diff options
| -rw-r--r-- | include/sound/pxa2xx-lib.h | 20 | ||||
| -rw-r--r-- | sound/arm/Kconfig | 5 | ||||
| -rw-r--r-- | sound/arm/Makefile | 3 | ||||
| -rw-r--r-- | sound/arm/pxa2xx-ac97-lib.c | 325 | ||||
| -rw-r--r-- | sound/arm/pxa2xx-ac97.c | 247 | ||||
| -rw-r--r-- | sound/soc/pxa/Kconfig | 2 | ||||
| -rw-r--r-- | sound/soc/pxa/pxa2xx-ac97.c | 272 |
7 files changed, 382 insertions, 492 deletions
diff --git a/include/sound/pxa2xx-lib.h b/include/sound/pxa2xx-lib.h new file mode 100644 index 0000000..d18dd2d --- /dev/null +++ b/include/sound/pxa2xx-lib.h @@ -0,0 +1,20 @@ +#ifndef PXA2XX_LIB_H +#define PXA2XX_LIB_H + +#include <linux/platform_device.h> +#include <sound/ac97_codec.h> + +extern unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg); +extern void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val); + +extern bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97); +extern bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97); +extern void pxa2xx_ac97_finish_reset(struct snd_ac97 *ac97); + +extern int pxa2xx_ac97_hw_suspend(void); +extern int pxa2xx_ac97_hw_resume(void); + +extern int pxa2xx_ac97_hw_probe(struct platform_device *dev); +extern void pxa2xx_ac97_hw_remove(struct platform_device *dev); + +#endif diff --git a/sound/arm/Kconfig b/sound/arm/Kconfig index 351e19e..2e55481 100644 --- a/sound/arm/Kconfig +++ b/sound/arm/Kconfig @@ -32,11 +32,16 @@ config SND_PXA2XX_PCM tristate select SND_PCM +config SND_PXA2XX_LIB + tristate + select SND_AC97_CODEC + config SND_PXA2XX_AC97 tristate "AC97 driver for the Intel PXA2xx chip" depends on ARCH_PXA select SND_PXA2XX_PCM select SND_AC97_CODEC + select SND_PXA2XX_LIB help Say Y or M if you want to support any AC97 codec attached to the PXA2xx AC97 interface. diff --git a/sound/arm/Makefile b/sound/arm/Makefile index 4ef6dd0..bb2ed88 100644 --- a/sound/arm/Makefile +++ b/sound/arm/Makefile @@ -11,5 +11,8 @@ snd-aaci-objs := aaci.o devdma.o obj-$(CONFIG_SND_PXA2XX_PCM) += snd-pxa2xx-pcm.o snd-pxa2xx-pcm-objs := pxa2xx-pcm.o +obj-$(CONFIG_SND_PXA2XX_LIB) += snd-pxa2xx-lib.o +snd-pxa2xx-lib-objs := pxa2xx-ac97-lib.o + obj-$(CONFIG_SND_PXA2XX_AC97) += snd-pxa2xx-ac97.o snd-pxa2xx-ac97-objs := pxa2xx-ac97.o diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c new file mode 100644 index 0000000..95f8ead --- /dev/null +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -0,0 +1,325 @@ +/* + * Based on sound/arm/pxa2xx-ac97.c and sound/soc/pxa/pxa2xx-ac97.c + * which contain: + * + * Author: Nicolas Pitre + * Created: Dec 02, 2004 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/clk.h> +#include <linux/delay.h> + +#include <sound/ac97_codec.h> +#include <sound/pxa2xx-lib.h> + +#include <asm/irq.h> +#include <mach/hardware.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-gpio.h> +#include <mach/audio.h> + +static DEFINE_MUTEX(car_mutex); +static DECLARE_WAIT_QUEUE_HEAD(gsr_wq); +static volatile long gsr_bits; +static struct clk *ac97_clk; +#ifdef CONFIG_PXA27x +static struct clk *ac97conf_clk; +#endif + +/* + * Beware PXA27x bugs: + * + * o Slot 12 read from modem space will hang controller. + * o CDONE, SDONE interrupt fails after any slot 12 IO. + * + * We therefore have an hybrid approach for waiting on SDONE (interrupt or + * 1 jiffy timeout if interrupt never comes). + */ + +unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg) +{ + unsigned short val = -1; + volatile u32 *reg_addr; + + mutex_lock(&car_mutex); + + /* set up primary or secondary codec space */ +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) + reg_addr = (ac97->num & 1) ? &SAC_REG_BASE : &PAC_REG_BASE; +#else + if (reg == AC97_GPIO_STATUS) + reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE; + else + reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; +#endif + reg_addr += (reg >> 1); + + /* start read access across the ac97 link */ + GSR = GSR_CDONE | GSR_SDONE; + gsr_bits = 0; + val = *reg_addr; + if (reg == AC97_GPIO_STATUS) + goto out; + if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1) <= 0 && + !((GSR | gsr_bits) & GSR_SDONE)) { + printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n", + __func__, reg, GSR | gsr_bits); + val = -1; + goto out; + } + + /* valid data now */ + GSR = GSR_CDONE | GSR_SDONE; + gsr_bits = 0; + val = *reg_addr; + /* but we've just started another cycle... */ + wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1); + +out: mutex_unlock(&car_mutex); + return val; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_read); + +void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, + unsigned short val) +{ + volatile u32 *reg_addr; + + mutex_lock(&car_mutex); + + /* set up primary or secondary codec space */ +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) + reg_addr = (ac97->num & 1) ? &SAC_REG_BASE : &PAC_REG_BASE; +#else + if (reg == AC97_GPIO_STATUS) + reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE; + else + reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; +#endif + reg_addr += (reg >> 1); + + GSR = GSR_CDONE | GSR_SDONE; + gsr_bits = 0; + *reg_addr = val; + if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1) <= 0 && + !((GSR | gsr_bits) & GSR_CDONE)) + printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n", + __func__, reg, GSR | gsr_bits); + + mutex_unlock(&car_mutex); +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_write); + +bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97) +{ +#ifdef CONFIG_PXA3xx + int timeout = 100; +#endif + gsr_bits = 0; + +#ifdef CONFIG_PXA27x + /* warm reset broken on Bulverde, + so manually keep AC97 reset high */ + pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH); + udelay(10); + GCR |= GCR_WARM_RST; + pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); + udelay(500); +#elif defined(CONFIG_PXA3xx) + /* Can't use interrupts */ + GCR |= GCR_WARM_RST; + while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) + mdelay(1); +#else + GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN; + wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); +#endif + + if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR))) { + printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n", + __func__, gsr_bits); + + return false; + } + + return true; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset); + +bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97) +{ +#ifdef CONFIG_PXA3xx + int timeout = 1000; + + /* Hold CLKBPB for 100us */ + GCR = 0; + GCR = GCR_CLKBPB; + udelay(100); + GCR = 0; +#endif + + GCR &= GCR_COLD_RST; /* clear everything but nCRST */ + GCR &= ~GCR_COLD_RST; /* then assert nCRST */ + + gsr_bits = 0; +#ifdef CONFIG_PXA27x + /* PXA27x Developers Manual section 13.5.2.2.1 */ + clk_enable(ac97conf_clk); + udelay(5); + clk_disable(ac97conf_clk); + GCR = GCR_COLD_RST; + udelay(50); +#elif defined(CONFIG_PXA3xx) + /* Can't use interrupts on PXA3xx */ + GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); + + GCR = GCR_WARM_RST | GCR_COLD_RST; + while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--) + mdelay(10); +#else + GCR = GCR_COLD_RST; + GCR |= GCR_CDONE_IE|GCR_SDONE_IE; + wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); +#endif + + if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR))) { + printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n", + __func__, gsr_bits); + + return false; + } + + return true; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_cold_reset); + + +void pxa2xx_ac97_finish_reset(struct snd_ac97 *ac97) +{ + GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); + GCR |= GCR_SDONE_IE|GCR_CDONE_IE; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_finish_reset); + +static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id) +{ + long status; + + status = GSR; + if (status) { + GSR = status; + gsr_bits |= status; + wake_up(&gsr_wq); + +#ifdef CONFIG_PXA27x + /* Although we don't use those we still need to clear them + since they tend to spuriously trigger when MMC is used + (hardware bug? go figure)... */ + MISR = MISR_EOC; + PISR = PISR_EOC; + MCSR = MCSR_EOC; +#endif + + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +#ifdef CONFIG_PM +int pxa2xx_ac97_hw_suspend(void) +{ + GCR |= GCR_ACLINK_OFF; + clk_disable(ac97_clk); + return 0; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_suspend); + +int pxa2xx_ac97_hw_resume(void) +{ + pxa_gpio_mode(GPIO31_SYNC_AC97_MD); + pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); + pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); + pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); +#ifdef CONFIG_PXA27x + /* Use GPIO 113 as AC97 Reset on Bulverde */ + pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); +#endif + clk_enable(ac97_clk); + return 0; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume); +#endif + +int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev) +{ + int ret; + + ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, 0, "AC97", NULL); + if (ret < 0) + goto err; + + pxa_gpio_mode(GPIO31_SYNC_AC97_MD); + pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); + pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); + pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); +#ifdef CONFIG_PXA27x + /* Use GPIO 113 as AC97 Reset on Bulverde */ + pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); + ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK"); + if (IS_ERR(ac97conf_clk)) { + ret = PTR_ERR(ac97conf_clk); + ac97conf_clk = NULL; + goto err_irq; + } +#endif + + ac97_clk = clk_get(&dev->dev, "AC97CLK"); + if (IS_ERR(ac97_clk)) { + ret = PTR_ERR(ac97_clk); + ac97_clk = NULL; + goto err_irq; + } + + return clk_enable(ac97_clk); + +err_irq: + GCR |= GCR_ACLINK_OFF; +#ifdef CONFIG_PXA27x + if (ac97conf_clk) { + clk_put(ac97conf_clk); + ac97conf_clk = NULL; + } +#endif + free_irq(IRQ_AC97, NULL); +err: + return ret; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_probe); + +void pxa2xx_ac97_hw_remove(struct platform_device *dev) +{ + GCR |= GCR_ACLINK_OFF; + free_irq(IRQ_AC97, NULL); +#ifdef CONFIG_PXA27x + clk_put(ac97conf_clk); + ac97conf_clk = NULL; +#endif + clk_disable(ac97_clk); + clk_put(ac97_clk); + ac97_clk = NULL; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_remove); + +MODULE_AUTHOR("Nicolas Pitre"); +MODULE_DESCRIPTION("Intel/Marvell PXA sound library"); +MODULE_LICENSE("GPL"); + diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 199cca3..cba71d8 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -12,198 +12,27 @@ #include <linux/init.h> #include <linux/module.h> -#include <linux/kernel.h> #include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/wait.h> -#include <linux/clk.h> -#include <linux/delay.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/ac97_codec.h> #include <sound/initval.h> +#include <sound/pxa2xx-lib.h> -#include <asm/irq.h> -#include <linux/mutex.h> #include <mach/hardware.h> #include <mach/pxa-regs.h> -#include <mach/pxa2xx-gpio.h> #include <mach/audio.h> #include "pxa2xx-pcm.h" - -static DEFINE_MUTEX(car_mutex); -static DECLARE_WAIT_QUEUE_HEAD(gsr_wq); -static volatile long gsr_bits; -static struct clk *ac97_clk; -#ifdef CONFIG_PXA27x -static struct clk *ac97conf_clk; -#endif - -/* - * Beware PXA27x bugs: - * - * o Slot 12 read from modem space will hang controller. - * o CDONE, SDONE interrupt fails after any slot 12 IO. - * - * We therefore have an hybrid approach for waiting on SDONE (interrupt or - * 1 jiffy timeout if interrupt never comes). - */ - -static unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg) -{ - unsigned short val = -1; - volatile u32 *reg_addr; - - mutex_lock(&car_mutex); - - /* set up primary or secondary codec space */ - reg_addr = (ac97->num & 1) ? &SAC_REG_BASE : &PAC_REG_BASE; - reg_addr += (reg >> 1); - - /* start read access across the ac97 link */ - GSR = GSR_CDONE | GSR_SDONE; - gsr_bits = 0; - val = *reg_addr; - if (reg == AC97_GPIO_STATUS) - goto out; - if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1) <= 0 && - !((GSR | gsr_bits) & GSR_SDONE)) { - printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n", - __func__, reg, GSR | gsr_bits); - val = -1; - goto out; - } - - /* valid data now */ - GSR = GSR_CDONE | GSR_SDONE; - gsr_bits = 0; - val = *reg_addr; - /* but we've just started another cycle... */ - wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1); - -out: mutex_unlock(&car_mutex); - return val; -} - -static void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val) -{ - volatile u32 *reg_addr; - - mutex_lock(&car_mutex); - - /* set up primary or secondary codec space */ - reg_addr = (ac97->num & 1) ? &SAC_REG_BASE : &PAC_REG_BASE; - reg_addr += (reg >> 1); - - GSR = GSR_CDONE | GSR_SDONE; - gsr_bits = 0; - *reg_addr = val; - if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1) <= 0 && - !((GSR | gsr_bits) & GSR_CDONE)) - printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n", - __func__, reg, GSR | gsr_bits); - - mutex_unlock(&car_mutex); -} - static void pxa2xx_ac97_reset(struct snd_ac97 *ac97) { - /* First, try cold reset */ -#ifdef CONFIG_PXA3xx - int timeout; - - /* Hold CLKBPB for 100us */ - GCR = 0; - GCR = GCR_CLKBPB; - udelay(100); - GCR = 0; -#endif - - GCR &= GCR_COLD_RST; /* clear everything but nCRST */ - GCR &= ~GCR_COLD_RST; /* then assert nCRST */ - - gsr_bits = 0; -#ifdef CONFIG_PXA27x - /* PXA27x Developers Manual section 13.5.2.2.1 */ - clk_enable(ac97conf_clk); - udelay(5); - clk_disable(ac97conf_clk); - GCR = GCR_COLD_RST; - udelay(50); -#elif defined(CONFIG_PXA3xx) - timeout = 1000; - /* Can't use interrupts on PXA3xx */ - GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); - - GCR = GCR_WARM_RST | GCR_COLD_RST; - while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--) - mdelay(10); -#else - GCR = GCR_COLD_RST; - GCR |= GCR_CDONE_IE|GCR_SDONE_IE; - wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); -#endif - - if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR))) { - printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n", - __func__, gsr_bits); - - /* let's try warm reset */ - gsr_bits = 0; -#ifdef CONFIG_PXA27x - /* warm reset broken on Bulverde, - so manually keep AC97 reset high */ - pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH); - udelay(10); - GCR |= GCR_WARM_RST; - pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); - udelay(500); -#elif defined(CONFIG_PXA3xx) - timeout = 100; - /* Can't use interrupts */ - GCR |= GCR_WARM_RST; - while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) - mdelay(1); -#else - GCR |= GCR_WARM_RST|GCR_PRIRDY_IEN|GCR_SECRDY_IEN; - wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); -#endif - - if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR))) - printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n", - __func__, gsr_bits); - } - - GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); - GCR |= GCR_SDONE_IE|GCR_CDONE_IE; -} - -static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id) -{ - long status; - - status = GSR; - if (status) { - GSR = status; - gsr_bits |= status; - wake_up(&gsr_wq); - -#ifdef CONFIG_PXA27x - /* Although we don't use those we still need to clear them - since they tend to spuriously trigger when MMC is used - (hardware bug? go figure)... */ - MISR = MISR_EOC; - PISR = PISR_EOC; - MCSR = MCSR_EOC; -#endif - - return IRQ_HANDLED; + if (!pxa2xx_ac97_try_cold_reset(ac97)) { + pxa2xx_ac97_try_warm_reset(ac97); } - return IRQ_NONE; + pxa2xx_ac97_finish_reset(ac97); } static struct snd_ac97_bus_ops pxa2xx_ac97_ops = { @@ -288,17 +117,19 @@ static int pxa2xx_ac97_do_suspend(struct snd_card *card, pm_message_t state) snd_ac97_suspend(pxa2xx_ac97_ac97); if (platform_ops && platform_ops->suspend) platform_ops->suspend(platform_ops->priv); - GCR |= GCR_ACLINK_OFF; - clk_disable(ac97_clk); - return 0; + return pxa2xx_ac97_hw_suspend(); } static int pxa2xx_ac97_do_resume(struct snd_card *card) { pxa2xx_audio_ops_t *platform_ops = card->dev->platform_data; + int rc; + + rc = pxa2xx_ac97_hw_resume(); + if (rc) + return rc; - clk_enable(ac97_clk); if (platform_ops && platform_ops->resume) platform_ops->resume(platform_ops->priv); snd_ac97_resume(pxa2xx_ac97_ac97); @@ -354,40 +185,17 @@ static int __devinit pxa2xx_ac97_probe(struct platform_device *dev) if (ret) goto err; - ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, 0, "AC97", NULL); - if (ret < 0) - goto err; - - pxa_gpio_mode(GPIO31_SYNC_AC97_MD); - pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); - pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); - pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); -#ifdef CONFIG_PXA27x - /* Use GPIO 113 as AC97 Reset on Bulverde */ - pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); - ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK"); - if (IS_ERR(ac97conf_clk)) { - ret = PTR_ERR(ac97conf_clk); - ac97conf_clk = NULL; - goto err; - } -#endif - - ac97_clk = clk_get(&dev->dev, "AC97CLK"); - if (IS_ERR(ac97_clk)) { - ret = PTR_ERR(ac97_clk); - ac97_clk = NULL; + ret = pxa2xx_ac97_hw_probe(dev); + if (ret) goto err; - } - clk_enable(ac97_clk); ret = snd_ac97_bus(card, 0, &pxa2xx_ac97_ops, NULL, &ac97_bus); if (ret) - goto err; + goto err_remove; memset(&ac97_template, 0, sizeof(ac97_template)); ret = snd_ac97_mixer(ac97_bus, &ac97_template, &pxa2xx_ac97_ac97); if (ret) - goto err; + goto err_remove; snprintf(card->shortname, sizeof(card->shortname), "%s", snd_ac97_get_short_name(pxa2xx_ac97_ac97)); @@ -401,22 +209,11 @@ static int __devinit pxa2xx_ac97_probe(struct platform_device *dev) return 0; } - err: +err_remove: + pxa2xx_ac97_hw_remove(dev); +err: if (card) snd_card_free(card); - if (ac97_clk) { - GCR |= GCR_ACLINK_OFF; - free_irq(IRQ_AC97, NULL); - clk_disable(ac97_clk); - clk_put(ac97_clk); - ac97_clk = NULL; - } -#ifdef CONFIG_PXA27x - if (ac97conf_clk) { - clk_put(ac97conf_clk); - ac97conf_clk = NULL; - } -#endif return ret; } @@ -427,15 +224,7 @@ static int __devexit pxa2xx_ac97_remove(struct platform_device *dev) if (card) { snd_card_free(card); platform_set_drvdata(dev, NULL); - GCR |= GCR_ACLINK_OFF; - free_irq(IRQ_AC97, NULL); - clk_disable(ac97_clk); - clk_put(ac97_clk); - ac97_clk = NULL; -#ifdef CONFIG_PXA27x - clk_put(ac97conf_clk); - ac97conf_clk = NULL; -#endif + pxa2xx_ac97_hw_remove(dev); } return 0; diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 9212c37..d1ccbdc 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -13,6 +13,8 @@ config SND_PXA2XX_AC97 config SND_PXA2XX_SOC_AC97 tristate select AC97_BUS + select SND_ARM + select SND_PXA2XX_LIB select SND_SOC_AC97_BUS config SND_PXA2XX_SOC_I2S diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index d94a495..a80ae07 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -13,225 +13,30 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/wait.h> -#include <linux/clk.h> -#include <linux/delay.h> #include <sound/core.h> -#include <sound/pcm.h> #include <sound/ac97_codec.h> -#include <sound/initval.h> #include <sound/soc.h> +#include <sound/pxa2xx-lib.h> -#include <asm/irq.h> -#include <linux/mutex.h> #include <mach/hardware.h> #include <mach/pxa-regs.h> -#include <mach/pxa2xx-gpio.h> -#include <mach/audio.h> #include "pxa2xx-pcm.h" #include "pxa2xx-ac97.h" -static DEFINE_MUTEX(car_mutex); -static DECLARE_WAIT_QUEUE_HEAD(gsr_wq); -static volatile long gsr_bits; -static struct clk *ac97_clk; -#ifdef CONFIG_PXA27x -static struct clk *ac97conf_clk; -#endif - -/* - * Beware PXA27x bugs: - * - * o Slot 12 read from modem space will hang controller. - * o CDONE, SDONE interrupt fails after any slot 12 IO. - * - * We therefore have an hybrid approach for waiting on SDONE (interrupt or - * 1 jiffy timeout if interrupt never comes). - */ - -static unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, - unsigned short reg) -{ - unsigned short val = -1; - volatile u32 *reg_addr; - - mutex_lock(&car_mutex); - - /* set up primary or secondary codec/modem space */ -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; -#else - if (reg == AC97_GPIO_STATUS) - reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE; - else - reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; -#endif - reg_addr += (reg >> 1); - -#ifndef CONFIG_PXA27x - if (reg == AC97_GPIO_STATUS) { - /* read from controller cache */ - val = *reg_addr; - goto out; - } -#endif - - /* start read access across the ac97 link */ - GSR = GSR_CDONE | GSR_SDONE; - gsr_bits = 0; - val = *reg_addr; - - wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1); - if (!((GSR | gsr_bits) & GSR_SDONE)) { - printk(KERN_ERR "%s: read error (ac97_reg=%x GSR=%#lx)\n", - __func__, reg, GSR | gsr_bits); - val = -1; - goto out; - } - - /* valid data now */ - GSR = GSR_CDONE | GSR_SDONE; - gsr_bits = 0; - val = *reg_addr; - /* but we've just started another cycle... */ - wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1); - -out: mutex_unlock(&car_mutex); - return val; -} - -static void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, - unsigned short val) -{ - volatile u32 *reg_addr; - - mutex_lock(&car_mutex); - - /* set up primary or secondary codec/modem space */ -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; -#else - if (reg == AC97_GPIO_STATUS) - reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE; - else - reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; -#endif - reg_addr += (reg >> 1); - - GSR = GSR_CDONE | GSR_SDONE; - gsr_bits = 0; - *reg_addr = val; - wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1); - if (!((GSR | gsr_bits) & GSR_CDONE)) - printk(KERN_ERR "%s: write error (ac97_reg=%x GSR=%#lx)\n", - __func__, reg, GSR | gsr_bits); - - mutex_unlock(&car_mutex); -} - static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97) { -#ifdef CONFIG_PXA3xx - int timeout = 100; -#endif - gsr_bits = 0; - -#ifdef CONFIG_PXA27x - /* warm reset broken on Bulverde, - so manually keep AC97 reset high */ - pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH); - udelay(10); - GCR |= GCR_WARM_RST; - pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); - udelay(500); -#elif defined(CONFIG_PXA3xx) - /* Can't use interrupts */ - GCR |= GCR_WARM_RST; - while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) - mdelay(1); -#else - GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN; - wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); -#endif - - if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR))) - printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n", - __func__, gsr_bits); + pxa2xx_ac97_try_warm_reset(ac97); - GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); - GCR |= GCR_SDONE_IE|GCR_CDONE_IE; + pxa2xx_ac97_finish_reset(ac97); } static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97) { -#ifdef CONFIG_PXA3xx - int timeout = 1000; - - /* Hold CLKBPB for 100us */ - GCR = 0; - GCR = GCR_CLKBPB; - udelay(100); - GCR = 0; -#endif + pxa2xx_ac97_try_cold_reset(ac97); - GCR &= GCR_COLD_RST; /* clear everything but nCRST */ - GCR &= ~GCR_COLD_RST; /* then assert nCRST */ - - gsr_bits = 0; -#ifdef CONFIG_PXA27x - /* PXA27x Developers Manual section 13.5.2.2.1 */ - clk_enable(ac97conf_clk); - udelay(5); - clk_disable(ac97conf_clk); - GCR = GCR_COLD_RST; - udelay(50); -#elif defined(CONFIG_PXA3xx) - /* Can't use interrupts on PXA3xx */ - GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); - - GCR = GCR_WARM_RST | GCR_COLD_RST; - while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--) - mdelay(10); -#else - GCR = GCR_COLD_RST; - GCR |= GCR_CDONE_IE|GCR_SDONE_IE; - wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); -#endif - - if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR))) - printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n", - __func__, gsr_bits); - - GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN); - GCR |= GCR_SDONE_IE|GCR_CDONE_IE; -} - -static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id) -{ - long status; - - status = GSR; - if (status) { - GSR = status; - gsr_bits |= status; - wake_up(&gsr_wq); - -#ifdef CONFIG_PXA27x - /* Although we don't use those we still need to clear them - since they tend to spuriously trigger when MMC is used - (hardware bug? go figure)... */ - MISR = MISR_EOC; - PISR = PISR_EOC; - MCSR = MCSR_EOC; -#endif - - return IRQ_HANDLED; - } - - return IRQ_NONE; + pxa2xx_ac97_finish_reset(ac97); } struct snd_ac97_bus_ops soc_ac97_ops = { @@ -285,24 +90,13 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_mic_mono_in = { static int pxa2xx_ac97_suspend(struct platform_device *pdev, struct snd_soc_dai *dai) { - GCR |= GCR_ACLINK_OFF; - clk_disable(ac97_clk); - return 0; + return pxa2xx_ac97_hw_suspend(); } static int pxa2xx_ac97_resume(struct platform_device *pdev, struct snd_soc_dai *dai) { - pxa_gpio_mode(GPIO31_SYNC_AC97_MD); - pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); - pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); - pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); -#ifdef CONFIG_PXA27x - /* Use GPIO 113 as AC97 Reset on Bulverde */ - pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); -#endif - clk_enable(ac97_clk); - return 0; + return pxa2xx_ac97_hw_resume(); } #else @@ -313,61 +107,13 @@ static int pxa2xx_ac97_resume(struct platform_device *pdev, static int pxa2xx_ac97_probe(struct platform_device *pdev, struct snd_soc_dai *dai) { - int ret; - - ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL); - if (ret < 0) - goto err; - - pxa_gpio_mode(GPIO31_SYNC_AC97_MD); - pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); - pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); - pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); -#ifdef CONFIG_PXA27x - /* Use GPIO 113 as AC97 Reset on Bulverde */ - pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); - - ac97conf_clk = clk_get(&pdev->dev, "AC97CONFCLK"); - if (IS_ERR(ac97conf_clk)) { - ret = PTR_ERR(ac97conf_clk); - ac97conf_clk = NULL; - goto err_irq; - } -#endif - ac97_clk = clk_get(&pdev->dev, "AC97CLK"); - if (IS_ERR(ac97_clk)) { - ret = PTR_ERR(ac97_clk); - ac97_clk = NULL; - goto err_irq; - } - clk_enable(ac97_clk); - return 0; - - err_irq: - GCR |= GCR_ACLINK_OFF; -#ifdef CONFIG_PXA27x - if (ac97conf_clk) { - clk_put(ac97conf_clk); - ac97conf_clk = NULL; - } -#endif - free_irq(IRQ_AC97, NULL); - err: - return ret; + return pxa2xx_ac97_hw_probe(pdev); } static void pxa2xx_ac97_remove(struct platform_device *pdev, struct snd_soc_dai *dai) { - GCR |= GCR_ACLINK_OFF; - free_irq(IRQ_AC97, NULL); -#ifdef CONFIG_PXA27x - clk_put(ac97conf_clk); - ac97conf_clk = NULL; -#endif - clk_disable(ac97_clk); - clk_put(ac97_clk); - ac97_clk = NULL; + pxa2xx_ac97_hw_remove(pdev); } static int pxa2xx_ac97_hw_params(struct snd_pcm_substream *substream, |
