summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/power_supply_class.txt6
-rw-r--r--MAINTAINERS1
-rw-r--r--drivers/power/apm_power.c94
-rw-r--r--drivers/power/olpc_battery.c9
-rw-r--r--drivers/power/pda_power.c282
-rw-r--r--drivers/power/power_supply_leds.c27
-rw-r--r--drivers/power/power_supply_sysfs.c19
-rw-r--r--include/linux/pda_power.h1
-rw-r--r--include/linux/power_supply.h13
9 files changed, 300 insertions, 152 deletions
diff --git a/Documentation/power_supply_class.txt b/Documentation/power_supply_class.txt
index 9758cf4..a8686e5 100644
--- a/Documentation/power_supply_class.txt
+++ b/Documentation/power_supply_class.txt
@@ -87,6 +87,10 @@ batteries use voltage for very approximated calculation of capacity.
Battery driver also can use this attribute just to inform userspace
about maximal and minimal voltage thresholds of a given battery.
+VOLTAGE_MAX, VOLTAGE_MIN - same as _DESIGN voltage values except that
+these ones should be used if hardware could only guess (measure and
+retain) the thresholds of a given power supply.
+
CHARGE_FULL_DESIGN, CHARGE_EMPTY_DESIGN - design charge values, when
battery considered full/empty.
@@ -100,8 +104,6 @@ age)". I.e. these attributes represents real thresholds, not design values.
ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
CAPACITY - capacity in percents.
-CAPACITY_LEVEL - capacity level. This corresponds to
-POWER_SUPPLY_CAPACITY_LEVEL_*.
TEMP - temperature of the power supply.
TEMP_AMBIENT - ambient temperature.
diff --git a/MAINTAINERS b/MAINTAINERS
index 6cae137..58b1603 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3053,7 +3053,6 @@ M: cbou@mail.ru
P: David Woodhouse
M: dwmw2@infradead.org
L: linux-kernel@vger.kernel.org
-L: kernel-discuss@handhelds.org
T: git git.infradead.org/battery-2.6.git
S: Maintained
diff --git a/drivers/power/apm_power.c b/drivers/power/apm_power.c
index 7e29b90..a489227 100644
--- a/drivers/power/apm_power.c
+++ b/drivers/power/apm_power.c
@@ -13,7 +13,7 @@
#include <linux/power_supply.h>
#include <linux/apm-emulation.h>
-static DEFINE_MUTEX(apm_mutex);
+
#define PSY_PROP(psy, prop, val) psy->get_property(psy, \
POWER_SUPPLY_PROP_##prop, val)
@@ -22,8 +22,15 @@ static DEFINE_MUTEX(apm_mutex);
#define MPSY_PROP(prop, val) _MPSY_PROP(POWER_SUPPLY_PROP_##prop, val)
+static DEFINE_MUTEX(apm_mutex);
static struct power_supply *main_battery;
+enum apm_source {
+ SOURCE_ENERGY,
+ SOURCE_CHARGE,
+ SOURCE_VOLTAGE,
+};
+
struct find_bat_param {
struct power_supply *main;
struct power_supply *bat;
@@ -107,7 +114,7 @@ static void find_main_battery(void)
}
}
-static int calculate_time(int status, int using_charge)
+static int do_calculate_time(int status, enum apm_source source)
{
union power_supply_propval full;
union power_supply_propval empty;
@@ -126,20 +133,37 @@ static int calculate_time(int status, int using_charge)
return -1;
}
- if (using_charge) {
+ if (!I.intval)
+ return 0;
+
+ switch (source) {
+ case SOURCE_CHARGE:
full_prop = POWER_SUPPLY_PROP_CHARGE_FULL;
full_design_prop = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN;
empty_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
cur_avg_prop = POWER_SUPPLY_PROP_CHARGE_AVG;
cur_now_prop = POWER_SUPPLY_PROP_CHARGE_NOW;
- } else {
+ break;
+ case SOURCE_ENERGY:
full_prop = POWER_SUPPLY_PROP_ENERGY_FULL;
full_design_prop = POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN;
empty_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY;
empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
cur_avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG;
cur_now_prop = POWER_SUPPLY_PROP_ENERGY_NOW;
+ break;
+ case SOURCE_VOLTAGE:
+ full_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX;
+ full_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN;
+ empty_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN;
+ empty_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN;
+ cur_avg_prop = POWER_SUPPLY_PROP_VOLTAGE_AVG;
+ cur_now_prop = POWER_SUPPLY_PROP_VOLTAGE_NOW;
+ break;
+ default:
+ printk(KERN_ERR "Unsupported source: %d\n", source);
+ return -1;
}
if (_MPSY_PROP(full_prop, &full)) {
@@ -166,7 +190,26 @@ static int calculate_time(int status, int using_charge)
return -((cur.intval - empty.intval) * 60L) / I.intval;
}
-static int calculate_capacity(int using_charge)
+static int calculate_time(int status)
+{
+ int time;
+
+ time = do_calculate_time(status, SOURCE_ENERGY);
+ if (time != -1)
+ return time;
+
+ time = do_calculate_time(status, SOURCE_CHARGE);
+ if (time != -1)
+ return time;
+
+ time = do_calculate_time(status, SOURCE_VOLTAGE);
+ if (time != -1)
+ return time;
+
+ return -1;
+}
+
+static int calculate_capacity(enum apm_source source)
{
enum power_supply_property full_prop, empty_prop;
enum power_supply_property full_design_prop, empty_design_prop;
@@ -174,20 +217,33 @@ static int calculate_capacity(int using_charge)
union power_supply_propval empty, full, cur;
int ret;
- if (using_charge) {
+ switch (source) {
+ case SOURCE_CHARGE:
full_prop = POWER_SUPPLY_PROP_CHARGE_FULL;
empty_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
full_design_prop = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN;
empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN;
now_prop = POWER_SUPPLY_PROP_CHARGE_NOW;
avg_prop = POWER_SUPPLY_PROP_CHARGE_AVG;
- } else {
+ break;
+ case SOURCE_ENERGY:
full_prop = POWER_SUPPLY_PROP_ENERGY_FULL;
empty_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY;
full_design_prop = POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN;
empty_design_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN;
now_prop = POWER_SUPPLY_PROP_ENERGY_NOW;
avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG;
+ case SOURCE_VOLTAGE:
+ full_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX;
+ empty_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN;
+ full_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN;
+ empty_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN;
+ now_prop = POWER_SUPPLY_PROP_VOLTAGE_NOW;
+ avg_prop = POWER_SUPPLY_PROP_VOLTAGE_AVG;
+ break;
+ default:
+ printk(KERN_ERR "Unsupported source: %d\n", source);
+ return -1;
}
if (_MPSY_PROP(full_prop, &full)) {
@@ -254,10 +310,12 @@ static void apm_battery_apm_get_power_status(struct apm_power_info *info)
info->battery_life = capacity.intval;
} else {
/* try calculate using energy */
- info->battery_life = calculate_capacity(0);
+ info->battery_life = calculate_capacity(SOURCE_ENERGY);
/* if failed try calculate using charge instead */
if (info->battery_life == -1)
- info->battery_life = calculate_capacity(1);
+ info->battery_life = calculate_capacity(SOURCE_CHARGE);
+ if (info->battery_life == -1)
+ info->battery_life = calculate_capacity(SOURCE_VOLTAGE);
}
/* charging status */
@@ -280,22 +338,16 @@ static void apm_battery_apm_get_power_status(struct apm_power_info *info)
if (status.intval == POWER_SUPPLY_STATUS_CHARGING) {
if (!MPSY_PROP(TIME_TO_FULL_AVG, &time_to_full) ||
- !MPSY_PROP(TIME_TO_FULL_NOW, &time_to_full)) {
+ !MPSY_PROP(TIME_TO_FULL_NOW, &time_to_full))
info->time = time_to_full.intval / 60;
- } else {
- info->time = calculate_time(status.intval, 0);
- if (info->time == -1)
- info->time = calculate_time(status.intval, 1);
- }
+ else
+ info->time = calculate_time(status.intval);
} else {
if (!MPSY_PROP(TIME_TO_EMPTY_AVG, &time_to_empty) ||
- !MPSY_PROP(TIME_TO_EMPTY_NOW, &time_to_empty)) {
+ !MPSY_PROP(TIME_TO_EMPTY_NOW, &time_to_empty))
info->time = time_to_empty.intval / 60;
- } else {
- info->time = calculate_time(status.intval, 0);
- if (info->time == -1)
- info->time = calculate_time(status.intval, 1);
- }
+ else
+ info->time = calculate_time(status.intval);
}
mutex_unlock(&apm_mutex);
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index c998e68..af7a231 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -226,14 +226,6 @@ static int olpc_bat_get_property(struct power_supply *psy,
return ret;
val->intval = ec_byte;
break;
- case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
- if (ec_byte & BAT_STAT_FULL)
- val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
- else if (ec_byte & BAT_STAT_LOW)
- val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
- else
- val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
- break;
case POWER_SUPPLY_PROP_TEMP:
ret = olpc_ec_cmd(EC_BAT_TEMP, NULL, 0, (void *)&ec_word, 2);
if (ret)
@@ -265,7 +257,6 @@ static enum power_supply_property olpc_bat_props[] = {
POWER_SUPPLY_PROP_VOLTAGE_AVG,
POWER_SUPPLY_PROP_CURRENT_AVG,
POWER_SUPPLY_PROP_CAPACITY,
- POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TEMP_AMBIENT,
POWER_SUPPLY_PROP_MANUFACTURER,
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
index c058f28..c8aa55b 100644
--- a/drivers/power/pda_power.c
+++ b/drivers/power/pda_power.c
@@ -32,6 +32,18 @@ static struct pda_power_pdata *pdata;
static struct resource *ac_irq, *usb_irq;
static struct timer_list charger_timer;
static struct timer_list supply_timer;
+static struct timer_list polling_timer;
+static int polling;
+
+enum {
+ PDA_PSY_OFFLINE = 0,
+ PDA_PSY_ONLINE = 1,
+ PDA_PSY_TO_CHANGE,
+};
+static int new_ac_status = -1;
+static int new_usb_status = -1;
+static int ac_status = -1;
+static int usb_status = -1;
static int pda_power_get_property(struct power_supply *psy,
enum power_supply_property psp,
@@ -61,36 +73,44 @@ static char *pda_power_supplied_to[] = {
"backup-battery",
};
-static struct power_supply pda_power_supplies[] = {
- {
- .name = "ac",
- .type = POWER_SUPPLY_TYPE_MAINS,
- .supplied_to = pda_power_supplied_to,
- .num_supplicants = ARRAY_SIZE(pda_power_supplied_to),
- .properties = pda_power_props,
- .num_properties = ARRAY_SIZE(pda_power_props),
- .get_property = pda_power_get_property,
- },
- {
- .name = "usb",
- .type = POWER_SUPPLY_TYPE_USB,
- .supplied_to = pda_power_supplied_to,
- .num_supplicants = ARRAY_SIZE(pda_power_supplied_to),
- .properties = pda_power_props,
- .num_properties = ARRAY_SIZE(pda_power_props),
- .get_property = pda_power_get_property,
- },
+static struct power_supply pda_psy_ac = {
+ .name = "ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .supplied_to = pda_power_supplied_to,
+ .num_supplicants = ARRAY_SIZE(pda_power_supplied_to),
+ .properties = pda_power_props,
+ .num_properties = ARRAY_SIZE(pda_power_props),
+ .get_property = pda_power_get_property,
};
+static struct power_supply pda_psy_usb = {
+ .name = "usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .supplied_to = pda_power_supplied_to,
+ .num_supplicants = ARRAY_SIZE(pda_power_supplied_to),
+ .properties = pda_power_props,
+ .num_properties = ARRAY_SIZE(pda_power_props),
+ .get_property = pda_power_get_property,
+};
+
+static void update_status(void)
+{
+ if (pdata->is_ac_online)
+ new_ac_status = !!pdata->is_ac_online();
+
+ if (pdata->is_usb_online)
+ new_usb_status = !!pdata->is_usb_online();
+}
+
static void update_charger(void)
{
if (!pdata->set_charge)
return;
- if (pdata->is_ac_online && pdata->is_ac_online()) {
+ if (new_ac_status > 0) {
dev_dbg(dev, "charger on (AC)\n");
pdata->set_charge(PDA_POWER_CHARGE_AC);
- } else if (pdata->is_usb_online && pdata->is_usb_online()) {
+ } else if (new_usb_status > 0) {
dev_dbg(dev, "charger on (USB)\n");
pdata->set_charge(PDA_POWER_CHARGE_USB);
} else {
@@ -99,34 +119,81 @@ static void update_charger(void)
}
}
-static void supply_timer_func(unsigned long power_supply_ptr)
+static void supply_timer_func(unsigned long unused)
{
- void *power_supply = (void *)power_supply_ptr;
+ if (ac_status == PDA_PSY_TO_CHANGE) {
+ ac_status = new_ac_status;
+ power_supply_changed(&pda_psy_ac);
+ }
- power_supply_changed(power_supply);
+ if (usb_status == PDA_PSY_TO_CHANGE) {
+ usb_status = new_usb_status;
+ power_supply_changed(&pda_psy_usb);
+ }
}
-static void charger_timer_func(unsigned long power_supply_ptr)
+static void psy_changed(void)
{
update_charger();
- /* Okay, charger set. Now wait a bit before notifying supplicants,
- * charge power should stabilize. */
- supply_timer.data = power_supply_ptr;
+ /*
+ * Okay, charger set. Now wait a bit before notifying supplicants,
+ * charge power should stabilize.
+ */
mod_timer(&supply_timer,
jiffies + msecs_to_jiffies(pdata->wait_for_charger));
}
+static void charger_timer_func(unsigned long unused)
+{
+ update_status();
+ psy_changed();
+}
+
static irqreturn_t power_changed_isr(int irq, void *power_supply)
{
- /* Wait a bit before reading ac/usb line status and setting charger,
- * because ac/usb status readings may lag from irq. */
- charger_timer.data = (unsigned long)power_supply;
+ if (power_supply == &pda_psy_ac)
+ ac_status = PDA_PSY_TO_CHANGE;
+ else if (power_supply == &pda_psy_usb)
+ usb_status = PDA_PSY_TO_CHANGE;
+ else
+ return IRQ_NONE;
+
+ /*
+ * Wait a bit before reading ac/usb line status and setting charger,
+ * because ac/usb status readings may lag from irq.
+ */
mod_timer(&charger_timer,
jiffies + msecs_to_jiffies(pdata->wait_for_status));
+
return IRQ_HANDLED;
}
+static void polling_timer_func(unsigned long unused)
+{
+ int changed = 0;
+
+ dev_dbg(dev, "polling...\n");
+
+ update_status();
+
+ if (!ac_irq && new_ac_status != ac_status) {
+ ac_status = PDA_PSY_TO_CHANGE;
+ changed = 1;
+ }
+
+ if (!usb_irq && new_usb_status != usb_status) {
+ usb_status = PDA_PSY_TO_CHANGE;
+ changed = 1;
+ }
+
+ if (changed)
+ psy_changed();
+
+ mod_timer(&polling_timer,
+ jiffies + msecs_to_jiffies(pdata->polling_interval));
+}
+
static int pda_power_probe(struct platform_device *pdev)
{
int ret = 0;
@@ -142,6 +209,7 @@ static int pda_power_probe(struct platform_device *pdev)
pdata = pdev->dev.platform_data;
+ update_status();
update_charger();
if (!pdata->wait_for_status)
@@ -150,86 +218,138 @@ static int pda_power_probe(struct platform_device *pdev)
if (!pdata->wait_for_charger)
pdata->wait_for_charger = 500;
+ if (!pdata->polling_interval)
+ pdata->polling_interval = 2000;
+
setup_timer(&charger_timer, charger_timer_func, 0);
setup_timer(&supply_timer, supply_timer_func, 0);
ac_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ac");
usb_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "usb");
- if (!ac_irq && !usb_irq) {
- dev_err(dev, "no ac/usb irq specified\n");
- ret = -ENODEV;
- goto noirqs;
- }
if (pdata->supplied_to) {
- pda_power_supplies[0].supplied_to = pdata->supplied_to;
- pda_power_supplies[1].supplied_to = pdata->supplied_to;
- pda_power_supplies[0].num_supplicants = pdata->num_supplicants;
- pda_power_supplies[1].num_supplicants = pdata->num_supplicants;
+ pda_psy_ac.supplied_to = pdata->supplied_to;
+ pda_psy_ac.num_supplicants = pdata->num_supplicants;
+ pda_psy_usb.supplied_to = pdata->supplied_to;
+ pda_psy_usb.num_supplicants = pdata->num_supplicants;
}
- ret = power_supply_register(&pdev->dev, &pda_power_supplies[0]);
- if (ret) {
- dev_err(dev, "failed to register %s power supply\n",
- pda_power_supplies[0].name);
- goto supply0_failed;
- }
+ if (pdata->is_ac_online) {
+ ret = power_supply_register(&pdev->dev, &pda_psy_ac);
+ if (ret) {
+ dev_err(dev, "failed to register %s power supply\n",
+ pda_psy_ac.name);
+ goto ac_supply_failed;
+ }
- ret = power_supply_register(&pdev->dev, &pda_power_supplies[1]);
- if (ret) {
- dev_err(dev, "failed to register %s power supply\n",
- pda_power_supplies[1].name);
- goto supply1_failed;
+ if (ac_irq) {
+ ret = request_irq(ac_irq->start, power_changed_isr,
+ get_irq_flags(ac_irq), ac_irq->name,
+ &pda_psy_ac);
+ if (ret) {
+ dev_err(dev, "request ac irq failed\n");
+ goto ac_irq_failed;
+ }
+ } else {
+ polling = 1;
+ }
}
- if (ac_irq) {
- ret = request_irq(ac_irq->start, power_changed_isr,
- get_irq_flags(ac_irq), ac_irq->name,
- &pda_power_supplies[0]);
+ if (pdata->is_usb_online) {
+ ret = power_supply_register(&pdev->dev, &pda_psy_usb);
if (ret) {
- dev_err(dev, "request ac irq failed\n");
- goto ac_irq_failed;
+ dev_err(dev, "failed to register %s power supply\n",
+ pda_psy_usb.name);
+ goto usb_supply_failed;
}
- }
- if (usb_irq) {
- ret = request_irq(usb_irq->start, power_changed_isr,
- get_irq_flags(usb_irq), usb_irq->name,
- &pda_power_supplies[1]);
- if (ret) {
- dev_err(dev, "request usb irq failed\n");
- goto usb_irq_failed;
+ if (usb_irq) {
+ ret = request_irq(usb_irq->start, power_changed_isr,
+ get_irq_flags(usb_irq),
+ usb_irq->name, &pda_psy_usb);
+ if (ret) {
+ dev_err(dev, "request usb irq failed\n");
+ goto usb_irq_failed;
+ }
+ } else {
+ polling = 1;
}
}
- goto success;
+ if (polling) {
+ dev_dbg(dev, "will poll for status\n");
+ setup_timer(&polling_timer, polling_timer_func, 0);
+ mod_timer(&polling_timer,
+ jiffies + msecs_to_jiffies(pdata->polling_interval));
+ }
+
+ if (ac_irq || usb_irq)
+ device_init_wakeup(&pdev->dev, 1);
+
+ return 0;
usb_irq_failed:
- if (ac_irq)
- free_irq(ac_irq->start, &pda_power_supplies[0]);
+ if (pdata->is_usb_online)
+ power_supply_unregister(&pda_psy_usb);
+usb_supply_failed:
+ if (pdata->is_ac_online && ac_irq)
+ free_irq(ac_irq->start, &pda_psy_ac);
ac_irq_failed:
- power_supply_unregister(&pda_power_supplies[1]);
-supply1_failed:
- power_supply_unregister(&pda_power_supplies[0]);
-supply0_failed:
-noirqs:
+ if (pdata->is_ac_online)
+ power_supply_unregister(&pda_psy_ac);
+ac_supply_failed:
wrongid:
-success:
return ret;
}
static int pda_power_remove(struct platform_device *pdev)
{
- if (usb_irq)
- free_irq(usb_irq->start, &pda_power_supplies[1]);
- if (ac_irq)
- free_irq(ac_irq->start, &pda_power_supplies[0]);
+ if (pdata->is_usb_online && usb_irq)
+ free_irq(usb_irq->start, &pda_psy_usb);
+ if (pdata->is_ac_online && ac_irq)
+ free_irq(ac_irq->start, &pda_psy_ac);
+
+ if (polling)
+ del_timer_sync(&polling_timer);
del_timer_sync(&charger_timer);
del_timer_sync(&supply_timer);
- power_supply_unregister(&pda_power_supplies[1]);
- power_supply_unregister(&pda_power_supplies[0]);
+
+ if (pdata->is_usb_online)
+ power_supply_unregister(&pda_psy_usb);
+ if (pdata->is_ac_online)
+ power_supply_unregister(&pda_psy_ac);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int pda_power_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ if (device_may_wakeup(&pdev->dev)) {
+ if (ac_irq)
+ enable_irq_wake(ac_irq->start);
+ if (usb_irq)
+ enable_irq_wake(usb_irq->start);
+ }
+
+ return 0;
+}
+
+static int pda_power_resume(struct platform_device *pdev)
+{
+ if (device_may_wakeup(&pdev->dev)) {
+ if (usb_irq)
+ disable_irq_wake(usb_irq->start);
+ if (ac_irq)
+ disable_irq_wake(ac_irq->start);
+ }
+
return 0;
}
+#else
+#define pda_power_suspend NULL
+#define pda_power_resume NULL
+#endif /* CONFIG_PM */
static struct platform_driver pda_power_pdrv = {
.driver = {
@@ -237,6 +357,8 @@ static struct platform_driver pda_power_pdrv = {
},
.probe = pda_power_probe,
.remove = pda_power_remove,
+ .suspend = pda_power_suspend,
+ .resume = pda_power_resume,
};
static int __init pda_power_init(void)
diff --git a/drivers/power/power_supply_leds.c b/drivers/power/power_supply_leds.c
index 7f8f359..fa3034f 100644
--- a/drivers/power/power_supply_leds.c
+++ b/drivers/power/power_supply_leds.c
@@ -10,8 +10,11 @@
* You may use this code as per GPL version 2
*/
+#include <linux/kernel.h>
#include <linux/power_supply.h>
+#include "power_supply.h"
+
/* Battery specific LEDs triggers. */
static void power_supply_update_bat_leds(struct power_supply *psy)
@@ -46,28 +49,20 @@ static int power_supply_create_bat_triggers(struct power_supply *psy)
{
int rc = 0;
- psy->charging_full_trig_name = kmalloc(strlen(psy->name) +
- sizeof("-charging-or-full"), GFP_KERNEL);
+ psy->charging_full_trig_name = kasprintf(GFP_KERNEL,
+ "%s-charging-or-full", psy->name);
if (!psy->charging_full_trig_name)
goto charging_full_failed;
- psy->charging_trig_name = kmalloc(strlen(psy->name) +
- sizeof("-charging"), GFP_KERNEL);
+ psy->charging_trig_name = kasprintf(GFP_KERNEL,
+ "%s-charging", psy->name);
if (!psy->charging_trig_name)
goto charging_failed;
- psy->full_trig_name = kmalloc(strlen(psy->name) +
- sizeof("-full"), GFP_KERNEL);
+ psy->full_trig_name = kasprintf(GFP_KERNEL, "%s-full", psy->name);
if (!psy->full_trig_name)
goto full_failed;
- strcpy(psy->charging_full_trig_name, psy->name);
- strcat(psy->charging_full_trig_name, "-charging-or-full");
- strcpy(psy->charging_trig_name, psy->name);
- strcat(psy->charging_trig_name, "-charging");
- strcpy(psy->full_trig_name, psy->name);
- strcat(psy->full_trig_name, "-full");
-
led_trigger_register_simple(psy->charging_full_trig_name,
&psy->charging_full_trig);
led_trigger_register_simple(psy->charging_trig_name,
@@ -118,14 +113,10 @@ static int power_supply_create_gen_triggers(struct power_supply *psy)
{
int rc = 0;
- psy->online_trig_name = kmalloc(strlen(psy->name) + sizeof("-online"),
- GFP_KERNEL);
+ psy->online_trig_name = kasprintf(GFP_KERNEL, "%s-online", psy->name);
if (!psy->online_trig_name)
goto online_failed;
- strcpy(psy->online_trig_name, psy->name);
- strcat(psy->online_trig_name, "-online");
-
led_trigger_register_simple(psy->online_trig_name, &psy->online_trig);
goto success;
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 249f61b..d482484 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -14,6 +14,8 @@
#include <linux/ctype.h>
#include <linux/power_supply.h>
+#include "power_supply.h"
+
/*
* This is because the name "current" breaks the device attr macro.
* The "current" word resolves to "(get_current())" so instead of
@@ -46,10 +48,8 @@ static ssize_t power_supply_show_property(struct device *dev,
"Unspecified failure"
};
static char *technology_text[] = {
- "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd"
- };
- static char *capacity_level_text[] = {
- "Unknown", "Critical", "Low", "Normal", "High", "Full"
+ "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd",
+ "LiMn"
};
ssize_t ret;
struct power_supply *psy = dev_get_drvdata(dev);
@@ -71,9 +71,6 @@ static ssize_t power_supply_show_property(struct device *dev,
return sprintf(buf, "%s\n", health_text[value.intval]);
else if (off == POWER_SUPPLY_PROP_TECHNOLOGY)
return sprintf(buf, "%s\n", technology_text[value.intval]);
- else if (off == POWER_SUPPLY_PROP_CAPACITY_LEVEL)
- return sprintf(buf, "%s\n",
- capacity_level_text[value.intval]);
else if (off >= POWER_SUPPLY_PROP_MODEL_NAME)
return sprintf(buf, "%s\n", value.strval);
@@ -88,6 +85,8 @@ static struct device_attribute power_supply_attrs[] = {
POWER_SUPPLY_ATTR(present),
POWER_SUPPLY_ATTR(online),
POWER_SUPPLY_ATTR(technology),
+ POWER_SUPPLY_ATTR(voltage_max),
+ POWER_SUPPLY_ATTR(voltage_min),
POWER_SUPPLY_ATTR(voltage_max_design),
POWER_SUPPLY_ATTR(voltage_min_design),
POWER_SUPPLY_ATTR(voltage_now),
@@ -159,8 +158,7 @@ dynamics_failed:
&power_supply_attrs[psy->properties[j]]);
statics_failed:
while (i--)
- device_remove_file(psy->dev,
- &power_supply_static_attrs[psy->properties[i]]);
+ device_remove_file(psy->dev, &power_supply_static_attrs[i]);
succeed:
return rc;
}
@@ -170,8 +168,7 @@ void power_supply_remove_attrs(struct power_supply *psy)
int i;
for (i = 0; i < ARRAY_SIZE(power_supply_static_attrs); i++)
- device_remove_file(psy->dev,
- &power_supply_static_attrs[i]);
+ device_remove_file(psy->dev, &power_supply_static_attrs[i]);
for (i = 0; i < psy->num_properties; i++)
device_remove_file(psy->dev,
diff --git a/include/linux/pda_power.h b/include/linux/pda_power.h
index 1375f15..225beb1 100644
--- a/include/linux/pda_power.h
+++ b/include/linux/pda_power.h
@@ -26,6 +26,7 @@ struct pda_power_pdata {
unsigned int wait_for_status; /* msecs, default is 500 */
unsigned int wait_for_charger; /* msecs, default is 500 */
+ unsigned int polling_interval; /* msecs, default is 2000 */
};
#endif /* __PDA_POWER_H__ */
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index 606c095..5cbf3e3 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -54,15 +54,7 @@ enum {
POWER_SUPPLY_TECHNOLOGY_LIPO,
POWER_SUPPLY_TECHNOLOGY_LiFe,
POWER_SUPPLY_TECHNOLOGY_NiCd,
-};
-
-enum {
- POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN = 0,
- POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL,
- POWER_SUPPLY_CAPACITY_LEVEL_LOW,
- POWER_SUPPLY_CAPACITY_LEVEL_NORMAL,
- POWER_SUPPLY_CAPACITY_LEVEL_HIGH,
- POWER_SUPPLY_CAPACITY_LEVEL_FULL,
+ POWER_SUPPLY_TECHNOLOGY_LiMn,
};
enum power_supply_property {
@@ -72,6 +64,8 @@ enum power_supply_property {
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN,
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -91,7 +85,6 @@ enum power_supply_property {
POWER_SUPPLY_PROP_ENERGY_NOW,
POWER_SUPPLY_PROP_ENERGY_AVG,
POWER_SUPPLY_PROP_CAPACITY, /* in percents! */
- POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TEMP_AMBIENT,
POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
OpenPOWER on IntegriCloud