diff options
| -rw-r--r-- | tools/testing/ktest/ktest.pl | 206 | ||||
| -rw-r--r-- | tools/testing/ktest/sample.conf | 345 |
2 files changed, 433 insertions, 118 deletions
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index ef97817..a7e86e3 100644 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -11,21 +11,23 @@ use File::Path qw(mkpath); use File::Copy qw(cp); use FileHandle; -$#ARGV >= 0 || die "usage: autotest.pl config-file\n"; +$#ARGV >= 0 || die "usage: ktest.pl config-file\n"; $| = 1; my %opt; +my %repeat_tests; +my %repeats; my %default; #default opts -$default{"NUM_TESTS"} = 5; +$default{"NUM_TESTS"} = 1; $default{"REBOOT_TYPE"} = "grub"; $default{"TEST_TYPE"} = "test"; $default{"BUILD_TYPE"} = "randconfig"; $default{"MAKE_CMD"} = "make"; $default{"TIMEOUT"} = 120; -$default{"TMP_DIR"} = "/tmp/autotest"; +$default{"TMP_DIR"} = "/tmp/ktest"; $default{"SLEEP_TIME"} = 60; # sleep time between tests $default{"BUILD_NOCLEAN"} = 0; $default{"REBOOT_ON_ERROR"} = 0; @@ -87,29 +89,138 @@ my $target_image; my $localversion; my $iteration = 0; +sub set_value { + my ($lvalue, $rvalue) = @_; + + if (defined($opt{$lvalue})) { + die "Error: Option $lvalue defined more than once!\n"; + } + $opt{$lvalue} = $rvalue; +} + sub read_config { my ($config) = @_; open(IN, $config) || die "can't read file $config"; + my $name = $config; + $name =~ s,.*/(.*),$1,; + + my $test_num = 0; + my $default = 1; + my $repeat = 1; + my $num_tests_set = 0; + my $skip = 0; + my $rest; + while (<IN>) { # ignore blank lines and comments next if (/^\s*$/ || /\s*\#/); - if (/^\s*(\S+)\s*=\s*(.*?)\s*$/) { + if (/^\s*TEST_START(.*)/) { + + $rest = $1; + + if ($num_tests_set) { + die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n"; + } + + my $old_test_num = $test_num; + + $test_num += $repeat; + $default = 0; + $repeat = 1; + + if ($rest =~ /\s+SKIP(.*)/) { + $rest = $1; + $skip = 1; + } else { + $skip = 0; + } + + if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) { + $repeat = $1; + $rest = $2; + $repeat_tests{"$test_num"} = $repeat; + } + + if ($rest =~ /\s+SKIP(.*)/) { + $rest = $1; + $skip = 1; + } + + if ($rest !~ /^\s*$/) { + die "$name: $.: Gargbage found after TEST_START\n$_"; + } + + if ($skip) { + $test_num = $old_test_num; + $repeat = 1; + } + + } elsif (/^\s*DEFAULTS(.*)$/) { + $default = 1; + + $rest = $1; + + if ($rest =~ /\s+SKIP(.*)/) { + $rest = $1; + $skip = 1; + } else { + $skip = 0; + } + + if ($rest !~ /^\s*$/) { + die "$name: $.: Gargbage found after DEFAULTS\n$_"; + } + + } elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) { + + next if ($skip); + my $lvalue = $1; my $rvalue = $2; - if (defined($opt{$lvalue})) { - die "Error: Option $lvalue defined more than once!\n"; + if (!$default && + ($lvalue eq "NUM_TESTS" || + $lvalue eq "LOG_FILE" || + $lvalue eq "CLEAR_LOG")) { + die "$name: $.: $lvalue must be set in DEFAULTS section\n"; + } + + if ($lvalue eq "NUM_TESTS") { + if ($test_num) { + die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n"; + } + if (!$default) { + die "$name: $.: NUM_TESTS must be set in default section\n"; + } + $num_tests_set = 1; + } + + if ($default || $lvalue =~ /\[\d+\]$/) { + set_value($lvalue, $rvalue); + } else { + my $val = "$lvalue\[$test_num\]"; + set_value($val, $rvalue); + + if ($repeat > 1) { + $repeats{$val} = $repeat; + } } - $opt{$lvalue} = $rvalue; + } else { + die "$name: $.: Garbage found in config\n$_"; } } close(IN); + if ($test_num) { + $test_num += $repeat - 1; + $opt{"NUM_TESTS"} = $test_num; + } + # set any defaults foreach my $default (keys %default) { @@ -398,6 +509,27 @@ sub reboot_to { run_command "$reboot_script"; } +sub get_sha1 { + my ($commit) = @_; + + doprint "git rev-list --max-count=1 $commit ... "; + my $sha1 = `git rev-list --max-count=1 $commit`; + my $ret = $?; + + logit $sha1; + + if ($ret) { + doprint "FAILED\n"; + dodie "Failed to get git $commit"; + } + + print "SUCCESS\n"; + + chomp $sha1; + + return $sha1; +} + sub monitor { my $booted = 0; my $bug = 0; @@ -497,7 +629,7 @@ sub install { dodie "Failed to install modules"; my $modlib = "/lib/modules/$version"; - my $modtar = "autotest-mods.tar.bz2"; + my $modtar = "ktest-mods.tar.bz2"; run_command "ssh $target rm -rf $modlib" or dodie "failed to remove old mods: $modlib"; @@ -840,6 +972,10 @@ sub bisect { my $start = $opt{"BISECT_START[$i]"}; my $replay = $opt{"BISECT_REPLAY[$i]"}; + # convert to true sha1's + $good = get_sha1($good); + $bad = get_sha1($bad); + if (defined($opt{"BISECT_REVERSE[$i]"}) && $opt{"BISECT_REVERSE[$i]"} == 1) { doprint "Performing a reverse bisect (bad is good, good is bad!)\n"; @@ -859,20 +995,7 @@ sub bisect { if (defined($check) && $check ne "0") { # get current HEAD - doprint "git rev-list HEAD --max-count=1 ... "; - my $head = `git rev-list HEAD --max-count=1`; - my $ret = $?; - - logit $head; - - if ($ret) { - doprint "FAILED\n"; - dodie "Failed to get git HEAD"; - } - - print "SUCCESS\n"; - - chomp $head; + my $head = get_sha1("HEAD"); if ($check ne "good") { doprint "TESTING BISECT BAD [$bad]\n"; @@ -956,6 +1079,10 @@ sub patchcheck { $end = $opt{"PATCHCHECK_END[$i]"}; } + # Get the true sha1's since we can use things like HEAD~3 + $start = get_sha1($start); + $end = get_sha1($end); + my $type = $opt{"PATCHCHECK_TYPE[$i]"}; # Can't have a test without having a test to run @@ -1054,8 +1181,29 @@ if ($opt{"CLEAR_LOG"} && defined($opt{"LOG_FILE"})) { doprint "\n\nSTARTING AUTOMATED TESTS\n\n"; -foreach my $option (sort keys %opt) { - doprint "$option = $opt{$option}\n"; +for (my $i = 0, my $repeat = 1; $i <= $opt{"NUM_TESTS"}; $i += $repeat) { + + if (!$i) { + doprint "DEFAULT OPTIONS:\n"; + } else { + doprint "\nTEST $i OPTIONS"; + if (defined($repeat_tests{$i})) { + $repeat = $repeat_tests{$i}; + doprint " ITERATE $repeat"; + } + doprint "\n"; + } + + foreach my $option (sort keys %opt) { + + if ($option =~ /\[(\d+)\]$/) { + next if ($i != $1); + } else { + next if ($i); + } + + doprint "$option = $opt{$option}\n"; + } } sub set_test_option { @@ -1067,6 +1215,16 @@ sub set_test_option { return $opt{$option}; } + foreach my $test (keys %repeat_tests) { + if ($i >= $test && + $i < $test + $repeat_tests{$test}) { + $option = "$name\[$test\]"; + if (defined($opt{$option})) { + return $opt{$option}; + } + } + } + if (defined($opt{$name})) { return $opt{$name}; } diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 546014a..9236fe9 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -1,25 +1,83 @@ # -# Config file for autotest.pl +# Config file for ktest.pl # # Note, all paths must be absolute # -# Almost all options may be overwritten per test run, by appending -# a [x] to the config. For example, to change the test type for -# the third iteration of tests, you can specify: -# (1 is for the first test, 2 for the second, and so on) +# Options set in the beginning of the file are considered to be +# default options. These options can be overriden by test specific +# options, with the following exceptions: # -# TEST_TYPE[3] = build -# -# The options that can not be changed like this are: -# NUM_TESTS # LOG_FILE # CLEAR_LOG # POWEROFF_ON_SUCCESS # REBOOT_ON_SUCCESS # +# Test specific options are set after the label: +# +# TEST_START +# +# The options after a TEST_START label are specific to that test. +# Each TEST_START label will set up a new test. If you want to +# perform a test more than once, you can add the ITERATE label +# to it followed by the number of times you want that test +# to iterate. If the ITERATE is left off, the test will only +# be performed once. +# +# TEST_START ITERATE 10 +# +# You can skip a test by adding SKIP (before or after the ITERATE +# and number) +# +# TEST_START SKIP +# +# TEST_START SKIP ITERATE 10 +# +# TEST_START ITERATE 10 SKIP +# +# The SKIP label causes the options and the test itself to be ignored. +# This is useful to set up several different tests in one config file, and +# only enabling the ones you want to use for a current test run. +# +# You can add default options anywhere in the file as well +# with the DEFAULTS tag. This allows you to have default options +# after the test options to keep the test options at the top +# of the file. You can even place the DEFAULTS tag between +# test cases (but not in the middle of a single test case) +# +# TEST_START +# MIN_CONFIG = /home/test/config-test1 +# +# DEFAULTS +# MIN_CONFIG = /home/test/config-default +# +# TEST_START ITERATE 10 +# +# The above will run the first test with MIN_CONFIG set to +# /home/test/config-test-1. Then 10 tests will be executed +# with MIN_CONFIG with /home/test/config-default. +# +# You can also disable defaults with the SKIP option +# +# DEFAULTS SKIP +# MIN_CONFIG = /home/test/config-use-sometimes +# +# DEFAULTS +# MIN_CONFIG = /home/test/config-most-times +# +# The above will ignore the first MIN_CONFIG. If you want to +# use the first MIN_CONFIG, remove the SKIP from the first +# DEFAULTS tag and add it to the second. Be careful, options +# may only be declared once per test or default. If you have +# the same option name under the same test or as default +# ktest will fail to execute, and no tests will run. +# + + +#### Mandatory Default Options #### -#### Mandatory Config Options #### +# These options must be in the default section, although most +# may be overridden by test options. # The machine hostname that you will test #MACHINE = target @@ -43,17 +101,21 @@ #TARGET_IMAGE = /boot/vmlinuz-test # A script or command to reboot the box +# # Here is a digital loggers power switch example #POWER_CYCLE = wget --no-proxy -O /dev/null -q --auth-no-challenge 'http://admin:admin@power/outlet?5=CCL' +# # Here is an example to reboot a virtual box on the current host # with the name "Guest". -#POWER_CYCLE = virsh list | grep '\<Guest\>' | awk '{printf ("%d", $1)}' | xargs virsh destroy; sleep 5; virsh start Guest +#POWER_CYCLE = virsh destroy Guest; sleep 5; virsh start Guest # The script or command that reads the console +# # If you use ttywatch server, something like the following would work. #CONSOLE = nc -d localhost 3001 +# # For a virtual machine with guest name "Guest". -#CONSOLE = virsh console `virsh list | grep '\<Guest\>' | awk '{printf ("%d", $1)}'` +#CONSOLE = virsh console Guest # Required version ending to differentiate the test # from other linux builds on the system. @@ -62,8 +124,14 @@ # The grub title name for the test kernel to boot # (Only mandatory if REBOOT_TYPE = grub) # +# Note, ktest.pl will not update the grub menu.lst, you need to +# manually add an option for the test. ktest.pl will search +# the grub menu.lst for this option to find what kernel to +# reboot into. +# # For example, if in the /boot/grub/menu.lst the test kernel title has: # title Test Kernel +# kernel vmlinuz-test #GRUB_MENU = Test Kernel # A script to reboot the target into the test kernel @@ -72,21 +140,37 @@ #### Optional Config Options (all have defaults) #### -# The number of tests to run (default 5) -#NUM_TESTS = 5 +# Start a test setup. If you leave this off, all options +# will be default and the test will run once. +# This is a label and not really an option (it takes no value). +# You can append ITERATE and a number after it to iterate the +# test a number of times, or SKIP to ignore this test. +# +#TEST_START +#TEST_START ITERATE 5 +#TEST_START SKIP # The default test type (default test) # The test types may be: # build - only build the kernel, do nothing else # boot - build and boot the kernel # test - build, boot and if TEST is set, run the test script +# (If TEST is not set, it defaults back to boot) # bisect - Perform a bisect on the kernel (see BISECT_TYPE below) # patchcheck - Do a test on a series of commits in git (see PATCHCHECK below) #TEST_TYPE = test -# The build type is any make config type or a command. +# Test to run if there is a successful boot and TEST_TYPE is test. +# Must exit with 0 on success and non zero on error +# default (undefined) +#TEST = ssh user@machine /root/run_test + +# The build type is any make config type or special command # (default randconfig) # nobuild - skip the clean and build step +# useconfig:/path/to/config - use the given config and run +# oldconfig on it. +# This option is ignored if TEST_TYPE is patchcheck or bisect #BUILD_TYPE = randconfig # The make command (default make) @@ -95,8 +179,14 @@ # If you need an initrd, you can add a script or code here to install # it. The environment variable KERNEL_VERSION will be set to the -# kernel version that is used. +# kernel version that is used. Remember to add the initrd line +# to your grub menu.lst file. +# +# Here's a couple of examples to use: #POST_INSTALL = ssh user@target /sbin/mkinitrd --allow-missing -f /boot/initramfs-test.img $KERNEL_VERSION +# +# or on some systems: +#POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION # Way to reboot the box to the test kernel. # Only valid options so far are "grub" and "script" @@ -106,12 +196,19 @@ # and select that target to reboot to the kernel. If this is not # your setup, then specify "script" and have a command or script # specified in REBOOT_SCRIPT to boot to the target. +# +# The entry in /boot/grub/menu.lst must be entered in manually. +# The test will not modify that file. #REBOOT_TYPE = grub -# Line to define success in output. (default "login:") +# Line to define a successful boot up in console output. # This is what the line contains, not the entire line. If you need -# the entire line to match, then use regural expression syntax like -# ^MyBox Login:$ +# the entire line to match, then use regural expression syntax like: +# (do not add any quotes around it) +# +# SUCCESS_LINE = ^MyBox Login:$ +# +# (default "login:") #SUCCESS_LINE = login: # As the test reads the console, after it hits the SUCCESS_LINE @@ -121,24 +218,33 @@ #BOOTED_TIMEOUT = 1 # The timeout in seconds when we consider the box hung after -# the console stop producing output. +# the console stop producing output. Be sure to leave enough +# time here to get pass a reboot. Some machines may not produce +# any console output for a long time during a reboot. You do +# not want the test to fail just because the system was in +# the process of rebooting to the test kernel. # (default 120) #TIMEOUT = 120 # The location on the host where to write temp files -# (default /tmp/autotest) -#TMP_DIR = /tmp/autotest +# (default /tmp/ktest) +#TMP_DIR = /tmp/ktest # In between tests, a reboot of the box may occur, and this # is the time to wait for the console after it stops producing # output. Some machines may not produce a large lag on reboot # so this should accommodate it. +# The difference between this and TIMEOUT, is that TIMEOUT happens +# when rebooting to the test kernel. This sleep time happens +# after a test has completed and we are about to start running +# another test. If a reboot to the reliable kernel happens, +# we wait SLEEP_TIME for the console to stop producing output +# before starting the next test. # (default 60) #SLEEP_TIME = 60 # The time in between bisects to sleep (in seconds) -# Can be less than SLEEP_TIME since bisects do more work -# in between boots. (default 60) +# (default 60) #BISECT_SLEEP_TIME = 60 # Build without doing a make mrproper, or removing .config @@ -149,10 +255,12 @@ #REBOOT_ON_ERROR = 0 # Power off the target on error (ignored if REBOOT_ON_ERROR is set) +# Note, this is a DEFAULT section only option. # (default 0) #POWEROFF_ON_ERROR = 0 # Power off the target after all tests have completed successfully +# Note, this is a DEFAULT section only option. # (default 0) #POWEROFF_ON_SUCCESS = 0 @@ -160,7 +268,7 @@ # (ignored if POWEROFF_ON_SUCCESS is set) #REBOOT_ON_SUCCESS = 1 -# In case there's isses with rebooting, you can specify this +# In case there are isses with rebooting, you can specify this # to always powercycle after this amount of time after calling # reboot. # Note, POWERCYCLE_AFTER_REBOOT = 0 does NOT disable it. It just @@ -190,43 +298,68 @@ # Directory to store failure directories on failure. If this is not # set, DIE_ON_FAILURE=0 will not save off the .config, dmesg and -# bootlog. +# bootlog. This option is ignored if DIE_ON_FAILURE is not set. +# (default undefined) #STORE_FAILURES = /home/test/failures -# A script or command to power off the box (default undef) +# A script or command to power off the box (default undefined) # Needed for POWEROFF_ON_ERROR and SUCCESS +# # Example for digital loggers power switch: #POWER_OFF = wget --no-proxy -O /dev/null -q --auth-no-challenge 'http://admin:admin@power/outlet?5=OFF' +# # Example for a virtual guest call "Guest". -#POWER_OFF = virsh list | grep '\<GuestF12\>' | awk '{printf ("%d", $1)}' | xargs virsh destroy +#POWER_OFF = virsh destroy Guest -# Any build options for the make (default "") +# Any build options for the make of the kernel (not for other makes, like configs) +# (default "") #BUILD_OPTIONS = -j20 # Optional log file to write the status (recommended) -# (default undef) +# Note, this is a DEFAULT section only option. +# (default undefined) #LOG_FILE = /home/test/logfiles/target.log # Remove old logfile if it exists before starting all tests. +# Note, this is a DEFAULT section only option. # (default 0) #CLEAR_LOG = 0 -# Test to run if there is a successful boot and TEST_TYPE is test. -# Must exit with 0 on success and non zero on error -# default (undef) -#TEST = ssh user@machine /root/run_test -#TEST[1] = ssh root@mxtest /root/run_test - # The min config that is needed to build for the machine -# A nice way to get this to work, is to do a "lsmod > mymods" on the target -# copy it to the build server, and then run "make LSMOD=mymods localyesconfig". -# Then copy all the options that are set: "grep '^CONFIG' > /home/test/config-min" +# A nice way to create this is with the following: +# +# $ ssh target +# $ lsmod > mymods +# $ scp mymods host:/tmp +# $ exit +# $ cd linux.git +# $ rm .config +# $ make LSMOD=mymods localyesconfig +# $ grep '^CONFIG' .config > /home/test/config-min +# +# If you want even less configs: +# +# log in directly to target (do not ssh) +# +# $ su +# # lsmod | cut -d' ' -f1 | xargs rmmod +# +# repeat the above several times # -# You might want to set: +# # lsmod > mymods +# # reboot +# +# May need to reboot to get your network back to copy the mymods +# to the host, and then remove the previous .config and run the +# localyesconfig again. The CONFIG_MIN generated like this will +# not guarantee network activity to the box so the TEST_TYPE of +# test may fail. +# +# You might also want to set: # CONFIG_CMDLINE="<your options here>" # randconfig may set the above and override your real command # line options. -# (default undef) +# (default undefined) #MIN_CONFIG = /home/test/config-min # Sometimes there's options that just break the boot and @@ -239,34 +372,47 @@ # KGDB may cause oops waiting for a connection that's not there. # This option points to the file containing config options that will be prepended # to the MIN_CONFIG (or be the MIN_CONFIG if it is not set) -# before running it through randconfig -# (default undef) +# +# Note, config options in MIN_CONFIG will override these options. +# +# (default undefined) #ADD_CONFIG = /home/test/config-broken #### Per test run options #### -# These are options are per build only. The only exist with the [x] -# syntax, and there is no general option. +# The following options are only allowed in TEST_START sections. +# They are ignored in the DEFAULTS sections. # -# All are optional and undef by default +# All of these are optional and undefined by default, although +# some of these options are required for TEST_TYPE of patchcheck +# and bisect. # -# CHECKOUT[x] = branch +# +# CHECKOUT = branch # # If the BUILD_DIR is a git repository, then you can set this option # to checkout the given branch before running the TEST. If you # specify this for the first run, that branch will be used for -# all preceding tests until a new CHECKOUT[x] is set. +# all preceding tests until a new CHECKOUT is set. +# # -# For TEST_TYPE[x] = patchcheck +# +# For TEST_TYPE = patchcheck # # This expects the BUILD_DIR to be a git repository, and -# will checkout the PATCHCHECK_START[x]. +# will checkout the PATCHCHECK_START commit. +# +# The option BUILD_TYPE will be ignored. # -# PATCHCHECK_START[x] is required and is the first patch to -# test (the SHA1 of the commit). +# The MIN_CONFIG will be used for all builds of the patchcheck. The build type +# used for patchcheck is oldconfig. # -# PATCHCHECK_END[x] is the last patch to check (default HEAD) +# PATCHCHECK_START is required and is the first patch to +# test (the SHA1 of the commit). You may also specify anything +# that git checkout allows (branch name, tage, HEAD~3). # -# PATCHCHECK_TYPE[x] is required and is the type of test to run: +# PATCHCHECK_END is the last patch to check (default HEAD) +# +# PATCHCHECK_TYPE is required and is the type of test to run: # build, boot, test. # # Note, the build test will look for warnings, if a warning occurred @@ -279,75 +425,86 @@ # make mrproper. This helps speed up the test. # # Example: -# TEST_TYPE[1] = patchcheck -# CHECKOUT[1] = mybranch -# PATCHCHECK_TYPE[1] = boot -# PATCHCHECK_START[1] = 747e94ae3d1b4c9bf5380e569f614eb9040b79e7 -# PATCHCHEKC_END[1] = b8b2663bd7c9da04ac804659b9f617c199d0252c +# TEST_START +# TEST_TYPE = patchcheck +# CHECKOUT = mybranch +# PATCHCHECK_TYPE = boot +# PATCHCHECK_START = 747e94ae3d1b4c9bf5380e569f614eb9040b79e7 +# PATCHCHEKC_END = HEAD~2 +# # # -# For TEST_TYPE[x] = bisect +# For TEST_TYPE = bisect # -# You can specify a git bisect if the BUILD_DIR is a git repository. -# The MIN_CONFIG will be used for all builds of the bisect. The build type -# used for bisecting is oldconfig. +# You can specify a git bisect if the BUILD_DIR is a git repository. +# The MIN_CONFIG will be used for all builds of the bisect. The build type +# used for bisecting is oldconfig. # -# BISECT_TYPE[x] is the type of test to perform: +# The option BUILD_TYPE will be ignored. +# +# BISECT_TYPE is the type of test to perform: # build - bad fails to build # boot - bad builds but fails to boot # test - bad boots but fails a test # -# BISECT_GOOD[x] is the commit (SHA1) to label as good -# BISECT_BAD[x] is the commit to label as bad +# BISECT_GOOD is the commit (SHA1) to label as good (accepts all git good commit types) +# BISECT_BAD is the commit to label as bad (accepts all git bad commit types) # # The above three options are required for a bisect operation. # -# BISECT_REPLAY[x] = /path/to/replay/file (optional, default undefined) +# BISECT_REPLAY = /path/to/replay/file (optional, default undefined) # # If an operation failed in the bisect that was not expected to # fail. Then the test ends. The state of the BUILD_DIR will be -# left off at where the failur occurred. You can examine the +# left off at where the failure occurred. You can examine the # reason for the failure, and perhaps even find a git commit # that would work to continue with. You can run: # # git bisect log > /path/to/replay/file # -# and if BISECT_REPLAY[x] is set, the test will run git bisect replay -# before continuing with the bisect. +# The adding: # -# BISECT_START[x] = commit (optional, default undefined) +# BISECT_REPLAY= /path/to/replay/file # -# As with BISECT_REPLAY[x], if the test failed on a commit that -# just happen to have a bad commit in the middle of the bisect, -# and you need to skip it. If BISECT_START[x] is defined, it -# will checkout that commit before continuing with the bisect. +# And running the test again. The test will perform the initial +# git bisect start, git bisect good, and git bisect bad, and +# then it will run git bisect replay on this file, before +# continuing with the bisect. # -# Note, BISECT_REPLAY[x] is executed before BISECT_START[x]. +# BISECT_START = commit (optional, default undefined) +# +# As with BISECT_REPLAY, if the test failed on a commit that +# just happen to have a bad commit in the middle of the bisect, +# and you need to skip it. If BISECT_START is defined, it +# will checkout that commit after doing the initial git bisect start, +# git bisect good, git bisect bad, and running the git bisect replay +# if the BISECT_REPLAY is set. # -# BISECT_REVERSE[x] = 1 (optional, default 0) +# BISECT_REVERSE = 1 (optional, default 0) # # In those strange instances where it was broken forever # and you are trying to find where it started to work! -# Set BISECT_GOOD[x] to the commit that was last known to fail -# Set BISECT_BAD[x] to the commit that is known where it started -# to work. With BISECT_REVERSE[x] = 1, The test will consider -# failures as good, and success as bad. +# Set BISECT_GOOD to the commit that was last known to fail +# Set BISECT_BAD to the commit that is known to start working. +# With BISECT_REVERSE = 1, The test will consider failures as +# good, and success as bad. # -# BISECT_CHECK[x] = 1 (optional, default 0) +# BISECT_CHECK = 1 (optional, default 0) # # Just to be sure the good is good and bad is bad, setting -# BISECT_CHECK[x] to 1 will start the bisect by first checking -# out BISECT_BAD[x] and makes sure it fails, then it will check -# out BISECT_GOOD[x] and makes sure it succeeds before starting -# the bisect (it works for BISECT_REVERSE[x] too). +# BISECT_CHECK to 1 will start the bisect by first checking +# out BISECT_BAD and makes sure it fails, then it will check +# out BISECT_GOOD and makes sure it succeeds before starting +# the bisect (it works for BISECT_REVERSE too). # -# You can limit the test to just check BISECT_GOOD[x] or -# BISECT_BAD[x] with BISECT_CHECK[x] = good or -# BISECT_CHECK[x] = bad, respectively. +# You can limit the test to just check BISECT_GOOD or +# BISECT_BAD with BISECT_CHECK = good or +# BISECT_CHECK = bad, respectively. # # Example: -# TEST_TYPE[1] = bisect -# BISECT_GOOD[1] = v2.6.36 -# BISECT_BAD[1] = b5153163ed580e00c67bdfecb02b2e3843817b3e -# BISECT_TYPE[1] = build -# MIN_CONFIG[1] = /home/test/config-bisect +# TEST_START +# TEST_TYPE = bisect +# BISECT_GOOD = v2.6.36 +# BISECT_BAD = b5153163ed580e00c67bdfecb02b2e3843817b3e +# BISECT_TYPE = build +# MIN_CONFIG = /home/test/config-bisect |
