diff options
200 files changed, 1611 insertions, 6135 deletions
diff --git a/Documentation/arm/Booting b/Documentation/arm/Booting index 7685029..4e686a2 100644 --- a/Documentation/arm/Booting +++ b/Documentation/arm/Booting @@ -65,13 +65,19 @@ looks at the connected hardware is beyond the scope of this document. The boot loader must ultimately be able to provide a MACH_TYPE_xxx value to the kernel. (see linux/arch/arm/tools/mach-types). - -4. Setup the kernel tagged list -------------------------------- +4. Setup boot data +------------------ Existing boot loaders: OPTIONAL, HIGHLY RECOMMENDED New boot loaders: MANDATORY +The boot loader must provide either a tagged list or a dtb image for +passing configuration data to the kernel. The physical address of the +boot data is passed to the kernel in register r2. + +4a. Setup the kernel tagged list +-------------------------------- + The boot loader must create and initialise the kernel tagged list. A valid tagged list starts with ATAG_CORE and ends with ATAG_NONE. The ATAG_CORE tag may or may not be empty. An empty ATAG_CORE tag @@ -101,6 +107,24 @@ The tagged list must be placed in a region of memory where neither the kernel decompressor nor initrd 'bootp' program will overwrite it. The recommended placement is in the first 16KiB of RAM. +4b. Setup the device tree +------------------------- + +The boot loader must load a device tree image (dtb) into system ram +at a 64bit aligned address and initialize it with the boot data. The +dtb format is documented in Documentation/devicetree/booting-without-of.txt. +The kernel will look for the dtb magic value of 0xd00dfeed at the dtb +physical address to determine if a dtb has been passed instead of a +tagged list. + +The boot loader must pass at a minimum the size and location of the +system memory, and the root filesystem location. The dtb must be +placed in a region of memory where the kernel decompressor will not +overwrite it. The recommended placement is in the first 16KiB of RAM +with the caveat that it may not be located at physical address 0 since +the kernel interprets a value of 0 in r2 to mean neither a tagged list +nor a dtb were passed. + 5. Calling the kernel image --------------------------- @@ -125,7 +149,8 @@ In either case, the following conditions must be met: - CPU register settings r0 = 0, r1 = machine type number discovered in (3) above. - r2 = physical address of tagged list in system RAM. + r2 = physical address of tagged list in system RAM, or + physical address of device tree block (dtb) in system RAM - CPU mode All forms of interrupts must be disabled (IRQs and FIQs) diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt index c3094ea..658abb2 100644 --- a/Documentation/arm/Samsung/Overview.txt +++ b/Documentation/arm/Samsung/Overview.txt @@ -14,7 +14,6 @@ Introduction - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list - S3C64XX: S3C6400 and S3C6410 - S5P6440 - - S5P6442 - S5PC100 - S5PC110 / S5PV210 @@ -36,7 +35,6 @@ Configuration unifying all the SoCs into one kernel. s5p6440_defconfig - S5P6440 specific default configuration - s5p6442_defconfig - S5P6442 specific default configuration s5pc100_defconfig - S5PC100 specific default configuration s5pc110_defconfig - S5PC110 specific default configuration s5pv210_defconfig - S5PV210 specific default configuration diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index 50619a0..7c1329d 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -12,8 +12,9 @@ Table of Contents ================= I - Introduction - 1) Entry point for arch/powerpc - 2) Entry point for arch/x86 + 1) Entry point for arch/arm + 2) Entry point for arch/powerpc + 3) Entry point for arch/x86 II - The DT block format 1) Header @@ -148,7 +149,46 @@ upgrades without significantly impacting the kernel code or cluttering it with special cases. -1) Entry point for arch/powerpc +1) Entry point for arch/arm +--------------------------- + + There is one single entry point to the kernel, at the start + of the kernel image. That entry point supports two calling + conventions. A summary of the interface is described here. A full + description of the boot requirements is documented in + Documentation/arm/Booting + + a) ATAGS interface. Minimal information is passed from firmware + to the kernel with a tagged list of predefined parameters. + + r0 : 0 + + r1 : Machine type number + + r2 : Physical address of tagged list in system RAM + + b) Entry with a flattened device-tree block. Firmware loads the + physical address of the flattened device tree block (dtb) into r2, + r1 is not used, but it is considered good practise to use a valid + machine number as described in Documentation/arm/Booting. + + r0 : 0 + + r1 : Valid machine type number. When using a device tree, + a single machine type number will often be assigned to + represent a class or family of SoCs. + + r2 : physical pointer to the device-tree block + (defined in chapter II) in RAM. Device tree can be located + anywhere in system RAM, but it should be aligned on a 64 bit + boundary. + + The kernel will differentiate between ATAGS and device tree booting by + reading the memory pointed to by r2 and looking for either the flattened + device tree block magic value (0xd00dfeed) or the ATAG_CORE value at + offset 0x4 from r2 (0x54410001). + +2) Entry point for arch/powerpc ------------------------------- There is one single entry point to the kernel, at the start @@ -226,7 +266,7 @@ it with special cases. cannot support both configurations with Book E and configurations with classic Powerpc architectures. -2) Entry point for arch/x86 +3) Entry point for arch/x86 ------------------------------- There is one single 32bit entry point to the kernel at code32_start, diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7275009..9adc278 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -294,6 +294,8 @@ config ARCH_AT91 bool "Atmel AT91" select ARCH_REQUIRE_GPIOLIB select HAVE_CLK + select CLKDEV_LOOKUP + select ARM_PATCH_PHYS_VIRT if MMU help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. @@ -730,16 +732,6 @@ config ARCH_S5P64X0 Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, SMDK6450. -config ARCH_S5P6442 - bool "Samsung S5P6442" - select CPU_V6 - select GENERIC_GPIO - select HAVE_CLK - select ARCH_USES_GETTIMEOFFSET - select HAVE_S3C2410_WATCHDOG if WATCHDOG - help - Samsung S5P6442 CPU based systems - config ARCH_S5PC100 bool "Samsung S5PC100" select GENERIC_GPIO @@ -991,8 +983,6 @@ endif source "arch/arm/mach-s5p64x0/Kconfig" -source "arch/arm/mach-s5p6442/Kconfig" - source "arch/arm/mach-s5pc100/Kconfig" source "arch/arm/mach-s5pv210/Kconfig" @@ -1399,7 +1389,6 @@ config NR_CPUS config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" depends on SMP && HOTPLUG && EXPERIMENTAL - depends on !ARCH_MSM help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -1420,7 +1409,7 @@ source kernel/Kconfig.preempt config HZ int default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ - ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4 + ARCH_S5PV210 || ARCH_EXYNOS4 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE @@ -1516,6 +1505,9 @@ config ARCH_SPARSEMEM_DEFAULT config ARCH_SELECT_MEMORY_MODEL def_bool ARCH_SPARSEMEM_ENABLE +config HAVE_ARCH_PFN_VALID + def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM + config HIGHMEM bool "High Memory Support" depends on MMU @@ -1683,6 +1675,13 @@ endmenu menu "Boot options" +config USE_OF + bool "Flattened Device Tree support" + select OF + select OF_EARLY_FLATTREE + help + Include support for flattened device tree machine descriptions. + # Compressed boot loader in ROM. Yes, we really want to ask about # TEXT and BSS so we preserve their values in the config files. config ZBOOT_ROM_TEXT @@ -2021,7 +2020,7 @@ menu "Power management options" source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE - depends on !ARCH_S5P64X0 && !ARCH_S5P6442 && !ARCH_S5PC100 + depends on !ARCH_S5P64X0 && !ARCH_S5PC100 depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \ CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE def_bool y diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 25750bc..f5b2b39 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -176,7 +176,6 @@ machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c24 machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 -machine-$(CONFIG_ARCH_S5P6442) := s5p6442 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 machine-$(CONFIG_ARCH_EXYNOS4) := exynos4 diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index ea5ee4d..4b71766 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -7,7 +7,7 @@ config ARM_VIC config ARM_VIC_NR int default 4 if ARCH_S5PV210 - default 3 if ARCH_S5P6442 || ARCH_S5PC100 + default 3 if ARCH_S5PC100 default 2 depends on ARM_VIC help diff --git a/arch/arm/configs/at572d940hfek_defconfig b/arch/arm/configs/at572d940hfek_defconfig deleted file mode 100644 index 1b1158a..0000000 --- a/arch/arm/configs/at572d940hfek_defconfig +++ /dev/null @@ -1,358 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_LOCALVERSION="-AT572D940HF" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_AUDIT=y -CONFIG_CGROUPS=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_SCHED=y -CONFIG_RT_GROUP_SCHED=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT572D940HF=y -CONFIG_MACH_AT572D940HFEB=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181" -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -CONFIG_NET=y -CONFIG_PACKET=m -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_NET_PKTGEN=m -CONFIG_NET_TCPPROBE=m -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_VCAN=m -CONFIG_CAN_DEBUG_DEVICES=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_CONNECTOR=m -CONFIG_MTD=m -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=1 -CONFIG_MTD_CONCAT=m -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -CONFIG_FTL=m -CONFIG_NFTL=m -CONFIG_NFTL_RW=y -CONFIG_INFTL=m -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -CONFIG_MTD_OOPS=m -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_ROM=m -CONFIG_MTD_ABSENT=m -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -CONFIG_MTD_PLATRAM=m -CONFIG_MTD_DATAFLASH=m -CONFIG_MTD_M25P80=m -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -CONFIG_MTD_MTDRAM=m -CONFIG_MTD_BLOCK2MTD=m -CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND_DISKONCHIP=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_PLATFORM=m -CONFIG_MTD_ALAUDA=m -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_GLUEBI=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_ATMEL_TCLIB=y -CONFIG_ATMEL_SSC=m -CONFIG_SENSORS_TSL2550=m -CONFIG_DS1682=m -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_SCSI_TGT=m -# CONFIG_SCSI_PROC_FS is not set -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_MACVLAN=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m -CONFIG_VETH=m -CONFIG_PHYLIB=y -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_BROADCOM_PHY=m -CONFIG_ICPLUS_PHY=m -CONFIG_MDIO_BITBANG=m -CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_USB_ZD1201=m -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -# CONFIG_USB_NET_ZAURUS is not set -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_EVBUG=m -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_GPIO=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_VSXXXAA=m -CONFIG_MOUSE_GPIO=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=m -CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_RAW=m -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_N_HDLC=m -CONFIG_SPECIALIX=m -CONFIG_STALDRV=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_IPMI_HANDLER=m -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -CONFIG_IPMI_WATCHDOG=m -CONFIG_IPMI_POWEROFF=m -CONFIG_HW_RANDOM=y -CONFIG_R3964=m -CONFIG_RAW_DRIVER=m -CONFIG_TCG_TPM=m -CONFIG_TCG_NSC=m -CONFIG_TCG_ATMEL=m -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -CONFIG_SPI_BITBANG=m -CONFIG_SPI_SPIDEV=m -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -# CONFIG_SND_PCM_OSS_PLUGINS is not set -CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_DYNAMIC_MINORS=y -# CONFIG_SND_VERBOSE_PROCFS is not set -CONFIG_SND_DUMMY=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_HID=m -CONFIG_HIDRAW=y -CONFIG_USB_HID=m -CONFIG_USB_HIDDEV=y -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_HID_A4TECH=m -CONFIG_HID_APPLE=m -CONFIG_HID_BELKIN=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GYRATION=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_PANTHERLORD=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_HID_SUNPLUS=m -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_LIBUSUAL=y -CONFIG_USB_SERIAL=m -CONFIG_USB_EZUSB=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_DEBUG=m -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_TEST=m -CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_GADGET_DEBUG_FS=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_MIDI_GADGET=m -CONFIG_MMC=y -CONFIG_SDIO_UART=m -CONFIG_MMC_AT91=m -CONFIG_MMC_SPI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=m -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -CONFIG_RTC_DRV_DS1307=m -CONFIG_RTC_DRV_DS1305=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD_DEBUG=y -CONFIG_REISERFS_FS=m -CONFIG_REISERFS_CHECK=y -CONFIG_REISERFS_PROC_INFO=y -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=m -CONFIG_NTFS_RW=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_CMODE_FAVOURLZO=y -CONFIG_CRAMFS=m -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFSD=m -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_CIFS=m -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_LDM_DEBUG=y -CONFIG_SGI_PARTITION=y -CONFIG_SUN_PARTITION=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_FS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_CRYPTO=y -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261_defconfig index b46025b..ade6b2f 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261_defconfig @@ -1,9 +1,13 @@ CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_KERNEL_LZMA=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y +CONFIG_NAMESPACES=y +CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -15,18 +19,27 @@ CONFIG_ARCH_AT91SAM9261=y CONFIG_MACH_AT91SAM9261EK=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y +CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set +CONFIG_CFG80211=y +CONFIG_LIB80211=y +CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y @@ -34,8 +47,12 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y @@ -45,12 +62,27 @@ CONFIG_NET_ETHERNET=y CONFIG_DM9000=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +CONFIG_USB_ZD1201=m +CONFIG_RTL8187=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_ZD1211RW=m +CONFIG_INPUT_POLLDEV=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -65,31 +97,62 @@ CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_AT73C213=y +CONFIG_SND_USB_AUDIO=m # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_AT91=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y +CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_CRAMFS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_UTF8=y +CONFIG_FTRACE=y +CONFIG_CRC_CCITT=m diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263_defconfig index 8a04d6f..1cf9626 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -1,9 +1,13 @@ CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_KERNEL_LZMA=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y +CONFIG_NAMESPACES=y +CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -13,53 +17,81 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9263=y CONFIG_MACH_AT91SAM9263EK=y +CONFIG_MACH_USB_A9263=y +CONFIG_MACH_NEOCORE926=y CONFIG_MTD_AT91_DATAFLASH_CARD=y # CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y +CONFIG_AUTO_ZRELADDR=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y +CONFIG_NET_KEY=y CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y +CONFIG_NFTL=y +CONFIG_NFTL_RW=y CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_BLOCK2MTD=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_PWM=y +CONFIG_ATMEL_TCLIB=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_SMSC_PHY=y +CONFIG_NET_ETHERNET=y CONFIG_MACB=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_USB_ZD1201=m +CONFIG_INPUT_POLLDEV=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=4 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -74,8 +106,25 @@ CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_ATMEL_AC97C=y +# CONFIG_SND_SPI is not set +CONFIG_SND_USB_AUDIO=m CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y @@ -83,24 +132,37 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y +CONFIG_SDIO_UART=m CONFIG_MMC_AT91=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_ATMEL_PWM=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y +CONFIG_FUSE_FS=m CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y +CONFIG_FTRACE=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y +CONFIG_XZ_DEC=y diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig index 2ffba24..da53ff3 100644 --- a/arch/arm/configs/exynos4_defconfig +++ b/arch/arm/configs/exynos4_defconfig @@ -8,7 +8,9 @@ CONFIG_ARCH_EXYNOS4=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_MACH_SMDKC210=y CONFIG_MACH_SMDKV310=y +CONFIG_MACH_ARMLEX4210=y CONFIG_MACH_UNIVERSAL_C210=y +CONFIG_MACH_NURI=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig deleted file mode 100644 index 462dd18..0000000 --- a/arch/arm/configs/neocore926_defconfig +++ /dev/null @@ -1,104 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_COMPAT_BRK is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9263=y -CONFIG_MACH_NEOCORE926=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -# CONFIG_INET_LRO is not set -CONFIG_IPV6=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_NFTL=y -CONFIG_NFTL_RW=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC_SMC=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_ATMEL_PWM=y -CONFIG_ATMEL_TCLIB=y -CONFIG_SCSI=y -CONFIG_CHR_DEV_SG=y -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_SERIAL_ATMEL_PDC is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_ATMEL_LCDC=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_LOGO=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_MMC=y -CONFIG_SDIO_UART=y -CONFIG_MMC_AT91=m -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_AUTOFS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_WBUF_VERIFY=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig deleted file mode 100644 index 0e92a78..0000000 --- a/arch/arm/configs/s5p6442_defconfig +++ /dev/null @@ -1,65 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5P6442=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 -CONFIG_MACH_SMDK6442=y -CONFIG_CPU_32v6K=y -CONFIG_AEABI=y -CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" -CONFIG_FPE_NWFPE=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_NR_UARTS=3 -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_HW_RANDOM=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_ARM_UNWIND is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_S3C_UART=1 -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig deleted file mode 100644 index ee82d09..0000000 --- a/arch/arm/configs/usb-a9263_defconfig +++ /dev/null @@ -1,106 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9263=y -CONFIG_MACH_USB_A9263=y -CONFIG_AT91_SLOW_CLOCK=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y -CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/include/asm/fiq.h b/arch/arm/include/asm/fiq.h index 2242ce2..d493d0b 100644 --- a/arch/arm/include/asm/fiq.h +++ b/arch/arm/include/asm/fiq.h @@ -4,6 +4,13 @@ * Support for FIQ on ARM architectures. * Written by Philip Blundell <philb@gnu.org>, 1998 * Re-written by Russell King + * + * NOTE: The FIQ mode registers are not magically preserved across + * suspend/resume. + * + * Drivers which require these registers to be preserved across power + * management operations must implement appropriate suspend/resume handlers to + * save and restore them. */ #ifndef __ASM_FIQ_H @@ -29,9 +36,21 @@ struct fiq_handler { extern int claim_fiq(struct fiq_handler *f); extern void release_fiq(struct fiq_handler *f); extern void set_fiq_handler(void *start, unsigned int length); -extern void set_fiq_regs(struct pt_regs *regs); -extern void get_fiq_regs(struct pt_regs *regs); extern void enable_fiq(int fiq); extern void disable_fiq(int fiq); +/* helpers defined in fiqasm.S: */ +extern void __set_fiq_regs(unsigned long const *regs); +extern void __get_fiq_regs(unsigned long *regs); + +static inline void set_fiq_regs(struct pt_regs const *regs) +{ + __set_fiq_regs(®s->ARM_r8); +} + +static inline void get_fiq_regs(struct pt_regs *regs) +{ + __get_fiq_regs(®s->ARM_r8); +} + #endif diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index bf13b81..946f4d7 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -18,6 +18,8 @@ struct machine_desc { unsigned int nr; /* architecture number */ const char *name; /* architecture name */ unsigned long boot_params; /* tagged list */ + const char **dt_compat; /* array of device tree + * 'compatible' strings */ unsigned int nr_irqs; /* number of IRQs */ @@ -48,6 +50,13 @@ struct machine_desc { extern struct machine_desc *machine_desc; /* + * Machine type table - also only accessible during boot + */ +extern struct machine_desc __arch_info_begin[], __arch_info_end[]; +#define for_each_machine_desc(p) \ + for (p = __arch_info_begin; p < __arch_info_end; p++) + +/* * Set of macros to define architecture features. This is built into * a table by the linker. */ diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index f51a695..ac75d08 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -197,7 +197,7 @@ typedef unsigned long pgprot_t; typedef struct page *pgtable_t; -#ifndef CONFIG_SPARSEMEM +#ifdef CONFIG_HAVE_ARCH_PFN_VALID extern int pfn_valid(unsigned long); #endif diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h new file mode 100644 index 0000000..11b8708 --- /dev/null +++ b/arch/arm/include/asm/prom.h @@ -0,0 +1,37 @@ +/* + * arch/arm/include/asm/prom.h + * + * Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef __ASMARM_PROM_H +#define __ASMARM_PROM_H + +#ifdef CONFIG_OF + +#include <asm/setup.h> +#include <asm/irq.h> + +static inline void irq_dispose_mapping(unsigned int virq) +{ + return; +} + +extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys); +extern void arm_dt_memblock_reserve(void); + +#else /* CONFIG_OF */ + +static inline struct machine_desc *setup_machine_fdt(unsigned int dt_phys) +{ + return NULL; +} + +static inline void arm_dt_memblock_reserve(void) { } + +#endif /* CONFIG_OF */ +#endif /* ASMARM_PROM_H */ diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 95176af..ee2ad8a 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -217,6 +217,10 @@ extern struct meminfo meminfo; #define bank_phys_end(bank) ((bank)->start + (bank)->size) #define bank_phys_size(bank) (bank)->size +extern int arm_add_memory(phys_addr_t start, unsigned long size); +extern void early_print(const char *str, ...); +extern void dump_machine_table(void); + #endif /* __KERNEL__ */ #endif diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index d2b514f..e42d96a 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -70,6 +70,7 @@ extern void platform_smp_prepare_cpus(unsigned int); */ struct secondary_data { unsigned long pgdir; + unsigned long swapper_pg_dir; void *stack; }; extern struct secondary_data secondary_data; diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 87dbe3e..3de689a 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -400,6 +400,7 @@ #define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) #define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) #define __NR_syncfs (__NR_SYSCALL_BASE+373) +#define __NR_sendmmsg (__NR_SYSCALL_BASE+374) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 8d95446..a5b31af 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -24,7 +24,7 @@ obj-$(CONFIG_OC_ETM) += etm.o obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_ARCH_ACORN) += ecard.o -obj-$(CONFIG_FIQ) += fiq.o +obj-$(CONFIG_FIQ) += fiq.o fiqasm.o obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o @@ -44,6 +44,7 @@ obj-$(CONFIG_ARM_THUMBEE) += thumbee.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_ARM_UNWIND) += unwind.o obj-$(CONFIG_HAVE_TCM) += tcm.o +obj-$(CONFIG_OF) += devtree.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_SWP_EMULATE) += swp_emulate.o CFLAGS_swp_emulate.o := -Wa,-march=armv7-a diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 7fbf28c..24cdac3 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -383,6 +383,7 @@ CALL(sys_open_by_handle_at) CALL(sys_clock_adjtime) CALL(sys_syncfs) + CALL(sys_sendmmsg) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c new file mode 100644 index 0000000..a701e42 --- /dev/null +++ b/arch/arm/kernel/devtree.c @@ -0,0 +1,145 @@ +/* + * linux/arch/arm/kernel/devtree.c + * + * Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/bootmem.h> +#include <linux/memblock.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> + +#include <asm/setup.h> +#include <asm/page.h> +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +void __init early_init_dt_add_memory_arch(u64 base, u64 size) +{ + arm_add_memory(base, size); +} + +void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) +{ + return alloc_bootmem_align(size, align); +} + +void __init arm_dt_memblock_reserve(void) +{ + u64 *reserve_map, base, size; + + if (!initial_boot_params) + return; + + /* Reserve the dtb region */ + memblock_reserve(virt_to_phys(initial_boot_params), + be32_to_cpu(initial_boot_params->totalsize)); + + /* + * Process the reserve map. This will probably overlap the initrd + * and dtb locations which are already reserved, but overlaping + * doesn't hurt anything + */ + reserve_map = ((void*)initial_boot_params) + + be32_to_cpu(initial_boot_params->off_mem_rsvmap); + while (1) { + base = be64_to_cpup(reserve_map++); + size = be64_to_cpup(reserve_map++); + if (!size) + break; + memblock_reserve(base, size); + } +} + +/** + * setup_machine_fdt - Machine setup when an dtb was passed to the kernel + * @dt_phys: physical address of dt blob + * + * If a dtb was passed to the kernel in r2, then use it to choose the + * correct machine_desc and to setup the system. + */ +struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) +{ + struct boot_param_header *devtree; + struct machine_desc *mdesc, *mdesc_best = NULL; + unsigned int score, mdesc_score = ~1; + unsigned long dt_root; + const char *model; + + devtree = phys_to_virt(dt_phys); + + /* check device tree validity */ + if (be32_to_cpu(devtree->magic) != OF_DT_HEADER) + return NULL; + + /* Search the mdescs for the 'best' compatible value match */ + initial_boot_params = devtree; + dt_root = of_get_flat_dt_root(); + for_each_machine_desc(mdesc) { + score = of_flat_dt_match(dt_root, mdesc->dt_compat); + if (score > 0 && score < mdesc_score) { + mdesc_best = mdesc; + mdesc_score = score; + } + } + if (!mdesc_best) { + const char *prop; + long size; + + early_print("\nError: unrecognized/unsupported " + "device tree compatible list:\n[ "); + + prop = of_get_flat_dt_prop(dt_root, "compatible", &size); + while (size > 0) { + early_print("'%s' ", prop); + size -= strlen(prop) + 1; + prop += strlen(prop) + 1; + } + early_print("]\n\n"); + + dump_machine_table(); /* does not return */ + } + + model = of_get_flat_dt_prop(dt_root, "model", NULL); + if (!model) + model = of_get_flat_dt_prop(dt_root, "compatible", NULL); + if (!model) + model = "<unknown>"; + pr_info("Machine: %s, model: %s\n", mdesc_best->name, model); + + /* Retrieve various information from the /chosen node */ + of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line); + /* Initialize {size,address}-cells info */ + of_scan_flat_dt(early_init_dt_scan_root, NULL); + /* Setup memory, calling early_init_dt_add_memory_arch */ + of_scan_flat_dt(early_init_dt_scan_memory, NULL); + + /* Change machine number to match the mdesc we're using */ + __machine_arch_type = mdesc_best->nr; + + return mdesc_best; +} + +/** + * irq_create_of_mapping - Hook to resolve OF irq specifier into a Linux irq# + * + * Currently the mapping mechanism is trivial; simple flat hwirq numbers are + * mapped 1:1 onto Linux irq numbers. Cascaded irq controllers are not + * supported. + */ +unsigned int irq_create_of_mapping(struct device_node *controller, + const u32 *intspec, unsigned int intsize) +{ + return intspec[0]; +} +EXPORT_SYMBOL_GPL(irq_create_of_mapping); diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index e72dc34..4c164ec 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -89,47 +89,6 @@ void set_fiq_handler(void *start, unsigned int length) flush_icache_range(0x1c, 0x1c + length); } -/* - * Taking an interrupt in FIQ mode is death, so both these functions - * disable irqs for the duration. Note - these functions are almost - * entirely coded in assembly. - */ -void __naked set_fiq_regs(struct pt_regs *regs) -{ - register unsigned long tmp; - asm volatile ( - "mov ip, sp\n\ - stmfd sp!, {fp, ip, lr, pc}\n\ - sub fp, ip, #4\n\ - mrs %0, cpsr\n\ - msr cpsr_c, %2 @ select FIQ mode\n\ - mov r0, r0\n\ - ldmia %1, {r8 - r14}\n\ - msr cpsr_c, %0 @ return to SVC mode\n\ - mov r0, r0\n\ - ldmfd sp, {fp, sp, pc}" - : "=&r" (tmp) - : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE)); -} - -void __naked get_fiq_regs(struct pt_regs *regs) -{ - register unsigned long tmp; - asm volatile ( - "mov ip, sp\n\ - stmfd sp!, {fp, ip, lr, pc}\n\ - sub fp, ip, #4\n\ - mrs %0, cpsr\n\ - msr cpsr_c, %2 @ select FIQ mode\n\ - mov r0, r0\n\ - stmia %1, {r8 - r14}\n\ - msr cpsr_c, %0 @ return to SVC mode\n\ - mov r0, r0\n\ - ldmfd sp, {fp, sp, pc}" - : "=&r" (tmp) - : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE)); -} - int claim_fiq(struct fiq_handler *f) { int ret = 0; @@ -174,8 +133,8 @@ void disable_fiq(int fiq) } EXPORT_SYMBOL(set_fiq_handler); -EXPORT_SYMBOL(set_fiq_regs); -EXPORT_SYMBOL(get_fiq_regs); +EXPORT_SYMBOL(__set_fiq_regs); /* defined in fiqasm.S */ +EXPORT_SYMBOL(__get_fiq_regs); /* defined in fiqasm.S */ EXPORT_SYMBOL(claim_fiq); EXPORT_SYMBOL(release_fiq); EXPORT_SYMBOL(enable_fiq); diff --git a/arch/arm/kernel/fiqasm.S b/arch/arm/kernel/fiqasm.S new file mode 100644 index 0000000..207f9d6 --- /dev/null +++ b/arch/arm/kernel/fiqasm.S @@ -0,0 +1,49 @@ +/* + * linux/arch/arm/kernel/fiqasm.S + * + * Derived from code originally in linux/arch/arm/kernel/fiq.c: + * + * Copyright (C) 1998 Russell King + * Copyright (C) 1998, 1999 Phil Blundell + * Copyright (C) 2011, Linaro Limited + * + * FIQ support written by Philip Blundell <philb@gnu.org>, 1998. + * + * FIQ support re-written by Russell King to be more generic + * + * v7/Thumb-2 compatibility modifications by Linaro Limited, 2011. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +/* + * Taking an interrupt in FIQ mode is death, so both these functions + * disable irqs for the duration. + */ + +ENTRY(__set_fiq_regs) + mov r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE + mrs r1, cpsr + msr cpsr_c, r2 @ select FIQ mode + mov r0, r0 @ avoid hazard prior to ARMv4 + ldmia r0!, {r8 - r12} + ldr sp, [r0], #4 + ldr lr, [r0] + msr cpsr_c, r1 @ return to SVC mode + mov r0, r0 @ avoid hazard prior to ARMv4 + mov pc, lr +ENDPROC(__set_fiq_regs) + +ENTRY(__get_fiq_regs) + mov r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE + mrs r1, cpsr + msr cpsr_c, r2 @ select FIQ mode + mov r0, r0 @ avoid hazard prior to ARMv4 + stmia r0!, {r8 - r12} + str sp, [r0], #4 + str lr, [r0] + msr cpsr_c, r1 @ return to SVC mode + mov r0, r0 @ avoid hazard prior to ARMv4 + mov pc, lr +ENDPROC(__get_fiq_regs) diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index c84b57d..854bd22 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -15,6 +15,12 @@ #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) #define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2) +#ifdef CONFIG_CPU_BIG_ENDIAN +#define OF_DT_MAGIC 0xd00dfeed +#else +#define OF_DT_MAGIC 0xedfe0dd0 /* 0xd00dfeed in big-endian */ +#endif + /* * Exception handling. Something went wrong and we can't proceed. We * ought to tell the user, but since we don't have any guarantee that @@ -28,20 +34,26 @@ /* Determine validity of the r2 atags pointer. The heuristic requires * that the pointer be aligned, in the first 16k of physical RAM and - * that the ATAG_CORE marker is first and present. Future revisions + * that the ATAG_CORE marker is first and present. If CONFIG_OF_FLATTREE + * is selected, then it will also accept a dtb pointer. Future revisions * of this function may be more lenient with the physical address and * may also be able to move the ATAGS block if necessary. * * Returns: - * r2 either valid atags pointer, or zero + * r2 either valid atags pointer, valid dtb pointer, or zero * r5, r6 corrupted */ __vet_atags: tst r2, #0x3 @ aligned? bne 1f - ldr r5, [r2, #0] @ is first tag ATAG_CORE? - cmp r5, #ATAG_CORE_SIZE + ldr r5, [r2, #0] +#ifdef CONFIG_OF_FLATTREE + ldr r6, =OF_DT_MAGIC @ is it a DTB? + cmp r5, r6 + beq 2f +#endif + cmp r5, #ATAG_CORE_SIZE @ is first tag ATAG_CORE? cmpne r5, #ATAG_CORE_SIZE_EMPTY bne 1f ldr r5, [r2, #4] @@ -49,7 +61,7 @@ __vet_atags: cmp r5, r6 bne 1f - mov pc, lr @ atag pointer is ok +2: mov pc, lr @ atag/dtb pointer is ok 1: mov r2, #0 mov pc, lr @@ -61,7 +73,7 @@ ENDPROC(__vet_atags) * * r0 = cp#15 control register * r1 = machine ID - * r2 = atags pointer + * r2 = atags/dtb pointer * r9 = processor ID */ __INIT diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index c9173cf..278c1b0 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -59,7 +59,7 @@ * * This is normally called from the decompressor code. The requirements * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0, - * r1 = machine nr, r2 = atags pointer. + * r1 = machine nr, r2 = atags or dtb pointer. * * This code is mostly position independent, so if you link the kernel at * 0xc0008000, you call this at __pa(0xc0008000). @@ -91,7 +91,7 @@ ENTRY(stext) #endif /* - * r1 = machine no, r2 = atags, + * r1 = machine no, r2 = atags or dtb, * r8 = phys_offset, r9 = cpuid, r10 = procinfo */ bl __vet_atags @@ -113,6 +113,7 @@ ENTRY(stext) ldr r13, =__mmap_switched @ address to jump to after @ mmu has been enabled adr lr, BSYM(1f) @ return (PIC) address + mov r8, r4 @ set TTBR1 to swapper_pg_dir ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) THUMB( mov pc, r12 ) @@ -302,8 +303,10 @@ ENTRY(secondary_startup) */ adr r4, __secondary_data ldmia r4, {r5, r7, r12} @ address to jump to after - sub r4, r4, r5 @ mmu has been enabled - ldr r4, [r7, r4] @ get secondary_data.pgdir + sub lr, r4, r5 @ mmu has been enabled + ldr r4, [r7, lr] @ get secondary_data.pgdir + add r7, r7, #4 + ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir adr lr, BSYM(__enable_mmu) @ return address mov r13, r12 @ __secondary_switched address ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor @@ -339,7 +342,7 @@ __secondary_data: * * r0 = cp#15 control register * r1 = machine ID - * r2 = atags pointer + * r2 = atags or dtb pointer * r4 = page table pointer * r9 = processor ID * r13 = *virtual* address to jump to upon completion @@ -376,7 +379,7 @@ ENDPROC(__enable_mmu) * * r0 = cp#15 control register * r1 = machine ID - * r2 = atags pointer + * r2 = atags or dtb pointer * r9 = processor ID * r13 = *virtual* address to jump to upon completion * diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 6dce209..ed11fb0 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -20,6 +20,7 @@ #include <linux/screen_info.h> #include <linux/init.h> #include <linux/kexec.h> +#include <linux/of_fdt.h> #include <linux/crash_dump.h> #include <linux/root_dev.h> #include <linux/cpu.h> @@ -42,6 +43,7 @@ #include <asm/cachetype.h> #include <asm/tlbflush.h> +#include <asm/prom.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> @@ -309,7 +311,7 @@ static void __init cacheid_init(void) */ extern struct proc_info_list *lookup_processor_type(unsigned int); -static void __init early_print(const char *str, ...) +void __init early_print(const char *str, ...) { extern void printascii(const char *); char buf[256]; @@ -439,25 +441,12 @@ void cpu_init(void) : "r14"); } -static struct machine_desc * __init setup_machine(unsigned int nr) +void __init dump_machine_table(void) { - extern struct machine_desc __arch_info_begin[], __arch_info_end[]; struct machine_desc *p; - /* - * locate machine in the list of supported machines. - */ - for (p = __arch_info_begin; p < __arch_info_end; p++) - if (nr == p->nr) { - printk("Machine: %s\n", p->name); - return p; - } - - early_print("\n" - "Error: unrecognized/unsupported machine ID (r1 = 0x%08x).\n\n" - "Available machine support:\n\nID (hex)\tNAME\n", nr); - - for (p = __arch_info_begin; p < __arch_info_end; p++) + early_print("Available machine support:\n\nID (hex)\tNAME\n"); + for_each_machine_desc(p) early_print("%08x\t%s\n", p->nr, p->name); early_print("\nPlease check your kernel config and/or bootloader.\n"); @@ -466,7 +455,7 @@ static struct machine_desc * __init setup_machine(unsigned int nr) /* can't use cpu_relax() here as it may require MMU setup */; } -static int __init arm_add_memory(phys_addr_t start, unsigned long size) +int __init arm_add_memory(phys_addr_t start, unsigned long size) { struct membank *bank = &meminfo.bank[meminfo.nr_banks]; @@ -801,23 +790,29 @@ static void __init squash_mem_tags(struct tag *tag) tag->hdr.tag = ATAG_NONE; } -void __init setup_arch(char **cmdline_p) +static struct machine_desc * __init setup_machine_tags(unsigned int nr) { struct tag *tags = (struct tag *)&init_tags; - struct machine_desc *mdesc; + struct machine_desc *mdesc = NULL, *p; char *from = default_command_line; init_tags.mem.start = PHYS_OFFSET; - unwind_init(); - - setup_processor(); - mdesc = setup_machine(machine_arch_type); - machine_desc = mdesc; - machine_name = mdesc->name; + /* + * locate machine in the list of supported machines. + */ + for_each_machine_desc(p) + if (nr == p->nr) { + printk("Machine: %s\n", p->name); + mdesc = p; + break; + } - if (mdesc->soft_reboot) - reboot_setup("s"); + if (!mdesc) { + early_print("\nError: unrecognized/unsupported machine ID" + " (r1 = 0x%08x).\n\n", nr); + dump_machine_table(); /* does not return */ + } if (__atags_pointer) tags = phys_to_virt(__atags_pointer); @@ -849,8 +844,17 @@ void __init setup_arch(char **cmdline_p) if (tags->hdr.tag != ATAG_CORE) convert_to_tag_list(tags); #endif - if (tags->hdr.tag != ATAG_CORE) + + if (tags->hdr.tag != ATAG_CORE) { +#if defined(CONFIG_OF) + /* + * If CONFIG_OF is set, then assume this is a reasonably + * modern system that should pass boot parameters + */ + early_print("Warning: Neither atags nor dtb found\n"); +#endif tags = (struct tag *)&init_tags; + } if (mdesc->fixup) mdesc->fixup(mdesc, tags, &from, &meminfo); @@ -862,14 +866,34 @@ void __init setup_arch(char **cmdline_p) parse_tags(tags); } + /* parse_early_param needs a boot_command_line */ + strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); + + return mdesc; +} + + +void __init setup_arch(char **cmdline_p) +{ + struct machine_desc *mdesc; + + unwind_init(); + + setup_processor(); + mdesc = setup_machine_fdt(__atags_pointer); + if (!mdesc) + mdesc = setup_machine_tags(machine_arch_type); + machine_desc = mdesc; + machine_name = mdesc->name; + + if (mdesc->soft_reboot) + reboot_setup("s"); + init_mm.start_code = (unsigned long) _text; init_mm.end_code = (unsigned long) _etext; init_mm.end_data = (unsigned long) _edata; init_mm.brk = (unsigned long) _end; - /* parse_early_param needs a boot_command_line */ - strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); - /* populate cmd_line too for later use, preserving boot_command_line */ strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = cmd_line; @@ -881,6 +905,8 @@ void __init setup_arch(char **cmdline_p) paging_init(mdesc); request_standard_resources(mdesc); + unflatten_device_tree(); + #ifdef CONFIG_SMP if (is_smp()) smp_init_cpus(); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index d439a8f..344e52b 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -105,6 +105,7 @@ int __cpuinit __cpu_up(unsigned int cpu) */ secondary_data.stack = task_stack_page(idle) + THREAD_START_SP; secondary_data.pgdir = virt_to_phys(pgd); + secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir); __cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data)); outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1)); diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S index 6dc0648..c562f64 100644 --- a/arch/arm/lib/lib1funcs.S +++ b/arch/arm/lib/lib1funcs.S @@ -35,7 +35,7 @@ Boston, MA 02111-1307, USA. */ #include <linux/linkage.h> #include <asm/assembler.h> - +#include <asm/unwind.h> .macro ARM_DIV_BODY dividend, divisor, result, curbit @@ -207,6 +207,7 @@ Boston, MA 02111-1307, USA. */ ENTRY(__udivsi3) ENTRY(__aeabi_uidiv) +UNWIND(.fnstart) subs r2, r1, #1 moveq pc, lr @@ -230,10 +231,12 @@ ENTRY(__aeabi_uidiv) mov r0, r0, lsr r2 mov pc, lr +UNWIND(.fnend) ENDPROC(__udivsi3) ENDPROC(__aeabi_uidiv) ENTRY(__umodsi3) +UNWIND(.fnstart) subs r2, r1, #1 @ compare divisor with 1 bcc Ldiv0 @@ -247,10 +250,12 @@ ENTRY(__umodsi3) mov pc, lr +UNWIND(.fnend) ENDPROC(__umodsi3) ENTRY(__divsi3) ENTRY(__aeabi_idiv) +UNWIND(.fnstart) cmp r1, #0 eor ip, r0, r1 @ save the sign of the result. @@ -287,10 +292,12 @@ ENTRY(__aeabi_idiv) rsbmi r0, r0, #0 mov pc, lr +UNWIND(.fnend) ENDPROC(__divsi3) ENDPROC(__aeabi_idiv) ENTRY(__modsi3) +UNWIND(.fnstart) cmp r1, #0 beq Ldiv0 @@ -310,11 +317,14 @@ ENTRY(__modsi3) rsbmi r0, r0, #0 mov pc, lr +UNWIND(.fnend) ENDPROC(__modsi3) #ifdef CONFIG_AEABI ENTRY(__aeabi_uidivmod) +UNWIND(.fnstart) +UNWIND(.save {r0, r1, ip, lr} ) stmfd sp!, {r0, r1, ip, lr} bl __aeabi_uidiv @@ -323,10 +333,12 @@ ENTRY(__aeabi_uidivmod) sub r1, r1, r3 mov pc, lr +UNWIND(.fnend) ENDPROC(__aeabi_uidivmod) ENTRY(__aeabi_idivmod) - +UNWIND(.fnstart) +UNWIND(.save {r0, r1, ip, lr} ) stmfd sp!, {r0, r1, ip, lr} bl __aeabi_idiv ldmfd sp!, {r1, r2, ip, lr} @@ -334,15 +346,18 @@ ENTRY(__aeabi_idivmod) sub r1, r1, r3 mov pc, lr +UNWIND(.fnend) ENDPROC(__aeabi_idivmod) #endif Ldiv0: - +UNWIND(.fnstart) +UNWIND(.pad #4) +UNWIND(.save {lr}) str lr, [sp, #-8]! bl __div0 mov r0, #0 @ About as wrong as it could be. ldr pc, [sp], #8 - - +UNWIND(.fnend) +ENDPROC(Ldiv0) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 2d299bf..2248467 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -3,9 +3,6 @@ if ARCH_AT91 config HAVE_AT91_DATAFLASH_CARD bool -config HAVE_NAND_ATMEL_BUSWIDTH_16 - bool - config HAVE_AT91_USART3 bool @@ -85,11 +82,6 @@ config ARCH_AT91CAP9 select HAVE_FB_ATMEL select HAVE_NET_MACB -config ARCH_AT572D940HF - bool "AT572D940HF" - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - config ARCH_AT91X40 bool "AT91x40" select ARCH_USES_GETTIMEOFFSET @@ -209,7 +201,6 @@ comment "AT91SAM9260 / AT91SAM9XE Board Type" config MACH_AT91SAM9260EK bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> @@ -270,7 +261,6 @@ comment "AT91SAM9261 Board Type" config MACH_AT91SAM9261EK bool "Atmel AT91SAM9261-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> @@ -286,7 +276,6 @@ comment "AT91SAM9G10 Board Type" config MACH_AT91SAM9G10EK bool "Atmel AT91SAM9G10-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> @@ -302,7 +291,6 @@ comment "AT91SAM9263 Board Type" config MACH_AT91SAM9263EK bool "Atmel AT91SAM9263-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> @@ -343,7 +331,6 @@ comment "AT91SAM9G20 Board Type" config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit that embeds only one SD/MMC slot. @@ -351,7 +338,6 @@ config MACH_AT91SAM9G20EK config MACH_AT91SAM9G20EK_2MMC depends on MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and @@ -416,7 +402,6 @@ comment "AT91SAM9G45 Board Type" config MACH_AT91SAM9M10G45EK bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit. "ES" at the end of the name means that this board is an @@ -433,7 +418,6 @@ comment "AT91CAP9 Board Type" config MACH_AT91CAP9ADK bool "Atmel AT91CAP9A-DK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> @@ -442,23 +426,6 @@ endif # ---------------------------------------------------------- -if ARCH_AT572D940HF - -comment "AT572D940HF Board Type" - -config MACH_AT572D940HFEB - bool "AT572D940HF-EK" - depends on ARCH_AT572D940HF - select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 - help - Select this if you are using Atmel's AT572D940HF-EK evaluation kit. - <http://www.atmel.com/products/diopsis/default.asp> - -endif - -# ---------------------------------------------------------- - if ARCH_AT91X40 comment "AT91X40 Board Type" @@ -483,13 +450,6 @@ config MTD_AT91_DATAFLASH_CARD help Enable support for the DataFlash card. -config MTD_NAND_ATMEL_BUSWIDTH_16 - bool "Enable 16-bit data bus interface to NAND flash" - depends on HAVE_NAND_ATMEL_BUSWIDTH_16 - help - On AT91SAM926x boards both types of NAND flash can be present - (8 and 16 bit data bus width). - # ---------------------------------------------------------- comment "AT91 Feature Selections" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index a83835e..9696623 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devi obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support @@ -78,9 +77,6 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91CAP9 board-specific support obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o -# AT572D940HF board-specific support -obj-$(CONFIG_MACH_AT572D940HFEB) += board-at572d940hf_ek.o - # AT91X40 board-specific support obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c deleted file mode 100644 index a6b9c68..0000000 --- a/arch/arm/mach-at91/at572d940hf.c +++ /dev/null @@ -1,377 +0,0 @@ -/* - * arch/arm/mach-at91/at572d940hf.c - * - * Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2008 Atmel - * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <linux/module.h> - -#include <asm/mach/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/at572d940hf.h> -#include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> - -#include "generic.h" -#include "clock.h" - -static struct map_desc at572d940hf_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT572D940HF_SRAM_SIZE, - .pfn = __phys_to_pfn(AT572D940HF_SRAM_BASE), - .length = AT572D940HF_SRAM_SIZE, - .type = MT_DEVICE, - }, -}; - -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioA_clk = { - .name = "pioA_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioC_clk = { - .name = "pioC_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk macb_clk = { - .name = "macb_clk", - .pmc_mask = 1 << AT572D940HF_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT572D940HF_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT572D940HF_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT572D940HF_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc_clk = { - .name = "mci_clk", - .pmc_mask = 1 << AT572D940HF_ID_MCI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udc_clk = { - .name = "udc_clk", - .pmc_mask = 1 << AT572D940HF_ID_UDP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi0_clk = { - .name = "twi0_clk", - .pmc_mask = 1 << AT572D940HF_ID_TWI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT572D940HF_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT572D940HF_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc2_clk = { - .name = "ssc2_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc0_clk = { - .name = "tc0_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc1_clk = { - .name = "tc1_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc2_clk = { - .name = "tc2_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT572D940HF_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc3_clk = { - .name = "ssc3_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi1_clk = { - .name = "twi1_clk", - .pmc_mask = 1 << AT572D940HF_ID_TWI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can0_clk = { - .name = "can0_clk", - .pmc_mask = 1 << AT572D940HF_ID_CAN0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can1_clk = { - .name = "can1_clk", - .pmc_mask = 1 << AT572D940HF_ID_CAN1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mAgicV_clk = { - .name = "mAgicV_clk", - .pmc_mask = 1 << AT572D940HF_ID_MSIRQ0, - .type = CLK_TYPE_PERIPHERAL, -}; - - -static struct clk *periph_clocks[] __initdata = { - &pioA_clk, - &pioB_clk, - &pioC_clk, - &macb_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &mmc_clk, - &udc_clk, - &twi0_clk, - &spi0_clk, - &spi1_clk, - &ssc0_clk, - &ssc1_clk, - &ssc2_clk, - &tc0_clk, - &tc1_clk, - &tc2_clk, - &ohci_clk, - &ssc3_clk, - &twi1_clk, - &can0_clk, - &can1_clk, - &mAgicV_clk, - /* irq0 .. irq2 */ -}; - -/* - * The five programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 3, -}; - -static struct clk mAgicV_mem_clk = { - .name = "mAgicV_mem_clk", - .pmc_mask = AT91_PMC_PCK4, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 4, -}; - -/* HClocks */ -static struct clk hck0 = { - .name = "hck0", - .pmc_mask = AT91_PMC_HCK0, - .type = CLK_TYPE_SYSTEM, - .id = 0, -}; -static struct clk hck1 = { - .name = "hck1", - .pmc_mask = AT91_PMC_HCK1, - .type = CLK_TYPE_SYSTEM, - .id = 1, -}; - -static void __init at572d940hf_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clk_register(&pck0); - clk_register(&pck1); - clk_register(&pck2); - clk_register(&pck3); - clk_register(&mAgicV_mem_clk); - - clk_register(&hck0); - clk_register(&hck1); -} - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at572d940hf_gpio[] = { - { - .id = AT572D940HF_ID_PIOA, - .offset = AT91_PIOA, - .clock = &pioA_clk, - }, { - .id = AT572D940HF_ID_PIOB, - .offset = AT91_PIOB, - .clock = &pioB_clk, - }, { - .id = AT572D940HF_ID_PIOC, - .offset = AT91_PIOC, - .clock = &pioC_clk, - } -}; - -static void at572d940hf_reset(void) -{ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); -} - - -/* -------------------------------------------------------------------- - * AT572D940HF processor initialization - * -------------------------------------------------------------------- */ - -void __init at572d940hf_initialize(unsigned long main_clock) -{ - /* Map peripherals */ - iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc)); - - at91_arch_reset = at572d940hf_reset; - at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1) - | (1 << AT572D940HF_ID_IRQ2); - - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at572d940hf_register_clocks(); - - /* Register GPIO subsystem */ - at91_gpio_init(at572d940hf_gpio, 3); -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ - 3, /* Ethernet */ - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ - 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface 0 */ - 6, /* Serial Peripheral Interface 0 */ - 6, /* Serial Peripheral Interface 1 */ - 5, /* Serial Synchronous Controller 0 */ - 5, /* Serial Synchronous Controller 1 */ - 5, /* Serial Synchronous Controller 2 */ - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ - 3, /* USB Host port */ - 3, /* Serial Synchronous Controller 3 */ - 0, /* Two-Wire Interface 1 */ - 0, /* CAN Controller 0 */ - 0, /* CAN Controller 1 */ - 0, /* mAgicV HALT line */ - 0, /* mAgicV SIRQ0 line */ - 0, /* mAgicV exception line */ - 0, /* mAgicV end of DMA line */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ -}; - -void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at572d940hf_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} - diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c deleted file mode 100644 index 0fc20a2..0000000 --- a/arch/arm/mach-at91/at572d940hf_devices.c +++ /dev/null @@ -1,970 +0,0 @@ -/* - * arch/arm/mach-at91/at572d940hf_devices.c - * - * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> - * Copyright (C) 2005 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> - -#include <mach/board.h> -#include <mach/gpio.h> -#include <mach/at572d940hf.h> -#include <mach/at572d940hf_matrix.h> -#include <mach/at91sam9_smc.h> - -#include "generic.h" -#include "sam9_smc.h" - - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT572D940HF_UHP_BASE, - .end = AT572D940HF_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_UHP, - .end = AT572D940HF_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - if (!data) - return; - - usbh_data = *data; - platform_device_register(&at572d940hf_usbh_device); - -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB Device (Gadget) - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_USB_GADGET_AT91 -static struct at91_udc_data udc_data; - -static struct resource udc_resources[] = { - [0] = { - .start = AT572D940HF_BASE_UDP, - .end = AT572D940HF_BASE_UDP + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_UDP, - .end = AT572D940HF_ID_UDP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_udc_device = { - .name = "at91_udc", - .id = -1, - .dev = { - .platform_data = &udc_data, - }, - .resource = udc_resources, - .num_resources = ARRAY_SIZE(udc_resources), -}; - -void __init at91_add_device_udc(struct at91_udc_data *data) -{ - if (!data) - return; - - if (data->vbus_pin) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - } - - /* Pullup pin is handled internally */ - - udc_data = *data; - platform_device_register(&at572d940hf_udc_device); -} -#else -void __init at91_add_device_udc(struct at91_udc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct at91_eth_data eth_data; - -static struct resource eth_resources[] = { - [0] = { - .start = AT572D940HF_BASE_EMAC, - .end = AT572D940HF_BASE_EMAC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_EMAC, - .end = AT572D940HF_ID_EMAC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_eth_device = { - .name = "macb", - .id = -1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, - .num_resources = ARRAY_SIZE(eth_resources), -}; - -void __init at91_add_device_eth(struct at91_eth_data *data) -{ - if (!data) - return; - - if (data->phy_irq_pin) { - at91_set_gpio_input(data->phy_irq_pin, 0); - at91_set_deglitch(data->phy_irq_pin, 1); - } - - /* Only RMII is supported */ - data->is_rmii = 1; - - /* Pins used for RMII */ - at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXCK_EREFCK */ - at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PA19, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PA23, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PA21, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PA22, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PA13, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* EMDC */ - - eth_data = *data; - platform_device_register(&at572d940hf_eth_device); -} -#else -void __init at91_add_device_eth(struct at91_eth_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; - -static struct resource mmc_resources[] = { - [0] = { - .start = AT572D940HF_BASE_MCI, - .end = AT572D940HF_BASE_MCI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_MCI, - .end = AT572D940HF_ID_MCI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_mmc_device = { - .name = "at91_mci", - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, - .num_resources = ARRAY_SIZE(mmc_resources), -}; - -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) -{ - if (!data) - return; - - /* input/irq */ - if (data->det_pin) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (data->wp_pin) - at91_set_gpio_input(data->wp_pin, 1); - if (data->vcc_pin) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_A_periph(AT91_PIN_PC22, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PC23, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PC24, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PC25, 1); - at91_set_A_periph(AT91_PIN_PC26, 1); - at91_set_A_periph(AT91_PIN_PC27, 1); - } - - mmc_data = *data; - platform_device_register(&at572d940hf_mmc_device); -} -#else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at572d940hf_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (data->enable_pin) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (data->rdy_pin) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (data->det_pin) - at91_set_gpio_input(data->det_pin, 1); - - at91_set_A_periph(AT91_PIN_PB28, 0); /* A[22] */ - at91_set_B_periph(AT91_PIN_PA28, 0); /* NANDOE */ - at91_set_B_periph(AT91_PIN_PA29, 0); /* NANDWE */ - - nand_data = *data; - platform_device_register(&at572d940hf_nand_device); -} - -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ - -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PC7, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PC8, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at572d940hf_twi_device { - .name = "i2c-gpio", - .id = -1, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PC7, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PC7, 1); - - at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PC8, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at572d940hf_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TWI0, - .end = AT572D940HF_BASE_TWI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TWI0, - .end = AT572D940HF_ID_TWI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_twi0_device = { - .name = "at91_i2c", - .id = 0, - .resource = twi0_resources, - .num_resources = ARRAY_SIZE(twi0_resources), -}; - -static struct resource twi1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TWI1, - .end = AT572D940HF_BASE_TWI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TWI1, - .end = AT572D940HF_ID_TWI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_twi1_device = { - .name = "at91_i2c", - .id = 1, - .resource = twi1_resources, - .num_resources = ARRAY_SIZE(twi1_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* pins used for TWI0 interface */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PC7, 1); - - at91_set_A_periph(AT91_PIN_PC8, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PC8, 1); - - /* pins used for TWI1 interface */ - at91_set_A_periph(AT91_PIN_PC20, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PC20, 1); - - at91_set_A_periph(AT91_PIN_PC21, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PC21, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at572d940hf_twi0_device); - platform_device_register(&at572d940hf_twi1_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_SPI0, - .end = AT572D940HF_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_SPI0, - .end = AT572D940HF_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_SPI1, - .end = AT572D940HF_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_SPI1, - .end = AT572D940HF_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PC3, AT91_PIN_PC4, AT91_PIN_PC5, AT91_PIN_PC6 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk"); - platform_device_register(&at572d940hf_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PC0, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */ - - at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk"); - platform_device_register(&at572d940hf_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter blocks - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TCB, - .end = AT572D940HF_BASE_TCB + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TC0, - .end = AT572D940HF_ID_TC0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = AT572D940HF_ID_TC1, - .end = AT572D940HF_ID_TC1, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = AT572D940HF_ID_TC2, - .end = AT572D940HF_ID_TC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_tcb_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb_resources, - .num_resources = ARRAY_SIZE(tcb_resources), -}; - -static void __init at91_add_device_tc(void) -{ - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk"); - platform_device_register(&at572d940hf_tcb_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt_resources[] = { - { - .start = AT91_BASE_SYS + AT91_RTT, - .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at572d940hf_rtt_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), -}; - -static void __init at91_add_device_rtt(void) -{ - platform_device_register(&at572d940hf_rtt_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct platform_device at572d940hf_wdt_device = { - .name = "at91_wdt", - .id = -1, - .num_resources = 0, -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at572d940hf_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ - at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US0, - .end = AT572D940HF_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US0, - .end = AT572D940HF_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA8, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PA10, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA9, 0); /* CTS0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US1, - .end = AT572D940HF_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US1, - .end = AT572D940HF_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC10, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PC9 , 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PC12, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US2, - .end = AT572D940HF_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US2, - .end = AT572D940HF_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC15, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PC14, 0); /* RXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PC17, 0); /* RTS2 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PC16, 0); /* CTS2 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - - switch (id) { - case 0: /* DBGU */ - pdev = &at572d940hf_dbgu_device; - configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); - break; - case AT572D940HF_ID_US0: - pdev = &at572d940hf_uart0_device; - configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); - break; - case AT572D940HF_ID_US1: - pdev = &at572d940hf_uart1_device; - configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); - break; - case AT572D940HF_ID_US2: - pdev = &at572d940hf_uart2_device; - configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); - break; - default: - return; - } - pdev->id = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[portnr]; -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} -void __init at91_add_device_serial(void) {} -#endif - - -/* -------------------------------------------------------------------- - * mAgic - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_MAGICV -static struct resource mAgic_resources[] = { - { - .start = AT91_MAGIC_PM_BASE, - .end = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_I_BASE, - .end = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_F_BASE, - .end = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_DB_BASE, - .end = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_REGS_BASE, - .end = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_EXTPAGE_BASE, - .end = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT572D940HF_ID_MSIRQ0, - .end = AT572D940HF_ID_MSIRQ0, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MHALT, - .end = AT572D940HF_ID_MHALT, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MEXC, - .end = AT572D940HF_ID_MEXC, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MEDMA, - .end = AT572D940HF_ID_MEDMA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mAgic_device = { - .name = "mAgic", - .id = -1, - .num_resources = ARRAY_SIZE(mAgic_resources), - .resource = mAgic_resources, -}; - -void __init at91_add_device_mAgic(void) -{ - platform_device_register(&mAgic_device); -} -#else -void __init at91_add_device_mAgic(void) {} -#endif - - -/* -------------------------------------------------------------------- */ - -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 7337617..17fae4a 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -222,6 +222,25 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq1 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -258,12 +277,29 @@ static void __init at91cap9_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91cap9_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -303,11 +339,14 @@ static void at91cap9_poweroff(void) * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ -void __init at91cap9_initialize(unsigned long main_clock) +void __init at91cap9_map_io(void) { /* Map peripherals */ iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); +} +void __init at91cap9_initialize(unsigned long main_clock) +{ at91_arch_reset = at91cap9_reset; pm_power_off = at91cap9_poweroff; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index 21020ce..cd850ed 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -181,10 +181,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -355,7 +351,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk"); platform_device_register(&at91cap9_mmc0_device); } else { /* MCI1 */ /* CLK */ @@ -373,7 +368,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk"); platform_device_register(&at91cap9_mmc1_device); } } @@ -614,7 +608,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk"); platform_device_register(&at91cap9_spi0_device); } if (enable_spi1) { @@ -622,7 +615,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk"); platform_device_register(&at91cap9_spi1_device); } } @@ -659,8 +651,6 @@ static struct platform_device at91cap9_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all three TC channels */ - at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk"); platform_device_register(&at91cap9_tcb_device); } #else @@ -1001,12 +991,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91CAP9_ID_SSC0: pdev = &at91cap9_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); break; case AT91CAP9_ID_SSC1: pdev = &at91cap9_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); break; default: return; @@ -1199,32 +1187,30 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91cap9_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91CAP9_ID_US0: pdev = &at91cap9_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91CAP9_ID_US1: pdev = &at91cap9_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91CAP9_ID_US2: pdev = &at91cap9_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1232,8 +1218,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91cap9_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 2e9ecad..b228ce9 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -18,6 +18,7 @@ #include <mach/at91rm9200.h> #include <mach/at91_pmc.h> #include <mach/at91_st.h> +#include <mach/cpu.h> #include "generic.h" #include "clock.h" @@ -191,6 +192,26 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq6 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -227,12 +248,29 @@ static void __init at91rm9200_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91rm9200_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -266,15 +304,25 @@ static void at91rm9200_reset(void) at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); } +int rm9200_type; +EXPORT_SYMBOL(rm9200_type); + +void __init at91rm9200_set_type(int type) +{ + rm9200_type = type; +} /* -------------------------------------------------------------------- * AT91RM9200 processor initialization * -------------------------------------------------------------------- */ -void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) +void __init at91rm9200_map_io(void) { /* Map peripherals */ iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); +} +void __init at91rm9200_initialize(unsigned long main_clock) +{ at91_arch_reset = at91rm9200_reset; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) @@ -288,7 +336,8 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks at91rm9200_register_clocks(); /* Initialize GPIO subsystem */ - at91_gpio_init(at91rm9200_gpio, banks); + at91_gpio_init(at91rm9200_gpio, + cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP); } diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 7b53922..a0ba475 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -644,15 +644,7 @@ static struct platform_device at91rm9200_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk"); platform_device_register(&at91rm9200_tcb0_device); - - at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk"); - at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk"); - at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk"); platform_device_register(&at91rm9200_tcb1_device); } #else @@ -849,17 +841,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91RM9200_ID_SSC0: pdev = &at91rm9200_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); break; case AT91RM9200_ID_SSC1: pdev = &at91rm9200_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); break; case AT91RM9200_ID_SSC2: pdev = &at91rm9200_ssc2_device; configure_ssc2_pins(pins); - at91_clock_associate("ssc2_clk", &pdev->dev, "ssc"); break; default: return; @@ -1109,37 +1098,34 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91rm9200_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91RM9200_ID_US0: pdev = &at91rm9200_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US1: pdev = &at91rm9200_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US2: pdev = &at91rm9200_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US3: pdev = &at91rm9200_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1147,8 +1133,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91rm9200_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 195208b..7d606b0 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -231,6 +231,28 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk), +}; + /* * The two programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -255,10 +277,27 @@ static void __init at91sam9260_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9260_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -289,7 +328,7 @@ static void at91sam9260_poweroff(void) * AT91SAM9260 processor initialization * -------------------------------------------------------------------- */ -static void __init at91sam9xe_initialize(void) +static void __init at91sam9xe_map_io(void) { unsigned long cidr, sram_size; @@ -310,18 +349,21 @@ static void __init at91sam9xe_initialize(void) iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc)); } -void __init at91sam9260_initialize(unsigned long main_clock) +void __init at91sam9260_map_io(void) { /* Map peripherals */ iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc)); if (cpu_is_at91sam9xe()) - at91sam9xe_initialize(); + at91sam9xe_map_io(); else if (cpu_is_at91sam9g20()) iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc)); else iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc)); +} +void __init at91sam9260_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9260_poweroff; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 07eb7b0..1fdeb90 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -609,7 +609,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9260_spi0_device); } if (enable_spi1) { @@ -617,7 +616,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9260_spi1_device); } } @@ -694,15 +692,7 @@ static struct platform_device at91sam9260_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk"); platform_device_register(&at91sam9260_tcb0_device); - - at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk"); - at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk"); - at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk"); platform_device_register(&at91sam9260_tcb1_device); } #else @@ -820,7 +810,6 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9260_ID_SSC: pdev = &at91sam9260_ssc_device; configure_ssc_pins(pins); - at91_clock_associate("ssc_clk", &pdev->dev, "pclk"); break; default: return; @@ -1139,47 +1128,42 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9260_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US0: pdev = &at91sam9260_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US1: pdev = &at91sam9260_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US2: pdev = &at91sam9260_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US3: pdev = &at91sam9260_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US4: pdev = &at91sam9260_uart4_device; configure_usart4_pins(); - at91_clock_associate("usart4_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US5: pdev = &at91sam9260_uart5_device; configure_usart5_pins(); - at91_clock_associate("usart5_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1187,8 +1171,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9260_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index fcad886..c148316 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,6 +178,24 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -228,6 +246,11 @@ static void __init at91sam9261_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); @@ -237,6 +260,18 @@ static void __init at91sam9261_register_clocks(void) clk_register(&hck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9261_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -267,7 +302,7 @@ static void at91sam9261_poweroff(void) * AT91SAM9261 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9261_initialize(unsigned long main_clock) +void __init at91sam9261_map_io(void) { /* Map peripherals */ iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); @@ -276,8 +311,10 @@ void __init at91sam9261_initialize(unsigned long main_clock) iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc)); else iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc)); +} - +void __init at91sam9261_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9261_poweroff; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 59fc483..3eb4538 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -426,7 +426,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9261_spi0_device); } if (enable_spi1) { @@ -434,7 +433,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9261_spi1_device); } } @@ -581,10 +579,6 @@ static struct platform_device at91sam9261_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk"); platform_device_register(&at91sam9261_tcb_device); } #else @@ -786,17 +780,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9261_ID_SSC0: pdev = &at91sam9261_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9261_ID_SSC1: pdev = &at91sam9261_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; case AT91SAM9261_ID_SSC2: pdev = &at91sam9261_ssc2_device; configure_ssc2_pins(pins); - at91_clock_associate("ssc2_clk", &pdev->dev, "pclk"); break; default: return; @@ -989,32 +980,30 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9261_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US0: pdev = &at91sam9261_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US1: pdev = &at91sam9261_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US2: pdev = &at91sam9261_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1022,8 +1011,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9261_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 249f900..dc28477 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -199,6 +199,23 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq1 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -235,12 +252,29 @@ static void __init at91sam9263_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9263_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -279,11 +313,14 @@ static void at91sam9263_poweroff(void) * AT91SAM9263 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9263_initialize(unsigned long main_clock) +void __init at91sam9263_map_io(void) { /* Map peripherals */ iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc)); +} +void __init at91sam9263_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9263_poweroff; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index fb5c23a..ffe081b 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -308,7 +308,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91sam9263_mmc0_device.dev, "mci_clk"); platform_device_register(&at91sam9263_mmc0_device); } else { /* MCI1 */ /* CLK */ @@ -339,7 +338,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk"); platform_device_register(&at91sam9263_mmc1_device); } } @@ -686,7 +684,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9263_spi0_device); } if (enable_spi1) { @@ -694,7 +691,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9263_spi1_device); } } @@ -941,8 +937,6 @@ static struct platform_device at91sam9263_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all three TC channels */ - at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk"); platform_device_register(&at91sam9263_tcb_device); } #else @@ -1171,12 +1165,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9263_ID_SSC0: pdev = &at91sam9263_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9263_ID_SSC1: pdev = &at91sam9263_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1370,32 +1362,30 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9263_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US0: pdev = &at91sam9263_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US1: pdev = &at91sam9263_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US2: pdev = &at91sam9263_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1403,8 +1393,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9263_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index c67b47f..2bb6ff9 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -184,22 +184,6 @@ static struct clk vdec_clk = { .type = CLK_TYPE_PERIPHERAL, }; -/* One additional fake clock for ohci */ -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 0, - .type = CLK_TYPE_PERIPHERAL, - .parent = &uhphs_clk, -}; - -/* One additional fake clock for second TC block */ -static struct clk tcb1_clk = { - .name = "tcb1_clk", - .pmc_mask = 0, - .type = CLK_TYPE_PERIPHERAL, - .parent = &tcb0_clk, -}; - static struct clk *periph_clocks[] __initdata = { &pioA_clk, &pioB_clk, @@ -228,8 +212,30 @@ static struct clk *periph_clocks[] __initdata = { &udphs_clk, &mmc1_clk, // irq0 - &ohci_clk, - &tcb1_clk, +}; + +static struct clk_lookup periph_clocks_lookups[] = { + /* One additional fake clock for ohci */ + CLKDEV_CON_ID("ohci_clk", &uhphs_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), }; /* @@ -256,6 +262,11 @@ static void __init at91sam9g45_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11()) clk_register(&vdec_clk); @@ -263,6 +274,18 @@ static void __init at91sam9g45_register_clocks(void) clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9g45_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -306,11 +329,14 @@ static void at91sam9g45_poweroff(void) * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9g45_initialize(unsigned long main_clock) +void __init at91sam9g45_map_io(void) { /* Map peripherals */ iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc)); +} +void __init at91sam9g45_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9g45_reset; pm_power_off = at91sam9g45_poweroff; at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 5e9f8a4..0567486 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -180,7 +180,6 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) } usbh_ehci_data = *data; - at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk"); platform_device_register(&at91_usbh_ehci_device); } #else @@ -266,10 +265,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -478,7 +473,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91sam9g45_mmc0_device.dev, "mci_clk"); platform_device_register(&at91sam9g45_mmc0_device); } else { /* MCI1 */ @@ -504,7 +498,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91sam9g45_mmc1_device.dev, "mci_clk"); platform_device_register(&at91sam9g45_mmc1_device); } @@ -801,7 +794,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9g45_spi0_device); } if (enable_spi1) { @@ -809,7 +801,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9g45_spi1_device); } } @@ -999,10 +990,7 @@ static struct platform_device at91sam9g45_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all six TC channels */ - at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk"); platform_device_register(&at91sam9g45_tcb0_device); - at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk"); platform_device_register(&at91sam9g45_tcb1_device); } #else @@ -1286,12 +1274,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9G45_ID_SSC0: pdev = &at91sam9g45_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9G45_ID_SSC1: pdev = &at91sam9g45_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1527,37 +1513,34 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9g45_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US0: pdev = &at91sam9g45_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US1: pdev = &at91sam9g45_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US2: pdev = &at91sam9g45_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US3: pdev = &at91sam9g45_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1565,8 +1548,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9g45_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 6a9d24e..1a40f16 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -190,6 +190,24 @@ static struct clk *periph_clocks[] __initdata = { // irq0 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), +}; + /* * The two programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -214,10 +232,27 @@ static void __init at91sam9rl_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9rl_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -252,7 +287,7 @@ static void at91sam9rl_poweroff(void) * AT91SAM9RL processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9rl_initialize(unsigned long main_clock) +void __init at91sam9rl_map_io(void) { unsigned long cidr, sram_size; @@ -275,7 +310,10 @@ void __init at91sam9rl_initialize(unsigned long main_clock) /* Map SRAM */ iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); +} +void __init at91sam9rl_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9rl_poweroff; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index c49262b..c296045f 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -155,10 +155,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -605,10 +601,6 @@ static struct platform_device at91sam9rl_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk"); platform_device_register(&at91sam9rl_tcb_device); } #else @@ -892,12 +884,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9RL_ID_SSC0: pdev = &at91sam9rl_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9RL_ID_SSC1: pdev = &at91sam9rl_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1141,37 +1131,34 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9rl_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US0: pdev = &at91sam9rl_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US1: pdev = &at91sam9rl_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US2: pdev = &at91sam9rl_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US3: pdev = &at91sam9rl_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1179,8 +1166,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9rl_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index ad3ec85..56ba3bd 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -37,11 +37,6 @@ unsigned long clk_get_rate(struct clk *clk) return AT91X40_MASTER_CLOCK; } -struct clk *clk_get(struct device *dev, const char *id) -{ - return NULL; -} - void __init at91x40_initialize(unsigned long main_clock) { at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 8a3fc84..ab1d463 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -35,14 +35,18 @@ #include <mach/board.h> #include <mach/gpio.h> +#include <mach/cpu.h> #include "generic.h" -static void __init onearm_map_io(void) +static void __init onearm_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -92,9 +96,9 @@ static void __init onearm_board_init(void) MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = onearm_map_io, + .map_io = at91rm9200_map_io, + .init_early = onearm_init_early, .init_irq = onearm_init_irq, .init_machine = onearm_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index cba7f77..a4924de 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init afeb9260_map_io(void) +static void __init afeb9260_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -218,9 +218,9 @@ static void __init afeb9260_board_init(void) MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = afeb9260_map_io, + .map_io = at91sam9260_map_io, + .init_early = afeb9260_init_early, .init_irq = afeb9260_init_irq, .init_machine = afeb9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c deleted file mode 100644 index 3929f1c..0000000 --- a/arch/arm/mach-at91/board-at572d940hf_ek.c +++ /dev/null @@ -1,326 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-at572d940hf_ek.c - * - * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ds1305.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/board.h> -#include <mach/gpio.h> -#include <mach/at91sam9_smc.h> - -#include "sam9_smc.h" -#include "generic.h" - - -static void __init eb_map_io(void) -{ - /* Initialize processor: 12.500 MHz crystal */ - at572d940hf_initialize(12000000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx & Tx only) */ - at91_register_uart(AT572D940HF_ID_US0, 1, 0); - - /* USART1 on ttyS2. (Rx & Tx only) */ - at91_register_uart(AT572D940HF_ID_US1, 2, 0); - - /* USART2 on ttyS3. (Tx & Rx only */ - at91_register_uart(AT572D940HF_ID_US2, 3, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init eb_init_irq(void) -{ - at572d940hf_init_interrupts(NULL); -} - - -/* - * USB Host Port - */ -static struct at91_usbh_data __initdata eb_usbh_data = { - .ports = 2, -}; - - -/* - * USB Device Port - */ -static struct at91_udc_data __initdata eb_udc_data = { - .vbus_pin = 0, /* no VBUS detection,UDC always on */ - .pullup_pin = 0, /* pull-up driven by UDC */ -}; - - -/* - * MCI (SD/MMC) - */ -static struct at91_mmc_data __initdata eb_mmc_data = { - .wire4 = 1, -/* .det_pin = ... not connected */ -/* .wp_pin = ... not connected */ -/* .vcc_pin = ... not connected */ -}; - - -/* - * MACB Ethernet device - */ -static struct at91_eth_data __initdata eb_eth_data = { - .phy_irq_pin = AT91_PIN_PB25, - .is_rmii = 1, -}; - -/* - * NOR flash - */ - -static struct mtd_partition eb_nor_partitions[] = { - { - .name = "Raw Environment", - .offset = 0, - .size = SZ_4M, - .mask_flags = 0, - }, - { - .name = "OS FS", - .offset = MTDPART_OFS_APPEND, - .size = 3 * SZ_1M, - .mask_flags = 0, - }, - { - .name = "APP FS", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - }, -}; - -static void nor_flash_set_vpp(struct map_info* mi, int i) { -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 4, - .parts = eb_nor_partitions, - .nr_parts = ARRAY_SIZE(eb_nor_partitions), - .set_vpp = nor_flash_set_vpp, -}; - -static struct resource nor_flash_resources[] = { - { - .start = AT91_CHIPSELECT_0, - .end = AT91_CHIPSELECT_0 + SZ_16M - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_flash_data, - }, - .resource = nor_flash_resources, - .num_resources = ARRAY_SIZE(nor_flash_resources), -}; - -static struct sam9_smc_config __initdata eb_nor_smc_config = { - .ncs_read_setup = 1, - .nrd_setup = 1, - .ncs_write_setup = 1, - .nwe_setup = 1, - - .ncs_read_pulse = 7, - .nrd_pulse = 7, - .ncs_write_pulse = 7, - .nwe_pulse = 7, - - .read_cycle = 9, - .write_cycle = 9, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32, - .tdf_cycles = 1, -}; - -static void __init eb_add_device_nor(void) -{ - /* configure chip-select 0 (NOR) */ - sam9_smc_configure(0, &eb_nor_smc_config); - platform_device_register(&nor_flash); -} - -/* - * NAND flash - */ -static struct mtd_partition __initdata eb_nand_partition[] = { - { - .name = "Partition 1", - .offset = 0, - .size = SZ_16M, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(eb_nand_partition); - return eb_nand_partition; -} - -static struct atmel_nand_data __initdata eb_nand_data = { - .ale = 22, - .cle = 21, -/* .det_pin = ... not connected */ -/* .rdy_pin = AT91_PIN_PC16, */ - .enable_pin = AT91_PIN_PA15, - .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif -}; - -static struct sam9_smc_config __initdata eb_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 0, - .ncs_write_setup = 1, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 12, -}; - -static void __init eb_add_device_nand(void) -{ - /* setup bus-width (8 or 16) */ - if (eb_nand_data.bus_width_16) - eb_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - eb_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &eb_nand_smc_config); - - at91_add_device_nand(&eb_nand_data); -} - - -/* - * SPI devices - */ -static struct resource rtc_resources[] = { - [0] = { - .start = AT572D940HF_ID_IRQ1, - .end = AT572D940HF_ID_IRQ1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct ds1305_platform_data ds1306_data = { - .is_ds1306 = true, - .en_1hz = false, -}; - -static struct spi_board_info eb_spi_devices[] = { - { /* RTC Dallas DS1306 */ - .modalias = "rtc-ds1305", - .chip_select = 3, - .mode = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA, - .max_speed_hz = 500000, - .bus_num = 0, - .irq = AT572D940HF_ID_IRQ1, - .platform_data = (void *) &ds1306_data, - }, -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* Dataflash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -}; - -static void __init eb_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&eb_usbh_data); - /* USB Device */ - at91_add_device_udc(&eb_udc_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* NOR */ - eb_add_device_nor(); - /* NAND */ - eb_add_device_nand(); - /* SPI */ - at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices)); - /* MMC */ - at91_add_device_mmc(0, &eb_mmc_data); - /* Ethernet */ - at91_add_device_eth(&eb_eth_data); - /* mAgic */ - at91_add_device_mAgic(); -} - -MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB") - /* Maintainer: Atmel <costa.antonior@gmail.com> */ - .boot_params = AT91_SDRAM_BASE + 0x100, - .timer = &at91sam926x_timer, - .map_io = eb_map_io, - .init_irq = eb_init_irq, - .init_machine = eb_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index b54e3e6..148fccb 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -45,7 +45,7 @@ #include "generic.h" -static void __init cam60_map_io(void) +static void __init cam60_init_early(void) { /* Initialize processor: 10 MHz crystal */ at91sam9260_initialize(10000000); @@ -198,9 +198,9 @@ static void __init cam60_board_init(void) MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cam60_map_io, + .map_io = at91sam9260_map_io, + .init_early = cam60_init_early, .init_irq = cam60_init_irq, .init_machine = cam60_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index e727444..1904fdf 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -44,12 +44,13 @@ #include <mach/gpio.h> #include <mach/at91cap9_matrix.h> #include <mach/at91sam9_smc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init cap9adk_map_io(void) +static void __init cap9adk_init_early(void) { /* Initialize processor: 12 MHz crystal */ at91cap9_initialize(12000000); @@ -187,11 +188,6 @@ static struct atmel_nand_data __initdata cap9adk_nand_data = { // .rdy_pin = ... not connected .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata cap9adk_nand_smc_config = { @@ -219,6 +215,7 @@ static void __init cap9adk_add_device_nand(void) csa = at91_sys_read(AT91_MATRIX_EBICSA); at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); + cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (cap9adk_nand_data.bus_width_16) cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -399,9 +396,9 @@ static void __init cap9adk_board_init(void) MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cap9adk_map_io, + .map_io = at91cap9_map_io, + .init_early = cap9adk_init_early, .init_irq = cap9adk_init_irq, .init_machine = cap9adk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 295e1e7..f36b186 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -40,10 +40,10 @@ #include "generic.h" -static void __init carmeva_map_io(void) +static void __init carmeva_init_early(void) { /* Initialize processor: 20.000 MHz crystal */ - at91rm9200_initialize(20000000, AT91RM9200_BGA); + at91rm9200_initialize(20000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -162,9 +162,9 @@ static void __init carmeva_board_init(void) MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = carmeva_map_io, + .map_io = at91rm9200_map_io, + .init_early = carmeva_init_early, .init_irq = carmeva_init_irq, .init_machine = carmeva_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 3838594..9805110 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -47,7 +47,7 @@ #include "sam9_smc.h" #include "generic.h" -static void __init cpu9krea_map_io(void) +static void __init cpu9krea_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -375,9 +375,9 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260") MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") #endif /* Maintainer: Eric Benard - EUKREA Electromatique */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cpu9krea_map_io, + .map_io = at91sam9260_map_io, + .init_early = cpu9krea_init_early, .init_irq = cpu9krea_init_irq, .init_machine = cpu9krea_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 2f4dd8c..6daabe3 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -38,6 +38,7 @@ #include <mach/board.h> #include <mach/gpio.h> #include <mach/at91rm9200_mc.h> +#include <mach/cpu.h> #include "generic.h" @@ -50,10 +51,13 @@ static struct gpio_led cpuat91_leds[] = { }, }; -static void __init cpuat91_map_io(void) +static void __init cpuat91_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -175,9 +179,9 @@ static void __init cpuat91_board_init(void) MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = cpuat91_map_io, + .map_io = at91rm9200_map_io, + .init_early = cpuat91_init_early, .init_irq = cpuat91_init_irq, .init_machine = cpuat91_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 464839d..d98bcec 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -43,10 +43,10 @@ #include "generic.h" -static void __init csb337_map_io(void) +static void __init csb337_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400, AT91RM9200_BGA); + at91rm9200_initialize(3686400); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -257,9 +257,9 @@ static void __init csb337_board_init(void) MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = csb337_map_io, + .map_io = at91rm9200_map_io, + .init_early = csb337_init_early, .init_irq = csb337_init_irq, .init_machine = csb337_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 431688c..019aab4 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -40,10 +40,10 @@ #include "generic.h" -static void __init csb637_map_io(void) +static void __init csb637_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400, AT91RM9200_BGA); + at91rm9200_initialize(3686400); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -138,9 +138,9 @@ static void __init csb637_board_init(void) MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = csb637_map_io, + .map_io = at91rm9200_map_io, + .init_early = csb637_init_early, .init_irq = csb637_init_irq, .init_machine = csb637_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index d8df59a..d2023f2 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -35,7 +35,7 @@ static void __init at91eb01_init_irq(void) at91x40_init_interrupts(NULL); } -static void __init at91eb01_map_io(void) +static void __init at91eb01_init_early(void) { at91x40_initialize(40000000); } @@ -43,7 +43,7 @@ static void __init at91eb01_map_io(void) MACHINE_START(AT91EB01, "Atmel AT91 EB01") /* Maintainer: Greg Ungerer <gerg@snapgear.com> */ .timer = &at91x40_timer, + .init_early = at91eb01_init_early, .init_irq = at91eb01_init_irq, - .map_io = at91eb01_map_io, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 6cf6566..e948453 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -40,10 +40,10 @@ #include "generic.h" -static void __init eb9200_map_io(void) +static void __init eb9200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -120,9 +120,9 @@ static void __init eb9200_board_init(void) } MACHINE_START(ATEB9200, "Embest ATEB9200") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = eb9200_map_io, + .map_io = at91rm9200_map_io, + .init_early = eb9200_init_early, .init_irq = eb9200_init_irq, .init_machine = eb9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index de2fd04..a6f57fa 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -38,14 +38,18 @@ #include <mach/board.h> #include <mach/gpio.h> +#include <mach/cpu.h> #include "generic.h" -static void __init ecb_at91map_io(void) +static void __init ecb_at91init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); @@ -168,9 +172,9 @@ static void __init ecb_at91board_init(void) MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = ecb_at91map_io, + .map_io = at91rm9200_map_io, + .init_early = ecb_at91init_early, .init_irq = ecb_at91init_irq, .init_machine = ecb_at91board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index a158a0c..bfc0062 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -26,11 +26,16 @@ #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/cpu.h> + #include "generic.h" -static void __init eco920_map_io(void) +static void __init eco920_init_early(void) { - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -86,21 +91,6 @@ static struct platform_device eco920_flash = { .num_resources = 1, }; -static struct resource at91_beeper_resources[] = { - [0] = { - .start = AT91RM9200_BASE_TC3, - .end = AT91RM9200_BASE_TC3 + 0x39, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device at91_beeper = { - .name = "at91_beeper", - .id = 0, - .resource = at91_beeper_resources, - .num_resources = ARRAY_SIZE(at91_beeper_resources), -}; - static struct spi_board_info eco920_spi_devices[] = { { /* CAN controller */ .modalias = "tlv5638", @@ -139,18 +129,14 @@ static void __init eco920_board_init(void) AT91_SMC_TDF_(1) /* float time */ ); - at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper"); - at91_set_B_periph(AT91_PIN_PB6, 0); - platform_device_register(&at91_beeper); - at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices)); } MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = eco920_map_io, + .map_io = at91rm9200_map_io, + .init_early = eco920_init_early, .init_irq = eco920_init_irq, .init_machine = eco920_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index c8a62dc..466c063 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -37,7 +37,7 @@ #include "generic.h" -static void __init flexibity_map_io(void) +static void __init flexibity_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -154,9 +154,9 @@ static void __init flexibity_board_init(void) MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = flexibity_map_io, + .map_io = at91sam9260_map_io, + .init_early = flexibity_init_early, .init_irq = flexibity_init_irq, .init_machine = flexibity_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index dfc7dfe..e2d1dc9 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -57,7 +57,7 @@ */ -static void __init foxg20_map_io(void) +static void __init foxg20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -266,9 +266,9 @@ static void __init foxg20_board_init(void) MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") /* Maintainer: Sergio Tanzilli */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = foxg20_map_io, + .map_io = at91sam9260_map_io, + .init_early = foxg20_init_early, .init_irq = foxg20_init_irq, .init_machine = foxg20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index bc28136..1d4f36b 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -38,9 +38,9 @@ #include "sam9_smc.h" #include "generic.h" -static void __init gsia18s_map_io(void) +static void __init gsia18s_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI). @@ -576,9 +576,9 @@ static void __init gsia18s_board_init(void) } MACHINE_START(GSIA18S, "GS_IA18_S") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = gsia18s_map_io, + .map_io = at91sam9260_map_io, + .init_early = gsia18s_init_early, .init_irq = init_irq, .init_machine = gsia18s_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index d2e1f4e..9b003ff 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -35,14 +35,18 @@ #include <mach/board.h> #include <mach/gpio.h> +#include <mach/cpu.h> #include "generic.h" -static void __init kafa_map_io(void) +static void __init kafa_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); @@ -94,9 +98,9 @@ static void __init kafa_board_init(void) MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = kafa_map_io, + .map_io = at91rm9200_map_io, + .init_early = kafa_init_early, .init_irq = kafa_init_irq, .init_machine = kafa_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index a13d206..a813a74 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -36,16 +36,19 @@ #include <mach/board.h> #include <mach/gpio.h> - +#include <mach/cpu.h> #include <mach/at91rm9200_mc.h> #include "generic.h" -static void __init kb9202_map_io(void) +static void __init kb9202_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 10 MHz crystal */ - at91rm9200_initialize(10000000, AT91RM9200_PQFP); + at91rm9200_initialize(10000000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); @@ -136,9 +139,9 @@ static void __init kb9202_board_init(void) MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = kb9202_map_io, + .map_io = at91rm9200_map_io, + .init_early = kb9202_init_early, .init_irq = kb9202_init_irq, .init_machine = kb9202_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index fe5f1d4..961e805 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -51,7 +51,7 @@ #include "generic.h" -static void __init neocore926_map_io(void) +static void __init neocore926_init_early(void) { /* Initialize processor: 20 MHz crystal */ at91sam9263_initialize(20000000); @@ -387,9 +387,9 @@ static void __init neocore926_board_init(void) MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") /* Maintainer: ADENEO */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = neocore926_map_io, + .map_io = at91sam9263_map_io, + .init_early = neocore926_init_early, .init_irq = neocore926_init_irq, .init_machine = neocore926_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index feb6578..21a21af 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -37,9 +37,9 @@ #include "generic.h" -static void __init pcontrol_g20_map_io(void) +static void __init pcontrol_g20_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS @@ -222,9 +222,9 @@ static void __init pcontrol_g20_board_init(void) MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = pcontrol_g20_map_io, + .map_io = at91sam9260_map_io, + .init_early = pcontrol_g20_init_early, .init_irq = init_irq, .init_machine = pcontrol_g20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 55dad3a..756cc2a 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,10 +43,10 @@ #include "generic.h" -static void __init picotux200_map_io(void) +static void __init picotux200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -123,9 +123,9 @@ static void __init picotux200_board_init(void) MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = picotux200_map_io, + .map_io = at91rm9200_map_io, + .init_early = picotux200_init_early, .init_irq = picotux200_init_irq, .init_machine = picotux200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 69d15a8..d1a6001 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9260_initialize(12000000); @@ -268,9 +268,9 @@ static void __init ek_board_init(void) MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 4c1047c..aef9627 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -45,10 +45,10 @@ #include "generic.h" -static void __init dk_map_io(void) +static void __init dk_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); @@ -227,9 +227,9 @@ static void __init dk_board_init(void) MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = dk_map_io, + .map_io = at91rm9200_map_io, + .init_early = dk_init_early, .init_irq = dk_init_irq, .init_machine = dk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 9df1be8..015a021 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -45,10 +45,10 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); @@ -193,9 +193,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = ek_map_io, + .map_io = at91rm9200_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 25a26be..aaf1bf0 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -44,7 +44,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -212,9 +212,9 @@ static void __init ek_board_init(void) MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index de1816e..d600dc1 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -44,12 +44,13 @@ #include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -191,11 +192,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -218,6 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -356,9 +353,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 14acc90..f897f84 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -48,12 +48,13 @@ #include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9261_initialize(18432000); @@ -197,11 +198,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC15, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -224,6 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -623,9 +620,9 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") #endif /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9261_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index bfe490d..605b26f 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -47,12 +47,13 @@ #include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 16.367 MHz crystal */ at91sam9263_initialize(16367660); @@ -198,11 +199,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -225,6 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -454,9 +451,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9263_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index ca8198b..7624cf0 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -43,6 +43,7 @@ #include <mach/board.h> #include <mach/gpio.h> #include <mach/at91sam9_smc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" @@ -60,7 +61,7 @@ static int inline ek_have_2mmc(void) } -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -175,11 +176,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -202,6 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -406,18 +403,18 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 6c999db..063c95d 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -41,12 +41,13 @@ #include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9g45_initialize(12000000); @@ -155,11 +156,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC8, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -182,6 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -424,9 +421,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9g45_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 3bf3408..effb399 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -38,7 +38,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9rl_initialize(12000000); @@ -329,9 +329,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9rl_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 17f7d9b..3eb0a11 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -40,7 +40,7 @@ #define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x)) -static void __init snapper9260_map_io(void) +static void __init snapper9260_init_early(void) { at91sam9260_initialize(18432000); @@ -178,9 +178,9 @@ static void __init snapper9260_board_init(void) } MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = snapper9260_map_io, + .map_io = at91sam9260_map_io, + .init_early = snapper9260_init_early, .init_irq = snapper9260_init_irq, .init_machine = snapper9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index f8902b11..5e5c856 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -32,7 +32,7 @@ #include "generic.h" -void __init stamp9g20_map_io(void) +void __init stamp9g20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -44,9 +44,9 @@ void __init stamp9g20_map_io(void) at91_set_serial_console(0); } -static void __init stamp9g20evb_map_io(void) +static void __init stamp9g20evb_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS @@ -54,9 +54,9 @@ static void __init stamp9g20evb_map_io(void) | ATMEL_UART_DCD | ATMEL_UART_RI); } -static void __init portuxg20_map_io(void) +static void __init portuxg20_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS @@ -298,18 +298,18 @@ static void __init stamp9g20evb_board_init(void) MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = portuxg20_map_io, + .map_io = at91sam9260_map_io, + .init_early = portuxg20_init_early, .init_irq = init_irq, .init_machine = portuxg20_board_init, MACHINE_END MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = stamp9g20evb_map_io, + .map_io = at91sam9260_map_io, + .init_early = stamp9g20evb_init_early, .init_irq = init_irq, .init_machine = stamp9g20evb_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 07784ba..0e784e6 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9260_initialize(12000000); @@ -228,9 +228,9 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index b6145089..cf626dd 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -47,7 +47,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.00 MHz crystal */ at91sam9263_initialize(12000000); @@ -244,9 +244,9 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9263_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index e0f0080..c208cc3 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -45,14 +45,18 @@ #include <mach/board.h> #include <mach/gpio.h> #include <mach/at91rm9200_mc.h> +#include <mach/cpu.h> #include "generic.h" -static void __init yl9200_map_io(void) +static void __init yl9200_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); @@ -594,9 +598,9 @@ static void __init yl9200_board_init(void) MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = yl9200_map_io, + .map_io = at91rm9200_map_io, + .init_early = yl9200_init_early, .init_irq = yl9200_init_irq, .init_machine = yl9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 9113da6..61873f3 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -163,7 +163,7 @@ static struct clk udpck = { .parent = &pllb, .mode = pmc_sys_mode, }; -static struct clk utmi_clk = { +struct clk utmi_clk = { .name = "utmi_clk", .parent = &main_clk, .pmc_mask = AT91_PMC_UPLLEN, /* in CKGR_UCKR */ @@ -182,7 +182,7 @@ static struct clk uhpck = { * memory, interfaces to on-chip peripherals, the AIC, and sometimes more * (e.g baud rate generation). It's sourced from one of the primary clocks. */ -static struct clk mck = { +struct clk mck = { .name = "mck", .pmc_mask = AT91_PMC_MCKRDY, /* in PMC_SR */ }; @@ -215,43 +215,6 @@ static struct clk __init *at91_css_to_clk(unsigned long css) return NULL; } -/* - * Associate a particular clock with a function (eg, "uart") and device. - * The drivers can then request the same 'function' with several different - * devices and not care about which clock name to use. - */ -void __init at91_clock_associate(const char *id, struct device *dev, const char *func) -{ - struct clk *clk = clk_get(NULL, id); - - if (!dev || !clk || !IS_ERR(clk_get(dev, func))) - return; - - clk->function = func; - clk->dev = dev; -} - -/* clocks cannot be de-registered no refcounting necessary */ -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *clk; - - list_for_each_entry(clk, &clocks, node) { - if (strcmp(id, clk->name) == 0) - return clk; - if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0) - return clk; - } - - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - static void __clk_enable(struct clk *clk) { if (clk->parent) @@ -498,32 +461,38 @@ postcore_initcall(at91_clk_debugfs_init); /*------------------------------------------------------------------------*/ /* Register a new clock */ +static void __init at91_clk_add(struct clk *clk) +{ + list_add_tail(&clk->node, &clocks); + + clk->cl.con_id = clk->name; + clk->cl.clk = clk; + clkdev_add(&clk->cl); +} + int __init clk_register(struct clk *clk) { if (clk_is_peripheral(clk)) { if (!clk->parent) clk->parent = &mck; clk->mode = pmc_periph_mode; - list_add_tail(&clk->node, &clocks); } else if (clk_is_sys(clk)) { clk->parent = &mck; clk->mode = pmc_sys_mode; - - list_add_tail(&clk->node, &clocks); } #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS else if (clk_is_programmable(clk)) { clk->mode = pmc_sys_mode; init_programmable_clock(clk); - list_add_tail(&clk->node, &clocks); } #endif + at91_clk_add(clk); + return 0; } - /*------------------------------------------------------------------------*/ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) @@ -630,7 +599,7 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20() || - cpu_is_at91sam9g10() || cpu_is_at572d940hf()) { + cpu_is_at91sam9g10()) { uhpck.pmc_mask = AT91SAM926x_PMC_UHP; udpck.pmc_mask = AT91SAM926x_PMC_UDP; } else if (cpu_is_at91cap9()) { @@ -754,19 +723,19 @@ int __init at91_clock_init(unsigned long main_clock) /* Register the PMC's standard clocks */ for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) - list_add_tail(&standard_pmc_clocks[i]->node, &clocks); + at91_clk_add(standard_pmc_clocks[i]); if (cpu_has_pllb()) - list_add_tail(&pllb.node, &clocks); + at91_clk_add(&pllb); if (cpu_has_uhp()) - list_add_tail(&uhpck.node, &clocks); + at91_clk_add(&uhpck); if (cpu_has_udpfs()) - list_add_tail(&udpck.node, &clocks); + at91_clk_add(&udpck); if (cpu_has_utmi()) - list_add_tail(&utmi_clk.node, &clocks); + at91_clk_add(&utmi_clk); /* MCK and CPU clock are "always on" */ clk_enable(&mck); diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h index 6cf4b78..c2e63e4 100644 --- a/arch/arm/mach-at91/clock.h +++ b/arch/arm/mach-at91/clock.h @@ -6,6 +6,8 @@ * published by the Free Software Foundation. */ +#include <linux/clkdev.h> + #define CLK_TYPE_PRIMARY 0x1 #define CLK_TYPE_PLL 0x2 #define CLK_TYPE_PROGRAMMABLE 0x4 @@ -16,8 +18,7 @@ struct clk { struct list_head node; const char *name; /* unique clock name */ - const char *function; /* function of the clock */ - struct device *dev; /* device associated with function */ + struct clk_lookup cl; unsigned long rate_hz; struct clk *parent; u32 pmc_mask; @@ -29,3 +30,18 @@ struct clk { extern int __init clk_register(struct clk *clk); +extern struct clk mck; +extern struct clk utmi_clk; + +#define CLKDEV_CON_ID(_id, _clk) \ + { \ + .con_id = _id, \ + .clk = _clk, \ + } + +#define CLKDEV_CON_DEV_ID(_con_id, _dev_id, _clk) \ + { \ + .con_id = _con_id, \ + .dev_id = _dev_id, \ + .clk = _clk, \ + } diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 0c66deb..8ff3418 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -8,8 +8,21 @@ * published by the Free Software Foundation. */ +#include <linux/clkdev.h> + + /* Map io */ +extern void __init at91rm9200_map_io(void); +extern void __init at91sam9260_map_io(void); +extern void __init at91sam9261_map_io(void); +extern void __init at91sam9263_map_io(void); +extern void __init at91sam9rl_map_io(void); +extern void __init at91sam9g45_map_io(void); +extern void __init at91x40_map_io(void); +extern void __init at91cap9_map_io(void); + /* Processors */ -extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks); +extern void __init at91rm9200_set_type(int type); +extern void __init at91rm9200_initialize(unsigned long main_clock); extern void __init at91sam9260_initialize(unsigned long main_clock); extern void __init at91sam9261_initialize(unsigned long main_clock); extern void __init at91sam9263_initialize(unsigned long main_clock); @@ -17,7 +30,6 @@ extern void __init at91sam9rl_initialize(unsigned long main_clock); extern void __init at91sam9g45_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); extern void __init at91cap9_initialize(unsigned long main_clock); -extern void __init at572d940hf_initialize(unsigned long main_clock); /* Interrupts */ extern void __init at91rm9200_init_interrupts(unsigned int priority[]); @@ -28,7 +40,6 @@ extern void __init at91sam9rl_init_interrupts(unsigned int priority[]); extern void __init at91sam9g45_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); extern void __init at91cap9_init_interrupts(unsigned int priority[]); -extern void __init at572d940hf_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); /* Timer */ @@ -39,8 +50,19 @@ extern struct sys_timer at91x40_timer; /* Clocks */ extern int __init at91_clock_init(unsigned long main_clock); +/* + * function to specify the clock of the default console. As we do not + * use the device/driver bus, the dev_name is not intialize. So we need + * to link the clock to a specific con_id only "usart" + */ +extern void __init at91rm9200_set_console_clock(int id); +extern void __init at91sam9260_set_console_clock(int id); +extern void __init at91sam9261_set_console_clock(int id); +extern void __init at91sam9263_set_console_clock(int id); +extern void __init at91sam9rl_set_console_clock(int id); +extern void __init at91sam9g45_set_console_clock(int id); +extern void __init at91cap9_set_console_clock(int id); struct device; -extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func); /* Power Management */ extern void at91_irq_suspend(void); diff --git a/arch/arm/mach-at91/include/mach/at572d940hf.h b/arch/arm/mach-at91/include/mach/at572d940hf.h deleted file mode 100644 index be510cf..0000000 --- a/arch/arm/mach-at91/include/mach/at572d940hf.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * include/mach/at572d940hf.h - * - * Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2008 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef AT572D940HF_H -#define AT572D940HF_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ -#define AT572D940HF_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT572D940HF_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT572D940HF_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT572D940HF_ID_EMAC 5 /* MACB ethernet controller */ -#define AT572D940HF_ID_US0 6 /* USART 0 */ -#define AT572D940HF_ID_US1 7 /* USART 1 */ -#define AT572D940HF_ID_US2 8 /* USART 2 */ -#define AT572D940HF_ID_MCI 9 /* Multimedia Card Interface */ -#define AT572D940HF_ID_UDP 10 /* USB Device Port */ -#define AT572D940HF_ID_TWI0 11 /* Two-Wire Interface 0 */ -#define AT572D940HF_ID_SPI0 12 /* Serial Peripheral Interface 0 */ -#define AT572D940HF_ID_SPI1 13 /* Serial Peripheral Interface 1 */ -#define AT572D940HF_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT572D940HF_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT572D940HF_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT572D940HF_ID_TC0 17 /* Timer Counter 0 */ -#define AT572D940HF_ID_TC1 18 /* Timer Counter 1 */ -#define AT572D940HF_ID_TC2 19 /* Timer Counter 2 */ -#define AT572D940HF_ID_UHP 20 /* USB Host port */ -#define AT572D940HF_ID_SSC3 21 /* Serial Synchronous Controller 3 */ -#define AT572D940HF_ID_TWI1 22 /* Two-Wire Interface 1 */ -#define AT572D940HF_ID_CAN0 23 /* CAN Controller 0 */ -#define AT572D940HF_ID_CAN1 24 /* CAN Controller 1 */ -#define AT572D940HF_ID_MHALT 25 /* mAgicV HALT line */ -#define AT572D940HF_ID_MSIRQ0 26 /* mAgicV SIRQ0 line */ -#define AT572D940HF_ID_MEXC 27 /* mAgicV exception line */ -#define AT572D940HF_ID_MEDMA 28 /* mAgicV end of DMA line */ -#define AT572D940HF_ID_IRQ0 29 /* External Interrupt Source (IRQ0) */ -#define AT572D940HF_ID_IRQ1 30 /* External Interrupt Source (IRQ1) */ -#define AT572D940HF_ID_IRQ2 31 /* External Interrupt Source (IRQ2) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT572D940HF_BASE_TCB 0xfffa0000 -#define AT572D940HF_BASE_TC0 0xfffa0000 -#define AT572D940HF_BASE_TC1 0xfffa0040 -#define AT572D940HF_BASE_TC2 0xfffa0080 -#define AT572D940HF_BASE_UDP 0xfffa4000 -#define AT572D940HF_BASE_MCI 0xfffa8000 -#define AT572D940HF_BASE_TWI0 0xfffac000 -#define AT572D940HF_BASE_US0 0xfffb0000 -#define AT572D940HF_BASE_US1 0xfffb4000 -#define AT572D940HF_BASE_US2 0xfffb8000 -#define AT572D940HF_BASE_SSC0 0xfffbc000 -#define AT572D940HF_BASE_SSC1 0xfffc0000 -#define AT572D940HF_BASE_SSC2 0xfffc4000 -#define AT572D940HF_BASE_SPI0 0xfffc8000 -#define AT572D940HF_BASE_SPI1 0xfffcc000 -#define AT572D940HF_BASE_SSC3 0xfffd0000 -#define AT572D940HF_BASE_TWI1 0xfffd4000 -#define AT572D940HF_BASE_EMAC 0xfffd8000 -#define AT572D940HF_BASE_CAN0 0xfffdc000 -#define AT572D940HF_BASE_CAN1 0xfffe0000 -#define AT91_BASE_SYS 0xffffea00 - - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) -#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) - -#define AT91_USART0 AT572D940HF_ID_US0 -#define AT91_USART1 AT572D940HF_ID_US1 -#define AT91_USART2 AT572D940HF_ID_US2 - - -/* - * Internal Memory. - */ -#define AT572D940HF_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT572D940HF_SRAM_SIZE (48 * SZ_1K) /* Internal SRAM size (48Kb) */ - -#define AT572D940HF_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT572D940HF_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT572D940HF_UHP_BASE 0x00500000 /* USB Host controller */ - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h b/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h deleted file mode 100644 index b6751df..0000000 --- a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * include/mach//at572d940hf_matrix.h - * - * Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2008 Atmel - * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef AT572D940HF_MATRIX_H -#define AT572D940HF_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ - -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0x7 << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ - -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_SFR0 (AT91_MATRIX + 0x110) /* Special Function Register 0 */ -#define AT91_MATRIX_SFR1 (AT91_MATRIX + 0x114) /* Special Function Register 1 */ -#define AT91_MATRIX_SFR2 (AT91_MATRIX + 0x118) /* Special Function Register 2 */ -#define AT91_MATRIX_SFR3 (AT91_MATRIX + 0x11C) /* Special Function Register 3 */ -#define AT91_MATRIX_SFR4 (AT91_MATRIX + 0x120) /* Special Function Register 4 */ -#define AT91_MATRIX_SFR5 (AT91_MATRIX + 0x124) /* Special Function Register 5 */ -#define AT91_MATRIX_SFR6 (AT91_MATRIX + 0x128) /* Special Function Register 6 */ -#define AT91_MATRIX_SFR7 (AT91_MATRIX + 0x12C) /* Special Function Register 7 */ -#define AT91_MATRIX_SFR8 (AT91_MATRIX + 0x130) /* Special Function Register 8 */ -#define AT91_MATRIX_SFR9 (AT91_MATRIX + 0x134) /* Special Function Register 9 */ -#define AT91_MATRIX_SFR10 (AT91_MATRIX + 0x138) /* Special Function Register 10 */ -#define AT91_MATRIX_SFR11 (AT91_MATRIX + 0x13C) /* Special Function Register 11 */ -#define AT91_MATRIX_SFR12 (AT91_MATRIX + 0x140) /* Special Function Register 12 */ -#define AT91_MATRIX_SFR13 (AT91_MATRIX + 0x144) /* Special Function Register 13 */ -#define AT91_MATRIX_SFR14 (AT91_MATRIX + 0x148) /* Special Function Register 14 */ -#define AT91_MATRIX_SFR15 (AT91_MATRIX + 0x14C) /* Special Function Register 15 */ - - -/* - * The following registers / bits are not defined in the Datasheet (Revision A) - */ - -#define AT91_MATRIX_TCR (AT91_MATRIX + 0x100) /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_ITCM_64 (7 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index 9c6af97..6659938 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -20,8 +20,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ #define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ #define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ @@ -123,6 +121,4 @@ #define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */ #define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ -#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 - #endif diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h index 7898315..99e0f8d 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h @@ -19,8 +19,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripheral */ #define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index 4e79036..8b6bf83 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -20,8 +20,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 2b56185..eafbdda 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index 2091f1e..e2d3482 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index a526869..659304a 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Controller Interrupt */ #define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */ #define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */ #define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */ @@ -131,8 +129,6 @@ #define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */ #define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */ -#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 - #define CONSISTENT_DMA_SIZE SZ_4M /* diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index 87ba851..41dbbe6 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -17,8 +17,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Controller */ #define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h index 063ac44..a152ff8 100644 --- a/arch/arm/mach-at91/include/mach/at91x40.h +++ b/arch/arm/mach-at91/include/mach/at91x40.h @@ -15,8 +15,6 @@ /* * IRQ list. */ -#define AT91_ID_FIQ 0 /* FIQ */ -#define AT91_ID_SYS 1 /* System Peripheral */ #define AT91X40_ID_USART0 2 /* USART port 0 */ #define AT91X40_ID_USART1 3 /* USART port 1 */ #define AT91X40_ID_TC0 4 /* Timer/Counter 0 */ diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 2b499eb..ed544a0 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -90,7 +90,7 @@ struct at91_eth_data { extern void __init at91_add_device_eth(struct at91_eth_data *data); #if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) || defined(CONFIG_ARCH_AT572D940HF) + || defined(CONFIG_ARCH_AT91SAM9G45) #define eth_platform_data at91_eth_data #endif @@ -140,6 +140,7 @@ extern void __init at91_set_serial_console(unsigned portnr); extern struct platform_device *atmel_default_console_device; struct atmel_uart_data { + int num; /* port num */ short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virt. base address, if any */ @@ -203,9 +204,6 @@ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); extern void __init at91_pwm_leds(struct gpio_led *leds, int nr); - /* AT572D940HF DSP */ -extern void __init at91_add_device_mAgic(void); - /* FIXME: this needs a better location, but gets stuff building again */ extern int at91_suspend_entering_slow_clock(void); diff --git a/arch/arm/mach-at91/include/mach/clkdev.h b/arch/arm/mach-at91/include/mach/clkdev.h new file mode 100644 index 0000000..04b37a8 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 0700f21..df966c2 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -34,8 +34,6 @@ #define ARCH_ID_AT91SAM9XE256 0x329a93a0 #define ARCH_ID_AT91SAM9XE512 0x329aa3a0 -#define ARCH_ID_AT572D940HF 0x0e0303e0 - #define ARCH_ID_AT91M40800 0x14080044 #define ARCH_ID_AT91R40807 0x44080746 #define ARCH_ID_AT91M40807 0x14080745 @@ -90,9 +88,16 @@ static inline unsigned long at91cap9_rev_identify(void) #endif #ifdef CONFIG_ARCH_AT91RM9200 +extern int rm9200_type; +#define ARCH_REVISON_9200_BGA (0 << 0) +#define ARCH_REVISON_9200_PQFP (1 << 0) #define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200) +#define cpu_is_at91rm9200_bga() (!cpu_is_at91rm9200_pqfp()) +#define cpu_is_at91rm9200_pqfp() (cpu_is_at91rm9200() && rm9200_type & ARCH_REVISON_9200_PQFP) #else #define cpu_is_at91rm9200() (0) +#define cpu_is_at91rm9200_bga() (0) +#define cpu_is_at91rm9200_pqfp() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9260 @@ -181,12 +186,6 @@ static inline unsigned long at91cap9_rev_identify(void) #define cpu_is_at91cap9_revC() (0) #endif -#ifdef CONFIG_ARCH_AT572D940HF -#define cpu_is_at572d940hf() (at91_cpu_identify() == ARCH_ID_AT572D940HF) -#else -#define cpu_is_at572d940hf() (0) -#endif - /* * Since this is ARM, we will never run on any AVR32 CPU. But these * definitions may reduce clutter in common drivers. diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 3d64a75..1008b9f 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -32,13 +32,17 @@ #include <mach/at91cap9.h> #elif defined(CONFIG_ARCH_AT91X40) #include <mach/at91x40.h> -#elif defined(CONFIG_ARCH_AT572D940HF) -#include <mach/at572d940hf.h> #else #error "Unsupported AT91 processor" #endif +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ + #ifdef CONFIG_MMU /* * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF @@ -82,13 +86,6 @@ #define AT91_CHIPSELECT_6 0x70000000 #define AT91_CHIPSELECT_7 0x80000000 -/* SDRAM */ -#ifdef CONFIG_DRAM_BASE -#define AT91_SDRAM_BASE CONFIG_DRAM_BASE -#else -#define AT91_SDRAM_BASE AT91_CHIPSELECT_1 -#endif - /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h index c2cfe50..401c207 100644 --- a/arch/arm/mach-at91/include/mach/memory.h +++ b/arch/arm/mach-at91/include/mach/memory.h @@ -23,6 +23,4 @@ #include <mach/hardware.h> -#define PLAT_PHYS_OFFSET (AT91_SDRAM_BASE) - #endif diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/include/mach/stamp9g20.h index 6120f9c..f62c0ab 100644 --- a/arch/arm/mach-at91/include/mach/stamp9g20.h +++ b/arch/arm/mach-at91/include/mach/stamp9g20.h @@ -1,7 +1,7 @@ #ifndef __MACH_STAMP9G20_H #define __MACH_STAMP9G20_H -void stamp9g20_map_io(void); +void stamp9g20_init_early(void); void stamp9g20_board_init(void); #endif diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h new file mode 100644 index 0000000..b855ee7 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Under GPLv2 only + */ + +#ifndef __ARCH_SYSTEM_REV_H__ +#define __ARCH_SYSTEM_REV_H__ + +/* + * board revision encoding + * mach specific + * the 16-31 bit are reserved for at91 generic information + * + * bit 31: + * 0 => nand 16 bit + * 1 => nand 8 bit + */ +#define BOARD_HAVE_NAND_8BIT (1 << 31) +static int inline board_have_nand_8bit(void) +{ + return system_rev & BOARD_HAVE_NAND_8BIT; +} + +#endif /* __ARCH_SYSTEM_REV_H__ */ diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h index 05a6e8a..31ac2d9 100644 --- a/arch/arm/mach-at91/include/mach/timex.h +++ b/arch/arm/mach-at91/include/mach/timex.h @@ -82,11 +82,6 @@ #define AT91X40_MASTER_CLOCK 40000000 #define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK) -#elif defined(CONFIG_ARCH_AT572D940HF) - -#define AT572D940HF_MASTER_CLOCK 80000000 -#define CLOCK_TICK_RATE (AT572D940HF_MASTER_CLOCK/16) - #endif #endif diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index b95b919..133aac4 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1055,7 +1055,7 @@ int da850_register_pm(struct platform_device *pdev) if (!pdata->cpupll_reg_base) return -ENOMEM; - pdata->ddrpll_reg_base = ioremap(DA8XX_PLL1_BASE, SZ_4K); + pdata->ddrpll_reg_base = ioremap(DA850_PLL1_BASE, SZ_4K); if (!pdata->ddrpll_reg_base) { ret = -ENOMEM; goto no_ddrpll_mem; diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 58a02dc..4e66881 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -24,23 +24,25 @@ #include "clock.h" #define DA8XX_TPCC_BASE 0x01c00000 -#define DA850_MMCSD1_BASE 0x01e1b000 -#define DA850_TPCC1_BASE 0x01e30000 #define DA8XX_TPTC0_BASE 0x01c08000 #define DA8XX_TPTC1_BASE 0x01c08400 -#define DA850_TPTC2_BASE 0x01e38000 #define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */ #define DA8XX_I2C0_BASE 0x01c22000 -#define DA8XX_RTC_BASE 0x01C23000 +#define DA8XX_RTC_BASE 0x01c23000 +#define DA8XX_MMCSD0_BASE 0x01c40000 +#define DA8XX_SPI0_BASE 0x01c41000 +#define DA830_SPI1_BASE 0x01e12000 +#define DA8XX_LCD_CNTRL_BASE 0x01e13000 +#define DA850_MMCSD1_BASE 0x01e1b000 #define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000 #define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000 #define DA8XX_EMAC_CPGMAC_BASE 0x01e23000 #define DA8XX_EMAC_MDIO_BASE 0x01e24000 -#define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_I2C1_BASE 0x01e28000 -#define DA8XX_SPI0_BASE 0x01c41000 -#define DA830_SPI1_BASE 0x01e12000 +#define DA850_TPCC1_BASE 0x01e30000 +#define DA850_TPTC2_BASE 0x01e38000 #define DA850_SPI1_BASE 0x01f0e000 +#define DA8XX_DDR2_CTL_BASE 0xb0000000 #define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000 #define DA8XX_EMAC_MOD_REG_OFFSET 0x2000 diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 22ebc64..8f4f736 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -33,6 +33,9 @@ #define DM365_MMCSD0_BASE 0x01D11000 #define DM365_MMCSD1_BASE 0x01D00000 +/* System control register offsets */ +#define DM64XX_VDD3P3V_PWDN 0x48 + static struct resource i2c_resources[] = { { .start = DAVINCI_I2C_BASE, diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index e4fc1af..ad64da7 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -64,13 +64,9 @@ extern unsigned int da850_max_speed; #define DA8XX_TIMER64P1_BASE 0x01c21000 #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_PSC1_BASE 0x01e27000 -#define DA8XX_LCD_CNTRL_BASE 0x01e13000 -#define DA8XX_PLL1_BASE 0x01e1a000 -#define DA8XX_MMCSD0_BASE 0x01c40000 #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 #define DA8XX_AEMIF_CTL_BASE 0x68000000 -#define DA8XX_DDR2_CTL_BASE 0xb0000000 #define DA8XX_ARM_RAM_BASE 0xffff0000 void __init da830_init(void); diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index c45ba1f..414e0b9 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -21,9 +21,6 @@ */ #define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000 -/* System control register offsets */ -#define DM64XX_VDD3P3V_PWDN 0x48 - /* * I/O mapping */ diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 8051962..b92c1e5 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -169,9 +169,11 @@ config MACH_NURI select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 + select S3C_DEV_I2C3 select S3C_DEV_I2C5 select S5P_DEV_USB_EHCI select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI select SAMSUNG_DEV_PWM diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index 7778975..683fc38 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o gpiolib.o irq-eint.o dma.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-exynos4/cpuidle.c b/arch/arm/mach-exynos4/cpuidle.c new file mode 100644 index 0000000..bf7e96f --- /dev/null +++ b/arch/arm/mach-exynos4/cpuidle.c @@ -0,0 +1,86 @@ +/* linux/arch/arm/mach-exynos4/cpuidle.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/cpuidle.h> +#include <linux/io.h> + +#include <asm/proc-fns.h> + +static int exynos4_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state); + +static struct cpuidle_state exynos4_cpuidle_set[] = { + [0] = { + .enter = exynos4_enter_idle, + .exit_latency = 1, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "IDLE", + .desc = "ARM clock gating(WFI)", + }, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device); + +static struct cpuidle_driver exynos4_idle_driver = { + .name = "exynos4_idle", + .owner = THIS_MODULE, +}; + +static int exynos4_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + struct timeval before, after; + int idle_time; + + local_irq_disable(); + do_gettimeofday(&before); + + cpu_do_idle(); + + do_gettimeofday(&after); + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + + return idle_time; +} + +static int __init exynos4_init_cpuidle(void) +{ + int i, max_cpuidle_state, cpu_id; + struct cpuidle_device *device; + + cpuidle_register_driver(&exynos4_idle_driver); + + for_each_cpu(cpu_id, cpu_online_mask) { + device = &per_cpu(exynos4_cpuidle_device, cpu_id); + device->cpu = cpu_id; + + device->state_count = (sizeof(exynos4_cpuidle_set) / + sizeof(struct cpuidle_state)); + + max_cpuidle_state = device->state_count; + + for (i = 0; i < max_cpuidle_state; i++) { + memcpy(&device->states[i], &exynos4_cpuidle_set[i], + sizeof(struct cpuidle_state)); + } + + if (cpuidle_register_device(device)) { + printk(KERN_ERR "CPUidle register device failed\n,"); + return -EIO; + } + } + return 0; +} +device_initcall(exynos4_init_cpuidle); diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c index bb5d12f..642702b 100644 --- a/arch/arm/mach-exynos4/mach-nuri.c +++ b/arch/arm/mach-exynos4/mach-nuri.c @@ -12,6 +12,7 @@ #include <linux/serial_core.h> #include <linux/input.h> #include <linux/i2c.h> +#include <linux/i2c/atmel_mxt_ts.h> #include <linux/gpio_keys.h> #include <linux/gpio.h> #include <linux/regulator/machine.h> @@ -32,6 +33,8 @@ #include <plat/sdhci.h> #include <plat/ehci.h> #include <plat/clock.h> +#include <plat/gpio-cfg.h> +#include <plat/iic.h> #include <mach/map.h> @@ -259,6 +262,88 @@ static struct i2c_board_info i2c1_devs[] __initdata = { /* Gyro, To be updated */ }; +/* TSP */ +static u8 mxt_init_vals[] = { + /* MXT_GEN_COMMAND(6) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_GEN_POWER(7) */ + 0x20, 0xff, 0x32, + /* MXT_GEN_ACQUIRE(8) */ + 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23, + /* MXT_TOUCH_MULTI(9) */ + 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, + /* MXT_TOUCH_KEYARRAY(15) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, + 0x00, + /* MXT_SPT_GPIOPWM(19) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_PROCI_GRIPFACE(20) */ + 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04, + 0x0f, 0x0a, + /* MXT_PROCG_NOISE(22) */ + 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00, + 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03, + /* MXT_TOUCH_PROXIMITY(23) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_PROCI_ONETOUCH(24) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_SPT_SELFTEST(25) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + /* MXT_PROCI_TWOTOUCH(27) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_SPT_CTECONFIG(28) */ + 0x00, 0x00, 0x02, 0x08, 0x10, 0x00, +}; + +static struct mxt_platform_data mxt_platform_data = { + .config = mxt_init_vals, + .config_length = ARRAY_SIZE(mxt_init_vals), + + .x_line = 18, + .y_line = 11, + .x_size = 1024, + .y_size = 600, + .blen = 0x1, + .threshold = 0x28, + .voltage = 2800000, /* 2.8V */ + .orient = MXT_DIAGONAL_COUNTER, + .irqflags = IRQF_TRIGGER_FALLING, +}; + +static struct s3c2410_platform_i2c i2c3_data __initdata = { + .flags = 0, + .bus_num = 3, + .slave_addr = 0x10, + .frequency = 400 * 1000, + .sda_delay = 100, +}; + +static struct i2c_board_info i2c3_devs[] __initdata = { + { + I2C_BOARD_INFO("atmel_mxt_ts", 0x4a), + .platform_data = &mxt_platform_data, + .irq = IRQ_EINT(4), + }, +}; + +static void __init nuri_tsp_init(void) +{ + int gpio; + + /* TOUCH_INT: XEINT_4 */ + gpio = EXYNOS4_GPX0(4); + gpio_request(gpio, "TOUCH_INT"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); +} + /* GPIO I2C 5 (PMIC) */ static struct i2c_board_info i2c5_devs[] __initdata = { /* max8997, To be updated */ @@ -283,6 +368,7 @@ static struct platform_device *nuri_devices[] __initdata = { &s3c_device_wdt, &s3c_device_timer[0], &s5p_device_ehci, + &s3c_device_i2c3, /* NURI Devices */ &nuri_gpio_keys, @@ -300,8 +386,11 @@ static void __init nuri_map_io(void) static void __init nuri_machine_init(void) { nuri_sdhci_init(); + nuri_tsp_init(); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + s3c_i2c3_set_platdata(&i2c3_data); + i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); nuri_ehci_init(); diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index 5b84bcd..b991323 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -103,7 +103,6 @@ static struct amba_device fb_device = { .flags = IORESOURCE_MEM, }, .irq = { NETX_IRQ_LCD, NO_IRQ }, - .periphid = 0x10112400, }; int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel) diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 405e621..82db072 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -16,7 +16,6 @@ #include <mach/dma.h> #include <mach/map.h> -#include <mach/gpio-bank-c.h> #include <mach/spi-clocks.h> #include <mach/irqs.h> @@ -40,23 +39,15 @@ static char *spi_src_clks[] = { */ static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev) { + unsigned int base; + switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0); - s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO); - s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO); - s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP); + base = S3C64XX_GPC(0); break; case 1: - s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1); - s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1); - s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1); - s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP); + base = S3C64XX_GPC(4); break; default: @@ -64,6 +55,9 @@ static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev) return -EINVAL; } + s3c_gpio_cfgall_range(base, 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; } diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h deleted file mode 100644 index 34212e1..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h +++ /dev/null @@ -1,48 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank A register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPACON (S3C64XX_GPA_BASE + 0x00) -#define S3C64XX_GPADAT (S3C64XX_GPA_BASE + 0x04) -#define S3C64XX_GPAPUD (S3C64XX_GPA_BASE + 0x08) -#define S3C64XX_GPACONSLP (S3C64XX_GPA_BASE + 0x0c) -#define S3C64XX_GPAPUDSLP (S3C64XX_GPA_BASE + 0x10) - -#define S3C64XX_GPA_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPA_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPA_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPA0_UART_RXD0 (0x02 << 0) -#define S3C64XX_GPA0_EINT_G1_0 (0x07 << 0) - -#define S3C64XX_GPA1_UART_TXD0 (0x02 << 4) -#define S3C64XX_GPA1_EINT_G1_1 (0x07 << 4) - -#define S3C64XX_GPA2_UART_nCTS0 (0x02 << 8) -#define S3C64XX_GPA2_EINT_G1_2 (0x07 << 8) - -#define S3C64XX_GPA3_UART_nRTS0 (0x02 << 12) -#define S3C64XX_GPA3_EINT_G1_3 (0x07 << 12) - -#define S3C64XX_GPA4_UART_RXD1 (0x02 << 16) -#define S3C64XX_GPA4_EINT_G1_4 (0x07 << 16) - -#define S3C64XX_GPA5_UART_TXD1 (0x02 << 20) -#define S3C64XX_GPA5_EINT_G1_5 (0x07 << 20) - -#define S3C64XX_GPA6_UART_nCTS1 (0x02 << 24) -#define S3C64XX_GPA6_EINT_G1_6 (0x07 << 24) - -#define S3C64XX_GPA7_UART_nRTS1 (0x02 << 28) -#define S3C64XX_GPA7_EINT_G1_7 (0x07 << 28) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h deleted file mode 100644 index 7232c03..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h +++ /dev/null @@ -1,60 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank B register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPBCON (S3C64XX_GPB_BASE + 0x00) -#define S3C64XX_GPBDAT (S3C64XX_GPB_BASE + 0x04) -#define S3C64XX_GPBPUD (S3C64XX_GPB_BASE + 0x08) -#define S3C64XX_GPBCONSLP (S3C64XX_GPB_BASE + 0x0c) -#define S3C64XX_GPBPUDSLP (S3C64XX_GPB_BASE + 0x10) - -#define S3C64XX_GPB_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPB_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPB_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPB0_UART_RXD2 (0x02 << 0) -#define S3C64XX_GPB0_EXTDMA_REQ (0x03 << 0) -#define S3C64XX_GPB0_IrDA_RXD (0x04 << 0) -#define S3C64XX_GPB0_ADDR_CF0 (0x05 << 0) -#define S3C64XX_GPB0_EINT_G1_8 (0x07 << 0) - -#define S3C64XX_GPB1_UART_TXD2 (0x02 << 4) -#define S3C64XX_GPB1_EXTDMA_ACK (0x03 << 4) -#define S3C64XX_GPB1_IrDA_TXD (0x04 << 4) -#define S3C64XX_GPB1_ADDR_CF1 (0x05 << 4) -#define S3C64XX_GPB1_EINT_G1_9 (0x07 << 4) - -#define S3C64XX_GPB2_UART_RXD3 (0x02 << 8) -#define S3C64XX_GPB2_IrDA_RXD (0x03 << 8) -#define S3C64XX_GPB2_EXTDMA_REQ (0x04 << 8) -#define S3C64XX_GPB2_ADDR_CF2 (0x05 << 8) -#define S3C64XX_GPB2_I2C_SCL1 (0x06 << 8) -#define S3C64XX_GPB2_EINT_G1_10 (0x07 << 8) - -#define S3C64XX_GPB3_UART_TXD3 (0x02 << 12) -#define S3C64XX_GPB3_IrDA_TXD (0x03 << 12) -#define S3C64XX_GPB3_EXTDMA_ACK (0x04 << 12) -#define S3C64XX_GPB3_I2C_SDA1 (0x06 << 12) -#define S3C64XX_GPB3_EINT_G1_11 (0x07 << 12) - -#define S3C64XX_GPB4_IrDA_SDBW (0x02 << 16) -#define S3C64XX_GPB4_CAM_FIELD (0x03 << 16) -#define S3C64XX_GPB4_CF_DATA_DIR (0x04 << 16) -#define S3C64XX_GPB4_EINT_G1_12 (0x07 << 16) - -#define S3C64XX_GPB5_I2C_SCL0 (0x02 << 20) -#define S3C64XX_GPB5_EINT_G1_13 (0x07 << 20) - -#define S3C64XX_GPB6_I2C_SDA0 (0x02 << 24) -#define S3C64XX_GPB6_EINT_G1_14 (0x07 << 24) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h deleted file mode 100644 index db189ab..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h +++ /dev/null @@ -1,53 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank C register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPCCON (S3C64XX_GPC_BASE + 0x00) -#define S3C64XX_GPCDAT (S3C64XX_GPC_BASE + 0x04) -#define S3C64XX_GPCPUD (S3C64XX_GPC_BASE + 0x08) -#define S3C64XX_GPCCONSLP (S3C64XX_GPC_BASE + 0x0c) -#define S3C64XX_GPCPUDSLP (S3C64XX_GPC_BASE + 0x10) - -#define S3C64XX_GPC_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPC_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPC_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPC0_SPI_MISO0 (0x02 << 0) -#define S3C64XX_GPC0_EINT_G2_0 (0x07 << 0) - -#define S3C64XX_GPC1_SPI_CLKO (0x02 << 4) -#define S3C64XX_GPC1_EINT_G2_1 (0x07 << 4) - -#define S3C64XX_GPC2_SPI_MOSIO (0x02 << 8) -#define S3C64XX_GPC2_EINT_G2_2 (0x07 << 8) - -#define S3C64XX_GPC3_SPI_nCSO (0x02 << 12) -#define S3C64XX_GPC3_EINT_G2_3 (0x07 << 12) - -#define S3C64XX_GPC4_SPI_MISO1 (0x02 << 16) -#define S3C64XX_GPC4_MMC2_CMD (0x03 << 16) -#define S3C64XX_GPC4_I2S_V40_DO0 (0x05 << 16) -#define S3C64XX_GPC4_EINT_G2_4 (0x07 << 16) - -#define S3C64XX_GPC5_SPI_CLK1 (0x02 << 20) -#define S3C64XX_GPC5_MMC2_CLK (0x03 << 20) -#define S3C64XX_GPC5_I2S_V40_DO1 (0x05 << 20) -#define S3C64XX_GPC5_EINT_G2_5 (0x07 << 20) - -#define S3C64XX_GPC6_SPI_MOSI1 (0x02 << 24) -#define S3C64XX_GPC6_EINT_G2_6 (0x07 << 24) - -#define S3C64XX_GPC7_SPI_nCS1 (0x02 << 28) -#define S3C64XX_GPC7_I2S_V40_DO2 (0x05 << 28) -#define S3C64XX_GPC7_EINT_G2_7 (0x07 << 28) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h deleted file mode 100644 index 1a01cee..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h +++ /dev/null @@ -1,49 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank D register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPDCON (S3C64XX_GPD_BASE + 0x00) -#define S3C64XX_GPDDAT (S3C64XX_GPD_BASE + 0x04) -#define S3C64XX_GPDPUD (S3C64XX_GPD_BASE + 0x08) -#define S3C64XX_GPDCONSLP (S3C64XX_GPD_BASE + 0x0c) -#define S3C64XX_GPDPUDSLP (S3C64XX_GPD_BASE + 0x10) - -#define S3C64XX_GPD_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPD_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPD_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPD0_PCM0_SCLK (0x02 << 0) -#define S3C64XX_GPD0_I2S0_CLK (0x03 << 0) -#define S3C64XX_GPD0_AC97_BITCLK (0x04 << 0) -#define S3C64XX_GPD0_EINT_G3_0 (0x07 << 0) - -#define S3C64XX_GPD1_PCM0_EXTCLK (0x02 << 4) -#define S3C64XX_GPD1_I2S0_CDCLK (0x03 << 4) -#define S3C64XX_GPD1_AC97_nRESET (0x04 << 4) -#define S3C64XX_GPD1_EINT_G3_1 (0x07 << 4) - -#define S3C64XX_GPD2_PCM0_FSYNC (0x02 << 8) -#define S3C64XX_GPD2_I2S0_LRCLK (0x03 << 8) -#define S3C64XX_GPD2_AC97_SYNC (0x04 << 8) -#define S3C64XX_GPD2_EINT_G3_2 (0x07 << 8) - -#define S3C64XX_GPD3_PCM0_SIN (0x02 << 12) -#define S3C64XX_GPD3_I2S0_DI (0x03 << 12) -#define S3C64XX_GPD3_AC97_SDI (0x04 << 12) -#define S3C64XX_GPD3_EINT_G3_3 (0x07 << 12) - -#define S3C64XX_GPD4_PCM0_SOUT (0x02 << 16) -#define S3C64XX_GPD4_I2S0_D0 (0x03 << 16) -#define S3C64XX_GPD4_AC97_SDO (0x04 << 16) -#define S3C64XX_GPD4_EINT_G3_4 (0x07 << 16) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h deleted file mode 100644 index f057adb..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h +++ /dev/null @@ -1,44 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank E register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPECON (S3C64XX_GPE_BASE + 0x00) -#define S3C64XX_GPEDAT (S3C64XX_GPE_BASE + 0x04) -#define S3C64XX_GPEPUD (S3C64XX_GPE_BASE + 0x08) -#define S3C64XX_GPECONSLP (S3C64XX_GPE_BASE + 0x0c) -#define S3C64XX_GPEPUDSLP (S3C64XX_GPE_BASE + 0x10) - -#define S3C64XX_GPE_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPE_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPE_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPE0_PCM1_SCLK (0x02 << 0) -#define S3C64XX_GPE0_I2S1_CLK (0x03 << 0) -#define S3C64XX_GPE0_AC97_BITCLK (0x04 << 0) - -#define S3C64XX_GPE1_PCM1_EXTCLK (0x02 << 4) -#define S3C64XX_GPE1_I2S1_CDCLK (0x03 << 4) -#define S3C64XX_GPE1_AC97_nRESET (0x04 << 4) - -#define S3C64XX_GPE2_PCM1_FSYNC (0x02 << 8) -#define S3C64XX_GPE2_I2S1_LRCLK (0x03 << 8) -#define S3C64XX_GPE2_AC97_SYNC (0x04 << 8) - -#define S3C64XX_GPE3_PCM1_SIN (0x02 << 12) -#define S3C64XX_GPE3_I2S1_DI (0x03 << 12) -#define S3C64XX_GPE3_AC97_SDI (0x04 << 12) - -#define S3C64XX_GPE4_PCM1_SOUT (0x02 << 16) -#define S3C64XX_GPE4_I2S1_D0 (0x03 << 16) -#define S3C64XX_GPE4_AC97_SDO (0x04 << 16) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h deleted file mode 100644 index 62ab8f5..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h +++ /dev/null @@ -1,71 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank F register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPFCON (S3C64XX_GPF_BASE + 0x00) -#define S3C64XX_GPFDAT (S3C64XX_GPF_BASE + 0x04) -#define S3C64XX_GPFPUD (S3C64XX_GPF_BASE + 0x08) -#define S3C64XX_GPFCONSLP (S3C64XX_GPF_BASE + 0x0c) -#define S3C64XX_GPFPUDSLP (S3C64XX_GPF_BASE + 0x10) - -#define S3C64XX_GPF_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPF_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPF_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPF0_CAMIF_CLK (0x02 << 0) -#define S3C64XX_GPF0_EINT_G4_0 (0x03 << 0) - -#define S3C64XX_GPF1_CAMIF_HREF (0x02 << 2) -#define S3C64XX_GPF1_EINT_G4_1 (0x03 << 2) - -#define S3C64XX_GPF2_CAMIF_PCLK (0x02 << 4) -#define S3C64XX_GPF2_EINT_G4_2 (0x03 << 4) - -#define S3C64XX_GPF3_CAMIF_nRST (0x02 << 6) -#define S3C64XX_GPF3_EINT_G4_3 (0x03 << 6) - -#define S3C64XX_GPF4_CAMIF_VSYNC (0x02 << 8) -#define S3C64XX_GPF4_EINT_G4_4 (0x03 << 8) - -#define S3C64XX_GPF5_CAMIF_YDATA0 (0x02 << 10) -#define S3C64XX_GPF5_EINT_G4_5 (0x03 << 10) - -#define S3C64XX_GPF6_CAMIF_YDATA1 (0x02 << 12) -#define S3C64XX_GPF6_EINT_G4_6 (0x03 << 12) - -#define S3C64XX_GPF7_CAMIF_YDATA2 (0x02 << 14) -#define S3C64XX_GPF7_EINT_G4_7 (0x03 << 14) - -#define S3C64XX_GPF8_CAMIF_YDATA3 (0x02 << 16) -#define S3C64XX_GPF8_EINT_G4_8 (0x03 << 16) - -#define S3C64XX_GPF9_CAMIF_YDATA4 (0x02 << 18) -#define S3C64XX_GPF9_EINT_G4_9 (0x03 << 18) - -#define S3C64XX_GPF10_CAMIF_YDATA5 (0x02 << 20) -#define S3C64XX_GPF10_EINT_G4_10 (0x03 << 20) - -#define S3C64XX_GPF11_CAMIF_YDATA6 (0x02 << 22) -#define S3C64XX_GPF11_EINT_G4_11 (0x03 << 22) - -#define S3C64XX_GPF12_CAMIF_YDATA7 (0x02 << 24) -#define S3C64XX_GPF12_EINT_G4_12 (0x03 << 24) - -#define S3C64XX_GPF13_PWM_ECLK (0x02 << 26) -#define S3C64XX_GPF13_EINT_G4_13 (0x03 << 26) - -#define S3C64XX_GPF14_PWM_TOUT0 (0x02 << 28) -#define S3C64XX_GPF14_CLKOUT0 (0x03 << 28) - -#define S3C64XX_GPF15_PWM_TOUT1 (0x02 << 30) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h deleted file mode 100644 index b94954a..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank G register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPGCON (S3C64XX_GPG_BASE + 0x00) -#define S3C64XX_GPGDAT (S3C64XX_GPG_BASE + 0x04) -#define S3C64XX_GPGPUD (S3C64XX_GPG_BASE + 0x08) -#define S3C64XX_GPGCONSLP (S3C64XX_GPG_BASE + 0x0c) -#define S3C64XX_GPGPUDSLP (S3C64XX_GPG_BASE + 0x10) - -#define S3C64XX_GPG_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPG_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPG_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPG0_MMC0_CLK (0x02 << 0) -#define S3C64XX_GPG0_EINT_G5_0 (0x07 << 0) - -#define S3C64XX_GPG1_MMC0_CMD (0x02 << 4) -#define S3C64XX_GPG1_EINT_G5_1 (0x07 << 4) - -#define S3C64XX_GPG2_MMC0_DATA0 (0x02 << 8) -#define S3C64XX_GPG2_EINT_G5_2 (0x07 << 8) - -#define S3C64XX_GPG3_MMC0_DATA1 (0x02 << 12) -#define S3C64XX_GPG3_EINT_G5_3 (0x07 << 12) - -#define S3C64XX_GPG4_MMC0_DATA2 (0x02 << 16) -#define S3C64XX_GPG4_EINT_G5_4 (0x07 << 16) - -#define S3C64XX_GPG5_MMC0_DATA3 (0x02 << 20) -#define S3C64XX_GPG5_EINT_G5_5 (0x07 << 20) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h deleted file mode 100644 index 5d75aaa..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h +++ /dev/null @@ -1,74 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank H register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPHCON0 (S3C64XX_GPH_BASE + 0x00) -#define S3C64XX_GPHCON1 (S3C64XX_GPH_BASE + 0x04) -#define S3C64XX_GPHDAT (S3C64XX_GPH_BASE + 0x08) -#define S3C64XX_GPHPUD (S3C64XX_GPH_BASE + 0x0c) -#define S3C64XX_GPHCONSLP (S3C64XX_GPH_BASE + 0x10) -#define S3C64XX_GPHPUDSLP (S3C64XX_GPH_BASE + 0x14) - -#define S3C64XX_GPH_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPH_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPH_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPH0_MMC1_CLK (0x02 << 0) -#define S3C64XX_GPH0_KP_COL0 (0x04 << 0) -#define S3C64XX_GPH0_EINT_G6_0 (0x07 << 0) - -#define S3C64XX_GPH1_MMC1_CMD (0x02 << 4) -#define S3C64XX_GPH1_KP_COL1 (0x04 << 4) -#define S3C64XX_GPH1_EINT_G6_1 (0x07 << 4) - -#define S3C64XX_GPH2_MMC1_DATA0 (0x02 << 8) -#define S3C64XX_GPH2_KP_COL2 (0x04 << 8) -#define S3C64XX_GPH2_EINT_G6_2 (0x07 << 8) - -#define S3C64XX_GPH3_MMC1_DATA1 (0x02 << 12) -#define S3C64XX_GPH3_KP_COL3 (0x04 << 12) -#define S3C64XX_GPH3_EINT_G6_3 (0x07 << 12) - -#define S3C64XX_GPH4_MMC1_DATA2 (0x02 << 16) -#define S3C64XX_GPH4_KP_COL4 (0x04 << 16) -#define S3C64XX_GPH4_EINT_G6_4 (0x07 << 16) - -#define S3C64XX_GPH5_MMC1_DATA3 (0x02 << 20) -#define S3C64XX_GPH5_KP_COL5 (0x04 << 20) -#define S3C64XX_GPH5_EINT_G6_5 (0x07 << 20) - -#define S3C64XX_GPH6_MMC1_DATA4 (0x02 << 24) -#define S3C64XX_GPH6_MMC2_DATA0 (0x03 << 24) -#define S3C64XX_GPH6_KP_COL6 (0x04 << 24) -#define S3C64XX_GPH6_I2S_V40_BCLK (0x05 << 24) -#define S3C64XX_GPH6_ADDR_CF0 (0x06 << 24) -#define S3C64XX_GPH6_EINT_G6_6 (0x07 << 24) - -#define S3C64XX_GPH7_MMC1_DATA5 (0x02 << 28) -#define S3C64XX_GPH7_MMC2_DATA1 (0x03 << 28) -#define S3C64XX_GPH7_KP_COL7 (0x04 << 28) -#define S3C64XX_GPH7_I2S_V40_CDCLK (0x05 << 28) -#define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28) -#define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28) - -#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0) -#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0) -#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0) -#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0) -#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0) - -#define S3C64XX_GPH9_OUTPUT (0x01 << 4) -#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4) -#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4) -#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4) -#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h deleted file mode 100644 index 4ceaa60..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank I register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPICON (S3C64XX_GPI_BASE + 0x00) -#define S3C64XX_GPIDAT (S3C64XX_GPI_BASE + 0x04) -#define S3C64XX_GPIPUD (S3C64XX_GPI_BASE + 0x08) -#define S3C64XX_GPICONSLP (S3C64XX_GPI_BASE + 0x0c) -#define S3C64XX_GPIPUDSLP (S3C64XX_GPI_BASE + 0x10) - -#define S3C64XX_GPI_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPI_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPI_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPI0_VD0 (0x02 << 0) -#define S3C64XX_GPI1_VD1 (0x02 << 2) -#define S3C64XX_GPI2_VD2 (0x02 << 4) -#define S3C64XX_GPI3_VD3 (0x02 << 6) -#define S3C64XX_GPI4_VD4 (0x02 << 8) -#define S3C64XX_GPI5_VD5 (0x02 << 10) -#define S3C64XX_GPI6_VD6 (0x02 << 12) -#define S3C64XX_GPI7_VD7 (0x02 << 14) -#define S3C64XX_GPI8_VD8 (0x02 << 16) -#define S3C64XX_GPI9_VD9 (0x02 << 18) -#define S3C64XX_GPI10_VD10 (0x02 << 20) -#define S3C64XX_GPI11_VD11 (0x02 << 22) -#define S3C64XX_GPI12_VD12 (0x02 << 24) -#define S3C64XX_GPI13_VD13 (0x02 << 26) -#define S3C64XX_GPI14_VD14 (0x02 << 28) -#define S3C64XX_GPI15_VD15 (0x02 << 30) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h deleted file mode 100644 index 6f25cd0..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank J register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPJCON (S3C64XX_GPJ_BASE + 0x00) -#define S3C64XX_GPJDAT (S3C64XX_GPJ_BASE + 0x04) -#define S3C64XX_GPJPUD (S3C64XX_GPJ_BASE + 0x08) -#define S3C64XX_GPJCONSLP (S3C64XX_GPJ_BASE + 0x0c) -#define S3C64XX_GPJPUDSLP (S3C64XX_GPJ_BASE + 0x10) - -#define S3C64XX_GPJ_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPJ_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPJ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPJ0_VD16 (0x02 << 0) -#define S3C64XX_GPJ1_VD17 (0x02 << 2) -#define S3C64XX_GPJ2_VD18 (0x02 << 4) -#define S3C64XX_GPJ3_VD19 (0x02 << 6) -#define S3C64XX_GPJ4_VD20 (0x02 << 8) -#define S3C64XX_GPJ5_VD21 (0x02 << 10) -#define S3C64XX_GPJ6_VD22 (0x02 << 12) -#define S3C64XX_GPJ7_VD23 (0x02 << 14) -#define S3C64XX_GPJ8_LCD_HSYNC (0x02 << 16) -#define S3C64XX_GPJ9_LCD_VSYNC (0x02 << 18) -#define S3C64XX_GPJ10_LCD_VDEN (0x02 << 20) -#define S3C64XX_GPJ11_LCD_VCLK (0x02 << 22) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h deleted file mode 100644 index d0aeda1..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h +++ /dev/null @@ -1,54 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank N register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00) -#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04) -#define S3C64XX_GPNPUD (S3C64XX_GPN_BASE + 0x08) - -#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPN_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPN0_EINT0 (0x02 << 0) -#define S3C64XX_GPN0_KP_ROW0 (0x03 << 0) - -#define S3C64XX_GPN1_EINT1 (0x02 << 2) -#define S3C64XX_GPN1_KP_ROW1 (0x03 << 2) - -#define S3C64XX_GPN2_EINT2 (0x02 << 4) -#define S3C64XX_GPN2_KP_ROW2 (0x03 << 4) - -#define S3C64XX_GPN3_EINT3 (0x02 << 6) -#define S3C64XX_GPN3_KP_ROW3 (0x03 << 6) - -#define S3C64XX_GPN4_EINT4 (0x02 << 8) -#define S3C64XX_GPN4_KP_ROW4 (0x03 << 8) - -#define S3C64XX_GPN5_EINT5 (0x02 << 10) -#define S3C64XX_GPN5_KP_ROW5 (0x03 << 10) - -#define S3C64XX_GPN6_EINT6 (0x02 << 12) -#define S3C64XX_GPN6_KP_ROW6 (0x03 << 12) - -#define S3C64XX_GPN7_EINT7 (0x02 << 14) -#define S3C64XX_GPN7_KP_ROW7 (0x03 << 14) - -#define S3C64XX_GPN8_EINT8 (0x02 << 16) -#define S3C64XX_GPN9_EINT9 (0x02 << 18) -#define S3C64XX_GPN10_EINT10 (0x02 << 20) -#define S3C64XX_GPN11_EINT11 (0x02 << 22) -#define S3C64XX_GPN12_EINT12 (0x02 << 24) -#define S3C64XX_GPN13_EINT13 (0x02 << 26) -#define S3C64XX_GPN14_EINT14 (0x02 << 28) -#define S3C64XX_GPN15_EINT15 (0x02 << 30) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h deleted file mode 100644 index 21868fa..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank O register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPOCON (S3C64XX_GPO_BASE + 0x00) -#define S3C64XX_GPODAT (S3C64XX_GPO_BASE + 0x04) -#define S3C64XX_GPOPUD (S3C64XX_GPO_BASE + 0x08) -#define S3C64XX_GPOCONSLP (S3C64XX_GPO_BASE + 0x0c) -#define S3C64XX_GPOPUDSLP (S3C64XX_GPO_BASE + 0x10) - -#define S3C64XX_GPO_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPO_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPO_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPO0_MEM0_nCS2 (0x02 << 0) -#define S3C64XX_GPO0_EINT_G7_0 (0x03 << 0) - -#define S3C64XX_GPO1_MEM0_nCS3 (0x02 << 2) -#define S3C64XX_GPO1_EINT_G7_1 (0x03 << 2) - -#define S3C64XX_GPO2_MEM0_nCS4 (0x02 << 4) -#define S3C64XX_GPO2_EINT_G7_2 (0x03 << 4) - -#define S3C64XX_GPO3_MEM0_nCS5 (0x02 << 6) -#define S3C64XX_GPO3_EINT_G7_3 (0x03 << 6) - -#define S3C64XX_GPO4_EINT_G7_4 (0x03 << 8) - -#define S3C64XX_GPO5_EINT_G7_5 (0x03 << 10) - -#define S3C64XX_GPO6_MEM0_ADDR6 (0x02 << 12) -#define S3C64XX_GPO6_EINT_G7_6 (0x03 << 12) - -#define S3C64XX_GPO7_MEM0_ADDR7 (0x02 << 14) -#define S3C64XX_GPO7_EINT_G7_7 (0x03 << 14) - -#define S3C64XX_GPO8_MEM0_ADDR8 (0x02 << 16) -#define S3C64XX_GPO8_EINT_G7_8 (0x03 << 16) - -#define S3C64XX_GPO9_MEM0_ADDR9 (0x02 << 18) -#define S3C64XX_GPO9_EINT_G7_9 (0x03 << 18) - -#define S3C64XX_GPO10_MEM0_ADDR10 (0x02 << 20) -#define S3C64XX_GPO10_EINT_G7_10 (0x03 << 20) - -#define S3C64XX_GPO11_MEM0_ADDR11 (0x02 << 22) -#define S3C64XX_GPO11_EINT_G7_11 (0x03 << 22) - -#define S3C64XX_GPO12_MEM0_ADDR12 (0x02 << 24) -#define S3C64XX_GPO12_EINT_G7_12 (0x03 << 24) - -#define S3C64XX_GPO13_MEM0_ADDR13 (0x02 << 26) -#define S3C64XX_GPO13_EINT_G7_13 (0x03 << 26) - -#define S3C64XX_GPO14_MEM0_ADDR14 (0x02 << 28) -#define S3C64XX_GPO14_EINT_G7_14 (0x03 << 28) - -#define S3C64XX_GPO15_MEM0_ADDR15 (0x02 << 30) -#define S3C64XX_GPO15_EINT_G7_15 (0x03 << 30) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h deleted file mode 100644 index 46bcfb6..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h +++ /dev/null @@ -1,69 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank P register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPPCON (S3C64XX_GPP_BASE + 0x00) -#define S3C64XX_GPPDAT (S3C64XX_GPP_BASE + 0x04) -#define S3C64XX_GPPPUD (S3C64XX_GPP_BASE + 0x08) -#define S3C64XX_GPPCONSLP (S3C64XX_GPP_BASE + 0x0c) -#define S3C64XX_GPPPUDSLP (S3C64XX_GPP_BASE + 0x10) - -#define S3C64XX_GPP_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPP_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPP_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPP0_MEM0_ADDRV (0x02 << 0) -#define S3C64XX_GPP0_EINT_G8_0 (0x03 << 0) - -#define S3C64XX_GPP1_MEM0_SMCLK (0x02 << 2) -#define S3C64XX_GPP1_EINT_G8_1 (0x03 << 2) - -#define S3C64XX_GPP2_MEM0_nWAIT (0x02 << 4) -#define S3C64XX_GPP2_EINT_G8_2 (0x03 << 4) - -#define S3C64XX_GPP3_MEM0_RDY0_ALE (0x02 << 6) -#define S3C64XX_GPP3_EINT_G8_3 (0x03 << 6) - -#define S3C64XX_GPP4_MEM0_RDY1_CLE (0x02 << 8) -#define S3C64XX_GPP4_EINT_G8_4 (0x03 << 8) - -#define S3C64XX_GPP5_MEM0_INTsm0_FWE (0x02 << 10) -#define S3C64XX_GPP5_EINT_G8_5 (0x03 << 10) - -#define S3C64XX_GPP6_MEM0_(null) (0x02 << 12) -#define S3C64XX_GPP6_EINT_G8_6 (0x03 << 12) - -#define S3C64XX_GPP7_MEM0_INTsm1_FRE (0x02 << 14) -#define S3C64XX_GPP7_EINT_G8_7 (0x03 << 14) - -#define S3C64XX_GPP8_MEM0_RPn_RnB (0x02 << 16) -#define S3C64XX_GPP8_EINT_G8_8 (0x03 << 16) - -#define S3C64XX_GPP9_MEM0_ATA_RESET (0x02 << 18) -#define S3C64XX_GPP9_EINT_G8_9 (0x03 << 18) - -#define S3C64XX_GPP10_MEM0_ATA_INPACK (0x02 << 20) -#define S3C64XX_GPP10_EINT_G8_10 (0x03 << 20) - -#define S3C64XX_GPP11_MEM0_ATA_REG (0x02 << 22) -#define S3C64XX_GPP11_EINT_G8_11 (0x03 << 22) - -#define S3C64XX_GPP12_MEM0_ATA_WE (0x02 << 24) -#define S3C64XX_GPP12_EINT_G8_12 (0x03 << 24) - -#define S3C64XX_GPP13_MEM0_ATA_OE (0x02 << 26) -#define S3C64XX_GPP13_EINT_G8_13 (0x03 << 26) - -#define S3C64XX_GPP14_MEM0_ATA_CD (0x02 << 28) -#define S3C64XX_GPP14_EINT_G8_14 (0x03 << 28) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h deleted file mode 100644 index 1712223..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h +++ /dev/null @@ -1,46 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank Q register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPQCON (S3C64XX_GPQ_BASE + 0x00) -#define S3C64XX_GPQDAT (S3C64XX_GPQ_BASE + 0x04) -#define S3C64XX_GPQPUD (S3C64XX_GPQ_BASE + 0x08) -#define S3C64XX_GPQCONSLP (S3C64XX_GPQ_BASE + 0x0c) -#define S3C64XX_GPQPUDSLP (S3C64XX_GPQ_BASE + 0x10) - -#define S3C64XX_GPQ_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPQ_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPQ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPQ0_MEM0_ADDR18_RAS (0x02 << 0) -#define S3C64XX_GPQ0_EINT_G9_0 (0x03 << 0) - -#define S3C64XX_GPQ1_MEM0_ADDR19_CAS (0x02 << 2) -#define S3C64XX_GPQ1_EINT_G9_1 (0x03 << 2) - -#define S3C64XX_GPQ2_EINT_G9_2 (0x03 << 4) - -#define S3C64XX_GPQ3_EINT_G9_3 (0x03 << 6) - -#define S3C64XX_GPQ4_EINT_G9_4 (0x03 << 8) - -#define S3C64XX_GPQ5_EINT_G9_5 (0x03 << 10) - -#define S3C64XX_GPQ6_EINT_G9_6 (0x03 << 12) - -#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC (0x02 << 14) -#define S3C64XX_GPQ7_EINT_G9_7 (0x03 << 14) - -#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC (0x02 << 16) -#define S3C64XX_GPQ8_EINT_G9_8 (0x03 << 16) - diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 686a4f2..2c0353a 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -50,7 +50,6 @@ #include <mach/hardware.h> #include <mach/regs-fb.h> #include <mach/map.h> -#include <mach/gpio-bank-f.h> #include <asm/irq.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 79412f7..bc1c470 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -30,26 +30,18 @@ #include <mach/regs-gpio-memport.h> #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK -#include <mach/gpio-bank-n.h> - void s3c_pm_debug_smdkled(u32 set, u32 clear) { unsigned long flags; - u32 reg; + int i; local_irq_save(flags); - reg = __raw_readl(S3C64XX_GPNCON); - reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | - S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15)); - reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | - S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15); - __raw_writel(reg, S3C64XX_GPNCON); - - reg = __raw_readl(S3C64XX_GPNDAT); - reg &= ~(clear << 12); - reg |= set << 12; - __raw_writel(reg, S3C64XX_GPNDAT); - + for (i = 0; i < 4; i++) { + if (clear & (1 << i)) + gpio_set_value(S3C64XX_GPN(12 + i), 0); + if (set & (1 << i)) + gpio_set_value(S3C64XX_GPN(12 + i), 1); + } local_irq_restore(flags); } #endif @@ -187,6 +179,18 @@ static int s3c64xx_pm_init(void) pm_cpu_prep = s3c64xx_pm_prepare; pm_cpu_sleep = s3c64xx_cpu_suspend; pm_uart_udivslot = 1; + +#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK + gpio_request(S3C64XX_GPN(12), "DEBUG_LED0"); + gpio_request(S3C64XX_GPN(13), "DEBUG_LED1"); + gpio_request(S3C64XX_GPN(14), "DEBUG_LED2"); + gpio_request(S3C64XX_GPN(15), "DEBUG_LED3"); + gpio_direction_output(S3C64XX_GPN(12), 0); + gpio_direction_output(S3C64XX_GPN(13), 0); + gpio_direction_output(S3C64XX_GPN(14), 0); + gpio_direction_output(S3C64XX_GPN(15), 0); +#endif + return 0; } diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c index 406192a..241af94 100644 --- a/arch/arm/mach-s3c64xx/setup-i2c0.c +++ b/arch/arm/mach-s3c64xx/setup-i2c0.c @@ -18,14 +18,11 @@ struct platform_device; /* don't need the contents */ -#include <mach/gpio-bank-b.h> #include <plat/iic.h> #include <plat/gpio-cfg.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0); - s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0); - s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S3C64XX_GPB(5), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c index 1ee62c9..3d13a96 100644 --- a/arch/arm/mach-s3c64xx/setup-i2c1.c +++ b/arch/arm/mach-s3c64xx/setup-i2c1.c @@ -18,14 +18,11 @@ struct platform_device; /* don't need the contents */ -#include <mach/gpio-bank-b.h> #include <plat/iic.h> #include <plat/gpio-cfg.h> void s3c_i2c1_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1); - s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1); - s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S3C64XX_GPB(2), 2, + S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S index afe5a76..1f87732 100644 --- a/arch/arm/mach-s3c64xx/sleep.S +++ b/arch/arm/mach-s3c64xx/sleep.S @@ -20,7 +20,6 @@ #define S3C64XX_VA_GPIO (0x0) #include <mach/regs-gpio.h> -#include <mach/gpio-bank-n.h> #define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT)) @@ -68,6 +67,13 @@ ENTRY(s3c_cpu_resume) ldr r2, =LL_UART /* for debug */ #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK + +#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00) +#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04) + +#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + /* Initialise the GPIO state if we are debugging via the SMDK LEDs, * as the uboot version supplied resets these to inputs during the * resume checks. diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig deleted file mode 100644 index 33569e4..0000000 --- a/arch/arm/mach-s5p6442/Kconfig +++ /dev/null @@ -1,25 +0,0 @@ -# arch/arm/mach-s5p6442/Kconfig -# -# Copyright (c) 2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -# Configuration options for the S5P6442 - -if ARCH_S5P6442 - -config CPU_S5P6442 - bool - select S3C_PL330_DMA - help - Enable S5P6442 CPU support - -config MACH_SMDK6442 - bool "SMDK6442" - select CPU_S5P6442 - select S3C_DEV_WDT - help - Machine support for Samsung SMDK6442 - -endif diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile deleted file mode 100644 index 90a3d83..0000000 --- a/arch/arm/mach-s5p6442/Makefile +++ /dev/null @@ -1,24 +0,0 @@ -# arch/arm/mach-s5p6442/Makefile -# -# Copyright (c) 2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core support for S5P6442 system - -obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o dma.o -obj-$(CONFIG_CPU_S5P6442) += setup-i2c0.o - -# machine support - -obj-$(CONFIG_MACH_SMDK6442) += mach-smdk6442.o - -# device support -obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o diff --git a/arch/arm/mach-s5p6442/Makefile.boot b/arch/arm/mach-s5p6442/Makefile.boot deleted file mode 100644 index ff90aa1..0000000 --- a/arch/arm/mach-s5p6442/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y := 0x20008000 -params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c deleted file mode 100644 index fbbc7be..0000000 --- a/arch/arm/mach-s5p6442/clock.c +++ /dev/null @@ -1,420 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/clock.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/map.h> - -#include <plat/cpu-freq.h> -#include <mach/regs-clock.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> -#include <plat/s5p6442.h> - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - .id = -1, - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 }, -}; - -/* Possible clock sources for ARM Mux */ -static struct clk *clk_src_arm_list[] = { - [1] = &clk_mout_apll.clk, - [2] = &clk_mout_mpll.clk, -}; - -static struct clksrc_sources clk_src_arm = { - .sources = clk_src_arm_list, - .nr_sources = ARRAY_SIZE(clk_src_arm_list), -}; - -static struct clksrc_clk clk_mout_arm = { - .clk = { - .name = "mout_arm", - .id = -1, - }, - .sources = &clk_src_arm, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 }, -}; - -static struct clk clk_dout_a2m = { - .name = "dout_a2m", - .id = -1, - .parent = &clk_mout_apll.clk, -}; - -/* Possible clock sources for D0 Mux */ -static struct clk *clk_src_d0_list[] = { - [1] = &clk_mout_mpll.clk, - [2] = &clk_dout_a2m, -}; - -static struct clksrc_sources clk_src_d0 = { - .sources = clk_src_d0_list, - .nr_sources = ARRAY_SIZE(clk_src_d0_list), -}; - -static struct clksrc_clk clk_mout_d0 = { - .clk = { - .name = "mout_d0", - .id = -1, - }, - .sources = &clk_src_d0, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 20, .size = 3 }, -}; - -static struct clk clk_dout_apll = { - .name = "dout_apll", - .id = -1, - .parent = &clk_mout_arm.clk, -}; - -/* Possible clock sources for D0SYNC Mux */ -static struct clk *clk_src_d0sync_list[] = { - [1] = &clk_mout_d0.clk, - [2] = &clk_dout_apll, -}; - -static struct clksrc_sources clk_src_d0sync = { - .sources = clk_src_d0sync_list, - .nr_sources = ARRAY_SIZE(clk_src_d0sync_list), -}; - -static struct clksrc_clk clk_mout_d0sync = { - .clk = { - .name = "mout_d0sync", - .id = -1, - }, - .sources = &clk_src_d0sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, -}; - -/* Possible clock sources for D1 Mux */ -static struct clk *clk_src_d1_list[] = { - [1] = &clk_mout_mpll.clk, - [2] = &clk_dout_a2m, -}; - -static struct clksrc_sources clk_src_d1 = { - .sources = clk_src_d1_list, - .nr_sources = ARRAY_SIZE(clk_src_d1_list), -}; - -static struct clksrc_clk clk_mout_d1 = { - .clk = { - .name = "mout_d1", - .id = -1, - }, - .sources = &clk_src_d1, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 24, .size = 3 }, -}; - -/* Possible clock sources for D1SYNC Mux */ -static struct clk *clk_src_d1sync_list[] = { - [1] = &clk_mout_d1.clk, - [2] = &clk_dout_apll, -}; - -static struct clksrc_sources clk_src_d1sync = { - .sources = clk_src_d1sync_list, - .nr_sources = ARRAY_SIZE(clk_src_d1sync_list), -}; - -static struct clksrc_clk clk_mout_d1sync = { - .clk = { - .name = "mout_d1sync", - .id = -1, - }, - .sources = &clk_src_d1sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, -}; - -static struct clk clk_hclkd0 = { - .name = "hclkd0", - .id = -1, - .parent = &clk_mout_d0sync.clk, -}; - -static struct clk clk_hclkd1 = { - .name = "hclkd1", - .id = -1, - .parent = &clk_mout_d1sync.clk, -}; - -static struct clk clk_pclkd0 = { - .name = "pclkd0", - .id = -1, - .parent = &clk_hclkd0, -}; - -static struct clk clk_pclkd1 = { - .name = "pclkd1", - .id = -1, - .parent = &clk_hclkd1, -}; - -int s5p6442_clk_ip0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable); -} - -int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable); -} - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "dout_a2m", - .id = -1, - .parent = &clk_mout_apll.clk, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 }, - }, { - .clk = { - .name = "dout_apll", - .id = -1, - .parent = &clk_mout_arm.clk, - }, - .sources = &clk_src_arm, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 }, - }, { - .clk = { - .name = "hclkd1", - .id = -1, - .parent = &clk_mout_d1sync.clk, - }, - .sources = &clk_src_d1sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "hclkd0", - .id = -1, - .parent = &clk_mout_d0sync.clk, - }, - .sources = &clk_src_d0sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "pclkd0", - .id = -1, - .parent = &clk_hclkd0, - }, - .sources = &clk_src_d0sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 }, - }, { - .clk = { - .name = "pclkd1", - .id = -1, - .parent = &clk_hclkd1, - }, - .sources = &clk_src_d1sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 }, - } -}; - -/* Clock initialisation code */ -static struct clksrc_clk *init_parents[] = { - &clk_mout_apll, - &clk_mout_mpll, - &clk_mout_epll, - &clk_mout_arm, - &clk_mout_d0, - &clk_mout_d0sync, - &clk_mout_d1, - &clk_mout_d1sync, -}; - -void __init_or_cpufreq s5p6442_setup_clocks(void) -{ - struct clk *pclkd0_clk; - struct clk *pclkd1_clk; - - unsigned long xtal; - unsigned long arm; - unsigned long hclkd0 = 0; - unsigned long hclkd1 = 0; - unsigned long pclkd0 = 0; - unsigned long pclkd1 = 0; - - unsigned long apll; - unsigned long mpll; - unsigned long epll; - unsigned int ptr; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - xtal = clk_get_rate(&clk_xtal); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); - epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500); - - printk(KERN_INFO "S5P6442: PLL settings, A=%ld, M=%ld, E=%ld", - apll, mpll, epll); - - clk_fout_apll.rate = apll; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - - for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s3c_set_clksrc(init_parents[ptr], true); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); - - arm = clk_get_rate(&clk_dout_apll); - hclkd0 = clk_get_rate(&clk_hclkd0); - hclkd1 = clk_get_rate(&clk_hclkd1); - - pclkd0_clk = clk_get(NULL, "pclkd0"); - BUG_ON(IS_ERR(pclkd0_clk)); - - pclkd0 = clk_get_rate(pclkd0_clk); - clk_put(pclkd0_clk); - - pclkd1_clk = clk_get(NULL, "pclkd1"); - BUG_ON(IS_ERR(pclkd1_clk)); - - pclkd1 = clk_get_rate(pclkd1_clk); - clk_put(pclkd1_clk); - - printk(KERN_INFO "S5P6442: HCLKD0=%ld, HCLKD1=%ld, PCLKD0=%ld, PCLKD1=%ld\n", - hclkd0, hclkd1, pclkd0, pclkd1); - - /* For backward compatibility */ - clk_f.rate = arm; - clk_h.rate = hclkd1; - clk_p.rate = pclkd1; - - clk_pclkd0.rate = pclkd0; - clk_pclkd1.rate = pclkd1; -} - -static struct clk init_clocks_off[] = { - { - .name = "pdma", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip0_ctrl, - .ctrlbit = (1 << 3), - }, -}; - -static struct clk init_clocks[] = { - { - .name = "systimer", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<16), - }, { - .name = "uart", - .id = 0, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<17), - }, { - .name = "uart", - .id = 1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<18), - }, { - .name = "uart", - .id = 2, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<19), - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1 << 22), - }, { - .name = "timers", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<23), - }, -}; - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_epll, - &clk_mout_apll.clk, - &clk_mout_mpll.clk, - &clk_mout_epll.clk, - &clk_mout_d0.clk, - &clk_mout_d0sync.clk, - &clk_mout_d1.clk, - &clk_mout_d1sync.clk, - &clk_hclkd0, - &clk_pclkd0, - &clk_hclkd1, - &clk_pclkd1, -}; - -void __init s5p6442_register_clocks(void) -{ - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c deleted file mode 100644 index 842af86..0000000 --- a/arch/arm/mach-s5p6442/cpu.c +++ /dev/null @@ -1,143 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/cpu.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/sysdev.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/sched.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/proc-fns.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <asm/irq.h> - -#include <plat/regs-serial.h> -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/clock.h> -#include <plat/s5p6442.h> - -/* Initial IO mappings */ - -static struct map_desc s5p6442_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSTIMER, - .pfn = __phys_to_pfn(S5P6442_PA_SYSTIMER), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5P6442_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5P6442_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5P6442_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC2, - .pfn = __phys_to_pfn(S5P6442_PA_VIC2), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, - } -}; - -static void s5p6442_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - -/* - * s5p6442_map_io - * - * register the standard cpu IO areas - */ - -void __init s5p6442_map_io(void) -{ - iotable_init(s5p6442_iodesc, ARRAY_SIZE(s5p6442_iodesc)); -} - -void __init s5p6442_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5p6442_register_clocks(); - s5p6442_setup_clocks(); -} - -void __init s5p6442_init_irq(void) -{ - /* S5P6442 supports 3 VIC */ - u32 vic[3]; - - /* VIC0, VIC1, and VIC2: some interrupt reserved */ - vic[0] = 0x7fefffff; - vic[1] = 0X7f389c81; - vic[2] = 0X1bbbcfff; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} - -struct sysdev_class s5p6442_sysclass = { - .name = "s5p6442-core", -}; - -static struct sys_device s5p6442_sysdev = { - .cls = &s5p6442_sysclass, -}; - -static int __init s5p6442_core_init(void) -{ - return sysdev_class_register(&s5p6442_sysclass); -} - -core_initcall(s5p6442_core_init); - -int __init s5p6442_init(void) -{ - printk(KERN_INFO "S5P6442: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5p6442_idle; - - return sysdev_register(&s5p6442_sysdev); -} diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c deleted file mode 100644 index 8719dc4..0000000 --- a/arch/arm/mach-s5p6442/dev-audio.c +++ /dev/null @@ -1,217 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/dev-audio.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <plat/gpio-cfg.h> -#include <plat/audio.h> - -#include <mach/map.h> -#include <mach/dma.h> -#include <mach/irqs.h> - -static int s5p6442_cfg_i2s(struct platform_device *pdev) -{ - unsigned int base; - - /* configure GPIO for i2s port */ - switch (pdev->id) { - case 1: - base = S5P6442_GPC1(0); - break; - - case 0: - base = S5P6442_GPC0(0); - break; - - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2)); - return 0; -} - -static const char *rclksrc_v35[] = { - [0] = "busclk", - [1] = "i2sclk", -}; - -static struct s3c_audio_pdata i2sv35_pdata = { - .cfg_gpio = s5p6442_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR, - .src_clk = rclksrc_v35, - }, - }, -}; - -static struct resource s5p6442_iis0_resource[] = { - [0] = { - .start = S5P6442_PA_I2S0, - .end = S5P6442_PA_I2S0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S0_TX, - .end = DMACH_I2S0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S0_RX, - .end = DMACH_I2S0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DMACH_I2S0S_TX, - .end = DMACH_I2S0S_TX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_iis0 = { - .name = "samsung-i2s", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6442_iis0_resource), - .resource = s5p6442_iis0_resource, - .dev = { - .platform_data = &i2sv35_pdata, - }, -}; - -static const char *rclksrc_v3[] = { - [0] = "iis", - [1] = "sclk_audio", -}; - -static struct s3c_audio_pdata i2sv3_pdata = { - .cfg_gpio = s5p6442_cfg_i2s, - .type = { - .i2s = { - .src_clk = rclksrc_v3, - }, - }, -}; - -static struct resource s5p6442_iis1_resource[] = { - [0] = { - .start = S5P6442_PA_I2S1, - .end = S5P6442_PA_I2S1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S1_TX, - .end = DMACH_I2S1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S1_RX, - .end = DMACH_I2S1_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_iis1 = { - .name = "samsung-i2s", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6442_iis1_resource), - .resource = s5p6442_iis1_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev) -{ - unsigned int base; - - switch (pdev->id) { - case 0: - base = S5P6442_GPC0(0); - break; - - case 1: - base = S5P6442_GPC1(0); - break; - - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3)); - return 0; -} - -static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = s5p6442_pcm_cfg_gpio, -}; - -static struct resource s5p6442_pcm0_resource[] = { - [0] = { - .start = S5P6442_PA_PCM0, - .end = S5P6442_PA_PCM0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_pcm0 = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6442_pcm0_resource), - .resource = s5p6442_pcm0_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -static struct resource s5p6442_pcm1_resource[] = { - [0] = { - .start = S5P6442_PA_PCM1, - .end = S5P6442_PA_PCM1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM1_TX, - .end = DMACH_PCM1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM1_RX, - .end = DMACH_PCM1_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_pcm1 = { - .name = "samsung-pcm", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6442_pcm1_resource), - .resource = s5p6442_pcm1_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c deleted file mode 100644 index cce8c24..0000000 --- a/arch/arm/mach-s5p6442/dev-spi.c +++ /dev/null @@ -1,121 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/dev-spi.c - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <mach/dma.h> -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/spi-clocks.h> - -#include <plat/s3c64xx-spi.h> -#include <plat/gpio-cfg.h> - -static char *spi_src_clks[] = { - [S5P6442_SPI_SRCCLK_PCLK] = "pclk", - [S5P6442_SPI_SRCCLK_SCLK] = "spi_epll", -}; - -/* SPI Controller platform_devices */ - -/* Since we emulate multi-cs capability, we do not touch the CS. - * The emulated CS is toggled by board specific mechanism, as it can - * be either some immediate GPIO or some signal out of some other - * chip in between ... or some yet another way. - * We simply do not assume anything about CS. - */ -static int s5p6442_spi_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(S5P6442_GPB(2), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - break; - - default: - dev_err(&pdev->dev, "Invalid SPI Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct resource s5p6442_spi0_resource[] = { - [0] = { - .start = S5P6442_PA_SPI, - .end = S5P6442_PA_SPI + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI0_TX, - .end = DMACH_SPI0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI0_RX, - .end = DMACH_SPI0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI0, - .end = IRQ_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5p6442_spi0_pdata = { - .cfg_gpio = s5p6442_spi_cfg_gpio, - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, -}; - -static u64 spi_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5p6442_device_spi = { - .name = "s3c64xx-spi", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6442_spi0_resource), - .resource = s5p6442_spi0_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6442_spi0_pdata, - }, -}; - -void __init s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) -{ - struct s3c64xx_spi_info *pd; - - /* Reject invalid configuration */ - if (!num_cs || src_clk_nr < 0 - || src_clk_nr > S5P6442_SPI_SRCCLK_SCLK) { - printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); - return; - } - - switch (cntrlr) { - case 0: - pd = &s5p6442_spi0_pdata; - break; - default: - printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", - __func__, cntrlr); - return; - } - - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - pd->src_clk_name = spi_src_clks[src_clk_nr]; -} diff --git a/arch/arm/mach-s5p6442/dma.c b/arch/arm/mach-s5p6442/dma.c deleted file mode 100644 index 7dfb136..0000000 --- a/arch/arm/mach-s5p6442/dma.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> - -#include <plat/devs.h> -#include <plat/irqs.h> - -#include <mach/map.h> -#include <mach/irqs.h> - -#include <plat/s3c-pl330-pdata.h> - -static u64 dma_dmamask = DMA_BIT_MASK(32); - -static struct resource s5p6442_pdma_resource[] = { - [0] = { - .start = S5P6442_PA_PDMA, - .end = S5P6442_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA, - .end = IRQ_PDMA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c_pl330_platdata s5p6442_pdma_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_MAX, - [7] = DMACH_MAX, - [8] = DMACH_MAX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_MAX, - [15] = DMACH_MAX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_MAX, - [19] = DMACH_MAX, - [20] = DMACH_PCM0_RX, - [21] = DMACH_PCM0_TX, - [22] = DMACH_PCM1_RX, - [23] = DMACH_PCM1_TX, - [24] = DMACH_MAX, - [25] = DMACH_MAX, - [26] = DMACH_MAX, - [27] = DMACH_MSM_REQ0, - [28] = DMACH_MSM_REQ1, - [29] = DMACH_MSM_REQ2, - [30] = DMACH_MSM_REQ3, - [31] = DMACH_MAX, - }, -}; - -static struct platform_device s5p6442_device_pdma = { - .name = "s3c-pl330", - .id = -1, - .num_resources = ARRAY_SIZE(s5p6442_pdma_resource), - .resource = s5p6442_pdma_resource, - .dev = { - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6442_pdma_pdata, - }, -}; - -static struct platform_device *s5p6442_dmacs[] __initdata = { - &s5p6442_device_pdma, -}; - -static int __init s5p6442_dma_init(void) -{ - platform_add_devices(s5p6442_dmacs, ARRAY_SIZE(s5p6442_dmacs)); - - return 0; -} -arch_initcall(s5p6442_dma_init); diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S deleted file mode 100644 index e2213205..0000000 --- a/arch/arm/mach-s5p6442/include/mach/debug-macro.S +++ /dev/null @@ -1,35 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/debug-macro.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include <mach/map.h> -#include <plat/regs-serial.h> - - .macro addruart, rp, rv - ldr \rp, = S3C_PA_UART - ldr \rv, = S3C_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -#define fifo_full fifo_full_s5pv210 -#define fifo_level fifo_level_s5pv210 - -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - -#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5p6442/include/mach/dma.h b/arch/arm/mach-s5p6442/include/mach/dma.h deleted file mode 100644 index 81209eb..0000000 --- a/arch/arm/mach-s5p6442/include/mach/dma.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MACH_DMA_H -#define __MACH_DMA_H - -/* This platform uses the common S3C DMA API driver for PL330 */ -#include <plat/s3c-dma-pl330.h> - -#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/entry-macro.S b/arch/arm/mach-s5p6442/include/mach/entry-macro.S deleted file mode 100644 index 6d574ed..0000000 --- a/arch/arm/mach-s5p6442/include/mach/entry-macro.S +++ /dev/null @@ -1,48 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/entry-macro.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Low-level IRQ helper macros for the Samsung S5P6442 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <asm/hardware/vic.h> -#include <mach/map.h> -#include <plat/irqs.h> - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =VA_VIC0 - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - @ check the vic0 - mov \irqnr, # S5P_IRQ_OFFSET + 31 - ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] - teq \irqstat, #0 - - @ otherwise try vic1 - addeq \tmp, \base, #(VA_VIC1 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - @ otherwise try vic2 - addeq \tmp, \base, #(VA_VIC2 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/arch/arm/mach-s5p6442/include/mach/gpio.h b/arch/arm/mach-s5p6442/include/mach/gpio.h deleted file mode 100644 index b8715df..0000000 --- a/arch/arm/mach-s5p6442/include/mach/gpio.h +++ /dev/null @@ -1,123 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/gpio.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* GPIO bank sizes */ -#define S5P6442_GPIO_A0_NR (8) -#define S5P6442_GPIO_A1_NR (2) -#define S5P6442_GPIO_B_NR (4) -#define S5P6442_GPIO_C0_NR (5) -#define S5P6442_GPIO_C1_NR (5) -#define S5P6442_GPIO_D0_NR (2) -#define S5P6442_GPIO_D1_NR (6) -#define S5P6442_GPIO_E0_NR (8) -#define S5P6442_GPIO_E1_NR (5) -#define S5P6442_GPIO_F0_NR (8) -#define S5P6442_GPIO_F1_NR (8) -#define S5P6442_GPIO_F2_NR (8) -#define S5P6442_GPIO_F3_NR (6) -#define S5P6442_GPIO_G0_NR (7) -#define S5P6442_GPIO_G1_NR (7) -#define S5P6442_GPIO_G2_NR (7) -#define S5P6442_GPIO_H0_NR (8) -#define S5P6442_GPIO_H1_NR (8) -#define S5P6442_GPIO_H2_NR (8) -#define S5P6442_GPIO_H3_NR (8) -#define S5P6442_GPIO_J0_NR (8) -#define S5P6442_GPIO_J1_NR (6) -#define S5P6442_GPIO_J2_NR (8) -#define S5P6442_GPIO_J3_NR (8) -#define S5P6442_GPIO_J4_NR (5) - -/* GPIO bank numbers */ - -/* CONFIG_S3C_GPIO_SPACE allows the user to select extra - * space for debugging purposes so that any accidental - * change from one gpio bank to another can be caught. -*/ - -#define S5P6442_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p_gpio_number { - S5P6442_GPIO_A0_START = 0, - S5P6442_GPIO_A1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A0), - S5P6442_GPIO_B_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A1), - S5P6442_GPIO_C0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_B), - S5P6442_GPIO_C1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C0), - S5P6442_GPIO_D0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C1), - S5P6442_GPIO_D1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D0), - S5P6442_GPIO_E0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D1), - S5P6442_GPIO_E1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E0), - S5P6442_GPIO_F0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E1), - S5P6442_GPIO_F1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F0), - S5P6442_GPIO_F2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F1), - S5P6442_GPIO_F3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F2), - S5P6442_GPIO_G0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F3), - S5P6442_GPIO_G1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G0), - S5P6442_GPIO_G2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G1), - S5P6442_GPIO_H0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G2), - S5P6442_GPIO_H1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H0), - S5P6442_GPIO_H2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H1), - S5P6442_GPIO_H3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H2), - S5P6442_GPIO_J0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H3), - S5P6442_GPIO_J1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J0), - S5P6442_GPIO_J2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J1), - S5P6442_GPIO_J3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J2), - S5P6442_GPIO_J4_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J3), -}; - -/* S5P6442 GPIO number definitions. */ -#define S5P6442_GPA0(_nr) (S5P6442_GPIO_A0_START + (_nr)) -#define S5P6442_GPA1(_nr) (S5P6442_GPIO_A1_START + (_nr)) -#define S5P6442_GPB(_nr) (S5P6442_GPIO_B_START + (_nr)) -#define S5P6442_GPC0(_nr) (S5P6442_GPIO_C0_START + (_nr)) -#define S5P6442_GPC1(_nr) (S5P6442_GPIO_C1_START + (_nr)) -#define S5P6442_GPD0(_nr) (S5P6442_GPIO_D0_START + (_nr)) -#define S5P6442_GPD1(_nr) (S5P6442_GPIO_D1_START + (_nr)) -#define S5P6442_GPE0(_nr) (S5P6442_GPIO_E0_START + (_nr)) -#define S5P6442_GPE1(_nr) (S5P6442_GPIO_E1_START + (_nr)) -#define S5P6442_GPF0(_nr) (S5P6442_GPIO_F0_START + (_nr)) -#define S5P6442_GPF1(_nr) (S5P6442_GPIO_F1_START + (_nr)) -#define S5P6442_GPF2(_nr) (S5P6442_GPIO_F2_START + (_nr)) -#define S5P6442_GPF3(_nr) (S5P6442_GPIO_F3_START + (_nr)) -#define S5P6442_GPG0(_nr) (S5P6442_GPIO_G0_START + (_nr)) -#define S5P6442_GPG1(_nr) (S5P6442_GPIO_G1_START + (_nr)) -#define S5P6442_GPG2(_nr) (S5P6442_GPIO_G2_START + (_nr)) -#define S5P6442_GPH0(_nr) (S5P6442_GPIO_H0_START + (_nr)) -#define S5P6442_GPH1(_nr) (S5P6442_GPIO_H1_START + (_nr)) -#define S5P6442_GPH2(_nr) (S5P6442_GPIO_H2_START + (_nr)) -#define S5P6442_GPH3(_nr) (S5P6442_GPIO_H3_START + (_nr)) -#define S5P6442_GPJ0(_nr) (S5P6442_GPIO_J0_START + (_nr)) -#define S5P6442_GPJ1(_nr) (S5P6442_GPIO_J1_START + (_nr)) -#define S5P6442_GPJ2(_nr) (S5P6442_GPIO_J2_START + (_nr)) -#define S5P6442_GPJ3(_nr) (S5P6442_GPIO_J3_START + (_nr)) -#define S5P6442_GPJ4(_nr) (S5P6442_GPIO_J4_START + (_nr)) - -/* the end of the S5P6442 specific gpios */ -#define S5P6442_GPIO_END (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + 1) -#define S3C_GPIO_END S5P6442_GPIO_END - -/* define the number of gpios we need to the one after the GPJ4() range */ -#define ARCH_NR_GPIOS (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + \ - CONFIG_SAMSUNG_GPIO_EXTRA + 1) - -#include <asm-generic/gpio.h> - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/hardware.h b/arch/arm/mach-s5p6442/include/mach/hardware.h deleted file mode 100644 index 8cd7b67..0000000 --- a/arch/arm/mach-s5p6442/include/mach/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/hardware.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Hardware support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H __FILE__ - -/* currently nothing here, placeholder */ - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/io.h b/arch/arm/mach-s5p6442/include/mach/io.h deleted file mode 100644 index 5d2195a..0000000 --- a/arch/arm/mach-s5p6442/include/mach/io.h +++ /dev/null @@ -1,17 +0,0 @@ -/* arch/arm/mach-s5p6442/include/mach/io.h - * - * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org> - * - * Default IO routines for S5P6442 - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h deleted file mode 100644 index 3fbc6c3..0000000 --- a/arch/arm/mach-s5p6442/include/mach/irqs.h +++ /dev/null @@ -1,87 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/irqs.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - IRQ definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -#include <plat/irqs.h> - -/* VIC0 */ -#define IRQ_EINT16_31 S5P_IRQ_VIC0(16) -#define IRQ_BATF S5P_IRQ_VIC0(17) -#define IRQ_MDMA S5P_IRQ_VIC0(18) -#define IRQ_PDMA S5P_IRQ_VIC0(19) -#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21) -#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22) -#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23) -#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24) -#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25) -#define IRQ_SYSTIMER S5P_IRQ_VIC0(26) -#define IRQ_WDT S5P_IRQ_VIC0(27) -#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28) -#define IRQ_RTC_TIC S5P_IRQ_VIC0(29) -#define IRQ_GPIOINT S5P_IRQ_VIC0(30) - -/* VIC1 */ -#define IRQ_PMU S5P_IRQ_VIC1(0) -#define IRQ_ONENAND S5P_IRQ_VIC1(7) -#define IRQ_UART0 S5P_IRQ_VIC1(10) -#define IRQ_UART1 S5P_IRQ_VIC1(11) -#define IRQ_UART2 S5P_IRQ_VIC1(12) -#define IRQ_SPI0 S5P_IRQ_VIC1(15) -#define IRQ_IIC S5P_IRQ_VIC1(19) -#define IRQ_IIC1 S5P_IRQ_VIC1(20) -#define IRQ_IIC2 S5P_IRQ_VIC1(21) -#define IRQ_OTG S5P_IRQ_VIC1(24) -#define IRQ_MSM S5P_IRQ_VIC1(25) -#define IRQ_HSMMC0 S5P_IRQ_VIC1(26) -#define IRQ_HSMMC1 S5P_IRQ_VIC1(27) -#define IRQ_HSMMC2 S5P_IRQ_VIC1(28) -#define IRQ_COMMRX S5P_IRQ_VIC1(29) -#define IRQ_COMMTX S5P_IRQ_VIC1(30) - -/* VIC2 */ -#define IRQ_LCD0 S5P_IRQ_VIC2(0) -#define IRQ_LCD1 S5P_IRQ_VIC2(1) -#define IRQ_LCD2 S5P_IRQ_VIC2(2) -#define IRQ_LCD3 S5P_IRQ_VIC2(3) -#define IRQ_ROTATOR S5P_IRQ_VIC2(4) -#define IRQ_FIMC0 S5P_IRQ_VIC2(5) -#define IRQ_FIMC1 S5P_IRQ_VIC2(6) -#define IRQ_FIMC2 S5P_IRQ_VIC2(7) -#define IRQ_JPEG S5P_IRQ_VIC2(8) -#define IRQ_3D S5P_IRQ_VIC2(10) -#define IRQ_Mixer S5P_IRQ_VIC2(11) -#define IRQ_MFC S5P_IRQ_VIC2(14) -#define IRQ_TVENC S5P_IRQ_VIC2(15) -#define IRQ_I2S0 S5P_IRQ_VIC2(16) -#define IRQ_I2S1 S5P_IRQ_VIC2(17) -#define IRQ_RP S5P_IRQ_VIC2(19) -#define IRQ_PCM0 S5P_IRQ_VIC2(20) -#define IRQ_PCM1 S5P_IRQ_VIC2(21) -#define IRQ_ADC S5P_IRQ_VIC2(23) -#define IRQ_PENDN S5P_IRQ_VIC2(24) -#define IRQ_KEYPAD S5P_IRQ_VIC2(25) -#define IRQ_SSS_INT S5P_IRQ_VIC2(27) -#define IRQ_SSS_HASH S5P_IRQ_VIC2(28) -#define IRQ_VIC_END S5P_IRQ_VIC2(31) - -#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) - -#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) -#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE) - -/* Set the default NR_IRQS */ - -#define NR_IRQS (IRQ_EINT(31) + 1) - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h deleted file mode 100644 index 058dab4..0000000 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ /dev/null @@ -1,76 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/map.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include <plat/map-base.h> -#include <plat/map-s5p.h> - -#define S5P6442_PA_SDRAM 0x20000000 - -#define S5P6442_PA_I2S0 0xC0B00000 -#define S5P6442_PA_I2S1 0xF2200000 - -#define S5P6442_PA_CHIPID 0xE0000000 - -#define S5P6442_PA_SYSCON 0xE0100000 - -#define S5P6442_PA_GPIO 0xE0200000 - -#define S5P6442_PA_VIC0 0xE4000000 -#define S5P6442_PA_VIC1 0xE4100000 -#define S5P6442_PA_VIC2 0xE4200000 - -#define S5P6442_PA_SROMC 0xE7000000 - -#define S5P6442_PA_MDMA 0xE8000000 -#define S5P6442_PA_PDMA 0xE9000000 - -#define S5P6442_PA_TIMER 0xEA000000 - -#define S5P6442_PA_SYSTIMER 0xEA100000 - -#define S5P6442_PA_WATCHDOG 0xEA200000 - -#define S5P6442_PA_UART 0xEC000000 - -#define S5P6442_PA_IIC0 0xEC100000 - -#define S5P6442_PA_SPI 0xEC300000 - -#define S5P6442_PA_PCM0 0xF2400000 -#define S5P6442_PA_PCM1 0xF2500000 - -/* Compatibiltiy Defines */ - -#define S3C_PA_IIC S5P6442_PA_IIC0 -#define S3C_PA_WDT S5P6442_PA_WATCHDOG - -#define S5P_PA_CHIPID S5P6442_PA_CHIPID -#define S5P_PA_SDRAM S5P6442_PA_SDRAM -#define S5P_PA_SROMC S5P6442_PA_SROMC -#define S5P_PA_SYSCON S5P6442_PA_SYSCON -#define S5P_PA_TIMER S5P6442_PA_TIMER - -/* UART */ - -#define S3C_PA_UART S5P6442_PA_UART - -#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_PA_UART0 S5P_PA_UART(0) -#define S5P_PA_UART1 S5P_PA_UART(1) -#define S5P_PA_UART2 S5P_PA_UART(2) - -#define S5P_SZ_UART SZ_256 - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/memory.h b/arch/arm/mach-s5p6442/include/mach/memory.h deleted file mode 100644 index cfe259d..0000000 --- a/arch/arm/mach-s5p6442/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/memory.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Memory definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x20000000) -#define CONSISTENT_DMA_SIZE SZ_8M - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h deleted file mode 100644 index 2724b37..0000000 --- a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * S5P6442 - pwm clock and timer support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_PWMCLK_H -#define __ASM_ARCH_PWMCLK_H __FILE__ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg == S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK - -#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/regs-clock.h b/arch/arm/mach-s5p6442/include/mach/regs-clock.h deleted file mode 100644 index 00828a3..0000000 --- a/arch/arm/mach-s5p6442/include/mach/regs-clock.h +++ /dev/null @@ -1,104 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/regs-clock.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_CLOCK_H -#define __ASM_ARCH_REGS_CLOCK_H __FILE__ - -#include <mach/map.h> - -#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) - -#define S5P_APLL_LOCK S5P_CLKREG(0x00) -#define S5P_MPLL_LOCK S5P_CLKREG(0x08) -#define S5P_EPLL_LOCK S5P_CLKREG(0x10) -#define S5P_VPLL_LOCK S5P_CLKREG(0x20) - -#define S5P_APLL_CON S5P_CLKREG(0x100) -#define S5P_MPLL_CON S5P_CLKREG(0x108) -#define S5P_EPLL_CON S5P_CLKREG(0x110) -#define S5P_VPLL_CON S5P_CLKREG(0x120) - -#define S5P_CLK_SRC0 S5P_CLKREG(0x200) -#define S5P_CLK_SRC1 S5P_CLKREG(0x204) -#define S5P_CLK_SRC2 S5P_CLKREG(0x208) -#define S5P_CLK_SRC3 S5P_CLKREG(0x20C) -#define S5P_CLK_SRC4 S5P_CLKREG(0x210) -#define S5P_CLK_SRC5 S5P_CLKREG(0x214) -#define S5P_CLK_SRC6 S5P_CLKREG(0x218) - -#define S5P_CLK_SRC_MASK0 S5P_CLKREG(0x280) -#define S5P_CLK_SRC_MASK1 S5P_CLKREG(0x284) - -#define S5P_CLK_DIV0 S5P_CLKREG(0x300) -#define S5P_CLK_DIV1 S5P_CLKREG(0x304) -#define S5P_CLK_DIV2 S5P_CLKREG(0x308) -#define S5P_CLK_DIV3 S5P_CLKREG(0x30C) -#define S5P_CLK_DIV4 S5P_CLKREG(0x310) -#define S5P_CLK_DIV5 S5P_CLKREG(0x314) -#define S5P_CLK_DIV6 S5P_CLKREG(0x318) - -#define S5P_CLKGATE_IP0 S5P_CLKREG(0x460) -#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C) - -/* CLK_OUT */ -#define S5P_CLK_OUT_SHIFT (12) -#define S5P_CLK_OUT_MASK (0x1F << S5P_CLK_OUT_SHIFT) -#define S5P_CLK_OUT S5P_CLKREG(0x500) - -#define S5P_CLK_DIV_STAT0 S5P_CLKREG(0x1000) -#define S5P_CLK_DIV_STAT1 S5P_CLKREG(0x1004) - -#define S5P_CLK_MUX_STAT0 S5P_CLKREG(0x1100) -#define S5P_CLK_MUX_STAT1 S5P_CLKREG(0x1104) - -#define S5P_MDNIE_SEL S5P_CLKREG(0x7008) - -/* Register Bit definition */ -#define S5P_EPLL_EN (1<<31) -#define S5P_EPLL_MASK 0xffffffff -#define S5P_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s))) - -/* CLKDIV0 */ -#define S5P_CLKDIV0_APLL_SHIFT (0) -#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT) -#define S5P_CLKDIV0_A2M_SHIFT (4) -#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT) -#define S5P_CLKDIV0_D0CLK_SHIFT (16) -#define S5P_CLKDIV0_D0CLK_MASK (0xF << S5P_CLKDIV0_D0CLK_SHIFT) -#define S5P_CLKDIV0_P0CLK_SHIFT (20) -#define S5P_CLKDIV0_P0CLK_MASK (0x7 << S5P_CLKDIV0_P0CLK_SHIFT) -#define S5P_CLKDIV0_D1CLK_SHIFT (24) -#define S5P_CLKDIV0_D1CLK_MASK (0xF << S5P_CLKDIV0_D1CLK_SHIFT) -#define S5P_CLKDIV0_P1CLK_SHIFT (28) -#define S5P_CLKDIV0_P1CLK_MASK (0x7 << S5P_CLKDIV0_P1CLK_SHIFT) - -/* Clock MUX status Registers */ -#define S5P_CLK_MUX_STAT0_APLL_SHIFT (0) -#define S5P_CLK_MUX_STAT0_APLL_MASK (0x7 << S5P_CLK_MUX_STAT0_APLL_SHIFT) -#define S5P_CLK_MUX_STAT0_MPLL_SHIFT (4) -#define S5P_CLK_MUX_STAT0_MPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_MPLL_SHIFT) -#define S5P_CLK_MUX_STAT0_EPLL_SHIFT (8) -#define S5P_CLK_MUX_STAT0_EPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_EPLL_SHIFT) -#define S5P_CLK_MUX_STAT0_VPLL_SHIFT (12) -#define S5P_CLK_MUX_STAT0_VPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_VPLL_SHIFT) -#define S5P_CLK_MUX_STAT0_MUXARM_SHIFT (16) -#define S5P_CLK_MUX_STAT0_MUXARM_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXARM_SHIFT) -#define S5P_CLK_MUX_STAT0_MUXD0_SHIFT (20) -#define S5P_CLK_MUX_STAT0_MUXD0_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD0_SHIFT) -#define S5P_CLK_MUX_STAT0_MUXD1_SHIFT (24) -#define S5P_CLK_MUX_STAT0_MUXD1_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD1_SHIFT) -#define S5P_CLK_MUX_STAT1_D1SYNC_SHIFT (24) -#define S5P_CLK_MUX_STAT1_D1SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D1SYNC_SHIFT) -#define S5P_CLK_MUX_STAT1_D0SYNC_SHIFT (28) -#define S5P_CLK_MUX_STAT1_D0SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D0SYNC_SHIFT) - -#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/regs-irq.h b/arch/arm/mach-s5p6442/include/mach/regs-irq.h deleted file mode 100644 index 73782b5..0000000 --- a/arch/arm/mach-s5p6442/include/mach/regs-irq.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/regs-irq.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - IRQ register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_IRQ_H -#define __ASM_ARCH_REGS_IRQ_H __FILE__ - -#include <asm/hardware/vic.h> -#include <mach/map.h> - -#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/spi-clocks.h b/arch/arm/mach-s5p6442/include/mach/spi-clocks.h deleted file mode 100644 index 7fd8820..0000000 --- a/arch/arm/mach-s5p6442/include/mach/spi-clocks.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/spi-clocks.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S5P6442_PLAT_SPI_CLKS_H -#define __S5P6442_PLAT_SPI_CLKS_H __FILE__ - -#define S5P6442_SPI_SRCCLK_PCLK 0 -#define S5P6442_SPI_SRCCLK_SCLK 1 - -#endif /* __S5P6442_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/system.h b/arch/arm/mach-s5p6442/include/mach/system.h deleted file mode 100644 index c30c1cc..0000000 --- a/arch/arm/mach-s5p6442/include/mach/system.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/system.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -#include <plat/system-reset.h> - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/tick.h b/arch/arm/mach-s5p6442/include/mach/tick.h deleted file mode 100644 index e1d4cab..0000000 --- a/arch/arm/mach-s5p6442/include/mach/tick.h +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/tick.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s3c6400/include/mach/tick.h - * - * S5P6442 - Timer tick support definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); - return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/timex.h b/arch/arm/mach-s5p6442/include/mach/timex.h deleted file mode 100644 index ff8f2fc..0000000 --- a/arch/arm/mach-s5p6442/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s5p6442/include/mach/timex.h - * - * Copyright (c) 2003-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S5P6442 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/uncompress.h b/arch/arm/mach-s5p6442/include/mach/uncompress.h deleted file mode 100644 index 5ac7cbe..0000000 --- a/arch/arm/mach-s5p6442/include/mach/uncompress.h +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/uncompress.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/map.h> -#include <plat/uncompress.h> - -static void arch_detect_cpu(void) -{ - /* we do not need to do any cpu detection here at the moment. */ -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h deleted file mode 100644 index 4aa55e5..0000000 --- a/arch/arm/mach-s5p6442/include/mach/vmalloc.h +++ /dev/null @@ -1,17 +0,0 @@ -/* arch/arm/mach-s5p6442/include/mach/vmalloc.h - * - * Copyright 2010 Ben Dooks <ben-linux@fluff.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S5P6442 vmalloc definition -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END 0xF6000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5p6442/init.c b/arch/arm/mach-s5p6442/init.c deleted file mode 100644 index 1874bdb..0000000 --- a/arch/arm/mach-s5p6442/init.c +++ /dev/null @@ -1,44 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/s5p6442-init.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/s5p6442.h> -#include <plat/regs-serial.h> - -static struct s3c24xx_uart_clksrc s5p6442_serial_clocks[] = { - [0] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - -/* uart registration process */ -void __init s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->clocks = s5p6442_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5p6442_serial_clocks); - } - } - - s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c deleted file mode 100644 index eaf6b9c..0000000 --- a/arch/arm/mach-s5p6442/mach-smdk6442.c +++ /dev/null @@ -1,102 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/mach-smdk6442.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/i2c.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/regs-serial.h> -#include <plat/s5p6442.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <plat/iic.h> - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDK6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDK6442_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDK6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDK6442_UCON_DEFAULT, - .ulcon = SMDK6442_ULCON_DEFAULT, - .ufcon = SMDK6442_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDK6442_UCON_DEFAULT, - .ulcon = SMDK6442_ULCON_DEFAULT, - .ufcon = SMDK6442_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDK6442_UCON_DEFAULT, - .ulcon = SMDK6442_ULCON_DEFAULT, - .ufcon = SMDK6442_UFCON_DEFAULT, - }, -}; - -static struct platform_device *smdk6442_devices[] __initdata = { - &s3c_device_i2c0, - &samsung_asoc_dma, - &s5p6442_device_iis0, - &s3c_device_wdt, -}; - -static struct i2c_board_info smdk6442_i2c_devs0[] __initdata = { - { I2C_BOARD_INFO("wm8580", 0x1b), }, -}; - -static void __init smdk6442_map_io(void) -{ - s5p_init_io(NULL, 0, S5P_VA_CHIPID); - s3c24xx_init_clocks(12000000); - s3c24xx_init_uarts(smdk6442_uartcfgs, ARRAY_SIZE(smdk6442_uartcfgs)); -} - -static void __init smdk6442_machine_init(void) -{ - s3c_i2c0_set_platdata(NULL); - i2c_register_board_info(0, smdk6442_i2c_devs0, - ARRAY_SIZE(smdk6442_i2c_devs0)); - platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices)); -} - -MACHINE_START(SMDK6442, "SMDK6442") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, - .init_irq = s5p6442_init_irq, - .map_io = smdk6442_map_io, - .init_machine = smdk6442_machine_init, - .timer = &s3c24xx_timer, -MACHINE_END diff --git a/arch/arm/mach-s5p6442/setup-i2c0.c b/arch/arm/mach-s5p6442/setup-i2c0.c deleted file mode 100644 index aad8565..0000000 --- a/arch/arm/mach-s5p6442/setup-i2c0.c +++ /dev/null @@ -1,28 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/setup-i2c0.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * I2C0 GPIO configuration. - * - * Based on plat-s3c64xx/setup-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/gpio.h> - -struct platform_device; /* don't need the contents */ - -#include <plat/gpio-cfg.h> -#include <plat/iic.h> - -void s3c_i2c0_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5P6442_GPD1(0), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index bf0b024..7c6cb4fa 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -99,8 +99,11 @@ static void sdi0_configure(void) gpio_direction_output(sdi0_vsel, 0); gpio_direction_output(sdi0_en, 1); - /* Add the device */ - db8500_add_sdi0(&mop500_sdi0_data); + /* Add the device, force v2 to subrevision 1 */ + if (cpu_is_u8500v2()) + db8500_add_sdi0(&mop500_sdi0_data, 0x10480180); + else + db8500_add_sdi0(&mop500_sdi0_data, 0); } void mop500_sdi_tc35892_init(void) @@ -188,13 +191,18 @@ static struct mmci_platform_data mop500_sdi4_data = { void __init mop500_sdi_init(void) { + u32 periphid = 0; + + /* v2 has a new version of this block that need to be forced */ + if (cpu_is_u8500v2()) + periphid = 0x10480180; /* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */ if (!cpu_is_u8500v10()) mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; - db8500_add_sdi2(&mop500_sdi2_data); + db8500_add_sdi2(&mop500_sdi2_data, periphid); /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data); + db8500_add_sdi4(&mop500_sdi4_data, periphid); if (machine_is_hrefv60()) { mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index c719b5a1..7825705 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -28,18 +28,20 @@ dbx500_add_msp_spi(const char *name, resource_size_t base, int irq, static inline struct amba_device * dbx500_add_spi(const char *name, resource_size_t base, int irq, - struct spi_master_cntlr *pdata) + struct spi_master_cntlr *pdata, + u32 periphid) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(name, base, irq, pdata, periphid); } struct mmci_platform_data; static inline struct amba_device * dbx500_add_sdi(const char *name, resource_size_t base, int irq, - struct mmci_platform_data *pdata) + struct mmci_platform_data *pdata, + u32 periphid) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(name, base, irq, pdata, periphid); } struct amba_pl011_data; diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h index 94627f7..0c4bccd 100644 --- a/arch/arm/mach-ux500/devices-db5500.h +++ b/arch/arm/mach-ux500/devices-db5500.h @@ -38,24 +38,34 @@ ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg) #define db5500_add_sdi0(pdata) \ - dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata) + dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \ + 0x10480180) #define db5500_add_sdi1(pdata) \ - dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata) + dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \ + 0x10480180) #define db5500_add_sdi2(pdata) \ - dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata) + dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \ + 0x10480180) #define db5500_add_sdi3(pdata) \ - dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata) + dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \ + 0x10480180) #define db5500_add_sdi4(pdata) \ - dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata) + dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \ + 0x10480180) +/* This one has a bad peripheral ID in the U5500 silicon */ #define db5500_add_spi0(pdata) \ - dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata) + dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \ + 0x10080023) #define db5500_add_spi1(pdata) \ - dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata) + dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \ + 0x10080023) #define db5500_add_spi2(pdata) \ - dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata) + dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \ + 0x10080023) #define db5500_add_spi3(pdata) \ - dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata) + dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \ + 0x10080023) #define db5500_add_uart0(plat) \ dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat) diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index 9cc6f8f..cbd4a9a 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -25,7 +25,7 @@ static inline struct amba_device * db8500_add_ssp(const char *name, resource_size_t base, int irq, struct pl022_ssp_controller *pdata) { - return dbx500_add_amba_device(name, base, irq, pdata, SSP_PER_ID); + return dbx500_add_amba_device(name, base, irq, pdata, 0); } @@ -64,18 +64,18 @@ db8500_add_ssp(const char *name, resource_size_t base, int irq, #define db8500_add_usb(rx_cfg, tx_cfg) \ ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg) -#define db8500_add_sdi0(pdata) \ - dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata) -#define db8500_add_sdi1(pdata) \ - dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata) -#define db8500_add_sdi2(pdata) \ - dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata) -#define db8500_add_sdi3(pdata) \ - dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata) -#define db8500_add_sdi4(pdata) \ - dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata) -#define db8500_add_sdi5(pdata) \ - dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata) +#define db8500_add_sdi0(pdata, pid) \ + dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid) +#define db8500_add_sdi1(pdata, pid) \ + dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid) +#define db8500_add_sdi2(pdata, pid) \ + dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid) +#define db8500_add_sdi3(pdata, pid) \ + dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid) +#define db8500_add_sdi4(pdata, pid) \ + dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid) +#define db8500_add_sdi5(pdata, pid) \ + dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid) #define db8500_add_ssp0(pdata) \ db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata) @@ -83,13 +83,13 @@ db8500_add_ssp(const char *name, resource_size_t base, int irq, db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata) #define db8500_add_spi0(pdata) \ - dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata) + dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0) #define db8500_add_spi1(pdata) \ - dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata) + dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0) #define db8500_add_spi2(pdata) \ - dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata) + dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0) #define db8500_add_spi3(pdata) \ - dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata) + dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0) #define db8500_add_uart0(pdata) \ dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata) diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 2c6f710..470ac52 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -29,9 +29,6 @@ #include <mach/db8500-regs.h> #include <mach/db5500-regs.h> -/* ST-Ericsson modified pl022 id */ -#define SSP_PER_ID 0x01080022 - #ifndef __ASSEMBLY__ #include <mach/id.h> diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index c96fa1b..73b4a8b 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -176,6 +176,7 @@ ENDPROC(v6_coherent_kern_range) */ ENTRY(v6_flush_kern_dcache_area) add r1, r0, r1 + bic r0, r0, #D_CACHE_LINE_SIZE - 1 1: #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index dc18d81..d32f02b 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -221,6 +221,8 @@ ENDPROC(v7_coherent_user_range) ENTRY(v7_flush_kern_dcache_area) dcache_line_size r2, r3 add r1, r0, r1 + sub r3, r2, #1 + bic r0, r0, r3 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index b0ee9ba..8bfae96 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -24,9 +24,7 @@ DEFINE_PER_CPU(struct mm_struct *, current_mm); /* * We fork()ed a process, and we need a new context for the child - * to run in. We reserve version 0 for initial tasks so we will - * always allocate an ASID. The ASID 0 is reserved for the TTBR - * register changing sequence. + * to run in. */ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) { @@ -36,8 +34,11 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) static void flush_context(void) { - /* set the reserved ASID before flushing the TLB */ - asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0)); + u32 ttb; + /* Copy TTBR1 into TTBR0 */ + asm volatile("mrc p15, 0, %0, c2, c0, 1\n" + "mcr p15, 0, %0, c2, c0, 0" + : "=r" (ttb)); isb(); local_flush_tlb_all(); if (icache_is_vivt_asid_tagged()) { @@ -93,7 +94,7 @@ static void reset_context(void *info) return; smp_rmb(); - asid = cpu_last_asid + cpu + 1; + asid = cpu_last_asid + cpu; flush_context(); set_mm_context(mm, asid); @@ -143,13 +144,13 @@ void __new_context(struct mm_struct *mm) * to start a new version and flush the TLB. */ if (unlikely((asid & ~ASID_MASK) == 0)) { - asid = cpu_last_asid + smp_processor_id() + 1; + asid = cpu_last_asid + smp_processor_id(); flush_context(); #ifdef CONFIG_SMP smp_wmb(); smp_call_function(reset_context, NULL, 1); #endif - cpu_last_asid += NR_CPUS; + cpu_last_asid += NR_CPUS - 1; } set_mm_context(mm, asid); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 3f17ea1..2c2cce9 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -15,12 +15,14 @@ #include <linux/mman.h> #include <linux/nodemask.h> #include <linux/initrd.h> +#include <linux/of_fdt.h> #include <linux/highmem.h> #include <linux/gfp.h> #include <linux/memblock.h> #include <linux/sort.h> #include <asm/mach-types.h> +#include <asm/prom.h> #include <asm/sections.h> #include <asm/setup.h> #include <asm/sizes.h> @@ -71,6 +73,14 @@ static int __init parse_tag_initrd2(const struct tag *tag) __tagtable(ATAG_INITRD2, parse_tag_initrd2); +#ifdef CONFIG_OF_FLATTREE +void __init early_init_dt_setup_initrd_arch(unsigned long start, unsigned long end) +{ + phys_initrd_start = start; + phys_initrd_size = end - start; +} +#endif /* CONFIG_OF_FLATTREE */ + /* * This keeps memory configuration data used by a couple memory * initialization functions, as well as show_mem() for the skipping @@ -273,13 +283,15 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low, free_area_init_node(0, zone_size, min, zhole_size); } -#ifndef CONFIG_SPARSEMEM +#ifdef CONFIG_HAVE_ARCH_PFN_VALID int pfn_valid(unsigned long pfn) { return memblock_is_memory(pfn << PAGE_SHIFT); } EXPORT_SYMBOL(pfn_valid); +#endif +#ifndef CONFIG_SPARSEMEM static void arm_memory_present(void) { } @@ -334,6 +346,7 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) #endif arm_mm_memblock_reserve(); + arm_dt_memblock_reserve(); /* reserve any platform specific memblock areas */ if (mdesc->reserve) diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index d238410..5b3d7d5 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -5,14 +5,9 @@ extern pmd_t *top_pmd; #define TOP_PTE(x) pte_offset_kernel(top_pmd, x) -static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt) -{ - return pmd_offset(pud_offset(pgd, virt), virt); -} - static inline pmd_t *pmd_off_k(unsigned long virt) { - return pmd_off(pgd_offset_k(virt), virt); + return pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt); } struct mem_type { diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 08a9236..9d9e736 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -763,15 +763,12 @@ static void __init sanity_check_meminfo(void) { int i, j, highmem = 0; - lowmem_limit = __pa(vmalloc_min - 1) + 1; - memblock_set_current_limit(lowmem_limit); - for (i = 0, j = 0; i < meminfo.nr_banks; i++) { struct membank *bank = &meminfo.bank[j]; *bank = meminfo.bank[i]; #ifdef CONFIG_HIGHMEM - if (__va(bank->start) > vmalloc_min || + if (__va(bank->start) >= vmalloc_min || __va(bank->start) < (void *)PAGE_OFFSET) highmem = 1; @@ -829,6 +826,9 @@ static void __init sanity_check_meminfo(void) bank->size = newsize; } #endif + if (!bank->highmem && bank->start + bank->size > lowmem_limit) + lowmem_limit = bank->start + bank->size; + j++; } #ifdef CONFIG_HIGHMEM @@ -852,6 +852,7 @@ static void __init sanity_check_meminfo(void) } #endif meminfo.nr_banks = j; + memblock_set_current_limit(lowmem_limit); } static inline void prepare_page_table(void) diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index ab17cc0..1d2b845 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -213,7 +213,9 @@ __v6_setup: mcr p15, 0, r0, c2, c0, 2 @ TTB control register ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) ALT_UP(orr r4, r4, #TTB_FLAGS_UP) - mcr p15, 0, r4, c2, c0, 1 @ load TTB1 + ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP) + ALT_UP(orr r8, r8, #TTB_FLAGS_UP) + mcr p15, 0, r8, c2, c0, 1 @ load TTB1 #endif /* CONFIG_MMU */ adr r5, v6_crval ldmia r5, {r5, r6} diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index babfba09..b3b566e 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -108,18 +108,16 @@ ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_ARM_ERRATA_430973 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB #endif -#ifdef CONFIG_ARM_ERRATA_754322 - dsb -#endif - mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID - isb -1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 + mrc p15, 0, r2, c2, c0, 1 @ load TTB 1 + mcr p15, 0, r2, c2, c0, 0 @ into TTB 0 isb #ifdef CONFIG_ARM_ERRATA_754322 dsb #endif mcr p15, 0, r1, c13, c0, 1 @ set context ID isb + mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 + isb #endif mov pc, lr ENDPROC(cpu_v7_switch_mm) @@ -368,7 +366,9 @@ __v7_setup: mcr p15, 0, r10, c2, c0, 2 @ TTB control register ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) ALT_UP(orr r4, r4, #TTB_FLAGS_UP) - mcr p15, 0, r4, c2, c0, 1 @ load TTB1 + ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP) + ALT_UP(orr r8, r8, #TTB_FLAGS_UP) + mcr p15, 0, r8, c2, c0, 1 @ load TTB1 ldr r5, =PRRR @ PRRR ldr r6, =NMRR @ NMRR mcr p15, 0, r5, c10, c2, 0 @ write PRRR diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 6751bcf..e98f5c5 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -7,7 +7,7 @@ config PLAT_S5P bool - depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4) + depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4) default y select ARM_VIC if !ARCH_EXYNOS4 select ARM_GIC if ARCH_EXYNOS4 diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index 5cf5e72..bbc2aa7 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -21,7 +21,6 @@ #include <plat/cpu.h> #include <plat/s5p6440.h> -#include <plat/s5p6442.h> #include <plat/s5p6450.h> #include <plat/s5pc100.h> #include <plat/s5pv210.h> @@ -30,7 +29,6 @@ /* table of supported CPUs */ static const char name_s5p6440[] = "S5P6440"; -static const char name_s5p6442[] = "S5P6442"; static const char name_s5p6450[] = "S5P6450"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; @@ -46,14 +44,6 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s5p64x0_init, .name = name_s5p6440, }, { - .idcode = 0x36442000, - .idmask = 0xfffff000, - .map_io = s5p6442_map_io, - .init_clocks = s5p6442_init_clocks, - .init_uarts = s5p6442_init_uarts, - .init = s5p6442_init, - .name = name_s5p6442, - }, { .idcode = 0x36450000, .idmask = 0xfffff000, .map_io = s5p6450_map_io, diff --git a/arch/arm/plat-s5p/include/plat/s5p6442.h b/arch/arm/plat-s5p/include/plat/s5p6442.h deleted file mode 100644 index 7b88013..0000000 --- a/arch/arm/plat-s5p/include/plat/s5p6442.h +++ /dev/null @@ -1,33 +0,0 @@ -/* arch/arm/plat-s5p/include/plat/s5p6442.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5p6442 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5P6442 related SoCs */ - -extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5p6442_register_clocks(void); -extern void s5p6442_setup_clocks(void); - -#ifdef CONFIG_CPU_S5P6442 - -extern int s5p6442_init(void); -extern void s5p6442_init_irq(void); -extern void s5p6442_map_io(void); -extern void s5p6442_init_clocks(int xtal); - -#define s5p6442_init_uarts s5p6442_common_init_uarts - -#else -#define s5p6442_init_clocks NULL -#define s5p6442_init_uarts NULL -#define s5p6442_map_io NULL -#define s5p6442_init NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 3aedac0..c0a5741 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -86,7 +86,6 @@ extern struct sysdev_class s3c2443_sysclass; extern struct sysdev_class s3c6410_sysclass; extern struct sysdev_class s3c64xx_sysclass; extern struct sysdev_class s5p64x0_sysclass; -extern struct sysdev_class s5p6442_sysclass; extern struct sysdev_class s5pv210_sysclass; extern struct sysdev_class exynos4_sysclass; diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S index dc6efd9..207e275 100644 --- a/arch/arm/plat-samsung/include/plat/debug-macro.S +++ b/arch/arm/plat-samsung/include/plat/debug-macro.S @@ -11,7 +11,7 @@ #include <plat/regs-serial.h> -/* The S5PV210/S5PC110 and S5P6442 implementations are as belows. */ +/* The S5PV210/S5PC110 implementations are as belows. */ .macro fifo_level_s5pv210 rd, rx ldr \rd, [ \rx, # S3C2410_UFSTAT ] diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 39818d8..b61b8ee 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -111,12 +111,6 @@ extern struct platform_device exynos4_device_spdif; extern struct platform_device exynos4_device_pd[]; extern struct platform_device exynos4_device_ahci; -extern struct platform_device s5p6442_device_pcm0; -extern struct platform_device s5p6442_device_pcm1; -extern struct platform_device s5p6442_device_iis0; -extern struct platform_device s5p6442_device_iis1; -extern struct platform_device s5p6442_device_spi; - extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index 788837e9..c151c5f 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -194,7 +194,7 @@ #define S3C64XX_UINTSP 0x34 #define S3C64XX_UINTM 0x38 -/* Following are specific to S5PV210 and S5P6442 */ +/* Following are specific to S5PV210 */ #define S5PV210_UCON_CLKMASK (1<<10) #define S5PV210_UCON_PCLK (0<<10) #define S5PV210_UCON_UCLK (1<<10) diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index ff1a561..0ffe34a 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -69,6 +69,5 @@ extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); -extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); #endif /* __S3C64XX_PLAT_SPI_H */ diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index bfc9d07..aa677e2 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1014,6 +1014,7 @@ static struct platform_device *__initdata at32_usarts[4]; void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (hw_id) { case 0: @@ -1042,7 +1043,8 @@ void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) data->regs = (void __iomem *)pdev->resource[0].start; } - pdev->id = line; + pdata = pdev->dev.platform_data; + pdata->num = portnr; at32_usarts[line] = pdev; } diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index 6174020..679458d 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -33,6 +33,7 @@ extern struct platform_device *atmel_default_console_device; #define ATMEL_USART_CLK 0x04 struct atmel_uart_data { + int num; /* port num */ short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virtual base address, if any */ diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c index 00ee90f..b15cc21 100644 --- a/arch/microblaze/kernel/prom.c +++ b/arch/microblaze/kernel/prom.c @@ -130,7 +130,7 @@ void __init early_init_devtree(void *params) * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... */ - of_scan_flat_dt(early_init_dt_scan_chosen, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line); /* Scan memory nodes and rebuild MEMBLOCKs */ memblock_init(); diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h index f29b862..857d9b7 100644 --- a/arch/mips/include/asm/prom.h +++ b/arch/mips/include/asm/prom.h @@ -14,9 +14,6 @@ #ifdef CONFIG_OF #include <asm/bootinfo.h> -/* which is compatible with the flattened device tree (FDT) */ -#define cmd_line arcs_cmdline - extern int early_init_dt_scan_memory_arch(unsigned long node, const char *uname, int depth, void *data); diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c index a19811e9..5b7eade4 100644 --- a/arch/mips/kernel/prom.c +++ b/arch/mips/kernel/prom.c @@ -83,7 +83,8 @@ void __init early_init_devtree(void *params) * device-tree, including the platform type, initrd location and * size, and more ... */ - of_scan_flat_dt(early_init_dt_scan_chosen, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen, arcs_cmdline); + /* Scan memory nodes */ of_scan_flat_dt(early_init_dt_scan_root, NULL); diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 48aeb55..f2c906b 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -694,7 +694,7 @@ void __init early_init_devtree(void *params) * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... */ - of_scan_flat_dt(early_init_dt_scan_chosen_ppc, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line); /* Scan memory nodes and rebuild MEMBLOCKs */ memblock_init(); diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index 7025593..d74926e 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -603,6 +603,10 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) if (ret) goto err_out; + /* Hard-coded primecell ID instead of plug-n-play */ + if (dev->periphid != 0) + goto skip_probe; + /* * Dynamically calculate the size of the resource * and use this for iomap @@ -643,6 +647,7 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) if (ret) goto err_release; + skip_probe: ret = device_add(&dev->dev); if (ret) goto err_release; diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 4941e06..5da5bea0 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -51,6 +51,7 @@ static unsigned int fmax = 515633; * is asserted (likewise for RX) * @sdio: variant supports SDIO * @st_clkdiv: true if using a ST-specific clock divider algorithm + * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register */ struct variant_data { unsigned int clkreg; @@ -60,6 +61,7 @@ struct variant_data { unsigned int fifohalfsize; bool sdio; bool st_clkdiv; + bool blksz_datactrl16; }; static struct variant_data variant_arm = { @@ -92,6 +94,17 @@ static struct variant_data variant_ux500 = { .st_clkdiv = true, }; +static struct variant_data variant_ux500v2 = { + .fifosize = 30 * 4, + .fifohalfsize = 8 * 4, + .clkreg = MCI_CLK_ENABLE, + .clkreg_enable = MCI_ST_UX500_HWFCEN, + .datalength_bits = 24, + .sdio = true, + .st_clkdiv = true, + .blksz_datactrl16 = true, +}; + /* * This must be called with host->lock held */ @@ -465,7 +478,10 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) blksz_bits = ffs(data->blksz) - 1; BUG_ON(1 << blksz_bits != data->blksz); - datactrl = MCI_DPSM_ENABLE | blksz_bits << 4; + if (variant->blksz_datactrl16) + datactrl = MCI_DPSM_ENABLE | (data->blksz << 16); + else + datactrl = MCI_DPSM_ENABLE | blksz_bits << 4; if (data->flags & MMC_DATA_READ) datactrl |= MCI_DPSM_DIRECTION; @@ -1311,9 +1327,14 @@ static struct amba_id mmci_ids[] = { }, { .id = 0x00480180, - .mask = 0x00ffffff, + .mask = 0xf0ffffff, .data = &variant_ux500, }, + { + .id = 0x10480180, + .mask = 0xf0ffffff, + .data = &variant_ux500v2, + }, { 0, 0 }, }; diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index 8b63a69..65200af 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -670,7 +670,7 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname); - if (depth != 1 || + if (depth != 1 || !data || (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0)) return 0; @@ -679,16 +679,16 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, /* Retrieve command line */ p = of_get_flat_dt_prop(node, "bootargs", &l); if (p != NULL && l > 0) - strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE)); + strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); #ifdef CONFIG_CMDLINE #ifndef CONFIG_CMDLINE_FORCE if (p == NULL || l == 0 || (l == 1 && (*p) == 0)) #endif - strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); + strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE); #endif /* CONFIG_CMDLINE */ - pr_debug("Command line is: %s\n", cmd_line); + pr_debug("Command line is: %s\n", (char*)data); /* break now */ return 1; diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 652bdac..6d5d6e6 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1420,7 +1420,7 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, port->flags = UPF_BOOT_AUTOCONF; port->ops = &atmel_pops; port->fifosize = 1; - port->line = pdev->id; + port->line = data->num; port->dev = &pdev->dev; port->mapbase = pdev->resource[0].start; port->irq = pdev->resource[1].start; diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 29312bd..c928dac 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -1051,12 +1051,14 @@ static inline struct mem_section *__pfn_to_section(unsigned long pfn) return __nr_to_section(pfn_to_section_nr(pfn)); } +#ifndef CONFIG_HAVE_ARCH_PFN_VALID static inline int pfn_valid(unsigned long pfn) { if (pfn_to_section_nr(pfn) >= NR_MEM_SECTIONS) return 0; return valid_section(__nr_to_section(pfn_to_section_nr(pfn))); } +#endif static inline int pfn_present(unsigned long pfn) { diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index 459566b..d155cbb 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -1,6 +1,6 @@ config SND_SOC_SAMSUNG tristate "ASoC support for Samsung" - depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_EXYNOS4 + depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_EXYNOS4 select S3C64XX_DMA if ARCH_S3C64XX select S3C2410_DMA if ARCH_S3C2410 help @@ -55,7 +55,7 @@ config SND_SOC_SAMSUNG_JIVE_WM8750 config SND_SOC_SAMSUNG_SMDK_WM8580 tristate "SoC I2S Audio support for WM8580 on SMDK" - depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDK6440 || MACH_SMDK6450 || MACH_SMDK6442 || MACH_SMDKV210 || MACH_SMDKC110) + depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDK6440 || MACH_SMDK6450 || MACH_SMDKV210 || MACH_SMDKC110) select SND_SOC_WM8580 select SND_SAMSUNG_I2S help diff --git a/sound/soc/samsung/smdk_wm8580.c b/sound/soc/samsung/smdk_wm8580.c index 8aacf23..3d26f66 100644 --- a/sound/soc/samsung/smdk_wm8580.c +++ b/sound/soc/samsung/smdk_wm8580.c @@ -249,7 +249,7 @@ static int __init smdk_audio_init(void) int ret; char *str; - if (machine_is_smdkc100() || machine_is_smdk6442() + if (machine_is_smdkc100() || machine_is_smdkv210() || machine_is_smdkc110()) { smdk.num_links = 3; /* Secondary is at offset SAMSUNG_I2S_SECOFF from Primary */ |
