include <linux/delay.h>
+#include <linux/timex.h>
+#include <linux/delay.h>
+#include <linux/srcu.h>
+#include <asm/processor.h>
+#include "gru.h"
+#include "grutables.h"
+#include <asm/uv/uv_hub.h>
+
+#define gru_random()	get_cycles()
+
+/* ---------------------------------- TLB Invalidation functions --------
+ * get_tgh_handle
+ *
+ * Find a TGH to use for issuing a TLB invalidate. For GRUs that are on the
+ * local blade, use a fixed TGH that is a function of the blade-local cpu
+ * number. Normally, this TGH is private to the cpu & no contention occurs for
+ * the TGH. For offblade GRUs, select a random TGH in the range above the
+ * private TGHs. A spinlock is required to access this TGH & the lock must be
+ * released when the invalidate is completes. This sucks, but it is the best we
+ * can do.
+ *
+ * Note that the spinlock is IN the TGH handle so locking does not involve
+ * additional cache lines.
+ *
+ */
+static inline int get_off_blade_tgh(struct gru_state *gru)
+{
+	int n;
+
+	n = GRU_NUM_TGH - gru->gs_tgh_first_remote;
+	n = gru_random() % n;
+	n += gru->gs_tgh_first_remote;
+	return n;
+}
+
+static inline int get_on_blade_tgh(struct gru_state *gru)
+{
+	return uv_blade_processor_id() >> gru->gs_tgh_local_shift;
+}
+
+static struct gru_tlb_global_handle *get_lock_tgh_handle(struct gru_state
+							 *gru)
+{
+	struct gru_tlb_global_handle *tgh;
+	int n;
+
+	preempt_disable();
+	if (uv_numa_blade_id() == gru->gs_blade_id)
+		n = get_on_blade_tgh(gru);
+	else
+		n = get_off_blade_tgh(gru);
+	tgh = get_tgh_by_index(gru, n);
+	lock_tgh_handle(tgh);
+
+	return tgh;
+}
+
+static void get_unlock_tgh_handle(struct gru_tlb_global_handle *tgh)
+{
+	unlock_tgh_handle(tgh);
+	preempt_enable();
+}
+
+/*
+ * gru_flush_tlb_range
+ *
+ * General purpose TLB invalidation function. This function scans every GRU in
+ * the ENTIRE system (partition) looking for GRUs where the specified MM has
+ * been accessed by the GRU. For each GRU found, the TLB must be invalidated OR
+ * the ASID invalidated. Invalidating an ASID causes a new ASID to be assigned
+ * on the next fault. This effectively flushes the ENTIRE TLB for the MM at the
+ * cost of (possibly) a large number of future TLBmisses.
+ *
+ * The current algorithm is optimized based on the following (somewhat true)
+ * assumptions:
+ * 	- GRU contexts are not loaded into a GRU unless a reference is made to
+ * 	  the data segment or control block (this is true, not an assumption).
+ * 	  If a DS/CB is referenced, the user will also issue instructions that
+ * 	  cause TLBmisses. It is not necessary to optimize for the case where
+ * 	  contexts are loaded but no instructions cause TLB misses. (I know
+ * 	  this will happen but I'm not optimizing for it).
+ * 	- GRU instructions to invalidate TLB entries are SLOOOOWWW - normally
+ * 	  a few usec but in unusual cases, it could be longer. Avoid if
+ * 	  possible.
+ * 	- intrablade process migration between cpus is not frequent but is
+ * 	  common.
+ * 	- a GRU context is not typically migrated to a different GRU on the
+ * 	  blade because of intrablade migration
+ *	- interblade migration is rare. Processes migrate their GRU context to
+ *	  the new blade.
+ *	- if interblade migration occurs, migration back to the original blade
+ *	  is very very rare (ie., no optimization for this case)
+ *	- most GRU instruction operate on a subset of the user REGIONS. Code
+ *	  & shared library regions are not likely targets of GRU instructions.
+ *
+ * To help improve the efficiency of TLB invalidation, the GMS data
+ * structure is maintained for EACH address space (MM struct). The GMS is
+ * also the structure that contains the pointer to the mmu callout
+ * functions. This structure is linked to the mm_struct for the address space
+ * using the mmu "register" function. The mmu interfaces are used to
+ * provide the callbacks for TLB invalidation. The GMS contains:
+ *
+ * 	- asid[maxgrus] array. ASIDs are assigned to a GRU when a context is
+ * 	  loaded into the GRU.
+ * 	- asidmap[maxgrus]. bitmap to make it easier to find non-zero asids in
+ * 	  the above array
+ *	- ctxbitmap[maxgrus]. Indicates the contexts that are currently active
+ *	  in the GRU for the address space. This bitmap must be passed to the
+ *	  GRU to do an invalidate.
+ *
+ * The current algorithm for invalidating TLBs is:
+ * 	- scan the asidmap for GRUs where the context has been loaded, ie,
+ * 	  asid is non-zero.
+ * 	- for each gru found:
+ * 		- if the ctxtmap is non-zero, there are active contexts in the
+ * 		  GRU. TLB invalidate instructions must be issued to the GRU.
+ *		- if the ctxtmap is zero, no context is active. Set the ASID to
+ *		  zero to force a full TLB invalidation. This is fast but will
+ *		  cause a lot of TLB misses if the context is reloaded onto the
+ *		  GRU
+ *
+ */
+
+void gru_flush_tlb_range(struct gru_mm_struct *gms, unsigned long start,
+			 unsigned long len)
+{
+	struct gru_state *gru;
+	struct gru_mm_tracker *asids;
+	struct gru_tlb_global_handle *tgh;
+	unsigned long num;
+	int grupagesize, pagesize, pageshift, gid, asid;
+
+	/* ZZZ TODO - handle huge pages */
+	pageshift = PAGE_SHIFT;
+	pagesize = (1UL << pageshift);
+	grupagesize = GRU_PAGESIZE(pageshift);
+	num = min(((len + pagesize - 1) >> pageshift), GRUMAXINVAL);
+
+	STAT(flush_tlb);
+	gru_dbg(grudev, "gms %p, start 0x%lx, len 0x%lx, asidmap 0x%lx\n", gms,
+		start, len, gms->ms_asidmap[0]);
+
+	spin_lock(&gms->ms_asid_lock);
+	for_each_gru_in_bitmap(gid, gms->ms_asidmap) {
+		STAT(flush_tlb_gru);
+		gru = GID_TO_GRU(gid);
+		asids = gms->ms_asids + gid;
+		asid = asids->mt_asid;
+		if (asids->mt_ctxbitmap && asid) {
+			STAT(flush_tlb_gru_tgh);
+			asid = GRUASID(asid, start);
+			gru_dbg(grudev,
+	"  FLUSH gruid %d, asid 0x%x, num %ld, cbmap 0x%x\n",
+				gid, asid, num, asids->mt_ctxbitmap);
+			tgh = get_lock_tgh_handle(gru);
+			tgh_invalidate(tgh, start, 0, asid, grupagesize, 0,
+				       num - 1, asids->mt_ctxbitmap);
+			get_unlock_tgh_handle(tgh);
+		} else {
+			STAT(flush_tlb_gru_zero_asid);
+			asids->mt_asid = 0;
+			__clear_bit(gru->gs_gid, gms->ms_asidmap);
+			gru_dbg(grudev,
+	"  CLEARASID gruid %d, asid 0x%x, cbtmap 0x%x, asidmap 0x%lx\n",
+				gid, asid, asids->mt_ctxbitmap,
+				gms->ms_asidmap[0]);
+		}
+	}
+	spin_unlock(&gms->ms_asid_lock);
+}
+
+/*
+ * Flush the entire TLB on a chiplet.
+ */
+void gru_flush_all_tlb(struct gru_state *gru)
+{
+	struct gru_tlb_global_handle *tgh;
+
+	gru_dbg(grudev, "gru %p, gid %d\n", gru, gru->gs_gid);
+	tgh = get_lock_tgh_handle(gru);
+	tgh_invalidate(tgh, 0, ~0, 0, 1, 1, GRUMAXINVAL - 1, 0);
+	get_unlock_tgh_handle(tgh);
+	preempt_enable();
+}
+
+/*
+ * MMUOPS notifier callout functions
+ */
+static void gru_invalidate_range_start(struct mmu_notifier *mn,
+				       struct mm_struct *mm,
+				       unsigned long start, unsigned long end)
+{
+	struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+						 ms_notifier);
+
+	STAT(mmu_invalidate_range);
+	atomic_inc(&gms->ms_range_active);
+	gru_dbg(grudev, "gms %p, start 0x%lx, end 0x%lx, act %d\n", gms,
+		start, end, atomic_read(&gms->ms_range_active));
+	gru_flush_tlb_range(gms, start, end - start);
+}
+
+static void gru_invalidate_range_end(struct mmu_notifier *mn,
+				     struct mm_struct *mm, unsigned long start,
+				     unsigned long end)
+{
+	struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+						 ms_notifier);
+
+	/* ..._and_test() provides needed barrier */
+	(void)atomic_dec_and_test(&gms->ms_range_active);
+
+	wake_up_all(&gms->ms_wait_queue);
+	gru_dbg(grudev, "gms %p, start 0x%lx, end 0x%lx\n", gms, start, end);
+}
+
+static void gru_invalidate_page(struct mmu_notifier *mn, struct mm_struct *mm,
+				unsigned long address)
+{
+	struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+						 ms_notifier);
+
+	STAT(mmu_invalidate_page);
+	gru_flush_tlb_range(gms, address, PAGE_SIZE);
+	gru_dbg(grudev, "gms %p, address 0x%lx\n", gms, address);
+}
+
+static void gru_release(struct mmu_notifier *mn, struct mm_struct *mm)
+{
+	struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct,
+						 ms_notifier);
+
+	gms->ms_released = 1;
+	gru_dbg(grudev, "gms %p\n", gms);
+}
+
+
+static const struct mmu_notifier_ops gru_mmuops = {
+	.invalidate_page	= gru_invalidate_page,
+	.invalidate_range_start	= gru_invalidate_range_start,
+	.invalidate_range_end	= gru_invalidate_range_end,
+	.release		= gru_release,
+};
+
+/* Move this to the basic mmu_notifier file. But for now... */
+static struct mmu_notifier *mmu_find_ops(struct mm_struct *mm,
+			const struct mmu_notifier_ops *ops)
+{
+	struct mmu_notifier *mn, *gru_mn = NULL;
+	struct hlist_node *n;
+
+	if (mm->mmu_notifier_mm) {
+		rcu_read_lock();
+		hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list,
+					 hlist)
+		    if (mn->ops == ops) {
+			gru_mn = mn;
+			break;
+		}
+		rcu_read_unlock();
+	}
+	return gru_mn;
+}
+
+struct gru_mm_struct *gru_register_mmu_notifier(void)
+{
+	struct gru_mm_struct *gms;
+	struct mmu_notifier *mn;
+
+	mn = mmu_find_ops(current->mm, &gru_mmuops);
+	if (mn) {
+		gms = container_of(mn, struct gru_mm_struct, ms_notifier);
+		atomic_inc(&gms->ms_refcnt);
+	} else {
+		gms = kzalloc(sizeof(*gms), GFP_KERNEL);
+		if (gms) {
+			spin_lock_init(&gms->ms_asid_lock);
+			gms->ms_notifier.ops = &gru_mmuops;
+			atomic_set(&gms->ms_refcnt, 1);
+			init_waitqueue_head(&gms->ms_wait_queue);
+			__mmu_notifier_register(&gms->ms_notifier, current->mm);
+		}
+	}
+	gru_dbg(grudev, "gms %p, refcnt %d\n", gms,
+		atomic_read(&gms->ms_refcnt));
+	return gms;
+}
+
+void gru_drop_mmu_notifier(struct gru_mm_struct *gms)
+{
+	gru_dbg(grudev, "gms %p, refcnt %d, released %d\n", gms,
+		atomic_read(&gms->ms_refcnt), gms->ms_released);
+	if (atomic_dec_return(&gms->ms_refcnt) == 0) {
+		if (!gms->ms_released)
+			mmu_notifier_unregister(&gms->ms_notifier, current->mm);
+		kfree(gms);
+	}
+}
+
+/*
+ * Setup TGH parameters. There are:
+ * 	- 24 TGH handles per GRU chiplet
+ * 	- a portion (MAX_LOCAL_TGH) of the handles are reserved for
+ * 	  use by blade-local cpus
+ * 	- the rest are used by off-blade cpus. This usage is
+ * 	  less frequent than blade-local usage.
+ *
+ * For now, use 16 handles for local flushes, 8 for remote flushes. If the blade
+ * has less tan or equal to 16 cpus, each cpu has a unique handle that it can
+ * use.
+ */
+#define MAX_LOCAL_TGH	16
+
+void gru_tgh_flush_init(struct gru_state *gru)
+{
+	int cpus, shift = 0, n;
+
+	cpus = uv_blade_nr_possible_cpus(gru->gs_blade_id);
+
+	/* n = cpus rounded up to next power of 2 */
+	if (cpus) {
+		n = 1 << fls(cpus - 1);
+
+		/*
+		 * shift count for converting local cpu# to TGH index
+		 *      0 if cpus <= MAX_LOCAL_TGH,
+		 *      1 if cpus <= 2*MAX_LOCAL_TGH,
+		 *      etc
+		 */
+		shift = max(0, fls(n - 1) - fls(MAX_LOCAL_TGH - 1));
+	}
+	gru->gs_tgh_local_shift = shift;
+
+	/* first starting TGH index to use for remote purges */
+	gru->gs_tgh_first_remote = (cpus + (1 << shift) - 1) >> shift;
+
+}
diff --git a/drivers/misc/sgi-xp/Makefile b/drivers/misc/sgi-xp/Makefile
index b6e40a7..35ce285 100644
--- a/drivers/misc/sgi-xp/Makefile
+++ b/drivers/misc/sgi-xp/Makefile
@@ -3,9 +3,17 @@
 #
 
 obj-$(CONFIG_SGI_XP)		+= xp.o
-xp-y				:= xp_main.o xp_nofault.o
+xp-y				:= xp_main.o
+xp-$(CONFIG_IA64_SGI_SN2)	+= xp_sn2.o xp_nofault.o
+xp-$(CONFIG_IA64_GENERIC)	+= xp_sn2.o xp_nofault.o xp_uv.o
+xp-$(CONFIG_IA64_SGI_UV)	+= xp_uv.o
+xp-$(CONFIG_X86_64)		+= xp_uv.o
 
 obj-$(CONFIG_SGI_XP)		+= xpc.o
 xpc-y				:= xpc_main.o xpc_channel.o xpc_partition.o
+xpc-$(CONFIG_IA64_SGI_SN2)	+= xpc_sn2.o
+xpc-$(CONFIG_IA64_GENERIC)	+= xpc_sn2.o xpc_uv.o
+xpc-$(CONFIG_IA64_SGI_UV) 	+= xpc_uv.o
+xpc-$(CONFIG_X86_64)		+= xpc_uv.o
 
 obj-$(CONFIG_SGI_XP)		+= xpnet.o
diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h
index 03a87a3..859a528 100644
--- a/drivers/misc/sgi-xp/xp.h
+++ b/drivers/misc/sgi-xp/xp.h
@@ -13,11 +13,34 @@
 #ifndef _DRIVERS_MISC_SGIXP_XP_H
 #define _DRIVERS_MISC_SGIXP_XP_H
 
-#include <linux/cache.h>
-#include <linux/hardirq.h>
 #include <linux/mutex.h>
-#include <asm/sn/types.h>
-#include <asm/sn/bte.h>
+
+#ifdef CONFIG_IA64
+#include <asm/system.h>
+#include <asm/sn/arch.h>	/* defines is_shub1() and is_shub2() */
+#define is_shub()	ia64_platform_is("sn2")
+#define is_uv()		ia64_platform_is("uv")
+#endif
+#ifdef CONFIG_X86_64
+#include <asm/genapic.h>
+#define is_uv()		is_uv_system()
+#endif
+
+#ifndef is_shub1
+#define is_shub1()	0
+#endif
+
+#ifndef is_shub2
+#define is_shub2()	0
+#endif
+
+#ifndef is_shub
+#define is_shub()	0
+#endif
+
+#ifndef is_uv
+#define is_uv()		0
+#endif
 
 #ifdef USE_DBUG_ON
 #define DBUG_ON(condition)	BUG_ON(condition)
@@ -26,133 +49,56 @@
 #endif
 
 /*
- * Define the maximum number of logically defined partitions the system
- * can support. It is constrained by the maximum number of hardware
- * partitionable regions. The term 'region' in this context refers to the
- * minimum number of nodes that can comprise an access protection grouping.
- * The access protection is in regards to memory, IPI and IOI.
+ * Define the maximum number of partitions the system can possibly support.
+ * It is based on the maximum number of hardware partitionable regions. The
+ * term 'region' in this context refers to the minimum number of nodes that
+ * can comprise an access protection grouping. The access protection is in
+ * regards to memory, IPI and IOI.
  *
  * The maximum number of hardware partitionable regions is equal to the
  * maximum number of nodes in the entire system divided by the minimum number
  * of nodes that comprise an access protection grouping.
  */
-#define XP_MAX_PARTITIONS	64
-
-/*
- * Define the number of u64s required to represent all the C-brick nasids
- * as a bitmap.  The cross-partition kernel modules deal only with
- * C-brick nasids, thus the need for bitmaps which don't account for
- * odd-numbered (non C-brick) nasids.
- */
-#define XP_MAX_PHYSNODE_ID	(MAX_NUMALINK_NODES / 2)
-#define XP_NASID_MASK_BYTES	((XP_MAX_PHYSNODE_ID + 7) / 8)
-#define XP_NASID_MASK_WORDS	((XP_MAX_PHYSNODE_ID + 63) / 64)
-
-/*
- * Wrapper for bte_copy() that should it return a failure status will retry
- * the bte_copy() once in the hope that the failure was due to a temporary
- * aberration (i.e., the link going down temporarily).
- *
- * 	src - physical address of the source of the transfer.
- *	vdst - virtual address of the destination of the transfer.
- *	len - number of bytes to transfer from source to destination.
- *	mode - see bte_copy() for definition.
- *	notification - see bte_copy() for definition.
- *
- * Note: xp_bte_copy() should never be called while holding a spinlock.
- */
-static inline bte_result_t
-xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification)
-{
-	bte_result_t ret;
-	u64 pdst = ia64_tpa(vdst);
-
-	/*
-	 * Ensure that the physically mapped memory is contiguous.
-	 *
-	 * We do this by ensuring that the memory is from region 7 only.
-	 * If the need should arise to use memory from one of the other
-	 * regions, then modify the BUG_ON() statement to ensure that the
-	 * memory from that region is always physically contiguous.
-	 */
-	BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL);
-
-	ret = bte_copy(src, pdst, len, mode, notification);
-	if ((ret != BTE_SUCCESS) && BTE_ERROR_RETRY(ret)) {
-		if (!in_interrupt())
-			cond_resched();
-
-		ret = bte_copy(src, pdst, len, mode, notification);
-	}
-
-	return ret;
-}
+#define XP_MAX_NPARTITIONS_SN2	64
+#define XP_MAX_NPARTITIONS_UV	256
 
 /*
  * XPC establishes channel connections between the local partition and any
  * other partition that is currently up. Over these channels, kernel-level
  * `users' can communicate with their counterparts on the other partitions.
  *
- * The maxinum number of channels is limited to eight. For performance reasons,
- * the internal cross partition structures require sixteen bytes per channel,
- * and eight allows all of this interface-shared info to fit in one cache line.
- *
- * XPC_NCHANNELS reflects the total number of channels currently defined.
  * If the need for additional channels arises, one can simply increase
- * XPC_NCHANNELS accordingly. If the day should come where that number
- * exceeds the MAXIMUM number of channels allowed (eight), then one will need
- * to make changes to the XPC code to allow for this.
+ * XPC_MAX_NCHANNELS accordingly. If the day should come where that number
+ * exceeds the absolute MAXIMUM number of channels possible (eight), then one
+ * will need to make changes to the XPC code to accommodate for this.
+ *
+ * The absolute maximum number of channels possible is limited to eight for
+ * performance reasons on sn2 hardware. The internal cross partition structures
+ * require sixteen bytes per channel, and eight allows all of this
+ * interface-shared info to fit in one 128-byte cacheline.
  */
 #define XPC_MEM_CHANNEL		0	/* memory channel number */
 #define	XPC_NET_CHANNEL		1	/* network channel number */
 
-#define	XPC_NCHANNELS		2	/* #of defined channels */
-#define XPC_MAX_NCHANNELS	8	/* max #of channels allowed */
+#define XPC_MAX_NCHANNELS	2	/* max #of channels allowed */
 
-#if XPC_NCHANNELS > XPC_MAX_NCHANNELS
-#error	XPC_NCHANNELS exceeds MAXIMUM allowed.
+#if XPC_MAX_NCHANNELS > 8
+#error	XPC_MAX_NCHANNELS exceeds absolute MAXIMUM possible.
 #endif
 
 /*
- * The format of an XPC message is as follows:
- *
- *      +-------+--------------------------------+
- *      | flags |////////////////////////////////|
- *      +-------+--------------------------------+
- *      |             message #                  |
- *      +----------------------------------------+
- *      |     payload (user-defined message)     |
- *      |                                        |
- *         		:
- *      |                                        |
- *      +----------------------------------------+
- *
- * The size of the payload is defined by the user via xpc_connect(). A user-
- * defined message resides in the payload area.
- *
- * The user should have no dealings with the message header, but only the
- * message's payload. When a message entry is allocated (via xpc_allocate())
- * a pointer to the payload area is returned and not the actual beginning of
- * the XPC message. The user then constructs a message in the payload area
- * and passes that pointer as an argument on xpc_send() or xpc_send_notify().
- *
- * The size of a message entry (within a message queue) must be a cacheline
- * sized multiple in order to facilitate the BTE transfer of messages from one
- * message queue to another. A macro, XPC_MSG_SIZE(), is provided for the user
+ * Define macro, XPC_MSG_SIZE(), is provided for the user
  * that wants to fit as many msg entries as possible in a given memory size
  * (e.g. a memory page).
  */
-struct xpc_msg {
-	u8 flags;		/* FOR XPC INTERNAL USE ONLY */
-	u8 reserved[7];		/* FOR XPC INTERNAL USE ONLY */
-	s64 number;		/* FOR XPC INTERNAL USE ONLY */
-
-	u64 payload;		/* user defined portion of message */
-};
+#define XPC_MSG_MAX_SIZE	128
+#define XPC_MSG_HDR_MAX_SIZE	16
+#define XPC_MSG_PAYLOAD_MAX_SIZE (XPC_MSG_MAX_SIZE - XPC_MSG_HDR_MAX_SIZE)
 
-#define XPC_MSG_PAYLOAD_OFFSET	(u64) (&((struct xpc_msg *)0)->payload)
 #define XPC_MSG_SIZE(_payload_size) \
-		L1_CACHE_ALIGN(XPC_MSG_PAYLOAD_OFFSET + (_payload_size))
+				ALIGN(XPC_MSG_HDR_MAX_SIZE + (_payload_size), \
+				      is_uv() ? 64 : 128)
+
 
 /*
  * Define the return values and values passed to user's callout functions.
@@ -233,8 +179,20 @@ enum xp_retval {
 	xpDisconnected,		/* 51: channel disconnected (closed) */
 
 	xpBteCopyError,		/* 52: bte_copy() returned error */
+	xpSalError,		/* 53: sn SAL error */
+	xpRsvdPageNotSet,	/* 54: the reserved page is not set up */
+	xpPayloadTooBig,	/* 55: payload too large for message slot */
+
+	xpUnsupported,		/* 56: unsupported functionality or resource */
+	xpNeedMoreInfo,		/* 57: more info is needed by SAL */
 
-	xpUnknownReason		/* 53: unknown reason - must be last in enum */
+	xpGruCopyError,		/* 58: gru_copy_gru() returned error */
+	xpGruSendMqError,	/* 59: gru send message queue related error */
+
+	xpBadChannelNumber,	/* 60: invalid channel number */
+	xpBadMsgType,		/* 60: invalid message type */
+
+	xpUnknownReason		/* 61: unknown reason - must be last in enum */
 };
 
 /*
@@ -285,6 +243,9 @@ typedef void (*xpc_channel_func) (enum xp_retval reason, short partid,
  * calling xpc_received().
  *
  * All other reason codes indicate failure.
+ *
+ * NOTE: The user defined function must be callable by an interrupt handler
+ *       and thus cannot block.
  */
 typedef void (*xpc_notify_func) (enum xp_retval reason, short partid,
 				 int ch_number, void *key);
@@ -308,23 +269,22 @@ struct xpc_registration {
 	xpc_channel_func func;	/* function to call */
 	void *key;		/* pointer to user's key */
 	u16 nentries;		/* #of msg entries in local msg queue */
-	u16 msg_size;		/* message queue's message size */
+	u16 entry_size;		/* message queue's message entry size */
 	u32 assigned_limit;	/* limit on #of assigned kthreads */
 	u32 idle_limit;		/* limit on #of idle kthreads */
 } ____cacheline_aligned;
 
 #define XPC_CHANNEL_REGISTERED(_c)	(xpc_registrations[_c].func != NULL)
 
-/* the following are valid xpc_allocate() flags */
+/* the following are valid xpc_send() or xpc_send_notify() flags */
 #define XPC_WAIT	0	/* wait flag */
 #define XPC_NOWAIT	1	/* no wait flag */
 
 struct xpc_interface {
 	void (*connect) (int);
 	void (*disconnect) (int);
-	enum xp_retval (*allocate) (short, int, u32, void **);
-	enum xp_retval (*send) (short, int, void *);
-	enum xp_retval (*send_notify) (short, int, void *,
+	enum xp_retval (*send) (short, int, u32, void *, u16);
+	enum xp_retval (*send_notify) (short, int, u32, void *, u16,
 					xpc_notify_func, void *);
 	void (*received) (short, int, void *);
 	enum xp_retval (*partid_to_nasids) (short, void *);
@@ -334,10 +294,9 @@ extern struct xpc_interface xpc_interface;
 
 extern void xpc_set_interface(void (*)(int),
 			      void (*)(int),
-			      enum xp_retval (*)(short, int, u32, void **),
-			      enum xp_retval (*)(short, int, void *),
-			      enum xp_retval (*)(short, int, void *,
-						  xpc_notify_func, void *),
+			      enum xp_retval (*)(short, int, u32, void *, u16),
+			      enum xp_retval (*)(short, int, u32, void *, u16,
+						 xpc_notify_func, void *),
 			      void (*)(short, int, void *),
 			      enum xp_retval (*)(short, void *));
 extern void xpc_clear_interface(void);
@@ -347,22 +306,19 @@ extern enum xp_retval xpc_connect(int, xpc_channel_func, void *, u16,
 extern void xpc_disconnect(int);
 
 static inline enum xp_retval
-xpc_allocate(short partid, int ch_number, u32 flags, void **payload)
-{
-	return xpc_interface.allocate(partid, ch_number, flags, payload);
-}
-
-static inline enum xp_retval
-xpc_send(short partid, int ch_number, void *payload)
+xpc_send(short partid, int ch_number, u32 flags, void *payload,
+	 u16 payload_size)
 {
-	return xpc_interface.send(partid, ch_number, payload);
+	return xpc_interface.send(partid, ch_number, flags, payload,
+				  payload_size);
 }
 
 static inline enum xp_retval
-xpc_send_notify(short partid, int ch_number, void *payload,
-		xpc_notify_func func, void *key)
+xpc_send_notify(short partid, int ch_number, u32 flags, void *payload,
+		u16 payload_size, xpc_notify_func func, void *key)
 {
-	return xpc_interface.send_notify(partid, ch_number, payload, func, key);
+	return xpc_interface.send_notify(partid, ch_number, flags, payload,
+					 payload_size, func, key);
 }
 
 static inline void
@@ -377,8 +333,23 @@ xpc_partid_to_nasids(short partid, void *nasids)
 	return xpc_interface.partid_to_nasids(partid, nasids);
 }
 
+extern short xp_max_npartitions;
+extern short xp_partition_id;
+extern u8 xp_region_size;
+
+extern unsigned long (*xp_pa) (void *);
+extern enum xp_retval (*xp_remote_memcpy) (unsigned long, const unsigned long,
+		       size_t);
+extern int (*xp_cpu_to_nasid) (int);
+
 extern u64 xp_nofault_PIOR_target;
 extern int xp_nofault_PIOR(void *);
 extern int xp_error_PIOR(void);
 
+extern struct device *xp;
+extern enum xp_retval xp_init_sn2(void);
+extern enum xp_retval xp_init_uv(void);
+extern void xp_exit_sn2(void);
+extern void xp_exit_uv(void);
+
 #endif /* _DRIVERS_MISC_SGIXP_XP_H */
diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c
index 196480b..66a1d19 100644
--- a/drivers/misc/sgi-xp/xp_main.c
+++ b/drivers/misc/sgi-xp/xp_main.c
@@ -14,29 +14,48 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
 #include <linux/module.h>
-#include <linux/mutex.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn_sal.h>
+#include <linux/device.h>
 #include "xp.h"
 
-/*
- * The export of xp_nofault_PIOR needs to happen here since it is defined
- * in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is
- * defined here.
- */
-EXPORT_SYMBOL_GPL(xp_nofault_PIOR);
+/* define the XP debug device structures to be used with dev_dbg() et al */
+
+struct device_driver xp_dbg_name = {
+	.name = "xp"
+};
+
+struct device xp_dbg_subname = {
+	.bus_id = {0},		/* set to "" */
+	.driver = &xp_dbg_name
+};
+
+struct device *xp = &xp_dbg_subname;
+
+/* max #of partitions possible */
+short xp_max_npartitions;
+EXPORT_SYMBOL_GPL(xp_max_npartitions);
+
+short xp_partition_id;
+EXPORT_SYMBOL_GPL(xp_partition_id);
+
+u8 xp_region_size;
+EXPORT_SYMBOL_GPL(xp_region_size);
+
+unsigned long (*xp_pa) (void *addr);
+EXPORT_SYMBOL_GPL(xp_pa);
+
+enum xp_retval (*xp_remote_memcpy) (unsigned long dst_gpa,
+				    const unsigned long src_gpa, size_t len);
+EXPORT_SYMBOL_GPL(xp_remote_memcpy);
 
-u64 xp_nofault_PIOR_target;
-EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target);
+int (*xp_cpu_to_nasid) (int cpuid);
+EXPORT_SYMBOL_GPL(xp_cpu_to_nasid);
 
 /*
  * xpc_registrations[] keeps track of xpc_connect()'s done by the kernel-level
  * users of XPC.
  */
-struct xpc_registration xpc_registrations[XPC_NCHANNELS];
+struct xpc_registration xpc_registrations[XPC_MAX_NCHANNELS];
 EXPORT_SYMBOL_GPL(xpc_registrations);
 
 /*
@@ -51,10 +70,9 @@ xpc_notloaded(void)
 struct xpc_interface xpc_interface = {
 	(void (*)(int))xpc_notloaded,
 	(void (*)(int))xpc_notloaded,
-	(enum xp_retval(*)(short, int, u32, void **))xpc_notloaded,
-	(enum xp_retval(*)(short, int, void *))xpc_notloaded,
-	(enum xp_retval(*)(short, int, void *, xpc_notify_func, void *))
-	    xpc_notloaded,
+	(enum xp_retval(*)(short, int, u32, void *, u16))xpc_notloaded,
+	(enum xp_retval(*)(short, int, u32, void *, u16, xpc_notify_func,
+			   void *))xpc_notloaded,
 	(void (*)(short, int, void *))xpc_notloaded,
 	(enum xp_retval(*)(short, void *))xpc_notloaded
 };
@@ -66,16 +84,14 @@ EXPORT_SYMBOL_GPL(xpc_interface);
 void
 xpc_set_interface(void (*connect) (int),
 		  void (*disconnect) (int),
-		  enum xp_retval (*allocate) (short, int, u32, void **),
-		  enum xp_retval (*send) (short, int, void *),
-		  enum xp_retval (*send_notify) (short, int, void *,
+		  enum xp_retval (*send) (short, int, u32, void *, u16),
+		  enum xp_retval (*send_notify) (short, int, u32, void *, u16,
 						  xpc_notify_func, void *),
 		  void (*received) (short, int, void *),
 		  enum xp_retval (*partid_to_nasids) (short, void *))
 {
 	xpc_interface.connect = connect;
 	xpc_interface.disconnect = disconnect;
-	xpc_interface.allocate = allocate;
 	xpc_interface.send = send;
 	xpc_interface.send_notify = send_notify;
 	xpc_interface.received = received;
@@ -91,13 +107,11 @@ xpc_clear_interface(void)
 {
 	xpc_interface.connect = (void (*)(int))xpc_notloaded;
 	xpc_interface.disconnect = (void (*)(int))xpc_notloaded;
-	xpc_interface.allocate = (enum xp_retval(*)(short, int, u32,
-						     void **))xpc_notloaded;
-	xpc_interface.send = (enum xp_retval(*)(short, int, void *))
+	xpc_interface.send = (enum xp_retval(*)(short, int, u32, void *, u16))
 	    xpc_notloaded;
-	xpc_interface.send_notify = (enum xp_retval(*)(short, int, void *,
-							xpc_notify_func,
-							void *))xpc_notloaded;
+	xpc_interface.send_notify = (enum xp_retval(*)(short, int, u32, void *,
+						       u16, xpc_notify_func,
+						       void *))xpc_notloaded;
 	xpc_interface.received = (void (*)(short, int, void *))
 	    xpc_notloaded;
 	xpc_interface.partid_to_nasids = (enum xp_retval(*)(short, void *))
@@ -135,11 +149,14 @@ xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size,
 {
 	struct xpc_registration *registration;
 
-	DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+	DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
 	DBUG_ON(payload_size == 0 || nentries == 0);
 	DBUG_ON(func == NULL);
 	DBUG_ON(assigned_limit == 0 || idle_limit > assigned_limit);
 
+	if (XPC_MSG_SIZE(payload_size) > XPC_MSG_MAX_SIZE)
+		return xpPayloadTooBig;
+
 	registration = &xpc_registrations[ch_number];
 
 	if (mutex_lock_interruptible(&registration->mutex) != 0)
@@ -152,7 +169,7 @@ xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size,
 	}
 
 	/* register the channel for connection */
-	registration->msg_size = XPC_MSG_SIZE(payload_size);
+	registration->entry_size = XPC_MSG_SIZE(payload_size);
 	registration->nentries = nentries;
 	registration->assigned_limit = assigned_limit;
 	registration->idle_limit = idle_limit;
@@ -185,7 +202,7 @@ xpc_disconnect(int ch_number)
 {
 	struct xpc_registration *registration;
 
-	DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+	DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
 
 	registration = &xpc_registrations[ch_number];
 
@@ -206,7 +223,7 @@ xpc_disconnect(int ch_number)
 	registration->func = NULL;
 	registration->key = NULL;
 	registration->nentries = 0;
-	registration->msg_size = 0;
+	registration->entry_size = 0;
 	registration->assigned_limit = 0;
 	registration->idle_limit = 0;
 
@@ -221,39 +238,21 @@ EXPORT_SYMBOL_GPL(xpc_disconnect);
 int __init
 xp_init(void)
 {
-	int ret, ch_number;
-	u64 func_addr = *(u64 *)xp_nofault_PIOR;
-	u64 err_func_addr = *(u64 *)xp_error_PIOR;
-
-	if (!ia64_platform_is("sn2"))
-		return -ENODEV;
+	enum xp_retval ret;
+	int ch_number;
 
-	/*
-	 * Register a nofault code region which performs a cross-partition
-	 * PIO read. If the PIO read times out, the MCA handler will consume
-	 * the error and return to a kernel-provided instruction to indicate
-	 * an error. This PIO read exists because it is guaranteed to timeout
-	 * if the destination is down (AMO operations do not timeout on at
-	 * least some CPUs on Shubs <= v1.2, which unfortunately we have to
-	 * work around).
-	 */
-	ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr,
-				       1, 1);
-	if (ret != 0) {
-		printk(KERN_ERR "XP: can't register nofault code, error=%d\n",
-		       ret);
-	}
-	/*
-	 * Setup the nofault PIO read target. (There is no special reason why
-	 * SH_IPI_ACCESS was selected.)
-	 */
-	if (is_shub2())
-		xp_nofault_PIOR_target = SH2_IPI_ACCESS0;
+	if (is_shub())
+		ret = xp_init_sn2();
+	else if (is_uv())
+		ret = xp_init_uv();
 	else
-		xp_nofault_PIOR_target = SH1_IPI_ACCESS;
+		ret = xpUnsupported;
+
+	if (ret != xpSuccess)
+		return -ENODEV;
 
 	/* initialize the connection registration mutex */
-	for (ch_number = 0; ch_number < XPC_NCHANNELS; ch_number++)
+	for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
 		mutex_init(&xpc_registrations[ch_number].mutex);
 
 	return 0;
@@ -264,12 +263,10 @@ module_init(xp_init);
 void __exit
 xp_exit(void)
 {
-	u64 func_addr = *(u64 *)xp_nofault_PIOR;
-	u64 err_func_addr = *(u64 *)xp_error_PIOR;
-
-	/* unregister the PIO read nofault code region */
-	(void)sn_register_nofault_code(func_addr, err_func_addr,
-				       err_func_addr, 1, 0);
+	if (is_shub())
+		xp_exit_sn2();
+	else if (is_uv())
+		xp_exit_uv();
 }
 
 module_exit(xp_exit);
diff --git a/drivers/misc/sgi-xp/xp_sn2.c b/drivers/misc/sgi-xp/xp_sn2.c
new file mode 100644
index 0000000..1440134
--- /dev/null
+++ b/drivers/misc/sgi-xp/xp_sn2.c
@@ -0,0 +1,146 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+/*
+ * Cross Partition (XP) sn2-based functions.
+ *
+ *      Architecture specific implementation of common functions.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <asm/sn/bte.h>
+#include <asm/sn/sn_sal.h>
+#include "xp.h"
+
+/*
+ * The export of xp_nofault_PIOR needs to happen here since it is defined
+ * in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is
+ * defined here.
+ */
+EXPORT_SYMBOL_GPL(xp_nofault_PIOR);
+
+u64 xp_nofault_PIOR_target;
+EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target);
+
+/*
+ * Register a nofault code region which performs a cross-partition PIO read.
+ * If the PIO read times out, the MCA handler will consume the error and
+ * return to a kernel-provided instruction to indicate an error. This PIO read
+ * exists because it is guaranteed to timeout if the destination is down
+ * (amo operations do not timeout on at least some CPUs on Shubs <= v1.2,
+ * which unfortunately we have to work around).
+ */
+static enum xp_retval
+xp_register_nofault_code_sn2(void)
+{
+	int ret;
+	u64 func_addr;
+	u64 err_func_addr;
+
+	func_addr = *(u64 *)xp_nofault_PIOR;
+	err_func_addr = *(u64 *)xp_error_PIOR;
+	ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr,
+				       1, 1);
+	if (ret != 0) {
+		dev_err(xp, "can't register nofault code, error=%d\n", ret);
+		return xpSalError;
+	}
+	/*
+	 * Setup the nofault PIO read target. (There is no special reason why
+	 * SH_IPI_ACCESS was selected.)
+	 */
+	if (is_shub1())
+		xp_nofault_PIOR_target = SH1_IPI_ACCESS;
+	else if (is_shub2())
+		xp_nofault_PIOR_target = SH2_IPI_ACCESS0;
+
+	return xpSuccess;
+}
+
+static void
+xp_unregister_nofault_code_sn2(void)
+{
+	u64 func_addr = *(u64 *)xp_nofault_PIOR;
+	u64 err_func_addr = *(u64 *)xp_error_PIOR;
+
+	/* unregister the PIO read nofault code region */
+	(void)sn_register_nofault_code(func_addr, err_func_addr,
+				       err_func_addr, 1, 0);
+}
+
+/*
+ * Convert a virtual memory address to a physical memory address.
+ */
+static unsigned long
+xp_pa_sn2(void *addr)
+{
+	return __pa(addr);
+}
+
+/*
+ * Wrapper for bte_copy().
+ *
+ *	dst_pa - physical address of the destination of the transfer.
+ *	src_pa - physical address of the source of the transfer.
+ *	len - number of bytes to transfer from source to destination.
+ *
+ * Note: xp_remote_memcpy_sn2() should never be called while holding a spinlock.
+ */
+static enum xp_retval
+xp_remote_memcpy_sn2(unsigned long dst_pa, const unsigned long src_pa,
+		     size_t len)
+{
+	bte_result_t ret;
+
+	ret = bte_copy(src_pa, dst_pa, len, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
+	if (ret == BTE_SUCCESS)
+		return xpSuccess;
+
+	if (is_shub2()) {
+		dev_err(xp, "bte_copy() on shub2 failed, error=0x%x dst_pa="
+			"0x%016lx src_pa=0x%016lx len=%ld\\n", ret, dst_pa,
+			src_pa, len);
+	} else {
+		dev_err(xp, "bte_copy() failed, error=%d dst_pa=0x%016lx "
+			"src_pa=0x%016lx len=%ld\\n", ret, dst_pa, src_pa, len);
+	}
+
+	return xpBteCopyError;
+}
+
+static int
+xp_cpu_to_nasid_sn2(int cpuid)
+{
+	return cpuid_to_nasid(cpuid);
+}
+
+enum xp_retval
+xp_init_sn2(void)
+{
+	BUG_ON(!is_shub());
+
+	xp_max_npartitions = XP_MAX_NPARTITIONS_SN2;
+	xp_partition_id = sn_partition_id;
+	xp_region_size = sn_region_size;
+
+	xp_pa = xp_pa_sn2;
+	xp_remote_memcpy = xp_remote_memcpy_sn2;
+	xp_cpu_to_nasid = xp_cpu_to_nasid_sn2;
+
+	return xp_register_nofault_code_sn2();
+}
+
+void
+xp_exit_sn2(void)
+{
+	BUG_ON(!is_shub());
+
+	xp_unregister_nofault_code_sn2();
+}
+
diff --git a/drivers/misc/sgi-xp/xp_uv.c b/drivers/misc/sgi-xp/xp_uv.c
new file mode 100644
index 0000000..d9f7ce2
--- /dev/null
+++ b/drivers/misc/sgi-xp/xp_uv.c
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+/*
+ * Cross Partition (XP) uv-based functions.
+ *
+ *      Architecture specific implementation of common functions.
+ *
+ */
+
+#include <linux/device.h>
+#include <asm/uv/uv_hub.h>
+#include "../sgi-gru/grukservices.h"
+#include "xp.h"
+
+/*
+ * Convert a virtual memory address to a physical memory address.
+ */
+static unsigned long
+xp_pa_uv(void *addr)
+{
+	return uv_gpa(addr);
+}
+
+static enum xp_retval
+xp_remote_memcpy_uv(unsigned long dst_gpa, const unsigned long src_gpa,
+		    size_t len)
+{
+	int ret;
+
+	ret = gru_copy_gpa(dst_gpa, src_gpa, len);
+	if (ret == 0)
+		return xpSuccess;
+
+	dev_err(xp, "gru_copy_gpa() failed, dst_gpa=0x%016lx src_gpa=0x%016lx "
+		"len=%ld\n", dst_gpa, src_gpa, len);
+	return xpGruCopyError;
+}
+
+static int
+xp_cpu_to_nasid_uv(int cpuid)
+{
+	/* ??? Is this same as sn2 nasid in mach/part bitmaps set up by SAL? */
+	return UV_PNODE_TO_NASID(uv_cpu_to_pnode(cpuid));
+}
+
+enum xp_retval
+xp_init_uv(void)
+{
+	BUG_ON(!is_uv());
+
+	xp_max_npartitions = XP_MAX_NPARTITIONS_UV;
+	xp_partition_id = 0;	/* !!! not correct value */
+	xp_region_size = 0;	/* !!! not correct value */
+
+	xp_pa = xp_pa_uv;
+	xp_remote_memcpy = xp_remote_memcpy_uv;
+	xp_cpu_to_nasid = xp_cpu_to_nasid_uv;
+
+	return xpSuccess;
+}
+
+void
+xp_exit_uv(void)
+{
+	BUG_ON(!is_uv());
+}
diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h
index 11ac267..619208d 100644
--- a/drivers/misc/sgi-xp/xpc.h
+++ b/drivers/misc/sgi-xp/xpc.h
@@ -13,18 +13,10 @@
 #ifndef _DRIVERS_MISC_SGIXP_XPC_H
 #define _DRIVERS_MISC_SGIXP_XPC_H
 
-#include <linux/interrupt.h>
-#include <linux/sysctl.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
+#include <linux/wait.h>
 #include <linux/completion.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/clksupport.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/mspec.h>
-#include <asm/sn/shub_mmr.h>
+#include <linux/timer.h>
+#include <linux/sched.h>
 #include "xp.h"
 
 /*
@@ -36,23 +28,7 @@
 #define XPC_VERSION_MAJOR(_v)		((_v) >> 4)
 #define XPC_VERSION_MINOR(_v)		((_v) & 0xf)
 
-/*
- * The next macros define word or bit representations for given
- * C-brick nasid in either the SAL provided bit array representing
- * nasids in the partition/machine or the AMO_t array used for
- * inter-partition initiation communications.
- *
- * For SN2 machines, C-Bricks are alway even numbered NASIDs.  As
- * such, some space will be saved by insisting that nasid information
- * passed from SAL always be packed for C-Bricks and the
- * cross-partition interrupts use the same packing scheme.
- */
-#define XPC_NASID_W_INDEX(_n)	(((_n) / 64) / 2)
-#define XPC_NASID_B_INDEX(_n)	(((_n) / 2) & (64 - 1))
-#define XPC_NASID_IN_ARRAY(_n, _p) ((_p)[XPC_NASID_W_INDEX(_n)] & \
-				    (1UL << XPC_NASID_B_INDEX(_n)))
-#define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2)
-
+/* define frequency of the heartbeat and frequency how often it's checked */
 #define XPC_HB_DEFAULT_INTERVAL		5	/* incr HB every x secs */
 #define XPC_HB_CHECK_DEFAULT_INTERVAL	20	/* check HB every x secs */
 
@@ -72,11 +48,11 @@
  *
  *   reserved page header
  *
- *     The first cacheline of the reserved page contains the header
- *     (struct xpc_rsvd_page). Before SAL initialization has completed,
+ *     The first two 64-byte cachelines of the reserved page contain the
+ *     header (struct xpc_rsvd_page). Before SAL initialization has completed,
  *     SAL has set up the following fields of the reserved page header:
- *     SAL_signature, SAL_version, partid, and nasids_size. The other
- *     fields are set up by XPC. (xpc_rsvd_page points to the local
+ *     SAL_signature, SAL_version, SAL_partid, and SAL_nasids_size. The
+ *     other fields are set up by XPC. (xpc_rsvd_page points to the local
  *     partition's reserved page.)
  *
  *   part_nasids mask
@@ -87,14 +63,16 @@
  *     the actual nasids in the entire machine (mach_nasids). We're only
  *     interested in the even numbered nasids (which contain the processors
  *     and/or memory), so we only need half as many bits to represent the
- *     nasids. The part_nasids mask is located starting at the first cacheline
- *     following the reserved page header. The mach_nasids mask follows right
- *     after the part_nasids mask. The size in bytes of each mask is reflected
- *     by the reserved page header field 'nasids_size'. (Local partition's
- *     mask pointers are xpc_part_nasids and xpc_mach_nasids.)
+ *     nasids. When mapping nasid to bit in a mask (or bit to nasid) be sure
+ *     to either divide or multiply by 2. The part_nasids mask is located
+ *     starting at the first cacheline following the reserved page header. The
+ *     mach_nasids mask follows right after the part_nasids mask. The size in
+ *     bytes of each mask is reflected by the reserved page header field
+ *     'SAL_nasids_size'. (Local partition's mask pointers are xpc_part_nasids
+ *     and xpc_mach_nasids.)
  *
- *   vars
- *   vars part
+ *   vars	(ia64-sn2 only)
+ *   vars part	(ia64-sn2 only)
  *
  *     Immediately following the mach_nasids mask are the XPC variables
  *     required by other partitions. First are those that are generic to all
@@ -102,43 +80,26 @@
  *     which are partition specific (vars part). These are setup by XPC.
  *     (Local partition's vars pointers are xpc_vars and xpc_vars_part.)
  *
- * Note: Until vars_pa is set, the partition XPC code has not been initialized.
+ * Note: Until 'ts_jiffies' is set non-zero, the partition XPC code has not been
+ *       initialized.
  */
 struct xpc_rsvd_page {
 	u64 SAL_signature;	/* SAL: unique signature */
 	u64 SAL_version;	/* SAL: version */
-	u8 partid;		/* SAL: partition ID */
+	short SAL_partid;	/* SAL: partition ID */
+	short max_npartitions;	/* value of XPC_MAX_PARTITIONS */
 	u8 version;
-	u8 pad1[6];		/* align to next u64 in cacheline */
-	u64 vars_pa;		/* physical address of struct xpc_vars */
-	struct timespec stamp;	/* time when reserved page was setup by XPC */
-	u64 pad2[9];		/* align to last u64 in cacheline */
-	u64 nasids_size;	/* SAL: size of each nasid mask in bytes */
+	u8 pad1[3];		/* align to next u64 in 1st 64-byte cacheline */
+	union {
+		unsigned long vars_pa;	/* phys address of struct xpc_vars */
+		unsigned long activate_mq_gpa; /* gru phy addr of activate_mq */
+	} sn;
+	unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */
+	u64 pad2[10];		/* align to last u64 in 2nd 64-byte cacheline */
+	u64 SAL_nasids_size;	/* SAL: size of each nasid mask in bytes */
 };
 
-#define XPC_RP_VERSION _XPC_VERSION(1, 1) /* version 1.1 of the reserved page */
-
-#define XPC_SUPPORTS_RP_STAMP(_version) \
-			(_version >= _XPC_VERSION(1, 1))
-
-/*
- * compare stamps - the return value is:
- *
- *	< 0,	if stamp1 < stamp2
- *	= 0,	if stamp1 == stamp2
- *	> 0,	if stamp1 > stamp2
- */
-static inline int
-xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2)
-{
-	int ret;
-
-	ret = stamp1->tv_sec - stamp2->tv_sec;
-	if (ret == 0)
-		ret = stamp1->tv_nsec - stamp2->tv_nsec;
-
-	return ret;
-}
+#define XPC_RP_VERSION _XPC_VERSION(2, 0) /* version 2.0 of the reserved page */
 
 /*
  * Define the structures by which XPC variables can be exported to other
@@ -154,85 +115,40 @@ xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2)
  * reflected by incrementing either the major or minor version numbers
  * of struct xpc_vars.
  */
-struct xpc_vars {
+struct xpc_vars_sn2 {
 	u8 version;
 	u64 heartbeat;
-	u64 heartbeating_to_mask;
+	DECLARE_BITMAP(heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2);
 	u64 heartbeat_offline;	/* if 0, heartbeat should be changing */
-	int act_nasid;
-	int act_phys_cpuid;
-	u64 vars_part_pa;
-	u64 amos_page_pa;	/* paddr of page of AMOs from MSPEC driver */
-	AMO_t *amos_page;	/* vaddr of page of AMOs from MSPEC driver */
+	int activate_IRQ_nasid;
+	int activate_IRQ_phys_cpuid;
+	unsigned long vars_part_pa;
+	unsigned long amos_page_pa;/* paddr of page of amos from MSPEC driver */
+	struct amo *amos_page;	/* vaddr of page of amos from MSPEC driver */
 };
 
 #define XPC_V_VERSION _XPC_VERSION(3, 1)    /* version 3.1 of the cross vars */
 
-#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \
-			(_version >= _XPC_VERSION(3, 1))
-
-static inline int
-xpc_hb_allowed(short partid, struct xpc_vars *vars)
-{
-	return ((vars->heartbeating_to_mask & (1UL << partid)) != 0);
-}
-
-static inline void
-xpc_allow_hb(short partid, struct xpc_vars *vars)
-{
-	u64 old_mask, new_mask;
-
-	do {
-		old_mask = vars->heartbeating_to_mask;
-		new_mask = (old_mask | (1UL << partid));
-	} while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
-		 old_mask);
-}
-
-static inline void
-xpc_disallow_hb(short partid, struct xpc_vars *vars)
-{
-	u64 old_mask, new_mask;
-
-	do {
-		old_mask = vars->heartbeating_to_mask;
-		new_mask = (old_mask & ~(1UL << partid));
-	} while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
-		 old_mask);
-}
-
-/*
- * The AMOs page consists of a number of AMO variables which are divided into
- * four groups, The first two groups are used to identify an IRQ's sender.
- * These two groups consist of 64 and 128 AMO variables respectively. The last
- * two groups, consisting of just one AMO variable each, are used to identify
- * the remote partitions that are currently engaged (from the viewpoint of
- * the XPC running on the remote partition).
- */
-#define XPC_NOTIFY_IRQ_AMOS	   0
-#define XPC_ACTIVATE_IRQ_AMOS	   (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS)
-#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS)
-#define XPC_DISENGAGE_REQUEST_AMO  (XPC_ENGAGED_PARTITIONS_AMO + 1)
-
 /*
  * The following structure describes the per partition specific variables.
  *
  * An array of these structures, one per partition, will be defined. As a
  * partition becomes active XPC will copy the array entry corresponding to
- * itself from that partition. It is desirable that the size of this
- * structure evenly divide into a cacheline, such that none of the entries
- * in this array crosses a cacheline boundary. As it is now, each entry
- * occupies half a cacheline.
+ * itself from that partition. It is desirable that the size of this structure
+ * evenly divides into a 128-byte cacheline, such that none of the entries in
+ * this array crosses a 128-byte cacheline boundary. As it is now, each entry
+ * occupies 64-bytes.
  */
-struct xpc_vars_part {
+struct xpc_vars_part_sn2 {
 	u64 magic;
 
-	u64 openclose_args_pa;	/* physical address of open and close args */
-	u64 GPs_pa;		/* physical address of Get/Put values */
+	unsigned long openclose_args_pa; /* phys addr of open and close args */
+	unsigned long GPs_pa;	/* physical address of Get/Put values */
+
+	unsigned long chctl_amo_pa; /* physical address of chctl flags' amo */
 
-	u64 IPI_amo_pa;		/* physical address of IPI AMO_t structure */
-	int IPI_nasid;		/* nasid of where to send IPIs */
-	int IPI_phys_cpuid;	/* physical CPU ID of where to send IPIs */
+	int notify_IRQ_nasid;	/* nasid of where to send notify IRQs */
+	int notify_IRQ_phys_cpuid;	/* CPUID of where to send notify IRQs */
 
 	u8 nchannels;		/* #of defined channels supported */
 
@@ -248,20 +164,95 @@ struct xpc_vars_part {
  * MAGIC2 indicates that this partition has pulled the remote partititions
  * per partition variables that pertain to this partition.
  */
-#define XPC_VP_MAGIC1	0x0053524156435058L   /* 'XPCVARS\0'L (little endian) */
-#define XPC_VP_MAGIC2	0x0073726176435058L   /* 'XPCvars\0'L (little endian) */
+#define XPC_VP_MAGIC1_SN2 0x0053524156435058L /* 'XPCVARS\0'L (little endian) */
+#define XPC_VP_MAGIC2_SN2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */
 
 /* the reserved page sizes and offsets */
 
 #define XPC_RP_HEADER_SIZE	L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page))
-#define XPC_RP_VARS_SIZE	L1_CACHE_ALIGN(sizeof(struct xpc_vars))
+#define XPC_RP_VARS_SIZE	L1_CACHE_ALIGN(sizeof(struct xpc_vars_sn2))
 
-#define XPC_RP_PART_NASIDS(_rp) ((u64 *)((u8 *)(_rp) + XPC_RP_HEADER_SIZE))
-#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words)
-#define XPC_RP_VARS(_rp)	((struct xpc_vars *)(XPC_RP_MACH_NASIDS(_rp) + \
-				    xp_nasid_mask_words))
-#define XPC_RP_VARS_PART(_rp)	((struct xpc_vars_part *) \
-				    ((u8 *)XPC_RP_VARS(_rp) + XPC_RP_VARS_SIZE))
+#define XPC_RP_PART_NASIDS(_rp) ((unsigned long *)((u8 *)(_rp) + \
+				 XPC_RP_HEADER_SIZE))
+#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + \
+				 xpc_nasid_mask_nlongs)
+#define XPC_RP_VARS(_rp)	((struct xpc_vars_sn2 *) \
+				 (XPC_RP_MACH_NASIDS(_rp) + \
+				  xpc_nasid_mask_nlongs))
+
+/*
+ * The activate_mq is used to send/receive GRU messages that affect XPC's
+ * heartbeat, partition active state, and channel state. This is UV only.
+ */
+struct xpc_activate_mq_msghdr_uv {
+	short partid;		/* sender's partid */
+	u8 act_state;		/* sender's act_state at time msg sent */
+	u8 type;		/* message's type */
+	unsigned long rp_ts_jiffies; /* timestamp of sender's rp setup by XPC */
+};
+
+/* activate_mq defined message types */
+#define XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV		0
+#define XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV		1
+#define XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV	2
+#define XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV		3
+
+#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV		4
+#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV		5
+
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV	6
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV		7
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV	8
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV		9
+
+#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV		10
+#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV		11
+
+struct xpc_activate_mq_msg_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+};
+
+struct xpc_activate_mq_msg_heartbeat_req_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	u64 heartbeat;
+};
+
+struct xpc_activate_mq_msg_activate_req_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	unsigned long rp_gpa;
+	unsigned long activate_mq_gpa;
+};
+
+struct xpc_activate_mq_msg_deactivate_req_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	enum xp_retval reason;
+};
+
+struct xpc_activate_mq_msg_chctl_closerequest_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	short ch_number;
+	enum xp_retval reason;
+};
+
+struct xpc_activate_mq_msg_chctl_closereply_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	short ch_number;
+};
+
+struct xpc_activate_mq_msg_chctl_openrequest_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	short ch_number;
+	short entry_size;	/* size of notify_mq's GRU messages */
+	short local_nentries;	/* ??? Is this needed? What is? */
+};
+
+struct xpc_activate_mq_msg_chctl_openreply_uv {
+	struct xpc_activate_mq_msghdr_uv hdr;
+	short ch_number;
+	short remote_nentries;	/* ??? Is this needed? What is? */
+	short local_nentries;	/* ??? Is this needed? What is? */
+	unsigned long local_notify_mq_gpa;
+};
 
 /*
  * Functions registered by add_timer() or called by kernel_thread() only
@@ -270,22 +261,22 @@ struct xpc_vars_part {
  * the passed argument.
  */
 #define XPC_PACK_ARGS(_arg1, _arg2) \
-			((((u64) _arg1) & 0xffffffff) | \
-			((((u64) _arg2) & 0xffffffff) << 32))
+			((((u64)_arg1) & 0xffffffff) | \
+			((((u64)_arg2) & 0xffffffff) << 32))
 
-#define XPC_UNPACK_ARG1(_args)	(((u64) _args) & 0xffffffff)
-#define XPC_UNPACK_ARG2(_args)	((((u64) _args) >> 32) & 0xffffffff)
+#define XPC_UNPACK_ARG1(_args)	(((u64)_args) & 0xffffffff)
+#define XPC_UNPACK_ARG2(_args)	((((u64)_args) >> 32) & 0xffffffff)
 
 /*
  * Define a Get/Put value pair (pointers) used with a message queue.
  */
-struct xpc_gp {
+struct xpc_gp_sn2 {
 	s64 get;		/* Get value */
 	s64 put;		/* Put value */
 };
 
 #define XPC_GP_SIZE \
-		L1_CACHE_ALIGN(sizeof(struct xpc_gp) * XPC_NCHANNELS)
+		L1_CACHE_ALIGN(sizeof(struct xpc_gp_sn2) * XPC_MAX_NCHANNELS)
 
 /*
  * Define a structure that contains arguments associated with opening and
@@ -293,31 +284,89 @@ struct xpc_gp {
  */
 struct xpc_openclose_args {
 	u16 reason;		/* reason why channel is closing */
-	u16 msg_size;		/* sizeof each message entry */
+	u16 entry_size;		/* sizeof each message entry */
 	u16 remote_nentries;	/* #of message entries in remote msg queue */
 	u16 local_nentries;	/* #of message entries in local msg queue */
-	u64 local_msgqueue_pa;	/* physical address of local message queue */
+	unsigned long local_msgqueue_pa; /* phys addr of local message queue */
 };
 
 #define XPC_OPENCLOSE_ARGS_SIZE \
-	      L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * XPC_NCHANNELS)
+	      L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * \
+	      XPC_MAX_NCHANNELS)
 
-/* struct xpc_msg flags */
 
-#define	XPC_M_DONE		0x01	/* msg has been received/consumed */
-#define	XPC_M_READY		0x02	/* msg is ready to be sent */
-#define	XPC_M_INTERRUPT		0x04	/* send interrupt when msg consumed */
+/*
+ * Structures to define a fifo singly-linked list.
+ */
 
-#define XPC_MSG_ADDRESS(_payload) \
-		((struct xpc_msg *)((u8 *)(_payload) - XPC_MSG_PAYLOAD_OFFSET))
+struct xpc_fifo_entry_uv {
+	struct xpc_fifo_entry_uv *next;
+};
+
+struct xpc_fifo_head_uv {
+	struct xpc_fifo_entry_uv *first;
+	struct xpc_fifo_entry_uv *last;
+	spinlock_t lock;
+	int n_entries;
+};
 
 /*
- * Defines notify entry.
+ * Define a sn2 styled message.
+ *
+ * A user-defined message resides in the payload area. The max size of the
+ * payload is defined by the user via xpc_connect().
+ *
+ * The size of a message entry (within a message queue) must be a 128-byte
+ * cacheline sized multiple in order to facilitate the BTE transfer of messages
+ * from one message queue to another.
+ */
+struct xpc_msg_sn2 {
+	u8 flags;		/* FOR XPC INTERNAL USE ONLY */
+	u8 reserved[7];		/* FOR XPC INTERNAL USE ONLY */
+	s64 number;		/* FOR XPC INTERNAL USE ONLY */
+
+	u64 payload;		/* user defined portion of message */
+};
+
+/* struct xpc_msg_sn2 flags */
+
+#define	XPC_M_SN2_DONE		0x01	/* msg has been received/consumed */
+#define	XPC_M_SN2_READY		0x02	/* msg is ready to be sent */
+#define	XPC_M_SN2_INTERRUPT	0x04	/* send interrupt when msg consumed */
+
+/*
+ * The format of a uv XPC notify_mq GRU message is as follows:
+ *
+ * A user-defined message resides in the payload area. The max size of the
+ * payload is defined by the user via xpc_connect().
+ *
+ * The size of a message (payload and header) sent via the GRU must be either 1
+ * or 2 GRU_CACHE_LINE_BYTES in length.
+ */
+
+struct xpc_notify_mq_msghdr_uv {
+	union {
+		unsigned int gru_msg_hdr;	/* FOR GRU INTERNAL USE ONLY */
+		struct xpc_fifo_entry_uv next;	/* FOR XPC INTERNAL USE ONLY */
+	} u;
+	short partid;		/* FOR XPC INTERNAL USE ONLY */
+	u8 ch_number;		/* FOR XPC INTERNAL USE ONLY */
+	u8 size;		/* FOR XPC INTERNAL USE ONLY */
+	unsigned int msg_slot_number;	/* FOR XPC INTERNAL USE ONLY */
+};
+
+struct xpc_notify_mq_msg_uv {
+	struct xpc_notify_mq_msghdr_uv hdr;
+	unsigned long payload;
+};
+
+/*
+ * Define sn2's notify entry.
  *
  * This is used to notify a message's sender that their message was received
  * and consumed by the intended recipient.
  */
-struct xpc_notify {
+struct xpc_notify_sn2 {
 	u8 type;		/* type of notification */
 
 	/* the following two fields are only used if type == XPC_N_CALL */
@@ -325,9 +374,20 @@ struct xpc_notify {
 	void *key;		/* pointer to user's key */
 };
 
-/* struct xpc_notify type of notification */
+/* struct xpc_notify_sn2 type of notification */
+
+#define	XPC_N_CALL	0x01	/* notify function provided by user */
 
-#define	XPC_N_CALL		0x01	/* notify function provided by user */
+/*
+ * Define uv's version of the notify entry. It additionally is used to allocate
+ * a msg slot on the remote partition into which is copied a sent message.
+ */
+struct xpc_send_msg_slot_uv {
+	struct xpc_fifo_entry_uv next;
+	unsigned int msg_slot_number;
+	xpc_notify_func func;	/* user's notify function */
+	void *key;		/* pointer to user's key */
+};
 
 /*
  * Define the structure that manages all the stuff required by a channel. In
@@ -339,8 +399,12 @@ struct xpc_notify {
  * There is an array of these structures for each remote partition. It is
  * allocated at the time a partition becomes active. The array contains one
  * of these structures for each potential channel connection to that partition.
+ */
+
+/*
+ * The following is sn2 only.
  *
- * Each of these structures manages two message queues (circular buffers).
+ * Each channel structure manages two message queues (circular buffers).
  * They are allocated at the time a channel connection is made. One of
  * these message queues (local_msgqueue) holds the locally created messages
  * that are destined for the remote partition. The other of these message
@@ -407,58 +471,72 @@ struct xpc_notify {
  *	new messages, by the clearing of the message flags of the acknowledged
  *	messages.
  */
+
+struct xpc_channel_sn2 {
+	struct xpc_openclose_args *local_openclose_args; /* args passed on */
+					     /* opening or closing of channel */
+
+	void *local_msgqueue_base;	/* base address of kmalloc'd space */
+	struct xpc_msg_sn2 *local_msgqueue;	/* local message queue */
+	void *remote_msgqueue_base;	/* base address of kmalloc'd space */
+	struct xpc_msg_sn2 *remote_msgqueue; /* cached copy of remote */
+					   /* partition's local message queue */
+	unsigned long remote_msgqueue_pa; /* phys addr of remote partition's */
+					  /* local message queue */
+
+	struct xpc_notify_sn2 *notify_queue;/* notify queue for messages sent */
+
+	/* various flavors of local and remote Get/Put values */
+
+	struct xpc_gp_sn2 *local_GP;	/* local Get/Put values */
+	struct xpc_gp_sn2 remote_GP;	/* remote Get/Put values */
+	struct xpc_gp_sn2 w_local_GP;	/* working local Get/Put values */
+	struct xpc_gp_sn2 w_remote_GP;	/* working remote Get/Put values */
+	s64 next_msg_to_pull;	/* Put value of next msg to pull */
+
+	struct mutex msg_to_pull_mutex;	/* next msg to pull serialization */
+};
+
+struct xpc_channel_uv {
+	unsigned long remote_notify_mq_gpa;	/* gru phys address of remote */
+						/* partition's notify mq */
+
+	struct xpc_send_msg_slot_uv *send_msg_slots;
+	struct xpc_notify_mq_msg_uv *recv_msg_slots;
+
+	struct xpc_fifo_head_uv msg_slot_free_list;
+	struct xpc_fifo_head_uv recv_msg_list;	/* deliverable payloads */
+};
+
 struct xpc_channel {
 	short partid;		/* ID of remote partition connected */
 	spinlock_t lock;	/* lock for updating this structure */
-	u32 flags;		/* general flags */
+	unsigned int flags;	/* general flags */
 
 	enum xp_retval reason;	/* reason why channel is disconnect'g */
 	int reason_line;	/* line# disconnect initiated from */
 
 	u16 number;		/* channel # */
 
-	u16 msg_size;		/* sizeof each msg entry */
+	u16 entry_size;		/* sizeof each msg entry */
 	u16 local_nentries;	/* #of msg entries in local msg queue */
 	u16 remote_nentries;	/* #of msg entries in remote msg queue */
 
-	void *local_msgqueue_base;	/* base address of kmalloc'd space */
-	struct xpc_msg *local_msgqueue;	/* local message queue */
-	void *remote_msgqueue_base;	/* base address of kmalloc'd space */
-	struct xpc_msg *remote_msgqueue; /* cached copy of remote partition's */
-					 /* local message queue */
-	u64 remote_msgqueue_pa;	/* phys addr of remote partition's */
-				/* local message queue */
-
 	atomic_t references;	/* #of external references to queues */
 
 	atomic_t n_on_msg_allocate_wq;	/* #on msg allocation wait queue */
 	wait_queue_head_t msg_allocate_wq;	/* msg allocation wait queue */
 
-	u8 delayed_IPI_flags;	/* IPI flags received, but delayed */
+	u8 delayed_chctl_flags;	/* chctl flags received, but delayed */
 				/* action until channel disconnected */
 
-	/* queue of msg senders who want to be notified when msg received */
-
 	atomic_t n_to_notify;	/* #of msg senders to notify */
-	struct xpc_notify *notify_queue;    /* notify queue for messages sent */
 
 	xpc_channel_func func;	/* user's channel function */
 	void *key;		/* pointer to user's key */
 
-	struct mutex msg_to_pull_mutex;	/* next msg to pull serialization */
 	struct completion wdisconnect_wait;    /* wait for channel disconnect */
 
-	struct xpc_openclose_args *local_openclose_args; /* args passed on */
-					     /* opening or closing of channel */
-
-	/* various flavors of local and remote Get/Put values */
-
-	struct xpc_gp *local_GP;	/* local Get/Put values */
-	struct xpc_gp remote_GP;	/* remote Get/Put values */
-	struct xpc_gp w_local_GP;	/* working local Get/Put values */
-	struct xpc_gp w_remote_GP;	/* working remote Get/Put values */
-	s64 next_msg_to_pull;	/* Put value of next msg to pull */
-
 	/* kthread management related fields */
 
 	atomic_t kthreads_assigned;	/* #of kthreads assigned to channel */
@@ -469,6 +547,11 @@ struct xpc_channel {
 
 	wait_queue_head_t idle_wq;	/* idle kthread wait queue */
 
+	union {
+		struct xpc_channel_sn2 sn2;
+		struct xpc_channel_uv uv;
+	} sn;
+
 } ____cacheline_aligned;
 
 /* struct xpc_channel flags */
@@ -501,33 +584,128 @@ struct xpc_channel {
 #define	XPC_C_WDISCONNECT	0x00040000  /* waiting for channel disconnect */
 
 /*
- * Manages channels on a partition basis. There is one of these structures
+ * The channel control flags (chctl) union consists of a 64-bit variable which
+ * is divided up into eight bytes, ordered from right to left. Byte zero
+ * pertains to channel 0, byte one to channel 1, and so on. Each channel's byte
+ * can have one or more of the chctl flags set in it.
+ */
+
+union xpc_channel_ctl_flags {
+	u64 all_flags;
+	u8 flags[XPC_MAX_NCHANNELS];
+};
+
+/* chctl flags */
+#define	XPC_CHCTL_CLOSEREQUEST	0x01
+#define	XPC_CHCTL_CLOSEREPLY	0x02
+#define	XPC_CHCTL_OPENREQUEST	0x04
+#define	XPC_CHCTL_OPENREPLY	0x08
+#define	XPC_CHCTL_MSGREQUEST	0x10
+
+#define XPC_OPENCLOSE_CHCTL_FLAGS \
+			(XPC_CHCTL_CLOSEREQUEST | XPC_CHCTL_CLOSEREPLY | \
+			 XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY)
+#define XPC_MSG_CHCTL_FLAGS	XPC_CHCTL_MSGREQUEST
+
+static inline int
+xpc_any_openclose_chctl_flags_set(union xpc_channel_ctl_flags *chctl)
+{
+	int ch_number;
+
+	for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) {
+		if (chctl->flags[ch_number] & XPC_OPENCLOSE_CHCTL_FLAGS)
+			return 1;
+	}
+	return 0;
+}
+
+static inline int
+xpc_any_msg_chctl_flags_set(union xpc_channel_ctl_flags *chctl)
+{
+	int ch_number;
+
+	for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) {
+		if (chctl->flags[ch_number] & XPC_MSG_CHCTL_FLAGS)
+			return 1;
+	}
+	return 0;
+}
+
+/*
+ * Manage channels on a partition basis. There is one of these structures
  * for each partition (a partition will never utilize the structure that
  * represents itself).
  */
+
+struct xpc_partition_sn2 {
+	unsigned long remote_amos_page_pa; /* paddr of partition's amos page */
+	int activate_IRQ_nasid;	/* active partition's act/deact nasid */
+	int activate_IRQ_phys_cpuid;	/* active part's act/deact phys cpuid */
+
+	unsigned long remote_vars_pa;	/* phys addr of partition's vars */
+	unsigned long remote_vars_part_pa; /* paddr of partition's vars part */
+	u8 remote_vars_version;	/* version# of partition's vars */
+
+	void *local_GPs_base;	/* base address of kmalloc'd space */
+	struct xpc_gp_sn2 *local_GPs;	/* local Get/Put values */
+	void *remote_GPs_base;	/* base address of kmalloc'd space */
+	struct xpc_gp_sn2 *remote_GPs;	/* copy of remote partition's local */
+					/* Get/Put values */
+	unsigned long remote_GPs_pa; /* phys addr of remote partition's local */
+				     /* Get/Put values */
+
+	void *local_openclose_args_base;   /* base address of kmalloc'd space */
+	struct xpc_openclose_args *local_openclose_args;      /* local's args */
+	unsigned long remote_openclose_args_pa;	/* phys addr of remote's args */
+
+	int notify_IRQ_nasid;	/* nasid of where to send notify IRQs */
+	int notify_IRQ_phys_cpuid;	/* CPUID of where to send notify IRQs */
+	char notify_IRQ_owner[8];	/* notify IRQ's owner's name */
+
+	struct amo *remote_chctl_amo_va; /* addr of remote chctl flags' amo */
+	struct amo *local_chctl_amo_va;	/* address of chctl flags' amo */
+
+	struct timer_list dropped_notify_IRQ_timer;	/* dropped IRQ timer */
+};
+
+struct xpc_partition_uv {
+	unsigned long remote_activate_mq_gpa;	/* gru phys address of remote */
+						/* partition's activate mq */
+	spinlock_t flags_lock;	/* protect updating of flags */
+	unsigned int flags;	/* general flags */
+	u8 remote_act_state;	/* remote partition's act_state */
+	u8 act_state_req;	/* act_state request from remote partition */
+	enum xp_retval reason;	/* reason for deactivate act_state request */
+	u64 heartbeat;		/* incremented by remote partition */
+};
+
+/* struct xpc_partition_uv flags */
+
+#define XPC_P_HEARTBEAT_OFFLINE_UV	0x00000001
+#define XPC_P_ENGAGED_UV		0x00000002
+
+/* struct xpc_partition_uv act_state change requests */
+
+#define XPC_P_ASR_ACTIVATE_UV		0x01
+#define XPC_P_ASR_REACTIVATE_UV		0x02
+#define XPC_P_ASR_DEACTIVATE_UV		0x03
+
 struct xpc_partition {
 
 	/* XPC HB infrastructure */
 
 	u8 remote_rp_version;	/* version# of partition's rsvd pg */
-	struct timespec remote_rp_stamp; /* time when rsvd pg was initialized */
-	u64 remote_rp_pa;	/* phys addr of partition's rsvd pg */
-	u64 remote_vars_pa;	/* phys addr of partition's vars */
-	u64 remote_vars_part_pa;	/* phys addr of partition's vars part */
+	unsigned long remote_rp_ts_jiffies; /* timestamp when rsvd pg setup */
+	unsigned long remote_rp_pa;	/* phys addr of partition's rsvd pg */
 	u64 last_heartbeat;	/* HB at last read */
-	u64 remote_amos_page_pa;	/* phys addr of partition's amos page */
-	int remote_act_nasid;	/* active part's act/deact nasid */
-	int remote_act_phys_cpuid;	/* active part's act/deact phys cpuid */
-	u32 act_IRQ_rcvd;	/* IRQs since activation */
+	u32 activate_IRQ_rcvd;	/* IRQs since activation */
 	spinlock_t act_lock;	/* protect updating of act_state */
 	u8 act_state;		/* from XPC HB viewpoint */
-	u8 remote_vars_version;	/* version# of partition's vars */
 	enum xp_retval reason;	/* reason partition is deactivating */
 	int reason_line;	/* line# deactivation initiated from */
-	int reactivate_nasid;	/* nasid in partition to reactivate */
 
-	unsigned long disengage_request_timeout;	/* timeout in jiffies */
-	struct timer_list disengage_request_timer;
+	unsigned long disengage_timeout;	/* timeout in jiffies */
+	struct timer_list disengage_timer;
 
 	/* XPC infrastructure referencing and teardown control */
 
@@ -535,85 +713,63 @@ struct xpc_partition {
 	wait_queue_head_t teardown_wq;	/* kthread waiting to teardown infra */
 	atomic_t references;	/* #of references to infrastructure */
 
-	/*
-	 * NONE OF THE PRECEDING FIELDS OF THIS STRUCTURE WILL BE CLEARED WHEN
-	 * XPC SETS UP THE NECESSARY INFRASTRUCTURE TO SUPPORT CROSS PARTITION
-	 * COMMUNICATION. ALL OF THE FOLLOWING FIELDS WILL BE CLEARED. (THE
-	 * 'nchannels' FIELD MUST BE THE FIRST OF THE FIELDS TO BE CLEARED.)
-	 */
-
 	u8 nchannels;		/* #of defined channels supported */
 	atomic_t nchannels_active;  /* #of channels that are not DISCONNECTED */
 	atomic_t nchannels_engaged;  /* #of channels engaged with remote part */
 	struct xpc_channel *channels;	/* array of channel structures */
 
-	void *local_GPs_base;	/* base address of kmalloc'd space */
-	struct xpc_gp *local_GPs;	/* local Get/Put values */
-	void *remote_GPs_base;	/* base address of kmalloc'd space */
-	struct xpc_gp *remote_GPs;	/* copy of remote partition's local */
-					/* Get/Put values */
-	u64 remote_GPs_pa;	/* phys address of remote partition's local */
-				/* Get/Put values */
+	/* fields used for managing channel avialability and activity */
 
-	/* fields used to pass args when opening or closing a channel */
+	union xpc_channel_ctl_flags chctl; /* chctl flags yet to be processed */
+	spinlock_t chctl_lock;	/* chctl flags lock */
 
-	void *local_openclose_args_base;   /* base address of kmalloc'd space */
-	struct xpc_openclose_args *local_openclose_args;      /* local's args */
 	void *remote_openclose_args_base;  /* base address of kmalloc'd space */
 	struct xpc_openclose_args *remote_openclose_args; /* copy of remote's */
 							  /* args */
-	u64 remote_openclose_args_pa;	/* phys addr of remote's args */
-
-	/* IPI sending, receiving and handling related fields */
-
-	int remote_IPI_nasid;	/* nasid of where to send IPIs */
-	int remote_IPI_phys_cpuid;	/* phys CPU ID of where to send IPIs */
-	AMO_t *remote_IPI_amo_va;    /* address of remote IPI AMO_t structure */
-
-	AMO_t *local_IPI_amo_va;	/* address of IPI AMO_t structure */
-	u64 local_IPI_amo;	/* IPI amo flags yet to be handled */
-	char IPI_owner[8];	/* IPI owner's name */
-	struct timer_list dropped_IPI_timer;	/* dropped IPI timer */
-
-	spinlock_t IPI_lock;	/* IPI handler lock */
 
 	/* channel manager related fields */
 
 	atomic_t channel_mgr_requests;	/* #of requests to activate chan mgr */
 	wait_queue_head_t channel_mgr_wq;	/* channel mgr's wait queue */
 
+	union {
+		struct xpc_partition_sn2 sn2;
+		struct xpc_partition_uv uv;
+	} sn;
+
 } ____cacheline_aligned;
 
 /* struct xpc_partition act_state values (for XPC HB) */
 
-#define	XPC_P_INACTIVE		0x00	/* partition is not active */
-#define XPC_P_ACTIVATION_REQ	0x01	/* created thread to activate */
-#define XPC_P_ACTIVATING	0x02	/* activation thread started */
-#define XPC_P_ACTIVE		0x03	/* xpc_partition_up() was called */
-#define XPC_P_DEACTIVATING	0x04	/* partition deactivation initiated */
+#define	XPC_P_AS_INACTIVE	0x00	/* partition is not active */
+#define XPC_P_AS_ACTIVATION_REQ	0x01	/* created thread to activate */
+#define XPC_P_AS_ACTIVATING	0x02	/* activation thread started */
+#define XPC_P_AS_ACTIVE		0x03	/* xpc_partition_up() was called */
+#define XPC_P_AS_DEACTIVATING	0x04	/* partition deactivation initiated */
 
 #define XPC_DEACTIVATE_PARTITION(_p, _reason) \
 			xpc_deactivate_partition(__LINE__, (_p), (_reason))
 
 /* struct xpc_partition setup_state values */
 
-#define XPC_P_UNSET		0x00	/* infrastructure was never setup */
-#define XPC_P_SETUP		0x01	/* infrastructure is setup */
-#define XPC_P_WTEARDOWN		0x02	/* waiting to teardown infrastructure */
-#define XPC_P_TORNDOWN		0x03	/* infrastructure is torndown */
+#define XPC_P_SS_UNSET		0x00	/* infrastructure was never setup */
+#define XPC_P_SS_SETUP		0x01	/* infrastructure is setup */
+#define XPC_P_SS_WTEARDOWN	0x02	/* waiting to teardown infrastructure */
+#define XPC_P_SS_TORNDOWN	0x03	/* infrastructure is torndown */
 
 /*
- * struct xpc_partition IPI_timer #of seconds to wait before checking for
- * dropped IPIs. These occur whenever an IPI amo write doesn't complete until
- * after the IPI was received.
+ * struct xpc_partition_sn2's dropped notify IRQ timer is set to wait the
+ * following interval #of seconds before checking for dropped notify IRQs.
+ * These can occur whenever an IRQ's associated amo write doesn't complete
+ * until after the IRQ was received.
  */
-#define XPC_P_DROPPED_IPI_WAIT	(0.25 * HZ)
+#define XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL	(0.25 * HZ)
 
 /* number of seconds to wait for other partitions to disengage */
-#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT	90
+#define XPC_DISENGAGE_DEFAULT_TIMELIMIT		90
 
-/* interval in seconds to print 'waiting disengagement' messages */
-#define XPC_DISENGAGE_PRINTMSG_INTERVAL		10
+/* interval in seconds to print 'waiting deactivation' messages */
+#define XPC_DEACTIVATE_PRINTMSG_INTERVAL	10
 
 #define XPC_PARTID(_p)	((short)((_p) - &xpc_partitions[0]))
 
@@ -623,33 +779,92 @@ extern struct xpc_registration xpc_registrations[];
 /* found in xpc_main.c */
 extern struct device *xpc_part;
 extern struct device *xpc_chan;
-extern int xpc_disengage_request_timelimit;
-extern int xpc_disengage_request_timedout;
-extern irqreturn_t xpc_notify_IRQ_handler(int, void *);
-extern void xpc_dropped_IPI_check(struct xpc_partition *);
+extern int xpc_disengage_timelimit;
+extern int xpc_disengage_timedout;
+extern int xpc_activate_IRQ_rcvd;
+extern spinlock_t xpc_activate_IRQ_rcvd_lock;
+extern wait_queue_head_t xpc_activate_IRQ_wq;
+extern void *xpc_heartbeating_to_mask;
+extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **);
 extern void xpc_activate_partition(struct xpc_partition *);
 extern void xpc_activate_kthreads(struct xpc_channel *, int);
 extern void xpc_create_kthreads(struct xpc_channel *, int, int);
 extern void xpc_disconnect_wait(int);
+extern int (*xpc_setup_partitions_sn) (void);
+extern enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *, u64 *,
+							 unsigned long *,
+							 size_t *);
+extern int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *);
+extern void (*xpc_heartbeat_init) (void);
+extern void (*xpc_heartbeat_exit) (void);
+extern void (*xpc_increment_heartbeat) (void);
+extern void (*xpc_offline_heartbeat) (void);
+extern void (*xpc_online_heartbeat) (void);
+extern enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *);
+extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *);
+extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *);
+extern enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *);
+extern void (*xpc_teardown_msg_structures) (struct xpc_channel *);
+extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *);
+extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int);
+extern int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *);
+extern void *(*xpc_get_deliverable_payload) (struct xpc_channel *);
+extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *,
+						 unsigned long, int);
+extern void (*xpc_request_partition_reactivation) (struct xpc_partition *);
+extern void (*xpc_request_partition_deactivation) (struct xpc_partition *);
+extern void (*xpc_cancel_partition_deactivation_request) (
+							struct xpc_partition *);
+extern void (*xpc_process_activate_IRQ_rcvd) (void);
+extern enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *);
+extern void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *);
+
+extern void (*xpc_indicate_partition_engaged) (struct xpc_partition *);
+extern int (*xpc_partition_engaged) (short);
+extern int (*xpc_any_partition_engaged) (void);
+extern void (*xpc_indicate_partition_disengaged) (struct xpc_partition *);
+extern void (*xpc_assume_partition_disengaged) (short);
+
+extern void (*xpc_send_chctl_closerequest) (struct xpc_channel *,
+					    unsigned long *);
+extern void (*xpc_send_chctl_closereply) (struct xpc_channel *,
+					  unsigned long *);
+extern void (*xpc_send_chctl_openrequest) (struct xpc_channel *,
+					   unsigned long *);
+extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *);
+
+extern void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *,
+					    unsigned long);
+
+extern enum xp_retval (*xpc_send_payload) (struct xpc_channel *, u32, void *,
+					   u16, u8, xpc_notify_func, void *);
+extern void (*xpc_received_payload) (struct xpc_channel *, void *);
+
+/* found in xpc_sn2.c */
+extern int xpc_init_sn2(void);
+extern void xpc_exit_sn2(void);
+
+/* found in xpc_uv.c */
+extern int xpc_init_uv(void);
+extern void xpc_exit_uv(void);
 
 /* found in xpc_partition.c */
 extern int xpc_exiting;
-extern struct xpc_vars *xpc_vars;
+extern int xpc_nasid_mask_nlongs;
 extern struct xpc_rsvd_page *xpc_rsvd_page;
-extern struct xpc_vars_part *xpc_vars_part;
-extern struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
-extern char *xpc_remote_copy_buffer;
-extern void *xpc_remote_copy_buffer_base;
+extern unsigned long *xpc_mach_nasids;
+extern struct xpc_partition *xpc_partitions;
 extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **);
-extern struct xpc_rsvd_page *xpc_rsvd_page_init(void);
-extern void xpc_allow_IPI_ops(void);
-extern void xpc_restrict_IPI_ops(void);
-extern int xpc_identify_act_IRQ_sender(void);
+extern int xpc_setup_rsvd_page(void);
+extern void xpc_teardown_rsvd_page(void);
+extern int xpc_identify_activate_IRQ_sender(void);
 extern int xpc_partition_disengaged(struct xpc_partition *);
 extern enum xp_retval xpc_mark_partition_active(struct xpc_partition *);
 extern void xpc_mark_partition_inactive(struct xpc_partition *);
 extern void xpc_discovery(void);
-extern void xpc_check_remote_hb(void);
+extern enum xp_retval xpc_get_remote_rp(int, unsigned long *,
+					struct xpc_rsvd_page *,
+					unsigned long *);
 extern void xpc_deactivate_partition(const int, struct xpc_partition *,
 				     enum xp_retval);
 extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *);
@@ -657,21 +872,52 @@ extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *);
 /* found in xpc_channel.c */
 extern void xpc_initiate_connect(int);
 extern void xpc_initiate_disconnect(int);
-extern enum xp_retval xpc_initiate_allocate(short, int, u32, void **);
-extern enum xp_retval xpc_initiate_send(short, int, void *);
-extern enum xp_retval xpc_initiate_send_notify(short, int, void *,
+extern enum xp_retval xpc_allocate_msg_wait(struct xpc_channel *);
+extern enum xp_retval xpc_initiate_send(short, int, u32, void *, u16);
+extern enum xp_retval xpc_initiate_send_notify(short, int, u32, void *, u16,
 					       xpc_notify_func, void *);
 extern void xpc_initiate_received(short, int, void *);
-extern enum xp_retval xpc_setup_infrastructure(struct xpc_partition *);
-extern enum xp_retval xpc_pull_remote_vars_part(struct xpc_partition *);
-extern void xpc_process_channel_activity(struct xpc_partition *);
+extern void xpc_process_sent_chctl_flags(struct xpc_partition *);
 extern void xpc_connected_callout(struct xpc_channel *);
-extern void xpc_deliver_msg(struct xpc_channel *);
+extern void xpc_deliver_payload(struct xpc_channel *);
 extern void xpc_disconnect_channel(const int, struct xpc_channel *,
 				   enum xp_retval, unsigned long *);
 extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval);
 extern void xpc_partition_going_down(struct xpc_partition *, enum xp_retval);
-extern void xpc_teardown_infrastructure(struct xpc_partition *);
+
+static inline int
+xpc_hb_allowed(short partid, void *heartbeating_to_mask)
+{
+	return test_bit(partid, heartbeating_to_mask);
+}
+
+static inline int
+xpc_any_hbs_allowed(void)
+{
+	DBUG_ON(xpc_heartbeating_to_mask == NULL);
+	return !bitmap_empty(xpc_heartbeating_to_mask, xp_max_npartitions);
+}
+
+static inline void
+xpc_allow_hb(short partid)
+{
+	DBUG_ON(xpc_heartbeating_to_mask == NULL);
+	set_bit(partid, xpc_heartbeating_to_mask);
+}
+
+static inline void
+xpc_disallow_hb(short partid)
+{
+	DBUG_ON(xpc_heartbeating_to_mask == NULL);
+	clear_bit(partid, xpc_heartbeating_to_mask);
+}
+
+static inline void
+xpc_disallow_all_hbs(void)
+{
+	DBUG_ON(xpc_heartbeating_to_mask == NULL);
+	bitmap_zero(xpc_heartbeating_to_mask, xp_max_npartitions);
+}
 
 static inline void
 xpc_wakeup_channel_mgr(struct xpc_partition *part)
@@ -713,7 +959,7 @@ xpc_part_deref(struct xpc_partition *part)
 	s32 refs = atomic_dec_return(&part->references);
 
 	DBUG_ON(refs < 0);
-	if (refs == 0 && part->setup_state == XPC_P_WTEARDOWN)
+	if (refs == 0 && part->setup_state == XPC_P_SS_WTEARDOWN)
 		wake_up(&part->teardown_wq);
 }
 
@@ -723,7 +969,7 @@ xpc_part_ref(struct xpc_partition *part)
 	int setup;
 
 	atomic_inc(&part->references);
-	setup = (part->setup_state == XPC_P_SETUP);
+	setup = (part->setup_state == XPC_P_SS_SETUP);
 	if (!setup)
 		xpc_part_deref(part);
 
@@ -741,416 +987,4 @@ xpc_part_ref(struct xpc_partition *part)
 		(_p)->reason_line = _line; \
 	}
 
-/*
- * This next set of inlines are used to keep track of when a partition is
- * potentially engaged in accessing memory belonging to another partition.
- */
-
-static inline void
-xpc_mark_partition_engaged(struct xpc_partition *part)
-{
-	unsigned long irq_flags;
-	AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
-				   (XPC_ENGAGED_PARTITIONS_AMO *
-				    sizeof(AMO_t)));
-
-	local_irq_save(irq_flags);
-
-	/* set bit corresponding to our partid in remote partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
-			 (1UL << sn_partition_id));
-	/*
-	 * We must always use the nofault function regardless of whether we
-	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-	 * didn't, we'd never know that the other partition is down and would
-	 * keep sending IPIs and AMOs to it until the heartbeat times out.
-	 */
-	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
-							       variable),
-						     xp_nofault_PIOR_target));
-
-	local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_mark_partition_disengaged(struct xpc_partition *part)
-{
-	unsigned long irq_flags;
-	AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
-				   (XPC_ENGAGED_PARTITIONS_AMO *
-				    sizeof(AMO_t)));
-
-	local_irq_save(irq_flags);
-
-	/* clear bit corresponding to our partid in remote partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
-			 ~(1UL << sn_partition_id));
-	/*
-	 * We must always use the nofault function regardless of whether we
-	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-	 * didn't, we'd never know that the other partition is down and would
-	 * keep sending IPIs and AMOs to it until the heartbeat times out.
-	 */
-	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
-							       variable),
-						     xp_nofault_PIOR_target));
-
-	local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_request_partition_disengage(struct xpc_partition *part)
-{
-	unsigned long irq_flags;
-	AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
-				   (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
-
-	local_irq_save(irq_flags);
-
-	/* set bit corresponding to our partid in remote partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
-			 (1UL << sn_partition_id));
-	/*
-	 * We must always use the nofault function regardless of whether we
-	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-	 * didn't, we'd never know that the other partition is down and would
-	 * keep sending IPIs and AMOs to it until the heartbeat times out.
-	 */
-	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
-							       variable),
-						     xp_nofault_PIOR_target));
-
-	local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_cancel_partition_disengage_request(struct xpc_partition *part)
-{
-	unsigned long irq_flags;
-	AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa +
-				   (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
-
-	local_irq_save(irq_flags);
-
-	/* clear bit corresponding to our partid in remote partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
-			 ~(1UL << sn_partition_id));
-	/*
-	 * We must always use the nofault function regardless of whether we
-	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-	 * didn't, we'd never know that the other partition is down and would
-	 * keep sending IPIs and AMOs to it until the heartbeat times out.
-	 */
-	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
-							       variable),
-						     xp_nofault_PIOR_target));
-
-	local_irq_restore(irq_flags);
-}
-
-static inline u64
-xpc_partition_engaged(u64 partid_mask)
-{
-	AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
-
-	/* return our partition's AMO variable ANDed with partid_mask */
-	return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
-		partid_mask);
-}
-
-static inline u64
-xpc_partition_disengage_requested(u64 partid_mask)
-{
-	AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
-
-	/* return our partition's AMO variable ANDed with partid_mask */
-	return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
-		partid_mask);
-}
-
-static inline void
-xpc_clear_partition_engaged(u64 partid_mask)
-{
-	AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
-
-	/* clear bit(s) based on partid_mask in our partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
-			 ~partid_mask);
-}
-
-static inline void
-xpc_clear_partition_disengage_request(u64 partid_mask)
-{
-	AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
-
-	/* clear bit(s) based on partid_mask in our partition's AMO */
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
-			 ~partid_mask);
-}
-
-/*
- * The following set of macros and inlines are used for the sending and
- * receiving of IPIs (also known as IRQs). There are two flavors of IPIs,
- * one that is associated with partition activity (SGI_XPC_ACTIVATE) and
- * the other that is associated with channel activity (SGI_XPC_NOTIFY).
- */
-
-static inline u64
-xpc_IPI_receive(AMO_t *amo)
-{
-	return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR);
-}
-
-static inline enum xp_retval
-xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector)
-{
-	int ret = 0;
-	unsigned long irq_flags;
-
-	local_irq_save(irq_flags);
-
-	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, flag);
-	sn_send_IPI_phys(nasid, phys_cpuid, vector, 0);
-
-	/*
-	 * We must always use the nofault function regardless of whether we
-	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
-	 * didn't, we'd never know that the other partition is down and would
-	 * keep sending IPIs and AMOs to it until the heartbeat times out.
-	 */
-	ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable),
-						     xp_nofault_PIOR_target));
-
-	local_irq_restore(irq_flags);
-
-	return ((ret == 0) ? xpSuccess : xpPioReadError);
-}
-
-/*
- * IPIs associated with SGI_XPC_ACTIVATE IRQ.
- */
-
-/*
- * Flag the appropriate AMO variable and send an IPI to the specified node.
- */
-static inline void
-xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid,
-		      int to_phys_cpuid)
-{
-	int w_index = XPC_NASID_W_INDEX(from_nasid);
-	int b_index = XPC_NASID_B_INDEX(from_nasid);
-	AMO_t *amos = (AMO_t *)__va(amos_page_pa +
-				    (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t)));
-
-	(void)xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid,
-			   to_phys_cpuid, SGI_XPC_ACTIVATE);
-}
-
-static inline void
-xpc_IPI_send_activate(struct xpc_vars *vars)
-{
-	xpc_activate_IRQ_send(vars->amos_page_pa, cnodeid_to_nasid(0),
-			      vars->act_nasid, vars->act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_activated(struct xpc_partition *part)
-{
-	xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
-			      part->remote_act_nasid,
-			      part->remote_act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_reactivate(struct xpc_partition *part)
-{
-	xpc_activate_IRQ_send(xpc_vars->amos_page_pa, part->reactivate_nasid,
-			      xpc_vars->act_nasid, xpc_vars->act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_disengage(struct xpc_partition *part)
-{
-	xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
-			      part->remote_act_nasid,
-			      part->remote_act_phys_cpuid);
-}
-
-/*
- * IPIs associated with SGI_XPC_NOTIFY IRQ.
- */
-
-/*
- * Send an IPI to the remote partition that is associated with the
- * specified channel.
- */
-#define XPC_NOTIFY_IRQ_SEND(_ch, _ipi_f, _irq_f) \
-		xpc_notify_IRQ_send(_ch, _ipi_f, #_ipi_f, _irq_f)
-
-static inline void
-xpc_notify_IRQ_send(struct xpc_channel *ch, u8 ipi_flag, char *ipi_flag_string,
-		    unsigned long *irq_flags)
-{
-	struct xpc_partition *part = &xpc_partitions[ch->partid];
-	enum xp_retval ret;
-
-	if (likely(part->act_state != XPC_P_DEACTIVATING)) {
-		ret = xpc_IPI_send(part->remote_IPI_amo_va,
-				   (u64)ipi_flag << (ch->number * 8),
-				   part->remote_IPI_nasid,
-				   part->remote_IPI_phys_cpuid, SGI_XPC_NOTIFY);
-		dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n",
-			ipi_flag_string, ch->partid, ch->number, ret);
-		if (unlikely(ret != xpSuccess)) {
-			if (irq_flags != NULL)
-				spin_unlock_irqrestore(&ch->lock, *irq_flags);
-			XPC_DEACTIVATE_PARTITION(part, ret);
-			if (irq_flags != NULL)
-				spin_lock_irqsave(&ch->lock, *irq_flags);
-		}
-	}
-}
-
-/*
- * Make it look like the remote partition, which is associated with the
- * specified channel, sent us an IPI. This faked IPI will be handled
- * by xpc_dropped_IPI_check().
- */
-#define XPC_NOTIFY_IRQ_SEND_LOCAL(_ch, _ipi_f) \
-		xpc_notify_IRQ_send_local(_ch, _ipi_f, #_ipi_f)
-
-static inline void
-xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag,
-			  char *ipi_flag_string)
-{
-	struct xpc_partition *part = &xpc_partitions[ch->partid];
-
-	FETCHOP_STORE_OP(TO_AMO((u64)&part->local_IPI_amo_va->variable),
-			 FETCHOP_OR, ((u64)ipi_flag << (ch->number * 8)));
-	dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n",
-		ipi_flag_string, ch->partid, ch->number);
-}
-
-/*
- * The sending and receiving of IPIs includes the setting of an AMO variable
- * to indicate the reason the IPI was sent. The 64-bit variable is divided
- * up into eight bytes, ordered from right to left. Byte zero pertains to
- * channel 0, byte one to channel 1, and so on. Each byte is described by
- * the following IPI flags.
- */
-
-#define	XPC_IPI_CLOSEREQUEST	0x01
-#define	XPC_IPI_CLOSEREPLY	0x02
-#define	XPC_IPI_OPENREQUEST	0x04
-#define	XPC_IPI_OPENREPLY	0x08
-#define	XPC_IPI_MSGREQUEST	0x10
-
-/* given an AMO variable and a channel#, get its associated IPI flags */
-#define XPC_GET_IPI_FLAGS(_amo, _c)	((u8) (((_amo) >> ((_c) * 8)) & 0xff))
-#define XPC_SET_IPI_FLAGS(_amo, _c, _f)	(_amo) |= ((u64) (_f) << ((_c) * 8))
-
-#define	XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0fUL)
-#define XPC_ANY_MSG_IPI_FLAGS_SET(_amo)       ((_amo) & 0x1010101010101010UL)
-
-static inline void
-xpc_IPI_send_closerequest(struct xpc_channel *ch, unsigned long *irq_flags)
-{
-	struct xpc_openclose_args *args = ch->local_openclose_args;
-
-	args->reason = ch->reason;
-
-	XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREQUEST, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_closereply(struct xpc_channel *ch, unsigned long *irq_flags)
-{
-	XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREPLY, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_openrequest(struct xpc_channel *ch, unsigned long *irq_flags)
-{
-	struct xpc_openclose_args *args = ch->local_openclose_args;
-
-	args->msg_size = ch->msg_size;
-	args->local_nentries = ch->local_nentries;
-
-	XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREQUEST, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_openreply(struct xpc_channel *ch, unsigned long *irq_flags)
-{
-	struct xpc_openclose_args *args = ch->local_openclose_args;
-
-	args->remote_nentries = ch->remote_nentries;
-	args->local_nentries = ch->local_nentries;
-	args->local_msgqueue_pa = __pa(ch->local_msgqueue);
-
-	XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREPLY, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_msgrequest(struct xpc_channel *ch)
-{
-	XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_MSGREQUEST, NULL);
-}
-
-static inline void
-xpc_IPI_send_local_msgrequest(struct xpc_channel *ch)
-{
-	XPC_NOTIFY_IRQ_SEND_LOCAL(ch, XPC_IPI_MSGREQUEST);
-}
-
-/*
- * Memory for XPC's AMO variables is allocated by the MSPEC driver. These
- * pages are located in the lowest granule. The lowest granule uses 4k pages
- * for cached references and an alternate TLB handler to never provide a
- * cacheable mapping for the entire region. This will prevent speculative
- * reading of cached copies of our lines from being issued which will cause
- * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
- * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an
- * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition
- * activation and 2 AMO variables for partition deactivation.
- */
-static inline AMO_t *
-xpc_IPI_init(int index)
-{
-	AMO_t *amo = xpc_vars->amos_page + index;
-
-	(void)xpc_IPI_receive(amo);	/* clear AMO variable */
-	return amo;
-}
-
-static inline enum xp_retval
-xpc_map_bte_errors(bte_result_t error)
-{
-	return ((error == BTE_SUCCESS) ? xpSuccess : xpBteCopyError);
-}
-
-/*
- * Check to see if there is any channel activity to/from the specified
- * partition.
- */
-static inline void
-xpc_check_for_channel_activity(struct xpc_partition *part)
-{
-	u64 IPI_amo;
-	unsigned long irq_flags;
-
-	IPI_amo = xpc_IPI_receive(part->local_IPI_amo_va);
-	if (IPI_amo == 0)
-		return;
-
-	spin_lock_irqsave(&part->IPI_lock, irq_flags);
-	part->local_IPI_amo |= IPI_amo;
-	spin_unlock_irqrestore(&part->IPI_lock, irq_flags);
-
-	dev_dbg(xpc_chan, "received IPI from partid=%d, IPI_amo=0x%lx\n",
-		XPC_PARTID(part), IPI_amo);
-
-	xpc_wakeup_channel_mgr(part);
-}
-
 #endif /* _DRIVERS_MISC_SGIXP_XPC_H */
diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
index 9c90c2d..9cd2ebe 100644
--- a/drivers/misc/sgi-xp/xpc_channel.c
+++ b/drivers/misc/sgi-xp/xpc_channel.c
@@ -14,536 +14,10 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/cache.h>
-#include <linux/interrupt.h>
-#include <linux/mutex.h>
-#include <linux/completion.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/sn_sal.h>
+#include <linux/device.h>
 #include "xpc.h"
 
 /*
- * Guarantee that the kzalloc'd memory is cacheline aligned.
- */
-static void *
-xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
-{
-	/* see if kzalloc will give us cachline aligned memory by default */
-	*base = kzalloc(size, flags);
-	if (*base == NULL)
-		return NULL;
-
-	if ((u64)*base == L1_CACHE_ALIGN((u64)*base))
-		return *base;
-
-	kfree(*base);
-
-	/* nope, we'll have to do it ourselves */
-	*base = kzalloc(size + L1_CACHE_BYTES, flags);
-	if (*base == NULL)
-		return NULL;
-
-	return (void *)L1_CACHE_ALIGN((u64)*base);
-}
-
-/*
- * Set up the initial values for the XPartition Communication channels.
- */
-static void
-xpc_initialize_channels(struct xpc_partition *part, short partid)
-{
-	int ch_number;
-	struct xpc_channel *ch;
-
-	for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
-		ch = &part->channels[ch_number];
-
-		ch->partid = partid;
-		ch->number = ch_number;
-		ch->flags = XPC_C_DISCONNECTED;
-
-		ch->local_GP = &part->local_GPs[ch_number];
-		ch->local_openclose_args =
-		    &part->local_openclose_args[ch_number];
-
-		atomic_set(&ch->kthreads_assigned, 0);
-		atomic_set(&ch->kthreads_idle, 0);
-		atomic_set(&ch->kthreads_active, 0);
-
-		atomic_set(&ch->references, 0);
-		atomic_set(&ch->n_to_notify, 0);
-
-		spin_lock_init(&ch->lock);
-		mutex_init(&ch->msg_to_pull_mutex);
-		init_completion(&ch->wdisconnect_wait);
-
-		atomic_set(&ch->n_on_msg_allocate_wq, 0);
-		init_waitqueue_head(&ch->msg_allocate_wq);
-		init_waitqueue_head(&ch->idle_wq);
-	}
-}
-
-/*
- * Setup the infrastructure necessary to support XPartition Communication
- * between the specified remote partition and the local one.
- */
-enum xp_retval
-xpc_setup_infrastructure(struct xpc_partition *part)
-{
-	int ret, cpuid;
-	struct timer_list *timer;
-	short partid = XPC_PARTID(part);
-
-	/*
-	 * Zero out MOST of the entry for this partition. Only the fields
-	 * starting with `nchannels' will be zeroed. The preceding fields must
-	 * remain `viable' across partition ups and downs, since they may be
-	 * referenced during this memset() operation.
-	 */
-	memset(&part->nchannels, 0, sizeof(struct xpc_partition) -
-	       offsetof(struct xpc_partition, nchannels));
-
-	/*
-	 * Allocate all of the channel structures as a contiguous chunk of
-	 * memory.
-	 */
-	part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_NCHANNELS,
-				 GFP_KERNEL);
-	if (part->channels == NULL) {
-		dev_err(xpc_chan, "can't get memory for channels\n");
-		return xpNoMemory;
-	}
-
-	part->nchannels = XPC_NCHANNELS;
-
-	/* allocate all the required GET/PUT values */
-
-	part->local_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE,
-							GFP_KERNEL,
-							&part->local_GPs_base);
-	if (part->local_GPs == NULL) {
-		kfree(part->channels);
-		part->channels = NULL;
-		dev_err(xpc_chan, "can't get memory for local get/put "
-			"values\n");
-		return xpNoMemory;
-	}
-
-	part->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE,
-							 GFP_KERNEL,
-							 &part->
-							 remote_GPs_base);
-	if (part->remote_GPs == NULL) {
-		dev_err(xpc_chan, "can't get memory for remote get/put "
-			"values\n");
-		kfree(part->local_GPs_base);
-		part->local_GPs = NULL;
-		kfree(part->channels);
-		part->channels = NULL;
-		return xpNoMemory;
-	}
-
-	/* allocate all the required open and close args */
-
-	part->local_openclose_args =
-	    xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL,
-					  &part->local_openclose_args_base);
-	if (part->local_openclose_args == NULL) {
-		dev_err(xpc_chan, "can't get memory for local connect args\n");
-		kfree(part->remote_GPs_base);
-		part->remote_GPs = NULL;
-		kfree(part->local_GPs_base);
-		part->local_GPs = NULL;
-		kfree(part->channels);
-		part->channels = NULL;
-		return xpNoMemory;
-	}
-
-	part->remote_openclose_args =
-	    xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL,
-					  &part->remote_openclose_args_base);
-	if (part->remote_openclose_args == NULL) {
-		dev_err(xpc_chan, "can't get memory for remote connect args\n");
-		kfree(part->local_openclose_args_base);
-		part->local_openclose_args = NULL;
-		kfree(part->remote_GPs_base);
-		part->remote_GPs = NULL;
-		kfree(part->local_GPs_base);
-		part->local_GPs = NULL;
-		kfree(part->channels);
-		part->channels = NULL;
-		return xpNoMemory;
-	}
-
-	xpc_initialize_channels(part, partid);
-
-	atomic_set(&part->nchannels_active, 0);
-	atomic_set(&part->nchannels_engaged, 0);
-
-	/* local_IPI_amo were set to 0 by an earlier memset() */
-
-	/* Initialize this partitions AMO_t structure */
-	part->local_IPI_amo_va = xpc_IPI_init(partid);
-
-	spin_lock_init(&part->IPI_lock);
-
-	atomic_set(&part->channel_mgr_requests, 1);
-	init_waitqueue_head(&part->channel_mgr_wq);
-
-	sprintf(part->IPI_owner, "xpc%02d", partid);
-	ret = request_irq(SGI_XPC_NOTIFY, xpc_notify_IRQ_handler, IRQF_SHARED,
-			  part->IPI_owner, (void *)(u64)partid);
-	if (ret != 0) {
-		dev_err(xpc_chan, "can't register NOTIFY IRQ handler, "
-			"errno=%d\n", -ret);
-		kfree(part->remote_openclose_args_base);
-		part->remote_openclose_args = NULL;
-		kfree(part->local_openclose_args_base);
-		part->local_openclose_args = NULL;
-		kfree(part->remote_GPs_base);
-		part->remote_GPs = NULL;
-		kfree(part->local_GPs_base);
-		part->local_GPs = NULL;
-		kfree(part->channels);
-		part->channels = NULL;
-		return xpLackOfResources;
-	}
-
-	/* Setup a timer to check for dropped IPIs */
-	timer = &part->dropped_IPI_timer;
-	init_timer(timer);
-	timer->function = (void (*)(unsigned long))xpc_dropped_IPI_check;
-	timer->data = (unsigned long)part;
-	timer->expires = jiffies + XPC_P_DROPPED_IPI_WAIT;
-	add_timer(timer);
-
-	/*
-	 * With the setting of the partition setup_state to XPC_P_SETUP, we're
-	 * declaring that this partition is ready to go.
-	 */
-	part->setup_state = XPC_P_SETUP;
-
-	/*
-	 * Setup the per partition specific variables required by the
-	 * remote partition to establish channel connections with us.
-	 *
-	 * The setting of the magic # indicates that these per partition
-	 * specific variables are ready to be used.
-	 */
-	xpc_vars_part[partid].GPs_pa = __pa(part->local_GPs);
-	xpc_vars_part[partid].openclose_args_pa =
-	    __pa(part->local_openclose_args);
-	xpc_vars_part[partid].IPI_amo_pa = __pa(part->local_IPI_amo_va);
-	cpuid = raw_smp_processor_id();	/* any CPU in this partition will do */
-	xpc_vars_part[partid].IPI_nasid = cpuid_to_nasid(cpuid);
-	xpc_vars_part[partid].IPI_phys_cpuid = cpu_physical_id(cpuid);
-	xpc_vars_part[partid].nchannels = part->nchannels;
-	xpc_vars_part[partid].magic = XPC_VP_MAGIC1;
-
-	return xpSuccess;
-}
-
-/*
- * Create a wrapper that hides the underlying mechanism for pulling a cacheline
- * (or multiple cachelines) from a remote partition.
- *
- * src must be a cacheline aligned physical address on the remote partition.
- * dst must be a cacheline aligned virtual address on this partition.
- * cnt must be an cacheline sized
- */
-static enum xp_retval
-xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst,
-			   const void *src, size_t cnt)
-{
-	bte_result_t bte_ret;
-
-	DBUG_ON((u64)src != L1_CACHE_ALIGN((u64)src));
-	DBUG_ON((u64)dst != L1_CACHE_ALIGN((u64)dst));
-	DBUG_ON(cnt != L1_CACHE_ALIGN(cnt));
-
-	if (part->act_state == XPC_P_DEACTIVATING)
-		return part->reason;
-
-	bte_ret = xp_bte_copy((u64)src, (u64)dst, (u64)cnt,
-			      (BTE_NORMAL | BTE_WACQUIRE), NULL);
-	if (bte_ret == BTE_SUCCESS)
-		return xpSuccess;
-
-	dev_dbg(xpc_chan, "xp_bte_copy() from partition %d failed, ret=%d\n",
-		XPC_PARTID(part), bte_ret);
-
-	return xpc_map_bte_errors(bte_ret);
-}
-
-/*
- * Pull the remote per partition specific variables from the specified
- * partition.
- */
-enum xp_retval
-xpc_pull_remote_vars_part(struct xpc_partition *part)
-{
-	u8 buffer[L1_CACHE_BYTES * 2];
-	struct xpc_vars_part *pulled_entry_cacheline =
-	    (struct xpc_vars_part *)L1_CACHE_ALIGN((u64)buffer);
-	struct xpc_vars_part *pulled_entry;
-	u64 remote_entry_cacheline_pa, remote_entry_pa;
-	short partid = XPC_PARTID(part);
-	enum xp_retval ret;
-
-	/* pull the cacheline that contains the variables we're interested in */
-
-	DBUG_ON(part->remote_vars_part_pa !=
-		L1_CACHE_ALIGN(part->remote_vars_part_pa));
-	DBUG_ON(sizeof(struct xpc_vars_part) != L1_CACHE_BYTES / 2);
-
-	remote_entry_pa = part->remote_vars_part_pa +
-	    sn_partition_id * sizeof(struct xpc_vars_part);
-
-	remote_entry_cacheline_pa = (remote_entry_pa & ~(L1_CACHE_BYTES - 1));
-
-	pulled_entry = (struct xpc_vars_part *)((u64)pulled_entry_cacheline +
-						(remote_entry_pa &
-						 (L1_CACHE_BYTES - 1)));
-
-	ret = xpc_pull_remote_cachelines(part, pulled_entry_cacheline,
-					 (void *)remote_entry_cacheline_pa,
-					 L1_CACHE_BYTES);
-	if (ret != xpSuccess) {
-		dev_dbg(xpc_chan, "failed to pull XPC vars_part from "
-			"partition %d, ret=%d\n", partid, ret);
-		return ret;
-	}
-
-	/* see if they've been set up yet */
-
-	if (pulled_entry->magic != XPC_VP_MAGIC1 &&
-	    pulled_entry->magic != XPC_VP_MAGIC2) {
-
-		if (pulled_entry->magic != 0) {
-			dev_dbg(xpc_chan, "partition %d's XPC vars_part for "
-				"partition %d has bad magic value (=0x%lx)\n",
-				partid, sn_partition_id, pulled_entry->magic);
-			return xpBadMagic;
-		}
-
-		/* they've not been initialized yet */
-		return xpRetry;
-	}
-
-	if (xpc_vars_part[partid].magic == XPC_VP_MAGIC1) {
-
-		/* validate the variables */
-
-		if (pulled_entry->GPs_pa == 0 ||
-		    pulled_entry->openclose_args_pa == 0 ||
-		    pulled_entry->IPI_amo_pa == 0) {
-
-			dev_err(xpc_chan, "partition %d's XPC vars_part for "
-				"partition %d are not valid\n", partid,
-				sn_partition_id);
-			return xpInvalidAddress;
-		}
-
-		/* the variables we imported look to be valid */
-
-		part->remote_GPs_pa = pulled_entry->GPs_pa;
-		part->remote_openclose_args_pa =
-		    pulled_entry->openclose_args_pa;
-		part->remote_IPI_amo_va =
-		    (AMO_t *)__va(pulled_entry->IPI_amo_pa);
-		part->remote_IPI_nasid = pulled_entry->IPI_nasid;
-		part->remote_IPI_phys_cpuid = pulled_entry->IPI_phys_cpuid;
-
-		if (part->nchannels > pulled_entry->nchannels)
-			part->nchannels = pulled_entry->nchannels;
-
-		/* let the other side know that we've pulled their variables */
-
-		xpc_vars_part[partid].magic = XPC_VP_MAGIC2;
-	}
-
-	if (pulled_entry->magic == XPC_VP_MAGIC1)
-		return xpRetry;
-
-	return xpSuccess;
-}
-
-/*
- * Get the IPI flags and pull the openclose args and/or remote GPs as needed.
- */
-static u64
-xpc_get_IPI_flags(struct xpc_partition *part)
-{
-	unsigned long irq_flags;
-	u64 IPI_amo;
-	enum xp_retval ret;
-
-	/*
-	 * See if there are any IPI flags to be handled.
-	 */
-
-	spin_lock_irqsave(&part->IPI_lock, irq_flags);
-	IPI_amo = part->local_IPI_amo;
-	if (IPI_amo != 0)
-		part->local_IPI_amo = 0;
-
-	spin_unlock_irqrestore(&part->IPI_lock, irq_flags);
-
-	if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_amo)) {
-		ret = xpc_pull_remote_cachelines(part,
-						 part->remote_openclose_args,
-						 (void *)part->
-						 remote_openclose_args_pa,
-						 XPC_OPENCLOSE_ARGS_SIZE);
-		if (ret != xpSuccess) {
-			XPC_DEACTIVATE_PARTITION(part, ret);
-
-			dev_dbg(xpc_chan, "failed to pull openclose args from "
-				"partition %d, ret=%d\n", XPC_PARTID(part),
-				ret);
-
-			/* don't bother processing IPIs anymore */
-			IPI_amo = 0;
-		}
-	}
-
-	if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_amo)) {
-		ret = xpc_pull_remote_cachelines(part, part->remote_GPs,
-						 (void *)part->remote_GPs_pa,
-						 XPC_GP_SIZE);
-		if (ret != xpSuccess) {
-			XPC_DEACTIVATE_PARTITION(part, ret);
-
-			dev_dbg(xpc_chan, "failed to pull GPs from partition "
-				"%d, ret=%d\n", XPC_PARTID(part), ret);
-
-			/* don't bother processing IPIs anymore */
-			IPI_amo = 0;
-		}
-	}
-
-	return IPI_amo;
-}
-
-/*
- * Allocate the local message queue and the notify queue.
- */
-static enum xp_retval
-xpc_allocate_local_msgqueue(struct xpc_channel *ch)
-{
-	unsigned long irq_flags;
-	int nentries;
-	size_t nbytes;
-
-	for (nentries = ch->local_nentries; nentries > 0; nentries--) {
-
-		nbytes = nentries * ch->msg_size;
-		ch->local_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes,
-								   GFP_KERNEL,
-						      &ch->local_msgqueue_base);
-		if (ch->local_msgqueue == NULL)
-			continue;
-
-		nbytes = nentries * sizeof(struct xpc_notify);
-		ch->notify_queue = kzalloc(nbytes, GFP_KERNEL);
-		if (ch->notify_queue == NULL) {
-			kfree(ch->local_msgqueue_base);
-			ch->local_msgqueue = NULL;
-			continue;
-		}
-
-		spin_lock_irqsave(&ch->lock, irq_flags);
-		if (nentries < ch->local_nentries) {
-			dev_dbg(xpc_chan, "nentries=%d local_nentries=%d, "
-				"partid=%d, channel=%d\n", nentries,
-				ch->local_nentries, ch->partid, ch->number);
-
-			ch->local_nentries = nentries;
-		}
-		spin_unlock_irqrestore(&ch->lock, irq_flags);
-		return xpSuccess;
-	}
-
-	dev_dbg(xpc_chan, "can't get memory for local message queue and notify "
-		"queue, partid=%d, channel=%d\n", ch->partid, ch->number);
-	return xpNoMemory;
-}
-
-/*
- * Allocate the cached remote message queue.
- */
-static enum xp_retval
-xpc_allocate_remote_msgqueue(struct xpc_channel *ch)
-{
-	unsigned long irq_flags;
-	int nentries;
-	size_t nbytes;
-
-	DBUG_ON(ch->remote_nentries <= 0);
-
-	for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
-
-		nbytes = nentries * ch->msg_size;
-		ch->remote_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes,
-								    GFP_KERNEL,
-						     &ch->remote_msgqueue_base);
-		if (ch->remote_msgqueue == NULL)
-			continue;
-
-		spin_lock_irqsave(&ch->lock, irq_flags);
-		if (nentries < ch->remote_nentries) {
-			dev_dbg(xpc_chan, "nentries=%d remote_nentries=%d, "
-				"partid=%d, channel=%d\n", nentries,
-				ch->remote_nentries, ch->partid, ch->number);
-
-			ch->remote_nentries = nentries;
-		}
-		spin_unlock_irqrestore(&ch->lock, irq_flags);
-		return xpSuccess;
-	}
-
-	dev_dbg(xpc_chan, "can't get memory for cached remote message queue, "
-		"partid=%d, channel=%d\n", ch->partid, ch->number);
-	return xpNoMemory;
-}
-
-/*
- * Allocate message queues and other stuff associated with a channel.
- *
- * Note: Assumes all of the channel sizes are filled in.
- */
-static enum xp_retval
-xpc_allocate_msgqueues(struct xpc_channel *ch)
-{
-	unsigned long irq_flags;
-	enum xp_retval ret;
-
-	DBUG_ON(ch->flags & XPC_C_SETUP);
-
-	ret = xpc_allocate_local_msgqueue(ch);
-	if (ret != xpSuccess)
-		return ret;
-
-	ret = xpc_allocate_remote_msgqueue(ch);
-	if (ret != xpSuccess) {
-		kfree(ch->local_msgqueue_base);
-		ch->local_msgqueue = NULL;
-		kfree(ch->notify_queue);
-		ch->notify_queue = NULL;
-		return ret;
-	}
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-	ch->flags |= XPC_C_SETUP;
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-
-	return xpSuccess;
-}
-
-/*
  * Process a connect message from a remote partition.
  *
  * Note: xpc_process_connect() is expecting to be called with the
@@ -565,30 +39,29 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 	if (!(ch->flags & XPC_C_SETUP)) {
 		spin_unlock_irqrestore(&ch->lock, *irq_flags);
-		ret = xpc_allocate_msgqueues(ch);
+		ret = xpc_setup_msg_structures(ch);
 		spin_lock_irqsave(&ch->lock, *irq_flags);
 
 		if (ret != xpSuccess)
 			XPC_DISCONNECT_CHANNEL(ch, ret, irq_flags);
 
+		ch->flags |= XPC_C_SETUP;
+
 		if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
 			return;
 
-		DBUG_ON(!(ch->flags & XPC_C_SETUP));
 		DBUG_ON(ch->local_msgqueue == NULL);
 		DBUG_ON(ch->remote_msgqueue == NULL);
 	}
 
 	if (!(ch->flags & XPC_C_OPENREPLY)) {
 		ch->flags |= XPC_C_OPENREPLY;
-		xpc_IPI_send_openreply(ch, irq_flags);
+		xpc_send_chctl_openreply(ch, irq_flags);
 	}
 
 	if (!(ch->flags & XPC_C_ROPENREPLY))
 		return;
 
-	DBUG_ON(ch->remote_msgqueue_pa == 0);
-
 	ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP);	/* clear all else */
 
 	dev_info(xpc_chan, "channel %d to partition %d connected\n",
@@ -600,99 +73,6 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
 }
 
 /*
- * Notify those who wanted to be notified upon delivery of their message.
- */
-static void
-xpc_notify_senders(struct xpc_channel *ch, enum xp_retval reason, s64 put)
-{
-	struct xpc_notify *notify;
-	u8 notify_type;
-	s64 get = ch->w_remote_GP.get - 1;
-
-	while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
-
-		notify = &ch->notify_queue[get % ch->local_nentries];
-
-		/*
-		 * See if the notify entry indicates it was associated with
-		 * a message who's sender wants to be notified. It is possible
-		 * that it is, but someone else is doing or has done the
-		 * notification.
-		 */
-		notify_type = notify->type;
-		if (notify_type == 0 ||
-		    cmpxchg(&notify->type, notify_type, 0) != notify_type) {
-			continue;
-		}
-
-		DBUG_ON(notify_type != XPC_N_CALL);
-
-		atomic_dec(&ch->n_to_notify);
-
-		if (notify->func != NULL) {
-			dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, "
-				"msg_number=%ld, partid=%d, channel=%d\n",
-				(void *)notify, get, ch->partid, ch->number);
-
-			notify->func(reason, ch->partid, ch->number,
-				     notify->key);
-
-			dev_dbg(xpc_chan, "notify->func() returned, "
-				"notify=0x%p, msg_number=%ld, partid=%d, "
-				"channel=%d\n", (void *)notify, get,
-				ch->partid, ch->number);
-		}
-	}
-}
-
-/*
- * Free up message queues and other stuff that were allocated for the specified
- * channel.
- *
- * Note: ch->reason and ch->reason_line are left set for debugging purposes,
- * they're cleared when XPC_C_DISCONNECTED is cleared.
- */
-static void
-xpc_free_msgqueues(struct xpc_channel *ch)
-{
-	DBUG_ON(!spin_is_locked(&ch->lock));
-	DBUG_ON(atomic_read(&ch->n_to_notify) != 0);
-
-	ch->remote_msgqueue_pa = 0;
-	ch->func = NULL;
-	ch->key = NULL;
-	ch->msg_size = 0;
-	ch->local_nentries = 0;
-	ch->remote_nentries = 0;
-	ch->kthreads_assigned_limit = 0;
-	ch->kthreads_idle_limit = 0;
-
-	ch->local_GP->get = 0;
-	ch->local_GP->put = 0;
-	ch->remote_GP.get = 0;
-	ch->remote_GP.put = 0;
-	ch->w_local_GP.get = 0;
-	ch->w_local_GP.put = 0;
-	ch->w_remote_GP.get = 0;
-	ch->w_remote_GP.put = 0;
-	ch->next_msg_to_pull = 0;
-
-	if (ch->flags & XPC_C_SETUP) {
-		ch->flags &= ~XPC_C_SETUP;
-
-		dev_dbg(xpc_chan, "ch->flags=0x%x, partid=%d, channel=%d\n",
-			ch->flags, ch->partid, ch->number);
-
-		kfree(ch->local_msgqueue_base);
-		ch->local_msgqueue = NULL;
-		kfree(ch->remote_msgqueue_base);
-		ch->remote_msgqueue = NULL;
-		kfree(ch->notify_queue);
-		ch->notify_queue = NULL;
-	}
-}
-
-/*
  * spin_lock_irqsave() is expected to be held on entry.
  */
 static void
@@ -717,9 +97,9 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 	DBUG_ON((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
 		!(ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE));
 
-	if (part->act_state == XPC_P_DEACTIVATING) {
+	if (part->act_state == XPC_P_AS_DEACTIVATING) {
 		/* can't proceed until the other side disengages from us */
-		if (xpc_partition_engaged(1UL << ch->partid))
+		if (xpc_partition_engaged(ch->partid))
 			return;
 
 	} else {
@@ -731,7 +111,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 		if (!(ch->flags & XPC_C_CLOSEREPLY)) {
 			ch->flags |= XPC_C_CLOSEREPLY;
-			xpc_IPI_send_closereply(ch, irq_flags);
+			xpc_send_chctl_closereply(ch, irq_flags);
 		}
 
 		if (!(ch->flags & XPC_C_RCLOSEREPLY))
@@ -740,8 +120,8 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 
 	/* wake those waiting for notify completion */
 	if (atomic_read(&ch->n_to_notify) > 0) {
-		/* >>> we do callout while holding ch->lock */
-		xpc_notify_senders(ch, ch->reason, ch->w_local_GP.put);
+		/* we do callout while holding ch->lock, callout can't block */
+		xpc_notify_senders_of_disconnect(ch);
 	}
 
 	/* both sides are disconnected now */
@@ -752,10 +132,24 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 		spin_lock_irqsave(&ch->lock, *irq_flags);
 	}
 
+	DBUG_ON(atomic_read(&ch->n_to_notify) != 0);
+
 	/* it's now safe to free the channel's message queues */
-	xpc_free_msgqueues(ch);
+	xpc_teardown_msg_structures(ch);
 
-	/* mark disconnected, clear all other flags except XPC_C_WDISCONNECT */
+	ch->func = NULL;
+	ch->key = NULL;
+	ch->entry_size = 0;
+	ch->local_nentries = 0;
+	ch->remote_nentries = 0;
+	ch->kthreads_assigned_limit = 0;
+	ch->kthreads_idle_limit = 0;
+
+	/*
+	 * Mark the channel disconnected and clear all other flags, including
+	 * XPC_C_SETUP (because of call to xpc_teardown_msg_structures()) but
+	 * not including XPC_C_WDISCONNECT (if it was set).
+	 */
 	ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT));
 
 	atomic_dec(&part->nchannels_active);
@@ -768,15 +162,15 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
 	if (ch->flags & XPC_C_WDISCONNECT) {
 		/* we won't lose the CPU since we're holding ch->lock */
 		complete(&ch->wdisconnect_wait);
-	} else if (ch->delayed_IPI_flags) {
-		if (part->act_state != XPC_P_DEACTIVATING) {
-			/* time to take action on any delayed IPI flags */
-			spin_lock(&part->IPI_lock);
-			XPC_SET_IPI_FLAGS(part->local_IPI_amo, ch->number,
-					  ch->delayed_IPI_flags);
-			spin_unlock(&part->IPI_lock);
+	} else if (ch->delayed_chctl_flags) {
+		if (part->act_state != XPC_P_AS_DEACTIVATING) {
+			/* time to take action on any delayed chctl flags */
+			spin_lock(&part->chctl_lock);
+			part->chctl.flags[ch->number] |=
+			    ch->delayed_chctl_flags;
+			spin_unlock(&part->chctl_lock);
 		}
-		ch->delayed_IPI_flags = 0;
+		ch->delayed_chctl_flags = 0;
 	}
 }
 
@@ -784,8 +178,8 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags)
  * Process a change in the channel's remote connection state.
  */
 static void
-xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number,
-			  u8 IPI_flags)
+xpc_process_openclose_chctl_flags(struct xpc_partition *part, int ch_number,
+				  u8 chctl_flags)
 {
 	unsigned long irq_flags;
 	struct xpc_openclose_args *args =
@@ -800,24 +194,24 @@ again:
 	if ((ch->flags & XPC_C_DISCONNECTED) &&
 	    (ch->flags & XPC_C_WDISCONNECT)) {
 		/*
-		 * Delay processing IPI flags until thread waiting disconnect
+		 * Delay processing chctl flags until thread waiting disconnect
 		 * has had a chance to see that the channel is disconnected.
 		 */
-		ch->delayed_IPI_flags |= IPI_flags;
+		ch->delayed_chctl_flags |= chctl_flags;
 		spin_unlock_irqrestore(&ch->lock, irq_flags);
 		return;
 	}
 
-	if (IPI_flags & XPC_IPI_CLOSEREQUEST) {
+	if (chctl_flags & XPC_CHCTL_CLOSEREQUEST) {
 
-		dev_dbg(xpc_chan, "XPC_IPI_CLOSEREQUEST (reason=%d) received "
+		dev_dbg(xpc_chan, "XPC_CHCTL_CLOSEREQUEST (reason=%d) received "
 			"from partid=%d, channel=%d\n", args->reason,
 			ch->partid, ch->number);
 
 		/*
 		 * If RCLOSEREQUEST is set, we're probably waiting for
 		 * RCLOSEREPLY. We should find it and a ROPENREQUEST packed
-		 * with this RCLOSEREQUEST in the IPI_flags.
+		 * with this RCLOSEREQUEST in the chctl_flags.
 		 */
 
 		if (ch->flags & XPC_C_RCLOSEREQUEST) {
@@ -826,8 +220,8 @@ again:
 			DBUG_ON(!(ch->flags & XPC_C_CLOSEREPLY));
 			DBUG_ON(ch->flags & XPC_C_RCLOSEREPLY);
 
-			DBUG_ON(!(IPI_flags & XPC_IPI_CLOSEREPLY));
-			IPI_flags &= ~XPC_IPI_CLOSEREPLY;
+			DBUG_ON(!(chctl_flags & XPC_CHCTL_CLOSEREPLY));
+			chctl_flags &= ~XPC_CHCTL_CLOSEREPLY;
 			ch->flags |= XPC_C_RCLOSEREPLY;
 
 			/* both sides have finished disconnecting */
@@ -837,17 +231,15 @@ again:
 		}
 
 		if (ch->flags & XPC_C_DISCONNECTED) {
-			if (!(IPI_flags & XPC_IPI_OPENREQUEST)) {
-				if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo,
-						       ch_number) &
-				     XPC_IPI_OPENREQUEST)) {
-
-					DBUG_ON(ch->delayed_IPI_flags != 0);
-					spin_lock(&part->IPI_lock);
-					XPC_SET_IPI_FLAGS(part->local_IPI_amo,
-							  ch_number,
-							  XPC_IPI_CLOSEREQUEST);
-					spin_unlock(&part->IPI_lock);
+			if (!(chctl_flags & XPC_CHCTL_OPENREQUEST)) {
+				if (part->chctl.flags[ch_number] &
+				    XPC_CHCTL_OPENREQUEST) {
+
+					DBUG_ON(ch->delayed_chctl_flags != 0);
+					spin_lock(&part->chctl_lock);
+					part->chctl.flags[ch_number] |=
+					    XPC_CHCTL_CLOSEREQUEST;
+					spin_unlock(&part->chctl_lock);
 				}
 				spin_unlock_irqrestore(&ch->lock, irq_flags);
 				return;
@@ -860,7 +252,7 @@ again:
 			ch->flags |= (XPC_C_CONNECTING | XPC_C_ROPENREQUEST);
 		}
 
-		IPI_flags &= ~(XPC_IPI_OPENREQUEST | XPC_IPI_OPENREPLY);
+		chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY);
 
 		/*
 		 * The meaningful CLOSEREQUEST connection state fields are:
@@ -878,7 +270,7 @@ again:
 
 			XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
 
-			DBUG_ON(IPI_flags & XPC_IPI_CLOSEREPLY);
+			DBUG_ON(chctl_flags & XPC_CHCTL_CLOSEREPLY);
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
 		}
@@ -886,13 +278,13 @@ again:
 		xpc_process_disconnect(ch, &irq_flags);
 	}
 
-	if (IPI_flags & XPC_IPI_CLOSEREPLY) {
+	if (chctl_flags & XPC_CHCTL_CLOSEREPLY) {
 
-		dev_dbg(xpc_chan, "XPC_IPI_CLOSEREPLY received from partid=%d,"
-			" channel=%d\n", ch->partid, ch->number);
+		dev_dbg(xpc_chan, "XPC_CHCTL_CLOSEREPLY received from partid="
+			"%d, channel=%d\n", ch->partid, ch->number);
 
 		if (ch->flags & XPC_C_DISCONNECTED) {
-			DBUG_ON(part->act_state != XPC_P_DEACTIVATING);
+			DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING);
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
 		}
@@ -900,15 +292,14 @@ again:
 		DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST));
 
 		if (!(ch->flags & XPC_C_RCLOSEREQUEST)) {
-			if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, ch_number)
-			     & XPC_IPI_CLOSEREQUEST)) {
-
-				DBUG_ON(ch->delayed_IPI_flags != 0);
-				spin_lock(&part->IPI_lock);
-				XPC_SET_IPI_FLAGS(part->local_IPI_amo,
-						  ch_number,
-						  XPC_IPI_CLOSEREPLY);
-				spin_unlock(&part->IPI_lock);
+			if (part->chctl.flags[ch_number] &
+			    XPC_CHCTL_CLOSEREQUEST) {
+
+				DBUG_ON(ch->delayed_chctl_flags != 0);
+				spin_lock(&part->chctl_lock);
+				part->chctl.flags[ch_number] |=
+				    XPC_CHCTL_CLOSEREPLY;
+				spin_unlock(&part->chctl_lock);
 			}
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
@@ -922,21 +313,21 @@ again:
 		}
 	}
 
-	if (IPI_flags & XPC_IPI_OPENREQUEST) {
+	if (chctl_flags & XPC_CHCTL_OPENREQUEST) {
 
-		dev_dbg(xpc_chan, "XPC_IPI_OPENREQUEST (msg_size=%d, "
+		dev_dbg(xpc_chan, "XPC_CHCTL_OPENREQUEST (entry_size=%d, "
 			"local_nentries=%d) received from partid=%d, "
-			"channel=%d\n", args->msg_size, args->local_nentries,
+			"channel=%d\n", args->entry_size, args->local_nentries,
 			ch->partid, ch->number);
 
-		if (part->act_state == XPC_P_DEACTIVATING ||
+		if (part->act_state == XPC_P_AS_DEACTIVATING ||
 		    (ch->flags & XPC_C_ROPENREQUEST)) {
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
 		}
 
 		if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) {
-			ch->delayed_IPI_flags |= XPC_IPI_OPENREQUEST;
+			ch->delayed_chctl_flags |= XPC_CHCTL_OPENREQUEST;
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
 		}
@@ -947,10 +338,10 @@ again:
 
 		/*
 		 * The meaningful OPENREQUEST connection state fields are:
-		 *      msg_size = size of channel's messages in bytes
+		 *      entry_size = size of channel's messages in bytes
 		 *      local_nentries = remote partition's local_nentries
 		 */
-		if (args->msg_size == 0 || args->local_nentries == 0) {
+		if (args->entry_size == 0 || args->local_nentries == 0) {
 			/* assume OPENREQUEST was delayed by mistake */
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
 			return;
@@ -960,14 +351,14 @@ again:
 		ch->remote_nentries = args->local_nentries;
 
 		if (ch->flags & XPC_C_OPENREQUEST) {
-			if (args->msg_size != ch->msg_size) {
+			if (args->entry_size != ch->entry_size) {
 				XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes,
 						       &irq_flags);
 				spin_unlock_irqrestore(&ch->lock, irq_flags);
 				return;
 			}
 		} else {
-			ch->msg_size = args->msg_size;
+			ch->entry_size = args->entry_size;
 
 			XPC_SET_REASON(ch, 0, 0);
 			ch->flags &= ~XPC_C_DISCONNECTED;
@@ -978,13 +369,13 @@ again:
 		xpc_process_connect(ch, &irq_flags);
 	}
 
-	if (IPI_flags & XPC_IPI_OPENREPLY) {
+	if (chctl_flags & XPC_CHCTL_OPENREPLY) {
 
-		dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY (local_msgqueue_pa=0x%lx, "
-			"local_nentries=%d, remote_nentries=%d) received from "
-			"partid=%d, channel=%d\n", args->local_msgqueue_pa,
-			args->local_nentries, args->remote_nentries,
-			ch->partid, ch->number);
+		dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY (local_msgqueue_pa="
+			"0x%lx, local_nentries=%d, remote_nentries=%d) "
+			"received from partid=%d, channel=%d\n",
+			args->local_msgqueue_pa, args->local_nentries,
+			args->remote_nentries, ch->partid, ch->number);
 
 		if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) {
 			spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -1012,10 +403,10 @@ again:
 		DBUG_ON(args->remote_nentries == 0);
 
 		ch->flags |= XPC_C_ROPENREPLY;
-		ch->remote_msgqueue_pa = args->local_msgqueue_pa;
+		xpc_save_remote_msgqueue_pa(ch, args->local_msgqueue_pa);
 
 		if (args->local_nentries < ch->remote_nentries) {
-			dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY: new "
+			dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY: new "
 				"remote_nentries=%d, old remote_nentries=%d, "
 				"partid=%d, channel=%d\n",
 				args->local_nentries, ch->remote_nentries,
@@ -1024,7 +415,7 @@ again:
 			ch->remote_nentries = args->local_nentries;
 		}
 		if (args->remote_nentries < ch->local_nentries) {
-			dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY: new "
+			dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY: new "
 				"local_nentries=%d, old local_nentries=%d, "
 				"partid=%d, channel=%d\n",
 				args->remote_nentries, ch->local_nentries,
@@ -1082,7 +473,7 @@ xpc_connect_channel(struct xpc_channel *ch)
 	ch->local_nentries = registration->nentries;
 
 	if (ch->flags & XPC_C_ROPENREQUEST) {
-		if (registration->msg_size != ch->msg_size) {
+		if (registration->entry_size != ch->entry_size) {
 			/* the local and remote sides aren't the same */
 
 			/*
@@ -1101,7 +492,7 @@ xpc_connect_channel(struct xpc_channel *ch)
 			return xpUnequalMsgSizes;
 		}
 	} else {
-		ch->msg_size = registration->msg_size;
+		ch->entry_size = registration->entry_size;
 
 		XPC_SET_REASON(ch, 0, 0);
 		ch->flags &= ~XPC_C_DISCONNECTED;
@@ -1114,7 +505,7 @@ xpc_connect_channel(struct xpc_channel *ch)
 	/* initiate the connection */
 
 	ch->flags |= (XPC_C_OPENREQUEST | XPC_C_CONNECTING);
-	xpc_IPI_send_openrequest(ch, &irq_flags);
+	xpc_send_chctl_openrequest(ch, &irq_flags);
 
 	xpc_process_connect(ch, &irq_flags);
 
@@ -1123,152 +514,16 @@ xpc_connect_channel(struct xpc_channel *ch)
 	return xpSuccess;
 }
 
-/*
- * Clear some of the msg flags in the local message queue.
- */
-static inline void
-xpc_clear_local_msgqueue_flags(struct xpc_channel *ch)
-{
-	struct xpc_msg *msg;
-	s64 get;
-
-	get = ch->w_remote_GP.get;
-	do {
-		msg = (struct xpc_msg *)((u64)ch->local_msgqueue +
-					 (get % ch->local_nentries) *
-					 ch->msg_size);
-		msg->flags = 0;
-	} while (++get < ch->remote_GP.get);
-}
-
-/*
- * Clear some of the msg flags in the remote message queue.
- */
-static inline void
-xpc_clear_remote_msgqueue_flags(struct xpc_channel *ch)
-{
-	struct xpc_msg *msg;
-	s64 put;
-
-	put = ch->w_remote_GP.put;
-	do {
-		msg = (struct xpc_msg *)((u64)ch->remote_msgqueue +
-					 (put % ch->remote_nentries) *
-					 ch->msg_size);
-		msg->flags = 0;
-	} while (++put < ch->remote_GP.put);
-}
-
-static void
-xpc_process_msg_IPI(struct xpc_partition *part, int ch_number)
-{
-	struct xpc_channel *ch = &part->channels[ch_number];
-	int nmsgs_sent;
-
-	ch->remote_GP = part->remote_GPs[ch_number];
-
-	/* See what, if anything, has changed for each connected channel */
-
-	xpc_msgqueue_ref(ch);
-
-	if (ch->w_remote_GP.get == ch->remote_GP.get &&
-	    ch->w_remote_GP.put == ch->remote_GP.put) {
-		/* nothing changed since GPs were last pulled */
-		xpc_msgqueue_deref(ch);
-		return;
-	}
-
-	if (!(ch->flags & XPC_C_CONNECTED)) {
-		xpc_msgqueue_deref(ch);
-		return;
-	}
-
-	/*
-	 * First check to see if messages recently sent by us have been
-	 * received by the other side. (The remote GET value will have
-	 * changed since we last looked at it.)
-	 */
-
-	if (ch->w_remote_GP.get != ch->remote_GP.get) {
-
-		/*
-		 * We need to notify any senders that want to be notified
-		 * that their sent messages have been received by their
-		 * intended recipients. We need to do this before updating
-		 * w_remote_GP.get so that we don't allocate the same message
-		 * queue entries prematurely (see xpc_allocate_msg()).
-		 */
-		if (atomic_read(&ch->n_to_notify) > 0) {
-			/*
-			 * Notify senders that messages sent have been
-			 * received and delivered by the other side.
-			 */
-			xpc_notify_senders(ch, xpMsgDelivered,
-					   ch->remote_GP.get);
-		}
-
-		/*
-		 * Clear msg->flags in previously sent messages, so that
-		 * they're ready for xpc_allocate_msg().
-		 */
-		xpc_clear_local_msgqueue_flags(ch);
-
-		ch->w_remote_GP.get = ch->remote_GP.get;
-
-		dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, "
-			"channel=%d\n", ch->w_remote_GP.get, ch->partid,
-			ch->number);
-
-		/*
-		 * If anyone was waiting for message queue entries to become
-		 * available, wake them up.
-		 */
-		if (atomic_read(&ch->n_on_msg_allocate_wq) > 0)
-			wake_up(&ch->msg_allocate_wq);
-	}
-
-	/*
-	 * Now check for newly sent messages by the other side. (The remote
-	 * PUT value will have changed since we last looked at it.)
-	 */
-
-	if (ch->w_remote_GP.put != ch->remote_GP.put) {
-		/*
-		 * Clear msg->flags in previously received messages, so that
-		 * they're ready for xpc_get_deliverable_msg().
-		 */
-		xpc_clear_remote_msgqueue_flags(ch);
-
-		ch->w_remote_GP.put = ch->remote_GP.put;
-
-		dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
-			"channel=%d\n", ch->w_remote_GP.put, ch->partid,
-			ch->number);
-
-		nmsgs_sent = ch->w_remote_GP.put - ch->w_local_GP.get;
-		if (nmsgs_sent > 0) {
-			dev_dbg(xpc_chan, "msgs waiting to be copied and "
-				"delivered=%d, partid=%d, channel=%d\n",
-				nmsgs_sent, ch->partid, ch->number);
-
-			if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)
-				xpc_activate_kthreads(ch, nmsgs_sent);
-		}
-	}
-
-	xpc_msgqueue_deref(ch);
-}
-
 void
-xpc_process_channel_activity(struct xpc_partition *part)
+xpc_process_sent_chctl_flags(struct xpc_partition *part)
 {
 	unsigned long irq_flags;
-	u64 IPI_amo, IPI_flags;
+	union xpc_channel_ctl_flags chctl;
 	struct xpc_channel *ch;
 	int ch_number;
 	u32 ch_flags;
 
-	IPI_amo = xpc_get_IPI_flags(part);
+	chctl.all_flags = xpc_get_chctl_all_flags(part);
 
 	/*
 	 * Initiate channel connections for registered channels.
@@ -1281,14 +536,14 @@ xpc_process_channel_activity(struct xpc_partition *part)
 		ch = &part->channels[ch_number];
 
 		/*
-		 * Process any open or close related IPI flags, and then deal
+		 * Process any open or close related chctl flags, and then deal
 		 * with connecting or disconnecting the channel as required.
 		 */
 
-		IPI_flags = XPC_GET_IPI_FLAGS(IPI_amo, ch_number);
-
-		if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_flags))
-			xpc_process_openclose_IPI(part, ch_number, IPI_flags);
+		if (chctl.flags[ch_number] & XPC_OPENCLOSE_CHCTL_FLAGS) {
+			xpc_process_openclose_chctl_flags(part, ch_number,
+							chctl.flags[ch_number]);
+		}
 
 		ch_flags = ch->flags;	/* need an atomic snapshot of flags */
 
@@ -1299,7 +554,7 @@ xpc_process_channel_activity(struct xpc_partition *part)
 			continue;
 		}
 
-		if (part->act_state == XPC_P_DEACTIVATING)
+		if (part->act_state == XPC_P_AS_DEACTIVATING)
 			continue;
 
 		if (!(ch_flags & XPC_C_CONNECTED)) {
@@ -1315,13 +570,13 @@ xpc_process_channel_activity(struct xpc_partition *part)
 		}
 
 		/*
-		 * Process any message related IPI flags, this may involve the
-		 * activation of kthreads to deliver any pending messages sent
-		 * from the other partition.
+		 * Process any message related chctl flags, this may involve
+		 * the activation of kthreads to deliver any pending messages
+		 * sent from the other partition.
 		 */
 
-		if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_flags))
-			xpc_process_msg_IPI(part, ch_number);
+		if (chctl.flags[ch_number] & XPC_MSG_CHCTL_FLAGS)
+			xpc_process_msg_chctl_flags(part, ch_number);
 	}
 }
 
@@ -1369,59 +624,6 @@ xpc_partition_going_down(struct xpc_partition *part, enum xp_retval reason)
 }
 
 /*
- * Teardown the infrastructure necessary to support XPartition Communication
- * between the specified remote partition and the local one.
- */
-void
-xpc_teardown_infrastructure(struct xpc_partition *part)
-{
-	short partid = XPC_PARTID(part);
-
-	/*
-	 * We start off by making this partition inaccessible to local
-	 * processes by marking it as no longer setup. Then we make it
-	 * inaccessible to remote processes by clearing the XPC per partition
-	 * specific variable's magic # (which indicates that these variables
-	 * are no longer valid) and by ignoring all XPC notify IPIs sent to
-	 * this partition.
-	 */
-
-	DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
-	DBUG_ON(atomic_read(&part->nchannels_active) != 0);
-	DBUG_ON(part->setup_state != XPC_P_SETUP);
-	part->setup_state = XPC_P_WTEARDOWN;
-
-	xpc_vars_part[partid].magic = 0;
-
-	free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid);
-
-	/*
-	 * Before proceeding with the teardown we have to wait until all
-	 * existing references cease.
-	 */
-	wait_event(part->teardown_wq, (atomic_read(&part->references) == 0));
-
-	/* now we can begin tearing down the infrastructure */
-
-	part->setup_state = XPC_P_TORNDOWN;
-
-	/* in case we've still got outstanding timers registered... */
-	del_timer_sync(&part->dropped_IPI_timer);
-
-	kfree(part->remote_openclose_args_base);
-	part->remote_openclose_args = NULL;
-	kfree(part->local_openclose_args_base);
-	part->local_openclose_args = NULL;
-	kfree(part->remote_GPs_base);
-	part->remote_GPs = NULL;
-	kfree(part->local_GPs_base);
-	part->local_GPs = NULL;
-	kfree(part->channels);
-	part->channels = NULL;
-	part->local_IPI_amo_va = NULL;
-}
-
-/*
  * Called by XP at the time of channel connection registration to cause
  * XPC to establish connections to all currently active partitions.
  */
@@ -1432,9 +634,9 @@ xpc_initiate_connect(int ch_number)
 	struct xpc_partition *part;
 	struct xpc_channel *ch;
 
-	DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+	DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
 
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
 		part = &xpc_partitions[partid];
 
 		if (xpc_part_ref(part)) {
@@ -1488,10 +690,10 @@ xpc_initiate_disconnect(int ch_number)
 	struct xpc_partition *part;
 	struct xpc_channel *ch;
 
-	DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS);
+	DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS);
 
 	/* initiate the channel disconnect for every active partition */
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
 		part = &xpc_partitions[partid];
 
 		if (xpc_part_ref(part)) {
@@ -1550,7 +752,7 @@ xpc_disconnect_channel(const int line, struct xpc_channel *ch,
 		       XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY |
 		       XPC_C_CONNECTING | XPC_C_CONNECTED);
 
-	xpc_IPI_send_closerequest(ch, irq_flags);
+	xpc_send_chctl_closerequest(ch, irq_flags);
 
 	if (channel_was_connected)
 		ch->flags |= XPC_C_WASCONNECTED;
@@ -1598,7 +800,7 @@ xpc_disconnect_callout(struct xpc_channel *ch, enum xp_retval reason)
  * Wait for a message entry to become available for the specified channel,
  * but don't wait any longer than 1 jiffy.
  */
-static enum xp_retval
+enum xp_retval
 xpc_allocate_msg_wait(struct xpc_channel *ch)
 {
 	enum xp_retval ret;
@@ -1625,315 +827,54 @@ xpc_allocate_msg_wait(struct xpc_channel *ch)
 }
 
 /*
- * Allocate an entry for a message from the message queue associated with the
- * specified channel.
- */
-static enum xp_retval
-xpc_allocate_msg(struct xpc_channel *ch, u32 flags,
-		 struct xpc_msg **address_of_msg)
-{
-	struct xpc_msg *msg;
-	enum xp_retval ret;
-	s64 put;
-
-	/* this reference will be dropped in xpc_send_msg() */
-	xpc_msgqueue_ref(ch);
-
-	if (ch->flags & XPC_C_DISCONNECTING) {
-		xpc_msgqueue_deref(ch);
-		return ch->reason;
-	}
-	if (!(ch->flags & XPC_C_CONNECTED)) {
-		xpc_msgqueue_deref(ch);
-		return xpNotConnected;
-	}
-
-	/*
-	 * Get the next available message entry from the local message queue.
-	 * If none are available, we'll make sure that we grab the latest
-	 * GP values.
-	 */
-	ret = xpTimeout;
-
-	while (1) {
-
-		put = ch->w_local_GP.put;
-		rmb();	/* guarantee that .put loads before .get */
-		if (put - ch->w_remote_GP.get < ch->local_nentries) {
-
-			/* There are available message entries. We need to try
-			 * to secure one for ourselves. We'll do this by trying
-			 * to increment w_local_GP.put as long as someone else
-			 * doesn't beat us to it. If they do, we'll have to
-			 * try again.
-			 */
-			if (cmpxchg(&ch->w_local_GP.put, put, put + 1) == put) {
-				/* we got the entry referenced by put */
-				break;
-			}
-			continue;	/* try again */
-		}
-
-		/*
-		 * There aren't any available msg entries at this time.
-		 *
-		 * In waiting for a message entry to become available,
-		 * we set a timeout in case the other side is not
-		 * sending completion IPIs. This lets us fake an IPI
-		 * that will cause the IPI handler to fetch the latest
-		 * GP values as if an IPI was sent by the other side.
-		 */
-		if (ret == xpTimeout)
-			xpc_IPI_send_local_msgrequest(ch);
-
-		if (flags & XPC_NOWAIT) {
-			xpc_msgqueue_deref(ch);
-			return xpNoWait;
-		}
-
-		ret = xpc_allocate_msg_wait(ch);
-		if (ret != xpInterrupted && ret != xpTimeout) {
-			xpc_msgqueue_deref(ch);
-			return ret;
-		}
-	}
-
-	/* get the message's address and initialize it */
-	msg = (struct xpc_msg *)((u64)ch->local_msgqueue +
-				 (put % ch->local_nentries) * ch->msg_size);
-
-	DBUG_ON(msg->flags != 0);
-	msg->number = put;
-
-	dev_dbg(xpc_chan, "w_local_GP.put changed to %ld; msg=0x%p, "
-		"msg_number=%ld, partid=%d, channel=%d\n", put + 1,
-		(void *)msg, msg->number, ch->partid, ch->number);
-
-	*address_of_msg = msg;
-
-	return xpSuccess;
-}
-
-/*
- * Allocate an entry for a message from the message queue associated with the
- * specified channel. NOTE that this routine can sleep waiting for a message
- * entry to become available. To not sleep, pass in the XPC_NOWAIT flag.
+ * Send a message that contains the user's payload on the specified channel
+ * connected to the specified partition.
  *
- * Arguments:
+ * NOTE that this routine can sleep waiting for a message entry to become
+ * available. To not sleep, pass in the XPC_NOWAIT flag.
  *
- *	partid - ID of partition to which the channel is connected.
- *	ch_number - channel #.
- *	flags - see xpc.h for valid flags.
- *	payload - address of the allocated payload area pointer (filled in on
- * 	          return) in which the user-defined message is constructed.
- */
-enum xp_retval
-xpc_initiate_allocate(short partid, int ch_number, u32 flags, void **payload)
-{
-	struct xpc_partition *part = &xpc_partitions[partid];
-	enum xp_retval ret = xpUnknownReason;
-	struct xpc_msg *msg = NULL;
-
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
-	DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
-
-	*payload = NULL;
-
-	if (xpc_part_ref(part)) {
-		ret = xpc_allocate_msg(&part->channels[ch_number], flags, &msg);
-		xpc_part_deref(part);
-
-		if (msg != NULL)
-			*payload = &msg->payload;
-	}
-
-	return ret;
-}
-
-/*
- * Now we actually send the messages that are ready to be sent by advancing
- * the local message queue's Put value and then send an IPI to the recipient
- * partition.
- */
-static void
-xpc_send_msgs(struct xpc_channel *ch, s64 initial_put)
-{
-	struct xpc_msg *msg;
-	s64 put = initial_put + 1;
-	int send_IPI = 0;
-
-	while (1) {
-
-		while (1) {
-			if (put == ch->w_local_GP.put)
-				break;
-
-			msg = (struct xpc_msg *)((u64)ch->local_msgqueue +
-						 (put % ch->local_nentries) *
-						 ch->msg_size);
-
-			if (!(msg->flags & XPC_M_READY))
-				break;
-
-			put++;
-		}
-
-		if (put == initial_put) {
-			/* nothing's changed */
-			break;
-		}
-
-		if (cmpxchg_rel(&ch->local_GP->put, initial_put, put) !=
-		    initial_put) {
-			/* someone else beat us to it */
-			DBUG_ON(ch->local_GP->put < initial_put);
-			break;
-		}
-
-		/* we just set the new value of local_GP->put */
-
-		dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, "
-			"channel=%d\n", put, ch->partid, ch->number);
-
-		send_IPI = 1;
-
-		/*
-		 * We need to ensure that the message referenced by
-		 * local_GP->put is not XPC_M_READY or that local_GP->put
-		 * equals w_local_GP.put, so we'll go have a look.
-		 */
-		initial_put = put;
-	}
-
-	if (send_IPI)
-		xpc_IPI_send_msgrequest(ch);
-}
-
-/*
- * Common code that does the actual sending of the message by advancing the
- * local message queue's Put value and sends an IPI to the partition the
- * message is being sent to.
- */
-static enum xp_retval
-xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type,
-	     xpc_notify_func func, void *key)
-{
-	enum xp_retval ret = xpSuccess;
-	struct xpc_notify *notify = notify;
-	s64 put, msg_number = msg->number;
-
-	DBUG_ON(notify_type == XPC_N_CALL && func == NULL);
-	DBUG_ON((((u64)msg - (u64)ch->local_msgqueue) / ch->msg_size) !=
-		msg_number % ch->local_nentries);
-	DBUG_ON(msg->flags & XPC_M_READY);
-
-	if (ch->flags & XPC_C_DISCONNECTING) {
-		/* drop the reference grabbed in xpc_allocate_msg() */
-		xpc_msgqueue_deref(ch);
-		return ch->reason;
-	}
-
-	if (notify_type != 0) {
-		/*
-		 * Tell the remote side to send an ACK interrupt when the
-		 * message has been delivered.
-		 */
-		msg->flags |= XPC_M_INTERRUPT;
-
-		atomic_inc(&ch->n_to_notify);
-
-		notify = &ch->notify_queue[msg_number % ch->local_nentries];
-		notify->func = func;
-		notify->key = key;
-		notify->type = notify_type;
-
-		/* >>> is a mb() needed here? */
-
-		if (ch->flags & XPC_C_DISCONNECTING) {
-			/*
-			 * An error occurred between our last error check and
-			 * this one. We will try to clear the type field from
-			 * the notify entry. If we succeed then
-			 * xpc_disconnect_channel() didn't already process
-			 * the notify entry.
-			 */
-			if (cmpxchg(&notify->type, notify_type, 0) ==
-			    notify_type) {
-				atomic_dec(&ch->n_to_notify);
-				ret = ch->reason;
-			}
-
-			/* drop the reference grabbed in xpc_allocate_msg() */
-			xpc_msgqueue_deref(ch);
-			return ret;
-		}
-	}
-
-	msg->flags |= XPC_M_READY;
-
-	/*
-	 * The preceding store of msg->flags must occur before the following
-	 * load of ch->local_GP->put.
-	 */
-	mb();
-
-	/* see if the message is next in line to be sent, if so send it */
-
-	put = ch->local_GP->put;
-	if (put == msg_number)
-		xpc_send_msgs(ch, put);
-
-	/* drop the reference grabbed in xpc_allocate_msg() */
-	xpc_msgqueue_deref(ch);
-	return ret;
-}
-
-/*
- * Send a message previously allocated using xpc_initiate_allocate() on the
- * specified channel connected to the specified partition.
- *
- * This routine will not wait for the message to be received, nor will
- * notification be given when it does happen. Once this routine has returned
- * the message entry allocated via xpc_initiate_allocate() is no longer
- * accessable to the caller.
- *
- * This routine, although called by users, does not call xpc_part_ref() to
- * ensure that the partition infrastructure is in place. It relies on the
- * fact that we called xpc_msgqueue_ref() in xpc_allocate_msg().
+ * Once sent, this routine will not wait for the message to be received, nor
+ * will notification be given when it does happen.
  *
  * Arguments:
  *
  *	partid - ID of partition to which the channel is connected.
  *	ch_number - channel # to send message on.
- *	payload - pointer to the payload area allocated via
- *			xpc_initiate_allocate().
+ *	flags - see xp.h for valid flags.
+ *	payload - pointer to the payload which is to be sent.
+ *	payload_size - size of the payload in bytes.
  */
 enum xp_retval
-xpc_initiate_send(short partid, int ch_number, void *payload)
+xpc_initiate_send(short partid, int ch_number, u32 flags, void *payload,
+		  u16 payload_size)
 {
 	struct xpc_partition *part = &xpc_partitions[partid];
-	struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
-	enum xp_retval ret;
+	enum xp_retval ret = xpUnknownReason;
 
-	dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg,
+	dev_dbg(xpc_chan, "payload=0x%p, partid=%d, channel=%d\n", payload,
 		partid, ch_number);
 
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+	DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 	DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
-	DBUG_ON(msg == NULL);
+	DBUG_ON(payload == NULL);
 
-	ret = xpc_send_msg(&part->channels[ch_number], msg, 0, NULL, NULL);
+	if (xpc_part_ref(part)) {
+		ret = xpc_send_payload(&part->channels[ch_number], flags,
+				       payload, payload_size, 0, NULL, NULL);
+		xpc_part_deref(part);
+	}
 
 	return ret;
 }
 
 /*
- * Send a message previously allocated using xpc_initiate_allocate on the
- * specified channel connected to the specified partition.
+ * Send a message that contains the user's payload on the specified channel
+ * connected to the specified partition.
  *
- * This routine will not wait for the message to be sent. Once this routine
- * has returned the message entry allocated via xpc_initiate_allocate() is no
- * longer accessable to the caller.
+ * NOTE that this routine can sleep waiting for a message entry to become
+ * available. To not sleep, pass in the XPC_NOWAIT flag.
+ *
+ * This routine will not wait for the message to be sent or received.
  *
  * Once the remote end of the channel has received the message, the function
  * passed as an argument to xpc_initiate_send_notify() will be called. This
@@ -1943,158 +884,51 @@ xpc_initiate_send(short partid, int ch_number, void *payload)
  *
  * If this routine returns an error, the caller's function will NOT be called.
  *
- * This routine, although called by users, does not call xpc_part_ref() to
- * ensure that the partition infrastructure is in place. It relies on the
- * fact that we called xpc_msgqueue_ref() in xpc_allocate_msg().
- *
  * Arguments:
  *
  *	partid - ID of partition to which the channel is connected.
  *	ch_number - channel # to send message on.
- *	payload - pointer to the payload area allocated via
- *			xpc_initiate_allocate().
+ *	flags - see xp.h for valid flags.
+ *	payload - pointer to the payload which is to be sent.
+ *	payload_size - size of the payload in bytes.
  *	func - function to call with asynchronous notification of message
  *		  receipt. THIS FUNCTION MUST BE NON-BLOCKING.
  *	key - user-defined key to be passed to the function when it's called.
  */
 enum xp_retval
-xpc_initiate_send_notify(short partid, int ch_number, void *payload,
-			 xpc_notify_func func, void *key)
+xpc_initiate_send_notify(short partid, int ch_number, u32 flags, void *payload,
+			 u16 payload_size, xpc_notify_func func, void *key)
 {
 	struct xpc_partition *part = &xpc_partitions[partid];
-	struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
-	enum xp_retval ret;
+	enum xp_retval ret = xpUnknownReason;
 
-	dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg,
+	dev_dbg(xpc_chan, "payload=0x%p, partid=%d, channel=%d\n", payload,
 		partid, ch_number);
 
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+	DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 	DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
-	DBUG_ON(msg == NULL);
+	DBUG_ON(payload == NULL);
 	DBUG_ON(func == NULL);
 
-	ret = xpc_send_msg(&part->channels[ch_number], msg, XPC_N_CALL,
-			   func, key);
-	return ret;
-}
-
-static struct xpc_msg *
-xpc_pull_remote_msg(struct xpc_channel *ch, s64 get)
-{
-	struct xpc_partition *part = &xpc_partitions[ch->partid];
-	struct xpc_msg *remote_msg, *msg;
-	u32 msg_index, nmsgs;
-	u64 msg_offset;
-	enum xp_retval ret;
-
-	if (mutex_lock_interruptible(&ch->msg_to_pull_mutex) != 0) {
-		/* we were interrupted by a signal */
-		return NULL;
-	}
-
-	while (get >= ch->next_msg_to_pull) {
-
-		/* pull as many messages as are ready and able to be pulled */
-
-		msg_index = ch->next_msg_to_pull % ch->remote_nentries;
-
-		DBUG_ON(ch->next_msg_to_pull >= ch->w_remote_GP.put);
-		nmsgs = ch->w_remote_GP.put - ch->next_msg_to_pull;
-		if (msg_index + nmsgs > ch->remote_nentries) {
-			/* ignore the ones that wrap the msg queue for now */
-			nmsgs = ch->remote_nentries - msg_index;
-		}
-
-		msg_offset = msg_index * ch->msg_size;
-		msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset);
-		remote_msg = (struct xpc_msg *)(ch->remote_msgqueue_pa +
-						msg_offset);
-
-		ret = xpc_pull_remote_cachelines(part, msg, remote_msg,
-						 nmsgs * ch->msg_size);
-		if (ret != xpSuccess) {
-
-			dev_dbg(xpc_chan, "failed to pull %d msgs starting with"
-				" msg %ld from partition %d, channel=%d, "
-				"ret=%d\n", nmsgs, ch->next_msg_to_pull,
-				ch->partid, ch->number, ret);
-
-			XPC_DEACTIVATE_PARTITION(part, ret);
-
-			mutex_unlock(&ch->msg_to_pull_mutex);
-			return NULL;
-		}
-
-		ch->next_msg_to_pull += nmsgs;
+	if (xpc_part_ref(part)) {
+		ret = xpc_send_payload(&part->channels[ch_number], flags,
+				       payload, payload_size, XPC_N_CALL, func,
+				       key);
+		xpc_part_deref(part);
 	}
-
-	mutex_unlock(&ch->msg_to_pull_mutex);
-
-	/* return the message we were looking for */
-	msg_offset = (get % ch->remote_nentries) * ch->msg_size;
-	msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset);
-
-	return msg;
-}
-
-/*
- * Get a message to be delivered.
- */
-static struct xpc_msg *
-xpc_get_deliverable_msg(struct xpc_channel *ch)
-{
-	struct xpc_msg *msg = NULL;
-	s64 get;
-
-	do {
-		if (ch->flags & XPC_C_DISCONNECTING)
-			break;
-
-		get = ch->w_local_GP.get;
-		rmb();	/* guarantee that .get loads before .put */
-		if (get == ch->w_remote_GP.put)
-			break;
-
-		/* There are messages waiting to be pulled and delivered.
-		 * We need to try to secure one for ourselves. We'll do this
-		 * by trying to increment w_local_GP.get and hope that no one
-		 * else beats us to it. If they do, we'll we'll simply have
-		 * to try again for the next one.
-		 */
-
-		if (cmpxchg(&ch->w_local_GP.get, get, get + 1) == get) {
-			/* we got the entry referenced by get */
-
-			dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, "
-				"partid=%d, channel=%d\n", get + 1,
-				ch->partid, ch->number);
-
-			/* pull the message from the remote partition */
-
-			msg = xpc_pull_remote_msg(ch, get);
-
-			DBUG_ON(msg != NULL && msg->number != get);
-			DBUG_ON(msg != NULL && (msg->flags & XPC_M_DONE));
-			DBUG_ON(msg != NULL && !(msg->flags & XPC_M_READY));
-
-			break;
-		}
-
-	} while (1);
-
-	return msg;
+	return ret;
 }
 
 /*
- * Deliver a message to its intended recipient.
+ * Deliver a message's payload to its intended recipient.
  */
 void
-xpc_deliver_msg(struct xpc_channel *ch)
+xpc_deliver_payload(struct xpc_channel *ch)
 {
-	struct xpc_msg *msg;
+	void *payload;
 
-	msg = xpc_get_deliverable_msg(ch);
-	if (msg != NULL) {
+	payload = xpc_get_deliverable_payload(ch);
+	if (payload != NULL) {
 
 		/*
 		 * This ref is taken to protect the payload itself from being
@@ -2106,18 +940,16 @@ xpc_deliver_msg(struct xpc_channel *ch)
 		atomic_inc(&ch->kthreads_active);
 
 		if (ch->func != NULL) {
-			dev_dbg(xpc_chan, "ch->func() called, msg=0x%p, "
-				"msg_number=%ld, partid=%d, channel=%d\n",
-				(void *)msg, msg->number, ch->partid,
+			dev_dbg(xpc_chan, "ch->func() called, payload=0x%p "
+				"partid=%d channel=%d\n", payload, ch->partid,
 				ch->number);
 
 			/* deliver the message to its intended recipient */
-			ch->func(xpMsgReceived, ch->partid, ch->number,
-				 &msg->payload, ch->key);
+			ch->func(xpMsgReceived, ch->partid, ch->number, payload,
+				 ch->key);
 
-			dev_dbg(xpc_chan, "ch->func() returned, msg=0x%p, "
-				"msg_number=%ld, partid=%d, channel=%d\n",
-				(void *)msg, msg->number, ch->partid,
+			dev_dbg(xpc_chan, "ch->func() returned, payload=0x%p "
+				"partid=%d channel=%d\n", payload, ch->partid,
 				ch->number);
 		}
 
@@ -2126,118 +958,31 @@ xpc_deliver_msg(struct xpc_channel *ch)
 }
 
 /*
- * Now we actually acknowledge the messages that have been delivered and ack'd
- * by advancing the cached remote message queue's Get value and if requested
- * send an IPI to the message sender's partition.
- */
-static void
-xpc_acknowledge_msgs(struct xpc_channel *ch, s64 initial_get, u8 msg_flags)
-{
-	struct xpc_msg *msg;
-	s64 get = initial_get + 1;
-	int send_IPI = 0;
-
-	while (1) {
-
-		while (1) {
-			if (get == ch->w_local_GP.get)
-				break;
-
-			msg = (struct xpc_msg *)((u64)ch->remote_msgqueue +
-						 (get % ch->remote_nentries) *
-						 ch->msg_size);
-
-			if (!(msg->flags & XPC_M_DONE))
-				break;
-
-			msg_flags |= msg->flags;
-			get++;
-		}
-
-		if (get == initial_get) {
-			/* nothing's changed */
-			break;
-		}
-
-		if (cmpxchg_rel(&ch->local_GP->get, initial_get, get) !=
-		    initial_get) {
-			/* someone else beat us to it */
-			DBUG_ON(ch->local_GP->get <= initial_get);
-			break;
-		}
-
-		/* we just set the new value of local_GP->get */
-
-		dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, "
-			"channel=%d\n", get, ch->partid, ch->number);
-
-		send_IPI = (msg_flags & XPC_M_INTERRUPT);
-
-		/*
-		 * We need to ensure that the message referenced by
-		 * local_GP->get is not XPC_M_DONE or that local_GP->get
-		 * equals w_local_GP.get, so we'll go have a look.
-		 */
-		initial_get = get;
-	}
-
-	if (send_IPI)
-		xpc_IPI_send_msgrequest(ch);
-}
-
-/*
- * Acknowledge receipt of a delivered message.
- *
- * If a message has XPC_M_INTERRUPT set, send an interrupt to the partition
- * that sent the message.
+ * Acknowledge receipt of a delivered message's payload.
  *
  * This function, although called by users, does not call xpc_part_ref() to
  * ensure that the partition infrastructure is in place. It relies on the
- * fact that we called xpc_msgqueue_ref() in xpc_deliver_msg().
+ * fact that we called xpc_msgqueue_ref() in xpc_deliver_payload().
  *
  * Arguments:
  *
  *	partid - ID of partition to which the channel is connected.
  *	ch_number - channel # message received on.
  *	payload - pointer to the payload area allocated via
- *			xpc_initiate_allocate().
+ *			xpc_initiate_send() or xpc_initiate_send_notify().
  */
 void
 xpc_initiate_received(short partid, int ch_number, void *payload)
 {
 	struct xpc_partition *part = &xpc_partitions[partid];
 	struct xpc_channel *ch;
-	struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
-	s64 get, msg_number = msg->number;
 
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+	DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 	DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
 
 	ch = &part->channels[ch_number];
+	xpc_received_payload(ch, payload);
 
-	dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n",
-		(void *)msg, msg_number, ch->partid, ch->number);
-
-	DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->msg_size) !=
-		msg_number % ch->remote_nentries);
-	DBUG_ON(msg->flags & XPC_M_DONE);
-
-	msg->flags |= XPC_M_DONE;
-
-	/*
-	 * The preceding store of msg->flags must occur before the following
-	 * load of ch->local_GP->get.
-	 */
-	mb();
-
-	/*
-	 * See if this message is next in line to be acknowledged as having
-	 * been delivered.
-	 */
-	get = ch->local_GP->get;
-	if (get == msg_number)
-		xpc_acknowledge_msgs(ch, get, msg->flags);
-
-	/* the call to xpc_msgqueue_ref() was done by xpc_deliver_msg()  */
+	/* the call to xpc_msgqueue_ref() was done by xpc_deliver_payload()  */
 	xpc_msgqueue_deref(ch);
 }
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index c3b4227..46325fc 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -25,37 +25,31 @@
  *
  *	Caveats:
  *
- *	  . We currently have no way to determine which nasid an IPI came
- *	    from. Thus, xpc_IPI_send() does a remote AMO write followed by
- *	    an IPI. The AMO indicates where data is to be pulled from, so
- *	    after the IPI arrives, the remote partition checks the AMO word.
- *	    The IPI can actually arrive before the AMO however, so other code
- *	    must periodically check for this case. Also, remote AMO operations
- *	    do not reliably time out. Thus we do a remote PIO read solely to
- *	    know whether the remote partition is down and whether we should
- *	    stop sending IPIs to it. This remote PIO read operation is set up
- *	    in a special nofault region so SAL knows to ignore (and cleanup)
- *	    any errors due to the remote AMO write, PIO read, and/or PIO
- *	    write operations.
+ *	  . Currently on sn2, we have no way to determine which nasid an IRQ
+ *	    came from. Thus, xpc_send_IRQ_sn2() does a remote amo write
+ *	    followed by an IPI. The amo indicates where data is to be pulled
+ *	    from, so after the IPI arrives, the remote partition checks the amo
+ *	    word. The IPI can actually arrive before the amo however, so other
+ *	    code must periodically check for this case. Also, remote amo
+ *	    operations do not reliably time out. Thus we do a remote PIO read
+ *	    solely to know whether the remote partition is down and whether we
+ *	    should stop sending IPIs to it. This remote PIO read operation is
+ *	    set up in a special nofault region so SAL knows to ignore (and
+ *	    cleanup) any errors due to the remote amo write, PIO read, and/or
+ *	    PIO write operations.
  *
  *	    If/when new hardware solves this IPI problem, we should abandon
  *	    the current approach.
  *
  */
 
-#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
-#include <linux/cache.h>
-#include <linux/interrupt.h>
+#include <linux/sysctl.h>
+#include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>
-#include <linux/completion.h>
 #include <linux/kdebug.h>
 #include <linux/kthread.h>
-#include <linux/uaccess.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn_sal.h>
 #include "xpc.h"
 
 /* define two XPC debug device structures to be used with dev_dbg() et al */
@@ -89,9 +83,9 @@ static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL;
 static int xpc_hb_check_min_interval = 10;
 static int xpc_hb_check_max_interval = 120;
 
-int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT;
-static int xpc_disengage_request_min_timelimit;	/* = 0 */
-static int xpc_disengage_request_max_timelimit = 120;
+int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT;
+static int xpc_disengage_min_timelimit;	/* = 0 */
+static int xpc_disengage_max_timelimit = 120;
 
 static ctl_table xpc_sys_xpc_hb_dir[] = {
 	{
@@ -124,14 +118,14 @@ static ctl_table xpc_sys_xpc_dir[] = {
 	 .child = xpc_sys_xpc_hb_dir},
 	{
 	 .ctl_name = CTL_UNNUMBERED,
-	 .procname = "disengage_request_timelimit",
-	 .data = &xpc_disengage_request_timelimit,
+	 .procname = "disengage_timelimit",
+	 .data = &xpc_disengage_timelimit,
 	 .maxlen = sizeof(int),
 	 .mode = 0644,
 	 .proc_handler = &proc_dointvec_minmax,
 	 .strategy = &sysctl_intvec,
-	 .extra1 = &xpc_disengage_request_min_timelimit,
-	 .extra2 = &xpc_disengage_request_max_timelimit},
+	 .extra1 = &xpc_disengage_min_timelimit,
+	 .extra2 = &xpc_disengage_max_timelimit},
 	{}
 };
 static ctl_table xpc_sys_dir[] = {
@@ -144,16 +138,19 @@ static ctl_table xpc_sys_dir[] = {
 };
 static struct ctl_table_header *xpc_sysctl;
 
-/* non-zero if any remote partition disengage request was timed out */
-int xpc_disengage_request_timedout;
+/* non-zero if any remote partition disengage was timed out */
+int xpc_disengage_timedout;
 
-/* #of IRQs received */
-static atomic_t xpc_act_IRQ_rcvd;
+/* #of activate IRQs received and not yet processed */
+int xpc_activate_IRQ_rcvd;
+DEFINE_SPINLOCK(xpc_activate_IRQ_rcvd_lock);
 
 /* IRQ handler notifies this wait queue on receipt of an IRQ */
-static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq);
+DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq);
 
 static unsigned long xpc_hb_check_timeout;
+static struct timer_list xpc_hb_timer;
+void *xpc_heartbeating_to_mask;
 
 /* notification that the xpc_hb_checker thread has exited */
 static DECLARE_COMPLETION(xpc_hb_checker_exited);
@@ -161,8 +158,6 @@ static DECLARE_COMPLETION(xpc_hb_checker_exited);
 /* notification that the xpc_discovery thread has exited */
 static DECLARE_COMPLETION(xpc_discovery_exited);
 
-static struct timer_list xpc_hb_timer;
-
 static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *);
 
 static int xpc_system_reboot(struct notifier_block *, unsigned long, void *);
@@ -175,31 +170,76 @@ static struct notifier_block xpc_die_notifier = {
 	.notifier_call = xpc_system_die,
 };
 
+int (*xpc_setup_partitions_sn) (void);
+enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie,
+						  unsigned long *rp_pa,
+						  size_t *len);
+int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *rp);
+void (*xpc_heartbeat_init) (void);
+void (*xpc_heartbeat_exit) (void);
+void (*xpc_increment_heartbeat) (void);
+void (*xpc_offline_heartbeat) (void);
+void (*xpc_online_heartbeat) (void);
+enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *part);
+
+enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part);
+void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch);
+u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part);
+enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *ch);
+void (*xpc_teardown_msg_structures) (struct xpc_channel *ch);
+void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number);
+int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *ch);
+void *(*xpc_get_deliverable_payload) (struct xpc_channel *ch);
+
+void (*xpc_request_partition_activation) (struct xpc_rsvd_page *remote_rp,
+					  unsigned long remote_rp_pa,
+					  int nasid);
+void (*xpc_request_partition_reactivation) (struct xpc_partition *part);
+void (*xpc_request_partition_deactivation) (struct xpc_partition *part);
+void (*xpc_cancel_partition_deactivation_request) (struct xpc_partition *part);
+
+void (*xpc_process_activate_IRQ_rcvd) (void);
+enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *part);
+void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *part);
+
+void (*xpc_indicate_partition_engaged) (struct xpc_partition *part);
+int (*xpc_partition_engaged) (short partid);
+int (*xpc_any_partition_engaged) (void);
+void (*xpc_indicate_partition_disengaged) (struct xpc_partition *part);
+void (*xpc_assume_partition_disengaged) (short partid);
+
+void (*xpc_send_chctl_closerequest) (struct xpc_channel *ch,
+				     unsigned long *irq_flags);
+void (*xpc_send_chctl_closereply) (struct xpc_channel *ch,
+				   unsigned long *irq_flags);
+void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch,
+				    unsigned long *irq_flags);
+void (*xpc_send_chctl_openreply) (struct xpc_channel *ch,
+				  unsigned long *irq_flags);
+
+void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch,
+				     unsigned long msgqueue_pa);
+
+enum xp_retval (*xpc_send_payload) (struct xpc_channel *ch, u32 flags,
+				    void *payload, u16 payload_size,
+				    u8 notify_type, xpc_notify_func func,
+				    void *key);
+void (*xpc_received_payload) (struct xpc_channel *ch, void *payload);
+
 /*
- * Timer function to enforce the timelimit on the partition disengage request.
+ * Timer function to enforce the timelimit on the partition disengage.
  */
 static void
-xpc_timeout_partition_disengage_request(unsigned long data)
+xpc_timeout_partition_disengage(unsigned long data)
 {
 	struct xpc_partition *part = (struct xpc_partition *)data;
 
-	DBUG_ON(time_before(jiffies, part->disengage_request_timeout));
+	DBUG_ON(time_is_after_jiffies(part->disengage_timeout));
 
 	(void)xpc_partition_disengaged(part);
 
-	DBUG_ON(part->disengage_request_timeout != 0);
-	DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0);
-}
-
-/*
- * Notify the heartbeat check thread that an IRQ has been received.
- */
-static irqreturn_t
-xpc_act_IRQ_handler(int irq, void *dev_id)
-{
-	atomic_inc(&xpc_act_IRQ_rcvd);
-	wake_up_interruptible(&xpc_act_IRQ_wq);
-	return IRQ_HANDLED;
+	DBUG_ON(part->disengage_timeout != 0);
+	DBUG_ON(xpc_partition_engaged(XPC_PARTID(part)));
 }
 
 /*
@@ -210,15 +250,63 @@ xpc_act_IRQ_handler(int irq, void *dev_id)
 static void
 xpc_hb_beater(unsigned long dummy)
 {
-	xpc_vars->heartbeat++;
+	xpc_increment_heartbeat();
 
-	if (time_after_eq(jiffies, xpc_hb_check_timeout))
-		wake_up_interruptible(&xpc_act_IRQ_wq);
+	if (time_is_before_eq_jiffies(xpc_hb_check_timeout))
+		wake_up_interruptible(&xpc_activate_IRQ_wq);
 
 	xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ);
 	add_timer(&xpc_hb_timer);
 }
 
+static void
+xpc_start_hb_beater(void)
+{
+	xpc_heartbeat_init();
+	init_timer(&xpc_hb_timer);
+	xpc_hb_timer.function = xpc_hb_beater;
+	xpc_hb_beater(0);
+}
+
+static void
+xpc_stop_hb_beater(void)
+{
+	del_timer_sync(&xpc_hb_timer);
+	xpc_heartbeat_exit();
+}
+
+/*
+ * At periodic intervals, scan through all active partitions and ensure
+ * their heartbeat is still active.  If not, the partition is deactivated.
+ */
+static void
+xpc_check_remote_hb(void)
+{
+	struct xpc_partition *part;
+	short partid;
+	enum xp_retval ret;
+
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
+
+		if (xpc_exiting)
+			break;
+
+		if (partid == xp_partition_id)
+			continue;
+
+		part = &xpc_partitions[partid];
+
+		if (part->act_state == XPC_P_AS_INACTIVE ||
+		    part->act_state == XPC_P_AS_DEACTIVATING) {
+			continue;
+		}
+
+		ret = xpc_get_remote_heartbeat(part);
+		if (ret != xpSuccess)
+			XPC_DEACTIVATE_PARTITION(part, ret);
+	}
+}
+
 /*
  * This thread is responsible for nearly all of the partition
  * activation/deactivation.
@@ -226,8 +314,6 @@ xpc_hb_beater(unsigned long dummy)
 static int
 xpc_hb_checker(void *ignore)
 {
-	int last_IRQ_count = 0;
-	int new_IRQ_count;
 	int force_IRQ = 0;
 
 	/* this thread was marked active by xpc_hb_init() */
@@ -236,56 +322,49 @@ xpc_hb_checker(void *ignore)
 
 	/* set our heartbeating to other partitions into motion */
 	xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ);
-	xpc_hb_beater(0);
+	xpc_start_hb_beater();
 
 	while (!xpc_exiting) {
 
 		dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have "
 			"been received\n",
 			(int)(xpc_hb_check_timeout - jiffies),
-			atomic_read(&xpc_act_IRQ_rcvd) - last_IRQ_count);
+			xpc_activate_IRQ_rcvd);
 
 		/* checking of remote heartbeats is skewed by IRQ handling */
-		if (time_after_eq(jiffies, xpc_hb_check_timeout)) {
+		if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) {
+			xpc_hb_check_timeout = jiffies +
+			    (xpc_hb_check_interval * HZ);
+
 			dev_dbg(xpc_part, "checking remote heartbeats\n");
 			xpc_check_remote_hb();
 
 			/*
-			 * We need to periodically recheck to ensure no
-			 * IPI/AMO pairs have been missed.  That check
-			 * must always reset xpc_hb_check_timeout.
+			 * On sn2 we need to periodically recheck to ensure no
+			 * IRQ/amo pairs have been missed.
 			 */
-			force_IRQ = 1;
+			if (is_shub())
+				force_IRQ = 1;
 		}
 
 		/* check for outstanding IRQs */
-		new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd);
-		if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) {
+		if (xpc_activate_IRQ_rcvd > 0 || force_IRQ != 0) {
 			force_IRQ = 0;
-
-			dev_dbg(xpc_part, "found an IRQ to process; will be "
-				"resetting xpc_hb_check_timeout\n");
-
-			last_IRQ_count += xpc_identify_act_IRQ_sender();
-			if (last_IRQ_count < new_IRQ_count) {
-				/* retry once to help avoid missing AMO */
-				(void)xpc_identify_act_IRQ_sender();
-			}
-			last_IRQ_count = new_IRQ_count;
-
-			xpc_hb_check_timeout = jiffies +
-			    (xpc_hb_check_interval * HZ);
+			dev_dbg(xpc_part, "processing activate IRQs "
+				"received\n");
+			xpc_process_activate_IRQ_rcvd();
 		}
 
 		/* wait for IRQ or timeout */
-		(void)wait_event_interruptible(xpc_act_IRQ_wq,
-					       (last_IRQ_count <
-						atomic_read(&xpc_act_IRQ_rcvd)
-						|| time_after_eq(jiffies,
-							xpc_hb_check_timeout) ||
+		(void)wait_event_interruptible(xpc_activate_IRQ_wq,
+					       (time_is_before_eq_jiffies(
+						xpc_hb_check_timeout) ||
+						xpc_activate_IRQ_rcvd > 0 ||
 						xpc_exiting));
 	}
 
+	xpc_stop_hb_beater();
+
 	dev_dbg(xpc_part, "heartbeat checker is exiting\n");
 
 	/* mark this thread as having exited */
@@ -311,37 +390,8 @@ xpc_initiate_discovery(void *ignore)
 }
 
 /*
- * Establish first contact with the remote partititon. This involves pulling
- * the XPC per partition variables from the remote partition and waiting for
- * the remote partition to pull ours.
- */
-static enum xp_retval
-xpc_make_first_contact(struct xpc_partition *part)
-{
-	enum xp_retval ret;
-
-	while ((ret = xpc_pull_remote_vars_part(part)) != xpSuccess) {
-		if (ret != xpRetry) {
-			XPC_DEACTIVATE_PARTITION(part, ret);
-			return ret;
-		}
-
-		dev_dbg(xpc_chan, "waiting to make first contact with "
-			"partition %d\n", XPC_PARTID(part));
-
-		/* wait a 1/4 of a second or so */
-		(void)msleep_interruptible(250);
-
-		if (part->act_state == XPC_P_DEACTIVATING)
-			return part->reason;
-	}
-
-	return xpc_mark_partition_active(part);
-}
-
-/*
  * The first kthread assigned to a newly activated partition is the one
- * created by XPC HB with which it calls xpc_partition_up(). XPC hangs on to
+ * created by XPC HB with which it calls xpc_activating(). XPC hangs on to
  * that kthread until the partition is brought down, at which time that kthread
  * returns back to XPC HB. (The return of that kthread will signify to XPC HB
  * that XPC has dismantled all communication infrastructure for the associated
@@ -354,11 +404,11 @@ xpc_make_first_contact(struct xpc_partition *part)
 static void
 xpc_channel_mgr(struct xpc_partition *part)
 {
-	while (part->act_state != XPC_P_DEACTIVATING ||
+	while (part->act_state != XPC_P_AS_DEACTIVATING ||
 	       atomic_read(&part->nchannels_active) > 0 ||
 	       !xpc_partition_disengaged(part)) {
 
-		xpc_process_channel_activity(part);
+		xpc_process_sent_chctl_flags(part);
 
 		/*
 		 * Wait until we've been requested to activate kthreads or
@@ -376,8 +426,8 @@ xpc_channel_mgr(struct xpc_partition *part)
 		atomic_dec(&part->channel_mgr_requests);
 		(void)wait_event_interruptible(part->channel_mgr_wq,
 				(atomic_read(&part->channel_mgr_requests) > 0 ||
-				 part->local_IPI_amo != 0 ||
-				 (part->act_state == XPC_P_DEACTIVATING &&
+				 part->chctl.all_flags != 0 ||
+				 (part->act_state == XPC_P_AS_DEACTIVATING &&
 				 atomic_read(&part->nchannels_active) == 0 &&
 				 xpc_partition_disengaged(part))));
 		atomic_set(&part->channel_mgr_requests, 1);
@@ -385,47 +435,163 @@ xpc_channel_mgr(struct xpc_partition *part)
 }
 
 /*
- * When XPC HB determines that a partition has come up, it will create a new
- * kthread and that kthread will call this function to attempt to set up the
- * basic infrastructure used for Cross Partition Communication with the newly
- * upped partition.
- *
- * The kthread that was created by XPC HB and which setup the XPC
- * infrastructure will remain assigned to the partition until the partition
- * goes down. At which time the kthread will teardown the XPC infrastructure
- * and then exit.
- *
- * XPC HB will put the remote partition's XPC per partition specific variables
- * physical address into xpc_partitions[partid].remote_vars_part_pa prior to
- * calling xpc_partition_up().
+ * Guarantee that the kzalloc'd memory is cacheline aligned.
  */
-static void
-xpc_partition_up(struct xpc_partition *part)
+void *
+xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
+{
+	/* see if kzalloc will give us cachline aligned memory by default */
+	*base = kzalloc(size, flags);
+	if (*base == NULL)
+		return NULL;
+
+	if ((u64)*base == L1_CACHE_ALIGN((u64)*base))
+		return *base;
+
+	kfree(*base);
+
+	/* nope, we'll have to do it ourselves */
+	*base = kzalloc(size + L1_CACHE_BYTES, flags);
+	if (*base == NULL)
+		return NULL;
+
+	return (void *)L1_CACHE_ALIGN((u64)*base);
+}
+
+/*
+ * Setup the channel structures necessary to support XPartition Communication
+ * between the specified remote partition and the local one.
+ */
+static enum xp_retval
+xpc_setup_ch_structures(struct xpc_partition *part)
 {
+	enum xp_retval ret;
+	int ch_number;
+	struct xpc_channel *ch;
+	short partid = XPC_PARTID(part);
+
+	/*
+	 * Allocate all of the channel structures as a contiguous chunk of
+	 * memory.
+	 */
 	DBUG_ON(part->channels != NULL);
+	part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_MAX_NCHANNELS,
+				 GFP_KERNEL);
+	if (part->channels == NULL) {
+		dev_err(xpc_chan, "can't get memory for channels\n");
+		return xpNoMemory;
+	}
 
-	dev_dbg(xpc_chan, "activating partition %d\n", XPC_PARTID(part));
+	/* allocate the remote open and close args */
 
-	if (xpc_setup_infrastructure(part) != xpSuccess)
-		return;
+	part->remote_openclose_args =
+	    xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE,
+					  GFP_KERNEL, &part->
+					  remote_openclose_args_base);
+	if (part->remote_openclose_args == NULL) {
+		dev_err(xpc_chan, "can't get memory for remote connect args\n");
+		ret = xpNoMemory;
+		goto out_1;
+	}
+
+	part->chctl.all_flags = 0;
+	spin_lock_init(&part->chctl_lock);
+
+	atomic_set(&part->channel_mgr_requests, 1);
+	init_waitqueue_head(&part->channel_mgr_wq);
+
+	part->nchannels = XPC_MAX_NCHANNELS;
+
+	atomic_set(&part->nchannels_active, 0);
+	atomic_set(&part->nchannels_engaged, 0);
+
+	for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
+		ch = &part->channels[ch_number];
+
+		ch->partid = partid;
+		ch->number = ch_number;
+		ch->flags = XPC_C_DISCONNECTED;
+
+		atomic_set(&ch->kthreads_assigned, 0);
+		atomic_set(&ch->kthreads_idle, 0);
+		atomic_set(&ch->kthreads_active, 0);
+
+		atomic_set(&ch->references, 0);
+		atomic_set(&ch->n_to_notify, 0);
+
+		spin_lock_init(&ch->lock);
+		init_completion(&ch->wdisconnect_wait);
+
+		atomic_set(&ch->n_on_msg_allocate_wq, 0);
+		init_waitqueue_head(&ch->msg_allocate_wq);
+		init_waitqueue_head(&ch->idle_wq);
+	}
+
+	ret = xpc_setup_ch_structures_sn(part);
+	if (ret != xpSuccess)
+		goto out_2;
+
+	/*
+	 * With the setting of the partition setup_state to XPC_P_SS_SETUP,
+	 * we're declaring that this partition is ready to go.
+	 */
+	part->setup_state = XPC_P_SS_SETUP;
+
+	return xpSuccess;
+
+	/* setup of ch structures failed */
+out_2:
+	kfree(part->remote_openclose_args_base);
+	part->remote_openclose_args = NULL;
+out_1:
+	kfree(part->channels);
+	part->channels = NULL;
+	return ret;
+}
+
+/*
+ * Teardown the channel structures necessary to support XPartition Communication
+ * between the specified remote partition and the local one.
+ */
+static void
+xpc_teardown_ch_structures(struct xpc_partition *part)
+{
+	DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
+	DBUG_ON(atomic_read(&part->nchannels_active) != 0);
 
 	/*
-	 * The kthread that XPC HB called us with will become the
-	 * channel manager for this partition. It will not return
-	 * back to XPC HB until the partition's XPC infrastructure
-	 * has been dismantled.
+	 * Make this partition inaccessible to local processes by marking it
+	 * as no longer setup. Then wait before proceeding with the teardown
+	 * until all existing references cease.
 	 */
+	DBUG_ON(part->setup_state != XPC_P_SS_SETUP);
+	part->setup_state = XPC_P_SS_WTEARDOWN;
 
-	(void)xpc_part_ref(part);	/* this will always succeed */
+	wait_event(part->teardown_wq, (atomic_read(&part->references) == 0));
 
-	if (xpc_make_first_contact(part) == xpSuccess)
-		xpc_channel_mgr(part);
+	/* now we can begin tearing down the infrastructure */
 
-	xpc_part_deref(part);
+	xpc_teardown_ch_structures_sn(part);
 
-	xpc_teardown_infrastructure(part);
+	kfree(part->remote_openclose_args_base);
+	part->remote_openclose_args = NULL;
+	kfree(part->channels);
+	part->channels = NULL;
+
+	part->setup_state = XPC_P_SS_TORNDOWN;
 }
 
+/*
+ * When XPC HB determines that a partition has come up, it will create a new
+ * kthread and that kthread will call this function to attempt to set up the
+ * basic infrastructure used for Cross Partition Communication with the newly
+ * upped partition.
+ *
+ * The kthread that was created by XPC HB and which setup the XPC
+ * infrastructure will remain assigned to the partition becoming the channel
+ * manager for that partition until the partition is deactivating, at which
+ * time the kthread will teardown the XPC infrastructure and then exit.
+ */
 static int
 xpc_activating(void *__partid)
 {
@@ -433,64 +599,47 @@ xpc_activating(void *__partid)
 	struct xpc_partition *part = &xpc_partitions[partid];
 	unsigned long irq_flags;
 
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+	DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
 
-	if (part->act_state == XPC_P_DEACTIVATING) {
-		part->act_state = XPC_P_INACTIVE;
+	if (part->act_state == XPC_P_AS_DEACTIVATING) {
+		part->act_state = XPC_P_AS_INACTIVE;
 		spin_unlock_irqrestore(&part->act_lock, irq_flags);
 		part->remote_rp_pa = 0;
 		return 0;
 	}
 
 	/* indicate the thread is activating */
-	DBUG_ON(part->act_state != XPC_P_ACTIVATION_REQ);
-	part->act_state = XPC_P_ACTIVATING;
+	DBUG_ON(part->act_state != XPC_P_AS_ACTIVATION_REQ);
+	part->act_state = XPC_P_AS_ACTIVATING;
 
 	XPC_SET_REASON(part, 0, 0);
 	spin_unlock_irqrestore(&part->act_lock, irq_flags);
 
-	dev_dbg(xpc_part, "bringing partition %d up\n", partid);
+	dev_dbg(xpc_part, "activating partition %d\n", partid);
 
-	/*
-	 * Register the remote partition's AMOs with SAL so it can handle
-	 * and cleanup errors within that address range should the remote
-	 * partition go down. We don't unregister this range because it is
-	 * difficult to tell when outstanding writes to the remote partition
-	 * are finished and thus when it is safe to unregister. This should
-	 * not result in wasted space in the SAL xp_addr_region table because
-	 * we should get the same page for remote_amos_page_pa after module
-	 * reloads and system reboots.
-	 */
-	if (sn_register_xp_addr_region(part->remote_amos_page_pa,
-				       PAGE_SIZE, 1) < 0) {
-		dev_warn(xpc_part, "xpc_partition_up(%d) failed to register "
-			 "xp_addr region\n", partid);
+	xpc_allow_hb(partid);
 
-		spin_lock_irqsave(&part->act_lock, irq_flags);
-		part->act_state = XPC_P_INACTIVE;
-		XPC_SET_REASON(part, xpPhysAddrRegFailed, __LINE__);
-		spin_unlock_irqrestore(&part->act_lock, irq_flags);
-		part->remote_rp_pa = 0;
-		return 0;
-	}
+	if (xpc_setup_ch_structures(part) == xpSuccess) {
+		(void)xpc_part_ref(part);	/* this will always succeed */
 
-	xpc_allow_hb(partid, xpc_vars);
-	xpc_IPI_send_activated(part);
+		if (xpc_make_first_contact(part) == xpSuccess) {
+			xpc_mark_partition_active(part);
+			xpc_channel_mgr(part);
+			/* won't return until partition is deactivating */
+		}
 
-	/*
-	 * xpc_partition_up() holds this thread and marks this partition as
-	 * XPC_P_ACTIVE by calling xpc_hb_mark_active().
-	 */
-	(void)xpc_partition_up(part);
+		xpc_part_deref(part);
+		xpc_teardown_ch_structures(part);
+	}
 
-	xpc_disallow_hb(partid, xpc_vars);
+	xpc_disallow_hb(partid);
 	xpc_mark_partition_inactive(part);
 
 	if (part->reason == xpReactivating) {
 		/* interrupting ourselves results in activating partition */
-		xpc_IPI_send_reactivate(part);
+		xpc_request_partition_reactivation(part);
 	}
 
 	return 0;
@@ -505,9 +654,9 @@ xpc_activate_partition(struct xpc_partition *part)
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
 
-	DBUG_ON(part->act_state != XPC_P_INACTIVE);
+	DBUG_ON(part->act_state != XPC_P_AS_INACTIVE);
 
-	part->act_state = XPC_P_ACTIVATION_REQ;
+	part->act_state = XPC_P_AS_ACTIVATION_REQ;
 	XPC_SET_REASON(part, xpCloneKThread, __LINE__);
 
 	spin_unlock_irqrestore(&part->act_lock, irq_flags);
@@ -516,62 +665,12 @@ xpc_activate_partition(struct xpc_partition *part)
 			      partid);
 	if (IS_ERR(kthread)) {
 		spin_lock_irqsave(&part->act_lock, irq_flags);
-		part->act_state = XPC_P_INACTIVE;
+		part->act_state = XPC_P_AS_INACTIVE;
 		XPC_SET_REASON(part, xpCloneKThreadFailed, __LINE__);
 		spin_unlock_irqrestore(&part->act_lock, irq_flags);
 	}
 }
 
-/*
- * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified
- * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more
- * than one partition, we use an AMO_t structure per partition to indicate
- * whether a partition has sent an IPI or not.  If it has, then wake up the
- * associated kthread to handle it.
- *
- * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IPIs sent by XPC
- * running on other partitions.
- *
- * Noteworthy Arguments:
- *
- *	irq - Interrupt ReQuest number. NOT USED.
- *
- *	dev_id - partid of IPI's potential sender.
- */
-irqreturn_t
-xpc_notify_IRQ_handler(int irq, void *dev_id)
-{
-	short partid = (short)(u64)dev_id;
-	struct xpc_partition *part = &xpc_partitions[partid];
-
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
-
-	if (xpc_part_ref(part)) {
-		xpc_check_for_channel_activity(part);
-
-		xpc_part_deref(part);
-	}
-	return IRQ_HANDLED;
-}
-
-/*
- * Check to see if xpc_notify_IRQ_handler() dropped any IPIs on the floor
- * because the write to their associated IPI amo completed after the IRQ/IPI
- * was received.
- */
-void
-xpc_dropped_IPI_check(struct xpc_partition *part)
-{
-	if (xpc_part_ref(part)) {
-		xpc_check_for_channel_activity(part);
-
-		part->dropped_IPI_timer.expires = jiffies +
-		    XPC_P_DROPPED_IPI_WAIT;
-		add_timer(&part->dropped_IPI_timer);
-		xpc_part_deref(part);
-	}
-}
-
 void
 xpc_activate_kthreads(struct xpc_channel *ch, int needed)
 {
@@ -616,9 +715,9 @@ xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
 	do {
 		/* deliver messages to their intended recipients */
 
-		while (ch->w_local_GP.get < ch->w_remote_GP.put &&
+		while (xpc_n_of_deliverable_payloads(ch) > 0 &&
 		       !(ch->flags & XPC_C_DISCONNECTING)) {
-			xpc_deliver_msg(ch);
+			xpc_deliver_payload(ch);
 		}
 
 		if (atomic_inc_return(&ch->kthreads_idle) >
@@ -632,7 +731,7 @@ xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
 			"wait_event_interruptible_exclusive()\n");
 
 		(void)wait_event_interruptible_exclusive(ch->idle_wq,
-				(ch->w_local_GP.get < ch->w_remote_GP.put ||
+				(xpc_n_of_deliverable_payloads(ch) > 0 ||
 				 (ch->flags & XPC_C_DISCONNECTING)));
 
 		atomic_dec(&ch->kthreads_idle);
@@ -677,7 +776,7 @@ xpc_kthread_start(void *args)
 			 * additional kthreads to help deliver them. We only
 			 * need one less than total #of messages to deliver.
 			 */
-			n_needed = ch->w_remote_GP.put - ch->w_local_GP.get - 1;
+			n_needed = xpc_n_of_deliverable_payloads(ch) - 1;
 			if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING))
 				xpc_activate_kthreads(ch, n_needed);
 
@@ -703,11 +802,9 @@ xpc_kthread_start(void *args)
 	}
 	spin_unlock_irqrestore(&ch->lock, irq_flags);
 
-	if (atomic_dec_return(&ch->kthreads_assigned) == 0) {
-		if (atomic_dec_return(&part->nchannels_engaged) == 0) {
-			xpc_mark_partition_disengaged(part);
-			xpc_IPI_send_disengage(part);
-		}
+	if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
+	    atomic_dec_return(&part->nchannels_engaged) == 0) {
+		xpc_indicate_partition_disengaged(part);
 	}
 
 	xpc_msgqueue_deref(ch);
@@ -758,9 +855,9 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed,
 		} else if (ch->flags & XPC_C_DISCONNECTING) {
 			break;
 
-		} else if (atomic_inc_return(&ch->kthreads_assigned) == 1) {
-			if (atomic_inc_return(&part->nchannels_engaged) == 1)
-				xpc_mark_partition_engaged(part);
+		} else if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
+			   atomic_inc_return(&part->nchannels_engaged) == 1) {
+				xpc_indicate_partition_engaged(part);
 		}
 		(void)xpc_part_ref(part);
 		xpc_msgqueue_ref(ch);
@@ -782,8 +879,7 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed,
 
 			if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
 			    atomic_dec_return(&part->nchannels_engaged) == 0) {
-				xpc_mark_partition_disengaged(part);
-				xpc_IPI_send_disengage(part);
+				xpc_indicate_partition_disengaged(part);
 			}
 			xpc_msgqueue_deref(ch);
 			xpc_part_deref(part);
@@ -815,7 +911,7 @@ xpc_disconnect_wait(int ch_number)
 	int wakeup_channel_mgr;
 
 	/* now wait for all callouts to the caller's function to cease */
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
 		part = &xpc_partitions[partid];
 
 		if (!xpc_part_ref(part))
@@ -834,16 +930,15 @@ xpc_disconnect_wait(int ch_number)
 		DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
 		wakeup_channel_mgr = 0;
 
-		if (ch->delayed_IPI_flags) {
-			if (part->act_state != XPC_P_DEACTIVATING) {
-				spin_lock(&part->IPI_lock);
-				XPC_SET_IPI_FLAGS(part->local_IPI_amo,
-						  ch->number,
-						  ch->delayed_IPI_flags);
-				spin_unlock(&part->IPI_lock);
+		if (ch->delayed_chctl_flags) {
+			if (part->act_state != XPC_P_AS_DEACTIVATING) {
+				spin_lock(&part->chctl_lock);
+				part->chctl.flags[ch->number] |=
+				    ch->delayed_chctl_flags;
+				spin_unlock(&part->chctl_lock);
 				wakeup_channel_mgr = 1;
 			}
-			ch->delayed_IPI_flags = 0;
+			ch->delayed_chctl_flags = 0;
 		}
 
 		ch->flags &= ~XPC_C_WDISCONNECT;
@@ -856,13 +951,63 @@ xpc_disconnect_wait(int ch_number)
 	}
 }
 
+static int
+xpc_setup_partitions(void)
+{
+	short partid;
+	struct xpc_partition *part;
+
+	xpc_partitions = kzalloc(sizeof(struct xpc_partition) *
+				 xp_max_npartitions, GFP_KERNEL);
+	if (xpc_partitions == NULL) {
+		dev_err(xpc_part, "can't get memory for partition structure\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * The first few fields of each entry of xpc_partitions[] need to
+	 * be initialized now so that calls to xpc_connect() and
+	 * xpc_disconnect() can be made prior to the activation of any remote
+	 * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE
+	 * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
+	 * PARTITION HAS BEEN ACTIVATED.
+	 */
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
+		part = &xpc_partitions[partid];
+
+		DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part));
+
+		part->activate_IRQ_rcvd = 0;
+		spin_lock_init(&part->act_lock);
+		part->act_state = XPC_P_AS_INACTIVE;
+		XPC_SET_REASON(part, 0, 0);
+
+		init_timer(&part->disengage_timer);
+		part->disengage_timer.function =
+		    xpc_timeout_partition_disengage;
+		part->disengage_timer.data = (unsigned long)part;
+
+		part->setup_state = XPC_P_SS_UNSET;
+		init_waitqueue_head(&part->teardown_wq);
+		atomic_set(&part->references, 0);
+	}
+
+	return xpc_setup_partitions_sn();
+}
+
+static void
+xpc_teardown_partitions(void)
+{
+	kfree(xpc_partitions);
+}
+
 static void
 xpc_do_exit(enum xp_retval reason)
 {
 	short partid;
 	int active_part_count, printed_waiting_msg = 0;
 	struct xpc_partition *part;
-	unsigned long printmsg_time, disengage_request_timeout = 0;
+	unsigned long printmsg_time, disengage_timeout = 0;
 
 	/* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
 	DBUG_ON(xpc_exiting == 1);
@@ -873,10 +1018,7 @@ xpc_do_exit(enum xp_retval reason)
 	 * the heartbeat checker thread in case it's sleeping.
 	 */
 	xpc_exiting = 1;
-	wake_up_interruptible(&xpc_act_IRQ_wq);
-
-	/* ignore all incoming interrupts */
-	free_irq(SGI_XPC_ACTIVATE, NULL);
+	wake_up_interruptible(&xpc_activate_IRQ_wq);
 
 	/* wait for the discovery thread to exit */
 	wait_for_completion(&xpc_discovery_exited);
@@ -889,17 +1031,17 @@ xpc_do_exit(enum xp_retval reason)
 
 	/* wait for all partitions to become inactive */
 
-	printmsg_time = jiffies + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
-	xpc_disengage_request_timedout = 0;
+	printmsg_time = jiffies + (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
+	xpc_disengage_timedout = 0;
 
 	do {
 		active_part_count = 0;
 
-		for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+		for (partid = 0; partid < xp_max_npartitions; partid++) {
 			part = &xpc_partitions[partid];
 
 			if (xpc_partition_disengaged(part) &&
-			    part->act_state == XPC_P_INACTIVE) {
+			    part->act_state == XPC_P_AS_INACTIVE) {
 				continue;
 			}
 
@@ -907,36 +1049,32 @@ xpc_do_exit(enum xp_retval reason)
 
 			XPC_DEACTIVATE_PARTITION(part, reason);
 
-			if (part->disengage_request_timeout >
-			    disengage_request_timeout) {
-				disengage_request_timeout =
-				    part->disengage_request_timeout;
-			}
+			if (part->disengage_timeout > disengage_timeout)
+				disengage_timeout = part->disengage_timeout;
 		}
 
-		if (xpc_partition_engaged(-1UL)) {
-			if (time_after(jiffies, printmsg_time)) {
+		if (xpc_any_partition_engaged()) {
+			if (time_is_before_jiffies(printmsg_time)) {
 				dev_info(xpc_part, "waiting for remote "
-					 "partitions to disengage, timeout in "
-					 "%ld seconds\n",
-					 (disengage_request_timeout - jiffies)
-					 / HZ);
+					 "partitions to deactivate, timeout in "
+					 "%ld seconds\n", (disengage_timeout -
+					 jiffies) / HZ);
 				printmsg_time = jiffies +
-				    (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
+				    (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
 				printed_waiting_msg = 1;
 			}
 
 		} else if (active_part_count > 0) {
 			if (printed_waiting_msg) {
 				dev_info(xpc_part, "waiting for local partition"
-					 " to disengage\n");
+					 " to deactivate\n");
 				printed_waiting_msg = 0;
 			}
 
 		} else {
-			if (!xpc_disengage_request_timedout) {
+			if (!xpc_disengage_timedout) {
 				dev_info(xpc_part, "all partitions have "
-					 "disengaged\n");
+					 "deactivated\n");
 			}
 			break;
 		}
@@ -946,33 +1084,28 @@ xpc_do_exit(enum xp_retval reason)
 
 	} while (1);
 
-	DBUG_ON(xpc_partition_engaged(-1UL));
+	DBUG_ON(xpc_any_partition_engaged());
+	DBUG_ON(xpc_any_hbs_allowed() != 0);
 
-	/* indicate to others that our reserved page is uninitialized */
-	xpc_rsvd_page->vars_pa = 0;
-
-	/* now it's time to eliminate our heartbeat */
-	del_timer_sync(&xpc_hb_timer);
-	DBUG_ON(xpc_vars->heartbeating_to_mask != 0);
+	xpc_teardown_rsvd_page();
 
 	if (reason == xpUnloading) {
-		/* take ourselves off of the reboot_notifier_list */
-		(void)unregister_reboot_notifier(&xpc_reboot_notifier);
-
-		/* take ourselves off of the die_notifier list */
 		(void)unregister_die_notifier(&xpc_die_notifier);
+		(void)unregister_reboot_notifier(&xpc_reboot_notifier);
 	}
 
-	/* close down protections for IPI operations */
-	xpc_restrict_IPI_ops();
-
 	/* clear the interface to XPC's functions */
 	xpc_clear_interface();
 
 	if (xpc_sysctl)
 		unregister_sysctl_table(xpc_sysctl);
 
-	kfree(xpc_remote_copy_buffer_base);
+	xpc_teardown_partitions();
+
+	if (is_shub())
+		xpc_exit_sn2();
+	else
+		xpc_exit_uv();
 }
 
 /*
@@ -1002,60 +1135,57 @@ xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
 }
 
 /*
- * Notify other partitions to disengage from all references to our memory.
+ * Notify other partitions to deactivate from us by first disengaging from all
+ * references to our memory.
  */
 static void
-xpc_die_disengage(void)
+xpc_die_deactivate(void)
 {
 	struct xpc_partition *part;
 	short partid;
-	unsigned long engaged;
-	long time, printmsg_time, disengage_request_timeout;
+	int any_engaged;
+	long keep_waiting;
+	long wait_to_print;
 
 	/* keep xpc_hb_checker thread from doing anything (just in case) */
 	xpc_exiting = 1;
 
-	xpc_vars->heartbeating_to_mask = 0;	/* indicate we're deactivated */
+	xpc_disallow_all_hbs();	/*indicate we're deactivated */
 
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+	for (partid = 0; partid < xp_max_npartitions; partid++) {
 		part = &xpc_partitions[partid];
 
-		if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part->
-		    remote_vars_version)) {
-
-			/* just in case it was left set by an earlier XPC */
-			xpc_clear_partition_engaged(1UL << partid);
-			continue;
-		}
-
-		if (xpc_partition_engaged(1UL << partid) ||
-		    part->act_state != XPC_P_INACTIVE) {
-			xpc_request_partition_disengage(part);
-			xpc_mark_partition_disengaged(part);
-			xpc_IPI_send_disengage(part);
+		if (xpc_partition_engaged(partid) ||
+		    part->act_state != XPC_P_AS_INACTIVE) {
+			xpc_request_partition_deactivation(part);
+			xpc_indicate_partition_disengaged(part);
 		}
 	}
 
-	time = rtc_time();
-	printmsg_time = time +
-	    (XPC_DISENGAGE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second);
-	disengage_request_timeout = time +
-	    (xpc_disengage_request_timelimit * sn_rtc_cycles_per_second);
-
-	/* wait for all other partitions to disengage from us */
+	/*
+	 * Though we requested that all other partitions deactivate from us,
+	 * we only wait until they've all disengaged or we've reached the
+	 * defined timelimit.
+	 *
+	 * Given that one iteration through the following while-loop takes
+	 * approximately 200 microseconds, calculate the #of loops to take
+	 * before bailing and the #of loops before printing a waiting message.
+	 */
+	keep_waiting = xpc_disengage_timelimit * 1000 * 5;
+	wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5;
 
 	while (1) {
-		engaged = xpc_partition_engaged(-1UL);
-		if (!engaged) {
-			dev_info(xpc_part, "all partitions have disengaged\n");
+		any_engaged = xpc_any_partition_engaged();
+		if (!any_engaged) {
+			dev_info(xpc_part, "all partitions have deactivated\n");
 			break;
 		}
 
-		time = rtc_time();
-		if (time >= disengage_request_timeout) {
-			for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
-				if (engaged & (1UL << partid)) {
-					dev_info(xpc_part, "disengage from "
+		if (!keep_waiting--) {
+			for (partid = 0; partid < xp_max_npartitions;
+			     partid++) {
+				if (xpc_partition_engaged(partid)) {
+					dev_info(xpc_part, "deactivate from "
 						 "remote partition %d timed "
 						 "out\n", partid);
 				}
@@ -1063,15 +1193,15 @@ xpc_die_disengage(void)
 			break;
 		}
 
-		if (time >= printmsg_time) {
+		if (!wait_to_print--) {
 			dev_info(xpc_part, "waiting for remote partitions to "
-				 "disengage, timeout in %ld seconds\n",
-				 (disengage_request_timeout - time) /
-				 sn_rtc_cycles_per_second);
-			printmsg_time = time +
-			    (XPC_DISENGAGE_PRINTMSG_INTERVAL *
-			     sn_rtc_cycles_per_second);
+				 "deactivate, timeout in %ld seconds\n",
+				 keep_waiting / (1000 * 5));
+			wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL *
+			    1000 * 5;
 		}
+
+		udelay(200);
 	}
 }
 
@@ -1086,10 +1216,11 @@ xpc_die_disengage(void)
 static int
 xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
 {
+#ifdef CONFIG_IA64		/* !!! temporary kludge */
 	switch (event) {
 	case DIE_MACHINE_RESTART:
 	case DIE_MACHINE_HALT:
-		xpc_die_disengage();
+		xpc_die_deactivate();
 		break;
 
 	case DIE_KDEBUG_ENTER:
@@ -1100,8 +1231,7 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
 		/* fall through */
 	case DIE_MCA_MONARCH_ENTER:
 	case DIE_INIT_MONARCH_ENTER:
-		xpc_vars->heartbeat++;
-		xpc_vars->heartbeat_offline = 1;
+		xpc_offline_heartbeat();
 		break;
 
 	case DIE_KDEBUG_LEAVE:
@@ -1112,10 +1242,12 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
 		/* fall through */
 	case DIE_MCA_MONARCH_LEAVE:
 	case DIE_INIT_MONARCH_LEAVE:
-		xpc_vars->heartbeat++;
-		xpc_vars->heartbeat_offline = 0;
+		xpc_online_heartbeat();
 		break;
 	}
+#else
+	xpc_die_deactivate();
+#endif
 
 	return NOTIFY_DONE;
 }
@@ -1124,105 +1256,52 @@ int __init
 xpc_init(void)
 {
 	int ret;
-	short partid;
-	struct xpc_partition *part;
 	struct task_struct *kthread;
-	size_t buf_size;
-
-	if (!ia64_platform_is("sn2"))
-		return -ENODEV;
-
-	buf_size = max(XPC_RP_VARS_SIZE,
-		       XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES);
-	xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size,
-							       GFP_KERNEL,
-						  &xpc_remote_copy_buffer_base);
-	if (xpc_remote_copy_buffer == NULL)
-		return -ENOMEM;
 
 	snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part");
 	snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan");
 
-	xpc_sysctl = register_sysctl_table(xpc_sys_dir);
-
-	/*
-	 * The first few fields of each entry of xpc_partitions[] need to
-	 * be initialized now so that calls to xpc_connect() and
-	 * xpc_disconnect() can be made prior to the activation of any remote
-	 * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE
-	 * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
-	 * PARTITION HAS BEEN ACTIVATED.
-	 */
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
-		part = &xpc_partitions[partid];
-
-		DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part));
-
-		part->act_IRQ_rcvd = 0;
-		spin_lock_init(&part->act_lock);
-		part->act_state = XPC_P_INACTIVE;
-		XPC_SET_REASON(part, 0, 0);
+	if (is_shub()) {
+		/*
+		 * The ia64-sn2 architecture supports at most 64 partitions.
+		 * And the inability to unregister remote amos restricts us
+		 * further to only support exactly 64 partitions on this
+		 * architecture, no less.
+		 */
+		if (xp_max_npartitions != 64) {
+			dev_err(xpc_part, "max #of partitions not set to 64\n");
+			ret = -EINVAL;
+		} else {
+			ret = xpc_init_sn2();
+		}
 
-		init_timer(&part->disengage_request_timer);
-		part->disengage_request_timer.function =
-		    xpc_timeout_partition_disengage_request;
-		part->disengage_request_timer.data = (unsigned long)part;
+	} else if (is_uv()) {
+		ret = xpc_init_uv();
 
-		part->setup_state = XPC_P_UNSET;
-		init_waitqueue_head(&part->teardown_wq);
-		atomic_set(&part->references, 0);
+	} else {
+		ret = -ENODEV;
 	}
 
-	/*
-	 * Open up protections for IPI operations (and AMO operations on
-	 * Shub 1.1 systems).
-	 */
-	xpc_allow_IPI_ops();
-
-	/*
-	 * Interrupts being processed will increment this atomic variable and
-	 * awaken the heartbeat thread which will process the interrupts.
-	 */
-	atomic_set(&xpc_act_IRQ_rcvd, 0);
+	if (ret != 0)
+		return ret;
 
-	/*
-	 * This is safe to do before the xpc_hb_checker thread has started
-	 * because the handler releases a wait queue.  If an interrupt is
-	 * received before the thread is waiting, it will not go to sleep,
-	 * but rather immediately process the interrupt.
-	 */
-	ret = request_irq(SGI_XPC_ACTIVATE, xpc_act_IRQ_handler, 0,
-			  "xpc hb", NULL);
+	ret = xpc_setup_partitions();
 	if (ret != 0) {
-		dev_err(xpc_part, "can't register ACTIVATE IRQ handler, "
-			"errno=%d\n", -ret);
-
-		xpc_restrict_IPI_ops();
-
-		if (xpc_sysctl)
-			unregister_sysctl_table(xpc_sysctl);
-
-		kfree(xpc_remote_copy_buffer_base);
-		return -EBUSY;
+		dev_err(xpc_part, "can't get memory for partition structure\n");
+		goto out_1;
 	}
 
+	xpc_sysctl = register_sysctl_table(xpc_sys_dir);
+
 	/*
 	 * Fill the partition reserved page with the information needed by
 	 * other partitions to discover we are alive and establish initial
 	 * communications.
 	 */
-	xpc_rsvd_page = xpc_rsvd_page_init();
-	if (xpc_rsvd_page == NULL) {
-		dev_err(xpc_part, "could not setup our reserved page\n");
-
-		free_irq(SGI_XPC_ACTIVATE, NULL);
-		xpc_restrict_IPI_ops();
-
-		if (xpc_sysctl)
-			unregister_sysctl_table(xpc_sysctl);
-
-		kfree(xpc_remote_copy_buffer_base);
-		return -EBUSY;
+	ret = xpc_setup_rsvd_page();
+	if (ret != 0) {
+		dev_err(xpc_part, "can't setup our reserved page\n");
+		goto out_2;
 	}
 
 	/* add ourselves to the reboot_notifier_list */
@@ -1235,9 +1314,6 @@ xpc_init(void)
 	if (ret != 0)
 		dev_warn(xpc_part, "can't register die notifier\n");
 
-	init_timer(&xpc_hb_timer);
-	xpc_hb_timer.function = xpc_hb_beater;
-
 	/*
 	 * The real work-horse behind xpc.  This processes incoming
 	 * interrupts and monitors remote heartbeats.
@@ -1245,25 +1321,8 @@ xpc_init(void)
 	kthread = kthread_run(xpc_hb_checker, NULL, XPC_HB_CHECK_THREAD_NAME);
 	if (IS_ERR(kthread)) {
 		dev_err(xpc_part, "failed while forking hb check thread\n");
-
-		/* indicate to others that our reserved page is uninitialized */
-		xpc_rsvd_page->vars_pa = 0;
-
-		/* take ourselves off of the reboot_notifier_list */
-		(void)unregister_reboot_notifier(&xpc_reboot_notifier);
-
-		/* take ourselves off of the die_notifier list */
-		(void)unregister_die_notifier(&xpc_die_notifier);
-
-		del_timer_sync(&xpc_hb_timer);
-		free_irq(SGI_XPC_ACTIVATE, NULL);
-		xpc_restrict_IPI_ops();
-
-		if (xpc_sysctl)
-			unregister_sysctl_table(xpc_sysctl);
-
-		kfree(xpc_remote_copy_buffer_base);
-		return -EBUSY;
+		ret = -EBUSY;
+		goto out_3;
 	}
 
 	/*
@@ -1285,11 +1344,28 @@ xpc_init(void)
 
 	/* set the interface to point at XPC's functions */
 	xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect,
-			  xpc_initiate_allocate, xpc_initiate_send,
-			  xpc_initiate_send_notify, xpc_initiate_received,
-			  xpc_initiate_partid_to_nasids);
+			  xpc_initiate_send, xpc_initiate_send_notify,
+			  xpc_initiate_received, xpc_initiate_partid_to_nasids);
 
 	return 0;
+
+	/* initialization was not successful */
+out_3:
+	xpc_teardown_rsvd_page();
+
+	(void)unregister_die_notifier(&xpc_die_notifier);
+	(void)unregister_reboot_notifier(&xpc_reboot_notifier);
+out_2:
+	if (xpc_sysctl)
+		unregister_sysctl_table(xpc_sysctl);
+
+	xpc_teardown_partitions();
+out_1:
+	if (is_shub())
+		xpc_exit_sn2();
+	else
+		xpc_exit_uv();
+	return ret;
 }
 
 module_init(xpc_init);
@@ -1314,9 +1390,9 @@ module_param(xpc_hb_check_interval, int, 0);
 MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between "
 		 "heartbeat checks.");
 
-module_param(xpc_disengage_request_timelimit, int, 0);
-MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait "
-		 "for disengage request to complete.");
+module_param(xpc_disengage_timelimit, int, 0);
+MODULE_PARM_DESC(xpc_disengage_timelimit, "Number of seconds to wait "
+		 "for disengage to complete.");
 
 module_param(xpc_kdebug_ignore, int, 0);
 MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by "
diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c
index 7dd4b58..6722f6f 100644
--- a/drivers/misc/sgi-xp/xpc_partition.c
+++ b/drivers/misc/sgi-xp/xpc_partition.c
@@ -15,57 +15,22 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/sysctl.h>
-#include <linux/cache.h>
-#include <linux/mmzone.h>
-#include <linux/nodemask.h>
-#include <asm/uncached.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/nodepda.h>
-#include <asm/sn/addrs.h>
+#include <linux/device.h>
+#include <linux/hardirq.h>
 #include "xpc.h"
 
 /* XPC is exiting flag */
 int xpc_exiting;
 
-/* SH_IPI_ACCESS shub register value on startup */
-static u64 xpc_sh1_IPI_access;
-static u64 xpc_sh2_IPI_access0;
-static u64 xpc_sh2_IPI_access1;
-static u64 xpc_sh2_IPI_access2;
-static u64 xpc_sh2_IPI_access3;
-
-/* original protection values for each node */
-u64 xpc_prot_vec[MAX_NUMNODES];
-
 /* this partition's reserved page pointers */
 struct xpc_rsvd_page *xpc_rsvd_page;
-static u64 *xpc_part_nasids;
-static u64 *xpc_mach_nasids;
-struct xpc_vars *xpc_vars;
-struct xpc_vars_part *xpc_vars_part;
+static unsigned long *xpc_part_nasids;
+unsigned long *xpc_mach_nasids;
 
-static int xp_nasid_mask_bytes;	/* actual size in bytes of nasid mask */
-static int xp_nasid_mask_words;	/* actual size in words of nasid mask */
-
-/*
- * For performance reasons, each entry of xpc_partitions[] is cacheline
- * aligned. And xpc_partitions[] is padded with an additional entry at the
- * end so that the last legitimate entry doesn't share its cacheline with
- * another variable.
- */
-struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
+static int xpc_nasid_mask_nbytes;	/* #of bytes in nasid mask */
+int xpc_nasid_mask_nlongs;	/* #of longs in nasid mask */
 
-/*
- * Generic buffer used to store a local copy of portions of a remote
- * partition's reserved page (either its header and part_nasids mask,
- * or its vars).
- */
-char *xpc_remote_copy_buffer;
-void *xpc_remote_copy_buffer_base;
+struct xpc_partition *xpc_partitions;
 
 /*
  * Guarantee that the kmalloc'd memory is cacheline aligned.
@@ -95,56 +60,59 @@ xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
  * Given a nasid, get the physical address of the  partition's reserved page
  * for that nasid. This function returns 0 on any error.
  */
-static u64
+static unsigned long
 xpc_get_rsvd_page_pa(int nasid)
 {
-	bte_result_t bte_res;
-	s64 status;
+	enum xp_retval ret;
 	u64 cookie = 0;
-	u64 rp_pa = nasid;	/* seed with nasid */
-	u64 len = 0;
-	u64 buf = buf;
-	u64 buf_len = 0;
+	unsigned long rp_pa = nasid;	/* seed with nasid */
+	size_t len = 0;
+	size_t buf_len = 0;
+	void *buf = buf;
 	void *buf_base = NULL;
 
 	while (1) {
 
-		status = sn_partition_reserved_page_pa(buf, &cookie, &rp_pa,
-						       &len);
+		/* !!! rp_pa will need to be _gpa on UV.
+		 * ??? So do we save it into the architecture specific parts
+		 * ??? of the xpc_partition structure? Do we rename this
+		 * ??? function or have two versions? Rename rp_pa for UV to
+		 * ??? rp_gpa?
+		 */
+		ret = xpc_get_partition_rsvd_page_pa(buf, &cookie, &rp_pa,
+						     &len);
 
-		dev_dbg(xpc_part, "SAL returned with status=%li, cookie="
-			"0x%016lx, address=0x%016lx, len=0x%016lx\n",
-			status, cookie, rp_pa, len);
+		dev_dbg(xpc_part, "SAL returned with ret=%d, cookie=0x%016lx, "
+			"address=0x%016lx, len=0x%016lx\n", ret,
+			(unsigned long)cookie, rp_pa, len);
 
-		if (status != SALRET_MORE_PASSES)
+		if (ret != xpNeedMoreInfo)
 			break;
 
+		/* !!! L1_CACHE_ALIGN() is only a sn2-bte_copy requirement */
 		if (L1_CACHE_ALIGN(len) > buf_len) {
 			kfree(buf_base);
 			buf_len = L1_CACHE_ALIGN(len);
-			buf = (u64)xpc_kmalloc_cacheline_aligned(buf_len,
-								 GFP_KERNEL,
-								 &buf_base);
+			buf = xpc_kmalloc_cacheline_aligned(buf_len, GFP_KERNEL,
+							    &buf_base);
 			if (buf_base == NULL) {
 				dev_err(xpc_part, "unable to kmalloc "
 					"len=0x%016lx\n", buf_len);
-				status = SALRET_ERROR;
+				ret = xpNoMemory;
 				break;
 			}
 		}
 
-		bte_res = xp_bte_copy(rp_pa, buf, buf_len,
-				      (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-		if (bte_res != BTE_SUCCESS) {
-			dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res);
-			status = SALRET_ERROR;
+		ret = xp_remote_memcpy(xp_pa(buf), rp_pa, buf_len);
+		if (ret != xpSuccess) {
+			dev_dbg(xpc_part, "xp_remote_memcpy failed %d\n", ret);
 			break;
 		}
 	}
 
 	kfree(buf_base);
 
-	if (status != SALRET_OK)
+	if (ret != xpSuccess)
 		rp_pa = 0;
 
 	dev_dbg(xpc_part, "reserved page at phys address 0x%016lx\n", rp_pa);
@@ -156,300 +124,77 @@ xpc_get_rsvd_page_pa(int nasid)
  * other partitions to discover we are alive and establish initial
  * communications.
  */
-struct xpc_rsvd_page *
-xpc_rsvd_page_init(void)
+int
+xpc_setup_rsvd_page(void)
 {
+	int ret;
 	struct xpc_rsvd_page *rp;
-	AMO_t *amos_page;
-	u64 rp_pa, nasid_array = 0;
-	int i, ret;
+	unsigned long rp_pa;
+	unsigned long new_ts_jiffies;
 
 	/* get the local reserved page's address */
 
 	preempt_disable();
-	rp_pa = xpc_get_rsvd_page_pa(cpuid_to_nasid(smp_processor_id()));
+	rp_pa = xpc_get_rsvd_page_pa(xp_cpu_to_nasid(smp_processor_id()));
 	preempt_enable();
 	if (rp_pa == 0) {
 		dev_err(xpc_part, "SAL failed to locate the reserved page\n");
-		return NULL;
+		return -ESRCH;
 	}
 	rp = (struct xpc_rsvd_page *)__va(rp_pa);
 
-	if (rp->partid != sn_partition_id) {
-		dev_err(xpc_part, "the reserved page's partid of %d should be "
-			"%d\n", rp->partid, sn_partition_id);
-		return NULL;
+	if (rp->SAL_version < 3) {
+		/* SAL_versions < 3 had a SAL_partid defined as a u8 */
+		rp->SAL_partid &= 0xff;
+	}
+	BUG_ON(rp->SAL_partid != xp_partition_id);
+
+	if (rp->SAL_partid < 0 || rp->SAL_partid >= xp_max_npartitions) {
+		dev_err(xpc_part, "the reserved page's partid of %d is outside "
+			"supported range (< 0 || >= %d)\n", rp->SAL_partid,
+			xp_max_npartitions);
+		return -EINVAL;
 	}
 
 	rp->version = XPC_RP_VERSION;
+	rp->max_npartitions = xp_max_npartitions;
 
 	/* establish the actual sizes of the nasid masks */
 	if (rp->SAL_version == 1) {
 		/* SAL_version 1 didn't set the nasids_size field */
-		rp->nasids_size = 128;
+		rp->SAL_nasids_size = 128;
 	}
-	xp_nasid_mask_bytes = rp->nasids_size;
-	xp_nasid_mask_words = xp_nasid_mask_bytes / 8;
+	xpc_nasid_mask_nbytes = rp->SAL_nasids_size;
+	xpc_nasid_mask_nlongs = BITS_TO_LONGS(rp->SAL_nasids_size *
+					      BITS_PER_BYTE);
 
 	/* setup the pointers to the various items in the reserved page */
 	xpc_part_nasids = XPC_RP_PART_NASIDS(rp);
 	xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp);
-	xpc_vars = XPC_RP_VARS(rp);
-	xpc_vars_part = XPC_RP_VARS_PART(rp);
-
-	/*
-	 * Before clearing xpc_vars, see if a page of AMOs had been previously
-	 * allocated. If not we'll need to allocate one and set permissions
-	 * so that cross-partition AMOs are allowed.
-	 *
-	 * The allocated AMO page needs MCA reporting to remain disabled after
-	 * XPC has unloaded.  To make this work, we keep a copy of the pointer
-	 * to this page (i.e., amos_page) in the struct xpc_vars structure,
-	 * which is pointed to by the reserved page, and re-use that saved copy
-	 * on subsequent loads of XPC. This AMO page is never freed, and its
-	 * memory protections are never restricted.
-	 */
-	amos_page = xpc_vars->amos_page;
-	if (amos_page == NULL) {
-		amos_page = (AMO_t *)TO_AMO(uncached_alloc_page(0, 1));
-		if (amos_page == NULL) {
-			dev_err(xpc_part, "can't allocate page of AMOs\n");
-			return NULL;
-		}
-
-		/*
-		 * Open up AMO-R/W to cpu.  This is done for Shub 1.1 systems
-		 * when xpc_allow_IPI_ops() is called via xpc_hb_init().
-		 */
-		if (!enable_shub_wars_1_1()) {
-			ret = sn_change_memprotect(ia64_tpa((u64)amos_page),
-						   PAGE_SIZE,
-						   SN_MEMPROT_ACCESS_CLASS_1,
-						   &nasid_array);
-			if (ret != 0) {
-				dev_err(xpc_part, "can't change memory "
-					"protections\n");
-				uncached_free_page(__IA64_UNCACHED_OFFSET |
-						   TO_PHYS((u64)amos_page), 1);
-				return NULL;
-			}
-		}
-	} else if (!IS_AMO_ADDRESS((u64)amos_page)) {
-		/*
-		 * EFI's XPBOOT can also set amos_page in the reserved page,
-		 * but it happens to leave it as an uncached physical address
-		 * and we need it to be an uncached virtual, so we'll have to
-		 * convert it.
-		 */
-		if (!IS_AMO_PHYS_ADDRESS((u64)amos_page)) {
-			dev_err(xpc_part, "previously used amos_page address "
-				"is bad = 0x%p\n", (void *)amos_page);
-			return NULL;
-		}
-		amos_page = (AMO_t *)TO_AMO((u64)amos_page);
-	}
-
-	/* clear xpc_vars */
-	memset(xpc_vars, 0, sizeof(struct xpc_vars));
-
-	xpc_vars->version = XPC_V_VERSION;
-	xpc_vars->act_nasid = cpuid_to_nasid(0);
-	xpc_vars->act_phys_cpuid = cpu_physical_id(0);
-	xpc_vars->vars_part_pa = __pa(xpc_vars_part);
-	xpc_vars->amos_page_pa = ia64_tpa((u64)amos_page);
-	xpc_vars->amos_page = amos_page;	/* save for next load of XPC */
-
-	/* clear xpc_vars_part */
-	memset((u64 *)xpc_vars_part, 0, sizeof(struct xpc_vars_part) *
-	       XP_MAX_PARTITIONS);
-
-	/* initialize the activate IRQ related AMO variables */
-	for (i = 0; i < xp_nasid_mask_words; i++)
-		(void)xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i);
-
-	/* initialize the engaged remote partitions related AMO variables */
-	(void)xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO);
-	(void)xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO);
 
-	/* timestamp of when reserved page was setup by XPC */
-	rp->stamp = CURRENT_TIME;
+	ret = xpc_setup_rsvd_page_sn(rp);
+	if (ret != 0)
+		return ret;
 
 	/*
+	 * Set timestamp of when reserved page was setup by XPC.
 	 * This signifies to the remote partition that our reserved
 	 * page is initialized.
 	 */
-	rp->vars_pa = __pa(xpc_vars);
+	new_ts_jiffies = jiffies;
+	if (new_ts_jiffies == 0 || new_ts_jiffies == rp->ts_jiffies)
+		new_ts_jiffies++;
+	rp->ts_jiffies = new_ts_jiffies;
 
-	return rp;
+	xpc_rsvd_page = rp;
+	return 0;
 }
 
-/*
- * Change protections to allow IPI operations (and AMO operations on
- * Shub 1.1 systems).
- */
 void
-xpc_allow_IPI_ops(void)
+xpc_teardown_rsvd_page(void)
 {
-	int node;
-	int nasid;
-
-	/* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */
-
-	if (is_shub2()) {
-		xpc_sh2_IPI_access0 =
-		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0));
-		xpc_sh2_IPI_access1 =
-		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1));
-		xpc_sh2_IPI_access2 =
-		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2));
-		xpc_sh2_IPI_access3 =
-		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3));
-
-		for_each_online_node(node) {
-			nasid = cnodeid_to_nasid(node);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
-			      -1UL);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
-			      -1UL);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
-			      -1UL);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
-			      -1UL);
-		}
-
-	} else {
-		xpc_sh1_IPI_access =
-		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS));
-
-		for_each_online_node(node) {
-			nasid = cnodeid_to_nasid(node);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
-			      -1UL);
-
-			/*
-			 * Since the BIST collides with memory operations on
-			 * SHUB 1.1 sn_change_memprotect() cannot be used.
-			 */
-			if (enable_shub_wars_1_1()) {
-				/* open up everything */
-				xpc_prot_vec[node] = (u64)HUB_L((u64 *)
-								GLOBAL_MMR_ADDR
-								(nasid,
-						  SH1_MD_DQLP_MMR_DIR_PRIVEC0));
-				HUB_S((u64 *)
-				      GLOBAL_MMR_ADDR(nasid,
-						   SH1_MD_DQLP_MMR_DIR_PRIVEC0),
-				      -1UL);
-				HUB_S((u64 *)
-				      GLOBAL_MMR_ADDR(nasid,
-						   SH1_MD_DQRP_MMR_DIR_PRIVEC0),
-				      -1UL);
-			}
-		}
-	}
-}
-
-/*
- * Restrict protections to disallow IPI operations (and AMO operations on
- * Shub 1.1 systems).
- */
-void
-xpc_restrict_IPI_ops(void)
-{
-	int node;
-	int nasid;
-
-	/* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */
-
-	if (is_shub2()) {
-
-		for_each_online_node(node) {
-			nasid = cnodeid_to_nasid(node);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
-			      xpc_sh2_IPI_access0);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
-			      xpc_sh2_IPI_access1);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
-			      xpc_sh2_IPI_access2);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
-			      xpc_sh2_IPI_access3);
-		}
-
-	} else {
-
-		for_each_online_node(node) {
-			nasid = cnodeid_to_nasid(node);
-			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
-			      xpc_sh1_IPI_access);
-
-			if (enable_shub_wars_1_1()) {
-				HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
-						   SH1_MD_DQLP_MMR_DIR_PRIVEC0),
-				      xpc_prot_vec[node]);
-				HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
-						   SH1_MD_DQRP_MMR_DIR_PRIVEC0),
-				      xpc_prot_vec[node]);
-			}
-		}
-	}
-}
-
-/*
- * At periodic intervals, scan through all active partitions and ensure
- * their heartbeat is still active.  If not, the partition is deactivated.
- */
-void
-xpc_check_remote_hb(void)
-{
-	struct xpc_vars *remote_vars;
-	struct xpc_partition *part;
-	short partid;
-	bte_result_t bres;
-
-	remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer;
-
-	for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
-
-		if (xpc_exiting)
-			break;
-
-		if (partid == sn_partition_id)
-			continue;
-
-		part = &xpc_partitions[partid];
-
-		if (part->act_state == XPC_P_INACTIVE ||
-		    part->act_state == XPC_P_DEACTIVATING) {
-			continue;
-		}
-
-		/* pull the remote_hb cache line */
-		bres = xp_bte_copy(part->remote_vars_pa,
-				   (u64)remote_vars,
-				   XPC_RP_VARS_SIZE,
-				   (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-		if (bres != BTE_SUCCESS) {
-			XPC_DEACTIVATE_PARTITION(part,
-						 xpc_map_bte_errors(bres));
-			continue;
-		}
-
-		dev_dbg(xpc_part, "partid = %d, heartbeat = %ld, last_heartbeat"
-			" = %ld, heartbeat_offline = %ld, HB_mask = 0x%lx\n",
-			partid, remote_vars->heartbeat, part->last_heartbeat,
-			remote_vars->heartbeat_offline,
-			remote_vars->heartbeating_to_mask);
-
-		if (((remote_vars->heartbeat == part->last_heartbeat) &&
-		     (remote_vars->heartbeat_offline == 0)) ||
-		    !xpc_hb_allowed(sn_partition_id, remote_vars)) {
-
-			XPC_DEACTIVATE_PARTITION(part, xpNoHeartbeat);
-			continue;
-		}
-
-		part->last_heartbeat = remote_vars->heartbeat;
-	}
+	/* a zero timestamp indicates our rsvd page is not initialized */
+	xpc_rsvd_page->ts_jiffies = 0;
 }
 
 /*
@@ -459,11 +204,12 @@ xpc_check_remote_hb(void)
  * is large enough to contain a copy of their reserved page header and
  * part_nasids mask.
  */
-static enum xp_retval
-xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
-		  struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa)
+enum xp_retval
+xpc_get_remote_rp(int nasid, unsigned long *discovered_nasids,
+		  struct xpc_rsvd_page *remote_rp, unsigned long *remote_rp_pa)
 {
-	int bres, i;
+	int l;
+	enum xp_retval ret;
 
 	/* get the reserved page's physical address */
 
@@ -472,355 +218,45 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
 		return xpNoRsvdPageAddr;
 
 	/* pull over the reserved page header and part_nasids mask */
-	bres = xp_bte_copy(*remote_rp_pa, (u64)remote_rp,
-			   XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes,
-			   (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-	if (bres != BTE_SUCCESS)
-		return xpc_map_bte_errors(bres);
+	ret = xp_remote_memcpy(xp_pa(remote_rp), *remote_rp_pa,
+			       XPC_RP_HEADER_SIZE + xpc_nasid_mask_nbytes);
+	if (ret != xpSuccess)
+		return ret;
 
 	if (discovered_nasids != NULL) {
-		u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp);
-
-		for (i = 0; i < xp_nasid_mask_words; i++)
-			discovered_nasids[i] |= remote_part_nasids[i];
-	}
-
-	/* check that the partid is for another partition */
+		unsigned long *remote_part_nasids =
+		    XPC_RP_PART_NASIDS(remote_rp);
 
-	if (remote_rp->partid < 1 ||
-	    remote_rp->partid > (XP_MAX_PARTITIONS - 1)) {
-		return xpInvalidPartid;
+		for (l = 0; l < xpc_nasid_mask_nlongs; l++)
+			discovered_nasids[l] |= remote_part_nasids[l];
 	}
 
-	if (remote_rp->partid == sn_partition_id)
-		return xpLocalPartid;
+	/* zero timestamp indicates the reserved page has not been setup */
+	if (remote_rp->ts_jiffies == 0)
+		return xpRsvdPageNotSet;
 
 	if (XPC_VERSION_MAJOR(remote_rp->version) !=
 	    XPC_VERSION_MAJOR(XPC_RP_VERSION)) {
 		return xpBadVersion;
 	}
 
-	return xpSuccess;
-}
-
-/*
- * Get a copy of the remote partition's XPC variables from the reserved page.
- *
- * remote_vars points to a buffer that is cacheline aligned for BTE copies and
- * assumed to be of size XPC_RP_VARS_SIZE.
- */
-static enum xp_retval
-xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
-{
-	int bres;
-
-	if (remote_vars_pa == 0)
-		return xpVarsNotSet;
-
-	/* pull over the cross partition variables */
-	bres = xp_bte_copy(remote_vars_pa, (u64)remote_vars, XPC_RP_VARS_SIZE,
-			   (BTE_NOTIFY | BTE_WACQUIRE), NULL);
-	if (bres != BTE_SUCCESS)
-		return xpc_map_bte_errors(bres);
-
-	if (XPC_VERSION_MAJOR(remote_vars->version) !=
-	    XPC_VERSION_MAJOR(XPC_V_VERSION)) {
-		return xpBadVersion;
-	}
-
-	return xpSuccess;
-}
-
-/*
- * Update the remote partition's info.
- */
-static void
-xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version,
-			  struct timespec *remote_rp_stamp, u64 remote_rp_pa,
-			  u64 remote_vars_pa, struct xpc_vars *remote_vars)
-{
-	part->remote_rp_version = remote_rp_version;
-	dev_dbg(xpc_part, "  remote_rp_version = 0x%016x\n",
-		part->remote_rp_version);
-
-	part->remote_rp_stamp = *remote_rp_stamp;
-	dev_dbg(xpc_part, "  remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n",
-		part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec);
-
-	part->remote_rp_pa = remote_rp_pa;
-	dev_dbg(xpc_part, "  remote_rp_pa = 0x%016lx\n", part->remote_rp_pa);
-
-	part->remote_vars_pa = remote_vars_pa;
-	dev_dbg(xpc_part, "  remote_vars_pa = 0x%016lx\n",
-		part->remote_vars_pa);
-
-	part->last_heartbeat = remote_vars->heartbeat;
-	dev_dbg(xpc_part, "  last_heartbeat = 0x%016lx\n",
-		part->last_heartbeat);
-
-	part->remote_vars_part_pa = remote_vars->vars_part_pa;
-	dev_dbg(xpc_part, "  remote_vars_part_pa = 0x%016lx\n",
-		part->remote_vars_part_pa);
-
-	part->remote_act_nasid = remote_vars->act_nasid;
-	dev_dbg(xpc_part, "  remote_act_nasid = 0x%x\n",
-		part->remote_act_nasid);
-
-	part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid;
-	dev_dbg(xpc_part, "  remote_act_phys_cpuid = 0x%x\n",
-		part->remote_act_phys_cpuid);
-
-	part->remote_amos_page_pa = remote_vars->amos_page_pa;
-	dev_dbg(xpc_part, "  remote_amos_page_pa = 0x%lx\n",
-		part->remote_amos_page_pa);
-
-	part->remote_vars_version = remote_vars->version;
-	dev_dbg(xpc_part, "  remote_vars_version = 0x%x\n",
-		part->remote_vars_version);
-}
-
-/*
- * Prior code has determined the nasid which generated an IPI.  Inspect
- * that nasid to determine if its partition needs to be activated or
- * deactivated.
- *
- * A partition is consider "awaiting activation" if our partition
- * flags indicate it is not active and it has a heartbeat.  A
- * partition is considered "awaiting deactivation" if our partition
- * flags indicate it is active but it has no heartbeat or it is not
- * sending its heartbeat to us.
- *
- * To determine the heartbeat, the remote nasid must have a properly
- * initialized reserved page.
- */
-static void
-xpc_identify_act_IRQ_req(int nasid)
-{
-	struct xpc_rsvd_page *remote_rp;
-	struct xpc_vars *remote_vars;
-	u64 remote_rp_pa;
-	u64 remote_vars_pa;
-	int remote_rp_version;
-	int reactivate = 0;
-	int stamp_diff;
-	struct timespec remote_rp_stamp = { 0, 0 };
-	short partid;
-	struct xpc_partition *part;
-	enum xp_retval ret;
-
-	/* pull over the reserved page structure */
-
-	remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer;
-
-	ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
-	if (ret != xpSuccess) {
-		dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
-			 "which sent interrupt, reason=%d\n", nasid, ret);
-		return;
-	}
-
-	remote_vars_pa = remote_rp->vars_pa;
-	remote_rp_version = remote_rp->version;
-	if (XPC_SUPPORTS_RP_STAMP(remote_rp_version))
-		remote_rp_stamp = remote_rp->stamp;
-
-	partid = remote_rp->partid;
-	part = &xpc_partitions[partid];
-
-	/* pull over the cross partition variables */
-
-	remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer;
-
-	ret = xpc_get_remote_vars(remote_vars_pa, remote_vars);
-	if (ret != xpSuccess) {
-
-		dev_warn(xpc_part, "unable to get XPC variables from nasid %d, "
-			 "which sent interrupt, reason=%d\n", nasid, ret);
-
-		XPC_DEACTIVATE_PARTITION(part, ret);
-		return;
-	}
-
-	part->act_IRQ_rcvd++;
-
-	dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = "
-		"%ld:0x%lx\n", (int)nasid, (int)partid, part->act_IRQ_rcvd,
-		remote_vars->heartbeat, remote_vars->heartbeating_to_mask);
-
-	if (xpc_partition_disengaged(part) &&
-	    part->act_state == XPC_P_INACTIVE) {
-
-		xpc_update_partition_info(part, remote_rp_version,
-					  &remote_rp_stamp, remote_rp_pa,
-					  remote_vars_pa, remote_vars);
-
-		if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
-			if (xpc_partition_disengage_requested(1UL << partid)) {
-				/*
-				 * Other side is waiting on us to disengage,
-				 * even though we already have.
-				 */
-				return;
-			}
-		} else {
-			/* other side doesn't support disengage requests */
-			xpc_clear_partition_disengage_request(1UL << partid);
-		}
-
-		xpc_activate_partition(part);
-		return;
-	}
-
-	DBUG_ON(part->remote_rp_version == 0);
-	DBUG_ON(part->remote_vars_version == 0);
-
-	if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) {
-		DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part->
-						       remote_vars_version));
-
-		if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
-			DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
-							       version));
-			/* see if the other side rebooted */
-			if (part->remote_amos_page_pa ==
-			    remote_vars->amos_page_pa &&
-			    xpc_hb_allowed(sn_partition_id, remote_vars)) {
-				/* doesn't look that way, so ignore the IPI */
-				return;
-			}
-		}
-
-		/*
-		 * Other side rebooted and previous XPC didn't support the
-		 * disengage request, so we don't need to do anything special.
-		 */
-
-		xpc_update_partition_info(part, remote_rp_version,
-					  &remote_rp_stamp, remote_rp_pa,
-					  remote_vars_pa, remote_vars);
-		part->reactivate_nasid = nasid;
-		XPC_DEACTIVATE_PARTITION(part, xpReactivating);
-		return;
-	}
-
-	DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version));
-
-	if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) {
-		DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
-
-		/*
-		 * Other side rebooted and previous XPC did support the
-		 * disengage request, but the new one doesn't.
-		 */
-
-		xpc_clear_partition_engaged(1UL << partid);
-		xpc_clear_partition_disengage_request(1UL << partid);
-
-		xpc_update_partition_info(part, remote_rp_version,
-					  &remote_rp_stamp, remote_rp_pa,
-					  remote_vars_pa, remote_vars);
-		reactivate = 1;
-
-	} else {
-		DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version));
-
-		stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp,
-						&remote_rp_stamp);
-		if (stamp_diff != 0) {
-			DBUG_ON(stamp_diff >= 0);
-
-			/*
-			 * Other side rebooted and the previous XPC did support
-			 * the disengage request, as does the new one.
-			 */
-
-			DBUG_ON(xpc_partition_engaged(1UL << partid));
-			DBUG_ON(xpc_partition_disengage_requested(1UL <<
-								  partid));
-
-			xpc_update_partition_info(part, remote_rp_version,
-						  &remote_rp_stamp,
-						  remote_rp_pa, remote_vars_pa,
-						  remote_vars);
-			reactivate = 1;
-		}
-	}
-
-	if (part->disengage_request_timeout > 0 &&
-	    !xpc_partition_disengaged(part)) {
-		/* still waiting on other side to disengage from us */
-		return;
-	}
-
-	if (reactivate) {
-		part->reactivate_nasid = nasid;
-		XPC_DEACTIVATE_PARTITION(part, xpReactivating);
-
-	} else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) &&
-		   xpc_partition_disengage_requested(1UL << partid)) {
-		XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown);
+	/* check that both remote and local partids are valid for each side */
+	if (remote_rp->SAL_partid < 0 ||
+	    remote_rp->SAL_partid >= xp_max_npartitions ||
+	    remote_rp->max_npartitions <= xp_partition_id) {
+		return xpInvalidPartid;
 	}
-}
 
-/*
- * Loop through the activation AMO variables and process any bits
- * which are set.  Each bit indicates a nasid sending a partition
- * activation or deactivation request.
- *
- * Return #of IRQs detected.
- */
-int
-xpc_identify_act_IRQ_sender(void)
-{
-	int word, bit;
-	u64 nasid_mask;
-	u64 nasid;		/* remote nasid */
-	int n_IRQs_detected = 0;
-	AMO_t *act_amos;
-
-	act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS;
-
-	/* scan through act AMO variable looking for non-zero entries */
-	for (word = 0; word < xp_nasid_mask_words; word++) {
-
-		if (xpc_exiting)
-			break;
-
-		nasid_mask = xpc_IPI_receive(&act_amos[word]);
-		if (nasid_mask == 0) {
-			/* no IRQs from nasids in this variable */
-			continue;
-		}
-
-		dev_dbg(xpc_part, "AMO[%d] gave back 0x%lx\n", word,
-			nasid_mask);
-
-		/*
-		 * If this nasid has been added to the machine since
-		 * our partition was reset, this will retain the
-		 * remote nasid in our reserved pages machine mask.
-		 * This is used in the event of module reload.
-		 */
-		xpc_mach_nasids[word] |= nasid_mask;
-
-		/* locate the nasid(s) which sent interrupts */
+	if (remote_rp->SAL_partid == xp_partition_id)
+		return xpLocalPartid;
 
-		for (bit = 0; bit < (8 * sizeof(u64)); bit++) {
-			if (nasid_mask & (1UL << bit)) {
-				n_IRQs_detected++;
-				nasid = XPC_NASID_FROM_W_B(word, bit);
-				dev_dbg(xpc_part, "interrupt from nasid %ld\n",
-					nasid);
-				xpc_identify_act_IRQ_req(nasid);
-			}
-		}
-	}
-	return n_IRQs_detected;
+	return xpSuccess;
 }
 
 /*
- * See if the other side has responded to a partition disengage request
- * from us.
+ * See if the other side has responded to a partition deactivate request
+ * from us. Though we requested the remote partition to deactivate with regard
+ * to us, we really only need to wait for the other side to disengage from us.
  */
 int
 xpc_partition_disengaged(struct xpc_partition *part)
@@ -828,41 +264,37 @@ xpc_partition_disengaged(struct xpc_partition *part)
 	short partid = XPC_PARTID(part);
 	int disengaged;
 
-	disengaged = (xpc_partition_engaged(1UL << partid) == 0);
-	if (part->disengage_request_timeout) {
+	disengaged = !xpc_partition_engaged(partid);
+	if (part->disengage_timeout) {
 		if (!disengaged) {
-			if (time_before(jiffies,
-			    part->disengage_request_timeout)) {
+			if (time_is_after_jiffies(part->disengage_timeout)) {
 				/* timelimit hasn't been reached yet */
 				return 0;
 			}
 
 			/*
-			 * Other side hasn't responded to our disengage
+			 * Other side hasn't responded to our deactivate
 			 * request in a timely fashion, so assume it's dead.
 			 */
 
-			dev_info(xpc_part, "disengage from remote partition %d "
-				 "timed out\n", partid);
-			xpc_disengage_request_timedout = 1;
-			xpc_clear_partition_engaged(1UL << partid);
+			dev_info(xpc_part, "deactivate request to remote "
+				 "partition %d timed out\n", partid);
+			xpc_disengage_timedout = 1;
+			xpc_assume_partition_disengaged(partid);
 			disengaged = 1;
 		}
-		part->disengage_request_timeout = 0;
+		part->disengage_timeout = 0;
 
 		/* cancel the timer function, provided it's not us */
-		if (!in_interrupt()) {
-			del_singleshot_timer_sync(&part->
-						  disengage_request_timer);
-		}
+		if (!in_interrupt())
+			del_singleshot_timer_sync(&part->disengage_timer);
 
-		DBUG_ON(part->act_state != XPC_P_DEACTIVATING &&
-			part->act_state != XPC_P_INACTIVE);
-		if (part->act_state != XPC_P_INACTIVE)
+		DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING &&
+			part->act_state != XPC_P_AS_INACTIVE);
+		if (part->act_state != XPC_P_AS_INACTIVE)
 			xpc_wakeup_channel_mgr(part);
 
-		if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version))
-			xpc_cancel_partition_disengage_request(part);
+		xpc_cancel_partition_deactivation_request(part);
 	}
 	return disengaged;
 }
@@ -879,8 +311,8 @@ xpc_mark_partition_active(struct xpc_partition *part)
 	dev_dbg(xpc_part, "setting partition %d to ACTIVE\n", XPC_PARTID(part));
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
-	if (part->act_state == XPC_P_ACTIVATING) {
-		part->act_state = XPC_P_ACTIVE;
+	if (part->act_state == XPC_P_AS_ACTIVATING) {
+		part->act_state = XPC_P_AS_ACTIVE;
 		ret = xpSuccess;
 	} else {
 		DBUG_ON(part->reason == xpSuccess);
@@ -892,7 +324,7 @@ xpc_mark_partition_active(struct xpc_partition *part)
 }
 
 /*
- * Notify XPC that the partition is down.
+ * Start the process of deactivating the specified partition.
  */
 void
 xpc_deactivate_partition(const int line, struct xpc_partition *part,
@@ -902,16 +334,16 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
 
-	if (part->act_state == XPC_P_INACTIVE) {
+	if (part->act_state == XPC_P_AS_INACTIVE) {
 		XPC_SET_REASON(part, reason, line);
 		spin_unlock_irqrestore(&part->act_lock, irq_flags);
 		if (reason == xpReactivating) {
 			/* we interrupt ourselves to reactivate partition */
-			xpc_IPI_send_reactivate(part);
+			xpc_request_partition_reactivation(part);
 		}
 		return;
 	}
-	if (part->act_state == XPC_P_DEACTIVATING) {
+	if (part->act_state == XPC_P_AS_DEACTIVATING) {
 		if ((part->reason == xpUnloading && reason != xpUnloading) ||
 		    reason == xpReactivating) {
 			XPC_SET_REASON(part, reason, line);
@@ -920,22 +352,18 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part,
 		return;
 	}
 
-	part->act_state = XPC_P_DEACTIVATING;
+	part->act_state = XPC_P_AS_DEACTIVATING;
 	XPC_SET_REASON(part, reason, line);
 
 	spin_unlock_irqrestore(&part->act_lock, irq_flags);
 
-	if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) {
-		xpc_request_partition_disengage(part);
-		xpc_IPI_send_disengage(part);
+	/* ask remote partition to deactivate with regard to us */
+	xpc_request_partition_deactivation(part);
 
-		/* set a timelimit on the disengage request */
-		part->disengage_request_timeout = jiffies +
-		    (xpc_disengage_request_timelimit * HZ);
-		part->disengage_request_timer.expires =
-		    part->disengage_request_timeout;
-		add_timer(&part->disengage_request_timer);
-	}
+	/* set a timelimit on the disengage phase of the deactivation request */
+	part->disengage_timeout = jiffies + (xpc_disengage_timelimit * HZ);
+	part->disengage_timer.expires = part->disengage_timeout;
+	add_timer(&part->disengage_timer);
 
 	dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n",
 		XPC_PARTID(part), reason);
@@ -955,7 +383,7 @@ xpc_mark_partition_inactive(struct xpc_partition *part)
 		XPC_PARTID(part));
 
 	spin_lock_irqsave(&part->act_lock, irq_flags);
-	part->act_state = XPC_P_INACTIVE;
+	part->act_state = XPC_P_AS_INACTIVE;
 	spin_unlock_irqrestore(&part->act_lock, irq_flags);
 	part->remote_rp_pa = 0;
 }
@@ -974,28 +402,22 @@ xpc_discovery(void)
 {
 	void *remote_rp_base;
 	struct xpc_rsvd_page *remote_rp;
-	struct xpc_vars *remote_vars;
-	u64 remote_rp_pa;
-	u64 remote_vars_pa;
+	unsigned long remote_rp_pa;
 	int region;
 	int region_size;
 	int max_regions;
 	int nasid;
 	struct xpc_rsvd_page *rp;
-	short partid;
-	struct xpc_partition *part;
-	u64 *discovered_nasids;
+	unsigned long *discovered_nasids;
 	enum xp_retval ret;
 
 	remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE +
-						  xp_nasid_mask_bytes,
+						  xpc_nasid_mask_nbytes,
 						  GFP_KERNEL, &remote_rp_base);
 	if (remote_rp == NULL)
 		return;
 
-	remote_vars = (struct xpc_vars *)remote_rp;
-
-	discovered_nasids = kzalloc(sizeof(u64) * xp_nasid_mask_words,
+	discovered_nasids = kzalloc(sizeof(long) * xpc_nasid_mask_nlongs,
 				    GFP_KERNEL);
 	if (discovered_nasids == NULL) {
 		kfree(remote_rp_base);
@@ -1010,7 +432,7 @@ xpc_discovery(void)
 	 * protection is in regards to memory, IOI and IPI.
 	 */
 	max_regions = 64;
-	region_size = sn_region_size;
+	region_size = xp_region_size;
 
 	switch (region_size) {
 	case 128:
@@ -1038,28 +460,28 @@ xpc_discovery(void)
 
 			dev_dbg(xpc_part, "checking nasid %d\n", nasid);
 
-			if (XPC_NASID_IN_ARRAY(nasid, xpc_part_nasids)) {
+			if (test_bit(nasid / 2, xpc_part_nasids)) {
 				dev_dbg(xpc_part, "PROM indicates Nasid %d is "
 					"part of the local partition; skipping "
 					"region\n", nasid);
 				break;
 			}
 
-			if (!(XPC_NASID_IN_ARRAY(nasid, xpc_mach_nasids))) {
+			if (!(test_bit(nasid / 2, xpc_mach_nasids))) {
 				dev_dbg(xpc_part, "PROM indicates Nasid %d was "
 					"not on Numa-Link network at reset\n",
 					nasid);
 				continue;
 			}
 
-			if (XPC_NASID_IN_ARRAY(nasid, discovered_nasids)) {
+			if (test_bit(nasid / 2, discovered_nasids)) {
 				dev_dbg(xpc_part, "Nasid %d is part of a "
 					"partition which was previously "
 					"discovered\n", nasid);
 				continue;
 			}
 
-			/* pull over the reserved page structure */
+			/* pull over the rsvd page header & part_nasids mask */
 
 			ret = xpc_get_remote_rp(nasid, discovered_nasids,
 						remote_rp, &remote_rp_pa);
@@ -1074,72 +496,8 @@ xpc_discovery(void)
 				continue;
 			}
 
-			remote_vars_pa = remote_rp->vars_pa;
-
-			partid = remote_rp->partid;
-			part = &xpc_partitions[partid];
-
-			/* pull over the cross partition variables */
-
-			ret = xpc_get_remote_vars(remote_vars_pa, remote_vars);
-			if (ret != xpSuccess) {
-				dev_dbg(xpc_part, "unable to get XPC variables "
-					"from nasid %d, reason=%d\n", nasid,
-					ret);
-
-				XPC_DEACTIVATE_PARTITION(part, ret);
-				continue;
-			}
-
-			if (part->act_state != XPC_P_INACTIVE) {
-				dev_dbg(xpc_part, "partition %d on nasid %d is "
-					"already activating\n", partid, nasid);
-				break;
-			}
-
-			/*
-			 * Register the remote partition's AMOs with SAL so it
-			 * can handle and cleanup errors within that address
-			 * range should the remote partition go down. We don't
-			 * unregister this range because it is difficult to
-			 * tell when outstanding writes to the remote partition
-			 * are finished and thus when it is thus safe to
-			 * unregister. This should not result in wasted space
-			 * in the SAL xp_addr_region table because we should
-			 * get the same page for remote_act_amos_pa after
-			 * module reloads and system reboots.
-			 */
-			if (sn_register_xp_addr_region
-			    (remote_vars->amos_page_pa, PAGE_SIZE, 1) < 0) {
-				dev_dbg(xpc_part,
-					"partition %d failed to "
-					"register xp_addr region 0x%016lx\n",
-					partid, remote_vars->amos_page_pa);
-
-				XPC_SET_REASON(part, xpPhysAddrRegFailed,
-					       __LINE__);
-				break;
-			}
-
-			/*
-			 * The remote nasid is valid and available.
-			 * Send an interrupt to that nasid to notify
-			 * it that we are ready to begin activation.
-			 */
-			dev_dbg(xpc_part, "sending an interrupt to AMO 0x%lx, "
-				"nasid %d, phys_cpuid 0x%x\n",
-				remote_vars->amos_page_pa,
-				remote_vars->act_nasid,
-				remote_vars->act_phys_cpuid);
-
-			if (XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->
-							   version)) {
-				part->remote_amos_page_pa =
-				    remote_vars->amos_page_pa;
-				xpc_mark_partition_disengaged(part);
-				xpc_cancel_partition_disengage_request(part);
-			}
-			xpc_IPI_send_activate(remote_vars);
+			xpc_request_partition_activation(remote_rp,
+							 remote_rp_pa, nasid);
 		}
 	}
 
@@ -1155,20 +513,16 @@ enum xp_retval
 xpc_initiate_partid_to_nasids(short partid, void *nasid_mask)
 {
 	struct xpc_partition *part;
-	u64 part_nasid_pa;
-	int bte_res;
+	unsigned long part_nasid_pa;
 
 	part = &xpc_partitions[partid];
 	if (part->remote_rp_pa == 0)
 		return xpPartitionDown;
 
-	memset(nasid_mask, 0, XP_NASID_MASK_BYTES);
-
-	part_nasid_pa = (u64)XPC_RP_PART_NASIDS(part->remote_rp_pa);
+	memset(nasid_mask, 0, xpc_nasid_mask_nbytes);
 
-	bte_res = xp_bte_copy(part_nasid_pa, (u64)nasid_mask,
-			      xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE),
-			      NULL);
+	part_nasid_pa = (unsigned long)XPC_RP_PART_NASIDS(part->remote_rp_pa);
 
-	return xpc_map_bte_errors(bte_res);
+	return xp_remote_memcpy(xp_pa(nasid_mask), part_nasid_pa,
+				xpc_nasid_mask_nbytes);
 }
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
new file mode 100644
index 0000000..b4882cc
--- /dev/null
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -0,0 +1,2404 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+/*
+ * Cross Partition Communication (XPC) sn2-based functions.
+ *
+ *     Architecture specific implementation of common functions.
+ *
+ */
+
+#include <linux/delay.h>
+#include <asm/uncached.h>
+#include <asm/sn/mspec.h>
+#include <asm/sn/sn_sal.h>
+#include "xpc.h"
+
+/*
+ * Define the number of u64s required to represent all the C-brick nasids
+ * as a bitmap.  The cross-partition kernel modules deal only with
+ * C-brick nasids, thus the need for bitmaps which don't account for
+ * odd-numbered (non C-brick) nasids.
+ */
+#define XPC_MAX_PHYSNODES_SN2	(MAX_NUMALINK_NODES / 2)
+#define XP_NASID_MASK_BYTES_SN2	((XPC_MAX_PHYSNODES_SN2 + 7) / 8)
+#define XP_NASID_MASK_WORDS_SN2	((XPC_MAX_PHYSNODES_SN2 + 63) / 64)
+
+/*
+ * Memory for XPC's amo variables is allocated by the MSPEC driver. These
+ * pages are located in the lowest granule. The lowest granule uses 4k pages
+ * for cached references and an alternate TLB handler to never provide a
+ * cacheable mapping for the entire region. This will prevent speculative
+ * reading of cached copies of our lines from being issued which will cause
+ * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
+ * amo variables (based on XP_MAX_NPARTITIONS_SN2) to identify the senders of
+ * NOTIFY IRQs, 128 amo variables (based on XP_NASID_MASK_WORDS_SN2) to identify
+ * the senders of ACTIVATE IRQs, 1 amo variable to identify which remote
+ * partitions (i.e., XPCs) consider themselves currently engaged with the
+ * local XPC and 1 amo variable to request partition deactivation.
+ */
+#define XPC_NOTIFY_IRQ_AMOS_SN2		0
+#define XPC_ACTIVATE_IRQ_AMOS_SN2	(XPC_NOTIFY_IRQ_AMOS_SN2 + \
+					 XP_MAX_NPARTITIONS_SN2)
+#define XPC_ENGAGED_PARTITIONS_AMO_SN2	(XPC_ACTIVATE_IRQ_AMOS_SN2 + \
+					 XP_NASID_MASK_WORDS_SN2)
+#define XPC_DEACTIVATE_REQUEST_AMO_SN2	(XPC_ENGAGED_PARTITIONS_AMO_SN2 + 1)
+
+/*
+ * Buffer used to store a local copy of portions of a remote partition's
+ * reserved page (either its header and part_nasids mask, or its vars).
+ */
+static void *xpc_remote_copy_buffer_base_sn2;
+static char *xpc_remote_copy_buffer_sn2;
+
+static struct xpc_vars_sn2 *xpc_vars_sn2;
+static struct xpc_vars_part_sn2 *xpc_vars_part_sn2;
+
+static int
+xpc_setup_partitions_sn_sn2(void)
+{
+	/* nothing needs to be done */
+	return 0;
+}
+
+/* SH_IPI_ACCESS shub register value on startup */
+static u64 xpc_sh1_IPI_access_sn2;
+static u64 xpc_sh2_IPI_access0_sn2;
+static u64 xpc_sh2_IPI_access1_sn2;
+static u64 xpc_sh2_IPI_access2_sn2;
+static u64 xpc_sh2_IPI_access3_sn2;
+
+/*
+ * Change protections to allow IPI operations.
+ */
+static void
+xpc_allow_IPI_ops_sn2(void)
+{
+	int node;
+	int nasid;
+
+	/* !!! The following should get moved into SAL. */
+	if (is_shub2()) {
+		xpc_sh2_IPI_access0_sn2 =
+		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0));
+		xpc_sh2_IPI_access1_sn2 =
+		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1));
+		xpc_sh2_IPI_access2_sn2 =
+		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2));
+		xpc_sh2_IPI_access3_sn2 =
+		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3));
+
+		for_each_online_node(node) {
+			nasid = cnodeid_to_nasid(node);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
+			      -1UL);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
+			      -1UL);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
+			      -1UL);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
+			      -1UL);
+		}
+	} else {
+		xpc_sh1_IPI_access_sn2 =
+		    (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS));
+
+		for_each_online_node(node) {
+			nasid = cnodeid_to_nasid(node);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
+			      -1UL);
+		}
+	}
+}
+
+/*
+ * Restrict protections to disallow IPI operations.
+ */
+static void
+xpc_disallow_IPI_ops_sn2(void)
+{
+	int node;
+	int nasid;
+
+	/* !!! The following should get moved into SAL. */
+	if (is_shub2()) {
+		for_each_online_node(node) {
+			nasid = cnodeid_to_nasid(node);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0),
+			      xpc_sh2_IPI_access0_sn2);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1),
+			      xpc_sh2_IPI_access1_sn2);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2),
+			      xpc_sh2_IPI_access2_sn2);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3),
+			      xpc_sh2_IPI_access3_sn2);
+		}
+	} else {
+		for_each_online_node(node) {
+			nasid = cnodeid_to_nasid(node);
+			HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS),
+			      xpc_sh1_IPI_access_sn2);
+		}
+	}
+}
+
+/*
+ * The following set of functions are used for the sending and receiving of
+ * IRQs (also known as IPIs). There are two flavors of IRQs, one that is
+ * associated with partition activity (SGI_XPC_ACTIVATE) and the other that
+ * is associated with channel activity (SGI_XPC_NOTIFY).
+ */
+
+static u64
+xpc_receive_IRQ_amo_sn2(struct amo *amo)
+{
+	return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR);
+}
+
+static enum xp_retval
+xpc_send_IRQ_sn2(struct amo *amo, u64 flag, int nasid, int phys_cpuid,
+		 int vector)
+{
+	int ret = 0;
+	unsigned long irq_flags;
+
+	local_irq_save(irq_flags);
+
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, flag);
+	sn_send_IPI_phys(nasid, phys_cpuid, vector, 0);
+
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IRQs and amos to it until the heartbeat times out.
+	 */
+	ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable),
+						     xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+
+	return (ret == 0) ? xpSuccess : xpPioReadError;
+}
+
+static struct amo *
+xpc_init_IRQ_amo_sn2(int index)
+{
+	struct amo *amo = xpc_vars_sn2->amos_page + index;
+
+	(void)xpc_receive_IRQ_amo_sn2(amo);	/* clear amo variable */
+	return amo;
+}
+
+/*
+ * Functions associated with SGI_XPC_ACTIVATE IRQ.
+ */
+
+/*
+ * Notify the heartbeat check thread that an activate IRQ has been received.
+ */
+static irqreturn_t
+xpc_handle_activate_IRQ_sn2(int irq, void *dev_id)
+{
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+	xpc_activate_IRQ_rcvd++;
+	spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+	wake_up_interruptible(&xpc_activate_IRQ_wq);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Flag the appropriate amo variable and send an IRQ to the specified node.
+ */
+static void
+xpc_send_activate_IRQ_sn2(unsigned long amos_page_pa, int from_nasid,
+			  int to_nasid, int to_phys_cpuid)
+{
+	struct amo *amos = (struct amo *)__va(amos_page_pa +
+					      (XPC_ACTIVATE_IRQ_AMOS_SN2 *
+					      sizeof(struct amo)));
+
+	(void)xpc_send_IRQ_sn2(&amos[BIT_WORD(from_nasid / 2)],
+			       BIT_MASK(from_nasid / 2), to_nasid,
+			       to_phys_cpuid, SGI_XPC_ACTIVATE);
+}
+
+static void
+xpc_send_local_activate_IRQ_sn2(int from_nasid)
+{
+	unsigned long irq_flags;
+	struct amo *amos = (struct amo *)__va(xpc_vars_sn2->amos_page_pa +
+					      (XPC_ACTIVATE_IRQ_AMOS_SN2 *
+					      sizeof(struct amo)));
+
+	/* fake the sending and receipt of an activate IRQ from remote nasid */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amos[BIT_WORD(from_nasid / 2)].variable),
+			 FETCHOP_OR, BIT_MASK(from_nasid / 2));
+
+	spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+	xpc_activate_IRQ_rcvd++;
+	spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+	wake_up_interruptible(&xpc_activate_IRQ_wq);
+}
+
+/*
+ * Functions associated with SGI_XPC_NOTIFY IRQ.
+ */
+
+/*
+ * Check to see if any chctl flags were sent from the specified partition.
+ */
+static void
+xpc_check_for_sent_chctl_flags_sn2(struct xpc_partition *part)
+{
+	union xpc_channel_ctl_flags chctl;
+	unsigned long irq_flags;
+
+	chctl.all_flags = xpc_receive_IRQ_amo_sn2(part->sn.sn2.
+						  local_chctl_amo_va);
+	if (chctl.all_flags == 0)
+		return;
+
+	spin_lock_irqsave(&part->chctl_lock, irq_flags);
+	part->chctl.all_flags |= chctl.all_flags;
+	spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+	dev_dbg(xpc_chan, "received notify IRQ from partid=%d, chctl.all_flags="
+		"0x%lx\n", XPC_PARTID(part), chctl.all_flags);
+
+	xpc_wakeup_channel_mgr(part);
+}
+
+/*
+ * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified
+ * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more
+ * than one partition, we use an amo structure per partition to indicate
+ * whether a partition has sent an IRQ or not.  If it has, then wake up the
+ * associated kthread to handle it.
+ *
+ * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IRQs sent by XPC
+ * running on other partitions.
+ *
+ * Noteworthy Arguments:
+ *
+ *	irq - Interrupt ReQuest number. NOT USED.
+ *
+ *	dev_id - partid of IRQ's potential sender.
+ */
+static irqreturn_t
+xpc_handle_notify_IRQ_sn2(int irq, void *dev_id)
+{
+	short partid = (short)(u64)dev_id;
+	struct xpc_partition *part = &xpc_partitions[partid];
+
+	DBUG_ON(partid < 0 || partid >= XP_MAX_NPARTITIONS_SN2);
+
+	if (xpc_part_ref(part)) {
+		xpc_check_for_sent_chctl_flags_sn2(part);
+
+		xpc_part_deref(part);
+	}
+	return IRQ_HANDLED;
+}
+
+/*
+ * Check to see if xpc_handle_notify_IRQ_sn2() dropped any IRQs on the floor
+ * because the write to their associated amo variable completed after the IRQ
+ * was received.
+ */
+static void
+xpc_check_for_dropped_notify_IRQ_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+
+	if (xpc_part_ref(part)) {
+		xpc_check_for_sent_chctl_flags_sn2(part);
+
+		part_sn2->dropped_notify_IRQ_timer.expires = jiffies +
+		    XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL;
+		add_timer(&part_sn2->dropped_notify_IRQ_timer);
+		xpc_part_deref(part);
+	}
+}
+
+/*
+ * Send a notify IRQ to the remote partition that is associated with the
+ * specified channel.
+ */
+static void
+xpc_send_notify_IRQ_sn2(struct xpc_channel *ch, u8 chctl_flag,
+			char *chctl_flag_string, unsigned long *irq_flags)
+{
+	struct xpc_partition *part = &xpc_partitions[ch->partid];
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	union xpc_channel_ctl_flags chctl = { 0 };
+	enum xp_retval ret;
+
+	if (likely(part->act_state != XPC_P_AS_DEACTIVATING)) {
+		chctl.flags[ch->number] = chctl_flag;
+		ret = xpc_send_IRQ_sn2(part_sn2->remote_chctl_amo_va,
+				       chctl.all_flags,
+				       part_sn2->notify_IRQ_nasid,
+				       part_sn2->notify_IRQ_phys_cpuid,
+				       SGI_XPC_NOTIFY);
+		dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n",
+			chctl_flag_string, ch->partid, ch->number, ret);
+		if (unlikely(ret != xpSuccess)) {
+			if (irq_flags != NULL)
+				spin_unlock_irqrestore(&ch->lock, *irq_flags);
+			XPC_DEACTIVATE_PARTITION(part, ret);
+			if (irq_flags != NULL)
+				spin_lock_irqsave(&ch->lock, *irq_flags);
+		}
+	}
+}
+
+#define XPC_SEND_NOTIFY_IRQ_SN2(_ch, _ipi_f, _irq_f) \
+		xpc_send_notify_IRQ_sn2(_ch, _ipi_f, #_ipi_f, _irq_f)
+
+/*
+ * Make it look like the remote partition, which is associated with the
+ * specified channel, sent us a notify IRQ. This faked IRQ will be handled
+ * by xpc_check_for_dropped_notify_IRQ_sn2().
+ */
+static void
+xpc_send_local_notify_IRQ_sn2(struct xpc_channel *ch, u8 chctl_flag,
+			      char *chctl_flag_string)
+{
+	struct xpc_partition *part = &xpc_partitions[ch->partid];
+	union xpc_channel_ctl_flags chctl = { 0 };
+
+	chctl.flags[ch->number] = chctl_flag;
+	FETCHOP_STORE_OP(TO_AMO((u64)&part->sn.sn2.local_chctl_amo_va->
+				variable), FETCHOP_OR, chctl.all_flags);
+	dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n",
+		chctl_flag_string, ch->partid, ch->number);
+}
+
+#define XPC_SEND_LOCAL_NOTIFY_IRQ_SN2(_ch, _ipi_f) \
+		xpc_send_local_notify_IRQ_sn2(_ch, _ipi_f, #_ipi_f)
+
+static void
+xpc_send_chctl_closerequest_sn2(struct xpc_channel *ch,
+				unsigned long *irq_flags)
+{
+	struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args;
+
+	args->reason = ch->reason;
+	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_CLOSEREQUEST, irq_flags);
+}
+
+static void
+xpc_send_chctl_closereply_sn2(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_CLOSEREPLY, irq_flags);
+}
+
+static void
+xpc_send_chctl_openrequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args;
+
+	args->entry_size = ch->entry_size;
+	args->local_nentries = ch->local_nentries;
+	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREQUEST, irq_flags);
+}
+
+static void
+xpc_send_chctl_openreply_sn2(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args;
+
+	args->remote_nentries = ch->remote_nentries;
+	args->local_nentries = ch->local_nentries;
+	args->local_msgqueue_pa = xp_pa(ch->sn.sn2.local_msgqueue);
+	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREPLY, irq_flags);
+}
+
+static void
+xpc_send_chctl_msgrequest_sn2(struct xpc_channel *ch)
+{
+	XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST, NULL);
+}
+
+static void
+xpc_send_chctl_local_msgrequest_sn2(struct xpc_channel *ch)
+{
+	XPC_SEND_LOCAL_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST);
+}
+
+static void
+xpc_save_remote_msgqueue_pa_sn2(struct xpc_channel *ch,
+				unsigned long msgqueue_pa)
+{
+	ch->sn.sn2.remote_msgqueue_pa = msgqueue_pa;
+}
+
+/*
+ * This next set of functions are used to keep track of when a partition is
+ * potentially engaged in accessing memory belonging to another partition.
+ */
+
+static void
+xpc_indicate_partition_engaged_sn2(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	struct amo *amo = (struct amo *)__va(part->sn.sn2.remote_amos_page_pa +
+					     (XPC_ENGAGED_PARTITIONS_AMO_SN2 *
+					     sizeof(struct amo)));
+
+	local_irq_save(irq_flags);
+
+	/* set bit corresponding to our partid in remote partition's amo */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
+			 BIT(sn_partition_id));
+
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IRQs and amos to it until the heartbeat times out.
+	 */
+	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+							       variable),
+						     xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+}
+
+static void
+xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	unsigned long irq_flags;
+	struct amo *amo = (struct amo *)__va(part_sn2->remote_amos_page_pa +
+					     (XPC_ENGAGED_PARTITIONS_AMO_SN2 *
+					     sizeof(struct amo)));
+
+	local_irq_save(irq_flags);
+
+	/* clear bit corresponding to our partid in remote partition's amo */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
+			 ~BIT(sn_partition_id));
+
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IRQs and amos to it until the heartbeat times out.
+	 */
+	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+							       variable),
+						     xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+
+	/*
+	 * Send activate IRQ to get other side to see that we've cleared our
+	 * bit in their engaged partitions amo.
+	 */
+	xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa,
+				  cnodeid_to_nasid(0),
+				  part_sn2->activate_IRQ_nasid,
+				  part_sn2->activate_IRQ_phys_cpuid);
+}
+
+static void
+xpc_assume_partition_disengaged_sn2(short partid)
+{
+	struct amo *amo = xpc_vars_sn2->amos_page +
+			  XPC_ENGAGED_PARTITIONS_AMO_SN2;
+
+	/* clear bit(s) based on partid mask in our partition's amo */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
+			 ~BIT(partid));
+}
+
+static int
+xpc_partition_engaged_sn2(short partid)
+{
+	struct amo *amo = xpc_vars_sn2->amos_page +
+			  XPC_ENGAGED_PARTITIONS_AMO_SN2;
+
+	/* our partition's amo variable ANDed with partid mask */
+	return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
+		BIT(partid)) != 0;
+}
+
+static int
+xpc_any_partition_engaged_sn2(void)
+{
+	struct amo *amo = xpc_vars_sn2->amos_page +
+			  XPC_ENGAGED_PARTITIONS_AMO_SN2;
+
+	/* our partition's amo variable */
+	return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) != 0;
+}
+
+/* original protection values for each node */
+static u64 xpc_prot_vec_sn2[MAX_NUMNODES];
+
+/*
+ * Change protections to allow amo operations on non-Shub 1.1 systems.
+ */
+static enum xp_retval
+xpc_allow_amo_ops_sn2(struct amo *amos_page)
+{
+	u64 nasid_array = 0;
+	int ret;
+
+	/*
+	 * On SHUB 1.1, we cannot call sn_change_memprotect() since the BIST
+	 * collides with memory operations. On those systems we call
+	 * xpc_allow_amo_ops_shub_wars_1_1_sn2() instead.
+	 */
+	if (!enable_shub_wars_1_1()) {
+		ret = sn_change_memprotect(ia64_tpa((u64)amos_page), PAGE_SIZE,
+					   SN_MEMPROT_ACCESS_CLASS_1,
+					   &nasid_array);
+		if (ret != 0)
+			return xpSalError;
+	}
+	return xpSuccess;
+}
+
+/*
+ * Change protections to allow amo operations on Shub 1.1 systems.
+ */
+static void
+xpc_allow_amo_ops_shub_wars_1_1_sn2(void)
+{
+	int node;
+	int nasid;
+
+	if (!enable_shub_wars_1_1())
+		return;
+
+	for_each_online_node(node) {
+		nasid = cnodeid_to_nasid(node);
+		/* save current protection values */
+		xpc_prot_vec_sn2[node] =
+		    (u64)HUB_L((u64 *)GLOBAL_MMR_ADDR(nasid,
+						  SH1_MD_DQLP_MMR_DIR_PRIVEC0));
+		/* open up everything */
+		HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
+					     SH1_MD_DQLP_MMR_DIR_PRIVEC0),
+		      -1UL);
+		HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid,
+					     SH1_MD_DQRP_MMR_DIR_PRIVEC0),
+		      -1UL);
+	}
+}
+
+static enum xp_retval
+xpc_get_partition_rsvd_page_pa_sn2(void *buf, u64 *cookie, unsigned long *rp_pa,
+				   size_t *len)
+{
+	s64 status;
+	enum xp_retval ret;
+
+	status = sn_partition_reserved_page_pa((u64)buf, cookie, rp_pa, len);
+	if (status == SALRET_OK)
+		ret = xpSuccess;
+	else if (status == SALRET_MORE_PASSES)
+		ret = xpNeedMoreInfo;
+	else
+		ret = xpSalError;
+
+	return ret;
+}
+
+
+static int
+xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp)
+{
+	struct amo *amos_page;
+	int i;
+	int ret;
+
+	xpc_vars_sn2 = XPC_RP_VARS(rp);
+
+	rp->sn.vars_pa = xp_pa(xpc_vars_sn2);
+
+	/* vars_part array follows immediately after vars */
+	xpc_vars_part_sn2 = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) +
+							 XPC_RP_VARS_SIZE);
+
+	/*
+	 * Before clearing xpc_vars_sn2, see if a page of amos had been
+	 * previously allocated. If not we'll need to allocate one and set
+	 * permissions so that cross-partition amos are allowed.
+	 *
+	 * The allocated amo page needs MCA reporting to remain disabled after
+	 * XPC has unloaded.  To make this work, we keep a copy of the pointer
+	 * to this page (i.e., amos_page) in the struct xpc_vars_sn2 structure,
+	 * which is pointed to by the reserved page, and re-use that saved copy
+	 * on subsequent loads of XPC. This amo page is never freed, and its
+	 * memory protections are never restricted.
+	 */
+	amos_page = xpc_vars_sn2->amos_page;
+	if (amos_page == NULL) {
+		amos_page = (struct amo *)TO_AMO(uncached_alloc_page(0, 1));
+		if (amos_page == NULL) {
+			dev_err(xpc_part, "can't allocate page of amos\n");
+			return -ENOMEM;
+		}
+
+		/*
+		 * Open up amo-R/W to cpu.  This is done on Shub 1.1 systems
+		 * when xpc_allow_amo_ops_shub_wars_1_1_sn2() is called.
+		 */
+		ret = xpc_allow_amo_ops_sn2(amos_page);
+		if (ret != xpSuccess) {
+			dev_err(xpc_part, "can't allow amo operations\n");
+			uncached_free_page(__IA64_UNCACHED_OFFSET |
+					   TO_PHYS((u64)amos_page), 1);
+			return -EPERM;
+		}
+	}
+
+	/* clear xpc_vars_sn2 */
+	memset(xpc_vars_sn2, 0, sizeof(struct xpc_vars_sn2));
+
+	xpc_vars_sn2->version = XPC_V_VERSION;
+	xpc_vars_sn2->activate_IRQ_nasid = cpuid_to_nasid(0);
+	xpc_vars_sn2->activate_IRQ_phys_cpuid = cpu_physical_id(0);
+	xpc_vars_sn2->vars_part_pa = xp_pa(xpc_vars_part_sn2);
+	xpc_vars_sn2->amos_page_pa = ia64_tpa((u64)amos_page);
+	xpc_vars_sn2->amos_page = amos_page;	/* save for next load of XPC */
+
+	/* clear xpc_vars_part_sn2 */
+	memset((u64 *)xpc_vars_part_sn2, 0, sizeof(struct xpc_vars_part_sn2) *
+	       XP_MAX_NPARTITIONS_SN2);
+
+	/* initialize the activate IRQ related amo variables */
+	for (i = 0; i < xpc_nasid_mask_nlongs; i++)
+		(void)xpc_init_IRQ_amo_sn2(XPC_ACTIVATE_IRQ_AMOS_SN2 + i);
+
+	/* initialize the engaged remote partitions related amo variables */
+	(void)xpc_init_IRQ_amo_sn2(XPC_ENGAGED_PARTITIONS_AMO_SN2);
+	(void)xpc_init_IRQ_amo_sn2(XPC_DEACTIVATE_REQUEST_AMO_SN2);
+
+	return 0;
+}
+
+static void
+xpc_increment_heartbeat_sn2(void)
+{
+	xpc_vars_sn2->heartbeat++;
+}
+
+static void
+xpc_offline_heartbeat_sn2(void)
+{
+	xpc_increment_heartbeat_sn2();
+	xpc_vars_sn2->heartbeat_offline = 1;
+}
+
+static void
+xpc_online_heartbeat_sn2(void)
+{
+	xpc_increment_heartbeat_sn2();
+	xpc_vars_sn2->heartbeat_offline = 0;
+}
+
+static void
+xpc_heartbeat_init_sn2(void)
+{
+	DBUG_ON(xpc_vars_sn2 == NULL);
+
+	bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2);
+	xpc_heartbeating_to_mask = &xpc_vars_sn2->heartbeating_to_mask[0];
+	xpc_online_heartbeat_sn2();
+}
+
+static void
+xpc_heartbeat_exit_sn2(void)
+{
+	xpc_offline_heartbeat_sn2();
+}
+
+static enum xp_retval
+xpc_get_remote_heartbeat_sn2(struct xpc_partition *part)
+{
+	struct xpc_vars_sn2 *remote_vars;
+	enum xp_retval ret;
+
+	remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer_sn2;
+
+	/* pull the remote vars structure that contains the heartbeat */
+	ret = xp_remote_memcpy(xp_pa(remote_vars),
+			       part->sn.sn2.remote_vars_pa,
+			       XPC_RP_VARS_SIZE);
+	if (ret != xpSuccess)
+		return ret;
+
+	dev_dbg(xpc_part, "partid=%d, heartbeat=%ld, last_heartbeat=%ld, "
+		"heartbeat_offline=%ld, HB_mask[0]=0x%lx\n", XPC_PARTID(part),
+		remote_vars->heartbeat, part->last_heartbeat,
+		remote_vars->heartbeat_offline,
+		remote_vars->heartbeating_to_mask[0]);
+
+	if ((remote_vars->heartbeat == part->last_heartbeat &&
+	    remote_vars->heartbeat_offline == 0) ||
+	    !xpc_hb_allowed(sn_partition_id,
+			    &remote_vars->heartbeating_to_mask)) {
+		ret = xpNoHeartbeat;
+	} else {
+		part->last_heartbeat = remote_vars->heartbeat;
+	}
+
+	return ret;
+}
+
+/*
+ * Get a copy of the remote partition's XPC variables from the reserved page.
+ *
+ * remote_vars points to a buffer that is cacheline aligned for BTE copies and
+ * assumed to be of size XPC_RP_VARS_SIZE.
+ */
+static enum xp_retval
+xpc_get_remote_vars_sn2(unsigned long remote_vars_pa,
+			struct xpc_vars_sn2 *remote_vars)
+{
+	enum xp_retval ret;
+
+	if (remote_vars_pa == 0)
+		return xpVarsNotSet;
+
+	/* pull over the cross partition variables */
+	ret = xp_remote_memcpy(xp_pa(remote_vars), remote_vars_pa,
+			       XPC_RP_VARS_SIZE);
+	if (ret != xpSuccess)
+		return ret;
+
+	if (XPC_VERSION_MAJOR(remote_vars->version) !=
+	    XPC_VERSION_MAJOR(XPC_V_VERSION)) {
+		return xpBadVersion;
+	}
+
+	return xpSuccess;
+}
+
+static void
+xpc_request_partition_activation_sn2(struct xpc_rsvd_page *remote_rp,
+				     unsigned long remote_rp_pa, int nasid)
+{
+	xpc_send_local_activate_IRQ_sn2(nasid);
+}
+
+static void
+xpc_request_partition_reactivation_sn2(struct xpc_partition *part)
+{
+	xpc_send_local_activate_IRQ_sn2(part->sn.sn2.activate_IRQ_nasid);
+}
+
+static void
+xpc_request_partition_deactivation_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	unsigned long irq_flags;
+	struct amo *amo = (struct amo *)__va(part_sn2->remote_amos_page_pa +
+					     (XPC_DEACTIVATE_REQUEST_AMO_SN2 *
+					     sizeof(struct amo)));
+
+	local_irq_save(irq_flags);
+
+	/* set bit corresponding to our partid in remote partition's amo */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR,
+			 BIT(sn_partition_id));
+
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IRQs and amos to it until the heartbeat times out.
+	 */
+	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+							       variable),
+						     xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+
+	/*
+	 * Send activate IRQ to get other side to see that we've set our
+	 * bit in their deactivate request amo.
+	 */
+	xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa,
+				  cnodeid_to_nasid(0),
+				  part_sn2->activate_IRQ_nasid,
+				  part_sn2->activate_IRQ_phys_cpuid);
+}
+
+static void
+xpc_cancel_partition_deactivation_request_sn2(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	struct amo *amo = (struct amo *)__va(part->sn.sn2.remote_amos_page_pa +
+					     (XPC_DEACTIVATE_REQUEST_AMO_SN2 *
+					     sizeof(struct amo)));
+
+	local_irq_save(irq_flags);
+
+	/* clear bit corresponding to our partid in remote partition's amo */
+	FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND,
+			 ~BIT(sn_partition_id));
+
+	/*
+	 * We must always use the nofault function regardless of whether we
+	 * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+	 * didn't, we'd never know that the other partition is down and would
+	 * keep sending IRQs and amos to it until the heartbeat times out.
+	 */
+	(void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->
+							       variable),
+						     xp_nofault_PIOR_target));
+
+	local_irq_restore(irq_flags);
+}
+
+static int
+xpc_partition_deactivation_requested_sn2(short partid)
+{
+	struct amo *amo = xpc_vars_sn2->amos_page +
+			  XPC_DEACTIVATE_REQUEST_AMO_SN2;
+
+	/* our partition's amo variable ANDed with partid mask */
+	return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) &
+		BIT(partid)) != 0;
+}
+
+/*
+ * Update the remote partition's info.
+ */
+static void
+xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version,
+			      unsigned long *remote_rp_ts_jiffies,
+			      unsigned long remote_rp_pa,
+			      unsigned long remote_vars_pa,
+			      struct xpc_vars_sn2 *remote_vars)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+
+	part->remote_rp_version = remote_rp_version;
+	dev_dbg(xpc_part, "  remote_rp_version = 0x%016x\n",
+		part->remote_rp_version);
+
+	part->remote_rp_ts_jiffies = *remote_rp_ts_jiffies;
+	dev_dbg(xpc_part, "  remote_rp_ts_jiffies = 0x%016lx\n",
+		part->remote_rp_ts_jiffies);
+
+	part->remote_rp_pa = remote_rp_pa;
+	dev_dbg(xpc_part, "  remote_rp_pa = 0x%016lx\n", part->remote_rp_pa);
+
+	part_sn2->remote_vars_pa = remote_vars_pa;
+	dev_dbg(xpc_part, "  remote_vars_pa = 0x%016lx\n",
+		part_sn2->remote_vars_pa);
+
+	part->last_heartbeat = remote_vars->heartbeat;
+	dev_dbg(xpc_part, "  last_heartbeat = 0x%016lx\n",
+		part->last_heartbeat);
+
+	part_sn2->remote_vars_part_pa = remote_vars->vars_part_pa;
+	dev_dbg(xpc_part, "  remote_vars_part_pa = 0x%016lx\n",
+		part_sn2->remote_vars_part_pa);
+
+	part_sn2->activate_IRQ_nasid = remote_vars->activate_IRQ_nasid;
+	dev_dbg(xpc_part, "  activate_IRQ_nasid = 0x%x\n",
+		part_sn2->activate_IRQ_nasid);
+
+	part_sn2->activate_IRQ_phys_cpuid =
+	    remote_vars->activate_IRQ_phys_cpuid;
+	dev_dbg(xpc_part, "  activate_IRQ_phys_cpuid = 0x%x\n",
+		part_sn2->activate_IRQ_phys_cpuid);
+
+	part_sn2->remote_amos_page_pa = remote_vars->amos_page_pa;
+	dev_dbg(xpc_part, "  remote_amos_page_pa = 0x%lx\n",
+		part_sn2->remote_amos_page_pa);
+
+	part_sn2->remote_vars_version = remote_vars->version;
+	dev_dbg(xpc_part, "  remote_vars_version = 0x%x\n",
+		part_sn2->remote_vars_version);
+}
+
+/*
+ * Prior code has determined the nasid which generated a activate IRQ.
+ * Inspect that nasid to determine if its partition needs to be activated
+ * or deactivated.
+ *
+ * A partition is considered "awaiting activation" if our partition
+ * flags indicate it is not active and it has a heartbeat.  A
+ * partition is considered "awaiting deactivation" if our partition
+ * flags indicate it is active but it has no heartbeat or it is not
+ * sending its heartbeat to us.
+ *
+ * To determine the heartbeat, the remote nasid must have a properly
+ * initialized reserved page.
+ */
+static void
+xpc_identify_activate_IRQ_req_sn2(int nasid)
+{
+	struct xpc_rsvd_page *remote_rp;
+	struct xpc_vars_sn2 *remote_vars;
+	unsigned long remote_rp_pa;
+	unsigned long remote_vars_pa;
+	int remote_rp_version;
+	int reactivate = 0;
+	unsigned long remote_rp_ts_jiffies = 0;
+	short partid;
+	struct xpc_partition *part;
+	struct xpc_partition_sn2 *part_sn2;
+	enum xp_retval ret;
+
+	/* pull over the reserved page structure */
+
+	remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer_sn2;
+
+	ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
+	if (ret != xpSuccess) {
+		dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
+			 "which sent interrupt, reason=%d\n", nasid, ret);
+		return;
+	}
+
+	remote_vars_pa = remote_rp->sn.vars_pa;
+	remote_rp_version = remote_rp->version;
+	remote_rp_ts_jiffies = remote_rp->ts_jiffies;
+
+	partid = remote_rp->SAL_partid;
+	part = &xpc_partitions[partid];
+	part_sn2 = &part->sn.sn2;
+
+	/* pull over the cross partition variables */
+
+	remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer_sn2;
+
+	ret = xpc_get_remote_vars_sn2(remote_vars_pa, remote_vars);
+	if (ret != xpSuccess) {
+		dev_warn(xpc_part, "unable to get XPC variables from nasid %d, "
+			 "which sent interrupt, reason=%d\n", nasid, ret);
+
+		XPC_DEACTIVATE_PARTITION(part, ret);
+		return;
+	}
+
+	part->activate_IRQ_rcvd++;
+
+	dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = "
+		"%ld:0x%lx\n", (int)nasid, (int)partid, part->activate_IRQ_rcvd,
+		remote_vars->heartbeat, remote_vars->heartbeating_to_mask[0]);
+
+	if (xpc_partition_disengaged(part) &&
+	    part->act_state == XPC_P_AS_INACTIVE) {
+
+		xpc_update_partition_info_sn2(part, remote_rp_version,
+					      &remote_rp_ts_jiffies,
+					      remote_rp_pa, remote_vars_pa,
+					      remote_vars);
+
+		if (xpc_partition_deactivation_requested_sn2(partid)) {
+			/*
+			 * Other side is waiting on us to deactivate even though
+			 * we already have.
+			 */
+			return;
+		}
+
+		xpc_activate_partition(part);
+		return;
+	}
+
+	DBUG_ON(part->remote_rp_version == 0);
+	DBUG_ON(part_sn2->remote_vars_version == 0);
+
+	if (remote_rp_ts_jiffies != part->remote_rp_ts_jiffies) {
+
+		/* the other side rebooted */
+
+		DBUG_ON(xpc_partition_engaged_sn2(partid));
+		DBUG_ON(xpc_partition_deactivation_requested_sn2(partid));
+
+		xpc_update_partition_info_sn2(part, remote_rp_version,
+					      &remote_rp_ts_jiffies,
+					      remote_rp_pa, remote_vars_pa,
+					      remote_vars);
+		reactivate = 1;
+	}
+
+	if (part->disengage_timeout > 0 && !xpc_partition_disengaged(part)) {
+		/* still waiting on other side to disengage from us */
+		return;
+	}
+
+	if (reactivate)
+		XPC_DEACTIVATE_PARTITION(part, xpReactivating);
+	else if (xpc_partition_deactivation_requested_sn2(partid))
+		XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown);
+}
+
+/*
+ * Loop through the activation amo variables and process any bits
+ * which are set.  Each bit indicates a nasid sending a partition
+ * activation or deactivation request.
+ *
+ * Return #of IRQs detected.
+ */
+int
+xpc_identify_activate_IRQ_sender_sn2(void)
+{
+	int l;
+	int b;
+	unsigned long nasid_mask_long;
+	u64 nasid;		/* remote nasid */
+	int n_IRQs_detected = 0;
+	struct amo *act_amos;
+
+	act_amos = xpc_vars_sn2->amos_page + XPC_ACTIVATE_IRQ_AMOS_SN2;
+
+	/* scan through activate amo variables looking for non-zero entries */
+	for (l = 0; l < xpc_nasid_mask_nlongs; l++) {
+
+		if (xpc_exiting)
+			break;
+
+		nasid_mask_long = xpc_receive_IRQ_amo_sn2(&act_amos[l]);
+
+		b = find_first_bit(&nasid_mask_long, BITS_PER_LONG);
+		if (b >= BITS_PER_LONG) {
+			/* no IRQs from nasids in this amo variable */
+			continue;
+		}
+
+		dev_dbg(xpc_part, "amo[%d] gave back 0x%lx\n", l,
+			nasid_mask_long);
+
+		/*
+		 * If this nasid has been added to the machine since
+		 * our partition was reset, this will retain the
+		 * remote nasid in our reserved pages machine mask.
+		 * This is used in the event of module reload.
+		 */
+		xpc_mach_nasids[l] |= nasid_mask_long;
+
+		/* locate the nasid(s) which sent interrupts */
+
+		do {
+			n_IRQs_detected++;
+			nasid = (l * BITS_PER_LONG + b) * 2;
+			dev_dbg(xpc_part, "interrupt from nasid %ld\n", nasid);
+			xpc_identify_activate_IRQ_req_sn2(nasid);
+
+			b = find_next_bit(&nasid_mask_long, BITS_PER_LONG,
+					  b + 1);
+		} while (b < BITS_PER_LONG);
+	}
+	return n_IRQs_detected;
+}
+
+static void
+xpc_process_activate_IRQ_rcvd_sn2(void)
+{
+	unsigned long irq_flags;
+	int n_IRQs_expected;
+	int n_IRQs_detected;
+
+	DBUG_ON(xpc_activate_IRQ_rcvd == 0);
+
+	spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+	n_IRQs_expected = xpc_activate_IRQ_rcvd;
+	xpc_activate_IRQ_rcvd = 0;
+	spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+	n_IRQs_detected = xpc_identify_activate_IRQ_sender_sn2();
+	if (n_IRQs_detected < n_IRQs_expected) {
+		/* retry once to help avoid missing amo */
+		(void)xpc_identify_activate_IRQ_sender_sn2();
+	}
+}
+
+/*
+ * Setup the channel structures that are sn2 specific.
+ */
+static enum xp_retval
+xpc_setup_ch_structures_sn_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	struct xpc_channel_sn2 *ch_sn2;
+	enum xp_retval retval;
+	int ret;
+	int cpuid;
+	int ch_number;
+	struct timer_list *timer;
+	short partid = XPC_PARTID(part);
+
+	/* allocate all the required GET/PUT values */
+
+	part_sn2->local_GPs =
+	    xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, GFP_KERNEL,
+					  &part_sn2->local_GPs_base);
+	if (part_sn2->local_GPs == NULL) {
+		dev_err(xpc_chan, "can't get memory for local get/put "
+			"values\n");
+		return xpNoMemory;
+	}
+
+	part_sn2->remote_GPs =
+	    xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, GFP_KERNEL,
+					  &part_sn2->remote_GPs_base);
+	if (part_sn2->remote_GPs == NULL) {
+		dev_err(xpc_chan, "can't get memory for remote get/put "
+			"values\n");
+		retval = xpNoMemory;
+		goto out_1;
+	}
+
+	part_sn2->remote_GPs_pa = 0;
+
+	/* allocate all the required open and close args */
+
+	part_sn2->local_openclose_args =
+	    xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE,
+					  GFP_KERNEL, &part_sn2->
+					  local_openclose_args_base);
+	if (part_sn2->local_openclose_args == NULL) {
+		dev_err(xpc_chan, "can't get memory for local connect args\n");
+		retval = xpNoMemory;
+		goto out_2;
+	}
+
+	part_sn2->remote_openclose_args_pa = 0;
+
+	part_sn2->local_chctl_amo_va = xpc_init_IRQ_amo_sn2(partid);
+
+	part_sn2->notify_IRQ_nasid = 0;
+	part_sn2->notify_IRQ_phys_cpuid = 0;
+	part_sn2->remote_chctl_amo_va = NULL;
+
+	sprintf(part_sn2->notify_IRQ_owner, "xpc%02d", partid);
+	ret = request_irq(SGI_XPC_NOTIFY, xpc_handle_notify_IRQ_sn2,
+			  IRQF_SHARED, part_sn2->notify_IRQ_owner,
+			  (void *)(u64)partid);
+	if (ret != 0) {
+		dev_err(xpc_chan, "can't register NOTIFY IRQ handler, "
+			"errno=%d\n", -ret);
+		retval = xpLackOfResources;
+		goto out_3;
+	}
+
+	/* Setup a timer to check for dropped notify IRQs */
+	timer = &part_sn2->dropped_notify_IRQ_timer;
+	init_timer(timer);
+	timer->function =
+	    (void (*)(unsigned long))xpc_check_for_dropped_notify_IRQ_sn2;
+	timer->data = (unsigned long)part;
+	timer->expires = jiffies + XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL;
+	add_timer(timer);
+
+	for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
+		ch_sn2 = &part->channels[ch_number].sn.sn2;
+
+		ch_sn2->local_GP = &part_sn2->local_GPs[ch_number];
+		ch_sn2->local_openclose_args =
+		    &part_sn2->local_openclose_args[ch_number];
+
+		mutex_init(&ch_sn2->msg_to_pull_mutex);
+	}
+
+	/*
+	 * Setup the per partition specific variables required by the
+	 * remote partition to establish channel connections with us.
+	 *
+	 * The setting of the magic # indicates that these per partition
+	 * specific variables are ready to be used.
+	 */
+	xpc_vars_part_sn2[partid].GPs_pa = xp_pa(part_sn2->local_GPs);
+	xpc_vars_part_sn2[partid].openclose_args_pa =
+	    xp_pa(part_sn2->local_openclose_args);
+	xpc_vars_part_sn2[partid].chctl_amo_pa =
+	    xp_pa(part_sn2->local_chctl_amo_va);
+	cpuid = raw_smp_processor_id();	/* any CPU in this partition will do */
+	xpc_vars_part_sn2[partid].notify_IRQ_nasid = cpuid_to_nasid(cpuid);
+	xpc_vars_part_sn2[partid].notify_IRQ_phys_cpuid =
+	    cpu_physical_id(cpuid);
+	xpc_vars_part_sn2[partid].nchannels = part->nchannels;
+	xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC1_SN2;
+
+	return xpSuccess;
+
+	/* setup of ch structures failed */
+out_3:
+	kfree(part_sn2->local_openclose_args_base);
+	part_sn2->local_openclose_args = NULL;
+out_2:
+	kfree(part_sn2->remote_GPs_base);
+	part_sn2->remote_GPs = NULL;
+out_1:
+	kfree(part_sn2->local_GPs_base);
+	part_sn2->local_GPs = NULL;
+	return retval;
+}
+
+/*
+ * Teardown the channel structures that are sn2 specific.
+ */
+static void
+xpc_teardown_ch_structures_sn_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	short partid = XPC_PARTID(part);
+
+	/*
+	 * Indicate that the variables specific to the remote partition are no
+	 * longer available for its use.
+	 */
+	xpc_vars_part_sn2[partid].magic = 0;
+
+	/* in case we've still got outstanding timers registered... */
+	del_timer_sync(&part_sn2->dropped_notify_IRQ_timer);
+	free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid);
+
+	kfree(part_sn2->local_openclose_args_base);
+	part_sn2->local_openclose_args = NULL;
+	kfree(part_sn2->remote_GPs_base);
+	part_sn2->remote_GPs = NULL;
+	kfree(part_sn2->local_GPs_base);
+	part_sn2->local_GPs = NULL;
+	part_sn2->local_chctl_amo_va = NULL;
+}
+
+/*
+ * Create a wrapper that hides the underlying mechanism for pulling a cacheline
+ * (or multiple cachelines) from a remote partition.
+ *
+ * src_pa must be a cacheline aligned physical address on the remote partition.
+ * dst must be a cacheline aligned virtual address on this partition.
+ * cnt must be cacheline sized
+ */
+/* ??? Replace this function by call to xp_remote_memcpy() or bte_copy()? */
+static enum xp_retval
+xpc_pull_remote_cachelines_sn2(struct xpc_partition *part, void *dst,
+			       const unsigned long src_pa, size_t cnt)
+{
+	enum xp_retval ret;
+
+	DBUG_ON(src_pa != L1_CACHE_ALIGN(src_pa));
+	DBUG_ON((unsigned long)dst != L1_CACHE_ALIGN((unsigned long)dst));
+	DBUG_ON(cnt != L1_CACHE_ALIGN(cnt));
+
+	if (part->act_state == XPC_P_AS_DEACTIVATING)
+		return part->reason;
+
+	ret = xp_remote_memcpy(xp_pa(dst), src_pa, cnt);
+	if (ret != xpSuccess) {
+		dev_dbg(xpc_chan, "xp_remote_memcpy() from partition %d failed,"
+			" ret=%d\n", XPC_PARTID(part), ret);
+	}
+	return ret;
+}
+
+/*
+ * Pull the remote per partition specific variables from the specified
+ * partition.
+ */
+static enum xp_retval
+xpc_pull_remote_vars_part_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	u8 buffer[L1_CACHE_BYTES * 2];
+	struct xpc_vars_part_sn2 *pulled_entry_cacheline =
+	    (struct xpc_vars_part_sn2 *)L1_CACHE_ALIGN((u64)buffer);
+	struct xpc_vars_part_sn2 *pulled_entry;
+	unsigned long remote_entry_cacheline_pa;
+	unsigned long remote_entry_pa;
+	short partid = XPC_PARTID(part);
+	enum xp_retval ret;
+
+	/* pull the cacheline that contains the variables we're interested in */
+
+	DBUG_ON(part_sn2->remote_vars_part_pa !=
+		L1_CACHE_ALIGN(part_sn2->remote_vars_part_pa));
+	DBUG_ON(sizeof(struct xpc_vars_part_sn2) != L1_CACHE_BYTES / 2);
+
+	remote_entry_pa = part_sn2->remote_vars_part_pa +
+	    sn_partition_id * sizeof(struct xpc_vars_part_sn2);
+
+	remote_entry_cacheline_pa = (remote_entry_pa & ~(L1_CACHE_BYTES - 1));
+
+	pulled_entry = (struct xpc_vars_part_sn2 *)((u64)pulled_entry_cacheline
+						    + (remote_entry_pa &
+						    (L1_CACHE_BYTES - 1)));
+
+	ret = xpc_pull_remote_cachelines_sn2(part, pulled_entry_cacheline,
+					     remote_entry_cacheline_pa,
+					     L1_CACHE_BYTES);
+	if (ret != xpSuccess) {
+		dev_dbg(xpc_chan, "failed to pull XPC vars_part from "
+			"partition %d, ret=%d\n", partid, ret);
+		return ret;
+	}
+
+	/* see if they've been set up yet */
+
+	if (pulled_entry->magic != XPC_VP_MAGIC1_SN2 &&
+	    pulled_entry->magic != XPC_VP_MAGIC2_SN2) {
+
+		if (pulled_entry->magic != 0) {
+			dev_dbg(xpc_chan, "partition %d's XPC vars_part for "
+				"partition %d has bad magic value (=0x%lx)\n",
+				partid, sn_partition_id, pulled_entry->magic);
+			return xpBadMagic;
+		}
+
+		/* they've not been initialized yet */
+		return xpRetry;
+	}
+
+	if (xpc_vars_part_sn2[partid].magic == XPC_VP_MAGIC1_SN2) {
+
+		/* validate the variables */
+
+		if (pulled_entry->GPs_pa == 0 ||
+		    pulled_entry->openclose_args_pa == 0 ||
+		    pulled_entry->chctl_amo_pa == 0) {
+
+			dev_err(xpc_chan, "partition %d's XPC vars_part for "
+				"partition %d are not valid\n", partid,
+				sn_partition_id);
+			return xpInvalidAddress;
+		}
+
+		/* the variables we imported look to be valid */
+
+		part_sn2->remote_GPs_pa = pulled_entry->GPs_pa;
+		part_sn2->remote_openclose_args_pa =
+		    pulled_entry->openclose_args_pa;
+		part_sn2->remote_chctl_amo_va =
+		    (struct amo *)__va(pulled_entry->chctl_amo_pa);
+		part_sn2->notify_IRQ_nasid = pulled_entry->notify_IRQ_nasid;
+		part_sn2->notify_IRQ_phys_cpuid =
+		    pulled_entry->notify_IRQ_phys_cpuid;
+
+		if (part->nchannels > pulled_entry->nchannels)
+			part->nchannels = pulled_entry->nchannels;
+
+		/* let the other side know that we've pulled their variables */
+
+		xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC2_SN2;
+	}
+
+	if (pulled_entry->magic == XPC_VP_MAGIC1_SN2)
+		return xpRetry;
+
+	return xpSuccess;
+}
+
+/*
+ * Establish first contact with the remote partititon. This involves pulling
+ * the XPC per partition variables from the remote partition and waiting for
+ * the remote partition to pull ours.
+ */
+static enum xp_retval
+xpc_make_first_contact_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	enum xp_retval ret;
+
+	/*
+	 * Register the remote partition's amos with SAL so it can handle
+	 * and cleanup errors within that address range should the remote
+	 * partition go down. We don't unregister this range because it is
+	 * difficult to tell when outstanding writes to the remote partition
+	 * are finished and thus when it is safe to unregister. This should
+	 * not result in wasted space in the SAL xp_addr_region table because
+	 * we should get the same page for remote_amos_page_pa after module
+	 * reloads and system reboots.
+	 */
+	if (sn_register_xp_addr_region(part_sn2->remote_amos_page_pa,
+				       PAGE_SIZE, 1) < 0) {
+		dev_warn(xpc_part, "xpc_activating(%d) failed to register "
+			 "xp_addr region\n", XPC_PARTID(part));
+
+		ret = xpPhysAddrRegFailed;
+		XPC_DEACTIVATE_PARTITION(part, ret);
+		return ret;
+	}
+
+	/*
+	 * Send activate IRQ to get other side to activate if they've not
+	 * already begun to do so.
+	 */
+	xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa,
+				  cnodeid_to_nasid(0),
+				  part_sn2->activate_IRQ_nasid,
+				  part_sn2->activate_IRQ_phys_cpuid);
+
+	while ((ret = xpc_pull_remote_vars_part_sn2(part)) != xpSuccess) {
+		if (ret != xpRetry) {
+			XPC_DEACTIVATE_PARTITION(part, ret);
+			return ret;
+		}
+
+		dev_dbg(xpc_part, "waiting to make first contact with "
+			"partition %d\n", XPC_PARTID(part));
+
+		/* wait a 1/4 of a second or so */
+		(void)msleep_interruptible(250);
+
+		if (part->act_state == XPC_P_AS_DEACTIVATING)
+			return part->reason;
+	}
+
+	return xpSuccess;
+}
+
+/*
+ * Get the chctl flags and pull the openclose args and/or remote GPs as needed.
+ */
+static u64
+xpc_get_chctl_all_flags_sn2(struct xpc_partition *part)
+{
+	struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
+	unsigned long irq_flags;
+	union xpc_channel_ctl_flags chctl;
+	enum xp_retval ret;
+
+	/*
+	 * See if there are any chctl flags to be handled.
+	 */
+
+	spin_lock_irqsave(&part->chctl_lock, irq_flags);
+	chctl = part->chctl;
+	if (chctl.all_flags != 0)
+		part->chctl.all_flags = 0;
+
+	spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+	if (xpc_any_openclose_chctl_flags_set(&chctl)) {
+		ret = xpc_pull_remote_cachelines_sn2(part, part->
+						     remote_openclose_args,
+						     part_sn2->
+						     remote_openclose_args_pa,
+						     XPC_OPENCLOSE_ARGS_SIZE);
+		if (ret != xpSuccess) {
+			XPC_DEACTIVATE_PARTITION(part, ret);
+
+			dev_dbg(xpc_chan, "failed to pull openclose args from "
+				"partition %d, ret=%d\n", XPC_PARTID(part),
+				ret);
+
+			/* don't bother processing chctl flags anymore */
+			chctl.all_flags = 0;
+		}
+	}
+
+	if (xpc_any_msg_chctl_flags_set(&chctl)) {
+		ret = xpc_pull_remote_cachelines_sn2(part, part_sn2->remote_GPs,
+						     part_sn2->remote_GPs_pa,
+						     XPC_GP_SIZE);
+		if (ret != xpSuccess) {
+			XPC_DEACTIVATE_PARTITION(part, ret);
+
+			dev_dbg(xpc_chan, "failed to pull GPs from partition "
+				"%d, ret=%d\n", XPC_PARTID(part), ret);
+
+			/* don't bother processing chctl flags anymore */
+			chctl.all_flags = 0;
+		}
+	}
+
+	return chctl.all_flags;
+}
+
+/*
+ * Allocate the local message queue and the notify queue.
+ */
+static enum xp_retval
+xpc_allocate_local_msgqueue_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	unsigned long irq_flags;
+	int nentries;
+	size_t nbytes;
+
+	for (nentries = ch->local_nentries; nentries > 0; nentries--) {
+
+		nbytes = nentries * ch->entry_size;
+		ch_sn2->local_msgqueue =
+		    xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL,
+						  &ch_sn2->local_msgqueue_base);
+		if (ch_sn2->local_msgqueue == NULL)
+			continue;
+
+		nbytes = nentries * sizeof(struct xpc_notify_sn2);
+		ch_sn2->notify_queue = kzalloc(nbytes, GFP_KERNEL);
+		if (ch_sn2->notify_queue == NULL) {
+			kfree(ch_sn2->local_msgqueue_base);
+			ch_sn2->local_msgqueue = NULL;
+			continue;
+		}
+
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		if (nentries < ch->local_nentries) {
+			dev_dbg(xpc_chan, "nentries=%d local_nentries=%d, "
+				"partid=%d, channel=%d\n", nentries,
+				ch->local_nentries, ch->partid, ch->number);
+
+			ch->local_nentries = nentries;
+		}
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+		return xpSuccess;
+	}
+
+	dev_dbg(xpc_chan, "can't get memory for local message queue and notify "
+		"queue, partid=%d, channel=%d\n", ch->partid, ch->number);
+	return xpNoMemory;
+}
+
+/*
+ * Allocate the cached remote message queue.
+ */
+static enum xp_retval
+xpc_allocate_remote_msgqueue_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	unsigned long irq_flags;
+	int nentries;
+	size_t nbytes;
+
+	DBUG_ON(ch->remote_nentries <= 0);
+
+	for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
+
+		nbytes = nentries * ch->entry_size;
+		ch_sn2->remote_msgqueue =
+		    xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL, &ch_sn2->
+						  remote_msgqueue_base);
+		if (ch_sn2->remote_msgqueue == NULL)
+			continue;
+
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		if (nentries < ch->remote_nentries) {
+			dev_dbg(xpc_chan, "nentries=%d remote_nentries=%d, "
+				"partid=%d, channel=%d\n", nentries,
+				ch->remote_nentries, ch->partid, ch->number);
+
+			ch->remote_nentries = nentries;
+		}
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+		return xpSuccess;
+	}
+
+	dev_dbg(xpc_chan, "can't get memory for cached remote message queue, "
+		"partid=%d, channel=%d\n", ch->partid, ch->number);
+	return xpNoMemory;
+}
+
+/*
+ * Allocate message queues and other stuff associated with a channel.
+ *
+ * Note: Assumes all of the channel sizes are filled in.
+ */
+static enum xp_retval
+xpc_setup_msg_structures_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	enum xp_retval ret;
+
+	DBUG_ON(ch->flags & XPC_C_SETUP);
+
+	ret = xpc_allocate_local_msgqueue_sn2(ch);
+	if (ret == xpSuccess) {
+
+		ret = xpc_allocate_remote_msgqueue_sn2(ch);
+		if (ret != xpSuccess) {
+			kfree(ch_sn2->local_msgqueue_base);
+			ch_sn2->local_msgqueue = NULL;
+			kfree(ch_sn2->notify_queue);
+			ch_sn2->notify_queue = NULL;
+		}
+	}
+	return ret;
+}
+
+/*
+ * Free up message queues and other stuff that were allocated for the specified
+ * channel.
+ */
+static void
+xpc_teardown_msg_structures_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+
+	DBUG_ON(!spin_is_locked(&ch->lock));
+
+	ch_sn2->remote_msgqueue_pa = 0;
+
+	ch_sn2->local_GP->get = 0;
+	ch_sn2->local_GP->put = 0;
+	ch_sn2->remote_GP.get = 0;
+	ch_sn2->remote_GP.put = 0;
+	ch_sn2->w_local_GP.get = 0;
+	ch_sn2->w_local_GP.put = 0;
+	ch_sn2->w_remote_GP.get = 0;
+	ch_sn2->w_remote_GP.put = 0;
+	ch_sn2->next_msg_to_pull = 0;
+
+	if (ch->flags & XPC_C_SETUP) {
+		dev_dbg(xpc_chan, "ch->flags=0x%x, partid=%d, channel=%d\n",
+			ch->flags, ch->partid, ch->number);
+
+		kfree(ch_sn2->local_msgqueue_base);
+		ch_sn2->local_msgqueue = NULL;
+		kfree(ch_sn2->remote_msgqueue_base);
+		ch_sn2->remote_msgqueue = NULL;
+		kfree(ch_sn2->notify_queue);
+		ch_sn2->notify_queue = NULL;
+	}
+}
+
+/*
+ * Notify those who wanted to be notified upon delivery of their message.
+ */
+static void
+xpc_notify_senders_sn2(struct xpc_channel *ch, enum xp_retval reason, s64 put)
+{
+	struct xpc_notify_sn2 *notify;
+	u8 notify_type;
+	s64 get = ch->sn.sn2.w_remote_GP.get - 1;
+
+	while (++get < put && atomic_read(&ch->n_to_notify) > 0) {
+
+		notify = &ch->sn.sn2.notify_queue[get % ch->local_nentries];
+
+		/*
+		 * See if the notify entry indicates it was associated with
+		 * a message who's sender wants to be notified. It is possible
+		 * that it is, but someone else is doing or has done the
+		 * notification.
+		 */
+		notify_type = notify->type;
+		if (notify_type == 0 ||
+		    cmpxchg(&notify->type, notify_type, 0) != notify_type) {
+			continue;
+		}
+
+		DBUG_ON(notify_type != XPC_N_CALL);
+
+		atomic_dec(&ch->n_to_notify);
+
+		if (notify->func != NULL) {
+			dev_dbg(xpc_chan, "notify->func() called, notify=0x%p "
+				"msg_number=%ld partid=%d channel=%d\n",
+				(void *)notify, get, ch->partid, ch->number);
+
+			notify->func(reason, ch->partid, ch->number,
+				     notify->key);
+
+			dev_dbg(xpc_chan, "notify->func() returned, notify=0x%p"
+				" msg_number=%ld partid=%d channel=%d\n",
+				(void *)notify, get, ch->partid, ch->number);
+		}
+	}
+}
+
+static void
+xpc_notify_senders_of_disconnect_sn2(struct xpc_channel *ch)
+{
+	xpc_notify_senders_sn2(ch, ch->reason, ch->sn.sn2.w_local_GP.put);
+}
+
+/*
+ * Clear some of the msg flags in the local message queue.
+ */
+static inline void
+xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	s64 get;
+
+	get = ch_sn2->w_remote_GP.get;
+	do {
+		msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue +
+					     (get % ch->local_nentries) *
+					     ch->entry_size);
+		msg->flags = 0;
+	} while (++get < ch_sn2->remote_GP.get);
+}
+
+/*
+ * Clear some of the msg flags in the remote message queue.
+ */
+static inline void
+xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	s64 put;
+
+	put = ch_sn2->w_remote_GP.put;
+	do {
+		msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue +
+					     (put % ch->remote_nentries) *
+					     ch->entry_size);
+		msg->flags = 0;
+	} while (++put < ch_sn2->remote_GP.put);
+}
+
+static int
+xpc_n_of_deliverable_payloads_sn2(struct xpc_channel *ch)
+{
+	return ch->sn.sn2.w_remote_GP.put - ch->sn.sn2.w_local_GP.get;
+}
+
+static void
+xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number)
+{
+	struct xpc_channel *ch = &part->channels[ch_number];
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	int npayloads_sent;
+
+	ch_sn2->remote_GP = part->sn.sn2.remote_GPs[ch_number];
+
+	/* See what, if anything, has changed for each connected channel */
+
+	xpc_msgqueue_ref(ch);
+
+	if (ch_sn2->w_remote_GP.get == ch_sn2->remote_GP.get &&
+	    ch_sn2->w_remote_GP.put == ch_sn2->remote_GP.put) {
+		/* nothing changed since GPs were last pulled */
+		xpc_msgqueue_deref(ch);
+		return;
+	}
+
+	if (!(ch->flags & XPC_C_CONNECTED)) {
+		xpc_msgqueue_deref(ch);
+		return;
+	}
+
+	/*
+	 * First check to see if messages recently sent by us have been
+	 * received by the other side. (The remote GET value will have
+	 * changed since we last looked at it.)
+	 */
+
+	if (ch_sn2->w_remote_GP.get != ch_sn2->remote_GP.get) {
+
+		/*
+		 * We need to notify any senders that want to be notified
+		 * that their sent messages have been received by their
+		 * intended recipients. We need to do this before updating
+		 * w_remote_GP.get so that we don't allocate the same message
+		 * queue entries prematurely (see xpc_allocate_msg()).
+		 */
+		if (atomic_read(&ch->n_to_notify) > 0) {
+			/*
+			 * Notify senders that messages sent have been
+			 * received and delivered by the other side.
+			 */
+			xpc_notify_senders_sn2(ch, xpMsgDelivered,
+					       ch_sn2->remote_GP.get);
+		}
+
+		/*
+		 * Clear msg->flags in previously sent messages, so that
+		 * they're ready for xpc_allocate_msg().
+		 */
+		xpc_clear_local_msgqueue_flags_sn2(ch);
+
+		ch_sn2->w_remote_GP.get = ch_sn2->remote_GP.get;
+
+		dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, "
+			"channel=%d\n", ch_sn2->w_remote_GP.get, ch->partid,
+			ch->number);
+
+		/*
+		 * If anyone was waiting for message queue entries to become
+		 * available, wake them up.
+		 */
+		if (atomic_read(&ch->n_on_msg_allocate_wq) > 0)
+			wake_up(&ch->msg_allocate_wq);
+	}
+
+	/*
+	 * Now check for newly sent messages by the other side. (The remote
+	 * PUT value will have changed since we last looked at it.)
+	 */
+
+	if (ch_sn2->w_remote_GP.put != ch_sn2->remote_GP.put) {
+		/*
+		 * Clear msg->flags in previously received messages, so that
+		 * they're ready for xpc_get_deliverable_payload_sn2().
+		 */
+		xpc_clear_remote_msgqueue_flags_sn2(ch);
+
+		ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put;
+
+		dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
+			"channel=%d\n", ch_sn2->w_remote_GP.put, ch->partid,
+			ch->number);
+
+		npayloads_sent = xpc_n_of_deliverable_payloads_sn2(ch);
+		if (npayloads_sent > 0) {
+			dev_dbg(xpc_chan, "msgs waiting to be copied and "
+				"delivered=%d, partid=%d, channel=%d\n",
+				npayloads_sent, ch->partid, ch->number);
+
+			if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)
+				xpc_activate_kthreads(ch, npayloads_sent);
+		}
+	}
+
+	xpc_msgqueue_deref(ch);
+}
+
+static struct xpc_msg_sn2 *
+xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get)
+{
+	struct xpc_partition *part = &xpc_partitions[ch->partid];
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	unsigned long remote_msg_pa;
+	struct xpc_msg_sn2 *msg;
+	u32 msg_index;
+	u32 nmsgs;
+	u64 msg_offset;
+	enum xp_retval ret;
+
+	if (mutex_lock_interruptible(&ch_sn2->msg_to_pull_mutex) != 0) {
+		/* we were interrupted by a signal */
+		return NULL;
+	}
+
+	while (get >= ch_sn2->next_msg_to_pull) {
+
+		/* pull as many messages as are ready and able to be pulled */
+
+		msg_index = ch_sn2->next_msg_to_pull % ch->remote_nentries;
+
+		DBUG_ON(ch_sn2->next_msg_to_pull >= ch_sn2->w_remote_GP.put);
+		nmsgs = ch_sn2->w_remote_GP.put - ch_sn2->next_msg_to_pull;
+		if (msg_index + nmsgs > ch->remote_nentries) {
+			/* ignore the ones that wrap the msg queue for now */
+			nmsgs = ch->remote_nentries - msg_index;
+		}
+
+		msg_offset = msg_index * ch->entry_size;
+		msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue +
+		    msg_offset);
+		remote_msg_pa = ch_sn2->remote_msgqueue_pa + msg_offset;
+
+		ret = xpc_pull_remote_cachelines_sn2(part, msg, remote_msg_pa,
+						     nmsgs * ch->entry_size);
+		if (ret != xpSuccess) {
+
+			dev_dbg(xpc_chan, "failed to pull %d msgs starting with"
+				" msg %ld from partition %d, channel=%d, "
+				"ret=%d\n", nmsgs, ch_sn2->next_msg_to_pull,
+				ch->partid, ch->number, ret);
+
+			XPC_DEACTIVATE_PARTITION(part, ret);
+
+			mutex_unlock(&ch_sn2->msg_to_pull_mutex);
+			return NULL;
+		}
+
+		ch_sn2->next_msg_to_pull += nmsgs;
+	}
+
+	mutex_unlock(&ch_sn2->msg_to_pull_mutex);
+
+	/* return the message we were looking for */
+	msg_offset = (get % ch->remote_nentries) * ch->entry_size;
+	msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue + msg_offset);
+
+	return msg;
+}
+
+/*
+ * Get the next deliverable message's payload.
+ */
+static void *
+xpc_get_deliverable_payload_sn2(struct xpc_channel *ch)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	void *payload = NULL;
+	s64 get;
+
+	do {
+		if (ch->flags & XPC_C_DISCONNECTING)
+			break;
+
+		get = ch_sn2->w_local_GP.get;
+		rmb();	/* guarantee that .get loads before .put */
+		if (get == ch_sn2->w_remote_GP.put)
+			break;
+
+		/* There are messages waiting to be pulled and delivered.
+		 * We need to try to secure one for ourselves. We'll do this
+		 * by trying to increment w_local_GP.get and hope that no one
+		 * else beats us to it. If they do, we'll we'll simply have
+		 * to try again for the next one.
+		 */
+
+		if (cmpxchg(&ch_sn2->w_local_GP.get, get, get + 1) == get) {
+			/* we got the entry referenced by get */
+
+			dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, "
+				"partid=%d, channel=%d\n", get + 1,
+				ch->partid, ch->number);
+
+			/* pull the message from the remote partition */
+
+			msg = xpc_pull_remote_msg_sn2(ch, get);
+
+			DBUG_ON(msg != NULL && msg->number != get);
+			DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE));
+			DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY));
+
+			payload = &msg->payload;
+			break;
+		}
+
+	} while (1);
+
+	return payload;
+}
+
+/*
+ * Now we actually send the messages that are ready to be sent by advancing
+ * the local message queue's Put value and then send a chctl msgrequest to the
+ * recipient partition.
+ */
+static void
+xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	s64 put = initial_put + 1;
+	int send_msgrequest = 0;
+
+	while (1) {
+
+		while (1) {
+			if (put == ch_sn2->w_local_GP.put)
+				break;
+
+			msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->
+						     local_msgqueue + (put %
+						     ch->local_nentries) *
+						     ch->entry_size);
+
+			if (!(msg->flags & XPC_M_SN2_READY))
+				break;
+
+			put++;
+		}
+
+		if (put == initial_put) {
+			/* nothing's changed */
+			break;
+		}
+
+		if (cmpxchg_rel(&ch_sn2->local_GP->put, initial_put, put) !=
+		    initial_put) {
+			/* someone else beat us to it */
+			DBUG_ON(ch_sn2->local_GP->put < initial_put);
+			break;
+		}
+
+		/* we just set the new value of local_GP->put */
+
+		dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, "
+			"channel=%d\n", put, ch->partid, ch->number);
+
+		send_msgrequest = 1;
+
+		/*
+		 * We need to ensure that the message referenced by
+		 * local_GP->put is not XPC_M_SN2_READY or that local_GP->put
+		 * equals w_local_GP.put, so we'll go have a look.
+		 */
+		initial_put = put;
+	}
+
+	if (send_msgrequest)
+		xpc_send_chctl_msgrequest_sn2(ch);
+}
+
+/*
+ * Allocate an entry for a message from the message queue associated with the
+ * specified channel.
+ */
+static enum xp_retval
+xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags,
+		     struct xpc_msg_sn2 **address_of_msg)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	enum xp_retval ret;
+	s64 put;
+
+	/*
+	 * Get the next available message entry from the local message queue.
+	 * If none are available, we'll make sure that we grab the latest
+	 * GP values.
+	 */
+	ret = xpTimeout;
+
+	while (1) {
+
+		put = ch_sn2->w_local_GP.put;
+		rmb();	/* guarantee that .put loads before .get */
+		if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) {
+
+			/* There are available message entries. We need to try
+			 * to secure one for ourselves. We'll do this by trying
+			 * to increment w_local_GP.put as long as someone else
+			 * doesn't beat us to it. If they do, we'll have to
+			 * try again.
+			 */
+			if (cmpxchg(&ch_sn2->w_local_GP.put, put, put + 1) ==
+			    put) {
+				/* we got the entry referenced by put */
+				break;
+			}
+			continue;	/* try again */
+		}
+
+		/*
+		 * There aren't any available msg entries at this time.
+		 *
+		 * In waiting for a message entry to become available,
+		 * we set a timeout in case the other side is not sending
+		 * completion interrupts. This lets us fake a notify IRQ
+		 * that will cause the notify IRQ handler to fetch the latest
+		 * GP values as if an interrupt was sent by the other side.
+		 */
+		if (ret == xpTimeout)
+			xpc_send_chctl_local_msgrequest_sn2(ch);
+
+		if (flags & XPC_NOWAIT)
+			return xpNoWait;
+
+		ret = xpc_allocate_msg_wait(ch);
+		if (ret != xpInterrupted && ret != xpTimeout)
+			return ret;
+	}
+
+	/* get the message's address and initialize it */
+	msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue +
+				     (put % ch->local_nentries) *
+				     ch->entry_size);
+
+	DBUG_ON(msg->flags != 0);
+	msg->number = put;
+
+	dev_dbg(xpc_chan, "w_local_GP.put changed to %ld; msg=0x%p, "
+		"msg_number=%ld, partid=%d, channel=%d\n", put + 1,
+		(void *)msg, msg->number, ch->partid, ch->number);
+
+	*address_of_msg = msg;
+	return xpSuccess;
+}
+
+/*
+ * Common code that does the actual sending of the message by advancing the
+ * local message queue's Put value and sends a chctl msgrequest to the
+ * partition the message is being sent to.
+ */
+static enum xp_retval
+xpc_send_payload_sn2(struct xpc_channel *ch, u32 flags, void *payload,
+		     u16 payload_size, u8 notify_type, xpc_notify_func func,
+		     void *key)
+{
+	enum xp_retval ret = xpSuccess;
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg = msg;
+	struct xpc_notify_sn2 *notify = notify;
+	s64 msg_number;
+	s64 put;
+
+	DBUG_ON(notify_type == XPC_N_CALL && func == NULL);
+
+	if (XPC_MSG_SIZE(payload_size) > ch->entry_size)
+		return xpPayloadTooBig;
+
+	xpc_msgqueue_ref(ch);
+
+	if (ch->flags & XPC_C_DISCONNECTING) {
+		ret = ch->reason;
+		goto out_1;
+	}
+	if (!(ch->flags & XPC_C_CONNECTED)) {
+		ret = xpNotConnected;
+		goto out_1;
+	}
+
+	ret = xpc_allocate_msg_sn2(ch, flags, &msg);
+	if (ret != xpSuccess)
+		goto out_1;
+
+	msg_number = msg->number;
+
+	if (notify_type != 0) {
+		/*
+		 * Tell the remote side to send an ACK interrupt when the
+		 * message has been delivered.
+		 */
+		msg->flags |= XPC_M_SN2_INTERRUPT;
+
+		atomic_inc(&ch->n_to_notify);
+
+		notify = &ch_sn2->notify_queue[msg_number % ch->local_nentries];
+		notify->func = func;
+		notify->key = key;
+		notify->type = notify_type;
+
+		/* ??? Is a mb() needed here? */
+
+		if (ch->flags & XPC_C_DISCONNECTING) {
+			/*
+			 * An error occurred between our last error check and
+			 * this one. We will try to clear the type field from
+			 * the notify entry. If we succeed then
+			 * xpc_disconnect_channel() didn't already process
+			 * the notify entry.
+			 */
+			if (cmpxchg(&notify->type, notify_type, 0) ==
+			    notify_type) {
+				atomic_dec(&ch->n_to_notify);
+				ret = ch->reason;
+			}
+			goto out_1;
+		}
+	}
+
+	memcpy(&msg->payload, payload, payload_size);
+
+	msg->flags |= XPC_M_SN2_READY;
+
+	/*
+	 * The preceding store of msg->flags must occur before the following
+	 * load of local_GP->put.
+	 */
+	mb();
+
+	/* see if the message is next in line to be sent, if so send it */
+
+	put = ch_sn2->local_GP->put;
+	if (put == msg_number)
+		xpc_send_msgs_sn2(ch, put);
+
+out_1:
+	xpc_msgqueue_deref(ch);
+	return ret;
+}
+
+/*
+ * Now we actually acknowledge the messages that have been delivered and ack'd
+ * by advancing the cached remote message queue's Get value and if requested
+ * send a chctl msgrequest to the message sender's partition.
+ *
+ * If a message has XPC_M_SN2_INTERRUPT set, send an interrupt to the partition
+ * that sent the message.
+ */
+static void
+xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags)
+{
+	struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2;
+	struct xpc_msg_sn2 *msg;
+	s64 get = initial_get + 1;
+	int send_msgrequest = 0;
+
+	while (1) {
+
+		while (1) {
+			if (get == ch_sn2->w_local_GP.get)
+				break;
+
+			msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->
+						     remote_msgqueue + (get %
+						     ch->remote_nentries) *
+						     ch->entry_size);
+
+			if (!(msg->flags & XPC_M_SN2_DONE))
+				break;
+
+			msg_flags |= msg->flags;
+			get++;
+		}
+
+		if (get == initial_get) {
+			/* nothing's changed */
+			break;
+		}
+
+		if (cmpxchg_rel(&ch_sn2->local_GP->get, initial_get, get) !=
+		    initial_get) {
+			/* someone else beat us to it */
+			DBUG_ON(ch_sn2->local_GP->get <= initial_get);
+			break;
+		}
+
+		/* we just set the new value of local_GP->get */
+
+		dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, "
+			"channel=%d\n", get, ch->partid, ch->number);
+
+		send_msgrequest = (msg_flags & XPC_M_SN2_INTERRUPT);
+
+		/*
+		 * We need to ensure that the message referenced by
+		 * local_GP->get is not XPC_M_SN2_DONE or that local_GP->get
+		 * equals w_local_GP.get, so we'll go have a look.
+		 */
+		initial_get = get;
+	}
+
+	if (send_msgrequest)
+		xpc_send_chctl_msgrequest_sn2(ch);
+}
+
+static void
+xpc_received_payload_sn2(struct xpc_channel *ch, void *payload)
+{
+	struct xpc_msg_sn2 *msg;
+	s64 msg_number;
+	s64 get;
+
+	msg = container_of(payload, struct xpc_msg_sn2, payload);
+	msg_number = msg->number;
+
+	dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n",
+		(void *)msg, msg_number, ch->partid, ch->number);
+
+	DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) !=
+		msg_number % ch->remote_nentries);
+	DBUG_ON(msg->flags & XPC_M_SN2_DONE);
+
+	msg->flags |= XPC_M_SN2_DONE;
+
+	/*
+	 * The preceding store of msg->flags must occur before the following
+	 * load of local_GP->get.
+	 */
+	mb();
+
+	/*
+	 * See if this message is next in line to be acknowledged as having
+	 * been delivered.
+	 */
+	get = ch->sn.sn2.local_GP->get;
+	if (get == msg_number)
+		xpc_acknowledge_msgs_sn2(ch, get, msg->flags);
+}
+
+int
+xpc_init_sn2(void)
+{
+	int ret;
+	size_t buf_size;
+
+	xpc_setup_partitions_sn = xpc_setup_partitions_sn_sn2;
+	xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2;
+	xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_sn2;
+	xpc_increment_heartbeat = xpc_increment_heartbeat_sn2;
+	xpc_offline_heartbeat = xpc_offline_heartbeat_sn2;
+	xpc_online_heartbeat = xpc_online_heartbeat_sn2;
+	xpc_heartbeat_init = xpc_heartbeat_init_sn2;
+	xpc_heartbeat_exit = xpc_heartbeat_exit_sn2;
+	xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_sn2;
+
+	xpc_request_partition_activation = xpc_request_partition_activation_sn2;
+	xpc_request_partition_reactivation =
+	    xpc_request_partition_reactivation_sn2;
+	xpc_request_partition_deactivation =
+	    xpc_request_partition_deactivation_sn2;
+	xpc_cancel_partition_deactivation_request =
+	    xpc_cancel_partition_deactivation_request_sn2;
+
+	xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2;
+	xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_sn2;
+	xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_sn2;
+	xpc_make_first_contact = xpc_make_first_contact_sn2;
+
+	xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_sn2;
+	xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_sn2;
+	xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2;
+	xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2;
+	xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2;
+
+	xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2;
+
+	xpc_setup_msg_structures = xpc_setup_msg_structures_sn2;
+	xpc_teardown_msg_structures = xpc_teardown_msg_structures_sn2;
+
+	xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2;
+	xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2;
+	xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2;
+	xpc_get_deliverable_payload = xpc_get_deliverable_payload_sn2;
+
+	xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_sn2;
+	xpc_indicate_partition_disengaged =
+	    xpc_indicate_partition_disengaged_sn2;
+	xpc_partition_engaged = xpc_partition_engaged_sn2;
+	xpc_any_partition_engaged = xpc_any_partition_engaged_sn2;
+	xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_sn2;
+
+	xpc_send_payload = xpc_send_payload_sn2;
+	xpc_received_payload = xpc_received_payload_sn2;
+
+	if (offsetof(struct xpc_msg_sn2, payload) > XPC_MSG_HDR_MAX_SIZE) {
+		dev_err(xpc_part, "header portion of struct xpc_msg_sn2 is "
+			"larger than %d\n", XPC_MSG_HDR_MAX_SIZE);
+		return -E2BIG;
+	}
+
+	buf_size = max(XPC_RP_VARS_SIZE,
+		       XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES_SN2);
+	xpc_remote_copy_buffer_sn2 = xpc_kmalloc_cacheline_aligned(buf_size,
+								   GFP_KERNEL,
+					      &xpc_remote_copy_buffer_base_sn2);
+	if (xpc_remote_copy_buffer_sn2 == NULL) {
+		dev_err(xpc_part, "can't get memory for remote copy buffer\n");
+		return -ENOMEM;
+	}
+
+	/* open up protections for IPI and [potentially] amo operations */
+	xpc_allow_IPI_ops_sn2();
+	xpc_allow_amo_ops_shub_wars_1_1_sn2();
+
+	/*
+	 * This is safe to do before the xpc_hb_checker thread has started
+	 * because the handler releases a wait queue.  If an interrupt is
+	 * received before the thread is waiting, it will not go to sleep,
+	 * but rather immediately process the interrupt.
+	 */
+	ret = request_irq(SGI_XPC_ACTIVATE, xpc_handle_activate_IRQ_sn2, 0,
+			  "xpc hb", NULL);
+	if (ret != 0) {
+		dev_err(xpc_part, "can't register ACTIVATE IRQ handler, "
+			"errno=%d\n", -ret);
+		xpc_disallow_IPI_ops_sn2();
+		kfree(xpc_remote_copy_buffer_base_sn2);
+	}
+	return ret;
+}
+
+void
+xpc_exit_sn2(void)
+{
+	free_irq(SGI_XPC_ACTIVATE, NULL);
+	xpc_disallow_IPI_ops_sn2();
+	kfree(xpc_remote_copy_buffer_base_sn2);
+}
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
new file mode 100644
index 0000000..1ac694c
--- /dev/null
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -0,0 +1,1443 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+/*
+ * Cross Partition Communication (XPC) uv-based functions.
+ *
+ *     Architecture specific implementation of common functions.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <asm/uv/uv_hub.h>
+#include "../sgi-gru/gru.h"
+#include "../sgi-gru/grukservices.h"
+#include "xpc.h"
+
+static atomic64_t xpc_heartbeat_uv;
+static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
+
+#define XPC_ACTIVATE_MSG_SIZE_UV	(1 * GRU_CACHE_LINE_BYTES)
+#define XPC_NOTIFY_MSG_SIZE_UV		(2 * GRU_CACHE_LINE_BYTES)
+
+#define XPC_ACTIVATE_MQ_SIZE_UV	(4 * XP_MAX_NPARTITIONS_UV * \
+				 XPC_ACTIVATE_MSG_SIZE_UV)
+#define XPC_NOTIFY_MQ_SIZE_UV	(4 * XP_MAX_NPARTITIONS_UV * \
+				 XPC_NOTIFY_MSG_SIZE_UV)
+
+static void *xpc_activate_mq_uv;
+static void *xpc_notify_mq_uv;
+
+static int
+xpc_setup_partitions_sn_uv(void)
+{
+	short partid;
+	struct xpc_partition_uv *part_uv;
+
+	for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) {
+		part_uv = &xpc_partitions[partid].sn.uv;
+
+		spin_lock_init(&part_uv->flags_lock);
+		part_uv->remote_act_state = XPC_P_AS_INACTIVE;
+	}
+	return 0;
+}
+
+static void *
+xpc_create_gru_mq_uv(unsigned int mq_size, int cpuid, unsigned int irq,
+		     irq_handler_t irq_handler)
+{
+	int ret;
+	int nid;
+	int mq_order;
+	struct page *page;
+	void *mq;
+
+	nid = cpu_to_node(cpuid);
+	mq_order = get_order(mq_size);
+	page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE,
+				mq_order);
+	if (page == NULL) {
+		dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to alloc %d "
+			"bytes of memory on nid=%d for GRU mq\n", mq_size, nid);
+		return NULL;
+	}
+
+	mq = page_address(page);
+	ret = gru_create_message_queue(mq, mq_size);
+	if (ret != 0) {
+		dev_err(xpc_part, "gru_create_message_queue() returned "
+			"error=%d\n", ret);
+		free_pages((unsigned long)mq, mq_order);
+		return NULL;
+	}
+
+	/* !!! Need to do some other things to set up IRQ */
+
+	ret = request_irq(irq, irq_handler, 0, "xpc", NULL);
+	if (ret != 0) {
+		dev_err(xpc_part, "request_irq(irq=%d) returned error=%d\n",
+			irq, ret);
+		free_pages((unsigned long)mq, mq_order);
+		return NULL;
+	}
+
+	/* !!! enable generation of irq when GRU mq op occurs to this mq */
+
+	/* ??? allow other partitions to access GRU mq? */
+
+	return mq;
+}
+
+static void
+xpc_destroy_gru_mq_uv(void *mq, unsigned int mq_size, unsigned int irq)
+{
+	/* ??? disallow other partitions to access GRU mq? */
+
+	/* !!! disable generation of irq when GRU mq op occurs to this mq */
+
+	free_irq(irq, NULL);
+
+	free_pages((unsigned long)mq, get_order(mq_size));
+}
+
+static enum xp_retval
+xpc_send_gru_msg(unsigned long mq_gpa, void *msg, size_t msg_size)
+{
+	enum xp_retval xp_ret;
+	int ret;
+
+	while (1) {
+		ret = gru_send_message_gpa(mq_gpa, msg, msg_size);
+		if (ret == MQE_OK) {
+			xp_ret = xpSuccess;
+			break;
+		}
+
+		if (ret == MQE_QUEUE_FULL) {
+			dev_dbg(xpc_chan, "gru_send_message_gpa() returned "
+				"error=MQE_QUEUE_FULL\n");
+			/* !!! handle QLimit reached; delay & try again */
+			/* ??? Do we add a limit to the number of retries? */
+			(void)msleep_interruptible(10);
+		} else if (ret == MQE_CONGESTION) {
+			dev_dbg(xpc_chan, "gru_send_message_gpa() returned "
+				"error=MQE_CONGESTION\n");
+			/* !!! handle LB Overflow; simply try again */
+			/* ??? Do we add a limit to the number of retries? */
+		} else {
+			/* !!! Currently this is MQE_UNEXPECTED_CB_ERR */
+			dev_err(xpc_chan, "gru_send_message_gpa() returned "
+				"error=%d\n", ret);
+			xp_ret = xpGruSendMqError;
+			break;
+		}
+	}
+	return xp_ret;
+}
+
+static void
+xpc_process_activate_IRQ_rcvd_uv(void)
+{
+	unsigned long irq_flags;
+	short partid;
+	struct xpc_partition *part;
+	u8 act_state_req;
+
+	DBUG_ON(xpc_activate_IRQ_rcvd == 0);
+
+	spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+	for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) {
+		part = &xpc_partitions[partid];
+
+		if (part->sn.uv.act_state_req == 0)
+			continue;
+
+		xpc_activate_IRQ_rcvd--;
+		BUG_ON(xpc_activate_IRQ_rcvd < 0);
+
+		act_state_req = part->sn.uv.act_state_req;
+		part->sn.uv.act_state_req = 0;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		if (act_state_req == XPC_P_ASR_ACTIVATE_UV) {
+			if (part->act_state == XPC_P_AS_INACTIVE)
+				xpc_activate_partition(part);
+			else if (part->act_state == XPC_P_AS_DEACTIVATING)
+				XPC_DEACTIVATE_PARTITION(part, xpReactivating);
+
+		} else if (act_state_req == XPC_P_ASR_REACTIVATE_UV) {
+			if (part->act_state == XPC_P_AS_INACTIVE)
+				xpc_activate_partition(part);
+			else
+				XPC_DEACTIVATE_PARTITION(part, xpReactivating);
+
+		} else if (act_state_req == XPC_P_ASR_DEACTIVATE_UV) {
+			XPC_DEACTIVATE_PARTITION(part, part->sn.uv.reason);
+
+		} else {
+			BUG();
+		}
+
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (xpc_activate_IRQ_rcvd == 0)
+			break;
+	}
+	spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+}
+
+static void
+xpc_handle_activate_mq_msg_uv(struct xpc_partition *part,
+			      struct xpc_activate_mq_msghdr_uv *msg_hdr,
+			      int *wakeup_hb_checker)
+{
+	unsigned long irq_flags;
+	struct xpc_partition_uv *part_uv = &part->sn.uv;
+	struct xpc_openclose_args *args;
+
+	part_uv->remote_act_state = msg_hdr->act_state;
+
+	switch (msg_hdr->type) {
+	case XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV:
+		/* syncing of remote_act_state was just done above */
+		break;
+
+	case XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV: {
+		struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
+
+		msg = container_of(msg_hdr,
+				   struct xpc_activate_mq_msg_heartbeat_req_uv,
+				   hdr);
+		part_uv->heartbeat = msg->heartbeat;
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV: {
+		struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
+
+		msg = container_of(msg_hdr,
+				   struct xpc_activate_mq_msg_heartbeat_req_uv,
+				   hdr);
+		part_uv->heartbeat = msg->heartbeat;
+
+		spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+		part_uv->flags |= XPC_P_HEARTBEAT_OFFLINE_UV;
+		spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV: {
+		struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
+
+		msg = container_of(msg_hdr,
+				   struct xpc_activate_mq_msg_heartbeat_req_uv,
+				   hdr);
+		part_uv->heartbeat = msg->heartbeat;
+
+		spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+		part_uv->flags &= ~XPC_P_HEARTBEAT_OFFLINE_UV;
+		spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV: {
+		struct xpc_activate_mq_msg_activate_req_uv *msg;
+
+		/*
+		 * ??? Do we deal here with ts_jiffies being different
+		 * ??? if act_state != XPC_P_AS_INACTIVE instead of
+		 * ??? below?
+		 */
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_activate_req_uv, hdr);
+
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (part_uv->act_state_req == 0)
+			xpc_activate_IRQ_rcvd++;
+		part_uv->act_state_req = XPC_P_ASR_ACTIVATE_UV;
+		part->remote_rp_pa = msg->rp_gpa; /* !!! _pa is _gpa */
+		part->remote_rp_ts_jiffies = msg_hdr->rp_ts_jiffies;
+		part_uv->remote_activate_mq_gpa = msg->activate_mq_gpa;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		(*wakeup_hb_checker)++;
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV: {
+		struct xpc_activate_mq_msg_deactivate_req_uv *msg;
+
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_deactivate_req_uv, hdr);
+
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (part_uv->act_state_req == 0)
+			xpc_activate_IRQ_rcvd++;
+		part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV;
+		part_uv->reason = msg->reason;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		(*wakeup_hb_checker)++;
+		return;
+	}
+	case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV: {
+		struct xpc_activate_mq_msg_chctl_closerequest_uv *msg;
+
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_chctl_closerequest_uv,
+				   hdr);
+		args = &part->remote_openclose_args[msg->ch_number];
+		args->reason = msg->reason;
+
+		spin_lock_irqsave(&part->chctl_lock, irq_flags);
+		part->chctl.flags[msg->ch_number] |= XPC_CHCTL_CLOSEREQUEST;
+		spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+		xpc_wakeup_channel_mgr(part);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV: {
+		struct xpc_activate_mq_msg_chctl_closereply_uv *msg;
+
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_chctl_closereply_uv,
+				   hdr);
+
+		spin_lock_irqsave(&part->chctl_lock, irq_flags);
+		part->chctl.flags[msg->ch_number] |= XPC_CHCTL_CLOSEREPLY;
+		spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+		xpc_wakeup_channel_mgr(part);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV: {
+		struct xpc_activate_mq_msg_chctl_openrequest_uv *msg;
+
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_chctl_openrequest_uv,
+				   hdr);
+		args = &part->remote_openclose_args[msg->ch_number];
+		args->entry_size = msg->entry_size;
+		args->local_nentries = msg->local_nentries;
+
+		spin_lock_irqsave(&part->chctl_lock, irq_flags);
+		part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENREQUEST;
+		spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+		xpc_wakeup_channel_mgr(part);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV: {
+		struct xpc_activate_mq_msg_chctl_openreply_uv *msg;
+
+		msg = container_of(msg_hdr, struct
+				   xpc_activate_mq_msg_chctl_openreply_uv, hdr);
+		args = &part->remote_openclose_args[msg->ch_number];
+		args->remote_nentries = msg->remote_nentries;
+		args->local_nentries = msg->local_nentries;
+		args->local_msgqueue_pa = msg->local_notify_mq_gpa;
+
+		spin_lock_irqsave(&part->chctl_lock, irq_flags);
+		part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENREPLY;
+		spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+		xpc_wakeup_channel_mgr(part);
+		break;
+	}
+	case XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV:
+		spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+		part_uv->flags |= XPC_P_ENGAGED_UV;
+		spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+		break;
+
+	case XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV:
+		spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+		part_uv->flags &= ~XPC_P_ENGAGED_UV;
+		spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+		break;
+
+	default:
+		dev_err(xpc_part, "received unknown activate_mq msg type=%d "
+			"from partition=%d\n", msg_hdr->type, XPC_PARTID(part));
+
+		/* get hb checker to deactivate from the remote partition */
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (part_uv->act_state_req == 0)
+			xpc_activate_IRQ_rcvd++;
+		part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV;
+		part_uv->reason = xpBadMsgType;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		(*wakeup_hb_checker)++;
+		return;
+	}
+
+	if (msg_hdr->rp_ts_jiffies != part->remote_rp_ts_jiffies &&
+	    part->remote_rp_ts_jiffies != 0) {
+		/*
+		 * ??? Does what we do here need to be sensitive to
+		 * ??? act_state or remote_act_state?
+		 */
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (part_uv->act_state_req == 0)
+			xpc_activate_IRQ_rcvd++;
+		part_uv->act_state_req = XPC_P_ASR_REACTIVATE_UV;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		(*wakeup_hb_checker)++;
+	}
+}
+
+static irqreturn_t
+xpc_handle_activate_IRQ_uv(int irq, void *dev_id)
+{
+	struct xpc_activate_mq_msghdr_uv *msg_hdr;
+	short partid;
+	struct xpc_partition *part;
+	int wakeup_hb_checker = 0;
+
+	while ((msg_hdr = gru_get_next_message(xpc_activate_mq_uv)) != NULL) {
+
+		partid = msg_hdr->partid;
+		if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) {
+			dev_err(xpc_part, "xpc_handle_activate_IRQ_uv() "
+				"received invalid partid=0x%x in message\n",
+				partid);
+		} else {
+			part = &xpc_partitions[partid];
+			if (xpc_part_ref(part)) {
+				xpc_handle_activate_mq_msg_uv(part, msg_hdr,
+							    &wakeup_hb_checker);
+				xpc_part_deref(part);
+			}
+		}
+
+		gru_free_message(xpc_activate_mq_uv, msg_hdr);
+	}
+
+	if (wakeup_hb_checker)
+		wake_up_interruptible(&xpc_activate_IRQ_wq);
+
+	return IRQ_HANDLED;
+}
+
+static enum xp_retval
+xpc_send_activate_IRQ_uv(struct xpc_partition *part, void *msg, size_t msg_size,
+			 int msg_type)
+{
+	struct xpc_activate_mq_msghdr_uv *msg_hdr = msg;
+
+	DBUG_ON(msg_size > XPC_ACTIVATE_MSG_SIZE_UV);
+
+	msg_hdr->type = msg_type;
+	msg_hdr->partid = XPC_PARTID(part);
+	msg_hdr->act_state = part->act_state;
+	msg_hdr->rp_ts_jiffies = xpc_rsvd_page->ts_jiffies;
+
+	/* ??? Is holding a spin_lock (ch->lock) during this call a bad idea? */
+	return xpc_send_gru_msg(part->sn.uv.remote_activate_mq_gpa, msg,
+				msg_size);
+}
+
+static void
+xpc_send_activate_IRQ_part_uv(struct xpc_partition *part, void *msg,
+			      size_t msg_size, int msg_type)
+{
+	enum xp_retval ret;
+
+	ret = xpc_send_activate_IRQ_uv(part, msg, msg_size, msg_type);
+	if (unlikely(ret != xpSuccess))
+		XPC_DEACTIVATE_PARTITION(part, ret);
+}
+
+static void
+xpc_send_activate_IRQ_ch_uv(struct xpc_channel *ch, unsigned long *irq_flags,
+			 void *msg, size_t msg_size, int msg_type)
+{
+	struct xpc_partition *part = &xpc_partitions[ch->number];
+	enum xp_retval ret;
+
+	ret = xpc_send_activate_IRQ_uv(part, msg, msg_size, msg_type);
+	if (unlikely(ret != xpSuccess)) {
+		if (irq_flags != NULL)
+			spin_unlock_irqrestore(&ch->lock, *irq_flags);
+
+		XPC_DEACTIVATE_PARTITION(part, ret);
+
+		if (irq_flags != NULL)
+			spin_lock_irqsave(&ch->lock, *irq_flags);
+	}
+}
+
+static void
+xpc_send_local_activate_IRQ_uv(struct xpc_partition *part, int act_state_req)
+{
+	unsigned long irq_flags;
+	struct xpc_partition_uv *part_uv = &part->sn.uv;
+
+	/*
+	 * !!! Make our side think that the remote parition sent an activate
+	 * !!! message our way by doing what the activate IRQ handler would
+	 * !!! do had one really been sent.
+	 */
+
+	spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+	if (part_uv->act_state_req == 0)
+		xpc_activate_IRQ_rcvd++;
+	part_uv->act_state_req = act_state_req;
+	spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+	wake_up_interruptible(&xpc_activate_IRQ_wq);
+}
+
+static enum xp_retval
+xpc_get_partition_rsvd_page_pa_uv(void *buf, u64 *cookie, unsigned long *rp_pa,
+				  size_t *len)
+{
+	/* !!! call the UV version of sn_partition_reserved_page_pa() */
+	return xpUnsupported;
+}
+
+static int
+xpc_setup_rsvd_page_sn_uv(struct xpc_rsvd_page *rp)
+{
+	rp->sn.activate_mq_gpa = uv_gpa(xpc_activate_mq_uv);
+	return 0;
+}
+
+static void
+xpc_send_heartbeat_uv(int msg_type)
+{
+	short partid;
+	struct xpc_partition *part;
+	struct xpc_activate_mq_msg_heartbeat_req_uv msg;
+
+	/*
+	 * !!! On uv we're broadcasting a heartbeat message every 5 seconds.
+	 * !!! Whereas on sn2 we're bte_copy'ng the heartbeat info every 20
+	 * !!! seconds. This is an increase in numalink traffic.
+	 * ??? Is this good?
+	 */
+
+	msg.heartbeat = atomic64_inc_return(&xpc_heartbeat_uv);
+
+	partid = find_first_bit(xpc_heartbeating_to_mask_uv,
+				XP_MAX_NPARTITIONS_UV);
+
+	while (partid < XP_MAX_NPARTITIONS_UV) {
+		part = &xpc_partitions[partid];
+
+		xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+					      msg_type);
+
+		partid = find_next_bit(xpc_heartbeating_to_mask_uv,
+				       XP_MAX_NPARTITIONS_UV, partid + 1);
+	}
+}
+
+static void
+xpc_increment_heartbeat_uv(void)
+{
+	xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV);
+}
+
+static void
+xpc_offline_heartbeat_uv(void)
+{
+	xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+}
+
+static void
+xpc_online_heartbeat_uv(void)
+{
+	xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV);
+}
+
+static void
+xpc_heartbeat_init_uv(void)
+{
+	atomic64_set(&xpc_heartbeat_uv, 0);
+	bitmap_zero(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
+	xpc_heartbeating_to_mask = &xpc_heartbeating_to_mask_uv[0];
+}
+
+static void
+xpc_heartbeat_exit_uv(void)
+{
+	xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+}
+
+static enum xp_retval
+xpc_get_remote_heartbeat_uv(struct xpc_partition *part)
+{
+	struct xpc_partition_uv *part_uv = &part->sn.uv;
+	enum xp_retval ret = xpNoHeartbeat;
+
+	if (part_uv->remote_act_state != XPC_P_AS_INACTIVE &&
+	    part_uv->remote_act_state != XPC_P_AS_DEACTIVATING) {
+
+		if (part_uv->heartbeat != part->last_heartbeat ||
+		    (part_uv->flags & XPC_P_HEARTBEAT_OFFLINE_UV)) {
+
+			part->last_heartbeat = part_uv->heartbeat;
+			ret = xpSuccess;
+		}
+	}
+	return ret;
+}
+
+static void
+xpc_request_partition_activation_uv(struct xpc_rsvd_page *remote_rp,
+				    unsigned long remote_rp_gpa, int nasid)
+{
+	short partid = remote_rp->SAL_partid;
+	struct xpc_partition *part = &xpc_partitions[partid];
+	struct xpc_activate_mq_msg_activate_req_uv msg;
+
+	part->remote_rp_pa = remote_rp_gpa; /* !!! _pa here is really _gpa */
+	part->remote_rp_ts_jiffies = remote_rp->ts_jiffies;
+	part->sn.uv.remote_activate_mq_gpa = remote_rp->sn.activate_mq_gpa;
+
+	/*
+	 * ??? Is it a good idea to make this conditional on what is
+	 * ??? potentially stale state information?
+	 */
+	if (part->sn.uv.remote_act_state == XPC_P_AS_INACTIVE) {
+		msg.rp_gpa = uv_gpa(xpc_rsvd_page);
+		msg.activate_mq_gpa = xpc_rsvd_page->sn.activate_mq_gpa;
+		xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+					   XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV);
+	}
+
+	if (part->act_state == XPC_P_AS_INACTIVE)
+		xpc_send_local_activate_IRQ_uv(part, XPC_P_ASR_ACTIVATE_UV);
+}
+
+static void
+xpc_request_partition_reactivation_uv(struct xpc_partition *part)
+{
+	xpc_send_local_activate_IRQ_uv(part, XPC_P_ASR_ACTIVATE_UV);
+}
+
+static void
+xpc_request_partition_deactivation_uv(struct xpc_partition *part)
+{
+	struct xpc_activate_mq_msg_deactivate_req_uv msg;
+
+	/*
+	 * ??? Is it a good idea to make this conditional on what is
+	 * ??? potentially stale state information?
+	 */
+	if (part->sn.uv.remote_act_state != XPC_P_AS_DEACTIVATING &&
+	    part->sn.uv.remote_act_state != XPC_P_AS_INACTIVE) {
+
+		msg.reason = part->reason;
+		xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+					 XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV);
+	}
+}
+
+static void
+xpc_cancel_partition_deactivation_request_uv(struct xpc_partition *part)
+{
+	/* nothing needs to be done */
+	return;
+}
+
+static void
+xpc_init_fifo_uv(struct xpc_fifo_head_uv *head)
+{
+	head->first = NULL;
+	head->last = NULL;
+	spin_lock_init(&head->lock);
+	head->n_entries = 0;
+}
+
+static void *
+xpc_get_fifo_entry_uv(struct xpc_fifo_head_uv *head)
+{
+	unsigned long irq_flags;
+	struct xpc_fifo_entry_uv *first;
+
+	spin_lock_irqsave(&head->lock, irq_flags);
+	first = head->first;
+	if (head->first != NULL) {
+		head->first = first->next;
+		if (head->first == NULL)
+			head->last = NULL;
+	}
+	head->n_entries++;
+	spin_unlock_irqrestore(&head->lock, irq_flags);
+	first->next = NULL;
+	return first;
+}
+
+static void
+xpc_put_fifo_entry_uv(struct xpc_fifo_head_uv *head,
+		      struct xpc_fifo_entry_uv *last)
+{
+	unsigned long irq_flags;
+
+	last->next = NULL;
+	spin_lock_irqsave(&head->lock, irq_flags);
+	if (head->last != NULL)
+		head->last->next = last;
+	else
+		head->first = last;
+	head->last = last;
+	head->n_entries--;
+	BUG_ON(head->n_entries < 0);
+	spin_unlock_irqrestore(&head->lock, irq_flags);
+}
+
+static int
+xpc_n_of_fifo_entries_uv(struct xpc_fifo_head_uv *head)
+{
+	return head->n_entries;
+}
+
+/*
+ * Setup the channel structures that are uv specific.
+ */
+static enum xp_retval
+xpc_setup_ch_structures_sn_uv(struct xpc_partition *part)
+{
+	struct xpc_channel_uv *ch_uv;
+	int ch_number;
+
+	for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
+		ch_uv = &part->channels[ch_number].sn.uv;
+
+		xpc_init_fifo_uv(&ch_uv->msg_slot_free_list);
+		xpc_init_fifo_uv(&ch_uv->recv_msg_list);
+	}
+
+	return xpSuccess;
+}
+
+/*
+ * Teardown the channel structures that are uv specific.
+ */
+static void
+xpc_teardown_ch_structures_sn_uv(struct xpc_partition *part)
+{
+	/* nothing needs to be done */
+	return;
+}
+
+static enum xp_retval
+xpc_make_first_contact_uv(struct xpc_partition *part)
+{
+	struct xpc_activate_mq_msg_uv msg;
+
+	/*
+	 * We send a sync msg to get the remote partition's remote_act_state
+	 * updated to our current act_state which at this point should
+	 * be XPC_P_AS_ACTIVATING.
+	 */
+	xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+				      XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV);
+
+	while (part->sn.uv.remote_act_state != XPC_P_AS_ACTIVATING) {
+
+		dev_dbg(xpc_part, "waiting to make first contact with "
+			"partition %d\n", XPC_PARTID(part));
+
+		/* wait a 1/4 of a second or so */
+		(void)msleep_interruptible(250);
+
+		if (part->act_state == XPC_P_AS_DEACTIVATING)
+			return part->reason;
+	}
+
+	return xpSuccess;
+}
+
+static u64
+xpc_get_chctl_all_flags_uv(struct xpc_partition *part)
+{
+	unsigned long irq_flags;
+	union xpc_channel_ctl_flags chctl;
+
+	spin_lock_irqsave(&part->chctl_lock, irq_flags);
+	chctl = part->chctl;
+	if (chctl.all_flags != 0)
+		part->chctl.all_flags = 0;
+
+	spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+	return chctl.all_flags;
+}
+
+static enum xp_retval
+xpc_allocate_send_msg_slot_uv(struct xpc_channel *ch)
+{
+	struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+	struct xpc_send_msg_slot_uv *msg_slot;
+	unsigned long irq_flags;
+	int nentries;
+	int entry;
+	size_t nbytes;
+
+	for (nentries = ch->local_nentries; nentries > 0; nentries--) {
+		nbytes = nentries * sizeof(struct xpc_send_msg_slot_uv);
+		ch_uv->send_msg_slots = kzalloc(nbytes, GFP_KERNEL);
+		if (ch_uv->send_msg_slots == NULL)
+			continue;
+
+		for (entry = 0; entry < nentries; entry++) {
+			msg_slot = &ch_uv->send_msg_slots[entry];
+
+			msg_slot->msg_slot_number = entry;
+			xpc_put_fifo_entry_uv(&ch_uv->msg_slot_free_list,
+					      &msg_slot->next);
+		}
+
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		if (nentries < ch->local_nentries)
+			ch->local_nentries = nentries;
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+		return xpSuccess;
+	}
+
+	return xpNoMemory;
+}
+
+static enum xp_retval
+xpc_allocate_recv_msg_slot_uv(struct xpc_channel *ch)
+{
+	struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+	struct xpc_notify_mq_msg_uv *msg_slot;
+	unsigned long irq_flags;
+	int nentries;
+	int entry;
+	size_t nbytes;
+
+	for (nentries = ch->remote_nentries; nentries > 0; nentries--) {
+		nbytes = nentries * ch->entry_size;
+		ch_uv->recv_msg_slots = kzalloc(nbytes, GFP_KERNEL);
+		if (ch_uv->recv_msg_slots == NULL)
+			continue;
+
+		for (entry = 0; entry < nentries; entry++) {
+			msg_slot = ch_uv->recv_msg_slots + entry *
+			    ch->entry_size;
+
+			msg_slot->hdr.msg_slot_number = entry;
+		}
+
+		spin_lock_irqsave(&ch->lock, irq_flags);
+		if (nentries < ch->remote_nentries)
+			ch->remote_nentries = nentries;
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+		return xpSuccess;
+	}
+
+	return xpNoMemory;
+}
+
+/*
+ * Allocate msg_slots associated with the channel.
+ */
+static enum xp_retval
+xpc_setup_msg_structures_uv(struct xpc_channel *ch)
+{
+	static enum xp_retval ret;
+	struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+
+	DBUG_ON(ch->flags & XPC_C_SETUP);
+
+	ret = xpc_allocate_send_msg_slot_uv(ch);
+	if (ret == xpSuccess) {
+
+		ret = xpc_allocate_recv_msg_slot_uv(ch);
+		if (ret != xpSuccess) {
+			kfree(ch_uv->send_msg_slots);
+			xpc_init_fifo_uv(&ch_uv->msg_slot_free_list);
+		}
+	}
+	return ret;
+}
+
+/*
+ * Free up msg_slots and clear other stuff that were setup for the specified
+ * channel.
+ */
+static void
+xpc_teardown_msg_structures_uv(struct xpc_channel *ch)
+{
+	struct xpc_channel_uv *ch_uv = &ch->sn.uv;
+
+	DBUG_ON(!spin_is_locked(&ch->lock));
+
+	ch_uv->remote_notify_mq_gpa = 0;
+
+	if (ch->flags & XPC_C_SETUP) {
+		xpc_init_fifo_uv(&ch_uv->msg_slot_free_list);
+		kfree(ch_uv->send_msg_slots);
+		xpc_init_fifo_uv(&ch_uv->recv_msg_list);
+		kfree(ch_uv->recv_msg_slots);
+	}
+}
+
+static void
+xpc_send_chctl_closerequest_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_activate_mq_msg_chctl_closerequest_uv msg;
+
+	msg.ch_number = ch->number;
+	msg.reason = ch->reason;
+	xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+				    XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV);
+}
+
+static void
+xpc_send_chctl_closereply_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_activate_mq_msg_chctl_closereply_uv msg;
+
+	msg.ch_number = ch->number;
+	xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+				    XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV);
+}
+
+static void
+xpc_send_chctl_openrequest_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_activate_mq_msg_chctl_openrequest_uv msg;
+
+	msg.ch_number = ch->number;
+	msg.entry_size = ch->entry_size;
+	msg.local_nentries = ch->local_nentries;
+	xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+				    XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV);
+}
+
+static void
+xpc_send_chctl_openreply_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+	struct xpc_activate_mq_msg_chctl_openreply_uv msg;
+
+	msg.ch_number = ch->number;
+	msg.local_nentries = ch->local_nentries;
+	msg.remote_nentries = ch->remote_nentries;
+	msg.local_notify_mq_gpa = uv_gpa(xpc_notify_mq_uv);
+	xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+				    XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV);
+}
+
+static void
+xpc_send_chctl_local_msgrequest_uv(struct xpc_partition *part, int ch_number)
+{
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&part->chctl_lock, irq_flags);
+	part->chctl.flags[ch_number] |= XPC_CHCTL_MSGREQUEST;
+	spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+	xpc_wakeup_channel_mgr(part);
+}
+
+static void
+xpc_save_remote_msgqueue_pa_uv(struct xpc_channel *ch,
+			       unsigned long msgqueue_pa)
+{
+	ch->sn.uv.remote_notify_mq_gpa = msgqueue_pa;
+}
+
+static void
+xpc_indicate_partition_engaged_uv(struct xpc_partition *part)
+{
+	struct xpc_activate_mq_msg_uv msg;
+
+	xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+				      XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV);
+}
+
+static void
+xpc_indicate_partition_disengaged_uv(struct xpc_partition *part)
+{
+	struct xpc_activate_mq_msg_uv msg;
+
+	xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
+				      XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV);
+}
+
+static void
+xpc_assume_partition_disengaged_uv(short partid)
+{
+	struct xpc_partition_uv *part_uv = &xpc_partitions[partid].sn.uv;
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+	part_uv->flags &= ~XPC_P_ENGAGED_UV;
+	spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+}
+
+static int
+xpc_partition_engaged_uv(short partid)
+{
+	return (xpc_partitions[partid].sn.uv.flags & XPC_P_ENGAGED_UV) != 0;
+}
+
+static int
+xpc_any_partition_engaged_uv(void)
+{
+	struct xpc_partition_uv *part_uv;
+	short partid;
+
+	for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) {
+		part_uv = &xpc_partitions[partid].sn.uv;
+		if ((part_uv->flags & XPC_P_ENGAGED_UV) != 0)
+			return 1;
+	}
+	return 0;
+}
+
+static enum xp_retval
+xpc_allocate_msg_slot_uv(struct xpc_channel *ch, u32 flags,
+			 struct xpc_send_msg_slot_uv **address_of_msg_slot)
+{
+	enum xp_retval ret;
+	struct xpc_send_msg_slot_uv *msg_slot;
+	struct xpc_fifo_entry_uv *entry;
+
+	while (1) {
+		entry = xpc_get_fifo_entry_uv(&ch->sn.uv.msg_slot_free_list);
+		if (entry != NULL)
+			break;
+
+		if (flags & XPC_NOWAIT)
+			return xpNoWait;
+
+		ret = xpc_allocate_msg_wait(ch);
+		if (ret != xpInterrupted && ret != xpTimeout)
+			return ret;
+	}
+
+	msg_slot = container_of(entry, struct xpc_send_msg_slot_uv, next);
+	*address_of_msg_slot = msg_slot;
+	return xpSuccess;
+}
+
+static void
+xpc_free_msg_slot_uv(struct xpc_channel *ch,
+		     struct xpc_send_msg_slot_uv *msg_slot)
+{
+	xpc_put_fifo_entry_uv(&ch->sn.uv.msg_slot_free_list, &msg_slot->next);
+
+	/* wakeup anyone waiting for a free msg slot */
+	if (atomic_read(&ch->n_on_msg_allocate_wq) > 0)
+		wake_up(&ch->msg_allocate_wq);
+}
+
+static void
+xpc_notify_sender_uv(struct xpc_channel *ch,
+		     struct xpc_send_msg_slot_uv *msg_slot,
+		     enum xp_retval reason)
+{
+	xpc_notify_func func = msg_slot->func;
+
+	if (func != NULL && cmpxchg(&msg_slot->func, func, NULL) == func) {
+
+		atomic_dec(&ch->n_to_notify);
+
+		dev_dbg(xpc_chan, "msg_slot->func() called, msg_slot=0x%p "
+			"msg_slot_number=%d partid=%d channel=%d\n", msg_slot,
+			msg_slot->msg_slot_number, ch->partid, ch->number);
+
+		func(reason, ch->partid, ch->number, msg_slot->key);
+
+		dev_dbg(xpc_chan, "msg_slot->func() returned, msg_slot=0x%p "
+			"msg_slot_number=%d partid=%d channel=%d\n", msg_slot,
+			msg_slot->msg_slot_number, ch->partid, ch->number);
+	}
+}
+
+static void
+xpc_handle_notify_mq_ack_uv(struct xpc_channel *ch,
+			    struct xpc_notify_mq_msg_uv *msg)
+{
+	struct xpc_send_msg_slot_uv *msg_slot;
+	int entry = msg->hdr.msg_slot_number % ch->local_nentries;
+
+	msg_slot = &ch->sn.uv.send_msg_slots[entry];
+
+	BUG_ON(msg_slot->msg_slot_number != msg->hdr.msg_slot_number);
+	msg_slot->msg_slot_number += ch->local_nentries;
+
+	if (msg_slot->func != NULL)
+		xpc_notify_sender_uv(ch, msg_slot, xpMsgDelivered);
+
+	xpc_free_msg_slot_uv(ch, msg_slot);
+}
+
+static void
+xpc_handle_notify_mq_msg_uv(struct xpc_partition *part,
+			    struct xpc_notify_mq_msg_uv *msg)
+{
+	struct xpc_partition_uv *part_uv = &part->sn.uv;
+	struct xpc_channel *ch;
+	struct xpc_channel_uv *ch_uv;
+	struct xpc_notify_mq_msg_uv *msg_slot;
+	unsigned long irq_flags;
+	int ch_number = msg->hdr.ch_number;
+
+	if (unlikely(ch_number >= part->nchannels)) {
+		dev_err(xpc_part, "xpc_handle_notify_IRQ_uv() received invalid "
+			"channel number=0x%x in message from partid=%d\n",
+			ch_number, XPC_PARTID(part));
+
+		/* get hb checker to deactivate from the remote partition */
+		spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+		if (part_uv->act_state_req == 0)
+			xpc_activate_IRQ_rcvd++;
+		part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV;
+		part_uv->reason = xpBadChannelNumber;
+		spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags);
+
+		wake_up_interruptible(&xpc_activate_IRQ_wq);
+		return;
+	}
+
+	ch = &part->channels[ch_number];
+	xpc_msgqueue_ref(ch);
+
+	if (!(ch->flags & XPC_C_CONNECTED)) {
+		xpc_msgqueue_deref(ch);
+		return;
+	}
+
+	/* see if we're really dealing with an ACK for a previously sent msg */
+	if (msg->hdr.size == 0) {
+		xpc_handle_notify_mq_ack_uv(ch, msg);
+		xpc_msgqueue_deref(ch);
+		return;
+	}
+
+	/* we're dealing with a normal message sent via the notify_mq */
+	ch_uv = &ch->sn.uv;
+
+	msg_slot = (struct xpc_notify_mq_msg_uv *)((u64)ch_uv->recv_msg_slots +
+		    (msg->hdr.msg_slot_number % ch->remote_nentries) *
+		    ch->entry_size);
+
+	BUG_ON(msg->hdr.msg_slot_number != msg_slot->hdr.msg_slot_number);
+	BUG_ON(msg_slot->hdr.size != 0);
+
+	memcpy(msg_slot, msg, msg->hdr.size);
+
+	xpc_put_fifo_entry_uv(&ch_uv->recv_msg_list, &msg_slot->hdr.u.next);
+
+	if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) {
+		/*
+		 * If there is an existing idle kthread get it to deliver
+		 * the payload, otherwise we'll have to get the channel mgr
+		 * for this partition to create a kthread to do the delivery.
+		 */
+		if (atomic_read(&ch->kthreads_idle) > 0)
+			wake_up_nr(&ch->idle_wq, 1);
+		else
+			xpc_send_chctl_local_msgrequest_uv(part, ch->number);
+	}
+	xpc_msgqueue_deref(ch);
+}
+
+static irqreturn_t
+xpc_handle_notify_IRQ_uv(int irq, void *dev_id)
+{
+	struct xpc_notify_mq_msg_uv *msg;
+	short partid;
+	struct xpc_partition *part;
+
+	while ((msg = gru_get_next_message(xpc_notify_mq_uv)) != NULL) {
+
+		partid = msg->hdr.partid;
+		if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) {
+			dev_err(xpc_part, "xpc_handle_notify_IRQ_uv() received "
+				"invalid partid=0x%x in message\n", partid);
+		} else {
+			part = &xpc_partitions[partid];
+
+			if (xpc_part_ref(part)) {
+				xpc_handle_notify_mq_msg_uv(part, msg);
+				xpc_part_deref(part);
+			}
+		}
+
+		gru_free_message(xpc_notify_mq_uv, msg);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int
+xpc_n_of_deliverable_payloads_uv(struct xpc_channel *ch)
+{
+	return xpc_n_of_fifo_entries_uv(&ch->sn.uv.recv_msg_list);
+}
+
+static void
+xpc_process_msg_chctl_flags_uv(struct xpc_partition *part, int ch_number)
+{
+	struct xpc_channel *ch = &part->channels[ch_number];
+	int ndeliverable_payloads;
+
+	xpc_msgqueue_ref(ch);
+
+	ndeliverable_payloads = xpc_n_of_deliverable_payloads_uv(ch);
+
+	if (ndeliverable_payloads > 0 &&
+	    (ch->flags & XPC_C_CONNECTED) &&
+	    (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)) {
+
+		xpc_activate_kthreads(ch, ndeliverable_payloads);
+	}
+
+	xpc_msgqueue_deref(ch);
+}
+
+static enum xp_retval
+xpc_send_payload_uv(struct xpc_channel *ch, u32 flags, void *payload,
+		    u16 payload_size, u8 notify_type, xpc_notify_func func,
+		    void *key)
+{
+	enum xp_retval ret = xpSuccess;
+	struct xpc_send_msg_slot_uv *msg_slot = NULL;
+	struct xpc_notify_mq_msg_uv *msg;
+	u8 msg_buffer[XPC_NOTIFY_MSG_SIZE_UV];
+	size_t msg_size;
+
+	DBUG_ON(notify_type != XPC_N_CALL);
+
+	msg_size = sizeof(struct xpc_notify_mq_msghdr_uv) + payload_size;
+	if (msg_size > ch->entry_size)
+		return xpPayloadTooBig;
+
+	xpc_msgqueue_ref(ch);
+
+	if (ch->flags & XPC_C_DISCONNECTING) {
+		ret = ch->reason;
+		goto out_1;
+	}
+	if (!(ch->flags & XPC_C_CONNECTED)) {
+		ret = xpNotConnected;
+		goto out_1;
+	}
+
+	ret = xpc_allocate_msg_slot_uv(ch, flags, &msg_slot);
+	if (ret != xpSuccess)
+		goto out_1;
+
+	if (func != NULL) {
+		atomic_inc(&ch->n_to_notify);
+
+		msg_slot->key = key;
+		wmb(); /* a non-NULL func must hit memory after the key */
+		msg_slot->func = func;
+
+		if (ch->flags & XPC_C_DISCONNECTING) {
+			ret = ch->reason;
+			goto out_2;
+		}
+	}
+
+	msg = (struct xpc_notify_mq_msg_uv *)&msg_buffer;
+	msg->hdr.partid = xp_partition_id;
+	msg->hdr.ch_number = ch->number;
+	msg->hdr.size = msg_size;
+	msg->hdr.msg_slot_number = msg_slot->msg_slot_number;
+	memcpy(&msg->payload, payload, payload_size);
+
+	ret = xpc_send_gru_msg(ch->sn.uv.remote_notify_mq_gpa, msg, msg_size);
+	if (ret == xpSuccess)
+		goto out_1;
+
+	XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret);
+out_2:
+	if (func != NULL) {
+		/*
+		 * Try to NULL the msg_slot's func field. If we fail, then
+		 * xpc_notify_senders_of_disconnect_uv() beat us to it, in which
+		 * case we need to pretend we succeeded to send the message
+		 * since the user will get a callout for the disconnect error
+		 * by xpc_notify_senders_of_disconnect_uv(), and to also get an
+		 * error returned here will confuse them. Additionally, since
+		 * in this case the channel is being disconnected we don't need
+		 * to put the the msg_slot back on the free list.
+		 */
+		if (cmpxchg(&msg_slot->func, func, NULL) != func) {
+			ret = xpSuccess;
+			goto out_1;
+		}
+
+		msg_slot->key = NULL;
+		atomic_dec(&ch->n_to_notify);
+	}
+	xpc_free_msg_slot_uv(ch, msg_slot);
+out_1:
+	xpc_msgqueue_deref(ch);
+	return ret;
+}
+
+/*
+ * Tell the callers of xpc_send_notify() that the status of their payloads
+ * is unknown because the channel is now disconnecting.
+ *
+ * We don't worry about putting these msg_slots on the free list since the
+ * msg_slots themselves are about to be kfree'd.
+ */
+static void
+xpc_notify_senders_of_disconnect_uv(struct xpc_channel *ch)
+{
+	struct xpc_send_msg_slot_uv *msg_slot;
+	int entry;
+
+	DBUG_ON(!(ch->flags & XPC_C_DISCONNECTING));
+
+	for (entry = 0; entry < ch->local_nentries; entry++) {
+
+		if (atomic_read(&ch->n_to_notify) == 0)
+			break;
+
+		msg_slot = &ch->sn.uv.send_msg_slots[entry];
+		if (msg_slot->func != NULL)
+			xpc_notify_sender_uv(ch, msg_slot, ch->reason);
+	}
+}
+
+/*
+ * Get the next deliverable message's payload.
+ */
+static void *
+xpc_get_deliverable_payload_uv(struct xpc_channel *ch)
+{
+	struct xpc_fifo_entry_uv *entry;
+	struct xpc_notify_mq_msg_uv *msg;
+	void *payload = NULL;
+
+	if (!(ch->flags & XPC_C_DISCONNECTING)) {
+		entry = xpc_get_fifo_entry_uv(&ch->sn.uv.recv_msg_list);
+		if (entry != NULL) {
+			msg = container_of(entry, struct xpc_notify_mq_msg_uv,
+					   hdr.u.next);
+			payload = &msg->payload;
+		}
+	}
+	return payload;
+}
+
+static void
+xpc_received_payload_uv(struct xpc_channel *ch, void *payload)
+{
+	struct xpc_notify_mq_msg_uv *msg;
+	enum xp_retval ret;
+
+	msg = container_of(payload, struct xpc_notify_mq_msg_uv, payload);
+
+	/* return an ACK to the sender of this message */
+
+	msg->hdr.partid = xp_partition_id;
+	msg->hdr.size = 0;	/* size of zero indicates this is an ACK */
+
+	ret = xpc_send_gru_msg(ch->sn.uv.remote_notify_mq_gpa, msg,
+			       sizeof(struct xpc_notify_mq_msghdr_uv));
+	if (ret != xpSuccess)
+		XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret);
+
+	msg->hdr.msg_slot_number += ch->remote_nentries;
+}
+
+int
+xpc_init_uv(void)
+{
+	xpc_setup_partitions_sn = xpc_setup_partitions_sn_uv;
+	xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv;
+	xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv;
+	xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_uv;
+	xpc_increment_heartbeat = xpc_increment_heartbeat_uv;
+	xpc_offline_heartbeat = xpc_offline_heartbeat_uv;
+	xpc_online_heartbeat = xpc_online_heartbeat_uv;
+	xpc_heartbeat_init = xpc_heartbeat_init_uv;
+	xpc_heartbeat_exit = xpc_heartbeat_exit_uv;
+	xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_uv;
+
+	xpc_request_partition_activation = xpc_request_partition_activation_uv;
+	xpc_request_partition_reactivation =
+	    xpc_request_partition_reactivation_uv;
+	xpc_request_partition_deactivation =
+	    xpc_request_partition_deactivation_uv;
+	xpc_cancel_partition_deactivation_request =
+	    xpc_cancel_partition_deactivation_request_uv;
+
+	xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_uv;
+	xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_uv;
+
+	xpc_make_first_contact = xpc_make_first_contact_uv;
+
+	xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_uv;
+	xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_uv;
+	xpc_send_chctl_closereply = xpc_send_chctl_closereply_uv;
+	xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_uv;
+	xpc_send_chctl_openreply = xpc_send_chctl_openreply_uv;
+
+	xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv;
+
+	xpc_setup_msg_structures = xpc_setup_msg_structures_uv;
+	xpc_teardown_msg_structures = xpc_teardown_msg_structures_uv;
+
+	xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_uv;
+	xpc_indicate_partition_disengaged =
+	    xpc_indicate_partition_disengaged_uv;
+	xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_uv;
+	xpc_partition_engaged = xpc_partition_engaged_uv;
+	xpc_any_partition_engaged = xpc_any_partition_engaged_uv;
+
+	xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv;
+	xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv;
+	xpc_send_payload = xpc_send_payload_uv;
+	xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv;
+	xpc_get_deliverable_payload = xpc_get_deliverable_payload_uv;
+	xpc_received_payload = xpc_received_payload_uv;
+
+	if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) {
+		dev_err(xpc_part, "xpc_notify_mq_msghdr_uv is larger than %d\n",
+			XPC_MSG_HDR_MAX_SIZE);
+		return -E2BIG;
+	}
+
+	/* ??? The cpuid argument's value is 0, is that what we want? */
+	/* !!! The irq argument's value isn't correct. */
+	xpc_activate_mq_uv = xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, 0, 0,
+						  xpc_handle_activate_IRQ_uv);
+	if (xpc_activate_mq_uv == NULL)
+		return -ENOMEM;
+
+	/* ??? The cpuid argument's value is 0, is that what we want? */
+	/* !!! The irq argument's value isn't correct. */
+	xpc_notify_mq_uv = xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, 0, 0,
+						xpc_handle_notify_IRQ_uv);
+	if (xpc_notify_mq_uv == NULL) {
+		/* !!! The irq argument's value isn't correct. */
+		xpc_destroy_gru_mq_uv(xpc_activate_mq_uv,
+				      XPC_ACTIVATE_MQ_SIZE_UV, 0);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+void
+xpc_exit_uv(void)
+{
+	/* !!! The irq argument's value isn't correct. */
+	xpc_destroy_gru_mq_uv(xpc_notify_mq_uv, XPC_NOTIFY_MQ_SIZE_UV, 0);
+
+	/* !!! The irq argument's value isn't correct. */
+	xpc_destroy_gru_mq_uv(xpc_activate_mq_uv, XPC_ACTIVATE_MQ_SIZE_UV, 0);
+}
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index 822dc8e..71513b3a 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -21,21 +21,8 @@
  */
 
 #include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/smp.h>
-#include <linux/string.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/io.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/atomic.h>
 #include "xp.h"
 
 /*
@@ -57,7 +44,7 @@ struct xpnet_message {
 	u16 version;		/* Version for this message */
 	u16 embedded_bytes;	/* #of bytes embedded in XPC message */
 	u32 magic;		/* Special number indicating this is xpnet */
-	u64 buf_pa;		/* phys address of buffer to retrieve */
+	unsigned long buf_pa;	/* phys address of buffer to retrieve */
 	u32 size;		/* #of bytes in buffer */
 	u8 leadin_ignore;	/* #of bytes to ignore at the beginning */
 	u8 tailout_ignore;	/* #of bytes to ignore at the end */
@@ -70,11 +57,10 @@ struct xpnet_message {
  *
  * XPC expects each message to exist in an individual cacheline.
  */
-#define XPNET_MSG_SIZE		(L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET)
+#define XPNET_MSG_SIZE		XPC_MSG_PAYLOAD_MAX_SIZE
 #define XPNET_MSG_DATA_MAX	\
-		(XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data))
-#define XPNET_MSG_ALIGNED_SIZE	(L1_CACHE_ALIGN(XPNET_MSG_SIZE))
-#define XPNET_MSG_NENTRIES	(PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE)
+		(XPNET_MSG_SIZE - offsetof(struct xpnet_message, data))
+#define XPNET_MSG_NENTRIES	(PAGE_SIZE / XPC_MSG_MAX_SIZE)
 
 #define XPNET_MAX_KTHREADS	(XPNET_MSG_NENTRIES + 1)
 #define XPNET_MAX_IDLE_KTHREADS	(XPNET_MSG_NENTRIES + 1)
@@ -105,7 +91,6 @@ struct xpnet_message {
  * then be released.
  */
 struct xpnet_pending_msg {
-	struct list_head free_list;
 	struct sk_buff *skb;
 	atomic_t use_count;
 };
@@ -121,7 +106,7 @@ struct net_device *xpnet_device;
  * When we are notified of other partitions activating, we add them to
  * our bitmask of partitions to which we broadcast.
  */
-static u64 xpnet_broadcast_partitions;
+static unsigned long *xpnet_broadcast_partitions;
 /* protect above */
 static DEFINE_SPINLOCK(xpnet_broadcast_lock);
 
@@ -141,16 +126,13 @@ static DEFINE_SPINLOCK(xpnet_broadcast_lock);
 #define XPNET_DEF_MTU (0x8000UL)
 
 /*
- * The partition id is encapsulated in the MAC address.  The following
- * define locates the octet the partid is in.
+ * The partid is encapsulated in the MAC address beginning in the following
+ * octet and it consists of two octets.
  */
-#define XPNET_PARTID_OCTET	1
-#define XPNET_LICENSE_OCTET	2
+#define XPNET_PARTID_OCTET	2
+
+/* Define the XPNET debug device structures to be used with dev_dbg() et al */
 
-/*
- * Define the XPNET debug device structure that is to be used with dev_dbg(),
- * dev_err(), dev_warn(), and dev_info().
- */
 struct device_driver xpnet_dbg_name = {
 	.name = "xpnet"
 };
@@ -169,7 +151,8 @@ static void
 xpnet_receive(short partid, int channel, struct xpnet_message *msg)
 {
 	struct sk_buff *skb;
-	bte_result_t bret;
+	void *dst;
+	enum xp_retval ret;
 	struct xpnet_dev_private *priv =
 	    (struct xpnet_dev_private *)xpnet_device->priv;
 
@@ -201,7 +184,7 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg)
 
 	/*
 	 * The allocated skb has some reserved space.
-	 * In order to use bte_copy, we need to get the
+	 * In order to use xp_remote_memcpy(), we need to get the
 	 * skb->data pointer moved forward.
 	 */
 	skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data &
@@ -226,26 +209,21 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg)
 		skb_copy_to_linear_data(skb, &msg->data,
 					(size_t)msg->embedded_bytes);
 	} else {
+		dst = (void *)((u64)skb->data & ~(L1_CACHE_BYTES - 1));
 		dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t"
-			"bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa,
-			(void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
-			msg->size);
-
-		bret = bte_copy(msg->buf_pa,
-				__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
-				msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
+			"xp_remote_memcpy(0x%p, 0x%p, %hu)\n", dst,
+					  (void *)msg->buf_pa, msg->size);
 
-		if (bret != BTE_SUCCESS) {
+		ret = xp_remote_memcpy(xp_pa(dst), msg->buf_pa, msg->size);
+		if (ret != xpSuccess) {
 			/*
-			 * >>> Need better way of cleaning skb.  Currently skb
-			 * >>> appears in_use and we can't just call
-			 * >>> dev_kfree_skb.
+			 * !!! Need better way of cleaning skb.  Currently skb
+			 * !!! appears in_use and we can't just call
+			 * !!! dev_kfree_skb.
 			 */
-			dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned "
-				"error=0x%x\n", (void *)msg->buf_pa,
-				(void *)__pa((u64)skb->data &
-					     ~(L1_CACHE_BYTES - 1)),
-				msg->size, bret);
+			dev_err(xpnet, "xp_remote_memcpy(0x%p, 0x%p, 0x%hx) "
+				"returned error=0x%x\n", dst,
+				(void *)msg->buf_pa, msg->size, ret);
 
 			xpc_received(partid, channel, (void *)msg);
 
@@ -285,9 +263,7 @@ static void
 xpnet_connection_activity(enum xp_retval reason, short partid, int channel,
 			  void *data, void *key)
 {
-	long bp;
-
-	DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
+	DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
 	DBUG_ON(channel != XPC_NET_CHANNEL);
 
 	switch (reason) {
@@ -299,31 +275,28 @@ xpnet_connection_activity(enum xp_retval reason, short partid, int channel,
 
 	case xpConnected:	/* connection completed to a partition */
 		spin_lock_bh(&xpnet_broadcast_lock);
-		xpnet_broadcast_partitions |= 1UL << (partid - 1);
-		bp = xpnet_broadcast_partitions;
+		__set_bit(partid, xpnet_broadcast_partitions);
 		spin_unlock_bh(&xpnet_broadcast_lock);
 
 		netif_carrier_on(xpnet_device);
 
-		dev_dbg(xpnet, "%s connection created to partition %d; "
-			"xpnet_broadcast_partitions=0x%lx\n",
-			xpnet_device->name, partid, bp);
+		dev_dbg(xpnet, "%s connected to partition %d\n",
+			xpnet_device->name, partid);
 		break;
 
 	default:
 		spin_lock_bh(&xpnet_broadcast_lock);
-		xpnet_broadcast_partitions &= ~(1UL << (partid - 1));
-		bp = xpnet_broadcast_partitions;
+		__clear_bit(partid, xpnet_broadcast_partitions);
 		spin_unlock_bh(&xpnet_broadcast_lock);
 
-		if (bp == 0)
+		if (bitmap_empty((unsigned long *)xpnet_broadcast_partitions,
+				 xp_max_npartitions)) {
 			netif_carrier_off(xpnet_device);
+		}
 
-		dev_dbg(xpnet, "%s disconnected from partition %d; "
-			"xpnet_broadcast_partitions=0x%lx\n",
-			xpnet_device->name, partid, bp);
+		dev_dbg(xpnet, "%s disconnected from partition %d\n",
+			xpnet_device->name, partid);
 		break;
-
 	}
 }
 
@@ -334,8 +307,10 @@ xpnet_dev_open(struct net_device *dev)
 
 	dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, "
 		"%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity,
-		XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS,
-		XPNET_MAX_IDLE_KTHREADS);
+		(unsigned long)XPNET_MSG_SIZE,
+		(unsigned long)XPNET_MSG_NENTRIES,
+		(unsigned long)XPNET_MAX_KTHREADS,
+		(unsigned long)XPNET_MAX_IDLE_KTHREADS);
 
 	ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL,
 			  XPNET_MSG_SIZE, XPNET_MSG_NENTRIES,
@@ -426,35 +401,74 @@ xpnet_send_completed(enum xp_retval reason, short partid, int channel,
 	}
 }
 
+static void
+xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg,
+	   u64 start_addr, u64 end_addr, u16 embedded_bytes, int dest_partid)
+{
+	u8 msg_buffer[XPNET_MSG_SIZE];
+	struct xpnet_message *msg = (struct xpnet_message *)&msg_buffer;
+	u16 msg_size = sizeof(struct xpnet_message);
+	enum xp_retval ret;
+
+	msg->embedded_bytes = embedded_bytes;
+	if (unlikely(embedded_bytes != 0)) {
+		msg->version = XPNET_VERSION_EMBED;
+		dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
+			&msg->data, skb->data, (size_t)embedded_bytes);
+		skb_copy_from_linear_data(skb, &msg->data,
+					  (size_t)embedded_bytes);
+		msg_size += embedded_bytes - 1;
+	} else {
+		msg->version = XPNET_VERSION;
+	}
+	msg->magic = XPNET_MAGIC;
+	msg->size = end_addr - start_addr;
+	msg->leadin_ignore = (u64)skb->data - start_addr;
+	msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);
+	msg->buf_pa = xp_pa((void *)start_addr);
+
+	dev_dbg(xpnet, "sending XPC message to %d:%d\n"
+		KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
+		"msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
+		dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
+		msg->leadin_ignore, msg->tailout_ignore);
+
+	atomic_inc(&queued_msg->use_count);
+
+	ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, XPC_NOWAIT, msg,
+			      msg_size, xpnet_send_completed, queued_msg);
+	if (unlikely(ret != xpSuccess))
+		atomic_dec(&queued_msg->use_count);
+}
+
 /*
  * Network layer has formatted a packet (skb) and is ready to place it
  * "on the wire".  Prepare and send an xpnet_message to all partitions
  * which have connected with us and are targets of this packet.
  *
  * MAC-NOTE:  For the XPNET driver, the MAC address contains the
- * destination partition_id.  If the destination partition id word
- * is 0xff, this packet is to broadcast to all partitions.
+ * destination partid.  If the destination partid octets are 0xffff,
+ * this packet is to be broadcast to all connected partitions.
  */
 static int
 xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct xpnet_pending_msg *queued_msg;
-	enum xp_retval ret;
-	struct xpnet_message *msg;
 	u64 start_addr, end_addr;
-	long dp;
-	u8 second_mac_octet;
 	short dest_partid;
-	struct xpnet_dev_private *priv;
-	u16 embedded_bytes;
-
-	priv = (struct xpnet_dev_private *)dev->priv;
+	struct xpnet_dev_private *priv = (struct xpnet_dev_private *)dev->priv;
+	u16 embedded_bytes = 0;
 
 	dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
 		"skb->end=0x%p skb->len=%d\n", (void *)skb->head,
 		(void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
 		skb->len);
 
+	if (skb->data[0] == 0x33) {
+		dev_kfree_skb(skb);
+		return 0;	/* nothing needed to be done */
+	}
+
 	/*
 	 * The xpnet_pending_msg tracks how many outstanding
 	 * xpc_send_notifies are relying on this skb.  When none
@@ -466,7 +480,6 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			 "packet\n", sizeof(struct xpnet_pending_msg));
 
 		priv->stats.tx_errors++;
-
 		return -ENOMEM;
 	}
 
@@ -475,7 +488,6 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb));
 
 	/* calculate how many bytes to embed in the XPC message */
-	embedded_bytes = 0;
 	if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) {
 		/* skb->data does fit so embed */
 		embedded_bytes = skb->len;
@@ -491,82 +503,28 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	atomic_set(&queued_msg->use_count, 1);
 	queued_msg->skb = skb;
 
-	second_mac_octet = skb->data[XPNET_PARTID_OCTET];
-	if (second_mac_octet == 0xff) {
+	if (skb->data[0] == 0xff) {
 		/* we are being asked to broadcast to all partitions */
-		dp = xpnet_broadcast_partitions;
-	} else if (second_mac_octet != 0) {
-		dp = xpnet_broadcast_partitions &
-		    (1UL << (second_mac_octet - 1));
-	} else {
-		/* 0 is an invalid partid.  Ignore */
-		dp = 0;
-	}
-	dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp);
-
-	/*
-	 * If we wanted to allow promiscuous mode to work like an
-	 * unswitched network, this would be a good point to OR in a
-	 * mask of partitions which should be receiving all packets.
-	 */
-
-	/*
-	 * Main send loop.
-	 */
-	for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS;
-	     dest_partid++) {
+		for_each_bit(dest_partid, xpnet_broadcast_partitions,
+			     xp_max_npartitions) {
 
-		if (!(dp & (1UL << (dest_partid - 1)))) {
-			/* not destined for this partition */
-			continue;
+			xpnet_send(skb, queued_msg, start_addr, end_addr,
+				   embedded_bytes, dest_partid);
 		}
+	} else {
+		dest_partid = (short)skb->data[XPNET_PARTID_OCTET + 1];
+		dest_partid |= (short)skb->data[XPNET_PARTID_OCTET + 0] << 8;
 
-		/* remove this partition from the destinations mask */
-		dp &= ~(1UL << (dest_partid - 1));
-
-		/* found a partition to send to */
-
-		ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL,
-				   XPC_NOWAIT, (void **)&msg);
-		if (unlikely(ret != xpSuccess))
-			continue;
-
-		msg->embedded_bytes = embedded_bytes;
-		if (unlikely(embedded_bytes != 0)) {
-			msg->version = XPNET_VERSION_EMBED;
-			dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
-				&msg->data, skb->data, (size_t)embedded_bytes);
-			skb_copy_from_linear_data(skb, &msg->data,
-						  (size_t)embedded_bytes);
-		} else {
-			msg->version = XPNET_VERSION;
-		}
-		msg->magic = XPNET_MAGIC;
-		msg->size = end_addr - start_addr;
-		msg->leadin_ignore = (u64)skb->data - start_addr;
-		msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);
-		msg->buf_pa = __pa(start_addr);
-
-		dev_dbg(xpnet, "sending XPC message to %d:%d\n"
-			KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, "
-			"msg->leadin_ignore=%u, msg->tailout_ignore=%u\n",
-			dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size,
-			msg->leadin_ignore, msg->tailout_ignore);
-
-		atomic_inc(&queued_msg->use_count);
-
-		ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg,
-				      xpnet_send_completed, queued_msg);
-		if (unlikely(ret != xpSuccess)) {
-			atomic_dec(&queued_msg->use_count);
-			continue;
+		if (dest_partid >= 0 &&
+		    dest_partid < xp_max_npartitions &&
+		    test_bit(dest_partid, xpnet_broadcast_partitions) != 0) {
+
+			xpnet_send(skb, queued_msg, start_addr, end_addr,
+				   embedded_bytes, dest_partid);
 		}
 	}
 
 	if (atomic_dec_return(&queued_msg->use_count) == 0) {
-		dev_dbg(xpnet, "no partitions to receive packet destined for "
-			"%d\n", dest_partid);
-
 		dev_kfree_skb(skb);
 		kfree(queued_msg);
 	}
@@ -594,23 +552,28 @@ xpnet_dev_tx_timeout(struct net_device *dev)
 static int __init
 xpnet_init(void)
 {
-	int i;
-	u32 license_num;
-	int result = -ENOMEM;
+	int result;
 
-	if (!ia64_platform_is("sn2"))
+	if (!is_shub() && !is_uv())
 		return -ENODEV;
 
 	dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME);
 
+	xpnet_broadcast_partitions = kzalloc(BITS_TO_LONGS(xp_max_npartitions) *
+					     sizeof(long), GFP_KERNEL);
+	if (xpnet_broadcast_partitions == NULL)
+		return -ENOMEM;
+
 	/*
 	 * use ether_setup() to init the majority of our device
 	 * structure and then override the necessary pieces.
 	 */
 	xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private),
 				    XPNET_DEVICE_NAME, ether_setup);
-	if (xpnet_device == NULL)
+	if (xpnet_device == NULL) {
+		kfree(xpnet_broadcast_partitions);
 		return -ENOMEM;
+	}
 
 	netif_carrier_off(xpnet_device);
 
@@ -628,14 +591,10 @@ xpnet_init(void)
 	 * MAC addresses.  We chose the first octet of the MAC to be unlikely
 	 * to collide with any vendor's officially issued MAC.
 	 */
-	xpnet_device->dev_addr[0] = 0xfe;
-	xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id;
-	license_num = sn_partition_serial_number_val();
-	for (i = 3; i >= 0; i--) {
-		xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] =
-		    license_num & 0xff;
-		license_num = license_num >> 8;
-	}
+	xpnet_device->dev_addr[0] = 0x02;     /* locally administered, no OUI */
+
+	xpnet_device->dev_addr[XPNET_PARTID_OCTET + 1] = xp_partition_id;
+	xpnet_device->dev_addr[XPNET_PARTID_OCTET + 0] = (xp_partition_id >> 8);
 
 	/*
 	 * ether_setup() sets this to a multicast device.  We are
@@ -651,8 +610,10 @@ xpnet_init(void)
 	xpnet_device->features = NETIF_F_NO_CSUM;
 
 	result = register_netdev(xpnet_device);
-	if (result != 0)
+	if (result != 0) {
 		free_netdev(xpnet_device);
+		kfree(xpnet_broadcast_partitions);
+	}
 
 	return result;
 }
@@ -666,8 +627,8 @@ xpnet_exit(void)
 		 xpnet_device[0].name);
 
 	unregister_netdev(xpnet_device);
-
 	free_netdev(xpnet_device);
+	kfree(xpnet_broadcast_partitions);
 }
 
 module_exit(xpnet_exit);
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 8ee7d7b..e4765b7 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -6417,7 +6417,7 @@ static int niu_ethflow_to_class(int flow_type, u64 *class)
 		*class = CLASS_CODE_SCTP_IPV6;
 		break;
 	default:
-		return -1;
+		return 0;
 	}
 
 	return 1;
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 6b2dee0..a834b52 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -1024,7 +1024,7 @@ static int gelic_wl_set_encode(struct net_device *netdev,
 	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
 	struct iw_point *enc = &data->encoding;
 	__u16 flags;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	int key_index, index_specified;
 	int ret = 0;
 
@@ -1097,7 +1097,7 @@ static int gelic_wl_get_encode(struct net_device *netdev,
 {
 	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
 	struct iw_point *enc = &data->encoding;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	unsigned int key_index, index_specified;
 	int ret = 0;
 
@@ -1215,7 +1215,7 @@ static int gelic_wl_set_encodeext(struct net_device *netdev,
 	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
 	__u16 alg;
 	__u16 flags;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	int key_index;
 	int ret = 0;
 
@@ -1303,7 +1303,7 @@ static int gelic_wl_get_encodeext(struct net_device *netdev,
 	struct gelic_wl_info *wl = port_wl(netdev_priv(netdev));
 	struct iw_point *enc = &data->encoding;
 	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	int key_index;
 	int ret = 0;
 	int max_key_len;
@@ -1426,7 +1426,7 @@ static int gelic_wl_priv_set_psk(struct net_device *net_dev,
 {
 	struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev));
 	unsigned int len;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	int ret = 0;
 
 	pr_debug("%s:<- len=%d\n", __func__, data->data.length);
@@ -1467,7 +1467,7 @@ static int gelic_wl_priv_get_psk(struct net_device *net_dev,
 {
 	struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev));
 	char *p;
-	unsigned int irqflag;
+	unsigned long irqflag;
 	unsigned int i;
 
 	pr_debug("%s:<-\n", __func__);
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index d9769c5..ff3fad7 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -43,7 +43,9 @@
 #include <linux/version.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/hardirq.h>
 #include <linux/if.h>
+#include <linux/io.h>
 #include <linux/netdevice.h>
 #include <linux/cache.h>
 #include <linux/pci.h>
@@ -471,9 +473,6 @@ ath5k_pci_probe(struct pci_dev *pdev,
 	/* Set private data */
 	pci_set_drvdata(pdev, hw);
 
-	/* Enable msi for devices that support it */
-	pci_enable_msi(pdev);
-
 	/* Setup interrupt handler */
 	ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
 	if (ret) {
@@ -551,7 +550,6 @@ err_ah:
 err_irq:
 	free_irq(pdev->irq, sc);
 err_free:
-	pci_disable_msi(pdev);
 	ieee80211_free_hw(hw);
 err_map:
 	pci_iounmap(pdev, mem);
@@ -573,7 +571,6 @@ ath5k_pci_remove(struct pci_dev *pdev)
 	ath5k_detach(pdev, hw);
 	ath5k_hw_detach(sc->ah);
 	free_irq(pdev->irq, sc);
-	pci_disable_msi(pdev);
 	pci_iounmap(pdev, sc->iobase);
 	pci_release_region(pdev, 0);
 	pci_disable_device(pdev);
@@ -590,6 +587,9 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	ath5k_led_off(sc);
 
 	ath5k_stop_hw(sc);
+
+	free_irq(pdev->irq, sc);
+	pci_disable_msi(pdev);
 	pci_save_state(pdev);
 	pci_disable_device(pdev);
 	pci_set_power_state(pdev, PCI_D3hot);
@@ -605,15 +605,12 @@ ath5k_pci_resume(struct pci_dev *pdev)
 	struct ath5k_hw *ah = sc->ah;
 	int i, err;
 
-	err = pci_set_power_state(pdev, PCI_D0);
-	if (err)
-		return err;
+	pci_restore_state(pdev);
 
 	err = pci_enable_device(pdev);
 	if (err)
 		return err;
 
-	pci_restore_state(pdev);
 	/*
 	 * Suspend/Resume resets the PCI configuration space, so we have to
 	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
@@ -621,7 +618,17 @@ ath5k_pci_resume(struct pci_dev *pdev)
 	 */
 	pci_write_config_byte(pdev, 0x41, 0);
 
-	ath5k_init(sc);
+	pci_enable_msi(pdev);
+
+	err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
+	if (err) {
+		ATH5K_ERR(sc, "request_irq failed\n");
+		goto err_msi;
+	}
+
+	err = ath5k_init(sc);
+	if (err)
+		goto err_irq;
 	ath5k_led_enable(sc);
 
 	/*
@@ -635,6 +642,12 @@ ath5k_pci_resume(struct pci_dev *pdev)
 		ath5k_hw_reset_key(ah, i);
 
 	return 0;
+err_irq:
+	free_irq(pdev->irq, sc);
+err_msi:
+	pci_disable_msi(pdev);
+	pci_disable_device(pdev);
+	return err;
 }
 #endif /* CONFIG_PM */
 
@@ -1224,7 +1237,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 
 	pktlen = skb->len;
 
-	if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) {
+	if (info->control.hw_key) {
 		keyidx = info->control.hw_key->hw_key_idx;
 		pktlen += info->control.icv_len;
 	}
@@ -1249,6 +1262,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 
 	txq->link = &ds->ds_link;
 	ath5k_hw_tx_start(ah, txq->qnum);
+	mmiowb();
 	spin_unlock_bh(&txq->lock);
 
 	return 0;
@@ -1583,7 +1597,6 @@ ath5k_rx_stop(struct ath5k_softc *sc)
 	ath5k_hw_stop_pcu_recv(ah);	/* disable PCU */
 	ath5k_hw_set_rx_filter(ah, 0);	/* clear recv filter */
 	ath5k_hw_stop_rx_dma(ah);	/* disable DMA engine */
-	mdelay(3);			/* 3ms is long enough for 1 frame */
 
 	ath5k_debug_printrxbuffs(sc, ah);
 
@@ -1682,31 +1695,44 @@ ath5k_tasklet_rx(unsigned long data)
 	struct ath5k_rx_status rs = {};
 	struct sk_buff *skb;
 	struct ath5k_softc *sc = (void *)data;
-	struct ath5k_buf *bf;
+	struct ath5k_buf *bf, *bf_last;
 	struct ath5k_desc *ds;
 	int ret;
 	int hdrlen;
 	int pad;
 
 	spin_lock(&sc->rxbuflock);
+	if (list_empty(&sc->rxbuf)) {
+		ATH5K_WARN(sc, "empty rx buf pool\n");
+		goto unlock;
+	}
+	bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list);
 	do {
 		rxs.flag = 0;
 
-		if (unlikely(list_empty(&sc->rxbuf))) {
-			ATH5K_WARN(sc, "empty rx buf pool\n");
-			break;
-		}
 		bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
 		BUG_ON(bf->skb == NULL);
 		skb = bf->skb;
 		ds = bf->desc;
 
-		/* TODO only one segment */
-		pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr,
-				sc->desc_len, PCI_DMA_FROMDEVICE);
-
-		if (unlikely(ds->ds_link == bf->daddr)) /* this is the end */
-			break;
+		/*
+		 * last buffer must not be freed to ensure proper hardware
+		 * function. When the hardware finishes also a packet next to
+		 * it, we are sure, it doesn't use it anymore and we can go on.
+		 */
+		if (bf_last == bf)
+			bf->flags |= 1;
+		if (bf->flags) {
+			struct ath5k_buf *bf_next = list_entry(bf->list.next,
+					struct ath5k_buf, list);
+			ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc,
+					&rs);
+			if (ret)
+				break;
+			bf->flags &= ~1;
+			/* skip the overwritten one (even status is martian) */
+			goto next;
+		}
 
 		ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
 		if (unlikely(ret == -EINPROGRESS))
@@ -1752,8 +1778,6 @@ ath5k_tasklet_rx(unsigned long data)
 				goto next;
 		}
 accept:
-		pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr,
-				rs.rs_datalen, PCI_DMA_FROMDEVICE);
 		pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
 				PCI_DMA_FROMDEVICE);
 		bf->skb = NULL;
@@ -1816,6 +1840,7 @@ accept:
 next:
 		list_move_tail(&bf->list, &sc->rxbuf);
 	} while (ath5k_rxbuf_setup(sc, bf) == 0);
+unlock:
 	spin_unlock(&sc->rxbuflock);
 }
 
@@ -1840,9 +1865,6 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
 	list_for_each_entry_safe(bf, bf0, &txq->q, list) {
 		ds = bf->desc;
 
-		/* TODO only one segment */
-		pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr,
-				sc->desc_len, PCI_DMA_FROMDEVICE);
 		ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
 		if (unlikely(ret == -EINPROGRESS))
 			break;
@@ -2015,8 +2037,6 @@ ath5k_beacon_send(struct ath5k_softc *sc)
 		ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
 		/* NB: hw still stops DMA, so proceed */
 	}
-	pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, bf->skb->len,
-			PCI_DMA_TODEVICE);
 
 	ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr);
 	ath5k_hw_tx_start(ah, sc->bhalq);
@@ -2240,6 +2260,7 @@ ath5k_init(struct ath5k_softc *sc)
 
 	ret = 0;
 done:
+	mmiowb();
 	mutex_unlock(&sc->lock);
 	return ret;
 }
@@ -2272,6 +2293,7 @@ ath5k_stop_locked(struct ath5k_softc *sc)
 	if (!test_bit(ATH_STAT_INVALID, sc->status)) {
 		ath5k_led_off(sc);
 		ath5k_hw_set_intr(ah, 0);
+		synchronize_irq(sc->pdev->irq);
 	}
 	ath5k_txq_cleanup(sc);
 	if (!test_bit(ATH_STAT_INVALID, sc->status)) {
@@ -2321,9 +2343,13 @@ ath5k_stop_hw(struct ath5k_softc *sc)
 		}
 	}
 	ath5k_txbuf_free(sc, sc->bbuf);
+	mmiowb();
 	mutex_unlock(&sc->lock);
 
 	del_timer_sync(&sc->calib_tim);
+	tasklet_kill(&sc->rxtq);
+	tasklet_kill(&sc->txtq);
+	tasklet_kill(&sc->restq);
 
 	return ret;
 }
@@ -2550,8 +2576,6 @@ ath5k_init_leds(struct ath5k_softc *sc)
 	struct pci_dev *pdev = sc->pdev;
 	char name[ATH5K_LED_MAX_NAME_LEN + 1];
 
-	sc->led_on = 0;  /* active low */
-
 	/*
 	 * Auto-enable soft led processing for IBM cards and for
 	 * 5211 minipci cards.
@@ -2560,11 +2584,13 @@ ath5k_init_leds(struct ath5k_softc *sc)
 	    pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) {
 		__set_bit(ATH_STAT_LEDSOFT, sc->status);
 		sc->led_pin = 0;
+		sc->led_on = 0;  /* active low */
 	}
 	/* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */
 	if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) {
 		__set_bit(ATH_STAT_LEDSOFT, sc->status);
 		sc->led_pin = 1;
+		sc->led_on = 1;  /* active high */
 	}
 	if (!test_bit(ATH_STAT_LEDSOFT, sc->status))
 		goto out;
@@ -2783,6 +2809,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		/* XXX: assoc id is set to 0 for now, mac80211 doesn't have
 		 * a clean way of letting us retrieve this yet. */
 		ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+		mmiowb();
 	}
 
 	if (conf->changed & IEEE80211_IFCC_BEACON &&
@@ -2971,6 +2998,7 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	}
 
 unlock:
+	mmiowb();
 	mutex_unlock(&sc->lock);
 	return ret;
 }
@@ -3032,8 +3060,6 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 
 	ath5k_debug_dump_skb(sc, skb, "BC  ", 1);
 
-	mutex_lock(&sc->lock);
-
 	if (sc->opmode != IEEE80211_IF_TYPE_IBSS) {
 		ret = -EIO;
 		goto end;
@@ -3044,11 +3070,12 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 	ret = ath5k_beacon_setup(sc, sc->bbuf);
 	if (ret)
 		sc->bbuf->skb = NULL;
-	else
+	else {
 		ath5k_beacon_config(sc);
+		mmiowb();
+	}
 
 end:
-	mutex_unlock(&sc->lock);
 	return ret;
 }
 
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h
index 47f414b..d7e03e6 100644
--- a/drivers/net/wireless/ath5k/base.h
+++ b/drivers/net/wireless/ath5k/base.h
@@ -56,7 +56,7 @@
 
 struct ath5k_buf {
 	struct list_head	list;
-	unsigned int		flags;	/* tx descriptor flags */
+	unsigned int		flags;	/* rx descriptor flags */
 	struct ath5k_desc	*desc;	/* virtual addr of desc */
 	dma_addr_t		daddr;	/* physical addr of desc */
 	struct sk_buff		*skb;	/* skbuff for buf */
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
index c6d12c5..7ca87a5 100644
--- a/drivers/net/wireless/ath5k/hw.c
+++ b/drivers/net/wireless/ath5k/hw.c
@@ -1440,6 +1440,7 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 
 		/* Stop queue */
 		ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+		ath5k_hw_reg_read(ah, AR5K_CR);
 	} else {
 		/*
 		 * Schedule TX disable and wait until queue is empty
@@ -1456,6 +1457,8 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 
 		/* Clear register */
 		ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
+		if (pending)
+			return -EBUSY;
 	}
 
 	/* TODO: Check for success else return error */
@@ -1716,6 +1719,7 @@ enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask)
 
 	/* ..re-enable interrupts */
 	ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
+	ath5k_hw_reg_read(ah, AR5K_IER);
 
 	return old_mask;
 }
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index e78319a..3bf3a86 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4645,8 +4645,7 @@ static int b43_wireless_init(struct ssb_device *dev)
 	}
 
 	/* fill hw info */
-	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-		    IEEE80211_HW_RX_INCLUDES_FCS |
+	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
 		    IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
 
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 8d54502..9dda816 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -192,7 +192,7 @@ int b43_generate_txhdr(struct b43_wldev *dev,
 	const struct b43_phy *phy = &dev->phy;
 	const struct ieee80211_hdr *wlhdr =
 	    (const struct ieee80211_hdr *)fragment_data;
-	int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT));
+	int use_encryption = !!info->control.hw_key;
 	__le16 fctl = wlhdr->frame_control;
 	struct ieee80211_rate *fbrate;
 	u8 rate, rate_fb;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index a1b8bf3..2541c81 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3702,8 +3702,7 @@ static int b43legacy_wireless_init(struct ssb_device *dev)
 	}
 
 	/* fill hw info */
-	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-		    IEEE80211_HW_RX_INCLUDES_FCS |
+	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
 		    IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
 	hw->queues = 1; /* FIXME: hardware has more queues */
@@ -3846,10 +3845,10 @@ static int b43legacy_resume(struct ssb_device *dev)
 			goto out;
 		}
 	}
-	mutex_unlock(&wl->mutex);
 
 	b43legacydbg(wl, "Device resumed.\n");
 out:
+	mutex_unlock(&wl->mutex);
 	return err;
 }
 
diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index e969ed8..68e1f8c 100644
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -192,7 +192,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev,
 			       u16 cookie)
 {
 	const struct ieee80211_hdr *wlhdr;
-	int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT));
+	int use_encryption = !!info->control.hw_key;
 	u16 fctl;
 	u8 rate;
 	struct ieee80211_rate *rate_fb;
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index 5bf9e00..c6f886e 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -6442,6 +6442,7 @@ static int ipw2100_resume(struct pci_dev *pci_dev)
 	if (err) {
 		printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
 		       dev->name);
+		mutex_unlock(&priv->action_mutex);
 		return err;
 	}
 	pci_restore_state(pci_dev);
@@ -7146,7 +7147,7 @@ static int ipw2100_wx_get_rate(struct net_device *dev,
 	err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len);
 	if (err) {
 		IPW_DEBUG_WX("failed querying ordinals.\n");
-		return err;
+		goto done;
 	}
 
 	switch (val & TX_RATE_MASK) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index c2a7678..a51e0ea 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -630,7 +630,9 @@ static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv,
 				   struct ieee80211_rx_status *stats)
 {
 	struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data;
+#ifdef CONFIG_IWL3945_LEDS
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
+#endif
 	struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 	struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
 	short len = le16_to_cpu(rx_hdr->len);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index a44188b..e3427c2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -818,8 +818,7 @@ int iwl_setup_mac(struct iwl_priv *priv)
 	hw->rate_control_algorithm = "iwl-4965-rs";
 
 	/* Tell mac80211 our characteristics */
-	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-		    IEEE80211_HW_SIGNAL_DBM |
+	hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
 	/* Default value; 4 EDCA QOS priorities */
 	hw->queues = 4;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 5838480..d6d729e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -68,12 +68,8 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv);
 #endif
 
 #else
-static inline void IWL_DEBUG(int level, const char *fmt, ...)
-{
-}
-static inline void IWL_DEBUG_LIMIT(int level, const char *fmt, ...)
-{
-}
+#define IWL_DEBUG(level, fmt, args...)
+#define IWL_DEBUG_LIMIT(level, fmt, args...)
 #endif				/* CONFIG_IWLWIFI_DEBUG */
 
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index 899d7a2..61250e6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -268,7 +268,9 @@ static int iwl_get_blink_rate(struct iwl_priv *priv)
 	if (tpt < 0) /* wrapparound */
 		tpt = -tpt;
 
-	IWL_DEBUG_LED("tpt %lld current_tpt %lld\n", tpt, current_tpt);
+	IWL_DEBUG_LED("tpt %lld current_tpt %llu\n",
+		(long long)tpt,
+		(unsigned long long)current_tpt);
 	priv->led_tpt = current_tpt;
 
 	if (!priv->allow_blinking)
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index efc750d..5a00ac2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -270,6 +270,7 @@ static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
 static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 				       struct iwl_rx_mem_buffer *rxb)
 {
+#ifdef CONFIG_IWLWIFI_DEBUG
 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 	struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
 
@@ -277,6 +278,7 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 		       scan_notif->scanned_channels,
 		       scan_notif->tsf_low,
 		       scan_notif->tsf_high, scan_notif->status);
+#endif
 
 	/* The HW is no longer scanning */
 	clear_bit(STATUS_SCAN_HW, &priv->status);
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 9b50b10..f72cd0b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -906,7 +906,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	 * first entry */
 	iwl_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
 
-	if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+	if (info->control.hw_key)
 		iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id);
 
 	/* Set up TFD's 2nd entry to point directly to remainder of skb,
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 4a22d3f..7c82ecf 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2667,7 +2667,7 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb)
 	 * first entry */
 	iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
 
-	if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+	if (info->control.hw_key)
 		iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, 0);
 
 	/* Set up TFD's 2nd entry to point directly to remainder of skb,
@@ -7899,8 +7899,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	priv->ibss_beacon = NULL;
 
 	/* Tell mac80211 our characteristics */
-	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-		    IEEE80211_HW_SIGNAL_DBM |
+	hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
 
 	/* 4 EDCA QOS priorities */
diff --git a/drivers/net/wireless/libertas/persistcfg.c b/drivers/net/wireless/libertas/persistcfg.c
index 6d0ff8d..3309a9c 100644
--- a/drivers/net/wireless/libertas/persistcfg.c
+++ b/drivers/net/wireless/libertas/persistcfg.c
@@ -48,7 +48,7 @@ static ssize_t bootflag_get(struct device *dev,
 	if (ret)
 		return ret;
 
-	return snprintf(buf, 12, "0x%x\n", le32_to_cpu(defs.bootflag));
+	return snprintf(buf, 12, "%d\n", le32_to_cpu(defs.bootflag));
 }
 
 /**
@@ -63,8 +63,8 @@ static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%x", &datum);
-	if (ret != 1)
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 1))
 		return -EINVAL;
 
 	*((__le32 *)&cmd.data[0]) = cpu_to_le32(!!datum);
@@ -91,7 +91,7 @@ static ssize_t boottime_get(struct device *dev,
 	if (ret)
 		return ret;
 
-	return snprintf(buf, 12, "0x%x\n", defs.boottime);
+	return snprintf(buf, 12, "%d\n", defs.boottime);
 }
 
 /**
@@ -106,8 +106,8 @@ static ssize_t boottime_set(struct device *dev,
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%x", &datum);
-	if (ret != 1)
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 255))
 		return -EINVAL;
 
 	/* A too small boot time will result in the device booting into
@@ -143,7 +143,7 @@ static ssize_t channel_get(struct device *dev,
 	if (ret)
 		return ret;
 
-	return snprintf(buf, 12, "0x%x\n", le16_to_cpu(defs.channel));
+	return snprintf(buf, 12, "%d\n", le16_to_cpu(defs.channel));
 }
 
 /**
@@ -154,11 +154,11 @@ static ssize_t channel_set(struct device *dev, struct device_attribute *attr,
 {
 	struct lbs_private *priv = to_net_dev(dev)->priv;
 	struct cmd_ds_mesh_config cmd;
-	uint16_t datum;
+	uint32_t datum;
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%hx", &datum);
+	ret = sscanf(buf, "%d", &datum);
 	if (ret != 1 || datum < 1 || datum > 11)
 		return -EINVAL;
 
@@ -274,8 +274,8 @@ static ssize_t protocol_id_set(struct device *dev,
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%x", &datum);
-	if (ret != 1)
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 255))
 		return -EINVAL;
 
 	/* fetch all other Information Element parameters */
@@ -328,8 +328,8 @@ static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr,
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%x", &datum);
-	if (ret != 1)
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 255))
 		return -EINVAL;
 
 	/* fetch all other Information Element parameters */
@@ -382,8 +382,8 @@ static ssize_t capability_set(struct device *dev, struct device_attribute *attr,
 	int ret;
 
 	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%x", &datum);
-	if (ret != 1)
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 255))
 		return -EINVAL;
 
 	/* fetch all other Information Element parameters */
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 5816230..248d31a 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -500,7 +500,7 @@ failed_hw:
 	device_unregister(data->dev);
 failed_drvdata:
 	ieee80211_free_hw(hw);
-	hwsim_radios[i] = 0;
+	hwsim_radios[i] = NULL;
 failed:
 	mac80211_hwsim_free();
 	return err;
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 3558cb2..3078417 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1121,6 +1121,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
 	int pipe = usb_sndbulkpipe(usb_dev, 1);
 	int length;
 	u16 reg;
+	u32 word, len;
 
 	/*
 	 * Add the descriptor in front of the skb.
@@ -1130,6 +1131,17 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
 	skbdesc->desc = entry->skb->data;
 
 	/*
+	 * Adjust the beacon databyte count. The current number is
+	 * calculated before this function gets called, but falsely
+	 * assumes that the descriptor was already present in the SKB.
+	 */
+	rt2x00_desc_read(skbdesc->desc, 0, &word);
+	len  = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
+	len += skbdesc->desc_len;
+	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
+	rt2x00_desc_write(skbdesc->desc, 0, word);
+
+	/*
 	 * Disable beaconing while we are reloading the beacon data,
 	 * otherwise we might be sending out invalid data.
 	 */
@@ -1650,7 +1662,6 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	 * Initialize all hw fields.
 	 */
 	rt2x00dev->hw->flags =
-	    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
 	    IEEE80211_HW_RX_INCLUDES_FCS |
 	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 	    IEEE80211_HW_SIGNAL_DBM;
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 07b03b3..db2dc97 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -108,7 +108,10 @@
 #define SHORT_PIFS		( SIFS + SHORT_SLOT_TIME )
 #define DIFS			( PIFS + SLOT_TIME )
 #define SHORT_DIFS		( SHORT_PIFS + SHORT_SLOT_TIME )
-#define EIFS			( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) )
+#define EIFS			( SIFS + DIFS + \
+				  (8 * (IEEE80211_HEADER + ACK_SIZE)) )
+#define SHORT_EIFS		( SIFS + SHORT_DIFS + \
+				  (8 * (IEEE80211_HEADER + ACK_SIZE)) )
 
 /*
  * Chipset identification
@@ -597,6 +600,7 @@ enum rt2x00_flags {
 	DEVICE_STARTED_SUSPEND,
 	DEVICE_ENABLED_RADIO,
 	DEVICE_DISABLED_RADIO_HW,
+	DEVICE_DIRTY_CONFIG,
 
 	/*
 	 * Driver features
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index f20ca71..3f89516 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -271,7 +271,7 @@ config:
 		libconf.sifs = SIFS;
 		libconf.pifs = short_slot_time ? SHORT_PIFS : PIFS;
 		libconf.difs = short_slot_time ? SHORT_DIFS : DIFS;
-		libconf.eifs = EIFS;
+		libconf.eifs = short_slot_time ? SHORT_EIFS : EIFS;
 	}
 
 	libconf.conf = conf;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 8c93eb8..f42283a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1013,6 +1013,7 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
 	rt2x00dev->intf_associated = 0;
 
 	__set_bit(DEVICE_STARTED, &rt2x00dev->flags);
+	__set_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
 
 	return 0;
 }
@@ -1237,9 +1238,9 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Reconfigure device.
 	 */
-	rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1);
-	if (!rt2x00dev->hw->conf.radio_enabled)
-		rt2x00lib_disable_radio(rt2x00dev);
+	retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf);
+	if (retval)
+		goto exit;
 
 	/*
 	 * Iterator over each active interface to
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index f2c9b0e..c5fb3a72 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -125,13 +125,6 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
 
 /**
- * rt2x00queue_free_skb - free a skb
- * @rt2x00dev: Pointer to &struct rt2x00_dev.
- * @skb: The skb to free.
- */
-void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
-
-/**
  * rt2x00queue_write_tx_frame - Write TX frame to hardware
  * @queue: Queue over which the frame should be send
  * @skb: The skb to send
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index f1dcbaa..c3ee4ec 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -63,7 +63,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 	 */
 	memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
 	rts_info = IEEE80211_SKB_CB(skb);
-	rts_info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+	rts_info->control.hw_key = NULL;
 	rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS;
 	rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT;
 	rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
@@ -83,6 +83,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 				  (struct ieee80211_rts *)(skb->data));
 
 	if (rt2x00queue_write_tx_frame(queue, skb)) {
+		dev_kfree_skb_any(skb);
 		WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
 		return NETDEV_TX_BUSY;
 	}
@@ -96,7 +97,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
 	enum data_queue_qid qid = skb_get_queue_mapping(skb);
-	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
 	struct data_queue *queue;
 	u16 frame_control;
 
@@ -152,18 +152,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		}
 	}
 
-	/*
-	 * XXX: This is as wrong as the old mac80211 code was,
-	 *	due to beacons not getting sequence numbers assigned
-	 *	properly.
-	 */
-	if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
-		if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
-			intf->seqno += 0x10;
-		ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
-		ieee80211hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
-	}
-
 	if (rt2x00queue_write_tx_frame(queue, skb)) {
 		ieee80211_stop_queue(rt2x00dev->hw, qid);
 		return NETDEV_TX_BUSY;
@@ -322,6 +310,7 @@ EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
 int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
+	int force_reconfig;
 
 	/*
 	 * Mac80211 might be calling this function while we are trying
@@ -341,7 +330,17 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
 			rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
 	}
 
-	rt2x00lib_config(rt2x00dev, conf, 0);
+	/*
+	 * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently
+	 * been started and the configuration must be forced upon the hardware.
+	 * Otherwise registers will not be intialized correctly and could
+	 * result in non-working hardware because essential registers aren't
+	 * initialized.
+	 */
+	force_reconfig =
+	    __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
+
+	rt2x00lib_config(rt2x00dev, conf, force_reconfig);
 
 	/*
 	 * Reenable RX only if the radio should be on.
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 7f44203..3b27f6a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -120,6 +120,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
 	struct ieee80211_rate *rate =
 	    ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
@@ -200,6 +201,31 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	}
 
 	/*
+	 * Hardware should insert sequence counter.
+	 * FIXME: We insert a software sequence counter first for
+	 * hardware that doesn't support hardware sequence counting.
+	 *
+	 * This is wrong because beacons are not getting sequence
+	 * numbers assigned properly.
+	 *
+	 * A secondary problem exists for drivers that cannot toggle
+	 * sequence counting per-frame, since those will override the
+	 * sequence counter given by mac80211.
+	 */
+	if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		spin_lock(&intf->lock);
+
+		if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
+			intf->seqno += 0x10;
+		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
+
+		spin_unlock(&intf->lock);
+
+		__set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
+	}
+
+	/*
 	 * PLCP setup
 	 * Length calculation depends on OFDM/CCK rate.
 	 */
@@ -466,9 +492,12 @@ void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev)
 	if (!rt2x00dev->ops->lib->init_rxentry)
 		return;
 
-	for (i = 0; i < queue->limit; i++)
+	for (i = 0; i < queue->limit; i++) {
+		queue->entries[i].flags = 0;
+
 		rt2x00dev->ops->lib->init_rxentry(rt2x00dev,
 						  &queue->entries[i]);
+	}
 }
 
 void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev)
@@ -482,9 +511,12 @@ void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev)
 		if (!rt2x00dev->ops->lib->init_txentry)
 			continue;
 
-		for (i = 0; i < queue->limit; i++)
+		for (i = 0; i < queue->limit; i++) {
+			queue->entries[i].flags = 0;
+
 			rt2x00dev->ops->lib->init_txentry(rt2x00dev,
 							  &queue->entries[i]);
+		}
 	}
 }
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 8945945..a4a8c57 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -199,6 +199,7 @@ struct txdone_entry_desc {
  * @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame.
  * @ENTRY_TXD_CTS_FRAME: This frame is a CTS-to-self frame.
  * @ENTRY_TXD_OFDM_RATE: This frame is send out with an OFDM rate.
+ * @ENTRY_TXD_GENERATE_SEQ: This frame requires sequence counter.
  * @ENTRY_TXD_FIRST_FRAGMENT: This is the first frame.
  * @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment.
  * @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted.
@@ -210,6 +211,7 @@ enum txentry_desc_flags {
 	ENTRY_TXD_RTS_FRAME,
 	ENTRY_TXD_CTS_FRAME,
 	ENTRY_TXD_OFDM_RATE,
+	ENTRY_TXD_GENERATE_SEQ,
 	ENTRY_TXD_FIRST_FRAGMENT,
 	ENTRY_TXD_MORE_FRAG,
 	ENTRY_TXD_REQ_TIMESTAMP,
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 83862e7..933e6cc 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -122,6 +122,38 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);
 
+int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
+					const u8 request, const u8 requesttype,
+					const u16 offset, void *buffer,
+					const u16 buffer_length,
+					const int timeout)
+{
+	int status = 0;
+	unsigned char *tb;
+	u16 off, len, bsize;
+
+	mutex_lock(&rt2x00dev->usb_cache_mutex);
+
+	tb  = buffer;
+	off = offset;
+	len = buffer_length;
+	while (len && !status) {
+		bsize = min_t(u16, CSR_CACHE_SIZE, len);
+		status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request,
+							requesttype, off, tb,
+							bsize, timeout);
+
+		tb  += bsize;
+		len -= bsize;
+		off += bsize;
+	}
+
+	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	return status;
+}
+EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff);
+
 /*
  * TX data handlers.
  */
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index aad794ad..ee3875f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -70,8 +70,7 @@
 /*
  * Cache size
  */
-#define CSR_CACHE_SIZE			8
-#define CSR_CACHE_SIZE_FIRMWARE		64
+#define CSR_CACHE_SIZE			64
 
 /*
  * USB request types.
@@ -172,6 +171,25 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev,
 				   const u16 buffer_length, const int timeout);
 
 /**
+ * rt2x00usb_vendor_request_large_buff - Send register command to device (buffered)
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
+ * @requesttype: Request type &USB_VENDOR_REQUEST_*
+ * @offset: Register start offset to perform action on
+ * @buffer: Buffer where information will be read/written to by device
+ * @buffer_length: Size of &buffer
+ * @timeout: Operation timeout
+ *
+ * This function is used to transfer register data in blocks larger
+ * then CSR_CACHE_SIZE. Use for firmware upload, keys and beacons.
+ */
+int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev,
+					const u8 request, const u8 requesttype,
+					const u16 offset, void *buffer,
+					const u16 buffer_length,
+					const int timeout);
+
+/**
  * rt2x00usb_vendor_request_sw - Send single register command to device
  * @rt2x00dev: Pointer to &struct rt2x00_dev
  * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index f7c1f92..fbe2a65 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1544,7 +1544,8 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
 	rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
 	rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
-	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
+	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
+			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
 	rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
 	rt2x00_desc_write(txd, 1, word);
 
@@ -2278,7 +2279,6 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	 * Initialize all hw fields.
 	 */
 	rt2x00dev->hw->flags =
-	    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
 	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 	    IEEE80211_HW_SIGNAL_DBM;
 	rt2x00dev->hw->extra_tx_headroom = 0;
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index d383735..9761eaa 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -890,9 +890,6 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
 	unsigned int i;
 	int status;
 	u32 reg;
-	const char *ptr = data;
-	char *cache;
-	int buflen;
 
 	/*
 	 * Wait for stable hardware.
@@ -911,31 +908,12 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
 
 	/*
 	 * Write firmware to device.
-	 * We setup a seperate cache for this action,
-	 * since we are going to write larger chunks of data
-	 * then normally used cache size.
 	 */
-	cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL);
-	if (!cache) {
-		ERROR(rt2x00dev, "Failed to allocate firmware cache.\n");
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) {
-		buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE);
-
-		memcpy(cache, ptr, buflen);
-
-		rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
-					 USB_VENDOR_REQUEST_OUT,
-					 FIRMWARE_IMAGE_BASE + i, 0,
-					 cache, buflen,
-					 REGISTER_TIMEOUT32(buflen));
-
-		ptr += buflen;
-	}
-
-	kfree(cache);
+	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+					    USB_VENDOR_REQUEST_OUT,
+					    FIRMWARE_IMAGE_BASE,
+					    data, len,
+					    REGISTER_TIMEOUT32(len));
 
 	/*
 	 * Send firmware request to device to load firmware,
@@ -1303,7 +1281,8 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
 	rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
 	rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
-	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
+	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
+			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
 	rt2x00_desc_write(txd, 1, word);
 
 	rt2x00_desc_read(txd, 2, &word);
@@ -1352,6 +1331,7 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	unsigned int beacon_base;
 	u32 reg;
+	u32 word, len;
 
 	/*
 	 * Add the descriptor in front of the skb.
@@ -1361,6 +1341,17 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
 	skbdesc->desc = entry->skb->data;
 
 	/*
+	 * Adjust the beacon databyte count. The current number is
+	 * calculated before this function gets called, but falsely
+	 * assumes that the descriptor was already present in the SKB.
+	 */
+	rt2x00_desc_read(skbdesc->desc, 0, &word);
+	len  = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
+	len += skbdesc->desc_len;
+	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
+	rt2x00_desc_write(skbdesc->desc, 0, word);
+
+	/*
 	 * Disable beaconing while we are reloading the beacon data,
 	 * otherwise we might be sending out invalid data.
 	 */
@@ -1374,10 +1365,10 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
 	 * Write entire beacon with descriptor to register.
 	 */
 	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
-	rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
-				 USB_VENDOR_REQUEST_OUT, beacon_base, 0,
-				 entry->skb->data, entry->skb->len,
-				 REGISTER_TIMEOUT32(entry->skb->len));
+	rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+					    USB_VENDOR_REQUEST_OUT, beacon_base,
+					    entry->skb->data, entry->skb->len,
+					    REGISTER_TIMEOUT32(entry->skb->len));
 
 	/*
 	 * Clean up the beacon skb.
@@ -1871,7 +1862,6 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	 * Initialize all hw fields.
 	 */
 	rt2x00dev->hw->flags =
-	    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
 	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 	    IEEE80211_HW_SIGNAL_DBM;
 	rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h
index 3afb49f..1b0d750 100644
--- a/drivers/net/wireless/rtl8187.h
+++ b/drivers/net/wireless/rtl8187.h
@@ -47,11 +47,13 @@ struct rtl8187_rx_hdr {
 struct rtl8187b_rx_hdr {
 	__le32 flags;
 	__le64 mac_time;
-	u8 noise;
-	u8 signal;
+	u8 sq;
+	u8 rssi;
 	u8 agc;
-	u8 reserved;
-	__le32 unused;
+	u8 flags2;
+	__le16 snr_long2end;
+	s8 pwdb_g12;
+	u8 fot;
 } __attribute__((packed));
 
 /* {rtl8187,rtl8187b}_tx_info is in skb */
@@ -100,6 +102,7 @@ struct rtl8187_priv {
 	struct usb_device *udev;
 	u32 rx_conf;
 	u16 txpwr_base;
+	u16 seqno;
 	u8 asic_rev;
 	u8 is_rtl8187b;
 	enum {
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index d3067b1..177988e 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -169,6 +169,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	struct rtl8187_priv *priv = dev->priv;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
 	unsigned int ep;
 	void *buf;
 	struct urb *urb;
@@ -234,6 +235,20 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 			ep = epmap[skb_get_queue_mapping(skb)];
 	}
 
+	/* FIXME: The sequence that follows is needed for this driver to
+	 * work with mac80211 since "mac80211: fix TX sequence numbers".
+	 * As with the temporary code in rt2x00, changes will be needed
+	 * to get proper sequence numbers on beacons. In addition, this
+	 * patch places the sequence number in the hardware state, which
+	 * limits us to a single virtual state.
+	 */
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+			priv->seqno += 0x10;
+		ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		ieee80211hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
+	}
+
 	info->driver_data[0] = dev;
 	info->driver_data[1] = urb;
 
@@ -257,6 +272,7 @@ static void rtl8187_rx_cb(struct urb *urb)
 	struct ieee80211_rx_status rx_status = { 0 };
 	int rate, signal;
 	u32 flags;
+	u32 quality;
 
 	spin_lock(&priv->rx_queue.lock);
 	if (skb->next)
@@ -280,44 +296,57 @@ static void rtl8187_rx_cb(struct urb *urb)
 		flags = le32_to_cpu(hdr->flags);
 		signal = hdr->signal & 0x7f;
 		rx_status.antenna = (hdr->signal >> 7) & 1;
-		rx_status.signal = signal;
 		rx_status.noise = hdr->noise;
 		rx_status.mactime = le64_to_cpu(hdr->mac_time);
-		priv->signal = signal;
 		priv->quality = signal;
+		rx_status.qual = priv->quality;
 		priv->noise = hdr->noise;
+		rate = (flags >> 20) & 0xF;
+		if (rate > 3) { /* OFDM rate */
+			if (signal > 90)
+				signal = 90;
+			else if (signal < 25)
+				signal = 25;
+			signal = 90 - signal;
+		} else {	/* CCK rate */
+			if (signal > 95)
+				signal = 95;
+			else if (signal < 30)
+				signal = 30;
+			signal = 95 - signal;
+		}
+		rx_status.signal = signal;
+		priv->signal = signal;
 	} else {
 		struct rtl8187b_rx_hdr *hdr =
 			(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
+		/* The Realtek datasheet for the RTL8187B shows that the RX
+		 * header contains the following quantities: signal quality,
+		 * RSSI, AGC, the received power in dB, and the measured SNR.
+		 * In testing, none of these quantities show qualitative
+		 * agreement with AP signal strength, except for the AGC,
+		 * which is inversely proportional to the strength of the
+		 * signal. In the following, the quality and signal strength
+		 * are derived from the AGC. The arbitrary scaling constants
+		 * are chosen to make the results close to the values obtained
+		 * for a BCM4312 using b43 as the driver. The noise is ignored
+		 * for now.
+		 */
 		flags = le32_to_cpu(hdr->flags);
-		signal = hdr->agc >> 1;
-		rx_status.antenna = (hdr->signal >> 7) & 1;
-		rx_status.signal = 64 - min(hdr->noise, (u8)64);
-		rx_status.noise = hdr->noise;
+		quality = 170 - hdr->agc;
+		if (quality > 100)
+			quality = 100;
+		signal = 14 - hdr->agc / 2;
+		rx_status.qual = quality;
+		priv->quality = quality;
+		rx_status.signal = signal;
+		priv->signal = signal;
+		rx_status.antenna = (hdr->rssi >> 7) & 1;
 		rx_status.mactime = le64_to_cpu(hdr->mac_time);
-		priv->signal = hdr->signal;
-		priv->quality = hdr->agc >> 1;
-		priv->noise = hdr->noise;
+		rate = (flags >> 20) & 0xF;
 	}
 
 	skb_trim(skb, flags & 0x0FFF);
-	rate = (flags >> 20) & 0xF;
-	if (rate > 3) {	/* OFDM rate */
-		if (signal > 90)
-			signal = 90;
-		else if (signal < 25)
-			signal = 25;
-		signal = 90 - signal;
-	} else {	/* CCK rate */
-		if (signal > 95)
-			signal = 95;
-		else if (signal < 30)
-			signal = 30;
-		signal = 95 - signal;
-	}
-
-	rx_status.qual = priv->quality;
-	rx_status.signal = signal;
 	rx_status.rate_idx = rate;
 	rx_status.freq = dev->conf.channel->center_freq;
 	rx_status.band = dev->conf.channel->band;
@@ -1015,9 +1044,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 
 	priv->mode = IEEE80211_IF_TYPE_MNTR;
 	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-		     IEEE80211_HW_RX_INCLUDES_FCS |
-		     IEEE80211_HW_SIGNAL_UNSPEC;
-	dev->max_signal = 65;
+		     IEEE80211_HW_RX_INCLUDES_FCS;
 
 	eeprom.data = dev;
 	eeprom.register_read = rtl8187_eeprom_register_read;
@@ -1132,10 +1159,16 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 		(*channel++).hw_value = txpwr >> 8;
 	}
 
-	if (priv->is_rtl8187b)
+	if (priv->is_rtl8187b) {
 		printk(KERN_WARNING "rtl8187: 8187B chip detected. Support "
 			"is EXPERIMENTAL, and could damage your\n"
 			"         hardware, use at your own risk\n");
+		dev->flags |= IEEE80211_HW_SIGNAL_DBM;
+	} else {
+		dev->flags |= IEEE80211_HW_SIGNAL_UNSPEC;
+		dev->max_signal = 65;
+	}
+
 	if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
 		printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
 		       " info!\n");
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index fcc532b..4d7b98b 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -935,7 +935,6 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
 	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band;
 
 	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
-		    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
 		    IEEE80211_HW_SIGNAL_DB;
 
 	hw->max_signal = 100;
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 4d17d38..9ce5585 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -49,6 +49,13 @@ config BATTERY_OLPC
 	help
 	  Say Y to enable support for the battery on the OLPC laptop.
 
+config BATTERY_TOSA
+	tristate "Sharp SL-6000 (tosa) battery"
+	depends on MACH_TOSA && MFD_TC6393XB
+	help
+	  Say Y to enable support for the battery on the Sharp Zaurus
+	  SL-6000 (tosa) models.
+
 config BATTERY_PALMTX
 	tristate "Palm T|X battery"
 	depends on MACH_PALMTX
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 6f43a54..4706bf8 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_APM_POWER)		+= apm_power.o
 obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
 obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
 obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
+obj-$(CONFIG_BATTERY_TOSA)	+= tosa_battery.o
 obj-$(CONFIG_BATTERY_PALMTX)	+= palmtx_battery.o
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index ab1e828..32570af 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -19,7 +19,7 @@
 
 #define EC_BAT_VOLTAGE	0x10	/* uint16_t,	*9.76/32,    mV   */
 #define EC_BAT_CURRENT	0x11	/* int16_t,	*15.625/120, mA   */
-#define EC_BAT_ACR	0x12
+#define EC_BAT_ACR	0x12	/* int16_t,	*6250/15,    µAh  */
 #define EC_BAT_TEMP	0x13	/* uint16_t,	*100/256,   °C  */
 #define EC_AMB_TEMP	0x14	/* uint16_t,	*100/256,   °C  */
 #define EC_BAT_STATUS	0x15	/* uint8_t,	bitmask */
@@ -84,6 +84,119 @@ static struct power_supply olpc_ac = {
 	.get_property = olpc_ac_get_prop,
 };
 
+static char bat_serial[17]; /* Ick */
+
+static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
+{
+	if (olpc_platform_info.ecver > 0x44) {
+		if (ec_byte & BAT_STAT_CHARGING)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else if (ec_byte & BAT_STAT_DISCHARGING)
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (ec_byte & BAT_STAT_FULL)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else /* er,... */
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	} else {
+		/* Older EC didn't report charge/discharge bits */
+		if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (ec_byte & BAT_STAT_FULL)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else /* Not _necessarily_ true but EC doesn't tell all yet */
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+	}
+
+	return 0;
+}
+
+static int olpc_bat_get_health(union power_supply_propval *val)
+{
+	uint8_t ec_byte;
+	int ret;
+
+	ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	switch (ec_byte) {
+	case 0:
+		val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+
+	case BAT_ERR_OVERTEMP:
+		val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		break;
+
+	case BAT_ERR_OVERVOLTAGE:
+		val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		break;
+
+	case BAT_ERR_INFOFAIL:
+	case BAT_ERR_OUT_OF_CONTROL:
+	case BAT_ERR_ID_FAIL:
+	case BAT_ERR_ACR_FAIL:
+		val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		break;
+
+	default:
+		/* Eep. We don't know this failure code */
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int olpc_bat_get_mfr(union power_supply_propval *val)
+{
+	uint8_t ec_byte;
+	int ret;
+
+	ec_byte = BAT_ADDR_MFR_TYPE;
+	ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	switch (ec_byte >> 4) {
+	case 1:
+		val->strval = "Gold Peak";
+		break;
+	case 2:
+		val->strval = "BYD";
+		break;
+	default:
+		val->strval = "Unknown";
+		break;
+	}
+
+	return ret;
+}
+
+static int olpc_bat_get_tech(union power_supply_propval *val)
+{
+	uint8_t ec_byte;
+	int ret;
+
+	ec_byte = BAT_ADDR_MFR_TYPE;
+	ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	switch (ec_byte & 0xf) {
+	case 1:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
+		break;
+	case 2:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
+		break;
+	default:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+		break;
+	}
+
+	return ret;
+}
+
 /*********************************************************************
  *		Battery properties
  *********************************************************************/
@@ -94,6 +207,7 @@ static int olpc_bat_get_property(struct power_supply *psy,
 	int ret = 0;
 	int16_t ec_word;
 	uint8_t ec_byte;
+	uint64_t ser_buf;
 
 	ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1);
 	if (ret)
@@ -110,25 +224,10 @@ static int olpc_bat_get_property(struct power_supply *psy,
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
-		if (olpc_platform_info.ecver > 0x44) {
-			if (ec_byte & BAT_STAT_CHARGING)
-				val->intval = POWER_SUPPLY_STATUS_CHARGING;
-			else if (ec_byte & BAT_STAT_DISCHARGING)
-				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
-			else if (ec_byte & BAT_STAT_FULL)
-				val->intval = POWER_SUPPLY_STATUS_FULL;
-			else /* er,... */
-				val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
-		} else {
-			/* Older EC didn't report charge/discharge bits */
-			if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
-				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
-			else if (ec_byte & BAT_STAT_FULL)
-				val->intval = POWER_SUPPLY_STATUS_FULL;
-			else /* Not _necessarily_ true but EC doesn't tell all yet */
-				val->intval = POWER_SUPPLY_STATUS_CHARGING;
-			break;
-		}
+		ret = olpc_bat_get_status(val, ec_byte);
+		if (ret)
+			return ret;
+		break;
 	case POWER_SUPPLY_PROP_PRESENT:
 		val->intval = !!(ec_byte & BAT_STAT_PRESENT);
 		break;
@@ -137,72 +236,21 @@ static int olpc_bat_get_property(struct power_supply *psy,
 		if (ec_byte & BAT_STAT_DESTROY)
 			val->intval = POWER_SUPPLY_HEALTH_DEAD;
 		else {
-			ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+			ret = olpc_bat_get_health(val);
 			if (ret)
 				return ret;
-
-			switch (ec_byte) {
-			case 0:
-				val->intval = POWER_SUPPLY_HEALTH_GOOD;
-				break;
-
-			case BAT_ERR_OVERTEMP:
-				val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
-				break;
-
-			case BAT_ERR_OVERVOLTAGE:
-				val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
-				break;
-
-			case BAT_ERR_INFOFAIL:
-			case BAT_ERR_OUT_OF_CONTROL:
-			case BAT_ERR_ID_FAIL:
-			case BAT_ERR_ACR_FAIL:
-				val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
-				break;
-
-			default:
-				/* Eep. We don't know this failure code */
-				return -EIO;
-			}
 		}
 		break;
 
 	case POWER_SUPPLY_PROP_MANUFACTURER:
-		ec_byte = BAT_ADDR_MFR_TYPE;
-		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+		ret = olpc_bat_get_mfr(val);
 		if (ret)
 			return ret;
-
-		switch (ec_byte >> 4) {
-		case 1:
-			val->strval = "Gold Peak";
-			break;
-		case 2:
-			val->strval = "BYD";
-			break;
-		default:
-			val->strval = "Unknown";
-			break;
-		}
 		break;
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
-		ec_byte = BAT_ADDR_MFR_TYPE;
-		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+		ret = olpc_bat_get_tech(val);
 		if (ret)
 			return ret;
-
-		switch (ec_byte & 0xf) {
-		case 1:
-			val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
-			break;
-		case 2:
-			val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
-			break;
-		default:
-			val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
-			break;
-		}
 		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
 		ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2);
@@ -241,6 +289,22 @@ static int olpc_bat_get_property(struct power_supply *psy,
 		ec_word = be16_to_cpu(ec_word);
 		val->intval = ec_word * 100 / 256;
 		break;
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+		ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2);
+		if (ret)
+			return ret;
+
+		ec_word = be16_to_cpu(ec_word);
+		val->intval = ec_word * 6250 / 15;
+		break;
+	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+		ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8);
+		if (ret)
+			return ret;
+
+		sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf));
+		val->strval = bat_serial;
+		break;
 	default:
 		ret = -EINVAL;
 		break;
@@ -260,6 +324,50 @@ static enum power_supply_property olpc_bat_props[] = {
 	POWER_SUPPLY_PROP_TEMP,
 	POWER_SUPPLY_PROP_TEMP_AMBIENT,
 	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+};
+
+/* EEPROM reading goes completely around the power_supply API, sadly */
+
+#define EEPROM_START	0x20
+#define EEPROM_END	0x80
+#define EEPROM_SIZE	(EEPROM_END - EEPROM_START)
+
+static ssize_t olpc_bat_eeprom_read(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf, loff_t off, size_t count)
+{
+	uint8_t ec_byte;
+	int ret, end;
+
+	if (off >= EEPROM_SIZE)
+		return 0;
+	if (off + count > EEPROM_SIZE)
+		count = EEPROM_SIZE - off;
+
+	end = EEPROM_START + off + count;
+	for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
+		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
+				&buf[ec_byte - EEPROM_START], 1);
+		if (ret) {
+			printk(KERN_ERR "olpc-battery:  EC command "
+					"EC_BAT_EEPROM @ 0x%x failed -"
+					" %d!\n", ec_byte, ret);
+			return -EIO;
+		}
+	}
+
+	return count;
+}
+
+static struct bin_attribute olpc_bat_eeprom = {
+	.attr = {
+		.name = "eeprom",
+		.mode = S_IRUGO,
+		.owner = THIS_MODULE,
+	},
+	.size = 0,
+	.read = olpc_bat_eeprom_read,
 };
 
 /*********************************************************************
@@ -290,8 +398,14 @@ static int __init olpc_bat_init(void)
 
 	if (!olpc_platform_info.ecver)
 		return -ENXIO;
-	if (olpc_platform_info.ecver < 0x43) {
-		printk(KERN_NOTICE "OLPC EC version 0x%02x too old for battery driver.\n", olpc_platform_info.ecver);
+
+	/*
+	 * We've seen a number of EC protocol changes; this driver requires
+	 * the latest EC protocol, supported by 0x44 and above.
+	 */
+	if (olpc_platform_info.ecver < 0x44) {
+		printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
+			"battery driver.\n", olpc_platform_info.ecver);
 		return -ENXIO;
 	}
 
@@ -315,8 +429,14 @@ static int __init olpc_bat_init(void)
 	if (ret)
 		goto battery_failed;
 
+	ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
+	if (ret)
+		goto eeprom_failed;
+
 	goto success;
 
+eeprom_failed:
+	power_supply_unregister(&olpc_bat);
 battery_failed:
 	power_supply_unregister(&olpc_ac);
 ac_failed:
@@ -327,6 +447,7 @@ success:
 
 static void __exit olpc_bat_exit(void)
 {
+	device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
 	power_supply_unregister(&olpc_bat);
 	power_supply_unregister(&olpc_ac);
 	platform_device_unregister(bat_pdev);
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 49215da..fe2aeb1 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -99,6 +99,7 @@ static struct device_attribute power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(charge_empty),
 	POWER_SUPPLY_ATTR(charge_now),
 	POWER_SUPPLY_ATTR(charge_avg),
+	POWER_SUPPLY_ATTR(charge_counter),
 	POWER_SUPPLY_ATTR(energy_full_design),
 	POWER_SUPPLY_ATTR(energy_empty_design),
 	POWER_SUPPLY_ATTR(energy_full),
diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c
new file mode 100644
index 0000000..bf664fb
--- /dev/null
+++ b/drivers/power/tosa_battery.c
@@ -0,0 +1,486 @@
+/*
+ * Battery and Power Management code for the Sharp SL-6000x
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/tosa.h>
+
+static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
+static struct work_struct bat_work;
+
+struct tosa_bat {
+	int status;
+	struct power_supply psy;
+	int full_chrg;
+
+	struct mutex work_lock; /* protects data */
+
+	bool (*is_present)(struct tosa_bat *bat);
+	int gpio_full;
+	int gpio_charge_off;
+
+	int technology;
+
+	int gpio_bat;
+	int adc_bat;
+	int adc_bat_divider;
+	int bat_max;
+	int bat_min;
+
+	int gpio_temp;
+	int adc_temp;
+	int adc_temp_divider;
+};
+
+static struct tosa_bat tosa_bat_main;
+static struct tosa_bat tosa_bat_jacket;
+
+static unsigned long tosa_read_bat(struct tosa_bat *bat)
+{
+	unsigned long value = 0;
+
+	if (bat->gpio_bat < 0 || bat->adc_bat < 0)
+		return 0;
+
+	mutex_lock(&bat_lock);
+	gpio_set_value(bat->gpio_bat, 1);
+	msleep(5);
+	value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
+			bat->adc_bat);
+	gpio_set_value(bat->gpio_bat, 0);
+	mutex_unlock(&bat_lock);
+
+	value = value * 1000000 / bat->adc_bat_divider;
+
+	return value;
+}
+
+static unsigned long tosa_read_temp(struct tosa_bat *bat)
+{
+	unsigned long value = 0;
+
+	if (bat->gpio_temp < 0 || bat->adc_temp < 0)
+		return 0;
+
+	mutex_lock(&bat_lock);
+	gpio_set_value(bat->gpio_temp, 1);
+	msleep(5);
+	value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
+			bat->adc_temp);
+	gpio_set_value(bat->gpio_temp, 0);
+	mutex_unlock(&bat_lock);
+
+	value = value * 10000 / bat->adc_temp_divider;
+
+	return value;
+}
+
+static int tosa_bat_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	int ret = 0;
+	struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy);
+
+	if (bat->is_present && !bat->is_present(bat)
+			&& psp != POWER_SUPPLY_PROP_PRESENT) {
+		return -ENODEV;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = bat->status;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = bat->technology;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = tosa_read_bat(bat);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		if (bat->full_chrg == -1)
+			val->intval = bat->bat_max;
+		else
+			val->intval = bat->full_chrg;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = bat->bat_max;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = bat->bat_min;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = tosa_read_temp(bat);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = bat->is_present ? bat->is_present(bat) : 1;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static bool tosa_jacket_bat_is_present(struct tosa_bat *bat)
+{
+	return gpio_get_value(TOSA_GPIO_JACKET_DETECT) == 0;
+}
+
+static void tosa_bat_external_power_changed(struct power_supply *psy)
+{
+	schedule_work(&bat_work);
+}
+
+static irqreturn_t tosa_bat_gpio_isr(int irq, void *data)
+{
+	pr_info("tosa_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
+	schedule_work(&bat_work);
+	return IRQ_HANDLED;
+}
+
+static void tosa_bat_update(struct tosa_bat *bat)
+{
+	int old;
+	struct power_supply *psy = &bat->psy;
+
+	mutex_lock(&bat->work_lock);
+
+	old = bat->status;
+
+	if (bat->is_present && !bat->is_present(bat)) {
+		printk(KERN_NOTICE "%s not present\n", psy->name);
+		bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+		bat->full_chrg = -1;
+	} else if (power_supply_am_i_supplied(psy)) {
+		if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
+			gpio_set_value(bat->gpio_charge_off, 0);
+			mdelay(15);
+		}
+
+		if (gpio_get_value(bat->gpio_full)) {
+			if (old == POWER_SUPPLY_STATUS_CHARGING ||
+					bat->full_chrg == -1)
+				bat->full_chrg = tosa_read_bat(bat);
+
+			gpio_set_value(bat->gpio_charge_off, 1);
+			bat->status = POWER_SUPPLY_STATUS_FULL;
+		} else {
+			gpio_set_value(bat->gpio_charge_off, 0);
+			bat->status = POWER_SUPPLY_STATUS_CHARGING;
+		}
+	} else {
+		gpio_set_value(bat->gpio_charge_off, 1);
+		bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+	}
+
+	if (old != bat->status)
+		power_supply_changed(psy);
+
+	mutex_unlock(&bat->work_lock);
+}
+
+static void tosa_bat_work(struct work_struct *work)
+{
+	tosa_bat_update(&tosa_bat_main);
+	tosa_bat_update(&tosa_bat_jacket);
+}
+
+
+static enum power_supply_property tosa_bat_main_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_PRESENT,
+};
+
+static enum power_supply_property tosa_bat_bu_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_PRESENT,
+};
+
+static struct tosa_bat tosa_bat_main = {
+	.status = POWER_SUPPLY_STATUS_DISCHARGING,
+	.full_chrg = -1,
+	.psy = {
+		.name		= "main-battery",
+		.type		= POWER_SUPPLY_TYPE_BATTERY,
+		.properties	= tosa_bat_main_props,
+		.num_properties	= ARRAY_SIZE(tosa_bat_main_props),
+		.get_property	= tosa_bat_get_property,
+		.external_power_changed = tosa_bat_external_power_changed,
+		.use_for_apm	= 1,
+	},
+
+	.gpio_full = TOSA_GPIO_BAT0_CRG,
+	.gpio_charge_off = TOSA_GPIO_CHARGE_OFF,
+
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+	.gpio_bat = TOSA_GPIO_BAT0_V_ON,
+	.adc_bat = WM97XX_AUX_ID3,
+	.adc_bat_divider = 414,
+	.bat_max = 4310000,
+	.bat_min = 1551 * 1000000 / 414,
+
+	.gpio_temp = TOSA_GPIO_BAT1_TH_ON,
+	.adc_temp = WM97XX_AUX_ID2,
+	.adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_jacket = {
+	.status = POWER_SUPPLY_STATUS_DISCHARGING,
+	.full_chrg = -1,
+	.psy = {
+		.name		= "jacket-battery",
+		.type		= POWER_SUPPLY_TYPE_BATTERY,
+		.properties	= tosa_bat_main_props,
+		.num_properties	= ARRAY_SIZE(tosa_bat_main_props),
+		.get_property	= tosa_bat_get_property,
+		.external_power_changed = tosa_bat_external_power_changed,
+	},
+
+	.is_present = tosa_jacket_bat_is_present,
+	.gpio_full = TOSA_GPIO_BAT1_CRG,
+	.gpio_charge_off = TOSA_GPIO_CHARGE_OFF_JC,
+
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+	.gpio_bat = TOSA_GPIO_BAT1_V_ON,
+	.adc_bat = WM97XX_AUX_ID3,
+	.adc_bat_divider = 414,
+	.bat_max = 4310000,
+	.bat_min = 1551 * 1000000 / 414,
+
+	.gpio_temp = TOSA_GPIO_BAT0_TH_ON,
+	.adc_temp = WM97XX_AUX_ID2,
+	.adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_bu = {
+	.status = POWER_SUPPLY_STATUS_UNKNOWN,
+	.full_chrg = -1,
+
+	.psy = {
+		.name		= "backup-battery",
+		.type		= POWER_SUPPLY_TYPE_BATTERY,
+		.properties	= tosa_bat_bu_props,
+		.num_properties	= ARRAY_SIZE(tosa_bat_bu_props),
+		.get_property	= tosa_bat_get_property,
+		.external_power_changed = tosa_bat_external_power_changed,
+	},
+
+	.gpio_full = -1,
+	.gpio_charge_off = -1,
+
+	.technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
+
+	.gpio_bat = TOSA_GPIO_BU_CHRG_ON,
+	.adc_bat = WM97XX_AUX_ID4,
+	.adc_bat_divider = 1266,
+
+	.gpio_temp = -1,
+	.adc_temp = -1,
+	.adc_temp_divider = -1,
+};
+
+static struct {
+	int gpio;
+	char *name;
+	bool output;
+	int value;
+} gpios[] = {
+	{ TOSA_GPIO_CHARGE_OFF,		"main charge off",	1, 1 },
+	{ TOSA_GPIO_CHARGE_OFF_JC,	"jacket charge off",	1, 1 },
+	{ TOSA_GPIO_BAT_SW_ON,		"battery switch",	1, 0 },
+	{ TOSA_GPIO_BAT0_V_ON,		"main battery",		1, 0 },
+	{ TOSA_GPIO_BAT1_V_ON,		"jacket battery",	1, 0 },
+	{ TOSA_GPIO_BAT1_TH_ON,		"main battery temp",	1, 0 },
+	{ TOSA_GPIO_BAT0_TH_ON,		"jacket battery temp",	1, 0 },
+	{ TOSA_GPIO_BU_CHRG_ON,		"backup battery",	1, 0 },
+	{ TOSA_GPIO_BAT0_CRG,		"main battery full",	0, 0 },
+	{ TOSA_GPIO_BAT1_CRG,		"jacket battery full",	0, 0 },
+	{ TOSA_GPIO_BAT0_LOW,		"main battery low",	0, 0 },
+	{ TOSA_GPIO_BAT1_LOW,		"jacket battery low",	0, 0 },
+	{ TOSA_GPIO_JACKET_DETECT,	"jacket detect",	0, 0 },
+};
+
+#ifdef CONFIG_PM
+static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state)
+{
+	/* flush all pending status updates */
+	flush_scheduled_work();
+	return 0;
+}
+
+static int tosa_bat_resume(struct platform_device *dev)
+{
+	/* things may have changed while we were away */
+	schedule_work(&bat_work);
+	return 0;
+}
+#else
+#define tosa_bat_suspend NULL
+#define tosa_bat_resume NULL
+#endif
+
+static int __devinit tosa_bat_probe(struct platform_device *dev)
+{
+	int ret;
+	int i;
+
+	if (!machine_is_tosa())
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+		ret = gpio_request(gpios[i].gpio, gpios[i].name);
+		if (ret) {
+			i--;
+			goto err_gpio;
+		}
+
+		if (gpios[i].output)
+			ret = gpio_direction_output(gpios[i].gpio,
+					gpios[i].value);
+		else
+			ret = gpio_direction_input(gpios[i].gpio);
+
+		if (ret)
+			goto err_gpio;
+	}
+
+	mutex_init(&tosa_bat_main.work_lock);
+	mutex_init(&tosa_bat_jacket.work_lock);
+
+	INIT_WORK(&bat_work, tosa_bat_work);
+
+	ret = power_supply_register(&dev->dev, &tosa_bat_main.psy);
+	if (ret)
+		goto err_psy_reg_main;
+	ret = power_supply_register(&dev->dev, &tosa_bat_jacket.psy);
+	if (ret)
+		goto err_psy_reg_jacket;
+	ret = power_supply_register(&dev->dev, &tosa_bat_bu.psy);
+	if (ret)
+		goto err_psy_reg_bu;
+
+	ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG),
+				tosa_bat_gpio_isr,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"main full", &tosa_bat_main);
+	if (ret)
+		goto err_req_main;
+
+	ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG),
+				tosa_bat_gpio_isr,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"jacket full", &tosa_bat_jacket);
+	if (ret)
+		goto err_req_jacket;
+
+	ret = request_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT),
+				tosa_bat_gpio_isr,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"jacket detect", &tosa_bat_jacket);
+	if (!ret) {
+		schedule_work(&bat_work);
+		return 0;
+	}
+
+	free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+err_req_jacket:
+	free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+err_req_main:
+	power_supply_unregister(&tosa_bat_bu.psy);
+err_psy_reg_bu:
+	power_supply_unregister(&tosa_bat_jacket.psy);
+err_psy_reg_jacket:
+	power_supply_unregister(&tosa_bat_main.psy);
+err_psy_reg_main:
+
+	/* see comment in tosa_bat_remove */
+	flush_scheduled_work();
+
+	i--;
+err_gpio:
+	for (; i >= 0; i--)
+		gpio_free(gpios[i].gpio);
+
+	return ret;
+}
+
+static int __devexit tosa_bat_remove(struct platform_device *dev)
+{
+	int i;
+
+	free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket);
+	free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+	free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+
+	power_supply_unregister(&tosa_bat_bu.psy);
+	power_supply_unregister(&tosa_bat_jacket.psy);
+	power_supply_unregister(&tosa_bat_main.psy);
+
+	/*
+	 * now flush all pending work.
+	 * we won't get any more schedules, since all
+	 * sources (isr and external_power_changed)
+	 * are unregistered now.
+	 */
+	flush_scheduled_work();
+
+	for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--)
+		gpio_free(gpios[i].gpio);
+
+	return 0;
+}
+
+static struct platform_driver tosa_bat_driver = {
+	.driver.name	= "wm97xx-battery",
+	.driver.owner	= THIS_MODULE,
+	.probe		= tosa_bat_probe,
+	.remove		= __devexit_p(tosa_bat_remove),
+	.suspend	= tosa_bat_suspend,
+	.resume		= tosa_bat_resume,
+};
+
+static int __init tosa_bat_init(void)
+{
+	return platform_driver_register(&tosa_bat_driver);
+}
+
+static void __exit tosa_bat_exit(void)
+{
+	platform_driver_unregister(&tosa_bat_driver);
+}
+
+module_init(tosa_bat_init);
+module_exit(tosa_bat_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_DESCRIPTION("Tosa battery driver");
+MODULE_ALIAS("platform:wm97xx-battery");
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index d397fa5..7af60b9 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -20,7 +20,7 @@ int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm)
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	if (!rtc->ops)
 		err = -ENODEV;
@@ -46,7 +46,7 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	if (!rtc->ops)
 		err = -ENODEV;
@@ -66,7 +66,7 @@ int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs)
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	if (!rtc->ops)
 		err = -ENODEV;
@@ -106,7 +106,7 @@ static int rtc_read_alarm_internal(struct rtc_device *rtc, struct rtc_wkalrm *al
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	if (rtc->ops == NULL)
 		err = -ENODEV;
@@ -293,7 +293,7 @@ int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	if (!rtc->ops)
 		err = -ENODEV;
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 0a870b7..856cc1a 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -221,7 +221,7 @@ static long rtc_dev_ioctl(struct file *file,
 
 	err = mutex_lock_interruptible(&rtc->ops_lock);
 	if (err)
-		return -EBUSY;
+		return err;
 
 	/* check that the calling task has appropriate permissions
 	 * for certain ioctls. doing this check here is useful
@@ -432,6 +432,8 @@ static int rtc_dev_release(struct inode *inode, struct file *file)
 #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
 	clear_uie(rtc);
 #endif
+	rtc_irq_set_state(rtc, NULL, 0);
+
 	if (rtc->ops->release)
 		rtc->ops->release(rtc->dev.parent);
 
diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c
index 2d8df0b..20676cd 100644
--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -91,7 +91,8 @@ static struct alias_pav_group *_find_group(struct alias_lcu *lcu,
 	else
 		search_unit_addr = uid->base_unit_addr;
 	list_for_each_entry(pos, &lcu->grouplist, group) {
-		if (pos->uid.base_unit_addr == search_unit_addr)
+		if (pos->uid.base_unit_addr == search_unit_addr &&
+		    !strncmp(pos->uid.vduit, uid->vduit, sizeof(uid->vduit)))
 			return pos;
 	};
 	return NULL;
@@ -332,6 +333,7 @@ static int _add_device_to_lcu(struct alias_lcu *lcu,
 			group->uid.base_unit_addr = uid->real_unit_addr;
 		else
 			group->uid.base_unit_addr = uid->base_unit_addr;
+		memcpy(group->uid.vduit, uid->vduit, sizeof(uid->vduit));
 		INIT_LIST_HEAD(&group->group);
 		INIT_LIST_HEAD(&group->baselist);
 		INIT_LIST_HEAD(&group->aliaslist);
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index d774e79..cd3335c 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -913,7 +913,8 @@ dasd_vendor_show(struct device *dev, struct device_attribute *attr, char *buf)
 static DEVICE_ATTR(vendor, 0444, dasd_vendor_show, NULL);
 
 #define UID_STRLEN ( /* vendor */ 3 + 1 + /* serial    */ 14 + 1 +\
-		     /* SSID   */ 4 + 1 + /* unit addr */ 2 + 1)
+		     /* SSID   */ 4 + 1 + /* unit addr */ 2 + 1 +\
+		     /* vduit */ 32 + 1)
 
 static ssize_t
 dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf)
@@ -945,8 +946,17 @@ dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf)
 		sprintf(ua_string, "%02x", uid->real_unit_addr);
 		break;
 	}
-	snprintf(uid_string, sizeof(uid_string), "%s.%s.%04x.%s",
-		 uid->vendor, uid->serial, uid->ssid, ua_string);
+	if (strlen(uid->vduit) > 0)
+		snprintf(uid_string, sizeof(uid_string),
+			 "%s.%s.%04x.%s.%s",
+			 uid->vendor, uid->serial,
+			 uid->ssid, ua_string,
+			 uid->vduit);
+	else
+		snprintf(uid_string, sizeof(uid_string),
+			 "%s.%s.%04x.%s",
+			 uid->vendor, uid->serial,
+			 uid->ssid, ua_string);
 	spin_unlock(&dasd_devmap_lock);
 	return snprintf(buf, PAGE_SIZE, "%s\n", uid_string);
 }
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 3590fdb..773b3fe 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -313,8 +313,8 @@ static int prefix(struct ccw1 *ccw, struct PFX_eckd_data *pfxdata, int trk,
 	memset(pfxdata, 0, sizeof(*pfxdata));
 	/* prefix data */
 	pfxdata->format = 0;
-	pfxdata->base_address = basepriv->conf_data.ned1.unit_addr;
-	pfxdata->base_lss = basepriv->conf_data.ned1.ID;
+	pfxdata->base_address = basepriv->ned->unit_addr;
+	pfxdata->base_lss = basepriv->ned->ID;
 	pfxdata->validity.define_extend = 1;
 
 	/* private uid is kept up to date, conf_data may be outdated */
@@ -536,36 +536,40 @@ dasd_eckd_cdl_reclen(int recid)
 /*
  * Generate device unique id that specifies the physical device.
  */
-static int
-dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid)
+static int dasd_eckd_generate_uid(struct dasd_device *device,
+				  struct dasd_uid *uid)
 {
 	struct dasd_eckd_private *private;
-	struct dasd_eckd_confdata *confdata;
+	int count;
 
 	private = (struct dasd_eckd_private *) device->private;
 	if (!private)
 		return -ENODEV;
-	confdata = &private->conf_data;
-	if (!confdata)
+	if (!private->ned || !private->gneq)
 		return -ENODEV;
 
 	memset(uid, 0, sizeof(struct dasd_uid));
-	memcpy(uid->vendor, confdata->ned1.HDA_manufacturer,
+	memcpy(uid->vendor, private->ned->HDA_manufacturer,
 	       sizeof(uid->vendor) - 1);
 	EBCASC(uid->vendor, sizeof(uid->vendor) - 1);
-	memcpy(uid->serial, confdata->ned1.HDA_location,
+	memcpy(uid->serial, private->ned->HDA_location,
 	       sizeof(uid->serial) - 1);
 	EBCASC(uid->serial, sizeof(uid->serial) - 1);
-	uid->ssid = confdata->neq.subsystemID;
-	uid->real_unit_addr = confdata->ned1.unit_addr;
-	if (confdata->ned2.sneq.flags == 0x40 &&
-	    confdata->ned2.sneq.format == 0x0001) {
-		uid->type = confdata->ned2.sneq.sua_flags;
+	uid->ssid = private->gneq->subsystemID;
+	uid->real_unit_addr = private->ned->unit_addr;;
+	if (private->sneq) {
+		uid->type = private->sneq->sua_flags;
 		if (uid->type == UA_BASE_PAV_ALIAS)
-			uid->base_unit_addr = confdata->ned2.sneq.base_unit_addr;
+			uid->base_unit_addr = private->sneq->base_unit_addr;
 	} else {
 		uid->type = UA_BASE_DEVICE;
 	}
+	if (private->vdsneq) {
+		for (count = 0; count < 16; count++) {
+			sprintf(uid->vduit+2*count, "%02x",
+				private->vdsneq->uit[count]);
+		}
+	}
 	return 0;
 }
 
@@ -623,6 +627,15 @@ static int dasd_eckd_read_conf_lpm(struct dasd_device *device,
 		ret = -ENOMEM;
 		goto out_error;
 	}
+
+	/*
+	 * buffer has to start with EBCDIC "V1.0" to show
+	 * support for virtual device SNEQ
+	 */
+	rcd_buf[0] = 0xE5;
+	rcd_buf[1] = 0xF1;
+	rcd_buf[2] = 0x4B;
+	rcd_buf[3] = 0xF0;
 	cqr = dasd_eckd_build_rcd_lpm(device, rcd_buf, ciw, lpm);
 	if (IS_ERR(cqr)) {
 		ret =  PTR_ERR(cqr);
@@ -646,8 +659,62 @@ out_error:
 	return ret;
 }
 
-static int
-dasd_eckd_read_conf(struct dasd_device *device)
+static int dasd_eckd_identify_conf_parts(struct dasd_eckd_private *private)
+{
+
+	struct dasd_sneq *sneq;
+	int i, count;
+
+	private->ned = NULL;
+	private->sneq = NULL;
+	private->vdsneq = NULL;
+	private->gneq = NULL;
+	count = private->conf_len / sizeof(struct dasd_sneq);
+	sneq = (struct dasd_sneq *)private->conf_data;
+	for (i = 0; i < count; ++i) {
+		if (sneq->flags.identifier == 1 && sneq->format == 1)
+			private->sneq = sneq;
+		else if (sneq->flags.identifier == 1 && sneq->format == 4)
+			private->vdsneq = (struct vd_sneq *)sneq;
+		else if (sneq->flags.identifier == 2)
+			private->gneq = (struct dasd_gneq *)sneq;
+		else if (sneq->flags.identifier == 3 && sneq->res1 == 1)
+			private->ned = (struct dasd_ned *)sneq;
+		sneq++;
+	}
+	if (!private->ned || !private->gneq) {
+		private->ned = NULL;
+		private->sneq = NULL;
+		private->vdsneq = NULL;
+		private->gneq = NULL;
+		return -EINVAL;
+	}
+	return 0;
+
+};
+
+static unsigned char dasd_eckd_path_access(void *conf_data, int conf_len)
+{
+	struct dasd_gneq *gneq;
+	int i, count, found;
+
+	count = conf_len / sizeof(*gneq);
+	gneq = (struct dasd_gneq *)conf_data;
+	found = 0;
+	for (i = 0; i < count; ++i) {
+		if (gneq->flags.identifier == 2) {
+			found = 1;
+			break;
+		}
+		gneq++;
+	}
+	if (found)
+		return ((char *)gneq)[18] & 0x07;
+	else
+		return 0;
+}
+
+static int dasd_eckd_read_conf(struct dasd_device *device)
 {
 	void *conf_data;
 	int conf_len, conf_data_saved;
@@ -661,7 +728,6 @@ dasd_eckd_read_conf(struct dasd_device *device)
 	path_data->opm = ccw_device_get_path_mask(device->cdev);
 	lpm = 0x80;
 	conf_data_saved = 0;
-
 	/* get configuration data per operational path */
 	for (lpm = 0x80; lpm; lpm>>= 1) {
 		if (lpm & path_data->opm){
@@ -678,22 +744,20 @@ dasd_eckd_read_conf(struct dasd_device *device)
 					"data retrieved");
 				continue;	/* no error */
 			}
-			if (conf_len != sizeof(struct dasd_eckd_confdata)) {
-				MESSAGE(KERN_WARNING,
-					"sizes of configuration data mismatch"
-					"%d (read) vs %ld (expected)",
-					conf_len,
-					sizeof(struct dasd_eckd_confdata));
-				kfree(conf_data);
-				continue;	/* no error */
-			}
 			/* save first valid configuration data */
-			if (!conf_data_saved){
-				memcpy(&private->conf_data, conf_data,
-				       sizeof(struct dasd_eckd_confdata));
+			if (!conf_data_saved) {
+				kfree(private->conf_data);
+				private->conf_data = conf_data;
+				private->conf_len = conf_len;
+				if (dasd_eckd_identify_conf_parts(private)) {
+					private->conf_data = NULL;
+					private->conf_len = 0;
+					kfree(conf_data);
+					continue;
+				}
 				conf_data_saved++;
 			}
-			switch (((char *)conf_data)[242] & 0x07){
+			switch (dasd_eckd_path_access(conf_data, conf_len)) {
 			case 0x02:
 				path_data->npm |= lpm;
 				break;
@@ -701,7 +765,8 @@ dasd_eckd_read_conf(struct dasd_device *device)
 				path_data->ppm |= lpm;
 				break;
 			}
-			kfree(conf_data);
+			if (conf_data != private->conf_data)
+				kfree(conf_data);
 		}
 	}
 	return 0;
@@ -952,6 +1017,7 @@ out_err2:
 	dasd_free_block(device->block);
 	device->block = NULL;
 out_err1:
+	kfree(private->conf_data);
 	kfree(device->private);
 	device->private = NULL;
 	return rc;
@@ -959,7 +1025,17 @@ out_err1:
 
 static void dasd_eckd_uncheck_device(struct dasd_device *device)
 {
+	struct dasd_eckd_private *private;
+
+	private = (struct dasd_eckd_private *) device->private;
 	dasd_alias_disconnect_device_from_lcu(device);
+	private->ned = NULL;
+	private->sneq = NULL;
+	private->vdsneq = NULL;
+	private->gneq = NULL;
+	private->conf_len = 0;
+	kfree(private->conf_data);
+	private->conf_data = NULL;
 }
 
 static struct dasd_ccw_req *
@@ -1746,9 +1822,10 @@ dasd_eckd_fill_info(struct dasd_device * device,
 	info->characteristics_size = sizeof(struct dasd_eckd_characteristics);
 	memcpy(info->characteristics, &private->rdc_data,
 	       sizeof(struct dasd_eckd_characteristics));
-	info->confdata_size = sizeof(struct dasd_eckd_confdata);
-	memcpy(info->configuration_data, &private->conf_data,
-	       sizeof(struct dasd_eckd_confdata));
+	info->confdata_size = min((unsigned long)private->conf_len,
+				  sizeof(info->configuration_data));
+	memcpy(info->configuration_data, private->conf_data,
+	       info->confdata_size);
 	return 0;
 }
 
diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h
index fc2509c..4bf0aa5 100644
--- a/drivers/s390/block/dasd_eckd.h
+++ b/drivers/s390/block/dasd_eckd.h
@@ -231,133 +231,62 @@ struct dasd_eckd_characteristics {
 	__u8 reserved3[10];
 } __attribute__ ((packed));
 
-struct dasd_eckd_confdata {
+/* elements of the configuration data */
+struct dasd_ned {
 	struct {
-		struct {
-			unsigned char identifier:2;
-			unsigned char token_id:1;
-			unsigned char sno_valid:1;
-			unsigned char subst_sno:1;
-			unsigned char recNED:1;
-			unsigned char emuNED:1;
-			unsigned char reserved:1;
-		} __attribute__ ((packed)) flags;
-		__u8 descriptor;
-		__u8 dev_class;
-		__u8 reserved;
-		unsigned char dev_type[6];
-		unsigned char dev_model[3];
-		unsigned char HDA_manufacturer[3];
-		unsigned char HDA_location[2];
-		unsigned char HDA_seqno[12];
-		__u8 ID;
-		__u8 unit_addr;
-	} __attribute__ ((packed)) ned1;
-	union {
-		struct {
-			struct {
-				unsigned char identifier:2;
-				unsigned char token_id:1;
-				unsigned char sno_valid:1;
-				unsigned char subst_sno:1;
-				unsigned char recNED:1;
-				unsigned char emuNED:1;
-				unsigned char reserved:1;
-			} __attribute__ ((packed)) flags;
-			__u8 descriptor;
-			__u8 reserved[2];
-			unsigned char dev_type[6];
-			unsigned char dev_model[3];
-			unsigned char DASD_manufacturer[3];
-			unsigned char DASD_location[2];
-			unsigned char DASD_seqno[12];
-			__u16 ID;
-		} __attribute__ ((packed)) ned;
-		struct {
-			unsigned char flags;            /* byte  0    */
-			unsigned char res1;		/* byte  1    */
-			__u16 format;			/* byte  2-3  */
-			unsigned char res2[4];		/* byte  4-7  */
-			unsigned char sua_flags;	/* byte  8    */
-			__u8 base_unit_addr;            /* byte  9    */
-			unsigned char res3[22];	        /* byte 10-31 */
-		} __attribute__ ((packed)) sneq;
-	} __attribute__ ((packed)) ned2;
+		__u8 identifier:2;
+		__u8 token_id:1;
+		__u8 sno_valid:1;
+		__u8 subst_sno:1;
+		__u8 recNED:1;
+		__u8 emuNED:1;
+		__u8 reserved:1;
+	} __attribute__ ((packed)) flags;
+	__u8 descriptor;
+	__u8 dev_class;
+	__u8 reserved;
+	__u8 dev_type[6];
+	__u8 dev_model[3];
+	__u8 HDA_manufacturer[3];
+	__u8 HDA_location[2];
+	__u8 HDA_seqno[12];
+	__u8 ID;
+	__u8 unit_addr;
+} __attribute__ ((packed));
+
+struct dasd_sneq {
 	struct {
-		struct {
-			unsigned char identifier:2;
-			unsigned char token_id:1;
-			unsigned char sno_valid:1;
-			unsigned char subst_sno:1;
-			unsigned char recNED:1;
-			unsigned char emuNED:1;
-			unsigned char reserved:1;
-		} __attribute__ ((packed)) flags;
-		__u8 descriptor;
-		__u8 reserved[2];
-		unsigned char cont_type[6];
-		unsigned char cont_model[3];
-		unsigned char cont_manufacturer[3];
-		unsigned char cont_location[2];
-		unsigned char cont_seqno[12];
-		__u16 ID;
-	} __attribute__ ((packed)) ned3;
+		__u8 identifier:2;
+		__u8 reserved:6;
+	} __attribute__ ((packed)) flags;
+	__u8 res1;
+	__u16 format;
+	__u8 res2[4];		/* byte  4- 7 */
+	__u8 sua_flags;		/* byte  8    */
+	__u8 base_unit_addr;	/* byte  9    */
+	__u8 res3[22];		/* byte 10-31 */
+} __attribute__ ((packed));
+
+struct vd_sneq {
 	struct {
-		struct {
-			unsigned char identifier:2;
-			unsigned char token_id:1;
-			unsigned char sno_valid:1;
-			unsigned char subst_sno:1;
-			unsigned char recNED:1;
-			unsigned char emuNED:1;
-			unsigned char reserved:1;
-		} __attribute__ ((packed)) flags;
-		__u8 descriptor;
-		__u8 reserved[2];
-		unsigned char cont_type[6];
-		unsigned char empty[3];
-		unsigned char cont_manufacturer[3];
-		unsigned char cont_location[2];
-		unsigned char cont_seqno[12];
-		__u16 ID;
-	} __attribute__ ((packed)) ned4;
-	unsigned char ned5[32];
-	unsigned char ned6[32];
-	unsigned char ned7[32];
+		__u8 identifier:2;
+		__u8 reserved:6;
+	} __attribute__ ((packed)) flags;
+	__u8 res1;
+	__u16 format;
+	__u8 res2[4];	/* byte  4- 7 */
+	__u8 uit[16];	/* byte  8-23 */
+	__u8 res3[8];	/* byte 24-31 */
+} __attribute__ ((packed));
+
+struct dasd_gneq {
 	struct {
-		struct {
-			unsigned char identifier:2;
-			unsigned char reserved:6;
-		} __attribute__ ((packed)) flags;
-		__u8 selector;
-		__u16 interfaceID;
-		__u32 reserved;
-		__u16 subsystemID;
-		struct {
-			unsigned char sp0:1;
-			unsigned char sp1:1;
-			unsigned char reserved:5;
-			unsigned char scluster:1;
-		} __attribute__ ((packed)) spathID;
-		__u8 unit_address;
-		__u8 dev_ID;
-		__u8 dev_address;
-		__u8 adapterID;
-		__u16 link_address;
-		struct {
-			unsigned char parallel:1;
-			unsigned char escon:1;
-			unsigned char reserved:1;
-			unsigned char ficon:1;
-			unsigned char reserved2:4;
-		} __attribute__ ((packed)) protocol_type;
-		struct {
-			unsigned char PID_in_236:1;
-			unsigned char reserved:7;
-		} __attribute__ ((packed)) format_flags;
-		__u8 log_dev_address;
-		unsigned char reserved2[12];
-	} __attribute__ ((packed)) neq;
+		__u8 identifier:2;
+		__u8 reserved:6;
+	} __attribute__ ((packed)) flags;
+	__u8 reserved[7];
+	__u16 subsystemID;
+	__u8 reserved2[22];
 } __attribute__ ((packed));
 
 struct dasd_eckd_path {
@@ -463,7 +392,14 @@ struct alias_pav_group {
 
 struct dasd_eckd_private {
 	struct dasd_eckd_characteristics rdc_data;
-	struct dasd_eckd_confdata conf_data;
+	u8 *conf_data;
+	int conf_len;
+	/* pointers to specific parts in the conf_data */
+	struct dasd_ned *ned;
+	struct dasd_sneq *sneq;
+	struct vd_sneq *vdsneq;
+	struct dasd_gneq *gneq;
+
 	struct dasd_eckd_path path_data;
 	struct eckd_count count_area[5];
 	int init_cqr_status;
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index fb2f931..31ecaa4 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -307,6 +307,7 @@ struct dasd_uid {
 	__u16 ssid;
 	__u8 real_unit_addr;
 	__u8 base_unit_addr;
+	char vduit[33];
 };
 
 /*
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index 3c8b25e..1fd8f21 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -399,6 +399,7 @@ sclp_tod_from_jiffies(unsigned long jiffies)
 void
 sclp_sync_wait(void)
 {
+	unsigned long long old_tick;
 	unsigned long flags;
 	unsigned long cr0, cr0_sync;
 	u64 timeout;
@@ -419,11 +420,12 @@ sclp_sync_wait(void)
 	if (!irq_context)
 		local_bh_disable();
 	/* Enable service-signal interruption, disable timer interrupts */
+	old_tick = local_tick_disable();
 	trace_hardirqs_on();
 	__ctl_store(cr0, 0, 0);
 	cr0_sync = cr0;
+	cr0_sync &= 0xffff00a0;
 	cr0_sync |= 0x00000200;
-	cr0_sync &= 0xFFFFF3AC;
 	__ctl_load(cr0_sync, 0, 0);
 	__raw_local_irq_stosm(0x01);
 	/* Loop until driver state indicates finished request */
@@ -439,9 +441,9 @@ sclp_sync_wait(void)
 	__ctl_load(cr0, 0, 0);
 	if (!irq_context)
 		_local_bh_enable();
+	local_tick_enable(old_tick);
 	local_irq_restore(flags);
 }
-
 EXPORT_SYMBOL(sclp_sync_wait);
 
 /* Dispatch changes in send and receive mask to registered listeners. */
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 0c2b774..eb5f1b8 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -427,6 +427,8 @@ static int sclp_mem_notifier(struct notifier_block *nb,
 			sclp_attach_storage(id);
 	switch (action) {
 	case MEM_ONLINE:
+	case MEM_GOING_OFFLINE:
+	case MEM_CANCEL_OFFLINE:
 		break;
 	case MEM_GOING_ONLINE:
 		rc = sclp_mem_change_state(start, size, 1);
@@ -434,6 +436,9 @@ static int sclp_mem_notifier(struct notifier_block *nb,
 	case MEM_CANCEL_ONLINE:
 		sclp_mem_change_state(start, size, 0);
 		break;
+	case MEM_OFFLINE:
+		sclp_mem_change_state(start, size, 0);
+		break;
 	default:
 		rc = -EINVAL;
 		break;
diff --git a/drivers/s390/char/sclp_config.c b/drivers/s390/char/sclp_config.c
index fff4ff4..4cebd6e 100644
--- a/drivers/s390/char/sclp_config.c
+++ b/drivers/s390/char/sclp_config.c
@@ -8,7 +8,6 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/cpu.h>
-#include <linux/kthread.h>
 #include <linux/sysdev.h>
 #include <linux/workqueue.h>
 #include <asm/smp.h>
@@ -41,19 +40,9 @@ static void sclp_cpu_capability_notify(struct work_struct *work)
 	put_online_cpus();
 }
 
-static int sclp_cpu_kthread(void *data)
-{
-	smp_rescan_cpus();
-	return 0;
-}
-
 static void __ref sclp_cpu_change_notify(struct work_struct *work)
 {
-	/* Can't call smp_rescan_cpus() from  workqueue context since it may
-	 * deadlock in case of cpu hotplug. So we have to create a kernel
-	 * thread in order to call it.
-	 */
-	kthread_run(sclp_cpu_kthread, NULL, "cpu_rescan");
+	smp_rescan_cpus();
 }
 
 static void sclp_conf_receiver_fn(struct evbuf_header *evbuf)
diff --git a/drivers/s390/cio/idset.c b/drivers/s390/cio/idset.c
index ef7bc0a1..cf8f24a 100644
--- a/drivers/s390/cio/idset.c
+++ b/drivers/s390/cio/idset.c
@@ -5,7 +5,7 @@
  *    Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
  */
 
-#include <linux/slab.h>
+#include <linux/vmalloc.h>
 #include <linux/bitops.h>
 #include "idset.h"
 #include "css.h"
@@ -25,18 +25,18 @@ static struct idset *idset_new(int num_ssid, int num_id)
 {
 	struct idset *set;
 
-	set = kzalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id),
-		      GFP_KERNEL);
+	set = vmalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id));
 	if (set) {
 		set->num_ssid = num_ssid;
 		set->num_id = num_id;
+		memset(set->bitmap, 0, bitmap_size(num_ssid, num_id));
 	}
 	return set;
 }
 
 void idset_free(struct idset *set)
 {
-	kfree(set);
+	vfree(set);
 }
 
 void idset_clear(struct idset *set)
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index d10c73c..d156485 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -1355,7 +1355,7 @@ int qdio_allocate(struct qdio_initialize *init_data)
 		goto out_rel;
 
 	/* qdr is used in ccw1.cda which is u32 */
-	irq_ptr->qdr = kzalloc(sizeof(struct qdr), GFP_KERNEL | GFP_DMA);
+	irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
 	if (!irq_ptr->qdr)
 		goto out_rel;
 	WARN_ON((unsigned long)irq_ptr->qdr & 0xfff);
diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c
index ea01b85..ec5c4a4 100644
--- a/drivers/s390/cio/qdio_perf.c
+++ b/drivers/s390/cio/qdio_perf.c
@@ -142,7 +142,7 @@ int __init qdio_setup_perf_stats(void)
 	return 0;
 }
 
-void __exit qdio_remove_perf_stats(void)
+void qdio_remove_perf_stats(void)
 {
 #ifdef CONFIG_PROC_FS
 	remove_proc_entry("qdio_perf", NULL);
diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c
index f0923a8..1bd2a20 100644
--- a/drivers/s390/cio/qdio_setup.c
+++ b/drivers/s390/cio/qdio_setup.c
@@ -325,7 +325,7 @@ void qdio_release_memory(struct qdio_irq *irq_ptr)
 			kmem_cache_free(qdio_q_cache, q);
 		}
 	}
-	kfree(irq_ptr->qdr);
+	free_page((unsigned long) irq_ptr->qdr);
 	free_page(irq_ptr->chsc_page);
 	free_page((unsigned long) irq_ptr);
 }
@@ -515,7 +515,7 @@ int __init qdio_setup_init(void)
 	return 0;
 }
 
-void __exit qdio_setup_exit(void)
+void qdio_setup_exit(void)
 {
 	kmem_cache_destroy(qdio_q_cache);
 }
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index 79954bd..292b60d 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -352,7 +352,7 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count)
 	return len;
 }
 
-void s390_virtio_console_init(void)
+void __init s390_virtio_console_init(void)
 {
 	virtio_cons_early_init(early_put_chars);
 }
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 1895dbb..80971c2 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -419,6 +419,7 @@ struct qeth_qdio_out_buffer {
 	int next_element_to_fill;
 	struct sk_buff_head skb_list;
 	struct list_head ctx_list;
+	int is_header[16];
 };
 
 struct qeth_card;
@@ -785,7 +786,7 @@ void qeth_core_remove_osn_attributes(struct device *);
 
 /* exports for qeth discipline device drivers */
 extern struct qeth_card_list_struct qeth_core_card_list;
-
+extern struct kmem_cache *qeth_core_header_cache;
 extern struct qeth_dbf_info qeth_dbf[QETH_DBF_INFOS];
 
 void qeth_set_allowed_threads(struct qeth_card *, unsigned long , int);
@@ -843,7 +844,7 @@ int qeth_get_priority_queue(struct qeth_card *, struct sk_buff *, int, int);
 int qeth_get_elements_no(struct qeth_card *, void *, struct sk_buff *, int);
 int qeth_do_send_packet_fast(struct qeth_card *, struct qeth_qdio_out_q *,
 			struct sk_buff *, struct qeth_hdr *, int,
-			struct qeth_eddp_context *);
+			struct qeth_eddp_context *, int, int);
 int qeth_do_send_packet(struct qeth_card *, struct qeth_qdio_out_q *,
 		    struct sk_buff *, struct qeth_hdr *,
 		    int, struct qeth_eddp_context *);
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index cebb25e..bd420d1 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -19,8 +19,8 @@
 #include <linux/mii.h>
 #include <linux/kthread.h>
 
-#include <asm-s390/ebcdic.h>
-#include <asm-s390/io.h>
+#include <asm/ebcdic.h>
+#include <asm/io.h>
 #include <asm/s390_rdev.h>
 
 #include "qeth_core.h"
@@ -48,6 +48,8 @@ EXPORT_SYMBOL_GPL(qeth_dbf);
 
 struct qeth_card_list_struct qeth_core_card_list;
 EXPORT_SYMBOL_GPL(qeth_core_card_list);
+struct kmem_cache *qeth_core_header_cache;
+EXPORT_SYMBOL_GPL(qeth_core_header_cache);
 
 static struct device *qeth_core_root_dev;
 static unsigned int known_devices[][10] = QETH_MODELLIST_ARRAY;
@@ -933,6 +935,10 @@ static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
 	}
 	qeth_eddp_buf_release_contexts(buf);
 	for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(queue->card); ++i) {
+		if (buf->buffer->element[i].addr && buf->is_header[i])
+			kmem_cache_free(qeth_core_header_cache,
+				buf->buffer->element[i].addr);
+		buf->is_header[i] = 0;
 		buf->buffer->element[i].length = 0;
 		buf->buffer->element[i].addr = NULL;
 		buf->buffer->element[i].flags = 0;
@@ -3002,8 +3008,8 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr,
 	if (skb_shinfo(skb)->nr_frags > 0)
 		elements_needed = (skb_shinfo(skb)->nr_frags + 1);
 	if (elements_needed == 0)
-		elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE)
-			+ skb->len) >> PAGE_SHIFT);
+		elements_needed = 1 + (((((unsigned long) skb->data) %
+				PAGE_SIZE) + skb->len) >> PAGE_SHIFT);
 	if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) {
 		QETH_DBF_MESSAGE(2, "Invalid size of IP packet "
 			"(Number=%d / Length=%d). Discarded.\n",
@@ -3015,7 +3021,8 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr,
 EXPORT_SYMBOL_GPL(qeth_get_elements_no);
 
 static inline void __qeth_fill_buffer(struct sk_buff *skb,
-	struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill)
+	struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill,
+	int offset)
 {
 	int length = skb->len;
 	int length_here;
@@ -3027,6 +3034,11 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb,
 	data = skb->data;
 	first_lap = (is_tso == 0 ? 1 : 0);
 
+	if (offset >= 0) {
+		data = skb->data + offset;
+		first_lap = 0;
+	}
+
 	while (length > 0) {
 		/* length_here is the remaining amount of data in this page */
 		length_here = PAGE_SIZE - ((unsigned long) data % PAGE_SIZE);
@@ -3058,22 +3070,22 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb,
 }
 
 static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue,
-		struct qeth_qdio_out_buffer *buf, struct sk_buff *skb)
+		struct qeth_qdio_out_buffer *buf, struct sk_buff *skb,
+		struct qeth_hdr *hdr, int offset, int hd_len)
 {
 	struct qdio_buffer *buffer;
-	struct qeth_hdr_tso *hdr;
 	int flush_cnt = 0, hdr_len, large_send = 0;
 
 	buffer = buf->buffer;
 	atomic_inc(&skb->users);
 	skb_queue_tail(&buf->skb_list, skb);
 
-	hdr  = (struct qeth_hdr_tso *) skb->data;
 	/*check first on TSO ....*/
-	if (hdr->hdr.hdr.l3.id == QETH_HEADER_TYPE_TSO) {
+	if (hdr->hdr.l3.id == QETH_HEADER_TYPE_TSO) {
 		int element = buf->next_element_to_fill;
 
-		hdr_len = sizeof(struct qeth_hdr_tso) + hdr->ext.dg_hdr_len;
+		hdr_len = sizeof(struct qeth_hdr_tso) +
+			((struct qeth_hdr_tso *)hdr)->ext.dg_hdr_len;
 		/*fill first buffer entry only with header information */
 		buffer->element[element].addr = skb->data;
 		buffer->element[element].length = hdr_len;
@@ -3083,9 +3095,20 @@ static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue,
 		skb->len  -= hdr_len;
 		large_send = 1;
 	}
+
+	if (offset >= 0) {
+		int element = buf->next_element_to_fill;
+		buffer->element[element].addr = hdr;
+		buffer->element[element].length = sizeof(struct qeth_hdr) +
+							hd_len;
+		buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG;
+		buf->is_header[element] = 1;
+		buf->next_element_to_fill++;
+	}
+
 	if (skb_shinfo(skb)->nr_frags == 0)
 		__qeth_fill_buffer(skb, buffer, large_send,
-				   (int *)&buf->next_element_to_fill);
+				(int *)&buf->next_element_to_fill, offset);
 	else
 		__qeth_fill_buffer_frag(skb, buffer, large_send,
 					(int *)&buf->next_element_to_fill);
@@ -3115,7 +3138,7 @@ static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue,
 int qeth_do_send_packet_fast(struct qeth_card *card,
 		struct qeth_qdio_out_q *queue, struct sk_buff *skb,
 		struct qeth_hdr *hdr, int elements_needed,
-		struct qeth_eddp_context *ctx)
+		struct qeth_eddp_context *ctx, int offset, int hd_len)
 {
 	struct qeth_qdio_out_buffer *buffer;
 	int buffers_needed = 0;
@@ -3148,7 +3171,7 @@ int qeth_do_send_packet_fast(struct qeth_card *card,
 	}
 	atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
 	if (ctx == NULL) {
-		qeth_fill_buffer(queue, buffer, skb);
+		qeth_fill_buffer(queue, buffer, skb, hdr, offset, hd_len);
 		qeth_flush_buffers(queue, index, 1);
 	} else {
 		flush_cnt = qeth_eddp_fill_buffer(queue, ctx, index);
@@ -3224,7 +3247,7 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue,
 		}
 	}
 	if (ctx == NULL)
-		tmp = qeth_fill_buffer(queue, buffer, skb);
+		tmp = qeth_fill_buffer(queue, buffer, skb, hdr, -1, 0);
 	else {
 		tmp = qeth_eddp_fill_buffer(queue, ctx,
 						queue->next_buf_to_fill);
@@ -4443,8 +4466,17 @@ static int __init qeth_core_init(void)
 	rc = IS_ERR(qeth_core_root_dev) ? PTR_ERR(qeth_core_root_dev) : 0;
 	if (rc)
 		goto register_err;
-	return 0;
 
+	qeth_core_header_cache = kmem_cache_create("qeth_hdr",
+			sizeof(struct qeth_hdr) + ETH_HLEN, 64, 0, NULL);
+	if (!qeth_core_header_cache) {
+		rc = -ENOMEM;
+		goto slab_err;
+	}
+
+	return 0;
+slab_err:
+	s390_root_dev_unregister(qeth_core_root_dev);
 register_err:
 	driver_remove_file(&qeth_core_ccwgroup_driver.driver,
 			   &driver_attr_group);
@@ -4466,6 +4498,7 @@ static void __exit qeth_core_exit(void)
 			   &driver_attr_group);
 	ccwgroup_driver_unregister(&qeth_core_ccwgroup_driver);
 	ccw_driver_unregister(&qeth_ccw_driver);
+	kmem_cache_destroy(qeth_core_header_cache);
 	qeth_unregister_dbf_views();
 	PRINT_INFO("core functions removed\n");
 }
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index a8b069c..b3cee03 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -243,8 +243,7 @@ static void qeth_l2_get_packet_type(struct qeth_card *card,
 static void qeth_l2_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
 			struct sk_buff *skb, int ipv, int cast_type)
 {
-	struct vlan_ethhdr *veth = (struct vlan_ethhdr *)((skb->data) +
-					QETH_HEADER_SIZE);
+	struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb_mac_header(skb);
 
 	memset(hdr, 0, sizeof(struct qeth_hdr));
 	hdr->hdr.l2.id = QETH_HEADER_TYPE_LAYER2;
@@ -621,6 +620,9 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int tx_bytes = skb->len;
 	enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
 	struct qeth_eddp_context *ctx = NULL;
+	int data_offset = -1;
+	int elements_needed = 0;
+	int hd_len = 0;
 
 	if ((card->state != CARD_STATE_UP) || !card->lan_online) {
 		card->stats.tx_carrier_errors++;
@@ -643,13 +645,32 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (card->info.type == QETH_CARD_TYPE_OSN)
 		hdr = (struct qeth_hdr *)skb->data;
 	else {
-		/* create a clone with writeable headroom */
-		new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr));
-		if (!new_skb)
-			goto tx_drop;
-		hdr = (struct qeth_hdr *)skb_push(new_skb,
+		if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
+		    (skb_shinfo(skb)->nr_frags == 0)) {
+			new_skb = skb;
+			data_offset = ETH_HLEN;
+			hd_len = ETH_HLEN;
+			hdr = kmem_cache_alloc(qeth_core_header_cache,
+						GFP_ATOMIC);
+			if (!hdr)
+				goto tx_drop;
+			elements_needed++;
+			skb_reset_mac_header(new_skb);
+			qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+			hdr->hdr.l2.pkt_length = new_skb->len;
+			memcpy(((char *)hdr) + sizeof(struct qeth_hdr),
+				skb_mac_header(new_skb), ETH_HLEN);
+		} else {
+			/* create a clone with writeable headroom */
+			new_skb = skb_realloc_headroom(skb,
+						sizeof(struct qeth_hdr));
+			if (!new_skb)
+				goto tx_drop;
+			hdr = (struct qeth_hdr *)skb_push(new_skb,
 						sizeof(struct qeth_hdr));
-		qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+			skb_set_mac_header(new_skb, sizeof(struct qeth_hdr));
+			qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+		}
 	}
 
 	if (large_send == QETH_LARGE_SEND_EDDP) {
@@ -660,9 +681,13 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			goto tx_drop;
 		}
 	} else {
-		elements = qeth_get_elements_no(card, (void *)hdr, new_skb, 0);
-		if (!elements)
+		elements = qeth_get_elements_no(card, (void *)hdr, new_skb,
+						elements_needed);
+		if (!elements) {
+			if (data_offset >= 0)
+				kmem_cache_free(qeth_core_header_cache, hdr);
 			goto tx_drop;
+		}
 	}
 
 	if ((large_send == QETH_LARGE_SEND_NO) &&
@@ -674,7 +699,7 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 					 elements, ctx);
 	else
 		rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr,
-					      elements, ctx);
+					elements, ctx, data_offset, hd_len);
 	if (!rc) {
 		card->stats.tx_packets++;
 		card->stats.tx_bytes += tx_bytes;
@@ -701,6 +726,9 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (ctx != NULL)
 			qeth_eddp_put_context(ctx);
 
+		if (data_offset >= 0)
+			kmem_cache_free(qeth_core_header_cache, hdr);
+
 		if (rc == -EBUSY) {
 			if (new_skb != skb)
 				dev_kfree_skb_any(new_skb);
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 3e1d138..dd72c3c 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2604,6 +2604,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int tx_bytes = skb->len;
 	enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
 	struct qeth_eddp_context *ctx = NULL;
+	int data_offset = -1;
 
 	if ((card->info.type == QETH_CARD_TYPE_IQD) &&
 	    (skb->protocol != htons(ETH_P_IPV6)) &&
@@ -2624,14 +2625,28 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		card->perf_stats.outbound_start_time = qeth_get_micros();
 	}
 
-	/* create a clone with writeable headroom */
-	new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso) +
-					VLAN_HLEN);
-	if (!new_skb)
-		goto tx_drop;
+	if (skb_is_gso(skb))
+		large_send = card->options.large_send;
+
+	if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
+	    (skb_shinfo(skb)->nr_frags == 0)) {
+		new_skb = skb;
+		data_offset = ETH_HLEN;
+		hdr = kmem_cache_alloc(qeth_core_header_cache, GFP_ATOMIC);
+		if (!hdr)
+			goto tx_drop;
+		elements_needed++;
+	} else {
+		/* create a clone with writeable headroom */
+		new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso)
+					+ VLAN_HLEN);
+		if (!new_skb)
+			goto tx_drop;
+	}
 
 	if (card->info.type == QETH_CARD_TYPE_IQD) {
-		skb_pull(new_skb, ETH_HLEN);
+		if (data_offset < 0)
+			skb_pull(new_skb, ETH_HLEN);
 	} else {
 		if (new_skb->protocol == htons(ETH_P_IP)) {
 			if (card->dev->type == ARPHRD_IEEE802_TR)
@@ -2657,9 +2672,6 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	netif_stop_queue(dev);
 
-	if (skb_is_gso(new_skb))
-		large_send = card->options.large_send;
-
 	/* fix hardware limitation: as long as we do not have sbal
 	 * chaining we can not send long frag lists so we temporary
 	 * switch to EDDP
@@ -2677,9 +2689,16 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		qeth_tso_fill_header(card, hdr, new_skb);
 		elements_needed++;
 	} else {
-		hdr = (struct qeth_hdr *)skb_push(new_skb,
+		if (data_offset < 0) {
+			hdr = (struct qeth_hdr *)skb_push(new_skb,
 						sizeof(struct qeth_hdr));
-		qeth_l3_fill_header(card, hdr, new_skb, ipv, cast_type);
+			qeth_l3_fill_header(card, hdr, new_skb, ipv,
+						cast_type);
+		} else {
+			qeth_l3_fill_header(card, hdr, new_skb, ipv,
+						cast_type);
+			hdr->hdr.l3.length = new_skb->len - data_offset;
+		}
 	}
 
 	if (large_send == QETH_LARGE_SEND_EDDP) {
@@ -2695,8 +2714,11 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	} else {
 		int elems = qeth_get_elements_no(card, (void *)hdr, new_skb,
 						 elements_needed);
-		if (!elems)
+		if (!elems) {
+			if (data_offset >= 0)
+				kmem_cache_free(qeth_core_header_cache, hdr);
 			goto tx_drop;
+		}
 		elements_needed += elems;
 	}
 
@@ -2709,7 +2731,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 					 elements_needed, ctx);
 	else
 		rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr,
-					      elements_needed, ctx);
+					elements_needed, ctx, data_offset, 0);
 
 	if (!rc) {
 		card->stats.tx_packets++;
@@ -2737,6 +2759,9 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (ctx != NULL)
 			qeth_eddp_put_context(ctx);
 
+		if (data_offset >= 0)
+			kmem_cache_free(qeth_core_header_cache, hdr);
+
 		if (rc == -EBUSY) {
 			if (new_skb != skb)
 				dev_kfree_skb_any(new_skb);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index a97f1ae..342e12f 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1885,7 +1885,7 @@ static int serial8250_startup(struct uart_port *port)
 		 * the interrupt is enabled.  Delays are necessary to
 		 * allow register changes to become visible.
 		 */
-		spin_lock(&up->port.lock);
+		spin_lock_irqsave(&up->port.lock, flags);
 		if (up->port.flags & UPF_SHARE_IRQ)
 			disable_irq_nosync(up->port.irq);
 
@@ -1901,7 +1901,7 @@ static int serial8250_startup(struct uart_port *port)
 
 		if (up->port.flags & UPF_SHARE_IRQ)
 			enable_irq(up->port.irq);
-		spin_unlock(&up->port.lock);
+		spin_unlock_irqrestore(&up->port.lock, flags);
 
 		/*
 		 * If the interrupt is not reasserted, setup a timer to
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 3a0bbbe..7e7383e 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -42,7 +42,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328serial.o
 obj-$(CONFIG_SERIAL_68360) += 68360serial.o
 obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
 obj-$(CONFIG_SERIAL_MCF) += mcf.o
-obj-$(CONFIG_V850E_UART) += v850e_uart.o
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
 obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
 obj-$(CONFIG_SERIAL_DZ) += dz.o
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 5c76e0a..7274b52 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -50,6 +50,15 @@
 
 #define SCC_WAIT_CLOSING 100
 
+#define GPIO_CTS	0
+#define GPIO_RTS	1
+#define GPIO_DCD	2
+#define GPIO_DSR	3
+#define GPIO_DTR	4
+#define GPIO_RI		5
+
+#define NUM_GPIOS	(GPIO_RI+1)
+
 struct uart_cpm_port {
 	struct uart_port	port;
 	u16			rx_nrfifos;
@@ -68,6 +77,7 @@ struct uart_cpm_port {
 	unsigned char		*rx_buf;
 	u32			flags;
 	void			(*set_lineif)(struct uart_cpm_port *);
+	struct clk		*clk;
 	u8			brg;
 	uint			 dp_addr;
 	void			*mem_addr;
@@ -82,6 +92,7 @@ struct uart_cpm_port {
 	int			wait_closing;
 	/* value to combine with opcode to form cpm command */
 	u32			command;
+	int			gpios[NUM_GPIOS];
 };
 
 extern int cpm_uart_nr;
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index a4f8692..25efca5 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -43,6 +43,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/fs_uart_pd.h>
 #include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -96,13 +99,41 @@ static unsigned int cpm_uart_tx_empty(struct uart_port *port)
 
 static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-	/* Whee. Do nothing. */
+	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+
+	if (pinfo->gpios[GPIO_RTS] >= 0)
+		gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS));
+
+	if (pinfo->gpios[GPIO_DTR] >= 0)
+		gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR));
 }
 
 static unsigned int cpm_uart_get_mctrl(struct uart_port *port)
 {
-	/* Whee. Do nothing. */
-	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+	unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+
+	if (pinfo->gpios[GPIO_CTS] >= 0) {
+		if (gpio_get_value(pinfo->gpios[GPIO_CTS]))
+			mctrl &= ~TIOCM_CTS;
+	}
+
+	if (pinfo->gpios[GPIO_DSR] >= 0) {
+		if (gpio_get_value(pinfo->gpios[GPIO_DSR]))
+			mctrl &= ~TIOCM_DSR;
+	}
+
+	if (pinfo->gpios[GPIO_DCD] >= 0) {
+		if (gpio_get_value(pinfo->gpios[GPIO_DCD]))
+			mctrl &= ~TIOCM_CAR;
+	}
+
+	if (pinfo->gpios[GPIO_RI] >= 0) {
+		if (!gpio_get_value(pinfo->gpios[GPIO_RI]))
+			mctrl |= TIOCM_RNG;
+	}
+
+	return mctrl;
 }
 
 /*
@@ -566,7 +597,10 @@ static void cpm_uart_set_termios(struct uart_port *port,
 		out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
 	}
 
-	cpm_set_brg(pinfo->brg - 1, baud);
+	if (pinfo->clk)
+		clk_set_rate(pinfo->clk, baud);
+	else
+		cpm_set_brg(pinfo->brg - 1, baud);
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
@@ -991,14 +1025,23 @@ static int cpm_uart_init_port(struct device_node *np,
 	void __iomem *mem, *pram;
 	int len;
 	int ret;
+	int i;
 
-	data = of_get_property(np, "fsl,cpm-brg", &len);
-	if (!data || len != 4) {
-		printk(KERN_ERR "CPM UART %s has no/invalid "
-		                "fsl,cpm-brg property.\n", np->name);
-		return -EINVAL;
+	data = of_get_property(np, "clock", NULL);
+	if (data) {
+		struct clk *clk = clk_get(NULL, (const char*)data);
+		if (!IS_ERR(clk))
+			pinfo->clk = clk;
+	}
+	if (!pinfo->clk) {
+		data = of_get_property(np, "fsl,cpm-brg", &len);
+		if (!data || len != 4) {
+			printk(KERN_ERR "CPM UART %s has no/invalid "
+			                "fsl,cpm-brg property.\n", np->name);
+			return -EINVAL;
+		}
+		pinfo->brg = *data;
 	}
-	pinfo->brg = *data;
 
 	data = of_get_property(np, "fsl,cpm-command", &len);
 	if (!data || len != 4) {
@@ -1050,6 +1093,9 @@ static int cpm_uart_init_port(struct device_node *np,
 		goto out_pram;
 	}
 
+	for (i = 0; i < NUM_GPIOS; i++)
+		pinfo->gpios[i] = of_get_gpio(np, i);
+
 	return cpm_uart_request_port(&pinfo->port);
 
 out_pram:
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index cd728df..8a0749e 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -451,19 +451,21 @@ SCIx_FNS(SCxSR,  0x08,  8, 0x10,  8, 0x08, 16, 0x10, 16, 0x04,  8)
 SCIx_FNS(SCxRDR, 0x0a,  8, 0x14,  8, 0x0A,  8, 0x14,  8, 0x05,  8)
 SCIF_FNS(SCFCR,                      0x0c,  8, 0x18, 16)
 #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7763) || \
     defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
+SCIF_FNS(SCFDR,			     0x0e, 16, 0x1C, 16)
 SCIF_FNS(SCTFDR,		     0x0e, 16, 0x1C, 16)
 SCIF_FNS(SCRFDR,		     0x0e, 16, 0x20, 16)
 SCIF_FNS(SCSPTR,			0,  0, 0x24, 16)
 SCIF_FNS(SCLSR,				0,  0, 0x28, 16)
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-/* SH7763 SCIF2 */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 SCIF_FNS(SCFDR,				0,  0, 0x1C, 16)
 SCIF_FNS(SCSPTR2,			0,  0, 0x20, 16)
-SCIF_FNS(SCLSR2, 			0,  0, 0x24, 16)
-#endif /* CONFIG_CPU_SUBTYPE_SH7763 */
+SCIF_FNS(SCLSR2,			0,  0, 0x24, 16)
+SCIF_FNS(SCTFDR,		     0x0e, 16, 0x1C, 16)
+SCIF_FNS(SCRFDR,		     0x0e, 16, 0x20, 16)
+SCIF_FNS(SCSPTR,			0,  0, 0x24, 16)
+SCIF_FNS(SCLSR,				0,  0, 0x28, 16)
 #else
 SCIF_FNS(SCFDR,                      0x0e, 16, 0x1C, 16)
 #if defined(CONFIG_CPU_SUBTYPE_SH7722)
diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c
deleted file mode 100644
index 5acf061..0000000
--- a/drivers/serial/v850e_uart.c
+++ /dev/null
@@ -1,548 +0,0 @@
-/*
- * drivers/serial/v850e_uart.c -- Serial I/O using V850E on-chip UART or UARTB
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This driver supports both the original V850E UART interface (called
-   merely `UART' in the docs) and the newer `UARTB' interface, which is
-   roughly a superset of the first one.  The selection is made at
-   configure time -- if CONFIG_V850E_UARTB is defined, then UARTB is
-   presumed, otherwise the old UART -- as these are on-CPU UARTS, a system
-   can never have both.
-
-   The UARTB interface also has a 16-entry FIFO mode, which is not
-   yet supported by this driver.  */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-
-#include <asm/v850e_uart.h>
-
-/* Initial UART state.  This may be overridden by machine-dependent headers. */
-#ifndef V850E_UART_INIT_BAUD
-#define V850E_UART_INIT_BAUD	115200
-#endif
-#ifndef V850E_UART_INIT_CFLAGS
-#define V850E_UART_INIT_CFLAGS	(B115200 | CS8 | CREAD)
-#endif
-
-/* A string used for prefixing printed descriptions; since the same UART
-   macro is actually used on other chips than the V850E.  This must be a
-   constant string.  */
-#ifndef V850E_UART_CHIP_NAME
-#define V850E_UART_CHIP_NAME	"V850E"
-#endif
-
-#define V850E_UART_MINOR_BASE	64	   /* First tty minor number */
-
-
-/* Low-level UART functions.  */
-
-/* Configure and turn on uart channel CHAN, using the termios `control
-   modes' bits in CFLAGS, and a baud-rate of BAUD.  */
-void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	int flags;
-	v850e_uart_speed_t old_speed;
-	v850e_uart_config_t old_config;
-	v850e_uart_speed_t new_speed = v850e_uart_calc_speed (baud);
-	v850e_uart_config_t new_config = v850e_uart_calc_config (cflags);
-
-	/* Disable interrupts while we're twiddling the hardware.  */
-	local_irq_save (flags);
-
-#ifdef V850E_UART_PRE_CONFIGURE
-	V850E_UART_PRE_CONFIGURE (chan, cflags, baud);
-#endif
-
-	old_config = V850E_UART_CONFIG (chan);
-	old_speed = v850e_uart_speed (chan);
-
-	if (! v850e_uart_speed_eq (old_speed, new_speed)) {
-		/* The baud rate has changed.  First, disable the UART.  */
-		V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_FINI;
-		old_config = 0;	/* Force the uart to be re-initialized. */
-
-		/* Reprogram the baud-rate generator.  */
-		v850e_uart_set_speed (chan, new_speed);
-	}
-
-	if (! (old_config & V850E_UART_CONFIG_ENABLED)) {
-		/* If we are using the uart for the first time, start by
-		   enabling it, which must be done before turning on any
-		   other bits.  */
-		V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_INIT;
-		/* See the initial state.  */
-		old_config = V850E_UART_CONFIG (chan);
-	}
-
-	if (new_config != old_config) {
-		/* Which of the TXE/RXE bits we'll temporarily turn off
-		   before changing other control bits.  */
-		unsigned temp_disable = 0;
-		/* Which of the TXE/RXE bits will be enabled.  */
-		unsigned enable = 0;
-		unsigned changed_bits = new_config ^ old_config;
-
-		/* Which of RX/TX will be enabled in the new configuration.  */
-		if (new_config & V850E_UART_CONFIG_RX_BITS)
-			enable |= (new_config & V850E_UART_CONFIG_RX_ENABLE);
-		if (new_config & V850E_UART_CONFIG_TX_BITS)
-			enable |= (new_config & V850E_UART_CONFIG_TX_ENABLE);
-
-		/* Figure out which of RX/TX needs to be disabled; note
-		   that this will only happen if they're not already
-		   disabled.  */
-		if (changed_bits & V850E_UART_CONFIG_RX_BITS)
-			temp_disable
-				|= (old_config & V850E_UART_CONFIG_RX_ENABLE);
-		if (changed_bits & V850E_UART_CONFIG_TX_BITS)
-			temp_disable
-				|= (old_config & V850E_UART_CONFIG_TX_ENABLE);
-
-		/* We have to turn off RX and/or TX mode before changing
-		   any associated control bits.  */
-		if (temp_disable)
-			V850E_UART_CONFIG (chan) = old_config & ~temp_disable;
-
-		/* Write the new control bits, while RX/TX are disabled. */ 
-		if (changed_bits & ~enable)
-			V850E_UART_CONFIG (chan) = new_config & ~enable;
-
-		v850e_uart_config_delay (new_config, new_speed);
-
-		/* Write the final version, with enable bits turned on.  */
-		V850E_UART_CONFIG (chan) = new_config;
-	}
-
-	local_irq_restore (flags);
-}
-
-
-/*  Low-level console. */
-
-#ifdef CONFIG_V850E_UART_CONSOLE
-
-static void v850e_uart_cons_write (struct console *co,
-				   const char *s, unsigned count)
-{
-	if (count > 0) {
-		unsigned chan = co->index;
-		unsigned irq = V850E_UART_TX_IRQ (chan);
-		int irq_was_enabled, irq_was_pending, flags;
-
-		/* We don't want to get `transmission completed'
-		   interrupts, since we're busy-waiting, so we disable them
-		   while sending (we don't disable interrupts entirely
-		   because sending over a serial line is really slow).  We
-		   save the status of the tx interrupt and restore it when
-		   we're done so that using printk doesn't interfere with
-		   normal serial transmission (other than interleaving the
-		   output, of course!).  This should work correctly even if
-		   this function is interrupted and the interrupt printks
-		   something.  */
-
-		/* Disable interrupts while fiddling with tx interrupt.  */
-		local_irq_save (flags);
-		/* Get current tx interrupt status.  */
-		irq_was_enabled = v850e_intc_irq_enabled (irq);
-		irq_was_pending = v850e_intc_irq_pending (irq);
-		/* Disable tx interrupt if necessary.  */
-		if (irq_was_enabled)
-			v850e_intc_disable_irq (irq);
-		/* Turn interrupts back on.  */
-		local_irq_restore (flags);
-
-		/* Send characters.  */
-		while (count > 0) {
-			int ch = *s++;
-
-			if (ch == '\n') {
-				/* We don't have the benefit of a tty
-				   driver, so translate NL into CR LF.  */
-				v850e_uart_wait_for_xmit_ok (chan);
-				v850e_uart_putc (chan, '\r');
-			}
-
-			v850e_uart_wait_for_xmit_ok (chan);
-			v850e_uart_putc (chan, ch);
-
-			count--;
-		}
-
-		/* Restore saved tx interrupt status.  */
-		if (irq_was_enabled) {
-			/* Wait for the last character we sent to be
-			   completely transmitted (as we'll get an
-			   interrupt interrupt at that point).  */
-			v850e_uart_wait_for_xmit_done (chan);
-			/* Clear pending interrupts received due
-			   to our transmission, unless there was already
-			   one pending, in which case we want the
-			   handler to be called.  */
-			if (! irq_was_pending)
-				v850e_intc_clear_pending_irq (irq);
-			/* ... and then turn back on handling.  */
-			v850e_intc_enable_irq (irq);
-		}
-	}
-}
-
-extern struct uart_driver v850e_uart_driver;
-static struct console v850e_uart_cons =
-{
-    .name	= "ttyS",
-    .write	= v850e_uart_cons_write,
-    .device	= uart_console_device,
-    .flags	= CON_PRINTBUFFER,
-    .cflag	= V850E_UART_INIT_CFLAGS,
-    .index	= -1,
-    .data	= &v850e_uart_driver,
-};
-
-void v850e_uart_cons_init (unsigned chan)
-{
-	v850e_uart_configure (chan, V850E_UART_INIT_CFLAGS,
-			      V850E_UART_INIT_BAUD);
-	v850e_uart_cons.index = chan;
-	register_console (&v850e_uart_cons);
-	printk ("Console: %s on-chip UART channel %d\n",
-		V850E_UART_CHIP_NAME, chan);
-}
-
-/* This is what the init code actually calls.  */
-static int v850e_uart_console_init (void)
-{
-	v850e_uart_cons_init (V850E_UART_CONSOLE_CHANNEL);
-	return 0;
-}
-console_initcall(v850e_uart_console_init);
-
-#define V850E_UART_CONSOLE &v850e_uart_cons
-
-#else /* !CONFIG_V850E_UART_CONSOLE */
-#define V850E_UART_CONSOLE 0
-#endif /* CONFIG_V850E_UART_CONSOLE */
-
-/* TX/RX interrupt handlers.  */
-
-static void v850e_uart_stop_tx (struct uart_port *port);
-
-void v850e_uart_tx (struct uart_port *port)
-{
-	struct circ_buf *xmit = &port->info->xmit;
-	int stopped = uart_tx_stopped (port);
-
-	if (v850e_uart_xmit_ok (port->line)) {
-		int tx_ch;
-
-		if (port->x_char) {
-			tx_ch = port->x_char;
-			port->x_char = 0;
-		} else if (!uart_circ_empty (xmit) && !stopped) {
-			tx_ch = xmit->buf[xmit->tail];
-			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		} else
-			goto no_xmit;
-
-		v850e_uart_putc (port->line, tx_ch);
-		port->icount.tx++;
-
-		if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS)
-			uart_write_wakeup (port);
-	}
-
- no_xmit:
-	if (uart_circ_empty (xmit) || stopped)
-		v850e_uart_stop_tx (port, stopped);
-}
-
-static irqreturn_t v850e_uart_tx_irq(int irq, void *data)
-{
-	struct uart_port *port = data;
-	v850e_uart_tx (port);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t v850e_uart_rx_irq(int irq, void *data)
-{
-	struct uart_port *port = data;
-	unsigned ch_stat = TTY_NORMAL;
-	unsigned ch = v850e_uart_getc (port->line);
-	unsigned err = v850e_uart_err (port->line);
-
-	if (err) {
-		if (err & V850E_UART_ERR_OVERRUN) {
-			ch_stat = TTY_OVERRUN;
-			port->icount.overrun++;
-		} else if (err & V850E_UART_ERR_FRAME) {
-			ch_stat = TTY_FRAME;
-			port->icount.frame++;
-		} else if (err & V850E_UART_ERR_PARITY) {
-			ch_stat = TTY_PARITY;
-			port->icount.parity++;
-		}
-	}
-
-	port->icount.rx++;
-
-	tty_insert_flip_char (port->info->port.tty, ch, ch_stat);
-	tty_schedule_flip (port->info->port.tty);
-
-	return IRQ_HANDLED;
-}
-
-
-/* Control functions for the serial framework.  */
-
-static void v850e_uart_nop (struct uart_port *port) { }
-static int v850e_uart_success (struct uart_port *port) { return 0; }
-
-static unsigned v850e_uart_tx_empty (struct uart_port *port)
-{
-	return TIOCSER_TEMT;	/* Can't detect.  */
-}
-
-static void v850e_uart_set_mctrl (struct uart_port *port, unsigned mctrl)
-{
-#ifdef V850E_UART_SET_RTS
-	V850E_UART_SET_RTS (port->line, (mctrl & TIOCM_RTS));
-#endif
-}
-
-static unsigned v850e_uart_get_mctrl (struct uart_port *port)
-{
-	/* We don't support DCD or DSR, so consider them permanently active. */
-	int mctrl = TIOCM_CAR | TIOCM_DSR;
-
-	/* We may support CTS.  */
-#ifdef V850E_UART_CTS
-	mctrl |= V850E_UART_CTS(port->line) ? TIOCM_CTS : 0;
-#else
-	mctrl |= TIOCM_CTS;
-#endif
-
-	return mctrl;
-}
-
-static void v850e_uart_start_tx (struct uart_port *port)
-{
-	v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line));
-	v850e_uart_tx (port);
-	v850e_intc_enable_irq (V850E_UART_TX_IRQ (port->line));
-}
-
-static void v850e_uart_stop_tx (struct uart_port *port)
-{
-	v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line));
-}
-
-static void v850e_uart_start_rx (struct uart_port *port)
-{
-	v850e_intc_enable_irq (V850E_UART_RX_IRQ (port->line));
-}
-
-static void v850e_uart_stop_rx (struct uart_port *port)
-{
-	v850e_intc_disable_irq (V850E_UART_RX_IRQ (port->line));
-}
-
-static void v850e_uart_break_ctl (struct uart_port *port, int break_ctl)
-{
-	/* Umm, do this later.  */
-}
-
-static int v850e_uart_startup (struct uart_port *port)
-{
-	int err;
-
-	/* Alloc RX irq.  */
-	err = request_irq (V850E_UART_RX_IRQ (port->line), v850e_uart_rx_irq,
-			   IRQF_DISABLED, "v850e_uart", port);
-	if (err)
-		return err;
-
-	/* Alloc TX irq.  */
-	err = request_irq (V850E_UART_TX_IRQ (port->line), v850e_uart_tx_irq,
-			   IRQF_DISABLED, "v850e_uart", port);
-	if (err) {
-		free_irq (V850E_UART_RX_IRQ (port->line), port);
-		return err;
-	}
-
-	v850e_uart_start_rx (port);
-
-	return 0;
-}
-
-static void v850e_uart_shutdown (struct uart_port *port)
-{
-	/* Disable port interrupts.  */
-	free_irq (V850E_UART_TX_IRQ (port->line), port);
-	free_irq (V850E_UART_RX_IRQ (port->line), port);
-
-	/* Turn off xmit/recv enable bits.  */
-	V850E_UART_CONFIG (port->line)
-		&= ~(V850E_UART_CONFIG_TX_ENABLE
-		     | V850E_UART_CONFIG_RX_ENABLE);
-	/* Then reset the channel.  */
-	V850E_UART_CONFIG (port->line) = 0;
-}
-
-static void
-v850e_uart_set_termios (struct uart_port *port, struct ktermios *termios,
-		        struct ktermios *old)
-{
-	unsigned cflags = termios->c_cflag;
-
-	/* Restrict flags to legal values.  */
-	if ((cflags & CSIZE) != CS7 && (cflags & CSIZE) != CS8)
-		/* The new value of CSIZE is invalid, use the old value.  */
-		cflags = (cflags & ~CSIZE)
-			| (old ? (old->c_cflag & CSIZE) : CS8);
-
-	termios->c_cflag = cflags;
-
-	v850e_uart_configure (port->line, cflags,
-			      uart_get_baud_rate (port, termios, old,
-						  v850e_uart_min_baud(),
-						  v850e_uart_max_baud()));
-}
-
-static const char *v850e_uart_type (struct uart_port *port)
-{
-	return port->type == PORT_V850E_UART ? "v850e_uart" : 0;
-}
-
-static void v850e_uart_config_port (struct uart_port *port, int flags)
-{
-	if (flags & UART_CONFIG_TYPE)
-		port->type = PORT_V850E_UART;
-}
-
-static int
-v850e_uart_verify_port (struct uart_port *port, struct serial_struct *ser)
-{
-	if (ser->type != PORT_UNKNOWN && ser->type != PORT_V850E_UART)
-		return -EINVAL;
-	if (ser->irq != V850E_UART_TX_IRQ (port->line))
-		return -EINVAL;
-	return 0;
-}
-
-static struct uart_ops v850e_uart_ops = {
-	.tx_empty	= v850e_uart_tx_empty,
-	.get_mctrl	= v850e_uart_get_mctrl,
-	.set_mctrl	= v850e_uart_set_mctrl,
-	.start_tx	= v850e_uart_start_tx,
-	.stop_tx	= v850e_uart_stop_tx,
-	.stop_rx	= v850e_uart_stop_rx,
-	.enable_ms	= v850e_uart_nop,
-	.break_ctl	= v850e_uart_break_ctl,
-	.startup	= v850e_uart_startup,
-	.shutdown	= v850e_uart_shutdown,
-	.set_termios	= v850e_uart_set_termios,
-	.type		= v850e_uart_type,
-	.release_port	= v850e_uart_nop,
-	.request_port	= v850e_uart_success,
-	.config_port	= v850e_uart_config_port,
-	.verify_port	= v850e_uart_verify_port,
-};
-
-/* Initialization and cleanup.  */
-
-static struct uart_driver v850e_uart_driver = {
-	.owner			= THIS_MODULE,
-	.driver_name		= "v850e_uart",
-	.dev_name		= "ttyS",
-	.major			= TTY_MAJOR,
-	.minor			= V850E_UART_MINOR_BASE,
-	.nr			= V850E_UART_NUM_CHANNELS,
-	.cons			= V850E_UART_CONSOLE,
-};
-
-
-static struct uart_port v850e_uart_ports[V850E_UART_NUM_CHANNELS];
-
-static int __init v850e_uart_init (void)
-{
-	int rval;
-
-	printk (KERN_INFO "%s on-chip UART\n", V850E_UART_CHIP_NAME);
-
-	rval = uart_register_driver (&v850e_uart_driver);
-	if (rval == 0) {
-		unsigned chan;
-
-		for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++) {
-			struct uart_port *port = &v850e_uart_ports[chan];
-			
-			memset (port, 0, sizeof *port);
-
-			port->ops = &v850e_uart_ops;
-			port->line = chan;
-			port->iotype = UPIO_MEM;
-			port->flags = UPF_BOOT_AUTOCONF;
-
-			/* We actually use multiple IRQs, but the serial
-			   framework seems to mainly use this for
-			   informational purposes anyway.  Here we use the TX
-			   irq.  */
-			port->irq = V850E_UART_TX_IRQ (chan);
-
-			/* The serial framework doesn't really use these
-			   membase/mapbase fields for anything useful, but
-			   it requires that they be something non-zero to
-			   consider the port `valid', and also uses them
-			   for informational purposes.  */
-			port->membase = (void *)V850E_UART_BASE_ADDR (chan);
-			port->mapbase = V850E_UART_BASE_ADDR (chan);
-
-			/* The framework insists on knowing the uart's master
-			   clock freq, though it doesn't seem to do anything
-			   useful for us with it.  We must make it at least
-			   higher than (the maximum baud rate * 16), otherwise
-			   the framework will puke during its internal
-			   calculations, and force the baud rate to be 9600.
-			   To be accurate though, just repeat the calculation
-			   we use when actually setting the speed.  */
-			port->uartclk = v850e_uart_max_clock() * 16;
-
-			uart_add_one_port (&v850e_uart_driver, port);
-		}
-	}
-
-	return rval;
-}
-
-static void __exit v850e_uart_exit (void)
-{
-	unsigned chan;
-
-	for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++)
-		uart_remove_one_port (&v850e_uart_driver,
-				      &v850e_uart_ports[chan]);
-
-	uart_unregister_driver (&v850e_uart_driver);
-}
-
-module_init (v850e_uart_init);
-module_exit (v850e_uart_exit);
-
-MODULE_AUTHOR ("Miles Bader");
-MODULE_DESCRIPTION ("NEC " V850E_UART_CHIP_NAME " on-chip UART");
-MODULE_LICENSE ("GPL");
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index 617efb1..be97789 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -24,13 +24,12 @@
 #include <linux/slab.h>
 #include <linux/maple.h>
 #include <linux/dma-mapping.h>
+#include <linux/delay.h>
 #include <asm/cacheflush.h>
 #include <asm/dma.h>
 #include <asm/io.h>
-#include <asm/mach/dma.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/maple.h>
-#include <linux/delay.h>
+#include <mach/dma.h>
+#include <mach/sysasic.h>
 
 MODULE_AUTHOR("Yaegshi Takeshi, Paul Mundt, M.R. Brown, Adrian McMenamin");
 MODULE_DESCRIPTION("Maple bus driver for Dreamcast");
@@ -46,14 +45,15 @@ static DECLARE_WORK(maple_vblank_process, maple_vblank_handler);
 static LIST_HEAD(maple_waitq);
 static LIST_HEAD(maple_sentq);
 
-static DEFINE_MUTEX(maple_list_lock);
+/* mutex to protect queue of waiting packets */
+static DEFINE_MUTEX(maple_wlist_lock);
 
 static struct maple_driver maple_dummy_driver;
 static struct device maple_bus;
 static int subdevice_map[MAPLE_PORTS];
 static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr;
 static unsigned long maple_pnp_time;
-static int started, scanning, liststatus, fullscan;
+static int started, scanning, fullscan;
 static struct kmem_cache *maple_queue_cache;
 
 struct maple_device_specify {
@@ -129,35 +129,124 @@ static void maple_release_device(struct device *dev)
 	kfree(mdev);
 }
 
-/**
+/*
  * maple_add_packet - add a single instruction to the queue
- * @mq: instruction to add to waiting queue
+ * @mdev - maple device
+ * @function - function on device being queried
+ * @command - maple command to add
+ * @length - length of command string (in 32 bit words)
+ * @data - remainder of command string
  */
-void maple_add_packet(struct mapleq *mq)
+int maple_add_packet(struct maple_device *mdev, u32 function, u32 command,
+	size_t length, void *data)
 {
-	mutex_lock(&maple_list_lock);
-	list_add(&mq->list, &maple_waitq);
-	mutex_unlock(&maple_list_lock);
+	int locking, ret = 0;
+	void *sendbuf = NULL;
+
+	mutex_lock(&maple_wlist_lock);
+	/* bounce if device already locked */
+	locking = mutex_is_locked(&mdev->mq->mutex);
+	if (locking) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	mutex_lock(&mdev->mq->mutex);
+
+	if (length) {
+		sendbuf = kmalloc(length * 4, GFP_KERNEL);
+		if (!sendbuf) {
+			mutex_unlock(&mdev->mq->mutex);
+			ret = -ENOMEM;
+			goto out;
+		}
+		((__be32 *)sendbuf)[0] = cpu_to_be32(function);
+	}
+
+	mdev->mq->command = command;
+	mdev->mq->length = length;
+	if (length > 1)
+		memcpy(sendbuf + 4, data, (length - 1) * 4);
+	mdev->mq->sendbuf = sendbuf;
+
+	list_add(&mdev->mq->list, &maple_waitq);
+out:
+	mutex_unlock(&maple_wlist_lock);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(maple_add_packet);
 
+/*
+ * maple_add_packet_sleeps - add a single instruction to the queue
+ *  - waits for lock to be free
+ * @mdev - maple device
+ * @function - function on device being queried
+ * @command - maple command to add
+ * @length - length of command string (in 32 bit words)
+ * @data - remainder of command string
+ */
+int maple_add_packet_sleeps(struct maple_device *mdev, u32 function,
+	u32 command, size_t length, void *data)
+{
+	int locking, ret = 0;
+	void *sendbuf = NULL;
+
+	locking = mutex_lock_interruptible(&mdev->mq->mutex);
+	if (locking) {
+		ret = -EIO;
+		goto out;
+	}
+
+	if (length) {
+		sendbuf = kmalloc(length * 4, GFP_KERNEL);
+		if (!sendbuf) {
+			mutex_unlock(&mdev->mq->mutex);
+			ret = -ENOMEM;
+			goto out;
+		}
+		((__be32 *)sendbuf)[0] = cpu_to_be32(function);
+	}
+
+	mdev->mq->command = command;
+	mdev->mq->length = length;
+	if (length > 1)
+		memcpy(sendbuf + 4, data, (length - 1) * 4);
+	mdev->mq->sendbuf = sendbuf;
+
+	mutex_lock(&maple_wlist_lock);
+	list_add(&mdev->mq->list, &maple_waitq);
+	mutex_unlock(&maple_wlist_lock);
+out:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(maple_add_packet_sleeps);
+
 static struct mapleq *maple_allocq(struct maple_device *mdev)
 {
 	struct mapleq *mq;
 
 	mq = kmalloc(sizeof(*mq), GFP_KERNEL);
 	if (!mq)
-		return NULL;
+		goto failed_nomem;
 
 	mq->dev = mdev;
 	mq->recvbufdcsp = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL);
 	mq->recvbuf = (void *) P2SEGADDR(mq->recvbufdcsp);
-	if (!mq->recvbuf) {
-		kfree(mq);
-		return NULL;
-	}
+	if (!mq->recvbuf)
+		goto failed_p2;
+	/*
+	 * most devices do not need the mutex - but
+	 * anything that injects block reads or writes
+	 * will rely on it
+	 */
+	mutex_init(&mq->mutex);
 
 	return mq;
+
+failed_p2:
+	kfree(mq);
+failed_nomem:
+	return NULL;
 }
 
 static struct maple_device *maple_alloc_dev(int port, int unit)
@@ -178,7 +267,6 @@ static struct maple_device *maple_alloc_dev(int port, int unit)
 	}
 	mdev->dev.bus = &maple_bus_type;
 	mdev->dev.parent = &maple_bus;
-	mdev->function = 0;
 	return mdev;
 }
 
@@ -216,7 +304,6 @@ static void maple_build_block(struct mapleq *mq)
 	*maple_sendptr++ = PHYSADDR(mq->recvbuf);
 	*maple_sendptr++ =
 	    mq->command | (to << 8) | (from << 16) | (len << 24);
-
 	while (len-- > 0)
 		*maple_sendptr++ = *lsendbuf++;
 }
@@ -224,22 +311,27 @@ static void maple_build_block(struct mapleq *mq)
 /* build up command queue */
 static void maple_send(void)
 {
-	int i;
-	int maple_packets;
+	int i, maple_packets = 0;
 	struct mapleq *mq, *nmq;
 
 	if (!list_empty(&maple_sentq))
 		return;
-	if (list_empty(&maple_waitq) || !maple_dma_done())
+	mutex_lock(&maple_wlist_lock);
+	if (list_empty(&maple_waitq) || !maple_dma_done()) {
+		mutex_unlock(&maple_wlist_lock);
 		return;
-	maple_packets = 0;
-	maple_sendptr = maple_lastptr = maple_sendbuf;
+	}
+	mutex_unlock(&maple_wlist_lock);
+	maple_lastptr = maple_sendbuf;
+	maple_sendptr = maple_sendbuf;
+	mutex_lock(&maple_wlist_lock);
 	list_for_each_entry_safe(mq, nmq, &maple_waitq, list) {
 		maple_build_block(mq);
 		list_move(&mq->list, &maple_sentq);
 		if (maple_packets++ > MAPLE_MAXPACKETS)
 			break;
 	}
+	mutex_unlock(&maple_wlist_lock);
 	if (maple_packets > 0) {
 		for (i = 0; i < (1 << MAPLE_DMA_PAGES); i++)
 			dma_cache_sync(0, maple_sendbuf + i * PAGE_SIZE,
@@ -247,7 +339,8 @@ static void maple_send(void)
 	}
 }
 
-static int attach_matching_maple_driver(struct device_driver *driver,
+/* check if there is a driver registered likely to match this device */
+static int check_matching_maple_driver(struct device_driver *driver,
 					void *devptr)
 {
 	struct maple_driver *maple_drv;
@@ -255,12 +348,8 @@ static int attach_matching_maple_driver(struct device_driver *driver,
 
 	mdev = devptr;
 	maple_drv = to_maple_driver(driver);
-	if (mdev->devinfo.function & be32_to_cpu(maple_drv->function)) {
-		if (maple_drv->connect(mdev) == 0) {
-			mdev->driver = maple_drv;
-			return 1;
-		}
-	}
+	if (mdev->devinfo.function & cpu_to_be32(maple_drv->function))
+		return 1;
 	return 0;
 }
 
@@ -268,11 +357,6 @@ static void maple_detach_driver(struct maple_device *mdev)
 {
 	if (!mdev)
 		return;
-	if (mdev->driver) {
-		if (mdev->driver->disconnect)
-			mdev->driver->disconnect(mdev);
-	}
-	mdev->driver = NULL;
 	device_unregister(&mdev->dev);
 	mdev = NULL;
 }
@@ -328,8 +412,8 @@ static void maple_attach_driver(struct maple_device *mdev)
 			mdev->port, mdev->unit, function);
 
 		matched =
-		    bus_for_each_drv(&maple_bus_type, NULL, mdev,
-				     attach_matching_maple_driver);
+			bus_for_each_drv(&maple_bus_type, NULL, mdev,
+				check_matching_maple_driver);
 
 		if (matched == 0) {
 			/* Driver does not exist yet */
@@ -373,45 +457,48 @@ static int detach_maple_device(struct device *device, void *portptr)
 
 static int setup_maple_commands(struct device *device, void *ignored)
 {
+	int add;
 	struct maple_device *maple_dev = to_maple_dev(device);
 
 	if ((maple_dev->interval > 0)
 	    && time_after(jiffies, maple_dev->when)) {
-		maple_dev->when = jiffies + maple_dev->interval;
-		maple_dev->mq->command = MAPLE_COMMAND_GETCOND;
-		maple_dev->mq->sendbuf = &maple_dev->function;
-		maple_dev->mq->length = 1;
-		maple_add_packet(maple_dev->mq);
-		liststatus++;
+		/* bounce if we cannot lock */
+		add = maple_add_packet(maple_dev,
+			be32_to_cpu(maple_dev->devinfo.function),
+			MAPLE_COMMAND_GETCOND, 1, NULL);
+		if (!add)
+			maple_dev->when = jiffies + maple_dev->interval;
 	} else {
-		if (time_after(jiffies, maple_pnp_time)) {
-			maple_dev->mq->command = MAPLE_COMMAND_DEVINFO;
-			maple_dev->mq->length = 0;
-			maple_add_packet(maple_dev->mq);
-			liststatus++;
-		}
+		if (time_after(jiffies, maple_pnp_time))
+			/* This will also bounce */
+			maple_add_packet(maple_dev, 0,
+				MAPLE_COMMAND_DEVINFO, 0, NULL);
 	}
-
 	return 0;
 }
 
 /* VBLANK bottom half - implemented via workqueue */
 static void maple_vblank_handler(struct work_struct *work)
 {
-	if (!maple_dma_done())
-		return;
-	if (!list_empty(&maple_sentq))
+	if (!list_empty(&maple_sentq) || !maple_dma_done())
 		return;
+
 	ctrl_outl(0, MAPLE_ENABLE);
-	liststatus = 0;
+
 	bus_for_each_dev(&maple_bus_type, NULL, NULL,
 			 setup_maple_commands);
+
 	if (time_after(jiffies, maple_pnp_time))
 		maple_pnp_time = jiffies + MAPLE_PNP_INTERVAL;
-	if (liststatus && list_empty(&maple_sentq)) {
-		INIT_LIST_HEAD(&maple_sentq);
+
+	mutex_lock(&maple_wlist_lock);
+	if (!list_empty(&maple_waitq) && list_empty(&maple_sentq)) {
+		mutex_unlock(&maple_wlist_lock);
 		maple_send();
+	} else {
+		mutex_unlock(&maple_wlist_lock);
 	}
+
 	maplebus_dma_reset();
 }
 
@@ -422,8 +509,8 @@ static void maple_map_subunits(struct maple_device *mdev, int submask)
 	struct maple_device *mdev_add;
 	struct maple_device_specify ds;
 
+	ds.port = mdev->port;
 	for (k = 0; k < 5; k++) {
-		ds.port = mdev->port;
 		ds.unit = k + 1;
 		retval =
 		    bus_for_each_dev(&maple_bus_type, NULL, &ds,
@@ -437,9 +524,9 @@ static void maple_map_subunits(struct maple_device *mdev, int submask)
 			mdev_add = maple_alloc_dev(mdev->port, k + 1);
 			if (!mdev_add)
 				return;
-			mdev_add->mq->command = MAPLE_COMMAND_DEVINFO;
-			mdev_add->mq->length = 0;
-			maple_add_packet(mdev_add->mq);
+			maple_add_packet(mdev_add, 0, MAPLE_COMMAND_DEVINFO,
+				0, NULL);
+			/* mark that we are checking sub devices */
 			scanning = 1;
 		}
 		submask = submask >> 1;
@@ -505,6 +592,28 @@ static void maple_response_devinfo(struct maple_device *mdev,
 	}
 }
 
+static void maple_port_rescan(void)
+{
+	int i;
+	struct maple_device *mdev;
+
+	fullscan = 1;
+	for (i = 0; i < MAPLE_PORTS; i++) {
+		if (checked[i] == false) {
+			fullscan = 0;
+			mdev = baseunits[i];
+			/*
+			 *  test lock in case scan has failed
+			 *  but device is still locked
+			 */
+			if (mutex_is_locked(&mdev->mq->mutex))
+				mutex_unlock(&mdev->mq->mutex);
+			maple_add_packet(mdev, 0, MAPLE_COMMAND_DEVINFO,
+				0, NULL);
+		}
+	}
+}
+
 /* maple dma end bottom half - implemented via workqueue */
 static void maple_dma_handler(struct work_struct *work)
 {
@@ -512,7 +621,6 @@ static void maple_dma_handler(struct work_struct *work)
 	struct maple_device *dev;
 	char *recvbuf;
 	enum maple_code code;
-	int i;
 
 	if (!maple_dma_done())
 		return;
@@ -522,6 +630,10 @@ static void maple_dma_handler(struct work_struct *work)
 			recvbuf = mq->recvbuf;
 			code = recvbuf[0];
 			dev = mq->dev;
+			kfree(mq->sendbuf);
+			mutex_unlock(&mq->mutex);
+			list_del_init(&mq->list);
+
 			switch (code) {
 			case MAPLE_RESPONSE_NONE:
 				maple_response_none(dev, mq);
@@ -558,26 +670,16 @@ static void maple_dma_handler(struct work_struct *work)
 				break;
 			}
 		}
-		INIT_LIST_HEAD(&maple_sentq);
+		/* if scanning is 1 then we have subdevices to check */
 		if (scanning == 1) {
 			maple_send();
 			scanning = 2;
 		} else
 			scanning = 0;
-
-		if (!fullscan) {
-			fullscan = 1;
-			for (i = 0; i < MAPLE_PORTS; i++) {
-				if (checked[i] == false) {
-					fullscan = 0;
-					dev = baseunits[i];
-					dev->mq->command =
-						MAPLE_COMMAND_DEVINFO;
-					dev->mq->length = 0;
-					maple_add_packet(dev->mq);
-				}
-			}
-		}
+		/*check if we have actually tested all ports yet */
+		if (!fullscan)
+			maple_port_rescan();
+		/* mark that we have been through the first scan */
 		if (started == 0)
 			started = 1;
 	}
@@ -631,7 +733,7 @@ static int match_maple_bus_driver(struct device *devptr,
 	if (maple_dev->devinfo.function == 0xFFFFFFFF)
 		return 0;
 	else if (maple_dev->devinfo.function &
-		 be32_to_cpu(maple_drv->function))
+		 cpu_to_be32(maple_drv->function))
 		return 1;
 	return 0;
 }
@@ -713,6 +815,9 @@ static int __init maple_bus_init(void)
 	if (!maple_queue_cache)
 		goto cleanup_bothirqs;
 
+	INIT_LIST_HEAD(&maple_waitq);
+	INIT_LIST_HEAD(&maple_sentq);
+
 	/* setup maple ports */
 	for (i = 0; i < MAPLE_PORTS; i++) {
 		checked[i] = false;
@@ -723,9 +828,7 @@ static int __init maple_bus_init(void)
 				maple_free_dev(mdev[i]);
 			goto cleanup_cache;
 		}
-		mdev[i]->mq->command = MAPLE_COMMAND_DEVINFO;
-		mdev[i]->mq->length = 0;
-		maple_add_packet(mdev[i]->mq);
+		maple_add_packet(mdev[i], 0, MAPLE_COMMAND_DEVINFO, 0, NULL);
 		subdevice_map[i] = 0;
 	}
 
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 8da7535..77b44fb 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1593,7 +1593,7 @@ static int __init m66592_probe(struct platform_device *pdev)
 
 	m66592->gadget.ops = &m66592_gadget_ops;
 	device_initialize(&m66592->gadget.dev);
-	dev_set_name(&m66592->gadget, "gadget");
+	dev_set_name(&m66592->gadget.dev, "gadget");
 	m66592->gadget.is_dualspeed = 1;
 	m66592->gadget.dev.parent = &pdev->dev;
 	m66592->gadget.dev.dma_mask = pdev->dev.dma_mask;
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 0ebc1bf..a6b5529 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -118,7 +118,6 @@ obj-$(CONFIG_FB_PS3)		  += ps3fb.o
 obj-$(CONFIG_FB_SM501)            += sm501fb.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
 obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
-obj-$(CONFIG_FB_SH7343VOU)	  += sh7343_voufb.o
 obj-$(CONFIG_FB_OMAP)             += omap/
 obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
 obj-$(CONFIG_FB_CARMINE)          += carminefb.o
diff --git a/drivers/video/arkfb.c b/drivers/video/arkfb.c
index 5001bd4..38a1e83 100644
--- a/drivers/video/arkfb.c
+++ b/drivers/video/arkfb.c
@@ -1126,11 +1126,8 @@ static int ark_pci_resume (struct pci_dev* dev)
 	acquire_console_sem();
 	mutex_lock(&(par->open_lock));
 
-	if (par->ref_count == 0) {
-		mutex_unlock(&(par->open_lock));
-		release_console_sem();
-		return 0;
-	}
+	if (par->ref_count == 0)
+		goto fail;
 
 	pci_set_power_state(dev, PCI_D0);
 	pci_restore_state(dev);
@@ -1143,8 +1140,8 @@ static int ark_pci_resume (struct pci_dev* dev)
 	arkfb_set_par(info);
 	fb_set_suspend(info, 0);
 
-	mutex_unlock(&(par->open_lock));
 fail:
+	mutex_unlock(&(par->open_lock));
 	release_console_sem();
 	return 0;
 }
diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c
index fbea2bd..6fa0b9d 100644
--- a/drivers/video/backlight/hp680_bl.c
+++ b/drivers/video/backlight/hp680_bl.c
@@ -18,7 +18,7 @@
 #include <linux/fb.h>
 #include <linux/backlight.h>
 
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
 #include <asm/hp6xx.h>
 #include <asm/hd64461.h>
 
diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c
index 72d44db..738694d 100644
--- a/drivers/video/backlight/platform_lcd.c
+++ b/drivers/video/backlight/platform_lcd.c
@@ -92,7 +92,7 @@ static int __devinit platform_lcd_probe(struct platform_device *pdev)
 
 	plcd->us = dev;
 	plcd->pdata = pdata;
-	plcd->lcd = lcd_device_register("platform-lcd", dev,
+	plcd->lcd = lcd_device_register(dev_name(dev), dev,
 					plcd, &platform_lcd_ops);
 	if (IS_ERR(plcd->lcd)) {
 		dev_err(dev, "cannot register lcd device\n");
@@ -101,6 +101,8 @@ static int __devinit platform_lcd_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, plcd);
+	platform_lcd_set_power(plcd->lcd, FB_BLANK_NORMAL);
+
 	return 0;
 
  err_mem:
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index d7822af..ef7870f 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -24,6 +24,7 @@
 #include <asm/hardware.h>
 #include <asm/parisc-device.h>
 #include <asm/cacheflush.h>
+#include <asm/grfioctl.h>
 
 #include "../sticore.h"
 
@@ -725,6 +726,7 @@ static int __devinit sti_read_rom(int wordmode, struct sti_struct *sti,
 {
 	struct sti_cooked_rom *cooked;
 	struct sti_rom *raw = NULL;
+	unsigned long revno;
 
 	cooked = kmalloc(sizeof *cooked, GFP_KERNEL);
 	if (!cooked)
@@ -767,9 +769,35 @@ static int __devinit sti_read_rom(int wordmode, struct sti_struct *sti,
 	sti->graphics_id[1] = raw->graphics_id[1];
 	
 	sti_dump_rom(raw);
-	
+
+	/* check if the ROM routines in this card are compatible */
+	if (wordmode || sti->graphics_id[1] != 0x09A02587)
+		goto ok;
+
+	revno = (raw->revno[0] << 8) | raw->revno[1];
+
+	switch (sti->graphics_id[0]) {
+	case S9000_ID_HCRX:
+		/* HyperA or HyperB ? */
+		if (revno == 0x8408 || revno == 0x840b)
+			goto msg_not_supported;
+		break;
+	case CRT_ID_THUNDER:
+		if (revno == 0x8509)
+			goto msg_not_supported;
+		break;
+	case CRT_ID_THUNDER2:
+		if (revno == 0x850c)
+			goto msg_not_supported;
+	}
+ok:
 	return 1;
 
+msg_not_supported:
+	printk(KERN_ERR "Sorry, this GSC/STI card is not yet supported.\n");
+	printk(KERN_ERR "Please see http://parisc-linux.org/faq/"
+			"graphics-howto.html for more info.\n");
+	/* fall through */
 out_err:
 	kfree(raw);
 	kfree(cooked);
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 2e552d5..f89c3cc 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -87,6 +87,8 @@ static int gbe_revision;
 static int ypan, ywrap;
 
 static uint32_t pseudo_palette[16];
+static uint32_t gbe_cmap[256];
+static int gbe_turned_on; /* 0 turned off, 1 turned on */
 
 static char *mode_option __initdata = NULL;
 
@@ -208,6 +210,8 @@ void gbe_turn_off(void)
 	int i;
 	unsigned int val, x, y, vpixen_off;
 
+	gbe_turned_on = 0;
+
 	/* check if pixel counter is on */
 	val = gbe->vt_xy;
 	if (GET_GBE_FIELD(VT_XY, FREEZE, val) == 1)
@@ -371,6 +375,22 @@ static void gbe_turn_on(void)
 	}
 	if (i == 10000)
 		printk(KERN_ERR "gbefb: turn on DMA timed out\n");
+
+	gbe_turned_on = 1;
+}
+
+static void gbe_loadcmap(void)
+{
+	int i, j;
+
+	for (i = 0; i < 256; i++) {
+		for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++)
+			udelay(10);
+		if (j == 1000)
+			printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
+
+		gbe->cmap[i] = gbe_cmap[i];
+	}
 }
 
 /*
@@ -382,6 +402,7 @@ static int gbefb_blank(int blank, struct fb_info *info)
 	switch (blank) {
 	case FB_BLANK_UNBLANK:		/* unblank */
 		gbe_turn_on();
+		gbe_loadcmap();
 		break;
 
 	case FB_BLANK_NORMAL:		/* blank */
@@ -796,16 +817,10 @@ static int gbefb_set_par(struct fb_info *info)
 		gbe->gmap[i] = (i << 24) | (i << 16) | (i << 8);
 
 	/* Initialize the color map */
-	for (i = 0; i < 256; i++) {
-		int j;
-
-		for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++)
-			udelay(10);
-		if (j == 1000)
-			printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
+	for (i = 0; i < 256; i++)
+		gbe_cmap[i] = (i << 8) | (i << 16) | (i << 24);
 
-		gbe->cmap[i] = (i << 8) | (i << 16) | (i << 24);
-	}
+	gbe_loadcmap();
 
 	return 0;
 }
@@ -855,14 +870,17 @@ static int gbefb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	blue >>= 8;
 
 	if (info->var.bits_per_pixel <= 8) {
-		/* wait for the color map FIFO to have a free entry */
-		for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++)
-			udelay(10);
-		if (i == 1000) {
-			printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
-			return 1;
+		gbe_cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
+		if (gbe_turned_on) {
+			/* wait for the color map FIFO to have a free entry */
+			for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++)
+				udelay(10);
+			if (i == 1000) {
+				printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
+				return 1;
+			}
+			gbe->cmap[regno] = gbe_cmap[regno];
 		}
-		gbe->cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
 	} else if (regno < 16) {
 		switch (info->var.bits_per_pixel) {
 		case 15:
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 392a8be..e6467cf 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -27,7 +27,7 @@
 #include <asm/pgtable.h>
 #include <asm/io.h>
 #include <asm/hd64461.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
 
 #define	WIDTH 640
 
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
index 8c863a7..0a0fd48 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -58,18 +58,18 @@
 
 #ifdef CONFIG_SH_DREAMCAST
 #include <asm/machvec.h>
-#include <asm/mach/sysasic.h>
+#include <mach-dreamcast/mach/sysasic.h>
 #endif
 
 #ifdef CONFIG_SH_DMA
 #include <linux/pagemap.h>
-#include <asm/mach/dma.h>
+#include <mach/dma.h>
 #include <asm/dma.h>
 #endif
 
 #ifdef CONFIG_SH_STORE_QUEUES
 #include <linux/uaccess.h>
-#include <asm/cpu/sq.h>
+#include <cpu/sq.h>
 #endif
 
 #ifndef PCI_DEVICE_ID_NEC_NEON250
diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c
index 536ab11..4a484ee 100644
--- a/drivers/video/vt8623fb.c
+++ b/drivers/video/vt8623fb.c
@@ -853,11 +853,8 @@ static int vt8623_pci_resume(struct pci_dev* dev)
 	acquire_console_sem();
 	mutex_lock(&(par->open_lock));
 
-	if (par->ref_count == 0) {
-		mutex_unlock(&(par->open_lock));
-		release_console_sem();
-		return 0;
-	}
+	if (par->ref_count == 0)
+		goto fail;
 
 	pci_set_power_state(dev, PCI_D0);
 	pci_restore_state(dev);
@@ -870,8 +867,8 @@ static int vt8623_pci_resume(struct pci_dev* dev)
 	vt8623fb_set_par(info);
 	fb_set_suspend(info, 0);
 
-	mutex_unlock(&(par->open_lock));
 fail:
+	mutex_unlock(&(par->open_lock));
 	release_console_sem();
 
 	return 0;
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index eaa3f2a..ccd6c53 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -420,7 +420,7 @@ static int __devinit detect_cru_service(void)
 static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
 			    void *data)
 {
-	static unsigned long rom_pl;
+	unsigned long rom_pl;
 	static int die_nmi_called;
 
 	if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
diff --git a/fs/buffer.c b/fs/buffer.c
index ca12a6b..4dbe529 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -580,7 +580,7 @@ EXPORT_SYMBOL(mark_buffer_async_write);
 /*
  * The buffer's backing address_space's private_lock must be held
  */
-static inline void __remove_assoc_queue(struct buffer_head *bh)
+static void __remove_assoc_queue(struct buffer_head *bh)
 {
 	list_del_init(&bh->b_assoc_buffers);
 	WARN_ON(!bh->b_assoc_map);
diff --git a/fs/libfs.c b/fs/libfs.c
index baeb71e..1add676 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -216,8 +216,8 @@ int get_sb_pseudo(struct file_system_type *fs_type, char *name,
 
 	s->s_flags = MS_NOUSER;
 	s->s_maxbytes = ~0ULL;
-	s->s_blocksize = 1024;
-	s->s_blocksize_bits = 10;
+	s->s_blocksize = PAGE_SIZE;
+	s->s_blocksize_bits = PAGE_SHIFT;
 	s->s_magic = magic;
 	s->s_op = ops ? ops : &simple_super_operations;
 	s->s_time_gran = 1;
diff --git a/fs/omfs/bitmap.c b/fs/omfs/bitmap.c
index dc75f22..697663b 100644
--- a/fs/omfs/bitmap.c
+++ b/fs/omfs/bitmap.c
@@ -71,10 +71,10 @@ static int set_run(struct super_block *sb, int map,
 		}
 		if (set) {
 			set_bit(bit, sbi->s_imap[map]);
-			set_bit(bit, (long *) bh->b_data);
+			set_bit(bit, (unsigned long *)bh->b_data);
 		} else {
 			clear_bit(bit, sbi->s_imap[map]);
-			clear_bit(bit, (long *) bh->b_data);
+			clear_bit(bit, (unsigned long *)bh->b_data);
 		}
 	}
 	mark_buffer_dirty(bh);
@@ -109,7 +109,7 @@ int omfs_allocate_block(struct super_block *sb, u64 block)
 		if (!bh)
 			goto out;
 
-		set_bit(bit, (long *) bh->b_data);
+		set_bit(bit, (unsigned long *)bh->b_data);
 		mark_buffer_dirty(bh);
 		brelse(bh);
 	}
diff --git a/fs/omfs/dir.c b/fs/omfs/dir.c
index 05a5bc3..c0757e9 100644
--- a/fs/omfs/dir.c
+++ b/fs/omfs/dir.c
@@ -104,7 +104,7 @@ int omfs_make_empty(struct inode *inode, struct super_block *sb)
 
 	oi = (struct omfs_inode *) bh->b_data;
 	oi->i_head.h_self = cpu_to_be64(inode->i_ino);
-	oi->i_sibling = ~0ULL;
+	oi->i_sibling = ~cpu_to_be64(0ULL);
 
 	mark_buffer_dirty(bh);
 	brelse(bh);
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
index 66e01fa..7e24990 100644
--- a/fs/omfs/file.c
+++ b/fs/omfs/file.c
@@ -30,11 +30,11 @@ void omfs_make_empty_table(struct buffer_head *bh, int offset)
 {
 	struct omfs_extent *oe = (struct omfs_extent *) &bh->b_data[offset];
 
-	oe->e_next = ~0ULL;
+	oe->e_next = ~cpu_to_be64(0ULL);
 	oe->e_extent_count = cpu_to_be32(1),
 	oe->e_fill = cpu_to_be32(0x22),
-	oe->e_entry.e_cluster = ~0ULL;
-	oe->e_entry.e_blocks = ~0ULL;
+	oe->e_entry.e_cluster = ~cpu_to_be64(0ULL);
+	oe->e_entry.e_blocks = ~cpu_to_be64(0ULL);
 }
 
 int omfs_shrink_inode(struct inode *inode)
diff --git a/fs/romfs/inode.c b/fs/romfs/inode.c
index 8e51a2a..60d2f82 100644
--- a/fs/romfs/inode.c
+++ b/fs/romfs/inode.c
@@ -418,7 +418,8 @@ static int
 romfs_readpage(struct file *file, struct page * page)
 {
 	struct inode *inode = page->mapping->host;
-	loff_t offset, avail, readlen;
+	loff_t offset, size;
+	unsigned long filled;
 	void *buf;
 	int result = -EIO;
 
@@ -430,21 +431,29 @@ romfs_readpage(struct file *file, struct page * page)
 
 	/* 32 bit warning -- but not for us :) */
 	offset = page_offset(page);
-	if (offset < i_size_read(inode)) {
-		avail = inode->i_size-offset;
-		readlen = min_t(unsigned long, avail, PAGE_SIZE);
-		if (romfs_copyfrom(inode, buf, ROMFS_I(inode)->i_dataoffset+offset, readlen) == readlen) {
-			if (readlen < PAGE_SIZE) {
-				memset(buf + readlen,0,PAGE_SIZE-readlen);
-			}
-			SetPageUptodate(page);
-			result = 0;
+	size = i_size_read(inode);
+	filled = 0;
+	result = 0;
+	if (offset < size) {
+		unsigned long readlen;
+
+		size -= offset;
+		readlen = size > PAGE_SIZE ? PAGE_SIZE : size;
+
+		filled = romfs_copyfrom(inode, buf, ROMFS_I(inode)->i_dataoffset+offset, readlen);
+
+		if (filled != readlen) {
+			SetPageError(page);
+			filled = 0;
+			result = -EIO;
 		}
 	}
-	if (result) {
-		memset(buf, 0, PAGE_SIZE);
-		SetPageError(page);
-	}
+
+	if (filled < PAGE_SIZE)
+		memset(buf + filled, 0, PAGE_SIZE-filled);
+
+	if (!result)
+		SetPageUptodate(page);
 	flush_dcache_page(page);
 
 	unlock_page(page);
diff --git a/include/asm-ia64/sn/mspec.h b/include/asm-ia64/sn/mspec.h
index dbe13c6..c1d3c50 100644
--- a/include/asm-ia64/sn/mspec.h
+++ b/include/asm-ia64/sn/mspec.h
@@ -4,7 +4,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2001-2004 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (c) 2001-2008 Silicon Graphics, Inc.  All rights reserved.
  */
 
 #ifndef _ASM_IA64_SN_MSPEC_H
@@ -32,26 +32,26 @@
 #ifdef __KERNEL__
 
 /*
- * Each Atomic Memory Operation (AMO formerly known as fetchop)
+ * Each Atomic Memory Operation (amo, formerly known as fetchop)
  * variable is 64 bytes long.  The first 8 bytes are used.  The
  * remaining 56 bytes are unaddressable due to the operation taking
  * that portion of the address.
  *
- * NOTE: The AMO_t _MUST_ be placed in either the first or second half
- * of the cache line.  The cache line _MUST NOT_ be used for anything
- * other than additional AMO_t entries.  This is because there are two
+ * NOTE: The amo structure _MUST_ be placed in either the first or second
+ * half of the cache line.  The cache line _MUST NOT_ be used for anything
+ * other than additional amo entries.  This is because there are two
  * addresses which reference the same physical cache line.  One will
  * be a cached entry with the memory type bits all set.  This address
- * may be loaded into processor cache.  The AMO_t will be referenced
+ * may be loaded into processor cache.  The amo will be referenced
  * uncached via the memory special memory type.  If any portion of the
  * cached cache-line is modified, when that line is flushed, it will
  * overwrite the uncached value in physical memory and lead to
  * inconsistency.
  */
-typedef struct {
+struct amo {
         u64 variable;
         u64 unused[7];
-} AMO_t;
+};
 
 
 #endif /* __KERNEL__ */
diff --git a/include/asm-mips/gdb-stub.h b/include/asm-mips/gdb-stub.h
deleted file mode 100644
index 22f67d4..0000000
--- a/include/asm-mips/gdb-stub.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995 Andreas Busse
- * Copyright (C) 2003 Ralf Baechle
- */
-#ifndef _ASM_GDB_STUB_H
-#define _ASM_GDB_STUB_H
-
-
-/*
- * important register numbers
- */
-
-#define REG_EPC			37
-#define REG_FP			72
-#define REG_SP			29
-
-/*
- * Stack layout for the GDB exception handler
- * Derived from the stack layout described in asm-mips/stackframe.h
- *
- * The first PTRSIZE*6 bytes are argument save space for C subroutines.
- */
-#define NUMREGS			90
-
-#define GDB_FR_REG0		(PTRSIZE*6)			/* 0 */
-#define GDB_FR_REG1		((GDB_FR_REG0) + LONGSIZE)	/* 1 */
-#define GDB_FR_REG2		((GDB_FR_REG1) + LONGSIZE)	/* 2 */
-#define GDB_FR_REG3		((GDB_FR_REG2) + LONGSIZE)	/* 3 */
-#define GDB_FR_REG4		((GDB_FR_REG3) + LONGSIZE)	/* 4 */
-#define GDB_FR_REG5		((GDB_FR_REG4) + LONGSIZE)	/* 5 */
-#define GDB_FR_REG6		((GDB_FR_REG5) + LONGSIZE)	/* 6 */
-#define GDB_FR_REG7		((GDB_FR_REG6) + LONGSIZE)	/* 7 */
-#define GDB_FR_REG8		((GDB_FR_REG7) + LONGSIZE)	/* 8 */
-#define GDB_FR_REG9	        ((GDB_FR_REG8) + LONGSIZE)	/* 9 */
-#define GDB_FR_REG10		((GDB_FR_REG9) + LONGSIZE)	/* 10 */
-#define GDB_FR_REG11		((GDB_FR_REG10) + LONGSIZE)	/* 11 */
-#define GDB_FR_REG12		((GDB_FR_REG11) + LONGSIZE)	/* 12 */
-#define GDB_FR_REG13		((GDB_FR_REG12) + LONGSIZE)	/* 13 */
-#define GDB_FR_REG14		((GDB_FR_REG13) + LONGSIZE)	/* 14 */
-#define GDB_FR_REG15		((GDB_FR_REG14) + LONGSIZE)	/* 15 */
-#define GDB_FR_REG16		((GDB_FR_REG15) + LONGSIZE)	/* 16 */
-#define GDB_FR_REG17		((GDB_FR_REG16) + LONGSIZE)	/* 17 */
-#define GDB_FR_REG18		((GDB_FR_REG17) + LONGSIZE)	/* 18 */
-#define GDB_FR_REG19		((GDB_FR_REG18) + LONGSIZE)	/* 19 */
-#define GDB_FR_REG20		((GDB_FR_REG19) + LONGSIZE)	/* 20 */
-#define GDB_FR_REG21		((GDB_FR_REG20) + LONGSIZE)	/* 21 */
-#define GDB_FR_REG22		((GDB_FR_REG21) + LONGSIZE)	/* 22 */
-#define GDB_FR_REG23		((GDB_FR_REG22) + LONGSIZE)	/* 23 */
-#define GDB_FR_REG24		((GDB_FR_REG23) + LONGSIZE)	/* 24 */
-#define GDB_FR_REG25		((GDB_FR_REG24) + LONGSIZE)	/* 25 */
-#define GDB_FR_REG26		((GDB_FR_REG25) + LONGSIZE)	/* 26 */
-#define GDB_FR_REG27		((GDB_FR_REG26) + LONGSIZE)	/* 27 */
-#define GDB_FR_REG28		((GDB_FR_REG27) + LONGSIZE)	/* 28 */
-#define GDB_FR_REG29		((GDB_FR_REG28) + LONGSIZE)	/* 29 */
-#define GDB_FR_REG30		((GDB_FR_REG29) + LONGSIZE)	/* 30 */
-#define GDB_FR_REG31		((GDB_FR_REG30) + LONGSIZE)	/* 31 */
-
-/*
- * Saved special registers
- */
-#define GDB_FR_STATUS		((GDB_FR_REG31) + LONGSIZE)	/* 32 */
-#define GDB_FR_LO		((GDB_FR_STATUS) + LONGSIZE)	/* 33 */
-#define GDB_FR_HI		((GDB_FR_LO) + LONGSIZE)	/* 34 */
-#define GDB_FR_BADVADDR		((GDB_FR_HI) + LONGSIZE)	/* 35 */
-#define GDB_FR_CAUSE		((GDB_FR_BADVADDR) + LONGSIZE)	/* 36 */
-#define GDB_FR_EPC		((GDB_FR_CAUSE) + LONGSIZE)	/* 37 */
-
-/*
- * Saved floating point registers
- */
-#define GDB_FR_FPR0		((GDB_FR_EPC) + LONGSIZE)	/* 38 */
-#define GDB_FR_FPR1		((GDB_FR_FPR0) + LONGSIZE)	/* 39 */
-#define GDB_FR_FPR2		((GDB_FR_FPR1) + LONGSIZE)	/* 40 */
-#define GDB_FR_FPR3		((GDB_FR_FPR2) + LONGSIZE)	/* 41 */
-#define GDB_FR_FPR4		((GDB_FR_FPR3) + LONGSIZE)	/* 42 */
-#define GDB_FR_FPR5		((GDB_FR_FPR4) + LONGSIZE)	/* 43 */
-#define GDB_FR_FPR6		((GDB_FR_FPR5) + LONGSIZE)	/* 44 */
-#define GDB_FR_FPR7		((GDB_FR_FPR6) + LONGSIZE)	/* 45 */
-#define GDB_FR_FPR8		((GDB_FR_FPR7) + LONGSIZE)	/* 46 */
-#define GDB_FR_FPR9		((GDB_FR_FPR8) + LONGSIZE)	/* 47 */
-#define GDB_FR_FPR10		((GDB_FR_FPR9) + LONGSIZE)	/* 48 */
-#define GDB_FR_FPR11		((GDB_FR_FPR10) + LONGSIZE)	/* 49 */
-#define GDB_FR_FPR12		((GDB_FR_FPR11) + LONGSIZE)	/* 50 */
-#define GDB_FR_FPR13		((GDB_FR_FPR12) + LONGSIZE)	/* 51 */
-#define GDB_FR_FPR14		((GDB_FR_FPR13) + LONGSIZE)	/* 52 */
-#define GDB_FR_FPR15		((GDB_FR_FPR14) + LONGSIZE)	/* 53 */
-#define GDB_FR_FPR16		((GDB_FR_FPR15) + LONGSIZE)	/* 54 */
-#define GDB_FR_FPR17		((GDB_FR_FPR16) + LONGSIZE)	/* 55 */
-#define GDB_FR_FPR18		((GDB_FR_FPR17) + LONGSIZE)	/* 56 */
-#define GDB_FR_FPR19		((GDB_FR_FPR18) + LONGSIZE)	/* 57 */
-#define GDB_FR_FPR20		((GDB_FR_FPR19) + LONGSIZE)	/* 58 */
-#define GDB_FR_FPR21		((GDB_FR_FPR20) + LONGSIZE)	/* 59 */
-#define GDB_FR_FPR22		((GDB_FR_FPR21) + LONGSIZE)	/* 60 */
-#define GDB_FR_FPR23		((GDB_FR_FPR22) + LONGSIZE)	/* 61 */
-#define GDB_FR_FPR24		((GDB_FR_FPR23) + LONGSIZE)	/* 62 */
-#define GDB_FR_FPR25		((GDB_FR_FPR24) + LONGSIZE)	/* 63 */
-#define GDB_FR_FPR26		((GDB_FR_FPR25) + LONGSIZE)	/* 64 */
-#define GDB_FR_FPR27		((GDB_FR_FPR26) + LONGSIZE)	/* 65 */
-#define GDB_FR_FPR28		((GDB_FR_FPR27) + LONGSIZE)	/* 66 */
-#define GDB_FR_FPR29		((GDB_FR_FPR28) + LONGSIZE)	/* 67 */
-#define GDB_FR_FPR30		((GDB_FR_FPR29) + LONGSIZE)	/* 68 */
-#define GDB_FR_FPR31		((GDB_FR_FPR30) + LONGSIZE)	/* 69 */
-
-#define GDB_FR_FSR		((GDB_FR_FPR31) + LONGSIZE)	/* 70 */
-#define GDB_FR_FIR		((GDB_FR_FSR) + LONGSIZE)	/* 71 */
-#define GDB_FR_FRP		((GDB_FR_FIR) + LONGSIZE)	/* 72 */
-
-#define GDB_FR_DUMMY		((GDB_FR_FRP) + LONGSIZE)	/* 73, unused ??? */
-
-/*
- * Again, CP0 registers
- */
-#define GDB_FR_CP0_INDEX	((GDB_FR_DUMMY) + LONGSIZE)	/* 74 */
-#define GDB_FR_CP0_RANDOM	((GDB_FR_CP0_INDEX) + LONGSIZE)	/* 75 */
-#define GDB_FR_CP0_ENTRYLO0	((GDB_FR_CP0_RANDOM) + LONGSIZE)/* 76 */
-#define GDB_FR_CP0_ENTRYLO1	((GDB_FR_CP0_ENTRYLO0) + LONGSIZE)/* 77 */
-#define GDB_FR_CP0_CONTEXT	((GDB_FR_CP0_ENTRYLO1) + LONGSIZE)/* 78 */
-#define GDB_FR_CP0_PAGEMASK	((GDB_FR_CP0_CONTEXT) + LONGSIZE)/* 79 */
-#define GDB_FR_CP0_WIRED	((GDB_FR_CP0_PAGEMASK) + LONGSIZE)/* 80 */
-#define GDB_FR_CP0_REG7		((GDB_FR_CP0_WIRED) + LONGSIZE)	/* 81 */
-#define GDB_FR_CP0_REG8		((GDB_FR_CP0_REG7) + LONGSIZE)	/* 82 */
-#define GDB_FR_CP0_REG9		((GDB_FR_CP0_REG8) + LONGSIZE)	/* 83 */
-#define GDB_FR_CP0_ENTRYHI	((GDB_FR_CP0_REG9) + LONGSIZE)	/* 84 */
-#define GDB_FR_CP0_REG11	((GDB_FR_CP0_ENTRYHI) + LONGSIZE)/* 85 */
-#define GDB_FR_CP0_REG12	((GDB_FR_CP0_REG11) + LONGSIZE)	/* 86 */
-#define GDB_FR_CP0_REG13	((GDB_FR_CP0_REG12) + LONGSIZE)	/* 87 */
-#define GDB_FR_CP0_REG14	((GDB_FR_CP0_REG13) + LONGSIZE)	/* 88 */
-#define GDB_FR_CP0_PRID		((GDB_FR_CP0_REG14) + LONGSIZE)	/* 89 */
-
-#define GDB_FR_SIZE		((((GDB_FR_CP0_PRID) + LONGSIZE) + (PTRSIZE-1)) & ~(PTRSIZE-1))
-
-#ifndef __ASSEMBLY__
-
-/*
- * This is the same as above, but for the high-level
- * part of the GDB stub.
- */
-
-struct gdb_regs {
-	/*
-	 * Pad bytes for argument save space on the stack
-	 * 24/48 Bytes for 32/64 bit code
-	 */
-	unsigned long pad0[6];
-
-	/*
-	 * saved main processor registers
-	 */
-	long	 reg0,  reg1,  reg2,  reg3,  reg4,  reg5,  reg6,  reg7;
-	long	 reg8,  reg9, reg10, reg11, reg12, reg13, reg14, reg15;
-	long	reg16, reg17, reg18, reg19, reg20, reg21, reg22, reg23;
-	long	reg24, reg25, reg26, reg27, reg28, reg29, reg30, reg31;
-
-	/*
-	 * Saved special registers
-	 */
-	long	cp0_status;
-	long	lo;
-	long	hi;
-	long	cp0_badvaddr;
-	long	cp0_cause;
-	long	cp0_epc;
-
-	/*
-	 * Saved floating point registers
-	 */
-	long	fpr0,  fpr1,  fpr2,  fpr3,  fpr4,  fpr5,  fpr6,  fpr7;
-	long	fpr8,  fpr9,  fpr10, fpr11, fpr12, fpr13, fpr14, fpr15;
-	long	fpr16, fpr17, fpr18, fpr19, fpr20, fpr21, fpr22, fpr23;
-	long	fpr24, fpr25, fpr26, fpr27, fpr28, fpr29, fpr30, fpr31;
-
-	long	cp1_fsr;
-	long	cp1_fir;
-
-	/*
-	 * Frame pointer
-	 */
-	long	frame_ptr;
-	long    dummy;		/* unused */
-
-	/*
-	 * saved cp0 registers
-	 */
-	long	cp0_index;
-	long	cp0_random;
-	long	cp0_entrylo0;
-	long	cp0_entrylo1;
-	long	cp0_context;
-	long	cp0_pagemask;
-	long	cp0_wired;
-	long	cp0_reg7;
-	long	cp0_reg8;
-	long	cp0_reg9;
-	long	cp0_entryhi;
-	long	cp0_reg11;
-	long	cp0_reg12;
-	long	cp0_reg13;
-	long	cp0_reg14;
-	long	cp0_prid;
-};
-
-/*
- * Prototypes
- */
-
-extern int kgdb_enabled;
-void set_debug_traps(void);
-void set_async_breakpoint(unsigned long *epc);
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_GDB_STUB_H */
diff --git a/include/asm-mips/kdebug.h b/include/asm-mips/kdebug.h
index 6ece1b0..5bf62aa 100644
--- a/include/asm-mips/kdebug.h
+++ b/include/asm-mips/kdebug.h
@@ -1 +1,13 @@
-#include <asm-generic/kdebug.h>
+#ifndef _ASM_MIPS_KDEBUG_H
+#define _ASM_MIPS_KDEBUG_H
+
+#include <linux/notifier.h>
+
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_FP,
+	DIE_TRAP,
+	DIE_RI,
+};
+
+#endif /* _ASM_MIPS_KDEBUG_H */
diff --git a/include/asm-mips/kgdb.h b/include/asm-mips/kgdb.h
new file mode 100644
index 0000000..48223b0
--- /dev/null
+++ b/include/asm-mips/kgdb.h
@@ -0,0 +1,44 @@
+#ifndef __ASM_KGDB_H_
+#define __ASM_KGDB_H_
+
+#ifdef __KERNEL__
+
+#include <asm/sgidefs.h>
+
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \
+	(_MIPS_ISA == _MIPS_ISA_MIPS32)
+
+#define KGDB_GDB_REG_SIZE 32
+
+#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \
+	(_MIPS_ISA == _MIPS_ISA_MIPS64)
+
+#ifdef CONFIG_32BIT
+#define KGDB_GDB_REG_SIZE 32
+#else /* CONFIG_CPU_32BIT */
+#define KGDB_GDB_REG_SIZE 64
+#endif
+#else
+#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA"
+#endif /* _MIPS_ISA */
+
+#define BUFMAX			2048
+#if (KGDB_GDB_REG_SIZE == 32)
+#define NUMREGBYTES		(90*sizeof(u32))
+#define NUMCRITREGBYTES		(12*sizeof(u32))
+#else
+#define NUMREGBYTES		(90*sizeof(u64))
+#define NUMCRITREGBYTES		(12*sizeof(u64))
+#endif
+#define BREAK_INSTR_SIZE	4
+#define CACHE_FLUSH_IS_SAFE	0
+
+extern void arch_kgdb_breakpoint(void);
+extern int kgdb_early_setup;
+extern void *saved_vectors[32];
+extern void handle_exception(struct pt_regs *regs);
+extern void breakinst(void);
+
+#endif				/* __KERNEL__ */
+
+#endif /* __ASM_KGDB_H_ */
diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h
index c205875..5510c53 100644
--- a/include/asm-mips/pci.h
+++ b/include/asm-mips/pci.h
@@ -174,4 +174,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 
 extern int pci_probe_only;
 
+extern char * (*pcibios_plat_setup)(char *str);
+
 #endif /* _ASM_PCI_H */
diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h
index cbae37e..5b1ccf9 100644
--- a/include/asm-mips/txx9/generic.h
+++ b/include/asm-mips/txx9/generic.h
@@ -44,5 +44,19 @@ extern struct txx9_board_vec *txx9_board_vec;
 extern int (*txx9_irq_dispatch)(int pending);
 void prom_init_cmdline(void);
 char *prom_getcmdline(void);
+void txx9_wdt_init(unsigned long base);
+void txx9_spi_init(int busid, unsigned long base, int irq);
+void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr);
+void txx9_sio_init(unsigned long baseaddr, int irq,
+		   unsigned int line, unsigned int sclk, int nocts);
+void prom_putchar(char c);
+#ifdef CONFIG_EARLY_PRINTK
+extern void (*txx9_prom_putchar)(char c);
+void txx9_sio_putchar_init(unsigned long baseaddr);
+#else
+static inline void txx9_sio_putchar_init(unsigned long baseaddr)
+{
+}
+#endif
 
 #endif /* __ASM_TXX9_GENERIC_H */
diff --git a/include/asm-mips/txx9/jmr3927.h b/include/asm-mips/txx9/jmr3927.h
index d6eb1b6..a409c44 100644
--- a/include/asm-mips/txx9/jmr3927.h
+++ b/include/asm-mips/txx9/jmr3927.h
@@ -149,8 +149,6 @@
 
 /* Clocks */
 #define JMR3927_CORECLK	132710400	/* 132.7MHz */
-#define JMR3927_GBUSCLK	(JMR3927_CORECLK / 2)	/* 66.35MHz */
-#define JMR3927_IMCLK	(JMR3927_CORECLK / 4)	/* 33.17MHz */
 
 /*
  * TX3927 Pin Configuration:
diff --git a/include/asm-mips/txx9/pci.h b/include/asm-mips/txx9/pci.h
index d89a450..3d32529 100644
--- a/include/asm-mips/txx9/pci.h
+++ b/include/asm-mips/txx9/pci.h
@@ -33,4 +33,7 @@ enum txx9_pci_err_action {
 };
 extern enum txx9_pci_err_action txx9_pci_err_action;
 
+extern char * (*txx9_board_pcibios_setup)(char *str);
+char *txx9_pcibios_setup(char *str);
+
 #endif /* __ASM_TXX9_PCI_H */
diff --git a/include/asm-mips/txx9/smsc_fdc37m81x.h b/include/asm-mips/txx9/smsc_fdc37m81x.h
index 9375e4f..02e161d0 100644
--- a/include/asm-mips/txx9/smsc_fdc37m81x.h
+++ b/include/asm-mips/txx9/smsc_fdc37m81x.h
@@ -56,7 +56,7 @@
 #define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
 #define SMSC_FDC37M81X_CHIP_ID       0x4d
 
-unsigned long __init smsc_fdc37m81x_init(unsigned long port);
+unsigned long smsc_fdc37m81x_init(unsigned long port);
 
 void smsc_fdc37m81x_config_beg(void);
 
diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h
index ea79e1b..587deb9 100644
--- a/include/asm-mips/txx9/tx3927.h
+++ b/include/asm-mips/txx9/tx3927.h
@@ -8,9 +8,8 @@
 #ifndef __ASM_TXX9_TX3927_H
 #define __ASM_TXX9_TX3927_H
 
-#include <asm/txx9/txx927.h>
-
 #define TX3927_REG_BASE	0xfffe0000UL
+#define TX3927_REG_SIZE	0x00010000
 #define TX3927_SDRAMC_REG	(TX3927_REG_BASE + 0x8000)
 #define TX3927_ROMC_REG		(TX3927_REG_BASE + 0x9000)
 #define TX3927_DMA_REG		(TX3927_REG_BASE + 0xb000)
@@ -236,11 +235,17 @@ struct tx3927_ccfg_reg {
 /* see PCI_STATUS_XXX in linux/pci.h */
 #define PCI_STATUS_NEW_CAP	0x0010
 
+/* bits for ISTAT/IIM */
+#define TX3927_PCIC_IIM_ALL	0x00001600
+
 /* bits for TC */
 #define TX3927_PCIC_TC_OF16E	0x00000020
 #define TX3927_PCIC_TC_IF8E	0x00000010
 #define TX3927_PCIC_TC_OF8E	0x00000008
 
+/* bits for TSTAT/TIM */
+#define TX3927_PCIC_TIM_ALL	0x0003ffff
+
 /* bits for IOBA/MBA */
 /* see PCI_BASE_ADDRESS_XXX in linux/pci.h */
 
@@ -313,12 +318,22 @@ struct tx3927_ccfg_reg {
 #define tx3927_dmaptr		((struct tx3927_dma_reg *)TX3927_DMA_REG)
 #define tx3927_pcicptr		((struct tx3927_pcic_reg *)TX3927_PCIC_REG)
 #define tx3927_ccfgptr		((struct tx3927_ccfg_reg *)TX3927_CCFG_REG)
-#define tx3927_tmrptr(ch)	((struct txx927_tmr_reg *)TX3927_TMR_REG(ch))
 #define tx3927_sioptr(ch)	((struct txx927_sio_reg *)TX3927_SIO_REG(ch))
 #define tx3927_pioptr		((struct txx9_pio_reg __iomem *)TX3927_PIO_REG)
 
+#define TX3927_REV_PCODE()	(tx3927_ccfgptr->crir >> 16)
+#define TX3927_ROMC_BA(ch)	(tx3927_romcptr->cr[(ch)] & 0xfff00000)
+#define TX3927_ROMC_SIZE(ch)	\
+	(0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf))
+
+void tx3927_wdt_init(void);
+void tx3927_setup(void);
+void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr);
+void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask);
 struct pci_controller;
-void __init tx3927_pcic_setup(struct pci_controller *channel,
-			      unsigned long sdram_size, int extarb);
+void tx3927_pcic_setup(struct pci_controller *channel,
+		       unsigned long sdram_size, int extarb);
+void tx3927_setup_pcierr_irq(void);
+void tx3927_irq_init(void);
 
 #endif /* __ASM_TXX9_TX3927_H */
diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h
index ceb4b79..195f651 100644
--- a/include/asm-mips/txx9/tx4927.h
+++ b/include/asm-mips/txx9/tx4927.h
@@ -243,12 +243,13 @@ static inline void tx4927_ccfg_change(__u64 change, __u64 new)
 }
 
 unsigned int tx4927_get_mem_size(void);
-void tx4927_wdr_init(void);
+void tx4927_wdt_init(void);
 void tx4927_setup(void);
 void tx4927_time_init(unsigned int tmrnr);
-void tx4927_setup_serial(void);
+void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask);
 int tx4927_report_pciclk(void);
 int tx4927_pciclk66_setup(void);
+void tx4927_setup_pcierr_irq(void);
 void tx4927_irq_init(void);
 
 #endif /* __ASM_TXX9_TX4927_H */
diff --git a/include/asm-mips/txx9/tx4927pcic.h b/include/asm-mips/txx9/tx4927pcic.h
index d61c3d0..c470b8a 100644
--- a/include/asm-mips/txx9/tx4927pcic.h
+++ b/include/asm-mips/txx9/tx4927pcic.h
@@ -10,6 +10,7 @@
 #define __ASM_TXX9_TX4927PCIC_H
 
 #include <linux/pci.h>
+#include <linux/irqreturn.h>
 
 struct tx4927_pcic_reg {
 	u32 pciid;
@@ -192,8 +193,11 @@ struct tx4927_pcic_reg {
 
 struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
 	struct pci_controller *channel);
-void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
-			      struct pci_controller *channel, int extarb);
+void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
+		       struct pci_controller *channel, int extarb);
 void tx4927_report_pcic_status(void);
+char *tx4927_pcibios_setup(char *str);
+void tx4927_dump_pcic_settings(void);
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id);
 
 #endif /* __ASM_TXX9_TX4927PCIC_H */
diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h
index 1ed969d..8175d4c 100644
--- a/include/asm-mips/txx9/tx4938.h
+++ b/include/asm-mips/txx9/tx4938.h
@@ -276,15 +276,18 @@ struct tx4938_ccfg_reg {
 #define TX4938_EBUSC_SIZE(ch)	TX4927_EBUSC_SIZE(ch)
 
 #define tx4938_get_mem_size() tx4927_get_mem_size()
-void tx4938_wdr_init(void);
+void tx4938_wdt_init(void);
 void tx4938_setup(void);
 void tx4938_time_init(unsigned int tmrnr);
-void tx4938_setup_serial(void);
+void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask);
+void tx4938_spi_init(int busid);
+void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1);
 int tx4938_report_pciclk(void);
 void tx4938_report_pci1clk(void);
 int tx4938_pciclk66_setup(void);
 struct pci_dev;
 int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
+void tx4938_setup_pcierr_irq(void);
 void tx4938_irq_init(void);
 
 #endif
diff --git a/include/asm-mips/txx9/txx927.h b/include/asm-mips/txx9/txx927.h
deleted file mode 100644
index 97dd7ad..0000000
--- a/include/asm-mips/txx9/txx927.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Common definitions for TX3927/TX4927
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000 Toshiba Corporation
- */
-#ifndef __ASM_TXX9_TXX927_H
-#define __ASM_TXX9_TXX927_H
-
-struct txx927_sio_reg {
-	volatile unsigned long lcr;
-	volatile unsigned long dicr;
-	volatile unsigned long disr;
-	volatile unsigned long cisr;
-	volatile unsigned long fcr;
-	volatile unsigned long flcr;
-	volatile unsigned long bgr;
-	volatile unsigned long tfifo;
-	volatile unsigned long rfifo;
-};
-
-/*
- * SIO
- */
-/* SILCR : Line Control */
-#define TXx927_SILCR_SCS_MASK	0x00000060
-#define TXx927_SILCR_SCS_IMCLK	0x00000000
-#define TXx927_SILCR_SCS_IMCLK_BG	0x00000020
-#define TXx927_SILCR_SCS_SCLK	0x00000040
-#define TXx927_SILCR_SCS_SCLK_BG	0x00000060
-#define TXx927_SILCR_UEPS	0x00000010
-#define TXx927_SILCR_UPEN	0x00000008
-#define TXx927_SILCR_USBL_MASK	0x00000004
-#define TXx927_SILCR_USBL_1BIT	0x00000004
-#define TXx927_SILCR_USBL_2BIT	0x00000000
-#define TXx927_SILCR_UMODE_MASK	0x00000003
-#define TXx927_SILCR_UMODE_8BIT	0x00000000
-#define TXx927_SILCR_UMODE_7BIT	0x00000001
-
-/* SIDICR : DMA/Int. Control */
-#define TXx927_SIDICR_TDE	0x00008000
-#define TXx927_SIDICR_RDE	0x00004000
-#define TXx927_SIDICR_TIE	0x00002000
-#define TXx927_SIDICR_RIE	0x00001000
-#define TXx927_SIDICR_SPIE	0x00000800
-#define TXx927_SIDICR_CTSAC	0x00000600
-#define TXx927_SIDICR_STIE_MASK	0x0000003f
-#define TXx927_SIDICR_STIE_OERS		0x00000020
-#define TXx927_SIDICR_STIE_CTSS		0x00000010
-#define TXx927_SIDICR_STIE_RBRKD	0x00000008
-#define TXx927_SIDICR_STIE_TRDY		0x00000004
-#define TXx927_SIDICR_STIE_TXALS	0x00000002
-#define TXx927_SIDICR_STIE_UBRKD	0x00000001
-
-/* SIDISR : DMA/Int. Status */
-#define TXx927_SIDISR_UBRK	0x00008000
-#define TXx927_SIDISR_UVALID	0x00004000
-#define TXx927_SIDISR_UFER	0x00002000
-#define TXx927_SIDISR_UPER	0x00001000
-#define TXx927_SIDISR_UOER	0x00000800
-#define TXx927_SIDISR_ERI	0x00000400
-#define TXx927_SIDISR_TOUT	0x00000200
-#define TXx927_SIDISR_TDIS	0x00000100
-#define TXx927_SIDISR_RDIS	0x00000080
-#define TXx927_SIDISR_STIS	0x00000040
-#define TXx927_SIDISR_RFDN_MASK	0x0000001f
-
-/* SICISR : Change Int. Status */
-#define TXx927_SICISR_OERS	0x00000020
-#define TXx927_SICISR_CTSS	0x00000010
-#define TXx927_SICISR_RBRKD	0x00000008
-#define TXx927_SICISR_TRDY	0x00000004
-#define TXx927_SICISR_TXALS	0x00000002
-#define TXx927_SICISR_UBRKD	0x00000001
-
-/* SIFCR : FIFO Control */
-#define TXx927_SIFCR_SWRST	0x00008000
-#define TXx927_SIFCR_RDIL_MASK	0x00000180
-#define TXx927_SIFCR_RDIL_1	0x00000000
-#define TXx927_SIFCR_RDIL_4	0x00000080
-#define TXx927_SIFCR_RDIL_8	0x00000100
-#define TXx927_SIFCR_RDIL_12	0x00000180
-#define TXx927_SIFCR_RDIL_MAX	0x00000180
-#define TXx927_SIFCR_TDIL_MASK	0x00000018
-#define TXx927_SIFCR_TDIL_MASK	0x00000018
-#define TXx927_SIFCR_TDIL_1	0x00000000
-#define TXx927_SIFCR_TDIL_4	0x00000001
-#define TXx927_SIFCR_TDIL_8	0x00000010
-#define TXx927_SIFCR_TDIL_MAX	0x00000010
-#define TXx927_SIFCR_TFRST	0x00000004
-#define TXx927_SIFCR_RFRST	0x00000002
-#define TXx927_SIFCR_FRSTE	0x00000001
-#define TXx927_SIO_TX_FIFO	8
-#define TXx927_SIO_RX_FIFO	16
-
-/* SIFLCR : Flow Control */
-#define TXx927_SIFLCR_RCS	0x00001000
-#define TXx927_SIFLCR_TES	0x00000800
-#define TXx927_SIFLCR_RTSSC	0x00000200
-#define TXx927_SIFLCR_RSDE	0x00000100
-#define TXx927_SIFLCR_TSDE	0x00000080
-#define TXx927_SIFLCR_RTSTL_MASK	0x0000001e
-#define TXx927_SIFLCR_RTSTL_MAX	0x0000001e
-#define TXx927_SIFLCR_TBRK	0x00000001
-
-/* SIBGR : Baudrate Control */
-#define TXx927_SIBGR_BCLK_MASK	0x00000300
-#define TXx927_SIBGR_BCLK_T0	0x00000000
-#define TXx927_SIBGR_BCLK_T2	0x00000100
-#define TXx927_SIBGR_BCLK_T4	0x00000200
-#define TXx927_SIBGR_BCLK_T6	0x00000300
-#define TXx927_SIBGR_BRD_MASK	0x000000ff
-
-/*
- * PIO
- */
-
-#endif /* __ASM_TXX9_TXX927_H */
diff --git a/include/asm-mips/txx9irq.h b/include/asm-mips/txx9irq.h
index 1c439e5..5620879 100644
--- a/include/asm-mips/txx9irq.h
+++ b/include/asm-mips/txx9irq.h
@@ -14,8 +14,12 @@
 #ifdef CONFIG_IRQ_CPU
 #define TXX9_IRQ_BASE	(MIPS_CPU_IRQ_BASE + 8)
 #else
+#ifdef CONFIG_I8259
+#define TXX9_IRQ_BASE	(I8259A_IRQ_BASE + 16)
+#else
 #define TXX9_IRQ_BASE	0
 #endif
+#endif
 
 #ifdef CONFIG_CPU_TX39XX
 #define TXx9_MAX_IR 16
diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h
index 63a5533..24d79e3 100644
--- a/include/asm-powerpc/cpm.h
+++ b/include/asm-powerpc/cpm.h
@@ -3,6 +3,7 @@
 
 #include <linux/compiler.h>
 #include <linux/types.h>
+#include <linux/of.h>
 
 /* Opcodes common to CPM1 and CPM2
 */
@@ -100,4 +101,6 @@ unsigned long cpm_muram_offset(void __iomem *addr);
 dma_addr_t cpm_muram_dma(void __iomem *addr);
 int cpm_command(u32 command, u8 opcode);
 
+int cpm2_gpiochip_add32(struct device_node *np);
+
 #endif
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index 2c7fd9c..2a6fa01 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -12,6 +12,7 @@
 
 #include <asm/immap_cpm2.h>
 #include <asm/cpm.h>
+#include <sysdev/fsl_soc.h>
 
 #ifdef CONFIG_PPC_85xx
 #define CPM_MAP_ADDR (get_immrbase() + 0x80000)
@@ -93,10 +94,40 @@ extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
 #define cpm_dpfree cpm_muram_free
 #define cpm_dpram_addr cpm_muram_addr
 
-extern void cpm_setbrg(uint brg, uint rate);
-extern void cpm2_fastbrg(uint brg, uint rate, int div16);
 extern void cpm2_reset(void);
 
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST		((uint)0x00020000)
+#define CPM_BRG_EN		((uint)0x00010000)
+#define CPM_BRG_EXTC_INT	((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9	((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15	((uint)0x00008000)
+#define CPM_BRG_ATB		((uint)0x00002000)
+#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
+#define CPM_BRG_DIV16		((uint)0x00000001)
+
+#define CPM2_BRG_INT_CLK	(get_brgfreq())
+#define CPM2_BRG_UART_CLK	(CPM2_BRG_INT_CLK/16)
+
+extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src);
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+static inline void cpm_setbrg(uint brg, uint rate)
+{
+	__cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT);
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+static inline void cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+	__cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
+}
+
 /* Function code bits, usually generic to devices.
 */
 #define CPMFCR_GBL	((u_char)0x20)	/* Set memory snooping */
@@ -195,17 +226,6 @@ typedef struct smc_uart {
 #define SMCM_TX		((unsigned char)0x02)
 #define SMCM_RX		((unsigned char)0x01)
 
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST		((uint)0x00020000)
-#define CPM_BRG_EN		((uint)0x00010000)
-#define CPM_BRG_EXTC_INT	((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK3_9	((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK5_15	((uint)0x00008000)
-#define CPM_BRG_ATB		((uint)0x00002000)
-#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
-#define CPM_BRG_DIV16		((uint)0x00000001)
-
 /* SCCs.
 */
 #define SCC_GSMRH_IRP		((uint)0x00040000)
diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h
index 5fc78c0..74c6f38 100644
--- a/include/asm-powerpc/pgtable-ppc64.h
+++ b/include/asm-powerpc/pgtable-ppc64.h
@@ -461,6 +461,8 @@ void pgtable_cache_init(void);
 	return pt;
 }
 
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */
diff --git a/include/asm-s390/hardirq.h b/include/asm-s390/hardirq.h
index 4b7cb96..89ec705 100644
--- a/include/asm-s390/hardirq.h
+++ b/include/asm-s390/hardirq.h
@@ -34,4 +34,18 @@ typedef struct {
 
 void clock_comparator_work(void);
 
+static inline unsigned long long local_tick_disable(void)
+{
+	unsigned long long old;
+
+	old = S390_lowcore.clock_comparator;
+	S390_lowcore.clock_comparator = -1ULL;
+	return old;
+}
+
+static inline void local_tick_enable(unsigned long long comp)
+{
+	S390_lowcore.clock_comparator = comp;
+}
+
 #endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-s390/ipl.h b/include/asm-s390/ipl.h
index eaca6df..1171e6d 100644
--- a/include/asm-s390/ipl.h
+++ b/include/asm-s390/ipl.h
@@ -159,7 +159,8 @@ enum diag308_vm_flags {
 };
 
 enum diag308_rc {
-	DIAG308_RC_OK	= 1,
+	DIAG308_RC_OK		= 0x0001,
+	DIAG308_RC_NOCONFIG	= 0x0102,
 };
 
 extern int diag308(unsigned long subcode, void *addr);
diff --git a/include/asm-s390/schid.h b/include/asm-s390/schid.h
index 7bdc0fe..825503c 100644
--- a/include/asm-s390/schid.h
+++ b/include/asm-s390/schid.h
@@ -11,6 +11,7 @@ struct subchannel_id {
 } __attribute__ ((packed, aligned(4)));
 
 #ifdef __KERNEL__
+#include <linux/string.h>
 
 /* Helper function for sane state of pre-allocated subchannel_id. */
 static inline void
diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h
index 4ba14e4..2bd9fae 100644
--- a/include/asm-s390/setup.h
+++ b/include/asm-s390/setup.h
@@ -65,7 +65,6 @@ extern unsigned long machine_flags;
 
 #define MACHINE_FLAG_VM		(1UL << 0)
 #define MACHINE_FLAG_IEEE	(1UL << 1)
-#define MACHINE_FLAG_P390	(1UL << 2)
 #define MACHINE_FLAG_CSP	(1UL << 3)
 #define MACHINE_FLAG_MVPG	(1UL << 4)
 #define MACHINE_FLAG_DIAG44	(1UL << 5)
diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h
index 583da80..c8ad350 100644
--- a/include/asm-s390/unistd.h
+++ b/include/asm-s390/unistd.h
@@ -259,7 +259,13 @@
 #define __NR_timerfd_create	319
 #define __NR_timerfd_settime	320
 #define __NR_timerfd_gettime	321
-#define NR_syscalls 322
+#define __NR_signalfd4		322
+#define __NR_eventfd2		323
+#define __NR_inotify_init1	324
+#define __NR_pipe2		325
+#define __NR_dup3		326
+#define __NR_epoll_create1	327
+#define NR_syscalls 328
 
 /* 
  * There are some system calls that are not present on 64 bit, some
diff --git a/include/asm-sh/cpu-sh2a/addrspace.h b/include/asm-sh/cpu-sh2a/addrspace.h
deleted file mode 100644
index 795ddd6..0000000
--- a/include/asm-sh/cpu-sh2a/addrspace.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H
-#define __ASM_SH_CPU_SH2A_ADDRSPACE_H
-
-#define P0SEG		0x00000000
-#define P1SEG		0x00000000
-#define P2SEG		0x20000000
-#define P3SEG		0x00000000
-#define P4SEG		0x80000000
-
-#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */
diff --git a/include/asm-sh/cpu-sh2a/cacheflush.h b/include/asm-sh/cpu-sh2a/cacheflush.h
deleted file mode 100644
index fa3186c..0000000
--- a/include/asm-sh/cpu-sh2a/cacheflush.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/cacheflush.h>
diff --git a/include/asm-sh/cpu-sh2a/dma.h b/include/asm-sh/cpu-sh2a/dma.h
deleted file mode 100644
index 0d5ad85..0000000
--- a/include/asm-sh/cpu-sh2a/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/dma.h>
diff --git a/include/asm-sh/cpu-sh2a/mmu_context.h b/include/asm-sh/cpu-sh2a/mmu_context.h
deleted file mode 100644
index cd2387f..0000000
--- a/include/asm-sh/cpu-sh2a/mmu_context.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/mmu_context.h>
diff --git a/include/asm-sh/cpu-sh2a/timer.h b/include/asm-sh/cpu-sh2a/timer.h
deleted file mode 100644
index fee504a..0000000
--- a/include/asm-sh/cpu-sh2a/timer.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/timer.h>
diff --git a/include/asm-sh/cpu-sh2a/ubc.h b/include/asm-sh/cpu-sh2a/ubc.h
deleted file mode 100644
index cf28062..0000000
--- a/include/asm-sh/cpu-sh2a/ubc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/ubc.h>
diff --git a/include/asm-sh/cpu-sh2a/watchdog.h b/include/asm-sh/cpu-sh2a/watchdog.h
deleted file mode 100644
index c1b3e24..0000000
--- a/include/asm-sh/cpu-sh2a/watchdog.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/cpu-sh2/watchdog.h>
diff --git a/include/asm-sh/cpu-sh3/addrspace.h b/include/asm-sh/cpu-sh3/addrspace.h
deleted file mode 100644
index 0f94726..0000000
--- a/include/asm-sh/cpu-sh3/addrspace.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH-3 CPUs.
- */
-#ifndef __ASM_CPU_SH3_ADDRSPACE_H
-#define __ASM_CPU_SH3_ADDRSPACE_H
-
-#define P0SEG		0x00000000
-#define P1SEG		0x80000000
-#define P2SEG		0xa0000000
-#define P3SEG		0xc0000000
-#define P4SEG		0xe0000000
-
-#endif /* __ASM_CPU_SH3_ADDRSPACE_H */
diff --git a/include/asm-sh/cpu-sh3/cacheflush.h b/include/asm-sh/cpu-sh3/cacheflush.h
deleted file mode 100644
index f70d8ef7..0000000
--- a/include/asm-sh/cpu-sh3/cacheflush.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/cacheflush.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
-#define __ASM_CPU_SH3_CACHEFLUSH_H
-
-/*
- * Cache flushing:
- *
- *  - flush_cache_all() flushes entire cache
- *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
- *  - flush_cache_dup mm(mm) handles cache flushing when forking
- *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- *  - flush_cache_range(vma, start, end) flushes a range of pages
- *
- *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
- *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- *
- *  Caches are indexed (effectively) by physical address on SH-3, so
- *  we don't need them.
- */
-
-#if defined(CONFIG_SH7705_CACHE_32KB)
-
-/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
- * SH4. Unlike the SH4 this is a unified cache so we need to do some work
- * in mmap when 'exec'ing a new binary
- */
- /* 32KB cache, 4kb PAGE sizes need to check bit 12 */
-#define CACHE_ALIAS 0x00001000
-
-#define PG_mapped	PG_arch_1
-
-void flush_cache_all(void);
-void flush_cache_mm(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-                              unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
-void flush_dcache_page(struct page *pg);
-void flush_icache_range(unsigned long start, unsigned long end);
-void flush_icache_page(struct vm_area_struct *vma, struct page *page);
-#else
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma,pg)		do { } while (0)
-#endif
-
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
-/* SH3 has unified cache so no special action needed here */
-#define flush_cache_sigtramp(vaddr)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
-
-#define p3_cache_init()				do { } while (0)
-
-#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
diff --git a/include/asm-sh/cpu-sh3/rtc.h b/include/asm-sh/cpu-sh3/rtc.h
deleted file mode 100644
index 319404a..0000000
--- a/include/asm-sh/cpu-sh3/rtc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_SH_CPU_SH3_RTC_H
-#define __ASM_SH_CPU_SH3_RTC_H
-
-#define rtc_reg_size		sizeof(u16)
-#define RTC_BIT_INVERTED	0	/* No bug on SH7708, SH7709A */
-#define RTC_DEF_CAPABILITIES	0UL
-
-#endif /* __ASM_SH_CPU_SH3_RTC_H */
diff --git a/include/asm-sh/cpu-sh3/sigcontext.h b/include/asm-sh/cpu-sh3/sigcontext.h
deleted file mode 100644
index 17310dc..0000000
--- a/include/asm-sh/cpu-sh3/sigcontext.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __ASM_CPU_SH3_SIGCONTEXT_H
-#define __ASM_CPU_SH3_SIGCONTEXT_H
-
-struct sigcontext {
-	unsigned long	oldmask;
-
-	/* CPU registers */
-	unsigned long sc_regs[16];
-	unsigned long sc_pc;
-	unsigned long sc_pr;
-	unsigned long sc_sr;
-	unsigned long sc_gbr;
-	unsigned long sc_mach;
-	unsigned long sc_macl;
-};
-
-#endif /* __ASM_CPU_SH3_SIGCONTEXT_H */
diff --git a/include/asm-sh/cpu-sh5/timer.h b/include/asm-sh/cpu-sh5/timer.h
deleted file mode 100644
index 88da9b3..0000000
--- a/include/asm-sh/cpu-sh5/timer.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_SH_CPU_SH5_TIMER_H
-#define __ASM_SH_CPU_SH5_TIMER_H
-
-#endif /* __ASM_SH_CPU_SH5_TIMER_H */
diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h
index ecc8061..5f888cc 100644
--- a/include/asm-x86/iommu.h
+++ b/include/asm-x86/iommu.h
@@ -7,6 +7,8 @@ extern struct dma_mapping_ops nommu_dma_ops;
 extern int force_iommu, no_iommu;
 extern int iommu_detected;
 
+extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len);
+
 #ifdef CONFIG_GART_IOMMU
 extern int gart_iommu_aperture;
 extern int gart_iommu_aperture_allowed;
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 96a89d3..5c7f946 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -38,8 +38,9 @@
 #define CN_W1_VAL			0x1
 #define CN_IDX_V86D			0x4
 #define CN_VAL_V86D_UVESAFB		0x1
+#define CN_IDX_BB			0x5	/* BlackBoard, from the TSP GPL sampling framework */
 
-#define CN_NETLINK_USERS		5
+#define CN_NETLINK_USERS		6
 
 /*
  * Maximum connector's message size.
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 2270ca5..6fd5668 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -106,6 +106,7 @@ struct cpufreq_policy {
 #define CPUFREQ_ADJUST		(0)
 #define CPUFREQ_INCOMPATIBLE	(1)
 #define CPUFREQ_NOTIFY		(2)
+#define CPUFREQ_START		(3)
 
 #define CPUFREQ_SHARED_TYPE_NONE (0) /* None */
 #define CPUFREQ_SHARED_TYPE_HW	 (1) /* HW does needed coordination */
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 96d0509..d3219d7 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -287,7 +287,7 @@ static inline const cpumask_t *get_cpu_mask(unsigned int cpu)
  * gcc optimizes it out (it's a constant) and there's no huge stack
  * variable created:
  */
-#define cpumask_of_cpu(cpu) ({ *get_cpu_mask(cpu); })
+#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu))
 
 
 #define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS)
diff --git a/include/linux/iommu-helper.h b/include/linux/iommu-helper.h
index f8598f5..c975caf 100644
--- a/include/linux/iommu-helper.h
+++ b/include/linux/iommu-helper.h
@@ -8,4 +8,3 @@ extern unsigned long iommu_area_alloc(unsigned long *map, unsigned long size,
 				      unsigned long align_mask);
 extern void iommu_area_free(unsigned long *map, unsigned long start,
 			    unsigned int nr);
-extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len);
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 2cd07cc..22d2115 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -118,6 +118,10 @@ extern int allocate_resource(struct resource *root, struct resource *new,
 int adjust_resource(struct resource *res, resource_size_t start,
 		    resource_size_t size);
 resource_size_t resource_alignment(struct resource *res);
+static inline resource_size_t resource_size(struct resource *res)
+{
+	return res->end - res->start + 1;
+}
 
 /* Convenience shorthand with allocation */
 #define request_region(start,n,name)	__request_region(&ioport_resource, (start), (n), (name))
diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h
index 57aefa1..b961448 100644
--- a/include/linux/kallsyms.h
+++ b/include/linux/kallsyms.h
@@ -108,8 +108,7 @@ static inline void print_fn_descriptor_symbol(const char *fmt, void *addr)
 
 static inline void print_ip_sym(unsigned long ip)
 {
-	printk("[<%p>]", (void *) ip);
-	print_symbol(" %s\n", ip);
+	printk("[<%p>] %pS\n", (void *) ip, (void *) ip);
 }
 
 #endif /*_LINUX_KALLSYMS_H*/
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index fdbbf72..aaa998f 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -75,6 +75,12 @@ extern const char linux_proc_banner[];
  */
 #define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))
 
+/**
+ * lower_32_bits - return bits 0-31 of a number
+ * @n: the number we're accessing
+ */
+#define lower_32_bits(n) ((u32)(n))
+
 #define	KERN_EMERG	"<0>"	/* system is unusable			*/
 #define	KERN_ALERT	"<1>"	/* action must be taken immediately	*/
 #define	KERN_CRIT	"<2>"	/* critical conditions			*/
diff --git a/include/linux/maple.h b/include/linux/maple.h
index 523a286..c853b10 100644
--- a/include/linux/maple.h
+++ b/include/linux/maple.h
@@ -2,6 +2,7 @@
 #define __LINUX_MAPLE_H
 
 #include <linux/device.h>
+#include <mach/maple.h>
 
 extern struct bus_type maple_bus_type;
 
@@ -33,6 +34,7 @@ struct mapleq {
 	void *sendbuf, *recvbuf, *recvbufdcsp;
 	unsigned char length;
 	enum maple_code command;
+	struct mutex mutex;
 };
 
 struct maple_devinfo {
@@ -69,7 +71,9 @@ void maple_getcond_callback(struct maple_device *dev,
 			    unsigned long interval,
 			    unsigned long function);
 int maple_driver_register(struct device_driver *drv);
-void maple_add_packet(struct mapleq *mq);
+int maple_add_packet_sleeps(struct maple_device *mdev, u32 function,
+	u32 command, u32 length, void *data);
+void maple_clear_dev(struct maple_device *mdev);
 
 #define to_maple_dev(n) container_of(n, struct maple_device, dev)
 #define to_maple_driver(n) container_of(n, struct maple_driver, drv)
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 866a3db..335288bf 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -744,6 +744,8 @@ struct zap_details {
 struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
 		pte_t pte);
 
+int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
+		unsigned long size);
 unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address,
 		unsigned long size, struct zap_details *);
 unsigned long unmap_vmas(struct mmu_gather **tlb,
@@ -1041,7 +1043,6 @@ extern unsigned long absent_pages_in_range(unsigned long start_pfn,
 extern void get_pfn_range_for_nid(unsigned int nid,
 			unsigned long *start_pfn, unsigned long *end_pfn);
 extern unsigned long find_min_pfn_with_active_regions(void);
-extern unsigned long find_max_pfn_with_active_regions(void);
 extern void free_bootmem_with_active_regions(int nid,
 						unsigned long max_low_pfn);
 typedef int (*work_fn_t)(unsigned long, unsigned long, void *);
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 54590a9..25aaccd 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -239,9 +239,6 @@ static inline void __SetPageUptodate(struct page *page)
 {
 	smp_wmb();
 	__set_bit(PG_uptodate, &(page)->flags);
-#ifdef CONFIG_S390
-	page_clear_dirty(page);
-#endif
 }
 
 static inline void SetPageUptodate(struct page *page)
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index a39b38c..69ed3cb 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -143,6 +143,29 @@ static inline int page_cache_get_speculative(struct page *page)
 	return 1;
 }
 
+/*
+ * Same as above, but add instead of inc (could just be merged)
+ */
+static inline int page_cache_add_speculative(struct page *page, int count)
+{
+	VM_BUG_ON(in_interrupt());
+
+#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU)
+# ifdef CONFIG_PREEMPT
+	VM_BUG_ON(!in_atomic());
+# endif
+	VM_BUG_ON(page_count(page) == 0);
+	atomic_add(count, &page->_count);
+
+#else
+	if (unlikely(!atomic_add_unless(&page->_count, count, 0)))
+		return 0;
+#endif
+	VM_BUG_ON(PageCompound(page) && page != compound_head(page));
+
+	return 1;
+}
+
 static inline int page_freeze_refs(struct page *page, int count)
 {
 	return likely(atomic_cmpxchg(&page->_count, count, 0) == count);
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index 68ed19c..ea96ead 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -78,6 +78,7 @@ enum power_supply_property {
 	POWER_SUPPLY_PROP_CHARGE_EMPTY,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_CHARGE_AVG,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
 	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
 	POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
 	POWER_SUPPLY_PROP_ENERGY_FULL,
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index c5f6e54..741d1a6 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -68,7 +68,8 @@ enum rfkill_state {
  * @user_claim_unsupported: Whether the hardware supports exclusive
  *	RF-kill control by userspace. Set this before registering.
  * @user_claim: Set when the switch is controlled exlusively by userspace.
- * @mutex: Guards switch state transitions
+ * @mutex: Guards switch state transitions.  It serializes callbacks
+ *	and also protects the state.
  * @data: Pointer to the RF button drivers private data which will be
  *	passed along when toggling radio state.
  * @toggle_radio(): Mandatory handler to control state of the radio.
@@ -89,12 +90,13 @@ struct rfkill {
 	const char *name;
 	enum rfkill_type type;
 
-	enum rfkill_state state;
 	bool user_claim_unsupported;
 	bool user_claim;
 
+	/* the mutex serializes callbacks and also protects
+	 * the state */
 	struct mutex mutex;
-
+	enum rfkill_state state;
 	void *data;
 	int (*toggle_radio)(void *data, enum rfkill_state state);
 	int (*get_state)(void *data, enum rfkill_state *state);
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 7ea44f6..a640385 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -316,7 +316,10 @@ struct sk_buff {
 #ifdef CONFIG_IPV6_NDISC_NODETYPE
 	__u8			ndisc_nodetype:2;
 #endif
-	/* 14 bit hole */
+#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
+	__u8			do_not_encrypt:1;
+#endif
+	/* 0/13/14 bit hole */
 
 #ifdef CONFIG_NET_DMA
 	dma_cookie_t		dma_cookie;
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index 5df62ef..7a6e6bb 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -214,6 +214,8 @@ enum
 	LINUX_MIB_TCPDSACKIGNOREDOLD,		/* TCPSACKIgnoredOld */
 	LINUX_MIB_TCPDSACKIGNOREDNOUNDO,	/* TCPSACKIgnoredNoUndo */
 	LINUX_MIB_TCPSPURIOUSRTOS,		/* TCPSpuriousRTOs */
+	LINUX_MIB_TCPMD5NOTFOUND,		/* TCPMD5NotFound */
+	LINUX_MIB_TCPMD5UNEXPECTED,		/* TCPMD5Unexpected */
 	__LINUX_MIB_MAX
 };
 
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4dd3d93..b527210 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -206,8 +206,6 @@ struct ieee80211_bss_conf {
  * These flags are used with the @flags member of &ieee80211_tx_info.
  *
  * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame.
- * @IEEE80211_TX_CTL_DO_NOT_ENCRYPT: send this frame without encryption;
- *	e.g., for EAPOL frame
  * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame
  * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g.,
  *	for combined 802.11g / 802.11b networks)
@@ -220,7 +218,6 @@ struct ieee80211_bss_conf {
  * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD
  * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the
  *	through set_retry_limit configured long retry value
- * @IEEE80211_TX_CTL_EAPOL_FRAME: internal to mac80211
  * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
  * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU
  * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number
@@ -253,7 +250,6 @@ struct ieee80211_bss_conf {
  */
 enum mac80211_tx_control_flags {
 	IEEE80211_TX_CTL_REQ_TX_STATUS		= BIT(0),
-	IEEE80211_TX_CTL_DO_NOT_ENCRYPT		= BIT(1),
 	IEEE80211_TX_CTL_USE_RTS_CTS		= BIT(2),
 	IEEE80211_TX_CTL_USE_CTS_PROTECT	= BIT(3),
 	IEEE80211_TX_CTL_NO_ACK			= BIT(4),
@@ -263,7 +259,6 @@ enum mac80211_tx_control_flags {
 	IEEE80211_TX_CTL_FIRST_FRAGMENT		= BIT(8),
 	IEEE80211_TX_CTL_SHORT_PREAMBLE		= BIT(9),
 	IEEE80211_TX_CTL_LONG_RETRY_LIMIT	= BIT(10),
-	IEEE80211_TX_CTL_EAPOL_FRAME		= BIT(11),
 	IEEE80211_TX_CTL_SEND_AFTER_DTIM	= BIT(12),
 	IEEE80211_TX_CTL_AMPDU			= BIT(13),
 	IEEE80211_TX_CTL_OFDM_HT		= BIT(14),
@@ -323,7 +318,6 @@ struct ieee80211_tx_info {
 			struct ieee80211_vif *vif;
 			struct ieee80211_key_conf *hw_key;
 			unsigned long jiffies;
-			int ifindex;
 			u16 aid;
 			s8 rts_cts_rate_idx, alt_retry_rate_idx;
 			u8 retry_limit;
@@ -746,7 +740,6 @@ enum ieee80211_tkip_key_type {
  * 	Measurement, Channel Switch, Quieting, TPC
  */
 enum ieee80211_hw_flags {
-	IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE		= 1<<0,
 	IEEE80211_HW_RX_INCLUDES_FCS			= 1<<1,
 	IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING	= 1<<2,
 	IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE		= 1<<3,
diff --git a/init/calibrate.c b/init/calibrate.c
index 7963e3f..a379c90 100644
--- a/init/calibrate.c
+++ b/init/calibrate.c
@@ -170,7 +170,7 @@ void __cpuinit calibrate_delay(void)
 				loops_per_jiffy &= ~loopbit;
 		}
 	}
-	printk(KERN_INFO "%lu.%02lu BogoMIPS (lpj=%lu)\n",
+	printk(KERN_CONT "%lu.%02lu BogoMIPS (lpj=%lu)\n",
 			loops_per_jiffy/(500000/HZ),
 			(loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
 }
diff --git a/init/main.c b/init/main.c
index 20fdc98..9c3b68b 100644
--- a/init/main.c
+++ b/init/main.c
@@ -635,10 +635,11 @@ asmlinkage void __init start_kernel(void)
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (initrd_start && !initrd_below_start_ok &&
-	    page_to_pfn(virt_to_page(initrd_start)) < min_low_pfn) {
+	    page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) {
 		printk(KERN_CRIT "initrd overwritten (0x%08lx < 0x%08lx) - "
 		    "disabling it.\n",
-		    page_to_pfn(virt_to_page(initrd_start)), min_low_pfn);
+		    page_to_pfn(virt_to_page((void *)initrd_start)),
+		    min_low_pfn);
 		initrd_start = 0;
 	}
 #endif
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 657f8f8..13932abd 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -355,6 +355,17 @@ static struct css_set *find_existing_css_set(
 	return NULL;
 }
 
+static void free_cg_links(struct list_head *tmp)
+{
+	struct cg_cgroup_link *link;
+	struct cg_cgroup_link *saved_link;
+
+	list_for_each_entry_safe(link, saved_link, tmp, cgrp_link_list) {
+		list_del(&link->cgrp_link_list);
+		kfree(link);
+	}
+}
+
 /*
  * allocate_cg_links() allocates "count" cg_cgroup_link structures
  * and chains them on tmp through their cgrp_link_list fields. Returns 0 on
@@ -363,17 +374,12 @@ static struct css_set *find_existing_css_set(
 static int allocate_cg_links(int count, struct list_head *tmp)
 {
 	struct cg_cgroup_link *link;
-	struct cg_cgroup_link *saved_link;
 	int i;
 	INIT_LIST_HEAD(tmp);
 	for (i = 0; i < count; i++) {
 		link = kmalloc(sizeof(*link), GFP_KERNEL);
 		if (!link) {
-			list_for_each_entry_safe(link, saved_link, tmp,
-						 cgrp_link_list) {
-				list_del(&link->cgrp_link_list);
-				kfree(link);
-			}
+			free_cg_links(tmp);
 			return -ENOMEM;
 		}
 		list_add(&link->cgrp_link_list, tmp);
@@ -381,17 +387,6 @@ static int allocate_cg_links(int count, struct list_head *tmp)
 	return 0;
 }
 
-static void free_cg_links(struct list_head *tmp)
-{
-	struct cg_cgroup_link *link;
-	struct cg_cgroup_link *saved_link;
-
-	list_for_each_entry_safe(link, saved_link, tmp, cgrp_link_list) {
-		list_del(&link->cgrp_link_list);
-		kfree(link);
-	}
-}
-
 /*
  * find_css_set() takes an existing cgroup group and a
  * cgroup object, and returns a css_set object that's
@@ -956,7 +951,6 @@ static int cgroup_get_sb(struct file_system_type *fs_type,
 	struct super_block *sb;
 	struct cgroupfs_root *root;
 	struct list_head tmp_cg_links;
-	INIT_LIST_HEAD(&tmp_cg_links);
 
 	/* First find the desired set of subsystems */
 	ret = parse_cgroupfs_options(data, &opts);
@@ -1424,14 +1418,17 @@ static ssize_t cgroup_write_string(struct cgroup *cgrp, struct cftype *cft,
 		if (buffer == NULL)
 			return -ENOMEM;
 	}
-	if (nbytes && copy_from_user(buffer, userbuf, nbytes))
-		return -EFAULT;
+	if (nbytes && copy_from_user(buffer, userbuf, nbytes)) {
+		retval = -EFAULT;
+		goto out;
+	}
 
 	buffer[nbytes] = 0;     /* nul-terminate */
 	strstrip(buffer);
 	retval = cft->write_string(cgrp, cft, buffer);
 	if (!retval)
 		retval = nbytes;
+out:
 	if (buffer != local_buffer)
 		kfree(buffer);
 	return retval;
@@ -2371,7 +2368,7 @@ static int cgroup_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	return cgroup_create(c_parent, dentry, mode | S_IFDIR);
 }
 
-static inline int cgroup_has_css_refs(struct cgroup *cgrp)
+static int cgroup_has_css_refs(struct cgroup *cgrp)
 {
 	/* Check the reference count on each subsystem. Since we
 	 * already established that there are no tasks in the
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 91cf85b..d5ab79c 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -54,7 +54,6 @@
 #include <asm/uaccess.h>
 #include <asm/atomic.h>
 #include <linux/mutex.h>
-#include <linux/kfifo.h>
 #include <linux/workqueue.h>
 #include <linux/cgroup.h>
 
@@ -486,13 +485,38 @@ static int cpusets_overlap(struct cpuset *a, struct cpuset *b)
 static void
 update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c)
 {
-	if (!dattr)
-		return;
 	if (dattr->relax_domain_level < c->relax_domain_level)
 		dattr->relax_domain_level = c->relax_domain_level;
 	return;
 }
 
+static void
+update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c)
+{
+	LIST_HEAD(q);
+
+	list_add(&c->stack_list, &q);
+	while (!list_empty(&q)) {
+		struct cpuset *cp;
+		struct cgroup *cont;
+		struct cpuset *child;
+
+		cp = list_first_entry(&q, struct cpuset, stack_list);
+		list_del(q.next);
+
+		if (cpus_empty(cp->cpus_allowed))
+			continue;
+
+		if (is_sched_load_balance(cp))
+			update_domain_attr(dattr, cp);
+
+		list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
+			child = cgroup_cs(cont);
+			list_add_tail(&child->stack_list, &q);
+		}
+	}
+}
+
 /*
  * rebuild_sched_domains()
  *
@@ -532,7 +556,7 @@ update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c)
  * So the reverse nesting would risk an ABBA deadlock.
  *
  * The three key local variables below are:
- *    q  - a kfifo queue of cpuset pointers, used to implement a
+ *    q  - a linked-list queue of cpuset pointers, used to implement a
  *	   top-down scan of all cpusets.  This scan loads a pointer
  *	   to each cpuset marked is_sched_load_balance into the
  *	   array 'csa'.  For our purposes, rebuilding the schedulers
@@ -567,7 +591,7 @@ update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c)
 
 void rebuild_sched_domains(void)
 {
-	struct kfifo *q;	/* queue of cpusets to be scanned */
+	LIST_HEAD(q);		/* queue of cpusets to be scanned*/
 	struct cpuset *cp;	/* scans q */
 	struct cpuset **csa;	/* array of all cpuset ptrs */
 	int csn;		/* how many cpuset ptrs in csa so far */
@@ -577,7 +601,6 @@ void rebuild_sched_domains(void)
 	int ndoms;		/* number of sched domains in result */
 	int nslot;		/* next empty doms[] cpumask_t slot */
 
-	q = NULL;
 	csa = NULL;
 	doms = NULL;
 	dattr = NULL;
@@ -591,35 +614,42 @@ void rebuild_sched_domains(void)
 		dattr = kmalloc(sizeof(struct sched_domain_attr), GFP_KERNEL);
 		if (dattr) {
 			*dattr = SD_ATTR_INIT;
-			update_domain_attr(dattr, &top_cpuset);
+			update_domain_attr_tree(dattr, &top_cpuset);
 		}
 		*doms = top_cpuset.cpus_allowed;
 		goto rebuild;
 	}
 
-	q = kfifo_alloc(number_of_cpusets * sizeof(cp), GFP_KERNEL, NULL);
-	if (IS_ERR(q))
-		goto done;
 	csa = kmalloc(number_of_cpusets * sizeof(cp), GFP_KERNEL);
 	if (!csa)
 		goto done;
 	csn = 0;
 
-	cp = &top_cpuset;
-	__kfifo_put(q, (void *)&cp, sizeof(cp));
-	while (__kfifo_get(q, (void *)&cp, sizeof(cp))) {
+	list_add(&top_cpuset.stack_list, &q);
+	while (!list_empty(&q)) {
 		struct cgroup *cont;
 		struct cpuset *child;   /* scans child cpusets of cp */
 
+		cp = list_first_entry(&q, struct cpuset, stack_list);
+		list_del(q.next);
+
 		if (cpus_empty(cp->cpus_allowed))
 			continue;
 
-		if (is_sched_load_balance(cp))
+		/*
+		 * All child cpusets contain a subset of the parent's cpus, so
+		 * just skip them, and then we call update_domain_attr_tree()
+		 * to calc relax_domain_level of the corresponding sched
+		 * domain.
+		 */
+		if (is_sched_load_balance(cp)) {
 			csa[csn++] = cp;
+			continue;
+		}
 
 		list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
 			child = cgroup_cs(cont);
-			__kfifo_put(q, (void *)&child, sizeof(cp));
+			list_add_tail(&child->stack_list, &q);
 		}
   	}
 
@@ -686,7 +716,7 @@ restart:
 					cpus_or(*dp, *dp, b->cpus_allowed);
 					b->pn = -1;
 					if (dattr)
-						update_domain_attr(dattr
+						update_domain_attr_tree(dattr
 								   + nslot, b);
 				}
 			}
@@ -702,8 +732,6 @@ rebuild:
 	put_online_cpus();
 
 done:
-	if (q && !IS_ERR(q))
-		kfifo_free(q);
 	kfree(csa);
 	/* Don't kfree(doms) -- partition_sched_domains() does that. */
 	/* Don't kfree(dattr) -- partition_sched_domains() does that. */
@@ -1833,24 +1861,21 @@ static void remove_tasks_in_empty_cpuset(struct cpuset *cs)
  */
 static void scan_for_empty_cpusets(const struct cpuset *root)
 {
+	LIST_HEAD(queue);
 	struct cpuset *cp;	/* scans cpusets being updated */
 	struct cpuset *child;	/* scans child cpusets of cp */
-	struct list_head queue;
 	struct cgroup *cont;
 	nodemask_t oldmems;
 
-	INIT_LIST_HEAD(&queue);
-
 	list_add_tail((struct list_head *)&root->stack_list, &queue);
 
 	while (!list_empty(&queue)) {
-		cp = container_of(queue.next, struct cpuset, stack_list);
+		cp = list_first_entry(&queue, struct cpuset, stack_list);
 		list_del(queue.next);
 		list_for_each_entry(cont, &cp->css.cgroup->children, sibling) {
 			child = cgroup_cs(cont);
 			list_add_tail(&child->stack_list, &queue);
 		}
-		cont = cp->css.cgroup;
 
 		/* Continue past cpusets with all cpus, mems online */
 		if (cpus_subset(cp->cpus_allowed, cpu_online_map) &&
diff --git a/kernel/marker.c b/kernel/marker.c
index 971da53..7d1faec 100644
--- a/kernel/marker.c
+++ b/kernel/marker.c
@@ -126,6 +126,11 @@ void marker_probe_cb(const struct marker *mdata, void *call_private, ...)
 		struct marker_probe_closure *multi;
 		int i;
 		/*
+		 * Read mdata->ptype before mdata->multi.
+		 */
+		smp_rmb();
+		multi = mdata->multi;
+		/*
 		 * multi points to an array, therefore accessing the array
 		 * depends on reading multi. However, even in this case,
 		 * we must insure that the pointer is read _before_ the array
@@ -133,7 +138,6 @@ void marker_probe_cb(const struct marker *mdata, void *call_private, ...)
 		 * in the fast path, so put the explicit barrier here.
 		 */
 		smp_read_barrier_depends();
-		multi = mdata->multi;
 		for (i = 0; multi[i].func; i++) {
 			va_start(args, call_private);
 			multi[i].func(multi[i].probe_private, call_private,
@@ -175,6 +179,11 @@ void marker_probe_cb_noarg(const struct marker *mdata, void *call_private, ...)
 		struct marker_probe_closure *multi;
 		int i;
 		/*
+		 * Read mdata->ptype before mdata->multi.
+		 */
+		smp_rmb();
+		multi = mdata->multi;
+		/*
 		 * multi points to an array, therefore accessing the array
 		 * depends on reading multi. However, even in this case,
 		 * we must insure that the pointer is read _before_ the array
@@ -182,7 +191,6 @@ void marker_probe_cb_noarg(const struct marker *mdata, void *call_private, ...)
 		 * in the fast path, so put the explicit barrier here.
 		 */
 		smp_read_barrier_depends();
-		multi = mdata->multi;
 		for (i = 0; multi[i].func; i++)
 			multi[i].func(multi[i].probe_private, call_private,
 				mdata->format, &args);
diff --git a/kernel/printk.c b/kernel/printk.c
index a7f7559..b51b156 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -1309,14 +1309,14 @@ void tty_write_message(struct tty_struct *tty, char *msg)
 
 #if defined CONFIG_PRINTK
 
-DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10);
 /*
  * printk rate limiting, lifted from the networking subsystem.
  *
- * This enforces a rate limit: not more than one kernel message
- * every printk_ratelimit_jiffies to make a denial-of-service
- * attack impossible.
+ * This enforces a rate limit: not more than 10 kernel messages
+ * every 5s to make a denial-of-service attack impossible.
  */
+DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10);
+
 int printk_ratelimit(void)
 {
 	return __ratelimit(&printk_ratelimit_state);
diff --git a/kernel/resource.c b/kernel/resource.c
index 74af2d7..f5b518e 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -490,7 +490,7 @@ resource_size_t resource_alignment(struct resource *res)
 {
 	switch (res->flags & (IORESOURCE_SIZEALIGN | IORESOURCE_STARTALIGN)) {
 	case IORESOURCE_SIZEALIGN:
-		return res->end - res->start + 1;
+		return resource_size(res);
 	case IORESOURCE_STARTALIGN:
 		return res->start;
 	default:
diff --git a/kernel/sched.c b/kernel/sched.c
index 0236958..21f7da9 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -7671,34 +7671,34 @@ static ssize_t sched_power_savings_store(const char *buf, size_t count, int smt)
 }
 
 #ifdef CONFIG_SCHED_MC
-static ssize_t sched_mc_power_savings_show(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *page)
+static ssize_t sched_mc_power_savings_show(struct sysdev_class *class,
+					   char *page)
 {
 	return sprintf(page, "%u\n", sched_mc_power_savings);
 }
-static ssize_t sched_mc_power_savings_store(struct sys_device *dev,
-					    struct sysdev_attribute *attr,
+static ssize_t sched_mc_power_savings_store(struct sysdev_class *class,
 					    const char *buf, size_t count)
 {
 	return sched_power_savings_store(buf, count, 0);
 }
-static SYSDEV_ATTR(sched_mc_power_savings, 0644, sched_mc_power_savings_show,
-		   sched_mc_power_savings_store);
+static SYSDEV_CLASS_ATTR(sched_mc_power_savings, 0644,
+			 sched_mc_power_savings_show,
+			 sched_mc_power_savings_store);
 #endif
 
 #ifdef CONFIG_SCHED_SMT
-static ssize_t sched_smt_power_savings_show(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *page)
+static ssize_t sched_smt_power_savings_show(struct sysdev_class *dev,
+					    char *page)
 {
 	return sprintf(page, "%u\n", sched_smt_power_savings);
 }
-static ssize_t sched_smt_power_savings_store(struct sys_device *dev,
-					     struct sysdev_attribute *attr,
+static ssize_t sched_smt_power_savings_store(struct sysdev_class *dev,
 					     const char *buf, size_t count)
 {
 	return sched_power_savings_store(buf, count, 1);
 }
-static SYSDEV_ATTR(sched_smt_power_savings, 0644, sched_smt_power_savings_show,
+static SYSDEV_CLASS_ATTR(sched_smt_power_savings, 0644,
+		   sched_smt_power_savings_show,
 		   sched_smt_power_savings_store);
 #endif
 
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index ec7e4f6..4a26a13 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -830,10 +830,21 @@ struct workqueue_struct *__create_workqueue_key(const char *name,
 		start_workqueue_thread(cwq, -1);
 	} else {
 		cpu_maps_update_begin();
+		/*
+		 * We must place this wq on list even if the code below fails.
+		 * cpu_down(cpu) can remove cpu from cpu_populated_map before
+		 * destroy_workqueue() takes the lock, in that case we leak
+		 * cwq[cpu]->thread.
+		 */
 		spin_lock(&workqueue_lock);
 		list_add(&wq->list, &workqueues);
 		spin_unlock(&workqueue_lock);
-
+		/*
+		 * We must initialize cwqs for each possible cpu even if we
+		 * are going to call destroy_workqueue() finally. Otherwise
+		 * cpu_up() can hit the uninitialized cwq once we drop the
+		 * lock.
+		 */
 		for_each_possible_cpu(cpu) {
 			cwq = init_cpu_workqueue(wq, cpu);
 			if (err || !cpu_online(cpu))
diff --git a/lib/iommu-helper.c b/lib/iommu-helper.c
index 889ddce..a3b8d4c 100644
--- a/lib/iommu-helper.c
+++ b/lib/iommu-helper.c
@@ -80,11 +80,3 @@ void iommu_area_free(unsigned long *map, unsigned long start, unsigned int nr)
 	}
 }
 EXPORT_SYMBOL(iommu_area_free);
-
-unsigned long iommu_num_pages(unsigned long addr, unsigned long len)
-{
-	unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE);
-
-	return size >> PAGE_SHIFT;
-}
-EXPORT_SYMBOL(iommu_num_pages);
diff --git a/mm/filemap.c b/mm/filemap.c
index 42bbc69..d97d1ad 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1879,7 +1879,7 @@ void iov_iter_advance(struct iov_iter *i, size_t bytes)
 		 * The !iov->iov_len check ensures we skip over unlikely
 		 * zero-length segments (without overruning the iovec).
 		 */
-		while (bytes || unlikely(!iov->iov_len && i->count)) {
+		while (bytes || unlikely(i->count && !iov->iov_len)) {
 			int copy;
 
 			copy = min(bytes, iov->iov_len - base);
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 254ce2b..d237a02 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -17,7 +17,7 @@
 #include <linux/mutex.h>
 #include <linux/bootmem.h>
 #include <linux/sysfs.h>
-
+#include <asm/io.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
diff --git a/mm/madvise.c b/mm/madvise.c
index 23a0ec3..f9349c1 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -132,10 +132,10 @@ static long madvise_willneed(struct vm_area_struct * vma,
  * Application no longer needs these pages.  If the pages are dirty,
  * it's OK to just throw them away.  The app will be more careful about
  * data it wants to keep.  Be sure to free swap resources too.  The
- * zap_page_range call sets things up for refill_inactive to actually free
+ * zap_page_range call sets things up for shrink_active_list to actually free
  * these pages later if no one else has touched them in the meantime,
  * although we could add these pages to a global reuse list for
- * refill_inactive to pick up before reclaiming other pages.
+ * shrink_active_list to pick up before reclaiming other pages.
  *
  * NB: This interface discards data rather than pushes it out to swap,
  * as some implementations do.  This has performance implications for
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index fba566c..7056c3b 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1168,9 +1168,6 @@ static void mem_cgroup_move_task(struct cgroup_subsys *ss,
 	mem = mem_cgroup_from_cont(cont);
 	old_mem = mem_cgroup_from_cont(old_cont);
 
-	if (mem == old_mem)
-		goto out;
-
 	/*
 	 * Only thread group leaders are allowed to migrate, the mm_struct is
 	 * in effect owned by the leader
diff --git a/mm/memory.c b/mm/memory.c
index 67f0ab9..0e4eea1 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -993,6 +993,30 @@ unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address,
 		tlb_finish_mmu(tlb, address, end);
 	return end;
 }
+EXPORT_SYMBOL_GPL(zap_page_range);
+
+/**
+ * zap_vma_ptes - remove ptes mapping the vma
+ * @vma: vm_area_struct holding ptes to be zapped
+ * @address: starting address of pages to zap
+ * @size: number of bytes to zap
+ *
+ * This function only unmaps ptes assigned to VM_PFNMAP vmas.
+ *
+ * The entire address range must be fully contained within the vma.
+ *
+ * Returns 0 if successful.
+ */
+int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
+		unsigned long size)
+{
+	if (address < vma->vm_start || address + size > vma->vm_end ||
+	    		!(vma->vm_flags & VM_PFNMAP))
+		return -1;
+	zap_page_range(vma, address, size, NULL);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(zap_vma_ptes);
 
 /*
  * Do a quick page-table lookup for a single page.
@@ -1087,6 +1111,7 @@ no_page_table:
 	}
 	return page;
 }
+EXPORT_SYMBOL_GPL(follow_page);
 
 /* Can we do the FOLL_ANON optimization? */
 static inline int use_zero_page(struct vm_area_struct *vma)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 3cf3d05..401d104 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3753,23 +3753,6 @@ unsigned long __init find_min_pfn_with_active_regions(void)
 	return find_min_pfn_for_node(MAX_NUMNODES);
 }
 
-/**
- * find_max_pfn_with_active_regions - Find the maximum PFN registered
- *
- * It returns the maximum PFN based on information provided via
- * add_active_range().
- */
-unsigned long __init find_max_pfn_with_active_regions(void)
-{
-	int i;
-	unsigned long max_pfn = 0;
-
-	for (i = 0; i < nr_nodemap_entries; i++)
-		max_pfn = max(max_pfn, early_node_map[i].end_pfn);
-
-	return max_pfn;
-}
-
 /*
  * early_calculate_totalpages()
  * Sum pages in active regions for movable zone.
diff --git a/mm/rmap.c b/mm/rmap.c
index 99bc3f9..94a5246 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -667,7 +667,8 @@ void page_remove_rmap(struct page *page, struct vm_area_struct *vma)
 		 * Leaving it set also helps swapoff to reinstate ptes
 		 * faster for those pages still in swapcache.
 		 */
-		if (page_test_dirty(page)) {
+		if ((!PageAnon(page) || PageSwapCache(page)) &&
+		    page_test_dirty(page)) {
 			page_clear_dirty(page);
 			set_page_dirty(page);
 		}
diff --git a/mm/swap.c b/mm/swap.c
index dd89234..7417a2a 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -278,9 +278,10 @@ int lru_add_drain_all(void)
  * Avoid taking zone->lru_lock if possible, but if it is taken, retain it
  * for the remainder of the operation.
  *
- * The locking in this function is against shrink_cache(): we recheck the
- * page count inside the lock to see whether shrink_cache grabbed the page
- * via the LRU.  If it did, give up: shrink_cache will free it.
+ * The locking in this function is against shrink_inactive_list(): we recheck
+ * the page count inside the lock to see whether shrink_inactive_list()
+ * grabbed the page via the LRU.  If it did, give up: shrink_inactive_list()
+ * will free it.
  */
 void release_pages(struct page **pages, int nr, int cold)
 {
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 6beb625..bb7f796 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -656,8 +656,8 @@ static int unuse_mm(struct mm_struct *mm,
 
 	if (!down_read_trylock(&mm->mmap_sem)) {
 		/*
-		 * Activate page so shrink_cache is unlikely to unmap its
-		 * ptes while lock is dropped, so swapoff can make progress.
+		 * Activate page so shrink_inactive_list is unlikely to unmap
+		 * its ptes while lock is dropped, so swapoff can make progress.
 		 */
 		activate_page(page);
 		unlock_page(page);
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 8f71761..75be453 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1408,7 +1408,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
 		if (sc->nr_scanned && priority < DEF_PRIORITY - 2)
 			congestion_wait(WRITE, HZ/10);
 	}
-	/* top priority shrink_caches still had more to do? don't OOM, then */
+	/* top priority shrink_zones still had more to do? don't OOM, then */
 	if (!sc->all_unreclaimable && scan_global_lru(sc))
 		ret = nr_reclaimed;
 out:
@@ -1979,7 +1979,7 @@ module_init(kswapd_init)
 int zone_reclaim_mode __read_mostly;
 
 #define RECLAIM_OFF 0
-#define RECLAIM_ZONE (1<<0)	/* Run shrink_cache on the zone */
+#define RECLAIM_ZONE (1<<0)	/* Run shrink_inactive_list on the zone */
 #define RECLAIM_WRITE (1<<1)	/* Writeout pages during reclaim */
 #define RECLAIM_SWAP (1<<2)	/* Swap pages out during reclaim */
 
diff --git a/net/Kconfig b/net/Kconfig
index b986687..7612cc8 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -2,9 +2,7 @@
 # Network configuration
 #
 
-menu "Networking"
-
-config NET
+menuconfig NET
 	bool "Networking support"
 	---help---
 	  Unless you really know what you are doing, you should say Y here.
@@ -22,7 +20,6 @@ config NET
 	  recommended to read the NET-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-# Make sure that all config symbols are dependent on NET
 if NET
 
 menu "Networking options"
@@ -252,5 +249,3 @@ source "net/rfkill/Kconfig"
 source "net/9p/Kconfig"
 
 endif   # if NET
-endmenu # Networking
-
diff --git a/net/core/dev.c b/net/core/dev.c
index 8d13a9b..63d6bcd 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2100,7 +2100,7 @@ static int ing_filter(struct sk_buff *skb)
 	rxq = &dev->rx_queue;
 
 	q = rxq->qdisc;
-	if (q) {
+	if (q != &noop_qdisc) {
 		spin_lock(qdisc_lock(q));
 		result = qdisc_enqueue_root(skb, q);
 		spin_unlock(qdisc_lock(q));
@@ -2113,7 +2113,7 @@ static inline struct sk_buff *handle_ing(struct sk_buff *skb,
 					 struct packet_type **pt_prev,
 					 int *ret, struct net_device *orig_dev)
 {
-	if (!skb->dev->rx_queue.qdisc)
+	if (skb->dev->rx_queue.qdisc == &noop_qdisc)
 		goto out;
 
 	if (*pt_prev) {
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 4e0c922..8464017 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -485,6 +485,9 @@ static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb)
 	C(head);
 	C(data);
 	C(truesize);
+#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
+	C(do_not_encrypt);
+#endif
 	atomic_set(&n->users, 1);
 
 	atomic_inc(&(skb_shinfo(skb)->dataref));
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index 834356e..8f5a403 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -232,6 +232,8 @@ static const struct snmp_mib snmp4_net_list[] = {
 	SNMP_MIB_ITEM("TCPDSACKIgnoredOld", LINUX_MIB_TCPDSACKIGNOREDOLD),
 	SNMP_MIB_ITEM("TCPDSACKIgnoredNoUndo", LINUX_MIB_TCPDSACKIGNOREDNOUNDO),
 	SNMP_MIB_ITEM("TCPSpuriousRTOs", LINUX_MIB_TCPSPURIOUSRTOS),
+	SNMP_MIB_ITEM("TCPMD5NotFound", LINUX_MIB_TCPMD5NOTFOUND),
+	SNMP_MIB_ITEM("TCPMD5Unexpected", LINUX_MIB_TCPMD5UNEXPECTED),
 	SNMP_MIB_SENTINEL
 };
 
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index a2b06d0..b3875c0 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1116,18 +1116,12 @@ static int tcp_v4_inbound_md5_hash(struct sock *sk, struct sk_buff *skb)
 		return 0;
 
 	if (hash_expected && !hash_location) {
-		LIMIT_NETDEBUG(KERN_INFO "MD5 Hash expected but NOT found "
-			       "(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n",
-			       NIPQUAD(iph->saddr), ntohs(th->source),
-			       NIPQUAD(iph->daddr), ntohs(th->dest));
+		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5NOTFOUND);
 		return 1;
 	}
 
 	if (!hash_expected && hash_location) {
-		LIMIT_NETDEBUG(KERN_INFO "MD5 Hash NOT expected but found "
-			       "(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n",
-			       NIPQUAD(iph->saddr), ntohs(th->source),
-			       NIPQUAD(iph->daddr), ntohs(th->dest));
+		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5UNEXPECTED);
 		return 1;
 	}
 
diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index f7b535d..410046a 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -732,7 +732,7 @@ int datagram_send_ctl(struct net *net,
 			LIMIT_NETDEBUG(KERN_DEBUG "invalid cmsg type: %d\n",
 				       cmsg->cmsg_type);
 			err = -EINVAL;
-			break;
+			goto exit_f;
 		}
 	}
 
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index f82f607..0179b66 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -286,7 +286,6 @@ proc_net_fail:
 
 void ipv6_misc_proc_exit(void)
 {
-	proc_net_remove(&init_net, "sockstat6");
 	proc_net_remove(&init_net, "dev_snmp6");
 	proc_net_remove(&init_net, "snmp6");
 	unregister_pernet_subsys(&ipv6_proc_ops);
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index cff778b..1db4521 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -849,28 +849,17 @@ static int tcp_v6_inbound_md5_hash (struct sock *sk, struct sk_buff *skb)
 	hash_expected = tcp_v6_md5_do_lookup(sk, &ip6h->saddr);
 	hash_location = tcp_parse_md5sig_option(th);
 
-	/* do we have a hash as expected? */
-	if (!hash_expected) {
-		if (!hash_location)
-			return 0;
-		if (net_ratelimit()) {
-			printk(KERN_INFO "MD5 Hash NOT expected but found "
-			       "(" NIP6_FMT ", %u)->"
-			       "(" NIP6_FMT ", %u)\n",
-			       NIP6(ip6h->saddr), ntohs(th->source),
-			       NIP6(ip6h->daddr), ntohs(th->dest));
-		}
+	/* We've parsed the options - do we have a hash? */
+	if (!hash_expected && !hash_location)
+		return 0;
+
+	if (hash_expected && !hash_location) {
+		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5NOTFOUND);
 		return 1;
 	}
 
-	if (!hash_location) {
-		if (net_ratelimit()) {
-			printk(KERN_INFO "MD5 Hash expected but NOT found "
-			       "(" NIP6_FMT ", %u)->"
-			       "(" NIP6_FMT ", %u)\n",
-			       NIP6(ip6h->saddr), ntohs(th->source),
-			       NIP6(ip6h->daddr), ntohs(th->dest));
-		}
+	if (!hash_expected && hash_location) {
+		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5UNEXPECTED);
 		return 1;
 	}
 
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 8e7ba0e..297c257 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -81,6 +81,7 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex,
 				  enum nl80211_iftype type, u32 *flags,
 				  struct vif_params *params)
 {
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct net_device *dev;
 	enum ieee80211_if_types itype;
 	struct ieee80211_sub_if_data *sdata;
@@ -95,6 +96,9 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex,
 	if (itype == IEEE80211_IF_TYPE_INVALID)
 		return -EINVAL;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
 	ret = ieee80211_if_change_type(sdata, itype);
@@ -117,12 +121,16 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
 			     u8 key_idx, u8 *mac_addr,
 			     struct key_params *params)
 {
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta = NULL;
 	enum ieee80211_key_alg alg;
 	struct ieee80211_key *key;
 	int err;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
 	switch (params->cipher) {
@@ -167,10 +175,14 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
 			     u8 key_idx, u8 *mac_addr)
 {
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta;
 	int ret;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
 	rcu_read_lock();
@@ -211,7 +223,8 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
 			     void (*callback)(void *cookie,
 					      struct key_params *params))
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta = NULL;
 	u8 seq[6] = {0};
 	struct key_params params;
@@ -220,6 +233,11 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
 	u16 iv16;
 	int err = -ENOENT;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	rcu_read_lock();
 
 	if (mac_addr) {
@@ -293,8 +311,12 @@ static int ieee80211_config_default_key(struct wiphy *wiphy,
 					struct net_device *dev,
 					u8 key_idx)
 {
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct ieee80211_sub_if_data *sdata;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	rcu_read_lock();
 
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
@@ -475,9 +497,15 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
 static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
 				struct beacon_parameters *params)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct beacon_data *old;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
 		return -EINVAL;
 
@@ -492,9 +520,15 @@ static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
 				struct beacon_parameters *params)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct beacon_data *old;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
 		return -EINVAL;
 
@@ -508,9 +542,15 @@ static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
 
 static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct beacon_data *old;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
 		return -EINVAL;
 
@@ -646,11 +686,14 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 				 u8 *mac, struct station_parameters *params)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct sta_info *sta;
 	struct ieee80211_sub_if_data *sdata;
 	int err;
 
+	if (dev == local->mdev || params->vlan == local->mdev)
+		return -EOPNOTSUPP;
+
 	/* Prevent a race with changing the rate control algorithm */
 	if (!netif_running(dev))
 		return -ENETDOWN;
@@ -701,10 +744,15 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev,
 				 u8 *mac)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (mac) {
 		rcu_read_lock();
 
@@ -730,10 +778,13 @@ static int ieee80211_change_station(struct wiphy *wiphy,
 				    u8 *mac,
 				    struct station_parameters *params)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct sta_info *sta;
 	struct ieee80211_sub_if_data *vlansdata;
 
+	if (dev == local->mdev || params->vlan == local->mdev)
+		return -EOPNOTSUPP;
+
 	rcu_read_lock();
 
 	/* XXX: get sta belonging to dev */
@@ -752,7 +803,7 @@ static int ieee80211_change_station(struct wiphy *wiphy,
 			return -EINVAL;
 		}
 
-		sta->sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
+		sta->sdata = vlansdata;
 		ieee80211_send_layer2_update(sta);
 	}
 
@@ -767,15 +818,20 @@ static int ieee80211_change_station(struct wiphy *wiphy,
 static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev,
 				 u8 *dst, u8 *next_hop)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct mesh_path *mpath;
 	struct sta_info *sta;
 	int err;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	if (!netif_running(dev))
 		return -ENETDOWN;
 
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
 		return -ENOTSUPP;
 
@@ -817,14 +873,19 @@ static int ieee80211_change_mpath(struct wiphy *wiphy,
 				    struct net_device *dev,
 				    u8 *dst, u8 *next_hop)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct mesh_path *mpath;
 	struct sta_info *sta;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
 	if (!netif_running(dev))
 		return -ENETDOWN;
 
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
 		return -ENOTSUPP;
 
@@ -891,9 +952,15 @@ static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev,
 			       u8 *dst, u8 *next_hop, struct mpath_info *pinfo)
 
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct mesh_path *mpath;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
 		return -ENOTSUPP;
 
@@ -913,9 +980,15 @@ static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev,
 				 int idx, u8 *dst, u8 *next_hop,
 				 struct mpath_info *pinfo)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
 	struct mesh_path *mpath;
 
+	if (dev == local->mdev)
+		return -EOPNOTSUPP;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
 	if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT)
 		return -ENOTSUPP;
 
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index f1a83d4..a4c5b90 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1233,18 +1233,12 @@ static void ieee80211_tasklet_handler(unsigned long data)
 /* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to
  * make a prepared TX frame (one that has been given to hw) to look like brand
  * new IEEE 802.11 frame that is ready to go through TX processing again.
- * Also, tx_packet_data in cb is restored from tx_control. */
+ */
 static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
 				      struct ieee80211_key *key,
 				      struct sk_buff *skb)
 {
 	int hdrlen, iv_len, mic_len;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
-	info->flags &=	IEEE80211_TX_CTL_REQ_TX_STATUS |
-			IEEE80211_TX_CTL_DO_NOT_ENCRYPT |
-			IEEE80211_TX_CTL_REQUEUE |
-			IEEE80211_TX_CTL_EAPOL_FRAME;
 
 	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
 
@@ -1731,8 +1725,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 	result = ieee80211_wep_init(local);
 
 	if (result < 0) {
-		printk(KERN_DEBUG "%s: Failed to initialize wep\n",
-		       wiphy_name(local->hw.wiphy));
+		printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
+		       wiphy_name(local->hw.wiphy), result);
 		goto fail_wep;
 	}
 
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index d7c371e..acb0413 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -606,7 +606,6 @@ void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb,
 		      int encrypt)
 {
 	struct ieee80211_sub_if_data *sdata;
-	struct ieee80211_tx_info *info;
 
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	skb->dev = sdata->local->mdev;
@@ -614,11 +613,8 @@ void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb,
 	skb_set_network_header(skb, 0);
 	skb_set_transport_header(skb, 0);
 
-	info = IEEE80211_SKB_CB(skb);
-	memset(info, 0, sizeof(struct ieee80211_tx_info));
-	info->control.ifindex = sdata->dev->ifindex;
-	if (!encrypt)
-		info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+	skb->iif = sdata->dev->ifindex;
+	skb->do_not_encrypt = !encrypt;
 
 	dev_queue_xmit(skb);
 }
@@ -3303,6 +3299,7 @@ void ieee80211_start_mesh(struct net_device *dev)
 	ifsta = &sdata->u.sta;
 	ifsta->state = IEEE80211_MESH_UP;
 	ieee80211_sta_timer((unsigned long)sdata);
+	ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON);
 }
 #endif
 
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 0fbadd8..69019e9 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -305,7 +305,7 @@ static void purge_old_ps_buffers(struct ieee80211_local *local)
 	rcu_read_unlock();
 
 	local->total_ps_buffered = total;
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 	printk(KERN_DEBUG "%s: PS buffers full - purged %d frames\n",
 	       wiphy_name(local->hw.wiphy), purged);
 #endif
@@ -342,7 +342,7 @@ ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx)
 			purge_old_ps_buffers(tx->local);
 		if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >=
 		    AP_MAX_BC_BUFFER) {
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 			if (net_ratelimit()) {
 				printk(KERN_DEBUG "%s: BC TX buffer full - "
 				       "dropping the oldest frame\n",
@@ -389,7 +389,7 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
 			purge_old_ps_buffers(tx->local);
 		if (skb_queue_len(&sta->ps_tx_buf) >= STA_MAX_TX_BUFFER) {
 			struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf);
-#ifdef MAC80211_VERBOSE_PS_DEBUG
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 			if (net_ratelimit()) {
 				printk(KERN_DEBUG "%s: STA %s TX "
 				       "buffer full - dropping oldest frame\n",
@@ -439,14 +439,14 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
 	u16 fc = tx->fc;
 
-	if (unlikely(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
+	if (unlikely(tx->skb->do_not_encrypt))
 		tx->key = NULL;
 	else if (tx->sta && (key = rcu_dereference(tx->sta->key)))
 		tx->key = key;
 	else if ((key = rcu_dereference(tx->sdata->default_key)))
 		tx->key = key;
 	else if (tx->sdata->drop_unencrypted &&
-		 !(info->flags & IEEE80211_TX_CTL_EAPOL_FRAME) &&
+		 (tx->skb->protocol != cpu_to_be16(ETH_P_PAE)) &&
 		 !(info->flags & IEEE80211_TX_CTL_INJECTED)) {
 		I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted);
 		return TX_DROP;
@@ -476,7 +476,7 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
 	}
 
 	if (!tx->key || !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
-		info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+		tx->skb->do_not_encrypt = 1;
 
 	return TX_CONTINUE;
 }
@@ -732,6 +732,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx)
 		memcpy(skb_put(frag, copylen), pos, copylen);
 		memcpy(frag->cb, first->cb, sizeof(frag->cb));
 		skb_copy_queue_mapping(frag, first);
+		frag->do_not_encrypt = first->do_not_encrypt;
 
 		pos += copylen;
 		left -= copylen;
@@ -852,7 +853,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
 
 	sband = tx->local->hw.wiphy->bands[tx->channel->band];
 
-	info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+	skb->do_not_encrypt = 1;
 	info->flags |= IEEE80211_TX_CTL_INJECTED;
 	tx->flags &= ~IEEE80211_TX_FRAGMENTED;
 
@@ -925,8 +926,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
 				skb_trim(skb, skb->len - FCS_LEN);
 			}
 			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP)
-				info->flags &=
-					~IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
+				tx->skb->do_not_encrypt = 0;
 			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG)
 				tx->flags |= IEEE80211_TX_FRAGMENTED;
 			break;
@@ -1042,10 +1042,9 @@ static int ieee80211_tx_prepare(struct ieee80211_tx_data *tx,
 				struct sk_buff *skb,
 				struct net_device *mdev)
 {
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct net_device *dev;
 
-	dev = dev_get_by_index(&init_net, info->control.ifindex);
+	dev = dev_get_by_index(&init_net, skb->iif);
 	if (unlikely(dev && !is_ieee80211_device(dev, mdev))) {
 		dev_put(dev);
 		dev = NULL;
@@ -1306,8 +1305,8 @@ int ieee80211_master_start_xmit(struct sk_buff *skb,
 	bool may_encrypt;
 	int ret;
 
-	if (info->control.ifindex)
-		odev = dev_get_by_index(&init_net, info->control.ifindex);
+	if (skb->iif)
+		odev = dev_get_by_index(&init_net, skb->iif);
 	if (unlikely(odev && !is_ieee80211_device(odev, dev))) {
 		dev_put(odev);
 		odev = NULL;
@@ -1321,9 +1320,13 @@ int ieee80211_master_start_xmit(struct sk_buff *skb,
 		return 0;
 	}
 
+	memset(info, 0, sizeof(*info));
+
+	info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+
 	osdata = IEEE80211_DEV_TO_SUB_IF(odev);
 
-	may_encrypt = !(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT);
+	may_encrypt = !skb->do_not_encrypt;
 
 	headroom = osdata->local->tx_headroom;
 	if (may_encrypt)
@@ -1348,7 +1351,6 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb,
 				 struct net_device *dev)
 {
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_radiotap_header *prthdr =
 		(struct ieee80211_radiotap_header *)skb->data;
 	u16 len_rthdr;
@@ -1371,11 +1373,11 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb,
 	skb->dev = local->mdev;
 
 	/* needed because we set skb device to master */
-	info->control.ifindex = dev->ifindex;
+	skb->iif = dev->ifindex;
 
-	info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
-	/* Interfaces should always request a status report */
-	info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+	/* sometimes we do encrypt injected frames, will be fixed
+	 * up in radiotap parser if not wanted */
+	skb->do_not_encrypt = 0;
 
 	/*
 	 * fix up the pointers accounting for the radiotap
@@ -1419,7 +1421,6 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
 			       struct net_device *dev)
 {
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
-	struct ieee80211_tx_info *info;
 	struct ieee80211_sub_if_data *sdata;
 	int ret = 1, head_need;
 	u16 ethertype, hdrlen,  meshhdrlen = 0;
@@ -1645,14 +1646,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb,
 	nh_pos += hdrlen;
 	h_pos += hdrlen;
 
-	info = IEEE80211_SKB_CB(skb);
-	memset(info, 0, sizeof(*info));
-	info->control.ifindex = dev->ifindex;
-	if (ethertype == ETH_P_PAE)
-		info->flags |= IEEE80211_TX_CTL_EAPOL_FRAME;
-
-	/* Interfaces should always request a status report */
-	info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+	skb->iif = dev->ifindex;
 
 	skb->dev = local->mdev;
 	dev->stats.tx_packets++;
@@ -1922,6 +1916,8 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 
 	info = IEEE80211_SKB_CB(skb);
 
+	skb->do_not_encrypt = 1;
+
 	info->band = band;
 	rate_control_get_rate(local->mdev, sband, skb, &rsel);
 
@@ -1931,7 +1927,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 			       "no rate found\n",
 			       wiphy_name(local->hw.wiphy));
 		}
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		skb = NULL;
 		goto out;
 	}
@@ -1940,7 +1936,6 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 	info->tx_rate_idx = rsel.rate_idx;
 
 	info->flags |= IEEE80211_TX_CTL_NO_ACK;
-	info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT;
 	info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
 	info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
 	if (sdata->bss_conf.use_short_preamble &&
diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c
index 872d2fc..5c2bf0a 100644
--- a/net/mac80211/wep.c
+++ b/net/mac80211/wep.c
@@ -31,13 +31,13 @@ int ieee80211_wep_init(struct ieee80211_local *local)
 	local->wep_tx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0,
 						CRYPTO_ALG_ASYNC);
 	if (IS_ERR(local->wep_tx_tfm))
-		return -ENOMEM;
+		return PTR_ERR(local->wep_tx_tfm);
 
 	local->wep_rx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0,
 						CRYPTO_ALG_ASYNC);
 	if (IS_ERR(local->wep_rx_tfm)) {
 		crypto_free_blkcipher(local->wep_tx_tfm);
-		return -ENOMEM;
+		return PTR_ERR(local->wep_rx_tfm);
 	}
 
 	return 0;
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index 07edda0..28437f0 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -188,6 +188,9 @@ int ieee80211_ht_agg_queue_add(struct ieee80211_local *local,
 {
 	int i;
 
+	/* XXX: currently broken due to cb/requeue use */
+	return -EPERM;
+
 	/* prepare the filter and save it for the SW queue
 	 * matching the received HW queue */
 
diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c
index 7a560b7..c6f2f38 100644
--- a/net/rfkill/rfkill.c
+++ b/net/rfkill/rfkill.c
@@ -130,7 +130,6 @@ static void update_rfkill_state(struct rfkill *rfkill)
 
 /**
  * rfkill_toggle_radio - wrapper for toggle_radio hook
- *
  * @rfkill: the rfkill struct to use
  * @force: calls toggle_radio even if cache says it is not needed,
  *	and also makes sure notifications of the state will be
@@ -141,8 +140,8 @@ static void update_rfkill_state(struct rfkill *rfkill)
  * calls and handling all the red tape such as issuing notifications
  * if the call is successful.
  *
- * Note that @force cannot override a (possibly cached) state of
- * RFKILL_STATE_HARD_BLOCKED.  Any device making use of
+ * Note that the @force parameter cannot override a (possibly cached)
+ * state of RFKILL_STATE_HARD_BLOCKED.  Any device making use of
  * RFKILL_STATE_HARD_BLOCKED implements either get_state() or
  * rfkill_force_state(), so the cache either is bypassed or valid.
  *
@@ -150,7 +149,7 @@ static void update_rfkill_state(struct rfkill *rfkill)
  * even if the radio is in RFKILL_STATE_HARD_BLOCKED state, so as to
  * give the driver a hint that it should double-BLOCK the transmitter.
  *
- * Caller must have aquired rfkill_mutex.
+ * Caller must have acquired rfkill->mutex.
  */
 static int rfkill_toggle_radio(struct rfkill *rfkill,
 				enum rfkill_state state,
@@ -200,12 +199,12 @@ static int rfkill_toggle_radio(struct rfkill *rfkill,
 
 /**
  * rfkill_switch_all - Toggle state of all switches of given type
- * @type: type of interfaces to be affeceted
+ * @type: type of interfaces to be affected
  * @state: the new state
  *
- * This function toggles state of all switches of given type unless
- * a specific switch is claimed by userspace in which case it is
- * left alone.
+ * This function toggles the state of all switches of given type,
+ * unless a specific switch is claimed by userspace (in which case,
+ * that switch is left alone).
  */
 void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
 {
@@ -216,8 +215,11 @@ void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
 	rfkill_states[type] = state;
 
 	list_for_each_entry(rfkill, &rfkill_list, node) {
-		if ((!rfkill->user_claim) && (rfkill->type == type))
+		if ((!rfkill->user_claim) && (rfkill->type == type)) {
+			mutex_lock(&rfkill->mutex);
 			rfkill_toggle_radio(rfkill, state, 0);
+			mutex_unlock(&rfkill->mutex);
+		}
 	}
 
 	mutex_unlock(&rfkill_mutex);
@@ -228,7 +230,7 @@ EXPORT_SYMBOL(rfkill_switch_all);
  * rfkill_epo - emergency power off all transmitters
  *
  * This kicks all rfkill devices to RFKILL_STATE_SOFT_BLOCKED, ignoring
- * everything in its path but rfkill_mutex.
+ * everything in its path but rfkill_mutex and rfkill->mutex.
  */
 void rfkill_epo(void)
 {
@@ -236,7 +238,9 @@ void rfkill_epo(void)
 
 	mutex_lock(&rfkill_mutex);
 	list_for_each_entry(rfkill, &rfkill_list, node) {
+		mutex_lock(&rfkill->mutex);
 		rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
+		mutex_unlock(&rfkill->mutex);
 	}
 	mutex_unlock(&rfkill_mutex);
 }
@@ -252,7 +256,12 @@ EXPORT_SYMBOL_GPL(rfkill_epo);
  * a notification by the firmware/hardware of the current *real*
  * state of the radio rfkill switch.
  *
- * It may not be called from an atomic context.
+ * Devices which are subject to external changes on their rfkill
+ * state (such as those caused by a hardware rfkill line) MUST
+ * have their driver arrange to call rfkill_force_state() as soon
+ * as possible after such a change.
+ *
+ * This function may not be called from an atomic context.
  */
 int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state)
 {
@@ -367,6 +376,9 @@ static ssize_t rfkill_claim_store(struct device *dev,
 	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
 
+	if (rfkill->user_claim_unsupported)
+		return -EOPNOTSUPP;
+
 	/*
 	 * Take the global lock to make sure the kernel is not in
 	 * the middle of rfkill_switch_all
@@ -375,19 +387,17 @@ static ssize_t rfkill_claim_store(struct device *dev,
 	if (error)
 		return error;
 
-	if (rfkill->user_claim_unsupported) {
-		error = -EOPNOTSUPP;
-		goto out_unlock;
-	}
 	if (rfkill->user_claim != claim) {
-		if (!claim)
+		if (!claim) {
+			mutex_lock(&rfkill->mutex);
 			rfkill_toggle_radio(rfkill,
 					    rfkill_states[rfkill->type],
 					    0);
+			mutex_unlock(&rfkill->mutex);
+		}
 		rfkill->user_claim = claim;
 	}
 
-out_unlock:
 	mutex_unlock(&rfkill_mutex);
 
 	return error ? error : count;
@@ -516,8 +526,11 @@ static void rfkill_remove_switch(struct rfkill *rfkill)
 {
 	mutex_lock(&rfkill_mutex);
 	list_del_init(&rfkill->node);
-	rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
 	mutex_unlock(&rfkill_mutex);
+
+	mutex_lock(&rfkill->mutex);
+	rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1);
+	mutex_unlock(&rfkill->mutex);
 }
 
 /**
@@ -526,9 +539,10 @@ static void rfkill_remove_switch(struct rfkill *rfkill)
  * @type: type of the switch (RFKILL_TYPE_*)
  *
  * This function should be called by the network driver when it needs
- * rfkill structure. Once the structure is allocated the driver shoud
- * finish its initialization by setting name, private data, enable_radio
+ * rfkill structure.  Once the structure is allocated the driver should
+ * finish its initialization by setting the name, private data, enable_radio
  * and disable_radio methods and then register it with rfkill_register().
+ *
  * NOTE: If registration fails the structure shoudl be freed by calling
  * rfkill_free() otherwise rfkill_unregister() should be used.
  */
@@ -560,7 +574,7 @@ EXPORT_SYMBOL(rfkill_allocate);
  * rfkill_free - Mark rfkill structure for deletion
  * @rfkill: rfkill structure to be destroyed
  *
- * Decrements reference count of rfkill structure so it is destroyed.
+ * Decrements reference count of the rfkill structure so it is destroyed.
  * Note that rfkill_free() should _not_ be called after rfkill_unregister().
  */
 void rfkill_free(struct rfkill *rfkill)
@@ -585,8 +599,10 @@ static void rfkill_led_trigger_register(struct rfkill *rfkill)
 static void rfkill_led_trigger_unregister(struct rfkill *rfkill)
 {
 #ifdef CONFIG_RFKILL_LEDS
-	if (rfkill->led_trigger.name)
+	if (rfkill->led_trigger.name) {
 		led_trigger_unregister(&rfkill->led_trigger);
+		rfkill->led_trigger.name = NULL;
+	}
 #endif
 }
 
@@ -622,8 +638,8 @@ int rfkill_register(struct rfkill *rfkill)
 
 	error = device_add(dev);
 	if (error) {
-		rfkill_led_trigger_unregister(rfkill);
 		rfkill_remove_switch(rfkill);
+		rfkill_led_trigger_unregister(rfkill);
 		return error;
 	}
 
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index b060164..4840aff 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -572,44 +572,21 @@ static u32 qdisc_alloc_handle(struct net_device *dev)
 static struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue,
 				     struct Qdisc *qdisc)
 {
+	struct Qdisc *oqdisc = dev_queue->qdisc_sleeping;
 	spinlock_t *root_lock;
-	struct Qdisc *oqdisc;
-	int ingress;
-
-	ingress = 0;
-	if (qdisc && qdisc->flags&TCQ_F_INGRESS)
-		ingress = 1;
-
-	if (ingress) {
-		oqdisc = dev_queue->qdisc;
-	} else {
-		oqdisc = dev_queue->qdisc_sleeping;
-	}
 
 	root_lock = qdisc_root_lock(oqdisc);
 	spin_lock_bh(root_lock);
 
-	if (ingress) {
-		/* Prune old scheduler */
-		if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1) {
-			/* delete */
-			qdisc_reset(oqdisc);
-			dev_queue->qdisc = NULL;
-		} else {  /* new */
-			dev_queue->qdisc = qdisc;
-		}
+	/* Prune old scheduler */
+	if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1)
+		qdisc_reset(oqdisc);
 
-	} else {
-		/* Prune old scheduler */
-		if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1)
-			qdisc_reset(oqdisc);
-
-		/* ... and graft new one */
-		if (qdisc == NULL)
-			qdisc = &noop_qdisc;
-		dev_queue->qdisc_sleeping = qdisc;
-		dev_queue->qdisc = &noop_qdisc;
-	}
+	/* ... and graft new one */
+	if (qdisc == NULL)
+		qdisc = &noop_qdisc;
+	dev_queue->qdisc_sleeping = qdisc;
+	dev_queue->qdisc = &noop_qdisc;
 
 	spin_unlock_bh(root_lock);
 
@@ -678,7 +655,8 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent,
 
 		ingress = 0;
 		num_q = dev->num_tx_queues;
-		if (q && q->flags & TCQ_F_INGRESS) {
+		if ((q && q->flags & TCQ_F_INGRESS) ||
+		    (new && new->flags & TCQ_F_INGRESS)) {
 			num_q = 1;
 			ingress = 1;
 		}
@@ -692,13 +670,10 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent,
 			if (!ingress)
 				dev_queue = netdev_get_tx_queue(dev, i);
 
-			if (ingress) {
-				old = dev_graft_qdisc(dev_queue, q);
-			} else {
-				old = dev_graft_qdisc(dev_queue, new);
-				if (new && i > 0)
-					atomic_inc(&new->refcnt);
-			}
+			old = dev_graft_qdisc(dev_queue, new);
+			if (new && i > 0)
+				atomic_inc(&new->refcnt);
+
 			notify_and_destroy(skb, n, classid, old, new);
 		}
 
@@ -817,7 +792,7 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
 				goto err_out3;
 			}
 		}
-		if (parent)
+		if (parent && !(sch->flags & TCQ_F_INGRESS))
 			list_add_tail(&sch->list, &dev_queue->qdisc->list);
 
 		return sch;
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index fd2a6ca..345838a 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -596,7 +596,7 @@ static void transition_one_qdisc(struct net_device *dev,
 	int *need_watchdog_p = _need_watchdog;
 
 	rcu_assign_pointer(dev_queue->qdisc, new_qdisc);
-	if (new_qdisc != &noqueue_qdisc)
+	if (need_watchdog_p && new_qdisc != &noqueue_qdisc)
 		*need_watchdog_p = 1;
 }
 
@@ -619,6 +619,7 @@ void dev_activate(struct net_device *dev)
 
 	need_watchdog = 0;
 	netdev_for_each_tx_queue(dev, transition_one_qdisc, &need_watchdog);
+	transition_one_qdisc(dev, &dev->rx_queue, NULL);
 
 	if (need_watchdog) {
 		dev->trans_start = jiffies;
@@ -677,6 +678,7 @@ void dev_deactivate(struct net_device *dev)
 	bool running;
 
 	netdev_for_each_tx_queue(dev, dev_deactivate_queue, &noop_qdisc);
+	dev_deactivate_queue(dev, &dev->rx_queue, &noop_qdisc);
 
 	dev_watchdog_down(dev);
 
@@ -718,7 +720,7 @@ static void dev_init_scheduler_queue(struct net_device *dev,
 void dev_init_scheduler(struct net_device *dev)
 {
 	netdev_for_each_tx_queue(dev, dev_init_scheduler_queue, &noop_qdisc);
-	dev_init_scheduler_queue(dev, &dev->rx_queue, NULL);
+	dev_init_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc);
 
 	setup_timer(&dev->watchdog_timer, dev_watchdog, (unsigned long)dev);
 }
@@ -745,6 +747,6 @@ static void shutdown_scheduler_queue(struct net_device *dev,
 void dev_shutdown(struct net_device *dev)
 {
 	netdev_for_each_tx_queue(dev, shutdown_scheduler_queue, &noop_qdisc);
-	shutdown_scheduler_queue(dev, &dev->rx_queue, NULL);
+	shutdown_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc);
 	WARN_ON(timer_pending(&dev->watchdog_timer));
 }
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index b7fefff..59eb2cf 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -29,16 +29,16 @@ static struct genl_family nl80211_fam = {
 };
 
 /* internal helper: get drv and dev */
-static int get_drv_dev_by_info_ifindex(struct genl_info *info,
+static int get_drv_dev_by_info_ifindex(struct nlattr **attrs,
 				       struct cfg80211_registered_device **drv,
 				       struct net_device **dev)
 {
 	int ifindex;
 
-	if (!info->attrs[NL80211_ATTR_IFINDEX])
+	if (!attrs[NL80211_ATTR_IFINDEX])
 		return -EINVAL;
 
-	ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
+	ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]);
 	*dev = dev_get_by_index(&init_net, ifindex);
 	if (!*dev)
 		return -ENODEV;
@@ -291,21 +291,31 @@ static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *
 
 	mutex_lock(&cfg80211_drv_mutex);
 	list_for_each_entry(dev, &cfg80211_drv_list, list) {
-		if (++wp_idx < wp_start)
+		if (wp_idx < wp_start) {
+			wp_idx++;
 			continue;
+		}
 		if_idx = 0;
 
 		mutex_lock(&dev->devlist_mtx);
 		list_for_each_entry(wdev, &dev->netdev_list, list) {
-			if (++if_idx < if_start)
+			if (if_idx < if_start) {
+				if_idx++;
 				continue;
+			}
 			if (nl80211_send_iface(skb, NETLINK_CB(cb->skb).pid,
 					       cb->nlh->nlmsg_seq, NLM_F_MULTI,
-					       wdev->netdev) < 0)
-				break;
+					       wdev->netdev) < 0) {
+				mutex_unlock(&dev->devlist_mtx);
+				goto out;
+			}
+			if_idx++;
 		}
 		mutex_unlock(&dev->devlist_mtx);
+
+		wp_idx++;
 	}
+ out:
 	mutex_unlock(&cfg80211_drv_mutex);
 
 	cb->args[0] = wp_idx;
@@ -321,7 +331,7 @@ static int nl80211_get_interface(struct sk_buff *skb, struct genl_info *info)
 	struct net_device *netdev;
 	int err;
 
-	err = get_drv_dev_by_info_ifindex(info, &dev, &netdev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &dev, &netdev);
 	if (err)
 		return err;
 
@@ -392,7 +402,7 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
 	} else
 		return -EINVAL;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 	ifindex = dev->ifindex;
@@ -477,7 +487,7 @@ static int nl80211_del_interface(struct sk_buff *skb, struct genl_info *info)
 	int ifindex, err;
 	struct net_device *dev;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 	ifindex = dev->ifindex;
@@ -545,7 +555,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_MAC])
 		mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -618,7 +628,7 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
 	if (!info->attrs[NL80211_ATTR_KEY_DEFAULT])
 		return -EINVAL;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -699,7 +709,7 @@ static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
 		return -EINVAL;
 	}
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -735,7 +745,7 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_MAC])
 		mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -764,7 +774,7 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info)
 	struct beacon_parameters params;
 	int haveinfo = 0;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -843,7 +853,7 @@ static int nl80211_del_beacon(struct sk_buff *skb, struct genl_info *info)
 	int err;
 	struct net_device *dev;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -937,67 +947,78 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
 }
 
 static int nl80211_dump_station(struct sk_buff *skb,
-		struct netlink_callback *cb)
+				struct netlink_callback *cb)
 {
-	int wp_idx = 0;
-	int if_idx = 0;
-	int sta_idx = cb->args[2];
-	int wp_start = cb->args[0];
-	int if_start = cb->args[1];
 	struct station_info sinfo;
 	struct cfg80211_registered_device *dev;
-	struct wireless_dev *wdev;
+	struct net_device *netdev;
 	u8 mac_addr[ETH_ALEN];
+	int ifidx = cb->args[0];
+	int sta_idx = cb->args[1];
 	int err;
-	int exit = 0;
 
-	/* TODO: filter by device */
-	mutex_lock(&cfg80211_drv_mutex);
-	list_for_each_entry(dev, &cfg80211_drv_list, list) {
-		if (exit)
+	if (!ifidx) {
+		err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
+				  nl80211_fam.attrbuf, nl80211_fam.maxattr,
+				  nl80211_policy);
+		if (err)
+			return err;
+
+		if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
+			return -EINVAL;
+
+		ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
+		if (!ifidx)
+			return -EINVAL;
+	}
+
+	netdev = dev_get_by_index(&init_net, ifidx);
+	if (!netdev)
+		return -ENODEV;
+
+	dev = cfg80211_get_dev_from_ifindex(ifidx);
+	if (IS_ERR(dev)) {
+		err = PTR_ERR(dev);
+		goto out_put_netdev;
+	}
+
+	if (!dev->ops->dump_station) {
+		err = -ENOSYS;
+		goto out_err;
+	}
+
+	rtnl_lock();
+
+	while (1) {
+		err = dev->ops->dump_station(&dev->wiphy, netdev, sta_idx,
+					     mac_addr, &sinfo);
+		if (err == -ENOENT)
 			break;
-		if (++wp_idx < wp_start)
-			continue;
-		if_idx = 0;
+		if (err)
+			goto out_err_rtnl;
 
-		mutex_lock(&dev->devlist_mtx);
-		list_for_each_entry(wdev, &dev->netdev_list, list) {
-			if (exit)
-				break;
-			if (++if_idx < if_start)
-				continue;
-			if (!dev->ops->dump_station)
-				continue;
+		if (nl80211_send_station(skb,
+				NETLINK_CB(cb->skb).pid,
+				cb->nlh->nlmsg_seq, NLM_F_MULTI,
+				netdev, mac_addr,
+				&sinfo) < 0)
+			goto out;
 
-			for (;; ++sta_idx) {
-				rtnl_lock();
-				err = dev->ops->dump_station(&dev->wiphy,
-						wdev->netdev, sta_idx, mac_addr,
-						&sinfo);
-				rtnl_unlock();
-				if (err) {
-					sta_idx = 0;
-					break;
-				}
-				if (nl80211_send_station(skb,
-						NETLINK_CB(cb->skb).pid,
-						cb->nlh->nlmsg_seq, NLM_F_MULTI,
-						wdev->netdev, mac_addr,
-						&sinfo) < 0) {
-					exit = 1;
-					break;
-				}
-			}
-		}
-		mutex_unlock(&dev->devlist_mtx);
+		sta_idx++;
 	}
-	mutex_unlock(&cfg80211_drv_mutex);
 
-	cb->args[0] = wp_idx;
-	cb->args[1] = if_idx;
-	cb->args[2] = sta_idx;
 
-	return skb->len;
+ out:
+	cb->args[1] = sta_idx;
+	err = skb->len;
+ out_err_rtnl:
+	rtnl_unlock();
+ out_err:
+	cfg80211_put_dev(dev);
+ out_put_netdev:
+	dev_put(netdev);
+
+	return err;
 }
 
 static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info)
@@ -1016,7 +1037,7 @@ static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info)
 
 	mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1112,7 +1133,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 		params.plink_action =
 		    nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1172,7 +1193,7 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
 				&params.station_flags))
 		return -EINVAL;
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1207,7 +1228,7 @@ static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_MAC])
 		mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1277,68 +1298,78 @@ static int nl80211_send_mpath(struct sk_buff *msg, u32 pid, u32 seq,
 }
 
 static int nl80211_dump_mpath(struct sk_buff *skb,
-		struct netlink_callback *cb)
+			      struct netlink_callback *cb)
 {
-	int wp_idx = 0;
-	int if_idx = 0;
-	int sta_idx = cb->args[2];
-	int wp_start = cb->args[0];
-	int if_start = cb->args[1];
 	struct mpath_info pinfo;
 	struct cfg80211_registered_device *dev;
-	struct wireless_dev *wdev;
+	struct net_device *netdev;
 	u8 dst[ETH_ALEN];
 	u8 next_hop[ETH_ALEN];
+	int ifidx = cb->args[0];
+	int path_idx = cb->args[1];
 	int err;
-	int exit = 0;
 
-	/* TODO: filter by device */
-	mutex_lock(&cfg80211_drv_mutex);
-	list_for_each_entry(dev, &cfg80211_drv_list, list) {
-		if (exit)
+	if (!ifidx) {
+		err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
+				  nl80211_fam.attrbuf, nl80211_fam.maxattr,
+				  nl80211_policy);
+		if (err)
+			return err;
+
+		if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
+			return -EINVAL;
+
+		ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
+		if (!ifidx)
+			return -EINVAL;
+	}
+
+	netdev = dev_get_by_index(&init_net, ifidx);
+	if (!netdev)
+		return -ENODEV;
+
+	dev = cfg80211_get_dev_from_ifindex(ifidx);
+	if (IS_ERR(dev)) {
+		err = PTR_ERR(dev);
+		goto out_put_netdev;
+	}
+
+	if (!dev->ops->dump_mpath) {
+		err = -ENOSYS;
+		goto out_err;
+	}
+
+	rtnl_lock();
+
+	while (1) {
+		err = dev->ops->dump_mpath(&dev->wiphy, netdev, path_idx,
+					   dst, next_hop, &pinfo);
+		if (err == -ENOENT)
 			break;
-		if (++wp_idx < wp_start)
-			continue;
-		if_idx = 0;
+		if (err)
+			goto out_err_rtnl;
 
-		mutex_lock(&dev->devlist_mtx);
-		list_for_each_entry(wdev, &dev->netdev_list, list) {
-			if (exit)
-				break;
-			if (++if_idx < if_start)
-				continue;
-			if (!dev->ops->dump_mpath)
-				continue;
+		if (nl80211_send_mpath(skb, NETLINK_CB(cb->skb).pid,
+				       cb->nlh->nlmsg_seq, NLM_F_MULTI,
+				       netdev, dst, next_hop,
+				       &pinfo) < 0)
+			goto out;
 
-			for (;; ++sta_idx) {
-				rtnl_lock();
-				err = dev->ops->dump_mpath(&dev->wiphy,
-						wdev->netdev, sta_idx, dst,
-						next_hop, &pinfo);
-				rtnl_unlock();
-				if (err) {
-					sta_idx = 0;
-					break;
-				}
-				if (nl80211_send_mpath(skb,
-						NETLINK_CB(cb->skb).pid,
-						cb->nlh->nlmsg_seq, NLM_F_MULTI,
-						wdev->netdev, dst, next_hop,
-						&pinfo) < 0) {
-					exit = 1;
-					break;
-				}
-			}
-		}
-		mutex_unlock(&dev->devlist_mtx);
+		path_idx++;
 	}
-	mutex_unlock(&cfg80211_drv_mutex);
 
-	cb->args[0] = wp_idx;
-	cb->args[1] = if_idx;
-	cb->args[2] = sta_idx;
 
-	return skb->len;
+ out:
+	cb->args[1] = path_idx;
+	err = skb->len;
+ out_err_rtnl:
+	rtnl_unlock();
+ out_err:
+	cfg80211_put_dev(dev);
+ out_put_netdev:
+	dev_put(netdev);
+
+	return err;
 }
 
 static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
@@ -1358,7 +1389,7 @@ static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
 
 	dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1411,7 +1442,7 @@ static int nl80211_set_mpath(struct sk_buff *skb, struct genl_info *info)
 	dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
 	next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1446,7 +1477,7 @@ static int nl80211_new_mpath(struct sk_buff *skb, struct genl_info *info)
 	dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
 	next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
@@ -1475,7 +1506,7 @@ static int nl80211_del_mpath(struct sk_buff *skb, struct genl_info *info)
 	if (info->attrs[NL80211_ATTR_MAC])
 		dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
 
-	err = get_drv_dev_by_info_ifindex(info, &drv, &dev);
+	err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
 	if (err)
 		return err;
 
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 8f038e6..418cd7d 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1468,7 +1468,7 @@ static void section_rel(const char *modname, struct elf_info *elf,
  * marked __initdata will be discarded when the module has been intialized.
  * Likewise for modules used built-in the sections marked __exit
  * are discarded because __exit marked function are supposed to be called
- * only when a moduel is unloaded which never happes for built-in modules.
+ * only when a module is unloaded which never happens for built-in modules.
  * The check_sec_ref() function traverses all relocation records
  * to find all references to a section that reference a section that will
  * be discarded and warns about it.
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 40d06c5..3ae9bec 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -998,8 +998,12 @@ static int selinux_sb_show_options(struct seq_file *m, struct super_block *sb)
 	int rc;
 
 	rc = selinux_get_mnt_opts(sb, &opts);
-	if (rc)
+	if (rc) {
+		/* before policy load we may get EINVAL, don't show anything */
+		if (rc == -EINVAL)
+			rc = 0;
 		return rc;
+	}
 
 	selinux_write_opts(m, &opts);
 
diff --git a/sound/sh/aica.c b/sound/sh/aica.c
index 9ca1133..54df8ba 100644
--- a/sound/sh/aica.c
+++ b/sound/sh/aica.c
@@ -42,7 +42,7 @@
 #include <sound/info.h>
 #include <asm/io.h>
 #include <asm/dma.h>
-#include <asm/dreamcast/sysasic.h>
+#include <mach/sysasic.h>
 #include "aica.h"
 
 MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");