diff options
32 files changed, 1803 insertions, 1787 deletions
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.txt b/Documentation/devicetree/bindings/leds/leds-pwm.txt new file mode 100644 index 0000000..7297107 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-pwm.txt @@ -0,0 +1,48 @@ +LED connected to PWM + +Required properties: +- compatible : should be "pwm-leds". + +Each LED is represented as a sub-node of the pwm-leds device. Each +node's name represents the name of the corresponding LED. + +LED sub-node properties: +- pwms : PWM property to point to the PWM device (phandle)/port (id) and to + specify the period time to be used: <&phandle id period_ns>; +- pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device + For the pwms and pwm-names property please refer to: + Documentation/devicetree/bindings/pwm/pwm.txt +- max-brightness : Maximum brightness possible for the LED +- label : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt + +Example: + +twl_pwm: pwm { + /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */ + compatible = "ti,twl6030-pwm"; + #pwm-cells = <2>; +}; + +twl_pwmled: pwmled { + /* provides one PWM (id 0 for Charing indicator LED) */ + compatible = "ti,twl6030-pwmled"; + #pwm-cells = <2>; +}; + +pwmleds { + compatible = "pwm-leds"; + kpad { + label = "omap4::keypad"; + pwms = <&twl_pwm 0 7812500>; + max-brightness = <127>; + }; + + charging { + label = "omap4:green:chrg"; + pwms = <&twl_pwmled 0 7812500>; + max-brightness = <255>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/tca6507.txt b/Documentation/devicetree/bindings/leds/tca6507.txt new file mode 100644 index 0000000..2b6693b --- /dev/null +++ b/Documentation/devicetree/bindings/leds/tca6507.txt @@ -0,0 +1,33 @@ +LEDs conected to tca6507 + +Required properties: +- compatible : should be : "ti,tca6507". + +Each led is represented as a sub-node of the ti,tca6507 device. + +LED sub-node properties: +- label : (optional) see Documentation/devicetree/bindings/leds/common.txt +- reg : number of LED line (could be from 0 to 6) +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt + +Examples: + +tca6507@45 { + compatible = "ti,tca6507"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x45>; + + led0: red-aux@0 { + label = "red:aux"; + reg = <0x0>; + }; + + led1: green-aux@1 { + label = "green:aux"; + reg = <0x5>; + linux,default-trigger = "default-on"; + }; +}; + diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX index 5fefe37..5246090 100644 --- a/Documentation/leds/00-INDEX +++ b/Documentation/leds/00-INDEX @@ -6,5 +6,7 @@ leds-lp5521.txt - notes on how to use the leds-lp5521 driver. leds-lp5523.txt - notes on how to use the leds-lp5523 driver. +leds-lp55xx.txt + - description about lp55xx common driver. leds-lm3556.txt - notes on how to use the leds-lm3556 driver. diff --git a/Documentation/leds/leds-lp5521.txt b/Documentation/leds/leds-lp5521.txt index 0e542ab..270f571 100644 --- a/Documentation/leds/leds-lp5521.txt +++ b/Documentation/leds/leds-lp5521.txt @@ -17,19 +17,8 @@ lp5521:channelx, where x is 0 .. 2 All three channels can be also controlled using the engine micro programs. More details of the instructions can be found from the public data sheet. -Control interface for the engines: -x is 1 .. 3 -enginex_mode : disabled, load, run -enginex_load : store program (visible only in engine load mode) - -Example (start to blink the channel 2 led): -cd /sys/class/leds/lp5521:channel2/device -echo "load" > engine3_mode -echo "037f4d0003ff6000" > engine3_load -echo "run" > engine3_mode - -stop the engine: -echo "disabled" > engine3_mode +LP5521 has the internal program memory for running various LED patterns. +For the details, please refer to 'firmware' section in leds-lp55xx.txt sysfs contains a selftest entry. The test communicates with the chip and checks that @@ -47,7 +36,7 @@ The name of each channel can be configurable. If the name field is not defined, the default name will be set to 'xxxx:channelN' (XXXX : pdata->label or i2c client name, N : channel number) -static struct lp5521_led_config lp5521_led_config[] = { +static struct lp55xx_led_config lp5521_led_config[] = { { .name = "red", .chan_nr = 0, @@ -81,10 +70,10 @@ static void lp5521_enable(bool state) /* Control of chip enable signal */ } -static struct lp5521_platform_data lp5521_platform_data = { +static struct lp55xx_platform_data lp5521_platform_data = { .led_config = lp5521_led_config, .num_channels = ARRAY_SIZE(lp5521_led_config), - .clock_mode = LP5521_CLOCK_EXT, + .clock_mode = LP55XX_CLOCK_EXT, .setup_resources = lp5521_setup, .release_resources = lp5521_release, .enable = lp5521_enable, @@ -105,47 +94,9 @@ example of update_config : LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT | \ LP5521_CLK_INT) -static struct lp5521_platform_data lp5521_pdata = { +static struct lp55xx_platform_data lp5521_pdata = { .led_config = lp5521_led_config, .num_channels = ARRAY_SIZE(lp5521_led_config), - .clock_mode = LP5521_CLOCK_INT, + .clock_mode = LP55XX_CLOCK_INT, .update_config = LP5521_CONFIGS, }; - -LED patterns : LP5521 has autonomous operation without external control. -Pattern data can be defined in the platform data. - -example of led pattern data : - -/* RGB(50,5,0) 500ms on, 500ms off, infinite loop */ -static u8 pattern_red[] = { - 0x40, 0x32, 0x60, 0x00, 0x40, 0x00, 0x60, 0x00, - }; - -static u8 pattern_green[] = { - 0x40, 0x05, 0x60, 0x00, 0x40, 0x00, 0x60, 0x00, - }; - -static struct lp5521_led_pattern board_led_patterns[] = { - { - .r = pattern_red, - .g = pattern_green, - .size_r = ARRAY_SIZE(pattern_red), - .size_g = ARRAY_SIZE(pattern_green), - }, -}; - -static struct lp5521_platform_data lp5521_platform_data = { - .led_config = lp5521_led_config, - .num_channels = ARRAY_SIZE(lp5521_led_config), - .clock_mode = LP5521_CLOCK_EXT, - .patterns = board_led_patterns, - .num_patterns = ARRAY_SIZE(board_led_patterns), -}; - -Then predefined led pattern(s) can be executed via the sysfs. -To start the pattern #1, -# echo 1 > /sys/bus/i2c/devices/xxxx/led_pattern -(xxxx : i2c bus & slave address) -To end the pattern, -# echo 0 > /sys/bus/i2c/devices/xxxx/led_pattern diff --git a/Documentation/leds/leds-lp5523.txt b/Documentation/leds/leds-lp5523.txt index c2743f5..899fdad 100644 --- a/Documentation/leds/leds-lp5523.txt +++ b/Documentation/leds/leds-lp5523.txt @@ -27,25 +27,8 @@ c) Default If both fields are NULL, 'lp5523' is used by default. /sys/class/leds/lp5523:channelN (N: 0 ~ 8) -The chip provides 3 engines. Each engine can control channels without -interaction from the main CPU. Details of the micro engine code can be found -from the public data sheet. Leds can be muxed to different channels. - -Control interface for the engines: -x is 1 .. 3 -enginex_mode : disabled, load, run -enginex_load : microcode load (visible only in load mode) -enginex_leds : led mux control (visible only in load mode) - -cd /sys/class/leds/lp5523:channel2/device -echo "load" > engine3_mode -echo "9d80400004ff05ff437f0000" > engine3_load -echo "111111111" > engine3_leds -echo "run" > engine3_mode - -sysfs contains a selftest entry. It measures each channel -voltage level and checks if it looks reasonable. If the level is too high, -the led is missing; if the level is too low, there is a short circuit. +LP5523 has the internal program memory for running various LED patterns. +For the details, please refer to 'firmware' section in leds-lp55xx.txt Selftest uses always the current from the platform data. @@ -58,7 +41,7 @@ Example platform data: Note - chan_nr can have values between 0 and 8. -static struct lp5523_led_config lp5523_led_config[] = { +static struct lp55xx_led_config lp5523_led_config[] = { { .name = "D1", .chan_nr = 0, @@ -88,10 +71,10 @@ static void lp5523_enable(bool state) /* Control chip enable signal */ } -static struct lp5523_platform_data lp5523_platform_data = { +static struct lp55xx_platform_data lp5523_platform_data = { .led_config = lp5523_led_config, .num_channels = ARRAY_SIZE(lp5523_led_config), - .clock_mode = LP5523_CLOCK_EXT, + .clock_mode = LP55XX_CLOCK_EXT, .setup_resources = lp5523_setup, .release_resources = lp5523_release, .enable = lp5523_enable, diff --git a/Documentation/leds/leds-lp55xx.txt b/Documentation/leds/leds-lp55xx.txt new file mode 100644 index 0000000..ced4186 --- /dev/null +++ b/Documentation/leds/leds-lp55xx.txt @@ -0,0 +1,118 @@ +LP5521/LP5523/LP55231 Common Driver +=================================== + +Authors: Milo(Woogyom) Kim <milo.kim@ti.com> + +Description +----------- +LP5521, LP5523/55231 have common features as below. + + Register access via the I2C + Device initialization/deinitialization + Create LED class devices for multiple output channels + Device attributes for user-space interface + Program memory for running LED patterns + +The LP55xx common driver provides these features using exported functions. + lp55xx_init_device() / lp55xx_deinit_device() + lp55xx_register_leds() / lp55xx_unregister_leds() + lp55xx_regsister_sysfs() / lp55xx_unregister_sysfs() + +( Driver Structure Data ) + +In lp55xx common driver, two different data structure is used. + +o lp55xx_led + control multi output LED channels such as led current, channel index. +o lp55xx_chip + general chip control such like the I2C and platform data. + +For example, LP5521 has maximum 3 LED channels. +LP5523/55231 has 9 output channels. + +lp55xx_chip for LP5521 ... lp55xx_led #1 + lp55xx_led #2 + lp55xx_led #3 + +lp55xx_chip for LP5523 ... lp55xx_led #1 + lp55xx_led #2 + . + . + lp55xx_led #9 + +( Chip Dependent Code ) + +To support device specific configurations, special structure +'lpxx_device_config' is used. + + Maximum number of channels + Reset command, chip enable command + Chip specific initialization + Brightness control register access + Setting LED output current + Program memory address access for running patterns + Additional device specific attributes + +( Firmware Interface ) + +LP55xx family devices have the internal program memory for running +various LED patterns. +This pattern data is saved as a file in the user-land or +hex byte string is written into the memory through the I2C. +LP55xx common driver supports the firmware interface. + +LP55xx chips have three program engines. +To load and run the pattern, the programming sequence is following. + (1) Select an engine number (1/2/3) + (2) Mode change to load + (3) Write pattern data into selected area + (4) Mode change to run + +The LP55xx common driver provides simple interfaces as below. +select_engine : Select which engine is used for running program +run_engine : Start program which is loaded via the firmware interface +firmware : Load program data + +For example, run blinking pattern in engine #1 of LP5521 +echo 1 > /sys/bus/i2c/devices/xxxx/select_engine +echo 1 > /sys/class/firmware/lp5521/loading +echo "4000600040FF6000" > /sys/class/firmware/lp5521/data +echo 0 > /sys/class/firmware/lp5521/loading +echo 1 > /sys/bus/i2c/devices/xxxx/run_engine + +For example, run blinking pattern in engine #3 of LP55231 +echo 3 > /sys/bus/i2c/devices/xxxx/select_engine +echo 1 > /sys/class/firmware/lp55231/loading +echo "9d0740ff7e0040007e00a0010000" > /sys/class/firmware/lp55231/data +echo 0 > /sys/class/firmware/lp55231/loading +echo 1 > /sys/bus/i2c/devices/xxxx/run_engine + +To start blinking patterns in engine #2 and #3 simultaneously, +for idx in 2 3 +do + echo $idx > /sys/class/leds/red/device/select_engine + sleep 0.1 + echo 1 > /sys/class/firmware/lp5521/loading + echo "4000600040FF6000" > /sys/class/firmware/lp5521/data + echo 0 > /sys/class/firmware/lp5521/loading +done +echo 1 > /sys/class/leds/red/device/run_engine + +Here is another example for LP5523. +echo 2 > /sys/bus/i2c/devices/xxxx/select_engine +echo 1 > /sys/class/firmware/lp5523/loading +echo "9d80400004ff05ff437f0000" > /sys/class/firmware/lp5523/data +echo 0 > /sys/class/firmware/lp5523/loading +echo 1 > /sys/bus/i2c/devices/xxxx/run_engine + +As soon as 'loading' is set to 0, registered callback is called. +Inside the callback, the selected engine is loaded and memory is updated. +To run programmed pattern, 'run_engine' attribute should be enabled. + +( 'run_engine' and 'firmware_cb' ) +The sequence of running the program data is common. +But each device has own specific register addresses for commands. +To support this, 'run_engine' and 'firmware_cb' are configurable in each driver. +run_engine : Control the selected engine +firmware_cb : The callback function after loading the firmware is done. + Chip specific commands for loading and updating program memory. diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index c26d441..3a077df 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -40,7 +40,7 @@ #include <sound/tpa6130a2-plat.h> #include <media/radio-si4713.h> #include <media/si4713.h> -#include <linux/leds-lp5523.h> +#include <linux/platform_data/leds-lp55xx.h> #include <linux/platform_data/tsl2563.h> #include <linux/lis3lv02d.h> @@ -160,7 +160,7 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = { #endif #if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) -static struct lp5523_led_config rx51_lp5523_led_config[] = { +static struct lp55xx_led_config rx51_lp5523_led_config[] = { { .name = "lp5523:kb1", .chan_nr = 0, @@ -216,10 +216,10 @@ static void rx51_lp5523_enable(bool state) gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state); } -static struct lp5523_platform_data rx51_lp5523_platform_data = { +static struct lp55xx_platform_data rx51_lp5523_platform_data = { .led_config = rx51_lp5523_led_config, .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), - .clock_mode = LP5523_CLOCK_AUTO, + .clock_mode = LP55XX_CLOCK_AUTO, .setup_resources = rx51_lp5523_setup, .release_resources = rx51_lp5523_release, .enable = rx51_lp5523_enable, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 3868aa4..b034578 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -28,7 +28,7 @@ #include <linux/mfd/tps6105x.h> #include <linux/mfd/abx500/ab8500-gpio.h> #include <linux/mfd/abx500/ab8500-codec.h> -#include <linux/leds-lp5521.h> +#include <linux/platform_data/leds-lp55xx.h> #include <linux/input.h> #include <linux/smsc911x.h> #include <linux/gpio_keys.h> @@ -301,7 +301,7 @@ static struct tc3589x_platform_data mop500_tc35892_data = { .irq_base = MOP500_EGPIO_IRQ_BASE, }; -static struct lp5521_led_config lp5521_pri_led[] = { +static struct lp55xx_led_config lp5521_pri_led[] = { [0] = { .chan_nr = 0, .led_current = 0x2f, @@ -319,14 +319,14 @@ static struct lp5521_led_config lp5521_pri_led[] = { }, }; -static struct lp5521_platform_data __initdata lp5521_pri_data = { +static struct lp55xx_platform_data __initdata lp5521_pri_data = { .label = "lp5521_pri", .led_config = &lp5521_pri_led[0], .num_channels = 3, - .clock_mode = LP5521_CLOCK_EXT, + .clock_mode = LP55XX_CLOCK_EXT, }; -static struct lp5521_led_config lp5521_sec_led[] = { +static struct lp55xx_led_config lp5521_sec_led[] = { [0] = { .chan_nr = 0, .led_current = 0x2f, @@ -344,11 +344,11 @@ static struct lp5521_led_config lp5521_sec_led[] = { }, }; -static struct lp5521_platform_data __initdata lp5521_sec_data = { +static struct lp55xx_platform_data __initdata lp5521_sec_data = { .label = "lp5521_sec", .led_config = &lp5521_sec_led[0], .num_channels = 3, - .clock_mode = LP5521_CLOCK_EXT, + .clock_mode = LP55XX_CLOCK_EXT, }; static struct i2c_board_info __initdata mop500_i2c0_devices[] = { diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 4469b44..ec50824 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -193,9 +193,18 @@ config LEDS_LP3944 To compile this driver as a module, choose M here: the module will be called leds-lp3944. +config LEDS_LP55XX_COMMON + tristate "Common Driver for TI/National LP5521 and LP5523/55231" + depends on LEDS_LP5521 || LEDS_LP5523 + select FW_LOADER + help + This option supports common operations for LP5521 and LP5523/55231 + devices. + config LEDS_LP5521 tristate "LED Support for N.S. LP5521 LED driver chip" depends on LEDS_CLASS && I2C + select LEDS_LP55XX_COMMON help If you say yes here you get support for the National Semiconductor LP5521 LED driver. It is 3 channel chip with programmable engines. @@ -205,6 +214,7 @@ config LEDS_LP5521 config LEDS_LP5523 tristate "LED Support for TI/National LP5523/55231 LED driver chip" depends on LEDS_CLASS && I2C + select LEDS_LP55XX_COMMON help If you say yes here you get support for TI/National Semiconductor LP5523/55231 LED driver. @@ -310,7 +320,7 @@ config LEDS_DAC124S085 config LEDS_PWM tristate "PWM driven LED Support" depends on LEDS_CLASS - depends on HAVE_PWM + depends on PWM help This option enables support for pwm driven LEDs diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 3fb9641..215e7e3 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o obj-$(CONFIG_LEDS_GPIO_REGISTER) += leds-gpio-register.o obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o +obj-$(CONFIG_LEDS_LP55XX_COMMON) += leds-lp55xx-common.o obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o diff --git a/drivers/leds/leds-88pm860x.c b/drivers/leds/leds-88pm860x.c index 6be2edd4..f5b9ea3 100644 --- a/drivers/leds/leds-88pm860x.c +++ b/drivers/leds/leds-88pm860x.c @@ -128,8 +128,10 @@ static void pm860x_led_set(struct led_classdev *cdev, static int pm860x_led_dt_init(struct platform_device *pdev, struct pm860x_led *data) { - struct device_node *nproot = pdev->dev.parent->of_node, *np; + struct device_node *nproot, *np; int iset = 0; + + nproot = of_node_get(pdev->dev.parent->of_node); if (!nproot) return -ENODEV; nproot = of_find_node_by_name(nproot, "leds"); @@ -145,6 +147,7 @@ static int pm860x_led_dt_init(struct platform_device *pdev, break; } } + of_node_put(nproot); return 0; } #else diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c index 2141454..a036a19 100644 --- a/drivers/leds/leds-lm3530.c +++ b/drivers/leds/leds-lm3530.c @@ -187,6 +187,40 @@ static void lm3530_als_configure(struct lm3530_platform_data *pdata, (pdata->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT); } +static int lm3530_led_enable(struct lm3530_data *drvdata) +{ + int ret; + + if (drvdata->enable) + return 0; + + ret = regulator_enable(drvdata->regulator); + if (ret) { + dev_err(drvdata->led_dev.dev, "Failed to enable vin:%d\n", ret); + return ret; + } + + drvdata->enable = true; + return 0; +} + +static void lm3530_led_disable(struct lm3530_data *drvdata) +{ + int ret; + + if (!drvdata->enable) + return; + + ret = regulator_disable(drvdata->regulator); + if (ret) { + dev_err(drvdata->led_dev.dev, "Failed to disable vin:%d\n", + ret); + return; + } + + drvdata->enable = false; +} + static int lm3530_init_registers(struct lm3530_data *drvdata) { int ret = 0; @@ -245,15 +279,9 @@ static int lm3530_init_registers(struct lm3530_data *drvdata) reg_val[12] = LM3530_DEF_ZT_3; /* LM3530_ALS_Z3T_REG */ reg_val[13] = LM3530_DEF_ZT_4; /* LM3530_ALS_Z4T_REG */ - if (!drvdata->enable) { - ret = regulator_enable(drvdata->regulator); - if (ret) { - dev_err(&drvdata->client->dev, - "Enable regulator failed\n"); - return ret; - } - drvdata->enable = true; - } + ret = lm3530_led_enable(drvdata); + if (ret) + return ret; for (i = 0; i < LM3530_REG_MAX; i++) { /* do not update brightness register when pwm mode */ @@ -305,13 +333,8 @@ static void lm3530_brightness_set(struct led_classdev *led_cdev, else drvdata->brightness = brt_val; - if (brt_val == 0) { - err = regulator_disable(drvdata->regulator); - if (err) - dev_err(&drvdata->client->dev, - "Disable regulator failed\n"); - drvdata->enable = false; - } + if (brt_val == 0) + lm3530_led_disable(drvdata); break; case LM3530_BL_MODE_ALS: break; @@ -458,8 +481,7 @@ static int lm3530_remove(struct i2c_client *client) device_remove_file(drvdata->led_dev.dev, &dev_attr_mode); - if (drvdata->enable) - regulator_disable(drvdata->regulator); + lm3530_led_disable(drvdata); led_classdev_unregister(&drvdata->led_dev); return 0; } diff --git a/drivers/leds/leds-lm355x.c b/drivers/leds/leds-lm355x.c index 65d7928..4117235 100644 --- a/drivers/leds/leds-lm355x.c +++ b/drivers/leds/leds-lm355x.c @@ -380,7 +380,7 @@ static void lm355x_indicator_brightness_set(struct led_classdev *cdev, /* indicator pattern only for lm3556*/ static ssize_t lm3556_indicator_pattern_store(struct device *dev, - struct device_attribute *devAttr, + struct device_attribute *attr, const char *buf, size_t size) { ssize_t ret; diff --git a/drivers/leds/leds-lm3642.c b/drivers/leds/leds-lm3642.c index 07b3dde..9f428d9 100644 --- a/drivers/leds/leds-lm3642.c +++ b/drivers/leds/leds-lm3642.c @@ -176,7 +176,7 @@ out: /* torch pin config for lm3642*/ static ssize_t lm3642_torch_pin_store(struct device *dev, - struct device_attribute *devAttr, + struct device_attribute *attr, const char *buf, size_t size) { ssize_t ret; @@ -233,7 +233,7 @@ static void lm3642_torch_brightness_set(struct led_classdev *cdev, /* strobe pin config for lm3642*/ static ssize_t lm3642_strobe_pin_store(struct device *dev, - struct device_attribute *devAttr, + struct device_attribute *attr, const char *buf, size_t size) { ssize_t ret; diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c index cb8a522..1001347 100644 --- a/drivers/leds/leds-lp5521.c +++ b/drivers/leds/leds-lp5521.c @@ -2,8 +2,10 @@ * LP5521 LED chip driver. * * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2012 Texas Instruments * * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> + * Milo(Woogyom) Kim <milo.kim@ti.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -20,33 +22,21 @@ * 02110-1301 USA */ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/i2c.h> -#include <linux/mutex.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> #include <linux/delay.h> -#include <linux/ctype.h> -#include <linux/spinlock.h> -#include <linux/wait.h> +#include <linux/firmware.h> +#include <linux/i2c.h> +#include <linux/init.h> #include <linux/leds.h> -#include <linux/leds-lp5521.h> -#include <linux/workqueue.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_data/leds-lp55xx.h> #include <linux/slab.h> -#define LP5521_PROGRAM_LENGTH 32 /* in bytes */ - -#define LP5521_MAX_LEDS 3 /* Maximum number of LEDs */ -#define LP5521_MAX_ENGINES 3 /* Maximum number of engines */ - -#define LP5521_ENG_MASK_BASE 0x30 /* 00110000 */ -#define LP5521_ENG_STATUS_MASK 0x07 /* 00000111 */ +#include "leds-lp55xx-common.h" -#define LP5521_CMD_LOAD 0x15 /* 00010101 */ -#define LP5521_CMD_RUN 0x2a /* 00101010 */ -#define LP5521_CMD_DIRECT 0x3f /* 00111111 */ -#define LP5521_CMD_DISABLED 0x00 /* 00000000 */ +#define LP5521_PROGRAM_LENGTH 32 +#define LP5521_MAX_LEDS 3 +#define LP5521_CMD_DIRECT 0x3F /* Registers */ #define LP5521_REG_ENABLE 0x00 @@ -58,22 +48,14 @@ #define LP5521_REG_G_CURRENT 0x06 #define LP5521_REG_B_CURRENT 0x07 #define LP5521_REG_CONFIG 0x08 -#define LP5521_REG_R_CHANNEL_PC 0x09 -#define LP5521_REG_G_CHANNEL_PC 0x0A -#define LP5521_REG_B_CHANNEL_PC 0x0B #define LP5521_REG_STATUS 0x0C #define LP5521_REG_RESET 0x0D -#define LP5521_REG_GPO 0x0E #define LP5521_REG_R_PROG_MEM 0x10 #define LP5521_REG_G_PROG_MEM 0x30 #define LP5521_REG_B_PROG_MEM 0x50 -#define LP5521_PROG_MEM_BASE LP5521_REG_R_PROG_MEM -#define LP5521_PROG_MEM_SIZE 0x20 - /* Base register to set LED current */ #define LP5521_REG_LED_CURRENT_BASE LP5521_REG_R_CURRENT - /* Base register to set the brightness */ #define LP5521_REG_LED_PWM_BASE LP5521_REG_R_PWM @@ -92,440 +74,287 @@ /* default R channel current register value */ #define LP5521_REG_R_CURR_DEFAULT 0xAF -/* Pattern Mode */ -#define PATTERN_OFF 0 +/* Reset register value */ +#define LP5521_RESET 0xFF -struct lp5521_engine { - int id; - u8 mode; - u8 prog_page; - u8 engine_mask; -}; +/* Program Memory Operations */ +#define LP5521_MODE_R_M 0x30 /* Operation Mode Register */ +#define LP5521_MODE_G_M 0x0C +#define LP5521_MODE_B_M 0x03 +#define LP5521_LOAD_R 0x10 +#define LP5521_LOAD_G 0x04 +#define LP5521_LOAD_B 0x01 -struct lp5521_led { - int id; - u8 chan_nr; - u8 led_current; - u8 max_current; - struct led_classdev cdev; - struct work_struct brightness_work; - u8 brightness; -}; +#define LP5521_R_IS_LOADING(mode) \ + ((mode & LP5521_MODE_R_M) == LP5521_LOAD_R) +#define LP5521_G_IS_LOADING(mode) \ + ((mode & LP5521_MODE_G_M) == LP5521_LOAD_G) +#define LP5521_B_IS_LOADING(mode) \ + ((mode & LP5521_MODE_B_M) == LP5521_LOAD_B) -struct lp5521_chip { - struct lp5521_platform_data *pdata; - struct mutex lock; /* Serialize control */ - struct i2c_client *client; - struct lp5521_engine engines[LP5521_MAX_ENGINES]; - struct lp5521_led leds[LP5521_MAX_LEDS]; - u8 num_channels; - u8 num_leds; -}; +#define LP5521_EXEC_R_M 0x30 /* Enable Register */ +#define LP5521_EXEC_G_M 0x0C +#define LP5521_EXEC_B_M 0x03 +#define LP5521_EXEC_M 0x3F +#define LP5521_RUN_R 0x20 +#define LP5521_RUN_G 0x08 +#define LP5521_RUN_B 0x02 -static inline struct lp5521_led *cdev_to_led(struct led_classdev *cdev) +static inline void lp5521_wait_opmode_done(void) { - return container_of(cdev, struct lp5521_led, cdev); + /* operation mode change needs to be longer than 153 us */ + usleep_range(200, 300); } -static inline struct lp5521_chip *engine_to_lp5521(struct lp5521_engine *engine) +static inline void lp5521_wait_enable_done(void) { - return container_of(engine, struct lp5521_chip, - engines[engine->id - 1]); + /* it takes more 488 us to update ENABLE register */ + usleep_range(500, 600); } -static inline struct lp5521_chip *led_to_lp5521(struct lp5521_led *led) +static void lp5521_set_led_current(struct lp55xx_led *led, u8 led_current) { - return container_of(led, struct lp5521_chip, - leds[led->id]); + led->led_current = led_current; + lp55xx_write(led->chip, LP5521_REG_LED_CURRENT_BASE + led->chan_nr, + led_current); } -static void lp5521_led_brightness_work(struct work_struct *work); - -static inline int lp5521_write(struct i2c_client *client, u8 reg, u8 value) +static void lp5521_load_engine(struct lp55xx_chip *chip) { - return i2c_smbus_write_byte_data(client, reg, value); -} + enum lp55xx_engine_index idx = chip->engine_idx; + u8 mask[] = { + [LP55XX_ENGINE_1] = LP5521_MODE_R_M, + [LP55XX_ENGINE_2] = LP5521_MODE_G_M, + [LP55XX_ENGINE_3] = LP5521_MODE_B_M, + }; -static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf) -{ - s32 ret; + u8 val[] = { + [LP55XX_ENGINE_1] = LP5521_LOAD_R, + [LP55XX_ENGINE_2] = LP5521_LOAD_G, + [LP55XX_ENGINE_3] = LP5521_LOAD_B, + }; - ret = i2c_smbus_read_byte_data(client, reg); - if (ret < 0) - return ret; + lp55xx_update_bits(chip, LP5521_REG_OP_MODE, mask[idx], val[idx]); - *buf = ret; - return 0; + lp5521_wait_opmode_done(); } -static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode) +static void lp5521_stop_engine(struct lp55xx_chip *chip) { - struct lp5521_chip *chip = engine_to_lp5521(engine); - struct i2c_client *client = chip->client; - int ret; - u8 engine_state; - - /* Only transition between RUN and DIRECT mode are handled here */ - if (mode == LP5521_CMD_LOAD) - return 0; - - if (mode == LP5521_CMD_DISABLED) - mode = LP5521_CMD_DIRECT; - - ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state); - if (ret < 0) - return ret; - - /* set mode only for this engine */ - engine_state &= ~(engine->engine_mask); - mode &= engine->engine_mask; - engine_state |= mode; - return lp5521_write(client, LP5521_REG_OP_MODE, engine_state); + lp55xx_write(chip, LP5521_REG_OP_MODE, 0); + lp5521_wait_opmode_done(); } -static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern) +static void lp5521_run_engine(struct lp55xx_chip *chip, bool start) { - struct lp5521_chip *chip = engine_to_lp5521(eng); - struct i2c_client *client = chip->client; int ret; - int addr; u8 mode; + u8 exec; - /* move current engine to direct mode and remember the state */ - ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT); - if (ret) - return ret; - - /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ - usleep_range(1000, 2000); - ret = lp5521_read(client, LP5521_REG_OP_MODE, &mode); - if (ret) - return ret; - - /* For loading, all the engines to load mode */ - lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); - /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ - usleep_range(1000, 2000); - lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD); - /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ - usleep_range(1000, 2000); - - addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE; - i2c_smbus_write_i2c_block_data(client, - addr, - LP5521_PROG_MEM_SIZE, - pattern); - - return lp5521_write(client, LP5521_REG_OP_MODE, mode); -} - -static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr) -{ - return lp5521_write(chip->client, - LP5521_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr, - curr); -} - -static void lp5521_init_engine(struct lp5521_chip *chip) -{ - int i; - for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { - chip->engines[i].id = i + 1; - chip->engines[i].engine_mask = LP5521_ENG_MASK_BASE >> (i * 2); - chip->engines[i].prog_page = i; + /* stop engine */ + if (!start) { + lp5521_stop_engine(chip); + lp55xx_write(chip, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); + lp5521_wait_opmode_done(); + return; } -} - -static int lp5521_configure(struct i2c_client *client) -{ - struct lp5521_chip *chip = i2c_get_clientdata(client); - int ret; - u8 cfg; - - lp5521_init_engine(chip); - - /* Set all PWMs to direct control mode */ - ret = lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); - - cfg = chip->pdata->update_config ? - : (LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT); - ret |= lp5521_write(client, LP5521_REG_CONFIG, cfg); - - /* Initialize all channels PWM to zero -> leds off */ - ret |= lp5521_write(client, LP5521_REG_R_PWM, 0); - ret |= lp5521_write(client, LP5521_REG_G_PWM, 0); - ret |= lp5521_write(client, LP5521_REG_B_PWM, 0); - - /* Set engines are set to run state when OP_MODE enables engines */ - ret |= lp5521_write(client, LP5521_REG_ENABLE, - LP5521_ENABLE_RUN_PROGRAM); - /* enable takes 500us. 1 - 2 ms leaves some margin */ - usleep_range(1000, 2000); - - return ret; -} - -static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf) -{ - int ret; - u8 status; - - ret = lp5521_read(chip->client, LP5521_REG_STATUS, &status); - if (ret < 0) - return ret; - - /* Check that ext clock is really in use if requested */ - if (chip->pdata && chip->pdata->clock_mode == LP5521_CLOCK_EXT) - if ((status & LP5521_EXT_CLK_USED) == 0) - return -EIO; - return 0; -} - -static void lp5521_set_brightness(struct led_classdev *cdev, - enum led_brightness brightness) -{ - struct lp5521_led *led = cdev_to_led(cdev); - led->brightness = (u8)brightness; - schedule_work(&led->brightness_work); -} - -static void lp5521_led_brightness_work(struct work_struct *work) -{ - struct lp5521_led *led = container_of(work, - struct lp5521_led, - brightness_work); - struct lp5521_chip *chip = led_to_lp5521(led); - struct i2c_client *client = chip->client; - mutex_lock(&chip->lock); - lp5521_write(client, LP5521_REG_LED_PWM_BASE + led->chan_nr, - led->brightness); - mutex_unlock(&chip->lock); -} - -/* Detect the chip by setting its ENABLE register and reading it back. */ -static int lp5521_detect(struct i2c_client *client) -{ - int ret; - u8 buf; + /* + * To run the engine, + * operation mode and enable register should updated at the same time + */ - ret = lp5521_write(client, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT); + ret = lp55xx_read(chip, LP5521_REG_OP_MODE, &mode); if (ret) - return ret; - /* enable takes 500us. 1 - 2 ms leaves some margin */ - usleep_range(1000, 2000); - ret = lp5521_read(client, LP5521_REG_ENABLE, &buf); - if (ret) - return ret; - if (buf != LP5521_ENABLE_DEFAULT) - return -ENODEV; + return; - return 0; -} + ret = lp55xx_read(chip, LP5521_REG_ENABLE, &exec); + if (ret) + return; -/* Set engine mode and create appropriate sysfs attributes, if required. */ -static int lp5521_set_mode(struct lp5521_engine *engine, u8 mode) -{ - int ret = 0; + /* change operation mode to RUN only when each engine is loading */ + if (LP5521_R_IS_LOADING(mode)) { + mode = (mode & ~LP5521_MODE_R_M) | LP5521_RUN_R; + exec = (exec & ~LP5521_EXEC_R_M) | LP5521_RUN_R; + } - /* if in that mode already do nothing, except for run */ - if (mode == engine->mode && mode != LP5521_CMD_RUN) - return 0; + if (LP5521_G_IS_LOADING(mode)) { + mode = (mode & ~LP5521_MODE_G_M) | LP5521_RUN_G; + exec = (exec & ~LP5521_EXEC_G_M) | LP5521_RUN_G; + } - if (mode == LP5521_CMD_RUN) { - ret = lp5521_set_engine_mode(engine, LP5521_CMD_RUN); - } else if (mode == LP5521_CMD_LOAD) { - lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); - lp5521_set_engine_mode(engine, LP5521_CMD_LOAD); - } else if (mode == LP5521_CMD_DISABLED) { - lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); + if (LP5521_B_IS_LOADING(mode)) { + mode = (mode & ~LP5521_MODE_B_M) | LP5521_RUN_B; + exec = (exec & ~LP5521_EXEC_B_M) | LP5521_RUN_B; } - engine->mode = mode; + lp55xx_write(chip, LP5521_REG_OP_MODE, mode); + lp5521_wait_opmode_done(); - return ret; + lp55xx_update_bits(chip, LP5521_REG_ENABLE, LP5521_EXEC_M, exec); + lp5521_wait_enable_done(); } -static int lp5521_do_store_load(struct lp5521_engine *engine, - const char *buf, size_t len) +static int lp5521_update_program_memory(struct lp55xx_chip *chip, + const u8 *data, size_t size) { - struct lp5521_chip *chip = engine_to_lp5521(engine); - struct i2c_client *client = chip->client; - int ret, nrchars, offset = 0, i = 0; - char c[3]; - unsigned cmd; + enum lp55xx_engine_index idx = chip->engine_idx; u8 pattern[LP5521_PROGRAM_LENGTH] = {0}; + u8 addr[] = { + [LP55XX_ENGINE_1] = LP5521_REG_R_PROG_MEM, + [LP55XX_ENGINE_2] = LP5521_REG_G_PROG_MEM, + [LP55XX_ENGINE_3] = LP5521_REG_B_PROG_MEM, + }; + unsigned cmd; + char c[3]; + int program_size; + int nrchars; + int offset = 0; + int ret; + int i; - while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) { + /* clear program memory before updating */ + for (i = 0; i < LP5521_PROGRAM_LENGTH; i++) + lp55xx_write(chip, addr[idx] + i, 0); + + i = 0; + while ((offset < size - 1) && (i < LP5521_PROGRAM_LENGTH)) { /* separate sscanfs because length is working only for %s */ - ret = sscanf(buf + offset, "%2s%n ", c, &nrchars); - if (ret != 2) - goto fail; + ret = sscanf(data + offset, "%2s%n ", c, &nrchars); + if (ret != 1) + goto err; + ret = sscanf(c, "%2x", &cmd); if (ret != 1) - goto fail; - pattern[i] = (u8)cmd; + goto err; + pattern[i] = (u8)cmd; offset += nrchars; i++; } /* Each instruction is 16bit long. Check that length is even */ if (i % 2) - goto fail; + goto err; - mutex_lock(&chip->lock); - if (engine->mode == LP5521_CMD_LOAD) - ret = lp5521_load_program(engine, pattern); - else - ret = -EINVAL; - mutex_unlock(&chip->lock); + program_size = i; + for (i = 0; i < program_size; i++) + lp55xx_write(chip, addr[idx] + i, pattern[i]); - if (ret) { - dev_err(&client->dev, "failed loading pattern\n"); - return ret; - } + return 0; - return len; -fail: - dev_err(&client->dev, "wrong pattern format\n"); +err: + dev_err(&chip->cl->dev, "wrong pattern format\n"); return -EINVAL; } -static ssize_t store_engine_load(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len, int nr) +static void lp5521_firmware_loaded(struct lp55xx_chip *chip) { - struct i2c_client *client = to_i2c_client(dev); - struct lp5521_chip *chip = i2c_get_clientdata(client); - return lp5521_do_store_load(&chip->engines[nr - 1], buf, len); -} + const struct firmware *fw = chip->fw; -#define store_load(nr) \ -static ssize_t store_engine##nr##_load(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t len) \ -{ \ - return store_engine_load(dev, attr, buf, len, nr); \ -} -store_load(1) -store_load(2) -store_load(3) - -static ssize_t show_engine_mode(struct device *dev, - struct device_attribute *attr, - char *buf, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lp5521_chip *chip = i2c_get_clientdata(client); - switch (chip->engines[nr - 1].mode) { - case LP5521_CMD_RUN: - return sprintf(buf, "run\n"); - case LP5521_CMD_LOAD: - return sprintf(buf, "load\n"); - case LP5521_CMD_DISABLED: - return sprintf(buf, "disabled\n"); - default: - return sprintf(buf, "disabled\n"); + if (fw->size > LP5521_PROGRAM_LENGTH) { + dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n", + fw->size); + return; } -} -#define show_mode(nr) \ -static ssize_t show_engine##nr##_mode(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_engine_mode(dev, attr, buf, nr); \ + /* + * Program momery sequence + * 1) set engine mode to "LOAD" + * 2) write firmware data into program memory + */ + + lp5521_load_engine(chip); + lp5521_update_program_memory(chip, fw->data, fw->size); } -show_mode(1) -show_mode(2) -show_mode(3) -static ssize_t store_engine_mode(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len, int nr) +static int lp5521_post_init_device(struct lp55xx_chip *chip) { - struct i2c_client *client = to_i2c_client(dev); - struct lp5521_chip *chip = i2c_get_clientdata(client); - struct lp5521_engine *engine = &chip->engines[nr - 1]; - mutex_lock(&chip->lock); + int ret; + u8 val; - if (!strncmp(buf, "run", 3)) - lp5521_set_mode(engine, LP5521_CMD_RUN); - else if (!strncmp(buf, "load", 4)) - lp5521_set_mode(engine, LP5521_CMD_LOAD); - else if (!strncmp(buf, "disabled", 8)) - lp5521_set_mode(engine, LP5521_CMD_DISABLED); + /* + * Make sure that the chip is reset by reading back the r channel + * current reg. This is dummy read is required on some platforms - + * otherwise further access to the R G B channels in the + * LP5521_REG_ENABLE register will not have any effect - strange! + */ + ret = lp55xx_read(chip, LP5521_REG_R_CURRENT, &val); + if (ret) { + dev_err(&chip->cl->dev, "error in resetting chip\n"); + return ret; + } + if (val != LP5521_REG_R_CURR_DEFAULT) { + dev_err(&chip->cl->dev, + "unexpected data in register (expected 0x%x got 0x%x)\n", + LP5521_REG_R_CURR_DEFAULT, val); + ret = -EINVAL; + return ret; + } + usleep_range(10000, 20000); - mutex_unlock(&chip->lock); - return len; -} + /* Set all PWMs to direct control mode */ + ret = lp55xx_write(chip, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); -#define store_mode(nr) \ -static ssize_t store_engine##nr##_mode(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t len) \ -{ \ - return store_engine_mode(dev, attr, buf, len, nr); \ -} -store_mode(1) -store_mode(2) -store_mode(3) + val = chip->pdata->update_config ? + : (LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT); + ret = lp55xx_write(chip, LP5521_REG_CONFIG, val); + if (ret) + return ret; -static ssize_t show_max_current(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct lp5521_led *led = cdev_to_led(led_cdev); + /* Initialize all channels PWM to zero -> leds off */ + lp55xx_write(chip, LP5521_REG_R_PWM, 0); + lp55xx_write(chip, LP5521_REG_G_PWM, 0); + lp55xx_write(chip, LP5521_REG_B_PWM, 0); - return sprintf(buf, "%d\n", led->max_current); -} + /* Set engines are set to run state when OP_MODE enables engines */ + ret = lp55xx_write(chip, LP5521_REG_ENABLE, LP5521_ENABLE_RUN_PROGRAM); + if (ret) + return ret; -static ssize_t show_current(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct lp5521_led *led = cdev_to_led(led_cdev); + lp5521_wait_enable_done(); - return sprintf(buf, "%d\n", led->led_current); + return 0; } -static ssize_t store_current(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) +static int lp5521_run_selftest(struct lp55xx_chip *chip, char *buf) { - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct lp5521_led *led = cdev_to_led(led_cdev); - struct lp5521_chip *chip = led_to_lp5521(led); - ssize_t ret; - unsigned long curr; + struct lp55xx_platform_data *pdata = chip->pdata; + int ret; + u8 status; - if (kstrtoul(buf, 0, &curr)) - return -EINVAL; + ret = lp55xx_read(chip, LP5521_REG_STATUS, &status); + if (ret < 0) + return ret; - if (curr > led->max_current) - return -EINVAL; + if (pdata->clock_mode != LP55XX_CLOCK_EXT) + return 0; - mutex_lock(&chip->lock); - ret = lp5521_set_led_current(chip, led->id, curr); - mutex_unlock(&chip->lock); + /* Check that ext clock is really in use if requested */ + if ((status & LP5521_EXT_CLK_USED) == 0) + return -EIO; - if (ret < 0) - return ret; + return 0; +} - led->led_current = (u8)curr; +static void lp5521_led_brightness_work(struct work_struct *work) +{ + struct lp55xx_led *led = container_of(work, struct lp55xx_led, + brightness_work); + struct lp55xx_chip *chip = led->chip; - return len; + mutex_lock(&chip->lock); + lp55xx_write(chip, LP5521_REG_LED_PWM_BASE + led->chan_nr, + led->brightness); + mutex_unlock(&chip->lock); } static ssize_t lp5521_selftest(struct device *dev, struct device_attribute *attr, char *buf) { - struct i2c_client *client = to_i2c_client(dev); - struct lp5521_chip *chip = i2c_get_clientdata(client); + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; int ret; mutex_lock(&chip->lock); @@ -534,133 +363,11 @@ static ssize_t lp5521_selftest(struct device *dev, return sprintf(buf, "%s\n", ret ? "FAIL" : "OK"); } -static void lp5521_clear_program_memory(struct i2c_client *cl) -{ - int i; - u8 rgb_mem[] = { - LP5521_REG_R_PROG_MEM, - LP5521_REG_G_PROG_MEM, - LP5521_REG_B_PROG_MEM, - }; - - for (i = 0; i < ARRAY_SIZE(rgb_mem); i++) { - lp5521_write(cl, rgb_mem[i], 0); - lp5521_write(cl, rgb_mem[i] + 1, 0); - } -} - -static void lp5521_write_program_memory(struct i2c_client *cl, - u8 base, u8 *rgb, int size) -{ - int i; - - if (!rgb || size <= 0) - return; - - for (i = 0; i < size; i++) - lp5521_write(cl, base + i, *(rgb + i)); - - lp5521_write(cl, base + i, 0); - lp5521_write(cl, base + i + 1, 0); -} - -static inline struct lp5521_led_pattern *lp5521_get_pattern - (struct lp5521_chip *chip, u8 offset) -{ - struct lp5521_led_pattern *ptn; - ptn = chip->pdata->patterns + (offset - 1); - return ptn; -} - -static void lp5521_run_led_pattern(int mode, struct lp5521_chip *chip) -{ - struct lp5521_led_pattern *ptn; - struct i2c_client *cl = chip->client; - int num_patterns = chip->pdata->num_patterns; - - if (mode > num_patterns || !(chip->pdata->patterns)) - return; - - if (mode == PATTERN_OFF) { - lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT); - usleep_range(1000, 2000); - lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); - } else { - ptn = lp5521_get_pattern(chip, mode); - if (!ptn) - return; - - lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_LOAD); - usleep_range(1000, 2000); - - lp5521_clear_program_memory(cl); - - lp5521_write_program_memory(cl, LP5521_REG_R_PROG_MEM, - ptn->r, ptn->size_r); - lp5521_write_program_memory(cl, LP5521_REG_G_PROG_MEM, - ptn->g, ptn->size_g); - lp5521_write_program_memory(cl, LP5521_REG_B_PROG_MEM, - ptn->b, ptn->size_b); - - lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_RUN); - usleep_range(1000, 2000); - lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_RUN_PROGRAM); - } -} - -static ssize_t store_led_pattern(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct lp5521_chip *chip = i2c_get_clientdata(to_i2c_client(dev)); - unsigned long val; - int ret; - - ret = kstrtoul(buf, 16, &val); - if (ret) - return ret; - - lp5521_run_led_pattern(val, chip); - - return len; -} - -/* led class device attributes */ -static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, show_current, store_current); -static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL); - -static struct attribute *lp5521_led_attributes[] = { - &dev_attr_led_current.attr, - &dev_attr_max_current.attr, - NULL, -}; - -static struct attribute_group lp5521_led_attribute_group = { - .attrs = lp5521_led_attributes -}; - /* device attributes */ -static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUSR, - show_engine1_mode, store_engine1_mode); -static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUSR, - show_engine2_mode, store_engine2_mode); -static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUSR, - show_engine3_mode, store_engine3_mode); -static DEVICE_ATTR(engine1_load, S_IWUSR, NULL, store_engine1_load); -static DEVICE_ATTR(engine2_load, S_IWUSR, NULL, store_engine2_load); -static DEVICE_ATTR(engine3_load, S_IWUSR, NULL, store_engine3_load); static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL); -static DEVICE_ATTR(led_pattern, S_IWUSR, NULL, store_led_pattern); static struct attribute *lp5521_attributes[] = { - &dev_attr_engine1_mode.attr, - &dev_attr_engine2_mode.attr, - &dev_attr_engine3_mode.attr, &dev_attr_selftest.attr, - &dev_attr_engine1_load.attr, - &dev_attr_engine2_load.attr, - &dev_attr_engine3_load.attr, - &dev_attr_led_pattern.attr, NULL }; @@ -668,217 +375,91 @@ static const struct attribute_group lp5521_group = { .attrs = lp5521_attributes, }; -static int lp5521_register_sysfs(struct i2c_client *client) -{ - struct device *dev = &client->dev; - return sysfs_create_group(&dev->kobj, &lp5521_group); -} - -static void lp5521_unregister_sysfs(struct i2c_client *client) -{ - struct lp5521_chip *chip = i2c_get_clientdata(client); - struct device *dev = &client->dev; - int i; - - sysfs_remove_group(&dev->kobj, &lp5521_group); - - for (i = 0; i < chip->num_leds; i++) - sysfs_remove_group(&chip->leds[i].cdev.dev->kobj, - &lp5521_led_attribute_group); -} - -static int lp5521_init_led(struct lp5521_led *led, - struct i2c_client *client, - int chan, struct lp5521_platform_data *pdata) -{ - struct device *dev = &client->dev; - char name[32]; - int res; - - if (chan >= LP5521_MAX_LEDS) - return -EINVAL; - - if (pdata->led_config[chan].led_current == 0) - return 0; - - led->led_current = pdata->led_config[chan].led_current; - led->max_current = pdata->led_config[chan].max_current; - led->chan_nr = pdata->led_config[chan].chan_nr; - - if (led->chan_nr >= LP5521_MAX_LEDS) { - dev_err(dev, "Use channel numbers between 0 and %d\n", - LP5521_MAX_LEDS - 1); - return -EINVAL; - } - - led->cdev.brightness_set = lp5521_set_brightness; - if (pdata->led_config[chan].name) { - led->cdev.name = pdata->led_config[chan].name; - } else { - snprintf(name, sizeof(name), "%s:channel%d", - pdata->label ?: client->name, chan); - led->cdev.name = name; - } - - res = led_classdev_register(dev, &led->cdev); - if (res < 0) { - dev_err(dev, "couldn't register led on channel %d\n", chan); - return res; - } - - res = sysfs_create_group(&led->cdev.dev->kobj, - &lp5521_led_attribute_group); - if (res < 0) { - dev_err(dev, "couldn't register current attribute\n"); - led_classdev_unregister(&led->cdev); - return res; - } - return 0; -} +/* Chip specific configurations */ +static struct lp55xx_device_config lp5521_cfg = { + .reset = { + .addr = LP5521_REG_RESET, + .val = LP5521_RESET, + }, + .enable = { + .addr = LP5521_REG_ENABLE, + .val = LP5521_ENABLE_DEFAULT, + }, + .max_channel = LP5521_MAX_LEDS, + .post_init_device = lp5521_post_init_device, + .brightness_work_fn = lp5521_led_brightness_work, + .set_led_current = lp5521_set_led_current, + .firmware_cb = lp5521_firmware_loaded, + .run_engine = lp5521_run_engine, + .dev_attr_group = &lp5521_group, +}; static int lp5521_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct lp5521_chip *chip; - struct lp5521_platform_data *pdata; - int ret, i, led; - u8 buf; - - chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; - - i2c_set_clientdata(client, chip); - chip->client = client; - - pdata = client->dev.platform_data; + int ret; + struct lp55xx_chip *chip; + struct lp55xx_led *led; + struct lp55xx_platform_data *pdata = client->dev.platform_data; if (!pdata) { dev_err(&client->dev, "no platform data\n"); return -EINVAL; } - mutex_init(&chip->lock); - - chip->pdata = pdata; - - if (pdata->setup_resources) { - ret = pdata->setup_resources(); - if (ret < 0) - return ret; - } + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; - if (pdata->enable) { - pdata->enable(0); - usleep_range(1000, 2000); /* Keep enable down at least 1ms */ - pdata->enable(1); - usleep_range(1000, 2000); /* 500us abs min. */ - } + led = devm_kzalloc(&client->dev, + sizeof(*led) * pdata->num_channels, GFP_KERNEL); + if (!led) + return -ENOMEM; - lp5521_write(client, LP5521_REG_RESET, 0xff); - usleep_range(10000, 20000); /* - * Exact value is not available. 10 - 20ms - * appears to be enough for reset. - */ + chip->cl = client; + chip->pdata = pdata; + chip->cfg = &lp5521_cfg; - /* - * Make sure that the chip is reset by reading back the r channel - * current reg. This is dummy read is required on some platforms - - * otherwise further access to the R G B channels in the - * LP5521_REG_ENABLE register will not have any effect - strange! - */ - ret = lp5521_read(client, LP5521_REG_R_CURRENT, &buf); - if (ret) { - dev_err(&client->dev, "error in resetting chip\n"); - goto fail2; - } - if (buf != LP5521_REG_R_CURR_DEFAULT) { - dev_err(&client->dev, - "unexpected data in register (expected 0x%x got 0x%x)\n", - LP5521_REG_R_CURR_DEFAULT, buf); - ret = -EINVAL; - goto fail2; - } - usleep_range(10000, 20000); + mutex_init(&chip->lock); - ret = lp5521_detect(client); + i2c_set_clientdata(client, led); - if (ret) { - dev_err(&client->dev, "Chip not found\n"); - goto fail2; - } + ret = lp55xx_init_device(chip); + if (ret) + goto err_init; dev_info(&client->dev, "%s programmable led chip found\n", id->name); - ret = lp5521_configure(client); - if (ret < 0) { - dev_err(&client->dev, "error configuring chip\n"); - goto fail1; - } - - /* Initialize leds */ - chip->num_channels = pdata->num_channels; - chip->num_leds = 0; - led = 0; - for (i = 0; i < pdata->num_channels; i++) { - /* Do not initialize channels that are not connected */ - if (pdata->led_config[i].led_current == 0) - continue; - - ret = lp5521_init_led(&chip->leds[led], client, i, pdata); - if (ret) { - dev_err(&client->dev, "error initializing leds\n"); - goto fail2; - } - chip->num_leds++; - - chip->leds[led].id = led; - /* Set initial LED current */ - lp5521_set_led_current(chip, led, - chip->leds[led].led_current); - - INIT_WORK(&(chip->leds[led].brightness_work), - lp5521_led_brightness_work); - - led++; - } + ret = lp55xx_register_leds(led, chip); + if (ret) + goto err_register_leds; - ret = lp5521_register_sysfs(client); + ret = lp55xx_register_sysfs(chip); if (ret) { dev_err(&client->dev, "registering sysfs failed\n"); - goto fail2; - } - return ret; -fail2: - for (i = 0; i < chip->num_leds; i++) { - led_classdev_unregister(&chip->leds[i].cdev); - cancel_work_sync(&chip->leds[i].brightness_work); + goto err_register_sysfs; } -fail1: - if (pdata->enable) - pdata->enable(0); - if (pdata->release_resources) - pdata->release_resources(); + + return 0; + +err_register_sysfs: + lp55xx_unregister_leds(led, chip); +err_register_leds: + lp55xx_deinit_device(chip); +err_init: return ret; } static int lp5521_remove(struct i2c_client *client) { - struct lp5521_chip *chip = i2c_get_clientdata(client); - int i; + struct lp55xx_led *led = i2c_get_clientdata(client); + struct lp55xx_chip *chip = led->chip; - lp5521_run_led_pattern(PATTERN_OFF, chip); - lp5521_unregister_sysfs(client); - - for (i = 0; i < chip->num_leds; i++) { - led_classdev_unregister(&chip->leds[i].cdev); - cancel_work_sync(&chip->leds[i].brightness_work); - } + lp5521_stop_engine(chip); + lp55xx_unregister_sysfs(chip); + lp55xx_unregister_leds(led, chip); + lp55xx_deinit_device(chip); - if (chip->pdata->enable) - chip->pdata->enable(0); - if (chip->pdata->release_resources) - chip->pdata->release_resources(); return 0; } @@ -900,5 +481,6 @@ static struct i2c_driver lp5521_driver = { module_i2c_driver(lp5521_driver); MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo"); +MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>"); MODULE_DESCRIPTION("LP5521 LED engine"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index 7f5be89..229f734 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -2,8 +2,10 @@ * lp5523.c - LP5523 LED Driver * * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2012 Texas Instruments * * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> + * Milo(Woogyom) Kim <milo.kim@ti.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -20,502 +22,351 @@ * 02110-1301 USA */ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/i2c.h> -#include <linux/mutex.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> #include <linux/delay.h> -#include <linux/ctype.h> -#include <linux/spinlock.h> -#include <linux/wait.h> +#include <linux/firmware.h> +#include <linux/i2c.h> +#include <linux/init.h> #include <linux/leds.h> -#include <linux/leds-lp5523.h> -#include <linux/workqueue.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_data/leds-lp55xx.h> #include <linux/slab.h> +#include "leds-lp55xx-common.h" + +#define LP5523_PROGRAM_LENGTH 32 +#define LP5523_MAX_LEDS 9 + +/* Registers */ #define LP5523_REG_ENABLE 0x00 #define LP5523_REG_OP_MODE 0x01 -#define LP5523_REG_RATIOMETRIC_MSB 0x02 -#define LP5523_REG_RATIOMETRIC_LSB 0x03 #define LP5523_REG_ENABLE_LEDS_MSB 0x04 #define LP5523_REG_ENABLE_LEDS_LSB 0x05 -#define LP5523_REG_LED_CNTRL_BASE 0x06 #define LP5523_REG_LED_PWM_BASE 0x16 #define LP5523_REG_LED_CURRENT_BASE 0x26 #define LP5523_REG_CONFIG 0x36 -#define LP5523_REG_CHANNEL1_PC 0x37 -#define LP5523_REG_CHANNEL2_PC 0x38 -#define LP5523_REG_CHANNEL3_PC 0x39 -#define LP5523_REG_STATUS 0x3a -#define LP5523_REG_GPO 0x3b -#define LP5523_REG_VARIABLE 0x3c -#define LP5523_REG_RESET 0x3d -#define LP5523_REG_TEMP_CTRL 0x3e -#define LP5523_REG_TEMP_READ 0x3f -#define LP5523_REG_TEMP_WRITE 0x40 +#define LP5523_REG_STATUS 0x3A +#define LP5523_REG_RESET 0x3D #define LP5523_REG_LED_TEST_CTRL 0x41 #define LP5523_REG_LED_TEST_ADC 0x42 -#define LP5523_REG_ENG1_VARIABLE 0x45 -#define LP5523_REG_ENG2_VARIABLE 0x46 -#define LP5523_REG_ENG3_VARIABLE 0x47 -#define LP5523_REG_MASTER_FADER1 0x48 -#define LP5523_REG_MASTER_FADER2 0x49 -#define LP5523_REG_MASTER_FADER3 0x4a -#define LP5523_REG_CH1_PROG_START 0x4c -#define LP5523_REG_CH2_PROG_START 0x4d -#define LP5523_REG_CH3_PROG_START 0x4e -#define LP5523_REG_PROG_PAGE_SEL 0x4f +#define LP5523_REG_PROG_PAGE_SEL 0x4F #define LP5523_REG_PROG_MEM 0x50 -#define LP5523_CMD_LOAD 0x15 /* 00010101 */ -#define LP5523_CMD_RUN 0x2a /* 00101010 */ -#define LP5523_CMD_DISABLED 0x00 /* 00000000 */ - +/* Bit description in registers */ #define LP5523_ENABLE 0x40 #define LP5523_AUTO_INC 0x40 #define LP5523_PWR_SAVE 0x20 #define LP5523_PWM_PWR_SAVE 0x04 -#define LP5523_CP_1 0x08 -#define LP5523_CP_1_5 0x10 #define LP5523_CP_AUTO 0x18 -#define LP5523_INT_CLK 0x01 #define LP5523_AUTO_CLK 0x02 + #define LP5523_EN_LEDTEST 0x80 #define LP5523_LEDTEST_DONE 0x80 - -#define LP5523_DEFAULT_CURRENT 50 /* microAmps */ -#define LP5523_PROGRAM_LENGTH 32 /* in bytes */ -#define LP5523_PROGRAM_PAGES 6 +#define LP5523_RESET 0xFF #define LP5523_ADC_SHORTCIRC_LIM 80 - -#define LP5523_LEDS 9 -#define LP5523_ENGINES 3 - -#define LP5523_ENG_MASK_BASE 0x30 /* 00110000 */ - -#define LP5523_ENG_STATUS_MASK 0x07 /* 00000111 */ - -#define LP5523_IRQ_FLAGS IRQF_TRIGGER_FALLING - #define LP5523_EXT_CLK_USED 0x08 -#define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led))) -#define SHIFT_MASK(id) (((id) - 1) * 2) +/* Memory Page Selection */ +#define LP5523_PAGE_ENG1 0 +#define LP5523_PAGE_ENG2 1 +#define LP5523_PAGE_ENG3 2 + +/* Program Memory Operations */ +#define LP5523_MODE_ENG1_M 0x30 /* Operation Mode Register */ +#define LP5523_MODE_ENG2_M 0x0C +#define LP5523_MODE_ENG3_M 0x03 +#define LP5523_LOAD_ENG1 0x10 +#define LP5523_LOAD_ENG2 0x04 +#define LP5523_LOAD_ENG3 0x01 + +#define LP5523_ENG1_IS_LOADING(mode) \ + ((mode & LP5523_MODE_ENG1_M) == LP5523_LOAD_ENG1) +#define LP5523_ENG2_IS_LOADING(mode) \ + ((mode & LP5523_MODE_ENG2_M) == LP5523_LOAD_ENG2) +#define LP5523_ENG3_IS_LOADING(mode) \ + ((mode & LP5523_MODE_ENG3_M) == LP5523_LOAD_ENG3) + +#define LP5523_EXEC_ENG1_M 0x30 /* Enable Register */ +#define LP5523_EXEC_ENG2_M 0x0C +#define LP5523_EXEC_ENG3_M 0x03 +#define LP5523_EXEC_M 0x3F +#define LP5523_RUN_ENG1 0x20 +#define LP5523_RUN_ENG2 0x08 +#define LP5523_RUN_ENG3 0x02 enum lp5523_chip_id { LP5523, LP55231, }; -struct lp5523_engine { - int id; - u8 mode; - u8 prog_page; - u8 mux_page; - u16 led_mux; - u8 engine_mask; -}; - -struct lp5523_led { - int id; - u8 chan_nr; - u8 led_current; - u8 max_current; - struct led_classdev cdev; - struct work_struct brightness_work; - u8 brightness; -}; - -struct lp5523_chip { - struct mutex lock; /* Serialize control */ - struct i2c_client *client; - struct lp5523_engine engines[LP5523_ENGINES]; - struct lp5523_led leds[LP5523_LEDS]; - struct lp5523_platform_data *pdata; - u8 num_channels; - u8 num_leds; -}; - -static inline struct lp5523_led *cdev_to_led(struct led_classdev *cdev) +static inline void lp5523_wait_opmode_done(void) { - return container_of(cdev, struct lp5523_led, cdev); -} - -static inline struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine) -{ - return container_of(engine, struct lp5523_chip, - engines[engine->id - 1]); -} - -static inline struct lp5523_chip *led_to_lp5523(struct lp5523_led *led) -{ - return container_of(led, struct lp5523_chip, - leds[led->id]); + usleep_range(1000, 2000); } -static void lp5523_set_mode(struct lp5523_engine *engine, u8 mode); -static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode); -static int lp5523_load_program(struct lp5523_engine *engine, const u8 *pattern); - -static void lp5523_led_brightness_work(struct work_struct *work); - -static int lp5523_write(struct i2c_client *client, u8 reg, u8 value) +static void lp5523_set_led_current(struct lp55xx_led *led, u8 led_current) { - return i2c_smbus_write_byte_data(client, reg, value); + led->led_current = led_current; + lp55xx_write(led->chip, LP5523_REG_LED_CURRENT_BASE + led->chan_nr, + led_current); } -static int lp5523_read(struct i2c_client *client, u8 reg, u8 *buf) -{ - s32 ret = i2c_smbus_read_byte_data(client, reg); - - if (ret < 0) - return ret; - - *buf = ret; - return 0; -} - -static int lp5523_detect(struct i2c_client *client) +static int lp5523_post_init_device(struct lp55xx_chip *chip) { int ret; - u8 buf; - ret = lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE); - if (ret) - return ret; - ret = lp5523_read(client, LP5523_REG_ENABLE, &buf); + ret = lp55xx_write(chip, LP5523_REG_ENABLE, LP5523_ENABLE); if (ret) return ret; - if (buf == 0x40) - return 0; - else - return -ENODEV; -} -static int lp5523_configure(struct i2c_client *client) -{ - struct lp5523_chip *chip = i2c_get_clientdata(client); - int ret = 0; - u8 status; - - /* one pattern per engine setting led mux start and stop addresses */ - static const u8 pattern[][LP5523_PROGRAM_LENGTH] = { - { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0}, - { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0}, - { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0}, - }; - - ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE); /* Chip startup time is 500 us, 1 - 2 ms gives some margin */ usleep_range(1000, 2000); - ret |= lp5523_write(client, LP5523_REG_CONFIG, + ret = lp55xx_write(chip, LP5523_REG_CONFIG, LP5523_AUTO_INC | LP5523_PWR_SAVE | LP5523_CP_AUTO | LP5523_AUTO_CLK | LP5523_PWM_PWR_SAVE); + if (ret) + return ret; /* turn on all leds */ - ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_MSB, 0x01); - ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_LSB, 0xff); - - /* hardcode 32 bytes of memory for each engine from program memory */ - ret |= lp5523_write(client, LP5523_REG_CH1_PROG_START, 0x00); - ret |= lp5523_write(client, LP5523_REG_CH2_PROG_START, 0x10); - ret |= lp5523_write(client, LP5523_REG_CH3_PROG_START, 0x20); - - /* write led mux address space for each channel */ - ret |= lp5523_load_program(&chip->engines[0], pattern[0]); - ret |= lp5523_load_program(&chip->engines[1], pattern[1]); - ret |= lp5523_load_program(&chip->engines[2], pattern[2]); - - if (ret) { - dev_err(&client->dev, "could not load mux programs\n"); - return -1; - } - - /* set all engines exec state and mode to run 00101010 */ - ret |= lp5523_write(client, LP5523_REG_ENABLE, - (LP5523_CMD_RUN | LP5523_ENABLE)); - - ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_RUN); - - if (ret) { - dev_err(&client->dev, "could not start mux programs\n"); - return -1; - } - - /* Let the programs run for couple of ms and check the engine status */ - usleep_range(3000, 6000); - ret = lp5523_read(client, LP5523_REG_STATUS, &status); - if (ret < 0) + ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_MSB, 0x01); + if (ret) return ret; - status &= LP5523_ENG_STATUS_MASK; - - if (status == LP5523_ENG_STATUS_MASK) { - dev_dbg(&client->dev, "all engines configured\n"); - } else { - dev_info(&client->dev, "status == %x\n", status); - dev_err(&client->dev, "cound not configure LED engine\n"); - return -1; - } - - dev_info(&client->dev, "disabling engines\n"); - - ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_DISABLED); - - return ret; + return lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_LSB, 0xff); } -static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode) +static void lp5523_load_engine(struct lp55xx_chip *chip) { - struct lp5523_chip *chip = engine_to_lp5523(engine); - struct i2c_client *client = chip->client; - int ret; - u8 engine_state; + enum lp55xx_engine_index idx = chip->engine_idx; + u8 mask[] = { + [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M, + [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M, + [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M, + }; - ret = lp5523_read(client, LP5523_REG_OP_MODE, &engine_state); - if (ret) - goto fail; + u8 val[] = { + [LP55XX_ENGINE_1] = LP5523_LOAD_ENG1, + [LP55XX_ENGINE_2] = LP5523_LOAD_ENG2, + [LP55XX_ENGINE_3] = LP5523_LOAD_ENG3, + }; - engine_state &= ~(engine->engine_mask); + u8 page_sel[] = { + [LP55XX_ENGINE_1] = LP5523_PAGE_ENG1, + [LP55XX_ENGINE_2] = LP5523_PAGE_ENG2, + [LP55XX_ENGINE_3] = LP5523_PAGE_ENG3, + }; - /* set mode only for this engine */ - mode &= engine->engine_mask; + lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]); - engine_state |= mode; + lp5523_wait_opmode_done(); - ret |= lp5523_write(client, LP5523_REG_OP_MODE, engine_state); -fail: - return ret; + lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]); } -static int lp5523_load_mux(struct lp5523_engine *engine, u16 mux) +static void lp5523_stop_engine(struct lp55xx_chip *chip) { - struct lp5523_chip *chip = engine_to_lp5523(engine); - struct i2c_client *client = chip->client; - int ret = 0; - - ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD); + lp55xx_write(chip, LP5523_REG_OP_MODE, 0); + lp5523_wait_opmode_done(); +} - ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, engine->mux_page); - ret |= lp5523_write(client, LP5523_REG_PROG_MEM, - (u8)(mux >> 8)); - ret |= lp5523_write(client, LP5523_REG_PROG_MEM + 1, (u8)(mux)); - engine->led_mux = mux; +static void lp5523_turn_off_channels(struct lp55xx_chip *chip) +{ + int i; - return ret; + for (i = 0; i < LP5523_MAX_LEDS; i++) + lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0); } -static int lp5523_load_program(struct lp5523_engine *engine, const u8 *pattern) +static void lp5523_run_engine(struct lp55xx_chip *chip, bool start) { - struct lp5523_chip *chip = engine_to_lp5523(engine); - struct i2c_client *client = chip->client; + int ret; + u8 mode; + u8 exec; - int ret = 0; + /* stop engine */ + if (!start) { + lp5523_stop_engine(chip); + lp5523_turn_off_channels(chip); + return; + } - ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD); + /* + * To run the engine, + * operation mode and enable register should updated at the same time + */ - ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, - engine->prog_page); - ret |= i2c_smbus_write_i2c_block_data(client, LP5523_REG_PROG_MEM, - LP5523_PROGRAM_LENGTH, pattern); + ret = lp55xx_read(chip, LP5523_REG_OP_MODE, &mode); + if (ret) + return; - return ret; -} + ret = lp55xx_read(chip, LP5523_REG_ENABLE, &exec); + if (ret) + return; -static int lp5523_run_program(struct lp5523_engine *engine) -{ - struct lp5523_chip *chip = engine_to_lp5523(engine); - struct i2c_client *client = chip->client; - int ret; + /* change operation mode to RUN only when each engine is loading */ + if (LP5523_ENG1_IS_LOADING(mode)) { + mode = (mode & ~LP5523_MODE_ENG1_M) | LP5523_RUN_ENG1; + exec = (exec & ~LP5523_EXEC_ENG1_M) | LP5523_RUN_ENG1; + } - ret = lp5523_write(client, LP5523_REG_ENABLE, - LP5523_CMD_RUN | LP5523_ENABLE); - if (ret) - goto fail; + if (LP5523_ENG2_IS_LOADING(mode)) { + mode = (mode & ~LP5523_MODE_ENG2_M) | LP5523_RUN_ENG2; + exec = (exec & ~LP5523_EXEC_ENG2_M) | LP5523_RUN_ENG2; + } - ret = lp5523_set_engine_mode(engine, LP5523_CMD_RUN); -fail: - return ret; + if (LP5523_ENG3_IS_LOADING(mode)) { + mode = (mode & ~LP5523_MODE_ENG3_M) | LP5523_RUN_ENG3; + exec = (exec & ~LP5523_EXEC_ENG3_M) | LP5523_RUN_ENG3; + } + + lp55xx_write(chip, LP5523_REG_OP_MODE, mode); + lp5523_wait_opmode_done(); + + lp55xx_update_bits(chip, LP5523_REG_ENABLE, LP5523_EXEC_M, exec); } -static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len) +static int lp5523_update_program_memory(struct lp55xx_chip *chip, + const u8 *data, size_t size) { + u8 pattern[LP5523_PROGRAM_LENGTH] = {0}; + unsigned cmd; + char c[3]; + int update_size; + int nrchars; + int offset = 0; + int ret; int i; - u16 tmp_mux = 0; - - len = min_t(int, len, LP5523_LEDS); - for (i = 0; i < len; i++) { - switch (buf[i]) { - case '1': - tmp_mux |= (1 << i); - break; - case '0': - break; - case '\n': - i = len; - break; - default: - return -1; - } - } - *mux = tmp_mux; - return 0; -} + /* clear program memory before updating */ + for (i = 0; i < LP5523_PROGRAM_LENGTH; i++) + lp55xx_write(chip, LP5523_REG_PROG_MEM + i, 0); -static void lp5523_mux_to_array(u16 led_mux, char *array) -{ - int i, pos = 0; - for (i = 0; i < LP5523_LEDS; i++) - pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i)); + i = 0; + while ((offset < size - 1) && (i < LP5523_PROGRAM_LENGTH)) { + /* separate sscanfs because length is working only for %s */ + ret = sscanf(data + offset, "%2s%n ", c, &nrchars); + if (ret != 1) + goto err; - array[pos] = '\0'; -} + ret = sscanf(c, "%2x", &cmd); + if (ret != 1) + goto err; -/*--------------------------------------------------------------*/ -/* Sysfs interface */ -/*--------------------------------------------------------------*/ + pattern[i] = (u8)cmd; + offset += nrchars; + i++; + } -static ssize_t show_engine_leds(struct device *dev, - struct device_attribute *attr, - char *buf, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lp5523_chip *chip = i2c_get_clientdata(client); - char mux[LP5523_LEDS + 1]; + /* Each instruction is 16bit long. Check that length is even */ + if (i % 2) + goto err; - lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux); + update_size = i; + for (i = 0; i < update_size; i++) + lp55xx_write(chip, LP5523_REG_PROG_MEM + i, pattern[i]); - return sprintf(buf, "%s\n", mux); -} + return 0; -#define show_leds(nr) \ -static ssize_t show_engine##nr##_leds(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_engine_leds(dev, attr, buf, nr); \ +err: + dev_err(&chip->cl->dev, "wrong pattern format\n"); + return -EINVAL; } -show_leds(1) -show_leds(2) -show_leds(3) -static ssize_t store_engine_leds(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len, int nr) +static void lp5523_firmware_loaded(struct lp55xx_chip *chip) { - struct i2c_client *client = to_i2c_client(dev); - struct lp5523_chip *chip = i2c_get_clientdata(client); - u16 mux = 0; - ssize_t ret; + const struct firmware *fw = chip->fw; - if (lp5523_mux_parse(buf, &mux, len)) - return -EINVAL; - - mutex_lock(&chip->lock); - ret = -EINVAL; - if (chip->engines[nr - 1].mode != LP5523_CMD_LOAD) - goto leave; + if (fw->size > LP5523_PROGRAM_LENGTH) { + dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n", + fw->size); + return; + } - if (lp5523_load_mux(&chip->engines[nr - 1], mux)) - goto leave; + /* + * Program momery sequence + * 1) set engine mode to "LOAD" + * 2) write firmware data into program memory + */ - ret = len; -leave: - mutex_unlock(&chip->lock); - return ret; + lp5523_load_engine(chip); + lp5523_update_program_memory(chip, fw->data, fw->size); } -#define store_leds(nr) \ -static ssize_t store_engine##nr##_leds(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t len) \ -{ \ - return store_engine_leds(dev, attr, buf, len, nr); \ -} -store_leds(1) -store_leds(2) -store_leds(3) - static ssize_t lp5523_selftest(struct device *dev, struct device_attribute *attr, char *buf) { - struct i2c_client *client = to_i2c_client(dev); - struct lp5523_chip *chip = i2c_get_clientdata(client); + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; + struct lp55xx_platform_data *pdata = chip->pdata; int i, ret, pos = 0; - int led = 0; u8 status, adc, vdd; mutex_lock(&chip->lock); - ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status); + ret = lp55xx_read(chip, LP5523_REG_STATUS, &status); if (ret < 0) goto fail; /* Check that ext clock is really in use if requested */ - if ((chip->pdata) && (chip->pdata->clock_mode == LP5523_CLOCK_EXT)) + if (pdata->clock_mode == LP55XX_CLOCK_EXT) { if ((status & LP5523_EXT_CLK_USED) == 0) goto fail; + } /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */ - lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL, - LP5523_EN_LEDTEST | 16); + lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL, LP5523_EN_LEDTEST | 16); usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */ - ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status); + ret = lp55xx_read(chip, LP5523_REG_STATUS, &status); if (ret < 0) goto fail; if (!(status & LP5523_LEDTEST_DONE)) usleep_range(3000, 6000); /* Was not ready. Wait little bit */ - ret = lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd); + ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &vdd); if (ret < 0) goto fail; vdd--; /* There may be some fluctuation in measurement */ - for (i = 0; i < LP5523_LEDS; i++) { + for (i = 0; i < LP5523_MAX_LEDS; i++) { /* Skip non-existing channels */ - if (chip->pdata->led_config[i].led_current == 0) + if (pdata->led_config[i].led_current == 0) continue; /* Set default current */ - lp5523_write(chip->client, - LP5523_REG_LED_CURRENT_BASE + i, - chip->pdata->led_config[i].led_current); + lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i, + pdata->led_config[i].led_current); - lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff); + lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0xff); /* let current stabilize 2 - 4ms before measurements start */ usleep_range(2000, 4000); - lp5523_write(chip->client, - LP5523_REG_LED_TEST_CTRL, + lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL, LP5523_EN_LEDTEST | i); /* ADC conversion time is 2.7 ms typically */ usleep_range(3000, 6000); - ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status); + ret = lp55xx_read(chip, LP5523_REG_STATUS, &status); if (ret < 0) goto fail; if (!(status & LP5523_LEDTEST_DONE)) usleep_range(3000, 6000);/* Was not ready. Wait. */ - ret = lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc); + + ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &adc); if (ret < 0) goto fail; if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM) pos += sprintf(buf + pos, "LED %d FAIL\n", i); - lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0x00); + lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0x00); /* Restore current */ - lp5523_write(chip->client, - LP5523_REG_LED_CURRENT_BASE + i, - chip->leds[led].led_current); + lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i, + led->led_current); led++; } if (pos == 0) @@ -530,249 +381,22 @@ release_lock: return pos; } -static void lp5523_set_brightness(struct led_classdev *cdev, - enum led_brightness brightness) -{ - struct lp5523_led *led = cdev_to_led(cdev); - - led->brightness = (u8)brightness; - - schedule_work(&led->brightness_work); -} - static void lp5523_led_brightness_work(struct work_struct *work) { - struct lp5523_led *led = container_of(work, - struct lp5523_led, + struct lp55xx_led *led = container_of(work, struct lp55xx_led, brightness_work); - struct lp5523_chip *chip = led_to_lp5523(led); - struct i2c_client *client = chip->client; + struct lp55xx_chip *chip = led->chip; mutex_lock(&chip->lock); - - lp5523_write(client, LP5523_REG_LED_PWM_BASE + led->chan_nr, + lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + led->chan_nr, led->brightness); - - mutex_unlock(&chip->lock); -} - -static int lp5523_do_store_load(struct lp5523_engine *engine, - const char *buf, size_t len) -{ - struct lp5523_chip *chip = engine_to_lp5523(engine); - struct i2c_client *client = chip->client; - int ret, nrchars, offset = 0, i = 0; - char c[3]; - unsigned cmd; - u8 pattern[LP5523_PROGRAM_LENGTH] = {0}; - - if (engine->mode != LP5523_CMD_LOAD) - return -EINVAL; - - while ((offset < len - 1) && (i < LP5523_PROGRAM_LENGTH)) { - /* separate sscanfs because length is working only for %s */ - ret = sscanf(buf + offset, "%2s%n ", c, &nrchars); - ret = sscanf(c, "%2x", &cmd); - if (ret != 1) - goto fail; - pattern[i] = (u8)cmd; - - offset += nrchars; - i++; - } - - /* Each instruction is 16bit long. Check that length is even */ - if (i % 2) - goto fail; - - mutex_lock(&chip->lock); - ret = lp5523_load_program(engine, pattern); mutex_unlock(&chip->lock); - - if (ret) { - dev_err(&client->dev, "failed loading pattern\n"); - return ret; - } - - return len; -fail: - dev_err(&client->dev, "wrong pattern format\n"); - return -EINVAL; -} - -static ssize_t store_engine_load(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lp5523_chip *chip = i2c_get_clientdata(client); - return lp5523_do_store_load(&chip->engines[nr - 1], buf, len); } -#define store_load(nr) \ -static ssize_t store_engine##nr##_load(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t len) \ -{ \ - return store_engine_load(dev, attr, buf, len, nr); \ -} -store_load(1) -store_load(2) -store_load(3) - -static ssize_t show_engine_mode(struct device *dev, - struct device_attribute *attr, - char *buf, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lp5523_chip *chip = i2c_get_clientdata(client); - switch (chip->engines[nr - 1].mode) { - case LP5523_CMD_RUN: - return sprintf(buf, "run\n"); - case LP5523_CMD_LOAD: - return sprintf(buf, "load\n"); - case LP5523_CMD_DISABLED: - return sprintf(buf, "disabled\n"); - default: - return sprintf(buf, "disabled\n"); - } -} - -#define show_mode(nr) \ -static ssize_t show_engine##nr##_mode(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_engine_mode(dev, attr, buf, nr); \ -} -show_mode(1) -show_mode(2) -show_mode(3) - -static ssize_t store_engine_mode(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lp5523_chip *chip = i2c_get_clientdata(client); - struct lp5523_engine *engine = &chip->engines[nr - 1]; - mutex_lock(&chip->lock); - - if (!strncmp(buf, "run", 3)) - lp5523_set_mode(engine, LP5523_CMD_RUN); - else if (!strncmp(buf, "load", 4)) - lp5523_set_mode(engine, LP5523_CMD_LOAD); - else if (!strncmp(buf, "disabled", 8)) - lp5523_set_mode(engine, LP5523_CMD_DISABLED); - - mutex_unlock(&chip->lock); - return len; -} - -#define store_mode(nr) \ -static ssize_t store_engine##nr##_mode(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t len) \ -{ \ - return store_engine_mode(dev, attr, buf, len, nr); \ -} -store_mode(1) -store_mode(2) -store_mode(3) - -static ssize_t show_max_current(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct lp5523_led *led = cdev_to_led(led_cdev); - - return sprintf(buf, "%d\n", led->max_current); -} - -static ssize_t show_current(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct lp5523_led *led = cdev_to_led(led_cdev); - - return sprintf(buf, "%d\n", led->led_current); -} - -static ssize_t store_current(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t len) -{ - struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct lp5523_led *led = cdev_to_led(led_cdev); - struct lp5523_chip *chip = led_to_lp5523(led); - ssize_t ret; - unsigned long curr; - - if (kstrtoul(buf, 0, &curr)) - return -EINVAL; - - if (curr > led->max_current) - return -EINVAL; - - mutex_lock(&chip->lock); - ret = lp5523_write(chip->client, - LP5523_REG_LED_CURRENT_BASE + led->chan_nr, - (u8)curr); - mutex_unlock(&chip->lock); - - if (ret < 0) - return ret; - - led->led_current = (u8)curr; - - return len; -} - -/* led class device attributes */ -static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, show_current, store_current); -static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL); - -static struct attribute *lp5523_led_attributes[] = { - &dev_attr_led_current.attr, - &dev_attr_max_current.attr, - NULL, -}; - -static struct attribute_group lp5523_led_attribute_group = { - .attrs = lp5523_led_attributes -}; - -/* device attributes */ -static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUSR, - show_engine1_mode, store_engine1_mode); -static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUSR, - show_engine2_mode, store_engine2_mode); -static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUSR, - show_engine3_mode, store_engine3_mode); -static DEVICE_ATTR(engine1_leds, S_IRUGO | S_IWUSR, - show_engine1_leds, store_engine1_leds); -static DEVICE_ATTR(engine2_leds, S_IRUGO | S_IWUSR, - show_engine2_leds, store_engine2_leds); -static DEVICE_ATTR(engine3_leds, S_IRUGO | S_IWUSR, - show_engine3_leds, store_engine3_leds); -static DEVICE_ATTR(engine1_load, S_IWUSR, NULL, store_engine1_load); -static DEVICE_ATTR(engine2_load, S_IWUSR, NULL, store_engine2_load); -static DEVICE_ATTR(engine3_load, S_IWUSR, NULL, store_engine3_load); static DEVICE_ATTR(selftest, S_IRUGO, lp5523_selftest, NULL); static struct attribute *lp5523_attributes[] = { - &dev_attr_engine1_mode.attr, - &dev_attr_engine2_mode.attr, - &dev_attr_engine3_mode.attr, &dev_attr_selftest.attr, - &dev_attr_engine1_load.attr, - &dev_attr_engine1_leds.attr, - &dev_attr_engine2_load.attr, - &dev_attr_engine2_leds.attr, - &dev_attr_engine3_load.attr, - &dev_attr_engine3_leds.attr, NULL, }; @@ -780,252 +404,91 @@ static const struct attribute_group lp5523_group = { .attrs = lp5523_attributes, }; -static int lp5523_register_sysfs(struct i2c_client *client) -{ - struct device *dev = &client->dev; - int ret; - - ret = sysfs_create_group(&dev->kobj, &lp5523_group); - if (ret < 0) - return ret; - - return 0; -} - -static void lp5523_unregister_sysfs(struct i2c_client *client) -{ - struct lp5523_chip *chip = i2c_get_clientdata(client); - struct device *dev = &client->dev; - int i; - - sysfs_remove_group(&dev->kobj, &lp5523_group); - - for (i = 0; i < chip->num_leds; i++) - sysfs_remove_group(&chip->leds[i].cdev.dev->kobj, - &lp5523_led_attribute_group); -} - -/*--------------------------------------------------------------*/ -/* Set chip operating mode */ -/*--------------------------------------------------------------*/ -static void lp5523_set_mode(struct lp5523_engine *engine, u8 mode) -{ - /* if in that mode already do nothing, except for run */ - if (mode == engine->mode && mode != LP5523_CMD_RUN) - return; - - switch (mode) { - case LP5523_CMD_RUN: - lp5523_run_program(engine); - break; - case LP5523_CMD_LOAD: - lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED); - lp5523_set_engine_mode(engine, LP5523_CMD_LOAD); - break; - case LP5523_CMD_DISABLED: - lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED); - break; - default: - return; - } - - engine->mode = mode; -} - -/*--------------------------------------------------------------*/ -/* Probe, Attach, Remove */ -/*--------------------------------------------------------------*/ -static int __init lp5523_init_engine(struct lp5523_engine *engine, int id) -{ - if (id < 1 || id > LP5523_ENGINES) - return -1; - engine->id = id; - engine->engine_mask = LP5523_ENG_MASK_BASE >> SHIFT_MASK(id); - engine->prog_page = id - 1; - engine->mux_page = id + 2; - - return 0; -} +/* Chip specific configurations */ +static struct lp55xx_device_config lp5523_cfg = { + .reset = { + .addr = LP5523_REG_RESET, + .val = LP5523_RESET, + }, + .enable = { + .addr = LP5523_REG_ENABLE, + .val = LP5523_ENABLE, + }, + .max_channel = LP5523_MAX_LEDS, + .post_init_device = lp5523_post_init_device, + .brightness_work_fn = lp5523_led_brightness_work, + .set_led_current = lp5523_set_led_current, + .firmware_cb = lp5523_firmware_loaded, + .run_engine = lp5523_run_engine, + .dev_attr_group = &lp5523_group, +}; -static int lp5523_init_led(struct lp5523_led *led, struct device *dev, - int chan, struct lp5523_platform_data *pdata, - const char *chip_name) +static int lp5523_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - char name[32]; - int res; + int ret; + struct lp55xx_chip *chip; + struct lp55xx_led *led; + struct lp55xx_platform_data *pdata = client->dev.platform_data; - if (chan >= LP5523_LEDS) + if (!pdata) { + dev_err(&client->dev, "no platform data\n"); return -EINVAL; - - if (pdata->led_config[chan].led_current) { - led->led_current = pdata->led_config[chan].led_current; - led->max_current = pdata->led_config[chan].max_current; - led->chan_nr = pdata->led_config[chan].chan_nr; - - if (led->chan_nr >= LP5523_LEDS) { - dev_err(dev, "Use channel numbers between 0 and %d\n", - LP5523_LEDS - 1); - return -EINVAL; - } - - if (pdata->led_config[chan].name) { - led->cdev.name = pdata->led_config[chan].name; - } else { - snprintf(name, sizeof(name), "%s:channel%d", - pdata->label ? : chip_name, chan); - led->cdev.name = name; - } - - led->cdev.brightness_set = lp5523_set_brightness; - res = led_classdev_register(dev, &led->cdev); - if (res < 0) { - dev_err(dev, "couldn't register led on channel %d\n", - chan); - return res; - } - res = sysfs_create_group(&led->cdev.dev->kobj, - &lp5523_led_attribute_group); - if (res < 0) { - dev_err(dev, "couldn't register current attribute\n"); - led_classdev_unregister(&led->cdev); - return res; - } - } else { - led->led_current = 0; } - return 0; -} - -static int lp5523_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct lp5523_chip *chip; - struct lp5523_platform_data *pdata; - int ret, i, led; chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); if (!chip) return -ENOMEM; - i2c_set_clientdata(client, chip); - chip->client = client; + led = devm_kzalloc(&client->dev, + sizeof(*led) * pdata->num_channels, GFP_KERNEL); + if (!led) + return -ENOMEM; - pdata = client->dev.platform_data; - - if (!pdata) { - dev_err(&client->dev, "no platform data\n"); - return -EINVAL; - } + chip->cl = client; + chip->pdata = pdata; + chip->cfg = &lp5523_cfg; mutex_init(&chip->lock); - chip->pdata = pdata; + i2c_set_clientdata(client, led); - if (pdata->setup_resources) { - ret = pdata->setup_resources(); - if (ret < 0) - return ret; - } - - if (pdata->enable) { - pdata->enable(0); - usleep_range(1000, 2000); /* Keep enable down at least 1ms */ - pdata->enable(1); - usleep_range(1000, 2000); /* 500us abs min. */ - } - - lp5523_write(client, LP5523_REG_RESET, 0xff); - usleep_range(10000, 20000); /* - * Exact value is not available. 10 - 20ms - * appears to be enough for reset. - */ - ret = lp5523_detect(client); + ret = lp55xx_init_device(chip); if (ret) - goto fail1; + goto err_init; dev_info(&client->dev, "%s Programmable led chip found\n", id->name); - /* Initialize engines */ - for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { - ret = lp5523_init_engine(&chip->engines[i], i + 1); - if (ret) { - dev_err(&client->dev, "error initializing engine\n"); - goto fail1; - } - } - ret = lp5523_configure(client); - if (ret < 0) { - dev_err(&client->dev, "error configuring chip\n"); - goto fail1; - } - - /* Initialize leds */ - chip->num_channels = pdata->num_channels; - chip->num_leds = 0; - led = 0; - for (i = 0; i < pdata->num_channels; i++) { - /* Do not initialize channels that are not connected */ - if (pdata->led_config[i].led_current == 0) - continue; - - INIT_WORK(&chip->leds[led].brightness_work, - lp5523_led_brightness_work); - - ret = lp5523_init_led(&chip->leds[led], &client->dev, i, pdata, - id->name); - if (ret) { - dev_err(&client->dev, "error initializing leds\n"); - goto fail2; - } - chip->num_leds++; - - chip->leds[led].id = led; - /* Set LED current */ - lp5523_write(client, - LP5523_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr, - chip->leds[led].led_current); - - led++; - } + ret = lp55xx_register_leds(led, chip); + if (ret) + goto err_register_leds; - ret = lp5523_register_sysfs(client); + ret = lp55xx_register_sysfs(chip); if (ret) { dev_err(&client->dev, "registering sysfs failed\n"); - goto fail2; + goto err_register_sysfs; } - return ret; -fail2: - for (i = 0; i < chip->num_leds; i++) { - led_classdev_unregister(&chip->leds[i].cdev); - flush_work(&chip->leds[i].brightness_work); - } -fail1: - if (pdata->enable) - pdata->enable(0); - if (pdata->release_resources) - pdata->release_resources(); + + return 0; + +err_register_sysfs: + lp55xx_unregister_leds(led, chip); +err_register_leds: + lp55xx_deinit_device(chip); +err_init: return ret; } static int lp5523_remove(struct i2c_client *client) { - struct lp5523_chip *chip = i2c_get_clientdata(client); - int i; - - /* Disable engine mode */ - lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_DISABLED); + struct lp55xx_led *led = i2c_get_clientdata(client); + struct lp55xx_chip *chip = led->chip; - lp5523_unregister_sysfs(client); - - for (i = 0; i < chip->num_leds; i++) { - led_classdev_unregister(&chip->leds[i].cdev); - flush_work(&chip->leds[i].brightness_work); - } + lp5523_stop_engine(chip); + lp55xx_unregister_sysfs(chip); + lp55xx_unregister_leds(led, chip); + lp55xx_deinit_device(chip); - if (chip->pdata->enable) - chip->pdata->enable(0); - if (chip->pdata->release_resources) - chip->pdata->release_resources(); return 0; } @@ -1049,5 +512,6 @@ static struct i2c_driver lp5523_driver = { module_i2c_driver(lp5523_driver); MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>"); +MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>"); MODULE_DESCRIPTION("LP5523 LED engine"); MODULE_LICENSE("GPL"); diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c new file mode 100644 index 0000000..d9eb841 --- /dev/null +++ b/drivers/leds/leds-lp55xx-common.c @@ -0,0 +1,523 @@ +/* + * LP5521/LP5523/LP55231 Common Driver + * + * Copyright 2012 Texas Instruments + * + * Author: Milo(Woogyom) Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from leds-lp5521.c, leds-lp5523.c + */ + +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/platform_data/leds-lp55xx.h> + +#include "leds-lp55xx-common.h" + +static struct lp55xx_led *cdev_to_lp55xx_led(struct led_classdev *cdev) +{ + return container_of(cdev, struct lp55xx_led, cdev); +} + +static struct lp55xx_led *dev_to_lp55xx_led(struct device *dev) +{ + return cdev_to_lp55xx_led(dev_get_drvdata(dev)); +} + +static void lp55xx_reset_device(struct lp55xx_chip *chip) +{ + struct lp55xx_device_config *cfg = chip->cfg; + u8 addr = cfg->reset.addr; + u8 val = cfg->reset.val; + + /* no error checking here because no ACK from the device after reset */ + lp55xx_write(chip, addr, val); +} + +static int lp55xx_detect_device(struct lp55xx_chip *chip) +{ + struct lp55xx_device_config *cfg = chip->cfg; + u8 addr = cfg->enable.addr; + u8 val = cfg->enable.val; + int ret; + + ret = lp55xx_write(chip, addr, val); + if (ret) + return ret; + + usleep_range(1000, 2000); + + ret = lp55xx_read(chip, addr, &val); + if (ret) + return ret; + + if (val != cfg->enable.val) + return -ENODEV; + + return 0; +} + +static int lp55xx_post_init_device(struct lp55xx_chip *chip) +{ + struct lp55xx_device_config *cfg = chip->cfg; + + if (!cfg->post_init_device) + return 0; + + return cfg->post_init_device(chip); +} + +static ssize_t lp55xx_show_current(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct lp55xx_led *led = dev_to_lp55xx_led(dev); + + return sprintf(buf, "%d\n", led->led_current); +} + +static ssize_t lp55xx_store_current(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct lp55xx_led *led = dev_to_lp55xx_led(dev); + struct lp55xx_chip *chip = led->chip; + unsigned long curr; + + if (kstrtoul(buf, 0, &curr)) + return -EINVAL; + + if (curr > led->max_current) + return -EINVAL; + + if (!chip->cfg->set_led_current) + return len; + + mutex_lock(&chip->lock); + chip->cfg->set_led_current(led, (u8)curr); + mutex_unlock(&chip->lock); + + return len; +} + +static ssize_t lp55xx_show_max_current(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct lp55xx_led *led = dev_to_lp55xx_led(dev); + + return sprintf(buf, "%d\n", led->max_current); +} + +static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, lp55xx_show_current, + lp55xx_store_current); +static DEVICE_ATTR(max_current, S_IRUGO , lp55xx_show_max_current, NULL); + +static struct attribute *lp55xx_led_attributes[] = { + &dev_attr_led_current.attr, + &dev_attr_max_current.attr, + NULL, +}; + +static struct attribute_group lp55xx_led_attr_group = { + .attrs = lp55xx_led_attributes +}; + +static void lp55xx_set_brightness(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct lp55xx_led *led = cdev_to_lp55xx_led(cdev); + + led->brightness = (u8)brightness; + schedule_work(&led->brightness_work); +} + +static int lp55xx_init_led(struct lp55xx_led *led, + struct lp55xx_chip *chip, int chan) +{ + struct lp55xx_platform_data *pdata = chip->pdata; + struct lp55xx_device_config *cfg = chip->cfg; + struct device *dev = &chip->cl->dev; + char name[32]; + int ret; + int max_channel = cfg->max_channel; + + if (chan >= max_channel) { + dev_err(dev, "invalid channel: %d / %d\n", chan, max_channel); + return -EINVAL; + } + + if (pdata->led_config[chan].led_current == 0) + return 0; + + led->led_current = pdata->led_config[chan].led_current; + led->max_current = pdata->led_config[chan].max_current; + led->chan_nr = pdata->led_config[chan].chan_nr; + + if (led->chan_nr >= max_channel) { + dev_err(dev, "Use channel numbers between 0 and %d\n", + max_channel - 1); + return -EINVAL; + } + + led->cdev.brightness_set = lp55xx_set_brightness; + + if (pdata->led_config[chan].name) { + led->cdev.name = pdata->led_config[chan].name; + } else { + snprintf(name, sizeof(name), "%s:channel%d", + pdata->label ? : chip->cl->name, chan); + led->cdev.name = name; + } + + /* + * register led class device for each channel and + * add device attributes + */ + + ret = led_classdev_register(dev, &led->cdev); + if (ret) { + dev_err(dev, "led register err: %d\n", ret); + return ret; + } + + ret = sysfs_create_group(&led->cdev.dev->kobj, &lp55xx_led_attr_group); + if (ret) { + dev_err(dev, "led sysfs err: %d\n", ret); + led_classdev_unregister(&led->cdev); + return ret; + } + + return 0; +} + +static void lp55xx_firmware_loaded(const struct firmware *fw, void *context) +{ + struct lp55xx_chip *chip = context; + struct device *dev = &chip->cl->dev; + + if (!fw) { + dev_err(dev, "firmware request failed\n"); + goto out; + } + + /* handling firmware data is chip dependent */ + mutex_lock(&chip->lock); + + chip->fw = fw; + if (chip->cfg->firmware_cb) + chip->cfg->firmware_cb(chip); + + mutex_unlock(&chip->lock); + +out: + /* firmware should be released for other channel use */ + release_firmware(chip->fw); +} + +static int lp55xx_request_firmware(struct lp55xx_chip *chip) +{ + const char *name = chip->cl->name; + struct device *dev = &chip->cl->dev; + + return request_firmware_nowait(THIS_MODULE, true, name, dev, + GFP_KERNEL, chip, lp55xx_firmware_loaded); +} + +static ssize_t lp55xx_show_engine_select(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; + + return sprintf(buf, "%d\n", chip->engine_idx); +} + +static ssize_t lp55xx_store_engine_select(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; + unsigned long val; + int ret; + + if (kstrtoul(buf, 0, &val)) + return -EINVAL; + + /* select the engine to be run */ + + switch (val) { + case LP55XX_ENGINE_1: + case LP55XX_ENGINE_2: + case LP55XX_ENGINE_3: + mutex_lock(&chip->lock); + chip->engine_idx = val; + ret = lp55xx_request_firmware(chip); + mutex_unlock(&chip->lock); + break; + default: + dev_err(dev, "%lu: invalid engine index. (1, 2, 3)\n", val); + return -EINVAL; + } + + if (ret) { + dev_err(dev, "request firmware err: %d\n", ret); + return ret; + } + + return len; +} + +static inline void lp55xx_run_engine(struct lp55xx_chip *chip, bool start) +{ + if (chip->cfg->run_engine) + chip->cfg->run_engine(chip, start); +} + +static ssize_t lp55xx_store_engine_run(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); + struct lp55xx_chip *chip = led->chip; + unsigned long val; + + if (kstrtoul(buf, 0, &val)) + return -EINVAL; + + /* run or stop the selected engine */ + + if (val <= 0) { + lp55xx_run_engine(chip, false); + return len; + } + + mutex_lock(&chip->lock); + lp55xx_run_engine(chip, true); + mutex_unlock(&chip->lock); + + return len; +} + +static DEVICE_ATTR(select_engine, S_IRUGO | S_IWUSR, + lp55xx_show_engine_select, lp55xx_store_engine_select); +static DEVICE_ATTR(run_engine, S_IWUSR, NULL, lp55xx_store_engine_run); + +static struct attribute *lp55xx_engine_attributes[] = { + &dev_attr_select_engine.attr, + &dev_attr_run_engine.attr, + NULL, +}; + +static const struct attribute_group lp55xx_engine_attr_group = { + .attrs = lp55xx_engine_attributes, +}; + +int lp55xx_write(struct lp55xx_chip *chip, u8 reg, u8 val) +{ + return i2c_smbus_write_byte_data(chip->cl, reg, val); +} +EXPORT_SYMBOL_GPL(lp55xx_write); + +int lp55xx_read(struct lp55xx_chip *chip, u8 reg, u8 *val) +{ + s32 ret; + + ret = i2c_smbus_read_byte_data(chip->cl, reg); + if (ret < 0) + return ret; + + *val = ret; + return 0; +} +EXPORT_SYMBOL_GPL(lp55xx_read); + +int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg, u8 mask, u8 val) +{ + int ret; + u8 tmp; + + ret = lp55xx_read(chip, reg, &tmp); + if (ret) + return ret; + + tmp &= ~mask; + tmp |= val & mask; + + return lp55xx_write(chip, reg, tmp); +} +EXPORT_SYMBOL_GPL(lp55xx_update_bits); + +int lp55xx_init_device(struct lp55xx_chip *chip) +{ + struct lp55xx_platform_data *pdata; + struct lp55xx_device_config *cfg; + struct device *dev = &chip->cl->dev; + int ret = 0; + + WARN_ON(!chip); + + pdata = chip->pdata; + cfg = chip->cfg; + + if (!pdata || !cfg) + return -EINVAL; + + if (pdata->setup_resources) { + ret = pdata->setup_resources(); + if (ret < 0) { + dev_err(dev, "setup resoure err: %d\n", ret); + goto err; + } + } + + if (pdata->enable) { + pdata->enable(0); + usleep_range(1000, 2000); /* Keep enable down at least 1ms */ + pdata->enable(1); + usleep_range(1000, 2000); /* 500us abs min. */ + } + + lp55xx_reset_device(chip); + + /* + * Exact value is not available. 10 - 20ms + * appears to be enough for reset. + */ + usleep_range(10000, 20000); + + ret = lp55xx_detect_device(chip); + if (ret) { + dev_err(dev, "device detection err: %d\n", ret); + goto err; + } + + /* chip specific initialization */ + ret = lp55xx_post_init_device(chip); + if (ret) { + dev_err(dev, "post init device err: %d\n", ret); + goto err_post_init; + } + + return 0; + +err_post_init: + lp55xx_deinit_device(chip); +err: + return ret; +} +EXPORT_SYMBOL_GPL(lp55xx_init_device); + +void lp55xx_deinit_device(struct lp55xx_chip *chip) +{ + struct lp55xx_platform_data *pdata = chip->pdata; + + if (pdata->enable) + pdata->enable(0); + + if (pdata->release_resources) + pdata->release_resources(); +} +EXPORT_SYMBOL_GPL(lp55xx_deinit_device); + +int lp55xx_register_leds(struct lp55xx_led *led, struct lp55xx_chip *chip) +{ + struct lp55xx_platform_data *pdata = chip->pdata; + struct lp55xx_device_config *cfg = chip->cfg; + int num_channels = pdata->num_channels; + struct lp55xx_led *each; + u8 led_current; + int ret; + int i; + + if (!cfg->brightness_work_fn) { + dev_err(&chip->cl->dev, "empty brightness configuration\n"); + return -EINVAL; + } + + for (i = 0; i < num_channels; i++) { + + /* do not initialize channels that are not connected */ + if (pdata->led_config[i].led_current == 0) + continue; + + led_current = pdata->led_config[i].led_current; + each = led + i; + ret = lp55xx_init_led(each, chip, i); + if (ret) + goto err_init_led; + + INIT_WORK(&each->brightness_work, cfg->brightness_work_fn); + + chip->num_leds++; + each->chip = chip; + + /* setting led current at each channel */ + if (cfg->set_led_current) + cfg->set_led_current(each, led_current); + } + + return 0; + +err_init_led: + lp55xx_unregister_leds(led, chip); + return ret; +} +EXPORT_SYMBOL_GPL(lp55xx_register_leds); + +void lp55xx_unregister_leds(struct lp55xx_led *led, struct lp55xx_chip *chip) +{ + int i; + struct lp55xx_led *each; + + for (i = 0; i < chip->num_leds; i++) { + each = led + i; + led_classdev_unregister(&each->cdev); + flush_work(&each->brightness_work); + } +} +EXPORT_SYMBOL_GPL(lp55xx_unregister_leds); + +int lp55xx_register_sysfs(struct lp55xx_chip *chip) +{ + struct device *dev = &chip->cl->dev; + struct lp55xx_device_config *cfg = chip->cfg; + int ret; + + if (!cfg->run_engine || !cfg->firmware_cb) + goto dev_specific_attrs; + + ret = sysfs_create_group(&dev->kobj, &lp55xx_engine_attr_group); + if (ret) + return ret; + +dev_specific_attrs: + return cfg->dev_attr_group ? + sysfs_create_group(&dev->kobj, cfg->dev_attr_group) : 0; +} +EXPORT_SYMBOL_GPL(lp55xx_register_sysfs); + +void lp55xx_unregister_sysfs(struct lp55xx_chip *chip) +{ + struct device *dev = &chip->cl->dev; + struct lp55xx_device_config *cfg = chip->cfg; + + if (cfg->dev_attr_group) + sysfs_remove_group(&dev->kobj, cfg->dev_attr_group); + + sysfs_remove_group(&dev->kobj, &lp55xx_engine_attr_group); +} +EXPORT_SYMBOL_GPL(lp55xx_unregister_sysfs); + +MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>"); +MODULE_DESCRIPTION("LP55xx Common Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/leds/leds-lp55xx-common.h b/drivers/leds/leds-lp55xx-common.h new file mode 100644 index 0000000..ece4761 --- /dev/null +++ b/drivers/leds/leds-lp55xx-common.h @@ -0,0 +1,134 @@ +/* + * LP55XX Common Driver Header + * + * Copyright (C) 2012 Texas Instruments + * + * Author: Milo(Woogyom) Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * Derived from leds-lp5521.c, leds-lp5523.c + */ + +#ifndef _LEDS_LP55XX_COMMON_H +#define _LEDS_LP55XX_COMMON_H + +enum lp55xx_engine_index { + LP55XX_ENGINE_INVALID, + LP55XX_ENGINE_1, + LP55XX_ENGINE_2, + LP55XX_ENGINE_3, +}; + +struct lp55xx_led; +struct lp55xx_chip; + +/* + * struct lp55xx_reg + * @addr : Register address + * @val : Register value + */ +struct lp55xx_reg { + u8 addr; + u8 val; +}; + +/* + * struct lp55xx_device_config + * @reset : Chip specific reset command + * @enable : Chip specific enable command + * @max_channel : Maximum number of channels + * @post_init_device : Chip specific initialization code + * @brightness_work_fn : Brightness work function + * @set_led_current : LED current set function + * @firmware_cb : Call function when the firmware is loaded + * @run_engine : Run internal engine for pattern + * @dev_attr_group : Device specific attributes + */ +struct lp55xx_device_config { + const struct lp55xx_reg reset; + const struct lp55xx_reg enable; + const int max_channel; + + /* define if the device has specific initialization process */ + int (*post_init_device) (struct lp55xx_chip *chip); + + /* access brightness register */ + void (*brightness_work_fn)(struct work_struct *work); + + /* current setting function */ + void (*set_led_current) (struct lp55xx_led *led, u8 led_current); + + /* access program memory when the firmware is loaded */ + void (*firmware_cb)(struct lp55xx_chip *chip); + + /* used for running firmware LED patterns */ + void (*run_engine) (struct lp55xx_chip *chip, bool start); + + /* additional device specific attributes */ + const struct attribute_group *dev_attr_group; +}; + +/* + * struct lp55xx_chip + * @cl : I2C communication for access registers + * @pdata : Platform specific data + * @lock : Lock for user-space interface + * @num_leds : Number of registered LEDs + * @cfg : Device specific configuration data + * @engine_idx : Selected engine number + * @fw : Firmware data for running a LED pattern + */ +struct lp55xx_chip { + struct i2c_client *cl; + struct lp55xx_platform_data *pdata; + struct mutex lock; /* lock for user-space interface */ + int num_leds; + struct lp55xx_device_config *cfg; + enum lp55xx_engine_index engine_idx; + const struct firmware *fw; +}; + +/* + * struct lp55xx_led + * @chan_nr : Channel number + * @cdev : LED class device + * @led_current : Current setting at each led channel + * @max_current : Maximun current at each led channel + * @brightness_work : Workqueue for brightness control + * @brightness : Brightness value + * @chip : The lp55xx chip data + */ +struct lp55xx_led { + int chan_nr; + struct led_classdev cdev; + u8 led_current; + u8 max_current; + struct work_struct brightness_work; + u8 brightness; + struct lp55xx_chip *chip; +}; + +/* register access */ +extern int lp55xx_write(struct lp55xx_chip *chip, u8 reg, u8 val); +extern int lp55xx_read(struct lp55xx_chip *chip, u8 reg, u8 *val); +extern int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg, + u8 mask, u8 val); + +/* common device init/deinit functions */ +extern int lp55xx_init_device(struct lp55xx_chip *chip); +extern void lp55xx_deinit_device(struct lp55xx_chip *chip); + +/* common LED class device functions */ +extern int lp55xx_register_leds(struct lp55xx_led *led, + struct lp55xx_chip *chip); +extern void lp55xx_unregister_leds(struct lp55xx_led *led, + struct lp55xx_chip *chip); + +/* common device attributes functions */ +extern int lp55xx_register_sysfs(struct lp55xx_chip *chip); +extern void lp55xx_unregister_sysfs(struct lp55xx_chip *chip); + +#endif /* _LEDS_LP55XX_COMMON_H */ diff --git a/drivers/leds/leds-lp8788.c b/drivers/leds/leds-lp8788.c index 4353942..7c2cb38 100644 --- a/drivers/leds/leds-lp8788.c +++ b/drivers/leds/leds-lp8788.c @@ -130,9 +130,10 @@ static int lp8788_led_probe(struct platform_device *pdev) struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent); struct lp8788_led_platform_data *led_pdata; struct lp8788_led *led; + struct device *dev = &pdev->dev; int ret; - led = devm_kzalloc(lp->dev, sizeof(struct lp8788_led), GFP_KERNEL); + led = devm_kzalloc(dev, sizeof(struct lp8788_led), GFP_KERNEL); if (!led) return -ENOMEM; @@ -154,13 +155,13 @@ static int lp8788_led_probe(struct platform_device *pdev) ret = lp8788_led_init_device(led, led_pdata); if (ret) { - dev_err(lp->dev, "led init device err: %d\n", ret); + dev_err(dev, "led init device err: %d\n", ret); return ret; } - ret = led_classdev_register(lp->dev, &led->led_dev); + ret = led_classdev_register(dev, &led->led_dev); if (ret) { - dev_err(lp->dev, "led register err: %d\n", ret); + dev_err(dev, "led register err: %d\n", ret); return ret; } diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c index cee8a5b..0c597bd 100644 --- a/drivers/leds/leds-pca9532.c +++ b/drivers/leds/leds-pca9532.c @@ -186,7 +186,7 @@ static int pca9532_set_blink(struct led_classdev *led_cdev, int err = 0; if (*delay_on == 0 && *delay_off == 0) { - /* led subsystem ask us for a blink rate */ + /* led subsystem ask us for a blink rate */ *delay_on = 1000; *delay_off = 1000; } @@ -311,7 +311,6 @@ static int pca9532_destroy_devices(struct pca9532_data *data, int n_devs) break; case PCA9532_TYPE_N2100_BEEP: if (data->idev != NULL) { - input_unregister_device(data->idev); cancel_work_sync(&data->work); data->idev = NULL; } @@ -382,7 +381,7 @@ static int pca9532_configure(struct i2c_client *client, BUG_ON(data->idev); led->state = PCA9532_PWM1; pca9532_setled(led); - data->idev = input_allocate_device(); + data->idev = devm_input_allocate_device(&client->dev); if (data->idev == NULL) { err = -ENOMEM; goto exit; @@ -401,7 +400,6 @@ static int pca9532_configure(struct i2c_client *client, INIT_WORK(&data->work, pca9532_input_work); err = input_register_device(data->idev); if (err) { - input_free_device(data->idev); cancel_work_sync(&data->work); data->idev = NULL; goto exit; diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c index 2157524..a1ea5f6 100644 --- a/drivers/leds/leds-pwm.c +++ b/drivers/leds/leds-pwm.c @@ -16,6 +16,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/fb.h> #include <linux/leds.h> #include <linux/err.h> @@ -30,6 +31,11 @@ struct led_pwm_data { unsigned int period; }; +struct led_pwm_priv { + int num_leds; + struct led_pwm_data leds[0]; +}; + static void led_pwm_set(struct led_classdev *led_cdev, enum led_brightness brightness) { @@ -47,88 +53,152 @@ static void led_pwm_set(struct led_classdev *led_cdev, } } -static int led_pwm_probe(struct platform_device *pdev) +static inline size_t sizeof_pwm_leds_priv(int num_leds) { - struct led_pwm_platform_data *pdata = pdev->dev.platform_data; - struct led_pwm *cur_led; - struct led_pwm_data *leds_data, *led_dat; - int i, ret = 0; + return sizeof(struct led_pwm_priv) + + (sizeof(struct led_pwm_data) * num_leds); +} + +static struct led_pwm_priv *led_pwm_create_of(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct device_node *child; + struct led_pwm_priv *priv; + int count, ret; - if (!pdata) - return -EBUSY; + /* count LEDs in this device, so we know how much to allocate */ + count = of_get_child_count(node); + if (!count) + return NULL; - leds_data = devm_kzalloc(&pdev->dev, - sizeof(struct led_pwm_data) * pdata->num_leds, - GFP_KERNEL); - if (!leds_data) - return -ENOMEM; + priv = devm_kzalloc(&pdev->dev, sizeof_pwm_leds_priv(count), + GFP_KERNEL); + if (!priv) + return NULL; - for (i = 0; i < pdata->num_leds; i++) { - cur_led = &pdata->leds[i]; - led_dat = &leds_data[i]; + for_each_child_of_node(node, child) { + struct led_pwm_data *led_dat = &priv->leds[priv->num_leds]; - led_dat->pwm = pwm_request(cur_led->pwm_id, - cur_led->name); + led_dat->cdev.name = of_get_property(child, "label", + NULL) ? : child->name; + + led_dat->pwm = devm_of_pwm_get(&pdev->dev, child, NULL); if (IS_ERR(led_dat->pwm)) { - ret = PTR_ERR(led_dat->pwm); - dev_err(&pdev->dev, "unable to request PWM %d\n", - cur_led->pwm_id); + dev_err(&pdev->dev, "unable to request PWM for %s\n", + led_dat->cdev.name); goto err; } + /* Get the period from PWM core when n*/ + led_dat->period = pwm_get_period(led_dat->pwm); + + led_dat->cdev.default_trigger = of_get_property(child, + "linux,default-trigger", NULL); + of_property_read_u32(child, "max-brightness", + &led_dat->cdev.max_brightness); - led_dat->cdev.name = cur_led->name; - led_dat->cdev.default_trigger = cur_led->default_trigger; - led_dat->active_low = cur_led->active_low; - led_dat->period = cur_led->pwm_period_ns; led_dat->cdev.brightness_set = led_pwm_set; led_dat->cdev.brightness = LED_OFF; - led_dat->cdev.max_brightness = cur_led->max_brightness; led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; ret = led_classdev_register(&pdev->dev, &led_dat->cdev); if (ret < 0) { - pwm_free(led_dat->pwm); + dev_err(&pdev->dev, "failed to register for %s\n", + led_dat->cdev.name); + of_node_put(child); goto err; } + priv->num_leds++; } - platform_set_drvdata(pdev, leds_data); + return priv; +err: + while (priv->num_leds--) + led_classdev_unregister(&priv->leds[priv->num_leds].cdev); - return 0; + return NULL; +} -err: - if (i > 0) { - for (i = i - 1; i >= 0; i--) { - led_classdev_unregister(&leds_data[i].cdev); - pwm_free(leds_data[i].pwm); +static int led_pwm_probe(struct platform_device *pdev) +{ + struct led_pwm_platform_data *pdata = pdev->dev.platform_data; + struct led_pwm_priv *priv; + int i, ret = 0; + + if (pdata && pdata->num_leds) { + priv = devm_kzalloc(&pdev->dev, + sizeof_pwm_leds_priv(pdata->num_leds), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + for (i = 0; i < pdata->num_leds; i++) { + struct led_pwm *cur_led = &pdata->leds[i]; + struct led_pwm_data *led_dat = &priv->leds[i]; + + led_dat->pwm = devm_pwm_get(&pdev->dev, cur_led->name); + if (IS_ERR(led_dat->pwm)) { + ret = PTR_ERR(led_dat->pwm); + dev_err(&pdev->dev, + "unable to request PWM for %s\n", + cur_led->name); + goto err; + } + + led_dat->cdev.name = cur_led->name; + led_dat->cdev.default_trigger = cur_led->default_trigger; + led_dat->active_low = cur_led->active_low; + led_dat->period = cur_led->pwm_period_ns; + led_dat->cdev.brightness_set = led_pwm_set; + led_dat->cdev.brightness = LED_OFF; + led_dat->cdev.max_brightness = cur_led->max_brightness; + led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; + + ret = led_classdev_register(&pdev->dev, &led_dat->cdev); + if (ret < 0) + goto err; } + priv->num_leds = pdata->num_leds; + } else { + priv = led_pwm_create_of(pdev); + if (!priv) + return -ENODEV; } + platform_set_drvdata(pdev, priv); + + return 0; + +err: + while (i--) + led_classdev_unregister(&priv->leds[i].cdev); + return ret; } static int led_pwm_remove(struct platform_device *pdev) { + struct led_pwm_priv *priv = platform_get_drvdata(pdev); int i; - struct led_pwm_platform_data *pdata = pdev->dev.platform_data; - struct led_pwm_data *leds_data; - leds_data = platform_get_drvdata(pdev); - - for (i = 0; i < pdata->num_leds; i++) { - led_classdev_unregister(&leds_data[i].cdev); - pwm_free(leds_data[i].pwm); - } + for (i = 0; i < priv->num_leds; i++) + led_classdev_unregister(&priv->leds[i].cdev); return 0; } +static const struct of_device_id of_pwm_leds_match[] = { + { .compatible = "pwm-leds", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_pwm_leds_match); + static struct platform_driver led_pwm_driver = { .probe = led_pwm_probe, .remove = led_pwm_remove, .driver = { .name = "leds_pwm", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(of_pwm_leds_match), }, }; diff --git a/drivers/leds/leds-renesas-tpu.c b/drivers/leds/leds-renesas-tpu.c index e0fff1c..d3c2b7e 100644 --- a/drivers/leds/leds-renesas-tpu.c +++ b/drivers/leds/leds-renesas-tpu.c @@ -133,24 +133,24 @@ static int r_tpu_enable(struct r_tpu_priv *p, enum led_brightness brightness) rate = clk_get_rate(p->clk); /* pick the lowest acceptable rate */ - for (k = 0; k < ARRAY_SIZE(prescaler); k++) - if ((rate / prescaler[k]) < p->min_rate) + for (k = ARRAY_SIZE(prescaler) - 1; k >= 0; k--) + if ((rate / prescaler[k]) >= p->min_rate) break; - if (!k) { + if (k < 0) { dev_err(&p->pdev->dev, "clock rate mismatch\n"); goto err0; } dev_dbg(&p->pdev->dev, "rate = %lu, prescaler %u\n", - rate, prescaler[k - 1]); + rate, prescaler[k]); /* clear TCNT on TGRB match, count on rising edge, set prescaler */ - r_tpu_write(p, TCR, 0x0040 | (k - 1)); + r_tpu_write(p, TCR, 0x0040 | k); /* output 0 until TGRA, output 1 until TGRB */ r_tpu_write(p, TIOR, 0x0002); - rate /= prescaler[k - 1] * p->refresh_rate; + rate /= prescaler[k] * p->refresh_rate; r_tpu_write(p, TGRB, rate); dev_dbg(&p->pdev->dev, "TRGB = 0x%04lx\n", rate); diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c index ec9b287..64e204e 100644 --- a/drivers/leds/leds-ss4200.c +++ b/drivers/leds/leds-ss4200.c @@ -63,8 +63,7 @@ MODULE_LICENSE("GPL"); /* * PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives. */ -static const struct pci_device_id ich7_lpc_pci_id[] = -{ +static DEFINE_PCI_DEVICE_TABLE(ich7_lpc_pci_id) = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_30) }, diff --git a/drivers/leds/leds-sunfire.c b/drivers/leds/leds-sunfire.c index 07ff5a3..8979299 100644 --- a/drivers/leds/leds-sunfire.c +++ b/drivers/leds/leds-sunfire.c @@ -3,6 +3,8 @@ * Copyright (C) 2008 David S. Miller <davem@davemloft.net> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -14,9 +16,6 @@ #include <asm/fhc.h> #include <asm/upa.h> -#define DRIVER_NAME "leds-sunfire" -#define PFX DRIVER_NAME ": " - MODULE_AUTHOR("David S. Miller (davem@davemloft.net)"); MODULE_DESCRIPTION("Sun Fire LED driver"); MODULE_LICENSE("GPL"); @@ -130,14 +129,14 @@ static int sunfire_led_generic_probe(struct platform_device *pdev, int i, err; if (pdev->num_resources != 1) { - printk(KERN_ERR PFX "Wrong number of resources %d, should be 1\n", + dev_err(&pdev->dev, "Wrong number of resources %d, should be 1\n", pdev->num_resources); return -EINVAL; } p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); if (!p) { - printk(KERN_ERR PFX "Could not allocate struct sunfire_drvdata\n"); + dev_err(&pdev->dev, "Could not allocate struct sunfire_drvdata\n"); return -ENOMEM; } @@ -152,7 +151,7 @@ static int sunfire_led_generic_probe(struct platform_device *pdev, err = led_classdev_register(&pdev->dev, lp); if (err) { - printk(KERN_ERR PFX "Could not register %s LED\n", + dev_err(&pdev->dev, "Could not register %s LED\n", lp->name); for (i--; i >= 0; i--) led_classdev_unregister(&p->leds[i].led_cdev); @@ -188,7 +187,7 @@ static struct led_type clockboard_led_types[NUM_LEDS_PER_BOARD] = { { .name = "clockboard-right", .handler = clockboard_right_set, - .default_trigger= "heartbeat", + .default_trigger = "heartbeat", }, }; @@ -209,7 +208,7 @@ static struct led_type fhc_led_types[NUM_LEDS_PER_BOARD] = { { .name = "fhc-right", .handler = fhc_right_set, - .default_trigger= "heartbeat", + .default_trigger = "heartbeat", }, }; @@ -244,13 +243,13 @@ static int __init sunfire_leds_init(void) int err = platform_driver_register(&sunfire_clockboard_led_driver); if (err) { - printk(KERN_ERR PFX "Could not register clock board LED driver\n"); + pr_err("Could not register clock board LED driver\n"); return err; } err = platform_driver_register(&sunfire_fhc_led_driver); if (err) { - printk(KERN_ERR PFX "Could not register FHC LED driver\n"); + pr_err("Could not register FHC LED driver\n"); platform_driver_unregister(&sunfire_clockboard_led_driver); } diff --git a/drivers/leds/leds-tca6507.c b/drivers/leds/leds-tca6507.c index b26a63b..070ba07 100644 --- a/drivers/leds/leds-tca6507.c +++ b/drivers/leds/leds-tca6507.c @@ -667,8 +667,68 @@ static void tca6507_remove_gpio(struct tca6507_chip *tca) } #endif /* CONFIG_GPIOLIB */ +#ifdef CONFIG_OF +static struct tca6507_platform_data * +tca6507_led_dt_init(struct i2c_client *client) +{ + struct device_node *np = client->dev.of_node, *child; + struct tca6507_platform_data *pdata; + struct led_info *tca_leds; + int count; + + count = of_get_child_count(np); + if (!count || count > NUM_LEDS) + return ERR_PTR(-ENODEV); + + tca_leds = devm_kzalloc(&client->dev, + sizeof(struct led_info) * count, GFP_KERNEL); + if (!tca_leds) + return ERR_PTR(-ENOMEM); + + for_each_child_of_node(np, child) { + struct led_info led; + u32 reg; + int ret; + + led.name = + of_get_property(child, "label", NULL) ? : child->name; + led.default_trigger = + of_get_property(child, "linux,default-trigger", NULL); + + ret = of_property_read_u32(child, "reg", ®); + if (ret != 0) + continue; + + tca_leds[reg] = led; + } + pdata = devm_kzalloc(&client->dev, + sizeof(struct tca6507_platform_data), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + pdata->leds.leds = tca_leds; + pdata->leds.num_leds = count; + + return pdata; +} + +static const struct of_device_id of_tca6507_leds_match[] = { + { .compatible = "ti,tca6507", }, + {}, +}; + +#else +static struct tca6507_platform_data * +tca6507_led_dt_init(struct i2c_client *client) +{ + return ERR_PTR(-ENODEV); +} + +#define of_tca6507_leds_match NULL +#endif + static int tca6507_probe(struct i2c_client *client, - const struct i2c_device_id *id) + const struct i2c_device_id *id) { struct tca6507_chip *tca; struct i2c_adapter *adapter; @@ -683,9 +743,12 @@ static int tca6507_probe(struct i2c_client *client, return -EIO; if (!pdata || pdata->leds.num_leds != NUM_LEDS) { - dev_err(&client->dev, "Need %d entries in platform-data list\n", - NUM_LEDS); - return -ENODEV; + pdata = tca6507_led_dt_init(client); + if (IS_ERR(pdata)) { + dev_err(&client->dev, "Need %d entries in platform-data list\n", + NUM_LEDS); + return PTR_ERR(pdata); + } } tca = devm_kzalloc(&client->dev, sizeof(*tca), GFP_KERNEL); if (!tca) @@ -750,6 +813,7 @@ static struct i2c_driver tca6507_driver = { .driver = { .name = "leds-tca6507", .owner = THIS_MODULE, + .of_match_table = of_tca6507_leds_match, }, .probe = tca6507_probe, .remove = tca6507_remove, diff --git a/drivers/leds/leds-wm831x-status.c b/drivers/leds/leds-wm831x-status.c index 74a24cf..6bd5c67 100644 --- a/drivers/leds/leds-wm831x-status.c +++ b/drivers/leds/leds-wm831x-status.c @@ -157,7 +157,7 @@ static int wm831x_status_blink_set(struct led_classdev *led_cdev, return ret; } -static const char *led_src_texts[] = { +static const char * const led_src_texts[] = { "otp", "power", "charger", diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index 903138b..4a13da4 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -471,7 +471,7 @@ static struct pwm_chip *of_node_to_pwmchip(struct device_node *np) } /** - * of_pwm_request() - request a PWM via the PWM framework + * of_pwm_get() - request a PWM via the PWM framework * @np: device node to get the PWM from * @con_id: consumer name * @@ -486,8 +486,7 @@ static struct pwm_chip *of_node_to_pwmchip(struct device_node *np) * becomes mandatory for devices that look up the PWM device via the con_id * parameter. */ -static struct pwm_device *of_pwm_request(struct device_node *np, - const char *con_id) +struct pwm_device *of_pwm_get(struct device_node *np, const char *con_id) { struct pwm_device *pwm = NULL; struct of_phandle_args args; @@ -545,6 +544,7 @@ put: return pwm; } +EXPORT_SYMBOL_GPL(of_pwm_get); /** * pwm_add_table() - register PWM device consumers @@ -587,7 +587,7 @@ struct pwm_device *pwm_get(struct device *dev, const char *con_id) /* look up via DT first */ if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node) - return of_pwm_request(dev->of_node, con_id); + return of_pwm_get(dev->of_node, con_id); /* * We look up the provider in the static table typically provided by @@ -708,6 +708,36 @@ struct pwm_device *devm_pwm_get(struct device *dev, const char *con_id) } EXPORT_SYMBOL_GPL(devm_pwm_get); +/** + * devm_of_pwm_get() - resource managed of_pwm_get() + * @dev: device for PWM consumer + * @np: device node to get the PWM from + * @con_id: consumer name + * + * This function performs like of_pwm_get() but the acquired PWM device will + * automatically be released on driver detach. + */ +struct pwm_device *devm_of_pwm_get(struct device *dev, struct device_node *np, + const char *con_id) +{ + struct pwm_device **ptr, *pwm; + + ptr = devres_alloc(devm_pwm_release, sizeof(**ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + pwm = of_pwm_get(np, con_id); + if (!IS_ERR(pwm)) { + *ptr = pwm; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return pwm; +} +EXPORT_SYMBOL_GPL(devm_of_pwm_get); + static int devm_pwm_match(struct device *dev, void *res, void *data) { struct pwm_device **p = res; diff --git a/include/linux/leds-lp5521.h b/include/linux/leds-lp5521.h deleted file mode 100644 index 3f071ec..0000000 --- a/include/linux/leds-lp5521.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * LP5521 LED chip driver. - * - * Copyright (C) 2010 Nokia Corporation - * - * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - -#ifndef __LINUX_LP5521_H -#define __LINUX_LP5521_H - -/* See Documentation/leds/leds-lp5521.txt */ - -struct lp5521_led_config { - char *name; - u8 chan_nr; - u8 led_current; /* mA x10, 0 if led is not connected */ - u8 max_current; -}; - -struct lp5521_led_pattern { - u8 *r; - u8 *g; - u8 *b; - u8 size_r; - u8 size_g; - u8 size_b; -}; - -#define LP5521_CLOCK_AUTO 0 -#define LP5521_CLOCK_INT 1 -#define LP5521_CLOCK_EXT 2 - -/* Bits in CONFIG register */ -#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */ -#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */ -#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */ -#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */ -#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */ -#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */ -#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */ -#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */ -#define LP5521_CLK_INT 1 /* Internal clock */ -#define LP5521_CLK_AUTO 2 /* Automatic clock selection */ - -struct lp5521_platform_data { - struct lp5521_led_config *led_config; - u8 num_channels; - u8 clock_mode; - int (*setup_resources)(void); - void (*release_resources)(void); - void (*enable)(bool state); - const char *label; - u8 update_config; - struct lp5521_led_pattern *patterns; - int num_patterns; -}; - -#endif /* __LINUX_LP5521_H */ diff --git a/include/linux/leds-lp5523.h b/include/linux/leds-lp5523.h deleted file mode 100644 index 727877f..0000000 --- a/include/linux/leds-lp5523.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * LP5523 LED Driver - * - * Copyright (C) 2010 Nokia Corporation - * - * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - -#ifndef __LINUX_LP5523_H -#define __LINUX_LP5523_H - -/* See Documentation/leds/leds-lp5523.txt */ - -struct lp5523_led_config { - const char *name; - u8 chan_nr; - u8 led_current; /* mA x10, 0 if led is not connected */ - u8 max_current; -}; - -#define LP5523_CLOCK_AUTO 0 -#define LP5523_CLOCK_INT 1 -#define LP5523_CLOCK_EXT 2 - -struct lp5523_platform_data { - struct lp5523_led_config *led_config; - u8 num_channels; - u8 clock_mode; - int (*setup_resources)(void); - void (*release_resources)(void); - void (*enable)(bool state); - const char *label; -}; - -#endif /* __LINUX_LP5523_H */ diff --git a/include/linux/leds_pwm.h b/include/linux/leds_pwm.h index 33a0711..a65e964 100644 --- a/include/linux/leds_pwm.h +++ b/include/linux/leds_pwm.h @@ -7,7 +7,7 @@ struct led_pwm { const char *name; const char *default_trigger; - unsigned pwm_id; + unsigned pwm_id __deprecated; u8 active_low; unsigned max_brightness; unsigned pwm_period_ns; diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h new file mode 100644 index 0000000..1509570 --- /dev/null +++ b/include/linux/platform_data/leds-lp55xx.h @@ -0,0 +1,87 @@ +/* + * LP55XX Platform Data Header + * + * Copyright (C) 2012 Texas Instruments + * + * Author: Milo(Woogyom) Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * Derived from leds-lp5521.h, leds-lp5523.h + */ + +#ifndef _LEDS_LP55XX_H +#define _LEDS_LP55XX_H + +/* Clock configuration */ +#define LP55XX_CLOCK_AUTO 0 +#define LP55XX_CLOCK_INT 1 +#define LP55XX_CLOCK_EXT 2 + +/* Bits in LP5521 CONFIG register. 'update_config' in lp55xx_platform_data */ +#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */ +#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */ +#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */ +#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */ +#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */ +#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */ +#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */ +#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */ +#define LP5521_CLK_INT 1 /* Internal clock */ +#define LP5521_CLK_AUTO 2 /* Automatic clock selection */ + +struct lp55xx_led_config { + const char *name; + u8 chan_nr; + u8 led_current; /* mA x10, 0 if led is not connected */ + u8 max_current; +}; + +struct lp55xx_predef_pattern { + u8 *r; + u8 *g; + u8 *b; + u8 size_r; + u8 size_g; + u8 size_b; +}; + +/* + * struct lp55xx_platform_data + * @led_config : Configurable led class device + * @num_channels : Number of LED channels + * @label : Used for naming LEDs + * @clock_mode : Input clock mode. LP55XX_CLOCK_AUTO or _INT or _EXT + * @setup_resources : Platform specific function before enabling the chip + * @release_resources : Platform specific function after disabling the chip + * @enable : EN pin control by platform side + * @patterns : Predefined pattern data for RGB channels + * @num_patterns : Number of patterns + * @update_config : Value of CONFIG register + */ +struct lp55xx_platform_data { + + /* LED channel configuration */ + struct lp55xx_led_config *led_config; + u8 num_channels; + const char *label; + + /* Clock configuration */ + u8 clock_mode; + + /* Platform specific functions */ + int (*setup_resources)(void); + void (*release_resources)(void); + void (*enable)(bool state); + + /* Predefined pattern data */ + struct lp55xx_predef_pattern *patterns; + unsigned int num_patterns; + + /* _CONFIG register */ + u8 update_config; +}; + +#endif /* _LEDS_LP55XX_H */ diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 6d661f3..70655a2 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -174,10 +174,13 @@ struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip, struct pwm_device *of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args); -struct pwm_device *pwm_get(struct device *dev, const char *consumer); +struct pwm_device *pwm_get(struct device *dev, const char *con_id); +struct pwm_device *of_pwm_get(struct device_node *np, const char *con_id); void pwm_put(struct pwm_device *pwm); -struct pwm_device *devm_pwm_get(struct device *dev, const char *consumer); +struct pwm_device *devm_pwm_get(struct device *dev, const char *con_id); +struct pwm_device *devm_of_pwm_get(struct device *dev, struct device_node *np, + const char *con_id); void devm_pwm_put(struct device *dev, struct pwm_device *pwm); #else static inline int pwm_set_chip_data(struct pwm_device *pwm, void *data) @@ -213,6 +216,12 @@ static inline struct pwm_device *pwm_get(struct device *dev, return ERR_PTR(-ENODEV); } +static inline struct pwm_device *of_pwm_get(struct device_node *np, + const char *con_id) +{ + return ERR_PTR(-ENODEV); +} + static inline void pwm_put(struct pwm_device *pwm) { } @@ -223,6 +232,13 @@ static inline struct pwm_device *devm_pwm_get(struct device *dev, return ERR_PTR(-ENODEV); } +static inline struct pwm_device *devm_of_pwm_get(struct device *dev, + struct device_node *np, + const char *con_id) +{ + return ERR_PTR(-ENODEV); +} + static inline void devm_pwm_put(struct device *dev, struct pwm_device *pwm) { } |
