summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/gpio/Kconfig6
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/gpio-tps65912.c156
-rw-r--r--drivers/mfd/Kconfig53
-rw-r--r--drivers/mfd/Makefile8
-rw-r--r--drivers/mfd/aat2870-core.c535
-rw-r--r--drivers/mfd/ab3550-core.c41
-rw-r--r--drivers/mfd/ab8500-core.c231
-rw-r--r--drivers/mfd/ab8500-debugfs.c41
-rw-r--r--drivers/mfd/jz4740-adc.c90
-rw-r--r--drivers/mfd/lpc_sch.c49
-rw-r--r--drivers/mfd/max8997-irq.c2
-rw-r--r--drivers/mfd/omap-usb-host.c4
-rw-r--r--drivers/mfd/stmpe.c2
-rw-r--r--drivers/mfd/stmpe.h1
-rw-r--r--drivers/mfd/tps65910.c13
-rw-r--r--drivers/mfd/tps65911-comparator.c2
-rw-r--r--drivers/mfd/tps65912-core.c177
-rw-r--r--drivers/mfd/tps65912-i2c.c139
-rw-r--r--drivers/mfd/tps65912-irq.c224
-rw-r--r--drivers/mfd/tps65912-spi.c142
-rw-r--r--drivers/mfd/twl-core.c2
-rw-r--r--drivers/mfd/twl4030-madc.c8
-rw-r--r--drivers/mfd/twl6030-pwm.c2
-rw-r--r--drivers/mfd/wm831x-auxadc.c299
-rw-r--r--drivers/mfd/wm831x-core.c259
-rw-r--r--drivers/mfd/wm831x-irq.c77
-rw-r--r--drivers/mfd/wm8350-irq.c18
-rw-r--r--drivers/mfd/wm8994-core.c33
-rw-r--r--drivers/mfd/wm8994-irq.c12
-rw-r--r--drivers/regulator/Kconfig13
-rw-r--r--drivers/regulator/Makefile2
-rw-r--r--drivers/regulator/aat2870-regulator.c232
-rw-r--r--drivers/regulator/tps65912-regulator.c800
-rw-r--r--drivers/video/backlight/Kconfig7
-rw-r--r--drivers/video/backlight/Makefile1
-rw-r--r--drivers/video/backlight/aat2870_bl.c246
-rw-r--r--include/linux/mfd/aat2870.h181
-rw-r--r--include/linux/mfd/ab8500.h8
-rw-r--r--include/linux/mfd/stmpe.h3
-rw-r--r--include/linux/mfd/tps65910.h1
-rw-r--r--include/linux/mfd/tps65912.h327
-rw-r--r--include/linux/mfd/wm831x/core.h119
-rw-r--r--include/linux/mfd/wm831x/pdata.h3
44 files changed, 4118 insertions, 452 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 3634986..6778f56 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -280,6 +280,12 @@ config GPIO_TC3589X
This enables support for the GPIOs found on the TC3589X
I/O Expander.
+config GPIO_TPS65912
+ tristate "TI TPS65912 GPIO"
+ depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
+ help
+ This driver supports TPS65912 gpio chip
+
config GPIO_TWL4030
tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
depends on TWL4030_CORE
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 7207112..4b81d4e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o
obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o
obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o
obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o
+obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o
obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o
obj-$(CONFIG_MACH_U300) += gpio-u300.o
obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o
diff --git a/drivers/gpio/gpio-tps65912.c b/drivers/gpio/gpio-tps65912.c
new file mode 100644
index 0000000..79e66c0
--- /dev/null
+++ b/drivers/gpio/gpio-tps65912.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright 2011 Texas Instruments Inc.
+ *
+ * Author: Margarita Olaya <magi@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This driver is based on wm8350 implementation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/mfd/core.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/mfd/tps65912.h>
+
+struct tps65912_gpio_data {
+ struct tps65912 *tps65912;
+ struct gpio_chip gpio_chip;
+};
+
+static int tps65912_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+ struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+ int val;
+
+ val = tps65912_reg_read(tps65912, TPS65912_GPIO1 + offset);
+
+ if (val & GPIO_STS_MASK)
+ return 1;
+
+ return 0;
+}
+
+static void tps65912_gpio_set(struct gpio_chip *gc, unsigned offset,
+ int value)
+{
+ struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+
+ if (value)
+ tps65912_set_bits(tps65912, TPS65912_GPIO1 + offset,
+ GPIO_SET_MASK);
+ else
+ tps65912_clear_bits(tps65912, TPS65912_GPIO1 + offset,
+ GPIO_SET_MASK);
+}
+
+static int tps65912_gpio_output(struct gpio_chip *gc, unsigned offset,
+ int value)
+{
+ struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+
+ /* Set the initial value */
+ tps65912_gpio_set(gc, offset, value);
+
+ return tps65912_set_bits(tps65912, TPS65912_GPIO1 + offset,
+ GPIO_CFG_MASK);
+}
+
+static int tps65912_gpio_input(struct gpio_chip *gc, unsigned offset)
+{
+ struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+
+ return tps65912_clear_bits(tps65912, TPS65912_GPIO1 + offset,
+ GPIO_CFG_MASK);
+
+}
+
+static struct gpio_chip template_chip = {
+ .label = "tps65912",
+ .owner = THIS_MODULE,
+ .direction_input = tps65912_gpio_input,
+ .direction_output = tps65912_gpio_output,
+ .get = tps65912_gpio_get,
+ .set = tps65912_gpio_set,
+ .can_sleep = 1,
+ .ngpio = 5,
+ .base = -1,
+};
+
+static int __devinit tps65912_gpio_probe(struct platform_device *pdev)
+{
+ struct tps65912 *tps65912 = dev_get_drvdata(pdev->dev.parent);
+ struct tps65912_board *pdata = tps65912->dev->platform_data;
+ struct tps65912_gpio_data *tps65912_gpio;
+ int ret;
+
+ tps65912_gpio = kzalloc(sizeof(*tps65912_gpio), GFP_KERNEL);
+ if (tps65912_gpio == NULL)
+ return -ENOMEM;
+
+ tps65912_gpio->tps65912 = tps65912;
+ tps65912_gpio->gpio_chip = template_chip;
+ tps65912_gpio->gpio_chip.dev = &pdev->dev;
+ if (pdata && pdata->gpio_base)
+ tps65912_gpio->gpio_chip.base = pdata->gpio_base;
+
+ ret = gpiochip_add(&tps65912_gpio->gpio_chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register gpiochip, %d\n", ret);
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, tps65912_gpio);
+
+ return ret;
+
+err:
+ kfree(tps65912_gpio);
+ return ret;
+}
+
+static int __devexit tps65912_gpio_remove(struct platform_device *pdev)
+{
+ struct tps65912_gpio_data *tps65912_gpio = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = gpiochip_remove(&tps65912_gpio->gpio_chip);
+ if (ret == 0)
+ kfree(tps65912_gpio);
+
+ return ret;
+}
+
+static struct platform_driver tps65912_gpio_driver = {
+ .driver = {
+ .name = "tps65912-gpio",
+ .owner = THIS_MODULE,
+ },
+ .probe = tps65912_gpio_probe,
+ .remove = __devexit_p(tps65912_gpio_remove),
+};
+
+static int __init tps65912_gpio_init(void)
+{
+ return platform_driver_register(&tps65912_gpio_driver);
+}
+subsys_initcall(tps65912_gpio_init);
+
+static void __exit tps65912_gpio_exit(void)
+{
+ platform_driver_unregister(&tps65912_gpio_driver);
+}
+module_exit(tps65912_gpio_exit);
+
+MODULE_AUTHOR("Margarita Olaya Cabrera <magi@slimlogic.co.uk>");
+MODULE_DESCRIPTION("GPIO interface for TPS65912 PMICs");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tps65912-gpio");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 37b83eb..21574bd 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -171,6 +171,37 @@ config MFD_TPS6586X
This driver can also be built as a module. If so, the module
will be called tps6586x.
+config MFD_TPS65910
+ bool "TPS65910 Power Management chip"
+ depends on I2C=y && GPIOLIB
+ select MFD_CORE
+ select GPIO_TPS65910
+ help
+ if you say yes here you get support for the TPS65910 series of
+ Power Management chips.
+
+config MFD_TPS65912
+ bool
+ depends on GPIOLIB
+
+config MFD_TPS65912_I2C
+ bool "TPS95612 Power Management chip with I2C"
+ select MFD_CORE
+ select MFD_TPS65912
+ depends on I2C=y && GPIOLIB
+ help
+ If you say yes here you get support for the TPS65912 series of
+ PM chips with I2C interface.
+
+config MFD_TPS65912_SPI
+ bool "TPS65912 Power Management chip with SPI"
+ select MFD_CORE
+ select MFD_TPS65912
+ depends on SPI_MASTER && GPIOLIB
+ help
+ If you say yes here you get support for the TPS65912 series of
+ PM chips with SPI interface.
+
config MENELAUS
bool "Texas Instruments TWL92330/Menelaus PM chip"
depends on I2C=y && ARCH_OMAP2
@@ -662,8 +693,9 @@ config MFD_JANZ_CMODIO
CAN and GPIO controllers.
config MFD_JZ4740_ADC
- tristate "Support for the JZ4740 SoC ADC core"
+ bool "Support for the JZ4740 SoC ADC core"
select MFD_CORE
+ select GENERIC_IRQ_CHIP
depends on MACH_JZ4740
help
Say yes here if you want support for the ADC unit in the JZ4740 SoC.
@@ -725,18 +757,19 @@ config MFD_PM8XXX_IRQ
This is required to use certain other PM 8xxx features, such as GPIO
and MPP.
-config MFD_TPS65910
- bool "TPS65910 Power Management chip"
- depends on I2C=y && GPIOLIB
- select MFD_CORE
- select GPIO_TPS65910
- help
- if you say yes here you get support for the TPS65910 series of
- Power Management chips.
-
config TPS65911_COMPARATOR
tristate
+config MFD_AAT2870_CORE
+ bool "Support for the AnalogicTech AAT2870"
+ select MFD_CORE
+ depends on I2C=y && GPIOLIB
+ help
+ If you say yes here you get support for the AAT2870.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
endif # MFD_SUPPORT
menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 22a280f..c580203 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o tmio_core.o
obj-$(CONFIG_MFD_WM8400) += wm8400-core.o
wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o
+wm831x-objs += wm831x-auxadc.o
obj-$(CONFIG_MFD_WM831X) += wm831x.o
obj-$(CONFIG_MFD_WM831X_I2C) += wm831x-i2c.o
obj-$(CONFIG_MFD_WM831X_SPI) += wm831x-spi.o
@@ -35,6 +36,11 @@ obj-$(CONFIG_MFD_WM8994) += wm8994-core.o wm8994-irq.o
obj-$(CONFIG_TPS6105X) += tps6105x.o
obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_TPS6507X) += tps6507x.o
+obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-irq.o
+tps65912-objs := tps65912-core.o tps65912-irq.o
+obj-$(CONFIG_MFD_TPS65912) += tps65912.o
+obj-$(CONFIG_MFD_TPS65912_I2C) += tps65912-i2c.o
+obj-$(CONFIG_MFD_TPS65912_SPI) += tps65912-spi.o
obj-$(CONFIG_MENELAUS) += menelaus.o
obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o
@@ -94,5 +100,5 @@ obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o
obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
-obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-irq.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
+obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
new file mode 100644
index 0000000..345dc65
--- /dev/null
+++ b/drivers/mfd/aat2870-core.c
@@ -0,0 +1,535 @@
+/*
+ * linux/drivers/mfd/aat2870-core.c
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <jinyoungp@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/aat2870.h>
+#include <linux/regulator/machine.h>
+
+static struct aat2870_register aat2870_regs[AAT2870_REG_NUM] = {
+ /* readable, writeable, value */
+ { 0, 1, 0x00 }, /* 0x00 AAT2870_BL_CH_EN */
+ { 0, 1, 0x16 }, /* 0x01 AAT2870_BLM */
+ { 0, 1, 0x16 }, /* 0x02 AAT2870_BLS */
+ { 0, 1, 0x56 }, /* 0x03 AAT2870_BL1 */
+ { 0, 1, 0x56 }, /* 0x04 AAT2870_BL2 */
+ { 0, 1, 0x56 }, /* 0x05 AAT2870_BL3 */
+ { 0, 1, 0x56 }, /* 0x06 AAT2870_BL4 */
+ { 0, 1, 0x56 }, /* 0x07 AAT2870_BL5 */
+ { 0, 1, 0x56 }, /* 0x08 AAT2870_BL6 */
+ { 0, 1, 0x56 }, /* 0x09 AAT2870_BL7 */
+ { 0, 1, 0x56 }, /* 0x0A AAT2870_BL8 */
+ { 0, 1, 0x00 }, /* 0x0B AAT2870_FLR */
+ { 0, 1, 0x03 }, /* 0x0C AAT2870_FM */
+ { 0, 1, 0x03 }, /* 0x0D AAT2870_FS */
+ { 0, 1, 0x10 }, /* 0x0E AAT2870_ALS_CFG0 */
+ { 0, 1, 0x06 }, /* 0x0F AAT2870_ALS_CFG1 */
+ { 0, 1, 0x00 }, /* 0x10 AAT2870_ALS_CFG2 */
+ { 1, 0, 0x00 }, /* 0x11 AAT2870_AMB */
+ { 0, 1, 0x00 }, /* 0x12 AAT2870_ALS0 */
+ { 0, 1, 0x00 }, /* 0x13 AAT2870_ALS1 */
+ { 0, 1, 0x00 }, /* 0x14 AAT2870_ALS2 */
+ { 0, 1, 0x00 }, /* 0x15 AAT2870_ALS3 */
+ { 0, 1, 0x00 }, /* 0x16 AAT2870_ALS4 */
+ { 0, 1, 0x00 }, /* 0x17 AAT2870_ALS5 */
+ { 0, 1, 0x00 }, /* 0x18 AAT2870_ALS6 */
+ { 0, 1, 0x00 }, /* 0x19 AAT2870_ALS7 */
+ { 0, 1, 0x00 }, /* 0x1A AAT2870_ALS8 */
+ { 0, 1, 0x00 }, /* 0x1B AAT2870_ALS9 */
+ { 0, 1, 0x00 }, /* 0x1C AAT2870_ALSA */
+ { 0, 1, 0x00 }, /* 0x1D AAT2870_ALSB */
+ { 0, 1, 0x00 }, /* 0x1E AAT2870_ALSC */
+ { 0, 1, 0x00 }, /* 0x1F AAT2870_ALSD */
+ { 0, 1, 0x00 }, /* 0x20 AAT2870_ALSE */
+ { 0, 1, 0x00 }, /* 0x21 AAT2870_ALSF */
+ { 0, 1, 0x00 }, /* 0x22 AAT2870_SUB_SET */
+ { 0, 1, 0x00 }, /* 0x23 AAT2870_SUB_CTRL */
+ { 0, 1, 0x00 }, /* 0x24 AAT2870_LDO_AB */
+ { 0, 1, 0x00 }, /* 0x25 AAT2870_LDO_CD */
+ { 0, 1, 0x00 }, /* 0x26 AAT2870_LDO_EN */
+};
+
+static struct mfd_cell aat2870_devs[] = {
+ {
+ .name = "aat2870-backlight",
+ .id = AAT2870_ID_BL,
+ .pdata_size = sizeof(struct aat2870_bl_platform_data),
+ },
+ {
+ .name = "aat2870-regulator",
+ .id = AAT2870_ID_LDOA,
+ .pdata_size = sizeof(struct regulator_init_data),
+ },
+ {
+ .name = "aat2870-regulator",
+ .id = AAT2870_ID_LDOB,
+ .pdata_size = sizeof(struct regulator_init_data),
+ },
+ {
+ .name = "aat2870-regulator",
+ .id = AAT2870_ID_LDOC,
+ .pdata_size = sizeof(struct regulator_init_data),
+ },
+ {
+ .name = "aat2870-regulator",
+ .id = AAT2870_ID_LDOD,
+ .pdata_size = sizeof(struct regulator_init_data),
+ },
+};
+
+static int __aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val)
+{
+ int ret;
+
+ if (addr >= AAT2870_REG_NUM) {
+ dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr);
+ return -EINVAL;
+ }
+
+ if (!aat2870->reg_cache[addr].readable) {
+ *val = aat2870->reg_cache[addr].value;
+ goto out;
+ }
+
+ ret = i2c_master_send(aat2870->client, &addr, 1);
+ if (ret < 0)
+ return ret;
+ if (ret != 1)
+ return -EIO;
+
+ ret = i2c_master_recv(aat2870->client, val, 1);
+ if (ret < 0)
+ return ret;
+ if (ret != 1)
+ return -EIO;
+
+out:
+ dev_dbg(aat2870->dev, "read: addr=0x%02x, val=0x%02x\n", addr, *val);
+ return 0;
+}
+
+static int __aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val)
+{
+ u8 msg[2];
+ int ret;
+
+ if (addr >= AAT2870_REG_NUM) {
+ dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr);
+ return -EINVAL;
+ }
+
+ if (!aat2870->reg_cache[addr].writeable) {
+ dev_err(aat2870->dev, "Address 0x%02x is not writeable\n",
+ addr);
+ return -EINVAL;
+ }
+
+ msg[0] = addr;
+ msg[1] = val;
+ ret = i2c_master_send(aat2870->client, msg, 2);
+ if (ret < 0)
+ return ret;
+ if (ret != 2)
+ return -EIO;
+
+ aat2870->reg_cache[addr].value = val;
+
+ dev_dbg(aat2870->dev, "write: addr=0x%02x, val=0x%02x\n", addr, val);
+ return 0;
+}
+
+static int aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val)
+{
+ int ret;
+
+ mutex_lock(&aat2870->io_lock);
+ ret = __aat2870_read(aat2870, addr, val);
+ mutex_unlock(&aat2870->io_lock);
+
+ return ret;
+}
+
+static int aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val)
+{
+ int ret;
+
+ mutex_lock(&aat2870->io_lock);
+ ret = __aat2870_write(aat2870, addr, val);
+ mutex_unlock(&aat2870->io_lock);
+
+ return ret;
+}
+
+static int aat2870_update(struct aat2870_data *aat2870, u8 addr, u8 mask,
+ u8 val)
+{
+ int change;
+ u8 old_val, new_val;
+ int ret;
+
+ mutex_lock(&aat2870->io_lock);
+
+ ret = __aat2870_read(aat2870, addr, &old_val);
+ if (ret)
+ goto out_unlock;
+
+ new_val = (old_val & ~mask) | (val & mask);
+ change = old_val != new_val;
+ if (change)
+ ret = __aat2870_write(aat2870, addr, new_val);
+
+out_unlock:
+ mutex_unlock(&aat2870->io_lock);
+
+ return ret;
+}
+
+static inline void aat2870_enable(struct aat2870_data *aat2870)
+{
+ if (aat2870->en_pin >= 0)
+ gpio_set_value(aat2870->en_pin, 1);
+
+ aat2870->is_enable = 1;
+}
+
+static inline void aat2870_disable(struct aat2870_data *aat2870)
+{
+ if (aat2870->en_pin >= 0)
+ gpio_set_value(aat2870->en_pin, 0);
+
+ aat2870->is_enable = 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static ssize_t aat2870_dump_reg(struct aat2870_data *aat2870, char *buf)
+{
+ u8 addr, val;
+ ssize_t count = 0;
+ int ret;
+
+ count += sprintf(buf, "aat2870 registers\n");
+ for (addr = 0; addr < AAT2870_REG_NUM; addr++) {
+ count += sprintf(buf + count, "0x%02x: ", addr);
+ if (count >= PAGE_SIZE - 1)
+ break;
+
+ ret = aat2870->read(aat2870, addr, &val);
+ if (ret == 0)
+ count += snprintf(buf + count, PAGE_SIZE - count,
+ "0x%02x", val);
+ else
+ count += snprintf(buf + count, PAGE_SIZE - count,
+ "<read fail: %d>", ret);
+
+ if (count >= PAGE_SIZE - 1)
+ break;
+
+ count += snprintf(buf + count, PAGE_SIZE - count, "\n");
+ if (count >= PAGE_SIZE - 1)
+ break;
+ }
+
+ /* Truncate count; min() would cause a warning */
+ if (count >= PAGE_SIZE)
+ count = PAGE_SIZE - 1;
+
+ return count;
+}
+
+static int aat2870_reg_open_file(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+
+ return 0;
+}
+
+static ssize_t aat2870_reg_read_file(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct aat2870_data *aat2870 = file->private_data;
+ char *buf;
+ ssize_t ret;
+
+ buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = aat2870_dump_reg(aat2870, buf);
+ if (ret >= 0)
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+ kfree(buf);
+
+ return ret;
+}
+
+static ssize_t aat2870_reg_write_file(struct file *file,
+ const char __user *user_buf, size_t count,
+ loff_t *ppos)
+{
+ struct aat2870_data *aat2870 = file->private_data;
+ char buf[32];
+ int buf_size;
+ char *start = buf;
+ unsigned long addr, val;
+ int ret;
+
+ buf_size = min(count, (sizeof(buf)-1));
+ if (copy_from_user(buf, user_buf, buf_size)) {
+ dev_err(aat2870->dev, "Failed to copy from user\n");
+ return -EFAULT;
+ }
+ buf[buf_size] = 0;
+
+ while (*start == ' ')
+ start++;
+
+ addr = simple_strtoul(start, &start, 16);
+ if (addr >= AAT2870_REG_NUM) {
+ dev_err(aat2870->dev, "Invalid address, 0x%lx\n", addr);
+ return -EINVAL;
+ }
+
+ while (*start == ' ')
+ start++;
+
+ if (strict_strtoul(start, 16, &val))
+ return -EINVAL;
+
+ ret = aat2870->write(aat2870, (u8)addr, (u8)val);
+ if (ret)
+ return ret;
+
+ return buf_size;
+}
+
+static const struct file_operations aat2870_reg_fops = {
+ .open = aat2870_reg_open_file,
+ .read = aat2870_reg_read_file,
+ .write = aat2870_reg_write_file,
+};
+
+static void aat2870_init_debugfs(struct aat2870_data *aat2870)
+{
+ aat2870->dentry_root = debugfs_create_dir("aat2870", NULL);
+ if (!aat2870->dentry_root) {
+ dev_warn(aat2870->dev,
+ "Failed to create debugfs root directory\n");
+ return;
+ }
+
+ aat2870->dentry_reg = debugfs_create_file("regs", 0644,
+ aat2870->dentry_root,
+ aat2870, &aat2870_reg_fops);
+ if (!aat2870->dentry_reg)
+ dev_warn(aat2870->dev,
+ "Failed to create debugfs register file\n");
+}
+
+static void aat2870_uninit_debugfs(struct aat2870_data *aat2870)
+{
+ debugfs_remove_recursive(aat2870->dentry_root);
+}
+#else
+static inline void aat2870_init_debugfs(struct aat2870_data *aat2870)
+{
+}
+
+static inline void aat2870_uninit_debugfs(struct aat2870_data *aat2870)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static int aat2870_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct aat2870_platform_data *pdata = client->dev.platform_data;
+ struct aat2870_data *aat2870;
+ int i, j;
+ int ret = 0;
+
+ aat2870 = kzalloc(sizeof(struct aat2870_data), GFP_KERNEL);
+ if (!aat2870) {
+ dev_err(&client->dev,
+ "Failed to allocate memory for aat2870\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ aat2870->dev = &client->dev;
+ dev_set_drvdata(aat2870->dev, aat2870);
+
+ aat2870->client = client;
+ i2c_set_clientdata(client, aat2870);
+
+ aat2870->reg_cache = aat2870_regs;
+
+ if (pdata->en_pin < 0)
+ aat2870->en_pin = -1;
+ else
+ aat2870->en_pin = pdata->en_pin;
+
+ aat2870->init = pdata->init;
+ aat2870->uninit = pdata->uninit;
+ aat2870->read = aat2870_read;
+ aat2870->write = aat2870_write;
+ aat2870->update = aat2870_update;
+
+ mutex_init(&aat2870->io_lock);
+
+ if (aat2870->init)
+ aat2870->init(aat2870);
+
+ if (aat2870->en_pin >= 0) {
+ ret = gpio_request(aat2870->en_pin, "aat2870-en");
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Failed to request GPIO %d\n", aat2870->en_pin);
+ goto out_kfree;
+ }
+ gpio_direction_output(aat2870->en_pin, 1);
+ }
+
+ aat2870_enable(aat2870);
+
+ for (i = 0; i < pdata->num_subdevs; i++) {
+ for (j = 0; j < ARRAY_SIZE(aat2870_devs); j++) {
+ if ((pdata->subdevs[i].id == aat2870_devs[j].id) &&
+ !strcmp(pdata->subdevs[i].name,
+ aat2870_devs[j].name)) {
+ aat2870_devs[j].platform_data =
+ pdata->subdevs[i].platform_data;
+ break;
+ }
+ }
+ }
+
+ ret = mfd_add_devices(aat2870->dev, 0, aat2870_devs,
+ ARRAY_SIZE(aat2870_devs), NULL, 0);
+ if (ret != 0) {
+ dev_err(aat2870->dev, "Failed to add subdev: %d\n", ret);
+ goto out_disable;
+ }
+
+ aat2870_init_debugfs(aat2870);
+
+ return 0;
+
+out_disable:
+ aat2870_disable(aat2870);
+ if (aat2870->en_pin >= 0)
+ gpio_free(aat2870->en_pin);
+out_kfree:
+ kfree(aat2870);
+out:
+ return ret;
+}
+
+static int aat2870_i2c_remove(struct i2c_client *client)
+{
+ struct aat2870_data *aat2870 = i2c_get_clientdata(client);
+
+ aat2870_uninit_debugfs(aat2870);
+
+ mfd_remove_devices(aat2870->dev);
+ aat2870_disable(aat2870);
+ if (aat2870->en_pin >= 0)
+ gpio_free(aat2870->en_pin);
+ if (aat2870->uninit)
+ aat2870->uninit(aat2870);
+ kfree(aat2870);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int aat2870_i2c_suspend(struct i2c_client *client, pm_message_t state)
+{
+ struct aat2870_data *aat2870 = i2c_get_clientdata(client);
+
+ aat2870_disable(aat2870);
+
+ return 0;
+}
+
+static int aat2870_i2c_resume(struct i2c_client *client)
+{
+ struct aat2870_data *aat2870 = i2c_get_clientdata(client);
+ struct aat2870_register *reg = NULL;
+ int i;
+
+ aat2870_enable(aat2870);
+
+ /* restore registers */
+ for (i = 0; i < AAT2870_REG_NUM; i++) {
+ reg = &aat2870->reg_cache[i];
+ if (reg->writeable)
+ aat2870->write(aat2870, i, reg->value);
+ }
+
+ return 0;
+}
+#else
+#define aat2870_i2c_suspend NULL
+#define aat2870_i2c_resume NULL
+#endif /* CONFIG_PM */
+
+static struct i2c_device_id aat2870_i2c_id_table[] = {
+ { "aat2870", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, aat2870_i2c_id_table);
+
+static struct i2c_driver aat2870_i2c_driver = {
+ .driver = {
+ .name = "aat2870",
+ .owner = THIS_MODULE,
+ },
+ .probe = aat2870_i2c_probe,
+ .remove = aat2870_i2c_remove,
+ .suspend = aat2870_i2c_suspend,
+ .resume = aat2870_i2c_resume,
+ .id_table = aat2870_i2c_id_table,
+};
+
+static int __init aat2870_init(void)
+{
+ return i2c_add_driver(&aat2870_i2c_driver);
+}
+subsys_initcall(aat2870_init);
+
+static void __exit aat2870_exit(void)
+{
+ i2c_del_driver(&aat2870_i2c_driver);
+}
+module_exit(aat2870_exit);
+
+MODULE_DESCRIPTION("Core support for the AnalogicTech AAT2870");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jin Park <jinyoungp@nvidia.com>");
diff --git a/drivers/mfd/ab3550-core.c b/drivers/mfd/ab3550-core.c
index 3d7dce6..56ba194 100644
--- a/drivers/mfd/ab3550-core.c
+++ b/drivers/mfd/ab3550-core.c
@@ -879,20 +879,13 @@ static ssize_t ab3550_bank_write(struct file *file,
size_t count, loff_t *ppos)
{
struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
- char buf[32];
- int buf_size;
unsigned long user_bank;
int err;
/* Get userspace string and assure termination */
- buf_size = min(count, (sizeof(buf) - 1));
- if (copy_from_user(buf, user_buf, buf_size))
- return -EFAULT;
- buf[buf_size] = 0;
-
- err = strict_strtoul(buf, 0, &user_bank);
+ err = kstrtoul_from_user(user_buf, count, 0, &user_bank);
if (err)
- return -EINVAL;
+ return err;
if (user_bank >= AB3550_NUM_BANKS) {
dev_err(&ab->i2c_client[0]->dev,
@@ -902,7 +895,7 @@ static ssize_t ab3550_bank_write(struct file *file,
ab->debug_bank = user_bank;
- return buf_size;
+ return count;
}
static int ab3550_address_print(struct seq_file *s, void *p)
@@ -923,27 +916,21 @@ static ssize_t ab3550_address_write(struct file *file,
size_t count, loff_t *ppos)
{
struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
- char buf[32];
- int buf_size;
unsigned long user_address;
int err;
/* Get userspace string and assure termination */
- buf_size = min(count, (sizeof(buf) - 1));
- if (copy_from_user(buf, user_buf, buf_size))
- return -EFAULT;
- buf[buf_size] = 0;
-
- err = strict_strtoul(buf, 0, &user_address);
+ err = kstrtoul_from_user(user_buf, count, 0, &user_address);
if (err)
- return -EINVAL;
+ return err;
+
if (user_address > 0xff) {
dev_err(&ab->i2c_client[0]->dev,
"debugfs error input > 0xff\n");
return -EINVAL;
}
ab->debug_address = user_address;
- return buf_size;
+ return count;
}
static int ab3550_val_print(struct seq_file *s, void *p)
@@ -971,21 +958,15 @@ static ssize_t ab3550_val_write(struct file *file,
size_t count, loff_t *ppos)
{
struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
- char buf[32];
- int buf_size;
unsigned long user_val;
int err;
u8 regvalue;
/* Get userspace string and assure termination */
- buf_size = min(count, (sizeof(buf)-1));
- if (copy_from_user(buf, user_buf, buf_size))
- return -EFAULT;
- buf[buf_size] = 0;
-
- err = strict_strtoul(buf, 0, &user_val);
+ err = kstrtoul_from_user(user_buf, count, 0, &user_val);
if (err)
- return -EINVAL;
+ return err;
+
if (user_val > 0xff) {
dev_err(&ab->i2c_client[0]->dev,
"debugfs error input > 0xff\n");
@@ -1002,7 +983,7 @@ static ssize_t ab3550_val_write(struct file *file,
if (err)
return -EINVAL;
- return buf_size;
+ return count;
}
static const struct file_operations ab3550_bank_fops = {
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index fc0c1af..387705e 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -363,7 +363,7 @@ static void ab8500_irq_remove(struct ab8500 *ab8500)
}
}
-static struct resource ab8500_gpio_resources[] = {
+static struct resource __devinitdata ab8500_gpio_resources[] = {
{
.name = "GPIO_INT6",
.start = AB8500_INT_GPIO6R,
@@ -372,7 +372,7 @@ static struct resource ab8500_gpio_resources[] = {
}
};
-static struct resource ab8500_gpadc_resources[] = {
+static struct resource __devinitdata ab8500_gpadc_resources[] = {
{
.name = "HW_CONV_END",
.start = AB8500_INT_GP_HW_ADC_CONV_END,
@@ -387,7 +387,7 @@ static struct resource ab8500_gpadc_resources[] = {
},
};
-static struct resource ab8500_rtc_resources[] = {
+static struct resource __devinitdata ab8500_rtc_resources[] = {
{
.name = "60S",
.start = AB8500_INT_RTC_60S,
@@ -402,7 +402,7 @@ static struct resource ab8500_rtc_resources[] = {
},
};
-static struct resource ab8500_poweronkey_db_resources[] = {
+static struct resource __devinitdata ab8500_poweronkey_db_resources[] = {
{
.name = "ONKEY_DBF",
.start = AB8500_INT_PON_KEY1DB_F,
@@ -417,20 +417,47 @@ static struct resource ab8500_poweronkey_db_resources[] = {
},
};
-static struct resource ab8500_bm_resources[] = {
+static struct resource __devinitdata ab8500_av_acc_detect_resources[] = {
{
- .name = "MAIN_EXT_CH_NOT_OK",
- .start = AB8500_INT_MAIN_EXT_CH_NOT_OK,
- .end = AB8500_INT_MAIN_EXT_CH_NOT_OK,
- .flags = IORESOURCE_IRQ,
+ .name = "ACC_DETECT_1DB_F",
+ .start = AB8500_INT_ACC_DETECT_1DB_F,
+ .end = AB8500_INT_ACC_DETECT_1DB_F,
+ .flags = IORESOURCE_IRQ,
},
{
- .name = "BATT_OVV",
- .start = AB8500_INT_BATT_OVV,
- .end = AB8500_INT_BATT_OVV,
- .flags = IORESOURCE_IRQ,
+ .name = "ACC_DETECT_1DB_R",
+ .start = AB8500_INT_ACC_DETECT_1DB_R,
+ .end = AB8500_INT_ACC_DETECT_1DB_R,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "ACC_DETECT_21DB_F",
+ .start = AB8500_INT_ACC_DETECT_21DB_F,
+ .end = AB8500_INT_ACC_DETECT_21DB_F,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "ACC_DETECT_21DB_R",
+ .start = AB8500_INT_ACC_DETECT_21DB_R,
+ .end = AB8500_INT_ACC_DETECT_21DB_R,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "ACC_DETECT_22DB_F",
+ .start = AB8500_INT_ACC_DETECT_22DB_F,
+ .end = AB8500_INT_ACC_DETECT_22DB_F,
+ .flags = IORESOURCE_IRQ,
},
{
+ .name = "ACC_DETECT_22DB_R",
+ .start = AB8500_INT_ACC_DETECT_22DB_R,
+ .end = AB8500_INT_ACC_DETECT_22DB_R,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource __devinitdata ab8500_charger_resources[] = {
+ {
.name = "MAIN_CH_UNPLUG_DET",
.start = AB8500_INT_MAIN_CH_UNPLUG_DET,
.end = AB8500_INT_MAIN_CH_UNPLUG_DET,
@@ -443,27 +470,27 @@ static struct resource ab8500_bm_resources[] = {
.flags = IORESOURCE_IRQ,
},
{
- .name = "VBUS_DET_F",
- .start = AB8500_INT_VBUS_DET_F,
- .end = AB8500_INT_VBUS_DET_F,
- .flags = IORESOURCE_IRQ,
- },
- {
.name = "VBUS_DET_R",
.start = AB8500_INT_VBUS_DET_R,
.end = AB8500_INT_VBUS_DET_R,
.flags = IORESOURCE_IRQ,
},
{
- .name = "BAT_CTRL_INDB",
- .start = AB8500_INT_BAT_CTRL_INDB,
- .end = AB8500_INT_BAT_CTRL_INDB,
+ .name = "VBUS_DET_F",
+ .start = AB8500_INT_VBUS_DET_F,
+ .end = AB8500_INT_VBUS_DET_F,
.flags = IORESOURCE_IRQ,
},
{
- .name = "CH_WD_EXP",
- .start = AB8500_INT_CH_WD_EXP,
- .end = AB8500_INT_CH_WD_EXP,
+ .name = "USB_LINK_STATUS",
+ .start = AB8500_INT_USB_LINK_STATUS,
+ .end = AB8500_INT_USB_LINK_STATUS,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "USB_CHARGE_DET_DONE",
+ .start = AB8500_INT_USB_CHG_DET_DONE,
+ .end = AB8500_INT_USB_CHG_DET_DONE,
.flags = IORESOURCE_IRQ,
},
{
@@ -473,21 +500,60 @@ static struct resource ab8500_bm_resources[] = {
.flags = IORESOURCE_IRQ,
},
{
- .name = "NCONV_ACCU",
- .start = AB8500_INT_CCN_CONV_ACC,
- .end = AB8500_INT_CCN_CONV_ACC,
+ .name = "USB_CH_TH_PROT_R",
+ .start = AB8500_INT_USB_CH_TH_PROT_R,
+ .end = AB8500_INT_USB_CH_TH_PROT_R,
.flags = IORESOURCE_IRQ,
},
{
- .name = "LOW_BAT_F",
- .start = AB8500_INT_LOW_BAT_F,
- .end = AB8500_INT_LOW_BAT_F,
+ .name = "USB_CH_TH_PROT_F",
+ .start = AB8500_INT_USB_CH_TH_PROT_F,
+ .end = AB8500_INT_USB_CH_TH_PROT_F,
.flags = IORESOURCE_IRQ,
},
{
- .name = "LOW_BAT_R",
- .start = AB8500_INT_LOW_BAT_R,
- .end = AB8500_INT_LOW_BAT_R,
+ .name = "MAIN_EXT_CH_NOT_OK",
+ .start = AB8500_INT_MAIN_EXT_CH_NOT_OK,
+ .end = AB8500_INT_MAIN_EXT_CH_NOT_OK,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "MAIN_CH_TH_PROT_R",
+ .start = AB8500_INT_MAIN_CH_TH_PROT_R,
+ .end = AB8500_INT_MAIN_CH_TH_PROT_R,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "MAIN_CH_TH_PROT_F",
+ .start = AB8500_INT_MAIN_CH_TH_PROT_F,
+ .end = AB8500_INT_MAIN_CH_TH_PROT_F,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "USB_CHARGER_NOT_OKR",
+ .start = AB8500_INT_USB_CHARGER_NOT_OK,
+ .end = AB8500_INT_USB_CHARGER_NOT_OK,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "USB_CHARGER_NOT_OKF",
+ .start = AB8500_INT_USB_CHARGER_NOT_OKF,
+ .end = AB8500_INT_USB_CHARGER_NOT_OKF,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "CH_WD_EXP",
+ .start = AB8500_INT_CH_WD_EXP,
+ .end = AB8500_INT_CH_WD_EXP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource __devinitdata ab8500_btemp_resources[] = {
+ {
+ .name = "BAT_CTRL_INDB",
+ .start = AB8500_INT_BAT_CTRL_INDB,
+ .end = AB8500_INT_BAT_CTRL_INDB,
.flags = IORESOURCE_IRQ,
},
{
@@ -503,38 +569,55 @@ static struct resource ab8500_bm_resources[] = {
.flags = IORESOURCE_IRQ,
},
{
- .name = "USB_CHARGER_NOT_OKR",
- .start = AB8500_INT_USB_CHARGER_NOT_OK,
- .end = AB8500_INT_USB_CHARGER_NOT_OK,
+ .name = "BTEMP_LOW_MEDIUM",
+ .start = AB8500_INT_BTEMP_LOW_MEDIUM,
+ .end = AB8500_INT_BTEMP_LOW_MEDIUM,
.flags = IORESOURCE_IRQ,
},
{
- .name = "USB_CHARGE_DET_DONE",
- .start = AB8500_INT_USB_CHG_DET_DONE,
- .end = AB8500_INT_USB_CHG_DET_DONE,
+ .name = "BTEMP_MEDIUM_HIGH",
+ .start = AB8500_INT_BTEMP_MEDIUM_HIGH,
+ .end = AB8500_INT_BTEMP_MEDIUM_HIGH,
.flags = IORESOURCE_IRQ,
},
+};
+
+static struct resource __devinitdata ab8500_fg_resources[] = {
{
- .name = "USB_CH_TH_PROT_R",
- .start = AB8500_INT_USB_CH_TH_PROT_R,
- .end = AB8500_INT_USB_CH_TH_PROT_R,
+ .name = "NCONV_ACCU",
+ .start = AB8500_INT_CCN_CONV_ACC,
+ .end = AB8500_INT_CCN_CONV_ACC,
.flags = IORESOURCE_IRQ,
},
{
- .name = "MAIN_CH_TH_PROT_R",
- .start = AB8500_INT_MAIN_CH_TH_PROT_R,
- .end = AB8500_INT_MAIN_CH_TH_PROT_R,
+ .name = "BATT_OVV",
+ .start = AB8500_INT_BATT_OVV,
+ .end = AB8500_INT_BATT_OVV,
.flags = IORESOURCE_IRQ,
},
{
- .name = "USB_CHARGER_NOT_OKF",
- .start = AB8500_INT_USB_CHARGER_NOT_OKF,
- .end = AB8500_INT_USB_CHARGER_NOT_OKF,
+ .name = "LOW_BAT_F",
+ .start = AB8500_INT_LOW_BAT_F,
+ .end = AB8500_INT_LOW_BAT_F,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "LOW_BAT_R",
+ .start = AB8500_INT_LOW_BAT_R,
+ .end = AB8500_INT_LOW_BAT_R,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "CC_INT_CALIB",
+ .start = AB8500_INT_CC_INT_CALIB,
+ .end = AB8500_INT_CC_INT_CALIB,
.flags = IORESOURCE_IRQ,
},
};
-static struct resource ab8500_debug_resources[] = {
+static struct resource __devinitdata ab8500_chargalg_resources[] = {};
+
+static struct resource __devinitdata ab8500_debug_resources[] = {
{
.name = "IRQ_FIRST",
.start = AB8500_INT_MAIN_EXT_CH_NOT_OK,
@@ -549,7 +632,7 @@ static struct resource ab8500_debug_resources[] = {
},
};
-static struct resource ab8500_usb_resources[] = {
+static struct resource __devinitdata ab8500_usb_resources[] = {
{
.name = "ID_WAKEUP_R",
.start = AB8500_INT_ID_WAKEUP_R,
@@ -580,9 +663,21 @@ static struct resource ab8500_usb_resources[] = {
.end = AB8500_INT_USB_LINK_STATUS,
.flags = IORESOURCE_IRQ,
},
+ {
+ .name = "USB_ADP_PROBE_PLUG",
+ .start = AB8500_INT_ADP_PROBE_PLUG,
+ .end = AB8500_INT_ADP_PROBE_PLUG,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "USB_ADP_PROBE_UNPLUG",
+ .start = AB8500_INT_ADP_PROBE_UNPLUG,
+ .end = AB8500_INT_ADP_PROBE_UNPLUG,
+ .flags = IORESOURCE_IRQ,
+ },
};
-static struct resource ab8500_temp_resources[] = {
+static struct resource __devinitdata ab8500_temp_resources[] = {
{
.name = "AB8500_TEMP_WARM",
.start = AB8500_INT_TEMP_WARM,
@@ -591,7 +686,7 @@ static struct resource ab8500_temp_resources[] = {
},
};
-static struct mfd_cell ab8500_devs[] = {
+static struct mfd_cell __devinitdata ab8500_devs[] = {
#ifdef CONFIG_DEBUG_FS
{
.name = "ab8500-debug",
@@ -621,11 +716,33 @@ static struct mfd_cell ab8500_devs[] = {
.resources = ab8500_rtc_resources,
},
{
- .name = "ab8500-bm",
- .num_resources = ARRAY_SIZE(ab8500_bm_resources),
- .resources = ab8500_bm_resources,
+ .name = "ab8500-charger",
+ .num_resources = ARRAY_SIZE(ab8500_charger_resources),
+ .resources = ab8500_charger_resources,
+ },
+ {
+ .name = "ab8500-btemp",
+ .num_resources = ARRAY_SIZE(ab8500_btemp_resources),
+ .resources = ab8500_btemp_resources,
+ },
+ {
+ .name = "ab8500-fg",
+ .num_resources = ARRAY_SIZE(ab8500_fg_resources),
+ .resources = ab8500_fg_resources,
+ },
+ {
+ .name = "ab8500-chargalg",
+ .num_resources = ARRAY_SIZE(ab8500_chargalg_resources),
+ .resources = ab8500_chargalg_resources,
+ },
+ {
+ .name = "ab8500-acc-det",
+ .num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources),
+ .resources = ab8500_av_acc_detect_resources,
+ },
+ {
+ .name = "ab8500-codec",
},
- { .name = "ab8500-codec", },
{
.name = "ab8500-usb",
.num_resources = ARRAY_SIZE(ab8500_usb_resources),
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index 64748e4..64bdeeb 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -419,20 +419,13 @@ static ssize_t ab8500_bank_write(struct file *file,
size_t count, loff_t *ppos)
{
struct device *dev = ((struct seq_file *)(file->private_data))->private;
- char buf[32];
- int buf_size;
unsigned long user_bank;
int err;
/* Get userspace string and assure termination */
- buf_size = min(count, (sizeof(buf) - 1));
- if (copy_from_user(buf, user_buf, buf_size))
- return -EFAULT;
- buf[buf_size] = 0;
-
- err = strict_strtoul(buf, 0, &user_bank);
+ err = kstrtoul_from_user(user_buf, count, 0, &user_bank);
if (err)
- return -EINVAL;
+ return err;
if (user_bank >= AB8500_NUM_BANKS) {
dev_err(dev, "debugfs error input > number of banks\n");
@@ -441,7 +434,7 @@ static ssize_t ab8500_bank_write(struct file *file,
debug_bank = user_bank;
- return buf_size;
+ return count;
}
static int ab8500_address_print(struct seq_file *s, void *p)
@@ -459,26 +452,20 @@ static ssize_t ab8500_address_write(struct file *file,
size_t count, loff_t *ppos)
{
struct device *dev = ((struct seq_file *)(file->private_data))->private;
- char buf[32];
- int buf_size;
unsigned long user_address;
int err;
/* Get userspace string and assure termination */
- buf_size = min(count, (sizeof(buf) - 1));
- if (copy_from_user(buf, user_buf, buf_size))
- return -EFAULT;
- buf[buf_size] = 0;
-
- err = strict_strtoul(buf, 0, &user_address);
+ err = kstrtoul_from_user(user_buf, count, 0, &user_address);
if (err)
- return -EINVAL;
+ return err;
+
if (user_address > 0xff) {
dev_err(dev, "debugfs error input > 0xff\n");
return -EINVAL;
}
debug_address = user_address;
- return buf_size;
+ return count;
}
static int ab8500_val_print(struct seq_file *s, void *p)
@@ -509,20 +496,14 @@ static ssize_t ab8500_val_write(struct file *file,
size_t count, loff_t *ppos)
{
struct device *dev = ((struct seq_file *)(file->private_data))->private;
- char buf[32];
- int buf_size;
unsigned long user_val;
int err;
/* Get userspace string and assure termination */
- buf_size = min(count, (sizeof(buf)-1));
- if (copy_from_user(buf, user_buf, buf_size))
- return -EFAULT;
- buf[buf_size] = 0;
-
- err = strict_strtoul(buf, 0, &user_val);
+ err = kstrtoul_from_user(user_buf, count, 0, &user_val);
if (err)
- return -EINVAL;
+ return err;
+
if (user_val > 0xff) {
dev_err(dev, "debugfs error input > 0xff\n");
return -EINVAL;
@@ -534,7 +515,7 @@ static ssize_t ab8500_val_write(struct file *file,
return -EINVAL;
}
- return buf_size;
+ return count;
}
static const struct file_operations ab8500_bank_fops = {
diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c
index a0bd0cf..21131c7 100644
--- a/drivers/mfd/jz4740-adc.c
+++ b/drivers/mfd/jz4740-adc.c
@@ -56,7 +56,7 @@ struct jz4740_adc {
void __iomem *base;
int irq;
- int irq_base;
+ struct irq_chip_generic *gc;
struct clk *clk;
atomic_t clk_ref;
@@ -64,63 +64,17 @@ struct jz4740_adc {
spinlock_t lock;
};
-static inline void jz4740_adc_irq_set_masked(struct jz4740_adc *adc, int irq,
- bool masked)
-{
- unsigned long flags;
- uint8_t val;
-
- irq -= adc->irq_base;
-
- spin_lock_irqsave(&adc->lock, flags);
-
- val = readb(adc->base + JZ_REG_ADC_CTRL);
- if (masked)
- val |= BIT(irq);
- else
- val &= ~BIT(irq);
- writeb(val, adc->base + JZ_REG_ADC_CTRL);
-
- spin_unlock_irqrestore(&adc->lock, flags);
-}
-
-static void jz4740_adc_irq_mask(struct irq_data *data)
-{
- struct jz4740_adc *adc = irq_data_get_irq_chip_data(data);
- jz4740_adc_irq_set_masked(adc, data->irq, true);
-}
-
-static void jz4740_adc_irq_unmask(struct irq_data *data)
-{
- struct jz4740_adc *adc = irq_data_get_irq_chip_data(data);
- jz4740_adc_irq_set_masked(adc, data->irq, false);
-}
-
-static void jz4740_adc_irq_ack(struct irq_data *data)
-{
- struct jz4740_adc *adc = irq_data_get_irq_chip_data(data);
- unsigned int irq = data->irq - adc->irq_base;
- writeb(BIT(irq), adc->base + JZ_REG_ADC_STATUS);
-}
-
-static struct irq_chip jz4740_adc_irq_chip = {
- .name = "jz4740-adc",
- .irq_mask = jz4740_adc_irq_mask,
- .irq_unmask = jz4740_adc_irq_unmask,
- .irq_ack = jz4740_adc_irq_ack,
-};
-
static void jz4740_adc_irq_demux(unsigned int irq, struct irq_desc *desc)
{
- struct jz4740_adc *adc = irq_desc_get_handler_data(desc);
+ struct irq_chip_generic *gc = irq_desc_get_handler_data(desc);
uint8_t status;
unsigned int i;
- status = readb(adc->base + JZ_REG_ADC_STATUS);
+ status = readb(gc->reg_base + JZ_REG_ADC_STATUS);
for (i = 0; i < 5; ++i) {
if (status & BIT(i))
- generic_handle_irq(adc->irq_base + i);
+ generic_handle_irq(gc->irq_base + i);
}
}
@@ -249,10 +203,12 @@ const struct mfd_cell jz4740_adc_cells[] = {
static int __devinit jz4740_adc_probe(struct platform_device *pdev)
{
- int ret;
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
struct jz4740_adc *adc;
struct resource *mem_base;
- int irq;
+ int ret;
+ int irq_base;
adc = kmalloc(sizeof(*adc), GFP_KERNEL);
if (!adc) {
@@ -267,9 +223,9 @@ static int __devinit jz4740_adc_probe(struct platform_device *pdev)
goto err_free;
}
- adc->irq_base = platform_get_irq(pdev, 1);
- if (adc->irq_base < 0) {
- ret = adc->irq_base;
+ irq_base = platform_get_irq(pdev, 1);
+ if (irq_base < 0) {
+ ret = irq_base;
dev_err(&pdev->dev, "Failed to get irq base: %d\n", ret);
goto err_free;
}
@@ -309,20 +265,28 @@ static int __devinit jz4740_adc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, adc);
- for (irq = adc->irq_base; irq < adc->irq_base + 5; ++irq) {
- irq_set_chip_data(irq, adc);
- irq_set_chip_and_handler(irq, &jz4740_adc_irq_chip,
- handle_level_irq);
- }
+ gc = irq_alloc_generic_chip("INTC", 1, irq_base, adc->base,
+ handle_level_irq);
+
+ ct = gc->chip_types;
+ ct->regs.mask = JZ_REG_ADC_CTRL;
+ ct->regs.ack = JZ_REG_ADC_STATUS;
+ ct->chip.irq_mask = irq_gc_mask_set_bit;
+ ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+ ct->chip.irq_ack = irq_gc_ack;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(5), 0, 0, IRQ_NOPROBE | IRQ_LEVEL);
+
+ adc->gc = gc;
- irq_set_handler_data(adc->irq, adc);
+ irq_set_handler_data(adc->irq, gc);
irq_set_chained_handler(adc->irq, jz4740_adc_irq_demux);
writeb(0x00, adc->base + JZ_REG_ADC_ENABLE);
writeb(0xff, adc->base + JZ_REG_ADC_CTRL);
ret = mfd_add_devices(&pdev->dev, 0, jz4740_adc_cells,
- ARRAY_SIZE(jz4740_adc_cells), mem_base, adc->irq_base);
+ ARRAY_SIZE(jz4740_adc_cells), mem_base, irq_base);
if (ret < 0)
goto err_clk_put;
@@ -347,6 +311,8 @@ static int __devexit jz4740_adc_remove(struct platform_device *pdev)
mfd_remove_devices(&pdev->dev);
+ irq_remove_generic_chip(adc->gc, IRQ_MSK(5), IRQ_NOPROBE | IRQ_LEVEL, 0);
+ kfree(adc->gc);
irq_set_handler_data(adc->irq, NULL);
irq_set_chained_handler(adc->irq, NULL);
diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c
index ea3f52c..ea1169b 100644
--- a/drivers/mfd/lpc_sch.c
+++ b/drivers/mfd/lpc_sch.c
@@ -37,6 +37,9 @@
#define GPIOBASE 0x44
#define GPIO_IO_SIZE 64
+#define WDTBASE 0x84
+#define WDT_IO_SIZE 64
+
static struct resource smbus_sch_resource = {
.flags = IORESOURCE_IO,
};
@@ -59,6 +62,18 @@ static struct mfd_cell lpc_sch_cells[] = {
},
};
+static struct resource wdt_sch_resource = {
+ .flags = IORESOURCE_IO,
+};
+
+static struct mfd_cell tunnelcreek_cells[] = {
+ {
+ .name = "tunnelcreek_wdt",
+ .num_resources = 1,
+ .resources = &wdt_sch_resource,
+ },
+};
+
static struct pci_device_id lpc_sch_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ITC_LPC) },
@@ -72,6 +87,7 @@ static int __devinit lpc_sch_probe(struct pci_dev *dev,
unsigned int base_addr_cfg;
unsigned short base_addr;
int i;
+ int ret;
pci_read_config_dword(dev, SMBASE, &base_addr_cfg);
if (!(base_addr_cfg & (1 << 31))) {
@@ -104,8 +120,39 @@ static int __devinit lpc_sch_probe(struct pci_dev *dev,
for (i=0; i < ARRAY_SIZE(lpc_sch_cells); i++)
lpc_sch_cells[i].id = id->device;
- return mfd_add_devices(&dev->dev, 0,
+ ret = mfd_add_devices(&dev->dev, 0,
lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL, 0);
+ if (ret)
+ goto out_dev;
+
+ if (id->device == PCI_DEVICE_ID_INTEL_ITC_LPC) {
+ pci_read_config_dword(dev, WDTBASE, &base_addr_cfg);
+ if (!(base_addr_cfg & (1 << 31))) {
+ dev_err(&dev->dev, "Decode of the WDT I/O range disabled\n");
+ ret = -ENODEV;
+ goto out_dev;
+ }
+ base_addr = (unsigned short)base_addr_cfg;
+ if (base_addr == 0) {
+ dev_err(&dev->dev, "I/O space for WDT uninitialized\n");
+ ret = -ENODEV;
+ goto out_dev;
+ }
+
+ wdt_sch_resource.start = base_addr;
+ wdt_sch_resource.end = base_addr + WDT_IO_SIZE - 1;
+
+ for (i = 0; i < ARRAY_SIZE(tunnelcreek_cells); i++)
+ tunnelcreek_cells[i].id = id->device;
+
+ ret = mfd_add_devices(&dev->dev, 0, tunnelcreek_cells,
+ ARRAY_SIZE(tunnelcreek_cells), NULL, 0);
+ }
+
+ return ret;
+out_dev:
+ mfd_remove_devices(&dev->dev);
+ return ret;
}
static void __devexit lpc_sch_remove(struct pci_dev *dev)
diff --git a/drivers/mfd/max8997-irq.c b/drivers/mfd/max8997-irq.c
index 638bf7e..09274cf 100644
--- a/drivers/mfd/max8997-irq.c
+++ b/drivers/mfd/max8997-irq.c
@@ -58,8 +58,6 @@ static struct i2c_client *get_i2c(struct max8997_dev *max8997,
default:
return ERR_PTR(-EINVAL);
}
-
- return ERR_PTR(-EINVAL);
}
struct max8997_irq_data {
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 1717144..29601e7 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -998,9 +998,9 @@ static void usbhs_disable(struct device *dev)
if (is_omap_usbhs_rev2(omap)) {
if (is_ehci_tll_mode(pdata->port_mode[0]))
- clk_enable(omap->usbtll_p1_fck);
+ clk_disable(omap->usbtll_p1_fck);
if (is_ehci_tll_mode(pdata->port_mode[1]))
- clk_enable(omap->usbtll_p2_fck);
+ clk_disable(omap->usbtll_p2_fck);
clk_disable(omap->utmi_p2_fck);
clk_disable(omap->utmi_p1_fck);
}
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 7ab7746..2963689c 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -228,7 +228,7 @@ int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
EXPORT_SYMBOL_GPL(stmpe_block_write);
/**
- * stmpe_set_altfunc: set the alternate function for STMPE pins
+ * stmpe_set_altfunc()- set the alternate function for STMPE pins
* @stmpe: Device to configure
* @pins: Bitmask of pins to affect
* @block: block to enable alternate functions for
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index 0dbdc4e..e4ee3895 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -42,6 +42,7 @@ struct stmpe_variant_block {
* @id_mask: bits valid in CHIPID register for comparison with id_val
* @num_gpios: number of GPIOS
* @af_bits: number of bits used to specify the alternate function
+ * @regs: variant specific registers.
* @blocks: list of blocks present on this device
* @num_blocks: number of blocks present on this device
* @num_irqs: number of internal IRQs available on this device
diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index 2229e66..6f5b8cf 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -147,12 +147,11 @@ static int tps65910_i2c_probe(struct i2c_client *i2c,
if (init_data == NULL)
return -ENOMEM;
- init_data->irq = pmic_plat_data->irq;
- init_data->irq_base = pmic_plat_data->irq;
-
tps65910 = kzalloc(sizeof(struct tps65910), GFP_KERNEL);
- if (tps65910 == NULL)
+ if (tps65910 == NULL) {
+ kfree(init_data);
return -ENOMEM;
+ }
i2c_set_clientdata(i2c, tps65910);
tps65910->dev = &i2c->dev;
@@ -168,17 +167,22 @@ static int tps65910_i2c_probe(struct i2c_client *i2c,
if (ret < 0)
goto err;
+ init_data->irq = pmic_plat_data->irq;
+ init_data->irq_base = pmic_plat_data->irq;
+
tps65910_gpio_init(tps65910, pmic_plat_data->gpio_base);
ret = tps65910_irq_init(tps65910, init_data->irq, init_data);
if (ret < 0)
goto err;
+ kfree(init_data);
return ret;
err:
mfd_remove_devices(tps65910->dev);
kfree(tps65910);
+ kfree(init_data);
return ret;
}
@@ -187,6 +191,7 @@ static int tps65910_i2c_remove(struct i2c_client *i2c)
struct tps65910 *tps65910 = i2c_get_clientdata(i2c);
mfd_remove_devices(tps65910->dev);
+ tps65910_irq_exit(tps65910);
kfree(tps65910);
return 0;
diff --git a/drivers/mfd/tps65911-comparator.c b/drivers/mfd/tps65911-comparator.c
index 283ac67..e7ff783 100644
--- a/drivers/mfd/tps65911-comparator.c
+++ b/drivers/mfd/tps65911-comparator.c
@@ -157,6 +157,8 @@ static __devexit int tps65911_comparator_remove(struct platform_device *pdev)
struct tps65910 *tps65910;
tps65910 = dev_get_drvdata(pdev->dev.parent);
+ device_remove_file(&pdev->dev, &dev_attr_comp2_threshold);
+ device_remove_file(&pdev->dev, &dev_attr_comp1_threshold);
return 0;
}
diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c
new file mode 100644
index 0000000..955bc00
--- /dev/null
+++ b/drivers/mfd/tps65912-core.c
@@ -0,0 +1,177 @@
+/*
+ * tps65912-core.c -- TI TPS65912x
+ *
+ * Copyright 2011 Texas Instruments Inc.
+ *
+ * Author: Margarita Olaya Cabrera <magi@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This driver is based on wm8350 implementation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps65912.h>
+
+static struct mfd_cell tps65912s[] = {
+ {
+ .name = "tps65912-pmic",
+ },
+};
+
+int tps65912_set_bits(struct tps65912 *tps65912, u8 reg, u8 mask)
+{
+ u8 data;
+ int err;
+
+ mutex_lock(&tps65912->io_mutex);
+
+ err = tps65912->read(tps65912, reg, 1, &data);
+ if (err) {
+ dev_err(tps65912->dev, "Read from reg 0x%x failed\n", reg);
+ goto out;
+ }
+
+ data |= mask;
+ err = tps65912->write(tps65912, reg, 1, &data);
+ if (err)
+ dev_err(tps65912->dev, "Write to reg 0x%x failed\n", reg);
+
+out:
+ mutex_unlock(&tps65912->io_mutex);
+ return err;
+}
+EXPORT_SYMBOL_GPL(tps65912_set_bits);
+
+int tps65912_clear_bits(struct tps65912 *tps65912, u8 reg, u8 mask)
+{
+ u8 data;
+ int err;
+
+ mutex_lock(&tps65912->io_mutex);
+ err = tps65912->read(tps65912, reg, 1, &data);
+ if (err) {
+ dev_err(tps65912->dev, "Read from reg 0x%x failed\n", reg);
+ goto out;
+ }
+
+ data &= ~mask;
+ err = tps65912->write(tps65912, reg, 1, &data);
+ if (err)
+ dev_err(tps65912->dev, "Write to reg 0x%x failed\n", reg);
+
+out:
+ mutex_unlock(&tps65912->io_mutex);
+ return err;
+}
+EXPORT_SYMBOL_GPL(tps65912_clear_bits);
+
+static inline int tps65912_read(struct tps65912 *tps65912, u8 reg)
+{
+ u8 val;
+ int err;
+
+ err = tps65912->read(tps65912, reg, 1, &val);
+ if (err < 0)
+ return err;
+
+ return val;
+}
+
+static inline int tps65912_write(struct tps65912 *tps65912, u8 reg, u8 val)
+{
+ return tps65912->write(tps65912, reg, 1, &val);
+}
+
+int tps65912_reg_read(struct tps65912 *tps65912, u8 reg)
+{
+ int data;
+
+ mutex_lock(&tps65912->io_mutex);
+
+ data = tps65912_read(tps65912, reg);
+ if (data < 0)
+ dev_err(tps65912->dev, "Read from reg 0x%x failed\n", reg);
+
+ mutex_unlock(&tps65912->io_mutex);
+ return data;
+}
+EXPORT_SYMBOL_GPL(tps65912_reg_read);
+
+int tps65912_reg_write(struct tps65912 *tps65912, u8 reg, u8 val)
+{
+ int err;
+
+ mutex_lock(&tps65912->io_mutex);
+
+ err = tps65912_write(tps65912, reg, val);
+ if (err < 0)
+ dev_err(tps65912->dev, "Write for reg 0x%x failed\n", reg);
+
+ mutex_unlock(&tps65912->io_mutex);
+ return err;
+}
+EXPORT_SYMBOL_GPL(tps65912_reg_write);
+
+int tps65912_device_init(struct tps65912 *tps65912)
+{
+ struct tps65912_board *pmic_plat_data = tps65912->dev->platform_data;
+ struct tps65912_platform_data *init_data;
+ int ret, dcdc_avs, value;
+
+ init_data = kzalloc(sizeof(struct tps65912_platform_data), GFP_KERNEL);
+ if (init_data == NULL)
+ return -ENOMEM;
+
+ init_data->irq = pmic_plat_data->irq;
+ init_data->irq_base = pmic_plat_data->irq;
+
+ mutex_init(&tps65912->io_mutex);
+ dev_set_drvdata(tps65912->dev, tps65912);
+
+ dcdc_avs = (pmic_plat_data->is_dcdc1_avs << 0 |
+ pmic_plat_data->is_dcdc2_avs << 1 |
+ pmic_plat_data->is_dcdc3_avs << 2 |
+ pmic_plat_data->is_dcdc4_avs << 3);
+ if (dcdc_avs) {
+ tps65912->read(tps65912, TPS65912_I2C_SPI_CFG, 1, &value);
+ dcdc_avs |= value;
+ tps65912->write(tps65912, TPS65912_I2C_SPI_CFG, 1, &dcdc_avs);
+ }
+
+ ret = mfd_add_devices(tps65912->dev, -1,
+ tps65912s, ARRAY_SIZE(tps65912s),
+ NULL, 0);
+ if (ret < 0)
+ goto err;
+
+ ret = tps65912_irq_init(tps65912, init_data->irq, init_data);
+ if (ret < 0)
+ goto err;
+
+ return ret;
+
+err:
+ kfree(init_data);
+ mfd_remove_devices(tps65912->dev);
+ kfree(tps65912);
+ return ret;
+}
+
+void tps65912_device_exit(struct tps65912 *tps65912)
+{
+ mfd_remove_devices(tps65912->dev);
+ kfree(tps65912);
+}
+
+MODULE_AUTHOR("Margarita Olaya <magi@slimlogic.co.uk>");
+MODULE_DESCRIPTION("TPS65912x chip family multi-function driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/tps65912-i2c.c b/drivers/mfd/tps65912-i2c.c
new file mode 100644
index 0000000..c041f2c
--- /dev/null
+++ b/drivers/mfd/tps65912-i2c.c
@@ -0,0 +1,139 @@
+/*
+ * tps65912-i2c.c -- I2C access for TI TPS65912x PMIC
+ *
+ * Copyright 2011 Texas Instruments Inc.
+ *
+ * Author: Margarita Olaya Cabrera <magi@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This driver is based on wm8350 implementation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps65912.h>
+
+static int tps65912_i2c_read(struct tps65912 *tps65912, u8 reg,
+ int bytes, void *dest)
+{
+ struct i2c_client *i2c = tps65912->control_data;
+ struct i2c_msg xfer[2];
+ int ret;
+
+ /* Write register */
+ xfer[0].addr = i2c->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = 1;
+ xfer[0].buf = &reg;
+
+ /* Read data */
+ xfer[1].addr = i2c->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = bytes;
+ xfer[1].buf = dest;
+
+ ret = i2c_transfer(i2c->adapter, xfer, 2);
+ if (ret == 2)
+ ret = 0;
+ else if (ret >= 0)
+ ret = -EIO;
+ return ret;
+}
+
+static int tps65912_i2c_write(struct tps65912 *tps65912, u8 reg,
+ int bytes, void *src)
+{
+ struct i2c_client *i2c = tps65912->control_data;
+ /* we add 1 byte for device register */
+ u8 msg[TPS6591X_MAX_REGISTER + 1];
+ int ret;
+
+ if (bytes > TPS6591X_MAX_REGISTER)
+ return -EINVAL;
+
+ msg[0] = reg;
+ memcpy(&msg[1], src, bytes);
+
+ ret = i2c_master_send(i2c, msg, bytes + 1);
+ if (ret < 0)
+ return ret;
+ if (ret != bytes + 1)
+ return -EIO;
+
+ return 0;
+}
+
+static int tps65912_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct tps65912 *tps65912;
+
+ tps65912 = kzalloc(sizeof(struct tps65912), GFP_KERNEL);
+ if (tps65912 == NULL)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, tps65912);
+ tps65912->dev = &i2c->dev;
+ tps65912->control_data = i2c;
+ tps65912->read = tps65912_i2c_read;
+ tps65912->write = tps65912_i2c_write;
+
+ return tps65912_device_init(tps65912);
+}
+
+static int tps65912_i2c_remove(struct i2c_client *i2c)
+{
+ struct tps65912 *tps65912 = i2c_get_clientdata(i2c);
+
+ tps65912_device_exit(tps65912);
+
+ return 0;
+}
+
+static const struct i2c_device_id tps65912_i2c_id[] = {
+ {"tps65912", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tps65912_i2c_id);
+
+static struct i2c_driver tps65912_i2c_driver = {
+ .driver = {
+ .name = "tps65912",
+ .owner = THIS_MODULE,
+ },
+ .probe = tps65912_i2c_probe,
+ .remove = tps65912_i2c_remove,
+ .id_table = tps65912_i2c_id,
+};
+
+static int __init tps65912_i2c_init(void)
+{
+ int ret;
+
+ ret = i2c_add_driver(&tps65912_i2c_driver);
+ if (ret != 0)
+ pr_err("Failed to register TPS65912 I2C driver: %d\n", ret);
+
+ return ret;
+}
+/* init early so consumer devices can complete system boot */
+subsys_initcall(tps65912_i2c_init);
+
+static void __exit tps65912_i2c_exit(void)
+{
+ i2c_del_driver(&tps65912_i2c_driver);
+}
+module_exit(tps65912_i2c_exit);
+
+MODULE_AUTHOR("Margarita Olaya <magi@slimlogic.co.uk>");
+MODULE_DESCRIPTION("TPS6591x chip family multi-function driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/tps65912-irq.c b/drivers/mfd/tps65912-irq.c
new file mode 100644
index 0000000..d360a83
--- /dev/null
+++ b/drivers/mfd/tps65912-irq.c
@@ -0,0 +1,224 @@
+/*
+ * tps65912-irq.c -- TI TPS6591x
+ *
+ * Copyright 2011 Texas Instruments Inc.
+ *
+ * Author: Margarita Olaya <magi@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This driver is based on wm8350 implementation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/bug.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/mfd/tps65912.h>
+
+static inline int irq_to_tps65912_irq(struct tps65912 *tps65912,
+ int irq)
+{
+ return irq - tps65912->irq_base;
+}
+
+/*
+ * This is a threaded IRQ handler so can access I2C/SPI. Since the
+ * IRQ handler explicitly clears the IRQ it handles the IRQ line
+ * will be reasserted and the physical IRQ will be handled again if
+ * another interrupt is asserted while we run - in the normal course
+ * of events this is a rare occurrence so we save I2C/SPI reads. We're
+ * also assuming that it's rare to get lots of interrupts firing
+ * simultaneously so try to minimise I/O.
+ */
+static irqreturn_t tps65912_irq(int irq, void *irq_data)
+{
+ struct tps65912 *tps65912 = irq_data;
+ u32 irq_sts;
+ u32 irq_mask;
+ u8 reg;
+ int i;
+
+
+ tps65912->read(tps65912, TPS65912_INT_STS, 1, &reg);
+ irq_sts = reg;
+ tps65912->read(tps65912, TPS65912_INT_STS2, 1, &reg);
+ irq_sts |= reg << 8;
+ tps65912->read(tps65912, TPS65912_INT_STS3, 1, &reg);
+ irq_sts |= reg << 16;
+ tps65912->read(tps65912, TPS65912_INT_STS4, 1, &reg);
+ irq_sts |= reg << 24;
+
+ tps65912->read(tps65912, TPS65912_INT_MSK, 1, &reg);
+ irq_mask = reg;
+ tps65912->read(tps65912, TPS65912_INT_MSK2, 1, &reg);
+ irq_mask |= reg << 8;
+ tps65912->read(tps65912, TPS65912_INT_MSK3, 1, &reg);
+ irq_mask |= reg << 16;
+ tps65912->read(tps65912, TPS65912_INT_MSK4, 1, &reg);
+ irq_mask |= reg << 24;
+
+ irq_sts &= ~irq_mask;
+ if (!irq_sts)
+ return IRQ_NONE;
+
+ for (i = 0; i < tps65912->irq_num; i++) {
+ if (!(irq_sts & (1 << i)))
+ continue;
+
+ handle_nested_irq(tps65912->irq_base + i);
+ }
+
+ /* Write the STS register back to clear IRQs we handled */
+ reg = irq_sts & 0xFF;
+ irq_sts >>= 8;
+ if (reg)
+ tps65912->write(tps65912, TPS65912_INT_STS, 1, &reg);
+ reg = irq_sts & 0xFF;
+ irq_sts >>= 8;
+ if (reg)
+ tps65912->write(tps65912, TPS65912_INT_STS2, 1, &reg);
+ reg = irq_sts & 0xFF;
+ irq_sts >>= 8;
+ if (reg)
+ tps65912->write(tps65912, TPS65912_INT_STS3, 1, &reg);
+ reg = irq_sts & 0xFF;
+ if (reg)
+ tps65912->write(tps65912, TPS65912_INT_STS4, 1, &reg);
+
+ return IRQ_HANDLED;
+}
+
+static void tps65912_irq_lock(struct irq_data *data)
+{
+ struct tps65912 *tps65912 = irq_data_get_irq_chip_data(data);
+
+ mutex_lock(&tps65912->irq_lock);
+}
+
+static void tps65912_irq_sync_unlock(struct irq_data *data)
+{
+ struct tps65912 *tps65912 = irq_data_get_irq_chip_data(data);
+ u32 reg_mask;
+ u8 reg;
+
+ tps65912->read(tps65912, TPS65912_INT_MSK, 1, &reg);
+ reg_mask = reg;
+ tps65912->read(tps65912, TPS65912_INT_MSK2, 1, &reg);
+ reg_mask |= reg << 8;
+ tps65912->read(tps65912, TPS65912_INT_MSK3, 1, &reg);
+ reg_mask |= reg << 16;
+ tps65912->read(tps65912, TPS65912_INT_MSK4, 1, &reg);
+ reg_mask |= reg << 24;
+
+ if (tps65912->irq_mask != reg_mask) {
+ reg = tps65912->irq_mask & 0xFF;
+ tps65912->write(tps65912, TPS65912_INT_MSK, 1, &reg);
+ reg = tps65912->irq_mask >> 8 & 0xFF;
+ tps65912->write(tps65912, TPS65912_INT_MSK2, 1, &reg);
+ reg = tps65912->irq_mask >> 16 & 0xFF;
+ tps65912->write(tps65912, TPS65912_INT_MSK3, 1, &reg);
+ reg = tps65912->irq_mask >> 24 & 0xFF;
+ tps65912->write(tps65912, TPS65912_INT_MSK4, 1, &reg);
+ }
+
+ mutex_unlock(&tps65912->irq_lock);
+}
+
+static void tps65912_irq_enable(struct irq_data *data)
+{
+ struct tps65912 *tps65912 = irq_data_get_irq_chip_data(data);
+
+ tps65912->irq_mask &= ~(1 << irq_to_tps65912_irq(tps65912, data->irq));
+}
+
+static void tps65912_irq_disable(struct irq_data *data)
+{
+ struct tps65912 *tps65912 = irq_data_get_irq_chip_data(data);
+
+ tps65912->irq_mask |= (1 << irq_to_tps65912_irq(tps65912, data->irq));
+}
+
+static struct irq_chip tps65912_irq_chip = {
+ .name = "tps65912",
+ .irq_bus_lock = tps65912_irq_lock,
+ .irq_bus_sync_unlock = tps65912_irq_sync_unlock,
+ .irq_disable = tps65912_irq_disable,
+ .irq_enable = tps65912_irq_enable,
+};
+
+int tps65912_irq_init(struct tps65912 *tps65912, int irq,
+ struct tps65912_platform_data *pdata)
+{
+ int ret, cur_irq;
+ int flags = IRQF_ONESHOT;
+ u8 reg;
+
+ if (!irq) {
+ dev_warn(tps65912->dev, "No interrupt support, no core IRQ\n");
+ return 0;
+ }
+
+ if (!pdata || !pdata->irq_base) {
+ dev_warn(tps65912->dev, "No interrupt support, no IRQ base\n");
+ return 0;
+ }
+
+ /* Clear unattended interrupts */
+ tps65912->read(tps65912, TPS65912_INT_STS, 1, &reg);
+ tps65912->write(tps65912, TPS65912_INT_STS, 1, &reg);
+ tps65912->read(tps65912, TPS65912_INT_STS2, 1, &reg);
+ tps65912->write(tps65912, TPS65912_INT_STS2, 1, &reg);
+ tps65912->read(tps65912, TPS65912_INT_STS3, 1, &reg);
+ tps65912->write(tps65912, TPS65912_INT_STS3, 1, &reg);
+ tps65912->read(tps65912, TPS65912_INT_STS4, 1, &reg);
+ tps65912->write(tps65912, TPS65912_INT_STS4, 1, &reg);
+
+ /* Mask top level interrupts */
+ tps65912->irq_mask = 0xFFFFFFFF;
+
+ mutex_init(&tps65912->irq_lock);
+ tps65912->chip_irq = irq;
+ tps65912->irq_base = pdata->irq_base;
+
+ tps65912->irq_num = TPS65912_NUM_IRQ;
+
+ /* Register with genirq */
+ for (cur_irq = tps65912->irq_base;
+ cur_irq < tps65912->irq_num + tps65912->irq_base;
+ cur_irq++) {
+ irq_set_chip_data(cur_irq, tps65912);
+ irq_set_chip_and_handler(cur_irq, &tps65912_irq_chip,
+ handle_edge_irq);
+ irq_set_nested_thread(cur_irq, 1);
+ /* ARM needs us to explicitly flag the IRQ as valid
+ * and will set them noprobe when we do so. */
+#ifdef CONFIG_ARM
+ set_irq_flags(cur_irq, IRQF_VALID);
+#else
+ irq_set_noprobe(cur_irq);
+#endif
+ }
+
+ ret = request_threaded_irq(irq, NULL, tps65912_irq, flags,
+ "tps65912", tps65912);
+
+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
+ if (ret != 0)
+ dev_err(tps65912->dev, "Failed to request IRQ: %d\n", ret);
+
+ return ret;
+}
+
+int tps65912_irq_exit(struct tps65912 *tps65912)
+{
+ free_irq(tps65912->chip_irq, tps65912);
+ return 0;
+}
diff --git a/drivers/mfd/tps65912-spi.c b/drivers/mfd/tps65912-spi.c
new file mode 100644
index 0000000..6d71e0d
--- /dev/null
+++ b/drivers/mfd/tps65912-spi.c
@@ -0,0 +1,142 @@
+/*
+ * tps65912-spi.c -- SPI access for TI TPS65912x PMIC
+ *
+ * Copyright 2011 Texas Instruments Inc.
+ *
+ * Author: Margarita Olaya Cabrera <magi@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This driver is based on wm8350 implementation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps65912.h>
+
+static int tps65912_spi_write(struct tps65912 *tps65912, u8 addr,
+ int bytes, void *src)
+{
+ struct spi_device *spi = tps65912->control_data;
+ u8 *data = (u8 *) src;
+ int ret;
+ /* bit 23 is the read/write bit */
+ unsigned long spi_data = 1 << 23 | addr << 15 | *data;
+ struct spi_transfer xfer;
+ struct spi_message msg;
+ u32 tx_buf, rx_buf;
+
+ tx_buf = spi_data;
+ rx_buf = 0;
+
+ xfer.tx_buf = &tx_buf;
+ xfer.rx_buf = NULL;
+ xfer.len = sizeof(unsigned long);
+ xfer.bits_per_word = 24;
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfer, &msg);
+
+ ret = spi_sync(spi, &msg);
+ return ret;
+}
+
+static int tps65912_spi_read(struct tps65912 *tps65912, u8 addr,
+ int bytes, void *dest)
+{
+ struct spi_device *spi = tps65912->control_data;
+ /* bit 23 is the read/write bit */
+ unsigned long spi_data = 0 << 23 | addr << 15;
+ struct spi_transfer xfer;
+ struct spi_message msg;
+ int ret;
+ u8 *data = (u8 *) dest;
+ u32 tx_buf, rx_buf;
+
+ tx_buf = spi_data;
+ rx_buf = 0;
+
+ xfer.tx_buf = &tx_buf;
+ xfer.rx_buf = &rx_buf;
+ xfer.len = sizeof(unsigned long);
+ xfer.bits_per_word = 24;
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfer, &msg);
+
+ if (spi == NULL)
+ return 0;
+
+ ret = spi_sync(spi, &msg);
+ if (ret == 0)
+ *data = (u8) (rx_buf & 0xFF);
+ return ret;
+}
+
+static int __devinit tps65912_spi_probe(struct spi_device *spi)
+{
+ struct tps65912 *tps65912;
+
+ tps65912 = kzalloc(sizeof(struct tps65912), GFP_KERNEL);
+ if (tps65912 == NULL)
+ return -ENOMEM;
+
+ tps65912->dev = &spi->dev;
+ tps65912->control_data = spi;
+ tps65912->read = tps65912_spi_read;
+ tps65912->write = tps65912_spi_write;
+
+ spi_set_drvdata(spi, tps65912);
+
+ return tps65912_device_init(tps65912);
+}
+
+static int __devexit tps65912_spi_remove(struct spi_device *spi)
+{
+ struct tps65912 *tps65912 = spi_get_drvdata(spi);
+
+ tps65912_device_exit(tps65912);
+
+ return 0;
+}
+
+static struct spi_driver tps65912_spi_driver = {
+ .driver = {
+ .name = "tps65912",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = tps65912_spi_probe,
+ .remove = __devexit_p(tps65912_spi_remove),
+};
+
+static int __init tps65912_spi_init(void)
+{
+ int ret;
+
+ ret = spi_register_driver(&tps65912_spi_driver);
+ if (ret != 0)
+ pr_err("Failed to register TPS65912 SPI driver: %d\n", ret);
+
+ return 0;
+}
+/* init early so consumer devices can complete system boot */
+subsys_initcall(tps65912_spi_init);
+
+static void __exit tps65912_spi_exit(void)
+{
+ spi_unregister_driver(&tps65912_spi_driver);
+}
+module_exit(tps65912_spi_exit);
+
+MODULE_AUTHOR("Margarita Olaya <magi@slimlogic.co.uk>");
+MODULE_DESCRIPTION("SPI support for TPS65912 chip family mfd");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index a2eddc70..01ecfeee6 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -1283,6 +1283,8 @@ static const struct i2c_device_id twl_ids[] = {
{ "tps65950", 0 }, /* catalog version of twl5030 */
{ "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */
{ "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */
+ { "tps65921", TPS_SUBSET }, /* fewer LDOs; no codec, no LED
+ and vibrator. Charger in USB module*/
{ "twl6030", TWL6030_CLASS }, /* "Phoenix power chip" */
{ "twl6025", TWL6030_CLASS | TWL6025_SUBCLASS }, /* "Phoenix lite" */
{ /* end of list */ },
diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
index 3941ddc..b5d598c 100644
--- a/drivers/mfd/twl4030-madc.c
+++ b/drivers/mfd/twl4030-madc.c
@@ -530,13 +530,13 @@ int twl4030_madc_conversion(struct twl4030_madc_request *req)
if (ret) {
dev_err(twl4030_madc->dev,
"unable to write sel register 0x%X\n", method->sel + 1);
- return ret;
+ goto out;
}
ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, ch_lsb, method->sel);
if (ret) {
dev_err(twl4030_madc->dev,
"unable to write sel register 0x%X\n", method->sel + 1);
- return ret;
+ goto out;
}
/* Select averaging for all channels if do_avg is set */
if (req->do_avg) {
@@ -546,7 +546,7 @@ int twl4030_madc_conversion(struct twl4030_madc_request *req)
dev_err(twl4030_madc->dev,
"unable to write avg register 0x%X\n",
method->avg + 1);
- return ret;
+ goto out;
}
ret = twl_i2c_write_u8(TWL4030_MODULE_MADC,
ch_lsb, method->avg);
@@ -554,7 +554,7 @@ int twl4030_madc_conversion(struct twl4030_madc_request *req)
dev_err(twl4030_madc->dev,
"unable to write sel reg 0x%X\n",
method->sel + 1);
- return ret;
+ goto out;
}
}
if (req->type == TWL4030_MADC_IRQ_ONESHOT && req->func_cb != NULL) {
diff --git a/drivers/mfd/twl6030-pwm.c b/drivers/mfd/twl6030-pwm.c
index 5d25bdc..e8fee14 100644
--- a/drivers/mfd/twl6030-pwm.c
+++ b/drivers/mfd/twl6030-pwm.c
@@ -161,3 +161,5 @@ void pwm_free(struct pwm_device *pwm)
kfree(pwm);
}
EXPORT_SYMBOL(pwm_free);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/wm831x-auxadc.c b/drivers/mfd/wm831x-auxadc.c
new file mode 100644
index 0000000..8721095
--- /dev/null
+++ b/drivers/mfd/wm831x-auxadc.c
@@ -0,0 +1,299 @@
+/*
+ * wm831x-auxadc.c -- AUXADC for Wolfson WM831x PMICs
+ *
+ * Copyright 2009-2011 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mfd/core.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/auxadc.h>
+#include <linux/mfd/wm831x/otp.h>
+#include <linux/mfd/wm831x/regulator.h>
+
+struct wm831x_auxadc_req {
+ struct list_head list;
+ enum wm831x_auxadc input;
+ int val;
+ struct completion done;
+};
+
+static int wm831x_auxadc_read_irq(struct wm831x *wm831x,
+ enum wm831x_auxadc input)
+{
+ struct wm831x_auxadc_req *req;
+ int ret;
+ bool ena = false;
+
+ req = kzalloc(sizeof(*req), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ init_completion(&req->done);
+ req->input = input;
+ req->val = -ETIMEDOUT;
+
+ mutex_lock(&wm831x->auxadc_lock);
+
+ /* Enqueue the request */
+ list_add(&req->list, &wm831x->auxadc_pending);
+
+ ena = !wm831x->auxadc_active;
+
+ if (ena) {
+ ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
+ WM831X_AUX_ENA, WM831X_AUX_ENA);
+ if (ret != 0) {
+ dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n",
+ ret);
+ goto out;
+ }
+ }
+
+ /* Enable the conversion if not already running */
+ if (!(wm831x->auxadc_active & (1 << input))) {
+ ret = wm831x_set_bits(wm831x, WM831X_AUXADC_SOURCE,
+ 1 << input, 1 << input);
+ if (ret != 0) {
+ dev_err(wm831x->dev,
+ "Failed to set AUXADC source: %d\n", ret);
+ goto out;
+ }
+
+ wm831x->auxadc_active |= 1 << input;
+ }
+
+ /* We convert at the fastest rate possible */
+ if (ena) {
+ ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
+ WM831X_AUX_CVT_ENA |
+ WM831X_AUX_RATE_MASK,
+ WM831X_AUX_CVT_ENA |
+ WM831X_AUX_RATE_MASK);
+ if (ret != 0) {
+ dev_err(wm831x->dev, "Failed to start AUXADC: %d\n",
+ ret);
+ goto out;
+ }
+ }
+
+ mutex_unlock(&wm831x->auxadc_lock);
+
+ /* Wait for an interrupt */
+ wait_for_completion_timeout(&req->done, msecs_to_jiffies(500));
+
+ mutex_lock(&wm831x->auxadc_lock);
+
+ list_del(&req->list);
+ ret = req->val;
+
+out:
+ mutex_unlock(&wm831x->auxadc_lock);
+
+ kfree(req);
+
+ return ret;
+}
+
+static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data)
+{
+ struct wm831x *wm831x = irq_data;
+ struct wm831x_auxadc_req *req;
+ int ret, input, val;
+
+ ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
+ if (ret < 0) {
+ dev_err(wm831x->dev,
+ "Failed to read AUXADC data: %d\n", ret);
+ return IRQ_NONE;
+ }
+
+ input = ((ret & WM831X_AUX_DATA_SRC_MASK)
+ >> WM831X_AUX_DATA_SRC_SHIFT) - 1;
+
+ if (input == 14)
+ input = WM831X_AUX_CAL;
+
+ val = ret & WM831X_AUX_DATA_MASK;
+
+ mutex_lock(&wm831x->auxadc_lock);
+
+ /* Disable this conversion, we're about to complete all users */
+ wm831x_set_bits(wm831x, WM831X_AUXADC_SOURCE,
+ 1 << input, 0);
+ wm831x->auxadc_active &= ~(1 << input);
+
+ /* Turn off the entire convertor if idle */
+ if (!wm831x->auxadc_active)
+ wm831x_reg_write(wm831x, WM831X_AUXADC_CONTROL, 0);
+
+ /* Wake up any threads waiting for this request */
+ list_for_each_entry(req, &wm831x->auxadc_pending, list) {
+ if (req->input == input) {
+ req->val = val;
+ complete(&req->done);
+ }
+ }
+
+ mutex_unlock(&wm831x->auxadc_lock);
+
+ return IRQ_HANDLED;
+}
+
+static int wm831x_auxadc_read_polled(struct wm831x *wm831x,
+ enum wm831x_auxadc input)
+{
+ int ret, src, timeout;
+
+ mutex_lock(&wm831x->auxadc_lock);
+
+ ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
+ WM831X_AUX_ENA, WM831X_AUX_ENA);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret);
+ goto out;
+ }
+
+ /* We force a single source at present */
+ src = input;
+ ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE,
+ 1 << src);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret);
+ goto out;
+ }
+
+ ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
+ WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret);
+ goto disable;
+ }
+
+ /* If we're not using interrupts then poll the
+ * interrupt status register */
+ timeout = 5;
+ while (timeout) {
+ msleep(1);
+
+ ret = wm831x_reg_read(wm831x,
+ WM831X_INTERRUPT_STATUS_1);
+ if (ret < 0) {
+ dev_err(wm831x->dev,
+ "ISR 1 read failed: %d\n", ret);
+ goto disable;
+ }
+
+ /* Did it complete? */
+ if (ret & WM831X_AUXADC_DATA_EINT) {
+ wm831x_reg_write(wm831x,
+ WM831X_INTERRUPT_STATUS_1,
+ WM831X_AUXADC_DATA_EINT);
+ break;
+ } else {
+ dev_err(wm831x->dev,
+ "AUXADC conversion timeout\n");
+ ret = -EBUSY;
+ goto disable;
+ }
+ }
+
+ ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
+ if (ret < 0) {
+ dev_err(wm831x->dev,
+ "Failed to read AUXADC data: %d\n", ret);
+ goto disable;
+ }
+
+ src = ((ret & WM831X_AUX_DATA_SRC_MASK)
+ >> WM831X_AUX_DATA_SRC_SHIFT) - 1;
+
+ if (src == 14)
+ src = WM831X_AUX_CAL;
+
+ if (src != input) {
+ dev_err(wm831x->dev, "Data from source %d not %d\n",
+ src, input);
+ ret = -EINVAL;
+ } else {
+ ret &= WM831X_AUX_DATA_MASK;
+ }
+
+disable:
+ wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0);
+out:
+ mutex_unlock(&wm831x->auxadc_lock);
+ return ret;
+}
+
+/**
+ * wm831x_auxadc_read: Read a value from the WM831x AUXADC
+ *
+ * @wm831x: Device to read from.
+ * @input: AUXADC input to read.
+ */
+int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
+{
+ return wm831x->auxadc_read(wm831x, input);
+}
+EXPORT_SYMBOL_GPL(wm831x_auxadc_read);
+
+/**
+ * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC
+ *
+ * @wm831x: Device to read from.
+ * @input: AUXADC input to read.
+ */
+int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input)
+{
+ int ret;
+
+ ret = wm831x_auxadc_read(wm831x, input);
+ if (ret < 0)
+ return ret;
+
+ ret *= 1465;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv);
+
+void wm831x_auxadc_init(struct wm831x *wm831x)
+{
+ int ret;
+
+ mutex_init(&wm831x->auxadc_lock);
+ INIT_LIST_HEAD(&wm831x->auxadc_pending);
+
+ if (wm831x->irq && wm831x->irq_base) {
+ wm831x->auxadc_read = wm831x_auxadc_read_irq;
+
+ ret = request_threaded_irq(wm831x->irq_base +
+ WM831X_IRQ_AUXADC_DATA,
+ NULL, wm831x_auxadc_irq, 0,
+ "auxadc", wm831x);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "AUXADC IRQ request failed: %d\n",
+ ret);
+ wm831x->auxadc_read = NULL;
+ }
+ }
+
+ if (!wm831x->auxadc_read)
+ wm831x->auxadc_read = wm831x_auxadc_read_polled;
+}
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 265f75f..282e76a 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -295,7 +295,7 @@ int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg,
goto out;
r &= ~mask;
- r |= val;
+ r |= val & mask;
ret = wm831x_write(wm831x, reg, 2, &r);
@@ -306,146 +306,6 @@ out:
}
EXPORT_SYMBOL_GPL(wm831x_set_bits);
-/**
- * wm831x_auxadc_read: Read a value from the WM831x AUXADC
- *
- * @wm831x: Device to read from.
- * @input: AUXADC input to read.
- */
-int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
-{
- int ret, src, irq_masked, timeout;
-
- /* Are we using the interrupt? */
- irq_masked = wm831x_reg_read(wm831x, WM831X_INTERRUPT_STATUS_1_MASK);
- irq_masked &= WM831X_AUXADC_DATA_EINT;
-
- mutex_lock(&wm831x->auxadc_lock);
-
- ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
- WM831X_AUX_ENA, WM831X_AUX_ENA);
- if (ret < 0) {
- dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret);
- goto out;
- }
-
- /* We force a single source at present */
- src = input;
- ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE,
- 1 << src);
- if (ret < 0) {
- dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret);
- goto out;
- }
-
- /* Clear any notification from a very late arriving interrupt */
- try_wait_for_completion(&wm831x->auxadc_done);
-
- ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
- WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA);
- if (ret < 0) {
- dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret);
- goto disable;
- }
-
- if (irq_masked) {
- /* If we're not using interrupts then poll the
- * interrupt status register */
- timeout = 5;
- while (timeout) {
- msleep(1);
-
- ret = wm831x_reg_read(wm831x,
- WM831X_INTERRUPT_STATUS_1);
- if (ret < 0) {
- dev_err(wm831x->dev,
- "ISR 1 read failed: %d\n", ret);
- goto disable;
- }
-
- /* Did it complete? */
- if (ret & WM831X_AUXADC_DATA_EINT) {
- wm831x_reg_write(wm831x,
- WM831X_INTERRUPT_STATUS_1,
- WM831X_AUXADC_DATA_EINT);
- break;
- } else {
- dev_err(wm831x->dev,
- "AUXADC conversion timeout\n");
- ret = -EBUSY;
- goto disable;
- }
- }
- } else {
- /* If we are using interrupts then wait for the
- * interrupt to complete. Use an extremely long
- * timeout to handle situations with heavy load where
- * the notification of the interrupt may be delayed by
- * threaded IRQ handling. */
- if (!wait_for_completion_timeout(&wm831x->auxadc_done,
- msecs_to_jiffies(500))) {
- dev_err(wm831x->dev, "Timed out waiting for AUXADC\n");
- ret = -EBUSY;
- goto disable;
- }
- }
-
- ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
- if (ret < 0) {
- dev_err(wm831x->dev, "Failed to read AUXADC data: %d\n", ret);
- } else {
- src = ((ret & WM831X_AUX_DATA_SRC_MASK)
- >> WM831X_AUX_DATA_SRC_SHIFT) - 1;
-
- if (src == 14)
- src = WM831X_AUX_CAL;
-
- if (src != input) {
- dev_err(wm831x->dev, "Data from source %d not %d\n",
- src, input);
- ret = -EINVAL;
- } else {
- ret &= WM831X_AUX_DATA_MASK;
- }
- }
-
-disable:
- wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0);
-out:
- mutex_unlock(&wm831x->auxadc_lock);
- return ret;
-}
-EXPORT_SYMBOL_GPL(wm831x_auxadc_read);
-
-static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data)
-{
- struct wm831x *wm831x = irq_data;
-
- complete(&wm831x->auxadc_done);
-
- return IRQ_HANDLED;
-}
-
-/**
- * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC
- *
- * @wm831x: Device to read from.
- * @input: AUXADC input to read.
- */
-int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input)
-{
- int ret;
-
- ret = wm831x_auxadc_read(wm831x, input);
- if (ret < 0)
- return ret;
-
- ret *= 1465;
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv);
-
static struct resource wm831x_dcdc1_resources[] = {
{
.start = WM831X_DC1_CONTROL_1,
@@ -872,6 +732,9 @@ static struct mfd_cell wm8310_devs[] = {
.resources = wm831x_dcdc4_resources,
},
{
+ .name = "wm831x-clk",
+ },
+ {
.name = "wm831x-epe",
.id = 1,
},
@@ -976,11 +839,6 @@ static struct mfd_cell wm8310_devs[] = {
.resources = wm831x_power_resources,
},
{
- .name = "wm831x-rtc",
- .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
- .resources = wm831x_rtc_resources,
- },
- {
.name = "wm831x-status",
.id = 1,
.num_resources = ARRAY_SIZE(wm831x_status1_resources),
@@ -1028,6 +886,9 @@ static struct mfd_cell wm8311_devs[] = {
.resources = wm831x_dcdc4_resources,
},
{
+ .name = "wm831x-clk",
+ },
+ {
.name = "wm831x-epe",
.id = 1,
},
@@ -1108,11 +969,6 @@ static struct mfd_cell wm8311_devs[] = {
.resources = wm831x_power_resources,
},
{
- .name = "wm831x-rtc",
- .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
- .resources = wm831x_rtc_resources,
- },
- {
.name = "wm831x-status",
.id = 1,
.num_resources = ARRAY_SIZE(wm831x_status1_resources),
@@ -1125,11 +981,6 @@ static struct mfd_cell wm8311_devs[] = {
.resources = wm831x_status2_resources,
},
{
- .name = "wm831x-touch",
- .num_resources = ARRAY_SIZE(wm831x_touch_resources),
- .resources = wm831x_touch_resources,
- },
- {
.name = "wm831x-watchdog",
.num_resources = ARRAY_SIZE(wm831x_wdt_resources),
.resources = wm831x_wdt_resources,
@@ -1165,6 +1016,9 @@ static struct mfd_cell wm8312_devs[] = {
.resources = wm831x_dcdc4_resources,
},
{
+ .name = "wm831x-clk",
+ },
+ {
.name = "wm831x-epe",
.id = 1,
},
@@ -1269,11 +1123,6 @@ static struct mfd_cell wm8312_devs[] = {
.resources = wm831x_power_resources,
},
{
- .name = "wm831x-rtc",
- .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
- .resources = wm831x_rtc_resources,
- },
- {
.name = "wm831x-status",
.id = 1,
.num_resources = ARRAY_SIZE(wm831x_status1_resources),
@@ -1286,11 +1135,6 @@ static struct mfd_cell wm8312_devs[] = {
.resources = wm831x_status2_resources,
},
{
- .name = "wm831x-touch",
- .num_resources = ARRAY_SIZE(wm831x_touch_resources),
- .resources = wm831x_touch_resources,
- },
- {
.name = "wm831x-watchdog",
.num_resources = ARRAY_SIZE(wm831x_wdt_resources),
.resources = wm831x_wdt_resources,
@@ -1326,6 +1170,9 @@ static struct mfd_cell wm8320_devs[] = {
.resources = wm8320_dcdc4_buck_resources,
},
{
+ .name = "wm831x-clk",
+ },
+ {
.name = "wm831x-gpio",
.num_resources = ARRAY_SIZE(wm831x_gpio_resources),
.resources = wm831x_gpio_resources,
@@ -1405,11 +1252,6 @@ static struct mfd_cell wm8320_devs[] = {
.resources = wm831x_on_resources,
},
{
- .name = "wm831x-rtc",
- .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
- .resources = wm831x_rtc_resources,
- },
- {
.name = "wm831x-status",
.id = 1,
.num_resources = ARRAY_SIZE(wm831x_status1_resources),
@@ -1428,6 +1270,22 @@ static struct mfd_cell wm8320_devs[] = {
},
};
+static struct mfd_cell touch_devs[] = {
+ {
+ .name = "wm831x-touch",
+ .num_resources = ARRAY_SIZE(wm831x_touch_resources),
+ .resources = wm831x_touch_resources,
+ },
+};
+
+static struct mfd_cell rtc_devs[] = {
+ {
+ .name = "wm831x-rtc",
+ .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
+ .resources = wm831x_rtc_resources,
+ },
+};
+
static struct mfd_cell backlight_devs[] = {
{
.name = "wm831x-backlight",
@@ -1440,14 +1298,12 @@ static struct mfd_cell backlight_devs[] = {
int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
{
struct wm831x_pdata *pdata = wm831x->dev->platform_data;
- int rev;
+ int rev, wm831x_num;
enum wm831x_parent parent;
int ret, i;
mutex_init(&wm831x->io_lock);
mutex_init(&wm831x->key_lock);
- mutex_init(&wm831x->auxadc_lock);
- init_completion(&wm831x->auxadc_done);
dev_set_drvdata(wm831x->dev, wm831x);
ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID);
@@ -1592,45 +1448,51 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
}
}
+ /* Multiply by 10 as we have many subdevices of the same type */
+ if (pdata && pdata->wm831x_num)
+ wm831x_num = pdata->wm831x_num * 10;
+ else
+ wm831x_num = -1;
+
ret = wm831x_irq_init(wm831x, irq);
if (ret != 0)
goto err;
- if (wm831x->irq_base) {
- ret = request_threaded_irq(wm831x->irq_base +
- WM831X_IRQ_AUXADC_DATA,
- NULL, wm831x_auxadc_irq, 0,
- "auxadc", wm831x);
- if (ret < 0)
- dev_err(wm831x->dev, "AUXADC IRQ request failed: %d\n",
- ret);
- }
+ wm831x_auxadc_init(wm831x);
/* The core device is up, instantiate the subdevices. */
switch (parent) {
case WM8310:
- ret = mfd_add_devices(wm831x->dev, -1,
+ ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8310_devs, ARRAY_SIZE(wm8310_devs),
NULL, wm831x->irq_base);
break;
case WM8311:
- ret = mfd_add_devices(wm831x->dev, -1,
+ ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8311_devs, ARRAY_SIZE(wm8311_devs),
NULL, wm831x->irq_base);
+ if (!pdata || !pdata->disable_touch)
+ mfd_add_devices(wm831x->dev, wm831x_num,
+ touch_devs, ARRAY_SIZE(touch_devs),
+ NULL, wm831x->irq_base);
break;
case WM8312:
- ret = mfd_add_devices(wm831x->dev, -1,
+ ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8312_devs, ARRAY_SIZE(wm8312_devs),
NULL, wm831x->irq_base);
+ if (!pdata || !pdata->disable_touch)
+ mfd_add_devices(wm831x->dev, wm831x_num,
+ touch_devs, ARRAY_SIZE(touch_devs),
+ NULL, wm831x->irq_base);
break;
case WM8320:
case WM8321:
case WM8325:
case WM8326:
- ret = mfd_add_devices(wm831x->dev, -1,
+ ret = mfd_add_devices(wm831x->dev, wm831x_num,
wm8320_devs, ARRAY_SIZE(wm8320_devs),
NULL, wm831x->irq_base);
break;
@@ -1645,9 +1507,30 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
goto err_irq;
}
+ /* The RTC can only be used if the 32.768kHz crystal is
+ * enabled; this can't be controlled by software at runtime.
+ */
+ ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to read clock status: %d\n", ret);
+ goto err_irq;
+ }
+
+ if (ret & WM831X_XTAL_ENA) {
+ ret = mfd_add_devices(wm831x->dev, wm831x_num,
+ rtc_devs, ARRAY_SIZE(rtc_devs),
+ NULL, wm831x->irq_base);
+ if (ret != 0) {
+ dev_err(wm831x->dev, "Failed to add RTC: %d\n", ret);
+ goto err_irq;
+ }
+ } else {
+ dev_info(wm831x->dev, "32.768kHz clock disabled, no RTC\n");
+ }
+
if (pdata && pdata->backlight) {
/* Treat errors as non-critical */
- ret = mfd_add_devices(wm831x->dev, -1, backlight_devs,
+ ret = mfd_add_devices(wm831x->dev, wm831x_num, backlight_devs,
ARRAY_SIZE(backlight_devs), NULL,
wm831x->irq_base);
if (ret < 0)
diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
index 42b928e..ada1835 100644
--- a/drivers/mfd/wm831x-irq.c
+++ b/drivers/mfd/wm831x-irq.c
@@ -348,6 +348,15 @@ static void wm831x_irq_sync_unlock(struct irq_data *data)
struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
int i;
+ for (i = 0; i < ARRAY_SIZE(wm831x->gpio_update); i++) {
+ if (wm831x->gpio_update[i]) {
+ wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + i,
+ WM831X_GPN_INT_MODE | WM831X_GPN_POL,
+ wm831x->gpio_update[i]);
+ wm831x->gpio_update[i] = 0;
+ }
+ }
+
for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
/* If there's been a change in the mask write it back
* to the hardware. */
@@ -387,7 +396,7 @@ static void wm831x_irq_disable(struct irq_data *data)
static int wm831x_irq_set_type(struct irq_data *data, unsigned int type)
{
struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
- int val, irq;
+ int irq;
irq = data->irq - wm831x->irq_base;
@@ -399,22 +408,30 @@ static int wm831x_irq_set_type(struct irq_data *data, unsigned int type)
return -EINVAL;
}
+ /* Rebase the IRQ into the GPIO range so we've got a sensible array
+ * index.
+ */
+ irq -= WM831X_IRQ_GPIO_1;
+
+ /* We set the high bit to flag that we need an update; don't
+ * do the update here as we can be called with the bus lock
+ * held.
+ */
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
- val = WM831X_GPN_INT_MODE;
+ wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_INT_MODE;
break;
case IRQ_TYPE_EDGE_RISING:
- val = WM831X_GPN_POL;
+ wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_POL;
break;
case IRQ_TYPE_EDGE_FALLING:
- val = 0;
+ wm831x->gpio_update[irq] = 0x10000;
break;
default:
return -EINVAL;
}
- return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + irq,
- WM831X_GPN_INT_MODE | WM831X_GPN_POL, val);
+ return 0;
}
static struct irq_chip wm831x_irq_chip = {
@@ -432,7 +449,7 @@ static irqreturn_t wm831x_irq_thread(int irq, void *data)
{
struct wm831x *wm831x = data;
unsigned int i;
- int primary;
+ int primary, status_addr;
int status_regs[WM831X_NUM_IRQ_REGS] = { 0 };
int read[WM831X_NUM_IRQ_REGS] = { 0 };
int *status;
@@ -467,8 +484,9 @@ static irqreturn_t wm831x_irq_thread(int irq, void *data)
/* Hopefully there should only be one register to read
* each time otherwise we ought to do a block read. */
if (!read[offset]) {
- *status = wm831x_reg_read(wm831x,
- irq_data_to_status_reg(&wm831x_irqs[i]));
+ status_addr = irq_data_to_status_reg(&wm831x_irqs[i]);
+
+ *status = wm831x_reg_read(wm831x, status_addr);
if (*status < 0) {
dev_err(wm831x->dev,
"Failed to read IRQ status: %d\n",
@@ -477,26 +495,21 @@ static irqreturn_t wm831x_irq_thread(int irq, void *data)
}
read[offset] = 1;
+
+ /* Ignore any bits that we don't think are masked */
+ *status &= ~wm831x->irq_masks_cur[offset];
+
+ /* Acknowledge now so we don't miss
+ * notifications while we handle.
+ */
+ wm831x_reg_write(wm831x, status_addr, *status);
}
- /* Report it if it isn't masked, or forget the status. */
- if ((*status & ~wm831x->irq_masks_cur[offset])
- & wm831x_irqs[i].mask)
+ if (*status & wm831x_irqs[i].mask)
handle_nested_irq(wm831x->irq_base + i);
- else
- *status &= ~wm831x_irqs[i].mask;
}
out:
- /* Touchscreen interrupts are handled specially in the driver */
- status_regs[0] &= ~(WM831X_TCHDATA_EINT | WM831X_TCHPD_EINT);
-
- for (i = 0; i < ARRAY_SIZE(status_regs); i++) {
- if (status_regs[i])
- wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1 + i,
- status_regs[i]);
- }
-
return IRQ_HANDLED;
}
@@ -515,13 +528,22 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq)
0xffff);
}
- if (!pdata || !pdata->irq_base) {
- dev_err(wm831x->dev,
- "No interrupt base specified, no interrupts\n");
+ /* Try to dynamically allocate IRQs if no base is specified */
+ if (!pdata || !pdata->irq_base)
+ wm831x->irq_base = -1;
+ else
+ wm831x->irq_base = pdata->irq_base;
+
+ wm831x->irq_base = irq_alloc_descs(wm831x->irq_base, 0,
+ WM831X_NUM_IRQS, 0);
+ if (wm831x->irq_base < 0) {
+ dev_warn(wm831x->dev, "Failed to allocate IRQs: %d\n",
+ wm831x->irq_base);
+ wm831x->irq_base = 0;
return 0;
}
- if (pdata->irq_cmos)
+ if (pdata && pdata->irq_cmos)
i = 0;
else
i = WM831X_IRQ_OD;
@@ -541,7 +563,6 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq)
}
wm831x->irq = irq;
- wm831x->irq_base = pdata->irq_base;
/* Register them with genirq */
for (cur_irq = wm831x->irq_base;
diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c
index ed4b22a..8a1fafd 100644
--- a/drivers/mfd/wm8350-irq.c
+++ b/drivers/mfd/wm8350-irq.c
@@ -473,17 +473,13 @@ int wm8350_irq_init(struct wm8350 *wm8350, int irq,
{
int ret, cur_irq, i;
int flags = IRQF_ONESHOT;
+ int irq_base = -1;
if (!irq) {
dev_warn(wm8350->dev, "No interrupt support, no core IRQ\n");
return 0;
}
- if (!pdata || !pdata->irq_base) {
- dev_warn(wm8350->dev, "No interrupt support, no IRQ base\n");
- return 0;
- }
-
/* Mask top level interrupts */
wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0xFFFF);
@@ -502,7 +498,17 @@ int wm8350_irq_init(struct wm8350 *wm8350, int irq,
wm8350->chip_irq = irq;
wm8350->irq_base = pdata->irq_base;
- if (pdata->irq_high) {
+ if (pdata && pdata->irq_base > 0)
+ irq_base = pdata->irq_base;
+
+ wm8350->irq_base = irq_alloc_descs(irq_base, 0, ARRAY_SIZE(wm8350_irqs), 0);
+ if (wm8350->irq_base < 0) {
+ dev_warn(wm8350->dev, "Allocating irqs failed with %d\n",
+ wm8350->irq_base);
+ return 0;
+ }
+
+ if (pdata && pdata->irq_high) {
flags |= IRQF_TRIGGER_HIGH;
wm8350_set_bits(wm8350, WM8350_SYSTEM_CONTROL_1,
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index e198d40..96479c9 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -316,7 +316,7 @@ static int wm8994_suspend(struct device *dev)
static int wm8994_resume(struct device *dev)
{
struct wm8994 *wm8994 = dev_get_drvdata(dev);
- int ret;
+ int ret, i;
/* We may have lied to the PM core about suspending */
if (!wm8994->suspended)
@@ -329,10 +329,16 @@ static int wm8994_resume(struct device *dev)
return ret;
}
- ret = wm8994_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK,
- WM8994_NUM_IRQ_REGS * 2, &wm8994->irq_masks_cur);
- if (ret < 0)
- dev_err(dev, "Failed to restore interrupt masks: %d\n", ret);
+ /* Write register at a time as we use the cache on the CPU so store
+ * it in native endian.
+ */
+ for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) {
+ ret = wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK
+ + i, wm8994->irq_masks_cur[i]);
+ if (ret < 0)
+ dev_err(dev, "Failed to restore interrupt masks: %d\n",
+ ret);
+ }
ret = wm8994_write(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2,
&wm8994->ldo_regs);
@@ -403,7 +409,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
break;
default:
BUG();
- return -EINVAL;
+ goto err;
}
wm8994->supplies = kzalloc(sizeof(struct regulator_bulk_data) *
@@ -425,7 +431,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
break;
default:
BUG();
- return -EINVAL;
+ goto err;
}
ret = regulator_bulk_get(wm8994->dev, wm8994->num_supplies,
@@ -476,13 +482,18 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
goto err_enable;
}
- switch (ret) {
- case 0:
- case 1:
- if (wm8994->type == WM8994)
+ switch (wm8994->type) {
+ case WM8994:
+ switch (ret) {
+ case 0:
+ case 1:
dev_warn(wm8994->dev,
"revision %c not fully supported\n",
'A' + ret);
+ break;
+ default:
+ break;
+ }
break;
default:
break;
diff --git a/drivers/mfd/wm8994-irq.c b/drivers/mfd/wm8994-irq.c
index 71c6e8f..d682f7b 100644
--- a/drivers/mfd/wm8994-irq.c
+++ b/drivers/mfd/wm8994-irq.c
@@ -231,12 +231,6 @@ static irqreturn_t wm8994_irq_thread(int irq, void *data)
status[i] &= ~wm8994->irq_masks_cur[i];
}
- /* Report */
- for (i = 0; i < ARRAY_SIZE(wm8994_irqs); i++) {
- if (status[wm8994_irqs[i].reg - 1] & wm8994_irqs[i].mask)
- handle_nested_irq(wm8994->irq_base + i);
- }
-
/* Ack any unmasked IRQs */
for (i = 0; i < ARRAY_SIZE(status); i++) {
if (status[i])
@@ -244,6 +238,12 @@ static irqreturn_t wm8994_irq_thread(int irq, void *data)
status[i]);
}
+ /* Report */
+ for (i = 0; i < ARRAY_SIZE(wm8994_irqs); i++) {
+ if (status[wm8994_irqs[i].reg - 1] & wm8994_irqs[i].mask)
+ handle_nested_irq(wm8994->irq_base + i);
+ }
+
return IRQ_HANDLED;
}
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 118eb21..c7fd2c0 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -249,6 +249,12 @@ config REGULATOR_TPS6507X
three step-down converters and two general-purpose LDO voltage regulators.
It supports TI's software based Class-2 SmartReflex implementation.
+config REGULATOR_TPS65912
+ tristate "TI TPS65912 Power regulator"
+ depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
+ help
+ This driver supports TPS65912 voltage regulator chip.
+
config REGULATOR_88PM8607
bool "Marvell 88PM8607 Power regulators"
depends on MFD_88PM860X=y
@@ -304,5 +310,12 @@ config REGULATOR_TPS65910
help
This driver supports TPS65910 voltage regulator chips.
+config REGULATOR_AAT2870
+ tristate "AnalogicTech AAT2870 Regulators"
+ depends on MFD_AAT2870_CORE
+ help
+ If you have a AnalogicTech AAT2870 say Y to enable the
+ regulator driver.
+
endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 3932d2e..040d5aa 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -38,10 +38,12 @@ obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o
+obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o
obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
+obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c
new file mode 100644
index 0000000..cd41045
--- /dev/null
+++ b/drivers/regulator/aat2870-regulator.c
@@ -0,0 +1,232 @@
+/*
+ * linux/drivers/regulator/aat2870-regulator.c
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <jinyoungp@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/aat2870.h>
+
+struct aat2870_regulator {
+ struct platform_device *pdev;
+ struct regulator_desc desc;
+
+ const int *voltages; /* uV */
+
+ int min_uV;
+ int max_uV;
+
+ u8 enable_addr;
+ u8 enable_shift;
+ u8 enable_mask;
+
+ u8 voltage_addr;
+ u8 voltage_shift;
+ u8 voltage_mask;
+};
+
+static int aat2870_ldo_list_voltage(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+
+ return ri->voltages[selector];
+}
+
+static int aat2870_ldo_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+
+ return aat2870->update(aat2870, ri->voltage_addr, ri->voltage_mask,
+ (selector << ri->voltage_shift) & ri->voltage_mask);
+}
+
+static int aat2870_ldo_get_voltage_sel(struct regulator_dev *rdev)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+ u8 val;
+ int ret;
+
+ ret = aat2870->read(aat2870, ri->voltage_addr, &val);
+ if (ret)
+ return ret;
+
+ return (val & ri->voltage_mask) >> ri->voltage_shift;
+}
+
+static int aat2870_ldo_enable(struct regulator_dev *rdev)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+
+ return aat2870->update(aat2870, ri->enable_addr, ri->enable_mask,
+ ri->enable_mask);
+}
+
+static int aat2870_ldo_disable(struct regulator_dev *rdev)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+
+ return aat2870->update(aat2870, ri->enable_addr, ri->enable_mask, 0);
+}
+
+static int aat2870_ldo_is_enabled(struct regulator_dev *rdev)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+ u8 val;
+ int ret;
+
+ ret = aat2870->read(aat2870, ri->enable_addr, &val);
+ if (ret)
+ return ret;
+
+ return val & ri->enable_mask ? 1 : 0;
+}
+
+static struct regulator_ops aat2870_ldo_ops = {
+ .list_voltage = aat2870_ldo_list_voltage,
+ .set_voltage_sel = aat2870_ldo_set_voltage_sel,
+ .get_voltage_sel = aat2870_ldo_get_voltage_sel,
+ .enable = aat2870_ldo_enable,
+ .disable = aat2870_ldo_disable,
+ .is_enabled = aat2870_ldo_is_enabled,
+};
+
+static const int aat2870_ldo_voltages[] = {
+ 1200000, 1300000, 1500000, 1600000,
+ 1800000, 2000000, 2200000, 2500000,
+ 2600000, 2700000, 2800000, 2900000,
+ 3000000, 3100000, 3200000, 3300000,
+};
+
+#define AAT2870_LDO(ids) \
+ { \
+ .desc = { \
+ .name = #ids, \
+ .id = AAT2870_ID_##ids, \
+ .n_voltages = ARRAY_SIZE(aat2870_ldo_voltages), \
+ .ops = &aat2870_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ }, \
+ .voltages = aat2870_ldo_voltages, \
+ .min_uV = 1200000, \
+ .max_uV = 3300000, \
+ }
+
+static struct aat2870_regulator aat2870_regulators[] = {
+ AAT2870_LDO(LDOA),
+ AAT2870_LDO(LDOB),
+ AAT2870_LDO(LDOC),
+ AAT2870_LDO(LDOD),
+};
+
+static struct aat2870_regulator *aat2870_get_regulator(int id)
+{
+ struct aat2870_regulator *ri = NULL;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(aat2870_regulators); i++) {
+ ri = &aat2870_regulators[i];
+ if (ri->desc.id == id)
+ break;
+ }
+
+ if (!ri)
+ return NULL;
+
+ ri->enable_addr = AAT2870_LDO_EN;
+ ri->enable_shift = id - AAT2870_ID_LDOA;
+ ri->enable_mask = 0x1 << ri->enable_shift;
+
+ ri->voltage_addr = (id - AAT2870_ID_LDOA) / 2 ?
+ AAT2870_LDO_CD : AAT2870_LDO_AB;
+ ri->voltage_shift = (id - AAT2870_ID_LDOA) % 2 ? 0 : 4;
+ ri->voltage_mask = 0xF << ri->voltage_shift;
+
+ return ri;
+}
+
+static int aat2870_regulator_probe(struct platform_device *pdev)
+{
+ struct aat2870_regulator *ri;
+ struct regulator_dev *rdev;
+
+ ri = aat2870_get_regulator(pdev->id);
+ if (!ri) {
+ dev_err(&pdev->dev, "Invalid device ID, %d\n", pdev->id);
+ return -EINVAL;
+ }
+ ri->pdev = pdev;
+
+ rdev = regulator_register(&ri->desc, &pdev->dev,
+ pdev->dev.platform_data, ri);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "Failed to register regulator %s\n",
+ ri->desc.name);
+ return PTR_ERR(rdev);
+ }
+ platform_set_drvdata(pdev, rdev);
+
+ return 0;
+}
+
+static int __devexit aat2870_regulator_remove(struct platform_device *pdev)
+{
+ struct regulator_dev *rdev = platform_get_drvdata(pdev);
+
+ regulator_unregister(rdev);
+ return 0;
+}
+
+static struct platform_driver aat2870_regulator_driver = {
+ .driver = {
+ .name = "aat2870-regulator",
+ .owner = THIS_MODULE,
+ },
+ .probe = aat2870_regulator_probe,
+ .remove = __devexit_p(aat2870_regulator_remove),
+};
+
+static int __init aat2870_regulator_init(void)
+{
+ return platform_driver_register(&aat2870_regulator_driver);
+}
+subsys_initcall(aat2870_regulator_init);
+
+static void __exit aat2870_regulator_exit(void)
+{
+ platform_driver_unregister(&aat2870_regulator_driver);
+}
+module_exit(aat2870_regulator_exit);
+
+MODULE_DESCRIPTION("AnalogicTech AAT2870 Regulator");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jin Park <jinyoungp@nvidia.com>");
diff --git a/drivers/regulator/tps65912-regulator.c b/drivers/regulator/tps65912-regulator.c
new file mode 100644
index 0000000..3a9313e
--- /dev/null
+++ b/drivers/regulator/tps65912-regulator.c
@@ -0,0 +1,800 @@
+/*
+ * tps65912.c -- TI tps65912
+ *
+ * Copyright 2011 Texas Instruments Inc.
+ *
+ * Author: Margarita Olaya Cabrera <magi@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This driver is based on wm8350 implementation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/mfd/tps65912.h>
+
+/* DCDC's */
+#define TPS65912_REG_DCDC1 0
+#define TPS65912_REG_DCDC2 1
+#define TPS65912_REG_DCDC3 2
+#define TPS65912_REG_DCDC4 3
+
+/* LDOs */
+#define TPS65912_REG_LDO1 4
+#define TPS65912_REG_LDO2 5
+#define TPS65912_REG_LDO3 6
+#define TPS65912_REG_LDO4 7
+#define TPS65912_REG_LDO5 8
+#define TPS65912_REG_LDO6 9
+#define TPS65912_REG_LDO7 10
+#define TPS65912_REG_LDO8 11
+#define TPS65912_REG_LDO9 12
+#define TPS65912_REG_LDO10 13
+
+#define TPS65912_MAX_REG_ID TPS65912_REG_LDO_10
+
+/* Number of step-down converters available */
+#define TPS65912_NUM_DCDC 4
+
+/* Number of LDO voltage regulators available */
+#define TPS65912_NUM_LDO 10
+
+/* Number of total regulators available */
+#define TPS65912_NUM_REGULATOR (TPS65912_NUM_DCDC + TPS65912_NUM_LDO)
+
+#define TPS65912_REG_ENABLED 0x80
+#define OP_SELREG_MASK 0x40
+#define OP_SELREG_SHIFT 6
+
+struct tps_info {
+ const char *name;
+};
+
+static struct tps_info tps65912_regs[] = {
+ {
+ .name = "DCDC1",
+ },
+ {
+ .name = "DCDC2",
+ },
+ {
+ .name = "DCDC3",
+ },
+ {
+ .name = "DCDC4",
+ },
+ {
+ .name = "LDO1",
+ },
+ {
+ .name = "LDO2",
+ },
+ {
+ .name = "LDO3",
+ },
+ {
+ .name = "LDO4",
+ },
+ {
+ .name = "LDO5",
+ },
+ {
+ .name = "LDO6",
+ },
+ {
+ .name = "LDO7",
+ },
+ {
+ .name = "LDO8",
+ },
+ {
+ .name = "LDO9",
+ },
+ {
+ .name = "LDO10",
+ },
+};
+
+struct tps65912_reg {
+ struct regulator_desc desc[TPS65912_NUM_REGULATOR];
+ struct tps65912 *mfd;
+ struct regulator_dev *rdev[TPS65912_NUM_REGULATOR];
+ struct tps_info *info[TPS65912_NUM_REGULATOR];
+ /* for read/write access */
+ struct mutex io_lock;
+ int mode;
+ int (*get_ctrl_reg)(int);
+ int dcdc1_range;
+ int dcdc2_range;
+ int dcdc3_range;
+ int dcdc4_range;
+ int pwm_mode_reg;
+ int eco_reg;
+};
+
+static int tps65912_get_range(struct tps65912_reg *pmic, int id)
+{
+ struct tps65912 *mfd = pmic->mfd;
+
+ if (id > TPS65912_REG_DCDC4)
+ return 0;
+
+ switch (id) {
+ case TPS65912_REG_DCDC1:
+ pmic->dcdc1_range = tps65912_reg_read(mfd,
+ TPS65912_DCDC1_LIMIT);
+ if (pmic->dcdc1_range < 0)
+ return pmic->dcdc1_range;
+ pmic->dcdc1_range = (pmic->dcdc1_range &
+ DCDC_LIMIT_RANGE_MASK) >> DCDC_LIMIT_RANGE_SHIFT;
+ return pmic->dcdc1_range;
+ case TPS65912_REG_DCDC2:
+ pmic->dcdc2_range = tps65912_reg_read(mfd,
+ TPS65912_DCDC2_LIMIT);
+ if (pmic->dcdc2_range < 0)
+ return pmic->dcdc2_range;
+ pmic->dcdc2_range = (pmic->dcdc2_range &
+ DCDC_LIMIT_RANGE_MASK) >> DCDC_LIMIT_RANGE_SHIFT;
+ return pmic->dcdc2_range;
+ case TPS65912_REG_DCDC3:
+ pmic->dcdc3_range = tps65912_reg_read(mfd,
+ TPS65912_DCDC3_LIMIT);
+ if (pmic->dcdc3_range < 0)
+ return pmic->dcdc3_range;
+ pmic->dcdc3_range = (pmic->dcdc3_range &
+ DCDC_LIMIT_RANGE_MASK) >> DCDC_LIMIT_RANGE_SHIFT;
+ return pmic->dcdc3_range;
+ case TPS65912_REG_DCDC4:
+ pmic->dcdc4_range = tps65912_reg_read(mfd,
+ TPS65912_DCDC4_LIMIT);
+ if (pmic->dcdc4_range < 0)
+ return pmic->dcdc4_range;
+ pmic->dcdc4_range = (pmic->dcdc4_range &
+ DCDC_LIMIT_RANGE_MASK) >> DCDC_LIMIT_RANGE_SHIFT;
+ return pmic->dcdc4_range;
+ default:
+ return 0;
+ }
+}
+
+static unsigned long tps65912_vsel_to_uv_range0(u8 vsel)
+{
+ unsigned long uv;
+
+ uv = ((vsel * 12500) + 500000);
+ return uv;
+}
+
+static unsigned long tps65912_vsel_to_uv_range1(u8 vsel)
+{
+ unsigned long uv;
+
+ uv = ((vsel * 12500) + 700000);
+ return uv;
+}
+
+static unsigned long tps65912_vsel_to_uv_range2(u8 vsel)
+{
+ unsigned long uv;
+
+ uv = ((vsel * 25000) + 500000);
+ return uv;
+}
+
+static unsigned long tps65912_vsel_to_uv_range3(u8 vsel)
+{
+ unsigned long uv;
+
+ if (vsel == 0x3f)
+ uv = 3800000;
+ else
+ uv = ((vsel * 50000) + 500000);
+
+ return uv;
+}
+
+static unsigned long tps65912_vsel_to_uv_ldo(u8 vsel)
+{
+ unsigned long uv = 0;
+
+ if (vsel <= 32)
+ uv = ((vsel * 25000) + 800000);
+ else if (vsel > 32 && vsel <= 60)
+ uv = (((vsel - 32) * 50000) + 1600000);
+ else if (vsel > 60)
+ uv = (((vsel - 60) * 100000) + 3000000);
+
+ return uv;
+}
+
+static int tps65912_get_ctrl_register(int id)
+{
+ switch (id) {
+ case TPS65912_REG_DCDC1:
+ return TPS65912_DCDC1_AVS;
+ case TPS65912_REG_DCDC2:
+ return TPS65912_DCDC2_AVS;
+ case TPS65912_REG_DCDC3:
+ return TPS65912_DCDC3_AVS;
+ case TPS65912_REG_DCDC4:
+ return TPS65912_DCDC4_AVS;
+ case TPS65912_REG_LDO1:
+ return TPS65912_LDO1_AVS;
+ case TPS65912_REG_LDO2:
+ return TPS65912_LDO2_AVS;
+ case TPS65912_REG_LDO3:
+ return TPS65912_LDO3_AVS;
+ case TPS65912_REG_LDO4:
+ return TPS65912_LDO4_AVS;
+ case TPS65912_REG_LDO5:
+ return TPS65912_LDO5;
+ case TPS65912_REG_LDO6:
+ return TPS65912_LDO6;
+ case TPS65912_REG_LDO7:
+ return TPS65912_LDO7;
+ case TPS65912_REG_LDO8:
+ return TPS65912_LDO8;
+ case TPS65912_REG_LDO9:
+ return TPS65912_LDO9;
+ case TPS65912_REG_LDO10:
+ return TPS65912_LDO10;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int tps65912_get_dcdc_sel_register(struct tps65912_reg *pmic, int id)
+{
+ struct tps65912 *mfd = pmic->mfd;
+ int opvsel = 0, sr = 0;
+ u8 reg = 0;
+
+ if (id < TPS65912_REG_DCDC1 || id > TPS65912_REG_DCDC4)
+ return -EINVAL;
+
+ switch (id) {
+ case TPS65912_REG_DCDC1:
+ opvsel = tps65912_reg_read(mfd, TPS65912_DCDC1_OP);
+ sr = ((opvsel & OP_SELREG_MASK) >> OP_SELREG_SHIFT);
+ if (sr)
+ reg = TPS65912_DCDC1_AVS;
+ else
+ reg = TPS65912_DCDC1_OP;
+ break;
+ case TPS65912_REG_DCDC2:
+ opvsel = tps65912_reg_read(mfd, TPS65912_DCDC2_OP);
+ sr = (opvsel & OP_SELREG_MASK) >> OP_SELREG_SHIFT;
+ if (sr)
+ reg = TPS65912_DCDC2_AVS;
+ else
+ reg = TPS65912_DCDC2_OP;
+ break;
+ case TPS65912_REG_DCDC3:
+ opvsel = tps65912_reg_read(mfd, TPS65912_DCDC3_OP);
+ sr = (opvsel & OP_SELREG_MASK) >> OP_SELREG_SHIFT;
+ if (sr)
+ reg = TPS65912_DCDC3_AVS;
+ else
+ reg = TPS65912_DCDC3_OP;
+ break;
+ case TPS65912_REG_DCDC4:
+ opvsel = tps65912_reg_read(mfd, TPS65912_DCDC4_OP);
+ sr = (opvsel & OP_SELREG_MASK) >> OP_SELREG_SHIFT;
+ if (sr)
+ reg = TPS65912_DCDC4_AVS;
+ else
+ reg = TPS65912_DCDC4_OP;
+ break;
+ }
+ return reg;
+}
+
+static int tps65912_get_ldo_sel_register(struct tps65912_reg *pmic, int id)
+{
+ struct tps65912 *mfd = pmic->mfd;
+ int opvsel = 0, sr = 0;
+ u8 reg = 0;
+
+ if (id < TPS65912_REG_LDO1 || id > TPS65912_REG_LDO10)
+ return -EINVAL;
+
+ switch (id) {
+ case TPS65912_REG_LDO1:
+ opvsel = tps65912_reg_read(mfd, TPS65912_LDO1_OP);
+ sr = (opvsel & OP_SELREG_MASK) >> OP_SELREG_SHIFT;
+ if (sr)
+ reg = TPS65912_LDO1_AVS;
+ else
+ reg = TPS65912_LDO1_OP;
+ break;
+ case TPS65912_REG_LDO2:
+ opvsel = tps65912_reg_read(mfd, TPS65912_LDO2_OP);
+ sr = (opvsel & OP_SELREG_MASK) >> OP_SELREG_SHIFT;
+ if (sr)
+ reg = TPS65912_LDO2_AVS;
+ else
+ reg = TPS65912_LDO2_OP;
+ break;
+ case TPS65912_REG_LDO3:
+ opvsel = tps65912_reg_read(mfd, TPS65912_LDO3_OP);
+ sr = (opvsel & OP_SELREG_MASK) >> OP_SELREG_SHIFT;
+ if (sr)
+ reg = TPS65912_LDO3_AVS;
+ else
+ reg = TPS65912_LDO3_OP;
+ break;
+ case TPS65912_REG_LDO4:
+ opvsel = tps65912_reg_read(mfd, TPS65912_LDO4_OP);
+ sr = (opvsel & OP_SELREG_MASK) >> OP_SELREG_SHIFT;
+ if (sr)
+ reg = TPS65912_LDO4_AVS;
+ else
+ reg = TPS65912_LDO4_OP;
+ break;
+ case TPS65912_REG_LDO5:
+ reg = TPS65912_LDO5;
+ break;
+ case TPS65912_REG_LDO6:
+ reg = TPS65912_LDO6;
+ break;
+ case TPS65912_REG_LDO7:
+ reg = TPS65912_LDO7;
+ break;
+ case TPS65912_REG_LDO8:
+ reg = TPS65912_LDO8;
+ break;
+ case TPS65912_REG_LDO9:
+ reg = TPS65912_LDO9;
+ break;
+ case TPS65912_REG_LDO10:
+ reg = TPS65912_LDO10;
+ break;
+ }
+
+ return reg;
+}
+
+static int tps65912_get_mode_regiters(struct tps65912_reg *pmic, int id)
+{
+ switch (id) {
+ case TPS65912_REG_DCDC1:
+ pmic->pwm_mode_reg = TPS65912_DCDC1_CTRL;
+ pmic->eco_reg = TPS65912_DCDC1_AVS;
+ break;
+ case TPS65912_REG_DCDC2:
+ pmic->pwm_mode_reg = TPS65912_DCDC2_CTRL;
+ pmic->eco_reg = TPS65912_DCDC2_AVS;
+ break;
+ case TPS65912_REG_DCDC3:
+ pmic->pwm_mode_reg = TPS65912_DCDC3_CTRL;
+ pmic->eco_reg = TPS65912_DCDC3_AVS;
+ break;
+ case TPS65912_REG_DCDC4:
+ pmic->pwm_mode_reg = TPS65912_DCDC4_CTRL;
+ pmic->eco_reg = TPS65912_DCDC4_AVS;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int tps65912_reg_is_enabled(struct regulator_dev *dev)
+{
+ struct tps65912_reg *pmic = rdev_get_drvdata(dev);
+ struct tps65912 *mfd = pmic->mfd;
+ int reg, value, id = rdev_get_id(dev);
+
+ if (id < TPS65912_REG_DCDC1 || id > TPS65912_REG_LDO10)
+ return -EINVAL;
+
+ reg = pmic->get_ctrl_reg(id);
+ if (reg < 0)
+ return reg;
+
+ value = tps65912_reg_read(mfd, reg);
+ if (value < 0)
+ return value;
+
+ return value & TPS65912_REG_ENABLED;
+}
+
+static int tps65912_reg_enable(struct regulator_dev *dev)
+{
+ struct tps65912_reg *pmic = rdev_get_drvdata(dev);
+ struct tps65912 *mfd = pmic->mfd;
+ int id = rdev_get_id(dev);
+ int reg;
+
+ if (id < TPS65912_REG_DCDC1 || id > TPS65912_REG_LDO10)
+ return -EINVAL;
+
+ reg = pmic->get_ctrl_reg(id);
+ if (reg < 0)
+ return reg;
+
+ return tps65912_set_bits(mfd, reg, TPS65912_REG_ENABLED);
+}
+
+static int tps65912_reg_disable(struct regulator_dev *dev)
+{
+ struct tps65912_reg *pmic = rdev_get_drvdata(dev);
+ struct tps65912 *mfd = pmic->mfd;
+ int id = rdev_get_id(dev), reg;
+
+ reg = pmic->get_ctrl_reg(id);
+ if (reg < 0)
+ return reg;
+
+ return tps65912_clear_bits(mfd, reg, TPS65912_REG_ENABLED);
+}
+
+static int tps65912_set_mode(struct regulator_dev *dev, unsigned int mode)
+{
+ struct tps65912_reg *pmic = rdev_get_drvdata(dev);
+ struct tps65912 *mfd = pmic->mfd;
+ int pwm_mode, eco, id = rdev_get_id(dev);
+
+ tps65912_get_mode_regiters(pmic, id);
+
+ pwm_mode = tps65912_reg_read(mfd, pmic->pwm_mode_reg);
+ eco = tps65912_reg_read(mfd, pmic->eco_reg);
+
+ pwm_mode &= DCDCCTRL_DCDC_MODE_MASK;
+ eco &= DCDC_AVS_ECO_MASK;
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ /* Verify if mode alredy set */
+ if (pwm_mode && !eco)
+ break;
+ tps65912_set_bits(mfd, pmic->pwm_mode_reg, DCDCCTRL_DCDC_MODE_MASK);
+ tps65912_clear_bits(mfd, pmic->eco_reg, DCDC_AVS_ECO_MASK);
+ break;
+ case REGULATOR_MODE_NORMAL:
+ case REGULATOR_MODE_IDLE:
+ if (!pwm_mode && !eco)
+ break;
+ tps65912_clear_bits(mfd, pmic->pwm_mode_reg, DCDCCTRL_DCDC_MODE_MASK);
+ tps65912_clear_bits(mfd, pmic->eco_reg, DCDC_AVS_ECO_MASK);
+ break;
+ case REGULATOR_MODE_STANDBY:
+ if (!pwm_mode && eco)
+ break;
+ tps65912_clear_bits(mfd, pmic->pwm_mode_reg, DCDCCTRL_DCDC_MODE_MASK);
+ tps65912_set_bits(mfd, pmic->eco_reg, DCDC_AVS_ECO_MASK);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static unsigned int tps65912_get_mode(struct regulator_dev *dev)
+{
+ struct tps65912_reg *pmic = rdev_get_drvdata(dev);
+ struct tps65912 *mfd = pmic->mfd;
+ int pwm_mode, eco, mode = 0, id = rdev_get_id(dev);
+
+ tps65912_get_mode_regiters(pmic, id);
+
+ pwm_mode = tps65912_reg_read(mfd, pmic->pwm_mode_reg);
+ eco = tps65912_reg_read(mfd, pmic->eco_reg);
+
+ pwm_mode &= DCDCCTRL_DCDC_MODE_MASK;
+ eco &= DCDC_AVS_ECO_MASK;
+
+ if (pwm_mode && !eco)
+ mode = REGULATOR_MODE_FAST;
+ else if (!pwm_mode && !eco)
+ mode = REGULATOR_MODE_NORMAL;
+ else if (!pwm_mode && eco)
+ mode = REGULATOR_MODE_STANDBY;
+
+ return mode;
+}
+
+static int tps65912_get_voltage_dcdc(struct regulator_dev *dev)
+{
+ struct tps65912_reg *pmic = rdev_get_drvdata(dev);
+ struct tps65912 *mfd = pmic->mfd;
+ int id = rdev_get_id(dev), voltage = 0, range;
+ int opvsel = 0, avsel = 0, sr, vsel;
+
+ switch (id) {
+ case TPS65912_REG_DCDC1:
+ opvsel = tps65912_reg_read(mfd, TPS65912_DCDC1_OP);
+ avsel = tps65912_reg_read(mfd, TPS65912_DCDC1_AVS);
+ range = pmic->dcdc1_range;
+ break;
+ case TPS65912_REG_DCDC2:
+ opvsel = tps65912_reg_read(mfd, TPS65912_DCDC2_OP);
+ avsel = tps65912_reg_read(mfd, TPS65912_DCDC2_AVS);
+ range = pmic->dcdc2_range;
+ break;
+ case TPS65912_REG_DCDC3:
+ opvsel = tps65912_reg_read(mfd, TPS65912_DCDC3_OP);
+ avsel = tps65912_reg_read(mfd, TPS65912_DCDC3_AVS);
+ range = pmic->dcdc3_range;
+ break;
+ case TPS65912_REG_DCDC4:
+ opvsel = tps65912_reg_read(mfd, TPS65912_DCDC4_OP);
+ avsel = tps65912_reg_read(mfd, TPS65912_DCDC4_AVS);
+ range = pmic->dcdc4_range;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ sr = (opvsel & OP_SELREG_MASK) >> OP_SELREG_SHIFT;
+ if (sr)
+ vsel = avsel;
+ else
+ vsel = opvsel;
+ vsel &= 0x3F;
+
+ switch (range) {
+ case 0:
+ /* 0.5 - 1.2875V in 12.5mV steps */
+ voltage = tps65912_vsel_to_uv_range0(vsel);
+ break;
+ case 1:
+ /* 0.7 - 1.4875V in 12.5mV steps */
+ voltage = tps65912_vsel_to_uv_range1(vsel);
+ break;
+ case 2:
+ /* 0.5 - 2.075V in 25mV steps */
+ voltage = tps65912_vsel_to_uv_range2(vsel);
+ break;
+ case 3:
+ /* 0.5 - 3.8V in 50mV steps */
+ voltage = tps65912_vsel_to_uv_range3(vsel);
+ break;
+ }
+ return voltage;
+}
+
+static int tps65912_set_voltage_dcdc(struct regulator_dev *dev,
+ unsigned selector)
+{
+ struct tps65912_reg *pmic = rdev_get_drvdata(dev);
+ struct tps65912 *mfd = pmic->mfd;
+ int id = rdev_get_id(dev);
+ int value;
+ u8 reg;
+
+ reg = tps65912_get_dcdc_sel_register(pmic, id);
+ value = tps65912_reg_read(mfd, reg);
+ value &= 0xC0;
+ return tps65912_reg_write(mfd, reg, selector | value);
+}
+
+static int tps65912_get_voltage_ldo(struct regulator_dev *dev)
+{
+ struct tps65912_reg *pmic = rdev_get_drvdata(dev);
+ struct tps65912 *mfd = pmic->mfd;
+ int id = rdev_get_id(dev);
+ int vsel = 0;
+ u8 reg;
+
+ reg = tps65912_get_ldo_sel_register(pmic, id);
+ vsel = tps65912_reg_read(mfd, reg);
+ vsel &= 0x3F;
+
+ return tps65912_vsel_to_uv_ldo(vsel);
+}
+
+static int tps65912_set_voltage_ldo(struct regulator_dev *dev,
+ unsigned selector)
+{
+ struct tps65912_reg *pmic = rdev_get_drvdata(dev);
+ struct tps65912 *mfd = pmic->mfd;
+ int id = rdev_get_id(dev), reg, value;
+
+ reg = tps65912_get_ldo_sel_register(pmic, id);
+ value = tps65912_reg_read(mfd, reg);
+ value &= 0xC0;
+ return tps65912_reg_write(mfd, reg, selector | value);
+}
+
+static int tps65912_list_voltage_dcdc(struct regulator_dev *dev,
+ unsigned selector)
+{
+ struct tps65912_reg *pmic = rdev_get_drvdata(dev);
+ int range, voltage = 0, id = rdev_get_id(dev);
+
+ switch (id) {
+ case TPS65912_REG_DCDC1:
+ range = pmic->dcdc1_range;
+ break;
+ case TPS65912_REG_DCDC2:
+ range = pmic->dcdc2_range;
+ break;
+ case TPS65912_REG_DCDC3:
+ range = pmic->dcdc3_range;
+ break;
+ case TPS65912_REG_DCDC4:
+ range = pmic->dcdc4_range;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (range) {
+ case 0:
+ /* 0.5 - 1.2875V in 12.5mV steps */
+ voltage = tps65912_vsel_to_uv_range0(selector);
+ break;
+ case 1:
+ /* 0.7 - 1.4875V in 12.5mV steps */
+ voltage = tps65912_vsel_to_uv_range1(selector);
+ break;
+ case 2:
+ /* 0.5 - 2.075V in 25mV steps */
+ voltage = tps65912_vsel_to_uv_range2(selector);
+ break;
+ case 3:
+ /* 0.5 - 3.8V in 50mV steps */
+ voltage = tps65912_vsel_to_uv_range3(selector);
+ break;
+ }
+ return voltage;
+}
+
+static int tps65912_list_voltage_ldo(struct regulator_dev *dev,
+ unsigned selector)
+{
+ int ldo = rdev_get_id(dev);
+
+ if (ldo < TPS65912_REG_LDO1 || ldo > TPS65912_REG_LDO10)
+ return -EINVAL;
+
+ return tps65912_vsel_to_uv_ldo(selector);
+}
+
+/* Operations permitted on DCDCx */
+static struct regulator_ops tps65912_ops_dcdc = {
+ .is_enabled = tps65912_reg_is_enabled,
+ .enable = tps65912_reg_enable,
+ .disable = tps65912_reg_disable,
+ .set_mode = tps65912_set_mode,
+ .get_mode = tps65912_get_mode,
+ .get_voltage = tps65912_get_voltage_dcdc,
+ .set_voltage_sel = tps65912_set_voltage_dcdc,
+ .list_voltage = tps65912_list_voltage_dcdc,
+};
+
+/* Operations permitted on LDOx */
+static struct regulator_ops tps65912_ops_ldo = {
+ .is_enabled = tps65912_reg_is_enabled,
+ .enable = tps65912_reg_enable,
+ .disable = tps65912_reg_disable,
+ .get_voltage = tps65912_get_voltage_ldo,
+ .set_voltage_sel = tps65912_set_voltage_ldo,
+ .list_voltage = tps65912_list_voltage_ldo,
+};
+
+static __devinit int tps65912_probe(struct platform_device *pdev)
+{
+ struct tps65912 *tps65912 = dev_get_drvdata(pdev->dev.parent);
+ struct tps_info *info;
+ struct regulator_init_data *reg_data;
+ struct regulator_dev *rdev;
+ struct tps65912_reg *pmic;
+ struct tps65912_board *pmic_plat_data;
+ int i, err;
+
+ pmic_plat_data = dev_get_platdata(tps65912->dev);
+ if (!pmic_plat_data)
+ return -EINVAL;
+
+ reg_data = pmic_plat_data->tps65912_pmic_init_data;
+
+ pmic = kzalloc(sizeof(*pmic), GFP_KERNEL);
+ if (!pmic)
+ return -ENOMEM;
+
+ mutex_init(&pmic->io_lock);
+ pmic->mfd = tps65912;
+ platform_set_drvdata(pdev, pmic);
+
+ pmic->get_ctrl_reg = &tps65912_get_ctrl_register;
+ info = tps65912_regs;
+
+ for (i = 0; i < TPS65912_NUM_REGULATOR; i++, info++, reg_data++) {
+ int range = 0;
+ /* Register the regulators */
+ pmic->info[i] = info;
+
+ pmic->desc[i].name = info->name;
+ pmic->desc[i].id = i;
+ pmic->desc[i].n_voltages = 64;
+ pmic->desc[i].ops = (i > TPS65912_REG_DCDC4 ?
+ &tps65912_ops_ldo : &tps65912_ops_dcdc);
+ pmic->desc[i].type = REGULATOR_VOLTAGE;
+ pmic->desc[i].owner = THIS_MODULE;
+ range = tps65912_get_range(pmic, i);
+ rdev = regulator_register(&pmic->desc[i],
+ tps65912->dev, reg_data, pmic);
+ if (IS_ERR(rdev)) {
+ dev_err(tps65912->dev,
+ "failed to register %s regulator\n",
+ pdev->name);
+ err = PTR_ERR(rdev);
+ goto err;
+ }
+
+ /* Save regulator for cleanup */
+ pmic->rdev[i] = rdev;
+ }
+ return 0;
+
+err:
+ while (--i >= 0)
+ regulator_unregister(pmic->rdev[i]);
+
+ kfree(pmic);
+ return err;
+}
+
+static int __devexit tps65912_remove(struct platform_device *pdev)
+{
+ struct tps65912_reg *tps65912_reg = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < TPS65912_NUM_REGULATOR; i++)
+ regulator_unregister(tps65912_reg->rdev[i]);
+
+ kfree(tps65912_reg);
+ return 0;
+}
+
+static struct platform_driver tps65912_driver = {
+ .driver = {
+ .name = "tps65912-pmic",
+ .owner = THIS_MODULE,
+ },
+ .probe = tps65912_probe,
+ .remove = __devexit_p(tps65912_remove),
+};
+
+/**
+ * tps65912_init
+ *
+ * Module init function
+ */
+static int __init tps65912_init(void)
+{
+ return platform_driver_register(&tps65912_driver);
+}
+subsys_initcall(tps65912_init);
+
+/**
+ * tps65912_cleanup
+ *
+ * Module exit function
+ */
+static void __exit tps65912_cleanup(void)
+{
+ platform_driver_unregister(&tps65912_driver);
+}
+module_exit(tps65912_cleanup);
+
+MODULE_AUTHOR("Margarita Olaya Cabrera <magi@slimlogic.co.uk>");
+MODULE_DESCRIPTION("TPS65912 voltage regulator driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tps65912-pmic");
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 1e54b8b..69407e7 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -335,6 +335,13 @@ config BACKLIGHT_PCF50633
If you have a backlight driven by a NXP PCF50633 MFD, say Y here to
enable its driver.
+config BACKLIGHT_AAT2870
+ bool "AnalogicTech AAT2870 Backlight"
+ depends on BACKLIGHT_CLASS_DEVICE && MFD_AAT2870_CORE
+ help
+ If you have a AnalogicTech AAT2870 say Y to enable the
+ backlight driver.
+
endif # BACKLIGHT_CLASS_DEVICE
endif # BACKLIGHT_LCD_SUPPORT
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index bf1dd92..fdd1fc4 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -38,4 +38,5 @@ obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o
obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o
obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
+obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o
diff --git a/drivers/video/backlight/aat2870_bl.c b/drivers/video/backlight/aat2870_bl.c
new file mode 100644
index 0000000..4952a61
--- /dev/null
+++ b/drivers/video/backlight/aat2870_bl.c
@@ -0,0 +1,246 @@
+/*
+ * linux/drivers/video/backlight/aat2870_bl.c
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <jinyoungp@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/mfd/aat2870.h>
+
+struct aat2870_bl_driver_data {
+ struct platform_device *pdev;
+ struct backlight_device *bd;
+
+ int channels;
+ int max_current;
+ int brightness; /* current brightness */
+};
+
+static inline int aat2870_brightness(struct aat2870_bl_driver_data *aat2870_bl,
+ int brightness)
+{
+ struct backlight_device *bd = aat2870_bl->bd;
+ int val;
+
+ val = brightness * aat2870_bl->max_current;
+ val /= bd->props.max_brightness;
+
+ return val;
+}
+
+static inline int aat2870_bl_enable(struct aat2870_bl_driver_data *aat2870_bl)
+{
+ struct aat2870_data *aat2870
+ = dev_get_drvdata(aat2870_bl->pdev->dev.parent);
+
+ return aat2870->write(aat2870, AAT2870_BL_CH_EN,
+ (u8)aat2870_bl->channels);
+}
+
+static inline int aat2870_bl_disable(struct aat2870_bl_driver_data *aat2870_bl)
+{
+ struct aat2870_data *aat2870
+ = dev_get_drvdata(aat2870_bl->pdev->dev.parent);
+
+ return aat2870->write(aat2870, AAT2870_BL_CH_EN, 0x0);
+}
+
+static int aat2870_bl_get_brightness(struct backlight_device *bd)
+{
+ return bd->props.brightness;
+}
+
+static int aat2870_bl_update_status(struct backlight_device *bd)
+{
+ struct aat2870_bl_driver_data *aat2870_bl = dev_get_drvdata(&bd->dev);
+ struct aat2870_data *aat2870 =
+ dev_get_drvdata(aat2870_bl->pdev->dev.parent);
+ int brightness = bd->props.brightness;
+ int ret;
+
+ if ((brightness < 0) || (bd->props.max_brightness < brightness)) {
+ dev_err(&bd->dev, "invalid brightness, %d\n", brightness);
+ return -EINVAL;
+ }
+
+ dev_dbg(&bd->dev, "brightness=%d, power=%d, state=%d\n",
+ bd->props.brightness, bd->props.power, bd->props.state);
+
+ if ((bd->props.power != FB_BLANK_UNBLANK) ||
+ (bd->props.state & BL_CORE_FBBLANK) ||
+ (bd->props.state & BL_CORE_SUSPENDED))
+ brightness = 0;
+
+ ret = aat2870->write(aat2870, AAT2870_BLM,
+ (u8)aat2870_brightness(aat2870_bl, brightness));
+ if (ret < 0)
+ return ret;
+
+ if (brightness == 0) {
+ ret = aat2870_bl_disable(aat2870_bl);
+ if (ret < 0)
+ return ret;
+ } else if (aat2870_bl->brightness == 0) {
+ ret = aat2870_bl_enable(aat2870_bl);
+ if (ret < 0)
+ return ret;
+ }
+
+ aat2870_bl->brightness = brightness;
+
+ return 0;
+}
+
+static int aat2870_bl_check_fb(struct backlight_device *bd, struct fb_info *fi)
+{
+ return 1;
+}
+
+static const struct backlight_ops aat2870_bl_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .get_brightness = aat2870_bl_get_brightness,
+ .update_status = aat2870_bl_update_status,
+ .check_fb = aat2870_bl_check_fb,
+};
+
+static int aat2870_bl_probe(struct platform_device *pdev)
+{
+ struct aat2870_bl_platform_data *pdata = pdev->dev.platform_data;
+ struct aat2870_bl_driver_data *aat2870_bl;
+ struct backlight_device *bd;
+ struct backlight_properties props;
+ int ret = 0;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "No platform data\n");
+ ret = -ENXIO;
+ goto out;
+ }
+
+ if (pdev->id != AAT2870_ID_BL) {
+ dev_err(&pdev->dev, "Invalid device ID, %d\n", pdev->id);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ aat2870_bl = kzalloc(sizeof(struct aat2870_bl_driver_data), GFP_KERNEL);
+ if (!aat2870_bl) {
+ dev_err(&pdev->dev,
+ "Failed to allocate memory for aat2870 backlight\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+
+ props.type = BACKLIGHT_RAW;
+ bd = backlight_device_register("aat2870-backlight", &pdev->dev,
+ aat2870_bl, &aat2870_bl_ops, &props);
+ if (!bd) {
+ dev_err(&pdev->dev,
+ "Failed allocate memory for backlight device\n");
+ ret = -ENOMEM;
+ goto out_kfree;
+ }
+
+ aat2870_bl->pdev = pdev;
+ platform_set_drvdata(pdev, aat2870_bl);
+
+ aat2870_bl->bd = bd;
+
+ if (pdata->channels > 0)
+ aat2870_bl->channels = pdata->channels;
+ else
+ aat2870_bl->channels = AAT2870_BL_CH_ALL;
+
+ if (pdata->max_brightness > 0)
+ aat2870_bl->max_current = pdata->max_current;
+ else
+ aat2870_bl->max_current = AAT2870_CURRENT_27_9;
+
+ if (pdata->max_brightness > 0)
+ bd->props.max_brightness = pdata->max_brightness;
+ else
+ bd->props.max_brightness = 255;
+
+ aat2870_bl->brightness = 0;
+ bd->props.power = FB_BLANK_UNBLANK;
+ bd->props.brightness = bd->props.max_brightness;
+
+ ret = aat2870_bl_update_status(bd);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to initialize\n");
+ goto out_bl_dev_unregister;
+ }
+
+ return 0;
+
+out_bl_dev_unregister:
+ backlight_device_unregister(bd);
+out_kfree:
+ kfree(aat2870_bl);
+out:
+ return ret;
+}
+
+static int aat2870_bl_remove(struct platform_device *pdev)
+{
+ struct aat2870_bl_driver_data *aat2870_bl = platform_get_drvdata(pdev);
+ struct backlight_device *bd = aat2870_bl->bd;
+
+ bd->props.power = FB_BLANK_POWERDOWN;
+ bd->props.brightness = 0;
+ backlight_update_status(bd);
+
+ backlight_device_unregister(bd);
+ kfree(aat2870_bl);
+
+ return 0;
+}
+
+static struct platform_driver aat2870_bl_driver = {
+ .driver = {
+ .name = "aat2870-backlight",
+ .owner = THIS_MODULE,
+ },
+ .probe = aat2870_bl_probe,
+ .remove = aat2870_bl_remove,
+};
+
+static int __init aat2870_bl_init(void)
+{
+ return platform_driver_register(&aat2870_bl_driver);
+}
+subsys_initcall(aat2870_bl_init);
+
+static void __exit aat2870_bl_exit(void)
+{
+ platform_driver_unregister(&aat2870_bl_driver);
+}
+module_exit(aat2870_bl_exit);
+
+MODULE_DESCRIPTION("AnalogicTech AAT2870 Backlight");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jin Park <jinyoungp@nvidia.com>");
diff --git a/include/linux/mfd/aat2870.h b/include/linux/mfd/aat2870.h
new file mode 100644
index 0000000..89212df
--- /dev/null
+++ b/include/linux/mfd/aat2870.h
@@ -0,0 +1,181 @@
+/*
+ * linux/include/linux/mfd/aat2870.h
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <jinyoungp@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_MFD_AAT2870_H
+#define __LINUX_MFD_AAT2870_H
+
+#include <linux/debugfs.h>
+#include <linux/i2c.h>
+
+/* Register offsets */
+#define AAT2870_BL_CH_EN 0x00
+#define AAT2870_BLM 0x01
+#define AAT2870_BLS 0x02
+#define AAT2870_BL1 0x03
+#define AAT2870_BL2 0x04
+#define AAT2870_BL3 0x05
+#define AAT2870_BL4 0x06
+#define AAT2870_BL5 0x07
+#define AAT2870_BL6 0x08
+#define AAT2870_BL7 0x09
+#define AAT2870_BL8 0x0A
+#define AAT2870_FLR 0x0B
+#define AAT2870_FM 0x0C
+#define AAT2870_FS 0x0D
+#define AAT2870_ALS_CFG0 0x0E
+#define AAT2870_ALS_CFG1 0x0F
+#define AAT2870_ALS_CFG2 0x10
+#define AAT2870_AMB 0x11
+#define AAT2870_ALS0 0x12
+#define AAT2870_ALS1 0x13
+#define AAT2870_ALS2 0x14
+#define AAT2870_ALS3 0x15
+#define AAT2870_ALS4 0x16
+#define AAT2870_ALS5 0x17
+#define AAT2870_ALS6 0x18
+#define AAT2870_ALS7 0x19
+#define AAT2870_ALS8 0x1A
+#define AAT2870_ALS9 0x1B
+#define AAT2870_ALSA 0x1C
+#define AAT2870_ALSB 0x1D
+#define AAT2870_ALSC 0x1E
+#define AAT2870_ALSD 0x1F
+#define AAT2870_ALSE 0x20
+#define AAT2870_ALSF 0x21
+#define AAT2870_SUB_SET 0x22
+#define AAT2870_SUB_CTRL 0x23
+#define AAT2870_LDO_AB 0x24
+#define AAT2870_LDO_CD 0x25
+#define AAT2870_LDO_EN 0x26
+#define AAT2870_REG_NUM 0x27
+
+/* Device IDs */
+enum aat2870_id {
+ AAT2870_ID_BL,
+ AAT2870_ID_LDOA,
+ AAT2870_ID_LDOB,
+ AAT2870_ID_LDOC,
+ AAT2870_ID_LDOD
+};
+
+/* Backlight channels */
+#define AAT2870_BL_CH1 0x01
+#define AAT2870_BL_CH2 0x02
+#define AAT2870_BL_CH3 0x04
+#define AAT2870_BL_CH4 0x08
+#define AAT2870_BL_CH5 0x10
+#define AAT2870_BL_CH6 0x20
+#define AAT2870_BL_CH7 0x40
+#define AAT2870_BL_CH8 0x80
+#define AAT2870_BL_CH_ALL 0xFF
+
+/* Backlight current magnitude (mA) */
+enum aat2870_current {
+ AAT2870_CURRENT_0_45,
+ AAT2870_CURRENT_0_90,
+ AAT2870_CURRENT_1_80,
+ AAT2870_CURRENT_2_70,
+ AAT2870_CURRENT_3_60,
+ AAT2870_CURRENT_4_50,
+ AAT2870_CURRENT_5_40,
+ AAT2870_CURRENT_6_30,
+ AAT2870_CURRENT_7_20,
+ AAT2870_CURRENT_8_10,
+ AAT2870_CURRENT_9_00,
+ AAT2870_CURRENT_9_90,
+ AAT2870_CURRENT_10_8,
+ AAT2870_CURRENT_11_7,
+ AAT2870_CURRENT_12_6,
+ AAT2870_CURRENT_13_5,
+ AAT2870_CURRENT_14_4,
+ AAT2870_CURRENT_15_3,
+ AAT2870_CURRENT_16_2,
+ AAT2870_CURRENT_17_1,
+ AAT2870_CURRENT_18_0,
+ AAT2870_CURRENT_18_9,
+ AAT2870_CURRENT_19_8,
+ AAT2870_CURRENT_20_7,
+ AAT2870_CURRENT_21_6,
+ AAT2870_CURRENT_22_5,
+ AAT2870_CURRENT_23_4,
+ AAT2870_CURRENT_24_3,
+ AAT2870_CURRENT_25_2,
+ AAT2870_CURRENT_26_1,
+ AAT2870_CURRENT_27_0,
+ AAT2870_CURRENT_27_9
+};
+
+struct aat2870_register {
+ bool readable;
+ bool writeable;
+ u8 value;
+};
+
+struct aat2870_data {
+ struct device *dev;
+ struct i2c_client *client;
+
+ struct mutex io_lock;
+ struct aat2870_register *reg_cache; /* register cache */
+ int en_pin; /* enable GPIO pin (if < 0, ignore this value) */
+ bool is_enable;
+
+ /* init and uninit for platform specified */
+ int (*init)(struct aat2870_data *aat2870);
+ void (*uninit)(struct aat2870_data *aat2870);
+
+ /* i2c io funcntions */
+ int (*read)(struct aat2870_data *aat2870, u8 addr, u8 *val);
+ int (*write)(struct aat2870_data *aat2870, u8 addr, u8 val);
+ int (*update)(struct aat2870_data *aat2870, u8 addr, u8 mask, u8 val);
+
+ /* for debugfs */
+ struct dentry *dentry_root;
+ struct dentry *dentry_reg;
+};
+
+struct aat2870_subdev_info {
+ int id;
+ const char *name;
+ void *platform_data;
+};
+
+struct aat2870_platform_data {
+ int en_pin; /* enable GPIO pin (if < 0, ignore this value) */
+
+ struct aat2870_subdev_info *subdevs;
+ int num_subdevs;
+
+ /* init and uninit for platform specified */
+ int (*init)(struct aat2870_data *aat2870);
+ void (*uninit)(struct aat2870_data *aat2870);
+};
+
+struct aat2870_bl_platform_data {
+ /* backlight channels, default is AAT2870_BL_CH_ALL */
+ int channels;
+ /* backlight current magnitude, default is AAT2870_CURRENT_27_9 */
+ int max_current;
+ /* maximum brightness, default is 255 */
+ int max_brightness;
+};
+
+#endif /* __LINUX_MFD_AAT2870_H */
diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h
index b318430..838c6b4 100644
--- a/include/linux/mfd/ab8500.h
+++ b/include/linux/mfd/ab8500.h
@@ -28,6 +28,7 @@
#define AB8500_INTERRUPT 0xE
#define AB8500_RTC 0xF
#define AB8500_MISC 0x10
+#define AB8500_DEVELOPMENT 0x11
#define AB8500_DEBUG 0x12
#define AB8500_PROD_TEST 0x13
#define AB8500_OTP_EMUL 0x15
@@ -74,13 +75,6 @@
#define AB8500_INT_ACC_DETECT_21DB_F 37
#define AB8500_INT_ACC_DETECT_21DB_R 38
#define AB8500_INT_GP_SW_ADC_CONV_END 39
-#define AB8500_INT_ACC_DETECT_1DB_F 33
-#define AB8500_INT_ACC_DETECT_1DB_R 34
-#define AB8500_INT_ACC_DETECT_22DB_F 35
-#define AB8500_INT_ACC_DETECT_22DB_R 36
-#define AB8500_INT_ACC_DETECT_21DB_F 37
-#define AB8500_INT_ACC_DETECT_21DB_R 38
-#define AB8500_INT_GP_SW_ADC_CONV_END 39
#define AB8500_INT_GPIO6R 40
#define AB8500_INT_GPIO7R 41
#define AB8500_INT_GPIO8R 42
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index e762c27..be1af7c 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -57,6 +57,7 @@ struct stmpe_variant_info;
* @irq_lock: IRQ bus lock
* @dev: device, mostly for dev_dbg()
* @i2c: i2c client
+ * @partnum: part number
* @variant: the detected STMPE model number
* @regs: list of addresses of registers which are at different addresses on
* different variants. Indexed by one of STMPE_IDX_*.
@@ -121,6 +122,8 @@ struct stmpe_keypad_platform_data {
* @norequest_mask: bitmask specifying which GPIOs should _not_ be
* requestable due to different usage (e.g. touch, keypad)
* STMPE_GPIO_NOREQ_* macros can be used here.
+ * @setup: board specific setup callback.
+ * @remove: board specific remove callback
*/
struct stmpe_gpio_platform_data {
int gpio_base;
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index 73572c6..82b4c88 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -791,6 +791,7 @@ int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask);
void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base);
int tps65910_irq_init(struct tps65910 *tps65910, int irq,
struct tps65910_platform_data *pdata);
+int tps65910_irq_exit(struct tps65910 *tps65910);
static inline int tps65910_chip_id(struct tps65910 *tps65910)
{
diff --git a/include/linux/mfd/tps65912.h b/include/linux/mfd/tps65912.h
new file mode 100644
index 0000000..aaceab4
--- /dev/null
+++ b/include/linux/mfd/tps65912.h
@@ -0,0 +1,327 @@
+/*
+ * tps65912.h -- TI TPS6591x
+ *
+ * Copyright 2011 Texas Instruments Inc.
+ *
+ * Author: Margarita Olaya <magi@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MFD_TPS65912_H
+#define __LINUX_MFD_TPS65912_H
+
+/* TPS regulator type list */
+#define REGULATOR_LDO 0
+#define REGULATOR_DCDC 1
+
+/*
+ * List of registers for TPS65912
+ */
+
+#define TPS65912_DCDC1_CTRL 0x00
+#define TPS65912_DCDC2_CTRL 0x01
+#define TPS65912_DCDC3_CTRL 0x02
+#define TPS65912_DCDC4_CTRL 0x03
+#define TPS65912_DCDC1_OP 0x04
+#define TPS65912_DCDC1_AVS 0x05
+#define TPS65912_DCDC1_LIMIT 0x06
+#define TPS65912_DCDC2_OP 0x07
+#define TPS65912_DCDC2_AVS 0x08
+#define TPS65912_DCDC2_LIMIT 0x09
+#define TPS65912_DCDC3_OP 0x0A
+#define TPS65912_DCDC3_AVS 0x0B
+#define TPS65912_DCDC3_LIMIT 0x0C
+#define TPS65912_DCDC4_OP 0x0D
+#define TPS65912_DCDC4_AVS 0x0E
+#define TPS65912_DCDC4_LIMIT 0x0F
+#define TPS65912_LDO1_OP 0x10
+#define TPS65912_LDO1_AVS 0x11
+#define TPS65912_LDO1_LIMIT 0x12
+#define TPS65912_LDO2_OP 0x13
+#define TPS65912_LDO2_AVS 0x14
+#define TPS65912_LDO2_LIMIT 0x15
+#define TPS65912_LDO3_OP 0x16
+#define TPS65912_LDO3_AVS 0x17
+#define TPS65912_LDO3_LIMIT 0x18
+#define TPS65912_LDO4_OP 0x19
+#define TPS65912_LDO4_AVS 0x1A
+#define TPS65912_LDO4_LIMIT 0x1B
+#define TPS65912_LDO5 0x1C
+#define TPS65912_LDO6 0x1D
+#define TPS65912_LDO7 0x1E
+#define TPS65912_LDO8 0x1F
+#define TPS65912_LDO9 0x20
+#define TPS65912_LDO10 0x21
+#define TPS65912_THRM 0x22
+#define TPS65912_CLK32OUT 0x23
+#define TPS65912_DEVCTRL 0x24
+#define TPS65912_DEVCTRL2 0x25
+#define TPS65912_I2C_SPI_CFG 0x26
+#define TPS65912_KEEP_ON 0x27
+#define TPS65912_KEEP_ON2 0x28
+#define TPS65912_SET_OFF1 0x29
+#define TPS65912_SET_OFF2 0x2A
+#define TPS65912_DEF_VOLT 0x2B
+#define TPS65912_DEF_VOLT_MAPPING 0x2C
+#define TPS65912_DISCHARGE 0x2D
+#define TPS65912_DISCHARGE2 0x2E
+#define TPS65912_EN1_SET1 0x2F
+#define TPS65912_EN1_SET2 0x30
+#define TPS65912_EN2_SET1 0x31
+#define TPS65912_EN2_SET2 0x32
+#define TPS65912_EN3_SET1 0x33
+#define TPS65912_EN3_SET2 0x34
+#define TPS65912_EN4_SET1 0x35
+#define TPS65912_EN4_SET2 0x36
+#define TPS65912_PGOOD 0x37
+#define TPS65912_PGOOD2 0x38
+#define TPS65912_INT_STS 0x39
+#define TPS65912_INT_MSK 0x3A
+#define TPS65912_INT_STS2 0x3B
+#define TPS65912_INT_MSK2 0x3C
+#define TPS65912_INT_STS3 0x3D
+#define TPS65912_INT_MSK3 0x3E
+#define TPS65912_INT_STS4 0x3F
+#define TPS65912_INT_MSK4 0x40
+#define TPS65912_GPIO1 0x41
+#define TPS65912_GPIO2 0x42
+#define TPS65912_GPIO3 0x43
+#define TPS65912_GPIO4 0x44
+#define TPS65912_GPIO5 0x45
+#define TPS65912_VMON 0x46
+#define TPS65912_LEDA_CTRL1 0x47
+#define TPS65912_LEDA_CTRL2 0x48
+#define TPS65912_LEDA_CTRL3 0x49
+#define TPS65912_LEDA_CTRL4 0x4A
+#define TPS65912_LEDA_CTRL5 0x4B
+#define TPS65912_LEDA_CTRL6 0x4C
+#define TPS65912_LEDA_CTRL7 0x4D
+#define TPS65912_LEDA_CTRL8 0x4E
+#define TPS65912_LEDB_CTRL1 0x4F
+#define TPS65912_LEDB_CTRL2 0x50
+#define TPS65912_LEDB_CTRL3 0x51
+#define TPS65912_LEDB_CTRL4 0x52
+#define TPS65912_LEDB_CTRL5 0x53
+#define TPS65912_LEDB_CTRL6 0x54
+#define TPS65912_LEDB_CTRL7 0x55
+#define TPS65912_LEDB_CTRL8 0x56
+#define TPS65912_LEDC_CTRL1 0x57
+#define TPS65912_LEDC_CTRL2 0x58
+#define TPS65912_LEDC_CTRL3 0x59
+#define TPS65912_LEDC_CTRL4 0x5A
+#define TPS65912_LEDC_CTRL5 0x5B
+#define TPS65912_LEDC_CTRL6 0x5C
+#define TPS65912_LEDC_CTRL7 0x5D
+#define TPS65912_LEDC_CTRL8 0x5E
+#define TPS65912_LED_RAMP_UP_TIME 0x5F
+#define TPS65912_LED_RAMP_DOWN_TIME 0x60
+#define TPS65912_LED_SEQ_EN 0x61
+#define TPS65912_LOADSWITCH 0x62
+#define TPS65912_SPARE 0x63
+#define TPS65912_VERNUM 0x64
+#define TPS6591X_MAX_REGISTER 0x64
+
+/* IRQ Definitions */
+#define TPS65912_IRQ_PWRHOLD_F 0
+#define TPS65912_IRQ_VMON 1
+#define TPS65912_IRQ_PWRON 2
+#define TPS65912_IRQ_PWRON_LP 3
+#define TPS65912_IRQ_PWRHOLD_R 4
+#define TPS65912_IRQ_HOTDIE 5
+#define TPS65912_IRQ_GPIO1_R 6
+#define TPS65912_IRQ_GPIO1_F 7
+#define TPS65912_IRQ_GPIO2_R 8
+#define TPS65912_IRQ_GPIO2_F 9
+#define TPS65912_IRQ_GPIO3_R 10
+#define TPS65912_IRQ_GPIO3_F 11
+#define TPS65912_IRQ_GPIO4_R 12
+#define TPS65912_IRQ_GPIO4_F 13
+#define TPS65912_IRQ_GPIO5_R 14
+#define TPS65912_IRQ_GPIO5_F 15
+#define TPS65912_IRQ_PGOOD_DCDC1 16
+#define TPS65912_IRQ_PGOOD_DCDC2 17
+#define TPS65912_IRQ_PGOOD_DCDC3 18
+#define TPS65912_IRQ_PGOOD_DCDC4 19
+#define TPS65912_IRQ_PGOOD_LDO1 20
+#define TPS65912_IRQ_PGOOD_LDO2 21
+#define TPS65912_IRQ_PGOOD_LDO3 22
+#define TPS65912_IRQ_PGOOD_LDO4 23
+#define TPS65912_IRQ_PGOOD_LDO5 24
+#define TPS65912_IRQ_PGOOD_LDO6 25
+#define TPS65912_IRQ_PGOOD_LDO7 26
+#define TPS65912_IRQ_PGOOD_LD08 27
+#define TPS65912_IRQ_PGOOD_LDO9 28
+#define TPS65912_IRQ_PGOOD_LDO10 29
+
+#define TPS65912_NUM_IRQ 30
+
+/* GPIO 1 and 2 Register Definitions */
+#define GPIO_SLEEP_MASK 0x80
+#define GPIO_SLEEP_SHIFT 7
+#define GPIO_DEB_MASK 0x10
+#define GPIO_DEB_SHIFT 4
+#define GPIO_CFG_MASK 0x04
+#define GPIO_CFG_SHIFT 2
+#define GPIO_STS_MASK 0x02
+#define GPIO_STS_SHIFT 1
+#define GPIO_SET_MASK 0x01
+#define GPIO_SET_SHIFT 0
+
+/* GPIO 3 Register Definitions */
+#define GPIO3_SLEEP_MASK 0x80
+#define GPIO3_SLEEP_SHIFT 7
+#define GPIO3_SEL_MASK 0x40
+#define GPIO3_SEL_SHIFT 6
+#define GPIO3_ODEN_MASK 0x20
+#define GPIO3_ODEN_SHIFT 5
+#define GPIO3_DEB_MASK 0x10
+#define GPIO3_DEB_SHIFT 4
+#define GPIO3_PDEN_MASK 0x08
+#define GPIO3_PDEN_SHIFT 3
+#define GPIO3_CFG_MASK 0x04
+#define GPIO3_CFG_SHIFT 2
+#define GPIO3_STS_MASK 0x02
+#define GPIO3_STS_SHIFT 1
+#define GPIO3_SET_MASK 0x01
+#define GPIO3_SET_SHIFT 0
+
+/* GPIO 4 Register Definitions */
+#define GPIO4_SLEEP_MASK 0x80
+#define GPIO4_SLEEP_SHIFT 7
+#define GPIO4_SEL_MASK 0x40
+#define GPIO4_SEL_SHIFT 6
+#define GPIO4_ODEN_MASK 0x20
+#define GPIO4_ODEN_SHIFT 5
+#define GPIO4_DEB_MASK 0x10
+#define GPIO4_DEB_SHIFT 4
+#define GPIO4_PDEN_MASK 0x08
+#define GPIO4_PDEN_SHIFT 3
+#define GPIO4_CFG_MASK 0x04
+#define GPIO4_CFG_SHIFT 2
+#define GPIO4_STS_MASK 0x02
+#define GPIO4_STS_SHIFT 1
+#define GPIO4_SET_MASK 0x01
+#define GPIO4_SET_SHIFT 0
+
+/* Register THERM (0x80) register.RegisterDescription */
+#define THERM_THERM_HD_MASK 0x20
+#define THERM_THERM_HD_SHIFT 5
+#define THERM_THERM_TS_MASK 0x10
+#define THERM_THERM_TS_SHIFT 4
+#define THERM_THERM_HDSEL_MASK 0x0C
+#define THERM_THERM_HDSEL_SHIFT 2
+#define THERM_RSVD1_MASK 0x02
+#define THERM_RSVD1_SHIFT 1
+#define THERM_THERM_STATE_MASK 0x01
+#define THERM_THERM_STATE_SHIFT 0
+
+/* Register DCDCCTRL1 register.RegisterDescription */
+#define DCDCCTRL_VCON_ENABLE_MASK 0x80
+#define DCDCCTRL_VCON_ENABLE_SHIFT 7
+#define DCDCCTRL_VCON_RANGE1_MASK 0x40
+#define DCDCCTRL_VCON_RANGE1_SHIFT 6
+#define DCDCCTRL_VCON_RANGE0_MASK 0x20
+#define DCDCCTRL_VCON_RANGE0_SHIFT 5
+#define DCDCCTRL_TSTEP2_MASK 0x10
+#define DCDCCTRL_TSTEP2_SHIFT 4
+#define DCDCCTRL_TSTEP1_MASK 0x08
+#define DCDCCTRL_TSTEP1_SHIFT 3
+#define DCDCCTRL_TSTEP0_MASK 0x04
+#define DCDCCTRL_TSTEP0_SHIFT 2
+#define DCDCCTRL_DCDC1_MODE_MASK 0x02
+#define DCDCCTRL_DCDC1_MODE_SHIFT 1
+
+/* Register DCDCCTRL2 and DCDCCTRL3 register.RegisterDescription */
+#define DCDCCTRL_TSTEP2_MASK 0x10
+#define DCDCCTRL_TSTEP2_SHIFT 4
+#define DCDCCTRL_TSTEP1_MASK 0x08
+#define DCDCCTRL_TSTEP1_SHIFT 3
+#define DCDCCTRL_TSTEP0_MASK 0x04
+#define DCDCCTRL_TSTEP0_SHIFT 2
+#define DCDCCTRL_DCDC_MODE_MASK 0x02
+#define DCDCCTRL_DCDC_MODE_SHIFT 1
+#define DCDCCTRL_RSVD0_MASK 0x01
+#define DCDCCTRL_RSVD0_SHIFT 0
+
+/* Register DCDCCTRL4 register.RegisterDescription */
+#define DCDCCTRL_RAMP_TIME_MASK 0x01
+#define DCDCCTRL_RAMP_TIME_SHIFT 0
+
+/* Register DCDCx_AVS */
+#define DCDC_AVS_ENABLE_MASK 0x80
+#define DCDC_AVS_ENABLE_SHIFT 7
+#define DCDC_AVS_ECO_MASK 0x40
+#define DCDC_AVS_ECO_SHIFT 6
+
+/* Register DCDCx_LIMIT */
+#define DCDC_LIMIT_RANGE_MASK 0xC0
+#define DCDC_LIMIT_RANGE_SHIFT 6
+#define DCDC_LIMIT_MAX_SEL_MASK 0x3F
+#define DCDC_LIMIT_MAX_SEL_SHIFT 0
+
+/**
+ * struct tps65912_board
+ * Board platform dat may be used to initialize regulators.
+ */
+struct tps65912_board {
+ int is_dcdc1_avs;
+ int is_dcdc2_avs;
+ int is_dcdc3_avs;
+ int is_dcdc4_avs;
+ int irq;
+ int irq_base;
+ int gpio_base;
+ struct regulator_init_data *tps65912_pmic_init_data;
+};
+
+/**
+ * struct tps65912 - tps65912 sub-driver chip access routines
+ */
+
+struct tps65912 {
+ struct device *dev;
+ /* for read/write acces */
+ struct mutex io_mutex;
+
+ /* For device IO interfaces: I2C or SPI */
+ void *control_data;
+
+ int (*read)(struct tps65912 *tps65912, u8 reg, int size, void *dest);
+ int (*write)(struct tps65912 *tps65912, u8 reg, int size, void *src);
+
+ /* Client devices */
+ struct tps65912_pmic *pmic;
+
+ /* GPIO Handling */
+ struct gpio_chip gpio;
+
+ /* IRQ Handling */
+ struct mutex irq_lock;
+ int chip_irq;
+ int irq_base;
+ int irq_num;
+ u32 irq_mask;
+};
+
+struct tps65912_platform_data {
+ int irq;
+ int irq_base;
+};
+
+unsigned int tps_chip(void);
+
+int tps65912_set_bits(struct tps65912 *tps65912, u8 reg, u8 mask);
+int tps65912_clear_bits(struct tps65912 *tps65912, u8 reg, u8 mask);
+int tps65912_reg_read(struct tps65912 *tps65912, u8 reg);
+int tps65912_reg_write(struct tps65912 *tps65912, u8 reg, u8 val);
+int tps65912_device_init(struct tps65912 *tps65912);
+void tps65912_device_exit(struct tps65912 *tps65912);
+int tps65912_irq_init(struct tps65912 *tps65912, int irq,
+ struct tps65912_platform_data *pdata);
+
+#endif /* __LINUX_MFD_TPS65912_H */
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index 0d515ee..8dda8de 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -17,6 +17,7 @@
#include <linux/completion.h>
#include <linux/interrupt.h>
+#include <linux/list.h>
/*
* Register values.
@@ -234,9 +235,111 @@
#define WM831X_ON_PIN_TO_SHIFT 0 /* ON_PIN_TO - [1:0] */
#define WM831X_ON_PIN_TO_WIDTH 2 /* ON_PIN_TO - [1:0] */
+/*
+ * R16528 (0x4090) - Clock Control 1
+ */
+#define WM831X_CLKOUT_ENA 0x8000 /* CLKOUT_ENA */
+#define WM831X_CLKOUT_ENA_MASK 0x8000 /* CLKOUT_ENA */
+#define WM831X_CLKOUT_ENA_SHIFT 15 /* CLKOUT_ENA */
+#define WM831X_CLKOUT_ENA_WIDTH 1 /* CLKOUT_ENA */
+#define WM831X_CLKOUT_OD 0x2000 /* CLKOUT_OD */
+#define WM831X_CLKOUT_OD_MASK 0x2000 /* CLKOUT_OD */
+#define WM831X_CLKOUT_OD_SHIFT 13 /* CLKOUT_OD */
+#define WM831X_CLKOUT_OD_WIDTH 1 /* CLKOUT_OD */
+#define WM831X_CLKOUT_SLOT_MASK 0x0700 /* CLKOUT_SLOT - [10:8] */
+#define WM831X_CLKOUT_SLOT_SHIFT 8 /* CLKOUT_SLOT - [10:8] */
+#define WM831X_CLKOUT_SLOT_WIDTH 3 /* CLKOUT_SLOT - [10:8] */
+#define WM831X_CLKOUT_SLPSLOT_MASK 0x0070 /* CLKOUT_SLPSLOT - [6:4] */
+#define WM831X_CLKOUT_SLPSLOT_SHIFT 4 /* CLKOUT_SLPSLOT - [6:4] */
+#define WM831X_CLKOUT_SLPSLOT_WIDTH 3 /* CLKOUT_SLPSLOT - [6:4] */
+#define WM831X_CLKOUT_SRC 0x0001 /* CLKOUT_SRC */
+#define WM831X_CLKOUT_SRC_MASK 0x0001 /* CLKOUT_SRC */
+#define WM831X_CLKOUT_SRC_SHIFT 0 /* CLKOUT_SRC */
+#define WM831X_CLKOUT_SRC_WIDTH 1 /* CLKOUT_SRC */
+
+/*
+ * R16529 (0x4091) - Clock Control 2
+ */
+#define WM831X_XTAL_INH 0x8000 /* XTAL_INH */
+#define WM831X_XTAL_INH_MASK 0x8000 /* XTAL_INH */
+#define WM831X_XTAL_INH_SHIFT 15 /* XTAL_INH */
+#define WM831X_XTAL_INH_WIDTH 1 /* XTAL_INH */
+#define WM831X_XTAL_ENA 0x2000 /* XTAL_ENA */
+#define WM831X_XTAL_ENA_MASK 0x2000 /* XTAL_ENA */
+#define WM831X_XTAL_ENA_SHIFT 13 /* XTAL_ENA */
+#define WM831X_XTAL_ENA_WIDTH 1 /* XTAL_ENA */
+#define WM831X_XTAL_BKUPENA 0x1000 /* XTAL_BKUPENA */
+#define WM831X_XTAL_BKUPENA_MASK 0x1000 /* XTAL_BKUPENA */
+#define WM831X_XTAL_BKUPENA_SHIFT 12 /* XTAL_BKUPENA */
+#define WM831X_XTAL_BKUPENA_WIDTH 1 /* XTAL_BKUPENA */
+#define WM831X_FLL_AUTO 0x0080 /* FLL_AUTO */
+#define WM831X_FLL_AUTO_MASK 0x0080 /* FLL_AUTO */
+#define WM831X_FLL_AUTO_SHIFT 7 /* FLL_AUTO */
+#define WM831X_FLL_AUTO_WIDTH 1 /* FLL_AUTO */
+#define WM831X_FLL_AUTO_FREQ_MASK 0x0007 /* FLL_AUTO_FREQ - [2:0] */
+#define WM831X_FLL_AUTO_FREQ_SHIFT 0 /* FLL_AUTO_FREQ - [2:0] */
+#define WM831X_FLL_AUTO_FREQ_WIDTH 3 /* FLL_AUTO_FREQ - [2:0] */
+
+/*
+ * R16530 (0x4092) - FLL Control 1
+ */
+#define WM831X_FLL_FRAC 0x0004 /* FLL_FRAC */
+#define WM831X_FLL_FRAC_MASK 0x0004 /* FLL_FRAC */
+#define WM831X_FLL_FRAC_SHIFT 2 /* FLL_FRAC */
+#define WM831X_FLL_FRAC_WIDTH 1 /* FLL_FRAC */
+#define WM831X_FLL_OSC_ENA 0x0002 /* FLL_OSC_ENA */
+#define WM831X_FLL_OSC_ENA_MASK 0x0002 /* FLL_OSC_ENA */
+#define WM831X_FLL_OSC_ENA_SHIFT 1 /* FLL_OSC_ENA */
+#define WM831X_FLL_OSC_ENA_WIDTH 1 /* FLL_OSC_ENA */
+#define WM831X_FLL_ENA 0x0001 /* FLL_ENA */
+#define WM831X_FLL_ENA_MASK 0x0001 /* FLL_ENA */
+#define WM831X_FLL_ENA_SHIFT 0 /* FLL_ENA */
+#define WM831X_FLL_ENA_WIDTH 1 /* FLL_ENA */
+
+/*
+ * R16531 (0x4093) - FLL Control 2
+ */
+#define WM831X_FLL_OUTDIV_MASK 0x3F00 /* FLL_OUTDIV - [13:8] */
+#define WM831X_FLL_OUTDIV_SHIFT 8 /* FLL_OUTDIV - [13:8] */
+#define WM831X_FLL_OUTDIV_WIDTH 6 /* FLL_OUTDIV - [13:8] */
+#define WM831X_FLL_CTRL_RATE_MASK 0x0070 /* FLL_CTRL_RATE - [6:4] */
+#define WM831X_FLL_CTRL_RATE_SHIFT 4 /* FLL_CTRL_RATE - [6:4] */
+#define WM831X_FLL_CTRL_RATE_WIDTH 3 /* FLL_CTRL_RATE - [6:4] */
+#define WM831X_FLL_FRATIO_MASK 0x0007 /* FLL_FRATIO - [2:0] */
+#define WM831X_FLL_FRATIO_SHIFT 0 /* FLL_FRATIO - [2:0] */
+#define WM831X_FLL_FRATIO_WIDTH 3 /* FLL_FRATIO - [2:0] */
+
+/*
+ * R16532 (0x4094) - FLL Control 3
+ */
+#define WM831X_FLL_K_MASK 0xFFFF /* FLL_K - [15:0] */
+#define WM831X_FLL_K_SHIFT 0 /* FLL_K - [15:0] */
+#define WM831X_FLL_K_WIDTH 16 /* FLL_K - [15:0] */
+
+/*
+ * R16533 (0x4095) - FLL Control 4
+ */
+#define WM831X_FLL_N_MASK 0x7FE0 /* FLL_N - [14:5] */
+#define WM831X_FLL_N_SHIFT 5 /* FLL_N - [14:5] */
+#define WM831X_FLL_N_WIDTH 10 /* FLL_N - [14:5] */
+#define WM831X_FLL_GAIN_MASK 0x000F /* FLL_GAIN - [3:0] */
+#define WM831X_FLL_GAIN_SHIFT 0 /* FLL_GAIN - [3:0] */
+#define WM831X_FLL_GAIN_WIDTH 4 /* FLL_GAIN - [3:0] */
+
+/*
+ * R16534 (0x4096) - FLL Control 5
+ */
+#define WM831X_FLL_CLK_REF_DIV_MASK 0x0018 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM831X_FLL_CLK_REF_DIV_SHIFT 3 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM831X_FLL_CLK_REF_DIV_WIDTH 2 /* FLL_CLK_REF_DIV - [4:3] */
+#define WM831X_FLL_CLK_SRC_MASK 0x0003 /* FLL_CLK_SRC - [1:0] */
+#define WM831X_FLL_CLK_SRC_SHIFT 0 /* FLL_CLK_SRC - [1:0] */
+#define WM831X_FLL_CLK_SRC_WIDTH 2 /* FLL_CLK_SRC - [1:0] */
+
struct regulator_dev;
#define WM831X_NUM_IRQ_REGS 5
+#define WM831X_NUM_GPIO_REGS 16
enum wm831x_parent {
WM8310 = 0x8310,
@@ -248,6 +351,12 @@ enum wm831x_parent {
WM8326 = 0x8326,
};
+struct wm831x;
+enum wm831x_auxadc;
+
+typedef int (*wm831x_auxadc_read_fn)(struct wm831x *wm831x,
+ enum wm831x_auxadc input);
+
struct wm831x {
struct mutex io_lock;
@@ -261,7 +370,7 @@ struct wm831x {
int irq; /* Our chip IRQ */
struct mutex irq_lock;
- unsigned int irq_base;
+ int irq_base;
int irq_masks_cur[WM831X_NUM_IRQ_REGS]; /* Currently active value */
int irq_masks_cache[WM831X_NUM_IRQ_REGS]; /* Cached hardware value */
@@ -272,8 +381,13 @@ struct wm831x {
int num_gpio;
+ /* Used by the interrupt controller code to post writes */
+ int gpio_update[WM831X_NUM_GPIO_REGS];
+
struct mutex auxadc_lock;
- struct completion auxadc_done;
+ struct list_head auxadc_pending;
+ u16 auxadc_active;
+ wm831x_auxadc_read_fn auxadc_read;
/* The WM831x has a security key blocking access to certain
* registers. The mutex is taken by the accessors for locking
@@ -300,5 +414,6 @@ void wm831x_device_exit(struct wm831x *wm831x);
int wm831x_device_suspend(struct wm831x *wm831x);
int wm831x_irq_init(struct wm831x *wm831x, int irq);
void wm831x_irq_exit(struct wm831x *wm831x);
+void wm831x_auxadc_init(struct wm831x *wm831x);
#endif
diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h
index ff42d70..0ba2459 100644
--- a/include/linux/mfd/wm831x/pdata.h
+++ b/include/linux/mfd/wm831x/pdata.h
@@ -120,6 +120,9 @@ struct wm831x_pdata {
/** Put the /IRQ line into CMOS mode */
bool irq_cmos;
+ /** Disable the touchscreen */
+ bool disable_touch;
+
int irq_base;
int gpio_base;
int gpio_defaults[WM831X_GPIO_NUM];
OpenPOWER on IntegriCloud