diff options
-rw-r--r-- | drivers/bus/arm-cci.c | 119 |
1 files changed, 113 insertions, 6 deletions
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c index ea81fa4..380319e 100644 --- a/drivers/bus/arm-cci.c +++ b/drivers/bus/arm-cci.c @@ -43,6 +43,7 @@ enum cci_ace_port_type { struct cci_ace_port { void __iomem *base; + unsigned long phys; enum cci_ace_port_type type; struct device_node *dn; }; @@ -51,11 +52,13 @@ static struct cci_ace_port *ports; static unsigned int nb_cci_ports; static void __iomem *cci_ctrl_base; +static unsigned long cci_ctrl_phys; struct cpu_port { u64 mpidr; u32 port; }; + /* * Use the port MSB as valid flag, shift can be made dynamic * by computing number of bits required for port indexes. @@ -230,6 +233,102 @@ int notrace cci_disable_port_by_cpu(u64 mpidr) EXPORT_SYMBOL_GPL(cci_disable_port_by_cpu); /** + * cci_enable_port_for_self() - enable a CCI port for calling CPU + * + * Enabling a CCI port for the calling CPU implies enabling the CCI + * port controlling that CPU's cluster. Caller must make sure that the + * CPU running the code is the first active CPU in the cluster and all + * other CPUs are quiescent in a low power state or waiting for this CPU + * to complete the CCI initialization. + * + * Because this is called when the MMU is still off and with no stack, + * the code must be position independent and ideally rely on callee + * clobbered registers only. To achieve this we must code this function + * entirely in assembler. + * + * On success this returns with the proper CCI port enabled. In case of + * any failure this never returns as the inability to enable the CCI is + * fatal and there is no possible recovery at this stage. + */ +asmlinkage void __naked cci_enable_port_for_self(void) +{ + asm volatile ("\n" + +" mrc p15, 0, r0, c0, c0, 5 @ get MPIDR value \n" +" and r0, r0, #"__stringify(MPIDR_HWID_BITMASK)" \n" +" adr r1, 5f \n" +" ldr r2, [r1] \n" +" add r1, r1, r2 @ &cpu_port \n" +" add ip, r1, %[sizeof_cpu_port] \n" + + /* Loop over the cpu_port array looking for a matching MPIDR */ +"1: ldr r2, [r1, %[offsetof_cpu_port_mpidr_lsb]] \n" +" cmp r2, r0 @ compare MPIDR \n" +" bne 2f \n" + + /* Found a match, now test port validity */ +" ldr r3, [r1, %[offsetof_cpu_port_port]] \n" +" tst r3, #"__stringify(PORT_VALID)" \n" +" bne 3f \n" + + /* no match, loop with the next cpu_port entry */ +"2: add r1, r1, %[sizeof_struct_cpu_port] \n" +" cmp r1, ip @ done? \n" +" blo 1b \n" + + /* CCI port not found -- cheaply try to stall this CPU */ +"cci_port_not_found: \n" +" wfi \n" +" wfe \n" +" b cci_port_not_found \n" + + /* Use matched port index to look up the corresponding ports entry */ +"3: bic r3, r3, #"__stringify(PORT_VALID)" \n" +" adr r0, 6f \n" +" ldmia r0, {r1, r2} \n" +" sub r1, r1, r0 @ virt - phys \n" +" ldr r0, [r0, r2] @ *(&ports) \n" +" mov r2, %[sizeof_struct_ace_port] \n" +" mla r0, r2, r3, r0 @ &ports[index] \n" +" sub r0, r0, r1 @ virt_to_phys() \n" + + /* Enable the CCI port */ +" ldr r0, [r0, %[offsetof_port_phys]] \n" +" mov r3, #"__stringify(CCI_ENABLE_REQ)" \n" +" str r3, [r0, #"__stringify(CCI_PORT_CTRL)"] \n" + + /* poll the status reg for completion */ +" adr r1, 7f \n" +" ldr r0, [r1] \n" +" ldr r0, [r0, r1] @ cci_ctrl_base \n" +"4: ldr r1, [r0, #"__stringify(CCI_CTRL_STATUS)"] \n" +" tst r1, #1 \n" +" bne 4b \n" + +" mov r0, #0 \n" +" bx lr \n" + +" .align 2 \n" +"5: .word cpu_port - . \n" +"6: .word . \n" +" .word ports - 6b \n" +"7: .word cci_ctrl_phys - . \n" + : : + [sizeof_cpu_port] "i" (sizeof(cpu_port)), +#ifndef __ARMEB__ + [offsetof_cpu_port_mpidr_lsb] "i" (offsetof(struct cpu_port, mpidr)), +#else + [offsetof_cpu_port_mpidr_lsb] "i" (offsetof(struct cpu_port, mpidr)+4), +#endif + [offsetof_cpu_port_port] "i" (offsetof(struct cpu_port, port)), + [sizeof_struct_cpu_port] "i" (sizeof(struct cpu_port)), + [sizeof_struct_ace_port] "i" (sizeof(struct cci_ace_port)), + [offsetof_port_phys] "i" (offsetof(struct cci_ace_port, phys)) ); + + unreachable(); +} + +/** * __cci_control_port_by_device() - function to control a CCI port by device * reference * @@ -306,6 +405,7 @@ static int __init cci_probe(void) struct cci_nb_ports const *cci_config; int ret, i, nb_ace = 0, nb_ace_lite = 0; struct device_node *np, *cp; + struct resource res; const char *match_str; bool is_ace; @@ -323,9 +423,12 @@ static int __init cci_probe(void) if (!ports) return -ENOMEM; - cci_ctrl_base = of_iomap(np, 0); - - if (!cci_ctrl_base) { + ret = of_address_to_resource(np, 0, &res); + if (!ret) { + cci_ctrl_base = ioremap(res.start, resource_size(&res)); + cci_ctrl_phys = res.start; + } + if (ret || !cci_ctrl_base) { WARN(1, "unable to ioremap CCI ctrl\n"); ret = -ENXIO; goto memalloc_err; @@ -353,9 +456,12 @@ static int __init cci_probe(void) continue; } - ports[i].base = of_iomap(cp, 0); - - if (!ports[i].base) { + ret = of_address_to_resource(cp, 0, &res); + if (!ret) { + ports[i].base = ioremap(res.start, resource_size(&res)); + ports[i].phys = res.start; + } + if (ret || !ports[i].base) { WARN(1, "unable to ioremap CCI port %d\n", i); continue; } @@ -382,6 +488,7 @@ static int __init cci_probe(void) * cluster power-up/power-down. Make sure it reaches main memory. */ sync_cache_w(&cci_ctrl_base); + sync_cache_w(&cci_ctrl_phys); sync_cache_w(&ports); sync_cache_w(&cpu_port); __sync_cache_range_w(ports, sizeof(*ports) * nb_cci_ports); |